| Age | Commit message (Collapse) | Author |
|---|
|
This updates references to drafts in comments which must be about 10
years old. Internet draft draft-ietf-tcpimpl-prob-03.txt expired in 1998
and was replaced by RFC 2525 in March 1999.
Section 3.10 of the draft maps almost identically into section 2.17 of RFC
2525: both are entitled "Failure to RST on close with data pending", the
differences in text body amount to a typo and minor sentence change.
Signed-off-by: Gerrit Renker <gerrit@erg.abdn.ac.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This is (mostly) automated change using magic:
sed -e '/struct sock \*sk/ N' -e '/struct sock \*sk/ N'
-e '/struct sock \*sk/ N' -e '/struct sock \*sk/ N'
-e 's|struct sock \*sk,[\n\t ]*struct tcp_sock \*tp\([^{]*\n{\n\)|
struct sock \*sk\1\tstruct tcp_sock *tp = tcp_sk(sk);\n|g'
-e 's|struct sock \*sk, struct tcp_sock \*tp|
struct sock \*sk|g' -e 's|sk, tp\([^-]\)|sk\1|g'
Fixed four unused variable (tp) warnings that were introduced.
In addition, manually added newlines after local variables and
tweaked function arguments positioning.
$ gcc --version
gcc (GCC) 4.1.1 20060525 (Red Hat 4.1.1-1)
...
$ codiff -fV built-in.o.old built-in.o.new
net/ipv4/route.c:
rt_cache_flush | +14
1 function changed, 14 bytes added
net/ipv4/tcp.c:
tcp_setsockopt | -5
tcp_sendpage | -25
tcp_sendmsg | -16
3 functions changed, 46 bytes removed
net/ipv4/tcp_input.c:
tcp_try_undo_recovery | +3
tcp_try_undo_dsack | +2
tcp_mark_head_lost | -12
tcp_ack | -15
tcp_event_data_recv | -32
tcp_rcv_state_process | -10
tcp_rcv_established | +1
7 functions changed, 6 bytes added, 69 bytes removed, diff: -63
net/ipv4/tcp_output.c:
update_send_head | -9
tcp_transmit_skb | +19
tcp_cwnd_validate | +1
tcp_write_wakeup | -17
__tcp_push_pending_frames | -25
tcp_push_one | -8
tcp_send_fin | -4
7 functions changed, 20 bytes added, 63 bytes removed, diff: -43
built-in.o.new:
18 functions changed, 40 bytes added, 178 bytes removed, diff: -138
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@helsinki.fi>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The function is quite big and has several call sites and nothing
to collapse by compiler optimization on inlining.
Besides it's nicer to read in a in .c file.
Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Spring cleaning time...
There seems to be a lot of places in the network code that have
extra bogus semicolons after conditionals. Most commonly is a
bogus semicolon after: switch() { }
Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
tcp_memory_pressure and tcp_socket currently share a cache line with tcp_memory_allocated, tcp_sockets_allocated.
(Very hot cache line)
It makes sense to declare these variables as __read_mostly, to avoid false sharing on SMP.
ffffffff8081d9c0 B tcp_orphan_count
ffffffff8081d9c4 B tcp_memory_allocated
ffffffff8081d9c8 B tcp_sockets_allocated
ffffffff8081d9cc B tcp_memory_pressure
ffffffff8081d9d0 b tcp_md5sig_users
ffffffff8081d9d8 b tcp_md5sig_pool
ffffffff8081d9e0 b warntime.31570
ffffffff8081d9e8 b tcp_socket
Signed-off-by: Eric Dumazet <dada1@cosmosbay.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
So that it is also an offset from skb->head, reduces its size from 8 to 4 bytes
on 64bit architectures, allowing us to combine the 4 bytes hole left by the
layer headers conversion, reducing struct sk_buff size to 256 bytes, i.e. 4
64byte cachelines, and since the sk_buff slab cache is SLAB_HWCACHE_ALIGN...
:-)
Many calculations that previously required that skb->{transport,network,
mac}_header be first converted to a pointer now can be done directly, being
meaningful as offsets or pointers.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
For the places where we need a pointer to the transport header, it is
still legal to touch skb->h.raw directly if just adding to,
subtracting from or setting it to another layer header.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This allows the write queue implementation to be changed,
for example, to one which allows fast interval searching.
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Change tcp_mem initialization function. The fraction of total memory
is now a continuous function of memory size, and independent of page
size.
Signed-off-by: John Heffner <jheffner@psc.edu>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The locking calls assumed that these code paths were only
invoked in software interrupt context, but that isn't true.
Therefore we need to use spin_{lock,unlock}_bh() throughout.
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
ehash table layout is currently this one :
First half of this table is used by sockets not in TIME_WAIT state
Second half of it is used by sockets in TIME_WAIT state.
This is non optimal because of for a given hash or socket, the two chain heads
are located in separate cache lines.
Moreover the locks of the second half are never used.
If instead of this halving, we use two list heads in inet_ehash_bucket instead
of only one, we probably can avoid one cache miss, and reduce ram usage,
particularly if sizeof(rwlock_t) is big (various CONFIG_DEBUG_SPINLOCK,
CONFIG_DEBUG_LOCK_ALLOC settings). So we still halves the table but we keep
together related chains to speedup lookups and socket state change.
In this patch I did not try to align struct inet_ehash_bucket, but a future
patch could try to make this structure have a convenient size (a power of two
or a multiple of L1_CACHE_SIZE).
I guess rwlock will just vanish as soon as RCU is plugged into ehash :) , so
maybe we dont need to scratch our heads to align the bucket...
Note : In case struct inet_ehash_bucket is not a power of two, we could
probably change alloc_large_system_hash() (in case it use __get_free_pages())
to free the unused space. It currently allocates a big zone, but the last
quarter of it could be freed. Again, this should be a temporary 'problem'.
Patch tested on ipv4 tcp only, but should be OK for IPV6 and DCCP.
Signed-off-by: Eric Dumazet <dada1@cosmosbay.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
It should call tcp_free_md5sig_pool() not __tcp_free_md5sig_pool()
so that it does proper refcounting.
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This patch contains the following possible cleanups:
- make the following needlessly global functions statis:
- ipv4/tcp.c: __tcp_alloc_md5sig_pool()
- ipv4/tcp_ipv4.c: tcp_v4_reqsk_md5_lookup()
- ipv4/udplite.c: udplite_rcv()
- ipv4/udplite.c: udplite_err()
- make the following needlessly global structs static:
- ipv4/tcp_ipv4.c: tcp_request_sock_ipv4_ops
- ipv4/tcp_ipv4.c: tcp_sock_ipv4_specific
- ipv6/tcp_ipv6.c: tcp_request_sock_ipv6_ops
- net/ipv{4,6}/udplite.c: remove inline's from static functions
(gcc should know best when to inline them)
Signed-off-by: Adrian Bunk <bunk@stusta.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Heck, it even saves us some few bytes:
[acme@newtoy net-2.6.20]$ codiff -f /tmp/tcp.o.before ../OUTPUT/qemu/net-2.6.20/net/ipv4/tcp.o
/pub/scm/linux/kernel/git/acme/net-2.6.20/net/ipv4/tcp.c:
tcp_sendpage | -7
tcp_sendmsg | -5
2 functions changed, 12 bytes removed
[acme@newtoy net-2.6.20]$
Signed-off-by: Arnaldo Carvalho de Melo <acme@mandriva.com>
|
|
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Based on implementation by Rick Payne.
Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Fix up tcp_mem initial settings to take into account the size of the
hash entries (different on SMP and non-SMP systems).
Signed-off-by: John Heffner <jheffner@psc.edu>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This patch removes consideration of high memory when determining TCP
hash table sizes. Taking into account high memory results in tcp_mem
values that are too large.
Signed-off-by: John Heffner <jheffner@psc.edu>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
It does not affect either mss-sized connections (obviously) or
connections controlled by Nagle (because there is only one small
segment in flight).
The idea is to record the fact that a small segment arrives on a
connection, where one small segment has already been received and
still not-ACKed. In this case ACK is forced after tcp_recvmsg() drains
receive buffer.
In other words, it is a "soft" each-2nd-segment ACK, which is enough
to preserve ACK clock even when ABC is enabled.
Signed-off-by: Alexey Kuznetsov <kuznet@ms2.inr.ac.ru>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Change net/core, ipv4 and ipv6 sysctl variables to __read_mostly.
Couldn't actually measure any performance increase while testing (.3%
I consider noise), but seems like the right thing to do.
Signed-off-by: Brian Haley <brian.haley@hp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Replace CHECKSUM_HW by CHECKSUM_PARTIAL (for outgoing packets, whose
checksum still needs to be completed) and CHECKSUM_COMPLETE (for
incoming packets, device supplied full checksum).
Patch originally from Herbert Xu, updated by myself for 2.6.18-rc3.
Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Based upon guidance from Alexey Kuznetsov.
When linger2 is active, we check to see if the fin_wait2
timeout is longer than the timewait. If it is, we schedule
the keepalive timer for the difference between the timewait
timeout and the fin_wait2 timeout.
When this orphan socket is seen by tcp_keepalive_timer()
it will try to transform this fin_wait2 socket into a
fin_wait2 mini-socket, again if linger2 is active.
Not all paths were setting this initial keepalive timer correctly.
The tcp input path was doing it correctly, but tcp_close() wasn't,
potentially making the socket linger longer than it really needs to.
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
We don't want nasty Xen guests to pass a TCPv6 packet in with gso_type set
to TCPv4 or even UDP (or a packet that's both TCP and UDP).
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
* master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6:
[IPV6]: Added GSO support for TCPv6
[NET]: Generalise TSO-specific bits from skb_setup_caps
[IPV6]: Added GSO support for TCPv6
[IPV6]: Remove redundant length check on input
[NETFILTER]: SCTP conntrack: fix crash triggered by packet without chunks
[TG3]: Update version and reldate
[TG3]: Add TSO workaround using GSO
[TG3]: Turn on hw fix for ASF problems
[TG3]: Add rx BD workaround
[TG3]: Add tg3_netif_stop() in vlan functions
[TCP]: Reset gso_segs if packet is dodgy
|
|
This patch generalises the TSO-specific bits from sk_setup_caps by adding
the sk_gso_type member to struct sock. This makes sk_setup_caps generic
so that it can be used by TCPv6 or UFO.
The only catch is that whoever uses this must provide a GSO implementation
for their protocol which I think is a fair deal :) For now UFO continues to
live without a GSO implementation which is OK since it doesn't use the sock
caps field at the moment.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This patch adds GSO support for IPv6 and TCPv6.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
I wasn't paranoid enough in verifying GSO information. A bogus gso_segs
could upset drivers as much as a bogus header would. Let's reset it in
the per-protocol gso_segment functions.
I didn't verify gso_size because that can be verified by the source of
the dodgy packets.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Signed-off-by: Jörn Engel <joern@wohnheim.fh-wedel.de>
Signed-off-by: Adrian Bunk <bunk@stusta.de>
|
|
When GSO packets come from an untrusted source (e.g., a Xen guest domain),
we need to verify the header integrity before passing it to the hardware.
Since the first step in GSO is to verify the header, we can reuse that
code by adding a new bit to gso_type: SKB_GSO_DODGY. Packets with this
bit set can only be fed directly to devices with the corresponding bit
NETIF_F_GSO_ROBUST. If the device doesn't have that bit, then the skb
is fed to the GSO engine which will allow the packet to be sent to the
hardware if it passes the header check.
This patch changes the sg flag to a full features flag. The same method
can be used to implement TSO ECN support. We simply have to mark packets
with CWR set with SKB_GSO_ECN so that only hardware with a corresponding
NETIF_F_TSO_ECN can accept them. The GSO engine can either fully segment
the packet, or segment the first MTU and pass the rest to the hardware for
further segmentation.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Fix checksum problems in the GSO code path for CHECKSUM_HW packets.
The ipv4 TCP pseudo header checksum has to be adjusted for GSO
segmented packets.
The adjustment is needed because the length field in the pseudo-header
changes. However, because we have the inequality oldlen > newlen, we
know that delta = (u16)~oldlen + newlen is still a 16-bit quantity.
This also means that htonl(delta) + th->check still fits in 32 bits.
Therefore we don't have to use csum_add on this operations.
This is based on a patch by Michael Chan <mchan@broadcom.com>.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Acked-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This patch adds the GSO implementation for IPv4 TCP.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Having separate fields in sk_buff for TSO/UFO (tso_size/ufo_size) is not
going to scale if we add any more segmentation methods (e.g., DCCP). So
let's merge them.
They were used to tell the protocol of a packet. This function has been
subsumed by the new gso_type field. This is essentially a set of netdev
feature bits (shifted by 16 bits) that are required to process a specific
skb. As such it's easy to tell whether a given device can process a GSO
skb: you just have to and the gso_type field and the netdev's features
field.
I've made gso_type a conjunction. The idea is that you have a base type
(e.g., SKB_GSO_TCPV4) that can be modified further to support new features.
For example, if we add a hardware TSO type that supports ECN, they would
declare NETIF_F_TSO | NETIF_F_TSO_ECN. All TSO packets with CWR set would
have a gso_type of SKB_GSO_TCPV4 | SKB_GSO_TCPV4_ECN while all other TSO
packets would be SKB_GSO_TCPV4. This means that only the CWR packets need
to be emulated in software.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The current stack treats NETIF_F_HW_CSUM and NETIF_F_NO_CSUM
identically so we test for them in quite a few places. For the sake
of brevity, I'm adding the macro NETIF_F_GEN_CSUM for these two. We
also test the disjunct of NETIF_F_IP_CSUM and the other two in various
places, for that purpose I've added NETIF_F_ALL_CSUM.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Locks down user pages and sets up for DMA in tcp_recvmsg, then calls
dma_async_try_early_copy in tcp_v4_do_rcv
Signed-off-by: Chris Leech <christopher.leech@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Add an extra argument to sk_eat_skb, and make it move early copied
packets to the async_wait_queue instead of freeing them.
Signed-off-by: Chris Leech <christopher.leech@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Needed to be able to call tcp_cleanup_rbuf in tcp_input.c for I/OAT
Signed-off-by: Chris Leech <christopher.leech@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Calling sock_orphan inside bh_lock_sock in tcp_close can lead to dead
locks. For example, the inet_diag code holds sk_callback_lock without
disabling BH. If an inbound packet arrives during that admittedly tiny
window, it will cause a dead lock on bh_lock_sock. Another possible
path would be through sock_wfree if the network device driver frees the
tx skb in process context with BH enabled.
We can fix this by moving sock_orphan out of bh_lock_sock.
The tricky bit is to work out when we need to destroy the socket
ourselves and when it has already been destroyed by someone else.
By moving sock_orphan before the release_sock we can solve this
problem. This is because as long as we own the socket lock its
state cannot change.
So we simply record the socket state before the release_sock
and then check the state again after we regain the socket lock.
If the socket state has transitioned to TCP_CLOSE in the time being,
we know that the socket has been destroyed. Otherwise the socket is
still ours to keep.
Note that I've also moved the increment on the orphan count forward.
This may look like a problem as we're increasing it even if the socket
is just about to be destroyed where it'll be decreased again. However,
this simply enlarges a window that already exists. This also changes
the orphan count test by one.
Considering what the orphan count is meant to do this is no big deal.
This problem was discoverd by Ingo Molnar using his lock validator.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
* master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6:
[NETFILTER] x_table.c: sem2mutex
[IPV4]: Aggregate route entries with different TOS values
[TCP]: Mark tcp_*mem[] __read_mostly.
[TCP]: Set default max buffers from memory pool size
[SCTP]: Fix up sctp_rcv return value
[NET]: Take RTNL when unregistering notifier
[WIRELESS]: Fix config dependencies.
[NET]: Fill in a 32-bit hole in struct sock on 64-bit platforms.
[NET]: Ensure device name passed to SO_BINDTODEVICE is NULL terminated.
[MODULES]: Don't allow statically declared exports
[BRIDGE]: Unaligned accesses in the ethernet bridge
|
|
Implement the half-closed devices notifiation, by adding a new POLLRDHUP
(and its alias EPOLLRDHUP) bit to the existing poll/select sets. Since the
existing POLLHUP handling, that does not report correctly half-closed
devices, was feared to be changed, this implementation leaves the current
POLLHUP reporting unchanged and simply add a new bit that is set in the few
places where it makes sense. The same thing was discussed and conceptually
agreed quite some time ago:
http://lkml.org/lkml/2003/7/12/116
Since this new event bit is added to the existing Linux poll infrastruture,
even the existing poll/select system calls will be able to use it. As far
as the existing POLLHUP handling, the patch leaves it as is. The
pollrdhup-2.6.16.rc5-0.10.diff defines the POLLRDHUP for all the existing
archs and sets the bit in the six relevant files. The other attached diff
is the simple change required to sys/epoll.h to add the EPOLLRDHUP
definition.
There is "a stupid program" to test POLLRDHUP delivery here:
http://www.xmailserver.org/pollrdhup-test.c
It tests poll(2), but since the delivery is same epoll(2) will work equally.
Signed-off-by: Davide Libenzi <davidel@xmailserver.org>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Michael Kerrisk <mtk-manpages@gmx.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
|
|
Suggested by Stephen Hemminger.
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This patch sets the maximum TCP buffer sizes (available to automatic
buffer tuning, not to setsockopt) based on the TCP memory pool size.
The maximum sndbuf and rcvbuf each will be up to 4 MB, but no more
than 1/128 of the memory pressure threshold.
Signed-off-by: John Heffner <jheffner@psc.edu>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
No code changes, just tidying up, in some cases moving EXPORT_SYMBOLs
to just after the function exported, etc.
Signed-off-by: Arnaldo Carvalho de Melo <acme@mandriva.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Signed-off-by: Arnaldo Carvalho de Melo <acme@mandriva.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This patch extends {get|set}sockopt compatibility layer in order to
move protocol specific parts to their place and avoid huge universal
net/compat.c file in the future.
Signed-off-by: Dmitry Mishin <dim@openvz.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
As DCCP needs to be called in the same spots.
Now we have a member in inet_sock (is_icsk), set at sock creation time from
struct inet_protosw->flags (if INET_PROTOSW_ICSK is set, like for TCP and
DCCP) to see if a struct sock instance is a inet_connection_sock for places
like the ones in ip_sockglue.c (v4 and v6) where we previously were looking if
sk_type was SOCK_STREAM, that is insufficient because we now use the same code
for DCCP, that has sk_type SOCK_DCCP.
Signed-off-by: Arnaldo Carvalho de Melo <acme@mandriva.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
And move it to struct inet_connection_sock. DCCP will use it in the
upcoming changesets.
Signed-off-by: Arnaldo Carvalho de Melo <acme@mandriva.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
