aboutsummaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2006-02-22[SCSI] esp: fix eh lockingChristoph Hellwig
esp_reset didn't get fixed when the EH locking changed. ->eh_bus_reset_handler is now called without the host lock held. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-02-22[PATCH] padlock: Fix typo that broke 256-bit keysHerbert Xu
A typo crept into the le32_to_cpu patch which broke 256-bit keys in the padlock driver. The following patch based on observations by Michael Heyse fixes the problem. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-02-21Merge branch 'upstream-fixes' of ↵Linus Torvalds
master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/libata-dev
2006-02-20Merge branch 'drm-patches' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6
2006-02-20Merge branch 'fixes.b8' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/viro/bird
2006-02-20Merge master.kernel.org:/pub/scm/linux/kernel/git/davej/agpgartLinus Torvalds
2006-02-20Merge master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6Linus Torvalds
2006-02-20[PATCH] s390: revert dasd eer moduleHeiko Carstens
Revert dasd eer module until we have a common understanding of how the interface should be. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-02-20[PATCH] s390: dasd reference countingPeter Oberparleiter
When using the dasd diag discipline, the base discipline module (eckd or fba) can be unloaded, even though the dasd driver requires both discipline modules (base and diag) to work correctly. Implement reference counting for both base and diag discipline modules in order to fix this. Signed-off-by: Peter Oberparleiter <peter.oberparleiter@de.ibm.com> Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-02-20[PATCH] s390: V=V qdio fixesFrank Pavlic
Using FCP devices with V=V support, the input queue stalled when CCQ 97 had been returned in qdio_do_eqbs. When this happen we have to reissue the eqbs instruction. Another bug was when V=V was enabled we checked if hardware has SIGA-sync support. If not we returned with 0 from tiqdio_is_inbound_q_done. Thus qdio lost initiative on FCP devices and input queue stalled. Running devices in V=V there is no SIGA-sync support but nevertheless we have to process tiqdio_is_inbound_q_done either. Signed-off-by: Frank Pavlic <fpavlic@de.ibm.com> Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-02-20[PATCH] radeonfb: resume support for Samsung P35 laptopsCarl-Daniel Hailfinger
Make resume from suspend-to-ram possible for Samsung P35 laptops. The radeon mobility 9700 chip on Samsung P35 laptops locks up everything on resume from suspend-to-ram if it is not reinitialized. VGA compatible controller: ATI Technologies Inc RV350 [Mobility Radeon 9600 M10] Class 0300: 1002:4e50 Subsystem: 144d:c00c Unfortunately, the DMI strings are mostly identical for all Samsung laptops. So we match the PCI ID and subsystem ID of the graphics card which is unique for each Samsung laptop model. Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-02-20[PATCH] drivers/fc4/fc.c: memset correct lengthAlexey Dobriyan
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-02-20[PATCH] ipw2200: Suppress warning messageZhu Yi
The following message will be only printed if DEBUG_NOTIF is on. "Unknown notification: subtype=40,flags=0xa0,size=40" Signed-off-by: Zhu Yi <yi.zhu@intel.com> Cc: James Ketrenos <jketreno@linux.intel.com> Cc: Jeff Garzik <jgarzik@pobox.com> Cc: "John W. Linville" <linville@tuxdriver.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-02-20[PATCH] pktcdvd: Only return -EROFS when appropriatePeter Osterlund
When attempting to open the device for writing, only return -EROFS if the disc appears to be readable but not writable. Signed-off-by: Peter Osterlund <petero2@telia.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-02-20[PATCH] pktcdvd: Fix the logic in the pkt_writable_track functionPeter Osterlund
Fix the pkt_writable_track() function to make it work correctly for all types of CD/DVD discs. Signed-off-by: Peter Osterlund <petero2@telia.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-02-20[PATCH] pktcdvd: Remove useless printk statementsPeter Osterlund
Writing the detected disc type in the kernel log is not useful during normal use of the driver, so remove the printk statements. Signed-off-by: Peter Osterlund <petero2@telia.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-02-20[PATCH] pktcdvd: Rename functions and make their return values sanePeter Osterlund
Boolean functions should return non-zero when they mean "true", otherwise the calling code looks weird. (As suggested by Linus.) Signed-off-by: Peter Osterlund <petero2@telia.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-02-20[PATCH] pktcdvd: Correctly set rq->cmd_len in pkt_generic_packet()Peter Osterlund
It looks like the code in pkt_generic_packet() worked by luck in the past, but after commit 186d330e682210100c671355580a8592e4a21692 leaving rq->cmd_len uninitialized doesn't work any more. Signed-off-by: Peter Osterlund <petero2@telia.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-02-20[PATCH] spi: Fix modular master driver remove and device suspend/removeStephen Street
Fix two problems in the spi subsystem: 1) spi subsystem core dumps when modular spi master is unloaded. 2) spi subsystem core dumps when spi slave device is suspended/resumed and module slave driver is not loaded. Signed-off-by: Stephen Street <stephen@streetfiresound.com> Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Cc: Greg KH <greg@kroah.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-02-20[PATCH] cfi_cmdset_0001: fix range for cache invalidationAlexey Korolev
I found an issue in cfi_cmdset0001.c. It is related to cache region invalidation in the buffered write procedure. The code performs cache invalidation from "cmd_addr" to "cmd_adr + len" in do_write_buffer() while we modify region from "adr" to "adr+len". This issue affects writes + reads of data by small chunks. Signed-off-by: Nicolas Pitre <nico@cam.org> Acked-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-02-20[PATCH] Terminate process that fails on a constrained allocationChristoph Lameter
Some allocations are restricted to a limited set of nodes (due to memory policies or cpuset constraints). If the page allocator is not able to find enough memory then that does not mean that overall system memory is low. In particular going postal and more or less randomly shooting at processes is not likely going to help the situation but may just lead to suicide (the whole system coming down). It is better to signal to the process that no memory exists given the constraints that the process (or the configuration of the process) has placed on the allocation behavior. The process may be killed but then the sysadmin or developer can investigate the situation. The solution is similar to what we do when running out of hugepages. This patch adds a check before we kill processes. At that point performance considerations do not matter much so we just scan the zonelist and reconstruct a list of nodes. If the list of nodes does not contain all online nodes then this is a constrained allocation and we should kill the current process. Signed-off-by: Christoph Lameter <clameter@sgi.com> Cc: Nick Piggin <nickpiggin@yahoo.com.au> Cc: Andi Kleen <ak@muc.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-02-20[AGPGART] Add some informational printk to nforce GART failure path.Dave Jones
Signed-off-by: Dave Jones <davej@redhat.com>
2006-02-20[PATCH] libata: make ata_sg_setup_one() trim zero length sgTejun Heo
This patch makes ata_sg_setup_one() trim sg entry (thus making qc->n_elem zero) if padding results in zero length sg entry. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2006-02-20[PATCH] libata: fix WARN_ON() condition in *_fill_sg()Tejun Heo
For ATAPI commands, padding can reduce qc->n_elem by one and thus to zero making assert(qc->n_elem > 0)'s in ata_fill_sg() and qs_fill_sg() fail for legal commands. This patch fixes the assert()'s to take qc->pad_len into account. Although the condition check seems a bit excessive, as this part of code isn't still stable yet, I think it's worth to keep those. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2006-02-19[IRDA]: irda-usb bug fixesJean Tourrilhes
This patch fixes 2 bugs in the USB-IrDA code. The first one is a buffer overrun in the RX path. We are now using IRDA_SKB_MAX_MTU when initializing the Rx URB. The second one is a potential stack recursion when unplugging the USB dongle. It seems that first we get the Rx URB with a generic error code, and after a while the Rx URB comes again with a "disconnect" error code. Since we are resubmitting the Rx URB immediately after receiving the first error one, we might enter an endless loop. When getting an error Rx URB, the patch defers the Rx URB resubmitting so that it gives us a chance to catch the disconnect one, in case the dongle has juts been unplugged. Tested against 2.6.16-rc2. Patch from Jean Tourrilhes Signed-off-by: Jean Tourrilhes <jt@hpl.hp.com> Signed-off-by: Samuel Ortiz <samuel.ortiz@nokia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-02-18[PATCH] don't mangle INQUIRY if cmddt or evpd bits are setAl Viro
sbp2.c mangles INQUIRY response in a way that only applies to standard inquiry data (i.e. when both cmddt and evpd bits are 0). Leave other cases alone; e.g. when asking for VPD the length of reply is in byte 3, not 4 and byte 4 is the first byte of device serial number. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2006-02-18drm: fix brace placementDave Airlie
Signed-off-by: Dave Airlie <airlied@linux.ie>
2006-02-18drm: radeon add r300 TX_CNTL and verify bitblt packetsDave Airlie
The Xgl on r300 doesn't work unless you add a verify bitblt function to the DRM, and we need to pass TX_CNTL to flush texture caches. Signed-off-by: Dave Airlie <airlied@linux.ie>
2006-02-18drm: fixup i915 interrupt on X server exitDave Airlie
Fixes: IRQ disabled (i915?) when switchig between gnome themes (gnome-theme-manager) Signed-off-by: Dave Airlie <airlied@linux.ie>
2006-02-17[PATCH] ACPI: fix vendor resource length computationBjorn Helgaas
acpi_rs_get_list_length() needs to account for all the vendor-defined data bytes. Failing to include these causes buffers to be sized too small, which causes slab corruption when we later convert AML to resources and run off the end of the buffer. This causes slab corruption on machines that use ACPI vendor-defined resources. All HP ia64 machines do, and I'm told that some NEC machines may as well. Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com> Cc: "Brown, Len" <len.brown@intel.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-02-17[PATCH] allow windfarm_pm112 module to loadJohannes Berg
The windfarm_pm112 module relies on smu_sat_get_sdb_partition which is in windfarm_smu_sat.c but is not exported to modules, so despite Kconfig having the option to build the pm112 as modules, this can never be loaded. This patch fixes that by exporting smu_sat_get_sdb_partition with EXPORT_SYMBOL_GPL Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-02-17[PATCH] s390: fix assignment instead of check in ccw_device_set_online()Cornelia Huck
Fix assignment instead of check in ccw_device_set_online(). Also remove unneeded assignment in ccw_device_do_sense(). Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-02-17[PATCH] s390: ccw device disbandingCornelia Huck
If __ccw_device_disband_start() fails to initiate disbanding, it should finish with ccw_device_disband_done() (which leaves the device in offline state) instead of ccw_device_verify_done() (which leaves the device in online state). Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-02-17[PATCH] Infineon TPM: IO-port leakage fix, WTX-bugfixMarcel Selhorst
Fix IO-port leakage from request_region in case of error during TPM initialization, adds more pnp-verification and fixes a WTX-bug. Signed-off-by: Marcel Selhorst <selhorst@crypto.rub.de> Acked-by: Kylene Jo Hall <kjhall@us.ibm.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-02-17Merge branch 'upstream-fixes' of ↵Linus Torvalds
master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/libata-dev
2006-02-17[PATCH] Add missing FUA write to sata_mv dma command listJens Axboe
Signed-off-by: Jens Axboe <axboe@suse.de> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2006-02-17[PATCH] libata: minor fix for 2.6.16-rc3Albert Lee
- Fix the array index value in ata_rwcmd_protocol() for the added FUA commands. - Filter out ATAPI packet command error messages in ata_pio_error() Signed-off-by: Albert Lee <albertcc@tw.ibm.com> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2006-02-17[PATCH] Necessary evil to get sata_vsc to initialize with Intel iq3124h hbaDan Williams
* libata does not care about error interrupts, so handle them locally * the interrupts that are ignored only appear to happen at init time Signed-off-by: Dan Williams <dan.j.williams@intel.com> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2006-02-17[PATCH] bonding: fix a locking bug in bond_releaseJay Vosburgh
bond_release returns EINVAL without releasing the bond lock if the slave device is not being bonded by the bond. The following patch ensures that the lock is released in this case. Signed-off-by: Stephen J. Bevan <stephen@dino.dnsalias.com> Acked-by: Jay Vosburgh <fubar@us.ibm.com> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2006-02-17[PATCH] s390: some qeth driver fixesFrank Pavlic
[patch 2/2] s390: some qeth driver fixes From: Frank Pavlic <fpavlic@de.ibm.com> - fixed kernel panic when using EDDP support in Layer 2 mode - NULL pointer exception in qeth_set_offline fixed. - setting EDDP in Layer 2 mode did not set NETIF_F_(SG/TSO) flags when device became online. - use sscanf for parsing and converting IPv4 addresses from string to __u8 values. - qeth_string_to_ipaddr6 fixed. in case of double colon the converted IPv6 address out from the string was not correct in previous implementation. Signed-off-by: Frank Pavlic <fpavlic@de.ibm.com> diffstat: qeth.h | 112 +++++++++++++++++++++++++----------------------------------- qeth_eddp.c | 11 ++++- qeth_main.c | 17 +++------ 3 files changed, 63 insertions(+), 77 deletions(-) Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2006-02-17[PATCH] s390: lcs performance enhancementsFrank Pavlic
[patch 1/2] s390: lcs performance enhancements From: Klaus Wacker <kdwacker@de.ibm.com> - When flood pinging (with large packet size) an LCS device, about 90 % of all packets are dropped by driver. - increased number of lcs IO buffers to 32. - use netif_stop_queue/netif_wake_queue in lcs_start_xmit routine - don't lock the whole xmit routine but just the piece of code where tx_buffer is touched. Signed-off-by: Frank Pavlic <fpavlic@de.ibm.com> diffstat: lcs.c | 31 +++++++++++++++++-------------- lcs.h | 2 +- 2 files changed, 18 insertions(+), 15 deletions(-) Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2006-02-17[PATCH] smctr warning fixAndrew Morton
drivers/net/tokenring/smctr.c: In function `smctr_load_firmware': drivers/net/tokenring/smctr.c:2981: warning: assignment discards qualifiers from pointer target type Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2006-02-17[PATCH] sky2: speed setting fixStephen Hemminger
Users report problems w/ auto-negotiation disabled and the link set to 100/Half or 10/Half. Problems range from poor performance to no link at all. The current sky2 code does not set things properly on link up if autonegotiation is disabled. Plus it does not contemplate a 10Mbit setting at all. This patch corrects that. Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: Stephen Hemminger <shemminger@osdl.org> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2006-02-17[PATCH] skge: speed settingStephen Hemminger
This is a clone of John Linville's fixed for speed setting on sky2 driver. The skge driver has the same code (and bug). It would not allow manually forcing 100 and 10 mbit. Signed-off-by: Stephen Hemminger <shemminger@osdl.org> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2006-02-17[PATCH] skge: no longer experimentalStephen Hemminger
Take the experimental dependency of skge driver, it is as stable as the others. Signed-off-by: Stephen Hemminger <shemminger@osdl.org> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2006-02-17[PATCH] sk98lin: no d-link support (kconfig)Stephen Hemminger
The sk98lin driver was changed a while ago to remove support for the D-Link 530T card because that hardware has no working VPD data. The help text for Kconfig was not updated. Signed-off-by: Stephen Hemminger <shemminger@osdl.org> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2006-02-17[PATCH] Wavelan_cs bitfield fixesJean Tourrilhes
Some bitfields were incorrectly initialised in wavelan_cs, causing some compiler warning. Also killed a error message that should not be there... Signed-off-by: Jean Tourrilhes <jt@hpl.hp.com> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2006-02-17Merge branch 'for-jeff' of ↵Jeff Garzik
git://electric-eye.fr.zoreil.com/home/romieu/linux-2.6
2006-02-17Merge branch 'upstream-fixes' of ↵Jeff Garzik
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-2.6
2006-02-17[PATCH] Fix SGI O2 compile error in drivers/video/gbefb.cJoshua Kinard
A sysfs function call uses the wrong parameter, and thus breaks a build on SGI O2. CC drivers/video/gbefb.o drivers/video/gbefb.c: In function ‘gbefb_remove’: drivers/video/gbefb.c:1246: error: ‘dev’ undeclared (first use in this function) drivers/video/gbefb.c:1246: error: (Each undeclared identifier is reported only once drivers/video/gbefb.c:1246: error: for each function it appears in.) make[2]: *** [drivers/video/gbefb.o] Error 1 Signed-off-by: Joshua Kinard <kumba@gentoo.org> Signed-off-by: Antonino Daplas <adaplas@pol.net> Signed-off-by: Martin Michlmayr <tbm@cyrius.com> Signed-off-by: Linus Torvalds <torvalds@osdl.org>