From 13aa6ecb47990cfc78e20e347fdd3f1df6189426 Mon Sep 17 00:00:00 2001 From: "Michael S. Tsirkin" Date: Mon, 12 Jun 2006 16:57:51 +0300 Subject: IB/mthca: restore missing PCI registers after reset mthca does not restore the following PCI-X/PCI Express registers after reset: PCI-X device: PCI-X command register PCI-X bridge: upstream and downstream split transaction registers PCI Express : PCI Express device control and link control registers This causes instability and/or bad performance on systems where one of these registers is set to a non-default value by BIOS. Signed-off-by: Michael S. Tsirkin Signed-off-by: Roland Dreier --- drivers/infiniband/hw/mthca/mthca_reset.c | 59 +++++++++++++++++++++++++++++++ 1 file changed, 59 insertions(+) diff --git a/drivers/infiniband/hw/mthca/mthca_reset.c b/drivers/infiniband/hw/mthca/mthca_reset.c index df5e494a9d3..f4fddd5327f 100644 --- a/drivers/infiniband/hw/mthca/mthca_reset.c +++ b/drivers/infiniband/hw/mthca/mthca_reset.c @@ -49,6 +49,12 @@ int mthca_reset(struct mthca_dev *mdev) u32 *hca_header = NULL; u32 *bridge_header = NULL; struct pci_dev *bridge = NULL; + int bridge_pcix_cap = 0; + int hca_pcie_cap = 0; + int hca_pcix_cap = 0; + + u16 devctl; + u16 linkctl; #define MTHCA_RESET_OFFSET 0xf0010 #define MTHCA_RESET_VALUE swab32(1) @@ -110,6 +116,9 @@ int mthca_reset(struct mthca_dev *mdev) } } + hca_pcix_cap = pci_find_capability(mdev->pdev, PCI_CAP_ID_PCIX); + hca_pcie_cap = pci_find_capability(mdev->pdev, PCI_CAP_ID_EXP); + if (bridge) { bridge_header = kmalloc(256, GFP_KERNEL); if (!bridge_header) { @@ -129,6 +138,13 @@ int mthca_reset(struct mthca_dev *mdev) goto out; } } + bridge_pcix_cap = pci_find_capability(bridge, PCI_CAP_ID_PCIX); + if (!bridge_pcix_cap) { + err = -ENODEV; + mthca_err(mdev, "Couldn't locate HCA bridge " + "PCI-X capability, aborting.\n"); + goto out; + } } /* actually hit reset */ @@ -178,6 +194,20 @@ int mthca_reset(struct mthca_dev *mdev) good: /* Now restore the PCI headers */ if (bridge) { + if (pci_write_config_dword(bridge, bridge_pcix_cap + 0x8, + bridge_header[(bridge_pcix_cap + 0x8) / 4])) { + err = -ENODEV; + mthca_err(mdev, "Couldn't restore HCA bridge Upstream " + "split transaction control, aborting.\n"); + goto out; + } + if (pci_write_config_dword(bridge, bridge_pcix_cap + 0xc, + bridge_header[(bridge_pcix_cap + 0xc) / 4])) { + err = -ENODEV; + mthca_err(mdev, "Couldn't restore HCA bridge Downstream " + "split transaction control, aborting.\n"); + goto out; + } /* * Bridge control register is at 0x3e, so we'll * naturally restore it last in this loop. @@ -203,6 +233,35 @@ good: } } + if (hca_pcix_cap) { + if (pci_write_config_dword(mdev->pdev, hca_pcix_cap, + hca_header[hca_pcix_cap / 4])) { + err = -ENODEV; + mthca_err(mdev, "Couldn't restore HCA PCI-X " + "command register, aborting.\n"); + goto out; + } + } + + if (hca_pcie_cap) { + devctl = hca_header[(hca_pcie_cap + PCI_EXP_DEVCTL) / 4]; + if (pci_write_config_word(mdev->pdev, hca_pcie_cap + PCI_EXP_DEVCTL, + devctl)) { + err = -ENODEV; + mthca_err(mdev, "Couldn't restore HCA PCI Express " + "Device Control register, aborting.\n"); + goto out; + } + linkctl = hca_header[(hca_pcie_cap + PCI_EXP_LNKCTL) / 4]; + if (pci_write_config_word(mdev->pdev, hca_pcie_cap + PCI_EXP_LNKCTL, + linkctl)) { + err = -ENODEV; + mthca_err(mdev, "Couldn't restore HCA PCI Express " + "Link control register, aborting.\n"); + goto out; + } + } + for (i = 0; i < 16; ++i) { if (i * 4 == PCI_COMMAND) continue; -- cgit v1.2.3