From ca82d85bc2512b759ff6356300b46e6de5b106da Mon Sep 17 00:00:00 2001 From: Russell King Date: Thu, 3 Nov 2005 10:06:35 +0000 Subject: [ARM] Fix more 3016/1 breakage Signed-off-by: Russell King --- arch/arm/mach-clps711x/edb7211-mm.c | 8 ++++---- arch/arm/mach-ixp2000/enp2611.c | 12 ++++++------ 2 files changed, 10 insertions(+), 10 deletions(-) diff --git a/arch/arm/mach-clps711x/edb7211-mm.c b/arch/arm/mach-clps711x/edb7211-mm.c index 72f8bb05d55..0d52e085125 100644 --- a/arch/arm/mach-clps711x/edb7211-mm.c +++ b/arch/arm/mach-clps711x/edb7211-mm.c @@ -55,22 +55,22 @@ static struct map_desc edb7211_io_desc[] __initdata = { .virtual = EP7211_VIRT_EXTKBD, .pfn = __phys_to_pfn(EP7211_PHYS_EXTKBD), .length = SZ_1M, - .type - MT_DEVICE + .type = MT_DEVICE, }, { /* and CS8900A Ethernet chip */ .virtual = EP7211_VIRT_CS8900A, .pfn = __phys_to_pfn(EP7211_PHYS_CS8900A), .length = SZ_1M, - .type = MT_DEVICE + .type = MT_DEVICE, }, { /* flash banks */ .virtual = EP7211_VIRT_FLASH1, .pfn = __phys_to_pfn(EP7211_PHYS_FLASH1), .length = SZ_8M, - .type = MT_DEVICE + .type = MT_DEVICE, }, { .virtual = EP7211_VIRT_FLASH2, .pfn = __phys_to_pfn(EP7211_PHYS_FLASH2), .length = SZ_8M, - .type = MT_DEVICE + .type = MT_DEVICE, } }; diff --git a/arch/arm/mach-ixp2000/enp2611.c b/arch/arm/mach-ixp2000/enp2611.c index 7719c478aa8..61f6006241b 100644 --- a/arch/arm/mach-ixp2000/enp2611.c +++ b/arch/arm/mach-ixp2000/enp2611.c @@ -69,19 +69,19 @@ static struct sys_timer enp2611_timer = { static struct map_desc enp2611_io_desc[] __initdata = { { .virtual = ENP2611_CALEB_VIRT_BASE, - .physical = ENP2611_CALEB_PHYS_BASE, + .pfn = __phys_to_pfn(ENP2611_CALEB_PHYS_BASE), .length = ENP2611_CALEB_SIZE, - .type = MT_IXP2000_DEVICE + .type = MT_IXP2000_DEVICE, }, { .virtual = ENP2611_PM3386_0_VIRT_BASE, - .physical = ENP2611_PM3386_0_PHYS_BASE, + .pfn = __phys_to_pfn(ENP2611_PM3386_0_PHYS_BASE), .length = ENP2611_PM3386_0_SIZE, - .type = MT_IXP2000_DEVICE + .type = MT_IXP2000_DEVICE, }, { .virtual = ENP2611_PM3386_1_VIRT_BASE, - .physical = ENP2611_PM3386_1_PHYS_BASE, + .pfn = __phys_to_pfn(ENP2611_PM3386_1_PHYS_BASE), .length = ENP2611_PM3386_1_SIZE, - .type = MT_IXP2000_DEVICE + .type = MT_IXP2000_DEVICE, } }; -- cgit v1.2.3 From 0dcc7474b2fc547b2193dd1bafc4670a70d44e91 Mon Sep 17 00:00:00 2001 From: Russell King Date: Thu, 3 Nov 2005 10:17:44 +0000 Subject: [ARM] Add Realview default configuration file Signed-off-by: Russell King --- arch/arm/configs/realview_defconfig | 789 ++++++++++++++++++++++++++++++++++++ 1 file changed, 789 insertions(+) create mode 100644 arch/arm/configs/realview_defconfig diff --git a/arch/arm/configs/realview_defconfig b/arch/arm/configs/realview_defconfig new file mode 100644 index 00000000000..0485b2f1cc2 --- /dev/null +++ b/arch/arm/configs/realview_defconfig @@ -0,0 +1,789 @@ +# +# Automatically generated make config: don't edit +# Linux kernel version: 2.6.14-rc2 +# Thu Sep 29 14:50:10 2005 +# +CONFIG_ARM=y +CONFIG_MMU=y +CONFIG_UID16=y +CONFIG_RWSEM_GENERIC_SPINLOCK=y +CONFIG_GENERIC_CALIBRATE_DELAY=y + +# +# Code maturity level options +# +# CONFIG_EXPERIMENTAL is not set +CONFIG_CLEAN_COMPILE=y +CONFIG_BROKEN_ON_SMP=y +CONFIG_INIT_ENV_ARG_LIMIT=32 + +# +# General setup +# +CONFIG_LOCALVERSION="" +CONFIG_LOCALVERSION_AUTO=y +# CONFIG_SWAP is not set +CONFIG_SYSVIPC=y +# CONFIG_BSD_PROCESS_ACCT is not set +CONFIG_SYSCTL=y +# CONFIG_AUDIT is not set +CONFIG_HOTPLUG=y +CONFIG_KOBJECT_UEVENT=y +# CONFIG_IKCONFIG is not set +CONFIG_INITRAMFS_SOURCE="" +# CONFIG_EMBEDDED is not set +CONFIG_KALLSYMS=y +# CONFIG_KALLSYMS_ALL is not set +# CONFIG_KALLSYMS_EXTRA_PASS is not set +CONFIG_PRINTK=y +CONFIG_BUG=y +CONFIG_BASE_FULL=y +CONFIG_FUTEX=y +CONFIG_EPOLL=y +CONFIG_CC_OPTIMIZE_FOR_SIZE=y +CONFIG_SHMEM=y +CONFIG_CC_ALIGN_FUNCTIONS=0 +CONFIG_CC_ALIGN_LABELS=0 +CONFIG_CC_ALIGN_LOOPS=0 +CONFIG_CC_ALIGN_JUMPS=0 +# CONFIG_TINY_SHMEM is not set +CONFIG_BASE_SMALL=0 + +# +# Loadable module support +# +CONFIG_MODULES=y +CONFIG_MODULE_UNLOAD=y +CONFIG_OBSOLETE_MODPARM=y +# CONFIG_MODULE_SRCVERSION_ALL is not set +# CONFIG_KMOD is not set + +# +# System Type +# +# CONFIG_ARCH_CLPS7500 is not set +# CONFIG_ARCH_CLPS711X is not set +# CONFIG_ARCH_CO285 is not set +# CONFIG_ARCH_EBSA110 is not set +# CONFIG_ARCH_CAMELOT is not set +# CONFIG_ARCH_FOOTBRIDGE is not set +# CONFIG_ARCH_INTEGRATOR is not set +# CONFIG_ARCH_IOP3XX is not set +# CONFIG_ARCH_IXP4XX is not set +# CONFIG_ARCH_IXP2000 is not set +# CONFIG_ARCH_L7200 is not set +# CONFIG_ARCH_PXA is not set +# CONFIG_ARCH_RPC is not set +# CONFIG_ARCH_SA1100 is not set +# CONFIG_ARCH_S3C2410 is not set +# CONFIG_ARCH_SHARK is not set +# CONFIG_ARCH_LH7A40X is not set +# CONFIG_ARCH_OMAP is not set +# CONFIG_ARCH_VERSATILE is not set +CONFIG_ARCH_REALVIEW=y +# CONFIG_ARCH_IMX is not set +# CONFIG_ARCH_H720X is not set +# CONFIG_ARCH_AAEC2000 is not set + +# +# RealView platform type +# +CONFIG_MACH_REALVIEW_EB=y + +# +# Processor Type +# +CONFIG_CPU_32=y +CONFIG_CPU_ARM926T=y +# CONFIG_CPU_V6 is not set +CONFIG_CPU_32v5=y +CONFIG_CPU_ABRT_EV5TJ=y +CONFIG_CPU_CACHE_VIVT=y +CONFIG_CPU_COPY_V4WB=y +CONFIG_CPU_TLB_V4WBI=y + +# +# Processor Features +# +CONFIG_ARM_THUMB=y +# CONFIG_CPU_ICACHE_DISABLE is not set +# CONFIG_CPU_DCACHE_DISABLE is not set +# CONFIG_CPU_DCACHE_WRITETHROUGH is not set +# CONFIG_CPU_CACHE_ROUND_ROBIN is not set +CONFIG_ARM_GIC=y +CONFIG_ICST307=y + +# +# Bus support +# +CONFIG_ARM_AMBA=y +CONFIG_ISA_DMA_API=y + +# +# PCCARD (PCMCIA/CardBus) support +# +# CONFIG_PCCARD is not set + +# +# Kernel Features +# +# CONFIG_NO_IDLE_HZ is not set +# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set +CONFIG_FLATMEM=y +CONFIG_FLAT_NODE_MEM_MAP=y +# CONFIG_SPARSEMEM_STATIC is not set +CONFIG_ALIGNMENT_TRAP=y + +# +# Boot options +# +CONFIG_ZBOOT_ROM_TEXT=0x0 +CONFIG_ZBOOT_ROM_BSS=0x0 +CONFIG_CMDLINE="root=/dev/nfs nfsroot=10.1.69.3:/work/nfsroot ip=dhcp console=ttyAMA0 mem=128M" +# CONFIG_XIP_KERNEL is not set + +# +# Floating point emulation +# + +# +# At least one emulation must be selected +# +CONFIG_FPE_NWFPE=y +# CONFIG_FPE_NWFPE_XP is not set +# CONFIG_VFP is not set + +# +# Userspace binary formats +# +CONFIG_BINFMT_ELF=y +# CONFIG_BINFMT_AOUT is not set +# CONFIG_BINFMT_MISC is not set +# CONFIG_ARTHUR is not set + +# +# Power management options +# +# CONFIG_PM is not set + +# +# Networking +# +CONFIG_NET=y + +# +# Networking options +# +CONFIG_PACKET=y +# CONFIG_PACKET_MMAP is not set +CONFIG_UNIX=y +# CONFIG_NET_KEY is not set +CONFIG_INET=y +# CONFIG_IP_MULTICAST is not set +# CONFIG_IP_ADVANCED_ROUTER is not set +CONFIG_IP_FIB_HASH=y +CONFIG_IP_PNP=y +CONFIG_IP_PNP_DHCP=y +CONFIG_IP_PNP_BOOTP=y +# CONFIG_IP_PNP_RARP is not set +# CONFIG_NET_IPIP is not set +# CONFIG_NET_IPGRE is not set +# CONFIG_SYN_COOKIES is not set +# CONFIG_INET_AH is not set +# CONFIG_INET_ESP is not set +# CONFIG_INET_IPCOMP is not set +# CONFIG_INET_TUNNEL is not set +CONFIG_INET_DIAG=y +CONFIG_INET_TCP_DIAG=y +# CONFIG_TCP_CONG_ADVANCED is not set +CONFIG_TCP_CONG_BIC=y +# CONFIG_IPV6 is not set +# CONFIG_NETFILTER is not set +# CONFIG_BRIDGE is not set +# CONFIG_VLAN_8021Q is not set +# CONFIG_DECNET is not set +# CONFIG_LLC2 is not set +# CONFIG_IPX is not set +# CONFIG_ATALK is not set +# CONFIG_NET_SCHED is not set +# CONFIG_NET_CLS_ROUTE is not set + +# +# Network testing +# +# CONFIG_NET_PKTGEN is not set +# CONFIG_HAMRADIO is not set +# CONFIG_IRDA is not set +# CONFIG_BT is not set +# CONFIG_IEEE80211 is not set + +# +# Device Drivers +# + +# +# Generic Driver Options +# +CONFIG_STANDALONE=y +CONFIG_PREVENT_FIRMWARE_BUILD=y +# CONFIG_FW_LOADER is not set +# CONFIG_DEBUG_DRIVER is not set + +# +# Memory Technology Devices (MTD) +# +CONFIG_MTD=y +# CONFIG_MTD_DEBUG is not set +# CONFIG_MTD_CONCAT is not set +CONFIG_MTD_PARTITIONS=y +# CONFIG_MTD_REDBOOT_PARTS is not set +CONFIG_MTD_CMDLINE_PARTS=y +# CONFIG_MTD_AFS_PARTS is not set + +# +# User Modules And Translation Layers +# +CONFIG_MTD_CHAR=y +CONFIG_MTD_BLOCK=y +# CONFIG_FTL is not set +# CONFIG_NFTL is not set +# CONFIG_INFTL is not set + +# +# RAM/ROM/Flash chip drivers +# +CONFIG_MTD_CFI=y +# CONFIG_MTD_JEDECPROBE is not set +CONFIG_MTD_GEN_PROBE=y +# CONFIG_MTD_CFI_ADV_OPTIONS is not set +CONFIG_MTD_MAP_BANK_WIDTH_1=y +CONFIG_MTD_MAP_BANK_WIDTH_2=y +CONFIG_MTD_MAP_BANK_WIDTH_4=y +# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set +CONFIG_MTD_CFI_I1=y +CONFIG_MTD_CFI_I2=y +# CONFIG_MTD_CFI_I4 is not set +# CONFIG_MTD_CFI_I8 is not set +CONFIG_MTD_CFI_INTELEXT=y +CONFIG_MTD_CFI_AMDSTD=y +CONFIG_MTD_CFI_AMDSTD_RETRY=0 +# CONFIG_MTD_CFI_STAA is not set +CONFIG_MTD_CFI_UTIL=y +# CONFIG_MTD_RAM is not set +# CONFIG_MTD_ROM is not set +# CONFIG_MTD_ABSENT is not set + +# +# Mapping drivers for chip access +# +# CONFIG_MTD_COMPLEX_MAPPINGS is not set +# CONFIG_MTD_PHYSMAP is not set +CONFIG_MTD_ARM_INTEGRATOR=y +# CONFIG_MTD_EDB7312 is not set +# CONFIG_MTD_PLATRAM is not set + +# +# Self-contained MTD device drivers +# +# CONFIG_MTD_SLRAM is not set +# CONFIG_MTD_PHRAM is not set +# CONFIG_MTD_MTDRAM is not set +# CONFIG_MTD_BLKMTD is not set + +# +# Disk-On-Chip Device Drivers +# +# CONFIG_MTD_DOC2000 is not set +# CONFIG_MTD_DOC2001 is not set +# CONFIG_MTD_DOC2001PLUS is not set + +# +# NAND Flash Device Drivers +# +# CONFIG_MTD_NAND is not set + +# +# Parallel port support +# +# CONFIG_PARPORT is not set + +# +# Plug and Play support +# + +# +# Block devices +# +# CONFIG_BLK_DEV_COW_COMMON is not set +# CONFIG_BLK_DEV_LOOP is not set +# CONFIG_BLK_DEV_NBD is not set +# CONFIG_BLK_DEV_RAM is not set +CONFIG_BLK_DEV_RAM_COUNT=16 +# CONFIG_CDROM_PKTCDVD is not set + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +# CONFIG_IOSCHED_AS is not set +CONFIG_IOSCHED_DEADLINE=y +# CONFIG_IOSCHED_CFQ is not set +# CONFIG_ATA_OVER_ETH is not set + +# +# SCSI device support +# +# CONFIG_RAID_ATTRS is not set +# CONFIG_SCSI is not set + +# +# Multi-device support (RAID and LVM) +# +# CONFIG_MD is not set + +# +# Fusion MPT device support +# +# CONFIG_FUSION is not set + +# +# IEEE 1394 (FireWire) support +# + +# +# I2O device support +# + +# +# Network device support +# +CONFIG_NETDEVICES=y +# CONFIG_DUMMY is not set +# CONFIG_BONDING is not set +# CONFIG_EQUALIZER is not set +# CONFIG_TUN is not set + +# +# PHY device support +# +# CONFIG_PHYLIB is not set + +# +# Ethernet (10 or 100Mbit) +# +CONFIG_NET_ETHERNET=y +CONFIG_MII=y +CONFIG_SMC91X=y +# CONFIG_DM9000 is not set + +# +# Ethernet (1000 Mbit) +# + +# +# Ethernet (10000 Mbit) +# + +# +# Token Ring devices +# + +# +# Wireless LAN (non-hamradio) +# +# CONFIG_NET_RADIO is not set + +# +# Wan interfaces +# +# CONFIG_WAN is not set +# CONFIG_PPP is not set +# CONFIG_SLIP is not set +# CONFIG_NETPOLL is not set +# CONFIG_NET_POLL_CONTROLLER is not set + +# +# ISDN subsystem +# +# CONFIG_ISDN is not set + +# +# Input device support +# +CONFIG_INPUT=y + +# +# Userland interfaces +# +CONFIG_INPUT_MOUSEDEV=y +CONFIG_INPUT_MOUSEDEV_PSAUX=y +CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 +CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 +# CONFIG_INPUT_JOYDEV is not set +# CONFIG_INPUT_TSDEV is not set +# CONFIG_INPUT_EVDEV is not set +# CONFIG_INPUT_EVBUG is not set + +# +# Input Device Drivers +# +CONFIG_INPUT_KEYBOARD=y +CONFIG_KEYBOARD_ATKBD=y +# CONFIG_KEYBOARD_SUNKBD is not set +# CONFIG_KEYBOARD_LKKBD is not set +# CONFIG_KEYBOARD_XTKBD is not set +# CONFIG_KEYBOARD_NEWTON is not set +CONFIG_INPUT_MOUSE=y +CONFIG_MOUSE_PS2=y +# CONFIG_MOUSE_SERIAL is not set +# CONFIG_MOUSE_VSXXXAA is not set +# CONFIG_INPUT_JOYSTICK is not set +# CONFIG_INPUT_TOUCHSCREEN is not set +# CONFIG_INPUT_MISC is not set + +# +# Hardware I/O ports +# +CONFIG_SERIO=y +# CONFIG_SERIO_SERPORT is not set +CONFIG_SERIO_AMBAKMI=y +CONFIG_SERIO_LIBPS2=y +# CONFIG_SERIO_RAW is not set +# CONFIG_GAMEPORT is not set + +# +# Character devices +# +CONFIG_VT=y +CONFIG_VT_CONSOLE=y +CONFIG_HW_CONSOLE=y +# CONFIG_SERIAL_NONSTANDARD is not set + +# +# Serial drivers +# +# CONFIG_SERIAL_8250 is not set + +# +# Non-8250 serial port support +# +# CONFIG_SERIAL_AMBA_PL010 is not set +CONFIG_SERIAL_AMBA_PL011=y +CONFIG_SERIAL_AMBA_PL011_CONSOLE=y +CONFIG_SERIAL_CORE=y +CONFIG_SERIAL_CORE_CONSOLE=y +CONFIG_UNIX98_PTYS=y +CONFIG_LEGACY_PTYS=y +CONFIG_LEGACY_PTY_COUNT=16 + +# +# IPMI +# +# CONFIG_IPMI_HANDLER is not set + +# +# Watchdog Cards +# +# CONFIG_WATCHDOG is not set +# CONFIG_NVRAM is not set +# CONFIG_RTC is not set +# CONFIG_DTLK is not set +# CONFIG_R3964 is not set + +# +# Ftape, the floppy tape device driver +# +# CONFIG_RAW_DRIVER is not set + +# +# TPM devices +# + +# +# I2C support +# +# CONFIG_I2C is not set + +# +# Hardware Monitoring support +# +# CONFIG_HWMON is not set +# CONFIG_HWMON_VID is not set + +# +# Misc devices +# + +# +# Multimedia Capabilities Port drivers +# + +# +# Multimedia devices +# +# CONFIG_VIDEO_DEV is not set + +# +# Digital Video Broadcasting Devices +# +# CONFIG_DVB is not set + +# +# Graphics support +# +CONFIG_FB=y +CONFIG_FB_CFB_FILLRECT=y +CONFIG_FB_CFB_COPYAREA=y +CONFIG_FB_CFB_IMAGEBLIT=y +CONFIG_FB_SOFT_CURSOR=y +# CONFIG_FB_MACMODES is not set +# CONFIG_FB_MODE_HELPERS is not set +# CONFIG_FB_TILEBLITTING is not set +CONFIG_FB_ARMCLCD=y +# CONFIG_FB_S1D13XXX is not set +# CONFIG_FB_VIRTUAL is not set + +# +# Console display driver support +# +# CONFIG_VGA_CONSOLE is not set +CONFIG_DUMMY_CONSOLE=y +CONFIG_FRAMEBUFFER_CONSOLE=y +# CONFIG_FONTS is not set +CONFIG_FONT_8x8=y +CONFIG_FONT_8x16=y + +# +# Logo configuration +# +CONFIG_LOGO=y +# CONFIG_LOGO_LINUX_MONO is not set +# CONFIG_LOGO_LINUX_VGA16 is not set +CONFIG_LOGO_LINUX_CLUT224=y +# CONFIG_BACKLIGHT_LCD_SUPPORT is not set + +# +# Sound +# +CONFIG_SOUND=y + +# +# Advanced Linux Sound Architecture +# +CONFIG_SND=y +CONFIG_SND_TIMER=y +CONFIG_SND_PCM=y +# CONFIG_SND_SEQUENCER is not set +CONFIG_SND_OSSEMUL=y +CONFIG_SND_MIXER_OSS=y +CONFIG_SND_PCM_OSS=y +# CONFIG_SND_VERBOSE_PRINTK is not set +# CONFIG_SND_DEBUG is not set + +# +# Generic devices +# +# CONFIG_SND_DUMMY is not set +# CONFIG_SND_MTPAV is not set +# CONFIG_SND_SERIAL_U16550 is not set +# CONFIG_SND_MPU401 is not set + +# +# ALSA ARM devices +# +# CONFIG_SND_ARMAACI is not set + +# +# Open Sound System +# +# CONFIG_SOUND_PRIME is not set + +# +# USB support +# +CONFIG_USB_ARCH_HAS_HCD=y +# CONFIG_USB_ARCH_HAS_OHCI is not set +# CONFIG_USB is not set + +# +# USB Gadget Support +# +# CONFIG_USB_GADGET is not set + +# +# MMC/SD Card support +# +# CONFIG_MMC is not set + +# +# File systems +# +# CONFIG_EXT2_FS is not set +# CONFIG_EXT3_FS is not set +# CONFIG_JBD is not set +# CONFIG_REISERFS_FS is not set +# CONFIG_JFS_FS is not set +# CONFIG_FS_POSIX_ACL is not set +# CONFIG_XFS_FS is not set +# CONFIG_MINIX_FS is not set +# CONFIG_ROMFS_FS is not set +CONFIG_INOTIFY=y +# CONFIG_QUOTA is not set +CONFIG_DNOTIFY=y +# CONFIG_AUTOFS_FS is not set +# CONFIG_AUTOFS4_FS is not set +# CONFIG_FUSE_FS is not set + +# +# CD-ROM/DVD Filesystems +# +# CONFIG_ISO9660_FS is not set +# CONFIG_UDF_FS is not set + +# +# DOS/FAT/NT Filesystems +# +CONFIG_FAT_FS=y +# CONFIG_MSDOS_FS is not set +CONFIG_VFAT_FS=y +CONFIG_FAT_DEFAULT_CODEPAGE=437 +CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" +# CONFIG_NTFS_FS is not set + +# +# Pseudo filesystems +# +CONFIG_PROC_FS=y +CONFIG_SYSFS=y +CONFIG_TMPFS=y +# CONFIG_HUGETLB_PAGE is not set +CONFIG_RAMFS=y +# CONFIG_RELAYFS_FS is not set + +# +# Miscellaneous filesystems +# +# CONFIG_HFSPLUS_FS is not set +# CONFIG_JFFS_FS is not set +# CONFIG_JFFS2_FS is not set +CONFIG_CRAMFS=y +# CONFIG_VXFS_FS is not set +# CONFIG_HPFS_FS is not set +# CONFIG_QNX4FS_FS is not set +# CONFIG_SYSV_FS is not set +# CONFIG_UFS_FS is not set + +# +# Network File Systems +# +CONFIG_NFS_FS=y +CONFIG_NFS_V3=y +# CONFIG_NFS_V3_ACL is not set +# CONFIG_NFSD is not set +CONFIG_ROOT_NFS=y +CONFIG_LOCKD=y +CONFIG_LOCKD_V4=y +CONFIG_NFS_COMMON=y +CONFIG_SUNRPC=y +# CONFIG_SMB_FS is not set +# CONFIG_CIFS is not set +# CONFIG_NCP_FS is not set +# CONFIG_CODA_FS is not set + +# +# Partition Types +# +# CONFIG_PARTITION_ADVANCED is not set +CONFIG_MSDOS_PARTITION=y + +# +# Native Language Support +# +CONFIG_NLS=y +CONFIG_NLS_DEFAULT="iso8859-1" +CONFIG_NLS_CODEPAGE_437=y +# CONFIG_NLS_CODEPAGE_737 is not set +# CONFIG_NLS_CODEPAGE_775 is not set +# CONFIG_NLS_CODEPAGE_850 is not set +# CONFIG_NLS_CODEPAGE_852 is not set +# CONFIG_NLS_CODEPAGE_855 is not set +# CONFIG_NLS_CODEPAGE_857 is not set +# CONFIG_NLS_CODEPAGE_860 is not set +# CONFIG_NLS_CODEPAGE_861 is not set +# CONFIG_NLS_CODEPAGE_862 is not set +# CONFIG_NLS_CODEPAGE_863 is not set +# CONFIG_NLS_CODEPAGE_864 is not set +# CONFIG_NLS_CODEPAGE_865 is not set +# CONFIG_NLS_CODEPAGE_866 is not set +# CONFIG_NLS_CODEPAGE_869 is not set +# CONFIG_NLS_CODEPAGE_936 is not set +# CONFIG_NLS_CODEPAGE_950 is not set +# CONFIG_NLS_CODEPAGE_932 is not set +# CONFIG_NLS_CODEPAGE_949 is not set +# CONFIG_NLS_CODEPAGE_874 is not set +# CONFIG_NLS_ISO8859_8 is not set +# CONFIG_NLS_CODEPAGE_1250 is not set +# CONFIG_NLS_CODEPAGE_1251 is not set +# CONFIG_NLS_ASCII is not set +CONFIG_NLS_ISO8859_1=y +# CONFIG_NLS_ISO8859_2 is not set +# CONFIG_NLS_ISO8859_3 is not set +# CONFIG_NLS_ISO8859_4 is not set +# CONFIG_NLS_ISO8859_5 is not set +# CONFIG_NLS_ISO8859_6 is not set +# CONFIG_NLS_ISO8859_7 is not set +# CONFIG_NLS_ISO8859_9 is not set +# CONFIG_NLS_ISO8859_13 is not set +# CONFIG_NLS_ISO8859_14 is not set +# CONFIG_NLS_ISO8859_15 is not set +# CONFIG_NLS_KOI8_R is not set +# CONFIG_NLS_KOI8_U is not set +# CONFIG_NLS_UTF8 is not set + +# +# Kernel hacking +# +# CONFIG_PRINTK_TIME is not set +CONFIG_DEBUG_KERNEL=y +CONFIG_MAGIC_SYSRQ=y +CONFIG_LOG_BUF_SHIFT=14 +CONFIG_DETECT_SOFTLOCKUP=y +# CONFIG_SCHEDSTATS is not set +# CONFIG_DEBUG_SLAB is not set +# CONFIG_DEBUG_SPINLOCK is not set +# CONFIG_DEBUG_SPINLOCK_SLEEP is not set +# CONFIG_DEBUG_KOBJECT is not set +CONFIG_DEBUG_BUGVERBOSE=y +# CONFIG_DEBUG_INFO is not set +# CONFIG_DEBUG_FS is not set +CONFIG_FRAME_POINTER=y +CONFIG_DEBUG_USER=y +# CONFIG_DEBUG_WAITQ is not set +CONFIG_DEBUG_ERRORS=y +# CONFIG_DEBUG_LL is not set + +# +# Security options +# +# CONFIG_KEYS is not set +# CONFIG_SECURITY is not set + +# +# Cryptographic options +# +# CONFIG_CRYPTO is not set + +# +# Hardware crypto devices +# + +# +# Library routines +# +# CONFIG_CRC_CCITT is not set +# CONFIG_CRC16 is not set +CONFIG_CRC32=y +# CONFIG_LIBCRC32C is not set +CONFIG_ZLIB_INFLATE=y -- cgit v1.2.3 From 089311e117adb8ffe13984d122e33287ffa8c7ec Mon Sep 17 00:00:00 2001 From: Russell King Date: Thu, 3 Nov 2005 11:04:53 +0000 Subject: [ARM] Fix another build error with IOP3xx platforms ld doesn't like comments starting with // in its scripts Signed-off-by: Russell King --- include/asm-arm/arch-iop3xx/iop321.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/include/asm-arm/arch-iop3xx/iop321.h b/include/asm-arm/arch-iop3xx/iop321.h index 200621ff369..f8df778a356 100644 --- a/include/asm-arm/arch-iop3xx/iop321.h +++ b/include/asm-arm/arch-iop3xx/iop321.h @@ -40,7 +40,7 @@ #define IOP321_PCI_UPPER_IO_BA (IOP321_PCI_LOWER_IO_BA + IOP321_PCI_IO_WINDOW_SIZE - 1) #define IOP321_PCI_IO_OFFSET (IOP321_PCI_LOWER_IO_VA - IOP321_PCI_LOWER_IO_BA) -//#define IOP321_PCI_MEM_WINDOW_SIZE (~*IOP321_IALR1 + 1) +/* #define IOP321_PCI_MEM_WINDOW_SIZE (~*IOP321_IALR1 + 1) */ #define IOP321_PCI_MEM_WINDOW_SIZE 0x04000000 /* 64M outbound window */ #define IOP321_PCI_LOWER_MEM_PA 0x80000000 #define IOP321_PCI_LOWER_MEM_BA (*IOP321_OMWTVR0) -- cgit v1.2.3 From 4a5f79e7e65d24d2fa9eb6e6208672571704d337 Mon Sep 17 00:00:00 2001 From: Russell King Date: Thu, 3 Nov 2005 15:48:21 +0000 Subject: [ARM SMP] Add configuration option for ARMv6K processors The 'K' extension adds several new instructions to the ARMv6 ISA which are primerily useful for SMP. Signed-off-by: Russell King --- arch/arm/Makefile | 1 + arch/arm/lib/bitops.h | 2 +- arch/arm/mm/Kconfig | 12 ++++++++++++ 3 files changed, 14 insertions(+), 1 deletion(-) diff --git a/arch/arm/Makefile b/arch/arm/Makefile index d80749ae2a7..c422759438d 100644 --- a/arch/arm/Makefile +++ b/arch/arm/Makefile @@ -38,6 +38,7 @@ comma = , # macro, but instead defines a whole series of macros which makes # testing for a specific architecture or later rather impossible. arch-$(CONFIG_CPU_32v6) :=-D__LINUX_ARM_ARCH__=6 $(call cc-option,-march=armv6,-march=armv5t -Wa$(comma)-march=armv6) +arch-$(CONFIG_CPU_32v6K) :=-D__LINUX_ARM_ARCH__=6 $(call cc-option,-march=armv6k,-march=armv5t -Wa$(comma)-march=armv6k) arch-$(CONFIG_CPU_32v5) :=-D__LINUX_ARM_ARCH__=5 $(call cc-option,-march=armv5te,-march=armv4) arch-$(CONFIG_CPU_32v4) :=-D__LINUX_ARM_ARCH__=4 -march=armv4 arch-$(CONFIG_CPU_32v3) :=-D__LINUX_ARM_ARCH__=3 -march=armv3 diff --git a/arch/arm/lib/bitops.h b/arch/arm/lib/bitops.h index 64a988c1ad4..f35d91fbe11 100644 --- a/arch/arm/lib/bitops.h +++ b/arch/arm/lib/bitops.h @@ -1,6 +1,6 @@ #include -#if __LINUX_ARM_ARCH__ >= 6 && defined(CONFIG_CPU_MPCORE) +#if __LINUX_ARM_ARCH__ >= 6 && defined(CONFIG_CPU_32v6K) .macro bitop, instr mov r2, #1 and r3, r0, #7 @ Get bit offset diff --git a/arch/arm/mm/Kconfig b/arch/arm/mm/Kconfig index 5568403e984..e3c14d6b432 100644 --- a/arch/arm/mm/Kconfig +++ b/arch/arm/mm/Kconfig @@ -250,6 +250,18 @@ config CPU_V6 select CPU_COPY_V6 select CPU_TLB_V6 +# ARMv6k +config CPU_32v6K + bool "Support ARM V6K processor extensions" if !SMP + depends on CPU_V6 + default y if SMP + help + Say Y here if your ARMv6 processor supports the 'K' extension. + This enables the kernel to use some instructions not present + on previous processors, and as such a kernel build with this + enabled will not boot on processors with do not support these + instructions. + # Figure out what processor architecture version we should be using. # This defines the compiler instruction set which depends on the machine type. config CPU_32v3 -- cgit v1.2.3 From 7e5e6e9a509c4ed2973a345ec7ffb96577f42e26 Mon Sep 17 00:00:00 2001 From: Russell King Date: Thu, 3 Nov 2005 20:32:45 +0000 Subject: [ARM SMP] Do not clear cpu_vm_mask for VIPT caches Since we do not invalidate TLBs/caches on MM switches, we should not clear the cpu_vm_mask for the CPU. Signed-off-by: Russell King --- include/asm-arm/mmu_context.h | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/include/asm-arm/mmu_context.h b/include/asm-arm/mmu_context.h index 4af9c411c61..57b8def83d4 100644 --- a/include/asm-arm/mmu_context.h +++ b/include/asm-arm/mmu_context.h @@ -86,7 +86,8 @@ switch_mm(struct mm_struct *prev, struct mm_struct *next, cpu_set(cpu, next->cpu_vm_mask); check_context(next); cpu_switch_mm(next->pgd, next); - cpu_clear(cpu, prev->cpu_vm_mask); + if (cache_is_vivt()) + cpu_clear(cpu, prev->cpu_vm_mask); } } -- cgit v1.2.3 From 24bcc2f46cf8982dbc02c8e3037dfc5e12f1e35c Mon Sep 17 00:00:00 2001 From: Nicolas Pitre Date: Thu, 3 Nov 2005 20:40:50 +0000 Subject: [ARM] 3092/1: remove excessive print format padding Patch from Nicolas Pitre Using a llx format to print addresses that might possibly be (only) 36 bits wide make sense. However making it a zero padded 16 char wide field is a bit excessive and useless. Signed-off-by: Nicolas Pitre Signed-off-by: Russell King --- arch/arm/mm/mm-armv.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/arch/arm/mm/mm-armv.c b/arch/arm/mm/mm-armv.c index 1221fdde176..fb5b40289de 100644 --- a/arch/arm/mm/mm-armv.c +++ b/arch/arm/mm/mm-armv.c @@ -469,14 +469,14 @@ void __init create_mapping(struct map_desc *md) if (md->virtual != vectors_base() && md->virtual < TASK_SIZE) { printk(KERN_WARNING "BUG: not creating mapping for " - "0x%016llx at 0x%08lx in user region\n", + "0x%08llx at 0x%08lx in user region\n", __pfn_to_phys((u64)md->pfn), md->virtual); return; } if ((md->type == MT_DEVICE || md->type == MT_ROM) && md->virtual >= PAGE_OFFSET && md->virtual < VMALLOC_END) { - printk(KERN_WARNING "BUG: mapping for 0x%016llx at 0x%08lx " + printk(KERN_WARNING "BUG: mapping for 0x%08llx at 0x%08lx " "overlaps vmalloc space\n", __pfn_to_phys((u64)md->pfn), md->virtual); } @@ -492,14 +492,14 @@ void __init create_mapping(struct map_desc *md) if(md->pfn >= 0x100000) { if(domain) { printk(KERN_ERR "MM: invalid domain in supersection " - "mapping for 0x%016llx at 0x%08lx\n", + "mapping for 0x%08llx at 0x%08lx\n", __pfn_to_phys((u64)md->pfn), md->virtual); return; } if((md->virtual | md->length | __pfn_to_phys(md->pfn)) & ~SUPERSECTION_MASK) { printk(KERN_ERR "MM: cannot create mapping for " - "0x%016llx at 0x%08lx invalid alignment\n", + "0x%08llx at 0x%08lx invalid alignment\n", __pfn_to_phys((u64)md->pfn), md->virtual); return; } -- cgit v1.2.3 From 8b5f4f06eecc081892b05cd6077314d68872dfd6 Mon Sep 17 00:00:00 2001 From: Deepak Saxena Date: Thu, 3 Nov 2005 21:05:39 +0000 Subject: [ARM] Fix IXDP2x01 config files IXDP2401 config file has wrong baudrate and both boards have 3 UARTs. Signed-off-by: Deepak Saxena Signed-off-by: Russell King --- arch/arm/configs/ixdp2401_defconfig | 4 ++-- arch/arm/configs/ixdp2801_defconfig | 2 +- 2 files changed, 3 insertions(+), 3 deletions(-) diff --git a/arch/arm/configs/ixdp2401_defconfig b/arch/arm/configs/ixdp2401_defconfig index 38c9a721d5c..32bd552e098 100644 --- a/arch/arm/configs/ixdp2401_defconfig +++ b/arch/arm/configs/ixdp2401_defconfig @@ -152,7 +152,7 @@ CONFIG_ALIGNMENT_TRAP=y # CONFIG_ZBOOT_ROM_TEXT=0x0 CONFIG_ZBOOT_ROM_BSS=0x0 -CONFIG_CMDLINE="console=ttyS0,57600 root=/dev/nfs ip=bootp mem=64M@0x0 pci=firmware" +CONFIG_CMDLINE="console=ttyS0,115200 root=/dev/nfs ip=bootp mem=64M@0x0 pci=firmware" # CONFIG_XIP_KERNEL is not set # @@ -560,7 +560,7 @@ CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 # CONFIG_SERIAL_8250=y CONFIG_SERIAL_8250_CONSOLE=y -CONFIG_SERIAL_8250_NR_UARTS=2 +CONFIG_SERIAL_8250_NR_UARTS=3 # CONFIG_SERIAL_8250_EXTENDED is not set # diff --git a/arch/arm/configs/ixdp2801_defconfig b/arch/arm/configs/ixdp2801_defconfig index 12ef23d1c01..66ac0885df3 100644 --- a/arch/arm/configs/ixdp2801_defconfig +++ b/arch/arm/configs/ixdp2801_defconfig @@ -560,7 +560,7 @@ CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 # CONFIG_SERIAL_8250=y CONFIG_SERIAL_8250_CONSOLE=y -CONFIG_SERIAL_8250_NR_UARTS=2 +CONFIG_SERIAL_8250_NR_UARTS=3 # CONFIG_SERIAL_8250_EXTENDED is not set # -- cgit v1.2.3 From 73f0f7c79b046dc5d6b56a3f145430d97d50f877 Mon Sep 17 00:00:00 2001 From: Nicolas Pitre Date: Fri, 4 Nov 2005 17:15:43 +0000 Subject: [ARM] 3094/1: remove PLD stuff from old uaccess code Patch from Nicolas Pitre ARM processors that have pld instructions are not using those copy_user implementation anymore. Let's remove the useless PLD lines which were half wrong anyway. Signed-off-by: Nicolas Pitre Signed-off-by: Russell King --- arch/arm/lib/uaccess.S | 132 ++++++------------------------------------------- 1 file changed, 16 insertions(+), 116 deletions(-) diff --git a/arch/arm/lib/uaccess.S b/arch/arm/lib/uaccess.S index c28449157be..6f1b5b49fe4 100644 --- a/arch/arm/lib/uaccess.S +++ b/arch/arm/lib/uaccess.S @@ -43,8 +43,6 @@ ENTRY(__arch_copy_to_user) stmfd sp!, {r2, r4 - r7, lr} cmp r2, #4 blt .c2u_not_enough - PLD( pld [r1, #0] ) - PLD( pld [r0, #0] ) ands ip, r0, #3 bne .c2u_dest_not_aligned .c2u_dest_aligned: @@ -73,25 +71,13 @@ USER( strt r3, [r0], #4) @ May fault sub r2, r2, ip subs ip, ip, #32 blt .c2u_0rem8lp - PLD( pld [r1, #28] ) - PLD( pld [r0, #28] ) - PLD( subs ip, ip, #64 ) - PLD( blt .c2u_0cpynopld ) - PLD( pld [r1, #60] ) - PLD( pld [r0, #60] ) - -.c2u_0cpy8lp: - PLD( pld [r1, #92] ) - PLD( pld [r0, #92] ) -.c2u_0cpynopld: ldmia r1!, {r3 - r6} + +.c2u_0cpy8lp: ldmia r1!, {r3 - r6} stmia r0!, {r3 - r6} @ Shouldnt fault ldmia r1!, {r3 - r6} subs ip, ip, #32 stmia r0!, {r3 - r6} @ Shouldnt fault bpl .c2u_0cpy8lp - PLD( cmn ip, #64 ) - PLD( bge .c2u_0cpynopld ) - PLD( add ip, ip, #64 ) .c2u_0rem8lp: cmn ip, #16 ldmgeia r1!, {r3 - r6} @@ -143,17 +129,8 @@ USER( strt r3, [r0], #4) @ May fault sub r2, r2, ip subs ip, ip, #16 blt .c2u_1rem8lp - PLD( pld [r1, #12] ) - PLD( pld [r0, #12] ) - PLD( subs ip, ip, #32 ) - PLD( blt .c2u_1cpynopld ) - PLD( pld [r1, #28] ) - PLD( pld [r0, #28] ) - -.c2u_1cpy8lp: - PLD( pld [r1, #44] ) - PLD( pld [r0, #44] ) -.c2u_1cpynopld: mov r3, r7, pull #8 + +.c2u_1cpy8lp: mov r3, r7, pull #8 ldmia r1!, {r4 - r7} subs ip, ip, #16 orr r3, r3, r4, push #24 @@ -165,9 +142,6 @@ USER( strt r3, [r0], #4) @ May fault orr r6, r6, r7, push #24 stmia r0!, {r3 - r6} @ Shouldnt fault bpl .c2u_1cpy8lp - PLD( cmn ip, #32 ) - PLD( bge .c2u_1cpynopld ) - PLD( add ip, ip, #32 ) .c2u_1rem8lp: tst ip, #8 movne r3, r7, pull #8 @@ -210,17 +184,8 @@ USER( strt r3, [r0], #4) @ May fault sub r2, r2, ip subs ip, ip, #16 blt .c2u_2rem8lp - PLD( pld [r1, #12] ) - PLD( pld [r0, #12] ) - PLD( subs ip, ip, #32 ) - PLD( blt .c2u_2cpynopld ) - PLD( pld [r1, #28] ) - PLD( pld [r0, #28] ) - -.c2u_2cpy8lp: - PLD( pld [r1, #44] ) - PLD( pld [r0, #44] ) -.c2u_2cpynopld: mov r3, r7, pull #16 + +.c2u_2cpy8lp: mov r3, r7, pull #16 ldmia r1!, {r4 - r7} subs ip, ip, #16 orr r3, r3, r4, push #16 @@ -232,9 +197,6 @@ USER( strt r3, [r0], #4) @ May fault orr r6, r6, r7, push #16 stmia r0!, {r3 - r6} @ Shouldnt fault bpl .c2u_2cpy8lp - PLD( cmn ip, #32 ) - PLD( bge .c2u_2cpynopld ) - PLD( add ip, ip, #32 ) .c2u_2rem8lp: tst ip, #8 movne r3, r7, pull #16 @@ -277,17 +239,8 @@ USER( strt r3, [r0], #4) @ May fault sub r2, r2, ip subs ip, ip, #16 blt .c2u_3rem8lp - PLD( pld [r1, #12] ) - PLD( pld [r0, #12] ) - PLD( subs ip, ip, #32 ) - PLD( blt .c2u_3cpynopld ) - PLD( pld [r1, #28] ) - PLD( pld [r0, #28] ) - -.c2u_3cpy8lp: - PLD( pld [r1, #44] ) - PLD( pld [r0, #44] ) -.c2u_3cpynopld: mov r3, r7, pull #24 + +.c2u_3cpy8lp: mov r3, r7, pull #24 ldmia r1!, {r4 - r7} subs ip, ip, #16 orr r3, r3, r4, push #8 @@ -299,9 +252,6 @@ USER( strt r3, [r0], #4) @ May fault orr r6, r6, r7, push #8 stmia r0!, {r3 - r6} @ Shouldnt fault bpl .c2u_3cpy8lp - PLD( cmn ip, #32 ) - PLD( bge .c2u_3cpynopld ) - PLD( add ip, ip, #32 ) .c2u_3rem8lp: tst ip, #8 movne r3, r7, pull #24 @@ -356,8 +306,6 @@ ENTRY(__arch_copy_from_user) stmfd sp!, {r0, r2, r4 - r7, lr} cmp r2, #4 blt .cfu_not_enough - PLD( pld [r1, #0] ) - PLD( pld [r0, #0] ) ands ip, r0, #3 bne .cfu_dest_not_aligned .cfu_dest_aligned: @@ -385,25 +333,13 @@ USER( ldrt r3, [r1], #4) sub r2, r2, ip subs ip, ip, #32 blt .cfu_0rem8lp - PLD( pld [r1, #28] ) - PLD( pld [r0, #28] ) - PLD( subs ip, ip, #64 ) - PLD( blt .cfu_0cpynopld ) - PLD( pld [r1, #60] ) - PLD( pld [r0, #60] ) - -.cfu_0cpy8lp: - PLD( pld [r1, #92] ) - PLD( pld [r0, #92] ) -.cfu_0cpynopld: ldmia r1!, {r3 - r6} @ Shouldnt fault + +.cfu_0cpy8lp: ldmia r1!, {r3 - r6} @ Shouldnt fault stmia r0!, {r3 - r6} ldmia r1!, {r3 - r6} @ Shouldnt fault subs ip, ip, #32 stmia r0!, {r3 - r6} bpl .cfu_0cpy8lp - PLD( cmn ip, #64 ) - PLD( bge .cfu_0cpynopld ) - PLD( add ip, ip, #64 ) .cfu_0rem8lp: cmn ip, #16 ldmgeia r1!, {r3 - r6} @ Shouldnt fault @@ -456,17 +392,8 @@ USER( ldrt r7, [r1], #4) @ May fault sub r2, r2, ip subs ip, ip, #16 blt .cfu_1rem8lp - PLD( pld [r1, #12] ) - PLD( pld [r0, #12] ) - PLD( subs ip, ip, #32 ) - PLD( blt .cfu_1cpynopld ) - PLD( pld [r1, #28] ) - PLD( pld [r0, #28] ) - -.cfu_1cpy8lp: - PLD( pld [r1, #44] ) - PLD( pld [r0, #44] ) -.cfu_1cpynopld: mov r3, r7, pull #8 + +.cfu_1cpy8lp: mov r3, r7, pull #8 ldmia r1!, {r4 - r7} @ Shouldnt fault subs ip, ip, #16 orr r3, r3, r4, push #24 @@ -478,9 +405,6 @@ USER( ldrt r7, [r1], #4) @ May fault orr r6, r6, r7, push #24 stmia r0!, {r3 - r6} bpl .cfu_1cpy8lp - PLD( cmn ip, #32 ) - PLD( bge .cfu_1cpynopld ) - PLD( add ip, ip, #32 ) .cfu_1rem8lp: tst ip, #8 movne r3, r7, pull #8 @@ -523,17 +447,8 @@ USER( ldrt r7, [r1], #4) @ May fault sub r2, r2, ip subs ip, ip, #16 blt .cfu_2rem8lp - PLD( pld [r1, #12] ) - PLD( pld [r0, #12] ) - PLD( subs ip, ip, #32 ) - PLD( blt .cfu_2cpynopld ) - PLD( pld [r1, #28] ) - PLD( pld [r0, #28] ) - -.cfu_2cpy8lp: - PLD( pld [r1, #44] ) - PLD( pld [r0, #44] ) -.cfu_2cpynopld: mov r3, r7, pull #16 + +.cfu_2cpy8lp: mov r3, r7, pull #16 ldmia r1!, {r4 - r7} @ Shouldnt fault subs ip, ip, #16 orr r3, r3, r4, push #16 @@ -545,9 +460,6 @@ USER( ldrt r7, [r1], #4) @ May fault orr r6, r6, r7, push #16 stmia r0!, {r3 - r6} bpl .cfu_2cpy8lp - PLD( cmn ip, #32 ) - PLD( bge .cfu_2cpynopld ) - PLD( add ip, ip, #32 ) .cfu_2rem8lp: tst ip, #8 movne r3, r7, pull #16 @@ -590,17 +502,8 @@ USER( ldrt r7, [r1], #4) @ May fault sub r2, r2, ip subs ip, ip, #16 blt .cfu_3rem8lp - PLD( pld [r1, #12] ) - PLD( pld [r0, #12] ) - PLD( subs ip, ip, #32 ) - PLD( blt .cfu_3cpynopld ) - PLD( pld [r1, #28] ) - PLD( pld [r0, #28] ) - -.cfu_3cpy8lp: - PLD( pld [r1, #44] ) - PLD( pld [r0, #44] ) -.cfu_3cpynopld: mov r3, r7, pull #24 + +.cfu_3cpy8lp: mov r3, r7, pull #24 ldmia r1!, {r4 - r7} @ Shouldnt fault orr r3, r3, r4, push #8 mov r4, r4, pull #24 @@ -612,9 +515,6 @@ USER( ldrt r7, [r1], #4) @ May fault stmia r0!, {r3 - r6} subs ip, ip, #16 bpl .cfu_3cpy8lp - PLD( cmn ip, #32 ) - PLD( bge .cfu_3cpynopld ) - PLD( add ip, ip, #32 ) .cfu_3rem8lp: tst ip, #8 movne r3, r7, pull #24 -- cgit v1.2.3 From 7866f6492856dde7d70e4f878e3893e1f91216ce Mon Sep 17 00:00:00 2001 From: Dave Jiang Date: Fri, 4 Nov 2005 17:15:44 +0000 Subject: [ARM] 3086/1: ixp2xxx error irq handling Patch from Dave Jiang This provides support for IXP2xxx error interrupt handling. Previously there was a patch to remove this (although the original stuff was broken). Well, now the error bits are needed again. These are used extensively by the micro-engine drivers according to Deepak and also we will need it for the new EDAC code that Alan Cox is trying to push into the main kernel. Re-submit of 3072/1, generated against git tree pulled today. AFAICT, this git tree pulled in all the ARM changes that's in arm.diff. Please let me know if there are additional changes. Thx! Signed-off-by: Dave Jiang Signed-off-by: Deepak Saxena Signed-off-by: Russell King --- arch/arm/mach-ixp2000/core.c | 46 +++++++++++++++++++++++++++++++++++++ include/asm-arm/arch-ixp2000/irqs.h | 35 +++++++++++++++++++++++++++- 2 files changed, 80 insertions(+), 1 deletion(-) diff --git a/arch/arm/mach-ixp2000/core.c b/arch/arm/mach-ixp2000/core.c index c93a98b2a32..df140962bb0 100644 --- a/arch/arm/mach-ixp2000/core.c +++ b/arch/arm/mach-ixp2000/core.c @@ -402,6 +402,40 @@ static void ixp2000_pci_irq_unmask(unsigned int irq) ixp2000_reg_write(IXP2000_PCI_XSCALE_INT_ENABLE, (temp | (1 << 27))); } +/* + * Error interrupts. These are used extensively by the microengine drivers + */ +static void ixp2000_err_irq_handler(unsigned int irq, struct irqdesc *desc, struct pt_regs *regs) +{ + int i; + unsigned long status = *IXP2000_IRQ_ERR_STATUS; + + for(i = 31; i >= 0; i--) { + if(status & (1 << i)) { + desc = irq_desc + IRQ_IXP2000_DRAM0_MIN_ERR + i; + desc->handle(IRQ_IXP2000_DRAM0_MIN_ERR + i, desc, regs); + } + } +} + +static void ixp2000_err_irq_mask(unsigned int irq) +{ + ixp2000_reg_write(IXP2000_IRQ_ERR_ENABLE_CLR, + (1 << (irq - IRQ_IXP2000_DRAM0_MIN_ERR))); +} + +static void ixp2000_err_irq_unmask(unsigned int irq) +{ + ixp2000_reg_write(IXP2000_IRQ_ERR_ENABLE_SET, + (1 << (irq - IRQ_IXP2000_DRAM0_MIN_ERR))); +} + +static struct irqchip ixp2000_err_irq_chip = { + .ack = ixp2000_err_irq_mask, + .mask = ixp2000_err_irq_mask, + .unmask = ixp2000_err_irq_unmask +}; + static struct irqchip ixp2000_pci_irq_chip = { .ack = ixp2000_pci_irq_mask, .mask = ixp2000_pci_irq_mask, @@ -459,6 +493,18 @@ void __init ixp2000_init_irq(void) } else set_irq_flags(irq, 0); } + for (irq = IRQ_IXP2000_DRAM0_MIN_ERR; irq <= IRQ_IXP2000_SP_INT; irq++) { + if((1 << (irq - IRQ_IXP2000_DRAM0_MIN_ERR)) & + IXP2000_VALID_ERR_IRQ_MASK) { + set_irq_chip(irq, &ixp2000_err_irq_chip); + set_irq_handler(irq, do_level_IRQ); + set_irq_flags(irq, IRQF_VALID); + } + else + set_irq_flags(irq, 0); + } + set_irq_chained_handler(IRQ_IXP2000_ERRSUM, ixp2000_err_irq_handler); + /* * GPIO IRQs are invalid until someone sets the interrupt mode * by calling set_irq_type(). diff --git a/include/asm-arm/arch-ixp2000/irqs.h b/include/asm-arm/arch-ixp2000/irqs.h index 0deb96c12ad..62f09c7ff42 100644 --- a/include/asm-arm/arch-ixp2000/irqs.h +++ b/include/asm-arm/arch-ixp2000/irqs.h @@ -67,12 +67,45 @@ #define IRQ_IXP2000_PCIA 40 #define IRQ_IXP2000_PCIB 41 -#define NR_IXP2000_IRQS 42 +/* Int sources from IRQ_ERROR_STATUS */ +#define IRQ_IXP2000_DRAM0_MIN_ERR 42 +#define IRQ_IXP2000_DRAM0_MAJ_ERR 43 +#define IRQ_IXP2000_DRAM1_MIN_ERR 44 +#define IRQ_IXP2000_DRAM1_MAJ_ERR 45 +#define IRQ_IXP2000_DRAM2_MIN_ERR 46 +#define IRQ_IXP2000_DRAM2_MAJ_ERR 47 +/* 48-57 reserved */ +#define IRQ_IXP2000_SRAM0_ERR 58 +#define IRQ_IXP2000_SRAM1_ERR 59 +#define IRQ_IXP2000_SRAM2_ERR 60 +#define IRQ_IXP2000_SRAM3_ERR 61 +/* 62-65 reserved */ +#define IRQ_IXP2000_MEDIA_ERR 66 +#define IRQ_IXP2000_PCI_ERR 67 +#define IRQ_IXP2000_SP_INT 68 + +#define NR_IXP2000_IRQS 69 #define IXP2000_BOARD_IRQ(x) (NR_IXP2000_IRQS + (x)) #define IXP2000_BOARD_IRQ_MASK(irq) (1 << (irq - NR_IXP2000_IRQS)) +#define IXP2000_ERR_IRQ_MASK(irq) ( 1 << (irq - IRQ_IXP2000_DRAM0_MIN_ERR)) +#define IXP2000_VALID_ERR_IRQ_MASK (\ + IXP2000_ERR_IRQ_MASK(IRQ_IXP2000_DRAM0_MIN_ERR) | \ + IXP2000_ERR_IRQ_MASK(IRQ_IXP2000_DRAM0_MAJ_ERR) | \ + IXP2000_ERR_IRQ_MASK(IRQ_IXP2000_DRAM1_MIN_ERR) | \ + IXP2000_ERR_IRQ_MASK(IRQ_IXP2000_DRAM1_MAJ_ERR) | \ + IXP2000_ERR_IRQ_MASK(IRQ_IXP2000_DRAM2_MIN_ERR) | \ + IXP2000_ERR_IRQ_MASK(IRQ_IXP2000_DRAM2_MAJ_ERR) | \ + IXP2000_ERR_IRQ_MASK(IRQ_IXP2000_SRAM0_ERR) | \ + IXP2000_ERR_IRQ_MASK(IRQ_IXP2000_SRAM1_ERR) | \ + IXP2000_ERR_IRQ_MASK(IRQ_IXP2000_SRAM2_ERR) | \ + IXP2000_ERR_IRQ_MASK(IRQ_IXP2000_SRAM3_ERR) | \ + IXP2000_ERR_IRQ_MASK(IRQ_IXP2000_MEDIA_ERR) | \ + IXP2000_ERR_IRQ_MASK(IRQ_IXP2000_PCI_ERR) | \ + IXP2000_ERR_IRQ_MASK(IRQ_IXP2000_SP_INT) ) + /* * This allows for all the on-chip sources plus up to 32 CPLD based * IRQs. Should be more than enough. -- cgit v1.2.3 From 74ec71e16189717d3f33ec7e5d22021480f4173b Mon Sep 17 00:00:00 2001 From: Todd Poynor Date: Fri, 4 Nov 2005 17:15:45 +0000 Subject: [ARM] 3087/1: PXA2xx flash platform device conversion Patch from Todd Poynor Add platform devices for flash to Lubbock and Mainstone board files. Once in place, the two existing mtd map drivers for the boards will be converted to use a single pxa2xx map driver in the linux-mtd tree. Take 4: flash_platform_data .map_name vs. .name cleaned up, resync with merged irda patch context. Signed-off-by: Todd Poynor Signed-off-by: Russell King --- arch/arm/mach-pxa/lubbock.c | 80 ++++++++++++++++++++++++++++++++++++++ arch/arm/mach-pxa/mainstone.c | 90 ++++++++++++++++++++++++++++++++++++++++++- 2 files changed, 168 insertions(+), 2 deletions(-) diff --git a/arch/arm/mach-pxa/lubbock.c b/arch/arm/mach-pxa/lubbock.c index 9c6e77faec5..b464bc88ff9 100644 --- a/arch/arm/mach-pxa/lubbock.c +++ b/arch/arm/mach-pxa/lubbock.c @@ -19,16 +19,20 @@ #include #include #include +#include +#include #include #include #include #include #include +#include #include #include #include +#include #include @@ -199,10 +203,75 @@ static struct platform_device smc91x_device = { .resource = smc91x_resources, }; +static struct resource flash_resources[] = { + [0] = { + .start = 0x00000000, + .end = SZ_64M - 1, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = 0x04000000, + .end = 0x04000000 + SZ_64M - 1, + .flags = IORESOURCE_MEM, + }, +}; + +static struct mtd_partition lubbock_partitions[] = { + { + .name = "Bootloader", + .size = 0x00040000, + .offset = 0, + .mask_flags = MTD_WRITEABLE /* force read-only */ + },{ + .name = "Kernel", + .size = 0x00100000, + .offset = 0x00040000, + },{ + .name = "Filesystem", + .size = MTDPART_SIZ_FULL, + .offset = 0x00140000 + } +}; + +static struct flash_platform_data lubbock_flash_data[2] = { + { + .map_name = "cfi_probe", + .parts = lubbock_partitions, + .nr_parts = ARRAY_SIZE(lubbock_partitions), + }, { + .map_name = "cfi_probe", + .parts = NULL, + .nr_parts = 0, + } +}; + +static struct platform_device lubbock_flash_device[2] = { + { + .name = "pxa2xx-flash", + .id = 0, + .dev = { + .platform_data = &lubbock_flash_data[0], + }, + .resource = &flash_resources[0], + .num_resources = 1, + }, + { + .name = "pxa2xx-flash", + .id = 1, + .dev = { + .platform_data = &lubbock_flash_data[1], + }, + .resource = &flash_resources[1], + .num_resources = 1, + }, +}; + static struct platform_device *devices[] __initdata = { &sa1111_device, &lub_audio_device, &smc91x_device, + &lubbock_flash_device[0], + &lubbock_flash_device[1], }; static struct pxafb_mach_info sharp_lm8v31 __initdata = { @@ -315,10 +384,21 @@ static struct pxaficp_platform_data lubbock_ficp_platform_data = { static void __init lubbock_init(void) { + int flashboot = (LUB_CONF_SWITCHES & 1); + pxa_set_udc_info(&udc_info); set_pxa_fb_info(&sharp_lm8v31); pxa_set_mci_info(&lubbock_mci_platform_data); pxa_set_ficp_info(&lubbock_ficp_platform_data); + + lubbock_flash_data[0].width = lubbock_flash_data[1].width = + (BOOT_DEF & 1) ? 2 : 4; + /* Compensate for the nROMBT switch which swaps the flash banks */ + printk(KERN_NOTICE "Lubbock configured to boot from %s (bank %d)\n", + flashboot?"Flash":"ROM", flashboot); + + lubbock_flash_data[flashboot^1].name = "application-flash"; + lubbock_flash_data[flashboot].name = "boot-rom"; (void) platform_add_devices(devices, ARRAY_SIZE(devices)); } diff --git a/arch/arm/mach-pxa/mainstone.c b/arch/arm/mach-pxa/mainstone.c index 887a8cb7b72..07892f4012d 100644 --- a/arch/arm/mach-pxa/mainstone.c +++ b/arch/arm/mach-pxa/mainstone.c @@ -20,6 +20,9 @@ #include #include #include +#include +#include +#include #include #include @@ -27,10 +30,12 @@ #include #include #include +#include #include #include #include +#include #include #include @@ -190,6 +195,69 @@ static struct platform_device mst_audio_device = { .dev = { .platform_data = &mst_audio_ops }, }; +static struct resource flash_resources[] = { + [0] = { + .start = PXA_CS0_PHYS, + .end = PXA_CS0_PHYS + SZ_64M - 1, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = PXA_CS1_PHYS, + .end = PXA_CS1_PHYS + SZ_64M - 1, + .flags = IORESOURCE_MEM, + }, +}; + +static struct mtd_partition mainstoneflash0_partitions[] = { + { + .name = "Bootloader", + .size = 0x00040000, + .offset = 0, + .mask_flags = MTD_WRITEABLE /* force read-only */ + },{ + .name = "Kernel", + .size = 0x00400000, + .offset = 0x00040000, + },{ + .name = "Filesystem", + .size = MTDPART_SIZ_FULL, + .offset = 0x00440000 + } +}; + +static struct flash_platform_data mst_flash_data[2] = { + { + .map_name = "cfi_probe", + .parts = mainstoneflash0_partitions, + .nr_parts = ARRAY_SIZE(mainstoneflash0_partitions), + }, { + .map_name = "cfi_probe", + .parts = NULL, + .nr_parts = 0, + } +}; + +static struct platform_device mst_flash_device[2] = { + { + .name = "pxa2xx-flash", + .id = 0, + .dev = { + .platform_data = &mst_flash_data[0], + }, + .resource = &flash_resources[0], + .num_resources = 1, + }, + { + .name = "pxa2xx-flash", + .id = 1, + .dev = { + .platform_data = &mst_flash_data[1], + }, + .resource = &flash_resources[1], + .num_resources = 1, + }, +}; + static void mainstone_backlight_power(int on) { if (on) { @@ -318,16 +386,34 @@ static struct pxaficp_platform_data mainstone_ficp_platform_data = { .transceiver_mode = mainstone_irda_transceiver_mode, }; +static struct platform_device *platform_devices[] __initdata = { + &smc91x_device, + &mst_audio_device, + &mst_flash_device[0], + &mst_flash_device[1], +}; + static void __init mainstone_init(void) { + int SW7 = 0; /* FIXME: get from SCR (Mst doc section 3.2.1.1) */ + + mst_flash_data[0].width = (BOOT_DEF & 1) ? 2 : 4; + mst_flash_data[1].width = 4; + + /* Compensate for SW7 which swaps the flash banks */ + mst_flash_data[SW7].name = "processor-flash"; + mst_flash_data[SW7 ^ 1].name = "mainboard-flash"; + + printk(KERN_NOTICE "Mainstone configured to boot from %s\n", + mst_flash_data[0].name); + /* * On Mainstone, we route AC97_SYSCLK via GPIO45 to * the audio daughter card */ pxa_gpio_mode(GPIO45_SYSCLK_AC97_MD); - platform_device_register(&smc91x_device); - platform_device_register(&mst_audio_device); + platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices)); /* reading Mainstone's "Virtual Configuration Register" might be handy to select LCD type here */ -- cgit v1.2.3 From 30c2f90b68b9bcdba83d386d56533d3e884be021 Mon Sep 17 00:00:00 2001 From: Nicolas Pitre Date: Fri, 4 Nov 2005 17:17:30 +0000 Subject: [ARM] 3097/1: change library link ordering Patch from Nicolas Pitre We have an optimized sha1 routine (arch/arm/lib/sha1.S) meant to override the generic one in lib/sha1.c. Unfortunately lib/lib.a is listed _before_ arch/arm/lib/lib.a in the link argument list and therefore the architecture specific lib functions are not picked up before the generic versions. This patch is a quick fix to change that ordering for ARM. Here's what the kbuild maintainer had to say about it (was also CC'd on lkml): On Wed, 2 Nov 2005, Sam Ravnborg wrote: > This looks like an obvious way to achive correct ordering. > We could change it so arch defines always took precedence but > the above is so simple that it is not worth the effort. Signed-off-by: Nicolas Pitre Signed-off-by: Russell King --- arch/arm/Makefile | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm/Makefile b/arch/arm/Makefile index c422759438d..114cda7f1b7 100644 --- a/arch/arm/Makefile +++ b/arch/arm/Makefile @@ -144,7 +144,7 @@ drivers-$(CONFIG_OPROFILE) += arch/arm/oprofile/ drivers-$(CONFIG_ARCH_CLPS7500) += drivers/acorn/char/ drivers-$(CONFIG_ARCH_L7200) += drivers/acorn/char/ -libs-y += arch/arm/lib/ +libs-y := arch/arm/lib/ $(libs-y) # Default target when executing plain make ifeq ($(CONFIG_XIP_KERNEL),y) -- cgit v1.2.3 From e399822da0f99f8486c33c47e7ae0d32151461e5 Mon Sep 17 00:00:00 2001 From: Russell King Date: Fri, 4 Nov 2005 17:26:56 +0000 Subject: [PATCH] ARM: Reverted 2919/1: CS8900A ethernet driver modifications for the Comdial MP1000 No longer maintained --- drivers/net/Kconfig | 2 +- drivers/net/cs89x0.c | 14 +------------- drivers/net/cs89x0.h | 2 +- 3 files changed, 3 insertions(+), 15 deletions(-) diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig index 6d4f9ceb0a3..57edae4790e 100644 --- a/drivers/net/Kconfig +++ b/drivers/net/Kconfig @@ -1374,7 +1374,7 @@ config FORCEDETH config CS89x0 tristate "CS89x0 support" - depends on (NET_PCI && (ISA || ARCH_IXDP2X01)) || ARCH_PNX0105 || MACH_MP1000 + depends on (NET_PCI && (ISA || ARCH_IXDP2X01)) || ARCH_PNX0105 ---help--- Support for CS89x0 chipset based Ethernet cards. If you have a network (Ethernet) card of this type, say Y and read the diff --git a/drivers/net/cs89x0.c b/drivers/net/cs89x0.c index bfdae10036e..a6078ad9b65 100644 --- a/drivers/net/cs89x0.c +++ b/drivers/net/cs89x0.c @@ -182,10 +182,6 @@ static unsigned int cs8900_irq_map[] = {IRQ_IXDP2X01_CS8900, 0, 0, 0}; #define CIRRUS_DEFAULT_IRQ VH_INTC_INT_NUM_CASCADED_INTERRUPT_1 /* Event inputs bank 1 - ID 35/bit 3 */ static unsigned int netcard_portlist[] __initdata = {CIRRUS_DEFAULT_BASE, 0}; static unsigned int cs8900_irq_map[] = {CIRRUS_DEFAULT_IRQ, 0, 0, 0}; -#elif defined(CONFIG_MACH_MP1000) -#include -static unsigned int netcard_portlist[] __initdata = {MP1000_EIO_BASE+0x300, 0}; -static unsigned int cs8900_irq_map[] = {IRQ_EINT3,0,0,0}; #else static unsigned int netcard_portlist[] __initdata = { 0x300, 0x320, 0x340, 0x360, 0x200, 0x220, 0x240, 0x260, 0x280, 0x2a0, 0x2c0, 0x2e0, 0}; @@ -594,10 +590,6 @@ cs89x0_probe1(struct net_device *dev, int ioaddr, int modular) cnt -= j; } } else -#elif defined(CONFIG_MACH_MP1000) - if (1) { - memcpy(dev->dev_addr, get_eeprom_mac_address(), ETH_ALEN); - } else #endif if ((readreg(dev, PP_SelfST) & (EEPROM_OK | EEPROM_PRESENT)) == @@ -657,10 +649,6 @@ cs89x0_probe1(struct net_device *dev, int ioaddr, int modular) if (1) { printk(KERN_NOTICE "cs89x0: No EEPROM on HiCO.SH4\n"); } else -#elif defined(CONFIG_MACH_MP1000) - if (1) { - lp->force |= FORCE_RJ45; - } else #endif if ((readreg(dev, PP_SelfST) & EEPROM_PRESENT) == 0) printk(KERN_WARNING "cs89x0: No EEPROM, relying on command line....\n"); @@ -1243,7 +1231,7 @@ net_open(struct net_device *dev) else #endif { -#if !defined(CONFIG_ARCH_IXDP2X01) && !defined(CONFIG_ARCH_PNX0105) && !defined(CONFIG_MACH_MP1000) +#if !defined(CONFIG_ARCH_IXDP2X01) && !defined(CONFIG_ARCH_PNX0105) if (((1 << dev->irq) & lp->irq_map) == 0) { printk(KERN_ERR "%s: IRQ %d is not in our map of allowable IRQs, which is %x\n", dev->name, dev->irq, lp->irq_map); diff --git a/drivers/net/cs89x0.h b/drivers/net/cs89x0.h index f19d1ebe018..decea264f12 100644 --- a/drivers/net/cs89x0.h +++ b/drivers/net/cs89x0.h @@ -16,7 +16,7 @@ #include -#if defined(CONFIG_ARCH_IXDP2X01) || defined(CONFIG_ARCH_PNX0105) || defined (CONFIG_MACH_MP1000) +#if defined(CONFIG_ARCH_IXDP2X01) || defined(CONFIG_ARCH_PNX0105) /* IXDP2401/IXDP2801 uses dword-aligned register addressing */ #define CS89x0_PORT(reg) ((reg) * 2) #else -- cgit v1.2.3 From 866237eafc60637a2c9875167486f61d86892c6b Mon Sep 17 00:00:00 2001 From: Russell King Date: Fri, 4 Nov 2005 17:26:57 +0000 Subject: [PATCH] ARM: Reverted 2921/1: Support for the RTC / nvram on the Comdial MP1000 No longer maintained --- drivers/char/nvram.c | 110 +-------------------------------------------------- 1 file changed, 1 insertion(+), 109 deletions(-) diff --git a/drivers/char/nvram.c b/drivers/char/nvram.c index 9e24bbd4090..1af733d0732 100644 --- a/drivers/char/nvram.c +++ b/drivers/char/nvram.c @@ -32,11 +32,9 @@ * added changelog * 1.2 Erik Gilling: Cobalt Networks support * Tim Hockin: general cleanup, Cobalt support - * 1.3 Jon Ringle: Comdial MP1000 support - * */ -#define NVRAM_VERSION "1.3" +#define NVRAM_VERSION "1.2" #include #include @@ -47,7 +45,6 @@ #define PC 1 #define ATARI 2 #define COBALT 3 -#define MP1000 4 /* select machine configuration */ #if defined(CONFIG_ATARI) @@ -57,9 +54,6 @@ # if defined(CONFIG_COBALT) # include # define MACH COBALT -# elif defined(CONFIG_MACH_MP1000) -# undef MACH -# define MACH MP1000 # else # define MACH PC # endif @@ -118,23 +112,6 @@ #endif -#if MACH == MP1000 - -/* RTC in a MP1000 */ -#define CHECK_DRIVER_INIT() 1 - -#define MP1000_CKS_RANGE_START 0 -#define MP1000_CKS_RANGE_END 111 -#define MP1000_CKS_LOC 112 - -#define NVRAM_BYTES (128-NVRAM_FIRST_BYTE) - -#define mach_check_checksum mp1000_check_checksum -#define mach_set_checksum mp1000_set_checksum -#define mach_proc_infos mp1000_proc_infos - -#endif - /* Note that *all* calls to CMOS_READ and CMOS_WRITE must be done with * rtc_lock held. Due to the index-port/data-port design of the RTC, we * don't want two different things trying to get to it at once. (e.g. the @@ -938,91 +915,6 @@ atari_proc_infos(unsigned char *nvram, char *buffer, int *len, #endif /* MACH == ATARI */ -#if MACH == MP1000 - -static int -mp1000_check_checksum(void) -{ - int i; - unsigned short sum = 0; - unsigned short expect; - - for (i = MP1000_CKS_RANGE_START; i <= MP1000_CKS_RANGE_END; ++i) - sum += __nvram_read_byte(i); - - expect = __nvram_read_byte(MP1000_CKS_LOC+1)<<8 | - __nvram_read_byte(MP1000_CKS_LOC); - return ((sum & 0xffff) == expect); -} - -static void -mp1000_set_checksum(void) -{ - int i; - unsigned short sum = 0; - - for (i = MP1000_CKS_RANGE_START; i <= MP1000_CKS_RANGE_END; ++i) - sum += __nvram_read_byte(i); - __nvram_write_byte(sum >> 8, MP1000_CKS_LOC + 1); - __nvram_write_byte(sum & 0xff, MP1000_CKS_LOC); -} - -#ifdef CONFIG_PROC_FS - -#define SERVER_N_LEN 32 -#define PATH_N_LEN 32 -#define FILE_N_LEN 32 -#define NVRAM_MAGIC_SIG 0xdead - -typedef struct NvRamImage -{ - unsigned short int magic; - unsigned short int mode; - char fname[FILE_N_LEN]; - char path[PATH_N_LEN]; - char server[SERVER_N_LEN]; - char pad[12]; -} NvRam; - -static int -mp1000_proc_infos(unsigned char *nvram, char *buffer, int *len, - off_t *begin, off_t offset, int size) -{ - int checksum; - NvRam* nv = (NvRam*)nvram; - - spin_lock_irq(&rtc_lock); - checksum = __nvram_check_checksum(); - spin_unlock_irq(&rtc_lock); - - PRINT_PROC("Checksum status: %svalid\n", checksum ? "" : "not "); - - switch( nv->mode ) - { - case 0 : - PRINT_PROC( "\tMode 0, tftp prompt\n" ); - break; - case 1 : - PRINT_PROC( "\tMode 1, booting from disk\n" ); - break; - case 2 : - PRINT_PROC( "\tMode 2, Alternate boot from disk /boot/%s\n", nv->fname ); - break; - case 3 : - PRINT_PROC( "\tMode 3, Booting from net:\n" ); - PRINT_PROC( "\t\t%s:%s%s\n",nv->server, nv->path, nv->fname ); - break; - default: - PRINT_PROC( "\tInconsistant nvram?\n" ); - break; - } - - return 1; -} -#endif - -#endif /* MACH == MP1000 */ - MODULE_LICENSE("GPL"); EXPORT_SYMBOL(__nvram_read_byte); -- cgit v1.2.3 From d56c524afaa87ae224b5821ef101891ce076c321 Mon Sep 17 00:00:00 2001 From: Russell King Date: Fri, 4 Nov 2005 17:28:34 +0000 Subject: [PATCH] ARM: Reverted 2918/1: [update] Base port of Comdial MP1000 platfrom No longer maintained --- arch/arm/Kconfig | 3 +- arch/arm/boot/compressed/head.S | 3 +- arch/arm/configs/mp1000_defconfig | 897 -------------------------- arch/arm/mach-clps711x/Kconfig | 11 - arch/arm/mach-clps711x/Makefile | 1 - arch/arm/mach-clps711x/mp1000-mach.c | 49 -- arch/arm/mach-clps711x/mp1000-mm.c | 47 -- arch/arm/mach-clps711x/mp1000-seprom.c | 195 ------ drivers/serial/clps711x.c | 9 - include/asm-arm/arch-clps711x/hardware.h | 117 ---- include/asm-arm/arch-clps711x/mp1000-seprom.h | 77 --- 11 files changed, 2 insertions(+), 1407 deletions(-) delete mode 100644 arch/arm/configs/mp1000_defconfig delete mode 100644 arch/arm/mach-clps711x/mp1000-mach.c delete mode 100644 arch/arm/mach-clps711x/mp1000-mm.c delete mode 100644 arch/arm/mach-clps711x/mp1000-seprom.c delete mode 100644 include/asm-arm/arch-clps711x/mp1000-seprom.h diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index 6b12d71978d..296bc03d1cf 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -704,8 +704,7 @@ source "drivers/acorn/block/Kconfig" if PCMCIA || ARCH_CLPS7500 || ARCH_IOP3XX || ARCH_IXP4XX \ || ARCH_L7200 || ARCH_LH7A40X || ARCH_PXA || ARCH_RPC \ - || ARCH_S3C2410 || ARCH_SA1100 || ARCH_SHARK || FOOTBRIDGE \ - || MACH_MP1000 + || ARCH_S3C2410 || ARCH_SA1100 || ARCH_SHARK || FOOTBRIDGE source "drivers/ide/Kconfig" endif diff --git a/arch/arm/boot/compressed/head.S b/arch/arm/boot/compressed/head.S index a54d2eb6489..7c7f475e213 100644 --- a/arch/arm/boot/compressed/head.S +++ b/arch/arm/boot/compressed/head.S @@ -39,8 +39,7 @@ defined(CONFIG_ARCH_IXP4XX) || \ defined(CONFIG_ARCH_IXP2000) || \ defined(CONFIG_ARCH_LH7A40X) || \ - defined(CONFIG_ARCH_OMAP) || \ - defined(CONFIG_MACH_MP1000) + defined(CONFIG_ARCH_OMAP) .macro loadsp, rb addruart \rb .endm diff --git a/arch/arm/configs/mp1000_defconfig b/arch/arm/configs/mp1000_defconfig deleted file mode 100644 index d2cbc6fada1..00000000000 --- a/arch/arm/configs/mp1000_defconfig +++ /dev/null @@ -1,897 +0,0 @@ -# -# Automatically generated make config: don't edit -# Linux kernel version: 2.6.14-rc1 -# Fri Sep 16 15:48:13 2005 -# -CONFIG_ARM=y -CONFIG_MMU=y -CONFIG_UID16=y -CONFIG_RWSEM_GENERIC_SPINLOCK=y -CONFIG_GENERIC_CALIBRATE_DELAY=y - -# -# Code maturity level options -# -CONFIG_EXPERIMENTAL=y -# CONFIG_CLEAN_COMPILE is not set -CONFIG_BROKEN=y -CONFIG_BROKEN_ON_SMP=y -CONFIG_LOCK_KERNEL=y -CONFIG_INIT_ENV_ARG_LIMIT=32 - -# -# General setup -# -CONFIG_LOCALVERSION="" -CONFIG_LOCALVERSION_AUTO=y -CONFIG_SWAP=y -CONFIG_SYSVIPC=y -# CONFIG_POSIX_MQUEUE is not set -# CONFIG_BSD_PROCESS_ACCT is not set -CONFIG_SYSCTL=y -# CONFIG_AUDIT is not set -# CONFIG_HOTPLUG is not set -CONFIG_KOBJECT_UEVENT=y -CONFIG_IKCONFIG=y -CONFIG_IKCONFIG_PROC=y -CONFIG_INITRAMFS_SOURCE="" -CONFIG_EMBEDDED=y -CONFIG_KALLSYMS=y -# CONFIG_KALLSYMS_ALL is not set -# CONFIG_KALLSYMS_EXTRA_PASS is not set -CONFIG_PRINTK=y -CONFIG_BUG=y -CONFIG_BASE_FULL=y -CONFIG_FUTEX=y -CONFIG_EPOLL=y -CONFIG_CC_OPTIMIZE_FOR_SIZE=y -CONFIG_SHMEM=y -CONFIG_CC_ALIGN_FUNCTIONS=0 -CONFIG_CC_ALIGN_LABELS=0 -CONFIG_CC_ALIGN_LOOPS=0 -CONFIG_CC_ALIGN_JUMPS=0 -# CONFIG_TINY_SHMEM is not set -CONFIG_BASE_SMALL=0 - -# -# Loadable module support -# -CONFIG_MODULES=y -CONFIG_MODULE_UNLOAD=y -# CONFIG_MODULE_FORCE_UNLOAD is not set -CONFIG_OBSOLETE_MODPARM=y -# CONFIG_MODVERSIONS is not set -# CONFIG_MODULE_SRCVERSION_ALL is not set -CONFIG_KMOD=y - -# -# System Type -# -# CONFIG_ARCH_CLPS7500 is not set -CONFIG_ARCH_CLPS711X=y -# CONFIG_ARCH_CO285 is not set -# CONFIG_ARCH_EBSA110 is not set -# CONFIG_ARCH_CAMELOT is not set -# CONFIG_ARCH_FOOTBRIDGE is not set -# CONFIG_ARCH_INTEGRATOR is not set -# CONFIG_ARCH_IOP3XX is not set -# CONFIG_ARCH_IXP4XX is not set -# CONFIG_ARCH_IXP2000 is not set -# CONFIG_ARCH_L7200 is not set -# CONFIG_ARCH_PXA is not set -# CONFIG_ARCH_RPC is not set -# CONFIG_ARCH_SA1100 is not set -# CONFIG_ARCH_S3C2410 is not set -# CONFIG_ARCH_SHARK is not set -# CONFIG_ARCH_LH7A40X is not set -# CONFIG_ARCH_OMAP is not set -# CONFIG_ARCH_VERSATILE is not set -# CONFIG_ARCH_IMX is not set -# CONFIG_ARCH_H720X is not set -# CONFIG_ARCH_AAEC2000 is not set - -# -# CLPS711X/EP721X Implementations -# -# CONFIG_ARCH_AUTCPU12 is not set -# CONFIG_ARCH_CDB89712 is not set -# CONFIG_ARCH_CEIVA is not set -# CONFIG_ARCH_CLEP7312 is not set -# CONFIG_ARCH_EDB7211 is not set -# CONFIG_ARCH_P720T is not set -# CONFIG_ARCH_FORTUNET is not set -CONFIG_MACH_MP1000=y -CONFIG_MP1000_90MHZ=y - -# -# Processor Type -# -CONFIG_CPU_32=y -CONFIG_CPU_ARM720T=y -CONFIG_CPU_32v4=y -CONFIG_CPU_ABRT_LV4T=y -CONFIG_CPU_CACHE_V4=y -CONFIG_CPU_CACHE_VIVT=y -CONFIG_CPU_COPY_V4WT=y -CONFIG_CPU_TLB_V4WT=y - -# -# Processor Features -# -CONFIG_ARM_THUMB=y - -# -# Bus support -# -CONFIG_ISA_DMA_API=y - -# -# PCCARD (PCMCIA/CardBus) support -# -# CONFIG_PCCARD is not set - -# -# Kernel Features -# -# CONFIG_SMP is not set -CONFIG_PREEMPT=y -# CONFIG_NO_IDLE_HZ is not set -# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set -CONFIG_SELECT_MEMORY_MODEL=y -CONFIG_FLATMEM_MANUAL=y -# CONFIG_DISCONTIGMEM_MANUAL is not set -# CONFIG_SPARSEMEM_MANUAL is not set -CONFIG_FLATMEM=y -CONFIG_FLAT_NODE_MEM_MAP=y -# CONFIG_SPARSEMEM_STATIC is not set -CONFIG_ALIGNMENT_TRAP=y - -# -# Boot options -# -CONFIG_ZBOOT_ROM_TEXT=0x0 -CONFIG_ZBOOT_ROM_BSS=0x0 -CONFIG_CMDLINE="console=ttyCL,38400 root=/dev/discs/disc0/part1 ip=any cs89x0_media=rj45" -# CONFIG_XIP_KERNEL is not set - -# -# Floating point emulation -# - -# -# At least one emulation must be selected -# -CONFIG_FPE_NWFPE=y -# CONFIG_FPE_NWFPE_XP is not set -# CONFIG_FPE_FASTFPE is not set - -# -# Userspace binary formats -# -CONFIG_BINFMT_ELF=y -# CONFIG_BINFMT_AOUT is not set -CONFIG_BINFMT_MISC=y -# CONFIG_ARTHUR is not set - -# -# Power management options -# -# CONFIG_PM is not set - -# -# Networking -# -CONFIG_NET=y - -# -# Networking options -# -CONFIG_PACKET=y -# CONFIG_PACKET_MMAP is not set -CONFIG_UNIX=y -# CONFIG_NET_KEY is not set -CONFIG_INET=y -# CONFIG_IP_MULTICAST is not set -# CONFIG_IP_ADVANCED_ROUTER is not set -CONFIG_IP_FIB_HASH=y -CONFIG_IP_PNP=y -CONFIG_IP_PNP_DHCP=y -CONFIG_IP_PNP_BOOTP=y -CONFIG_IP_PNP_RARP=y -# CONFIG_NET_IPIP is not set -# CONFIG_NET_IPGRE is not set -# CONFIG_ARPD is not set -# CONFIG_SYN_COOKIES is not set -# CONFIG_INET_AH is not set -# CONFIG_INET_ESP is not set -# CONFIG_INET_IPCOMP is not set -# CONFIG_INET_TUNNEL is not set -CONFIG_INET_DIAG=y -CONFIG_INET_TCP_DIAG=y -# CONFIG_TCP_CONG_ADVANCED is not set -CONFIG_TCP_CONG_BIC=y -CONFIG_IPV6=y -# CONFIG_IPV6_PRIVACY is not set -# CONFIG_INET6_AH is not set -# CONFIG_INET6_ESP is not set -# CONFIG_INET6_IPCOMP is not set -# CONFIG_INET6_TUNNEL is not set -# CONFIG_IPV6_TUNNEL is not set -# CONFIG_NETFILTER is not set - -# -# DCCP Configuration (EXPERIMENTAL) -# -# CONFIG_IP_DCCP is not set - -# -# SCTP Configuration (EXPERIMENTAL) -# -# CONFIG_IP_SCTP is not set -# CONFIG_ATM is not set -# CONFIG_BRIDGE is not set -# CONFIG_VLAN_8021Q is not set -# CONFIG_DECNET is not set -# CONFIG_LLC2 is not set -# CONFIG_IPX is not set -# CONFIG_ATALK is not set -# CONFIG_X25 is not set -# CONFIG_LAPB is not set -# CONFIG_NET_DIVERT is not set -# CONFIG_ECONET is not set -# CONFIG_WAN_ROUTER is not set -# CONFIG_NET_SCHED is not set -# CONFIG_NET_CLS_ROUTE is not set - -# -# Network testing -# -# CONFIG_NET_PKTGEN is not set -# CONFIG_NETFILTER_NETLINK is not set -# CONFIG_HAMRADIO is not set -# CONFIG_IRDA is not set -# CONFIG_BT is not set -# CONFIG_IEEE80211 is not set - -# -# Device Drivers -# - -# -# Generic Driver Options -# -CONFIG_STANDALONE=y -CONFIG_PREVENT_FIRMWARE_BUILD=y -# CONFIG_FW_LOADER is not set -# CONFIG_DEBUG_DRIVER is not set - -# -# Memory Technology Devices (MTD) -# -CONFIG_MTD=y -CONFIG_MTD_DEBUG=y -CONFIG_MTD_DEBUG_VERBOSE=3 -# CONFIG_MTD_CONCAT is not set -CONFIG_MTD_PARTITIONS=y -CONFIG_MTD_REDBOOT_PARTS=m -CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-2 -CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED=y -# CONFIG_MTD_REDBOOT_PARTS_READONLY is not set -CONFIG_MTD_CMDLINE_PARTS=y -# CONFIG_MTD_AFS_PARTS is not set - -# -# User Modules And Translation Layers -# -CONFIG_MTD_CHAR=y -CONFIG_MTD_BLOCK=y -# CONFIG_FTL is not set -# CONFIG_NFTL is not set -# CONFIG_INFTL is not set - -# -# RAM/ROM/Flash chip drivers -# -CONFIG_MTD_CFI=m -# CONFIG_MTD_JEDECPROBE is not set -CONFIG_MTD_GEN_PROBE=m -CONFIG_MTD_CFI_ADV_OPTIONS=y -CONFIG_MTD_CFI_NOSWAP=y -# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set -# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set -CONFIG_MTD_CFI_GEOMETRY=y -# CONFIG_MTD_MAP_BANK_WIDTH_1 is not set -# CONFIG_MTD_MAP_BANK_WIDTH_2 is not set -CONFIG_MTD_MAP_BANK_WIDTH_4=y -# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set -# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set -# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set -# CONFIG_MTD_CFI_I1 is not set -CONFIG_MTD_CFI_I2=y -# CONFIG_MTD_CFI_I4 is not set -# CONFIG_MTD_CFI_I8 is not set -# CONFIG_MTD_OTP is not set -CONFIG_MTD_CFI_INTELEXT=m -# CONFIG_MTD_CFI_AMDSTD is not set -# CONFIG_MTD_CFI_STAA is not set -CONFIG_MTD_CFI_UTIL=m -# CONFIG_MTD_RAM is not set -# CONFIG_MTD_ROM is not set -# CONFIG_MTD_ABSENT is not set -# CONFIG_MTD_OBSOLETE_CHIPS is not set -# CONFIG_MTD_XIP is not set - -# -# Mapping drivers for chip access -# -# CONFIG_MTD_COMPLEX_MAPPINGS is not set -CONFIG_MTD_PHYSMAP=m -CONFIG_MTD_PHYSMAP_START=0x0000000 -CONFIG_MTD_PHYSMAP_LEN=0x4000000 -CONFIG_MTD_PHYSMAP_BANKWIDTH=2 -# CONFIG_MTD_ARM_INTEGRATOR is not set -CONFIG_MTD_EDB7312=m -# CONFIG_MTD_PLATRAM is not set - -# -# Self-contained MTD device drivers -# -# CONFIG_MTD_SLRAM is not set -# CONFIG_MTD_PHRAM is not set -# CONFIG_MTD_MTDRAM is not set -# CONFIG_MTD_BLKMTD is not set -# CONFIG_MTD_BLOCK2MTD is not set - -# -# Disk-On-Chip Device Drivers -# -# CONFIG_MTD_DOC2000 is not set -# CONFIG_MTD_DOC2001 is not set -# CONFIG_MTD_DOC2001PLUS is not set - -# -# NAND Flash Device Drivers -# -CONFIG_MTD_NAND=y -# CONFIG_MTD_NAND_VERIFY_WRITE is not set -CONFIG_MTD_NAND_MP1000=y -CONFIG_MTD_NAND_IDS=y -# CONFIG_MTD_NAND_DISKONCHIP is not set -# CONFIG_MTD_NAND_NANDSIM is not set - -# -# Parallel port support -# -# CONFIG_PARPORT is not set - -# -# Plug and Play support -# - -# -# Block devices -# -# CONFIG_BLK_DEV_COW_COMMON is not set -CONFIG_BLK_DEV_LOOP=m -# CONFIG_BLK_DEV_CRYPTOLOOP is not set -# CONFIG_BLK_DEV_NBD is not set -CONFIG_BLK_DEV_RAM=y -CONFIG_BLK_DEV_RAM_COUNT=2 -CONFIG_BLK_DEV_RAM_SIZE=16384 -CONFIG_BLK_DEV_INITRD=y -# CONFIG_CDROM_PKTCDVD is not set - -# -# IO Schedulers -# -CONFIG_IOSCHED_NOOP=y -CONFIG_IOSCHED_AS=y -CONFIG_IOSCHED_DEADLINE=y -CONFIG_IOSCHED_CFQ=y -# CONFIG_ATA_OVER_ETH is not set - -# -# ATA/ATAPI/MFM/RLL support -# -CONFIG_IDE=y -CONFIG_BLK_DEV_IDE=y - -# -# Please see Documentation/ide.txt for help/info on IDE drives -# -# CONFIG_BLK_DEV_IDE_SATA is not set -# CONFIG_BLK_DEV_HD_IDE is not set -CONFIG_BLK_DEV_IDEDISK=y -# CONFIG_IDEDISK_MULTI_MODE is not set -# CONFIG_BLK_DEV_IDECD is not set -# CONFIG_BLK_DEV_IDETAPE is not set -# CONFIG_BLK_DEV_IDEFLOPPY is not set -# CONFIG_IDE_TASK_IOCTL is not set - -# -# IDE chipset support/bugfixes -# -# CONFIG_IDE_GENERIC is not set -CONFIG_IDE_ARM=y -CONFIG_BLK_DEV_IDE_MP1000=y -# CONFIG_BLK_DEV_IDEDMA is not set -# CONFIG_IDEDMA_AUTO is not set -# CONFIG_BLK_DEV_HD is not set - -# -# SCSI device support -# -# CONFIG_RAID_ATTRS is not set -# CONFIG_SCSI is not set - -# -# Multi-device support (RAID and LVM) -# -CONFIG_MD=y -# CONFIG_BLK_DEV_MD is not set -CONFIG_BLK_DEV_DM=y -# CONFIG_DM_CRYPT is not set -# CONFIG_DM_SNAPSHOT is not set -# CONFIG_DM_MIRROR is not set -# CONFIG_DM_ZERO is not set -# CONFIG_DM_MULTIPATH is not set - -# -# Fusion MPT device support -# -# CONFIG_FUSION is not set - -# -# IEEE 1394 (FireWire) support -# -# CONFIG_IEEE1394 is not set - -# -# I2O device support -# - -# -# Network device support -# -CONFIG_NETDEVICES=y -# CONFIG_DUMMY is not set -# CONFIG_BONDING is not set -# CONFIG_EQUALIZER is not set -# CONFIG_TUN is not set - -# -# PHY device support -# -# CONFIG_PHYLIB is not set - -# -# Ethernet (10 or 100Mbit) -# -CONFIG_NET_ETHERNET=y -# CONFIG_MII is not set -# CONFIG_SMC91X is not set -# CONFIG_DM9000 is not set -CONFIG_CS89x0=y - -# -# Ethernet (1000 Mbit) -# - -# -# Ethernet (10000 Mbit) -# - -# -# Token Ring devices -# - -# -# Wireless LAN (non-hamradio) -# -# CONFIG_NET_RADIO is not set - -# -# Wan interfaces -# -# CONFIG_WAN is not set -# CONFIG_PPP is not set -# CONFIG_SLIP is not set -# CONFIG_SHAPER is not set -# CONFIG_NETCONSOLE is not set -# CONFIG_NETPOLL is not set -# CONFIG_NET_POLL_CONTROLLER is not set - -# -# ISDN subsystem -# -# CONFIG_ISDN is not set - -# -# Input device support -# -CONFIG_INPUT=y - -# -# Userland interfaces -# -# CONFIG_INPUT_MOUSEDEV is not set -# CONFIG_INPUT_JOYDEV is not set -# CONFIG_INPUT_TSDEV is not set -# CONFIG_INPUT_EVDEV is not set -CONFIG_INPUT_EVBUG=y - -# -# Input Device Drivers -# -# CONFIG_INPUT_KEYBOARD is not set -# CONFIG_INPUT_MOUSE is not set -# CONFIG_INPUT_JOYSTICK is not set -# CONFIG_INPUT_TOUCHSCREEN is not set -# CONFIG_INPUT_MISC is not set - -# -# Hardware I/O ports -# -CONFIG_SERIO=y -CONFIG_SERIO_SERPORT=y -# CONFIG_SERIO_LIBPS2 is not set -# CONFIG_SERIO_RAW is not set -# CONFIG_GAMEPORT is not set - -# -# Character devices -# -CONFIG_VT=y -CONFIG_VT_CONSOLE=y -CONFIG_HW_CONSOLE=y -# CONFIG_SERIAL_NONSTANDARD is not set - -# -# Serial drivers -# -CONFIG_SERIAL_8250=y -CONFIG_SERIAL_8250_CONSOLE=y -CONFIG_SERIAL_8250_NR_UARTS=2 -# CONFIG_SERIAL_8250_EXTENDED is not set - -# -# Non-8250 serial port support -# -CONFIG_SERIAL_CLPS711X=y -CONFIG_SERIAL_CLPS711X_CONSOLE=y -CONFIG_SERIAL_CORE=y -CONFIG_SERIAL_CORE_CONSOLE=y -CONFIG_UNIX98_PTYS=y -CONFIG_LEGACY_PTYS=y -CONFIG_LEGACY_PTY_COUNT=256 - -# -# IPMI -# -# CONFIG_IPMI_HANDLER is not set - -# -# Watchdog Cards -# -# CONFIG_WATCHDOG is not set -CONFIG_NVRAM=y -CONFIG_RTC=y -# CONFIG_DTLK is not set -# CONFIG_R3964 is not set - -# -# Ftape, the floppy tape device driver -# -# CONFIG_RAW_DRIVER is not set - -# -# TPM devices -# - -# -# I2C support -# -# CONFIG_I2C is not set - -# -# Hardware Monitoring support -# -CONFIG_HWMON=y -# CONFIG_HWMON_VID is not set -# CONFIG_HWMON_DEBUG_CHIP is not set - -# -# Misc devices -# - -# -# Multimedia Capabilities Port drivers -# - -# -# Multimedia devices -# -# CONFIG_VIDEO_DEV is not set - -# -# Digital Video Broadcasting Devices -# -# CONFIG_DVB is not set - -# -# Graphics support -# -# CONFIG_FB is not set - -# -# Console display driver support -# -# CONFIG_VGA_CONSOLE is not set -CONFIG_DUMMY_CONSOLE=y - -# -# Sound -# -# CONFIG_SOUND is not set - -# -# USB support -# -CONFIG_USB_ARCH_HAS_HCD=y -# CONFIG_USB_ARCH_HAS_OHCI is not set -# CONFIG_USB is not set - -# -# USB Gadget Support -# -# CONFIG_USB_GADGET is not set - -# -# MMC/SD Card support -# -# CONFIG_MMC is not set - -# -# File systems -# -CONFIG_EXT2_FS=y -CONFIG_EXT2_FS_XATTR=y -# CONFIG_EXT2_FS_POSIX_ACL is not set -# CONFIG_EXT2_FS_SECURITY is not set -# CONFIG_EXT2_FS_XIP is not set -CONFIG_EXT3_FS=y -CONFIG_EXT3_FS_XATTR=y -# CONFIG_EXT3_FS_POSIX_ACL is not set -# CONFIG_EXT3_FS_SECURITY is not set -CONFIG_JBD=y -# CONFIG_JBD_DEBUG is not set -CONFIG_FS_MBCACHE=y -CONFIG_REISERFS_FS=m -# CONFIG_REISERFS_CHECK is not set -# CONFIG_REISERFS_PROC_INFO is not set -# CONFIG_REISERFS_FS_XATTR is not set -# CONFIG_JFS_FS is not set -CONFIG_FS_POSIX_ACL=y -# CONFIG_XFS_FS is not set -# CONFIG_MINIX_FS is not set -# CONFIG_ROMFS_FS is not set -CONFIG_INOTIFY=y -CONFIG_QUOTA=y -# CONFIG_QFMT_V1 is not set -# CONFIG_QFMT_V2 is not set -CONFIG_QUOTACTL=y -CONFIG_DNOTIFY=y -# CONFIG_AUTOFS_FS is not set -# CONFIG_AUTOFS4_FS is not set -# CONFIG_FUSE_FS is not set - -# -# CD-ROM/DVD Filesystems -# -# CONFIG_ISO9660_FS is not set -# CONFIG_UDF_FS is not set - -# -# DOS/FAT/NT Filesystems -# -# CONFIG_MSDOS_FS is not set -# CONFIG_VFAT_FS is not set -# CONFIG_NTFS_FS is not set - -# -# Pseudo filesystems -# -CONFIG_PROC_FS=y -CONFIG_SYSFS=y -CONFIG_TMPFS=y -# CONFIG_HUGETLBFS is not set -# CONFIG_HUGETLB_PAGE is not set -CONFIG_RAMFS=y -# CONFIG_RELAYFS_FS is not set - -# -# Miscellaneous filesystems -# -# CONFIG_ADFS_FS is not set -# CONFIG_AFFS_FS is not set -# CONFIG_HFS_FS is not set -# CONFIG_HFSPLUS_FS is not set -# CONFIG_BEFS_FS is not set -# CONFIG_BFS_FS is not set -# CONFIG_EFS_FS is not set -# CONFIG_JFFS_FS is not set -CONFIG_JFFS2_FS=m -CONFIG_JFFS2_FS_DEBUG=0 -CONFIG_JFFS2_FS_WRITEBUFFER=y -# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set -CONFIG_JFFS2_ZLIB=y -CONFIG_JFFS2_RTIME=y -# CONFIG_JFFS2_RUBIN is not set -CONFIG_CRAMFS=m -# CONFIG_VXFS_FS is not set -# CONFIG_HPFS_FS is not set -# CONFIG_QNX4FS_FS is not set -# CONFIG_SYSV_FS is not set -# CONFIG_UFS_FS is not set - -# -# Network File Systems -# -CONFIG_NFS_FS=y -CONFIG_NFS_V3=y -# CONFIG_NFS_V3_ACL is not set -CONFIG_NFS_V4=y -# CONFIG_NFS_DIRECTIO is not set -CONFIG_NFSD=y -CONFIG_NFSD_V3=y -# CONFIG_NFSD_V3_ACL is not set -CONFIG_NFSD_V4=y -CONFIG_NFSD_TCP=y -CONFIG_ROOT_NFS=y -CONFIG_LOCKD=y -CONFIG_LOCKD_V4=y -CONFIG_EXPORTFS=y -CONFIG_NFS_COMMON=y -CONFIG_SUNRPC=y -CONFIG_SUNRPC_GSS=y -CONFIG_RPCSEC_GSS_KRB5=y -# CONFIG_RPCSEC_GSS_SPKM3 is not set -CONFIG_SMB_FS=m -# CONFIG_SMB_NLS_DEFAULT is not set -CONFIG_CIFS=m -# CONFIG_CIFS_STATS is not set -# CONFIG_CIFS_XATTR is not set -# CONFIG_CIFS_EXPERIMENTAL is not set -# CONFIG_NCP_FS is not set -# CONFIG_CODA_FS is not set -# CONFIG_AFS_FS is not set -# CONFIG_9P_FS is not set - -# -# Partition Types -# -# CONFIG_PARTITION_ADVANCED is not set -CONFIG_MSDOS_PARTITION=y - -# -# Native Language Support -# -CONFIG_NLS=y -CONFIG_NLS_DEFAULT="iso8859-1" -CONFIG_NLS_CODEPAGE_437=y -# CONFIG_NLS_CODEPAGE_737 is not set -# CONFIG_NLS_CODEPAGE_775 is not set -# CONFIG_NLS_CODEPAGE_850 is not set -# CONFIG_NLS_CODEPAGE_852 is not set -# CONFIG_NLS_CODEPAGE_855 is not set -# CONFIG_NLS_CODEPAGE_857 is not set -# CONFIG_NLS_CODEPAGE_860 is not set -# CONFIG_NLS_CODEPAGE_861 is not set -# CONFIG_NLS_CODEPAGE_862 is not set -# CONFIG_NLS_CODEPAGE_863 is not set -# CONFIG_NLS_CODEPAGE_864 is not set -# CONFIG_NLS_CODEPAGE_865 is not set -# CONFIG_NLS_CODEPAGE_866 is not set -# CONFIG_NLS_CODEPAGE_869 is not set -# CONFIG_NLS_CODEPAGE_936 is not set -# CONFIG_NLS_CODEPAGE_950 is not set -# CONFIG_NLS_CODEPAGE_932 is not set -# CONFIG_NLS_CODEPAGE_949 is not set -# CONFIG_NLS_CODEPAGE_874 is not set -# CONFIG_NLS_ISO8859_8 is not set -# CONFIG_NLS_CODEPAGE_1250 is not set -# CONFIG_NLS_CODEPAGE_1251 is not set -# CONFIG_NLS_ASCII is not set -# CONFIG_NLS_ISO8859_1 is not set -# CONFIG_NLS_ISO8859_2 is not set -# CONFIG_NLS_ISO8859_3 is not set -# CONFIG_NLS_ISO8859_4 is not set -# CONFIG_NLS_ISO8859_5 is not set -# CONFIG_NLS_ISO8859_6 is not set -# CONFIG_NLS_ISO8859_7 is not set -# CONFIG_NLS_ISO8859_9 is not set -# CONFIG_NLS_ISO8859_13 is not set -# CONFIG_NLS_ISO8859_14 is not set -# CONFIG_NLS_ISO8859_15 is not set -# CONFIG_NLS_KOI8_R is not set -# CONFIG_NLS_KOI8_U is not set -# CONFIG_NLS_UTF8 is not set - -# -# Profiling support -# -# CONFIG_PROFILING is not set - -# -# Kernel hacking -# -CONFIG_PRINTK_TIME=y -CONFIG_DEBUG_KERNEL=y -# CONFIG_MAGIC_SYSRQ is not set -CONFIG_LOG_BUF_SHIFT=14 -CONFIG_DETECT_SOFTLOCKUP=y -# CONFIG_SCHEDSTATS is not set -# CONFIG_DEBUG_SLAB is not set -CONFIG_DEBUG_PREEMPT=y -# CONFIG_DEBUG_SPINLOCK is not set -# CONFIG_DEBUG_SPINLOCK_SLEEP is not set -# CONFIG_DEBUG_KOBJECT is not set -# CONFIG_DEBUG_BUGVERBOSE is not set -CONFIG_DEBUG_INFO=y -# CONFIG_DEBUG_FS is not set -CONFIG_FRAME_POINTER=y -CONFIG_DEBUG_USER=y -CONFIG_DEBUG_WAITQ=y -CONFIG_DEBUG_ERRORS=y -CONFIG_DEBUG_LL=y -# CONFIG_DEBUG_ICEDCC is not set -# CONFIG_DEBUG_CLPS711X_UART2 is not set - -# -# Security options -# -# CONFIG_KEYS is not set -# CONFIG_SECURITY is not set - -# -# Cryptographic options -# -CONFIG_CRYPTO=y -# CONFIG_CRYPTO_HMAC is not set -# CONFIG_CRYPTO_NULL is not set -# CONFIG_CRYPTO_MD4 is not set -CONFIG_CRYPTO_MD5=y -# CONFIG_CRYPTO_SHA1 is not set -# CONFIG_CRYPTO_SHA256 is not set -# CONFIG_CRYPTO_SHA512 is not set -# CONFIG_CRYPTO_WP512 is not set -# CONFIG_CRYPTO_TGR192 is not set -CONFIG_CRYPTO_DES=y -# CONFIG_CRYPTO_BLOWFISH is not set -# CONFIG_CRYPTO_TWOFISH is not set -# CONFIG_CRYPTO_SERPENT is not set -# CONFIG_CRYPTO_AES is not set -# CONFIG_CRYPTO_CAST5 is not set -# CONFIG_CRYPTO_CAST6 is not set -# CONFIG_CRYPTO_TEA is not set -# CONFIG_CRYPTO_ARC4 is not set -# CONFIG_CRYPTO_KHAZAD is not set -# CONFIG_CRYPTO_ANUBIS is not set -# CONFIG_CRYPTO_DEFLATE is not set -# CONFIG_CRYPTO_MICHAEL_MIC is not set -# CONFIG_CRYPTO_CRC32C is not set -# CONFIG_CRYPTO_TEST is not set - -# -# Hardware crypto devices -# - -# -# Library routines -# -# CONFIG_CRC_CCITT is not set -# CONFIG_CRC16 is not set -CONFIG_CRC32=y -# CONFIG_LIBCRC32C is not set -CONFIG_ZLIB_INFLATE=m -CONFIG_ZLIB_DEFLATE=m diff --git a/arch/arm/mach-clps711x/Kconfig b/arch/arm/mach-clps711x/Kconfig index d5c15504576..0793dcf54f2 100644 --- a/arch/arm/mach-clps711x/Kconfig +++ b/arch/arm/mach-clps711x/Kconfig @@ -69,17 +69,6 @@ config EP72XX_ROM_BOOT You almost surely want to say N here. -config MACH_MP1000 - bool "MACH_MP1000" - help - Say Y if you intend to run the kernel on the Comdial MP1000 platform. - -config MP1000_90MHZ - bool "MP1000_90MHZ" - depends on MACH_MP1000 - help - Say Y if you have the MP1000 configured to be set at 90MHZ rather than 74MHZ - endmenu endif diff --git a/arch/arm/mach-clps711x/Makefile b/arch/arm/mach-clps711x/Makefile index 8a6dc1ccf8f..4a197315f0c 100644 --- a/arch/arm/mach-clps711x/Makefile +++ b/arch/arm/mach-clps711x/Makefile @@ -15,7 +15,6 @@ obj-$(CONFIG_ARCH_CDB89712) += cdb89712.o obj-$(CONFIG_ARCH_CLEP7312) += clep7312.o obj-$(CONFIG_ARCH_EDB7211) += edb7211-arch.o edb7211-mm.o obj-$(CONFIG_ARCH_FORTUNET) += fortunet.o -obj-$(CONFIG_MACH_MP1000) += mp1000-mach.o mp1000-mm.o mp1000-seprom.o obj-$(CONFIG_ARCH_P720T) += p720t.o leds-$(CONFIG_ARCH_P720T) += p720t-leds.o obj-$(CONFIG_LEDS) += $(leds-y) diff --git a/arch/arm/mach-clps711x/mp1000-mach.c b/arch/arm/mach-clps711x/mp1000-mach.c deleted file mode 100644 index c2816bcde5e..00000000000 --- a/arch/arm/mach-clps711x/mp1000-mach.c +++ /dev/null @@ -1,49 +0,0 @@ -/* - * linux/arch/arm/mach-mp1000/mp1000.c - * - * Copyright (C) 2005 Comdial Corporation - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ -#include -#include -#include - -#include -#include -#include -#include - -#include "common.h" - -extern void mp1000_map_io(void); - -static void __init mp1000_init(void) -{ - seprom_init(); -} - -MACHINE_START(MP1000, "Comdial MP1000") - /* Maintainer: Jon Ringle */ - .phys_ram = 0xc0000000, - .phys_io = 0x80000000, - .io_pg_offst = ((0xff000000) >> 18) & 0xfffc, - .boot_params = 0xc0015100, - .map_io = mp1000_map_io, - .init_irq = clps711x_init_irq, - .init_machine = mp1000_init, - .timer = &clps711x_timer, -MACHINE_END - diff --git a/arch/arm/mach-clps711x/mp1000-mm.c b/arch/arm/mach-clps711x/mp1000-mm.c deleted file mode 100644 index 20e810b0ec0..00000000000 --- a/arch/arm/mach-clps711x/mp1000-mm.c +++ /dev/null @@ -1,47 +0,0 @@ -/* - * linux/arch/arm/mach-mp1000/mm.c - * - * Extra MM routines for the MP1000 - * - * Copyright (C) 2005 Comdial Corporation - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ -#include -#include - -#include -#include -#include -#include - -#include - -extern void clps711x_map_io(void); - -static struct map_desc mp1000_io_desc[] __initdata = { - { MP1000_EIO_BASE, MP1000_EIO_START, MP1000_EIO_SIZE, MT_DEVICE }, - { MP1000_FIO_BASE, MP1000_FIO_START, MP1000_FIO_SIZE, MT_DEVICE }, - { MP1000_LIO_BASE, MP1000_LIO_START, MP1000_LIO_SIZE, MT_DEVICE }, - { MP1000_NIO_BASE, MP1000_NIO_START, MP1000_NIO_SIZE, MT_DEVICE }, - { MP1000_IDE_BASE, MP1000_IDE_START, MP1000_IDE_SIZE, MT_DEVICE }, - { MP1000_DSP_BASE, MP1000_DSP_START, MP1000_DSP_SIZE, MT_DEVICE } -}; - -void __init mp1000_map_io(void) -{ - clps711x_map_io(); - iotable_init(mp1000_io_desc, ARRAY_SIZE(mp1000_io_desc)); -} diff --git a/arch/arm/mach-clps711x/mp1000-seprom.c b/arch/arm/mach-clps711x/mp1000-seprom.c deleted file mode 100644 index b22d0bebb85..00000000000 --- a/arch/arm/mach-clps711x/mp1000-seprom.c +++ /dev/null @@ -1,195 +0,0 @@ -/*` - * mp1000-seprom.c - * - * This file contains the Serial EEPROM code for the MP1000 board - * - * Copyright (C) 2005 Comdial Corporation - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - * - */ - -#include -#include -#include -#include -#include - -/* If SepromInit() can initialize and checksum the seprom successfully, */ -/* then it will point seprom_data_ptr at the shadow copy. */ - -static eeprom_struct seprom_data; /* shadow copy of seprom content */ - -eeprom_struct *seprom_data_ptr = 0; /* 0 => not initialized */ - -/* - * Port D Bit 5 is Chip Select for EEPROM - * Port E Bit 0 is Input, Data out from EEPROM - * Port E Bit 1 is Output, Data in to EEPROM - * Port E Bit 2 is Output, CLK to EEPROM - */ - -static char *port_d_ptr = (char *)(CLPS7111_VIRT_BASE + PDDR); -static char *port_e_ptr = (char *)(CLPS7111_VIRT_BASE + PEDR); - -#define NO_OF_SHORTS 64 // Device is 64 x 16 bits -#define ENABLE_RW 0 -#define DISABLE_RW 1 - -static inline void toggle_seprom_clock(void) -{ - *port_e_ptr |= HwPortESepromCLK; - *port_e_ptr &= ~(HwPortESepromCLK); -} - -static inline void select_eeprom(void) -{ - *port_d_ptr |= HwPortDEECS; - *port_e_ptr &= ~(HwPortESepromCLK); -} - -static inline void deselect_eeprom(void) -{ - *port_d_ptr &= ~(HwPortDEECS); - *port_e_ptr &= ~(HwPortESepromDIn); -} - -/* - * GetSepromDataPtr - returns pointer to shadow (RAM) copy of seprom - * and returns 0 if seprom is not initialized or - * has a checksum error. - */ - -eeprom_struct* get_seprom_ptr(void) -{ - return seprom_data_ptr; -} - -unsigned char* get_eeprom_mac_address(void) -{ - return seprom_data_ptr->variant.eprom_struct.mac_Address; -} - -/* - * ReadSProm, Physically reads data from the Serial PROM - */ -static void read_sprom(short address, int length, eeprom_struct *buffer) -{ - short data = COMMAND_READ | (address & 0x3F); - short bit; - int i; - - select_eeprom(); - - // Clock in 9 bits of the command - for (i = 0, bit = 0x100; i < 9; i++, bit >>= 1) { - if (data & bit) - *port_e_ptr |= HwPortESepromDIn; - else - *port_e_ptr &= ~(HwPortESepromDIn); - - toggle_seprom_clock(); - } - - // - // Now read one or more shorts of data from the Seprom - // - while (length-- > 0) { - data = 0; - - // Read 16 bits at a time - for (i = 0; i < 16; i++) { - data <<= 1; - toggle_seprom_clock(); - data |= *port_e_ptr & HwPortESepromDOut; - - } - - buffer->variant.eprom_short_data[address++] = data; - } - - deselect_eeprom(); - - return; -} - - - -/* - * ReadSerialPROM - * - * Input: Pointer to array of 64 x 16 Bits - * - * Output: if no problem reading data is filled in - */ -static void read_serial_prom(eeprom_struct *data) -{ - read_sprom(0, 64, data); -} - - -// -// Compute Serial EEPROM checksum -// -// Input: Pointer to struct with Eprom data -// -// Output: The computed Eprom checksum -// -static short compute_seprom_checksum(eeprom_struct *data) -{ - short checksum = 0; - int i; - - for (i = 0; i < 126; i++) { - checksum += (short)data->variant.eprom_byte_data[i]; - } - - return((short)(0x5555 - (checksum & 0xFFFF))); -} - -// -// Make sure the data port bits for the SEPROM are correctly initialised -// - -void __init seprom_init(void) -{ - short checksum; - - // Init Port D - *(char *)(CLPS7111_VIRT_BASE + PDDDR) = 0x0; - *(char *)(CLPS7111_VIRT_BASE + PDDR) = 0x15; - - // Init Port E - *(int *)(CLPS7111_VIRT_BASE + PEDDR) = 0x06; - *(int *)(CLPS7111_VIRT_BASE + PEDR) = 0x04; - - // - // Make sure that EEPROM struct size never exceeds 128 bytes - // - if (sizeof(eeprom_struct) > 128) { - panic("Serial PROM struct size > 128, aborting read\n"); - } - - read_serial_prom(&seprom_data); - - checksum = compute_seprom_checksum(&seprom_data); - - if (checksum != seprom_data.variant.eprom_short_data[63]) { - panic("Serial EEPROM checksum failed\n"); - } - - seprom_data_ptr = &seprom_data; -} - diff --git a/drivers/serial/clps711x.c b/drivers/serial/clps711x.c index 6a67e8f585b..87ef368384f 100644 --- a/drivers/serial/clps711x.c +++ b/drivers/serial/clps711x.c @@ -408,11 +408,7 @@ static struct uart_port clps711x_ports[UART_NR] = { { .iobase = SYSCON1, .irq = IRQ_UTXINT1, /* IRQ_URXINT1, IRQ_UMSINT */ -#ifdef CONFIG_MP1000_90MHZ - .uartclk = 4515840, -#else .uartclk = 3686400, -#endif .fifosize = 16, .ops = &clps711x_pops, .line = 0, @@ -421,11 +417,7 @@ static struct uart_port clps711x_ports[UART_NR] = { { .iobase = SYSCON2, .irq = IRQ_UTXINT2, /* IRQ_URXINT2 */ -#ifdef CONFIG_MP1000_90MHZ - .uartclk = 4515840, -#else .uartclk = 3686400, -#endif .fifosize = 16, .ops = &clps711x_pops, .line = 1, @@ -559,7 +551,6 @@ console_initcall(clps711xuart_console_init); static struct uart_driver clps711x_reg = { .driver_name = "ttyCL", .dev_name = "ttyCL", - .devfs_name = "ttyCL", .major = SERIAL_CLPS711X_MAJOR, .minor = SERIAL_CLPS711X_MINOR, .nr = UART_NR, diff --git a/include/asm-arm/arch-clps711x/hardware.h b/include/asm-arm/arch-clps711x/hardware.h index f864c367c93..1386871e1a5 100644 --- a/include/asm-arm/arch-clps711x/hardware.h +++ b/include/asm-arm/arch-clps711x/hardware.h @@ -235,121 +235,4 @@ #define CEIVA_PB0_BLK_BTN (1<<0) #endif // #if defined (CONFIG_ARCH_CEIVA) -#if defined (CONFIG_MACH_MP1000) -/* NOR FLASH */ -#define MP1000_NIO_BASE 0xf9000000 /* virtual */ -#define MP1000_NIO_START CS0_PHYS_BASE /* physical */ -#define MP1000_NIO_SIZE 0x00400000 - -/* DSP Interface */ -#define MP1000_DSP_BASE 0xfa000000 /* virtual */ -#define MP1000_DSP_START CS1_PHYS_BASE /* physical */ -#define MP1000_DSP_SIZE 0x00100000 - -/* LCD, DAA/DSP, RTC, DAA RW Reg all in CS2 */ -#define MP1000_LIO_BASE 0xfb000000 /* virtual */ -#define MP1000_LIO_START CS2_PHYS_BASE /* physical */ -#define MP1000_LIO_SIZE 0x00100000 - -/* NAND FLASH */ -#define MP1000_FIO_BASE 0xfc000000 /* virtual */ -#define MP1000_FIO_START CS3_PHYS_BASE /* physical */ -#define MP1000_FIO_SIZE 0x00800000 - -/* Ethernet */ -#define MP1000_EIO_BASE 0xfd000000 /* virtual */ -#define MP1000_EIO_START CS4_PHYS_BASE /* physical */ -#define MP1000_EIO_SIZE 0x00100000 - -#define MP1000_LCD_OFFSET 0x00000000 /* LCD offset in CS2 */ -#define MP1000_DDD_OFFSET 0x00001000 /* DAA/DAI/DSP sft reset offst*/ -#define MP1000_RTC_OFFSET 0x00002000 /* RTC offset in CS2 */ -#define MP1000_DAA_OFFSET 0x00003000 /* DAA RW reg offset in CS2 */ - -/* IDE */ -#define MP1000_IDE_BASE 0xfe000000 /* virtual */ -#define MP1000_IDE_START CS5_PHYS_BASE /* physical */ -#define MP1000_IDE_SIZE 0x00100000 /* actually it's only 0x1000 */ - -#define IRQ_HARDDISK IRQ_EINT2 - -/* - * IDE registers definition - */ - -#define IDE_CONTROL_BASE (MP1000_IDE_BASE + 0x1000) -#define IDE_BASE_OFF (MP1000_IDE_BASE) - -#define IDE_WRITE_DEVICE_DATA (IDE_BASE_OFF + 0x0) -#define IDE_FEATURES_REGISTER (IDE_BASE_OFF + 0x2) -#define IDE_SECTOR_COUNT_REGISTER (IDE_BASE_OFF + 0x4) -#define IDE_SECTOR_NUMBER_REGISTER (IDE_BASE_OFF + 0x6) -#define IDE_CYLINDER_LOW_REGISTER (IDE_BASE_OFF + 0x8) -#define IDE_CYLINDER_HIGH_REGISTER (IDE_BASE_OFF + 0xa) -#define IDE_DEVICE_HEAD_REGISTER (IDE_BASE_OFF + 0xc) -#define IDE_COMMAND_DATA_REGISTER (IDE_BASE_OFF + 0xe) -#define IDE_DEVICE_CONTROL_REGISTER (IDE_CONTROL_BASE + 0xc) - -#define IDE_IRQ IRQ_EINT2 - - -#define RTC_PORT(x) (MP1000_LIO_BASE+0x2000 + (x*2)) -#define RTC_ALWAYS_BCD 0 - -/* -// Definitions of the bit fields in the HwPortA register for the -// MP1000 board. -*/ -#define HwPortAKeyboardRow1 0x00000001 -#define HwPortAKeyboardRow2 0x00000002 -#define HwPortAKeyboardRow3 0x00000004 -#define HwPortAKeyboardRow4 0x00000008 -#define HwPortAKeyboardRow5 0x00000010 -#define HwPortAKeyboardRow6 0x00000020 -#define HwPortALCDEnable 0x00000040 -#define HwPortAOffhook 0x00000080 - -/* -// Definitions of the bit fields in the HwPortB register for the -// MP1000 board. -*/ -#define HwPortBL3Mode 0x00000001 -#define HwPortBL3Clk 0x00000002 -#define HwPortBSClk 0x00000001 -#define HwPortBSData 0x00000002 -#define HwPortBL3Data 0x00000004 -#define HwPortBMute 0x00000008 -#define HwPortBQD0 0x00000010 -#define HwPortBQD1 0x00000020 -#define HwPortBQD2 0x00000040 -#define HwPortBQD3 0x00000080 - -/* -// Definitions of the bit fields in the HwPortD register for the -// MP1000 board. -*/ -#define HwPortDLED1 0x00000001 -#define HwPortDLED2 0x00000002 -#define HwPortDLED3 0x00000004 -#define HwPortDLED4 0x00000008 -#define HwPortDLED5 0x00000010 -#define HwPortDEECS 0x00000020 -#define HwPortBRTS 0x00000040 -#define HwPortBRI 0x00000080 - - -/* -// Definitions of the bit fields in the HwPortE register for the -// MP1000 board. -*/ - -#define HwPortECLE 0x00000001 -#define HwPortESepromDOut 0x00000001 -#define HwPortEALE 0x00000002 -#define HwPortESepromDIn 0x00000002 -#define HwPortENANDCS 0x00000004 -#define HwPortESepromCLK 0x00000004 - -#endif // #if defined (CONFIG_MACH_MP1000) - #endif diff --git a/include/asm-arm/arch-clps711x/mp1000-seprom.h b/include/asm-arm/arch-clps711x/mp1000-seprom.h deleted file mode 100644 index 3e5566cf966..00000000000 --- a/include/asm-arm/arch-clps711x/mp1000-seprom.h +++ /dev/null @@ -1,77 +0,0 @@ -#ifndef MP1000_SEPROM_H -#define MP1000_SEPROM_H - -/* - * mp1000-seprom.h - * - * - * This file contains the Serial EEPROM definitions for the MP1000 board - * - * Copyright (C) 2005 Comdial Corporation - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - * - */ - -#define COMMAND_ERASE (0x1C0) -#define COMMAND_ERASE_ALL (0x120) -#define COMMAND_WRITE_DISABLE (0x100) -#define COMMAND_WRITE_ENABLE (0x130) -#define COMMAND_READ (0x180) -#define COMMAND_WRITE (0x140) -#define COMMAND_WRITE_ALL (0x110) - -// -// Serial EEPROM data format -// - -#define PACKED __attribute__ ((packed)) - -typedef struct _EEPROM { - union { - unsigned char eprom_byte_data[128]; - unsigned short eprom_short_data[64]; - struct { - unsigned char version PACKED; // EEPROM Version "1" for now - unsigned char box_id PACKED; // Box ID (Standalone, SOHO, embedded, etc) - unsigned char major_hw_version PACKED; // Major Hardware version (Hex) - unsigned char minor_hw_version PACKED; // Minor Hardware Version (Hex) - unsigned char mfg_id[3] PACKED; // Manufacturer ID (3 character Alphabetic) - unsigned char mfg_serial_number[10] PACKED; // Manufacturer Serial number - unsigned char mfg_date[3] PACKED; // Date of Mfg (Formatted YY:MM:DD) - unsigned char country PACKED; // Country of deployment - unsigned char mac_Address[6] PACKED; // MAC Address - unsigned char oem_string[20] PACKED; // OEM ID string - unsigned short feature_bits1 PACKED; // Feature Bits 1 - unsigned short feature_bits2 PACKED; // Feature Bits 2 - unsigned char filler[75] PACKED; // Unused/Undefined “0” initialized - unsigned short checksum PACKED; // byte accumulated short checksum - } eprom_struct; - } variant; -} eeprom_struct; - -/* These settings must be mutually exclusive */ -#define FEATURE_BITS1_DRAMSIZE_16MEG 0x0001 /* 0 signifies 4 MEG system */ -#define FEATURE_BITS1_DRAMSIZE_8MEG 0x0002 /* 1 in bit 1 = 8MEG system */ -#define FEATURE_BITS1_DRAMSIZE_64MEG 0x0004 /* 1 in bit 2 = 64MEG system */ - -#define FEATURE_BITS1_CPUIS90MEG 0x0010 - -extern void seprom_init(void); -extern eeprom_struct* get_seprom_ptr(void); -extern unsigned char* get_eeprom_mac_address(void); - -#endif /* MP1000_SEPROM_H */ - -- cgit v1.2.3