aboutsummaryrefslogtreecommitdiff
path: root/drivers/net
AgeCommit message (Collapse)Author
2006-09-13drivers/net: const-ify ethtool_ops declarationsJeff Garzik
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-09-13[PATCH] sky2: big endianStephen Hemminger
Fix support for big endian platforms like PPC. Still not sure about VLAN acceleration (does it need swapping)? Signed-off-by: Stephen Hemminger <shemminger@osdl.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-09-13[PATCH] sky2: fiber supportStephen Hemminger
Fix the support for fiber connected gigabit boards. Allow half duplex gigabit to be configured. Signed-off-by: Stephen Hemminger <shemminger@osdl.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-09-13[PATCH] sky2: tx pause bug fixStephen Hemminger
Fix problems with transmit pause frames. The driver was telling the GMAC to flush (not process) pause frames. Manually disabling pause wasn't working because of problems in the setup. This maybe the cause of the lockup under load. http://bugzilla.kernel.org/show_bug.cgi?id=6839 Patch against netdev-2.6 git tree Signed-off-by: Stephen Hemminger <shemminger@osdl.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-09-13drivers/net: Trim trailing whitespaceJeff Garzik
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-09-13[PATCH] ehea: IBM eHEA Ethernet Device DriverJan-Bernd Themann
Hi Jeff, I fixed the __iomem issue and tested the driver with sparse. Looks good so far. Thanks for your effort. Jan-Bernd Themann Signed-off-by: Jan-Bernd Themann <themann@de.ibm.com> drivers/net/Kconfig | 9 drivers/net/Makefile | 1 drivers/net/ehea/Makefile | 6 drivers/net/ehea/ehea.h | 447 ++++++ drivers/net/ehea/ehea_ethtool.c | 294 ++++ drivers/net/ehea/ehea_hcall.h | 51 drivers/net/ehea/ehea_hw.h | 287 ++++ drivers/net/ehea/ehea_main.c | 2654 ++++++++++++++++++++++++++++++++++++++++ drivers/net/ehea/ehea_phyp.c | 705 ++++++++++ drivers/net/ehea/ehea_phyp.h | 455 ++++++ drivers/net/ehea/ehea_qmr.c | 582 ++++++++ drivers/net/ehea/ehea_qmr.h | 358 +++++ 12 files changed, 5849 insertions(+) Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-09-13[PATCH] pcnet32: NAPI implementationDon Fry
Implement NAPI changes to pcnet32 driver. Compile default is off. Listed as experimental. Len and Don both worked on a NAPI implementation and have both tested these changes. An e1000 blasting short packets to the pcnet32 will lockup Don's system until the receive storm stops. Without NAPI Len's system watchdog would expire causing the system to reboot. With NAPI the system will stay operational. Tested ia32 and ppc64. Tested '970A, '971, '972, '973, '975, '976, and '978. The Kconfig changes came from Len. Don is to blame for all the others. Signed-off-by: Len Sorensen <lsorense@csclub.uwaterloo.ca> Signed-off-by: Don Fry <brazilnut@us.ibm.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-09-13[PATCH] pcnet32: break receive routine into two pieces.Don Fry
Breaking the receive frame processing into two routines for greater clarity. Tested ia32 and ppc64. Signed-off-by: Don Fry <brazilnut@us.ibm.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-09-13[PATCH] pcnet32: move/create receive and transmit routinesDon Fry
Move the receive routine and create the transmit routine. Tested ia32 and ppc64. Signed-off-by: Don Fry <brazilnut@us.ibm.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-09-13[PATCH] pcnet32: magic number cleanupDon Fry
Change some magic numbers to clearer names. A few whitespace changes. Tested ia32 and ppc64. Signed-off-by: Don Fry <brazilnut@us.ibm.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-09-13[PATCH] pcnet32: remove unnecessary save/restore register accesses.Don Fry
Delete unnecessary save/restore of rap in interrupt handler and statistics. tested ia32 and ppc64. Signed-off-by: Don Fry <brazilnut@us.ibm.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-09-13Merge branch 'upstream-fixes' into upstreamJeff Garzik
2006-09-13[PATCH] mv643xx_eth: Unmap DMA buffers in receive pathDale Farnsworth
Fix a missing call to dma_unmap_single() in the receive path. Without this call, errors have been observed on non-cache-coherent systems. Signed-off-by Dale Farnsworth <dale@farnsworth.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-09-12[PATCH] e1000: revert 'e1000: Remove 0x1000 as supported device'Auke-Jan H Kok
The commit 'e1000: Remove 0x1000 as supported device' (Jeff Kirsher, 673a052fde79ab5e9dce569b0336358812ddba2d) Removes PIC device ID 8086:1000 from the list of supported devices. A fix was submitted for the original issue (commit 6a9516989f94df10d9a27ba543c6b53b3e69c84a). This commit reverts commit 673a052fde79ab5e9dce569b0336358812ddba2d and re-enables 82542rev3 chips completely. Signed-off-by: Auke Kok <auke-jan.h.kok@intel.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-09-12Merge tag 'r8169-20060912-00' of ↵Jeff Garzik
git://electric-eye.fr.zoreil.com/home/romieu/linux-2.6 into tmp
2006-09-12Merge tag '8139cp-20060912-00' of ↵Jeff Garzik
git://electric-eye.fr.zoreil.com/home/romieu/linux-2.6 into tmp
2006-09-128139cp: ring_info removal for the transmit pathFrancois Romieu
As long as the descriptor fits on a single cacheline, the change should be almost free. Now ring_info is not used at all. Remove it. Signed-off-by: Francois Romieu <romieu@fr.zoreil.com>
2006-09-12Merge branch 'upstream-fixes' into upstreamJeff Garzik
2006-09-12[PATCH] e1000: fix TX timout hang regression for 82542rev3Auke Kok
Commit 581d708eb47cccb5f41bc0817e50c9b004011ba8 (oct. 5 2005) introduced partial Multiqueue support for e1000 which broke macro smartness in setting up head/tail registers for 82542 rev3 chipsets, making these adapters completely non-working since 2.6.15. This commit sets the proper head and tail registers for read and write descriptor rings. Ths fix was tested on an 82542 rev3 NIC and newer NICs. Signed-off-by: Auke Kok <auke-jan.h.kok@intel.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-09-12Merge branch 'tmp' into upstreamJeff Garzik
2006-09-12[PATCH] Remove more unnecessary driver printk'sAndy Gospodarek
As I promised last week, here is the first pass at removing all unnecessary printk's that exist in network device drivers currently in promiscuous mode. The duplicate messages are not needed so they have been removed. Some of these drivers are quite old and might not need an update, but I did them all anyway. I am currently auditing the remaining conditional printk's and will send out a patch for those soon. Signed-off-by: Andy Gospodarek <andy@greyhouse.net> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-09-12Merge branch 'upstream' of ↵Jeff Garzik
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-2.6 into upstream
2006-09-12Merge branch 'upstream-fixes' into upstreamJeff Garzik
2006-09-12Merge branch 'upstream-fixes' of ↵Jeff Garzik
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-2.6 into upstream-fixes
2006-09-11[PATCH] hostap_cs: added support for Proxim Harmony PCI W-Lan cardChristian Steineck
hostap_cs driver - added support for Proxim Harmony PCI W-Lan Card (uses pd6729 based pcmcia2pci bridge) Signed-off-by: Christian Steineck <memphis@machzwo.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-09-11[PATCH] bcm43xx: remove dead code in bcm43xx_sysfs.cLarry Finger
Coverity CID 1160 & 1161 Remove some dead code from bcm43xx_sysfs.c in 2.6.18-rc6 Signed-off-by: Darren Jenkins <darrenrjenkins@gmail.com> Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-09-11[PATCH] bcm43xx: ucode debug status via sysfsLarry Finger
This patch prints out the ucode debug status to sysfs. So, users can watch the microcode status of their hardware. Signed-off-by: Martin Langer <martin-langer@gmx.de> Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-09-11[PATCH] bcm43xx: Add firmware version printoutLarry Finger
This patch prints microcode revision, patchlevel, date and time to KERN_INFO. Also, version 4.xx microcodes (rev>0x128) will be rejected by the driver, because they still do not work. Signed-off-by: Martin Langer <martin-langer@gmx.de> Acked-by: Michael Buesch <mb@bu3sch.de> Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-09-11[PATCH] bcm43xx: remove dead statistics codeLarry Finger
This patch removes code that was make obsolete when the wireless statistics in bcm43xx-softmac were changed, but was overlooked at that time. The value of bcm->stats.link_quality computed here is never used. Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-09-11[PATCH] Prism54 : add bitrates to scan resultJean Tourrilhes
This patch adds bitrate information to the scan result in the Prism54 driver, like some/most other driver do. Signed-off-by: Jean Tourrilhes <jt@hpl.hp.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-09-11[PATCH] zd1211rw: Removed unneeded packed attributesUlrich Kunitz
Inspired by an e-mail by Stephen Hemminger I decided to remove all unneeded packed attributes from the code where the member variables are already aligned. This avoids horrible code being generated on some architectures. Signed-off-by: Ulrich Kunitz <kune@deine-taler.de> Signed-off-by: Daniel Drake <dsd@gentoo.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-09-11[PATCH] zd1211rw: Add ID for Asus WL-159gDaniel Drake
Tested by Vincent TOUCHARD zd1211 chip 0b05:170c v4802 high 00-11-d8 AL2230_RF pa0 g--- Signed-off-by: Daniel Drake <dsd@gentoo.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-09-11[PATCH] zd1211rw: Add ID for Siemens Gigaset USB Stick 54Daniel Drake
Tested by Martin Dummer. zd1211 chip 0b3b:5630 v4330 high 00-01-e3 RF2959_RF pa0 --- Signed-off-by: Daniel Drake <dsd@gentoo.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-09-11[PATCH] bcm43xx: Correct out of sequence initialization stepLarry Finger
This patch fixes an out of sequence step in the bcm43xx_init_board routine for bcm43xx-softmac. Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-09-11[PATCH] bcm43xx-softmac: Init, shutdown and restart fixesLarry Finger
This fixes various bugs in the init and shutdown code that would lead to lockups and crashes. Signed-Off-By: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-09-11Merge branch 'upstream-fixes' into upstreamJohn W. Linville
2006-09-11[PATCH] zd1211rw: Fix of signal strength and quality measurementUlrich Kunitz
Caused by a documentation issue I mixed up fields of the zd_status structure. This patch fixes it and improves also the average computation, which is now using only measurements of packets sent by the access point. Signed-off-by: Ulrich Kunitz <kune@deine-taler.de> Signed-off-by: Daniel Drake <dsd@gentoo.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-09-11Merge branch 'from-linus' into upstreamJohn W. Linville
2006-09-11r8169: quirk for the 8110sb on arm platformFrancois Romieu
Inverting the write ordering of the TxDescAddr{High/Low} registers suffices to trigger a sabbat of PCI errors which make the device completely dysfunctional. The issue has not been reported on a different platform. Switching from MMIO accesses to I/O ones as done in Realtek's own driver fixes (papers over ?) the bug as well but I am not thrilled to see everyone pay the I/O price for an obscure bug. This is the minimal change to handle the issue. Signed-off-by: Francois Romieu <romieu@fr.zoreil.com> Reported-by: Lennert Buytenhek <buytenh@wantstofly.org>
2006-09-11Merge branch 'upstream-fixes' into upstreamJeff Garzik
2006-09-11[PATCH] Fix dm9000 release_resourceDirk Opfer
dm9000_release_board calls release_resource with the platform resource instead of the requested resource: db->addr_res = platform_get_resource(pdev, IORESOURCE_MEM, 0); db->addr_req = request_mem_region(db->addr_res->start, i, pdev->name); dm9000_release_board: if (db->addr_res != NULL) { release_resource(db->addr_res); kfree(db->addr_req); With this behavior the kernel will crash on the second removal. The attached patch fix this problem. Signed-off-by: Dirk Opfer <Dirk@Opfer-Online.de> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-09-11[PATCH] skge: check for PCI hotplug during IRQStephen Hemminger
Check if IRQ came from hardware fault (hotplug). Signed-off-by: Stephen Hemminger <shemminger@osdl.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-09-11[PATCH] cleanup unnecessary forcedeth printkAndy Gospodarek
This removes unnecessary messages that show up every time I put my ethernet card in promiscuous mode. I'm already getting notification from the networking layer, I don't need notification from the driver as well. There are probably other drivers that do this as well -- I'll look around and see what I can find. Signed-off-by: Andy Gospodarek <andy@greyhouse.net> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-09-11[PATCH] Handle pci_enable_device() errors in resumeValerie Henson
Signed-off-by: Valerie Henson <val_henson@linux.intel.com> Cc: Jeff Garzik <jeff@garzik.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-09-11[PATCH] Use tulip.h in winbond-840.cGrant Grundler
Include "tulip.h" in winbond-840.c and clean up lots of redundant definitions. Signed-off-by: Grant Grundler <grundler@parisc-linux.org> Signed-off-by: Kyle McMartin <kyle@parisc-linux.org> Signed-off-by: Valerie Henson <val_henson@linux.intel.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-09-11[PATCH] Clean up tulip.hGrant Grundler
Update/cleanup some definitions in tulip.h and tulip_core.c. Signed-off-by: Grant Grundler <grundler@parisc-linux.org> Signed-off-by: Kyle McMartin <kyle@parisc-linux.org> Signed-off-by: Valerie Henson <val_henson@linux.intel.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-09-11[PATCH] Defer tulip_select_media() to process contextFrancois Romieu
Move tulip_select_media() processing to a workqueue, instead of delaying in interrupt context, edited by Kyle McMartin to use kevent thread, instead of creating its own workqueue. Signed-off-by: Kyle McMartin <kyle@parisc-linux.org> Signed-off-by: Valerie Henson <val_henson@linux.intel.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-09-11[PATCH] Flush MMIO writes in reset sequenceGrant Grundler
The obvious safe registers to read is one from PCI config space. Signed-off-by: Grant Grundler <grundler@parisc-linux.org> Signed-off-by: Kyle McMartin <kyle@parisc-linux.org> Signed-off-by: Valerie Henson <val_henson@linux.intel.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-09-11[PATCH] Make DS21143 printout match lspci outputThibaut Varene
Signed-off-by: Thibaut Varene <varenet@parisc-linux.org> Signed-off-by: Kyle McMartin <kyle@parisc-linux.org> Signed-off-by: Valerie Henson <val_henson@linux.intel.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-09-11[PATCH] Print physical address in tulip_init_oneGrant Grundler
As the cookie returned by pci_iomap() is fairly useless... [Compile warning on pci_resource_start() format fixed up by Valerie Henson.] Signed-off-by: Grant Grundler <grundler@parisc-linux.org> Signed-off-by: Kyle McMartin <kyle@parisc-linux.org> Signed-off-by: Valerie Henson <val_henson@linux.intel.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-23 08:51:43 +0000