aboutsummaryrefslogtreecommitdiff
path: root/drivers/net
AgeCommit message (Collapse)Author
2009-03-05ath9k: fix AR_TXCFG_DMASZ_MASK valueGabor Juhos
The current bitmask is invalid, because the tx dma size is a 3 bit wide value. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-03-05ath9k: Remove unused variables in struct ath_beacon_configSujith
We don't store the beacon timestamp internally, nor do we do any TIM handling in ath9k. Signed-off-by: Sujith <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-03-05ath9k: Lock config_interface() callback with a mutexSujith
Signed-off-by: Sujith <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-03-05ath9k: Handle TSF properly for AP modeSujith
The TSF has to be reset only once, upon bringing the interface up in AP mode. For any beacon reconfigure calls after that, resetting the TSF results in incorrect beacon generation. The only exception is a change in the beacon interval, which is indicated to the driver by mac80211 through IEEE80211_CONF_CHANGE_BEACON_INTERVAL, handle this properly. Signed-off-by: Sujith <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-03-05ath9k: Split beacon configuration into mode specific routinesSujith
This makes the code easier to understand. Signed-off-by: Sujith <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-03-05ath9k: Cleanup beacon stuck processingSujith
We never use SC_OP_NO_RESET, it is not configurable at all. Remove all code that deals with this flag and make beacon stuck processing simple. Signed-off-by: Sujith <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-03-05ath9k: Scrub beacon.cSujith
Remove useless comments, fix indentation. Also, remove all occurrences of ASSERT(vif) which are not needed. Signed-off-by: Sujith <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-03-05ath9k: Use new scan notifiers from mac80211Sujith
The only use case for this right now is ANI calibration, but more might come up in the future. Signed-off-by: Sujith <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-03-05ath5k: Set TSF fixAlina Friedrichsen
The old code doesn't work correctly e.g. on newer chipsets like AR5418+AR2122 and AR5416+AR2133. Signed-off-by: Alina Friedrichsen <x-alina@gmx.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-03-05ath9k: Set TSF fixAlina Friedrichsen
The old code doesn't work correctly e.g. on newer chipsets like AR5418+AR2122 and AR5416+AR2133. Signed-off-by: Alina Friedrichsen <x-alina@gmx.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-03-05b43: Pass more RX flags to mac80211Michael Buesch
This changes the RX handler to pass more status flags to mac80211. It also changes part of the drop policy, if bad frames were requested. (Note that currently mac80211 will throw a WARN_ON in that case. But nothing bad will happen). This also removes some obsolete unused timestamping code. Signed-off-by: Michael Buesch <mb@bu3sch.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-03-05ath9k: Fix FIF_BCN_PRBRESP_PROMISC handlingAlina Friedrichsen
So that a new created IBSS network doesn't break on the first scan. It seems to Sujith and me that this stupid code unnecessary, too. So remove it... Signed-off-by: Alina Friedrichsen <x-alina@gmx.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-03-05ath9k: Handle power modes in isr for power save.Vivek Natarajan
Restore network sleep mode in isr if power save is enabled. Signed-off-by: Vivek Natarajan <vnatarajan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-03-05ath9k: Fill in rate_update mac80211 callbackSujith
This callback can be used to handle dynamic 20/40, and changes in the operating channel's HT parameters. Signed-off-by: Sujith <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-03-05ath9k: Remove unused key xoringJouni Malinen
This is not used anywhere in ath9k and is just making the code more confusing. Signed-off-by: Jouni Malinen <jouni.malinen@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-03-05ath9k: Document keycache operationsJouni Malinen
There are number of small details about the keycache operations that are very easy to miss (and forget), so better include detailed comments in ath9k_hw_set_keycache_entry() to avoid having to figure out this every time when having to touch this area. Signed-off-by: Jouni Malinen <jouni.malinen@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-03-05iwlwifi: reduce stack sizeFrank Seidel
Reduce stack memory footprint of iwlwifi. (From >1000 bytes for each *_table_read on i386 down to 32) Signed-off-by: Frank Seidel <frank@f-seidel.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-03-05rt2x00: Fix SW antenna diversityIvo van Doorn
Software antenna tuning is broken because of an function ordering problem during rt2x00link_tuner(). rt2x00link_precalculate_signal() rt2x00leds_led_quality() rt2x00lib_antenna_diversity() rt2x00link_precalculate_signal() will reset the quality TX/RX counters, however rt2x00lib_antenna_diversity() requires the RX counter to see what RSSI value must be used for a particular antenna. We can't change the ordering since rt2x00lib_antenna_diversity() might reset other statistics which are needed by the function called earlier. Move the reset of the quality TX/RX counters into a seperate function and move the call to after rt2x00lib_antenna_diversity(). Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-03-05iwl3945 : use iwl_activate_qosAbhijeet Kolekar
3945 can use iwl_activate_qos instead of iwl3945_activate_qos. Patch does two things 1) Patch adds iwl_activate_qos in core library. 2) 3945 makes use of iwl_activate_qos. Signed-off-by: Abhijeet Kolekar <abhijeet.kolekar@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-03-05iwl3945: add iwl3945_setup_macAbhijeet Kolekar
Patch does following, 1) mac80211's shared data is now initialized in iwl3945_setup_mac. 2) Set the rfkill to right state after initialization Signed-off-by: Abhijeet Kolekar <abhijeet.kolekar@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-03-05iwlwifi: fix *pci_probe error flowReinette Chatre
for iwlagn: - Have to free eeprom of version check fails - otherwise we end up with memory leak. - Include removal of workqueue (created in _setup_deferred_work) in error handling. for iwl3945: - Fix a few places to jump to correct error handling. - Reorganize error handling to match with code flow. - Include iwl_free_channel_map as part of error handling. - Include releasing eeprom as part of error handling. Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-03-05iwl3945: unify set key flow with iwlwifiAbhijeet Kolekar
unify the set key flow with iwlwifi. Signed-off-by: Abhijeet Kolekar <abhijeet.kolekar@intel.com> Acked-by: Samuel Ortiz <samuel.ortiz@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-03-05iwl3945: synchronize timestamp with uCodeAbhijeet Kolekar
In IBSS, TSF maintains local clock counters at each station. Network Synchronization follows a completely distributed scheme where beacon frames are generated. Each station maintain its own TSF timestamp, extracted from beacon timestamps they recieved. Following patch synchronize this beacon timestamp with uCode. Signed-off-by: Abhijeet Kolekar <abhijeet.kolekar@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-03-05iwlwifi: update 5150 API version to support new firmwareJay Sternberg
update API to support new numbering that is used for other newer devices. 5150 ucode has not been released yet, so the first released API will be v2. For those who do have a v1 API the driver does have backward compatibility support new value of REPLY_TX_POWER_DBM_CMD Signed-off-by: Jay Sternberg <jay.e.sternberg@linux.intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-03-05ath5k: fix hw rate index conditionJiri Slaby
Make sure we print out a warning when the index is out of bounds, i.e. even on hw_rix == AR5K_MAX_RATES. Also change to WARN and print text with the reported hw_rix. Signed-off-by: Jiri Slaby <jirislaby@gmail.com> Cc: Nick Kossifidis <mickflemm@gmail.com> Cc: Luis R. Rodriguez <lrodriguez@atheros.com> Cc: Bob Copeland <me@bobcopeland.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-03-05ath9k: Fix hw crypto configuration for TKIP in AP modeJouni Malinen
Incorrect Michael MIC key (RX, should have been TX) was set for the group key in AP mode. This resulted in all broadcast frames triggering Michael MIC errors and eventual TKIP countermeasures. The change here sets the correct Michael MIC key based on whether the local end is the authenticator (well, AP for now). Signed-off-by: Jouni Malinen <jouni.malinen@atheros.com> Tested-by: Pat Erley <pat-lkml@erley.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-03-05airo: reduce stack memory footprintFrank Seidel
Applying kernel janitors todos (reduce stack footprint where possible) to airo wireless driver. (Before 1124 bytes on i386, now 876) Signed-off-by: Frank Seidel <frank@f-seidel.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-03-05wireless, wavelan: spin off by 1Roel Kluin
spin can reach -1 after the loop, so 0 is still success. Signed-off-by: Roel Kluin <roel.kluin@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-03-05ath9k: Remove ununsed ack duration stuff with long/short preambleVasanthakumar Thiagarajan
Signed-off-by: Vasanthakumar Thiagarajan <vasanth@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-03-05ath9k: Configure Power control register appropriately for h/w with 4k eepromVasanthakumar Thiagarajan
Signed-off-by: Vasanthakumar Thiagarajan <vasanth@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-03-05zd1211rw: Implement get_tsf()Alina Friedrichsen
This patch implements get_tsf() of ieee80211_ops in the zd1211rw driver. Signed-off-by: Alina Friedrichsen <x-alina@gmx.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-03-05ath9k: Add module parameter to disable hardware cryptoJouni Malinen
nohwcrypt=1 module parameter can now be used to disable hardware crypto in ath9k. While the hardware acceleration handles most cases, it may be useful to be able to force mac80211 software implementation to be used for some tests, e.g., with virtual interface combinations that may not yet be supported in the key cache configuration. In addition, this allows management frame protection to be tested with older hardware revisions. Signed-off-by: Jouni Malinen <jouni.malinen@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-03-05Merge branch 'master' of ↵David S. Miller
master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6 Conflicts: drivers/net/tokenring/tmspci.c drivers/net/ucc_geth_mii.c
2009-03-05bonding: Fix device passed into ->ndo_neigh_setup().Patrick McHardy
Signed-off-by: Patrick McHardy <kaber@trash.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-03-04Merge branch 'master' of /home/davem/src/GIT/linux-2.6/David S. Miller
2009-03-04tmspci: fix request_irq raceMeelis Roos
Currently, tmspci tokenring driver crashes on device initialization because it requests its irq before initializing corresponding data structures. Fix this by moving request_irq call to a safer place. Signed-off-by: Meelis Roos <mroos@linux.ee> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-03-04sfc: Improve NIC internal error recoveryBen Hutchings
Make the error count a per-NIC variable. Reset this the count after an hour if it has not reached the critical value. Set the critical value back to 5. Signed-off-by: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-03-04sfc: Fix search for flush completion eventsBen Hutchings
When flushing queues we disable normal interrupt and event handling and poll event queue 0 looking for flush completions. Unfortunately the flush event polling loop fails to move past any other type of event. This problem has not been observed in production hardware but appears to be a possibility. Signed-off-by: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-03-04sfc: Don't wake TX queues while they're being flushedBen Hutchings
Signed-off-by: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-03-04sfc: Clear I2C adapter structure in falcon_remove_nic()Ben Hutchings
i2c_del_adapter() leaves dangling pointers in the structure. If we retry the NIC probe and pass the structure to i2c_add_adapter() again it will lead to an oops unless we clear it first. Signed-off-by: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-03-04sfc: Clean up properly on reset failure pathsBen Hutchings
If MAC switching fails, stop the port properly. If PHY reinitialisation fails, clear the port_initialized flag. Signed-off-by: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-03-04sfc: Reject packets from the kernel TX queue during a loopback self-testBen Hutchings
Signed-off-by: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-03-04sfc: Fix efx_ethtool_nway_result() to use clause 45 MDIO registersBen Hutchings
Signed-off-by: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-03-04tg3: Fix 5906 link problemsMatt Carlson
Commit 6833c043f9fc03696fde623914c4a0277df2a0bc introduced the phy auto-powerdown capability. While the APD feature only works for 5761 and 5784 asic revisions, the (harmless portion of the) code was applied to all 5705 and newer devices. However, the 5906 phy departs from the usual design. This commit was interfering with the 5906's ability to negotiate link against some switches. This patch corrects the problem. Signed-off-by: Matt Carlson <mcarlson@broadcom.com> Signed-off-by: Benjamin Li <benli@broadcom.com> Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-03-04sungem: another error printed one too earlyRoel Kluin
Another error was printed one too early. Signed-off-by: Roel Kluin <roel.kluin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-03-04net pcmcia: worklimit reaches -1Roel Kluin
with while (--worklimit >= 0); worklimit reaches -1 after the loop. In 3c589_cs.c this caused a warning not to be printed. In 3c574_cs.c contrastingly, el3_rx() treats worklimit differently: static int el3_rx(struct net_device *dev, int worklimit) { while (--worklimit >= 0) { ... } return worklimit; } el3_rx() is only called by function el3_interrupt(): twice: static irqreturn_t el3_interrupt(int irq, void *dev_id) { int work_budget = max_interrupt_work; while(...) { if (...) work_budget = el3_rx(dev, work_budget); if (...) work_budget = el3_rx(dev, work_budget); if (--work_budget < 0) { ... break; } } } The error path can occur 2 too early. Signed-off-by: Roel Kluin <roel.kluin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-03-04net: more timeouts that reach -1Roel Kluin
with while (timeout-- > 0); timeout reaches -1 after the loop, so the tests below are off by one. also don't do an '< 0' test on an unsigned. Signed-off-by: Roel Kluin <roel.kluin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-03-03qlge: Add support for lost firmware events.Ron Mercer
When the firmware is issuing events to the driver the events must be removed from the queue. If the queue overflows, the firmware will build and special event that captures those that are lost. Signed-off-by: Ron Mercer <ron.mercer@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-03-03qlge: Save status from firmware crash (system err).Ron Mercer
Signed-off-by: Ron Mercer <ron.mercer@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-03-03qlge: Improve handling for firmware init failure.Ron Mercer
This event will arrive at boot time or after an MPI processor reset if the firmware failed to initialize. Signed-off-by: Ron Mercer <ron.mercer@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-14 10:51:20 +0000