From 71e93d15612c61c2e26a169567becf088e71b8ff Mon Sep 17 00:00:00 2001 From: Venki Pallipadi Date: Thu, 13 Mar 2008 17:18:19 -0700 Subject: ACPI: lockdep warning on boot, 2.6.25-rc5 This avoids the harmless WARNING by lockdep in acpi_processor_idle(). The reason for WARNING is because at the depth of idle handling code, some of the idle handlers disable interrupts, some times, while returning from the idle handler. After return, acpi_processor_idle and few other routines in the file did an unconditional local_irq_enable(). With LOCKDEP, enabling irq when it is already enabled generates the below WARNING. > > [ 0.593038] ------------[ cut here ]------------ > > [ 0.593267] WARNING: at kernel/lockdep.c:2035 trace_hardirqs_on+0xa0/0x115() > > [ 0.593596] Modules linked in: > > [ 0.593756] Pid: 0, comm: swapper Not tainted 2.6.25-rc5 #8 > > [ 0.594017] > > [ 0.594017] Call Trace: > > [ 0.594216] [] warn_on_slowpath+0x58/0x6b > > [ 0.594495] [] ? _spin_unlock_irqrestore+0x38/0x47 > > [ 0.594809] [] ? acpi_os_release_lock+0x9/0xb > > [ 0.595103] [] ? acpi_set_register+0x161/0x173 > > [ 0.595401] [] ? acpi_processor_idle+0x1de/0x546 > > [ 0.595706] [] ? default_idle+0x0/0x73 > > [ 0.595970] [] trace_hardirqs_on+0xa0/0x115 > > [ 0.596049] [] ? acpi_processor_idle+0x0/0x546 > > [ 0.596346] [] acpi_processor_idle+0x1de/0x546 > > [ 0.596642] [] ? default_idle+0x0/0x73 > > [ 0.596912] [] ? acpi_processor_idle+0x0/0x546 > > [ 0.597209] [] ? default_idle+0x0/0x73 > > [ 0.597472] [] cpu_idle+0xa7/0xd1 > > [ 0.597717] [] rest_init+0x55/0x57 > > [ 0.597957] [] start_kernel+0x29d/0x2a8 > > [ 0.598215] [] _sinittext+0x1da/0x1e1 > > [ 0.598464] > > [ 0.598546] ---[ end trace 778e504de7e3b1e3 ]--- Signed-off-by: Venkatesh Pallipadi Signed-off-by: Len Brown --- drivers/acpi/processor_idle.c | 12 +++++++++--- 1 file changed, 9 insertions(+), 3 deletions(-) diff --git a/drivers/acpi/processor_idle.c b/drivers/acpi/processor_idle.c index 6f3b217699e..e8e2d886923 100644 --- a/drivers/acpi/processor_idle.c +++ b/drivers/acpi/processor_idle.c @@ -216,8 +216,10 @@ static void acpi_safe_halt(void) * test NEED_RESCHED: */ smp_mb(); - if (!need_resched()) + if (!need_resched()) { safe_halt(); + local_irq_disable(); + } current_thread_info()->status |= TS_POLLING; } @@ -421,7 +423,9 @@ static void acpi_processor_idle(void) else acpi_safe_halt(); - local_irq_enable(); + if (irqs_disabled()) + local_irq_enable(); + return; } @@ -530,7 +534,9 @@ static void acpi_processor_idle(void) * skew otherwise. */ sleep_ticks = 0xFFFFFFFF; - local_irq_enable(); + if (irqs_disabled()) + local_irq_enable(); + break; case ACPI_STATE_C2: -- cgit v1.2.3 From b8a1bdb14940946fcf0438a6337b2a6c54294fb8 Mon Sep 17 00:00:00 2001 From: Alexey Starikovskiy Date: Mon, 17 Mar 2008 22:37:42 -0400 Subject: ACPI: battery: Don't return -EFAIL on broken packages. Acer BIOS has a bug which is exposed when a dead battery is present. The package template that is used to describe battery status is over-written with sane values when the battery is live. But when the batter is dead, a bogus reference in the template is used. In this case, Linux returns a fault, when instead it should simply return that it doesn't know the missing value. http://bugzilla.kernel.org/show_bug.cgi?id=8573 http://bugzilla.kernel.org/show_bug.cgi?id=10202 Signed-off-by: Alexey Starikovskiy Signed-off-by: Len Brown --- drivers/acpi/battery.c | 11 +++++------ 1 file changed, 5 insertions(+), 6 deletions(-) diff --git a/drivers/acpi/battery.c b/drivers/acpi/battery.c index f6215e80980..d5729d5dc19 100644 --- a/drivers/acpi/battery.c +++ b/drivers/acpi/battery.c @@ -293,13 +293,12 @@ static int extract_package(struct acpi_battery *battery, strncpy(ptr, (u8 *)&element->integer.value, sizeof(acpi_integer)); ptr[sizeof(acpi_integer)] = 0; - } else return -EFAULT; + } else + *ptr = 0; /* don't have value */ } else { - if (element->type == ACPI_TYPE_INTEGER) { - int *x = (int *)((u8 *)battery + - offsets[i].offset); - *x = element->integer.value; - } else return -EFAULT; + int *x = (int *)((u8 *)battery + offsets[i].offset); + *x = (element->type == ACPI_TYPE_INTEGER) ? + element->integer.value : -1; } } return 0; -- cgit v1.2.3 From 0ac4a3c2fbbcadc3e96e4dc47d4ae802d66e6f67 Mon Sep 17 00:00:00 2001 From: Len Brown Date: Tue, 18 Mar 2008 00:26:07 -0400 Subject: ACPI: fix ATA_ACPI build drivers/ata/libata-acpi.c fails to build drivers/built-in.o: In function `ata_acpi_associate': (.text+0x7106a): undefined reference to `register_hotplug_dock_device' When CONFIG_ATA_ACPI=y and CONFIG_ACPI_DOCK=m But if dock is selected from ata_acpi, dock will =y when ata_acpi=y, avoiding this problem. http://bugzilla.kernel.org/show_bug.cgi?id=10272 Signed-off-by: Len Brown --- drivers/ata/Kconfig | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/ata/Kconfig b/drivers/ata/Kconfig index e469647330d..25aba69b59b 100644 --- a/drivers/ata/Kconfig +++ b/drivers/ata/Kconfig @@ -30,6 +30,7 @@ config ATA_NONSTANDARD config ATA_ACPI bool depends on ACPI && PCI + select ACPI_DOCK default y help This option adds support for ATA-related ACPI objects. -- cgit v1.2.3 From 91f57fa1215952af579f304821a15cc6c656042c Mon Sep 17 00:00:00 2001 From: Len Brown Date: Tue, 18 Mar 2008 01:14:37 -0400 Subject: Revert "thermal: fix generic thermal I/F for hwmon" This reverts commit 3152fb9f11cdd2fd8688c2c5cb805e5c09b53dd9. This broke libsensors. Acked-by: Zhang Rui Acked-by: Jean Delvare Signed-off-by: Len Brown --- Documentation/thermal/sysfs-api.txt | 22 ++--- drivers/thermal/Kconfig | 1 - drivers/thermal/thermal.c | 169 ++++++------------------------------ 3 files changed, 37 insertions(+), 155 deletions(-) diff --git a/Documentation/thermal/sysfs-api.txt b/Documentation/thermal/sysfs-api.txt index d9f28be7540..ba9c2da5a8c 100644 --- a/Documentation/thermal/sysfs-api.txt +++ b/Documentation/thermal/sysfs-api.txt @@ -143,10 +143,10 @@ type Strings which represent the thermal zone type. This is given by thermal zone driver as part of registration. Eg: "ACPI thermal zone" indicates it's a ACPI thermal device RO - Required + Optional temp Current temperature as reported by thermal zone (sensor) - Unit: millidegree Celsius + Unit: degree Celsius RO Required @@ -163,7 +163,7 @@ mode One of the predefined values in [kernel, user] charge of the thermal management. trip_point_[0-*]_temp The temperature above which trip point will be fired - Unit: millidegree Celsius + Unit: degree Celsius RO Optional @@ -193,7 +193,7 @@ type String which represents the type of device eg. For memory controller device on intel_menlow platform: this should be "Memory controller" RO - Required + Optional max_state The maximum permissible cooling state of this cooling device. RO @@ -219,16 +219,16 @@ the sys I/F structure will be built like this: |thermal_zone1: |-----type: ACPI thermal zone - |-----temp: 37000 + |-----temp: 37 |-----mode: kernel - |-----trip_point_0_temp: 100000 + |-----trip_point_0_temp: 100 |-----trip_point_0_type: critical - |-----trip_point_1_temp: 80000 + |-----trip_point_1_temp: 80 |-----trip_point_1_type: passive - |-----trip_point_2_temp: 70000 - |-----trip_point_2_type: active0 - |-----trip_point_3_temp: 60000 - |-----trip_point_3_type: active1 + |-----trip_point_2_temp: 70 + |-----trip_point_2_type: active[0] + |-----trip_point_3_temp: 60 + |-----trip_point_3_type: active[1] |-----cdev0: --->/sys/class/thermal/cooling_device0 |-----cdev0_trip_point: 1 /* cdev0 can be used for passive */ |-----cdev1: --->/sys/class/thermal/cooling_device3 diff --git a/drivers/thermal/Kconfig b/drivers/thermal/Kconfig index 3ab313ed441..69f19f22487 100644 --- a/drivers/thermal/Kconfig +++ b/drivers/thermal/Kconfig @@ -4,7 +4,6 @@ menuconfig THERMAL bool "Generic Thermal sysfs driver" - select HWMON default y help Generic Thermal Sysfs driver offers a generic mechanism for diff --git a/drivers/thermal/thermal.c b/drivers/thermal/thermal.c index 41bd4c805ac..8b86e53ccf7 100644 --- a/drivers/thermal/thermal.c +++ b/drivers/thermal/thermal.c @@ -30,10 +30,8 @@ #include #include #include -#include -#include -MODULE_AUTHOR("Zhang Rui"); +MODULE_AUTHOR("Zhang Rui") MODULE_DESCRIPTION("Generic thermal management sysfs support"); MODULE_LICENSE("GPL"); @@ -58,9 +56,6 @@ static LIST_HEAD(thermal_tz_list); static LIST_HEAD(thermal_cdev_list); static DEFINE_MUTEX(thermal_list_lock); -static struct device *thermal_hwmon; -#define MAX_THERMAL_ZONES 10 - static int get_idr(struct idr *idr, struct mutex *lock, int *id) { int err; @@ -92,67 +87,7 @@ static void release_idr(struct idr *idr, struct mutex *lock, int id) mutex_unlock(lock); } -/* hwmon sys I/F*/ -static ssize_t -name_show(struct device *dev, struct device_attribute *attr, char *buf) -{ - return sprintf(buf, "thermal_sys_class\n"); -} - -static ssize_t -temp_input_show(struct device *dev, struct device_attribute *attr, char *buf) -{ - struct thermal_zone_device *tz; - struct sensor_device_attribute *sensor_attr - = to_sensor_dev_attr(attr); - - list_for_each_entry(tz, &thermal_tz_list, node) - if (tz->id == sensor_attr->index) - return tz->ops->get_temp(tz, buf); - - return -ENODEV; -} - -static ssize_t -temp_crit_show(struct device *dev, struct device_attribute *attr, - char *buf) -{ - struct thermal_zone_device *tz; - struct sensor_device_attribute *sensor_attr - = to_sensor_dev_attr(attr); - - list_for_each_entry(tz, &thermal_tz_list, node) - if (tz->id == sensor_attr->index) - return tz->ops->get_trip_temp(tz, 0, buf); - - return -ENODEV; -} - -static DEVICE_ATTR(name, 0444, name_show, NULL); -static struct sensor_device_attribute sensor_attrs[] = { - SENSOR_ATTR(temp1_input, 0444, temp_input_show, NULL, 0), - SENSOR_ATTR(temp1_crit, 0444, temp_crit_show, NULL, 0), - SENSOR_ATTR(temp2_input, 0444, temp_input_show, NULL, 1), - SENSOR_ATTR(temp2_crit, 0444, temp_crit_show, NULL, 1), - SENSOR_ATTR(temp3_input, 0444, temp_input_show, NULL, 2), - SENSOR_ATTR(temp3_crit, 0444, temp_crit_show, NULL, 2), - SENSOR_ATTR(temp4_input, 0444, temp_input_show, NULL, 3), - SENSOR_ATTR(temp4_crit, 0444, temp_crit_show, NULL, 3), - SENSOR_ATTR(temp5_input, 0444, temp_input_show, NULL, 4), - SENSOR_ATTR(temp5_crit, 0444, temp_crit_show, NULL, 4), - SENSOR_ATTR(temp6_input, 0444, temp_input_show, NULL, 5), - SENSOR_ATTR(temp6_crit, 0444, temp_crit_show, NULL, 5), - SENSOR_ATTR(temp7_input, 0444, temp_input_show, NULL, 6), - SENSOR_ATTR(temp7_crit, 0444, temp_crit_show, NULL, 6), - SENSOR_ATTR(temp8_input, 0444, temp_input_show, NULL, 7), - SENSOR_ATTR(temp8_crit, 0444, temp_crit_show, NULL, 7), - SENSOR_ATTR(temp9_input, 0444, temp_input_show, NULL, 8), - SENSOR_ATTR(temp9_crit, 0444, temp_crit_show, NULL, 8), - SENSOR_ATTR(temp10_input, 0444, temp_input_show, NULL, 9), - SENSOR_ATTR(temp10_crit, 0444, temp_crit_show, NULL, 9), -}; - -/* thermal zone sys I/F */ +/* sys I/F for thermal zone */ #define to_thermal_zone(_dev) \ container_of(_dev, struct thermal_zone_device, device) @@ -279,7 +214,7 @@ do { \ device_remove_file(_dev, &trip_point_attrs[_index * 2 + 1]); \ } while (0) -/* cooling device sys I/F */ +/* sys I/F for cooling device */ #define to_cooling_device(_dev) \ container_of(_dev, struct thermal_cooling_device, device) @@ -512,9 +447,6 @@ struct thermal_cooling_device *thermal_cooling_device_register(char *type, struct thermal_zone_device *pos; int result; - if (!type) - return ERR_PTR(-EINVAL); - if (strlen(type) >= THERMAL_NAME_LENGTH) return ERR_PTR(-EINVAL); @@ -545,9 +477,11 @@ struct thermal_cooling_device *thermal_cooling_device_register(char *type, } /* sys I/F */ - result = device_create_file(&cdev->device, &dev_attr_cdev_type); - if (result) - goto unregister; + if (type) { + result = device_create_file(&cdev->device, &dev_attr_cdev_type); + if (result) + goto unregister; + } result = device_create_file(&cdev->device, &dev_attr_max_state); if (result) @@ -613,8 +547,8 @@ void thermal_cooling_device_unregister(struct tz->ops->unbind(tz, cdev); } mutex_unlock(&thermal_list_lock); - - device_remove_file(&cdev->device, &dev_attr_cdev_type); + if (cdev->type[0]) + device_remove_file(&cdev->device, &dev_attr_cdev_type); device_remove_file(&cdev->device, &dev_attr_max_state); device_remove_file(&cdev->device, &dev_attr_cur_state); @@ -646,9 +580,6 @@ struct thermal_zone_device *thermal_zone_device_register(char *type, int result; int count; - if (!type) - return ERR_PTR(-EINVAL); - if (strlen(type) >= THERMAL_NAME_LENGTH) return ERR_PTR(-EINVAL); @@ -670,13 +601,6 @@ struct thermal_zone_device *thermal_zone_device_register(char *type, kfree(tz); return ERR_PTR(result); } - if (tz->id >= MAX_THERMAL_ZONES) { - printk(KERN_ERR PREFIX - "Too many thermal zones\n"); - release_idr(&thermal_tz_idr, &thermal_idr_lock, tz->id); - kfree(tz); - return ERR_PTR(-EINVAL); - } strcpy(tz->type, type); tz->ops = ops; @@ -691,27 +615,12 @@ struct thermal_zone_device *thermal_zone_device_register(char *type, return ERR_PTR(result); } - /* hwmon sys I/F */ - result = device_create_file(thermal_hwmon, - &sensor_attrs[tz->id * 2].dev_attr); - if (result) - goto unregister; - - if (trips > 0) { - char buf[40]; - result = tz->ops->get_trip_type(tz, 0, buf); - if (result > 0 && !strcmp(buf, "critical\n")) { - result = device_create_file(thermal_hwmon, - &sensor_attrs[tz->id * 2 + 1].dev_attr); - if (result) - goto unregister; - } - } - /* sys I/F */ - result = device_create_file(&tz->device, &dev_attr_type); - if (result) - goto unregister; + if (type) { + result = device_create_file(&tz->device, &dev_attr_type); + if (result) + goto unregister; + } result = device_create_file(&tz->device, &dev_attr_temp); if (result) @@ -778,17 +687,8 @@ void thermal_zone_device_unregister(struct thermal_zone_device *tz) tz->ops->unbind(tz, cdev); mutex_unlock(&thermal_list_lock); - device_remove_file(thermal_hwmon, - &sensor_attrs[tz->id * 2].dev_attr); - if (tz->trips > 0) { - char buf[40]; - if (tz->ops->get_trip_type(tz, 0, buf) > 0) - if (!strcmp(buf, "critical\n")) - device_remove_file(thermal_hwmon, - &sensor_attrs[tz->id * 2 + 1].dev_attr); - } - - device_remove_file(&tz->device, &dev_attr_type); + if (tz->type[0]) + device_remove_file(&tz->device, &dev_attr_type); device_remove_file(&tz->device, &dev_attr_temp); if (tz->ops->get_mode) device_remove_file(&tz->device, &dev_attr_mode); @@ -805,19 +705,6 @@ void thermal_zone_device_unregister(struct thermal_zone_device *tz) EXPORT_SYMBOL(thermal_zone_device_unregister); -static void thermal_exit(void) -{ - if (thermal_hwmon) { - device_remove_file(thermal_hwmon, &dev_attr_name); - hwmon_device_unregister(thermal_hwmon); - } - class_unregister(&thermal_class); - idr_destroy(&thermal_tz_idr); - idr_destroy(&thermal_cdev_idr); - mutex_destroy(&thermal_idr_lock); - mutex_destroy(&thermal_list_lock); -} - static int __init thermal_init(void) { int result = 0; @@ -829,21 +716,17 @@ static int __init thermal_init(void) mutex_destroy(&thermal_idr_lock); mutex_destroy(&thermal_list_lock); } - - thermal_hwmon = hwmon_device_register(NULL); - if (IS_ERR(thermal_hwmon)) { - result = PTR_ERR(thermal_hwmon); - thermal_hwmon = NULL; - printk(KERN_ERR PREFIX - "unable to register hwmon device\n"); - thermal_exit(); - return result; - } - - result = device_create_file(thermal_hwmon, &dev_attr_name); - return result; } +static void __exit thermal_exit(void) +{ + class_unregister(&thermal_class); + idr_destroy(&thermal_tz_idr); + idr_destroy(&thermal_cdev_idr); + mutex_destroy(&thermal_idr_lock); + mutex_destroy(&thermal_list_lock); +} + subsys_initcall(thermal_init); module_exit(thermal_exit); -- cgit v1.2.3 From 6d7f014e55c5227220da1f021c518487fcfd585a Mon Sep 17 00:00:00 2001 From: "Zhang, Rui" Date: Tue, 18 Mar 2008 10:40:29 +0800 Subject: thermal: re-document thermal units From: Zhang Rui (reverting the previous sysfs patch also reverted a fix to the thermal units documentation, which is restored by this commit) The generic thermal driver shows temperature in millidegree Celsius. Signed-off-by: Zhang Rui Signed-off-by: Len Brown --- Documentation/thermal/sysfs-api.txt | 22 +++++++++++----------- 1 file changed, 11 insertions(+), 11 deletions(-) diff --git a/Documentation/thermal/sysfs-api.txt b/Documentation/thermal/sysfs-api.txt index ba9c2da5a8c..d9f28be7540 100644 --- a/Documentation/thermal/sysfs-api.txt +++ b/Documentation/thermal/sysfs-api.txt @@ -143,10 +143,10 @@ type Strings which represent the thermal zone type. This is given by thermal zone driver as part of registration. Eg: "ACPI thermal zone" indicates it's a ACPI thermal device RO - Optional + Required temp Current temperature as reported by thermal zone (sensor) - Unit: degree Celsius + Unit: millidegree Celsius RO Required @@ -163,7 +163,7 @@ mode One of the predefined values in [kernel, user] charge of the thermal management. trip_point_[0-*]_temp The temperature above which trip point will be fired - Unit: degree Celsius + Unit: millidegree Celsius RO Optional @@ -193,7 +193,7 @@ type String which represents the type of device eg. For memory controller device on intel_menlow platform: this should be "Memory controller" RO - Optional + Required max_state The maximum permissible cooling state of this cooling device. RO @@ -219,16 +219,16 @@ the sys I/F structure will be built like this: |thermal_zone1: |-----type: ACPI thermal zone - |-----temp: 37 + |-----temp: 37000 |-----mode: kernel - |-----trip_point_0_temp: 100 + |-----trip_point_0_temp: 100000 |-----trip_point_0_type: critical - |-----trip_point_1_temp: 80 + |-----trip_point_1_temp: 80000 |-----trip_point_1_type: passive - |-----trip_point_2_temp: 70 - |-----trip_point_2_type: active[0] - |-----trip_point_3_temp: 60 - |-----trip_point_3_type: active[1] + |-----trip_point_2_temp: 70000 + |-----trip_point_2_type: active0 + |-----trip_point_3_temp: 60000 + |-----trip_point_3_type: active1 |-----cdev0: --->/sys/class/thermal/cooling_device0 |-----cdev0_trip_point: 1 /* cdev0 can be used for passive */ |-----cdev1: --->/sys/class/thermal/cooling_device3 -- cgit v1.2.3 From ece54e2ff45062852e4647e85b2bb5f6aee8211c Mon Sep 17 00:00:00 2001 From: Len Brown Date: Tue, 18 Mar 2008 01:22:10 -0400 Subject: thermal: delete "default y" The generic thermal I/F gets selected by ACPI_THERMAL -- its only current customer. it doesn't need to clutter other configs by default. Signed-off-by: Len Brown --- drivers/thermal/Kconfig | 1 - 1 file changed, 1 deletion(-) diff --git a/drivers/thermal/Kconfig b/drivers/thermal/Kconfig index 69f19f22487..17e71d56f31 100644 --- a/drivers/thermal/Kconfig +++ b/drivers/thermal/Kconfig @@ -4,7 +4,6 @@ menuconfig THERMAL bool "Generic Thermal sysfs driver" - default y help Generic Thermal Sysfs driver offers a generic mechanism for thermal management. Usually it's made up of one or more thermal -- cgit v1.2.3 From f0d6752c9fa51d24c86b57c76ec5b2926a716b23 Mon Sep 17 00:00:00 2001 From: Len Brown Date: Tue, 18 Mar 2008 01:43:53 -0400 Subject: Revert "ACPI: video: Ignore ACPI video devices that aren't present in hardware" This reverts commit 3fa2cdcc45a0176de15cac9dbf4ed2834ebf8932. http://bugzilla.kernel.org/show_bug.cgi?id=9995 Signed-off-by: Len Brown --- drivers/acpi/video.c | 31 +------------------------------ 1 file changed, 1 insertion(+), 30 deletions(-) diff --git a/drivers/acpi/video.c b/drivers/acpi/video.c index 1bc0c74f275..98f1d4e5598 100644 --- a/drivers/acpi/video.c +++ b/drivers/acpi/video.c @@ -807,40 +807,11 @@ static void acpi_video_bus_find_cap(struct acpi_video_bus *video) static int acpi_video_bus_check(struct acpi_video_bus *video) { acpi_status status = -ENOENT; - long device_id; - struct device *dev; - struct acpi_device *device; + if (!video) return -EINVAL; - device = video->device; - - status = - acpi_evaluate_integer(device->handle, "_ADR", NULL, &device_id); - - if (!ACPI_SUCCESS(status)) - return -ENODEV; - - /* We need to attempt to determine whether the _ADR refers to a - PCI device or not. There's no terribly good way to do this, - so the best we can hope for is to assume that there'll never - be a video device in the host bridge */ - if (device_id >= 0x10000) { - /* It looks like a PCI device. Does it exist? */ - dev = acpi_get_physical_device(device->handle); - } else { - /* It doesn't look like a PCI device. Does its parent - exist? */ - acpi_handle phandle; - if (acpi_get_parent(device->handle, &phandle)) - return -ENODEV; - dev = acpi_get_physical_device(phandle); - } - if (!dev) - return -ENODEV; - put_device(dev); - /* Since there is no HID, CID and so on for VGA driver, we have * to check well known required nodes. */ -- cgit v1.2.3 From abc5a87f4e627e058813a95b112e9f5f21668f9d Mon Sep 17 00:00:00 2001 From: Julia Lawall Date: Tue, 4 Mar 2008 15:00:13 -0800 Subject: asus_acpi: remove misleading mask led_out is boolean, so there is no functional change here, but apparently an extra mask with 1 caused some style checkers to flag this as logic bug. Signed-off-by: Julia Lawall Acked-by: Luca Tettamanti Signed-off-by: Andrew Morton Signed-off-by: Len Brown --- drivers/acpi/asus_acpi.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/acpi/asus_acpi.c b/drivers/acpi/asus_acpi.c index d25ef961415..44ad90c03c2 100644 --- a/drivers/acpi/asus_acpi.c +++ b/drivers/acpi/asus_acpi.c @@ -610,7 +610,7 @@ write_led(const char __user * buffer, unsigned long count, (led_out) ? (hotk->status | ledmask) : (hotk->status & ~ledmask); if (invert) /* invert target value */ - led_out = !led_out & 0x1; + led_out = !led_out; if (!write_acpi_int(hotk->handle, ledname, led_out, NULL)) printk(KERN_WARNING "Asus ACPI: LED (%s) write failed\n", -- cgit v1.2.3 From 77321e624b64f1e5985a20f3cd16b94c96d0dbb4 Mon Sep 17 00:00:00 2001 From: Len Brown Date: Tue, 18 Mar 2008 04:04:35 -0400 Subject: Revert "ACPI: video: Ignore devices that aren't present in hardware" This reverts commit 0119509c4fbc9adcef1472817fda295334612976. http://bugzilla.kernel.org/show_bug.cgi?id=9995 Signed-off-by: Len Brown --- drivers/acpi/video.c | 29 ----------------------------- 1 file changed, 29 deletions(-) diff --git a/drivers/acpi/video.c b/drivers/acpi/video.c index 98f1d4e5598..12fb44f1676 100644 --- a/drivers/acpi/video.c +++ b/drivers/acpi/video.c @@ -1337,37 +1337,8 @@ acpi_video_bus_write_DOS(struct file *file, static int acpi_video_bus_add_fs(struct acpi_device *device) { - long device_id; - int status; struct proc_dir_entry *entry = NULL; struct acpi_video_bus *video; - struct device *dev; - - status = - acpi_evaluate_integer(device->handle, "_ADR", NULL, &device_id); - - if (!ACPI_SUCCESS(status)) - return -ENODEV; - - /* We need to attempt to determine whether the _ADR refers to a - PCI device or not. There's no terribly good way to do this, - so the best we can hope for is to assume that there'll never - be a video device in the host bridge */ - if (device_id >= 0x10000) { - /* It looks like a PCI device. Does it exist? */ - dev = acpi_get_physical_device(device->handle); - } else { - /* It doesn't look like a PCI device. Does its parent - exist? */ - acpi_handle phandle; - if (acpi_get_parent(device->handle, &phandle)) - return -ENODEV; - dev = acpi_get_physical_device(phandle); - } - if (!dev) - return -ENODEV; - put_device(dev); - video = acpi_driver_data(device); -- cgit v1.2.3 From 9171f83488940e4ff85f1b7137773eb1f306cdef Mon Sep 17 00:00:00 2001 From: Holger Macht Date: Wed, 12 Mar 2008 01:07:27 +0100 Subject: ACPI: Set flag DOCK_UNDOCKING when triggered via sysfs begin_undock() is only called when triggered via a acpi notify handler (pressing the undock button on the dock station), but complete_undock() is always called after the eject. So if a undock is triggered through a sysfs write, the flag DOCK_UNDOCKING has to be set for the dock station, too. Otherwise this will freeze the system hard. Signed-off-by: Holger Macht Acked-by: Kristen Carlson Accardi Signed-off-by: Andrew Morton Signed-off-by: Len Brown --- drivers/acpi/dock.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/acpi/dock.c b/drivers/acpi/dock.c index 307cef65c24..fa44fb96fc3 100644 --- a/drivers/acpi/dock.c +++ b/drivers/acpi/dock.c @@ -710,6 +710,7 @@ static ssize_t write_undock(struct device *dev, struct device_attribute *attr, if (!count) return -EINVAL; + begin_undock(dock_station); ret = handle_eject_request(dock_station, ACPI_NOTIFY_EJECT_REQUEST); return ret ? ret: count; } -- cgit v1.2.3