From 135d01899b1fba17045961febff7e5141db6048f Mon Sep 17 00:00:00 2001 From: Patrick McHardy Date: Tue, 19 Jan 2010 19:06:59 +0100 Subject: netfilter: nf_conntrack_sip: fix off-by-one in compact header parsing In a string like "v:SIP/2.0..." it was checking for !isalpha('S') when it meant to be inspecting the ':'. Patch by Greg Alexander Signed-off-by: Patrick McHardy --- net/netfilter/nf_conntrack_sip.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/net/netfilter/nf_conntrack_sip.c b/net/netfilter/nf_conntrack_sip.c index 4b572163784..023966b569b 100644 --- a/net/netfilter/nf_conntrack_sip.c +++ b/net/netfilter/nf_conntrack_sip.c @@ -376,7 +376,7 @@ int ct_sip_get_header(const struct nf_conn *ct, const char *dptr, dptr += hdr->len; else if (hdr->cname && limit - dptr >= hdr->clen + 1 && strnicmp(dptr, hdr->cname, hdr->clen) == 0 && - !isalpha(*(dptr + hdr->clen + 1))) + !isalpha(*(dptr + hdr->clen))) dptr += hdr->clen; else continue; -- cgit v1.2.3 From 74401773f80b6d42f7a4c6994ca0cca883b03745 Mon Sep 17 00:00:00 2001 From: Felix Fietkau Date: Tue, 19 Jan 2010 20:51:32 +0100 Subject: ath9k: fix beacon slot/buffer leak When cleaning up beacon buffers and slots, ath9k currently checks if sc->ah->opmode is set to a beacon related mode before cleaning up buffers. An unfortunate ordering of interface up/down commands can lead to sc->ah->opmode being set to monitor mode, while there are AP interfaces present on the same wiphy. Always cleaning up beacon buffers if present fixes this issue. Signed-off-by: Felix Fietkau Cc: stable@kernel.org Signed-off-by: John W. Linville --- drivers/net/wireless/ath/ath9k/main.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/wireless/ath/ath9k/main.c b/drivers/net/wireless/ath/ath9k/main.c index 996eb90263c..643bea35686 100644 --- a/drivers/net/wireless/ath/ath9k/main.c +++ b/drivers/net/wireless/ath/ath9k/main.c @@ -2655,10 +2655,10 @@ static void ath9k_remove_interface(struct ieee80211_hw *hw, (sc->sc_ah->opmode == NL80211_IFTYPE_MESH_POINT)) { ath9k_ps_wakeup(sc); ath9k_hw_stoptxdma(sc->sc_ah, sc->beacon.beaconq); - ath_beacon_return(sc, avp); ath9k_ps_restore(sc); } + ath_beacon_return(sc, avp); sc->sc_flags &= ~SC_OP_BEACONS; for (i = 0; i < ARRAY_SIZE(sc->beacon.bslot); i++) { -- cgit v1.2.3 From 0b5d9b2689af0f59aeba67dc749b3681290d2166 Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Fri, 22 Jan 2010 14:22:34 -0800 Subject: iwlwifi: fix pointer signedness warning There are a few station addresses that are char *, instead of the normal u8 *; gcc gives pointer signedness warnings for some of those, so use u8 * consistently. Signed-off-by: Johannes Berg Signed-off-by: Reinette Chatre Signed-off-by: John W. Linville --- drivers/net/wireless/iwlwifi/iwl-sta.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/net/wireless/iwlwifi/iwl-sta.c b/drivers/net/wireless/iwlwifi/iwl-sta.c index cde09a890b7..90fbdb25399 100644 --- a/drivers/net/wireless/iwlwifi/iwl-sta.c +++ b/drivers/net/wireless/iwlwifi/iwl-sta.c @@ -297,7 +297,7 @@ u8 iwl_add_station(struct iwl_priv *priv, const u8 *addr, bool is_ap, u8 flags, } EXPORT_SYMBOL(iwl_add_station); -static void iwl_sta_ucode_deactivate(struct iwl_priv *priv, const char *addr) +static void iwl_sta_ucode_deactivate(struct iwl_priv *priv, const u8 *addr) { unsigned long flags; u8 sta_id = iwl_find_station(priv, addr); @@ -324,7 +324,7 @@ static void iwl_remove_sta_callback(struct iwl_priv *priv, { struct iwl_rem_sta_cmd *rm_sta = (struct iwl_rem_sta_cmd *)cmd->cmd.payload; - const char *addr = rm_sta->addr; + const u8 *addr = rm_sta->addr; if (pkt->hdr.flags & IWL_CMD_FAILED_MSK) { IWL_ERR(priv, "Bad return from REPLY_REMOVE_STA (0x%08X)\n", -- cgit v1.2.3 From aa8bc9ef18a2c5b2b97e1f36ee9604cf15743f96 Mon Sep 17 00:00:00 2001 From: Felix Fietkau Date: Sat, 23 Jan 2010 20:04:18 +0100 Subject: ath9k: fix eeprom INI values override for 2GHz-only cards Among other changes, this commit: commit 06d0f0663e11cab4ec5f2c143a118d71a12fbbe9 Author: Sujith Date: Thu Feb 12 10:06:45 2009 +0530 ath9k: Enable Fractional N mode changed the hw attach code to fix up initialization values only for dual band devices, however the commit message did not give a reason as to why this would be useful or necessary. According to tests by Jorge Boncompte, this breaks at least some 2GHz-only cards, so the code should be changed back to the unconditional INI fixup. Signed-off-by: Felix Fietkau Reported-by: Jorge Boncompte Cc: stable@kernel.org Tested-by: Pavel Roskin Signed-off-by: John W. Linville --- drivers/net/wireless/ath/ath9k/hw.c | 7 +++---- 1 file changed, 3 insertions(+), 4 deletions(-) diff --git a/drivers/net/wireless/ath/ath9k/hw.c b/drivers/net/wireless/ath/ath9k/hw.c index 2ec61f08cfd..ae371448b5a 100644 --- a/drivers/net/wireless/ath/ath9k/hw.c +++ b/drivers/net/wireless/ath/ath9k/hw.c @@ -855,12 +855,11 @@ static void ath9k_hw_init_mode_gain_regs(struct ath_hw *ah) } } -static void ath9k_hw_init_11a_eeprom_fix(struct ath_hw *ah) +static void ath9k_hw_init_eeprom_fix(struct ath_hw *ah) { u32 i, j; - if ((ah->hw_version.devid == AR9280_DEVID_PCI) && - test_bit(ATH9K_MODE_11A, ah->caps.wireless_modes)) { + if (ah->hw_version.devid == AR9280_DEVID_PCI) { /* EEPROM Fixup */ for (i = 0; i < ah->iniModes.ia_rows; i++) { @@ -980,7 +979,7 @@ int ath9k_hw_init(struct ath_hw *ah) if (r) return r; - ath9k_hw_init_11a_eeprom_fix(ah); + ath9k_hw_init_eeprom_fix(ah); r = ath9k_hw_init_macaddr(ah); if (r) { -- cgit v1.2.3 From c92b544bd5d8e7ed7d81c77bbecab6df2a95aa53 Mon Sep 17 00:00:00 2001 From: Shan Wei Date: Tue, 26 Jan 2010 02:40:38 +0000 Subject: ipv6: conntrack: Add member of user to nf_ct_frag6_queue structure The commit 0b5ccb2(title:ipv6: reassembly: use seperate reassembly queues for conntrack and local delivery) has broken the saddr&&daddr member of nf_ct_frag6_queue when creating new queue. And then hash value generated by nf_hashfn() was not equal with that generated by fq_find(). So, a new received fragment can't be inserted to right queue. The patch fixes the bug with adding member of user to nf_ct_frag6_queue structure. Signed-off-by: Shan Wei Acked-by: Patrick McHardy Signed-off-by: David S. Miller --- net/ipv6/netfilter/nf_conntrack_reasm.c | 1 + 1 file changed, 1 insertion(+) diff --git a/net/ipv6/netfilter/nf_conntrack_reasm.c b/net/ipv6/netfilter/nf_conntrack_reasm.c index 312c20adc83..624a54832a7 100644 --- a/net/ipv6/netfilter/nf_conntrack_reasm.c +++ b/net/ipv6/netfilter/nf_conntrack_reasm.c @@ -63,6 +63,7 @@ struct nf_ct_frag6_queue struct inet_frag_queue q; __be32 id; /* fragment id */ + u32 user; struct in6_addr saddr; struct in6_addr daddr; -- cgit v1.2.3 From e578756c35859a459d78d8416195bc5f5ff897d0 Mon Sep 17 00:00:00 2001 From: Patrick McHardy Date: Tue, 26 Jan 2010 17:04:02 +0100 Subject: netfilter: ctnetlink: fix expectation mask dump The protocol number is not initialized, so userspace can't interpret the layer 4 data properly. Signed-off-by: Patrick McHardy --- net/netfilter/nf_conntrack_netlink.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/net/netfilter/nf_conntrack_netlink.c b/net/netfilter/nf_conntrack_netlink.c index 59d8064eb52..42f21c01a93 100644 --- a/net/netfilter/nf_conntrack_netlink.c +++ b/net/netfilter/nf_conntrack_netlink.c @@ -1437,8 +1437,9 @@ ctnetlink_exp_dump_mask(struct sk_buff *skb, struct nlattr *nest_parms; memset(&m, 0xFF, sizeof(m)); - m.src.u.all = mask->src.u.all; memcpy(&m.src.u3, &mask->src.u3, sizeof(m.src.u3)); + m.src.u.all = mask->src.u.all; + m.dst.protonum = tuple->dst.protonum; nest_parms = nla_nest_start(skb, CTA_EXPECT_MASK | NLA_F_NESTED); if (!nest_parms) -- cgit v1.2.3 From 3092ad054406f069991ca561adc74f2d9fbb6867 Mon Sep 17 00:00:00 2001 From: Zhu Yi Date: Tue, 26 Jan 2010 15:58:57 +0800 Subject: mac80211: fix NULL pointer dereference when ftrace is enabled I got below kernel oops when I try to bring down the network interface if ftrace is enabled. The root cause is drv_ampdu_action() is passed with a NULL ssn pointer in the BA session tear down case. We need to check and avoid dereferencing it in trace entry assignment. BUG: unable to handle kernel NULL pointer dereference Modules linked in: at (null) IP: [] ftrace_raw_event_drv_ampdu_action+0x10a/0x160 [mac80211] *pde = 00000000 Oops: 0000 [#1] SMP DEBUG_PAGEALLOC [...] Call Trace: [] ? ftrace_raw_event_drv_ampdu_action+0x0/0x160 [mac80211] [] ? __ieee80211_stop_rx_ba_session+0xfc/0x220 [mac80211] [] ? ieee80211_sta_tear_down_BA_sessions+0x3b/0x50 [mac80211] [] ? ieee80211_set_disassoc+0xe6/0x230 [mac80211] [] ? ieee80211_set_disassoc+0x9c/0x230 [mac80211] [] ? ieee80211_mgd_deauth+0x158/0x170 [mac80211] [] ? ieee80211_deauth+0x1b/0x20 [mac80211] [] ? __cfg80211_mlme_deauth+0xe9/0x120 [cfg80211] [] ? __cfg80211_disconnect+0x170/0x1d0 [cfg80211] Cc: Johannes Berg Cc: stable@kernel.org Signed-off-by: Zhu Yi Signed-off-by: John W. Linville --- net/mac80211/driver-trace.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/net/mac80211/driver-trace.h b/net/mac80211/driver-trace.h index ee94ea0c67e..da8497ef706 100644 --- a/net/mac80211/driver-trace.h +++ b/net/mac80211/driver-trace.h @@ -680,7 +680,7 @@ TRACE_EVENT(drv_ampdu_action, __entry->ret = ret; __entry->action = action; __entry->tid = tid; - __entry->ssn = *ssn; + __entry->ssn = ssn ? *ssn : 0; ), TP_printk( -- cgit v1.2.3 From c928febf4bc703ea542340e5a208e0445d998839 Mon Sep 17 00:00:00 2001 From: Ben Hutchings Date: Tue, 26 Jan 2010 18:27:09 +0000 Subject: starfire: clean up properly if firmware loading fails netdev_open() will return without cleaning up net device or hardware state if firmware loading fails. This results in a BUG() on a second attempt to bring the interface up, reported in , and probably has even worse effects if the driver is removed afterwards. Call netdev_close() to clean up on failure. Addresses http://bugzilla.kernel.org/show_bug.cgi?id=15091 Signed-off-by: Ben Hutchings Reported-by: Michael Moffatt Tested-by: Michael Moffatt Cc: "David S. Miller" Cc: Signed-off-by: Andrew Morton Signed-off-by: David S. Miller --- drivers/net/starfire.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) diff --git a/drivers/net/starfire.c b/drivers/net/starfire.c index 95db60adde4..f9521136a86 100644 --- a/drivers/net/starfire.c +++ b/drivers/net/starfire.c @@ -1063,7 +1063,7 @@ static int netdev_open(struct net_device *dev) if (retval) { printk(KERN_ERR "starfire: Failed to load firmware \"%s\"\n", FIRMWARE_RX); - return retval; + goto out_init; } if (fw_rx->size % 4) { printk(KERN_ERR "starfire: bogus length %zu in \"%s\"\n", @@ -1108,6 +1108,9 @@ out_tx: release_firmware(fw_tx); out_rx: release_firmware(fw_rx); +out_init: + if (retval) + netdev_close(dev); return retval; } -- cgit v1.2.3 From 7b139c83c590d4965259aad8889cbb08104b2891 Mon Sep 17 00:00:00 2001 From: Ajit Khaparde Date: Wed, 27 Jan 2010 21:56:44 +0000 Subject: be2net: Bug fix to support newer generation of BE ASIC Bug fix in be2net for newer generation of BladeEngine ASIC. Signed-off-by: Ajit Khaparde Signed-off-by: David S. Miller --- drivers/net/benet/be.h | 5 +++++ drivers/net/benet/be_cmds.h | 3 ++- drivers/net/benet/be_main.c | 25 +++++++++++++++++++++++-- 3 files changed, 30 insertions(+), 3 deletions(-) diff --git a/drivers/net/benet/be.h b/drivers/net/benet/be.h index 9fd8e5ecd5d..5bc74590c73 100644 --- a/drivers/net/benet/be.h +++ b/drivers/net/benet/be.h @@ -276,8 +276,13 @@ struct be_adapter { int link_speed; u8 port_type; u8 transceiver; + u8 generation; /* BladeEngine ASIC generation */ }; +/* BladeEngine Generation numbers */ +#define BE_GEN2 2 +#define BE_GEN3 3 + extern const struct ethtool_ops be_ethtool_ops; #define drvr_stats(adapter) (&adapter->stats.drvr_stats) diff --git a/drivers/net/benet/be_cmds.h b/drivers/net/benet/be_cmds.h index c002b8391b4..13b33c84108 100644 --- a/drivers/net/benet/be_cmds.h +++ b/drivers/net/benet/be_cmds.h @@ -164,7 +164,8 @@ struct be_cmd_req_hdr { u8 domain; /* dword 0 */ u32 timeout; /* dword 1 */ u32 request_length; /* dword 2 */ - u32 rsvd; /* dword 3 */ + u8 version; /* dword 3 */ + u8 rsvd[3]; /* dword 3 */ }; #define RESP_HDR_INFO_OPCODE_SHIFT 0 /* bits 0 - 7 */ diff --git a/drivers/net/benet/be_main.c b/drivers/net/benet/be_main.c index 33ab8c7f14f..90c5661b336 100644 --- a/drivers/net/benet/be_main.c +++ b/drivers/net/benet/be_main.c @@ -2051,6 +2051,7 @@ static void be_unmap_pci_bars(struct be_adapter *adapter) static int be_map_pci_bars(struct be_adapter *adapter) { u8 __iomem *addr; + int pcicfg_reg; addr = ioremap_nocache(pci_resource_start(adapter->pdev, 2), pci_resource_len(adapter->pdev, 2)); @@ -2064,8 +2065,13 @@ static int be_map_pci_bars(struct be_adapter *adapter) goto pci_map_err; adapter->db = addr; - addr = ioremap_nocache(pci_resource_start(adapter->pdev, 1), - pci_resource_len(adapter->pdev, 1)); + if (adapter->generation == BE_GEN2) + pcicfg_reg = 1; + else + pcicfg_reg = 0; + + addr = ioremap_nocache(pci_resource_start(adapter->pdev, pcicfg_reg), + pci_resource_len(adapter->pdev, pcicfg_reg)); if (addr == NULL) goto pci_map_err; adapter->pcicfg = addr; @@ -2162,6 +2168,7 @@ static int be_stats_init(struct be_adapter *adapter) cmd->va = pci_alloc_consistent(adapter->pdev, cmd->size, &cmd->dma); if (cmd->va == NULL) return -1; + memset(cmd->va, cmd->size, 0); return 0; } @@ -2240,6 +2247,20 @@ static int __devinit be_probe(struct pci_dev *pdev, goto rel_reg; } adapter = netdev_priv(netdev); + + switch (pdev->device) { + case BE_DEVICE_ID1: + case OC_DEVICE_ID1: + adapter->generation = BE_GEN2; + break; + case BE_DEVICE_ID2: + case OC_DEVICE_ID2: + adapter->generation = BE_GEN3; + break; + default: + adapter->generation = 0; + } + adapter->pdev = pdev; pci_set_drvdata(pdev, adapter); adapter->netdev = netdev; -- cgit v1.2.3 From aeedba8bd2cf2f6f7b45bc7853754a03bc926797 Mon Sep 17 00:00:00 2001 From: "Choi, David" Date: Wed, 27 Jan 2010 06:03:16 +0000 Subject: drivers/net: ks8851_mll ethernet network driver Hello David Miller, I fix a bug in ks8851_mll driver, which has existed since 2.6.32-rc6. >From : David J. Choi Fix a bug that the data pointers in the interrupt handler are set wrong, which is related with the 5th parameter of request_irq(). Signed-off-by : David J. Choi Signed-off-by: David S. Miller --- drivers/net/ks8851_mll.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/net/ks8851_mll.c b/drivers/net/ks8851_mll.c index c146304d8d6..c0ceebccaa4 100644 --- a/drivers/net/ks8851_mll.c +++ b/drivers/net/ks8851_mll.c @@ -854,8 +854,8 @@ static void ks_update_link_status(struct net_device *netdev, struct ks_net *ks) static irqreturn_t ks_irq(int irq, void *pw) { - struct ks_net *ks = pw; - struct net_device *netdev = ks->netdev; + struct net_device *netdev = pw; + struct ks_net *ks = netdev_priv(netdev); u16 status; /*this should be the first in IRQ handler */ -- cgit v1.2.3 From ac26d7d6aca9621f75f6954c159d2727c9c9cbd0 Mon Sep 17 00:00:00 2001 From: Alexander Duyck Date: Wed, 27 Jan 2010 15:30:39 +0000 Subject: igbvf: fix issue w/ mapped_as_page being left set after unmap This change fixes an issue in igbvf with mapped_as_page being left set after a page is unmapped which results in buffers which are mapped via map single being unmapped as page. Signed-off-by: Alexander Duyck Signed-off-by: Jeff Kirsher Signed-off-by: David S. Miller --- drivers/net/igbvf/netdev.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/net/igbvf/netdev.c b/drivers/net/igbvf/netdev.c index 297a5ddd77f..2aa71a766c3 100644 --- a/drivers/net/igbvf/netdev.c +++ b/drivers/net/igbvf/netdev.c @@ -2117,6 +2117,7 @@ static inline int igbvf_tx_map_adv(struct igbvf_adapter *adapter, /* set time_stamp *before* dma to help avoid a possible race */ buffer_info->time_stamp = jiffies; buffer_info->next_to_watch = i; + buffer_info->mapped_as_page = false; buffer_info->dma = pci_map_single(pdev, skb->data, len, PCI_DMA_TODEVICE); if (pci_dma_mapping_error(pdev, buffer_info->dma)) -- cgit v1.2.3 From ebe1b30cd441b576fb9d0b42857af3e423dd5826 Mon Sep 17 00:00:00 2001 From: John Fastabend Date: Wed, 27 Jan 2010 16:37:44 +0000 Subject: ixgbe: set the correct DCB bit for pg tx settings Set the correct bit BIT_PG_TX when tx PG settings are set. Signed-off-by: John Fastabend Acked-by: PJ Waskiewicz Signed-off-by: Jeff Kirsher Signed-off-by: David S. Miller --- drivers/net/ixgbe/ixgbe_dcb_nl.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/ixgbe/ixgbe_dcb_nl.c b/drivers/net/ixgbe/ixgbe_dcb_nl.c index 56f37f66b69..383e799c5fe 100644 --- a/drivers/net/ixgbe/ixgbe_dcb_nl.c +++ b/drivers/net/ixgbe/ixgbe_dcb_nl.c @@ -223,7 +223,7 @@ static void ixgbe_dcbnl_set_pg_bwg_cfg_tx(struct net_device *netdev, int bwg_id, if (adapter->temp_dcb_cfg.bw_percentage[0][bwg_id] != adapter->dcb_cfg.bw_percentage[0][bwg_id]) { - adapter->dcb_set_bitmap |= BIT_PG_RX; + adapter->dcb_set_bitmap |= BIT_PG_TX; adapter->dcb_set_bitmap |= BIT_RESETLINK; } } -- cgit v1.2.3 From 3ce1cc52d2e76b6a6b9d0b52b70eb181497efa50 Mon Sep 17 00:00:00 2001 From: John Fastabend Date: Wed, 27 Jan 2010 16:38:06 +0000 Subject: ixgbe: if ixgbe_copy_dcb_cfg is going to fail learn about it early Call ixgbe_copy_dcb_cfg() earlier in the ixgbe_dcbnl_set_all() so that we can learn if this is going to fail as early as possible. Previously, ixgbe_down or ixgbe_close were being called before this check and the IXGBE_RESETTING bit was being set and cleared. Worse if this failed the corresponding ixgbe_up/ndo_open would not called. Signed-off-by: John Fastabend Acked-by: PJ Waskiewicz Signed-off-by: Jeff Kirsher Signed-off-by: David S. Miller --- drivers/net/ixgbe/ixgbe_dcb_nl.c | 14 ++++++-------- 1 file changed, 6 insertions(+), 8 deletions(-) diff --git a/drivers/net/ixgbe/ixgbe_dcb_nl.c b/drivers/net/ixgbe/ixgbe_dcb_nl.c index 383e799c5fe..dd4883f642b 100644 --- a/drivers/net/ixgbe/ixgbe_dcb_nl.c +++ b/drivers/net/ixgbe/ixgbe_dcb_nl.c @@ -341,6 +341,12 @@ static u8 ixgbe_dcbnl_set_all(struct net_device *netdev) if (!adapter->dcb_set_bitmap) return DCB_NO_HW_CHG; + ret = ixgbe_copy_dcb_cfg(&adapter->temp_dcb_cfg, &adapter->dcb_cfg, + adapter->ring_feature[RING_F_DCB].indices); + + if (ret) + return DCB_NO_HW_CHG; + /* * Only take down the adapter if the configuration change * requires a reset. @@ -359,14 +365,6 @@ static u8 ixgbe_dcbnl_set_all(struct net_device *netdev) } } - ret = ixgbe_copy_dcb_cfg(&adapter->temp_dcb_cfg, &adapter->dcb_cfg, - adapter->ring_feature[RING_F_DCB].indices); - if (ret) { - if (adapter->dcb_set_bitmap & BIT_RESETLINK) - clear_bit(__IXGBE_RESETTING, &adapter->state); - return DCB_NO_HW_CHG; - } - if (adapter->dcb_cfg.pfc_mode_enable) { if ((adapter->hw.mac.type != ixgbe_mac_82598EB) && (adapter->hw.fc.current_mode != ixgbe_fc_pfc)) -- cgit v1.2.3 From b473946a0853860e13b51c28add5524741117786 Mon Sep 17 00:00:00 2001 From: stephen hemminger Date: Mon, 25 Jan 2010 23:34:15 +0000 Subject: bonding: bond_open error return value The convention for API functions in kernel is to return errno value; bond_open would return -1 if alb setup failed. The only reason that could happen is if kmalloc() failed. Signed-off-by: Stephen Hemminger Signed-off-by: David S. Miller --- drivers/net/bonding/bond_main.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/bonding/bond_main.c b/drivers/net/bonding/bond_main.c index 3f0071cfe56..efa0e41bf3e 100644 --- a/drivers/net/bonding/bond_main.c +++ b/drivers/net/bonding/bond_main.c @@ -3639,7 +3639,7 @@ static int bond_open(struct net_device *bond_dev) */ if (bond_alb_initialize(bond, (bond->params.mode == BOND_MODE_ALB))) { /* something went wrong - fail the open operation */ - return -1; + return -ENOMEM; } INIT_DELAYED_WORK(&bond->alb_work, bond_alb_monitor); -- cgit v1.2.3 From d291b9af1a1a12f59a464494900c6e0db26e2ec3 Mon Sep 17 00:00:00 2001 From: "David S. Miller" Date: Thu, 28 Jan 2010 21:36:21 -0800 Subject: be2net: Fix memset() arg ordering. Noticed by Ben Hutchings. Signed-off-by: David S. Miller --- drivers/net/benet/be_main.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/benet/be_main.c b/drivers/net/benet/be_main.c index 90c5661b336..6f2633887dc 100644 --- a/drivers/net/benet/be_main.c +++ b/drivers/net/benet/be_main.c @@ -2168,7 +2168,7 @@ static int be_stats_init(struct be_adapter *adapter) cmd->va = pci_alloc_consistent(adapter->pdev, cmd->size, &cmd->dma); if (cmd->va == NULL) return -1; - memset(cmd->va, cmd->size, 0); + memset(cmd->va, 0, cmd->size); return 0; } -- cgit v1.2.3 From 71cc1fa9f2d71eb2eba9b8e71e27cff9863e55f3 Mon Sep 17 00:00:00 2001 From: Ben Hutchings Date: Thu, 28 Jan 2010 21:37:18 -0800 Subject: cdc_ether: Partially revert "usbnet: Set link down initially ..." Commit 37e8273cd30592d3a82bcb70cbb1bdc4eaeb6b71 ("usbnet: Set link down initially for drivers that update link state") changed the initial link state in cdc_ether and other drivers based on the understanding that the devices they support generate link change interrupts. However, this is optional in the CDC Ethernet protocol, and two users have reported in that the link state for their devices remains down. Therefore, revert the change in cdc_ether. Signed-off-by: Ben Hutchings Tested-by: Avi Rozen Signed-off-by: David S. Miller --- drivers/net/usb/cdc_ether.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/usb/cdc_ether.c b/drivers/net/usb/cdc_ether.c index 21e183a83b9..4f27f022fbf 100644 --- a/drivers/net/usb/cdc_ether.c +++ b/drivers/net/usb/cdc_ether.c @@ -419,7 +419,7 @@ static int cdc_manage_power(struct usbnet *dev, int on) static const struct driver_info cdc_info = { .description = "CDC Ethernet Device", - .flags = FLAG_ETHER | FLAG_LINK_INTR, + .flags = FLAG_ETHER, // .check_connect = cdc_check_connect, .bind = cdc_bind, .unbind = usbnet_cdc_unbind, -- cgit v1.2.3 From fcafde2e6d81aa7901f9b10e6a097592f0637b79 Mon Sep 17 00:00:00 2001 From: Andrei Emeltchenko Date: Tue, 22 Dec 2009 15:58:08 +0200 Subject: Bluetooth: Remove double free of SKB pointer in L2CAP Trivial fix for double free of SKB pointer with kfree_skb to make code simplier and cleaner. Remove unused variable err. Signed-off-by: Andrei Emeltchenko Acked-by: Gustavo F. Padovan Signed-off-by: Marcel Holtmann --- net/bluetooth/l2cap.c | 11 ++++------- 1 file changed, 4 insertions(+), 7 deletions(-) diff --git a/net/bluetooth/l2cap.c b/net/bluetooth/l2cap.c index 1120cf14a54..8acc19ed9c4 100644 --- a/net/bluetooth/l2cap.c +++ b/net/bluetooth/l2cap.c @@ -3518,7 +3518,6 @@ static inline int l2cap_data_channel(struct l2cap_conn *conn, u16 cid, struct sk struct l2cap_pinfo *pi; u16 control, len; u8 tx_seq; - int err; sk = l2cap_get_chan_by_scid(&conn->chan_list, cid); if (!sk) { @@ -3570,13 +3569,11 @@ static inline int l2cap_data_channel(struct l2cap_conn *conn, u16 cid, struct sk goto drop; if (__is_iframe(control)) - err = l2cap_data_channel_iframe(sk, control, skb); + l2cap_data_channel_iframe(sk, control, skb); else - err = l2cap_data_channel_sframe(sk, control, skb); + l2cap_data_channel_sframe(sk, control, skb); - if (!err) - goto done; - break; + goto done; case L2CAP_MODE_STREAMING: control = get_unaligned_le16(skb->data); @@ -3602,7 +3599,7 @@ static inline int l2cap_data_channel(struct l2cap_conn *conn, u16 cid, struct sk else pi->expected_tx_seq = tx_seq + 1; - err = l2cap_sar_reassembly_sdu(sk, skb, control); + l2cap_sar_reassembly_sdu(sk, skb, control); goto done; -- cgit v1.2.3 From e420aba331f44de0eed6871441293a6124d566d1 Mon Sep 17 00:00:00 2001 From: Andrei Emeltchenko Date: Wed, 23 Dec 2009 13:07:14 +0200 Subject: Bluetooth: Fix memory leak in L2CAP Move skb_clone after error confition check so it is not going potentially out of the scope. Signed-off-by: Andrei Emeltchenko Acked-by: Gustavo F. Padovan Signed-off-by: Marcel Holtmann --- net/bluetooth/l2cap.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/net/bluetooth/l2cap.c b/net/bluetooth/l2cap.c index 8acc19ed9c4..400efa26ddb 100644 --- a/net/bluetooth/l2cap.c +++ b/net/bluetooth/l2cap.c @@ -1368,7 +1368,6 @@ static int l2cap_ertm_send(struct sock *sk) while ((skb = sk->sk_send_head) && (!l2cap_tx_window_full(sk)) && !(pi->conn_state & L2CAP_CONN_REMOTE_BUSY)) { - tx_skb = skb_clone(skb, GFP_ATOMIC); if (pi->remote_max_tx && bt_cb(skb)->retries == pi->remote_max_tx) { @@ -1376,6 +1375,8 @@ static int l2cap_ertm_send(struct sock *sk) break; } + tx_skb = skb_clone(skb, GFP_ATOMIC); + bt_cb(skb)->retries++; control = get_unaligned_le16(tx_skb->data + L2CAP_HDR_SIZE); -- cgit v1.2.3 From 7427847d2d044d85f478757ea03165ae3cfe87c4 Mon Sep 17 00:00:00 2001 From: Mike Frysinger Date: Mon, 14 Sep 2009 13:43:49 -0400 Subject: Bluetooth: Redo checks in IRQ handler for shared IRQ support Commit ac019360fe3 changed the irq handler logic to BUG_ON rather than returning IRQ_NONE when the incoming argument is invalid. While this works in most cases, it doesn't work when the IRQ is shared with other devices (or when DEBUG_SHIRQ is enabled). So revert the previous change and replace the warning message with a comment explaining that we want this behavior. Signed-off-by: Michael Hennerich Signed-off-by: Mike Frysinger Signed-off-by: Marcel Holtmann --- drivers/bluetooth/bluecard_cs.c | 4 +++- drivers/bluetooth/bt3c_cs.c | 4 +++- drivers/bluetooth/btuart_cs.c | 4 +++- drivers/bluetooth/dtl1_cs.c | 4 +++- 4 files changed, 12 insertions(+), 4 deletions(-) diff --git a/drivers/bluetooth/bluecard_cs.c b/drivers/bluetooth/bluecard_cs.c index 2acdc605cb4..c2cf8114471 100644 --- a/drivers/bluetooth/bluecard_cs.c +++ b/drivers/bluetooth/bluecard_cs.c @@ -503,7 +503,9 @@ static irqreturn_t bluecard_interrupt(int irq, void *dev_inst) unsigned int iobase; unsigned char reg; - BUG_ON(!info->hdev); + if (!info || !info->hdev) + /* our irq handler is shared */ + return IRQ_NONE; if (!test_bit(CARD_READY, &(info->hw_state))) return IRQ_HANDLED; diff --git a/drivers/bluetooth/bt3c_cs.c b/drivers/bluetooth/bt3c_cs.c index d814a2755cc..9f5926aaf57 100644 --- a/drivers/bluetooth/bt3c_cs.c +++ b/drivers/bluetooth/bt3c_cs.c @@ -345,7 +345,9 @@ static irqreturn_t bt3c_interrupt(int irq, void *dev_inst) int iir; irqreturn_t r = IRQ_NONE; - BUG_ON(!info->hdev); + if (!info || !info->hdev) + /* our irq handler is shared */ + return IRQ_NONE; iobase = info->p_dev->io.BasePort1; diff --git a/drivers/bluetooth/btuart_cs.c b/drivers/bluetooth/btuart_cs.c index d339464dc15..91c52309980 100644 --- a/drivers/bluetooth/btuart_cs.c +++ b/drivers/bluetooth/btuart_cs.c @@ -295,7 +295,9 @@ static irqreturn_t btuart_interrupt(int irq, void *dev_inst) int iir, lsr; irqreturn_t r = IRQ_NONE; - BUG_ON(!info->hdev); + if (!info || !info->hdev) + /* our irq handler is shared */ + return IRQ_NONE; iobase = info->p_dev->io.BasePort1; diff --git a/drivers/bluetooth/dtl1_cs.c b/drivers/bluetooth/dtl1_cs.c index 4f02a6f3c98..697591941e1 100644 --- a/drivers/bluetooth/dtl1_cs.c +++ b/drivers/bluetooth/dtl1_cs.c @@ -299,7 +299,9 @@ static irqreturn_t dtl1_interrupt(int irq, void *dev_inst) int iir, lsr; irqreturn_t r = IRQ_NONE; - BUG_ON(!info->hdev); + if (!info || !info->hdev) + /* our irq handler is shared */ + return IRQ_NONE; iobase = info->p_dev->io.BasePort1; -- cgit v1.2.3 From 9670d80a9a6e24725c4111bef5d6cc7786ad0dc5 Mon Sep 17 00:00:00 2001 From: Vikram Kandukuri Date: Wed, 6 Jan 2010 19:04:15 +0530 Subject: Bluetooth: Add DFU driver for Atheros Bluetooth chipset AR3011 Signed-off-by: Vikram Kandukuri Signed-off-by: Alicke Xu Reviewed-by: Luis R. Rodriguez Signed-off-by: Marcel Holtmann --- drivers/bluetooth/Kconfig | 13 +++- drivers/bluetooth/Makefile | 1 + drivers/bluetooth/ath3k.c | 187 +++++++++++++++++++++++++++++++++++++++++++++ 3 files changed, 200 insertions(+), 1 deletion(-) create mode 100644 drivers/bluetooth/ath3k.c diff --git a/drivers/bluetooth/Kconfig b/drivers/bluetooth/Kconfig index 652367aa654..058fbccf2f5 100644 --- a/drivers/bluetooth/Kconfig +++ b/drivers/bluetooth/Kconfig @@ -195,5 +195,16 @@ config BT_MRVL_SDIO Say Y here to compile support for Marvell BT-over-SDIO driver into the kernel or say M to compile it as module. -endmenu +config BT_ATH3K + tristate "Atheros firmware download driver" + depends on BT_HCIBTUSB + select FW_LOADER + help + Bluetooth firmware download driver. + This driver loads the firmware into the Atheros Bluetooth + chipset. + Say Y here to compile support for "Atheros firmware download driver" + into the kernel or say M to compile it as module (ath3k). + +endmenu diff --git a/drivers/bluetooth/Makefile b/drivers/bluetooth/Makefile index b3f57d2d4eb..7e5aed59812 100644 --- a/drivers/bluetooth/Makefile +++ b/drivers/bluetooth/Makefile @@ -15,6 +15,7 @@ obj-$(CONFIG_BT_HCIBTUART) += btuart_cs.o obj-$(CONFIG_BT_HCIBTUSB) += btusb.o obj-$(CONFIG_BT_HCIBTSDIO) += btsdio.o +obj-$(CONFIG_BT_ATH3K) += ath3k.o obj-$(CONFIG_BT_MRVL) += btmrvl.o obj-$(CONFIG_BT_MRVL_SDIO) += btmrvl_sdio.o diff --git a/drivers/bluetooth/ath3k.c b/drivers/bluetooth/ath3k.c new file mode 100644 index 00000000000..add9485ca5b --- /dev/null +++ b/drivers/bluetooth/ath3k.c @@ -0,0 +1,187 @@ +/* + * Copyright (c) 2008-2009 Atheros Communications Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + * + */ + + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#define VERSION "1.0" + + +static struct usb_device_id ath3k_table[] = { + /* Atheros AR3011 */ + { USB_DEVICE(0x0CF3, 0x3000) }, + { } /* Terminating entry */ +}; + +MODULE_DEVICE_TABLE(usb, ath3k_table); + +#define USB_REQ_DFU_DNLOAD 1 +#define BULK_SIZE 4096 + +struct ath3k_data { + struct usb_device *udev; + u8 *fw_data; + u32 fw_size; + u32 fw_sent; +}; + +static int ath3k_load_firmware(struct ath3k_data *data, + unsigned char *firmware, + int count) +{ + u8 *send_buf; + int err, pipe, len, size, sent = 0; + + BT_DBG("ath3k %p udev %p", data, data->udev); + + pipe = usb_sndctrlpipe(data->udev, 0); + + if ((usb_control_msg(data->udev, pipe, + USB_REQ_DFU_DNLOAD, + USB_TYPE_VENDOR, 0, 0, + firmware, 20, USB_CTRL_SET_TIMEOUT)) < 0) { + BT_ERR("Can't change to loading configuration err"); + return -EBUSY; + } + sent += 20; + count -= 20; + + send_buf = kmalloc(BULK_SIZE, GFP_ATOMIC); + if (!send_buf) { + BT_ERR("Can't allocate memory chunk for firmware"); + return -ENOMEM; + } + + while (count) { + size = min_t(uint, count, BULK_SIZE); + pipe = usb_sndbulkpipe(data->udev, 0x02); + memcpy(send_buf, firmware + sent, size); + + err = usb_bulk_msg(data->udev, pipe, send_buf, size, + &len, 3000); + + if (err || (len != size)) { + BT_ERR("Error in firmware loading err = %d," + "len = %d, size = %d", err, len, size); + goto error; + } + + sent += size; + count -= size; + } + + kfree(send_buf); + return 0; + +error: + kfree(send_buf); + return err; +} + +static int ath3k_probe(struct usb_interface *intf, + const struct usb_device_id *id) +{ + const struct firmware *firmware; + struct usb_device *udev = interface_to_usbdev(intf); + struct ath3k_data *data; + int size; + + BT_DBG("intf %p id %p", intf, id); + + if (intf->cur_altsetting->desc.bInterfaceNumber != 0) + return -ENODEV; + + data = kzalloc(sizeof(*data), GFP_KERNEL); + if (!data) + return -ENOMEM; + + data->udev = udev; + + if (request_firmware(&firmware, "ath3k-1.fw", &udev->dev) < 0) { + kfree(data); + return -EIO; + } + + size = max_t(uint, firmware->size, 4096); + data->fw_data = kmalloc(size, GFP_KERNEL); + if (!data->fw_data) { + release_firmware(firmware); + kfree(data); + return -ENOMEM; + } + + memcpy(data->fw_data, firmware->data, firmware->size); + data->fw_size = firmware->size; + data->fw_sent = 0; + release_firmware(firmware); + + usb_set_intfdata(intf, data); + if (ath3k_load_firmware(data, data->fw_data, data->fw_size)) { + usb_set_intfdata(intf, NULL); + return -EIO; + } + + return 0; +} + +static void ath3k_disconnect(struct usb_interface *intf) +{ + struct ath3k_data *data = usb_get_intfdata(intf); + + BT_DBG("ath3k_disconnect intf %p", intf); + + kfree(data->fw_data); + kfree(data); +} + +static struct usb_driver ath3k_driver = { + .name = "ath3k", + .probe = ath3k_probe, + .disconnect = ath3k_disconnect, + .id_table = ath3k_table, +}; + +static int __init ath3k_init(void) +{ + BT_INFO("Atheros AR30xx firmware driver ver %s", VERSION); + return usb_register(&ath3k_driver); +} + +static void __exit ath3k_exit(void) +{ + usb_deregister(&ath3k_driver); +} + +module_init(ath3k_init); +module_exit(ath3k_exit); + +MODULE_AUTHOR("Atheros Communications"); +MODULE_DESCRIPTION("Atheros AR30xx firmware driver"); +MODULE_VERSION(VERSION); +MODULE_LICENSE("GPL"); +MODULE_FIRMWARE("ath3k-1.fw"); -- cgit v1.2.3 From 6bf8268f9a91f1065c99503161ebd061492bebe3 Mon Sep 17 00:00:00 2001 From: Bastien Nocera Date: Wed, 20 Jan 2010 12:00:42 +0000 Subject: Bluetooth: Use the control channel for raw HID reports In commit 2da31939a42f7a676a0bc5155d6a0a39ed8451f2, support for Bluetooth hid_output_raw_report was added, but it pushes the data to the interrupt channel instead of the contol one. This patch makes hid_output_raw_report use the control channel instead. Using the interrupt channel was a mistake. Signed-off-by: Bastien Nocera Signed-off-by: Marcel Holtmann --- net/bluetooth/hidp/core.c | 70 ++++++++++++++++++++++++----------------------- 1 file changed, 36 insertions(+), 34 deletions(-) diff --git a/net/bluetooth/hidp/core.c b/net/bluetooth/hidp/core.c index 18e7f5a43dc..6cf526d06e2 100644 --- a/net/bluetooth/hidp/core.c +++ b/net/bluetooth/hidp/core.c @@ -243,6 +243,39 @@ static void hidp_input_report(struct hidp_session *session, struct sk_buff *skb) input_sync(dev); } +static int __hidp_send_ctrl_message(struct hidp_session *session, + unsigned char hdr, unsigned char *data, int size) +{ + struct sk_buff *skb; + + BT_DBG("session %p data %p size %d", session, data, size); + + if (!(skb = alloc_skb(size + 1, GFP_ATOMIC))) { + BT_ERR("Can't allocate memory for new frame"); + return -ENOMEM; + } + + *skb_put(skb, 1) = hdr; + if (data && size > 0) + memcpy(skb_put(skb, size), data, size); + + skb_queue_tail(&session->ctrl_transmit, skb); + + return 0; +} + +static inline int hidp_send_ctrl_message(struct hidp_session *session, + unsigned char hdr, unsigned char *data, int size) +{ + int err; + + err = __hidp_send_ctrl_message(session, hdr, data, size); + + hidp_schedule(session); + + return err; +} + static int hidp_queue_report(struct hidp_session *session, unsigned char *data, int size) { @@ -282,7 +315,9 @@ static int hidp_send_report(struct hidp_session *session, struct hid_report *rep static int hidp_output_raw_report(struct hid_device *hid, unsigned char *data, size_t count) { - if (hidp_queue_report(hid->driver_data, data, count)) + if (hidp_send_ctrl_message(hid->driver_data, + HIDP_TRANS_SET_REPORT | HIDP_DATA_RTYPE_FEATURE, + data, count)) return -ENOMEM; return count; } @@ -307,39 +342,6 @@ static inline void hidp_del_timer(struct hidp_session *session) del_timer(&session->timer); } -static int __hidp_send_ctrl_message(struct hidp_session *session, - unsigned char hdr, unsigned char *data, int size) -{ - struct sk_buff *skb; - - BT_DBG("session %p data %p size %d", session, data, size); - - if (!(skb = alloc_skb(size + 1, GFP_ATOMIC))) { - BT_ERR("Can't allocate memory for new frame"); - return -ENOMEM; - } - - *skb_put(skb, 1) = hdr; - if (data && size > 0) - memcpy(skb_put(skb, size), data, size); - - skb_queue_tail(&session->ctrl_transmit, skb); - - return 0; -} - -static inline int hidp_send_ctrl_message(struct hidp_session *session, - unsigned char hdr, unsigned char *data, int size) -{ - int err; - - err = __hidp_send_ctrl_message(session, hdr, data, size); - - hidp_schedule(session); - - return err; -} - static void hidp_process_handshake(struct hidp_session *session, unsigned char param) { -- cgit v1.2.3 From 55bdeed9f67a92f184e1ddcdd722e622d9dd10c6 Mon Sep 17 00:00:00 2001 From: Sathya Perla Date: Tue, 2 Feb 2010 07:48:40 -0800 Subject: be2net: use eq-id to calculate cev-isr reg offset cev-isr reg offset for each function is better calculated using (any) eq-id alloted to that function instead of using pci-func number(which does not work in some configurations...) Signed-off-by: Sathya Perla Signed-off-by: David S. Miller --- drivers/net/benet/be_main.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/benet/be_main.c b/drivers/net/benet/be_main.c index 6f2633887dc..626b76c0ebc 100644 --- a/drivers/net/benet/be_main.c +++ b/drivers/net/benet/be_main.c @@ -1350,7 +1350,7 @@ static irqreturn_t be_intx(int irq, void *dev) int isr; isr = ioread32(adapter->csr + CEV_ISR0_OFFSET + - be_pci_func(adapter) * CEV_ISR_SIZE); + (adapter->tx_eq.q.id/ 8) * CEV_ISR_SIZE); if (!isr) return IRQ_NONE; -- cgit v1.2.3 From b8a1d37c5f981cdd2e83c9fd98198832324cd57a Mon Sep 17 00:00:00 2001 From: Julia Lawall Date: Wed, 3 Feb 2010 09:31:36 +1100 Subject: kernel/cred.c: use kmem_cache_free Free memory allocated using kmem_cache_zalloc using kmem_cache_free rather than kfree. The semantic patch that makes this change is as follows: (http://coccinelle.lip6.fr/) // @@ expression x,E,c; @@ x = \(kmem_cache_alloc\|kmem_cache_zalloc\|kmem_cache_alloc_node\)(c,...) ... when != x = E when != &x ?-kfree(x) +kmem_cache_free(c,x) // Signed-off-by: Julia Lawall Acked-by: David Howells Cc: James Morris Cc: Steve Dickson Cc: Signed-off-by: Andrew Morton Signed-off-by: James Morris --- kernel/cred.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/kernel/cred.c b/kernel/cred.c index dd76cfe5f5b..1ed8ca18790 100644 --- a/kernel/cred.c +++ b/kernel/cred.c @@ -224,7 +224,7 @@ struct cred *cred_alloc_blank(void) #ifdef CONFIG_KEYS new->tgcred = kzalloc(sizeof(*new->tgcred), GFP_KERNEL); if (!new->tgcred) { - kfree(new); + kmem_cache_free(cred_jar, new); return NULL; } atomic_set(&new->tgcred->usage, 1); -- cgit v1.2.3 From f98bfbd78c37c5946cc53089da32a5f741efdeb7 Mon Sep 17 00:00:00 2001 From: Evgeniy Polyakov Date: Tue, 2 Feb 2010 15:58:48 -0800 Subject: connector: Delete buggy notification code. On Tue, Feb 02, 2010 at 02:57:14PM -0800, Greg KH (gregkh@suse.de) wrote: > > There are at least two ways to fix it: using a big cannon and a small > > one. The former way is to disable notification registration, since it is > > not used by anyone at all. Second way is to check whether calling > > process is root and its destination group is -1 (kind of priveledged > > one) before command is dispatched to workqueue. > > Well if no one is using it, removing it makes the most sense, right? > > No objection from me, care to make up a patch either way for this? Getting it is not used, let's drop support for notifications about (un)registered events from connector. Another option was to check credentials on receiving, but we can always restore it without bugs if needed, but genetlink has a wider code base and none complained, that userspace can not get notification when some other clients were (un)registered. Kudos for Sebastian Krahmer , who found a bug in the code. Signed-off-by: Evgeniy Polyakov Acked-by: Greg Kroah-Hartman Signed-off-by: David S. Miller --- drivers/connector/connector.c | 175 ------------------------------------------ include/linux/connector.h | 32 -------- 2 files changed, 207 deletions(-) diff --git a/drivers/connector/connector.c b/drivers/connector/connector.c index f06024668f9..537c29ac448 100644 --- a/drivers/connector/connector.c +++ b/drivers/connector/connector.c @@ -36,17 +36,6 @@ MODULE_LICENSE("GPL"); MODULE_AUTHOR("Evgeniy Polyakov "); MODULE_DESCRIPTION("Generic userspace <-> kernelspace connector."); -static u32 cn_idx = CN_IDX_CONNECTOR; -static u32 cn_val = CN_VAL_CONNECTOR; - -module_param(cn_idx, uint, 0); -module_param(cn_val, uint, 0); -MODULE_PARM_DESC(cn_idx, "Connector's main device idx."); -MODULE_PARM_DESC(cn_val, "Connector's main device val."); - -static DEFINE_MUTEX(notify_lock); -static LIST_HEAD(notify_list); - static struct cn_dev cdev; static int cn_already_initialized; @@ -209,54 +198,6 @@ static void cn_rx_skb(struct sk_buff *__skb) } } -/* - * Notification routing. - * - * Gets id and checks if there are notification request for it's idx - * and val. If there are such requests notify the listeners with the - * given notify event. - * - */ -static void cn_notify(struct cb_id *id, u32 notify_event) -{ - struct cn_ctl_entry *ent; - - mutex_lock(¬ify_lock); - list_for_each_entry(ent, ¬ify_list, notify_entry) { - int i; - struct cn_notify_req *req; - struct cn_ctl_msg *ctl = ent->msg; - int idx_found, val_found; - - idx_found = val_found = 0; - - req = (struct cn_notify_req *)ctl->data; - for (i = 0; i < ctl->idx_notify_num; ++i, ++req) { - if (id->idx >= req->first && - id->idx < req->first + req->range) { - idx_found = 1; - break; - } - } - - for (i = 0; i < ctl->val_notify_num; ++i, ++req) { - if (id->val >= req->first && - id->val < req->first + req->range) { - val_found = 1; - break; - } - } - - if (idx_found && val_found) { - struct cn_msg m = { .ack = notify_event, }; - - memcpy(&m.id, id, sizeof(m.id)); - cn_netlink_send(&m, ctl->group, GFP_KERNEL); - } - } - mutex_unlock(¬ify_lock); -} - /* * Callback add routing - adds callback with given ID and name. * If there is registered callback with the same ID it will not be added. @@ -276,8 +217,6 @@ int cn_add_callback(struct cb_id *id, char *name, if (err) return err; - cn_notify(id, 0); - return 0; } EXPORT_SYMBOL_GPL(cn_add_callback); @@ -295,111 +234,9 @@ void cn_del_callback(struct cb_id *id) struct cn_dev *dev = &cdev; cn_queue_del_callback(dev->cbdev, id); - cn_notify(id, 1); } EXPORT_SYMBOL_GPL(cn_del_callback); -/* - * Checks two connector's control messages to be the same. - * Returns 1 if they are the same or if the first one is corrupted. - */ -static int cn_ctl_msg_equals(struct cn_ctl_msg *m1, struct cn_ctl_msg *m2) -{ - int i; - struct cn_notify_req *req1, *req2; - - if (m1->idx_notify_num != m2->idx_notify_num) - return 0; - - if (m1->val_notify_num != m2->val_notify_num) - return 0; - - if (m1->len != m2->len) - return 0; - - if ((m1->idx_notify_num + m1->val_notify_num) * sizeof(*req1) != - m1->len) - return 1; - - req1 = (struct cn_notify_req *)m1->data; - req2 = (struct cn_notify_req *)m2->data; - - for (i = 0; i < m1->idx_notify_num; ++i) { - if (req1->first != req2->first || req1->range != req2->range) - return 0; - req1++; - req2++; - } - - for (i = 0; i < m1->val_notify_num; ++i) { - if (req1->first != req2->first || req1->range != req2->range) - return 0; - req1++; - req2++; - } - - return 1; -} - -/* - * Main connector device's callback. - * - * Used for notification of a request's processing. - */ -static void cn_callback(struct cn_msg *msg, struct netlink_skb_parms *nsp) -{ - struct cn_ctl_msg *ctl; - struct cn_ctl_entry *ent; - u32 size; - - if (msg->len < sizeof(*ctl)) - return; - - ctl = (struct cn_ctl_msg *)msg->data; - - size = (sizeof(*ctl) + ((ctl->idx_notify_num + - ctl->val_notify_num) * - sizeof(struct cn_notify_req))); - - if (msg->len != size) - return; - - if (ctl->len + sizeof(*ctl) != msg->len) - return; - - /* - * Remove notification. - */ - if (ctl->group == 0) { - struct cn_ctl_entry *n; - - mutex_lock(¬ify_lock); - list_for_each_entry_safe(ent, n, ¬ify_list, notify_entry) { - if (cn_ctl_msg_equals(ent->msg, ctl)) { - list_del(&ent->notify_entry); - kfree(ent); - } - } - mutex_unlock(¬ify_lock); - - return; - } - - size += sizeof(*ent); - - ent = kzalloc(size, GFP_KERNEL); - if (!ent) - return; - - ent->msg = (struct cn_ctl_msg *)(ent + 1); - - memcpy(ent->msg, ctl, size - sizeof(*ent)); - - mutex_lock(¬ify_lock); - list_add(&ent->notify_entry, ¬ify_list); - mutex_unlock(¬ify_lock); -} - static int cn_proc_show(struct seq_file *m, void *v) { struct cn_queue_dev *dev = cdev.cbdev; @@ -437,11 +274,8 @@ static const struct file_operations cn_file_ops = { static int __devinit cn_init(void) { struct cn_dev *dev = &cdev; - int err; dev->input = cn_rx_skb; - dev->id.idx = cn_idx; - dev->id.val = cn_val; dev->nls = netlink_kernel_create(&init_net, NETLINK_CONNECTOR, CN_NETLINK_USERS + 0xf, @@ -457,14 +291,6 @@ static int __devinit cn_init(void) cn_already_initialized = 1; - err = cn_add_callback(&dev->id, "connector", &cn_callback); - if (err) { - cn_already_initialized = 0; - cn_queue_free_dev(dev->cbdev); - netlink_kernel_release(dev->nls); - return -EINVAL; - } - proc_net_fops_create(&init_net, "connector", S_IRUGO, &cn_file_ops); return 0; @@ -478,7 +304,6 @@ static void __devexit cn_fini(void) proc_net_remove(&init_net, "connector"); - cn_del_callback(&dev->id); cn_queue_free_dev(dev->cbdev); netlink_kernel_release(dev->nls); } diff --git a/include/linux/connector.h b/include/linux/connector.h index 72ba63eb83c..3a779ffba60 100644 --- a/include/linux/connector.h +++ b/include/linux/connector.h @@ -24,9 +24,6 @@ #include -#define CN_IDX_CONNECTOR 0xffffffff -#define CN_VAL_CONNECTOR 0xffffffff - /* * Process Events connector unique ids -- used for message routing */ @@ -75,30 +72,6 @@ struct cn_msg { __u8 data[0]; }; -/* - * Notify structure - requests notification about - * registering/unregistering idx/val in range [first, first+range]. - */ -struct cn_notify_req { - __u32 first; - __u32 range; -}; - -/* - * Main notification control message - * *_notify_num - number of appropriate cn_notify_req structures after - * this struct. - * group - notification receiver's idx. - * len - total length of the attached data. - */ -struct cn_ctl_msg { - __u32 idx_notify_num; - __u32 val_notify_num; - __u32 group; - __u32 len; - __u8 data[0]; -}; - #ifdef __KERNEL__ #include @@ -151,11 +124,6 @@ struct cn_callback_entry { u32 seq, group; }; -struct cn_ctl_entry { - struct list_head notify_entry; - struct cn_ctl_msg *msg; -}; - struct cn_dev { struct cb_id id; -- cgit v1.2.3 From 859ddf09743a8cc680af33f7259ccd0fd36bfe9d Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Tue, 2 Feb 2010 13:43:58 -0800 Subject: idr: fix a critical misallocation bug Eric Paris located a bug in idr. With IDR_BITS of 6, it grows to three layers when id 4096 is first allocated. When that happens, idr wraps incorrectly and searches the idr array ignoring the high bits. The following test code from Eric demonstrates the bug nicely. #include #include #include static DEFINE_IDR(test_idr); int init_module(void) { int ret, forty95, forty96; void *addr; /* add 2 entries both with 4095 as the start address */ again1: if (!idr_pre_get(&test_idr, GFP_KERNEL)) return -ENOMEM; ret = idr_get_new_above(&test_idr, (void *)4095, 4095, &forty95); if (ret) { if (ret == -EAGAIN) goto again1; return ret; } if (forty95 != 4095) printk(KERN_ERR "hmmm, forty95=%d\n", forty95); again2: if (!idr_pre_get(&test_idr, GFP_KERNEL)) return -ENOMEM; ret = idr_get_new_above(&test_idr, (void *)4096, 4095, &forty96); if (ret) { if (ret == -EAGAIN) goto again2; return ret; } if (forty96 != 4096) printk(KERN_ERR "hmmm, forty96=%d\n", forty96); /* try to find the 2 entries, noticing that 4096 broke */ addr = idr_find(&test_idr, forty95); if ((int)addr != forty95) printk(KERN_ERR "hmmm, after find forty95=%d addr=%d\n", forty95, (int)addr); addr = idr_find(&test_idr, forty96); if ((int)addr != forty96) printk(KERN_ERR "hmmm, after find forty96=%d addr=%d\n", forty96, (int)addr); /* really weird, the entry which should be at 4096 is actually at 0!! */ addr = idr_find(&test_idr, 0); if ((int)addr) printk(KERN_ERR "found an entry at id=0 for addr=%d\n", (int)addr); idr_remove(&test_idr, forty95); idr_remove(&test_idr, forty96); return 0; } void cleanup_module(void) { } MODULE_AUTHOR("Eric Paris "); MODULE_DESCRIPTION("Simple idr test"); MODULE_LICENSE("GPL"); This happens because when sub_alloc() back tracks it doesn't always do it step-by-step while the over-the-limit detection assumes step-by-step backtracking. The logic in sub_alloc() looks like the following. restart: clear pa[top level + 1] for end cond detection l = top level while (true) { search for empty slot at this level if (not found) { push id to the next possible value l++ A: if (pa[l] is clear) failed, return asking caller to grow the tree if (going up 1 level gives more slots to search) continue the while loop above with the incremented l else C: goto restart } adjust id accordingly to the found slot if (l == 0) return found id; create lower level if not there yet record pa[l] and l-- } Test A is the fail exit condition but this assumes that failure is propagated upwared one level at a time but the B optimization path breaks the assumption and restarts the whole thing with a start value which is above the possible limit with the current layers. sub_alloc() assumes the start id value is inside the limit when called and test A is the only exit condition check, so it ends up searching for empty slot while ignoring high set bit. So, for 4095->4096 test, level0 search fails but pa[1] contains a valid pointer. However, going up 1 level wouldn't give any more empty slot so it takes C and when the whole thing restarts nobody notices the high bit set beyond the top level. This patch fixes the bug by changing the fail exit condition check to full id limit check. Based-on-patch-from: Eric Paris Reported-by: Eric Paris Signed-off-by: Tejun Heo Cc: Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- lib/idr.c | 7 +++---- 1 file changed, 3 insertions(+), 4 deletions(-) diff --git a/lib/idr.c b/lib/idr.c index 1cac726c44b..ba7d37cf784 100644 --- a/lib/idr.c +++ b/lib/idr.c @@ -140,8 +140,7 @@ static int sub_alloc(struct idr *idp, int *starting_id, struct idr_layer **pa) id = *starting_id; restart: p = idp->top; - l = idp->layers; - pa[l--] = NULL; + l = p->layer; while (1) { /* * We run around this while until we reach the leaf node... @@ -155,8 +154,8 @@ static int sub_alloc(struct idr *idp, int *starting_id, struct idr_layer **pa) oid = id; id = (id | ((1 << (IDR_BITS * l)) - 1)) + 1; - /* if already at the top layer, we need to grow */ - if (!(p = pa[l])) { + /* did id go over the limit? */ + if (id >= (1 << (idp->layers * IDR_BITS))) { *starting_id = id; return IDR_NEED_TO_GROW; } -- cgit v1.2.3 From b3cb53721890879d7bde31f5f9eefd4edf41ab64 Mon Sep 17 00:00:00 2001 From: Alberto Panizzo Date: Tue, 2 Feb 2010 13:43:59 -0800 Subject: mx3fb: some debug and initialisation fixes Fix the kernel oops when dev_dbg is called with mx3_fbi->txd == NULL Fix the late initialisation of mx3fb->backlight_level. If not, in the chain of function started by init_fb_chan(), in __blank() call sdc_set_brightness(mx3fb, mx3fb->backlight_level) that will shut down the CONTRAST PWM output. Signed-off-by: Alberto Panizzo Acked-by: Guennadi Liakhovetski gmx.de> Cc: Sascha Hauer Cc: Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/video/mx3fb.c | 12 ++++++++---- 1 file changed, 8 insertions(+), 4 deletions(-) diff --git a/drivers/video/mx3fb.c b/drivers/video/mx3fb.c index 054ef29be47..772ba3f45e6 100644 --- a/drivers/video/mx3fb.c +++ b/drivers/video/mx3fb.c @@ -324,8 +324,11 @@ static void sdc_enable_channel(struct mx3fb_info *mx3_fbi) unsigned long flags; dma_cookie_t cookie; - dev_dbg(mx3fb->dev, "mx3fbi %p, desc %p, sg %p\n", mx3_fbi, - to_tx_desc(mx3_fbi->txd), to_tx_desc(mx3_fbi->txd)->sg); + if (mx3_fbi->txd) + dev_dbg(mx3fb->dev, "mx3fbi %p, desc %p, sg %p\n", mx3_fbi, + to_tx_desc(mx3_fbi->txd), to_tx_desc(mx3_fbi->txd)->sg); + else + dev_dbg(mx3fb->dev, "mx3fbi %p, txd = NULL\n", mx3_fbi); /* This enables the channel */ if (mx3_fbi->cookie < 0) { @@ -646,6 +649,7 @@ static int sdc_set_global_alpha(struct mx3fb_data *mx3fb, bool enable, uint8_t a static void sdc_set_brightness(struct mx3fb_data *mx3fb, uint8_t value) { + dev_dbg(mx3fb->dev, "%s: value = %d\n", __func__, value); /* This might be board-specific */ mx3fb_write_reg(mx3fb, 0x03000000UL | value << 16, SDC_PWM_CTRL); return; @@ -1486,12 +1490,12 @@ static int mx3fb_probe(struct platform_device *pdev) goto ersdc0; } + mx3fb->backlight_level = 255; + ret = init_fb_chan(mx3fb, to_idmac_chan(chan)); if (ret < 0) goto eisdc0; - mx3fb->backlight_level = 255; - return 0; eisdc0: -- cgit v1.2.3 From f4b5162820de60204afa5c8639335f4931b7fb0c Mon Sep 17 00:00:00 2001 From: Sergey Matyukevich Date: Tue, 2 Feb 2010 13:43:59 -0800 Subject: rtc-fm3130: add missing braces Add missing braces for multiline 'if' statements in fm3130_probe. Signed-off-by: Sergey Matyukevich Signed-off-by: Alessandro Zummo Cc: Sergey Lapin Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/rtc/rtc-fm3130.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) diff --git a/drivers/rtc/rtc-fm3130.c b/drivers/rtc/rtc-fm3130.c index 3a7be11cc6b..812c6675508 100644 --- a/drivers/rtc/rtc-fm3130.c +++ b/drivers/rtc/rtc-fm3130.c @@ -376,20 +376,22 @@ static int __devinit fm3130_probe(struct i2c_client *client, } /* Disabling calibration mode */ - if (fm3130->regs[FM3130_RTC_CONTROL] & FM3130_RTC_CONTROL_BIT_CAL) + if (fm3130->regs[FM3130_RTC_CONTROL] & FM3130_RTC_CONTROL_BIT_CAL) { i2c_smbus_write_byte_data(client, FM3130_RTC_CONTROL, fm3130->regs[FM3130_RTC_CONTROL] & ~(FM3130_RTC_CONTROL_BIT_CAL)); dev_warn(&client->dev, "Disabling calibration mode!\n"); + } /* Disabling read and write modes */ if (fm3130->regs[FM3130_RTC_CONTROL] & FM3130_RTC_CONTROL_BIT_WRITE || - fm3130->regs[FM3130_RTC_CONTROL] & FM3130_RTC_CONTROL_BIT_READ) + fm3130->regs[FM3130_RTC_CONTROL] & FM3130_RTC_CONTROL_BIT_READ) { i2c_smbus_write_byte_data(client, FM3130_RTC_CONTROL, fm3130->regs[FM3130_RTC_CONTROL] & ~(FM3130_RTC_CONTROL_BIT_READ | FM3130_RTC_CONTROL_BIT_WRITE)); dev_warn(&client->dev, "Disabling READ or WRITE mode!\n"); + } /* oscillator off? turn it on, so clock can tick. */ if (fm3130->regs[FM3130_CAL_CONTROL] & FM3130_CAL_CONTROL_BIT_nOSCEN) -- cgit v1.2.3 From bc173f7092c76a7967f135c2b3a54052ad99733b Mon Sep 17 00:00:00 2001 From: Randy Dunlap Date: Tue, 2 Feb 2010 13:44:01 -0800 Subject: kfifo: fix kernel-doc notation Fix kfifo kernel-doc warnings: Warning(kernel/kfifo.c:361): No description found for parameter 'total' Warning(kernel/kfifo.c:402): bad line: @ @lenout: pointer to output variable with copied data Warning(kernel/kfifo.c:412): No description found for parameter 'lenout' Signed-off-by: Randy Dunlap Cc: Stefani Seibold Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- kernel/kfifo.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/kernel/kfifo.c b/kernel/kfifo.c index 32c5c15d750..498cabba225 100644 --- a/kernel/kfifo.c +++ b/kernel/kfifo.c @@ -349,6 +349,7 @@ EXPORT_SYMBOL(__kfifo_from_user_n); * @fifo: the fifo to be used. * @from: pointer to the data to be added. * @len: the length of the data to be added. + * @total: the actual returned data length. * * This function copies at most @len bytes from the @from into the * FIFO depending and returns -EFAULT/0. @@ -399,7 +400,7 @@ EXPORT_SYMBOL(__kfifo_to_user_n); * @fifo: the fifo to be used. * @to: where the data must be copied. * @len: the size of the destination buffer. - @ @lenout: pointer to output variable with copied data + * @lenout: pointer to output variable with copied data * * This function copies at most @len bytes from the FIFO into the * @to buffer and 0 or -EFAULT. -- cgit v1.2.3 From 931e80e4b3263db75c8e34f078d22f11bbabd3a3 Mon Sep 17 00:00:00 2001 From: anfei zhou Date: Tue, 2 Feb 2010 13:44:02 -0800 Subject: mm: flush dcache before writing into page to avoid alias The cache alias problem will happen if the changes of user shared mapping is not flushed before copying, then user and kernel mapping may be mapped into two different cache line, it is impossible to guarantee the coherence after iov_iter_copy_from_user_atomic. So the right steps should be: flush_dcache_page(page); kmap_atomic(page); write to page; kunmap_atomic(page); flush_dcache_page(page); More precisely, we might create two new APIs flush_dcache_user_page and flush_dcache_kern_page to replace the two flush_dcache_page accordingly. Here is a snippet tested on omap2430 with VIPT cache, and I think it is not ARM-specific: int val = 0x11111111; fd = open("abc", O_RDWR); addr = mmap(NULL, 4096, PROT_READ|PROT_WRITE, MAP_SHARED, fd, 0); *(addr+0) = 0x44444444; tmp = *(addr+0); *(addr+1) = 0x77777777; write(fd, &val, sizeof(int)); close(fd); The results are not always 0x11111111 0x77777777 at the beginning as expected. Sometimes we see 0x44444444 0x77777777. Signed-off-by: Anfei Cc: Russell King Cc: Miklos Szeredi Cc: Nick Piggin Cc: Cc: Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- fs/fuse/file.c | 3 +++ mm/filemap.c | 3 +++ 2 files changed, 6 insertions(+) diff --git a/fs/fuse/file.c b/fs/fuse/file.c index c18913a777a..a9f5e137f1d 100644 --- a/fs/fuse/file.c +++ b/fs/fuse/file.c @@ -828,6 +828,9 @@ static ssize_t fuse_fill_write_pages(struct fuse_req *req, if (!page) break; + if (mapping_writably_mapped(mapping)) + flush_dcache_page(page); + pagefault_disable(); tmp = iov_iter_copy_from_user_atomic(page, ii, offset, bytes); pagefault_enable(); diff --git a/mm/filemap.c b/mm/filemap.c index e3736923220..698ea80f210 100644 --- a/mm/filemap.c +++ b/mm/filemap.c @@ -2232,6 +2232,9 @@ again: if (unlikely(status)) break; + if (mapping_writably_mapped(mapping)) + flush_dcache_page(page); + pagefault_disable(); copied = iov_iter_copy_from_user_atomic(page, i, offset, bytes); pagefault_enable(); -- cgit v1.2.3 From 325fda71d0badc1073dc59f12a948f24ff05796a Mon Sep 17 00:00:00 2001 From: KAMEZAWA Hiroyuki Date: Tue, 2 Feb 2010 13:44:05 -0800 Subject: devmem: check vmalloc address on kmem read/write Otherwise vmalloc_to_page() will BUG(). This also makes the kmem read/write implementation aligned with mem(4): "References to nonexistent locations cause errors to be returned." Here we return -ENXIO (inspired by Hugh) if no bytes have been transfered to/from user space, otherwise return partial read/write results. Signed-off-by: KAMEZAWA Hiroyuki Signed-off-by: Wu Fengguang Cc: Greg Kroah-Hartman Cc: Hugh Dickins Cc: Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/char/mem.c | 28 ++++++++++++++++++---------- 1 file changed, 18 insertions(+), 10 deletions(-) diff --git a/drivers/char/mem.c b/drivers/char/mem.c index be832b6f827..1fd4b110d81 100644 --- a/drivers/char/mem.c +++ b/drivers/char/mem.c @@ -395,6 +395,7 @@ static ssize_t read_kmem(struct file *file, char __user *buf, unsigned long p = *ppos; ssize_t low_count, read, sz; char * kbuf; /* k-addr because vread() takes vmlist_lock rwlock */ + int err = 0; read = 0; if (p < (unsigned long) high_memory) { @@ -441,12 +442,16 @@ static ssize_t read_kmem(struct file *file, char __user *buf, return -ENOMEM; while (count > 0) { sz = size_inside_page(p, count); + if (!is_vmalloc_or_module_addr((void *)p)) { + err = -ENXIO; + break; + } sz = vread(kbuf, (char *)p, sz); if (!sz) break; if (copy_to_user(buf, kbuf, sz)) { - free_page((unsigned long)kbuf); - return -EFAULT; + err = -EFAULT; + break; } count -= sz; buf += sz; @@ -455,8 +460,8 @@ static ssize_t read_kmem(struct file *file, char __user *buf, } free_page((unsigned long)kbuf); } - *ppos = p; - return read; + *ppos = p; + return read ? read : err; } @@ -520,6 +525,7 @@ static ssize_t write_kmem(struct file * file, const char __user * buf, ssize_t wrote = 0; ssize_t virtr = 0; char * kbuf; /* k-addr because vwrite() takes vmlist_lock rwlock */ + int err = 0; if (p < (unsigned long) high_memory) { unsigned long to_write = min_t(unsigned long, count, @@ -540,12 +546,14 @@ static ssize_t write_kmem(struct file * file, const char __user * buf, unsigned long sz = size_inside_page(p, count); unsigned long n; + if (!is_vmalloc_or_module_addr((void *)p)) { + err = -ENXIO; + break; + } n = copy_from_user(kbuf, buf, sz); if (n) { - if (wrote + virtr) - break; - free_page((unsigned long)kbuf); - return -EFAULT; + err = -EFAULT; + break; } sz = vwrite(kbuf, (char *)p, sz); count -= sz; @@ -556,8 +564,8 @@ static ssize_t write_kmem(struct file * file, const char __user * buf, free_page((unsigned long)kbuf); } - *ppos = p; - return virtr + wrote; + *ppos = p; + return virtr + wrote ? : err; } #endif -- cgit v1.2.3 From c85e9a97c4102ce2e83112da850d838cfab5ab13 Mon Sep 17 00:00:00 2001 From: Wu Fengguang Date: Tue, 2 Feb 2010 13:44:06 -0800 Subject: devmem: fix kmem write bug on memory holes write_kmem() used to assume vwrite() always return the full buffer length. However now vwrite() could return 0 to indicate memory hole. This creates a bug that "buf" is not advanced accordingly. Fix it to simply ignore the return value, hence the memory hole. Signed-off-by: Wu Fengguang Cc: Andi Kleen Cc: Benjamin Herrenschmidt Cc: Christoph Lameter Cc: Ingo Molnar Cc: Tejun Heo Cc: Nick Piggin Cc: KAMEZAWA Hiroyuki Cc: Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/char/mem.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/char/mem.c b/drivers/char/mem.c index 1fd4b110d81..48788db4e28 100644 --- a/drivers/char/mem.c +++ b/drivers/char/mem.c @@ -555,7 +555,7 @@ static ssize_t write_kmem(struct file * file, const char __user * buf, err = -EFAULT; break; } - sz = vwrite(kbuf, (char *)p, sz); + vwrite(kbuf, (char *)p, sz); count -= sz; buf += sz; virtr += sz; -- cgit v1.2.3 From 99cf611613f8826f52c156810bfb9e34c71d193a Mon Sep 17 00:00:00 2001 From: Richard Kennedy Date: Tue, 2 Feb 2010 13:44:07 -0800 Subject: get_maintainer.pl: teach git log to use --no-color When git has been set to always use color in .gitconfig then I get the warning message Bad divisor in main::vcs_assign: 0 This is caused by vcs_file_signoffs not matching any commits due to the pattern not understand the colour codes. Fix this by telling git log to never use colour. Signed-off-by: Richard Kennedy Acked-by: Joe Perches Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- scripts/get_maintainer.pl | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/scripts/get_maintainer.pl b/scripts/get_maintainer.pl index 090f2483970..2f3230db7ff 100755 --- a/scripts/get_maintainer.pl +++ b/scripts/get_maintainer.pl @@ -74,8 +74,8 @@ my %VCS_cmds; my %VCS_cmds_git = ( "execute_cmd" => \&git_execute_cmd, "available" => '(which("git") ne "") && (-d ".git")', - "find_signers_cmd" => "git log --since=\$email_git_since -- \$file", - "find_commit_signers_cmd" => "git log -1 \$commit", + "find_signers_cmd" => "git log --no-color --since=\$email_git_since -- \$file", + "find_commit_signers_cmd" => "git log --no-color -1 \$commit", "blame_range_cmd" => "git blame -l -L \$diff_start,+\$diff_length \$file", "blame_file_cmd" => "git blame -l \$file", "commit_pattern" => "^commit [0-9a-f]{40,40}", -- cgit v1.2.3 From ef2b9b054580ef835078d8aa411bd06542cd5c1c Mon Sep 17 00:00:00 2001 From: Hui Zhu Date: Tue, 2 Feb 2010 13:44:09 -0800 Subject: markup_oops.pl: fix $func_offset error with x86_64 When I use markup_oops.pl parse a x8664 oops, I got: objdump: --start-address: bad number: NaN No matching code found This is because: main::(./m.pl:228): open(FILE, "objdump -dS --adjust-vma=$vmaoffset --start-address=$decodestart --stop-address=$decodestop $filename |") || die "Cannot start objdump"; DB<3> p $decodestart NaN This NaN is from: main::(./m.pl:176): my $decodestart = Math::BigInt->from_hex("0x$target") - Math::BigInt->from_hex("0x$func_offset"); DB<2> p $func_offset 0x175 There is already a "0x" in $func_offset, another 0x makes it a NaN. The $func_offset is from line: if ($line =~ /RIP: 0010:\[\<[0-9a-f]+\>\] \[\<[0-9a-f]+\>\] ([a-zA-Z0-9\_]+)\+(0x[0-9a-f]+)\/0x[a-f0-9]/) { $function = $1; $func_offset = $2; } I make a patch to change "(0x[0-9a-f]+)\/0x[a-f0-9]/)" to "0x([0-9a-f]+)\/0x[a-f0-9]/)". Signed-off-by: Hui Zhu Cc: Arjan van de Ven Cc: Michal Marek Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- scripts/markup_oops.pl | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/scripts/markup_oops.pl b/scripts/markup_oops.pl index ce3e40b01e4..e950f9cde01 100644 --- a/scripts/markup_oops.pl +++ b/scripts/markup_oops.pl @@ -158,7 +158,7 @@ while () { $function = $1; $func_offset = $2; } - if ($line =~ /RIP: 0010:\[\<[0-9a-f]+\>\] \[\<[0-9a-f]+\>\] ([a-zA-Z0-9\_]+)\+(0x[0-9a-f]+)\/0x[a-f0-9]/) { + if ($line =~ /RIP: 0010:\[\<[0-9a-f]+\>\] \[\<[0-9a-f]+\>\] ([a-zA-Z0-9\_]+)\+0x([0-9a-f]+)\/0x[a-f0-9]/) { $function = $1; $func_offset = $2; } -- cgit v1.2.3 From 4528fd0595847c2078b59f24800e751c2d6b7e41 Mon Sep 17 00:00:00 2001 From: Li Zefan Date: Tue, 2 Feb 2010 13:44:10 -0800 Subject: cgroups: fix to return errno in a failure path In cgroup_create(), if alloc_css_id() returns failure, the errno is not propagated to userspace, so mkdir will fail silently. To trigger this bug, we mount blkio (or memory subsystem), and create more then 65534 cgroups. (The number of cgroups is limited to 65535 if a subsystem has use_id == 1) # mount -t cgroup -o blkio xxx /mnt # for ((i = 0; i < 65534; i++)); do mkdir /mnt/$i; done # mkdir /mnt/65534 (should return ENOSPC) # Signed-off-by: Li Zefan Acked-by: Serge Hallyn Acked-by: Paul Menage Acked-by: KAMEZAWA Hiroyuki Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- kernel/cgroup.c | 7 +++++-- 1 file changed, 5 insertions(+), 2 deletions(-) diff --git a/kernel/cgroup.c b/kernel/cgroup.c index 1fbcc748044..aa3bee56644 100644 --- a/kernel/cgroup.c +++ b/kernel/cgroup.c @@ -2936,14 +2936,17 @@ static long cgroup_create(struct cgroup *parent, struct dentry *dentry, for_each_subsys(root, ss) { struct cgroup_subsys_state *css = ss->create(ss, cgrp); + if (IS_ERR(css)) { err = PTR_ERR(css); goto err_destroy; } init_cgroup_css(css, ss, cgrp); - if (ss->use_id) - if (alloc_css_id(ss, parent, cgrp)) + if (ss->use_id) { + err = alloc_css_id(ss, parent, cgrp); + if (err) goto err_destroy; + } /* At error, ->destroy() callback has to free assigned ID. */ } -- cgit v1.2.3 From 1ec562035ba64e724652cb12b8a770b3906e9bf5 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Uwe=20Kleine-K=C3=B6nig?= Date: Tue, 2 Feb 2010 13:44:10 -0800 Subject: imxfb: correct location of callbacks in suspend and resume MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit The probe function passes a pointer to a struct fb_info to platform_set_drvdata(), so don't interpret the return value of platform_get_drvdata() as a pointer to struct imxfb_info. The original imxfb_info *fbi backlight_power was NULL but in imxfb_suspend it was 4 resulting in an oops as imxfb_suspend calls imxfb_disable_controller(fbi) which in turn has if (fbi->backlight_power) fbi->backlight_power(0); Signed-off-by: Uwe Kleine-König Acked-by: Sascha Hauer Cc: Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/video/imxfb.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) diff --git a/drivers/video/imxfb.c b/drivers/video/imxfb.c index 66358fa825f..b4b6deceed1 100644 --- a/drivers/video/imxfb.c +++ b/drivers/video/imxfb.c @@ -593,7 +593,8 @@ static int imxfb_activate_var(struct fb_var_screeninfo *var, struct fb_info *inf */ static int imxfb_suspend(struct platform_device *dev, pm_message_t state) { - struct imxfb_info *fbi = platform_get_drvdata(dev); + struct fb_info *info = platform_get_drvdata(dev); + struct imxfb_info *fbi = info->par; pr_debug("%s\n", __func__); @@ -603,7 +604,8 @@ static int imxfb_suspend(struct platform_device *dev, pm_message_t state) static int imxfb_resume(struct platform_device *dev) { - struct imxfb_info *fbi = platform_get_drvdata(dev); + struct fb_info *info = platform_get_drvdata(dev); + struct imxfb_info *fbi = info->par; pr_debug("%s\n", __func__); -- cgit v1.2.3 From 03eac7bb882a75e6ee5705288f7ec36ad2e7d0d5 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Richard=20R=C3=B6jfors?= Date: Tue, 2 Feb 2010 13:44:12 -0800 Subject: uartlite: fix crash when using as console MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Move the ulite_console_setup to the .devinit section since it might be called on probe, which is in devinit. Fixes the crash below where the uartlite hw is probed after the .init section is freed from the kernel. uartlite: ttyUL0 at MMIO 0xc8000100 (irq = 30) is a uartlite BUG: unable to handle kernel NULL pointer dereference at (null) IP: [] ulite_console_setup+0x6f/0xa8 *pdpt = 0000000036fb0001 *pde = 0000000000000000 Oops: 0000 [#1] PREEMPT SMP last sysfs file: /sys/devices/pci0000:00/0000:00:1f.1/host0/uevent Modules linked in: puffin(+) serio_raw Pid: 151, comm: modprobe Not tainted (2.6.31.5-1.0.b1-b1 #1) POULSBO EIP: 0060:[] EFLAGS: 00010246 CPU: 0 EIP is at ulite_console_setup+0x6f/0xa8 EAX: c16ec824 EBX: c16ec824 ECX: c176719f EDX: 00000000 ESI: 00000000 EDI: c17b42c4 EBP: f6fd1cf0 ESP: f6fd1cd8 DS: 007b ES: 007b FS: 00d8 GS: 0033 SS: 0068 Process modprobe (pid: 151, ti=f6fd0000 task=f6fa1020 task.ti=f6fd0000) Stack: c1031f51 00000000 00000000 00000246 c182237c f7742000 f6fd1d5c c11fd316 <0> c16ec85c f77420d4 0000001e 00000000 00000000 c1633e78 4f494d4d 63783020 <0> 30303038 00303031 f6fd1d3c c10e0786 f6fd1d48 00000000 f6fd1d48 00000000 Call Trace: [] ? register_console+0xf6/0x1fc [] ? uart_add_one_port+0x237/0x2bb [] ? sysfs_add_one+0x13/0xd3 [] ? sysfs_do_create_link+0xba/0xfc [] ? ulite_probe+0x198/0x1eb [] ? platform_drv_probe+0xc/0xe [] ? driver_probe_device+0x79/0x105 [] ? __device_attach+0x28/0x30 [] ? bus_for_each_drv+0x3d/0x67 [] ? device_attach+0x44/0x58 [] ? __device_attach+0x0/0x30 [] ? bus_probe_device+0x1f/0x34 [] ? device_add+0x385/0x4c0 [] ? _write_unlock+0x8/0x1f [] ? platform_device_add+0xd9/0x11c [] ? mfd_add_devices+0x165/0x1bc [] ? puffin_probe+0x2d0/0x390 [puffin] [] ? pci_match_device+0xa0/0xa7 [] ? local_pci_probe+0xe/0x10 [] ? pci_device_probe+0x43/0x66 [] ? driver_probe_device+0x79/0x105 [] ? __driver_attach+0x43/0x5f [] ? bus_for_each_dev+0x3d/0x67 [] ? driver_attach+0x14/0x16 [] ? __driver_attach+0x0/0x5f [] ? bus_add_driver+0xf9/0x220 [] ? driver_register+0x8b/0xeb [] ? __pci_register_driver+0x43/0x9f [] ? __blocking_notifier_call_chain+0x40/0x4c [] ? puffin_init+0x0/0x48 [puffin] [] ? puffin_init+0x17/0x48 [puffin] [] ? do_one_initcall+0x4c/0x131 [] ? sys_init_module+0xa7/0x1b7 [] ? syscall_call+0x7/0xb Code: 6e 74 00 00 00 92 33 00 00 18 00 0e 01 73 79 6e 63 65 2d 72 65 67 69 73 74 72 79 0c 00 49 32 00 00 14 00 09 01 61 6c 73 61 2d 69 <6e> 66 6f 00 00 00 42 37 00 00 10 00 07 01 6b 69 6c 6c 61 6c 6c EIP: [] ulite_console_setup+0x6f/0xa8 SS:ESP 0068:f6fd1cd8 CR2: 0000000000000000 Signed-off-by: Richard Röjfors Acked-by: Peter Korsgaard Cc: Alan Cox Cc: Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/serial/uartlite.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/serial/uartlite.c b/drivers/serial/uartlite.c index 377f2712289..ab2ab3c8183 100644 --- a/drivers/serial/uartlite.c +++ b/drivers/serial/uartlite.c @@ -394,7 +394,7 @@ static void ulite_console_write(struct console *co, const char *s, spin_unlock_irqrestore(&port->lock, flags); } -static int __init ulite_console_setup(struct console *co, char *options) +static int __devinit ulite_console_setup(struct console *co, char *options) { struct uart_port *port; int baud = 9600; -- cgit v1.2.3 From 094e9539bd24bbe23b8e2741e903b0f3f1f85b03 Mon Sep 17 00:00:00 2001 From: Jeff Mahoney Date: Tue, 2 Feb 2010 13:44:14 -0800 Subject: hugetlb: fix section mismatches hugetlb_sysfs_add_hstate is called by hugetlb_register_node directly during init and also indirectly via sysfs after init. This patch removes the __init tag from hugetlb_sysfs_add_hstate. Signed-off-by: Jeff Mahoney Cc: Lee Schermerhorn Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- mm/hugetlb.c | 7 +++---- 1 file changed, 3 insertions(+), 4 deletions(-) diff --git a/mm/hugetlb.c b/mm/hugetlb.c index e91b81b6367..2d16fa6b8c2 100644 --- a/mm/hugetlb.c +++ b/mm/hugetlb.c @@ -1515,10 +1515,9 @@ static struct attribute_group hstate_attr_group = { .attrs = hstate_attrs, }; -static int __init hugetlb_sysfs_add_hstate(struct hstate *h, - struct kobject *parent, - struct kobject **hstate_kobjs, - struct attribute_group *hstate_attr_group) +static int hugetlb_sysfs_add_hstate(struct hstate *h, struct kobject *parent, + struct kobject **hstate_kobjs, + struct attribute_group *hstate_attr_group) { int retval; int hi = h - hstates; -- cgit v1.2.3 From a225a5cc2c25e1217e68ee2ab8dd4454573fa308 Mon Sep 17 00:00:00 2001 From: Anton Blanchard Date: Tue, 2 Feb 2010 13:44:15 -0800 Subject: fault injection: correct function names in documentation init_fault_attr_entries() should be init_fault_attr_dentries(). cleanup_fault_attr_entries() should be cleanup_fault_attr_dentries(). Signed-off-by: Anton Blanchard Acked-by: Akinobu Mita Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- Documentation/fault-injection/fault-injection.txt | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/Documentation/fault-injection/fault-injection.txt b/Documentation/fault-injection/fault-injection.txt index 07930564079..7be15e44d48 100644 --- a/Documentation/fault-injection/fault-injection.txt +++ b/Documentation/fault-injection/fault-injection.txt @@ -143,8 +143,8 @@ o provide a way to configure fault attributes failslab, fail_page_alloc, and fail_make_request use this way. Helper functions: - init_fault_attr_entries(entries, attr, name); - void cleanup_fault_attr_entries(entries); + init_fault_attr_dentries(entries, attr, name); + void cleanup_fault_attr_dentries(entries); - module parameters -- cgit v1.2.3 From ea0854170c95245a258b386c7a9314399c949fe0 Mon Sep 17 00:00:00 2001 From: Shaohui Zheng Date: Tue, 2 Feb 2010 13:44:16 -0800 Subject: memory hotplug: fix a bug on /dev/mem for 64-bit kernels Newly added memory can not be accessed via /dev/mem, because we do not update the variables high_memory, max_pfn and max_low_pfn. Add a function update_end_of_memory_vars() to update these variables for 64-bit kernels. [akpm@linux-foundation.org: simplify comment] Signed-off-by: Shaohui Zheng Cc: Andi Kleen Cc: Li Haicheng Reviewed-by: Wu Fengguang Reviewed-by: KAMEZAWA Hiroyuki Cc: Ingo Molnar Cc: Thomas Gleixner Cc: "H. Peter Anvin" Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- arch/x86/mm/init_64.c | 19 +++++++++++++++++++ 1 file changed, 19 insertions(+) diff --git a/arch/x86/mm/init_64.c b/arch/x86/mm/init_64.c index 5198b9bb34e..69ddfbd9113 100644 --- a/arch/x86/mm/init_64.c +++ b/arch/x86/mm/init_64.c @@ -49,6 +49,7 @@ #include #include #include +#include static unsigned long dma_reserve __initdata; @@ -615,6 +616,21 @@ void __init paging_init(void) * Memory hotplug specific functions */ #ifdef CONFIG_MEMORY_HOTPLUG +/* + * After memory hotplug the variables max_pfn, max_low_pfn and high_memory need + * updating. + */ +static void update_end_of_memory_vars(u64 start, u64 size) +{ + unsigned long end_pfn = PFN_UP(start + size); + + if (end_pfn > max_pfn) { + max_pfn = end_pfn; + max_low_pfn = end_pfn; + high_memory = (void *)__va(max_pfn * PAGE_SIZE - 1) + 1; + } +} + /* * Memory is added always to NORMAL zone. This means you will never get * additional DMA/DMA32 memory. @@ -634,6 +650,9 @@ int arch_add_memory(int nid, u64 start, u64 size) ret = __add_pages(nid, zone, start_pfn, nr_pages); WARN_ON_ONCE(ret); + /* update max_pfn, max_low_pfn and high_memory */ + update_end_of_memory_vars(start, size); + return ret; } EXPORT_SYMBOL_GPL(arch_add_memory); -- cgit v1.2.3 From ca0bf64d99f6e3f6e2fe2585e52a0ac57354beac Mon Sep 17 00:00:00 2001 From: Thadeu Lima de Souza Cascardo Date: Tue, 2 Feb 2010 13:44:17 -0800 Subject: pktcdvd: removing device does not remove its sysfs dir This is the counterpart to cba767175becadc5c4016cceb7bfdd2c7fe722f4 ("pktcdvd: remove broken dev_t export of class devices"). Device is not registered using dev_t, so it should not be destroyed using device_destroy which looks up the device by dev_t. This will fail and adding the device again will fail with the "duplicate name" error. This is fixed using device_unregister instead of device_destroy. Signed-off-by: Thadeu Lima de Souza Cascardo Cc: Kay Sievers Cc: Peter Osterlund Cc: Al Viro Cc: Jens Axboe Cc: Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/block/pktcdvd.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/block/pktcdvd.c b/drivers/block/pktcdvd.c index 2ddf03ae034..68b5957f107 100644 --- a/drivers/block/pktcdvd.c +++ b/drivers/block/pktcdvd.c @@ -322,7 +322,7 @@ static void pkt_sysfs_dev_remove(struct pktcdvd_device *pd) pkt_kobj_remove(pd->kobj_stat); pkt_kobj_remove(pd->kobj_wqueue); if (class_pktcdvd) - device_destroy(class_pktcdvd, pd->pkt_dev); + device_unregister(pd->dev); } -- cgit v1.2.3 From d4bfa033ed84e0ae446eff445d107ffd5ee78df3 Mon Sep 17 00:00:00 2001 From: Jiri Kosina Date: Fri, 29 Jan 2010 15:03:36 +0100 Subject: HID: make raw reports possible for both feature and output reports In commit 2da31939a42 ("Bluetooth: Implement raw output support for HIDP layer"), support for Bluetooth hid_output_raw_report was added, but it pushes the data to the intr socket instead of the ctrl one. This has been fixed by 6bf8268f9a91f1 ("Bluetooth: Use the control channel for raw HID reports") Still, it is necessary to distinguish whether the report in question should be either FEATURE or OUTPUT. For this, we have to extend the generic HID API, so that hid_output_raw_report() callback provides means to specify this value so that it can be passed down to lower level hardware drivers (currently Bluetooth and USB). Based on original patch by Bastien Nocera Acked-by: Marcel Holtmann Signed-off-by: Jiri Kosina --- drivers/hid/hidraw.c | 2 +- drivers/hid/usbhid/hid-core.c | 5 +++-- include/linux/hid.h | 2 +- net/bluetooth/hidp/core.c | 17 ++++++++++++++--- 4 files changed, 19 insertions(+), 7 deletions(-) diff --git a/drivers/hid/hidraw.c b/drivers/hid/hidraw.c index cdd136942bc..d04476700b7 100644 --- a/drivers/hid/hidraw.c +++ b/drivers/hid/hidraw.c @@ -134,7 +134,7 @@ static ssize_t hidraw_write(struct file *file, const char __user *buffer, size_t goto out; } - ret = dev->hid_output_raw_report(dev, buf, count); + ret = dev->hid_output_raw_report(dev, buf, count, HID_OUTPUT_REPORT); out: kfree(buf); return ret; diff --git a/drivers/hid/usbhid/hid-core.c b/drivers/hid/usbhid/hid-core.c index e2997a8d5e1..caa16c057ce 100644 --- a/drivers/hid/usbhid/hid-core.c +++ b/drivers/hid/usbhid/hid-core.c @@ -774,7 +774,8 @@ static int hid_alloc_buffers(struct usb_device *dev, struct hid_device *hid) return 0; } -static int usbhid_output_raw_report(struct hid_device *hid, __u8 *buf, size_t count) +static int usbhid_output_raw_report(struct hid_device *hid, __u8 *buf, size_t count, + unsigned char report_type) { struct usbhid_device *usbhid = hid->driver_data; struct usb_device *dev = hid_to_usb_dev(hid); @@ -785,7 +786,7 @@ static int usbhid_output_raw_report(struct hid_device *hid, __u8 *buf, size_t co ret = usb_control_msg(dev, usb_sndctrlpipe(dev, 0), HID_REQ_SET_REPORT, USB_DIR_OUT | USB_TYPE_CLASS | USB_RECIP_INTERFACE, - ((HID_OUTPUT_REPORT + 1) << 8) | *buf, + ((report_type + 1) << 8) | *buf, interface->desc.bInterfaceNumber, buf + 1, count - 1, USB_CTRL_SET_TIMEOUT); diff --git a/include/linux/hid.h b/include/linux/hid.h index 87093652dda..3661a626941 100644 --- a/include/linux/hid.h +++ b/include/linux/hid.h @@ -501,7 +501,7 @@ struct hid_device { /* device report descriptor */ void (*hiddev_report_event) (struct hid_device *, struct hid_report *); /* handler for raw output data, used by hidraw */ - int (*hid_output_raw_report) (struct hid_device *, __u8 *, size_t); + int (*hid_output_raw_report) (struct hid_device *, __u8 *, size_t, unsigned char); /* debugging support via debugfs */ unsigned short debug; diff --git a/net/bluetooth/hidp/core.c b/net/bluetooth/hidp/core.c index 6cf526d06e2..37ba153c4cd 100644 --- a/net/bluetooth/hidp/core.c +++ b/net/bluetooth/hidp/core.c @@ -313,10 +313,21 @@ static int hidp_send_report(struct hidp_session *session, struct hid_report *rep return hidp_queue_report(session, buf, rsize); } -static int hidp_output_raw_report(struct hid_device *hid, unsigned char *data, size_t count) +static int hidp_output_raw_report(struct hid_device *hid, unsigned char *data, size_t count, + unsigned char report_type) { - if (hidp_send_ctrl_message(hid->driver_data, - HIDP_TRANS_SET_REPORT | HIDP_DATA_RTYPE_FEATURE, + switch (report_type) { + case HID_FEATURE_REPORT: + report_type = HIDP_TRANS_SET_REPORT | HIDP_DATA_RTYPE_FEATURE; + break; + case HID_OUTPUT_REPORT: + report_type = HIDP_TRANS_DATA | HIDP_DATA_RTYPE_OUPUT; + break; + default: + return -EINVAL; + } + + if (hidp_send_ctrl_message(hid->driver_data, report_type, data, count)) return -ENOMEM; return count; -- cgit v1.2.3 From 46a709b900bfcf43244cd19cf3245c77484ec733 Mon Sep 17 00:00:00 2001 From: Bastien Nocera Date: Wed, 20 Jan 2010 12:00:53 +0000 Subject: HID: Implement Wacom quirk in the kernel The hid-wacom driver required user-space to poke at the tablet to make it send data about the cursor location. This patch makes it do the same thing but in the kernel. Signed-off-by: Bastien Nocera Acked-by: Marcel Holtmann Signed-off-by: Jiri Kosina --- drivers/hid/hid-wacom.c | 27 +++++++++++++++++++++++++++ 1 file changed, 27 insertions(+) diff --git a/drivers/hid/hid-wacom.c b/drivers/hid/hid-wacom.c index 12dcda52920..b8778db720b 100644 --- a/drivers/hid/hid-wacom.c +++ b/drivers/hid/hid-wacom.c @@ -156,7 +156,9 @@ static int wacom_probe(struct hid_device *hdev, struct hid_input *hidinput; struct input_dev *input; struct wacom_data *wdata; + char rep_data[2]; int ret; + int limit; wdata = kzalloc(sizeof(*wdata), GFP_KERNEL); if (wdata == NULL) { @@ -166,6 +168,7 @@ static int wacom_probe(struct hid_device *hdev, hid_set_drvdata(hdev, wdata); + /* Parse the HID report now */ ret = hid_parse(hdev); if (ret) { dev_err(&hdev->dev, "parse failed\n"); @@ -178,6 +181,30 @@ static int wacom_probe(struct hid_device *hdev, goto err_free; } + /* Set Wacom mode2 */ + rep_data[0] = 0x03; rep_data[1] = 0x00; + limit = 3; + do { + ret = hdev->hid_output_raw_report(hdev, rep_data, 2, + HID_FEATURE_REPORT); + } while (ret < 0 && limit-- > 0); + if (ret < 0) { + dev_err(&hdev->dev, "failed to poke device #1, %d\n", ret); + goto err_free; + } + + /* 0x06 - high reporting speed, 0x05 - low speed */ + rep_data[0] = 0x06; rep_data[1] = 0x00; + limit = 3; + do { + ret = hdev->hid_output_raw_report(hdev, rep_data, 2, + HID_FEATURE_REPORT); + } while (ret < 0 && limit-- > 0); + if (ret < 0) { + dev_err(&hdev->dev, "failed to poke device #2, %d\n", ret); + goto err_free; + } + hidinput = list_entry(hdev->inputs.next, struct hid_input, list); input = hidinput->input; -- cgit v1.2.3 From f9ce7c283c16538955d5d094101889792bcde109 Mon Sep 17 00:00:00 2001 From: Bastien Nocera Date: Wed, 20 Jan 2010 12:01:53 +0000 Subject: HID: Enable Sixaxis controller over Bluetooth Now that hid_output_raw_report works, port the PS3 Sixaxis Bluetooth quirk from user-space, into kernel-space. Signed-off-by: Bastien Nocera Acked-by: Marcel Holtmann Signed-off-by: Jiri Kosina --- drivers/hid/hid-core.c | 1 + drivers/hid/hid-sony.c | 21 +++++++++++++++++++-- 2 files changed, 20 insertions(+), 2 deletions(-) diff --git a/drivers/hid/hid-core.c b/drivers/hid/hid-core.c index eabe5f87c6c..f7f80e1f1ee 100644 --- a/drivers/hid/hid-core.c +++ b/drivers/hid/hid-core.c @@ -1340,6 +1340,7 @@ static const struct hid_device_id hid_blacklist[] = { { HID_USB_DEVICE(USB_VENDOR_ID_PETALYNX, USB_DEVICE_ID_PETALYNX_MAXTER_REMOTE) }, { HID_USB_DEVICE(USB_VENDOR_ID_SAMSUNG, USB_DEVICE_ID_SAMSUNG_IR_REMOTE) }, { HID_USB_DEVICE(USB_VENDOR_ID_SONY, USB_DEVICE_ID_SONY_PS3_CONTROLLER) }, + { HID_BLUETOOTH_DEVICE(USB_VENDOR_ID_SONY, USB_DEVICE_ID_SONY_PS3_CONTROLLER) }, { HID_USB_DEVICE(USB_VENDOR_ID_SONY, USB_DEVICE_ID_SONY_VAIO_VGX_MOUSE) }, { HID_USB_DEVICE(USB_VENDOR_ID_SUNPLUS, USB_DEVICE_ID_SUNPLUS_WDESKTOP) }, { HID_USB_DEVICE(USB_VENDOR_ID_THRUSTMASTER, 0xb300) }, diff --git a/drivers/hid/hid-sony.c b/drivers/hid/hid-sony.c index 4e8450228a2..6ced140b141 100644 --- a/drivers/hid/hid-sony.c +++ b/drivers/hid/hid-sony.c @@ -48,7 +48,7 @@ static void sony_report_fixup(struct hid_device *hdev, __u8 *rdesc, * to "operational". Without this, the ps3 controller will not report any * events. */ -static int sony_set_operational(struct hid_device *hdev) +static int sony_set_operational_usb(struct hid_device *hdev) { struct usb_interface *intf = to_usb_interface(hdev->dev.parent); struct usb_device *dev = interface_to_usbdev(intf); @@ -73,6 +73,12 @@ static int sony_set_operational(struct hid_device *hdev) return ret; } +static int sony_set_operational_bt(struct hid_device *hdev) +{ + unsigned char buf[] = { 0x53, 0xf4, 0x42, 0x03, 0x00, 0x00 }; + return hdev->hid_output_raw_report(hdev, buf, sizeof(buf), HID_FEATURE_REPORT); +} + static int sony_probe(struct hid_device *hdev, const struct hid_device_id *id) { int ret; @@ -101,7 +107,17 @@ static int sony_probe(struct hid_device *hdev, const struct hid_device_id *id) goto err_free; } - ret = sony_set_operational(hdev); + switch (hdev->bus) { + case BUS_USB: + ret = sony_set_operational_usb(hdev); + break; + case BUS_BLUETOOTH: + ret = sony_set_operational_bt(hdev); + break; + default: + ret = 0; + } + if (ret < 0) goto err_stop; @@ -121,6 +137,7 @@ static void sony_remove(struct hid_device *hdev) static const struct hid_device_id sony_devices[] = { { HID_USB_DEVICE(USB_VENDOR_ID_SONY, USB_DEVICE_ID_SONY_PS3_CONTROLLER) }, + { HID_BLUETOOTH_DEVICE(USB_VENDOR_ID_SONY, USB_DEVICE_ID_SONY_PS3_CONTROLLER) }, { HID_USB_DEVICE(USB_VENDOR_ID_SONY, USB_DEVICE_ID_SONY_VAIO_VGX_MOUSE), .driver_data = VAIO_RDESC_CONSTANT }, { } -- cgit v1.2.3 From 342f31e84eec9002b75f6fcdec6bd932ac77a390 Mon Sep 17 00:00:00 2001 From: Jiri Kosina Date: Wed, 3 Feb 2010 15:52:31 +0100 Subject: HID: make Wacom modesetting failures non-fatal With Wacom tablet mode-setting moved from userspace into kernel, we don't have to consider failures of device queries through the _raw callback as hard failure, as the driver can safely continue anyway. This is consistent with the current USB driver in wacom_sys.c Reported-by: Ping Cheng Signed-off-by: Jiri Kosina --- drivers/hid/hid-wacom.c | 17 +++++++++-------- 1 file changed, 9 insertions(+), 8 deletions(-) diff --git a/drivers/hid/hid-wacom.c b/drivers/hid/hid-wacom.c index b8778db720b..8d3b46f5d14 100644 --- a/drivers/hid/hid-wacom.c +++ b/drivers/hid/hid-wacom.c @@ -181,6 +181,11 @@ static int wacom_probe(struct hid_device *hdev, goto err_free; } + /* + * Note that if the raw queries fail, it's not a hard failure and it + * is safe to continue + */ + /* Set Wacom mode2 */ rep_data[0] = 0x03; rep_data[1] = 0x00; limit = 3; @@ -188,10 +193,8 @@ static int wacom_probe(struct hid_device *hdev, ret = hdev->hid_output_raw_report(hdev, rep_data, 2, HID_FEATURE_REPORT); } while (ret < 0 && limit-- > 0); - if (ret < 0) { - dev_err(&hdev->dev, "failed to poke device #1, %d\n", ret); - goto err_free; - } + if (ret < 0) + dev_warn(&hdev->dev, "failed to poke device #1, %d\n", ret); /* 0x06 - high reporting speed, 0x05 - low speed */ rep_data[0] = 0x06; rep_data[1] = 0x00; @@ -200,10 +203,8 @@ static int wacom_probe(struct hid_device *hdev, ret = hdev->hid_output_raw_report(hdev, rep_data, 2, HID_FEATURE_REPORT); } while (ret < 0 && limit-- > 0); - if (ret < 0) { - dev_err(&hdev->dev, "failed to poke device #2, %d\n", ret); - goto err_free; - } + if (ret < 0) + dev_warn(&hdev->dev, "failed to poke device #2, %d\n", ret); hidinput = list_entry(hdev->inputs.next, struct hid_input, list); input = hidinput->input; -- cgit v1.2.3 From 90a006abf8015c8cab893555244d8fc673b24839 Mon Sep 17 00:00:00 2001 From: Michael Poole Date: Sun, 24 Jan 2010 22:32:29 -0500 Subject: HID: Export hid_register_report The Apple Magic Mouse (and probably other devices) publish reports that are not called out in their HID report descriptors -- they only send them when enabled through other writes to the device. This allows a driver to handle these unlisted reports. Signed-off-by: Michael Poole Signed-off-by: Jiri Kosina --- drivers/hid/hid-core.c | 3 ++- include/linux/hid.h | 1 + 2 files changed, 3 insertions(+), 1 deletion(-) diff --git a/drivers/hid/hid-core.c b/drivers/hid/hid-core.c index f7f80e1f1ee..66a91eb3e4c 100644 --- a/drivers/hid/hid-core.c +++ b/drivers/hid/hid-core.c @@ -51,7 +51,7 @@ EXPORT_SYMBOL_GPL(hid_debug); * Register a new report for a device. */ -static struct hid_report *hid_register_report(struct hid_device *device, unsigned type, unsigned id) +struct hid_report *hid_register_report(struct hid_device *device, unsigned type, unsigned id) { struct hid_report_enum *report_enum = device->report_enum + type; struct hid_report *report; @@ -75,6 +75,7 @@ static struct hid_report *hid_register_report(struct hid_device *device, unsigne return report; } +EXPORT_SYMBOL_GPL(hid_register_report); /* * Register a new field for this report. diff --git a/include/linux/hid.h b/include/linux/hid.h index 3661a626941..456838c8884 100644 --- a/include/linux/hid.h +++ b/include/linux/hid.h @@ -690,6 +690,7 @@ int hid_input_report(struct hid_device *, int type, u8 *, int, int); int hidinput_find_field(struct hid_device *hid, unsigned int type, unsigned int code, struct hid_field **field); void hid_output_report(struct hid_report *report, __u8 *data); struct hid_device *hid_allocate_device(void); +struct hid_report *hid_register_report(struct hid_device *device, unsigned type, unsigned id); int hid_parse_report(struct hid_device *hid, __u8 *start, unsigned size); int hid_check_keys_pressed(struct hid_device *hid); int hid_connect(struct hid_device *hid, unsigned int connect_mask); -- cgit v1.2.3 From 128537cea464d919febeaea2000e256749f317eb Mon Sep 17 00:00:00 2001 From: Michael Poole Date: Sat, 6 Feb 2010 12:24:36 -0500 Subject: HID: add a device driver for the Apple Magic Mouse. The Magic Mouse requires that a driver send an unlock Report(Feature) command, similar to the Wacom wireless tablet and Sixaxis controller quirks. This turns on an Input Report that isn't published in the input Report descriptor that contains touch data (and usually overrides the normal motion and click Report). Because the mouse has only one switch and no scroll wheel, the driver (under control of parameters) emulates a middle button and scroll wheel. User space could also ignore and/or re-synthesize those events based on the reported events. Some user-space tools to talk to the mouse directly (that is, when it is not associated with the host's HIDP stack) are at http://github.com/entrope/linux-magicmouse Signed-off-by: Michael Poole Signed-off-by: Jiri Kosina --- drivers/hid/Kconfig | 10 + drivers/hid/Makefile | 1 + drivers/hid/hid-core.c | 1 + drivers/hid/hid-ids.h | 1 + drivers/hid/hid-magicmouse.c | 469 +++++++++++++++++++++++++++++++++++++++++++ 5 files changed, 482 insertions(+) create mode 100644 drivers/hid/hid-magicmouse.c diff --git a/drivers/hid/Kconfig b/drivers/hid/Kconfig index 24d90ea246c..ba14ec89825 100644 --- a/drivers/hid/Kconfig +++ b/drivers/hid/Kconfig @@ -183,6 +183,16 @@ config LOGIRUMBLEPAD2_FF Say Y here if you want to enable force feedback support for Logitech Rumblepad 2 devices. +config HID_MAGICMOUSE + tristate "Apple" if EMBEDDED + depends on BT_HIDP + default !EMBEDDED + ---help--- + Support for the Apple Magic Mouse. + + Say Y here if you want support for the multi-touch features of the + Apple Wireless "Magic" Mouse. + config HID_MICROSOFT tristate "Microsoft" if EMBEDDED depends on USB_HID diff --git a/drivers/hid/Makefile b/drivers/hid/Makefile index 0de2dff5542..45d81e9cd2d 100644 --- a/drivers/hid/Makefile +++ b/drivers/hid/Makefile @@ -31,6 +31,7 @@ obj-$(CONFIG_HID_GYRATION) += hid-gyration.o obj-$(CONFIG_HID_KENSINGTON) += hid-kensington.o obj-$(CONFIG_HID_KYE) += hid-kye.o obj-$(CONFIG_HID_LOGITECH) += hid-logitech.o +obj-$(CONFIG_HID_MAGICMOUSE) += hid-magicmouse.o obj-$(CONFIG_HID_MICROSOFT) += hid-microsoft.o obj-$(CONFIG_HID_MONTEREY) += hid-monterey.o obj-$(CONFIG_HID_NTRIG) += hid-ntrig.o diff --git a/drivers/hid/hid-core.c b/drivers/hid/hid-core.c index 66a91eb3e4c..f038422f432 100644 --- a/drivers/hid/hid-core.c +++ b/drivers/hid/hid-core.c @@ -1254,6 +1254,7 @@ static const struct hid_device_id hid_blacklist[] = { { HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_ATV_IRCONTROL) }, { HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_IRCONTROL4) }, { HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_MIGHTYMOUSE) }, + { HID_BLUETOOTH_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_MAGICMOUSE) }, { HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_FOUNTAIN_ANSI) }, { HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_FOUNTAIN_ISO) }, { HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_GEYSER_ANSI) }, diff --git a/drivers/hid/hid-ids.h b/drivers/hid/hid-ids.h index 010368e649e..11e521864ab 100644 --- a/drivers/hid/hid-ids.h +++ b/drivers/hid/hid-ids.h @@ -56,6 +56,7 @@ #define USB_VENDOR_ID_APPLE 0x05ac #define USB_DEVICE_ID_APPLE_MIGHTYMOUSE 0x0304 +#define USB_DEVICE_ID_APPLE_MAGICMOUSE 0x030d #define USB_DEVICE_ID_APPLE_FOUNTAIN_ANSI 0x020e #define USB_DEVICE_ID_APPLE_FOUNTAIN_ISO 0x020f #define USB_DEVICE_ID_APPLE_GEYSER_ANSI 0x0214 diff --git a/drivers/hid/hid-magicmouse.c b/drivers/hid/hid-magicmouse.c new file mode 100644 index 00000000000..f94b3e43c5b --- /dev/null +++ b/drivers/hid/hid-magicmouse.c @@ -0,0 +1,469 @@ +/* + * Apple "Magic" Wireless Mouse driver + * + * Copyright (c) 2010 Michael Poole + */ + +/* + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the Free + * Software Foundation; either version 2 of the License, or (at your option) + * any later version. + */ + +#include +#include +#include +#include + +#include "hid-ids.h" + +static bool emulate_3button = 1; +module_param(emulate_3button, bool, 0644); +MODULE_PARM_DESC(emulate_3button, "Emulate a middle button"); + +static int middle_button_start = -350; +static int middle_button_stop = +350; + +static bool emulate_scroll_wheel = 1; +module_param(emulate_scroll_wheel, bool, 0644); +MODULE_PARM_DESC(emulate_scroll_wheel, "Emulate a scroll wheel"); + +static bool report_touches = 1; +module_param(report_touches, bool, 0644); +MODULE_PARM_DESC(report_touches, "Emit touch records (otherwise, only use them for emulation)"); + +static bool report_undeciphered = 0; +module_param(report_undeciphered, bool, 0644); +MODULE_PARM_DESC(report_undeciphered, "Report undeciphered multi-touch state field using a MSC_RAW event"); + +#define TOUCH_REPORT_ID 0x29 +/* These definitions are not precise, but they're close enough. (Bits + * 0x03 seem to indicate the aspect ratio of the touch, bits 0x70 seem + * to be some kind of bit mask -- 0x20 may be a near-field reading, + * and 0x40 is actual contact, and 0x10 may be a start/stop or change + * indication.) + */ +#define TOUCH_STATE_MASK 0xf0 +#define TOUCH_STATE_NONE 0x00 +#define TOUCH_STATE_START 0x30 +#define TOUCH_STATE_DRAG 0x40 + +/** + * struct magicmouse_sc - Tracks Magic Mouse-specific data. + * @input: Input device through which we report events. + * @quirks: Currently unused. + * @last_timestamp: Timestamp from most recent (18-bit) touch report + * (units of milliseconds over short windows, but seems to + * increase faster when there are no touches). + * @delta_time: 18-bit difference between the two most recent touch + * reports from the mouse. + * @ntouches: Number of touches in most recent touch report. + * @scroll_accel: Number of consecutive scroll motions. + * @scroll_jiffies: Time of last scroll motion. + * @touches: Most recent data for a touch, indexed by tracking ID. + * @tracking_ids: Mapping of current touch input data to @touches. + */ +struct magicmouse_sc { + struct input_dev *input; + unsigned long quirks; + + int last_timestamp; + int delta_time; + int ntouches; + int scroll_accel; + unsigned long scroll_jiffies; + + struct { + short x; + short y; + short scroll_y; + u8 size; + } touches[16]; + int tracking_ids[16]; +}; + +static int magicmouse_firm_touch(struct magicmouse_sc *msc) +{ + int touch = -1; + int ii; + + /* If there is only one "firm" touch, set touch to its + * tracking ID. + */ + for (ii = 0; ii < msc->ntouches; ii++) { + int idx = msc->tracking_ids[ii]; + if (msc->touches[idx].size < 8) { + /* Ignore this touch. */ + } else if (touch >= 0) { + touch = -1; + break; + } else { + touch = idx; + } + } + + return touch; +} + +static void magicmouse_emit_buttons(struct magicmouse_sc *msc, int state) +{ + int last_state = test_bit(BTN_LEFT, msc->input->key) << 0 | + test_bit(BTN_RIGHT, msc->input->key) << 1 | + test_bit(BTN_MIDDLE, msc->input->key) << 2; + + if (emulate_3button) { + int id; + + /* If some button was pressed before, keep it held + * down. Otherwise, if there's exactly one firm + * touch, use that to override the mouse's guess. + */ + if (state == 0) { + /* The button was released. */ + } else if (last_state != 0) { + state = last_state; + } else if ((id = magicmouse_firm_touch(msc)) >= 0) { + int x = msc->touches[id].x; + if (x < middle_button_start) + state = 1; + else if (x > middle_button_stop) + state = 2; + else + state = 4; + } /* else: we keep the mouse's guess */ + + input_report_key(msc->input, BTN_MIDDLE, state & 4); + } + + input_report_key(msc->input, BTN_LEFT, state & 1); + input_report_key(msc->input, BTN_RIGHT, state & 2); + + if (state != last_state) + msc->scroll_accel = 0; +} + +static void magicmouse_emit_touch(struct magicmouse_sc *msc, int raw_id, u8 *tdata) +{ + struct input_dev *input = msc->input; + __s32 x_y = tdata[0] << 8 | tdata[1] << 16 | tdata[2] << 24; + int misc = tdata[5] | tdata[6] << 8; + int id = (misc >> 6) & 15; + int x = x_y << 12 >> 20; + int y = -(x_y >> 20); + + /* Store tracking ID and other fields. */ + msc->tracking_ids[raw_id] = id; + msc->touches[id].x = x; + msc->touches[id].y = y; + msc->touches[id].size = misc & 63; + + /* If requested, emulate a scroll wheel by detecting small + * vertical touch motions along the middle of the mouse. + */ + if (emulate_scroll_wheel && + middle_button_start < x && x < middle_button_stop) { + static const int accel_profile[] = { + 256, 228, 192, 160, 128, 96, 64, 32, + }; + unsigned long now = jiffies; + int step = msc->touches[id].scroll_y - y; + + /* Reset acceleration after half a second. */ + if (time_after(now, msc->scroll_jiffies + HZ / 2)) + msc->scroll_accel = 0; + + /* Calculate and apply the scroll motion. */ + switch (tdata[7] & TOUCH_STATE_MASK) { + case TOUCH_STATE_START: + msc->touches[id].scroll_y = y; + msc->scroll_accel = min_t(int, msc->scroll_accel + 1, + ARRAY_SIZE(accel_profile) - 1); + break; + case TOUCH_STATE_DRAG: + step = step / accel_profile[msc->scroll_accel]; + if (step != 0) { + msc->touches[id].scroll_y = y; + msc->scroll_jiffies = now; + input_report_rel(input, REL_WHEEL, step); + } + break; + } + } + + /* Generate the input events for this touch. */ + if (report_touches) { + int orientation = (misc >> 10) - 32; + + input_report_abs(input, ABS_MT_TRACKING_ID, id); + input_report_abs(input, ABS_MT_TOUCH_MAJOR, tdata[3]); + input_report_abs(input, ABS_MT_TOUCH_MINOR, tdata[4]); + input_report_abs(input, ABS_MT_ORIENTATION, orientation); + input_report_abs(input, ABS_MT_POSITION_X, x); + input_report_abs(input, ABS_MT_POSITION_Y, y); + + if (report_undeciphered) { + input_event(input, EV_MSC, MSC_RAW, tdata[7]); + } + + input_mt_sync(input); + } +} + +static int magicmouse_raw_event(struct hid_device *hdev, + struct hid_report *report, u8 *data, int size) +{ + struct magicmouse_sc *msc = hid_get_drvdata(hdev); + struct input_dev *input = msc->input; + int x, y, ts, ii, clicks; + + switch (data[0]) { + case 0x10: + if (size != 6) + return 0; + x = (__s16)(data[2] | data[3] << 8); + y = (__s16)(data[4] | data[5] << 8); + clicks = data[1]; + break; + case TOUCH_REPORT_ID: + /* Expect six bytes of prefix, and N*8 bytes of touch data. */ + if (size < 6 || ((size - 6) % 8) != 0) + return 0; + ts = data[3] >> 6 | data[4] << 2 | data[5] << 10; + msc->delta_time = (ts - msc->last_timestamp) & 0x3ffff; + msc->last_timestamp = ts; + msc->ntouches = (size - 6) / 8; + for (ii = 0; ii < msc->ntouches; ii++) + magicmouse_emit_touch(msc, ii, data + ii * 8 + 6); + /* When emulating three-button mode, it is important + * to have the current touch information before + * generating a click event. + */ + x = (signed char)data[1]; + y = (signed char)data[2]; + clicks = data[3]; + break; + case 0x20: /* Theoretically battery status (0-100), but I have + * never seen it -- maybe it is only upon request. + */ + case 0x60: /* Unknown, maybe laser on/off. */ + case 0x61: /* Laser reflection status change. + * data[1]: 0 = spotted, 1 = lost + */ + default: + return 0; + } + + magicmouse_emit_buttons(msc, clicks & 3); + input_report_rel(input, REL_X, x); + input_report_rel(input, REL_Y, y); + input_sync(input); + return 1; +} + +static int magicmouse_input_open(struct input_dev *dev) +{ + struct hid_device *hid = input_get_drvdata(dev); + + return hid->ll_driver->open(hid); +} + +static void magicmouse_input_close(struct input_dev *dev) +{ + struct hid_device *hid = input_get_drvdata(dev); + + hid->ll_driver->close(hid); +} + +static void magicmouse_setup_input(struct input_dev *input, struct hid_device *hdev) +{ + input_set_drvdata(input, hdev); + input->event = hdev->ll_driver->hidinput_input_event; + input->open = magicmouse_input_open; + input->close = magicmouse_input_close; + + input->name = hdev->name; + input->phys = hdev->phys; + input->uniq = hdev->uniq; + input->id.bustype = hdev->bus; + input->id.vendor = hdev->vendor; + input->id.product = hdev->product; + input->id.version = hdev->version; + input->dev.parent = hdev->dev.parent; + + set_bit(EV_KEY, input->evbit); + set_bit(BTN_LEFT, input->keybit); + set_bit(BTN_RIGHT, input->keybit); + if (emulate_3button) + set_bit(BTN_MIDDLE, input->keybit); + set_bit(BTN_TOOL_FINGER, input->keybit); + + set_bit(EV_REL, input->evbit); + set_bit(REL_X, input->relbit); + set_bit(REL_Y, input->relbit); + if (emulate_scroll_wheel) + set_bit(REL_WHEEL, input->relbit); + + if (report_touches) { + set_bit(EV_ABS, input->evbit); + + set_bit(ABS_MT_TRACKING_ID, input->absbit); + input->absmin[ABS_MT_TRACKING_ID] = 0; + input->absmax[ABS_MT_TRACKING_ID] = 15; + input->absfuzz[ABS_MT_TRACKING_ID] = 0; + + set_bit(ABS_MT_TOUCH_MAJOR, input->absbit); + input->absmin[ABS_MT_TOUCH_MAJOR] = 0; + input->absmax[ABS_MT_TOUCH_MAJOR] = 255; + input->absfuzz[ABS_MT_TOUCH_MAJOR] = 4; + + set_bit(ABS_MT_TOUCH_MINOR, input->absbit); + input->absmin[ABS_MT_TOUCH_MINOR] = 0; + input->absmax[ABS_MT_TOUCH_MINOR] = 255; + input->absfuzz[ABS_MT_TOUCH_MINOR] = 4; + + set_bit(ABS_MT_ORIENTATION, input->absbit); + input->absmin[ABS_MT_ORIENTATION] = -32; + input->absmax[ABS_MT_ORIENTATION] = 31; + input->absfuzz[ABS_MT_ORIENTATION] = 1; + + set_bit(ABS_MT_POSITION_X, input->absbit); + input->absmin[ABS_MT_POSITION_X] = -1100; + input->absmax[ABS_MT_POSITION_X] = 1358; + input->absfuzz[ABS_MT_POSITION_X] = 4; + + /* Note: Touch Y position from the device is inverted relative + * to how pointer motion is reported (and relative to how USB + * HID recommends the coordinates work). This driver keeps + * the origin at the same position, and just uses the additive + * inverse of the reported Y. + */ + set_bit(ABS_MT_POSITION_Y, input->absbit); + input->absmin[ABS_MT_POSITION_Y] = -1589; + input->absmax[ABS_MT_POSITION_Y] = 2047; + input->absfuzz[ABS_MT_POSITION_Y] = 4; + } + + if (report_undeciphered) { + set_bit(EV_MSC, input->evbit); + set_bit(MSC_RAW, input->mscbit); + } +} + +static int magicmouse_probe(struct hid_device *hdev, + const struct hid_device_id *id) +{ + __u8 feature_1[] = { 0xd7, 0x01 }; + __u8 feature_2[] = { 0xf8, 0x01, 0x32 }; + struct input_dev *input; + struct magicmouse_sc *msc; + struct hid_report *report; + int ret; + + msc = kzalloc(sizeof(*msc), GFP_KERNEL); + if (msc == NULL) { + dev_err(&hdev->dev, "can't alloc magicmouse descriptor\n"); + return -ENOMEM; + } + + msc->quirks = id->driver_data; + hid_set_drvdata(hdev, msc); + + ret = hid_parse(hdev); + if (ret) { + dev_err(&hdev->dev, "magicmouse hid parse failed\n"); + goto err_free; + } + + ret = hid_hw_start(hdev, HID_CONNECT_DEFAULT); + if (ret) { + dev_err(&hdev->dev, "magicmouse hw start failed\n"); + goto err_free; + } + + report = hid_register_report(hdev, HID_INPUT_REPORT, TOUCH_REPORT_ID); + if (!report) { + dev_err(&hdev->dev, "unable to register touch report\n"); + ret = -ENOMEM; + goto err_free; + } + report->size = 6; + + ret = hdev->hid_output_raw_report(hdev, feature_1, sizeof(feature_1), + HID_FEATURE_REPORT); + if (ret != sizeof(feature_1)) { + dev_err(&hdev->dev, "unable to request touch data (1:%d)\n", + ret); + goto err_free; + } + ret = hdev->hid_output_raw_report(hdev, feature_2, + sizeof(feature_2), HID_FEATURE_REPORT); + if (ret != sizeof(feature_2)) { + dev_err(&hdev->dev, "unable to request touch data (2:%d)\n", + ret); + goto err_free; + } + + input = input_allocate_device(); + if (!input) { + dev_err(&hdev->dev, "can't alloc input device\n"); + ret = -ENOMEM; + goto err_free; + } + magicmouse_setup_input(input, hdev); + + ret = input_register_device(input); + if (ret) { + dev_err(&hdev->dev, "input device registration failed\n"); + goto err_both; + } + msc->input = input; + + return 0; + err_both: + input_free_device(input); + err_free: + kfree(msc); + return ret; +} + +static void magicmouse_remove(struct hid_device *hdev) +{ + hid_hw_stop(hdev); + kfree(hid_get_drvdata(hdev)); +} + +static const struct hid_device_id magic_mice[] = { + { HID_BLUETOOTH_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_MAGICMOUSE), + .driver_data = 0 }, + { } +}; +MODULE_DEVICE_TABLE(hid, magic_mice); + +static struct hid_driver magicmouse_driver = { + .name = "magicmouse", + .id_table = magic_mice, + .probe = magicmouse_probe, + .remove = magicmouse_remove, + .raw_event = magicmouse_raw_event, +}; + +static int __init magicmouse_init(void) +{ + int ret; + + ret = hid_register_driver(&magicmouse_driver); + if (ret) + printk(KERN_ERR "can't register magicmouse driver\n"); + + return ret; +} + +static void __exit magicmouse_exit(void) +{ + hid_unregister_driver(&magicmouse_driver); +} + +module_init(magicmouse_init); +module_exit(magicmouse_exit); +MODULE_LICENSE("GPL"); -- cgit v1.2.3 From 9f5231472340ebcaf2dec75428b67d5d0d872857 Mon Sep 17 00:00:00 2001 From: Jiri Kosina Date: Wed, 10 Feb 2010 14:59:03 +0100 Subject: HID: fix up Kconfig entry for MagicMouse Make Apple MagicMouse Kconfig entry consistent with other dirvers. Also expand the tristate text a little bit more, so that it doesn't clash with already existing HID_APPLE. Signed-off-by: Jiri Kosina --- drivers/hid/Kconfig | 5 ++--- 1 file changed, 2 insertions(+), 3 deletions(-) diff --git a/drivers/hid/Kconfig b/drivers/hid/Kconfig index ba14ec89825..0e668ccc251 100644 --- a/drivers/hid/Kconfig +++ b/drivers/hid/Kconfig @@ -184,11 +184,10 @@ config LOGIRUMBLEPAD2_FF Rumblepad 2 devices. config HID_MAGICMOUSE - tristate "Apple" if EMBEDDED + tristate "Apple MagicMouse multi-touch support" depends on BT_HIDP - default !EMBEDDED ---help--- - Support for the Apple Magic Mouse. + Support for the Apple Magic Mouse multi-touch. Say Y here if you want support for the multi-touch features of the Apple Wireless "Magic" Mouse. -- cgit v1.2.3 From 71b38bd4c1cc4f2b653064357e4efab77dfd711d Mon Sep 17 00:00:00 2001 From: Michael Poole Date: Thu, 11 Feb 2010 00:32:57 -0500 Subject: HID: magicmouse: coding style and probe failure fixes Use proper values to initialize bool configuration variables, tabs rather than spaces, no braces for one-line else clause, __set_bit() when the operation doesn't have to be atomic, input_set_abs_params() rather than writing the fields directly, and call hid_hw_stop() when appropriate to handle failures in the probe. Signed-off-by: Michael Poole Signed-off-by: Jiri Kosina --- drivers/hid/hid-magicmouse.c | 100 +++++++++++++++++-------------------------- 1 file changed, 40 insertions(+), 60 deletions(-) diff --git a/drivers/hid/hid-magicmouse.c b/drivers/hid/hid-magicmouse.c index f94b3e43c5b..4a3a94f2b10 100644 --- a/drivers/hid/hid-magicmouse.c +++ b/drivers/hid/hid-magicmouse.c @@ -18,22 +18,22 @@ #include "hid-ids.h" -static bool emulate_3button = 1; +static bool emulate_3button = true; module_param(emulate_3button, bool, 0644); MODULE_PARM_DESC(emulate_3button, "Emulate a middle button"); static int middle_button_start = -350; static int middle_button_stop = +350; -static bool emulate_scroll_wheel = 1; +static bool emulate_scroll_wheel = true; module_param(emulate_scroll_wheel, bool, 0644); MODULE_PARM_DESC(emulate_scroll_wheel, "Emulate a scroll wheel"); -static bool report_touches = 1; +static bool report_touches = true; module_param(report_touches, bool, 0644); MODULE_PARM_DESC(report_touches, "Emit touch records (otherwise, only use them for emulation)"); -static bool report_undeciphered = 0; +static bool report_undeciphered; module_param(report_undeciphered, bool, 0644); MODULE_PARM_DESC(report_undeciphered, "Report undeciphered multi-touch state field using a MSC_RAW event"); @@ -108,9 +108,9 @@ static int magicmouse_firm_touch(struct magicmouse_sc *msc) static void magicmouse_emit_buttons(struct magicmouse_sc *msc, int state) { - int last_state = test_bit(BTN_LEFT, msc->input->key) << 0 | - test_bit(BTN_RIGHT, msc->input->key) << 1 | - test_bit(BTN_MIDDLE, msc->input->key) << 2; + int last_state = test_bit(BTN_LEFT, msc->input->key) << 0 | + test_bit(BTN_RIGHT, msc->input->key) << 1 | + test_bit(BTN_MIDDLE, msc->input->key) << 2; if (emulate_3button) { int id; @@ -177,7 +177,7 @@ static void magicmouse_emit_touch(struct magicmouse_sc *msc, int raw_id, u8 *tda switch (tdata[7] & TOUCH_STATE_MASK) { case TOUCH_STATE_START: msc->touches[id].scroll_y = y; - msc->scroll_accel = min_t(int, msc->scroll_accel + 1, + msc->scroll_accel = min_t(int, msc->scroll_accel + 1, ARRAY_SIZE(accel_profile) - 1); break; case TOUCH_STATE_DRAG: @@ -193,7 +193,7 @@ static void magicmouse_emit_touch(struct magicmouse_sc *msc, int raw_id, u8 *tda /* Generate the input events for this touch. */ if (report_touches) { - int orientation = (misc >> 10) - 32; + int orientation = (misc >> 10) - 32; input_report_abs(input, ABS_MT_TRACKING_ID, id); input_report_abs(input, ABS_MT_TOUCH_MAJOR, tdata[3]); @@ -202,9 +202,8 @@ static void magicmouse_emit_touch(struct magicmouse_sc *msc, int raw_id, u8 *tda input_report_abs(input, ABS_MT_POSITION_X, x); input_report_abs(input, ABS_MT_POSITION_Y, y); - if (report_undeciphered) { + if (report_undeciphered) input_event(input, EV_MSC, MSC_RAW, tdata[7]); - } input_mt_sync(input); } @@ -291,62 +290,41 @@ static void magicmouse_setup_input(struct input_dev *input, struct hid_device *h input->id.version = hdev->version; input->dev.parent = hdev->dev.parent; - set_bit(EV_KEY, input->evbit); - set_bit(BTN_LEFT, input->keybit); - set_bit(BTN_RIGHT, input->keybit); + __set_bit(EV_KEY, input->evbit); + __set_bit(BTN_LEFT, input->keybit); + __set_bit(BTN_RIGHT, input->keybit); if (emulate_3button) - set_bit(BTN_MIDDLE, input->keybit); - set_bit(BTN_TOOL_FINGER, input->keybit); + __set_bit(BTN_MIDDLE, input->keybit); + __set_bit(BTN_TOOL_FINGER, input->keybit); - set_bit(EV_REL, input->evbit); - set_bit(REL_X, input->relbit); - set_bit(REL_Y, input->relbit); + __set_bit(EV_REL, input->evbit); + __set_bit(REL_X, input->relbit); + __set_bit(REL_Y, input->relbit); if (emulate_scroll_wheel) - set_bit(REL_WHEEL, input->relbit); + __set_bit(REL_WHEEL, input->relbit); if (report_touches) { - set_bit(EV_ABS, input->evbit); - - set_bit(ABS_MT_TRACKING_ID, input->absbit); - input->absmin[ABS_MT_TRACKING_ID] = 0; - input->absmax[ABS_MT_TRACKING_ID] = 15; - input->absfuzz[ABS_MT_TRACKING_ID] = 0; - - set_bit(ABS_MT_TOUCH_MAJOR, input->absbit); - input->absmin[ABS_MT_TOUCH_MAJOR] = 0; - input->absmax[ABS_MT_TOUCH_MAJOR] = 255; - input->absfuzz[ABS_MT_TOUCH_MAJOR] = 4; - - set_bit(ABS_MT_TOUCH_MINOR, input->absbit); - input->absmin[ABS_MT_TOUCH_MINOR] = 0; - input->absmax[ABS_MT_TOUCH_MINOR] = 255; - input->absfuzz[ABS_MT_TOUCH_MINOR] = 4; - - set_bit(ABS_MT_ORIENTATION, input->absbit); - input->absmin[ABS_MT_ORIENTATION] = -32; - input->absmax[ABS_MT_ORIENTATION] = 31; - input->absfuzz[ABS_MT_ORIENTATION] = 1; - - set_bit(ABS_MT_POSITION_X, input->absbit); - input->absmin[ABS_MT_POSITION_X] = -1100; - input->absmax[ABS_MT_POSITION_X] = 1358; - input->absfuzz[ABS_MT_POSITION_X] = 4; - + __set_bit(EV_ABS, input->evbit); + + input_set_abs_params(input, ABS_MT_TRACKING_ID, 0, 15, 0, 0); + input_set_abs_params(input, ABS_MT_TOUCH_MAJOR, 0, 255, 4, 0); + input_set_abs_params(input, ABS_MT_TOUCH_MINOR, 0, 255, 4, 0); + input_set_abs_params(input, ABS_MT_ORIENTATION, -32, 31, 1, 0); + input_set_abs_params(input, ABS_MT_POSITION_X, -1100, 1358, + 4, 0); /* Note: Touch Y position from the device is inverted relative * to how pointer motion is reported (and relative to how USB * HID recommends the coordinates work). This driver keeps * the origin at the same position, and just uses the additive * inverse of the reported Y. */ - set_bit(ABS_MT_POSITION_Y, input->absbit); - input->absmin[ABS_MT_POSITION_Y] = -1589; - input->absmax[ABS_MT_POSITION_Y] = 2047; - input->absfuzz[ABS_MT_POSITION_Y] = 4; + input_set_abs_params(input, ABS_MT_POSITION_Y, -1589, 2047, + 4, 0); } if (report_undeciphered) { - set_bit(EV_MSC, input->evbit); - set_bit(MSC_RAW, input->mscbit); + __set_bit(EV_MSC, input->evbit); + __set_bit(MSC_RAW, input->mscbit); } } @@ -385,7 +363,7 @@ static int magicmouse_probe(struct hid_device *hdev, if (!report) { dev_err(&hdev->dev, "unable to register touch report\n"); ret = -ENOMEM; - goto err_free; + goto err_stop_hw; } report->size = 6; @@ -394,35 +372,37 @@ static int magicmouse_probe(struct hid_device *hdev, if (ret != sizeof(feature_1)) { dev_err(&hdev->dev, "unable to request touch data (1:%d)\n", ret); - goto err_free; + goto err_stop_hw; } ret = hdev->hid_output_raw_report(hdev, feature_2, sizeof(feature_2), HID_FEATURE_REPORT); if (ret != sizeof(feature_2)) { dev_err(&hdev->dev, "unable to request touch data (2:%d)\n", ret); - goto err_free; + goto err_stop_hw; } input = input_allocate_device(); if (!input) { dev_err(&hdev->dev, "can't alloc input device\n"); ret = -ENOMEM; - goto err_free; + goto err_stop_hw; } magicmouse_setup_input(input, hdev); ret = input_register_device(input); if (ret) { dev_err(&hdev->dev, "input device registration failed\n"); - goto err_both; + goto err_input; } msc->input = input; return 0; - err_both: +err_input: input_free_device(input); - err_free: +err_stop_hw: + hid_hw_stop(hdev); +err_free: kfree(msc); return ret; } -- cgit v1.2.3