aboutsummaryrefslogtreecommitdiff
path: root/drivers/net
AgeCommit message (Collapse)Author
2006-10-24e1000: FIX: fix wrong txdctl threshold bitmasksBruce Allan
Threshold bitmasks for prefetch, host and writeback were clearing bits that they were not supposed to. The leftmost 2 bits in the byte for each threshold are reserved. Signed-off-by: Bruce Allan <bruce.w.allan@intel.com> Signed-off-by: Auke Kok <auke-jan.h.kok@intel.com>
2006-10-24e1000: FIX: 82542 doesn't support WoLAuke Kok
Exclude 82542 when setting up WoL. This card does not do WoL at all. Signed-off-by: Auke Kok <auke-jan.h.kok@intel.com>
2006-10-24e1000: FIX: don't poke at manageability registers for incompatible adaptersJesse Brandeburg
The MANC register should not be read for PCI-E adapters at all, as well as 82543 and older where 82543 would master abort when this register was accessed. Signed-off-by: Auke Kok <auke-jan.h.kok@intel.com>
2006-10-21[PATCH] ibmveth: Fix index increment calculationDavid Gibson
On Thu, Oct 12, 2006 at 06:22:14PM +1000, David Gibson wrote: > Your recent ibmveth commit, 751ae21c6cd1493e3d0a4935b08fb298b9d89773 > ("fix int rollover panic"), causes a rapid oops on my test machine > (POWER5 LPAR). > > I've bisected it down to that commit, but am still investigating the > cause of the crash itself. Found the problem, I believe: an object lesson in the need for great caution using ++. [...] @@ -213,6 +213,7 @@ static void ibmveth_replenish_buffer_poo } free_index = pool->consumer_index++ % pool->size; + pool->consumer_index = free_index; index = pool->free_map[free_index]; ibmveth_assert(index != IBM_VETH_INVALID_MAP); Since the ++ is used as post-increment, the increment is not included in free_index, and so the added line effectively reverts the increment. The produced_index side has an analagous bug. The following change corrects this: The recent commit 751ae21c6cd1493e3d0a4935b08fb298b9d89773 introduced a bug in the producer/consumer index calculation in the ibmveth driver - incautious use of the post-increment ++ operator resulted in an increment being immediately reverted. This patch corrects the logic. Without this patch, the driver oopses almost immediately after activation on at least some machines. Signed-off-by: David Gibson <dwg@au1.ibm.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-10-21Merge branch 'upstream-fixes' of ↵Jeff Garzik
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-2.6 into upstream-fixes
2006-10-21[PATCH] Fix timer raceRalf Baechle
When closing the driver or reinitializing the hardware there is the usual del_timer() race condition that exists when timers re-add themselves. Fix by conversion to del_timer_sync(). Signed-off-by: Ralf Baechle <ralf@linux-mips.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-10-21[PATCH] Remove useless comment from sb1250Dave Jones
Signed-off-by: Dave Jones <davej@redhat.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-10-21Merge tag 'jg-20061012-00' of ↵Jeff Garzik
git://electric-eye.fr.zoreil.com/home/romieu/linux-2.6 into tmp
2006-10-21[PATCH] ucc_geth: changes to ucc_geth driver as a result of qe_lib changes ↵Li Yang
and bugfixes changes due to qe_lib changes include: o removed inclusion of platform header file o removed platform_device code, replaced with of_device o removed typedefs o uint -> u32 conversions o removed following defines: QE_SIZEOF_BD, BD_BUFFER_ARG, BD_BUFFER_CLEAR, BD_BUFFER, BD_STATUS_AND_LENGTH_SET, BD_STATUS_AND_LENGTH, and BD_BUFFER_SET because they hid sizeof/in_be32/out_be32 operations from the reader. o removed irrelevant comments, added others to resemble removed BD_ defines o const'd and uncasted all get_property() assignments bugfixes, courtesy of Scott Wood, include: - Read phy_address as a u32, not u8. - Match on type == "network" as well as compatible == "ucc_geth", as device_is_compatible() will only compare up to the length of the test string, allowing "ucc_geth_phy" to match as well. - fixes the MAC setting code in ucc_geth.c. The old code was overwriting and dereferencing random stack contents. Signed-off-by: Li Yang <leoli@freescale.com> Signed-off-by: Kim Phillips <kim.phillips@freescale.com> Signed-off-by: Scott Wood <scottwood@freescale.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-10-21[PATCH] sky2: 88E803X transmit lockupStephen Hemminger
The reason sky2 driver was locking up on transmit on the Yukon-FE chipset is that it was misconfiguring the internal RAM buffer so the transmitter and receiver were sharing the same space. The code assumed there was 16K of RAM on Yukon-FE (taken from vendor driver sk98lin which is even more f*cked up on this). Then it assigned based on that. The giveaway was that the registers would only hold 9bits so both RX/TX had 0..1ff for space. It is a wonder it worked at all! This patch addresses this, and fixes an easily reproducible hang on Transmit. Only the Yukon-FE chip is Marvell 88E803X (10/100 only) are affected. Signed-off-by: Stephen Hemminger <shemminger@osdl.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-10-21[PATCH] e1000: Reset all functions after a PCI errorLinas Vepstas
During the handling of the PCI error recovery sequence, the current e1000 driver erroneously blocks a device reset for any but the first PCI function. It shouldn't -- this is a cut-n-paste error from a different driver (which tolerated only one hardware reset per hardware card). Signed-off-by: Linas Vepstas <linas@austin.ibm.com> Cc: Jesse Brandeburg <jesse.brandeburg@intel.com> Acked-by: Auke Kok <auke-jan.h.kok@intel.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-10-21[PATCH] WAN/pc300: handle, propagate minor errorsJeff Garzik
- move definition of 'tmc' and 'br' locals closer to usage - handle clock_rate_calc() error - propagate errors back to upper level open routine Signed-off-by: Jeff Garzik <jeff@garzik.org> Cc: Krzysztof Halasa <khc@pm.waw.pl> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-10-21[PATCH] Update smc91x driver with ARM Versatile board infoDeepak Saxena
We need to specify a Versatile-specific SMC_IRQ_FLAGS value or the new generic IRQ layer will complain thusly: No IRQF_TRIGGER set_type function for IRQ 25 (<NULL>) Signed-off-by: Deepak Saxena <dsaxena@plexity.net> Cc: Jeff Garzik <jeff@garzik.org> Cc: Russell King <rmk@arm.linux.org.uk> Cc: Nicolas Pitre <nico@cam.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-10-20Revert "[mv643xx] Add pci device table for auto module loading."Linus Torvalds
This reverts commit 4596c75c23dde2623cbeec69357d5eb13d28387e as requested by Olaf Hering. It causes compile errors, and says Olaf: "This change is also wrong, the autoloading works perfect with 2.6.18, no need to add random PCI ids. See commit a0245f7ad5214cb00131d7cd176446e067c913dc, platform devices have now a modalias entry in sysfs. The network card is not a PCI device." Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-20Merge master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6Linus Torvalds
* master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6: (36 commits) [Bluetooth] Fix HID disconnect NULL pointer dereference [Bluetooth] Add missing entry for Nokia DTL-4 PCMCIA card [Bluetooth] Add support for newer ANYCOM USB dongles [NET]: Can use __get_cpu_var() instead of per_cpu() in loopback driver. [IPV4] inet_peer: Group together avl_left, avl_right, v4daddr to speedup lookups on some CPUS [TCP]: One NET_INC_STATS() could be NET_INC_STATS_BH in tcp_v4_err() [NETFILTER]: Missing check for CAP_NET_ADMIN in iptables compat layer [NETPOLL]: initialize skb for UDP [IPV6]: Fix route.c warnings when multiple tables are disabled. [TG3]: Bump driver version and release date. [TG3]: Add lower bound checks for tx ring size. [TG3]: Fix set ring params tx ring size implementation [NET]: reduce per cpu ram used for loopback stats [IPv6] route: Fix prohibit and blackhole routing decision [DECNET]: Fix input routing bug [TCP]: Bound TSO defer time [IPv4] fib: Remove unused fib_config members [IPV6]: Always copy rt->u.dst.error when copying a rt6_info. [IPV6]: Make IPV6_SUBTREES depend on IPV6_MULTIPLE_TABLES. [IPV6]: Clean up BACKTRACK(). ...
2006-10-20[PATCH] e100: fix reboot -f with netconsole enabledAuke Kok
When rebooting with netconsole over e100, the driver shutdown code would deadlock with netpoll. Reduce shutdown code to a bare minimum while retaining WoL and suspend functionality. Signed-off-by: Auke Kok <auke-jan.h.kok@intel.com> Cc: Jeff Garzik <jeff@garzik.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-20[NET]: Can use __get_cpu_var() instead of per_cpu() in loopback driver.Eric Dumazet
As BHs are off in loopback_xmit(), preemption cannot occurs, so we can use __get_cpu_var() instead of per_cpu() (and avoid a preempt_enable()/preempt_disable() pair) Signed-off-by: Eric Dumazet <dada1@cosmosbay.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-10-18[TG3]: Bump driver version and release date.David S. Miller
Signed-off-by: David S. Miller <davem@davemloft.net>
2006-10-18[TG3]: Add lower bound checks for tx ring size.Michael Chan
The minimum tx ring size must be greater than MAX_SKB_FRAGS or 3 times that on some chips with TSO bugs. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-10-18[TG3]: Fix set ring params tx ring size implementationRanjit Manomohan
Fixes the implementation of the ethtool set ring parameters for the tg3 transmit ring. The size of tx_pending is taken into account before doing a netif_wake_queue. This prevents the interface from locking up when smaller transmit ring sizes are used. Signed-off-by: Ranjit Manomohan <ranjitm@google.com> Acked-by: Michael Chan <mchan@broadcom.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-10-18[NET]: reduce per cpu ram used for loopback statsEric Dumazet
We dont need a full struct net_device_stats (currently 23 long : 184 bytes on x86_64) per possible CPU, but only two counters : bytes and packets We save few CPU cycles too in loopback_xmit() not updating 4 fields, but 2. Signed-off-by: Eric Dumazet <dada1@cosmosbay.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-10-18Merge branch 'ubuntu-updates' of ↵Linus Torvalds
master.kernel.org:/pub/scm/linux/kernel/git/bcollins/ubuntu-2.6 * 'ubuntu-updates' of master.kernel.org:/pub/scm/linux/kernel/git/bcollins/ubuntu-2.6: [pci_ids] Add Quicknet XJ vendor/device ID's. [valkyriefb] Ifdef for when CONFIG_NVRAM isn't enabled. [platinumfb] Ifdef for when CONFIG_NVRAM isn't enabled. [igafb] Add pci dev table for module auto loading. [controlfb] Ifdef for when CONFIG_NVRAM isn't enabled. [hid-core] TurboX Keyboard needs NOGET quirk. [ixj] Add pci dev table for module auto loading. [initio] Add pci dev table for module auto loading. [fdomain] Add pci dev table for module auto loading. [BusLogic] Add pci dev table for auto module loading. [mv643xx] Add pci device table for auto module loading. [alim7101] Add pci dev table for auto module loading.
2006-10-18[mv643xx] Add pci device table for auto module loading.Ben Collins
Signed-off-by: Ben Collins <bcollins@ubuntu.com>
2006-10-17[SPARC]: Fix some section mismatch warnings in sparc drivers.Ben Collins
Signed-off-by: Ben Collins <ben.collins@ubuntu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-10-17[PATCH] zd1211rw: fix build-break caused by association race fixJohn W. Linville
The break was caused by 7c28ad2d83ecc637237fe684659a6afbce0bb2a8. Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-10-17sky2: GMAC pause frameStephen Hemminger
This reverts earlier change that attempted to fix flow control. Device needs to discard pause frames, otherwise it hangs after a while. Signed-off-by: Stephen Hemminger <shemminger@osdl.org>
2006-10-17sky2: accept multicast pause framesStephen Hemminger
When using flow control, the PHY needs to accept multicast pause frames. Without this fix, these frames were getting discarded by the PHY before doing any flow control. Signed-off-by: Stephen Hemminger <shemminger@osdl.org>
2006-10-17sky2: version 1.9Stephen Hemminger
Mark version, this has been a lot of patches. Signed-off-by: Stephen Hemminger <shemminger@osdl.org>
2006-10-17sky2: no message on rx fifo overflowStephen Hemminger
Under high load it is possible to make the receiver FIFO get overloaded. The driver/hardware recover properly, so there is no reason to fill the log with lots of extra messages, just update counter. Signed-off-by: Stephen Hemminger <shemminger@osdl.org>
2006-10-17sky2: flow control setting fixesStephen Hemminger
The result of flow control negotiation should not limit the next negotiatition. If board is plugged into an old half duplex 10Mbit port, without pause, then replugged into a gigabit port, it should negotiate what is desired, not inherit that last negotiation. Signed-off-by: Stephen Hemminger <shemminger@osdl.org>
2006-10-17sky2: don't reset PHY twiceStephen Hemminger
Don't need to reset PHY twice on startup. Signed-off-by: Stephen Hemminger <shemminger@osdl.org>
2006-10-17sky2: use duplex result bitsStephen Hemminger
The result of duplex negotiation is avaliable in the phy status register, so use that to simplify code and avoid rereading the PHY. Signed-off-by: Stephen Hemminger <shemminger@osdl.org>
2006-10-17sky2: advertising register 16 bitsStephen Hemminger
The advertising bits (from ethtool.h) fit in 16 bits.
2006-10-17sky2: fiber pause bitsStephen Hemminger
The advertisement bits for flow control are located in different location on fiber (1000baseX) Signed-off-by: Stephen Hemminger <shemminger@osdl.org>
2006-10-17sky2: phy irq on shutdownStephen Hemminger
When PHY is turned off on shutdown, it causes the IRQ to get stuck on. Make sure and disable the IRQ first, and if IRQ occurs when device is not running, don't access PHY because that will hang. Signed-off-by: Stephen Hemminger <shemminger@osdl.org>
2006-10-17sky2: turn of workaround timerStephen Hemminger
The workaround timer is not needed in most systems with proper IRQ routing and by perodically waking up it adds to laptop power consumption. Signed-off-by: Stephen Hemminger <shemminger@osdl.org>
2006-10-17sky2: MSI test is only a warningStephen Hemminger
Some motherboards don't implement MSI correctly. The driver handles this but the warning is too verbose and overly cautious. Signed-off-by: Stephen Hemminger <shemminger@osdl.org>
2006-10-16[PATCH] airo: check if need to freezeDave Kleikamp
The airo driver used to break out of while loop if there were any signals pending. Since it no longer checks for signals, it at least needs to check if it needs to be frozen. Signed-off-by: Dave Kleikamp <shaggy@austin.ibm.com> Cc: Jean Tourrilhes <jt@hpl.hp.com> Cc: Sukadev Bhattiprolu <sukadev@us.ibm.com> Cc: Jeff Garzik <jeff@garzik.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-10-16[PATCH] wireless: More WE-21 potential overflows...Jean Tourrilhes
After the Orinoco issue, I did an audit of other drivers for the same issue. Three drivers were NULL terminating the ESSID, which could cause an overflow in WE-21 when the ESSID has maximum size. Signed-off-by: Jean Tourrilhes <jt@hpl.hp.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-10-16[PATCH] zd1201: Possible NULL dereferenceEric Sesterhenn
If we enter the if(!zd) and set free to 1, we dereference zd in the exit code. Signed-off-by: Eric Sesterhenn <snakebyte@gmx.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-10-16[PATCH] orinoco: fix WE-21 buffer overflowJean Tourrilhes
This patch fixes the Orinoco driver overflow issue with WE-21. Cc: Valdis Kletnieks <Valdis.Kletnieks@vt.edu> Cc: Pavel Roskin <proski@gnu.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-10-16[PATCH] airo.c: check returned valuesFlorin Malita
create_proc_entry() can fail and return NULL in setup_proc_entry(), the result must be checked before dereferencing. (Coverity ID 1443) init_wifidev() & setup_proc_entry() can also fail in _init_airo_card(). This adds the checks & cleanup code and removes some whitespace. Signed-off-by: Florin Malita <fmalita@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-10-16[PATCH] bcm43xx-softmac: Fix system hang for x86-64 with >1GB RAMLarry Finger
The bcm43xx-softmac software currently fails when running on x86_64 systems with more than 1GB RAM and one of the card variants with 30-bit DMA addressing. This patch uses the address extension bits in the hardware to set the correct DMA mask for the specific card in use. Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-10-16[PATCH] bcm43xx-softmac: check returned value from pci_enable_deviceLarry Finger
Linus's tree now has a configuration option that prints a warning whenever the returned value of any routine is ignored. This patch fixes the only such warning for bcm43xx. Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-10-16[PATCH] softmac: Fix WX and association related racesMichael Buesch
This fixes some race conditions in the WirelessExtension handling and association handling code. Signed-off-by: Michael Buesch <mb@bu3sch.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-10-16[PATCH] bcm43xx: fix race condition in periodic work handlerMichael Buesch
There is a potential race condition in the periodic_work_handler routine of bcm43xx-softmac. In addition to fixing this condition, the size of code is reduced by moving the mutex lock outside the if. Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-10-12r8169: fix infinite loop during hotplugArnaud Patard
Bug reported for PCMCIA. Signed-off-by: Arnaud Patard <apatard@mandriva.com> Signed-off-by: Francois Romieu <romieu@fr.zoreil.com>
2006-10-11Merge branch 'upstream-linus' of ↵Linus Torvalds
master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/netdev-2.6 * 'upstream-linus' of master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/netdev-2.6: (42 commits) [PATCH] Fix section mismatch in de2104x.c [PATCH] sky2: set lower pause threshold to prevent overrun [PATCH] sky2: revert pci express extensions [PATCH] skge: version 1.9 [PATCH] skge: better flow control negotiation [PATCH] skge: pause mapping for fiber [PATCH] skge: fix stuck irq when fiber down [PATCH] powerpc/cell spidernet release all descrs [PATCH] powerpc/cell spidernet DMA direction fix [PATCH] powerpc/cell spidernet variable name change [PATCH] powerpc/cell spidernet reduce DMA kicking [PATCH] powerpc/cell spidernet [PATCH] powerpc/cell spidernet refine locking [PATCH] powerpc/cell spidernet NAPI polling info. [PATCH] powerpc/cell spidernet low watermark patch. [PATCH] powerpc/cell spidernet incorrect offset [PATCH] powerpc/cell spidernet stop error printing patch. [PATCH] powerpc/cell spidernet fix error interrupt print [PATCH] powerpc/cell spidernet bogus rx interrupt bit [PATCH] Spidernet stop queue when queue is full. ...
2006-10-11[PATCH] sun3 __iomem annotationsAl Viro
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-11[PATCH] Use linux/io.h instead of asm/io.hMatthew Wilcox
In preparation for moving check_signature, change these users from asm/io.h to linux/io.h Signed-off-by: Matthew Wilcox <willy@parisc-linux.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-14 23:21:34 +0000