From 7d0771970c51e736758525dd71fb82dd036b823a Mon Sep 17 00:00:00 2001 From: David Brownell Date: Wed, 17 Jun 2009 16:26:03 -0700 Subject: spi: move common spi_setup() functionality into core Start moving some spi_setup() functionality into the SPI core from the various spi_master controller drivers: - Make that function stop being an inline; - Move two common idioms from drivers into that new function: * Default bits_per_word to 8 if that field isn't set * Issue a standardized dev_dbg() message This is a net minor source code shrink, and supports enhancments found in some follow-up patches. Signed-off-by: David Brownell Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/spi/atmel_spi.c | 2 -- drivers/spi/au1550_spi.c | 2 -- drivers/spi/omap2_mcspi.c | 4 +--- drivers/spi/omap_uwire.c | 2 -- drivers/spi/orion_spi.c | 3 --- drivers/spi/pxa2xx_spi.c | 11 ++-------- drivers/spi/spi.c | 55 ++++++++++++++++++++++++++++++++++++++++++++++- drivers/spi/spi_bfin5xx.c | 4 ---- drivers/spi/spi_bitbang.c | 7 +----- drivers/spi/spi_imx.c | 5 +---- drivers/spi/spi_mpc83xx.c | 6 ------ drivers/spi/spi_s3c24xx.c | 7 ------ drivers/spi/spi_txx9.c | 2 +- drivers/spi/xilinx_spi.c | 6 ------ include/linux/spi/spi.h | 25 +-------------------- 15 files changed, 61 insertions(+), 80 deletions(-) diff --git a/drivers/spi/atmel_spi.c b/drivers/spi/atmel_spi.c index 12e443cc4ac..9f9ff3af72d 100644 --- a/drivers/spi/atmel_spi.c +++ b/drivers/spi/atmel_spi.c @@ -555,8 +555,6 @@ static int atmel_spi_setup(struct spi_device *spi) return -EINVAL; } - if (bits == 0) - bits = 8; if (bits < 8 || bits > 16) { dev_dbg(&spi->dev, "setup: invalid bits_per_word %u (8 to 16)\n", diff --git a/drivers/spi/au1550_spi.c b/drivers/spi/au1550_spi.c index b02f25c702f..6a407e60f05 100644 --- a/drivers/spi/au1550_spi.c +++ b/drivers/spi/au1550_spi.c @@ -291,8 +291,6 @@ static int au1550_spi_setup(struct spi_device *spi) { struct au1550_spi *hw = spi_master_get_devdata(spi->master); - if (spi->bits_per_word == 0) - spi->bits_per_word = 8; if (spi->bits_per_word < 4 || spi->bits_per_word > 24) { dev_err(&spi->dev, "setup: invalid bits_per_word=%d\n", spi->bits_per_word); diff --git a/drivers/spi/omap2_mcspi.c b/drivers/spi/omap2_mcspi.c index d6d0c5d241c..b4f3b753d0f 100644 --- a/drivers/spi/omap2_mcspi.c +++ b/drivers/spi/omap2_mcspi.c @@ -619,9 +619,7 @@ static int omap2_mcspi_setup(struct spi_device *spi) return -EINVAL; } - if (spi->bits_per_word == 0) - spi->bits_per_word = 8; - else if (spi->bits_per_word < 4 || spi->bits_per_word > 32) { + if (spi->bits_per_word < 4 || spi->bits_per_word > 32) { dev_dbg(&spi->dev, "setup: unsupported %d bit words\n", spi->bits_per_word); return -EINVAL; diff --git a/drivers/spi/omap_uwire.c b/drivers/spi/omap_uwire.c index fe8b9ac0cce..747d29be45d 100644 --- a/drivers/spi/omap_uwire.c +++ b/drivers/spi/omap_uwire.c @@ -339,8 +339,6 @@ static int uwire_setup_transfer(struct spi_device *spi, struct spi_transfer *t) bits = spi->bits_per_word; if (t != NULL && t->bits_per_word) bits = t->bits_per_word; - if (!bits) - bits = 8; if (bits > 16) { pr_debug("%s: wordsize %d?\n", dev_name(&spi->dev), bits); diff --git a/drivers/spi/orion_spi.c b/drivers/spi/orion_spi.c index c8b0babdc2a..6d5e33bb4b4 100644 --- a/drivers/spi/orion_spi.c +++ b/drivers/spi/orion_spi.c @@ -369,9 +369,6 @@ static int orion_spi_setup(struct spi_device *spi) orion_spi_setbits(orion_spi, ORION_SPI_IF_CONFIG_REG, (1 << 14)); - if (spi->bits_per_word == 0) - spi->bits_per_word = 8; - if ((spi->max_speed_hz == 0) || (spi->max_speed_hz > orion_spi->max_speed)) spi->max_speed_hz = orion_spi->max_speed; diff --git a/drivers/spi/pxa2xx_spi.c b/drivers/spi/pxa2xx_spi.c index 3f3c08c6ba4..c7365e0b22d 100644 --- a/drivers/spi/pxa2xx_spi.c +++ b/drivers/spi/pxa2xx_spi.c @@ -1236,9 +1236,6 @@ static int setup(struct spi_device *spi) uint tx_thres = TX_THRESH_DFLT; uint rx_thres = RX_THRESH_DFLT; - if (!spi->bits_per_word) - spi->bits_per_word = 8; - if (drv_data->ssp_type != PXA25x_SSP && (spi->bits_per_word < 4 || spi->bits_per_word > 32)) { dev_err(&spi->dev, "failed setup: ssp_type=%d, bits/wrd=%d " @@ -1328,18 +1325,14 @@ static int setup(struct spi_device *spi) /* NOTE: PXA25x_SSP _could_ use external clocking ... */ if (drv_data->ssp_type != PXA25x_SSP) - dev_dbg(&spi->dev, "%d bits/word, %ld Hz, mode %d, %s\n", - spi->bits_per_word, + dev_dbg(&spi->dev, "%ld Hz actual, %s\n", clk_get_rate(ssp->clk) / (1 + ((chip->cr0 & SSCR0_SCR) >> 8)), - spi->mode & 0x3, chip->enable_dma ? "DMA" : "PIO"); else - dev_dbg(&spi->dev, "%d bits/word, %ld Hz, mode %d, %s\n", - spi->bits_per_word, + dev_dbg(&spi->dev, "%ld Hz actual, %s\n", clk_get_rate(ssp->clk) / 2 / (1 + ((chip->cr0 & SSCR0_SCR) >> 8)), - spi->mode & 0x3, chip->enable_dma ? "DMA" : "PIO"); if (spi->bits_per_word <= 8) { diff --git a/drivers/spi/spi.c b/drivers/spi/spi.c index 8eba98c8ed1..0276bc37e25 100644 --- a/drivers/spi/spi.c +++ b/drivers/spi/spi.c @@ -265,7 +265,7 @@ int spi_add_device(struct spi_device *spi) * normally rely on the device being setup. Devices * using SPI_CS_HIGH can't coexist well otherwise... */ - status = spi->master->setup(spi); + status = spi_setup(spi); if (status < 0) { dev_err(dev, "can't %s %s, status %d\n", "setup", dev_name(&spi->dev), status); @@ -583,6 +583,59 @@ EXPORT_SYMBOL_GPL(spi_busnum_to_master); /*-------------------------------------------------------------------------*/ +/* Core methods for SPI master protocol drivers. Some of the + * other core methods are currently defined as inline functions. + */ + +/** + * spi_setup - setup SPI mode and clock rate + * @spi: the device whose settings are being modified + * Context: can sleep, and no requests are queued to the device + * + * SPI protocol drivers may need to update the transfer mode if the + * device doesn't work with its default. They may likewise need + * to update clock rates or word sizes from initial values. This function + * changes those settings, and must be called from a context that can sleep. + * Except for SPI_CS_HIGH, which takes effect immediately, the changes take + * effect the next time the device is selected and data is transferred to + * or from it. When this function returns, the spi device is deselected. + * + * Note that this call will fail if the protocol driver specifies an option + * that the underlying controller or its driver does not support. For + * example, not all hardware supports wire transfers using nine bit words, + * LSB-first wire encoding, or active-high chipselects. + */ +int spi_setup(struct spi_device *spi) +{ + int status; + + if (!spi->bits_per_word) + spi->bits_per_word = 8; + + status = spi->master->setup(spi); + + dev_dbg(&spi->dev, "setup mode %d, %s%s%s%s" + "%u bits/w, %u Hz max --> %d\n", + (int) (spi->mode & (SPI_CPOL | SPI_CPHA)), + (spi->mode & SPI_CS_HIGH) ? "cs_high, " : "", + (spi->mode & SPI_LSB_FIRST) ? "lsb, " : "", + (spi->mode & SPI_3WIRE) ? "3wire, " : "", + (spi->mode & SPI_LOOP) ? "loopback, " : "", + spi->bits_per_word, spi->max_speed_hz, + status); + + return status; +} +EXPORT_SYMBOL_GPL(spi_setup); + + +/*-------------------------------------------------------------------------*/ + +/* Utility methods for SPI master protocol drivers, layered on + * top of the core. Some other utility methods are defined as + * inline functions. + */ + static void spi_complete(void *arg) { complete(arg); diff --git a/drivers/spi/spi_bfin5xx.c b/drivers/spi/spi_bfin5xx.c index 2e5fd097733..d54058a903b 100644 --- a/drivers/spi/spi_bfin5xx.c +++ b/drivers/spi/spi_bfin5xx.c @@ -1016,10 +1016,6 @@ static int bfin_spi_setup(struct spi_device *spi) return -EINVAL; } - /* Zero (the default) here means 8 bits */ - if (!spi->bits_per_word) - spi->bits_per_word = 8; - if (spi->bits_per_word != 8 && spi->bits_per_word != 16) return -EINVAL; diff --git a/drivers/spi/spi_bitbang.c b/drivers/spi/spi_bitbang.c index 85e61f45121..855b0b06e62 100644 --- a/drivers/spi/spi_bitbang.c +++ b/drivers/spi/spi_bitbang.c @@ -201,9 +201,6 @@ int spi_bitbang_setup(struct spi_device *spi) spi->controller_state = cs; } - if (!spi->bits_per_word) - spi->bits_per_word = 8; - /* per-word shift register access, in hardware or bitbanging */ cs->txrx_word = bitbang->txrx_word[spi->mode & (SPI_CPOL|SPI_CPHA)]; if (!cs->txrx_word) @@ -213,9 +210,7 @@ int spi_bitbang_setup(struct spi_device *spi) if (retval < 0) return retval; - dev_dbg(&spi->dev, "%s, mode %d, %u bits/w, %u nsec/bit\n", - __func__, spi->mode & (SPI_CPOL | SPI_CPHA), - spi->bits_per_word, 2 * cs->nsecs); + dev_dbg(&spi->dev, "%s, %u nsec/bit\n", __func__, 2 * cs->nsecs); /* NOTE we _need_ to call chipselect() early, ideally with adapter * setup, unless the hardware defaults cooperate to avoid confusion diff --git a/drivers/spi/spi_imx.c b/drivers/spi/spi_imx.c index 0671aeef579..26d5ef06dbd 100644 --- a/drivers/spi/spi_imx.c +++ b/drivers/spi/spi_imx.c @@ -1286,10 +1286,7 @@ static int setup(struct spi_device *spi) /* SPI word width */ tmp = spi->bits_per_word; - if (tmp == 0) { - tmp = 8; - spi->bits_per_word = 8; - } else if (tmp > 16) { + if (tmp > 16) { status = -EINVAL; dev_err(&spi->dev, "setup - " diff --git a/drivers/spi/spi_mpc83xx.c b/drivers/spi/spi_mpc83xx.c index a32ccb44065..0926a3e293e 100644 --- a/drivers/spi/spi_mpc83xx.c +++ b/drivers/spi/spi_mpc83xx.c @@ -447,9 +447,6 @@ static int mpc83xx_spi_setup(struct spi_device *spi) } mpc83xx_spi = spi_master_get_devdata(spi->master); - if (!spi->bits_per_word) - spi->bits_per_word = 8; - hw_mode = cs->hw_mode; /* Save orginal settings */ cs->hw_mode = mpc83xx_spi_read_reg(&mpc83xx_spi->base->mode); /* mask out bits we are going to set */ @@ -471,9 +468,6 @@ static int mpc83xx_spi_setup(struct spi_device *spi) return retval; } - dev_dbg(&spi->dev, "%s, mode %d, %u bits/w, %u Hz\n", - __func__, spi->mode & (SPI_CPOL | SPI_CPHA), - spi->bits_per_word, spi->max_speed_hz); #if 0 /* Don't think this is needed */ /* NOTE we _need_ to call chipselect() early, ideally with adapter * setup, unless the hardware defaults cooperate to avoid confusion diff --git a/drivers/spi/spi_s3c24xx.c b/drivers/spi/spi_s3c24xx.c index b3ebc1d0f85..18a4c7f5438 100644 --- a/drivers/spi/spi_s3c24xx.c +++ b/drivers/spi/spi_s3c24xx.c @@ -153,9 +153,6 @@ static int s3c24xx_spi_setup(struct spi_device *spi) { int ret; - if (!spi->bits_per_word) - spi->bits_per_word = 8; - if (spi->mode & ~MODEBITS) { dev_dbg(&spi->dev, "setup: unsupported mode bits %x\n", spi->mode & ~MODEBITS); @@ -168,10 +165,6 @@ static int s3c24xx_spi_setup(struct spi_device *spi) return ret; } - dev_dbg(&spi->dev, "%s: mode %d, %u bpw, %d hz\n", - __func__, spi->mode, spi->bits_per_word, - spi->max_speed_hz); - return 0; } diff --git a/drivers/spi/spi_txx9.c b/drivers/spi/spi_txx9.c index 29cbb065618..8e36b2153d9 100644 --- a/drivers/spi/spi_txx9.c +++ b/drivers/spi/spi_txx9.c @@ -126,7 +126,7 @@ static int txx9spi_setup(struct spi_device *spi) || spi->max_speed_hz < c->min_speed_hz) return -EINVAL; - bits_per_word = spi->bits_per_word ? : 8; + bits_per_word = spi->bits_per_word; if (bits_per_word != 8 && bits_per_word != 16) return -EINVAL; diff --git a/drivers/spi/xilinx_spi.c b/drivers/spi/xilinx_spi.c index 494d3f756e2..2d7e6b81fb4 100644 --- a/drivers/spi/xilinx_spi.c +++ b/drivers/spi/xilinx_spi.c @@ -170,9 +170,6 @@ static int xilinx_spi_setup(struct spi_device *spi) xspi = spi_master_get_devdata(spi->master); bitbang = &xspi->bitbang; - if (!spi->bits_per_word) - spi->bits_per_word = 8; - if (spi->mode & ~MODEBITS) { dev_err(&spi->dev, "%s, unsupported mode bits %x\n", __func__, spi->mode & ~MODEBITS); @@ -183,9 +180,6 @@ static int xilinx_spi_setup(struct spi_device *spi) if (retval < 0) return retval; - dev_dbg(&spi->dev, "%s, mode %d, %u bits/w, %u nsec/bit\n", - __func__, spi->mode & MODEBITS, spi->bits_per_word, 0); - return 0; } diff --git a/include/linux/spi/spi.h b/include/linux/spi/spi.h index a0faa18f7b1..0db5d64fc5e 100644 --- a/include/linux/spi/spi.h +++ b/include/linux/spi/spi.h @@ -523,30 +523,7 @@ static inline void spi_message_free(struct spi_message *m) kfree(m); } -/** - * spi_setup - setup SPI mode and clock rate - * @spi: the device whose settings are being modified - * Context: can sleep, and no requests are queued to the device - * - * SPI protocol drivers may need to update the transfer mode if the - * device doesn't work with its default. They may likewise need - * to update clock rates or word sizes from initial values. This function - * changes those settings, and must be called from a context that can sleep. - * Except for SPI_CS_HIGH, which takes effect immediately, the changes take - * effect the next time the device is selected and data is transferred to - * or from it. When this function returns, the spi device is deselected. - * - * Note that this call will fail if the protocol driver specifies an option - * that the underlying controller or its driver does not support. For - * example, not all hardware supports wire transfers using nine bit words, - * LSB-first wire encoding, or active-high chipselects. - */ -static inline int -spi_setup(struct spi_device *spi) -{ - return spi->master->setup(spi); -} - +extern int spi_setup(struct spi_device *spi); /** * spi_async - asynchronous SPI transfer -- cgit v1.2.3