From 46a671430dfa4ca59c7a69f01326e99edddb21bd Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Tue, 4 Dec 2007 13:33:30 +0900 Subject: sata_promise: make pdc_atapi_pkt() use values from qc->tf Make pdc_atapi_pkt() use values from qc->tf instead of creating its own. This is to ease future ATAPI handling changes. Signed-off-by: Tejun Heo Cc: Mikael Pettersson Signed-off-by: Jeff Garzik --- drivers/ata/sata_promise.c | 34 +++++++++++++--------------------- 1 file changed, 13 insertions(+), 21 deletions(-) diff --git a/drivers/ata/sata_promise.c b/drivers/ata/sata_promise.c index 7914def54fa..9638faaa811 100644 --- a/drivers/ata/sata_promise.c +++ b/drivers/ata/sata_promise.c @@ -450,7 +450,7 @@ static void pdc_atapi_pkt(struct ata_queued_cmd *qc) struct pdc_port_priv *pp = ap->private_data; u8 *buf = pp->pkt; u32 *buf32 = (u32 *) buf; - unsigned int dev_sel, feature, nbytes; + unsigned int dev_sel, feature; /* set control bits (byte 0), zero delay seq id (byte 3), * and seq id (byte 2) @@ -473,45 +473,37 @@ static void pdc_atapi_pkt(struct ata_queued_cmd *qc) buf32[2] = 0; /* no next-packet */ /* select drive */ - if (sata_scr_valid(&ap->link)) { + if (sata_scr_valid(&ap->link)) dev_sel = PDC_DEVICE_SATA; - } else { - dev_sel = ATA_DEVICE_OBS; - if (qc->dev->devno != 0) - dev_sel |= ATA_DEV1; - } + else + dev_sel = qc->tf.device; + buf[12] = (1 << 5) | ATA_REG_DEVICE; buf[13] = dev_sel; buf[14] = (1 << 5) | ATA_REG_DEVICE | PDC_PKT_CLEAR_BSY; buf[15] = dev_sel; /* once more, waiting for BSY to clear */ buf[16] = (1 << 5) | ATA_REG_NSECT; - buf[17] = 0x00; + buf[17] = qc->tf.nsect; buf[18] = (1 << 5) | ATA_REG_LBAL; - buf[19] = 0x00; + buf[19] = qc->tf.lbal; /* set feature and byte counter registers */ - if (qc->tf.protocol != ATA_PROT_ATAPI_DMA) { + if (qc->tf.protocol != ATA_PROT_ATAPI_DMA) feature = PDC_FEATURE_ATAPI_PIO; - /* set byte counter register to real transfer byte count */ - nbytes = qc->nbytes; - if (nbytes > 0xffff) - nbytes = 0xffff; - } else { + else feature = PDC_FEATURE_ATAPI_DMA; - /* set byte counter register to 0 */ - nbytes = 0; - } + buf[20] = (1 << 5) | ATA_REG_FEATURE; buf[21] = feature; buf[22] = (1 << 5) | ATA_REG_BYTEL; - buf[23] = nbytes & 0xFF; + buf[23] = qc->tf.lbam; buf[24] = (1 << 5) | ATA_REG_BYTEH; - buf[25] = (nbytes >> 8) & 0xFF; + buf[25] = qc->tf.lbah; /* send ATAPI packet command 0xA0 */ buf[26] = (1 << 5) | ATA_REG_CMD; - buf[27] = ATA_CMD_PACKET; + buf[27] = qc->tf.command; /* select drive and check DRQ */ buf[28] = (1 << 5) | ATA_REG_DEVICE | PDC_PKT_WAIT_DRDY; -- cgit v1.2.3