From a1d85864d30181a71243193ed01d322dc0618dc6 Mon Sep 17 00:00:00 2001 From: Gabriel Craciunescu Date: Tue, 27 Nov 2007 21:35:52 +0100 Subject: sis5513.c: Add Packard Bell EasyNote K5305 to laptops With newer kernels HDD in my old laptop is limited to UDMA 33. With this patch I get UDMA 100 again. Signed-off-by: Gabriel Craciunescu Signed-off-by: Bartlomiej Zolnierkiewicz --- drivers/ide/pci/sis5513.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/ide/pci/sis5513.c b/drivers/ide/pci/sis5513.c index f6e2ab3dd16..d90b4291777 100644 --- a/drivers/ide/pci/sis5513.c +++ b/drivers/ide/pci/sis5513.c @@ -526,6 +526,7 @@ static const struct sis_laptop sis_laptop[] = { /* devid, subvendor, subdev */ { 0x5513, 0x1043, 0x1107 }, /* ASUS A6K */ { 0x5513, 0x1734, 0x105f }, /* FSC Amilo A1630 */ + { 0x5513, 0x1071, 0x8640 }, /* EasyNote K5305 */ /* end marker */ { 0, } }; -- cgit v1.2.3 From 89613e667f7539defb053795f18653003179cf7e Mon Sep 17 00:00:00 2001 From: Sergei Shtylyov Date: Tue, 27 Nov 2007 21:35:52 +0100 Subject: ide: don't set PIO mode on pre-EIDE drives Fix handling of the PIO modes for the pre-EIDE drives that did not support the PIO Flow Control Transfer Mode value (00001 nnn) of the Set Transfer Mode feature by skipping the actual mode programming. Signed-off-by: Sergei Shtylyov Signed-off-by: Bartlomiej Zolnierkiewicz --- drivers/ide/ide-iops.c | 7 ++++++- 1 file changed, 6 insertions(+), 1 deletion(-) diff --git a/drivers/ide/ide-iops.c b/drivers/ide/ide-iops.c index e17a9ee120e..1cdf688a542 100644 --- a/drivers/ide/ide-iops.c +++ b/drivers/ide/ide-iops.c @@ -756,7 +756,7 @@ int ide_driveid_update(ide_drive_t *drive) int ide_config_drive_speed(ide_drive_t *drive, u8 speed) { ide_hwif_t *hwif = drive->hwif; - int error; + int error = 0; u8 stat; // while (HWGROUP(drive)->busy) @@ -767,6 +767,10 @@ int ide_config_drive_speed(ide_drive_t *drive, u8 speed) hwif->dma_host_off(drive); #endif + /* Skip setting PIO flow-control modes on pre-EIDE drives */ + if ((speed & 0xf8) == XFER_PIO_0 && !(drive->id->capability & 0x08)) + goto skip; + /* * Don't use ide_wait_cmd here - it will * attempt to set_geometry and recalibrate, @@ -814,6 +818,7 @@ int ide_config_drive_speed(ide_drive_t *drive, u8 speed) drive->id->dma_mword &= ~0x0F00; drive->id->dma_1word &= ~0x0F00; + skip: #ifdef CONFIG_BLK_DEV_IDEDMA if (speed >= XFER_SW_DMA_0) hwif->dma_host_on(drive); -- cgit v1.2.3 From 8ac98ce17cf318f6ceb1eb88053917001f5ca60a Mon Sep 17 00:00:00 2001 From: Sergei Shtylyov Date: Tue, 27 Nov 2007 21:35:53 +0100 Subject: siimage: remove resetproc() method The intent behind siimage_reset() was probably to hard reset the interface and the SATA PHY but as the code writes to two reserved bits instead, it obviously has been ineffective from the start. So, just remove it. Signed-off-by: Sergei Shtylyov Cc: Alan Cox Signed-off-by: Bartlomiej Zolnierkiewicz --- drivers/ide/pci/siimage.c | 45 +-------------------------------------------- 1 file changed, 1 insertion(+), 44 deletions(-) diff --git a/drivers/ide/pci/siimage.c b/drivers/ide/pci/siimage.c index 6d99441c605..5709c252543 100644 --- a/drivers/ide/pci/siimage.c +++ b/drivers/ide/pci/siimage.c @@ -1,5 +1,5 @@ /* - * linux/drivers/ide/pci/siimage.c Version 1.18 Oct 18 2007 + * linux/drivers/ide/pci/siimage.c Version 1.19 Nov 16 2007 * * Copyright (C) 2001-2002 Andre Hedrick * Copyright (C) 2003 Red Hat @@ -459,48 +459,6 @@ static void sil_sata_pre_reset(ide_drive_t *drive) } } -/** - * siimage_reset - reset a device on an siimage controller - * @drive: drive to reset - * - * Perform a controller level reset fo the device. For - * SATA we must also check the PHY. - */ - -static void siimage_reset (ide_drive_t *drive) -{ - ide_hwif_t *hwif = HWIF(drive); - u8 reset = 0; - unsigned long addr = siimage_selreg(hwif, 0); - - if (hwif->mmio) { - reset = hwif->INB(addr); - hwif->OUTB((reset|0x03), addr); - /* FIXME:posting */ - udelay(25); - hwif->OUTB(reset, addr); - (void) hwif->INB(addr); - } else { - pci_read_config_byte(hwif->pci_dev, addr, &reset); - pci_write_config_byte(hwif->pci_dev, addr, reset|0x03); - udelay(25); - pci_write_config_byte(hwif->pci_dev, addr, reset); - pci_read_config_byte(hwif->pci_dev, addr, &reset); - } - - if (SATA_STATUS_REG) { - /* SATA_STATUS_REG is valid only when in MMIO mode */ - u32 sata_stat = readl((void __iomem *)SATA_STATUS_REG); - printk(KERN_WARNING "%s: reset phy, status=0x%08x, %s\n", - hwif->name, sata_stat, __FUNCTION__); - if (!(sata_stat)) { - printk(KERN_WARNING "%s: reset phy dead, status=0x%08x\n", - hwif->name, sata_stat); - drive->failures++; - } - } -} - /** * proc_reports_siimage - add siimage controller to proc * @dev: PCI device @@ -857,7 +815,6 @@ static void __devinit init_hwif_siimage(ide_hwif_t *hwif) { u8 sata = is_sata(hwif); - hwif->resetproc = &siimage_reset; hwif->set_pio_mode = &sil_set_pio_mode; hwif->set_dma_mode = &sil_set_dma_mode; -- cgit v1.2.3 From 8266105b15192177ac732ab8a27b315dc9291100 Mon Sep 17 00:00:00 2001 From: Jonas Stare Date: Tue, 27 Nov 2007 21:35:53 +0100 Subject: ide: skip ide_wait_not_busy() on noprobe-disks There is a problem in some hardware where the kernel will stall for 35 seconds waiting for disks that don't exist. This patch will skip waiting for the BSY-bit on IDE drives to go away if you set "hdx=noprobe" as a kernel option and the disk is not marked as 'present' (like when you set the geometry by hand). If no noprobe-option is set the code will work (more or less) as the original but if set the code will skip the ide_wait_not_busy() for that drive. Even if there would be a drive there and it is still busy afterwards it should not matter since it isn't probed for later. The code also honors the MAX_DRIVES variable instead of assuming that there will be two harddrives on the bus. Bart: minor cleanups Signed-off-by: Jonas Stare CC: Andrew Morton , Cc: Linus Torvalds Cc: Alan Cox Cc: Benjamin Herrenschmidt Signed-off-by: Bartlomiej Zolnierkiewicz --- drivers/ide/ide-probe.c | 32 +++++++++++++++++++------------- 1 file changed, 19 insertions(+), 13 deletions(-) diff --git a/drivers/ide/ide-probe.c b/drivers/ide/ide-probe.c index 56fb0b84342..ee848c70599 100644 --- a/drivers/ide/ide-probe.c +++ b/drivers/ide/ide-probe.c @@ -644,7 +644,7 @@ static void hwif_register (ide_hwif_t *hwif) static int wait_hwif_ready(ide_hwif_t *hwif) { - int rc; + int unit, rc; printk(KERN_DEBUG "Probing IDE interface %s...\n", hwif->name); @@ -661,20 +661,26 @@ static int wait_hwif_ready(ide_hwif_t *hwif) return rc; /* Now make sure both master & slave are ready */ - SELECT_DRIVE(&hwif->drives[0]); - hwif->OUTB(8, hwif->io_ports[IDE_CONTROL_OFFSET]); - mdelay(2); - rc = ide_wait_not_busy(hwif, 35000); - if (rc) - return rc; - SELECT_DRIVE(&hwif->drives[1]); - hwif->OUTB(8, hwif->io_ports[IDE_CONTROL_OFFSET]); - mdelay(2); - rc = ide_wait_not_busy(hwif, 35000); + for (unit = 0; unit < MAX_DRIVES; unit++) { + ide_drive_t *drive = &hwif->drives[unit]; + /* Ignore disks that we will not probe for later. */ + if (!drive->noprobe || drive->present) { + SELECT_DRIVE(drive); + hwif->OUTB(8, hwif->io_ports[IDE_CONTROL_OFFSET]); + mdelay(2); + rc = ide_wait_not_busy(hwif, 35000); + if (rc) + goto out; + } else + printk(KERN_DEBUG "%s: ide_wait_not_busy() skipped\n", + drive->name); + } +out: /* Exit function with master reselected (let's be sane) */ - SELECT_DRIVE(&hwif->drives[0]); - + if (unit) + SELECT_DRIVE(&hwif->drives[0]); + return rc; } -- cgit v1.2.3 From b48d08177fe635a549aaf63eef508be1de069ebf Mon Sep 17 00:00:00 2001 From: Aleksandar Radovanovic Date: Tue, 27 Nov 2007 21:35:53 +0100 Subject: aec62xx: Fix kernel oops in driver's probe function Add pci_enable_device() to aec62xx probe function before doing any I/O. Original probe function tries to read from device's PCI region 4 before calling ide_setup_pci_device(). Since the device is not enabled at this point, on machines that have no firmware PCI initialization (e.g. ASUS WL-700gE router), corresponding PCI BAR is 0 and the following inb() causes a kernel oops. Signed-off-by: Aleksandar Radovanovic Cc: Linus Torvalds , Signed-off-by: Bartlomiej Zolnierkiewicz --- drivers/ide/pci/aec62xx.c | 11 ++++++++++- 1 file changed, 10 insertions(+), 1 deletion(-) diff --git a/drivers/ide/pci/aec62xx.c b/drivers/ide/pci/aec62xx.c index 19ec421f7b9..44268504ae4 100644 --- a/drivers/ide/pci/aec62xx.c +++ b/drivers/ide/pci/aec62xx.c @@ -260,6 +260,11 @@ static int __devinit aec62xx_init_one(struct pci_dev *dev, const struct pci_devi { struct ide_port_info d; u8 idx = id->driver_data; + int err; + + err = pci_enable_device(dev); + if (err) + return err; d = aec62xx_chipsets[idx]; @@ -272,7 +277,11 @@ static int __devinit aec62xx_init_one(struct pci_dev *dev, const struct pci_devi } } - return ide_setup_pci_device(dev, &d); + err = ide_setup_pci_device(dev, &d); + if (err) + pci_disable_device(dev); + + return err; } static const struct pci_device_id aec62xx_pci_tbl[] = { -- cgit v1.2.3 From 355bd12f4aba2f6acaf5e8dd9c85e0cc7dbae965 Mon Sep 17 00:00:00 2001 From: Bartlomiej Zolnierkiewicz Date: Tue, 27 Nov 2007 21:35:54 +0100 Subject: macide/q40ide: add missing __init tag to {macide,q40ide}_init() Acked-by: Sergei Shtylyov Signed-off-by: Bartlomiej Zolnierkiewicz --- drivers/ide/legacy/macide.c | 2 +- drivers/ide/legacy/q40ide.c | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/ide/legacy/macide.c b/drivers/ide/legacy/macide.c index e87cd2f1643..5c6aa77c237 100644 --- a/drivers/ide/legacy/macide.c +++ b/drivers/ide/legacy/macide.c @@ -81,7 +81,7 @@ int macide_ack_intr(ide_hwif_t* hwif) * Probe for a Macintosh IDE interface */ -void macide_init(void) +void __init macide_init(void) { hw_regs_t hw; ide_hwif_t *hwif; diff --git a/drivers/ide/legacy/q40ide.c b/drivers/ide/legacy/q40ide.c index a73db1bd482..6ea46a6723e 100644 --- a/drivers/ide/legacy/q40ide.c +++ b/drivers/ide/legacy/q40ide.c @@ -111,7 +111,7 @@ static const char *q40_ide_names[Q40IDE_NUM_HWIFS]={ * Probe for Q40 IDE interfaces */ -void q40ide_init(void) +void __init q40ide_init(void) { int i; ide_hwif_t *hwif; -- cgit v1.2.3 From c5d252cbe9044054476498df163d99cb5a6d0ba8 Mon Sep 17 00:00:00 2001 From: Bartlomiej Zolnierkiewicz Date: Tue, 27 Nov 2007 21:35:54 +0100 Subject: ide/Kconfig: fix mpc8xx host driver dependencies Only LWMON, IVMS8, IVML24 and TQM8xxL platforms have the needed defines (IDE0_BASE_OFFSET and friends) in the platform header file. Acked-by: Sergei Shtylyov Signed-off-by: Bartlomiej Zolnierkiewicz --- drivers/ide/Kconfig | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/ide/Kconfig b/drivers/ide/Kconfig index e445fe6e4ba..080d7f5d45c 100644 --- a/drivers/ide/Kconfig +++ b/drivers/ide/Kconfig @@ -963,7 +963,7 @@ config BLK_DEV_Q40IDE config BLK_DEV_MPC8xx_IDE bool "MPC8xx IDE support" - depends on 8xx && IDE=y && BLK_DEV_IDE=y && !PPC_MERGE + depends on 8xx && (LWMON || IVMS8 || IVML24 || TQM8xxL) && IDE=y && BLK_DEV_IDE=y && !PPC_MERGE select IDE_GENERIC help This option provides support for IDE on Motorola MPC8xx Systems. -- cgit v1.2.3 From acfad6e186664fa8521662bb7992ff6508f9357b Mon Sep 17 00:00:00 2001 From: Bartlomiej Zolnierkiewicz Date: Tue, 27 Nov 2007 21:35:54 +0100 Subject: ide: add CONFIG_IDE_H8300 config option Add a separate config option for ide-8300 host driver instead of depending on CONFIG_H8300. This change is a preparation for the future changes and also allows ide-h8300 to be disabled if needed. Acked-by: Sergei Shtylyov Signed-off-by: Bartlomiej Zolnierkiewicz --- drivers/ide/Kconfig | 9 ++++++++- drivers/ide/Makefile | 2 +- 2 files changed, 9 insertions(+), 2 deletions(-) diff --git a/drivers/ide/Kconfig b/drivers/ide/Kconfig index 080d7f5d45c..ca8239a2c98 100644 --- a/drivers/ide/Kconfig +++ b/drivers/ide/Kconfig @@ -313,7 +313,6 @@ comment "IDE chipset support/bugfixes" config IDE_GENERIC tristate "generic/default IDE chipset support" - default H8300 help If unsure, say N. @@ -883,6 +882,14 @@ config BLK_DEV_IDE_BAST Say Y here if you want to support the onboard IDE channels on the Simtec BAST or the Thorcom VR1000 +config IDE_H8300 + bool "H8300 IDE support" + depends on H8300 + select IDE_GENERIC + default y + help + Enables the H8300 IDE driver. + config BLK_DEV_GAYLE bool "Amiga Gayle IDE interface support" depends on AMIGA diff --git a/drivers/ide/Makefile b/drivers/ide/Makefile index 75dc6969e0a..b181fc67205 100644 --- a/drivers/ide/Makefile +++ b/drivers/ide/Makefile @@ -39,7 +39,7 @@ ide-core-$(CONFIG_BLK_DEV_MPC8xx_IDE) += ppc/mpc8xx.o ide-core-$(CONFIG_BLK_DEV_IDE_PMAC) += ppc/pmac.o # built-in only drivers from h8300/ -ide-core-$(CONFIG_H8300) += h8300/ide-h8300.o +ide-core-$(CONFIG_IDE_H8300) += h8300/ide-h8300.o obj-$(CONFIG_BLK_DEV_IDE) += ide-core.o obj-$(CONFIG_IDE_GENERIC) += ide-generic.o -- cgit v1.2.3 From c03a9278ad96e1e7d144f5f626c6794f050c0ae7 Mon Sep 17 00:00:00 2001 From: Bartlomiej Zolnierkiewicz Date: Tue, 27 Nov 2007 21:35:55 +0100 Subject: ide: move CONFIG_IDE_ETRAX to drivers/ide/Kconfig * Move ETRAX_IDE and friends from arch/cris/arch-{v10,v32}/drivers/Kconfig to drivers/ide/Kconfig. * Don't force selecting ide-disk and ide-cd device drivers (please handle this through defconfig if necessary). * Make ETRAX_IDE depend on BROKEN for the time being (it doesn't even compile currently). Cc: Mikael Starvik Acked-by: Sergei Shtylyov Signed-off-by: Bartlomiej Zolnierkiewicz --- arch/cris/arch-v10/drivers/Kconfig | 39 -------------------------------------- arch/cris/arch-v32/drivers/Kconfig | 12 ------------ drivers/ide/Kconfig | 35 ++++++++++++++++++++++++++++++++++ 3 files changed, 35 insertions(+), 51 deletions(-) diff --git a/arch/cris/arch-v10/drivers/Kconfig b/arch/cris/arch-v10/drivers/Kconfig index faf8b4d3ca0..e3c0f292814 100644 --- a/arch/cris/arch-v10/drivers/Kconfig +++ b/arch/cris/arch-v10/drivers/Kconfig @@ -542,45 +542,6 @@ config ETRAX_RS485_DISABLE_RECEIVER loopback. Not all products are able to do this in software only. Axis 2400/2401 must disable receiver. -config ETRAX_IDE - bool "ATA/IDE support" - select IDE - select BLK_DEV_IDE - select BLK_DEV_IDEDISK - select BLK_DEV_IDECD - select BLK_DEV_IDEDMA - select IDE_GENERIC - help - Enable this to get support for ATA/IDE. - You can't use parallel ports or SCSI ports - at the same time. - - -config ETRAX_IDE_DELAY - int "Delay for drives to regain consciousness" - depends on ETRAX_IDE - default 15 - help - Number of seconds to wait for IDE drives to spin up after an IDE - reset. -choice - prompt "IDE reset pin" - depends on ETRAX_IDE - default ETRAX_IDE_PB7_RESET - -config ETRAX_IDE_PB7_RESET - bool "Port_PB_Bit_7" - help - IDE reset on pin 7 on port B - -config ETRAX_IDE_G27_RESET - bool "Port_G_Bit_27" - help - IDE reset on pin 27 on port G - -endchoice - - config ETRAX_USB_HOST bool "USB host" select USB diff --git a/arch/cris/arch-v32/drivers/Kconfig b/arch/cris/arch-v32/drivers/Kconfig index 7f72d7c9e1c..9bccb5e2a96 100644 --- a/arch/cris/arch-v32/drivers/Kconfig +++ b/arch/cris/arch-v32/drivers/Kconfig @@ -582,18 +582,6 @@ config ETRAX_PE_CHANGEABLE_BITS that a user can change the value on using ioctl's. Bit set = changeable. -config ETRAX_IDE - bool "ATA/IDE support" - depends on ETRAX_ARCH_V32 - select IDE - select BLK_DEV_IDE - select BLK_DEV_IDEDISK - select BLK_DEV_IDECD - select BLK_DEV_IDEDMA - select IDE_GENERIC - help - Enables the ETRAX IDE driver. - config ETRAX_CARDBUS bool "Cardbus support" depends on ETRAX_ARCH_V32 diff --git a/drivers/ide/Kconfig b/drivers/ide/Kconfig index ca8239a2c98..403e3ffca4e 100644 --- a/drivers/ide/Kconfig +++ b/drivers/ide/Kconfig @@ -882,6 +882,41 @@ config BLK_DEV_IDE_BAST Say Y here if you want to support the onboard IDE channels on the Simtec BAST or the Thorcom VR1000 +config ETRAX_IDE + bool "ETRAX IDE support" + depends on CRIS && BROKEN + select BLK_DEV_IDEDMA + select IDE_GENERIC + help + Enables the ETRAX IDE driver. + + You can't use parallel ports or SCSI ports at the same time. + +config ETRAX_IDE_DELAY + int "Delay for drives to regain consciousness" + depends on ETRAX_IDE && ETRAX_ARCH_V10 + default 15 + help + Number of seconds to wait for IDE drives to spin up after an IDE + reset. + +choice + prompt "IDE reset pin" + depends on ETRAX_IDE && ETRAX_ARCH_V10 + default ETRAX_IDE_PB7_RESET + +config ETRAX_IDE_PB7_RESET + bool "Port_PB_Bit_7" + help + IDE reset on pin 7 on port B + +config ETRAX_IDE_G27_RESET + bool "Port_G_Bit_27" + help + IDE reset on pin 27 on port G + +endchoice + config IDE_H8300 bool "H8300 IDE support" depends on H8300 -- cgit v1.2.3 From e816056210941e9886e447e331b7fdbe133cb5f0 Mon Sep 17 00:00:00 2001 From: Bartlomiej Zolnierkiewicz Date: Tue, 27 Nov 2007 21:35:55 +0100 Subject: ide-cris: don't override ide_register_hw() result * Don't override ide_register_hw() result and check if there is a hwif available to use. * MAX_HWIFS is user configurable nowadays so replace it by hard-coded value. * Remove the comment about ide_hwifs[]. Acked-by: Mikael Starvik Acked-by: Sergei Shtylyov Signed-off-by: Bartlomiej Zolnierkiewicz --- drivers/ide/cris/ide-cris.c | 7 ++++--- 1 file changed, 4 insertions(+), 3 deletions(-) diff --git a/drivers/ide/cris/ide-cris.c b/drivers/ide/cris/ide-cris.c index 7f5bc2ee6c7..476e0d65ed4 100644 --- a/drivers/ide/cris/ide-cris.c +++ b/drivers/ide/cris/ide-cris.c @@ -773,15 +773,16 @@ init_e100_ide (void) /* the IDE control register is at ATA address 6, with CS1 active instead of CS0 */ ide_offsets[IDE_CONTROL_OFFSET] = cris_ide_reg_addr(6, 1, 0); - /* first fill in some stuff in the ide_hwifs fields */ + for (h = 0; h < 4; h++) { + ide_hwif_t *hwif = NULL; - for(h = 0; h < MAX_HWIFS; h++) { - ide_hwif_t *hwif = &ide_hwifs[h]; ide_setup_ports(&hw, cris_ide_base_address(h), ide_offsets, 0, 0, cris_ide_ack_intr, ide_default_irq(0)); ide_register_hw(&hw, NULL, 1, &hwif); + if (hwif == NULL) + continue; hwif->mmio = 1; hwif->chipset = ide_etrax100; hwif->set_pio_mode = &cris_set_pio_mode; -- cgit v1.2.3 From aca38a5157dec0090ad800d52c138fb83674481f Mon Sep 17 00:00:00 2001 From: Joe Perches Date: Tue, 27 Nov 2007 21:35:55 +0100 Subject: drivers/ide: Add missing "space" Signed-off-by: Joe Perches Signed-off-by: Bartlomiej Zolnierkiewicz --- drivers/ide/ppc/pmac.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/ide/ppc/pmac.c b/drivers/ide/ppc/pmac.c index 5afdfef7264..7f7a5988577 100644 --- a/drivers/ide/ppc/pmac.c +++ b/drivers/ide/ppc/pmac.c @@ -1513,7 +1513,7 @@ pmac_ide_build_dmatable(ide_drive_t *drive, struct request *rq) if (pmif->broken_dma && cur_addr & (L1_CACHE_BYTES - 1)) { if (pmif->broken_dma_warn == 0) { - printk(KERN_WARNING "%s: DMA on non aligned address," + printk(KERN_WARNING "%s: DMA on non aligned address, " "switching to PIO on Ohare chipset\n", drive->name); pmif->broken_dma_warn = 1; } -- cgit v1.2.3 From 9130201003cf3a9f3afe830fe8e544018beab61b Mon Sep 17 00:00:00 2001 From: Andrew Morton Date: Tue, 27 Nov 2007 21:35:56 +0100 Subject: amd74xx: arm hack drivers/ide/pci/amd74xx.c: In function `init_hwif_amd74xx': drivers/ide/pci/amd74xx.c:387: error: implicit declaration of function `pci_get_legacy_ide_irq' Cc: Russell King Signed-off-by: Andrew Morton Signed-off-by: Bartlomiej Zolnierkiewicz --- drivers/ide/Kconfig | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/ide/Kconfig b/drivers/ide/Kconfig index 403e3ffca4e..45b22282f14 100644 --- a/drivers/ide/Kconfig +++ b/drivers/ide/Kconfig @@ -483,6 +483,7 @@ config WDC_ALI15X3 config BLK_DEV_AMD74XX tristate "AMD and nVidia IDE support" + depends on !ARM select BLK_DEV_IDEDMA_PCI help This driver adds explicit support for AMD-7xx and AMD-8111 chips -- cgit v1.2.3 From b0bc65b9aa7d9eb8af4895ed772ef7fe2c10687c Mon Sep 17 00:00:00 2001 From: Bartlomiej Zolnierkiewicz Date: Tue, 27 Nov 2007 21:35:56 +0100 Subject: ide: add TORiSAN model: CD-ROM CDR_U200 fw: 1.09 to DMA blacklist Based on the report from snowbat@gmail.com. Fixes kernel bugzilla bug #9195. Tested-by: snowbat@gmail.com Acked-by: Sergei Shtylyov Signed-off-by: Bartlomiej Zolnierkiewicz --- drivers/ide/ide-dma.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/ide/ide-dma.c b/drivers/ide/ide-dma.c index e3add70b9cd..0d795a1678c 100644 --- a/drivers/ide/ide-dma.c +++ b/drivers/ide/ide-dma.c @@ -130,6 +130,7 @@ static const struct drive_list_entry drive_blacklist [] = { { "_NEC DV5800A", NULL }, { "SAMSUNG CD-ROM SN-124", "N001" }, { "Seagate STT20000A", NULL }, + { "CD-ROM CDR_U200", "1.09" }, { NULL , NULL } }; -- cgit v1.2.3 From d151456a71e2757da4169a6be2eb68ac115b05b0 Mon Sep 17 00:00:00 2001 From: Bartlomiej Zolnierkiewicz Date: Tue, 27 Nov 2007 21:35:56 +0100 Subject: alim15x3: add Mitac 8317 and derivatives to ali_cable_override() Port of Alan's patch for pata_ali.c. Cc: Alan Cox Acked-by: Sergei Shtylyov Signed-off-by: Bartlomiej Zolnierkiewicz --- drivers/ide/pci/alim15x3.c | 5 +++++ 1 file changed, 5 insertions(+) diff --git a/drivers/ide/pci/alim15x3.c b/drivers/ide/pci/alim15x3.c index a607dd31a64..ce293936af4 100644 --- a/drivers/ide/pci/alim15x3.c +++ b/drivers/ide/pci/alim15x3.c @@ -603,6 +603,11 @@ static int ali_cable_override(struct pci_dev *pdev) pdev->subsystem_device == 0x10AF) return 1; + /* Mitac 8317 (Winbook-A) and relatives */ + if (pdev->subsystem_vendor == 0x1071 && + pdev->subsystem_device == 0x8317) + return 1; + /* Systems by DMI */ if (dmi_check_system(cable_dmi_table)) return 1; -- cgit v1.2.3 From dd0fd40d5488aadfc54a50919471469a31407322 Mon Sep 17 00:00:00 2001 From: Bartlomiej Zolnierkiewicz Date: Tue, 27 Nov 2007 21:35:56 +0100 Subject: piix: add HP compaq laptop to short cable list Port of Jeff's libata commit 54174db300ee1bac632d62e4ac37fe02e47d1f18 ("[libata] ata_piix: add HP compaq laptop to short cable list"). Cc: Jeff Garzik Acked-by: Sergei Shtylyov Signed-off-by: Bartlomiej Zolnierkiewicz --- drivers/ide/pci/piix.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/ide/pci/piix.c b/drivers/ide/pci/piix.c index 63625a0be71..27781d294ce 100644 --- a/drivers/ide/pci/piix.c +++ b/drivers/ide/pci/piix.c @@ -306,6 +306,7 @@ static const struct ich_laptop ich_laptop[] = { { 0x27DF, 0x0005, 0x0280 }, /* ICH7 on Acer 5602WLMi */ { 0x27DF, 0x1025, 0x0110 }, /* ICH7 on Acer 3682WLMi */ { 0x27DF, 0x1043, 0x1267 }, /* ICH7 on Asus W5F */ + { 0x27DF, 0x103C, 0x30A1 }, /* ICH7 on HP Compaq nc2400 */ { 0x24CA, 0x1025, 0x0061 }, /* ICH4 on Acer Aspire 2023WLMi */ /* end marker */ { 0, } -- cgit v1.2.3 From 8a82387cd235d5251890d53c57bf953d24a76831 Mon Sep 17 00:00:00 2001 From: Bartlomiej Zolnierkiewicz Date: Tue, 27 Nov 2007 21:35:56 +0100 Subject: trm290: remove bogus init_hwif_trm290() comment Acked-by: Sergei Shtylyov Signed-off-by: Bartlomiej Zolnierkiewicz --- drivers/ide/pci/trm290.c | 3 --- 1 file changed, 3 deletions(-) diff --git a/drivers/ide/pci/trm290.c b/drivers/ide/pci/trm290.c index 5011ba22e36..0895e753a35 100644 --- a/drivers/ide/pci/trm290.c +++ b/drivers/ide/pci/trm290.c @@ -240,9 +240,6 @@ static int trm290_ide_dma_test_irq (ide_drive_t *drive) return (status == 0x00ff); } -/* - * Invoked from ide-dma.c at boot time. - */ static void __devinit init_hwif_trm290(ide_hwif_t *hwif) { unsigned int cfgbase = 0; -- cgit v1.2.3 From 0546cb045ea487d8702c5ae4da6e0eab7baa17ba Mon Sep 17 00:00:00 2001 From: Bartlomiej Zolnierkiewicz Date: Tue, 27 Nov 2007 21:35:57 +0100 Subject: ide: remove bogus ide_fix_driveid() comment Acked-by: Sergei Shtylyov Signed-off-by: Bartlomiej Zolnierkiewicz --- drivers/ide/ide-iops.c | 3 --- 1 file changed, 3 deletions(-) diff --git a/drivers/ide/ide-iops.c b/drivers/ide/ide-iops.c index 1cdf688a542..56463297df7 100644 --- a/drivers/ide/ide-iops.c +++ b/drivers/ide/ide-iops.c @@ -303,9 +303,6 @@ void default_hwif_transport(ide_hwif_t *hwif) hwif->atapi_output_bytes = atapi_output_bytes; } -/* - * Beginning of Taskfile OPCODE Library and feature sets. - */ void ide_fix_driveid (struct hd_driveid *id) { #ifndef __LITTLE_ENDIAN -- cgit v1.2.3 From 498f26b45cfc2e16d15f0416a40bc01156c43e92 Mon Sep 17 00:00:00 2001 From: Bartlomiej Zolnierkiewicz Date: Tue, 27 Nov 2007 21:35:57 +0100 Subject: ali14xx: constify __initdata Acked-by: Sergei Shtylyov Signed-off-by: Bartlomiej Zolnierkiewicz --- drivers/ide/legacy/ali14xx.c | 7 ++++--- 1 file changed, 4 insertions(+), 3 deletions(-) diff --git a/drivers/ide/legacy/ali14xx.c b/drivers/ide/legacy/ali14xx.c index 10311ecc674..38c3a6d63f3 100644 --- a/drivers/ide/legacy/ali14xx.c +++ b/drivers/ide/legacy/ali14xx.c @@ -53,12 +53,13 @@ /* port addresses for auto-detection */ #define ALI_NUM_PORTS 4 -static int ports[ALI_NUM_PORTS] __initdata = {0x074, 0x0f4, 0x034, 0x0e4}; +static const int ports[ALI_NUM_PORTS] __initdata = + { 0x074, 0x0f4, 0x034, 0x0e4 }; /* register initialization data */ typedef struct { u8 reg, data; } RegInitializer; -static RegInitializer initData[] __initdata = { +static const RegInitializer initData[] __initdata = { {0x01, 0x0f}, {0x02, 0x00}, {0x03, 0x00}, {0x04, 0x00}, {0x05, 0x00}, {0x06, 0x00}, {0x07, 0x2b}, {0x0a, 0x0f}, {0x25, 0x00}, {0x26, 0x00}, {0x27, 0x00}, {0x28, 0x00}, @@ -177,7 +178,7 @@ static int __init findPort (void) * Initialize controller registers with default values. */ static int __init initRegisters (void) { - RegInitializer *p; + const RegInitializer *p; u8 t; unsigned long flags; -- cgit v1.2.3 From e97564f362a93f8c248246c19828895950341252 Mon Sep 17 00:00:00 2001 From: Peter Missel Date: Tue, 27 Nov 2007 21:35:57 +0100 Subject: ide: More TSST drives with broken cable detection Add more TSST (Toshiba/Samsung) drives to the 'broken cable detection' blacklist. Signed-off-by: Peter Missel (peter.missel@onlinehome.de) Cc: Alan Cox Signed-off-by: Bartlomiej Zolnierkiewicz --- drivers/ide/ide-iops.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/drivers/ide/ide-iops.c b/drivers/ide/ide-iops.c index 56463297df7..5c3256180ae 100644 --- a/drivers/ide/ide-iops.c +++ b/drivers/ide/ide-iops.c @@ -589,6 +589,9 @@ EXPORT_SYMBOL_GPL(ide_in_drive_list); static const struct drive_list_entry ivb_list[] = { { "QUANTUM FIREBALLlct10 05" , "A03.0900" }, { "TSSTcorp CDDVDW SH-S202J" , "SB00" }, + { "TSSTcorp CDDVDW SH-S202J" , "SB01" }, + { "TSSTcorp CDDVDW SH-S202N" , "SB00" }, + { "TSSTcorp CDDVDW SH-S202N" , "SB01" }, { NULL , NULL } }; -- cgit v1.2.3 From 6413f08666830afec21e41e50c28a2c5105ede69 Mon Sep 17 00:00:00 2001 From: Denis Cheng Date: Tue, 27 Nov 2007 21:35:58 +0100 Subject: ide-scsi: use print_hex_dump from these utilities implemented in lib/hexdump.c are more handy, please use this. Bart: - s/KERN_DEBUG/KERN_CONT/ as pointed out by Randy - s/DUMP_PREFIX_OFFSET/DUMP_PREFIX_NONE/ - don't include ASCII dump - respect 80-columns limit Signed-off-by: Denis Cheng Cc: Randy Dunlap Signed-off-by: Andrew Morton Signed-off-by: Bartlomiej Zolnierkiewicz --- drivers/scsi/ide-scsi.c | 22 ++++++++-------------- 1 file changed, 8 insertions(+), 14 deletions(-) diff --git a/drivers/scsi/ide-scsi.c b/drivers/scsi/ide-scsi.c index 8d0244c2e7d..7a835a35f21 100644 --- a/drivers/scsi/ide-scsi.c +++ b/drivers/scsi/ide-scsi.c @@ -242,16 +242,6 @@ static void idescsi_output_buffers (ide_drive_t *drive, idescsi_pc_t *pc, unsign } } -static void hexdump(u8 *x, int len) -{ - int i; - - printk("[ "); - for (i = 0; i < len; i++) - printk("%x ", x[i]); - printk("]\n"); -} - static int idescsi_check_condition(ide_drive_t *drive, struct request *failed_command) { idescsi_scsi_t *scsi = drive_to_idescsi(drive); @@ -282,7 +272,8 @@ static int idescsi_check_condition(ide_drive_t *drive, struct request *failed_co pc->scsi_cmd = ((idescsi_pc_t *) failed_command->special)->scsi_cmd; if (test_bit(IDESCSI_LOG_CMD, &scsi->log)) { printk ("ide-scsi: %s: queue cmd = ", drive->name); - hexdump(pc->c, 6); + print_hex_dump(KERN_CONT, "", DUMP_PREFIX_NONE, 16, 1, pc->c, + 6, 0); } rq->rq_disk = scsi->disk; return ide_do_drive_cmd(drive, rq, ide_preempt); @@ -337,7 +328,8 @@ static int idescsi_end_request (ide_drive_t *drive, int uptodate, int nrsecs) idescsi_pc_t *opc = (idescsi_pc_t *) rq->buffer; if (log) { printk ("ide-scsi: %s: wrap up check %lu, rst = ", drive->name, opc->scsi_cmd->serial_number); - hexdump(pc->buffer,16); + print_hex_dump(KERN_CONT, "", DUMP_PREFIX_NONE, 16, 1, + pc->buffer, 16, 0); } memcpy((void *) opc->scsi_cmd->sense_buffer, pc->buffer, SCSI_SENSE_BUFFERSIZE); kfree(pc->buffer); @@ -816,10 +808,12 @@ static int idescsi_queue (struct scsi_cmnd *cmd, if (test_bit(IDESCSI_LOG_CMD, &scsi->log)) { printk ("ide-scsi: %s: que %lu, cmd = ", drive->name, cmd->serial_number); - hexdump(cmd->cmnd, cmd->cmd_len); + print_hex_dump(KERN_CONT, "", DUMP_PREFIX_NONE, 16, 1, + cmd->cmnd, cmd->cmd_len, 0); if (memcmp(pc->c, cmd->cmnd, cmd->cmd_len)) { printk ("ide-scsi: %s: que %lu, tsl = ", drive->name, cmd->serial_number); - hexdump(pc->c, 12); + print_hex_dump(KERN_CONT, "", DUMP_PREFIX_NONE, 16, 1, + pc->c, 12, 0); } } -- cgit v1.2.3