aboutsummaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2009-02-20drm/i915: Don't add panel_fixed_mode to the probed modes list at LVDS init.Steve Aarnio
In the case where no EDID data is read from the device, adding the panel_fixed_mode pointer to the probed modes list causes data corruption. If the panel_fixed_mode pointer is added to the probed modes list at init time, a copy of the mode is added again at drm_get_modes() request time. Then, the panel_fixed_mode pointer is freed because it is seen as a duplicate mode. Unfortunately, this pointer is still stored and used in mode_fixup(). Because the panel_fixed_mode data is copied and returned at drm_get_modes() time, it is unnecessary to add this information at init time. Signed-off-by: Steve Aarnio <steve.j.aarnio@intel.com> Signed-off-by: Eric Anholt <eric@anholt.net> Signed-off-by: Dave Airlie <airlied@linux.ie>
2009-02-20drm: Release user fbs in drm_releaseKristian Høgsberg
Avoids leaking fbs and associated buffers on release. Signed-off-by: Kristian Høgsberg <krh@redhat.com> Tested-by: Tested-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Eric Anholt <eric@anholt.net> Signed-off-by: Dave Airlie <airlied@linux.ie>
2009-02-20drm/i915: Unpin the fb on error during construction.Chris Wilson
If we fail whilst constructing the fb, then we need to unpin it as well. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Eric Anholt <eric@anholt.net> Signed-off-by: Dave Airlie <airlied@linux.ie>
2009-02-20drm/i915: Unpin the hws if we fail to kmap.Chris Wilson
A missing unpin on the error path. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Eric Anholt <eric@anholt.net> Signed-off-by: Dave Airlie <airlied@linux.ie>
2009-02-20drm/i915: Unpin the ringbuffer if we fail to ioremap it.Chris Wilson
A missing unpin on the error path. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Eric Anholt <eric@anholt.net> Signed-off-by: Dave Airlie <airlied@linux.ie>
2009-02-20drm/i915: unpin for an invalid memory domain.Chris Wilson
A missing unreference and unpin after rejecting the relocation for an invalid memory domain. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Eric Anholt <eric@anholt.net> Signed-off-by: Dave Airlie <airlied@linux.ie>
2009-02-20drm/i915: Release and unlock on mmap_gtt error path.Chris Wilson
We failed to unlock the mutex after failing to create the mmap offset. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Eric Anholt <eric@anholt.net> Signed-off-by: Dave Airlie <airlied@linux.ie>
2009-02-20drm/i915: Set framebuffer alignment based upon the fence constraints.Chris Wilson
Set the request alignment to 0, and leave it up to i915_gem_object_pin() to set the appropriate alignment to match the fence covering the object. Eric Anholt mentioned that the pinning code is meant to choose the maximum of the request alignment and that of the fence covering the object... However currently, the pinning code will only apply the fence constraints if the supplied alignment is 0. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Eric Anholt <eric@anholt.net> Signed-off-by: Dave Airlie <airlied@linux.ie>
2009-02-20drm: Do not leak a new reference for flink() on an existing nameChris Wilson
The name table should only hold a single reference, so avoid leaking additional references for secondary calls to flink(). Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Eric Anholt <eric@anholt.net> Signed-off-by: Dave Airlie <airlied@linux.ie>
2009-02-20drm/i915: Fix potential AB-BA deadlock in i915_gem_execbuffer()Roland Dreier
Lockdep warns that i915_gem_execbuffer() can trigger a page fault (which takes mmap_sem) while holding dev->struct_mutex, while drm_vm_open() (which is called with mmap_sem already held) takes dev->struct_mutex. So this is a potential AB-BA deadlock. The way that i915_gem_execbuffer() triggers a page fault is by doing copy_to_user() when returning new buffer offsets back to userspace; however there is no reason to hold the struct_mutex when doing this copy, since what is being copied is the contents of an array private to i915_gem_execbuffer() anyway. So we can fix the potential deadlock (and get rid of the lockdep warning) by simply moving the copy_to_user() outside of where struct_mutex is held. This fixes <http://bugzilla.kernel.org/show_bug.cgi?id=12491>. Reported-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Tested-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: Roland Dreier <rolandd@cisco.com> Signed-off-by: Eric Anholt <eric@anholt.net> Signed-off-by: Dave Airlie <airlied@linux.ie>
2009-02-20drm/i915: refleak along pin() error path.Chris Wilson
A missing unreference if the user calls pin() a second time on a pinned buffer. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Eric Anholt <eric@anholt.net> Signed-off-by: Dave Airlie <airlied@linux.ie>
2009-02-20drm/i915: hold mutex for unreference() in i915_gem_tiling.cChris Wilson
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Eric Anholt <eric@anholt.net> Signed-off-by: Dave Airlie <airlied@linux.ie>
2009-02-20drm/i915: Cleanup trivial leak on execbuffer error path.Chris Wilson
Also spotted by Owain Ainsworth. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Eric Anholt <eric@anholt.net> Signed-off-by: Dave Airlie <airlied@linux.ie>
2009-02-20drm: Free the object ref on error.Chris Wilson
Ensure that the object is unreferenced if we fail to allocate during drm_gem_flink_ioctl(). Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Eric Anholt <eric@anholt.net> Signed-off-by: Dave Airlie <airlied@linux.ie>
2009-02-20drm: Potential use-after-free on error path.Chris Wilson
Remove the member from the hash table before we free the structure! Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Eric Anholt <eric@anholt.net> Signed-off-by: Dave Airlie <airlied@linux.ie>
2009-02-20drm/i915: Storage class should be before const qualifierTobias Klauser
The C99 specification states in section 6.11.5: The placement of a storage-class specifier other than at the beginning of the declaration specifiers in a declaration is an obsolescent feature. Signed-off-by: Tobias Klauser <tklauser@distanz.ch> Signed-off-by: Eric Anholt <eric@anholt.net> Signed-off-by: Dave Airlie <airlied@linux.ie>
2009-02-19Merge master.kernel.org:/home/rmk/linux-2.6-armLinus Torvalds
* master.kernel.org:/home/rmk/linux-2.6-arm: [ARM] 5405/1: ep93xx: remove unused gesbc9312.h header [ARM] 5404/1: Fix condition in arm_elf_read_implies_exec() to set READ_IMPLIES_EXEC [ARM] omap: fix clock reparenting in omap2_clk_set_parent() [ARM] 5403/1: pxa25x_ep_fifo_flush() *ep->reg_udccs always set to 0 [ARM] 5402/1: fix a case of wrap-around in sanity_check_meminfo() [ARM] 5401/1: Orion: fix edge triggered GPIO interrupt support [ARM] 5400/1: Add support for inverted rdy_busy pin for Atmel nand device controller [ARM] 5391/1: AT91: Enable GPIO clocks earlier [ARM] 5390/1: AT91: Watchdog fixes [ARM] 5398/1: Add Wan ZongShun to MAINTAINERS for W90P910 [ARM] omap: fix _omap2_clksel_get_src_field() [ARM] omap: fix omap2_divisor_to_clksel() error return value
2009-02-19[S390] fix "mem=" handling in case of standby memoryHeiko Carstens
Standby memory detected with the sclp interface gets always registered with add_memory calls without considering the limitationt that the "mem=" kernel paramater implies. So fix this and only register standby memory that is below the specified limit. This fixes zfcpdump since it uses "mem=32M". In case there is appr. 2GB standby memory present all of usable memory would be used for the struct pages needed for standby memory. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2009-02-19[S390] sclp: handle empty event buffersPeter Oberparleiter
Handle a malformed hardware response which some versions of the Support Element (SE) may present during SE restart and which otherwise would result in an endless loop in function sclp_dispatch_evbufs. Signed-off-by: Peter Oberparleiter <peter.oberparleiter@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2009-02-19[ARM] 5403/1: pxa25x_ep_fifo_flush() *ep->reg_udccs always set to 0Roel Kluin
*ep->reg_udccs is always set to 0. Signed-off-by: Roel Kluin <roel.kluin@gmail.com> Acked-by: Eric Miao <eric.miao@marvell.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-02-18Merge branch 'for-linus' of git://git.kernel.dk/linux-2.6-blockLinus Torvalds
* 'for-linus' of git://git.kernel.dk/linux-2.6-block: block: fix deadlock in blk_abort_queue() for drivers that readd to timeout list block: fix booting from partitioned md array block: revert part of 18ce3751ccd488c78d3827e9f6bf54e6322676fb cciss: PCI power management reset for kexec paride/pg.c: xs(): &&/|| confusion fs/bio: bio_alloc_bioset: pass right object ptr to mempool_free block: fix bad definition of BIO_RW_SYNC bsg: Fix sense buffer bug in SG_IO
2009-02-18Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/drzeus/mmc * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/drzeus/mmc: omap_hsmmc: Change while(); loops with finite version omap_hsmmc: recover from transfer failures omap_hsmmc: only MMC1 allows HCTL.SDVS != 1.8V omap_hsmmc: card detect irq bugfix sdhci: fix led naming mmc_test: fix basic read test s3cmci: Fix hangup in do_pio_write() Revert "sdhci: force high speed capability on some controllers" MMC: fix bug - SDHC card capacity not correct
2009-02-18spi-gpio: sanitize MISO bitvalueMichael Buesch
gpio_get_value() returns 0 or nonzero, but getmiso() expects 0 or 1. Sanitize the value to a 0/1 boolean. Signed-off-by: Michael Buesch <mb@bu3sch.de> Acked-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-02-18Bernhard has movedBernhard Walle
Since I don't work for SUSE any more and the bwalle@suse.de address is invalid, correct it in the copyright headers and documentation. Signed-off-by: Bernhard Walle <bernhard.walle@gmx.de> Cc: Greg KH <greg@kroah.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-02-18x86: dell-laptop: depends on POWER_SUPPLYRandy Dunlap
Build breaks when DELL_LAPTOP=y and POWER_SUPPLY=m. DELL_LAPTOP needs to depend on POWER_SUPPLY. dell-laptop.c:(.text+0x1ef3c4): undefined reference to `power_supply_is_system_supplied' dell-laptop.c:(.text+0x1ef45e): undefined reference to `power_supply_is_system_supplied' Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Cc: Matthew Garrett <mjg59@srcf.ucam.org> Cc: Ingo Molnar <mingo@elte.hu> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Len Brown <lenb@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-02-18fbdev/drm: fix Kconfig submenu mess in "Graphics support"Krzysztof Helt
Submenus of the graphics support "Support for frame buffer devices" and "Direct Rendering Manager (XFree86 4.1.0 and higher DRI support)" are broken in half after latest changes for Intel 915 mode setting support. The DRM subsection is broken because one option is put outside the choice section it depends on. The frame buffers part is broken then due to circular dependency. Fix this by make Intel frame buffers depend on CONFIG_INTEL_AGP. Kconfigs are broken by d2f59357700487a8b944f4f7777d1e97cf5ea2ed ("drm/i915: select framebuffer support automatically"). This is probably not only way to fix this. Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl> Cc: Ingo Molnar <mingo@elte.hu> Cc: Dave Airlie <airlied@linux.ie> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-02-18floppy: request and release only the ports we actually usePhilippe De Muyter
The floppy driver requests an I/O port it doesn't need, and sometimes this causes a conflict with a motherboard device reported by PNPBIOS. This patch makes the floppy driver request and release only the ports it actually uses. It also factors out the request/release stuff and the io-ports list so they're all in one place now. The current floppy driver uses only these ports: 0x3f2 (FD_DOR) 0x3f4 (FD_STATUS) 0x3f5 (FD_DATA) 0x3f7 (FD_DCR/FD_DIR) but it requests 0x3f2-0x3f5 and 0x3f7, which includes the unused port 0x3f3. Some BIOSes report 0x3f3 as a motherboard resource. The PNP system driver reserves that, which causes a conflict when the floppy driver requests 0x3f2-0x3f5 later. Philippe reported that this conflict broke the floppy driver between 2.6.11 and 2.6.22. His PNPBIOS reports these devices: $ cat 00:07/id 00:07/resources # motherboard device PNP0c02 state = active io 0x80-0x80 io 0x10-0x1f io 0x22-0x3f io 0x44-0x5f io 0x90-0x9f io 0xa2-0xbf io 0x3f0-0x3f1 io 0x3f3-0x3f3 $ cat 00:03/id 00:03/resources # floppy device PNP0700 state = active io 0x3f4-0x3f5 io 0x3f2-0x3f2 Reference: http://lkml.org/lkml/2009/1/31/162 Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com> Signed-off-by: Philippe De Muyter <phdm@macqel.be> Reported-by: Philippe De Muyter <phdm@macqel.be> Tested-by: Philippe De Muyter <phdm@macqel.be> Cc: Adam M Belay <abelay@mit.edu> Cc: Robert Hancock <hancockrwd@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-02-18jsm: additional device supportAdam Lackorzynski
I have a Digi Neo 8 PCI card (114f:00b1) Serial controller: Digi International Digi Neo 8 (rev 05) that works with the jsm driver after using the following patch. Signed-off-by: Adam Lackorzynski <adam@os.inf.tu-dresden.de> Cc: Scott H Kilau <Scott_Kilau@digi.com> Cc: Wendy Xiong <wendyx@us.ibm.com> Acked-by: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-02-18atmel_serial might lose modem status changeAtsushi Nemoto
I found a problem of handling of modem status of atmel_serial driver. With the commit 1ecc26 ("atmel_serial: split the interrupt handler"), handling of modem status signal was splitted into two parts. The atmel_tasklet_func() compares new status with irq_status_prev, but irq_status_prev is not correct if signal status was changed while the port is closed. Here is a sequence to cause problem: 1. Remote side sets CTS (and DSR). 2. Local side close the port. 3. Local side clears RTS and DTR. 4. Remote side clears CTS and DSR. 5. Local side reopen the port. hw_stopped becomes 1. 6. Local side sets RTS and DTR. 7. Remote side sets CTS and DSR. Then CTS change interrupt can be received, but since CTS bit in irq_status_prev and new status is same, uart_handle_cts_change() will not be called (so hw_stopped will not be cleared, i.e. cannot send any data). I suppose irq_status_prev should be initialized at somewhere in open sequence. Itai Levi pointed out that we need to initialize atmel_port->irq_status as well here. His analysis is as follows: > Regarding the second part of the patch (which resets irq_status_prev), > it turns out that both versions of the patch (mine and Atsushi's) > still leave enough room for faulty behavior when opening the port. > > This is because we are not resetting both irq_status_prev and > irq_status in atmel_startup() to CSR, which leads faulty behavior in > the following sequences: > > First case: > 1. closing the port while CTS line = 1 (TX not allowed) > 2. setting CTS line = 0 (TX allowed) > 3. opening the port > 4. transmitting one char > 5. Cannot transmit more chars, although CTS line is 0 > > Second case: > 1. closing the port while CTS line = 0 (TX allowed) > 2. setting CTS line = 1 (TX not allowed) > 3. opening the port > 4. receiving some chars > 5. Now we can transmit, although CTS line is 1 > > This reason for this is that the tasklet is scheduled as a result of > TX or RX interrupts (not a status change!), in steps 4 above. Inside > the tasklet, the atmel_port->irq_status (which holds the value from > the previous session) is compared to atmel_port->irq_status_prev. > Hence, a status-change of the CTS line is faultily detected. > > Both cases were verified on 9260 hardware. [haavard.skinnemoen@atmel.com: folded with patch from Itai Levi] Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp> Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com> Cc: Remy Bohmer <linux@bohmer.net> Cc: Marc Pignat <marc.pignat@hevs.ch> Cc: Itai Levi <itai.levi.devel@gmail.com> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-02-18atmel-mci: fix initialization of dma slave dataDan Williams
The conversion of atmel-mci to dma_request_channel missed the initialization of the channel dma_slave information. The filter_fn passed to dma_request_channel is responsible for initializing the channel's private data. This implementation has the additional benefit of enabling a generic client-channel data passing mechanism. Reviewed-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp> Signed-off-by: Dan Williams <dan.j.williams@intel.com> Acked-by: Haavard Skinnemoen <hskinnemoen@atmel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-02-18lis3lv02d: add axes knowledge of HP Pavilion dv5 modelsGiuseppe Bilotta
Add support for HP Pavilion dv5. Since Intel-based models have an inverted x axis, while AMD-based models have an inverted y axis, we introduce a new macro that special-cases axis orientation based on two DMI entries: HP dv5 axis configuration is then based on both the PRODUCT and BOARD name. Signed-off-by: Giuseppe Bilotta <giuseppe.bilotta@gmail.com> Cc: Eric Piel <Eric.Piel@tremplin-utc.net> Cc: Pavel Machek <pavel@suse.cz> Tested-by: Palatis Tseng <palatis@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-02-18lis3lv02d: support both one- and two-byte sensorsGiuseppe Bilotta
Sensors responding with 0x3B to WHO_AM_I only have one data register per direction, thus returning a signed byte from the position which is occupied by the MSB in sensors responding with 0x3A. Since multiple sensors share the reply to WHO_AM_I, we rename the defines to better indicate what they identify (family of single and double precision sensors). We support both kind of sensors by checking for the sensor type on init and defining appropriate data-access routines and sensor limits (for the joystick) depending on what we find. [akpm@linux-foundation.org: coding-style fixes] Signed-off-by: Giuseppe Bilotta <giuseppe.bilotta@gmail.com> Acked-by: Eric Piel <Eric.Piel@tremplin-utc.net> Cc: Pavel Machek <pavel@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-02-18hp accelerometer: add freefall detectionPavel Machek
This adds freefall handling to hp_accel driver. According to HP, it should just work, without us having to set the chip up by hand. hpfall.c is example .c program that parks the disk when accelerometer detects free fall. It should work; for now, it uses fixed 20seconds protection period. Signed-off-by: Pavel Machek <pavel@suse.cz> Cc: Thomas Renninger <trenn@suse.de> Cc: Éric Piel <eric.piel@tremplin-utc.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-02-18eeepc: should depend on INPUTAlexey Dobriyan
Otherwise with INPUT=m, EEEPC_LAPTOP=y one gets drivers/built-in.o: In function `input_sync': eeepc-laptop.c:(.text+0x18ce51): undefined reference to `input_event' drivers/built-in.o: In function `input_report_key': eeepc-laptop.c:(.text+0x18ce73): undefined reference to `input_event' drivers/built-in.o: In function `eeepc_hotk_check': eeepc-laptop.c:(.text+0x18d05f): undefined reference to `input_allocate_device' eeepc-laptop.c:(.text+0x18d10f): undefined reference to `input_register_device' eeepc-laptop.c:(.text+0x18d131): undefined reference to `input_free_device' drivers/built-in.o: In function `eeepc_backlight_exit': eeepc-laptop.c:(.text+0x18d546): undefined reference to `input_unregister_device' Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Cc: Len Brown <lenb@kernel.org> Cc: Ingo Molnar <mingo@elte.hu> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-02-18aoe: ignore vendor extension AoE responsesEd Cashin
The Welland ME-747K-SI AoE target generates unsolicited AoE responses that are marked as vendor extensions. Instead of ignoring these packets, the aoe driver was generating kernel messages for each unrecognized response received. This patch corrects the behavior. Signed-off-by: Ed Cashin <ecashin@coraid.com> Reported-by: <karaluh@karaluh.pl> Tested-by: <karaluh@karaluh.pl> Cc: <stable@kernel.org> Cc: Alex Buell <alex.buell@munted.org.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-02-18omap_hsmmc: Change while(); loops with finite versionJean Pihet
Replace the infinite 'while() ;' loops with a finite loop version. Signed-off-by: Jean Pihet <jpihet@mvista.com> Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2009-02-18omap_hsmmc: recover from transfer failuresJean Pihet
Timeouts during a command that has a data phase can result in the next command issued after the command that failed not being processed, i.e. no interrupt ever occurs to indicate the command has completed. This failure can result in a deadlock. This patch resets the data state machine to clear the error in case of a command timeout. Tested on OMAP3430 chip and intensive MMC/SD device removal while transferring data. Signed-off-by: Andy Lowe <alowe@mvista.com> Signed-off-by: Jean Pihet <jpihet@mvista.com> Signed-off-by: Adrian Hunter <ext-adrian.hunter@nokia.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2009-02-18omap_hsmmc: only MMC1 allows HCTL.SDVS != 1.8VDavid Brownell
Based on a patch from Tony Lindgren ... after initialization, never change HCTL.SDVS except for MMC1. The other controller instances only support 1.8V in that field, although they can suport other card/SDIO/eMMC/... voltages with level shifting solutions such as external transceivers. MMC2 behavior sanity tested on Overo/WLAN, OMAP3430 SDP, and custom hardware. MMC1 also sanity tested on those platforms plus Beagle. This also fixes a bug preventing MMC2 (and also presumably MMC3) from powering down when requested. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2009-02-18omap_hsmmc: card detect irq bugfixDavid Brownell
Work around lockdep issue when card detect IRQ handlers run in thread context ... it forces IRQF_DISABLED, which prevents all access to twl4030 card detect signals. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2009-02-18sdhci: fix led namingHelmut Schaa
Fix the led device naming for the sdhci driver. The led class documentation defines the led name to have the form "devicename:colour:function" while not applicable sections should be left blank. To comply with the documentation the led device name is changed from "mmc*" to "mmc*::". Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com> Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2009-02-18mmc_test: fix basic read testRabin Vincent
Due to a typo in the Basic Read test, it's currently identical to the Basic Write test. Fix this. Signed-off-by: Rabin Vincent <rabin@rab.in> Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2009-02-18s3cmci: Fix hangup in do_pio_write()Yauhen Kharuzhy
This commit fixes the regression what was added by commit 088a78af978d0c8e339071a9b2bca1f4cb368f30 "s3cmci: Support transfers which are not multiple of 32 bits." fifo_free() now returns amount of available space in FIFO buffer in bytes. But do_pio_write() writes to FIFO 32-bit words. Condition for return from cycle is (fifo_free() == 0), but when fifo has 1..3 bytes of free space then this condition will never be true and system hangs. This patch changes condition in the while() to (fifo_free() > 3). Signed-off-by: Yauhen Kharuzhy <jekhor@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2009-02-18cciss: PCI power management reset for kexecChip Coldwell
The kexec kernel resets the CCISS hardware in three steps: 1. Use PCI power management states to reset the controller in the kexec kernel. 2. Clear the MSI/MSI-X bits in PCI configuration space so that MSI initialization in the kexec kernel doesn't fail. 3. Use the CCISS "No-op" message to determine when the controller firmware has recovered from the PCI PM reset. [akpm@linux-foundation.org: cleanups] Signed-off-by: Mike Miller <mike.miller@hp.com> Cc: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-02-18paride/pg.c: xs(): &&/|| confusionRoel Kluin
&&/|| confusion Signed-off-by: Roel Kluin <roel.kluin@gmail.com> Cc: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-02-18block: fix bad definition of BIO_RW_SYNCJens Axboe
We can't OR shift values, so get rid of BIO_RW_SYNC and use BIO_RW_SYNCIO and BIO_RW_UNPLUG explicitly. This brings back the behaviour from before 213d9417fec62ef4c3675621b9364a667954d4dd. Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-02-18Revert "sdhci: force high speed capability on some controllers"Pierre Ossman
This reverts commit a4b76193774b463b922cab2f92450efb20d29ef0. It turned out that the controller had problem running at the higher speed, so go back to trusting the hardware capability bits. Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2009-02-18MMC: fix bug - SDHC card capacity not correctYi Li
Signed-off-by: Yi Li <yi.li@analog.com> Signed-off-by: Bryan Wu <cooloney@kernel.org> Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2009-02-17Add support for VT6415 PCIE PATA IDE Host ControllerZlatko Calusic
Signed-off-by: Zlatko Calusic <zlatko.calusic@iskon.hr> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-02-17USB/PCI: Fix resume breakage of controllers behind cardbus bridgesRafael J. Wysocki
If a USB PCI controller is behind a cardbus bridge, we are trying to restore its configuration registers too early, before the cardbus bridge is operational. To fix this, call pci_restore_state() from usb_hcd_pci_resume() and remove usb_hcd_pci_resume_early() which is no longer necessary (the configuration spaces of USB controllers that are not behind cardbus bridges will be restored by the PCI PM core with interrupts disabled anyway). This patch fixes the regression from 2.6.28 tracked as http://bugzilla.kernel.org/show_bug.cgi?id=12659 [ Side note: the proper long-term fix is probably to just force the unplug event at suspend time instead of doing a plug/unplug at resume time, but this patch is fine regardless - Linus ] Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Reported-by: Miles Lane <miles.lane@gmail.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-02-17Merge branch 'core-fixes-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'core-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: iommu: fix Intel IOMMU write-buffer flushing futex: fix reference leak Trivial conflicts fixed manually in drivers/pci/intel-iommu.c
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-30 12:04:22 +0000