From 6cbdc8c5357276307a77deeada3f04626ff17da6 Mon Sep 17 00:00:00 2001 From: Simon Arlott Date: Fri, 11 May 2007 20:40:30 +0100 Subject: [ARM] spelling fixes Spelling fixes in arch/arm/. Signed-off-by: Simon Arlott Signed-off-by: Russell King --- arch/arm/common/dmabounce.c | 2 +- arch/arm/common/gic.c | 2 +- arch/arm/common/sharpsl_param.c | 2 +- arch/arm/common/sharpsl_pm.c | 10 +++++----- arch/arm/kernel/sys_arm.c | 2 +- arch/arm/lib/bitops.h | 2 +- arch/arm/mach-at91/board-carmeva.c | 8 ++++---- arch/arm/mach-h720x/cpu-h7202.c | 4 ++-- arch/arm/mach-imx/cpufreq.c | 2 +- arch/arm/mach-imx/dma.c | 8 ++++---- arch/arm/mach-iop13xx/pci.c | 2 +- arch/arm/mach-ixp2000/enp2611.c | 2 +- arch/arm/mach-ixp2000/ixdp2x00.c | 4 ++-- arch/arm/mach-ixp2000/ixdp2x01.c | 6 +++--- arch/arm/mach-ixp2000/pci.c | 2 +- arch/arm/mach-ixp23xx/core.c | 2 +- arch/arm/mach-ixp4xx/gtwx5715-setup.c | 2 +- arch/arm/mach-lh7a40x/lcd-panel.h | 6 +++--- arch/arm/mach-ns9xxx/time.c | 2 +- arch/arm/mach-omap1/board-osk.c | 2 +- arch/arm/mach-omap1/board-palmte.c | 2 +- arch/arm/mach-omap1/pm.c | 2 +- arch/arm/mach-omap2/clock.c | 2 +- arch/arm/mach-omap2/clock.h | 4 ++-- arch/arm/mach-pxa/corgi_lcd.c | 10 +++++----- arch/arm/mach-pxa/corgi_ssp.c | 2 +- arch/arm/mach-realview/localtimer.c | 2 +- arch/arm/mach-s3c2440/mach-osiris.c | 2 +- arch/arm/mach-sa1100/time.c | 2 +- arch/arm/mm/alignment.c | 2 +- arch/arm/mm/ioremap.c | 2 +- arch/arm/mm/mmu.c | 2 +- arch/arm/plat-iop/pci.c | 2 +- arch/arm/plat-omap/common.c | 2 +- arch/arm/plat-omap/dma.c | 2 +- arch/arm/plat-omap/sram.c | 6 +++--- arch/arm/plat-omap/usb.c | 2 +- arch/arm/plat-s3c24xx/dma.c | 2 +- arch/arm/plat-s3c24xx/pm.c | 2 +- 39 files changed, 62 insertions(+), 62 deletions(-) diff --git a/arch/arm/common/dmabounce.c b/arch/arm/common/dmabounce.c index 6fbe7722aa4..b36b1e8a105 100644 --- a/arch/arm/common/dmabounce.c +++ b/arch/arm/common/dmabounce.c @@ -6,7 +6,7 @@ * copy data to/from buffers located outside the DMA region. This * only works for systems in which DMA memory is at the bottom of * RAM, the remainder of memory is at the top and the DMA memory - * can be marked as ZONE_DMA. Anything beyond that such as discontigous + * can be marked as ZONE_DMA. Anything beyond that such as discontiguous * DMA windows will require custom implementations that reserve memory * areas at early bootup. * diff --git a/arch/arm/common/gic.c b/arch/arm/common/gic.c index 2ae0bd1c907..0c89bd35e06 100644 --- a/arch/arm/common/gic.c +++ b/arch/arm/common/gic.c @@ -72,7 +72,7 @@ static inline unsigned int gic_irq(unsigned int irq) * unmask it, in the same way we need to unmask an interrupt when * we first enable it. * - * The GIC has a seperate notion of "end of interrupt" to re-enable + * The GIC has a separate notion of "end of interrupt" to re-enable * an interrupt after handling, in order to support hardware * prioritisation. * diff --git a/arch/arm/common/sharpsl_param.c b/arch/arm/common/sharpsl_param.c index c94864c5b1a..aad4d94ba8f 100644 --- a/arch/arm/common/sharpsl_param.c +++ b/arch/arm/common/sharpsl_param.c @@ -20,7 +20,7 @@ * typically including LCD parameters are loaded by the bootloader at the * address PARAM_BASE. As the kernel will overwrite them, we need to store * them early in the boot process, then pass them to the appropriate drivers. - * Not all devices use all paramaters but the format is common to all. + * Not all devices use all parameters but the format is common to all. */ #ifdef CONFIG_ARCH_SA1100 #define PARAM_BASE 0xe8ffc000 diff --git a/arch/arm/common/sharpsl_pm.c b/arch/arm/common/sharpsl_pm.c index c8e78d96e59..3bf3a927ae2 100644 --- a/arch/arm/common/sharpsl_pm.c +++ b/arch/arm/common/sharpsl_pm.c @@ -291,7 +291,7 @@ static void sharpsl_chrg_full_timer(unsigned long data) } /* Charging Finished Interrupt (Not present on Corgi) */ -/* Can trigger at the same time as an AC staus change so +/* Can trigger at the same time as an AC status change so delay until after that has been processed */ irqreturn_t sharpsl_chrg_full_isr(int irq, void *dev_id) { @@ -635,7 +635,7 @@ static int sharpsl_fatal_check(void) static int sharpsl_off_charge_error(void) { - dev_err(sharpsl_pm.dev, "Offline Charger: Error occured.\n"); + dev_err(sharpsl_pm.dev, "Offline Charger: Error occurred.\n"); sharpsl_pm.machinfo->charge(0); sharpsl_pm_led(SHARPSL_LED_ERROR); sharpsl_pm.charge_mode = CHRG_ERROR; @@ -691,14 +691,14 @@ static int sharpsl_off_charge_battery(void) time = RCNR; while(1) { - /* Check if any wakeup event had occured */ + /* Check if any wakeup event had occurred */ if (sharpsl_pm.machinfo->charger_wakeup() != 0) return 0; /* Check for timeout */ if ((RCNR - time) > SHARPSL_WAIT_CO_TIME) return 1; if (sharpsl_pm.machinfo->read_devdata(SHARPSL_STATUS_CHRGFULL)) { - dev_dbg(sharpsl_pm.dev, "Offline Charger: Charge full occured. Retrying to check\n"); + dev_dbg(sharpsl_pm.dev, "Offline Charger: Charge full occurred. Retrying to check\n"); sharpsl_pm.full_count++; sharpsl_pm.machinfo->charge(0); mdelay(SHARPSL_CHARGE_WAIT_TIME); @@ -714,7 +714,7 @@ static int sharpsl_off_charge_battery(void) time = RCNR; while(1) { - /* Check if any wakeup event had occured */ + /* Check if any wakeup event had occurred */ if (sharpsl_pm.machinfo->charger_wakeup() != 0) return 0; /* Check for timeout */ diff --git a/arch/arm/kernel/sys_arm.c b/arch/arm/kernel/sys_arm.c index 3d4fcbc1627..1ca2d5174fc 100644 --- a/arch/arm/kernel/sys_arm.c +++ b/arch/arm/kernel/sys_arm.c @@ -320,7 +320,7 @@ int kernel_execve(const char *filename, char *const argv[], char *const envp[]) EXPORT_SYMBOL(kernel_execve); /* - * Since loff_t is a 64 bit type we avoid a lot of ABI hastle + * Since loff_t is a 64 bit type we avoid a lot of ABI hassle * with a different argument ordering. */ asmlinkage long sys_arm_fadvise64_64(int fd, int advice, diff --git a/arch/arm/lib/bitops.h b/arch/arm/lib/bitops.h index 54225102174..2e787d40d59 100644 --- a/arch/arm/lib/bitops.h +++ b/arch/arm/lib/bitops.h @@ -47,7 +47,7 @@ * @store: store instruction * * Note: we can trivially conditionalise the store instruction - * to avoid dirting the data cache. + * to avoid dirtying the data cache. */ .macro testop, instr, store add r1, r1, r0, lsr #3 diff --git a/arch/arm/mach-at91/board-carmeva.c b/arch/arm/mach-at91/board-carmeva.c index b4518619063..76ec856cd4f 100644 --- a/arch/arm/mach-at91/board-carmeva.c +++ b/arch/arm/mach-at91/board-carmeva.c @@ -79,7 +79,7 @@ static struct at91_udc_data __initdata carmeva_udc_data = { .pullup_pin = AT91_PIN_PD9, }; -/* FIXME: user dependend */ +/* FIXME: user dependant */ // static struct at91_cf_data __initdata carmeva_cf_data = { // .det_pin = AT91_PIN_PB0, // .rst_pin = AT91_PIN_PC5, @@ -100,17 +100,17 @@ static struct spi_board_info carmeva_spi_devices[] = { .chip_select = 0, .max_speed_hz = 10 * 1000 * 1000, }, - { /* User accessable spi - cs1 (250KHz) */ + { /* User accessible spi - cs1 (250KHz) */ .modalias = "spi-cs1", .chip_select = 1, .max_speed_hz = 250 * 1000, }, - { /* User accessable spi - cs2 (1MHz) */ + { /* User accessible spi - cs2 (1MHz) */ .modalias = "spi-cs2", .chip_select = 2, .max_speed_hz = 1 * 1000 * 1000, }, - { /* User accessable spi - cs3 (10MHz) */ + { /* User accessible spi - cs3 (10MHz) */ .modalias = "spi-cs3", .chip_select = 3, .max_speed_hz = 10 * 1000 * 1000, diff --git a/arch/arm/mach-h720x/cpu-h7202.c b/arch/arm/mach-h720x/cpu-h7202.c index 82e420d6fd1..0a1a25fb8ba 100644 --- a/arch/arm/mach-h720x/cpu-h7202.c +++ b/arch/arm/mach-h720x/cpu-h7202.c @@ -143,7 +143,7 @@ h7202_timer_interrupt(int irq, void *dev_id) } /* - * mask multiplexed timer irq's + * mask multiplexed timer IRQs */ static void inline mask_timerx_irq (u32 irq) { @@ -153,7 +153,7 @@ static void inline mask_timerx_irq (u32 irq) } /* - * unmask multiplexed timer irq's + * unmask multiplexed timer IRQs */ static void inline unmask_timerx_irq (u32 irq) { diff --git a/arch/arm/mach-imx/cpufreq.c b/arch/arm/mach-imx/cpufreq.c index 7e70e0b0b98..467d899fbe7 100644 --- a/arch/arm/mach-imx/cpufreq.c +++ b/arch/arm/mach-imx/cpufreq.c @@ -245,7 +245,7 @@ static int imx_set_target(struct cpufreq_policy *policy, if(mpctl0) { CSCR |= CSCR_MPLL_RESTART; - /* Wait until MPLL is stablized */ + /* Wait until MPLL is stabilized */ while( CSCR & CSCR_MPLL_RESTART ); imx_set_async_mode(); diff --git a/arch/arm/mach-imx/dma.c b/arch/arm/mach-imx/dma.c index 6d50d85a618..bc6fb02d213 100644 --- a/arch/arm/mach-imx/dma.c +++ b/arch/arm/mach-imx/dma.c @@ -131,7 +131,7 @@ imx_dma_setup_sg_base(imx_dmach_t dma_ch, * The function setups DMA channel source and destination addresses for transfer * specified by provided parameters. The scatter-gather emulation is disabled, * because linear data block - * form the physical address range is transfered. + * form the physical address range is transferred. * Return value: if incorrect parameters are provided -%EINVAL. * Zero indicates success. */ @@ -192,7 +192,7 @@ imx_dma_setup_single(imx_dmach_t dma_ch, dma_addr_t dma_address, * @dmamode: DMA transfer mode, %DMA_MODE_READ from the device to the memory * or %DMA_MODE_WRITE from memory to the device * - * The function setups DMA channel state and registers to be ready for transfer + * The function sets up DMA channel state and registers to be ready for transfer * specified by provided parameters. The scatter-gather emulation is set up * according to the parameters. * @@ -212,7 +212,7 @@ imx_dma_setup_single(imx_dmach_t dma_ch, dma_addr_t dma_address, * * %CCR_SMOD_LINEAR | %CCR_SSIZ_32 | %CCR_DMOD_FIFO | %CCR_DSIZ_x * - * Be carefull there and do not mistakenly mix source and target device + * Be careful here and do not mistakenly mix source and target device * port sizes constants, they are really different: * %CCR_SSIZ_8, %CCR_SSIZ_16, %CCR_SSIZ_32, * %CCR_DSIZ_8, %CCR_DSIZ_16, %CCR_DSIZ_32 @@ -495,7 +495,7 @@ static irqreturn_t dma_err_handler(int irq, void *dev_id) /* * The cleaning of @sg field would be questionable * there, because its value can help to compute - * remaining/transfered bytes count in the handler + * remaining/transferred bytes count in the handler */ /*imx_dma_channels[i].sg = NULL;*/ diff --git a/arch/arm/mach-iop13xx/pci.c b/arch/arm/mach-iop13xx/pci.c index 69e8953832f..306f82ee57f 100644 --- a/arch/arm/mach-iop13xx/pci.c +++ b/arch/arm/mach-iop13xx/pci.c @@ -989,7 +989,7 @@ void __init iop13xx_pci_init(void) "imprecise external abort"); } -/* intialize the pci memory space. handle any combination of +/* initialize the pci memory space. handle any combination of * atue and atux enabled/disabled */ int iop13xx_pci_setup(int nr, struct pci_sys_data *sys) diff --git a/arch/arm/mach-ixp2000/enp2611.c b/arch/arm/mach-ixp2000/enp2611.c index 500e997ba7a..9c49435d42c 100644 --- a/arch/arm/mach-ixp2000/enp2611.c +++ b/arch/arm/mach-ixp2000/enp2611.c @@ -198,7 +198,7 @@ subsys_initcall(enp2611_pci_init); /************************************************************************* - * ENP-2611 Machine Intialization + * ENP-2611 Machine Initialization *************************************************************************/ static struct flash_platform_data enp2611_flash_platform_data = { .map_name = "cfi_probe", diff --git a/arch/arm/mach-ixp2000/ixdp2x00.c b/arch/arm/mach-ixp2000/ixdp2x00.c index 52b368b3434..011065b967b 100644 --- a/arch/arm/mach-ixp2000/ixdp2x00.c +++ b/arch/arm/mach-ixp2000/ixdp2x00.c @@ -195,7 +195,7 @@ void __init ixdp2x00_map_io(void) * instances of the kernel. So far so good. Peers on the PCI bus running * Linux is a common design in telecom systems. The problem is that instead * of all the devices being controlled by a single host, different - * devices are controlles by different NPUs on the same bus, leading to + * devices are controlled by different NPUs on the same bus, leading to * multiple hosts on the bus. The exact bus layout looks like: * * Bus 0 @@ -211,7 +211,7 @@ void __init ixdp2x00_map_io(void) * | | | | | * ... Dev PMC Media Eth0 Eth1 ... * - * The master controlls all but Eth1, which is controlled by the + * The master controls all but Eth1, which is controlled by the * slave. What this means is that the both the master and the slave * have to scan the bus, but only one of them can enumerate the bus. * In addition, after the bus is scanned, each kernel must remove diff --git a/arch/arm/mach-ixp2000/ixdp2x01.c b/arch/arm/mach-ixp2000/ixdp2x01.c index 3084a5fa751..d3d730d2fc2 100644 --- a/arch/arm/mach-ixp2000/ixdp2x01.c +++ b/arch/arm/mach-ixp2000/ixdp2x01.c @@ -276,7 +276,7 @@ static int __init ixdp2x01_pci_map_irq(struct pci_dev *dev, u8 slot, u8 pin) /* Device is located after first MB bridge */ case 0x0008: if (tmp_bus == dev->bus) { - /* Device is located directy after first MB bridge */ + /* Device is located directly after first MB bridge */ switch (devpin) { case DEVPIN(1, 1): /* Onboard 82546 ch 0 */ if (machine_is_ixdp2401()) @@ -299,7 +299,7 @@ static int __init ixdp2x01_pci_map_irq(struct pci_dev *dev, u8 slot, u8 pin) break; case 0x0010: if (tmp_bus == dev->bus) { - /* Device is located directy after second MB bridge */ + /* Device is located directly after second MB bridge */ /* Secondary bus of second bridge */ switch (devpin) { case DEVPIN(0, 1): /* DB#0 */ @@ -348,7 +348,7 @@ int __init ixdp2x01_pci_init(void) subsys_initcall(ixdp2x01_pci_init); /************************************************************************* - * IXDP2x01 Machine Intialization + * IXDP2x01 Machine Initialization *************************************************************************/ static struct flash_platform_data ixdp2x01_flash_platform_data = { .map_name = "cfi_probe", diff --git a/arch/arm/mach-ixp2000/pci.c b/arch/arm/mach-ixp2000/pci.c index 5a09a90c08f..03f4cf7f9de 100644 --- a/arch/arm/mach-ixp2000/pci.c +++ b/arch/arm/mach-ixp2000/pci.c @@ -102,7 +102,7 @@ int ixp2000_pci_read_config(struct pci_bus *bus, unsigned int devfn, int where, } /* - * We don't do error checks by callling clear_master_aborts() b/c the + * We don't do error checks by calling clear_master_aborts() b/c the * assumption is that the caller did a read first to make sure a device * exists. */ diff --git a/arch/arm/mach-ixp23xx/core.c b/arch/arm/mach-ixp23xx/core.c index b644bbab7d0..16356ffc86a 100644 --- a/arch/arm/mach-ixp23xx/core.c +++ b/arch/arm/mach-ixp23xx/core.c @@ -389,7 +389,7 @@ struct sys_timer ixp23xx_timer = { /************************************************************************* - * IXP23xx Platform Initializaion + * IXP23xx Platform Initialization *************************************************************************/ static struct resource ixp23xx_uart_resources[] = { { diff --git a/arch/arm/mach-ixp4xx/gtwx5715-setup.c b/arch/arm/mach-ixp4xx/gtwx5715-setup.c index 30f1300e0e2..dc6725bda3c 100644 --- a/arch/arm/mach-ixp4xx/gtwx5715-setup.c +++ b/arch/arm/mach-ixp4xx/gtwx5715-setup.c @@ -1,7 +1,7 @@ /* * arch/arm/mach-ixp4xx/gtwx5715-setup.c * - * Gemtek GTWX5715 (Linksys WRV54G) board settup + * Gemtek GTWX5715 (Linksys WRV54G) board setup * * Copyright (C) 2004 George T. Joseph * Derived from Coyote diff --git a/arch/arm/mach-lh7a40x/lcd-panel.h b/arch/arm/mach-lh7a40x/lcd-panel.h index 4fb2efc4950..df6e38ed425 100644 --- a/arch/arm/mach-lh7a40x/lcd-panel.h +++ b/arch/arm/mach-lh7a40x/lcd-panel.h @@ -126,7 +126,7 @@ static struct clcd_panel_extra lcd_panel_extra = { */ -/* The full horozontal cycle (Th) is clock/360/400/450. */ +/* The full horizontal cycle (Th) is clock/360/400/450. */ /* The full vertical cycle (Tv) is line/251/262/280. */ #define PIX_CLOCK_TARGET (6300000) /* -/6.3/7 MHz */ @@ -162,7 +162,7 @@ static struct clcd_panel lcd_panel = { /* Logic Product Development LCD 6.4" VGA -10 */ /* Sharp PN LQ64D343 */ -/* The full horozontal cycle (Th) is clock/750/800/900. */ +/* The full horizontal cycle (Th) is clock/750/800/900. */ /* The full vertical cycle (Tv) is line/515/525/560. */ #define PIX_CLOCK_TARGET (28330000) @@ -243,7 +243,7 @@ static struct clcd_panel lcd_panel = { * (fdisk, e2fsck). And, at that speed the display may have a visible * flicker. */ -/* The full horozontal cycle (Th) is clock/832/1056/1395. */ +/* The full horizontal cycle (Th) is clock/832/1056/1395. */ #define PIX_CLOCK_TARGET (20000000) #define PIX_CLOCK_DIVIDER CLOCK_TO_DIV (PIX_CLOCK_TARGET, HCLK) diff --git a/arch/arm/mach-ns9xxx/time.c b/arch/arm/mach-ns9xxx/time.c index dd257084441..b97d0c54a38 100644 --- a/arch/arm/mach-ns9xxx/time.c +++ b/arch/arm/mach-ns9xxx/time.c @@ -35,7 +35,7 @@ static unsigned long ns9xxx_timer_gettimeoffset(void) { /* return the microseconds which have passed since the last interrupt * was _serviced_. That is, if an interrupt is pending or the counter - * reloads, return one periode more. */ + * reloads, return one period more. */ u32 counter1 = SYS_TR(0); int pending = SYS_ISR & (1 << IRQ_TIMER0); diff --git a/arch/arm/mach-omap1/board-osk.c b/arch/arm/mach-omap1/board-osk.c index 7d0cf7af88c..e7130293a03 100644 --- a/arch/arm/mach-omap1/board-osk.c +++ b/arch/arm/mach-omap1/board-osk.c @@ -385,7 +385,7 @@ static void __init osk_init(void) /* Workaround for wrong CS3 (NOR flash) timing * There are some U-Boot versions out there which configure * wrong CS3 memory timings. This mainly leads to CRC - * or similiar errors if you use NOR flash (e.g. with JFFS2) + * or similar errors if you use NOR flash (e.g. with JFFS2) */ if (EMIFS_CCS(3) != EMIFS_CS3_VAL) EMIFS_CCS(3) = EMIFS_CS3_VAL; diff --git a/arch/arm/mach-omap1/board-palmte.c b/arch/arm/mach-omap1/board-palmte.c index 4bc8a62909b..01582418562 100644 --- a/arch/arm/mach-omap1/board-palmte.c +++ b/arch/arm/mach-omap1/board-palmte.c @@ -7,7 +7,7 @@ * * Original version : Laurent Gonzalez * - * Maintainters : http://palmtelinux.sf.net + * Maintainers : http://palmtelinux.sf.net * palmtelinux-developpers@lists.sf.net * * This program is free software; you can redistribute it and/or modify diff --git a/arch/arm/mach-omap1/pm.c b/arch/arm/mach-omap1/pm.c index 8caee68aa09..5bb348e2e31 100644 --- a/arch/arm/mach-omap1/pm.c +++ b/arch/arm/mach-omap1/pm.c @@ -438,7 +438,7 @@ void omap_pm_suspend(void) omap_writew(0, ULPD_SOFT_DISABLE_REQ_REG); /* - * Reenable interrupts + * Re-enable interrupts */ local_irq_enable(); diff --git a/arch/arm/mach-omap2/clock.c b/arch/arm/mach-omap2/clock.c index 5170481afea..588adb5ab47 100644 --- a/arch/arm/mach-omap2/clock.c +++ b/arch/arm/mach-omap2/clock.c @@ -443,7 +443,7 @@ static long omap2_clk_round_rate(struct clk *clk, unsigned long rate) /* * Check the DLL lock state, and return tue if running in unlock mode. - * This is needed to compenste for the shifted DLL value in unlock mode. + * This is needed to compensate for the shifted DLL value in unlock mode. */ static u32 omap2_dll_force_needed(void) { diff --git a/arch/arm/mach-omap2/clock.h b/arch/arm/mach-omap2/clock.h index 162978fd535..4f791866b91 100644 --- a/arch/arm/mach-omap2/clock.h +++ b/arch/arm/mach-omap2/clock.h @@ -338,7 +338,7 @@ struct prcm_config { /* * These represent optimal values for common parts, it won't work for all. * As long as you scale down, most parameters are still work, they just - * become sub-optimal. The RFR value goes in the oppisite direction. If you + * become sub-optimal. The RFR value goes in the opposite direction. If you * don't adjust it down as your clock period increases the refresh interval * will not be met. Setting all parameters for complete worst case may work, * but may cut memory performance by 2x. Due to errata the DLLs need to be @@ -384,7 +384,7 @@ struct prcm_config { * Filling in table based on H4 boards and 2430-SDPs variants available. * There are quite a few more rates combinations which could be defined. * - * When multiple values are defiend the start up will try and choose the + * When multiple values are defined the start up will try and choose the * fastest one. If a 'fast' value is defined, then automatically, the /2 * one should be included as it can be used. Generally having more that * one fast set does not make sense, as static timings need to be changed diff --git a/arch/arm/mach-pxa/corgi_lcd.c b/arch/arm/mach-pxa/corgi_lcd.c index a72476c2462..365b9435f74 100644 --- a/arch/arm/mach-pxa/corgi_lcd.c +++ b/arch/arm/mach-pxa/corgi_lcd.c @@ -40,7 +40,7 @@ #define PICTRL_ADRS 0x06 #define POLCTRL_ADRS 0x07 -/* Resgister Bit Definitions */ +/* Register Bit Definitions */ #define RESCTL_QVGA 0x01 #define RESCTL_VGA 0x00 @@ -55,11 +55,11 @@ #define POWER0_COM_DCLK 0x01 /* COM Voltage DC Bias DAC Serial Data Clock */ #define POWER0_COM_DOUT 0x02 /* COM Voltage DC Bias DAC Serial Data Out */ #define POWER0_DAC_ON 0x04 /* DAC Power Supply ON */ -#define POWER0_COM_ON 0x08 /* COM Powewr Supply ON */ +#define POWER0_COM_ON 0x08 /* COM Power Supply ON */ #define POWER0_VCC5_ON 0x10 /* VCC5 Power Supply ON */ #define POWER0_DAC_OFF 0x00 /* DAC Power Supply OFF */ -#define POWER0_COM_OFF 0x00 /* COM Powewr Supply OFF */ +#define POWER0_COM_OFF 0x00 /* COM Power Supply OFF */ #define POWER0_VCC5_OFF 0x00 /* VCC5 Power Supply OFF */ #define PICTRL_INIT_STATE 0x01 @@ -145,7 +145,7 @@ static void lcdtg_set_common_voltage(u8 base_data, u8 data) lcdtg_i2c_send_stop(base_data); } -/* Set Phase Adjuct */ +/* Set Phase Adjust */ static void lcdtg_set_phadadj(int mode) { int adj; @@ -226,7 +226,7 @@ static void lcdtg_hw_init(int mode) /* Signals output enable */ corgi_ssp_lcdtg_send(PICTRL_ADRS, 0); - /* Set Phase Adjuct */ + /* Set Phase Adjust */ lcdtg_set_phadadj(mode); /* Initialize for Input Signals from ATI */ diff --git a/arch/arm/mach-pxa/corgi_ssp.c b/arch/arm/mach-pxa/corgi_ssp.c index ff6b4ee037f..40dea3d5142 100644 --- a/arch/arm/mach-pxa/corgi_ssp.c +++ b/arch/arm/mach-pxa/corgi_ssp.c @@ -32,7 +32,7 @@ static struct corgissp_machinfo *ssp_machinfo; * There are three devices connected to the SSP interface: * 1. A touchscreen controller (TI ADS7846 compatible) * 2. An LCD contoller (with some Backlight functionality) - * 3. A battery moinitoring IC (Maxim MAX1111) + * 3. A battery monitoring IC (Maxim MAX1111) * * Each device uses a different speed/mode of communication. * diff --git a/arch/arm/mach-realview/localtimer.c b/arch/arm/mach-realview/localtimer.c index caf6b8bb6c9..c7bdf04ab09 100644 --- a/arch/arm/mach-realview/localtimer.c +++ b/arch/arm/mach-realview/localtimer.c @@ -30,7 +30,7 @@ static unsigned long mpcore_timer_rate; /* * local_timer_ack: checks for a local timer interrupt. * - * If a local timer interrupt has occured, acknowledge and return 1. + * If a local timer interrupt has occurred, acknowledge and return 1. * Otherwise, return 0. */ int local_timer_ack(void) diff --git a/arch/arm/mach-s3c2440/mach-osiris.c b/arch/arm/mach-s3c2440/mach-osiris.c index 324f5a23792..4d6c7a574c1 100644 --- a/arch/arm/mach-s3c2440/mach-osiris.c +++ b/arch/arm/mach-s3c2440/mach-osiris.c @@ -45,7 +45,7 @@ #include #include -/* onboard perihpheral map */ +/* onboard perihperal map */ static struct map_desc osiris_iodesc[] __initdata = { /* ISA IO areas (may be over-written later) */ diff --git a/arch/arm/mach-sa1100/time.c b/arch/arm/mach-sa1100/time.c index 416e277054c..29cb0c1604a 100644 --- a/arch/arm/mach-sa1100/time.c +++ b/arch/arm/mach-sa1100/time.c @@ -25,7 +25,7 @@ static unsigned long __init sa1100_get_rtc_time(void) { /* * According to the manual we should be able to let RTTR be zero - * and then a default diviser for a 32.768KHz clock is used. + * and then a default divisor for a 32.768KHz clock is used. * Apparently this doesn't work, at least for my SA1110 rev 5. * If the clock divider is uninitialized then reset it to the * default value to get the 1Hz clock. diff --git a/arch/arm/mm/alignment.c b/arch/arm/mm/alignment.c index 19ca333240e..36440c89958 100644 --- a/arch/arm/mm/alignment.c +++ b/arch/arm/mm/alignment.c @@ -3,7 +3,7 @@ * * Copyright (C) 1995 Linus Torvalds * Modifications for ARM processor (c) 1995-2001 Russell King - * Thumb aligment fault fixups (c) 2004 MontaVista Software, Inc. + * Thumb alignment fault fixups (c) 2004 MontaVista Software, Inc. * - Adapted from gdb/sim/arm/thumbemu.c -- Thumb instruction emulation. * Copyright (C) 1996, Cygnus Software Technologies Ltd. * diff --git a/arch/arm/mm/ioremap.c b/arch/arm/mm/ioremap.c index d6167ad4e01..f3ade18862a 100644 --- a/arch/arm/mm/ioremap.c +++ b/arch/arm/mm/ioremap.c @@ -346,7 +346,7 @@ void __iounmap(volatile void __iomem *addr) #ifndef CONFIG_SMP /* * If this is a section based mapping we need to handle it - * specially as the VM subysystem does not know how to handle + * specially as the VM subsystem does not know how to handle * such a beast. We need the lock here b/c we need to clear * all the mappings before the area can be reclaimed * by someone else. diff --git a/arch/arm/mm/mmu.c b/arch/arm/mm/mmu.c index 2ba1530d1ce..02e050ae59f 100644 --- a/arch/arm/mm/mmu.c +++ b/arch/arm/mm/mmu.c @@ -92,7 +92,7 @@ static struct cachepolicy cache_policies[] __initdata = { }; /* - * These are useful for identifing cache coherency + * These are useful for identifying cache coherency * problems by allowing the cache or the cache and * writebuffer to be turned off. (Note: the write * buffer should not be on and the cache off). diff --git a/arch/arm/plat-iop/pci.c b/arch/arm/plat-iop/pci.c index d3605934f1c..c200c281006 100644 --- a/arch/arm/plat-iop/pci.c +++ b/arch/arm/plat-iop/pci.c @@ -85,7 +85,7 @@ static int iop3xx_pci_status(void) /* * Simply write the address register and read the configuration - * data. Note that the 4 nop's ensure that we are able to handle + * data. Note that the 4 nops ensure that we are able to handle * a delayed abort (in theory.) */ static u32 iop3xx_read(unsigned long addr) diff --git a/arch/arm/plat-omap/common.c b/arch/arm/plat-omap/common.c index dd8708ad0a7..7987aa6e95f 100644 --- a/arch/arm/plat-omap/common.c +++ b/arch/arm/plat-omap/common.c @@ -73,7 +73,7 @@ static const void *get_config(u16 tag, size_t len, int skip, size_t *len_out) } if (info != NULL) { /* Check the length as a lame attempt to check for - * binary inconsistancy. */ + * binary inconsistency. */ if (len != NO_LENGTH_CHECK) { /* Word-align len */ if (len & 0x03) diff --git a/arch/arm/plat-omap/dma.c b/arch/arm/plat-omap/dma.c index 55a4d3be16b..88d5b6d9f95 100644 --- a/arch/arm/plat-omap/dma.c +++ b/arch/arm/plat-omap/dma.c @@ -1172,7 +1172,7 @@ static void set_b1_regs(void) break; default: BUG(); - return; /* Supress warning about uninitialized vars */ + return; /* Suppress warning about uninitialized vars */ } if (omap_dma_in_1510_mode()) { diff --git a/arch/arm/plat-omap/sram.c b/arch/arm/plat-omap/sram.c index bc46f33aede..1f23f0459e5 100644 --- a/arch/arm/plat-omap/sram.c +++ b/arch/arm/plat-omap/sram.c @@ -59,8 +59,8 @@ extern unsigned long omapfb_reserve_sram(unsigned long sram_pstart, /* * Depending on the target RAMFS firewall setup, the public usable amount of - * SRAM varies. The default accessable size for all device types is 2k. A GP - * device allows ARM11 but not other initators for full size. This + * SRAM varies. The default accessible size for all device types is 2k. A GP + * device allows ARM11 but not other initiators for full size. This * functionality seems ok until some nice security API happens. */ static int is_sram_locked(void) @@ -71,7 +71,7 @@ static int is_sram_locked(void) type = __raw_readl(VA_CONTROL_STAT) & TYPE_MASK; if (type == GP_DEVICE) { - /* RAMFW: R/W access to all initators for all qualifier sets */ + /* RAMFW: R/W access to all initiators for all qualifier sets */ if (cpu_is_omap242x()) { __raw_writel(0xFF, VA_REQINFOPERM0); /* all q-vects */ __raw_writel(0xCFDE, VA_READPERM0); /* all i-read */ diff --git a/arch/arm/plat-omap/usb.c b/arch/arm/plat-omap/usb.c index 25489aafb11..a5aedf964b8 100644 --- a/arch/arm/plat-omap/usb.c +++ b/arch/arm/plat-omap/usb.c @@ -177,7 +177,7 @@ static u32 __init omap_usb0_init(unsigned nwires, unsigned is_device) /* NOTE: SPEED and SUSP aren't configured here. OTG hosts * may be able to use I2C requests to set those bits along - * with VBUS switching and overcurrent detction. + * with VBUS switching and overcurrent detection. */ if (cpu_class_is_omap1() && nwires != 6) diff --git a/arch/arm/plat-s3c24xx/dma.c b/arch/arm/plat-s3c24xx/dma.c index 6f03c937097..08d80f2f51f 100644 --- a/arch/arm/plat-s3c24xx/dma.c +++ b/arch/arm/plat-s3c24xx/dma.c @@ -1153,7 +1153,7 @@ EXPORT_SYMBOL(s3c2410_dma_set_buffdone_fn); * * hwcfg: the value for xxxSTCn register, * bit 0: 0=increment pointer, 1=leave pointer - * bit 1: 0=soucre is AHB, 1=soucre is APB + * bit 1: 0=source is AHB, 1=source is APB * * devaddr: physical address of the source */ diff --git a/arch/arm/plat-s3c24xx/pm.c b/arch/arm/plat-s3c24xx/pm.c index c6b03f8ab26..5692eccdf4d 100644 --- a/arch/arm/plat-s3c24xx/pm.c +++ b/arch/arm/plat-s3c24xx/pm.c @@ -555,7 +555,7 @@ static int s3c2410_pm_enter(suspend_state_t state) __raw_writel(__raw_readl(S3C2410_INTPND), S3C2410_INTPND); __raw_writel(__raw_readl(S3C2410_SRCPND), S3C2410_SRCPND); - /* call cpu specific preperation */ + /* call cpu specific preparation */ pm_cpu_prep(); -- cgit v1.2.3