From 33f1d7ecc6cffff3c618a02295de969ebbacd95d Mon Sep 17 00:00:00 2001 From: "Rafael J. Wysocki" Date: Tue, 6 Jan 2009 21:14:04 +0100 Subject: PM: Fix freezer compilation if PM_SLEEP is unset Freezer fails to compile if with the following configuration settings: CONFIG_CGROUPS=y CONFIG_CGROUP_FREEZER=y CONFIG_MODULES=y CONFIG_FREEZER=y CONFIG_PM=y CONFIG_PM_SLEEP=n Fix this by making process.o compilation depend on CONFIG_FREEZER. Reported-by: Cheng Renquan Signed-off-by: Rafael J. Wysocki Acked-by: Pavel Machek Signed-off-by: Len Brown --- kernel/power/Makefile | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/kernel/power/Makefile b/kernel/power/Makefile index 597823b5b70..d7a10167a25 100644 --- a/kernel/power/Makefile +++ b/kernel/power/Makefile @@ -4,7 +4,8 @@ EXTRA_CFLAGS += -DDEBUG endif obj-y := main.o -obj-$(CONFIG_PM_SLEEP) += process.o console.o +obj-$(CONFIG_PM_SLEEP) += console.o +obj-$(CONFIG_FREEZER) += process.o obj-$(CONFIG_HIBERNATION) += swsusp.o disk.o snapshot.o swap.o user.o obj-$(CONFIG_MAGIC_SYSRQ) += poweroff.o -- cgit v1.2.3 From 5a4ccaf37ffece09ef33f1cfec67efa8ee56f967 Mon Sep 17 00:00:00 2001 From: Masami Hiramatsu Date: Tue, 6 Jan 2009 21:15:32 +0100 Subject: kprobes: check CONFIG_FREEZER instead of CONFIG_PM Check CONFIG_FREEZER instead of CONFIG_PM because kprobe booster depends on freeze_processes() and thaw_processes() when CONFIG_PREEMPT=y. This fixes a linkage error which occurs when CONFIG_PREEMPT=y, CONFIG_PM=y and CONFIG_FREEZER=n. Reported-by: Cheng Renquan Signed-off-by: Masami Hiramatsu Signed-off-by: Rafael J. Wysocki Acked-by: Ingo Molnar Signed-off-by: Len Brown --- arch/ia64/kernel/kprobes.c | 2 +- arch/x86/kernel/kprobes.c | 2 +- kernel/kprobes.c | 2 +- 3 files changed, 3 insertions(+), 3 deletions(-) diff --git a/arch/ia64/kernel/kprobes.c b/arch/ia64/kernel/kprobes.c index f90be51b112..9adac441ac9 100644 --- a/arch/ia64/kernel/kprobes.c +++ b/arch/ia64/kernel/kprobes.c @@ -870,7 +870,7 @@ static int __kprobes pre_kprobes_handler(struct die_args *args) return 1; ss_probe: -#if !defined(CONFIG_PREEMPT) || defined(CONFIG_PM) +#if !defined(CONFIG_PREEMPT) || defined(CONFIG_FREEZER) if (p->ainsn.inst_flag == INST_FLAG_BOOSTABLE && !p->post_handler) { /* Boost up -- we can execute copied instructions directly */ ia64_psr(regs)->ri = p->ainsn.slot; diff --git a/arch/x86/kernel/kprobes.c b/arch/x86/kernel/kprobes.c index 884d985b8b8..e948b28a5a9 100644 --- a/arch/x86/kernel/kprobes.c +++ b/arch/x86/kernel/kprobes.c @@ -446,7 +446,7 @@ void __kprobes arch_prepare_kretprobe(struct kretprobe_instance *ri, static void __kprobes setup_singlestep(struct kprobe *p, struct pt_regs *regs, struct kprobe_ctlblk *kcb) { -#if !defined(CONFIG_PREEMPT) || defined(CONFIG_PM) +#if !defined(CONFIG_PREEMPT) || defined(CONFIG_FREEZER) if (p->ainsn.boostable == 1 && !p->post_handler) { /* Boost up -- we can execute copied instructions directly */ reset_current_kprobe(); diff --git a/kernel/kprobes.c b/kernel/kprobes.c index 1b9cbdc0127..7ba8cd9845c 100644 --- a/kernel/kprobes.c +++ b/kernel/kprobes.c @@ -123,7 +123,7 @@ static int collect_garbage_slots(void); static int __kprobes check_safety(void) { int ret = 0; -#if defined(CONFIG_PREEMPT) && defined(CONFIG_PM) +#if defined(CONFIG_PREEMPT) && defined(CONFIG_FREEZER) ret = freeze_processes(); if (ret == 0) { struct task_struct *p, *q; -- cgit v1.2.3 From c3407710b76610962a5ebb244172631ef9eeb51a Mon Sep 17 00:00:00 2001 From: David Brownell Date: Fri, 9 Jan 2009 12:17:08 -0800 Subject: ACPI: fix ACPI_FADT_S4_RTC_WAKE comment Make the comment for ACPI_FADT_S4_RTC_WAKE match the ACPI spec; that bit has nothing to do with status bits. Signed-off-by: David Brownell Signed-off-by: Andrew Morton Signed-off-by: Len Brown --- include/acpi/actbl.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/include/acpi/actbl.h b/include/acpi/actbl.h index 813e4b6c2c0..bf8d4cfd8cf 100644 --- a/include/acpi/actbl.h +++ b/include/acpi/actbl.h @@ -245,7 +245,7 @@ struct acpi_table_fadt { #define ACPI_FADT_POWER_BUTTON (1<<4) /* 04: Power button is handled as a generic feature */ #define ACPI_FADT_SLEEP_BUTTON (1<<5) /* 05: Sleep button is handled as a generic feature, or not present */ #define ACPI_FADT_FIXED_RTC (1<<6) /* 06: RTC wakeup stat not in fixed register space */ -#define ACPI_FADT_S4_RTC_WAKE (1<<7) /* 07: RTC wakeup stat not possible from S4 */ +#define ACPI_FADT_S4_RTC_WAKE (1<<7) /* 07: RTC wakeup possible from S4 */ #define ACPI_FADT_32BIT_TIMER (1<<8) /* 08: tmr_val is 32 bits 0=24-bits */ #define ACPI_FADT_DOCKING_SUPPORTED (1<<9) /* 09: Docking supported */ #define ACPI_FADT_RESET_REGISTER (1<<10) /* 10: System reset via the FADT RESET_REG supported */ -- cgit v1.2.3 From 3af9bfcb433c110839e4c815a9928377f66bbd0e Mon Sep 17 00:00:00 2001 From: Jonathan McDowell Date: Wed, 3 Dec 2008 20:31:11 +0000 Subject: eeepc-laptop: enable Bluetooth ACPI details Although rfkill support for the EEE bluetooth device has been added to 2.6.28-rc the appropriate ACPI accessor definitions were not added, so the support was non functional. The patch below adds the get and set accessors and has been verified to work on an EEE 901. Signed-off-by: Jonathan McDowell Acked-by: Matthew Garrett Acked-by: Corentin Chary Signed-off-by: Len Brown --- drivers/platform/x86/eeepc-laptop.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/platform/x86/eeepc-laptop.c b/drivers/platform/x86/eeepc-laptop.c index 02fe2b8b893..9d93cb971e5 100644 --- a/drivers/platform/x86/eeepc-laptop.c +++ b/drivers/platform/x86/eeepc-laptop.c @@ -90,7 +90,7 @@ enum { }; static const char *cm_getv[] = { - "WLDG", NULL, NULL, NULL, + "WLDG", "BTHG", NULL, NULL, "CAMG", NULL, NULL, NULL, NULL, "PBLG", NULL, NULL, "CFVG", NULL, NULL, NULL, @@ -99,7 +99,7 @@ static const char *cm_getv[] = { }; static const char *cm_setv[] = { - "WLDS", NULL, NULL, NULL, + "WLDS", "BTHS", NULL, NULL, "CAMS", NULL, NULL, NULL, "SDSP", "PBLS", "HDPS", NULL, "CFVS", NULL, NULL, NULL, -- cgit v1.2.3 From cad73120ab0dfd484682229346de8c16073577e1 Mon Sep 17 00:00:00 2001 From: Len Brown Date: Fri, 9 Jan 2009 17:23:38 -0500 Subject: dell-laptop: move to drivers/platform/x86/ from drivers/misc/ Signed-off-by: Len Brown --- drivers/misc/Makefile | 1 - drivers/misc/dell-laptop.c | 436 ------------------------------------- drivers/platform/x86/Kconfig | 12 + drivers/platform/x86/Makefile | 1 + drivers/platform/x86/dell-laptop.c | 436 +++++++++++++++++++++++++++++++++++++ 5 files changed, 449 insertions(+), 437 deletions(-) delete mode 100644 drivers/misc/dell-laptop.c create mode 100644 drivers/platform/x86/dell-laptop.c diff --git a/drivers/misc/Makefile b/drivers/misc/Makefile index 9cf8ae6e4b3..d5749a7bc77 100644 --- a/drivers/misc/Makefile +++ b/drivers/misc/Makefile @@ -10,7 +10,6 @@ obj-$(CONFIG_ATMEL_TCLIB) += atmel_tclib.o obj-$(CONFIG_ICS932S401) += ics932s401.o obj-$(CONFIG_LKDTM) += lkdtm.o obj-$(CONFIG_TIFM_CORE) += tifm_core.o -obj-$(CONFIG_DELL_LAPTOP) += dell-laptop.o obj-$(CONFIG_TIFM_7XX1) += tifm_7xx1.o obj-$(CONFIG_PHANTOM) += phantom.o obj-$(CONFIG_SGI_IOC4) += ioc4.o diff --git a/drivers/misc/dell-laptop.c b/drivers/misc/dell-laptop.c deleted file mode 100644 index 4d33a2068b7..00000000000 --- a/drivers/misc/dell-laptop.c +++ /dev/null @@ -1,436 +0,0 @@ -/* - * Driver for Dell laptop extras - * - * Copyright (c) Red Hat - * - * Based on documentation in the libsmbios package, Copyright (C) 2005 Dell - * Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include "../firmware/dcdbas.h" - -#define BRIGHTNESS_TOKEN 0x7d - -/* This structure will be modified by the firmware when we enter - * system management mode, hence the volatiles */ - -struct calling_interface_buffer { - u16 class; - u16 select; - volatile u32 input[4]; - volatile u32 output[4]; -} __packed; - -struct calling_interface_token { - u16 tokenID; - u16 location; - union { - u16 value; - u16 stringlength; - }; -}; - -struct calling_interface_structure { - struct dmi_header header; - u16 cmdIOAddress; - u8 cmdIOCode; - u32 supportedCmds; - struct calling_interface_token tokens[]; -} __packed; - -static int da_command_address; -static int da_command_code; -static int da_num_tokens; -static struct calling_interface_token *da_tokens; - -static struct backlight_device *dell_backlight_device; -static struct rfkill *wifi_rfkill; -static struct rfkill *bluetooth_rfkill; -static struct rfkill *wwan_rfkill; - -static const struct dmi_system_id __initdata dell_device_table[] = { - { - .ident = "Dell laptop", - .matches = { - DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."), - DMI_MATCH(DMI_CHASSIS_TYPE, "8"), - }, - }, - { } -}; - -static void parse_da_table(const struct dmi_header *dm) -{ - /* Final token is a terminator, so we don't want to copy it */ - int tokens = (dm->length-11)/sizeof(struct calling_interface_token)-1; - struct calling_interface_structure *table = - container_of(dm, struct calling_interface_structure, header); - - /* 4 bytes of table header, plus 7 bytes of Dell header, plus at least - 6 bytes of entry */ - - if (dm->length < 17) - return; - - da_command_address = table->cmdIOAddress; - da_command_code = table->cmdIOCode; - - da_tokens = krealloc(da_tokens, (da_num_tokens + tokens) * - sizeof(struct calling_interface_token), - GFP_KERNEL); - - if (!da_tokens) - return; - - memcpy(da_tokens+da_num_tokens, table->tokens, - sizeof(struct calling_interface_token) * tokens); - - da_num_tokens += tokens; -} - -static void find_tokens(const struct dmi_header *dm) -{ - switch (dm->type) { - case 0xd4: /* Indexed IO */ - break; - case 0xd5: /* Protected Area Type 1 */ - break; - case 0xd6: /* Protected Area Type 2 */ - break; - case 0xda: /* Calling interface */ - parse_da_table(dm); - break; - } -} - -static int find_token_location(int tokenid) -{ - int i; - for (i = 0; i < da_num_tokens; i++) { - if (da_tokens[i].tokenID == tokenid) - return da_tokens[i].location; - } - - return -1; -} - -static struct calling_interface_buffer * -dell_send_request(struct calling_interface_buffer *buffer, int class, - int select) -{ - struct smi_cmd command; - - command.magic = SMI_CMD_MAGIC; - command.command_address = da_command_address; - command.command_code = da_command_code; - command.ebx = virt_to_phys(buffer); - command.ecx = 0x42534931; - - buffer->class = class; - buffer->select = select; - - dcdbas_smi_request(&command); - - return buffer; -} - -/* Derived from information in DellWirelessCtl.cpp: - Class 17, select 11 is radio control. It returns an array of 32-bit values. - - result[0]: return code - result[1]: - Bit 0: Hardware switch supported - Bit 1: Wifi locator supported - Bit 2: Wifi is supported - Bit 3: Bluetooth is supported - Bit 4: WWAN is supported - Bit 5: Wireless keyboard supported - Bits 6-7: Reserved - Bit 8: Wifi is installed - Bit 9: Bluetooth is installed - Bit 10: WWAN is installed - Bits 11-15: Reserved - Bit 16: Hardware switch is on - Bit 17: Wifi is blocked - Bit 18: Bluetooth is blocked - Bit 19: WWAN is blocked - Bits 20-31: Reserved - result[2]: NVRAM size in bytes - result[3]: NVRAM format version number -*/ - -static int dell_rfkill_set(int radio, enum rfkill_state state) -{ - struct calling_interface_buffer buffer; - int disable = (state == RFKILL_STATE_UNBLOCKED) ? 0 : 1; - - memset(&buffer, 0, sizeof(struct calling_interface_buffer)); - buffer.input[0] = (1 | (radio<<8) | (disable << 16)); - dell_send_request(&buffer, 17, 11); - - return 0; -} - -static int dell_wifi_set(void *data, enum rfkill_state state) -{ - return dell_rfkill_set(1, state); -} - -static int dell_bluetooth_set(void *data, enum rfkill_state state) -{ - return dell_rfkill_set(2, state); -} - -static int dell_wwan_set(void *data, enum rfkill_state state) -{ - return dell_rfkill_set(3, state); -} - -static int dell_rfkill_get(int bit, enum rfkill_state *state) -{ - struct calling_interface_buffer buffer; - int status; - int new_state = RFKILL_STATE_HARD_BLOCKED; - - memset(&buffer, 0, sizeof(struct calling_interface_buffer)); - dell_send_request(&buffer, 17, 11); - status = buffer.output[1]; - - if (status & (1<<16)) - new_state = RFKILL_STATE_SOFT_BLOCKED; - - if (status & (1<name = "dell-wifi"; - wifi_rfkill->toggle_radio = dell_wifi_set; - wifi_rfkill->get_state = dell_wifi_get; - ret = rfkill_register(wifi_rfkill); - if (ret) - goto err_wifi; - } - - if ((status & (1<<3|1<<9)) == (1<<3|1<<9)) { - bluetooth_rfkill = rfkill_allocate(NULL, RFKILL_TYPE_BLUETOOTH); - if (!bluetooth_rfkill) - goto err_bluetooth; - bluetooth_rfkill->name = "dell-bluetooth"; - bluetooth_rfkill->toggle_radio = dell_bluetooth_set; - bluetooth_rfkill->get_state = dell_bluetooth_get; - ret = rfkill_register(bluetooth_rfkill); - if (ret) - goto err_bluetooth; - } - - if ((status & (1<<4|1<<10)) == (1<<4|1<<10)) { - wwan_rfkill = rfkill_allocate(NULL, RFKILL_TYPE_WWAN); - if (!wwan_rfkill) - goto err_wwan; - wwan_rfkill->name = "dell-wwan"; - wwan_rfkill->toggle_radio = dell_wwan_set; - wwan_rfkill->get_state = dell_wwan_get; - ret = rfkill_register(wwan_rfkill); - if (ret) - goto err_wwan; - } - - return 0; -err_wwan: - if (wwan_rfkill) - rfkill_free(wwan_rfkill); - if (bluetooth_rfkill) { - rfkill_unregister(bluetooth_rfkill); - bluetooth_rfkill = NULL; - } -err_bluetooth: - if (bluetooth_rfkill) - rfkill_free(bluetooth_rfkill); - if (wifi_rfkill) { - rfkill_unregister(wifi_rfkill); - wifi_rfkill = NULL; - } -err_wifi: - if (wifi_rfkill) - rfkill_free(wifi_rfkill); - - return ret; -} - -static int dell_send_intensity(struct backlight_device *bd) -{ - struct calling_interface_buffer buffer; - - memset(&buffer, 0, sizeof(struct calling_interface_buffer)); - buffer.input[0] = find_token_location(BRIGHTNESS_TOKEN); - buffer.input[1] = bd->props.brightness; - - if (buffer.input[0] == -1) - return -ENODEV; - - if (power_supply_is_system_supplied() > 0) - dell_send_request(&buffer, 1, 2); - else - dell_send_request(&buffer, 1, 1); - - return 0; -} - -static int dell_get_intensity(struct backlight_device *bd) -{ - struct calling_interface_buffer buffer; - - memset(&buffer, 0, sizeof(struct calling_interface_buffer)); - buffer.input[0] = find_token_location(BRIGHTNESS_TOKEN); - - if (buffer.input[0] == -1) - return -ENODEV; - - if (power_supply_is_system_supplied() > 0) - dell_send_request(&buffer, 0, 2); - else - dell_send_request(&buffer, 0, 1); - - return buffer.output[1]; -} - -static struct backlight_ops dell_ops = { - .get_brightness = dell_get_intensity, - .update_status = dell_send_intensity, -}; - -static int __init dell_init(void) -{ - struct calling_interface_buffer buffer; - int max_intensity = 0; - int ret; - - if (!dmi_check_system(dell_device_table)) - return -ENODEV; - - dmi_walk(find_tokens); - - if (!da_tokens) { - printk(KERN_INFO "dell-laptop: Unable to find dmi tokens\n"); - return -ENODEV; - } - - ret = dell_setup_rfkill(); - - if (ret) { - printk(KERN_WARNING "dell-laptop: Unable to setup rfkill\n"); - goto out; - } - -#ifdef CONFIG_ACPI - /* In the event of an ACPI backlight being available, don't - * register the platform controller. - */ - if (acpi_video_backlight_support()) - return 0; -#endif - - memset(&buffer, 0, sizeof(struct calling_interface_buffer)); - buffer.input[0] = find_token_location(BRIGHTNESS_TOKEN); - - if (buffer.input[0] != -1) { - dell_send_request(&buffer, 0, 2); - max_intensity = buffer.output[3]; - } - - if (max_intensity) { - dell_backlight_device = backlight_device_register( - "dell_backlight", - NULL, NULL, - &dell_ops); - - if (IS_ERR(dell_backlight_device)) { - ret = PTR_ERR(dell_backlight_device); - dell_backlight_device = NULL; - goto out; - } - - dell_backlight_device->props.max_brightness = max_intensity; - dell_backlight_device->props.brightness = - dell_get_intensity(dell_backlight_device); - backlight_update_status(dell_backlight_device); - } - - return 0; -out: - if (wifi_rfkill) - rfkill_unregister(wifi_rfkill); - if (bluetooth_rfkill) - rfkill_unregister(bluetooth_rfkill); - if (wwan_rfkill) - rfkill_unregister(wwan_rfkill); - kfree(da_tokens); - return ret; -} - -static void __exit dell_exit(void) -{ - backlight_device_unregister(dell_backlight_device); - if (wifi_rfkill) - rfkill_unregister(wifi_rfkill); - if (bluetooth_rfkill) - rfkill_unregister(bluetooth_rfkill); - if (wwan_rfkill) - rfkill_unregister(wwan_rfkill); -} - -module_init(dell_init); -module_exit(dell_exit); - -MODULE_AUTHOR("Matthew Garrett "); -MODULE_DESCRIPTION("Dell laptop driver"); -MODULE_LICENSE("GPL"); -MODULE_ALIAS("dmi:*svnDellInc.:*:ct8:*"); diff --git a/drivers/platform/x86/Kconfig b/drivers/platform/x86/Kconfig index e65448e99b4..9e8f9485f9c 100644 --- a/drivers/platform/x86/Kconfig +++ b/drivers/platform/x86/Kconfig @@ -54,6 +54,18 @@ config ASUS_LAPTOP If you have an ACPI-compatible ASUS laptop, say Y or M here. +config DELL_LAPTOP + tristate "Dell Laptop Extras (EXPERIMENTAL)" + depends on X86 + depends on DCDBAS + depends on EXPERIMENTAL + depends on BACKLIGHT_CLASS_DEVICE + depends on RFKILL + default n + ---help--- + This driver adds support for rfkill and backlight control to Dell + laptops. + config FUJITSU_LAPTOP tristate "Fujitsu Laptop Extras" depends on ACPI diff --git a/drivers/platform/x86/Makefile b/drivers/platform/x86/Makefile index 1e9de2ae0de..e29065120be 100644 --- a/drivers/platform/x86/Makefile +++ b/drivers/platform/x86/Makefile @@ -6,6 +6,7 @@ obj-$(CONFIG_ASUS_LAPTOP) += asus-laptop.o obj-$(CONFIG_EEEPC_LAPTOP) += eeepc-laptop.o obj-$(CONFIG_MSI_LAPTOP) += msi-laptop.o obj-$(CONFIG_COMPAL_LAPTOP) += compal-laptop.o +obj-$(CONFIG_DELL_LAPTOP) += dell-laptop.o obj-$(CONFIG_ACER_WMI) += acer-wmi.o obj-$(CONFIG_HP_WMI) += hp-wmi.o obj-$(CONFIG_TC1100_WMI) += tc1100-wmi.o diff --git a/drivers/platform/x86/dell-laptop.c b/drivers/platform/x86/dell-laptop.c new file mode 100644 index 00000000000..16e11c2ee19 --- /dev/null +++ b/drivers/platform/x86/dell-laptop.c @@ -0,0 +1,436 @@ +/* + * Driver for Dell laptop extras + * + * Copyright (c) Red Hat + * + * Based on documentation in the libsmbios package, Copyright (C) 2005 Dell + * Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include "../../firmware/dcdbas.h" + +#define BRIGHTNESS_TOKEN 0x7d + +/* This structure will be modified by the firmware when we enter + * system management mode, hence the volatiles */ + +struct calling_interface_buffer { + u16 class; + u16 select; + volatile u32 input[4]; + volatile u32 output[4]; +} __packed; + +struct calling_interface_token { + u16 tokenID; + u16 location; + union { + u16 value; + u16 stringlength; + }; +}; + +struct calling_interface_structure { + struct dmi_header header; + u16 cmdIOAddress; + u8 cmdIOCode; + u32 supportedCmds; + struct calling_interface_token tokens[]; +} __packed; + +static int da_command_address; +static int da_command_code; +static int da_num_tokens; +static struct calling_interface_token *da_tokens; + +static struct backlight_device *dell_backlight_device; +static struct rfkill *wifi_rfkill; +static struct rfkill *bluetooth_rfkill; +static struct rfkill *wwan_rfkill; + +static const struct dmi_system_id __initdata dell_device_table[] = { + { + .ident = "Dell laptop", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."), + DMI_MATCH(DMI_CHASSIS_TYPE, "8"), + }, + }, + { } +}; + +static void parse_da_table(const struct dmi_header *dm) +{ + /* Final token is a terminator, so we don't want to copy it */ + int tokens = (dm->length-11)/sizeof(struct calling_interface_token)-1; + struct calling_interface_structure *table = + container_of(dm, struct calling_interface_structure, header); + + /* 4 bytes of table header, plus 7 bytes of Dell header, plus at least + 6 bytes of entry */ + + if (dm->length < 17) + return; + + da_command_address = table->cmdIOAddress; + da_command_code = table->cmdIOCode; + + da_tokens = krealloc(da_tokens, (da_num_tokens + tokens) * + sizeof(struct calling_interface_token), + GFP_KERNEL); + + if (!da_tokens) + return; + + memcpy(da_tokens+da_num_tokens, table->tokens, + sizeof(struct calling_interface_token) * tokens); + + da_num_tokens += tokens; +} + +static void find_tokens(const struct dmi_header *dm) +{ + switch (dm->type) { + case 0xd4: /* Indexed IO */ + break; + case 0xd5: /* Protected Area Type 1 */ + break; + case 0xd6: /* Protected Area Type 2 */ + break; + case 0xda: /* Calling interface */ + parse_da_table(dm); + break; + } +} + +static int find_token_location(int tokenid) +{ + int i; + for (i = 0; i < da_num_tokens; i++) { + if (da_tokens[i].tokenID == tokenid) + return da_tokens[i].location; + } + + return -1; +} + +static struct calling_interface_buffer * +dell_send_request(struct calling_interface_buffer *buffer, int class, + int select) +{ + struct smi_cmd command; + + command.magic = SMI_CMD_MAGIC; + command.command_address = da_command_address; + command.command_code = da_command_code; + command.ebx = virt_to_phys(buffer); + command.ecx = 0x42534931; + + buffer->class = class; + buffer->select = select; + + dcdbas_smi_request(&command); + + return buffer; +} + +/* Derived from information in DellWirelessCtl.cpp: + Class 17, select 11 is radio control. It returns an array of 32-bit values. + + result[0]: return code + result[1]: + Bit 0: Hardware switch supported + Bit 1: Wifi locator supported + Bit 2: Wifi is supported + Bit 3: Bluetooth is supported + Bit 4: WWAN is supported + Bit 5: Wireless keyboard supported + Bits 6-7: Reserved + Bit 8: Wifi is installed + Bit 9: Bluetooth is installed + Bit 10: WWAN is installed + Bits 11-15: Reserved + Bit 16: Hardware switch is on + Bit 17: Wifi is blocked + Bit 18: Bluetooth is blocked + Bit 19: WWAN is blocked + Bits 20-31: Reserved + result[2]: NVRAM size in bytes + result[3]: NVRAM format version number +*/ + +static int dell_rfkill_set(int radio, enum rfkill_state state) +{ + struct calling_interface_buffer buffer; + int disable = (state == RFKILL_STATE_UNBLOCKED) ? 0 : 1; + + memset(&buffer, 0, sizeof(struct calling_interface_buffer)); + buffer.input[0] = (1 | (radio<<8) | (disable << 16)); + dell_send_request(&buffer, 17, 11); + + return 0; +} + +static int dell_wifi_set(void *data, enum rfkill_state state) +{ + return dell_rfkill_set(1, state); +} + +static int dell_bluetooth_set(void *data, enum rfkill_state state) +{ + return dell_rfkill_set(2, state); +} + +static int dell_wwan_set(void *data, enum rfkill_state state) +{ + return dell_rfkill_set(3, state); +} + +static int dell_rfkill_get(int bit, enum rfkill_state *state) +{ + struct calling_interface_buffer buffer; + int status; + int new_state = RFKILL_STATE_HARD_BLOCKED; + + memset(&buffer, 0, sizeof(struct calling_interface_buffer)); + dell_send_request(&buffer, 17, 11); + status = buffer.output[1]; + + if (status & (1<<16)) + new_state = RFKILL_STATE_SOFT_BLOCKED; + + if (status & (1<name = "dell-wifi"; + wifi_rfkill->toggle_radio = dell_wifi_set; + wifi_rfkill->get_state = dell_wifi_get; + ret = rfkill_register(wifi_rfkill); + if (ret) + goto err_wifi; + } + + if ((status & (1<<3|1<<9)) == (1<<3|1<<9)) { + bluetooth_rfkill = rfkill_allocate(NULL, RFKILL_TYPE_BLUETOOTH); + if (!bluetooth_rfkill) + goto err_bluetooth; + bluetooth_rfkill->name = "dell-bluetooth"; + bluetooth_rfkill->toggle_radio = dell_bluetooth_set; + bluetooth_rfkill->get_state = dell_bluetooth_get; + ret = rfkill_register(bluetooth_rfkill); + if (ret) + goto err_bluetooth; + } + + if ((status & (1<<4|1<<10)) == (1<<4|1<<10)) { + wwan_rfkill = rfkill_allocate(NULL, RFKILL_TYPE_WWAN); + if (!wwan_rfkill) + goto err_wwan; + wwan_rfkill->name = "dell-wwan"; + wwan_rfkill->toggle_radio = dell_wwan_set; + wwan_rfkill->get_state = dell_wwan_get; + ret = rfkill_register(wwan_rfkill); + if (ret) + goto err_wwan; + } + + return 0; +err_wwan: + if (wwan_rfkill) + rfkill_free(wwan_rfkill); + if (bluetooth_rfkill) { + rfkill_unregister(bluetooth_rfkill); + bluetooth_rfkill = NULL; + } +err_bluetooth: + if (bluetooth_rfkill) + rfkill_free(bluetooth_rfkill); + if (wifi_rfkill) { + rfkill_unregister(wifi_rfkill); + wifi_rfkill = NULL; + } +err_wifi: + if (wifi_rfkill) + rfkill_free(wifi_rfkill); + + return ret; +} + +static int dell_send_intensity(struct backlight_device *bd) +{ + struct calling_interface_buffer buffer; + + memset(&buffer, 0, sizeof(struct calling_interface_buffer)); + buffer.input[0] = find_token_location(BRIGHTNESS_TOKEN); + buffer.input[1] = bd->props.brightness; + + if (buffer.input[0] == -1) + return -ENODEV; + + if (power_supply_is_system_supplied() > 0) + dell_send_request(&buffer, 1, 2); + else + dell_send_request(&buffer, 1, 1); + + return 0; +} + +static int dell_get_intensity(struct backlight_device *bd) +{ + struct calling_interface_buffer buffer; + + memset(&buffer, 0, sizeof(struct calling_interface_buffer)); + buffer.input[0] = find_token_location(BRIGHTNESS_TOKEN); + + if (buffer.input[0] == -1) + return -ENODEV; + + if (power_supply_is_system_supplied() > 0) + dell_send_request(&buffer, 0, 2); + else + dell_send_request(&buffer, 0, 1); + + return buffer.output[1]; +} + +static struct backlight_ops dell_ops = { + .get_brightness = dell_get_intensity, + .update_status = dell_send_intensity, +}; + +static int __init dell_init(void) +{ + struct calling_interface_buffer buffer; + int max_intensity = 0; + int ret; + + if (!dmi_check_system(dell_device_table)) + return -ENODEV; + + dmi_walk(find_tokens); + + if (!da_tokens) { + printk(KERN_INFO "dell-laptop: Unable to find dmi tokens\n"); + return -ENODEV; + } + + ret = dell_setup_rfkill(); + + if (ret) { + printk(KERN_WARNING "dell-laptop: Unable to setup rfkill\n"); + goto out; + } + +#ifdef CONFIG_ACPI + /* In the event of an ACPI backlight being available, don't + * register the platform controller. + */ + if (acpi_video_backlight_support()) + return 0; +#endif + + memset(&buffer, 0, sizeof(struct calling_interface_buffer)); + buffer.input[0] = find_token_location(BRIGHTNESS_TOKEN); + + if (buffer.input[0] != -1) { + dell_send_request(&buffer, 0, 2); + max_intensity = buffer.output[3]; + } + + if (max_intensity) { + dell_backlight_device = backlight_device_register( + "dell_backlight", + NULL, NULL, + &dell_ops); + + if (IS_ERR(dell_backlight_device)) { + ret = PTR_ERR(dell_backlight_device); + dell_backlight_device = NULL; + goto out; + } + + dell_backlight_device->props.max_brightness = max_intensity; + dell_backlight_device->props.brightness = + dell_get_intensity(dell_backlight_device); + backlight_update_status(dell_backlight_device); + } + + return 0; +out: + if (wifi_rfkill) + rfkill_unregister(wifi_rfkill); + if (bluetooth_rfkill) + rfkill_unregister(bluetooth_rfkill); + if (wwan_rfkill) + rfkill_unregister(wwan_rfkill); + kfree(da_tokens); + return ret; +} + +static void __exit dell_exit(void) +{ + backlight_device_unregister(dell_backlight_device); + if (wifi_rfkill) + rfkill_unregister(wifi_rfkill); + if (bluetooth_rfkill) + rfkill_unregister(bluetooth_rfkill); + if (wwan_rfkill) + rfkill_unregister(wwan_rfkill); +} + +module_init(dell_init); +module_exit(dell_exit); + +MODULE_AUTHOR("Matthew Garrett "); +MODULE_DESCRIPTION("Dell laptop driver"); +MODULE_LICENSE("GPL"); +MODULE_ALIAS("dmi:*svnDellInc.:*:ct8:*"); -- cgit v1.2.3 From d08ca2ca743f324eceba59e93188f9439e966bce Mon Sep 17 00:00:00 2001 From: Len Brown Date: Fri, 16 Jan 2009 13:52:03 -0500 Subject: ACPI: rename main.c to sleep.c Signed-off-by: Len Brown --- drivers/acpi/Makefile | 2 +- drivers/acpi/main.c | 747 -------------------------------------------------- drivers/acpi/sleep.c | 747 ++++++++++++++++++++++++++++++++++++++++++++++++++ 3 files changed, 748 insertions(+), 748 deletions(-) delete mode 100644 drivers/acpi/main.c create mode 100644 drivers/acpi/sleep.c diff --git a/drivers/acpi/Makefile b/drivers/acpi/Makefile index d80f4cc2e0d..65d90c720b5 100644 --- a/drivers/acpi/Makefile +++ b/drivers/acpi/Makefile @@ -19,7 +19,7 @@ obj-y += osl.o utils.o reboot.o\ # sleep related files obj-y += wakeup.o -obj-y += main.o +obj-y += sleep.o obj-$(CONFIG_ACPI_SLEEP) += proc.o diff --git a/drivers/acpi/main.c b/drivers/acpi/main.c deleted file mode 100644 index 7e3c609cbef..00000000000 --- a/drivers/acpi/main.c +++ /dev/null @@ -1,747 +0,0 @@ -/* - * sleep.c - ACPI sleep support. - * - * Copyright (c) 2005 Alexey Starikovskiy - * Copyright (c) 2004 David Shaohua Li - * Copyright (c) 2000-2003 Patrick Mochel - * Copyright (c) 2003 Open Source Development Lab - * - * This file is released under the GPLv2. - * - */ - -#include -#include -#include -#include -#include -#include - -#include - -#include -#include -#include "sleep.h" - -u8 sleep_states[ACPI_S_STATE_COUNT]; - -static void acpi_sleep_tts_switch(u32 acpi_state) -{ - union acpi_object in_arg = { ACPI_TYPE_INTEGER }; - struct acpi_object_list arg_list = { 1, &in_arg }; - acpi_status status = AE_OK; - - in_arg.integer.value = acpi_state; - status = acpi_evaluate_object(NULL, "\\_TTS", &arg_list, NULL); - if (ACPI_FAILURE(status) && status != AE_NOT_FOUND) { - /* - * OS can't evaluate the _TTS object correctly. Some warning - * message will be printed. But it won't break anything. - */ - printk(KERN_NOTICE "Failure in evaluating _TTS object\n"); - } -} - -static int tts_notify_reboot(struct notifier_block *this, - unsigned long code, void *x) -{ - acpi_sleep_tts_switch(ACPI_STATE_S5); - return NOTIFY_DONE; -} - -static struct notifier_block tts_notifier = { - .notifier_call = tts_notify_reboot, - .next = NULL, - .priority = 0, -}; - -static int acpi_sleep_prepare(u32 acpi_state) -{ -#ifdef CONFIG_ACPI_SLEEP - /* do we have a wakeup address for S2 and S3? */ - if (acpi_state == ACPI_STATE_S3) { - if (!acpi_wakeup_address) { - return -EFAULT; - } - acpi_set_firmware_waking_vector( - (acpi_physical_address)acpi_wakeup_address); - - } - ACPI_FLUSH_CPU_CACHE(); - acpi_enable_wakeup_device_prep(acpi_state); -#endif - printk(KERN_INFO PREFIX "Preparing to enter system sleep state S%d\n", - acpi_state); - acpi_enter_sleep_state_prep(acpi_state); - return 0; -} - -#ifdef CONFIG_ACPI_SLEEP -static u32 acpi_target_sleep_state = ACPI_STATE_S0; -/* - * ACPI 1.0 wants us to execute _PTS before suspending devices, so we allow the - * user to request that behavior by using the 'acpi_old_suspend_ordering' - * kernel command line option that causes the following variable to be set. - */ -static bool old_suspend_ordering; - -void __init acpi_old_suspend_ordering(void) -{ - old_suspend_ordering = true; -} - -/* - * According to the ACPI specification the BIOS should make sure that ACPI is - * enabled and SCI_EN bit is set on wake-up from S1 - S3 sleep states. Still, - * some BIOSes don't do that and therefore we use acpi_enable() to enable ACPI - * on such systems during resume. Unfortunately that doesn't help in - * particularly pathological cases in which SCI_EN has to be set directly on - * resume, although the specification states very clearly that this flag is - * owned by the hardware. The set_sci_en_on_resume variable will be set in such - * cases. - */ -static bool set_sci_en_on_resume; -/* - * The ACPI specification wants us to save NVS memory regions during hibernation - * and to restore them during the subsequent resume. However, it is not certain - * if this mechanism is going to work on all machines, so we allow the user to - * disable this mechanism using the 'acpi_sleep=s4_nonvs' kernel command line - * option. - */ -static bool s4_no_nvs; - -void __init acpi_s4_no_nvs(void) -{ - s4_no_nvs = true; -} - -/** - * acpi_pm_disable_gpes - Disable the GPEs. - */ -static int acpi_pm_disable_gpes(void) -{ - acpi_disable_all_gpes(); - return 0; -} - -/** - * __acpi_pm_prepare - Prepare the platform to enter the target state. - * - * If necessary, set the firmware waking vector and do arch-specific - * nastiness to get the wakeup code to the waking vector. - */ -static int __acpi_pm_prepare(void) -{ - int error = acpi_sleep_prepare(acpi_target_sleep_state); - - if (error) - acpi_target_sleep_state = ACPI_STATE_S0; - return error; -} - -/** - * acpi_pm_prepare - Prepare the platform to enter the target sleep - * state and disable the GPEs. - */ -static int acpi_pm_prepare(void) -{ - int error = __acpi_pm_prepare(); - - if (!error) - acpi_disable_all_gpes(); - return error; -} - -/** - * acpi_pm_finish - Instruct the platform to leave a sleep state. - * - * This is called after we wake back up (or if entering the sleep state - * failed). - */ -static void acpi_pm_finish(void) -{ - u32 acpi_state = acpi_target_sleep_state; - - if (acpi_state == ACPI_STATE_S0) - return; - - printk(KERN_INFO PREFIX "Waking up from system sleep state S%d\n", - acpi_state); - acpi_disable_wakeup_device(acpi_state); - acpi_leave_sleep_state(acpi_state); - - /* reset firmware waking vector */ - acpi_set_firmware_waking_vector((acpi_physical_address) 0); - - acpi_target_sleep_state = ACPI_STATE_S0; -} - -/** - * acpi_pm_end - Finish up suspend sequence. - */ -static void acpi_pm_end(void) -{ - /* - * This is necessary in case acpi_pm_finish() is not called during a - * failing transition to a sleep state. - */ - acpi_target_sleep_state = ACPI_STATE_S0; - acpi_sleep_tts_switch(acpi_target_sleep_state); -} -#else /* !CONFIG_ACPI_SLEEP */ -#define acpi_target_sleep_state ACPI_STATE_S0 -#endif /* CONFIG_ACPI_SLEEP */ - -#ifdef CONFIG_SUSPEND -extern void do_suspend_lowlevel(void); - -static u32 acpi_suspend_states[] = { - [PM_SUSPEND_ON] = ACPI_STATE_S0, - [PM_SUSPEND_STANDBY] = ACPI_STATE_S1, - [PM_SUSPEND_MEM] = ACPI_STATE_S3, - [PM_SUSPEND_MAX] = ACPI_STATE_S5 -}; - -/** - * acpi_suspend_begin - Set the target system sleep state to the state - * associated with given @pm_state, if supported. - */ -static int acpi_suspend_begin(suspend_state_t pm_state) -{ - u32 acpi_state = acpi_suspend_states[pm_state]; - int error = 0; - - if (sleep_states[acpi_state]) { - acpi_target_sleep_state = acpi_state; - acpi_sleep_tts_switch(acpi_target_sleep_state); - } else { - printk(KERN_ERR "ACPI does not support this state: %d\n", - pm_state); - error = -ENOSYS; - } - return error; -} - -/** - * acpi_suspend_enter - Actually enter a sleep state. - * @pm_state: ignored - * - * Flush caches and go to sleep. For STR we have to call arch-specific - * assembly, which in turn call acpi_enter_sleep_state(). - * It's unfortunate, but it works. Please fix if you're feeling frisky. - */ -static int acpi_suspend_enter(suspend_state_t pm_state) -{ - acpi_status status = AE_OK; - unsigned long flags = 0; - u32 acpi_state = acpi_target_sleep_state; - - ACPI_FLUSH_CPU_CACHE(); - - /* Do arch specific saving of state. */ - if (acpi_state == ACPI_STATE_S3) { - int error = acpi_save_state_mem(); - - if (error) - return error; - } - - local_irq_save(flags); - acpi_enable_wakeup_device(acpi_state); - switch (acpi_state) { - case ACPI_STATE_S1: - barrier(); - status = acpi_enter_sleep_state(acpi_state); - break; - - case ACPI_STATE_S3: - do_suspend_lowlevel(); - break; - } - - /* If ACPI is not enabled by the BIOS, we need to enable it here. */ - if (set_sci_en_on_resume) - acpi_set_register(ACPI_BITREG_SCI_ENABLE, 1); - else - acpi_enable(); - - /* Reprogram control registers and execute _BFS */ - acpi_leave_sleep_state_prep(acpi_state); - - /* ACPI 3.0 specs (P62) says that it's the responsibility - * of the OSPM to clear the status bit [ implying that the - * POWER_BUTTON event should not reach userspace ] - */ - if (ACPI_SUCCESS(status) && (acpi_state == ACPI_STATE_S3)) - acpi_clear_event(ACPI_EVENT_POWER_BUTTON); - - /* - * Disable and clear GPE status before interrupt is enabled. Some GPEs - * (like wakeup GPE) haven't handler, this can avoid such GPE misfire. - * acpi_leave_sleep_state will reenable specific GPEs later - */ - acpi_disable_all_gpes(); - - local_irq_restore(flags); - printk(KERN_DEBUG "Back to C!\n"); - - /* restore processor state */ - if (acpi_state == ACPI_STATE_S3) - acpi_restore_state_mem(); - - return ACPI_SUCCESS(status) ? 0 : -EFAULT; -} - -static int acpi_suspend_state_valid(suspend_state_t pm_state) -{ - u32 acpi_state; - - switch (pm_state) { - case PM_SUSPEND_ON: - case PM_SUSPEND_STANDBY: - case PM_SUSPEND_MEM: - acpi_state = acpi_suspend_states[pm_state]; - - return sleep_states[acpi_state]; - default: - return 0; - } -} - -static struct platform_suspend_ops acpi_suspend_ops = { - .valid = acpi_suspend_state_valid, - .begin = acpi_suspend_begin, - .prepare = acpi_pm_prepare, - .enter = acpi_suspend_enter, - .finish = acpi_pm_finish, - .end = acpi_pm_end, -}; - -/** - * acpi_suspend_begin_old - Set the target system sleep state to the - * state associated with given @pm_state, if supported, and - * execute the _PTS control method. This function is used if the - * pre-ACPI 2.0 suspend ordering has been requested. - */ -static int acpi_suspend_begin_old(suspend_state_t pm_state) -{ - int error = acpi_suspend_begin(pm_state); - - if (!error) - error = __acpi_pm_prepare(); - return error; -} - -/* - * The following callbacks are used if the pre-ACPI 2.0 suspend ordering has - * been requested. - */ -static struct platform_suspend_ops acpi_suspend_ops_old = { - .valid = acpi_suspend_state_valid, - .begin = acpi_suspend_begin_old, - .prepare = acpi_pm_disable_gpes, - .enter = acpi_suspend_enter, - .finish = acpi_pm_finish, - .end = acpi_pm_end, - .recover = acpi_pm_finish, -}; - -static int __init init_old_suspend_ordering(const struct dmi_system_id *d) -{ - old_suspend_ordering = true; - return 0; -} - -static int __init init_set_sci_en_on_resume(const struct dmi_system_id *d) -{ - set_sci_en_on_resume = true; - return 0; -} - -static struct dmi_system_id __initdata acpisleep_dmi_table[] = { - { - .callback = init_old_suspend_ordering, - .ident = "Abit KN9 (nForce4 variant)", - .matches = { - DMI_MATCH(DMI_BOARD_VENDOR, "http://www.abit.com.tw/"), - DMI_MATCH(DMI_BOARD_NAME, "KN9 Series(NF-CK804)"), - }, - }, - { - .callback = init_old_suspend_ordering, - .ident = "HP xw4600 Workstation", - .matches = { - DMI_MATCH(DMI_SYS_VENDOR, "Hewlett-Packard"), - DMI_MATCH(DMI_PRODUCT_NAME, "HP xw4600 Workstation"), - }, - }, - { - .callback = init_set_sci_en_on_resume, - .ident = "Apple MacBook 1,1", - .matches = { - DMI_MATCH(DMI_SYS_VENDOR, "Apple Computer, Inc."), - DMI_MATCH(DMI_PRODUCT_NAME, "MacBook1,1"), - }, - }, - { - .callback = init_set_sci_en_on_resume, - .ident = "Apple MacMini 1,1", - .matches = { - DMI_MATCH(DMI_SYS_VENDOR, "Apple Computer, Inc."), - DMI_MATCH(DMI_PRODUCT_NAME, "Macmini1,1"), - }, - }, - {}, -}; -#endif /* CONFIG_SUSPEND */ - -#ifdef CONFIG_HIBERNATION -static unsigned long s4_hardware_signature; -static struct acpi_table_facs *facs; -static bool nosigcheck; - -void __init acpi_no_s4_hw_signature(void) -{ - nosigcheck = true; -} - -static int acpi_hibernation_begin(void) -{ - int error; - - error = s4_no_nvs ? 0 : hibernate_nvs_alloc(); - if (!error) { - acpi_target_sleep_state = ACPI_STATE_S4; - acpi_sleep_tts_switch(acpi_target_sleep_state); - } - - return error; -} - -static int acpi_hibernation_pre_snapshot(void) -{ - int error = acpi_pm_prepare(); - - if (!error) - hibernate_nvs_save(); - - return error; -} - -static int acpi_hibernation_enter(void) -{ - acpi_status status = AE_OK; - unsigned long flags = 0; - - ACPI_FLUSH_CPU_CACHE(); - - local_irq_save(flags); - acpi_enable_wakeup_device(ACPI_STATE_S4); - /* This shouldn't return. If it returns, we have a problem */ - status = acpi_enter_sleep_state(ACPI_STATE_S4); - /* Reprogram control registers and execute _BFS */ - acpi_leave_sleep_state_prep(ACPI_STATE_S4); - local_irq_restore(flags); - - return ACPI_SUCCESS(status) ? 0 : -EFAULT; -} - -static void acpi_hibernation_finish(void) -{ - hibernate_nvs_free(); - acpi_pm_finish(); -} - -static void acpi_hibernation_leave(void) -{ - /* - * If ACPI is not enabled by the BIOS and the boot kernel, we need to - * enable it here. - */ - acpi_enable(); - /* Reprogram control registers and execute _BFS */ - acpi_leave_sleep_state_prep(ACPI_STATE_S4); - /* Check the hardware signature */ - if (facs && s4_hardware_signature != facs->hardware_signature) { - printk(KERN_EMERG "ACPI: Hardware changed while hibernated, " - "cannot resume!\n"); - panic("ACPI S4 hardware signature mismatch"); - } - /* Restore the NVS memory area */ - hibernate_nvs_restore(); -} - -static void acpi_pm_enable_gpes(void) -{ - acpi_enable_all_runtime_gpes(); -} - -static struct platform_hibernation_ops acpi_hibernation_ops = { - .begin = acpi_hibernation_begin, - .end = acpi_pm_end, - .pre_snapshot = acpi_hibernation_pre_snapshot, - .finish = acpi_hibernation_finish, - .prepare = acpi_pm_prepare, - .enter = acpi_hibernation_enter, - .leave = acpi_hibernation_leave, - .pre_restore = acpi_pm_disable_gpes, - .restore_cleanup = acpi_pm_enable_gpes, -}; - -/** - * acpi_hibernation_begin_old - Set the target system sleep state to - * ACPI_STATE_S4 and execute the _PTS control method. This - * function is used if the pre-ACPI 2.0 suspend ordering has been - * requested. - */ -static int acpi_hibernation_begin_old(void) -{ - int error; - /* - * The _TTS object should always be evaluated before the _PTS object. - * When the old_suspended_ordering is true, the _PTS object is - * evaluated in the acpi_sleep_prepare. - */ - acpi_sleep_tts_switch(ACPI_STATE_S4); - - error = acpi_sleep_prepare(ACPI_STATE_S4); - - if (!error) { - if (!s4_no_nvs) - error = hibernate_nvs_alloc(); - if (!error) - acpi_target_sleep_state = ACPI_STATE_S4; - } - return error; -} - -static int acpi_hibernation_pre_snapshot_old(void) -{ - int error = acpi_pm_disable_gpes(); - - if (!error) - hibernate_nvs_save(); - - return error; -} - -/* - * The following callbacks are used if the pre-ACPI 2.0 suspend ordering has - * been requested. - */ -static struct platform_hibernation_ops acpi_hibernation_ops_old = { - .begin = acpi_hibernation_begin_old, - .end = acpi_pm_end, - .pre_snapshot = acpi_hibernation_pre_snapshot_old, - .finish = acpi_hibernation_finish, - .prepare = acpi_pm_disable_gpes, - .enter = acpi_hibernation_enter, - .leave = acpi_hibernation_leave, - .pre_restore = acpi_pm_disable_gpes, - .restore_cleanup = acpi_pm_enable_gpes, - .recover = acpi_pm_finish, -}; -#endif /* CONFIG_HIBERNATION */ - -int acpi_suspend(u32 acpi_state) -{ - suspend_state_t states[] = { - [1] = PM_SUSPEND_STANDBY, - [3] = PM_SUSPEND_MEM, - [5] = PM_SUSPEND_MAX - }; - - if (acpi_state < 6 && states[acpi_state]) - return pm_suspend(states[acpi_state]); - if (acpi_state == 4) - return hibernate(); - return -EINVAL; -} - -#ifdef CONFIG_PM_SLEEP -/** - * acpi_pm_device_sleep_state - return preferred power state of ACPI device - * in the system sleep state given by %acpi_target_sleep_state - * @dev: device to examine; its driver model wakeup flags control - * whether it should be able to wake up the system - * @d_min_p: used to store the upper limit of allowed states range - * Return value: preferred power state of the device on success, -ENODEV on - * failure (ie. if there's no 'struct acpi_device' for @dev) - * - * Find the lowest power (highest number) ACPI device power state that - * device @dev can be in while the system is in the sleep state represented - * by %acpi_target_sleep_state. If @wake is nonzero, the device should be - * able to wake up the system from this sleep state. If @d_min_p is set, - * the highest power (lowest number) device power state of @dev allowed - * in this system sleep state is stored at the location pointed to by it. - * - * The caller must ensure that @dev is valid before using this function. - * The caller is also responsible for figuring out if the device is - * supposed to be able to wake up the system and passing this information - * via @wake. - */ - -int acpi_pm_device_sleep_state(struct device *dev, int *d_min_p) -{ - acpi_handle handle = DEVICE_ACPI_HANDLE(dev); - struct acpi_device *adev; - char acpi_method[] = "_SxD"; - unsigned long long d_min, d_max; - - if (!handle || ACPI_FAILURE(acpi_bus_get_device(handle, &adev))) { - printk(KERN_DEBUG "ACPI handle has no context!\n"); - return -ENODEV; - } - - acpi_method[2] = '0' + acpi_target_sleep_state; - /* - * If the sleep state is S0, we will return D3, but if the device has - * _S0W, we will use the value from _S0W - */ - d_min = ACPI_STATE_D0; - d_max = ACPI_STATE_D3; - - /* - * If present, _SxD methods return the minimum D-state (highest power - * state) we can use for the corresponding S-states. Otherwise, the - * minimum D-state is D0 (ACPI 3.x). - * - * NOTE: We rely on acpi_evaluate_integer() not clobbering the integer - * provided -- that's our fault recovery, we ignore retval. - */ - if (acpi_target_sleep_state > ACPI_STATE_S0) - acpi_evaluate_integer(handle, acpi_method, NULL, &d_min); - - /* - * If _PRW says we can wake up the system from the target sleep state, - * the D-state returned by _SxD is sufficient for that (we assume a - * wakeup-aware driver if wake is set). Still, if _SxW exists - * (ACPI 3.x), it should return the maximum (lowest power) D-state that - * can wake the system. _S0W may be valid, too. - */ - if (acpi_target_sleep_state == ACPI_STATE_S0 || - (device_may_wakeup(dev) && adev->wakeup.state.enabled && - adev->wakeup.sleep_state <= acpi_target_sleep_state)) { - acpi_status status; - - acpi_method[3] = 'W'; - status = acpi_evaluate_integer(handle, acpi_method, NULL, - &d_max); - if (ACPI_FAILURE(status)) { - d_max = d_min; - } else if (d_max < d_min) { - /* Warn the user of the broken DSDT */ - printk(KERN_WARNING "ACPI: Wrong value from %s\n", - acpi_method); - /* Sanitize it */ - d_min = d_max; - } - } - - if (d_min_p) - *d_min_p = d_min; - return d_max; -} - -/** - * acpi_pm_device_sleep_wake - enable or disable the system wake-up - * capability of given device - * @dev: device to handle - * @enable: 'true' - enable, 'false' - disable the wake-up capability - */ -int acpi_pm_device_sleep_wake(struct device *dev, bool enable) -{ - acpi_handle handle; - struct acpi_device *adev; - - if (!device_may_wakeup(dev)) - return -EINVAL; - - handle = DEVICE_ACPI_HANDLE(dev); - if (!handle || ACPI_FAILURE(acpi_bus_get_device(handle, &adev))) { - printk(KERN_DEBUG "ACPI handle has no context!\n"); - return -ENODEV; - } - - return enable ? - acpi_enable_wakeup_device_power(adev, acpi_target_sleep_state) : - acpi_disable_wakeup_device_power(adev); -} -#endif - -static void acpi_power_off_prepare(void) -{ - /* Prepare to power off the system */ - acpi_sleep_prepare(ACPI_STATE_S5); - acpi_disable_all_gpes(); -} - -static void acpi_power_off(void) -{ - /* acpi_sleep_prepare(ACPI_STATE_S5) should have already been called */ - printk("%s called\n", __func__); - local_irq_disable(); - acpi_enable_wakeup_device(ACPI_STATE_S5); - acpi_enter_sleep_state(ACPI_STATE_S5); -} - -int __init acpi_sleep_init(void) -{ - acpi_status status; - u8 type_a, type_b; -#ifdef CONFIG_SUSPEND - int i = 0; - - dmi_check_system(acpisleep_dmi_table); -#endif - - if (acpi_disabled) - return 0; - - sleep_states[ACPI_STATE_S0] = 1; - printk(KERN_INFO PREFIX "(supports S0"); - -#ifdef CONFIG_SUSPEND - for (i = ACPI_STATE_S1; i < ACPI_STATE_S4; i++) { - status = acpi_get_sleep_type_data(i, &type_a, &type_b); - if (ACPI_SUCCESS(status)) { - sleep_states[i] = 1; - printk(" S%d", i); - } - } - - suspend_set_ops(old_suspend_ordering ? - &acpi_suspend_ops_old : &acpi_suspend_ops); -#endif - -#ifdef CONFIG_HIBERNATION - status = acpi_get_sleep_type_data(ACPI_STATE_S4, &type_a, &type_b); - if (ACPI_SUCCESS(status)) { - hibernation_set_ops(old_suspend_ordering ? - &acpi_hibernation_ops_old : &acpi_hibernation_ops); - sleep_states[ACPI_STATE_S4] = 1; - printk(" S4"); - if (!nosigcheck) { - acpi_get_table(ACPI_SIG_FACS, 1, - (struct acpi_table_header **)&facs); - if (facs) - s4_hardware_signature = - facs->hardware_signature; - } - } -#endif - status = acpi_get_sleep_type_data(ACPI_STATE_S5, &type_a, &type_b); - if (ACPI_SUCCESS(status)) { - sleep_states[ACPI_STATE_S5] = 1; - printk(" S5"); - pm_power_off_prepare = acpi_power_off_prepare; - pm_power_off = acpi_power_off; - } - printk(")\n"); - /* - * Register the tts_notifier to reboot notifier list so that the _TTS - * object can also be evaluated when the system enters S5. - */ - register_reboot_notifier(&tts_notifier); - return 0; -} diff --git a/drivers/acpi/sleep.c b/drivers/acpi/sleep.c new file mode 100644 index 00000000000..7e3c609cbef --- /dev/null +++ b/drivers/acpi/sleep.c @@ -0,0 +1,747 @@ +/* + * sleep.c - ACPI sleep support. + * + * Copyright (c) 2005 Alexey Starikovskiy + * Copyright (c) 2004 David Shaohua Li + * Copyright (c) 2000-2003 Patrick Mochel + * Copyright (c) 2003 Open Source Development Lab + * + * This file is released under the GPLv2. + * + */ + +#include +#include +#include +#include +#include +#include + +#include + +#include +#include +#include "sleep.h" + +u8 sleep_states[ACPI_S_STATE_COUNT]; + +static void acpi_sleep_tts_switch(u32 acpi_state) +{ + union acpi_object in_arg = { ACPI_TYPE_INTEGER }; + struct acpi_object_list arg_list = { 1, &in_arg }; + acpi_status status = AE_OK; + + in_arg.integer.value = acpi_state; + status = acpi_evaluate_object(NULL, "\\_TTS", &arg_list, NULL); + if (ACPI_FAILURE(status) && status != AE_NOT_FOUND) { + /* + * OS can't evaluate the _TTS object correctly. Some warning + * message will be printed. But it won't break anything. + */ + printk(KERN_NOTICE "Failure in evaluating _TTS object\n"); + } +} + +static int tts_notify_reboot(struct notifier_block *this, + unsigned long code, void *x) +{ + acpi_sleep_tts_switch(ACPI_STATE_S5); + return NOTIFY_DONE; +} + +static struct notifier_block tts_notifier = { + .notifier_call = tts_notify_reboot, + .next = NULL, + .priority = 0, +}; + +static int acpi_sleep_prepare(u32 acpi_state) +{ +#ifdef CONFIG_ACPI_SLEEP + /* do we have a wakeup address for S2 and S3? */ + if (acpi_state == ACPI_STATE_S3) { + if (!acpi_wakeup_address) { + return -EFAULT; + } + acpi_set_firmware_waking_vector( + (acpi_physical_address)acpi_wakeup_address); + + } + ACPI_FLUSH_CPU_CACHE(); + acpi_enable_wakeup_device_prep(acpi_state); +#endif + printk(KERN_INFO PREFIX "Preparing to enter system sleep state S%d\n", + acpi_state); + acpi_enter_sleep_state_prep(acpi_state); + return 0; +} + +#ifdef CONFIG_ACPI_SLEEP +static u32 acpi_target_sleep_state = ACPI_STATE_S0; +/* + * ACPI 1.0 wants us to execute _PTS before suspending devices, so we allow the + * user to request that behavior by using the 'acpi_old_suspend_ordering' + * kernel command line option that causes the following variable to be set. + */ +static bool old_suspend_ordering; + +void __init acpi_old_suspend_ordering(void) +{ + old_suspend_ordering = true; +} + +/* + * According to the ACPI specification the BIOS should make sure that ACPI is + * enabled and SCI_EN bit is set on wake-up from S1 - S3 sleep states. Still, + * some BIOSes don't do that and therefore we use acpi_enable() to enable ACPI + * on such systems during resume. Unfortunately that doesn't help in + * particularly pathological cases in which SCI_EN has to be set directly on + * resume, although the specification states very clearly that this flag is + * owned by the hardware. The set_sci_en_on_resume variable will be set in such + * cases. + */ +static bool set_sci_en_on_resume; +/* + * The ACPI specification wants us to save NVS memory regions during hibernation + * and to restore them during the subsequent resume. However, it is not certain + * if this mechanism is going to work on all machines, so we allow the user to + * disable this mechanism using the 'acpi_sleep=s4_nonvs' kernel command line + * option. + */ +static bool s4_no_nvs; + +void __init acpi_s4_no_nvs(void) +{ + s4_no_nvs = true; +} + +/** + * acpi_pm_disable_gpes - Disable the GPEs. + */ +static int acpi_pm_disable_gpes(void) +{ + acpi_disable_all_gpes(); + return 0; +} + +/** + * __acpi_pm_prepare - Prepare the platform to enter the target state. + * + * If necessary, set the firmware waking vector and do arch-specific + * nastiness to get the wakeup code to the waking vector. + */ +static int __acpi_pm_prepare(void) +{ + int error = acpi_sleep_prepare(acpi_target_sleep_state); + + if (error) + acpi_target_sleep_state = ACPI_STATE_S0; + return error; +} + +/** + * acpi_pm_prepare - Prepare the platform to enter the target sleep + * state and disable the GPEs. + */ +static int acpi_pm_prepare(void) +{ + int error = __acpi_pm_prepare(); + + if (!error) + acpi_disable_all_gpes(); + return error; +} + +/** + * acpi_pm_finish - Instruct the platform to leave a sleep state. + * + * This is called after we wake back up (or if entering the sleep state + * failed). + */ +static void acpi_pm_finish(void) +{ + u32 acpi_state = acpi_target_sleep_state; + + if (acpi_state == ACPI_STATE_S0) + return; + + printk(KERN_INFO PREFIX "Waking up from system sleep state S%d\n", + acpi_state); + acpi_disable_wakeup_device(acpi_state); + acpi_leave_sleep_state(acpi_state); + + /* reset firmware waking vector */ + acpi_set_firmware_waking_vector((acpi_physical_address) 0); + + acpi_target_sleep_state = ACPI_STATE_S0; +} + +/** + * acpi_pm_end - Finish up suspend sequence. + */ +static void acpi_pm_end(void) +{ + /* + * This is necessary in case acpi_pm_finish() is not called during a + * failing transition to a sleep state. + */ + acpi_target_sleep_state = ACPI_STATE_S0; + acpi_sleep_tts_switch(acpi_target_sleep_state); +} +#else /* !CONFIG_ACPI_SLEEP */ +#define acpi_target_sleep_state ACPI_STATE_S0 +#endif /* CONFIG_ACPI_SLEEP */ + +#ifdef CONFIG_SUSPEND +extern void do_suspend_lowlevel(void); + +static u32 acpi_suspend_states[] = { + [PM_SUSPEND_ON] = ACPI_STATE_S0, + [PM_SUSPEND_STANDBY] = ACPI_STATE_S1, + [PM_SUSPEND_MEM] = ACPI_STATE_S3, + [PM_SUSPEND_MAX] = ACPI_STATE_S5 +}; + +/** + * acpi_suspend_begin - Set the target system sleep state to the state + * associated with given @pm_state, if supported. + */ +static int acpi_suspend_begin(suspend_state_t pm_state) +{ + u32 acpi_state = acpi_suspend_states[pm_state]; + int error = 0; + + if (sleep_states[acpi_state]) { + acpi_target_sleep_state = acpi_state; + acpi_sleep_tts_switch(acpi_target_sleep_state); + } else { + printk(KERN_ERR "ACPI does not support this state: %d\n", + pm_state); + error = -ENOSYS; + } + return error; +} + +/** + * acpi_suspend_enter - Actually enter a sleep state. + * @pm_state: ignored + * + * Flush caches and go to sleep. For STR we have to call arch-specific + * assembly, which in turn call acpi_enter_sleep_state(). + * It's unfortunate, but it works. Please fix if you're feeling frisky. + */ +static int acpi_suspend_enter(suspend_state_t pm_state) +{ + acpi_status status = AE_OK; + unsigned long flags = 0; + u32 acpi_state = acpi_target_sleep_state; + + ACPI_FLUSH_CPU_CACHE(); + + /* Do arch specific saving of state. */ + if (acpi_state == ACPI_STATE_S3) { + int error = acpi_save_state_mem(); + + if (error) + return error; + } + + local_irq_save(flags); + acpi_enable_wakeup_device(acpi_state); + switch (acpi_state) { + case ACPI_STATE_S1: + barrier(); + status = acpi_enter_sleep_state(acpi_state); + break; + + case ACPI_STATE_S3: + do_suspend_lowlevel(); + break; + } + + /* If ACPI is not enabled by the BIOS, we need to enable it here. */ + if (set_sci_en_on_resume) + acpi_set_register(ACPI_BITREG_SCI_ENABLE, 1); + else + acpi_enable(); + + /* Reprogram control registers and execute _BFS */ + acpi_leave_sleep_state_prep(acpi_state); + + /* ACPI 3.0 specs (P62) says that it's the responsibility + * of the OSPM to clear the status bit [ implying that the + * POWER_BUTTON event should not reach userspace ] + */ + if (ACPI_SUCCESS(status) && (acpi_state == ACPI_STATE_S3)) + acpi_clear_event(ACPI_EVENT_POWER_BUTTON); + + /* + * Disable and clear GPE status before interrupt is enabled. Some GPEs + * (like wakeup GPE) haven't handler, this can avoid such GPE misfire. + * acpi_leave_sleep_state will reenable specific GPEs later + */ + acpi_disable_all_gpes(); + + local_irq_restore(flags); + printk(KERN_DEBUG "Back to C!\n"); + + /* restore processor state */ + if (acpi_state == ACPI_STATE_S3) + acpi_restore_state_mem(); + + return ACPI_SUCCESS(status) ? 0 : -EFAULT; +} + +static int acpi_suspend_state_valid(suspend_state_t pm_state) +{ + u32 acpi_state; + + switch (pm_state) { + case PM_SUSPEND_ON: + case PM_SUSPEND_STANDBY: + case PM_SUSPEND_MEM: + acpi_state = acpi_suspend_states[pm_state]; + + return sleep_states[acpi_state]; + default: + return 0; + } +} + +static struct platform_suspend_ops acpi_suspend_ops = { + .valid = acpi_suspend_state_valid, + .begin = acpi_suspend_begin, + .prepare = acpi_pm_prepare, + .enter = acpi_suspend_enter, + .finish = acpi_pm_finish, + .end = acpi_pm_end, +}; + +/** + * acpi_suspend_begin_old - Set the target system sleep state to the + * state associated with given @pm_state, if supported, and + * execute the _PTS control method. This function is used if the + * pre-ACPI 2.0 suspend ordering has been requested. + */ +static int acpi_suspend_begin_old(suspend_state_t pm_state) +{ + int error = acpi_suspend_begin(pm_state); + + if (!error) + error = __acpi_pm_prepare(); + return error; +} + +/* + * The following callbacks are used if the pre-ACPI 2.0 suspend ordering has + * been requested. + */ +static struct platform_suspend_ops acpi_suspend_ops_old = { + .valid = acpi_suspend_state_valid, + .begin = acpi_suspend_begin_old, + .prepare = acpi_pm_disable_gpes, + .enter = acpi_suspend_enter, + .finish = acpi_pm_finish, + .end = acpi_pm_end, + .recover = acpi_pm_finish, +}; + +static int __init init_old_suspend_ordering(const struct dmi_system_id *d) +{ + old_suspend_ordering = true; + return 0; +} + +static int __init init_set_sci_en_on_resume(const struct dmi_system_id *d) +{ + set_sci_en_on_resume = true; + return 0; +} + +static struct dmi_system_id __initdata acpisleep_dmi_table[] = { + { + .callback = init_old_suspend_ordering, + .ident = "Abit KN9 (nForce4 variant)", + .matches = { + DMI_MATCH(DMI_BOARD_VENDOR, "http://www.abit.com.tw/"), + DMI_MATCH(DMI_BOARD_NAME, "KN9 Series(NF-CK804)"), + }, + }, + { + .callback = init_old_suspend_ordering, + .ident = "HP xw4600 Workstation", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "Hewlett-Packard"), + DMI_MATCH(DMI_PRODUCT_NAME, "HP xw4600 Workstation"), + }, + }, + { + .callback = init_set_sci_en_on_resume, + .ident = "Apple MacBook 1,1", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "Apple Computer, Inc."), + DMI_MATCH(DMI_PRODUCT_NAME, "MacBook1,1"), + }, + }, + { + .callback = init_set_sci_en_on_resume, + .ident = "Apple MacMini 1,1", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "Apple Computer, Inc."), + DMI_MATCH(DMI_PRODUCT_NAME, "Macmini1,1"), + }, + }, + {}, +}; +#endif /* CONFIG_SUSPEND */ + +#ifdef CONFIG_HIBERNATION +static unsigned long s4_hardware_signature; +static struct acpi_table_facs *facs; +static bool nosigcheck; + +void __init acpi_no_s4_hw_signature(void) +{ + nosigcheck = true; +} + +static int acpi_hibernation_begin(void) +{ + int error; + + error = s4_no_nvs ? 0 : hibernate_nvs_alloc(); + if (!error) { + acpi_target_sleep_state = ACPI_STATE_S4; + acpi_sleep_tts_switch(acpi_target_sleep_state); + } + + return error; +} + +static int acpi_hibernation_pre_snapshot(void) +{ + int error = acpi_pm_prepare(); + + if (!error) + hibernate_nvs_save(); + + return error; +} + +static int acpi_hibernation_enter(void) +{ + acpi_status status = AE_OK; + unsigned long flags = 0; + + ACPI_FLUSH_CPU_CACHE(); + + local_irq_save(flags); + acpi_enable_wakeup_device(ACPI_STATE_S4); + /* This shouldn't return. If it returns, we have a problem */ + status = acpi_enter_sleep_state(ACPI_STATE_S4); + /* Reprogram control registers and execute _BFS */ + acpi_leave_sleep_state_prep(ACPI_STATE_S4); + local_irq_restore(flags); + + return ACPI_SUCCESS(status) ? 0 : -EFAULT; +} + +static void acpi_hibernation_finish(void) +{ + hibernate_nvs_free(); + acpi_pm_finish(); +} + +static void acpi_hibernation_leave(void) +{ + /* + * If ACPI is not enabled by the BIOS and the boot kernel, we need to + * enable it here. + */ + acpi_enable(); + /* Reprogram control registers and execute _BFS */ + acpi_leave_sleep_state_prep(ACPI_STATE_S4); + /* Check the hardware signature */ + if (facs && s4_hardware_signature != facs->hardware_signature) { + printk(KERN_EMERG "ACPI: Hardware changed while hibernated, " + "cannot resume!\n"); + panic("ACPI S4 hardware signature mismatch"); + } + /* Restore the NVS memory area */ + hibernate_nvs_restore(); +} + +static void acpi_pm_enable_gpes(void) +{ + acpi_enable_all_runtime_gpes(); +} + +static struct platform_hibernation_ops acpi_hibernation_ops = { + .begin = acpi_hibernation_begin, + .end = acpi_pm_end, + .pre_snapshot = acpi_hibernation_pre_snapshot, + .finish = acpi_hibernation_finish, + .prepare = acpi_pm_prepare, + .enter = acpi_hibernation_enter, + .leave = acpi_hibernation_leave, + .pre_restore = acpi_pm_disable_gpes, + .restore_cleanup = acpi_pm_enable_gpes, +}; + +/** + * acpi_hibernation_begin_old - Set the target system sleep state to + * ACPI_STATE_S4 and execute the _PTS control method. This + * function is used if the pre-ACPI 2.0 suspend ordering has been + * requested. + */ +static int acpi_hibernation_begin_old(void) +{ + int error; + /* + * The _TTS object should always be evaluated before the _PTS object. + * When the old_suspended_ordering is true, the _PTS object is + * evaluated in the acpi_sleep_prepare. + */ + acpi_sleep_tts_switch(ACPI_STATE_S4); + + error = acpi_sleep_prepare(ACPI_STATE_S4); + + if (!error) { + if (!s4_no_nvs) + error = hibernate_nvs_alloc(); + if (!error) + acpi_target_sleep_state = ACPI_STATE_S4; + } + return error; +} + +static int acpi_hibernation_pre_snapshot_old(void) +{ + int error = acpi_pm_disable_gpes(); + + if (!error) + hibernate_nvs_save(); + + return error; +} + +/* + * The following callbacks are used if the pre-ACPI 2.0 suspend ordering has + * been requested. + */ +static struct platform_hibernation_ops acpi_hibernation_ops_old = { + .begin = acpi_hibernation_begin_old, + .end = acpi_pm_end, + .pre_snapshot = acpi_hibernation_pre_snapshot_old, + .finish = acpi_hibernation_finish, + .prepare = acpi_pm_disable_gpes, + .enter = acpi_hibernation_enter, + .leave = acpi_hibernation_leave, + .pre_restore = acpi_pm_disable_gpes, + .restore_cleanup = acpi_pm_enable_gpes, + .recover = acpi_pm_finish, +}; +#endif /* CONFIG_HIBERNATION */ + +int acpi_suspend(u32 acpi_state) +{ + suspend_state_t states[] = { + [1] = PM_SUSPEND_STANDBY, + [3] = PM_SUSPEND_MEM, + [5] = PM_SUSPEND_MAX + }; + + if (acpi_state < 6 && states[acpi_state]) + return pm_suspend(states[acpi_state]); + if (acpi_state == 4) + return hibernate(); + return -EINVAL; +} + +#ifdef CONFIG_PM_SLEEP +/** + * acpi_pm_device_sleep_state - return preferred power state of ACPI device + * in the system sleep state given by %acpi_target_sleep_state + * @dev: device to examine; its driver model wakeup flags control + * whether it should be able to wake up the system + * @d_min_p: used to store the upper limit of allowed states range + * Return value: preferred power state of the device on success, -ENODEV on + * failure (ie. if there's no 'struct acpi_device' for @dev) + * + * Find the lowest power (highest number) ACPI device power state that + * device @dev can be in while the system is in the sleep state represented + * by %acpi_target_sleep_state. If @wake is nonzero, the device should be + * able to wake up the system from this sleep state. If @d_min_p is set, + * the highest power (lowest number) device power state of @dev allowed + * in this system sleep state is stored at the location pointed to by it. + * + * The caller must ensure that @dev is valid before using this function. + * The caller is also responsible for figuring out if the device is + * supposed to be able to wake up the system and passing this information + * via @wake. + */ + +int acpi_pm_device_sleep_state(struct device *dev, int *d_min_p) +{ + acpi_handle handle = DEVICE_ACPI_HANDLE(dev); + struct acpi_device *adev; + char acpi_method[] = "_SxD"; + unsigned long long d_min, d_max; + + if (!handle || ACPI_FAILURE(acpi_bus_get_device(handle, &adev))) { + printk(KERN_DEBUG "ACPI handle has no context!\n"); + return -ENODEV; + } + + acpi_method[2] = '0' + acpi_target_sleep_state; + /* + * If the sleep state is S0, we will return D3, but if the device has + * _S0W, we will use the value from _S0W + */ + d_min = ACPI_STATE_D0; + d_max = ACPI_STATE_D3; + + /* + * If present, _SxD methods return the minimum D-state (highest power + * state) we can use for the corresponding S-states. Otherwise, the + * minimum D-state is D0 (ACPI 3.x). + * + * NOTE: We rely on acpi_evaluate_integer() not clobbering the integer + * provided -- that's our fault recovery, we ignore retval. + */ + if (acpi_target_sleep_state > ACPI_STATE_S0) + acpi_evaluate_integer(handle, acpi_method, NULL, &d_min); + + /* + * If _PRW says we can wake up the system from the target sleep state, + * the D-state returned by _SxD is sufficient for that (we assume a + * wakeup-aware driver if wake is set). Still, if _SxW exists + * (ACPI 3.x), it should return the maximum (lowest power) D-state that + * can wake the system. _S0W may be valid, too. + */ + if (acpi_target_sleep_state == ACPI_STATE_S0 || + (device_may_wakeup(dev) && adev->wakeup.state.enabled && + adev->wakeup.sleep_state <= acpi_target_sleep_state)) { + acpi_status status; + + acpi_method[3] = 'W'; + status = acpi_evaluate_integer(handle, acpi_method, NULL, + &d_max); + if (ACPI_FAILURE(status)) { + d_max = d_min; + } else if (d_max < d_min) { + /* Warn the user of the broken DSDT */ + printk(KERN_WARNING "ACPI: Wrong value from %s\n", + acpi_method); + /* Sanitize it */ + d_min = d_max; + } + } + + if (d_min_p) + *d_min_p = d_min; + return d_max; +} + +/** + * acpi_pm_device_sleep_wake - enable or disable the system wake-up + * capability of given device + * @dev: device to handle + * @enable: 'true' - enable, 'false' - disable the wake-up capability + */ +int acpi_pm_device_sleep_wake(struct device *dev, bool enable) +{ + acpi_handle handle; + struct acpi_device *adev; + + if (!device_may_wakeup(dev)) + return -EINVAL; + + handle = DEVICE_ACPI_HANDLE(dev); + if (!handle || ACPI_FAILURE(acpi_bus_get_device(handle, &adev))) { + printk(KERN_DEBUG "ACPI handle has no context!\n"); + return -ENODEV; + } + + return enable ? + acpi_enable_wakeup_device_power(adev, acpi_target_sleep_state) : + acpi_disable_wakeup_device_power(adev); +} +#endif + +static void acpi_power_off_prepare(void) +{ + /* Prepare to power off the system */ + acpi_sleep_prepare(ACPI_STATE_S5); + acpi_disable_all_gpes(); +} + +static void acpi_power_off(void) +{ + /* acpi_sleep_prepare(ACPI_STATE_S5) should have already been called */ + printk("%s called\n", __func__); + local_irq_disable(); + acpi_enable_wakeup_device(ACPI_STATE_S5); + acpi_enter_sleep_state(ACPI_STATE_S5); +} + +int __init acpi_sleep_init(void) +{ + acpi_status status; + u8 type_a, type_b; +#ifdef CONFIG_SUSPEND + int i = 0; + + dmi_check_system(acpisleep_dmi_table); +#endif + + if (acpi_disabled) + return 0; + + sleep_states[ACPI_STATE_S0] = 1; + printk(KERN_INFO PREFIX "(supports S0"); + +#ifdef CONFIG_SUSPEND + for (i = ACPI_STATE_S1; i < ACPI_STATE_S4; i++) { + status = acpi_get_sleep_type_data(i, &type_a, &type_b); + if (ACPI_SUCCESS(status)) { + sleep_states[i] = 1; + printk(" S%d", i); + } + } + + suspend_set_ops(old_suspend_ordering ? + &acpi_suspend_ops_old : &acpi_suspend_ops); +#endif + +#ifdef CONFIG_HIBERNATION + status = acpi_get_sleep_type_data(ACPI_STATE_S4, &type_a, &type_b); + if (ACPI_SUCCESS(status)) { + hibernation_set_ops(old_suspend_ordering ? + &acpi_hibernation_ops_old : &acpi_hibernation_ops); + sleep_states[ACPI_STATE_S4] = 1; + printk(" S4"); + if (!nosigcheck) { + acpi_get_table(ACPI_SIG_FACS, 1, + (struct acpi_table_header **)&facs); + if (facs) + s4_hardware_signature = + facs->hardware_signature; + } + } +#endif + status = acpi_get_sleep_type_data(ACPI_STATE_S5, &type_a, &type_b); + if (ACPI_SUCCESS(status)) { + sleep_states[ACPI_STATE_S5] = 1; + printk(" S5"); + pm_power_off_prepare = acpi_power_off_prepare; + pm_power_off = acpi_power_off; + } + printk(")\n"); + /* + * Register the tts_notifier to reboot notifier list so that the _TTS + * object can also be evaluated when the system enters S5. + */ + register_reboot_notifier(&tts_notifier); + return 0; +} -- cgit v1.2.3