From 8199d3a79c224bbe5943fa08684e1f93a17881b0 Mon Sep 17 00:00:00 2001 From: Christoph Lameter Date: Wed, 30 Mar 2005 13:34:31 -0800 Subject: [PATCH] A new 10GB Ethernet Driver by Chelsio Communications A Linux driver for the Chelsio 10Gb Ethernet Network Controller by Chelsio (http://www.chelsio.com). This driver supports the Chelsio N210 NIC and is backward compatible with the Chelsio N110 model 10Gb NICs. It supports AMD64, EM64T and x86 systems. Signed-off-by: Tina Yang Signed-off-by: Scott Bardone Signed-off-by: Christoph Lameter Adrian said: - my3126.c is unused (because t1_my3126_ops isn't used anywhere) - what are the EXTRA_CFLAGS in drivers/net/chelsio/Makefile for? - $(cxgb-y) in drivers/net/chelsio/Makefile seems to be unneeded - completely unused global functions: - espi.c: t1_espi_get_intr_counts - sge.c: t1_sge_get_intr_counts - the following functions can be made static: - sge.c: t1_espi_workaround - sge.c: t1_sge_tx - subr.c: __t1_tpi_read - subr.c: __t1_tpi_write - subr.c: t1_wait_op_done shemminger said: The performance recommendations in cxgb.txt are common to all fast devices, and should be in one file rather than just for this device. I would rather see ip-sysctl.txt updated or a new file on tuning recommendations started. Some of them have consequences that aren't documented well. For example, turning off TCP timestamps risks data corruption from sequence wrap. A new driver shouldn't need so may #ifdef's unless you want to putit on older vendor versions of 2.4 Some accessor and wrapper functions like: t1_pci_read_config_4 adapter_name t1_malloc are just annoying noise. Why have useless dead code like: /* Interrupt handler */ +static int pm3393_interrupt_handler(struct cmac *cmac) +{ + u32 master_intr_status; +/* + 1. Read master interrupt register. + 2. Read BLOCK's interrupt status registers. + 3. Handle BLOCK interrupts. +*/ Jeff said: step 1: kill all the OS wrappers. And do you really need hooks for multiple MACs, when only one MAC is really supported? Typically these hooks are at a higher level anyway -- struct net_device. From: Christoph Lameter Signed-off-by: Christoph Lameter Signed-off-by: Andrew Morton diff -puN /dev/null Documentation/networking/cxgb.txt --- Documentation/networking/cxgb.txt | 322 +++++++ drivers/net/Kconfig | 19 + drivers/net/Makefile | 1 + drivers/net/chelsio/Makefile | 12 + drivers/net/chelsio/ch_ethtool.h | 102 +++ drivers/net/chelsio/common.h | 269 ++++++ drivers/net/chelsio/cphy.h | 150 ++++ drivers/net/chelsio/cpl5_cmd.h | 145 +++ drivers/net/chelsio/cxgb2.c | 1231 ++++++++++++++++++++++++++ drivers/net/chelsio/cxgb2.h | 122 +++ drivers/net/chelsio/elmer0.h | 157 ++++ drivers/net/chelsio/espi.c | 386 ++++++++ drivers/net/chelsio/espi.h | 67 ++ drivers/net/chelsio/gmac.h | 133 +++ drivers/net/chelsio/mv88x201x.c | 258 ++++++ drivers/net/chelsio/osdep.h | 169 ++++ drivers/net/chelsio/pm3393.c | 831 ++++++++++++++++++ drivers/net/chelsio/regs.h | 453 ++++++++++ drivers/net/chelsio/sge.c | 1451 +++++++++++++++++++++++++++++++ drivers/net/chelsio/sge.h | 79 ++ drivers/net/chelsio/subr.c | 831 ++++++++++++++++++ drivers/net/chelsio/suni1x10gexp_regs.h | 221 +++++ drivers/net/chelsio/tp.c | 188 ++++ drivers/net/chelsio/tp.h | 110 +++ 24 files changed, 7707 insertions(+) create mode 100644 Documentation/networking/cxgb.txt create mode 100644 drivers/net/chelsio/Makefile create mode 100644 drivers/net/chelsio/ch_ethtool.h create mode 100644 drivers/net/chelsio/common.h create mode 100644 drivers/net/chelsio/cphy.h create mode 100644 drivers/net/chelsio/cpl5_cmd.h create mode 100644 drivers/net/chelsio/cxgb2.c create mode 100644 drivers/net/chelsio/cxgb2.h create mode 100644 drivers/net/chelsio/elmer0.h create mode 100644 drivers/net/chelsio/espi.c create mode 100644 drivers/net/chelsio/espi.h create mode 100644 drivers/net/chelsio/gmac.h create mode 100644 drivers/net/chelsio/mv88x201x.c create mode 100644 drivers/net/chelsio/osdep.h create mode 100644 drivers/net/chelsio/pm3393.c create mode 100644 drivers/net/chelsio/regs.h create mode 100644 drivers/net/chelsio/sge.c create mode 100644 drivers/net/chelsio/sge.h create mode 100644 drivers/net/chelsio/subr.c create mode 100644 drivers/net/chelsio/suni1x10gexp_regs.h create mode 100644 drivers/net/chelsio/tp.c create mode 100644 drivers/net/chelsio/tp.h diff --git a/Documentation/networking/cxgb.txt b/Documentation/networking/cxgb.txt new file mode 100644 index 00000000000..9f2eb646c6f --- /dev/null +++ b/Documentation/networking/cxgb.txt @@ -0,0 +1,322 @@ + Chelsio N210 10Gb Ethernet Network Controller + + Driver Release Notes for Linux + + Version 2.1.0 + + March 8, 2005 + +CONTENTS +======== + INTRODUCTION + FEATURES + PERFORMANCE + DRIVER MESSAGES + KNOWN ISSUES + SUPPORT + + +INTRODUCTION +============ + + This document describes the Linux driver for Chelsio 10Gb Ethernet Network + Controller. This driver supports the Chelsio N210 NIC and is backward + compatible with the Chelsio N110 model 10Gb NICs. This driver supports AMD64 + and EM64T, and x86 systems. + + +FEATURES +======== + + Adaptive Interrupts (adaptive-rx) + --------------------------------- + + This feature provides an adaptive algorithm that adjusts the interrupt + coalescing parameters, allowing the driver to dynamically adapt the latency + settings to achieve the highest performance during various types of network + load. + + The interface used to control this feature is ethtool. Please see the + ethtool manpage for additional usage information. + + By default, adaptive-rx is disabled. + To enable adaptive-rx: + + ethtool -C adaptive-rx on + + To disable adaptive-rx, use ethtool: + + ethtool -C adaptive-rx off + + After disabling adaptive-rx, the timer latency value will be set to 50us. + You may set the timer latency after disabling adaptive-rx: + + ethtool -C rx-usecs + + An example to set the timer latency value to 100us on eth0: + + ethtool -C eth0 rx-usecs 100 + + You may also provide a timer latency value while disabling adpative-rx: + + ethtool -C adaptive-rx off rx-usecs + + If adaptive-rx is disabled and a timer latency value is specified, the timer + will be set to the specified value until changed by the user or until + adaptive-rx is enabled. + + To view the status of the adaptive-rx and timer latency values: + + ethtool -c + + + TCP Segmentation Offloading (TSO) Support + ----------------------------------------- + + This feature, also known as "large send", enables a system's protocol stack + to offload portions of outbound TCP processing to a network interface card + thereby reducing system CPU utilization and enhancing performance. + + The interface used to control this feature is ethtool version 1.8 or higher. + Please see the ethtool manpage for additional usage information. + + By default, TSO is enabled. + To disable TSO: + + ethtool -K tso off + + To enable TSO: + + ethtool -K tso on + + To view the status of TSO: + + ethtool -k + + +PERFORMANCE +=========== + + The following information is provided as an example of how to change system + parameters for "performance tuning" an what value to use. You may or may not + want to change these system parameters, depending on your server/workstation + application. Doing so is not warranted in any way by Chelsio Communications, + and is done at "YOUR OWN RISK". Chelsio will not be held responsible for loss + of data or damage to equipment. + + Your distribution may have a different way of doing things, or you may prefer + a different method. These commands are shown only to provide an example of + what to do and are by no means definitive. + + Making any of the following system changes will only last until you reboot + your system. You may want to write a script that runs at boot-up which + includes the optimal settings for your system. + + Setting PCI Latency Timer: + setpci -d 1425:* 0x0c.l=0x0000F800 + + Disabling TCP timestamp: + sysctl -w net.ipv4.tcp_timestamps=0 + + Disabling SACK: + sysctl -w net.ipv4.tcp_sack=0 + + Setting TCP read buffers (min/default/max): + sysctl -w net.ipv4.tcp_rmem="10000000 10000000 10000000" + + Setting TCP write buffers (min/pressure/max): + sysctl -w net.ipv4.tcp_wmem="10000000 10000000 10000000" + + Setting TCP buffer space (min/pressure/max): + sysctl -w net.ipv4.tcp_mem="10000000 10000000 10000000" + + Setting large number of incoming connection requests (2.6.x only): + sysctl -w net.ipv4.tcp_max_syn_backlog=3000 + + Setting maximum receive socket buffer size: + sysctl -w net.core.rmem_max=524287 + + Setting maximum send socket buffer size: + sysctl -w net.core.wmem_max=524287 + + Setting default receive socket buffer size: + sysctl -w net.core.rmem_default=524287 + + Setting default send socket buffer size: + sysctl -w net.core.wmem_default=524287 + + Setting maximum option memory buffers: + sysctl -w net.core.optmem_max=524287 + + Setting maximum backlog (# of unprocessed packets before kernel drops): + sysctl -w net.core.netdev_max_backlog=300000 + + Set smp_affinity (on a multiprocessor system) to a single CPU: + echo 00000001 > /proc/irq//smp_affinity + + TCP window size for single connections: + The receive buffer (RX_WINDOW) size must be at least as large as the + Bandwidth-Delay Product of the communication link between the sender and + receiver. Due to the variations of RTT, you may want to increase the buffer + size up to 2 times the Bandwidth-Delay Product. Reference page 289 of + "TCP/IP Illustrated, Volume 1, The Protocols" by W. Richard Stevens. + At 10Gb speeds, use the following formula: + RX_WINDOW >= 1.25MBytes * RTT(in milliseconds) + Example for RTT with 100us: RX_WINDOW = (1,250,000 * 0.1) = 125,000 + RX_WINDOW sizes of 256KB - 512KB should be sufficient. + Setting the min, max, and default receive buffer (RX_WINDOW) size: + sysctl -w net.ipv4.tcp_rmem=" " + + TCP window size for multiple connections: + The receive buffer (RX_WINDOW) size may be calculated the same as single + connections, but should be divided by the number of connections. The + smaller window prevents congestion and facilitates better pacing, + especially if/when MAC level flow control does not work well or when it is + not supported on the machine. Experimentation may be necessary to attain + the correct value. This method is provided as a starting point fot the + correct receive buffer size. + Setting the min, max, and default receive buffer (RX_WINDOW) size is + performed in the same manner as single connection. + + +DRIVER MESSAGES +=============== + + The following messages are the most common messages logged by syslog. These + may be found in /var/log/messages. + + Driver up: + Chelsio Network Driver - version 2.1.0 + + NIC detected: + eth#: Chelsio N210 1x10GBaseX NIC (rev #), PCIX 133MHz/64-bit + + Link up: + eth#: link is up at 10 Gbps, full duplex + + Link down: + eth#: link is down + + +KNOWN ISSUES +============ + + These issues have been identified during testing. The following information + is provided as a workaround to the problem. In some cases, this problem is + inherent to Linux or to a particular Linux Distribution and/or hardware + platform. + + 1. Large number of TCP retransmits on a multiprocessor (SMP) system. + + On a system with multiple CPUs, the interrupt (IRQ) for the network + controller may be bound to more than one CPU. This will cause TCP + retransmits if the packet data were to be split across different CPUs + and re-assembled in a different order than expected. + + To eliminate the TCP retransmits, set smp_affinity on the particular + interrupt to a single CPU. You can locate the interrupt (IRQ) used on + the N110/N210 by using ifconfig: + ifconfig | grep Interrupt + Set the smp_affinity to a single CPU: + echo 1 > /proc/irq//smp_affinity + + It is highly suggested that you do not run the irqbalance daemon on your + system, as this will change any smp_affinity setting you have applied. + The irqbalance daemon runs on a 10 second interval and binds interrupts + to the least loaded CPU determined by the daemon. To disable this daemon: + chkconfig --level 2345 irqbalance off + + By default, some Linux distributions enable the kernel feature, + irqbalance, which performs the same function as the daemon. To disable + this feature, add the following line to your bootloader: + noirqbalance + + Example using the Grub bootloader: + title Red Hat Enterprise Linux AS (2.4.21-27.ELsmp) + root (hd0,0) + kernel /vmlinuz-2.4.21-27.ELsmp ro root=/dev/hda3 noirqbalance + initrd /initrd-2.4.21-27.ELsmp.img + + 2. After running insmod, the driver is loaded and the incorrect network + interface is brought up without running ifup. + + When using 2.4.x kernels, including RHEL kernels, the Linux kernel + invokes a script named "hotplug". This script is primarily used to + automatically bring up USB devices when they are plugged in, however, + the script also attempts to automatically bring up a network interface + after loading the kernel module. The hotplug script does this by scanning + the ifcfg-eth# config files in /etc/sysconfig/network-scripts, looking + for HWADDR=. + + If the hotplug script does not find the HWADDRR within any of the + ifcfg-eth# files, it will bring up the device with the next available + interface name. If this interface is already configured for a different + network card, your new interface will have incorrect IP address and + network settings. + + To solve this issue, you can add the HWADDR= key to the + interface config file of your network controller. + + To disable this "hotplug" feature, you may add the driver (module name) + to the "blacklist" file located in /etc/hotplug. It has been noted that + this does not work for network devices because the net.agent script + does not use the blacklist file. Simply remove, or rename, the net.agent + script located in /etc/hotplug to disable this feature. + + 3. Transport Protocol (TP) hangs when running heavy multi-connection traffic + on an AMD Opteron system with HyperTransport PCI-X Tunnel chipset. + + If your AMD Opteron system uses the AMD-8131 HyperTransport PCI-X Tunnel + chipset, you may experience the "133-Mhz Mode Split Completion Data + Corruption" bug identified by AMD while using a 133Mhz PCI-X card on the + bus PCI-X bus. + + AMD states, "Under highly specific conditions, the AMD-8131 PCI-X Tunnel + can provide stale data via split completion cycles to a PCI-X card that + is operating at 133 Mhz", causing data corruption. + + AMD's provides three workarounds for this problem, however, Chelsio + recommends the first option for best performance with this bug: + + For 133Mhz secondary bus operation, limit the transaction length and + the number of outstanding transactions, via BIOS configuration + programming of the PCI-X card, to the following: + + Data Length (bytes): 2k + Total allowed outstanding transactions: 1 + + Please refer to AMD 8131-HT/PCI-X Errata 26310 Rev 3.08 August 2004, + section 56, "133-MHz Mode Split Completion Data Corruption" for more + details with this bug and workarounds suggested by AMD. + + +SUPPORT +======= + + If you have problems with the software or hardware, please contact our + customer support team via email at support@chelsio.com or check our website + at http://www.chelsio.com + +=============================================================================== + + Chelsio Communications + 370 San Aleso Ave. + Suite 100 + Sunnyvale, CA 94085 + http://www.chelsio.com + +This program is free software; you can redistribute it and/or modify +it under the terms of the GNU General Public License, version 2, as +published by the Free Software Foundation. + +You should have received a copy of the GNU General Public License along +with this program; if not, write to the Free Software Foundation, Inc., +59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. + +THIS SOFTWARE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR IMPLIED +WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED WARRANTIES OF +MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. + + Copyright (c) 2003-2005 Chelsio Communications. All rights reserved. + +=============================================================================== diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig index 3a0a55b62aa..8a7928f1d57 100644 --- a/drivers/net/Kconfig +++ b/drivers/net/Kconfig @@ -2080,6 +2080,25 @@ endmenu menu "Ethernet (10000 Mbit)" depends on NETDEVICES && !UML +config CHELSIO_T1 + tristate "Chelsio 10Gb Ethernet support" + depends on PCI + help + This driver supports Chelsio N110 and N210 models 10Gb Ethernet + cards. More information about adapter features and performance + tuning is in . + + For general information about Chelsio and our products, visit + our website at . + + For customer support, please visit our customer support page at + . + + Please send feedback to . + + To compile this driver as a module, choose M here: the module + will be called cxgb. + config IXGB tristate "Intel(R) PRO/10GbE support" depends on PCI diff --git a/drivers/net/Makefile b/drivers/net/Makefile index 6202b10dbb4..1992166ffba 100644 --- a/drivers/net/Makefile +++ b/drivers/net/Makefile @@ -9,6 +9,7 @@ endif obj-$(CONFIG_E1000) += e1000/ obj-$(CONFIG_IBM_EMAC) += ibm_emac/ obj-$(CONFIG_IXGB) += ixgb/ +obj-$(CONFIG_CHELSIO_T1) += chelsio/ obj-$(CONFIG_BONDING) += bonding/ obj-$(CONFIG_GIANFAR) += gianfar_driver.o diff --git a/drivers/net/chelsio/Makefile b/drivers/net/chelsio/Makefile new file mode 100644 index 00000000000..ff8c11b3a4e --- /dev/null +++ b/drivers/net/chelsio/Makefile @@ -0,0 +1,12 @@ +# +# Chelsio 10Gb NIC driver for Linux. +# + +obj-$(CONFIG_CHELSIO_T1) += cxgb.o + +EXTRA_CFLAGS += -I$(TOPDIR)/drivers/net/chelsio $(DEBUG_FLAGS) + + +cxgb-objs := cxgb2.o espi.o tp.o pm3393.o sge.o subr.o mv88x201x.o + + diff --git a/drivers/net/chelsio/ch_ethtool.h b/drivers/net/chelsio/ch_ethtool.h new file mode 100644 index 00000000000..c523d24836b --- /dev/null +++ b/drivers/net/chelsio/ch_ethtool.h @@ -0,0 +1,102 @@ +/***************************************************************************** + * * + * File: ch_ethtool.h * + * $Revision: 1.5 $ * + * $Date: 2005/03/23 07:15:58 $ * + * Description: * + * part of the Chelsio 10Gb Ethernet Driver. * + * * + * This program is free software; you can redistribute it and/or modify * + * it under the terms of the GNU General Public License, version 2, as * + * published by the Free Software Foundation. * + * * + * You should have received a copy of the GNU General Public License along * + * with this program; if not, write to the Free Software Foundation, Inc., * + * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. * + * * + * THIS SOFTWARE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR IMPLIED * + * WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED WARRANTIES OF * + * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. * + * * + * http://www.chelsio.com * + * * + * Copyright (c) 2003 - 2005 Chelsio Communications, Inc. * + * All rights reserved. * + * * + * Maintainers: maintainers@chelsio.com * + * * + * Authors: Dimitrios Michailidis * + * Tina Yang * + * Felix Marti * + * Scott Bardone * + * Kurt Ottaway * + * Frank DiMambro * + * * + * History: * + * * + ****************************************************************************/ + +#ifndef __CHETHTOOL_LINUX_H__ +#define __CHETHTOOL_LINUX_H__ + +/* TCB size in 32-bit words */ +#define TCB_WORDS (TCB_SIZE / 4) + +enum { + ETHTOOL_SETREG, + ETHTOOL_GETREG, + ETHTOOL_SETTPI, + ETHTOOL_GETTPI, + ETHTOOL_DEVUP, + ETHTOOL_GETMTUTAB, + ETHTOOL_SETMTUTAB, + ETHTOOL_GETMTU, + ETHTOOL_SET_PM, + ETHTOOL_GET_PM, + ETHTOOL_GET_TCAM, + ETHTOOL_SET_TCAM, + ETHTOOL_GET_TCB, + ETHTOOL_READ_TCAM_WORD, +}; + +struct ethtool_reg { + uint32_t cmd; + uint32_t addr; + uint32_t val; +}; + +struct ethtool_mtus { + uint32_t cmd; + uint16_t mtus[NMTUS]; +}; + +struct ethtool_pm { + uint32_t cmd; + uint32_t tx_pg_sz; + uint32_t tx_num_pg; + uint32_t rx_pg_sz; + uint32_t rx_num_pg; + uint32_t pm_total; +}; + +struct ethtool_tcam { + uint32_t cmd; + uint32_t tcam_size; + uint32_t nservers; + uint32_t nroutes; +}; + +struct ethtool_tcb { + uint32_t cmd; + uint32_t tcb_index; + uint32_t tcb_data[TCB_WORDS]; +}; + +struct ethtool_tcam_word { + uint32_t cmd; + uint32_t addr; + uint32_t buf[3]; +}; + +#define SIOCCHETHTOOL SIOCDEVPRIVATE +#endif diff --git a/drivers/net/chelsio/common.h b/drivers/net/chelsio/common.h new file mode 100644 index 00000000000..017684ff48d --- /dev/null +++ b/drivers/net/chelsio/common.h @@ -0,0 +1,269 @@ +/***************************************************************************** + * * + * File: common.h * + * $Revision: 1.5 $ * + * $Date: 2005/03/23 07:41:27 $ * + * Description: * + * part of the Chelsio 10Gb Ethernet Driver. * + * * + * This program is free software; you can redistribute it and/or modify * + * it under the terms of the GNU General Public License, version 2, as * + * published by the Free Software Foundation. * + * * + * You should have received a copy of the GNU General Public License along * + * with this program; if not, write to the Free Software Foundation, Inc., * + * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. * + * * + * THIS SOFTWARE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR IMPLIED * + * WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED WARRANTIES OF * + * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. * + * * + * http://www.chelsio.com * + * * + * Copyright (c) 2003 - 2005 Chelsio Communications, Inc. * + * All rights reserved. * + * * + * Maintainers: maintainers@chelsio.com * + * * + * Authors: Dimitrios Michailidis * + * Tina Yang * + * Felix Marti * + * Scott Bardone * + * Kurt Ottaway * + * Frank DiMambro * + * * + * History: * + * * + ****************************************************************************/ + +#ifndef CHELSIO_COMMON_H +#define CHELSIO_COMMON_H + +#define DIMOF(x) (sizeof(x)/sizeof(x[0])) + +#define NMTUS 8 +#define MAX_NPORTS 4 +#define TCB_SIZE 128 + +enum { + CHBT_BOARD_7500, + CHBT_BOARD_8000, + CHBT_BOARD_CHT101, + CHBT_BOARD_CHT110, + CHBT_BOARD_CHT210, + CHBT_BOARD_CHT204, + CHBT_BOARD_N110, + CHBT_BOARD_N210, + CHBT_BOARD_COUGAR, + CHBT_BOARD_6800, + CHBT_BOARD_SIMUL +}; + +enum { + CHBT_TERM_FPGA, + CHBT_TERM_T1, + CHBT_TERM_T2, + CHBT_TERM_T3 +}; + +enum { + CHBT_MAC_CHELSIO_A, + CHBT_MAC_IXF1010, + CHBT_MAC_PM3393, + CHBT_MAC_VSC7321, + CHBT_MAC_DUMMY +}; + +enum { + CHBT_PHY_88E1041, + CHBT_PHY_88E1111, + CHBT_PHY_88X2010, + CHBT_PHY_XPAK, + CHBT_PHY_MY3126, + CHBT_PHY_DUMMY +}; + +enum { + PAUSE_RX = 1, + PAUSE_TX = 2, + PAUSE_AUTONEG = 4 +}; + +/* Revisions of T1 chip */ +#define TERM_T1A 0 +#define TERM_T1B 1 +#define TERM_T2 3 + +struct tp_params { + unsigned int pm_size; + unsigned int cm_size; + unsigned int pm_rx_base; + unsigned int pm_tx_base; + unsigned int pm_rx_pg_size; + unsigned int pm_tx_pg_size; + unsigned int pm_rx_num_pgs; + unsigned int pm_tx_num_pgs; + unsigned int use_5tuple_mode; +}; + +struct sge_params { + unsigned int cmdQ_size[2]; + unsigned int freelQ_size[2]; + unsigned int large_buf_capacity; + unsigned int rx_coalesce_usecs; + unsigned int last_rx_coalesce_raw; + unsigned int default_rx_coalesce_usecs; + unsigned int sample_interval_usecs; + unsigned int coalesce_enable; + unsigned int polling; +}; + +struct mc5_params { + unsigned int mode; /* selects MC5 width */ + unsigned int nservers; /* size of server region */ + unsigned int nroutes; /* size of routing region */ +}; + +/* Default MC5 region sizes */ +#define DEFAULT_SERVER_REGION_LEN 256 +#define DEFAULT_RT_REGION_LEN 1024 + +struct pci_params { + unsigned short speed; + unsigned char width; + unsigned char is_pcix; +}; + +struct adapter_params { + struct sge_params sge; + struct mc5_params mc5; + struct tp_params tp; + struct pci_params pci; + + const struct board_info *brd_info; + + unsigned short mtus[NMTUS]; + unsigned int nports; /* # of ethernet ports */ + unsigned int stats_update_period; + unsigned short chip_revision; + unsigned char chip_version; + unsigned char is_asic; +}; + +struct pci_err_cnt { + unsigned int master_parity_err; + unsigned int sig_target_abort; + unsigned int rcv_target_abort; + unsigned int rcv_master_abort; + unsigned int sig_sys_err; + unsigned int det_parity_err; + unsigned int pio_parity_err; + unsigned int wf_parity_err; + unsigned int rf_parity_err; + unsigned int cf_parity_err; +}; + +struct link_config { + unsigned int supported; /* link capabilities */ + unsigned int advertising; /* advertised capabilities */ + unsigned short requested_speed; /* speed user has requested */ + unsigned short speed; /* actual link speed */ + unsigned char requested_duplex; /* duplex user has requested */ + unsigned char duplex; /* actual link duplex */ + unsigned char requested_fc; /* flow control user has requested */ + unsigned char fc; /* actual link flow control */ + unsigned char autoneg; /* autonegotiating? */ +}; + +#define SPEED_INVALID 0xffff +#define DUPLEX_INVALID 0xff + +struct mdio_ops; +struct gmac; +struct gphy; + +struct board_info { + unsigned char board; + unsigned char port_number; + unsigned long caps; + unsigned char chip_term; + unsigned char chip_mac; + unsigned char chip_phy; + unsigned int clock_core; + unsigned int clock_mc3; + unsigned int clock_mc4; + unsigned int espi_nports; + unsigned int clock_cspi; + unsigned int clock_elmer0; + unsigned char mdio_mdien; + unsigned char mdio_mdiinv; + unsigned char mdio_mdc; + unsigned char mdio_phybaseaddr; + struct gmac *gmac; + struct gphy *gphy; + struct mdio_ops *mdio_ops; + const char *desc; +}; + +#include "osdep.h" + +#ifndef PCI_VENDOR_ID_CHELSIO +#define PCI_VENDOR_ID_CHELSIO 0x1425 +#endif + +extern struct pci_device_id t1_pci_tbl[]; + +static inline int t1_is_asic(const adapter_t *adapter) +{ + return adapter->params.is_asic; +} + +static inline int adapter_matches_type(const adapter_t *adapter, + int version, int revision) +{ + return adapter->params.chip_version == version && + adapter->params.chip_revision == revision; +} + +#define t1_is_T1B(adap) adapter_matches_type(adap, CHBT_TERM_T1, TERM_T1B) +#define is_T2(adap) adapter_matches_type(adap, CHBT_TERM_T2, TERM_T2) + +/* Returns true if an adapter supports VLAN acceleration and TSO */ +static inline int vlan_tso_capable(const adapter_t *adapter) +{ + return !t1_is_T1B(adapter); +} + +#define for_each_port(adapter, iter) \ + for (iter = 0; iter < (adapter)->params.nports; ++iter) + +#define board_info(adapter) ((adapter)->params.brd_info) +#define is_10G(adapter) (board_info(adapter)->caps & SUPPORTED_10000baseT_Full) + +static inline unsigned int core_ticks_per_usec(const adapter_t *adap) +{ + return board_info(adap)->clock_core / 1000000; +} + +int t1_tpi_write(adapter_t *adapter, u32 addr, u32 value); +int t1_tpi_read(adapter_t *adapter, u32 addr, u32 *value); + +void t1_interrupts_enable(adapter_t *adapter); +void t1_interrupts_disable(adapter_t *adapter); +void t1_interrupts_clear(adapter_t *adapter); +int elmer0_ext_intr_handler(adapter_t *adapter); +int t1_slow_intr_handler(adapter_t *adapter); + +int t1_link_start(struct cphy *phy, struct cmac *mac, struct link_config *lc); +const struct board_info *t1_get_board_info(unsigned int board_id); +const struct board_info *t1_get_board_info_from_ids(unsigned int devid, + unsigned short ssid); +int t1_seeprom_read(adapter_t *adapter, u32 addr, u32 *data); +int t1_get_board_rev(adapter_t *adapter, const struct board_info *bi, + struct adapter_params *p); +int t1_init_hw_modules(adapter_t *adapter); +int t1_init_sw_modules(adapter_t *adapter, const struct board_info *bi); +void t1_free_sw_modules(adapter_t *adapter); +void t1_fatal_err(adapter_t *adapter); +#endif + diff --git a/drivers/net/chelsio/cphy.h b/drivers/net/chelsio/cphy.h new file mode 100644 index 00000000000..1bc2248264c --- /dev/null +++ b/drivers/net/chelsio/cphy.h @@ -0,0 +1,150 @@ +/***************************************************************************** + * * + * File: cphy.h * + * $Revision: 1.4 $ * + * $Date: 2005/03/23 07:41:27 $ * + * Description: * + * part of the Chelsio 10Gb Ethernet Driver. * + * * + * This program is free software; you can redistribute it and/or modify * + * it under the terms of the GNU General Public License, version 2, as * + * published by the Free Software Foundation. * + * * + * You should have received a copy of the GNU General Public License along * + * with this program; if not, write to the Free Software Foundation, Inc., * + * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. * + * * + * THIS SOFTWARE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR IMPLIED * + * WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED WARRANTIES OF * + * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. * + * * + * http://www.chelsio.com * + * * + * Copyright (c) 2003 - 2005 Chelsio Communications, Inc. * + * All rights reserved. * + * * + * Maintainers: maintainers@chelsio.com * + * * + * Authors: Dimitrios Michailidis * + * Tina Yang * + * Felix Marti * + * Scott Bardone * + * Kurt Ottaway * + * Frank DiMambro * + * * + * History: * + * * + ****************************************************************************/ + +#ifndef CHELSIO_CPHY_H +#define CHELSIO_CPHY_H + +#include "common.h" + +struct mdio_ops { + void (*init)(adapter_t *adapter, const struct board_info *bi); + int (*read)(adapter_t *adapter, int phy_addr, int mmd_addr, + int reg_addr, unsigned int *val); + int (*write)(adapter_t *adapter, int phy_addr, int mmd_addr, + int reg_addr, unsigned int val); +}; + +/* PHY interrupt types */ +enum { + cphy_cause_link_change = 0x1, + cphy_cause_error = 0x2 +}; + +struct cphy; + +/* PHY operations */ +struct cphy_ops { + void (*destroy)(struct cphy *); + int (*reset)(struct cphy *, int wait); + + int (*interrupt_enable)(struct cphy *); + int (*interrupt_disable)(struct cphy *); + int (*interrupt_clear)(struct cphy *); + int (*interrupt_handler)(struct cphy *); + + int (*autoneg_enable)(struct cphy *); + int (*autoneg_disable)(struct cphy *); + int (*autoneg_restart)(struct cphy *); + + int (*advertise)(struct cphy *phy, unsigned int advertise_map); + int (*set_loopback)(struct cphy *, int on); + int (*set_speed_duplex)(struct cphy *phy, int speed, int duplex); + int (*get_link_status)(struct cphy *phy, int *link_ok, int *speed, + int *duplex, int *fc); +}; + +/* A PHY instance */ +struct cphy { + int addr; /* PHY address */ + adapter_t *adapter; /* associated adapter */ + struct cphy_ops *ops; /* PHY operations */ + int (*mdio_read)(adapter_t *adapter, int phy_addr, int mmd_addr, + int reg_addr, unsigned int *val); + int (*mdio_write)(adapter_t *adapter, int phy_addr, int mmd_addr, + int reg_addr, unsigned int val); + struct cphy_instance *instance; +}; + +/* Convenience MDIO read/write wrappers */ +static inline int mdio_read(struct cphy *cphy, int mmd, int reg, + unsigned int *valp) +{ + return cphy->mdio_read(cphy->adapter, cphy->addr, mmd, reg, valp); +} + +static inline int mdio_write(struct cphy *cphy, int mmd, int reg, + unsigned int val) +{ + return cphy->mdio_write(cphy->adapter, cphy->addr, mmd, reg, val); +} + +static inline int simple_mdio_read(struct cphy *cphy, int reg, + unsigned int *valp) +{ + return mdio_read(cphy, 0, reg, valp); +} + +static inline int simple_mdio_write(struct cphy *cphy, int reg, + unsigned int val) +{ + return mdio_write(cphy, 0, reg, val); +} + +/* Convenience initializer */ +static inline void cphy_init(struct cphy *phy, adapter_t *adapter, + int phy_addr, struct cphy_ops *phy_ops, + struct mdio_ops *mdio_ops) +{ + phy->adapter = adapter; + phy->addr = phy_addr; + phy->ops = phy_ops; + if (mdio_ops) { + phy->mdio_read = mdio_ops->read; + phy->mdio_write = mdio_ops->write; + } +} + +/* Operations of the PHY-instance factory */ +struct gphy { + /* Construct a PHY instance with the given PHY address */ + struct cphy *(*create)(adapter_t *adapter, int phy_addr, + struct mdio_ops *mdio_ops); + + /* + * Reset the PHY chip. This resets the whole PHY chip, not individual + * ports. + */ + int (*reset)(adapter_t *adapter); +}; + +extern struct gphy t1_my3126_ops; +extern struct gphy t1_mv88e1xxx_ops; +extern struct gphy t1_xpak_ops; +extern struct gphy t1_mv88x201x_ops; +extern struct gphy t1_dummy_phy_ops; +#endif diff --git a/drivers/net/chelsio/cpl5_cmd.h b/drivers/net/chelsio/cpl5_cmd.h new file mode 100644 index 00000000000..45e9248979f --- /dev/null +++ b/drivers/net/chelsio/cpl5_cmd.h @@ -0,0 +1,145 @@ +/***************************************************************************** + * * + * File: cpl5_cmd.h * + * $Revision: 1.4 $ * + * $Date: 2005/03/23 07:15:58 $ * + * Description: * + * part of the Chelsio 10Gb Ethernet Driver. * + * * + * This program is free software; you can redistribute it and/or modify * + * it under the terms of the GNU General Public License, version 2, as * + * published by the Free Software Foundation. * + * * + * You should have received a copy of the GNU General Public License along * + * with this program; if not, write to the Free Software Foundation, Inc., * + * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. * + * * + * THIS SOFTWARE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR IMPLIED * + * WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED WARRANTIES OF * + * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. * + * * + * http://www.chelsio.com * + * * + * Copyright (c) 2003 - 2005 Chelsio Communications, Inc. * + * All rights reserved. * + * * + * Maintainers: maintainers@chelsio.com * + * * + * Authors: Dimitrios Michailidis * + * Tina Yang * + * Felix Marti * + * Scott Bardone * + * Kurt Ottaway * + * Frank DiMambro * + * * + * History: * + * * + ****************************************************************************/ + +#ifndef _CPL5_CMD_H +#define _CPL5_CMD_H + +#include + +#if !defined(__LITTLE_ENDIAN_BITFIELD) && !defined(__BIG_ENDIAN_BITFIELD) +#error "Adjust your defines" +#endif + +enum CPL_opcode { + CPL_RX_PKT = 0xAD, + CPL_TX_PKT = 0xB2, + CPL_TX_PKT_LSO = 0xB6, +}; + +enum { /* TX_PKT_LSO ethernet types */ + CPL_ETH_II, + CPL_ETH_II_VLAN, + CPL_ETH_802_3, + CPL_ETH_802_3_VLAN +}; + +struct cpl_rx_data { + __u32 rsvd0; + __u32 len; + __u32 seq; + __u16 urg; + __u8 rsvd1; + __u8 status; +}; + +/* + * We want this header's alignment to be no more stringent than 2-byte aligned. + * All fields are u8 or u16 except for the length. However that field is not + * used so we break it into 2 16-bit parts to easily meet our alignment needs. + */ +struct cpl_tx_pkt { + __u8 opcode; +#if defined(__LITTLE_ENDIAN_BITFIELD) + __u8 iff:4; + __u8 ip_csum_dis:1; + __u8 l4_csum_dis:1; + __u8 vlan_valid:1; + __u8 rsvd:1; +#else + __u8 rsvd:1; + __u8 vlan_valid:1; + __u8 l4_csum_dis:1; + __u8 ip_csum_dis:1; + __u8 iff:4; +#endif + __u16 vlan; + __u16 len_hi; + __u16 len_lo; +}; + +struct cpl_tx_pkt_lso { + __u8 opcode; +#if defined(__LITTLE_ENDIAN_BITFIELD) + __u8 iff:4; + __u8 ip_csum_dis:1; + __u8 l4_csum_dis:1; + __u8 vlan_valid:1; + __u8 rsvd:1; +#else + __u8 rsvd:1; + __u8 vlan_valid:1; + __u8 l4_csum_dis:1; + __u8 ip_csum_dis:1; + __u8 iff:4; +#endif + __u16 vlan; + __u32 len; + + __u32 rsvd2; + __u8 rsvd3; +#if defined(__LITTLE_ENDIAN_BITFIELD) + __u8 tcp_hdr_words:4; + __u8 ip_hdr_words:4; +#else + __u8 ip_hdr_words:4; + __u8 tcp_hdr_words:4; +#endif + __u16 eth_type_mss; +}; + +struct cpl_rx_pkt { + __u8 opcode; +#if defined(__LITTLE_ENDIAN_BITFIELD) + __u8 iff:4; + __u8 csum_valid:1; + __u8 bad_pkt:1; + __u8 vlan_valid:1; + __u8 rsvd:1; +#else + __u8 rsvd:1; + __u8 vlan_valid:1; + __u8 bad_pkt:1; + __u8 csum_valid:1; + __u8 iff:4; +#endif + __u16 csum; + __u16 vlan; + __u16 len; +}; + +#endif diff --git a/drivers/net/chelsio/cxgb2.c b/drivers/net/chelsio/cxgb2.c new file mode 100644 index 00000000000..48c4d5acfcd --- /dev/null +++ b/drivers/net/chelsio/cxgb2.c @@ -0,0 +1,1231 @@ +/***************************************************************************** + * * + * File: cxgb2.c * + * $Revision: 1.11 $ * + * $Date: 2005/03/23 07:41:27 $ * + * Description: * + * Chelsio 10Gb Ethernet Driver. * + * * + * This program is free software; you can redistribute it and/or modify * + * it under the terms of the GNU General Public License, version 2, as * + * published by the Free Software Foundation. * + * * + * You should have received a copy of the GNU General Public License along * + * with this program; if not, write to the Free Software Foundation, Inc., * + * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. * + * * + * THIS SOFTWARE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR IMPLIED * + * WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED WARRANTIES OF * + * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. * + * * + * http://www.chelsio.com * + * * + * Copyright (c) 2003 - 2005 Chelsio Communications, Inc. * + * All rights reserved. * + * * + * Maintainers: maintainers@chelsio.com * + * * + * Authors: Dimitrios Michailidis * + * Tina Yang * + * Felix Marti * + * Scott Bardone * + * Kurt Ottaway * + * Frank DiMambro * + * * + * History: * + * * + ****************************************************************************/ + +#include "common.h" + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include "ch_ethtool.h" +#include "cpl5_cmd.h" +#include "regs.h" +#include "gmac.h" +#include "cphy.h" +#include "sge.h" +#include "tp.h" +#include "espi.h" + +static inline void schedule_mac_stats_update(struct adapter *ap, int secs) +{ + schedule_delayed_work(&ap->stats_update_task, secs * HZ); +} + +static inline void cancel_mac_stats_update(struct adapter *ap) +{ + cancel_delayed_work(&ap->stats_update_task); +} + +#if BITS_PER_LONG == 64 && !defined(CONFIG_X86_64) +# define FMT64 "l" +#else +# define FMT64 "ll" +#endif + +# define DRV_TYPE "" +# define MODULE_DESC "Chelsio Network Driver" + +static char driver_name[] = DRV_NAME; +static char driver_string[] = "Chelsio " DRV_TYPE "Network Driver"; +static char driver_version[] = "2.1.0"; + +#define PCI_DMA_64BIT ~0ULL +#define PCI_DMA_32BIT 0xffffffffULL + +#define MAX_CMDQ_ENTRIES 16384 +#define MAX_CMDQ1_ENTRIES 1024 +#define MAX_RX_BUFFERS 16384 +#define MAX_RX_JUMBO_BUFFERS 16384 +#define MAX_TX_BUFFERS_HIGH 16384U +#define MAX_TX_BUFFERS_LOW 1536U +#define MIN_FL_ENTRIES 32 + +#define PORT_MASK ((1 << MAX_NPORTS) - 1) + +#define DFLT_MSG_ENABLE (NETIF_MSG_DRV | NETIF_MSG_PROBE | NETIF_MSG_LINK | \ + NETIF_MSG_TIMER | NETIF_MSG_IFDOWN | NETIF_MSG_IFUP |\ + NETIF_MSG_RX_ERR | NETIF_MSG_TX_ERR) + +/* + * The EEPROM is actually bigger but only the first few bytes are used so we + * only report those. + */ +#define EEPROM_SIZE 32 + +MODULE_DESCRIPTION(MODULE_DESC); +MODULE_AUTHOR("Chelsio Communications"); +MODULE_LICENSE("GPL"); +MODULE_DEVICE_TABLE(pci, t1_pci_tbl); + +static int dflt_msg_enable = DFLT_MSG_ENABLE; + +MODULE_PARM(dflt_msg_enable, "i"); +MODULE_PARM_DESC(dflt_msg_enable, "Chelsio T1 message enable bitmap"); + + +static const char pci_speed[][4] = { + "33", "66", "100", "133" +}; + +/* + * Setup MAC to receive the types of packets we want. + */ +static void t1_set_rxmode(struct net_device *dev) +{ + struct adapter *adapter = dev->priv; + struct cmac *mac = adapter->port[dev->if_port].mac; + struct t1_rx_mode rm; + + rm.dev = dev; + rm.idx = 0; + rm.list = dev->mc_list; + mac->ops->set_rx_mode(mac, &rm); +} + +static void link_report(struct port_info *p) +{ + if (!netif_carrier_ok(p->dev)) + printk(KERN_INFO "%s: link is down\n", p->dev->name); + else { + const char *s = "10 Mbps"; + + switch (p->link_config.speed) { + case SPEED_10000: s = "10 Gbps"; break; + case SPEED_1000: s = "1000 Mbps"; break; + case SPEED_100: s = "100 Mbps"; break; + } + + printk(KERN_INFO "%s: link is up at %s, %s duplex\n", + p->dev->name, s, + p->link_config.duplex == DUPLEX_FULL ? "full" : "half"); + } +} + +void t1_link_changed(struct adapter *adapter, int port_id, int link_stat, + int speed, int duplex, int pause) +{ + struct port_info *p = &adapter->port[port_id]; + + if (link_stat != netif_carrier_ok(p->dev)) { + if (link_stat) + netif_carrier_on(p->dev); + else + netif_carrier_off(p->dev); + link_report(p); + + } +} + +static void link_start(struct port_info *p) +{ + struct cmac *mac = p->mac; + + mac->ops->reset(mac); + if (mac->ops->macaddress_set) + mac->ops->macaddress_set(mac, p->dev->dev_addr); + t1_set_rxmode(p->dev); + t1_link_start(p->phy, mac, &p->link_config); + mac->ops->enable(mac, MAC_DIRECTION_RX | MAC_DIRECTION_TX); +} + +static void enable_hw_csum(struct adapter *adapter) +{ + if (adapter->flags & TSO_CAPABLE) + t1_tp_set_ip_checksum_offload(adapter->tp, 1); /* for TSO only */ + if (adapter->flags & UDP_CSUM_CAPABLE) + t1_tp_set_udp_checksum_offload(adapter->tp, 1); + t1_tp_set_tcp_checksum_offload(adapter->tp, 1); +} + +/* + * Things to do upon first use of a card. + * This must run with the rtnl lock held. + */ +static int cxgb_up(struct adapter *adapter) +{ + int err = 0; + + if (!(adapter->flags & FULL_INIT_DONE)) { + err = t1_init_hw_modules(adapter); + if (err) + goto out_err; + + enable_hw_csum(adapter); + adapter->flags |= FULL_INIT_DONE; + } + + t1_interrupts_clear(adapter); + + if ((err = request_irq(adapter->pdev->irq, &t1_interrupt, SA_SHIRQ, + adapter->name, adapter))) + goto out_err; + + t1_sge_start(adapter->sge); + t1_interrupts_enable(adapter); + + err = 0; + out_err: + return err; +} + +/* + * Release resources when all the ports have been stopped. + */ +static void cxgb_down(struct adapter *adapter) +{ + t1_sge_stop(adapter->sge); + t1_interrupts_disable(adapter); + free_irq(adapter->pdev->irq, adapter); +} + +static int cxgb_open(struct net_device *dev) +{ + int err; + struct adapter *adapter = dev->priv; + int other_ports = adapter->open_device_map & PORT_MASK; + + if (!adapter->open_device_map && (err = cxgb_up(adapter)) < 0) + return err; + + __set_bit(dev->if_port, &adapter->open_device_map); + link_start(&adapter->port[dev->if_port]); + netif_start_queue(dev); + if (!other_ports && adapter->params.stats_update_period) + schedule_mac_stats_update(adapter, + adapter->params.stats_update_period); + return 0; +} + +static int cxgb_close(struct net_device *dev) +{ + struct adapter *adapter = dev->priv; + struct port_info *p = &adapter->port[dev->if_port]; + struct cmac *mac = p->mac; + + netif_stop_queue(dev); + mac->ops->disable(mac, MAC_DIRECTION_TX | MAC_DIRECTION_RX); + netif_carrier_off(dev); + + clear_bit(dev->if_port, &adapter->open_device_map); + if (adapter->params.stats_update_period && + !(adapter->open_device_map & PORT_MASK)) { + /* Stop statistics accumulation. */ + smp_mb__after_clear_bit(); + spin_lock(&adapter->work_lock); /* sync with update task */ + spin_unlock(&adapter->work_lock); + cancel_mac_stats_update(adapter); + } + + if (!adapter->open_device_map) + cxgb_down(adapter); + return 0; +} + +static struct net_device_stats *t1_get_stats(struct net_device *dev) +{ + struct adapter *adapter = dev->priv; + struct port_info *p = &adapter->port[dev->if_port]; + struct net_device_stats *ns = &p->netstats; + const struct cmac_statistics *pstats; + + /* Do a full update of the MAC stats */ + pstats = p->mac->ops->statistics_update(p->mac, + MAC_STATS_UPDATE_FULL); + + ns->tx_packets = pstats->TxUnicastFramesOK + + pstats->TxMulticastFramesOK + pstats->TxBroadcastFramesOK; + + ns->rx_packets = pstats->RxUnicastFramesOK + + pstats->RxMulticastFramesOK + pstats->RxBroadcastFramesOK; + + ns->tx_bytes = pstats->TxOctetsOK; + ns->rx_bytes = pstats->RxOctetsOK; + + ns->tx_errors = pstats->TxLateCollisions + pstats->TxLengthErrors + + pstats->TxUnderrun + pstats->TxFramesAbortedDueToXSCollisions; + ns->rx_errors = pstats->RxDataErrors + pstats->RxJabberErrors + + pstats->RxFCSErrors + pstats->RxAlignErrors + + pstats->RxSequenceErrors + pstats->RxFrameTooLongErrors + + pstats->RxSymbolErrors + pstats->RxRuntErrors; + + ns->multicast = pstats->RxMulticastFramesOK; + ns->collisions = pstats->TxTotalCollisions; + + /* detailed rx_errors */ + ns->rx_length_errors = pstats->RxFrameTooLongErrors + + pstats->RxJabberErrors; + ns->rx_over_errors = 0; + ns->rx_crc_errors = pstats->RxFCSErrors; + ns->rx_frame_errors = pstats->RxAlignErrors; + ns->rx_fifo_errors = 0; + ns->rx_missed_errors = 0; + + /* detailed tx_errors */ + ns->tx_aborted_errors = pstats->TxFramesAbortedDueToXSCollisions; + ns->tx_carrier_errors = 0; + ns->tx_fifo_errors = pstats->TxUnderrun; + ns->tx_heartbeat_errors = 0; + ns->tx_window_errors = pstats->TxLateCollisions; + return ns; +} + +static u32 get_msglevel(struct net_device *dev) +{ + struct adapter *adapter = dev->priv; + + return adapter->msg_enable; +} + +static void set_msglevel(struct net_device *dev, u32 val) +{ + struct adapter *adapter = dev->priv; + + adapter->msg_enable = val; +} + +static char stats_strings[][ETH_GSTRING_LEN] = { + "TxOctetsOK", + "TxOctetsBad", + "TxUnicastFramesOK", + "TxMulticastFramesOK", + "TxBroadcastFramesOK", + "TxPauseFrames", + "TxFramesWithDeferredXmissions", + "TxLateCollisions", + "TxTotalCollisions", + "TxFramesAbortedDueToXSCollisions", + "TxUnderrun", + "TxLengthErrors", + "TxInternalMACXmitError", + "TxFramesWithExcessiveDeferral", + "TxFCSErrors", + + "RxOctetsOK", + "RxOctetsBad", + "RxUnicastFramesOK", + "RxMulticastFramesOK", + "RxBroadcastFramesOK", + "RxPauseFrames", + "RxFCSErrors", + "RxAlignErrors", + "RxSymbolErrors", + "RxDataErrors", + "RxSequenceErrors", + "RxRuntErrors", + "RxJabberErrors", + "RxInternalMACRcvError", + "RxInRangeLengthErrors", + "RxOutOfRangeLengthField", + "RxFrameTooLongErrors" +}; + +static void get_drvinfo(struct net_device *dev, struct ethtool_drvinfo *info) +{ + struct adapter *adapter = dev->priv; + + strcpy(info->driver, driver_name); + strcpy(info->version, driver_version); + strcpy(info->fw_version, "N/A"); + strcpy(info->bus_info, pci_name(adapter->pdev)); +} + +static int get_stats_count(struct net_device *dev) +{ + return ARRAY_SIZE(stats_strings); +} + +static void get_strings(struct net_device *dev, u32 stringset, u8 *data) +{ + if (stringset == ETH_SS_STATS) + memcpy(data, stats_strings, sizeof(stats_strings)); +} + +static void get_stats(struct net_device *dev, struct ethtool_stats *stats, + u64 *data) +{ + struct adapter *adapter = dev->priv; + struct cmac *mac = adapter->port[dev->if_port].mac; + const struct cmac_statistics *s; + + s = mac->ops->statistics_update(mac, MAC_STATS_UPDATE_FULL); + + *data++ = s->TxOctetsOK; + *data++ = s->TxOctetsBad; + *data++ = s->TxUnicastFramesOK; + *data++ = s->TxMulticastFramesOK; + *data++ = s->TxBroadcastFramesOK; + *data++ = s->TxPauseFrames; + *data++ = s->TxFramesWithDeferredXmissions; + *data++ = s->TxLateCollisions; + *data++ = s->TxTotalCollisions; + *data++ = s->TxFramesAbortedDueToXSCollisions; + *data++ = s->TxUnderrun; + *data++ = s->TxLengthErrors; + *data++ = s->TxInternalMACXmitError; + *data++ = s->TxFramesWithExcessiveDeferral; + *data++ = s->TxFCSErrors; + + *data++ = s->RxOctetsOK; + *data++ = s->RxOctetsBad; + *data++ = s->RxUnicastFramesOK; + *data++ = s->RxMulticastFramesOK; + *data++ = s->RxBroadcastFramesOK; + *data++ = s->RxPauseFrames; + *data++ = s->RxFCSErrors; + *data++ = s->RxAlignErrors; + *data++ = s->RxSymbolErrors; + *data++ = s->RxDataErrors; + *data++ = s->RxSequenceErrors; + *data++ = s->RxRuntErrors; + *data++ = s->RxJabberErrors; + *data++ = s->RxInternalMACRcvError; + *data++ = s->RxInRangeLengthErrors; + *data++ = s->RxOutOfRangeLengthField; + *data++ = s->RxFrameTooLongErrors; +} + +static int get_settings(struct net_device *dev, struct ethtool_cmd *cmd) +{ + struct adapter *adapter = dev->priv; + struct port_info *p = &adapter->port[dev->if_port]; + + cmd->supported = p->link_config.supported; + cmd->advertising = p->link_config.advertising; + + if (netif_carrier_ok(dev)) { + cmd->speed = p->link_config.speed; + cmd->duplex = p->link_config.duplex; + } else { + cmd->speed = -1; + cmd->duplex = -1; + } + + cmd->port = (cmd->supported & SUPPORTED_TP) ? PORT_TP : PORT_FIBRE; + cmd->phy_address = p->phy->addr; + cmd->transceiver = XCVR_EXTERNAL; + cmd->autoneg = p->link_config.autoneg; + cmd->maxtxpkt = 0; + cmd->maxrxpkt = 0; + return 0; +} + +static int speed_duplex_to_caps(int speed, int duplex) +{ + int cap = 0; + + switch (speed) { + case SPEED_10: + if (duplex == DUPLEX_FULL) + cap = SUPPORTED_10baseT_Full; + else + cap = SUPPORTED_10baseT_Half; + break; + case SPEED_100: + if (duplex == DUPLEX_FULL) + cap = SUPPORTED_100baseT_Full; + else + cap = SUPPORTED_100baseT_Half; + break; + case SPEED_1000: + if (duplex == DUPLEX_FULL) + cap = SUPPORTED_1000baseT_Full; + else + cap = SUPPORTED_1000baseT_Half; + break; + case SPEED_10000: + if (duplex == DUPLEX_FULL) + cap = SUPPORTED_10000baseT_Full; + } + return cap; +} + +#define ADVERTISED_MASK (ADVERTISED_10baseT_Half | ADVERTISED_10baseT_Full | \ + ADVERTISED_100baseT_Half | ADVERTISED_100baseT_Full | \ + ADVERTISED_1000baseT_Half | ADVERTISED_1000baseT_Full | \ + ADVERTISED_10000baseT_Full) + +static int set_settings(struct net_device *dev, struct ethtool_cmd *cmd) +{ + struct adapter *adapter = dev->priv; + struct port_info *p = &adapter->port[dev->if_port]; + struct link_config *lc = &p->link_config; + + if (!(lc->supported & SUPPORTED_Autoneg)) + return -EOPNOTSUPP; /* can't change speed/duplex */ + + if (cmd->autoneg == AUTONEG_DISABLE) { + int cap = speed_duplex_to_caps(cmd->speed, cmd->duplex); + + if (!(lc->supported & cap) || cmd->speed == SPEED_1000) + return -EINVAL; + lc->requested_speed = cmd->speed; + lc->requested_duplex = cmd->duplex; + lc->advertising = 0; + } else { + cmd->advertising &= ADVERTISED_MASK; + if (cmd->advertising & (cmd->advertising - 1)) + cmd->advertising = lc->supported; + cmd->advertising &= lc->supported; + if (!cmd->advertising) + return -EINVAL; + lc->requested_speed = SPEED_INVALID; + lc->requested_duplex = DUPLEX_INVALID; + lc->advertising = cmd->advertising | ADVERTISED_Autoneg; + } + lc->autoneg = cmd->autoneg; + if (netif_running(dev)) + t1_link_start(p->phy, p->mac, lc); + return 0; +} + +static void get_pauseparam(struct net_device *dev, + struct ethtool_pauseparam *epause) +{ + struct adapter *adapter = dev->priv; + struct port_info *p = &adapter->port[dev->if_port]; + + epause->autoneg = (p->link_config.requested_fc & PAUSE_AUTONEG) != 0; + epause->rx_pause = (p->link_config.fc & PAUSE_RX) != 0; + epause->tx_pause = (p->link_config.fc & PAUSE_TX) != 0; +} + +static int set_pauseparam(struct net_device *dev, + struct ethtool_pauseparam *epause) +{ + struct adapter *adapter = dev->priv; + struct port_info *p = &adapter->port[dev->if_port]; + struct link_config *lc = &p->link_config; + + if (epause->autoneg == AUTONEG_DISABLE) + lc->requested_fc = 0; + else if (lc->supported & SUPPORTED_Autoneg) + lc->requested_fc = PAUSE_AUTONEG; + else + return -EINVAL; + + if (epause->rx_pause) + lc->requested_fc |= PAUSE_RX; + if (epause->tx_pause) + lc->requested_fc |= PAUSE_TX; + if (lc->autoneg == AUTONEG_ENABLE) { + if (netif_running(dev)) + t1_link_start(p->phy, p->mac, lc); + } else { + lc->fc = lc->requested_fc & (PAUSE_RX | PAUSE_TX); + if (netif_running(dev)) + p->mac->ops->set_speed_duplex_fc(p->mac, -1, -1, + lc->fc); + } + return 0; +} + +static u32 get_rx_csum(struct net_device *dev) +{ + struct adapter *adapter = dev->priv; + + return (adapter->flags & RX_CSUM_ENABLED) != 0; +} + +static int set_rx_csum(struct net_device *dev, u32 data) +{ + struct adapter *adapter = dev->priv; + + if (data) + adapter->flags |= RX_CSUM_ENABLED; + else + adapter->flags &= ~RX_CSUM_ENABLED; + return 0; +} + +static int set_tso(struct net_device *dev, u32 value) +{ + struct adapter *adapter = dev->priv; + + if (!(adapter->flags & TSO_CAPABLE)) + return value ? -EOPNOTSUPP : 0; + return ethtool_op_set_tso(dev, value); +} + +static void get_sge_param(struct net_device *dev, struct ethtool_ringparam *e) +{ + struct adapter *adapter = dev->priv; + int jumbo_fl = t1_is_T1B(adapter) ? 1 : 0; + + e->rx_max_pending = MAX_RX_BUFFERS; + e->rx_mini_max_pending = 0; + e->rx_jumbo_max_pending = MAX_RX_JUMBO_BUFFERS; + e->tx_max_pending = MAX_CMDQ_ENTRIES; + + e->rx_pending = adapter->params.sge.freelQ_size[!jumbo_fl]; + e->rx_mini_pending = 0; + e->rx_jumbo_pending = adapter->params.sge.freelQ_size[jumbo_fl]; + e->tx_pending = adapter->params.sge.cmdQ_size[0]; +} + +static int set_sge_param(struct net_device *dev, struct ethtool_ringparam *e) +{ + struct adapter *adapter = dev->priv; + int jumbo_fl = t1_is_T1B(adapter) ? 1 : 0; + + if (e->rx_pending > MAX_RX_BUFFERS || e->rx_mini_pending || + e->rx_jumbo_pending > MAX_RX_JUMBO_BUFFERS || + e->tx_pending > MAX_CMDQ_ENTRIES || + e->rx_pending < MIN_FL_ENTRIES || + e->rx_jumbo_pending < MIN_FL_ENTRIES || + e->tx_pending < (adapter->params.nports + 1) * (MAX_SKB_FRAGS + 1)) + return -EINVAL; + + if (adapter->flags & FULL_INIT_DONE) + return -EBUSY; + + adapter->params.sge.freelQ_size[!jumbo_fl] = e->rx_pending; + adapter->params.sge.freelQ_size[jumbo_fl] = e->rx_jumbo_pending; + adapter->params.sge.cmdQ_size[0] = e->tx_pending; + adapter->params.sge.cmdQ_size[1] = e->tx_pending > MAX_CMDQ1_ENTRIES ? + MAX_CMDQ1_ENTRIES : e->tx_pending; + return 0; +} + +static int set_coalesce(struct net_device *dev, struct ethtool_coalesce *c) +{ + struct adapter *adapter = dev->priv; + + unsigned int sge_coalesce_usecs = 0; + + sge_coalesce_usecs = adapter->params.sge.last_rx_coalesce_raw; + sge_coalesce_usecs /= board_info(adapter)->clock_core / 1000000; + if ( (adapter->params.sge.coalesce_enable && !c->use_adaptive_rx_coalesce) && + (c->rx_coalesce_usecs == sge_coalesce_usecs) ) { + adapter->params.sge.rx_coalesce_usecs = + adapter->params.sge.default_rx_coalesce_usecs; + } else { + adapter->params.sge.rx_coalesce_usecs = c->rx_coalesce_usecs; + } + + adapter->params.sge.last_rx_coalesce_raw = adapter->params.sge.rx_coalesce_usecs; + adapter->params.sge.last_rx_coalesce_raw *= (board_info(adapter)->clock_core / 1000000); + adapter->params.sge.sample_interval_usecs = c->rate_sample_interval; + adapter->params.sge.coalesce_enable = c->use_adaptive_rx_coalesce; + t1_sge_set_coalesce_params(adapter->sge, &adapter->params.sge); + return 0; +} + +static int get_coalesce(struct net_device *dev, struct ethtool_coalesce *c) +{ + struct adapter *adapter = dev->priv; + + if (adapter->params.sge.coalesce_enable) { /* Adaptive algorithm on */ + c->rx_coalesce_usecs = adapter->params.sge.last_rx_coalesce_raw; + c->rx_coalesce_usecs /= board_info(adapter)->clock_core / 1000000; + } else { + c->rx_coalesce_usecs = adapter->params.sge.rx_coalesce_usecs; + } + c->rate_sample_interval = adapter->params.sge.sample_interval_usecs; + c->use_adaptive_rx_coalesce = adapter->params.sge.coalesce_enable; + return 0; +} + +static int get_eeprom_len(struct net_device *dev) +{ + struct adapter *adapter = dev->priv; + + return t1_is_asic(adapter) ? EEPROM_SIZE : 0; +} + +#define EEPROM_MAGIC(ap) \ + (PCI_VENDOR_ID_CHELSIO | ((ap)->params.chip_version << 16)) + +static int get_eeprom(struct net_device *dev, struct ethtool_eeprom *e, + u8 *data) +{ + int i; + u8 buf[EEPROM_SIZE] __attribute__((aligned(4))); + struct adapter *adapter = dev->priv; + + e->magic = EEPROM_MAGIC(adapter); + for (i = e->offset & ~3; i < e->offset + e->len; i += sizeof(u32)) + t1_seeprom_read(adapter, i, (u32 *)&buf[i]); + memcpy(data, buf + e->offset, e->len); + return 0; +} + +static struct ethtool_ops t1_ethtool_ops = { + .get_settings = get_settings, + .set_settings = set_settings, + .get_drvinfo = get_drvinfo, + .get_msglevel = get_msglevel, + .set_msglevel = set_msglevel, + .get_ringparam = get_sge_param, + .set_ringparam = set_sge_param, + .get_coalesce = get_coalesce, + .set_coalesce = set_coalesce, + .get_eeprom_len = get_eeprom_len, + .get_eeprom = get_eeprom, + .get_pauseparam = get_pauseparam, + .set_pauseparam = set_pauseparam, + .get_rx_csum = get_rx_csum, + .set_rx_csum = set_rx_csum, + .get_tx_csum = ethtool_op_get_tx_csum, + .set_tx_csum = ethtool_op_set_tx_csum, + .get_sg = ethtool_op_get_sg, + .set_sg = ethtool_op_set_sg, + .get_link = ethtool_op_get_link, + .get_strings = get_strings, + .get_stats_count = get_stats_count, + .get_ethtool_stats = get_stats, + .get_tso = ethtool_op_get_tso, + .set_tso = set_tso, +}; + +static int ethtool_ioctl(struct net_device *dev, void *useraddr) +{ + u32 cmd; + struct adapter *adapter = dev->priv; + + if (copy_from_user(&cmd, useraddr, sizeof(cmd))) + return -EFAULT; + + switch (cmd) { + case ETHTOOL_SETREG: { + struct ethtool_reg edata; + + if (!capable(CAP_NET_ADMIN)) + return -EPERM; + if (copy_from_user(&edata, useraddr, sizeof(edata))) + return -EFAULT; + if ((edata.addr & 3) != 0 || edata.addr >= adapter->mmio_len) + return -EINVAL; + if (edata.addr == A_ESPI_MISC_CONTROL) + t1_espi_set_misc_ctrl(adapter, edata.val); + else { + if (edata.addr == 0x950) + t1_sge_set_ptimeout(adapter, edata.val); + else + writel(edata.val, adapter->regs + edata.addr); + } + break; + } + case ETHTOOL_GETREG: { + struct ethtool_reg edata; + + if (copy_from_user(&edata, useraddr, sizeof(edata))) + return -EFAULT; + if ((edata.addr & 3) != 0 || edata.addr >= adapter->mmio_len) + return -EINVAL; + if (edata.addr >= 0x900 && edata.addr <= 0x93c) + edata.val = t1_espi_get_mon(adapter, edata.addr, 1); + else { + if (edata.addr == 0x950) + edata.val = t1_sge_get_ptimeout(adapter); + else + edata.val = readl(adapter->regs + edata.addr); + } + if (copy_to_user(useraddr, &edata, sizeof(edata))) + return -EFAULT; + break; + } + case ETHTOOL_SETTPI: { + struct ethtool_reg edata; + + if (!capable(CAP_NET_ADMIN)) + return -EPERM; + if (copy_from_user(&edata, useraddr, sizeof(edata))) + return -EFAULT; + if ((edata.addr & 3) != 0) + return -EINVAL; + t1_tpi_write(adapter, edata.addr, edata.val); + break; + } + case ETHTOOL_GETTPI: { + struct ethtool_reg edata; + + if (copy_from_user(&edata, useraddr, sizeof(edata))) + return -EFAULT; + if ((edata.addr & 3) != 0) + return -EINVAL; + t1_tpi_read(adapter, edata.addr, &edata.val); + if (copy_to_user(useraddr, &edata, sizeof(edata))) + return -EFAULT; + break; + } + default: + return -EOPNOTSUPP; + } + return 0; +} + +static int t1_ioctl(struct net_device *dev, struct ifreq *req, int cmd) +{ + struct adapter *adapter = dev->priv; + struct mii_ioctl_data *data = (struct mii_ioctl_data *)&req->ifr_data; + + switch (cmd) { + case SIOCGMIIPHY: + data->phy_id = adapter->port[dev->if_port].phy->addr; + /* FALLTHRU */ + case SIOCGMIIREG: { + struct cphy *phy = adapter->port[dev->if_port].phy; + u32 val; + + if (!phy->mdio_read) return -EOPNOTSUPP; + phy->mdio_read(adapter, data->phy_id, 0, data->reg_num & 0x1f, + &val); + data->val_out = val; + break; + } + case SIOCSMIIREG: { + struct cphy *phy = adapter->port[dev->if_port].phy; + + if (!capable(CAP_NET_ADMIN)) return -EPERM; + if (!phy->mdio_write) return -EOPNOTSUPP; + phy->mdio_write(adapter, data->phy_id, 0, data->reg_num & 0x1f, + data->val_in); + break; + } + + case SIOCCHETHTOOL: + return ethtool_ioctl(dev, (void *)req->ifr_data); + default: + return -EOPNOTSUPP; + } + return 0; +} + +static int t1_change_mtu(struct net_device *dev, int new_mtu) +{ + int ret; + struct adapter *adapter = dev->priv; + struct cmac *mac = adapter->port[dev->if_port].mac; + + if (!mac->ops->set_mtu) + return -EOPNOTSUPP; + if (new_mtu < 68) + return -EINVAL; + if ((ret = mac->ops->set_mtu(mac, new_mtu))) + return ret; + dev->mtu = new_mtu; + return 0; +} + +static int t1_set_mac_addr(struct net_device *dev, void *p) +{ + struct adapter *adapter = dev->priv; + struct cmac *mac = adapter->port[dev->if_port].mac; + struct sockaddr *addr = p; + + if (!mac->ops->macaddress_set) + return -EOPNOTSUPP; + + memcpy(dev->dev_addr, addr->sa_data, dev->addr_len); + mac->ops->macaddress_set(mac, dev->dev_addr); + return 0; +} + +#if defined(CONFIG_VLAN_8021Q) || defined(CONFIG_VLAN_8021Q_MODULE) +static void vlan_rx_register(struct net_device *dev, + struct vlan_group *grp) +{ + struct adapter *adapter = dev->priv; + + spin_lock_irq(&adapter->async_lock); + adapter->vlan_grp = grp; + t1_set_vlan_accel(adapter, grp != NULL); + spin_unlock_irq(&adapter->async_lock); +} + +static void vlan_rx_kill_vid(struct net_device *dev, unsigned short vid) +{ + struct adapter *adapter = dev->priv; + + spin_lock_irq(&adapter->async_lock); + if (adapter->vlan_grp) + adapter->vlan_grp->vlan_devices[vid] = NULL; + spin_unlock_irq(&adapter->async_lock); +} +#endif + +#ifdef CONFIG_NET_POLL_CONTROLLER +static void t1_netpoll(struct net_device *dev) +{ + struct adapter *adapter = dev->priv; + + t1_interrupt(adapter->pdev->irq, adapter, NULL); +} +#endif + +/* + * Periodic accumulation of MAC statistics. This is used only if the MAC + * does not have any other way to prevent stats counter overflow. + */ +static void mac_stats_task(void *data) +{ + int i; + struct adapter *adapter = data; + + for_each_port(adapter, i) { + struct port_info *p = &adapter->port[i]; + + if (netif_running(p->dev)) + p->mac->ops->statistics_update(p->mac, + MAC_STATS_UPDATE_FAST); + } + + /* Schedule the next statistics update if any port is active. */ + spin_lock(&adapter->work_lock); + if (adapter->open_device_map & PORT_MASK) + schedule_mac_stats_update(adapter, + adapter->params.stats_update_period); + spin_unlock(&adapter->work_lock); +} + +/* + * Processes elmer0 external interrupts in process context. + */ +static void ext_intr_task(void *data) +{ + u32 enable; + struct adapter *adapter = data; + + elmer0_ext_intr_handler(adapter); + + /* Now reenable external interrupts */ + t1_write_reg_4(adapter, A_PL_CAUSE, F_PL_INTR_EXT); + enable = t1_read_reg_4(adapter, A_PL_ENABLE); + t1_write_reg_4(adapter, A_PL_ENABLE, enable | F_PL_INTR_EXT); + adapter->slow_intr_mask |= F_PL_INTR_EXT; +} + +/* + * Interrupt-context handler for elmer0 external interrupts. + */ +void t1_elmer0_ext_intr(struct adapter *adapter) +{ + u32 enable = t1_read_reg_4(adapter, A_PL_ENABLE); + + /* + * Schedule a task to handle external interrupts as we require + * a process context. We disable EXT interrupts in the interim + * and let the task reenable them when it's done. + */ + adapter->slow_intr_mask &= ~F_PL_INTR_EXT; + t1_write_reg_4(adapter, A_PL_ENABLE, enable & ~F_PL_INTR_EXT); + schedule_work(&adapter->ext_intr_handler_task); +} + +void t1_fatal_err(struct adapter *adapter) +{ + if (adapter->flags & FULL_INIT_DONE) { + t1_sge_stop(adapter->sge); + t1_interrupts_disable(adapter); + } + CH_ALERT("%s: encountered fatal error, operation suspended\n", + adapter->name); +} + + +static int __devinit init_one(struct pci_dev *pdev, + const struct pci_device_id *ent) +{ + static int version_printed; + + int i, err, pci_using_dac = 0; + unsigned long mmio_start, mmio_len; + const struct board_info *bi; + struct adapter *adapter = NULL; + struct port_info *pi; + + if (!version_printed) { + printk(KERN_INFO "%s - version %s\n", driver_string, + driver_version); + ++version_printed; + } + + err = pci_enable_device(pdev); + if (err) + return err; + + if (!(pci_resource_flags(pdev, 0) & IORESOURCE_MEM)) { + CH_ERR("%s: cannot find PCI device memory base address\n", + pci_name(pdev)); + err = -ENODEV; + goto out_disable_pdev; + } + + if (!pci_set_dma_mask(pdev, PCI_DMA_64BIT)) { + pci_using_dac = 1; + if (pci_set_consistent_dma_mask(pdev, PCI_DMA_64BIT)) { + CH_ERR("%s: unable to obtain 64-bit DMA for" + "consistent allocations\n", pci_name(pdev)); + err = -ENODEV; + goto out_disable_pdev; + } + } else if ((err = pci_set_dma_mask(pdev, PCI_DMA_32BIT)) != 0) { + CH_ERR("%s: no usable DMA configuration\n", pci_name(pdev)); + goto out_disable_pdev; + } + + err = pci_request_regions(pdev, driver_name); + if (err) { + CH_ERR("%s: cannot obtain PCI resources\n", pci_name(pdev)); + goto out_disable_pdev; + } + + pci_set_master(pdev); + + mmio_start = pci_resource_start(pdev, 0); + mmio_len = pci_resource_len(pdev, 0); + bi = t1_get_board_info(ent->driver_data); + + for (i = 0; i < bi->port_number; ++i) { + struct net_device *netdev; + + netdev = alloc_etherdev(adapter ? 0 : sizeof(*adapter)); + if (!netdev) { + err = -ENOMEM; + goto out_free_dev; + } + + SET_MODULE_OWNER(netdev); + SET_NETDEV_DEV(netdev, &pdev->dev); + + if (!adapter) { + adapter = netdev->priv; + adapter->pdev = pdev; + adapter->port[0].dev = netdev; /* so we don't leak it */ + + adapter->regs = ioremap(mmio_start, mmio_len); + if (!adapter->regs) { + CH_ERR("%s: cannot map device registers\n", + pci_name(pdev)); + err = -ENOMEM; + goto out_free_dev; + } + + if (t1_get_board_rev(adapter, bi, &adapter->params)) { + err = -ENODEV; /* Can't handle this chip rev */ + goto out_free_dev; + } + + adapter->name = pci_name(pdev); + adapter->msg_enable = dflt_msg_enable; + adapter->mmio_len = mmio_len; + + init_MUTEX(&adapter->mib_mutex); + spin_lock_init(&adapter->tpi_lock); + spin_lock_init(&adapter->work_lock); + spin_lock_init(&adapter->async_lock); + + INIT_WORK(&adapter->ext_intr_handler_task, + ext_intr_task, adapter); + INIT_WORK(&adapter->stats_update_task, mac_stats_task, + adapter); + + pci_set_drvdata(pdev, netdev); + + } + + pi = &adapter->port[i]; + pi->dev = netdev; + netif_carrier_off(netdev); + netdev->irq = pdev->irq; + netdev->if_port = i; + netdev->mem_start = mmio_start; + netdev->mem_end = mmio_start + mmio_len - 1; + netdev->priv = adapter; + netdev->features |= NETIF_F_SG | NETIF_F_IP_CSUM; + adapter->flags |= RX_CSUM_ENABLED | TCP_CSUM_CAPABLE; + if (pci_using_dac) + netdev->features |= NETIF_F_HIGHDMA; + if (vlan_tso_capable(adapter)) { + adapter->flags |= UDP_CSUM_CAPABLE; +#if defined(CONFIG_VLAN_8021Q) || defined(CONFIG_VLAN_8021Q_MODULE) + adapter->flags |= VLAN_ACCEL_CAPABLE; + netdev->features |= + NETIF_F_HW_VLAN_TX | NETIF_F_HW_VLAN_RX; + netdev->vlan_rx_register = vlan_rx_register; + netdev->vlan_rx_kill_vid = vlan_rx_kill_vid; +#endif + adapter->flags |= TSO_CAPABLE; + netdev->features |= NETIF_F_TSO; + } + + netdev->open = cxgb_open; + netdev->stop = cxgb_close; + netdev->hard_start_xmit = t1_start_xmit; + netdev->hard_header_len += (adapter->flags & TSO_CAPABLE) ? + sizeof(struct cpl_tx_pkt_lso) : + sizeof(struct cpl_tx_pkt); + netdev->get_stats = t1_get_stats; + netdev->set_multicast_list = t1_set_rxmode; + netdev->do_ioctl = t1_ioctl; + netdev->change_mtu = t1_change_mtu; + netdev->set_mac_address = t1_set_mac_addr; +#ifdef CONFIG_NET_POLL_CONTROLLER + netdev->poll_controller = t1_netpoll; +#endif + netdev->weight = 64; + + SET_ETHTOOL_OPS(netdev, &t1_ethtool_ops); + } + + if (t1_init_sw_modules(adapter, bi) < 0) { + err = -ENODEV; + goto out_free_dev; + } + + /* + * The card is now ready to go. If any errors occur during device + * registration we do not fail the whole card but rather proceed only + * with the ports we manage to register successfully. However we must + * register at least one net device. + */ + for (i = 0; i < bi->port_number; ++i) { + err = register_netdev(adapter->port[i].dev); + if (err) + CH_WARN("%s: cannot register net device %s, skipping\n", + pci_name(pdev), adapter->port[i].dev->name); + else { + /* + * Change the name we use for messages to the name of + * the first successfully registered interface. + */ + if (!adapter->registered_device_map) + adapter->name = adapter->port[i].dev->name; + + __set_bit(i, &adapter->registered_device_map); + } + } + if (!adapter->registered_device_map) { + CH_ERR("%s: could not register any net devices\n", + pci_name(pdev)); + goto out_release_adapter_res; + } + + printk(KERN_INFO "%s: %s (rev %d), %s %dMHz/%d-bit\n", adapter->name, + bi->desc, adapter->params.chip_revision, + adapter->params.pci.is_pcix ? "PCIX" : "PCI", + adapter->params.pci.speed, adapter->params.pci.width); + return 0; + + out_release_adapter_res: + t1_free_sw_modules(adapter); + out_free_dev: + if (adapter) { + if (adapter->regs) + iounmap(adapter->regs); + for (i = bi->port_number - 1; i >= 0; --i) + if (adapter->port[i].dev) + free_netdev(adapter->port[i].dev); + } + pci_release_regions(pdev); + out_disable_pdev: + pci_disable_device(pdev); + pci_set_drvdata(pdev, NULL); + return err; +} + +static inline void t1_sw_reset(struct pci_dev *pdev) +{ + pci_write_config_dword(pdev, A_PCICFG_PM_CSR, 3); + pci_write_config_dword(pdev, A_PCICFG_PM_CSR, 0); +} + +static void __devexit remove_one(struct pci_dev *pdev) +{ + struct net_device *dev = pci_get_drvdata(pdev); + + if (dev) { + int i; + struct adapter *adapter = dev->priv; + + for_each_port(adapter, i) + if (test_bit(i, &adapter->registered_device_map)) + unregister_netdev(adapter->port[i].dev); + + t1_free_sw_modules(adapter); + iounmap(adapter->regs); + while (--i >= 0) + if (adapter->port[i].dev) + free_netdev(adapter->port[i].dev); + pci_release_regions(pdev); + pci_disable_device(pdev); + pci_set_drvdata(pdev, NULL); + t1_sw_reset(pdev); + } +} + +static struct pci_driver driver = { + .name = driver_name, + .id_table = t1_pci_tbl, + .probe = init_one, + .remove = __devexit_p(remove_one), +}; + +static int __init t1_init_module(void) +{ + return pci_module_init(&driver); +} + +static void __exit t1_cleanup_module(void) +{ + pci_unregister_driver(&driver); +} + +module_init(t1_init_module); +module_exit(t1_cleanup_module); + diff --git a/drivers/net/chelsio/cxgb2.h b/drivers/net/chelsio/cxgb2.h new file mode 100644 index 00000000000..6ac326afcf0 --- /dev/null +++ b/drivers/net/chelsio/cxgb2.h @@ -0,0 +1,122 @@ +/***************************************************************************** + * * + * File: cxgb2.h * + * $Revision: 1.8 $ * + * $Date: 2005/03/23 07:41:27 $ * + * Description: * + * part of the Chelsio 10Gb Ethernet Driver. * + * * + * This program is free software; you can redistribute it and/or modify * + * it under the terms of the GNU General Public License, version 2, as * + * published by the Free Software Foundation. * + * * + * You should have received a copy of the GNU General Public License along * + * with this program; if not, write to the Free Software Foundation, Inc., * + * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. * + * * + * THIS SOFTWARE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR IMPLIED * + * WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED WARRANTIES OF * + * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. * + * * + * http://www.chelsio.com * + * * + * Copyright (c) 2003 - 2005 Chelsio Communications, Inc. * + * All rights reserved. * + * * + * Maintainers: maintainers@chelsio.com * + * * + * Authors: Dimitrios Michailidis * + * Tina Yang * + * Felix Marti * + * Scott Bardone * + * Kurt Ottaway * + * Frank DiMambro * + * * + * History: * + * * + ****************************************************************************/ + +#ifndef __CXGB_LINUX_H__ +#define __CXGB_LINUX_H__ + +#include +#include +#include +#include +#include + +/* This belongs in if_ether.h */ +#define ETH_P_CPL5 0xf + +struct cmac; +struct cphy; + +struct port_info { + struct net_device *dev; + struct cmac *mac; + struct cphy *phy; + struct link_config link_config; + struct net_device_stats netstats; +}; + +struct cxgbdev; +struct t1_sge; +struct pemc3; +struct pemc4; +struct pemc5; +struct peulp; +struct petp; +struct pecspi; +struct peespi; +struct work_struct; +struct vlan_group; + +enum { /* adapter flags */ + FULL_INIT_DONE = 0x1, + USING_MSI = 0x2, + TSO_CAPABLE = 0x4, + TCP_CSUM_CAPABLE = 0x8, + UDP_CSUM_CAPABLE = 0x10, + VLAN_ACCEL_CAPABLE = 0x20, + RX_CSUM_ENABLED = 0x40, +}; + +struct adapter { + u8 *regs; + struct pci_dev *pdev; + unsigned long registered_device_map; + unsigned long open_device_map; + unsigned int flags; + + const char *name; + int msg_enable; + u32 mmio_len; + + struct work_struct ext_intr_handler_task; + struct adapter_params params; + + struct vlan_group *vlan_grp; + + /* Terminator modules. */ + struct sge *sge; + struct pemc3 *mc3; + struct pemc4 *mc4; + struct pemc5 *mc5; + struct petp *tp; + struct pecspi *cspi; + struct peespi *espi; + struct peulp *ulp; + + struct port_info port[MAX_NPORTS]; + struct work_struct stats_update_task; + struct timer_list stats_update_timer; + + struct semaphore mib_mutex; + spinlock_t tpi_lock; + spinlock_t work_lock; + + spinlock_t async_lock ____cacheline_aligned; /* guards async operations */ + u32 slow_intr_mask; +}; + +#endif diff --git a/drivers/net/chelsio/elmer0.h b/drivers/net/chelsio/elmer0.h new file mode 100644 index 00000000000..08f148643e7 --- /dev/null +++ b/drivers/net/chelsio/elmer0.h @@ -0,0 +1,157 @@ +/***************************************************************************** + * * + * File: elmer0.h * + * $Revision: 1.3 $ * + * $Date: 2005/03/23 07:15:58 $ * + * Description: * + * part of the Chelsio 10Gb Ethernet Driver. * + * * + * This program is free software; you can redistribute it and/or modify * + * it under the terms of the GNU General Public License, version 2, as * + * published by the Free Software Foundation. * + * * + * You should have received a copy of the GNU General Public License along * + * with this program; if not, write to the Free Software Foundation, Inc., * + * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. * + * * + * THIS SOFTWARE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR IMPLIED * + * WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED WARRANTIES OF * + * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. * + * * + * http://www.chelsio.com * + * * + * Copyright (c) 2003 - 2005 Chelsio Communications, Inc. * + * All rights reserved. * + * * + * Maintainers: maintainers@chelsio.com * + * * + * Authors: Dimitrios Michailidis * + * Tina Yang * + * Felix Marti * + * Scott Bardone * + * Kurt Ottaway * + * Frank DiMambro * + * * + * History: * + * * + ****************************************************************************/ + +#ifndef CHELSIO_ELMER0_H +#define CHELSIO_ELMER0_H + +/* ELMER0 flavors */ +enum { + ELMER0_XC2S300E_6FT256_C, + ELMER0_XC2S100E_6TQ144_C +}; + +/* ELMER0 registers */ +#define A_ELMER0_VERSION 0x100000 +#define A_ELMER0_PHY_CFG 0x100004 +#define A_ELMER0_INT_ENABLE 0x100008 +#define A_ELMER0_INT_CAUSE 0x10000c +#define A_ELMER0_GPI_CFG 0x100010 +#define A_ELMER0_GPI_STAT 0x100014 +#define A_ELMER0_GPO 0x100018 +#define A_ELMER0_PORT0_MI1_CFG 0x400000 + +#define S_MI1_MDI_ENABLE 0 +#define V_MI1_MDI_ENABLE(x) ((x) << S_MI1_MDI_ENABLE) +#define F_MI1_MDI_ENABLE V_MI1_MDI_ENABLE(1U) + +#define S_MI1_MDI_INVERT 1 +#define V_MI1_MDI_INVERT(x) ((x) << S_MI1_MDI_INVERT) +#define F_MI1_MDI_INVERT V_MI1_MDI_INVERT(1U) + +#define S_MI1_PREAMBLE_ENABLE 2 +#define V_MI1_PREAMBLE_ENABLE(x) ((x) << S_MI1_PREAMBLE_ENABLE) +#define F_MI1_PREAMBLE_ENABLE V_MI1_PREAMBLE_ENABLE(1U) + +#define S_MI1_SOF 3 +#define M_MI1_SOF 0x3 +#define V_MI1_SOF(x) ((x) << S_MI1_SOF) +#define G_MI1_SOF(x) (((x) >> S_MI1_SOF) & M_MI1_SOF) + +#define S_MI1_CLK_DIV 5 +#define M_MI1_CLK_DIV 0xff +#define V_MI1_CLK_DIV(x) ((x) << S_MI1_CLK_DIV) +#define G_MI1_CLK_DIV(x) (((x) >> S_MI1_CLK_DIV) & M_MI1_CLK_DIV) + +#define A_ELMER0_PORT0_MI1_ADDR 0x400004 + +#define S_MI1_REG_ADDR 0 +#define M_MI1_REG_ADDR 0x1f +#define V_MI1_REG_ADDR(x) ((x) << S_MI1_REG_ADDR) +#define G_MI1_REG_ADDR(x) (((x) >> S_MI1_REG_ADDR) & M_MI1_REG_ADDR) + +#define S_MI1_PHY_ADDR 5 +#define M_MI1_PHY_ADDR 0x1f +#define V_MI1_PHY_ADDR(x) ((x) << S_MI1_PHY_ADDR) +#define G_MI1_PHY_ADDR(x) (((x) >> S_MI1_PHY_ADDR) & M_MI1_PHY_ADDR) + +#define A_ELMER0_PORT0_MI1_DATA 0x400008 + +#define S_MI1_DATA 0 +#define M_MI1_DATA 0xffff +#define V_MI1_DATA(x) ((x) << S_MI1_DATA) +#define G_MI1_DATA(x) (((x) >> S_MI1_DATA) & M_MI1_DATA) + +#define A_ELMER0_PORT0_MI1_OP 0x40000c + +#define S_MI1_OP 0 +#define M_MI1_OP 0x3 +#define V_MI1_OP(x) ((x) << S_MI1_OP) +#define G_MI1_OP(x) (((x) >> S_MI1_OP) & M_MI1_OP) + +#define S_MI1_ADDR_AUTOINC 2 +#define V_MI1_ADDR_AUTOINC(x) ((x) << S_MI1_ADDR_AUTOINC) +#define F_MI1_ADDR_AUTOINC V_MI1_ADDR_AUTOINC(1U) + +#define S_MI1_OP_BUSY 31 +#define V_MI1_OP_BUSY(x) ((x) << S_MI1_OP_BUSY) +#define F_MI1_OP_BUSY V_MI1_OP_BUSY(1U) + +#define A_ELMER0_PORT1_MI1_CFG 0x500000 +#define A_ELMER0_PORT1_MI1_ADDR 0x500004 +#define A_ELMER0_PORT1_MI1_DATA 0x500008 +#define A_ELMER0_PORT1_MI1_OP 0x50000c +#define A_ELMER0_PORT2_MI1_CFG 0x600000 +#define A_ELMER0_PORT2_MI1_ADDR 0x600004 +#define A_ELMER0_PORT2_MI1_DATA 0x600008 +#define A_ELMER0_PORT2_MI1_OP 0x60000c +#define A_ELMER0_PORT3_MI1_CFG 0x700000 +#define A_ELMER0_PORT3_MI1_ADDR 0x700004 +#define A_ELMER0_PORT3_MI1_DATA 0x700008 +#define A_ELMER0_PORT3_MI1_OP 0x70000c + +/* Simple bit definition for GPI and GP0 registers. */ +#define ELMER0_GP_BIT0 0x0001 +#define ELMER0_GP_BIT1 0x0002 +#define ELMER0_GP_BIT2 0x0004 +#define ELMER0_GP_BIT3 0x0008 +#define ELMER0_GP_BIT4 0x0010 +#define ELMER0_GP_BIT5 0x0020 +#define ELMER0_GP_BIT6 0x0040 +#define ELMER0_GP_BIT7 0x0080 +#define ELMER0_GP_BIT8 0x0100 +#define ELMER0_GP_BIT9 0x0200 +#define ELMER0_GP_BIT10 0x0400 +#define ELMER0_GP_BIT11 0x0800 +#define ELMER0_GP_BIT12 0x1000 +#define ELMER0_GP_BIT13 0x2000 +#define ELMER0_GP_BIT14 0x4000 +#define ELMER0_GP_BIT15 0x8000 +#define ELMER0_GP_BIT16 0x10000 +#define ELMER0_GP_BIT17 0x20000 +#define ELMER0_GP_BIT18 0x40000 +#define ELMER0_GP_BIT19 0x80000 + +#define MI1_OP_DIRECT_WRITE 1 +#define MI1_OP_DIRECT_READ 2 + +#define MI1_OP_INDIRECT_ADDRESS 0 +#define MI1_OP_INDIRECT_WRITE 1 +#define MI1_OP_INDIRECT_READ_INC 2 +#define MI1_OP_INDIRECT_READ 3 + +#endif diff --git a/drivers/net/chelsio/espi.c b/drivers/net/chelsio/espi.c new file mode 100644 index 00000000000..7ec2dc7bafa --- /dev/null +++ b/drivers/net/chelsio/espi.c @@ -0,0 +1,386 @@ +/***************************************************************************** + * * + * File: espi.c * + * $Revision: 1.9 $ * + * $Date: 2005/03/23 07:41:27 $ * + * Description: * + * Ethernet SPI functionality. * + * part of the Chelsio 10Gb Ethernet Driver. * + * * + * This program is free software; you can redistribute it and/or modify * + * it under the terms of the GNU General Public License, version 2, as * + * published by the Free Software Foundation. * + * * + * You should have received a copy of the GNU General Public License along * + * with this program; if not, write to the Free Software Foundation, Inc., * + * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. * + * * + * THIS SOFTWARE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR IMPLIED * + * WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED WARRANTIES OF * + * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. * + * * + * http://www.chelsio.com * + * * + * Copyright (c) 2003 - 2005 Chelsio Communications, Inc. * + * All rights reserved. * + * * + * Maintainers: maintainers@chelsio.com * + * * + * Authors: Dimitrios Michailidis * + * Tina Yang * + * Felix Marti * + * Scott Bardone * + * Kurt Ottaway * + * Frank DiMambro * + * * + * History: * + * * + ****************************************************************************/ + +#include "common.h" +#include "regs.h" +#include "espi.h" + +struct peespi { + adapter_t *adapter; + struct espi_intr_counts intr_cnt; + u32 misc_ctrl; + spinlock_t lock; +}; + +#define ESPI_INTR_MASK (F_DIP4ERR | F_RXDROP | F_TXDROP | F_RXOVERFLOW | \ + F_RAMPARITYERR | F_DIP2PARITYERR) +#define MON_MASK (V_MONITORED_PORT_NUM(3) | F_MONITORED_DIRECTION \ + | F_MONITORED_INTERFACE) + +#define TRICN_CNFG 14 +#define TRICN_CMD_READ 0x11 +#define TRICN_CMD_WRITE 0x21 +#define TRICN_CMD_ATTEMPTS 10 + +static int tricn_write(adapter_t *adapter, int bundle_addr, int module_addr, + int ch_addr, int reg_offset, u32 wr_data) +{ + int busy, attempts = TRICN_CMD_ATTEMPTS; + + t1_write_reg_4(adapter, A_ESPI_CMD_ADDR, V_WRITE_DATA(wr_data) | + V_REGISTER_OFFSET(reg_offset) | + V_CHANNEL_ADDR(ch_addr) | V_MODULE_ADDR(module_addr) | + V_BUNDLE_ADDR(bundle_addr) | + V_SPI4_COMMAND(TRICN_CMD_WRITE)); + t1_write_reg_4(adapter, A_ESPI_GOSTAT, 0); + + do { + busy = t1_read_reg_4(adapter, A_ESPI_GOSTAT) & F_ESPI_CMD_BUSY; + } while (busy && --attempts); + + if (busy) + CH_ERR("%s: TRICN write timed out\n", adapter->name); + + return busy; +} + +/* 1. Deassert rx_reset_core. */ +/* 2. Program TRICN_CNFG registers. */ +/* 3. Deassert rx_reset_link */ +static int tricn_init(adapter_t *adapter) +{ + int i = 0; + int sme = 1; + int stat = 0; + int timeout = 0; + int is_ready = 0; + int dynamic_deskew = 0; + + if (dynamic_deskew) + sme = 0; + + + /* 1 */ + timeout=1000; + do { + stat = t1_read_reg_4(adapter, A_ESPI_RX_RESET); + is_ready = (stat & 0x4); + timeout--; + udelay(5); + } while (!is_ready || (timeout==0)); + t1_write_reg_4(adapter, A_ESPI_RX_RESET, 0x2); + if (timeout==0) + { + CH_ERR("ESPI : ERROR : Timeout tricn_init() \n"); + t1_fatal_err(adapter); + } + + /* 2 */ + if (sme) { + tricn_write(adapter, 0, 0, 0, TRICN_CNFG, 0x81); + tricn_write(adapter, 0, 1, 0, TRICN_CNFG, 0x81); + tricn_write(adapter, 0, 2, 0, TRICN_CNFG, 0x81); + } + for (i=1; i<= 8; i++) tricn_write(adapter, 0, 0, i, TRICN_CNFG, 0xf1); + for (i=1; i<= 2; i++) tricn_write(adapter, 0, 1, i, TRICN_CNFG, 0xf1); + for (i=1; i<= 3; i++) tricn_write(adapter, 0, 2, i, TRICN_CNFG, 0xe1); + for (i=4; i<= 4; i++) tricn_write(adapter, 0, 2, i, TRICN_CNFG, 0xf1); + for (i=5; i<= 5; i++) tricn_write(adapter, 0, 2, i, TRICN_CNFG, 0xe1); + for (i=6; i<= 6; i++) tricn_write(adapter, 0, 2, i, TRICN_CNFG, 0xf1); + for (i=7; i<= 7; i++) tricn_write(adapter, 0, 2, i, TRICN_CNFG, 0x80); + for (i=8; i<= 8; i++) tricn_write(adapter, 0, 2, i, TRICN_CNFG, 0xf1); + + /* 3 */ + t1_write_reg_4(adapter, A_ESPI_RX_RESET, 0x3); + + return 0; +} + +void t1_espi_intr_enable(struct peespi *espi) +{ + u32 enable, pl_intr = t1_read_reg_4(espi->adapter, A_PL_ENABLE); + + /* + * Cannot enable ESPI interrupts on T1B because HW asserts the + * interrupt incorrectly, namely the driver gets ESPI interrupts + * but no data is actually dropped (can verify this reading the ESPI + * drop registers). Also, once the ESPI interrupt is asserted it + * cannot be cleared (HW bug). + */ + enable = t1_is_T1B(espi->adapter) ? 0 : ESPI_INTR_MASK; + t1_write_reg_4(espi->adapter, A_ESPI_INTR_ENABLE, enable); + t1_write_reg_4(espi->adapter, A_PL_ENABLE, pl_intr | F_PL_INTR_ESPI); +} + +void t1_espi_intr_clear(struct peespi *espi) +{ + t1_write_reg_4(espi->adapter, A_ESPI_INTR_STATUS, 0xffffffff); + t1_write_reg_4(espi->adapter, A_PL_CAUSE, F_PL_INTR_ESPI); +} + +void t1_espi_intr_disable(struct peespi *espi) +{ + u32 pl_intr = t1_read_reg_4(espi->adapter, A_PL_ENABLE); + + t1_write_reg_4(espi->adapter, A_ESPI_INTR_ENABLE, 0); + t1_write_reg_4(espi->adapter, A_PL_ENABLE, pl_intr & ~F_PL_INTR_ESPI); +} + +int t1_espi_intr_handler(struct peespi *espi) +{ + u32 cnt; + u32 status = t1_read_reg_4(espi->adapter, A_ESPI_INTR_STATUS); + + if (status & F_DIP4ERR) + espi->intr_cnt.DIP4_err++; + if (status & F_RXDROP) + espi->intr_cnt.rx_drops++; + if (status & F_TXDROP) + espi->intr_cnt.tx_drops++; + if (status & F_RXOVERFLOW) + espi->intr_cnt.rx_ovflw++; + if (status & F_RAMPARITYERR) + espi->intr_cnt.parity_err++; + if (status & F_DIP2PARITYERR) { + espi->intr_cnt.DIP2_parity_err++; + + /* + * Must read the error count to clear the interrupt + * that it causes. + */ + cnt = t1_read_reg_4(espi->adapter, A_ESPI_DIP2_ERR_COUNT); + } + + /* + * For T1B we need to write 1 to clear ESPI interrupts. For T2+ we + * write the status as is. + */ + if (status && t1_is_T1B(espi->adapter)) + status = 1; + t1_write_reg_4(espi->adapter, A_ESPI_INTR_STATUS, status); + return 0; +} + +static void espi_setup_for_pm3393(adapter_t *adapter) +{ + u32 wmark = t1_is_T1B(adapter) ? 0x4000 : 0x3200; + + t1_write_reg_4(adapter, A_ESPI_SCH_TOKEN0, 0x1f4); + t1_write_reg_4(adapter, A_ESPI_SCH_TOKEN1, 0x1f4); + t1_write_reg_4(adapter, A_ESPI_SCH_TOKEN2, 0x1f4); + t1_write_reg_4(adapter, A_ESPI_SCH_TOKEN3, 0x1f4); + t1_write_reg_4(adapter, A_ESPI_RX_FIFO_ALMOST_EMPTY_WATERMARK, 0x100); + t1_write_reg_4(adapter, A_ESPI_RX_FIFO_ALMOST_FULL_WATERMARK, wmark); + t1_write_reg_4(adapter, A_ESPI_CALENDAR_LENGTH, 3); + t1_write_reg_4(adapter, A_ESPI_TRAIN, 0x08000008); + t1_write_reg_4(adapter, A_PORT_CONFIG, + V_RX_NPORTS(1) | V_TX_NPORTS(1)); +} + +static void espi_setup_for_vsc7321(adapter_t *adapter) +{ + u32 wmark = t1_is_T1B(adapter) ? 0x4000 : 0x3200; + + t1_write_reg_4(adapter, A_ESPI_SCH_TOKEN0, 0x1f4); + t1_write_reg_4(adapter, A_ESPI_SCH_TOKEN1, 0x1f4); + t1_write_reg_4(adapter, A_ESPI_SCH_TOKEN2, 0x1f4); + t1_write_reg_4(adapter, A_ESPI_SCH_TOKEN3, 0x1f4); + t1_write_reg_4(adapter, A_ESPI_RX_FIFO_ALMOST_EMPTY_WATERMARK, 0x100); + t1_write_reg_4(adapter, A_ESPI_RX_FIFO_ALMOST_FULL_WATERMARK, wmark); + t1_write_reg_4(adapter, A_ESPI_CALENDAR_LENGTH, 3); + t1_write_reg_4(adapter, A_ESPI_TRAIN, 0x08000008); + t1_write_reg_4(adapter, A_PORT_CONFIG, + V_RX_NPORTS(1) | V_TX_NPORTS(1)); +} + +/* + * Note that T1B requires at least 2 ports for IXF1010 due to a HW bug. + */ +static void espi_setup_for_ixf1010(adapter_t *adapter, int nports) +{ + t1_write_reg_4(adapter, A_ESPI_CALENDAR_LENGTH, 1); + if (nports == 4) { + if (is_T2(adapter)) { + t1_write_reg_4(adapter, A_ESPI_RX_FIFO_ALMOST_FULL_WATERMARK, + 0xf00); + t1_write_reg_4(adapter, A_ESPI_RX_FIFO_ALMOST_EMPTY_WATERMARK, + 0x3c0); + } else { + t1_write_reg_4(adapter, A_ESPI_RX_FIFO_ALMOST_FULL_WATERMARK, + 0x7ff); + t1_write_reg_4(adapter, A_ESPI_RX_FIFO_ALMOST_EMPTY_WATERMARK, + 0x1ff); + } + } else { + t1_write_reg_4(adapter, A_ESPI_RX_FIFO_ALMOST_FULL_WATERMARK, + 0x1fff); + t1_write_reg_4(adapter, A_ESPI_RX_FIFO_ALMOST_EMPTY_WATERMARK, + 0x7ff); + } + t1_write_reg_4(adapter, A_PORT_CONFIG, + V_RX_NPORTS(nports) | V_TX_NPORTS(nports)); +} + +/* T2 Init part -- */ +/* 1. Set T_ESPI_MISCCTRL_ADDR */ +/* 2. Init ESPI registers. */ +/* 3. Init TriCN Hard Macro */ +int t1_espi_init(struct peespi *espi, int mac_type, int nports) +{ + u32 status_enable_extra = 0; + adapter_t *adapter = espi->adapter; + u32 cnt; + u32 status, burstval = 0x800100; + + /* Disable ESPI training. MACs that can handle it enable it below. */ + t1_write_reg_4(adapter, A_ESPI_TRAIN, 0); + + if (is_T2(adapter)) { + t1_write_reg_4(adapter, A_ESPI_MISC_CONTROL, + V_OUT_OF_SYNC_COUNT(4) | + V_DIP2_PARITY_ERR_THRES(3) | V_DIP4_THRES(1)); + if (nports == 4) { + /* T204: maxburst1 = 0x40, maxburst2 = 0x20 */ + burstval = 0x200040; + } + } + t1_write_reg_4(adapter, A_ESPI_MAXBURST1_MAXBURST2, burstval); + + if (mac_type == CHBT_MAC_PM3393) + espi_setup_for_pm3393(adapter); + else if (mac_type == CHBT_MAC_VSC7321) + espi_setup_for_vsc7321(adapter); + else if (mac_type == CHBT_MAC_IXF1010) { + status_enable_extra = F_INTEL1010MODE; + espi_setup_for_ixf1010(adapter, nports); + } else + return -1; + + /* + * Make sure any pending interrupts from the SPI are + * Cleared before enabling the interrupt. + */ + t1_write_reg_4(espi->adapter, A_ESPI_INTR_ENABLE, ESPI_INTR_MASK); + status = t1_read_reg_4(espi->adapter, A_ESPI_INTR_STATUS); + if (status & F_DIP2PARITYERR) { + cnt = t1_read_reg_4(espi->adapter, A_ESPI_DIP2_ERR_COUNT); + } + + /* + * For T1B we need to write 1 to clear ESPI interrupts. For T2+ we + * write the status as is. + */ + if (status && t1_is_T1B(espi->adapter)) + status = 1; + t1_write_reg_4(espi->adapter, A_ESPI_INTR_STATUS, status); + + t1_write_reg_4(adapter, A_ESPI_FIFO_STATUS_ENABLE, + status_enable_extra | F_RXSTATUSENABLE); + + if (is_T2(adapter)) { + tricn_init(adapter); + /* + * Always position the control at the 1st port egress IN + * (sop,eop) counter to reduce PIOs for T/N210 workaround. + */ + espi->misc_ctrl = (t1_read_reg_4(adapter, A_ESPI_MISC_CONTROL) + & ~MON_MASK) | (F_MONITORED_DIRECTION + | F_MONITORED_INTERFACE); + t1_write_reg_4(adapter, A_ESPI_MISC_CONTROL, espi->misc_ctrl); + spin_lock_init(&espi->lock); + } + + return 0; +} + +void t1_espi_destroy(struct peespi *espi) +{ + kfree(espi); +} + +struct peespi *t1_espi_create(adapter_t *adapter) +{ + struct peespi *espi = kmalloc(sizeof(*espi), GFP_KERNEL); + + memset(espi, 0, sizeof(*espi)); + + if (espi) + espi->adapter = adapter; + return espi; +} + +void t1_espi_set_misc_ctrl(adapter_t *adapter, u32 val) +{ + struct peespi *espi = adapter->espi; + + if (!is_T2(adapter)) + return; + spin_lock(&espi->lock); + espi->misc_ctrl = (val & ~MON_MASK) | + (espi->misc_ctrl & MON_MASK); + t1_write_reg_4(adapter, A_ESPI_MISC_CONTROL, espi->misc_ctrl); + spin_unlock(&espi->lock); +} + +u32 t1_espi_get_mon(adapter_t *adapter, u32 addr, u8 wait) +{ + struct peespi *espi = adapter->espi; + u32 sel; + + if (!is_T2(adapter)) + return 0; + sel = V_MONITORED_PORT_NUM((addr & 0x3c) >> 2); + if (!wait) { + if (!spin_trylock(&espi->lock)) + return 0; + } + else + spin_lock(&espi->lock); + if ((sel != (espi->misc_ctrl & MON_MASK))) { + t1_write_reg_4(adapter, A_ESPI_MISC_CONTROL, + ((espi->misc_ctrl & ~MON_MASK) | sel)); + sel = t1_read_reg_4(adapter, A_ESPI_SCH_TOKEN3); + t1_write_reg_4(adapter, A_ESPI_MISC_CONTROL, + espi->misc_ctrl); + } + else + sel = t1_read_reg_4(adapter, A_ESPI_SCH_TOKEN3); + spin_unlock(&espi->lock); + return sel; +} diff --git a/drivers/net/chelsio/espi.h b/drivers/net/chelsio/espi.h new file mode 100644 index 00000000000..0f84e8b6399 --- /dev/null +++ b/drivers/net/chelsio/espi.h @@ -0,0 +1,67 @@ +/***************************************************************************** + * * + * File: espi.h * + * $Revision: 1.4 $ * + * $Date: 2005/03/23 07:15:58 $ * + * Description: * + * part of the Chelsio 10Gb Ethernet Driver. * + * * + * This program is free software; you can redistribute it and/or modify * + * it under the terms of the GNU General Public License, version 2, as * + * published by the Free Software Foundation. * + * * + * You should have received a copy of the GNU General Public License along * + * with this program; if not, write to the Free Software Foundation, Inc., * + * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. * + * * + * THIS SOFTWARE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR IMPLIED * + * WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED WARRANTIES OF * + * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. * + * * + * http://www.chelsio.com * + * * + * Copyright (c) 2003 - 2005 Chelsio Communications, Inc. * + * All rights reserved. * + * * + * Maintainers: maintainers@chelsio.com * + * * + * Authors: Dimitrios Michailidis * + * Tina Yang * + * Felix Marti * + * Scott Bardone * + * Kurt Ottaway * + * Frank DiMambro * + * * + * History: * + * * + ****************************************************************************/ + +#ifndef CHELSIO_ESPI_H +#define CHELSIO_ESPI_H + +#include "common.h" + +struct espi_intr_counts { + unsigned int DIP4_err; + unsigned int rx_drops; + unsigned int tx_drops; + unsigned int rx_ovflw; + unsigned int parity_err; + unsigned int DIP2_parity_err; +}; + +struct peespi; + +struct peespi *t1_espi_create(adapter_t *adapter); +void t1_espi_destroy(struct peespi *espi); +int t1_espi_init(struct peespi *espi, int mac_type, int nports); + +void t1_espi_intr_enable(struct peespi *); +void t1_espi_intr_clear(struct peespi *); +void t1_espi_intr_disable(struct peespi *); +int t1_espi_intr_handler(struct peespi *); + +void t1_espi_set_misc_ctrl(adapter_t *adapter, u32 val); +u32 t1_espi_get_mon(adapter_t *adapter, u32 addr, u8 wait); + +#endif diff --git a/drivers/net/chelsio/gmac.h b/drivers/net/chelsio/gmac.h new file mode 100644 index 00000000000..24501e2232c --- /dev/null +++ b/drivers/net/chelsio/gmac.h @@ -0,0 +1,133 @@ +/***************************************************************************** + * * + * File: gmac.h * + * $Revision: 1.3 $ * + * $Date: 2005/03/23 07:15:58 $ * + * Description: * + * Generic MAC functionality. * + * part of the Chelsio 10Gb Ethernet Driver. * + * * + * This program is free software; you can redistribute it and/or modify * + * it under the terms of the GNU General Public License, version 2, as * + * published by the Free Software Foundation. * + * * + * You should have received a copy of the GNU General Public License along * + * with this program; if not, write to the Free Software Foundation, Inc., * + * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. * + * * + * THIS SOFTWARE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR IMPLIED * + * WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED WARRANTIES OF * + * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. * + * * + * http://www.chelsio.com * + * * + * Copyright (c) 2003 - 2005 Chelsio Communications, Inc. * + * All rights reserved. * + * * + * Maintainers: maintainers@chelsio.com * + * * + * Authors: Dimitrios Michailidis * + * Tina Yang * + * Felix Marti * + * Scott Bardone * + * Kurt Ottaway * + * Frank DiMambro * + * * + * History: * + * * + ****************************************************************************/ + +#ifndef CHELSIO_GMAC_H +#define CHELSIO_GMAC_H + +#include "common.h" + +enum { MAC_STATS_UPDATE_FAST, MAC_STATS_UPDATE_FULL }; +enum { MAC_DIRECTION_RX = 1, MAC_DIRECTION_TX = 2 }; + +struct cmac_statistics { + /* Transmit */ + u64 TxOctetsOK; + u64 TxOctetsBad; + u64 TxUnicastFramesOK; + u64 TxMulticastFramesOK; + u64 TxBroadcastFramesOK; + u64 TxPauseFrames; + u64 TxFramesWithDeferredXmissions; + u64 TxLateCollisions; + u64 TxTotalCollisions; + u64 TxFramesAbortedDueToXSCollisions; + u64 TxUnderrun; + u64 TxLengthErrors; + u64 TxInternalMACXmitError; + u64 TxFramesWithExcessiveDeferral; + u64 TxFCSErrors; + + /* Receive */ + u64 RxOctetsOK; + u64 RxOctetsBad; + u64 RxUnicastFramesOK; + u64 RxMulticastFramesOK; + u64 RxBroadcastFramesOK; + u64 RxPauseFrames; + u64 RxFCSErrors; + u64 RxAlignErrors; + u64 RxSymbolErrors; + u64 RxDataErrors; + u64 RxSequenceErrors; + u64 RxRuntErrors; + u64 RxJabberErrors; + u64 RxInternalMACRcvError; + u64 RxInRangeLengthErrors; + u64 RxOutOfRangeLengthField; + u64 RxFrameTooLongErrors; +}; + +struct cmac_ops { + void (*destroy)(struct cmac *); + int (*reset)(struct cmac *); + int (*interrupt_enable)(struct cmac *); + int (*interrupt_disable)(struct cmac *); + int (*interrupt_clear)(struct cmac *); + int (*interrupt_handler)(struct cmac *); + + int (*enable)(struct cmac *, int); + int (*disable)(struct cmac *, int); + + int (*loopback_enable)(struct cmac *); + int (*loopback_disable)(struct cmac *); + + int (*set_mtu)(struct cmac *, int mtu); + int (*set_rx_mode)(struct cmac *, struct t1_rx_mode *rm); + + int (*set_speed_duplex_fc)(struct cmac *, int speed, int duplex, int fc); + int (*get_speed_duplex_fc)(struct cmac *, int *speed, int *duplex, + int *fc); + + const struct cmac_statistics *(*statistics_update)(struct cmac *, int); + + int (*macaddress_get)(struct cmac *, u8 mac_addr[6]); + int (*macaddress_set)(struct cmac *, u8 mac_addr[6]); +}; + +typedef struct _cmac_instance cmac_instance; + +struct cmac { + struct cmac_statistics stats; + adapter_t *adapter; + struct cmac_ops *ops; + cmac_instance *instance; +}; + +struct gmac { + unsigned int stats_update_period; + struct cmac *(*create)(adapter_t *adapter, int index); + int (*reset)(adapter_t *); +}; + +extern struct gmac t1_pm3393_ops; +extern struct gmac t1_chelsio_mac_ops; +extern struct gmac t1_vsc7321_ops; +extern struct gmac t1_ixf1010_ops; +extern struct gmac t1_dummy_mac_ops; +#endif diff --git a/drivers/net/chelsio/mv88x201x.c b/drivers/net/chelsio/mv88x201x.c new file mode 100644 index 00000000000..f54133af1bc --- /dev/null +++ b/drivers/net/chelsio/mv88x201x.c @@ -0,0 +1,258 @@ +/***************************************************************************** + * * + * File: mv88x201x.c * + * $Revision: 1.7 $ * + * $Date: 2005/03/23 07:15:59 $ * + * Description: * + * Marvell PHY (mv88x201x) functionality. * + * part of the Chelsio 10Gb Ethernet Driver. * + * * + * This program is free software; you can redistribute it and/or modify * + * it under the terms of the GNU General Public License, version 2, as * + * published by the Free Software Foundation. * + * * + * You should have received a copy of the GNU General Public License along * + * with this program; if not, write to the Free Software Foundation, Inc., * + * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. * + * * + * THIS SOFTWARE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR IMPLIED * + * WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED WARRANTIES OF * + * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. * + * * + * http://www.chelsio.com * + * * + * Copyright (c) 2003 - 2005 Chelsio Communications, Inc. * + * All rights reserved. * + * * + * Maintainers: maintainers@chelsio.com * + * * + * Authors: Dimitrios Michailidis * + * Tina Yang * + * Felix Marti * + * Scott Bardone * + * Kurt Ottaway * + * Frank DiMambro * + * * + * History: * + * * + ****************************************************************************/ + +#include "cphy.h" +#include "elmer0.h" + +/* + * The 88x2010 Rev C. requires some link status registers * to be read + * twice in order to get the right values. Future * revisions will fix + * this problem and then this macro * can disappear. + */ +#define MV88x2010_LINK_STATUS_BUGS 1 + +static int led_init(struct cphy *cphy) +{ + /* Setup the LED registers so we can turn on/off. + * Writing these bits maps control to another + * register. mmd(0x1) addr(0x7) + */ + mdio_write(cphy, 0x3, 0x8304, 0xdddd); + return 0; +} + +static int led_link(struct cphy *cphy, u32 do_enable) +{ + u32 led = 0; +#define LINK_ENABLE_BIT 0x1 + + mdio_read(cphy, 0x1, 0x7, &led); + + if (do_enable & LINK_ENABLE_BIT) { + led |= LINK_ENABLE_BIT; + mdio_write(cphy, 0x1, 0x7, led); + } else { + led &= ~LINK_ENABLE_BIT; + mdio_write(cphy, 0x1, 0x7, led); + } + return 0; +} + +/* Port Reset */ +static int mv88x201x_reset(struct cphy *cphy, int wait) +{ + /* This can be done through registers. It is not required since + * a full chip reset is used. + */ + return 0; +} + +static int mv88x201x_interrupt_enable(struct cphy *cphy) +{ + /* Enable PHY LASI interrupts. */ + mdio_write(cphy, 0x1, 0x9002, 0x1); + + /* Enable Marvell interrupts through Elmer0. */ + if (t1_is_asic(cphy->adapter)) { + u32 elmer; + + t1_tpi_read(cphy->adapter, A_ELMER0_INT_ENABLE, &elmer); + elmer |= ELMER0_GP_BIT6; + t1_tpi_write(cphy->adapter, A_ELMER0_INT_ENABLE, elmer); + } + return 0; +} + +static int mv88x201x_interrupt_disable(struct cphy *cphy) +{ + /* Disable PHY LASI interrupts. */ + mdio_write(cphy, 0x1, 0x9002, 0x0); + + /* Disable Marvell interrupts through Elmer0. */ + if (t1_is_asic(cphy->adapter)) { + u32 elmer; + + t1_tpi_read(cphy->adapter, A_ELMER0_INT_ENABLE, &elmer); + elmer &= ~ELMER0_GP_BIT6; + t1_tpi_write(cphy->adapter, A_ELMER0_INT_ENABLE, elmer); + } + return 0; +} + +static int mv88x201x_interrupt_clear(struct cphy *cphy) +{ + u32 elmer; + u32 val; + +#ifdef MV88x2010_LINK_STATUS_BUGS + /* Required to read twice before clear takes affect. */ + mdio_read(cphy, 0x1, 0x9003, &val); + mdio_read(cphy, 0x1, 0x9004, &val); + mdio_read(cphy, 0x1, 0x9005, &val); + + /* Read this register after the others above it else + * the register doesn't clear correctly. + */ + mdio_read(cphy, 0x1, 0x1, &val); +#endif + + /* Clear link status. */ + mdio_read(cphy, 0x1, 0x1, &val); + /* Clear PHY LASI interrupts. */ + mdio_read(cphy, 0x1, 0x9005, &val); + +#ifdef MV88x2010_LINK_STATUS_BUGS + /* Do it again. */ + mdio_read(cphy, 0x1, 0x9003, &val); + mdio_read(cphy, 0x1, 0x9004, &val); +#endif + + /* Clear Marvell interrupts through Elmer0. */ + if (t1_is_asic(cphy->adapter)) { + t1_tpi_read(cphy->adapter, A_ELMER0_INT_CAUSE, &elmer); + elmer |= ELMER0_GP_BIT6; + t1_tpi_write(cphy->adapter, A_ELMER0_INT_CAUSE, elmer); + } + return 0; +} + +static int mv88x201x_interrupt_handler(struct cphy *cphy) +{ + /* Clear interrupts */ + mv88x201x_interrupt_clear(cphy); + + /* We have only enabled link change interrupts and so + * cphy_cause must be a link change interrupt. + */ + return cphy_cause_link_change; +} + +static int mv88x201x_set_loopback(struct cphy *cphy, int on) +{ + return 0; +} + +static int mv88x201x_get_link_status(struct cphy *cphy, int *link_ok, + int *speed, int *duplex, int *fc) +{ + u32 val = 0; +#define LINK_STATUS_BIT 0x4 + + if (link_ok) { + /* Read link status. */ + mdio_read(cphy, 0x1, 0x1, &val); + val &= LINK_STATUS_BIT; + *link_ok = (val == LINK_STATUS_BIT); + /* Turn on/off Link LED */ + led_link(cphy, *link_ok); + } + if (speed) + *speed = SPEED_10000; + if (duplex) + *duplex = DUPLEX_FULL; + if (fc) + *fc = PAUSE_RX | PAUSE_TX; + return 0; +} + +static void mv88x201x_destroy(struct cphy *cphy) +{ + kfree(cphy); +} + +static struct cphy_ops mv88x201x_ops = { + .destroy = mv88x201x_destroy, + .reset = mv88x201x_reset, + .interrupt_enable = mv88x201x_interrupt_enable, + .interrupt_disable = mv88x201x_interrupt_disable, + .interrupt_clear = mv88x201x_interrupt_clear, + .interrupt_handler = mv88x201x_interrupt_handler, + .get_link_status = mv88x201x_get_link_status, + .set_loopback = mv88x201x_set_loopback, +}; + +static struct cphy *mv88x201x_phy_create(adapter_t *adapter, int phy_addr, + struct mdio_ops *mdio_ops) +{ + u32 val; + struct cphy *cphy = kmalloc(sizeof(*cphy), GFP_KERNEL); + + if (!cphy) + return NULL; + memset(cphy, 0, sizeof(*cphy)); + cphy_init(cphy, adapter, phy_addr, &mv88x201x_ops, mdio_ops); + + /* Commands the PHY to enable XFP's clock. */ + mdio_read(cphy, 0x3, 0x8300, &val); + mdio_write(cphy, 0x3, 0x8300, val | 1); + + /* Clear link status. Required because of a bug in the PHY. */ + mdio_read(cphy, 0x1, 0x8, &val); + mdio_read(cphy, 0x3, 0x8, &val); + + /* Allows for Link,Ack LED turn on/off */ + led_init(cphy); + return cphy; +} + +/* Chip Reset */ +static int mv88x201x_phy_reset(adapter_t *adapter) +{ + u32 val; + + t1_tpi_read(adapter, A_ELMER0_GPO, &val); + val &= ~4; + t1_tpi_write(adapter, A_ELMER0_GPO, val); + msleep(100); + + t1_tpi_write(adapter, A_ELMER0_GPO, val | 4); + msleep(1000); + + /* Now lets enable the Laser. Delay 100us */ + t1_tpi_read(adapter, A_ELMER0_GPO, &val); + val |= 0x8000; + t1_tpi_write(adapter, A_ELMER0_GPO, val); + udelay(100); + return 0; +} + +struct gphy t1_mv88x201x_ops = { + mv88x201x_phy_create, + mv88x201x_phy_reset +}; diff --git a/drivers/net/chelsio/osdep.h b/drivers/net/chelsio/osdep.h new file mode 100644 index 00000000000..095cb474434 --- /dev/null +++ b/drivers/net/chelsio/osdep.h @@ -0,0 +1,169 @@ +/***************************************************************************** + * * + * File: osdep.h * + * $Revision: 1.9 $ * + * $Date: 2005/03/23 07:41:27 $ * + * Description: * + * part of the Chelsio 10Gb Ethernet Driver. * + * * + * This program is free software; you can redistribute it and/or modify * + * it under the terms of the GNU General Public License, version 2, as * + * published by the Free Software Foundation. * + * * + * You should have received a copy of the GNU General Public License along * + * with this program; if not, write to the Free Software Foundation, Inc., * + * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. * + * * + * THIS SOFTWARE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR IMPLIED * + * WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED WARRANTIES OF * + * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. * + * * + * http://www.chelsio.com * + * * + * Copyright (c) 2003 - 2005 Chelsio Communications, Inc. * + * All rights reserved. * + * * + * Maintainers: maintainers@chelsio.com * + * * + * Authors: Dimitrios Michailidis * + * Tina Yang * + * Felix Marti * + * Scott Bardone * + * Kurt Ottaway * + * Frank DiMambro * + * * + * History: * + * * + ****************************************************************************/ + +#ifndef __CHELSIO_OSDEP_H +#define __CHELSIO_OSDEP_H + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include "cxgb2.h" + +#define DRV_NAME "cxgb" +#define PFX DRV_NAME ": " + +#define CH_ERR(fmt, ...) printk(KERN_ERR PFX fmt, ## __VA_ARGS__) +#define CH_WARN(fmt, ...) printk(KERN_WARNING PFX fmt, ## __VA_ARGS__) +#define CH_ALERT(fmt, ...) printk(KERN_ALERT PFX fmt, ## __VA_ARGS__) + +/* + * More powerful macro that selectively prints messages based on msg_enable. + * For info and debugging messages. + */ +#define CH_MSG(adapter, level, category, fmt, ...) do { \ + if ((adapter)->msg_enable & NETIF_MSG_##category) \ + printk(KERN_##level PFX "%s: " fmt, (adapter)->name, \ + ## __VA_ARGS__); \ +} while (0) + +#ifdef DEBUG +# define CH_DBG(adapter, category, fmt, ...) \ + CH_MSG(adapter, DEBUG, category, fmt, ## __VA_ARGS__) +#else +# define CH_DBG(fmt, ...) +#endif + +/* Additional NETIF_MSG_* categories */ +#define NETIF_MSG_MMIO 0x8000000 + +#define CH_DEVICE(devid, ssid, idx) \ + { PCI_VENDOR_ID_CHELSIO, devid, PCI_ANY_ID, ssid, 0, 0, idx } + +#define SUPPORTED_PAUSE (1 << 13) +#define SUPPORTED_LOOPBACK (1 << 15) + +#define ADVERTISED_PAUSE (1 << 13) +#define ADVERTISED_ASYM_PAUSE (1 << 14) + +/* + * Now that we have included the driver's main data structure, + * we typedef it to something the rest of the system understands. + */ +typedef struct adapter adapter_t; + +#define TPI_LOCK(adapter) spin_lock(&(adapter)->tpi_lock) +#define TPI_UNLOCK(adapter) spin_unlock(&(adapter)->tpi_lock) + +void t1_elmer0_ext_intr(adapter_t *adapter); +void t1_link_changed(adapter_t *adapter, int port_id, int link_status, + int speed, int duplex, int fc); + +static inline u16 t1_read_reg_2(adapter_t *adapter, u32 reg_addr) +{ + u16 val = readw(adapter->regs + reg_addr); + + CH_DBG(adapter, MMIO, "read register 0x%x value 0x%x\n", reg_addr, + val); + return val; +} + +static inline void t1_write_reg_2(adapter_t *adapter, u32 reg_addr, u16 val) +{ + CH_DBG(adapter, MMIO, "setting register 0x%x to 0x%x\n", reg_addr, + val); + writew(val, adapter->regs + reg_addr); +} + +static inline u32 t1_read_reg_4(adapter_t *adapter, u32 reg_addr) +{ + u32 val = readl(adapter->regs + reg_addr); + + CH_DBG(adapter, MMIO, "read register 0x%x value 0x%x\n", reg_addr, + val); + return val; +} + +static inline void t1_write_reg_4(adapter_t *adapter, u32 reg_addr, u32 val) +{ + CH_DBG(adapter, MMIO, "setting register 0x%x to 0x%x\n", reg_addr, + val); + writel(val, adapter->regs + reg_addr); +} + +static inline const char *port_name(adapter_t *adapter, int port_idx) +{ + return adapter->port[port_idx].dev->name; +} + +static inline void t1_set_hw_addr(adapter_t *adapter, int port_idx, + u8 hw_addr[]) +{ + memcpy(adapter->port[port_idx].dev->dev_addr, hw_addr, ETH_ALEN); +} + +struct t1_rx_mode { + struct net_device *dev; + u32 idx; + struct dev_mc_list *list; +}; + +#define t1_rx_mode_promisc(rm) (rm->dev->flags & IFF_PROMISC) +#define t1_rx_mode_allmulti(rm) (rm->dev->flags & IFF_ALLMULTI) +#define t1_rx_mode_mc_cnt(rm) (rm->dev->mc_count) + +static inline u8 *t1_get_next_mcaddr(struct t1_rx_mode *rm) +{ + u8 *addr = 0; + + if (rm->idx++ < rm->dev->mc_count) { + addr = rm->list->dmi_addr; + rm->list = rm->list->next; + } + return addr; +} + +#endif diff --git a/drivers/net/chelsio/pm3393.c b/drivers/net/chelsio/pm3393.c new file mode 100644 index 00000000000..17bd20f60d9 --- /dev/null +++ b/drivers/net/chelsio/pm3393.c @@ -0,0 +1,831 @@ +/***************************************************************************** + * * + * File: pm3393.c * + * $Revision: 1.9 $ * + * $Date: 2005/03/23 07:41:27 $ * + * Description: * + * PMC/SIERRA (pm3393) MAC-PHY functionality. * + * part of the Chelsio 10Gb Ethernet Driver. * + * * + * This program is free software; you can redistribute it and/or modify * + * it under the terms of the GNU General Public License, version 2, as * + * published by the Free Software Foundation. * + * * + * You should have received a copy of the GNU General Public License along * + * with this program; if not, write to the Free Software Foundation, Inc., * + * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. * + * * + * THIS SOFTWARE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR IMPLIED * + * WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED WARRANTIES OF * + * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. * + * * + * http://www.chelsio.com * + * * + * Copyright (c) 2003 - 2005 Chelsio Communications, Inc. * + * All rights reserved. * + * * + * Maintainers: maintainers@chelsio.com * + * * + * Authors: Dimitrios Michailidis * + * Tina Yang * + * Felix Marti * + * Scott Bardone * + * Kurt Ottaway * + * Frank DiMambro * + * * + * History: * + * * + ****************************************************************************/ + +#include "common.h" +#include "regs.h" +#include "gmac.h" +#include "elmer0.h" +#include "suni1x10gexp_regs.h" + +/* 802.3ae 10Gb/s MDIO Manageable Device(MMD) + */ +#define MMD_RESERVED 0 +#define MMD_PMAPMD 1 +#define MMD_WIS 2 +#define MMD_PCS 3 +#define MMD_PHY_XGXS 4 /* XGMII Extender Sublayer */ +#define MMD_DTE_XGXS 5 + +#define PHY_XGXS_CTRL_1 0 +#define PHY_XGXS_STATUS_1 1 + +#define OFFSET(REG_ADDR) (REG_ADDR << 2) + +/* Max frame size PM3393 can handle. Includes Ethernet header and CRC. */ +#define MAX_FRAME_SIZE 9600 + +#define IPG 12 +#define TXXG_CONF1_VAL ((IPG << SUNI1x10GEXP_BITOFF_TXXG_IPGT) | \ + SUNI1x10GEXP_BITMSK_TXXG_32BIT_ALIGN | SUNI1x10GEXP_BITMSK_TXXG_CRCEN | \ + SUNI1x10GEXP_BITMSK_TXXG_PADEN) +#define RXXG_CONF1_VAL (SUNI1x10GEXP_BITMSK_RXXG_PUREP | 0x14 | \ + SUNI1x10GEXP_BITMSK_RXXG_FLCHK | SUNI1x10GEXP_BITMSK_RXXG_CRC_STRIP) + +/* Update statistics every 15 minutes */ +#define STATS_TICK_SECS (15 * 60) + +enum { /* RMON registers */ + RxOctetsReceivedOK = SUNI1x10GEXP_REG_MSTAT_COUNTER_1_LOW, + RxUnicastFramesReceivedOK = SUNI1x10GEXP_REG_MSTAT_COUNTER_4_LOW, + RxMulticastFramesReceivedOK = SUNI1x10GEXP_REG_MSTAT_COUNTER_5_LOW, + RxBroadcastFramesReceivedOK = SUNI1x10GEXP_REG_MSTAT_COUNTER_6_LOW, + RxPAUSEMACCtrlFramesReceived = SUNI1x10GEXP_REG_MSTAT_COUNTER_8_LOW, + RxFrameCheckSequenceErrors = SUNI1x10GEXP_REG_MSTAT_COUNTER_10_LOW, + RxFramesLostDueToInternalMACErrors = SUNI1x10GEXP_REG_MSTAT_COUNTER_11_LOW, + RxSymbolErrors = SUNI1x10GEXP_REG_MSTAT_COUNTER_12_LOW, + RxInRangeLengthErrors = SUNI1x10GEXP_REG_MSTAT_COUNTER_13_LOW, + RxFramesTooLongErrors = SUNI1x10GEXP_REG_MSTAT_COUNTER_15_LOW, + RxJabbers = SUNI1x10GEXP_REG_MSTAT_COUNTER_16_LOW, + RxFragments = SUNI1x10GEXP_REG_MSTAT_COUNTER_17_LOW, + RxUndersizedFrames = SUNI1x10GEXP_REG_MSTAT_COUNTER_18_LOW, + + TxOctetsTransmittedOK = SUNI1x10GEXP_REG_MSTAT_COUNTER_33_LOW, + TxFramesLostDueToInternalMACTransmissionError = SUNI1x10GEXP_REG_MSTAT_COUNTER_35_LOW, + TxTransmitSystemError = SUNI1x10GEXP_REG_MSTAT_COUNTER_36_LOW, + TxUnicastFramesTransmittedOK = SUNI1x10GEXP_REG_MSTAT_COUNTER_38_LOW, + TxMulticastFramesTransmittedOK = SUNI1x10GEXP_REG_MSTAT_COUNTER_40_LOW, + TxBroadcastFramesTransmittedOK = SUNI1x10GEXP_REG_MSTAT_COUNTER_42_LOW, + TxPAUSEMACCtrlFramesTransmitted = SUNI1x10GEXP_REG_MSTAT_COUNTER_43_LOW +}; + +struct _cmac_instance { + u8 enabled; + u8 fc; + u8 mac_addr[6]; +}; + +static int pmread(struct cmac *cmac, u32 reg, u32 * data32) +{ + t1_tpi_read(cmac->adapter, OFFSET(reg), data32); + return 0; +} + +static int pmwrite(struct cmac *cmac, u32 reg, u32 data32) +{ + t1_tpi_write(cmac->adapter, OFFSET(reg), data32); + return 0; +} + +/* Port reset. */ +static int pm3393_reset(struct cmac *cmac) +{ + return 0; +} + +/* + * Enable interrupts for the PM3393 + + 1. Enable PM3393 BLOCK interrupts. + 2. Enable PM3393 Master Interrupt bit(INTE) + 3. Enable ELMER's PM3393 bit. + 4. Enable Terminator external interrupt. +*/ +static int pm3393_interrupt_enable(struct cmac *cmac) +{ + u32 pl_intr; + + /* PM3393 - Enabling all hardware block interrupts. + */ + pmwrite(cmac, SUNI1x10GEXP_REG_SERDES_3125_INTERRUPT_ENABLE, 0xffff); + pmwrite(cmac, SUNI1x10GEXP_REG_XRF_INTERRUPT_ENABLE, 0xffff); + pmwrite(cmac, SUNI1x10GEXP_REG_XRF_DIAG_INTERRUPT_ENABLE, 0xffff); + pmwrite(cmac, SUNI1x10GEXP_REG_RXOAM_INTERRUPT_ENABLE, 0xffff); + + /* Don't interrupt on statistics overflow, we are polling */ + pmwrite(cmac, SUNI1x10GEXP_REG_MSTAT_INTERRUPT_MASK_0, 0); + pmwrite(cmac, SUNI1x10GEXP_REG_MSTAT_INTERRUPT_MASK_1, 0); + pmwrite(cmac, SUNI1x10GEXP_REG_MSTAT_INTERRUPT_MASK_2, 0); + pmwrite(cmac, SUNI1x10GEXP_REG_MSTAT_INTERRUPT_MASK_3, 0); + + pmwrite(cmac, SUNI1x10GEXP_REG_IFLX_FIFO_OVERFLOW_ENABLE, 0xffff); + pmwrite(cmac, SUNI1x10GEXP_REG_PL4ODP_INTERRUPT_MASK, 0xffff); + pmwrite(cmac, SUNI1x10GEXP_REG_XTEF_INTERRUPT_ENABLE, 0xffff); + pmwrite(cmac, SUNI1x10GEXP_REG_TXOAM_INTERRUPT_ENABLE, 0xffff); + pmwrite(cmac, SUNI1x10GEXP_REG_RXXG_CONFIG_3, 0xffff); + pmwrite(cmac, SUNI1x10GEXP_REG_PL4IO_LOCK_DETECT_MASK, 0xffff); + pmwrite(cmac, SUNI1x10GEXP_REG_TXXG_CONFIG_3, 0xffff); + pmwrite(cmac, SUNI1x10GEXP_REG_PL4IDU_INTERRUPT_MASK, 0xffff); + pmwrite(cmac, SUNI1x10GEXP_REG_EFLX_FIFO_OVERFLOW_ERROR_ENABLE, 0xffff); + + /* PM3393 - Global interrupt enable + */ + /* TBD XXX Disable for now until we figure out why error interrupts keep asserting. */ + pmwrite(cmac, SUNI1x10GEXP_REG_GLOBAL_INTERRUPT_ENABLE, + 0 /*SUNI1x10GEXP_BITMSK_TOP_INTE */ ); + + /* TERMINATOR - PL_INTERUPTS_EXT */ + pl_intr = t1_read_reg_4(cmac->adapter, A_PL_ENABLE); + pl_intr |= F_PL_INTR_EXT; + t1_write_reg_4(cmac->adapter, A_PL_ENABLE, pl_intr); + return 0; +} + +static int pm3393_interrupt_disable(struct cmac *cmac) +{ + u32 elmer; + + /* PM3393 - Enabling HW interrupt blocks. */ + pmwrite(cmac, SUNI1x10GEXP_REG_SERDES_3125_INTERRUPT_ENABLE, 0); + pmwrite(cmac, SUNI1x10GEXP_REG_XRF_INTERRUPT_ENABLE, 0); + pmwrite(cmac, SUNI1x10GEXP_REG_XRF_DIAG_INTERRUPT_ENABLE, 0); + pmwrite(cmac, SUNI1x10GEXP_REG_RXOAM_INTERRUPT_ENABLE, 0); + pmwrite(cmac, SUNI1x10GEXP_REG_MSTAT_INTERRUPT_MASK_0, 0); + pmwrite(cmac, SUNI1x10GEXP_REG_MSTAT_INTERRUPT_MASK_1, 0); + pmwrite(cmac, SUNI1x10GEXP_REG_MSTAT_INTERRUPT_MASK_2, 0); + pmwrite(cmac, SUNI1x10GEXP_REG_MSTAT_INTERRUPT_MASK_3, 0); + pmwrite(cmac, SUNI1x10GEXP_REG_IFLX_FIFO_OVERFLOW_ENABLE, 0); + pmwrite(cmac, SUNI1x10GEXP_REG_PL4ODP_INTERRUPT_MASK, 0); + pmwrite(cmac, SUNI1x10GEXP_REG_XTEF_INTERRUPT_ENABLE, 0); + pmwrite(cmac, SUNI1x10GEXP_REG_TXOAM_INTERRUPT_ENABLE, 0); + pmwrite(cmac, SUNI1x10GEXP_REG_RXXG_CONFIG_3, 0); + pmwrite(cmac, SUNI1x10GEXP_REG_PL4IO_LOCK_DETECT_MASK, 0); + pmwrite(cmac, SUNI1x10GEXP_REG_TXXG_CONFIG_3, 0); + pmwrite(cmac, SUNI1x10GEXP_REG_PL4IDU_INTERRUPT_MASK, 0); + pmwrite(cmac, SUNI1x10GEXP_REG_EFLX_FIFO_OVERFLOW_ERROR_ENABLE, 0); + + /* PM3393 - Global interrupt enable */ + pmwrite(cmac, SUNI1x10GEXP_REG_GLOBAL_INTERRUPT_ENABLE, 0); + + /* ELMER - External chip interrupts. */ + t1_tpi_read(cmac->adapter, A_ELMER0_INT_ENABLE, &elmer); + elmer &= ~ELMER0_GP_BIT1; + t1_tpi_write(cmac->adapter, A_ELMER0_INT_ENABLE, elmer); + + /* TERMINATOR - PL_INTERUPTS_EXT */ + /* DO NOT DISABLE TERMINATOR's EXTERNAL INTERRUPTS. ANOTHER CHIP + * COULD WANT THEM ENABLED. We disable PM3393 at the ELMER level. + */ + + return 0; +} + +static int pm3393_interrupt_clear(struct cmac *cmac) +{ + u32 elmer; + u32 pl_intr; + u32 val32; + + /* PM3393 - Clearing HW interrupt blocks. Note, this assumes + * bit WCIMODE=0 for a clear-on-read. + */ + pmread(cmac, SUNI1x10GEXP_REG_SERDES_3125_INTERRUPT_STATUS, &val32); + pmread(cmac, SUNI1x10GEXP_REG_XRF_INTERRUPT_STATUS, &val32); + pmread(cmac, SUNI1x10GEXP_REG_XRF_DIAG_INTERRUPT_STATUS, &val32); + pmread(cmac, SUNI1x10GEXP_REG_RXOAM_INTERRUPT_STATUS, &val32); + pmread(cmac, SUNI1x10GEXP_REG_PL4ODP_INTERRUPT, &val32); + pmread(cmac, SUNI1x10GEXP_REG_XTEF_INTERRUPT_STATUS, &val32); + pmread(cmac, SUNI1x10GEXP_REG_IFLX_FIFO_OVERFLOW_INTERRUPT, &val32); + pmread(cmac, SUNI1x10GEXP_REG_TXOAM_INTERRUPT_STATUS, &val32); + pmread(cmac, SUNI1x10GEXP_REG_RXXG_INTERRUPT, &val32); + pmread(cmac, SUNI1x10GEXP_REG_TXXG_INTERRUPT, &val32); + pmread(cmac, SUNI1x10GEXP_REG_PL4IDU_INTERRUPT, &val32); + pmread(cmac, SUNI1x10GEXP_REG_EFLX_FIFO_OVERFLOW_ERROR_INDICATION, + &val32); + pmread(cmac, SUNI1x10GEXP_REG_PL4IO_LOCK_DETECT_STATUS, &val32); + pmread(cmac, SUNI1x10GEXP_REG_PL4IO_LOCK_DETECT_CHANGE, &val32); + + /* PM3393 - Global interrupt status + */ + pmread(cmac, SUNI1x10GEXP_REG_MASTER_INTERRUPT_STATUS, &val32); + + /* ELMER - External chip interrupts. + */ + t1_tpi_read(cmac->adapter, A_ELMER0_INT_CAUSE, &elmer); + elmer |= ELMER0_GP_BIT1; + t1_tpi_write(cmac->adapter, A_ELMER0_INT_CAUSE, elmer); + + /* TERMINATOR - PL_INTERUPTS_EXT + */ + pl_intr = t1_read_reg_4(cmac->adapter, A_PL_CAUSE); + pl_intr |= F_PL_INTR_EXT; + t1_write_reg_4(cmac->adapter, A_PL_CAUSE, pl_intr); + + return 0; +} + +/* Interrupt handler */ +static int pm3393_interrupt_handler(struct cmac *cmac) +{ + u32 master_intr_status; +/* + 1. Read master interrupt register. + 2. Read BLOCK's interrupt status registers. + 3. Handle BLOCK interrupts. +*/ + /* Read the master interrupt status register. */ + pmread(cmac, SUNI1x10GEXP_REG_MASTER_INTERRUPT_STATUS, + &master_intr_status); + CH_DBG(cmac->adapter, INTR, "PM3393 intr cause 0x%x\n", + master_intr_status); + + /* TBD XXX Lets just clear everything for now */ + pm3393_interrupt_clear(cmac); + + return 0; +} + +static int pm3393_enable(struct cmac *cmac, int which) +{ + if (which & MAC_DIRECTION_RX) + pmwrite(cmac, SUNI1x10GEXP_REG_RXXG_CONFIG_1, + (RXXG_CONF1_VAL | SUNI1x10GEXP_BITMSK_RXXG_RXEN)); + + if (which & MAC_DIRECTION_TX) { + u32 val = TXXG_CONF1_VAL | SUNI1x10GEXP_BITMSK_TXXG_TXEN0; + + if (cmac->instance->fc & PAUSE_RX) + val |= SUNI1x10GEXP_BITMSK_TXXG_FCRX; + if (cmac->instance->fc & PAUSE_TX) + val |= SUNI1x10GEXP_BITMSK_TXXG_FCTX; + pmwrite(cmac, SUNI1x10GEXP_REG_TXXG_CONFIG_1, val); + } + + cmac->instance->enabled |= which; + return 0; +} + +static int pm3393_enable_port(struct cmac *cmac, int which) +{ + /* Clear port statistics */ + pmwrite(cmac, SUNI1x10GEXP_REG_MSTAT_CONTROL, + SUNI1x10GEXP_BITMSK_MSTAT_CLEAR); + udelay(2); + memset(&cmac->stats, 0, sizeof(struct cmac_statistics)); + + pm3393_enable(cmac, which); + + /* + * XXX This should be done by the PHY and preferrably not at all. + * The PHY doesn't give us link status indication on its own so have + * the link management code query it instead. + */ + { + extern void link_changed(adapter_t *adapter, int port_id); + + link_changed(cmac->adapter, 0); + } + return 0; +} + +static int pm3393_disable(struct cmac *cmac, int which) +{ + if (which & MAC_DIRECTION_RX) + pmwrite(cmac, SUNI1x10GEXP_REG_RXXG_CONFIG_1, RXXG_CONF1_VAL); + if (which & MAC_DIRECTION_TX) + pmwrite(cmac, SUNI1x10GEXP_REG_TXXG_CONFIG_1, TXXG_CONF1_VAL); + + /* + * The disable is graceful. Give the PM3393 time. Can't wait very + * long here, we may be holding locks. + */ + udelay(20); + + cmac->instance->enabled &= ~which; + return 0; +} + +static int pm3393_loopback_enable(struct cmac *cmac) +{ + return 0; +} + +static int pm3393_loopback_disable(struct cmac *cmac) +{ + return 0; +} + +static int pm3393_set_mtu(struct cmac *cmac, int mtu) +{ + int enabled = cmac->instance->enabled; + + /* MAX_FRAME_SIZE includes header + FCS, mtu doesn't */ + mtu += 14 + 4; + if (mtu > MAX_FRAME_SIZE) + return -EINVAL; + + /* Disable Rx/Tx MAC before configuring it. */ + if (enabled) + pm3393_disable(cmac, MAC_DIRECTION_RX | MAC_DIRECTION_TX); + + pmwrite(cmac, SUNI1x10GEXP_REG_RXXG_MAX_FRAME_LENGTH, mtu); + pmwrite(cmac, SUNI1x10GEXP_REG_TXXG_MAX_FRAME_SIZE, mtu); + + if (enabled) + pm3393_enable(cmac, enabled); + return 0; +} + +static u32 calc_crc(u8 *b, int len) +{ + int i; + u32 crc = (u32)~0; + + /* calculate crc one bit at a time */ + while (len--) { + crc ^= *b++; + for (i = 0; i < 8; i++) { + if (crc & 0x1) + crc = (crc >> 1) ^ 0xedb88320; + else + crc = (crc >> 1); + } + } + + /* reverse bits */ + crc = ((crc >> 4) & 0x0f0f0f0f) | ((crc << 4) & 0xf0f0f0f0); + crc = ((crc >> 2) & 0x33333333) | ((crc << 2) & 0xcccccccc); + crc = ((crc >> 1) & 0x55555555) | ((crc << 1) & 0xaaaaaaaa); + /* swap bytes */ + crc = (crc >> 16) | (crc << 16); + crc = (crc >> 8 & 0x00ff00ff) | (crc << 8 & 0xff00ff00); + + return crc; +} + +static int pm3393_set_rx_mode(struct cmac *cmac, struct t1_rx_mode *rm) +{ + int enabled = cmac->instance->enabled & MAC_DIRECTION_RX; + u32 rx_mode; + + /* Disable MAC RX before reconfiguring it */ + if (enabled) + pm3393_disable(cmac, MAC_DIRECTION_RX); + + pmread(cmac, SUNI1x10GEXP_REG_RXXG_ADDRESS_FILTER_CONTROL_2, &rx_mode); + rx_mode &= ~(SUNI1x10GEXP_BITMSK_RXXG_PMODE | + SUNI1x10GEXP_BITMSK_RXXG_MHASH_EN); + pmwrite(cmac, SUNI1x10GEXP_REG_RXXG_ADDRESS_FILTER_CONTROL_2, + (u16)rx_mode); + + if (t1_rx_mode_promisc(rm)) { + /* Promiscuous mode. */ + rx_mode |= SUNI1x10GEXP_BITMSK_RXXG_PMODE; + } + if (t1_rx_mode_allmulti(rm)) { + /* Accept all multicast. */ + pmwrite(cmac, SUNI1x10GEXP_REG_RXXG_MULTICAST_HASH_LOW, 0xffff); + pmwrite(cmac, SUNI1x10GEXP_REG_RXXG_MULTICAST_HASH_MIDLOW, 0xffff); + pmwrite(cmac, SUNI1x10GEXP_REG_RXXG_MULTICAST_HASH_MIDHIGH, 0xffff); + pmwrite(cmac, SUNI1x10GEXP_REG_RXXG_MULTICAST_HASH_HIGH, 0xffff); + rx_mode |= SUNI1x10GEXP_BITMSK_RXXG_MHASH_EN; + } else if (t1_rx_mode_mc_cnt(rm)) { + /* Accept one or more multicast(s). */ + u8 *addr; + int bit; + u16 mc_filter[4] = { 0, }; + + while ((addr = t1_get_next_mcaddr(rm))) { + bit = (calc_crc(addr, ETH_ALEN) >> 23) & 0x3f; /* bit[23:28] */ + mc_filter[bit >> 4] |= 1 << (bit & 0xf); + } + pmwrite(cmac, SUNI1x10GEXP_REG_RXXG_MULTICAST_HASH_LOW, mc_filter[0]); + pmwrite(cmac, SUNI1x10GEXP_REG_RXXG_MULTICAST_HASH_MIDLOW, mc_filter[1]); + pmwrite(cmac, SUNI1x10GEXP_REG_RXXG_MULTICAST_HASH_MIDHIGH, mc_filter[2]); + pmwrite(cmac, SUNI1x10GEXP_REG_RXXG_MULTICAST_HASH_HIGH, mc_filter[3]); + rx_mode |= SUNI1x10GEXP_BITMSK_RXXG_MHASH_EN; + } + + pmwrite(cmac, SUNI1x10GEXP_REG_RXXG_ADDRESS_FILTER_CONTROL_2, (u16)rx_mode); + + if (enabled) + pm3393_enable(cmac, MAC_DIRECTION_RX); + + return 0; +} + +static int pm3393_get_speed_duplex_fc(struct cmac *cmac, int *speed, + int *duplex, int *fc) +{ + if (speed) + *speed = SPEED_10000; + if (duplex) + *duplex = DUPLEX_FULL; + if (fc) + *fc = cmac->instance->fc; + return 0; +} + +static int pm3393_set_speed_duplex_fc(struct cmac *cmac, int speed, int duplex, + int fc) +{ + if (speed >= 0 && speed != SPEED_10000) + return -1; + if (duplex >= 0 && duplex != DUPLEX_FULL) + return -1; + if (fc & ~(PAUSE_TX | PAUSE_RX)) + return -1; + + if (fc != cmac->instance->fc) { + cmac->instance->fc = (u8) fc; + if (cmac->instance->enabled & MAC_DIRECTION_TX) + pm3393_enable(cmac, MAC_DIRECTION_TX); + } + return 0; +} + +#define RMON_UPDATE(mac, name, stat_name) \ + { \ + t1_tpi_read((mac)->adapter, OFFSET(name), &val0); \ + t1_tpi_read((mac)->adapter, OFFSET(((name)+1)), &val1); \ + t1_tpi_read((mac)->adapter, OFFSET(((name)+2)), &val2); \ + (mac)->stats.stat_name = ((u64)val0 & 0xffff) | \ + (((u64)val1 & 0xffff) << 16) | \ + (((u64)val2 & 0xff) << 32) | \ + ((mac)->stats.stat_name & \ + (~(u64)0 << 40)); \ + if (ro & \ + ((name - SUNI1x10GEXP_REG_MSTAT_COUNTER_0_LOW) >> 2)) \ + (mac)->stats.stat_name += ((u64)1 << 40); \ + } + +static const struct cmac_statistics *pm3393_update_statistics(struct cmac *mac, + int flag) +{ + u64 ro; + u32 val0, val1, val2, val3; + + /* Snap the counters */ + pmwrite(mac, SUNI1x10GEXP_REG_MSTAT_CONTROL, + SUNI1x10GEXP_BITMSK_MSTAT_SNAP); + + /* Counter rollover, clear on read */ + pmread(mac, SUNI1x10GEXP_REG_MSTAT_COUNTER_ROLLOVER_0, &val0); + pmread(mac, SUNI1x10GEXP_REG_MSTAT_COUNTER_ROLLOVER_1, &val1); + pmread(mac, SUNI1x10GEXP_REG_MSTAT_COUNTER_ROLLOVER_2, &val2); + pmread(mac, SUNI1x10GEXP_REG_MSTAT_COUNTER_ROLLOVER_3, &val3); + ro = ((u64)val0 & 0xffff) | (((u64)val1 & 0xffff) << 16) | + (((u64)val2 & 0xffff) << 32) | (((u64)val3 & 0xffff) << 48); + + /* Rx stats */ + RMON_UPDATE(mac, RxOctetsReceivedOK, RxOctetsOK); + RMON_UPDATE(mac, RxUnicastFramesReceivedOK, RxUnicastFramesOK); + RMON_UPDATE(mac, RxMulticastFramesReceivedOK, RxMulticastFramesOK); + RMON_UPDATE(mac, RxBroadcastFramesReceivedOK, RxBroadcastFramesOK); + RMON_UPDATE(mac, RxPAUSEMACCtrlFramesReceived, RxPauseFrames); + RMON_UPDATE(mac, RxFrameCheckSequenceErrors, RxFCSErrors); + RMON_UPDATE(mac, RxFramesLostDueToInternalMACErrors, + RxInternalMACRcvError); + RMON_UPDATE(mac, RxSymbolErrors, RxSymbolErrors); + RMON_UPDATE(mac, RxInRangeLengthErrors, RxInRangeLengthErrors); + RMON_UPDATE(mac, RxFramesTooLongErrors , RxFrameTooLongErrors); + RMON_UPDATE(mac, RxJabbers, RxJabberErrors); + RMON_UPDATE(mac, RxFragments, RxRuntErrors); + RMON_UPDATE(mac, RxUndersizedFrames, RxRuntErrors); + + /* Tx stats */ + RMON_UPDATE(mac, TxOctetsTransmittedOK, TxOctetsOK); + RMON_UPDATE(mac, TxFramesLostDueToInternalMACTransmissionError, + TxInternalMACXmitError); + RMON_UPDATE(mac, TxTransmitSystemError, TxFCSErrors); + RMON_UPDATE(mac, TxUnicastFramesTransmittedOK, TxUnicastFramesOK); + RMON_UPDATE(mac, TxMulticastFramesTransmittedOK, TxMulticastFramesOK); + RMON_UPDATE(mac, TxBroadcastFramesTransmittedOK, TxBroadcastFramesOK); + RMON_UPDATE(mac, TxPAUSEMACCtrlFramesTransmitted, TxPauseFrames); + + return &mac->stats; +} + +static int pm3393_macaddress_get(struct cmac *cmac, u8 mac_addr[6]) +{ + memcpy(mac_addr, cmac->instance->mac_addr, 6); + return 0; +} + +static int pm3393_macaddress_set(struct cmac *cmac, u8 ma[6]) +{ + u32 val, lo, mid, hi, enabled = cmac->instance->enabled; + + /* + * MAC addr: 00:07:43:00:13:09 + * + * ma[5] = 0x09 + * ma[4] = 0x13 + * ma[3] = 0x00 + * ma[2] = 0x43 + * ma[1] = 0x07 + * ma[0] = 0x00 + * + * The PM3393 requires byte swapping and reverse order entry + * when programming MAC addresses: + * + * low_bits[15:0] = ma[1]:ma[0] + * mid_bits[31:16] = ma[3]:ma[2] + * high_bits[47:32] = ma[5]:ma[4] + */ + + /* Store local copy */ + memcpy(cmac->instance->mac_addr, ma, 6); + + lo = ((u32) ma[1] << 8) | (u32) ma[0]; + mid = ((u32) ma[3] << 8) | (u32) ma[2]; + hi = ((u32) ma[5] << 8) | (u32) ma[4]; + + /* Disable Rx/Tx MAC before configuring it. */ + if (enabled) + pm3393_disable(cmac, MAC_DIRECTION_RX | MAC_DIRECTION_TX); + + /* Set RXXG Station Address */ + pmwrite(cmac, SUNI1x10GEXP_REG_RXXG_SA_15_0, lo); + pmwrite(cmac, SUNI1x10GEXP_REG_RXXG_SA_31_16, mid); + pmwrite(cmac, SUNI1x10GEXP_REG_RXXG_SA_47_32, hi); + + /* Set TXXG Station Address */ + pmwrite(cmac, SUNI1x10GEXP_REG_TXXG_SA_15_0, lo); + pmwrite(cmac, SUNI1x10GEXP_REG_TXXG_SA_31_16, mid); + pmwrite(cmac, SUNI1x10GEXP_REG_TXXG_SA_47_32, hi); + + /* Setup Exact Match Filter 1 with our MAC address + * + * Must disable exact match filter before configuring it. + */ + pmread(cmac, SUNI1x10GEXP_REG_RXXG_ADDRESS_FILTER_CONTROL_0, &val); + val &= 0xff0f; + pmwrite(cmac, SUNI1x10GEXP_REG_RXXG_ADDRESS_FILTER_CONTROL_0, val); + + pmwrite(cmac, SUNI1x10GEXP_REG_RXXG_EXACT_MATCH_ADDR_1_LOW, lo); + pmwrite(cmac, SUNI1x10GEXP_REG_RXXG_EXACT_MATCH_ADDR_1_MID, mid); + pmwrite(cmac, SUNI1x10GEXP_REG_RXXG_EXACT_MATCH_ADDR_1_HIGH, hi); + + val |= 0x0090; + pmwrite(cmac, SUNI1x10GEXP_REG_RXXG_ADDRESS_FILTER_CONTROL_0, val); + + if (enabled) + pm3393_enable(cmac, enabled); + return 0; +} + +static void pm3393_destroy(struct cmac *cmac) +{ + kfree(cmac); +} + +static struct cmac_ops pm3393_ops = { + .destroy = pm3393_destroy, + .reset = pm3393_reset, + .interrupt_enable = pm3393_interrupt_enable, + .interrupt_disable = pm3393_interrupt_disable, + .interrupt_clear = pm3393_interrupt_clear, + .interrupt_handler = pm3393_interrupt_handler, + .enable = pm3393_enable_port, + .disable = pm3393_disable, + .loopback_enable = pm3393_loopback_enable, + .loopback_disable = pm3393_loopback_disable, + .set_mtu = pm3393_set_mtu, + .set_rx_mode = pm3393_set_rx_mode, + .get_speed_duplex_fc = pm3393_get_speed_duplex_fc, + .set_speed_duplex_fc = pm3393_set_speed_duplex_fc, + .statistics_update = pm3393_update_statistics, + .macaddress_get = pm3393_macaddress_get, + .macaddress_set = pm3393_macaddress_set +}; + +static struct cmac *pm3393_mac_create(adapter_t *adapter, int index) +{ + struct cmac *cmac; + + cmac = kmalloc(sizeof(*cmac) + sizeof(cmac_instance), GFP_KERNEL); + if (!cmac) + return NULL; + memset(cmac, 0, sizeof(*cmac)); + + cmac->ops = &pm3393_ops; + cmac->instance = (cmac_instance *) (cmac + 1); + cmac->adapter = adapter; + cmac->instance->fc = PAUSE_TX | PAUSE_RX; + + t1_tpi_write(adapter, OFFSET(0x0001), 0x00008000); + t1_tpi_write(adapter, OFFSET(0x0001), 0x00000000); + t1_tpi_write(adapter, OFFSET(0x2308), 0x00009800); + t1_tpi_write(adapter, OFFSET(0x2305), 0x00001001); /* PL4IO Enable */ + t1_tpi_write(adapter, OFFSET(0x2320), 0x00008800); + t1_tpi_write(adapter, OFFSET(0x2321), 0x00008800); + t1_tpi_write(adapter, OFFSET(0x2322), 0x00008800); + t1_tpi_write(adapter, OFFSET(0x2323), 0x00008800); + t1_tpi_write(adapter, OFFSET(0x2324), 0x00008800); + t1_tpi_write(adapter, OFFSET(0x2325), 0x00008800); + t1_tpi_write(adapter, OFFSET(0x2326), 0x00008800); + t1_tpi_write(adapter, OFFSET(0x2327), 0x00008800); + t1_tpi_write(adapter, OFFSET(0x2328), 0x00008800); + t1_tpi_write(adapter, OFFSET(0x2329), 0x00008800); + t1_tpi_write(adapter, OFFSET(0x232a), 0x00008800); + t1_tpi_write(adapter, OFFSET(0x232b), 0x00008800); + t1_tpi_write(adapter, OFFSET(0x232c), 0x00008800); + t1_tpi_write(adapter, OFFSET(0x232d), 0x00008800); + t1_tpi_write(adapter, OFFSET(0x232e), 0x00008800); + t1_tpi_write(adapter, OFFSET(0x232f), 0x00008800); + t1_tpi_write(adapter, OFFSET(0x230d), 0x00009c00); + t1_tpi_write(adapter, OFFSET(0x2304), 0x00000202); /* PL4IO Calendar Repetitions */ + + t1_tpi_write(adapter, OFFSET(0x3200), 0x00008080); /* EFLX Enable */ + t1_tpi_write(adapter, OFFSET(0x3210), 0x00000000); /* EFLX Channel Deprovision */ + t1_tpi_write(adapter, OFFSET(0x3203), 0x00000000); /* EFLX Low Limit */ + t1_tpi_write(adapter, OFFSET(0x3204), 0x00000040); /* EFLX High Limit */ + t1_tpi_write(adapter, OFFSET(0x3205), 0x000002cc); /* EFLX Almost Full */ + t1_tpi_write(adapter, OFFSET(0x3206), 0x00000199); /* EFLX Almost Empty */ + t1_tpi_write(adapter, OFFSET(0x3207), 0x00000240); /* EFLX Cut Through Threshold */ + t1_tpi_write(adapter, OFFSET(0x3202), 0x00000000); /* EFLX Indirect Register Update */ + t1_tpi_write(adapter, OFFSET(0x3210), 0x00000001); /* EFLX Channel Provision */ + t1_tpi_write(adapter, OFFSET(0x3208), 0x0000ffff); /* EFLX Undocumented */ + t1_tpi_write(adapter, OFFSET(0x320a), 0x0000ffff); /* EFLX Undocumented */ + t1_tpi_write(adapter, OFFSET(0x320c), 0x0000ffff); /* EFLX enable overflow interrupt The other bit are undocumented */ + t1_tpi_write(adapter, OFFSET(0x320e), 0x0000ffff); /* EFLX Undocumented */ + + t1_tpi_write(adapter, OFFSET(0x2200), 0x0000c000); /* IFLX Configuration - enable */ + t1_tpi_write(adapter, OFFSET(0x2201), 0x00000000); /* IFLX Channel Deprovision */ + t1_tpi_write(adapter, OFFSET(0x220e), 0x00000000); /* IFLX Low Limit */ + t1_tpi_write(adapter, OFFSET(0x220f), 0x00000100); /* IFLX High Limit */ + t1_tpi_write(adapter, OFFSET(0x2210), 0x00000c00); /* IFLX Almost Full Limit */ + t1_tpi_write(adapter, OFFSET(0x2211), 0x00000599); /* IFLX Almost Empty Limit */ + t1_tpi_write(adapter, OFFSET(0x220d), 0x00000000); /* IFLX Indirect Register Update */ + t1_tpi_write(adapter, OFFSET(0x2201), 0x00000001); /* IFLX Channel Provision */ + t1_tpi_write(adapter, OFFSET(0x2203), 0x0000ffff); /* IFLX Undocumented */ + t1_tpi_write(adapter, OFFSET(0x2205), 0x0000ffff); /* IFLX Undocumented */ + t1_tpi_write(adapter, OFFSET(0x2209), 0x0000ffff); /* IFLX Enable overflow interrupt. The other bit are undocumented */ + + t1_tpi_write(adapter, OFFSET(0x2241), 0xfffffffe); /* PL4MOS Undocumented */ + t1_tpi_write(adapter, OFFSET(0x2242), 0x0000ffff); /* PL4MOS Undocumented */ + t1_tpi_write(adapter, OFFSET(0x2243), 0x00000008); /* PL4MOS Starving Burst Size */ + t1_tpi_write(adapter, OFFSET(0x2244), 0x00000008); /* PL4MOS Hungry Burst Size */ + t1_tpi_write(adapter, OFFSET(0x2245), 0x00000008); /* PL4MOS Transfer Size */ + t1_tpi_write(adapter, OFFSET(0x2240), 0x00000005); /* PL4MOS Disable */ + + t1_tpi_write(adapter, OFFSET(0x2280), 0x00002103); /* PL4ODP Training Repeat and SOP rule */ + t1_tpi_write(adapter, OFFSET(0x2284), 0x00000000); /* PL4ODP MAX_T setting */ + + t1_tpi_write(adapter, OFFSET(0x3280), 0x00000087); /* PL4IDU Enable data forward, port state machine. Set ALLOW_NON_ZERO_OLB */ + t1_tpi_write(adapter, OFFSET(0x3282), 0x0000001f); /* PL4IDU Enable Dip4 check error interrupts */ + + t1_tpi_write(adapter, OFFSET(0x3040), 0x0c32); /* # TXXG Config */ + /* For T1 use timer based Mac flow control. */ + if (t1_is_T1B(adapter)) + t1_tpi_write(adapter, OFFSET(0x304d), 0x8000); + t1_tpi_write(adapter, OFFSET(0x2040), 0x059c); /* # RXXG Config */ + t1_tpi_write(adapter, OFFSET(0x2049), 0x0000); /* # RXXG Cut Through */ + t1_tpi_write(adapter, OFFSET(0x2070), 0x0000); /* # Disable promiscuous mode */ + + /* Setup Exact Match Filter 0 to allow broadcast packets. + */ + t1_tpi_write(adapter, OFFSET(0x206e), 0x0000); /* # Disable Match Enable bit */ + t1_tpi_write(adapter, OFFSET(0x204a), 0xffff); /* # low addr */ + t1_tpi_write(adapter, OFFSET(0x204b), 0xffff); /* # mid addr */ + t1_tpi_write(adapter, OFFSET(0x204c), 0xffff); /* # high addr */ + t1_tpi_write(adapter, OFFSET(0x206e), 0x0009); /* # Enable Match Enable bit */ + + t1_tpi_write(adapter, OFFSET(0x0003), 0x0000); /* # NO SOP/ PAD_EN setup */ + t1_tpi_write(adapter, OFFSET(0x0100), 0x0ff0); /* # RXEQB disabled */ + t1_tpi_write(adapter, OFFSET(0x0101), 0x0f0f); /* # No Preemphasis */ + + return cmac; +} + +static int pm3393_mac_reset(adapter_t * adapter) +{ + u32 val; + u32 x; + u32 is_pl4_reset_finished; + u32 is_pl4_outof_lock; + u32 is_xaui_mabc_pll_locked; + u32 successful_reset; + int i; + + /* The following steps are required to properly reset + * the PM3393. This information is provided in the + * PM3393 datasheet (Issue 2: November 2002) + * section 13.1 -- Device Reset. + * + * The PM3393 has three types of components that are + * individually reset: + * + * DRESETB - Digital circuitry + * PL4_ARESETB - PL4 analog circuitry + * XAUI_ARESETB - XAUI bus analog circuitry + * + * Steps to reset PM3393 using RSTB pin: + * + * 1. Assert RSTB pin low ( write 0 ) + * 2. Wait at least 1ms to initiate a complete initialization of device. + * 3. Wait until all external clocks and REFSEL are stable. + * 4. Wait minimum of 1ms. (after external clocks and REFEL are stable) + * 5. De-assert RSTB ( write 1 ) + * 6. Wait until internal timers to expires after ~14ms. + * - Allows analog clock synthesizer(PL4CSU) to stabilize to + * selected reference frequency before allowing the digital + * portion of the device to operate. + * 7. Wait at least 200us for XAUI interface to stabilize. + * 8. Verify the PM3393 came out of reset successfully. + * Set successful reset flag if everything worked else try again + * a few more times. + */ + + successful_reset = 0; + for (i = 0; i < 3 && !successful_reset; i++) { + /* 1 */ + t1_tpi_read(adapter, A_ELMER0_GPO, &val); + val &= ~1; + t1_tpi_write(adapter, A_ELMER0_GPO, val); + + /* 2 */ + msleep(1); + + /* 3 */ + msleep(1); + + /* 4 */ + msleep(2 /*1 extra ms for safety */ ); + + /* 5 */ + val |= 1; + t1_tpi_write(adapter, A_ELMER0_GPO, val); + + /* 6 */ + msleep(15 /*1 extra ms for safety */ ); + + /* 7 */ + msleep(1); + + /* 8 */ + + /* Has PL4 analog block come out of reset correctly? */ + t1_tpi_read(adapter, OFFSET(SUNI1x10GEXP_REG_DEVICE_STATUS), &val); + is_pl4_reset_finished = (val & SUNI1x10GEXP_BITMSK_TOP_EXPIRED); + + /* TBD XXX SUNI1x10GEXP_BITMSK_TOP_PL4_IS_DOOL gets locked later in the init sequence + * figure out why? */ + + /* Have all PL4 block clocks locked? */ + x = (SUNI1x10GEXP_BITMSK_TOP_PL4_ID_DOOL + /*| SUNI1x10GEXP_BITMSK_TOP_PL4_IS_DOOL */ | + SUNI1x10GEXP_BITMSK_TOP_PL4_ID_ROOL | + SUNI1x10GEXP_BITMSK_TOP_PL4_IS_ROOL | + SUNI1x10GEXP_BITMSK_TOP_PL4_OUT_ROOL); + is_pl4_outof_lock = (val & x); + + /* ??? If this fails, might be able to software reset the XAUI part + * and try to recover... thus saving us from doing another HW reset */ + /* Has the XAUI MABC PLL circuitry stablized? */ + is_xaui_mabc_pll_locked = + (val & SUNI1x10GEXP_BITMSK_TOP_SXRA_EXPIRED); + + successful_reset = (is_pl4_reset_finished && !is_pl4_outof_lock + && is_xaui_mabc_pll_locked); + + CH_DBG(adapter, HW, + "PM3393 HW reset %d: pl4_reset 0x%x, val 0x%x, " + "is_pl4_outof_lock 0x%x, xaui_locked 0x%x\n", + i, is_pl4_reset_finished, val, is_pl4_outof_lock, + is_xaui_mabc_pll_locked); + } + return successful_reset ? 0 : 1; +} + +struct gmac t1_pm3393_ops = { + STATS_TICK_SECS, + pm3393_mac_create, + pm3393_mac_reset +}; diff --git a/drivers/net/chelsio/regs.h b/drivers/net/chelsio/regs.h new file mode 100644 index 00000000000..5a70803eb1b --- /dev/null +++ b/drivers/net/chelsio/regs.h @@ -0,0 +1,453 @@ +/***************************************************************************** + * * + * File: regs.h * + * $Revision: 1.4 $ * + * $Date: 2005/03/23 07:15:59 $ * + * Description: * + * part of the Chelsio 10Gb Ethernet Driver. * + * * + * This program is free software; you can redistribute it and/or modify * + * it under the terms of the GNU General Public License, version 2, as * + * published by the Free Software Foundation. * + * * + * You should have received a copy of the GNU General Public License along * + * with this program; if not, write to the Free Software Foundation, Inc., * + * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. * + * * + * THIS SOFTWARE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR IMPLIED * + * WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED WARRANTIES OF * + * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. * + * * + * http://www.chelsio.com * + * * + * Copyright (c) 2003 - 2005 Chelsio Communications, Inc. * + * All rights reserved. * + * * + * Maintainers: maintainers@chelsio.com * + * * + * Authors: Dimitrios Michailidis * + * Tina Yang * + * Felix Marti * + * Scott Bardone * + * Kurt Ottaway * + * Frank DiMambro * + * * + * History: * + * * + ****************************************************************************/ + +/* Do not edit this file */ + +/* SGE registers */ +#define A_SG_CONTROL 0x0 + +#define S_CMDQ0_ENABLE 0 +#define V_CMDQ0_ENABLE(x) ((x) << S_CMDQ0_ENABLE) +#define F_CMDQ0_ENABLE V_CMDQ0_ENABLE(1U) + +#define S_CMDQ1_ENABLE 1 +#define V_CMDQ1_ENABLE(x) ((x) << S_CMDQ1_ENABLE) +#define F_CMDQ1_ENABLE V_CMDQ1_ENABLE(1U) + +#define S_FL0_ENABLE 2 +#define V_FL0_ENABLE(x) ((x) << S_FL0_ENABLE) +#define F_FL0_ENABLE V_FL0_ENABLE(1U) + +#define S_FL1_ENABLE 3 +#define V_FL1_ENABLE(x) ((x) << S_FL1_ENABLE) +#define F_FL1_ENABLE V_FL1_ENABLE(1U) + +#define S_CPL_ENABLE 4 +#define V_CPL_ENABLE(x) ((x) << S_CPL_ENABLE) +#define F_CPL_ENABLE V_CPL_ENABLE(1U) + +#define S_RESPONSE_QUEUE_ENABLE 5 +#define V_RESPONSE_QUEUE_ENABLE(x) ((x) << S_RESPONSE_QUEUE_ENABLE) +#define F_RESPONSE_QUEUE_ENABLE V_RESPONSE_QUEUE_ENABLE(1U) + +#define S_CMDQ_PRIORITY 6 +#define M_CMDQ_PRIORITY 0x3 +#define V_CMDQ_PRIORITY(x) ((x) << S_CMDQ_PRIORITY) +#define G_CMDQ_PRIORITY(x) (((x) >> S_CMDQ_PRIORITY) & M_CMDQ_PRIORITY) + +#define S_DISABLE_CMDQ1_GTS 9 +#define V_DISABLE_CMDQ1_GTS(x) ((x) << S_DISABLE_CMDQ1_GTS) +#define F_DISABLE_CMDQ1_GTS V_DISABLE_CMDQ1_GTS(1U) + +#define S_ENABLE_BIG_ENDIAN 12 +#define V_ENABLE_BIG_ENDIAN(x) ((x) << S_ENABLE_BIG_ENDIAN) +#define F_ENABLE_BIG_ENDIAN V_ENABLE_BIG_ENDIAN(1U) + +#define S_ISCSI_COALESCE 14 +#define V_ISCSI_COALESCE(x) ((x) << S_ISCSI_COALESCE) +#define F_ISCSI_COALESCE V_ISCSI_COALESCE(1U) + +#define S_RX_PKT_OFFSET 15 +#define V_RX_PKT_OFFSET(x) ((x) << S_RX_PKT_OFFSET) + +#define S_VLAN_XTRACT 18 +#define V_VLAN_XTRACT(x) ((x) << S_VLAN_XTRACT) +#define F_VLAN_XTRACT V_VLAN_XTRACT(1U) + +#define A_SG_DOORBELL 0x4 +#define A_SG_CMD0BASELWR 0x8 +#define A_SG_CMD0BASEUPR 0xc +#define A_SG_CMD1BASELWR 0x10 +#define A_SG_CMD1BASEUPR 0x14 +#define A_SG_FL0BASELWR 0x18 +#define A_SG_FL0BASEUPR 0x1c +#define A_SG_FL1BASELWR 0x20 +#define A_SG_FL1BASEUPR 0x24 +#define A_SG_CMD0SIZE 0x28 +#define A_SG_FL0SIZE 0x2c +#define A_SG_RSPSIZE 0x30 +#define A_SG_RSPBASELWR 0x34 +#define A_SG_RSPBASEUPR 0x38 +#define A_SG_FLTHRESHOLD 0x3c +#define A_SG_RSPQUEUECREDIT 0x40 +#define A_SG_SLEEPING 0x48 +#define A_SG_INTRTIMER 0x4c +#define A_SG_CMD1SIZE 0xb0 +#define A_SG_FL1SIZE 0xb4 +#define A_SG_INT_ENABLE 0xb8 + +#define S_RESPQ_EXHAUSTED 0 +#define V_RESPQ_EXHAUSTED(x) ((x) << S_RESPQ_EXHAUSTED) +#define F_RESPQ_EXHAUSTED V_RESPQ_EXHAUSTED(1U) + +#define S_RESPQ_OVERFLOW 1 +#define V_RESPQ_OVERFLOW(x) ((x) << S_RESPQ_OVERFLOW) +#define F_RESPQ_OVERFLOW V_RESPQ_OVERFLOW(1U) + +#define S_FL_EXHAUSTED 2 +#define V_FL_EXHAUSTED(x) ((x) << S_FL_EXHAUSTED) +#define F_FL_EXHAUSTED V_FL_EXHAUSTED(1U) + +#define S_PACKET_TOO_BIG 3 +#define V_PACKET_TOO_BIG(x) ((x) << S_PACKET_TOO_BIG) +#define F_PACKET_TOO_BIG V_PACKET_TOO_BIG(1U) + +#define S_PACKET_MISMATCH 4 +#define V_PACKET_MISMATCH(x) ((x) << S_PACKET_MISMATCH) +#define F_PACKET_MISMATCH V_PACKET_MISMATCH(1U) + +#define A_SG_INT_CAUSE 0xbc + +/* MC3 registers */ + +#define S_READY 1 +#define V_READY(x) ((x) << S_READY) +#define F_READY V_READY(1U) + +/* MC4 registers */ + +#define A_MC4_CFG 0x180 +#define S_MC4_SLOW 25 +#define V_MC4_SLOW(x) ((x) << S_MC4_SLOW) +#define F_MC4_SLOW V_MC4_SLOW(1U) + +/* TPI registers */ + +#define A_TPI_ADDR 0x280 +#define A_TPI_WR_DATA 0x284 +#define A_TPI_RD_DATA 0x288 +#define A_TPI_CSR 0x28c + +#define S_TPIWR 0 +#define V_TPIWR(x) ((x) << S_TPIWR) +#define F_TPIWR V_TPIWR(1U) + +#define S_TPIRDY 1 +#define V_TPIRDY(x) ((x) << S_TPIRDY) +#define F_TPIRDY V_TPIRDY(1U) + +#define A_TPI_PAR 0x29c + +#define S_TPIPAR 0 +#define M_TPIPAR 0x7f +#define V_TPIPAR(x) ((x) << S_TPIPAR) +#define G_TPIPAR(x) (((x) >> S_TPIPAR) & M_TPIPAR) + +/* TP registers */ + +#define A_TP_IN_CONFIG 0x300 + +#define S_TP_IN_CSPI_CPL 3 +#define V_TP_IN_CSPI_CPL(x) ((x) << S_TP_IN_CSPI_CPL) +#define F_TP_IN_CSPI_CPL V_TP_IN_CSPI_CPL(1U) + +#define S_TP_IN_CSPI_CHECK_IP_CSUM 5 +#define V_TP_IN_CSPI_CHECK_IP_CSUM(x) ((x) << S_TP_IN_CSPI_CHECK_IP_CSUM) +#define F_TP_IN_CSPI_CHECK_IP_CSUM V_TP_IN_CSPI_CHECK_IP_CSUM(1U) + +#define S_TP_IN_CSPI_CHECK_TCP_CSUM 6 +#define V_TP_IN_CSPI_CHECK_TCP_CSUM(x) ((x) << S_TP_IN_CSPI_CHECK_TCP_CSUM) +#define F_TP_IN_CSPI_CHECK_TCP_CSUM V_TP_IN_CSPI_CHECK_TCP_CSUM(1U) + +#define S_TP_IN_ESPI_ETHERNET 8 +#define V_TP_IN_ESPI_ETHERNET(x) ((x) << S_TP_IN_ESPI_ETHERNET) +#define F_TP_IN_ESPI_ETHERNET V_TP_IN_ESPI_ETHERNET(1U) + +#define S_TP_IN_ESPI_CHECK_IP_CSUM 12 +#define V_TP_IN_ESPI_CHECK_IP_CSUM(x) ((x) << S_TP_IN_ESPI_CHECK_IP_CSUM) +#define F_TP_IN_ESPI_CHECK_IP_CSUM V_TP_IN_ESPI_CHECK_IP_CSUM(1U) + +#define S_TP_IN_ESPI_CHECK_TCP_CSUM 13 +#define V_TP_IN_ESPI_CHECK_TCP_CSUM(x) ((x) << S_TP_IN_ESPI_CHECK_TCP_CSUM) +#define F_TP_IN_ESPI_CHECK_TCP_CSUM V_TP_IN_ESPI_CHECK_TCP_CSUM(1U) + +#define S_OFFLOAD_DISABLE 14 +#define V_OFFLOAD_DISABLE(x) ((x) << S_OFFLOAD_DISABLE) +#define F_OFFLOAD_DISABLE V_OFFLOAD_DISABLE(1U) + +#define A_TP_OUT_CONFIG 0x304 + +#define S_TP_OUT_CSPI_CPL 2 +#define V_TP_OUT_CSPI_CPL(x) ((x) << S_TP_OUT_CSPI_CPL) +#define F_TP_OUT_CSPI_CPL V_TP_OUT_CSPI_CPL(1U) + +#define S_TP_OUT_ESPI_ETHERNET 6 +#define V_TP_OUT_ESPI_ETHERNET(x) ((x) << S_TP_OUT_ESPI_ETHERNET) +#define F_TP_OUT_ESPI_ETHERNET V_TP_OUT_ESPI_ETHERNET(1U) + +#define S_TP_OUT_ESPI_GENERATE_IP_CSUM 10 +#define V_TP_OUT_ESPI_GENERATE_IP_CSUM(x) ((x) << S_TP_OUT_ESPI_GENERATE_IP_CSUM) +#define F_TP_OUT_ESPI_GENERATE_IP_CSUM V_TP_OUT_ESPI_GENERATE_IP_CSUM(1U) + +#define S_TP_OUT_ESPI_GENERATE_TCP_CSUM 11 +#define V_TP_OUT_ESPI_GENERATE_TCP_CSUM(x) ((x) << S_TP_OUT_ESPI_GENERATE_TCP_CSUM) +#define F_TP_OUT_ESPI_GENERATE_TCP_CSUM V_TP_OUT_ESPI_GENERATE_TCP_CSUM(1U) + +#define A_TP_GLOBAL_CONFIG 0x308 + +#define S_IP_TTL 0 +#define M_IP_TTL 0xff +#define V_IP_TTL(x) ((x) << S_IP_TTL) + +#define S_TCP_CSUM 11 +#define V_TCP_CSUM(x) ((x) << S_TCP_CSUM) +#define F_TCP_CSUM V_TCP_CSUM(1U) + +#define S_UDP_CSUM 12 +#define V_UDP_CSUM(x) ((x) << S_UDP_CSUM) +#define F_UDP_CSUM V_UDP_CSUM(1U) + +#define S_IP_CSUM 13 +#define V_IP_CSUM(x) ((x) << S_IP_CSUM) +#define F_IP_CSUM V_IP_CSUM(1U) + +#define S_PATH_MTU 15 +#define V_PATH_MTU(x) ((x) << S_PATH_MTU) +#define F_PATH_MTU V_PATH_MTU(1U) + +#define S_5TUPLE_LOOKUP 17 +#define V_5TUPLE_LOOKUP(x) ((x) << S_5TUPLE_LOOKUP) + +#define S_SYN_COOKIE_PARAMETER 26 +#define V_SYN_COOKIE_PARAMETER(x) ((x) << S_SYN_COOKIE_PARAMETER) + +#define A_TP_PC_CONFIG 0x348 +#define S_TP_PC_REV 30 +#define M_TP_PC_REV 0x3 +#define G_TP_PC_REV(x) (((x) >> S_TP_PC_REV) & M_TP_PC_REV) +#define A_TP_RESET 0x44c +#define S_TP_RESET 0 +#define V_TP_RESET(x) ((x) << S_TP_RESET) +#define F_TP_RESET V_TP_RESET(1U) + +#define A_TP_INT_ENABLE 0x470 +#define A_TP_INT_CAUSE 0x474 +#define A_TP_TX_DROP_CONFIG 0x4b8 + +#define S_ENABLE_TX_DROP 31 +#define V_ENABLE_TX_DROP(x) ((x) << S_ENABLE_TX_DROP) +#define F_ENABLE_TX_DROP V_ENABLE_TX_DROP(1U) + +#define S_ENABLE_TX_ERROR 30 +#define V_ENABLE_TX_ERROR(x) ((x) << S_ENABLE_TX_ERROR) +#define F_ENABLE_TX_ERROR V_ENABLE_TX_ERROR(1U) + +#define S_DROP_TICKS_CNT 4 +#define V_DROP_TICKS_CNT(x) ((x) << S_DROP_TICKS_CNT) + +#define S_NUM_PKTS_DROPPED 0 +#define V_NUM_PKTS_DROPPED(x) ((x) << S_NUM_PKTS_DROPPED) + +/* CSPI registers */ + +#define S_DIP4ERR 0 +#define V_DIP4ERR(x) ((x) << S_DIP4ERR) +#define F_DIP4ERR V_DIP4ERR(1U) + +#define S_RXDROP 1 +#define V_RXDROP(x) ((x) << S_RXDROP) +#define F_RXDROP V_RXDROP(1U) + +#define S_TXDROP 2 +#define V_TXDROP(x) ((x) << S_TXDROP) +#define F_TXDROP V_TXDROP(1U) + +#define S_RXOVERFLOW 3 +#define V_RXOVERFLOW(x) ((x) << S_RXOVERFLOW) +#define F_RXOVERFLOW V_RXOVERFLOW(1U) + +#define S_RAMPARITYERR 4 +#define V_RAMPARITYERR(x) ((x) << S_RAMPARITYERR) +#define F_RAMPARITYERR V_RAMPARITYERR(1U) + +/* ESPI registers */ + +#define A_ESPI_SCH_TOKEN0 0x880 +#define A_ESPI_SCH_TOKEN1 0x884 +#define A_ESPI_SCH_TOKEN2 0x888 +#define A_ESPI_SCH_TOKEN3 0x88c +#define A_ESPI_RX_FIFO_ALMOST_EMPTY_WATERMARK 0x890 +#define A_ESPI_RX_FIFO_ALMOST_FULL_WATERMARK 0x894 +#define A_ESPI_CALENDAR_LENGTH 0x898 +#define A_PORT_CONFIG 0x89c + +#define S_RX_NPORTS 0 +#define V_RX_NPORTS(x) ((x) << S_RX_NPORTS) + +#define S_TX_NPORTS 8 +#define V_TX_NPORTS(x) ((x) << S_TX_NPORTS) + +#define A_ESPI_FIFO_STATUS_ENABLE 0x8a0 + +#define S_RXSTATUSENABLE 0 +#define V_RXSTATUSENABLE(x) ((x) << S_RXSTATUSENABLE) +#define F_RXSTATUSENABLE V_RXSTATUSENABLE(1U) + +#define S_INTEL1010MODE 4 +#define V_INTEL1010MODE(x) ((x) << S_INTEL1010MODE) +#define F_INTEL1010MODE V_INTEL1010MODE(1U) + +#define A_ESPI_MAXBURST1_MAXBURST2 0x8a8 +#define A_ESPI_TRAIN 0x8ac +#define A_ESPI_INTR_STATUS 0x8c8 + +#define S_DIP2PARITYERR 5 +#define V_DIP2PARITYERR(x) ((x) << S_DIP2PARITYERR) +#define F_DIP2PARITYERR V_DIP2PARITYERR(1U) + +#define A_ESPI_INTR_ENABLE 0x8cc +#define A_RX_DROP_THRESHOLD 0x8d0 +#define A_ESPI_RX_RESET 0x8ec +#define A_ESPI_MISC_CONTROL 0x8f0 + +#define S_OUT_OF_SYNC_COUNT 0 +#define V_OUT_OF_SYNC_COUNT(x) ((x) << S_OUT_OF_SYNC_COUNT) + +#define S_DIP2_PARITY_ERR_THRES 5 +#define V_DIP2_PARITY_ERR_THRES(x) ((x) << S_DIP2_PARITY_ERR_THRES) + +#define S_DIP4_THRES 9 +#define V_DIP4_THRES(x) ((x) << S_DIP4_THRES) + +#define S_MONITORED_PORT_NUM 25 +#define V_MONITORED_PORT_NUM(x) ((x) << S_MONITORED_PORT_NUM) + +#define S_MONITORED_DIRECTION 27 +#define V_MONITORED_DIRECTION(x) ((x) << S_MONITORED_DIRECTION) +#define F_MONITORED_DIRECTION V_MONITORED_DIRECTION(1U) + +#define S_MONITORED_INTERFACE 28 +#define V_MONITORED_INTERFACE(x) ((x) << S_MONITORED_INTERFACE) +#define F_MONITORED_INTERFACE V_MONITORED_INTERFACE(1U) + +#define A_ESPI_DIP2_ERR_COUNT 0x8f4 +#define A_ESPI_CMD_ADDR 0x8f8 + +#define S_WRITE_DATA 0 +#define V_WRITE_DATA(x) ((x) << S_WRITE_DATA) + +#define S_REGISTER_OFFSET 8 +#define V_REGISTER_OFFSET(x) ((x) << S_REGISTER_OFFSET) + +#define S_CHANNEL_ADDR 12 +#define V_CHANNEL_ADDR(x) ((x) << S_CHANNEL_ADDR) + +#define S_MODULE_ADDR 16 +#define V_MODULE_ADDR(x) ((x) << S_MODULE_ADDR) + +#define S_BUNDLE_ADDR 20 +#define V_BUNDLE_ADDR(x) ((x) << S_BUNDLE_ADDR) + +#define S_SPI4_COMMAND 24 +#define V_SPI4_COMMAND(x) ((x) << S_SPI4_COMMAND) + +#define A_ESPI_GOSTAT 0x8fc +#define S_ESPI_CMD_BUSY 8 +#define V_ESPI_CMD_BUSY(x) ((x) << S_ESPI_CMD_BUSY) +#define F_ESPI_CMD_BUSY V_ESPI_CMD_BUSY(1U) + +/* PL registers */ + +#define A_PL_ENABLE 0xa00 + +#define S_PL_INTR_SGE_ERR 0 +#define V_PL_INTR_SGE_ERR(x) ((x) << S_PL_INTR_SGE_ERR) +#define F_PL_INTR_SGE_ERR V_PL_INTR_SGE_ERR(1U) + +#define S_PL_INTR_SGE_DATA 1 +#define V_PL_INTR_SGE_DATA(x) ((x) << S_PL_INTR_SGE_DATA) +#define F_PL_INTR_SGE_DATA V_PL_INTR_SGE_DATA(1U) + +#define S_PL_INTR_TP 6 +#define V_PL_INTR_TP(x) ((x) << S_PL_INTR_TP) +#define F_PL_INTR_TP V_PL_INTR_TP(1U) + +#define S_PL_INTR_ESPI 8 +#define V_PL_INTR_ESPI(x) ((x) << S_PL_INTR_ESPI) +#define F_PL_INTR_ESPI V_PL_INTR_ESPI(1U) + +#define S_PL_INTR_PCIX 10 +#define V_PL_INTR_PCIX(x) ((x) << S_PL_INTR_PCIX) +#define F_PL_INTR_PCIX V_PL_INTR_PCIX(1U) + +#define S_PL_INTR_EXT 11 +#define V_PL_INTR_EXT(x) ((x) << S_PL_INTR_EXT) +#define F_PL_INTR_EXT V_PL_INTR_EXT(1U) + +#define A_PL_CAUSE 0xa04 + +/* MC5 registers */ + +#define A_MC5_CONFIG 0xc04 + +#define S_TCAM_RESET 1 +#define V_TCAM_RESET(x) ((x) << S_TCAM_RESET) +#define F_TCAM_RESET V_TCAM_RESET(1U) + +#define S_M_BUS_ENABLE 5 +#define V_M_BUS_ENABLE(x) ((x) << S_M_BUS_ENABLE) +#define F_M_BUS_ENABLE V_M_BUS_ENABLE(1U) + +/* PCICFG registers */ + +#define A_PCICFG_PM_CSR 0x44 +#define A_PCICFG_VPD_ADDR 0x4a + +#define S_VPD_OP_FLAG 15 +#define V_VPD_OP_FLAG(x) ((x) << S_VPD_OP_FLAG) +#define F_VPD_OP_FLAG V_VPD_OP_FLAG(1U) + +#define A_PCICFG_VPD_DATA 0x4c + +#define A_PCICFG_INTR_ENABLE 0xf4 +#define A_PCICFG_INTR_CAUSE 0xf8 + +#define A_PCICFG_MODE 0xfc + +#define S_PCI_MODE_64BIT 0 +#define V_PCI_MODE_64BIT(x) ((x) << S_PCI_MODE_64BIT) +#define F_PCI_MODE_64BIT V_PCI_MODE_64BIT(1U) + +#define S_PCI_MODE_PCIX 5 +#define V_PCI_MODE_PCIX(x) ((x) << S_PCI_MODE_PCIX) +#define F_PCI_MODE_PCIX V_PCI_MODE_PCIX(1U) + +#define S_PCI_MODE_CLK 6 +#define M_PCI_MODE_CLK 0x3 +#define G_PCI_MODE_CLK(x) (((x) >> S_PCI_MODE_CLK) & M_PCI_MODE_CLK) + diff --git a/drivers/net/chelsio/sge.c b/drivers/net/chelsio/sge.c new file mode 100644 index 00000000000..bcf8b1e939b --- /dev/null +++ b/drivers/net/chelsio/sge.c @@ -0,0 +1,1451 @@ +/***************************************************************************** + * * + * File: sge.c * + * $Revision: 1.13 $ * + * $Date: 2005/03/23 07:41:27 $ * + * Description: * + * DMA engine. * + * part of the Chelsio 10Gb Ethernet Driver. * + * * + * This program is free software; you can redistribute it and/or modify * + * it under the terms of the GNU General Public License, version 2, as * + * published by the Free Software Foundation. * + * * + * You should have received a copy of the GNU General Public License along * + * with this program; if not, write to the Free Software Foundation, Inc., * + * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. * + * * + * THIS SOFTWARE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR IMPLIED * + * WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED WARRANTIES OF * + * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. * + * * + * http://www.chelsio.com * + * * + * Copyright (c) 2003 - 2005 Chelsio Communications, Inc. * + * All rights reserved. * + * * + * Maintainers: maintainers@chelsio.com * + * * + * Authors: Dimitrios Michailidis * + * Tina Yang * + * Felix Marti * + * Scott Bardone * + * Kurt Ottaway * + * Frank DiMambro * + * * + * History: * + * * + ****************************************************************************/ + +#include "common.h" + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include "cpl5_cmd.h" +#include "sge.h" +#include "regs.h" +#include "espi.h" + +#include + +#define SGE_CMDQ_N 2 +#define SGE_FREELQ_N 2 +#define SGE_CMDQ0_E_N 512 +#define SGE_CMDQ1_E_N 128 +#define SGE_FREEL_SIZE 4096 +#define SGE_JUMBO_FREEL_SIZE 512 +#define SGE_FREEL_REFILL_THRESH 16 +#define SGE_RESPQ_E_N 1024 +#define SGE_INTR_BUCKETSIZE 100 +#define SGE_INTR_LATBUCKETS 5 +#define SGE_INTR_MAXBUCKETS 11 +#define SGE_INTRTIMER0 1 +#define SGE_INTRTIMER1 50 +#define SGE_INTRTIMER_NRES 10000 +#define SGE_RX_COPY_THRESHOLD 256 +#define SGE_RX_SM_BUF_SIZE 1536 + +#define SGE_RESPQ_REPLENISH_THRES ((3 * SGE_RESPQ_E_N) / 4) + +#define SGE_RX_OFFSET 2 +#ifndef NET_IP_ALIGN +# define NET_IP_ALIGN SGE_RX_OFFSET +#endif + +/* + * Memory Mapped HW Command, Freelist and Response Queue Descriptors + */ +#if defined(__BIG_ENDIAN_BITFIELD) +struct cmdQ_e { + u32 AddrLow; + u32 GenerationBit : 1; + u32 BufferLength : 31; + u32 RespQueueSelector : 4; + u32 ResponseTokens : 12; + u32 CmdId : 8; + u32 Reserved : 3; + u32 TokenValid : 1; + u32 Eop : 1; + u32 Sop : 1; + u32 DataValid : 1; + u32 GenerationBit2 : 1; + u32 AddrHigh; +}; + +struct freelQ_e { + u32 AddrLow; + u32 GenerationBit : 1; + u32 BufferLength : 31; + u32 Reserved : 31; + u32 GenerationBit2 : 1; + u32 AddrHigh; +}; + +struct respQ_e { + u32 Qsleeping : 4; + u32 Cmdq1CreditReturn : 5; + u32 Cmdq1DmaComplete : 5; + u32 Cmdq0CreditReturn : 5; + u32 Cmdq0DmaComplete : 5; + u32 FreelistQid : 2; + u32 CreditValid : 1; + u32 DataValid : 1; + u32 Offload : 1; + u32 Eop : 1; + u32 Sop : 1; + u32 GenerationBit : 1; + u32 BufferLength; +}; + +#elif defined(__LITTLE_ENDIAN_BITFIELD) +struct cmdQ_e { + u32 BufferLength : 31; + u32 GenerationBit : 1; + u32 AddrLow; + u32 AddrHigh; + u32 GenerationBit2 : 1; + u32 DataValid : 1; + u32 Sop : 1; + u32 Eop : 1; + u32 TokenValid : 1; + u32 Reserved : 3; + u32 CmdId : 8; + u32 ResponseTokens : 12; + u32 RespQueueSelector : 4; +}; + +struct freelQ_e { + u32 BufferLength : 31; + u32 GenerationBit : 1; + u32 AddrLow; + u32 AddrHigh; + u32 GenerationBit2 : 1; + u32 Reserved : 31; +}; + +struct respQ_e { + u32 BufferLength; + u32 GenerationBit : 1; + u32 Sop : 1; + u32 Eop : 1; + u32 Offload : 1; + u32 DataValid : 1; + u32 CreditValid : 1; + u32 FreelistQid : 2; + u32 Cmdq0DmaComplete : 5; + u32 Cmdq0CreditReturn : 5; + u32 Cmdq1DmaComplete : 5; + u32 Cmdq1CreditReturn : 5; + u32 Qsleeping : 4; +} ; +#endif + +/* + * SW Context Command and Freelist Queue Descriptors + */ +struct cmdQ_ce { + struct sk_buff *skb; + DECLARE_PCI_UNMAP_ADDR(dma_addr); + DECLARE_PCI_UNMAP_LEN(dma_len); + unsigned int single; +}; + +struct freelQ_ce { + struct sk_buff *skb; + DECLARE_PCI_UNMAP_ADDR(dma_addr); + DECLARE_PCI_UNMAP_LEN(dma_len); +}; + +/* + * SW Command, Freelist and Response Queue + */ +struct cmdQ { + atomic_t asleep; /* HW DMA Fetch status */ + atomic_t credits; /* # available descriptors for TX */ + atomic_t pio_pidx; /* Variable updated on Doorbell */ + u16 entries_n; /* # descriptors for TX */ + u16 pidx; /* producer index (SW) */ + u16 cidx; /* consumer index (HW) */ + u8 genbit; /* current generation (=valid) bit */ + struct cmdQ_e *entries; /* HW command descriptor Q */ + struct cmdQ_ce *centries; /* SW command context descriptor Q */ + spinlock_t Qlock; /* Lock to protect cmdQ enqueuing */ + dma_addr_t dma_addr; /* DMA addr HW command descriptor Q */ +}; + +struct freelQ { + unsigned int credits; /* # of available RX buffers */ + unsigned int entries_n; /* free list capacity */ + u16 pidx; /* producer index (SW) */ + u16 cidx; /* consumer index (HW) */ + u16 rx_buffer_size; /* Buffer size on this free list */ + u16 dma_offset; /* DMA offset to align IP headers */ + u8 genbit; /* current generation (=valid) bit */ + struct freelQ_e *entries; /* HW freelist descriptor Q */ + struct freelQ_ce *centries; /* SW freelist conext descriptor Q */ + dma_addr_t dma_addr; /* DMA addr HW freelist descriptor Q */ +}; + +struct respQ { + u16 credits; /* # of available respQ descriptors */ + u16 credits_pend; /* # of not yet returned descriptors */ + u16 entries_n; /* # of response Q descriptors */ + u16 pidx; /* producer index (HW) */ + u16 cidx; /* consumer index (SW) */ + u8 genbit; /* current generation(=valid) bit */ + struct respQ_e *entries; /* HW response descriptor Q */ + dma_addr_t dma_addr; /* DMA addr HW response descriptor Q */ +}; + +/* + * Main SGE data structure + * + * Interrupts are handled by a single CPU and it is likely that on a MP system + * the application is migrated to another CPU. In that scenario, we try to + * seperate the RX(in irq context) and TX state in order to decrease memory + * contention. + */ +struct sge { + struct adapter *adapter; /* adapter backpointer */ + struct freelQ freelQ[SGE_FREELQ_N]; /* freelist Q(s) */ + struct respQ respQ; /* response Q instatiation */ + unsigned int rx_pkt_pad; /* RX padding for L2 packets */ + unsigned int jumbo_fl; /* jumbo freelist Q index */ + u32 intrtimer[SGE_INTR_MAXBUCKETS]; /* ! */ + u32 currIndex; /* current index into intrtimer[] */ + u32 intrtimer_nres; /* no resource interrupt timer value */ + u32 sge_control; /* shadow content of sge control reg */ + struct sge_intr_counts intr_cnt; + struct timer_list ptimer; + struct sk_buff *pskb; + u32 ptimeout; + struct cmdQ cmdQ[SGE_CMDQ_N] ____cacheline_aligned; /* command Q(s)*/ +}; + +static unsigned int t1_sge_tx(struct sk_buff *skb, struct adapter *adapter, + unsigned int qid); + +/* + * PIO to indicate that memory mapped Q contains valid descriptor(s). + */ +static inline void doorbell_pio(struct sge *sge, u32 val) +{ + wmb(); + t1_write_reg_4(sge->adapter, A_SG_DOORBELL, val); +} + +/* + * Disables the DMA engine. + */ +void t1_sge_stop(struct sge *sge) +{ + t1_write_reg_4(sge->adapter, A_SG_CONTROL, 0); + t1_read_reg_4(sge->adapter, A_SG_CONTROL); /* flush write */ + if (is_T2(sge->adapter)) + del_timer_sync(&sge->ptimer); +} + +static u8 ch_mac_addr[ETH_ALEN] = {0x0, 0x7, 0x43, 0x0, 0x0, 0x0}; +static void t1_espi_workaround(void *data) +{ + struct adapter *adapter = (struct adapter *)data; + struct sge *sge = adapter->sge; + + if (netif_running(adapter->port[0].dev) && + atomic_read(&sge->cmdQ[0].asleep)) { + + u32 seop = t1_espi_get_mon(adapter, 0x930, 0); + + if ((seop & 0xfff0fff) == 0xfff && sge->pskb) { + struct sk_buff *skb = sge->pskb; + if (!skb->cb[0]) { + memcpy(skb->data+sizeof(struct cpl_tx_pkt), ch_mac_addr, ETH_ALEN); + memcpy(skb->data+skb->len-10, ch_mac_addr, ETH_ALEN); + + skb->cb[0] = 0xff; + } + t1_sge_tx(skb, adapter,0); + } + } + mod_timer(&adapter->sge->ptimer, jiffies + sge->ptimeout); +} + +/* + * Enables the DMA engine. + */ +void t1_sge_start(struct sge *sge) +{ + t1_write_reg_4(sge->adapter, A_SG_CONTROL, sge->sge_control); + t1_read_reg_4(sge->adapter, A_SG_CONTROL); /* flush write */ + if (is_T2(sge->adapter)) { + init_timer(&sge->ptimer); + sge->ptimer.function = (void *)&t1_espi_workaround; + sge->ptimer.data = (unsigned long)sge->adapter; + sge->ptimer.expires = jiffies + sge->ptimeout; + add_timer(&sge->ptimer); + } +} + +/* + * Creates a t1_sge structure and returns suggested resource parameters. + */ +struct sge * __devinit t1_sge_create(struct adapter *adapter, + struct sge_params *p) +{ + struct sge *sge = kmalloc(sizeof(*sge), GFP_KERNEL); + + if (!sge) + return NULL; + memset(sge, 0, sizeof(*sge)); + + if (is_T2(adapter)) + sge->ptimeout = 1; /* finest allowed */ + + sge->adapter = adapter; + sge->rx_pkt_pad = t1_is_T1B(adapter) ? 0 : SGE_RX_OFFSET; + sge->jumbo_fl = t1_is_T1B(adapter) ? 1 : 0; + + p->cmdQ_size[0] = SGE_CMDQ0_E_N; + p->cmdQ_size[1] = SGE_CMDQ1_E_N; + p->freelQ_size[!sge->jumbo_fl] = SGE_FREEL_SIZE; + p->freelQ_size[sge->jumbo_fl] = SGE_JUMBO_FREEL_SIZE; + p->rx_coalesce_usecs = SGE_INTRTIMER1; + p->last_rx_coalesce_raw = SGE_INTRTIMER1 * + (board_info(sge->adapter)->clock_core / 1000000); + p->default_rx_coalesce_usecs = SGE_INTRTIMER1; + p->coalesce_enable = 0; /* Turn off adaptive algorithm by default */ + p->sample_interval_usecs = 0; + return sge; +} + +/* + * Frees all RX buffers on the freelist Q. The caller must make sure that + * the SGE is turned off before calling this function. + */ +static void free_freelQ_buffers(struct pci_dev *pdev, struct freelQ *Q) +{ + unsigned int cidx = Q->cidx, credits = Q->credits; + + while (credits--) { + struct freelQ_ce *ce = &Q->centries[cidx]; + + pci_unmap_single(pdev, pci_unmap_addr(ce, dma_addr), + pci_unmap_len(ce, dma_len), + PCI_DMA_FROMDEVICE); + dev_kfree_skb(ce->skb); + ce->skb = NULL; + if (++cidx == Q->entries_n) + cidx = 0; + } +} + +/* + * Free RX free list and response queue resources. + */ +static void free_rx_resources(struct sge *sge) +{ + struct pci_dev *pdev = sge->adapter->pdev; + unsigned int size, i; + + if (sge->respQ.entries) { + size = sizeof(struct respQ_e) * sge->respQ.entries_n; + pci_free_consistent(pdev, size, sge->respQ.entries, + sge->respQ.dma_addr); + } + + for (i = 0; i < SGE_FREELQ_N; i++) { + struct freelQ *Q = &sge->freelQ[i]; + + if (Q->centries) { + free_freelQ_buffers(pdev, Q); + kfree(Q->centries); + } + if (Q->entries) { + size = sizeof(struct freelQ_e) * Q->entries_n; + pci_free_consistent(pdev, size, Q->entries, + Q->dma_addr); + } + } +} + +/* + * Allocates basic RX resources, consisting of memory mapped freelist Qs and a + * response Q. + */ +static int alloc_rx_resources(struct sge *sge, struct sge_params *p) +{ + struct pci_dev *pdev = sge->adapter->pdev; + unsigned int size, i; + + for (i = 0; i < SGE_FREELQ_N; i++) { + struct freelQ *Q = &sge->freelQ[i]; + + Q->genbit = 1; + Q->entries_n = p->freelQ_size[i]; + Q->dma_offset = SGE_RX_OFFSET - sge->rx_pkt_pad; + size = sizeof(struct freelQ_e) * Q->entries_n; + Q->entries = (struct freelQ_e *) + pci_alloc_consistent(pdev, size, &Q->dma_addr); + if (!Q->entries) + goto err_no_mem; + memset(Q->entries, 0, size); + Q->centries = kcalloc(Q->entries_n, sizeof(struct freelQ_ce), + GFP_KERNEL); + if (!Q->centries) + goto err_no_mem; + } + + /* + * Calculate the buffer sizes for the two free lists. FL0 accommodates + * regular sized Ethernet frames, FL1 is sized not to exceed 16K, + * including all the sk_buff overhead. + * + * Note: For T2 FL0 and FL1 are reversed. + */ + sge->freelQ[!sge->jumbo_fl].rx_buffer_size = SGE_RX_SM_BUF_SIZE + + sizeof(struct cpl_rx_data) + + sge->freelQ[!sge->jumbo_fl].dma_offset; + sge->freelQ[sge->jumbo_fl].rx_buffer_size = (16 * 1024) - + SKB_DATA_ALIGN(sizeof(struct skb_shared_info)); + + sge->respQ.genbit = 1; + sge->respQ.entries_n = SGE_RESPQ_E_N; + sge->respQ.credits = SGE_RESPQ_E_N; + size = sizeof(struct respQ_e) * sge->respQ.entries_n; + sge->respQ.entries = (struct respQ_e *) + pci_alloc_consistent(pdev, size, &sge->respQ.dma_addr); + if (!sge->respQ.entries) + goto err_no_mem; + memset(sge->respQ.entries, 0, size); + return 0; + +err_no_mem: + free_rx_resources(sge); + return -ENOMEM; +} + +/* + * Frees 'credits_pend' TX buffers and returns the credits to Q->credits. + * + * The adaptive algorithm receives the total size of the buffers freed + * accumulated in @*totpayload. No initialization of this argument here. + * + */ +static void free_cmdQ_buffers(struct sge *sge, struct cmdQ *Q, + unsigned int credits_pend, unsigned int *totpayload) +{ + struct pci_dev *pdev = sge->adapter->pdev; + struct sk_buff *skb; + struct cmdQ_ce *ce, *cq = Q->centries; + unsigned int entries_n = Q->entries_n, cidx = Q->cidx, + i = credits_pend; + + + ce = &cq[cidx]; + while (i--) { + if (ce->single) + pci_unmap_single(pdev, pci_unmap_addr(ce, dma_addr), + pci_unmap_len(ce, dma_len), + PCI_DMA_TODEVICE); + else + pci_unmap_page(pdev, pci_unmap_addr(ce, dma_addr), + pci_unmap_len(ce, dma_len), + PCI_DMA_TODEVICE); + if (totpayload) + *totpayload += pci_unmap_len(ce, dma_len); + + skb = ce->skb; + if (skb) + dev_kfree_skb_irq(skb); + + ce++; + if (++cidx == entries_n) { + cidx = 0; + ce = cq; + } + } + + Q->cidx = cidx; + atomic_add(credits_pend, &Q->credits); +} + +/* + * Free TX resources. + * + * Assumes that SGE is stopped and all interrupts are disabled. + */ +static void free_tx_resources(struct sge *sge) +{ + struct pci_dev *pdev = sge->adapter->pdev; + unsigned int size, i; + + for (i = 0; i < SGE_CMDQ_N; i++) { + struct cmdQ *Q = &sge->cmdQ[i]; + + if (Q->centries) { + unsigned int pending = Q->entries_n - + atomic_read(&Q->credits); + + if (pending) + free_cmdQ_buffers(sge, Q, pending, NULL); + kfree(Q->centries); + } + if (Q->entries) { + size = sizeof(struct cmdQ_e) * Q->entries_n; + pci_free_consistent(pdev, size, Q->entries, + Q->dma_addr); + } + } +} + +/* + * Allocates basic TX resources, consisting of memory mapped command Qs. + */ +static int alloc_tx_resources(struct sge *sge, struct sge_params *p) +{ + struct pci_dev *pdev = sge->adapter->pdev; + unsigned int size, i; + + for (i = 0; i < SGE_CMDQ_N; i++) { + struct cmdQ *Q = &sge->cmdQ[i]; + + Q->genbit = 1; + Q->entries_n = p->cmdQ_size[i]; + atomic_set(&Q->credits, Q->entries_n); + atomic_set(&Q->asleep, 1); + spin_lock_init(&Q->Qlock); + size = sizeof(struct cmdQ_e) * Q->entries_n; + Q->entries = (struct cmdQ_e *) + pci_alloc_consistent(pdev, size, &Q->dma_addr); + if (!Q->entries) + goto err_no_mem; + memset(Q->entries, 0, size); + Q->centries = kcalloc(Q->entries_n, sizeof(struct cmdQ_ce), + GFP_KERNEL); + if (!Q->centries) + goto err_no_mem; + } + + return 0; + +err_no_mem: + free_tx_resources(sge); + return -ENOMEM; +} + +static inline void setup_ring_params(struct adapter *adapter, u64 addr, + u32 size, int base_reg_lo, + int base_reg_hi, int size_reg) +{ + t1_write_reg_4(adapter, base_reg_lo, (u32)addr); + t1_write_reg_4(adapter, base_reg_hi, addr >> 32); + t1_write_reg_4(adapter, size_reg, size); +} + +/* + * Enable/disable VLAN acceleration. + */ +void t1_set_vlan_accel(struct adapter *adapter, int on_off) +{ + struct sge *sge = adapter->sge; + + sge->sge_control &= ~F_VLAN_XTRACT; + if (on_off) + sge->sge_control |= F_VLAN_XTRACT; + if (adapter->open_device_map) { + t1_write_reg_4(adapter, A_SG_CONTROL, sge->sge_control); + t1_read_reg_4(adapter, A_SG_CONTROL); /* flush */ + } +} + +/* + * Sets the interrupt latency timer when the adaptive Rx coalescing + * is turned off. Do nothing when it is turned on again. + * + * This routine relies on the fact that the caller has already set + * the adaptive policy in adapter->sge_params before calling it. +*/ +int t1_sge_set_coalesce_params(struct sge *sge, struct sge_params *p) +{ + if (!p->coalesce_enable) { + u32 newTimer = p->rx_coalesce_usecs * + (board_info(sge->adapter)->clock_core / 1000000); + + t1_write_reg_4(sge->adapter, A_SG_INTRTIMER, newTimer); + } + return 0; +} + +/* + * Programs the various SGE registers. However, the engine is not yet enabled, + * but sge->sge_control is setup and ready to go. + */ +static void configure_sge(struct sge *sge, struct sge_params *p) +{ + struct adapter *ap = sge->adapter; + int i; + + t1_write_reg_4(ap, A_SG_CONTROL, 0); + setup_ring_params(ap, sge->cmdQ[0].dma_addr, sge->cmdQ[0].entries_n, + A_SG_CMD0BASELWR, A_SG_CMD0BASEUPR, A_SG_CMD0SIZE); + setup_ring_params(ap, sge->cmdQ[1].dma_addr, sge->cmdQ[1].entries_n, + A_SG_CMD1BASELWR, A_SG_CMD1BASEUPR, A_SG_CMD1SIZE); + setup_ring_params(ap, sge->freelQ[0].dma_addr, + sge->freelQ[0].entries_n, A_SG_FL0BASELWR, + A_SG_FL0BASEUPR, A_SG_FL0SIZE); + setup_ring_params(ap, sge->freelQ[1].dma_addr, + sge->freelQ[1].entries_n, A_SG_FL1BASELWR, + A_SG_FL1BASEUPR, A_SG_FL1SIZE); + + /* The threshold comparison uses <. */ + t1_write_reg_4(ap, A_SG_FLTHRESHOLD, SGE_RX_SM_BUF_SIZE + 1); + + setup_ring_params(ap, sge->respQ.dma_addr, sge->respQ.entries_n, + A_SG_RSPBASELWR, A_SG_RSPBASEUPR, A_SG_RSPSIZE); + t1_write_reg_4(ap, A_SG_RSPQUEUECREDIT, (u32)sge->respQ.entries_n); + + sge->sge_control = F_CMDQ0_ENABLE | F_CMDQ1_ENABLE | F_FL0_ENABLE | + F_FL1_ENABLE | F_CPL_ENABLE | F_RESPONSE_QUEUE_ENABLE | + V_CMDQ_PRIORITY(2) | F_DISABLE_CMDQ1_GTS | F_ISCSI_COALESCE | + V_RX_PKT_OFFSET(sge->rx_pkt_pad); + +#if defined(__BIG_ENDIAN_BITFIELD) + sge->sge_control |= F_ENABLE_BIG_ENDIAN; +#endif + + /* + * Initialize the SGE Interrupt Timer arrray: + * intrtimer[0] = (SGE_INTRTIMER0) usec + * intrtimer[0intrtimer[0] = board_info(sge->adapter)->clock_core / 1000000; + for (i = 1; i < SGE_INTR_LATBUCKETS; ++i) { + sge->intrtimer[i] = SGE_INTRTIMER0 + (2 * i); + sge->intrtimer[i] *= sge->intrtimer[0]; + } + for (i = SGE_INTR_LATBUCKETS; i < SGE_INTR_MAXBUCKETS - 1; ++i) { + sge->intrtimer[i] = (i - 3) * 6; + sge->intrtimer[i] *= sge->intrtimer[0]; + } + sge->intrtimer[SGE_INTR_MAXBUCKETS - 1] = + sge->intrtimer[0] * SGE_INTRTIMER1; + /* Initialize resource timer */ + sge->intrtimer_nres = sge->intrtimer[0] * SGE_INTRTIMER_NRES; + /* Finally finish initialization of intrtimer[0] */ + sge->intrtimer[0] *= SGE_INTRTIMER0; + /* Initialize for a throughput oriented workload */ + sge->currIndex = SGE_INTR_MAXBUCKETS - 1; + + if (p->coalesce_enable) + t1_write_reg_4(ap, A_SG_INTRTIMER, + sge->intrtimer[sge->currIndex]); + else + t1_sge_set_coalesce_params(sge, p); +} + +/* + * Return the payload capacity of the jumbo free-list buffers. + */ +static inline unsigned int jumbo_payload_capacity(const struct sge *sge) +{ + return sge->freelQ[sge->jumbo_fl].rx_buffer_size - + sizeof(struct cpl_rx_data) - SGE_RX_OFFSET + sge->rx_pkt_pad; +} + +/* + * Allocates both RX and TX resources and configures the SGE. However, + * the hardware is not enabled yet. + */ +int t1_sge_configure(struct sge *sge, struct sge_params *p) +{ + if (alloc_rx_resources(sge, p)) + return -ENOMEM; + if (alloc_tx_resources(sge, p)) { + free_rx_resources(sge); + return -ENOMEM; + } + configure_sge(sge, p); + + /* + * Now that we have sized the free lists calculate the payload + * capacity of the large buffers. Other parts of the driver use + * this to set the max offload coalescing size so that RX packets + * do not overflow our large buffers. + */ + p->large_buf_capacity = jumbo_payload_capacity(sge); + return 0; +} + +/* + * Frees all SGE related resources and the sge structure itself + */ +void t1_sge_destroy(struct sge *sge) +{ + if (sge->pskb) + dev_kfree_skb(sge->pskb); + free_tx_resources(sge); + free_rx_resources(sge); + kfree(sge); +} + +/* + * Allocates new RX buffers on the freelist Q (and tracks them on the freelist + * context Q) until the Q is full or alloc_skb fails. + * + * It is possible that the generation bits already match, indicating that the + * buffer is already valid and nothing needs to be done. This happens when we + * copied a received buffer into a new sk_buff during the interrupt processing. + * + * If the SGE doesn't automatically align packets properly (!sge->rx_pkt_pad), + * we specify a RX_OFFSET in order to make sure that the IP header is 4B + * aligned. + */ +static void refill_free_list(struct sge *sge, struct freelQ *Q) +{ + struct pci_dev *pdev = sge->adapter->pdev; + struct freelQ_ce *ce = &Q->centries[Q->pidx]; + struct freelQ_e *e = &Q->entries[Q->pidx]; + unsigned int dma_len = Q->rx_buffer_size - Q->dma_offset; + + + while (Q->credits < Q->entries_n) { + if (e->GenerationBit != Q->genbit) { + struct sk_buff *skb; + dma_addr_t mapping; + + skb = alloc_skb(Q->rx_buffer_size, GFP_ATOMIC); + if (!skb) + break; + if (Q->dma_offset) + skb_reserve(skb, Q->dma_offset); + mapping = pci_map_single(pdev, skb->data, dma_len, + PCI_DMA_FROMDEVICE); + ce->skb = skb; + pci_unmap_addr_set(ce, dma_addr, mapping); + pci_unmap_len_set(ce, dma_len, dma_len); + e->AddrLow = (u32)mapping; + e->AddrHigh = (u64)mapping >> 32; + e->BufferLength = dma_len; + e->GenerationBit = e->GenerationBit2 = Q->genbit; + } + + e++; + ce++; + if (++Q->pidx == Q->entries_n) { + Q->pidx = 0; + Q->genbit ^= 1; + ce = Q->centries; + e = Q->entries; + } + Q->credits++; + } + +} + +/* + * Calls refill_free_list for both freelist Qs. If we cannot + * fill at least 1/4 of both Qs, we go into 'few interrupt mode' in order + * to give the system time to free up resources. + */ +static void freelQs_empty(struct sge *sge) +{ + u32 irq_reg = t1_read_reg_4(sge->adapter, A_SG_INT_ENABLE); + u32 irqholdoff_reg; + + refill_free_list(sge, &sge->freelQ[0]); + refill_free_list(sge, &sge->freelQ[1]); + + if (sge->freelQ[0].credits > (sge->freelQ[0].entries_n >> 2) && + sge->freelQ[1].credits > (sge->freelQ[1].entries_n >> 2)) { + irq_reg |= F_FL_EXHAUSTED; + irqholdoff_reg = sge->intrtimer[sge->currIndex]; + } else { + /* Clear the F_FL_EXHAUSTED interrupts for now */ + irq_reg &= ~F_FL_EXHAUSTED; + irqholdoff_reg = sge->intrtimer_nres; + } + t1_write_reg_4(sge->adapter, A_SG_INTRTIMER, irqholdoff_reg); + t1_write_reg_4(sge->adapter, A_SG_INT_ENABLE, irq_reg); + + /* We reenable the Qs to force a freelist GTS interrupt later */ + doorbell_pio(sge, F_FL0_ENABLE | F_FL1_ENABLE); +} + +#define SGE_PL_INTR_MASK (F_PL_INTR_SGE_ERR | F_PL_INTR_SGE_DATA) +#define SGE_INT_FATAL (F_RESPQ_OVERFLOW | F_PACKET_TOO_BIG | F_PACKET_MISMATCH) +#define SGE_INT_ENABLE (F_RESPQ_EXHAUSTED | F_RESPQ_OVERFLOW | \ + F_FL_EXHAUSTED | F_PACKET_TOO_BIG | F_PACKET_MISMATCH) + +/* + * Disable SGE Interrupts + */ +void t1_sge_intr_disable(struct sge *sge) +{ + u32 val = t1_read_reg_4(sge->adapter, A_PL_ENABLE); + + t1_write_reg_4(sge->adapter, A_PL_ENABLE, val & ~SGE_PL_INTR_MASK); + t1_write_reg_4(sge->adapter, A_SG_INT_ENABLE, 0); +} + +/* + * Enable SGE interrupts. + */ +void t1_sge_intr_enable(struct sge *sge) +{ + u32 en = SGE_INT_ENABLE; + u32 val = t1_read_reg_4(sge->adapter, A_PL_ENABLE); + + if (sge->adapter->flags & TSO_CAPABLE) + en &= ~F_PACKET_TOO_BIG; + t1_write_reg_4(sge->adapter, A_SG_INT_ENABLE, en); + t1_write_reg_4(sge->adapter, A_PL_ENABLE, val | SGE_PL_INTR_MASK); +} + +/* + * Clear SGE interrupts. + */ +void t1_sge_intr_clear(struct sge *sge) +{ + t1_write_reg_4(sge->adapter, A_PL_CAUSE, SGE_PL_INTR_MASK); + t1_write_reg_4(sge->adapter, A_SG_INT_CAUSE, 0xffffffff); +} + +/* + * SGE 'Error' interrupt handler + */ +int t1_sge_intr_error_handler(struct sge *sge) +{ + struct adapter *adapter = sge->adapter; + u32 cause = t1_read_reg_4(adapter, A_SG_INT_CAUSE); + + if (adapter->flags & TSO_CAPABLE) + cause &= ~F_PACKET_TOO_BIG; + if (cause & F_RESPQ_EXHAUSTED) + sge->intr_cnt.respQ_empty++; + if (cause & F_RESPQ_OVERFLOW) { + sge->intr_cnt.respQ_overflow++; + CH_ALERT("%s: SGE response queue overflow\n", + adapter->name); + } + if (cause & F_FL_EXHAUSTED) { + sge->intr_cnt.freelistQ_empty++; + freelQs_empty(sge); + } + if (cause & F_PACKET_TOO_BIG) { + sge->intr_cnt.pkt_too_big++; + CH_ALERT("%s: SGE max packet size exceeded\n", + adapter->name); + } + if (cause & F_PACKET_MISMATCH) { + sge->intr_cnt.pkt_mismatch++; + CH_ALERT("%s: SGE packet mismatch\n", adapter->name); + } + if (cause & SGE_INT_FATAL) + t1_fatal_err(adapter); + + t1_write_reg_4(adapter, A_SG_INT_CAUSE, cause); + return 0; +} + +/* + * The following code is copied from 2.6, where the skb_pull is doing the + * right thing and only pulls ETH_HLEN. + * + * Determine the packet's protocol ID. The rule here is that we + * assume 802.3 if the type field is short enough to be a length. + * This is normal practice and works for any 'now in use' protocol. + */ +static unsigned short sge_eth_type_trans(struct sk_buff *skb, + struct net_device *dev) +{ + struct ethhdr *eth; + unsigned char *rawp; + + skb->mac.raw = skb->data; + skb_pull(skb, ETH_HLEN); + eth = (struct ethhdr *)skb->mac.raw; + + if (*eth->h_dest&1) { + if(memcmp(eth->h_dest, dev->broadcast, ETH_ALEN) == 0) + skb->pkt_type = PACKET_BROADCAST; + else + skb->pkt_type = PACKET_MULTICAST; + } + + /* + * This ALLMULTI check should be redundant by 1.4 + * so don't forget to remove it. + * + * Seems, you forgot to remove it. All silly devices + * seems to set IFF_PROMISC. + */ + + else if (1 /*dev->flags&IFF_PROMISC*/) + { + if(memcmp(eth->h_dest,dev->dev_addr, ETH_ALEN)) + skb->pkt_type=PACKET_OTHERHOST; + } + + if (ntohs(eth->h_proto) >= 1536) + return eth->h_proto; + + rawp = skb->data; + + /* + * This is a magic hack to spot IPX packets. Older Novell breaks + * the protocol design and runs IPX over 802.3 without an 802.2 LLC + * layer. We look for FFFF which isn't a used 802.2 SSAP/DSAP. This + * won't work for fault tolerant netware but does for the rest. + */ + if (*(unsigned short *)rawp == 0xFFFF) + return htons(ETH_P_802_3); + + /* + * Real 802.2 LLC + */ + return htons(ETH_P_802_2); +} + +/* + * Prepare the received buffer and pass it up the stack. If it is small enough + * and allocation doesn't fail, we use a new sk_buff and copy the content. + */ +static unsigned int t1_sge_rx(struct sge *sge, struct freelQ *Q, + unsigned int len, unsigned int offload) +{ + struct sk_buff *skb; + struct adapter *adapter = sge->adapter; + struct freelQ_ce *ce = &Q->centries[Q->cidx]; + + if (len <= SGE_RX_COPY_THRESHOLD && + (skb = alloc_skb(len + NET_IP_ALIGN, GFP_ATOMIC))) { + struct freelQ_e *e; + char *src = ce->skb->data; + + pci_dma_sync_single_for_cpu(adapter->pdev, + pci_unmap_addr(ce, dma_addr), + pci_unmap_len(ce, dma_len), + PCI_DMA_FROMDEVICE); + if (!offload) { + skb_reserve(skb, NET_IP_ALIGN); + src += sge->rx_pkt_pad; + } + memcpy(skb->data, src, len); + + /* Reuse the entry. */ + e = &Q->entries[Q->cidx]; + e->GenerationBit ^= 1; + e->GenerationBit2 ^= 1; + } else { + pci_unmap_single(adapter->pdev, pci_unmap_addr(ce, dma_addr), + pci_unmap_len(ce, dma_len), + PCI_DMA_FROMDEVICE); + skb = ce->skb; + if (!offload && sge->rx_pkt_pad) + __skb_pull(skb, sge->rx_pkt_pad); + } + + skb_put(skb, len); + + + if (unlikely(offload)) { + { + printk(KERN_ERR + "%s: unexpected offloaded packet, cmd %u\n", + adapter->name, *skb->data); + dev_kfree_skb_any(skb); + } + } else { + struct cpl_rx_pkt *p = (struct cpl_rx_pkt *)skb->data; + + skb_pull(skb, sizeof(*p)); + skb->dev = adapter->port[p->iff].dev; + skb->dev->last_rx = jiffies; + skb->protocol = sge_eth_type_trans(skb, skb->dev); + if ((adapter->flags & RX_CSUM_ENABLED) && p->csum == 0xffff && + skb->protocol == htons(ETH_P_IP) && + (skb->data[9] == IPPROTO_TCP || + skb->data[9] == IPPROTO_UDP)) + skb->ip_summed = CHECKSUM_UNNECESSARY; + else + skb->ip_summed = CHECKSUM_NONE; + if (adapter->vlan_grp && p->vlan_valid) + vlan_hwaccel_rx(skb, adapter->vlan_grp, + ntohs(p->vlan)); + else + netif_rx(skb); + } + + if (++Q->cidx == Q->entries_n) + Q->cidx = 0; + + if (unlikely(--Q->credits < Q->entries_n - SGE_FREEL_REFILL_THRESH)) + refill_free_list(sge, Q); + return 1; +} + + +/* + * Adaptive interrupt timer logic to keep the CPU utilization to + * manageable levels. Basically, as the Average Packet Size (APS) + * gets higher, the interrupt latency setting gets longer. Every + * SGE_INTR_BUCKETSIZE (of 100B) causes a bump of 2usec to the + * base value of SGE_INTRTIMER0. At large values of payload the + * latency hits the ceiling value of SGE_INTRTIMER1 stored at + * index SGE_INTR_MAXBUCKETS-1 in sge->intrtimer[]. + * + * sge->currIndex caches the last index to save unneeded PIOs. + */ +static inline void update_intr_timer(struct sge *sge, unsigned int avg_payload) +{ + unsigned int newIndex; + + newIndex = avg_payload / SGE_INTR_BUCKETSIZE; + if (newIndex > SGE_INTR_MAXBUCKETS - 1) { + newIndex = SGE_INTR_MAXBUCKETS - 1; + } + /* Save a PIO with this check....maybe */ + if (newIndex != sge->currIndex) { + t1_write_reg_4(sge->adapter, A_SG_INTRTIMER, + sge->intrtimer[newIndex]); + sge->currIndex = newIndex; + sge->adapter->params.sge.last_rx_coalesce_raw = + sge->intrtimer[newIndex]; + } +} + +/* + * Returns true if command queue q_num has enough available descriptors that + * we can resume Tx operation after temporarily disabling its packet queue. + */ +static inline int enough_free_Tx_descs(struct sge *sge, int q_num) +{ + return atomic_read(&sge->cmdQ[q_num].credits) > + (sge->cmdQ[q_num].entries_n >> 2); +} + +/* + * Main interrupt handler, optimized assuming that we took a 'DATA' + * interrupt. + * + * 1. Clear the interrupt + * 2. Loop while we find valid descriptors and process them; accumulate + * information that can be processed after the loop + * 3. Tell the SGE at which index we stopped processing descriptors + * 4. Bookkeeping; free TX buffers, ring doorbell if there are any + * outstanding TX buffers waiting, replenish RX buffers, potentially + * reenable upper layers if they were turned off due to lack of TX + * resources which are available again. + * 5. If we took an interrupt, but no valid respQ descriptors was found we + * let the slow_intr_handler run and do error handling. + */ +irqreturn_t t1_interrupt(int irq, void *cookie, struct pt_regs *regs) +{ + struct net_device *netdev; + struct adapter *adapter = cookie; + struct sge *sge = adapter->sge; + struct respQ *Q = &sge->respQ; + unsigned int credits = Q->credits, flags = 0, ret = 0; + unsigned int tot_rxpayload = 0, tot_txpayload = 0, n_rx = 0, n_tx = 0; + unsigned int credits_pend[SGE_CMDQ_N] = { 0, 0 }; + + struct respQ_e *e = &Q->entries[Q->cidx]; + prefetch(e); + + t1_write_reg_4(adapter, A_PL_CAUSE, F_PL_INTR_SGE_DATA); + + + while (e->GenerationBit == Q->genbit) { + if (--credits < SGE_RESPQ_REPLENISH_THRES) { + u32 n = Q->entries_n - credits - 1; + + t1_write_reg_4(adapter, A_SG_RSPQUEUECREDIT, n); + credits += n; + } + if (likely(e->DataValid)) { + if (!e->Sop || !e->Eop) + BUG(); + t1_sge_rx(sge, &sge->freelQ[e->FreelistQid], + e->BufferLength, e->Offload); + tot_rxpayload += e->BufferLength; + ++n_rx; + } + flags |= e->Qsleeping; + credits_pend[0] += e->Cmdq0CreditReturn; + credits_pend[1] += e->Cmdq1CreditReturn; + +#ifdef CONFIG_SMP + /* + * If enough cmdQ0 buffers have finished DMAing free them so + * anyone that may be waiting for their release can continue. + * We do this only on MP systems to allow other CPUs to proceed + * promptly. UP systems can wait for the free_cmdQ_buffers() + * calls after this loop as the sole CPU is currently busy in + * this loop. + */ + if (unlikely(credits_pend[0] > SGE_FREEL_REFILL_THRESH)) { + free_cmdQ_buffers(sge, &sge->cmdQ[0], credits_pend[0], + &tot_txpayload); + n_tx += credits_pend[0]; + credits_pend[0] = 0; + } +#endif + ret++; + e++; + if (unlikely(++Q->cidx == Q->entries_n)) { + Q->cidx = 0; + Q->genbit ^= 1; + e = Q->entries; + } + } + + Q->credits = credits; + t1_write_reg_4(adapter, A_SG_SLEEPING, Q->cidx); + + if (credits_pend[0]) + free_cmdQ_buffers(sge, &sge->cmdQ[0], credits_pend[0], &tot_txpayload); + if (credits_pend[1]) + free_cmdQ_buffers(sge, &sge->cmdQ[1], credits_pend[1], &tot_txpayload); + + /* Do any coalescing and interrupt latency timer adjustments */ + if (adapter->params.sge.coalesce_enable) { + unsigned int avg_txpayload = 0, avg_rxpayload = 0; + + n_tx += credits_pend[0] + credits_pend[1]; + + /* + * Choose larger avg. payload size to increase + * throughput and reduce [CPU util., intr/s.] + * + * Throughput behavior favored in mixed-mode. + */ + if (n_tx) + avg_txpayload = tot_txpayload/n_tx; + if (n_rx) + avg_rxpayload = tot_rxpayload/n_rx; + + if (n_tx && avg_txpayload > avg_rxpayload){ + update_intr_timer(sge, avg_txpayload); + } else if (n_rx) { + update_intr_timer(sge, avg_rxpayload); + } + } + + if (flags & F_CMDQ0_ENABLE) { + struct cmdQ *cmdQ = &sge->cmdQ[0]; + + atomic_set(&cmdQ->asleep, 1); + if (atomic_read(&cmdQ->pio_pidx) != cmdQ->pidx) { + doorbell_pio(sge, F_CMDQ0_ENABLE); + atomic_set(&cmdQ->pio_pidx, cmdQ->pidx); + } + } + if (unlikely(flags & (F_FL0_ENABLE | F_FL1_ENABLE))) + freelQs_empty(sge); + + netdev = adapter->port[0].dev; + if (unlikely(netif_queue_stopped(netdev) && netif_carrier_ok(netdev) && + enough_free_Tx_descs(sge, 0) && + enough_free_Tx_descs(sge, 1))) { + netif_wake_queue(netdev); + } + if (unlikely(!ret)) + ret = t1_slow_intr_handler(adapter); + + return IRQ_RETVAL(ret != 0); +} + +/* + * Enqueues the sk_buff onto the cmdQ[qid] and has hardware fetch it. + * + * The code figures out how many entries the sk_buff will require in the + * cmdQ and updates the cmdQ data structure with the state once the enqueue + * has complete. Then, it doesn't access the global structure anymore, but + * uses the corresponding fields on the stack. In conjuction with a spinlock + * around that code, we can make the function reentrant without holding the + * lock when we actually enqueue (which might be expensive, especially on + * architectures with IO MMUs). + */ +static unsigned int t1_sge_tx(struct sk_buff *skb, struct adapter *adapter, + unsigned int qid) +{ + struct sge *sge = adapter->sge; + struct cmdQ *Q = &sge->cmdQ[qid]; + struct cmdQ_e *e; + struct cmdQ_ce *ce; + dma_addr_t mapping; + unsigned int credits, pidx, genbit; + + unsigned int count = 1 + skb_shinfo(skb)->nr_frags; + + /* + * Coming from the timer + */ + if ((skb == sge->pskb)) { + /* + * Quit if any cmdQ activities + */ + if (!spin_trylock(&Q->Qlock)) + return 0; + if (atomic_read(&Q->credits) != Q->entries_n) { + spin_unlock(&Q->Qlock); + return 0; + } + } + else + spin_lock(&Q->Qlock); + + genbit = Q->genbit; + pidx = Q->pidx; + credits = atomic_read(&Q->credits); + + credits -= count; + atomic_sub(count, &Q->credits); + Q->pidx += count; + if (Q->pidx >= Q->entries_n) { + Q->pidx -= Q->entries_n; + Q->genbit ^= 1; + } + + if (unlikely(credits < (MAX_SKB_FRAGS + 1))) { + sge->intr_cnt.cmdQ_full[qid]++; + netif_stop_queue(adapter->port[0].dev); + } + spin_unlock(&Q->Qlock); + + mapping = pci_map_single(adapter->pdev, skb->data, + skb->len - skb->data_len, PCI_DMA_TODEVICE); + ce = &Q->centries[pidx]; + ce->skb = NULL; + pci_unmap_addr_set(ce, dma_addr, mapping); + pci_unmap_len_set(ce, dma_len, skb->len - skb->data_len); + ce->single = 1; + + e = &Q->entries[pidx]; + e->Sop = 1; + e->DataValid = 1; + e->BufferLength = skb->len - skb->data_len; + e->AddrHigh = (u64)mapping >> 32; + e->AddrLow = (u32)mapping; + + if (--count > 0) { + unsigned int i; + + e->Eop = 0; + wmb(); + e->GenerationBit = e->GenerationBit2 = genbit; + + for (i = 0; i < count; i++) { + skb_frag_t *frag = &skb_shinfo(skb)->frags[i]; + + ce++; e++; + if (++pidx == Q->entries_n) { + pidx = 0; + genbit ^= 1; + ce = Q->centries; + e = Q->entries; + } + + mapping = pci_map_page(adapter->pdev, frag->page, + frag->page_offset, + frag->size, + PCI_DMA_TODEVICE); + ce->skb = NULL; + pci_unmap_addr_set(ce, dma_addr, mapping); + pci_unmap_len_set(ce, dma_len, frag->size); + ce->single = 0; + + e->Sop = 0; + e->DataValid = 1; + e->BufferLength = frag->size; + e->AddrHigh = (u64)mapping >> 32; + e->AddrLow = (u32)mapping; + + if (i < count - 1) { + e->Eop = 0; + wmb(); + e->GenerationBit = e->GenerationBit2 = genbit; + } + } + } + + if (skb != sge->pskb) + ce->skb = skb; + e->Eop = 1; + wmb(); + e->GenerationBit = e->GenerationBit2 = genbit; + + /* + * We always ring the doorbell for cmdQ1. For cmdQ0, we only ring + * the doorbell if the Q is asleep. There is a natural race, where + * the hardware is going to sleep just after we checked, however, + * then the interrupt handler will detect the outstanding TX packet + * and ring the doorbell for us. + */ + if (qid) { + doorbell_pio(sge, F_CMDQ1_ENABLE); + } else if (atomic_read(&Q->asleep)) { + atomic_set(&Q->asleep, 0); + doorbell_pio(sge, F_CMDQ0_ENABLE); + atomic_set(&Q->pio_pidx, Q->pidx); + } + return 0; +} + +#define MK_ETH_TYPE_MSS(type, mss) (((mss) & 0x3FFF) | ((type) << 14)) + +/* + * Adds the CPL header to the sk_buff and passes it to t1_sge_tx. + */ +int t1_start_xmit(struct sk_buff *skb, struct net_device *dev) +{ + struct adapter *adapter = dev->priv; + struct cpl_tx_pkt *cpl; + struct ethhdr *eth; + size_t max_len; + + /* + * We are using a non-standard hard_header_len and some kernel + * components, such as pktgen, do not handle it right. Complain + * when this happens but try to fix things up. + */ + if (unlikely(skb_headroom(skb) < dev->hard_header_len - ETH_HLEN)) { + struct sk_buff *orig_skb = skb; + + if (net_ratelimit()) + printk(KERN_ERR + "%s: Tx packet has inadequate headroom\n", + dev->name); + skb = skb_realloc_headroom(skb, sizeof(struct cpl_tx_pkt_lso)); + dev_kfree_skb_any(orig_skb); + if (!skb) + return -ENOMEM; + } + + if (skb_shinfo(skb)->tso_size) { + int eth_type; + struct cpl_tx_pkt_lso *hdr; + + eth_type = skb->nh.raw - skb->data == ETH_HLEN ? + CPL_ETH_II : CPL_ETH_II_VLAN; + + hdr = (struct cpl_tx_pkt_lso *)skb_push(skb, sizeof(*hdr)); + hdr->opcode = CPL_TX_PKT_LSO; + hdr->ip_csum_dis = hdr->l4_csum_dis = 0; + hdr->ip_hdr_words = skb->nh.iph->ihl; + hdr->tcp_hdr_words = skb->h.th->doff; + hdr->eth_type_mss = htons(MK_ETH_TYPE_MSS(eth_type, + skb_shinfo(skb)->tso_size)); + hdr->len = htonl(skb->len - sizeof(*hdr)); + cpl = (struct cpl_tx_pkt *)hdr; + } else + { + /* + * An Ethernet packet must have at least space for + * the DIX Ethernet header and be no greater than + * the device set MTU. Otherwise trash the packet. + */ + if (skb->len < ETH_HLEN) + goto t1_start_xmit_fail2; + eth = (struct ethhdr *)skb->data; + if (eth->h_proto == htons(ETH_P_8021Q)) + max_len = dev->mtu + VLAN_ETH_HLEN; + else + max_len = dev->mtu + ETH_HLEN; + if (skb->len > max_len) + goto t1_start_xmit_fail2; + + if (!(adapter->flags & UDP_CSUM_CAPABLE) && + skb->ip_summed == CHECKSUM_HW && + skb->nh.iph->protocol == IPPROTO_UDP && + skb_checksum_help(skb, 0)) + goto t1_start_xmit_fail3; + + + if (!adapter->sge->pskb) { + if (skb->protocol == htons(ETH_P_ARP) && + skb->nh.arph->ar_op == htons(ARPOP_REQUEST)) + adapter->sge->pskb = skb; + } + cpl = (struct cpl_tx_pkt *)skb_push(skb, sizeof(*cpl)); + cpl->opcode = CPL_TX_PKT; + cpl->ip_csum_dis = 1; /* SW calculates IP csum */ + cpl->l4_csum_dis = skb->ip_summed == CHECKSUM_HW ? 0 : 1; + /* the length field isn't used so don't bother setting it */ + } + cpl->iff = dev->if_port; + +#if defined(CONFIG_VLAN_8021Q) || defined(CONFIG_VLAN_8021Q_MODULE) + if (adapter->vlan_grp && vlan_tx_tag_present(skb)) { + cpl->vlan_valid = 1; + cpl->vlan = htons(vlan_tx_tag_get(skb)); + } else +#endif + cpl->vlan_valid = 0; + + dev->trans_start = jiffies; + return t1_sge_tx(skb, adapter, 0); + +t1_start_xmit_fail3: + printk(KERN_INFO "%s: Unable to complete checksum\n", dev->name); + goto t1_start_xmit_fail1; + +t1_start_xmit_fail2: + printk(KERN_INFO "%s: Invalid packet length %d, dropping\n", + dev->name, skb->len); + +t1_start_xmit_fail1: + dev_kfree_skb_any(skb); + return 0; +} + +void t1_sge_set_ptimeout(adapter_t *adapter, u32 val) +{ + struct sge *sge = adapter->sge; + + if (is_T2(adapter)) + sge->ptimeout = max((u32)((HZ * val) / 1000), (u32)1); +} + +u32 t1_sge_get_ptimeout(adapter_t *adapter) +{ + struct sge *sge = adapter->sge; + + return (is_T2(adapter) ? ((sge->ptimeout * 1000) / HZ) : 0); +} + diff --git a/drivers/net/chelsio/sge.h b/drivers/net/chelsio/sge.h new file mode 100644 index 00000000000..140f896def6 --- /dev/null +++ b/drivers/net/chelsio/sge.h @@ -0,0 +1,79 @@ +/***************************************************************************** + * * + * File: sge.h * + * $Revision: 1.7 $ * + * $Date: 2005/03/23 07:15:59 $ * + * Description: * + * part of the Chelsio 10Gb Ethernet Driver. * + * * + * This program is free software; you can redistribute it and/or modify * + * it under the terms of the GNU General Public License, version 2, as * + * published by the Free Software Foundation. * + * * + * You should have received a copy of the GNU General Public License along * + * with this program; if not, write to the Free Software Foundation, Inc., * + * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. * + * * + * THIS SOFTWARE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR IMPLIED * + * WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED WARRANTIES OF * + * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. * + * * + * http://www.chelsio.com * + * * + * Copyright (c) 2003 - 2005 Chelsio Communications, Inc. * + * All rights reserved. * + * * + * Maintainers: maintainers@chelsio.com * + * * + * Authors: Dimitrios Michailidis * + * Tina Yang * + * Felix Marti * + * Scott Bardone * + * Kurt Ottaway * + * Frank DiMambro * + * * + * History: * + * * + ****************************************************************************/ + +#ifndef _CHELSIO_LINUX_SGE_H_ +#define _CHELSIO_LINUX_SGE_H_ + +#include +#include +#include + +struct sge_intr_counts { + unsigned int respQ_empty; /* # times respQ empty */ + unsigned int respQ_overflow; /* # respQ overflow (fatal) */ + unsigned int freelistQ_empty; /* # times freelist empty */ + unsigned int pkt_too_big; /* packet too large (fatal) */ + unsigned int pkt_mismatch; + unsigned int cmdQ_full[2]; /* not HW interrupt, host cmdQ[] full */ +}; + +struct sk_buff; +struct net_device; +struct cxgbdev; +struct adapter; +struct sge_params; +struct sge; + +struct sge *t1_sge_create(struct adapter *, struct sge_params *); +int t1_sge_configure(struct sge *, struct sge_params *); +int t1_sge_set_coalesce_params(struct sge *, struct sge_params *); +void t1_sge_destroy(struct sge *); +irqreturn_t t1_interrupt(int, void *, struct pt_regs *); +int t1_start_xmit(struct sk_buff *skb, struct net_device *dev); +void t1_set_vlan_accel(struct adapter *adapter, int on_off); +void t1_sge_start(struct sge *); +void t1_sge_stop(struct sge *); +int t1_sge_intr_error_handler(struct sge *); +void t1_sge_intr_enable(struct sge *); +void t1_sge_intr_disable(struct sge *); +void t1_sge_intr_clear(struct sge *); + +void t1_sge_set_ptimeout(adapter_t *adapter, u32 val); +u32 t1_sge_get_ptimeout(adapter_t *adapter); + +#endif /* _CHELSIO_LINUX_SGE_H_ */ diff --git a/drivers/net/chelsio/subr.c b/drivers/net/chelsio/subr.c new file mode 100644 index 00000000000..a90a3f95fca --- /dev/null +++ b/drivers/net/chelsio/subr.c @@ -0,0 +1,831 @@ +/***************************************************************************** + * * + * File: subr.c * + * $Revision: 1.12 $ * + * $Date: 2005/03/23 07:41:27 $ * + * Description: * + * Various subroutines (intr,pio,etc.) used by Chelsio 10G Ethernet driver. * + * part of the Chelsio 10Gb Ethernet Driver. * + * * + * This program is free software; you can redistribute it and/or modify * + * it under the terms of the GNU General Public License, version 2, as * + * published by the Free Software Foundation. * + * * + * You should have received a copy of the GNU General Public License along * + * with this program; if not, write to the Free Software Foundation, Inc., * + * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. * + * * + * THIS SOFTWARE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR IMPLIED * + * WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED WARRANTIES OF * + * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. * + * * + * http://www.chelsio.com * + * * + * Copyright (c) 2003 - 2005 Chelsio Communications, Inc. * + * All rights reserved. * + * * + * Maintainers: maintainers@chelsio.com * + * * + * Authors: Dimitrios Michailidis * + * Tina Yang * + * Felix Marti * + * Scott Bardone * + * Kurt Ottaway * + * Frank DiMambro * + * * + * History: * + * * + ****************************************************************************/ + +#include "common.h" +#include "elmer0.h" +#include "regs.h" + +#include "gmac.h" +#include "cphy.h" +#include "sge.h" +#include "tp.h" +#include "espi.h" + +/** + * t1_wait_op_done - wait until an operation is completed + * @adapter: the adapter performing the operation + * @reg: the register to check for completion + * @mask: a single-bit field within @reg that indicates completion + * @polarity: the value of the field when the operation is completed + * @attempts: number of check iterations + * @delay: delay in usecs between iterations + * + * Wait until an operation is completed by checking a bit in a register + * up to @attempts times. Returns %0 if the operation completes and %1 + * otherwise. + */ +static int t1_wait_op_done(adapter_t *adapter, int reg, u32 mask, int polarity, + int attempts, int delay) +{ + while (1) { + u32 val = t1_read_reg_4(adapter, reg) & mask; + + if (!!val == polarity) + return 0; + if (--attempts == 0) + return 1; + if (delay) + udelay(delay); + } +} + +#define TPI_ATTEMPTS 50 + +/* + * Write a register over the TPI interface (unlocked and locked versions). + */ +static int __t1_tpi_write(adapter_t *adapter, u32 addr, u32 value) +{ + int tpi_busy; + + t1_write_reg_4(adapter, A_TPI_ADDR, addr); + t1_write_reg_4(adapter, A_TPI_WR_DATA, value); + t1_write_reg_4(adapter, A_TPI_CSR, F_TPIWR); + + tpi_busy = t1_wait_op_done(adapter, A_TPI_CSR, F_TPIRDY, 1, + TPI_ATTEMPTS, 3); + if (tpi_busy) + CH_ALERT("%s: TPI write to 0x%x failed\n", + adapter->name, addr); + return tpi_busy; +} + +int t1_tpi_write(adapter_t *adapter, u32 addr, u32 value) +{ + int ret; + + TPI_LOCK(adapter); + ret = __t1_tpi_write(adapter, addr, value); + TPI_UNLOCK(adapter); + return ret; +} + +/* + * Read a register over the TPI interface (unlocked and locked versions). + */ +static int __t1_tpi_read(adapter_t *adapter, u32 addr, u32 *valp) +{ + int tpi_busy; + + t1_write_reg_4(adapter, A_TPI_ADDR, addr); + t1_write_reg_4(adapter, A_TPI_CSR, 0); + + tpi_busy = t1_wait_op_done(adapter, A_TPI_CSR, F_TPIRDY, 1, + TPI_ATTEMPTS, 3); + if (tpi_busy) + CH_ALERT("%s: TPI read from 0x%x failed\n", + adapter->name, addr); + else + *valp = t1_read_reg_4(adapter, A_TPI_RD_DATA); + return tpi_busy; +} + +int t1_tpi_read(adapter_t *adapter, u32 addr, u32 *valp) +{ + int ret; + + TPI_LOCK(adapter); + ret = __t1_tpi_read(adapter, addr, valp); + TPI_UNLOCK(adapter); + return ret; +} + +/* + * Set a TPI parameter. + */ +static void t1_tpi_par(adapter_t *adapter, u32 value) +{ + t1_write_reg_4(adapter, A_TPI_PAR, V_TPIPAR(value)); +} + +/* + * Called when a port's link settings change to propagate the new values to the + * associated PHY and MAC. After performing the common tasks it invokes an + * OS-specific handler. + */ +/* static */ void link_changed(adapter_t *adapter, int port_id) +{ + int link_ok, speed, duplex, fc; + struct cphy *phy = adapter->port[port_id].phy; + struct link_config *lc = &adapter->port[port_id].link_config; + + phy->ops->get_link_status(phy, &link_ok, &speed, &duplex, &fc); + + lc->speed = speed < 0 ? SPEED_INVALID : speed; + lc->duplex = duplex < 0 ? DUPLEX_INVALID : duplex; + if (!(lc->requested_fc & PAUSE_AUTONEG)) + fc = lc->requested_fc & (PAUSE_RX | PAUSE_TX); + + if (link_ok && speed >= 0 && lc->autoneg == AUTONEG_ENABLE) { + /* Set MAC speed, duplex, and flow control to match PHY. */ + struct cmac *mac = adapter->port[port_id].mac; + + mac->ops->set_speed_duplex_fc(mac, speed, duplex, fc); + lc->fc = (unsigned char)fc; + } + t1_link_changed(adapter, port_id, link_ok, speed, duplex, fc); +} + +static int t1_pci_intr_handler(adapter_t *adapter) +{ + u32 pcix_cause; + + pci_read_config_dword(adapter->pdev, A_PCICFG_INTR_CAUSE, &pcix_cause); + + if (pcix_cause) { + pci_write_config_dword(adapter->pdev, A_PCICFG_INTR_CAUSE, + pcix_cause); + t1_fatal_err(adapter); /* PCI errors are fatal */ + } + return 0; +} + + +/* + * Wait until Elmer's MI1 interface is ready for new operations. + */ +static int mi1_wait_until_ready(adapter_t *adapter, int mi1_reg) +{ + int attempts = 100, busy; + + do { + u32 val; + + __t1_tpi_read(adapter, mi1_reg, &val); + busy = val & F_MI1_OP_BUSY; + if (busy) + udelay(10); + } while (busy && --attempts); + if (busy) + CH_ALERT("%s: MDIO operation timed out\n", + adapter->name); + return busy; +} + +/* + * MI1 MDIO initialization. + */ +static void mi1_mdio_init(adapter_t *adapter, const struct board_info *bi) +{ + u32 clkdiv = bi->clock_elmer0 / (2 * bi->mdio_mdc) - 1; + u32 val = F_MI1_PREAMBLE_ENABLE | V_MI1_MDI_INVERT(bi->mdio_mdiinv) | + V_MI1_MDI_ENABLE(bi->mdio_mdien) | V_MI1_CLK_DIV(clkdiv); + + if (!(bi->caps & SUPPORTED_10000baseT_Full)) + val |= V_MI1_SOF(1); + t1_tpi_write(adapter, A_ELMER0_PORT0_MI1_CFG, val); +} + +static int mi1_mdio_ext_read(adapter_t *adapter, int phy_addr, int mmd_addr, + int reg_addr, unsigned int *valp) +{ + u32 addr = V_MI1_REG_ADDR(mmd_addr) | V_MI1_PHY_ADDR(phy_addr); + + TPI_LOCK(adapter); + + /* Write the address we want. */ + __t1_tpi_write(adapter, A_ELMER0_PORT0_MI1_ADDR, addr); + __t1_tpi_write(adapter, A_ELMER0_PORT0_MI1_DATA, reg_addr); + __t1_tpi_write(adapter, A_ELMER0_PORT0_MI1_OP, + MI1_OP_INDIRECT_ADDRESS); + mi1_wait_until_ready(adapter, A_ELMER0_PORT0_MI1_OP); + + /* Write the operation we want. */ + __t1_tpi_write(adapter, A_ELMER0_PORT0_MI1_OP, MI1_OP_INDIRECT_READ); + mi1_wait_until_ready(adapter, A_ELMER0_PORT0_MI1_OP); + + /* Read the data. */ + __t1_tpi_read(adapter, A_ELMER0_PORT0_MI1_DATA, valp); + TPI_UNLOCK(adapter); + return 0; +} + +static int mi1_mdio_ext_write(adapter_t *adapter, int phy_addr, int mmd_addr, + int reg_addr, unsigned int val) +{ + u32 addr = V_MI1_REG_ADDR(mmd_addr) | V_MI1_PHY_ADDR(phy_addr); + + TPI_LOCK(adapter); + + /* Write the address we want. */ + __t1_tpi_write(adapter, A_ELMER0_PORT0_MI1_ADDR, addr); + __t1_tpi_write(adapter, A_ELMER0_PORT0_MI1_DATA, reg_addr); + __t1_tpi_write(adapter, A_ELMER0_PORT0_MI1_OP, + MI1_OP_INDIRECT_ADDRESS); + mi1_wait_until_ready(adapter, A_ELMER0_PORT0_MI1_OP); + + /* Write the data. */ + __t1_tpi_write(adapter, A_ELMER0_PORT0_MI1_DATA, val); + __t1_tpi_write(adapter, A_ELMER0_PORT0_MI1_OP, MI1_OP_INDIRECT_WRITE); + mi1_wait_until_ready(adapter, A_ELMER0_PORT0_MI1_OP); + TPI_UNLOCK(adapter); + return 0; +} + +static struct mdio_ops mi1_mdio_ext_ops = { + mi1_mdio_init, + mi1_mdio_ext_read, + mi1_mdio_ext_write +}; + +enum { + CH_BRD_N110_1F, + CH_BRD_N210_1F, + CH_BRD_T210_1F, +}; + +static struct board_info t1_board[] = { + +{ CHBT_BOARD_N110, 1/*ports#*/, + SUPPORTED_10000baseT_Full | SUPPORTED_FIBRE /*caps*/, CHBT_TERM_T1, + CHBT_MAC_PM3393, CHBT_PHY_88X2010, + 125000000/*clk-core*/, 0/*clk-mc3*/, 0/*clk-mc4*/, + 1/*espi-ports*/, 0/*clk-cspi*/, 44/*clk-elmer0*/, 0/*mdien*/, + 0/*mdiinv*/, 1/*mdc*/, 0/*phybaseaddr*/, &t1_pm3393_ops, + &t1_mv88x201x_ops, &mi1_mdio_ext_ops, + "Chelsio N110 1x10GBaseX NIC" }, + +{ CHBT_BOARD_N210, 1/*ports#*/, + SUPPORTED_10000baseT_Full | SUPPORTED_FIBRE /*caps*/, CHBT_TERM_T2, + CHBT_MAC_PM3393, CHBT_PHY_88X2010, + 125000000/*clk-core*/, 0/*clk-mc3*/, 0/*clk-mc4*/, + 1/*espi-ports*/, 0/*clk-cspi*/, 44/*clk-elmer0*/, 0/*mdien*/, + 0/*mdiinv*/, 1/*mdc*/, 0/*phybaseaddr*/, &t1_pm3393_ops, + &t1_mv88x201x_ops, &mi1_mdio_ext_ops, + "Chelsio N210 1x10GBaseX NIC" }, + +}; + +struct pci_device_id t1_pci_tbl[] = { + CH_DEVICE(7, 0, CH_BRD_N110_1F), + CH_DEVICE(10, 1, CH_BRD_N210_1F), + { 0, } +}; + +/* + * Return the board_info structure with a given index. Out-of-range indices + * return NULL. + */ +const struct board_info *t1_get_board_info(unsigned int board_id) +{ + return board_id < DIMOF(t1_board) ? &t1_board[board_id] : NULL; +} + +struct chelsio_vpd_t { + u32 format_version; + u8 serial_number[16]; + u8 mac_base_address[6]; + u8 pad[2]; /* make multiple-of-4 size requirement explicit */ +}; + +#define EEPROMSIZE (8 * 1024) +#define EEPROM_MAX_POLL 4 + +/* + * Read SEEPROM. A zero is written to the flag register when the addres is + * written to the Control register. The hardware device will set the flag to a + * one when 4B have been transferred to the Data register. + */ +int t1_seeprom_read(adapter_t *adapter, u32 addr, u32 *data) +{ + int i = EEPROM_MAX_POLL; + u16 val; + + if (addr >= EEPROMSIZE || (addr & 3)) + return -EINVAL; + + pci_write_config_word(adapter->pdev, A_PCICFG_VPD_ADDR, (u16)addr); + do { + udelay(50); + pci_read_config_word(adapter->pdev, A_PCICFG_VPD_ADDR, &val); + } while (!(val & F_VPD_OP_FLAG) && --i); + + if (!(val & F_VPD_OP_FLAG)) { + CH_ERR("%s: reading EEPROM address 0x%x failed\n", + adapter->name, addr); + return -EIO; + } + pci_read_config_dword(adapter->pdev, A_PCICFG_VPD_DATA, data); + *data = le32_to_cpu(*data); + return 0; +} + +static int t1_eeprom_vpd_get(adapter_t *adapter, struct chelsio_vpd_t *vpd) +{ + int addr, ret = 0; + + for (addr = 0; !ret && addr < sizeof(*vpd); addr += sizeof(u32)) + ret = t1_seeprom_read(adapter, addr, + (u32 *)((u8 *)vpd + addr)); + + return ret; +} + +/* + * Read a port's MAC address from the VPD ROM. + */ +static int vpd_macaddress_get(adapter_t *adapter, int index, u8 mac_addr[]) +{ + struct chelsio_vpd_t vpd; + + if (t1_eeprom_vpd_get(adapter, &vpd)) + return 1; + memcpy(mac_addr, vpd.mac_base_address, 5); + mac_addr[5] = vpd.mac_base_address[5] + index; + return 0; +} + +/* + * Set up the MAC/PHY according to the requested link settings. + * + * If the PHY can auto-negotiate first decide what to advertise, then + * enable/disable auto-negotiation as desired and reset. + * + * If the PHY does not auto-negotiate we just reset it. + * + * If auto-negotiation is off set the MAC to the proper speed/duplex/FC, + * otherwise do it later based on the outcome of auto-negotiation. + */ +int t1_link_start(struct cphy *phy, struct cmac *mac, struct link_config *lc) +{ + unsigned int fc = lc->requested_fc & (PAUSE_RX | PAUSE_TX); + + if (lc->supported & SUPPORTED_Autoneg) { + lc->advertising &= ~(ADVERTISED_ASYM_PAUSE | ADVERTISED_PAUSE); + if (fc) { + lc->advertising |= ADVERTISED_ASYM_PAUSE; + if (fc == (PAUSE_RX | PAUSE_TX)) + lc->advertising |= ADVERTISED_PAUSE; + } + phy->ops->advertise(phy, lc->advertising); + + if (lc->autoneg == AUTONEG_DISABLE) { + lc->speed = lc->requested_speed; + lc->duplex = lc->requested_duplex; + lc->fc = (unsigned char)fc; + mac->ops->set_speed_duplex_fc(mac, lc->speed, + lc->duplex, fc); + /* Also disables autoneg */ + phy->ops->set_speed_duplex(phy, lc->speed, lc->duplex); + phy->ops->reset(phy, 0); + } else + phy->ops->autoneg_enable(phy); /* also resets PHY */ + } else { + mac->ops->set_speed_duplex_fc(mac, -1, -1, fc); + lc->fc = (unsigned char)fc; + phy->ops->reset(phy, 0); + } + return 0; +} + +/* + * External interrupt handler for boards using elmer0. + */ +int elmer0_ext_intr_handler(adapter_t *adapter) +{ + struct cphy *phy; + int phy_cause; + u32 cause; + + t1_tpi_read(adapter, A_ELMER0_INT_CAUSE, &cause); + + switch (board_info(adapter)->board) { + case CHBT_BOARD_CHT210: + case CHBT_BOARD_N210: + case CHBT_BOARD_N110: + if (cause & ELMER0_GP_BIT6) { /* Marvell 88x2010 interrupt */ + phy = adapter->port[0].phy; + phy_cause = phy->ops->interrupt_handler(phy); + if (phy_cause & cphy_cause_link_change) + link_changed(adapter, 0); + } + break; + case CHBT_BOARD_8000: + case CHBT_BOARD_CHT110: + CH_DBG(adapter, INTR, "External interrupt cause 0x%x\n", + cause); + if (cause & ELMER0_GP_BIT1) { /* PMC3393 INTB */ + struct cmac *mac = adapter->port[0].mac; + + mac->ops->interrupt_handler(mac); + } + if (cause & ELMER0_GP_BIT5) { /* XPAK MOD_DETECT */ + u32 mod_detect; + + t1_tpi_read(adapter, A_ELMER0_GPI_STAT, &mod_detect); + CH_MSG(adapter, INFO, LINK, "XPAK %s\n", + mod_detect ? "removed" : "inserted"); + } + break; + } + t1_tpi_write(adapter, A_ELMER0_INT_CAUSE, cause); + return 0; +} + +/* Enables all interrupts. */ +void t1_interrupts_enable(adapter_t *adapter) +{ + unsigned int i; + + adapter->slow_intr_mask = F_PL_INTR_SGE_ERR | F_PL_INTR_TP; + + t1_sge_intr_enable(adapter->sge); + t1_tp_intr_enable(adapter->tp); + if (adapter->espi) { + adapter->slow_intr_mask |= F_PL_INTR_ESPI; + t1_espi_intr_enable(adapter->espi); + } + + /* Enable MAC/PHY interrupts for each port. */ + for_each_port(adapter, i) { + adapter->port[i].mac->ops->interrupt_enable(adapter->port[i].mac); + adapter->port[i].phy->ops->interrupt_enable(adapter->port[i].phy); + } + + /* Enable PCIX & external chip interrupts on ASIC boards. */ + if (t1_is_asic(adapter)) { + u32 pl_intr = t1_read_reg_4(adapter, A_PL_ENABLE); + + /* PCI-X interrupts */ + pci_write_config_dword(adapter->pdev, A_PCICFG_INTR_ENABLE, + 0xffffffff); + + adapter->slow_intr_mask |= F_PL_INTR_EXT | F_PL_INTR_PCIX; + pl_intr |= F_PL_INTR_EXT | F_PL_INTR_PCIX; + t1_write_reg_4(adapter, A_PL_ENABLE, pl_intr); + } +} + +/* Disables all interrupts. */ +void t1_interrupts_disable(adapter_t* adapter) +{ + unsigned int i; + + t1_sge_intr_disable(adapter->sge); + t1_tp_intr_disable(adapter->tp); + if (adapter->espi) + t1_espi_intr_disable(adapter->espi); + + /* Disable MAC/PHY interrupts for each port. */ + for_each_port(adapter, i) { + adapter->port[i].mac->ops->interrupt_disable(adapter->port[i].mac); + adapter->port[i].phy->ops->interrupt_disable(adapter->port[i].phy); + } + + /* Disable PCIX & external chip interrupts. */ + if (t1_is_asic(adapter)) + t1_write_reg_4(adapter, A_PL_ENABLE, 0); + + /* PCI-X interrupts */ + pci_write_config_dword(adapter->pdev, A_PCICFG_INTR_ENABLE, 0); + + adapter->slow_intr_mask = 0; +} + +/* Clears all interrupts */ +void t1_interrupts_clear(adapter_t* adapter) +{ + unsigned int i; + + t1_sge_intr_clear(adapter->sge); + t1_tp_intr_clear(adapter->tp); + if (adapter->espi) + t1_espi_intr_clear(adapter->espi); + + /* Clear MAC/PHY interrupts for each port. */ + for_each_port(adapter, i) { + adapter->port[i].mac->ops->interrupt_clear(adapter->port[i].mac); + adapter->port[i].phy->ops->interrupt_clear(adapter->port[i].phy); + } + + /* Enable interrupts for external devices. */ + if (t1_is_asic(adapter)) { + u32 pl_intr = t1_read_reg_4(adapter, A_PL_CAUSE); + + t1_write_reg_4(adapter, A_PL_CAUSE, + pl_intr | F_PL_INTR_EXT | F_PL_INTR_PCIX); + } + + /* PCI-X interrupts */ + pci_write_config_dword(adapter->pdev, A_PCICFG_INTR_CAUSE, 0xffffffff); +} + +/* + * Slow path interrupt handler for ASICs. + */ +static int asic_slow_intr(adapter_t *adapter) +{ + u32 cause = t1_read_reg_4(adapter, A_PL_CAUSE); + + cause &= adapter->slow_intr_mask; + if (!cause) + return 0; + if (cause & F_PL_INTR_SGE_ERR) + t1_sge_intr_error_handler(adapter->sge); + if (cause & F_PL_INTR_TP) + t1_tp_intr_handler(adapter->tp); + if (cause & F_PL_INTR_ESPI) + t1_espi_intr_handler(adapter->espi); + if (cause & F_PL_INTR_PCIX) + t1_pci_intr_handler(adapter); + if (cause & F_PL_INTR_EXT) + t1_elmer0_ext_intr(adapter); + + /* Clear the interrupts just processed. */ + t1_write_reg_4(adapter, A_PL_CAUSE, cause); + (void)t1_read_reg_4(adapter, A_PL_CAUSE); /* flush writes */ + return 1; +} + +int t1_slow_intr_handler(adapter_t *adapter) +{ + return asic_slow_intr(adapter); +} + +/* Power sequencing is a work-around for Intel's XPAKs. */ +static void power_sequence_xpak(adapter_t* adapter) +{ + u32 mod_detect; + u32 gpo; + + /* Check for XPAK */ + t1_tpi_read(adapter, A_ELMER0_GPI_STAT, &mod_detect); + if (!(ELMER0_GP_BIT5 & mod_detect)) { + /* XPAK is present */ + t1_tpi_read(adapter, A_ELMER0_GPO, &gpo); + gpo |= ELMER0_GP_BIT18; + t1_tpi_write(adapter, A_ELMER0_GPO, gpo); + } +} + +int __devinit t1_get_board_rev(adapter_t *adapter, const struct board_info *bi, + struct adapter_params *p) +{ + p->chip_version = bi->chip_term; + p->is_asic = (p->chip_version != CHBT_TERM_FPGA); + if (p->chip_version == CHBT_TERM_T1 || + p->chip_version == CHBT_TERM_T2 || + p->chip_version == CHBT_TERM_FPGA) { + u32 val = t1_read_reg_4(adapter, A_TP_PC_CONFIG); + + val = G_TP_PC_REV(val); + if (val == 2) + p->chip_revision = TERM_T1B; + else if (val == 3) + p->chip_revision = TERM_T2; + else + return -1; + } else + return -1; + return 0; +} + +/* + * Enable board components other than the Chelsio chip, such as external MAC + * and PHY. + */ +static int board_init(adapter_t *adapter, const struct board_info *bi) +{ + switch (bi->board) { + case CHBT_BOARD_8000: + case CHBT_BOARD_N110: + case CHBT_BOARD_N210: + case CHBT_BOARD_CHT210: + case CHBT_BOARD_COUGAR: + t1_tpi_par(adapter, 0xf); + t1_tpi_write(adapter, A_ELMER0_GPO, 0x800); + break; + case CHBT_BOARD_CHT110: + t1_tpi_par(adapter, 0xf); + t1_tpi_write(adapter, A_ELMER0_GPO, 0x1800); + + /* TBD XXX Might not need. This fixes a problem + * described in the Intel SR XPAK errata. + */ + power_sequence_xpak(adapter); + break; + } + return 0; +} + +/* + * Initialize and configure the Terminator HW modules. Note that external + * MAC and PHYs are initialized separately. + */ +int t1_init_hw_modules(adapter_t *adapter) +{ + int err = -EIO; + const struct board_info *bi = board_info(adapter); + + if (!adapter->mc4) { + u32 val = t1_read_reg_4(adapter, A_MC4_CFG); + + t1_write_reg_4(adapter, A_MC4_CFG, val | F_READY | F_MC4_SLOW); + t1_write_reg_4(adapter, A_MC5_CONFIG, + F_M_BUS_ENABLE | F_TCAM_RESET); + } + + if (adapter->espi && t1_espi_init(adapter->espi, bi->chip_mac, + bi->espi_nports)) + goto out_err; + + if (t1_tp_reset(adapter->tp, &adapter->params.tp, bi->clock_core)) + goto out_err; + + err = t1_sge_configure(adapter->sge, &adapter->params.sge); + if (err) + goto out_err; + + err = 0; + out_err: + return err; +} + +/* + * Determine a card's PCI mode. + */ +static void __devinit get_pci_mode(adapter_t *adapter, struct pci_params *p) +{ + static unsigned short speed_map[] = { 33, 66, 100, 133 }; + u32 pci_mode; + + pci_read_config_dword(adapter->pdev, A_PCICFG_MODE, &pci_mode); + p->speed = speed_map[G_PCI_MODE_CLK(pci_mode)]; + p->width = (pci_mode & F_PCI_MODE_64BIT) ? 64 : 32; + p->is_pcix = (pci_mode & F_PCI_MODE_PCIX) != 0; +} + +/* + * Release the structures holding the SW per-Terminator-HW-module state. + */ +void t1_free_sw_modules(adapter_t *adapter) +{ + unsigned int i; + + for_each_port(adapter, i) { + struct cmac *mac = adapter->port[i].mac; + struct cphy *phy = adapter->port[i].phy; + + if (mac) + mac->ops->destroy(mac); + if (phy) + phy->ops->destroy(phy); + } + + if (adapter->sge) + t1_sge_destroy(adapter->sge); + if (adapter->tp) + t1_tp_destroy(adapter->tp); + if (adapter->espi) + t1_espi_destroy(adapter->espi); +} + +static void __devinit init_link_config(struct link_config *lc, + const struct board_info *bi) +{ + lc->supported = bi->caps; + lc->requested_speed = lc->speed = SPEED_INVALID; + lc->requested_duplex = lc->duplex = DUPLEX_INVALID; + lc->requested_fc = lc->fc = PAUSE_RX | PAUSE_TX; + if (lc->supported & SUPPORTED_Autoneg) { + lc->advertising = lc->supported; + lc->autoneg = AUTONEG_ENABLE; + lc->requested_fc |= PAUSE_AUTONEG; + } else { + lc->advertising = 0; + lc->autoneg = AUTONEG_DISABLE; + } +} + + +/* + * Allocate and initialize the data structures that hold the SW state of + * the Terminator HW modules. + */ +int __devinit t1_init_sw_modules(adapter_t *adapter, + const struct board_info *bi) +{ + unsigned int i; + + adapter->params.brd_info = bi; + adapter->params.nports = bi->port_number; + adapter->params.stats_update_period = bi->gmac->stats_update_period; + + adapter->sge = t1_sge_create(adapter, &adapter->params.sge); + if (!adapter->sge) { + CH_ERR("%s: SGE initialization failed\n", + adapter->name); + goto error; + } + + + + if (bi->espi_nports && !(adapter->espi = t1_espi_create(adapter))) { + CH_ERR("%s: ESPI initialization failed\n", + adapter->name); + goto error; + } + + adapter->tp = t1_tp_create(adapter, &adapter->params.tp); + if (!adapter->tp) { + CH_ERR("%s: TP initialization failed\n", + adapter->name); + goto error; + } + + board_init(adapter, bi); + bi->mdio_ops->init(adapter, bi); + if (bi->gphy->reset) + bi->gphy->reset(adapter); + if (bi->gmac->reset) + bi->gmac->reset(adapter); + + for_each_port(adapter, i) { + u8 hw_addr[6]; + struct cmac *mac; + int phy_addr = bi->mdio_phybaseaddr + i; + + adapter->port[i].phy = bi->gphy->create(adapter, phy_addr, + bi->mdio_ops); + if (!adapter->port[i].phy) { + CH_ERR("%s: PHY %d initialization failed\n", + adapter->name, i); + goto error; + } + + adapter->port[i].mac = mac = bi->gmac->create(adapter, i); + if (!mac) { + CH_ERR("%s: MAC %d initialization failed\n", + adapter->name, i); + goto error; + } + + /* + * Get the port's MAC addresses either from the EEPROM if one + * exists or the one hardcoded in the MAC. + */ + if (!t1_is_asic(adapter) || bi->chip_mac == CHBT_MAC_DUMMY) + mac->ops->macaddress_get(mac, hw_addr); + else if (vpd_macaddress_get(adapter, i, hw_addr)) { + CH_ERR("%s: could not read MAC address from VPD ROM\n", + port_name(adapter, i)); + goto error; + } + t1_set_hw_addr(adapter, i, hw_addr); + init_link_config(&adapter->port[i].link_config, bi); + } + + get_pci_mode(adapter, &adapter->params.pci); + t1_interrupts_clear(adapter); + return 0; + + error: + t1_free_sw_modules(adapter); + return -1; +} diff --git a/drivers/net/chelsio/suni1x10gexp_regs.h b/drivers/net/chelsio/suni1x10gexp_regs.h new file mode 100644 index 00000000000..98352bdda89 --- /dev/null +++ b/drivers/net/chelsio/suni1x10gexp_regs.h @@ -0,0 +1,221 @@ +/***************************************************************************** + * * + * File: suni1x10gexp_regs.h * + * $Revision: 1.4 $ * + * $Date: 2005/03/23 07:15:59 $ * + * Description: * + * PMC/SIERRA (pm3393) MAC-PHY functionality. * + * part of the Chelsio 10Gb Ethernet Driver. * + * * + * This program is free software; you can redistribute it and/or modify * + * it under the terms of the GNU General Public License, version 2, as * + * published by the Free Software Foundation. * + * * + * You should have received a copy of the GNU General Public License along * + * with this program; if not, write to the Free Software Foundation, Inc., * + * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. * + * * + * THIS SOFTWARE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR IMPLIED * + * WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED WARRANTIES OF * + * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. * + * * + * http://www.chelsio.com * + * * + * Copyright (c) 2003 - 2005 Chelsio Communications, Inc. * + * All rights reserved. * + * * + * Maintainers: maintainers@chelsio.com * + * * + * Authors: Dimitrios Michailidis * + * Tina Yang * + * Felix Marti * + * Scott Bardone * + * Kurt Ottaway * + * Frank DiMambro * + * * + * History: * + * * + ****************************************************************************/ + +#ifndef _SUNI1x10GEXP_REGS_H +#define _SUNI1x10GEXP_REGS_H + +/******************************************************************************/ +/** S/UNI-1x10GE-XP REGISTER ADDRESS MAP **/ +/******************************************************************************/ +/* Refer to the Register Bit Masks bellow for the naming of each register and */ +/* to the S/UNI-1x10GE-XP Data Sheet for the signification of each bit */ +/******************************************************************************/ + +#define SUNI1x10GEXP_REG_DEVICE_STATUS 0x0004 +#define SUNI1x10GEXP_REG_MASTER_INTERRUPT_STATUS 0x000D +#define SUNI1x10GEXP_REG_GLOBAL_INTERRUPT_ENABLE 0x000E +#define SUNI1x10GEXP_REG_SERDES_3125_INTERRUPT_ENABLE 0x0102 +#define SUNI1x10GEXP_REG_SERDES_3125_INTERRUPT_STATUS 0x0104 +#define SUNI1x10GEXP_REG_RXXG_CONFIG_1 0x2040 +#define SUNI1x10GEXP_REG_RXXG_CONFIG_3 0x2042 +#define SUNI1x10GEXP_REG_RXXG_INTERRUPT 0x2043 +#define SUNI1x10GEXP_REG_RXXG_MAX_FRAME_LENGTH 0x2045 +#define SUNI1x10GEXP_REG_RXXG_SA_15_0 0x2046 +#define SUNI1x10GEXP_REG_RXXG_SA_31_16 0x2047 +#define SUNI1x10GEXP_REG_RXXG_SA_47_32 0x2048 +#define SUNI1x10GEXP_REG_RXXG_EXACT_MATCH_ADDR_1_LOW 0x204D +#define SUNI1x10GEXP_REG_RXXG_EXACT_MATCH_ADDR_1_MID 0x204E +#define SUNI1x10GEXP_REG_RXXG_EXACT_MATCH_ADDR_1_HIGH 0x204F +#define SUNI1x10GEXP_REG_RXXG_MULTICAST_HASH_LOW 0x206A +#define SUNI1x10GEXP_REG_RXXG_MULTICAST_HASH_MIDLOW 0x206B +#define SUNI1x10GEXP_REG_RXXG_MULTICAST_HASH_MIDHIGH 0x206C +#define SUNI1x10GEXP_REG_RXXG_MULTICAST_HASH_HIGH 0x206D +#define SUNI1x10GEXP_REG_RXXG_ADDRESS_FILTER_CONTROL_0 0x206E +#define SUNI1x10GEXP_REG_RXXG_ADDRESS_FILTER_CONTROL_2 0x2070 +#define SUNI1x10GEXP_REG_XRF_INTERRUPT_ENABLE 0x2088 +#define SUNI1x10GEXP_REG_XRF_INTERRUPT_STATUS 0x2089 +#define SUNI1x10GEXP_REG_XRF_DIAG_INTERRUPT_ENABLE 0x208B +#define SUNI1x10GEXP_REG_XRF_DIAG_INTERRUPT_STATUS 0x208C +#define SUNI1x10GEXP_REG_RXOAM_INTERRUPT_ENABLE 0x20C7 +#define SUNI1x10GEXP_REG_RXOAM_INTERRUPT_STATUS 0x20C8 +#define SUNI1x10GEXP_REG_MSTAT_CONTROL 0x2100 +#define SUNI1x10GEXP_REG_MSTAT_COUNTER_ROLLOVER_0 0x2101 +#define SUNI1x10GEXP_REG_MSTAT_COUNTER_ROLLOVER_1 0x2102 +#define SUNI1x10GEXP_REG_MSTAT_COUNTER_ROLLOVER_2 0x2103 +#define SUNI1x10GEXP_REG_MSTAT_COUNTER_ROLLOVER_3 0x2104 +#define SUNI1x10GEXP_REG_MSTAT_INTERRUPT_MASK_0 0x2105 +#define SUNI1x10GEXP_REG_MSTAT_INTERRUPT_MASK_1 0x2106 +#define SUNI1x10GEXP_REG_MSTAT_INTERRUPT_MASK_2 0x2107 +#define SUNI1x10GEXP_REG_MSTAT_INTERRUPT_MASK_3 0x2108 +#define SUNI1x10GEXP_REG_MSTAT_COUNTER_0_LOW 0x2110 +#define SUNI1x10GEXP_REG_MSTAT_COUNTER_1_LOW 0x2114 +#define SUNI1x10GEXP_REG_MSTAT_COUNTER_4_LOW 0x2120 +#define SUNI1x10GEXP_REG_MSTAT_COUNTER_5_LOW 0x2124 +#define SUNI1x10GEXP_REG_MSTAT_COUNTER_6_LOW 0x2128 +#define SUNI1x10GEXP_REG_MSTAT_COUNTER_8_LOW 0x2130 +#define SUNI1x10GEXP_REG_MSTAT_COUNTER_10_LOW 0x2138 +#define SUNI1x10GEXP_REG_MSTAT_COUNTER_11_LOW 0x213C +#define SUNI1x10GEXP_REG_MSTAT_COUNTER_12_LOW 0x2140 +#define SUNI1x10GEXP_REG_MSTAT_COUNTER_13_LOW 0x2144 +#define SUNI1x10GEXP_REG_MSTAT_COUNTER_15_LOW 0x214C +#define SUNI1x10GEXP_REG_MSTAT_COUNTER_16_LOW 0x2150 +#define SUNI1x10GEXP_REG_MSTAT_COUNTER_17_LOW 0x2154 +#define SUNI1x10GEXP_REG_MSTAT_COUNTER_18_LOW 0x2158 +#define SUNI1x10GEXP_REG_MSTAT_COUNTER_33_LOW 0x2194 +#define SUNI1x10GEXP_REG_MSTAT_COUNTER_35_LOW 0x219C +#define SUNI1x10GEXP_REG_MSTAT_COUNTER_36_LOW 0x21A0 +#define SUNI1x10GEXP_REG_MSTAT_COUNTER_38_LOW 0x21A8 +#define SUNI1x10GEXP_REG_MSTAT_COUNTER_40_LOW 0x21B0 +#define SUNI1x10GEXP_REG_MSTAT_COUNTER_42_LOW 0x21B8 +#define SUNI1x10GEXP_REG_MSTAT_COUNTER_43_LOW 0x21BC +#define SUNI1x10GEXP_REG_IFLX_FIFO_OVERFLOW_ENABLE 0x2209 +#define SUNI1x10GEXP_REG_IFLX_FIFO_OVERFLOW_INTERRUPT 0x220A +#define SUNI1x10GEXP_REG_PL4ODP_INTERRUPT_MASK 0x2282 +#define SUNI1x10GEXP_REG_PL4ODP_INTERRUPT 0x2283 +#define SUNI1x10GEXP_REG_PL4IO_LOCK_DETECT_STATUS 0x2300 +#define SUNI1x10GEXP_REG_PL4IO_LOCK_DETECT_CHANGE 0x2301 +#define SUNI1x10GEXP_REG_PL4IO_LOCK_DETECT_MASK 0x2302 +#define SUNI1x10GEXP_REG_TXXG_CONFIG_1 0x3040 +#define SUNI1x10GEXP_REG_TXXG_CONFIG_3 0x3042 +#define SUNI1x10GEXP_REG_TXXG_INTERRUPT 0x3043 +#define SUNI1x10GEXP_REG_TXXG_MAX_FRAME_SIZE 0x3045 +#define SUNI1x10GEXP_REG_TXXG_SA_15_0 0x3047 +#define SUNI1x10GEXP_REG_TXXG_SA_31_16 0x3048 +#define SUNI1x10GEXP_REG_TXXG_SA_47_32 0x3049 +#define SUNI1x10GEXP_REG_XTEF_INTERRUPT_STATUS 0x3084 +#define SUNI1x10GEXP_REG_XTEF_INTERRUPT_ENABLE 0x3085 +#define SUNI1x10GEXP_REG_TXOAM_INTERRUPT_ENABLE 0x30C6 +#define SUNI1x10GEXP_REG_TXOAM_INTERRUPT_STATUS 0x30C7 +#define SUNI1x10GEXP_REG_EFLX_FIFO_OVERFLOW_ERROR_ENABLE 0x320C +#define SUNI1x10GEXP_REG_EFLX_FIFO_OVERFLOW_ERROR_INDICATION 0x320D +#define SUNI1x10GEXP_REG_PL4IDU_INTERRUPT_MASK 0x3282 +#define SUNI1x10GEXP_REG_PL4IDU_INTERRUPT 0x3283 + +/******************************************************************************/ +/* -- End register offset definitions -- */ +/******************************************************************************/ + +/******************************************************************************/ +/** SUNI-1x10GE-XP REGISTER BIT MASKS **/ +/******************************************************************************/ + +/*---------------------------------------------------------------------------- + * Register 0x0004: S/UNI-1x10GE-XP Device Status + * Bit 9 TOP_SXRA_EXPIRED + * Bit 8 TOP_MDIO_BUSY + * Bit 7 TOP_DTRB + * Bit 6 TOP_EXPIRED + * Bit 5 TOP_PAUSED + * Bit 4 TOP_PL4_ID_DOOL + * Bit 3 TOP_PL4_IS_DOOL + * Bit 2 TOP_PL4_ID_ROOL + * Bit 1 TOP_PL4_IS_ROOL + * Bit 0 TOP_PL4_OUT_ROOL + *----------------------------------------------------------------------------*/ +#define SUNI1x10GEXP_BITMSK_TOP_SXRA_EXPIRED 0x0200 +#define SUNI1x10GEXP_BITMSK_TOP_EXPIRED 0x0040 +#define SUNI1x10GEXP_BITMSK_TOP_PL4_ID_DOOL 0x0010 +#define SUNI1x10GEXP_BITMSK_TOP_PL4_IS_DOOL 0x0008 +#define SUNI1x10GEXP_BITMSK_TOP_PL4_ID_ROOL 0x0004 +#define SUNI1x10GEXP_BITMSK_TOP_PL4_IS_ROOL 0x0002 +#define SUNI1x10GEXP_BITMSK_TOP_PL4_OUT_ROOL 0x0001 + +/*---------------------------------------------------------------------------- + * Register 0x000E:PM3393 Global interrupt enable + * Bit 15 TOP_INTE + *----------------------------------------------------------------------------*/ +#define SUNI1x10GEXP_BITMSK_TOP_INTE 0x8000 + +/*---------------------------------------------------------------------------- + * Register 0x2040: RXXG Configuration 1 + * Bit 15 RXXG_RXEN + * Bit 14 RXXG_ROCF + * Bit 13 RXXG_PAD_STRIP + * Bit 10 RXXG_PUREP + * Bit 9 RXXG_LONGP + * Bit 8 RXXG_PARF + * Bit 7 RXXG_FLCHK + * Bit 5 RXXG_PASS_CTRL + * Bit 3 RXXG_CRC_STRIP + * Bit 2-0 RXXG_MIFG + *----------------------------------------------------------------------------*/ +#define SUNI1x10GEXP_BITMSK_RXXG_RXEN 0x8000 +#define SUNI1x10GEXP_BITMSK_RXXG_PUREP 0x0400 +#define SUNI1x10GEXP_BITMSK_RXXG_FLCHK 0x0080 +#define SUNI1x10GEXP_BITMSK_RXXG_CRC_STRIP 0x0008 + +/*---------------------------------------------------------------------------- + * Register 0x2070: RXXG Address Filter Control 2 + * Bit 1 RXXG_PMODE + * Bit 0 RXXG_MHASH_EN + *----------------------------------------------------------------------------*/ +#define SUNI1x10GEXP_BITMSK_RXXG_PMODE 0x0002 +#define SUNI1x10GEXP_BITMSK_RXXG_MHASH_EN 0x0001 + +/*---------------------------------------------------------------------------- + * Register 0x2100: MSTAT Control + * Bit 2 MSTAT_WRITE + * Bit 1 MSTAT_CLEAR + * Bit 0 MSTAT_SNAP + *----------------------------------------------------------------------------*/ +#define SUNI1x10GEXP_BITMSK_MSTAT_CLEAR 0x0002 +#define SUNI1x10GEXP_BITMSK_MSTAT_SNAP 0x0001 + +/*---------------------------------------------------------------------------- + * Register 0x3040: TXXG Configuration Register 1 + * Bit 15 TXXG_TXEN0 + * Bit 13 TXXG_HOSTPAUSE + * Bit 12-7 TXXG_IPGT + * Bit 5 TXXG_32BIT_ALIGN + * Bit 4 TXXG_CRCEN + * Bit 3 TXXG_FCTX + * Bit 2 TXXG_FCRX + * Bit 1 TXXG_PADEN + * Bit 0 TXXG_SPRE + *----------------------------------------------------------------------------*/ +#define SUNI1x10GEXP_BITMSK_TXXG_TXEN0 0x8000 +#define SUNI1x10GEXP_BITOFF_TXXG_IPGT 7 +#define SUNI1x10GEXP_BITMSK_TXXG_32BIT_ALIGN 0x0020 +#define SUNI1x10GEXP_BITMSK_TXXG_CRCEN 0x0010 +#define SUNI1x10GEXP_BITMSK_TXXG_FCTX 0x0008 +#define SUNI1x10GEXP_BITMSK_TXXG_FCRX 0x0004 +#define SUNI1x10GEXP_BITMSK_TXXG_PADEN 0x0002 + +#endif /* _SUNI1x10GEXP_REGS_H */ + diff --git a/drivers/net/chelsio/tp.c b/drivers/net/chelsio/tp.c new file mode 100644 index 00000000000..9ad5c539fd2 --- /dev/null +++ b/drivers/net/chelsio/tp.c @@ -0,0 +1,188 @@ +/***************************************************************************** + * * + * File: tp.c * + * $Revision: 1.6 $ * + * $Date: 2005/03/23 07:15:59 $ * + * Description: * + * Core ASIC Management. * + * part of the Chelsio 10Gb Ethernet Driver. * + * * + * This program is free software; you can redistribute it and/or modify * + * it under the terms of the GNU General Public License, version 2, as * + * published by the Free Software Foundation. * + * * + * You should have received a copy of the GNU General Public License along * + * with this program; if not, write to the Free Software Foundation, Inc., * + * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. * + * * + * THIS SOFTWARE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR IMPLIED * + * WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED WARRANTIES OF * + * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. * + * * + * http://www.chelsio.com * + * * + * Copyright (c) 2003 - 2005 Chelsio Communications, Inc. * + * All rights reserved. * + * * + * Maintainers: maintainers@chelsio.com * + * * + * Authors: Dimitrios Michailidis * + * Tina Yang * + * Felix Marti * + * Scott Bardone * + * Kurt Ottaway * + * Frank DiMambro * + * * + * History: * + * * + ****************************************************************************/ + +#include "common.h" +#include "regs.h" +#include "tp.h" + +struct petp { + adapter_t *adapter; +}; + +/* Pause deadlock avoidance parameters */ +#define DROP_MSEC 16 +#define DROP_PKTS_CNT 1 + + +static void tp_init(adapter_t *ap, const struct tp_params *p, + unsigned int tp_clk) +{ + if (t1_is_asic(ap)) { + u32 val; + + val = F_TP_IN_CSPI_CPL | F_TP_IN_CSPI_CHECK_IP_CSUM | + F_TP_IN_CSPI_CHECK_TCP_CSUM | F_TP_IN_ESPI_ETHERNET; + if (!p->pm_size) + val |= F_OFFLOAD_DISABLE; + else + val |= F_TP_IN_ESPI_CHECK_IP_CSUM | + F_TP_IN_ESPI_CHECK_TCP_CSUM; + t1_write_reg_4(ap, A_TP_IN_CONFIG, val); + t1_write_reg_4(ap, A_TP_OUT_CONFIG, F_TP_OUT_CSPI_CPL | + F_TP_OUT_ESPI_ETHERNET | + F_TP_OUT_ESPI_GENERATE_IP_CSUM | + F_TP_OUT_ESPI_GENERATE_TCP_CSUM); + t1_write_reg_4(ap, A_TP_GLOBAL_CONFIG, V_IP_TTL(64) | + F_PATH_MTU /* IP DF bit */ | + V_5TUPLE_LOOKUP(p->use_5tuple_mode) | + V_SYN_COOKIE_PARAMETER(29)); + + /* + * Enable pause frame deadlock prevention. + */ + if (is_T2(ap)) { + u32 drop_ticks = DROP_MSEC * (tp_clk / 1000); + + t1_write_reg_4(ap, A_TP_TX_DROP_CONFIG, + F_ENABLE_TX_DROP | F_ENABLE_TX_ERROR | + V_DROP_TICKS_CNT(drop_ticks) | + V_NUM_PKTS_DROPPED(DROP_PKTS_CNT)); + } + + } +} + +void t1_tp_destroy(struct petp *tp) +{ + kfree(tp); +} + +struct petp * __devinit t1_tp_create(adapter_t *adapter, struct tp_params *p) +{ + struct petp *tp = kmalloc(sizeof(*tp), GFP_KERNEL); + if (!tp) + return NULL; + memset(tp, 0, sizeof(*tp)); + tp->adapter = adapter; + + return tp; +} + +void t1_tp_intr_enable(struct petp *tp) +{ + u32 tp_intr = t1_read_reg_4(tp->adapter, A_PL_ENABLE); + + { + /* We don't use any TP interrupts */ + t1_write_reg_4(tp->adapter, A_TP_INT_ENABLE, 0); + t1_write_reg_4(tp->adapter, A_PL_ENABLE, + tp_intr | F_PL_INTR_TP); + } +} + +void t1_tp_intr_disable(struct petp *tp) +{ + u32 tp_intr = t1_read_reg_4(tp->adapter, A_PL_ENABLE); + + { + t1_write_reg_4(tp->adapter, A_TP_INT_ENABLE, 0); + t1_write_reg_4(tp->adapter, A_PL_ENABLE, + tp_intr & ~F_PL_INTR_TP); + } +} + +void t1_tp_intr_clear(struct petp *tp) +{ + t1_write_reg_4(tp->adapter, A_TP_INT_CAUSE, 0xffffffff); + t1_write_reg_4(tp->adapter, A_PL_CAUSE, F_PL_INTR_TP); +} + +int t1_tp_intr_handler(struct petp *tp) +{ + u32 cause; + + + cause = t1_read_reg_4(tp->adapter, A_TP_INT_CAUSE); + t1_write_reg_4(tp->adapter, A_TP_INT_CAUSE, cause); + return 0; +} + +static void set_csum_offload(struct petp *tp, u32 csum_bit, int enable) +{ + u32 val = t1_read_reg_4(tp->adapter, A_TP_GLOBAL_CONFIG); + + if (enable) + val |= csum_bit; + else + val &= ~csum_bit; + t1_write_reg_4(tp->adapter, A_TP_GLOBAL_CONFIG, val); +} + +void t1_tp_set_ip_checksum_offload(struct petp *tp, int enable) +{ + set_csum_offload(tp, F_IP_CSUM, enable); +} + +void t1_tp_set_udp_checksum_offload(struct petp *tp, int enable) +{ + set_csum_offload(tp, F_UDP_CSUM, enable); +} + +void t1_tp_set_tcp_checksum_offload(struct petp *tp, int enable) +{ + set_csum_offload(tp, F_TCP_CSUM, enable); +} + +/* + * Initialize TP state. tp_params contains initial settings for some TP + * parameters, particularly the one-time PM and CM settings. + */ +int t1_tp_reset(struct petp *tp, struct tp_params *p, unsigned int tp_clk) +{ + int busy = 0; + adapter_t *adapter = tp->adapter; + + tp_init(adapter, p, tp_clk); + if (!busy) + t1_write_reg_4(adapter, A_TP_RESET, F_TP_RESET); + else + CH_ERR("%s: TP initialization timed out\n", + adapter->name); + return busy; +} diff --git a/drivers/net/chelsio/tp.h b/drivers/net/chelsio/tp.h new file mode 100644 index 00000000000..2ebc5c0d62e --- /dev/null +++ b/drivers/net/chelsio/tp.h @@ -0,0 +1,110 @@ +/***************************************************************************** + * * + * File: tp.h * + * $Revision: 1.3 $ * + * $Date: 2005/03/23 07:15:59 $ * + * Description: * + * part of the Chelsio 10Gb Ethernet Driver. * + * * + * This program is free software; you can redistribute it and/or modify * + * it under the terms of the GNU General Public License, version 2, as * + * published by the Free Software Foundation. * + * * + * You should have received a copy of the GNU General Public License along * + * with this program; if not, write to the Free Software Foundation, Inc., * + * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. * + * * + * THIS SOFTWARE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR IMPLIED * + * WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED WARRANTIES OF * + * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. * + * * + * http://www.chelsio.com * + * * + * Copyright (c) 2003 - 2005 Chelsio Communications, Inc. * + * All rights reserved. * + * * + * Maintainers: maintainers@chelsio.com * + * * + * Authors: Dimitrios Michailidis * + * Tina Yang * + * Felix Marti * + * Scott Bardone * + * Kurt Ottaway * + * Frank DiMambro * + * * + * History: * + * * + ****************************************************************************/ + +#ifndef CHELSIO_TP_H +#define CHELSIO_TP_H + +#include "common.h" + +#define TP_MAX_RX_COALESCING_SIZE 16224U + +struct tp_mib_statistics { + + /* IP */ + u32 ipInReceive_hi; + u32 ipInReceive_lo; + u32 ipInHdrErrors_hi; + u32 ipInHdrErrors_lo; + u32 ipInAddrErrors_hi; + u32 ipInAddrErrors_lo; + u32 ipInUnknownProtos_hi; + u32 ipInUnknownProtos_lo; + u32 ipInDiscards_hi; + u32 ipInDiscards_lo; + u32 ipInDelivers_hi; + u32 ipInDelivers_lo; + u32 ipOutRequests_hi; + u32 ipOutRequests_lo; + u32 ipOutDiscards_hi; + u32 ipOutDiscards_lo; + u32 ipOutNoRoutes_hi; + u32 ipOutNoRoutes_lo; + u32 ipReasmTimeout; + u32 ipReasmReqds; + u32 ipReasmOKs; + u32 ipReasmFails; + + u32 reserved[8]; + + /* TCP */ + u32 tcpActiveOpens; + u32 tcpPassiveOpens; + u32 tcpAttemptFails; + u32 tcpEstabResets; + u32 tcpOutRsts; + u32 tcpCurrEstab; + u32 tcpInSegs_hi; + u32 tcpInSegs_lo; + u32 tcpOutSegs_hi; + u32 tcpOutSegs_lo; + u32 tcpRetransSeg_hi; + u32 tcpRetransSeg_lo; + u32 tcpInErrs_hi; + u32 tcpInErrs_lo; + u32 tcpRtoMin; + u32 tcpRtoMax; +}; + +struct petp; +struct tp_params; + +struct petp *t1_tp_create(adapter_t *adapter, struct tp_params *p); +void t1_tp_destroy(struct petp *tp); + +void t1_tp_intr_disable(struct petp *tp); +void t1_tp_intr_enable(struct petp *tp); +void t1_tp_intr_clear(struct petp *tp); +int t1_tp_intr_handler(struct petp *tp); + +void t1_tp_get_mib_statistics(adapter_t *adap, struct tp_mib_statistics *tps); +void t1_tp_set_udp_checksum_offload(struct petp *tp, int enable); +void t1_tp_set_tcp_checksum_offload(struct petp *tp, int enable); +void t1_tp_set_ip_checksum_offload(struct petp *tp, int enable); +int t1_tp_set_coalescing_size(struct petp *tp, unsigned int size); +int t1_tp_reset(struct petp *tp, struct tp_params *p, unsigned int tp_clk); +#endif -- cgit v1.2.3 From 559fb51ba7e66fe298b8355fabde1275b7def35f Mon Sep 17 00:00:00 2001 From: Scott Bardone Date: Thu, 23 Jun 2005 01:40:19 -0400 Subject: Update Chelsio gige net driver. - Use extern prefix for functions required. - Removed a lot of wrappers, including t1_read/write_reg_4. - Removed various macros, using native kernel calls now. - Enumerated various #defines. - Removed a lot of shared code which is not currently used in "NIC only" mode. - Removed dead code. Documentation/networking/cxgb.txt: - Updated release notes for version 2.1.1 drivers/net/chelsio/ch_ethtool.h - removed file, no longer using ETHTOOL namespace. drivers/net/chelsio/common.h - moved code from osdep.h to common.h - added comment to #endif indicating which symbol it closes. drivers/net/chelsio/cphy.h - removed dead code. - added comment to #endif indicating which symbol it closes. drivers/net/chelsio/cxgb2.c - use DMA_{32,64}BIT_MASK in include/linux/dma-mapping.h. - removed unused code. - use printk message for link info resembling drivers/net/mii.c. - no longer using the MODULE_xxx namespace. - no longer using "pci_" namespace. - no longer using ETHTOOL namespace. drivers/net/chelsio/cxgb2.h - removed file, merged into common.h drivers/net/chelsio/elmer0.h - removed dead code. - added various enums. - added comment to #endif indicating which symbol it closes. drivers/net/chelsio/espi.c - removed various macros, using native kernel calls now. - removed a lot of wrappers, including t1_read/write_reg_4. drivers/net/chelsio/espi.h - added comment to #endif indicating which symbol it closes. drivers/net/chelsio/gmac.h - added comment to #endif indicating which symbol it closes. drivers/net/chelsio/mv88x201x.c - changes to sync with Chelsio TOT. drivers/net/chelsio/osdep.h - removed file, consolidation. osdep was used to translate wrapper functions since our code supports multiple OSs. removed wrappers. drivers/net/chelsio/pm3393.c - removed various macros, using native kernel calls now. - removed a lot of wrappers, including t1_read/write_reg_4. - removed unused code. drivers/net/chelsio/regs.h - added a few register entries for future and current feature support. - added comment to #endif indicating which symbol it closes. drivers/net/chelsio/sge.c - rewrote large portion of scatter-gather engine to stabilize performance. - using u8/u16/u32 kernel types instead of __u8/__u16/__u32 compiler types. drivers/net/chelsio/sge.h - rewrote large portion of scatter-gather engine to stabilize performance. - added comment to #endif indicating which symbol it closes. drivers/net/chelsio/subr.c - merged tp.c into subr.c - removed various macros, using native kernel calls now. - removed a lot of wrappers, including t1_read/write_reg_4. - removed unused code. drivers/net/chelsio/suni1x10gexp_regs.h - modified copyright and authorship of file. - added comment to #endif indicating which symbol it closes. drivers/net/chelsio/tp.c - removed file, merged into subr.c. drivers/net/chelsio/tp.h - removed file. include/linux/pci_ids.h - patched to include PCI_VENDOR_ID_CHELSIO 0x1425, removed define from our code. --- Documentation/networking/cxgb.txt | 72 +- drivers/net/chelsio/Makefile | 3 +- drivers/net/chelsio/ch_ethtool.h | 102 -- drivers/net/chelsio/common.h | 259 +++-- drivers/net/chelsio/cphy.h | 14 +- drivers/net/chelsio/cpl5_cmd.h | 118 +- drivers/net/chelsio/cxgb2.c | 537 ++++----- drivers/net/chelsio/cxgb2.h | 122 -- drivers/net/chelsio/elmer0.h | 16 +- drivers/net/chelsio/espi.c | 168 ++- drivers/net/chelsio/espi.h | 11 +- drivers/net/chelsio/gmac.h | 11 +- drivers/net/chelsio/mv88x201x.c | 36 +- drivers/net/chelsio/osdep.h | 169 --- drivers/net/chelsio/pm3393.c | 45 +- drivers/net/chelsio/regs.h | 21 +- drivers/net/chelsio/sge.c | 1859 +++++++++++++++++-------------- drivers/net/chelsio/sge.h | 48 +- drivers/net/chelsio/subr.c | 235 ++-- drivers/net/chelsio/suni1x10gexp_regs.h | 20 +- drivers/net/chelsio/tp.c | 188 ---- drivers/net/chelsio/tp.h | 110 -- include/linux/pci_ids.h | 1 + 23 files changed, 1882 insertions(+), 2283 deletions(-) delete mode 100644 drivers/net/chelsio/ch_ethtool.h delete mode 100644 drivers/net/chelsio/cxgb2.h delete mode 100644 drivers/net/chelsio/osdep.h delete mode 100644 drivers/net/chelsio/tp.c delete mode 100644 drivers/net/chelsio/tp.h diff --git a/Documentation/networking/cxgb.txt b/Documentation/networking/cxgb.txt index 9f2eb646c6f..76324638626 100644 --- a/Documentation/networking/cxgb.txt +++ b/Documentation/networking/cxgb.txt @@ -2,9 +2,9 @@ Driver Release Notes for Linux - Version 2.1.0 + Version 2.1.1 - March 8, 2005 + June 20, 2005 CONTENTS ======== @@ -21,8 +21,7 @@ INTRODUCTION This document describes the Linux driver for Chelsio 10Gb Ethernet Network Controller. This driver supports the Chelsio N210 NIC and is backward - compatible with the Chelsio N110 model 10Gb NICs. This driver supports AMD64 - and EM64T, and x86 systems. + compatible with the Chelsio N110 model 10Gb NICs. FEATURES @@ -121,23 +120,17 @@ PERFORMANCE Disabling SACK: sysctl -w net.ipv4.tcp_sack=0 - Setting TCP read buffers (min/default/max): - sysctl -w net.ipv4.tcp_rmem="10000000 10000000 10000000" - - Setting TCP write buffers (min/pressure/max): - sysctl -w net.ipv4.tcp_wmem="10000000 10000000 10000000" - - Setting TCP buffer space (min/pressure/max): - sysctl -w net.ipv4.tcp_mem="10000000 10000000 10000000" - - Setting large number of incoming connection requests (2.6.x only): + Setting large number of incoming connection requests: sysctl -w net.ipv4.tcp_max_syn_backlog=3000 Setting maximum receive socket buffer size: - sysctl -w net.core.rmem_max=524287 + sysctl -w net.core.rmem_max=1024000 Setting maximum send socket buffer size: - sysctl -w net.core.wmem_max=524287 + sysctl -w net.core.wmem_max=1024000 + + Set smp_affinity (on a multiprocessor system) to a single CPU: + echo 1 > /proc/irq//smp_affinity Setting default receive socket buffer size: sysctl -w net.core.rmem_default=524287 @@ -151,8 +144,14 @@ PERFORMANCE Setting maximum backlog (# of unprocessed packets before kernel drops): sysctl -w net.core.netdev_max_backlog=300000 - Set smp_affinity (on a multiprocessor system) to a single CPU: - echo 00000001 > /proc/irq//smp_affinity + Setting TCP read buffers (min/default/max): + sysctl -w net.ipv4.tcp_rmem="10000000 10000000 10000000" + + Setting TCP write buffers (min/pressure/max): + sysctl -w net.ipv4.tcp_wmem="10000000 10000000 10000000" + + Setting TCP buffer space (min/pressure/max): + sysctl -w net.ipv4.tcp_mem="10000000 10000000 10000000" TCP window size for single connections: The receive buffer (RX_WINDOW) size must be at least as large as the @@ -186,7 +185,7 @@ DRIVER MESSAGES may be found in /var/log/messages. Driver up: - Chelsio Network Driver - version 2.1.0 + Chelsio Network Driver - version 2.1.1 NIC detected: eth#: Chelsio N210 1x10GBaseX NIC (rev #), PCIX 133MHz/64-bit @@ -282,13 +281,44 @@ KNOWN ISSUES the number of outstanding transactions, via BIOS configuration programming of the PCI-X card, to the following: - Data Length (bytes): 2k - Total allowed outstanding transactions: 1 + Data Length (bytes): 1k + Total allowed outstanding transactions: 2 Please refer to AMD 8131-HT/PCI-X Errata 26310 Rev 3.08 August 2004, section 56, "133-MHz Mode Split Completion Data Corruption" for more details with this bug and workarounds suggested by AMD. + It may be possible to work outside AMD's recommended PCI-X settings, try + increasing the Data Length to 2k bytes for increased performance. If you + have issues with these settings, please revert to the "safe" settings + and duplicate the problem before submitting a bug or asking for support. + + NOTE: The default setting on most systems is 8 outstanding transactions + and 2k bytes data length. + + 4. On multiprocessor systems, it has been noted that an application which + is handling 10Gb networking can switch between CPUs causing degraded + and/or unstable performance. + + If running on an SMP system and taking performance measurements, it + is suggested you either run the latest netperf-2.4.0+ or use a binding + tool such as Tim Hockin's procstate utilities (runon) + . + + Binding netserver and netperf (or other applications) to particular + CPUs will have a significant difference in performance measurements. + You may need to experiment which CPU to bind the application to in + order to achieve the best performance for your system. + + If you are developing an application designed for 10Gb networking, + please keep in mind you may want to look at kernel functions + sched_setaffinity & sched_getaffinity to bind your application. + + If you are just running user-space applications such as ftp, telnet, + etc., you may want to try the runon tool provided by Tim Hockin's + procstate utility. You could also try binding the interface to a + particular CPU: runon 0 ifup eth0 + SUPPORT ======= diff --git a/drivers/net/chelsio/Makefile b/drivers/net/chelsio/Makefile index ff8c11b3a4e..91e927827c4 100644 --- a/drivers/net/chelsio/Makefile +++ b/drivers/net/chelsio/Makefile @@ -7,6 +7,5 @@ obj-$(CONFIG_CHELSIO_T1) += cxgb.o EXTRA_CFLAGS += -I$(TOPDIR)/drivers/net/chelsio $(DEBUG_FLAGS) -cxgb-objs := cxgb2.o espi.o tp.o pm3393.o sge.o subr.o mv88x201x.o - +cxgb-objs := cxgb2.o espi.o pm3393.o sge.o subr.o mv88x201x.o diff --git a/drivers/net/chelsio/ch_ethtool.h b/drivers/net/chelsio/ch_ethtool.h deleted file mode 100644 index c523d24836b..00000000000 --- a/drivers/net/chelsio/ch_ethtool.h +++ /dev/null @@ -1,102 +0,0 @@ -/***************************************************************************** - * * - * File: ch_ethtool.h * - * $Revision: 1.5 $ * - * $Date: 2005/03/23 07:15:58 $ * - * Description: * - * part of the Chelsio 10Gb Ethernet Driver. * - * * - * This program is free software; you can redistribute it and/or modify * - * it under the terms of the GNU General Public License, version 2, as * - * published by the Free Software Foundation. * - * * - * You should have received a copy of the GNU General Public License along * - * with this program; if not, write to the Free Software Foundation, Inc., * - * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. * - * * - * THIS SOFTWARE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR IMPLIED * - * WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED WARRANTIES OF * - * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. * - * * - * http://www.chelsio.com * - * * - * Copyright (c) 2003 - 2005 Chelsio Communications, Inc. * - * All rights reserved. * - * * - * Maintainers: maintainers@chelsio.com * - * * - * Authors: Dimitrios Michailidis * - * Tina Yang * - * Felix Marti * - * Scott Bardone * - * Kurt Ottaway * - * Frank DiMambro * - * * - * History: * - * * - ****************************************************************************/ - -#ifndef __CHETHTOOL_LINUX_H__ -#define __CHETHTOOL_LINUX_H__ - -/* TCB size in 32-bit words */ -#define TCB_WORDS (TCB_SIZE / 4) - -enum { - ETHTOOL_SETREG, - ETHTOOL_GETREG, - ETHTOOL_SETTPI, - ETHTOOL_GETTPI, - ETHTOOL_DEVUP, - ETHTOOL_GETMTUTAB, - ETHTOOL_SETMTUTAB, - ETHTOOL_GETMTU, - ETHTOOL_SET_PM, - ETHTOOL_GET_PM, - ETHTOOL_GET_TCAM, - ETHTOOL_SET_TCAM, - ETHTOOL_GET_TCB, - ETHTOOL_READ_TCAM_WORD, -}; - -struct ethtool_reg { - uint32_t cmd; - uint32_t addr; - uint32_t val; -}; - -struct ethtool_mtus { - uint32_t cmd; - uint16_t mtus[NMTUS]; -}; - -struct ethtool_pm { - uint32_t cmd; - uint32_t tx_pg_sz; - uint32_t tx_num_pg; - uint32_t rx_pg_sz; - uint32_t rx_num_pg; - uint32_t pm_total; -}; - -struct ethtool_tcam { - uint32_t cmd; - uint32_t tcam_size; - uint32_t nservers; - uint32_t nroutes; -}; - -struct ethtool_tcb { - uint32_t cmd; - uint32_t tcb_index; - uint32_t tcb_data[TCB_WORDS]; -}; - -struct ethtool_tcam_word { - uint32_t cmd; - uint32_t addr; - uint32_t buf[3]; -}; - -#define SIOCCHETHTOOL SIOCDEVPRIVATE -#endif diff --git a/drivers/net/chelsio/common.h b/drivers/net/chelsio/common.h index 017684ff48d..f09348802b4 100644 --- a/drivers/net/chelsio/common.h +++ b/drivers/net/chelsio/common.h @@ -1,8 +1,8 @@ /***************************************************************************** * * * File: common.h * - * $Revision: 1.5 $ * - * $Date: 2005/03/23 07:41:27 $ * + * $Revision: 1.21 $ * + * $Date: 2005/06/22 00:43:25 $ * * Description: * * part of the Chelsio 10Gb Ethernet Driver. * * * @@ -36,74 +36,101 @@ * * ****************************************************************************/ -#ifndef CHELSIO_COMMON_H -#define CHELSIO_COMMON_H +#ifndef _CXGB_COMMON_H_ +#define _CXGB_COMMON_H_ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#define DRV_DESCRIPTION "Chelsio 10Gb Ethernet Driver" +#define DRV_NAME "cxgb" +#define DRV_VERSION "2.1.1" +#define PFX DRV_NAME ": " + +#define CH_ERR(fmt, ...) printk(KERN_ERR PFX fmt, ## __VA_ARGS__) +#define CH_WARN(fmt, ...) printk(KERN_WARNING PFX fmt, ## __VA_ARGS__) +#define CH_ALERT(fmt, ...) printk(KERN_ALERT PFX fmt, ## __VA_ARGS__) + +#define CH_DEVICE(devid, ssid, idx) \ + { PCI_VENDOR_ID_CHELSIO, devid, PCI_ANY_ID, ssid, 0, 0, idx } + +#define SUPPORTED_PAUSE (1 << 13) +#define SUPPORTED_LOOPBACK (1 << 15) + +#define ADVERTISED_PAUSE (1 << 13) +#define ADVERTISED_ASYM_PAUSE (1 << 14) + +typedef struct adapter adapter_t; + +void t1_elmer0_ext_intr(adapter_t *adapter); +void t1_link_changed(adapter_t *adapter, int port_id, int link_status, + int speed, int duplex, int fc); + +struct t1_rx_mode { + struct net_device *dev; + u32 idx; + struct dev_mc_list *list; +}; + +#define t1_rx_mode_promisc(rm) (rm->dev->flags & IFF_PROMISC) +#define t1_rx_mode_allmulti(rm) (rm->dev->flags & IFF_ALLMULTI) +#define t1_rx_mode_mc_cnt(rm) (rm->dev->mc_count) + +static inline u8 *t1_get_next_mcaddr(struct t1_rx_mode *rm) +{ + u8 *addr = 0; -#define DIMOF(x) (sizeof(x)/sizeof(x[0])) + if (rm->idx++ < rm->dev->mc_count) { + addr = rm->list->dmi_addr; + rm->list = rm->list->next; + } + return addr; +} + +#define MAX_NPORTS 4 -#define NMTUS 8 -#define MAX_NPORTS 4 -#define TCB_SIZE 128 +#define SPEED_INVALID 0xffff +#define DUPLEX_INVALID 0xff enum { - CHBT_BOARD_7500, - CHBT_BOARD_8000, - CHBT_BOARD_CHT101, - CHBT_BOARD_CHT110, - CHBT_BOARD_CHT210, - CHBT_BOARD_CHT204, CHBT_BOARD_N110, - CHBT_BOARD_N210, - CHBT_BOARD_COUGAR, - CHBT_BOARD_6800, - CHBT_BOARD_SIMUL + CHBT_BOARD_N210 }; enum { - CHBT_TERM_FPGA, CHBT_TERM_T1, - CHBT_TERM_T2, - CHBT_TERM_T3 + CHBT_TERM_T2 }; enum { - CHBT_MAC_CHELSIO_A, - CHBT_MAC_IXF1010, CHBT_MAC_PM3393, - CHBT_MAC_VSC7321, - CHBT_MAC_DUMMY }; enum { - CHBT_PHY_88E1041, - CHBT_PHY_88E1111, CHBT_PHY_88X2010, - CHBT_PHY_XPAK, - CHBT_PHY_MY3126, - CHBT_PHY_DUMMY }; enum { - PAUSE_RX = 1, - PAUSE_TX = 2, - PAUSE_AUTONEG = 4 + PAUSE_RX = 1 << 0, + PAUSE_TX = 1 << 1, + PAUSE_AUTONEG = 1 << 2 }; /* Revisions of T1 chip */ -#define TERM_T1A 0 -#define TERM_T1B 1 -#define TERM_T2 3 - -struct tp_params { - unsigned int pm_size; - unsigned int cm_size; - unsigned int pm_rx_base; - unsigned int pm_tx_base; - unsigned int pm_rx_pg_size; - unsigned int pm_tx_pg_size; - unsigned int pm_rx_num_pgs; - unsigned int pm_tx_num_pgs; - unsigned int use_5tuple_mode; +enum { + TERM_T1A = 0, + TERM_T1B = 1, + TERM_T2 = 3 }; struct sge_params { @@ -118,17 +145,7 @@ struct sge_params { unsigned int polling; }; -struct mc5_params { - unsigned int mode; /* selects MC5 width */ - unsigned int nservers; /* size of server region */ - unsigned int nroutes; /* size of routing region */ -}; - -/* Default MC5 region sizes */ -#define DEFAULT_SERVER_REGION_LEN 256 -#define DEFAULT_RT_REGION_LEN 1024 - -struct pci_params { +struct chelsio_pci_params { unsigned short speed; unsigned char width; unsigned char is_pcix; @@ -136,31 +153,14 @@ struct pci_params { struct adapter_params { struct sge_params sge; - struct mc5_params mc5; - struct tp_params tp; - struct pci_params pci; + struct chelsio_pci_params pci; const struct board_info *brd_info; - unsigned short mtus[NMTUS]; - unsigned int nports; /* # of ethernet ports */ + unsigned int nports; /* # of ethernet ports */ unsigned int stats_update_period; unsigned short chip_revision; unsigned char chip_version; - unsigned char is_asic; -}; - -struct pci_err_cnt { - unsigned int master_parity_err; - unsigned int sig_target_abort; - unsigned int rcv_target_abort; - unsigned int rcv_master_abort; - unsigned int sig_sys_err; - unsigned int det_parity_err; - unsigned int pio_parity_err; - unsigned int wf_parity_err; - unsigned int rf_parity_err; - unsigned int cf_parity_err; }; struct link_config { @@ -175,8 +175,60 @@ struct link_config { unsigned char autoneg; /* autonegotiating? */ }; -#define SPEED_INVALID 0xffff -#define DUPLEX_INVALID 0xff +struct cmac; +struct cphy; + +struct port_info { + struct net_device *dev; + struct cmac *mac; + struct cphy *phy; + struct link_config link_config; + struct net_device_stats netstats; +}; + +struct sge; +struct peespi; + +struct adapter { + u8 *regs; + struct pci_dev *pdev; + unsigned long registered_device_map; + unsigned long open_device_map; + unsigned long flags; + + const char *name; + int msg_enable; + u32 mmio_len; + + struct work_struct ext_intr_handler_task; + struct adapter_params params; + + struct vlan_group *vlan_grp; + + /* Terminator modules. */ + struct sge *sge; + struct peespi *espi; + + struct port_info port[MAX_NPORTS]; + struct work_struct stats_update_task; + struct timer_list stats_update_timer; + + struct semaphore mib_mutex; + spinlock_t tpi_lock; + spinlock_t work_lock; + /* guards async operations */ + spinlock_t async_lock ____cacheline_aligned; + u32 slow_intr_mask; +}; + +enum { /* adapter flags */ + FULL_INIT_DONE = 1 << 0, + TSO_CAPABLE = 1 << 2, + TCP_CSUM_CAPABLE = 1 << 3, + UDP_CSUM_CAPABLE = 1 << 4, + VLAN_ACCEL_CAPABLE = 1 << 5, + RX_CSUM_ENABLED = 1 << 6, +}; struct mdio_ops; struct gmac; @@ -205,19 +257,8 @@ struct board_info { const char *desc; }; -#include "osdep.h" - -#ifndef PCI_VENDOR_ID_CHELSIO -#define PCI_VENDOR_ID_CHELSIO 0x1425 -#endif - extern struct pci_device_id t1_pci_tbl[]; -static inline int t1_is_asic(const adapter_t *adapter) -{ - return adapter->params.is_asic; -} - static inline int adapter_matches_type(const adapter_t *adapter, int version, int revision) { @@ -245,25 +286,29 @@ static inline unsigned int core_ticks_per_usec(const adapter_t *adap) return board_info(adap)->clock_core / 1000000; } -int t1_tpi_write(adapter_t *adapter, u32 addr, u32 value); -int t1_tpi_read(adapter_t *adapter, u32 addr, u32 *value); +extern int t1_tpi_write(adapter_t *adapter, u32 addr, u32 value); +extern int t1_tpi_read(adapter_t *adapter, u32 addr, u32 *value); -void t1_interrupts_enable(adapter_t *adapter); -void t1_interrupts_disable(adapter_t *adapter); -void t1_interrupts_clear(adapter_t *adapter); -int elmer0_ext_intr_handler(adapter_t *adapter); -int t1_slow_intr_handler(adapter_t *adapter); +extern void t1_interrupts_enable(adapter_t *adapter); +extern void t1_interrupts_disable(adapter_t *adapter); +extern void t1_interrupts_clear(adapter_t *adapter); +extern int elmer0_ext_intr_handler(adapter_t *adapter); +extern int t1_slow_intr_handler(adapter_t *adapter); -int t1_link_start(struct cphy *phy, struct cmac *mac, struct link_config *lc); -const struct board_info *t1_get_board_info(unsigned int board_id); -const struct board_info *t1_get_board_info_from_ids(unsigned int devid, +extern int t1_link_start(struct cphy *phy, struct cmac *mac, struct link_config *lc); +extern const struct board_info *t1_get_board_info(unsigned int board_id); +extern const struct board_info *t1_get_board_info_from_ids(unsigned int devid, unsigned short ssid); -int t1_seeprom_read(adapter_t *adapter, u32 addr, u32 *data); -int t1_get_board_rev(adapter_t *adapter, const struct board_info *bi, +extern int t1_seeprom_read(adapter_t *adapter, u32 addr, u32 *data); +extern int t1_get_board_rev(adapter_t *adapter, const struct board_info *bi, struct adapter_params *p); -int t1_init_hw_modules(adapter_t *adapter); -int t1_init_sw_modules(adapter_t *adapter, const struct board_info *bi); -void t1_free_sw_modules(adapter_t *adapter); -void t1_fatal_err(adapter_t *adapter); -#endif +extern int t1_init_hw_modules(adapter_t *adapter); +extern int t1_init_sw_modules(adapter_t *adapter, const struct board_info *bi); +extern void t1_free_sw_modules(adapter_t *adapter); +extern void t1_fatal_err(adapter_t *adapter); + +extern void t1_tp_set_udp_checksum_offload(adapter_t *adapter, int enable); +extern void t1_tp_set_tcp_checksum_offload(adapter_t *adapter, int enable); +extern void t1_tp_set_ip_checksum_offload(adapter_t *adapter, int enable); +#endif /* _CXGB_COMMON_H_ */ diff --git a/drivers/net/chelsio/cphy.h b/drivers/net/chelsio/cphy.h index 1bc2248264c..3412342f734 100644 --- a/drivers/net/chelsio/cphy.h +++ b/drivers/net/chelsio/cphy.h @@ -1,8 +1,8 @@ /***************************************************************************** * * * File: cphy.h * - * $Revision: 1.4 $ * - * $Date: 2005/03/23 07:41:27 $ * + * $Revision: 1.7 $ * + * $Date: 2005/06/21 18:29:47 $ * * Description: * * part of the Chelsio 10Gb Ethernet Driver. * * * @@ -36,8 +36,8 @@ * * ****************************************************************************/ -#ifndef CHELSIO_CPHY_H -#define CHELSIO_CPHY_H +#ifndef _CXGB_CPHY_H_ +#define _CXGB_CPHY_H_ #include "common.h" @@ -142,9 +142,7 @@ struct gphy { int (*reset)(adapter_t *adapter); }; -extern struct gphy t1_my3126_ops; -extern struct gphy t1_mv88e1xxx_ops; -extern struct gphy t1_xpak_ops; extern struct gphy t1_mv88x201x_ops; extern struct gphy t1_dummy_phy_ops; -#endif + +#endif /* _CXGB_CPHY_H_ */ diff --git a/drivers/net/chelsio/cpl5_cmd.h b/drivers/net/chelsio/cpl5_cmd.h index 45e9248979f..27925e487bc 100644 --- a/drivers/net/chelsio/cpl5_cmd.h +++ b/drivers/net/chelsio/cpl5_cmd.h @@ -1,8 +1,8 @@ /***************************************************************************** * * * File: cpl5_cmd.h * - * $Revision: 1.4 $ * - * $Date: 2005/03/23 07:15:58 $ * + * $Revision: 1.6 $ * + * $Date: 2005/06/21 18:29:47 $ * * Description: * * part of the Chelsio 10Gb Ethernet Driver. * * * @@ -36,8 +36,8 @@ * * ****************************************************************************/ -#ifndef _CPL5_CMD_H -#define _CPL5_CMD_H +#ifndef _CXGB_CPL5_CMD_H_ +#define _CXGB_CPL5_CMD_H_ #include @@ -59,12 +59,12 @@ enum { /* TX_PKT_LSO ethernet types */ }; struct cpl_rx_data { - __u32 rsvd0; - __u32 len; - __u32 seq; - __u16 urg; - __u8 rsvd1; - __u8 status; + u32 rsvd0; + u32 len; + u32 seq; + u16 urg; + u8 rsvd1; + u8 status; }; /* @@ -73,73 +73,73 @@ struct cpl_rx_data { * used so we break it into 2 16-bit parts to easily meet our alignment needs. */ struct cpl_tx_pkt { - __u8 opcode; + u8 opcode; #if defined(__LITTLE_ENDIAN_BITFIELD) - __u8 iff:4; - __u8 ip_csum_dis:1; - __u8 l4_csum_dis:1; - __u8 vlan_valid:1; - __u8 rsvd:1; + u8 iff:4; + u8 ip_csum_dis:1; + u8 l4_csum_dis:1; + u8 vlan_valid:1; + u8 rsvd:1; #else - __u8 rsvd:1; - __u8 vlan_valid:1; - __u8 l4_csum_dis:1; - __u8 ip_csum_dis:1; - __u8 iff:4; + u8 rsvd:1; + u8 vlan_valid:1; + u8 l4_csum_dis:1; + u8 ip_csum_dis:1; + u8 iff:4; #endif - __u16 vlan; - __u16 len_hi; - __u16 len_lo; + u16 vlan; + u16 len_hi; + u16 len_lo; }; struct cpl_tx_pkt_lso { - __u8 opcode; + u8 opcode; #if defined(__LITTLE_ENDIAN_BITFIELD) - __u8 iff:4; - __u8 ip_csum_dis:1; - __u8 l4_csum_dis:1; - __u8 vlan_valid:1; - __u8 rsvd:1; + u8 iff:4; + u8 ip_csum_dis:1; + u8 l4_csum_dis:1; + u8 vlan_valid:1; + u8 rsvd:1; #else - __u8 rsvd:1; - __u8 vlan_valid:1; - __u8 l4_csum_dis:1; - __u8 ip_csum_dis:1; - __u8 iff:4; + u8 rsvd:1; + u8 vlan_valid:1; + u8 l4_csum_dis:1; + u8 ip_csum_dis:1; + u8 iff:4; #endif - __u16 vlan; - __u32 len; + u16 vlan; + u32 len; - __u32 rsvd2; - __u8 rsvd3; + u32 rsvd2; + u8 rsvd3; #if defined(__LITTLE_ENDIAN_BITFIELD) - __u8 tcp_hdr_words:4; - __u8 ip_hdr_words:4; + u8 tcp_hdr_words:4; + u8 ip_hdr_words:4; #else - __u8 ip_hdr_words:4; - __u8 tcp_hdr_words:4; + u8 ip_hdr_words:4; + u8 tcp_hdr_words:4; #endif - __u16 eth_type_mss; + u16 eth_type_mss; }; struct cpl_rx_pkt { - __u8 opcode; + u8 opcode; #if defined(__LITTLE_ENDIAN_BITFIELD) - __u8 iff:4; - __u8 csum_valid:1; - __u8 bad_pkt:1; - __u8 vlan_valid:1; - __u8 rsvd:1; + u8 iff:4; + u8 csum_valid:1; + u8 bad_pkt:1; + u8 vlan_valid:1; + u8 rsvd:1; #else - __u8 rsvd:1; - __u8 vlan_valid:1; - __u8 bad_pkt:1; - __u8 csum_valid:1; - __u8 iff:4; + u8 rsvd:1; + u8 vlan_valid:1; + u8 bad_pkt:1; + u8 csum_valid:1; + u8 iff:4; #endif - __u16 csum; - __u16 vlan; - __u16 len; + u16 csum; + u16 vlan; + u16 len; }; -#endif +#endif /* _CXGB_CPL5_CMD_H_ */ diff --git a/drivers/net/chelsio/cxgb2.c b/drivers/net/chelsio/cxgb2.c index 48c4d5acfcd..28ae478b386 100644 --- a/drivers/net/chelsio/cxgb2.c +++ b/drivers/net/chelsio/cxgb2.c @@ -1,8 +1,8 @@ /***************************************************************************** * * * File: cxgb2.c * - * $Revision: 1.11 $ * - * $Date: 2005/03/23 07:41:27 $ * + * $Revision: 1.25 $ * + * $Date: 2005/06/22 00:43:25 $ * * Description: * * Chelsio 10Gb Ethernet Driver. * * * @@ -37,7 +37,6 @@ ****************************************************************************/ #include "common.h" - #include #include #include @@ -48,44 +47,56 @@ #include #include #include -#include -#include +#include #include -#include "ch_ethtool.h" #include "cpl5_cmd.h" #include "regs.h" #include "gmac.h" #include "cphy.h" #include "sge.h" -#include "tp.h" #include "espi.h" +#ifdef work_struct +#include +#define INIT_WORK INIT_TQUEUE +#define schedule_work schedule_task +#define flush_scheduled_work flush_scheduled_tasks + static inline void schedule_mac_stats_update(struct adapter *ap, int secs) { - schedule_delayed_work(&ap->stats_update_task, secs * HZ); + mod_timer(&ap->stats_update_timer, jiffies + secs * HZ); } static inline void cancel_mac_stats_update(struct adapter *ap) { - cancel_delayed_work(&ap->stats_update_task); + del_timer_sync(&ap->stats_update_timer); + flush_scheduled_tasks(); } -#if BITS_PER_LONG == 64 && !defined(CONFIG_X86_64) -# define FMT64 "l" -#else -# define FMT64 "ll" -#endif +/* + * Stats update timer for 2.4. It schedules a task to do the actual update as + * we need to access MAC statistics in process context. + */ +static void mac_stats_timer(unsigned long data) +{ + struct adapter *ap = (struct adapter *)data; -# define DRV_TYPE "" -# define MODULE_DESC "Chelsio Network Driver" + schedule_task(&ap->stats_update_task); +} +#else +#include -static char driver_name[] = DRV_NAME; -static char driver_string[] = "Chelsio " DRV_TYPE "Network Driver"; -static char driver_version[] = "2.1.0"; +static inline void schedule_mac_stats_update(struct adapter *ap, int secs) +{ + schedule_delayed_work(&ap->stats_update_task, secs * HZ); +} -#define PCI_DMA_64BIT ~0ULL -#define PCI_DMA_32BIT 0xffffffffULL +static inline void cancel_mac_stats_update(struct adapter *ap) +{ + cancel_delayed_work(&ap->stats_update_task); +} +#endif #define MAX_CMDQ_ENTRIES 16384 #define MAX_CMDQ1_ENTRIES 1024 @@ -107,10 +118,9 @@ static char driver_version[] = "2.1.0"; */ #define EEPROM_SIZE 32 -MODULE_DESCRIPTION(MODULE_DESC); +MODULE_DESCRIPTION(DRV_DESCRIPTION); MODULE_AUTHOR("Chelsio Communications"); MODULE_LICENSE("GPL"); -MODULE_DEVICE_TABLE(pci, t1_pci_tbl); static int dflt_msg_enable = DFLT_MSG_ENABLE; @@ -140,17 +150,17 @@ static void t1_set_rxmode(struct net_device *dev) static void link_report(struct port_info *p) { if (!netif_carrier_ok(p->dev)) - printk(KERN_INFO "%s: link is down\n", p->dev->name); + printk(KERN_INFO "%s: link down\n", p->dev->name); else { - const char *s = "10 Mbps"; + const char *s = "10Mbps"; switch (p->link_config.speed) { - case SPEED_10000: s = "10 Gbps"; break; - case SPEED_1000: s = "1000 Mbps"; break; - case SPEED_100: s = "100 Mbps"; break; + case SPEED_10000: s = "10Gbps"; break; + case SPEED_1000: s = "1000Mbps"; break; + case SPEED_100: s = "100Mbps"; break; } - printk(KERN_INFO "%s: link is up at %s, %s duplex\n", + printk(KERN_INFO "%s: link up, %s, %s-duplex\n", p->dev->name, s, p->link_config.duplex == DUPLEX_FULL ? "full" : "half"); } @@ -186,10 +196,8 @@ static void link_start(struct port_info *p) static void enable_hw_csum(struct adapter *adapter) { if (adapter->flags & TSO_CAPABLE) - t1_tp_set_ip_checksum_offload(adapter->tp, 1); /* for TSO only */ - if (adapter->flags & UDP_CSUM_CAPABLE) - t1_tp_set_udp_checksum_offload(adapter->tp, 1); - t1_tp_set_tcp_checksum_offload(adapter->tp, 1); + t1_tp_set_ip_checksum_offload(adapter, 1); /* for TSO only */ + t1_tp_set_tcp_checksum_offload(adapter, 1); } /* @@ -210,15 +218,13 @@ static int cxgb_up(struct adapter *adapter) } t1_interrupts_clear(adapter); - - if ((err = request_irq(adapter->pdev->irq, &t1_interrupt, SA_SHIRQ, - adapter->name, adapter))) + if ((err = request_irq(adapter->pdev->irq, + t1_select_intr_handler(adapter), SA_SHIRQ, + adapter->name, adapter))) { goto out_err; - + } t1_sge_start(adapter->sge); t1_interrupts_enable(adapter); - - err = 0; out_err: return err; } @@ -339,47 +345,80 @@ static void set_msglevel(struct net_device *dev, u32 val) } static char stats_strings[][ETH_GSTRING_LEN] = { - "TxOctetsOK", - "TxOctetsBad", - "TxUnicastFramesOK", - "TxMulticastFramesOK", - "TxBroadcastFramesOK", - "TxPauseFrames", - "TxFramesWithDeferredXmissions", - "TxLateCollisions", - "TxTotalCollisions", - "TxFramesAbortedDueToXSCollisions", - "TxUnderrun", - "TxLengthErrors", - "TxInternalMACXmitError", - "TxFramesWithExcessiveDeferral", - "TxFCSErrors", - - "RxOctetsOK", - "RxOctetsBad", - "RxUnicastFramesOK", - "RxMulticastFramesOK", - "RxBroadcastFramesOK", - "RxPauseFrames", - "RxFCSErrors", - "RxAlignErrors", - "RxSymbolErrors", - "RxDataErrors", - "RxSequenceErrors", - "RxRuntErrors", - "RxJabberErrors", - "RxInternalMACRcvError", - "RxInRangeLengthErrors", - "RxOutOfRangeLengthField", - "RxFrameTooLongErrors" + "TxOctetsOK", + "TxOctetsBad", + "TxUnicastFramesOK", + "TxMulticastFramesOK", + "TxBroadcastFramesOK", + "TxPauseFrames", + "TxFramesWithDeferredXmissions", + "TxLateCollisions", + "TxTotalCollisions", + "TxFramesAbortedDueToXSCollisions", + "TxUnderrun", + "TxLengthErrors", + "TxInternalMACXmitError", + "TxFramesWithExcessiveDeferral", + "TxFCSErrors", + + "RxOctetsOK", + "RxOctetsBad", + "RxUnicastFramesOK", + "RxMulticastFramesOK", + "RxBroadcastFramesOK", + "RxPauseFrames", + "RxFCSErrors", + "RxAlignErrors", + "RxSymbolErrors", + "RxDataErrors", + "RxSequenceErrors", + "RxRuntErrors", + "RxJabberErrors", + "RxInternalMACRcvError", + "RxInRangeLengthErrors", + "RxOutOfRangeLengthField", + "RxFrameTooLongErrors", + + "TSO", + "VLANextractions", + "VLANinsertions", + "RxCsumGood", + "TxCsumOffload", + "RxDrops" + + "respQ_empty", + "respQ_overflow", + "freelistQ_empty", + "pkt_too_big", + "pkt_mismatch", + "cmdQ_full0", + "cmdQ_full1", + "tx_ipfrags", + "tx_reg_pkts", + "tx_lso_pkts", + "tx_do_cksum", + + "espi_DIP2ParityErr", + "espi_DIP4Err", + "espi_RxDrops", + "espi_TxDrops", + "espi_RxOvfl", + "espi_ParityErr" }; + +#define T2_REGMAP_SIZE (3 * 1024) + +static int get_regs_len(struct net_device *dev) +{ + return T2_REGMAP_SIZE; +} static void get_drvinfo(struct net_device *dev, struct ethtool_drvinfo *info) { struct adapter *adapter = dev->priv; - strcpy(info->driver, driver_name); - strcpy(info->version, driver_version); + strcpy(info->driver, DRV_NAME); + strcpy(info->version, DRV_VERSION); strcpy(info->fw_version, "N/A"); strcpy(info->bus_info, pci_name(adapter->pdev)); } @@ -401,42 +440,88 @@ static void get_stats(struct net_device *dev, struct ethtool_stats *stats, struct adapter *adapter = dev->priv; struct cmac *mac = adapter->port[dev->if_port].mac; const struct cmac_statistics *s; + const struct sge_port_stats *ss; + const struct sge_intr_counts *t; s = mac->ops->statistics_update(mac, MAC_STATS_UPDATE_FULL); + ss = t1_sge_get_port_stats(adapter->sge, dev->if_port); + t = t1_sge_get_intr_counts(adapter->sge); + + *data++ = s->TxOctetsOK; + *data++ = s->TxOctetsBad; + *data++ = s->TxUnicastFramesOK; + *data++ = s->TxMulticastFramesOK; + *data++ = s->TxBroadcastFramesOK; + *data++ = s->TxPauseFrames; + *data++ = s->TxFramesWithDeferredXmissions; + *data++ = s->TxLateCollisions; + *data++ = s->TxTotalCollisions; + *data++ = s->TxFramesAbortedDueToXSCollisions; + *data++ = s->TxUnderrun; + *data++ = s->TxLengthErrors; + *data++ = s->TxInternalMACXmitError; + *data++ = s->TxFramesWithExcessiveDeferral; + *data++ = s->TxFCSErrors; + + *data++ = s->RxOctetsOK; + *data++ = s->RxOctetsBad; + *data++ = s->RxUnicastFramesOK; + *data++ = s->RxMulticastFramesOK; + *data++ = s->RxBroadcastFramesOK; + *data++ = s->RxPauseFrames; + *data++ = s->RxFCSErrors; + *data++ = s->RxAlignErrors; + *data++ = s->RxSymbolErrors; + *data++ = s->RxDataErrors; + *data++ = s->RxSequenceErrors; + *data++ = s->RxRuntErrors; + *data++ = s->RxJabberErrors; + *data++ = s->RxInternalMACRcvError; + *data++ = s->RxInRangeLengthErrors; + *data++ = s->RxOutOfRangeLengthField; + *data++ = s->RxFrameTooLongErrors; + + *data++ = ss->tso; + *data++ = ss->vlan_xtract; + *data++ = ss->vlan_insert; + *data++ = ss->rx_cso_good; + *data++ = ss->tx_cso; + *data++ = ss->rx_drops; + + *data++ = (u64)t->respQ_empty; + *data++ = (u64)t->respQ_overflow; + *data++ = (u64)t->freelistQ_empty; + *data++ = (u64)t->pkt_too_big; + *data++ = (u64)t->pkt_mismatch; + *data++ = (u64)t->cmdQ_full[0]; + *data++ = (u64)t->cmdQ_full[1]; + *data++ = (u64)t->tx_ipfrags; + *data++ = (u64)t->tx_reg_pkts; + *data++ = (u64)t->tx_lso_pkts; + *data++ = (u64)t->tx_do_cksum; +} + +static inline void reg_block_dump(struct adapter *ap, void *buf, + unsigned int start, unsigned int end) +{ + u32 *p = buf + start; + + for ( ; start <= end; start += sizeof(u32)) + *p++ = readl(ap->regs + start); +} - *data++ = s->TxOctetsOK; - *data++ = s->TxOctetsBad; - *data++ = s->TxUnicastFramesOK; - *data++ = s->TxMulticastFramesOK; - *data++ = s->TxBroadcastFramesOK; - *data++ = s->TxPauseFrames; - *data++ = s->TxFramesWithDeferredXmissions; - *data++ = s->TxLateCollisions; - *data++ = s->TxTotalCollisions; - *data++ = s->TxFramesAbortedDueToXSCollisions; - *data++ = s->TxUnderrun; - *data++ = s->TxLengthErrors; - *data++ = s->TxInternalMACXmitError; - *data++ = s->TxFramesWithExcessiveDeferral; - *data++ = s->TxFCSErrors; - - *data++ = s->RxOctetsOK; - *data++ = s->RxOctetsBad; - *data++ = s->RxUnicastFramesOK; - *data++ = s->RxMulticastFramesOK; - *data++ = s->RxBroadcastFramesOK; - *data++ = s->RxPauseFrames; - *data++ = s->RxFCSErrors; - *data++ = s->RxAlignErrors; - *data++ = s->RxSymbolErrors; - *data++ = s->RxDataErrors; - *data++ = s->RxSequenceErrors; - *data++ = s->RxRuntErrors; - *data++ = s->RxJabberErrors; - *data++ = s->RxInternalMACRcvError; - *data++ = s->RxInRangeLengthErrors; - *data++ = s->RxOutOfRangeLengthField; - *data++ = s->RxFrameTooLongErrors; +static void get_regs(struct net_device *dev, struct ethtool_regs *regs, + void *buf) +{ + struct adapter *ap = dev->priv; + + /* + * Version scheme: bits 0..9: chip version, bits 10..15: chip revision + */ + regs->version = 2; + + memset(buf, 0, T2_REGMAP_SIZE); + reg_block_dump(ap, buf, 0, A_SG_RESPACCUTIMER); } static int get_settings(struct net_device *dev, struct ethtool_cmd *cmd) @@ -455,12 +540,12 @@ static int get_settings(struct net_device *dev, struct ethtool_cmd *cmd) cmd->duplex = -1; } - cmd->port = (cmd->supported & SUPPORTED_TP) ? PORT_TP : PORT_FIBRE; - cmd->phy_address = p->phy->addr; - cmd->transceiver = XCVR_EXTERNAL; - cmd->autoneg = p->link_config.autoneg; - cmd->maxtxpkt = 0; - cmd->maxrxpkt = 0; + cmd->port = (cmd->supported & SUPPORTED_TP) ? PORT_TP : PORT_FIBRE; + cmd->phy_address = p->phy->addr; + cmd->transceiver = XCVR_EXTERNAL; + cmd->autoneg = p->link_config.autoneg; + cmd->maxtxpkt = 0; + cmd->maxrxpkt = 0; return 0; } @@ -506,7 +591,7 @@ static int set_settings(struct net_device *dev, struct ethtool_cmd *cmd) struct link_config *lc = &p->link_config; if (!(lc->supported & SUPPORTED_Autoneg)) - return -EOPNOTSUPP; /* can't change speed/duplex */ + return -EOPNOTSUPP; /* can't change speed/duplex */ if (cmd->autoneg == AUTONEG_DISABLE) { int cap = speed_duplex_to_caps(cmd->speed, cmd->duplex); @@ -631,7 +716,7 @@ static int set_sge_param(struct net_device *dev, struct ethtool_ringparam *e) return -EINVAL; if (adapter->flags & FULL_INIT_DONE) - return -EBUSY; + return -EBUSY; adapter->params.sge.freelQ_size[!jumbo_fl] = e->rx_pending; adapter->params.sge.freelQ_size[jumbo_fl] = e->rx_jumbo_pending; @@ -645,22 +730,20 @@ static int set_coalesce(struct net_device *dev, struct ethtool_coalesce *c) { struct adapter *adapter = dev->priv; - unsigned int sge_coalesce_usecs = 0; + /* + * If RX coalescing is requested we use NAPI, otherwise interrupts. + * This choice can be made only when all ports and the TOE are off. + */ + if (adapter->open_device_map == 0) + adapter->params.sge.polling = c->use_adaptive_rx_coalesce; - sge_coalesce_usecs = adapter->params.sge.last_rx_coalesce_raw; - sge_coalesce_usecs /= board_info(adapter)->clock_core / 1000000; - if ( (adapter->params.sge.coalesce_enable && !c->use_adaptive_rx_coalesce) && - (c->rx_coalesce_usecs == sge_coalesce_usecs) ) { - adapter->params.sge.rx_coalesce_usecs = - adapter->params.sge.default_rx_coalesce_usecs; + if (adapter->params.sge.polling) { + adapter->params.sge.rx_coalesce_usecs = 0; } else { adapter->params.sge.rx_coalesce_usecs = c->rx_coalesce_usecs; } - - adapter->params.sge.last_rx_coalesce_raw = adapter->params.sge.rx_coalesce_usecs; - adapter->params.sge.last_rx_coalesce_raw *= (board_info(adapter)->clock_core / 1000000); + adapter->params.sge.coalesce_enable = c->use_adaptive_rx_coalesce; adapter->params.sge.sample_interval_usecs = c->rate_sample_interval; - adapter->params.sge.coalesce_enable = c->use_adaptive_rx_coalesce; t1_sge_set_coalesce_params(adapter->sge, &adapter->params.sge); return 0; } @@ -669,12 +752,7 @@ static int get_coalesce(struct net_device *dev, struct ethtool_coalesce *c) { struct adapter *adapter = dev->priv; - if (adapter->params.sge.coalesce_enable) { /* Adaptive algorithm on */ - c->rx_coalesce_usecs = adapter->params.sge.last_rx_coalesce_raw; - c->rx_coalesce_usecs /= board_info(adapter)->clock_core / 1000000; - } else { - c->rx_coalesce_usecs = adapter->params.sge.rx_coalesce_usecs; - } + c->rx_coalesce_usecs = adapter->params.sge.rx_coalesce_usecs; c->rate_sample_interval = adapter->params.sge.sample_interval_usecs; c->use_adaptive_rx_coalesce = adapter->params.sge.coalesce_enable; return 0; @@ -682,9 +760,7 @@ static int get_coalesce(struct net_device *dev, struct ethtool_coalesce *c) static int get_eeprom_len(struct net_device *dev) { - struct adapter *adapter = dev->priv; - - return t1_is_asic(adapter) ? EEPROM_SIZE : 0; + return EEPROM_SIZE; } #define EEPROM_MAGIC(ap) \ @@ -728,118 +804,55 @@ static struct ethtool_ops t1_ethtool_ops = { .get_strings = get_strings, .get_stats_count = get_stats_count, .get_ethtool_stats = get_stats, + .get_regs_len = get_regs_len, + .get_regs = get_regs, .get_tso = ethtool_op_get_tso, .set_tso = set_tso, }; -static int ethtool_ioctl(struct net_device *dev, void *useraddr) +static void cxgb_proc_cleanup(struct adapter *adapter, + struct proc_dir_entry *dir) { - u32 cmd; - struct adapter *adapter = dev->priv; - - if (copy_from_user(&cmd, useraddr, sizeof(cmd))) - return -EFAULT; - - switch (cmd) { - case ETHTOOL_SETREG: { - struct ethtool_reg edata; - - if (!capable(CAP_NET_ADMIN)) - return -EPERM; - if (copy_from_user(&edata, useraddr, sizeof(edata))) - return -EFAULT; - if ((edata.addr & 3) != 0 || edata.addr >= adapter->mmio_len) - return -EINVAL; - if (edata.addr == A_ESPI_MISC_CONTROL) - t1_espi_set_misc_ctrl(adapter, edata.val); - else { - if (edata.addr == 0x950) - t1_sge_set_ptimeout(adapter, edata.val); - else - writel(edata.val, adapter->regs + edata.addr); - } - break; - } - case ETHTOOL_GETREG: { - struct ethtool_reg edata; - - if (copy_from_user(&edata, useraddr, sizeof(edata))) - return -EFAULT; - if ((edata.addr & 3) != 0 || edata.addr >= adapter->mmio_len) - return -EINVAL; - if (edata.addr >= 0x900 && edata.addr <= 0x93c) - edata.val = t1_espi_get_mon(adapter, edata.addr, 1); - else { - if (edata.addr == 0x950) - edata.val = t1_sge_get_ptimeout(adapter); - else - edata.val = readl(adapter->regs + edata.addr); - } - if (copy_to_user(useraddr, &edata, sizeof(edata))) - return -EFAULT; - break; - } - case ETHTOOL_SETTPI: { - struct ethtool_reg edata; - - if (!capable(CAP_NET_ADMIN)) - return -EPERM; - if (copy_from_user(&edata, useraddr, sizeof(edata))) - return -EFAULT; - if ((edata.addr & 3) != 0) - return -EINVAL; - t1_tpi_write(adapter, edata.addr, edata.val); - break; - } - case ETHTOOL_GETTPI: { - struct ethtool_reg edata; - - if (copy_from_user(&edata, useraddr, sizeof(edata))) - return -EFAULT; - if ((edata.addr & 3) != 0) - return -EINVAL; - t1_tpi_read(adapter, edata.addr, &edata.val); - if (copy_to_user(useraddr, &edata, sizeof(edata))) - return -EFAULT; - break; - } - default: - return -EOPNOTSUPP; - } - return 0; + const char *name; + name = adapter->name; + remove_proc_entry(name, dir); } +//#define chtoe_setup_toedev(adapter) NULL +#define update_mtu_tab(adapter) +#define write_smt_entry(adapter, idx) static int t1_ioctl(struct net_device *dev, struct ifreq *req, int cmd) { - struct adapter *adapter = dev->priv; - struct mii_ioctl_data *data = (struct mii_ioctl_data *)&req->ifr_data; + struct adapter *adapter = dev->priv; + struct mii_ioctl_data *data = (struct mii_ioctl_data *)&req->ifr_data; switch (cmd) { - case SIOCGMIIPHY: - data->phy_id = adapter->port[dev->if_port].phy->addr; - /* FALLTHRU */ - case SIOCGMIIREG: { + case SIOCGMIIPHY: + data->phy_id = adapter->port[dev->if_port].phy->addr; + /* FALLTHRU */ + case SIOCGMIIREG: { struct cphy *phy = adapter->port[dev->if_port].phy; u32 val; - if (!phy->mdio_read) return -EOPNOTSUPP; + if (!phy->mdio_read) + return -EOPNOTSUPP; phy->mdio_read(adapter, data->phy_id, 0, data->reg_num & 0x1f, &val); - data->val_out = val; - break; + data->val_out = val; + break; } - case SIOCSMIIREG: { + case SIOCSMIIREG: { struct cphy *phy = adapter->port[dev->if_port].phy; - if (!capable(CAP_NET_ADMIN)) return -EPERM; - if (!phy->mdio_write) return -EOPNOTSUPP; + if (!capable(CAP_NET_ADMIN)) + return -EPERM; + if (!phy->mdio_write) + return -EOPNOTSUPP; phy->mdio_write(adapter, data->phy_id, 0, data->reg_num & 0x1f, - data->val_in); - break; + data->val_in); + break; } - case SIOCCHETHTOOL: - return ethtool_ioctl(dev, (void *)req->ifr_data); default: return -EOPNOTSUPP; } @@ -853,9 +866,9 @@ static int t1_change_mtu(struct net_device *dev, int new_mtu) struct cmac *mac = adapter->port[dev->if_port].mac; if (!mac->ops->set_mtu) - return -EOPNOTSUPP; + return -EOPNOTSUPP; if (new_mtu < 68) - return -EINVAL; + return -EINVAL; if ((ret = mac->ops->set_mtu(mac, new_mtu))) return ret; dev->mtu = new_mtu; @@ -902,9 +915,12 @@ static void vlan_rx_kill_vid(struct net_device *dev, unsigned short vid) #ifdef CONFIG_NET_POLL_CONTROLLER static void t1_netpoll(struct net_device *dev) { + unsigned long flags; struct adapter *adapter = dev->priv; - t1_interrupt(adapter->pdev->irq, adapter, NULL); + local_irq_save(flags); + t1_select_intr_handler(adapter)(adapter->pdev->irq, adapter, NULL); + local_irq_restore(flags); } #endif @@ -938,16 +954,17 @@ static void mac_stats_task(void *data) */ static void ext_intr_task(void *data) { - u32 enable; struct adapter *adapter = data; elmer0_ext_intr_handler(adapter); /* Now reenable external interrupts */ - t1_write_reg_4(adapter, A_PL_CAUSE, F_PL_INTR_EXT); - enable = t1_read_reg_4(adapter, A_PL_ENABLE); - t1_write_reg_4(adapter, A_PL_ENABLE, enable | F_PL_INTR_EXT); + spin_lock_irq(&adapter->async_lock); adapter->slow_intr_mask |= F_PL_INTR_EXT; + writel(F_PL_INTR_EXT, adapter->regs + A_PL_CAUSE); + writel(adapter->slow_intr_mask | F_PL_INTR_SGE_DATA, + adapter->regs + A_PL_ENABLE); + spin_unlock_irq(&adapter->async_lock); } /* @@ -955,15 +972,14 @@ static void ext_intr_task(void *data) */ void t1_elmer0_ext_intr(struct adapter *adapter) { - u32 enable = t1_read_reg_4(adapter, A_PL_ENABLE); - /* * Schedule a task to handle external interrupts as we require * a process context. We disable EXT interrupts in the interim * and let the task reenable them when it's done. */ adapter->slow_intr_mask &= ~F_PL_INTR_EXT; - t1_write_reg_4(adapter, A_PL_ENABLE, enable & ~F_PL_INTR_EXT); + writel(adapter->slow_intr_mask | F_PL_INTR_SGE_DATA, + adapter->regs + A_PL_ENABLE); schedule_work(&adapter->ext_intr_handler_task); } @@ -977,7 +993,6 @@ void t1_fatal_err(struct adapter *adapter) adapter->name); } - static int __devinit init_one(struct pci_dev *pdev, const struct pci_device_id *ent) { @@ -990,14 +1005,14 @@ static int __devinit init_one(struct pci_dev *pdev, struct port_info *pi; if (!version_printed) { - printk(KERN_INFO "%s - version %s\n", driver_string, - driver_version); + printk(KERN_INFO "%s - version %s\n", DRV_DESCRIPTION, + DRV_VERSION); ++version_printed; } err = pci_enable_device(pdev); if (err) - return err; + return err; if (!(pci_resource_flags(pdev, 0) & IORESOURCE_MEM)) { CH_ERR("%s: cannot find PCI device memory base address\n", @@ -1006,20 +1021,22 @@ static int __devinit init_one(struct pci_dev *pdev, goto out_disable_pdev; } - if (!pci_set_dma_mask(pdev, PCI_DMA_64BIT)) { + if (!pci_set_dma_mask(pdev, DMA_64BIT_MASK)) { pci_using_dac = 1; - if (pci_set_consistent_dma_mask(pdev, PCI_DMA_64BIT)) { + + if (pci_set_consistent_dma_mask(pdev, DMA_64BIT_MASK)) { CH_ERR("%s: unable to obtain 64-bit DMA for" "consistent allocations\n", pci_name(pdev)); err = -ENODEV; goto out_disable_pdev; } - } else if ((err = pci_set_dma_mask(pdev, PCI_DMA_32BIT)) != 0) { + + } else if ((err = pci_set_dma_mask(pdev, DMA_32BIT_MASK)) != 0) { CH_ERR("%s: no usable DMA configuration\n", pci_name(pdev)); goto out_disable_pdev; } - err = pci_request_regions(pdev, driver_name); + err = pci_request_regions(pdev, DRV_NAME); if (err) { CH_ERR("%s: cannot obtain PCI resources\n", pci_name(pdev)); goto out_disable_pdev; @@ -1027,7 +1044,7 @@ static int __devinit init_one(struct pci_dev *pdev, pci_set_master(pdev); - mmio_start = pci_resource_start(pdev, 0); + mmio_start = pci_resource_start(pdev, 0); mmio_len = pci_resource_len(pdev, 0); bi = t1_get_board_info(ent->driver_data); @@ -1074,9 +1091,14 @@ static int __devinit init_one(struct pci_dev *pdev, ext_intr_task, adapter); INIT_WORK(&adapter->stats_update_task, mac_stats_task, adapter); +#ifdef work_struct + init_timer(&adapter->stats_update_timer); + adapter->stats_update_timer.function = mac_stats_timer; + adapter->stats_update_timer.data = + (unsigned long)adapter; +#endif pci_set_drvdata(pdev, netdev); - } pi = &adapter->port[i]; @@ -1088,11 +1110,12 @@ static int __devinit init_one(struct pci_dev *pdev, netdev->mem_end = mmio_start + mmio_len - 1; netdev->priv = adapter; netdev->features |= NETIF_F_SG | NETIF_F_IP_CSUM; + netdev->features |= NETIF_F_LLTX; + adapter->flags |= RX_CSUM_ENABLED | TCP_CSUM_CAPABLE; if (pci_using_dac) netdev->features |= NETIF_F_HIGHDMA; if (vlan_tso_capable(adapter)) { - adapter->flags |= UDP_CSUM_CAPABLE; #if defined(CONFIG_VLAN_8021Q) || defined(CONFIG_VLAN_8021Q_MODULE) adapter->flags |= VLAN_ACCEL_CAPABLE; netdev->features |= @@ -1120,7 +1143,7 @@ static int __devinit init_one(struct pci_dev *pdev, #endif netdev->weight = 64; - SET_ETHTOOL_OPS(netdev, &t1_ethtool_ops); + SET_ETHTOOL_OPS(netdev, &t1_ethtool_ops); } if (t1_init_sw_modules(adapter, bi) < 0) { @@ -1147,7 +1170,7 @@ static int __devinit init_one(struct pci_dev *pdev, if (!adapter->registered_device_map) adapter->name = adapter->port[i].dev->name; - __set_bit(i, &adapter->registered_device_map); + __set_bit(i, &adapter->registered_device_map); } } if (!adapter->registered_device_map) { @@ -1166,11 +1189,12 @@ static int __devinit init_one(struct pci_dev *pdev, t1_free_sw_modules(adapter); out_free_dev: if (adapter) { - if (adapter->regs) - iounmap(adapter->regs); + if (adapter->regs) iounmap(adapter->regs); for (i = bi->port_number - 1; i >= 0; --i) - if (adapter->port[i].dev) - free_netdev(adapter->port[i].dev); + if (adapter->port[i].dev) { + cxgb_proc_cleanup(adapter, proc_root_driver); + kfree(adapter->port[i].dev); + } } pci_release_regions(pdev); out_disable_pdev: @@ -1200,8 +1224,10 @@ static void __devexit remove_one(struct pci_dev *pdev) t1_free_sw_modules(adapter); iounmap(adapter->regs); while (--i >= 0) - if (adapter->port[i].dev) - free_netdev(adapter->port[i].dev); + if (adapter->port[i].dev) { + cxgb_proc_cleanup(adapter, proc_root_driver); + kfree(adapter->port[i].dev); + } pci_release_regions(pdev); pci_disable_device(pdev); pci_set_drvdata(pdev, NULL); @@ -1210,7 +1236,7 @@ static void __devexit remove_one(struct pci_dev *pdev) } static struct pci_driver driver = { - .name = driver_name, + .name = DRV_NAME, .id_table = t1_pci_tbl, .probe = init_one, .remove = __devexit_p(remove_one), @@ -1228,4 +1254,3 @@ static void __exit t1_cleanup_module(void) module_init(t1_init_module); module_exit(t1_cleanup_module); - diff --git a/drivers/net/chelsio/cxgb2.h b/drivers/net/chelsio/cxgb2.h deleted file mode 100644 index 6ac326afcf0..00000000000 --- a/drivers/net/chelsio/cxgb2.h +++ /dev/null @@ -1,122 +0,0 @@ -/***************************************************************************** - * * - * File: cxgb2.h * - * $Revision: 1.8 $ * - * $Date: 2005/03/23 07:41:27 $ * - * Description: * - * part of the Chelsio 10Gb Ethernet Driver. * - * * - * This program is free software; you can redistribute it and/or modify * - * it under the terms of the GNU General Public License, version 2, as * - * published by the Free Software Foundation. * - * * - * You should have received a copy of the GNU General Public License along * - * with this program; if not, write to the Free Software Foundation, Inc., * - * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. * - * * - * THIS SOFTWARE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR IMPLIED * - * WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED WARRANTIES OF * - * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. * - * * - * http://www.chelsio.com * - * * - * Copyright (c) 2003 - 2005 Chelsio Communications, Inc. * - * All rights reserved. * - * * - * Maintainers: maintainers@chelsio.com * - * * - * Authors: Dimitrios Michailidis * - * Tina Yang * - * Felix Marti * - * Scott Bardone * - * Kurt Ottaway * - * Frank DiMambro * - * * - * History: * - * * - ****************************************************************************/ - -#ifndef __CXGB_LINUX_H__ -#define __CXGB_LINUX_H__ - -#include -#include -#include -#include -#include - -/* This belongs in if_ether.h */ -#define ETH_P_CPL5 0xf - -struct cmac; -struct cphy; - -struct port_info { - struct net_device *dev; - struct cmac *mac; - struct cphy *phy; - struct link_config link_config; - struct net_device_stats netstats; -}; - -struct cxgbdev; -struct t1_sge; -struct pemc3; -struct pemc4; -struct pemc5; -struct peulp; -struct petp; -struct pecspi; -struct peespi; -struct work_struct; -struct vlan_group; - -enum { /* adapter flags */ - FULL_INIT_DONE = 0x1, - USING_MSI = 0x2, - TSO_CAPABLE = 0x4, - TCP_CSUM_CAPABLE = 0x8, - UDP_CSUM_CAPABLE = 0x10, - VLAN_ACCEL_CAPABLE = 0x20, - RX_CSUM_ENABLED = 0x40, -}; - -struct adapter { - u8 *regs; - struct pci_dev *pdev; - unsigned long registered_device_map; - unsigned long open_device_map; - unsigned int flags; - - const char *name; - int msg_enable; - u32 mmio_len; - - struct work_struct ext_intr_handler_task; - struct adapter_params params; - - struct vlan_group *vlan_grp; - - /* Terminator modules. */ - struct sge *sge; - struct pemc3 *mc3; - struct pemc4 *mc4; - struct pemc5 *mc5; - struct petp *tp; - struct pecspi *cspi; - struct peespi *espi; - struct peulp *ulp; - - struct port_info port[MAX_NPORTS]; - struct work_struct stats_update_task; - struct timer_list stats_update_timer; - - struct semaphore mib_mutex; - spinlock_t tpi_lock; - spinlock_t work_lock; - - spinlock_t async_lock ____cacheline_aligned; /* guards async operations */ - u32 slow_intr_mask; -}; - -#endif diff --git a/drivers/net/chelsio/elmer0.h b/drivers/net/chelsio/elmer0.h index 08f148643e7..5590cb2dac1 100644 --- a/drivers/net/chelsio/elmer0.h +++ b/drivers/net/chelsio/elmer0.h @@ -1,8 +1,8 @@ /***************************************************************************** * * * File: elmer0.h * - * $Revision: 1.3 $ * - * $Date: 2005/03/23 07:15:58 $ * + * $Revision: 1.6 $ * + * $Date: 2005/06/21 22:49:43 $ * * Description: * * part of the Chelsio 10Gb Ethernet Driver. * * * @@ -36,14 +36,8 @@ * * ****************************************************************************/ -#ifndef CHELSIO_ELMER0_H -#define CHELSIO_ELMER0_H - -/* ELMER0 flavors */ -enum { - ELMER0_XC2S300E_6FT256_C, - ELMER0_XC2S100E_6TQ144_C -}; +#ifndef _CXGB_ELMER0_H_ +#define _CXGB_ELMER0_H_ /* ELMER0 registers */ #define A_ELMER0_VERSION 0x100000 @@ -154,4 +148,4 @@ enum { #define MI1_OP_INDIRECT_READ_INC 2 #define MI1_OP_INDIRECT_READ 3 -#endif +#endif /* _CXGB_ELMER0_H_ */ diff --git a/drivers/net/chelsio/espi.c b/drivers/net/chelsio/espi.c index 7ec2dc7bafa..230642571c9 100644 --- a/drivers/net/chelsio/espi.c +++ b/drivers/net/chelsio/espi.c @@ -1,8 +1,8 @@ /***************************************************************************** * * * File: espi.c * - * $Revision: 1.9 $ * - * $Date: 2005/03/23 07:41:27 $ * + * $Revision: 1.14 $ * + * $Date: 2005/05/14 00:59:32 $ * * Description: * * Ethernet SPI functionality. * * part of the Chelsio 10Gb Ethernet Driver. * @@ -63,15 +63,16 @@ static int tricn_write(adapter_t *adapter, int bundle_addr, int module_addr, { int busy, attempts = TRICN_CMD_ATTEMPTS; - t1_write_reg_4(adapter, A_ESPI_CMD_ADDR, V_WRITE_DATA(wr_data) | - V_REGISTER_OFFSET(reg_offset) | - V_CHANNEL_ADDR(ch_addr) | V_MODULE_ADDR(module_addr) | - V_BUNDLE_ADDR(bundle_addr) | - V_SPI4_COMMAND(TRICN_CMD_WRITE)); - t1_write_reg_4(adapter, A_ESPI_GOSTAT, 0); + writel(V_WRITE_DATA(wr_data) | + V_REGISTER_OFFSET(reg_offset) | + V_CHANNEL_ADDR(ch_addr) | V_MODULE_ADDR(module_addr) | + V_BUNDLE_ADDR(bundle_addr) | + V_SPI4_COMMAND(TRICN_CMD_WRITE), + adapter->regs + A_ESPI_CMD_ADDR); + writel(0, adapter->regs + A_ESPI_GOSTAT); do { - busy = t1_read_reg_4(adapter, A_ESPI_GOSTAT) & F_ESPI_CMD_BUSY; + busy = readl(adapter->regs + A_ESPI_GOSTAT) & F_ESPI_CMD_BUSY; } while (busy && --attempts); if (busy) @@ -99,12 +100,12 @@ static int tricn_init(adapter_t *adapter) /* 1 */ timeout=1000; do { - stat = t1_read_reg_4(adapter, A_ESPI_RX_RESET); + stat = readl(adapter->regs + A_ESPI_RX_RESET); is_ready = (stat & 0x4); timeout--; udelay(5); } while (!is_ready || (timeout==0)); - t1_write_reg_4(adapter, A_ESPI_RX_RESET, 0x2); + writel(0x2, adapter->regs + A_ESPI_RX_RESET); if (timeout==0) { CH_ERR("ESPI : ERROR : Timeout tricn_init() \n"); @@ -127,14 +128,14 @@ static int tricn_init(adapter_t *adapter) for (i=8; i<= 8; i++) tricn_write(adapter, 0, 2, i, TRICN_CNFG, 0xf1); /* 3 */ - t1_write_reg_4(adapter, A_ESPI_RX_RESET, 0x3); + writel(0x3, adapter->regs + A_ESPI_RX_RESET); return 0; } void t1_espi_intr_enable(struct peespi *espi) { - u32 enable, pl_intr = t1_read_reg_4(espi->adapter, A_PL_ENABLE); + u32 enable, pl_intr = readl(espi->adapter->regs + A_PL_ENABLE); /* * Cannot enable ESPI interrupts on T1B because HW asserts the @@ -144,28 +145,28 @@ void t1_espi_intr_enable(struct peespi *espi) * cannot be cleared (HW bug). */ enable = t1_is_T1B(espi->adapter) ? 0 : ESPI_INTR_MASK; - t1_write_reg_4(espi->adapter, A_ESPI_INTR_ENABLE, enable); - t1_write_reg_4(espi->adapter, A_PL_ENABLE, pl_intr | F_PL_INTR_ESPI); + writel(enable, espi->adapter->regs + A_ESPI_INTR_ENABLE); + writel(pl_intr | F_PL_INTR_ESPI, espi->adapter->regs + A_PL_ENABLE); } void t1_espi_intr_clear(struct peespi *espi) { - t1_write_reg_4(espi->adapter, A_ESPI_INTR_STATUS, 0xffffffff); - t1_write_reg_4(espi->adapter, A_PL_CAUSE, F_PL_INTR_ESPI); + writel(0xffffffff, espi->adapter->regs + A_ESPI_INTR_STATUS); + writel(F_PL_INTR_ESPI, espi->adapter->regs + A_PL_CAUSE); } void t1_espi_intr_disable(struct peespi *espi) { - u32 pl_intr = t1_read_reg_4(espi->adapter, A_PL_ENABLE); + u32 pl_intr = readl(espi->adapter->regs + A_PL_ENABLE); - t1_write_reg_4(espi->adapter, A_ESPI_INTR_ENABLE, 0); - t1_write_reg_4(espi->adapter, A_PL_ENABLE, pl_intr & ~F_PL_INTR_ESPI); + writel(0, espi->adapter->regs + A_ESPI_INTR_ENABLE); + writel(pl_intr & ~F_PL_INTR_ESPI, espi->adapter->regs + A_PL_ENABLE); } int t1_espi_intr_handler(struct peespi *espi) { u32 cnt; - u32 status = t1_read_reg_4(espi->adapter, A_ESPI_INTR_STATUS); + u32 status = readl(espi->adapter->regs + A_ESPI_INTR_STATUS); if (status & F_DIP4ERR) espi->intr_cnt.DIP4_err++; @@ -184,7 +185,7 @@ int t1_espi_intr_handler(struct peespi *espi) * Must read the error count to clear the interrupt * that it causes. */ - cnt = t1_read_reg_4(espi->adapter, A_ESPI_DIP2_ERR_COUNT); + cnt = readl(espi->adapter->regs + A_ESPI_DIP2_ERR_COUNT); } /* @@ -193,68 +194,28 @@ int t1_espi_intr_handler(struct peespi *espi) */ if (status && t1_is_T1B(espi->adapter)) status = 1; - t1_write_reg_4(espi->adapter, A_ESPI_INTR_STATUS, status); + writel(status, espi->adapter->regs + A_ESPI_INTR_STATUS); return 0; } -static void espi_setup_for_pm3393(adapter_t *adapter) +const struct espi_intr_counts *t1_espi_get_intr_counts(struct peespi *espi) { - u32 wmark = t1_is_T1B(adapter) ? 0x4000 : 0x3200; - - t1_write_reg_4(adapter, A_ESPI_SCH_TOKEN0, 0x1f4); - t1_write_reg_4(adapter, A_ESPI_SCH_TOKEN1, 0x1f4); - t1_write_reg_4(adapter, A_ESPI_SCH_TOKEN2, 0x1f4); - t1_write_reg_4(adapter, A_ESPI_SCH_TOKEN3, 0x1f4); - t1_write_reg_4(adapter, A_ESPI_RX_FIFO_ALMOST_EMPTY_WATERMARK, 0x100); - t1_write_reg_4(adapter, A_ESPI_RX_FIFO_ALMOST_FULL_WATERMARK, wmark); - t1_write_reg_4(adapter, A_ESPI_CALENDAR_LENGTH, 3); - t1_write_reg_4(adapter, A_ESPI_TRAIN, 0x08000008); - t1_write_reg_4(adapter, A_PORT_CONFIG, - V_RX_NPORTS(1) | V_TX_NPORTS(1)); + return &espi->intr_cnt; } -static void espi_setup_for_vsc7321(adapter_t *adapter) +static void espi_setup_for_pm3393(adapter_t *adapter) { u32 wmark = t1_is_T1B(adapter) ? 0x4000 : 0x3200; - t1_write_reg_4(adapter, A_ESPI_SCH_TOKEN0, 0x1f4); - t1_write_reg_4(adapter, A_ESPI_SCH_TOKEN1, 0x1f4); - t1_write_reg_4(adapter, A_ESPI_SCH_TOKEN2, 0x1f4); - t1_write_reg_4(adapter, A_ESPI_SCH_TOKEN3, 0x1f4); - t1_write_reg_4(adapter, A_ESPI_RX_FIFO_ALMOST_EMPTY_WATERMARK, 0x100); - t1_write_reg_4(adapter, A_ESPI_RX_FIFO_ALMOST_FULL_WATERMARK, wmark); - t1_write_reg_4(adapter, A_ESPI_CALENDAR_LENGTH, 3); - t1_write_reg_4(adapter, A_ESPI_TRAIN, 0x08000008); - t1_write_reg_4(adapter, A_PORT_CONFIG, - V_RX_NPORTS(1) | V_TX_NPORTS(1)); -} - -/* - * Note that T1B requires at least 2 ports for IXF1010 due to a HW bug. - */ -static void espi_setup_for_ixf1010(adapter_t *adapter, int nports) -{ - t1_write_reg_4(adapter, A_ESPI_CALENDAR_LENGTH, 1); - if (nports == 4) { - if (is_T2(adapter)) { - t1_write_reg_4(adapter, A_ESPI_RX_FIFO_ALMOST_FULL_WATERMARK, - 0xf00); - t1_write_reg_4(adapter, A_ESPI_RX_FIFO_ALMOST_EMPTY_WATERMARK, - 0x3c0); - } else { - t1_write_reg_4(adapter, A_ESPI_RX_FIFO_ALMOST_FULL_WATERMARK, - 0x7ff); - t1_write_reg_4(adapter, A_ESPI_RX_FIFO_ALMOST_EMPTY_WATERMARK, - 0x1ff); - } - } else { - t1_write_reg_4(adapter, A_ESPI_RX_FIFO_ALMOST_FULL_WATERMARK, - 0x1fff); - t1_write_reg_4(adapter, A_ESPI_RX_FIFO_ALMOST_EMPTY_WATERMARK, - 0x7ff); - } - t1_write_reg_4(adapter, A_PORT_CONFIG, - V_RX_NPORTS(nports) | V_TX_NPORTS(nports)); + writel(0x1f4, adapter->regs + A_ESPI_SCH_TOKEN0); + writel(0x1f4, adapter->regs + A_ESPI_SCH_TOKEN1); + writel(0x1f4, adapter->regs + A_ESPI_SCH_TOKEN2); + writel(0x1f4, adapter->regs + A_ESPI_SCH_TOKEN3); + writel(0x100, adapter->regs + A_ESPI_RX_FIFO_ALMOST_EMPTY_WATERMARK); + writel(wmark, adapter->regs + A_ESPI_RX_FIFO_ALMOST_FULL_WATERMARK); + writel(3, adapter->regs + A_ESPI_CALENDAR_LENGTH); + writel(0x08000008, adapter->regs + A_ESPI_TRAIN); + writel(V_RX_NPORTS(1) | V_TX_NPORTS(1), adapter->regs + A_PORT_CONFIG); } /* T2 Init part -- */ @@ -263,43 +224,42 @@ static void espi_setup_for_ixf1010(adapter_t *adapter, int nports) /* 3. Init TriCN Hard Macro */ int t1_espi_init(struct peespi *espi, int mac_type, int nports) { + u32 cnt; + u32 status_enable_extra = 0; adapter_t *adapter = espi->adapter; - u32 cnt; u32 status, burstval = 0x800100; /* Disable ESPI training. MACs that can handle it enable it below. */ - t1_write_reg_4(adapter, A_ESPI_TRAIN, 0); + writel(0, adapter->regs + A_ESPI_TRAIN); if (is_T2(adapter)) { - t1_write_reg_4(adapter, A_ESPI_MISC_CONTROL, - V_OUT_OF_SYNC_COUNT(4) | - V_DIP2_PARITY_ERR_THRES(3) | V_DIP4_THRES(1)); + writel(V_OUT_OF_SYNC_COUNT(4) | + V_DIP2_PARITY_ERR_THRES(3) | + V_DIP4_THRES(1), adapter->regs + A_ESPI_MISC_CONTROL); if (nports == 4) { /* T204: maxburst1 = 0x40, maxburst2 = 0x20 */ burstval = 0x200040; } } - t1_write_reg_4(adapter, A_ESPI_MAXBURST1_MAXBURST2, burstval); + writel(burstval, adapter->regs + A_ESPI_MAXBURST1_MAXBURST2); - if (mac_type == CHBT_MAC_PM3393) + switch (mac_type) { + case CHBT_MAC_PM3393: espi_setup_for_pm3393(adapter); - else if (mac_type == CHBT_MAC_VSC7321) - espi_setup_for_vsc7321(adapter); - else if (mac_type == CHBT_MAC_IXF1010) { - status_enable_extra = F_INTEL1010MODE; - espi_setup_for_ixf1010(adapter, nports); - } else + break; + default: return -1; + } /* * Make sure any pending interrupts from the SPI are * Cleared before enabling the interrupt. */ - t1_write_reg_4(espi->adapter, A_ESPI_INTR_ENABLE, ESPI_INTR_MASK); - status = t1_read_reg_4(espi->adapter, A_ESPI_INTR_STATUS); + writel(ESPI_INTR_MASK, espi->adapter->regs + A_ESPI_INTR_ENABLE); + status = readl(espi->adapter->regs + A_ESPI_INTR_STATUS); if (status & F_DIP2PARITYERR) { - cnt = t1_read_reg_4(espi->adapter, A_ESPI_DIP2_ERR_COUNT); + cnt = readl(espi->adapter->regs + A_ESPI_DIP2_ERR_COUNT); } /* @@ -308,10 +268,10 @@ int t1_espi_init(struct peespi *espi, int mac_type, int nports) */ if (status && t1_is_T1B(espi->adapter)) status = 1; - t1_write_reg_4(espi->adapter, A_ESPI_INTR_STATUS, status); + writel(status, espi->adapter->regs + A_ESPI_INTR_STATUS); - t1_write_reg_4(adapter, A_ESPI_FIFO_STATUS_ENABLE, - status_enable_extra | F_RXSTATUSENABLE); + writel(status_enable_extra | F_RXSTATUSENABLE, + adapter->regs + A_ESPI_FIFO_STATUS_ENABLE); if (is_T2(adapter)) { tricn_init(adapter); @@ -319,10 +279,10 @@ int t1_espi_init(struct peespi *espi, int mac_type, int nports) * Always position the control at the 1st port egress IN * (sop,eop) counter to reduce PIOs for T/N210 workaround. */ - espi->misc_ctrl = (t1_read_reg_4(adapter, A_ESPI_MISC_CONTROL) + espi->misc_ctrl = (readl(adapter->regs + A_ESPI_MISC_CONTROL) & ~MON_MASK) | (F_MONITORED_DIRECTION | F_MONITORED_INTERFACE); - t1_write_reg_4(adapter, A_ESPI_MISC_CONTROL, espi->misc_ctrl); + writel(espi->misc_ctrl, adapter->regs + A_ESPI_MISC_CONTROL); spin_lock_init(&espi->lock); } @@ -354,15 +314,16 @@ void t1_espi_set_misc_ctrl(adapter_t *adapter, u32 val) spin_lock(&espi->lock); espi->misc_ctrl = (val & ~MON_MASK) | (espi->misc_ctrl & MON_MASK); - t1_write_reg_4(adapter, A_ESPI_MISC_CONTROL, espi->misc_ctrl); + writel(espi->misc_ctrl, adapter->regs + A_ESPI_MISC_CONTROL); spin_unlock(&espi->lock); } u32 t1_espi_get_mon(adapter_t *adapter, u32 addr, u8 wait) { - struct peespi *espi = adapter->espi; u32 sel; + struct peespi *espi = adapter->espi; + if (!is_T2(adapter)) return 0; sel = V_MONITORED_PORT_NUM((addr & 0x3c) >> 2); @@ -373,14 +334,13 @@ u32 t1_espi_get_mon(adapter_t *adapter, u32 addr, u8 wait) else spin_lock(&espi->lock); if ((sel != (espi->misc_ctrl & MON_MASK))) { - t1_write_reg_4(adapter, A_ESPI_MISC_CONTROL, - ((espi->misc_ctrl & ~MON_MASK) | sel)); - sel = t1_read_reg_4(adapter, A_ESPI_SCH_TOKEN3); - t1_write_reg_4(adapter, A_ESPI_MISC_CONTROL, - espi->misc_ctrl); + writel(((espi->misc_ctrl & ~MON_MASK) | sel), + adapter->regs + A_ESPI_MISC_CONTROL); + sel = readl(adapter->regs + A_ESPI_SCH_TOKEN3); + writel(espi->misc_ctrl, adapter->regs + A_ESPI_MISC_CONTROL); } else - sel = t1_read_reg_4(adapter, A_ESPI_SCH_TOKEN3); + sel = readl(adapter->regs + A_ESPI_SCH_TOKEN3); spin_unlock(&espi->lock); return sel; } diff --git a/drivers/net/chelsio/espi.h b/drivers/net/chelsio/espi.h index 0f84e8b6399..c90e37f8457 100644 --- a/drivers/net/chelsio/espi.h +++ b/drivers/net/chelsio/espi.h @@ -1,8 +1,8 @@ /***************************************************************************** * * * File: espi.h * - * $Revision: 1.4 $ * - * $Date: 2005/03/23 07:15:58 $ * + * $Revision: 1.7 $ * + * $Date: 2005/06/21 18:29:47 $ * * Description: * * part of the Chelsio 10Gb Ethernet Driver. * * * @@ -36,8 +36,8 @@ * * ****************************************************************************/ -#ifndef CHELSIO_ESPI_H -#define CHELSIO_ESPI_H +#ifndef _CXGB_ESPI_H_ +#define _CXGB_ESPI_H_ #include "common.h" @@ -60,8 +60,9 @@ void t1_espi_intr_enable(struct peespi *); void t1_espi_intr_clear(struct peespi *); void t1_espi_intr_disable(struct peespi *); int t1_espi_intr_handler(struct peespi *); +const struct espi_intr_counts *t1_espi_get_intr_counts(struct peespi *espi); void t1_espi_set_misc_ctrl(adapter_t *adapter, u32 val); u32 t1_espi_get_mon(adapter_t *adapter, u32 addr, u8 wait); -#endif +#endif /* _CXGB_ESPI_H_ */ diff --git a/drivers/net/chelsio/gmac.h b/drivers/net/chelsio/gmac.h index 24501e2232c..746b0eeea96 100644 --- a/drivers/net/chelsio/gmac.h +++ b/drivers/net/chelsio/gmac.h @@ -1,8 +1,8 @@ /***************************************************************************** * * * File: gmac.h * - * $Revision: 1.3 $ * - * $Date: 2005/03/23 07:15:58 $ * + * $Revision: 1.6 $ * + * $Date: 2005/06/21 18:29:47 $ * * Description: * * Generic MAC functionality. * * part of the Chelsio 10Gb Ethernet Driver. * @@ -37,8 +37,8 @@ * * ****************************************************************************/ -#ifndef CHELSIO_GMAC_H -#define CHELSIO_GMAC_H +#ifndef _CXGB_GMAC_H_ +#define _CXGB_GMAC_H_ #include "common.h" @@ -130,4 +130,5 @@ extern struct gmac t1_chelsio_mac_ops; extern struct gmac t1_vsc7321_ops; extern struct gmac t1_ixf1010_ops; extern struct gmac t1_dummy_mac_ops; -#endif + +#endif /* _CXGB_GMAC_H_ */ diff --git a/drivers/net/chelsio/mv88x201x.c b/drivers/net/chelsio/mv88x201x.c index f54133af1bc..db503428278 100644 --- a/drivers/net/chelsio/mv88x201x.c +++ b/drivers/net/chelsio/mv88x201x.c @@ -1,8 +1,8 @@ /***************************************************************************** * * * File: mv88x201x.c * - * $Revision: 1.7 $ * - * $Date: 2005/03/23 07:15:59 $ * + * $Revision: 1.12 $ * + * $Date: 2005/04/15 19:27:14 $ * * Description: * * Marvell PHY (mv88x201x) functionality. * * part of the Chelsio 10Gb Ethernet Driver. * @@ -85,33 +85,29 @@ static int mv88x201x_reset(struct cphy *cphy, int wait) static int mv88x201x_interrupt_enable(struct cphy *cphy) { + u32 elmer; + /* Enable PHY LASI interrupts. */ mdio_write(cphy, 0x1, 0x9002, 0x1); /* Enable Marvell interrupts through Elmer0. */ - if (t1_is_asic(cphy->adapter)) { - u32 elmer; - - t1_tpi_read(cphy->adapter, A_ELMER0_INT_ENABLE, &elmer); - elmer |= ELMER0_GP_BIT6; - t1_tpi_write(cphy->adapter, A_ELMER0_INT_ENABLE, elmer); - } + t1_tpi_read(cphy->adapter, A_ELMER0_INT_ENABLE, &elmer); + elmer |= ELMER0_GP_BIT6; + t1_tpi_write(cphy->adapter, A_ELMER0_INT_ENABLE, elmer); return 0; } static int mv88x201x_interrupt_disable(struct cphy *cphy) { + u32 elmer; + /* Disable PHY LASI interrupts. */ mdio_write(cphy, 0x1, 0x9002, 0x0); /* Disable Marvell interrupts through Elmer0. */ - if (t1_is_asic(cphy->adapter)) { - u32 elmer; - - t1_tpi_read(cphy->adapter, A_ELMER0_INT_ENABLE, &elmer); - elmer &= ~ELMER0_GP_BIT6; - t1_tpi_write(cphy->adapter, A_ELMER0_INT_ENABLE, elmer); - } + t1_tpi_read(cphy->adapter, A_ELMER0_INT_ENABLE, &elmer); + elmer &= ~ELMER0_GP_BIT6; + t1_tpi_write(cphy->adapter, A_ELMER0_INT_ENABLE, elmer); return 0; } @@ -144,11 +140,9 @@ static int mv88x201x_interrupt_clear(struct cphy *cphy) #endif /* Clear Marvell interrupts through Elmer0. */ - if (t1_is_asic(cphy->adapter)) { - t1_tpi_read(cphy->adapter, A_ELMER0_INT_CAUSE, &elmer); - elmer |= ELMER0_GP_BIT6; - t1_tpi_write(cphy->adapter, A_ELMER0_INT_CAUSE, elmer); - } + t1_tpi_read(cphy->adapter, A_ELMER0_INT_CAUSE, &elmer); + elmer |= ELMER0_GP_BIT6; + t1_tpi_write(cphy->adapter, A_ELMER0_INT_CAUSE, elmer); return 0; } diff --git a/drivers/net/chelsio/osdep.h b/drivers/net/chelsio/osdep.h deleted file mode 100644 index 095cb474434..00000000000 --- a/drivers/net/chelsio/osdep.h +++ /dev/null @@ -1,169 +0,0 @@ -/***************************************************************************** - * * - * File: osdep.h * - * $Revision: 1.9 $ * - * $Date: 2005/03/23 07:41:27 $ * - * Description: * - * part of the Chelsio 10Gb Ethernet Driver. * - * * - * This program is free software; you can redistribute it and/or modify * - * it under the terms of the GNU General Public License, version 2, as * - * published by the Free Software Foundation. * - * * - * You should have received a copy of the GNU General Public License along * - * with this program; if not, write to the Free Software Foundation, Inc., * - * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. * - * * - * THIS SOFTWARE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR IMPLIED * - * WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED WARRANTIES OF * - * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. * - * * - * http://www.chelsio.com * - * * - * Copyright (c) 2003 - 2005 Chelsio Communications, Inc. * - * All rights reserved. * - * * - * Maintainers: maintainers@chelsio.com * - * * - * Authors: Dimitrios Michailidis * - * Tina Yang * - * Felix Marti * - * Scott Bardone * - * Kurt Ottaway * - * Frank DiMambro * - * * - * History: * - * * - ****************************************************************************/ - -#ifndef __CHELSIO_OSDEP_H -#define __CHELSIO_OSDEP_H - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#include "cxgb2.h" - -#define DRV_NAME "cxgb" -#define PFX DRV_NAME ": " - -#define CH_ERR(fmt, ...) printk(KERN_ERR PFX fmt, ## __VA_ARGS__) -#define CH_WARN(fmt, ...) printk(KERN_WARNING PFX fmt, ## __VA_ARGS__) -#define CH_ALERT(fmt, ...) printk(KERN_ALERT PFX fmt, ## __VA_ARGS__) - -/* - * More powerful macro that selectively prints messages based on msg_enable. - * For info and debugging messages. - */ -#define CH_MSG(adapter, level, category, fmt, ...) do { \ - if ((adapter)->msg_enable & NETIF_MSG_##category) \ - printk(KERN_##level PFX "%s: " fmt, (adapter)->name, \ - ## __VA_ARGS__); \ -} while (0) - -#ifdef DEBUG -# define CH_DBG(adapter, category, fmt, ...) \ - CH_MSG(adapter, DEBUG, category, fmt, ## __VA_ARGS__) -#else -# define CH_DBG(fmt, ...) -#endif - -/* Additional NETIF_MSG_* categories */ -#define NETIF_MSG_MMIO 0x8000000 - -#define CH_DEVICE(devid, ssid, idx) \ - { PCI_VENDOR_ID_CHELSIO, devid, PCI_ANY_ID, ssid, 0, 0, idx } - -#define SUPPORTED_PAUSE (1 << 13) -#define SUPPORTED_LOOPBACK (1 << 15) - -#define ADVERTISED_PAUSE (1 << 13) -#define ADVERTISED_ASYM_PAUSE (1 << 14) - -/* - * Now that we have included the driver's main data structure, - * we typedef it to something the rest of the system understands. - */ -typedef struct adapter adapter_t; - -#define TPI_LOCK(adapter) spin_lock(&(adapter)->tpi_lock) -#define TPI_UNLOCK(adapter) spin_unlock(&(adapter)->tpi_lock) - -void t1_elmer0_ext_intr(adapter_t *adapter); -void t1_link_changed(adapter_t *adapter, int port_id, int link_status, - int speed, int duplex, int fc); - -static inline u16 t1_read_reg_2(adapter_t *adapter, u32 reg_addr) -{ - u16 val = readw(adapter->regs + reg_addr); - - CH_DBG(adapter, MMIO, "read register 0x%x value 0x%x\n", reg_addr, - val); - return val; -} - -static inline void t1_write_reg_2(adapter_t *adapter, u32 reg_addr, u16 val) -{ - CH_DBG(adapter, MMIO, "setting register 0x%x to 0x%x\n", reg_addr, - val); - writew(val, adapter->regs + reg_addr); -} - -static inline u32 t1_read_reg_4(adapter_t *adapter, u32 reg_addr) -{ - u32 val = readl(adapter->regs + reg_addr); - - CH_DBG(adapter, MMIO, "read register 0x%x value 0x%x\n", reg_addr, - val); - return val; -} - -static inline void t1_write_reg_4(adapter_t *adapter, u32 reg_addr, u32 val) -{ - CH_DBG(adapter, MMIO, "setting register 0x%x to 0x%x\n", reg_addr, - val); - writel(val, adapter->regs + reg_addr); -} - -static inline const char *port_name(adapter_t *adapter, int port_idx) -{ - return adapter->port[port_idx].dev->name; -} - -static inline void t1_set_hw_addr(adapter_t *adapter, int port_idx, - u8 hw_addr[]) -{ - memcpy(adapter->port[port_idx].dev->dev_addr, hw_addr, ETH_ALEN); -} - -struct t1_rx_mode { - struct net_device *dev; - u32 idx; - struct dev_mc_list *list; -}; - -#define t1_rx_mode_promisc(rm) (rm->dev->flags & IFF_PROMISC) -#define t1_rx_mode_allmulti(rm) (rm->dev->flags & IFF_ALLMULTI) -#define t1_rx_mode_mc_cnt(rm) (rm->dev->mc_count) - -static inline u8 *t1_get_next_mcaddr(struct t1_rx_mode *rm) -{ - u8 *addr = 0; - - if (rm->idx++ < rm->dev->mc_count) { - addr = rm->list->dmi_addr; - rm->list = rm->list->next; - } - return addr; -} - -#endif diff --git a/drivers/net/chelsio/pm3393.c b/drivers/net/chelsio/pm3393.c index 17bd20f60d9..04a1404fc65 100644 --- a/drivers/net/chelsio/pm3393.c +++ b/drivers/net/chelsio/pm3393.c @@ -1,8 +1,8 @@ /***************************************************************************** * * * File: pm3393.c * - * $Revision: 1.9 $ * - * $Date: 2005/03/23 07:41:27 $ * + * $Revision: 1.16 $ * + * $Date: 2005/05/14 00:59:32 $ * * Description: * * PMC/SIERRA (pm3393) MAC-PHY functionality. * * part of the Chelsio 10Gb Ethernet Driver. * @@ -45,15 +45,19 @@ /* 802.3ae 10Gb/s MDIO Manageable Device(MMD) */ -#define MMD_RESERVED 0 -#define MMD_PMAPMD 1 -#define MMD_WIS 2 -#define MMD_PCS 3 -#define MMD_PHY_XGXS 4 /* XGMII Extender Sublayer */ -#define MMD_DTE_XGXS 5 +enum { + MMD_RESERVED, + MMD_PMAPMD, + MMD_WIS, + MMD_PCS, + MMD_PHY_XGXS, /* XGMII Extender Sublayer */ + MMD_DTE_XGXS, +}; -#define PHY_XGXS_CTRL_1 0 -#define PHY_XGXS_STATUS_1 1 +enum { + PHY_XGXS_CTRL_1, + PHY_XGXS_STATUS_1 +}; #define OFFSET(REG_ADDR) (REG_ADDR << 2) @@ -160,9 +164,9 @@ static int pm3393_interrupt_enable(struct cmac *cmac) 0 /*SUNI1x10GEXP_BITMSK_TOP_INTE */ ); /* TERMINATOR - PL_INTERUPTS_EXT */ - pl_intr = t1_read_reg_4(cmac->adapter, A_PL_ENABLE); + pl_intr = readl(cmac->adapter->regs + A_PL_ENABLE); pl_intr |= F_PL_INTR_EXT; - t1_write_reg_4(cmac->adapter, A_PL_ENABLE, pl_intr); + writel(pl_intr, cmac->adapter->regs + A_PL_ENABLE); return 0; } @@ -242,9 +246,9 @@ static int pm3393_interrupt_clear(struct cmac *cmac) /* TERMINATOR - PL_INTERUPTS_EXT */ - pl_intr = t1_read_reg_4(cmac->adapter, A_PL_CAUSE); + pl_intr = readl(cmac->adapter->regs + A_PL_CAUSE); pl_intr |= F_PL_INTR_EXT; - t1_write_reg_4(cmac->adapter, A_PL_CAUSE, pl_intr); + writel(pl_intr, cmac->adapter->regs + A_PL_CAUSE); return 0; } @@ -261,8 +265,6 @@ static int pm3393_interrupt_handler(struct cmac *cmac) /* Read the master interrupt status register. */ pmread(cmac, SUNI1x10GEXP_REG_MASTER_INTERRUPT_STATUS, &master_intr_status); - CH_DBG(cmac->adapter, INTR, "PM3393 intr cause 0x%x\n", - master_intr_status); /* TBD XXX Lets just clear everything for now */ pm3393_interrupt_clear(cmac); @@ -703,10 +705,9 @@ static struct cmac *pm3393_mac_create(adapter_t *adapter, int index) t1_tpi_write(adapter, OFFSET(0x3040), 0x0c32); /* # TXXG Config */ /* For T1 use timer based Mac flow control. */ - if (t1_is_T1B(adapter)) - t1_tpi_write(adapter, OFFSET(0x304d), 0x8000); + t1_tpi_write(adapter, OFFSET(0x304d), 0x8000); t1_tpi_write(adapter, OFFSET(0x2040), 0x059c); /* # RXXG Config */ - t1_tpi_write(adapter, OFFSET(0x2049), 0x0000); /* # RXXG Cut Through */ + t1_tpi_write(adapter, OFFSET(0x2049), 0x0001); /* # RXXG Cut Through */ t1_tpi_write(adapter, OFFSET(0x2070), 0x0000); /* # Disable promiscuous mode */ /* Setup Exact Match Filter 0 to allow broadcast packets. @@ -814,12 +815,6 @@ static int pm3393_mac_reset(adapter_t * adapter) successful_reset = (is_pl4_reset_finished && !is_pl4_outof_lock && is_xaui_mabc_pll_locked); - - CH_DBG(adapter, HW, - "PM3393 HW reset %d: pl4_reset 0x%x, val 0x%x, " - "is_pl4_outof_lock 0x%x, xaui_locked 0x%x\n", - i, is_pl4_reset_finished, val, is_pl4_outof_lock, - is_xaui_mabc_pll_locked); } return successful_reset ? 0 : 1; } diff --git a/drivers/net/chelsio/regs.h b/drivers/net/chelsio/regs.h index 5a70803eb1b..b90e11f40d1 100644 --- a/drivers/net/chelsio/regs.h +++ b/drivers/net/chelsio/regs.h @@ -1,8 +1,8 @@ /***************************************************************************** * * * File: regs.h * - * $Revision: 1.4 $ * - * $Date: 2005/03/23 07:15:59 $ * + * $Revision: 1.8 $ * + * $Date: 2005/06/21 18:29:48 $ * * Description: * * part of the Chelsio 10Gb Ethernet Driver. * * * @@ -36,7 +36,8 @@ * * ****************************************************************************/ -/* Do not edit this file */ +#ifndef _CXGB_REGS_H_ +#define _CXGB_REGS_H_ /* SGE registers */ #define A_SG_CONTROL 0x0 @@ -74,6 +75,14 @@ #define V_DISABLE_CMDQ1_GTS(x) ((x) << S_DISABLE_CMDQ1_GTS) #define F_DISABLE_CMDQ1_GTS V_DISABLE_CMDQ1_GTS(1U) +#define S_DISABLE_FL0_GTS 10 +#define V_DISABLE_FL0_GTS(x) ((x) << S_DISABLE_FL0_GTS) +#define F_DISABLE_FL0_GTS V_DISABLE_FL0_GTS(1U) + +#define S_DISABLE_FL1_GTS 11 +#define V_DISABLE_FL1_GTS(x) ((x) << S_DISABLE_FL1_GTS) +#define F_DISABLE_FL1_GTS V_DISABLE_FL1_GTS(1U) + #define S_ENABLE_BIG_ENDIAN 12 #define V_ENABLE_BIG_ENDIAN(x) ((x) << S_ENABLE_BIG_ENDIAN) #define F_ENABLE_BIG_ENDIAN V_ENABLE_BIG_ENDIAN(1U) @@ -132,6 +141,7 @@ #define F_PACKET_MISMATCH V_PACKET_MISMATCH(1U) #define A_SG_INT_CAUSE 0xbc +#define A_SG_RESPACCUTIMER 0xc0 /* MC3 registers */ @@ -247,6 +257,10 @@ #define V_SYN_COOKIE_PARAMETER(x) ((x) << S_SYN_COOKIE_PARAMETER) #define A_TP_PC_CONFIG 0x348 +#define S_DIS_TX_FILL_WIN_PUSH 12 +#define V_DIS_TX_FILL_WIN_PUSH(x) ((x) << S_DIS_TX_FILL_WIN_PUSH) +#define F_DIS_TX_FILL_WIN_PUSH V_DIS_TX_FILL_WIN_PUSH(1U) + #define S_TP_PC_REV 30 #define M_TP_PC_REV 0x3 #define G_TP_PC_REV(x) (((x) >> S_TP_PC_REV) & M_TP_PC_REV) @@ -451,3 +465,4 @@ #define M_PCI_MODE_CLK 0x3 #define G_PCI_MODE_CLK(x) (((x) >> S_PCI_MODE_CLK) & M_PCI_MODE_CLK) +#endif /* _CXGB_REGS_H_ */ diff --git a/drivers/net/chelsio/sge.c b/drivers/net/chelsio/sge.c index bcf8b1e939b..53b41d99b00 100644 --- a/drivers/net/chelsio/sge.c +++ b/drivers/net/chelsio/sge.c @@ -1,8 +1,8 @@ /***************************************************************************** * * * File: sge.c * - * $Revision: 1.13 $ * - * $Date: 2005/03/23 07:41:27 $ * + * $Revision: 1.26 $ * + * $Date: 2005/06/21 18:29:48 $ * * Description: * * DMA engine. * * part of the Chelsio 10Gb Ethernet Driver. * @@ -58,59 +58,62 @@ #include "regs.h" #include "espi.h" + +#ifdef NETIF_F_TSO #include +#endif #define SGE_CMDQ_N 2 #define SGE_FREELQ_N 2 -#define SGE_CMDQ0_E_N 512 +#define SGE_CMDQ0_E_N 1024 #define SGE_CMDQ1_E_N 128 #define SGE_FREEL_SIZE 4096 #define SGE_JUMBO_FREEL_SIZE 512 #define SGE_FREEL_REFILL_THRESH 16 #define SGE_RESPQ_E_N 1024 -#define SGE_INTR_BUCKETSIZE 100 -#define SGE_INTR_LATBUCKETS 5 -#define SGE_INTR_MAXBUCKETS 11 -#define SGE_INTRTIMER0 1 -#define SGE_INTRTIMER1 50 -#define SGE_INTRTIMER_NRES 10000 -#define SGE_RX_COPY_THRESHOLD 256 +#define SGE_INTRTIMER_NRES 1000 +#define SGE_RX_COPY_THRES 256 #define SGE_RX_SM_BUF_SIZE 1536 -#define SGE_RESPQ_REPLENISH_THRES ((3 * SGE_RESPQ_E_N) / 4) +# define SGE_RX_DROP_THRES 2 + +#define SGE_RESPQ_REPLENISH_THRES (SGE_RESPQ_E_N / 4) + +/* + * Period of the TX buffer reclaim timer. This timer does not need to run + * frequently as TX buffers are usually reclaimed by new TX packets. + */ +#define TX_RECLAIM_PERIOD (HZ / 4) -#define SGE_RX_OFFSET 2 #ifndef NET_IP_ALIGN -# define NET_IP_ALIGN SGE_RX_OFFSET +# define NET_IP_ALIGN 2 #endif +#define M_CMD_LEN 0x7fffffff +#define V_CMD_LEN(v) (v) +#define G_CMD_LEN(v) ((v) & M_CMD_LEN) +#define V_CMD_GEN1(v) ((v) << 31) +#define V_CMD_GEN2(v) (v) +#define F_CMD_DATAVALID (1 << 1) +#define F_CMD_SOP (1 << 2) +#define V_CMD_EOP(v) ((v) << 3) + /* - * Memory Mapped HW Command, Freelist and Response Queue Descriptors + * Command queue, receive buffer list, and response queue descriptors. */ #if defined(__BIG_ENDIAN_BITFIELD) struct cmdQ_e { - u32 AddrLow; - u32 GenerationBit : 1; - u32 BufferLength : 31; - u32 RespQueueSelector : 4; - u32 ResponseTokens : 12; - u32 CmdId : 8; - u32 Reserved : 3; - u32 TokenValid : 1; - u32 Eop : 1; - u32 Sop : 1; - u32 DataValid : 1; - u32 GenerationBit2 : 1; - u32 AddrHigh; + u32 addr_lo; + u32 len_gen; + u32 flags; + u32 addr_hi; }; struct freelQ_e { - u32 AddrLow; - u32 GenerationBit : 1; - u32 BufferLength : 31; - u32 Reserved : 31; - u32 GenerationBit2 : 1; - u32 AddrHigh; + u32 addr_lo; + u32 len_gen; + u32 gen2; + u32 addr_hi; }; struct respQ_e { @@ -128,31 +131,19 @@ struct respQ_e { u32 GenerationBit : 1; u32 BufferLength; }; - #elif defined(__LITTLE_ENDIAN_BITFIELD) struct cmdQ_e { - u32 BufferLength : 31; - u32 GenerationBit : 1; - u32 AddrLow; - u32 AddrHigh; - u32 GenerationBit2 : 1; - u32 DataValid : 1; - u32 Sop : 1; - u32 Eop : 1; - u32 TokenValid : 1; - u32 Reserved : 3; - u32 CmdId : 8; - u32 ResponseTokens : 12; - u32 RespQueueSelector : 4; + u32 len_gen; + u32 addr_lo; + u32 addr_hi; + u32 flags; }; struct freelQ_e { - u32 BufferLength : 31; - u32 GenerationBit : 1; - u32 AddrLow; - u32 AddrHigh; - u32 GenerationBit2 : 1; - u32 Reserved : 31; + u32 len_gen; + u32 addr_lo; + u32 addr_hi; + u32 gen2; }; struct respQ_e { @@ -179,7 +170,6 @@ struct cmdQ_ce { struct sk_buff *skb; DECLARE_PCI_UNMAP_ADDR(dma_addr); DECLARE_PCI_UNMAP_LEN(dma_len); - unsigned int single; }; struct freelQ_ce { @@ -189,44 +179,52 @@ struct freelQ_ce { }; /* - * SW Command, Freelist and Response Queue + * SW command, freelist and response rings */ struct cmdQ { - atomic_t asleep; /* HW DMA Fetch status */ - atomic_t credits; /* # available descriptors for TX */ - atomic_t pio_pidx; /* Variable updated on Doorbell */ - u16 entries_n; /* # descriptors for TX */ - u16 pidx; /* producer index (SW) */ - u16 cidx; /* consumer index (HW) */ - u8 genbit; /* current generation (=valid) bit */ - struct cmdQ_e *entries; /* HW command descriptor Q */ - struct cmdQ_ce *centries; /* SW command context descriptor Q */ - spinlock_t Qlock; /* Lock to protect cmdQ enqueuing */ - dma_addr_t dma_addr; /* DMA addr HW command descriptor Q */ + unsigned long status; /* HW DMA fetch status */ + unsigned int in_use; /* # of in-use command descriptors */ + unsigned int size; /* # of descriptors */ + unsigned int processed; /* total # of descs HW has processed */ + unsigned int cleaned; /* total # of descs SW has reclaimed */ + unsigned int stop_thres; /* SW TX queue suspend threshold */ + u16 pidx; /* producer index (SW) */ + u16 cidx; /* consumer index (HW) */ + u8 genbit; /* current generation (=valid) bit */ + u8 sop; /* is next entry start of packet? */ + struct cmdQ_e *entries; /* HW command descriptor Q */ + struct cmdQ_ce *centries; /* SW command context descriptor Q */ + spinlock_t lock; /* Lock to protect cmdQ enqueuing */ + dma_addr_t dma_addr; /* DMA addr HW command descriptor Q */ }; struct freelQ { - unsigned int credits; /* # of available RX buffers */ - unsigned int entries_n; /* free list capacity */ - u16 pidx; /* producer index (SW) */ - u16 cidx; /* consumer index (HW) */ + unsigned int credits; /* # of available RX buffers */ + unsigned int size; /* free list capacity */ + u16 pidx; /* producer index (SW) */ + u16 cidx; /* consumer index (HW) */ u16 rx_buffer_size; /* Buffer size on this free list */ u16 dma_offset; /* DMA offset to align IP headers */ - u8 genbit; /* current generation (=valid) bit */ - struct freelQ_e *entries; /* HW freelist descriptor Q */ - struct freelQ_ce *centries; /* SW freelist conext descriptor Q */ - dma_addr_t dma_addr; /* DMA addr HW freelist descriptor Q */ + u16 recycleq_idx; /* skb recycle q to use */ + u8 genbit; /* current generation (=valid) bit */ + struct freelQ_e *entries; /* HW freelist descriptor Q */ + struct freelQ_ce *centries; /* SW freelist context descriptor Q */ + dma_addr_t dma_addr; /* DMA addr HW freelist descriptor Q */ }; struct respQ { - u16 credits; /* # of available respQ descriptors */ - u16 credits_pend; /* # of not yet returned descriptors */ - u16 entries_n; /* # of response Q descriptors */ - u16 pidx; /* producer index (HW) */ - u16 cidx; /* consumer index (SW) */ - u8 genbit; /* current generation(=valid) bit */ + unsigned int credits; /* credits to be returned to SGE */ + unsigned int size; /* # of response Q descriptors */ + u16 cidx; /* consumer index (SW) */ + u8 genbit; /* current generation(=valid) bit */ struct respQ_e *entries; /* HW response descriptor Q */ - dma_addr_t dma_addr; /* DMA addr HW response descriptor Q */ + dma_addr_t dma_addr; /* DMA addr HW response descriptor Q */ +}; + +/* Bit flags for cmdQ.status */ +enum { + CMDQ_STAT_RUNNING = 1, /* fetch engine is running */ + CMDQ_STAT_LAST_PKT_DB = 2 /* last packet rung the doorbell */ }; /* @@ -239,134 +237,50 @@ struct respQ { */ struct sge { struct adapter *adapter; /* adapter backpointer */ - struct freelQ freelQ[SGE_FREELQ_N]; /* freelist Q(s) */ - struct respQ respQ; /* response Q instatiation */ + struct net_device *netdev; /* netdevice backpointer */ + struct freelQ freelQ[SGE_FREELQ_N]; /* buffer free lists */ + struct respQ respQ; /* response Q */ + unsigned long stopped_tx_queues; /* bitmap of suspended Tx queues */ unsigned int rx_pkt_pad; /* RX padding for L2 packets */ unsigned int jumbo_fl; /* jumbo freelist Q index */ - u32 intrtimer[SGE_INTR_MAXBUCKETS]; /* ! */ - u32 currIndex; /* current index into intrtimer[] */ - u32 intrtimer_nres; /* no resource interrupt timer value */ - u32 sge_control; /* shadow content of sge control reg */ - struct sge_intr_counts intr_cnt; - struct timer_list ptimer; - struct sk_buff *pskb; - u32 ptimeout; - struct cmdQ cmdQ[SGE_CMDQ_N] ____cacheline_aligned; /* command Q(s)*/ + unsigned int intrtimer_nres; /* no-resource interrupt timer */ + unsigned int fixed_intrtimer;/* non-adaptive interrupt timer */ + struct timer_list tx_reclaim_timer; /* reclaims TX buffers */ + struct timer_list espibug_timer; + unsigned int espibug_timeout; + struct sk_buff *espibug_skb; + u32 sge_control; /* shadow value of sge control reg */ + struct sge_intr_counts stats; + struct sge_port_stats port_stats[MAX_NPORTS]; + struct cmdQ cmdQ[SGE_CMDQ_N] ____cacheline_aligned_in_smp; }; -static unsigned int t1_sge_tx(struct sk_buff *skb, struct adapter *adapter, - unsigned int qid); - /* * PIO to indicate that memory mapped Q contains valid descriptor(s). */ -static inline void doorbell_pio(struct sge *sge, u32 val) +static inline void doorbell_pio(struct adapter *adapter, u32 val) { wmb(); - t1_write_reg_4(sge->adapter, A_SG_DOORBELL, val); -} - -/* - * Disables the DMA engine. - */ -void t1_sge_stop(struct sge *sge) -{ - t1_write_reg_4(sge->adapter, A_SG_CONTROL, 0); - t1_read_reg_4(sge->adapter, A_SG_CONTROL); /* flush write */ - if (is_T2(sge->adapter)) - del_timer_sync(&sge->ptimer); -} - -static u8 ch_mac_addr[ETH_ALEN] = {0x0, 0x7, 0x43, 0x0, 0x0, 0x0}; -static void t1_espi_workaround(void *data) -{ - struct adapter *adapter = (struct adapter *)data; - struct sge *sge = adapter->sge; - - if (netif_running(adapter->port[0].dev) && - atomic_read(&sge->cmdQ[0].asleep)) { - - u32 seop = t1_espi_get_mon(adapter, 0x930, 0); - - if ((seop & 0xfff0fff) == 0xfff && sge->pskb) { - struct sk_buff *skb = sge->pskb; - if (!skb->cb[0]) { - memcpy(skb->data+sizeof(struct cpl_tx_pkt), ch_mac_addr, ETH_ALEN); - memcpy(skb->data+skb->len-10, ch_mac_addr, ETH_ALEN); - - skb->cb[0] = 0xff; - } - t1_sge_tx(skb, adapter,0); - } - } - mod_timer(&adapter->sge->ptimer, jiffies + sge->ptimeout); -} - -/* - * Enables the DMA engine. - */ -void t1_sge_start(struct sge *sge) -{ - t1_write_reg_4(sge->adapter, A_SG_CONTROL, sge->sge_control); - t1_read_reg_4(sge->adapter, A_SG_CONTROL); /* flush write */ - if (is_T2(sge->adapter)) { - init_timer(&sge->ptimer); - sge->ptimer.function = (void *)&t1_espi_workaround; - sge->ptimer.data = (unsigned long)sge->adapter; - sge->ptimer.expires = jiffies + sge->ptimeout; - add_timer(&sge->ptimer); - } -} - -/* - * Creates a t1_sge structure and returns suggested resource parameters. - */ -struct sge * __devinit t1_sge_create(struct adapter *adapter, - struct sge_params *p) -{ - struct sge *sge = kmalloc(sizeof(*sge), GFP_KERNEL); - - if (!sge) - return NULL; - memset(sge, 0, sizeof(*sge)); - - if (is_T2(adapter)) - sge->ptimeout = 1; /* finest allowed */ - - sge->adapter = adapter; - sge->rx_pkt_pad = t1_is_T1B(adapter) ? 0 : SGE_RX_OFFSET; - sge->jumbo_fl = t1_is_T1B(adapter) ? 1 : 0; - - p->cmdQ_size[0] = SGE_CMDQ0_E_N; - p->cmdQ_size[1] = SGE_CMDQ1_E_N; - p->freelQ_size[!sge->jumbo_fl] = SGE_FREEL_SIZE; - p->freelQ_size[sge->jumbo_fl] = SGE_JUMBO_FREEL_SIZE; - p->rx_coalesce_usecs = SGE_INTRTIMER1; - p->last_rx_coalesce_raw = SGE_INTRTIMER1 * - (board_info(sge->adapter)->clock_core / 1000000); - p->default_rx_coalesce_usecs = SGE_INTRTIMER1; - p->coalesce_enable = 0; /* Turn off adaptive algorithm by default */ - p->sample_interval_usecs = 0; - return sge; + writel(val, adapter->regs + A_SG_DOORBELL); } /* * Frees all RX buffers on the freelist Q. The caller must make sure that * the SGE is turned off before calling this function. */ -static void free_freelQ_buffers(struct pci_dev *pdev, struct freelQ *Q) +static void free_freelQ_buffers(struct pci_dev *pdev, struct freelQ *q) { - unsigned int cidx = Q->cidx, credits = Q->credits; + unsigned int cidx = q->cidx; - while (credits--) { - struct freelQ_ce *ce = &Q->centries[cidx]; + while (q->credits--) { + struct freelQ_ce *ce = &q->centries[cidx]; pci_unmap_single(pdev, pci_unmap_addr(ce, dma_addr), pci_unmap_len(ce, dma_len), PCI_DMA_FROMDEVICE); dev_kfree_skb(ce->skb); ce->skb = NULL; - if (++cidx == Q->entries_n) + if (++cidx == q->size) cidx = 0; } } @@ -380,29 +294,29 @@ static void free_rx_resources(struct sge *sge) unsigned int size, i; if (sge->respQ.entries) { - size = sizeof(struct respQ_e) * sge->respQ.entries_n; + size = sizeof(struct respQ_e) * sge->respQ.size; pci_free_consistent(pdev, size, sge->respQ.entries, sge->respQ.dma_addr); } for (i = 0; i < SGE_FREELQ_N; i++) { - struct freelQ *Q = &sge->freelQ[i]; + struct freelQ *q = &sge->freelQ[i]; - if (Q->centries) { - free_freelQ_buffers(pdev, Q); - kfree(Q->centries); + if (q->centries) { + free_freelQ_buffers(pdev, q); + kfree(q->centries); } - if (Q->entries) { - size = sizeof(struct freelQ_e) * Q->entries_n; - pci_free_consistent(pdev, size, Q->entries, - Q->dma_addr); + if (q->entries) { + size = sizeof(struct freelQ_e) * q->size; + pci_free_consistent(pdev, size, q->entries, + q->dma_addr); } } } /* * Allocates basic RX resources, consisting of memory mapped freelist Qs and a - * response Q. + * response queue. */ static int alloc_rx_resources(struct sge *sge, struct sge_params *p) { @@ -410,21 +324,22 @@ static int alloc_rx_resources(struct sge *sge, struct sge_params *p) unsigned int size, i; for (i = 0; i < SGE_FREELQ_N; i++) { - struct freelQ *Q = &sge->freelQ[i]; - - Q->genbit = 1; - Q->entries_n = p->freelQ_size[i]; - Q->dma_offset = SGE_RX_OFFSET - sge->rx_pkt_pad; - size = sizeof(struct freelQ_e) * Q->entries_n; - Q->entries = (struct freelQ_e *) - pci_alloc_consistent(pdev, size, &Q->dma_addr); - if (!Q->entries) + struct freelQ *q = &sge->freelQ[i]; + + q->genbit = 1; + q->size = p->freelQ_size[i]; + q->dma_offset = sge->rx_pkt_pad ? 0 : NET_IP_ALIGN; + size = sizeof(struct freelQ_e) * q->size; + q->entries = (struct freelQ_e *) + pci_alloc_consistent(pdev, size, &q->dma_addr); + if (!q->entries) goto err_no_mem; - memset(Q->entries, 0, size); - Q->centries = kcalloc(Q->entries_n, sizeof(struct freelQ_ce), - GFP_KERNEL); - if (!Q->centries) + memset(q->entries, 0, size); + size = sizeof(struct freelQ_ce) * q->size; + q->centries = kmalloc(size, GFP_KERNEL); + if (!q->centries) goto err_no_mem; + memset(q->centries, 0, size); } /* @@ -440,10 +355,17 @@ static int alloc_rx_resources(struct sge *sge, struct sge_params *p) sge->freelQ[sge->jumbo_fl].rx_buffer_size = (16 * 1024) - SKB_DATA_ALIGN(sizeof(struct skb_shared_info)); + /* + * Setup which skb recycle Q should be used when recycling buffers from + * each free list. + */ + sge->freelQ[!sge->jumbo_fl].recycleq_idx = 0; + sge->freelQ[sge->jumbo_fl].recycleq_idx = 1; + sge->respQ.genbit = 1; - sge->respQ.entries_n = SGE_RESPQ_E_N; - sge->respQ.credits = SGE_RESPQ_E_N; - size = sizeof(struct respQ_e) * sge->respQ.entries_n; + sge->respQ.size = SGE_RESPQ_E_N; + sge->respQ.credits = 0; + size = sizeof(struct respQ_e) * sge->respQ.size; sge->respQ.entries = (struct respQ_e *) pci_alloc_consistent(pdev, size, &sge->respQ.dma_addr); if (!sge->respQ.entries) @@ -457,48 +379,37 @@ err_no_mem: } /* - * Frees 'credits_pend' TX buffers and returns the credits to Q->credits. - * - * The adaptive algorithm receives the total size of the buffers freed - * accumulated in @*totpayload. No initialization of this argument here. - * + * Reclaims n TX descriptors and frees the buffers associated with them. */ -static void free_cmdQ_buffers(struct sge *sge, struct cmdQ *Q, - unsigned int credits_pend, unsigned int *totpayload) +static void free_cmdQ_buffers(struct sge *sge, struct cmdQ *q, unsigned int n) { + struct cmdQ_ce *ce; struct pci_dev *pdev = sge->adapter->pdev; - struct sk_buff *skb; - struct cmdQ_ce *ce, *cq = Q->centries; - unsigned int entries_n = Q->entries_n, cidx = Q->cidx, - i = credits_pend; - + unsigned int cidx = q->cidx; - ce = &cq[cidx]; - while (i--) { - if (ce->single) + q->in_use -= n; + ce = &q->centries[cidx]; + while (n--) { + if (q->sop) pci_unmap_single(pdev, pci_unmap_addr(ce, dma_addr), - pci_unmap_len(ce, dma_len), + pci_unmap_len(ce, dma_len), PCI_DMA_TODEVICE); else pci_unmap_page(pdev, pci_unmap_addr(ce, dma_addr), - pci_unmap_len(ce, dma_len), + pci_unmap_len(ce, dma_len), PCI_DMA_TODEVICE); - if (totpayload) - *totpayload += pci_unmap_len(ce, dma_len); - - skb = ce->skb; - if (skb) - dev_kfree_skb_irq(skb); - + q->sop = 0; + if (ce->skb) { + dev_kfree_skb(ce->skb); + q->sop = 1; + } ce++; - if (++cidx == entries_n) { + if (++cidx == q->size) { cidx = 0; - ce = cq; + ce = q->centries; } } - - Q->cidx = cidx; - atomic_add(credits_pend, &Q->credits); + q->cidx = cidx; } /* @@ -512,20 +423,17 @@ static void free_tx_resources(struct sge *sge) unsigned int size, i; for (i = 0; i < SGE_CMDQ_N; i++) { - struct cmdQ *Q = &sge->cmdQ[i]; + struct cmdQ *q = &sge->cmdQ[i]; - if (Q->centries) { - unsigned int pending = Q->entries_n - - atomic_read(&Q->credits); - - if (pending) - free_cmdQ_buffers(sge, Q, pending, NULL); - kfree(Q->centries); + if (q->centries) { + if (q->in_use) + free_cmdQ_buffers(sge, q, q->in_use); + kfree(q->centries); } - if (Q->entries) { - size = sizeof(struct cmdQ_e) * Q->entries_n; - pci_free_consistent(pdev, size, Q->entries, - Q->dma_addr); + if (q->entries) { + size = sizeof(struct cmdQ_e) * q->size; + pci_free_consistent(pdev, size, q->entries, + q->dma_addr); } } } @@ -539,25 +447,38 @@ static int alloc_tx_resources(struct sge *sge, struct sge_params *p) unsigned int size, i; for (i = 0; i < SGE_CMDQ_N; i++) { - struct cmdQ *Q = &sge->cmdQ[i]; - - Q->genbit = 1; - Q->entries_n = p->cmdQ_size[i]; - atomic_set(&Q->credits, Q->entries_n); - atomic_set(&Q->asleep, 1); - spin_lock_init(&Q->Qlock); - size = sizeof(struct cmdQ_e) * Q->entries_n; - Q->entries = (struct cmdQ_e *) - pci_alloc_consistent(pdev, size, &Q->dma_addr); - if (!Q->entries) + struct cmdQ *q = &sge->cmdQ[i]; + + q->genbit = 1; + q->sop = 1; + q->size = p->cmdQ_size[i]; + q->in_use = 0; + q->status = 0; + q->processed = q->cleaned = 0; + q->stop_thres = 0; + spin_lock_init(&q->lock); + size = sizeof(struct cmdQ_e) * q->size; + q->entries = (struct cmdQ_e *) + pci_alloc_consistent(pdev, size, &q->dma_addr); + if (!q->entries) goto err_no_mem; - memset(Q->entries, 0, size); - Q->centries = kcalloc(Q->entries_n, sizeof(struct cmdQ_ce), - GFP_KERNEL); - if (!Q->centries) + memset(q->entries, 0, size); + size = sizeof(struct cmdQ_ce) * q->size; + q->centries = kmalloc(size, GFP_KERNEL); + if (!q->centries) goto err_no_mem; + memset(q->centries, 0, size); } + /* + * CommandQ 0 handles Ethernet and TOE packets, while queue 1 is TOE + * only. For queue 0 set the stop threshold so we can handle one more + * packet from each port, plus reserve an additional 24 entries for + * Ethernet packets only. Queue 1 never suspends nor do we reserve + * space for Ethernet packets. + */ + sge->cmdQ[0].stop_thres = sge->adapter->params.nports * + (MAX_SKB_FRAGS + 1); return 0; err_no_mem: @@ -569,9 +490,9 @@ static inline void setup_ring_params(struct adapter *adapter, u64 addr, u32 size, int base_reg_lo, int base_reg_hi, int size_reg) { - t1_write_reg_4(adapter, base_reg_lo, (u32)addr); - t1_write_reg_4(adapter, base_reg_hi, addr >> 32); - t1_write_reg_4(adapter, size_reg, size); + writel((u32)addr, adapter->regs + base_reg_lo); + writel(addr >> 32, adapter->regs + base_reg_hi); + writel(size, adapter->regs + size_reg); } /* @@ -585,29 +506,11 @@ void t1_set_vlan_accel(struct adapter *adapter, int on_off) if (on_off) sge->sge_control |= F_VLAN_XTRACT; if (adapter->open_device_map) { - t1_write_reg_4(adapter, A_SG_CONTROL, sge->sge_control); - t1_read_reg_4(adapter, A_SG_CONTROL); /* flush */ + writel(sge->sge_control, adapter->regs + A_SG_CONTROL); + readl(adapter->regs + A_SG_CONTROL); /* flush */ } } -/* - * Sets the interrupt latency timer when the adaptive Rx coalescing - * is turned off. Do nothing when it is turned on again. - * - * This routine relies on the fact that the caller has already set - * the adaptive policy in adapter->sge_params before calling it. -*/ -int t1_sge_set_coalesce_params(struct sge *sge, struct sge_params *p) -{ - if (!p->coalesce_enable) { - u32 newTimer = p->rx_coalesce_usecs * - (board_info(sge->adapter)->clock_core / 1000000); - - t1_write_reg_4(sge->adapter, A_SG_INTRTIMER, newTimer); - } - return 0; -} - /* * Programs the various SGE registers. However, the engine is not yet enabled, * but sge->sge_control is setup and ready to go. @@ -615,67 +518,40 @@ int t1_sge_set_coalesce_params(struct sge *sge, struct sge_params *p) static void configure_sge(struct sge *sge, struct sge_params *p) { struct adapter *ap = sge->adapter; - int i; - - t1_write_reg_4(ap, A_SG_CONTROL, 0); - setup_ring_params(ap, sge->cmdQ[0].dma_addr, sge->cmdQ[0].entries_n, + + writel(0, ap->regs + A_SG_CONTROL); + setup_ring_params(ap, sge->cmdQ[0].dma_addr, sge->cmdQ[0].size, A_SG_CMD0BASELWR, A_SG_CMD0BASEUPR, A_SG_CMD0SIZE); - setup_ring_params(ap, sge->cmdQ[1].dma_addr, sge->cmdQ[1].entries_n, + setup_ring_params(ap, sge->cmdQ[1].dma_addr, sge->cmdQ[1].size, A_SG_CMD1BASELWR, A_SG_CMD1BASEUPR, A_SG_CMD1SIZE); setup_ring_params(ap, sge->freelQ[0].dma_addr, - sge->freelQ[0].entries_n, A_SG_FL0BASELWR, + sge->freelQ[0].size, A_SG_FL0BASELWR, A_SG_FL0BASEUPR, A_SG_FL0SIZE); setup_ring_params(ap, sge->freelQ[1].dma_addr, - sge->freelQ[1].entries_n, A_SG_FL1BASELWR, + sge->freelQ[1].size, A_SG_FL1BASELWR, A_SG_FL1BASEUPR, A_SG_FL1SIZE); /* The threshold comparison uses <. */ - t1_write_reg_4(ap, A_SG_FLTHRESHOLD, SGE_RX_SM_BUF_SIZE + 1); + writel(SGE_RX_SM_BUF_SIZE + 1, ap->regs + A_SG_FLTHRESHOLD); - setup_ring_params(ap, sge->respQ.dma_addr, sge->respQ.entries_n, - A_SG_RSPBASELWR, A_SG_RSPBASEUPR, A_SG_RSPSIZE); - t1_write_reg_4(ap, A_SG_RSPQUEUECREDIT, (u32)sge->respQ.entries_n); + setup_ring_params(ap, sge->respQ.dma_addr, sge->respQ.size, + A_SG_RSPBASELWR, A_SG_RSPBASEUPR, A_SG_RSPSIZE); + writel((u32)sge->respQ.size - 1, ap->regs + A_SG_RSPQUEUECREDIT); sge->sge_control = F_CMDQ0_ENABLE | F_CMDQ1_ENABLE | F_FL0_ENABLE | F_FL1_ENABLE | F_CPL_ENABLE | F_RESPONSE_QUEUE_ENABLE | V_CMDQ_PRIORITY(2) | F_DISABLE_CMDQ1_GTS | F_ISCSI_COALESCE | + F_DISABLE_FL0_GTS | F_DISABLE_FL1_GTS | V_RX_PKT_OFFSET(sge->rx_pkt_pad); #if defined(__BIG_ENDIAN_BITFIELD) sge->sge_control |= F_ENABLE_BIG_ENDIAN; #endif - /* - * Initialize the SGE Interrupt Timer arrray: - * intrtimer[0] = (SGE_INTRTIMER0) usec - * intrtimer[0intrtimer[0] = board_info(sge->adapter)->clock_core / 1000000; - for (i = 1; i < SGE_INTR_LATBUCKETS; ++i) { - sge->intrtimer[i] = SGE_INTRTIMER0 + (2 * i); - sge->intrtimer[i] *= sge->intrtimer[0]; - } - for (i = SGE_INTR_LATBUCKETS; i < SGE_INTR_MAXBUCKETS - 1; ++i) { - sge->intrtimer[i] = (i - 3) * 6; - sge->intrtimer[i] *= sge->intrtimer[0]; - } - sge->intrtimer[SGE_INTR_MAXBUCKETS - 1] = - sge->intrtimer[0] * SGE_INTRTIMER1; - /* Initialize resource timer */ - sge->intrtimer_nres = sge->intrtimer[0] * SGE_INTRTIMER_NRES; - /* Finally finish initialization of intrtimer[0] */ - sge->intrtimer[0] *= SGE_INTRTIMER0; - /* Initialize for a throughput oriented workload */ - sge->currIndex = SGE_INTR_MAXBUCKETS - 1; - - if (p->coalesce_enable) - t1_write_reg_4(ap, A_SG_INTRTIMER, - sge->intrtimer[sge->currIndex]); - else - t1_sge_set_coalesce_params(sge, p); + /* Initialize no-resource timer */ + sge->intrtimer_nres = SGE_INTRTIMER_NRES * core_ticks_per_usec(ap); + + t1_sge_set_coalesce_params(sge, p); } /* @@ -684,31 +560,8 @@ static void configure_sge(struct sge *sge, struct sge_params *p) static inline unsigned int jumbo_payload_capacity(const struct sge *sge) { return sge->freelQ[sge->jumbo_fl].rx_buffer_size - - sizeof(struct cpl_rx_data) - SGE_RX_OFFSET + sge->rx_pkt_pad; -} - -/* - * Allocates both RX and TX resources and configures the SGE. However, - * the hardware is not enabled yet. - */ -int t1_sge_configure(struct sge *sge, struct sge_params *p) -{ - if (alloc_rx_resources(sge, p)) - return -ENOMEM; - if (alloc_tx_resources(sge, p)) { - free_rx_resources(sge); - return -ENOMEM; - } - configure_sge(sge, p); - - /* - * Now that we have sized the free lists calculate the payload - * capacity of the large buffers. Other parts of the driver use - * this to set the max offload coalescing size so that RX packets - * do not overflow our large buffers. - */ - p->large_buf_capacity = jumbo_payload_capacity(sge); - return 0; + sge->freelQ[sge->jumbo_fl].dma_offset - + sizeof(struct cpl_rx_data); } /* @@ -716,8 +569,9 @@ int t1_sge_configure(struct sge *sge, struct sge_params *p) */ void t1_sge_destroy(struct sge *sge) { - if (sge->pskb) - dev_kfree_skb(sge->pskb); + if (sge->espibug_skb) + kfree_skb(sge->espibug_skb); + free_tx_resources(sge); free_rx_resources(sge); kfree(sge); @@ -735,75 +589,75 @@ void t1_sge_destroy(struct sge *sge) * we specify a RX_OFFSET in order to make sure that the IP header is 4B * aligned. */ -static void refill_free_list(struct sge *sge, struct freelQ *Q) +static void refill_free_list(struct sge *sge, struct freelQ *q) { struct pci_dev *pdev = sge->adapter->pdev; - struct freelQ_ce *ce = &Q->centries[Q->pidx]; - struct freelQ_e *e = &Q->entries[Q->pidx]; - unsigned int dma_len = Q->rx_buffer_size - Q->dma_offset; + struct freelQ_ce *ce = &q->centries[q->pidx]; + struct freelQ_e *e = &q->entries[q->pidx]; + unsigned int dma_len = q->rx_buffer_size - q->dma_offset; - while (Q->credits < Q->entries_n) { - if (e->GenerationBit != Q->genbit) { - struct sk_buff *skb; - dma_addr_t mapping; + while (q->credits < q->size) { + struct sk_buff *skb; + dma_addr_t mapping; - skb = alloc_skb(Q->rx_buffer_size, GFP_ATOMIC); - if (!skb) - break; - if (Q->dma_offset) - skb_reserve(skb, Q->dma_offset); - mapping = pci_map_single(pdev, skb->data, dma_len, - PCI_DMA_FROMDEVICE); - ce->skb = skb; - pci_unmap_addr_set(ce, dma_addr, mapping); - pci_unmap_len_set(ce, dma_len, dma_len); - e->AddrLow = (u32)mapping; - e->AddrHigh = (u64)mapping >> 32; - e->BufferLength = dma_len; - e->GenerationBit = e->GenerationBit2 = Q->genbit; - } + skb = alloc_skb(q->rx_buffer_size, GFP_ATOMIC); + if (!skb) + break; + + skb_reserve(skb, q->dma_offset); + mapping = pci_map_single(pdev, skb->data, dma_len, + PCI_DMA_FROMDEVICE); + ce->skb = skb; + pci_unmap_addr_set(ce, dma_addr, mapping); + pci_unmap_len_set(ce, dma_len, dma_len); + e->addr_lo = (u32)mapping; + e->addr_hi = (u64)mapping >> 32; + e->len_gen = V_CMD_LEN(dma_len) | V_CMD_GEN1(q->genbit); + wmb(); + e->gen2 = V_CMD_GEN2(q->genbit); e++; ce++; - if (++Q->pidx == Q->entries_n) { - Q->pidx = 0; - Q->genbit ^= 1; - ce = Q->centries; - e = Q->entries; + if (++q->pidx == q->size) { + q->pidx = 0; + q->genbit ^= 1; + ce = q->centries; + e = q->entries; } - Q->credits++; + q->credits++; } } /* - * Calls refill_free_list for both freelist Qs. If we cannot - * fill at least 1/4 of both Qs, we go into 'few interrupt mode' in order - * to give the system time to free up resources. + * Calls refill_free_list for both free lists. If we cannot fill at least 1/4 + * of both rings, we go into 'few interrupt mode' in order to give the system + * time to free up resources. */ static void freelQs_empty(struct sge *sge) { - u32 irq_reg = t1_read_reg_4(sge->adapter, A_SG_INT_ENABLE); + struct adapter *adapter = sge->adapter; + u32 irq_reg = readl(adapter->regs + A_SG_INT_ENABLE); u32 irqholdoff_reg; refill_free_list(sge, &sge->freelQ[0]); refill_free_list(sge, &sge->freelQ[1]); - if (sge->freelQ[0].credits > (sge->freelQ[0].entries_n >> 2) && - sge->freelQ[1].credits > (sge->freelQ[1].entries_n >> 2)) { + if (sge->freelQ[0].credits > (sge->freelQ[0].size >> 2) && + sge->freelQ[1].credits > (sge->freelQ[1].size >> 2)) { irq_reg |= F_FL_EXHAUSTED; - irqholdoff_reg = sge->intrtimer[sge->currIndex]; + irqholdoff_reg = sge->fixed_intrtimer; } else { /* Clear the F_FL_EXHAUSTED interrupts for now */ irq_reg &= ~F_FL_EXHAUSTED; irqholdoff_reg = sge->intrtimer_nres; } - t1_write_reg_4(sge->adapter, A_SG_INTRTIMER, irqholdoff_reg); - t1_write_reg_4(sge->adapter, A_SG_INT_ENABLE, irq_reg); + writel(irqholdoff_reg, adapter->regs + A_SG_INTRTIMER); + writel(irq_reg, adapter->regs + A_SG_INT_ENABLE); /* We reenable the Qs to force a freelist GTS interrupt later */ - doorbell_pio(sge, F_FL0_ENABLE | F_FL1_ENABLE); + doorbell_pio(adapter, F_FL0_ENABLE | F_FL1_ENABLE); } #define SGE_PL_INTR_MASK (F_PL_INTR_SGE_ERR | F_PL_INTR_SGE_DATA) @@ -816,10 +670,10 @@ static void freelQs_empty(struct sge *sge) */ void t1_sge_intr_disable(struct sge *sge) { - u32 val = t1_read_reg_4(sge->adapter, A_PL_ENABLE); + u32 val = readl(sge->adapter->regs + A_PL_ENABLE); - t1_write_reg_4(sge->adapter, A_PL_ENABLE, val & ~SGE_PL_INTR_MASK); - t1_write_reg_4(sge->adapter, A_SG_INT_ENABLE, 0); + writel(val & ~SGE_PL_INTR_MASK, sge->adapter->regs + A_PL_ENABLE); + writel(0, sge->adapter->regs + A_SG_INT_ENABLE); } /* @@ -828,12 +682,12 @@ void t1_sge_intr_disable(struct sge *sge) void t1_sge_intr_enable(struct sge *sge) { u32 en = SGE_INT_ENABLE; - u32 val = t1_read_reg_4(sge->adapter, A_PL_ENABLE); + u32 val = readl(sge->adapter->regs + A_PL_ENABLE); if (sge->adapter->flags & TSO_CAPABLE) en &= ~F_PACKET_TOO_BIG; - t1_write_reg_4(sge->adapter, A_SG_INT_ENABLE, en); - t1_write_reg_4(sge->adapter, A_PL_ENABLE, val | SGE_PL_INTR_MASK); + writel(en, sge->adapter->regs + A_SG_INT_ENABLE); + writel(val | SGE_PL_INTR_MASK, sge->adapter->regs + A_PL_ENABLE); } /* @@ -841,8 +695,8 @@ void t1_sge_intr_enable(struct sge *sge) */ void t1_sge_intr_clear(struct sge *sge) { - t1_write_reg_4(sge->adapter, A_PL_CAUSE, SGE_PL_INTR_MASK); - t1_write_reg_4(sge->adapter, A_SG_INT_CAUSE, 0xffffffff); + writel(SGE_PL_INTR_MASK, sge->adapter->regs + A_PL_CAUSE); + writel(0xffffffff, sge->adapter->regs + A_SG_INT_CAUSE); } /* @@ -851,464 +705,673 @@ void t1_sge_intr_clear(struct sge *sge) int t1_sge_intr_error_handler(struct sge *sge) { struct adapter *adapter = sge->adapter; - u32 cause = t1_read_reg_4(adapter, A_SG_INT_CAUSE); + u32 cause = readl(adapter->regs + A_SG_INT_CAUSE); if (adapter->flags & TSO_CAPABLE) cause &= ~F_PACKET_TOO_BIG; if (cause & F_RESPQ_EXHAUSTED) - sge->intr_cnt.respQ_empty++; + sge->stats.respQ_empty++; if (cause & F_RESPQ_OVERFLOW) { - sge->intr_cnt.respQ_overflow++; + sge->stats.respQ_overflow++; CH_ALERT("%s: SGE response queue overflow\n", adapter->name); } if (cause & F_FL_EXHAUSTED) { - sge->intr_cnt.freelistQ_empty++; + sge->stats.freelistQ_empty++; freelQs_empty(sge); } if (cause & F_PACKET_TOO_BIG) { - sge->intr_cnt.pkt_too_big++; + sge->stats.pkt_too_big++; CH_ALERT("%s: SGE max packet size exceeded\n", adapter->name); } if (cause & F_PACKET_MISMATCH) { - sge->intr_cnt.pkt_mismatch++; + sge->stats.pkt_mismatch++; CH_ALERT("%s: SGE packet mismatch\n", adapter->name); } if (cause & SGE_INT_FATAL) t1_fatal_err(adapter); - t1_write_reg_4(adapter, A_SG_INT_CAUSE, cause); + writel(cause, adapter->regs + A_SG_INT_CAUSE); return 0; } -/* - * The following code is copied from 2.6, where the skb_pull is doing the - * right thing and only pulls ETH_HLEN. +const struct sge_intr_counts *t1_sge_get_intr_counts(struct sge *sge) +{ + return &sge->stats; +} + +const struct sge_port_stats *t1_sge_get_port_stats(struct sge *sge, int port) +{ + return &sge->port_stats[port]; +} + +/** + * recycle_fl_buf - recycle a free list buffer + * @fl: the free list + * @idx: index of buffer to recycle * - * Determine the packet's protocol ID. The rule here is that we - * assume 802.3 if the type field is short enough to be a length. - * This is normal practice and works for any 'now in use' protocol. + * Recycles the specified buffer on the given free list by adding it at + * the next available slot on the list. */ -static unsigned short sge_eth_type_trans(struct sk_buff *skb, - struct net_device *dev) +static void recycle_fl_buf(struct freelQ *fl, int idx) { - struct ethhdr *eth; - unsigned char *rawp; + struct freelQ_e *from = &fl->entries[idx]; + struct freelQ_e *to = &fl->entries[fl->pidx]; - skb->mac.raw = skb->data; - skb_pull(skb, ETH_HLEN); - eth = (struct ethhdr *)skb->mac.raw; + fl->centries[fl->pidx] = fl->centries[idx]; + to->addr_lo = from->addr_lo; + to->addr_hi = from->addr_hi; + to->len_gen = G_CMD_LEN(from->len_gen) | V_CMD_GEN1(fl->genbit); + wmb(); + to->gen2 = V_CMD_GEN2(fl->genbit); + fl->credits++; - if (*eth->h_dest&1) { - if(memcmp(eth->h_dest, dev->broadcast, ETH_ALEN) == 0) - skb->pkt_type = PACKET_BROADCAST; - else - skb->pkt_type = PACKET_MULTICAST; + if (++fl->pidx == fl->size) { + fl->pidx = 0; + fl->genbit ^= 1; } +} - /* - * This ALLMULTI check should be redundant by 1.4 - * so don't forget to remove it. - * - * Seems, you forgot to remove it. All silly devices - * seems to set IFF_PROMISC. - */ +/** + * get_packet - return the next ingress packet buffer + * @pdev: the PCI device that received the packet + * @fl: the SGE free list holding the packet + * @len: the actual packet length, excluding any SGE padding + * @dma_pad: padding at beginning of buffer left by SGE DMA + * @skb_pad: padding to be used if the packet is copied + * @copy_thres: length threshold under which a packet should be copied + * @drop_thres: # of remaining buffers before we start dropping packets + * + * Get the next packet from a free list and complete setup of the + * sk_buff. If the packet is small we make a copy and recycle the + * original buffer, otherwise we use the original buffer itself. If a + * positive drop threshold is supplied packets are dropped and their + * buffers recycled if (a) the number of remaining buffers is under the + * threshold and the packet is too big to copy, or (b) the packet should + * be copied but there is no memory for the copy. + */ +static inline struct sk_buff *get_packet(struct pci_dev *pdev, + struct freelQ *fl, unsigned int len, + int dma_pad, int skb_pad, + unsigned int copy_thres, + unsigned int drop_thres) +{ + struct sk_buff *skb; + struct freelQ_ce *ce = &fl->centries[fl->cidx]; + + if (len < copy_thres) { + skb = alloc_skb(len + skb_pad, GFP_ATOMIC); + if (likely(skb != NULL)) { + skb_reserve(skb, skb_pad); + skb_put(skb, len); + pci_dma_sync_single_for_cpu(pdev, + pci_unmap_addr(ce, dma_addr), + pci_unmap_len(ce, dma_len), + PCI_DMA_FROMDEVICE); + memcpy(skb->data, ce->skb->data + dma_pad, len); + pci_dma_sync_single_for_device(pdev, + pci_unmap_addr(ce, dma_addr), + pci_unmap_len(ce, dma_len), + PCI_DMA_FROMDEVICE); + } else if (!drop_thres) + goto use_orig_buf; - else if (1 /*dev->flags&IFF_PROMISC*/) - { - if(memcmp(eth->h_dest,dev->dev_addr, ETH_ALEN)) - skb->pkt_type=PACKET_OTHERHOST; + recycle_fl_buf(fl, fl->cidx); + return skb; } - if (ntohs(eth->h_proto) >= 1536) - return eth->h_proto; - - rawp = skb->data; + if (fl->credits < drop_thres) { + recycle_fl_buf(fl, fl->cidx); + return NULL; + } - /* - * This is a magic hack to spot IPX packets. Older Novell breaks - * the protocol design and runs IPX over 802.3 without an 802.2 LLC - * layer. We look for FFFF which isn't a used 802.2 SSAP/DSAP. This - * won't work for fault tolerant netware but does for the rest. - */ - if (*(unsigned short *)rawp == 0xFFFF) - return htons(ETH_P_802_3); +use_orig_buf: + pci_unmap_single(pdev, pci_unmap_addr(ce, dma_addr), + pci_unmap_len(ce, dma_len), PCI_DMA_FROMDEVICE); + skb = ce->skb; + skb_reserve(skb, dma_pad); + skb_put(skb, len); + return skb; +} - /* - * Real 802.2 LLC - */ - return htons(ETH_P_802_2); +/** + * unexpected_offload - handle an unexpected offload packet + * @adapter: the adapter + * @fl: the free list that received the packet + * + * Called when we receive an unexpected offload packet (e.g., the TOE + * function is disabled or the card is a NIC). Prints a message and + * recycles the buffer. + */ +static void unexpected_offload(struct adapter *adapter, struct freelQ *fl) +{ + struct freelQ_ce *ce = &fl->centries[fl->cidx]; + struct sk_buff *skb = ce->skb; + + pci_dma_sync_single_for_cpu(adapter->pdev, pci_unmap_addr(ce, dma_addr), + pci_unmap_len(ce, dma_len), PCI_DMA_FROMDEVICE); + CH_ERR("%s: unexpected offload packet, cmd %u\n", + adapter->name, *skb->data); + recycle_fl_buf(fl, fl->cidx); } /* - * Prepare the received buffer and pass it up the stack. If it is small enough - * and allocation doesn't fail, we use a new sk_buff and copy the content. + * Write the command descriptors to transmit the given skb starting at + * descriptor pidx with the given generation. */ -static unsigned int t1_sge_rx(struct sge *sge, struct freelQ *Q, - unsigned int len, unsigned int offload) +static inline void write_tx_descs(struct adapter *adapter, struct sk_buff *skb, + unsigned int pidx, unsigned int gen, + struct cmdQ *q) { - struct sk_buff *skb; - struct adapter *adapter = sge->adapter; - struct freelQ_ce *ce = &Q->centries[Q->cidx]; + dma_addr_t mapping; + struct cmdQ_e *e, *e1; + struct cmdQ_ce *ce; + unsigned int i, flags, nfrags = skb_shinfo(skb)->nr_frags; + + mapping = pci_map_single(adapter->pdev, skb->data, + skb->len - skb->data_len, PCI_DMA_TODEVICE); + ce = &q->centries[pidx]; + ce->skb = NULL; + pci_unmap_addr_set(ce, dma_addr, mapping); + pci_unmap_len_set(ce, dma_len, skb->len - skb->data_len); - if (len <= SGE_RX_COPY_THRESHOLD && - (skb = alloc_skb(len + NET_IP_ALIGN, GFP_ATOMIC))) { - struct freelQ_e *e; - char *src = ce->skb->data; + flags = F_CMD_DATAVALID | F_CMD_SOP | V_CMD_EOP(nfrags == 0) | + V_CMD_GEN2(gen); + e = &q->entries[pidx]; + e->addr_lo = (u32)mapping; + e->addr_hi = (u64)mapping >> 32; + e->len_gen = V_CMD_LEN(skb->len - skb->data_len) | V_CMD_GEN1(gen); + for (e1 = e, i = 0; nfrags--; i++) { + skb_frag_t *frag = &skb_shinfo(skb)->frags[i]; - pci_dma_sync_single_for_cpu(adapter->pdev, - pci_unmap_addr(ce, dma_addr), - pci_unmap_len(ce, dma_len), - PCI_DMA_FROMDEVICE); - if (!offload) { - skb_reserve(skb, NET_IP_ALIGN); - src += sge->rx_pkt_pad; + ce++; + e1++; + if (++pidx == q->size) { + pidx = 0; + gen ^= 1; + ce = q->centries; + e1 = q->entries; } - memcpy(skb->data, src, len); - /* Reuse the entry. */ - e = &Q->entries[Q->cidx]; - e->GenerationBit ^= 1; - e->GenerationBit2 ^= 1; - } else { - pci_unmap_single(adapter->pdev, pci_unmap_addr(ce, dma_addr), - pci_unmap_len(ce, dma_len), - PCI_DMA_FROMDEVICE); - skb = ce->skb; - if (!offload && sge->rx_pkt_pad) - __skb_pull(skb, sge->rx_pkt_pad); + mapping = pci_map_page(adapter->pdev, frag->page, + frag->page_offset, frag->size, + PCI_DMA_TODEVICE); + ce->skb = NULL; + pci_unmap_addr_set(ce, dma_addr, mapping); + pci_unmap_len_set(ce, dma_len, frag->size); + + e1->addr_lo = (u32)mapping; + e1->addr_hi = (u64)mapping >> 32; + e1->len_gen = V_CMD_LEN(frag->size) | V_CMD_GEN1(gen); + e1->flags = F_CMD_DATAVALID | V_CMD_EOP(nfrags == 0) | + V_CMD_GEN2(gen); } - skb_put(skb, len); + ce->skb = skb; + wmb(); + e->flags = flags; +} +/* + * Clean up completed Tx buffers. + */ +static inline void reclaim_completed_tx(struct sge *sge, struct cmdQ *q) +{ + unsigned int reclaim = q->processed - q->cleaned; - if (unlikely(offload)) { - { - printk(KERN_ERR - "%s: unexpected offloaded packet, cmd %u\n", - adapter->name, *skb->data); - dev_kfree_skb_any(skb); - } - } else { - struct cpl_rx_pkt *p = (struct cpl_rx_pkt *)skb->data; - - skb_pull(skb, sizeof(*p)); - skb->dev = adapter->port[p->iff].dev; - skb->dev->last_rx = jiffies; - skb->protocol = sge_eth_type_trans(skb, skb->dev); - if ((adapter->flags & RX_CSUM_ENABLED) && p->csum == 0xffff && - skb->protocol == htons(ETH_P_IP) && - (skb->data[9] == IPPROTO_TCP || - skb->data[9] == IPPROTO_UDP)) - skb->ip_summed = CHECKSUM_UNNECESSARY; - else - skb->ip_summed = CHECKSUM_NONE; - if (adapter->vlan_grp && p->vlan_valid) - vlan_hwaccel_rx(skb, adapter->vlan_grp, - ntohs(p->vlan)); - else - netif_rx(skb); + if (reclaim) { + free_cmdQ_buffers(sge, q, reclaim); + q->cleaned += reclaim; } +} - if (++Q->cidx == Q->entries_n) - Q->cidx = 0; +#ifndef SET_ETHTOOL_OPS +# define __netif_rx_complete(dev) netif_rx_complete(dev) +#endif - if (unlikely(--Q->credits < Q->entries_n - SGE_FREEL_REFILL_THRESH)) - refill_free_list(sge, Q); - return 1; +/* + * We cannot use the standard netif_rx_schedule_prep() because we have multiple + * ports plus the TOE all multiplexing onto a single response queue, therefore + * accepting new responses cannot depend on the state of any particular port. + * So define our own equivalent that omits the netif_running() test. + */ +static inline int napi_schedule_prep(struct net_device *dev) +{ + return !test_and_set_bit(__LINK_STATE_RX_SCHED, &dev->state); } -/* - * Adaptive interrupt timer logic to keep the CPU utilization to - * manageable levels. Basically, as the Average Packet Size (APS) - * gets higher, the interrupt latency setting gets longer. Every - * SGE_INTR_BUCKETSIZE (of 100B) causes a bump of 2usec to the - * base value of SGE_INTRTIMER0. At large values of payload the - * latency hits the ceiling value of SGE_INTRTIMER1 stored at - * index SGE_INTR_MAXBUCKETS-1 in sge->intrtimer[]. +/** + * sge_rx - process an ingress ethernet packet + * @sge: the sge structure + * @fl: the free list that contains the packet buffer + * @len: the packet length * - * sge->currIndex caches the last index to save unneeded PIOs. + * Process an ingress ethernet pakcet and deliver it to the stack. */ -static inline void update_intr_timer(struct sge *sge, unsigned int avg_payload) +static int sge_rx(struct sge *sge, struct freelQ *fl, unsigned int len) { - unsigned int newIndex; + struct sk_buff *skb; + struct cpl_rx_pkt *p; + struct adapter *adapter = sge->adapter; - newIndex = avg_payload / SGE_INTR_BUCKETSIZE; - if (newIndex > SGE_INTR_MAXBUCKETS - 1) { - newIndex = SGE_INTR_MAXBUCKETS - 1; - } - /* Save a PIO with this check....maybe */ - if (newIndex != sge->currIndex) { - t1_write_reg_4(sge->adapter, A_SG_INTRTIMER, - sge->intrtimer[newIndex]); - sge->currIndex = newIndex; - sge->adapter->params.sge.last_rx_coalesce_raw = - sge->intrtimer[newIndex]; + sge->stats.ethernet_pkts++; + skb = get_packet(adapter->pdev, fl, len - sge->rx_pkt_pad, + sge->rx_pkt_pad, 2, SGE_RX_COPY_THRES, + SGE_RX_DROP_THRES); + if (!skb) { + sge->port_stats[0].rx_drops++; /* charge only port 0 for now */ + return 0; } + + p = (struct cpl_rx_pkt *)skb->data; + skb_pull(skb, sizeof(*p)); + skb->dev = adapter->port[p->iff].dev; + skb->dev->last_rx = jiffies; + skb->protocol = eth_type_trans(skb, skb->dev); + if ((adapter->flags & RX_CSUM_ENABLED) && p->csum == 0xffff && + skb->protocol == htons(ETH_P_IP) && + (skb->data[9] == IPPROTO_TCP || skb->data[9] == IPPROTO_UDP)) { + sge->port_stats[p->iff].rx_cso_good++; + skb->ip_summed = CHECKSUM_UNNECESSARY; + } else + skb->ip_summed = CHECKSUM_NONE; + + if (unlikely(adapter->vlan_grp && p->vlan_valid)) { + sge->port_stats[p->iff].vlan_xtract++; + if (adapter->params.sge.polling) + vlan_hwaccel_receive_skb(skb, adapter->vlan_grp, + ntohs(p->vlan)); + else + vlan_hwaccel_rx(skb, adapter->vlan_grp, + ntohs(p->vlan)); + } else if (adapter->params.sge.polling) + netif_receive_skb(skb); + else + netif_rx(skb); + return 0; } /* - * Returns true if command queue q_num has enough available descriptors that + * Returns true if a command queue has enough available descriptors that * we can resume Tx operation after temporarily disabling its packet queue. */ -static inline int enough_free_Tx_descs(struct sge *sge, int q_num) +static inline int enough_free_Tx_descs(const struct cmdQ *q) { - return atomic_read(&sge->cmdQ[q_num].credits) > - (sge->cmdQ[q_num].entries_n >> 2); + unsigned int r = q->processed - q->cleaned; + + return q->in_use - r < (q->size >> 1); } /* - * Main interrupt handler, optimized assuming that we took a 'DATA' - * interrupt. - * - * 1. Clear the interrupt - * 2. Loop while we find valid descriptors and process them; accumulate - * information that can be processed after the loop - * 3. Tell the SGE at which index we stopped processing descriptors - * 4. Bookkeeping; free TX buffers, ring doorbell if there are any - * outstanding TX buffers waiting, replenish RX buffers, potentially - * reenable upper layers if they were turned off due to lack of TX - * resources which are available again. - * 5. If we took an interrupt, but no valid respQ descriptors was found we - * let the slow_intr_handler run and do error handling. + * Called when sufficient space has become available in the SGE command queues + * after the Tx packet schedulers have been suspended to restart the Tx path. */ -irqreturn_t t1_interrupt(int irq, void *cookie, struct pt_regs *regs) +static void restart_tx_queues(struct sge *sge) { - struct net_device *netdev; - struct adapter *adapter = cookie; - struct sge *sge = adapter->sge; - struct respQ *Q = &sge->respQ; - unsigned int credits = Q->credits, flags = 0, ret = 0; - unsigned int tot_rxpayload = 0, tot_txpayload = 0, n_rx = 0, n_tx = 0; - unsigned int credits_pend[SGE_CMDQ_N] = { 0, 0 }; + struct adapter *adap = sge->adapter; - struct respQ_e *e = &Q->entries[Q->cidx]; - prefetch(e); + if (enough_free_Tx_descs(&sge->cmdQ[0])) { + int i; + + for_each_port(adap, i) { + struct net_device *nd = adap->port[i].dev; + + if (test_and_clear_bit(nd->if_port, + &sge->stopped_tx_queues) && + netif_running(nd)) { + sge->stats.cmdQ_restarted[3]++; + netif_wake_queue(nd); + } + } + } +} + +/* + * update_tx_info is called from the interrupt handler/NAPI to return cmdQ0 + * information. + */ +static unsigned int update_tx_info(struct adapter *adapter, + unsigned int flags, + unsigned int pr0) +{ + struct sge *sge = adapter->sge; + struct cmdQ *cmdq = &sge->cmdQ[0]; - t1_write_reg_4(adapter, A_PL_CAUSE, F_PL_INTR_SGE_DATA); + cmdq->processed += pr0; + if (flags & F_CMDQ0_ENABLE) { + clear_bit(CMDQ_STAT_RUNNING, &cmdq->status); + + if (cmdq->cleaned + cmdq->in_use != cmdq->processed && + !test_and_set_bit(CMDQ_STAT_LAST_PKT_DB, &cmdq->status)) { + set_bit(CMDQ_STAT_RUNNING, &cmdq->status); + writel(F_CMDQ0_ENABLE, adapter->regs + A_SG_DOORBELL); + } + flags &= ~F_CMDQ0_ENABLE; + } + + if (unlikely(sge->stopped_tx_queues != 0)) + restart_tx_queues(sge); - while (e->GenerationBit == Q->genbit) { - if (--credits < SGE_RESPQ_REPLENISH_THRES) { - u32 n = Q->entries_n - credits - 1; + return flags; +} - t1_write_reg_4(adapter, A_SG_RSPQUEUECREDIT, n); - credits += n; +/* + * Process SGE responses, up to the supplied budget. Returns the number of + * responses processed. A negative budget is effectively unlimited. + */ +static int process_responses(struct adapter *adapter, int budget) +{ + struct sge *sge = adapter->sge; + struct respQ *q = &sge->respQ; + struct respQ_e *e = &q->entries[q->cidx]; + int budget_left = budget; + unsigned int flags = 0; + unsigned int cmdq_processed[SGE_CMDQ_N] = {0, 0}; + + + while (likely(budget_left && e->GenerationBit == q->genbit)) { + flags |= e->Qsleeping; + + cmdq_processed[0] += e->Cmdq0CreditReturn; + cmdq_processed[1] += e->Cmdq1CreditReturn; + + /* We batch updates to the TX side to avoid cacheline + * ping-pong of TX state information on MP where the sender + * might run on a different CPU than this function... + */ + if (unlikely(flags & F_CMDQ0_ENABLE || cmdq_processed[0] > 64)) { + flags = update_tx_info(adapter, flags, cmdq_processed[0]); + cmdq_processed[0] = 0; + } + if (unlikely(cmdq_processed[1] > 16)) { + sge->cmdQ[1].processed += cmdq_processed[1]; + cmdq_processed[1] = 0; } if (likely(e->DataValid)) { - if (!e->Sop || !e->Eop) + struct freelQ *fl = &sge->freelQ[e->FreelistQid]; + + if (unlikely(!e->Sop || !e->Eop)) BUG(); - t1_sge_rx(sge, &sge->freelQ[e->FreelistQid], - e->BufferLength, e->Offload); - tot_rxpayload += e->BufferLength; - ++n_rx; - } - flags |= e->Qsleeping; - credits_pend[0] += e->Cmdq0CreditReturn; - credits_pend[1] += e->Cmdq1CreditReturn; + if (unlikely(e->Offload)) + unexpected_offload(adapter, fl); + else + sge_rx(sge, fl, e->BufferLength); + + /* + * Note: this depends on each packet consuming a + * single free-list buffer; cf. the BUG above. + */ + if (++fl->cidx == fl->size) + fl->cidx = 0; + if (unlikely(--fl->credits < + fl->size - SGE_FREEL_REFILL_THRESH)) + refill_free_list(sge, fl); + } else + sge->stats.pure_rsps++; -#ifdef CONFIG_SMP - /* - * If enough cmdQ0 buffers have finished DMAing free them so - * anyone that may be waiting for their release can continue. - * We do this only on MP systems to allow other CPUs to proceed - * promptly. UP systems can wait for the free_cmdQ_buffers() - * calls after this loop as the sole CPU is currently busy in - * this loop. - */ - if (unlikely(credits_pend[0] > SGE_FREEL_REFILL_THRESH)) { - free_cmdQ_buffers(sge, &sge->cmdQ[0], credits_pend[0], - &tot_txpayload); - n_tx += credits_pend[0]; - credits_pend[0] = 0; - } -#endif - ret++; e++; - if (unlikely(++Q->cidx == Q->entries_n)) { - Q->cidx = 0; - Q->genbit ^= 1; - e = Q->entries; + if (unlikely(++q->cidx == q->size)) { + q->cidx = 0; + q->genbit ^= 1; + e = q->entries; + } + prefetch(e); + + if (++q->credits > SGE_RESPQ_REPLENISH_THRES) { + writel(q->credits, adapter->regs + A_SG_RSPQUEUECREDIT); + q->credits = 0; } + --budget_left; } - Q->credits = credits; - t1_write_reg_4(adapter, A_SG_SLEEPING, Q->cidx); + flags = update_tx_info(adapter, flags, cmdq_processed[0]); + sge->cmdQ[1].processed += cmdq_processed[1]; - if (credits_pend[0]) - free_cmdQ_buffers(sge, &sge->cmdQ[0], credits_pend[0], &tot_txpayload); - if (credits_pend[1]) - free_cmdQ_buffers(sge, &sge->cmdQ[1], credits_pend[1], &tot_txpayload); + budget -= budget_left; + return budget; +} - /* Do any coalescing and interrupt latency timer adjustments */ - if (adapter->params.sge.coalesce_enable) { - unsigned int avg_txpayload = 0, avg_rxpayload = 0; +/* + * A simpler version of process_responses() that handles only pure (i.e., + * non data-carrying) responses. Such respones are too light-weight to justify + * calling a softirq when using NAPI, so we handle them specially in hard + * interrupt context. The function is called with a pointer to a response, + * which the caller must ensure is a valid pure response. Returns 1 if it + * encounters a valid data-carrying response, 0 otherwise. + */ +static int process_pure_responses(struct adapter *adapter, struct respQ_e *e) +{ + struct sge *sge = adapter->sge; + struct respQ *q = &sge->respQ; + unsigned int flags = 0; + unsigned int cmdq_processed[SGE_CMDQ_N] = {0, 0}; - n_tx += credits_pend[0] + credits_pend[1]; + do { + flags |= e->Qsleeping; - /* - * Choose larger avg. payload size to increase - * throughput and reduce [CPU util., intr/s.] - * - * Throughput behavior favored in mixed-mode. - */ - if (n_tx) - avg_txpayload = tot_txpayload/n_tx; - if (n_rx) - avg_rxpayload = tot_rxpayload/n_rx; - - if (n_tx && avg_txpayload > avg_rxpayload){ - update_intr_timer(sge, avg_txpayload); - } else if (n_rx) { - update_intr_timer(sge, avg_rxpayload); + cmdq_processed[0] += e->Cmdq0CreditReturn; + cmdq_processed[1] += e->Cmdq1CreditReturn; + + e++; + if (unlikely(++q->cidx == q->size)) { + q->cidx = 0; + q->genbit ^= 1; + e = q->entries; } - } - - if (flags & F_CMDQ0_ENABLE) { - struct cmdQ *cmdQ = &sge->cmdQ[0]; + prefetch(e); - atomic_set(&cmdQ->asleep, 1); - if (atomic_read(&cmdQ->pio_pidx) != cmdQ->pidx) { - doorbell_pio(sge, F_CMDQ0_ENABLE); - atomic_set(&cmdQ->pio_pidx, cmdQ->pidx); + if (++q->credits > SGE_RESPQ_REPLENISH_THRES) { + writel(q->credits, adapter->regs + A_SG_RSPQUEUECREDIT); + q->credits = 0; } - } - if (unlikely(flags & (F_FL0_ENABLE | F_FL1_ENABLE))) - freelQs_empty(sge); + sge->stats.pure_rsps++; + } while (e->GenerationBit == q->genbit && !e->DataValid); - netdev = adapter->port[0].dev; - if (unlikely(netif_queue_stopped(netdev) && netif_carrier_ok(netdev) && - enough_free_Tx_descs(sge, 0) && - enough_free_Tx_descs(sge, 1))) { - netif_wake_queue(netdev); - } - if (unlikely(!ret)) - ret = t1_slow_intr_handler(adapter); + flags = update_tx_info(adapter, flags, cmdq_processed[0]); + sge->cmdQ[1].processed += cmdq_processed[1]; - return IRQ_RETVAL(ret != 0); + return e->GenerationBit == q->genbit; } /* - * Enqueues the sk_buff onto the cmdQ[qid] and has hardware fetch it. - * - * The code figures out how many entries the sk_buff will require in the - * cmdQ and updates the cmdQ data structure with the state once the enqueue - * has complete. Then, it doesn't access the global structure anymore, but - * uses the corresponding fields on the stack. In conjuction with a spinlock - * around that code, we can make the function reentrant without holding the - * lock when we actually enqueue (which might be expensive, especially on - * architectures with IO MMUs). + * Handler for new data events when using NAPI. This does not need any locking + * or protection from interrupts as data interrupts are off at this point and + * other adapter interrupts do not interfere. */ -static unsigned int t1_sge_tx(struct sk_buff *skb, struct adapter *adapter, - unsigned int qid) +static int t1_poll(struct net_device *dev, int *budget) { - struct sge *sge = adapter->sge; - struct cmdQ *Q = &sge->cmdQ[qid]; - struct cmdQ_e *e; - struct cmdQ_ce *ce; - dma_addr_t mapping; - unsigned int credits, pidx, genbit; + struct adapter *adapter = dev->priv; + int effective_budget = min(*budget, dev->quota); + + int work_done = process_responses(adapter, effective_budget); + *budget -= work_done; + dev->quota -= work_done; - unsigned int count = 1 + skb_shinfo(skb)->nr_frags; + if (work_done >= effective_budget) + return 1; + + __netif_rx_complete(dev); /* - * Coming from the timer + * Because we don't atomically flush the following write it is + * possible that in very rare cases it can reach the device in a way + * that races with a new response being written plus an error interrupt + * causing the NAPI interrupt handler below to return unhandled status + * to the OS. To protect against this would require flushing the write + * and doing both the write and the flush with interrupts off. Way too + * expensive and unjustifiable given the rarity of the race. */ - if ((skb == sge->pskb)) { - /* - * Quit if any cmdQ activities - */ - if (!spin_trylock(&Q->Qlock)) - return 0; - if (atomic_read(&Q->credits) != Q->entries_n) { - spin_unlock(&Q->Qlock); - return 0; - } - } - else - spin_lock(&Q->Qlock); - - genbit = Q->genbit; - pidx = Q->pidx; - credits = atomic_read(&Q->credits); - - credits -= count; - atomic_sub(count, &Q->credits); - Q->pidx += count; - if (Q->pidx >= Q->entries_n) { - Q->pidx -= Q->entries_n; - Q->genbit ^= 1; - } + writel(adapter->sge->respQ.cidx, adapter->regs + A_SG_SLEEPING); + return 0; +} - if (unlikely(credits < (MAX_SKB_FRAGS + 1))) { - sge->intr_cnt.cmdQ_full[qid]++; - netif_stop_queue(adapter->port[0].dev); - } - spin_unlock(&Q->Qlock); +/* + * Returns true if the device is already scheduled for polling. + */ +static inline int napi_is_scheduled(struct net_device *dev) +{ + return test_bit(__LINK_STATE_RX_SCHED, &dev->state); +} - mapping = pci_map_single(adapter->pdev, skb->data, - skb->len - skb->data_len, PCI_DMA_TODEVICE); - ce = &Q->centries[pidx]; - ce->skb = NULL; - pci_unmap_addr_set(ce, dma_addr, mapping); - pci_unmap_len_set(ce, dma_len, skb->len - skb->data_len); - ce->single = 1; +/* + * NAPI version of the main interrupt handler. + */ +static irqreturn_t t1_interrupt_napi(int irq, void *data, struct pt_regs *regs) +{ + int handled; + struct adapter *adapter = data; + struct sge *sge = adapter->sge; + struct respQ *q = &adapter->sge->respQ; - e = &Q->entries[pidx]; - e->Sop = 1; - e->DataValid = 1; - e->BufferLength = skb->len - skb->data_len; - e->AddrHigh = (u64)mapping >> 32; - e->AddrLow = (u32)mapping; + /* + * Clear the SGE_DATA interrupt first thing. Normally the NAPI + * handler has control of the response queue and the interrupt handler + * can look at the queue reliably only once it knows NAPI is off. + * We can't wait that long to clear the SGE_DATA interrupt because we + * could race with t1_poll rearming the SGE interrupt, so we need to + * clear the interrupt speculatively and really early on. + */ + writel(F_PL_INTR_SGE_DATA, adapter->regs + A_PL_CAUSE); + + spin_lock(&adapter->async_lock); + if (!napi_is_scheduled(sge->netdev)) { + struct respQ_e *e = &q->entries[q->cidx]; + + if (e->GenerationBit == q->genbit) { + if (e->DataValid || + process_pure_responses(adapter, e)) { + if (likely(napi_schedule_prep(sge->netdev))) + __netif_rx_schedule(sge->netdev); + else + printk(KERN_CRIT + "NAPI schedule failure!\n"); + } else + writel(q->cidx, adapter->regs + A_SG_SLEEPING); + handled = 1; + goto unlock; + } else + writel(q->cidx, adapter->regs + A_SG_SLEEPING); + } else + if (readl(adapter->regs + A_PL_CAUSE) & F_PL_INTR_SGE_DATA) + printk(KERN_ERR "data interrupt while NAPI running\n"); + + handled = t1_slow_intr_handler(adapter); + if (!handled) + sge->stats.unhandled_irqs++; + unlock: + spin_unlock(&adapter->async_lock); + return IRQ_RETVAL(handled != 0); +} - if (--count > 0) { - unsigned int i; +/* + * Main interrupt handler, optimized assuming that we took a 'DATA' + * interrupt. + * + * 1. Clear the interrupt + * 2. Loop while we find valid descriptors and process them; accumulate + * information that can be processed after the loop + * 3. Tell the SGE at which index we stopped processing descriptors + * 4. Bookkeeping; free TX buffers, ring doorbell if there are any + * outstanding TX buffers waiting, replenish RX buffers, potentially + * reenable upper layers if they were turned off due to lack of TX + * resources which are available again. + * 5. If we took an interrupt, but no valid respQ descriptors was found we + * let the slow_intr_handler run and do error handling. + */ +static irqreturn_t t1_interrupt(int irq, void *cookie, struct pt_regs *regs) +{ + int work_done; + struct respQ_e *e; + struct adapter *adapter = cookie; + struct respQ *Q = &adapter->sge->respQ; - e->Eop = 0; - wmb(); - e->GenerationBit = e->GenerationBit2 = genbit; + spin_lock(&adapter->async_lock); + e = &Q->entries[Q->cidx]; + prefetch(e); - for (i = 0; i < count; i++) { - skb_frag_t *frag = &skb_shinfo(skb)->frags[i]; + writel(F_PL_INTR_SGE_DATA, adapter->regs + A_PL_CAUSE); - ce++; e++; - if (++pidx == Q->entries_n) { - pidx = 0; - genbit ^= 1; - ce = Q->centries; - e = Q->entries; - } + if (likely(e->GenerationBit == Q->genbit)) + work_done = process_responses(adapter, -1); + else + work_done = t1_slow_intr_handler(adapter); - mapping = pci_map_page(adapter->pdev, frag->page, - frag->page_offset, - frag->size, - PCI_DMA_TODEVICE); - ce->skb = NULL; - pci_unmap_addr_set(ce, dma_addr, mapping); - pci_unmap_len_set(ce, dma_len, frag->size); - ce->single = 0; - - e->Sop = 0; - e->DataValid = 1; - e->BufferLength = frag->size; - e->AddrHigh = (u64)mapping >> 32; - e->AddrLow = (u32)mapping; - - if (i < count - 1) { - e->Eop = 0; - wmb(); - e->GenerationBit = e->GenerationBit2 = genbit; - } + /* + * The unconditional clearing of the PL_CAUSE above may have raced + * with DMA completion and the corresponding generation of a response + * to cause us to miss the resulting data interrupt. The next write + * is also unconditional to recover the missed interrupt and render + * this race harmless. + */ + writel(Q->cidx, adapter->regs + A_SG_SLEEPING); + + if (!work_done) + adapter->sge->stats.unhandled_irqs++; + spin_unlock(&adapter->async_lock); + return IRQ_RETVAL(work_done != 0); +} + +intr_handler_t t1_select_intr_handler(adapter_t *adapter) +{ + return adapter->params.sge.polling ? t1_interrupt_napi : t1_interrupt; +} + +/* + * Enqueues the sk_buff onto the cmdQ[qid] and has hardware fetch it. + * + * The code figures out how many entries the sk_buff will require in the + * cmdQ and updates the cmdQ data structure with the state once the enqueue + * has complete. Then, it doesn't access the global structure anymore, but + * uses the corresponding fields on the stack. In conjuction with a spinlock + * around that code, we can make the function reentrant without holding the + * lock when we actually enqueue (which might be expensive, especially on + * architectures with IO MMUs). + * + * This runs with softirqs disabled. + */ +unsigned int t1_sge_tx(struct sk_buff *skb, struct adapter *adapter, + unsigned int qid, struct net_device *dev) +{ + struct sge *sge = adapter->sge; + struct cmdQ *q = &sge->cmdQ[qid]; + unsigned int credits, pidx, genbit, count; + + spin_lock(&q->lock); + reclaim_completed_tx(sge, q); + + pidx = q->pidx; + credits = q->size - q->in_use; + count = 1 + skb_shinfo(skb)->nr_frags; + + { /* Ethernet packet */ + if (unlikely(credits < count)) { + netif_stop_queue(dev); + set_bit(dev->if_port, &sge->stopped_tx_queues); + sge->stats.cmdQ_full[3]++; + spin_unlock(&q->lock); + CH_ERR("%s: Tx ring full while queue awake!\n", + adapter->name); + return 1; } + if (unlikely(credits - count < q->stop_thres)) { + sge->stats.cmdQ_full[3]++; + netif_stop_queue(dev); + set_bit(dev->if_port, &sge->stopped_tx_queues); + } + } + q->in_use += count; + genbit = q->genbit; + q->pidx += count; + if (q->pidx >= q->size) { + q->pidx -= q->size; + q->genbit ^= 1; } + spin_unlock(&q->lock); - if (skb != sge->pskb) - ce->skb = skb; - e->Eop = 1; - wmb(); - e->GenerationBit = e->GenerationBit2 = genbit; + write_tx_descs(adapter, skb, pidx, genbit, q); /* * We always ring the doorbell for cmdQ1. For cmdQ0, we only ring @@ -1317,50 +1380,50 @@ static unsigned int t1_sge_tx(struct sk_buff *skb, struct adapter *adapter, * then the interrupt handler will detect the outstanding TX packet * and ring the doorbell for us. */ - if (qid) { - doorbell_pio(sge, F_CMDQ1_ENABLE); - } else if (atomic_read(&Q->asleep)) { - atomic_set(&Q->asleep, 0); - doorbell_pio(sge, F_CMDQ0_ENABLE); - atomic_set(&Q->pio_pidx, Q->pidx); + if (qid) + doorbell_pio(adapter, F_CMDQ1_ENABLE); + else { + clear_bit(CMDQ_STAT_LAST_PKT_DB, &q->status); + if (test_and_set_bit(CMDQ_STAT_RUNNING, &q->status) == 0) { + set_bit(CMDQ_STAT_LAST_PKT_DB, &q->status); + writel(F_CMDQ0_ENABLE, adapter->regs + A_SG_DOORBELL); + } } return 0; } #define MK_ETH_TYPE_MSS(type, mss) (((mss) & 0x3FFF) | ((type) << 14)) +/* + * eth_hdr_len - return the length of an Ethernet header + * @data: pointer to the start of the Ethernet header + * + * Returns the length of an Ethernet header, including optional VLAN tag. + */ +static inline int eth_hdr_len(const void *data) +{ + const struct ethhdr *e = data; + + return e->h_proto == htons(ETH_P_8021Q) ? VLAN_ETH_HLEN : ETH_HLEN; +} + /* * Adds the CPL header to the sk_buff and passes it to t1_sge_tx. */ int t1_start_xmit(struct sk_buff *skb, struct net_device *dev) { struct adapter *adapter = dev->priv; + struct sge_port_stats *st = &adapter->sge->port_stats[dev->if_port]; + struct sge *sge = adapter->sge; struct cpl_tx_pkt *cpl; - struct ethhdr *eth; - size_t max_len; - - /* - * We are using a non-standard hard_header_len and some kernel - * components, such as pktgen, do not handle it right. Complain - * when this happens but try to fix things up. - */ - if (unlikely(skb_headroom(skb) < dev->hard_header_len - ETH_HLEN)) { - struct sk_buff *orig_skb = skb; - - if (net_ratelimit()) - printk(KERN_ERR - "%s: Tx packet has inadequate headroom\n", - dev->name); - skb = skb_realloc_headroom(skb, sizeof(struct cpl_tx_pkt_lso)); - dev_kfree_skb_any(orig_skb); - if (!skb) - return -ENOMEM; - } +#ifdef NETIF_F_TSO if (skb_shinfo(skb)->tso_size) { int eth_type; struct cpl_tx_pkt_lso *hdr; + st->tso++; + eth_type = skb->nh.raw - skb->data == ETH_HLEN ? CPL_ETH_II : CPL_ETH_II_VLAN; @@ -1373,40 +1436,72 @@ int t1_start_xmit(struct sk_buff *skb, struct net_device *dev) skb_shinfo(skb)->tso_size)); hdr->len = htonl(skb->len - sizeof(*hdr)); cpl = (struct cpl_tx_pkt *)hdr; + sge->stats.tx_lso_pkts++; } else +#endif { /* - * An Ethernet packet must have at least space for - * the DIX Ethernet header and be no greater than - * the device set MTU. Otherwise trash the packet. + * Packets shorter than ETH_HLEN can break the MAC, drop them + * early. Also, we may get oversized packets because some + * parts of the kernel don't handle our unusual hard_header_len + * right, drop those too. */ - if (skb->len < ETH_HLEN) - goto t1_start_xmit_fail2; - eth = (struct ethhdr *)skb->data; - if (eth->h_proto == htons(ETH_P_8021Q)) - max_len = dev->mtu + VLAN_ETH_HLEN; - else - max_len = dev->mtu + ETH_HLEN; - if (skb->len > max_len) - goto t1_start_xmit_fail2; + if (unlikely(skb->len < ETH_HLEN || + skb->len > dev->mtu + eth_hdr_len(skb->data))) { + dev_kfree_skb_any(skb); + return NET_XMIT_SUCCESS; + } + + /* + * We are using a non-standard hard_header_len and some kernel + * components, such as pktgen, do not handle it right. + * Complain when this happens but try to fix things up. + */ + if (unlikely(skb_headroom(skb) < + dev->hard_header_len - ETH_HLEN)) { + struct sk_buff *orig_skb = skb; + + if (net_ratelimit()) + printk(KERN_ERR "%s: inadequate headroom in " + "Tx packet\n", dev->name); + skb = skb_realloc_headroom(skb, sizeof(*cpl)); + dev_kfree_skb_any(orig_skb); + if (!skb) + return -ENOMEM; + } if (!(adapter->flags & UDP_CSUM_CAPABLE) && skb->ip_summed == CHECKSUM_HW && - skb->nh.iph->protocol == IPPROTO_UDP && - skb_checksum_help(skb, 0)) - goto t1_start_xmit_fail3; - + skb->nh.iph->protocol == IPPROTO_UDP) + if (unlikely(skb_checksum_help(skb, 0))) { + dev_kfree_skb_any(skb); + return -ENOMEM; + } - if (!adapter->sge->pskb) { + /* Hmmm, assuming to catch the gratious arp... and we'll use + * it to flush out stuck espi packets... + */ + if (unlikely(!adapter->sge->espibug_skb)) { if (skb->protocol == htons(ETH_P_ARP) && - skb->nh.arph->ar_op == htons(ARPOP_REQUEST)) - adapter->sge->pskb = skb; + skb->nh.arph->ar_op == htons(ARPOP_REQUEST)) { + adapter->sge->espibug_skb = skb; + /* We want to re-use this skb later. We + * simply bump the reference count and it + * will not be freed... + */ + skb = skb_get(skb); + } } - cpl = (struct cpl_tx_pkt *)skb_push(skb, sizeof(*cpl)); + + cpl = (struct cpl_tx_pkt *)__skb_push(skb, sizeof(*cpl)); cpl->opcode = CPL_TX_PKT; cpl->ip_csum_dis = 1; /* SW calculates IP csum */ cpl->l4_csum_dis = skb->ip_summed == CHECKSUM_HW ? 0 : 1; /* the length field isn't used so don't bother setting it */ + + st->tx_cso += (skb->ip_summed == CHECKSUM_HW); + sge->stats.tx_do_cksum += (skb->ip_summed == CHECKSUM_HW); + sge->stats.tx_reg_pkts++; } cpl->iff = dev->if_port; @@ -1414,38 +1509,176 @@ int t1_start_xmit(struct sk_buff *skb, struct net_device *dev) if (adapter->vlan_grp && vlan_tx_tag_present(skb)) { cpl->vlan_valid = 1; cpl->vlan = htons(vlan_tx_tag_get(skb)); + st->vlan_insert++; } else #endif cpl->vlan_valid = 0; dev->trans_start = jiffies; - return t1_sge_tx(skb, adapter, 0); + return t1_sge_tx(skb, adapter, 0, dev); +} -t1_start_xmit_fail3: - printk(KERN_INFO "%s: Unable to complete checksum\n", dev->name); - goto t1_start_xmit_fail1; +/* + * Callback for the Tx buffer reclaim timer. Runs with softirqs disabled. + */ +static void sge_tx_reclaim_cb(unsigned long data) +{ + int i; + struct sge *sge = (struct sge *)data; + + for (i = 0; i < SGE_CMDQ_N; ++i) { + struct cmdQ *q = &sge->cmdQ[i]; + + if (!spin_trylock(&q->lock)) + continue; -t1_start_xmit_fail2: - printk(KERN_INFO "%s: Invalid packet length %d, dropping\n", - dev->name, skb->len); + reclaim_completed_tx(sge, q); + if (i == 0 && q->in_use) /* flush pending credits */ + writel(F_CMDQ0_ENABLE, + sge->adapter->regs + A_SG_DOORBELL); -t1_start_xmit_fail1: - dev_kfree_skb_any(skb); + spin_unlock(&q->lock); + } + mod_timer(&sge->tx_reclaim_timer, jiffies + TX_RECLAIM_PERIOD); +} + +/* + * Propagate changes of the SGE coalescing parameters to the HW. + */ +int t1_sge_set_coalesce_params(struct sge *sge, struct sge_params *p) +{ + sge->netdev->poll = t1_poll; + sge->fixed_intrtimer = p->rx_coalesce_usecs * + core_ticks_per_usec(sge->adapter); + writel(sge->fixed_intrtimer, sge->adapter->regs + A_SG_INTRTIMER); return 0; } -void t1_sge_set_ptimeout(adapter_t *adapter, u32 val) +/* + * Allocates both RX and TX resources and configures the SGE. However, + * the hardware is not enabled yet. + */ +int t1_sge_configure(struct sge *sge, struct sge_params *p) { - struct sge *sge = adapter->sge; + if (alloc_rx_resources(sge, p)) + return -ENOMEM; + if (alloc_tx_resources(sge, p)) { + free_rx_resources(sge); + return -ENOMEM; + } + configure_sge(sge, p); + + /* + * Now that we have sized the free lists calculate the payload + * capacity of the large buffers. Other parts of the driver use + * this to set the max offload coalescing size so that RX packets + * do not overflow our large buffers. + */ + p->large_buf_capacity = jumbo_payload_capacity(sge); + return 0; +} - if (is_T2(adapter)) - sge->ptimeout = max((u32)((HZ * val) / 1000), (u32)1); +/* + * Disables the DMA engine. + */ +void t1_sge_stop(struct sge *sge) +{ + writel(0, sge->adapter->regs + A_SG_CONTROL); + (void) readl(sge->adapter->regs + A_SG_CONTROL); /* flush */ + if (is_T2(sge->adapter)) + del_timer_sync(&sge->espibug_timer); + del_timer_sync(&sge->tx_reclaim_timer); } -u32 t1_sge_get_ptimeout(adapter_t *adapter) +/* + * Enables the DMA engine. + */ +void t1_sge_start(struct sge *sge) { + refill_free_list(sge, &sge->freelQ[0]); + refill_free_list(sge, &sge->freelQ[1]); + + writel(sge->sge_control, sge->adapter->regs + A_SG_CONTROL); + doorbell_pio(sge->adapter, F_FL0_ENABLE | F_FL1_ENABLE); + (void) readl(sge->adapter->regs + A_SG_CONTROL); /* flush */ + + mod_timer(&sge->tx_reclaim_timer, jiffies + TX_RECLAIM_PERIOD); + + if (is_T2(sge->adapter)) + mod_timer(&sge->espibug_timer, jiffies + sge->espibug_timeout); +} + +/* + * Callback for the T2 ESPI 'stuck packet feature' workaorund + */ +static void espibug_workaround(void *data) +{ + struct adapter *adapter = (struct adapter *)data; struct sge *sge = adapter->sge; - return (is_T2(adapter) ? ((sge->ptimeout * 1000) / HZ) : 0); + if (netif_running(adapter->port[0].dev)) { + struct sk_buff *skb = sge->espibug_skb; + + u32 seop = t1_espi_get_mon(adapter, 0x930, 0); + + if ((seop & 0xfff0fff) == 0xfff && skb) { + if (!skb->cb[0]) { + u8 ch_mac_addr[ETH_ALEN] = + {0x0, 0x7, 0x43, 0x0, 0x0, 0x0}; + memcpy(skb->data + sizeof(struct cpl_tx_pkt), + ch_mac_addr, ETH_ALEN); + memcpy(skb->data + skb->len - 10, ch_mac_addr, + ETH_ALEN); + skb->cb[0] = 0xff; + } + + /* bump the reference count to avoid freeing of the + * skb once the DMA has completed. + */ + skb = skb_get(skb); + t1_sge_tx(skb, adapter, 0, adapter->port[0].dev); + } + } + mod_timer(&sge->espibug_timer, jiffies + sge->espibug_timeout); } +/* + * Creates a t1_sge structure and returns suggested resource parameters. + */ +struct sge * __devinit t1_sge_create(struct adapter *adapter, + struct sge_params *p) +{ + struct sge *sge = kmalloc(sizeof(*sge), GFP_KERNEL); + + if (!sge) + return NULL; + memset(sge, 0, sizeof(*sge)); + + sge->adapter = adapter; + sge->netdev = adapter->port[0].dev; + sge->rx_pkt_pad = t1_is_T1B(adapter) ? 0 : 2; + sge->jumbo_fl = t1_is_T1B(adapter) ? 1 : 0; + + init_timer(&sge->tx_reclaim_timer); + sge->tx_reclaim_timer.data = (unsigned long)sge; + sge->tx_reclaim_timer.function = sge_tx_reclaim_cb; + + if (is_T2(sge->adapter)) { + init_timer(&sge->espibug_timer); + sge->espibug_timer.function = (void *)&espibug_workaround; + sge->espibug_timer.data = (unsigned long)sge->adapter; + sge->espibug_timeout = 1; + } + + + p->cmdQ_size[0] = SGE_CMDQ0_E_N; + p->cmdQ_size[1] = SGE_CMDQ1_E_N; + p->freelQ_size[!sge->jumbo_fl] = SGE_FREEL_SIZE; + p->freelQ_size[sge->jumbo_fl] = SGE_JUMBO_FREEL_SIZE; + p->rx_coalesce_usecs = 50; + p->coalesce_enable = 0; + p->sample_interval_usecs = 0; + p->polling = 0; + + return sge; +} diff --git a/drivers/net/chelsio/sge.h b/drivers/net/chelsio/sge.h index 140f896def6..434b2558685 100644 --- a/drivers/net/chelsio/sge.h +++ b/drivers/net/chelsio/sge.h @@ -1,8 +1,8 @@ /***************************************************************************** * * * File: sge.h * - * $Revision: 1.7 $ * - * $Date: 2005/03/23 07:15:59 $ * + * $Revision: 1.11 $ * + * $Date: 2005/06/21 22:10:55 $ * * Description: * * part of the Chelsio 10Gb Ethernet Driver. * * * @@ -36,25 +36,50 @@ * * ****************************************************************************/ -#ifndef _CHELSIO_LINUX_SGE_H_ -#define _CHELSIO_LINUX_SGE_H_ +#ifndef _CXGB_SGE_H_ +#define _CXGB_SGE_H_ #include #include #include +#ifndef IRQ_RETVAL +#define IRQ_RETVAL(x) +typedef void irqreturn_t; +#endif + +typedef irqreturn_t (*intr_handler_t)(int, void *, struct pt_regs *); + struct sge_intr_counts { unsigned int respQ_empty; /* # times respQ empty */ unsigned int respQ_overflow; /* # respQ overflow (fatal) */ unsigned int freelistQ_empty; /* # times freelist empty */ unsigned int pkt_too_big; /* packet too large (fatal) */ unsigned int pkt_mismatch; - unsigned int cmdQ_full[2]; /* not HW interrupt, host cmdQ[] full */ + unsigned int cmdQ_full[3]; /* not HW IRQ, host cmdQ[] full */ + unsigned int cmdQ_restarted[3];/* # of times cmdQ X was restarted */ + unsigned int ethernet_pkts; /* # of Ethernet packets received */ + unsigned int offload_pkts; /* # of offload packets received */ + unsigned int offload_bundles; /* # of offload pkt bundles delivered */ + unsigned int pure_rsps; /* # of non-payload responses */ + unsigned int unhandled_irqs; /* # of unhandled interrupts */ + unsigned int tx_ipfrags; + unsigned int tx_reg_pkts; + unsigned int tx_lso_pkts; + unsigned int tx_do_cksum; +}; + +struct sge_port_stats { + unsigned long rx_cso_good; /* # of successful RX csum offloads */ + unsigned long tx_cso; /* # of TX checksum offloads */ + unsigned long vlan_xtract; /* # of VLAN tag extractions */ + unsigned long vlan_insert; /* # of VLAN tag extractions */ + unsigned long tso; /* # of TSO requests */ + unsigned long rx_drops; /* # of packets dropped due to no mem */ }; struct sk_buff; struct net_device; -struct cxgbdev; struct adapter; struct sge_params; struct sge; @@ -63,7 +88,9 @@ struct sge *t1_sge_create(struct adapter *, struct sge_params *); int t1_sge_configure(struct sge *, struct sge_params *); int t1_sge_set_coalesce_params(struct sge *, struct sge_params *); void t1_sge_destroy(struct sge *); -irqreturn_t t1_interrupt(int, void *, struct pt_regs *); +intr_handler_t t1_select_intr_handler(adapter_t *adapter); +unsigned int t1_sge_tx(struct sk_buff *skb, struct adapter *adapter, + unsigned int qid, struct net_device *netdev); int t1_start_xmit(struct sk_buff *skb, struct net_device *dev); void t1_set_vlan_accel(struct adapter *adapter, int on_off); void t1_sge_start(struct sge *); @@ -72,8 +99,7 @@ int t1_sge_intr_error_handler(struct sge *); void t1_sge_intr_enable(struct sge *); void t1_sge_intr_disable(struct sge *); void t1_sge_intr_clear(struct sge *); +const struct sge_intr_counts *t1_sge_get_intr_counts(struct sge *sge); +const struct sge_port_stats *t1_sge_get_port_stats(struct sge *sge, int port); -void t1_sge_set_ptimeout(adapter_t *adapter, u32 val); -u32 t1_sge_get_ptimeout(adapter_t *adapter); - -#endif /* _CHELSIO_LINUX_SGE_H_ */ +#endif /* _CXGB_SGE_H_ */ diff --git a/drivers/net/chelsio/subr.c b/drivers/net/chelsio/subr.c index a90a3f95fca..1ebb5d149ae 100644 --- a/drivers/net/chelsio/subr.c +++ b/drivers/net/chelsio/subr.c @@ -1,8 +1,8 @@ /***************************************************************************** * * * File: subr.c * - * $Revision: 1.12 $ * - * $Date: 2005/03/23 07:41:27 $ * + * $Revision: 1.27 $ * + * $Date: 2005/06/22 01:08:36 $ * * Description: * * Various subroutines (intr,pio,etc.) used by Chelsio 10G Ethernet driver. * * part of the Chelsio 10Gb Ethernet Driver. * @@ -40,11 +40,9 @@ #include "common.h" #include "elmer0.h" #include "regs.h" - #include "gmac.h" #include "cphy.h" #include "sge.h" -#include "tp.h" #include "espi.h" /** @@ -64,7 +62,7 @@ static int t1_wait_op_done(adapter_t *adapter, int reg, u32 mask, int polarity, int attempts, int delay) { while (1) { - u32 val = t1_read_reg_4(adapter, reg) & mask; + u32 val = readl(adapter->regs + reg) & mask; if (!!val == polarity) return 0; @@ -84,9 +82,9 @@ static int __t1_tpi_write(adapter_t *adapter, u32 addr, u32 value) { int tpi_busy; - t1_write_reg_4(adapter, A_TPI_ADDR, addr); - t1_write_reg_4(adapter, A_TPI_WR_DATA, value); - t1_write_reg_4(adapter, A_TPI_CSR, F_TPIWR); + writel(addr, adapter->regs + A_TPI_ADDR); + writel(value, adapter->regs + A_TPI_WR_DATA); + writel(F_TPIWR, adapter->regs + A_TPI_CSR); tpi_busy = t1_wait_op_done(adapter, A_TPI_CSR, F_TPIRDY, 1, TPI_ATTEMPTS, 3); @@ -100,9 +98,9 @@ int t1_tpi_write(adapter_t *adapter, u32 addr, u32 value) { int ret; - TPI_LOCK(adapter); + spin_lock(&(adapter)->tpi_lock); ret = __t1_tpi_write(adapter, addr, value); - TPI_UNLOCK(adapter); + spin_unlock(&(adapter)->tpi_lock); return ret; } @@ -113,8 +111,8 @@ static int __t1_tpi_read(adapter_t *adapter, u32 addr, u32 *valp) { int tpi_busy; - t1_write_reg_4(adapter, A_TPI_ADDR, addr); - t1_write_reg_4(adapter, A_TPI_CSR, 0); + writel(addr, adapter->regs + A_TPI_ADDR); + writel(0, adapter->regs + A_TPI_CSR); tpi_busy = t1_wait_op_done(adapter, A_TPI_CSR, F_TPIRDY, 1, TPI_ATTEMPTS, 3); @@ -122,7 +120,7 @@ static int __t1_tpi_read(adapter_t *adapter, u32 addr, u32 *valp) CH_ALERT("%s: TPI read from 0x%x failed\n", adapter->name, addr); else - *valp = t1_read_reg_4(adapter, A_TPI_RD_DATA); + *valp = readl(adapter->regs + A_TPI_RD_DATA); return tpi_busy; } @@ -130,20 +128,12 @@ int t1_tpi_read(adapter_t *adapter, u32 addr, u32 *valp) { int ret; - TPI_LOCK(adapter); + spin_lock(&(adapter)->tpi_lock); ret = __t1_tpi_read(adapter, addr, valp); - TPI_UNLOCK(adapter); + spin_unlock(&(adapter)->tpi_lock); return ret; } -/* - * Set a TPI parameter. - */ -static void t1_tpi_par(adapter_t *adapter, u32 value) -{ - t1_write_reg_4(adapter, A_TPI_PAR, V_TPIPAR(value)); -} - /* * Called when a port's link settings change to propagate the new values to the * associated PHY and MAC. After performing the common tasks it invokes an @@ -227,7 +217,7 @@ static int mi1_mdio_ext_read(adapter_t *adapter, int phy_addr, int mmd_addr, { u32 addr = V_MI1_REG_ADDR(mmd_addr) | V_MI1_PHY_ADDR(phy_addr); - TPI_LOCK(adapter); + spin_lock(&(adapter)->tpi_lock); /* Write the address we want. */ __t1_tpi_write(adapter, A_ELMER0_PORT0_MI1_ADDR, addr); @@ -242,7 +232,7 @@ static int mi1_mdio_ext_read(adapter_t *adapter, int phy_addr, int mmd_addr, /* Read the data. */ __t1_tpi_read(adapter, A_ELMER0_PORT0_MI1_DATA, valp); - TPI_UNLOCK(adapter); + spin_unlock(&(adapter)->tpi_lock); return 0; } @@ -251,7 +241,7 @@ static int mi1_mdio_ext_write(adapter_t *adapter, int phy_addr, int mmd_addr, { u32 addr = V_MI1_REG_ADDR(mmd_addr) | V_MI1_PHY_ADDR(phy_addr); - TPI_LOCK(adapter); + spin_lock(&(adapter)->tpi_lock); /* Write the address we want. */ __t1_tpi_write(adapter, A_ELMER0_PORT0_MI1_ADDR, addr); @@ -264,7 +254,7 @@ static int mi1_mdio_ext_write(adapter_t *adapter, int phy_addr, int mmd_addr, __t1_tpi_write(adapter, A_ELMER0_PORT0_MI1_DATA, val); __t1_tpi_write(adapter, A_ELMER0_PORT0_MI1_OP, MI1_OP_INDIRECT_WRITE); mi1_wait_until_ready(adapter, A_ELMER0_PORT0_MI1_OP); - TPI_UNLOCK(adapter); + spin_unlock(&(adapter)->tpi_lock); return 0; } @@ -277,7 +267,6 @@ static struct mdio_ops mi1_mdio_ext_ops = { enum { CH_BRD_N110_1F, CH_BRD_N210_1F, - CH_BRD_T210_1F, }; static struct board_info t1_board[] = { @@ -308,13 +297,15 @@ struct pci_device_id t1_pci_tbl[] = { { 0, } }; +MODULE_DEVICE_TABLE(pci, t1_pci_tbl); + /* * Return the board_info structure with a given index. Out-of-range indices * return NULL. */ const struct board_info *t1_get_board_info(unsigned int board_id) { - return board_id < DIMOF(t1_board) ? &t1_board[board_id] : NULL; + return board_id < ARRAY_SIZE(t1_board) ? &t1_board[board_id] : NULL; } struct chelsio_vpd_t { @@ -436,7 +427,6 @@ int elmer0_ext_intr_handler(adapter_t *adapter) t1_tpi_read(adapter, A_ELMER0_INT_CAUSE, &cause); switch (board_info(adapter)->board) { - case CHBT_BOARD_CHT210: case CHBT_BOARD_N210: case CHBT_BOARD_N110: if (cause & ELMER0_GP_BIT6) { /* Marvell 88x2010 interrupt */ @@ -446,23 +436,6 @@ int elmer0_ext_intr_handler(adapter_t *adapter) link_changed(adapter, 0); } break; - case CHBT_BOARD_8000: - case CHBT_BOARD_CHT110: - CH_DBG(adapter, INTR, "External interrupt cause 0x%x\n", - cause); - if (cause & ELMER0_GP_BIT1) { /* PMC3393 INTB */ - struct cmac *mac = adapter->port[0].mac; - - mac->ops->interrupt_handler(mac); - } - if (cause & ELMER0_GP_BIT5) { /* XPAK MOD_DETECT */ - u32 mod_detect; - - t1_tpi_read(adapter, A_ELMER0_GPI_STAT, &mod_detect); - CH_MSG(adapter, INFO, LINK, "XPAK %s\n", - mod_detect ? "removed" : "inserted"); - } - break; } t1_tpi_write(adapter, A_ELMER0_INT_CAUSE, cause); return 0; @@ -472,11 +445,11 @@ int elmer0_ext_intr_handler(adapter_t *adapter) void t1_interrupts_enable(adapter_t *adapter) { unsigned int i; + u32 pl_intr; - adapter->slow_intr_mask = F_PL_INTR_SGE_ERR | F_PL_INTR_TP; + adapter->slow_intr_mask = F_PL_INTR_SGE_ERR; t1_sge_intr_enable(adapter->sge); - t1_tp_intr_enable(adapter->tp); if (adapter->espi) { adapter->slow_intr_mask |= F_PL_INTR_ESPI; t1_espi_intr_enable(adapter->espi); @@ -489,17 +462,15 @@ void t1_interrupts_enable(adapter_t *adapter) } /* Enable PCIX & external chip interrupts on ASIC boards. */ - if (t1_is_asic(adapter)) { - u32 pl_intr = t1_read_reg_4(adapter, A_PL_ENABLE); + pl_intr = readl(adapter->regs + A_PL_ENABLE); - /* PCI-X interrupts */ - pci_write_config_dword(adapter->pdev, A_PCICFG_INTR_ENABLE, - 0xffffffff); + /* PCI-X interrupts */ + pci_write_config_dword(adapter->pdev, A_PCICFG_INTR_ENABLE, + 0xffffffff); - adapter->slow_intr_mask |= F_PL_INTR_EXT | F_PL_INTR_PCIX; - pl_intr |= F_PL_INTR_EXT | F_PL_INTR_PCIX; - t1_write_reg_4(adapter, A_PL_ENABLE, pl_intr); - } + adapter->slow_intr_mask |= F_PL_INTR_EXT | F_PL_INTR_PCIX; + pl_intr |= F_PL_INTR_EXT | F_PL_INTR_PCIX; + writel(pl_intr, adapter->regs + A_PL_ENABLE); } /* Disables all interrupts. */ @@ -508,7 +479,6 @@ void t1_interrupts_disable(adapter_t* adapter) unsigned int i; t1_sge_intr_disable(adapter->sge); - t1_tp_intr_disable(adapter->tp); if (adapter->espi) t1_espi_intr_disable(adapter->espi); @@ -519,8 +489,7 @@ void t1_interrupts_disable(adapter_t* adapter) } /* Disable PCIX & external chip interrupts. */ - if (t1_is_asic(adapter)) - t1_write_reg_4(adapter, A_PL_ENABLE, 0); + writel(0, adapter->regs + A_PL_ENABLE); /* PCI-X interrupts */ pci_write_config_dword(adapter->pdev, A_PCICFG_INTR_ENABLE, 0); @@ -532,9 +501,10 @@ void t1_interrupts_disable(adapter_t* adapter) void t1_interrupts_clear(adapter_t* adapter) { unsigned int i; + u32 pl_intr; + t1_sge_intr_clear(adapter->sge); - t1_tp_intr_clear(adapter->tp); if (adapter->espi) t1_espi_intr_clear(adapter->espi); @@ -545,12 +515,10 @@ void t1_interrupts_clear(adapter_t* adapter) } /* Enable interrupts for external devices. */ - if (t1_is_asic(adapter)) { - u32 pl_intr = t1_read_reg_4(adapter, A_PL_CAUSE); + pl_intr = readl(adapter->regs + A_PL_CAUSE); - t1_write_reg_4(adapter, A_PL_CAUSE, - pl_intr | F_PL_INTR_EXT | F_PL_INTR_PCIX); - } + writel(pl_intr | F_PL_INTR_EXT | F_PL_INTR_PCIX, + adapter->regs + A_PL_CAUSE); /* PCI-X interrupts */ pci_write_config_dword(adapter->pdev, A_PCICFG_INTR_CAUSE, 0xffffffff); @@ -559,17 +527,15 @@ void t1_interrupts_clear(adapter_t* adapter) /* * Slow path interrupt handler for ASICs. */ -static int asic_slow_intr(adapter_t *adapter) +int t1_slow_intr_handler(adapter_t *adapter) { - u32 cause = t1_read_reg_4(adapter, A_PL_CAUSE); + u32 cause = readl(adapter->regs + A_PL_CAUSE); cause &= adapter->slow_intr_mask; if (!cause) return 0; if (cause & F_PL_INTR_SGE_ERR) t1_sge_intr_error_handler(adapter->sge); - if (cause & F_PL_INTR_TP) - t1_tp_intr_handler(adapter->tp); if (cause & F_PL_INTR_ESPI) t1_espi_intr_handler(adapter->espi); if (cause & F_PL_INTR_PCIX) @@ -578,41 +544,82 @@ static int asic_slow_intr(adapter_t *adapter) t1_elmer0_ext_intr(adapter); /* Clear the interrupts just processed. */ - t1_write_reg_4(adapter, A_PL_CAUSE, cause); - (void)t1_read_reg_4(adapter, A_PL_CAUSE); /* flush writes */ + writel(cause, adapter->regs + A_PL_CAUSE); + (void)readl(adapter->regs + A_PL_CAUSE); /* flush writes */ return 1; } -int t1_slow_intr_handler(adapter_t *adapter) +/* Pause deadlock avoidance parameters */ +#define DROP_MSEC 16 +#define DROP_PKTS_CNT 1 + +static void set_csum_offload(adapter_t *adapter, u32 csum_bit, int enable) +{ + u32 val = readl(adapter->regs + A_TP_GLOBAL_CONFIG); + + if (enable) + val |= csum_bit; + else + val &= ~csum_bit; + writel(val, adapter->regs + A_TP_GLOBAL_CONFIG); +} + +void t1_tp_set_ip_checksum_offload(adapter_t *adapter, int enable) { - return asic_slow_intr(adapter); + set_csum_offload(adapter, F_IP_CSUM, enable); } -/* Power sequencing is a work-around for Intel's XPAKs. */ -static void power_sequence_xpak(adapter_t* adapter) +void t1_tp_set_udp_checksum_offload(adapter_t *adapter, int enable) { - u32 mod_detect; - u32 gpo; + set_csum_offload(adapter, F_UDP_CSUM, enable); +} - /* Check for XPAK */ - t1_tpi_read(adapter, A_ELMER0_GPI_STAT, &mod_detect); - if (!(ELMER0_GP_BIT5 & mod_detect)) { - /* XPAK is present */ - t1_tpi_read(adapter, A_ELMER0_GPO, &gpo); - gpo |= ELMER0_GP_BIT18; - t1_tpi_write(adapter, A_ELMER0_GPO, gpo); +void t1_tp_set_tcp_checksum_offload(adapter_t *adapter, int enable) +{ + set_csum_offload(adapter, F_TCP_CSUM, enable); +} + +static void t1_tp_reset(adapter_t *adapter, unsigned int tp_clk) +{ + u32 val; + + val = F_TP_IN_CSPI_CPL | F_TP_IN_CSPI_CHECK_IP_CSUM | + F_TP_IN_CSPI_CHECK_TCP_CSUM | F_TP_IN_ESPI_ETHERNET; + val |= F_TP_IN_ESPI_CHECK_IP_CSUM | + F_TP_IN_ESPI_CHECK_TCP_CSUM; + writel(val, adapter->regs + A_TP_IN_CONFIG); + writel(F_TP_OUT_CSPI_CPL | + F_TP_OUT_ESPI_ETHERNET | + F_TP_OUT_ESPI_GENERATE_IP_CSUM | + F_TP_OUT_ESPI_GENERATE_TCP_CSUM, + adapter->regs + A_TP_OUT_CONFIG); + + val = readl(adapter->regs + A_TP_GLOBAL_CONFIG); + val &= ~(F_IP_CSUM | F_UDP_CSUM | F_TCP_CSUM); + writel(val, adapter->regs + A_TP_GLOBAL_CONFIG); + + /* + * Enable pause frame deadlock prevention. + */ + if (is_T2(adapter)) { + u32 drop_ticks = DROP_MSEC * (tp_clk / 1000); + + writel(F_ENABLE_TX_DROP | F_ENABLE_TX_ERROR | + V_DROP_TICKS_CNT(drop_ticks) | + V_NUM_PKTS_DROPPED(DROP_PKTS_CNT), + adapter->regs + A_TP_TX_DROP_CONFIG); } + + writel(F_TP_RESET, adapter->regs + A_TP_RESET); } int __devinit t1_get_board_rev(adapter_t *adapter, const struct board_info *bi, struct adapter_params *p) { p->chip_version = bi->chip_term; - p->is_asic = (p->chip_version != CHBT_TERM_FPGA); if (p->chip_version == CHBT_TERM_T1 || - p->chip_version == CHBT_TERM_T2 || - p->chip_version == CHBT_TERM_FPGA) { - u32 val = t1_read_reg_4(adapter, A_TP_PC_CONFIG); + p->chip_version == CHBT_TERM_T2) { + u32 val = readl(adapter->regs + A_TP_PC_CONFIG); val = G_TP_PC_REV(val); if (val == 2) @@ -633,23 +640,11 @@ int __devinit t1_get_board_rev(adapter_t *adapter, const struct board_info *bi, static int board_init(adapter_t *adapter, const struct board_info *bi) { switch (bi->board) { - case CHBT_BOARD_8000: case CHBT_BOARD_N110: case CHBT_BOARD_N210: - case CHBT_BOARD_CHT210: - case CHBT_BOARD_COUGAR: - t1_tpi_par(adapter, 0xf); + writel(V_TPIPAR(0xf), adapter->regs + A_TPI_PAR); t1_tpi_write(adapter, A_ELMER0_GPO, 0x800); break; - case CHBT_BOARD_CHT110: - t1_tpi_par(adapter, 0xf); - t1_tpi_write(adapter, A_ELMER0_GPO, 0x1800); - - /* TBD XXX Might not need. This fixes a problem - * described in the Intel SR XPAK errata. - */ - power_sequence_xpak(adapter); - break; } return 0; } @@ -663,20 +658,19 @@ int t1_init_hw_modules(adapter_t *adapter) int err = -EIO; const struct board_info *bi = board_info(adapter); - if (!adapter->mc4) { - u32 val = t1_read_reg_4(adapter, A_MC4_CFG); + if (!bi->clock_mc4) { + u32 val = readl(adapter->regs + A_MC4_CFG); - t1_write_reg_4(adapter, A_MC4_CFG, val | F_READY | F_MC4_SLOW); - t1_write_reg_4(adapter, A_MC5_CONFIG, - F_M_BUS_ENABLE | F_TCAM_RESET); + writel(val | F_READY | F_MC4_SLOW, adapter->regs + A_MC4_CFG); + writel(F_M_BUS_ENABLE | F_TCAM_RESET, + adapter->regs + A_MC5_CONFIG); } if (adapter->espi && t1_espi_init(adapter->espi, bi->chip_mac, bi->espi_nports)) goto out_err; - if (t1_tp_reset(adapter->tp, &adapter->params.tp, bi->clock_core)) - goto out_err; + t1_tp_reset(adapter, bi->clock_core); err = t1_sge_configure(adapter->sge, &adapter->params.sge); if (err) @@ -690,7 +684,7 @@ int t1_init_hw_modules(adapter_t *adapter) /* * Determine a card's PCI mode. */ -static void __devinit get_pci_mode(adapter_t *adapter, struct pci_params *p) +static void __devinit get_pci_mode(adapter_t *adapter, struct chelsio_pci_params *p) { static unsigned short speed_map[] = { 33, 66, 100, 133 }; u32 pci_mode; @@ -720,8 +714,6 @@ void t1_free_sw_modules(adapter_t *adapter) if (adapter->sge) t1_sge_destroy(adapter->sge); - if (adapter->tp) - t1_tp_destroy(adapter->tp); if (adapter->espi) t1_espi_destroy(adapter->espi); } @@ -764,21 +756,12 @@ int __devinit t1_init_sw_modules(adapter_t *adapter, goto error; } - - if (bi->espi_nports && !(adapter->espi = t1_espi_create(adapter))) { CH_ERR("%s: ESPI initialization failed\n", adapter->name); goto error; } - adapter->tp = t1_tp_create(adapter, &adapter->params.tp); - if (!adapter->tp) { - CH_ERR("%s: TP initialization failed\n", - adapter->name); - goto error; - } - board_init(adapter, bi); bi->mdio_ops->init(adapter, bi); if (bi->gphy->reset) @@ -810,14 +793,12 @@ int __devinit t1_init_sw_modules(adapter_t *adapter, * Get the port's MAC addresses either from the EEPROM if one * exists or the one hardcoded in the MAC. */ - if (!t1_is_asic(adapter) || bi->chip_mac == CHBT_MAC_DUMMY) - mac->ops->macaddress_get(mac, hw_addr); - else if (vpd_macaddress_get(adapter, i, hw_addr)) { + if (vpd_macaddress_get(adapter, i, hw_addr)) { CH_ERR("%s: could not read MAC address from VPD ROM\n", - port_name(adapter, i)); + adapter->port[i].dev->name); goto error; } - t1_set_hw_addr(adapter, i, hw_addr); + memcpy(adapter->port[i].dev->dev_addr, hw_addr, ETH_ALEN); init_link_config(&adapter->port[i].link_config, bi); } diff --git a/drivers/net/chelsio/suni1x10gexp_regs.h b/drivers/net/chelsio/suni1x10gexp_regs.h index 98352bdda89..81816c2b708 100644 --- a/drivers/net/chelsio/suni1x10gexp_regs.h +++ b/drivers/net/chelsio/suni1x10gexp_regs.h @@ -1,8 +1,8 @@ /***************************************************************************** * * * File: suni1x10gexp_regs.h * - * $Revision: 1.4 $ * - * $Date: 2005/03/23 07:15:59 $ * + * $Revision: 1.9 $ * + * $Date: 2005/06/22 00:17:04 $ * * Description: * * PMC/SIERRA (pm3393) MAC-PHY functionality. * * part of the Chelsio 10Gb Ethernet Driver. * @@ -21,24 +21,16 @@ * * * http://www.chelsio.com * * * - * Copyright (c) 2003 - 2005 Chelsio Communications, Inc. * - * All rights reserved. * - * * * Maintainers: maintainers@chelsio.com * * * - * Authors: Dimitrios Michailidis * - * Tina Yang * - * Felix Marti * - * Scott Bardone * - * Kurt Ottaway * - * Frank DiMambro * + * Authors: PMC/SIERRA * * * * History: * * * ****************************************************************************/ -#ifndef _SUNI1x10GEXP_REGS_H -#define _SUNI1x10GEXP_REGS_H +#ifndef _CXGB_SUNI1x10GEXP_REGS_H_ +#define _CXGB_SUNI1x10GEXP_REGS_H_ /******************************************************************************/ /** S/UNI-1x10GE-XP REGISTER ADDRESS MAP **/ @@ -217,5 +209,5 @@ #define SUNI1x10GEXP_BITMSK_TXXG_FCRX 0x0004 #define SUNI1x10GEXP_BITMSK_TXXG_PADEN 0x0002 -#endif /* _SUNI1x10GEXP_REGS_H */ +#endif /* _CXGB_SUNI1x10GEXP_REGS_H_ */ diff --git a/drivers/net/chelsio/tp.c b/drivers/net/chelsio/tp.c deleted file mode 100644 index 9ad5c539fd2..00000000000 --- a/drivers/net/chelsio/tp.c +++ /dev/null @@ -1,188 +0,0 @@ -/***************************************************************************** - * * - * File: tp.c * - * $Revision: 1.6 $ * - * $Date: 2005/03/23 07:15:59 $ * - * Description: * - * Core ASIC Management. * - * part of the Chelsio 10Gb Ethernet Driver. * - * * - * This program is free software; you can redistribute it and/or modify * - * it under the terms of the GNU General Public License, version 2, as * - * published by the Free Software Foundation. * - * * - * You should have received a copy of the GNU General Public License along * - * with this program; if not, write to the Free Software Foundation, Inc., * - * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. * - * * - * THIS SOFTWARE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR IMPLIED * - * WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED WARRANTIES OF * - * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. * - * * - * http://www.chelsio.com * - * * - * Copyright (c) 2003 - 2005 Chelsio Communications, Inc. * - * All rights reserved. * - * * - * Maintainers: maintainers@chelsio.com * - * * - * Authors: Dimitrios Michailidis * - * Tina Yang * - * Felix Marti * - * Scott Bardone * - * Kurt Ottaway * - * Frank DiMambro * - * * - * History: * - * * - ****************************************************************************/ - -#include "common.h" -#include "regs.h" -#include "tp.h" - -struct petp { - adapter_t *adapter; -}; - -/* Pause deadlock avoidance parameters */ -#define DROP_MSEC 16 -#define DROP_PKTS_CNT 1 - - -static void tp_init(adapter_t *ap, const struct tp_params *p, - unsigned int tp_clk) -{ - if (t1_is_asic(ap)) { - u32 val; - - val = F_TP_IN_CSPI_CPL | F_TP_IN_CSPI_CHECK_IP_CSUM | - F_TP_IN_CSPI_CHECK_TCP_CSUM | F_TP_IN_ESPI_ETHERNET; - if (!p->pm_size) - val |= F_OFFLOAD_DISABLE; - else - val |= F_TP_IN_ESPI_CHECK_IP_CSUM | - F_TP_IN_ESPI_CHECK_TCP_CSUM; - t1_write_reg_4(ap, A_TP_IN_CONFIG, val); - t1_write_reg_4(ap, A_TP_OUT_CONFIG, F_TP_OUT_CSPI_CPL | - F_TP_OUT_ESPI_ETHERNET | - F_TP_OUT_ESPI_GENERATE_IP_CSUM | - F_TP_OUT_ESPI_GENERATE_TCP_CSUM); - t1_write_reg_4(ap, A_TP_GLOBAL_CONFIG, V_IP_TTL(64) | - F_PATH_MTU /* IP DF bit */ | - V_5TUPLE_LOOKUP(p->use_5tuple_mode) | - V_SYN_COOKIE_PARAMETER(29)); - - /* - * Enable pause frame deadlock prevention. - */ - if (is_T2(ap)) { - u32 drop_ticks = DROP_MSEC * (tp_clk / 1000); - - t1_write_reg_4(ap, A_TP_TX_DROP_CONFIG, - F_ENABLE_TX_DROP | F_ENABLE_TX_ERROR | - V_DROP_TICKS_CNT(drop_ticks) | - V_NUM_PKTS_DROPPED(DROP_PKTS_CNT)); - } - - } -} - -void t1_tp_destroy(struct petp *tp) -{ - kfree(tp); -} - -struct petp * __devinit t1_tp_create(adapter_t *adapter, struct tp_params *p) -{ - struct petp *tp = kmalloc(sizeof(*tp), GFP_KERNEL); - if (!tp) - return NULL; - memset(tp, 0, sizeof(*tp)); - tp->adapter = adapter; - - return tp; -} - -void t1_tp_intr_enable(struct petp *tp) -{ - u32 tp_intr = t1_read_reg_4(tp->adapter, A_PL_ENABLE); - - { - /* We don't use any TP interrupts */ - t1_write_reg_4(tp->adapter, A_TP_INT_ENABLE, 0); - t1_write_reg_4(tp->adapter, A_PL_ENABLE, - tp_intr | F_PL_INTR_TP); - } -} - -void t1_tp_intr_disable(struct petp *tp) -{ - u32 tp_intr = t1_read_reg_4(tp->adapter, A_PL_ENABLE); - - { - t1_write_reg_4(tp->adapter, A_TP_INT_ENABLE, 0); - t1_write_reg_4(tp->adapter, A_PL_ENABLE, - tp_intr & ~F_PL_INTR_TP); - } -} - -void t1_tp_intr_clear(struct petp *tp) -{ - t1_write_reg_4(tp->adapter, A_TP_INT_CAUSE, 0xffffffff); - t1_write_reg_4(tp->adapter, A_PL_CAUSE, F_PL_INTR_TP); -} - -int t1_tp_intr_handler(struct petp *tp) -{ - u32 cause; - - - cause = t1_read_reg_4(tp->adapter, A_TP_INT_CAUSE); - t1_write_reg_4(tp->adapter, A_TP_INT_CAUSE, cause); - return 0; -} - -static void set_csum_offload(struct petp *tp, u32 csum_bit, int enable) -{ - u32 val = t1_read_reg_4(tp->adapter, A_TP_GLOBAL_CONFIG); - - if (enable) - val |= csum_bit; - else - val &= ~csum_bit; - t1_write_reg_4(tp->adapter, A_TP_GLOBAL_CONFIG, val); -} - -void t1_tp_set_ip_checksum_offload(struct petp *tp, int enable) -{ - set_csum_offload(tp, F_IP_CSUM, enable); -} - -void t1_tp_set_udp_checksum_offload(struct petp *tp, int enable) -{ - set_csum_offload(tp, F_UDP_CSUM, enable); -} - -void t1_tp_set_tcp_checksum_offload(struct petp *tp, int enable) -{ - set_csum_offload(tp, F_TCP_CSUM, enable); -} - -/* - * Initialize TP state. tp_params contains initial settings for some TP - * parameters, particularly the one-time PM and CM settings. - */ -int t1_tp_reset(struct petp *tp, struct tp_params *p, unsigned int tp_clk) -{ - int busy = 0; - adapter_t *adapter = tp->adapter; - - tp_init(adapter, p, tp_clk); - if (!busy) - t1_write_reg_4(adapter, A_TP_RESET, F_TP_RESET); - else - CH_ERR("%s: TP initialization timed out\n", - adapter->name); - return busy; -} diff --git a/drivers/net/chelsio/tp.h b/drivers/net/chelsio/tp.h deleted file mode 100644 index 2ebc5c0d62e..00000000000 --- a/drivers/net/chelsio/tp.h +++ /dev/null @@ -1,110 +0,0 @@ -/***************************************************************************** - * * - * File: tp.h * - * $Revision: 1.3 $ * - * $Date: 2005/03/23 07:15:59 $ * - * Description: * - * part of the Chelsio 10Gb Ethernet Driver. * - * * - * This program is free software; you can redistribute it and/or modify * - * it under the terms of the GNU General Public License, version 2, as * - * published by the Free Software Foundation. * - * * - * You should have received a copy of the GNU General Public License along * - * with this program; if not, write to the Free Software Foundation, Inc., * - * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. * - * * - * THIS SOFTWARE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR IMPLIED * - * WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED WARRANTIES OF * - * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. * - * * - * http://www.chelsio.com * - * * - * Copyright (c) 2003 - 2005 Chelsio Communications, Inc. * - * All rights reserved. * - * * - * Maintainers: maintainers@chelsio.com * - * * - * Authors: Dimitrios Michailidis * - * Tina Yang * - * Felix Marti * - * Scott Bardone * - * Kurt Ottaway * - * Frank DiMambro * - * * - * History: * - * * - ****************************************************************************/ - -#ifndef CHELSIO_TP_H -#define CHELSIO_TP_H - -#include "common.h" - -#define TP_MAX_RX_COALESCING_SIZE 16224U - -struct tp_mib_statistics { - - /* IP */ - u32 ipInReceive_hi; - u32 ipInReceive_lo; - u32 ipInHdrErrors_hi; - u32 ipInHdrErrors_lo; - u32 ipInAddrErrors_hi; - u32 ipInAddrErrors_lo; - u32 ipInUnknownProtos_hi; - u32 ipInUnknownProtos_lo; - u32 ipInDiscards_hi; - u32 ipInDiscards_lo; - u32 ipInDelivers_hi; - u32 ipInDelivers_lo; - u32 ipOutRequests_hi; - u32 ipOutRequests_lo; - u32 ipOutDiscards_hi; - u32 ipOutDiscards_lo; - u32 ipOutNoRoutes_hi; - u32 ipOutNoRoutes_lo; - u32 ipReasmTimeout; - u32 ipReasmReqds; - u32 ipReasmOKs; - u32 ipReasmFails; - - u32 reserved[8]; - - /* TCP */ - u32 tcpActiveOpens; - u32 tcpPassiveOpens; - u32 tcpAttemptFails; - u32 tcpEstabResets; - u32 tcpOutRsts; - u32 tcpCurrEstab; - u32 tcpInSegs_hi; - u32 tcpInSegs_lo; - u32 tcpOutSegs_hi; - u32 tcpOutSegs_lo; - u32 tcpRetransSeg_hi; - u32 tcpRetransSeg_lo; - u32 tcpInErrs_hi; - u32 tcpInErrs_lo; - u32 tcpRtoMin; - u32 tcpRtoMax; -}; - -struct petp; -struct tp_params; - -struct petp *t1_tp_create(adapter_t *adapter, struct tp_params *p); -void t1_tp_destroy(struct petp *tp); - -void t1_tp_intr_disable(struct petp *tp); -void t1_tp_intr_enable(struct petp *tp); -void t1_tp_intr_clear(struct petp *tp); -int t1_tp_intr_handler(struct petp *tp); - -void t1_tp_get_mib_statistics(adapter_t *adap, struct tp_mib_statistics *tps); -void t1_tp_set_udp_checksum_offload(struct petp *tp, int enable); -void t1_tp_set_tcp_checksum_offload(struct petp *tp, int enable); -void t1_tp_set_ip_checksum_offload(struct petp *tp, int enable); -int t1_tp_set_coalescing_size(struct petp *tp, unsigned int size); -int t1_tp_reset(struct petp *tp, struct tp_params *p, unsigned int tp_clk); -#endif diff --git a/include/linux/pci_ids.h b/include/linux/pci_ids.h index 63e89e47b8e..41e35a72b96 100644 --- a/include/linux/pci_ids.h +++ b/include/linux/pci_ids.h @@ -2120,6 +2120,7 @@ #define PCI_DEVICE_ID_ENE_1225 0x1225 #define PCI_DEVICE_ID_ENE_1410 0x1410 #define PCI_DEVICE_ID_ENE_1420 0x1420 +#define PCI_VENDOR_ID_CHELSIO 0x1425 #define PCI_VENDOR_ID_SYBA 0x1592 #define PCI_DEVICE_ID_SYBA_2P_EPP 0x0782 -- cgit v1.2.3 From 2d0f9eaff8e1d08b9707f5d24fe6b0ac95d231e3 Mon Sep 17 00:00:00 2001 From: Dave Airlie Date: Sun, 10 Jul 2005 14:34:13 +1000 Subject: drm: add _DRM_CONSISTENT map type Added a new DRM map type _DRM_CONSISTENT for consistent PCI memory. It uses drm_pci_alloc/free for allocating/freeing the memory. From: Felix Kuhling Signed-off-by: David Airlie --- drivers/char/drm/drm.h | 3 ++- drivers/char/drm/drm_bufs.c | 20 +++++++++++++++++++- drivers/char/drm/drm_drv.c | 4 ++++ drivers/char/drm/drm_proc.c | 13 ++++++++----- drivers/char/drm/drm_vm.c | 7 +++++++ 5 files changed, 40 insertions(+), 7 deletions(-) diff --git a/drivers/char/drm/drm.h b/drivers/char/drm/drm.h index e8371dd87fb..50c4d981c49 100644 --- a/drivers/char/drm/drm.h +++ b/drivers/char/drm/drm.h @@ -209,7 +209,8 @@ typedef enum drm_map_type { _DRM_REGISTERS = 1, /**< no caching, no core dump */ _DRM_SHM = 2, /**< shared, cached */ _DRM_AGP = 3, /**< AGP/GART */ - _DRM_SCATTER_GATHER = 4 /**< Scatter/gather memory for PCI DMA */ + _DRM_SCATTER_GATHER = 4, /**< Scatter/gather memory for PCI DMA */ + _DRM_CONSISTENT = 5, /**< Consistent memory for PCI DMA */ } drm_map_type_t; diff --git a/drivers/char/drm/drm_bufs.c b/drivers/char/drm/drm_bufs.c index 4c6191d231b..89f301ffd97 100644 --- a/drivers/char/drm/drm_bufs.c +++ b/drivers/char/drm/drm_bufs.c @@ -180,7 +180,22 @@ int drm_addmap( struct inode *inode, struct file *filp, } map->offset += dev->sg->handle; break; - + case _DRM_CONSISTENT: + { + /* dma_addr_t is 64bit on i386 with CONFIG_HIGHMEM64G, + * As we're limit the address to 2^32-1 (or lses), + * casting it down to 32 bits is no problem, but we + * need to point to a 64bit variable first. */ + dma_addr_t bus_addr; + map->handle = drm_pci_alloc(dev, map->size, map->size, + 0xffffffffUL, &bus_addr); + map->offset = (unsigned long)bus_addr; + if (!map->handle) { + drm_free(map, sizeof(*map), DRM_MEM_MAPS); + return -ENOMEM; + } + break; + } default: drm_free( map, sizeof(*map), DRM_MEM_MAPS ); return -EINVAL; @@ -291,6 +306,9 @@ int drm_rmmap(struct inode *inode, struct file *filp, case _DRM_AGP: case _DRM_SCATTER_GATHER: break; + case _DRM_CONSISTENT: + drm_pci_free(dev, map->size, map->handle, map->offset); + break; } drm_free(map, sizeof(*map), DRM_MEM_MAPS); } diff --git a/drivers/char/drm/drm_drv.c b/drivers/char/drm/drm_drv.c index 3333c250c4d..f4046c8c70b 100644 --- a/drivers/char/drm/drm_drv.c +++ b/drivers/char/drm/drm_drv.c @@ -228,6 +228,10 @@ int drm_takedown( drm_device_t *dev ) dev->sg = NULL; } break; + case _DRM_CONSISTENT: + drm_pci_free(dev, map->size, + map->handle, map->offset); + break; } drm_free(map, sizeof(*map), DRM_MEM_MAPS); } diff --git a/drivers/char/drm/drm_proc.c b/drivers/char/drm/drm_proc.c index 4774087d2e9..f4154cc71ab 100644 --- a/drivers/char/drm/drm_proc.c +++ b/drivers/char/drm/drm_proc.c @@ -210,8 +210,8 @@ static int drm__vm_info(char *buf, char **start, off_t offset, int request, /* Hardcoded from _DRM_FRAME_BUFFER, _DRM_REGISTERS, _DRM_SHM, _DRM_AGP, and - _DRM_SCATTER_GATHER. */ - const char *types[] = { "FB", "REG", "SHM", "AGP", "SG" }; + _DRM_SCATTER_GATHER and _DRM_CONSISTENT */ + const char *types[] = { "FB", "REG", "SHM", "AGP", "SG", "PCI" }; const char *type; int i; @@ -229,9 +229,12 @@ static int drm__vm_info(char *buf, char **start, off_t offset, int request, if (dev->maplist != NULL) list_for_each(list, &dev->maplist->head) { r_list = list_entry(list, drm_map_list_t, head); map = r_list->map; - if(!map) continue; - if (map->type < 0 || map->type > 4) type = "??"; - else type = types[map->type]; + if(!map) + continue; + if (map->type < 0 || map->type > 5) + type = "??"; + else + type = types[map->type]; DRM_PROC_PRINT("%4d 0x%08lx 0x%08lx %4.4s 0x%02x 0x%08lx ", i, map->offset, diff --git a/drivers/char/drm/drm_vm.c b/drivers/char/drm/drm_vm.c index 621220f3f37..644ec9dadc0 100644 --- a/drivers/char/drm/drm_vm.c +++ b/drivers/char/drm/drm_vm.c @@ -228,6 +228,10 @@ static void drm_vm_shm_close(struct vm_area_struct *vma) case _DRM_AGP: case _DRM_SCATTER_GATHER: break; + case _DRM_CONSISTENT: + drm_pci_free(dev, map->size, map->handle, + map->offset); + break; } drm_free(map, sizeof(*map), DRM_MEM_MAPS); } @@ -645,6 +649,9 @@ int drm_mmap(struct file *filp, struct vm_area_struct *vma) vma->vm_ops = &drm_vm_ops; break; case _DRM_SHM: + case _DRM_CONSISTENT: + /* Consistent memory is really like shared memory. It's only + * allocate in a different way */ vma->vm_ops = &drm_vm_shm_ops; vma->vm_private_data = (void *)map; /* Don't let this area swap. Change when -- cgit v1.2.3 From b84397d6390ef04e8080d66bf528418ab5e75dc0 Mon Sep 17 00:00:00 2001 From: Dave Airlie Date: Sun, 10 Jul 2005 14:46:12 +1000 Subject: drm: add framebuffer maps The patch makes drmAddBufs/drmMapBufs can handle buffers in video memory The attached patch adds a new buffer type DRM_FB_BUFFER. It works like AGP memory but uses video memory. From: Austin Yuan Signed-off-by: Dave Airlie --- drivers/char/drm/drm.h | 3 +- drivers/char/drm/drmP.h | 4 +- drivers/char/drm/drm_bufs.c | 175 +++++++++++++++++++++++++++++++++++++++++++- 3 files changed, 178 insertions(+), 4 deletions(-) diff --git a/drivers/char/drm/drm.h b/drivers/char/drm/drm.h index 50c4d981c49..3a4745f76cf 100644 --- a/drivers/char/drm/drm.h +++ b/drivers/char/drm/drm.h @@ -369,7 +369,8 @@ typedef struct drm_buf_desc { enum { _DRM_PAGE_ALIGN = 0x01, /**< Align on page boundaries for DMA */ _DRM_AGP_BUFFER = 0x02, /**< Buffer is in AGP space */ - _DRM_SG_BUFFER = 0x04 /**< Scatter/gather memory buffer */ + _DRM_SG_BUFFER = 0x04, /**< Scatter/gather memory buffer */ + _DRM_FB_BUFFER = 0x08 /**< Buffer is in frame buffer */ } flags; unsigned long agp_start; /**< * Start address of where the AGP buffers are diff --git a/drivers/char/drm/drmP.h b/drivers/char/drm/drmP.h index 5df09cc8c6d..804e622436a 100644 --- a/drivers/char/drm/drmP.h +++ b/drivers/char/drm/drmP.h @@ -96,6 +96,7 @@ #define DRIVER_IRQ_SHARED 0x80 #define DRIVER_IRQ_VBL 0x100 #define DRIVER_DMA_QUEUE 0x200 +#define DRIVER_FB_DMA 0x400 /***********************************************************************/ /** \name Begin the DRM... */ @@ -474,7 +475,8 @@ typedef struct drm_device_dma { unsigned long byte_count; enum { _DRM_DMA_USE_AGP = 0x01, - _DRM_DMA_USE_SG = 0x02 + _DRM_DMA_USE_SG = 0x02, + _DRM_DMA_USE_FB = 0x04 } flags; } drm_device_dma_t; diff --git a/drivers/char/drm/drm_bufs.c b/drivers/char/drm/drm_bufs.c index 89f301ffd97..7c20dc344b9 100644 --- a/drivers/char/drm/drm_bufs.c +++ b/drivers/char/drm/drm_bufs.c @@ -935,6 +935,172 @@ static int drm_addbufs_sg( struct inode *inode, struct file *filp, return 0; } +int drm_addbufs_fb(struct inode *inode, struct file *filp, + unsigned int cmd, unsigned long arg) +{ + drm_file_t *priv = filp->private_data; + drm_device_t *dev = priv->head->dev; + drm_device_dma_t *dma = dev->dma; + drm_buf_desc_t request; + drm_buf_entry_t *entry; + drm_buf_t *buf; + unsigned long offset; + unsigned long agp_offset; + int count; + int order; + int size; + int alignment; + int page_order; + int total; + int byte_count; + int i; + drm_buf_t **temp_buflist; + drm_buf_desc_t __user *argp = (void __user *)arg; + + if (!drm_core_check_feature(dev, DRIVER_FB_DMA)) + return -EINVAL; + + if (!dma) + return -EINVAL; + + if (copy_from_user(&request, argp, sizeof(request))) + return -EFAULT; + + count = request.count; + order = drm_order(request.size); + size = 1 << order; + + alignment = (request.flags & _DRM_PAGE_ALIGN) + ? PAGE_ALIGN(size) : size; + page_order = order - PAGE_SHIFT > 0 ? order - PAGE_SHIFT : 0; + total = PAGE_SIZE << page_order; + + byte_count = 0; + agp_offset = request.agp_start; + + DRM_DEBUG("count: %d\n", count); + DRM_DEBUG("order: %d\n", order); + DRM_DEBUG("size: %d\n", size); + DRM_DEBUG("agp_offset: %lu\n", agp_offset); + DRM_DEBUG("alignment: %d\n", alignment); + DRM_DEBUG("page_order: %d\n", page_order); + DRM_DEBUG("total: %d\n", total); + + if (order < DRM_MIN_ORDER || order > DRM_MAX_ORDER) + return -EINVAL; + if (dev->queue_count) + return -EBUSY; /* Not while in use */ + + spin_lock(&dev->count_lock); + if (dev->buf_use) { + spin_unlock(&dev->count_lock); + return -EBUSY; + } + atomic_inc(&dev->buf_alloc); + spin_unlock(&dev->count_lock); + + down(&dev->struct_sem); + entry = &dma->bufs[order]; + if (entry->buf_count) { + up(&dev->struct_sem); + atomic_dec(&dev->buf_alloc); + return -ENOMEM; /* May only call once for each order */ + } + + if (count < 0 || count > 4096) { + up(&dev->struct_sem); + atomic_dec(&dev->buf_alloc); + return -EINVAL; + } + + entry->buflist = drm_alloc(count * sizeof(*entry->buflist), + DRM_MEM_BUFS); + if (!entry->buflist) { + up(&dev->struct_sem); + atomic_dec(&dev->buf_alloc); + return -ENOMEM; + } + memset(entry->buflist, 0, count * sizeof(*entry->buflist)); + + entry->buf_size = size; + entry->page_order = page_order; + + offset = 0; + + while (entry->buf_count < count) { + buf = &entry->buflist[entry->buf_count]; + buf->idx = dma->buf_count + entry->buf_count; + buf->total = alignment; + buf->order = order; + buf->used = 0; + + buf->offset = (dma->byte_count + offset); + buf->bus_address = agp_offset + offset; + buf->address = (void *)(agp_offset + offset); + buf->next = NULL; + buf->waiting = 0; + buf->pending = 0; + init_waitqueue_head(&buf->dma_wait); + buf->filp = NULL; + + buf->dev_priv_size = dev->driver->dev_priv_size; + buf->dev_private = drm_alloc(buf->dev_priv_size, DRM_MEM_BUFS); + if (!buf->dev_private) { + /* Set count correctly so we free the proper amount. */ + entry->buf_count = count; + drm_cleanup_buf_error(dev, entry); + up(&dev->struct_sem); + atomic_dec(&dev->buf_alloc); + return -ENOMEM; + } + memset(buf->dev_private, 0, buf->dev_priv_size); + + DRM_DEBUG("buffer %d @ %p\n", entry->buf_count, buf->address); + + offset += alignment; + entry->buf_count++; + byte_count += PAGE_SIZE << page_order; + } + + DRM_DEBUG("byte_count: %d\n", byte_count); + + temp_buflist = drm_realloc(dma->buflist, + dma->buf_count * sizeof(*dma->buflist), + (dma->buf_count + entry->buf_count) + * sizeof(*dma->buflist), DRM_MEM_BUFS); + if (!temp_buflist) { + /* Free the entry because it isn't valid */ + drm_cleanup_buf_error(dev, entry); + up(&dev->struct_sem); + atomic_dec(&dev->buf_alloc); + return -ENOMEM; + } + dma->buflist = temp_buflist; + + for (i = 0; i < entry->buf_count; i++) { + dma->buflist[i + dma->buf_count] = &entry->buflist[i]; + } + + dma->buf_count += entry->buf_count; + dma->byte_count += byte_count; + + DRM_DEBUG("dma->buf_count : %d\n", dma->buf_count); + DRM_DEBUG("entry->buf_count : %d\n", entry->buf_count); + + up(&dev->struct_sem); + + request.count = entry->buf_count; + request.size = size; + + if (copy_to_user(argp, &request, sizeof(request))) + return -EFAULT; + + dma->flags = _DRM_DMA_USE_FB; + + atomic_dec(&dev->buf_alloc); + return 0; +} + /** * Add buffers for DMA transfers (ioctl). * @@ -970,6 +1136,8 @@ int drm_addbufs( struct inode *inode, struct file *filp, #endif if ( request.flags & _DRM_SG_BUFFER ) return drm_addbufs_sg( inode, filp, cmd, arg ); + else if ( request.flags & _DRM_FB_BUFFER) + return drm_addbufs_fb( inode, filp, cmd, arg ); else return drm_addbufs_pci( inode, filp, cmd, arg ); } @@ -1214,8 +1382,11 @@ int drm_mapbufs( struct inode *inode, struct file *filp, return -EFAULT; if ( request.count >= dma->buf_count ) { - if ((drm_core_has_AGP(dev) && (dma->flags & _DRM_DMA_USE_AGP)) || - (drm_core_check_feature(dev, DRIVER_SG) && (dma->flags & _DRM_DMA_USE_SG)) ) { + if ((drm_core_has_AGP(dev) && (dma->flags & _DRM_DMA_USE_AGP)) + || (drm_core_check_feature(dev, DRIVER_SG) + && (dma->flags & _DRM_DMA_USE_SG)) + || (drm_core_check_feature(dev, DRIVER_FB_DMA) + && (dma->flags & _DRM_DMA_USE_FB))) { drm_map_t *map = dev->agp_buffer_map; if ( !map ) { -- cgit v1.2.3 From d59431bf96d1e8a3d6d240343f559f5e2ace7f1d Mon Sep 17 00:00:00 2001 From: Dave Airlie Date: Sun, 10 Jul 2005 15:00:06 +1000 Subject: Refactor common, boilerplate ioctl code from drm_addbufs_* functions into drm_addbufs. This makes the code more like the BSD code, and makes the drm_addbufs_* functions callable in-kernel. From: Ian Romanick Signed-off-by: Dave Airlie --- drivers/char/drm/drm_bufs.c | 126 ++++++++++++++++---------------------------- 1 file changed, 44 insertions(+), 82 deletions(-) diff --git a/drivers/char/drm/drm_bufs.c b/drivers/char/drm/drm_bufs.c index 7c20dc344b9..eb3cf550626 100644 --- a/drivers/char/drm/drm_bufs.c +++ b/drivers/char/drm/drm_bufs.c @@ -362,25 +362,19 @@ static void drm_cleanup_buf_error(drm_device_t *dev, drm_buf_entry_t *entry) #if __OS_HAS_AGP /** - * Add AGP buffers for DMA transfers (ioctl). + * Add AGP buffers for DMA transfers. * - * \param inode device inode. - * \param filp file pointer. - * \param cmd command. - * \param arg pointer to a drm_buf_desc_t request. + * \param dev drm_device_t to which the buffers are to be added. + * \param request pointer to a drm_buf_desc_t describing the request. * \return zero on success or a negative number on failure. * * After some sanity checks creates a drm_buf structure for each buffer and * reallocates the buffer list of the same size order to accommodate the new * buffers. */ -static int drm_addbufs_agp( struct inode *inode, struct file *filp, - unsigned int cmd, unsigned long arg ) +static int drm_addbufs_agp(drm_device_t *dev, drm_buf_desc_t *request) { - drm_file_t *priv = filp->private_data; - drm_device_t *dev = priv->head->dev; drm_device_dma_t *dma = dev->dma; - drm_buf_desc_t request; drm_buf_entry_t *entry; drm_buf_t *buf; unsigned long offset; @@ -394,25 +388,20 @@ static int drm_addbufs_agp( struct inode *inode, struct file *filp, int byte_count; int i; drm_buf_t **temp_buflist; - drm_buf_desc_t __user *argp = (void __user *)arg; if ( !dma ) return -EINVAL; - if ( copy_from_user( &request, argp, - sizeof(request) ) ) - return -EFAULT; - - count = request.count; - order = drm_order( request.size ); + count = request->count; + order = drm_order(request->size); size = 1 << order; - alignment = (request.flags & _DRM_PAGE_ALIGN) + alignment = (request->flags & _DRM_PAGE_ALIGN) ? PAGE_ALIGN(size) : size; page_order = order - PAGE_SHIFT > 0 ? order - PAGE_SHIFT : 0; total = PAGE_SIZE << page_order; byte_count = 0; - agp_offset = dev->agp->base + request.agp_start; + agp_offset = dev->agp->base + request->agp_start; DRM_DEBUG( "count: %d\n", count ); DRM_DEBUG( "order: %d\n", order ); @@ -526,11 +515,8 @@ static int drm_addbufs_agp( struct inode *inode, struct file *filp, up( &dev->struct_sem ); - request.count = entry->buf_count; - request.size = size; - - if ( copy_to_user( argp, &request, sizeof(request) ) ) - return -EFAULT; + request->count = entry->buf_count; + request->size = size; dma->flags = _DRM_DMA_USE_AGP; @@ -539,13 +525,9 @@ static int drm_addbufs_agp( struct inode *inode, struct file *filp, } #endif /* __OS_HAS_AGP */ -static int drm_addbufs_pci( struct inode *inode, struct file *filp, - unsigned int cmd, unsigned long arg ) +static int drm_addbufs_pci(drm_device_t *dev, drm_buf_desc_t *request) { - drm_file_t *priv = filp->private_data; - drm_device_t *dev = priv->head->dev; drm_device_dma_t *dma = dev->dma; - drm_buf_desc_t request; int count; int order; int size; @@ -561,26 +543,22 @@ static int drm_addbufs_pci( struct inode *inode, struct file *filp, int page_count; unsigned long *temp_pagelist; drm_buf_t **temp_buflist; - drm_buf_desc_t __user *argp = (void __user *)arg; if (!drm_core_check_feature(dev, DRIVER_PCI_DMA)) return -EINVAL; if ( !dma ) return -EINVAL; - if ( copy_from_user( &request, argp, sizeof(request) ) ) - return -EFAULT; - - count = request.count; - order = drm_order( request.size ); + count = request->count; + order = drm_order(request->size); size = 1 << order; DRM_DEBUG( "count=%d, size=%d (%d), order=%d, queue_count=%d\n", - request.count, request.size, size, + request->count, request->size, size, order, dev->queue_count ); if ( order < DRM_MIN_ORDER || order > DRM_MAX_ORDER ) return -EINVAL; if ( dev->queue_count ) return -EBUSY; /* Not while in use */ - alignment = (request.flags & _DRM_PAGE_ALIGN) + alignment = (request->flags & _DRM_PAGE_ALIGN) ? PAGE_ALIGN(size) : size; page_order = order - PAGE_SHIFT > 0 ? order - PAGE_SHIFT : 0; total = PAGE_SIZE << page_order; @@ -758,25 +736,17 @@ static int drm_addbufs_pci( struct inode *inode, struct file *filp, up( &dev->struct_sem ); - request.count = entry->buf_count; - request.size = size; - - if ( copy_to_user( argp, &request, sizeof(request) ) ) - return -EFAULT; + request->count = entry->buf_count; + request->size = size; atomic_dec( &dev->buf_alloc ); return 0; } -static int drm_addbufs_sg( struct inode *inode, struct file *filp, - unsigned int cmd, unsigned long arg ) +static int drm_addbufs_sg(drm_device_t *dev, drm_buf_desc_t *request) { - drm_file_t *priv = filp->private_data; - drm_device_t *dev = priv->head->dev; drm_device_dma_t *dma = dev->dma; - drm_buf_desc_t __user *argp = (void __user *)arg; - drm_buf_desc_t request; drm_buf_entry_t *entry; drm_buf_t *buf; unsigned long offset; @@ -795,20 +765,17 @@ static int drm_addbufs_sg( struct inode *inode, struct file *filp, if ( !dma ) return -EINVAL; - if ( copy_from_user( &request, argp, sizeof(request) ) ) - return -EFAULT; - - count = request.count; - order = drm_order( request.size ); + count = request->count; + order = drm_order(request->size); size = 1 << order; - alignment = (request.flags & _DRM_PAGE_ALIGN) + alignment = (request->flags & _DRM_PAGE_ALIGN) ? PAGE_ALIGN(size) : size; page_order = order - PAGE_SHIFT > 0 ? order - PAGE_SHIFT : 0; total = PAGE_SIZE << page_order; byte_count = 0; - agp_offset = request.agp_start; + agp_offset = request->agp_start; DRM_DEBUG( "count: %d\n", count ); DRM_DEBUG( "order: %d\n", order ); @@ -923,11 +890,8 @@ static int drm_addbufs_sg( struct inode *inode, struct file *filp, up( &dev->struct_sem ); - request.count = entry->buf_count; - request.size = size; - - if ( copy_to_user( argp, &request, sizeof(request) ) ) - return -EFAULT; + request->count = entry->buf_count; + request->size = size; dma->flags = _DRM_DMA_USE_SG; @@ -935,13 +899,9 @@ static int drm_addbufs_sg( struct inode *inode, struct file *filp, return 0; } -int drm_addbufs_fb(struct inode *inode, struct file *filp, - unsigned int cmd, unsigned long arg) +int drm_addbufs_fb(drm_device_t *dev, drm_buf_desc_t *request) { - drm_file_t *priv = filp->private_data; - drm_device_t *dev = priv->head->dev; drm_device_dma_t *dma = dev->dma; - drm_buf_desc_t request; drm_buf_entry_t *entry; drm_buf_t *buf; unsigned long offset; @@ -955,7 +915,6 @@ int drm_addbufs_fb(struct inode *inode, struct file *filp, int byte_count; int i; drm_buf_t **temp_buflist; - drm_buf_desc_t __user *argp = (void __user *)arg; if (!drm_core_check_feature(dev, DRIVER_FB_DMA)) return -EINVAL; @@ -963,20 +922,17 @@ int drm_addbufs_fb(struct inode *inode, struct file *filp, if (!dma) return -EINVAL; - if (copy_from_user(&request, argp, sizeof(request))) - return -EFAULT; - - count = request.count; - order = drm_order(request.size); + count = request->count; + order = drm_order(request->size); size = 1 << order; - alignment = (request.flags & _DRM_PAGE_ALIGN) + alignment = (request->flags & _DRM_PAGE_ALIGN) ? PAGE_ALIGN(size) : size; page_order = order - PAGE_SHIFT > 0 ? order - PAGE_SHIFT : 0; total = PAGE_SIZE << page_order; byte_count = 0; - agp_offset = request.agp_start; + agp_offset = request->agp_start; DRM_DEBUG("count: %d\n", count); DRM_DEBUG("order: %d\n", order); @@ -1089,11 +1045,8 @@ int drm_addbufs_fb(struct inode *inode, struct file *filp, up(&dev->struct_sem); - request.count = entry->buf_count; - request.size = size; - - if (copy_to_user(argp, &request, sizeof(request))) - return -EFAULT; + request->count = entry->buf_count; + request->size = size; dma->flags = _DRM_DMA_USE_FB; @@ -1121,6 +1074,7 @@ int drm_addbufs( struct inode *inode, struct file *filp, drm_buf_desc_t request; drm_file_t *priv = filp->private_data; drm_device_t *dev = priv->head->dev; + int ret; if (!drm_core_check_feature(dev, DRIVER_HAVE_DMA)) return -EINVAL; @@ -1131,15 +1085,23 @@ int drm_addbufs( struct inode *inode, struct file *filp, #if __OS_HAS_AGP if ( request.flags & _DRM_AGP_BUFFER ) - return drm_addbufs_agp( inode, filp, cmd, arg ); + ret=drm_addbufs_agp(dev, &request); else #endif if ( request.flags & _DRM_SG_BUFFER ) - return drm_addbufs_sg( inode, filp, cmd, arg ); + ret=drm_addbufs_sg(dev, &request); else if ( request.flags & _DRM_FB_BUFFER) - return drm_addbufs_fb( inode, filp, cmd, arg ); + ret=drm_addbufs_fb(dev, &request); else - return drm_addbufs_pci( inode, filp, cmd, arg ); + ret=drm_addbufs_pci(dev, &request); + + if (ret==0) { + if (copy_to_user((void __user *)arg, &request, + sizeof(request))) { + ret = -EFAULT; + } + } + return ret; } -- cgit v1.2.3 From 9c8da5ebbf6f87293cf8555182da271449889a69 Mon Sep 17 00:00:00 2001 From: Dave Airlie Date: Sun, 10 Jul 2005 15:38:56 +1000 Subject: drm: update support for drm pci buffers The DRM needs to change the drm_pci interface for FreeBSD compatiblity, this patch introduces the drm_dma_handle_t and uses it in the Linux code. From: Tonnerre Lombard, Eric Anholt, and Sergey Vlasov Signed-off-by: David Airlie --- drivers/char/drm/drmP.h | 16 ++++++++++------ drivers/char/drm/drm_bufs.c | 22 +++++++++++++--------- drivers/char/drm/drm_drv.c | 8 ++++++-- drivers/char/drm/drm_pci.c | 45 +++++++++++++++++++++++++++++++++------------ drivers/char/drm/drm_vm.c | 8 ++++++-- drivers/char/drm/i915_dma.c | 15 ++++++++------- drivers/char/drm/i915_drv.h | 3 ++- 7 files changed, 78 insertions(+), 39 deletions(-) diff --git a/drivers/char/drm/drmP.h b/drivers/char/drm/drmP.h index 804e622436a..7e633a9ce93 100644 --- a/drivers/char/drm/drmP.h +++ b/drivers/char/drm/drmP.h @@ -527,6 +527,12 @@ typedef struct drm_sigdata { drm_hw_lock_t *lock; } drm_sigdata_t; +typedef struct drm_dma_handle { + dma_addr_t busaddr; + void *vaddr; + size_t size; +} drm_dma_handle_t; + /** * Mappings list */ @@ -978,12 +984,10 @@ extern int drm_ati_pcigart_cleanup(drm_device_t *dev, unsigned long addr, dma_addr_t bus_addr); -extern void *drm_pci_alloc(drm_device_t * dev, size_t size, - size_t align, dma_addr_t maxaddr, - dma_addr_t * busaddr); - -extern void drm_pci_free(drm_device_t * dev, size_t size, - void *vaddr, dma_addr_t busaddr); +extern drm_dma_handle_t *drm_pci_alloc(drm_device_t *dev, size_t size, + size_t align, dma_addr_t maxaddr); +extern void __drm_pci_free(drm_device_t *dev, drm_dma_handle_t *dmah); +extern void drm_pci_free(drm_device_t *dev, drm_dma_handle_t *dmah); /* sysfs support (drm_sysfs.c) */ struct drm_sysfs_class; diff --git a/drivers/char/drm/drm_bufs.c b/drivers/char/drm/drm_bufs.c index eb3cf550626..be54efbefe8 100644 --- a/drivers/char/drm/drm_bufs.c +++ b/drivers/char/drm/drm_bufs.c @@ -90,6 +90,7 @@ int drm_addmap( struct inode *inode, struct file *filp, drm_map_t *map; drm_map_t __user *argp = (void __user *)arg; drm_map_list_t *list; + drm_dma_handle_t *dmah; if ( !(filp->f_mode & 3) ) return -EACCES; /* Require read/write */ @@ -181,21 +182,19 @@ int drm_addmap( struct inode *inode, struct file *filp, map->offset += dev->sg->handle; break; case _DRM_CONSISTENT: - { /* dma_addr_t is 64bit on i386 with CONFIG_HIGHMEM64G, - * As we're limit the address to 2^32-1 (or lses), + * As we're limiting the address to 2^32-1 (or less), * casting it down to 32 bits is no problem, but we * need to point to a 64bit variable first. */ - dma_addr_t bus_addr; - map->handle = drm_pci_alloc(dev, map->size, map->size, - 0xffffffffUL, &bus_addr); - map->offset = (unsigned long)bus_addr; - if (!map->handle) { + dmah = drm_pci_alloc(dev, map->size, map->size, 0xffffffffUL); + if (!dmah) { drm_free(map, sizeof(*map), DRM_MEM_MAPS); return -ENOMEM; } + map->handle = dmah->vaddr; + map->offset = (unsigned long)dmah->busaddr; + kfree(dmah); break; - } default: drm_free( map, sizeof(*map), DRM_MEM_MAPS ); return -EINVAL; @@ -286,6 +285,8 @@ int drm_rmmap(struct inode *inode, struct file *filp, } if(!found_maps) { + drm_dma_handle_t dmah; + switch (map->type) { case _DRM_REGISTERS: case _DRM_FRAME_BUFFER: @@ -307,7 +308,10 @@ int drm_rmmap(struct inode *inode, struct file *filp, case _DRM_SCATTER_GATHER: break; case _DRM_CONSISTENT: - drm_pci_free(dev, map->size, map->handle, map->offset); + dmah.vaddr = map->handle; + dmah.busaddr = map->offset; + dmah.size = map->size; + __drm_pci_free(dev, &dmah); break; } drm_free(map, sizeof(*map), DRM_MEM_MAPS); diff --git a/drivers/char/drm/drm_drv.c b/drivers/char/drm/drm_drv.c index f4046c8c70b..ab172ea8e98 100644 --- a/drivers/char/drm/drm_drv.c +++ b/drivers/char/drm/drm_drv.c @@ -198,6 +198,8 @@ int drm_takedown( drm_device_t *dev ) r_list = (drm_map_list_t *)list; if ( ( map = r_list->map ) ) { + drm_dma_handle_t dmah; + switch ( map->type ) { case _DRM_REGISTERS: case _DRM_FRAME_BUFFER: @@ -229,8 +231,10 @@ int drm_takedown( drm_device_t *dev ) } break; case _DRM_CONSISTENT: - drm_pci_free(dev, map->size, - map->handle, map->offset); + dmah.vaddr = map->handle; + dmah.busaddr = map->offset; + dmah.size = map->size; + __drm_pci_free(dev, &dmah); break; } drm_free(map, sizeof(*map), DRM_MEM_MAPS); diff --git a/drivers/char/drm/drm_pci.c b/drivers/char/drm/drm_pci.c index 192e8762571..3e452e8967f 100644 --- a/drivers/char/drm/drm_pci.c +++ b/drivers/char/drm/drm_pci.c @@ -46,10 +46,10 @@ /** * \brief Allocate a PCI consistent memory block, for DMA. */ -void *drm_pci_alloc(drm_device_t * dev, size_t size, size_t align, - dma_addr_t maxaddr, dma_addr_t * busaddr) +drm_dma_handle_t *drm_pci_alloc(drm_device_t * dev, size_t size, size_t align, + dma_addr_t maxaddr) { - void *address; + drm_dma_handle_t *dmah; #if DRM_DEBUG_MEMORY int area = DRM_MEM_DMA; @@ -74,13 +74,19 @@ void *drm_pci_alloc(drm_device_t * dev, size_t size, size_t align, return NULL; } - address = pci_alloc_consistent(dev->pdev, size, busaddr); + dmah = kmalloc(sizeof(drm_dma_handle_t), GFP_KERNEL); + if (!dmah) + return NULL; + + dmah->size = size; + dmah->vaddr = pci_alloc_consistent(dev->pdev, size, &dmah->busaddr); #if DRM_DEBUG_MEMORY - if (address == NULL) { + if (dmah->vaddr == NULL) { spin_lock(&drm_mem_lock); ++drm_mem_stats[area].fail_count; spin_unlock(&drm_mem_lock); + kfree(dmah); return NULL; } @@ -90,21 +96,25 @@ void *drm_pci_alloc(drm_device_t * dev, size_t size, size_t align, drm_ram_used += size; spin_unlock(&drm_mem_lock); #else - if (address == NULL) + if (dmah->vaddr == NULL) { + kfree(dmah); return NULL; + } #endif - memset(address, 0, size); + memset(dmah->vaddr, 0, size); - return address; + return dmah; } EXPORT_SYMBOL(drm_pci_alloc); /** - * \brief Free a PCI consistent memory block. + * \brief Free a PCI consistent memory block with freeing its descriptor. + * + * This function is for internal use in the Linux-specific DRM core code. */ void -drm_pci_free(drm_device_t * dev, size_t size, void *vaddr, dma_addr_t busaddr) +__drm_pci_free(drm_device_t * dev, drm_dma_handle_t *dmah) { #if DRM_DEBUG_MEMORY int area = DRM_MEM_DMA; @@ -112,12 +122,13 @@ drm_pci_free(drm_device_t * dev, size_t size, void *vaddr, dma_addr_t busaddr) int free_count; #endif - if (!vaddr) { + if (!dmah->vaddr) { #if DRM_DEBUG_MEMORY DRM_MEM_ERROR(area, "Attempt to free address 0\n"); #endif } else { - pci_free_consistent(dev->pdev, size, vaddr, busaddr); + pci_free_consistent(dev->pdev, dmah->size, dmah->vaddr, + dmah->busaddr); } #if DRM_DEBUG_MEMORY @@ -135,6 +146,16 @@ drm_pci_free(drm_device_t * dev, size_t size, void *vaddr, dma_addr_t busaddr) #endif } + +/** + * \brief Free a PCI consistent memory block + */ +void +drm_pci_free(drm_device_t *dev, drm_dma_handle_t *dmah) +{ + __drm_pci_free(dev, dmah); + kfree(dmah); +} EXPORT_SYMBOL(drm_pci_free); /*@}*/ diff --git a/drivers/char/drm/drm_vm.c b/drivers/char/drm/drm_vm.c index 644ec9dadc0..675d2397def 100644 --- a/drivers/char/drm/drm_vm.c +++ b/drivers/char/drm/drm_vm.c @@ -210,6 +210,8 @@ static void drm_vm_shm_close(struct vm_area_struct *vma) } if(!found_maps) { + drm_dma_handle_t dmah; + switch (map->type) { case _DRM_REGISTERS: case _DRM_FRAME_BUFFER: @@ -229,8 +231,10 @@ static void drm_vm_shm_close(struct vm_area_struct *vma) case _DRM_SCATTER_GATHER: break; case _DRM_CONSISTENT: - drm_pci_free(dev, map->size, map->handle, - map->offset); + dmah.vaddr = map->handle; + dmah.busaddr = map->offset; + dmah.size = map->size; + __drm_pci_free(dev, &dmah); break; } drm_free(map, sizeof(*map), DRM_MEM_MAPS); diff --git a/drivers/char/drm/i915_dma.c b/drivers/char/drm/i915_dma.c index acf9e52a950..759f22943eb 100644 --- a/drivers/char/drm/i915_dma.c +++ b/drivers/char/drm/i915_dma.c @@ -95,9 +95,8 @@ static int i915_dma_cleanup(drm_device_t * dev) drm_core_ioremapfree( &dev_priv->ring.map, dev); } - if (dev_priv->hw_status_page) { - drm_pci_free(dev, PAGE_SIZE, dev_priv->hw_status_page, - dev_priv->dma_status_page); + if (dev_priv->status_page_dmah) { + drm_pci_free(dev, dev_priv->status_page_dmah); /* Need to rewrite hardware status page */ I915_WRITE(0x02080, 0x1ffff000); } @@ -174,16 +173,18 @@ static int i915_initialize(drm_device_t * dev, dev_priv->allow_batchbuffer = 1; /* Program Hardware Status Page */ - dev_priv->hw_status_page = drm_pci_alloc(dev, PAGE_SIZE, PAGE_SIZE, - 0xffffffff, - &dev_priv->dma_status_page); + dev_priv->status_page_dmah = drm_pci_alloc(dev, PAGE_SIZE, PAGE_SIZE, + 0xffffffff); - if (!dev_priv->hw_status_page) { + if (!dev_priv->status_page_dmah) { dev->dev_private = (void *)dev_priv; i915_dma_cleanup(dev); DRM_ERROR("Can not allocate hardware status page\n"); return DRM_ERR(ENOMEM); } + dev_priv->hw_status_page = dev_priv->status_page_dmah->vaddr; + dev_priv->dma_status_page = dev_priv->status_page_dmah->busaddr; + memset(dev_priv->hw_status_page, 0, PAGE_SIZE); DRM_DEBUG("hw status page @ %p\n", dev_priv->hw_status_page); diff --git a/drivers/char/drm/i915_drv.h b/drivers/char/drm/i915_drv.h index 9c37d2367dd..93080868d18 100644 --- a/drivers/char/drm/i915_drv.h +++ b/drivers/char/drm/i915_drv.h @@ -79,9 +79,10 @@ typedef struct drm_i915_private { drm_i915_sarea_t *sarea_priv; drm_i915_ring_buffer_t ring; + drm_dma_handle_t *status_page_dmah; void *hw_status_page; - unsigned long counter; dma_addr_t dma_status_page; + unsigned long counter; int back_offset; int front_offset; -- cgit v1.2.3 From 7ab984012a879a53abb56abfe03b0c686f42b281 Mon Sep 17 00:00:00 2001 From: Dave Airlie Date: Sun, 10 Jul 2005 16:56:52 +1000 Subject: drm: update some function so a driver can call them This patch splits some ioctl functions so that they can be called in-kernel by a DRM driver. The driver will use them later. From: Ian Romanick Signed-off-by: Dave Airlie --- drivers/char/drm/drmP.h | 34 ++++++---- drivers/char/drm/drm_agpsupport.c | 135 ++++++++++++++++++++++---------------- drivers/char/drm/drm_bufs.c | 84 +++++++++++++++++------- drivers/char/drm/drm_drv.c | 15 +++-- 4 files changed, 167 insertions(+), 101 deletions(-) diff --git a/drivers/char/drm/drmP.h b/drivers/char/drm/drmP.h index 7e633a9ce93..d16d07e28b4 100644 --- a/drivers/char/drm/drmP.h +++ b/drivers/char/drm/drmP.h @@ -889,11 +889,16 @@ extern int drm_lock_free(drm_device_t *dev, unsigned int context); /* Buffer management support (drm_bufs.h) */ +extern int drm_addmap(drm_device_t *dev, unsigned int offset, + unsigned int size, drm_map_type_t type, + drm_map_flags_t flags, drm_map_t **map_ptr); +extern int drm_addmap_ioctl(struct inode *inode, struct file *filp, + unsigned int cmd, unsigned long arg); +extern int drm_rmmap(drm_device_t *dev, void *handle); +extern int drm_rmmap_ioctl(struct inode *inode, struct file *filp, + unsigned int cmd, unsigned long arg); + extern int drm_order( unsigned long size ); -extern int drm_addmap( struct inode *inode, struct file *filp, - unsigned int cmd, unsigned long arg ); -extern int drm_rmmap( struct inode *inode, struct file *filp, - unsigned int cmd, unsigned long arg ); extern int drm_addbufs( struct inode *inode, struct file *filp, unsigned int cmd, unsigned long arg ); extern int drm_infobufs( struct inode *inode, struct file *filp, @@ -927,15 +932,18 @@ extern void drm_vbl_send_signals( drm_device_t *dev ); /* AGP/GART support (drm_agpsupport.h) */ extern drm_agp_head_t *drm_agp_init(drm_device_t *dev); -extern int drm_agp_acquire(struct inode *inode, struct file *filp, - unsigned int cmd, unsigned long arg); -extern void drm_agp_do_release(drm_device_t *dev); -extern int drm_agp_release(struct inode *inode, struct file *filp, - unsigned int cmd, unsigned long arg); -extern int drm_agp_enable(struct inode *inode, struct file *filp, - unsigned int cmd, unsigned long arg); -extern int drm_agp_info(struct inode *inode, struct file *filp, - unsigned int cmd, unsigned long arg); +extern int drm_agp_acquire(drm_device_t * dev); +extern int drm_agp_acquire_ioctl(struct inode *inode, struct file *filp, + unsigned int cmd, unsigned long arg); +extern int drm_agp_release(drm_device_t *dev); +extern int drm_agp_release_ioctl(struct inode *inode, struct file *filp, + unsigned int cmd, unsigned long arg); +extern int drm_agp_enable(drm_device_t *dev, drm_agp_mode_t mode); +extern int drm_agp_enable_ioctl(struct inode *inode, struct file *filp, + unsigned int cmd, unsigned long arg); +extern int drm_agp_info(drm_device_t * dev, drm_agp_info_t *info); +extern int drm_agp_info_ioctl(struct inode *inode, struct file *filp, + unsigned int cmd, unsigned long arg); extern int drm_agp_alloc(struct inode *inode, struct file *filp, unsigned int cmd, unsigned long arg); extern int drm_agp_free(struct inode *inode, struct file *filp, diff --git a/drivers/char/drm/drm_agpsupport.c b/drivers/char/drm/drm_agpsupport.c index 8d94c0b5fa4..10c8b4daec5 100644 --- a/drivers/char/drm/drm_agpsupport.c +++ b/drivers/char/drm/drm_agpsupport.c @@ -37,7 +37,7 @@ #if __OS_HAS_AGP /** - * AGP information ioctl. + * Get AGP information. * * \param inode device inode. * \param filp file pointer. @@ -48,51 +48,56 @@ * Verifies the AGP device has been initialized and acquired and fills in the * drm_agp_info structure with the information in drm_agp_head::agp_info. */ -int drm_agp_info(struct inode *inode, struct file *filp, - unsigned int cmd, unsigned long arg) +int drm_agp_info(drm_device_t *dev, drm_agp_info_t *info) { - drm_file_t *priv = filp->private_data; - drm_device_t *dev = priv->head->dev; DRM_AGP_KERN *kern; - drm_agp_info_t info; if (!dev->agp || !dev->agp->acquired) return -EINVAL; kern = &dev->agp->agp_info; - info.agp_version_major = kern->version.major; - info.agp_version_minor = kern->version.minor; - info.mode = kern->mode; - info.aperture_base = kern->aper_base; - info.aperture_size = kern->aper_size * 1024 * 1024; - info.memory_allowed = kern->max_memory << PAGE_SHIFT; - info.memory_used = kern->current_memory << PAGE_SHIFT; - info.id_vendor = kern->device->vendor; - info.id_device = kern->device->device; - - if (copy_to_user((drm_agp_info_t __user *)arg, &info, sizeof(info))) + info->agp_version_major = kern->version.major; + info->agp_version_minor = kern->version.minor; + info->mode = kern->mode; + info->aperture_base = kern->aper_base; + info->aperture_size = kern->aper_size * 1024 * 1024; + info->memory_allowed = kern->max_memory << PAGE_SHIFT; + info->memory_used = kern->current_memory << PAGE_SHIFT; + info->id_vendor = kern->device->vendor; + info->id_device = kern->device->device; + + return 0; +} +EXPORT_SYMBOL(drm_agp_info); + +int drm_agp_info_ioctl(struct inode *inode, struct file *filp, + unsigned int cmd, unsigned long arg) +{ + drm_file_t *priv = filp->private_data; + drm_device_t *dev = priv->head->dev; + drm_agp_info_t info; + int err; + + err = drm_agp_info(dev, &info); + if (err) + return err; + + if (copy_to_user((drm_agp_info_t __user *) arg, &info, sizeof(info))) return -EFAULT; return 0; } /** - * Acquire the AGP device (ioctl). + * Acquire the AGP device. * - * \param inode device inode. - * \param filp file pointer. - * \param cmd command. - * \param arg user argument. + * \param dev DRM device that is to acquire AGP * \return zero on success or a negative number on failure. * * Verifies the AGP device hasn't been acquired before and calls - * agp_acquire(). + * \c agp_backend_acquire. */ -int drm_agp_acquire(struct inode *inode, struct file *filp, - unsigned int cmd, unsigned long arg) +int drm_agp_acquire(drm_device_t *dev) { - drm_file_t *priv = filp->private_data; - drm_device_t *dev = priv->head->dev; - if (!dev->agp) return -ENODEV; if (dev->agp->acquired) @@ -102,9 +107,10 @@ int drm_agp_acquire(struct inode *inode, struct file *filp, dev->agp->acquired = 1; return 0; } +EXPORT_SYMBOL(drm_agp_acquire); /** - * Release the AGP device (ioctl). + * Acquire the AGP device (ioctl). * * \param inode device inode. * \param filp file pointer. @@ -112,63 +118,80 @@ int drm_agp_acquire(struct inode *inode, struct file *filp, * \param arg user argument. * \return zero on success or a negative number on failure. * - * Verifies the AGP device has been acquired and calls agp_backend_release(). + * Verifies the AGP device hasn't been acquired before and calls + * \c agp_backend_acquire. */ -int drm_agp_release(struct inode *inode, struct file *filp, - unsigned int cmd, unsigned long arg) +int drm_agp_acquire_ioctl(struct inode *inode, struct file *filp, + unsigned int cmd, unsigned long arg) { - drm_file_t *priv = filp->private_data; - drm_device_t *dev = priv->head->dev; + drm_file_t *priv = filp->private_data; + + return drm_agp_acquire( (drm_device_t *) priv->head->dev ); +} +/** + * Release the AGP device. + * + * \param dev DRM device that is to release AGP + * \return zero on success or a negative number on failure. + * + * Verifies the AGP device has been acquired and calls \c agp_backend_release. + */ +int drm_agp_release(drm_device_t *dev) +{ if (!dev->agp || !dev->agp->acquired) return -EINVAL; agp_backend_release(dev->agp->bridge); dev->agp->acquired = 0; return 0; - } +EXPORT_SYMBOL(drm_agp_release); -/** - * Release the AGP device. - * - * Calls agp_backend_release(). - */ -void drm_agp_do_release(drm_device_t *dev) +int drm_agp_release_ioctl(struct inode *inode, struct file *filp, + unsigned int cmd, unsigned long arg) { - agp_backend_release(dev->agp->bridge); + drm_file_t *priv = filp->private_data; + drm_device_t *dev = priv->head->dev; + + return drm_agp_release(dev); } /** * Enable the AGP bus. * - * \param inode device inode. - * \param filp file pointer. - * \param cmd command. - * \param arg pointer to a drm_agp_mode structure. + * \param dev DRM device that has previously acquired AGP. + * \param mode Requested AGP mode. * \return zero on success or a negative number on failure. * * Verifies the AGP device has been acquired but not enabled, and calls - * agp_enable(). + * \c agp_enable. */ -int drm_agp_enable(struct inode *inode, struct file *filp, - unsigned int cmd, unsigned long arg) +int drm_agp_enable(drm_device_t *dev, drm_agp_mode_t mode) { - drm_file_t *priv = filp->private_data; - drm_device_t *dev = priv->head->dev; - drm_agp_mode_t mode; - if (!dev->agp || !dev->agp->acquired) return -EINVAL; - if (copy_from_user(&mode, (drm_agp_mode_t __user *)arg, sizeof(mode))) - return -EFAULT; - dev->agp->mode = mode.mode; agp_enable(dev->agp->bridge, mode.mode); dev->agp->base = dev->agp->agp_info.aper_base; dev->agp->enabled = 1; return 0; } +EXPORT_SYMBOL(drm_agp_enable); + +int drm_agp_enable_ioctl(struct inode *inode, struct file *filp, + unsigned int cmd, unsigned long arg) +{ + drm_file_t *priv = filp->private_data; + drm_device_t *dev = priv->head->dev; + drm_agp_mode_t mode; + + + if (copy_from_user(&mode, (drm_agp_mode_t __user *) arg, sizeof(mode))) + return -EFAULT; + + return drm_agp_enable(dev, mode); +} /** * Allocate AGP memory. diff --git a/drivers/char/drm/drm_bufs.c b/drivers/char/drm/drm_bufs.c index be54efbefe8..cd4636f7f18 100644 --- a/drivers/char/drm/drm_bufs.c +++ b/drivers/char/drm/drm_bufs.c @@ -82,26 +82,22 @@ static unsigned int map32_handle = 0x10000000; * type. Adds the map to the map list drm_device::maplist. Adds MTRR's where * applicable and if supported by the kernel. */ -int drm_addmap( struct inode *inode, struct file *filp, - unsigned int cmd, unsigned long arg ) +int drm_addmap(drm_device_t * dev, unsigned int offset, + unsigned int size, drm_map_type_t type, + drm_map_flags_t flags, drm_local_map_t ** map_ptr) { - drm_file_t *priv = filp->private_data; - drm_device_t *dev = priv->head->dev; drm_map_t *map; - drm_map_t __user *argp = (void __user *)arg; drm_map_list_t *list; drm_dma_handle_t *dmah; - if ( !(filp->f_mode & 3) ) return -EACCES; /* Require read/write */ - map = drm_alloc( sizeof(*map), DRM_MEM_MAPS ); if ( !map ) return -ENOMEM; - if ( copy_from_user( map, argp, sizeof(*map) ) ) { - drm_free( map, sizeof(*map), DRM_MEM_MAPS ); - return -EFAULT; - } + map->offset = offset; + map->size = size; + map->flags = flags; + map->type = type; /* Only allow shared memory to be removable since we only keep enough * book keeping information about shared memory to allow for removal @@ -218,10 +214,42 @@ int drm_addmap( struct inode *inode, struct file *filp, #endif up(&dev->struct_sem); - if ( copy_to_user( argp, map, sizeof(*map) ) ) + *map_ptr = map; + return 0; +} +EXPORT_SYMBOL(drm_addmap); + +int drm_addmap_ioctl(struct inode *inode, struct file *filp, + unsigned int cmd, unsigned long arg) +{ + drm_file_t *priv = filp->private_data; + drm_device_t *dev = priv->head->dev; + drm_map_t map; + drm_map_t *map_ptr; + drm_map_t __user *argp = (void __user *)arg; + int err; + + if (!(filp->f_mode & 3)) + return -EACCES; /* Require read/write */ + + if (copy_from_user(& map, argp, sizeof(map))) { return -EFAULT; - if (copy_to_user(&argp->handle, &map->offset, sizeof(map->offset))) + } + + err = drm_addmap( dev, map.offset, map.size, map.type, map.flags, + &map_ptr ); + + if (err) { + return err; + } + + if (copy_to_user(argp, map_ptr, sizeof(*map_ptr))) return -EFAULT; + if (map_ptr->type != _DRM_SHM) { + if (copy_to_user(&argp->handle, &map_ptr->offset, + sizeof(map_ptr->offset))) + return -EFAULT; + } return 0; } @@ -240,32 +268,23 @@ int drm_addmap( struct inode *inode, struct file *filp, * its being used, and free any associate resource (such as MTRR's) if it's not * being on use. * - * \sa addmap(). + * \sa drm_addmap */ -int drm_rmmap(struct inode *inode, struct file *filp, - unsigned int cmd, unsigned long arg) +int drm_rmmap(drm_device_t *dev, void *handle) { - drm_file_t *priv = filp->private_data; - drm_device_t *dev = priv->head->dev; struct list_head *list; drm_map_list_t *r_list = NULL; drm_vma_entry_t *pt, *prev; drm_map_t *map; - drm_map_t request; int found_maps = 0; - if (copy_from_user(&request, (drm_map_t __user *)arg, - sizeof(request))) { - return -EFAULT; - } - down(&dev->struct_sem); list = &dev->maplist->head; list_for_each(list, &dev->maplist->head) { r_list = list_entry(list, drm_map_list_t, head); if(r_list->map && - r_list->map->offset == (unsigned long) request.handle && + r_list->map->handle == handle && r_list->map->flags & _DRM_REMOVABLE) break; } @@ -319,6 +338,21 @@ int drm_rmmap(struct inode *inode, struct file *filp, up(&dev->struct_sem); return 0; } +EXPORT_SYMBOL(drm_rmmap); + +int drm_rmmap_ioctl(struct inode *inode, struct file *filp, + unsigned int cmd, unsigned long arg) +{ + drm_file_t *priv = filp->private_data; + drm_device_t *dev = priv->head->dev; + drm_map_t request; + + if (copy_from_user(&request, (drm_map_t __user *)arg, sizeof(request))) { + return -EFAULT; + } + + return drm_rmmap(dev, request.handle); +} /** * Cleanup after an error on one of the addbufs() functions. diff --git a/drivers/char/drm/drm_drv.c b/drivers/char/drm/drm_drv.c index ab172ea8e98..9b09b105e1d 100644 --- a/drivers/char/drm/drm_drv.c +++ b/drivers/char/drm/drm_drv.c @@ -70,8 +70,8 @@ static drm_ioctl_desc_t drm_ioctls[] = { [DRM_IOCTL_NR(DRM_IOCTL_UNBLOCK)] = { drm_noop, 1, 1 }, [DRM_IOCTL_NR(DRM_IOCTL_AUTH_MAGIC)] = { drm_authmagic, 1, 1 }, - [DRM_IOCTL_NR(DRM_IOCTL_ADD_MAP)] = { drm_addmap, 1, 1 }, - [DRM_IOCTL_NR(DRM_IOCTL_RM_MAP)] = { drm_rmmap, 1, 0 }, + [DRM_IOCTL_NR(DRM_IOCTL_ADD_MAP)] = { drm_addmap_ioctl,1, 1 }, + [DRM_IOCTL_NR(DRM_IOCTL_RM_MAP)] = { drm_rmmap_ioctl, 1, 0 }, [DRM_IOCTL_NR(DRM_IOCTL_SET_SAREA_CTX)] = { drm_setsareactx, 1, 1 }, [DRM_IOCTL_NR(DRM_IOCTL_GET_SAREA_CTX)] = { drm_getsareactx, 1, 0 }, @@ -102,10 +102,10 @@ static drm_ioctl_desc_t drm_ioctls[] = { [DRM_IOCTL_NR(DRM_IOCTL_CONTROL)] = { drm_control, 1, 1 }, #if __OS_HAS_AGP - [DRM_IOCTL_NR(DRM_IOCTL_AGP_ACQUIRE)] = { drm_agp_acquire, 1, 1 }, - [DRM_IOCTL_NR(DRM_IOCTL_AGP_RELEASE)] = { drm_agp_release, 1, 1 }, - [DRM_IOCTL_NR(DRM_IOCTL_AGP_ENABLE)] = { drm_agp_enable, 1, 1 }, - [DRM_IOCTL_NR(DRM_IOCTL_AGP_INFO)] = { drm_agp_info, 1, 0 }, + [DRM_IOCTL_NR(DRM_IOCTL_AGP_ACQUIRE)] = { drm_agp_acquire_ioctl, 1, 1 }, + [DRM_IOCTL_NR(DRM_IOCTL_AGP_RELEASE)] = { drm_agp_release_ioctl, 1, 1 }, + [DRM_IOCTL_NR(DRM_IOCTL_AGP_ENABLE)] = { drm_agp_enable_ioctl, 1, 1 }, + [DRM_IOCTL_NR(DRM_IOCTL_AGP_INFO)] = { drm_agp_info_ioctl, 1, 0 }, [DRM_IOCTL_NR(DRM_IOCTL_AGP_ALLOC)] = { drm_agp_alloc, 1, 1 }, [DRM_IOCTL_NR(DRM_IOCTL_AGP_FREE)] = { drm_agp_free, 1, 1 }, [DRM_IOCTL_NR(DRM_IOCTL_AGP_BIND)] = { drm_agp_bind, 1, 1 }, @@ -178,7 +178,8 @@ int drm_takedown( drm_device_t *dev ) } dev->agp->memory = NULL; - if ( dev->agp->acquired ) drm_agp_do_release(dev); + if (dev->agp->acquired) + drm_agp_release(dev); dev->agp->acquired = 0; dev->agp->enabled = 0; -- cgit v1.2.3 From aff138ab8ec340c23e7c6e1a95c1518ee832a8c6 Mon Sep 17 00:00:00 2001 From: Dave Airlie Date: Sun, 10 Jul 2005 16:58:40 +1000 Subject: drm: fix minor function header issue From: Ian Romanick Signed-off-by: Dave Airlie --- drivers/char/drm/drm_drv.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/char/drm/drm_drv.c b/drivers/char/drm/drm_drv.c index 9b09b105e1d..733af58fb3a 100644 --- a/drivers/char/drm/drm_drv.c +++ b/drivers/char/drm/drm_drv.c @@ -127,7 +127,7 @@ static drm_ioctl_desc_t drm_ioctls[] = { * * Frees every resource in \p dev. * - * \sa drm_device and setup(). + * \sa drm_device */ int drm_takedown( drm_device_t *dev ) { @@ -321,7 +321,7 @@ EXPORT_SYMBOL(drm_init); * * Cleans up all DRM device, calling takedown(). * - * \sa drm_init(). + * \sa drm_init */ static void drm_cleanup( drm_device_t *dev ) { -- cgit v1.2.3 From d84f76d37c5eebb94c48337958d5a2ff2965c02d Mon Sep 17 00:00:00 2001 From: Dave Airlie Date: Sun, 10 Jul 2005 17:04:22 +1000 Subject: drm: export symbols for use by drivers This just exports symbols for use in drivers. From: Ian Romanick Signed-off-by: Dave Airlie --- drivers/char/drm/drm_agpsupport.c | 1 + drivers/char/drm/drm_bufs.c | 2 ++ drivers/char/drm/drm_memory.c | 4 ++++ 3 files changed, 7 insertions(+) diff --git a/drivers/char/drm/drm_agpsupport.c b/drivers/char/drm/drm_agpsupport.c index 10c8b4daec5..d413da00329 100644 --- a/drivers/char/drm/drm_agpsupport.c +++ b/drivers/char/drm/drm_agpsupport.c @@ -459,6 +459,7 @@ int drm_agp_bind_memory(DRM_AGP_MEM *handle, off_t start) return -EINVAL; return agp_bind_memory(handle, start); } +EXPORT_SYMBOL(drm_agp_bind_memory); /** Calls agp_unbind_memory() */ int drm_agp_unbind_memory(DRM_AGP_MEM *handle) diff --git a/drivers/char/drm/drm_bufs.c b/drivers/char/drm/drm_bufs.c index cd4636f7f18..d0b1eb6ba6c 100644 --- a/drivers/char/drm/drm_bufs.c +++ b/drivers/char/drm/drm_bufs.c @@ -561,6 +561,7 @@ static int drm_addbufs_agp(drm_device_t *dev, drm_buf_desc_t *request) atomic_dec( &dev->buf_alloc ); return 0; } +EXPORT_SYMBOL(drm_addbufs_agp); #endif /* __OS_HAS_AGP */ static int drm_addbufs_pci(drm_device_t *dev, drm_buf_desc_t *request) @@ -781,6 +782,7 @@ static int drm_addbufs_pci(drm_device_t *dev, drm_buf_desc_t *request) return 0; } +EXPORT_SYMBOL(drm_addbufs_pci); static int drm_addbufs_sg(drm_device_t *dev, drm_buf_desc_t *request) { diff --git a/drivers/char/drm/drm_memory.c b/drivers/char/drm/drm_memory.c index ace3d42f440..ef66494b854 100644 --- a/drivers/char/drm/drm_memory.c +++ b/drivers/char/drm/drm_memory.c @@ -146,23 +146,27 @@ DRM_AGP_MEM *drm_alloc_agp(struct agp_bridge_data *bridge, int pages, u32 type) { return drm_agp_allocate_memory(bridge, pages, type); } +EXPORT_SYMBOL(drm_alloc_agp); /** Wrapper around agp_free_memory() */ int drm_free_agp(DRM_AGP_MEM *handle, int pages) { return drm_agp_free_memory(handle) ? 0 : -EINVAL; } +EXPORT_SYMBOL(drm_free_agp); /** Wrapper around agp_bind_memory() */ int drm_bind_agp(DRM_AGP_MEM *handle, unsigned int start) { return drm_agp_bind_memory(handle, start); } +EXPORT_SYMBOL(drm_bind_agp); /** Wrapper around agp_unbind_memory() */ int drm_unbind_agp(DRM_AGP_MEM *handle) { return drm_agp_unbind_memory(handle); } +EXPORT_SYMBOL(drm_unbind_agp); #endif /* agp */ #endif /* debug_memory */ -- cgit v1.2.3 From ceb9c27aa7d61c70f4c75f017d9fbc9de50034f1 Mon Sep 17 00:00:00 2001 From: Dave Airlie Date: Sun, 10 Jul 2005 17:07:23 +1000 Subject: drm: destatic exported function. Signed-off-by: Dave Airlie --- drivers/char/drm/drmP.h | 2 ++ drivers/char/drm/drm_bufs.c | 4 ++-- 2 files changed, 4 insertions(+), 2 deletions(-) diff --git a/drivers/char/drm/drmP.h b/drivers/char/drm/drmP.h index d16d07e28b4..8e060a2cc3d 100644 --- a/drivers/char/drm/drmP.h +++ b/drivers/char/drm/drmP.h @@ -889,6 +889,8 @@ extern int drm_lock_free(drm_device_t *dev, unsigned int context); /* Buffer management support (drm_bufs.h) */ +extern int drm_addbufs_agp(drm_device_t *dev, drm_buf_desc_t *request); +extern int drm_addbufs_pci(drm_device_t *dev, drm_buf_desc_t *request); extern int drm_addmap(drm_device_t *dev, unsigned int offset, unsigned int size, drm_map_type_t type, drm_map_flags_t flags, drm_map_t **map_ptr); diff --git a/drivers/char/drm/drm_bufs.c b/drivers/char/drm/drm_bufs.c index d0b1eb6ba6c..06b01215fdf 100644 --- a/drivers/char/drm/drm_bufs.c +++ b/drivers/char/drm/drm_bufs.c @@ -410,7 +410,7 @@ static void drm_cleanup_buf_error(drm_device_t *dev, drm_buf_entry_t *entry) * reallocates the buffer list of the same size order to accommodate the new * buffers. */ -static int drm_addbufs_agp(drm_device_t *dev, drm_buf_desc_t *request) +int drm_addbufs_agp(drm_device_t *dev, drm_buf_desc_t *request) { drm_device_dma_t *dma = dev->dma; drm_buf_entry_t *entry; @@ -564,7 +564,7 @@ static int drm_addbufs_agp(drm_device_t *dev, drm_buf_desc_t *request) EXPORT_SYMBOL(drm_addbufs_agp); #endif /* __OS_HAS_AGP */ -static int drm_addbufs_pci(drm_device_t *dev, drm_buf_desc_t *request) +int drm_addbufs_pci(drm_device_t *dev, drm_buf_desc_t *request) { drm_device_dma_t *dma = dev->dma; int count; -- cgit v1.2.3 From cda173806644d2af22ffd9896eed8ef99b97d356 Mon Sep 17 00:00:00 2001 From: Dave Airlie Date: Sun, 10 Jul 2005 17:31:26 +1000 Subject: drm: add test for AGP devices and driver override for it. Added device_is_agp callback to drm_driver. This function is called by the platform-specific drm_device_is_agp function. Added implementation of this function the the Linux-specific portion of the MGA driver to detect PCI G450 cards. Added code to the Linux-specific portion of the generic DRM layer to not initialize AGP infrastructure if the card is not AGP (this matches what already existed in BSD). Fix up i810/i830 and i915 drivers to always return AGP as they don't always report the capability. Fix the MGA to not report AGP for a card that has an AGP chip behind a PCI bridge. From: Ian Romanick, Dave Airlie, Alan Hourihane Signed-off-by: Dave Airlie --- drivers/char/drm/drmP.h | 28 ++++++++++++++++++++++++++++ drivers/char/drm/drm_stub.c | 3 ++- drivers/char/drm/i810_dma.c | 16 ++++++++++++++++ drivers/char/drm/i810_drv.c | 1 + drivers/char/drm/i810_drv.h | 1 + drivers/char/drm/i830_dma.c | 16 ++++++++++++++++ drivers/char/drm/i830_drv.c | 1 + drivers/char/drm/i830_drv.h | 1 + drivers/char/drm/i915_dma.c | 16 ++++++++++++++++ drivers/char/drm/i915_drv.c | 1 + drivers/char/drm/i915_drv.h | 1 + drivers/char/drm/mga_drv.c | 37 +++++++++++++++++++++++++++++++++++++ drivers/char/drm/mga_drv.h | 4 ++-- 13 files changed, 123 insertions(+), 3 deletions(-) diff --git a/drivers/char/drm/drmP.h b/drivers/char/drm/drmP.h index 8e060a2cc3d..a9b61864feb 100644 --- a/drivers/char/drm/drmP.h +++ b/drivers/char/drm/drmP.h @@ -586,7 +586,22 @@ struct drm_driver { int (*kernel_context_switch)(struct drm_device *dev, int old, int new); void (*kernel_context_switch_unlock)(struct drm_device *dev, drm_lock_t *lock); int (*vblank_wait)(struct drm_device *dev, unsigned int *sequence); + + /** + * Called by \c drm_device_is_agp. Typically used to determine if a + * card is really attached to AGP or not. + * + * \param dev DRM device handle + * + * \returns + * One of three values is returned depending on whether or not the + * card is absolutely \b not AGP (return of 0), absolutely \b is AGP + * (return of 1), or may or may not be AGP (return of 2). + */ + int (*device_is_agp) (struct drm_device * dev); + /* these have to be filled in */ + int (*postinit)(struct drm_device *, unsigned long flags); irqreturn_t (*irq_handler)( DRM_IRQ_ARGS ); void (*irq_preinstall)(struct drm_device *dev); @@ -1041,6 +1056,19 @@ static __inline__ struct drm_map *drm_core_findmap(struct drm_device *dev, unsig return NULL; } +static __inline__ int drm_device_is_agp(drm_device_t *dev) +{ + if ( dev->driver->device_is_agp != NULL ) { + int err = (*dev->driver->device_is_agp)( dev ); + + if (err != 2) { + return err; + } + } + + return pci_find_capability(dev->pdev, PCI_CAP_ID_AGP); +} + static __inline__ void drm_core_dropmap(struct drm_map *map) { } diff --git a/drivers/char/drm/drm_stub.c b/drivers/char/drm/drm_stub.c index 48829a1a086..068ca9a8b0b 100644 --- a/drivers/char/drm/drm_stub.c +++ b/drivers/char/drm/drm_stub.c @@ -91,7 +91,8 @@ static int drm_fill_in_dev(drm_device_t *dev, struct pci_dev *pdev, const struct goto error_out_unreg; if (drm_core_has_AGP(dev)) { - dev->agp = drm_agp_init(dev); + if (drm_device_is_agp(dev)) + dev->agp = drm_agp_init(dev); if (drm_core_check_feature(dev, DRIVER_REQUIRE_AGP) && (dev->agp == NULL)) { DRM_ERROR( "Cannot initialize the agpgart module.\n" ); retcode = -EINVAL; diff --git a/drivers/char/drm/i810_dma.c b/drivers/char/drm/i810_dma.c index 18e0b762289..0a9ac1f2e21 100644 --- a/drivers/char/drm/i810_dma.c +++ b/drivers/char/drm/i810_dma.c @@ -1383,3 +1383,19 @@ drm_ioctl_desc_t i810_ioctls[] = { }; int i810_max_ioctl = DRM_ARRAY_SIZE(i810_ioctls); + +/** + * Determine if the device really is AGP or not. + * + * All Intel graphics chipsets are treated as AGP, even if they are really + * PCI-e. + * + * \param dev The device to be tested. + * + * \returns + * A value of 1 is always retured to indictate every i810 is AGP. + */ +int i810_driver_device_is_agp(drm_device_t * dev) +{ + return 1; +} diff --git a/drivers/char/drm/i810_drv.c b/drivers/char/drm/i810_drv.c index ff51b3259af..00609329d57 100644 --- a/drivers/char/drm/i810_drv.c +++ b/drivers/char/drm/i810_drv.c @@ -84,6 +84,7 @@ static struct drm_driver driver = { .dev_priv_size = sizeof(drm_i810_buf_priv_t), .pretakedown = i810_driver_pretakedown, .prerelease = i810_driver_prerelease, + .device_is_agp = i810_driver_device_is_agp, .release = i810_driver_release, .dma_quiescent = i810_driver_dma_quiescent, .reclaim_buffers = i810_reclaim_buffers, diff --git a/drivers/char/drm/i810_drv.h b/drivers/char/drm/i810_drv.h index 1b40538d172..62ee4f58c59 100644 --- a/drivers/char/drm/i810_drv.h +++ b/drivers/char/drm/i810_drv.h @@ -120,6 +120,7 @@ extern int i810_driver_dma_quiescent(drm_device_t *dev); extern void i810_driver_release(drm_device_t *dev, struct file *filp); extern void i810_driver_pretakedown(drm_device_t *dev); extern void i810_driver_prerelease(drm_device_t *dev, DRMFILE filp); +extern int i810_driver_device_is_agp(drm_device_t * dev); #define I810_BASE(reg) ((unsigned long) \ dev_priv->mmio_map->handle) diff --git a/drivers/char/drm/i830_dma.c b/drivers/char/drm/i830_dma.c index dc773303586..80d8966397c 100644 --- a/drivers/char/drm/i830_dma.c +++ b/drivers/char/drm/i830_dma.c @@ -1586,3 +1586,19 @@ drm_ioctl_desc_t i830_ioctls[] = { }; int i830_max_ioctl = DRM_ARRAY_SIZE(i830_ioctls); + +/** + * Determine if the device really is AGP or not. + * + * All Intel graphics chipsets are treated as AGP, even if they are really + * PCI-e. + * + * \param dev The device to be tested. + * + * \returns + * A value of 1 is always retured to indictate every i8xx is AGP. + */ +int i830_driver_device_is_agp(drm_device_t * dev) +{ + return 1; +} diff --git a/drivers/char/drm/i830_drv.c b/drivers/char/drm/i830_drv.c index bc36be76b8b..0da9cd19919 100644 --- a/drivers/char/drm/i830_drv.c +++ b/drivers/char/drm/i830_drv.c @@ -88,6 +88,7 @@ static struct drm_driver driver = { .dev_priv_size = sizeof(drm_i830_buf_priv_t), .pretakedown = i830_driver_pretakedown, .prerelease = i830_driver_prerelease, + .device_is_agp = i830_driver_device_is_agp, .release = i830_driver_release, .dma_quiescent = i830_driver_dma_quiescent, .reclaim_buffers = i830_reclaim_buffers, diff --git a/drivers/char/drm/i830_drv.h b/drivers/char/drm/i830_drv.h index df7746131de..63f96a8b6a4 100644 --- a/drivers/char/drm/i830_drv.h +++ b/drivers/char/drm/i830_drv.h @@ -137,6 +137,7 @@ extern void i830_driver_pretakedown(drm_device_t *dev); extern void i830_driver_release(drm_device_t *dev, struct file *filp); extern int i830_driver_dma_quiescent(drm_device_t *dev); extern void i830_driver_prerelease(drm_device_t *dev, DRMFILE filp); +extern int i830_driver_device_is_agp(drm_device_t * dev); #define I830_BASE(reg) ((unsigned long) \ dev_priv->mmio_map->handle) diff --git a/drivers/char/drm/i915_dma.c b/drivers/char/drm/i915_dma.c index 759f22943eb..34f552f90c4 100644 --- a/drivers/char/drm/i915_dma.c +++ b/drivers/char/drm/i915_dma.c @@ -732,3 +732,19 @@ drm_ioctl_desc_t i915_ioctls[] = { }; int i915_max_ioctl = DRM_ARRAY_SIZE(i915_ioctls); + +/** + * Determine if the device really is AGP or not. + * + * All Intel graphics chipsets are treated as AGP, even if they are really + * PCI-e. + * + * \param dev The device to be tested. + * + * \returns + * A value of 1 is always retured to indictate every i9x5 is AGP. + */ +int i915_driver_device_is_agp(drm_device_t * dev) +{ + return 1; +} diff --git a/drivers/char/drm/i915_drv.c b/drivers/char/drm/i915_drv.c index 1f59d3fc79b..106b9ec0221 100644 --- a/drivers/char/drm/i915_drv.c +++ b/drivers/char/drm/i915_drv.c @@ -79,6 +79,7 @@ static struct drm_driver driver = { DRIVER_HAVE_IRQ | DRIVER_IRQ_SHARED, .pretakedown = i915_driver_pretakedown, .prerelease = i915_driver_prerelease, + .device_is_agp = i915_driver_device_is_agp, .irq_preinstall = i915_driver_irq_preinstall, .irq_postinstall = i915_driver_irq_postinstall, .irq_uninstall = i915_driver_irq_uninstall, diff --git a/drivers/char/drm/i915_drv.h b/drivers/char/drm/i915_drv.h index 93080868d18..70ed4e68eac 100644 --- a/drivers/char/drm/i915_drv.h +++ b/drivers/char/drm/i915_drv.h @@ -103,6 +103,7 @@ typedef struct drm_i915_private { extern void i915_kernel_lost_context(drm_device_t * dev); extern void i915_driver_pretakedown(drm_device_t *dev); extern void i915_driver_prerelease(drm_device_t *dev, DRMFILE filp); +extern int i915_driver_device_is_agp(drm_device_t *dev); /* i915_irq.c */ extern int i915_irq_emit(DRM_IOCTL_ARGS); diff --git a/drivers/char/drm/mga_drv.c b/drivers/char/drm/mga_drv.c index 844cca9cb29..94af13bc66a 100644 --- a/drivers/char/drm/mga_drv.c +++ b/drivers/char/drm/mga_drv.c @@ -38,6 +38,7 @@ #include "drm_pciids.h" +static int mga_driver_device_is_agp(drm_device_t * dev); static int postinit( struct drm_device *dev, unsigned long flags ) { dev->counters += 3; @@ -81,6 +82,7 @@ static struct drm_driver driver = { .driver_features = DRIVER_USE_AGP | DRIVER_REQUIRE_AGP | DRIVER_USE_MTRR | DRIVER_HAVE_DMA | DRIVER_HAVE_IRQ | DRIVER_IRQ_SHARED | DRIVER_IRQ_VBL, .pretakedown = mga_driver_pretakedown, .dma_quiescent = mga_driver_dma_quiescent, + .device_is_agp = mga_driver_device_is_agp, .vblank_wait = mga_driver_vblank_wait, .irq_preinstall = mga_driver_irq_preinstall, .irq_postinstall = mga_driver_irq_postinstall, @@ -128,3 +130,38 @@ module_exit(mga_exit); MODULE_AUTHOR( DRIVER_AUTHOR ); MODULE_DESCRIPTION( DRIVER_DESC ); MODULE_LICENSE("GPL and additional rights"); + +/** + * Determine if the device really is AGP or not. + * + * In addition to the usual tests performed by \c drm_device_is_agp, this + * function detects PCI G450 cards that appear to the system exactly like + * AGP G450 cards. + * + * \param dev The device to be tested. + * + * \returns + * If the device is a PCI G450, zero is returned. Otherwise 2 is returned. + */ +int mga_driver_device_is_agp(drm_device_t * dev) +{ + const struct pci_dev * const pdev = dev->pdev; + + + /* There are PCI versions of the G450. These cards have the + * same PCI ID as the AGP G450, but have an additional PCI-to-PCI + * bridge chip. We detect these cards, which are not currently + * supported by this driver, by looking at the device ID of the + * bus the "card" is on. If vendor is 0x3388 (Hint Corp) and the + * device is 0x0021 (HB6 Universal PCI-PCI bridge), we reject the + * device. + */ + + if ( (pdev->device == 0x0525) + && (pdev->bus->self->vendor == 0x3388) + && (pdev->bus->self->device == 0x0021) ) { + return 0; + } + + return 2; +} diff --git a/drivers/char/drm/mga_drv.h b/drivers/char/drm/mga_drv.h index 9412e2816eb..38f913905e0 100644 --- a/drivers/char/drm/mga_drv.h +++ b/drivers/char/drm/mga_drv.h @@ -38,11 +38,11 @@ #define DRIVER_NAME "mga" #define DRIVER_DESC "Matrox G200/G400" -#define DRIVER_DATE "20021029" +#define DRIVER_DATE "20051013" #define DRIVER_MAJOR 3 #define DRIVER_MINOR 1 -#define DRIVER_PATCHLEVEL 0 +#define DRIVER_PATCHLEVEL 1 typedef struct drm_mga_primary_buffer { u8 *start; -- cgit v1.2.3 From 93f453f3ffd8f4dbb0311b58b854e7655da3d601 Mon Sep 17 00:00:00 2001 From: Dave Airlie Date: Sun, 10 Jul 2005 17:45:34 +1000 Subject: drm: add new mga ids and types From: Ian Romanick Signed-off-by: Dave Airlie --- drivers/char/drm/drm_pciids.h | 7 ++++--- drivers/char/drm/mga_drm.h | 3 ++- 2 files changed, 6 insertions(+), 4 deletions(-) diff --git a/drivers/char/drm/drm_pciids.h b/drivers/char/drm/drm_pciids.h index 70ca4fa55c9..4f317ec092e 100644 --- a/drivers/char/drm/drm_pciids.h +++ b/drivers/char/drm/drm_pciids.h @@ -116,9 +116,10 @@ {0, 0, 0} #define mga_PCI_IDS \ - {0x102b, 0x0521, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, \ - {0x102b, 0x0525, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, \ - {0x102b, 0x2527, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, \ + {0x102b, 0x0520, PCI_ANY_ID, PCI_ANY_ID, 0, 0, MGA_CARD_TYPE_G200}, \ + {0x102b, 0x0521, PCI_ANY_ID, PCI_ANY_ID, 0, 0, MGA_CARD_TYPE_G200}, \ + {0x102b, 0x0525, PCI_ANY_ID, PCI_ANY_ID, 0, 0, MGA_CARD_TYPE_G400}, \ + {0x102b, 0x2527, PCI_ANY_ID, PCI_ANY_ID, 0, 0, MGA_CARD_TYPE_G550}, \ {0, 0, 0} #define mach64_PCI_IDS \ diff --git a/drivers/char/drm/mga_drm.h b/drivers/char/drm/mga_drm.h index 521d4451d01..4500e6e4920 100644 --- a/drivers/char/drm/mga_drm.h +++ b/drivers/char/drm/mga_drm.h @@ -73,7 +73,8 @@ #define MGA_CARD_TYPE_G200 1 #define MGA_CARD_TYPE_G400 2 - +#define MGA_CARD_TYPE_G450 3 /* not currently used */ +#define MGA_CARD_TYPE_G550 4 #define MGA_FRONT 0x1 #define MGA_BACK 0x2 -- cgit v1.2.3 From b5d499cfdeebcb71f00f3513045796ccae718140 Mon Sep 17 00:00:00 2001 From: Dave Airlie Date: Sun, 10 Jul 2005 18:17:42 +1000 Subject: drm: make drm_alloc_agp take a dev arg. Signed-off-by: Dave Airlie --- drivers/char/drm/drmP.h | 2 +- drivers/char/drm/drm_agpsupport.c | 2 +- drivers/char/drm/drm_memory.c | 4 ++-- 3 files changed, 4 insertions(+), 4 deletions(-) diff --git a/drivers/char/drm/drmP.h b/drivers/char/drm/drmP.h index a9b61864feb..a7fdcece612 100644 --- a/drivers/char/drm/drmP.h +++ b/drivers/char/drm/drmP.h @@ -829,7 +829,7 @@ extern void *drm_ioremap_nocache(unsigned long offset, unsigned long size, drm_device_t *dev); extern void drm_ioremapfree(void *pt, unsigned long size, drm_device_t *dev); -extern DRM_AGP_MEM *drm_alloc_agp(struct agp_bridge_data *bridge, int pages, u32 type); +extern DRM_AGP_MEM *drm_alloc_agp(drm_device_t *dev, int pages, u32 type); extern int drm_free_agp(DRM_AGP_MEM *handle, int pages); extern int drm_bind_agp(DRM_AGP_MEM *handle, unsigned int start); extern int drm_unbind_agp(DRM_AGP_MEM *handle); diff --git a/drivers/char/drm/drm_agpsupport.c b/drivers/char/drm/drm_agpsupport.c index d413da00329..ffb4acaefe8 100644 --- a/drivers/char/drm/drm_agpsupport.c +++ b/drivers/char/drm/drm_agpsupport.c @@ -229,7 +229,7 @@ int drm_agp_alloc(struct inode *inode, struct file *filp, pages = (request.size + PAGE_SIZE - 1) / PAGE_SIZE; type = (u32) request.type; - if (!(memory = drm_alloc_agp(dev->agp->bridge, pages, type))) { + if (!(memory = drm_alloc_agp(dev, pages, type))) { drm_free(entry, sizeof(*entry), DRM_MEM_AGPLISTS); return -ENOMEM; } diff --git a/drivers/char/drm/drm_memory.c b/drivers/char/drm/drm_memory.c index ef66494b854..ff483fb418a 100644 --- a/drivers/char/drm/drm_memory.c +++ b/drivers/char/drm/drm_memory.c @@ -142,9 +142,9 @@ void drm_free_pages(unsigned long address, int order, int area) #if __OS_HAS_AGP /** Wrapper around agp_allocate_memory() */ -DRM_AGP_MEM *drm_alloc_agp(struct agp_bridge_data *bridge, int pages, u32 type) +DRM_AGP_MEM *drm_alloc_agp(drm_device_t *dev, int pages, u32 type) { - return drm_agp_allocate_memory(bridge, pages, type); + return drm_agp_allocate_memory(dev->agp->bridge, pages, type); } EXPORT_SYMBOL(drm_alloc_agp); -- cgit v1.2.3 From 6795c985a648d1e90b367cc1387c18205ecca4b8 Mon Sep 17 00:00:00 2001 From: Dave Airlie Date: Sun, 10 Jul 2005 18:20:09 +1000 Subject: Add support for PCI MGA cards to MGA DRM. MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit This patch adds serveral new ioctls and a new query to get_param query to support PCI MGA cards. Two ioctls were added to implement interrupt based waiting. With this change, the client-side driver no longer needs to map the primary DMA region or the MMIO region. Previously, end-of-frame waiting was done by busy waiting in the client-side driver until one of the MMIO registers (the current DMA pointer) matched a pointer to the end of primary DMA space. By using interrupts, the busy waiting and the extra mappings are removed. A third ioctl was added to bootstrap DMA. This ioctl, which is used by the X-server, moves a *LOT* of code from the X-server into the kernel. This allows the kernel to do whatever needs to be done to setup DMA buffers. The entire process and the locations of the buffers are hidden from user-mode. Additionally, a get_param query was added to differentiate between G4x0 cards and G550 cards. A gap was left in the numbering sequence so that, if needed, G450 cards could be distinguished from G400 cards. According to Ville Syrjälä, the G4x0 cards and the G550 cards handle anisotropic filtering differently. This seems the most compatible way to let the client-side driver know which card it's own. Doing this very small change now eliminates the need to bump the DRM minor version twice. http://marc.theaimsgroup.com/?l=dri-devel&m=106625815319773&w=2 (airlied - this may not work at this point, I think the follow on buffer cleanup patches will be needed) From: Ian Romanick Signed-off-by: Dave Airlie --- drivers/char/drm/Kconfig | 2 +- drivers/char/drm/mga_dma.c | 601 +++++++++++++++++++++++++++++++++++-------- drivers/char/drm/mga_drm.h | 95 ++++++- drivers/char/drm/mga_drv.h | 96 +++++-- drivers/char/drm/mga_irq.c | 72 +++++- drivers/char/drm/mga_state.c | 158 ++++++++---- drivers/char/drm/mga_warp.c | 141 +++++----- 7 files changed, 888 insertions(+), 277 deletions(-) diff --git a/drivers/char/drm/Kconfig b/drivers/char/drm/Kconfig index 123417e4304..d6c50312aec 100644 --- a/drivers/char/drm/Kconfig +++ b/drivers/char/drm/Kconfig @@ -82,7 +82,7 @@ endchoice config DRM_MGA tristate "Matrox g200/g400" - depends on DRM && AGP + depends on DRM help Choose this option if you have a Matrox G200, G400 or G450 graphics card. If M is selected, the module will be called mga. AGP diff --git a/drivers/char/drm/mga_dma.c b/drivers/char/drm/mga_dma.c index 832eaf8a506..7899e281d06 100644 --- a/drivers/char/drm/mga_dma.c +++ b/drivers/char/drm/mga_dma.c @@ -23,18 +23,21 @@ * OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, * ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER * DEALINGS IN THE SOFTWARE. - * - * Authors: - * Rickard E. (Rik) Faith - * Jeff Hartmann - * Keith Whitwell - * - * Rewritten by: - * Gareth Hughes + */ + +/** + * \file mga_dma.c + * DMA support for MGA G200 / G400. + * + * \author Rickard E. (Rik) Faith + * \author Jeff Hartmann + * \author Keith Whitwell + * \author Gareth Hughes */ #include "drmP.h" #include "drm.h" +#include "drm_sarea.h" #include "mga_drm.h" #include "mga_drv.h" @@ -148,7 +151,7 @@ void mga_do_dma_flush( drm_mga_private_t *dev_priv ) DRM_DEBUG( " space = 0x%06x\n", primary->space ); mga_flush_write_combine(); - MGA_WRITE( MGA_PRIMEND, tail | MGA_PAGPXFER ); + MGA_WRITE(MGA_PRIMEND, tail | dev_priv->dma_access); DRM_DEBUG( "done.\n" ); } @@ -190,7 +193,7 @@ void mga_do_dma_wrap_start( drm_mga_private_t *dev_priv ) DRM_DEBUG( " space = 0x%06x\n", primary->space ); mga_flush_write_combine(); - MGA_WRITE( MGA_PRIMEND, tail | MGA_PAGPXFER ); + MGA_WRITE(MGA_PRIMEND, tail | dev_priv->dma_access); set_bit( 0, &primary->wrapped ); DRM_DEBUG( "done.\n" ); @@ -396,23 +399,383 @@ int mga_freelist_put( drm_device_t *dev, drm_buf_t *buf ) * DMA initialization, cleanup */ + +int mga_driver_preinit(drm_device_t *dev, unsigned long flags) +{ + drm_mga_private_t * dev_priv; + + dev_priv = drm_alloc(sizeof(drm_mga_private_t), DRM_MEM_DRIVER); + if (!dev_priv) + return DRM_ERR(ENOMEM); + + dev->dev_private = (void *)dev_priv; + memset(dev_priv, 0, sizeof(drm_mga_private_t)); + + dev_priv->usec_timeout = MGA_DEFAULT_USEC_TIMEOUT; + dev_priv->chipset = flags; + + return 0; +} + +/** + * Bootstrap the driver for AGP DMA. + * + * \todo + * Investigate whether there is any benifit to storing the WARP microcode in + * AGP memory. If not, the microcode may as well always be put in PCI + * memory. + * + * \todo + * This routine needs to set dma_bs->agp_mode to the mode actually configured + * in the hardware. Looking just at the Linux AGP driver code, I don't see + * an easy way to determine this. + * + * \sa mga_do_dma_bootstrap, mga_do_pci_dma_bootstrap + */ +static int mga_do_agp_dma_bootstrap(drm_device_t * dev, + drm_mga_dma_bootstrap_t * dma_bs) +{ + drm_mga_private_t * const dev_priv = (drm_mga_private_t *) dev->dev_private; + const unsigned int warp_size = mga_warp_microcode_size(dev_priv); + int err; + unsigned offset; + const unsigned secondary_size = dma_bs->secondary_bin_count + * dma_bs->secondary_bin_size; + const unsigned agp_size = (dma_bs->agp_size << 20); + drm_buf_desc_t req; + drm_agp_mode_t mode; + drm_agp_info_t info; + + + /* Acquire AGP. */ + err = drm_agp_acquire(dev); + if (err) { + DRM_ERROR("Unable to acquire AGP\n"); + return err; + } + + err = drm_agp_info(dev, &info); + if (err) { + DRM_ERROR("Unable to get AGP info\n"); + return err; + } + + mode.mode = (info.mode & ~0x07) | dma_bs->agp_mode; + err = drm_agp_enable(dev, mode); + if (err) { + DRM_ERROR("Unable to enable AGP (mode = 0x%lx)\n", mode.mode); + return err; + } + + + /* In addition to the usual AGP mode configuration, the G200 AGP cards + * need to have the AGP mode "manually" set. + */ + + if (dev_priv->chipset == MGA_CARD_TYPE_G200) { + if (mode.mode & 0x02) { + MGA_WRITE(MGA_AGP_PLL, MGA_AGP2XPLL_ENABLE); + } + else { + MGA_WRITE(MGA_AGP_PLL, MGA_AGP2XPLL_DISABLE); + } + } + + + /* Allocate and bind AGP memory. */ + dev_priv->agp_pages = agp_size / PAGE_SIZE; + dev_priv->agp_mem = drm_alloc_agp( dev, dev_priv->agp_pages, 0 ); + if (dev_priv->agp_mem == NULL) { + dev_priv->agp_pages = 0; + DRM_ERROR("Unable to allocate %uMB AGP memory\n", + dma_bs->agp_size); + return DRM_ERR(ENOMEM); + } + + err = drm_bind_agp( dev_priv->agp_mem, 0 ); + if (err) { + DRM_ERROR("Unable to bind AGP memory\n"); + return err; + } + + offset = 0; + err = drm_addmap( dev, offset, warp_size, + _DRM_AGP, _DRM_READ_ONLY, & dev_priv->warp ); + if (err) { + DRM_ERROR("Unable to map WARP microcode\n"); + return err; + } + + offset += warp_size; + err = drm_addmap( dev, offset, dma_bs->primary_size, + _DRM_AGP, _DRM_READ_ONLY, & dev_priv->primary ); + if (err) { + DRM_ERROR("Unable to map primary DMA region\n"); + return err; + } + + offset += dma_bs->primary_size; + err = drm_addmap( dev, offset, secondary_size, + _DRM_AGP, 0, & dev->agp_buffer_map ); + if (err) { + DRM_ERROR("Unable to map secondary DMA region\n"); + return err; + } + + (void) memset( &req, 0, sizeof(req) ); + req.count = dma_bs->secondary_bin_count; + req.size = dma_bs->secondary_bin_size; + req.flags = _DRM_AGP_BUFFER; + req.agp_start = offset; + + err = drm_addbufs_agp( dev, & req ); + if (err) { + DRM_ERROR("Unable to add secondary DMA buffers\n"); + return err; + } + + offset += secondary_size; + err = drm_addmap( dev, offset, agp_size - offset, + _DRM_AGP, 0, & dev_priv->agp_textures ); + if (err) { + DRM_ERROR("Unable to map AGP texture region\n"); + return err; + } + + drm_core_ioremap(dev_priv->warp, dev); + drm_core_ioremap(dev_priv->primary, dev); + drm_core_ioremap(dev->agp_buffer_map, dev); + + if (!dev_priv->warp->handle || + !dev_priv->primary->handle || !dev->agp_buffer_map->handle) { + DRM_ERROR("failed to ioremap agp regions! (%p, %p, %p)\n", + dev_priv->warp->handle, dev_priv->primary->handle, + dev->agp_buffer_map->handle); + return DRM_ERR(ENOMEM); + } + + dev_priv->dma_access = MGA_PAGPXFER; + dev_priv->wagp_enable = MGA_WAGP_ENABLE; + + DRM_INFO("Initialized card for AGP DMA.\n"); + return 0; +} + +/** + * Bootstrap the driver for PCI DMA. + * + * \todo + * The algorithm for decreasing the size of the primary DMA buffer could be + * better. The size should be rounded up to the nearest page size, then + * decrease the request size by a single page each pass through the loop. + * + * \todo + * Determine whether the maximum address passed to drm_pci_alloc is correct. + * The same goes for drm_addbufs_pci. + * + * \sa mga_do_dma_bootstrap, mga_do_agp_dma_bootstrap + */ +static int mga_do_pci_dma_bootstrap(drm_device_t * dev, + drm_mga_dma_bootstrap_t * dma_bs) +{ + drm_mga_private_t * const dev_priv = (drm_mga_private_t *) dev->dev_private; + const unsigned int warp_size = mga_warp_microcode_size(dev_priv); + unsigned int primary_size; + unsigned int bin_count; + int err; + drm_buf_desc_t req; + + + if (dev->dma == NULL) { + DRM_ERROR("dev->dma is NULL\n"); + return DRM_ERR(EFAULT); + } + + /* The proper alignment is 0x100 for this mapping */ + err = drm_addmap(dev, 0, warp_size, _DRM_CONSISTENT, + _DRM_READ_ONLY, &dev_priv->warp); + if (err != 0) { + DRM_ERROR("Unable to create mapping for WARP microcode\n"); + return err; + } + + /* Other than the bottom two bits being used to encode other + * information, there don't appear to be any restrictions on the + * alignment of the primary or secondary DMA buffers. + */ + + for ( primary_size = dma_bs->primary_size + ; primary_size != 0 + ; primary_size >>= 1 ) { + /* The proper alignment for this mapping is 0x04 */ + err = drm_addmap(dev, 0, primary_size, _DRM_CONSISTENT, + _DRM_READ_ONLY, &dev_priv->primary); + if (!err) + break; + } + + if (err != 0) { + DRM_ERROR("Unable to allocate primary DMA region\n"); + return DRM_ERR(ENOMEM); + } + + if (dev_priv->primary->size != dma_bs->primary_size) { + DRM_INFO("Primary DMA buffer size reduced from %u to %u.\n", + dma_bs->primary_size, + (unsigned) dev_priv->primary->size); + dma_bs->primary_size = dev_priv->primary->size; + } + + for ( bin_count = dma_bs->secondary_bin_count + ; bin_count > 0 + ; bin_count-- ) { + (void) memset( &req, 0, sizeof(req) ); + req.count = bin_count; + req.size = dma_bs->secondary_bin_size; + + err = drm_addbufs_pci( dev, & req ); + if (!err) { + break; + } + } + + if (bin_count == 0) { + DRM_ERROR("Unable to add secondary DMA buffers\n"); + return err; + } + + if (bin_count != dma_bs->secondary_bin_count) { + DRM_INFO("Secondary PCI DMA buffer bin count reduced from %u " + "to %u.\n", dma_bs->secondary_bin_count, bin_count); + + dma_bs->secondary_bin_count = bin_count; + } + + dev_priv->dma_access = 0; + dev_priv->wagp_enable = 0; + + dma_bs->agp_mode = 0; + + DRM_INFO("Initialized card for PCI DMA.\n"); + return 0; +} + + +static int mga_do_dma_bootstrap(drm_device_t * dev, + drm_mga_dma_bootstrap_t * dma_bs) +{ + const int is_agp = (dma_bs->agp_mode != 0) && drm_device_is_agp(dev); + int err; + drm_mga_private_t * const dev_priv = + (drm_mga_private_t *) dev->dev_private; + + + dev_priv->used_new_dma_init = 1; + + /* The first steps are the same for both PCI and AGP based DMA. Map + * the cards MMIO registers and map a status page. + */ + err = drm_addmap( dev, dev_priv->mmio_base, dev_priv->mmio_size, + _DRM_REGISTERS, _DRM_READ_ONLY, & dev_priv->mmio ); + if (err) { + DRM_ERROR("Unable to map MMIO region\n"); + return err; + } + + + err = drm_addmap( dev, 0, SAREA_MAX, _DRM_SHM, + _DRM_READ_ONLY | _DRM_LOCKED | _DRM_KERNEL, + & dev_priv->status ); + if (err) { + DRM_ERROR("Unable to map status region\n"); + return err; + } + + + /* The DMA initialization procedure is slightly different for PCI and + * AGP cards. AGP cards just allocate a large block of AGP memory and + * carve off portions of it for internal uses. The remaining memory + * is returned to user-mode to be used for AGP textures. + */ + + if (is_agp) { + err = mga_do_agp_dma_bootstrap(dev, dma_bs); + } + + /* If we attempted to initialize the card for AGP DMA but failed, + * clean-up any mess that may have been created. + */ + + if (err) { + mga_do_cleanup_dma(dev); + } + + + /* Not only do we want to try and initialized PCI cards for PCI DMA, + * but we also try to initialized AGP cards that could not be + * initialized for AGP DMA. This covers the case where we have an AGP + * card in a system with an unsupported AGP chipset. In that case the + * card will be detected as AGP, but we won't be able to allocate any + * AGP memory, etc. + */ + + if (!is_agp || err) { + err = mga_do_pci_dma_bootstrap(dev, dma_bs); + } + + + return err; +} + +int mga_dma_bootstrap(DRM_IOCTL_ARGS) +{ + DRM_DEVICE; + drm_mga_dma_bootstrap_t bootstrap; + int err; + + + DRM_COPY_FROM_USER_IOCTL(bootstrap, + (drm_mga_dma_bootstrap_t __user *) data, + sizeof(bootstrap)); + + err = mga_do_dma_bootstrap(dev, & bootstrap); + if (! err) { + static const int modes[] = { 0, 1, 2, 2, 4, 4, 4, 4 }; + const drm_mga_private_t * const dev_priv = + (drm_mga_private_t *) dev->dev_private; + + if (dev_priv->agp_textures != NULL) { + bootstrap.texture_handle = dev_priv->agp_textures->offset; + bootstrap.texture_size = dev_priv->agp_textures->size; + } + else { + bootstrap.texture_handle = 0; + bootstrap.texture_size = 0; + } + + bootstrap.agp_mode = modes[ bootstrap.agp_mode & 0x07 ]; + if (DRM_COPY_TO_USER( (void __user *) data, & bootstrap, + sizeof(bootstrap))) { + err = DRM_ERR(EFAULT); + } + } + else { + mga_do_cleanup_dma(dev); + } + + return err; +} + static int mga_do_init_dma( drm_device_t *dev, drm_mga_init_t *init ) { drm_mga_private_t *dev_priv; int ret; DRM_DEBUG( "\n" ); - dev_priv = drm_alloc( sizeof(drm_mga_private_t), DRM_MEM_DRIVER ); - if ( !dev_priv ) - return DRM_ERR(ENOMEM); - - memset( dev_priv, 0, sizeof(drm_mga_private_t) ); - dev_priv->chipset = init->chipset; + dev_priv = dev->dev_private; - dev_priv->usec_timeout = MGA_DEFAULT_USEC_TIMEOUT; - - if ( init->sgram ) { + if (init->sgram) { dev_priv->clear_cmd = MGA_DWGCTL_CLEAR | MGA_ATYPE_BLK; } else { dev_priv->clear_cmd = MGA_DWGCTL_CLEAR | MGA_ATYPE_RSTR; @@ -436,88 +799,65 @@ static int mga_do_init_dma( drm_device_t *dev, drm_mga_init_t *init ) DRM_GETSAREA(); - if(!dev_priv->sarea) { - DRM_ERROR( "failed to find sarea!\n" ); - /* Assign dev_private so we can do cleanup. */ - dev->dev_private = (void *)dev_priv; - mga_do_cleanup_dma( dev ); + if (!dev_priv->sarea) { + DRM_ERROR("failed to find sarea!\n"); return DRM_ERR(EINVAL); } - dev_priv->mmio = drm_core_findmap(dev, init->mmio_offset); - if(!dev_priv->mmio) { - DRM_ERROR( "failed to find mmio region!\n" ); - /* Assign dev_private so we can do cleanup. */ - dev->dev_private = (void *)dev_priv; - mga_do_cleanup_dma( dev ); - return DRM_ERR(EINVAL); - } - dev_priv->status = drm_core_findmap(dev, init->status_offset); - if(!dev_priv->status) { - DRM_ERROR( "failed to find status page!\n" ); - /* Assign dev_private so we can do cleanup. */ - dev->dev_private = (void *)dev_priv; - mga_do_cleanup_dma( dev ); - return DRM_ERR(EINVAL); - } - dev_priv->warp = drm_core_findmap(dev, init->warp_offset); - if(!dev_priv->warp) { - DRM_ERROR( "failed to find warp microcode region!\n" ); - /* Assign dev_private so we can do cleanup. */ - dev->dev_private = (void *)dev_priv; - mga_do_cleanup_dma( dev ); - return DRM_ERR(EINVAL); - } - dev_priv->primary = drm_core_findmap(dev, init->primary_offset); - if(!dev_priv->primary) { - DRM_ERROR( "failed to find primary dma region!\n" ); - /* Assign dev_private so we can do cleanup. */ - dev->dev_private = (void *)dev_priv; - mga_do_cleanup_dma( dev ); - return DRM_ERR(EINVAL); - } - dev->agp_buffer_map = drm_core_findmap(dev, init->buffers_offset); - if(!dev->agp_buffer_map) { - DRM_ERROR( "failed to find dma buffer region!\n" ); - /* Assign dev_private so we can do cleanup. */ - dev->dev_private = (void *)dev_priv; - mga_do_cleanup_dma( dev ); - return DRM_ERR(EINVAL); + if (! dev_priv->used_new_dma_init) { + dev_priv->status = drm_core_findmap(dev, init->status_offset); + if (!dev_priv->status) { + DRM_ERROR("failed to find status page!\n"); + return DRM_ERR(EINVAL); + } + dev_priv->mmio = drm_core_findmap(dev, init->mmio_offset); + if (!dev_priv->mmio) { + DRM_ERROR("failed to find mmio region!\n"); + return DRM_ERR(EINVAL); + } + dev_priv->warp = drm_core_findmap(dev, init->warp_offset); + if (!dev_priv->warp) { + DRM_ERROR("failed to find warp microcode region!\n"); + return DRM_ERR(EINVAL); + } + dev_priv->primary = drm_core_findmap(dev, init->primary_offset); + if (!dev_priv->primary) { + DRM_ERROR("failed to find primary dma region!\n"); + return DRM_ERR(EINVAL); + } + dev->agp_buffer_map = drm_core_findmap(dev, init->buffers_offset); + if (!dev->agp_buffer_map) { + DRM_ERROR("failed to find dma buffer region!\n"); + return DRM_ERR(EINVAL); + } + + drm_core_ioremap(dev_priv->warp, dev); + drm_core_ioremap(dev_priv->primary, dev); + drm_core_ioremap(dev->agp_buffer_map, dev); } dev_priv->sarea_priv = (drm_mga_sarea_t *)((u8 *)dev_priv->sarea->handle + init->sarea_priv_offset); - drm_core_ioremap( dev_priv->warp, dev ); - drm_core_ioremap( dev_priv->primary, dev ); - drm_core_ioremap( dev->agp_buffer_map, dev ); - - if(!dev_priv->warp->handle || - !dev_priv->primary->handle || - !dev->agp_buffer_map->handle ) { - DRM_ERROR( "failed to ioremap agp regions!\n" ); - /* Assign dev_private so we can do cleanup. */ - dev->dev_private = (void *)dev_priv; - mga_do_cleanup_dma( dev ); + if (!dev_priv->warp->handle || + !dev_priv->primary->handle || + ((dev_priv->dma_access != 0) && + ((dev->agp_buffer_map == NULL) || + (dev->agp_buffer_map->handle == NULL)))) { + DRM_ERROR("failed to ioremap agp regions!\n"); return DRM_ERR(ENOMEM); } - ret = mga_warp_install_microcode( dev_priv ); - if ( ret < 0 ) { - DRM_ERROR( "failed to install WARP ucode!\n" ); - /* Assign dev_private so we can do cleanup. */ - dev->dev_private = (void *)dev_priv; - mga_do_cleanup_dma( dev ); + ret = mga_warp_install_microcode(dev_priv); + if (ret < 0) { + DRM_ERROR("failed to install WARP ucode!\n"); return ret; } - ret = mga_warp_init( dev_priv ); - if ( ret < 0 ) { - DRM_ERROR( "failed to init WARP engine!\n" ); - /* Assign dev_private so we can do cleanup. */ - dev->dev_private = (void *)dev_priv; - mga_do_cleanup_dma( dev ); + ret = mga_warp_init(dev_priv); + if (ret < 0) { + DRM_ERROR("failed to init WARP engine!\n"); return ret; } @@ -557,22 +897,18 @@ static int mga_do_init_dma( drm_device_t *dev, drm_mga_init_t *init ) dev_priv->sarea_priv->last_frame.head = 0; dev_priv->sarea_priv->last_frame.wrap = 0; - if ( mga_freelist_init( dev, dev_priv ) < 0 ) { - DRM_ERROR( "could not initialize freelist\n" ); - /* Assign dev_private so we can do cleanup. */ - dev->dev_private = (void *)dev_priv; - mga_do_cleanup_dma( dev ); + if (mga_freelist_init(dev, dev_priv) < 0) { + DRM_ERROR("could not initialize freelist\n"); return DRM_ERR(ENOMEM); } - /* Make dev_private visable to others. */ - dev->dev_private = (void *)dev_priv; return 0; } static int mga_do_cleanup_dma( drm_device_t *dev ) { - DRM_DEBUG( "\n" ); + int err = 0; + DRM_DEBUG("\n"); /* Make sure interrupts are disabled here because the uninstall ioctl * may not have been called from userspace and after dev_private @@ -583,20 +919,49 @@ static int mga_do_cleanup_dma( drm_device_t *dev ) if ( dev->dev_private ) { drm_mga_private_t *dev_priv = dev->dev_private; - if ( dev_priv->warp != NULL ) - drm_core_ioremapfree( dev_priv->warp, dev ); - if ( dev_priv->primary != NULL ) - drm_core_ioremapfree( dev_priv->primary, dev ); - if ( dev->agp_buffer_map != NULL ) - drm_core_ioremapfree( dev->agp_buffer_map, dev ); + if ((dev_priv->warp != NULL) + && (dev_priv->mmio->type != _DRM_CONSISTENT)) + drm_core_ioremapfree(dev_priv->warp, dev); + + if ((dev_priv->primary != NULL) + && (dev_priv->primary->type != _DRM_CONSISTENT)) + drm_core_ioremapfree(dev_priv->primary, dev); - if ( dev_priv->head != NULL ) { - mga_freelist_cleanup( dev ); + if (dev->agp_buffer_map != NULL) + drm_core_ioremapfree(dev->agp_buffer_map, dev); + + if (dev_priv->used_new_dma_init) { + if (dev_priv->agp_mem != NULL) { + dev_priv->agp_textures = NULL; + drm_unbind_agp(dev_priv->agp_mem); + + drm_free_agp(dev_priv->agp_mem, dev_priv->agp_pages); + dev_priv->agp_pages = 0; + dev_priv->agp_mem = NULL; + } + + if ((dev->agp != NULL) && dev->agp->acquired) { + err = drm_agp_release(dev); + } + + dev_priv->used_new_dma_init = 0; } - drm_free( dev->dev_private, sizeof(drm_mga_private_t), - DRM_MEM_DRIVER ); - dev->dev_private = NULL; + dev_priv->warp = NULL; + dev_priv->primary = NULL; + dev_priv->mmio = NULL; + dev_priv->status = NULL; + dev_priv->sarea = NULL; + dev_priv->sarea_priv = NULL; + dev->agp_buffer_map = NULL; + + memset(&dev_priv->prim, 0, sizeof(dev_priv->prim)); + dev_priv->warp_pipe = 0; + memset(dev_priv->warp_pipe_phys, 0, sizeof(dev_priv->warp_pipe_phys)); + + if (dev_priv->head != NULL) { + mga_freelist_cleanup(dev); + } } return 0; @@ -606,14 +971,20 @@ int mga_dma_init( DRM_IOCTL_ARGS ) { DRM_DEVICE; drm_mga_init_t init; + int err; LOCK_TEST_WITH_RETURN( dev, filp ); - DRM_COPY_FROM_USER_IOCTL( init, (drm_mga_init_t __user *)data, sizeof(init) ); + DRM_COPY_FROM_USER_IOCTL(init, (drm_mga_init_t __user *) data, + sizeof(init)); switch ( init.func ) { case MGA_INIT_DMA: - return mga_do_init_dma( dev, &init ); + err = mga_do_init_dma(dev, &init); + if (err) { + (void) mga_do_cleanup_dma(dev); + } + return err; case MGA_CLEANUP_DMA: return mga_do_cleanup_dma( dev ); } @@ -742,7 +1113,21 @@ int mga_dma_buffers( DRM_IOCTL_ARGS ) return ret; } -void mga_driver_pretakedown(drm_device_t *dev) +/** + * Called just before the module is unloaded. + */ +int mga_driver_postcleanup(drm_device_t * dev) +{ + drm_free(dev->dev_private, sizeof(drm_mga_private_t), DRM_MEM_DRIVER); + dev->dev_private = NULL; + + return 0; +} + +/** + * Called when the last opener of the device is closed. + */ +void mga_driver_pretakedown(drm_device_t * dev) { mga_do_cleanup_dma( dev ); } diff --git a/drivers/char/drm/mga_drm.h b/drivers/char/drm/mga_drm.h index 4500e6e4920..2d8aa790379 100644 --- a/drivers/char/drm/mga_drm.h +++ b/drivers/char/drm/mga_drm.h @@ -226,10 +226,6 @@ typedef struct _drm_mga_sarea { } drm_mga_sarea_t; -/* WARNING: If you change any of these defines, make sure to change the - * defines in the Xserver file (xf86drmMga.h) - */ - /* MGA specific ioctls * The device specific ioctl range is 0x40 to 0x79. */ @@ -244,6 +240,14 @@ typedef struct _drm_mga_sarea { #define DRM_MGA_BLIT 0x08 #define DRM_MGA_GETPARAM 0x09 +/* 3.2: + * ioctls for operating on fences. + */ +#define DRM_MGA_SET_FENCE 0x0a +#define DRM_MGA_WAIT_FENCE 0x0b +#define DRM_MGA_DMA_BOOTSTRAP 0x0c + + #define DRM_IOCTL_MGA_INIT DRM_IOW( DRM_COMMAND_BASE + DRM_MGA_INIT, drm_mga_init_t) #define DRM_IOCTL_MGA_FLUSH DRM_IOW( DRM_COMMAND_BASE + DRM_MGA_FLUSH, drm_lock_t) #define DRM_IOCTL_MGA_RESET DRM_IO( DRM_COMMAND_BASE + DRM_MGA_RESET) @@ -254,6 +258,9 @@ typedef struct _drm_mga_sarea { #define DRM_IOCTL_MGA_ILOAD DRM_IOW( DRM_COMMAND_BASE + DRM_MGA_ILOAD, drm_mga_iload_t) #define DRM_IOCTL_MGA_BLIT DRM_IOW( DRM_COMMAND_BASE + DRM_MGA_BLIT, drm_mga_blit_t) #define DRM_IOCTL_MGA_GETPARAM DRM_IOWR(DRM_COMMAND_BASE + DRM_MGA_GETPARAM, drm_mga_getparam_t) +#define DRM_IOCTL_MGA_SET_FENCE DRM_IOW( DRM_COMMAND_BASE + DRM_MGA_SET_FENCE, uint32_t) +#define DRM_IOCTL_MGA_WAIT_FENCE DRM_IOWR(DRM_COMMAND_BASE + DRM_MGA_WAIT_FENCE, uint32_t) +#define DRM_IOCTL_MGA_DMA_BOOTSTRAP DRM_IOWR(DRM_COMMAND_BASE + DRM_MGA_DMA_BOOTSTRAP, drm_mga_dma_bootstrap_t) typedef struct _drm_mga_warp_index { int installed; @@ -292,12 +299,72 @@ typedef struct drm_mga_init { unsigned long buffers_offset; } drm_mga_init_t; -typedef struct drm_mga_fullscreen { - enum { - MGA_INIT_FULLSCREEN = 0x01, - MGA_CLEANUP_FULLSCREEN = 0x02 - } func; -} drm_mga_fullscreen_t; +typedef struct drm_mga_dma_bootstrap { + /** + * \name AGP texture region + * + * On return from the DRM_MGA_DMA_BOOTSTRAP ioctl, these fields will + * be filled in with the actual AGP texture settings. + * + * \warning + * If these fields are non-zero, but dma_mga_dma_bootstrap::agp_mode + * is zero, it means that PCI memory (most likely through the use of + * an IOMMU) is being used for "AGP" textures. + */ + /*@{*/ + drm_handle_t texture_handle; /**< Handle used to map AGP textures. */ + uint32_t texture_size; /**< Size of the AGP texture region. */ + /*@}*/ + + + /** + * Requested size of the primary DMA region. + * + * On return from the DRM_MGA_DMA_BOOTSTRAP ioctl, this field will be + * filled in with the actual AGP mode. If AGP was not available + */ + uint32_t primary_size; + + + /** + * Requested number of secondary DMA buffers. + * + * On return from the DRM_MGA_DMA_BOOTSTRAP ioctl, this field will be + * filled in with the actual number of secondary DMA buffers + * allocated. Particularly when PCI DMA is used, this may be + * (subtantially) less than the number requested. + */ + uint32_t secondary_bin_count; + + + /** + * Requested size of each secondary DMA buffer. + * + * While the kernel \b is free to reduce + * dma_mga_dma_bootstrap::secondary_bin_count, it is \b not allowed + * to reduce dma_mga_dma_bootstrap::secondary_bin_size. + */ + uint32_t secondary_bin_size; + + + /** + * Bit-wise mask of AGPSTAT2_* values. Currently only \c AGPSTAT2_1X, + * \c AGPSTAT2_2X, and \c AGPSTAT2_4X are supported. If this value is + * zero, it means that PCI DMA should be used, even if AGP is + * possible. + * + * On return from the DRM_MGA_DMA_BOOTSTRAP ioctl, this field will be + * filled in with the actual AGP mode. If AGP was not available + * (i.e., PCI DMA was used), this value will be zero. + */ + uint32_t agp_mode; + + + /** + * Desired AGP GART size, measured in megabytes. + */ + uint8_t agp_size; +} drm_mga_dma_bootstrap_t; typedef struct drm_mga_clear { unsigned int flags; @@ -342,6 +409,14 @@ typedef struct _drm_mga_blit { */ #define MGA_PARAM_IRQ_NR 1 +/* 3.2: Query the actual card type. The DDX only distinguishes between + * G200 chips and non-G200 chips, which it calls G400. It turns out that + * there are some very sublte differences between the G4x0 chips and the G550 + * chips. Using this parameter query, a client-side driver can detect the + * difference between a G4x0 and a G550. + */ +#define MGA_PARAM_CARD_TYPE 2 + typedef struct drm_mga_getparam { int param; void __user *value; diff --git a/drivers/char/drm/mga_drv.h b/drivers/char/drm/mga_drv.h index 38f913905e0..b22fdbd4f83 100644 --- a/drivers/char/drm/mga_drv.h +++ b/drivers/char/drm/mga_drv.h @@ -38,11 +38,11 @@ #define DRIVER_NAME "mga" #define DRIVER_DESC "Matrox G200/G400" -#define DRIVER_DATE "20051013" +#define DRIVER_DATE "20050607" #define DRIVER_MAJOR 3 -#define DRIVER_MINOR 1 -#define DRIVER_PATCHLEVEL 1 +#define DRIVER_MINOR 2 +#define DRIVER_PATCHLEVEL 0 typedef struct drm_mga_primary_buffer { u8 *start; @@ -87,9 +87,43 @@ typedef struct drm_mga_private { int chipset; int usec_timeout; + /** + * If set, the new DMA initialization sequence was used. This is + * primarilly used to select how the driver should uninitialized its + * internal DMA structures. + */ + int used_new_dma_init; + + /** + * If AGP memory is used for DMA buffers, this will be the value + * \c MGA_PAGPXFER. Otherwise, it will be zero (for a PCI transfer). + */ + u32 dma_access; + + /** + * If AGP memory is used for DMA buffers, this will be the value + * \c MGA_WAGP_ENABLE. Otherwise, it will be zero (for a PCI + * transfer). + */ + u32 wagp_enable; + + /** + * \name MMIO region parameters. + * + * \sa drm_mga_private_t::mmio + */ + /*@{*/ + u32 mmio_base; /**< Bus address of base of MMIO. */ + u32 mmio_size; /**< Size of the MMIO region. */ + /*@}*/ + u32 clear_cmd; u32 maccess; + wait_queue_head_t fence_queue; + atomic_t last_fence_retired; + u32 next_fence_to_post; + unsigned int fb_cpp; unsigned int front_offset; unsigned int front_pitch; @@ -108,35 +142,43 @@ typedef struct drm_mga_private { drm_local_map_t *status; drm_local_map_t *warp; drm_local_map_t *primary; - drm_local_map_t *buffers; drm_local_map_t *agp_textures; + + DRM_AGP_MEM *agp_mem; + unsigned int agp_pages; } drm_mga_private_t; /* mga_dma.c */ -extern int mga_dma_init( DRM_IOCTL_ARGS ); -extern int mga_dma_flush( DRM_IOCTL_ARGS ); -extern int mga_dma_reset( DRM_IOCTL_ARGS ); -extern int mga_dma_buffers( DRM_IOCTL_ARGS ); -extern void mga_driver_pretakedown(drm_device_t *dev); -extern int mga_driver_dma_quiescent(drm_device_t *dev); - -extern int mga_do_wait_for_idle( drm_mga_private_t *dev_priv ); - -extern void mga_do_dma_flush( drm_mga_private_t *dev_priv ); -extern void mga_do_dma_wrap_start( drm_mga_private_t *dev_priv ); -extern void mga_do_dma_wrap_end( drm_mga_private_t *dev_priv ); +extern int mga_driver_preinit(drm_device_t * dev, unsigned long flags); +extern int mga_dma_bootstrap(DRM_IOCTL_ARGS); +extern int mga_dma_init(DRM_IOCTL_ARGS); +extern int mga_dma_flush(DRM_IOCTL_ARGS); +extern int mga_dma_reset(DRM_IOCTL_ARGS); +extern int mga_dma_buffers(DRM_IOCTL_ARGS); +extern int mga_driver_postcleanup(drm_device_t * dev); +extern void mga_driver_pretakedown(drm_device_t * dev); +extern int mga_driver_dma_quiescent(drm_device_t * dev); + +extern int mga_do_wait_for_idle(drm_mga_private_t * dev_priv); + +extern void mga_do_dma_flush(drm_mga_private_t * dev_priv); +extern void mga_do_dma_wrap_start(drm_mga_private_t * dev_priv); +extern void mga_do_dma_wrap_end(drm_mga_private_t * dev_priv); extern int mga_freelist_put( drm_device_t *dev, drm_buf_t *buf ); /* mga_warp.c */ -extern int mga_warp_install_microcode( drm_mga_private_t *dev_priv ); -extern int mga_warp_init( drm_mga_private_t *dev_priv ); - -extern int mga_driver_vblank_wait(drm_device_t *dev, unsigned int *sequence); -extern irqreturn_t mga_driver_irq_handler( DRM_IRQ_ARGS ); -extern void mga_driver_irq_preinstall( drm_device_t *dev ); -extern void mga_driver_irq_postinstall( drm_device_t *dev ); -extern void mga_driver_irq_uninstall( drm_device_t *dev ); +extern unsigned int mga_warp_microcode_size(const drm_mga_private_t * dev_priv); +extern int mga_warp_install_microcode(drm_mga_private_t * dev_priv); +extern int mga_warp_init(drm_mga_private_t * dev_priv); + + /* mga_irq.c */ +extern int mga_driver_fence_wait(drm_device_t * dev, unsigned int *sequence); +extern int mga_driver_vblank_wait(drm_device_t * dev, unsigned int *sequence); +extern irqreturn_t mga_driver_irq_handler(DRM_IRQ_ARGS); +extern void mga_driver_irq_preinstall(drm_device_t * dev); +extern void mga_driver_irq_postinstall(drm_device_t * dev); +extern void mga_driver_irq_uninstall(drm_device_t * dev); extern long mga_compat_ioctl(struct file *filp, unsigned int cmd, unsigned long arg); @@ -527,6 +569,12 @@ do { \ */ #define MGA_EXEC 0x0100 +/* AGP PLL encoding (for G200 only). + */ +#define MGA_AGP_PLL 0x1e4c +# define MGA_AGP2XPLL_DISABLE (0 << 0) +# define MGA_AGP2XPLL_ENABLE (1 << 0) + /* Warp registers */ #define MGA_WR0 0x2d00 diff --git a/drivers/char/drm/mga_irq.c b/drivers/char/drm/mga_irq.c index bc0b6b5d43a..52eaa4e788f 100644 --- a/drivers/char/drm/mga_irq.c +++ b/drivers/char/drm/mga_irq.c @@ -41,15 +41,40 @@ irqreturn_t mga_driver_irq_handler( DRM_IRQ_ARGS ) drm_mga_private_t *dev_priv = (drm_mga_private_t *)dev->dev_private; int status; + int handled = 0; + + status = MGA_READ(MGA_STATUS); - status = MGA_READ( MGA_STATUS ); - /* VBLANK interrupt */ if ( status & MGA_VLINEPEN ) { MGA_WRITE( MGA_ICLEAR, MGA_VLINEICLR ); atomic_inc(&dev->vbl_received); DRM_WAKEUP(&dev->vbl_queue); - drm_vbl_send_signals( dev ); + drm_vbl_send_signals(dev); + handled = 1; + } + + /* SOFTRAP interrupt */ + if (status & MGA_SOFTRAPEN) { + const u32 prim_start = MGA_READ(MGA_PRIMADDRESS); + const u32 prim_end = MGA_READ(MGA_PRIMEND); + + + MGA_WRITE(MGA_ICLEAR, MGA_SOFTRAPICLR); + + /* In addition to clearing the interrupt-pending bit, we + * have to write to MGA_PRIMEND to re-start the DMA operation. + */ + if ( (prim_start & ~0x03) != (prim_end & ~0x03) ) { + MGA_WRITE(MGA_PRIMEND, prim_end); + } + + atomic_inc(&dev_priv->last_fence_retired); + DRM_WAKEUP(&dev_priv->fence_queue); + handled = 1; + } + + if ( handled ) { return IRQ_HANDLED; } return IRQ_NONE; @@ -73,9 +98,28 @@ int mga_driver_vblank_wait(drm_device_t *dev, unsigned int *sequence) return ret; } -void mga_driver_irq_preinstall( drm_device_t *dev ) { - drm_mga_private_t *dev_priv = - (drm_mga_private_t *)dev->dev_private; +int mga_driver_fence_wait(drm_device_t * dev, unsigned int *sequence) +{ + drm_mga_private_t *dev_priv = (drm_mga_private_t *) dev->dev_private; + unsigned int cur_fence; + int ret = 0; + + /* Assume that the user has missed the current sequence number + * by about a day rather than she wants to wait for years + * using fences. + */ + DRM_WAIT_ON(ret, dev_priv->fence_queue, 3 * DRM_HZ, + (((cur_fence = atomic_read(&dev_priv->last_fence_retired)) + - *sequence) <= (1 << 23))); + + *sequence = cur_fence; + + return ret; +} + +void mga_driver_irq_preinstall(drm_device_t * dev) +{ + drm_mga_private_t *dev_priv = (drm_mga_private_t *) dev->dev_private; /* Disable *all* interrupts */ MGA_WRITE( MGA_IEN, 0 ); @@ -83,12 +127,14 @@ void mga_driver_irq_preinstall( drm_device_t *dev ) { MGA_WRITE( MGA_ICLEAR, ~0 ); } -void mga_driver_irq_postinstall( drm_device_t *dev ) { - drm_mga_private_t *dev_priv = - (drm_mga_private_t *)dev->dev_private; +void mga_driver_irq_postinstall(drm_device_t * dev) +{ + drm_mga_private_t *dev_priv = (drm_mga_private_t *) dev->dev_private; + + DRM_INIT_WAITQUEUE( &dev_priv->fence_queue ); - /* Turn on VBL interrupt */ - MGA_WRITE( MGA_IEN, MGA_VLINEIEN ); + /* Turn on vertical blank interrupt and soft trap interrupt. */ + MGA_WRITE(MGA_IEN, MGA_VLINEIEN | MGA_SOFTRAPEN); } void mga_driver_irq_uninstall( drm_device_t *dev ) { @@ -98,5 +144,7 @@ void mga_driver_irq_uninstall( drm_device_t *dev ) { return; /* Disable *all* interrupts */ - MGA_WRITE( MGA_IEN, 0 ); + MGA_WRITE(MGA_IEN, 0); + + dev->irq_enabled = 0; } diff --git a/drivers/char/drm/mga_state.c b/drivers/char/drm/mga_state.c index 3c7a8f5ba50..05bbb471937 100644 --- a/drivers/char/drm/mga_state.c +++ b/drivers/char/drm/mga_state.c @@ -53,16 +53,16 @@ static void mga_emit_clip_rect( drm_mga_private_t *dev_priv, /* Force reset of DWGCTL on G400 (eliminates clip disable bit). */ - if ( dev_priv->chipset == MGA_CARD_TYPE_G400 ) { - DMA_BLOCK( MGA_DWGCTL, ctx->dwgctl, - MGA_LEN + MGA_EXEC, 0x80000000, - MGA_DWGCTL, ctx->dwgctl, - MGA_LEN + MGA_EXEC, 0x80000000 ); + if (dev_priv->chipset == MGA_CARD_TYPE_G400) { + DMA_BLOCK(MGA_DWGCTL, ctx->dwgctl, + MGA_LEN + MGA_EXEC, 0x80000000, + MGA_DWGCTL, ctx->dwgctl, + MGA_LEN + MGA_EXEC, 0x80000000); } - DMA_BLOCK( MGA_DMAPAD, 0x00000000, - MGA_CXBNDRY, (box->x2 << 16) | box->x1, - MGA_YTOP, box->y1 * pitch, - MGA_YBOT, box->y2 * pitch ); + DMA_BLOCK(MGA_DMAPAD, 0x00000000, + MGA_CXBNDRY, ((box->x2 - 1) << 16) | box->x1, + MGA_YTOP, box->y1 * pitch, + MGA_YBOT, (box->y2 - 1) * pitch); ADVANCE_DMA(); } @@ -260,12 +260,11 @@ static __inline__ void mga_g200_emit_pipe( drm_mga_private_t *dev_priv ) /* Padding required to to hardware bug. */ - DMA_BLOCK( MGA_DMAPAD, 0xffffffff, - MGA_DMAPAD, 0xffffffff, - MGA_DMAPAD, 0xffffffff, - MGA_WIADDR, (dev_priv->warp_pipe_phys[pipe] | - MGA_WMODE_START | - MGA_WAGP_ENABLE) ); + DMA_BLOCK(MGA_DMAPAD, 0xffffffff, + MGA_DMAPAD, 0xffffffff, + MGA_DMAPAD, 0xffffffff, + MGA_WIADDR, (dev_priv->warp_pipe_phys[pipe] | + MGA_WMODE_START | dev_priv->wagp_enable)); ADVANCE_DMA(); } @@ -342,12 +341,11 @@ static __inline__ void mga_g400_emit_pipe( drm_mga_private_t *dev_priv ) MGA_WR60, MGA_G400_WR_MAGIC ); /* tex1 height */ /* Padding required to to hardware bug */ - DMA_BLOCK( MGA_DMAPAD, 0xffffffff, - MGA_DMAPAD, 0xffffffff, - MGA_DMAPAD, 0xffffffff, - MGA_WIADDR2, (dev_priv->warp_pipe_phys[pipe] | - MGA_WMODE_START | - MGA_WAGP_ENABLE) ); + DMA_BLOCK(MGA_DMAPAD, 0xffffffff, + MGA_DMAPAD, 0xffffffff, + MGA_DMAPAD, 0xffffffff, + MGA_WIADDR2, (dev_priv->warp_pipe_phys[pipe] | + MGA_WMODE_START | dev_priv->wagp_enable)); ADVANCE_DMA(); } @@ -459,9 +457,9 @@ static int mga_verify_state( drm_mga_private_t *dev_priv ) if ( dirty & MGA_UPLOAD_TEX0 ) ret |= mga_verify_tex( dev_priv, 0 ); - if ( dev_priv->chipset == MGA_CARD_TYPE_G400 ) { - if ( dirty & MGA_UPLOAD_TEX1 ) - ret |= mga_verify_tex( dev_priv, 1 ); + if (dev_priv->chipset >= MGA_CARD_TYPE_G400) { + if (dirty & MGA_UPLOAD_TEX1) + ret |= mga_verify_tex(dev_priv, 1); if ( dirty & MGA_UPLOAD_PIPE ) ret |= ( sarea_priv->warp_pipe > MGA_MAX_G400_PIPES ); @@ -686,12 +684,12 @@ static void mga_dma_dispatch_vertex( drm_device_t *dev, drm_buf_t *buf ) BEGIN_DMA( 1 ); - DMA_BLOCK( MGA_DMAPAD, 0x00000000, - MGA_DMAPAD, 0x00000000, - MGA_SECADDRESS, (address | - MGA_DMA_VERTEX), - MGA_SECEND, ((address + length) | - MGA_PAGPXFER) ); + DMA_BLOCK(MGA_DMAPAD, 0x00000000, + MGA_DMAPAD, 0x00000000, + MGA_SECADDRESS, (address | + MGA_DMA_VERTEX), + MGA_SECEND, ((address + length) | + dev_priv->dma_access)); ADVANCE_DMA(); } while ( ++i < sarea_priv->nbox ); @@ -733,11 +731,11 @@ static void mga_dma_dispatch_indices( drm_device_t *dev, drm_buf_t *buf, BEGIN_DMA( 1 ); - DMA_BLOCK( MGA_DMAPAD, 0x00000000, - MGA_DMAPAD, 0x00000000, - MGA_SETUPADDRESS, address + start, - MGA_SETUPEND, ((address + end) | - MGA_PAGPXFER) ); + DMA_BLOCK(MGA_DMAPAD, 0x00000000, + MGA_DMAPAD, 0x00000000, + MGA_SETUPADDRESS, address + start, + MGA_SETUPEND, ((address + end) | + dev_priv->dma_access)); ADVANCE_DMA(); } while ( ++i < sarea_priv->nbox ); @@ -764,7 +762,7 @@ static void mga_dma_dispatch_iload( drm_device_t *dev, drm_buf_t *buf, drm_mga_private_t *dev_priv = dev->dev_private; drm_mga_buf_priv_t *buf_priv = buf->dev_private; drm_mga_context_regs_t *ctx = &dev_priv->sarea_priv->context_state; - u32 srcorg = buf->bus_address | MGA_SRCACC_AGP | MGA_SRCMAP_SYSMEM; + u32 srcorg = buf->bus_address | dev_priv->dma_access | MGA_SRCMAP_SYSMEM; u32 y2; DMA_LOCALS; DRM_DEBUG( "buf=%d used=%d\n", buf->idx, buf->used ); @@ -1095,6 +1093,9 @@ static int mga_getparam( DRM_IOCTL_ARGS ) case MGA_PARAM_IRQ_NR: value = dev->irq; break; + case MGA_PARAM_CARD_TYPE: + value = dev_priv->chipset; + break; default: return DRM_ERR(EINVAL); } @@ -1107,17 +1108,82 @@ static int mga_getparam( DRM_IOCTL_ARGS ) return 0; } +static int mga_set_fence(DRM_IOCTL_ARGS) +{ + DRM_DEVICE; + drm_mga_private_t *dev_priv = dev->dev_private; + u32 temp; + DMA_LOCALS; + + if (!dev_priv) { + DRM_ERROR("%s called with no initialization\n", __FUNCTION__); + return DRM_ERR(EINVAL); + } + + DRM_DEBUG("pid=%d\n", DRM_CURRENTPID); + + /* I would normal do this assignment in the declaration of temp, + * but dev_priv may be NULL. + */ + + temp = dev_priv->next_fence_to_post; + dev_priv->next_fence_to_post++; + + BEGIN_DMA(1); + DMA_BLOCK(MGA_DMAPAD, 0x00000000, + MGA_DMAPAD, 0x00000000, + MGA_DMAPAD, 0x00000000, + MGA_SOFTRAP, 0x00000000); + ADVANCE_DMA(); + + if (DRM_COPY_TO_USER( (u32 __user *) data, & temp, sizeof(u32))) { + DRM_ERROR("copy_to_user\n"); + return DRM_ERR(EFAULT); + } + + return 0; +} + +static int mga_wait_fence(DRM_IOCTL_ARGS) +{ + DRM_DEVICE; + drm_mga_private_t *dev_priv = dev->dev_private; + u32 fence; + + if (!dev_priv) { + DRM_ERROR("%s called with no initialization\n", __FUNCTION__); + return DRM_ERR(EINVAL); + } + + DRM_COPY_FROM_USER_IOCTL(fence, (u32 __user *) data, sizeof(u32)); + + DRM_DEBUG("pid=%d\n", DRM_CURRENTPID); + + mga_driver_fence_wait(dev, & fence); + + if (DRM_COPY_TO_USER( (u32 __user *) data, & fence, sizeof(u32))) { + DRM_ERROR("copy_to_user\n"); + return DRM_ERR(EFAULT); + } + + return 0; +} + drm_ioctl_desc_t mga_ioctls[] = { - [DRM_IOCTL_NR(DRM_MGA_INIT)] = { mga_dma_init, 1, 1 }, - [DRM_IOCTL_NR(DRM_MGA_FLUSH)] = { mga_dma_flush, 1, 0 }, - [DRM_IOCTL_NR(DRM_MGA_RESET)] = { mga_dma_reset, 1, 0 }, - [DRM_IOCTL_NR(DRM_MGA_SWAP)] = { mga_dma_swap, 1, 0 }, - [DRM_IOCTL_NR(DRM_MGA_CLEAR)] = { mga_dma_clear, 1, 0 }, - [DRM_IOCTL_NR(DRM_MGA_VERTEX)] = { mga_dma_vertex, 1, 0 }, - [DRM_IOCTL_NR(DRM_MGA_INDICES)] = { mga_dma_indices, 1, 0 }, - [DRM_IOCTL_NR(DRM_MGA_ILOAD)] = { mga_dma_iload, 1, 0 }, - [DRM_IOCTL_NR(DRM_MGA_BLIT)] = { mga_dma_blit, 1, 0 }, - [DRM_IOCTL_NR(DRM_MGA_GETPARAM)]= { mga_getparam, 1, 0 }, + [DRM_IOCTL_NR(DRM_MGA_INIT)] = {mga_dma_init, 1, 1}, + [DRM_IOCTL_NR(DRM_MGA_FLUSH)] = {mga_dma_flush, 1, 0}, + [DRM_IOCTL_NR(DRM_MGA_RESET)] = {mga_dma_reset, 1, 0}, + [DRM_IOCTL_NR(DRM_MGA_SWAP)] = {mga_dma_swap, 1, 0}, + [DRM_IOCTL_NR(DRM_MGA_CLEAR)] = {mga_dma_clear, 1, 0}, + [DRM_IOCTL_NR(DRM_MGA_VERTEX)] = {mga_dma_vertex, 1, 0}, + [DRM_IOCTL_NR(DRM_MGA_INDICES)] = {mga_dma_indices, 1, 0}, + [DRM_IOCTL_NR(DRM_MGA_ILOAD)] = {mga_dma_iload, 1, 0}, + [DRM_IOCTL_NR(DRM_MGA_BLIT)] = {mga_dma_blit, 1, 0}, + [DRM_IOCTL_NR(DRM_MGA_GETPARAM)] = {mga_getparam, 1, 0}, + [DRM_IOCTL_NR(DRM_MGA_SET_FENCE)] = {mga_set_fence, 1, 0}, + [DRM_IOCTL_NR(DRM_MGA_WAIT_FENCE)] = {mga_wait_fence, 1, 0}, + [DRM_IOCTL_NR(DRM_MGA_DMA_BOOTSTRAP)] = {mga_dma_bootstrap, 1, 1}, + }; int mga_max_ioctl = DRM_ARRAY_SIZE(mga_ioctls); diff --git a/drivers/char/drm/mga_warp.c b/drivers/char/drm/mga_warp.c index 0a3a0cc700d..55ccc8a0ac2 100644 --- a/drivers/char/drm/mga_warp.c +++ b/drivers/char/drm/mga_warp.c @@ -48,65 +48,52 @@ do { \ vcbase += WARP_UCODE_SIZE( which ); \ } while (0) - -static unsigned int mga_warp_g400_microcode_size( drm_mga_private_t *dev_priv ) -{ - unsigned int size; - - size = ( WARP_UCODE_SIZE( warp_g400_tgz ) + - WARP_UCODE_SIZE( warp_g400_tgza ) + - WARP_UCODE_SIZE( warp_g400_tgzaf ) + - WARP_UCODE_SIZE( warp_g400_tgzf ) + - WARP_UCODE_SIZE( warp_g400_tgzs ) + - WARP_UCODE_SIZE( warp_g400_tgzsa ) + - WARP_UCODE_SIZE( warp_g400_tgzsaf ) + - WARP_UCODE_SIZE( warp_g400_tgzsf ) + - WARP_UCODE_SIZE( warp_g400_t2gz ) + - WARP_UCODE_SIZE( warp_g400_t2gza ) + - WARP_UCODE_SIZE( warp_g400_t2gzaf ) + - WARP_UCODE_SIZE( warp_g400_t2gzf ) + - WARP_UCODE_SIZE( warp_g400_t2gzs ) + - WARP_UCODE_SIZE( warp_g400_t2gzsa ) + - WARP_UCODE_SIZE( warp_g400_t2gzsaf ) + - WARP_UCODE_SIZE( warp_g400_t2gzsf ) ); - - size = PAGE_ALIGN( size ); - - DRM_DEBUG( "G400 ucode size = %d bytes\n", size ); - return size; -} - -static unsigned int mga_warp_g200_microcode_size( drm_mga_private_t *dev_priv ) +static const unsigned int mga_warp_g400_microcode_size = + (WARP_UCODE_SIZE(warp_g400_tgz) + + WARP_UCODE_SIZE(warp_g400_tgza) + + WARP_UCODE_SIZE(warp_g400_tgzaf) + + WARP_UCODE_SIZE(warp_g400_tgzf) + + WARP_UCODE_SIZE(warp_g400_tgzs) + + WARP_UCODE_SIZE(warp_g400_tgzsa) + + WARP_UCODE_SIZE(warp_g400_tgzsaf) + + WARP_UCODE_SIZE(warp_g400_tgzsf) + + WARP_UCODE_SIZE(warp_g400_t2gz) + + WARP_UCODE_SIZE(warp_g400_t2gza) + + WARP_UCODE_SIZE(warp_g400_t2gzaf) + + WARP_UCODE_SIZE(warp_g400_t2gzf) + + WARP_UCODE_SIZE(warp_g400_t2gzs) + + WARP_UCODE_SIZE(warp_g400_t2gzsa) + + WARP_UCODE_SIZE(warp_g400_t2gzsaf) + + WARP_UCODE_SIZE(warp_g400_t2gzsf)); + +static const unsigned int mga_warp_g200_microcode_size = + (WARP_UCODE_SIZE(warp_g200_tgz) + + WARP_UCODE_SIZE(warp_g200_tgza) + + WARP_UCODE_SIZE(warp_g200_tgzaf) + + WARP_UCODE_SIZE(warp_g200_tgzf) + + WARP_UCODE_SIZE(warp_g200_tgzs) + + WARP_UCODE_SIZE(warp_g200_tgzsa) + + WARP_UCODE_SIZE(warp_g200_tgzsaf) + + WARP_UCODE_SIZE(warp_g200_tgzsf)); + + +unsigned int mga_warp_microcode_size(const drm_mga_private_t * dev_priv) { - unsigned int size; - - size = ( WARP_UCODE_SIZE( warp_g200_tgz ) + - WARP_UCODE_SIZE( warp_g200_tgza ) + - WARP_UCODE_SIZE( warp_g200_tgzaf ) + - WARP_UCODE_SIZE( warp_g200_tgzf ) + - WARP_UCODE_SIZE( warp_g200_tgzs ) + - WARP_UCODE_SIZE( warp_g200_tgzsa ) + - WARP_UCODE_SIZE( warp_g200_tgzsaf ) + - WARP_UCODE_SIZE( warp_g200_tgzsf ) ); - - size = PAGE_ALIGN( size ); - - DRM_DEBUG( "G200 ucode size = %d bytes\n", size ); - return size; + switch (dev_priv->chipset) { + case MGA_CARD_TYPE_G400: + case MGA_CARD_TYPE_G550: + return PAGE_ALIGN(mga_warp_g400_microcode_size); + case MGA_CARD_TYPE_G200: + return PAGE_ALIGN(mga_warp_g200_microcode_size); + default: + return 0; + } } static int mga_warp_install_g400_microcode( drm_mga_private_t *dev_priv ) { unsigned char *vcbase = dev_priv->warp->handle; unsigned long pcbase = dev_priv->warp->offset; - unsigned int size; - - size = mga_warp_g400_microcode_size( dev_priv ); - if ( size > dev_priv->warp->size ) { - DRM_ERROR( "microcode too large! (%u > %lu)\n", - size, dev_priv->warp->size ); - return DRM_ERR(ENOMEM); - } memset( dev_priv->warp_pipe_phys, 0, sizeof(dev_priv->warp_pipe_phys) ); @@ -136,35 +123,36 @@ static int mga_warp_install_g200_microcode( drm_mga_private_t *dev_priv ) { unsigned char *vcbase = dev_priv->warp->handle; unsigned long pcbase = dev_priv->warp->offset; - unsigned int size; - - size = mga_warp_g200_microcode_size( dev_priv ); - if ( size > dev_priv->warp->size ) { - DRM_ERROR( "microcode too large! (%u > %lu)\n", - size, dev_priv->warp->size ); - return DRM_ERR(ENOMEM); - } - memset( dev_priv->warp_pipe_phys, 0, - sizeof(dev_priv->warp_pipe_phys) ); + memset(dev_priv->warp_pipe_phys, 0, sizeof(dev_priv->warp_pipe_phys)); - WARP_UCODE_INSTALL( warp_g200_tgz, MGA_WARP_TGZ ); - WARP_UCODE_INSTALL( warp_g200_tgzf, MGA_WARP_TGZF ); - WARP_UCODE_INSTALL( warp_g200_tgza, MGA_WARP_TGZA ); - WARP_UCODE_INSTALL( warp_g200_tgzaf, MGA_WARP_TGZAF ); - WARP_UCODE_INSTALL( warp_g200_tgzs, MGA_WARP_TGZS ); - WARP_UCODE_INSTALL( warp_g200_tgzsf, MGA_WARP_TGZSF ); - WARP_UCODE_INSTALL( warp_g200_tgzsa, MGA_WARP_TGZSA ); - WARP_UCODE_INSTALL( warp_g200_tgzsaf, MGA_WARP_TGZSAF ); + WARP_UCODE_INSTALL(warp_g200_tgz, MGA_WARP_TGZ); + WARP_UCODE_INSTALL(warp_g200_tgzf, MGA_WARP_TGZF); + WARP_UCODE_INSTALL(warp_g200_tgza, MGA_WARP_TGZA); + WARP_UCODE_INSTALL(warp_g200_tgzaf, MGA_WARP_TGZAF); + WARP_UCODE_INSTALL(warp_g200_tgzs, MGA_WARP_TGZS); + WARP_UCODE_INSTALL(warp_g200_tgzsf, MGA_WARP_TGZSF); + WARP_UCODE_INSTALL(warp_g200_tgzsa, MGA_WARP_TGZSA); + WARP_UCODE_INSTALL(warp_g200_tgzsaf, MGA_WARP_TGZSAF); return 0; } int mga_warp_install_microcode( drm_mga_private_t *dev_priv ) { - switch ( dev_priv->chipset ) { + const unsigned int size = mga_warp_microcode_size(dev_priv); + + DRM_DEBUG("MGA ucode size = %d bytes\n", size); + if (size > dev_priv->warp->size) { + DRM_ERROR("microcode too large! (%u > %lu)\n", + size, dev_priv->warp->size); + return DRM_ERR(ENOMEM); + } + + switch (dev_priv->chipset) { case MGA_CARD_TYPE_G400: - return mga_warp_install_g400_microcode( dev_priv ); + case MGA_CARD_TYPE_G550: + return mga_warp_install_g400_microcode(dev_priv); case MGA_CARD_TYPE_G200: return mga_warp_install_g200_microcode( dev_priv ); default: @@ -182,10 +170,11 @@ int mga_warp_init( drm_mga_private_t *dev_priv ) */ switch ( dev_priv->chipset ) { case MGA_CARD_TYPE_G400: - MGA_WRITE( MGA_WIADDR2, MGA_WMODE_SUSPEND ); - MGA_WRITE( MGA_WGETMSB, 0x00000E00 ); - MGA_WRITE( MGA_WVRTXSZ, 0x00001807 ); - MGA_WRITE( MGA_WACCEPTSEQ, 0x18000000 ); + case MGA_CARD_TYPE_G550: + MGA_WRITE(MGA_WIADDR2, MGA_WMODE_SUSPEND); + MGA_WRITE(MGA_WGETMSB, 0x00000E00); + MGA_WRITE(MGA_WVRTXSZ, 0x00001807); + MGA_WRITE(MGA_WACCEPTSEQ, 0x18000000); break; case MGA_CARD_TYPE_G200: MGA_WRITE( MGA_WIADDR, MGA_WMODE_SUSPEND ); -- cgit v1.2.3 From d01cff408057fa925b2f766fa1fd5a305fd1acbf Mon Sep 17 00:00:00 2001 From: Dave Airlie Date: Sun, 10 Jul 2005 19:24:35 +1000 Subject: drm: add mga driver callbacks Add some missing driver callback for the PCI support Signed-off-by: Dave Airlie --- drivers/char/drm/mga_drv.c | 8 ++++++++ 1 file changed, 8 insertions(+) diff --git a/drivers/char/drm/mga_drv.c b/drivers/char/drm/mga_drv.c index 94af13bc66a..daabbba3b29 100644 --- a/drivers/char/drm/mga_drv.c +++ b/drivers/char/drm/mga_drv.c @@ -41,6 +41,12 @@ static int mga_driver_device_is_agp(drm_device_t * dev); static int postinit( struct drm_device *dev, unsigned long flags ) { + drm_mga_private_t * const dev_priv = + (drm_mga_private_t *) dev->dev_private; + + dev_priv->mmio_base = pci_resource_start(dev->pdev, 1); + dev_priv->mmio_size = pci_resource_len(dev->pdev, 1); + dev->counters += 3; dev->types[6] = _DRM_STAT_IRQ; dev->types[7] = _DRM_STAT_PRIMARY; @@ -80,6 +86,8 @@ extern int mga_max_ioctl; static struct drm_driver driver = { .driver_features = DRIVER_USE_AGP | DRIVER_REQUIRE_AGP | DRIVER_USE_MTRR | DRIVER_HAVE_DMA | DRIVER_HAVE_IRQ | DRIVER_IRQ_SHARED | DRIVER_IRQ_VBL, + .preinit = mga_driver_preinit, + .postcleanup = mga_driver_postcleanup, .pretakedown = mga_driver_pretakedown, .dma_quiescent = mga_driver_dma_quiescent, .device_is_agp = mga_driver_device_is_agp, -- cgit v1.2.3 From 836cf0465c422ee6d654060edd7c620d9cf0c09c Mon Sep 17 00:00:00 2001 From: Dave Airlie Date: Sun, 10 Jul 2005 19:27:04 +1000 Subject: drm: cleanup buffer/map code This is a patch from DRM CVS that cleans up some code that was in CVS that I never moved to the kernel, this patch produces the result of the cleanups and puts it into the kernel drm. From: Eric Anholt , Jon Smirl, Dave Airlie Signed-off-by: Dave Airlie --- drivers/char/drm/drmP.h | 9 +- drivers/char/drm/drm_bufs.c | 229 +++++++++++++++++++++++++++++------------- drivers/char/drm/drm_drv.c | 68 +++---------- drivers/char/drm/drm_fops.c | 6 -- drivers/char/drm/drm_stub.c | 5 + drivers/char/drm/radeon_cp.c | 21 ++++ drivers/char/drm/radeon_drv.c | 1 + drivers/char/drm/radeon_drv.h | 1 + 8 files changed, 210 insertions(+), 130 deletions(-) diff --git a/drivers/char/drm/drmP.h b/drivers/char/drm/drmP.h index a7fdcece612..fb2af927914 100644 --- a/drivers/char/drm/drmP.h +++ b/drivers/char/drm/drmP.h @@ -908,10 +908,11 @@ extern int drm_addbufs_agp(drm_device_t *dev, drm_buf_desc_t *request); extern int drm_addbufs_pci(drm_device_t *dev, drm_buf_desc_t *request); extern int drm_addmap(drm_device_t *dev, unsigned int offset, unsigned int size, drm_map_type_t type, - drm_map_flags_t flags, drm_map_t **map_ptr); + drm_map_flags_t flags, drm_local_map_t **map_ptr); extern int drm_addmap_ioctl(struct inode *inode, struct file *filp, unsigned int cmd, unsigned long arg); -extern int drm_rmmap(drm_device_t *dev, void *handle); +extern int drm_rmmap(drm_device_t *dev, drm_local_map_t *map); +extern int drm_rmmap_locked(drm_device_t *dev, drm_local_map_t *map); extern int drm_rmmap_ioctl(struct inode *inode, struct file *filp, unsigned int cmd, unsigned long arg); @@ -926,6 +927,10 @@ extern int drm_freebufs( struct inode *inode, struct file *filp, unsigned int cmd, unsigned long arg ); extern int drm_mapbufs( struct inode *inode, struct file *filp, unsigned int cmd, unsigned long arg ); +extern unsigned long drm_get_resource_start(drm_device_t *dev, + unsigned int resource); +extern unsigned long drm_get_resource_len(drm_device_t *dev, + unsigned int resource); /* DMA support (drm_dma.h) */ extern int drm_dma_setup(drm_device_t *dev); diff --git a/drivers/char/drm/drm_bufs.c b/drivers/char/drm/drm_bufs.c index 06b01215fdf..fcc8d244f46 100644 --- a/drivers/char/drm/drm_bufs.c +++ b/drivers/char/drm/drm_bufs.c @@ -36,29 +36,33 @@ #include #include "drmP.h" -/** - * Compute size order. Returns the exponent of the smaller power of two which - * is greater or equal to given number. - * - * \param size size. - * \return order. - * - * \todo Can be made faster. - */ -int drm_order( unsigned long size ) +unsigned long drm_get_resource_start(drm_device_t *dev, unsigned int resource) { - int order; - unsigned long tmp; + return pci_resource_start(dev->pdev, resource); +} +EXPORT_SYMBOL(drm_get_resource_start); - for (order = 0, tmp = size >> 1; tmp; tmp >>= 1, order++) - ; +unsigned long drm_get_resource_len(drm_device_t *dev, unsigned int resource) +{ + return pci_resource_len(dev->pdev, resource); +} +EXPORT_SYMBOL(drm_get_resource_len); - if (size & (size - 1)) - ++order; +static drm_local_map_t *drm_find_matching_map(drm_device_t *dev, + drm_local_map_t *map) +{ + struct list_head *list; - return order; + list_for_each(list, &dev->maplist->head) { + drm_map_list_t *entry = list_entry(list, drm_map_list_t, head); + if (entry->map && map->type == entry->map->type && + entry->map->offset == map->offset) { + return entry->map; + } + } + + return NULL; } -EXPORT_SYMBOL(drm_order); #ifdef CONFIG_COMPAT /* @@ -89,6 +93,7 @@ int drm_addmap(drm_device_t * dev, unsigned int offset, drm_map_t *map; drm_map_list_t *list; drm_dma_handle_t *dmah; + drm_local_map_t *found_map; map = drm_alloc( sizeof(*map), DRM_MEM_MAPS ); if ( !map ) @@ -129,6 +134,24 @@ int drm_addmap(drm_device_t * dev, unsigned int offset, #ifdef __alpha__ map->offset += dev->hose->mem_space->start; #endif + /* Some drivers preinitialize some maps, without the X Server + * needing to be aware of it. Therefore, we just return success + * when the server tries to create a duplicate map. + */ + found_map = drm_find_matching_map(dev, map); + if (found_map != NULL) { + if (found_map->size != map->size) { + DRM_DEBUG("Matching maps of type %d with " + "mismatched sizes, (%ld vs %ld)\n", + map->type, map->size, found_map->size); + found_map->size = map->size; + } + + drm_free(map, sizeof(*map), DRM_MEM_MAPS); + *map_ptr = found_map; + return 0; + } + if (drm_core_has_MTRR(dev)) { if ( map->type == _DRM_FRAME_BUFFER || (map->flags & _DRM_WRITE_COMBINING) ) { @@ -270,93 +293,136 @@ int drm_addmap_ioctl(struct inode *inode, struct file *filp, * * \sa drm_addmap */ -int drm_rmmap(drm_device_t *dev, void *handle) +int drm_rmmap_locked(drm_device_t *dev, drm_local_map_t *map) { struct list_head *list; drm_map_list_t *r_list = NULL; - drm_vma_entry_t *pt, *prev; - drm_map_t *map; - int found_maps = 0; + drm_dma_handle_t dmah; - down(&dev->struct_sem); - list = &dev->maplist->head; + /* Find the list entry for the map and remove it */ list_for_each(list, &dev->maplist->head) { r_list = list_entry(list, drm_map_list_t, head); - if(r_list->map && - r_list->map->handle == handle && - r_list->map->flags & _DRM_REMOVABLE) break; + if (r_list->map == map) { + list_del(list); + drm_free(list, sizeof(*list), DRM_MEM_MAPS); + break; + } } - /* List has wrapped around to the head pointer, or its empty we didn't - * find anything. + /* List has wrapped around to the head pointer, or it's empty and we + * didn't find anything. */ - if(list == (&dev->maplist->head)) { - up(&dev->struct_sem); + if (list == (&dev->maplist->head)) { return -EINVAL; } - map = r_list->map; - list_del(list); - drm_free(list, sizeof(*list), DRM_MEM_MAPS); - - for (pt = dev->vmalist, prev = NULL; pt; prev = pt, pt = pt->next) { - if (pt->vma->vm_private_data == map) found_maps++; - } - if(!found_maps) { - drm_dma_handle_t dmah; - - switch (map->type) { - case _DRM_REGISTERS: - case _DRM_FRAME_BUFFER: - if (drm_core_has_MTRR(dev)) { - if (map->mtrr >= 0) { - int retcode; - retcode = mtrr_del(map->mtrr, - map->offset, - map->size); - DRM_DEBUG("mtrr_del = %d\n", retcode); - } - } - drm_ioremapfree(map->handle, map->size, dev); - break; - case _DRM_SHM: - vfree(map->handle); - break; - case _DRM_AGP: - case _DRM_SCATTER_GATHER: - break; - case _DRM_CONSISTENT: - dmah.vaddr = map->handle; - dmah.busaddr = map->offset; - dmah.size = map->size; - __drm_pci_free(dev, &dmah); - break; + switch (map->type) { + case _DRM_REGISTERS: + drm_ioremapfree(map->handle, map->size, dev); + /* FALLTHROUGH */ + case _DRM_FRAME_BUFFER: + if (drm_core_has_MTRR(dev) && map->mtrr >= 0) { + int retcode; + retcode = mtrr_del(map->mtrr, map->offset, + map->size); + DRM_DEBUG ("mtrr_del=%d\n", retcode); } - drm_free(map, sizeof(*map), DRM_MEM_MAPS); + break; + case _DRM_SHM: + vfree(map->handle); + break; + case _DRM_AGP: + case _DRM_SCATTER_GATHER: + break; + case _DRM_CONSISTENT: + dmah.vaddr = map->handle; + dmah.busaddr = map->offset; + dmah.size = map->size; + __drm_pci_free(dev, &dmah); + break; } - up(&dev->struct_sem); + drm_free(map, sizeof(*map), DRM_MEM_MAPS); + return 0; } +EXPORT_SYMBOL(drm_rmmap_locked); + +int drm_rmmap(drm_device_t *dev, drm_local_map_t *map) +{ + int ret; + + down(&dev->struct_sem); + ret = drm_rmmap_locked(dev, map); + up(&dev->struct_sem); + + return ret; +} EXPORT_SYMBOL(drm_rmmap); +/* The rmmap ioctl appears to be unnecessary. All mappings are torn down on + * the last close of the device, and this is necessary for cleanup when things + * exit uncleanly. Therefore, having userland manually remove mappings seems + * like a pointless exercise since they're going away anyway. + * + * One use case might be after addmap is allowed for normal users for SHM and + * gets used by drivers that the server doesn't need to care about. This seems + * unlikely. + */ int drm_rmmap_ioctl(struct inode *inode, struct file *filp, unsigned int cmd, unsigned long arg) { drm_file_t *priv = filp->private_data; drm_device_t *dev = priv->head->dev; drm_map_t request; + drm_local_map_t *map = NULL; + struct list_head *list; + int ret; if (copy_from_user(&request, (drm_map_t __user *)arg, sizeof(request))) { return -EFAULT; } - return drm_rmmap(dev, request.handle); + down(&dev->struct_sem); + list_for_each(list, &dev->maplist->head) { + drm_map_list_t *r_list = list_entry(list, drm_map_list_t, head); + + if (r_list->map && + r_list->map->handle == request.handle && + r_list->map->flags & _DRM_REMOVABLE) { + map = r_list->map; + break; + } + } + + /* List has wrapped around to the head pointer, or its empty we didn't + * find anything. + */ + if (list == (&dev->maplist->head)) { + up(&dev->struct_sem); + return -EINVAL; + } + + if (!map) + return -EINVAL; + + /* Register and framebuffer maps are permanent */ + if ((map->type == _DRM_REGISTERS) || (map->type == _DRM_FRAME_BUFFER)) { + up(&dev->struct_sem); + return 0; + } + + ret = drm_rmmap_locked(dev, map); + + up(&dev->struct_sem); + + return ret; } /** * Cleanup after an error on one of the addbufs() functions. * + * \param dev DRM device. * \param entry buffer entry where the error occurred. * * Frees any pages and buffers associated with the given entry. @@ -1470,3 +1536,26 @@ int drm_mapbufs( struct inode *inode, struct file *filp, return retcode; } +/** + * Compute size order. Returns the exponent of the smaller power of two which + * is greater or equal to given number. + * + * \param size size. + * \return order. + * + * \todo Can be made faster. + */ +int drm_order( unsigned long size ) +{ + int order; + unsigned long tmp; + + for (order = 0, tmp = size >> 1; tmp; tmp >>= 1, order++) + ; + + if (size & (size - 1)) + ++order; + + return order; +} +EXPORT_SYMBOL(drm_order); diff --git a/drivers/char/drm/drm_drv.c b/drivers/char/drm/drm_drv.c index 733af58fb3a..6ba48f346fc 100644 --- a/drivers/char/drm/drm_drv.c +++ b/drivers/char/drm/drm_drv.c @@ -132,9 +132,7 @@ static drm_ioctl_desc_t drm_ioctls[] = { int drm_takedown( drm_device_t *dev ) { drm_magic_entry_t *pt, *next; - drm_map_t *map; drm_map_list_t *r_list; - struct list_head *list, *list_next; drm_vma_entry_t *vma, *vma_next; int i; @@ -142,6 +140,7 @@ int drm_takedown( drm_device_t *dev ) if (dev->driver->pretakedown) dev->driver->pretakedown(dev); + DRM_DEBUG("driver pretakedown completed\n"); if (dev->unique) { drm_free(dev->unique, strlen(dev->unique) + 1, DRM_MEM_DRIVER); @@ -184,6 +183,10 @@ int drm_takedown( drm_device_t *dev ) dev->agp->acquired = 0; dev->agp->enabled = 0; } + if (drm_core_check_feature(dev, DRIVER_SG) && dev->sg) { + drm_sg_cleanup(dev->sg); + dev->sg = NULL; + } /* Clear vma list (only built for debugging) */ if ( dev->vmalist ) { @@ -195,56 +198,11 @@ int drm_takedown( drm_device_t *dev ) } if( dev->maplist ) { - list_for_each_safe( list, list_next, &dev->maplist->head ) { - r_list = (drm_map_list_t *)list; - - if ( ( map = r_list->map ) ) { - drm_dma_handle_t dmah; - - switch ( map->type ) { - case _DRM_REGISTERS: - case _DRM_FRAME_BUFFER: - if (drm_core_has_MTRR(dev)) { - if ( map->mtrr >= 0 ) { - int retcode; - retcode = mtrr_del( map->mtrr, - map->offset, - map->size ); - DRM_DEBUG( "mtrr_del=%d\n", retcode ); - } - } - drm_ioremapfree( map->handle, map->size, dev ); - break; - case _DRM_SHM: - vfree(map->handle); - break; - - case _DRM_AGP: - /* Do nothing here, because this is all - * handled in the AGP/GART driver. - */ - break; - case _DRM_SCATTER_GATHER: - /* Handle it */ - if (drm_core_check_feature(dev, DRIVER_SG) && dev->sg) { - drm_sg_cleanup(dev->sg); - dev->sg = NULL; - } - break; - case _DRM_CONSISTENT: - dmah.vaddr = map->handle; - dmah.busaddr = map->offset; - dmah.size = map->size; - __drm_pci_free(dev, &dmah); - break; - } - drm_free(map, sizeof(*map), DRM_MEM_MAPS); - } - list_del( list ); - drm_free(r_list, sizeof(*r_list), DRM_MEM_MAPS); - } - drm_free(dev->maplist, sizeof(*dev->maplist), DRM_MEM_MAPS); - dev->maplist = NULL; + while (!list_empty(&dev->maplist->head)) { + struct list_head *list = dev->maplist->head.next; + r_list = list_entry(list, drm_map_list_t, head); + drm_rmmap_locked(dev, r_list->map); + } } if (drm_core_check_feature(dev, DRIVER_DMA_QUEUE) && dev->queuelist ) { @@ -273,6 +231,7 @@ int drm_takedown( drm_device_t *dev ) } up( &dev->struct_sem ); + DRM_DEBUG("takedown completed\n"); return 0; } @@ -334,6 +293,11 @@ static void drm_cleanup( drm_device_t *dev ) drm_takedown( dev ); + if (dev->maplist) { + drm_free(dev->maplist, sizeof(*dev->maplist), DRM_MEM_MAPS); + dev->maplist = NULL; + } + drm_ctxbitmap_cleanup( dev ); if (drm_core_has_MTRR(dev) && drm_core_has_AGP(dev) && diff --git a/drivers/char/drm/drm_fops.c b/drivers/char/drm/drm_fops.c index 10e64fde8d7..a1f4e9cd64e 100644 --- a/drivers/char/drm/drm_fops.c +++ b/drivers/char/drm/drm_fops.c @@ -71,12 +71,6 @@ static int drm_setup( drm_device_t *dev ) dev->magiclist[i].tail = NULL; } - dev->maplist = drm_alloc(sizeof(*dev->maplist), - DRM_MEM_MAPS); - if(dev->maplist == NULL) return -ENOMEM; - memset(dev->maplist, 0, sizeof(*dev->maplist)); - INIT_LIST_HEAD(&dev->maplist->head); - dev->ctxlist = drm_alloc(sizeof(*dev->ctxlist), DRM_MEM_CTXLIST); if(dev->ctxlist == NULL) return -ENOMEM; diff --git a/drivers/char/drm/drm_stub.c b/drivers/char/drm/drm_stub.c index 068ca9a8b0b..95a976c96eb 100644 --- a/drivers/char/drm/drm_stub.c +++ b/drivers/char/drm/drm_stub.c @@ -75,6 +75,11 @@ static int drm_fill_in_dev(drm_device_t *dev, struct pci_dev *pdev, const struct dev->pci_func = PCI_FUNC(pdev->devfn); dev->irq = pdev->irq; + dev->maplist = drm_calloc(1, sizeof(*dev->maplist), DRM_MEM_MAPS); + if (dev->maplist == NULL) + return -ENOMEM; + INIT_LIST_HEAD(&dev->maplist->head); + /* the DRM has 6 basic counters */ dev->counters = 6; dev->types[0] = _DRM_STAT_LOCK; diff --git a/drivers/char/drm/radeon_cp.c b/drivers/char/drm/radeon_cp.c index 20bcf872b34..8255cc6fdc2 100644 --- a/drivers/char/drm/radeon_cp.c +++ b/drivers/char/drm/radeon_cp.c @@ -2048,6 +2048,27 @@ int radeon_driver_preinit(struct drm_device *dev, unsigned long flags) return ret; } +int radeon_presetup(struct drm_device *dev) +{ + int ret; + drm_local_map_t *map; + drm_radeon_private_t *dev_priv = dev->dev_private; + + ret = drm_addmap(dev, drm_get_resource_start(dev, 2), + drm_get_resource_len(dev, 2), _DRM_REGISTERS, + _DRM_READ_ONLY, &dev_priv->mmio); + if (ret != 0) + return ret; + + ret = drm_addmap(dev, drm_get_resource_start(dev, 0), + drm_get_resource_len(dev, 0), _DRM_FRAME_BUFFER, + _DRM_WRITE_COMBINING, &map); + if (ret != 0) + return ret; + + return 0; +} + int radeon_driver_postcleanup(struct drm_device *dev) { drm_radeon_private_t *dev_priv = dev->dev_private; diff --git a/drivers/char/drm/radeon_drv.c b/drivers/char/drm/radeon_drv.c index 18e4e5b0952..e0682f64b40 100644 --- a/drivers/char/drm/radeon_drv.c +++ b/drivers/char/drm/radeon_drv.c @@ -76,6 +76,7 @@ static struct drm_driver driver = { .driver_features = DRIVER_USE_AGP | DRIVER_USE_MTRR | DRIVER_PCI_DMA | DRIVER_SG | DRIVER_HAVE_IRQ | DRIVER_HAVE_DMA | DRIVER_IRQ_SHARED | DRIVER_IRQ_VBL, .dev_priv_size = sizeof(drm_radeon_buf_priv_t), .preinit = radeon_driver_preinit, + .presetup = radeon_presetup, .postcleanup = radeon_driver_postcleanup, .prerelease = radeon_driver_prerelease, .pretakedown = radeon_driver_pretakedown, diff --git a/drivers/char/drm/radeon_drv.h b/drivers/char/drm/radeon_drv.h index 771aa80a5e8..e701dffe978 100644 --- a/drivers/char/drm/radeon_drv.h +++ b/drivers/char/drm/radeon_drv.h @@ -290,6 +290,7 @@ extern int radeon_wait_ring( drm_radeon_private_t *dev_priv, int n ); extern int radeon_do_cp_idle( drm_radeon_private_t *dev_priv ); extern int radeon_driver_preinit(struct drm_device *dev, unsigned long flags); +extern int radeon_presetup(struct drm_device *dev); extern int radeon_driver_postcleanup(struct drm_device *dev); extern int radeon_mem_alloc( DRM_IOCTL_ARGS ); -- cgit v1.2.3 From 4689ced99b18937e28c0f6c190394ccc3c61d651 Mon Sep 17 00:00:00 2001 From: Peer Chen Date: Fri, 29 Jul 2005 15:33:58 -0400 Subject: [netdrvr] add 'uli526x' driver (a tulip clone) We want to extract our LAN card driver from tulip core driver and make a new file uli526x.c at tulip folder, because we have added some ethtool interface support and non-eprom support in our driver and may be other change in the futher. If our controllers support are still contained in the tulip core driver, I think it'll increase the complexity of maintenance, you know, tulip core driver include several files and support so many other controllers. Furthermore, I tested the newest kernel 2.6.12 and I found the tulip driver can not work on our lan controller, and I no time to debug it, so I aspired want to make a single uli526x.c file just for our controllers. Could you help us remove the ULi m5261/m5263 lan controller support from tulip core driver and add the new single uli526x.c file for us? Signed-off-by: Peer Chen Signed-off-by: Jeff Garzik --- drivers/net/tulip/Kconfig | 12 + drivers/net/tulip/Makefile | 1 + drivers/net/tulip/uli526x.c | 1770 +++++++++++++++++++++++++++++++++++++++++++ 3 files changed, 1783 insertions(+) create mode 100644 drivers/net/tulip/uli526x.c diff --git a/drivers/net/tulip/Kconfig b/drivers/net/tulip/Kconfig index e2cdaf87620..8c9634a98c1 100644 --- a/drivers/net/tulip/Kconfig +++ b/drivers/net/tulip/Kconfig @@ -135,6 +135,18 @@ config DM9102 . The module will be called dmfe. +config ULI526X + tristate "ULi M526x controller support" + depends on NET_TULIP && PCI + select CRC32 + ---help--- + This driver is for ULi M5261/M5263 10/100M Ethernet Controller + (). + + To compile this driver as a module, choose M here and read + . The module will + be called uli526x. + config PCMCIA_XIRCOM tristate "Xircom CardBus support (new driver)" depends on NET_TULIP && CARDBUS diff --git a/drivers/net/tulip/Makefile b/drivers/net/tulip/Makefile index 8bb9b468397..451090d6fcc 100644 --- a/drivers/net/tulip/Makefile +++ b/drivers/net/tulip/Makefile @@ -9,6 +9,7 @@ obj-$(CONFIG_WINBOND_840) += winbond-840.o obj-$(CONFIG_DE2104X) += de2104x.o obj-$(CONFIG_TULIP) += tulip.o obj-$(CONFIG_DE4X5) += de4x5.o +obj-$(CONFIG_ULI526X) += uli526x.o # Declare multi-part drivers. diff --git a/drivers/net/tulip/uli526x.c b/drivers/net/tulip/uli526x.c new file mode 100644 index 00000000000..27f99e087f7 --- /dev/null +++ b/drivers/net/tulip/uli526x.c @@ -0,0 +1,1770 @@ +/* + This program is free software; you can redistribute it and/or + modify it under the terms of the GNU General Public License + as published by the Free Software Foundation; either version 2 + of the License, or (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + +*/ + +#define DRV_NAME "uli526x" +#define DRV_VERSION "0.9.3" +#define DRV_RELDATE "2005-7-29" + +#include + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include +#include +#include + + +/* Board/System/Debug information/definition ---------------- */ +#define PCI_ULI5261_ID 0x526110B9 /* ULi M5261 ID*/ +#define PCI_ULI5263_ID 0x526310B9 /* ULi M5263 ID*/ + +#define ULI526X_IO_SIZE 0x100 +#define TX_DESC_CNT 0x20 /* Allocated Tx descriptors */ +#define RX_DESC_CNT 0x30 /* Allocated Rx descriptors */ +#define TX_FREE_DESC_CNT (TX_DESC_CNT - 2) /* Max TX packet count */ +#define TX_WAKE_DESC_CNT (TX_DESC_CNT - 3) /* TX wakeup count */ +#define DESC_ALL_CNT (TX_DESC_CNT + RX_DESC_CNT) +#define TX_BUF_ALLOC 0x600 +#define RX_ALLOC_SIZE 0x620 +#define ULI526X_RESET 1 +#define CR0_DEFAULT 0 +#define CR6_DEFAULT 0x00080000 /* HD */ +#define CR6_DEFAULT_A 0x22240000 +#define CR7_DEFAULT 0x180c1 +#define CR15_DEFAULT 0x06 /* TxJabber RxWatchdog */ +#define TDES0_ERR_MASK 0x4302 /* TXJT, LC, EC, FUE */ +#define MAX_PACKET_SIZE 1514 +#define ULI5261_MAX_MULTICAST 14 +#define RX_COPY_SIZE 100 +#define MAX_CHECK_PACKET 0x8000 + +#define ULI526X_10MHF 0 +#define ULI526X_100MHF 1 +#define ULI526X_10MFD 4 +#define ULI526X_100MFD 5 +#define ULI526X_AUTO 8 + +#define ULI526X_TXTH_72 0x400000 /* TX TH 72 byte */ +#define ULI526X_TXTH_96 0x404000 /* TX TH 96 byte */ +#define ULI526X_TXTH_128 0x0000 /* TX TH 128 byte */ +#define ULI526X_TXTH_256 0x4000 /* TX TH 256 byte */ +#define ULI526X_TXTH_512 0x8000 /* TX TH 512 byte */ +#define ULI526X_TXTH_1K 0xC000 /* TX TH 1K byte */ + +#define ULI526X_TIMER_WUT (jiffies + HZ * 1)/* timer wakeup time : 1 second */ +#define ULI526X_TX_TIMEOUT ((16*HZ)/2) /* tx packet time-out time 8 s" */ +#define ULI526X_TX_KICK (4*HZ/2) /* tx packet Kick-out time 2 s" */ + +#define ULI526X_DBUG(dbug_now, msg, value) if (uli526x_debug || (dbug_now)) printk(KERN_ERR DRV_NAME ": %s %lx\n", (msg), (long) (value)) + +#define SHOW_MEDIA_TYPE(mode) printk(KERN_ERR DRV_NAME ": Change Speed to %sMhz %s duplex\n",mode & 1 ?"100":"10", mode & 4 ? "full":"half"); + + +/* CR9 definition: SROM/MII */ +#define CR9_SROM_READ 0x4800 +#define CR9_SRCS 0x1 +#define CR9_SRCLK 0x2 +#define CR9_CRDOUT 0x8 +#define SROM_DATA_0 0x0 +#define SROM_DATA_1 0x4 +#define PHY_DATA_1 0x20000 +#define PHY_DATA_0 0x00000 +#define MDCLKH 0x10000 + +#define PHY_POWER_DOWN 0x800 + +#define SROM_V41_CODE 0x14 + +#define SROM_CLK_WRITE(data, ioaddr) outl(data|CR9_SROM_READ|CR9_SRCS,ioaddr);udelay(5);outl(data|CR9_SROM_READ|CR9_SRCS|CR9_SRCLK,ioaddr);udelay(5);outl(data|CR9_SROM_READ|CR9_SRCS,ioaddr);udelay(5); + +/* Sten Check */ +#define DEVICE net_device + +/* Structure/enum declaration ------------------------------- */ +struct tx_desc { + u32 tdes0, tdes1, tdes2, tdes3; /* Data for the card */ + char *tx_buf_ptr; /* Data for us */ + struct tx_desc *next_tx_desc; +} __attribute__(( aligned(32) )); + +struct rx_desc { + u32 rdes0, rdes1, rdes2, rdes3; /* Data for the card */ + struct sk_buff *rx_skb_ptr; /* Data for us */ + struct rx_desc *next_rx_desc; +} __attribute__(( aligned(32) )); + +struct uli526x_board_info { + u32 chip_id; /* Chip vendor/Device ID */ + struct DEVICE *next_dev; /* next device */ + struct pci_dev *pdev; /* PCI device */ + spinlock_t lock; + + long ioaddr; /* I/O base address */ + u32 cr0_data; + u32 cr5_data; + u32 cr6_data; + u32 cr7_data; + u32 cr15_data; + + /* pointer for memory physical address */ + dma_addr_t buf_pool_dma_ptr; /* Tx buffer pool memory */ + dma_addr_t buf_pool_dma_start; /* Tx buffer pool align dword */ + dma_addr_t desc_pool_dma_ptr; /* descriptor pool memory */ + dma_addr_t first_tx_desc_dma; + dma_addr_t first_rx_desc_dma; + + /* descriptor pointer */ + unsigned char *buf_pool_ptr; /* Tx buffer pool memory */ + unsigned char *buf_pool_start; /* Tx buffer pool align dword */ + unsigned char *desc_pool_ptr; /* descriptor pool memory */ + struct tx_desc *first_tx_desc; + struct tx_desc *tx_insert_ptr; + struct tx_desc *tx_remove_ptr; + struct rx_desc *first_rx_desc; + struct rx_desc *rx_insert_ptr; + struct rx_desc *rx_ready_ptr; /* packet come pointer */ + unsigned long tx_packet_cnt; /* transmitted packet count */ + unsigned long rx_avail_cnt; /* available rx descriptor count */ + unsigned long interval_rx_cnt; /* rx packet count a callback time */ + + u16 dbug_cnt; + u16 NIC_capability; /* NIC media capability */ + u16 PHY_reg4; /* Saved Phyxcer register 4 value */ + + u8 media_mode; /* user specify media mode */ + u8 op_mode; /* real work media mode */ + u8 phy_addr; + u8 link_failed; /* Ever link failed */ + u8 wait_reset; /* Hardware failed, need to reset */ + struct timer_list timer; + + /* System defined statistic counter */ + struct net_device_stats stats; + + /* Driver defined statistic counter */ + unsigned long tx_fifo_underrun; + unsigned long tx_loss_carrier; + unsigned long tx_no_carrier; + unsigned long tx_late_collision; + unsigned long tx_excessive_collision; + unsigned long tx_jabber_timeout; + unsigned long reset_count; + unsigned long reset_cr8; + unsigned long reset_fatal; + unsigned long reset_TXtimeout; + + /* NIC SROM data */ + unsigned char srom[128]; + u8 init; +}; + +enum uli526x_offsets { + DCR0 = 0x00, DCR1 = 0x08, DCR2 = 0x10, DCR3 = 0x18, DCR4 = 0x20, + DCR5 = 0x28, DCR6 = 0x30, DCR7 = 0x38, DCR8 = 0x40, DCR9 = 0x48, + DCR10 = 0x50, DCR11 = 0x58, DCR12 = 0x60, DCR13 = 0x68, DCR14 = 0x70, + DCR15 = 0x78 +}; + +enum uli526x_CR6_bits { + CR6_RXSC = 0x2, CR6_PBF = 0x8, CR6_PM = 0x40, CR6_PAM = 0x80, + CR6_FDM = 0x200, CR6_TXSC = 0x2000, CR6_STI = 0x100000, + CR6_SFT = 0x200000, CR6_RXA = 0x40000000, CR6_NO_PURGE = 0x20000000 +}; + +/* Global variable declaration ----------------------------- */ +static int __devinitdata printed_version; +static char version[] __devinitdata = + KERN_INFO DRV_NAME ": ULi M5261/M5263 net driver, version " + DRV_VERSION " (" DRV_RELDATE ")\n"; + +static int uli526x_debug; +static unsigned char uli526x_media_mode = ULI526X_AUTO; +static u32 uli526x_cr6_user_set; + +/* For module input parameter */ +static int debug; +static u32 cr6set; +static u32 m526x_id; +static unsigned char mode = 8; + +/* function declaration ------------------------------------- */ +static int uli526x_open(struct DEVICE *); +static int uli526x_start_xmit(struct sk_buff *, struct DEVICE *); +static int uli526x_stop(struct DEVICE *); +static struct net_device_stats * uli526x_get_stats(struct DEVICE *); +static void uli526x_set_filter_mode(struct DEVICE *); +static struct ethtool_ops netdev_ethtool_ops; +static u16 read_srom_word(long ,int); +static irqreturn_t uli526x_interrupt(int , void *, struct pt_regs *); +static void uli526x_descriptor_init(struct uli526x_board_info *, unsigned long); +static void allocate_rx_buffer(struct uli526x_board_info *); +static void update_cr6(u32, unsigned long); +static void send_filter_frame(struct DEVICE * ,int); +static u16 phy_read(unsigned long, u8, u8, u32); +static u16 phy_readby_cr10(unsigned long, u8, u8); +static void phy_write(unsigned long, u8, u8, u16, u32); +static void phy_writeby_cr10(unsigned long, u8, u8, u16); +static void phy_write_1bit(unsigned long, u32, u32); +static u16 phy_read_1bit(unsigned long, u32); +static u8 uli526x_sense_speed(struct uli526x_board_info *); +static void uli526x_process_mode(struct uli526x_board_info *); +static void uli526x_timer(unsigned long); +static void uli526x_rx_packet(struct DEVICE *, struct uli526x_board_info *); +static void uli526x_free_tx_pkt(struct DEVICE *, struct uli526x_board_info *); +static void uli526x_reuse_skb(struct uli526x_board_info *, struct sk_buff *); +static void uli526x_dynamic_reset(struct DEVICE *); +static void uli526x_free_rxbuffer(struct uli526x_board_info *); +static void uli526x_init(struct DEVICE *); +static void uli526x_set_phyxcer(struct uli526x_board_info *); + +/* ULI526X network baord routine ---------------------------- */ + +/* + * Search ULI526X board ,allocate space and register it + */ + +static int __devinit uli526x_init_one (struct pci_dev *pdev, + const struct pci_device_id *ent) +{ + struct uli526x_board_info *db; /* board information structure */ + struct net_device *dev; + int i, err; + u32 configval; + + ULI526X_DBUG(0, "uli526x_init_one()", 0); + + if (!printed_version++) + printk(version); + + /* Init network device */ + dev = alloc_etherdev(sizeof(*db)); + if (dev == NULL) + return -ENOMEM; + SET_MODULE_OWNER(dev); + SET_NETDEV_DEV(dev, &pdev->dev); + + if (pci_set_dma_mask(pdev, 0xffffffff)) { + printk(KERN_WARNING DRV_NAME ": 32-bit PCI DMA not available.\n"); + err = -ENODEV; + goto err_out_free; + } + + /* Enable Master/IO access, Disable memory access */ + err = pci_enable_device(pdev); + if (err) + goto err_out_free; + + if (!pci_resource_start(pdev, 0)) { + printk(KERN_ERR DRV_NAME ": I/O base is zero\n"); + err = -ENODEV; + goto err_out_disable; + } + + if (pci_resource_len(pdev, 0) < (ULI526X_IO_SIZE) ) { + printk(KERN_ERR DRV_NAME ": Allocated I/O size too small\n"); + err = -ENODEV; + goto err_out_disable; + } + + if (pci_request_regions(pdev, DRV_NAME)) { + printk(KERN_ERR DRV_NAME ": Failed to request PCI regions\n"); + err = -ENODEV; + goto err_out_disable; + } + + //add by clearzhang 2004/7/8 + pci_read_config_dword(pdev,0x0,&configval); + m526x_id = configval; + if(configval == 0x526310b9) + { + //printk("is m5263\n"); + pci_read_config_dword(pdev,0x0c,&configval); + configval = ((configval & 0xffff00ff) | 0x8000); + pci_write_config_dword(pdev,0x0c,configval); + } + /* Init system & device */ + db = netdev_priv(dev); + + /* Allocate Tx/Rx descriptor memory */ + db->desc_pool_ptr = pci_alloc_consistent(pdev, sizeof(struct tx_desc) * DESC_ALL_CNT + 0x20, &db->desc_pool_dma_ptr); + db->buf_pool_ptr = pci_alloc_consistent(pdev, TX_BUF_ALLOC * TX_DESC_CNT + 4, &db->buf_pool_dma_ptr); + + db->first_tx_desc = (struct tx_desc *) db->desc_pool_ptr; + db->first_tx_desc_dma = db->desc_pool_dma_ptr; + db->buf_pool_start = db->buf_pool_ptr; + db->buf_pool_dma_start = db->buf_pool_dma_ptr; + + db->chip_id = ent->driver_data; + db->ioaddr = pci_resource_start(pdev, 0); + + db->pdev = pdev; + db->init = 1; + + dev->base_addr = db->ioaddr; + dev->irq = pdev->irq; + pci_set_drvdata(pdev, dev); + + /* Register some necessary functions */ + dev->open = &uli526x_open; + dev->hard_start_xmit = &uli526x_start_xmit; + dev->stop = &uli526x_stop; + dev->get_stats = &uli526x_get_stats; + dev->set_multicast_list = &uli526x_set_filter_mode; + dev->ethtool_ops = &netdev_ethtool_ops; + spin_lock_init(&db->lock); + + + /* read 64 word srom data */ + for (i = 0; i < 64; i++) + ((u16 *) db->srom)[i] = cpu_to_le16(read_srom_word(db->ioaddr, i)); + + /* Set Node address */ + if(((u16 *) db->srom)[0] == 0xffff) /* SROM absent, so read MAC address from ID Table */ + { + outl(0x10000, db->ioaddr + DCR0); //Diagnosis mode + outl(0x1c0, db->ioaddr + DCR13); //Reset dianostic pointer port + outl(0, db->ioaddr + DCR14); //Clear reset port + outl(0x10, db->ioaddr + DCR14); //Reset ID Table pointer + outl(0, db->ioaddr + DCR14); //Clear reset port + outl(0, db->ioaddr + DCR13); //Clear CR13 + outl(0x1b0, db->ioaddr + DCR13); //Select ID Table access port + //Read MAC address from CR14 + for (i = 0; i < 6; i++) + dev->dev_addr[i] = inl(db->ioaddr + DCR14); + //Read end + outl(0, db->ioaddr + DCR13); //Clear CR13 + outl(0, db->ioaddr + DCR0); //Clear CR0 + udelay(10); + } + else /*Exist SROM*/ + { + for (i = 0; i < 6; i++) + dev->dev_addr[i] = db->srom[20 + i]; + } + err = register_netdev (dev); + if (err) + goto err_out_res; + + printk(KERN_INFO "%s: ULi M%04lx at pci%s,",dev->name,ent->driver_data >> 16,pci_name(pdev)); + + for (i = 0; i < 6; i++) + printk("%c%02x", i ? ':' : ' ', dev->dev_addr[i]); + printk(", irq %d.\n", dev->irq); + + pci_set_master(pdev); + + return 0; + +err_out_res: + pci_release_regions(pdev); +err_out_disable: + pci_disable_device(pdev); +err_out_free: + pci_set_drvdata(pdev, NULL); + free_netdev(dev); + + return err; +} + + +static void __devexit uli526x_remove_one (struct pci_dev *pdev) +{ + struct net_device *dev = pci_get_drvdata(pdev); + struct uli526x_board_info *db = netdev_priv(dev); + + ULI526X_DBUG(0, "uli526x_remove_one()", 0); + + if (dev) { + pci_free_consistent(db->pdev, sizeof(struct tx_desc) * + DESC_ALL_CNT + 0x20, db->desc_pool_ptr, + db->desc_pool_dma_ptr); + pci_free_consistent(db->pdev, TX_BUF_ALLOC * TX_DESC_CNT + 4, + db->buf_pool_ptr, db->buf_pool_dma_ptr); + unregister_netdev(dev); + pci_release_regions(pdev); + free_netdev(dev); /* free board information */ + pci_set_drvdata(pdev, NULL); + } + + ULI526X_DBUG(0, "uli526x_remove_one() exit", 0); +} + + +/* + * Open the interface. + * The interface is opened whenever "ifconfig" actives it. + */ + +static int uli526x_open(struct DEVICE *dev) +{ + int ret; + struct uli526x_board_info *db = netdev_priv(dev); + + ULI526X_DBUG(0, "uli526x_open", 0); + + ret = request_irq(dev->irq, &uli526x_interrupt, SA_SHIRQ, dev->name, dev); + if (ret) + return ret; + + /* system variable init */ + db->cr6_data = CR6_DEFAULT | uli526x_cr6_user_set; + if(m526x_id == 0x526310b9) + { + //printk("is 5263\n"); + db->cr6_data = CR6_DEFAULT_A | uli526x_cr6_user_set; + } + db->tx_packet_cnt = 0; + db->rx_avail_cnt = 0; + db->link_failed = 1; + netif_carrier_off(dev); + db->wait_reset = 0; + + db->NIC_capability = 0xf; /* All capability*/ + db->PHY_reg4 = 0x1e0; + + /* CR6 operation mode decision */ + db->cr6_data |= ULI526X_TXTH_256; + db->cr0_data = CR0_DEFAULT; + + /* Initilize ULI526X board */ + uli526x_init(dev); + + /* Active System Interface */ + netif_wake_queue(dev); + + /* set and active a timer process */ + init_timer(&db->timer); + db->timer.expires = ULI526X_TIMER_WUT + HZ * 2; + db->timer.data = (unsigned long)dev; + db->timer.function = &uli526x_timer; + add_timer(&db->timer); + + return 0; +} + + +/* Initilize ULI526X board + * Reset ULI526X board + * Initilize TX/Rx descriptor chain structure + * Send the set-up frame + * Enable Tx/Rx machine + */ + +static void uli526x_init(struct DEVICE *dev) +{ + struct uli526x_board_info *db = netdev_priv(dev); + unsigned long ioaddr = db->ioaddr; + u8 phy_tmp; + u16 phy_value; + u16 phy_reg_reset; + + ULI526X_DBUG(0, "uli526x_init()", 0); + + /* Reset M526x MAC controller */ + outl(ULI526X_RESET, ioaddr + DCR0); /* RESET MAC */ + udelay(100); + outl(db->cr0_data, ioaddr + DCR0); + udelay(5); + + /* Phy addr : In some boards,M5261/M5263 phy address != 1 */ + db->phy_addr = 1; + for(phy_tmp=0;phy_tmp<32;phy_tmp++) + { + phy_value=phy_read(db->ioaddr,phy_tmp,3,db->chip_id);//peer add + if(phy_value != 0xffff&&phy_value!=0) + { + db->phy_addr = phy_tmp; + break; + } + } + if(phy_tmp == 32) + printk(KERN_WARNING "Can not find the phy address!!!"); + /* Parser SROM and media mode */ + db->media_mode = uli526x_media_mode; + + //add by clearzhang 2004/7/8 + /* RESET Phyxcer Chip by GPR port bit 7 */ + //outl(0x180, ioaddr + DCR12); /* Let bit 7 output port */ + //outl(0x0, ioaddr + DCR12); /* Clear RESET signal */ + + /* Phyxcer capability setting */ + phy_reg_reset = phy_read(db->ioaddr, db->phy_addr, 0, db->chip_id); + phy_reg_reset = (phy_reg_reset | 0x8000); + phy_write(db->ioaddr, db->phy_addr, 0, phy_reg_reset, db->chip_id); + udelay(500); + + /* Process Phyxcer Media Mode */ + uli526x_set_phyxcer(db); + + /* Media Mode Process */ + if ( !(db->media_mode & ULI526X_AUTO) ) + db->op_mode = db->media_mode; /* Force Mode */ + + /* Initiliaze Transmit/Receive decriptor and CR3/4 */ + uli526x_descriptor_init(db, ioaddr); + + /* Init CR6 to program M526X operation */ + update_cr6(db->cr6_data, ioaddr); + + /* Send setup frame */ + send_filter_frame(dev, dev->mc_count); /* M5261/M5263 */ + + /* Init CR7, interrupt active bit */ + db->cr7_data = CR7_DEFAULT; + outl(db->cr7_data, ioaddr + DCR7); + + /* Init CR15, Tx jabber and Rx watchdog timer */ + outl(db->cr15_data, ioaddr + DCR15); + + /* Enable ULI526X Tx/Rx function */ + db->cr6_data |= CR6_RXSC | CR6_TXSC; + update_cr6(db->cr6_data, ioaddr); +} + + +/* + * Hardware start transmission. + * Send a packet to media from the upper layer. + */ + +static int uli526x_start_xmit(struct sk_buff *skb, struct DEVICE *dev) +{ + struct uli526x_board_info *db = netdev_priv(dev); + struct tx_desc *txptr; + unsigned long flags; + + ULI526X_DBUG(0, "uli526x_start_xmit", 0); + + /* Resource flag check */ + netif_stop_queue(dev); + + /* Too large packet check */ + if (skb->len > MAX_PACKET_SIZE) { + printk(KERN_ERR DRV_NAME ": big packet = %d\n", (u16)skb->len); + dev_kfree_skb(skb); + return 0; + } + + spin_lock_irqsave(&db->lock, flags); + + /* No Tx resource check, it never happen nromally */ + if (db->tx_packet_cnt >= TX_FREE_DESC_CNT) { + spin_unlock_irqrestore(&db->lock, flags); + printk(KERN_ERR DRV_NAME ": No Tx resource %ld\n", db->tx_packet_cnt); + return 1; + } + + /* Disable NIC interrupt */ + outl(0, dev->base_addr + DCR7); + + /* transmit this packet */ + txptr = db->tx_insert_ptr; + memcpy(txptr->tx_buf_ptr, skb->data, skb->len); + txptr->tdes1 = cpu_to_le32(0xe1000000 | skb->len); + + /* Point to next transmit free descriptor */ + db->tx_insert_ptr = txptr->next_tx_desc; + + /* Transmit Packet Process */ + if ( (db->tx_packet_cnt < TX_DESC_CNT) ) { + txptr->tdes0 = cpu_to_le32(0x80000000); /* Set owner bit */ + db->tx_packet_cnt++; /* Ready to send */ + outl(0x1, dev->base_addr + DCR1); /* Issue Tx polling */ + dev->trans_start = jiffies; /* saved time stamp */ + } + + /* Tx resource check */ + if ( db->tx_packet_cnt < TX_FREE_DESC_CNT ) + netif_wake_queue(dev); + + /* Restore CR7 to enable interrupt */ + spin_unlock_irqrestore(&db->lock, flags); + outl(db->cr7_data, dev->base_addr + DCR7); + + /* free this SKB */ + dev_kfree_skb(skb); + + return 0; +} + + +/* + * Stop the interface. + * The interface is stopped when it is brought. + */ + +static int uli526x_stop(struct DEVICE *dev) +{ + struct uli526x_board_info *db = netdev_priv(dev); + unsigned long ioaddr = dev->base_addr; + + ULI526X_DBUG(0, "uli526x_stop", 0); + + /* disable system */ + netif_stop_queue(dev); + + /* deleted timer */ + del_timer_sync(&db->timer); + + /* Reset & stop ULI526X board */ + outl(ULI526X_RESET, ioaddr + DCR0); + udelay(5); + phy_write(db->ioaddr, db->phy_addr, 0, 0x8000, db->chip_id); + + /* free interrupt */ + free_irq(dev->irq, dev); + + /* free allocated rx buffer */ + uli526x_free_rxbuffer(db); + +#if 0 + /* show statistic counter */ + printk(DRV_NAME ": FU:%lx EC:%lx LC:%lx NC:%lx LOC:%lx TXJT:%lx RESET:%lx RCR8:%lx FAL:%lx TT:%lx\n", + db->tx_fifo_underrun, db->tx_excessive_collision, + db->tx_late_collision, db->tx_no_carrier, db->tx_loss_carrier, + db->tx_jabber_timeout, db->reset_count, db->reset_cr8, + db->reset_fatal, db->reset_TXtimeout); +#endif + + return 0; +} + + +/* + * M5261/M5263 insterrupt handler + * receive the packet to upper layer, free the transmitted packet + */ + +static irqreturn_t uli526x_interrupt(int irq, void *dev_id, struct pt_regs *regs) +{ + struct DEVICE *dev = dev_id; + struct uli526x_board_info *db = netdev_priv(dev); + unsigned long ioaddr = dev->base_addr; + unsigned long flags; + + //ULI526X_DBUG(0, "uli526x_interrupt()", 0); + + if (!dev) { + ULI526X_DBUG(1, "uli526x_interrupt() without DEVICE arg", 0); + return IRQ_NONE; + } + + //outl(0, ioaddr + DCR7); + spin_lock_irqsave(&db->lock, flags); + outl(0, ioaddr + DCR7); + + /* Got ULI526X status */ + db->cr5_data = inl(ioaddr + DCR5); + outl(db->cr5_data, ioaddr + DCR5); + if ( !(db->cr5_data & 0x180c1) ) { + spin_unlock_irqrestore(&db->lock, flags); + outl(db->cr7_data, ioaddr + DCR7); + return IRQ_HANDLED; + } + + /* Disable all interrupt in CR7 to solve the interrupt edge problem */ + //outl(0, ioaddr + DCR7); + + /* Check system status */ + if (db->cr5_data & 0x2000) { + /* system bus error happen */ + ULI526X_DBUG(1, "System bus error happen. CR5=", db->cr5_data); + db->reset_fatal++; + db->wait_reset = 1; /* Need to RESET */ + spin_unlock_irqrestore(&db->lock, flags); + return IRQ_HANDLED; + } + + /* Received the coming packet */ + if ( (db->cr5_data & 0x40) && db->rx_avail_cnt ) + uli526x_rx_packet(dev, db); + + /* reallocate rx descriptor buffer */ + if (db->rx_avail_cntcr5_data & 0x01) + uli526x_free_tx_pkt(dev, db); + + /* Restore CR7 to enable interrupt mask */ + outl(db->cr7_data, ioaddr + DCR7); + + spin_unlock_irqrestore(&db->lock, flags); + return IRQ_HANDLED; +} + + +/* + * Free TX resource after TX complete + */ + +static void uli526x_free_tx_pkt(struct DEVICE *dev, struct uli526x_board_info * db) +{ + struct tx_desc *txptr; +// unsigned long ioaddr = dev->base_addr; + u32 tdes0; + + txptr = db->tx_remove_ptr; + while(db->tx_packet_cnt) { + tdes0 = le32_to_cpu(txptr->tdes0); + /* printk(DRV_NAME ": tdes0=%x\n", tdes0); */ + if (tdes0 & 0x80000000) + break; + + /* A packet sent completed */ + db->tx_packet_cnt--; + db->stats.tx_packets++; + + /* Transmit statistic counter */ + if ( tdes0 != 0x7fffffff ) { + /* printk(DRV_NAME ": tdes0=%x\n", tdes0); */ + db->stats.collisions += (tdes0 >> 3) & 0xf; + db->stats.tx_bytes += le32_to_cpu(txptr->tdes1) & 0x7ff; + if (tdes0 & TDES0_ERR_MASK) { + db->stats.tx_errors++; + if (tdes0 & 0x0002) { /* UnderRun */ + db->tx_fifo_underrun++; + if ( !(db->cr6_data & CR6_SFT) ) { + db->cr6_data = db->cr6_data | CR6_SFT; + update_cr6(db->cr6_data, db->ioaddr); + } + } + if (tdes0 & 0x0100) + db->tx_excessive_collision++; + if (tdes0 & 0x0200) + db->tx_late_collision++; + if (tdes0 & 0x0400) + db->tx_no_carrier++; + if (tdes0 & 0x0800) + db->tx_loss_carrier++; + if (tdes0 & 0x4000) + db->tx_jabber_timeout++; + } + } + + txptr = txptr->next_tx_desc; + }/* End of while */ + + /* Update TX remove pointer to next */ + db->tx_remove_ptr = txptr; + + /* Resource available check */ + if ( db->tx_packet_cnt < TX_WAKE_DESC_CNT ) + netif_wake_queue(dev); /* Active upper layer, send again */ +} + + +/* + * Receive the come packet and pass to upper layer + */ + +static void uli526x_rx_packet(struct DEVICE *dev, struct uli526x_board_info * db) +{ + struct rx_desc *rxptr; + struct sk_buff *skb; + int rxlen; + u32 rdes0; + + rxptr = db->rx_ready_ptr; + + while(db->rx_avail_cnt) { + rdes0 = le32_to_cpu(rxptr->rdes0); + if (rdes0 & 0x80000000) /* packet owner check */ + { + break; + } + + db->rx_avail_cnt--; + db->interval_rx_cnt++; + + pci_unmap_single(db->pdev, le32_to_cpu(rxptr->rdes2), RX_ALLOC_SIZE, PCI_DMA_FROMDEVICE); + if ( (rdes0 & 0x300) != 0x300) { + /* A packet without First/Last flag */ + /* reuse this SKB */ + ULI526X_DBUG(0, "Reuse SK buffer, rdes0", rdes0); + uli526x_reuse_skb(db, rxptr->rx_skb_ptr); + } else { + /* A packet with First/Last flag */ + rxlen = ( (rdes0 >> 16) & 0x3fff) - 4; + + /* error summary bit check */ + if (rdes0 & 0x8000) { + /* This is a error packet */ + //printk(DRV_NAME ": rdes0: %lx\n", rdes0); + db->stats.rx_errors++; + if (rdes0 & 1) + db->stats.rx_fifo_errors++; + if (rdes0 & 2) + db->stats.rx_crc_errors++; + if (rdes0 & 0x80) + db->stats.rx_length_errors++; + } + + if ( !(rdes0 & 0x8000) || + ((db->cr6_data & CR6_PM) && (rxlen>6)) ) { + skb = rxptr->rx_skb_ptr; + + /* Good packet, send to upper layer */ + /* Shorst packet used new SKB */ + if ( (rxlen < RX_COPY_SIZE) && + ( (skb = dev_alloc_skb(rxlen + 2) ) + != NULL) ) { + /* size less than COPY_SIZE, allocate a rxlen SKB */ + skb->dev = dev; + skb_reserve(skb, 2); /* 16byte align */ + memcpy(skb_put(skb, rxlen), rxptr->rx_skb_ptr->tail, rxlen); + uli526x_reuse_skb(db, rxptr->rx_skb_ptr); + } else { + skb->dev = dev; + skb_put(skb, rxlen); + } + skb->protocol = eth_type_trans(skb, dev); + netif_rx(skb); + dev->last_rx = jiffies; + db->stats.rx_packets++; + db->stats.rx_bytes += rxlen; + + } else { + /* Reuse SKB buffer when the packet is error */ + ULI526X_DBUG(0, "Reuse SK buffer, rdes0", rdes0); + uli526x_reuse_skb(db, rxptr->rx_skb_ptr); + } + } + + rxptr = rxptr->next_rx_desc; + } + + db->rx_ready_ptr = rxptr; +} + + +/* + * Get statistics from driver. + */ + +static struct net_device_stats * uli526x_get_stats(struct DEVICE *dev) +{ + struct uli526x_board_info *db = netdev_priv(dev); + + ULI526X_DBUG(0, "uli526x_get_stats", 0); + return &db->stats; +} + + +/* + * Set ULI526X multicast address + */ + +static void uli526x_set_filter_mode(struct DEVICE * dev) +{ + struct uli526x_board_info *db = dev->priv; + unsigned long flags; + + ULI526X_DBUG(0, "uli526x_set_filter_mode()", 0); + spin_lock_irqsave(&db->lock, flags); + + if (dev->flags & IFF_PROMISC) { + ULI526X_DBUG(0, "Enable PROM Mode", 0); + db->cr6_data |= CR6_PM | CR6_PBF; + update_cr6(db->cr6_data, db->ioaddr); + spin_unlock_irqrestore(&db->lock, flags); + return; + } + + if (dev->flags & IFF_ALLMULTI || dev->mc_count > ULI5261_MAX_MULTICAST) { + ULI526X_DBUG(0, "Pass all multicast address", dev->mc_count); + db->cr6_data &= ~(CR6_PM | CR6_PBF); + db->cr6_data |= CR6_PAM; + spin_unlock_irqrestore(&db->lock, flags); + return; + } + + ULI526X_DBUG(0, "Set multicast address", dev->mc_count); + send_filter_frame(dev, dev->mc_count); /* M5261/M5263 */ + spin_unlock_irqrestore(&db->lock, flags); +} + +static void +ULi_ethtool_gset(struct uli526x_board_info *db, struct ethtool_cmd *ecmd) +{ + //struct e1000_hw *hw = &adapter->hw; + + { + + ecmd->supported = (SUPPORTED_10baseT_Half | + SUPPORTED_10baseT_Full | + SUPPORTED_100baseT_Half | + SUPPORTED_100baseT_Full | + SUPPORTED_Autoneg | + SUPPORTED_MII); + + ecmd->advertising = (ADVERTISED_10baseT_Half | + ADVERTISED_10baseT_Full | + ADVERTISED_100baseT_Half | + ADVERTISED_100baseT_Full | + ADVERTISED_Autoneg | + ADVERTISED_MII); + + + ecmd->port = PORT_MII; + ecmd->phy_address = db->phy_addr; + + ecmd->transceiver = XCVR_EXTERNAL; + + + } + + + ecmd->speed = 10; + ecmd->duplex = DUPLEX_HALF; + + if(db->op_mode==ULI526X_100MHF || db->op_mode==ULI526X_100MFD) + { + ecmd->speed = 100; + } + if(db->op_mode==ULI526X_10MFD || db->op_mode==ULI526X_100MFD) + { + ecmd->duplex = DUPLEX_FULL; + } + if(db->link_failed) + { + ecmd->speed = -1; + ecmd->duplex = -1; + } + + if (db->media_mode & ULI526X_AUTO) + { + ecmd->autoneg = AUTONEG_ENABLE; + } + + +} + +static void netdev_get_drvinfo(struct net_device *dev, + struct ethtool_drvinfo *info) +{ + struct uli526x_board_info *np = netdev_priv(dev); + + strcpy(info->driver, DRV_NAME); + strcpy(info->version, DRV_VERSION); + if (np->pdev) + strcpy(info->bus_info, pci_name(np->pdev)); + else + sprintf(info->bus_info, "EISA 0x%lx %d", + dev->base_addr, dev->irq); +} + +static int netdev_get_settings(struct net_device *dev, struct ethtool_cmd *cmd) { + struct uli526x_board_info *np = netdev_priv(dev); + + ULi_ethtool_gset(np, cmd); + + return 0; +} + +static u32 netdev_get_link(struct net_device *dev) { + struct uli526x_board_info *np = netdev_priv(dev); + + if(np->link_failed) + return 0; + else + return 1; +} + +static void uli526x_get_wol(struct net_device *dev, struct ethtool_wolinfo *wol) +{ + wol->supported = WAKE_PHY | WAKE_MAGIC; + wol->wolopts = 0; +} + +static struct ethtool_ops netdev_ethtool_ops = { + .get_drvinfo = netdev_get_drvinfo, + .get_settings = netdev_get_settings, + .get_link = netdev_get_link, + .get_wol = uli526x_get_wol, +}; + +/* + * A periodic timer routine + * Dynamic media sense, allocate Rx buffer... + */ + +static void uli526x_timer(unsigned long data) +{ + u32 tmp_cr8; + unsigned char tmp_cr12=0; + struct DEVICE *dev = (struct DEVICE *) data; + struct uli526x_board_info *db = netdev_priv(dev); + unsigned long flags; + u8 TmpSpeed=10; + + //ULI526X_DBUG(0, "uli526x_timer()", 0); + spin_lock_irqsave(&db->lock, flags); + + + /* Dynamic reset ULI526X : system error or transmit time-out */ + tmp_cr8 = inl(db->ioaddr + DCR8); + if ( (db->interval_rx_cnt==0) && (tmp_cr8) ) { + db->reset_cr8++; + db->wait_reset = 1; + } + db->interval_rx_cnt = 0; + + /* TX polling kick monitor */ + if ( db->tx_packet_cnt && + time_after(jiffies, dev->trans_start + ULI526X_TX_KICK) ) { + outl(0x1, dev->base_addr + DCR1); // Tx polling again + + // TX Timeout + if ( time_after(jiffies, dev->trans_start + ULI526X_TX_TIMEOUT) ) { + db->reset_TXtimeout++; + db->wait_reset = 1; + printk( "%s: Tx timeout - resetting\n", + dev->name); + } + } + + if (db->wait_reset) { + ULI526X_DBUG(0, "Dynamic Reset device", db->tx_packet_cnt); + db->reset_count++; + uli526x_dynamic_reset(dev); + db->timer.expires = ULI526X_TIMER_WUT; + add_timer(&db->timer); + spin_unlock_irqrestore(&db->lock, flags); + return; + } + + /* Link status check, Dynamic media type change */ + if((phy_read(db->ioaddr, db->phy_addr, 5, db->chip_id) & 0x01e0)!=0) + tmp_cr12 = 3; + + if ( !(tmp_cr12 & 0x3) && !db->link_failed ) { + /* Link Failed */ + ULI526X_DBUG(0, "Link Failed", tmp_cr12); + netif_carrier_off(dev); + printk(KERN_INFO "uli526x: %s NIC Link is Down\n",dev->name); + db->link_failed = 1; + + /* For Force 10/100M Half/Full mode: Enable Auto-Nego mode */ + /* AUTO don't need */ + if ( !(db->media_mode & 0x8) ) + phy_write(db->ioaddr, db->phy_addr, 0, 0x1000, db->chip_id); + + /* AUTO mode, if INT phyxcer link failed, select EXT device */ + if (db->media_mode & ULI526X_AUTO) { + db->cr6_data&=~0x00000200; /* bit9=0, HD mode */ + update_cr6(db->cr6_data, db->ioaddr); + } + } else + if ((tmp_cr12 & 0x3) && db->link_failed) { + ULI526X_DBUG(0, "Link link OK", tmp_cr12); + db->link_failed = 0; + + /* Auto Sense Speed */ + if ( (db->media_mode & ULI526X_AUTO) && + uli526x_sense_speed(db) ) + db->link_failed = 1; + uli526x_process_mode(db); + + if(db->link_failed==0) + { + if(db->op_mode==ULI526X_100MHF || db->op_mode==ULI526X_100MFD) + { + TmpSpeed = 100; + } + if(db->op_mode==ULI526X_10MFD || db->op_mode==ULI526X_100MFD) + { + printk(KERN_INFO "uli526x: %s NIC Link is Up %d Mbps Full duplex\n",dev->name,TmpSpeed); + } + else + { + printk(KERN_INFO "uli526x: %s NIC Link is Up %d Mbps Half duplex\n",dev->name,TmpSpeed); + } + netif_carrier_on(dev); + } + /* SHOW_MEDIA_TYPE(db->op_mode); */ + } + else if(!(tmp_cr12 & 0x3) && db->link_failed) + { + if(db->init==1) + { + printk(KERN_INFO "uli526x: %s NIC Link is Down\n",dev->name); + netif_carrier_off(dev); + } + } + db->init=0; + + /* Timer active again */ + db->timer.expires = ULI526X_TIMER_WUT; + add_timer(&db->timer); + spin_unlock_irqrestore(&db->lock, flags); +} + + +/* + * Dynamic reset the ULI526X board + * Stop ULI526X board + * Free Tx/Rx allocated memory + * Reset ULI526X board + * Re-initilize ULI526X board + */ + +static void uli526x_dynamic_reset(struct DEVICE *dev) +{ + struct uli526x_board_info *db = netdev_priv(dev); + + ULI526X_DBUG(0, "uli526x_dynamic_reset()", 0); + + /* Sopt MAC controller */ + db->cr6_data &= ~(CR6_RXSC | CR6_TXSC); /* Disable Tx/Rx */ + update_cr6(db->cr6_data, dev->base_addr); + outl(0, dev->base_addr + DCR7); /* Disable Interrupt */ + outl(inl(dev->base_addr + DCR5), dev->base_addr + DCR5); + + /* Disable upper layer interface */ + netif_stop_queue(dev); + + /* Free Rx Allocate buffer */ + uli526x_free_rxbuffer(db); + + /* system variable init */ + db->tx_packet_cnt = 0; + db->rx_avail_cnt = 0; + db->link_failed = 1; + db->init=1; + db->wait_reset = 0; + + /* Re-initilize ULI526X board */ + uli526x_init(dev); + + /* Restart upper layer interface */ + netif_wake_queue(dev); +} + + +/* + * free all allocated rx buffer + */ + +static void uli526x_free_rxbuffer(struct uli526x_board_info * db) +{ + ULI526X_DBUG(0, "uli526x_free_rxbuffer()", 0); + + /* free allocated rx buffer */ + while (db->rx_avail_cnt) { + dev_kfree_skb(db->rx_ready_ptr->rx_skb_ptr); + db->rx_ready_ptr = db->rx_ready_ptr->next_rx_desc; + db->rx_avail_cnt--; + } +} + + +/* + * Reuse the SK buffer + */ + +static void uli526x_reuse_skb(struct uli526x_board_info *db, struct sk_buff * skb) +{ + struct rx_desc *rxptr = db->rx_insert_ptr; + + if (!(rxptr->rdes0 & cpu_to_le32(0x80000000))) { + rxptr->rx_skb_ptr = skb; + rxptr->rdes2 = cpu_to_le32( pci_map_single(db->pdev, skb->tail, RX_ALLOC_SIZE, PCI_DMA_FROMDEVICE) ); + wmb(); + rxptr->rdes0 = cpu_to_le32(0x80000000); + db->rx_avail_cnt++; + db->rx_insert_ptr = rxptr->next_rx_desc; + } else + ULI526X_DBUG(0, "SK Buffer reuse method error", db->rx_avail_cnt); +} + + +/* + * Initialize transmit/Receive descriptor + * Using Chain structure, and allocate Tx/Rx buffer + */ + +static void uli526x_descriptor_init(struct uli526x_board_info *db, unsigned long ioaddr) +{ + struct tx_desc *tmp_tx; + struct rx_desc *tmp_rx; + unsigned char *tmp_buf; + dma_addr_t tmp_tx_dma, tmp_rx_dma; + dma_addr_t tmp_buf_dma; + int i; + + ULI526X_DBUG(0, "uli526x_descriptor_init()", 0); + + /* tx descriptor start pointer */ + db->tx_insert_ptr = db->first_tx_desc; + db->tx_remove_ptr = db->first_tx_desc; + outl(db->first_tx_desc_dma, ioaddr + DCR4); /* TX DESC address */ + + /* rx descriptor start pointer */ + db->first_rx_desc = (void *)db->first_tx_desc + sizeof(struct tx_desc) * TX_DESC_CNT; + db->first_rx_desc_dma = db->first_tx_desc_dma + sizeof(struct tx_desc) * TX_DESC_CNT; + db->rx_insert_ptr = db->first_rx_desc; + db->rx_ready_ptr = db->first_rx_desc; + outl(db->first_rx_desc_dma, ioaddr + DCR3); /* RX DESC address */ + + /* Init Transmit chain */ + tmp_buf = db->buf_pool_start; + tmp_buf_dma = db->buf_pool_dma_start; + tmp_tx_dma = db->first_tx_desc_dma; + for (tmp_tx = db->first_tx_desc, i = 0; i < TX_DESC_CNT; i++, tmp_tx++) { + tmp_tx->tx_buf_ptr = tmp_buf; + tmp_tx->tdes0 = cpu_to_le32(0); + tmp_tx->tdes1 = cpu_to_le32(0x81000000); /* IC, chain */ + tmp_tx->tdes2 = cpu_to_le32(tmp_buf_dma); + tmp_tx_dma += sizeof(struct tx_desc); + tmp_tx->tdes3 = cpu_to_le32(tmp_tx_dma); + tmp_tx->next_tx_desc = tmp_tx + 1; + tmp_buf = tmp_buf + TX_BUF_ALLOC; + tmp_buf_dma = tmp_buf_dma + TX_BUF_ALLOC; + } + (--tmp_tx)->tdes3 = cpu_to_le32(db->first_tx_desc_dma); + tmp_tx->next_tx_desc = db->first_tx_desc; + + /* Init Receive descriptor chain */ + tmp_rx_dma=db->first_rx_desc_dma; + for (tmp_rx = db->first_rx_desc, i = 0; i < RX_DESC_CNT; i++, tmp_rx++) { + tmp_rx->rdes0 = cpu_to_le32(0); + tmp_rx->rdes1 = cpu_to_le32(0x01000600); + tmp_rx_dma += sizeof(struct rx_desc); + tmp_rx->rdes3 = cpu_to_le32(tmp_rx_dma); + tmp_rx->next_rx_desc = tmp_rx + 1; + } + (--tmp_rx)->rdes3 = cpu_to_le32(db->first_rx_desc_dma); + tmp_rx->next_rx_desc = db->first_rx_desc; + + /* pre-allocate Rx buffer */ + allocate_rx_buffer(db); +} + + +/* + * Update CR6 value + * Firstly stop ULI526X , then written value and start + */ + +static void update_cr6(u32 cr6_data, unsigned long ioaddr) +{ + + outl(cr6_data, ioaddr + DCR6); + udelay(5); +} + + +/* + * Send a setup frame for M5261/M5263 + * This setup frame initilize ULI526X address filter mode + */ + +static void send_filter_frame(struct DEVICE *dev, int mc_cnt) +{ + struct uli526x_board_info *db = netdev_priv(dev); + struct dev_mc_list *mcptr; + struct tx_desc *txptr; + u16 * addrptr; + u32 * suptr; + int i; + + ULI526X_DBUG(0, "send_filter_frame()", 0); + + txptr = db->tx_insert_ptr; + suptr = (u32 *) txptr->tx_buf_ptr; + + /* Node address */ + addrptr = (u16 *) dev->dev_addr; + *suptr++ = addrptr[0]; + *suptr++ = addrptr[1]; + *suptr++ = addrptr[2]; + + /* broadcast address */ + *suptr++ = 0xffff; + *suptr++ = 0xffff; + *suptr++ = 0xffff; + + /* fit the multicast address */ + for (mcptr = dev->mc_list, i = 0; i < mc_cnt; i++, mcptr = mcptr->next) { + addrptr = (u16 *) mcptr->dmi_addr; + *suptr++ = addrptr[0]; + *suptr++ = addrptr[1]; + *suptr++ = addrptr[2]; + } + + for (; i<14; i++) { + *suptr++ = 0xffff; + *suptr++ = 0xffff; + *suptr++ = 0xffff; + } + + /* prepare the setup frame */ + db->tx_insert_ptr = txptr->next_tx_desc; + txptr->tdes1 = cpu_to_le32(0x890000c0); + + /* Resource Check and Send the setup packet */ + if (db->tx_packet_cnt < TX_DESC_CNT) { + /* Resource Empty */ + db->tx_packet_cnt++; + txptr->tdes0 = cpu_to_le32(0x80000000); + update_cr6(db->cr6_data | 0x2000, dev->base_addr); + outl(0x1, dev->base_addr + DCR1); /* Issue Tx polling */ + update_cr6(db->cr6_data, dev->base_addr); + dev->trans_start = jiffies; + } else + printk(KERN_ERR DRV_NAME ": No Tx resource - Send_filter_frame!\n"); +} + + +/* + * Allocate rx buffer, + * As possible as allocate maxiumn Rx buffer + */ + +static void allocate_rx_buffer(struct uli526x_board_info *db) +{ + struct rx_desc *rxptr; + struct sk_buff *skb; + + rxptr = db->rx_insert_ptr; + + while(db->rx_avail_cnt < RX_DESC_CNT) { + if ( ( skb = dev_alloc_skb(RX_ALLOC_SIZE) ) == NULL ) + break; + rxptr->rx_skb_ptr = skb; /* FIXME (?) */ + rxptr->rdes2 = cpu_to_le32( pci_map_single(db->pdev, skb->tail, RX_ALLOC_SIZE, PCI_DMA_FROMDEVICE) ); + wmb(); + rxptr->rdes0 = cpu_to_le32(0x80000000); + rxptr = rxptr->next_rx_desc; + db->rx_avail_cnt++; + } + + db->rx_insert_ptr = rxptr; +} + + +/* + * Read one word data from the serial ROM + */ + +static u16 read_srom_word(long ioaddr, int offset) +{ + int i; + u16 srom_data = 0; + long cr9_ioaddr = ioaddr + DCR9; + + outl(CR9_SROM_READ, cr9_ioaddr); + outl(CR9_SROM_READ | CR9_SRCS, cr9_ioaddr); + + /* Send the Read Command 110b */ + SROM_CLK_WRITE(SROM_DATA_1, cr9_ioaddr); + SROM_CLK_WRITE(SROM_DATA_1, cr9_ioaddr); + SROM_CLK_WRITE(SROM_DATA_0, cr9_ioaddr); + + /* Send the offset */ + for (i = 5; i >= 0; i--) { + srom_data = (offset & (1 << i)) ? SROM_DATA_1 : SROM_DATA_0; + SROM_CLK_WRITE(srom_data, cr9_ioaddr); + } + + outl(CR9_SROM_READ | CR9_SRCS, cr9_ioaddr); + + for (i = 16; i > 0; i--) { + outl(CR9_SROM_READ | CR9_SRCS | CR9_SRCLK, cr9_ioaddr); + udelay(5); + srom_data = (srom_data << 1) | ((inl(cr9_ioaddr) & CR9_CRDOUT) ? 1 : 0); + outl(CR9_SROM_READ | CR9_SRCS, cr9_ioaddr); + udelay(5); + } + + outl(CR9_SROM_READ, cr9_ioaddr); + return srom_data; +} + + +/* + * Auto sense the media mode + */ + +static u8 uli526x_sense_speed(struct uli526x_board_info * db) +{ + u8 ErrFlag = 0; + u16 phy_mode; + + phy_mode = phy_read(db->ioaddr, db->phy_addr, 1, db->chip_id); + phy_mode = phy_read(db->ioaddr, db->phy_addr, 1, db->chip_id); + + if ( (phy_mode & 0x24) == 0x24 ) { + + phy_mode = ((phy_read(db->ioaddr, db->phy_addr, 5, db->chip_id) & 0x01e0)<<7); + if(phy_mode&0x8000) + phy_mode = 0x8000; + else if(phy_mode&0x4000) + phy_mode = 0x4000; + else if(phy_mode&0x2000) + phy_mode = 0x2000; + else + phy_mode = 0x1000; + + /* printk(DRV_NAME ": Phy_mode %x ",phy_mode); */ + switch (phy_mode) { + case 0x1000: db->op_mode = ULI526X_10MHF; break; + case 0x2000: db->op_mode = ULI526X_10MFD; break; + case 0x4000: db->op_mode = ULI526X_100MHF; break; + case 0x8000: db->op_mode = ULI526X_100MFD; break; + default: db->op_mode = ULI526X_10MHF; ErrFlag = 1; break; + } + } else { + db->op_mode = ULI526X_10MHF; + ULI526X_DBUG(0, "Link Failed :", phy_mode); + ErrFlag = 1; + } + + return ErrFlag; +} + + +/* + * Set 10/100 phyxcer capability + * AUTO mode : phyxcer register4 is NIC capability + * Force mode: phyxcer register4 is the force media + */ + +static void uli526x_set_phyxcer(struct uli526x_board_info *db) +{ + u16 phy_reg; + + /* Phyxcer capability setting */ + phy_reg = phy_read(db->ioaddr, db->phy_addr, 4, db->chip_id) & ~0x01e0; + + if (db->media_mode & ULI526X_AUTO) { + /* AUTO Mode */ + phy_reg |= db->PHY_reg4; + } else { + /* Force Mode */ + switch(db->media_mode) { + case ULI526X_10MHF: phy_reg |= 0x20; break; + case ULI526X_10MFD: phy_reg |= 0x40; break; + case ULI526X_100MHF: phy_reg |= 0x80; break; + case ULI526X_100MFD: phy_reg |= 0x100; break; + } + + } + + /* Write new capability to Phyxcer Reg4 */ + if ( !(phy_reg & 0x01e0)) { + phy_reg|=db->PHY_reg4; + db->media_mode|=ULI526X_AUTO; + } + phy_write(db->ioaddr, db->phy_addr, 4, phy_reg, db->chip_id); + + /* Restart Auto-Negotiation */ + phy_write(db->ioaddr, db->phy_addr, 0, 0x1200, db->chip_id); + udelay(50); +} + + +/* + * Process op-mode + AUTO mode : PHY controller in Auto-negotiation Mode + * Force mode: PHY controller in force mode with HUB + * N-way force capability with SWITCH + */ + +static void uli526x_process_mode(struct uli526x_board_info *db) +{ + u16 phy_reg; + + /* Full Duplex Mode Check */ + if (db->op_mode & 0x4) + db->cr6_data |= CR6_FDM; /* Set Full Duplex Bit */ + else + db->cr6_data &= ~CR6_FDM; /* Clear Full Duplex Bit */ + + update_cr6(db->cr6_data, db->ioaddr); + + /* 10/100M phyxcer force mode need */ + if ( !(db->media_mode & 0x8)) { + /* Forece Mode */ + phy_reg = phy_read(db->ioaddr, db->phy_addr, 6, db->chip_id); + if ( !(phy_reg & 0x1) ) { + /* parter without N-Way capability */ + phy_reg = 0x0; + switch(db->op_mode) { + case ULI526X_10MHF: phy_reg = 0x0; break; + case ULI526X_10MFD: phy_reg = 0x100; break; + case ULI526X_100MHF: phy_reg = 0x2000; break; + case ULI526X_100MFD: phy_reg = 0x2100; break; + } + phy_write(db->ioaddr, db->phy_addr, 0, phy_reg, db->chip_id); + phy_write(db->ioaddr, db->phy_addr, 0, phy_reg, db->chip_id); + } + } +} + + +/* + * Write a word to Phy register + */ + +static void phy_write(unsigned long iobase, u8 phy_addr, u8 offset, u16 phy_data, u32 chip_id) +{ + u16 i; + unsigned long ioaddr; + + if(chip_id == PCI_ULI5263_ID) + { + phy_writeby_cr10(iobase, phy_addr, offset, phy_data); + return; + } + /* M5261/M5263 Chip */ + ioaddr = iobase + DCR9; + + /* Send 33 synchronization clock to Phy controller */ + for (i = 0; i < 35; i++) + phy_write_1bit(ioaddr, PHY_DATA_1, chip_id); + + /* Send start command(01) to Phy */ + phy_write_1bit(ioaddr, PHY_DATA_0, chip_id); + phy_write_1bit(ioaddr, PHY_DATA_1, chip_id); + + /* Send write command(01) to Phy */ + phy_write_1bit(ioaddr, PHY_DATA_0, chip_id); + phy_write_1bit(ioaddr, PHY_DATA_1, chip_id); + + /* Send Phy address */ + for (i = 0x10; i > 0; i = i >> 1) + phy_write_1bit(ioaddr, phy_addr & i ? PHY_DATA_1 : PHY_DATA_0, chip_id); + + /* Send register address */ + for (i = 0x10; i > 0; i = i >> 1) + phy_write_1bit(ioaddr, offset & i ? PHY_DATA_1 : PHY_DATA_0, chip_id); + + /* written trasnition */ + phy_write_1bit(ioaddr, PHY_DATA_1, chip_id); + phy_write_1bit(ioaddr, PHY_DATA_0, chip_id); + + /* Write a word data to PHY controller */ + for ( i = 0x8000; i > 0; i >>= 1) + phy_write_1bit(ioaddr, phy_data & i ? PHY_DATA_1 : PHY_DATA_0, chip_id); + +} + + +/* + * Read a word data from phy register + */ + +static u16 phy_read(unsigned long iobase, u8 phy_addr, u8 offset, u32 chip_id) +{ + int i; + u16 phy_data; + unsigned long ioaddr; + + if(chip_id == PCI_ULI5263_ID) + return phy_readby_cr10(iobase, phy_addr, offset); + /* M5261/M5263 Chip */ + ioaddr = iobase + DCR9; + + /* Send 33 synchronization clock to Phy controller */ + for (i = 0; i < 35; i++) + phy_write_1bit(ioaddr, PHY_DATA_1, chip_id); + + /* Send start command(01) to Phy */ + phy_write_1bit(ioaddr, PHY_DATA_0, chip_id); + phy_write_1bit(ioaddr, PHY_DATA_1, chip_id); + + /* Send read command(10) to Phy */ + phy_write_1bit(ioaddr, PHY_DATA_1, chip_id); + phy_write_1bit(ioaddr, PHY_DATA_0, chip_id); + + /* Send Phy address */ + for (i = 0x10; i > 0; i = i >> 1) + phy_write_1bit(ioaddr, phy_addr & i ? PHY_DATA_1 : PHY_DATA_0, chip_id); + + /* Send register address */ + for (i = 0x10; i > 0; i = i >> 1) + phy_write_1bit(ioaddr, offset & i ? PHY_DATA_1 : PHY_DATA_0, chip_id); + + /* Skip transition state */ + phy_read_1bit(ioaddr, chip_id); + + /* read 16bit data */ + for (phy_data = 0, i = 0; i < 16; i++) { + phy_data <<= 1; + phy_data |= phy_read_1bit(ioaddr, chip_id); + } + + return phy_data; +} + +static u16 phy_readby_cr10(unsigned long iobase, u8 phy_addr, u8 offset) +{ + unsigned long ioaddr,cr10_value; + + ioaddr = iobase + DCR10; + cr10_value = phy_addr; + cr10_value = (cr10_value<<5) + offset; + cr10_value = (cr10_value<<16) + 0x08000000; + outl(cr10_value,ioaddr); + udelay(1); + while(1) + { + cr10_value = inl(ioaddr); + if(cr10_value&0x10000000) + break; + } + return (cr10_value&0x0ffff); +} + +static void phy_writeby_cr10(unsigned long iobase, u8 phy_addr, u8 offset, u16 phy_data) +{ + unsigned long ioaddr,cr10_value; + + ioaddr = iobase + DCR10; + cr10_value = phy_addr; + cr10_value = (cr10_value<<5) + offset; + cr10_value = (cr10_value<<16) + 0x04000000 + phy_data; + outl(cr10_value,ioaddr); + udelay(1); +} +/* + * Write one bit data to Phy Controller + */ + +static void phy_write_1bit(unsigned long ioaddr, u32 phy_data, u32 chip_id) +{ + outl(phy_data , ioaddr); /* MII Clock Low */ + udelay(1); + outl(phy_data | MDCLKH, ioaddr); /* MII Clock High */ + udelay(1); + outl(phy_data , ioaddr); /* MII Clock Low */ + udelay(1); +} + + +/* + * Read one bit phy data from PHY controller + */ + +static u16 phy_read_1bit(unsigned long ioaddr, u32 chip_id) +{ + u16 phy_data; + + outl(0x50000 , ioaddr); + udelay(1); + phy_data = ( inl(ioaddr) >> 19 ) & 0x1; + outl(0x40000 , ioaddr); + udelay(1); + + return phy_data; +} + + +static struct pci_device_id uli526x_pci_tbl[] = { + { 0x10B9, 0x5261, PCI_ANY_ID, PCI_ANY_ID, 0, 0, PCI_ULI5261_ID }, + { 0x10B9, 0x5263, PCI_ANY_ID, PCI_ANY_ID, 0, 0, PCI_ULI5263_ID }, + { 0, } +}; +MODULE_DEVICE_TABLE(pci, uli526x_pci_tbl); + + +static struct pci_driver uli526x_driver = { + .name = "uli526x", + .id_table = uli526x_pci_tbl, + .probe = uli526x_init_one, + .remove = __devexit_p(uli526x_remove_one), +}; + +MODULE_AUTHOR("Peer Chen, peer.chen@uli.com.tw"); +MODULE_DESCRIPTION("ULi M5261/M5263 fast ethernet driver"); +MODULE_LICENSE("GPL"); + +MODULE_PARM(debug, "i"); +MODULE_PARM(mode, "i"); +MODULE_PARM(cr6set, "i"); +MODULE_PARM_DESC(debug, "ULi M5261/M5263 enable debugging (0-1)"); +MODULE_PARM_DESC(mode, "ULi M5261/M5263: Bit 0: 10/100Mbps, bit 2: duplex, bit 8: HomePNA"); + +/* Description: + * when user used insmod to add module, system invoked init_module() + * to initilize and register. + */ + +static int __init uli526x_init_module(void) +{ + int rc; + + printk(version); + printed_version = 1; + + ULI526X_DBUG(0, "init_module() ", debug); + + if (debug) + uli526x_debug = debug; /* set debug flag */ + if (cr6set) + uli526x_cr6_user_set = cr6set; + + switch(mode) { + case ULI526X_10MHF: + case ULI526X_100MHF: + case ULI526X_10MFD: + case ULI526X_100MFD: + uli526x_media_mode = mode; + break; + default:uli526x_media_mode = ULI526X_AUTO; + break; + } + + rc = pci_module_init(&uli526x_driver); + if (rc < 0) + return rc; + + return 0; +} + + +/* + * Description: + * when user used rmmod to delete module, system invoked clean_module() + * to un-register all registered services. + */ + +static void __exit uli526x_cleanup_module(void) +{ + ULI526X_DBUG(0, "uli526x_clean_module() ", debug); + pci_unregister_driver(&uli526x_driver); +} + +module_init(uli526x_init_module); +module_exit(uli526x_cleanup_module); -- cgit v1.2.3 From 890e8d0a3ded0b1dee9020bbef7e9908e2228ffb Mon Sep 17 00:00:00 2001 From: Francois Romieu Date: Sat, 30 Jul 2005 13:08:43 +0200 Subject: [PATCH] sis190: resurrection Raise the sis190 driver from the dead The driver handles the integrated network device found on SiS 965L chipset. It follows the classical (non-napi) interrupt-driven model and provides minimal ethtool support. The code comes from a heavy cleanup/rewrite of the original code which was removed from the kernel on 14/04/2004. Since the r8169 driver does not work too bad and there will probably be (at least) a few months of improvements/testing/fixing, I made the code as close as possible to the r8169 one. Pascal Chapperon deserves some special credit for testing and bug-catching. Many thanks to Lars Vahlenberg as well. Signed-off-by: Francois Romieu Signed-off-by: Jeff Garzik --- drivers/net/Kconfig | 10 + drivers/net/Makefile | 1 + drivers/net/sis190.c | 1359 ++++++++++++++++++++++++++++++++++++++++++++++++++ 3 files changed, 1370 insertions(+) create mode 100644 drivers/net/sis190.c diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig index 8a835eb5880..765fbb29d38 100644 --- a/drivers/net/Kconfig +++ b/drivers/net/Kconfig @@ -1921,6 +1921,16 @@ config R8169_VLAN If in doubt, say Y. +config SIS190 + tristate "SiS190 gigabit ethernet support" + depends on PCI + select CRC32 + ---help--- + Say Y here if you have a SiS 190 PCI Gigabit Ethernet adapter. + + To compile this driver as a module, choose M here: the module + will be called sis190. This is recommended. + config SKGE tristate "New SysKonnect GigaEthernet support (EXPERIMENTAL)" depends on PCI && EXPERIMENTAL diff --git a/drivers/net/Makefile b/drivers/net/Makefile index 63c6d1e6d4d..67b280af425 100644 --- a/drivers/net/Makefile +++ b/drivers/net/Makefile @@ -42,6 +42,7 @@ obj-$(CONFIG_EEPRO100) += eepro100.o obj-$(CONFIG_E100) += e100.o obj-$(CONFIG_TLAN) += tlan.o obj-$(CONFIG_EPIC100) += epic100.o +obj-$(CONFIG_SIS190) += sis190.o obj-$(CONFIG_SIS900) += sis900.o obj-$(CONFIG_YELLOWFIN) += yellowfin.o obj-$(CONFIG_ACENIC) += acenic.o diff --git a/drivers/net/sis190.c b/drivers/net/sis190.c new file mode 100644 index 00000000000..fd303e7408a --- /dev/null +++ b/drivers/net/sis190.c @@ -0,0 +1,1359 @@ +/* + sis190.c: Silicon Integrated Systems SiS190 ethernet driver + + Copyright (c) 2003 K.M. Liu + Copyright (c) 2003, 2004 Jeff Garzik + Copyright (c) 2003, 2004, 2005 Francois Romieu + + Based on r8169.c, tg3.c, 8139cp.c, skge.c and probably even epic100.c. + + This software may be used and distributed according to the terms of + the GNU General Public License (GPL), incorporated herein by reference. + Drivers based on or derived from this code fall under the GPL and must + retain the authorship, copyright and license notice. This file is not + a complete program and may only be used when the entire operating + system is licensed under the GPL. + + See the file COPYING in this distribution for more information. + + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#define net_drv(p, arg...) if (netif_msg_drv(p)) \ + printk(arg) +#define net_probe(p, arg...) if (netif_msg_probe(p)) \ + printk(arg) +#define net_link(p, arg...) if (netif_msg_link(p)) \ + printk(arg) +#define net_intr(p, arg...) if (netif_msg_intr(p)) \ + printk(arg) +#define net_tx_err(p, arg...) if (netif_msg_tx_err(p)) \ + printk(arg) + +#ifdef CONFIG_SIS190_NAPI +#define NAPI_SUFFIX "-NAPI" +#else +#define NAPI_SUFFIX "" +#endif + +#define DRV_VERSION "1.2" NAPI_SUFFIX +#define DRV_NAME "sis190" +#define SIS190_DRIVER_NAME DRV_NAME " Gigabit Ethernet driver " DRV_VERSION +#define PFX DRV_NAME ": " + +#ifdef CONFIG_SIS190_NAPI +#define sis190_rx_skb netif_receive_skb +#define sis190_rx_quota(count, quota) min(count, quota) +#else +#define sis190_rx_skb netif_rx +#define sis190_rx_quota(count, quota) count +#endif + +#define MAC_ADDR_LEN 6 + +#define NUM_TX_DESC 64 +#define NUM_RX_DESC 64 +#define TX_RING_BYTES (NUM_TX_DESC * sizeof(struct TxDesc)) +#define RX_RING_BYTES (NUM_RX_DESC * sizeof(struct RxDesc)) +#define RX_BUF_SIZE 1536 + +#define SIS190_REGS_SIZE 0x80 +#define SIS190_TX_TIMEOUT (6*HZ) +#define SIS190_PHY_TIMEOUT (10*HZ) +#define SIS190_MSG_DEFAULT (NETIF_MSG_DRV | NETIF_MSG_PROBE | \ + NETIF_MSG_LINK | NETIF_MSG_IFUP | \ + NETIF_MSG_IFDOWN) + +/* Enhanced PHY access register bit definitions */ +#define EhnMIIread 0x0000 +#define EhnMIIwrite 0x0020 +#define EhnMIIdataShift 16 +#define EhnMIIpmdShift 6 /* 7016 only */ +#define EhnMIIregShift 11 +#define EhnMIIreq 0x0010 +#define EhnMIInotDone 0x0010 + +/* Write/read MMIO register */ +#define SIS_W8(reg, val) writeb ((val), ioaddr + (reg)) +#define SIS_W16(reg, val) writew ((val), ioaddr + (reg)) +#define SIS_W32(reg, val) writel ((val), ioaddr + (reg)) +#define SIS_R8(reg) readb (ioaddr + (reg)) +#define SIS_R16(reg) readw (ioaddr + (reg)) +#define SIS_R32(reg) readl (ioaddr + (reg)) + +#define SIS_PCI_COMMIT() SIS_R32(IntrControl) + +enum sis190_registers { + TxControl = 0x00, + TxDescStartAddr = 0x04, + TxNextDescAddr = 0x0c, // unused + RxControl = 0x10, + RxDescStartAddr = 0x14, + RxNextDescAddr = 0x1c, // unused + IntrStatus = 0x20, + IntrMask = 0x24, + IntrControl = 0x28, + IntrTimer = 0x2c, // unused + PMControl = 0x30, // unused + ROMControl = 0x38, + ROMInterface = 0x3c, + StationControl = 0x40, + GMIIControl = 0x44, + TxMacControl = 0x50, + RxMacControl = 0x60, + RxMacAddr = 0x62, + RxHashTable = 0x68, + // Undocumented = 0x6c, + RxWakeOnLan = 0x70, + // Undocumented = 0x74, + RxMPSControl = 0x78, // unused +}; + +enum sis190_register_content { + /* IntrStatus */ + SoftInt = 0x40000000, // unused + Timeup = 0x20000000, // unused + PauseFrame = 0x00080000, // unused + MagicPacket = 0x00040000, // unused + WakeupFrame = 0x00020000, // unused + LinkChange = 0x00010000, + RxQEmpty = 0x00000080, + RxQInt = 0x00000040, + TxQ1Empty = 0x00000020, // unused + TxQ1Int = 0x00000010, + TxQ0Empty = 0x00000008, // unused + TxQ0Int = 0x00000004, + RxHalt = 0x00000002, + TxHalt = 0x00000001, + + /* RxStatusDesc */ + RxRES = 0x00200000, // unused + RxCRC = 0x00080000, + RxRUNT = 0x00100000, // unused + RxRWT = 0x00400000, // unused + + /* {Rx/Tx}CmdBits */ + CmdReset = 0x10, + CmdRxEnb = 0x08, // unused + CmdTxEnb = 0x01, + RxBufEmpty = 0x01, // unused + + /* Cfg9346Bits */ + Cfg9346_Lock = 0x00, // unused + Cfg9346_Unlock = 0xc0, // unused + + /* RxMacControl */ + AcceptErr = 0x20, // unused + AcceptRunt = 0x10, // unused + AcceptBroadcast = 0x0800, + AcceptMulticast = 0x0400, + AcceptMyPhys = 0x0200, + AcceptAllPhys = 0x0100, + + /* RxConfigBits */ + RxCfgFIFOShift = 13, + RxCfgDMAShift = 8, // 0x1a in RxControl ? + + /* TxConfigBits */ + TxInterFrameGapShift = 24, + TxDMAShift = 8, /* DMA burst value (0-7) is shift this many bits */ + + /* StationControl */ + _1000bpsF = 0x1c00, + _1000bpsH = 0x0c00, + _100bpsF = 0x1800, + _100bpsH = 0x0800, + _10bpsF = 0x1400, + _10bpsH = 0x0400, + + LinkStatus = 0x02, // unused + FullDup = 0x01, // unused + + /* TBICSRBit */ + TBILinkOK = 0x02000000, // unused +}; + +struct TxDesc { + u32 PSize; + u32 status; + u32 addr; + u32 size; +}; + +struct RxDesc { + u32 PSize; + u32 status; + u32 addr; + u32 size; +}; + +enum _DescStatusBit { + /* _Desc.status */ + OWNbit = 0x80000000, + INTbit = 0x40000000, + DEFbit = 0x00200000, + CRCbit = 0x00020000, + PADbit = 0x00010000, + /* _Desc.size */ + RingEnd = (1 << 31), + /* _Desc.PSize */ + RxSizeMask = 0x0000ffff +}; + +struct sis190_private { + void __iomem *mmio_addr; + struct pci_dev *pci_dev; + struct net_device_stats stats; + spinlock_t lock; + u32 rx_buf_sz; + u32 cur_rx; + u32 cur_tx; + u32 dirty_rx; + u32 dirty_tx; + dma_addr_t rx_dma; + dma_addr_t tx_dma; + struct RxDesc *RxDescRing; + struct TxDesc *TxDescRing; + struct sk_buff *Rx_skbuff[NUM_RX_DESC]; + struct sk_buff *Tx_skbuff[NUM_TX_DESC]; + struct work_struct phy_task; + struct timer_list timer; + u32 msg_enable; +}; + +const static struct { + const char *name; + u8 version; /* depend on docs */ + u32 RxConfigMask; /* clear the bits supported by this chip */ +} sis_chip_info[] = { + { DRV_NAME, 0x00, 0xff7e1880, }, +}; + +static struct pci_device_id sis190_pci_tbl[] __devinitdata = { + { PCI_DEVICE(PCI_VENDOR_ID_SI, 0x0190), 0, 0, 0 }, + { 0, }, +}; + +MODULE_DEVICE_TABLE(pci, sis190_pci_tbl); + +static int rx_copybreak = 200; + +static struct { + u32 msg_enable; +} debug = { -1 }; + +MODULE_DESCRIPTION("SiS sis190 Gigabit Ethernet driver"); +module_param(rx_copybreak, int, 0); +MODULE_PARM_DESC(rx_copybreak, "Copy breakpoint for copy-only-tiny-frames"); +module_param_named(debug, debug.msg_enable, int, 0); +MODULE_PARM_DESC(debug, "Debug verbosity level (0=none, ..., 16=all)"); +MODULE_AUTHOR("K.M. Liu , Ueimor "); +MODULE_VERSION(DRV_VERSION); +MODULE_LICENSE("GPL"); + +static const u32 sis190_intr_mask = + RxQEmpty | RxQInt | TxQ1Int | TxQ0Int | RxHalt | TxHalt; + +/* + * Maximum number of multicast addresses to filter (vs. Rx-all-multicast). + * The chips use a 64 element hash table based on the Ethernet CRC. + */ +static int multicast_filter_limit = 32; + +static void __mdio_cmd(void __iomem *ioaddr, u32 ctl) +{ + unsigned int i; + + SIS_W32(GMIIControl, ctl); + + msleep(1); + + for (i = 0; i < 100; i++) { + if (!(SIS_R32(GMIIControl) & EhnMIInotDone)) + break; + msleep(1); + } + + if (i > 999) + printk(KERN_ERR PFX "PHY command failed !\n"); +} + +static void mdio_write(void __iomem *ioaddr, int reg, int val) +{ + u32 pmd = 1; + + __mdio_cmd(ioaddr, EhnMIIreq | EhnMIIwrite | + (((u32) reg) << EhnMIIregShift) | (pmd << EhnMIIpmdShift) | + (((u32) val) << EhnMIIdataShift)); +} + +static int mdio_read(void __iomem *ioaddr, int reg) +{ + u32 pmd = 1; + + __mdio_cmd(ioaddr, EhnMIIreq | EhnMIIread | + (((u32) reg) << EhnMIIregShift) | (pmd << EhnMIIpmdShift)); + + return (u16) (SIS_R32(GMIIControl) >> EhnMIIdataShift); +} + +static int sis190_read_eeprom(void __iomem *ioaddr, u32 reg) +{ + unsigned int i; + u16 data; + u32 val; + + if (!(SIS_R32(ROMControl) & 0x0002)) + return 0; + + val = (0x0080 | (0x2 << 8) | (reg << 10)); + + SIS_W32(ROMInterface, val); + + for (i = 0; i < 200; i++) { + if (!(SIS_R32(ROMInterface) & 0x0080)) + break; + msleep(1); + } + + data = (u16) ((SIS_R32(ROMInterface) & 0xffff0000) >> 16); + + return data; +} + +static void sis190_irq_mask_and_ack(void __iomem *ioaddr) +{ + SIS_W32(IntrMask, 0x00); + SIS_W32(IntrStatus, 0xffffffff); + SIS_PCI_COMMIT(); +} + +static void sis190_asic_down(void __iomem *ioaddr) +{ + /* Stop the chip's Tx and Rx DMA processes. */ + + SIS_W32(TxControl, 0x1a00); + SIS_W32(RxControl, 0x1a00); + + sis190_irq_mask_and_ack(ioaddr); +} + +static void sis190_mark_as_last_descriptor(struct RxDesc *desc) +{ + desc->size |= cpu_to_le32(RingEnd); +} + +static inline void sis190_give_to_asic(struct RxDesc *desc, u32 rx_buf_sz) +{ + u32 eor = le32_to_cpu(desc->size) & RingEnd; + + desc->PSize = 0x0; + desc->size = cpu_to_le32(rx_buf_sz | eor); + wmb(); + desc->status = cpu_to_le32(OWNbit | INTbit); +} + +static inline void sis190_map_to_asic(struct RxDesc *desc, dma_addr_t mapping, + u32 rx_buf_sz) +{ + desc->addr = cpu_to_le32(mapping); + sis190_give_to_asic(desc, rx_buf_sz); +} + +static inline void sis190_make_unusable_by_asic(struct RxDesc *desc) +{ + desc->PSize = 0x0; + desc->addr = 0xdeadbeef; + desc->size &= cpu_to_le32(RingEnd); + wmb(); + desc->status = 0x0; +} + +static int sis190_alloc_rx_skb(struct pci_dev *pdev, struct sk_buff **sk_buff, + struct RxDesc *desc, u32 rx_buf_sz) +{ + struct sk_buff *skb; + dma_addr_t mapping; + int ret = 0; + + skb = dev_alloc_skb(rx_buf_sz); + if (!skb) + goto err_out; + + *sk_buff = skb; + + mapping = pci_map_single(pdev, skb->data, rx_buf_sz, + PCI_DMA_FROMDEVICE); + + sis190_map_to_asic(desc, mapping, rx_buf_sz); +out: + return ret; + +err_out: + ret = -ENOMEM; + sis190_make_unusable_by_asic(desc); + goto out; +} + +static u32 sis190_rx_fill(struct sis190_private *tp, struct net_device *dev, + u32 start, u32 end) +{ + u32 cur; + + for (cur = start; cur < end; cur++) { + int ret, i = cur % NUM_RX_DESC; + + if (tp->Rx_skbuff[i]) + continue; + + ret = sis190_alloc_rx_skb(tp->pci_dev, tp->Rx_skbuff + i, + tp->RxDescRing + i, tp->rx_buf_sz); + if (ret < 0) + break; + } + return cur - start; +} + +static inline int sis190_try_rx_copy(struct sk_buff **sk_buff, int pkt_size, + struct RxDesc *desc, int rx_buf_sz) +{ + int ret = -1; + + if (pkt_size < rx_copybreak) { + struct sk_buff *skb; + + skb = dev_alloc_skb(pkt_size + NET_IP_ALIGN); + if (skb) { + skb_reserve(skb, NET_IP_ALIGN); + eth_copy_and_sum(skb, sk_buff[0]->data, pkt_size, 0); + *sk_buff = skb; + sis190_give_to_asic(desc, rx_buf_sz); + ret = 0; + } + } + return ret; +} + +static int sis190_rx_interrupt(struct net_device *dev, + struct sis190_private *tp, void __iomem *ioaddr) +{ + struct net_device_stats *stats = &tp->stats; + u32 rx_left, cur_rx = tp->cur_rx; + u32 delta, count; + + rx_left = NUM_RX_DESC + tp->dirty_rx - cur_rx; + rx_left = sis190_rx_quota(rx_left, (u32) dev->quota); + + for (; rx_left > 0; rx_left--, cur_rx++) { + unsigned int entry = cur_rx % NUM_RX_DESC; + struct RxDesc *desc = tp->RxDescRing + entry; + u32 status; + + if (desc->status & OWNbit) + break; + + status = le32_to_cpu(desc->PSize); + + // net_intr(tp, KERN_INFO "%s: Rx PSize = %08x.\n", dev->name, + // status); + + if (status & RxCRC) { + net_intr(tp, KERN_INFO "%s: bad crc. status = %08x.\n", + dev->name, status); + stats->rx_errors++; + stats->rx_crc_errors++; + sis190_give_to_asic(desc, tp->rx_buf_sz); + } else if (!(status & PADbit)) { + net_intr(tp, KERN_INFO "%s: bad pad. status = %08x.\n", + dev->name, status); + stats->rx_errors++; + stats->rx_length_errors++; + sis190_give_to_asic(desc, tp->rx_buf_sz); + } else { + struct sk_buff *skb = tp->Rx_skbuff[entry]; + int pkt_size = (status & RxSizeMask) - 4; + void (*pci_action)(struct pci_dev *, dma_addr_t, + size_t, int) = pci_dma_sync_single_for_device; + + if (unlikely(pkt_size > tp->rx_buf_sz)) { + net_intr(tp, KERN_INFO + "%s: (frag) status = %08x.\n", + dev->name, status); + stats->rx_dropped++; + stats->rx_length_errors++; + sis190_give_to_asic(desc, tp->rx_buf_sz); + continue; + } + + pci_dma_sync_single_for_cpu(tp->pci_dev, + le32_to_cpu(desc->addr), tp->rx_buf_sz, + PCI_DMA_FROMDEVICE); + + if (sis190_try_rx_copy(&skb, pkt_size, desc, + tp->rx_buf_sz)) { + pci_action = pci_unmap_single; + tp->Rx_skbuff[entry] = NULL; + sis190_make_unusable_by_asic(desc); + } + + pci_action(tp->pci_dev, le32_to_cpu(desc->addr), + tp->rx_buf_sz, PCI_DMA_FROMDEVICE); + + skb->dev = dev; + skb_put(skb, pkt_size); + skb->protocol = eth_type_trans(skb, dev); + + sis190_rx_skb(skb); + + dev->last_rx = jiffies; + stats->rx_bytes += pkt_size; + stats->rx_packets++; + } + } + count = cur_rx - tp->cur_rx; + tp->cur_rx = cur_rx; + + delta = sis190_rx_fill(tp, dev, tp->dirty_rx, tp->cur_rx); + if (!delta && count && netif_msg_intr(tp)) + printk(KERN_INFO "%s: no Rx buffer allocated.\n", dev->name); + tp->dirty_rx += delta; + + if (((tp->dirty_rx + NUM_RX_DESC) == tp->cur_rx) && netif_msg_intr(tp)) + printk(KERN_EMERG "%s: Rx buffers exhausted.\n", dev->name); + + return count; +} + +static void sis190_unmap_tx_skb(struct pci_dev *pdev, struct sk_buff *skb, + struct TxDesc *desc) +{ + unsigned int len; + + len = skb->len < ETH_ZLEN ? ETH_ZLEN : skb->len; + + pci_unmap_single(pdev, le32_to_cpu(desc->addr), len, PCI_DMA_TODEVICE); + + memset(desc, 0x00, sizeof(*desc)); +} + +static void sis190_tx_interrupt(struct net_device *dev, + struct sis190_private *tp, void __iomem *ioaddr) +{ + u32 pending, dirty_tx = tp->dirty_tx; + /* + * It would not be needed if queueing was allowed to be enabled + * again too early (hint: think preempt and unclocked smp systems). + */ + unsigned int queue_stopped; + + smp_rmb(); + pending = tp->cur_tx - dirty_tx; + queue_stopped = (pending == NUM_TX_DESC); + + for (; pending; pending--, dirty_tx++) { + unsigned int entry = dirty_tx % NUM_TX_DESC; + struct TxDesc *txd = tp->TxDescRing + entry; + struct sk_buff *skb; + + if (le32_to_cpu(txd->status) & OWNbit) + break; + + skb = tp->Tx_skbuff[entry]; + + tp->stats.tx_packets++; + tp->stats.tx_bytes += skb->len; + + sis190_unmap_tx_skb(tp->pci_dev, skb, txd); + tp->Tx_skbuff[entry] = NULL; + dev_kfree_skb_irq(skb); + } + + if (tp->dirty_tx != dirty_tx) { + tp->dirty_tx = dirty_tx; + smp_wmb(); + if (queue_stopped) + netif_wake_queue(dev); + } +} + +/* + * The interrupt handler does all of the Rx thread work and cleans up after + * the Tx thread. + */ +static irqreturn_t sis190_interrupt(int irq, void *__dev, struct pt_regs *regs) +{ + struct net_device *dev = __dev; + struct sis190_private *tp = netdev_priv(dev); + void __iomem *ioaddr = tp->mmio_addr; + unsigned int handled = 0; + u32 status; + + status = SIS_R32(IntrStatus); + + if ((status == 0xffffffff) || !status) + goto out; + + handled = 1; + + if (unlikely(!netif_running(dev))) { + sis190_asic_down(ioaddr); + goto out; + } + + SIS_W32(IntrStatus, status); + + // net_intr(tp, KERN_INFO "%s: status = %08x.\n", dev->name, status); + + if (status & LinkChange) { + net_intr(tp, KERN_INFO "%s: link change.\n", dev->name); + schedule_work(&tp->phy_task); + } + + if (status & RxQInt) + sis190_rx_interrupt(dev, tp, ioaddr); + + if (status & TxQ0Int) + sis190_tx_interrupt(dev, tp, ioaddr); +out: + return IRQ_RETVAL(handled); +} + +static void sis190_free_rx_skb(struct sis190_private *tp, + struct sk_buff **sk_buff, struct RxDesc *desc) +{ + struct pci_dev *pdev = tp->pci_dev; + + pci_unmap_single(pdev, le32_to_cpu(desc->addr), tp->rx_buf_sz, + PCI_DMA_FROMDEVICE); + dev_kfree_skb(*sk_buff); + *sk_buff = NULL; + sis190_make_unusable_by_asic(desc); +} + +static void sis190_rx_clear(struct sis190_private *tp) +{ + unsigned int i; + + for (i = 0; i < NUM_RX_DESC; i++) { + if (!tp->Rx_skbuff[i]) + continue; + sis190_free_rx_skb(tp, tp->Rx_skbuff + i, tp->RxDescRing + i); + } +} + +static void sis190_init_ring_indexes(struct sis190_private *tp) +{ + tp->dirty_tx = tp->dirty_rx = tp->cur_tx = tp->cur_rx = 0; +} + +static int sis190_init_ring(struct net_device *dev) +{ + struct sis190_private *tp = netdev_priv(dev); + + sis190_init_ring_indexes(tp); + + memset(tp->Tx_skbuff, 0x0, NUM_TX_DESC * sizeof(struct sk_buff *)); + memset(tp->Rx_skbuff, 0x0, NUM_RX_DESC * sizeof(struct sk_buff *)); + + if (sis190_rx_fill(tp, dev, 0, NUM_RX_DESC) != NUM_RX_DESC) + goto err_rx_clear; + + sis190_mark_as_last_descriptor(tp->RxDescRing + NUM_RX_DESC - 1); + + return 0; + +err_rx_clear: + sis190_rx_clear(tp); + return -ENOMEM; +} + +static void sis190_set_rx_mode(struct net_device *dev) +{ + struct sis190_private *tp = netdev_priv(dev); + void __iomem *ioaddr = tp->mmio_addr; + unsigned long flags; + u32 mc_filter[2]; /* Multicast hash filter */ + u16 rx_mode; + + if (dev->flags & IFF_PROMISC) { + /* Unconditionally log net taps. */ + net_drv(tp, KERN_NOTICE "%s: Promiscuous mode enabled.\n", + dev->name); + rx_mode = + AcceptBroadcast | AcceptMulticast | AcceptMyPhys | + AcceptAllPhys; + mc_filter[1] = mc_filter[0] = 0xffffffff; + } else if ((dev->mc_count > multicast_filter_limit) || + (dev->flags & IFF_ALLMULTI)) { + /* Too many to filter perfectly -- accept all multicasts. */ + rx_mode = AcceptBroadcast | AcceptMulticast | AcceptMyPhys; + mc_filter[1] = mc_filter[0] = 0xffffffff; + } else { + struct dev_mc_list *mclist; + unsigned int i; + + rx_mode = AcceptBroadcast | AcceptMyPhys; + mc_filter[1] = mc_filter[0] = 0; + for (i = 0, mclist = dev->mc_list; mclist && i < dev->mc_count; + i++, mclist = mclist->next) { + int bit_nr = + ether_crc(ETH_ALEN, mclist->dmi_addr) >> 26; + mc_filter[bit_nr >> 5] |= 1 << (bit_nr & 31); + rx_mode |= AcceptMulticast; + } + } + + spin_lock_irqsave(&tp->lock, flags); + + SIS_W16(RxMacControl, rx_mode | 0x2); + SIS_W32(RxHashTable, mc_filter[0]); + SIS_W32(RxHashTable + 4, mc_filter[1]); + + spin_unlock_irqrestore(&tp->lock, flags); +} + +static void sis190_soft_reset(void __iomem *ioaddr) +{ + SIS_W32(IntrControl, 0x8000); + SIS_PCI_COMMIT(); + msleep(1); + SIS_W32(IntrControl, 0x0); + sis190_asic_down(ioaddr); + msleep(1); +} + +static void sis190_hw_start(struct net_device *dev) +{ + struct sis190_private *tp = netdev_priv(dev); + void __iomem *ioaddr = tp->mmio_addr; + + sis190_soft_reset(ioaddr); + + SIS_W32(TxDescStartAddr, tp->tx_dma); + SIS_W32(RxDescStartAddr, tp->rx_dma); + + SIS_W32(IntrStatus, 0xffffffff); + SIS_W32(IntrMask, 0x0); + /* + * Default is 100Mbps. + * A bit strange: 100Mbps is 0x1801 elsewhere -- FR 2005/06/09 + */ + SIS_W16(StationControl, 0x1901); + SIS_W32(GMIIControl, 0x0); + SIS_W32(TxMacControl, 0x60); + SIS_W16(RxMacControl, 0x02); + SIS_W32(RxHashTable, 0x0); + SIS_W32(0x6c, 0x0); + SIS_W32(RxWakeOnLan, 0x0); + SIS_W32(0x74, 0x0); + + SIS_PCI_COMMIT(); + + sis190_set_rx_mode(dev); + + /* Enable all known interrupts by setting the interrupt mask. */ + SIS_W32(IntrMask, sis190_intr_mask); + + SIS_W32(TxControl, 0x1a00 | CmdTxEnb); + SIS_W32(RxControl, 0x1a1d); + + netif_start_queue(dev); +} + +static void sis190_phy_task(void * data) +{ + struct net_device *dev = data; + struct sis190_private *tp = netdev_priv(dev); + void __iomem *ioaddr = tp->mmio_addr; + u16 val; + + val = mdio_read(ioaddr, MII_BMCR); + if (val & BMCR_RESET) { + // FIXME: needlessly high ? -- FR 02/07/2005 + mod_timer(&tp->timer, jiffies + HZ/10); + } else if (!(mdio_read(ioaddr, MII_BMSR) & BMSR_ANEGCOMPLETE)) { + net_link(tp, KERN_WARNING "%s: PHY reset until link up.\n", + dev->name); + mdio_write(ioaddr, MII_BMCR, val | BMCR_RESET); + mod_timer(&tp->timer, jiffies + SIS190_PHY_TIMEOUT); + } else { + /* Rejoice ! */ + struct { + int val; + const char *msg; + u16 ctl; + } reg31[] = { + { LPA_1000XFULL | LPA_SLCT, + "1000 Mbps Full Duplex", + 0x01 | _1000bpsF }, + { LPA_1000XHALF | LPA_SLCT, + "1000 Mbps Half Duplex", + 0x01 | _1000bpsH }, + { LPA_100FULL, + "100 Mbps Full Duplex", + 0x01 | _100bpsF }, + { LPA_100HALF, + "100 Mbps Half Duplex", + 0x01 | _100bpsH }, + { LPA_10FULL, + "10 Mbps Full Duplex", + 0x01 | _10bpsF }, + { LPA_10HALF, + "10 Mbps Half Duplex", + 0x01 | _10bpsH }, + { 0, "unknown", 0x0000 } + }, *p; + + val = mdio_read(ioaddr, 0x1f); + net_link(tp, KERN_INFO "%s: mii ext = %04x.\n", dev->name, val); + + val = mdio_read(ioaddr, MII_LPA); + net_link(tp, KERN_INFO "%s: mii lpa = %04x.\n", dev->name, val); + + for (p = reg31; p->ctl; p++) { + if ((val & p->val) == p->val) + break; + } + if (p->ctl) + SIS_W16(StationControl, p->ctl); + net_link(tp, KERN_INFO "%s: link on %s mode.\n", dev->name, + p->msg); + netif_carrier_on(dev); + } +} + +static void sis190_phy_timer(unsigned long __opaque) +{ + struct net_device *dev = (struct net_device *)__opaque; + struct sis190_private *tp = netdev_priv(dev); + + if (likely(netif_running(dev))) + schedule_work(&tp->phy_task); +} + +static inline void sis190_delete_timer(struct net_device *dev) +{ + struct sis190_private *tp = netdev_priv(dev); + + del_timer_sync(&tp->timer); +} + +static inline void sis190_request_timer(struct net_device *dev) +{ + struct sis190_private *tp = netdev_priv(dev); + struct timer_list *timer = &tp->timer; + + init_timer(timer); + timer->expires = jiffies + SIS190_PHY_TIMEOUT; + timer->data = (unsigned long)dev; + timer->function = sis190_phy_timer; + add_timer(timer); +} + +static void sis190_set_rxbufsize(struct sis190_private *tp, + struct net_device *dev) +{ + unsigned int mtu = dev->mtu; + + tp->rx_buf_sz = (mtu > RX_BUF_SIZE) ? mtu + ETH_HLEN + 8 : RX_BUF_SIZE; +} + +static int sis190_open(struct net_device *dev) +{ + struct sis190_private *tp = netdev_priv(dev); + struct pci_dev *pdev = tp->pci_dev; + int rc = -ENOMEM; + + sis190_set_rxbufsize(tp, dev); + + /* + * Rx and Tx descriptors need 256 bytes alignment. + * pci_alloc_consistent() guarantees a stronger alignment. + */ + tp->TxDescRing = pci_alloc_consistent(pdev, TX_RING_BYTES, &tp->tx_dma); + if (!tp->TxDescRing) + goto out; + + tp->RxDescRing = pci_alloc_consistent(pdev, RX_RING_BYTES, &tp->rx_dma); + if (!tp->RxDescRing) + goto err_free_tx_0; + + rc = sis190_init_ring(dev); + if (rc < 0) + goto err_free_rx_1; + + INIT_WORK(&tp->phy_task, sis190_phy_task, dev); + + sis190_request_timer(dev); + + rc = request_irq(dev->irq, sis190_interrupt, SA_SHIRQ, dev->name, dev); + if (rc < 0) + goto err_release_timer_2; + + sis190_hw_start(dev); +out: + return rc; + +err_release_timer_2: + sis190_delete_timer(dev); + sis190_rx_clear(tp); +err_free_rx_1: + pci_free_consistent(tp->pci_dev, RX_RING_BYTES, tp->RxDescRing, + tp->rx_dma); +err_free_tx_0: + pci_free_consistent(tp->pci_dev, TX_RING_BYTES, tp->TxDescRing, + tp->tx_dma); + goto out; +} + +static void sis190_tx_clear(struct sis190_private *tp) +{ + unsigned int i; + + for (i = 0; i < NUM_TX_DESC; i++) { + struct sk_buff *skb = tp->Tx_skbuff[i]; + + if (!skb) + continue; + + sis190_unmap_tx_skb(tp->pci_dev, skb, tp->TxDescRing + i); + tp->Tx_skbuff[i] = NULL; + dev_kfree_skb(skb); + + tp->stats.tx_dropped++; + } + tp->cur_tx = tp->dirty_tx = 0; +} + +static void sis190_down(struct net_device *dev) +{ + struct sis190_private *tp = netdev_priv(dev); + void __iomem *ioaddr = tp->mmio_addr; + unsigned int poll_locked = 0; + + sis190_delete_timer(dev); + + netif_stop_queue(dev); + + flush_scheduled_work(); + + do { + spin_lock_irq(&tp->lock); + + sis190_asic_down(ioaddr); + + spin_unlock_irq(&tp->lock); + + synchronize_irq(dev->irq); + + if (!poll_locked) { + netif_poll_disable(dev); + poll_locked++; + } + + synchronize_sched(); + + } while (SIS_R32(IntrMask)); + + sis190_tx_clear(tp); + sis190_rx_clear(tp); +} + +static int sis190_close(struct net_device *dev) +{ + struct sis190_private *tp = netdev_priv(dev); + struct pci_dev *pdev = tp->pci_dev; + + sis190_down(dev); + + free_irq(dev->irq, dev); + + netif_poll_enable(dev); + + pci_free_consistent(pdev, TX_RING_BYTES, tp->TxDescRing, tp->tx_dma); + pci_free_consistent(pdev, RX_RING_BYTES, tp->RxDescRing, tp->rx_dma); + + tp->TxDescRing = NULL; + tp->RxDescRing = NULL; + + return 0; +} + +static int sis190_start_xmit(struct sk_buff *skb, struct net_device *dev) +{ + struct sis190_private *tp = netdev_priv(dev); + void __iomem *ioaddr = tp->mmio_addr; + u32 len, entry, dirty_tx; + struct TxDesc *desc; + dma_addr_t mapping; + + if (unlikely(skb->len < ETH_ZLEN)) { + skb = skb_padto(skb, ETH_ZLEN); + if (!skb) { + tp->stats.tx_dropped++; + goto out; + } + len = ETH_ZLEN; + } else { + len = skb->len; + } + + entry = tp->cur_tx % NUM_TX_DESC; + desc = tp->TxDescRing + entry; + + if (unlikely(le32_to_cpu(desc->status) & OWNbit)) { + netif_stop_queue(dev); + net_tx_err(tp, KERN_ERR PFX + "%s: BUG! Tx Ring full when queue awake!\n", + dev->name); + return NETDEV_TX_BUSY; + } + + mapping = pci_map_single(tp->pci_dev, skb->data, len, PCI_DMA_TODEVICE); + + tp->Tx_skbuff[entry] = skb; + + desc->PSize = cpu_to_le32(len); + desc->addr = cpu_to_le32(mapping); + + desc->size = cpu_to_le32(len); + if (entry == (NUM_TX_DESC - 1)) + desc->size |= cpu_to_le32(RingEnd); + + wmb(); + + desc->status = cpu_to_le32(OWNbit | INTbit | DEFbit | CRCbit | PADbit); + + tp->cur_tx++; + + smp_wmb(); + + SIS_W32(TxControl, 0x1a00 | CmdReset | CmdTxEnb); + + dev->trans_start = jiffies; + + dirty_tx = tp->dirty_tx; + if ((tp->cur_tx - NUM_TX_DESC) == dirty_tx) { + netif_stop_queue(dev); + smp_rmb(); + if (dirty_tx != tp->dirty_tx) + netif_wake_queue(dev); + } +out: + return NETDEV_TX_OK; +} + +static struct net_device_stats *sis190_get_stats(struct net_device *dev) +{ + struct sis190_private *tp = netdev_priv(dev); + + return &tp->stats; +} + +static void sis190_release_board(struct pci_dev *pdev) +{ + struct net_device *dev = pci_get_drvdata(pdev); + struct sis190_private *tp = netdev_priv(dev); + + iounmap(tp->mmio_addr); + pci_release_regions(pdev); + pci_disable_device(pdev); + free_netdev(dev); +} + +static struct net_device * __devinit sis190_init_board(struct pci_dev *pdev) +{ + struct sis190_private *tp; + struct net_device *dev; + void __iomem *ioaddr; + int rc; + + dev = alloc_etherdev(sizeof(*tp)); + if (!dev) { + net_drv(&debug, KERN_ERR PFX "unable to alloc new ethernet\n"); + rc = -ENOMEM; + goto err_out_0; + } + + SET_MODULE_OWNER(dev); + SET_NETDEV_DEV(dev, &pdev->dev); + + tp = netdev_priv(dev); + tp->msg_enable = netif_msg_init(debug.msg_enable, SIS190_MSG_DEFAULT); + + rc = pci_enable_device(pdev); + if (rc < 0) { + net_probe(tp, KERN_ERR "%s: enable failure\n", pci_name(pdev)); + goto err_free_dev_1; + } + + rc = -ENODEV; + + if (!(pci_resource_flags(pdev, 0) & IORESOURCE_MEM)) { + net_probe(tp, KERN_ERR "%s: region #0 is no MMIO resource.\n", + pci_name(pdev)); + goto err_pci_disable_2; + } + if (pci_resource_len(pdev, 0) < SIS190_REGS_SIZE) { + net_probe(tp, KERN_ERR "%s: invalid PCI region size(s).\n", + pci_name(pdev)); + goto err_pci_disable_2; + } + + rc = pci_request_regions(pdev, DRV_NAME); + if (rc < 0) { + net_probe(tp, KERN_ERR PFX "%s: could not request regions.\n", + pci_name(pdev)); + goto err_pci_disable_2; + } + + rc = pci_set_dma_mask(pdev, DMA_32BIT_MASK); + if (rc < 0) { + net_probe(tp, KERN_ERR "%s: DMA configuration failed.\n", + pci_name(pdev)); + goto err_free_res_3; + } + + pci_set_master(pdev); + + ioaddr = ioremap(pci_resource_start(pdev, 0), SIS190_REGS_SIZE); + if (!ioaddr) { + net_probe(tp, KERN_ERR "%s: cannot remap MMIO, aborting\n", + pci_name(pdev)); + rc = -EIO; + goto err_free_res_3; + } + + tp->pci_dev = pdev; + tp->mmio_addr = ioaddr; + + sis190_irq_mask_and_ack(ioaddr); + + sis190_soft_reset(ioaddr); +out: + return dev; + +err_free_res_3: + pci_release_regions(pdev); +err_pci_disable_2: + pci_disable_device(pdev); +err_free_dev_1: + free_netdev(dev); +err_out_0: + dev = ERR_PTR(rc); + goto out; +} + +static void sis190_tx_timeout(struct net_device *dev) +{ + struct sis190_private *tp = netdev_priv(dev); + void __iomem *ioaddr = tp->mmio_addr; + u8 tmp8; + + /* Disable Tx, if not already */ + tmp8 = SIS_R8(TxControl); + if (tmp8 & CmdTxEnb) + SIS_W8(TxControl, tmp8 & ~CmdTxEnb); + + /* Disable interrupts by clearing the interrupt mask. */ + SIS_W32(IntrMask, 0x0000); + + /* Stop a shared interrupt from scavenging while we are. */ + spin_lock_irq(&tp->lock); + sis190_tx_clear(tp); + spin_unlock_irq(&tp->lock); + + /* ...and finally, reset everything. */ + sis190_hw_start(dev); + + netif_wake_queue(dev); +} + +static void sis190_set_speed_auto(struct net_device *dev) +{ + struct sis190_private *tp = netdev_priv(dev); + void __iomem *ioaddr = tp->mmio_addr; + int val; + + net_link(tp, KERN_INFO "%s: Enabling Auto-negotiation.\n", dev->name); + + val = mdio_read(ioaddr, MII_ADVERTISE); + + // Enable 10/100 Full/Half Mode, leave MII_ADVERTISE bit4:0 + // unchanged. + mdio_write(ioaddr, MII_ADVERTISE, (val & ADVERTISE_SLCT) | + ADVERTISE_100FULL | ADVERTISE_10FULL | + ADVERTISE_100HALF | ADVERTISE_10HALF); + + // Enable 1000 Full Mode. + mdio_write(ioaddr, MII_CTRL1000, ADVERTISE_1000FULL); + + // Enable auto-negotiation and restart auto-negotiation. + mdio_write(ioaddr, MII_BMCR, + BMCR_ANENABLE | BMCR_ANRESTART | BMCR_RESET); +} + +static void sis190_get_drvinfo(struct net_device *dev, + struct ethtool_drvinfo *info) +{ + struct sis190_private *tp = netdev_priv(dev); + + strcpy(info->driver, DRV_NAME); + strcpy(info->version, DRV_VERSION); + strcpy(info->bus_info, pci_name(tp->pci_dev)); +} + +static int sis190_get_regs_len(struct net_device *dev) +{ + return SIS190_REGS_SIZE; +} + +static void sis190_get_regs(struct net_device *dev, struct ethtool_regs *regs, + void *p) +{ + struct sis190_private *tp = netdev_priv(dev); + unsigned long flags; + + if (regs->len > SIS190_REGS_SIZE) + regs->len = SIS190_REGS_SIZE; + + spin_lock_irqsave(&tp->lock, flags); + memcpy_fromio(p, tp->mmio_addr, regs->len); + spin_unlock_irqrestore(&tp->lock, flags); +} + +static u32 sis190_get_msglevel(struct net_device *dev) +{ + struct sis190_private *tp = netdev_priv(dev); + + return tp->msg_enable; +} + +static void sis190_set_msglevel(struct net_device *dev, u32 value) +{ + struct sis190_private *tp = netdev_priv(dev); + + tp->msg_enable = value; +} + +static struct ethtool_ops sis190_ethtool_ops = { + .get_drvinfo = sis190_get_drvinfo, + .get_regs_len = sis190_get_regs_len, + .get_regs = sis190_get_regs, + .get_link = ethtool_op_get_link, + .get_msglevel = sis190_get_msglevel, + .set_msglevel = sis190_set_msglevel, +}; + +static int __devinit sis190_init_one(struct pci_dev *pdev, + const struct pci_device_id *ent) +{ + static int printed_version = 0; + struct sis190_private *tp; + struct net_device *dev; + void __iomem *ioaddr; + int i, rc; + + if (!printed_version) { + net_drv(&debug, KERN_INFO SIS190_DRIVER_NAME " loaded.\n"); + printed_version = 1; + } + + dev = sis190_init_board(pdev); + if (IS_ERR(dev)) { + rc = PTR_ERR(dev); + goto out; + } + + tp = netdev_priv(dev); + ioaddr = tp->mmio_addr; + + /* Get MAC address */ + /* Read node address from the EEPROM */ + + if (SIS_R32(ROMControl) & 0x4) { + for (i = 0; i < 3; i++) { + SIS_W16(RxMacAddr + 2*i, + sis190_read_eeprom(ioaddr, 3 + i)); + } + } + + for (i = 0; i < MAC_ADDR_LEN; i++) + dev->dev_addr[i] = SIS_R8(RxMacAddr + i); + + INIT_WORK(&tp->phy_task, sis190_phy_task, dev); + + dev->open = sis190_open; + dev->stop = sis190_close; + dev->get_stats = sis190_get_stats; + dev->tx_timeout = sis190_tx_timeout; + dev->watchdog_timeo = SIS190_TX_TIMEOUT; + dev->hard_start_xmit = sis190_start_xmit; + dev->set_multicast_list = sis190_set_rx_mode; + SET_ETHTOOL_OPS(dev, &sis190_ethtool_ops); + dev->irq = pdev->irq; + dev->base_addr = (unsigned long) 0xdead; + + spin_lock_init(&tp->lock); + rc = register_netdev(dev); + if (rc < 0) { + sis190_release_board(pdev); + goto out; + } + + pci_set_drvdata(pdev, dev); + + net_probe(tp, KERN_INFO "%s: %s at %p (IRQ: %d), " + "%2.2x:%2.2x:%2.2x:%2.2x:%2.2x:%2.2x\n", + pci_name(pdev), sis_chip_info[ent->driver_data].name, + ioaddr, dev->irq, + dev->dev_addr[0], dev->dev_addr[1], + dev->dev_addr[2], dev->dev_addr[3], + dev->dev_addr[4], dev->dev_addr[5]); + + netif_carrier_off(dev); + + sis190_set_speed_auto(dev); +out: + return rc; +} + +static void __devexit sis190_remove_one(struct pci_dev *pdev) +{ + struct net_device *dev = pci_get_drvdata(pdev); + + unregister_netdev(dev); + sis190_release_board(pdev); + pci_set_drvdata(pdev, NULL); +} + +static struct pci_driver sis190_pci_driver = { + .name = DRV_NAME, + .id_table = sis190_pci_tbl, + .probe = sis190_init_one, + .remove = __devexit_p(sis190_remove_one), +}; + +static int __init sis190_init_module(void) +{ + return pci_module_init(&sis190_pci_driver); +} + +static void __exit sis190_cleanup_module(void) +{ + pci_unregister_driver(&sis190_pci_driver); +} + +module_init(sis190_init_module); +module_exit(sis190_cleanup_module); -- cgit v1.2.3 From 4405d3b5ef0a870e8d70ee4a3d050c89fcc40a86 Mon Sep 17 00:00:00 2001 From: Francois Romieu Date: Sat, 30 Jul 2005 13:09:20 +0200 Subject: [PATCH] sis190: netconsole support. netconsole support. This stuff should be factored out of every driver. Signed-off-by: Francois Romieu Signed-off-by: Jeff Garzik --- drivers/net/sis190.c | 15 +++++++++++++++ 1 file changed, 15 insertions(+) diff --git a/drivers/net/sis190.c b/drivers/net/sis190.c index fd303e7408a..e374cf43fed 100644 --- a/drivers/net/sis190.c +++ b/drivers/net/sis190.c @@ -629,6 +629,18 @@ out: return IRQ_RETVAL(handled); } +#ifdef CONFIG_NET_POLL_CONTROLLER +static void sis190_netpoll(struct net_device *dev) +{ + struct sis190_private *tp = netdev_priv(dev); + struct pci_dev *pdev = tp->pci_dev; + + disable_irq(pdev->irq); + sis190_interrupt(pdev->irq, dev, NULL); + enable_irq(pdev->irq); +} +#endif + static void sis190_free_rx_skb(struct sis190_private *tp, struct sk_buff **sk_buff, struct RxDesc *desc) { @@ -1300,6 +1312,9 @@ static int __devinit sis190_init_one(struct pci_dev *pdev, dev->tx_timeout = sis190_tx_timeout; dev->watchdog_timeo = SIS190_TX_TIMEOUT; dev->hard_start_xmit = sis190_start_xmit; +#ifdef CONFIG_NET_POLL_CONTROLLER + dev->poll_controller = sis190_netpoll; +#endif dev->set_multicast_list = sis190_set_rx_mode; SET_ETHTOOL_OPS(dev, &sis190_ethtool_ops); dev->irq = pdev->irq; -- cgit v1.2.3 From 43afb949a955a7d88f4baf43d5c676bf4c31ff6c Mon Sep 17 00:00:00 2001 From: Francois Romieu Date: Sat, 30 Jul 2005 13:10:21 +0200 Subject: [PATCH] sis190: ethtool/mii support. ethtool/mii support Bug: disabling autonegotiation and setting the link parameters at the same time does not provide the expected result. More investigation is needed. Note: past the initial probe/open time, the link is managed from user-space or accessed through sis190_phy_task, i.e. in a usermode context. Whence the very limited locking needs. Signed-off-by: Francois Romieu Signed-off-by: Jeff Garzik --- drivers/net/sis190.c | 60 ++++++++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 60 insertions(+) diff --git a/drivers/net/sis190.c b/drivers/net/sis190.c index e374cf43fed..ff4f24e5f59 100644 --- a/drivers/net/sis190.c +++ b/drivers/net/sis190.c @@ -21,6 +21,7 @@ #include #include #include +#include #include #include #include @@ -230,6 +231,7 @@ struct sis190_private { struct work_struct phy_task; struct timer_list timer; u32 msg_enable; + struct mii_if_info mii_if; }; const static struct { @@ -308,6 +310,20 @@ static int mdio_read(void __iomem *ioaddr, int reg) return (u16) (SIS_R32(GMIIControl) >> EhnMIIdataShift); } +static void __mdio_write(struct net_device *dev, int phy_id, int reg, int val) +{ + struct sis190_private *tp = netdev_priv(dev); + + mdio_write(tp->mmio_addr, reg, val); +} + +static int __mdio_read(struct net_device *dev, int phy_id, int reg) +{ + struct sis190_private *tp = netdev_priv(dev); + + return mdio_read(tp->mmio_addr, reg); +} + static int sis190_read_eeprom(void __iomem *ioaddr, u32 reg) { unsigned int i; @@ -790,6 +806,8 @@ static void sis190_phy_task(void * data) void __iomem *ioaddr = tp->mmio_addr; u16 val; + rtnl_lock(); + val = mdio_read(ioaddr, MII_BMCR); if (val & BMCR_RESET) { // FIXME: needlessly high ? -- FR 02/07/2005 @@ -843,6 +861,8 @@ static void sis190_phy_task(void * data) p->msg); netif_carrier_on(dev); } + + rtnl_unlock(); } static void sis190_phy_timer(unsigned long __opaque) @@ -1150,6 +1170,13 @@ static struct net_device * __devinit sis190_init_board(struct pci_dev *pdev) tp->pci_dev = pdev; tp->mmio_addr = ioaddr; + tp->mii_if.dev = dev; + tp->mii_if.mdio_read = __mdio_read; + tp->mii_if.mdio_write = __mdio_write; + // tp->mii_if.phy_id = XXX; + tp->mii_if.phy_id_mask = 0x1f; + tp->mii_if.reg_num_mask = 0x1f; + sis190_irq_mask_and_ack(ioaddr); sis190_soft_reset(ioaddr); @@ -1216,6 +1243,20 @@ static void sis190_set_speed_auto(struct net_device *dev) BMCR_ANENABLE | BMCR_ANRESTART | BMCR_RESET); } +static int sis190_get_settings(struct net_device *dev, struct ethtool_cmd *cmd) +{ + struct sis190_private *tp = netdev_priv(dev); + + return mii_ethtool_gset(&tp->mii_if, cmd); +} + +static int sis190_set_settings(struct net_device *dev, struct ethtool_cmd *cmd) +{ + struct sis190_private *tp = netdev_priv(dev); + + return mii_ethtool_sset(&tp->mii_if, cmd); +} + static void sis190_get_drvinfo(struct net_device *dev, struct ethtool_drvinfo *info) { @@ -1245,6 +1286,13 @@ static void sis190_get_regs(struct net_device *dev, struct ethtool_regs *regs, spin_unlock_irqrestore(&tp->lock, flags); } +static int sis190_nway_reset(struct net_device *dev) +{ + struct sis190_private *tp = netdev_priv(dev); + + return mii_nway_restart(&tp->mii_if); +} + static u32 sis190_get_msglevel(struct net_device *dev) { struct sis190_private *tp = netdev_priv(dev); @@ -1260,14 +1308,25 @@ static void sis190_set_msglevel(struct net_device *dev, u32 value) } static struct ethtool_ops sis190_ethtool_ops = { + .get_settings = sis190_get_settings, + .set_settings = sis190_set_settings, .get_drvinfo = sis190_get_drvinfo, .get_regs_len = sis190_get_regs_len, .get_regs = sis190_get_regs, .get_link = ethtool_op_get_link, .get_msglevel = sis190_get_msglevel, .set_msglevel = sis190_set_msglevel, + .nway_reset = sis190_nway_reset, }; +static int sis190_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd) +{ + struct sis190_private *tp = netdev_priv(dev); + + return !netif_running(dev) ? -EINVAL : + generic_mii_ioctl(&tp->mii_if, if_mii(ifr), cmd, NULL); +} + static int __devinit sis190_init_one(struct pci_dev *pdev, const struct pci_device_id *ent) { @@ -1308,6 +1367,7 @@ static int __devinit sis190_init_one(struct pci_dev *pdev, dev->open = sis190_open; dev->stop = sis190_close; + dev->do_ioctl = sis190_ioctl; dev->get_stats = sis190_get_stats; dev->tx_timeout = sis190_tx_timeout; dev->watchdog_timeo = SIS190_TX_TIMEOUT; -- cgit v1.2.3 From 92aab3c08eca4770228715d26c8234cca4fae9af Mon Sep 17 00:00:00 2001 From: Francois Romieu Date: Sat, 30 Jul 2005 13:11:18 +0200 Subject: [PATCH] sis190: add MAINTAINER entry. add MAINTAINER entry Signed-off-by: Francois Romieu Signed-off-by: Jeff Garzik --- MAINTAINERS | 6 ++++++ 1 file changed, 6 insertions(+) diff --git a/MAINTAINERS b/MAINTAINERS index ec8433c39de..b39faa31d76 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -2080,6 +2080,12 @@ M: support@simtec.co.uk W: http://www.simtec.co.uk/products/EB2410ITX/ S: Supported +SIS 190 ETHERNET DRIVER +P: Francois Romieu +M: romieu@fr.zoreil.com +L: netdev@vger.kernel.org +S: Maintained + SIS 5513 IDE CONTROLLER DRIVER P: Lionel Bouton M: Lionel.Bouton@inet6.fr -- cgit v1.2.3 From 188f23ba94a618b12cc205306f02b4f5036c4fa7 Mon Sep 17 00:00:00 2001 From: Francois Romieu Date: Sat, 30 Jul 2005 13:11:43 +0200 Subject: [PATCH] sis190: merge some register related information from SiS driver. Merge some register related information from SiS driver. Signed-off-by: Francois Romieu Signed-off-by: Jeff Garzik --- drivers/net/sis190.c | 31 ++++++++++++++++++++++--------- 1 file changed, 22 insertions(+), 9 deletions(-) diff --git a/drivers/net/sis190.c b/drivers/net/sis190.c index ff4f24e5f59..e67a5753882 100644 --- a/drivers/net/sis190.c +++ b/drivers/net/sis190.c @@ -98,27 +98,36 @@ enum sis190_registers { TxControl = 0x00, TxDescStartAddr = 0x04, - TxNextDescAddr = 0x0c, // unused + rsv0 = 0x08, // reserved + TxSts = 0x0c, // unused (Control/Status) RxControl = 0x10, RxDescStartAddr = 0x14, - RxNextDescAddr = 0x1c, // unused + rsv1 = 0x18, // reserved + RxSts = 0x1c, // unused IntrStatus = 0x20, IntrMask = 0x24, IntrControl = 0x28, - IntrTimer = 0x2c, // unused - PMControl = 0x30, // unused + IntrTimer = 0x2c, // unused (Interupt Timer) + PMControl = 0x30, // unused (Power Mgmt Control/Status) + rsv2 = 0x34, // reserved ROMControl = 0x38, ROMInterface = 0x3c, StationControl = 0x40, GMIIControl = 0x44, + GIoCR = 0x48, // unused (GMAC IO Compensation) + GIoCtrl = 0x4c, // unused (GMAC IO Control) TxMacControl = 0x50, + TxLimit = 0x54, // unused (Tx MAC Timer/TryLimit) + RGDelay = 0x58, // unused (RGMII Tx Internal Delay) + rsv3 = 0x5c, // reserved RxMacControl = 0x60, RxMacAddr = 0x62, RxHashTable = 0x68, // Undocumented = 0x6c, - RxWakeOnLan = 0x70, - // Undocumented = 0x74, - RxMPSControl = 0x78, // unused + RxWolCtrl = 0x70, + RxWolData = 0x74, // unused (Rx WOL Data Access) + RxMPSControl = 0x78, // unused (Rx MPS Control) + rsv4 = 0x7c, // reserved }; enum sis190_register_content { @@ -783,8 +792,8 @@ static void sis190_hw_start(struct net_device *dev) SIS_W16(RxMacControl, 0x02); SIS_W32(RxHashTable, 0x0); SIS_W32(0x6c, 0x0); - SIS_W32(RxWakeOnLan, 0x0); - SIS_W32(0x74, 0x0); + SIS_W32(RxWolCtrl, 0x0); + SIS_W32(RxWolData, 0x0); SIS_PCI_COMMIT(); @@ -1205,6 +1214,10 @@ static void sis190_tx_timeout(struct net_device *dev) if (tmp8 & CmdTxEnb) SIS_W8(TxControl, tmp8 & ~CmdTxEnb); + + net_tx_err(tp, KERN_INFO "%s: Transmit timeout, status %08x %08x.\n", + dev->name, SIS_R32(TxControl), SIS_R32(TxSts)); + /* Disable interrupts by clearing the interrupt mask. */ SIS_W32(IntrMask, 0x0000); -- cgit v1.2.3 From 40292fb0f041362bca2f6ad975acedce4f6e3f3e Mon Sep 17 00:00:00 2001 From: Francois Romieu Date: Sat, 30 Jul 2005 13:12:06 +0200 Subject: [PATCH] sis190: remove hardcoded constants. Replace hardcoded constants by enumerated values in sis190_read_eeprom The names of the enumerated values have been extracted from SiS'official driver (v1.00.00 published on 2005/07/11). Signed-off-by: Francois Romieu Signed-off-by: Jeff Garzik --- drivers/net/sis190.c | 28 ++++++++++++++++++---------- 1 file changed, 18 insertions(+), 10 deletions(-) diff --git a/drivers/net/sis190.c b/drivers/net/sis190.c index e67a5753882..d915507e90e 100644 --- a/drivers/net/sis190.c +++ b/drivers/net/sis190.c @@ -5,7 +5,8 @@ Copyright (c) 2003, 2004 Jeff Garzik Copyright (c) 2003, 2004, 2005 Francois Romieu - Based on r8169.c, tg3.c, 8139cp.c, skge.c and probably even epic100.c. + Based on r8169.c, tg3.c, 8139cp.c, skge.c, epic100.c and SiS 190/191 + genuine driver. This software may be used and distributed according to the terms of the GNU General Public License (GPL), incorporated herein by reference. @@ -221,6 +222,16 @@ enum _DescStatusBit { RxSizeMask = 0x0000ffff }; +enum sis190_eeprom_access_register_bits { + EECS = 0x00000001, // unused + EECLK = 0x00000002, // unused + EEDO = 0x00000008, // unused + EEDI = 0x00000004, // unused + EEREQ = 0x00000080, + EEROP = 0x00000200, + EEWOP = 0x00000100 // unused +}; + struct sis190_private { void __iomem *mmio_addr; struct pci_dev *pci_dev; @@ -333,27 +344,24 @@ static int __mdio_read(struct net_device *dev, int phy_id, int reg) return mdio_read(tp->mmio_addr, reg); } -static int sis190_read_eeprom(void __iomem *ioaddr, u32 reg) +static u16 __devinit sis190_read_eeprom(void __iomem *ioaddr, u32 reg) { + u16 data = 0xffff; unsigned int i; - u16 data; - u32 val; if (!(SIS_R32(ROMControl) & 0x0002)) return 0; - val = (0x0080 | (0x2 << 8) | (reg << 10)); - - SIS_W32(ROMInterface, val); + SIS_W32(ROMInterface, EEREQ | EEROP | (reg << 10)); for (i = 0; i < 200; i++) { - if (!(SIS_R32(ROMInterface) & 0x0080)) + if (!(SIS_R32(ROMInterface) & EEREQ)) { + data = (SIS_R32(ROMInterface) & 0xffff0000) >> 16; break; + } msleep(1); } - data = (u16) ((SIS_R32(ROMInterface) & 0xffff0000) >> 16); - return data; } -- cgit v1.2.3 From 830fb7d23217ae748df0b16d4d419110810036b7 Mon Sep 17 00:00:00 2001 From: Francois Romieu Date: Sat, 30 Jul 2005 13:12:37 +0200 Subject: [PATCH] sis190: initialisation of MAC address. Extract some mac addr code from SiS's driver. Some magic may hide beyond the isa bridge. The Rx mac control register is now set without condition. Note: good or bad, this part of the code is quite close to sis900.c. Signed-off-by: Francois Romieu Signed-off-by: Jeff Garzik --- drivers/net/sis190.c | 154 +++++++++++++++++++++++++++++++++++++++++++++------ 1 file changed, 138 insertions(+), 16 deletions(-) diff --git a/drivers/net/sis190.c b/drivers/net/sis190.c index d915507e90e..1e8e7111c26 100644 --- a/drivers/net/sis190.c +++ b/drivers/net/sis190.c @@ -232,6 +232,14 @@ enum sis190_eeprom_access_register_bits { EEWOP = 0x00000100 // unused }; +/* EEPROM Addresses */ +enum sis190_eeprom_address { + EEPROMSignature = 0x00, + EEPROMCLK = 0x01, // unused + EEPROMInfo = 0x02, + EEPROMMACAddr = 0x03 +}; + struct sis190_private { void __iomem *mmio_addr; struct pci_dev *pci_dev; @@ -1240,6 +1248,125 @@ static void sis190_tx_timeout(struct net_device *dev) netif_wake_queue(dev); } +static int __devinit sis190_get_mac_addr_from_eeprom(struct pci_dev *pdev, + struct net_device *dev) +{ + struct sis190_private *tp = netdev_priv(dev); + void __iomem *ioaddr = tp->mmio_addr; + u16 sig; + int i; + + net_probe(tp, KERN_INFO "%s: Read MAC address from EEPROM\n", + pci_name(pdev)); + + /* Check to see if there is a sane EEPROM */ + sig = (u16) sis190_read_eeprom(ioaddr, EEPROMSignature); + + if ((sig == 0xffff) || (sig == 0x0000)) { + net_probe(tp, KERN_INFO "%s: Error EEPROM read %x.\n", + pci_name(pdev), sig); + return -EIO; + } + + /* Get MAC address from EEPROM */ + for (i = 0; i < MAC_ADDR_LEN / 2; i++) { + u16 w = sis190_read_eeprom(ioaddr, EEPROMMACAddr + i); + + ((u16 *)dev->dev_addr)[0] = le16_to_cpu(w); + } + + return 0; +} + +/** + * sis190_get_mac_addr_from_apc - Get MAC address for SiS965 model + * @pdev: PCI device + * @dev: network device to get address for + * + * SiS965 model, use APC CMOS RAM to store MAC address. + * APC CMOS RAM is accessed through ISA bridge. + * MAC address is read into @net_dev->dev_addr. + */ +static int __devinit sis190_get_mac_addr_from_apc(struct pci_dev *pdev, + struct net_device *dev) +{ + struct sis190_private *tp = netdev_priv(dev); + struct pci_dev *isa_bridge; + u8 reg, tmp8; + int i; + + net_probe(tp, KERN_INFO "%s: Read MAC address from APC.\n", + pci_name(pdev)); + + isa_bridge = pci_get_device(PCI_VENDOR_ID_SI, 0x0965, NULL); + if (!isa_bridge) { + net_probe(tp, KERN_INFO "%s: Can not find ISA bridge.\n", + pci_name(pdev)); + return -EIO; + } + + /* Enable port 78h & 79h to access APC Registers. */ + pci_read_config_byte(isa_bridge, 0x48, &tmp8); + reg = (tmp8 & ~0x02); + pci_write_config_byte(isa_bridge, 0x48, reg); + udelay(50); + pci_read_config_byte(isa_bridge, 0x48, ®); + + for (i = 0; i < MAC_ADDR_LEN; i++) { + outb(0x9 + i, 0x78); + dev->dev_addr[i] = inb(0x79); + } + + outb(0x12, 0x78); + reg = inb(0x79); + + /* Restore the value to ISA Bridge */ + pci_write_config_byte(isa_bridge, 0x48, tmp8); + pci_dev_put(isa_bridge); + + return 0; +} + +/** + * sis190_init_rxfilter - Initialize the Rx filter + * @dev: network device to initialize + * + * Set receive filter address to our MAC address + * and enable packet filtering. + */ +static inline void sis190_init_rxfilter(struct net_device *dev) +{ + struct sis190_private *tp = netdev_priv(dev); + void __iomem *ioaddr = tp->mmio_addr; + u16 ctl; + int i; + + ctl = SIS_R16(RxMacControl); + /* + * Disable packet filtering before setting filter. + * Note: SiS's driver writes 32 bits but RxMacControl is 16 bits + * only and followed by RxMacAddr (6 bytes). Strange. -- FR + */ + SIS_W16(RxMacControl, ctl & ~0x0f00); + + for (i = 0; i < MAC_ADDR_LEN; i++) + SIS_W8(RxMacAddr + i, dev->dev_addr[i]); + + SIS_W16(RxMacControl, ctl); + SIS_PCI_COMMIT(); +} + +static int sis190_get_mac_addr(struct pci_dev *pdev, struct net_device *dev) +{ + u8 from; + + pci_read_config_byte(pdev, 0x73, &from); + + return (from & 0x00000001) ? + sis190_get_mac_addr_from_apc(pdev, dev) : + sis190_get_mac_addr_from_eeprom(pdev, dev); +} + static void sis190_set_speed_auto(struct net_device *dev) { struct sis190_private *tp = netdev_priv(dev); @@ -1355,7 +1482,7 @@ static int __devinit sis190_init_one(struct pci_dev *pdev, struct sis190_private *tp; struct net_device *dev; void __iomem *ioaddr; - int i, rc; + int rc; if (!printed_version) { net_drv(&debug, KERN_INFO SIS190_DRIVER_NAME " loaded.\n"); @@ -1371,18 +1498,11 @@ static int __devinit sis190_init_one(struct pci_dev *pdev, tp = netdev_priv(dev); ioaddr = tp->mmio_addr; - /* Get MAC address */ - /* Read node address from the EEPROM */ - - if (SIS_R32(ROMControl) & 0x4) { - for (i = 0; i < 3; i++) { - SIS_W16(RxMacAddr + 2*i, - sis190_read_eeprom(ioaddr, 3 + i)); - } - } + rc = sis190_get_mac_addr(pdev, dev); + if (rc < 0) + goto err_release_board; - for (i = 0; i < MAC_ADDR_LEN; i++) - dev->dev_addr[i] = SIS_R8(RxMacAddr + i); + sis190_init_rxfilter(dev); INIT_WORK(&tp->phy_task, sis190_phy_task, dev); @@ -1403,10 +1523,8 @@ static int __devinit sis190_init_one(struct pci_dev *pdev, spin_lock_init(&tp->lock); rc = register_netdev(dev); - if (rc < 0) { - sis190_release_board(pdev); - goto out; - } + if (rc < 0) + goto err_release_board; pci_set_drvdata(pdev, dev); @@ -1423,6 +1541,10 @@ static int __devinit sis190_init_one(struct pci_dev *pdev, sis190_set_speed_auto(dev); out: return rc; + +err_release_board: + sis190_release_board(pdev); + goto out; } static void __devexit sis190_remove_one(struct pci_dev *pdev) -- cgit v1.2.3 From 8b5641d4f1f7376257783b79f121a19ccd86b56b Mon Sep 17 00:00:00 2001 From: Francois Romieu Date: Sat, 30 Jul 2005 13:13:03 +0200 Subject: [PATCH] sis190: the size of the Rx buffer is constrained Add a restriction to the size of the Rx buffer SiS driver forces the size of any Rx buffer to be a multiple of 64 bit. I would not be surprized that it goes along with some alignment issues which have been experienced before. So far it does not make much of a difference (both drivers use 1536 bytes buffer). Signed-off-by: Francois Romieu Signed-off-by: Jeff Garzik --- drivers/net/sis190.c | 8 +++++++- 1 file changed, 7 insertions(+), 1 deletion(-) diff --git a/drivers/net/sis190.c b/drivers/net/sis190.c index 1e8e7111c26..2229698debb 100644 --- a/drivers/net/sis190.c +++ b/drivers/net/sis190.c @@ -69,6 +69,7 @@ #define TX_RING_BYTES (NUM_TX_DESC * sizeof(struct TxDesc)) #define RX_RING_BYTES (NUM_RX_DESC * sizeof(struct RxDesc)) #define RX_BUF_SIZE 1536 +#define RX_BUF_MASK 0xfff8 #define SIS190_REGS_SIZE 0x80 #define SIS190_TX_TIMEOUT (6*HZ) @@ -400,7 +401,7 @@ static inline void sis190_give_to_asic(struct RxDesc *desc, u32 rx_buf_sz) u32 eor = le32_to_cpu(desc->size) & RingEnd; desc->PSize = 0x0; - desc->size = cpu_to_le32(rx_buf_sz | eor); + desc->size = cpu_to_le32((rx_buf_sz & RX_BUF_MASK) | eor); wmb(); desc->status = cpu_to_le32(OWNbit | INTbit); } @@ -924,6 +925,11 @@ static void sis190_set_rxbufsize(struct sis190_private *tp, unsigned int mtu = dev->mtu; tp->rx_buf_sz = (mtu > RX_BUF_SIZE) ? mtu + ETH_HLEN + 8 : RX_BUF_SIZE; + /* RxDesc->size has a licence to kill the lower bits */ + if (tp->rx_buf_sz & 0x07) { + tp->rx_buf_sz += 8; + tp->rx_buf_sz &= RX_BUF_MASK; + } } static int sis190_open(struct net_device *dev) -- cgit v1.2.3 From bcad5e537840ef6fa28b2f1e126fefb4c39a7248 Mon Sep 17 00:00:00 2001 From: Francois Romieu Date: Sat, 30 Jul 2005 13:13:47 +0200 Subject: [PATCH] sis190: extract bits definition from SiS driver. extract bits definition from SiS driver - fix the Rx stats; - minor pieces of documentation. Signed-off-by: Francois Romieu Signed-off-by: Jeff Garzik --- drivers/net/sis190.c | 102 +++++++++++++++++++++++++++++++++++++-------------- 1 file changed, 74 insertions(+), 28 deletions(-) diff --git a/drivers/net/sis190.c b/drivers/net/sis190.c index 2229698debb..3c33b2d1485 100644 --- a/drivers/net/sis190.c +++ b/drivers/net/sis190.c @@ -64,8 +64,8 @@ #define MAC_ADDR_LEN 6 -#define NUM_TX_DESC 64 -#define NUM_RX_DESC 64 +#define NUM_TX_DESC 64 /* [8..1024] */ +#define NUM_RX_DESC 64 /* [8..8192] */ #define TX_RING_BYTES (NUM_TX_DESC * sizeof(struct TxDesc)) #define RX_RING_BYTES (NUM_RX_DESC * sizeof(struct RxDesc)) #define RX_BUF_SIZE 1536 @@ -149,12 +149,6 @@ enum sis190_register_content { RxHalt = 0x00000002, TxHalt = 0x00000001, - /* RxStatusDesc */ - RxRES = 0x00200000, // unused - RxCRC = 0x00080000, - RxRUNT = 0x00100000, // unused - RxRWT = 0x00400000, // unused - /* {Rx/Tx}CmdBits */ CmdReset = 0x10, CmdRxEnb = 0x08, // unused @@ -212,15 +206,55 @@ struct RxDesc { enum _DescStatusBit { /* _Desc.status */ - OWNbit = 0x80000000, - INTbit = 0x40000000, - DEFbit = 0x00200000, - CRCbit = 0x00020000, - PADbit = 0x00010000, + OWNbit = 0x80000000, // RXOWN/TXOWN + INTbit = 0x40000000, // RXINT/TXINT + CRCbit = 0x00020000, // CRCOFF/CRCEN + PADbit = 0x00010000, // PREADD/PADEN /* _Desc.size */ - RingEnd = (1 << 31), - /* _Desc.PSize */ + RingEnd = 0x80000000, + /* TxDesc.status */ + LSEN = 0x08000000, // TSO ? -- FR + IPCS = 0x04000000, + TCPCS = 0x02000000, + UDPCS = 0x01000000, + BSTEN = 0x00800000, + EXTEN = 0x00400000, + DEFEN = 0x00200000, + BKFEN = 0x00100000, + CRSEN = 0x00080000, + COLEN = 0x00040000, + THOL3 = 0x30000000, + THOL2 = 0x20000000, + THOL1 = 0x10000000, + THOL0 = 0x00000000, + /* RxDesc.status */ + IPON = 0x20000000, + TCPON = 0x10000000, + UDPON = 0x08000000, + Wakup = 0x00400000, + Magic = 0x00200000, + Pause = 0x00100000, + DEFbit = 0x00200000, + BCAST = 0x000c0000, + MCAST = 0x00080000, + UCAST = 0x00040000, + /* RxDesc.PSize */ + TAGON = 0x80000000, + RxDescCountMask = 0x7f000000, // multi-desc pkt when > 1 ? -- FR + ABORT = 0x00800000, + SHORT = 0x00400000, + LIMIT = 0x00200000, + MIIER = 0x00100000, + OVRUN = 0x00080000, + NIBON = 0x00040000, + COLON = 0x00020000, + CRCOK = 0x00010000, RxSizeMask = 0x0000ffff + /* + * The asic could apparently do vlan, TSO, jumbo (sis191 only) and + * provide two (unused with Linux) Tx queues. No publically + * available documentation alas. + */ }; enum sis190_eeprom_access_register_bits { @@ -487,6 +521,26 @@ static inline int sis190_try_rx_copy(struct sk_buff **sk_buff, int pkt_size, return ret; } +static inline int sis190_rx_pkt_err(u32 status, struct net_device_stats *stats) +{ +#define ErrMask (OVRUN | SHORT | LIMIT | MIIER | NIBON | COLON | ABORT) + + if ((status & CRCOK) && !(status & ErrMask)) + return 0; + + if (!(status & CRCOK)) + stats->rx_crc_errors++; + else if (status & OVRUN) + stats->rx_over_errors++; + else if (status & (SHORT | LIMIT)) + stats->rx_length_errors++; + else if (status & (MIIER | NIBON | COLON)) + stats->rx_frame_errors++; + + stats->rx_errors++; + return -1; +} + static int sis190_rx_interrupt(struct net_device *dev, struct sis190_private *tp, void __iomem *ioaddr) { @@ -510,19 +564,9 @@ static int sis190_rx_interrupt(struct net_device *dev, // net_intr(tp, KERN_INFO "%s: Rx PSize = %08x.\n", dev->name, // status); - if (status & RxCRC) { - net_intr(tp, KERN_INFO "%s: bad crc. status = %08x.\n", - dev->name, status); - stats->rx_errors++; - stats->rx_crc_errors++; + if (sis190_rx_pkt_err(status, stats) < 0) sis190_give_to_asic(desc, tp->rx_buf_sz); - } else if (!(status & PADbit)) { - net_intr(tp, KERN_INFO "%s: bad pad. status = %08x.\n", - dev->name, status); - stats->rx_errors++; - stats->rx_length_errors++; - sis190_give_to_asic(desc, tp->rx_buf_sz); - } else { + else { struct sk_buff *skb = tp->Rx_skbuff[entry]; int pkt_size = (status & RxSizeMask) - 4; void (*pci_action)(struct pci_dev *, dma_addr_t, @@ -559,8 +603,10 @@ static int sis190_rx_interrupt(struct net_device *dev, sis190_rx_skb(skb); dev->last_rx = jiffies; - stats->rx_bytes += pkt_size; stats->rx_packets++; + stats->rx_bytes += pkt_size; + if ((status & BCAST) == MCAST) + stats->multicast++; } } count = cur_rx - tp->cur_rx; -- cgit v1.2.3 From 3cec93c7124c3037dbff826d6c08e9758a301cd7 Mon Sep 17 00:00:00 2001 From: Francois Romieu Date: Sat, 30 Jul 2005 13:14:18 +0200 Subject: [PATCH] sis190: add endian annotations. Add endian annotations. Signed-off-by: Alexey Dobriyan Signed-off-by: Francois Romieu Signed-off-by: Jeff Garzik --- drivers/net/sis190.c | 18 +++++++++--------- 1 file changed, 9 insertions(+), 9 deletions(-) diff --git a/drivers/net/sis190.c b/drivers/net/sis190.c index 3c33b2d1485..2387d484403 100644 --- a/drivers/net/sis190.c +++ b/drivers/net/sis190.c @@ -191,17 +191,17 @@ enum sis190_register_content { }; struct TxDesc { - u32 PSize; - u32 status; - u32 addr; - u32 size; + __le32 PSize; + __le32 status; + __le32 addr; + __le32 size; }; struct RxDesc { - u32 PSize; - u32 status; - u32 addr; - u32 size; + __le32 PSize; + __le32 status; + __le32 addr; + __le32 size; }; enum _DescStatusBit { @@ -1322,7 +1322,7 @@ static int __devinit sis190_get_mac_addr_from_eeprom(struct pci_dev *pdev, /* Get MAC address from EEPROM */ for (i = 0; i < MAC_ADDR_LEN / 2; i++) { - u16 w = sis190_read_eeprom(ioaddr, EEPROMMACAddr + i); + __le16 w = sis190_read_eeprom(ioaddr, EEPROMMACAddr + i); ((u16 *)dev->dev_addr)[0] = le16_to_cpu(w); } -- cgit v1.2.3 From 9ede109bbe93d5bbe4271e346106847fbfea95a1 Mon Sep 17 00:00:00 2001 From: Francois Romieu Date: Sat, 30 Jul 2005 13:14:38 +0200 Subject: [PATCH] sis190: allow a non-hardcoded ID for the PHY. Allow a non-hardcoded ID for the PHY This is the first step before the driver probes for the PHY address. Signed-off-by: Francois Romieu Signed-off-by: Jeff Garzik --- drivers/net/sis190.c | 38 ++++++++++++++++++-------------------- 1 file changed, 18 insertions(+), 20 deletions(-) diff --git a/drivers/net/sis190.c b/drivers/net/sis190.c index 2387d484403..f78799c4235 100644 --- a/drivers/net/sis190.c +++ b/drivers/net/sis190.c @@ -354,21 +354,17 @@ static void __mdio_cmd(void __iomem *ioaddr, u32 ctl) printk(KERN_ERR PFX "PHY command failed !\n"); } -static void mdio_write(void __iomem *ioaddr, int reg, int val) +static void mdio_write(void __iomem *ioaddr, int phy_id, int reg, int val) { - u32 pmd = 1; - __mdio_cmd(ioaddr, EhnMIIreq | EhnMIIwrite | - (((u32) reg) << EhnMIIregShift) | (pmd << EhnMIIpmdShift) | + (((u32) reg) << EhnMIIregShift) | (phy_id << EhnMIIpmdShift) | (((u32) val) << EhnMIIdataShift)); } -static int mdio_read(void __iomem *ioaddr, int reg) +static int mdio_read(void __iomem *ioaddr, int phy_id, int reg) { - u32 pmd = 1; - __mdio_cmd(ioaddr, EhnMIIreq | EhnMIIread | - (((u32) reg) << EhnMIIregShift) | (pmd << EhnMIIpmdShift)); + (((u32) reg) << EhnMIIregShift) | (phy_id << EhnMIIpmdShift)); return (u16) (SIS_R32(GMIIControl) >> EhnMIIdataShift); } @@ -377,14 +373,14 @@ static void __mdio_write(struct net_device *dev, int phy_id, int reg, int val) { struct sis190_private *tp = netdev_priv(dev); - mdio_write(tp->mmio_addr, reg, val); + mdio_write(tp->mmio_addr, phy_id, reg, val); } static int __mdio_read(struct net_device *dev, int phy_id, int reg) { struct sis190_private *tp = netdev_priv(dev); - return mdio_read(tp->mmio_addr, reg); + return mdio_read(tp->mmio_addr, phy_id, reg); } static u16 __devinit sis190_read_eeprom(void __iomem *ioaddr, u32 reg) @@ -876,18 +872,19 @@ static void sis190_phy_task(void * data) struct net_device *dev = data; struct sis190_private *tp = netdev_priv(dev); void __iomem *ioaddr = tp->mmio_addr; + int phy_id = tp->mii_if.phy_id; u16 val; rtnl_lock(); - val = mdio_read(ioaddr, MII_BMCR); + val = mdio_read(ioaddr, phy_id, MII_BMCR); if (val & BMCR_RESET) { // FIXME: needlessly high ? -- FR 02/07/2005 mod_timer(&tp->timer, jiffies + HZ/10); - } else if (!(mdio_read(ioaddr, MII_BMSR) & BMSR_ANEGCOMPLETE)) { + } else if (!(mdio_read(ioaddr, phy_id, MII_BMSR) & BMSR_ANEGCOMPLETE)) { net_link(tp, KERN_WARNING "%s: PHY reset until link up.\n", dev->name); - mdio_write(ioaddr, MII_BMCR, val | BMCR_RESET); + mdio_write(ioaddr, phy_id, MII_BMCR, val | BMCR_RESET); mod_timer(&tp->timer, jiffies + SIS190_PHY_TIMEOUT); } else { /* Rejoice ! */ @@ -917,10 +914,10 @@ static void sis190_phy_task(void * data) { 0, "unknown", 0x0000 } }, *p; - val = mdio_read(ioaddr, 0x1f); + val = mdio_read(ioaddr, phy_id, 0x1f); net_link(tp, KERN_INFO "%s: mii ext = %04x.\n", dev->name, val); - val = mdio_read(ioaddr, MII_LPA); + val = mdio_read(ioaddr, phy_id, MII_LPA); net_link(tp, KERN_INFO "%s: mii lpa = %04x.\n", dev->name, val); for (p = reg31; p->ctl; p++) { @@ -1250,7 +1247,7 @@ static struct net_device * __devinit sis190_init_board(struct pci_dev *pdev) tp->mii_if.dev = dev; tp->mii_if.mdio_read = __mdio_read; tp->mii_if.mdio_write = __mdio_write; - // tp->mii_if.phy_id = XXX; + tp->mii_if.phy_id = 1; tp->mii_if.phy_id_mask = 0x1f; tp->mii_if.reg_num_mask = 0x1f; @@ -1423,23 +1420,24 @@ static void sis190_set_speed_auto(struct net_device *dev) { struct sis190_private *tp = netdev_priv(dev); void __iomem *ioaddr = tp->mmio_addr; + int phy_id = tp->mii_if.phy_id; int val; net_link(tp, KERN_INFO "%s: Enabling Auto-negotiation.\n", dev->name); - val = mdio_read(ioaddr, MII_ADVERTISE); + val = mdio_read(ioaddr, phy_id, MII_ADVERTISE); // Enable 10/100 Full/Half Mode, leave MII_ADVERTISE bit4:0 // unchanged. - mdio_write(ioaddr, MII_ADVERTISE, (val & ADVERTISE_SLCT) | + mdio_write(ioaddr, phy_id, MII_ADVERTISE, (val & ADVERTISE_SLCT) | ADVERTISE_100FULL | ADVERTISE_10FULL | ADVERTISE_100HALF | ADVERTISE_10HALF); // Enable 1000 Full Mode. - mdio_write(ioaddr, MII_CTRL1000, ADVERTISE_1000FULL); + mdio_write(ioaddr, phy_id, MII_CTRL1000, ADVERTISE_1000FULL); // Enable auto-negotiation and restart auto-negotiation. - mdio_write(ioaddr, MII_BMCR, + mdio_write(ioaddr, phy_id, MII_BMCR, BMCR_ANENABLE | BMCR_ANRESTART | BMCR_RESET); } -- cgit v1.2.3 From fc10c39d7920b1db9ad2d80fa845896e529355dc Mon Sep 17 00:00:00 2001 From: Francois Romieu Date: Sat, 30 Jul 2005 13:15:01 +0200 Subject: [PATCH] sis190: dummy read is required by the status register Add a dummy read before accessing the status register SiS driver suggests it. Signed-off-by: Francois Romieu Signed-off-by: Jeff Garzik --- drivers/net/sis190.c | 9 ++++++++- 1 file changed, 8 insertions(+), 1 deletion(-) diff --git a/drivers/net/sis190.c b/drivers/net/sis190.c index f78799c4235..392110ede7b 100644 --- a/drivers/net/sis190.c +++ b/drivers/net/sis190.c @@ -383,6 +383,12 @@ static int __mdio_read(struct net_device *dev, int phy_id, int reg) return mdio_read(tp->mmio_addr, phy_id, reg); } +static u16 mdio_read_latched(void __iomem *ioaddr, int phy_id, int reg) +{ + mdio_read(ioaddr, phy_id, reg); + return mdio_read(ioaddr, phy_id, reg); +} + static u16 __devinit sis190_read_eeprom(void __iomem *ioaddr, u32 reg) { u16 data = 0xffff; @@ -881,7 +887,8 @@ static void sis190_phy_task(void * data) if (val & BMCR_RESET) { // FIXME: needlessly high ? -- FR 02/07/2005 mod_timer(&tp->timer, jiffies + HZ/10); - } else if (!(mdio_read(ioaddr, phy_id, MII_BMSR) & BMSR_ANEGCOMPLETE)) { + } else if (!(mdio_read_latched(ioaddr, phy_id, MII_BMSR) & + BMSR_ANEGCOMPLETE)) { net_link(tp, KERN_WARNING "%s: PHY reset until link up.\n", dev->name); mdio_write(ioaddr, phy_id, MII_BMCR, val | BMCR_RESET); -- cgit v1.2.3 From fcb9821d3dd62ede360e7991734ac22b79e9a4f0 Mon Sep 17 00:00:00 2001 From: Francois Romieu Date: Sat, 30 Jul 2005 13:15:22 +0200 Subject: [PATCH] sis190: new PHY detection code. New PHY detection code. Signed-off-by: Francois Romieu Signed-off-by: Jeff Garzik --- drivers/net/sis190.c | 216 +++++++++++++++++++++++++++++++++++++++++++++++++-- 1 file changed, 209 insertions(+), 7 deletions(-) diff --git a/drivers/net/sis190.c b/drivers/net/sis190.c index 392110ede7b..fe2ab6fd138 100644 --- a/drivers/net/sis190.c +++ b/drivers/net/sis190.c @@ -43,6 +43,10 @@ #define net_tx_err(p, arg...) if (netif_msg_tx_err(p)) \ printk(arg) +#define PHY_MAX_ADDR 32 +#define PHY_ID_ANY 0x1f +#define MII_REG_ANY 0x1f + #ifdef CONFIG_SIS190_NAPI #define NAPI_SUFFIX "-NAPI" #else @@ -295,6 +299,33 @@ struct sis190_private { struct timer_list timer; u32 msg_enable; struct mii_if_info mii_if; + struct list_head first_phy; +}; + +struct sis190_phy { + struct list_head list; + int phy_id; + u16 id[2]; + u16 status; + u8 type; +}; + +enum sis190_phy_type { + UNKNOWN = 0x00, + HOME = 0x01, + LAN = 0x02, + MIX = 0x03 +}; + +static struct mii_chip_info { + const char *name; + u16 id[2]; + unsigned int type; +} mii_chip_table[] = { + { "Broadcom PHY BCM5461", { 0x0020, 0x60c0 }, LAN }, + { "Agere PHY ET1101B", { 0x0282, 0xf010 }, LAN }, + { "Marvell PHY 88E1111", { 0x0141, 0x0cc0 }, LAN }, + { NULL, } }; const static struct { @@ -1174,6 +1205,177 @@ static struct net_device_stats *sis190_get_stats(struct net_device *dev) return &tp->stats; } +static void sis190_free_phy(struct list_head *first_phy) +{ + struct sis190_phy *cur, *next; + + list_for_each_entry_safe(cur, next, first_phy, list) { + kfree(cur); + } +} + +/** + * sis190_default_phy - Select default PHY for sis190 mac. + * @dev: the net device to probe for + * + * Select first detected PHY with link as default. + * If no one is link on, select PHY whose types is HOME as default. + * If HOME doesn't exist, select LAN. + */ +static u16 sis190_default_phy(struct net_device *dev) +{ + struct sis190_phy *phy, *phy_home, *phy_default, *phy_lan; + struct sis190_private *tp = netdev_priv(dev); + struct mii_if_info *mii_if = &tp->mii_if; + void __iomem *ioaddr = tp->mmio_addr; + u16 status; + + phy_home = phy_default = phy_lan = NULL; + + list_for_each_entry(phy, &tp->first_phy, list) { + status = mdio_read_latched(ioaddr, phy->phy_id, MII_BMSR); + + // Link ON & Not select default PHY & not ghost PHY. + if ((status & BMSR_LSTATUS) && + !phy_default && + (phy->type != UNKNOWN)) { + phy_default = phy; + } else { + status = mdio_read(ioaddr, phy->phy_id, MII_BMCR); + mdio_write(ioaddr, phy->phy_id, MII_BMCR, + status | BMCR_ANENABLE | BMCR_ISOLATE); + if (phy->type == HOME) + phy_home = phy; + else if (phy->type == LAN) + phy_lan = phy; + } + } + + if (!phy_default) { + if (phy_home) + phy_default = phy_home; + else if (phy_lan) + phy_default = phy_lan; + else + phy_default = list_entry(&tp->first_phy, + struct sis190_phy, list); + } + + if (mii_if->phy_id != phy_default->phy_id) { + mii_if->phy_id = phy_default->phy_id; + net_probe(tp, KERN_INFO + "%s: Using transceiver at address %d as default.\n", + dev->name, mii_if->phy_id); + } + + status = mdio_read(ioaddr, mii_if->phy_id, MII_BMCR); + status &= (~BMCR_ISOLATE); + + mdio_write(ioaddr, mii_if->phy_id, MII_BMCR, status); + status = mdio_read_latched(ioaddr, mii_if->phy_id, MII_BMSR); + + return status; +} + +static void sis190_init_phy(struct net_device *dev, struct sis190_private *tp, + struct sis190_phy *phy, unsigned int phy_id, + u16 mii_status) +{ + void __iomem *ioaddr = tp->mmio_addr; + struct mii_chip_info *p; + + INIT_LIST_HEAD(&phy->list); + phy->status = mii_status; + phy->phy_id = phy_id; + + phy->id[0] = mdio_read(ioaddr, phy_id, MII_PHYSID1); + phy->id[1] = mdio_read(ioaddr, phy_id, MII_PHYSID2); + + for (p = mii_chip_table; p->type; p++) { + if ((p->id[0] == phy->id[0]) && + (p->id[1] == (phy->id[1] & 0xfff0))) { + break; + } + } + + if (p->id[1]) { + phy->type = (p->type == MIX) ? + ((mii_status & (BMSR_100FULL | BMSR_100HALF)) ? + LAN : HOME) : p->type; + } else + phy->type = UNKNOWN; + + net_probe(tp, KERN_INFO "%s: %s transceiver at address %d.\n", + dev->name, (phy->type == UNKNOWN) ? "Unknown PHY" : p->name, + phy_id); +} + +/** + * sis190_mii_probe - Probe MII PHY for sis190 + * @dev: the net device to probe for + * + * Search for total of 32 possible mii phy addresses. + * Identify and set current phy if found one, + * return error if it failed to found. + */ +static int __devinit sis190_mii_probe(struct net_device *dev) +{ + struct sis190_private *tp = netdev_priv(dev); + struct mii_if_info *mii_if = &tp->mii_if; + void __iomem *ioaddr = tp->mmio_addr; + int phy_id; + int rc = 0; + + INIT_LIST_HEAD(&tp->first_phy); + + for (phy_id = 0; phy_id < PHY_MAX_ADDR; phy_id++) { + struct sis190_phy *phy; + u16 status; + + status = mdio_read_latched(ioaddr, phy_id, MII_BMSR); + + // Try next mii if the current one is not accessible. + if (status == 0xffff || status == 0x0000) + continue; + + phy = kmalloc(sizeof(*phy), GFP_KERNEL); + if (!phy) { + sis190_free_phy(&tp->first_phy); + rc = -ENOMEM; + goto out; + } + + sis190_init_phy(dev, tp, phy, phy_id, status); + + list_add(&tp->first_phy, &phy->list); + } + + if (list_empty(&tp->first_phy)) { + net_probe(tp, KERN_INFO "%s: No MII transceivers found!\n", + dev->name); + rc = -EIO; + goto out; + } + + /* Select default PHY for mac */ + sis190_default_phy(dev); + + mii_if->dev = dev; + mii_if->mdio_read = __mdio_read; + mii_if->mdio_write = __mdio_write; + mii_if->phy_id_mask = PHY_ID_ANY; + mii_if->reg_num_mask = MII_REG_ANY; +out: + return rc; +} + +static void __devexit sis190_mii_remove(struct net_device *dev) +{ + struct sis190_private *tp = netdev_priv(dev); + + sis190_free_phy(&tp->first_phy); +} + static void sis190_release_board(struct pci_dev *pdev) { struct net_device *dev = pci_get_drvdata(pdev); @@ -1251,13 +1453,6 @@ static struct net_device * __devinit sis190_init_board(struct pci_dev *pdev) tp->pci_dev = pdev; tp->mmio_addr = ioaddr; - tp->mii_if.dev = dev; - tp->mii_if.mdio_read = __mdio_read; - tp->mii_if.mdio_write = __mdio_write; - tp->mii_if.phy_id = 1; - tp->mii_if.phy_id_mask = 0x1f; - tp->mii_if.reg_num_mask = 0x1f; - sis190_irq_mask_and_ack(ioaddr); sis190_soft_reset(ioaddr); @@ -1585,6 +1780,10 @@ static int __devinit sis190_init_one(struct pci_dev *pdev, pci_set_drvdata(pdev, dev); + rc = sis190_mii_probe(dev); + if (rc < 0) + goto err_unregister_dev; + net_probe(tp, KERN_INFO "%s: %s at %p (IRQ: %d), " "%2.2x:%2.2x:%2.2x:%2.2x:%2.2x:%2.2x\n", pci_name(pdev), sis_chip_info[ent->driver_data].name, @@ -1599,6 +1798,8 @@ static int __devinit sis190_init_one(struct pci_dev *pdev, out: return rc; +err_unregister_dev: + unregister_netdev(dev); err_release_board: sis190_release_board(pdev); goto out; @@ -1608,6 +1809,7 @@ static void __devexit sis190_remove_one(struct pci_dev *pdev) { struct net_device *dev = pci_get_drvdata(pdev); + sis190_mii_remove(dev); unregister_netdev(dev); sis190_release_board(pdev); pci_set_drvdata(pdev, NULL); -- cgit v1.2.3 From 560d3d521decc6d05dc0d6e007f1d2e1d3048102 Mon Sep 17 00:00:00 2001 From: Francois Romieu Date: Sat, 30 Jul 2005 13:15:51 +0200 Subject: [PATCH] sis190: PHY identifier for the K8S-MX motherboard. Added PHY identifier for the Asus K8S-MX motherboard Note: the same ID appears in the sis900 driver. Signed-off-by: Lars Vahlenberg Signed-off-by: Francois Romieu Signed-off-by: Jeff Garzik --- drivers/net/sis190.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/net/sis190.c b/drivers/net/sis190.c index fe2ab6fd138..84bc2299f93 100644 --- a/drivers/net/sis190.c +++ b/drivers/net/sis190.c @@ -325,6 +325,7 @@ static struct mii_chip_info { { "Broadcom PHY BCM5461", { 0x0020, 0x60c0 }, LAN }, { "Agere PHY ET1101B", { 0x0282, 0xf010 }, LAN }, { "Marvell PHY 88E1111", { 0x0141, 0x0cc0 }, LAN }, + { "Realtek PHY RTL8201", { 0x0000, 0x8200 }, LAN }, { NULL, } }; -- cgit v1.2.3 From 8348b4db5f56d2c0d3849db06055225ec15b255a Mon Sep 17 00:00:00 2001 From: Francois Romieu Date: Sat, 30 Jul 2005 13:16:14 +0200 Subject: [PATCH] sis190: compare the lpa to the local advertisement The station control register must depend on both the advertisement and the lpa The link partner ability has better be intersected with the current advertised value before it is feed to the station control register. Sight-catched-by: Lars Vahlenberg Signed-off-by: Francois Romieu Signed-off-by: Jeff Garzik --- drivers/net/sis190.c | 7 ++++++- 1 file changed, 6 insertions(+), 1 deletion(-) diff --git a/drivers/net/sis190.c b/drivers/net/sis190.c index 84bc2299f93..915ff009c29 100644 --- a/drivers/net/sis190.c +++ b/drivers/net/sis190.c @@ -952,12 +952,17 @@ static void sis190_phy_task(void * data) 0x01 | _10bpsH }, { 0, "unknown", 0x0000 } }, *p; + u16 adv; val = mdio_read(ioaddr, phy_id, 0x1f); net_link(tp, KERN_INFO "%s: mii ext = %04x.\n", dev->name, val); val = mdio_read(ioaddr, phy_id, MII_LPA); - net_link(tp, KERN_INFO "%s: mii lpa = %04x.\n", dev->name, val); + adv = mdio_read(ioaddr, phy_id, MII_ADVERTISE); + net_link(tp, KERN_INFO "%s: mii lpa = %04x adv = %04x.\n", + dev->name, val, adv); + + val &= adv; for (p = reg31; p->ctl; p++) { if ((val & p->val) == p->val) -- cgit v1.2.3 From 24d109422787119337cd83732feef930d6a23f5c Mon Sep 17 00:00:00 2001 From: Dave Airlie Date: Fri, 5 Aug 2005 21:52:18 +1000 Subject: drm: fix ioctl direction in r128 getparam Set the IOWR correctly for r128 getparam. From: Egbert Eich Signed-off-by: Dave Airlie --- drivers/char/drm/r128_drm.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/char/drm/r128_drm.h b/drivers/char/drm/r128_drm.h index 0cba17d1e0f..b616cd3ed2c 100644 --- a/drivers/char/drm/r128_drm.h +++ b/drivers/char/drm/r128_drm.h @@ -215,7 +215,7 @@ typedef struct drm_r128_sarea { #define DRM_IOCTL_R128_INDIRECT DRM_IOWR(DRM_COMMAND_BASE + DRM_R128_INDIRECT, drm_r128_indirect_t) #define DRM_IOCTL_R128_FULLSCREEN DRM_IOW( DRM_COMMAND_BASE + DRM_R128_FULLSCREEN, drm_r128_fullscreen_t) #define DRM_IOCTL_R128_CLEAR2 DRM_IOW( DRM_COMMAND_BASE + DRM_R128_CLEAR2, drm_r128_clear2_t) -#define DRM_IOCTL_R128_GETPARAM DRM_IOW( DRM_COMMAND_BASE + DRM_R128_GETPARAM, drm_r128_getparam_t) +#define DRM_IOCTL_R128_GETPARAM DRM_IOWR( DRM_COMMAND_BASE + DRM_R128_GETPARAM, drm_r128_getparam_t) #define DRM_IOCTL_R128_FLIP DRM_IO( DRM_COMMAND_BASE + DRM_R128_FLIP) typedef struct drm_r128_init { -- cgit v1.2.3 From c73681e77b40697d16ada777adf2c6dc4db05917 Mon Sep 17 00:00:00 2001 From: Dave Airlie Date: Fri, 5 Aug 2005 22:02:48 +1000 Subject: drm: copy the right data back to userspace for getreserved contexts ioctl This fixes the information copied back to userspace by the get reserved contexts ioctl. From: Egbert Eich Signed-off-by: Dave Airlie --- drivers/char/drm/drm_context.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/char/drm/drm_context.c b/drivers/char/drm/drm_context.c index a7cfabd1ca2..5af46c9830e 100644 --- a/drivers/char/drm/drm_context.c +++ b/drivers/char/drm/drm_context.c @@ -369,7 +369,7 @@ int drm_resctx( struct inode *inode, struct file *filp, for ( i = 0 ; i < DRM_RESERVED_CONTEXTS ; i++ ) { ctx.handle = i; if ( copy_to_user( &res.contexts[i], - &i, sizeof(i) ) ) + &ctx, sizeof(ctx) ) ) return -EFAULT; } } -- cgit v1.2.3 From d1f2b55ad2c11f46e30547a9f7754e99b478348e Mon Sep 17 00:00:00 2001 From: Dave Airlie Date: Fri, 5 Aug 2005 22:11:22 +1000 Subject: drm: updated DRM map patch for 32/64 bit systems I basically combined Paul's patches with additions that I had made for PCI scatter gather. I also tried more carefully to avoid problems with the same token assigned multiple times while trying to use the base address in the token if possible to gain as much backward compatibility as possible for broken DRI clients. From: Paul Mackerras and Egbert Eich Signed-off-by: Dave Airlie --- drivers/char/drm/drmP.h | 14 ++++---- drivers/char/drm/drm_bufs.c | 81 ++++++++++++++++++++++++++++++------------ drivers/char/drm/drm_context.c | 15 ++++++-- drivers/char/drm/drm_ioctl.c | 2 +- drivers/char/drm/drm_proc.c | 4 +-- drivers/char/drm/drm_scatter.c | 11 ++++-- drivers/char/drm/drm_vm.c | 20 +++++------ drivers/char/drm/ffb_drv.c | 5 +-- drivers/char/drm/i810_dma.c | 1 + drivers/char/drm/i830_dma.c | 1 + drivers/char/drm/mga_dma.c | 1 + drivers/char/drm/mga_drm.h | 2 +- drivers/char/drm/mga_ioc32.c | 67 ++++++++++++++++++++++++++++++++++ drivers/char/drm/r128_cce.c | 6 ++-- drivers/char/drm/radeon_cp.c | 1 + 15 files changed, 177 insertions(+), 54 deletions(-) diff --git a/drivers/char/drm/drmP.h b/drivers/char/drm/drmP.h index fb2af927914..0a435899697 100644 --- a/drivers/char/drm/drmP.h +++ b/drivers/char/drm/drmP.h @@ -539,6 +539,7 @@ typedef struct drm_dma_handle { typedef struct drm_map_list { struct list_head head; /**< list head */ drm_map_t *map; /**< mapping */ + unsigned int user_token; } drm_map_list_t; typedef drm_map_t drm_local_map_t; @@ -759,6 +760,7 @@ typedef struct drm_device { struct drm_driver *driver; drm_local_map_t *agp_buffer_map; + unsigned int agp_buffer_token; drm_head_t primary; /**< primary screen head */ } drm_device_t; @@ -1048,16 +1050,12 @@ static __inline__ void drm_core_ioremapfree(struct drm_map *map, struct drm_devi drm_ioremapfree( map->handle, map->size, dev ); } -static __inline__ struct drm_map *drm_core_findmap(struct drm_device *dev, unsigned long offset) +static __inline__ struct drm_map *drm_core_findmap(struct drm_device *dev, unsigned int token) { - struct list_head *_list; - list_for_each( _list, &dev->maplist->head ) { - drm_map_list_t *_entry = list_entry( _list, drm_map_list_t, head ); - if ( _entry->map && - _entry->map->offset == offset ) { + drm_map_list_t *_entry; + list_for_each_entry(_entry, &dev->maplist->head, head) + if (_entry->user_token == token) return _entry->map; - } - } return NULL; } diff --git a/drivers/char/drm/drm_bufs.c b/drivers/char/drm/drm_bufs.c index fcc8d244f46..d1e0b106c26 100644 --- a/drivers/char/drm/drm_bufs.c +++ b/drivers/char/drm/drm_bufs.c @@ -64,13 +64,41 @@ static drm_local_map_t *drm_find_matching_map(drm_device_t *dev, return NULL; } -#ifdef CONFIG_COMPAT /* - * Used to allocate 32-bit handles for _DRM_SHM regions - * The 0x10000000 value is chosen to be out of the way of - * FB/register and GART physical addresses. + * Used to allocate 32-bit handles for mappings. */ -static unsigned int map32_handle = 0x10000000; +#define START_RANGE 0x10000000 +#define END_RANGE 0x40000000 + +#ifdef _LP64 +static __inline__ unsigned int HandleID(unsigned long lhandle, drm_device_t *dev) +{ + static unsigned int map32_handle = START_RANGE; + unsigned int hash; + + if (lhandle & 0xffffffff00000000) { + hash = map32_handle; + map32_handle += PAGE_SIZE; + if (map32_handle > END_RANGE) + map32_handle = START_RANGE; + } else + hash = lhandle; + + while (1) { + drm_map_list_t *_entry; + list_for_each_entry(_entry, &dev->maplist->head,head) { + if (_entry->user_token == hash) + break; + } + if (&_entry->head == &dev->maplist->head) + return hash; + + hash += PAGE_SIZE; + map32_handle += PAGE_SIZE; + } +} +#else +# define HandleID(x,dev) (unsigned int)(x) #endif /** @@ -198,7 +226,7 @@ int drm_addmap(drm_device_t * dev, unsigned int offset, drm_free(map, sizeof(*map), DRM_MEM_MAPS); return -EINVAL; } - map->offset += dev->sg->handle; + map->offset += (unsigned long)dev->sg->virtual; break; case _DRM_CONSISTENT: /* dma_addr_t is 64bit on i386 with CONFIG_HIGHMEM64G, @@ -229,12 +257,11 @@ int drm_addmap(drm_device_t * dev, unsigned int offset, down(&dev->struct_sem); list_add(&list->head, &dev->maplist->head); -#ifdef CONFIG_COMPAT - /* Assign a 32-bit handle for _DRM_SHM mappings */ + /* Assign a 32-bit handle */ /* We do it here so that dev->struct_sem protects the increment */ - if (map->type == _DRM_SHM) - map->offset = map32_handle += PAGE_SIZE; -#endif + list->user_token = HandleID(map->type==_DRM_SHM + ? (unsigned long)map->handle + : map->offset, dev); up(&dev->struct_sem); *map_ptr = map; @@ -251,6 +278,7 @@ int drm_addmap_ioctl(struct inode *inode, struct file *filp, drm_map_t *map_ptr; drm_map_t __user *argp = (void __user *)arg; int err; + unsigned long handle = 0; if (!(filp->f_mode & 3)) return -EACCES; /* Require read/write */ @@ -259,22 +287,29 @@ int drm_addmap_ioctl(struct inode *inode, struct file *filp, return -EFAULT; } - err = drm_addmap( dev, map.offset, map.size, map.type, map.flags, - &map_ptr ); + err = drm_addmap(dev, map.offset, map.size, map.type, map.flags, + &map_ptr); if (err) { return err; } - if (copy_to_user(argp, map_ptr, sizeof(*map_ptr))) - return -EFAULT; - if (map_ptr->type != _DRM_SHM) { - if (copy_to_user(&argp->handle, &map_ptr->offset, - sizeof(map_ptr->offset))) + { + drm_map_list_t *_entry; + list_for_each_entry(_entry, &dev->maplist->head, head) { + if (_entry->map == map_ptr) + handle = _entry->user_token; + } + if (!handle) return -EFAULT; } + + if (copy_to_user(argp, map_ptr, sizeof(*map_ptr))) + return -EFAULT; + if (put_user(handle, &argp->handle)) + return -EFAULT; return 0; -} + } /** @@ -388,7 +423,7 @@ int drm_rmmap_ioctl(struct inode *inode, struct file *filp, drm_map_list_t *r_list = list_entry(list, drm_map_list_t, head); if (r_list->map && - r_list->map->handle == request.handle && + r_list->user_token == (unsigned long) request.handle && r_list->map->flags & _DRM_REMOVABLE) { map = r_list->map; break; @@ -939,7 +974,8 @@ static int drm_addbufs_sg(drm_device_t *dev, drm_buf_desc_t *request) buf->offset = (dma->byte_count + offset); buf->bus_address = agp_offset + offset; - buf->address = (void *)(agp_offset + offset + dev->sg->handle); + buf->address = (void *)(agp_offset + offset + + (unsigned long)dev->sg->virtual); buf->next = NULL; buf->waiting = 0; buf->pending = 0; @@ -1456,6 +1492,7 @@ int drm_mapbufs( struct inode *inode, struct file *filp, || (drm_core_check_feature(dev, DRIVER_FB_DMA) && (dma->flags & _DRM_DMA_USE_FB))) { drm_map_t *map = dev->agp_buffer_map; + unsigned long token = dev->agp_buffer_token; if ( !map ) { retcode = -EINVAL; @@ -1470,7 +1507,7 @@ int drm_mapbufs( struct inode *inode, struct file *filp, virtual = do_mmap( filp, 0, map->size, PROT_READ | PROT_WRITE, MAP_SHARED, - (unsigned long)map->offset ); + token ); #if LINUX_VERSION_CODE <= 0x020402 up( ¤t->mm->mmap_sem ); #else diff --git a/drivers/char/drm/drm_context.c b/drivers/char/drm/drm_context.c index 5af46c9830e..f515567e5b6 100644 --- a/drivers/char/drm/drm_context.c +++ b/drivers/char/drm/drm_context.c @@ -212,6 +212,7 @@ int drm_getsareactx(struct inode *inode, struct file *filp, drm_ctx_priv_map_t __user *argp = (void __user *)arg; drm_ctx_priv_map_t request; drm_map_t *map; + drm_map_list_t *_entry; if (copy_from_user(&request, argp, sizeof(request))) return -EFAULT; @@ -225,7 +226,17 @@ int drm_getsareactx(struct inode *inode, struct file *filp, map = dev->context_sareas[request.ctx_id]; up(&dev->struct_sem); - request.handle = (void *) map->offset; + request.handle = 0; + list_for_each_entry(_entry, &dev->maplist->head,head) { + if (_entry->map == map) { + request.handle = (void *)(unsigned long)_entry->user_token; + break; + } + } + if (request.handle == 0) + return -EINVAL; + + if (copy_to_user(argp, &request, sizeof(request))) return -EFAULT; return 0; @@ -262,7 +273,7 @@ int drm_setsareactx(struct inode *inode, struct file *filp, list_for_each(list, &dev->maplist->head) { r_list = list_entry(list, drm_map_list_t, head); if (r_list->map - && r_list->map->offset == (unsigned long) request.handle) + && r_list->user_token == (unsigned long) request.handle) goto found; } bad: diff --git a/drivers/char/drm/drm_ioctl.c b/drivers/char/drm/drm_ioctl.c index 39afda0ccab..d2ed3ba5aca 100644 --- a/drivers/char/drm/drm_ioctl.c +++ b/drivers/char/drm/drm_ioctl.c @@ -208,7 +208,7 @@ int drm_getmap( struct inode *inode, struct file *filp, map.size = r_list->map->size; map.type = r_list->map->type; map.flags = r_list->map->flags; - map.handle = r_list->map->handle; + map.handle = (void *)(unsigned long) r_list->user_token; map.mtrr = r_list->map->mtrr; up(&dev->struct_sem); diff --git a/drivers/char/drm/drm_proc.c b/drivers/char/drm/drm_proc.c index f4154cc71ab..32d2bb99462 100644 --- a/drivers/char/drm/drm_proc.c +++ b/drivers/char/drm/drm_proc.c @@ -235,13 +235,13 @@ static int drm__vm_info(char *buf, char **start, off_t offset, int request, type = "??"; else type = types[map->type]; - DRM_PROC_PRINT("%4d 0x%08lx 0x%08lx %4.4s 0x%02x 0x%08lx ", + DRM_PROC_PRINT("%4d 0x%08lx 0x%08lx %4.4s 0x%02x 0x%08x ", i, map->offset, map->size, type, map->flags, - (unsigned long)map->handle); + r_list->user_token); if (map->mtrr < 0) { DRM_PROC_PRINT("none\n"); } else { diff --git a/drivers/char/drm/drm_scatter.c b/drivers/char/drm/drm_scatter.c index 54fddb6ea2d..ed267d49bc6 100644 --- a/drivers/char/drm/drm_scatter.c +++ b/drivers/char/drm/drm_scatter.c @@ -61,6 +61,12 @@ void drm_sg_cleanup( drm_sg_mem_t *entry ) DRM_MEM_SGLISTS ); } +#ifdef _LP64 +# define ScatterHandle(x) (unsigned int)((x >> 32) + (x & ((1L << 32) - 1))) +#else +# define ScatterHandle(x) (unsigned int)(x) +#endif + int drm_sg_alloc( struct inode *inode, struct file *filp, unsigned int cmd, unsigned long arg ) { @@ -133,12 +139,13 @@ int drm_sg_alloc( struct inode *inode, struct file *filp, */ memset( entry->virtual, 0, pages << PAGE_SHIFT ); - entry->handle = (unsigned long)entry->virtual; + entry->handle = ScatterHandle((unsigned long)entry->virtual); DRM_DEBUG( "sg alloc handle = %08lx\n", entry->handle ); DRM_DEBUG( "sg alloc virtual = %p\n", entry->virtual ); - for ( i = entry->handle, j = 0 ; j < pages ; i += PAGE_SIZE, j++ ) { + for (i = (unsigned long)entry->virtual, j = 0; j < pages; + i += PAGE_SIZE, j++) { entry->pagelist[j] = vmalloc_to_page((void *)i); if (!entry->pagelist[j]) goto failed; diff --git a/drivers/char/drm/drm_vm.c b/drivers/char/drm/drm_vm.c index 675d2397def..99b5c86f751 100644 --- a/drivers/char/drm/drm_vm.c +++ b/drivers/char/drm/drm_vm.c @@ -73,12 +73,13 @@ static __inline__ struct page *drm_do_vm_nopage(struct vm_area_struct *vma, r_list = list_entry(list, drm_map_list_t, head); map = r_list->map; if (!map) continue; - if (map->offset == VM_OFFSET(vma)) break; + if (r_list->user_token == VM_OFFSET(vma)) + break; } if (map && map->type == _DRM_AGP) { unsigned long offset = address - vma->vm_start; - unsigned long baddr = VM_OFFSET(vma) + offset; + unsigned long baddr = map->offset + offset; struct drm_agp_mem *agpmem; struct page *page; @@ -304,7 +305,7 @@ static __inline__ struct page *drm_do_vm_sg_nopage(struct vm_area_struct *vma, offset = address - vma->vm_start; - map_offset = map->offset - dev->sg->handle; + map_offset = map->offset - (unsigned long)dev->sg->virtual; page_offset = (offset >> PAGE_SHIFT) + (map_offset >> PAGE_SHIFT); page = entry->pagelist[page_offset]; get_page(page); @@ -568,13 +569,12 @@ int drm_mmap(struct file *filp, struct vm_area_struct *vma) for performance, even if the list was a bit longer. */ list_for_each(list, &dev->maplist->head) { - unsigned long off; r_list = list_entry(list, drm_map_list_t, head); map = r_list->map; if (!map) continue; - off = dev->driver->get_map_ofs(map); - if (off == VM_OFFSET(vma)) break; + if (r_list->user_token == VM_OFFSET(vma)) + break; } if (!map || ((map->flags&_DRM_RESTRICTED) && !capable(CAP_SYS_ADMIN))) @@ -613,7 +613,7 @@ int drm_mmap(struct file *filp, struct vm_area_struct *vma) /* fall through to _DRM_FRAME_BUFFER... */ case _DRM_FRAME_BUFFER: case _DRM_REGISTERS: - if (VM_OFFSET(vma) >= __pa(high_memory)) { + if (map->offset >= __pa(high_memory)) { #if defined(__i386__) || defined(__x86_64__) if (boot_cpu_data.x86 > 3 && map->type != _DRM_AGP) { pgprot_val(vma->vm_page_prot) |= _PAGE_PCD; @@ -636,12 +636,12 @@ int drm_mmap(struct file *filp, struct vm_area_struct *vma) offset = dev->driver->get_reg_ofs(dev); #ifdef __sparc__ if (io_remap_pfn_range(DRM_RPR_ARG(vma) vma->vm_start, - (VM_OFFSET(vma) + offset) >> PAGE_SHIFT, + (map->offset + offset) >> PAGE_SHIFT, vma->vm_end - vma->vm_start, vma->vm_page_prot)) #else if (io_remap_pfn_range(vma, vma->vm_start, - (VM_OFFSET(vma) + offset) >> PAGE_SHIFT, + (map->offset + offset) >> PAGE_SHIFT, vma->vm_end - vma->vm_start, vma->vm_page_prot)) #endif @@ -649,7 +649,7 @@ int drm_mmap(struct file *filp, struct vm_area_struct *vma) DRM_DEBUG(" Type = %d; start = 0x%lx, end = 0x%lx," " offset = 0x%lx\n", map->type, - vma->vm_start, vma->vm_end, VM_OFFSET(vma) + offset); + vma->vm_start, vma->vm_end, map->offset + offset); vma->vm_ops = &drm_vm_ops; break; case _DRM_SHM: diff --git a/drivers/char/drm/ffb_drv.c b/drivers/char/drm/ffb_drv.c index ec614fff8f0..1bd0d55ee0f 100644 --- a/drivers/char/drm/ffb_drv.c +++ b/drivers/char/drm/ffb_drv.c @@ -152,14 +152,11 @@ static drm_map_t *ffb_find_map(struct file *filp, unsigned long off) return NULL; list_for_each(list, &dev->maplist->head) { - unsigned long uoff; - r_list = (drm_map_list_t *)list; map = r_list->map; if (!map) continue; - uoff = (map->offset & 0xffffffff); - if (uoff == off) + if (r_list->user_token == off) return map; } diff --git a/drivers/char/drm/i810_dma.c b/drivers/char/drm/i810_dma.c index 0a9ac1f2e21..f9fd5abd774 100644 --- a/drivers/char/drm/i810_dma.c +++ b/drivers/char/drm/i810_dma.c @@ -351,6 +351,7 @@ static int i810_dma_initialize(drm_device_t *dev, DRM_ERROR("can not find mmio map!\n"); return -EINVAL; } + dev->agp_buffer_token = init->buffers_offset; dev->agp_buffer_map = drm_core_findmap(dev, init->buffers_offset); if (!dev->agp_buffer_map) { dev->dev_private = (void *)dev_priv; diff --git a/drivers/char/drm/i830_dma.c b/drivers/char/drm/i830_dma.c index 80d8966397c..697cefccd00 100644 --- a/drivers/char/drm/i830_dma.c +++ b/drivers/char/drm/i830_dma.c @@ -358,6 +358,7 @@ static int i830_dma_initialize(drm_device_t *dev, DRM_ERROR("can not find mmio map!\n"); return -EINVAL; } + dev->agp_buffer_token = init->buffers_offset; dev->agp_buffer_map = drm_core_findmap(dev, init->buffers_offset); if(!dev->agp_buffer_map) { dev->dev_private = (void *)dev_priv; diff --git a/drivers/char/drm/mga_dma.c b/drivers/char/drm/mga_dma.c index 7899e281d06..567b425b784 100644 --- a/drivers/char/drm/mga_dma.c +++ b/drivers/char/drm/mga_dma.c @@ -825,6 +825,7 @@ static int mga_do_init_dma( drm_device_t *dev, drm_mga_init_t *init ) DRM_ERROR("failed to find primary dma region!\n"); return DRM_ERR(EINVAL); } + dev->agp_buffer_token = init->buffers_offset; dev->agp_buffer_map = drm_core_findmap(dev, init->buffers_offset); if (!dev->agp_buffer_map) { DRM_ERROR("failed to find dma buffer region!\n"); diff --git a/drivers/char/drm/mga_drm.h b/drivers/char/drm/mga_drm.h index 2d8aa790379..d20aab3bd57 100644 --- a/drivers/char/drm/mga_drm.h +++ b/drivers/char/drm/mga_drm.h @@ -312,7 +312,7 @@ typedef struct drm_mga_dma_bootstrap { * an IOMMU) is being used for "AGP" textures. */ /*@{*/ - drm_handle_t texture_handle; /**< Handle used to map AGP textures. */ + unsigned long texture_handle; /**< Handle used to map AGP textures. */ uint32_t texture_size; /**< Size of the AGP texture region. */ /*@}*/ diff --git a/drivers/char/drm/mga_ioc32.c b/drivers/char/drm/mga_ioc32.c index bc745cfa209..77d738e75a4 100644 --- a/drivers/char/drm/mga_ioc32.c +++ b/drivers/char/drm/mga_ioc32.c @@ -129,9 +129,76 @@ static int compat_mga_getparam(struct file *file, unsigned int cmd, DRM_IOCTL_MGA_GETPARAM, (unsigned long)getparam); } +typedef struct drm_mga_drm_bootstrap32 { + u32 texture_handle; + u32 texture_size; + u32 primary_size; + u32 secondary_bin_count; + u32 secondary_bin_size; + u32 agp_mode; + u8 agp_size; +} drm_mga_dma_bootstrap32_t; + +static int compat_mga_dma_bootstrap(struct file *file, unsigned int cmd, + unsigned long arg) +{ + drm_mga_dma_bootstrap32_t dma_bootstrap32; + drm_mga_dma_bootstrap_t __user *dma_bootstrap; + int err; + + if (copy_from_user(&dma_bootstrap32, (void __user *)arg, + sizeof(dma_bootstrap32))) + return -EFAULT; + + dma_bootstrap = compat_alloc_user_space(sizeof(*dma_bootstrap)); + if (!access_ok(VERIFY_WRITE, dma_bootstrap, sizeof(*dma_bootstrap)) + || __put_user(dma_bootstrap32.texture_handle, + &dma_bootstrap->texture_handle) + || __put_user(dma_bootstrap32.texture_size, + &dma_bootstrap->texture_size) + || __put_user(dma_bootstrap32.primary_size, + &dma_bootstrap->primary_size) + || __put_user(dma_bootstrap32.secondary_bin_count, + &dma_bootstrap->secondary_bin_count) + || __put_user(dma_bootstrap32.secondary_bin_size, + &dma_bootstrap->secondary_bin_size) + || __put_user(dma_bootstrap32.agp_mode, &dma_bootstrap->agp_mode) + || __put_user(dma_bootstrap32.agp_size, &dma_bootstrap->agp_size)) + return -EFAULT; + + err = drm_ioctl(file->f_dentry->d_inode, file, + DRM_IOCTL_MGA_DMA_BOOTSTRAP, + (unsigned long)dma_bootstrap); + if (err) + return err; + + if (__get_user(dma_bootstrap32.texture_handle, + &dma_bootstrap->texture_handle) + || __get_user(dma_bootstrap32.texture_size, + &dma_bootstrap->texture_size) + || __get_user(dma_bootstrap32.primary_size, + &dma_bootstrap->primary_size) + || __get_user(dma_bootstrap32.secondary_bin_count, + &dma_bootstrap->secondary_bin_count) + || __get_user(dma_bootstrap32.secondary_bin_size, + &dma_bootstrap->secondary_bin_size) + || __get_user(dma_bootstrap32.agp_mode, + &dma_bootstrap->agp_mode) + || __get_user(dma_bootstrap32.agp_size, + &dma_bootstrap->agp_size)) + return -EFAULT; + + if (copy_to_user((void __user *)arg, &dma_bootstrap32, + sizeof(dma_bootstrap32))) + return -EFAULT; + + return 0; +} + drm_ioctl_compat_t *mga_compat_ioctls[] = { [DRM_MGA_INIT] = compat_mga_init, [DRM_MGA_GETPARAM] = compat_mga_getparam, + [DRM_MGA_DMA_BOOTSTRAP] = compat_mga_dma_bootstrap, }; /** diff --git a/drivers/char/drm/r128_cce.c b/drivers/char/drm/r128_cce.c index 08ed8d01d9d..895152206b3 100644 --- a/drivers/char/drm/r128_cce.c +++ b/drivers/char/drm/r128_cce.c @@ -326,7 +326,8 @@ static void r128_cce_init_ring_buffer( drm_device_t *dev, ring_start = dev_priv->cce_ring->offset - dev->agp->base; else #endif - ring_start = dev_priv->cce_ring->offset - dev->sg->handle; + ring_start = dev_priv->cce_ring->offset - + (unsigned long)dev->sg->virtual; R128_WRITE( R128_PM4_BUFFER_OFFSET, ring_start | R128_AGP_OFFSET ); @@ -487,6 +488,7 @@ static int r128_do_init_cce( drm_device_t *dev, drm_r128_init_t *init ) r128_do_cleanup_cce( dev ); return DRM_ERR(EINVAL); } + dev->agp_buffer_token = init->buffers_offset; dev->agp_buffer_map = drm_core_findmap(dev, init->buffers_offset); if(!dev->agp_buffer_map) { DRM_ERROR("could not find dma buffer region!\n"); @@ -537,7 +539,7 @@ static int r128_do_init_cce( drm_device_t *dev, drm_r128_init_t *init ) dev_priv->cce_buffers_offset = dev->agp->base; else #endif - dev_priv->cce_buffers_offset = dev->sg->handle; + dev_priv->cce_buffers_offset = (unsigned long)dev->sg->virtual; dev_priv->ring.start = (u32 *)dev_priv->cce_ring->handle; dev_priv->ring.end = ((u32 *)dev_priv->cce_ring->handle diff --git a/drivers/char/drm/radeon_cp.c b/drivers/char/drm/radeon_cp.c index 8255cc6fdc2..f24a27c4dd1 100644 --- a/drivers/char/drm/radeon_cp.c +++ b/drivers/char/drm/radeon_cp.c @@ -1407,6 +1407,7 @@ static int radeon_do_init_cp( drm_device_t *dev, drm_radeon_init_t *init ) radeon_do_cleanup_cp(dev); return DRM_ERR(EINVAL); } + dev->agp_buffer_token = init->buffers_offset; dev->agp_buffer_map = drm_core_findmap(dev, init->buffers_offset); if(!dev->agp_buffer_map) { DRM_ERROR("could not find dma buffer region!\n"); -- cgit v1.2.3 From db215327c62c2db533afb322761fa04ea6244164 Mon Sep 17 00:00:00 2001 From: Dave Airlie Date: Fri, 5 Aug 2005 22:13:15 +1000 Subject: drm: switch drm_handle_t to unsigned int This converts the drm_handle_t to unsigned int. This is currently safe to do as we don't pass these across the kernel/user boundary, but userspace does use these, but no-one builds userspace against the kernel headers at present so it is okay to switch over the kernel copy of drm.h at this point. (The CVS tree will switch over soon in sync with some Mesa changes) From: Egbert Eich Signed-off-by: Dave Airlie --- drivers/char/drm/drm.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/char/drm/drm.h b/drivers/char/drm/drm.h index 3a4745f76cf..fc6598a81ac 100644 --- a/drivers/char/drm/drm.h +++ b/drivers/char/drm/drm.h @@ -98,7 +98,7 @@ #define _DRM_LOCKING_CONTEXT(lock) ((lock) & ~(_DRM_LOCK_HELD|_DRM_LOCK_CONT)) -typedef unsigned long drm_handle_t; +typedef unsigned int drm_handle_t; typedef unsigned int drm_context_t; typedef unsigned int drm_drawable_t; typedef unsigned int drm_magic_t; -- cgit v1.2.3 From 1fad99499afdd2730adb1d53413b91580b1f0662 Mon Sep 17 00:00:00 2001 From: Dave Airlie Date: Fri, 5 Aug 2005 22:40:34 +1000 Subject: drm: remove the gamma driver The gamma driver has been broken for quite a while, it doesn't build, we don't have a userspace, mine is in Ireland etc... Signed-off-by: Dave Airlie --- drivers/char/drm/Kconfig | 7 - drivers/char/drm/Makefile | 2 - drivers/char/drm/drm_pciids.h | 4 - drivers/char/drm/gamma_context.h | 492 -------------------- drivers/char/drm/gamma_dma.c | 946 --------------------------------------- drivers/char/drm/gamma_drm.h | 90 ---- drivers/char/drm/gamma_drv.c | 59 --- drivers/char/drm/gamma_drv.h | 147 ------ drivers/char/drm/gamma_lists.h | 215 --------- drivers/char/drm/gamma_lock.h | 140 ------ drivers/char/drm/gamma_old_dma.h | 313 ------------- 11 files changed, 2415 deletions(-) delete mode 100644 drivers/char/drm/gamma_context.h delete mode 100644 drivers/char/drm/gamma_dma.c delete mode 100644 drivers/char/drm/gamma_drm.h delete mode 100644 drivers/char/drm/gamma_drv.c delete mode 100644 drivers/char/drm/gamma_drv.h delete mode 100644 drivers/char/drm/gamma_lists.h delete mode 100644 drivers/char/drm/gamma_lock.h delete mode 100644 drivers/char/drm/gamma_old_dma.h diff --git a/drivers/char/drm/Kconfig b/drivers/char/drm/Kconfig index d6c50312aec..f31b9706ef6 100644 --- a/drivers/char/drm/Kconfig +++ b/drivers/char/drm/Kconfig @@ -23,13 +23,6 @@ config DRM_TDFX Choose this option if you have a 3dfx Banshee or Voodoo3 (or later), graphics card. If M is selected, the module will be called tdfx. -config DRM_GAMMA - tristate "3dlabs GMX 2000" - depends on DRM && BROKEN - help - This is the old gamma driver, please tell me if it might actually - work. - config DRM_R128 tristate "ATI Rage 128" depends on DRM && PCI diff --git a/drivers/char/drm/Makefile b/drivers/char/drm/Makefile index ddd941045b1..3f0cf8e9cc5 100644 --- a/drivers/char/drm/Makefile +++ b/drivers/char/drm/Makefile @@ -8,7 +8,6 @@ drm-objs := drm_auth.o drm_bufs.o drm_context.o drm_dma.o drm_drawable.o \ drm_agpsupport.o drm_scatter.o ati_pcigart.o drm_pci.o \ drm_sysfs.o -gamma-objs := gamma_drv.o gamma_dma.o tdfx-objs := tdfx_drv.o r128-objs := r128_drv.o r128_cce.o r128_state.o r128_irq.o mga-objs := mga_drv.o mga_dma.o mga_state.o mga_warp.o mga_irq.o @@ -29,7 +28,6 @@ i915-objs += i915_ioc32.o endif obj-$(CONFIG_DRM) += drm.o -obj-$(CONFIG_DRM_GAMMA) += gamma.o obj-$(CONFIG_DRM_TDFX) += tdfx.o obj-$(CONFIG_DRM_R128) += r128.o obj-$(CONFIG_DRM_RADEON)+= radeon.o diff --git a/drivers/char/drm/drm_pciids.h b/drivers/char/drm/drm_pciids.h index 4f317ec092e..8e264f9c1a1 100644 --- a/drivers/char/drm/drm_pciids.h +++ b/drivers/char/drm/drm_pciids.h @@ -182,10 +182,6 @@ {0x8086, 0x2572, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, \ {0, 0, 0} -#define gamma_PCI_IDS \ - {0x3d3d, 0x0008, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, \ - {0, 0, 0} - #define savage_PCI_IDS \ {0x5333, 0x8a22, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, \ {0x5333, 0x8a23, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, \ diff --git a/drivers/char/drm/gamma_context.h b/drivers/char/drm/gamma_context.h deleted file mode 100644 index d11b507f87e..00000000000 --- a/drivers/char/drm/gamma_context.h +++ /dev/null @@ -1,492 +0,0 @@ -/* drm_context.h -- IOCTLs for generic contexts -*- linux-c -*- - * Created: Fri Nov 24 18:31:37 2000 by gareth@valinux.com - * - * Copyright 1999, 2000 Precision Insight, Inc., Cedar Park, Texas. - * Copyright 2000 VA Linux Systems, Inc., Sunnyvale, California. - * All Rights Reserved. - * - * Permission is hereby granted, free of charge, to any person obtaining a - * copy of this software and associated documentation files (the "Software"), - * to deal in the Software without restriction, including without limitation - * the rights to use, copy, modify, merge, publish, distribute, sublicense, - * and/or sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following conditions: - * - * The above copyright notice and this permission notice (including the next - * paragraph) shall be included in all copies or substantial portions of the - * Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR - * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, - * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL - * VA LINUX SYSTEMS AND/OR ITS SUPPLIERS BE LIABLE FOR ANY CLAIM, DAMAGES OR - * OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, - * ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. - * - * Authors: - * Rickard E. (Rik) Faith - * Gareth Hughes - * ChangeLog: - * 2001-11-16 Torsten Duwe - * added context constructor/destructor hooks, - * needed by SiS driver's memory management. - */ - -/* ================================================================ - * Old-style context support -- only used by gamma. - */ - - -/* The drm_read and drm_write_string code (especially that which manages - the circular buffer), is based on Alessandro Rubini's LINUX DEVICE - DRIVERS (Cambridge: O'Reilly, 1998), pages 111-113. */ - -ssize_t gamma_fops_read(struct file *filp, char __user *buf, size_t count, loff_t *off) -{ - drm_file_t *priv = filp->private_data; - drm_device_t *dev = priv->dev; - int left; - int avail; - int send; - int cur; - - DRM_DEBUG("%p, %p\n", dev->buf_rp, dev->buf_wp); - - while (dev->buf_rp == dev->buf_wp) { - DRM_DEBUG(" sleeping\n"); - if (filp->f_flags & O_NONBLOCK) { - return -EAGAIN; - } - interruptible_sleep_on(&dev->buf_readers); - if (signal_pending(current)) { - DRM_DEBUG(" interrupted\n"); - return -ERESTARTSYS; - } - DRM_DEBUG(" awake\n"); - } - - left = (dev->buf_rp + DRM_BSZ - dev->buf_wp) % DRM_BSZ; - avail = DRM_BSZ - left; - send = DRM_MIN(avail, count); - - while (send) { - if (dev->buf_wp > dev->buf_rp) { - cur = DRM_MIN(send, dev->buf_wp - dev->buf_rp); - } else { - cur = DRM_MIN(send, dev->buf_end - dev->buf_rp); - } - if (copy_to_user(buf, dev->buf_rp, cur)) - return -EFAULT; - dev->buf_rp += cur; - if (dev->buf_rp == dev->buf_end) dev->buf_rp = dev->buf; - send -= cur; - } - - wake_up_interruptible(&dev->buf_writers); - return DRM_MIN(avail, count); -} - - -/* In an incredibly convoluted setup, the kernel module actually calls - * back into the X server to perform context switches on behalf of the - * 3d clients. - */ -int DRM(write_string)(drm_device_t *dev, const char *s) -{ - int left = (dev->buf_rp + DRM_BSZ - dev->buf_wp) % DRM_BSZ; - int send = strlen(s); - int count; - - DRM_DEBUG("%d left, %d to send (%p, %p)\n", - left, send, dev->buf_rp, dev->buf_wp); - - if (left == 1 || dev->buf_wp != dev->buf_rp) { - DRM_ERROR("Buffer not empty (%d left, wp = %p, rp = %p)\n", - left, - dev->buf_wp, - dev->buf_rp); - } - - while (send) { - if (dev->buf_wp >= dev->buf_rp) { - count = DRM_MIN(send, dev->buf_end - dev->buf_wp); - if (count == left) --count; /* Leave a hole */ - } else { - count = DRM_MIN(send, dev->buf_rp - dev->buf_wp - 1); - } - strncpy(dev->buf_wp, s, count); - dev->buf_wp += count; - if (dev->buf_wp == dev->buf_end) dev->buf_wp = dev->buf; - send -= count; - } - - if (dev->buf_async) kill_fasync(&dev->buf_async, SIGIO, POLL_IN); - - DRM_DEBUG("waking\n"); - wake_up_interruptible(&dev->buf_readers); - return 0; -} - -unsigned int gamma_fops_poll(struct file *filp, struct poll_table_struct *wait) -{ - drm_file_t *priv = filp->private_data; - drm_device_t *dev = priv->dev; - - poll_wait(filp, &dev->buf_readers, wait); - if (dev->buf_wp != dev->buf_rp) return POLLIN | POLLRDNORM; - return 0; -} - -int DRM(context_switch)(drm_device_t *dev, int old, int new) -{ - char buf[64]; - drm_queue_t *q; - - if (test_and_set_bit(0, &dev->context_flag)) { - DRM_ERROR("Reentering -- FIXME\n"); - return -EBUSY; - } - - DRM_DEBUG("Context switch from %d to %d\n", old, new); - - if (new >= dev->queue_count) { - clear_bit(0, &dev->context_flag); - return -EINVAL; - } - - if (new == dev->last_context) { - clear_bit(0, &dev->context_flag); - return 0; - } - - q = dev->queuelist[new]; - atomic_inc(&q->use_count); - if (atomic_read(&q->use_count) == 1) { - atomic_dec(&q->use_count); - clear_bit(0, &dev->context_flag); - return -EINVAL; - } - - /* This causes the X server to wake up & do a bunch of hardware - * interaction to actually effect the context switch. - */ - sprintf(buf, "C %d %d\n", old, new); - DRM(write_string)(dev, buf); - - atomic_dec(&q->use_count); - - return 0; -} - -int DRM(context_switch_complete)(drm_device_t *dev, int new) -{ - drm_device_dma_t *dma = dev->dma; - - dev->last_context = new; /* PRE/POST: This is the _only_ writer. */ - dev->last_switch = jiffies; - - if (!_DRM_LOCK_IS_HELD(dev->lock.hw_lock->lock)) { - DRM_ERROR("Lock isn't held after context switch\n"); - } - - if (!dma || !(dma->next_buffer && dma->next_buffer->while_locked)) { - if (DRM(lock_free)(dev, &dev->lock.hw_lock->lock, - DRM_KERNEL_CONTEXT)) { - DRM_ERROR("Cannot free lock\n"); - } - } - - clear_bit(0, &dev->context_flag); - wake_up_interruptible(&dev->context_wait); - - return 0; -} - -static int DRM(init_queue)(drm_device_t *dev, drm_queue_t *q, drm_ctx_t *ctx) -{ - DRM_DEBUG("\n"); - - if (atomic_read(&q->use_count) != 1 - || atomic_read(&q->finalization) - || atomic_read(&q->block_count)) { - DRM_ERROR("New queue is already in use: u%d f%d b%d\n", - atomic_read(&q->use_count), - atomic_read(&q->finalization), - atomic_read(&q->block_count)); - } - - atomic_set(&q->finalization, 0); - atomic_set(&q->block_count, 0); - atomic_set(&q->block_read, 0); - atomic_set(&q->block_write, 0); - atomic_set(&q->total_queued, 0); - atomic_set(&q->total_flushed, 0); - atomic_set(&q->total_locks, 0); - - init_waitqueue_head(&q->write_queue); - init_waitqueue_head(&q->read_queue); - init_waitqueue_head(&q->flush_queue); - - q->flags = ctx->flags; - - DRM(waitlist_create)(&q->waitlist, dev->dma->buf_count); - - return 0; -} - - -/* drm_alloc_queue: -PRE: 1) dev->queuelist[0..dev->queue_count] is allocated and will not - disappear (so all deallocation must be done after IOCTLs are off) - 2) dev->queue_count < dev->queue_slots - 3) dev->queuelist[i].use_count == 0 and - dev->queuelist[i].finalization == 0 if i not in use -POST: 1) dev->queuelist[i].use_count == 1 - 2) dev->queue_count < dev->queue_slots */ - -static int DRM(alloc_queue)(drm_device_t *dev) -{ - int i; - drm_queue_t *queue; - int oldslots; - int newslots; - /* Check for a free queue */ - for (i = 0; i < dev->queue_count; i++) { - atomic_inc(&dev->queuelist[i]->use_count); - if (atomic_read(&dev->queuelist[i]->use_count) == 1 - && !atomic_read(&dev->queuelist[i]->finalization)) { - DRM_DEBUG("%d (free)\n", i); - return i; - } - atomic_dec(&dev->queuelist[i]->use_count); - } - /* Allocate a new queue */ - down(&dev->struct_sem); - - queue = DRM(alloc)(sizeof(*queue), DRM_MEM_QUEUES); - memset(queue, 0, sizeof(*queue)); - atomic_set(&queue->use_count, 1); - - ++dev->queue_count; - if (dev->queue_count >= dev->queue_slots) { - oldslots = dev->queue_slots * sizeof(*dev->queuelist); - if (!dev->queue_slots) dev->queue_slots = 1; - dev->queue_slots *= 2; - newslots = dev->queue_slots * sizeof(*dev->queuelist); - - dev->queuelist = DRM(realloc)(dev->queuelist, - oldslots, - newslots, - DRM_MEM_QUEUES); - if (!dev->queuelist) { - up(&dev->struct_sem); - DRM_DEBUG("out of memory\n"); - return -ENOMEM; - } - } - dev->queuelist[dev->queue_count-1] = queue; - - up(&dev->struct_sem); - DRM_DEBUG("%d (new)\n", dev->queue_count - 1); - return dev->queue_count - 1; -} - -int DRM(resctx)(struct inode *inode, struct file *filp, - unsigned int cmd, unsigned long arg) -{ - drm_ctx_res_t __user *argp = (void __user *)arg; - drm_ctx_res_t res; - drm_ctx_t ctx; - int i; - - DRM_DEBUG("%d\n", DRM_RESERVED_CONTEXTS); - if (copy_from_user(&res, argp, sizeof(res))) - return -EFAULT; - if (res.count >= DRM_RESERVED_CONTEXTS) { - memset(&ctx, 0, sizeof(ctx)); - for (i = 0; i < DRM_RESERVED_CONTEXTS; i++) { - ctx.handle = i; - if (copy_to_user(&res.contexts[i], - &i, - sizeof(i))) - return -EFAULT; - } - } - res.count = DRM_RESERVED_CONTEXTS; - if (copy_to_user(argp, &res, sizeof(res))) - return -EFAULT; - return 0; -} - -int DRM(addctx)(struct inode *inode, struct file *filp, - unsigned int cmd, unsigned long arg) -{ - drm_file_t *priv = filp->private_data; - drm_device_t *dev = priv->dev; - drm_ctx_t ctx; - drm_ctx_t __user *argp = (void __user *)arg; - - if (copy_from_user(&ctx, argp, sizeof(ctx))) - return -EFAULT; - if ((ctx.handle = DRM(alloc_queue)(dev)) == DRM_KERNEL_CONTEXT) { - /* Init kernel's context and get a new one. */ - DRM(init_queue)(dev, dev->queuelist[ctx.handle], &ctx); - ctx.handle = DRM(alloc_queue)(dev); - } - DRM(init_queue)(dev, dev->queuelist[ctx.handle], &ctx); - DRM_DEBUG("%d\n", ctx.handle); - if (copy_to_user(argp, &ctx, sizeof(ctx))) - return -EFAULT; - return 0; -} - -int DRM(modctx)(struct inode *inode, struct file *filp, - unsigned int cmd, unsigned long arg) -{ - drm_file_t *priv = filp->private_data; - drm_device_t *dev = priv->dev; - drm_ctx_t ctx; - drm_queue_t *q; - - if (copy_from_user(&ctx, (drm_ctx_t __user *)arg, sizeof(ctx))) - return -EFAULT; - - DRM_DEBUG("%d\n", ctx.handle); - - if (ctx.handle < 0 || ctx.handle >= dev->queue_count) return -EINVAL; - q = dev->queuelist[ctx.handle]; - - atomic_inc(&q->use_count); - if (atomic_read(&q->use_count) == 1) { - /* No longer in use */ - atomic_dec(&q->use_count); - return -EINVAL; - } - - if (DRM_BUFCOUNT(&q->waitlist)) { - atomic_dec(&q->use_count); - return -EBUSY; - } - - q->flags = ctx.flags; - - atomic_dec(&q->use_count); - return 0; -} - -int DRM(getctx)(struct inode *inode, struct file *filp, - unsigned int cmd, unsigned long arg) -{ - drm_file_t *priv = filp->private_data; - drm_device_t *dev = priv->dev; - drm_ctx_t __user *argp = (void __user *)arg; - drm_ctx_t ctx; - drm_queue_t *q; - - if (copy_from_user(&ctx, argp, sizeof(ctx))) - return -EFAULT; - - DRM_DEBUG("%d\n", ctx.handle); - - if (ctx.handle >= dev->queue_count) return -EINVAL; - q = dev->queuelist[ctx.handle]; - - atomic_inc(&q->use_count); - if (atomic_read(&q->use_count) == 1) { - /* No longer in use */ - atomic_dec(&q->use_count); - return -EINVAL; - } - - ctx.flags = q->flags; - atomic_dec(&q->use_count); - - if (copy_to_user(argp, &ctx, sizeof(ctx))) - return -EFAULT; - - return 0; -} - -int DRM(switchctx)(struct inode *inode, struct file *filp, - unsigned int cmd, unsigned long arg) -{ - drm_file_t *priv = filp->private_data; - drm_device_t *dev = priv->dev; - drm_ctx_t ctx; - - if (copy_from_user(&ctx, (drm_ctx_t __user *)arg, sizeof(ctx))) - return -EFAULT; - DRM_DEBUG("%d\n", ctx.handle); - return DRM(context_switch)(dev, dev->last_context, ctx.handle); -} - -int DRM(newctx)(struct inode *inode, struct file *filp, - unsigned int cmd, unsigned long arg) -{ - drm_file_t *priv = filp->private_data; - drm_device_t *dev = priv->dev; - drm_ctx_t ctx; - - if (copy_from_user(&ctx, (drm_ctx_t __user *)arg, sizeof(ctx))) - return -EFAULT; - DRM_DEBUG("%d\n", ctx.handle); - DRM(context_switch_complete)(dev, ctx.handle); - - return 0; -} - -int DRM(rmctx)(struct inode *inode, struct file *filp, - unsigned int cmd, unsigned long arg) -{ - drm_file_t *priv = filp->private_data; - drm_device_t *dev = priv->dev; - drm_ctx_t ctx; - drm_queue_t *q; - drm_buf_t *buf; - - if (copy_from_user(&ctx, (drm_ctx_t __user *)arg, sizeof(ctx))) - return -EFAULT; - DRM_DEBUG("%d\n", ctx.handle); - - if (ctx.handle >= dev->queue_count) return -EINVAL; - q = dev->queuelist[ctx.handle]; - - atomic_inc(&q->use_count); - if (atomic_read(&q->use_count) == 1) { - /* No longer in use */ - atomic_dec(&q->use_count); - return -EINVAL; - } - - atomic_inc(&q->finalization); /* Mark queue in finalization state */ - atomic_sub(2, &q->use_count); /* Mark queue as unused (pending - finalization) */ - - while (test_and_set_bit(0, &dev->interrupt_flag)) { - schedule(); - if (signal_pending(current)) { - clear_bit(0, &dev->interrupt_flag); - return -EINTR; - } - } - /* Remove queued buffers */ - while ((buf = DRM(waitlist_get)(&q->waitlist))) { - DRM(free_buffer)(dev, buf); - } - clear_bit(0, &dev->interrupt_flag); - - /* Wakeup blocked processes */ - wake_up_interruptible(&q->read_queue); - wake_up_interruptible(&q->write_queue); - wake_up_interruptible(&q->flush_queue); - - /* Finalization over. Queue is made - available when both use_count and - finalization become 0, which won't - happen until all the waiting processes - stop waiting. */ - atomic_dec(&q->finalization); - return 0; -} - diff --git a/drivers/char/drm/gamma_dma.c b/drivers/char/drm/gamma_dma.c deleted file mode 100644 index e486fb8d31e..00000000000 --- a/drivers/char/drm/gamma_dma.c +++ /dev/null @@ -1,946 +0,0 @@ -/* gamma_dma.c -- DMA support for GMX 2000 -*- linux-c -*- - * Created: Fri Mar 19 14:30:16 1999 by faith@precisioninsight.com - * - * Copyright 1999 Precision Insight, Inc., Cedar Park, Texas. - * Copyright 2000 VA Linux Systems, Inc., Sunnyvale, California. - * All Rights Reserved. - * - * Permission is hereby granted, free of charge, to any person obtaining a - * copy of this software and associated documentation files (the "Software"), - * to deal in the Software without restriction, including without limitation - * the rights to use, copy, modify, merge, publish, distribute, sublicense, - * and/or sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following conditions: - * - * The above copyright notice and this permission notice (including the next - * paragraph) shall be included in all copies or substantial portions of the - * Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR - * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, - * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL - * PRECISION INSIGHT AND/OR ITS SUPPLIERS BE LIABLE FOR ANY CLAIM, DAMAGES OR - * OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, - * ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER - * DEALINGS IN THE SOFTWARE. - * - * Authors: - * Rickard E. (Rik) Faith - * - */ - -#include "gamma.h" -#include "drmP.h" -#include "drm.h" -#include "gamma_drm.h" -#include "gamma_drv.h" - -#include /* For task queue support */ -#include - -static inline void gamma_dma_dispatch(drm_device_t *dev, unsigned long address, - unsigned long length) -{ - drm_gamma_private_t *dev_priv = - (drm_gamma_private_t *)dev->dev_private; - mb(); - while ( GAMMA_READ(GAMMA_INFIFOSPACE) < 2) - cpu_relax(); - - GAMMA_WRITE(GAMMA_DMAADDRESS, address); - - while (GAMMA_READ(GAMMA_GCOMMANDSTATUS) != 4) - cpu_relax(); - - GAMMA_WRITE(GAMMA_DMACOUNT, length / 4); -} - -void gamma_dma_quiescent_single(drm_device_t *dev) -{ - drm_gamma_private_t *dev_priv = - (drm_gamma_private_t *)dev->dev_private; - while (GAMMA_READ(GAMMA_DMACOUNT)) - cpu_relax(); - - while (GAMMA_READ(GAMMA_INFIFOSPACE) < 2) - cpu_relax(); - - GAMMA_WRITE(GAMMA_FILTERMODE, 1 << 10); - GAMMA_WRITE(GAMMA_SYNC, 0); - - do { - while (!GAMMA_READ(GAMMA_OUTFIFOWORDS)) - cpu_relax(); - } while (GAMMA_READ(GAMMA_OUTPUTFIFO) != GAMMA_SYNC_TAG); -} - -void gamma_dma_quiescent_dual(drm_device_t *dev) -{ - drm_gamma_private_t *dev_priv = - (drm_gamma_private_t *)dev->dev_private; - while (GAMMA_READ(GAMMA_DMACOUNT)) - cpu_relax(); - - while (GAMMA_READ(GAMMA_INFIFOSPACE) < 3) - cpu_relax(); - - GAMMA_WRITE(GAMMA_BROADCASTMASK, 3); - GAMMA_WRITE(GAMMA_FILTERMODE, 1 << 10); - GAMMA_WRITE(GAMMA_SYNC, 0); - - /* Read from first MX */ - do { - while (!GAMMA_READ(GAMMA_OUTFIFOWORDS)) - cpu_relax(); - } while (GAMMA_READ(GAMMA_OUTPUTFIFO) != GAMMA_SYNC_TAG); - - /* Read from second MX */ - do { - while (!GAMMA_READ(GAMMA_OUTFIFOWORDS + 0x10000)) - cpu_relax(); - } while (GAMMA_READ(GAMMA_OUTPUTFIFO + 0x10000) != GAMMA_SYNC_TAG); -} - -void gamma_dma_ready(drm_device_t *dev) -{ - drm_gamma_private_t *dev_priv = - (drm_gamma_private_t *)dev->dev_private; - while (GAMMA_READ(GAMMA_DMACOUNT)) - cpu_relax(); -} - -static inline int gamma_dma_is_ready(drm_device_t *dev) -{ - drm_gamma_private_t *dev_priv = - (drm_gamma_private_t *)dev->dev_private; - return (!GAMMA_READ(GAMMA_DMACOUNT)); -} - -irqreturn_t gamma_driver_irq_handler( DRM_IRQ_ARGS ) -{ - drm_device_t *dev = (drm_device_t *)arg; - drm_device_dma_t *dma = dev->dma; - drm_gamma_private_t *dev_priv = - (drm_gamma_private_t *)dev->dev_private; - - /* FIXME: should check whether we're actually interested in the interrupt? */ - atomic_inc(&dev->counts[6]); /* _DRM_STAT_IRQ */ - - while (GAMMA_READ(GAMMA_INFIFOSPACE) < 3) - cpu_relax(); - - GAMMA_WRITE(GAMMA_GDELAYTIMER, 0xc350/2); /* 0x05S */ - GAMMA_WRITE(GAMMA_GCOMMANDINTFLAGS, 8); - GAMMA_WRITE(GAMMA_GINTFLAGS, 0x2001); - if (gamma_dma_is_ready(dev)) { - /* Free previous buffer */ - if (test_and_set_bit(0, &dev->dma_flag)) - return IRQ_HANDLED; - if (dma->this_buffer) { - gamma_free_buffer(dev, dma->this_buffer); - dma->this_buffer = NULL; - } - clear_bit(0, &dev->dma_flag); - - /* Dispatch new buffer */ - schedule_work(&dev->work); - } - return IRQ_HANDLED; -} - -/* Only called by gamma_dma_schedule. */ -static int gamma_do_dma(drm_device_t *dev, int locked) -{ - unsigned long address; - unsigned long length; - drm_buf_t *buf; - int retcode = 0; - drm_device_dma_t *dma = dev->dma; - - if (test_and_set_bit(0, &dev->dma_flag)) return -EBUSY; - - - if (!dma->next_buffer) { - DRM_ERROR("No next_buffer\n"); - clear_bit(0, &dev->dma_flag); - return -EINVAL; - } - - buf = dma->next_buffer; - /* WE NOW ARE ON LOGICAL PAGES!! - using page table setup in dma_init */ - /* So we pass the buffer index value into the physical page offset */ - address = buf->idx << 12; - length = buf->used; - - DRM_DEBUG("context %d, buffer %d (%ld bytes)\n", - buf->context, buf->idx, length); - - if (buf->list == DRM_LIST_RECLAIM) { - gamma_clear_next_buffer(dev); - gamma_free_buffer(dev, buf); - clear_bit(0, &dev->dma_flag); - return -EINVAL; - } - - if (!length) { - DRM_ERROR("0 length buffer\n"); - gamma_clear_next_buffer(dev); - gamma_free_buffer(dev, buf); - clear_bit(0, &dev->dma_flag); - return 0; - } - - if (!gamma_dma_is_ready(dev)) { - clear_bit(0, &dev->dma_flag); - return -EBUSY; - } - - if (buf->while_locked) { - if (!_DRM_LOCK_IS_HELD(dev->lock.hw_lock->lock)) { - DRM_ERROR("Dispatching buffer %d from pid %d" - " \"while locked\", but no lock held\n", - buf->idx, current->pid); - } - } else { - if (!locked && !gamma_lock_take(&dev->lock.hw_lock->lock, - DRM_KERNEL_CONTEXT)) { - clear_bit(0, &dev->dma_flag); - return -EBUSY; - } - } - - if (dev->last_context != buf->context - && !(dev->queuelist[buf->context]->flags - & _DRM_CONTEXT_PRESERVED)) { - /* PRE: dev->last_context != buf->context */ - if (DRM(context_switch)(dev, dev->last_context, - buf->context)) { - DRM(clear_next_buffer)(dev); - DRM(free_buffer)(dev, buf); - } - retcode = -EBUSY; - goto cleanup; - - /* POST: we will wait for the context - switch and will dispatch on a later call - when dev->last_context == buf->context. - NOTE WE HOLD THE LOCK THROUGHOUT THIS - TIME! */ - } - - gamma_clear_next_buffer(dev); - buf->pending = 1; - buf->waiting = 0; - buf->list = DRM_LIST_PEND; - - /* WE NOW ARE ON LOGICAL PAGES!!! - overriding address */ - address = buf->idx << 12; - - gamma_dma_dispatch(dev, address, length); - gamma_free_buffer(dev, dma->this_buffer); - dma->this_buffer = buf; - - atomic_inc(&dev->counts[7]); /* _DRM_STAT_DMA */ - atomic_add(length, &dev->counts[8]); /* _DRM_STAT_PRIMARY */ - - if (!buf->while_locked && !dev->context_flag && !locked) { - if (gamma_lock_free(dev, &dev->lock.hw_lock->lock, - DRM_KERNEL_CONTEXT)) { - DRM_ERROR("\n"); - } - } -cleanup: - - clear_bit(0, &dev->dma_flag); - - - return retcode; -} - -static void gamma_dma_timer_bh(unsigned long dev) -{ - gamma_dma_schedule((drm_device_t *)dev, 0); -} - -void gamma_irq_immediate_bh(void *dev) -{ - gamma_dma_schedule(dev, 0); -} - -int gamma_dma_schedule(drm_device_t *dev, int locked) -{ - int next; - drm_queue_t *q; - drm_buf_t *buf; - int retcode = 0; - int processed = 0; - int missed; - int expire = 20; - drm_device_dma_t *dma = dev->dma; - - if (test_and_set_bit(0, &dev->interrupt_flag)) { - /* Not reentrant */ - atomic_inc(&dev->counts[10]); /* _DRM_STAT_MISSED */ - return -EBUSY; - } - missed = atomic_read(&dev->counts[10]); - - -again: - if (dev->context_flag) { - clear_bit(0, &dev->interrupt_flag); - return -EBUSY; - } - if (dma->next_buffer) { - /* Unsent buffer that was previously - selected, but that couldn't be sent - because the lock could not be obtained - or the DMA engine wasn't ready. Try - again. */ - if (!(retcode = gamma_do_dma(dev, locked))) ++processed; - } else { - do { - next = gamma_select_queue(dev, gamma_dma_timer_bh); - if (next >= 0) { - q = dev->queuelist[next]; - buf = gamma_waitlist_get(&q->waitlist); - dma->next_buffer = buf; - dma->next_queue = q; - if (buf && buf->list == DRM_LIST_RECLAIM) { - gamma_clear_next_buffer(dev); - gamma_free_buffer(dev, buf); - } - } - } while (next >= 0 && !dma->next_buffer); - if (dma->next_buffer) { - if (!(retcode = gamma_do_dma(dev, locked))) { - ++processed; - } - } - } - - if (--expire) { - if (missed != atomic_read(&dev->counts[10])) { - if (gamma_dma_is_ready(dev)) goto again; - } - if (processed && gamma_dma_is_ready(dev)) { - processed = 0; - goto again; - } - } - - clear_bit(0, &dev->interrupt_flag); - - return retcode; -} - -static int gamma_dma_priority(struct file *filp, - drm_device_t *dev, drm_dma_t *d) -{ - unsigned long address; - unsigned long length; - int must_free = 0; - int retcode = 0; - int i; - int idx; - drm_buf_t *buf; - drm_buf_t *last_buf = NULL; - drm_device_dma_t *dma = dev->dma; - int *send_indices = NULL; - int *send_sizes = NULL; - - DECLARE_WAITQUEUE(entry, current); - - /* Turn off interrupt handling */ - while (test_and_set_bit(0, &dev->interrupt_flag)) { - schedule(); - if (signal_pending(current)) return -EINTR; - } - if (!(d->flags & _DRM_DMA_WHILE_LOCKED)) { - while (!gamma_lock_take(&dev->lock.hw_lock->lock, - DRM_KERNEL_CONTEXT)) { - schedule(); - if (signal_pending(current)) { - clear_bit(0, &dev->interrupt_flag); - return -EINTR; - } - } - ++must_free; - } - - send_indices = DRM(alloc)(d->send_count * sizeof(*send_indices), - DRM_MEM_DRIVER); - if (send_indices == NULL) - return -ENOMEM; - if (copy_from_user(send_indices, d->send_indices, - d->send_count * sizeof(*send_indices))) { - retcode = -EFAULT; - goto cleanup; - } - - send_sizes = DRM(alloc)(d->send_count * sizeof(*send_sizes), - DRM_MEM_DRIVER); - if (send_sizes == NULL) - return -ENOMEM; - if (copy_from_user(send_sizes, d->send_sizes, - d->send_count * sizeof(*send_sizes))) { - retcode = -EFAULT; - goto cleanup; - } - - for (i = 0; i < d->send_count; i++) { - idx = send_indices[i]; - if (idx < 0 || idx >= dma->buf_count) { - DRM_ERROR("Index %d (of %d max)\n", - send_indices[i], dma->buf_count - 1); - continue; - } - buf = dma->buflist[ idx ]; - if (buf->filp != filp) { - DRM_ERROR("Process %d using buffer not owned\n", - current->pid); - retcode = -EINVAL; - goto cleanup; - } - if (buf->list != DRM_LIST_NONE) { - DRM_ERROR("Process %d using buffer on list %d\n", - current->pid, buf->list); - retcode = -EINVAL; - goto cleanup; - } - /* This isn't a race condition on - buf->list, since our concern is the - buffer reclaim during the time the - process closes the /dev/drm? handle, so - it can't also be doing DMA. */ - buf->list = DRM_LIST_PRIO; - buf->used = send_sizes[i]; - buf->context = d->context; - buf->while_locked = d->flags & _DRM_DMA_WHILE_LOCKED; - address = (unsigned long)buf->address; - length = buf->used; - if (!length) { - DRM_ERROR("0 length buffer\n"); - } - if (buf->pending) { - DRM_ERROR("Sending pending buffer:" - " buffer %d, offset %d\n", - send_indices[i], i); - retcode = -EINVAL; - goto cleanup; - } - if (buf->waiting) { - DRM_ERROR("Sending waiting buffer:" - " buffer %d, offset %d\n", - send_indices[i], i); - retcode = -EINVAL; - goto cleanup; - } - buf->pending = 1; - - if (dev->last_context != buf->context - && !(dev->queuelist[buf->context]->flags - & _DRM_CONTEXT_PRESERVED)) { - add_wait_queue(&dev->context_wait, &entry); - current->state = TASK_INTERRUPTIBLE; - /* PRE: dev->last_context != buf->context */ - DRM(context_switch)(dev, dev->last_context, - buf->context); - /* POST: we will wait for the context - switch and will dispatch on a later call - when dev->last_context == buf->context. - NOTE WE HOLD THE LOCK THROUGHOUT THIS - TIME! */ - schedule(); - current->state = TASK_RUNNING; - remove_wait_queue(&dev->context_wait, &entry); - if (signal_pending(current)) { - retcode = -EINTR; - goto cleanup; - } - if (dev->last_context != buf->context) { - DRM_ERROR("Context mismatch: %d %d\n", - dev->last_context, - buf->context); - } - } - - gamma_dma_dispatch(dev, address, length); - atomic_inc(&dev->counts[9]); /* _DRM_STAT_SPECIAL */ - atomic_add(length, &dev->counts[8]); /* _DRM_STAT_PRIMARY */ - - if (last_buf) { - gamma_free_buffer(dev, last_buf); - } - last_buf = buf; - } - - -cleanup: - if (last_buf) { - gamma_dma_ready(dev); - gamma_free_buffer(dev, last_buf); - } - if (send_indices) - DRM(free)(send_indices, d->send_count * sizeof(*send_indices), - DRM_MEM_DRIVER); - if (send_sizes) - DRM(free)(send_sizes, d->send_count * sizeof(*send_sizes), - DRM_MEM_DRIVER); - - if (must_free && !dev->context_flag) { - if (gamma_lock_free(dev, &dev->lock.hw_lock->lock, - DRM_KERNEL_CONTEXT)) { - DRM_ERROR("\n"); - } - } - clear_bit(0, &dev->interrupt_flag); - return retcode; -} - -static int gamma_dma_send_buffers(struct file *filp, - drm_device_t *dev, drm_dma_t *d) -{ - DECLARE_WAITQUEUE(entry, current); - drm_buf_t *last_buf = NULL; - int retcode = 0; - drm_device_dma_t *dma = dev->dma; - int send_index; - - if (get_user(send_index, &d->send_indices[d->send_count-1])) - return -EFAULT; - - if (d->flags & _DRM_DMA_BLOCK) { - last_buf = dma->buflist[send_index]; - add_wait_queue(&last_buf->dma_wait, &entry); - } - - if ((retcode = gamma_dma_enqueue(filp, d))) { - if (d->flags & _DRM_DMA_BLOCK) - remove_wait_queue(&last_buf->dma_wait, &entry); - return retcode; - } - - gamma_dma_schedule(dev, 0); - - if (d->flags & _DRM_DMA_BLOCK) { - DRM_DEBUG("%d waiting\n", current->pid); - for (;;) { - current->state = TASK_INTERRUPTIBLE; - if (!last_buf->waiting && !last_buf->pending) - break; /* finished */ - schedule(); - if (signal_pending(current)) { - retcode = -EINTR; /* Can't restart */ - break; - } - } - current->state = TASK_RUNNING; - DRM_DEBUG("%d running\n", current->pid); - remove_wait_queue(&last_buf->dma_wait, &entry); - if (!retcode - || (last_buf->list==DRM_LIST_PEND && !last_buf->pending)) { - if (!waitqueue_active(&last_buf->dma_wait)) { - gamma_free_buffer(dev, last_buf); - } - } - if (retcode) { - DRM_ERROR("ctx%d w%d p%d c%ld i%d l%d pid:%d\n", - d->context, - last_buf->waiting, - last_buf->pending, - (long)DRM_WAITCOUNT(dev, d->context), - last_buf->idx, - last_buf->list, - current->pid); - } - } - return retcode; -} - -int gamma_dma(struct inode *inode, struct file *filp, unsigned int cmd, - unsigned long arg) -{ - drm_file_t *priv = filp->private_data; - drm_device_t *dev = priv->dev; - drm_device_dma_t *dma = dev->dma; - int retcode = 0; - drm_dma_t __user *argp = (void __user *)arg; - drm_dma_t d; - - if (copy_from_user(&d, argp, sizeof(d))) - return -EFAULT; - - if (d.send_count < 0 || d.send_count > dma->buf_count) { - DRM_ERROR("Process %d trying to send %d buffers (of %d max)\n", - current->pid, d.send_count, dma->buf_count); - return -EINVAL; - } - - if (d.request_count < 0 || d.request_count > dma->buf_count) { - DRM_ERROR("Process %d trying to get %d buffers (of %d max)\n", - current->pid, d.request_count, dma->buf_count); - return -EINVAL; - } - - if (d.send_count) { - if (d.flags & _DRM_DMA_PRIORITY) - retcode = gamma_dma_priority(filp, dev, &d); - else - retcode = gamma_dma_send_buffers(filp, dev, &d); - } - - d.granted_count = 0; - - if (!retcode && d.request_count) { - retcode = gamma_dma_get_buffers(filp, &d); - } - - DRM_DEBUG("%d returning, granted = %d\n", - current->pid, d.granted_count); - if (copy_to_user(argp, &d, sizeof(d))) - return -EFAULT; - - return retcode; -} - -/* ============================================================= - * DMA initialization, cleanup - */ - -static int gamma_do_init_dma( drm_device_t *dev, drm_gamma_init_t *init ) -{ - drm_gamma_private_t *dev_priv; - drm_device_dma_t *dma = dev->dma; - drm_buf_t *buf; - int i; - struct list_head *list; - unsigned long *pgt; - - DRM_DEBUG( "%s\n", __FUNCTION__ ); - - dev_priv = DRM(alloc)( sizeof(drm_gamma_private_t), - DRM_MEM_DRIVER ); - if ( !dev_priv ) - return -ENOMEM; - - dev->dev_private = (void *)dev_priv; - - memset( dev_priv, 0, sizeof(drm_gamma_private_t) ); - - dev_priv->num_rast = init->num_rast; - - list_for_each(list, &dev->maplist->head) { - drm_map_list_t *r_list = list_entry(list, drm_map_list_t, head); - if( r_list->map && - r_list->map->type == _DRM_SHM && - r_list->map->flags & _DRM_CONTAINS_LOCK ) { - dev_priv->sarea = r_list->map; - break; - } - } - - dev_priv->mmio0 = drm_core_findmap(dev, init->mmio0); - dev_priv->mmio1 = drm_core_findmap(dev, init->mmio1); - dev_priv->mmio2 = drm_core_findmap(dev, init->mmio2); - dev_priv->mmio3 = drm_core_findmap(dev, init->mmio3); - - dev_priv->sarea_priv = (drm_gamma_sarea_t *) - ((u8 *)dev_priv->sarea->handle + - init->sarea_priv_offset); - - if (init->pcimode) { - buf = dma->buflist[GLINT_DRI_BUF_COUNT]; - pgt = buf->address; - - for (i = 0; i < GLINT_DRI_BUF_COUNT; i++) { - buf = dma->buflist[i]; - *pgt = virt_to_phys((void*)buf->address) | 0x07; - pgt++; - } - - buf = dma->buflist[GLINT_DRI_BUF_COUNT]; - } else { - dev->agp_buffer_map = drm_core_findmap(dev, init->buffers_offset); - drm_core_ioremap( dev->agp_buffer_map, dev); - - buf = dma->buflist[GLINT_DRI_BUF_COUNT]; - pgt = buf->address; - - for (i = 0; i < GLINT_DRI_BUF_COUNT; i++) { - buf = dma->buflist[i]; - *pgt = (unsigned long)buf->address + 0x07; - pgt++; - } - - buf = dma->buflist[GLINT_DRI_BUF_COUNT]; - - while (GAMMA_READ(GAMMA_INFIFOSPACE) < 1); - GAMMA_WRITE( GAMMA_GDMACONTROL, 0xe); - } - while (GAMMA_READ(GAMMA_INFIFOSPACE) < 2); - GAMMA_WRITE( GAMMA_PAGETABLEADDR, virt_to_phys((void*)buf->address) ); - GAMMA_WRITE( GAMMA_PAGETABLELENGTH, 2 ); - - return 0; -} - -int gamma_do_cleanup_dma( drm_device_t *dev ) -{ - DRM_DEBUG( "%s\n", __FUNCTION__ ); - - /* Make sure interrupts are disabled here because the uninstall ioctl - * may not have been called from userspace and after dev_private - * is freed, it's too late. - */ - if (drm_core_check_feature(dev, DRIVER_HAVE_IRQ)) - if ( dev->irq_enabled ) - DRM(irq_uninstall)(dev); - - if ( dev->dev_private ) { - - if ( dev->agp_buffer_map != NULL ) - drm_core_ioremapfree( dev->agp_buffer_map, dev ); - - DRM(free)( dev->dev_private, sizeof(drm_gamma_private_t), - DRM_MEM_DRIVER ); - dev->dev_private = NULL; - } - - return 0; -} - -int gamma_dma_init( struct inode *inode, struct file *filp, - unsigned int cmd, unsigned long arg ) -{ - drm_file_t *priv = filp->private_data; - drm_device_t *dev = priv->dev; - drm_gamma_init_t init; - - LOCK_TEST_WITH_RETURN( dev, filp ); - - if ( copy_from_user( &init, (drm_gamma_init_t __user *)arg, sizeof(init) ) ) - return -EFAULT; - - switch ( init.func ) { - case GAMMA_INIT_DMA: - return gamma_do_init_dma( dev, &init ); - case GAMMA_CLEANUP_DMA: - return gamma_do_cleanup_dma( dev ); - } - - return -EINVAL; -} - -static int gamma_do_copy_dma( drm_device_t *dev, drm_gamma_copy_t *copy ) -{ - drm_device_dma_t *dma = dev->dma; - unsigned int *screenbuf; - - DRM_DEBUG( "%s\n", __FUNCTION__ ); - - /* We've DRM_RESTRICTED this DMA buffer */ - - screenbuf = dma->buflist[ GLINT_DRI_BUF_COUNT + 1 ]->address; - -#if 0 - *buffer++ = 0x180; /* Tag (FilterMode) */ - *buffer++ = 0x200; /* Allow FBColor through */ - *buffer++ = 0x53B; /* Tag */ - *buffer++ = copy->Pitch; - *buffer++ = 0x53A; /* Tag */ - *buffer++ = copy->SrcAddress; - *buffer++ = 0x539; /* Tag */ - *buffer++ = copy->WidthHeight; /* Initiates transfer */ - *buffer++ = 0x53C; /* Tag - DMAOutputAddress */ - *buffer++ = virt_to_phys((void*)screenbuf); - *buffer++ = 0x53D; /* Tag - DMAOutputCount */ - *buffer++ = copy->Count; /* Reads HostOutFifo BLOCKS until ..*/ - - /* Data now sitting in dma->buflist[ GLINT_DRI_BUF_COUNT + 1 ] */ - /* Now put it back to the screen */ - - *buffer++ = 0x180; /* Tag (FilterMode) */ - *buffer++ = 0x400; /* Allow Sync through */ - *buffer++ = 0x538; /* Tag - DMARectangleReadTarget */ - *buffer++ = 0x155; /* FBSourceData | count */ - *buffer++ = 0x537; /* Tag */ - *buffer++ = copy->Pitch; - *buffer++ = 0x536; /* Tag */ - *buffer++ = copy->DstAddress; - *buffer++ = 0x535; /* Tag */ - *buffer++ = copy->WidthHeight; /* Initiates transfer */ - *buffer++ = 0x530; /* Tag - DMAAddr */ - *buffer++ = virt_to_phys((void*)screenbuf); - *buffer++ = 0x531; - *buffer++ = copy->Count; /* initiates DMA transfer of color data */ -#endif - - /* need to dispatch it now */ - - return 0; -} - -int gamma_dma_copy( struct inode *inode, struct file *filp, - unsigned int cmd, unsigned long arg ) -{ - drm_file_t *priv = filp->private_data; - drm_device_t *dev = priv->dev; - drm_gamma_copy_t copy; - - if ( copy_from_user( ©, (drm_gamma_copy_t __user *)arg, sizeof(copy) ) ) - return -EFAULT; - - return gamma_do_copy_dma( dev, © ); -} - -/* ============================================================= - * Per Context SAREA Support - */ - -int gamma_getsareactx(struct inode *inode, struct file *filp, - unsigned int cmd, unsigned long arg) -{ - drm_file_t *priv = filp->private_data; - drm_device_t *dev = priv->dev; - drm_ctx_priv_map_t __user *argp = (void __user *)arg; - drm_ctx_priv_map_t request; - drm_map_t *map; - - if (copy_from_user(&request, argp, sizeof(request))) - return -EFAULT; - - down(&dev->struct_sem); - if ((int)request.ctx_id >= dev->max_context) { - up(&dev->struct_sem); - return -EINVAL; - } - - map = dev->context_sareas[request.ctx_id]; - up(&dev->struct_sem); - - request.handle = map->handle; - if (copy_to_user(argp, &request, sizeof(request))) - return -EFAULT; - return 0; -} - -int gamma_setsareactx(struct inode *inode, struct file *filp, - unsigned int cmd, unsigned long arg) -{ - drm_file_t *priv = filp->private_data; - drm_device_t *dev = priv->dev; - drm_ctx_priv_map_t request; - drm_map_t *map = NULL; - drm_map_list_t *r_list; - struct list_head *list; - - if (copy_from_user(&request, - (drm_ctx_priv_map_t __user *)arg, - sizeof(request))) - return -EFAULT; - - down(&dev->struct_sem); - r_list = NULL; - list_for_each(list, &dev->maplist->head) { - r_list = list_entry(list, drm_map_list_t, head); - if(r_list->map && - r_list->map->handle == request.handle) break; - } - if (list == &(dev->maplist->head)) { - up(&dev->struct_sem); - return -EINVAL; - } - map = r_list->map; - up(&dev->struct_sem); - - if (!map) return -EINVAL; - - down(&dev->struct_sem); - if ((int)request.ctx_id >= dev->max_context) { - up(&dev->struct_sem); - return -EINVAL; - } - dev->context_sareas[request.ctx_id] = map; - up(&dev->struct_sem); - return 0; -} - -void gamma_driver_irq_preinstall( drm_device_t *dev ) { - drm_gamma_private_t *dev_priv = - (drm_gamma_private_t *)dev->dev_private; - - while(GAMMA_READ(GAMMA_INFIFOSPACE) < 2) - cpu_relax(); - - GAMMA_WRITE( GAMMA_GCOMMANDMODE, 0x00000004 ); - GAMMA_WRITE( GAMMA_GDMACONTROL, 0x00000000 ); -} - -void gamma_driver_irq_postinstall( drm_device_t *dev ) { - drm_gamma_private_t *dev_priv = - (drm_gamma_private_t *)dev->dev_private; - - while(GAMMA_READ(GAMMA_INFIFOSPACE) < 3) - cpu_relax(); - - GAMMA_WRITE( GAMMA_GINTENABLE, 0x00002001 ); - GAMMA_WRITE( GAMMA_COMMANDINTENABLE, 0x00000008 ); - GAMMA_WRITE( GAMMA_GDELAYTIMER, 0x00039090 ); -} - -void gamma_driver_irq_uninstall( drm_device_t *dev ) { - drm_gamma_private_t *dev_priv = - (drm_gamma_private_t *)dev->dev_private; - if (!dev_priv) - return; - - while(GAMMA_READ(GAMMA_INFIFOSPACE) < 3) - cpu_relax(); - - GAMMA_WRITE( GAMMA_GDELAYTIMER, 0x00000000 ); - GAMMA_WRITE( GAMMA_COMMANDINTENABLE, 0x00000000 ); - GAMMA_WRITE( GAMMA_GINTENABLE, 0x00000000 ); -} - -extern drm_ioctl_desc_t DRM(ioctls)[]; - -static int gamma_driver_preinit(drm_device_t *dev) -{ - /* reset the finish ioctl */ - DRM(ioctls)[DRM_IOCTL_NR(DRM_IOCTL_FINISH)].func = DRM(finish); - return 0; -} - -static void gamma_driver_pretakedown(drm_device_t *dev) -{ - gamma_do_cleanup_dma(dev); -} - -static void gamma_driver_dma_ready(drm_device_t *dev) -{ - gamma_dma_ready(dev); -} - -static int gamma_driver_dma_quiescent(drm_device_t *dev) -{ - drm_gamma_private_t *dev_priv = ( - drm_gamma_private_t *)dev->dev_private; - if (dev_priv->num_rast == 2) - gamma_dma_quiescent_dual(dev); - else gamma_dma_quiescent_single(dev); - return 0; -} - -void gamma_driver_register_fns(drm_device_t *dev) -{ - dev->driver_features = DRIVER_USE_AGP | DRIVER_USE_MTRR | DRIVER_PCI_DMA | DRIVER_HAVE_DMA | DRIVER_HAVE_IRQ; - DRM(fops).read = gamma_fops_read; - DRM(fops).poll = gamma_fops_poll; - dev->driver.preinit = gamma_driver_preinit; - dev->driver.pretakedown = gamma_driver_pretakedown; - dev->driver.dma_ready = gamma_driver_dma_ready; - dev->driver.dma_quiescent = gamma_driver_dma_quiescent; - dev->driver.dma_flush_block_and_flush = gamma_flush_block_and_flush; - dev->driver.dma_flush_unblock = gamma_flush_unblock; -} diff --git a/drivers/char/drm/gamma_drm.h b/drivers/char/drm/gamma_drm.h deleted file mode 100644 index 20819ded0e1..00000000000 --- a/drivers/char/drm/gamma_drm.h +++ /dev/null @@ -1,90 +0,0 @@ -#ifndef _GAMMA_DRM_H_ -#define _GAMMA_DRM_H_ - -typedef struct _drm_gamma_tex_region { - unsigned char next, prev; /* indices to form a circular LRU */ - unsigned char in_use; /* owned by a client, or free? */ - int age; /* tracked by clients to update local LRU's */ -} drm_gamma_tex_region_t; - -typedef struct { - unsigned int GDeltaMode; - unsigned int GDepthMode; - unsigned int GGeometryMode; - unsigned int GTransformMode; -} drm_gamma_context_regs_t; - -typedef struct _drm_gamma_sarea { - drm_gamma_context_regs_t context_state; - - unsigned int dirty; - - - /* Maintain an LRU of contiguous regions of texture space. If - * you think you own a region of texture memory, and it has an - * age different to the one you set, then you are mistaken and - * it has been stolen by another client. If global texAge - * hasn't changed, there is no need to walk the list. - * - * These regions can be used as a proxy for the fine-grained - * texture information of other clients - by maintaining them - * in the same lru which is used to age their own textures, - * clients have an approximate lru for the whole of global - * texture space, and can make informed decisions as to which - * areas to kick out. There is no need to choose whether to - * kick out your own texture or someone else's - simply eject - * them all in LRU order. - */ - -#define GAMMA_NR_TEX_REGIONS 64 - drm_gamma_tex_region_t texList[GAMMA_NR_TEX_REGIONS+1]; - /* Last elt is sentinal */ - int texAge; /* last time texture was uploaded */ - int last_enqueue; /* last time a buffer was enqueued */ - int last_dispatch; /* age of the most recently dispatched buffer */ - int last_quiescent; /* */ - int ctxOwner; /* last context to upload state */ - - int vertex_prim; -} drm_gamma_sarea_t; - -/* WARNING: If you change any of these defines, make sure to change the - * defines in the Xserver file (xf86drmGamma.h) - */ - -/* Gamma specific ioctls - * The device specific ioctl range is 0x40 to 0x79. - */ -#define DRM_IOCTL_GAMMA_INIT DRM_IOW( 0x40, drm_gamma_init_t) -#define DRM_IOCTL_GAMMA_COPY DRM_IOW( 0x41, drm_gamma_copy_t) - -typedef struct drm_gamma_copy { - unsigned int DMAOutputAddress; - unsigned int DMAOutputCount; - unsigned int DMAReadGLINTSource; - unsigned int DMARectangleWriteAddress; - unsigned int DMARectangleWriteLinePitch; - unsigned int DMARectangleWrite; - unsigned int DMARectangleReadAddress; - unsigned int DMARectangleReadLinePitch; - unsigned int DMARectangleRead; - unsigned int DMARectangleReadTarget; -} drm_gamma_copy_t; - -typedef struct drm_gamma_init { - enum { - GAMMA_INIT_DMA = 0x01, - GAMMA_CLEANUP_DMA = 0x02 - } func; - - int sarea_priv_offset; - int pcimode; - unsigned int mmio0; - unsigned int mmio1; - unsigned int mmio2; - unsigned int mmio3; - unsigned int buffers_offset; - int num_rast; -} drm_gamma_init_t; - -#endif /* _GAMMA_DRM_H_ */ diff --git a/drivers/char/drm/gamma_drv.c b/drivers/char/drm/gamma_drv.c deleted file mode 100644 index e7e64b62792..00000000000 --- a/drivers/char/drm/gamma_drv.c +++ /dev/null @@ -1,59 +0,0 @@ -/* gamma.c -- 3dlabs GMX 2000 driver -*- linux-c -*- - * Created: Mon Jan 4 08:58:31 1999 by faith@precisioninsight.com - * - * Copyright 1999 Precision Insight, Inc., Cedar Park, Texas. - * Copyright 2000 VA Linux Systems, Inc., Sunnyvale, California. - * All Rights Reserved. - * - * Permission is hereby granted, free of charge, to any person obtaining a - * copy of this software and associated documentation files (the "Software"), - * to deal in the Software without restriction, including without limitation - * the rights to use, copy, modify, merge, publish, distribute, sublicense, - * and/or sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following conditions: - * - * The above copyright notice and this permission notice (including the next - * paragraph) shall be included in all copies or substantial portions of the - * Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR - * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, - * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL - * PRECISION INSIGHT AND/OR ITS SUPPLIERS BE LIABLE FOR ANY CLAIM, DAMAGES OR - * OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, - * ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER - * DEALINGS IN THE SOFTWARE. - * - * Authors: - * Rickard E. (Rik) Faith - * Gareth Hughes - */ - -#include -#include "gamma.h" -#include "drmP.h" -#include "drm.h" -#include "gamma_drm.h" -#include "gamma_drv.h" - -#include "drm_auth.h" -#include "drm_agpsupport.h" -#include "drm_bufs.h" -#include "gamma_context.h" /* NOTE! */ -#include "drm_dma.h" -#include "gamma_old_dma.h" /* NOTE */ -#include "drm_drawable.h" -#include "drm_drv.h" - -#include "drm_fops.h" -#include "drm_init.h" -#include "drm_ioctl.h" -#include "drm_irq.h" -#include "gamma_lists.h" /* NOTE */ -#include "drm_lock.h" -#include "gamma_lock.h" /* NOTE */ -#include "drm_memory.h" -#include "drm_proc.h" -#include "drm_vm.h" -#include "drm_stub.h" -#include "drm_scatter.h" diff --git a/drivers/char/drm/gamma_drv.h b/drivers/char/drm/gamma_drv.h deleted file mode 100644 index 146fcc6253c..00000000000 --- a/drivers/char/drm/gamma_drv.h +++ /dev/null @@ -1,147 +0,0 @@ -/* gamma_drv.h -- Private header for 3dlabs GMX 2000 driver -*- linux-c -*- - * Created: Mon Jan 4 10:05:05 1999 by faith@precisioninsight.com - * - * Copyright 1999 Precision Insight, Inc., Cedar Park, Texas. - * Copyright 2000 VA Linux Systems, Inc., Sunnyvale, California. - * All rights reserved. - * - * Permission is hereby granted, free of charge, to any person obtaining a - * copy of this software and associated documentation files (the "Software"), - * to deal in the Software without restriction, including without limitation - * the rights to use, copy, modify, merge, publish, distribute, sublicense, - * and/or sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following conditions: - * - * The above copyright notice and this permission notice (including the next - * paragraph) shall be included in all copies or substantial portions of the - * Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR - * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, - * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL - * PRECISION INSIGHT AND/OR ITS SUPPLIERS BE LIABLE FOR ANY CLAIM, DAMAGES OR - * OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, - * ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER - * DEALINGS IN THE SOFTWARE. - * - * Authors: - * Rickard E. (Rik) Faith - * - */ - -#ifndef _GAMMA_DRV_H_ -#define _GAMMA_DRV_H_ - -typedef struct drm_gamma_private { - drm_gamma_sarea_t *sarea_priv; - drm_map_t *sarea; - drm_map_t *mmio0; - drm_map_t *mmio1; - drm_map_t *mmio2; - drm_map_t *mmio3; - int num_rast; -} drm_gamma_private_t; - - /* gamma_dma.c */ -extern int gamma_dma_init( struct inode *inode, struct file *filp, - unsigned int cmd, unsigned long arg ); -extern int gamma_dma_copy( struct inode *inode, struct file *filp, - unsigned int cmd, unsigned long arg ); - -extern int gamma_do_cleanup_dma( drm_device_t *dev ); -extern void gamma_dma_ready(drm_device_t *dev); -extern void gamma_dma_quiescent_single(drm_device_t *dev); -extern void gamma_dma_quiescent_dual(drm_device_t *dev); - - /* gamma_dma.c */ -extern int gamma_dma_schedule(drm_device_t *dev, int locked); -extern int gamma_dma(struct inode *inode, struct file *filp, - unsigned int cmd, unsigned long arg); -extern int gamma_find_devices(void); -extern int gamma_found(void); - -/* Gamma-specific code pulled from drm_fops.h: - */ -extern int DRM(finish)(struct inode *inode, struct file *filp, - unsigned int cmd, unsigned long arg); -extern int DRM(flush_unblock)(drm_device_t *dev, int context, - drm_lock_flags_t flags); -extern int DRM(flush_block_and_flush)(drm_device_t *dev, int context, - drm_lock_flags_t flags); - -/* Gamma-specific code pulled from drm_dma.h: - */ -extern void DRM(clear_next_buffer)(drm_device_t *dev); -extern int DRM(select_queue)(drm_device_t *dev, - void (*wrapper)(unsigned long)); -extern int DRM(dma_enqueue)(struct file *filp, drm_dma_t *dma); -extern int DRM(dma_get_buffers)(struct file *filp, drm_dma_t *dma); - - -/* Gamma-specific code pulled from drm_lists.h (now renamed gamma_lists.h): - */ -extern int DRM(waitlist_create)(drm_waitlist_t *bl, int count); -extern int DRM(waitlist_destroy)(drm_waitlist_t *bl); -extern int DRM(waitlist_put)(drm_waitlist_t *bl, drm_buf_t *buf); -extern drm_buf_t *DRM(waitlist_get)(drm_waitlist_t *bl); -extern int DRM(freelist_create)(drm_freelist_t *bl, int count); -extern int DRM(freelist_destroy)(drm_freelist_t *bl); -extern int DRM(freelist_put)(drm_device_t *dev, drm_freelist_t *bl, - drm_buf_t *buf); -extern drm_buf_t *DRM(freelist_get)(drm_freelist_t *bl, int block); - -/* externs for gamma changes to the ops */ -extern struct file_operations DRM(fops); -extern unsigned int gamma_fops_poll(struct file *filp, struct poll_table_struct *wait); -extern ssize_t gamma_fops_read(struct file *filp, char __user *buf, size_t count, loff_t *off); - - -#define GLINT_DRI_BUF_COUNT 256 - -#define GAMMA_OFF(reg) \ - ((reg < 0x1000) \ - ? reg \ - : ((reg < 0x10000) \ - ? (reg - 0x1000) \ - : ((reg < 0x11000) \ - ? (reg - 0x10000) \ - : (reg - 0x11000)))) - -#define GAMMA_BASE(reg) ((unsigned long) \ - ((reg < 0x1000) ? dev_priv->mmio0->handle : \ - ((reg < 0x10000) ? dev_priv->mmio1->handle : \ - ((reg < 0x11000) ? dev_priv->mmio2->handle : \ - dev_priv->mmio3->handle)))) -#define GAMMA_ADDR(reg) (GAMMA_BASE(reg) + GAMMA_OFF(reg)) -#define GAMMA_DEREF(reg) *(__volatile__ int *)GAMMA_ADDR(reg) -#define GAMMA_READ(reg) GAMMA_DEREF(reg) -#define GAMMA_WRITE(reg,val) do { GAMMA_DEREF(reg) = val; } while (0) - -#define GAMMA_BROADCASTMASK 0x9378 -#define GAMMA_COMMANDINTENABLE 0x0c48 -#define GAMMA_DMAADDRESS 0x0028 -#define GAMMA_DMACOUNT 0x0030 -#define GAMMA_FILTERMODE 0x8c00 -#define GAMMA_GCOMMANDINTFLAGS 0x0c50 -#define GAMMA_GCOMMANDMODE 0x0c40 -#define GAMMA_QUEUED_DMA_MODE 1<<1 -#define GAMMA_GCOMMANDSTATUS 0x0c60 -#define GAMMA_GDELAYTIMER 0x0c38 -#define GAMMA_GDMACONTROL 0x0060 -#define GAMMA_USE_AGP 1<<1 -#define GAMMA_GINTENABLE 0x0808 -#define GAMMA_GINTFLAGS 0x0810 -#define GAMMA_INFIFOSPACE 0x0018 -#define GAMMA_OUTFIFOWORDS 0x0020 -#define GAMMA_OUTPUTFIFO 0x2000 -#define GAMMA_SYNC 0x8c40 -#define GAMMA_SYNC_TAG 0x0188 -#define GAMMA_PAGETABLEADDR 0x0C00 -#define GAMMA_PAGETABLELENGTH 0x0C08 - -#define GAMMA_PASSTHROUGH 0x1FE -#define GAMMA_DMAADDRTAG 0x530 -#define GAMMA_DMACOUNTTAG 0x531 -#define GAMMA_COMMANDINTTAG 0x532 - -#endif diff --git a/drivers/char/drm/gamma_lists.h b/drivers/char/drm/gamma_lists.h deleted file mode 100644 index 2d93f412b96..00000000000 --- a/drivers/char/drm/gamma_lists.h +++ /dev/null @@ -1,215 +0,0 @@ -/* drm_lists.h -- Buffer list handling routines -*- linux-c -*- - * Created: Mon Apr 19 20:54:22 1999 by faith@valinux.com - * - * Copyright 1999 Precision Insight, Inc., Cedar Park, Texas. - * Copyright 2000 VA Linux Systems, Inc., Sunnyvale, California. - * All Rights Reserved. - * - * Permission is hereby granted, free of charge, to any person obtaining a - * copy of this software and associated documentation files (the "Software"), - * to deal in the Software without restriction, including without limitation - * the rights to use, copy, modify, merge, publish, distribute, sublicense, - * and/or sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following conditions: - * - * The above copyright notice and this permission notice (including the next - * paragraph) shall be included in all copies or substantial portions of the - * Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR - * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, - * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL - * VA LINUX SYSTEMS AND/OR ITS SUPPLIERS BE LIABLE FOR ANY CLAIM, DAMAGES OR - * OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, - * ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. - * - * Authors: - * Rickard E. (Rik) Faith - * Gareth Hughes - */ - -#include "drmP.h" - - -int DRM(waitlist_create)(drm_waitlist_t *bl, int count) -{ - if (bl->count) return -EINVAL; - - bl->bufs = DRM(alloc)((bl->count + 2) * sizeof(*bl->bufs), - DRM_MEM_BUFLISTS); - - if(!bl->bufs) return -ENOMEM; - memset(bl->bufs, 0, sizeof(*bl->bufs)); - bl->count = count; - bl->rp = bl->bufs; - bl->wp = bl->bufs; - bl->end = &bl->bufs[bl->count+1]; - spin_lock_init(&bl->write_lock); - spin_lock_init(&bl->read_lock); - return 0; -} - -int DRM(waitlist_destroy)(drm_waitlist_t *bl) -{ - if (bl->rp != bl->wp) return -EINVAL; - if (bl->bufs) DRM(free)(bl->bufs, - (bl->count + 2) * sizeof(*bl->bufs), - DRM_MEM_BUFLISTS); - bl->count = 0; - bl->bufs = NULL; - bl->rp = NULL; - bl->wp = NULL; - bl->end = NULL; - return 0; -} - -int DRM(waitlist_put)(drm_waitlist_t *bl, drm_buf_t *buf) -{ - int left; - unsigned long flags; - - left = DRM_LEFTCOUNT(bl); - if (!left) { - DRM_ERROR("Overflow while adding buffer %d from filp %p\n", - buf->idx, buf->filp); - return -EINVAL; - } - buf->list = DRM_LIST_WAIT; - - spin_lock_irqsave(&bl->write_lock, flags); - *bl->wp = buf; - if (++bl->wp >= bl->end) bl->wp = bl->bufs; - spin_unlock_irqrestore(&bl->write_lock, flags); - - return 0; -} - -drm_buf_t *DRM(waitlist_get)(drm_waitlist_t *bl) -{ - drm_buf_t *buf; - unsigned long flags; - - spin_lock_irqsave(&bl->read_lock, flags); - buf = *bl->rp; - if (bl->rp == bl->wp) { - spin_unlock_irqrestore(&bl->read_lock, flags); - return NULL; - } - if (++bl->rp >= bl->end) bl->rp = bl->bufs; - spin_unlock_irqrestore(&bl->read_lock, flags); - - return buf; -} - -int DRM(freelist_create)(drm_freelist_t *bl, int count) -{ - atomic_set(&bl->count, 0); - bl->next = NULL; - init_waitqueue_head(&bl->waiting); - bl->low_mark = 0; - bl->high_mark = 0; - atomic_set(&bl->wfh, 0); - spin_lock_init(&bl->lock); - ++bl->initialized; - return 0; -} - -int DRM(freelist_destroy)(drm_freelist_t *bl) -{ - atomic_set(&bl->count, 0); - bl->next = NULL; - return 0; -} - -int DRM(freelist_put)(drm_device_t *dev, drm_freelist_t *bl, drm_buf_t *buf) -{ - drm_device_dma_t *dma = dev->dma; - - if (!dma) { - DRM_ERROR("No DMA support\n"); - return 1; - } - - if (buf->waiting || buf->pending || buf->list == DRM_LIST_FREE) { - DRM_ERROR("Freed buffer %d: w%d, p%d, l%d\n", - buf->idx, buf->waiting, buf->pending, buf->list); - } - if (!bl) return 1; - buf->list = DRM_LIST_FREE; - - spin_lock(&bl->lock); - buf->next = bl->next; - bl->next = buf; - spin_unlock(&bl->lock); - - atomic_inc(&bl->count); - if (atomic_read(&bl->count) > dma->buf_count) { - DRM_ERROR("%d of %d buffers free after addition of %d\n", - atomic_read(&bl->count), dma->buf_count, buf->idx); - return 1; - } - /* Check for high water mark */ - if (atomic_read(&bl->wfh) && atomic_read(&bl->count)>=bl->high_mark) { - atomic_set(&bl->wfh, 0); - wake_up_interruptible(&bl->waiting); - } - return 0; -} - -static drm_buf_t *DRM(freelist_try)(drm_freelist_t *bl) -{ - drm_buf_t *buf; - - if (!bl) return NULL; - - /* Get buffer */ - spin_lock(&bl->lock); - if (!bl->next) { - spin_unlock(&bl->lock); - return NULL; - } - buf = bl->next; - bl->next = bl->next->next; - spin_unlock(&bl->lock); - - atomic_dec(&bl->count); - buf->next = NULL; - buf->list = DRM_LIST_NONE; - if (buf->waiting || buf->pending) { - DRM_ERROR("Free buffer %d: w%d, p%d, l%d\n", - buf->idx, buf->waiting, buf->pending, buf->list); - } - - return buf; -} - -drm_buf_t *DRM(freelist_get)(drm_freelist_t *bl, int block) -{ - drm_buf_t *buf = NULL; - DECLARE_WAITQUEUE(entry, current); - - if (!bl || !bl->initialized) return NULL; - - /* Check for low water mark */ - if (atomic_read(&bl->count) <= bl->low_mark) /* Became low */ - atomic_set(&bl->wfh, 1); - if (atomic_read(&bl->wfh)) { - if (block) { - add_wait_queue(&bl->waiting, &entry); - for (;;) { - current->state = TASK_INTERRUPTIBLE; - if (!atomic_read(&bl->wfh) - && (buf = DRM(freelist_try)(bl))) break; - schedule(); - if (signal_pending(current)) break; - } - current->state = TASK_RUNNING; - remove_wait_queue(&bl->waiting, &entry); - } - return buf; - } - - return DRM(freelist_try)(bl); -} - diff --git a/drivers/char/drm/gamma_lock.h b/drivers/char/drm/gamma_lock.h deleted file mode 100644 index ddec67e4ed1..00000000000 --- a/drivers/char/drm/gamma_lock.h +++ /dev/null @@ -1,140 +0,0 @@ -/* lock.c -- IOCTLs for locking -*- linux-c -*- - * Created: Tue Feb 2 08:37:54 1999 by faith@valinux.com - * - * Copyright 1999 Precision Insight, Inc., Cedar Park, Texas. - * Copyright 2000 VA Linux Systems, Inc., Sunnyvale, California. - * All Rights Reserved. - * - * Permission is hereby granted, free of charge, to any person obtaining a - * copy of this software and associated documentation files (the "Software"), - * to deal in the Software without restriction, including without limitation - * the rights to use, copy, modify, merge, publish, distribute, sublicense, - * and/or sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following conditions: - * - * The above copyright notice and this permission notice (including the next - * paragraph) shall be included in all copies or substantial portions of the - * Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR - * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, - * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL - * VA LINUX SYSTEMS AND/OR ITS SUPPLIERS BE LIABLE FOR ANY CLAIM, DAMAGES OR - * OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, - * ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. - * - * Authors: - * Rickard E. (Rik) Faith - * Gareth Hughes - */ - - -/* Gamma-specific code extracted from drm_lock.h: - */ -static int DRM(flush_queue)(drm_device_t *dev, int context) -{ - DECLARE_WAITQUEUE(entry, current); - int ret = 0; - drm_queue_t *q = dev->queuelist[context]; - - DRM_DEBUG("\n"); - - atomic_inc(&q->use_count); - if (atomic_read(&q->use_count) > 1) { - atomic_inc(&q->block_write); - add_wait_queue(&q->flush_queue, &entry); - atomic_inc(&q->block_count); - for (;;) { - current->state = TASK_INTERRUPTIBLE; - if (!DRM_BUFCOUNT(&q->waitlist)) break; - schedule(); - if (signal_pending(current)) { - ret = -EINTR; /* Can't restart */ - break; - } - } - atomic_dec(&q->block_count); - current->state = TASK_RUNNING; - remove_wait_queue(&q->flush_queue, &entry); - } - atomic_dec(&q->use_count); - - /* NOTE: block_write is still incremented! - Use drm_flush_unlock_queue to decrement. */ - return ret; -} - -static int DRM(flush_unblock_queue)(drm_device_t *dev, int context) -{ - drm_queue_t *q = dev->queuelist[context]; - - DRM_DEBUG("\n"); - - atomic_inc(&q->use_count); - if (atomic_read(&q->use_count) > 1) { - if (atomic_read(&q->block_write)) { - atomic_dec(&q->block_write); - wake_up_interruptible(&q->write_queue); - } - } - atomic_dec(&q->use_count); - return 0; -} - -int DRM(flush_block_and_flush)(drm_device_t *dev, int context, - drm_lock_flags_t flags) -{ - int ret = 0; - int i; - - DRM_DEBUG("\n"); - - if (flags & _DRM_LOCK_FLUSH) { - ret = DRM(flush_queue)(dev, DRM_KERNEL_CONTEXT); - if (!ret) ret = DRM(flush_queue)(dev, context); - } - if (flags & _DRM_LOCK_FLUSH_ALL) { - for (i = 0; !ret && i < dev->queue_count; i++) { - ret = DRM(flush_queue)(dev, i); - } - } - return ret; -} - -int DRM(flush_unblock)(drm_device_t *dev, int context, drm_lock_flags_t flags) -{ - int ret = 0; - int i; - - DRM_DEBUG("\n"); - - if (flags & _DRM_LOCK_FLUSH) { - ret = DRM(flush_unblock_queue)(dev, DRM_KERNEL_CONTEXT); - if (!ret) ret = DRM(flush_unblock_queue)(dev, context); - } - if (flags & _DRM_LOCK_FLUSH_ALL) { - for (i = 0; !ret && i < dev->queue_count; i++) { - ret = DRM(flush_unblock_queue)(dev, i); - } - } - - return ret; -} - -int DRM(finish)(struct inode *inode, struct file *filp, unsigned int cmd, - unsigned long arg) -{ - drm_file_t *priv = filp->private_data; - drm_device_t *dev = priv->dev; - int ret = 0; - drm_lock_t lock; - - DRM_DEBUG("\n"); - - if (copy_from_user(&lock, (drm_lock_t __user *)arg, sizeof(lock))) - return -EFAULT; - ret = DRM(flush_block_and_flush)(dev, lock.context, lock.flags); - DRM(flush_unblock)(dev, lock.context, lock.flags); - return ret; -} diff --git a/drivers/char/drm/gamma_old_dma.h b/drivers/char/drm/gamma_old_dma.h deleted file mode 100644 index abdd454aab9..00000000000 --- a/drivers/char/drm/gamma_old_dma.h +++ /dev/null @@ -1,313 +0,0 @@ -/* drm_dma.c -- DMA IOCTL and function support -*- linux-c -*- - * Created: Fri Mar 19 14:30:16 1999 by faith@valinux.com - * - * Copyright 1999, 2000 Precision Insight, Inc., Cedar Park, Texas. - * Copyright 2000 VA Linux Systems, Inc., Sunnyvale, California. - * All Rights Reserved. - * - * Permission is hereby granted, free of charge, to any person obtaining a - * copy of this software and associated documentation files (the "Software"), - * to deal in the Software without restriction, including without limitation - * the rights to use, copy, modify, merge, publish, distribute, sublicense, - * and/or sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following conditions: - * - * The above copyright notice and this permission notice (including the next - * paragraph) shall be included in all copies or substantial portions of the - * Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR - * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, - * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL - * VA LINUX SYSTEMS AND/OR ITS SUPPLIERS BE LIABLE FOR ANY CLAIM, DAMAGES OR - * OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, - * ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. - * - * Authors: - * Rickard E. (Rik) Faith - * Gareth Hughes - */ - - -/* Gamma-specific code pulled from drm_dma.h: - */ - -void DRM(clear_next_buffer)(drm_device_t *dev) -{ - drm_device_dma_t *dma = dev->dma; - - dma->next_buffer = NULL; - if (dma->next_queue && !DRM_BUFCOUNT(&dma->next_queue->waitlist)) { - wake_up_interruptible(&dma->next_queue->flush_queue); - } - dma->next_queue = NULL; -} - -int DRM(select_queue)(drm_device_t *dev, void (*wrapper)(unsigned long)) -{ - int i; - int candidate = -1; - int j = jiffies; - - if (!dev) { - DRM_ERROR("No device\n"); - return -1; - } - if (!dev->queuelist || !dev->queuelist[DRM_KERNEL_CONTEXT]) { - /* This only happens between the time the - interrupt is initialized and the time - the queues are initialized. */ - return -1; - } - - /* Doing "while locked" DMA? */ - if (DRM_WAITCOUNT(dev, DRM_KERNEL_CONTEXT)) { - return DRM_KERNEL_CONTEXT; - } - - /* If there are buffers on the last_context - queue, and we have not been executing - this context very long, continue to - execute this context. */ - if (dev->last_switch <= j - && dev->last_switch + DRM_TIME_SLICE > j - && DRM_WAITCOUNT(dev, dev->last_context)) { - return dev->last_context; - } - - /* Otherwise, find a candidate */ - for (i = dev->last_checked + 1; i < dev->queue_count; i++) { - if (DRM_WAITCOUNT(dev, i)) { - candidate = dev->last_checked = i; - break; - } - } - - if (candidate < 0) { - for (i = 0; i < dev->queue_count; i++) { - if (DRM_WAITCOUNT(dev, i)) { - candidate = dev->last_checked = i; - break; - } - } - } - - if (wrapper - && candidate >= 0 - && candidate != dev->last_context - && dev->last_switch <= j - && dev->last_switch + DRM_TIME_SLICE > j) { - if (dev->timer.expires != dev->last_switch + DRM_TIME_SLICE) { - del_timer(&dev->timer); - dev->timer.function = wrapper; - dev->timer.data = (unsigned long)dev; - dev->timer.expires = dev->last_switch+DRM_TIME_SLICE; - add_timer(&dev->timer); - } - return -1; - } - - return candidate; -} - - -int DRM(dma_enqueue)(struct file *filp, drm_dma_t *d) -{ - drm_file_t *priv = filp->private_data; - drm_device_t *dev = priv->dev; - int i; - drm_queue_t *q; - drm_buf_t *buf; - int idx; - int while_locked = 0; - drm_device_dma_t *dma = dev->dma; - int *ind; - int err; - DECLARE_WAITQUEUE(entry, current); - - DRM_DEBUG("%d\n", d->send_count); - - if (d->flags & _DRM_DMA_WHILE_LOCKED) { - int context = dev->lock.hw_lock->lock; - - if (!_DRM_LOCK_IS_HELD(context)) { - DRM_ERROR("No lock held during \"while locked\"" - " request\n"); - return -EINVAL; - } - if (d->context != _DRM_LOCKING_CONTEXT(context) - && _DRM_LOCKING_CONTEXT(context) != DRM_KERNEL_CONTEXT) { - DRM_ERROR("Lock held by %d while %d makes" - " \"while locked\" request\n", - _DRM_LOCKING_CONTEXT(context), - d->context); - return -EINVAL; - } - q = dev->queuelist[DRM_KERNEL_CONTEXT]; - while_locked = 1; - } else { - q = dev->queuelist[d->context]; - } - - - atomic_inc(&q->use_count); - if (atomic_read(&q->block_write)) { - add_wait_queue(&q->write_queue, &entry); - atomic_inc(&q->block_count); - for (;;) { - current->state = TASK_INTERRUPTIBLE; - if (!atomic_read(&q->block_write)) break; - schedule(); - if (signal_pending(current)) { - atomic_dec(&q->use_count); - remove_wait_queue(&q->write_queue, &entry); - return -EINTR; - } - } - atomic_dec(&q->block_count); - current->state = TASK_RUNNING; - remove_wait_queue(&q->write_queue, &entry); - } - - ind = DRM(alloc)(d->send_count * sizeof(int), DRM_MEM_DRIVER); - if (!ind) - return -ENOMEM; - - if (copy_from_user(ind, d->send_indices, d->send_count * sizeof(int))) { - err = -EFAULT; - goto out; - } - - err = -EINVAL; - for (i = 0; i < d->send_count; i++) { - idx = ind[i]; - if (idx < 0 || idx >= dma->buf_count) { - DRM_ERROR("Index %d (of %d max)\n", - ind[i], dma->buf_count - 1); - goto out; - } - buf = dma->buflist[ idx ]; - if (buf->filp != filp) { - DRM_ERROR("Process %d using buffer not owned\n", - current->pid); - goto out; - } - if (buf->list != DRM_LIST_NONE) { - DRM_ERROR("Process %d using buffer %d on list %d\n", - current->pid, buf->idx, buf->list); - goto out; - } - buf->used = ind[i]; - buf->while_locked = while_locked; - buf->context = d->context; - if (!buf->used) { - DRM_ERROR("Queueing 0 length buffer\n"); - } - if (buf->pending) { - DRM_ERROR("Queueing pending buffer:" - " buffer %d, offset %d\n", - ind[i], i); - goto out; - } - if (buf->waiting) { - DRM_ERROR("Queueing waiting buffer:" - " buffer %d, offset %d\n", - ind[i], i); - goto out; - } - buf->waiting = 1; - if (atomic_read(&q->use_count) == 1 - || atomic_read(&q->finalization)) { - DRM(free_buffer)(dev, buf); - } else { - DRM(waitlist_put)(&q->waitlist, buf); - atomic_inc(&q->total_queued); - } - } - atomic_dec(&q->use_count); - - return 0; - -out: - DRM(free)(ind, d->send_count * sizeof(int), DRM_MEM_DRIVER); - atomic_dec(&q->use_count); - return err; -} - -static int DRM(dma_get_buffers_of_order)(struct file *filp, drm_dma_t *d, - int order) -{ - drm_file_t *priv = filp->private_data; - drm_device_t *dev = priv->dev; - int i; - drm_buf_t *buf; - drm_device_dma_t *dma = dev->dma; - - for (i = d->granted_count; i < d->request_count; i++) { - buf = DRM(freelist_get)(&dma->bufs[order].freelist, - d->flags & _DRM_DMA_WAIT); - if (!buf) break; - if (buf->pending || buf->waiting) { - DRM_ERROR("Free buffer %d in use: filp %p (w%d, p%d)\n", - buf->idx, - buf->filp, - buf->waiting, - buf->pending); - } - buf->filp = filp; - if (copy_to_user(&d->request_indices[i], - &buf->idx, - sizeof(buf->idx))) - return -EFAULT; - - if (copy_to_user(&d->request_sizes[i], - &buf->total, - sizeof(buf->total))) - return -EFAULT; - - ++d->granted_count; - } - return 0; -} - - -int DRM(dma_get_buffers)(struct file *filp, drm_dma_t *dma) -{ - int order; - int retcode = 0; - int tmp_order; - - order = DRM(order)(dma->request_size); - - dma->granted_count = 0; - retcode = DRM(dma_get_buffers_of_order)(filp, dma, order); - - if (dma->granted_count < dma->request_count - && (dma->flags & _DRM_DMA_SMALLER_OK)) { - for (tmp_order = order - 1; - !retcode - && dma->granted_count < dma->request_count - && tmp_order >= DRM_MIN_ORDER; - --tmp_order) { - - retcode = DRM(dma_get_buffers_of_order)(filp, dma, - tmp_order); - } - } - - if (dma->granted_count < dma->request_count - && (dma->flags & _DRM_DMA_LARGER_OK)) { - for (tmp_order = order + 1; - !retcode - && dma->granted_count < dma->request_count - && tmp_order <= DRM_MAX_ORDER; - ++tmp_order) { - - retcode = DRM(dma_get_buffers_of_order)(filp, dma, - tmp_order); - } - } - return 0; -} - -- cgit v1.2.3 From aa0ca6b4bb818406d4769edb9ff115500c8e4090 Mon Sep 17 00:00:00 2001 From: Dave Airlie Date: Fri, 5 Aug 2005 23:09:14 +1000 Subject: drm: fix warning in drm_pci.c Signed-off-by: Adrian Bunk Signed-off-by: Dave Airlie --- drivers/char/drm/drm_pci.c | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-) diff --git a/drivers/char/drm/drm_pci.c b/drivers/char/drm/drm_pci.c index 3e452e8967f..09ed712c1a7 100644 --- a/drivers/char/drm/drm_pci.c +++ b/drivers/char/drm/drm_pci.c @@ -50,7 +50,7 @@ drm_dma_handle_t *drm_pci_alloc(drm_device_t * dev, size_t size, size_t align, dma_addr_t maxaddr) { drm_dma_handle_t *dmah; -#if DRM_DEBUG_MEMORY +#ifdef DRM_DEBUG_MEMORY int area = DRM_MEM_DMA; spin_lock(&drm_mem_lock); @@ -81,7 +81,7 @@ drm_dma_handle_t *drm_pci_alloc(drm_device_t * dev, size_t size, size_t align, dmah->size = size; dmah->vaddr = pci_alloc_consistent(dev->pdev, size, &dmah->busaddr); -#if DRM_DEBUG_MEMORY +#ifdef DRM_DEBUG_MEMORY if (dmah->vaddr == NULL) { spin_lock(&drm_mem_lock); ++drm_mem_stats[area].fail_count; @@ -116,14 +116,14 @@ EXPORT_SYMBOL(drm_pci_alloc); void __drm_pci_free(drm_device_t * dev, drm_dma_handle_t *dmah) { -#if DRM_DEBUG_MEMORY +#ifdef DRM_DEBUG_MEMORY int area = DRM_MEM_DMA; int alloc_count; int free_count; #endif if (!dmah->vaddr) { -#if DRM_DEBUG_MEMORY +#ifdef DRM_DEBUG_MEMORY DRM_MEM_ERROR(area, "Attempt to free address 0\n"); #endif } else { @@ -131,7 +131,7 @@ __drm_pci_free(drm_device_t * dev, drm_dma_handle_t *dmah) dmah->busaddr); } -#if DRM_DEBUG_MEMORY +#ifdef DRM_DEBUG_MEMORY spin_lock(&drm_mem_lock); free_count = ++drm_mem_stats[area].free_count; alloc_count = drm_mem_stats[area].succeed_count; -- cgit v1.2.3 From d27c9b548ad79c14830c57355dbe3a35f970532a Mon Sep 17 00:00:00 2001 From: Dave Airlie Date: Sun, 7 Aug 2005 15:19:58 +1000 Subject: drm: remove version.h and any version checks.. This patch removes all the drm kernel conditionals from the kernel DRM tree. Signed-off-by: Dave Airlie --- drivers/char/drm/drmP.h | 34 -------------------------------- drivers/char/drm/drm_bufs.c | 16 --------------- drivers/char/drm/drm_vm.c | 47 --------------------------------------------- drivers/char/drm/i810_dma.c | 5 ----- drivers/char/drm/i830_dma.c | 5 ----- 5 files changed, 107 deletions(-) diff --git a/drivers/char/drm/drmP.h b/drivers/char/drm/drmP.h index 0a435899697..6f98701dfe1 100644 --- a/drivers/char/drm/drmP.h +++ b/drivers/char/drm/drmP.h @@ -53,7 +53,6 @@ #include #include #include -#include #include #include /* For (un)lock_kernel */ #include @@ -161,36 +160,7 @@ #define pte_unmap(pte) #endif -#if LINUX_VERSION_CODE < KERNEL_VERSION(2,4,19) -static inline struct page * vmalloc_to_page(void * vmalloc_addr) -{ - unsigned long addr = (unsigned long) vmalloc_addr; - struct page *page = NULL; - pgd_t *pgd = pgd_offset_k(addr); - pmd_t *pmd; - pte_t *ptep, pte; - - if (!pgd_none(*pgd)) { - pmd = pmd_offset(pgd, addr); - if (!pmd_none(*pmd)) { - preempt_disable(); - ptep = pte_offset_map(pmd, addr); - pte = *ptep; - if (pte_present(pte)) - page = pte_page(pte); - pte_unmap(ptep); - preempt_enable(); - } - } - return page; -} -#endif - -#if LINUX_VERSION_CODE < KERNEL_VERSION(2,5,0) -#define DRM_RPR_ARG(vma) -#else #define DRM_RPR_ARG(vma) vma, -#endif #define VM_OFFSET(vma) ((vma)->vm_pgoff << PAGE_SHIFT) @@ -746,11 +716,7 @@ typedef struct drm_device { int pci_slot; /**< PCI slot number */ int pci_func; /**< PCI function number */ #ifdef __alpha__ -#if LINUX_VERSION_CODE < KERNEL_VERSION(2,4,3) - struct pci_controler *hose; -#else struct pci_controller *hose; -#endif #endif drm_sg_mem_t *sg; /**< Scatter gather memory */ unsigned long *ctx_bitmap; /**< context bitmap */ diff --git a/drivers/char/drm/drm_bufs.c b/drivers/char/drm/drm_bufs.c index d1e0b106c26..b70802035d9 100644 --- a/drivers/char/drm/drm_bufs.c +++ b/drivers/char/drm/drm_bufs.c @@ -1499,34 +1499,18 @@ int drm_mapbufs( struct inode *inode, struct file *filp, goto done; } -#if LINUX_VERSION_CODE <= 0x020402 - down( ¤t->mm->mmap_sem ); -#else down_write( ¤t->mm->mmap_sem ); -#endif virtual = do_mmap( filp, 0, map->size, PROT_READ | PROT_WRITE, MAP_SHARED, token ); -#if LINUX_VERSION_CODE <= 0x020402 - up( ¤t->mm->mmap_sem ); -#else up_write( ¤t->mm->mmap_sem ); -#endif } else { -#if LINUX_VERSION_CODE <= 0x020402 - down( ¤t->mm->mmap_sem ); -#else down_write( ¤t->mm->mmap_sem ); -#endif virtual = do_mmap( filp, 0, dma->byte_count, PROT_READ | PROT_WRITE, MAP_SHARED, 0 ); -#if LINUX_VERSION_CODE <= 0x020402 - up( ¤t->mm->mmap_sem ); -#else up_write( ¤t->mm->mmap_sem ); -#endif } if ( virtual > -1024UL ) { /* Real error */ diff --git a/drivers/char/drm/drm_vm.c b/drivers/char/drm/drm_vm.c index 99b5c86f751..292fa7167b2 100644 --- a/drivers/char/drm/drm_vm.c +++ b/drivers/char/drm/drm_vm.c @@ -314,8 +314,6 @@ static __inline__ struct page *drm_do_vm_sg_nopage(struct vm_area_struct *vma, } -#if LINUX_VERSION_CODE > KERNEL_VERSION(2,6,0) - static struct page *drm_vm_nopage(struct vm_area_struct *vma, unsigned long address, int *type) { @@ -344,35 +342,6 @@ static struct page *drm_vm_sg_nopage(struct vm_area_struct *vma, return drm_do_vm_sg_nopage(vma, address); } -#else /* LINUX_VERSION_CODE <= KERNEL_VERSION(2,6,0) */ - -static struct page *drm_vm_nopage(struct vm_area_struct *vma, - unsigned long address, - int unused) { - return drm_do_vm_nopage(vma, address); -} - -static struct page *drm_vm_shm_nopage(struct vm_area_struct *vma, - unsigned long address, - int unused) { - return drm_do_vm_shm_nopage(vma, address); -} - -static struct page *drm_vm_dma_nopage(struct vm_area_struct *vma, - unsigned long address, - int unused) { - return drm_do_vm_dma_nopage(vma, address); -} - -static struct page *drm_vm_sg_nopage(struct vm_area_struct *vma, - unsigned long address, - int unused) { - return drm_do_vm_sg_nopage(vma, address); -} - -#endif - - /** AGP virtual memory operations */ static struct vm_operations_struct drm_vm_ops = { .nopage = drm_vm_nopage, @@ -496,11 +465,7 @@ static int drm_mmap_dma(struct file *filp, struct vm_area_struct *vma) vma->vm_ops = &drm_vm_dma_ops; -#if LINUX_VERSION_CODE <= 0x02040e /* KERNEL_VERSION(2,4,14) */ - vma->vm_flags |= VM_LOCKED | VM_SHM; /* Don't swap */ -#else vma->vm_flags |= VM_RESERVED; /* Don't swap */ -#endif vma->vm_file = filp; /* Needed for drm_vm_open() */ drm_vm_open(vma); @@ -660,29 +625,17 @@ int drm_mmap(struct file *filp, struct vm_area_struct *vma) vma->vm_private_data = (void *)map; /* Don't let this area swap. Change when DRM_KERNEL advisory is supported. */ -#if LINUX_VERSION_CODE <= 0x02040e /* KERNEL_VERSION(2,4,14) */ - vma->vm_flags |= VM_LOCKED; -#else vma->vm_flags |= VM_RESERVED; -#endif break; case _DRM_SCATTER_GATHER: vma->vm_ops = &drm_vm_sg_ops; vma->vm_private_data = (void *)map; -#if LINUX_VERSION_CODE <= 0x02040e /* KERNEL_VERSION(2,4,14) */ - vma->vm_flags |= VM_LOCKED; -#else vma->vm_flags |= VM_RESERVED; -#endif break; default: return -EINVAL; /* This should never happen. */ } -#if LINUX_VERSION_CODE <= 0x02040e /* KERNEL_VERSION(2,4,14) */ - vma->vm_flags |= VM_LOCKED | VM_SHM; /* Don't swap */ -#else vma->vm_flags |= VM_RESERVED; /* Don't swap */ -#endif vma->vm_file = filp; /* Needed for drm_vm_open() */ drm_vm_open(vma); diff --git a/drivers/char/drm/i810_dma.c b/drivers/char/drm/i810_dma.c index f9fd5abd774..2f1659b96fd 100644 --- a/drivers/char/drm/i810_dma.c +++ b/drivers/char/drm/i810_dma.c @@ -45,11 +45,6 @@ #define I810_BUF_UNMAPPED 0 #define I810_BUF_MAPPED 1 -#if LINUX_VERSION_CODE <= KERNEL_VERSION(2,4,2) -#define down_write down -#define up_write up -#endif - static drm_buf_t *i810_freelist_get(drm_device_t *dev) { drm_device_dma_t *dma = dev->dma; diff --git a/drivers/char/drm/i830_dma.c b/drivers/char/drm/i830_dma.c index 697cefccd00..6f89d5796ef 100644 --- a/drivers/char/drm/i830_dma.c +++ b/drivers/char/drm/i830_dma.c @@ -47,11 +47,6 @@ #define I830_BUF_UNMAPPED 0 #define I830_BUF_MAPPED 1 -#if LINUX_VERSION_CODE <= KERNEL_VERSION(2,4,2) -#define down_write down -#define up_write up -#endif - static drm_buf_t *i830_freelist_get(drm_device_t *dev) { drm_device_dma_t *dma = dev->dma; -- cgit v1.2.3 From 282a16749ba63256bcdce2766817f46aaac4dc20 Mon Sep 17 00:00:00 2001 From: Dave Airlie Date: Sun, 7 Aug 2005 15:43:54 +1000 Subject: drm: add savage driver Add driver for savage chipsets. From: Felix Kuehling Signed-off-by: Dave Airlie --- drivers/char/drm/Kconfig | 7 + drivers/char/drm/Makefile | 3 + drivers/char/drm/savage_bci.c | 1096 +++++++++++++++++++++++++++++++++++++ drivers/char/drm/savage_drm.h | 209 +++++++ drivers/char/drm/savage_drv.c | 112 ++++ drivers/char/drm/savage_drv.h | 579 ++++++++++++++++++++ drivers/char/drm/savage_state.c | 1146 +++++++++++++++++++++++++++++++++++++++ 7 files changed, 3152 insertions(+) create mode 100644 drivers/char/drm/savage_bci.c create mode 100644 drivers/char/drm/savage_drm.h create mode 100644 drivers/char/drm/savage_drv.c create mode 100644 drivers/char/drm/savage_drv.h create mode 100644 drivers/char/drm/savage_state.c diff --git a/drivers/char/drm/Kconfig b/drivers/char/drm/Kconfig index f31b9706ef6..56ace9d5e2a 100644 --- a/drivers/char/drm/Kconfig +++ b/drivers/char/drm/Kconfig @@ -96,3 +96,10 @@ config DRM_VIA Choose this option if you have a Via unichrome or compatible video chipset. If M is selected the module will be called via. +config DRM_SAVAGE + tristate "Savage video cards" + depends on DRM + help + Choose this option if you have a Savage3D/4/SuperSavage/Pro/Twister + chipset. If M is selected the module will be called savage. + diff --git a/drivers/char/drm/Makefile b/drivers/char/drm/Makefile index 3f0cf8e9cc5..1945138cb8f 100644 --- a/drivers/char/drm/Makefile +++ b/drivers/char/drm/Makefile @@ -17,6 +17,7 @@ i915-objs := i915_drv.o i915_dma.o i915_irq.o i915_mem.o radeon-objs := radeon_drv.o radeon_cp.o radeon_state.o radeon_mem.o radeon_irq.o ffb-objs := ffb_drv.o ffb_context.o sis-objs := sis_drv.o sis_ds.o sis_mm.o +savage-objs := savage_drv.o savage_bci.o savage_state.o via-objs := via_irq.o via_drv.o via_ds.o via_map.o via_mm.o via_dma.o via_verifier.o via_video.o ifeq ($(CONFIG_COMPAT),y) @@ -37,5 +38,7 @@ obj-$(CONFIG_DRM_I830) += i830.o obj-$(CONFIG_DRM_I915) += i915.o obj-$(CONFIG_DRM_FFB) += ffb.o obj-$(CONFIG_DRM_SIS) += sis.o +obj-$(CONFIG_DRM_SAVAGE)+= savage.o obj-$(CONFIG_DRM_VIA) +=via.o + diff --git a/drivers/char/drm/savage_bci.c b/drivers/char/drm/savage_bci.c new file mode 100644 index 00000000000..2fd40bac7c9 --- /dev/null +++ b/drivers/char/drm/savage_bci.c @@ -0,0 +1,1096 @@ +/* savage_bci.c -- BCI support for Savage + * + * Copyright 2004 Felix Kuehling + * All Rights Reserved. + * + * Permission is hereby granted, free of charge, to any person obtaining a + * copy of this software and associated documentation files (the "Software"), + * to deal in the Software without restriction, including without limitation + * the rights to use, copy, modify, merge, publish, distribute, sub license, + * and/or sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice (including the + * next paragraph) shall be included in all copies or substantial portions + * of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF + * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NON-INFRINGEMENT. IN NO EVENT SHALL FELIX KUEHLING BE LIABLE FOR + * ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF + * CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION + * WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE. + */ +#include "drmP.h" +#include "savage_drm.h" +#include "savage_drv.h" + +/* Need a long timeout for shadow status updates can take a while + * and so can waiting for events when the queue is full. */ +#define SAVAGE_DEFAULT_USEC_TIMEOUT 1000000 /* 1s */ +#define SAVAGE_EVENT_USEC_TIMEOUT 5000000 /* 5s */ +#define SAVAGE_FREELIST_DEBUG 0 + +static int +savage_bci_wait_fifo_shadow(drm_savage_private_t *dev_priv, unsigned int n) +{ + uint32_t mask = dev_priv->status_used_mask; + uint32_t threshold = dev_priv->bci_threshold_hi; + uint32_t status; + int i; + +#if SAVAGE_BCI_DEBUG + if (n > dev_priv->cob_size + SAVAGE_BCI_FIFO_SIZE - threshold) + DRM_ERROR("Trying to emit %d words " + "(more than guaranteed space in COB)\n", n); +#endif + + for (i = 0; i < SAVAGE_DEFAULT_USEC_TIMEOUT; i++) { + DRM_MEMORYBARRIER(); + status = dev_priv->status_ptr[0]; + if ((status & mask) < threshold) + return 0; + DRM_UDELAY(1); + } + +#if SAVAGE_BCI_DEBUG + DRM_ERROR("failed!\n"); + DRM_INFO(" status=0x%08x, threshold=0x%08x\n", status, threshold); +#endif + return DRM_ERR(EBUSY); +} + +static int +savage_bci_wait_fifo_s3d(drm_savage_private_t *dev_priv, unsigned int n) +{ + uint32_t maxUsed = dev_priv->cob_size + SAVAGE_BCI_FIFO_SIZE - n; + uint32_t status; + int i; + + for (i = 0; i < SAVAGE_DEFAULT_USEC_TIMEOUT; i++) { + status = SAVAGE_READ(SAVAGE_STATUS_WORD0); + if ((status & SAVAGE_FIFO_USED_MASK_S3D) <= maxUsed) + return 0; + DRM_UDELAY(1); + } + +#if SAVAGE_BCI_DEBUG + DRM_ERROR("failed!\n"); + DRM_INFO(" status=0x%08x\n", status); +#endif + return DRM_ERR(EBUSY); +} + +static int +savage_bci_wait_fifo_s4(drm_savage_private_t *dev_priv, unsigned int n) +{ + uint32_t maxUsed = dev_priv->cob_size + SAVAGE_BCI_FIFO_SIZE - n; + uint32_t status; + int i; + + for (i = 0; i < SAVAGE_DEFAULT_USEC_TIMEOUT; i++) { + status = SAVAGE_READ(SAVAGE_ALT_STATUS_WORD0); + if ((status & SAVAGE_FIFO_USED_MASK_S4) <= maxUsed) + return 0; + DRM_UDELAY(1); + } + +#if SAVAGE_BCI_DEBUG + DRM_ERROR("failed!\n"); + DRM_INFO(" status=0x%08x\n", status); +#endif + return DRM_ERR(EBUSY); +} + +/* + * Waiting for events. + * + * The BIOSresets the event tag to 0 on mode changes. Therefore we + * never emit 0 to the event tag. If we find a 0 event tag we know the + * BIOS stomped on it and return success assuming that the BIOS waited + * for engine idle. + * + * Note: if the Xserver uses the event tag it has to follow the same + * rule. Otherwise there may be glitches every 2^16 events. + */ +static int +savage_bci_wait_event_shadow(drm_savage_private_t *dev_priv, uint16_t e) +{ + uint32_t status; + int i; + + for (i = 0; i < SAVAGE_EVENT_USEC_TIMEOUT; i++) { + DRM_MEMORYBARRIER(); + status = dev_priv->status_ptr[1]; + if ((((status & 0xffff) - e) & 0xffff) <= 0x7fff || + (status & 0xffff) == 0) + return 0; + DRM_UDELAY(1); + } + +#if SAVAGE_BCI_DEBUG + DRM_ERROR("failed!\n"); + DRM_INFO(" status=0x%08x, e=0x%04x\n", status, e); +#endif + + return DRM_ERR(EBUSY); +} + +static int +savage_bci_wait_event_reg(drm_savage_private_t *dev_priv, uint16_t e) +{ + uint32_t status; + int i; + + for (i = 0; i < SAVAGE_EVENT_USEC_TIMEOUT; i++) { + status = SAVAGE_READ(SAVAGE_STATUS_WORD1); + if ((((status & 0xffff) - e) & 0xffff) <= 0x7fff || + (status & 0xffff) == 0) + return 0; + DRM_UDELAY(1); + } + +#if SAVAGE_BCI_DEBUG + DRM_ERROR("failed!\n"); + DRM_INFO(" status=0x%08x, e=0x%04x\n", status, e); +#endif + + return DRM_ERR(EBUSY); +} + +uint16_t savage_bci_emit_event(drm_savage_private_t *dev_priv, + unsigned int flags) +{ + uint16_t count; + BCI_LOCALS; + + if (dev_priv->status_ptr) { + /* coordinate with Xserver */ + count = dev_priv->status_ptr[1023]; + if (count < dev_priv->event_counter) + dev_priv->event_wrap++; + } else { + count = dev_priv->event_counter; + } + count = (count + 1) & 0xffff; + if (count == 0) { + count++; /* See the comment above savage_wait_event_*. */ + dev_priv->event_wrap++; + } + dev_priv->event_counter = count; + if (dev_priv->status_ptr) + dev_priv->status_ptr[1023] = (uint32_t)count; + + if ((flags & (SAVAGE_WAIT_2D | SAVAGE_WAIT_3D))) { + unsigned int wait_cmd = BCI_CMD_WAIT; + if ((flags & SAVAGE_WAIT_2D)) + wait_cmd |= BCI_CMD_WAIT_2D; + if ((flags & SAVAGE_WAIT_3D)) + wait_cmd |= BCI_CMD_WAIT_3D; + BEGIN_BCI(2); + BCI_WRITE(wait_cmd); + } else { + BEGIN_BCI(1); + } + BCI_WRITE(BCI_CMD_UPDATE_EVENT_TAG | (uint32_t)count); + + return count; +} + +/* + * Freelist management + */ +static int savage_freelist_init(drm_device_t *dev) +{ + drm_savage_private_t *dev_priv = dev->dev_private; + drm_device_dma_t *dma = dev->dma; + drm_buf_t *buf; + drm_savage_buf_priv_t *entry; + int i; + DRM_DEBUG("count=%d\n", dma->buf_count); + + dev_priv->head.next = &dev_priv->tail; + dev_priv->head.prev = NULL; + dev_priv->head.buf = NULL; + + dev_priv->tail.next = NULL; + dev_priv->tail.prev = &dev_priv->head; + dev_priv->tail.buf = NULL; + + for (i = 0; i < dma->buf_count; i++) { + buf = dma->buflist[i]; + entry = buf->dev_private; + + SET_AGE(&entry->age, 0, 0); + entry->buf = buf; + + entry->next = dev_priv->head.next; + entry->prev = &dev_priv->head; + dev_priv->head.next->prev = entry; + dev_priv->head.next = entry; + } + + return 0; +} + +static drm_buf_t *savage_freelist_get(drm_device_t *dev) +{ + drm_savage_private_t *dev_priv = dev->dev_private; + drm_savage_buf_priv_t *tail = dev_priv->tail.prev; + uint16_t event; + unsigned int wrap; + DRM_DEBUG("\n"); + + UPDATE_EVENT_COUNTER(); + if (dev_priv->status_ptr) + event = dev_priv->status_ptr[1] & 0xffff; + else + event = SAVAGE_READ(SAVAGE_STATUS_WORD1) & 0xffff; + wrap = dev_priv->event_wrap; + if (event > dev_priv->event_counter) + wrap--; /* hardware hasn't passed the last wrap yet */ + + DRM_DEBUG(" tail=0x%04x %d\n", tail->age.event, tail->age.wrap); + DRM_DEBUG(" head=0x%04x %d\n", event, wrap); + + if (tail->buf && (TEST_AGE(&tail->age, event, wrap) || event == 0)) { + drm_savage_buf_priv_t *next = tail->next; + drm_savage_buf_priv_t *prev = tail->prev; + prev->next = next; + next->prev = prev; + tail->next = tail->prev = NULL; + return tail->buf; + } + + DRM_DEBUG("returning NULL, tail->buf=%p!\n", tail->buf); + return NULL; +} + +void savage_freelist_put(drm_device_t *dev, drm_buf_t *buf) +{ + drm_savage_private_t *dev_priv = dev->dev_private; + drm_savage_buf_priv_t *entry = buf->dev_private, *prev, *next; + + DRM_DEBUG("age=0x%04x wrap=%d\n", entry->age.event, entry->age.wrap); + + if (entry->next != NULL || entry->prev != NULL) { + DRM_ERROR("entry already on freelist.\n"); + return; + } + + prev = &dev_priv->head; + next = prev->next; + prev->next = entry; + next->prev = entry; + entry->prev = prev; + entry->next = next; +} + +/* + * Command DMA + */ +static int savage_dma_init(drm_savage_private_t *dev_priv) +{ + unsigned int i; + + dev_priv->nr_dma_pages = dev_priv->cmd_dma->size / + (SAVAGE_DMA_PAGE_SIZE*4); + dev_priv->dma_pages = drm_alloc(sizeof(drm_savage_dma_page_t) * + dev_priv->nr_dma_pages, + DRM_MEM_DRIVER); + if (dev_priv->dma_pages == NULL) + return DRM_ERR(ENOMEM); + + for (i = 0; i < dev_priv->nr_dma_pages; ++i) { + SET_AGE(&dev_priv->dma_pages[i].age, 0, 0); + dev_priv->dma_pages[i].used = 0; + dev_priv->dma_pages[i].flushed = 0; + } + SET_AGE(&dev_priv->last_dma_age, 0, 0); + + dev_priv->first_dma_page = 0; + dev_priv->current_dma_page = 0; + + return 0; +} + +void savage_dma_reset(drm_savage_private_t *dev_priv) +{ + uint16_t event; + unsigned int wrap, i; + event = savage_bci_emit_event(dev_priv, 0); + wrap = dev_priv->event_wrap; + for (i = 0; i < dev_priv->nr_dma_pages; ++i) { + SET_AGE(&dev_priv->dma_pages[i].age, event, wrap); + dev_priv->dma_pages[i].used = 0; + dev_priv->dma_pages[i].flushed = 0; + } + SET_AGE(&dev_priv->last_dma_age, event, wrap); + dev_priv->first_dma_page = dev_priv->current_dma_page = 0; +} + +void savage_dma_wait(drm_savage_private_t *dev_priv, unsigned int page) +{ + uint16_t event; + unsigned int wrap; + + /* Faked DMA buffer pages don't age. */ + if (dev_priv->cmd_dma == &dev_priv->fake_dma) + return; + + UPDATE_EVENT_COUNTER(); + if (dev_priv->status_ptr) + event = dev_priv->status_ptr[1] & 0xffff; + else + event = SAVAGE_READ(SAVAGE_STATUS_WORD1) & 0xffff; + wrap = dev_priv->event_wrap; + if (event > dev_priv->event_counter) + wrap--; /* hardware hasn't passed the last wrap yet */ + + if (dev_priv->dma_pages[page].age.wrap > wrap || + (dev_priv->dma_pages[page].age.wrap == wrap && + dev_priv->dma_pages[page].age.event > event)) { + if (dev_priv->wait_evnt(dev_priv, + dev_priv->dma_pages[page].age.event) + < 0) + DRM_ERROR("wait_evnt failed!\n"); + } +} + +uint32_t *savage_dma_alloc(drm_savage_private_t *dev_priv, unsigned int n) +{ + unsigned int cur = dev_priv->current_dma_page; + unsigned int rest = SAVAGE_DMA_PAGE_SIZE - + dev_priv->dma_pages[cur].used; + unsigned int nr_pages = (n - rest + SAVAGE_DMA_PAGE_SIZE-1) / + SAVAGE_DMA_PAGE_SIZE; + uint32_t *dma_ptr; + unsigned int i; + + DRM_DEBUG("cur=%u, cur->used=%u, n=%u, rest=%u, nr_pages=%u\n", + cur, dev_priv->dma_pages[cur].used, n, rest, nr_pages); + + if (cur + nr_pages < dev_priv->nr_dma_pages) { + dma_ptr = (uint32_t *)dev_priv->cmd_dma->handle + + cur*SAVAGE_DMA_PAGE_SIZE + + dev_priv->dma_pages[cur].used; + if (n < rest) + rest = n; + dev_priv->dma_pages[cur].used += rest; + n -= rest; + cur++; + } else { + dev_priv->dma_flush(dev_priv); + nr_pages = (n + SAVAGE_DMA_PAGE_SIZE-1) / SAVAGE_DMA_PAGE_SIZE; + for (i = cur; i < dev_priv->nr_dma_pages; ++i) { + dev_priv->dma_pages[i].age = dev_priv->last_dma_age; + dev_priv->dma_pages[i].used = 0; + dev_priv->dma_pages[i].flushed = 0; + } + dma_ptr = (uint32_t *)dev_priv->cmd_dma->handle; + dev_priv->first_dma_page = cur = 0; + } + for (i = cur; nr_pages > 0; ++i, --nr_pages) { +#if SAVAGE_DMA_DEBUG + if (dev_priv->dma_pages[i].used) { + DRM_ERROR("unflushed page %u: used=%u\n", + i, dev_priv->dma_pages[i].used); + } +#endif + if (n > SAVAGE_DMA_PAGE_SIZE) + dev_priv->dma_pages[i].used = SAVAGE_DMA_PAGE_SIZE; + else + dev_priv->dma_pages[i].used = n; + n -= SAVAGE_DMA_PAGE_SIZE; + } + dev_priv->current_dma_page = --i; + + DRM_DEBUG("cur=%u, cur->used=%u, n=%u\n", + i, dev_priv->dma_pages[i].used, n); + + savage_dma_wait(dev_priv, dev_priv->current_dma_page); + + return dma_ptr; +} + +static void savage_dma_flush(drm_savage_private_t *dev_priv) +{ + unsigned int first = dev_priv->first_dma_page; + unsigned int cur = dev_priv->current_dma_page; + uint16_t event; + unsigned int wrap, pad, align, len, i; + unsigned long phys_addr; + BCI_LOCALS; + + if (first == cur && + dev_priv->dma_pages[cur].used == dev_priv->dma_pages[cur].flushed) + return; + + /* pad length to multiples of 2 entries + * align start of next DMA block to multiles of 8 entries */ + pad = -dev_priv->dma_pages[cur].used & 1; + align = -(dev_priv->dma_pages[cur].used + pad) & 7; + + DRM_DEBUG("first=%u, cur=%u, first->flushed=%u, cur->used=%u, " + "pad=%u, align=%u\n", + first, cur, dev_priv->dma_pages[first].flushed, + dev_priv->dma_pages[cur].used, pad, align); + + /* pad with noops */ + if (pad) { + uint32_t *dma_ptr = (uint32_t *)dev_priv->cmd_dma->handle + + cur * SAVAGE_DMA_PAGE_SIZE + + dev_priv->dma_pages[cur].used; + dev_priv->dma_pages[cur].used += pad; + while(pad != 0) { + *dma_ptr++ = BCI_CMD_WAIT; + pad--; + } + } + + DRM_MEMORYBARRIER(); + + /* do flush ... */ + phys_addr = dev_priv->cmd_dma->offset + + (first * SAVAGE_DMA_PAGE_SIZE + + dev_priv->dma_pages[first].flushed) * 4; + len = (cur - first) * SAVAGE_DMA_PAGE_SIZE + + dev_priv->dma_pages[cur].used - + dev_priv->dma_pages[first].flushed; + + DRM_DEBUG("phys_addr=%lx, len=%u\n", + phys_addr | dev_priv->dma_type, len); + + BEGIN_BCI(3); + BCI_SET_REGISTERS(SAVAGE_DMABUFADDR, 1); + BCI_WRITE(phys_addr | dev_priv->dma_type); + BCI_DMA(len); + + /* fix alignment of the start of the next block */ + dev_priv->dma_pages[cur].used += align; + + /* age DMA pages */ + event = savage_bci_emit_event(dev_priv, 0); + wrap = dev_priv->event_wrap; + for (i = first; i < cur; ++i) { + SET_AGE(&dev_priv->dma_pages[i].age, event, wrap); + dev_priv->dma_pages[i].used = 0; + dev_priv->dma_pages[i].flushed = 0; + } + /* age the current page only when it's full */ + if (dev_priv->dma_pages[cur].used == SAVAGE_DMA_PAGE_SIZE) { + SET_AGE(&dev_priv->dma_pages[cur].age, event, wrap); + dev_priv->dma_pages[cur].used = 0; + dev_priv->dma_pages[cur].flushed = 0; + /* advance to next page */ + cur++; + if (cur == dev_priv->nr_dma_pages) + cur = 0; + dev_priv->first_dma_page = dev_priv->current_dma_page = cur; + } else { + dev_priv->first_dma_page = cur; + dev_priv->dma_pages[cur].flushed = dev_priv->dma_pages[i].used; + } + SET_AGE(&dev_priv->last_dma_age, event, wrap); + + DRM_DEBUG("first=cur=%u, cur->used=%u, cur->flushed=%u\n", cur, + dev_priv->dma_pages[cur].used, + dev_priv->dma_pages[cur].flushed); +} + +static void savage_fake_dma_flush(drm_savage_private_t *dev_priv) +{ + unsigned int i, j; + BCI_LOCALS; + + if (dev_priv->first_dma_page == dev_priv->current_dma_page && + dev_priv->dma_pages[dev_priv->current_dma_page].used == 0) + return; + + DRM_DEBUG("first=%u, cur=%u, cur->used=%u\n", + dev_priv->first_dma_page, dev_priv->current_dma_page, + dev_priv->dma_pages[dev_priv->current_dma_page].used); + + for (i = dev_priv->first_dma_page; + i <= dev_priv->current_dma_page && dev_priv->dma_pages[i].used; + ++i) { + uint32_t *dma_ptr = (uint32_t *)dev_priv->cmd_dma->handle + + i * SAVAGE_DMA_PAGE_SIZE; +#if SAVAGE_DMA_DEBUG + /* Sanity check: all pages except the last one must be full. */ + if (i < dev_priv->current_dma_page && + dev_priv->dma_pages[i].used != SAVAGE_DMA_PAGE_SIZE) { + DRM_ERROR("partial DMA page %u: used=%u", + i, dev_priv->dma_pages[i].used); + } +#endif + BEGIN_BCI(dev_priv->dma_pages[i].used); + for (j = 0; j < dev_priv->dma_pages[i].used; ++j) { + BCI_WRITE(dma_ptr[j]); + } + dev_priv->dma_pages[i].used = 0; + } + + /* reset to first page */ + dev_priv->first_dma_page = dev_priv->current_dma_page = 0; +} + +/* + * Initalize mappings. On Savage4 and SavageIX the alignment + * and size of the aperture is not suitable for automatic MTRR setup + * in drm_addmap. Therefore we do it manually before the maps are + * initialized. We also need to take care of deleting the MTRRs in + * postcleanup. + */ +int savage_preinit(drm_device_t *dev, unsigned long chipset) +{ + drm_savage_private_t *dev_priv; + unsigned long mmio_base, fb_base, fb_size, aperture_base; + /* fb_rsrc and aper_rsrc aren't really used currently, but still exist + * in case we decide we need information on the BAR for BSD in the + * future. + */ + unsigned int fb_rsrc, aper_rsrc; + int ret = 0; + + dev_priv = drm_alloc(sizeof(drm_savage_private_t), DRM_MEM_DRIVER); + if (dev_priv == NULL) + return DRM_ERR(ENOMEM); + + memset(dev_priv, 0, sizeof(drm_savage_private_t)); + dev->dev_private = (void *)dev_priv; + dev_priv->chipset = (enum savage_family)chipset; + + dev_priv->mtrr[0].handle = -1; + dev_priv->mtrr[1].handle = -1; + dev_priv->mtrr[2].handle = -1; + if (S3_SAVAGE3D_SERIES(dev_priv->chipset)) { + fb_rsrc = 0; + fb_base = drm_get_resource_start(dev, 0); + fb_size = SAVAGE_FB_SIZE_S3; + mmio_base = fb_base + SAVAGE_FB_SIZE_S3; + aper_rsrc = 0; + aperture_base = fb_base + SAVAGE_APERTURE_OFFSET; + /* this should always be true */ + if (drm_get_resource_len(dev, 0) == 0x08000000) { + /* Don't make MMIO write-cobining! We need 3 + * MTRRs. */ + dev_priv->mtrr[0].base = fb_base; + dev_priv->mtrr[0].size = 0x01000000; + dev_priv->mtrr[0].handle = mtrr_add( + dev_priv->mtrr[0].base, dev_priv->mtrr[0].size, + MTRR_TYPE_WRCOMB, 1); + dev_priv->mtrr[1].base = fb_base+0x02000000; + dev_priv->mtrr[1].size = 0x02000000; + dev_priv->mtrr[1].handle = mtrr_add( + dev_priv->mtrr[1].base, dev_priv->mtrr[1].size, + MTRR_TYPE_WRCOMB, 1); + dev_priv->mtrr[2].base = fb_base+0x04000000; + dev_priv->mtrr[2].size = 0x04000000; + dev_priv->mtrr[2].handle = mtrr_add( + dev_priv->mtrr[2].base, dev_priv->mtrr[2].size, + MTRR_TYPE_WRCOMB, 1); + } else { + DRM_ERROR("strange pci_resource_len %08lx\n", + drm_get_resource_len(dev, 0)); + } + } else if (chipset != S3_SUPERSAVAGE && chipset != S3_SAVAGE2000) { + mmio_base = drm_get_resource_start(dev, 0); + fb_rsrc = 1; + fb_base = drm_get_resource_start(dev, 1); + fb_size = SAVAGE_FB_SIZE_S4; + aper_rsrc = 1; + aperture_base = fb_base + SAVAGE_APERTURE_OFFSET; + /* this should always be true */ + if (drm_get_resource_len(dev, 1) == 0x08000000) { + /* Can use one MTRR to cover both fb and + * aperture. */ + dev_priv->mtrr[0].base = fb_base; + dev_priv->mtrr[0].size = 0x08000000; + dev_priv->mtrr[0].handle = mtrr_add( + dev_priv->mtrr[0].base, dev_priv->mtrr[0].size, + MTRR_TYPE_WRCOMB, 1); + } else { + DRM_ERROR("strange pci_resource_len %08lx\n", + drm_get_resource_len(dev, 1)); + } + } else { + mmio_base = drm_get_resource_start(dev, 0); + fb_rsrc = 1; + fb_base = drm_get_resource_start(dev, 1); + fb_size = drm_get_resource_len(dev, 1); + aper_rsrc = 2; + aperture_base = drm_get_resource_start(dev, 2); + /* Automatic MTRR setup will do the right thing. */ + } + + ret = drm_addmap(dev, mmio_base, SAVAGE_MMIO_SIZE, _DRM_REGISTERS, + _DRM_READ_ONLY, &dev_priv->mmio); + if (ret) + return ret; + + ret = drm_addmap(dev, fb_base, fb_size, _DRM_FRAME_BUFFER, + _DRM_WRITE_COMBINING, &dev_priv->fb); + if (ret) + return ret; + + ret = drm_addmap(dev, aperture_base, SAVAGE_APERTURE_SIZE, + _DRM_FRAME_BUFFER, _DRM_WRITE_COMBINING, + &dev_priv->aperture); + if (ret) + return ret; + + return ret; +} + +/* + * Delete MTRRs and free device-private data. + */ +int savage_postcleanup(drm_device_t *dev) +{ + drm_savage_private_t *dev_priv = dev->dev_private; + int i; + + for (i = 0; i < 3; ++i) + if (dev_priv->mtrr[i].handle >= 0) + mtrr_del(dev_priv->mtrr[i].handle, + dev_priv->mtrr[i].base, + dev_priv->mtrr[i].size); + + drm_free(dev_priv, sizeof(drm_savage_private_t), DRM_MEM_DRIVER); + + return 0; +} + +static int savage_do_init_bci(drm_device_t *dev, drm_savage_init_t *init) +{ + drm_savage_private_t *dev_priv = dev->dev_private; + + if (init->fb_bpp != 16 && init->fb_bpp != 32) { + DRM_ERROR("invalid frame buffer bpp %d!\n", init->fb_bpp); + return DRM_ERR(EINVAL); + } + if (init->depth_bpp != 16 && init->depth_bpp != 32) { + DRM_ERROR("invalid depth buffer bpp %d!\n", init->fb_bpp); + return DRM_ERR(EINVAL); + } + if (init->dma_type != SAVAGE_DMA_AGP && + init->dma_type != SAVAGE_DMA_PCI) { + DRM_ERROR("invalid dma memory type %d!\n", init->dma_type); + return DRM_ERR(EINVAL); + } + + dev_priv->cob_size = init->cob_size; + dev_priv->bci_threshold_lo = init->bci_threshold_lo; + dev_priv->bci_threshold_hi = init->bci_threshold_hi; + dev_priv->dma_type = init->dma_type; + + dev_priv->fb_bpp = init->fb_bpp; + dev_priv->front_offset = init->front_offset; + dev_priv->front_pitch = init->front_pitch; + dev_priv->back_offset = init->back_offset; + dev_priv->back_pitch = init->back_pitch; + dev_priv->depth_bpp = init->depth_bpp; + dev_priv->depth_offset = init->depth_offset; + dev_priv->depth_pitch = init->depth_pitch; + + dev_priv->texture_offset = init->texture_offset; + dev_priv->texture_size = init->texture_size; + + DRM_GETSAREA(); + if (!dev_priv->sarea) { + DRM_ERROR("could not find sarea!\n"); + savage_do_cleanup_bci(dev); + return DRM_ERR(EINVAL); + } + if (init->status_offset != 0) { + dev_priv->status = drm_core_findmap(dev, init->status_offset); + if (!dev_priv->status) { + DRM_ERROR("could not find shadow status region!\n"); + savage_do_cleanup_bci(dev); + return DRM_ERR(EINVAL); + } + } else { + dev_priv->status = NULL; + } + if (dev_priv->dma_type == SAVAGE_DMA_AGP && init->buffers_offset) { + dev->agp_buffer_map = drm_core_findmap(dev, + init->buffers_offset); + if (!dev->agp_buffer_map) { + DRM_ERROR("could not find DMA buffer region!\n"); + savage_do_cleanup_bci(dev); + return DRM_ERR(EINVAL); + } + drm_core_ioremap(dev->agp_buffer_map, dev); + if (!dev->agp_buffer_map) { + DRM_ERROR("failed to ioremap DMA buffer region!\n"); + savage_do_cleanup_bci(dev); + return DRM_ERR(ENOMEM); + } + } + if (init->agp_textures_offset) { + dev_priv->agp_textures = + drm_core_findmap(dev, init->agp_textures_offset); + if (!dev_priv->agp_textures) { + DRM_ERROR("could not find agp texture region!\n"); + savage_do_cleanup_bci(dev); + return DRM_ERR(EINVAL); + } + } else { + dev_priv->agp_textures = NULL; + } + + if (init->cmd_dma_offset) { + if (S3_SAVAGE3D_SERIES(dev_priv->chipset)) { + DRM_ERROR("command DMA not supported on " + "Savage3D/MX/IX.\n"); + savage_do_cleanup_bci(dev); + return DRM_ERR(EINVAL); + } + if (dev->dma && dev->dma->buflist) { + DRM_ERROR("command and vertex DMA not supported " + "at the same time.\n"); + savage_do_cleanup_bci(dev); + return DRM_ERR(EINVAL); + } + dev_priv->cmd_dma = drm_core_findmap(dev, init->cmd_dma_offset); + if (!dev_priv->cmd_dma) { + DRM_ERROR("could not find command DMA region!\n"); + savage_do_cleanup_bci(dev); + return DRM_ERR(EINVAL); + } + if (dev_priv->dma_type == SAVAGE_DMA_AGP) { + if (dev_priv->cmd_dma->type != _DRM_AGP) { + DRM_ERROR("AGP command DMA region is not a " + "_DRM_AGP map!\n"); + savage_do_cleanup_bci(dev); + return DRM_ERR(EINVAL); + } + drm_core_ioremap(dev_priv->cmd_dma, dev); + if (!dev_priv->cmd_dma->handle) { + DRM_ERROR("failed to ioremap command " + "DMA region!\n"); + savage_do_cleanup_bci(dev); + return DRM_ERR(ENOMEM); + } + } else if (dev_priv->cmd_dma->type != _DRM_CONSISTENT) { + DRM_ERROR("PCI command DMA region is not a " + "_DRM_CONSISTENT map!\n"); + savage_do_cleanup_bci(dev); + return DRM_ERR(EINVAL); + } + } else { + dev_priv->cmd_dma = NULL; + } + + dev_priv->dma_flush = savage_dma_flush; + if (!dev_priv->cmd_dma) { + DRM_DEBUG("falling back to faked command DMA.\n"); + dev_priv->fake_dma.offset = 0; + dev_priv->fake_dma.size = SAVAGE_FAKE_DMA_SIZE; + dev_priv->fake_dma.type = _DRM_SHM; + dev_priv->fake_dma.handle = drm_alloc(SAVAGE_FAKE_DMA_SIZE, + DRM_MEM_DRIVER); + if (!dev_priv->fake_dma.handle) { + DRM_ERROR("could not allocate faked DMA buffer!\n"); + savage_do_cleanup_bci(dev); + return DRM_ERR(ENOMEM); + } + dev_priv->cmd_dma = &dev_priv->fake_dma; + dev_priv->dma_flush = savage_fake_dma_flush; + } + + dev_priv->sarea_priv = + (drm_savage_sarea_t *)((uint8_t *)dev_priv->sarea->handle + + init->sarea_priv_offset); + + /* setup bitmap descriptors */ + { + unsigned int color_tile_format; + unsigned int depth_tile_format; + unsigned int front_stride, back_stride, depth_stride; + if (dev_priv->chipset <= S3_SAVAGE4) { + color_tile_format = dev_priv->fb_bpp == 16 ? + SAVAGE_BD_TILE_16BPP : SAVAGE_BD_TILE_32BPP; + depth_tile_format = dev_priv->depth_bpp == 16 ? + SAVAGE_BD_TILE_16BPP : SAVAGE_BD_TILE_32BPP; + } else { + color_tile_format = SAVAGE_BD_TILE_DEST; + depth_tile_format = SAVAGE_BD_TILE_DEST; + } + front_stride = dev_priv->front_pitch / (dev_priv->fb_bpp/8); + back_stride = dev_priv-> back_pitch / (dev_priv->fb_bpp/8); + depth_stride = dev_priv->depth_pitch / (dev_priv->depth_bpp/8); + + dev_priv->front_bd = front_stride | SAVAGE_BD_BW_DISABLE | + (dev_priv->fb_bpp << SAVAGE_BD_BPP_SHIFT) | + (color_tile_format << SAVAGE_BD_TILE_SHIFT); + + dev_priv-> back_bd = back_stride | SAVAGE_BD_BW_DISABLE | + (dev_priv->fb_bpp << SAVAGE_BD_BPP_SHIFT) | + (color_tile_format << SAVAGE_BD_TILE_SHIFT); + + dev_priv->depth_bd = depth_stride | SAVAGE_BD_BW_DISABLE | + (dev_priv->depth_bpp << SAVAGE_BD_BPP_SHIFT) | + (depth_tile_format << SAVAGE_BD_TILE_SHIFT); + } + + /* setup status and bci ptr */ + dev_priv->event_counter = 0; + dev_priv->event_wrap = 0; + dev_priv->bci_ptr = (volatile uint32_t *) + ((uint8_t *)dev_priv->mmio->handle + SAVAGE_BCI_OFFSET); + if (S3_SAVAGE3D_SERIES(dev_priv->chipset)) { + dev_priv->status_used_mask = SAVAGE_FIFO_USED_MASK_S3D; + } else { + dev_priv->status_used_mask = SAVAGE_FIFO_USED_MASK_S4; + } + if (dev_priv->status != NULL) { + dev_priv->status_ptr = + (volatile uint32_t *)dev_priv->status->handle; + dev_priv->wait_fifo = savage_bci_wait_fifo_shadow; + dev_priv->wait_evnt = savage_bci_wait_event_shadow; + dev_priv->status_ptr[1023] = dev_priv->event_counter; + } else { + dev_priv->status_ptr = NULL; + if (S3_SAVAGE3D_SERIES(dev_priv->chipset)) { + dev_priv->wait_fifo = savage_bci_wait_fifo_s3d; + } else { + dev_priv->wait_fifo = savage_bci_wait_fifo_s4; + } + dev_priv->wait_evnt = savage_bci_wait_event_reg; + } + + /* cliprect functions */ + if (S3_SAVAGE3D_SERIES(dev_priv->chipset)) + dev_priv->emit_clip_rect = savage_emit_clip_rect_s3d; + else + dev_priv->emit_clip_rect = savage_emit_clip_rect_s4; + + if (savage_freelist_init(dev) < 0) { + DRM_ERROR("could not initialize freelist\n"); + savage_do_cleanup_bci(dev); + return DRM_ERR(ENOMEM); + } + + if (savage_dma_init(dev_priv) < 0) { + DRM_ERROR("could not initialize command DMA\n"); + savage_do_cleanup_bci(dev); + return DRM_ERR(ENOMEM); + } + + return 0; +} + +int savage_do_cleanup_bci(drm_device_t *dev) +{ + drm_savage_private_t *dev_priv = dev->dev_private; + + if (dev_priv->cmd_dma == &dev_priv->fake_dma) { + if (dev_priv->fake_dma.handle) + drm_free(dev_priv->fake_dma.handle, + SAVAGE_FAKE_DMA_SIZE, DRM_MEM_DRIVER); + } else if (dev_priv->cmd_dma && dev_priv->cmd_dma->handle && + dev_priv->cmd_dma->type == _DRM_AGP && + dev_priv->dma_type == SAVAGE_DMA_AGP) + drm_core_ioremapfree(dev_priv->cmd_dma, dev); + + if (dev_priv->dma_type == SAVAGE_DMA_AGP && + dev->agp_buffer_map && dev->agp_buffer_map->handle) { + drm_core_ioremapfree(dev->agp_buffer_map, dev); + /* make sure the next instance (which may be running + * in PCI mode) doesn't try to use an old + * agp_buffer_map. */ + dev->agp_buffer_map = NULL; + } + + if (dev_priv->dma_pages) + drm_free(dev_priv->dma_pages, + sizeof(drm_savage_dma_page_t)*dev_priv->nr_dma_pages, + DRM_MEM_DRIVER); + + return 0; +} + +static int savage_bci_init(DRM_IOCTL_ARGS) +{ + DRM_DEVICE; + drm_savage_init_t init; + + LOCK_TEST_WITH_RETURN(dev, filp); + + DRM_COPY_FROM_USER_IOCTL(init, (drm_savage_init_t __user *)data, + sizeof(init)); + + switch (init.func) { + case SAVAGE_INIT_BCI: + return savage_do_init_bci(dev, &init); + case SAVAGE_CLEANUP_BCI: + return savage_do_cleanup_bci(dev); + } + + return DRM_ERR(EINVAL); +} + +static int savage_bci_event_emit(DRM_IOCTL_ARGS) +{ + DRM_DEVICE; + drm_savage_private_t *dev_priv = dev->dev_private; + drm_savage_event_emit_t event; + + DRM_DEBUG("\n"); + + LOCK_TEST_WITH_RETURN(dev, filp); + + DRM_COPY_FROM_USER_IOCTL(event, (drm_savage_event_emit_t __user *)data, + sizeof(event)); + + event.count = savage_bci_emit_event(dev_priv, event.flags); + event.count |= dev_priv->event_wrap << 16; + DRM_COPY_TO_USER_IOCTL(&((drm_savage_event_emit_t __user *)data)->count, + event.count, sizeof(event.count)); + return 0; +} + +static int savage_bci_event_wait(DRM_IOCTL_ARGS) +{ + DRM_DEVICE; + drm_savage_private_t *dev_priv = dev->dev_private; + drm_savage_event_wait_t event; + unsigned int event_e, hw_e; + unsigned int event_w, hw_w; + + DRM_DEBUG("\n"); + + DRM_COPY_FROM_USER_IOCTL(event, (drm_savage_event_wait_t __user *)data, + sizeof(event)); + + UPDATE_EVENT_COUNTER(); + if (dev_priv->status_ptr) + hw_e = dev_priv->status_ptr[1] & 0xffff; + else + hw_e = SAVAGE_READ(SAVAGE_STATUS_WORD1) & 0xffff; + hw_w = dev_priv->event_wrap; + if (hw_e > dev_priv->event_counter) + hw_w--; /* hardware hasn't passed the last wrap yet */ + + event_e = event.count & 0xffff; + event_w = event.count >> 16; + + /* Don't need to wait if + * - event counter wrapped since the event was emitted or + * - the hardware has advanced up to or over the event to wait for. + */ + if (event_w < hw_w || (event_w == hw_w && event_e <= hw_e) ) + return 0; + else + return dev_priv->wait_evnt(dev_priv, event_e); +} + +/* + * DMA buffer management + */ + +static int savage_bci_get_buffers(DRMFILE filp, drm_device_t *dev, drm_dma_t *d) +{ + drm_buf_t *buf; + int i; + + for (i = d->granted_count; i < d->request_count; i++) { + buf = savage_freelist_get(dev); + if (!buf) + return DRM_ERR(EAGAIN); + + buf->filp = filp; + + if (DRM_COPY_TO_USER(&d->request_indices[i], + &buf->idx, sizeof(buf->idx))) + return DRM_ERR(EFAULT); + if (DRM_COPY_TO_USER(&d->request_sizes[i], + &buf->total, sizeof(buf->total))) + return DRM_ERR(EFAULT); + + d->granted_count++; + } + return 0; +} + +int savage_bci_buffers(DRM_IOCTL_ARGS) +{ + DRM_DEVICE; + drm_device_dma_t *dma = dev->dma; + drm_dma_t d; + int ret = 0; + + LOCK_TEST_WITH_RETURN(dev, filp); + + DRM_COPY_FROM_USER_IOCTL(d, (drm_dma_t __user *)data, sizeof(d)); + + /* Please don't send us buffers. + */ + if (d.send_count != 0) { + DRM_ERROR("Process %d trying to send %d buffers via drmDMA\n", + DRM_CURRENTPID, d.send_count); + return DRM_ERR(EINVAL); + } + + /* We'll send you buffers. + */ + if (d.request_count < 0 || d.request_count > dma->buf_count) { + DRM_ERROR("Process %d trying to get %d buffers (of %d max)\n", + DRM_CURRENTPID, d.request_count, dma->buf_count); + return DRM_ERR(EINVAL); + } + + d.granted_count = 0; + + if (d.request_count) { + ret = savage_bci_get_buffers(filp, dev, &d); + } + + DRM_COPY_TO_USER_IOCTL((drm_dma_t __user *)data, d, sizeof(d)); + + return ret; +} + +void savage_reclaim_buffers(drm_device_t *dev, DRMFILE filp) { + drm_device_dma_t *dma = dev->dma; + drm_savage_private_t *dev_priv = dev->dev_private; + int i; + + if (!dma) + return; + if (!dev_priv) + return; + if (!dma->buflist) + return; + + /*i830_flush_queue(dev);*/ + + for (i = 0; i < dma->buf_count; i++) { + drm_buf_t *buf = dma->buflist[i]; + drm_savage_buf_priv_t *buf_priv = buf->dev_private; + + if (buf->filp == filp && buf_priv && + buf_priv->next == NULL && buf_priv->prev == NULL) { + uint16_t event; + DRM_DEBUG("reclaimed from client\n"); + event = savage_bci_emit_event(dev_priv, SAVAGE_WAIT_3D); + SET_AGE(&buf_priv->age, event, dev_priv->event_wrap); + savage_freelist_put(dev, buf); + } + } + + drm_core_reclaim_buffers(dev, filp); +} + + +drm_ioctl_desc_t savage_ioctls[] = { + [DRM_IOCTL_NR(DRM_SAVAGE_BCI_INIT)] = {savage_bci_init, 1, 1}, + [DRM_IOCTL_NR(DRM_SAVAGE_BCI_CMDBUF)] = {savage_bci_cmdbuf, 1, 0}, + [DRM_IOCTL_NR(DRM_SAVAGE_BCI_EVENT_EMIT)] = {savage_bci_event_emit, 1, 0}, + [DRM_IOCTL_NR(DRM_SAVAGE_BCI_EVENT_WAIT)] = {savage_bci_event_wait, 1, 0}, +}; + +int savage_max_ioctl = DRM_ARRAY_SIZE(savage_ioctls); diff --git a/drivers/char/drm/savage_drm.h b/drivers/char/drm/savage_drm.h new file mode 100644 index 00000000000..6526c9aa758 --- /dev/null +++ b/drivers/char/drm/savage_drm.h @@ -0,0 +1,209 @@ +/* savage_drm.h -- Public header for the savage driver + * + * Copyright 2004 Felix Kuehling + * All Rights Reserved. + * + * Permission is hereby granted, free of charge, to any person obtaining a + * copy of this software and associated documentation files (the "Software"), + * to deal in the Software without restriction, including without limitation + * the rights to use, copy, modify, merge, publish, distribute, sub license, + * and/or sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice (including the + * next paragraph) shall be included in all copies or substantial portions + * of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF + * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NON-INFRINGEMENT. IN NO EVENT SHALL FELIX KUEHLING BE LIABLE FOR + * ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF + * CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION + * WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE. + */ + +#ifndef __SAVAGE_DRM_H__ +#define __SAVAGE_DRM_H__ + +#ifndef __SAVAGE_SAREA_DEFINES__ +#define __SAVAGE_SAREA_DEFINES__ + +/* 2 heaps (1 for card, 1 for agp), each divided into upto 128 + * regions, subject to a minimum region size of (1<<16) == 64k. + * + * Clients may subdivide regions internally, but when sharing between + * clients, the region size is the minimum granularity. + */ + +#define SAVAGE_CARD_HEAP 0 +#define SAVAGE_AGP_HEAP 1 +#define SAVAGE_NR_TEX_HEAPS 2 +#define SAVAGE_NR_TEX_REGIONS 16 +#define SAVAGE_LOG_MIN_TEX_REGION_SIZE 16 + +#endif /* __SAVAGE_SAREA_DEFINES__ */ + +typedef struct _drm_savage_sarea { + /* LRU lists for texture memory in agp space and on the card. + */ + drm_tex_region_t texList[SAVAGE_NR_TEX_HEAPS][SAVAGE_NR_TEX_REGIONS+1]; + unsigned int texAge[SAVAGE_NR_TEX_HEAPS]; + + /* Mechanism to validate card state. + */ + int ctxOwner; +} drm_savage_sarea_t, *drm_savage_sarea_ptr; + +/* Savage-specific ioctls + */ +#define DRM_SAVAGE_BCI_INIT 0x00 +#define DRM_SAVAGE_BCI_CMDBUF 0x01 +#define DRM_SAVAGE_BCI_EVENT_EMIT 0x02 +#define DRM_SAVAGE_BCI_EVENT_WAIT 0x03 + +#define DRM_IOCTL_SAVAGE_INIT DRM_IOW( DRM_COMMAND_BASE + DRM_SAVAGE_BCI_INIT, drm_savage_init_t) +#define DRM_IOCTL_SAVAGE_CMDBUF DRM_IOW( DRM_COMMAND_BASE + DRM_SAVAGE_BCI_CMDBUF, drm_savage_cmdbuf_t) +#define DRM_IOCTL_SAVAGE_EVENT_EMIT DRM_IOWR(DRM_COMMAND_BASE + DRM_SAVAGE_BCI_EVENT_EMIT, drm_savage_event_emit_t) +#define DRM_IOCTL_SAVAGE_EVENT_WAIT DRM_IOW( DRM_COMMAND_BASE + DRM_SAVAGE_BCI_EVENT_WAIT, drm_savage_event_wait_t) + +#define SAVAGE_DMA_PCI 1 +#define SAVAGE_DMA_AGP 3 +typedef struct drm_savage_init { + enum { + SAVAGE_INIT_BCI = 1, + SAVAGE_CLEANUP_BCI = 2 + } func; + unsigned int sarea_priv_offset; + + /* some parameters */ + unsigned int cob_size; + unsigned int bci_threshold_lo, bci_threshold_hi; + unsigned int dma_type; + + /* frame buffer layout */ + unsigned int fb_bpp; + unsigned int front_offset, front_pitch; + unsigned int back_offset, back_pitch; + unsigned int depth_bpp; + unsigned int depth_offset, depth_pitch; + + /* local textures */ + unsigned int texture_offset; + unsigned int texture_size; + + /* physical locations of non-permanent maps */ + unsigned long status_offset; + unsigned long buffers_offset; + unsigned long agp_textures_offset; + unsigned long cmd_dma_offset; +} drm_savage_init_t; + +typedef union drm_savage_cmd_header drm_savage_cmd_header_t; +typedef struct drm_savage_cmdbuf { + /* command buffer in client's address space */ + drm_savage_cmd_header_t __user *cmd_addr; + unsigned int size; /* size of the command buffer in 64bit units */ + + unsigned int dma_idx; /* DMA buffer index to use */ + int discard; /* discard DMA buffer when done */ + /* vertex buffer in client's address space */ + unsigned int __user *vb_addr; + unsigned int vb_size; /* size of client vertex buffer in bytes */ + unsigned int vb_stride; /* stride of vertices in 32bit words */ + /* boxes in client's address space */ + drm_clip_rect_t __user *box_addr; + unsigned int nbox; /* number of clipping boxes */ +} drm_savage_cmdbuf_t; + +#define SAVAGE_WAIT_2D 0x1 /* wait for 2D idle before updating event tag */ +#define SAVAGE_WAIT_3D 0x2 /* wait for 3D idle before updating event tag */ +#define SAVAGE_WAIT_IRQ 0x4 /* emit or wait for IRQ, not implemented yet */ +typedef struct drm_savage_event { + unsigned int count; + unsigned int flags; +} drm_savage_event_emit_t, drm_savage_event_wait_t; + +/* Commands for the cmdbuf ioctl + */ +#define SAVAGE_CMD_STATE 0 /* a range of state registers */ +#define SAVAGE_CMD_DMA_PRIM 1 /* vertices from DMA buffer */ +#define SAVAGE_CMD_VB_PRIM 2 /* vertices from client vertex buffer */ +#define SAVAGE_CMD_DMA_IDX 3 /* indexed vertices from DMA buffer */ +#define SAVAGE_CMD_VB_IDX 4 /* indexed vertices client vertex buffer */ +#define SAVAGE_CMD_CLEAR 5 /* clear buffers */ +#define SAVAGE_CMD_SWAP 6 /* swap buffers */ + +/* Primitive types +*/ +#define SAVAGE_PRIM_TRILIST 0 /* triangle list */ +#define SAVAGE_PRIM_TRISTRIP 1 /* triangle strip */ +#define SAVAGE_PRIM_TRIFAN 2 /* triangle fan */ +#define SAVAGE_PRIM_TRILIST_201 3 /* reorder verts for correct flat + * shading on s3d */ + +/* Skip flags (vertex format) + */ +#define SAVAGE_SKIP_Z 0x01 +#define SAVAGE_SKIP_W 0x02 +#define SAVAGE_SKIP_C0 0x04 +#define SAVAGE_SKIP_C1 0x08 +#define SAVAGE_SKIP_S0 0x10 +#define SAVAGE_SKIP_T0 0x20 +#define SAVAGE_SKIP_ST0 0x30 +#define SAVAGE_SKIP_S1 0x40 +#define SAVAGE_SKIP_T1 0x80 +#define SAVAGE_SKIP_ST1 0xc0 +#define SAVAGE_SKIP_ALL_S3D 0x3f +#define SAVAGE_SKIP_ALL_S4 0xff + +/* Buffer names for clear command + */ +#define SAVAGE_FRONT 0x1 +#define SAVAGE_BACK 0x2 +#define SAVAGE_DEPTH 0x4 + +/* 64-bit command header + */ +union drm_savage_cmd_header { + struct { + unsigned char cmd; /* command */ + unsigned char pad0; + unsigned short pad1; + unsigned short pad2; + unsigned short pad3; + } cmd; /* generic */ + struct { + unsigned char cmd; + unsigned char global; /* need idle engine? */ + unsigned short count; /* number of consecutive registers */ + unsigned short start; /* first register */ + unsigned short pad3; + } state; /* SAVAGE_CMD_STATE */ + struct { + unsigned char cmd; + unsigned char prim; /* primitive type */ + unsigned short skip; /* vertex format (skip flags) */ + unsigned short count; /* number of vertices */ + unsigned short start; /* first vertex in DMA/vertex buffer */ + } prim; /* SAVAGE_CMD_DMA_PRIM, SAVAGE_CMD_VB_PRIM */ + struct { + unsigned char cmd; + unsigned char prim; + unsigned short skip; + unsigned short count; /* number of indices that follow */ + unsigned short pad3; + } idx; /* SAVAGE_CMD_DMA_IDX, SAVAGE_CMD_VB_IDX */ + struct { + unsigned char cmd; + unsigned char pad0; + unsigned short pad1; + unsigned int flags; + } clear0; /* SAVAGE_CMD_CLEAR */ + struct { + unsigned int mask; + unsigned int value; + } clear1; /* SAVAGE_CMD_CLEAR data */ +}; + +#endif diff --git a/drivers/char/drm/savage_drv.c b/drivers/char/drm/savage_drv.c new file mode 100644 index 00000000000..ac8d270427c --- /dev/null +++ b/drivers/char/drm/savage_drv.c @@ -0,0 +1,112 @@ +/* savage_drv.c -- Savage driver for Linux + * + * Copyright 2004 Felix Kuehling + * All Rights Reserved. + * + * Permission is hereby granted, free of charge, to any person obtaining a + * copy of this software and associated documentation files (the "Software"), + * to deal in the Software without restriction, including without limitation + * the rights to use, copy, modify, merge, publish, distribute, sub license, + * and/or sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice (including the + * next paragraph) shall be included in all copies or substantial portions + * of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF + * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NON-INFRINGEMENT. IN NO EVENT SHALL FELIX KUEHLING BE LIABLE FOR + * ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF + * CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION + * WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE. + */ + +#include +#include "drmP.h" +#include "savage_drm.h" +#include "savage_drv.h" + +#include "drm_pciids.h" + +static int postinit( struct drm_device *dev, unsigned long flags ) +{ + DRM_INFO( "Initialized %s %d.%d.%d %s on minor %d: %s\n", + DRIVER_NAME, + DRIVER_MAJOR, + DRIVER_MINOR, + DRIVER_PATCHLEVEL, + DRIVER_DATE, + dev->primary.minor, + pci_pretty_name(dev->pdev) + ); + return 0; +} + +static int version( drm_version_t *version ) +{ + int len; + + version->version_major = DRIVER_MAJOR; + version->version_minor = DRIVER_MINOR; + version->version_patchlevel = DRIVER_PATCHLEVEL; + DRM_COPY( version->name, DRIVER_NAME ); + DRM_COPY( version->date, DRIVER_DATE ); + DRM_COPY( version->desc, DRIVER_DESC ); + return 0; +} + +static struct pci_device_id pciidlist[] = { + savage_PCI_IDS +}; + +extern drm_ioctl_desc_t savage_ioctls[]; +extern int savage_max_ioctl; + +static struct drm_driver driver = { + .driver_features = + DRIVER_USE_AGP | DRIVER_USE_MTRR | + DRIVER_HAVE_DMA | DRIVER_PCI_DMA, + .dev_priv_size = sizeof(drm_savage_buf_priv_t), + .preinit = savage_preinit, + .postinit = postinit, + .postcleanup = savage_postcleanup, + .reclaim_buffers = savage_reclaim_buffers, + .get_map_ofs = drm_core_get_map_ofs, + .get_reg_ofs = drm_core_get_reg_ofs, + .version = version, + .ioctls = savage_ioctls, + .dma_ioctl = savage_bci_buffers, + .fops = { + .owner = THIS_MODULE, + .open = drm_open, + .release = drm_release, + .ioctl = drm_ioctl, + .mmap = drm_mmap, + .poll = drm_poll, + .fasync = drm_fasync, + }, + .pci_driver = { + .name = DRIVER_NAME, + .id_table = pciidlist, + } +}; + +static int __init savage_init(void) +{ + driver.num_ioctls = savage_max_ioctl; + return drm_init(&driver); +} + +static void __exit savage_exit(void) +{ + drm_exit(&driver); +} + +module_init(savage_init); +module_exit(savage_exit); + +MODULE_AUTHOR( DRIVER_AUTHOR ); +MODULE_DESCRIPTION( DRIVER_DESC ); +MODULE_LICENSE("GPL and additional rights"); diff --git a/drivers/char/drm/savage_drv.h b/drivers/char/drm/savage_drv.h new file mode 100644 index 00000000000..a4543494465 --- /dev/null +++ b/drivers/char/drm/savage_drv.h @@ -0,0 +1,579 @@ +/* savage_drv.h -- Private header for the savage driver + * + * Copyright 2004 Felix Kuehling + * All Rights Reserved. + * + * Permission is hereby granted, free of charge, to any person obtaining a + * copy of this software and associated documentation files (the "Software"), + * to deal in the Software without restriction, including without limitation + * the rights to use, copy, modify, merge, publish, distribute, sub license, + * and/or sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice (including the + * next paragraph) shall be included in all copies or substantial portions + * of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF + * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NON-INFRINGEMENT. IN NO EVENT SHALL FELIX KUEHLING BE LIABLE FOR + * ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF + * CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION + * WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE. + */ + +#ifndef __SAVAGE_DRV_H__ +#define __SAVAGE_DRV_H__ + +#define DRIVER_AUTHOR "Felix Kuehling" + +#define DRIVER_NAME "savage" +#define DRIVER_DESC "Savage3D/MX/IX, Savage4, SuperSavage, Twister, ProSavage[DDR]" +#define DRIVER_DATE "20050313" + +#define DRIVER_MAJOR 2 +#define DRIVER_MINOR 4 +#define DRIVER_PATCHLEVEL 1 +/* Interface history: + * + * 1.x The DRM driver from the VIA/S3 code drop, basically a dummy + * 2.0 The first real DRM + * 2.1 Scissors registers managed by the DRM, 3D operations clipped by + * cliprects of the cmdbuf ioctl + * 2.2 Implemented SAVAGE_CMD_DMA_IDX and SAVAGE_CMD_VB_IDX + * 2.3 Event counters used by BCI_EVENT_EMIT/WAIT ioctls are now 32 bits + * wide and thus very long lived (unlikely to ever wrap). The size + * in the struct was 32 bits before, but only 16 bits were used + * 2.4 Implemented command DMA. Now drm_savage_init_t.cmd_dma_offset is + * actually used + */ + +typedef struct drm_savage_age { + uint16_t event; + unsigned int wrap; +} drm_savage_age_t; + +typedef struct drm_savage_buf_priv { + struct drm_savage_buf_priv *next; + struct drm_savage_buf_priv *prev; + drm_savage_age_t age; + drm_buf_t *buf; +} drm_savage_buf_priv_t; + +typedef struct drm_savage_dma_page { + drm_savage_age_t age; + unsigned int used, flushed; +} drm_savage_dma_page_t; +#define SAVAGE_DMA_PAGE_SIZE 1024 /* in dwords */ +/* Fake DMA buffer size in bytes. 4 pages. Allows a maximum command + * size of 16kbytes or 4k entries. Minimum requirement would be + * 10kbytes for 255 40-byte vertices in one drawing command. */ +#define SAVAGE_FAKE_DMA_SIZE (SAVAGE_DMA_PAGE_SIZE*4*4) + +/* interesting bits of hardware state that are saved in dev_priv */ +typedef union { + struct drm_savage_common_state { + uint32_t vbaddr; + } common; + struct { + unsigned char pad[sizeof(struct drm_savage_common_state)]; + uint32_t texctrl, texaddr; + uint32_t scstart, new_scstart; + uint32_t scend, new_scend; + } s3d; + struct { + unsigned char pad[sizeof(struct drm_savage_common_state)]; + uint32_t texdescr, texaddr0, texaddr1; + uint32_t drawctrl0, new_drawctrl0; + uint32_t drawctrl1, new_drawctrl1; + } s4; +} drm_savage_state_t; + +/* these chip tags should match the ones in the 2D driver in savage_regs.h. */ +enum savage_family { + S3_UNKNOWN = 0, + S3_SAVAGE3D, + S3_SAVAGE_MX, + S3_SAVAGE4, + S3_PROSAVAGE, + S3_TWISTER, + S3_PROSAVAGEDDR, + S3_SUPERSAVAGE, + S3_SAVAGE2000, + S3_LAST +}; + +#define S3_SAVAGE3D_SERIES(chip) ((chip>=S3_SAVAGE3D) && (chip<=S3_SAVAGE_MX)) + +#define S3_SAVAGE4_SERIES(chip) ((chip==S3_SAVAGE4) \ + || (chip==S3_PROSAVAGE) \ + || (chip==S3_TWISTER) \ + || (chip==S3_PROSAVAGEDDR)) + +#define S3_SAVAGE_MOBILE_SERIES(chip) ((chip==S3_SAVAGE_MX) || (chip==S3_SUPERSAVAGE)) + +#define S3_SAVAGE_SERIES(chip) ((chip>=S3_SAVAGE3D) && (chip<=S3_SAVAGE2000)) + +#define S3_MOBILE_TWISTER_SERIES(chip) ((chip==S3_TWISTER) \ + ||(chip==S3_PROSAVAGEDDR)) + +/* flags */ +#define SAVAGE_IS_AGP 1 + +typedef struct drm_savage_private { + drm_savage_sarea_t *sarea_priv; + + drm_savage_buf_priv_t head, tail; + + /* who am I? */ + enum savage_family chipset; + + unsigned int cob_size; + unsigned int bci_threshold_lo, bci_threshold_hi; + unsigned int dma_type; + + /* frame buffer layout */ + unsigned int fb_bpp; + unsigned int front_offset, front_pitch; + unsigned int back_offset, back_pitch; + unsigned int depth_bpp; + unsigned int depth_offset, depth_pitch; + + /* bitmap descriptors for swap and clear */ + unsigned int front_bd, back_bd, depth_bd; + + /* local textures */ + unsigned int texture_offset; + unsigned int texture_size; + + /* memory regions in physical memory */ + drm_local_map_t *sarea; + drm_local_map_t *mmio; + drm_local_map_t *fb; + drm_local_map_t *aperture; + drm_local_map_t *status; + drm_local_map_t *agp_textures; + drm_local_map_t *cmd_dma; + drm_local_map_t fake_dma; + + struct { + int handle; + unsigned long base, size; + } mtrr[3]; + + /* BCI and status-related stuff */ + volatile uint32_t *status_ptr, *bci_ptr; + uint32_t status_used_mask; + uint16_t event_counter; + unsigned int event_wrap; + + /* Savage4 command DMA */ + drm_savage_dma_page_t *dma_pages; + unsigned int nr_dma_pages, first_dma_page, current_dma_page; + drm_savage_age_t last_dma_age; + + /* saved hw state for global/local check on S3D */ + uint32_t hw_draw_ctrl, hw_zbuf_ctrl; + /* and for scissors (global, so don't emit if not changed) */ + uint32_t hw_scissors_start, hw_scissors_end; + + drm_savage_state_t state; + + /* after emitting a wait cmd Savage3D needs 63 nops before next DMA */ + unsigned int waiting; + + /* config/hardware-dependent function pointers */ + int (*wait_fifo)(struct drm_savage_private *dev_priv, unsigned int n); + int (*wait_evnt)(struct drm_savage_private *dev_priv, uint16_t e); + /* Err, there is a macro wait_event in include/linux/wait.h. + * Avoid unwanted macro expansion. */ + void (*emit_clip_rect)(struct drm_savage_private *dev_priv, + drm_clip_rect_t *pbox); + void (*dma_flush)(struct drm_savage_private *dev_priv); +} drm_savage_private_t; + +/* ioctls */ +extern int savage_bci_cmdbuf(DRM_IOCTL_ARGS); +extern int savage_bci_buffers(DRM_IOCTL_ARGS); + +/* BCI functions */ +extern uint16_t savage_bci_emit_event(drm_savage_private_t *dev_priv, + unsigned int flags); +extern void savage_freelist_put(drm_device_t *dev, drm_buf_t *buf); +extern void savage_dma_reset(drm_savage_private_t *dev_priv); +extern void savage_dma_wait(drm_savage_private_t *dev_priv, unsigned int page); +extern uint32_t *savage_dma_alloc(drm_savage_private_t *dev_priv, + unsigned int n); +extern int savage_preinit(drm_device_t *dev, unsigned long chipset); +extern int savage_postcleanup(drm_device_t *dev); +extern int savage_do_cleanup_bci(drm_device_t *dev); +extern void savage_reclaim_buffers(drm_device_t *dev, DRMFILE filp); + +/* state functions */ +extern void savage_emit_clip_rect_s3d(drm_savage_private_t *dev_priv, + drm_clip_rect_t *pbox); +extern void savage_emit_clip_rect_s4(drm_savage_private_t *dev_priv, + drm_clip_rect_t *pbox); + +#define SAVAGE_FB_SIZE_S3 0x01000000 /* 16MB */ +#define SAVAGE_FB_SIZE_S4 0x02000000 /* 32MB */ +#define SAVAGE_MMIO_SIZE 0x00080000 /* 512kB */ +#define SAVAGE_APERTURE_OFFSET 0x02000000 /* 32MB */ +#define SAVAGE_APERTURE_SIZE 0x05000000 /* 5 tiled surfaces, 16MB each */ + +#define SAVAGE_BCI_OFFSET 0x00010000 /* offset of the BCI region + * inside the MMIO region */ +#define SAVAGE_BCI_FIFO_SIZE 32 /* number of entries in on-chip + * BCI FIFO */ + +/* + * MMIO registers + */ +#define SAVAGE_STATUS_WORD0 0x48C00 +#define SAVAGE_STATUS_WORD1 0x48C04 +#define SAVAGE_ALT_STATUS_WORD0 0x48C60 + +#define SAVAGE_FIFO_USED_MASK_S3D 0x0001ffff +#define SAVAGE_FIFO_USED_MASK_S4 0x001fffff + +/* Copied from savage_bci.h in the 2D driver with some renaming. */ + +/* Bitmap descriptors */ +#define SAVAGE_BD_STRIDE_SHIFT 0 +#define SAVAGE_BD_BPP_SHIFT 16 +#define SAVAGE_BD_TILE_SHIFT 24 +#define SAVAGE_BD_BW_DISABLE (1<<28) +/* common: */ +#define SAVAGE_BD_TILE_LINEAR 0 +/* savage4, MX, IX, 3D */ +#define SAVAGE_BD_TILE_16BPP 2 +#define SAVAGE_BD_TILE_32BPP 3 +/* twister, prosavage, DDR, supersavage, 2000 */ +#define SAVAGE_BD_TILE_DEST 1 +#define SAVAGE_BD_TILE_TEXTURE 2 +/* GBD - BCI enable */ +/* savage4, MX, IX, 3D */ +#define SAVAGE_GBD_BCI_ENABLE 8 +/* twister, prosavage, DDR, supersavage, 2000 */ +#define SAVAGE_GBD_BCI_ENABLE_TWISTER 0 + +#define SAVAGE_GBD_BIG_ENDIAN 4 +#define SAVAGE_GBD_LITTLE_ENDIAN 0 +#define SAVAGE_GBD_64 1 + +/* Global Bitmap Descriptor */ +#define SAVAGE_BCI_GLB_BD_LOW 0x8168 +#define SAVAGE_BCI_GLB_BD_HIGH 0x816C + +/* + * BCI registers + */ +/* Savage4/Twister/ProSavage 3D registers */ +#define SAVAGE_DRAWLOCALCTRL_S4 0x1e +#define SAVAGE_TEXPALADDR_S4 0x1f +#define SAVAGE_TEXCTRL0_S4 0x20 +#define SAVAGE_TEXCTRL1_S4 0x21 +#define SAVAGE_TEXADDR0_S4 0x22 +#define SAVAGE_TEXADDR1_S4 0x23 +#define SAVAGE_TEXBLEND0_S4 0x24 +#define SAVAGE_TEXBLEND1_S4 0x25 +#define SAVAGE_TEXXPRCLR_S4 0x26 /* never used */ +#define SAVAGE_TEXDESCR_S4 0x27 +#define SAVAGE_FOGTABLE_S4 0x28 +#define SAVAGE_FOGCTRL_S4 0x30 +#define SAVAGE_STENCILCTRL_S4 0x31 +#define SAVAGE_ZBUFCTRL_S4 0x32 +#define SAVAGE_ZBUFOFF_S4 0x33 +#define SAVAGE_DESTCTRL_S4 0x34 +#define SAVAGE_DRAWCTRL0_S4 0x35 +#define SAVAGE_DRAWCTRL1_S4 0x36 +#define SAVAGE_ZWATERMARK_S4 0x37 +#define SAVAGE_DESTTEXRWWATERMARK_S4 0x38 +#define SAVAGE_TEXBLENDCOLOR_S4 0x39 +/* Savage3D/MX/IX 3D registers */ +#define SAVAGE_TEXPALADDR_S3D 0x18 +#define SAVAGE_TEXXPRCLR_S3D 0x19 /* never used */ +#define SAVAGE_TEXADDR_S3D 0x1A +#define SAVAGE_TEXDESCR_S3D 0x1B +#define SAVAGE_TEXCTRL_S3D 0x1C +#define SAVAGE_FOGTABLE_S3D 0x20 +#define SAVAGE_FOGCTRL_S3D 0x30 +#define SAVAGE_DRAWCTRL_S3D 0x31 +#define SAVAGE_ZBUFCTRL_S3D 0x32 +#define SAVAGE_ZBUFOFF_S3D 0x33 +#define SAVAGE_DESTCTRL_S3D 0x34 +#define SAVAGE_SCSTART_S3D 0x35 +#define SAVAGE_SCEND_S3D 0x36 +#define SAVAGE_ZWATERMARK_S3D 0x37 +#define SAVAGE_DESTTEXRWWATERMARK_S3D 0x38 +/* common stuff */ +#define SAVAGE_VERTBUFADDR 0x3e +#define SAVAGE_BITPLANEWTMASK 0xd7 +#define SAVAGE_DMABUFADDR 0x51 + +/* texture enable bits (needed for tex addr checking) */ +#define SAVAGE_TEXCTRL_TEXEN_MASK 0x00010000 /* S3D */ +#define SAVAGE_TEXDESCR_TEX0EN_MASK 0x02000000 /* S4 */ +#define SAVAGE_TEXDESCR_TEX1EN_MASK 0x04000000 /* S4 */ + +/* Global fields in Savage4/Twister/ProSavage 3D registers: + * + * All texture registers and DrawLocalCtrl are local. All other + * registers are global. */ + +/* Global fields in Savage3D/MX/IX 3D registers: + * + * All texture registers are local. DrawCtrl and ZBufCtrl are + * partially local. All other registers are global. + * + * DrawCtrl global fields: cullMode, alphaTestCmpFunc, alphaTestEn, alphaRefVal + * ZBufCtrl global fields: zCmpFunc, zBufEn + */ +#define SAVAGE_DRAWCTRL_S3D_GLOBAL 0x03f3c00c +#define SAVAGE_ZBUFCTRL_S3D_GLOBAL 0x00000027 + +/* Masks for scissor bits (drawCtrl[01] on s4, scissorStart/End on s3d) + */ +#define SAVAGE_SCISSOR_MASK_S4 0x00fff7ff +#define SAVAGE_SCISSOR_MASK_S3D 0x07ff07ff + +/* + * BCI commands + */ +#define BCI_CMD_NOP 0x40000000 +#define BCI_CMD_RECT 0x48000000 +#define BCI_CMD_RECT_XP 0x01000000 +#define BCI_CMD_RECT_YP 0x02000000 +#define BCI_CMD_SCANLINE 0x50000000 +#define BCI_CMD_LINE 0x5C000000 +#define BCI_CMD_LINE_LAST_PIXEL 0x58000000 +#define BCI_CMD_BYTE_TEXT 0x63000000 +#define BCI_CMD_NT_BYTE_TEXT 0x67000000 +#define BCI_CMD_BIT_TEXT 0x6C000000 +#define BCI_CMD_GET_ROP(cmd) (((cmd) >> 16) & 0xFF) +#define BCI_CMD_SET_ROP(cmd, rop) ((cmd) |= ((rop & 0xFF) << 16)) +#define BCI_CMD_SEND_COLOR 0x00008000 + +#define BCI_CMD_CLIP_NONE 0x00000000 +#define BCI_CMD_CLIP_CURRENT 0x00002000 +#define BCI_CMD_CLIP_LR 0x00004000 +#define BCI_CMD_CLIP_NEW 0x00006000 + +#define BCI_CMD_DEST_GBD 0x00000000 +#define BCI_CMD_DEST_PBD 0x00000800 +#define BCI_CMD_DEST_PBD_NEW 0x00000C00 +#define BCI_CMD_DEST_SBD 0x00001000 +#define BCI_CMD_DEST_SBD_NEW 0x00001400 + +#define BCI_CMD_SRC_TRANSPARENT 0x00000200 +#define BCI_CMD_SRC_SOLID 0x00000000 +#define BCI_CMD_SRC_GBD 0x00000020 +#define BCI_CMD_SRC_COLOR 0x00000040 +#define BCI_CMD_SRC_MONO 0x00000060 +#define BCI_CMD_SRC_PBD_COLOR 0x00000080 +#define BCI_CMD_SRC_PBD_MONO 0x000000A0 +#define BCI_CMD_SRC_PBD_COLOR_NEW 0x000000C0 +#define BCI_CMD_SRC_PBD_MONO_NEW 0x000000E0 +#define BCI_CMD_SRC_SBD_COLOR 0x00000100 +#define BCI_CMD_SRC_SBD_MONO 0x00000120 +#define BCI_CMD_SRC_SBD_COLOR_NEW 0x00000140 +#define BCI_CMD_SRC_SBD_MONO_NEW 0x00000160 + +#define BCI_CMD_PAT_TRANSPARENT 0x00000010 +#define BCI_CMD_PAT_NONE 0x00000000 +#define BCI_CMD_PAT_COLOR 0x00000002 +#define BCI_CMD_PAT_MONO 0x00000003 +#define BCI_CMD_PAT_PBD_COLOR 0x00000004 +#define BCI_CMD_PAT_PBD_MONO 0x00000005 +#define BCI_CMD_PAT_PBD_COLOR_NEW 0x00000006 +#define BCI_CMD_PAT_PBD_MONO_NEW 0x00000007 +#define BCI_CMD_PAT_SBD_COLOR 0x00000008 +#define BCI_CMD_PAT_SBD_MONO 0x00000009 +#define BCI_CMD_PAT_SBD_COLOR_NEW 0x0000000A +#define BCI_CMD_PAT_SBD_MONO_NEW 0x0000000B + +#define BCI_BD_BW_DISABLE 0x10000000 +#define BCI_BD_TILE_MASK 0x03000000 +#define BCI_BD_TILE_NONE 0x00000000 +#define BCI_BD_TILE_16 0x02000000 +#define BCI_BD_TILE_32 0x03000000 +#define BCI_BD_GET_BPP(bd) (((bd) >> 16) & 0xFF) +#define BCI_BD_SET_BPP(bd, bpp) ((bd) |= (((bpp) & 0xFF) << 16)) +#define BCI_BD_GET_STRIDE(bd) ((bd) & 0xFFFF) +#define BCI_BD_SET_STRIDE(bd, st) ((bd) |= ((st) & 0xFFFF)) + +#define BCI_CMD_SET_REGISTER 0x96000000 + +#define BCI_CMD_WAIT 0xC0000000 +#define BCI_CMD_WAIT_3D 0x00010000 +#define BCI_CMD_WAIT_2D 0x00020000 + +#define BCI_CMD_UPDATE_EVENT_TAG 0x98000000 + +#define BCI_CMD_DRAW_PRIM 0x80000000 +#define BCI_CMD_DRAW_INDEXED_PRIM 0x88000000 +#define BCI_CMD_DRAW_CONT 0x01000000 +#define BCI_CMD_DRAW_TRILIST 0x00000000 +#define BCI_CMD_DRAW_TRISTRIP 0x02000000 +#define BCI_CMD_DRAW_TRIFAN 0x04000000 +#define BCI_CMD_DRAW_SKIPFLAGS 0x000000ff +#define BCI_CMD_DRAW_NO_Z 0x00000001 +#define BCI_CMD_DRAW_NO_W 0x00000002 +#define BCI_CMD_DRAW_NO_CD 0x00000004 +#define BCI_CMD_DRAW_NO_CS 0x00000008 +#define BCI_CMD_DRAW_NO_U0 0x00000010 +#define BCI_CMD_DRAW_NO_V0 0x00000020 +#define BCI_CMD_DRAW_NO_UV0 0x00000030 +#define BCI_CMD_DRAW_NO_U1 0x00000040 +#define BCI_CMD_DRAW_NO_V1 0x00000080 +#define BCI_CMD_DRAW_NO_UV1 0x000000c0 + +#define BCI_CMD_DMA 0xa8000000 + +#define BCI_W_H(w, h) ((((h) << 16) | (w)) & 0x0FFF0FFF) +#define BCI_X_Y(x, y) ((((y) << 16) | (x)) & 0x0FFF0FFF) +#define BCI_X_W(x, y) ((((w) << 16) | (x)) & 0x0FFF0FFF) +#define BCI_CLIP_LR(l, r) ((((r) << 16) | (l)) & 0x0FFF0FFF) +#define BCI_CLIP_TL(t, l) ((((t) << 16) | (l)) & 0x0FFF0FFF) +#define BCI_CLIP_BR(b, r) ((((b) << 16) | (r)) & 0x0FFF0FFF) + +#define BCI_LINE_X_Y(x, y) (((y) << 16) | ((x) & 0xFFFF)) +#define BCI_LINE_STEPS(diag, axi) (((axi) << 16) | ((diag) & 0xFFFF)) +#define BCI_LINE_MISC(maj, ym, xp, yp, err) \ + (((maj) & 0x1FFF) | \ + ((ym) ? 1<<13 : 0) | \ + ((xp) ? 1<<14 : 0) | \ + ((yp) ? 1<<15 : 0) | \ + ((err) << 16)) + +/* + * common commands + */ +#define BCI_SET_REGISTERS( first, n ) \ + BCI_WRITE(BCI_CMD_SET_REGISTER | \ + ((uint32_t)(n) & 0xff) << 16 | \ + ((uint32_t)(first) & 0xffff)) +#define DMA_SET_REGISTERS( first, n ) \ + DMA_WRITE(BCI_CMD_SET_REGISTER | \ + ((uint32_t)(n) & 0xff) << 16 | \ + ((uint32_t)(first) & 0xffff)) + +#define BCI_DRAW_PRIMITIVE(n, type, skip) \ + BCI_WRITE(BCI_CMD_DRAW_PRIM | (type) | (skip) | \ + ((n) << 16)) +#define DMA_DRAW_PRIMITIVE(n, type, skip) \ + DMA_WRITE(BCI_CMD_DRAW_PRIM | (type) | (skip) | \ + ((n) << 16)) + +#define BCI_DRAW_INDICES_S3D(n, type, i0) \ + BCI_WRITE(BCI_CMD_DRAW_INDEXED_PRIM | (type) | \ + ((n) << 16) | (i0)) + +#define BCI_DRAW_INDICES_S4(n, type, skip) \ + BCI_WRITE(BCI_CMD_DRAW_INDEXED_PRIM | (type) | \ + (skip) | ((n) << 16)) + +#define BCI_DMA(n) \ + BCI_WRITE(BCI_CMD_DMA | (((n) >> 1) - 1)) + +/* + * access to MMIO + */ +#define SAVAGE_READ(reg) DRM_READ32( dev_priv->mmio, (reg) ) +#define SAVAGE_WRITE(reg) DRM_WRITE32( dev_priv->mmio, (reg) ) + +/* + * access to the burst command interface (BCI) + */ +#define SAVAGE_BCI_DEBUG 1 + +#define BCI_LOCALS volatile uint32_t *bci_ptr; + +#define BEGIN_BCI( n ) do { \ + dev_priv->wait_fifo(dev_priv, (n)); \ + bci_ptr = dev_priv->bci_ptr; \ +} while(0) + +#define BCI_WRITE( val ) *bci_ptr++ = (uint32_t)(val) + +#define BCI_COPY_FROM_USER(src,n) do { \ + unsigned int i; \ + for (i = 0; i < n; ++i) { \ + uint32_t val; \ + DRM_GET_USER_UNCHECKED(val, &((uint32_t*)(src))[i]); \ + BCI_WRITE(val); \ + } \ +} while(0) + +/* + * command DMA support + */ +#define SAVAGE_DMA_DEBUG 1 + +#define DMA_LOCALS uint32_t *dma_ptr; + +#define BEGIN_DMA( n ) do { \ + unsigned int cur = dev_priv->current_dma_page; \ + unsigned int rest = SAVAGE_DMA_PAGE_SIZE - \ + dev_priv->dma_pages[cur].used; \ + if ((n) > rest) { \ + dma_ptr = savage_dma_alloc(dev_priv, (n)); \ + } else { /* fast path for small allocations */ \ + dma_ptr = (uint32_t *)dev_priv->cmd_dma->handle + \ + cur * SAVAGE_DMA_PAGE_SIZE + \ + dev_priv->dma_pages[cur].used; \ + if (dev_priv->dma_pages[cur].used == 0) \ + savage_dma_wait(dev_priv, cur); \ + dev_priv->dma_pages[cur].used += (n); \ + } \ +} while(0) + +#define DMA_WRITE( val ) *dma_ptr++ = (uint32_t)(val) + +#define DMA_COPY_FROM_USER(src,n) do { \ + DRM_COPY_FROM_USER_UNCHECKED(dma_ptr, (src), (n)*4); \ + dma_ptr += n; \ +} while(0) + +#if SAVAGE_DMA_DEBUG +#define DMA_COMMIT() do { \ + unsigned int cur = dev_priv->current_dma_page; \ + uint32_t *expected = (uint32_t *)dev_priv->cmd_dma->handle + \ + cur * SAVAGE_DMA_PAGE_SIZE + \ + dev_priv->dma_pages[cur].used; \ + if (dma_ptr != expected) { \ + DRM_ERROR("DMA allocation and use don't match: " \ + "%p != %p\n", expected, dma_ptr); \ + savage_dma_reset(dev_priv); \ + } \ +} while(0) +#else +#define DMA_COMMIT() do {/* nothing */} while(0) +#endif + +#define DMA_FLUSH() dev_priv->dma_flush(dev_priv) + +/* Buffer aging via event tag + */ + +#define UPDATE_EVENT_COUNTER( ) do { \ + if (dev_priv->status_ptr) { \ + uint16_t count; \ + /* coordinate with Xserver */ \ + count = dev_priv->status_ptr[1023]; \ + if (count < dev_priv->event_counter) \ + dev_priv->event_wrap++; \ + dev_priv->event_counter = count; \ + } \ +} while(0) + +#define SET_AGE( age, e, w ) do { \ + (age)->event = e; \ + (age)->wrap = w; \ +} while(0) + +#define TEST_AGE( age, e, w ) \ + ( (age)->wrap < (w) || ( (age)->wrap == (w) && (age)->event <= (e) ) ) + +#endif /* __SAVAGE_DRV_H__ */ diff --git a/drivers/char/drm/savage_state.c b/drivers/char/drm/savage_state.c new file mode 100644 index 00000000000..475695a0008 --- /dev/null +++ b/drivers/char/drm/savage_state.c @@ -0,0 +1,1146 @@ +/* savage_state.c -- State and drawing support for Savage + * + * Copyright 2004 Felix Kuehling + * All Rights Reserved. + * + * Permission is hereby granted, free of charge, to any person obtaining a + * copy of this software and associated documentation files (the "Software"), + * to deal in the Software without restriction, including without limitation + * the rights to use, copy, modify, merge, publish, distribute, sub license, + * and/or sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice (including the + * next paragraph) shall be included in all copies or substantial portions + * of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF + * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NON-INFRINGEMENT. IN NO EVENT SHALL FELIX KUEHLING BE LIABLE FOR + * ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF + * CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION + * WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE. + */ +#include "drmP.h" +#include "savage_drm.h" +#include "savage_drv.h" + +void savage_emit_clip_rect_s3d(drm_savage_private_t *dev_priv, + drm_clip_rect_t *pbox) +{ + uint32_t scstart = dev_priv->state.s3d.new_scstart; + uint32_t scend = dev_priv->state.s3d.new_scend; + scstart = (scstart & ~SAVAGE_SCISSOR_MASK_S3D) | + ((uint32_t)pbox->x1 & 0x000007ff) | + (((uint32_t)pbox->y1 << 16) & 0x07ff0000); + scend = (scend & ~SAVAGE_SCISSOR_MASK_S3D) | + (((uint32_t)pbox->x2-1) & 0x000007ff) | + ((((uint32_t)pbox->y2-1) << 16) & 0x07ff0000); + if (scstart != dev_priv->state.s3d.scstart || + scend != dev_priv->state.s3d.scend) { + DMA_LOCALS; + BEGIN_DMA(4); + DMA_WRITE(BCI_CMD_WAIT|BCI_CMD_WAIT_3D); + DMA_SET_REGISTERS(SAVAGE_SCSTART_S3D, 2); + DMA_WRITE(scstart); + DMA_WRITE(scend); + dev_priv->state.s3d.scstart = scstart; + dev_priv->state.s3d.scend = scend; + dev_priv->waiting = 1; + DMA_COMMIT(); + } +} + +void savage_emit_clip_rect_s4(drm_savage_private_t *dev_priv, + drm_clip_rect_t *pbox) +{ + uint32_t drawctrl0 = dev_priv->state.s4.new_drawctrl0; + uint32_t drawctrl1 = dev_priv->state.s4.new_drawctrl1; + drawctrl0 = (drawctrl0 & ~SAVAGE_SCISSOR_MASK_S4) | + ((uint32_t)pbox->x1 & 0x000007ff) | + (((uint32_t)pbox->y1 << 12) & 0x00fff000); + drawctrl1 = (drawctrl1 & ~SAVAGE_SCISSOR_MASK_S4) | + (((uint32_t)pbox->x2-1) & 0x000007ff) | + ((((uint32_t)pbox->y2-1) << 12) & 0x00fff000); + if (drawctrl0 != dev_priv->state.s4.drawctrl0 || + drawctrl1 != dev_priv->state.s4.drawctrl1) { + DMA_LOCALS; + BEGIN_DMA(4); + DMA_WRITE(BCI_CMD_WAIT|BCI_CMD_WAIT_3D); + DMA_SET_REGISTERS(SAVAGE_DRAWCTRL0_S4, 2); + DMA_WRITE(drawctrl0); + DMA_WRITE(drawctrl1); + dev_priv->state.s4.drawctrl0 = drawctrl0; + dev_priv->state.s4.drawctrl1 = drawctrl1; + dev_priv->waiting = 1; + DMA_COMMIT(); + } +} + +static int savage_verify_texaddr(drm_savage_private_t *dev_priv, int unit, + uint32_t addr) +{ + if ((addr & 6) != 2) { /* reserved bits */ + DRM_ERROR("bad texAddr%d %08x (reserved bits)\n", unit, addr); + return DRM_ERR(EINVAL); + } + if (!(addr & 1)) { /* local */ + addr &= ~7; + if (addr < dev_priv->texture_offset || + addr >= dev_priv->texture_offset+dev_priv->texture_size) { + DRM_ERROR("bad texAddr%d %08x (local addr out of range)\n", + unit, addr); + return DRM_ERR(EINVAL); + } + } else { /* AGP */ + if (!dev_priv->agp_textures) { + DRM_ERROR("bad texAddr%d %08x (AGP not available)\n", + unit, addr); + return DRM_ERR(EINVAL); + } + addr &= ~7; + if (addr < dev_priv->agp_textures->offset || + addr >= (dev_priv->agp_textures->offset + + dev_priv->agp_textures->size)) { + DRM_ERROR("bad texAddr%d %08x (AGP addr out of range)\n", + unit, addr); + return DRM_ERR(EINVAL); + } + } + return 0; +} + +#define SAVE_STATE(reg,where) \ + if(start <= reg && start+count > reg) \ + DRM_GET_USER_UNCHECKED(dev_priv->state.where, ®s[reg-start]) +#define SAVE_STATE_MASK(reg,where,mask) do { \ + if(start <= reg && start+count > reg) { \ + uint32_t tmp; \ + DRM_GET_USER_UNCHECKED(tmp, ®s[reg-start]); \ + dev_priv->state.where = (tmp & (mask)) | \ + (dev_priv->state.where & ~(mask)); \ + } \ +} while (0) +static int savage_verify_state_s3d(drm_savage_private_t *dev_priv, + unsigned int start, unsigned int count, + const uint32_t __user *regs) +{ + if (start < SAVAGE_TEXPALADDR_S3D || + start+count-1 > SAVAGE_DESTTEXRWWATERMARK_S3D) { + DRM_ERROR("invalid register range (0x%04x-0x%04x)\n", + start, start+count-1); + return DRM_ERR(EINVAL); + } + + SAVE_STATE_MASK(SAVAGE_SCSTART_S3D, s3d.new_scstart, + ~SAVAGE_SCISSOR_MASK_S3D); + SAVE_STATE_MASK(SAVAGE_SCEND_S3D, s3d.new_scend, + ~SAVAGE_SCISSOR_MASK_S3D); + + /* if any texture regs were changed ... */ + if (start <= SAVAGE_TEXCTRL_S3D && + start+count > SAVAGE_TEXPALADDR_S3D) { + /* ... check texture state */ + SAVE_STATE(SAVAGE_TEXCTRL_S3D, s3d.texctrl); + SAVE_STATE(SAVAGE_TEXADDR_S3D, s3d.texaddr); + if (dev_priv->state.s3d.texctrl & SAVAGE_TEXCTRL_TEXEN_MASK) + return savage_verify_texaddr( + dev_priv, 0, dev_priv->state.s3d.texaddr); + } + + return 0; +} + +static int savage_verify_state_s4(drm_savage_private_t *dev_priv, + unsigned int start, unsigned int count, + const uint32_t __user *regs) +{ + int ret = 0; + + if (start < SAVAGE_DRAWLOCALCTRL_S4 || + start+count-1 > SAVAGE_TEXBLENDCOLOR_S4) { + DRM_ERROR("invalid register range (0x%04x-0x%04x)\n", + start, start+count-1); + return DRM_ERR(EINVAL); + } + + SAVE_STATE_MASK(SAVAGE_DRAWCTRL0_S4, s4.new_drawctrl0, + ~SAVAGE_SCISSOR_MASK_S4); + SAVE_STATE_MASK(SAVAGE_DRAWCTRL1_S4, s4.new_drawctrl1, + ~SAVAGE_SCISSOR_MASK_S4); + + /* if any texture regs were changed ... */ + if (start <= SAVAGE_TEXDESCR_S4 && + start+count > SAVAGE_TEXPALADDR_S4) { + /* ... check texture state */ + SAVE_STATE(SAVAGE_TEXDESCR_S4, s4.texdescr); + SAVE_STATE(SAVAGE_TEXADDR0_S4, s4.texaddr0); + SAVE_STATE(SAVAGE_TEXADDR1_S4, s4.texaddr1); + if (dev_priv->state.s4.texdescr & SAVAGE_TEXDESCR_TEX0EN_MASK) + ret |= savage_verify_texaddr( + dev_priv, 0, dev_priv->state.s4.texaddr0); + if (dev_priv->state.s4.texdescr & SAVAGE_TEXDESCR_TEX1EN_MASK) + ret |= savage_verify_texaddr( + dev_priv, 1, dev_priv->state.s4.texaddr1); + } + + return ret; +} +#undef SAVE_STATE +#undef SAVE_STATE_MASK + +static int savage_dispatch_state(drm_savage_private_t *dev_priv, + const drm_savage_cmd_header_t *cmd_header, + const uint32_t __user *regs) +{ + unsigned int count = cmd_header->state.count; + unsigned int start = cmd_header->state.start; + unsigned int count2 = 0; + unsigned int bci_size; + int ret; + DMA_LOCALS; + + if (!count) + return 0; + + if (DRM_VERIFYAREA_READ(regs, count*4)) + return DRM_ERR(EFAULT); + + if (S3_SAVAGE3D_SERIES(dev_priv->chipset)) { + ret = savage_verify_state_s3d(dev_priv, start, count, regs); + if (ret != 0) + return ret; + /* scissor regs are emitted in savage_dispatch_draw */ + if (start < SAVAGE_SCSTART_S3D) { + if (start+count > SAVAGE_SCEND_S3D+1) + count2 = count - (SAVAGE_SCEND_S3D+1 - start); + if (start+count > SAVAGE_SCSTART_S3D) + count = SAVAGE_SCSTART_S3D - start; + } else if (start <= SAVAGE_SCEND_S3D) { + if (start+count > SAVAGE_SCEND_S3D+1) { + count -= SAVAGE_SCEND_S3D+1 - start; + start = SAVAGE_SCEND_S3D+1; + } else + return 0; + } + } else { + ret = savage_verify_state_s4(dev_priv, start, count, regs); + if (ret != 0) + return ret; + /* scissor regs are emitted in savage_dispatch_draw */ + if (start < SAVAGE_DRAWCTRL0_S4) { + if (start+count > SAVAGE_DRAWCTRL1_S4+1) + count2 = count - (SAVAGE_DRAWCTRL1_S4+1 - start); + if (start+count > SAVAGE_DRAWCTRL0_S4) + count = SAVAGE_DRAWCTRL0_S4 - start; + } else if (start <= SAVAGE_DRAWCTRL1_S4) { + if (start+count > SAVAGE_DRAWCTRL1_S4+1) { + count -= SAVAGE_DRAWCTRL1_S4+1 - start; + start = SAVAGE_DRAWCTRL1_S4+1; + } else + return 0; + } + } + + bci_size = count + (count+254)/255 + count2 + (count2+254)/255; + + if (cmd_header->state.global) { + BEGIN_DMA(bci_size+1); + DMA_WRITE(BCI_CMD_WAIT | BCI_CMD_WAIT_3D); + dev_priv->waiting = 1; + } else { + BEGIN_DMA(bci_size); + } + + do { + while (count > 0) { + unsigned int n = count < 255 ? count : 255; + DMA_SET_REGISTERS(start, n); + DMA_COPY_FROM_USER(regs, n); + count -= n; + start += n; + regs += n; + } + start += 2; + regs += 2; + count = count2; + count2 = 0; + } while (count); + + DMA_COMMIT(); + + return 0; +} + +static int savage_dispatch_dma_prim(drm_savage_private_t *dev_priv, + const drm_savage_cmd_header_t *cmd_header, + const drm_buf_t *dmabuf) +{ + unsigned char reorder = 0; + unsigned int prim = cmd_header->prim.prim; + unsigned int skip = cmd_header->prim.skip; + unsigned int n = cmd_header->prim.count; + unsigned int start = cmd_header->prim.start; + unsigned int i; + BCI_LOCALS; + + if (!dmabuf) { + DRM_ERROR("called without dma buffers!\n"); + return DRM_ERR(EINVAL); + } + + if (!n) + return 0; + + switch (prim) { + case SAVAGE_PRIM_TRILIST_201: + reorder = 1; + prim = SAVAGE_PRIM_TRILIST; + case SAVAGE_PRIM_TRILIST: + if (n % 3 != 0) { + DRM_ERROR("wrong number of vertices %u in TRILIST\n", + n); + return DRM_ERR(EINVAL); + } + break; + case SAVAGE_PRIM_TRISTRIP: + case SAVAGE_PRIM_TRIFAN: + if (n < 3) { + DRM_ERROR("wrong number of vertices %u in TRIFAN/STRIP\n", + n); + return DRM_ERR(EINVAL); + } + break; + default: + DRM_ERROR("invalid primitive type %u\n", prim); + return DRM_ERR(EINVAL); + } + + if (S3_SAVAGE3D_SERIES(dev_priv->chipset)) { + if (skip != 0) { + DRM_ERROR("invalid skip flags 0x%04x for DMA\n", + skip); + return DRM_ERR(EINVAL); + } + } else { + unsigned int size = 10 - (skip & 1) - (skip >> 1 & 1) - + (skip >> 2 & 1) - (skip >> 3 & 1) - (skip >> 4 & 1) - + (skip >> 5 & 1) - (skip >> 6 & 1) - (skip >> 7 & 1); + if (skip > SAVAGE_SKIP_ALL_S4 || size != 8) { + DRM_ERROR("invalid skip flags 0x%04x for DMA\n", + skip); + return DRM_ERR(EINVAL); + } + if (reorder) { + DRM_ERROR("TRILIST_201 used on Savage4 hardware\n"); + return DRM_ERR(EINVAL); + } + } + + if (start + n > dmabuf->total/32) { + DRM_ERROR("vertex indices (%u-%u) out of range (0-%u)\n", + start, start + n - 1, dmabuf->total/32); + return DRM_ERR(EINVAL); + } + + /* Vertex DMA doesn't work with command DMA at the same time, + * so we use BCI_... to submit commands here. Flush buffered + * faked DMA first. */ + DMA_FLUSH(); + + if (dmabuf->bus_address != dev_priv->state.common.vbaddr) { + BEGIN_BCI(2); + BCI_SET_REGISTERS(SAVAGE_VERTBUFADDR, 1); + BCI_WRITE(dmabuf->bus_address | dev_priv->dma_type); + dev_priv->state.common.vbaddr = dmabuf->bus_address; + } + if (S3_SAVAGE3D_SERIES(dev_priv->chipset) && dev_priv->waiting) { + /* Workaround for what looks like a hardware bug. If a + * WAIT_3D_IDLE was emitted some time before the + * indexed drawing command then the engine will lock + * up. There are two known workarounds: + * WAIT_IDLE_EMPTY or emit at least 63 NOPs. */ + BEGIN_BCI(63); + for (i = 0; i < 63; ++i) + BCI_WRITE(BCI_CMD_WAIT); + dev_priv->waiting = 0; + } + + prim <<= 25; + while (n != 0) { + /* Can emit up to 255 indices (85 triangles) at once. */ + unsigned int count = n > 255 ? 255 : n; + if (reorder) { + /* Need to reorder indices for correct flat + * shading while preserving the clock sense + * for correct culling. Only on Savage3D. */ + int reorder[3] = {-1, -1, -1}; + reorder[start%3] = 2; + + BEGIN_BCI((count+1+1)/2); + BCI_DRAW_INDICES_S3D(count, prim, start+2); + + for (i = start+1; i+1 < start+count; i += 2) + BCI_WRITE((i + reorder[i % 3]) | + ((i+1 + reorder[(i+1) % 3]) << 16)); + if (i < start+count) + BCI_WRITE(i + reorder[i%3]); + } else if (S3_SAVAGE3D_SERIES(dev_priv->chipset)) { + BEGIN_BCI((count+1+1)/2); + BCI_DRAW_INDICES_S3D(count, prim, start); + + for (i = start+1; i+1 < start+count; i += 2) + BCI_WRITE(i | ((i+1) << 16)); + if (i < start+count) + BCI_WRITE(i); + } else { + BEGIN_BCI((count+2+1)/2); + BCI_DRAW_INDICES_S4(count, prim, skip); + + for (i = start; i+1 < start+count; i += 2) + BCI_WRITE(i | ((i+1) << 16)); + if (i < start+count) + BCI_WRITE(i); + } + + start += count; + n -= count; + + prim |= BCI_CMD_DRAW_CONT; + } + + return 0; +} + +static int savage_dispatch_vb_prim(drm_savage_private_t *dev_priv, + const drm_savage_cmd_header_t *cmd_header, + const uint32_t __user *vtxbuf, + unsigned int vb_size, + unsigned int vb_stride) +{ + unsigned char reorder = 0; + unsigned int prim = cmd_header->prim.prim; + unsigned int skip = cmd_header->prim.skip; + unsigned int n = cmd_header->prim.count; + unsigned int start = cmd_header->prim.start; + unsigned int vtx_size; + unsigned int i; + DMA_LOCALS; + + if (!n) + return 0; + + switch (prim) { + case SAVAGE_PRIM_TRILIST_201: + reorder = 1; + prim = SAVAGE_PRIM_TRILIST; + case SAVAGE_PRIM_TRILIST: + if (n % 3 != 0) { + DRM_ERROR("wrong number of vertices %u in TRILIST\n", + n); + return DRM_ERR(EINVAL); + } + break; + case SAVAGE_PRIM_TRISTRIP: + case SAVAGE_PRIM_TRIFAN: + if (n < 3) { + DRM_ERROR("wrong number of vertices %u in TRIFAN/STRIP\n", + n); + return DRM_ERR(EINVAL); + } + break; + default: + DRM_ERROR("invalid primitive type %u\n", prim); + return DRM_ERR(EINVAL); + } + + if (S3_SAVAGE3D_SERIES(dev_priv->chipset)) { + if (skip > SAVAGE_SKIP_ALL_S3D) { + DRM_ERROR("invalid skip flags 0x%04x\n", skip); + return DRM_ERR(EINVAL); + } + vtx_size = 8; /* full vertex */ + } else { + if (skip > SAVAGE_SKIP_ALL_S4) { + DRM_ERROR("invalid skip flags 0x%04x\n", skip); + return DRM_ERR(EINVAL); + } + vtx_size = 10; /* full vertex */ + } + + vtx_size -= (skip & 1) + (skip >> 1 & 1) + + (skip >> 2 & 1) + (skip >> 3 & 1) + (skip >> 4 & 1) + + (skip >> 5 & 1) + (skip >> 6 & 1) + (skip >> 7 & 1); + + if (vtx_size > vb_stride) { + DRM_ERROR("vertex size greater than vb stride (%u > %u)\n", + vtx_size, vb_stride); + return DRM_ERR(EINVAL); + } + + if (start + n > vb_size / (vb_stride*4)) { + DRM_ERROR("vertex indices (%u-%u) out of range (0-%u)\n", + start, start + n - 1, vb_size / (vb_stride*4)); + return DRM_ERR(EINVAL); + } + + prim <<= 25; + while (n != 0) { + /* Can emit up to 255 vertices (85 triangles) at once. */ + unsigned int count = n > 255 ? 255 : n; + if (reorder) { + /* Need to reorder vertices for correct flat + * shading while preserving the clock sense + * for correct culling. Only on Savage3D. */ + int reorder[3] = {-1, -1, -1}; + reorder[start%3] = 2; + + BEGIN_DMA(count*vtx_size+1); + DMA_DRAW_PRIMITIVE(count, prim, skip); + + for (i = start; i < start+count; ++i) { + unsigned int j = i + reorder[i % 3]; + DMA_COPY_FROM_USER(&vtxbuf[vb_stride*j], + vtx_size); + } + + DMA_COMMIT(); + } else { + BEGIN_DMA(count*vtx_size+1); + DMA_DRAW_PRIMITIVE(count, prim, skip); + + if (vb_stride == vtx_size) { + DMA_COPY_FROM_USER(&vtxbuf[vb_stride*start], + vtx_size*count); + } else { + for (i = start; i < start+count; ++i) { + DMA_COPY_FROM_USER( + &vtxbuf[vb_stride*i], + vtx_size); + } + } + + DMA_COMMIT(); + } + + start += count; + n -= count; + + prim |= BCI_CMD_DRAW_CONT; + } + + return 0; +} + +static int savage_dispatch_dma_idx(drm_savage_private_t *dev_priv, + const drm_savage_cmd_header_t *cmd_header, + const uint16_t __user *usr_idx, + const drm_buf_t *dmabuf) +{ + unsigned char reorder = 0; + unsigned int prim = cmd_header->idx.prim; + unsigned int skip = cmd_header->idx.skip; + unsigned int n = cmd_header->idx.count; + unsigned int i; + BCI_LOCALS; + + if (!dmabuf) { + DRM_ERROR("called without dma buffers!\n"); + return DRM_ERR(EINVAL); + } + + if (!n) + return 0; + + switch (prim) { + case SAVAGE_PRIM_TRILIST_201: + reorder = 1; + prim = SAVAGE_PRIM_TRILIST; + case SAVAGE_PRIM_TRILIST: + if (n % 3 != 0) { + DRM_ERROR("wrong number of indices %u in TRILIST\n", + n); + return DRM_ERR(EINVAL); + } + break; + case SAVAGE_PRIM_TRISTRIP: + case SAVAGE_PRIM_TRIFAN: + if (n < 3) { + DRM_ERROR("wrong number of indices %u in TRIFAN/STRIP\n", + n); + return DRM_ERR(EINVAL); + } + break; + default: + DRM_ERROR("invalid primitive type %u\n", prim); + return DRM_ERR(EINVAL); + } + + if (S3_SAVAGE3D_SERIES(dev_priv->chipset)) { + if (skip != 0) { + DRM_ERROR("invalid skip flags 0x%04x for DMA\n", + skip); + return DRM_ERR(EINVAL); + } + } else { + unsigned int size = 10 - (skip & 1) - (skip >> 1 & 1) - + (skip >> 2 & 1) - (skip >> 3 & 1) - (skip >> 4 & 1) - + (skip >> 5 & 1) - (skip >> 6 & 1) - (skip >> 7 & 1); + if (skip > SAVAGE_SKIP_ALL_S4 || size != 8) { + DRM_ERROR("invalid skip flags 0x%04x for DMA\n", + skip); + return DRM_ERR(EINVAL); + } + if (reorder) { + DRM_ERROR("TRILIST_201 used on Savage4 hardware\n"); + return DRM_ERR(EINVAL); + } + } + + /* Vertex DMA doesn't work with command DMA at the same time, + * so we use BCI_... to submit commands here. Flush buffered + * faked DMA first. */ + DMA_FLUSH(); + + if (dmabuf->bus_address != dev_priv->state.common.vbaddr) { + BEGIN_BCI(2); + BCI_SET_REGISTERS(SAVAGE_VERTBUFADDR, 1); + BCI_WRITE(dmabuf->bus_address | dev_priv->dma_type); + dev_priv->state.common.vbaddr = dmabuf->bus_address; + } + if (S3_SAVAGE3D_SERIES(dev_priv->chipset) && dev_priv->waiting) { + /* Workaround for what looks like a hardware bug. If a + * WAIT_3D_IDLE was emitted some time before the + * indexed drawing command then the engine will lock + * up. There are two known workarounds: + * WAIT_IDLE_EMPTY or emit at least 63 NOPs. */ + BEGIN_BCI(63); + for (i = 0; i < 63; ++i) + BCI_WRITE(BCI_CMD_WAIT); + dev_priv->waiting = 0; + } + + prim <<= 25; + while (n != 0) { + /* Can emit up to 255 indices (85 triangles) at once. */ + unsigned int count = n > 255 ? 255 : n; + /* Is it ok to allocate 510 bytes on the stack in an ioctl? */ + uint16_t idx[255]; + + /* Copy and check indices */ + DRM_COPY_FROM_USER_UNCHECKED(idx, usr_idx, count*2); + for (i = 0; i < count; ++i) { + if (idx[i] > dmabuf->total/32) { + DRM_ERROR("idx[%u]=%u out of range (0-%u)\n", + i, idx[i], dmabuf->total/32); + return DRM_ERR(EINVAL); + } + } + + if (reorder) { + /* Need to reorder indices for correct flat + * shading while preserving the clock sense + * for correct culling. Only on Savage3D. */ + int reorder[3] = {2, -1, -1}; + + BEGIN_BCI((count+1+1)/2); + BCI_DRAW_INDICES_S3D(count, prim, idx[2]); + + for (i = 1; i+1 < count; i += 2) + BCI_WRITE(idx[i + reorder[i % 3]] | + (idx[i+1 + reorder[(i+1) % 3]] << 16)); + if (i < count) + BCI_WRITE(idx[i + reorder[i%3]]); + } else if (S3_SAVAGE3D_SERIES(dev_priv->chipset)) { + BEGIN_BCI((count+1+1)/2); + BCI_DRAW_INDICES_S3D(count, prim, idx[0]); + + for (i = 1; i+1 < count; i += 2) + BCI_WRITE(idx[i] | (idx[i+1] << 16)); + if (i < count) + BCI_WRITE(idx[i]); + } else { + BEGIN_BCI((count+2+1)/2); + BCI_DRAW_INDICES_S4(count, prim, skip); + + for (i = 0; i+1 < count; i += 2) + BCI_WRITE(idx[i] | (idx[i+1] << 16)); + if (i < count) + BCI_WRITE(idx[i]); + } + + usr_idx += count; + n -= count; + + prim |= BCI_CMD_DRAW_CONT; + } + + return 0; +} + +static int savage_dispatch_vb_idx(drm_savage_private_t *dev_priv, + const drm_savage_cmd_header_t *cmd_header, + const uint16_t __user *usr_idx, + const uint32_t __user *vtxbuf, + unsigned int vb_size, + unsigned int vb_stride) +{ + unsigned char reorder = 0; + unsigned int prim = cmd_header->idx.prim; + unsigned int skip = cmd_header->idx.skip; + unsigned int n = cmd_header->idx.count; + unsigned int vtx_size; + unsigned int i; + DMA_LOCALS; + + if (!n) + return 0; + + switch (prim) { + case SAVAGE_PRIM_TRILIST_201: + reorder = 1; + prim = SAVAGE_PRIM_TRILIST; + case SAVAGE_PRIM_TRILIST: + if (n % 3 != 0) { + DRM_ERROR("wrong number of indices %u in TRILIST\n", + n); + return DRM_ERR(EINVAL); + } + break; + case SAVAGE_PRIM_TRISTRIP: + case SAVAGE_PRIM_TRIFAN: + if (n < 3) { + DRM_ERROR("wrong number of indices %u in TRIFAN/STRIP\n", + n); + return DRM_ERR(EINVAL); + } + break; + default: + DRM_ERROR("invalid primitive type %u\n", prim); + return DRM_ERR(EINVAL); + } + + if (S3_SAVAGE3D_SERIES(dev_priv->chipset)) { + if (skip > SAVAGE_SKIP_ALL_S3D) { + DRM_ERROR("invalid skip flags 0x%04x\n", skip); + return DRM_ERR(EINVAL); + } + vtx_size = 8; /* full vertex */ + } else { + if (skip > SAVAGE_SKIP_ALL_S4) { + DRM_ERROR("invalid skip flags 0x%04x\n", skip); + return DRM_ERR(EINVAL); + } + vtx_size = 10; /* full vertex */ + } + + vtx_size -= (skip & 1) + (skip >> 1 & 1) + + (skip >> 2 & 1) + (skip >> 3 & 1) + (skip >> 4 & 1) + + (skip >> 5 & 1) + (skip >> 6 & 1) + (skip >> 7 & 1); + + if (vtx_size > vb_stride) { + DRM_ERROR("vertex size greater than vb stride (%u > %u)\n", + vtx_size, vb_stride); + return DRM_ERR(EINVAL); + } + + prim <<= 25; + while (n != 0) { + /* Can emit up to 255 vertices (85 triangles) at once. */ + unsigned int count = n > 255 ? 255 : n; + /* Is it ok to allocate 510 bytes on the stack in an ioctl? */ + uint16_t idx[255]; + + /* Copy and check indices */ + DRM_COPY_FROM_USER_UNCHECKED(idx, usr_idx, count*2); + for (i = 0; i < count; ++i) { + if (idx[i] > vb_size / (vb_stride*4)) { + DRM_ERROR("idx[%u]=%u out of range (0-%u)\n", + i, idx[i], vb_size / (vb_stride*4)); + return DRM_ERR(EINVAL); + } + } + + if (reorder) { + /* Need to reorder vertices for correct flat + * shading while preserving the clock sense + * for correct culling. Only on Savage3D. */ + int reorder[3] = {2, -1, -1}; + + BEGIN_DMA(count*vtx_size+1); + DMA_DRAW_PRIMITIVE(count, prim, skip); + + for (i = 0; i < count; ++i) { + unsigned int j = idx[i + reorder[i % 3]]; + DMA_COPY_FROM_USER(&vtxbuf[vb_stride*j], + vtx_size); + } + + DMA_COMMIT(); + } else { + BEGIN_DMA(count*vtx_size+1); + DMA_DRAW_PRIMITIVE(count, prim, skip); + + for (i = 0; i < count; ++i) { + unsigned int j = idx[i]; + DMA_COPY_FROM_USER(&vtxbuf[vb_stride*j], + vtx_size); + } + + DMA_COMMIT(); + } + + usr_idx += count; + n -= count; + + prim |= BCI_CMD_DRAW_CONT; + } + + return 0; +} + +static int savage_dispatch_clear(drm_savage_private_t *dev_priv, + const drm_savage_cmd_header_t *cmd_header, + const drm_savage_cmd_header_t __user *data, + unsigned int nbox, + const drm_clip_rect_t __user *usr_boxes) +{ + unsigned int flags = cmd_header->clear0.flags, mask, value; + unsigned int clear_cmd; + unsigned int i, nbufs; + DMA_LOCALS; + + if (nbox == 0) + return 0; + + DRM_GET_USER_UNCHECKED(mask, &((const drm_savage_cmd_header_t*)data) + ->clear1.mask); + DRM_GET_USER_UNCHECKED(value, &((const drm_savage_cmd_header_t*)data) + ->clear1.value); + + clear_cmd = BCI_CMD_RECT | BCI_CMD_RECT_XP | BCI_CMD_RECT_YP | + BCI_CMD_SEND_COLOR | BCI_CMD_DEST_PBD_NEW; + BCI_CMD_SET_ROP(clear_cmd,0xCC); + + nbufs = ((flags & SAVAGE_FRONT) ? 1 : 0) + + ((flags & SAVAGE_BACK) ? 1 : 0) + + ((flags & SAVAGE_DEPTH) ? 1 : 0); + if (nbufs == 0) + return 0; + + if (mask != 0xffffffff) { + /* set mask */ + BEGIN_DMA(2); + DMA_SET_REGISTERS(SAVAGE_BITPLANEWTMASK, 1); + DMA_WRITE(mask); + DMA_COMMIT(); + } + for (i = 0; i < nbox; ++i) { + drm_clip_rect_t box; + unsigned int x, y, w, h; + unsigned int buf; + DRM_COPY_FROM_USER_UNCHECKED(&box, &usr_boxes[i], sizeof(box)); + x = box.x1, y = box.y1; + w = box.x2 - box.x1; + h = box.y2 - box.y1; + BEGIN_DMA(nbufs*6); + for (buf = SAVAGE_FRONT; buf <= SAVAGE_DEPTH; buf <<= 1) { + if (!(flags & buf)) + continue; + DMA_WRITE(clear_cmd); + switch(buf) { + case SAVAGE_FRONT: + DMA_WRITE(dev_priv->front_offset); + DMA_WRITE(dev_priv->front_bd); + break; + case SAVAGE_BACK: + DMA_WRITE(dev_priv->back_offset); + DMA_WRITE(dev_priv->back_bd); + break; + case SAVAGE_DEPTH: + DMA_WRITE(dev_priv->depth_offset); + DMA_WRITE(dev_priv->depth_bd); + break; + } + DMA_WRITE(value); + DMA_WRITE(BCI_X_Y(x, y)); + DMA_WRITE(BCI_W_H(w, h)); + } + DMA_COMMIT(); + } + if (mask != 0xffffffff) { + /* reset mask */ + BEGIN_DMA(2); + DMA_SET_REGISTERS(SAVAGE_BITPLANEWTMASK, 1); + DMA_WRITE(0xffffffff); + DMA_COMMIT(); + } + + return 0; +} + +static int savage_dispatch_swap(drm_savage_private_t *dev_priv, + unsigned int nbox, + const drm_clip_rect_t __user *usr_boxes) +{ + unsigned int swap_cmd; + unsigned int i; + DMA_LOCALS; + + if (nbox == 0) + return 0; + + swap_cmd = BCI_CMD_RECT | BCI_CMD_RECT_XP | BCI_CMD_RECT_YP | + BCI_CMD_SRC_PBD_COLOR_NEW | BCI_CMD_DEST_GBD; + BCI_CMD_SET_ROP(swap_cmd,0xCC); + + for (i = 0; i < nbox; ++i) { + drm_clip_rect_t box; + DRM_COPY_FROM_USER_UNCHECKED(&box, &usr_boxes[i], sizeof(box)); + + BEGIN_DMA(6); + DMA_WRITE(swap_cmd); + DMA_WRITE(dev_priv->back_offset); + DMA_WRITE(dev_priv->back_bd); + DMA_WRITE(BCI_X_Y(box.x1, box.y1)); + DMA_WRITE(BCI_X_Y(box.x1, box.y1)); + DMA_WRITE(BCI_W_H(box.x2-box.x1, box.y2-box.y1)); + DMA_COMMIT(); + } + + return 0; +} + +static int savage_dispatch_draw(drm_savage_private_t *dev_priv, + const drm_savage_cmd_header_t __user *start, + const drm_savage_cmd_header_t __user *end, + const drm_buf_t *dmabuf, + const unsigned int __user *usr_vtxbuf, + unsigned int vb_size, unsigned int vb_stride, + unsigned int nbox, + const drm_clip_rect_t __user *usr_boxes) +{ + unsigned int i, j; + int ret; + + for (i = 0; i < nbox; ++i) { + drm_clip_rect_t box; + const drm_savage_cmd_header_t __user *usr_cmdbuf; + DRM_COPY_FROM_USER_UNCHECKED(&box, &usr_boxes[i], sizeof(box)); + dev_priv->emit_clip_rect(dev_priv, &box); + + usr_cmdbuf = start; + while (usr_cmdbuf < end) { + drm_savage_cmd_header_t cmd_header; + DRM_COPY_FROM_USER_UNCHECKED(&cmd_header, usr_cmdbuf, + sizeof(cmd_header)); + usr_cmdbuf++; + switch (cmd_header.cmd.cmd) { + case SAVAGE_CMD_DMA_PRIM: + ret = savage_dispatch_dma_prim( + dev_priv, &cmd_header, dmabuf); + break; + case SAVAGE_CMD_VB_PRIM: + ret = savage_dispatch_vb_prim( + dev_priv, &cmd_header, + (const uint32_t __user *)usr_vtxbuf, + vb_size, vb_stride); + break; + case SAVAGE_CMD_DMA_IDX: + j = (cmd_header.idx.count + 3) / 4; + /* j was check in savage_bci_cmdbuf */ + ret = savage_dispatch_dma_idx( + dev_priv, &cmd_header, + (const uint16_t __user *)usr_cmdbuf, + dmabuf); + usr_cmdbuf += j; + break; + case SAVAGE_CMD_VB_IDX: + j = (cmd_header.idx.count + 3) / 4; + /* j was check in savage_bci_cmdbuf */ + ret = savage_dispatch_vb_idx( + dev_priv, &cmd_header, + (const uint16_t __user *)usr_cmdbuf, + (const uint32_t __user *)usr_vtxbuf, + vb_size, vb_stride); + usr_cmdbuf += j; + break; + default: + /* What's the best return code? EFAULT? */ + DRM_ERROR("IMPLEMENTATION ERROR: " + "non-drawing-command %d\n", + cmd_header.cmd.cmd); + return DRM_ERR(EINVAL); + } + + if (ret != 0) + return ret; + } + } + + return 0; +} + +int savage_bci_cmdbuf(DRM_IOCTL_ARGS) +{ + DRM_DEVICE; + drm_savage_private_t *dev_priv = dev->dev_private; + drm_device_dma_t *dma = dev->dma; + drm_buf_t *dmabuf; + drm_savage_cmdbuf_t cmdbuf; + drm_savage_cmd_header_t __user *usr_cmdbuf; + drm_savage_cmd_header_t __user *first_draw_cmd; + unsigned int __user *usr_vtxbuf; + drm_clip_rect_t __user *usr_boxes; + unsigned int i, j; + int ret = 0; + + DRM_DEBUG("\n"); + + LOCK_TEST_WITH_RETURN(dev, filp); + + DRM_COPY_FROM_USER_IOCTL(cmdbuf, (drm_savage_cmdbuf_t __user *)data, + sizeof(cmdbuf)); + + if (dma && dma->buflist) { + if (cmdbuf.dma_idx > dma->buf_count) { + DRM_ERROR("vertex buffer index %u out of range (0-%u)\n", + cmdbuf.dma_idx, dma->buf_count-1); + return DRM_ERR(EINVAL); + } + dmabuf = dma->buflist[cmdbuf.dma_idx]; + } else { + dmabuf = NULL; + } + + usr_cmdbuf = (drm_savage_cmd_header_t __user *)cmdbuf.cmd_addr; + usr_vtxbuf = (unsigned int __user *)cmdbuf.vb_addr; + usr_boxes = (drm_clip_rect_t __user *)cmdbuf.box_addr; + if ((cmdbuf.size && DRM_VERIFYAREA_READ(usr_cmdbuf, cmdbuf.size*8)) || + (cmdbuf.vb_size && DRM_VERIFYAREA_READ( + usr_vtxbuf, cmdbuf.vb_size)) || + (cmdbuf.nbox && DRM_VERIFYAREA_READ( + usr_boxes, cmdbuf.nbox*sizeof(drm_clip_rect_t)))) + return DRM_ERR(EFAULT); + + /* Make sure writes to DMA buffers are finished before sending + * DMA commands to the graphics hardware. */ + DRM_MEMORYBARRIER(); + + /* Coming from user space. Don't know if the Xserver has + * emitted wait commands. Assuming the worst. */ + dev_priv->waiting = 1; + + i = 0; + first_draw_cmd = NULL; + while (i < cmdbuf.size) { + drm_savage_cmd_header_t cmd_header; + DRM_COPY_FROM_USER_UNCHECKED(&cmd_header, usr_cmdbuf, + sizeof(cmd_header)); + usr_cmdbuf++; + i++; + + /* Group drawing commands with same state to minimize + * iterations over clip rects. */ + j = 0; + switch (cmd_header.cmd.cmd) { + case SAVAGE_CMD_DMA_IDX: + case SAVAGE_CMD_VB_IDX: + j = (cmd_header.idx.count + 3) / 4; + if (i + j > cmdbuf.size) { + DRM_ERROR("indexed drawing command extends " + "beyond end of command buffer\n"); + DMA_FLUSH(); + return DRM_ERR(EINVAL); + } + /* fall through */ + case SAVAGE_CMD_DMA_PRIM: + case SAVAGE_CMD_VB_PRIM: + if (!first_draw_cmd) + first_draw_cmd = usr_cmdbuf-1; + usr_cmdbuf += j; + i += j; + break; + default: + if (first_draw_cmd) { + ret = savage_dispatch_draw ( + dev_priv, first_draw_cmd, usr_cmdbuf-1, + dmabuf, usr_vtxbuf, cmdbuf.vb_size, + cmdbuf.vb_stride, + cmdbuf.nbox, usr_boxes); + if (ret != 0) + return ret; + first_draw_cmd = NULL; + } + } + if (first_draw_cmd) + continue; + + switch (cmd_header.cmd.cmd) { + case SAVAGE_CMD_STATE: + j = (cmd_header.state.count + 1) / 2; + if (i + j > cmdbuf.size) { + DRM_ERROR("command SAVAGE_CMD_STATE extends " + "beyond end of command buffer\n"); + DMA_FLUSH(); + return DRM_ERR(EINVAL); + } + ret = savage_dispatch_state( + dev_priv, &cmd_header, + (uint32_t __user *)usr_cmdbuf); + usr_cmdbuf += j; + i += j; + break; + case SAVAGE_CMD_CLEAR: + if (i + 1 > cmdbuf.size) { + DRM_ERROR("command SAVAGE_CMD_CLEAR extends " + "beyond end of command buffer\n"); + DMA_FLUSH(); + return DRM_ERR(EINVAL); + } + ret = savage_dispatch_clear(dev_priv, &cmd_header, + usr_cmdbuf, + cmdbuf.nbox, usr_boxes); + usr_cmdbuf++; + i++; + break; + case SAVAGE_CMD_SWAP: + ret = savage_dispatch_swap(dev_priv, + cmdbuf.nbox, usr_boxes); + break; + default: + DRM_ERROR("invalid command 0x%x\n", cmd_header.cmd.cmd); + DMA_FLUSH(); + return DRM_ERR(EINVAL); + } + + if (ret != 0) { + DMA_FLUSH(); + return ret; + } + } + + if (first_draw_cmd) { + ret = savage_dispatch_draw ( + dev_priv, first_draw_cmd, usr_cmdbuf, dmabuf, + usr_vtxbuf, cmdbuf.vb_size, cmdbuf.vb_stride, + cmdbuf.nbox, usr_boxes); + if (ret != 0) { + DMA_FLUSH(); + return ret; + } + } + + DMA_FLUSH(); + + if (dmabuf && cmdbuf.discard) { + drm_savage_buf_priv_t *buf_priv = dmabuf->dev_private; + uint16_t event; + event = savage_bci_emit_event(dev_priv, SAVAGE_WAIT_3D); + SET_AGE(&buf_priv->age, event, dev_priv->event_wrap); + savage_freelist_put(dev, dmabuf); + } + + return 0; +} -- cgit v1.2.3 From ea8f400c98ec9ae0604bc5a6721174ef68635815 Mon Sep 17 00:00:00 2001 From: Peer Chen Date: Thu, 11 Aug 2005 15:09:23 -0400 Subject: [netdrvr tulip] Remove ULi-specific code from generic tulip driver It has a separate driver now, 'uli526x'. --- drivers/net/tulip/media.c | 36 ------------------------------------ drivers/net/tulip/timer.c | 1 - drivers/net/tulip/tulip.h | 8 ++------ drivers/net/tulip/tulip_core.c | 34 +++++++++++----------------------- 4 files changed, 13 insertions(+), 66 deletions(-) diff --git a/drivers/net/tulip/media.c b/drivers/net/tulip/media.c index e26c31f944b..f53396fe79c 100644 --- a/drivers/net/tulip/media.c +++ b/drivers/net/tulip/media.c @@ -81,25 +81,6 @@ int tulip_mdio_read(struct net_device *dev, int phy_id, int location) return retval & 0xffff; } - if(tp->chip_id == ULI526X && tp->revision >= 0x40) { - int value; - int i = 1000; - - value = ioread32(ioaddr + CSR9); - iowrite32(value & 0xFFEFFFFF, ioaddr + CSR9); - - value = (phy_id << 21) | (location << 16) | 0x08000000; - iowrite32(value, ioaddr + CSR10); - - while(--i > 0) { - mdio_delay(); - if(ioread32(ioaddr + CSR10) & 0x10000000) - break; - } - retval = ioread32(ioaddr + CSR10); - spin_unlock_irqrestore(&tp->mii_lock, flags); - return retval & 0xFFFF; - } /* Establish sync by sending at least 32 logic ones. */ for (i = 32; i >= 0; i--) { iowrite32(MDIO_ENB | MDIO_DATA_WRITE1, mdio_addr); @@ -159,23 +140,6 @@ void tulip_mdio_write(struct net_device *dev, int phy_id, int location, int val) spin_unlock_irqrestore(&tp->mii_lock, flags); return; } - if (tp->chip_id == ULI526X && tp->revision >= 0x40) { - int value; - int i = 1000; - - value = ioread32(ioaddr + CSR9); - iowrite32(value & 0xFFEFFFFF, ioaddr + CSR9); - - value = (phy_id << 21) | (location << 16) | 0x04000000 | (val & 0xFFFF); - iowrite32(value, ioaddr + CSR10); - - while(--i > 0) { - if (ioread32(ioaddr + CSR10) & 0x10000000) - break; - } - spin_unlock_irqrestore(&tp->mii_lock, flags); - return; - } /* Establish sync by sending 32 logic ones. */ for (i = 32; i >= 0; i--) { diff --git a/drivers/net/tulip/timer.c b/drivers/net/tulip/timer.c index 69156828355..e058a9fbfe8 100644 --- a/drivers/net/tulip/timer.c +++ b/drivers/net/tulip/timer.c @@ -39,7 +39,6 @@ void tulip_timer(unsigned long data) case MX98713: case COMPEX9881: case DM910X: - case ULI526X: default: { struct medialeaf *mleaf; unsigned char *p; diff --git a/drivers/net/tulip/tulip.h b/drivers/net/tulip/tulip.h index 20346d847d9..05d2d96f7be 100644 --- a/drivers/net/tulip/tulip.h +++ b/drivers/net/tulip/tulip.h @@ -88,7 +88,6 @@ enum chips { I21145, DM910X, CONEXANT, - ULI526X }; @@ -482,11 +481,8 @@ static inline void tulip_stop_rxtx(struct tulip_private *tp) static inline void tulip_restart_rxtx(struct tulip_private *tp) { - if(!(tp->chip_id == ULI526X && - (tp->revision == 0x40 || tp->revision == 0x50))) { - tulip_stop_rxtx(tp); - udelay(5); - } + tulip_stop_rxtx(tp); + udelay(5); tulip_start_rxtx(tp); } diff --git a/drivers/net/tulip/tulip_core.c b/drivers/net/tulip/tulip_core.c index d45d8f56e5b..05da5bea564 100644 --- a/drivers/net/tulip/tulip_core.c +++ b/drivers/net/tulip/tulip_core.c @@ -199,9 +199,6 @@ struct tulip_chip_table tulip_tbl[] = { { "Conexant LANfinity", 256, 0x0001ebef, HAS_MII | HAS_ACPI, tulip_timer }, - /* ULi526X */ - { "ULi M5261/M5263", 128, 0x0001ebef, - HAS_MII | HAS_MEDIA_TABLE | CSR12_IN_SROM | HAS_ACPI, tulip_timer }, }; @@ -239,8 +236,6 @@ static struct pci_device_id tulip_pci_tbl[] = { { 0x1737, 0xAB09, PCI_ANY_ID, PCI_ANY_ID, 0, 0, COMET }, { 0x1737, 0xAB08, PCI_ANY_ID, PCI_ANY_ID, 0, 0, COMET }, { 0x17B3, 0xAB08, PCI_ANY_ID, PCI_ANY_ID, 0, 0, COMET }, - { 0x10b9, 0x5261, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ULI526X }, /* ALi 1563 integrated ethernet */ - { 0x10b9, 0x5263, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ULI526X }, /* ALi 1563 integrated ethernet */ { 0x10b7, 0x9300, PCI_ANY_ID, PCI_ANY_ID, 0, 0, COMET }, /* 3Com 3CSOHO100B-TX */ { 0x14ea, 0xab08, PCI_ANY_ID, PCI_ANY_ID, 0, 0, COMET }, /* Planex FNW-3602-TX */ { } /* terminate list */ @@ -522,7 +517,7 @@ static void tulip_tx_timeout(struct net_device *dev) dev->name); } else if (tp->chip_id == DC21140 || tp->chip_id == DC21142 || tp->chip_id == MX98713 || tp->chip_id == COMPEX9881 - || tp->chip_id == DM910X || tp->chip_id == ULI526X) { + || tp->chip_id == DM910X) { printk(KERN_WARNING "%s: 21140 transmit timed out, status %8.8x, " "SIA %8.8x %8.8x %8.8x %8.8x, resetting...\n", dev->name, ioread32(ioaddr + CSR5), ioread32(ioaddr + CSR12), @@ -1103,18 +1098,16 @@ static void set_rx_mode(struct net_device *dev) entry = tp->cur_tx++ % TX_RING_SIZE; if (entry != 0) { - /* Avoid a chip errata by prefixing a dummy entry. Don't do - this on the ULI526X as it triggers a different problem */ - if (!(tp->chip_id == ULI526X && (tp->revision == 0x40 || tp->revision == 0x50))) { - tp->tx_buffers[entry].skb = NULL; - tp->tx_buffers[entry].mapping = 0; - tp->tx_ring[entry].length = - (entry == TX_RING_SIZE-1) ? cpu_to_le32(DESC_RING_WRAP) : 0; - tp->tx_ring[entry].buffer1 = 0; - /* Must set DescOwned later to avoid race with chip */ - dummy = entry; - entry = tp->cur_tx++ % TX_RING_SIZE; - } + /* Avoid a chip errata by prefixing a dummy entry. */ + tp->tx_buffers[entry].skb = NULL; + tp->tx_buffers[entry].mapping = 0; + tp->tx_ring[entry].length = + (entry == TX_RING_SIZE-1) ? cpu_to_le32(DESC_RING_WRAP) : 0; + tp->tx_ring[entry].buffer1 = 0; + /* Must set DescOwned later to avoid race with chip */ + dummy = entry; + entry = tp->cur_tx++ % TX_RING_SIZE; + } tp->tx_buffers[entry].skb = NULL; @@ -1235,10 +1228,6 @@ static int tulip_uli_dm_quirk(struct pci_dev *pdev) { if (pdev->vendor == 0x1282 && pdev->device == 0x9102) return 1; - if (pdev->vendor == 0x10b9 && pdev->device == 0x5261) - return 1; - if (pdev->vendor == 0x10b9 && pdev->device == 0x5263) - return 1; return 0; } @@ -1680,7 +1669,6 @@ static int __devinit tulip_init_one (struct pci_dev *pdev, switch (chip_idx) { case DC21140: case DM910X: - case ULI526X: default: if (tp->mtable) iowrite32(tp->mtable->csr12dir | 0x100, ioaddr + CSR12); -- cgit v1.2.3 From 414ed537995617f4cbcab65e193f26a2b2dcfa5e Mon Sep 17 00:00:00 2001 From: Dave Airlie Date: Tue, 16 Aug 2005 20:43:16 +1000 Subject: drm: add initial r300 3D support. This adds initial r300 3D support to the radeon DRM. From: Nicolai Haehnle, Vladimir Dergachev, and others. Signed-off-by: David Airlie --- drivers/char/drm/Makefile | 2 +- drivers/char/drm/drm_pciids.h | 13 + drivers/char/drm/r300_cmdbuf.c | 801 ++++++++++++++++++++++ drivers/char/drm/r300_reg.h | 1412 +++++++++++++++++++++++++++++++++++++++ drivers/char/drm/radeon_cp.c | 13 + drivers/char/drm/radeon_drm.h | 46 ++ drivers/char/drm/radeon_drv.h | 29 +- drivers/char/drm/radeon_state.c | 11 + 8 files changed, 2325 insertions(+), 2 deletions(-) create mode 100644 drivers/char/drm/r300_cmdbuf.c create mode 100644 drivers/char/drm/r300_reg.h diff --git a/drivers/char/drm/Makefile b/drivers/char/drm/Makefile index 1945138cb8f..e41060c7622 100644 --- a/drivers/char/drm/Makefile +++ b/drivers/char/drm/Makefile @@ -14,7 +14,7 @@ mga-objs := mga_drv.o mga_dma.o mga_state.o mga_warp.o mga_irq.o i810-objs := i810_drv.o i810_dma.o i830-objs := i830_drv.o i830_dma.o i830_irq.o i915-objs := i915_drv.o i915_dma.o i915_irq.o i915_mem.o -radeon-objs := radeon_drv.o radeon_cp.o radeon_state.o radeon_mem.o radeon_irq.o +radeon-objs := radeon_drv.o radeon_cp.o radeon_state.o radeon_mem.o radeon_irq.o r300_cmdbuf.o ffb-objs := ffb_drv.o ffb_context.o sis-objs := sis_drv.o sis_ds.o sis_mm.o savage-objs := savage_drv.o savage_bci.o savage_state.o diff --git a/drivers/char/drm/drm_pciids.h b/drivers/char/drm/drm_pciids.h index 8e264f9c1a1..1874c1fd171 100644 --- a/drivers/char/drm/drm_pciids.h +++ b/drivers/char/drm/drm_pciids.h @@ -25,6 +25,8 @@ {0x1002, 0x4965, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_R250}, \ {0x1002, 0x4966, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_R250}, \ {0x1002, 0x4967, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_R250}, \ + {0x1002, 0x4A49, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_R420}, \ + {0x1002, 0x4A4B, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_R420}, \ {0x1002, 0x4C57, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV200|CHIP_IS_MOBILITY}, \ {0x1002, 0x4C58, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV200|CHIP_IS_MOBILITY}, \ {0x1002, 0x4C59, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV100|CHIP_IS_MOBILITY}, \ @@ -33,7 +35,17 @@ {0x1002, 0x4C65, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_R250|CHIP_IS_MOBILITY}, \ {0x1002, 0x4C66, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_R250|CHIP_IS_MOBILITY}, \ {0x1002, 0x4C67, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_R250|CHIP_IS_MOBILITY}, \ + {0x1002, 0x4E44, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_R300}, \ + {0x1002, 0x4E45, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_R300}, \ + {0x1002, 0x4E46, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV350}, \ + {0x1002, 0x4E47, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_R300}, \ + {0x1002, 0x4E48, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_R350}, \ + {0x1002, 0x4E49, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_R350}, \ + {0x1002, 0x4E4A, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV350}, \ + {0x1002, 0x4E4B, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_R350}, \ {0x1002, 0x4E50, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV350|CHIP_IS_MOBILITY}, \ + {0x1002, 0x4E51, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV350|CHIP_IS_MOBILITY}, \ + {0x1002, 0x4E54, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV350|CHIP_IS_MOBILITY}, \ {0x1002, 0x5144, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_R100|CHIP_SINGLE_CRTC}, \ {0x1002, 0x5145, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_R100|CHIP_SINGLE_CRTC}, \ {0x1002, 0x5146, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_R100|CHIP_SINGLE_CRTC}, \ @@ -56,6 +68,7 @@ {0x1002, 0x516A, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_R200}, \ {0x1002, 0x516B, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_R200}, \ {0x1002, 0x516C, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_R200}, \ + {0x1002, 0x5460, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV350}, \ {0x1002, 0x5834, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RS300|CHIP_IS_IGP}, \ {0x1002, 0x5835, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RS300|CHIP_IS_IGP|CHIP_IS_MOBILITY}, \ {0x1002, 0x5836, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RS300|CHIP_IS_IGP}, \ diff --git a/drivers/char/drm/r300_cmdbuf.c b/drivers/char/drm/r300_cmdbuf.c new file mode 100644 index 00000000000..623f1f460cb --- /dev/null +++ b/drivers/char/drm/r300_cmdbuf.c @@ -0,0 +1,801 @@ +/* r300_cmdbuf.c -- Command buffer emission for R300 -*- linux-c -*- + * + * Copyright (C) The Weather Channel, Inc. 2002. + * Copyright (C) 2004 Nicolai Haehnle. + * All Rights Reserved. + * + * The Weather Channel (TM) funded Tungsten Graphics to develop the + * initial release of the Radeon 8500 driver under the XFree86 license. + * This notice must be preserved. + * + * Permission is hereby granted, free of charge, to any person obtaining a + * copy of this software and associated documentation files (the "Software"), + * to deal in the Software without restriction, including without limitation + * the rights to use, copy, modify, merge, publish, distribute, sublicense, + * and/or sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice (including the next + * paragraph) shall be included in all copies or substantial portions of the + * Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL + * PRECISION INSIGHT AND/OR ITS SUPPLIERS BE LIABLE FOR ANY CLAIM, DAMAGES OR + * OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, + * ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER + * DEALINGS IN THE SOFTWARE. + * + * Authors: + * Nicolai Haehnle + */ + +#include "drmP.h" +#include "drm.h" +#include "radeon_drm.h" +#include "radeon_drv.h" +#include "r300_reg.h" + + +#define R300_SIMULTANEOUS_CLIPRECTS 4 + +/* Values for R300_RE_CLIPRECT_CNTL depending on the number of cliprects + */ +static const int r300_cliprect_cntl[4] = { + 0xAAAA, + 0xEEEE, + 0xFEFE, + 0xFFFE +}; + + +/** + * Emit up to R300_SIMULTANEOUS_CLIPRECTS cliprects from the given command + * buffer, starting with index n. + */ +static int r300_emit_cliprects(drm_radeon_private_t* dev_priv, + drm_radeon_cmd_buffer_t* cmdbuf, + int n) +{ + drm_clip_rect_t box; + int nr; + int i; + RING_LOCALS; + + nr = cmdbuf->nbox - n; + if (nr > R300_SIMULTANEOUS_CLIPRECTS) + nr = R300_SIMULTANEOUS_CLIPRECTS; + + DRM_DEBUG("%i cliprects\n", nr); + + if (nr) { + BEGIN_RING(6 + nr*2); + OUT_RING( CP_PACKET0( R300_RE_CLIPRECT_TL_0, nr*2 - 1 ) ); + + for(i = 0; i < nr; ++i) { + if (DRM_COPY_FROM_USER_UNCHECKED(&box, &cmdbuf->boxes[n+i], sizeof(box))) { + DRM_ERROR("copy cliprect faulted\n"); + return DRM_ERR(EFAULT); + } + + box.x1 = (box.x1 + R300_CLIPRECT_OFFSET) & R300_CLIPRECT_MASK; + box.y1 = (box.y1 + R300_CLIPRECT_OFFSET) & R300_CLIPRECT_MASK; + box.x2 = (box.x2 + R300_CLIPRECT_OFFSET) & R300_CLIPRECT_MASK; + box.y2 = (box.y2 + R300_CLIPRECT_OFFSET) & R300_CLIPRECT_MASK; + + OUT_RING((box.x1 << R300_CLIPRECT_X_SHIFT) | + (box.y1 << R300_CLIPRECT_Y_SHIFT)); + OUT_RING((box.x2 << R300_CLIPRECT_X_SHIFT) | + (box.y2 << R300_CLIPRECT_Y_SHIFT)); + } + + OUT_RING_REG( R300_RE_CLIPRECT_CNTL, r300_cliprect_cntl[nr-1] ); + + /* TODO/SECURITY: Force scissors to a safe value, otherwise the + * client might be able to trample over memory. + * The impact should be very limited, but I'd rather be safe than + * sorry. + */ + OUT_RING( CP_PACKET0( R300_RE_SCISSORS_TL, 1 ) ); + OUT_RING( 0 ); + OUT_RING( R300_SCISSORS_X_MASK | R300_SCISSORS_Y_MASK ); + ADVANCE_RING(); + } else { + /* Why we allow zero cliprect rendering: + * There are some commands in a command buffer that must be submitted + * even when there are no cliprects, e.g. DMA buffer discard + * or state setting (though state setting could be avoided by + * simulating a loss of context). + * + * Now since the cmdbuf interface is so chaotic right now (and is + * bound to remain that way for a bit until things settle down), + * it is basically impossible to filter out the commands that are + * necessary and those that aren't. + * + * So I choose the safe way and don't do any filtering at all; + * instead, I simply set up the engine so that all rendering + * can't produce any fragments. + */ + BEGIN_RING(2); + OUT_RING_REG( R300_RE_CLIPRECT_CNTL, 0 ); + ADVANCE_RING(); + } + + return 0; +} + +u8 r300_reg_flags[0x10000>>2]; + + +void r300_init_reg_flags(void) +{ + int i; + memset(r300_reg_flags, 0, 0x10000>>2); + #define ADD_RANGE_MARK(reg, count,mark) \ + for(i=((reg)>>2);i<((reg)>>2)+(count);i++)\ + r300_reg_flags[i]|=(mark); + + #define MARK_SAFE 1 + #define MARK_CHECK_OFFSET 2 + + #define ADD_RANGE(reg, count) ADD_RANGE_MARK(reg, count, MARK_SAFE) + + /* these match cmducs() command in r300_driver/r300/r300_cmdbuf.c */ + ADD_RANGE(R300_SE_VPORT_XSCALE, 6); + ADD_RANGE(0x2080, 1); + ADD_RANGE(R300_SE_VTE_CNTL, 2); + ADD_RANGE(0x2134, 2); + ADD_RANGE(0x2140, 1); + ADD_RANGE(R300_VAP_INPUT_CNTL_0, 2); + ADD_RANGE(0x21DC, 1); + ADD_RANGE(0x221C, 1); + ADD_RANGE(0x2220, 4); + ADD_RANGE(0x2288, 1); + ADD_RANGE(R300_VAP_OUTPUT_VTX_FMT_0, 2); + ADD_RANGE(R300_VAP_PVS_CNTL_1, 3); + ADD_RANGE(R300_GB_ENABLE, 1); + ADD_RANGE(R300_GB_MSPOS0, 5); + ADD_RANGE(R300_TX_ENABLE, 1); + ADD_RANGE(0x4200, 4); + ADD_RANGE(0x4214, 1); + ADD_RANGE(R300_RE_POINTSIZE, 1); + ADD_RANGE(0x4230, 3); + ADD_RANGE(R300_RE_LINE_CNT, 1); + ADD_RANGE(0x4238, 1); + ADD_RANGE(0x4260, 3); + ADD_RANGE(0x4274, 4); + ADD_RANGE(0x4288, 5); + ADD_RANGE(0x42A0, 1); + ADD_RANGE(R300_RE_ZBIAS_T_FACTOR, 4); + ADD_RANGE(0x42B4, 1); + ADD_RANGE(R300_RE_CULL_CNTL, 1); + ADD_RANGE(0x42C0, 2); + ADD_RANGE(R300_RS_CNTL_0, 2); + ADD_RANGE(R300_RS_INTERP_0, 8); + ADD_RANGE(R300_RS_ROUTE_0, 8); + ADD_RANGE(0x43A4, 2); + ADD_RANGE(0x43E8, 1); + ADD_RANGE(R300_PFS_CNTL_0, 3); + ADD_RANGE(R300_PFS_NODE_0, 4); + ADD_RANGE(R300_PFS_TEXI_0, 64); + ADD_RANGE(0x46A4, 5); + ADD_RANGE(R300_PFS_INSTR0_0, 64); + ADD_RANGE(R300_PFS_INSTR1_0, 64); + ADD_RANGE(R300_PFS_INSTR2_0, 64); + ADD_RANGE(R300_PFS_INSTR3_0, 64); + ADD_RANGE(0x4BC0, 1); + ADD_RANGE(0x4BC8, 3); + ADD_RANGE(R300_PP_ALPHA_TEST, 2); + ADD_RANGE(0x4BD8, 1); + ADD_RANGE(R300_PFS_PARAM_0_X, 64); + ADD_RANGE(0x4E00, 1); + ADD_RANGE(R300_RB3D_CBLEND, 2); + ADD_RANGE(R300_RB3D_COLORMASK, 1); + ADD_RANGE(0x4E10, 3); + ADD_RANGE_MARK(R300_RB3D_COLOROFFSET0, 1, MARK_CHECK_OFFSET); /* check offset */ + ADD_RANGE(R300_RB3D_COLORPITCH0, 1); + ADD_RANGE(0x4E50, 9); + ADD_RANGE(0x4E88, 1); + ADD_RANGE(0x4EA0, 2); + ADD_RANGE(R300_RB3D_ZSTENCIL_CNTL_0, 3); + ADD_RANGE(0x4F10, 4); + ADD_RANGE_MARK(R300_RB3D_DEPTHOFFSET, 1, MARK_CHECK_OFFSET); /* check offset */ + ADD_RANGE(R300_RB3D_DEPTHPITCH, 1); + ADD_RANGE(0x4F28, 1); + ADD_RANGE(0x4F30, 2); + ADD_RANGE(0x4F44, 1); + ADD_RANGE(0x4F54, 1); + + ADD_RANGE(R300_TX_FILTER_0, 16); + ADD_RANGE(R300_TX_UNK1_0, 16); + ADD_RANGE(R300_TX_SIZE_0, 16); + ADD_RANGE(R300_TX_FORMAT_0, 16); + /* Texture offset is dangerous and needs more checking */ + ADD_RANGE_MARK(R300_TX_OFFSET_0, 16, MARK_CHECK_OFFSET); + ADD_RANGE(R300_TX_UNK4_0, 16); + ADD_RANGE(R300_TX_BORDER_COLOR_0, 16); + + /* Sporadic registers used as primitives are emitted */ + ADD_RANGE(0x4f18, 1); + ADD_RANGE(R300_RB3D_DSTCACHE_CTLSTAT, 1); + ADD_RANGE(R300_VAP_INPUT_ROUTE_0_0, 8); + ADD_RANGE(R300_VAP_INPUT_ROUTE_1_0, 8); + +} + +static __inline__ int r300_check_range(unsigned reg, int count) +{ + int i; + if(reg & ~0xffff)return -1; + for(i=(reg>>2);i<(reg>>2)+count;i++) + if(r300_reg_flags[i]!=MARK_SAFE)return 1; + return 0; +} + + /* we expect offsets passed to the framebuffer to be either within video memory or + within AGP space */ +static __inline__ int r300_check_offset(drm_radeon_private_t* dev_priv, u32 offset) +{ + /* we realy want to check against end of video aperture + but this value is not being kept. + This code is correct for now (does the same thing as the + code that sets MC_FB_LOCATION) in radeon_cp.c */ + if((offset>=dev_priv->fb_location) && + (offsetgart_vm_start))return 0; + if((offset>=dev_priv->gart_vm_start) && + (offsetgart_vm_start+dev_priv->gart_size))return 0; + return 1; +} + +static __inline__ int r300_emit_carefully_checked_packet0(drm_radeon_private_t* dev_priv, + drm_radeon_cmd_buffer_t* cmdbuf, + drm_r300_cmd_header_t header) +{ + int reg; + int sz; + int i; + int values[64]; + RING_LOCALS; + + sz = header.packet0.count; + reg = (header.packet0.reghi << 8) | header.packet0.reglo; + + if((sz>64)||(sz<0)){ + DRM_ERROR("Cannot emit more than 64 values at a time (reg=%04x sz=%d)\n", reg, sz); + return DRM_ERR(EINVAL); + } + for(i=0;ibuf)[i]; + switch(r300_reg_flags[(reg>>2)+i]){ + case MARK_SAFE: + break; + case MARK_CHECK_OFFSET: + if(r300_check_offset(dev_priv, (u32)values[i])){ + DRM_ERROR("Offset failed range check (reg=%04x sz=%d)\n", reg, sz); + return DRM_ERR(EINVAL); + } + break; + default: + DRM_ERROR("Register %04x failed check as flag=%02x\n", reg+i*4, r300_reg_flags[(reg>>2)+i]); + return DRM_ERR(EINVAL); + } + } + + BEGIN_RING(1+sz); + OUT_RING( CP_PACKET0( reg, sz-1 ) ); + OUT_RING_TABLE( values, sz ); + ADVANCE_RING(); + + cmdbuf->buf += sz*4; + cmdbuf->bufsz -= sz*4; + + return 0; +} + +/** + * Emits a packet0 setting arbitrary registers. + * Called by r300_do_cp_cmdbuf. + * + * Note that checks are performed on contents and addresses of the registers + */ +static __inline__ int r300_emit_packet0(drm_radeon_private_t* dev_priv, + drm_radeon_cmd_buffer_t* cmdbuf, + drm_r300_cmd_header_t header) +{ + int reg; + int sz; + RING_LOCALS; + + sz = header.packet0.count; + reg = (header.packet0.reghi << 8) | header.packet0.reglo; + + if (!sz) + return 0; + + if (sz*4 > cmdbuf->bufsz) + return DRM_ERR(EINVAL); + + if (reg+sz*4 >= 0x10000){ + DRM_ERROR("No such registers in hardware reg=%04x sz=%d\n", reg, sz); + return DRM_ERR(EINVAL); + } + + if(r300_check_range(reg, sz)){ + /* go and check everything */ + return r300_emit_carefully_checked_packet0(dev_priv, cmdbuf, header); + } + /* the rest of the data is safe to emit, whatever the values the user passed */ + + BEGIN_RING(1+sz); + OUT_RING( CP_PACKET0( reg, sz-1 ) ); + OUT_RING_TABLE( (int __user*)cmdbuf->buf, sz ); + ADVANCE_RING(); + + cmdbuf->buf += sz*4; + cmdbuf->bufsz -= sz*4; + + return 0; +} + + +/** + * Uploads user-supplied vertex program instructions or parameters onto + * the graphics card. + * Called by r300_do_cp_cmdbuf. + */ +static __inline__ int r300_emit_vpu(drm_radeon_private_t* dev_priv, + drm_radeon_cmd_buffer_t* cmdbuf, + drm_r300_cmd_header_t header) +{ + int sz; + int addr; + RING_LOCALS; + + sz = header.vpu.count; + addr = (header.vpu.adrhi << 8) | header.vpu.adrlo; + + if (!sz) + return 0; + if (sz*16 > cmdbuf->bufsz) + return DRM_ERR(EINVAL); + + BEGIN_RING(5+sz*4); + /* Wait for VAP to come to senses.. */ + /* there is no need to emit it multiple times, (only once before VAP is programmed, + but this optimization is for later */ + OUT_RING_REG( R300_VAP_PVS_WAITIDLE, 0 ); + OUT_RING_REG( R300_VAP_PVS_UPLOAD_ADDRESS, addr ); + OUT_RING( CP_PACKET0_TABLE( R300_VAP_PVS_UPLOAD_DATA, sz*4 - 1 ) ); + OUT_RING_TABLE( (int __user*)cmdbuf->buf, sz*4 ); + + ADVANCE_RING(); + + cmdbuf->buf += sz*16; + cmdbuf->bufsz -= sz*16; + + return 0; +} + + +/** + * Emit a clear packet from userspace. + * Called by r300_emit_packet3. + */ +static __inline__ int r300_emit_clear(drm_radeon_private_t* dev_priv, + drm_radeon_cmd_buffer_t* cmdbuf) +{ + RING_LOCALS; + + if (8*4 > cmdbuf->bufsz) + return DRM_ERR(EINVAL); + + BEGIN_RING(10); + OUT_RING( CP_PACKET3( R200_3D_DRAW_IMMD_2, 8 ) ); + OUT_RING( R300_PRIM_TYPE_POINT|R300_PRIM_WALK_RING| + (1<buf, 8 ); + ADVANCE_RING(); + + cmdbuf->buf += 8*4; + cmdbuf->bufsz -= 8*4; + + return 0; +} + +static __inline__ int r300_emit_3d_load_vbpntr(drm_radeon_private_t* dev_priv, + drm_radeon_cmd_buffer_t* cmdbuf, + u32 header) +{ + int count, i,k; + #define MAX_ARRAY_PACKET 64 + u32 payload[MAX_ARRAY_PACKET]; + u32 narrays; + RING_LOCALS; + + count=(header>>16) & 0x3fff; + + if((count+1)>MAX_ARRAY_PACKET){ + DRM_ERROR("Too large payload in 3D_LOAD_VBPNTR (count=%d)\n", count); + return DRM_ERR(EINVAL); + } + memset(payload, 0, MAX_ARRAY_PACKET*4); + memcpy(payload, cmdbuf->buf+4, (count+1)*4); + + /* carefully check packet contents */ + + narrays=payload[0]; + k=0; + i=1; + while((kbuf += (count+2)*4; + cmdbuf->bufsz -= (count+2)*4; + + return 0; +} + +static __inline__ int r300_emit_raw_packet3(drm_radeon_private_t* dev_priv, + drm_radeon_cmd_buffer_t* cmdbuf) +{ + u32 header; + int count; + RING_LOCALS; + + if (4 > cmdbuf->bufsz) + return DRM_ERR(EINVAL); + + /* Fixme !! This simply emits a packet without much checking. + We need to be smarter. */ + + /* obtain first word - actual packet3 header */ + header = *(u32 __user*)cmdbuf->buf; + + /* Is it packet 3 ? */ + if( (header>>30)!=0x3 ) { + DRM_ERROR("Not a packet3 header (0x%08x)\n", header); + return DRM_ERR(EINVAL); + } + + count=(header>>16) & 0x3fff; + + /* Check again now that we know how much data to expect */ + if ((count+2)*4 > cmdbuf->bufsz){ + DRM_ERROR("Expected packet3 of length %d but have only %d bytes left\n", + (count+2)*4, cmdbuf->bufsz); + return DRM_ERR(EINVAL); + } + + /* Is it a packet type we know about ? */ + switch(header & 0xff00){ + case RADEON_3D_LOAD_VBPNTR: /* load vertex array pointers */ + return r300_emit_3d_load_vbpntr(dev_priv, cmdbuf, header); + + case RADEON_CP_3D_DRAW_IMMD_2: /* triggers drawing using in-packet vertex data */ + case RADEON_CP_3D_DRAW_VBUF_2: /* triggers drawing of vertex buffers setup elsewhere */ + case RADEON_CP_3D_DRAW_INDX_2: /* triggers drawing using indices to vertex buffer */ + case RADEON_CP_INDX_BUFFER: /* DRAW_INDX_2 without INDX_BUFFER seems to lock up the gpu */ + case RADEON_WAIT_FOR_IDLE: + case RADEON_CP_NOP: + /* these packets are safe */ + break; + default: + DRM_ERROR("Unknown packet3 header (0x%08x)\n", header); + return DRM_ERR(EINVAL); + } + + + BEGIN_RING(count+2); + OUT_RING(header); + OUT_RING_TABLE( (int __user*)(cmdbuf->buf+4), count+1); + ADVANCE_RING(); + + cmdbuf->buf += (count+2)*4; + cmdbuf->bufsz -= (count+2)*4; + + return 0; +} + + +/** + * Emit a rendering packet3 from userspace. + * Called by r300_do_cp_cmdbuf. + */ +static __inline__ int r300_emit_packet3(drm_radeon_private_t* dev_priv, + drm_radeon_cmd_buffer_t* cmdbuf, + drm_r300_cmd_header_t header) +{ + int n; + int ret; + char __user* orig_buf = cmdbuf->buf; + int orig_bufsz = cmdbuf->bufsz; + + /* This is a do-while-loop so that we run the interior at least once, + * even if cmdbuf->nbox is 0. Compare r300_emit_cliprects for rationale. + */ + n = 0; + do { + if (cmdbuf->nbox > R300_SIMULTANEOUS_CLIPRECTS) { + ret = r300_emit_cliprects(dev_priv, cmdbuf, n); + if (ret) + return ret; + + cmdbuf->buf = orig_buf; + cmdbuf->bufsz = orig_bufsz; + } + + switch(header.packet3.packet) { + case R300_CMD_PACKET3_CLEAR: + DRM_DEBUG("R300_CMD_PACKET3_CLEAR\n"); + ret = r300_emit_clear(dev_priv, cmdbuf); + if (ret) { + DRM_ERROR("r300_emit_clear failed\n"); + return ret; + } + break; + + case R300_CMD_PACKET3_RAW: + DRM_DEBUG("R300_CMD_PACKET3_RAW\n"); + ret = r300_emit_raw_packet3(dev_priv, cmdbuf); + if (ret) { + DRM_ERROR("r300_emit_raw_packet3 failed\n"); + return ret; + } + break; + + default: + DRM_ERROR("bad packet3 type %i at %p\n", + header.packet3.packet, + cmdbuf->buf - sizeof(header)); + return DRM_ERR(EINVAL); + } + + n += R300_SIMULTANEOUS_CLIPRECTS; + } while(n < cmdbuf->nbox); + + return 0; +} + +/* Some of the R300 chips seem to be extremely touchy about the two registers + * that are configured in r300_pacify. + * Among the worst offenders seems to be the R300 ND (0x4E44): When userspace + * sends a command buffer that contains only state setting commands and a + * vertex program/parameter upload sequence, this will eventually lead to a + * lockup, unless the sequence is bracketed by calls to r300_pacify. + * So we should take great care to *always* call r300_pacify before + * *anything* 3D related, and again afterwards. This is what the + * call bracket in r300_do_cp_cmdbuf is for. + */ + +/** + * Emit the sequence to pacify R300. + */ +static __inline__ void r300_pacify(drm_radeon_private_t* dev_priv) +{ + RING_LOCALS; + + BEGIN_RING(6); + OUT_RING( CP_PACKET0( R300_RB3D_DSTCACHE_CTLSTAT, 0 ) ); + OUT_RING( 0xa ); + OUT_RING( CP_PACKET0( 0x4f18, 0 ) ); + OUT_RING( 0x3 ); + OUT_RING( CP_PACKET3( RADEON_CP_NOP, 0 ) ); + OUT_RING( 0x0 ); + ADVANCE_RING(); +} + + +/** + * Called by r300_do_cp_cmdbuf to update the internal buffer age and state. + * The actual age emit is done by r300_do_cp_cmdbuf, which is why you must + * be careful about how this function is called. + */ +static void r300_discard_buffer(drm_device_t * dev, drm_buf_t * buf) +{ + drm_radeon_private_t *dev_priv = dev->dev_private; + drm_radeon_buf_priv_t *buf_priv = buf->dev_private; + + buf_priv->age = ++dev_priv->sarea_priv->last_dispatch; + buf->pending = 1; + buf->used = 0; +} + + +/** + * Parses and validates a user-supplied command buffer and emits appropriate + * commands on the DMA ring buffer. + * Called by the ioctl handler function radeon_cp_cmdbuf. + */ +int r300_do_cp_cmdbuf(drm_device_t* dev, + DRMFILE filp, + drm_file_t* filp_priv, + drm_radeon_cmd_buffer_t* cmdbuf) +{ + drm_radeon_private_t *dev_priv = dev->dev_private; + drm_device_dma_t *dma = dev->dma; + drm_buf_t *buf = NULL; + int emit_dispatch_age = 0; + int ret = 0; + + DRM_DEBUG("\n"); + + /* See the comment above r300_emit_begin3d for why this call must be here, + * and what the cleanup gotos are for. */ + r300_pacify(dev_priv); + + if (cmdbuf->nbox <= R300_SIMULTANEOUS_CLIPRECTS) { + ret = r300_emit_cliprects(dev_priv, cmdbuf, 0); + if (ret) + goto cleanup; + } + + while(cmdbuf->bufsz >= sizeof(drm_r300_cmd_header_t)) { + int idx; + drm_r300_cmd_header_t header; + + header.u = *(unsigned int *)cmdbuf->buf; + + cmdbuf->buf += sizeof(header); + cmdbuf->bufsz -= sizeof(header); + + switch(header.header.cmd_type) { + case R300_CMD_PACKET0: + DRM_DEBUG("R300_CMD_PACKET0\n"); + ret = r300_emit_packet0(dev_priv, cmdbuf, header); + if (ret) { + DRM_ERROR("r300_emit_packet0 failed\n"); + goto cleanup; + } + break; + + case R300_CMD_VPU: + DRM_DEBUG("R300_CMD_VPU\n"); + ret = r300_emit_vpu(dev_priv, cmdbuf, header); + if (ret) { + DRM_ERROR("r300_emit_vpu failed\n"); + goto cleanup; + } + break; + + case R300_CMD_PACKET3: + DRM_DEBUG("R300_CMD_PACKET3\n"); + ret = r300_emit_packet3(dev_priv, cmdbuf, header); + if (ret) { + DRM_ERROR("r300_emit_packet3 failed\n"); + goto cleanup; + } + break; + + case R300_CMD_END3D: + DRM_DEBUG("R300_CMD_END3D\n"); + /* TODO: + Ideally userspace driver should not need to issue this call, + i.e. the drm driver should issue it automatically and prevent + lockups. + + In practice, we do not understand why this call is needed and what + it does (except for some vague guesses that it has to do with cache + coherence) and so the user space driver does it. + + Once we are sure which uses prevent lockups the code could be moved + into the kernel and the userspace driver will not + need to use this command. + + Note that issuing this command does not hurt anything + except, possibly, performance */ + r300_pacify(dev_priv); + break; + + case R300_CMD_CP_DELAY: + /* simple enough, we can do it here */ + DRM_DEBUG("R300_CMD_CP_DELAY\n"); + { + int i; + RING_LOCALS; + + BEGIN_RING(header.delay.count); + for(i=0;i= dma->buf_count) { + DRM_ERROR("buffer index %d (of %d max)\n", + idx, dma->buf_count - 1); + ret = DRM_ERR(EINVAL); + goto cleanup; + } + + buf = dma->buflist[idx]; + if (buf->filp != filp || buf->pending) { + DRM_ERROR("bad buffer %p %p %d\n", + buf->filp, filp, buf->pending); + ret = DRM_ERR(EINVAL); + goto cleanup; + } + + emit_dispatch_age = 1; + r300_discard_buffer(dev, buf); + break; + + case R300_CMD_WAIT: + /* simple enough, we can do it here */ + DRM_DEBUG("R300_CMD_WAIT\n"); + if(header.wait.flags==0)break; /* nothing to do */ + + { + RING_LOCALS; + + BEGIN_RING(2); + OUT_RING( CP_PACKET0( RADEON_WAIT_UNTIL, 0 ) ); + OUT_RING( (header.wait.flags & 0xf)<<14 ); + ADVANCE_RING(); + } + break; + + default: + DRM_ERROR("bad cmd_type %i at %p\n", + header.header.cmd_type, + cmdbuf->buf - sizeof(header)); + ret = DRM_ERR(EINVAL); + goto cleanup; + } + } + + DRM_DEBUG("END\n"); + +cleanup: + r300_pacify(dev_priv); + + /* We emit the vertex buffer age here, outside the pacifier "brackets" + * for two reasons: + * (1) This may coalesce multiple age emissions into a single one and + * (2) more importantly, some chips lock up hard when scratch registers + * are written inside the pacifier bracket. + */ + if (emit_dispatch_age) { + RING_LOCALS; + + /* Emit the vertex buffer age */ + BEGIN_RING(2); + RADEON_DISPATCH_AGE(dev_priv->sarea_priv->last_dispatch); + ADVANCE_RING(); + } + + COMMIT_RING(); + + return ret; +} + diff --git a/drivers/char/drm/r300_reg.h b/drivers/char/drm/r300_reg.h new file mode 100644 index 00000000000..c3e7ca3dbe3 --- /dev/null +++ b/drivers/char/drm/r300_reg.h @@ -0,0 +1,1412 @@ +/************************************************************************** + +Copyright (C) 2004-2005 Nicolai Haehnle et al. + +Permission is hereby granted, free of charge, to any person obtaining a +copy of this software and associated documentation files (the "Software"), +to deal in the Software without restriction, including without limitation +on the rights to use, copy, modify, merge, publish, distribute, sub +license, and/or sell copies of the Software, and to permit persons to whom +the Software is furnished to do so, subject to the following conditions: + +The above copyright notice and this permission notice (including the next +paragraph) shall be included in all copies or substantial portions of the +Software. + +THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR +IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, +FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT. IN NO EVENT SHALL +THE AUTHOR(S) AND/OR THEIR SUPPLIERS BE LIABLE FOR ANY CLAIM, +DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR +OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE +USE OR OTHER DEALINGS IN THE SOFTWARE. + +**************************************************************************/ + +#ifndef _R300_REG_H +#define _R300_REG_H + +#define R300_MC_INIT_MISC_LAT_TIMER 0x180 +# define R300_MC_MISC__MC_CPR_INIT_LAT_SHIFT 0 +# define R300_MC_MISC__MC_VF_INIT_LAT_SHIFT 4 +# define R300_MC_MISC__MC_DISP0R_INIT_LAT_SHIFT 8 +# define R300_MC_MISC__MC_DISP1R_INIT_LAT_SHIFT 12 +# define R300_MC_MISC__MC_FIXED_INIT_LAT_SHIFT 16 +# define R300_MC_MISC__MC_E2R_INIT_LAT_SHIFT 20 +# define R300_MC_MISC__MC_SAME_PAGE_PRIO_SHIFT 24 +# define R300_MC_MISC__MC_GLOBW_INIT_LAT_SHIFT 28 + + +#define R300_MC_INIT_GFX_LAT_TIMER 0x154 +# define R300_MC_MISC__MC_G3D0R_INIT_LAT_SHIFT 0 +# define R300_MC_MISC__MC_G3D1R_INIT_LAT_SHIFT 4 +# define R300_MC_MISC__MC_G3D2R_INIT_LAT_SHIFT 8 +# define R300_MC_MISC__MC_G3D3R_INIT_LAT_SHIFT 12 +# define R300_MC_MISC__MC_TX0R_INIT_LAT_SHIFT 16 +# define R300_MC_MISC__MC_TX1R_INIT_LAT_SHIFT 20 +# define R300_MC_MISC__MC_GLOBR_INIT_LAT_SHIFT 24 +# define R300_MC_MISC__MC_GLOBW_FULL_LAT_SHIFT 28 + +/* +This file contains registers and constants for the R300. They have been +found mostly by examining command buffers captured using glxtest, as well +as by extrapolating some known registers and constants from the R200. + +I am fairly certain that they are correct unless stated otherwise in comments. +*/ + +#define R300_SE_VPORT_XSCALE 0x1D98 +#define R300_SE_VPORT_XOFFSET 0x1D9C +#define R300_SE_VPORT_YSCALE 0x1DA0 +#define R300_SE_VPORT_YOFFSET 0x1DA4 +#define R300_SE_VPORT_ZSCALE 0x1DA8 +#define R300_SE_VPORT_ZOFFSET 0x1DAC + + +/* This register is written directly and also starts data section in many 3d CP_PACKET3's */ +#define R300_VAP_VF_CNTL 0x2084 + +# define R300_VAP_VF_CNTL__PRIM_TYPE__SHIFT 0 +# define R300_VAP_VF_CNTL__PRIM_NONE (0<<0) +# define R300_VAP_VF_CNTL__PRIM_POINTS (1<<0) +# define R300_VAP_VF_CNTL__PRIM_LINES (2<<0) +# define R300_VAP_VF_CNTL__PRIM_LINE_STRIP (3<<0) +# define R300_VAP_VF_CNTL__PRIM_TRIANGLES (4<<0) +# define R300_VAP_VF_CNTL__PRIM_TRIANGLE_FAN (5<<0) +# define R300_VAP_VF_CNTL__PRIM_TRIANGLE_STRIP (6<<0) +# define R300_VAP_VF_CNTL__PRIM_LINE_LOOP (12<<0) +# define R300_VAP_VF_CNTL__PRIM_QUADS (13<<0) +# define R300_VAP_VF_CNTL__PRIM_QUAD_STRIP (14<<0) +# define R300_VAP_VF_CNTL__PRIM_POLYGON (15<<0) + +# define R300_VAP_VF_CNTL__PRIM_WALK__SHIFT 4 + /* State based - direct writes to registers trigger vertex generation */ +# define R300_VAP_VF_CNTL__PRIM_WALK_STATE_BASED (0<<4) +# define R300_VAP_VF_CNTL__PRIM_WALK_INDICES (1<<4) +# define R300_VAP_VF_CNTL__PRIM_WALK_VERTEX_LIST (2<<4) +# define R300_VAP_VF_CNTL__PRIM_WALK_VERTEX_EMBEDDED (3<<4) + + /* I don't think I saw these three used.. */ +# define R300_VAP_VF_CNTL__COLOR_ORDER__SHIFT 6 +# define R300_VAP_VF_CNTL__TCL_OUTPUT_CTL_ENA__SHIFT 9 +# define R300_VAP_VF_CNTL__PROG_STREAM_ENA__SHIFT 10 + + /* index size - when not set the indices are assumed to be 16 bit */ +# define R300_VAP_VF_CNTL__INDEX_SIZE_32bit (1<<11) + /* number of vertices */ +# define R300_VAP_VF_CNTL__NUM_VERTICES__SHIFT 16 + +/* BEGIN: Wild guesses */ +#define R300_VAP_OUTPUT_VTX_FMT_0 0x2090 +# define R300_VAP_OUTPUT_VTX_FMT_0__POS_PRESENT (1<<0) +# define R300_VAP_OUTPUT_VTX_FMT_0__COLOR_PRESENT (1<<1) +# define R300_VAP_OUTPUT_VTX_FMT_0__COLOR_1_PRESENT (1<<2) /* GUESS */ +# define R300_VAP_OUTPUT_VTX_FMT_0__COLOR_2_PRESENT (1<<3) /* GUESS */ +# define R300_VAP_OUTPUT_VTX_FMT_0__COLOR_3_PRESENT (1<<4) /* GUESS */ +# define R300_VAP_OUTPUT_VTX_FMT_0__PT_SIZE_PRESENT (1<<16) /* GUESS */ + +#define R300_VAP_OUTPUT_VTX_FMT_1 0x2094 +# define R300_VAP_OUTPUT_VTX_FMT_1__TEX_0_COMP_CNT_SHIFT 0 +# define R300_VAP_OUTPUT_VTX_FMT_1__TEX_1_COMP_CNT_SHIFT 3 +# define R300_VAP_OUTPUT_VTX_FMT_1__TEX_2_COMP_CNT_SHIFT 6 +# define R300_VAP_OUTPUT_VTX_FMT_1__TEX_3_COMP_CNT_SHIFT 9 +# define R300_VAP_OUTPUT_VTX_FMT_1__TEX_4_COMP_CNT_SHIFT 12 +# define R300_VAP_OUTPUT_VTX_FMT_1__TEX_5_COMP_CNT_SHIFT 15 +# define R300_VAP_OUTPUT_VTX_FMT_1__TEX_6_COMP_CNT_SHIFT 18 +# define R300_VAP_OUTPUT_VTX_FMT_1__TEX_7_COMP_CNT_SHIFT 21 +/* END */ + +#define R300_SE_VTE_CNTL 0x20b0 +# define R300_VPORT_X_SCALE_ENA 0x00000001 +# define R300_VPORT_X_OFFSET_ENA 0x00000002 +# define R300_VPORT_Y_SCALE_ENA 0x00000004 +# define R300_VPORT_Y_OFFSET_ENA 0x00000008 +# define R300_VPORT_Z_SCALE_ENA 0x00000010 +# define R300_VPORT_Z_OFFSET_ENA 0x00000020 +# define R300_VTX_XY_FMT 0x00000100 +# define R300_VTX_Z_FMT 0x00000200 +# define R300_VTX_W0_FMT 0x00000400 +# define R300_VTX_W0_NORMALIZE 0x00000800 +# define R300_VTX_ST_DENORMALIZED 0x00001000 + +/* BEGIN: Vertex data assembly - lots of uncertainties */ +/* gap */ +/* Where do we get our vertex data? +// +// Vertex data either comes either from immediate mode registers or from +// vertex arrays. +// There appears to be no mixed mode (though we can force the pitch of +// vertex arrays to 0, effectively reusing the same element over and over +// again). +// +// Immediate mode is controlled by the INPUT_CNTL registers. I am not sure +// if these registers influence vertex array processing. +// +// Vertex arrays are controlled via the 3D_LOAD_VBPNTR packet3. +// +// In both cases, vertex attributes are then passed through INPUT_ROUTE. + +// Beginning with INPUT_ROUTE_0_0 is a list of WORDs that route vertex data +// into the vertex processor's input registers. +// The first word routes the first input, the second word the second, etc. +// The corresponding input is routed into the register with the given index. +// The list is ended by a word with INPUT_ROUTE_END set. +// +// Always set COMPONENTS_4 in immediate mode. */ + +#define R300_VAP_INPUT_ROUTE_0_0 0x2150 +# define R300_INPUT_ROUTE_COMPONENTS_1 (0 << 0) +# define R300_INPUT_ROUTE_COMPONENTS_2 (1 << 0) +# define R300_INPUT_ROUTE_COMPONENTS_3 (2 << 0) +# define R300_INPUT_ROUTE_COMPONENTS_4 (3 << 0) +# define R300_INPUT_ROUTE_COMPONENTS_RGBA (4 << 0) /* GUESS */ +# define R300_VAP_INPUT_ROUTE_IDX_SHIFT 8 +# define R300_VAP_INPUT_ROUTE_IDX_MASK (31 << 8) /* GUESS */ +# define R300_VAP_INPUT_ROUTE_END (1 << 13) +# define R300_INPUT_ROUTE_IMMEDIATE_MODE (0 << 14) /* GUESS */ +# define R300_INPUT_ROUTE_FLOAT (1 << 14) /* GUESS */ +# define R300_INPUT_ROUTE_UNSIGNED_BYTE (2 << 14) /* GUESS */ +# define R300_INPUT_ROUTE_FLOAT_COLOR (3 << 14) /* GUESS */ +#define R300_VAP_INPUT_ROUTE_0_1 0x2154 +#define R300_VAP_INPUT_ROUTE_0_2 0x2158 +#define R300_VAP_INPUT_ROUTE_0_3 0x215C +#define R300_VAP_INPUT_ROUTE_0_4 0x2160 +#define R300_VAP_INPUT_ROUTE_0_5 0x2164 +#define R300_VAP_INPUT_ROUTE_0_6 0x2168 +#define R300_VAP_INPUT_ROUTE_0_7 0x216C + +/* gap */ +/* Notes: +// - always set up to produce at least two attributes: +// if vertex program uses only position, fglrx will set normal, too +// - INPUT_CNTL_0_COLOR and INPUT_CNTL_COLOR bits are always equal */ +#define R300_VAP_INPUT_CNTL_0 0x2180 +# define R300_INPUT_CNTL_0_COLOR 0x00000001 +#define R300_VAP_INPUT_CNTL_1 0x2184 +# define R300_INPUT_CNTL_POS 0x00000001 +# define R300_INPUT_CNTL_NORMAL 0x00000002 +# define R300_INPUT_CNTL_COLOR 0x00000004 +# define R300_INPUT_CNTL_TC0 0x00000400 +# define R300_INPUT_CNTL_TC1 0x00000800 +# define R300_INPUT_CNTL_TC2 0x00001000 /* GUESS */ +# define R300_INPUT_CNTL_TC3 0x00002000 /* GUESS */ +# define R300_INPUT_CNTL_TC4 0x00004000 /* GUESS */ +# define R300_INPUT_CNTL_TC5 0x00008000 /* GUESS */ +# define R300_INPUT_CNTL_TC6 0x00010000 /* GUESS */ +# define R300_INPUT_CNTL_TC7 0x00020000 /* GUESS */ + +/* gap */ +/* Words parallel to INPUT_ROUTE_0; All words that are active in INPUT_ROUTE_0 +// are set to a swizzling bit pattern, other words are 0. +// +// In immediate mode, the pattern is always set to xyzw. In vertex array +// mode, the swizzling pattern is e.g. used to set zw components in texture +// coordinates with only tweo components. */ +#define R300_VAP_INPUT_ROUTE_1_0 0x21E0 +# define R300_INPUT_ROUTE_SELECT_X 0 +# define R300_INPUT_ROUTE_SELECT_Y 1 +# define R300_INPUT_ROUTE_SELECT_Z 2 +# define R300_INPUT_ROUTE_SELECT_W 3 +# define R300_INPUT_ROUTE_SELECT_ZERO 4 +# define R300_INPUT_ROUTE_SELECT_ONE 5 +# define R300_INPUT_ROUTE_SELECT_MASK 7 +# define R300_INPUT_ROUTE_X_SHIFT 0 +# define R300_INPUT_ROUTE_Y_SHIFT 3 +# define R300_INPUT_ROUTE_Z_SHIFT 6 +# define R300_INPUT_ROUTE_W_SHIFT 9 +# define R300_INPUT_ROUTE_ENABLE (15 << 12) +#define R300_VAP_INPUT_ROUTE_1_1 0x21E4 +#define R300_VAP_INPUT_ROUTE_1_2 0x21E8 +#define R300_VAP_INPUT_ROUTE_1_3 0x21EC +#define R300_VAP_INPUT_ROUTE_1_4 0x21F0 +#define R300_VAP_INPUT_ROUTE_1_5 0x21F4 +#define R300_VAP_INPUT_ROUTE_1_6 0x21F8 +#define R300_VAP_INPUT_ROUTE_1_7 0x21FC + +/* END */ + +/* gap */ +/* BEGIN: Upload vertex program and data +// The programmable vertex shader unit has a memory bank of unknown size +// that can be written to in 16 byte units by writing the address into +// UPLOAD_ADDRESS, followed by data in UPLOAD_DATA (multiples of 4 DWORDs). +// +// Pointers into the memory bank are always in multiples of 16 bytes. +// +// The memory bank is divided into areas with fixed meaning. +// +// Starting at address UPLOAD_PROGRAM: Vertex program instructions. +// Native limits reported by drivers from ATI suggest size 256 (i.e. 4KB), +// whereas the difference between known addresses suggests size 512. +// +// Starting at address UPLOAD_PARAMETERS: Vertex program parameters. +// Native reported limits and the VPI layout suggest size 256, whereas +// difference between known addresses suggests size 512. +// +// At address UPLOAD_POINTSIZE is a vector (0, 0, ps, 0), where ps is the +// floating point pointsize. The exact purpose of this state is uncertain, +// as there is also the R300_RE_POINTSIZE register. +// +// Multiple vertex programs and parameter sets can be loaded at once, +// which could explain the size discrepancy. */ +#define R300_VAP_PVS_UPLOAD_ADDRESS 0x2200 +# define R300_PVS_UPLOAD_PROGRAM 0x00000000 +# define R300_PVS_UPLOAD_PARAMETERS 0x00000200 +# define R300_PVS_UPLOAD_POINTSIZE 0x00000406 +/* gap */ +#define R300_VAP_PVS_UPLOAD_DATA 0x2208 +/* END */ + +/* gap */ +/* I do not know the purpose of this register. However, I do know that +// it is set to 221C_CLEAR for clear operations and to 221C_NORMAL +// for normal rendering. */ +#define R300_VAP_UNKNOWN_221C 0x221C +# define R300_221C_NORMAL 0x00000000 +# define R300_221C_CLEAR 0x0001C000 + +/* gap */ +/* Sometimes, END_OF_PKT and 0x2284=0 are the only commands sent between +// rendering commands and overwriting vertex program parameters. +// Therefore, I suspect writing zero to 0x2284 synchronizes the engine and +// avoids bugs caused by still running shaders reading bad data from memory. */ +#define R300_VAP_PVS_WAITIDLE 0x2284 /* GUESS */ + +/* Absolutely no clue what this register is about. */ +#define R300_VAP_UNKNOWN_2288 0x2288 +# define R300_2288_R300 0x00750000 /* -- nh */ +# define R300_2288_RV350 0x0000FFFF /* -- Vladimir */ + +/* gap */ +/* Addresses are relative to the vertex program instruction area of the +// memory bank. PROGRAM_END points to the last instruction of the active +// program +// +// The meaning of the two UNKNOWN fields is obviously not known. However, +// experiments so far have shown that both *must* point to an instruction +// inside the vertex program, otherwise the GPU locks up. +// fglrx usually sets CNTL_3_UNKNOWN to the end of the program and +// CNTL_1_UNKNOWN points to instruction where last write to position takes place. +// Most likely this is used to ignore rest of the program in cases where group of verts arent visible. +// For some reason this "section" is sometimes accepted other instruction that have +// no relationship with position calculations. +*/ +#define R300_VAP_PVS_CNTL_1 0x22D0 +# define R300_PVS_CNTL_1_PROGRAM_START_SHIFT 0 +# define R300_PVS_CNTL_1_POS_END_SHIFT 10 +# define R300_PVS_CNTL_1_PROGRAM_END_SHIFT 20 +/* Addresses are relative the the vertex program parameters area. */ +#define R300_VAP_PVS_CNTL_2 0x22D4 +# define R300_PVS_CNTL_2_PARAM_OFFSET_SHIFT 0 +# define R300_PVS_CNTL_2_PARAM_COUNT_SHIFT 16 +#define R300_VAP_PVS_CNTL_3 0x22D8 +# define R300_PVS_CNTL_3_PROGRAM_UNKNOWN_SHIFT 10 +# define R300_PVS_CNTL_3_PROGRAM_UNKNOWN2_SHIFT 0 + +/* The entire range from 0x2300 to 0x2AC inclusive seems to be used for +// immediate vertices */ +#define R300_VAP_VTX_COLOR_R 0x2464 +#define R300_VAP_VTX_COLOR_G 0x2468 +#define R300_VAP_VTX_COLOR_B 0x246C +#define R300_VAP_VTX_POS_0_X_1 0x2490 /* used for glVertex2*() */ +#define R300_VAP_VTX_POS_0_Y_1 0x2494 +#define R300_VAP_VTX_COLOR_PKD 0x249C /* RGBA */ +#define R300_VAP_VTX_POS_0_X_2 0x24A0 /* used for glVertex3*() */ +#define R300_VAP_VTX_POS_0_Y_2 0x24A4 +#define R300_VAP_VTX_POS_0_Z_2 0x24A8 +#define R300_VAP_VTX_END_OF_PKT 0x24AC /* write 0 to indicate end of packet? */ + +/* gap */ + +/* These are values from r300_reg/r300_reg.h - they are known to be correct + and are here so we can use one register file instead of several + - Vladimir */ +#define R300_GB_VAP_RASTER_VTX_FMT_0 0x4000 +# define R300_GB_VAP_RASTER_VTX_FMT_0__POS_PRESENT (1<<0) +# define R300_GB_VAP_RASTER_VTX_FMT_0__COLOR_0_PRESENT (1<<1) +# define R300_GB_VAP_RASTER_VTX_FMT_0__COLOR_1_PRESENT (1<<2) +# define R300_GB_VAP_RASTER_VTX_FMT_0__COLOR_2_PRESENT (1<<3) +# define R300_GB_VAP_RASTER_VTX_FMT_0__COLOR_3_PRESENT (1<<4) +# define R300_GB_VAP_RASTER_VTX_FMT_0__COLOR_SPACE (0xf<<5) +# define R300_GB_VAP_RASTER_VTX_FMT_0__PT_SIZE_PRESENT (0x1<<16) + +#define R300_GB_VAP_RASTER_VTX_FMT_1 0x4004 + /* each of the following is 3 bits wide, specifies number + of components */ +# define R300_GB_VAP_RASTER_VTX_FMT_1__TEX_0_COMP_CNT_SHIFT 0 +# define R300_GB_VAP_RASTER_VTX_FMT_1__TEX_1_COMP_CNT_SHIFT 3 +# define R300_GB_VAP_RASTER_VTX_FMT_1__TEX_2_COMP_CNT_SHIFT 6 +# define R300_GB_VAP_RASTER_VTX_FMT_1__TEX_3_COMP_CNT_SHIFT 9 +# define R300_GB_VAP_RASTER_VTX_FMT_1__TEX_4_COMP_CNT_SHIFT 12 +# define R300_GB_VAP_RASTER_VTX_FMT_1__TEX_5_COMP_CNT_SHIFT 15 +# define R300_GB_VAP_RASTER_VTX_FMT_1__TEX_6_COMP_CNT_SHIFT 18 +# define R300_GB_VAP_RASTER_VTX_FMT_1__TEX_7_COMP_CNT_SHIFT 21 + +/* UNK30 seems to enables point to quad transformation on textures + (or something closely related to that). + This bit is rather fatal at the time being due to lackings at pixel shader side */ +#define R300_GB_ENABLE 0x4008 +# define R300_GB_POINT_STUFF_ENABLE (1<<0) +# define R300_GB_LINE_STUFF_ENABLE (1<<1) +# define R300_GB_TRIANGLE_STUFF_ENABLE (1<<2) +# define R300_GB_STENCIL_AUTO_ENABLE (1<<4) +# define R300_GB_UNK30 (1<<30) + /* each of the following is 2 bits wide */ +#define R300_GB_TEX_REPLICATE 0 +#define R300_GB_TEX_ST 1 +#define R300_GB_TEX_STR 2 +# define R300_GB_TEX0_SOURCE_SHIFT 16 +# define R300_GB_TEX1_SOURCE_SHIFT 18 +# define R300_GB_TEX2_SOURCE_SHIFT 20 +# define R300_GB_TEX3_SOURCE_SHIFT 22 +# define R300_GB_TEX4_SOURCE_SHIFT 24 +# define R300_GB_TEX5_SOURCE_SHIFT 26 +# define R300_GB_TEX6_SOURCE_SHIFT 28 +# define R300_GB_TEX7_SOURCE_SHIFT 30 + +/* MSPOS - positions for multisample antialiasing (?) */ +#define R300_GB_MSPOS0 0x4010 + /* shifts - each of the fields is 4 bits */ +# define R300_GB_MSPOS0__MS_X0_SHIFT 0 +# define R300_GB_MSPOS0__MS_Y0_SHIFT 4 +# define R300_GB_MSPOS0__MS_X1_SHIFT 8 +# define R300_GB_MSPOS0__MS_Y1_SHIFT 12 +# define R300_GB_MSPOS0__MS_X2_SHIFT 16 +# define R300_GB_MSPOS0__MS_Y2_SHIFT 20 +# define R300_GB_MSPOS0__MSBD0_Y 24 +# define R300_GB_MSPOS0__MSBD0_X 28 + +#define R300_GB_MSPOS1 0x4014 +# define R300_GB_MSPOS1__MS_X3_SHIFT 0 +# define R300_GB_MSPOS1__MS_Y3_SHIFT 4 +# define R300_GB_MSPOS1__MS_X4_SHIFT 8 +# define R300_GB_MSPOS1__MS_Y4_SHIFT 12 +# define R300_GB_MSPOS1__MS_X5_SHIFT 16 +# define R300_GB_MSPOS1__MS_Y5_SHIFT 20 +# define R300_GB_MSPOS1__MSBD1 24 + + +#define R300_GB_TILE_CONFIG 0x4018 +# define R300_GB_TILE_ENABLE (1<<0) +# define R300_GB_TILE_PIPE_COUNT_RV300 0 +# define R300_GB_TILE_PIPE_COUNT_R300 (3<<1) +# define R300_GB_TILE_PIPE_COUNT_R420 (7<<1) +# define R300_GB_TILE_SIZE_8 0 +# define R300_GB_TILE_SIZE_16 (1<<4) +# define R300_GB_TILE_SIZE_32 (2<<4) +# define R300_GB_SUPER_SIZE_1 (0<<6) +# define R300_GB_SUPER_SIZE_2 (1<<6) +# define R300_GB_SUPER_SIZE_4 (2<<6) +# define R300_GB_SUPER_SIZE_8 (3<<6) +# define R300_GB_SUPER_SIZE_16 (4<<6) +# define R300_GB_SUPER_SIZE_32 (5<<6) +# define R300_GB_SUPER_SIZE_64 (6<<6) +# define R300_GB_SUPER_SIZE_128 (7<<6) +# define R300_GB_SUPER_X_SHIFT 9 /* 3 bits wide */ +# define R300_GB_SUPER_Y_SHIFT 12 /* 3 bits wide */ +# define R300_GB_SUPER_TILE_A 0 +# define R300_GB_SUPER_TILE_B (1<<15) +# define R300_GB_SUBPIXEL_1_12 0 +# define R300_GB_SUBPIXEL_1_16 (1<<16) + +#define R300_GB_FIFO_SIZE 0x4024 + /* each of the following is 2 bits wide */ +#define R300_GB_FIFO_SIZE_32 0 +#define R300_GB_FIFO_SIZE_64 1 +#define R300_GB_FIFO_SIZE_128 2 +#define R300_GB_FIFO_SIZE_256 3 +# define R300_SC_IFIFO_SIZE_SHIFT 0 +# define R300_SC_TZFIFO_SIZE_SHIFT 2 +# define R300_SC_BFIFO_SIZE_SHIFT 4 + +# define R300_US_OFIFO_SIZE_SHIFT 12 +# define R300_US_WFIFO_SIZE_SHIFT 14 + /* the following use the same constants as above, but meaning is + is times 2 (i.e. instead of 32 words it means 64 */ +# define R300_RS_TFIFO_SIZE_SHIFT 6 +# define R300_RS_CFIFO_SIZE_SHIFT 8 +# define R300_US_RAM_SIZE_SHIFT 10 + /* watermarks, 3 bits wide */ +# define R300_RS_HIGHWATER_COL_SHIFT 16 +# define R300_RS_HIGHWATER_TEX_SHIFT 19 +# define R300_OFIFO_HIGHWATER_SHIFT 22 /* two bits only */ +# define R300_CUBE_FIFO_HIGHWATER_COL_SHIFT 24 + +#define R300_GB_SELECT 0x401C +# define R300_GB_FOG_SELECT_C0A 0 +# define R300_GB_FOG_SELECT_C1A 1 +# define R300_GB_FOG_SELECT_C2A 2 +# define R300_GB_FOG_SELECT_C3A 3 +# define R300_GB_FOG_SELECT_1_1_W 4 +# define R300_GB_FOG_SELECT_Z 5 +# define R300_GB_DEPTH_SELECT_Z 0 +# define R300_GB_DEPTH_SELECT_1_1_W (1<<3) +# define R300_GB_W_SELECT_1_W 0 +# define R300_GB_W_SELECT_1 (1<<4) + +#define R300_GB_AA_CONFIG 0x4020 +# define R300_AA_ENABLE 0x01 +# define R300_AA_SUBSAMPLES_2 0 +# define R300_AA_SUBSAMPLES_3 (1<<1) +# define R300_AA_SUBSAMPLES_4 (2<<1) +# define R300_AA_SUBSAMPLES_6 (3<<1) + +/* END */ + +/* gap */ +/* The upper enable bits are guessed, based on fglrx reported limits. */ +#define R300_TX_ENABLE 0x4104 +# define R300_TX_ENABLE_0 (1 << 0) +# define R300_TX_ENABLE_1 (1 << 1) +# define R300_TX_ENABLE_2 (1 << 2) +# define R300_TX_ENABLE_3 (1 << 3) +# define R300_TX_ENABLE_4 (1 << 4) +# define R300_TX_ENABLE_5 (1 << 5) +# define R300_TX_ENABLE_6 (1 << 6) +# define R300_TX_ENABLE_7 (1 << 7) +# define R300_TX_ENABLE_8 (1 << 8) +# define R300_TX_ENABLE_9 (1 << 9) +# define R300_TX_ENABLE_10 (1 << 10) +# define R300_TX_ENABLE_11 (1 << 11) +# define R300_TX_ENABLE_12 (1 << 12) +# define R300_TX_ENABLE_13 (1 << 13) +# define R300_TX_ENABLE_14 (1 << 14) +# define R300_TX_ENABLE_15 (1 << 15) + +/* The pointsize is given in multiples of 6. The pointsize can be +// enormous: Clear() renders a single point that fills the entire +// framebuffer. */ +#define R300_RE_POINTSIZE 0x421C +# define R300_POINTSIZE_Y_SHIFT 0 +# define R300_POINTSIZE_Y_MASK (0xFFFF << 0) /* GUESS */ +# define R300_POINTSIZE_X_SHIFT 16 +# define R300_POINTSIZE_X_MASK (0xFFFF << 16) /* GUESS */ +# define R300_POINTSIZE_MAX (R300_POINTSIZE_Y_MASK / 6) + +/* The line width is given in multiples of 6. + In default mode lines are classified as vertical lines. + HO: horizontal + VE: vertical or horizontal + HO & VE: no classification +*/ +#define R300_RE_LINE_CNT 0x4234 +# define R300_LINESIZE_SHIFT 0 +# define R300_LINESIZE_MASK (0xFFFF << 0) /* GUESS */ +# define R300_LINESIZE_MAX (R300_LINESIZE_MASK / 6) +# define R300_LINE_CNT_HO (1 << 16) +# define R300_LINE_CNT_VE (1 << 17) + +/* Some sort of scale or clamp value for texcoordless textures. */ +#define R300_RE_UNK4238 0x4238 + +#define R300_RE_SHADE_MODEL 0x4278 +# define R300_RE_SHADE_MODEL_SMOOTH 0x3aaaa +# define R300_RE_SHADE_MODEL_FLAT 0x39595 + +/* Dangerous */ +#define R300_RE_POLYGON_MODE 0x4288 +# define R300_PM_ENABLED (1 << 0) +# define R300_PM_FRONT_POINT (0 << 0) +# define R300_PM_BACK_POINT (0 << 0) +# define R300_PM_FRONT_LINE (1 << 4) +# define R300_PM_FRONT_FILL (1 << 5) +# define R300_PM_BACK_LINE (1 << 7) +# define R300_PM_BACK_FILL (1 << 8) + +/* Not sure why there are duplicate of factor and constant values. + My best guess so far is that there are seperate zbiases for test and write. + Ordering might be wrong. + Some of the tests indicate that fgl has a fallback implementation of zbias + via pixel shaders. */ +#define R300_RE_ZBIAS_T_FACTOR 0x42A4 +#define R300_RE_ZBIAS_T_CONSTANT 0x42A8 +#define R300_RE_ZBIAS_W_FACTOR 0x42AC +#define R300_RE_ZBIAS_W_CONSTANT 0x42B0 + +/* This register needs to be set to (1<<1) for RV350 to correctly + perform depth test (see --vb-triangles in r300_demo) + Don't know about other chips. - Vladimir + This is set to 3 when GL_POLYGON_OFFSET_FILL is on. + My guess is that there are two bits for each zbias primitive (FILL, LINE, POINT). + One to enable depth test and one for depth write. + Yet this doesnt explain why depth writes work ... + */ +#define R300_RE_OCCLUSION_CNTL 0x42B4 +# define R300_OCCLUSION_ON (1<<1) + +#define R300_RE_CULL_CNTL 0x42B8 +# define R300_CULL_FRONT (1 << 0) +# define R300_CULL_BACK (1 << 1) +# define R300_FRONT_FACE_CCW (0 << 2) +# define R300_FRONT_FACE_CW (1 << 2) + + +/* BEGIN: Rasterization / Interpolators - many guesses +// 0_UNKNOWN_18 has always been set except for clear operations. +// TC_CNT is the number of incoming texture coordinate sets (i.e. it depends +// on the vertex program, *not* the fragment program) */ +#define R300_RS_CNTL_0 0x4300 +# define R300_RS_CNTL_TC_CNT_SHIFT 2 +# define R300_RS_CNTL_TC_CNT_MASK (7 << 2) +# define R300_RS_CNTL_CI_CNT_SHIFT 7 /* number of color interpolators used */ +# define R300_RS_CNTL_0_UNKNOWN_18 (1 << 18) +/* Guess: RS_CNTL_1 holds the index of the highest used RS_ROUTE_n register. */ +#define R300_RS_CNTL_1 0x4304 + +/* gap */ +/* Only used for texture coordinates. +// Use the source field to route texture coordinate input from the vertex program +// to the desired interpolator. Note that the source field is relative to the +// outputs the vertex program *actually* writes. If a vertex program only writes +// texcoord[1], this will be source index 0. +// Set INTERP_USED on all interpolators that produce data used by the +// fragment program. INTERP_USED looks like a swizzling mask, but +// I haven't seen it used that way. +// +// Note: The _UNKNOWN constants are always set in their respective register. +// I don't know if this is necessary. */ +#define R300_RS_INTERP_0 0x4310 +#define R300_RS_INTERP_1 0x4314 +# define R300_RS_INTERP_1_UNKNOWN 0x40 +#define R300_RS_INTERP_2 0x4318 +# define R300_RS_INTERP_2_UNKNOWN 0x80 +#define R300_RS_INTERP_3 0x431C +# define R300_RS_INTERP_3_UNKNOWN 0xC0 +#define R300_RS_INTERP_4 0x4320 +#define R300_RS_INTERP_5 0x4324 +#define R300_RS_INTERP_6 0x4328 +#define R300_RS_INTERP_7 0x432C +# define R300_RS_INTERP_SRC_SHIFT 2 +# define R300_RS_INTERP_SRC_MASK (7 << 2) +# define R300_RS_INTERP_USED 0x00D10000 + +/* These DWORDs control how vertex data is routed into fragment program +// registers, after interpolators. */ +#define R300_RS_ROUTE_0 0x4330 +#define R300_RS_ROUTE_1 0x4334 +#define R300_RS_ROUTE_2 0x4338 +#define R300_RS_ROUTE_3 0x433C /* GUESS */ +#define R300_RS_ROUTE_4 0x4340 /* GUESS */ +#define R300_RS_ROUTE_5 0x4344 /* GUESS */ +#define R300_RS_ROUTE_6 0x4348 /* GUESS */ +#define R300_RS_ROUTE_7 0x434C /* GUESS */ +# define R300_RS_ROUTE_SOURCE_INTERP_0 0 +# define R300_RS_ROUTE_SOURCE_INTERP_1 1 +# define R300_RS_ROUTE_SOURCE_INTERP_2 2 +# define R300_RS_ROUTE_SOURCE_INTERP_3 3 +# define R300_RS_ROUTE_SOURCE_INTERP_4 4 +# define R300_RS_ROUTE_SOURCE_INTERP_5 5 /* GUESS */ +# define R300_RS_ROUTE_SOURCE_INTERP_6 6 /* GUESS */ +# define R300_RS_ROUTE_SOURCE_INTERP_7 7 /* GUESS */ +# define R300_RS_ROUTE_ENABLE (1 << 3) /* GUESS */ +# define R300_RS_ROUTE_DEST_SHIFT 6 +# define R300_RS_ROUTE_DEST_MASK (31 << 6) /* GUESS */ + +/* Special handling for color: When the fragment program uses color, +// the ROUTE_0_COLOR bit is set and ROUTE_0_COLOR_DEST contains the +// color register index. */ +# define R300_RS_ROUTE_0_COLOR (1 << 14) +# define R300_RS_ROUTE_0_COLOR_DEST_SHIFT 17 +# define R300_RS_ROUTE_0_COLOR_DEST_MASK (31 << 17) /* GUESS */ +/* As above, but for secondary color */ +# define R300_RS_ROUTE_1_COLOR1 (1 << 14) +# define R300_RS_ROUTE_1_COLOR1_DEST_SHIFT 17 +# define R300_RS_ROUTE_1_COLOR1_DEST_MASK (31 << 17) +# define R300_RS_ROUTE_1_UNKNOWN11 (1 << 11) +/* END */ + +/* BEGIN: Scissors and cliprects +// There are four clipping rectangles. Their corner coordinates are inclusive. +// Every pixel is assigned a number from 0 and 15 by setting bits 0-3 depending +// on whether the pixel is inside cliprects 0-3, respectively. For example, +// if a pixel is inside cliprects 0 and 1, but outside 2 and 3, it is assigned +// the number 3 (binary 0011). +// Iff the bit corresponding to the pixel's number in RE_CLIPRECT_CNTL is set, +// the pixel is rasterized. +// +// In addition to this, there is a scissors rectangle. Only pixels inside the +// scissors rectangle are drawn. (coordinates are inclusive) +// +// For some reason, the top-left corner of the framebuffer is at (1440, 1440) +// for the purpose of clipping and scissors. */ +#define R300_RE_CLIPRECT_TL_0 0x43B0 +#define R300_RE_CLIPRECT_BR_0 0x43B4 +#define R300_RE_CLIPRECT_TL_1 0x43B8 +#define R300_RE_CLIPRECT_BR_1 0x43BC +#define R300_RE_CLIPRECT_TL_2 0x43C0 +#define R300_RE_CLIPRECT_BR_2 0x43C4 +#define R300_RE_CLIPRECT_TL_3 0x43C8 +#define R300_RE_CLIPRECT_BR_3 0x43CC +# define R300_CLIPRECT_OFFSET 1440 +# define R300_CLIPRECT_MASK 0x1FFF +# define R300_CLIPRECT_X_SHIFT 0 +# define R300_CLIPRECT_X_MASK (0x1FFF << 0) +# define R300_CLIPRECT_Y_SHIFT 13 +# define R300_CLIPRECT_Y_MASK (0x1FFF << 13) +#define R300_RE_CLIPRECT_CNTL 0x43D0 +# define R300_CLIP_OUT (1 << 0) +# define R300_CLIP_0 (1 << 1) +# define R300_CLIP_1 (1 << 2) +# define R300_CLIP_10 (1 << 3) +# define R300_CLIP_2 (1 << 4) +# define R300_CLIP_20 (1 << 5) +# define R300_CLIP_21 (1 << 6) +# define R300_CLIP_210 (1 << 7) +# define R300_CLIP_3 (1 << 8) +# define R300_CLIP_30 (1 << 9) +# define R300_CLIP_31 (1 << 10) +# define R300_CLIP_310 (1 << 11) +# define R300_CLIP_32 (1 << 12) +# define R300_CLIP_320 (1 << 13) +# define R300_CLIP_321 (1 << 14) +# define R300_CLIP_3210 (1 << 15) + +/* gap */ +#define R300_RE_SCISSORS_TL 0x43E0 +#define R300_RE_SCISSORS_BR 0x43E4 +# define R300_SCISSORS_OFFSET 1440 +# define R300_SCISSORS_X_SHIFT 0 +# define R300_SCISSORS_X_MASK (0x1FFF << 0) +# define R300_SCISSORS_Y_SHIFT 13 +# define R300_SCISSORS_Y_MASK (0x1FFF << 13) +/* END */ + +/* BEGIN: Texture specification +// The texture specification dwords are grouped by meaning and not by texture unit. +// This means that e.g. the offset for texture image unit N is found in register +// TX_OFFSET_0 + (4*N) */ +#define R300_TX_FILTER_0 0x4400 +# define R300_TX_REPEAT 0 +# define R300_TX_MIRRORED 1 +# define R300_TX_CLAMP 4 +# define R300_TX_CLAMP_TO_EDGE 2 +# define R300_TX_CLAMP_TO_BORDER 6 +# define R300_TX_WRAP_S_SHIFT 0 +# define R300_TX_WRAP_S_MASK (7 << 0) +# define R300_TX_WRAP_T_SHIFT 3 +# define R300_TX_WRAP_T_MASK (7 << 3) +# define R300_TX_WRAP_Q_SHIFT 6 +# define R300_TX_WRAP_Q_MASK (7 << 6) +# define R300_TX_MAG_FILTER_NEAREST (1 << 9) +# define R300_TX_MAG_FILTER_LINEAR (2 << 9) +# define R300_TX_MAG_FILTER_MASK (3 << 9) +# define R300_TX_MIN_FILTER_NEAREST (1 << 11) +# define R300_TX_MIN_FILTER_LINEAR (2 << 11) +# define R300_TX_MIN_FILTER_NEAREST_MIP_NEAREST (5 << 11) +# define R300_TX_MIN_FILTER_NEAREST_MIP_LINEAR (9 << 11) +# define R300_TX_MIN_FILTER_LINEAR_MIP_NEAREST (6 << 11) +# define R300_TX_MIN_FILTER_LINEAR_MIP_LINEAR (10 << 11) + +/* NOTE: NEAREST doesnt seem to exist. + Im not seting MAG_FILTER_MASK and (3 << 11) on for all + anisotropy modes because that would void selected mag filter */ +# define R300_TX_MIN_FILTER_ANISO_NEAREST ((0 << 13) /*|R300_TX_MAG_FILTER_MASK|(3<<11)*/) +# define R300_TX_MIN_FILTER_ANISO_LINEAR ((0 << 13) /*|R300_TX_MAG_FILTER_MASK|(3<<11)*/) +# define R300_TX_MIN_FILTER_ANISO_NEAREST_MIP_NEAREST ((1 << 13) /*|R300_TX_MAG_FILTER_MASK|(3<<11)*/) +# define R300_TX_MIN_FILTER_ANISO_NEAREST_MIP_LINEAR ((2 << 13) /*|R300_TX_MAG_FILTER_MASK|(3<<11)*/) +# define R300_TX_MIN_FILTER_MASK ( (15 << 11) | (3 << 13) ) +# define R300_TX_MAX_ANISO_1_TO_1 (0 << 21) +# define R300_TX_MAX_ANISO_2_TO_1 (2 << 21) +# define R300_TX_MAX_ANISO_4_TO_1 (4 << 21) +# define R300_TX_MAX_ANISO_8_TO_1 (6 << 21) +# define R300_TX_MAX_ANISO_16_TO_1 (8 << 21) +# define R300_TX_MAX_ANISO_MASK (14 << 21) + +#define R300_TX_UNK1_0 0x4440 +# define R300_LOD_BIAS_MASK 0x1fff + +#define R300_TX_SIZE_0 0x4480 +# define R300_TX_WIDTHMASK_SHIFT 0 +# define R300_TX_WIDTHMASK_MASK (2047 << 0) +# define R300_TX_HEIGHTMASK_SHIFT 11 +# define R300_TX_HEIGHTMASK_MASK (2047 << 11) +# define R300_TX_UNK23 (1 << 23) +# define R300_TX_SIZE_SHIFT 26 /* largest of width, height */ +# define R300_TX_SIZE_MASK (15 << 26) +#define R300_TX_FORMAT_0 0x44C0 + /* The interpretation of the format word by Wladimir van der Laan */ + /* The X, Y, Z and W refer to the layout of the components. + They are given meanings as R, G, B and Alpha by the swizzle + specification */ +# define R300_TX_FORMAT_X8 0x0 +# define R300_TX_FORMAT_X16 0x1 +# define R300_TX_FORMAT_Y4X4 0x2 +# define R300_TX_FORMAT_Y8X8 0x3 +# define R300_TX_FORMAT_Y16X16 0x4 +# define R300_TX_FORMAT_Z3Y3X2 0x5 +# define R300_TX_FORMAT_Z5Y6X5 0x6 +# define R300_TX_FORMAT_Z6Y5X5 0x7 +# define R300_TX_FORMAT_Z11Y11X10 0x8 +# define R300_TX_FORMAT_Z10Y11X11 0x9 +# define R300_TX_FORMAT_W4Z4Y4X4 0xA +# define R300_TX_FORMAT_W1Z5Y5X5 0xB +# define R300_TX_FORMAT_W8Z8Y8X8 0xC +# define R300_TX_FORMAT_W2Z10Y10X10 0xD +# define R300_TX_FORMAT_W16Z16Y16X16 0xE +# define R300_TX_FORMAT_DXT1 0xF +# define R300_TX_FORMAT_DXT3 0x10 +# define R300_TX_FORMAT_DXT5 0x11 +# define R300_TX_FORMAT_D3DMFT_CxV8U8 0x12 /* no swizzle */ +# define R300_TX_FORMAT_A8R8G8B8 0x13 /* no swizzle */ +# define R300_TX_FORMAT_B8G8_B8G8 0x14 /* no swizzle */ +# define R300_TX_FORMAT_G8R8_G8B8 0x15 /* no swizzle */ + /* 0x16 - some 16 bit green format.. ?? */ +# define R300_TX_FORMAT_UNK25 (1 << 25) /* no swizzle */ + + /* gap */ + /* Floating point formats */ + /* Note - hardware supports both 16 and 32 bit floating point */ +# define R300_TX_FORMAT_FL_I16 0x18 +# define R300_TX_FORMAT_FL_I16A16 0x19 +# define R300_TX_FORMAT_FL_R16G16B16A16 0x1A +# define R300_TX_FORMAT_FL_I32 0x1B +# define R300_TX_FORMAT_FL_I32A32 0x1C +# define R300_TX_FORMAT_FL_R32G32B32A32 0x1D + /* alpha modes, convenience mostly */ + /* if you have alpha, pick constant appropriate to the + number of channels (1 for I8, 2 for I8A8, 4 for R8G8B8A8, etc */ +# define R300_TX_FORMAT_ALPHA_1CH 0x000 +# define R300_TX_FORMAT_ALPHA_2CH 0x200 +# define R300_TX_FORMAT_ALPHA_4CH 0x600 +# define R300_TX_FORMAT_ALPHA_NONE 0xA00 + /* Swizzling */ + /* constants */ +# define R300_TX_FORMAT_X 0 +# define R300_TX_FORMAT_Y 1 +# define R300_TX_FORMAT_Z 2 +# define R300_TX_FORMAT_W 3 +# define R300_TX_FORMAT_ZERO 4 +# define R300_TX_FORMAT_ONE 5 +# define R300_TX_FORMAT_CUT_Z 6 /* 2.0*Z, everything above 1.0 is set to 0.0 */ +# define R300_TX_FORMAT_CUT_W 7 /* 2.0*W, everything above 1.0 is set to 0.0 */ + +# define R300_TX_FORMAT_B_SHIFT 18 +# define R300_TX_FORMAT_G_SHIFT 15 +# define R300_TX_FORMAT_R_SHIFT 12 +# define R300_TX_FORMAT_A_SHIFT 9 + /* Convenience macro to take care of layout and swizzling */ +# define R300_EASY_TX_FORMAT(B, G, R, A, FMT) (\ + ((R300_TX_FORMAT_##B)<is_pci ) { + /* set RADEON_AGP_BASE here instead of relying on X from user space */ + RADEON_WRITE(RADEON_AGP_BASE, (unsigned int)dev->agp->base); RADEON_WRITE( RADEON_CP_RB_RPTR_ADDR, dev_priv->ring_rptr->offset - dev->agp->base @@ -1626,6 +1629,9 @@ int radeon_cp_init( DRM_IOCTL_ARGS ) DRM_COPY_FROM_USER_IOCTL( init, (drm_radeon_init_t __user *)data, sizeof(init) ); + if(init.func == RADEON_INIT_R300_CP) + r300_init_reg_flags(); + switch ( init.func ) { case RADEON_INIT_CP: case RADEON_INIT_R200_CP: @@ -2040,12 +2046,19 @@ int radeon_driver_preinit(struct drm_device *dev, unsigned long flags) case CHIP_RV200: case CHIP_R200: case CHIP_R300: + case CHIP_R420: dev_priv->flags |= CHIP_HAS_HIERZ; break; default: /* all other chips have no hierarchical z buffer */ break; } + + if (drm_device_is_agp(dev)) + dev_priv->flags |= CHIP_IS_AGP; + + DRM_DEBUG("%s card detected\n", + ((dev_priv->flags & CHIP_IS_AGP) ? "AGP" : "PCI")); return ret; } diff --git a/drivers/char/drm/radeon_drm.h b/drivers/char/drm/radeon_drm.h index c1e62d04798..3792798270a 100644 --- a/drivers/char/drm/radeon_drm.h +++ b/drivers/char/drm/radeon_drm.h @@ -195,6 +195,52 @@ typedef union { #define RADEON_WAIT_2D 0x1 #define RADEON_WAIT_3D 0x2 +/* Allowed parameters for R300_CMD_PACKET3 + */ +#define R300_CMD_PACKET3_CLEAR 0 +#define R300_CMD_PACKET3_RAW 1 + +/* Commands understood by cmd_buffer ioctl for R300. + * The interface has not been stabilized, so some of these may be removed + * and eventually reordered before stabilization. + */ +#define R300_CMD_PACKET0 1 +#define R300_CMD_VPU 2 /* emit vertex program upload */ +#define R300_CMD_PACKET3 3 /* emit a packet3 */ +#define R300_CMD_END3D 4 /* emit sequence ending 3d rendering */ +#define R300_CMD_CP_DELAY 5 +#define R300_CMD_DMA_DISCARD 6 +#define R300_CMD_WAIT 7 +# define R300_WAIT_2D 0x1 +# define R300_WAIT_3D 0x2 +# define R300_WAIT_2D_CLEAN 0x3 +# define R300_WAIT_3D_CLEAN 0x4 + +typedef union { + unsigned int u; + struct { + unsigned char cmd_type, pad0, pad1, pad2; + } header; + struct { + unsigned char cmd_type, count, reglo, reghi; + } packet0; + struct { + unsigned char cmd_type, count, adrlo, adrhi; + } vpu; + struct { + unsigned char cmd_type, packet, pad0, pad1; + } packet3; + struct { + unsigned char cmd_type, packet; + unsigned short count; /* amount of packet2 to emit */ + } delay; + struct { + unsigned char cmd_type, buf_idx, pad0, pad1; + } dma; + struct { + unsigned char cmd_type, flags, pad0, pad1; + } wait; +} drm_r300_cmd_header_t; #define RADEON_FRONT 0x1 #define RADEON_BACK 0x2 diff --git a/drivers/char/drm/radeon_drv.h b/drivers/char/drm/radeon_drv.h index e701dffe978..f12a963ede1 100644 --- a/drivers/char/drm/radeon_drv.h +++ b/drivers/char/drm/radeon_drv.h @@ -82,9 +82,10 @@ * - Add support for r100 cube maps * 1.16- Add R200_EMIT_PP_TRI_PERF_CNTL packet to support brilinear * texture filtering on r200 + * 1.17- Add initial support for R300 (3D). */ #define DRIVER_MAJOR 1 -#define DRIVER_MINOR 16 +#define DRIVER_MINOR 17 #define DRIVER_PATCHLEVEL 0 #define GET_RING_HEAD(dev_priv) DRM_READ32( (dev_priv)->ring_rptr, 0 ) @@ -106,7 +107,9 @@ enum radeon_family { CHIP_RV280, CHIP_R300, CHIP_RS300, + CHIP_R350, CHIP_RV350, + CHIP_R420, CHIP_LAST, }; @@ -321,6 +324,14 @@ extern int radeon_postcleanup( struct drm_device *dev ); extern long radeon_compat_ioctl(struct file *filp, unsigned int cmd, unsigned long arg); + +/* r300_cmdbuf.c */ +extern void r300_init_reg_flags(void); + +extern int r300_do_cp_cmdbuf(drm_device_t* dev, DRMFILE filp, + drm_file_t* filp_priv, + drm_radeon_cmd_buffer_t* cmdbuf); + /* Flags for stats.boxes */ #define RADEON_BOX_DMA_IDLE 0x1 @@ -358,6 +369,11 @@ extern long radeon_compat_ioctl(struct file *filp, unsigned int cmd, #define RADEON_CRTC2_OFFSET 0x0324 #define RADEON_CRTC2_OFFSET_CNTL 0x0328 +#define RADEON_MPP_TB_CONFIG 0x01c0 +#define RADEON_MEM_CNTL 0x0140 +#define RADEON_MEM_SDRAM_MODE_REG 0x0158 +#define RADEON_AGP_BASE 0x0170 + #define RADEON_RB3D_COLOROFFSET 0x1c40 #define RADEON_RB3D_COLORPITCH 0x1c48 @@ -652,16 +668,27 @@ extern long radeon_compat_ioctl(struct file *filp, unsigned int cmd, #define RADEON_CP_PACKET1 0x40000000 #define RADEON_CP_PACKET2 0x80000000 #define RADEON_CP_PACKET3 0xC0000000 +# define RADEON_CP_NOP 0x00001000 +# define RADEON_CP_NEXT_CHAR 0x00001900 +# define RADEON_CP_PLY_NEXTSCAN 0x00001D00 +# define RADEON_CP_SET_SCISSORS 0x00001E00 + /* GEN_INDX_PRIM is unsupported starting with R300 */ # define RADEON_3D_RNDR_GEN_INDX_PRIM 0x00002300 # define RADEON_WAIT_FOR_IDLE 0x00002600 # define RADEON_3D_DRAW_VBUF 0x00002800 # define RADEON_3D_DRAW_IMMD 0x00002900 # define RADEON_3D_DRAW_INDX 0x00002A00 +# define RADEON_CP_LOAD_PALETTE 0x00002C00 # define RADEON_3D_LOAD_VBPNTR 0x00002F00 # define RADEON_MPEG_IDCT_MACROBLOCK 0x00003000 # define RADEON_MPEG_IDCT_MACROBLOCK_REV 0x00003100 # define RADEON_3D_CLEAR_ZMASK 0x00003200 +# define RADEON_CP_INDX_BUFFER 0x00003300 +# define RADEON_CP_3D_DRAW_VBUF_2 0x00003400 +# define RADEON_CP_3D_DRAW_IMMD_2 0x00003500 +# define RADEON_CP_3D_DRAW_INDX_2 0x00003600 # define RADEON_3D_CLEAR_HIZ 0x00003700 +# define RADEON_CP_3D_CLEAR_CMASK 0x00003802 # define RADEON_CNTL_HOSTDATA_BLT 0x00009400 # define RADEON_CNTL_PAINT_MULTI 0x00009A00 # define RADEON_CNTL_BITBLT_MULTI 0x00009B00 diff --git a/drivers/char/drm/radeon_state.c b/drivers/char/drm/radeon_state.c index 1f79e249146..d57accdd8df 100644 --- a/drivers/char/drm/radeon_state.c +++ b/drivers/char/drm/radeon_state.c @@ -2797,6 +2797,17 @@ static int radeon_cp_cmdbuf( DRM_IOCTL_ARGS ) orig_nbox = cmdbuf.nbox; + if(dev_priv->microcode_version == UCODE_R300) { + int temp; + temp=r300_do_cp_cmdbuf(dev, filp, filp_priv, &cmdbuf); + + if (orig_bufsz != 0) + drm_free(kbuf, orig_bufsz, DRM_MEM_DRIVER); + + return temp; + } + + /* microcode_version != r300 */ while ( cmdbuf.bufsz >= sizeof(header) ) { header.i = *(int *)cmdbuf.buf; -- cgit v1.2.3 From c8b432dc0c8d635254010513ca1a3a10a77037a1 Mon Sep 17 00:00:00 2001 From: Dave Airlie Date: Tue, 16 Aug 2005 20:54:18 +1000 Subject: drm: update pci ids for savage and via Fixup savage and via pci ids From: Dave Airlie --- drivers/char/drm/drm_pciids.h | 55 ++++++++++++++++++++----------------------- 1 file changed, 25 insertions(+), 30 deletions(-) diff --git a/drivers/char/drm/drm_pciids.h b/drivers/char/drm/drm_pciids.h index 1874c1fd171..58b1747cd44 100644 --- a/drivers/char/drm/drm_pciids.h +++ b/drivers/char/drm/drm_pciids.h @@ -176,9 +176,10 @@ #define viadrv_PCI_IDS \ {0x1106, 0x3022, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, \ + {0x1106, 0x3118, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, \ {0x1106, 0x3122, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, \ {0x1106, 0x7205, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, \ - {0x1106, 0x7204, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, \ + {0x1106, 0x3108, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, \ {0, 0, 0} #define i810_PCI_IDS \ @@ -196,28 +197,29 @@ {0, 0, 0} #define savage_PCI_IDS \ - {0x5333, 0x8a22, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, \ - {0x5333, 0x8a23, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, \ - {0x5333, 0x8c10, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, \ - {0x5333, 0x8c11, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, \ - {0x5333, 0x8c12, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, \ - {0x5333, 0x8c13, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, \ - {0x5333, 0x8c20, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, \ - {0x5333, 0x8c21, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, \ - {0x5333, 0x8c22, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, \ - {0x5333, 0x8c24, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, \ - {0x5333, 0x8c26, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, \ - {0x5333, 0x8c2a, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, \ - {0x5333, 0x8c2b, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, \ - {0x5333, 0x8c2c, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, \ - {0x5333, 0x8c2d, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, \ - {0x5333, 0x8c2e, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, \ - {0x5333, 0x8c2f, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, \ - {0x5333, 0x8a25, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, \ - {0x5333, 0x8a26, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, \ - {0x5333, 0x8d01, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, \ - {0x5333, 0x8d02, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, \ - {0x5333, 0x8d04, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, \ + {0x5333, 0x8a20, PCI_ANY_ID, PCI_ANY_ID, 0, 0, S3_SAVAGE3D}, \ + {0x5333, 0x8a21, PCI_ANY_ID, PCI_ANY_ID, 0, 0, S3_SAVAGE3D}, \ + {0x5333, 0x8a22, PCI_ANY_ID, PCI_ANY_ID, 0, 0, S3_SAVAGE4}, \ + {0x5333, 0x8a23, PCI_ANY_ID, PCI_ANY_ID, 0, 0, S3_SAVAGE4}, \ + {0x5333, 0x8c10, PCI_ANY_ID, PCI_ANY_ID, 0, 0, S3_SAVAGE_MX}, \ + {0x5333, 0x8c11, PCI_ANY_ID, PCI_ANY_ID, 0, 0, S3_SAVAGE_MX}, \ + {0x5333, 0x8c12, PCI_ANY_ID, PCI_ANY_ID, 0, 0, S3_SAVAGE_MX}, \ + {0x5333, 0x8c13, PCI_ANY_ID, PCI_ANY_ID, 0, 0, S3_SAVAGE_MX}, \ + {0x5333, 0x8c22, PCI_ANY_ID, PCI_ANY_ID, 0, 0, S3_SUPERSAVAGE}, \ + {0x5333, 0x8c24, PCI_ANY_ID, PCI_ANY_ID, 0, 0, S3_SUPERSAVAGE}, \ + {0x5333, 0x8c26, PCI_ANY_ID, PCI_ANY_ID, 0, 0, S3_SUPERSAVAGE}, \ + {0x5333, 0x8c2a, PCI_ANY_ID, PCI_ANY_ID, 0, 0, S3_SUPERSAVAGE}, \ + {0x5333, 0x8c2b, PCI_ANY_ID, PCI_ANY_ID, 0, 0, S3_SUPERSAVAGE}, \ + {0x5333, 0x8c2c, PCI_ANY_ID, PCI_ANY_ID, 0, 0, S3_SUPERSAVAGE}, \ + {0x5333, 0x8c2d, PCI_ANY_ID, PCI_ANY_ID, 0, 0, S3_SUPERSAVAGE}, \ + {0x5333, 0x8c2e, PCI_ANY_ID, PCI_ANY_ID, 0, 0, S3_SUPERSAVAGE}, \ + {0x5333, 0x8c2f, PCI_ANY_ID, PCI_ANY_ID, 0, 0, S3_SUPERSAVAGE}, \ + {0x5333, 0x8a25, PCI_ANY_ID, PCI_ANY_ID, 0, 0, S3_PROSAVAGE}, \ + {0x5333, 0x8a26, PCI_ANY_ID, PCI_ANY_ID, 0, 0, S3_PROSAVAGE}, \ + {0x5333, 0x8d01, PCI_ANY_ID, PCI_ANY_ID, 0, 0, S3_TWISTER}, \ + {0x5333, 0x8d02, PCI_ANY_ID, PCI_ANY_ID, 0, 0, S3_TWISTER}, \ + {0x5333, 0x8d03, PCI_ANY_ID, PCI_ANY_ID, 0, 0, S3_PROSAVAGEDDR}, \ + {0x5333, 0x8d04, PCI_ANY_ID, PCI_ANY_ID, 0, 0, S3_PROSAVAGEDDR}, \ {0, 0, 0} #define ffb_PCI_IDS \ @@ -233,10 +235,3 @@ {0x8086, 0x2772, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, \ {0, 0, 0} -#define viadrv_PCI_IDS \ - {0x1106, 0x3022, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, \ - {0x1106, 0x3122, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, \ - {0x1106, 0x7205, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, \ - {0x1106, 0x7204, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, \ - {0, 0, 0} - -- cgit v1.2.3 From 686762c8049457a6255ad5caf9275c100fbaceb6 Mon Sep 17 00:00:00 2001 From: Dave Kleikamp Date: Wed, 17 Aug 2005 13:53:13 -0500 Subject: JFS: Initialize dentry->d_op for negative dentries too Signed-off-by: Dave Kleikamp --- fs/jfs/namei.c | 5 ++--- 1 file changed, 2 insertions(+), 3 deletions(-) diff --git a/fs/jfs/namei.c b/fs/jfs/namei.c index 1cae14e741e..49ccde3937f 100644 --- a/fs/jfs/namei.c +++ b/fs/jfs/namei.c @@ -1390,6 +1390,8 @@ static struct dentry *jfs_lookup(struct inode *dip, struct dentry *dentry, struc jfs_info("jfs_lookup: name = %s", name); + if (JFS_SBI(dip->i_sb)->mntflag & JFS_OS2) + dentry->d_op = &jfs_ci_dentry_operations; if ((name[0] == '.') && (len == 1)) inum = dip->i_ino; @@ -1417,9 +1419,6 @@ static struct dentry *jfs_lookup(struct inode *dip, struct dentry *dentry, struc return ERR_PTR(-EACCES); } - if (JFS_SBI(dip->i_sb)->mntflag & JFS_OS2) - dentry->d_op = &jfs_ci_dentry_operations; - dentry = d_splice_alias(ip, dentry); if (dentry && (JFS_SBI(dip->i_sb)->mntflag & JFS_OS2)) -- cgit v1.2.3 From e9985d53e3da3b51d0334d0622c449fda78ae089 Mon Sep 17 00:00:00 2001 From: Adrian Bunk Date: Tue, 9 Aug 2005 02:41:00 +0200 Subject: [PATCH] SIS190 must select MII SIS190 must select MII since it's using it. While I was editing the Kconfig entry, I also converted the spaces to tabs. Signed-off-by: Adrian Bunk Signed-off-by: Jeff Garzik --- drivers/net/Kconfig | 17 +++++++++-------- 1 file changed, 9 insertions(+), 8 deletions(-) diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig index 765fbb29d38..26e4aa93afd 100644 --- a/drivers/net/Kconfig +++ b/drivers/net/Kconfig @@ -1922,14 +1922,15 @@ config R8169_VLAN If in doubt, say Y. config SIS190 - tristate "SiS190 gigabit ethernet support" - depends on PCI - select CRC32 - ---help--- - Say Y here if you have a SiS 190 PCI Gigabit Ethernet adapter. - - To compile this driver as a module, choose M here: the module - will be called sis190. This is recommended. + tristate "SiS190 gigabit ethernet support" + depends on PCI + select CRC32 + select MII + ---help--- + Say Y here if you have a SiS 190 PCI Gigabit Ethernet adapter. + + To compile this driver as a module, choose M here: the module + will be called sis190. This is recommended. config SKGE tristate "New SysKonnect GigaEthernet support (EXPERIMENTAL)" -- cgit v1.2.3 From 945a787675cc5ba362f5d4ce135d2a2c20be5985 Mon Sep 17 00:00:00 2001 From: Peer Chen Date: Sat, 20 Aug 2005 01:10:06 -0400 Subject: [netdrvr uli526x] fix problems found in review - s/DEVICE/net_device/ - improve formatting - remove dead code - check return value, in several areas --- drivers/net/tulip/uli526x.c | 207 ++++++++++++++++++++------------------------ 1 file changed, 93 insertions(+), 114 deletions(-) diff --git a/drivers/net/tulip/uli526x.c b/drivers/net/tulip/uli526x.c index 27f99e087f7..5ae22b7bc5c 100644 --- a/drivers/net/tulip/uli526x.c +++ b/drivers/net/tulip/uli526x.c @@ -56,8 +56,7 @@ #define RX_ALLOC_SIZE 0x620 #define ULI526X_RESET 1 #define CR0_DEFAULT 0 -#define CR6_DEFAULT 0x00080000 /* HD */ -#define CR6_DEFAULT_A 0x22240000 +#define CR6_DEFAULT 0x22200000 #define CR7_DEFAULT 0x180c1 #define CR15_DEFAULT 0x06 /* TxJabber RxWatchdog */ #define TDES0_ERR_MASK 0x4302 /* TXJT, LC, EC, FUE */ @@ -103,10 +102,13 @@ #define SROM_V41_CODE 0x14 -#define SROM_CLK_WRITE(data, ioaddr) outl(data|CR9_SROM_READ|CR9_SRCS,ioaddr);udelay(5);outl(data|CR9_SROM_READ|CR9_SRCS|CR9_SRCLK,ioaddr);udelay(5);outl(data|CR9_SROM_READ|CR9_SRCS,ioaddr);udelay(5); - -/* Sten Check */ -#define DEVICE net_device +#define SROM_CLK_WRITE(data, ioaddr) \ + outl(data|CR9_SROM_READ|CR9_SRCS,ioaddr); \ + udelay(5); \ + outl(data|CR9_SROM_READ|CR9_SRCS|CR9_SRCLK,ioaddr); \ + udelay(5); \ + outl(data|CR9_SROM_READ|CR9_SRCS,ioaddr); \ + udelay(5); /* Structure/enum declaration ------------------------------- */ struct tx_desc { @@ -123,7 +125,7 @@ struct rx_desc { struct uli526x_board_info { u32 chip_id; /* Chip vendor/Device ID */ - struct DEVICE *next_dev; /* next device */ + struct net_device *next_dev; /* next device */ struct pci_dev *pdev; /* PCI device */ spinlock_t lock; @@ -212,22 +214,21 @@ static u32 uli526x_cr6_user_set; /* For module input parameter */ static int debug; static u32 cr6set; -static u32 m526x_id; static unsigned char mode = 8; /* function declaration ------------------------------------- */ -static int uli526x_open(struct DEVICE *); -static int uli526x_start_xmit(struct sk_buff *, struct DEVICE *); -static int uli526x_stop(struct DEVICE *); -static struct net_device_stats * uli526x_get_stats(struct DEVICE *); -static void uli526x_set_filter_mode(struct DEVICE *); +static int uli526x_open(struct net_device *); +static int uli526x_start_xmit(struct sk_buff *, struct net_device *); +static int uli526x_stop(struct net_device *); +static struct net_device_stats * uli526x_get_stats(struct net_device *); +static void uli526x_set_filter_mode(struct net_device *); static struct ethtool_ops netdev_ethtool_ops; -static u16 read_srom_word(long ,int); -static irqreturn_t uli526x_interrupt(int , void *, struct pt_regs *); +static u16 read_srom_word(long, int); +static irqreturn_t uli526x_interrupt(int, void *, struct pt_regs *); static void uli526x_descriptor_init(struct uli526x_board_info *, unsigned long); static void allocate_rx_buffer(struct uli526x_board_info *); static void update_cr6(u32, unsigned long); -static void send_filter_frame(struct DEVICE * ,int); +static void send_filter_frame(struct net_device *, int); static u16 phy_read(unsigned long, u8, u8, u32); static u16 phy_readby_cr10(unsigned long, u8, u8); static void phy_write(unsigned long, u8, u8, u16, u32); @@ -237,18 +238,18 @@ static u16 phy_read_1bit(unsigned long, u32); static u8 uli526x_sense_speed(struct uli526x_board_info *); static void uli526x_process_mode(struct uli526x_board_info *); static void uli526x_timer(unsigned long); -static void uli526x_rx_packet(struct DEVICE *, struct uli526x_board_info *); -static void uli526x_free_tx_pkt(struct DEVICE *, struct uli526x_board_info *); +static void uli526x_rx_packet(struct net_device *, struct uli526x_board_info *); +static void uli526x_free_tx_pkt(struct net_device *, struct uli526x_board_info *); static void uli526x_reuse_skb(struct uli526x_board_info *, struct sk_buff *); -static void uli526x_dynamic_reset(struct DEVICE *); +static void uli526x_dynamic_reset(struct net_device *); static void uli526x_free_rxbuffer(struct uli526x_board_info *); -static void uli526x_init(struct DEVICE *); +static void uli526x_init(struct net_device *); static void uli526x_set_phyxcer(struct uli526x_board_info *); -/* ULI526X network baord routine ---------------------------- */ +/* ULI526X network board routine ---------------------------- */ /* - * Search ULI526X board ,allocate space and register it + * Search ULI526X board, allocate space and register it */ static int __devinit uli526x_init_one (struct pci_dev *pdev, @@ -257,8 +258,7 @@ static int __devinit uli526x_init_one (struct pci_dev *pdev, struct uli526x_board_info *db; /* board information structure */ struct net_device *dev; int i, err; - u32 configval; - + ULI526X_DBUG(0, "uli526x_init_one()", 0); if (!printed_version++) @@ -271,7 +271,7 @@ static int __devinit uli526x_init_one (struct pci_dev *pdev, SET_MODULE_OWNER(dev); SET_NETDEV_DEV(dev, &pdev->dev); - if (pci_set_dma_mask(pdev, 0xffffffff)) { + if (pci_set_dma_mask(pdev, DMA_32BIT_MASK)) { printk(KERN_WARNING DRV_NAME ": 32-bit PCI DMA not available.\n"); err = -ENODEV; goto err_out_free; @@ -300,23 +300,23 @@ static int __devinit uli526x_init_one (struct pci_dev *pdev, goto err_out_disable; } - //add by clearzhang 2004/7/8 - pci_read_config_dword(pdev,0x0,&configval); - m526x_id = configval; - if(configval == 0x526310b9) - { - //printk("is m5263\n"); - pci_read_config_dword(pdev,0x0c,&configval); - configval = ((configval & 0xffff00ff) | 0x8000); - pci_write_config_dword(pdev,0x0c,configval); - } /* Init system & device */ db = netdev_priv(dev); /* Allocate Tx/Rx descriptor memory */ db->desc_pool_ptr = pci_alloc_consistent(pdev, sizeof(struct tx_desc) * DESC_ALL_CNT + 0x20, &db->desc_pool_dma_ptr); + if(db->desc_pool_ptr == NULL) + { + err = -ENOMEM; + goto err_out_nomem; + } db->buf_pool_ptr = pci_alloc_consistent(pdev, TX_BUF_ALLOC * TX_DESC_CNT + 4, &db->buf_pool_dma_ptr); - + if(db->buf_pool_ptr == NULL) + { + err = -ENOMEM; + goto err_out_nomem; + } + db->first_tx_desc = (struct tx_desc *) db->desc_pool_ptr; db->first_tx_desc_dma = db->desc_pool_dma_ptr; db->buf_pool_start = db->buf_pool_ptr; @@ -347,7 +347,7 @@ static int __devinit uli526x_init_one (struct pci_dev *pdev, ((u16 *) db->srom)[i] = cpu_to_le16(read_srom_word(db->ioaddr, i)); /* Set Node address */ - if(((u16 *) db->srom)[0] == 0xffff) /* SROM absent, so read MAC address from ID Table */ + if(((u16 *) db->srom)[0] == 0xffff || ((u16 *) db->srom)[0] == 0) /* SROM absent, so read MAC address from ID Table */ { outl(0x10000, db->ioaddr + DCR0); //Diagnosis mode outl(0x1c0, db->ioaddr + DCR13); //Reset dianostic pointer port @@ -385,6 +385,14 @@ static int __devinit uli526x_init_one (struct pci_dev *pdev, err_out_res: pci_release_regions(pdev); +err_out_nomem: + if(db->desc_pool_ptr) + pci_free_consistent(pdev, sizeof(struct tx_desc) * DESC_ALL_CNT + 0x20, + db->desc_pool_ptr, db->desc_pool_dma_ptr); + + if(db->buf_pool_ptr != NULL) + pci_free_consistent(pdev, TX_BUF_ALLOC * TX_DESC_CNT + 4, + db->buf_pool_ptr, db->buf_pool_dma_ptr); err_out_disable: pci_disable_device(pdev); err_out_free: @@ -402,32 +410,30 @@ static void __devexit uli526x_remove_one (struct pci_dev *pdev) ULI526X_DBUG(0, "uli526x_remove_one()", 0); - if (dev) { - pci_free_consistent(db->pdev, sizeof(struct tx_desc) * - DESC_ALL_CNT + 0x20, db->desc_pool_ptr, - db->desc_pool_dma_ptr); - pci_free_consistent(db->pdev, TX_BUF_ALLOC * TX_DESC_CNT + 4, - db->buf_pool_ptr, db->buf_pool_dma_ptr); - unregister_netdev(dev); - pci_release_regions(pdev); - free_netdev(dev); /* free board information */ - pci_set_drvdata(pdev, NULL); - } - + pci_free_consistent(db->pdev, sizeof(struct tx_desc) * + DESC_ALL_CNT + 0x20, db->desc_pool_ptr, + db->desc_pool_dma_ptr); + pci_free_consistent(db->pdev, TX_BUF_ALLOC * TX_DESC_CNT + 4, + db->buf_pool_ptr, db->buf_pool_dma_ptr); + unregister_netdev(dev); + pci_release_regions(pdev); + free_netdev(dev); /* free board information */ + pci_set_drvdata(pdev, NULL); + pci_disable_device(pdev); ULI526X_DBUG(0, "uli526x_remove_one() exit", 0); } /* * Open the interface. - * The interface is opened whenever "ifconfig" actives it. + * The interface is opened whenever "ifconfig" activates it. */ -static int uli526x_open(struct DEVICE *dev) +static int uli526x_open(struct net_device *dev) { int ret; struct uli526x_board_info *db = netdev_priv(dev); - + ULI526X_DBUG(0, "uli526x_open", 0); ret = request_irq(dev->irq, &uli526x_interrupt, SA_SHIRQ, dev->name, dev); @@ -436,11 +442,6 @@ static int uli526x_open(struct DEVICE *dev) /* system variable init */ db->cr6_data = CR6_DEFAULT | uli526x_cr6_user_set; - if(m526x_id == 0x526310b9) - { - //printk("is 5263\n"); - db->cr6_data = CR6_DEFAULT_A | uli526x_cr6_user_set; - } db->tx_packet_cnt = 0; db->rx_avail_cnt = 0; db->link_failed = 1; @@ -454,7 +455,7 @@ static int uli526x_open(struct DEVICE *dev) db->cr6_data |= ULI526X_TXTH_256; db->cr0_data = CR0_DEFAULT; - /* Initilize ULI526X board */ + /* Initialize ULI526X board */ uli526x_init(dev); /* Active System Interface */ @@ -471,14 +472,14 @@ static int uli526x_open(struct DEVICE *dev) } -/* Initilize ULI526X board +/* Initialize ULI526X board * Reset ULI526X board - * Initilize TX/Rx descriptor chain structure + * Initialize TX/Rx descriptor chain structure * Send the set-up frame * Enable Tx/Rx machine */ -static void uli526x_init(struct DEVICE *dev) +static void uli526x_init(struct net_device *dev) { struct uli526x_board_info *db = netdev_priv(dev); unsigned long ioaddr = db->ioaddr; @@ -510,11 +511,6 @@ static void uli526x_init(struct DEVICE *dev) /* Parser SROM and media mode */ db->media_mode = uli526x_media_mode; - //add by clearzhang 2004/7/8 - /* RESET Phyxcer Chip by GPR port bit 7 */ - //outl(0x180, ioaddr + DCR12); /* Let bit 7 output port */ - //outl(0x0, ioaddr + DCR12); /* Clear RESET signal */ - /* Phyxcer capability setting */ phy_reg_reset = phy_read(db->ioaddr, db->phy_addr, 0, db->chip_id); phy_reg_reset = (phy_reg_reset | 0x8000); @@ -528,7 +524,7 @@ static void uli526x_init(struct DEVICE *dev) if ( !(db->media_mode & ULI526X_AUTO) ) db->op_mode = db->media_mode; /* Force Mode */ - /* Initiliaze Transmit/Receive decriptor and CR3/4 */ + /* Initialize Transmit/Receive decriptor and CR3/4 */ uli526x_descriptor_init(db, ioaddr); /* Init CR6 to program M526X operation */ @@ -555,7 +551,7 @@ static void uli526x_init(struct DEVICE *dev) * Send a packet to media from the upper layer. */ -static int uli526x_start_xmit(struct sk_buff *skb, struct DEVICE *dev) +static int uli526x_start_xmit(struct sk_buff *skb, struct net_device *dev) { struct uli526x_board_info *db = netdev_priv(dev); struct tx_desc *txptr; @@ -621,7 +617,7 @@ static int uli526x_start_xmit(struct sk_buff *skb, struct DEVICE *dev) * The interface is stopped when it is brought. */ -static int uli526x_stop(struct DEVICE *dev) +static int uli526x_stop(struct net_device *dev) { struct uli526x_board_info *db = netdev_priv(dev); unsigned long ioaddr = dev->base_addr; @@ -665,19 +661,16 @@ static int uli526x_stop(struct DEVICE *dev) static irqreturn_t uli526x_interrupt(int irq, void *dev_id, struct pt_regs *regs) { - struct DEVICE *dev = dev_id; + struct net_device *dev = dev_id; struct uli526x_board_info *db = netdev_priv(dev); unsigned long ioaddr = dev->base_addr; unsigned long flags; - //ULI526X_DBUG(0, "uli526x_interrupt()", 0); - if (!dev) { ULI526X_DBUG(1, "uli526x_interrupt() without DEVICE arg", 0); return IRQ_NONE; } - //outl(0, ioaddr + DCR7); spin_lock_irqsave(&db->lock, flags); outl(0, ioaddr + DCR7); @@ -690,9 +683,6 @@ static irqreturn_t uli526x_interrupt(int irq, void *dev_id, struct pt_regs *regs return IRQ_HANDLED; } - /* Disable all interrupt in CR7 to solve the interrupt edge problem */ - //outl(0, ioaddr + DCR7); - /* Check system status */ if (db->cr5_data & 0x2000) { /* system bus error happen */ @@ -727,10 +717,9 @@ static irqreturn_t uli526x_interrupt(int irq, void *dev_id, struct pt_regs *regs * Free TX resource after TX complete */ -static void uli526x_free_tx_pkt(struct DEVICE *dev, struct uli526x_board_info * db) +static void uli526x_free_tx_pkt(struct net_device *dev, struct uli526x_board_info * db) { struct tx_desc *txptr; -// unsigned long ioaddr = dev->base_addr; u32 tdes0; txptr = db->tx_remove_ptr; @@ -787,7 +776,7 @@ static void uli526x_free_tx_pkt(struct DEVICE *dev, struct uli526x_board_info * * Receive the come packet and pass to upper layer */ -static void uli526x_rx_packet(struct DEVICE *dev, struct uli526x_board_info * db) +static void uli526x_rx_packet(struct net_device *dev, struct uli526x_board_info * db) { struct rx_desc *rxptr; struct sk_buff *skb; @@ -871,7 +860,7 @@ static void uli526x_rx_packet(struct DEVICE *dev, struct uli526x_board_info * db * Get statistics from driver. */ -static struct net_device_stats * uli526x_get_stats(struct DEVICE *dev) +static struct net_device_stats * uli526x_get_stats(struct net_device *dev) { struct uli526x_board_info *db = netdev_priv(dev); @@ -884,7 +873,7 @@ static struct net_device_stats * uli526x_get_stats(struct DEVICE *dev) * Set ULI526X multicast address */ -static void uli526x_set_filter_mode(struct DEVICE * dev) +static void uli526x_set_filter_mode(struct net_device * dev) { struct uli526x_board_info *db = dev->priv; unsigned long flags; @@ -916,34 +905,26 @@ static void uli526x_set_filter_mode(struct DEVICE * dev) static void ULi_ethtool_gset(struct uli526x_board_info *db, struct ethtool_cmd *ecmd) { - //struct e1000_hw *hw = &adapter->hw; - - { - - ecmd->supported = (SUPPORTED_10baseT_Half | - SUPPORTED_10baseT_Full | - SUPPORTED_100baseT_Half | - SUPPORTED_100baseT_Full | - SUPPORTED_Autoneg | - SUPPORTED_MII); + ecmd->supported = (SUPPORTED_10baseT_Half | + SUPPORTED_10baseT_Full | + SUPPORTED_100baseT_Half | + SUPPORTED_100baseT_Full | + SUPPORTED_Autoneg | + SUPPORTED_MII); - ecmd->advertising = (ADVERTISED_10baseT_Half | - ADVERTISED_10baseT_Full | - ADVERTISED_100baseT_Half | - ADVERTISED_100baseT_Full | - ADVERTISED_Autoneg | - ADVERTISED_MII); + ecmd->advertising = (ADVERTISED_10baseT_Half | + ADVERTISED_10baseT_Full | + ADVERTISED_100baseT_Half | + ADVERTISED_100baseT_Full | + ADVERTISED_Autoneg | + ADVERTISED_MII); - ecmd->port = PORT_MII; - ecmd->phy_address = db->phy_addr; + ecmd->port = PORT_MII; + ecmd->phy_address = db->phy_addr; - ecmd->transceiver = XCVR_EXTERNAL; + ecmd->transceiver = XCVR_EXTERNAL; - - } - - ecmd->speed = 10; ecmd->duplex = DUPLEX_HALF; @@ -965,8 +946,6 @@ ULi_ethtool_gset(struct uli526x_board_info *db, struct ethtool_cmd *ecmd) { ecmd->autoneg = AUTONEG_ENABLE; } - - } static void netdev_get_drvinfo(struct net_device *dev, @@ -1022,7 +1001,7 @@ static void uli526x_timer(unsigned long data) { u32 tmp_cr8; unsigned char tmp_cr12=0; - struct DEVICE *dev = (struct DEVICE *) data; + struct net_device *dev = (struct net_device *) data; struct uli526x_board_info *db = netdev_priv(dev); unsigned long flags; u8 TmpSpeed=10; @@ -1135,10 +1114,10 @@ static void uli526x_timer(unsigned long data) * Stop ULI526X board * Free Tx/Rx allocated memory * Reset ULI526X board - * Re-initilize ULI526X board + * Re-initialize ULI526X board */ -static void uli526x_dynamic_reset(struct DEVICE *dev) +static void uli526x_dynamic_reset(struct net_device *dev) { struct uli526x_board_info *db = netdev_priv(dev); @@ -1163,7 +1142,7 @@ static void uli526x_dynamic_reset(struct DEVICE *dev) db->init=1; db->wait_reset = 0; - /* Re-initilize ULI526X board */ + /* Re-initialize ULI526X board */ uli526x_init(dev); /* Restart upper layer interface */ @@ -1273,7 +1252,7 @@ static void uli526x_descriptor_init(struct uli526x_board_info *db, unsigned long /* * Update CR6 value - * Firstly stop ULI526X , then written value and start + * Firstly stop ULI526X, then written value and start */ static void update_cr6(u32 cr6_data, unsigned long ioaddr) @@ -1286,10 +1265,10 @@ static void update_cr6(u32 cr6_data, unsigned long ioaddr) /* * Send a setup frame for M5261/M5263 - * This setup frame initilize ULI526X address filter mode + * This setup frame initialize ULI526X address filter mode */ -static void send_filter_frame(struct DEVICE *dev, int mc_cnt) +static void send_filter_frame(struct net_device *dev, int mc_cnt) { struct uli526x_board_info *db = netdev_priv(dev); struct dev_mc_list *mcptr; @@ -1718,7 +1697,7 @@ MODULE_PARM_DESC(mode, "ULi M5261/M5263: Bit 0: 10/100Mbps, bit 2: duplex, bit 8 /* Description: * when user used insmod to add module, system invoked init_module() - * to initilize and register. + * to register the services. */ static int __init uli526x_init_module(void) -- cgit v1.2.3 From ffbbf7a3ccdcac7526296a55968e5dac0626fd9e Mon Sep 17 00:00:00 2001 From: Dave Airlie Date: Sat, 20 Aug 2005 17:40:04 +1000 Subject: drm: add new texture upload code from r300 project Paul Mackerras did some new upload code for r300, I forgot to add it to the kernel with r300 merge. Signed-off-by: Dave Airlie --- drivers/char/drm/radeon_state.c | 64 +++++++++++++++++++---------------------- 1 file changed, 29 insertions(+), 35 deletions(-) diff --git a/drivers/char/drm/radeon_state.c b/drivers/char/drm/radeon_state.c index d57accdd8df..64a3e3a406e 100644 --- a/drivers/char/drm/radeon_state.c +++ b/drivers/char/drm/radeon_state.c @@ -1493,7 +1493,7 @@ static void radeon_cp_dispatch_indices( drm_device_t *dev, } -#define RADEON_MAX_TEXTURE_SIZE (RADEON_BUFFER_SIZE - 8 * sizeof(u32)) +#define RADEON_MAX_TEXTURE_SIZE RADEON_BUFFER_SIZE static int radeon_cp_dispatch_texture( DRMFILE filp, drm_device_t *dev, @@ -1506,10 +1506,11 @@ static int radeon_cp_dispatch_texture( DRMFILE filp, u32 format; u32 *buffer; const u8 __user *data; - int size, dwords, tex_width, blit_width; + int size, dwords, tex_width, blit_width, spitch; u32 height; int i; u32 texpitch, microtile; + u32 offset; RING_LOCALS; DRM_GET_PRIV_WITH_RETURN( filp_priv, filp ); @@ -1530,17 +1531,6 @@ static int radeon_cp_dispatch_texture( DRMFILE filp, RADEON_WAIT_UNTIL_IDLE(); ADVANCE_RING(); -#ifdef __BIG_ENDIAN - /* The Mesa texture functions provide the data in little endian as the - * chip wants it, but we need to compensate for the fact that the CP - * ring gets byte-swapped - */ - BEGIN_RING( 2 ); - OUT_RING_REG( RADEON_RBBM_GUICNTL, RADEON_HOST_DATA_SWAP_32BIT ); - ADVANCE_RING(); -#endif - - /* The compiler won't optimize away a division by a variable, * even if the only legal values are powers of two. Thus, we'll * use a shift instead. @@ -1572,6 +1562,10 @@ static int radeon_cp_dispatch_texture( DRMFILE filp, DRM_ERROR( "invalid texture format %d\n", tex->format ); return DRM_ERR(EINVAL); } + spitch = blit_width >> 6; + if (spitch == 0 && image->height > 1) + return DRM_ERR(EINVAL); + texpitch = tex->pitch; if ((texpitch << 22) & RADEON_DST_TILE_MICRO) { microtile = 1; @@ -1624,25 +1618,6 @@ static int radeon_cp_dispatch_texture( DRMFILE filp, */ buffer = (u32*)((char*)dev->agp_buffer_map->handle + buf->offset); dwords = size / 4; - buffer[0] = CP_PACKET3( RADEON_CNTL_HOSTDATA_BLT, dwords + 6 ); - buffer[1] = (RADEON_GMC_DST_PITCH_OFFSET_CNTL | - RADEON_GMC_BRUSH_NONE | - (format << 8) | - RADEON_GMC_SRC_DATATYPE_COLOR | - RADEON_ROP3_S | - RADEON_DP_SRC_SOURCE_HOST_DATA | - RADEON_GMC_CLR_CMP_CNTL_DIS | - RADEON_GMC_WR_MSK_DIS); - - buffer[2] = (texpitch << 22) | (tex->offset >> 10); - buffer[3] = 0xffffffff; - buffer[4] = 0xffffffff; - buffer[5] = (image->y << 16) | image->x; - buffer[6] = (height << 16) | image->width; - buffer[7] = dwords; - buffer += 8; - - if (microtile) { /* texture micro tiling in use, minimum texture width is thus 16 bytes. @@ -1750,9 +1725,28 @@ static int radeon_cp_dispatch_texture( DRMFILE filp, } buf->filp = filp; - buf->used = (dwords + 8) * sizeof(u32); - radeon_cp_dispatch_indirect( dev, buf, 0, buf->used ); - radeon_cp_discard_buffer( dev, buf ); + buf->used = size; + offset = dev_priv->gart_buffers_offset + buf->offset; + BEGIN_RING(9); + OUT_RING(CP_PACKET3(RADEON_CNTL_BITBLT_MULTI, 5)); + OUT_RING(RADEON_GMC_SRC_PITCH_OFFSET_CNTL | + RADEON_GMC_DST_PITCH_OFFSET_CNTL | + RADEON_GMC_BRUSH_NONE | + (format << 8) | + RADEON_GMC_SRC_DATATYPE_COLOR | + RADEON_ROP3_S | + RADEON_DP_SRC_SOURCE_MEMORY | + RADEON_GMC_CLR_CMP_CNTL_DIS | + RADEON_GMC_WR_MSK_DIS ); + OUT_RING((spitch << 22) | (offset >> 10)); + OUT_RING((texpitch << 22) | (tex->offset >> 10)); + OUT_RING(0); + OUT_RING((image->x << 16) | image->y); + OUT_RING((image->width << 16) | height); + RADEON_WAIT_UNTIL_2D_IDLE(); + ADVANCE_RING(); + + radeon_cp_discard_buffer(dev, buf); /* Update the input parameters for next time */ image->y += height; -- cgit v1.2.3 From 88f399cd0a5a540db2815eee3002f8f00ef6461e Mon Sep 17 00:00:00 2001 From: Dave Airlie Date: Sat, 20 Aug 2005 17:43:33 +1000 Subject: drm: fixes for powerpc Remove a bogus check on whether an area is memory (we need a better interface) also change pgprot flags for powerpc don't check on x86-64 either From: Paul Mackerras Signed-off-by: Dave Airlie --- drivers/char/drm/drm_bufs.c | 4 ++-- drivers/char/drm/drm_vm.c | 16 ++++++++-------- 2 files changed, 10 insertions(+), 10 deletions(-) diff --git a/drivers/char/drm/drm_bufs.c b/drivers/char/drm/drm_bufs.c index b70802035d9..e0743ebbe4b 100644 --- a/drivers/char/drm/drm_bufs.c +++ b/drivers/char/drm/drm_bufs.c @@ -152,7 +152,7 @@ int drm_addmap(drm_device_t * dev, unsigned int offset, switch ( map->type ) { case _DRM_REGISTERS: case _DRM_FRAME_BUFFER: -#if !defined(__sparc__) && !defined(__alpha__) && !defined(__ia64__) +#if !defined(__sparc__) && !defined(__alpha__) && !defined(__ia64__) && !defined(__powerpc64__) && !defined(__x86_64__) if ( map->offset + map->size < map->offset || map->offset < virt_to_phys(high_memory) ) { drm_free( map, sizeof(*map), DRM_MEM_MAPS ); @@ -309,7 +309,7 @@ int drm_addmap_ioctl(struct inode *inode, struct file *filp, if (put_user(handle, &argp->handle)) return -EFAULT; return 0; - } +} /** diff --git a/drivers/char/drm/drm_vm.c b/drivers/char/drm/drm_vm.c index 292fa7167b2..ced4215e227 100644 --- a/drivers/char/drm/drm_vm.c +++ b/drivers/char/drm/drm_vm.c @@ -578,17 +578,17 @@ int drm_mmap(struct file *filp, struct vm_area_struct *vma) /* fall through to _DRM_FRAME_BUFFER... */ case _DRM_FRAME_BUFFER: case _DRM_REGISTERS: - if (map->offset >= __pa(high_memory)) { #if defined(__i386__) || defined(__x86_64__) - if (boot_cpu_data.x86 > 3 && map->type != _DRM_AGP) { - pgprot_val(vma->vm_page_prot) |= _PAGE_PCD; - pgprot_val(vma->vm_page_prot) &= ~_PAGE_PWT; - } + if (boot_cpu_data.x86 > 3 && map->type != _DRM_AGP) { + pgprot_val(vma->vm_page_prot) |= _PAGE_PCD; + pgprot_val(vma->vm_page_prot) &= ~_PAGE_PWT; + } #elif defined(__powerpc__) - pgprot_val(vma->vm_page_prot) |= _PAGE_NO_CACHE | _PAGE_GUARDED; + pgprot_val(vma->vm_page_prot) |= _PAGE_NO_CACHE; + if (map->type == _DRM_REGISTERS) + pgprot_val(vma->vm_page_prot) |= _PAGE_GUARDED; #endif - vma->vm_flags |= VM_IO; /* not in core dump */ - } + vma->vm_flags |= VM_IO; /* not in core dump */ #if defined(__ia64__) if (efi_range_is_wc(vma->vm_start, vma->vm_end - vma->vm_start)) -- cgit v1.2.3 From 7a9aff3cff807261e476a1719273a4ac5d254ecb Mon Sep 17 00:00:00 2001 From: Dave Airlie Date: Tue, 23 Aug 2005 12:15:43 +1000 Subject: drm: fix a bad VERSION check. I found why my G5 was crashing when using the linux-2.6 version of the DRM + git-drm.patch from 2.6.13-rc6-mm1, but not with the CVS DRM. The reason was that dev->agp->cant_use_aperture wasn't getting set, and the reason for that was that no longer gets included and the #if LINUX_VERSION_CODE < 0x020408 in drm_agpsupport.c was going the wrong way. With this patch (and a few others) a 32-bit server works correctly, as does DRI. From: Paul Mackerras Signed-off-by: Dave Airlie --- drivers/char/drm/drm_agpsupport.c | 5 ----- 1 file changed, 5 deletions(-) diff --git a/drivers/char/drm/drm_agpsupport.c b/drivers/char/drm/drm_agpsupport.c index ffb4acaefe8..8c215adcb4b 100644 --- a/drivers/char/drm/drm_agpsupport.c +++ b/drivers/char/drm/drm_agpsupport.c @@ -426,13 +426,8 @@ drm_agp_head_t *drm_agp_init(drm_device_t *dev) return NULL; } head->memory = NULL; -#if LINUX_VERSION_CODE <= 0x020408 - head->cant_use_aperture = 0; - head->page_mask = ~(0xfff); -#else head->cant_use_aperture = head->agp_info.cant_use_aperture; head->page_mask = head->agp_info.page_mask; -#endif return head; } -- cgit v1.2.3 From 136df52d532af9c19e5cd0e43a54ea4ee2d934fc Mon Sep 17 00:00:00 2001 From: Malli Chilakala Date: Thu, 25 Aug 2005 13:05:41 -0700 Subject: [PATCH] e100: Do not check Rx packet length against mtu Do not check Rx packet length against mtu - patch from Darren Tucker Signed-off-by: Mallikarjuna R Chilakala Signed-off-by: Ganesh Venkatesan Signed-off-by: John Ronciak Signed-off-by: Jeff Garzik --- drivers/net/e100.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/e100.c b/drivers/net/e100.c index d0fa2448761..bff13545792 100644 --- a/drivers/net/e100.c +++ b/drivers/net/e100.c @@ -1539,7 +1539,7 @@ static inline int e100_rx_indicate(struct nic *nic, struct rx *rx, /* Don't indicate if hardware indicates errors */ nic->net_stats.rx_dropped++; dev_kfree_skb_any(skb); - } else if(actual_size > nic->netdev->mtu + VLAN_ETH_HLEN) { + } else if(actual_size > ETH_DATA_LEN + VLAN_ETH_HLEN) { /* Don't indicate oversized frames */ nic->rx_over_length_errors++; nic->net_stats.rx_dropped++; -- cgit v1.2.3 From a074fb860846937a4a46dbbf439cbbb2e2ba960c Mon Sep 17 00:00:00 2001 From: Malli Chilakala Date: Thu, 25 Aug 2005 13:05:57 -0700 Subject: [PATCH] e100: added msleep_interruptible delay added msleep_interruptible delay right before returning from diag_test Signed-off-by: Mallikarjuna R Chilakala Signed-off-by: Ganesh Venkatesan Signed-off-by: John Ronciak Signed-off-by: Jeff Garzik --- drivers/net/e100.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/net/e100.c b/drivers/net/e100.c index bff13545792..b723f4dca11 100644 --- a/drivers/net/e100.c +++ b/drivers/net/e100.c @@ -2108,6 +2108,8 @@ static void e100_diag_test(struct net_device *netdev, } for(i = 0; i < E100_TEST_LEN; i++) test->flags |= data[i] ? ETH_TEST_FL_FAILED : 0; + + msleep_interruptible(4 * 1000); } static int e100_phys_id(struct net_device *netdev, u32 data) -- cgit v1.2.3 From 996ec3533ae15424e339089a8045ca1c998f8a87 Mon Sep 17 00:00:00 2001 From: Malli Chilakala Date: Thu, 25 Aug 2005 13:06:08 -0700 Subject: [PATCH] e100: fixed endian bug in xmit_prepare routine Fixed endian bug associated with cb_i bit in xmit_prepare Signed-off-by: Mallikarjuna R Chilakala Signed-off-by: Ganesh Venkatesan Signed-off-by: John Ronciak Signed-off-by: Jeff Garzik --- drivers/net/e100.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/net/e100.c b/drivers/net/e100.c index b723f4dca11..e0fcac889a5 100644 --- a/drivers/net/e100.c +++ b/drivers/net/e100.c @@ -1307,7 +1307,8 @@ static inline void e100_xmit_prepare(struct nic *nic, struct cb *cb, { cb->command = nic->tx_command; /* interrupt every 16 packets regardless of delay */ - if((nic->cbs_avail & ~15) == nic->cbs_avail) cb->command |= cb_i; + if((nic->cbs_avail & ~15) == nic->cbs_avail) + cb->command |= cpu_to_le16(cb_i); cb->u.tcb.tbd_array = cb->dma_addr + offsetof(struct cb, u.tcb.tbd); cb->u.tcb.tcb_byte_count = 0; cb->u.tcb.threshold = nic->tx_threshold; -- cgit v1.2.3 From e6280f26b43775d8fa0c54e50c92491cfccbf738 Mon Sep 17 00:00:00 2001 From: Malli Chilakala Date: Thu, 25 Aug 2005 13:06:23 -0700 Subject: [PATCH] e100: Increased delay loop for command blocks Increased delay loop for command blocks Signed-off-by: Mallikarjuna R Chilakala Signed-off-by: Ganesh Venkatesan Signed-off-by: John Ronciak Signed-off-by: Jeff Garzik --- drivers/net/e100.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/net/e100.c b/drivers/net/e100.c index e0fcac889a5..09448ec48a7 100644 --- a/drivers/net/e100.c +++ b/drivers/net/e100.c @@ -785,6 +785,7 @@ static int e100_eeprom_save(struct nic *nic, u16 start, u16 count) } #define E100_WAIT_SCB_TIMEOUT 20000 /* we might have to wait 100ms!!! */ +#define E100_WAIT_SCB_FAST 20 /* delay like the old code */ static inline int e100_exec_cmd(struct nic *nic, u8 cmd, dma_addr_t dma_addr) { unsigned long flags; @@ -798,7 +799,7 @@ static inline int e100_exec_cmd(struct nic *nic, u8 cmd, dma_addr_t dma_addr) if(likely(!readb(&nic->csr->scb.cmd_lo))) break; cpu_relax(); - if(unlikely(i > (E100_WAIT_SCB_TIMEOUT >> 1))) + if(unlikely(i > E100_WAIT_SCB_FAST)) udelay(5); } if(unlikely(i == E100_WAIT_SCB_TIMEOUT)) { -- cgit v1.2.3 From 685fac63f5ca6c5ca06bab641e1a32bbf9287e89 Mon Sep 17 00:00:00 2001 From: Malli Chilakala Date: Thu, 25 Aug 2005 13:06:34 -0700 Subject: [PATCH] e100: CPU cycle saver microcode Add cpu cycle saver microcode to 8086:{1209/1229} other than ICH devices. Signed-off-by: Mallikarjuna R Chilakala Signed-off-by: Ganesh Venkatesan Signed-off-by: John Ronciak Signed-off-by: Jeff Garzik --- drivers/net/e100.c | 224 ++++++++++++++++++++++++++++++++++++++++++++++++----- 1 file changed, 206 insertions(+), 18 deletions(-) diff --git a/drivers/net/e100.c b/drivers/net/e100.c index 09448ec48a7..7e303744dd5 100644 --- a/drivers/net/e100.c +++ b/drivers/net/e100.c @@ -903,8 +903,8 @@ static void mdio_write(struct net_device *netdev, int addr, int reg, int data) static void e100_get_defaults(struct nic *nic) { - struct param_range rfds = { .min = 16, .max = 256, .count = 64 }; - struct param_range cbs = { .min = 64, .max = 256, .count = 64 }; + struct param_range rfds = { .min = 16, .max = 256, .count = 256 }; + struct param_range cbs = { .min = 64, .max = 256, .count = 128 }; pci_read_config_byte(nic->pdev, PCI_REVISION_ID, &nic->rev_id); /* MAC type is encoded as rev ID; exception: ICH is treated as 82559 */ @@ -1007,25 +1007,213 @@ static void e100_configure(struct nic *nic, struct cb *cb, struct sk_buff *skb) c[16], c[17], c[18], c[19], c[20], c[21], c[22], c[23]); } +/********************************************************/ +/* Micro code for 8086:1229 Rev 8 */ +/********************************************************/ + +/* Parameter values for the D101M B-step */ +#define D101M_CPUSAVER_TIMER_DWORD 78 +#define D101M_CPUSAVER_BUNDLE_DWORD 65 +#define D101M_CPUSAVER_MIN_SIZE_DWORD 126 + +#define D101M_B_RCVBUNDLE_UCODE \ +{\ +0x00550215, 0xFFFF0437, 0xFFFFFFFF, 0x06A70789, 0xFFFFFFFF, 0x0558FFFF, \ +0x000C0001, 0x00101312, 0x000C0008, 0x00380216, \ +0x0010009C, 0x00204056, 0x002380CC, 0x00380056, \ +0x0010009C, 0x00244C0B, 0x00000800, 0x00124818, \ +0x00380438, 0x00000000, 0x00140000, 0x00380555, \ +0x00308000, 0x00100662, 0x00100561, 0x000E0408, \ +0x00134861, 0x000C0002, 0x00103093, 0x00308000, \ +0x00100624, 0x00100561, 0x000E0408, 0x00100861, \ +0x000C007E, 0x00222C21, 0x000C0002, 0x00103093, \ +0x00380C7A, 0x00080000, 0x00103090, 0x00380C7A, \ +0x00000000, 0x00000000, 0x00000000, 0x00000000, \ +0x0010009C, 0x00244C2D, 0x00010004, 0x00041000, \ +0x003A0437, 0x00044010, 0x0038078A, 0x00000000, \ +0x00100099, 0x00206C7A, 0x0010009C, 0x00244C48, \ +0x00130824, 0x000C0001, 0x00101213, 0x00260C75, \ +0x00041000, 0x00010004, 0x00130826, 0x000C0006, \ +0x002206A8, 0x0013C926, 0x00101313, 0x003806A8, \ +0x00000000, 0x00000000, 0x00000000, 0x00000000, \ +0x00000000, 0x00000000, 0x00000000, 0x00000000, \ +0x00080600, 0x00101B10, 0x00050004, 0x00100826, \ +0x00101210, 0x00380C34, 0x00000000, 0x00000000, \ +0x0021155B, 0x00100099, 0x00206559, 0x0010009C, \ +0x00244559, 0x00130836, 0x000C0000, 0x00220C62, \ +0x000C0001, 0x00101B13, 0x00229C0E, 0x00210C0E, \ +0x00226C0E, 0x00216C0E, 0x0022FC0E, 0x00215C0E, \ +0x00214C0E, 0x00380555, 0x00010004, 0x00041000, \ +0x00278C67, 0x00040800, 0x00018100, 0x003A0437, \ +0x00130826, 0x000C0001, 0x00220559, 0x00101313, \ +0x00380559, 0x00000000, 0x00000000, 0x00000000, \ +0x00000000, 0x00000000, 0x00000000, 0x00000000, \ +0x00000000, 0x00130831, 0x0010090B, 0x00124813, \ +0x000CFF80, 0x002606AB, 0x00041000, 0x00010004, \ +0x003806A8, 0x00000000, 0x00000000, 0x00000000, \ +} + +/********************************************************/ +/* Micro code for 8086:1229 Rev 9 */ +/********************************************************/ + +/* Parameter values for the D101S */ +#define D101S_CPUSAVER_TIMER_DWORD 78 +#define D101S_CPUSAVER_BUNDLE_DWORD 67 +#define D101S_CPUSAVER_MIN_SIZE_DWORD 128 + +#define D101S_RCVBUNDLE_UCODE \ +{\ +0x00550242, 0xFFFF047E, 0xFFFFFFFF, 0x06FF0818, 0xFFFFFFFF, 0x05A6FFFF, \ +0x000C0001, 0x00101312, 0x000C0008, 0x00380243, \ +0x0010009C, 0x00204056, 0x002380D0, 0x00380056, \ +0x0010009C, 0x00244F8B, 0x00000800, 0x00124818, \ +0x0038047F, 0x00000000, 0x00140000, 0x003805A3, \ +0x00308000, 0x00100610, 0x00100561, 0x000E0408, \ +0x00134861, 0x000C0002, 0x00103093, 0x00308000, \ +0x00100624, 0x00100561, 0x000E0408, 0x00100861, \ +0x000C007E, 0x00222FA1, 0x000C0002, 0x00103093, \ +0x00380F90, 0x00080000, 0x00103090, 0x00380F90, \ +0x00000000, 0x00000000, 0x00000000, 0x00000000, \ +0x0010009C, 0x00244FAD, 0x00010004, 0x00041000, \ +0x003A047E, 0x00044010, 0x00380819, 0x00000000, \ +0x00100099, 0x00206FFD, 0x0010009A, 0x0020AFFD, \ +0x0010009C, 0x00244FC8, 0x00130824, 0x000C0001, \ +0x00101213, 0x00260FF7, 0x00041000, 0x00010004, \ +0x00130826, 0x000C0006, 0x00220700, 0x0013C926, \ +0x00101313, 0x00380700, 0x00000000, 0x00000000, \ +0x00000000, 0x00000000, 0x00000000, 0x00000000, \ +0x00080600, 0x00101B10, 0x00050004, 0x00100826, \ +0x00101210, 0x00380FB6, 0x00000000, 0x00000000, \ +0x002115A9, 0x00100099, 0x002065A7, 0x0010009A, \ +0x0020A5A7, 0x0010009C, 0x002445A7, 0x00130836, \ +0x000C0000, 0x00220FE4, 0x000C0001, 0x00101B13, \ +0x00229F8E, 0x00210F8E, 0x00226F8E, 0x00216F8E, \ +0x0022FF8E, 0x00215F8E, 0x00214F8E, 0x003805A3, \ +0x00010004, 0x00041000, 0x00278FE9, 0x00040800, \ +0x00018100, 0x003A047E, 0x00130826, 0x000C0001, \ +0x002205A7, 0x00101313, 0x003805A7, 0x00000000, \ +0x00000000, 0x00000000, 0x00000000, 0x00000000, \ +0x00000000, 0x00000000, 0x00000000, 0x00130831, \ +0x0010090B, 0x00124813, 0x000CFF80, 0x00260703, \ +0x00041000, 0x00010004, 0x00380700 \ +} + +/********************************************************/ +/* Micro code for the 8086:1229 Rev F/10 */ +/********************************************************/ + +/* Parameter values for the D102 E-step */ +#define D102_E_CPUSAVER_TIMER_DWORD 42 +#define D102_E_CPUSAVER_BUNDLE_DWORD 54 +#define D102_E_CPUSAVER_MIN_SIZE_DWORD 46 + +#define D102_E_RCVBUNDLE_UCODE \ +{\ +0x007D028F, 0x0E4204F9, 0x14ED0C85, 0x14FA14E9, 0x0EF70E36, 0x1FFF1FFF, \ +0x00E014B9, 0x00000000, 0x00000000, 0x00000000, \ +0x00E014BD, 0x00000000, 0x00000000, 0x00000000, \ +0x00E014D5, 0x00000000, 0x00000000, 0x00000000, \ +0x00000000, 0x00000000, 0x00000000, 0x00000000, \ +0x00E014C1, 0x00000000, 0x00000000, 0x00000000, \ +0x00000000, 0x00000000, 0x00000000, 0x00000000, \ +0x00000000, 0x00000000, 0x00000000, 0x00000000, \ +0x00000000, 0x00000000, 0x00000000, 0x00000000, \ +0x00E014C8, 0x00000000, 0x00000000, 0x00000000, \ +0x00200600, 0x00E014EE, 0x00000000, 0x00000000, \ +0x0030FF80, 0x00940E46, 0x00038200, 0x00102000, \ +0x00E00E43, 0x00000000, 0x00000000, 0x00000000, \ +0x00300006, 0x00E014FB, 0x00000000, 0x00000000, \ +0x00000000, 0x00000000, 0x00000000, 0x00000000, \ +0x00000000, 0x00000000, 0x00000000, 0x00000000, \ +0x00000000, 0x00000000, 0x00000000, 0x00000000, \ +0x00906E41, 0x00800E3C, 0x00E00E39, 0x00000000, \ +0x00906EFD, 0x00900EFD, 0x00E00EF8, 0x00000000, \ +0x00000000, 0x00000000, 0x00000000, 0x00000000, \ +0x00000000, 0x00000000, 0x00000000, 0x00000000, \ +0x00000000, 0x00000000, 0x00000000, 0x00000000, \ +0x00000000, 0x00000000, 0x00000000, 0x00000000, \ +0x00000000, 0x00000000, 0x00000000, 0x00000000, \ +0x00000000, 0x00000000, 0x00000000, 0x00000000, \ +0x00000000, 0x00000000, 0x00000000, 0x00000000, \ +0x00000000, 0x00000000, 0x00000000, 0x00000000, \ +0x00000000, 0x00000000, 0x00000000, 0x00000000, \ +0x00000000, 0x00000000, 0x00000000, 0x00000000, \ +0x00000000, 0x00000000, 0x00000000, 0x00000000, \ +0x00000000, 0x00000000, 0x00000000, 0x00000000, \ +0x00000000, 0x00000000, 0x00000000, 0x00000000, \ +0x00000000, 0x00000000, 0x00000000, 0x00000000, \ +} + static void e100_load_ucode(struct nic *nic, struct cb *cb, struct sk_buff *skb) { - int i; - static const u32 ucode[UCODE_SIZE] = { - /* NFS packets are misinterpreted as TCO packets and - * incorrectly routed to the BMC over SMBus. This - * microcode patch checks the fragmented IP bit in the - * NFS/UDP header to distinguish between NFS and TCO. */ - 0x0EF70E36, 0x1FFF1FFF, 0x1FFF1FFF, 0x1FFF1FFF, 0x1FFF1FFF, - 0x1FFF1FFF, 0x00906E41, 0x00800E3C, 0x00E00E39, 0x00000000, - 0x00906EFD, 0x00900EFD, 0x00E00EF8, - }; +/* *INDENT-OFF* */ + static struct { + u32 ucode[UCODE_SIZE + 1]; + u8 mac; + u8 timer_dword; + u8 bundle_dword; + u8 min_size_dword; + } ucode_opts[] = { + { D101M_B_RCVBUNDLE_UCODE, + mac_82559_D101M, + D101M_CPUSAVER_TIMER_DWORD, + D101M_CPUSAVER_BUNDLE_DWORD, + D101M_CPUSAVER_MIN_SIZE_DWORD }, + { D101S_RCVBUNDLE_UCODE, + mac_82559_D101S, + D101S_CPUSAVER_TIMER_DWORD, + D101S_CPUSAVER_BUNDLE_DWORD, + D101S_CPUSAVER_MIN_SIZE_DWORD }, + { D102_E_RCVBUNDLE_UCODE, + mac_82551_F, + D102_E_CPUSAVER_TIMER_DWORD, + D102_E_CPUSAVER_BUNDLE_DWORD, + D102_E_CPUSAVER_MIN_SIZE_DWORD }, + { D102_E_RCVBUNDLE_UCODE, + mac_82551_10, + D102_E_CPUSAVER_TIMER_DWORD, + D102_E_CPUSAVER_BUNDLE_DWORD, + D102_E_CPUSAVER_MIN_SIZE_DWORD }, + { {0}, 0, 0, 0, 0} + }, *opts; +/* *INDENT-ON* */ + +#define BUNDLESMALL 1 +#define BUNDLEMAX 50 +#define INTDELAY 15000 + + opts = ucode_opts; + + /* do not load u-code for ICH devices */ + if (nic->flags & ich) + return; + + /* Search for ucode match against h/w rev_id */ + while (opts->mac) { + if (nic->mac == opts->mac) { + int i; + u32 *ucode = opts->ucode; + + /* Insert user-tunable settings */ + ucode[opts->timer_dword] &= 0xFFFF0000; + ucode[opts->timer_dword] |= + (u16) INTDELAY; + ucode[opts->bundle_dword] &= 0xFFFF0000; + ucode[opts->bundle_dword] |= (u16) BUNDLEMAX; + ucode[opts->min_size_dword] &= 0xFFFF0000; + ucode[opts->min_size_dword] |= + (BUNDLESMALL) ? 0xFFFF : 0xFF80; + + for(i = 0; i < UCODE_SIZE; i++) + cb->u.ucode[i] = cpu_to_le32(ucode[i]); + cb->command = cpu_to_le16(cb_ucode); + return; + } + opts++; + } - if(nic->mac == mac_82551_F || nic->mac == mac_82551_10) { - for(i = 0; i < UCODE_SIZE; i++) - cb->u.ucode[i] = cpu_to_le32(ucode[i]); - cb->command = cpu_to_le16(cb_ucode); - } else - cb->command = cpu_to_le16(cb_nop); + cb->command = cpu_to_le16(cb_nop); } static void e100_setup_iaaddr(struct nic *nic, struct cb *cb, -- cgit v1.2.3 From 611494dccacb3e42f55359df74d604b67312598b Mon Sep 17 00:00:00 2001 From: Malli Chilakala Date: Thu, 25 Aug 2005 13:06:52 -0700 Subject: [PATCH] e100: Driver version, white space, comments & other Driver version, white space, comments & other Signed-off-by: Mallikarjuna R Chilakala Signed-off-by: Ganesh Venkatesan Signed-off-by: John Ronciak Signed-off-by: Jeff Garzik --- drivers/net/e100.c | 7 ++++--- 1 file changed, 4 insertions(+), 3 deletions(-) diff --git a/drivers/net/e100.c b/drivers/net/e100.c index 7e303744dd5..25cc20e415d 100644 --- a/drivers/net/e100.c +++ b/drivers/net/e100.c @@ -1,7 +1,7 @@ /******************************************************************************* - Copyright(c) 1999 - 2004 Intel Corporation. All rights reserved. + Copyright(c) 1999 - 2005 Intel Corporation. All rights reserved. This program is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free @@ -156,7 +156,7 @@ #define DRV_NAME "e100" #define DRV_EXT "-NAPI" -#define DRV_VERSION "3.4.8-k2"DRV_EXT +#define DRV_VERSION "3.4.14-k2"DRV_EXT #define DRV_DESCRIPTION "Intel(R) PRO/100 Network Driver" #define DRV_COPYRIGHT "Copyright(c) 1999-2005 Intel Corporation" #define PFX DRV_NAME ": " @@ -1504,7 +1504,7 @@ static inline void e100_xmit_prepare(struct nic *nic, struct cb *cb, cb->u.tcb.tbd_count = 1; cb->u.tcb.tbd.buf_addr = cpu_to_le32(pci_map_single(nic->pdev, skb->data, skb->len, PCI_DMA_TODEVICE)); - // check for mapping failure? + /* check for mapping failure? */ cb->u.tcb.tbd.size = cpu_to_le16(skb->len); } @@ -1896,6 +1896,7 @@ static int e100_poll(struct net_device *netdev, int *budget) static void e100_netpoll(struct net_device *netdev) { struct nic *nic = netdev_priv(netdev); + e100_disable_irq(nic); e100_intr(nic->pdev->irq, netdev, NULL); e100_tx_clean(nic); -- cgit v1.2.3 From 3690b6c124fbc7259634f3b80d92a6d9fe51ec79 Mon Sep 17 00:00:00 2001 From: Francois Romieu Date: Fri, 26 Aug 2005 00:30:37 +0200 Subject: [PATCH] sis190: complete the mii probe before registering the netdevice The userspace must not be able to issue ethtool command and manage the mii before it is completely initialized. Avoid some pesky "eth%d" messages. Signed-off-by: Arnaud Patard Signed-off-by: Francois Romieu Signed-off-by: Jeff Garzik --- drivers/net/sis190.c | 23 ++++++++++++----------- 1 file changed, 12 insertions(+), 11 deletions(-) diff --git a/drivers/net/sis190.c b/drivers/net/sis190.c index 915ff009c29..bf3440aa6c2 100644 --- a/drivers/net/sis190.c +++ b/drivers/net/sis190.c @@ -1271,7 +1271,7 @@ static u16 sis190_default_phy(struct net_device *dev) mii_if->phy_id = phy_default->phy_id; net_probe(tp, KERN_INFO "%s: Using transceiver at address %d as default.\n", - dev->name, mii_if->phy_id); + pci_name(tp->pci_dev), mii_if->phy_id); } status = mdio_read(ioaddr, mii_if->phy_id, MII_BMCR); @@ -1312,8 +1312,8 @@ static void sis190_init_phy(struct net_device *dev, struct sis190_private *tp, phy->type = UNKNOWN; net_probe(tp, KERN_INFO "%s: %s transceiver at address %d.\n", - dev->name, (phy->type == UNKNOWN) ? "Unknown PHY" : p->name, - phy_id); + pci_name(tp->pci_dev), + (phy->type == UNKNOWN) ? "Unknown PHY" : p->name, phy_id); } /** @@ -1358,7 +1358,7 @@ static int __devinit sis190_mii_probe(struct net_device *dev) if (list_empty(&tp->first_phy)) { net_probe(tp, KERN_INFO "%s: No MII transceivers found!\n", - dev->name); + pci_name(tp->pci_dev)); rc = -EIO; goto out; } @@ -1780,15 +1780,16 @@ static int __devinit sis190_init_one(struct pci_dev *pdev, dev->base_addr = (unsigned long) 0xdead; spin_lock_init(&tp->lock); - rc = register_netdev(dev); + + rc = sis190_mii_probe(dev); if (rc < 0) goto err_release_board; - pci_set_drvdata(pdev, dev); - - rc = sis190_mii_probe(dev); + rc = register_netdev(dev); if (rc < 0) - goto err_unregister_dev; + goto err_remove_mii; + + pci_set_drvdata(pdev, dev); net_probe(tp, KERN_INFO "%s: %s at %p (IRQ: %d), " "%2.2x:%2.2x:%2.2x:%2.2x:%2.2x:%2.2x\n", @@ -1804,8 +1805,8 @@ static int __devinit sis190_init_one(struct pci_dev *pdev, out: return rc; -err_unregister_dev: - unregister_netdev(dev); +err_remove_mii: + sis190_mii_remove(dev); err_release_board: sis190_release_board(pdev); goto out; -- cgit v1.2.3 From 3998b70fd0ab40a276147a0f55816d383fcbeb54 Mon Sep 17 00:00:00 2001 From: Liam Girdwood Date: Fri, 29 Jul 2005 11:41:55 +0200 Subject: [ALSA] WM97xx AC97 codec controls AC97 Codec o Enhanced current WM97xx support to provide additional controls and use the kcontrol suffix naming convention. o Added AC97_HAS_NO_MIC, AC97_HAS_NO_TONE and AC97_HAS_NO_STD_PCM. o Cleaned up WM97xx related comments. o Removed some wm9713 double mono controls and replaced with stereo controls. Signed-off-by: Liam Girdwood Signed-off-by: Takashi Iwai --- include/sound/ac97_codec.h | 3 + sound/pci/ac97/ac97_codec.c | 44 +++-- sound/pci/ac97/ac97_patch.c | 429 ++++++++++++++++++++++++++++++++++---------- 3 files changed, 367 insertions(+), 109 deletions(-) diff --git a/include/sound/ac97_codec.h b/include/sound/ac97_codec.h index 1309c12b8f7..cbe72e06c46 100644 --- a/include/sound/ac97_codec.h +++ b/include/sound/ac97_codec.h @@ -374,6 +374,9 @@ #define AC97_HAS_NO_PC_BEEP (1<<12) /* no PC Beep volume */ #define AC97_HAS_NO_VIDEO (1<<13) /* no Video volume */ #define AC97_HAS_NO_CD (1<<14) /* no CD volume */ +#define AC97_HAS_NO_MIC (1<<15) /* no MIC volume */ +#define AC97_HAS_NO_TONE (1<<16) /* no Tone volume */ +#define AC97_HAS_NO_STD_PCM (1<<17) /* no standard AC97 PCM volume and mute */ /* rates indexes */ #define AC97_RATES_FRONT_DAC 0 diff --git a/sound/pci/ac97/ac97_codec.c b/sound/pci/ac97/ac97_codec.c index 6983eea226d..cbf790270c3 100644 --- a/sound/pci/ac97/ac97_codec.c +++ b/sound/pci/ac97/ac97_codec.c @@ -1307,16 +1307,18 @@ static int snd_ac97_mixer_build(ac97_t * ac97) } /* build master tone controls */ - if (snd_ac97_try_volume_mix(ac97, AC97_MASTER_TONE)) { - for (idx = 0; idx < 2; idx++) { - if ((err = snd_ctl_add(card, kctl = snd_ac97_cnew(&snd_ac97_controls_tone[idx], ac97))) < 0) - return err; - if (ac97->id == AC97_ID_YMF753) { - kctl->private_value &= ~(0xff << 16); - kctl->private_value |= 7 << 16; + if (!(ac97->flags & AC97_HAS_NO_TONE)) { + if (snd_ac97_try_volume_mix(ac97, AC97_MASTER_TONE)) { + for (idx = 0; idx < 2; idx++) { + if ((err = snd_ctl_add(card, kctl = snd_ac97_cnew(&snd_ac97_controls_tone[idx], ac97))) < 0) + return err; + if (ac97->id == AC97_ID_YMF753) { + kctl->private_value &= ~(0xff << 16); + kctl->private_value |= 7 << 16; + } } + snd_ac97_write_cache(ac97, AC97_MASTER_TONE, 0x0f0f); } - snd_ac97_write_cache(ac97, AC97_MASTER_TONE, 0x0f0f); } /* build PC Speaker controls */ @@ -1339,11 +1341,13 @@ static int snd_ac97_mixer_build(ac97_t * ac97) } /* build MIC controls */ - if (snd_ac97_try_volume_mix(ac97, AC97_MIC)) { - if ((err = snd_ac97_cmix_new(card, "Mic Playback", AC97_MIC, ac97)) < 0) - return err; - if ((err = snd_ctl_add(card, snd_ac97_cnew(&snd_ac97_controls_mic_boost, ac97))) < 0) - return err; + if (!(ac97->flags & AC97_HAS_NO_MIC)) { + if (snd_ac97_try_volume_mix(ac97, AC97_MIC)) { + if ((err = snd_ac97_cmix_new(card, "Mic Playback", AC97_MIC, ac97)) < 0) + return err; + if ((err = snd_ctl_add(card, snd_ac97_cnew(&snd_ac97_controls_mic_boost, ac97))) < 0) + return err; + } } /* build Line controls */ @@ -1402,12 +1406,14 @@ static int snd_ac97_mixer_build(ac97_t * ac97) } snd_ac97_write_cache(ac97, AC97_PCM, init_val); } else { - if (ac97->flags & AC97_HAS_NO_PCM_VOL) - err = snd_ac97_cmute_new(card, "PCM Playback Switch", AC97_PCM, ac97); - else - err = snd_ac97_cmix_new(card, "PCM Playback", AC97_PCM, ac97); - if (err < 0) - return err; + if (!(ac97->flags & AC97_HAS_NO_STD_PCM)) { + if (ac97->flags & AC97_HAS_NO_PCM_VOL) + err = snd_ac97_cmute_new(card, "PCM Playback Switch", AC97_PCM, ac97); + else + err = snd_ac97_cmix_new(card, "PCM Playback", AC97_PCM, ac97); + if (err < 0) + return err; + } } /* build Capture controls */ diff --git a/sound/pci/ac97/ac97_patch.c b/sound/pci/ac97/ac97_patch.c index 66edc857d3e..d4bb99fc896 100644 --- a/sound/pci/ac97/ac97_patch.c +++ b/sound/pci/ac97/ac97_patch.c @@ -370,141 +370,387 @@ int patch_yamaha_ymf753(ac97_t * ac97) * added support for WM9705,WM9708,WM9709,WM9710,WM9711,WM9712 and WM9717. */ -int patch_wolfson03(ac97_t * ac97) +static const snd_kcontrol_new_t wm97xx_snd_ac97_controls[] = { +AC97_DOUBLE("Front Playback Volume", AC97_WM97XX_FMIXER_VOL, 8, 0, 31, 1), +AC97_SINGLE("Front Playback Switch", AC97_WM97XX_FMIXER_VOL, 15, 1, 1), +}; + +int patch_wolfson_wm9703_specific(ac97_t * ac97) { /* This is known to work for the ViewSonic ViewPad 1000 - Randolph Bentson */ + * Randolph Bentson + * WM9703/9707/9708/9717 + */ + int err, i; + + for (i = 0; i < ARRAY_SIZE(wm97xx_snd_ac97_controls); i++) { + if ((err = snd_ctl_add(ac97->bus->card, snd_ac97_cnew(&wm97xx_snd_ac97_controls[i], ac97))) < 0) + return err; + } + snd_ac97_write_cache(ac97, AC97_WM97XX_FMIXER_VOL, 0x0808); + return 0; +} - // WM9703/9707/9708/9717 - snd_ac97_write_cache(ac97, AC97_WM97XX_FMIXER_VOL, 0x0808); - snd_ac97_write_cache(ac97, AC97_GENERAL_PURPOSE, 0x8000); +static struct snd_ac97_build_ops patch_wolfson_wm9703_ops = { + .build_specific = patch_wolfson_wm9703_specific, +}; + +int patch_wolfson03(ac97_t * ac97) +{ + ac97->build_ops = &patch_wolfson_wm9703_ops; return 0; } - -int patch_wolfson04(ac97_t * ac97) + +static const snd_kcontrol_new_t wm9704_snd_ac97_controls[] = { +AC97_DOUBLE("Front Playback Volume", AC97_WM97XX_FMIXER_VOL, 8, 0, 31, 1), +AC97_SINGLE("Front Playback Switch", AC97_WM97XX_FMIXER_VOL, 15, 1, 1), +AC97_DOUBLE("Rear Playback Volume", AC97_WM9704_RMIXER_VOL, 8, 0, 31, 1), +AC97_SINGLE("Rear Playback Switch", AC97_WM9704_RMIXER_VOL, 15, 1, 1), +AC97_DOUBLE("Rear DAC Volume", AC97_WM9704_RPCM_VOL, 8, 0, 31, 1), +AC97_DOUBLE("Surround Volume", AC97_SURROUND_MASTER, 8, 0, 31, 1), +}; + +int patch_wolfson_wm9704_specific(ac97_t * ac97) { - // WM9704M/9704Q - // set front and rear mixer volume - snd_ac97_write_cache(ac97, AC97_WM97XX_FMIXER_VOL, 0x0808); - snd_ac97_write_cache(ac97, AC97_WM9704_RMIXER_VOL, 0x0808); - - // patch for DVD noise + int err, i; + for (i = 0; i < ARRAY_SIZE(wm9704_snd_ac97_controls); i++) { + if ((err = snd_ctl_add(ac97->bus->card, snd_ac97_cnew(&wm9704_snd_ac97_controls[i], ac97))) < 0) + return err; + } + /* patch for DVD noise */ snd_ac97_write_cache(ac97, AC97_WM9704_TEST, 0x0200); - - // init vol - snd_ac97_write_cache(ac97, AC97_WM9704_RPCM_VOL, 0x0808); - - // set rear surround volume - snd_ac97_write_cache(ac97, AC97_SURROUND_MASTER, 0x0000); return 0; } - + +static struct snd_ac97_build_ops patch_wolfson_wm9704_ops = { + .build_specific = patch_wolfson_wm9704_specific, +}; + +int patch_wolfson04(ac97_t * ac97) +{ + /* WM9704M/9704Q */ + ac97->build_ops = &patch_wolfson_wm9704_ops; + return 0; +} + +int patch_wolfson_wm9705_specific(ac97_t * ac97) +{ + int err, i; + for (i = 0; i < ARRAY_SIZE(wm97xx_snd_ac97_controls); i++) { + if ((err = snd_ctl_add(ac97->bus->card, snd_ac97_cnew(&wm97xx_snd_ac97_controls[i], ac97))) < 0) + return err; + } + snd_ac97_write_cache(ac97, 0x72, 0x0808); + return 0; +} + +static struct snd_ac97_build_ops patch_wolfson_wm9705_ops = { + .build_specific = patch_wolfson_wm9705_specific, +}; + int patch_wolfson05(ac97_t * ac97) { - // WM9705, WM9710 - // set front mixer volume - snd_ac97_write_cache(ac97, AC97_WM97XX_FMIXER_VOL, 0x0808); + /* WM9705, WM9710 */ + ac97->build_ops = &patch_wolfson_wm9705_ops; + return 0; +} + +static const char* wm9711_alc_select[] = {"None", "Left", "Right", "Stereo"}; +static const char* wm9711_alc_mix[] = {"Stereo", "Right", "Left", "None"}; +static const char* wm9711_out3_src[] = {"Left", "VREF", "Left + Right", "Mono"}; +static const char* wm9711_out3_lrsrc[] = {"Master Mix", "Headphone Mix"}; +static const char* wm9711_rec_adc[] = {"Stereo", "Left", "Right", "Mute"}; +static const char* wm9711_base[] = {"Linear Control", "Adaptive Boost"}; +static const char* wm9711_rec_gain[] = {"+1.5dB Steps", "+0.75dB Steps"}; +static const char* wm9711_mic[] = {"Mic 1", "Differential", "Mic 2", "Stereo"}; +static const char* wm9711_rec_sel[] = + {"Mic 1", "NC", "NC", "Master Mix", "Line", "Headphone Mix", "Phone Mix", "Phone"}; +static const char* wm9711_ng_type[] = {"Constant Gain", "Mute"}; + +static const struct ac97_enum wm9711_enum[] = { +AC97_ENUM_SINGLE(AC97_PCI_SVID, 14, 4, wm9711_alc_select), +AC97_ENUM_SINGLE(AC97_VIDEO, 10, 4, wm9711_alc_mix), +AC97_ENUM_SINGLE(AC97_AUX, 9, 4, wm9711_out3_src), +AC97_ENUM_SINGLE(AC97_AUX, 8, 2, wm9711_out3_lrsrc), +AC97_ENUM_SINGLE(AC97_REC_SEL, 12, 4, wm9711_rec_adc), +AC97_ENUM_SINGLE(AC97_MASTER_TONE, 15, 2, wm9711_base), +AC97_ENUM_DOUBLE(AC97_REC_GAIN, 14, 6, 2, wm9711_rec_gain), +AC97_ENUM_SINGLE(AC97_MIC, 5, 4, wm9711_mic), +AC97_ENUM_DOUBLE(AC97_REC_SEL, 8, 0, 8, wm9711_rec_sel), +AC97_ENUM_SINGLE(AC97_PCI_SVID, 5, 2, wm9711_ng_type), +}; + +static const snd_kcontrol_new_t wm9711_snd_ac97_controls[] = { +AC97_SINGLE("ALC Target Volume", AC97_CODEC_CLASS_REV, 12, 15, 0), +AC97_SINGLE("ALC Hold Time", AC97_CODEC_CLASS_REV, 8, 15, 0), +AC97_SINGLE("ALC Decay Time", AC97_CODEC_CLASS_REV, 4, 15, 0), +AC97_SINGLE("ALC Attack Time", AC97_CODEC_CLASS_REV, 0, 15, 0), +AC97_ENUM("ALC Function", wm9711_enum[0]), +AC97_SINGLE("ALC Max Volume", AC97_PCI_SVID, 11, 7, 1), +AC97_SINGLE("ALC ZC Timeout", AC97_PCI_SVID, 9, 3, 1), +AC97_SINGLE("ALC ZC Switch", AC97_PCI_SVID, 8, 1, 0), +AC97_SINGLE("ALC NG Switch", AC97_PCI_SVID, 7, 1, 0), +AC97_ENUM("ALC NG Type", wm9711_enum[9]), +AC97_SINGLE("ALC NG Threshold", AC97_PCI_SVID, 0, 31, 1), + +AC97_SINGLE("Side Tone Switch", AC97_VIDEO, 15, 1, 1), +AC97_SINGLE("Side Tone Volume", AC97_VIDEO, 12, 7, 1), +AC97_ENUM("ALC Headphone Mux", wm9711_enum[1]), +AC97_SINGLE("ALC Headphone Volume", AC97_VIDEO, 7, 7, 1), + +AC97_SINGLE("Out3 Switch", AC97_AUX, 15, 1, 1), +AC97_SINGLE("Out3 ZC Switch", AC97_AUX, 7, 1, 1), +AC97_ENUM("Out3 Mux", wm9711_enum[2]), +AC97_ENUM("Out3 LR Mux", wm9711_enum[3]), +AC97_SINGLE("Out3 Volume", AC97_AUX, 0, 31, 1), + +AC97_SINGLE("Beep to Headphone Switch", AC97_PC_BEEP, 15, 1, 1), +AC97_SINGLE("Beep to Headphone Volume", AC97_PC_BEEP, 12, 7, 1), +AC97_SINGLE("Beep to Side Tone Switch", AC97_PC_BEEP, 11, 1, 1), +AC97_SINGLE("Beep to Side Tone Volume", AC97_PC_BEEP, 8, 7, 1), +AC97_SINGLE("Beep to Phone Switch", AC97_PC_BEEP, 7, 1, 1), +AC97_SINGLE("Beep to Phone Volume", AC97_PC_BEEP, 4, 7, 1), + +AC97_SINGLE("Aux to Headphone Switch", AC97_CD, 15, 1, 1), +AC97_SINGLE("Aux to Headphone Volume", AC97_CD, 12, 7, 1), +AC97_SINGLE("Aux to Side Tone Switch", AC97_CD, 11, 1, 1), +AC97_SINGLE("Aux to Side Tone Volume", AC97_CD, 8, 7, 1), +AC97_SINGLE("Aux to Phone Switch", AC97_CD, 7, 1, 1), +AC97_SINGLE("Aux to Phone Volume", AC97_CD, 4, 7, 1), + +AC97_SINGLE("Phone to Headphone Switch", AC97_PHONE, 15, 1, 1), +AC97_SINGLE("Phone to Master Switch", AC97_PHONE, 14, 1, 1), + +AC97_SINGLE("Line to Headphone Switch", AC97_LINE, 15, 1, 1), +AC97_SINGLE("Line to Master Switch", AC97_LINE, 14, 1, 1), +AC97_SINGLE("Line to Phone Switch", AC97_LINE, 13, 1, 1), + +AC97_SINGLE("PCM Playback to Headphone Switch", AC97_PCM, 15, 1, 1), +AC97_SINGLE("PCM Playback to Master Switch", AC97_PCM, 14, 1, 1), +AC97_SINGLE("PCM Playback to Phone Switch", AC97_PCM, 13, 1, 1), + +AC97_SINGLE("Capture 20dB Boost Switch", AC97_REC_SEL, 14, 1, 0), +AC97_ENUM("Capture to Phone Mux", wm9711_enum[4]), +AC97_SINGLE("Capture to Phone 20dB Boost Switch", AC97_REC_SEL, 11, 1, 1), +AC97_ENUM("Capture Select", wm9711_enum[8]), + +AC97_SINGLE("3D Upper Cut-off Switch", AC97_3D_CONTROL, 5, 1, 1), +AC97_SINGLE("3D Lower Cut-off Switch", AC97_3D_CONTROL, 4, 1, 1), + +AC97_ENUM("Bass Control", wm9711_enum[5]), +AC97_SINGLE("Bass Cut-off Switch", AC97_MASTER_TONE, 12, 1, 1), +AC97_SINGLE("Tone Cut-off Switch", AC97_MASTER_TONE, 4, 1, 1), +AC97_SINGLE("Playback Attenuate (-6dB) Switch", AC97_MASTER_TONE, 6, 1, 0), + +AC97_SINGLE("ADC Switch", AC97_REC_GAIN, 15, 1, 1), +AC97_ENUM("Capture Volume Steps", wm9711_enum[6]), +AC97_DOUBLE("Capture Volume", AC97_REC_GAIN, 8, 0, 15, 1), +AC97_SINGLE("Capture ZC Switch", AC97_REC_GAIN, 7, 1, 0), + +AC97_SINGLE("Mic 1 to Phone Switch", AC97_MIC, 14, 1, 1), +AC97_SINGLE("Mic 2 to Phone Switch", AC97_MIC, 13, 1, 1), +AC97_ENUM("Mic Select Source", wm9711_enum[7]), +AC97_SINGLE("Mic 1 Volume", AC97_MIC, 8, 32, 1), +AC97_SINGLE("Mic 20dB Boost Switch", AC97_MIC, 7, 1, 0), + +AC97_SINGLE("Master ZC Switch", AC97_MASTER, 7, 1, 0), +AC97_SINGLE("Headphone ZC Switch", AC97_HEADPHONE, 7, 1, 0), +AC97_SINGLE("Mono ZC Switch", AC97_MASTER_MONO, 7, 1, 0), +}; + +int patch_wolfson_wm9711_specific(ac97_t * ac97) +{ + int err, i; + + for (i = 0; i < ARRAY_SIZE(wm9711_snd_ac97_controls); i++) { + if ((err = snd_ctl_add(ac97->bus->card, snd_ac97_cnew(&wm9711_snd_ac97_controls[i], ac97))) < 0) + return err; + } + snd_ac97_write_cache(ac97, AC97_CODEC_CLASS_REV, 0x0808); + snd_ac97_write_cache(ac97, AC97_PCI_SVID, 0x0808); + snd_ac97_write_cache(ac97, AC97_VIDEO, 0x0808); + snd_ac97_write_cache(ac97, AC97_AUX, 0x0808); + snd_ac97_write_cache(ac97, AC97_PC_BEEP, 0x0808); + snd_ac97_write_cache(ac97, AC97_CD, 0x0000); return 0; } +static struct snd_ac97_build_ops patch_wolfson_wm9711_ops = { + .build_specific = patch_wolfson_wm9711_specific, +}; + int patch_wolfson11(ac97_t * ac97) { - // WM9711, WM9712 - // set out3 volume - snd_ac97_write_cache(ac97, AC97_WM9711_OUT3VOL, 0x0808); + /* WM9711, WM9712 */ + ac97->build_ops = &patch_wolfson_wm9711_ops; + + ac97->flags |= AC97_HAS_NO_REC_GAIN | AC97_STEREO_MUTES | AC97_HAS_NO_MIC | + AC97_HAS_NO_PC_BEEP | AC97_HAS_NO_VIDEO | AC97_HAS_NO_CD; + return 0; } -static const char* wm9713_mic_mixer[] = {"Stereo", "Mic1", "Mic2", "Mute"}; +static const char* wm9713_mic_mixer[] = {"Stereo", "Mic 1", "Mic 2", "Mute"}; static const char* wm9713_rec_mux[] = {"Stereo", "Left", "Right", "Mute"}; -static const char* wm9713_rec_src_l[] = {"Mic1", "Mic2", "Line L", "Mono In", "HP Mix L", "Spk Mix", "Mono Mix", "Zh"}; -static const char* wm9713_rec_src_r[] = {"Mic1", "Mic2", "Line R", "Mono In", "HP Mix R", "Spk Mix", "Mono Mix", "Zh"}; +static const char* wm9713_rec_src[] = + {"Mic 1", "Mic 2", "Line", "Mono In", "Headphone Mix", "Master Mix", + "Mono Mix", "Zh"}; +static const char* wm9713_rec_gain[] = {"+1.5dB Steps", "+0.75dB Steps"}; +static const char* wm9713_alc_select[] = {"None", "Left", "Right", "Stereo"}; +static const char* wm9713_mono_pga[] = {"Vmid", "Zh", "Mono Mix", "Inv 1"}; +static const char* wm9713_spk_pga[] = + {"Vmid", "Zh", "Headphone Mix", "Master Mix", "Inv", "NC", "NC", "NC"}; +static const char* wm9713_hp_pga[] = {"Vmid", "Zh", "Headphone Mix", "NC"}; +static const char* wm9713_out3_pga[] = {"Vmid", "Zh", "Inv 1", "NC"}; +static const char* wm9713_out4_pga[] = {"Vmid", "Zh", "Inv 2", "NC"}; +static const char* wm9713_dac_inv[] = + {"Off", "Mono Mix", "Master Mix", "Headphone Mix L", "Headphone Mix R", + "Headphone Mix Mono", "NC", "Vmid"}; +static const char* wm9713_base[] = {"Linear Control", "Adaptive Boost"}; +static const char* wm9713_ng_type[] = {"Constant Gain", "Mute"}; static const struct ac97_enum wm9713_enum[] = { AC97_ENUM_SINGLE(AC97_LINE, 3, 4, wm9713_mic_mixer), AC97_ENUM_SINGLE(AC97_VIDEO, 14, 4, wm9713_rec_mux), AC97_ENUM_SINGLE(AC97_VIDEO, 9, 4, wm9713_rec_mux), -AC97_ENUM_SINGLE(AC97_VIDEO, 3, 8, wm9713_rec_src_l), -AC97_ENUM_SINGLE(AC97_VIDEO, 0, 8, wm9713_rec_src_r), +AC97_ENUM_DOUBLE(AC97_VIDEO, 3, 0, 8, wm9713_rec_src), +AC97_ENUM_DOUBLE(AC97_CD, 14, 6, 2, wm9713_rec_gain), +AC97_ENUM_SINGLE(AC97_PCI_SVID, 14, 4, wm9713_alc_select), +AC97_ENUM_SINGLE(AC97_REC_GAIN, 14, 4, wm9713_mono_pga), +AC97_ENUM_DOUBLE(AC97_REC_GAIN, 11, 8, 8, wm9713_spk_pga), +AC97_ENUM_DOUBLE(AC97_REC_GAIN, 6, 4, 4, wm9713_hp_pga), +AC97_ENUM_SINGLE(AC97_REC_GAIN, 2, 4, wm9713_out3_pga), +AC97_ENUM_SINGLE(AC97_REC_GAIN, 0, 4, wm9713_out4_pga), +AC97_ENUM_DOUBLE(AC97_REC_GAIN_MIC, 13, 10, 8, wm9713_dac_inv), +AC97_ENUM_SINGLE(AC97_GENERAL_PURPOSE, 15, 2, wm9713_base), +AC97_ENUM_SINGLE(AC97_PCI_SVID, 5, 2, wm9713_ng_type), }; -static const snd_kcontrol_new_t wm13_snd_ac97_controls_line_in[] = { +static const snd_kcontrol_new_t wm13_snd_ac97_controls[] = { AC97_DOUBLE("Line In Volume", AC97_PC_BEEP, 8, 0, 31, 1), -AC97_SINGLE("Line In to Headphone Mute", AC97_PC_BEEP, 15, 1, 1), -AC97_SINGLE("Line In to Speaker Mute", AC97_PC_BEEP, 14, 1, 1), -AC97_SINGLE("Line In to Mono Mute", AC97_PC_BEEP, 13, 1, 1), -}; - -static const snd_kcontrol_new_t wm13_snd_ac97_controls_dac[] = { -AC97_DOUBLE("DAC Volume", AC97_PHONE, 8, 0, 31, 1), -AC97_SINGLE("DAC to Headphone Mute", AC97_PHONE, 15, 1, 1), -AC97_SINGLE("DAC to Speaker Mute", AC97_PHONE, 14, 1, 1), -AC97_SINGLE("DAC to Mono Mute", AC97_PHONE, 13, 1, 1), -}; - -static const snd_kcontrol_new_t wm13_snd_ac97_controls_mic[] = { -AC97_SINGLE("MICA Volume", AC97_MIC, 8, 31, 1), -AC97_SINGLE("MICB Volume", AC97_MIC, 0, 31, 1), -AC97_SINGLE("MICA to Mono Mute", AC97_LINE, 7, 1, 1), -AC97_SINGLE("MICB to Mono Mute", AC97_LINE, 6, 1, 1), -AC97_SINGLE("MIC Boost (+20dB)", AC97_LINE, 5, 1, 1), -AC97_ENUM("MIC Headphone Routing", wm9713_enum[0]), -AC97_SINGLE("MIC Headphone Mixer Volume", AC97_LINE, 0, 7, 1) +AC97_SINGLE("Line In to Headphone Switch", AC97_PC_BEEP, 15, 1, 1), +AC97_SINGLE("Line In to Master Switch", AC97_PC_BEEP, 14, 1, 1), +AC97_SINGLE("Line In to Mono Switch", AC97_PC_BEEP, 13, 1, 1), + +AC97_DOUBLE("PCM Playback Volume", AC97_PHONE, 8, 0, 31, 1), +AC97_SINGLE("PCM Playback to Headphone Switch", AC97_PHONE, 15, 1, 1), +AC97_SINGLE("PCM Playback to Master Switch", AC97_PHONE, 14, 1, 1), +AC97_SINGLE("PCM Playback to Mono Switch", AC97_PHONE, 13, 1, 1), + +AC97_SINGLE("Mic 1 Volume", AC97_MIC, 8, 31, 1), +AC97_SINGLE("Mic 2 Volume", AC97_MIC, 0, 31, 1), +AC97_SINGLE("Mic 1 to Mono Switch", AC97_LINE, 7, 1, 1), +AC97_SINGLE("Mic 2 to Mono Switch", AC97_LINE, 6, 1, 1), +AC97_SINGLE("Mic Boost (+20dB) Switch", AC97_LINE, 5, 1, 0), +AC97_ENUM("Mic to Headphone Mux", wm9713_enum[0]), +AC97_SINGLE("Mic Headphone Mixer Volume", AC97_LINE, 0, 7, 1), + +AC97_SINGLE("Capture Switch", AC97_CD, 15, 1, 1), +AC97_ENUM("Capture Volume Steps", wm9713_enum[4]), +AC97_DOUBLE("Capture Volume", AC97_CD, 8, 0, 15, 0), +AC97_SINGLE("Capture ZC Switch", AC97_CD, 7, 1, 0), + +AC97_ENUM("Capture to Headphone Mux", wm9713_enum[1]), +AC97_SINGLE("Capture to Headphone Volume", AC97_VIDEO, 11, 7, 1), +AC97_ENUM("Capture to Mono Mux", wm9713_enum[2]), +AC97_SINGLE("Capture to Mono Boost (+20dB) Switch", AC97_VIDEO, 8, 1, 0), +AC97_SINGLE("Capture ADC Boost (+20dB) Switch", AC97_VIDEO, 6, 1, 0), +AC97_ENUM("Capture Select", wm9713_enum[3]), + +AC97_SINGLE("ALC Target Volume", AC97_CODEC_CLASS_REV, 12, 15, 0), +AC97_SINGLE("ALC Hold Time", AC97_CODEC_CLASS_REV, 8, 15, 0), +AC97_SINGLE("ALC Decay Time ", AC97_CODEC_CLASS_REV, 4, 15, 0), +AC97_SINGLE("ALC Attack Time", AC97_CODEC_CLASS_REV, 0, 15, 0), +AC97_ENUM("ALC Function", wm9713_enum[5]), +AC97_SINGLE("ALC Max Volume", AC97_PCI_SVID, 11, 7, 0), +AC97_SINGLE("ALC ZC Timeout", AC97_PCI_SVID, 9, 3, 0), +AC97_SINGLE("ALC ZC Switch", AC97_PCI_SVID, 8, 1, 0), +AC97_SINGLE("ALC NG Switch", AC97_PCI_SVID, 7, 1, 0), +AC97_ENUM("ALC NG Type", wm9713_enum[13]), +AC97_SINGLE("ALC NG Threshold", AC97_PCI_SVID, 0, 31, 0), + +AC97_DOUBLE("Master ZC Switch", AC97_MASTER, 14, 6, 1, 0), +AC97_DOUBLE("Headphone ZC Switch", AC97_HEADPHONE, 14, 6, 1, 0), +AC97_DOUBLE("Out3/4 ZC Switch", AC97_MASTER_MONO, 14, 6, 1, 0), +AC97_SINGLE("Master Right Switch", AC97_MASTER, 7, 1, 1), +AC97_SINGLE("Headphone Right Switch", AC97_HEADPHONE, 7, 1, 1), +AC97_SINGLE("Out3/4 Right Switch", AC97_MASTER_MONO, 7, 1, 1), + +AC97_SINGLE("Mono In to Headphone Switch", AC97_MASTER_TONE, 15, 1, 1), +AC97_SINGLE("Mono In to Master Switch", AC97_MASTER_TONE, 14, 1, 1), +AC97_SINGLE("Mono In Volume", AC97_MASTER_TONE, 8, 31, 1), +AC97_SINGLE("Mono Switch", AC97_MASTER_TONE, 7, 1, 1), +AC97_SINGLE("Mono ZC Switch", AC97_MASTER_TONE, 6, 1, 0), +AC97_SINGLE("Mono Volume", AC97_MASTER_TONE, 0, 31, 1), + +AC97_SINGLE("PC Beep to Headphone Switch", AC97_AUX, 15, 1, 1), +AC97_SINGLE("PC Beep to Headphone Volume", AC97_AUX, 12, 7, 1), +AC97_SINGLE("PC Beep to Master Switch", AC97_AUX, 11, 1, 1), +AC97_SINGLE("PC Beep to Master Volume", AC97_AUX, 8, 7, 1), +AC97_SINGLE("PC Beep to Mono Switch", AC97_AUX, 7, 1, 1), +AC97_SINGLE("PC Beep to Mono Volume", AC97_AUX, 4, 7, 1), + +AC97_SINGLE("Voice to Headphone Switch", AC97_PCM, 15, 1, 1), +AC97_SINGLE("Voice to Headphone Volume", AC97_PCM, 12, 7, 1), +AC97_SINGLE("Voice to Master Switch", AC97_PCM, 11, 1, 1), +AC97_SINGLE("Voice to Master Volume", AC97_PCM, 8, 7, 1), +AC97_SINGLE("Voice to Mono Switch", AC97_PCM, 7, 1, 1), +AC97_SINGLE("Voice to Mono Volume", AC97_PCM, 4, 7, 1), + +AC97_SINGLE("Aux to Headphone Switch", AC97_REC_SEL, 15, 1, 1), +AC97_SINGLE("Aux to Headphone Volume", AC97_REC_SEL, 12, 7, 1), +AC97_SINGLE("Aux to Master Switch", AC97_REC_SEL, 11, 1, 1), +AC97_SINGLE("Aux to Master Volume", AC97_REC_SEL, 8, 7, 1), +AC97_SINGLE("Aux to Mono Switch", AC97_REC_SEL, 7, 1, 1), +AC97_SINGLE("Aux to Mono Volume", AC97_REC_SEL, 4, 7, 1), + +AC97_ENUM("Mono Input Mux", wm9713_enum[6]), +AC97_ENUM("Master Input Mux", wm9713_enum[7]), +AC97_ENUM("Headphone Input Mux", wm9713_enum[8]), +AC97_ENUM("Out 3 Input Mux", wm9713_enum[9]), +AC97_ENUM("Out 4 Input Mux", wm9713_enum[10]), + +AC97_ENUM("Bass Control", wm9713_enum[12]), +AC97_SINGLE("Bass Cut-off Switch", AC97_GENERAL_PURPOSE, 12, 1, 1), +AC97_SINGLE("Tone Cut-off Switch", AC97_GENERAL_PURPOSE, 4, 1, 1), +AC97_SINGLE("Playback Attenuate (-6dB) Switch", AC97_GENERAL_PURPOSE, 6, 1, 0), +AC97_SINGLE("Bass Volume", AC97_GENERAL_PURPOSE, 8, 15, 1), +AC97_SINGLE("Tone Volume", AC97_GENERAL_PURPOSE, 0, 15, 1), }; -static const snd_kcontrol_new_t wm13_snd_ac97_controls_adc[] = { -AC97_SINGLE("ADC Mute", AC97_CD, 15, 1, 1), -AC97_DOUBLE("Gain Step Size (1.5dB/0.75dB)", AC97_CD, 14, 6, 1, 1), -AC97_DOUBLE("ADC Volume",AC97_CD, 8, 0, 15, 0), -AC97_SINGLE("ADC Zero Cross", AC97_CD, 7, 1, 1), +static const snd_kcontrol_new_t wm13_snd_ac97_controls_3d[] = { +AC97_ENUM("Inv Input Mux", wm9713_enum[11]), +AC97_SINGLE("3D Upper Cut-off Switch", AC97_REC_GAIN_MIC, 5, 1, 0), +AC97_SINGLE("3D Lower Cut-off Switch", AC97_REC_GAIN_MIC, 4, 1, 0), +AC97_SINGLE("3D Depth", AC97_REC_GAIN_MIC, 0, 15, 1), }; -static const snd_kcontrol_new_t wm13_snd_ac97_controls_recsel[] = { -AC97_ENUM("Record to Headphone Path", wm9713_enum[1]), -AC97_SINGLE("Record to Headphone Volume", AC97_VIDEO, 11, 7, 0), -AC97_ENUM("Record to Mono Path", wm9713_enum[2]), -AC97_SINGLE("Record to Mono Boost (+20dB)", AC97_VIDEO, 8, 1, 0), -AC97_SINGLE("Record ADC Boost (+20dB)", AC97_VIDEO, 6, 1, 0), -AC97_ENUM("Record Select Left", wm9713_enum[3]), -AC97_ENUM("Record Select Right", wm9713_enum[4]), -}; +static int patch_wolfson_wm9713_3d (ac97_t * ac97) +{ + int err, i; + + for (i = 0; i < ARRAY_SIZE(wm13_snd_ac97_controls_3d); i++) { + if ((err = snd_ctl_add(ac97->bus->card, snd_ac97_cnew(&wm13_snd_ac97_controls_3d[i], ac97))) < 0) + return err; + } + return 0; +} static int patch_wolfson_wm9713_specific(ac97_t * ac97) { int err, i; - for (i = 0; i < ARRAY_SIZE(wm13_snd_ac97_controls_line_in); i++) { - if ((err = snd_ctl_add(ac97->bus->card, snd_ac97_cnew(&wm13_snd_ac97_controls_line_in[i], ac97))) < 0) + for (i = 0; i < ARRAY_SIZE(wm13_snd_ac97_controls); i++) { + if ((err = snd_ctl_add(ac97->bus->card, snd_ac97_cnew(&wm13_snd_ac97_controls[i], ac97))) < 0) return err; } snd_ac97_write_cache(ac97, AC97_PC_BEEP, 0x0808); - - for (i = 0; i < ARRAY_SIZE(wm13_snd_ac97_controls_dac); i++) { - if ((err = snd_ctl_add(ac97->bus->card, snd_ac97_cnew(&wm13_snd_ac97_controls_dac[i], ac97))) < 0) - return err; - } snd_ac97_write_cache(ac97, AC97_PHONE, 0x0808); - - for (i = 0; i < ARRAY_SIZE(wm13_snd_ac97_controls_mic); i++) { - if ((err = snd_ctl_add(ac97->bus->card, snd_ac97_cnew(&wm13_snd_ac97_controls_mic[i], ac97))) < 0) - return err; - } snd_ac97_write_cache(ac97, AC97_MIC, 0x0808); snd_ac97_write_cache(ac97, AC97_LINE, 0x00da); - - for (i = 0; i < ARRAY_SIZE(wm13_snd_ac97_controls_adc); i++) { - if ((err = snd_ctl_add(ac97->bus->card, snd_ac97_cnew(&wm13_snd_ac97_controls_adc[i], ac97))) < 0) - return err; - } snd_ac97_write_cache(ac97, AC97_CD, 0x0808); - - for (i = 0; i < ARRAY_SIZE(wm13_snd_ac97_controls_recsel); i++) { - if ((err = snd_ctl_add(ac97->bus->card, snd_ac97_cnew(&wm13_snd_ac97_controls_recsel[i], ac97))) < 0) - return err; - } snd_ac97_write_cache(ac97, AC97_VIDEO, 0xd612); snd_ac97_write_cache(ac97, AC97_REC_GAIN, 0x1ba0); - return 0; } @@ -525,6 +771,7 @@ static void patch_wolfson_wm9713_resume (ac97_t * ac97) static struct snd_ac97_build_ops patch_wolfson_wm9713_ops = { .build_specific = patch_wolfson_wm9713_specific, + .build_3d = patch_wolfson_wm9713_3d, #ifdef CONFIG_PM .suspend = patch_wolfson_wm9713_suspend, .resume = patch_wolfson_wm9713_resume @@ -533,10 +780,12 @@ static struct snd_ac97_build_ops patch_wolfson_wm9713_ops = { int patch_wolfson13(ac97_t * ac97) { + /* WM9713, WM9714 */ ac97->build_ops = &patch_wolfson_wm9713_ops; ac97->flags |= AC97_HAS_NO_REC_GAIN | AC97_STEREO_MUTES | AC97_HAS_NO_PHONE | - AC97_HAS_NO_PC_BEEP | AC97_HAS_NO_VIDEO | AC97_HAS_NO_CD; + AC97_HAS_NO_PC_BEEP | AC97_HAS_NO_VIDEO | AC97_HAS_NO_CD | AC97_HAS_NO_TONE | + AC97_HAS_NO_STD_PCM; snd_ac97_write_cache(ac97, AC97_EXTENDED_MID, 0xda00); snd_ac97_write_cache(ac97, AC97_EXTENDED_MSTATUS, 0x3810); -- cgit v1.2.3 From cb8e2f83851ff17b1b361644e82420a923fbc318 Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Fri, 29 Jul 2005 11:54:32 +0200 Subject: [ALSA] hda-codec - Fix reordering of surround channels HDA Codec driver - Fixed the reordering of surround channels. Originally reported by Nicolas GRAZIANO . - Show the selected ssid when debug option is set. Signed-off-by: Takashi Iwai --- sound/pci/hda/hda_codec.c | 23 ++++++++++++++++++++--- 1 file changed, 20 insertions(+), 3 deletions(-) diff --git a/sound/pci/hda/hda_codec.c b/sound/pci/hda/hda_codec.c index e2cf0238728..d3ac7530ec8 100644 --- a/sound/pci/hda/hda_codec.c +++ b/sound/pci/hda/hda_codec.c @@ -1541,8 +1541,11 @@ int snd_hda_check_board_config(struct hda_codec *codec, const struct hda_board_c for (c = tbl; c->modelname || c->pci_subvendor; c++) { if (c->pci_subvendor == subsystem_vendor && (! c->pci_subdevice /* all match */|| - (c->pci_subdevice == subsystem_device))) + (c->pci_subdevice == subsystem_device))) { + snd_printdd(KERN_INFO "hda_codec: PCI %x:%x, codec config %d is selected\n", + subsystem_vendor, subsystem_device, c->config); return c->config; + } } } return -1; @@ -1803,11 +1806,25 @@ int snd_hda_parse_pin_def_config(struct hda_codec *codec, struct auto_pin_cfg *c cfg->line_out_pins[j] = nid; } - /* Swap surround and CLFE: the association order is front/CLFE/surr/back */ - if (cfg->line_outs >= 3) { + /* Reorder the surround channels + * ALSA sequence is front/surr/clfe/side + * HDA sequence is: + * 4-ch: front/surr => OK as it is + * 6-ch: front/clfe/surr + * 8-ch: front/clfe/side/surr + */ + switch (cfg->line_outs) { + case 3: nid = cfg->line_out_pins[1]; cfg->line_out_pins[1] = cfg->line_out_pins[2]; cfg->line_out_pins[2] = nid; + break; + case 4: + nid = cfg->line_out_pins[1]; + cfg->line_out_pins[1] = cfg->line_out_pins[3]; + cfg->line_out_pins[3] = cfg->line_out_pins[2]; + cfg->line_out_pins[2] = nid; + break; } return 0; -- cgit v1.2.3 From d827560c96346e0b8b02c1000cc347d73488c818 Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Fri, 29 Jul 2005 11:56:41 +0200 Subject: [ALSA] hda-codec - Add default config for ASUS P5AD2 HDA Codec driver Added the default config for ASUS P5AD2. Signed-off-by: Takashi Iwai --- sound/pci/hda/patch_cmedia.c | 1 + 1 file changed, 1 insertion(+) diff --git a/sound/pci/hda/patch_cmedia.c b/sound/pci/hda/patch_cmedia.c index 86f195f19ee..07fb4f5a54b 100644 --- a/sound/pci/hda/patch_cmedia.c +++ b/sound/pci/hda/patch_cmedia.c @@ -647,6 +647,7 @@ static struct hda_board_config cmi9880_cfg_tbl[] = { { .modelname = "min_fp", .config = CMI_MIN_FP }, { .modelname = "full", .config = CMI_FULL }, { .modelname = "full_dig", .config = CMI_FULL_DIG }, + { .pci_subvendor = 0x1043, .pci_subdevice = 0x813d, .config = CMI_FULL_DIG }, /* ASUS P5AD2 */ { .modelname = "allout", .config = CMI_ALLOUT }, { .modelname = "auto", .config = CMI_AUTO }, {} /* terminator */ -- cgit v1.2.3 From b9f5a89c74e541533766dcda55d34a06253f60f3 Mon Sep 17 00:00:00 2001 From: Nicolas Graziano Date: Fri, 29 Jul 2005 12:17:20 +0200 Subject: [ALSA] hda-codec - Fix LFE volume/switch HDA Codec driver Fixed LFE volume/switch control. Signed-off-by: Nicolas Graziano Signed-off-by: Takashi Iwai --- sound/pci/hda/hda_codec.c | 13 +++++++++---- 1 file changed, 9 insertions(+), 4 deletions(-) diff --git a/sound/pci/hda/hda_codec.c b/sound/pci/hda/hda_codec.c index d3ac7530ec8..026ae726d87 100644 --- a/sound/pci/hda/hda_codec.c +++ b/sound/pci/hda/hda_codec.c @@ -749,12 +749,14 @@ int snd_hda_mixer_amp_volume_put(snd_kcontrol_t *kcontrol, snd_ctl_elem_value_t long *valp = ucontrol->value.integer.value; int change = 0; - if (chs & 1) + if (chs & 1) { change = snd_hda_codec_amp_update(codec, nid, 0, dir, idx, 0x7f, *valp); + valp++; + } if (chs & 2) change |= snd_hda_codec_amp_update(codec, nid, 1, dir, idx, - 0x7f, valp[1]); + 0x7f, *valp); return change; } @@ -796,12 +798,15 @@ int snd_hda_mixer_amp_switch_put(snd_kcontrol_t *kcontrol, snd_ctl_elem_value_t long *valp = ucontrol->value.integer.value; int change = 0; - if (chs & 1) + if (chs & 1) { change = snd_hda_codec_amp_update(codec, nid, 0, dir, idx, 0x80, *valp ? 0 : 0x80); + valp++; + } if (chs & 2) change |= snd_hda_codec_amp_update(codec, nid, 1, dir, idx, - 0x80, valp[1] ? 0 : 0x80); + 0x80, *valp ? 0 : 0x80); + return change; } -- cgit v1.2.3 From 42dfd0adab83c95890e562623264999914771763 Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Fri, 29 Jul 2005 14:18:39 +0200 Subject: [ALSA] via82xx - Add dxs entry for Acer Aspire 1524 WMLi VIA82xx driver Added the dxs entry for Acer Aspire 1524 WMLi. Signed-off-by: Takashi Iwai --- sound/pci/via82xx.c | 1 + 1 file changed, 1 insertion(+) diff --git a/sound/pci/via82xx.c b/sound/pci/via82xx.c index 4889600387c..6e1c29f5799 100644 --- a/sound/pci/via82xx.c +++ b/sound/pci/via82xx.c @@ -2153,6 +2153,7 @@ static int __devinit check_dxs_list(struct pci_dev *pci) { .subvendor = 0x1019, .subdevice = 0x0a81, .action = VIA_DXS_NO_VRA }, /* ECS K7VTA3 v8.0 */ { .subvendor = 0x1019, .subdevice = 0x0a85, .action = VIA_DXS_NO_VRA }, /* ECS L7VMM2 */ { .subvendor = 0x1025, .subdevice = 0x0033, .action = VIA_DXS_NO_VRA }, /* Acer Inspire 1353LM */ + { .subvendor = 0x1025, .subdevice = 0x0046, .action = VIA_DXS_SRC }, /* Acer Aspire 1524 WMLi */ { .subvendor = 0x1043, .subdevice = 0x8095, .action = VIA_DXS_NO_VRA }, /* ASUS A7V8X (FIXME: possibly VIA_DXS_ENABLE?)*/ { .subvendor = 0x1043, .subdevice = 0x80a1, .action = VIA_DXS_NO_VRA }, /* ASUS A7V8-X */ { .subvendor = 0x1043, .subdevice = 0x80b0, .action = VIA_DXS_NO_VRA }, /* ASUS A7V600 & K8V*/ -- cgit v1.2.3 From 67ed4161f60d76b3b27efc085b36357a6a90768c Mon Sep 17 00:00:00 2001 From: Clemens Ladisch Date: Fri, 29 Jul 2005 15:32:58 +0200 Subject: [ALSA] sound - fix .iface field of mixer control elements Documentation,CS46xx driver,EMU10K1/EMU10K2 driver,AD1848 driver SB16/AWE driver,CMIPCI driver,ENS1370/1+ driver,RME32 driver RME96 driver,ICE1712 driver,ICE1724 driver,KORG1212 driver RME HDSP driver,RME9652 driver This patch changes .iface to SNDRV_CTL_ELEM_IFACE_MIXER whre _PCM or _HWDEP was used in controls that are not associated with a specific PCM (sub)stream or hwdep device, and changes some controls that got inconsitent .iface values due to copy+paste errors. Furthermore, it makes sure that all control that do use _PCM or _HWDEP use the correct number in the .device field. Signed-off-by: Clemens Ladisch --- .../sound/alsa/DocBook/writing-an-alsa-driver.tmpl | 15 ++++-- include/sound/cs46xx.h | 2 +- include/sound/emu10k1.h | 2 +- sound/isa/ad1848/ad1848_lib.c | 1 + sound/isa/sb/sb16_main.c | 2 +- sound/pci/cmipci.c | 2 +- sound/pci/cs46xx/cs46xx.c | 2 +- sound/pci/cs46xx/cs46xx_lib.c | 4 +- sound/pci/emu10k1/emu10k1.c | 2 +- sound/pci/emu10k1/emumixer.c | 15 ++++-- sound/pci/emu10k1/emupcm.c | 7 ++- sound/pci/ens1370.c | 6 +-- sound/pci/ice1712/delta.c | 10 ++-- sound/pci/ice1712/ice1712.c | 4 +- sound/pci/ice1712/ice1724.c | 4 +- sound/pci/korg1212/korg1212.c | 4 +- sound/pci/rme32.c | 4 +- sound/pci/rme96.c | 4 +- sound/pci/rme9652/hdsp.c | 55 +++++++++++----------- sound/pci/rme9652/hdspm.c | 27 ++++++----- sound/pci/rme9652/rme9652.c | 24 +++++----- 21 files changed, 109 insertions(+), 87 deletions(-) diff --git a/Documentation/sound/alsa/DocBook/writing-an-alsa-driver.tmpl b/Documentation/sound/alsa/DocBook/writing-an-alsa-driver.tmpl index db0b7d2dc47..0475478c248 100644 --- a/Documentation/sound/alsa/DocBook/writing-an-alsa-driver.tmpl +++ b/Documentation/sound/alsa/DocBook/writing-an-alsa-driver.tmpl @@ -3422,10 +3422,17 @@ struct _snd_pcm_runtime { The iface field specifies the type of - the control, - SNDRV_CTL_ELEM_IFACE_XXX. There are - MIXER, PCM, - CARD, etc. + the control, SNDRV_CTL_ELEM_IFACE_XXX, which + is usually MIXER. + Use CARD for global controls that are not + logically part of the mixer. + If the control is closely associated with some specific device on + the sound card, use HWDEP, + PCM, RAWMIDI, + TIMER, or SEQUENCER, and + specify the device number with the + device and + subdevice fields. diff --git a/include/sound/cs46xx.h b/include/sound/cs46xx.h index 182dd276ee7..9b94510eda6 100644 --- a/include/sound/cs46xx.h +++ b/include/sound/cs46xx.h @@ -1748,7 +1748,7 @@ int snd_cs46xx_pcm(cs46xx_t *chip, int device, snd_pcm_t **rpcm); int snd_cs46xx_pcm_rear(cs46xx_t *chip, int device, snd_pcm_t **rpcm); int snd_cs46xx_pcm_iec958(cs46xx_t *chip, int device, snd_pcm_t **rpcm); int snd_cs46xx_pcm_center_lfe(cs46xx_t *chip, int device, snd_pcm_t **rpcm); -int snd_cs46xx_mixer(cs46xx_t *chip); +int snd_cs46xx_mixer(cs46xx_t *chip, int spdif_device); int snd_cs46xx_midi(cs46xx_t *chip, int device, snd_rawmidi_t **rmidi); int snd_cs46xx_start_dsp(cs46xx_t *chip); int snd_cs46xx_gameport(cs46xx_t *chip); diff --git a/include/sound/emu10k1.h b/include/sound/emu10k1.h index c2ef3f02368..4e3993dfcef 100644 --- a/include/sound/emu10k1.h +++ b/include/sound/emu10k1.h @@ -1178,7 +1178,7 @@ int snd_p16v_free(emu10k1_t * emu); int snd_p16v_mixer(emu10k1_t * emu); int snd_emu10k1_pcm_multi(emu10k1_t * emu, int device, snd_pcm_t ** rpcm); int snd_emu10k1_fx8010_pcm(emu10k1_t * emu, int device, snd_pcm_t ** rpcm); -int snd_emu10k1_mixer(emu10k1_t * emu); +int snd_emu10k1_mixer(emu10k1_t * emu, int pcm_device, int multi_device); int snd_emu10k1_timer(emu10k1_t * emu, int device); int snd_emu10k1_fx8010_new(emu10k1_t *emu, int device, snd_hwdep_t ** rhwdep); diff --git a/sound/isa/ad1848/ad1848_lib.c b/sound/isa/ad1848/ad1848_lib.c index 8fb3db103e4..bc642dc9454 100644 --- a/sound/isa/ad1848/ad1848_lib.c +++ b/sound/isa/ad1848/ad1848_lib.c @@ -1196,6 +1196,7 @@ int snd_ad1848_add_ctl(ad1848_t *chip, const char *name, int index, int type, un .put = snd_ad1848_put_double, }, [AD1848_MIX_CAPTURE] = { + .iface = SNDRV_CTL_ELEM_IFACE_MIXER, .info = snd_ad1848_info_mux, .get = snd_ad1848_get_mux, .put = snd_ad1848_put_mux, diff --git a/sound/isa/sb/sb16_main.c b/sound/isa/sb/sb16_main.c index a6a0fa51626..a99e642a68b 100644 --- a/sound/isa/sb/sb16_main.c +++ b/sound/isa/sb/sb16_main.c @@ -729,7 +729,7 @@ static int snd_sb16_dma_control_put(snd_kcontrol_t * kcontrol, snd_ctl_elem_valu } static snd_kcontrol_new_t snd_sb16_dma_control = { - .iface = SNDRV_CTL_ELEM_IFACE_PCM, + .iface = SNDRV_CTL_ELEM_IFACE_CARD, .name = "16-bit DMA Allocation", .info = snd_sb16_dma_control_info, .get = snd_sb16_dma_control_get, diff --git a/sound/pci/cmipci.c b/sound/pci/cmipci.c index f5a4ac1ceef..b098b51099c 100644 --- a/sound/pci/cmipci.c +++ b/sound/pci/cmipci.c @@ -1029,7 +1029,7 @@ static int snd_cmipci_spdif_mask_get(snd_kcontrol_t * kcontrol, static snd_kcontrol_new_t snd_cmipci_spdif_mask __devinitdata = { .access = SNDRV_CTL_ELEM_ACCESS_READ, - .iface = SNDRV_CTL_ELEM_IFACE_MIXER, + .iface = SNDRV_CTL_ELEM_IFACE_PCM, .name = SNDRV_CTL_NAME_IEC958("",PLAYBACK,CON_MASK), .info = snd_cmipci_spdif_mask_info, .get = snd_cmipci_spdif_mask_get, diff --git a/sound/pci/cs46xx/cs46xx.c b/sound/pci/cs46xx/cs46xx.c index db212ecd792..b9fff4ee6f9 100644 --- a/sound/pci/cs46xx/cs46xx.c +++ b/sound/pci/cs46xx/cs46xx.c @@ -113,7 +113,7 @@ static int __devinit snd_card_cs46xx_probe(struct pci_dev *pci, return err; } #endif - if ((err = snd_cs46xx_mixer(chip)) < 0) { + if ((err = snd_cs46xx_mixer(chip, 2)) < 0) { snd_card_free(card); return err; } diff --git a/sound/pci/cs46xx/cs46xx_lib.c b/sound/pci/cs46xx/cs46xx_lib.c index ff28af1f658..1546aec02ea 100644 --- a/sound/pci/cs46xx/cs46xx_lib.c +++ b/sound/pci/cs46xx/cs46xx_lib.c @@ -2440,7 +2440,7 @@ static int __devinit cs46xx_detect_codec(cs46xx_t *chip, int codec) return -ENXIO; } -int __devinit snd_cs46xx_mixer(cs46xx_t *chip) +int __devinit snd_cs46xx_mixer(cs46xx_t *chip, int spdif_device) { snd_card_t *card = chip->card; snd_ctl_elem_id_t id; @@ -2476,6 +2476,8 @@ int __devinit snd_cs46xx_mixer(cs46xx_t *chip) for (idx = 0; idx < ARRAY_SIZE(snd_cs46xx_controls); idx++) { snd_kcontrol_t *kctl; kctl = snd_ctl_new1(&snd_cs46xx_controls[idx], chip); + if (kctl && kctl->id.iface == SNDRV_CTL_ELEM_IFACE_PCM) + kctl->id.device = spdif_device; if ((err = snd_ctl_add(card, kctl)) < 0) return err; } diff --git a/sound/pci/emu10k1/emu10k1.c b/sound/pci/emu10k1/emu10k1.c index b17142cabea..fc377c4b666 100644 --- a/sound/pci/emu10k1/emu10k1.c +++ b/sound/pci/emu10k1/emu10k1.c @@ -149,7 +149,7 @@ static int __devinit snd_card_emu10k1_probe(struct pci_dev *pci, } } - if ((err = snd_emu10k1_mixer(emu)) < 0) { + if ((err = snd_emu10k1_mixer(emu, 0, 3)) < 0) { snd_card_free(card); return err; } diff --git a/sound/pci/emu10k1/emumixer.c b/sound/pci/emu10k1/emumixer.c index 6be82c5fe13..279edaeb066 100644 --- a/sound/pci/emu10k1/emumixer.c +++ b/sound/pci/emu10k1/emumixer.c @@ -295,7 +295,7 @@ static int snd_emu10k1_send_routing_put(snd_kcontrol_t * kcontrol, static snd_kcontrol_new_t snd_emu10k1_send_routing_control = { .access = SNDRV_CTL_ELEM_ACCESS_READWRITE | SNDRV_CTL_ELEM_ACCESS_INACTIVE, - .iface = SNDRV_CTL_ELEM_IFACE_MIXER, + .iface = SNDRV_CTL_ELEM_IFACE_PCM, .name = "EMU10K1 PCM Send Routing", .count = 32, .info = snd_emu10k1_send_routing_info, @@ -364,7 +364,7 @@ static int snd_emu10k1_send_volume_put(snd_kcontrol_t * kcontrol, static snd_kcontrol_new_t snd_emu10k1_send_volume_control = { .access = SNDRV_CTL_ELEM_ACCESS_READWRITE | SNDRV_CTL_ELEM_ACCESS_INACTIVE, - .iface = SNDRV_CTL_ELEM_IFACE_MIXER, + .iface = SNDRV_CTL_ELEM_IFACE_PCM, .name = "EMU10K1 PCM Send Volume", .count = 32, .info = snd_emu10k1_send_volume_info, @@ -427,7 +427,7 @@ static int snd_emu10k1_attn_put(snd_kcontrol_t * kcontrol, static snd_kcontrol_new_t snd_emu10k1_attn_control = { .access = SNDRV_CTL_ELEM_ACCESS_READWRITE | SNDRV_CTL_ELEM_ACCESS_INACTIVE, - .iface = SNDRV_CTL_ELEM_IFACE_MIXER, + .iface = SNDRV_CTL_ELEM_IFACE_PCM, .name = "EMU10K1 PCM Volume", .count = 32, .info = snd_emu10k1_attn_info, @@ -737,7 +737,8 @@ static int rename_ctl(snd_card_t *card, const char *src, const char *dst) return -ENOENT; } -int __devinit snd_emu10k1_mixer(emu10k1_t *emu) +int __devinit snd_emu10k1_mixer(emu10k1_t *emu, + int pcm_device, int multi_device) { int err, pcm; snd_kcontrol_t *kctl; @@ -852,29 +853,35 @@ int __devinit snd_emu10k1_mixer(emu10k1_t *emu) if ((kctl = emu->ctl_send_routing = snd_ctl_new1(&snd_emu10k1_send_routing_control, emu)) == NULL) return -ENOMEM; + kctl->id.device = pcm_device; if ((err = snd_ctl_add(card, kctl))) return err; if ((kctl = emu->ctl_send_volume = snd_ctl_new1(&snd_emu10k1_send_volume_control, emu)) == NULL) return -ENOMEM; + kctl->id.device = pcm_device; if ((err = snd_ctl_add(card, kctl))) return err; if ((kctl = emu->ctl_attn = snd_ctl_new1(&snd_emu10k1_attn_control, emu)) == NULL) return -ENOMEM; + kctl->id.device = pcm_device; if ((err = snd_ctl_add(card, kctl))) return err; if ((kctl = emu->ctl_efx_send_routing = snd_ctl_new1(&snd_emu10k1_efx_send_routing_control, emu)) == NULL) return -ENOMEM; + kctl->id.device = multi_device; if ((err = snd_ctl_add(card, kctl))) return err; if ((kctl = emu->ctl_efx_send_volume = snd_ctl_new1(&snd_emu10k1_efx_send_volume_control, emu)) == NULL) return -ENOMEM; + kctl->id.device = multi_device; if ((err = snd_ctl_add(card, kctl))) return err; if ((kctl = emu->ctl_efx_attn = snd_ctl_new1(&snd_emu10k1_efx_attn_control, emu)) == NULL) return -ENOMEM; + kctl->id.device = multi_device; if ((err = snd_ctl_add(card, kctl))) return err; diff --git a/sound/pci/emu10k1/emupcm.c b/sound/pci/emu10k1/emupcm.c index 520b99af5f5..9c35f6dde1b 100644 --- a/sound/pci/emu10k1/emupcm.c +++ b/sound/pci/emu10k1/emupcm.c @@ -1682,6 +1682,7 @@ static void snd_emu10k1_pcm_efx_free(snd_pcm_t *pcm) int __devinit snd_emu10k1_pcm_efx(emu10k1_t * emu, int device, snd_pcm_t ** rpcm) { snd_pcm_t *pcm; + snd_kcontrol_t *kctl; int err; if (rpcm) @@ -1714,7 +1715,11 @@ int __devinit snd_emu10k1_pcm_efx(emu10k1_t * emu, int device, snd_pcm_t ** rpcm emu->efx_voices_mask[0] = 0xffff0000; emu->efx_voices_mask[1] = 0; } - snd_ctl_add(emu->card, snd_ctl_new1(&snd_emu10k1_pcm_efx_voices_mask, emu)); + kctl = snd_ctl_new1(&snd_emu10k1_pcm_efx_voices_mask, emu); + if (!kctl) + return -ENOMEM; + kctl->id.device = device; + snd_ctl_add(emu->card, kctl); snd_pcm_lib_preallocate_pages_for_all(pcm, SNDRV_DMA_TYPE_DEV, snd_dma_pci_data(emu->pci), 64*1024, 64*1024); diff --git a/sound/pci/ens1370.c b/sound/pci/ens1370.c index 78a81f3912a..0c64e65bee9 100644 --- a/sound/pci/ens1370.c +++ b/sound/pci/ens1370.c @@ -1446,7 +1446,7 @@ static int snd_es1371_spdif_put(snd_kcontrol_t * kcontrol, snd_ctl_elem_value_t static snd_kcontrol_new_t snd_es1371_mixer_spdif[] __devinitdata = { ES1371_SPDIF("IEC958 Playback Switch"), { - .iface = SNDRV_CTL_ELEM_IFACE_PCM, + .iface = SNDRV_CTL_ELEM_IFACE_MIXER, .name = SNDRV_CTL_NAME_IEC958("",PLAYBACK,DEFAULT), .info = snd_ens1373_spdif_info, .get = snd_ens1373_spdif_default_get, @@ -1454,13 +1454,13 @@ static snd_kcontrol_new_t snd_es1371_mixer_spdif[] __devinitdata = { }, { .access = SNDRV_CTL_ELEM_ACCESS_READ, - .iface = SNDRV_CTL_ELEM_IFACE_PCM, + .iface = SNDRV_CTL_ELEM_IFACE_MIXER, .name = SNDRV_CTL_NAME_IEC958("",PLAYBACK,MASK), .info = snd_ens1373_spdif_info, .get = snd_ens1373_spdif_mask_get }, { - .iface = SNDRV_CTL_ELEM_IFACE_PCM, + .iface = SNDRV_CTL_ELEM_IFACE_MIXER, .name = SNDRV_CTL_NAME_IEC958("",PLAYBACK,PCM_STREAM), .info = snd_ens1373_spdif_info, .get = snd_ens1373_spdif_stream_get, diff --git a/sound/pci/ice1712/delta.c b/sound/pci/ice1712/delta.c index eb20f73be61..39fbe662965 100644 --- a/sound/pci/ice1712/delta.c +++ b/sound/pci/ice1712/delta.c @@ -618,15 +618,15 @@ static int __devinit snd_ice1712_delta_init(ice1712_t *ice) */ static snd_kcontrol_new_t snd_ice1712_delta1010_wordclock_select __devinitdata = -ICE1712_GPIO(SNDRV_CTL_ELEM_IFACE_PCM, "Word Clock Sync", 0, ICE1712_DELTA_WORD_CLOCK_SELECT, 1, 0); +ICE1712_GPIO(SNDRV_CTL_ELEM_IFACE_MIXER, "Word Clock Sync", 0, ICE1712_DELTA_WORD_CLOCK_SELECT, 1, 0); static snd_kcontrol_new_t snd_ice1712_delta1010lt_wordclock_select __devinitdata = -ICE1712_GPIO(SNDRV_CTL_ELEM_IFACE_PCM, "Word Clock Sync", 0, ICE1712_DELTA_1010LT_WORDCLOCK, 1, 0); +ICE1712_GPIO(SNDRV_CTL_ELEM_IFACE_MIXER, "Word Clock Sync", 0, ICE1712_DELTA_1010LT_WORDCLOCK, 1, 0); static snd_kcontrol_new_t snd_ice1712_delta1010_wordclock_status __devinitdata = -ICE1712_GPIO(SNDRV_CTL_ELEM_IFACE_PCM, "Word Clock Status", 0, ICE1712_DELTA_WORD_CLOCK_STATUS, 1, SNDRV_CTL_ELEM_ACCESS_READ | SNDRV_CTL_ELEM_ACCESS_VOLATILE); +ICE1712_GPIO(SNDRV_CTL_ELEM_IFACE_MIXER, "Word Clock Status", 0, ICE1712_DELTA_WORD_CLOCK_STATUS, 1, SNDRV_CTL_ELEM_ACCESS_READ | SNDRV_CTL_ELEM_ACCESS_VOLATILE); static snd_kcontrol_new_t snd_ice1712_deltadio2496_spdif_in_select __devinitdata = -ICE1712_GPIO(SNDRV_CTL_ELEM_IFACE_PCM, "IEC958 Input Optical", 0, ICE1712_DELTA_SPDIF_INPUT_SELECT, 0, 0); +ICE1712_GPIO(SNDRV_CTL_ELEM_IFACE_MIXER, "IEC958 Input Optical", 0, ICE1712_DELTA_SPDIF_INPUT_SELECT, 0, 0); static snd_kcontrol_new_t snd_ice1712_delta_spdif_in_status __devinitdata = -ICE1712_GPIO(SNDRV_CTL_ELEM_IFACE_PCM, "Delta IEC958 Input Status", 0, ICE1712_DELTA_SPDIF_IN_STAT, 1, SNDRV_CTL_ELEM_ACCESS_READ | SNDRV_CTL_ELEM_ACCESS_VOLATILE); +ICE1712_GPIO(SNDRV_CTL_ELEM_IFACE_MIXER, "Delta IEC958 Input Status", 0, ICE1712_DELTA_SPDIF_IN_STAT, 1, SNDRV_CTL_ELEM_ACCESS_READ | SNDRV_CTL_ELEM_ACCESS_VOLATILE); static int __devinit snd_ice1712_delta_add_controls(ice1712_t *ice) diff --git a/sound/pci/ice1712/ice1712.c b/sound/pci/ice1712/ice1712.c index a2545a5b26c..d51c72b721e 100644 --- a/sound/pci/ice1712/ice1712.c +++ b/sound/pci/ice1712/ice1712.c @@ -1715,7 +1715,7 @@ static int snd_ice1712_spdif_maskp_get(snd_kcontrol_t * kcontrol, static snd_kcontrol_new_t snd_ice1712_spdif_maskc __devinitdata = { .access = SNDRV_CTL_ELEM_ACCESS_READ, - .iface = SNDRV_CTL_ELEM_IFACE_MIXER, + .iface = SNDRV_CTL_ELEM_IFACE_PCM, .name = SNDRV_CTL_NAME_IEC958("",PLAYBACK,CON_MASK), .info = snd_ice1712_spdif_info, .get = snd_ice1712_spdif_maskc_get, @@ -1724,7 +1724,7 @@ static snd_kcontrol_new_t snd_ice1712_spdif_maskc __devinitdata = static snd_kcontrol_new_t snd_ice1712_spdif_maskp __devinitdata = { .access = SNDRV_CTL_ELEM_ACCESS_READ, - .iface = SNDRV_CTL_ELEM_IFACE_MIXER, + .iface = SNDRV_CTL_ELEM_IFACE_PCM, .name = SNDRV_CTL_NAME_IEC958("",PLAYBACK,PRO_MASK), .info = snd_ice1712_spdif_info, .get = snd_ice1712_spdif_maskp_get, diff --git a/sound/pci/ice1712/ice1724.c b/sound/pci/ice1712/ice1724.c index 79b5f12e06f..e819b9ffc26 100644 --- a/sound/pci/ice1712/ice1724.c +++ b/sound/pci/ice1712/ice1724.c @@ -1414,7 +1414,7 @@ static int snd_vt1724_spdif_maskp_get(snd_kcontrol_t * kcontrol, static snd_kcontrol_new_t snd_vt1724_spdif_maskc __devinitdata = { .access = SNDRV_CTL_ELEM_ACCESS_READ, - .iface = SNDRV_CTL_ELEM_IFACE_MIXER, + .iface = SNDRV_CTL_ELEM_IFACE_PCM, .name = SNDRV_CTL_NAME_IEC958("",PLAYBACK,CON_MASK), .info = snd_vt1724_spdif_info, .get = snd_vt1724_spdif_maskc_get, @@ -1423,7 +1423,7 @@ static snd_kcontrol_new_t snd_vt1724_spdif_maskc __devinitdata = static snd_kcontrol_new_t snd_vt1724_spdif_maskp __devinitdata = { .access = SNDRV_CTL_ELEM_ACCESS_READ, - .iface = SNDRV_CTL_ELEM_IFACE_MIXER, + .iface = SNDRV_CTL_ELEM_IFACE_PCM, .name = SNDRV_CTL_NAME_IEC958("",PLAYBACK,PRO_MASK), .info = snd_vt1724_spdif_info, .get = snd_vt1724_spdif_maskp_get, diff --git a/sound/pci/korg1212/korg1212.c b/sound/pci/korg1212/korg1212.c index 79d8eda54f0..d2aa9c82d41 100644 --- a/sound/pci/korg1212/korg1212.c +++ b/sound/pci/korg1212/korg1212.c @@ -2067,7 +2067,7 @@ static int snd_korg1212_control_sync_put(snd_kcontrol_t * kcontrol, snd_ctl_elem }, \ { \ .access = SNDRV_CTL_ELEM_ACCESS_READ | SNDRV_CTL_ELEM_ACCESS_WRITE, \ - .iface = SNDRV_CTL_ELEM_IFACE_PCM, \ + .iface = SNDRV_CTL_ELEM_IFACE_MIXER, \ .name = c_name " Monitor Phase Invert", \ .info = snd_korg1212_control_phase_info, \ .get = snd_korg1212_control_phase_get, \ @@ -2082,7 +2082,7 @@ static snd_kcontrol_new_t snd_korg1212_controls[] = { MON_MIXER(4, "ADAT-5"), MON_MIXER(5, "ADAT-6"), MON_MIXER(6, "ADAT-7"), MON_MIXER(7, "ADAT-8"), { .access = SNDRV_CTL_ELEM_ACCESS_READ | SNDRV_CTL_ELEM_ACCESS_WRITE, - .iface = SNDRV_CTL_ELEM_IFACE_PCM, + .iface = SNDRV_CTL_ELEM_IFACE_MIXER, .name = "Sync Source", .info = snd_korg1212_control_sync_info, .get = snd_korg1212_control_sync_get, diff --git a/sound/pci/rme32.c b/sound/pci/rme32.c index b7b554df670..456be39e8e4 100644 --- a/sound/pci/rme32.c +++ b/sound/pci/rme32.c @@ -1900,7 +1900,7 @@ static snd_kcontrol_new_t snd_rme32_controls[] = { }, { .access = SNDRV_CTL_ELEM_ACCESS_READ, - .iface = SNDRV_CTL_ELEM_IFACE_MIXER, + .iface = SNDRV_CTL_ELEM_IFACE_PCM, .name = SNDRV_CTL_NAME_IEC958("", PLAYBACK, CON_MASK), .info = snd_rme32_control_spdif_mask_info, .get = snd_rme32_control_spdif_mask_get, @@ -1908,7 +1908,7 @@ static snd_kcontrol_new_t snd_rme32_controls[] = { }, { .access = SNDRV_CTL_ELEM_ACCESS_READ, - .iface = SNDRV_CTL_ELEM_IFACE_MIXER, + .iface = SNDRV_CTL_ELEM_IFACE_PCM, .name = SNDRV_CTL_NAME_IEC958("", PLAYBACK, PRO_MASK), .info = snd_rme32_control_spdif_mask_info, .get = snd_rme32_control_spdif_mask_get, diff --git a/sound/pci/rme96.c b/sound/pci/rme96.c index 10c4f45a913..9645e9004a4 100644 --- a/sound/pci/rme96.c +++ b/sound/pci/rme96.c @@ -2266,7 +2266,7 @@ static snd_kcontrol_new_t snd_rme96_controls[] = { }, { .access = SNDRV_CTL_ELEM_ACCESS_READ, - .iface = SNDRV_CTL_ELEM_IFACE_MIXER, + .iface = SNDRV_CTL_ELEM_IFACE_PCM, .name = SNDRV_CTL_NAME_IEC958("",PLAYBACK,CON_MASK), .info = snd_rme96_control_spdif_mask_info, .get = snd_rme96_control_spdif_mask_get, @@ -2276,7 +2276,7 @@ static snd_kcontrol_new_t snd_rme96_controls[] = { }, { .access = SNDRV_CTL_ELEM_ACCESS_READ, - .iface = SNDRV_CTL_ELEM_IFACE_MIXER, + .iface = SNDRV_CTL_ELEM_IFACE_PCM, .name = SNDRV_CTL_NAME_IEC958("",PLAYBACK,PRO_MASK), .info = snd_rme96_control_spdif_mask_info, .get = snd_rme96_control_spdif_mask_get, diff --git a/sound/pci/rme9652/hdsp.c b/sound/pci/rme9652/hdsp.c index 796621de500..60eef845a07 100644 --- a/sound/pci/rme9652/hdsp.c +++ b/sound/pci/rme9652/hdsp.c @@ -1524,7 +1524,7 @@ static int snd_hdsp_control_spdif_mask_get(snd_kcontrol_t * kcontrol, snd_ctl_el } #define HDSP_SPDIF_IN(xname, xindex) \ -{ .iface = SNDRV_CTL_ELEM_IFACE_PCM, \ +{ .iface = SNDRV_CTL_ELEM_IFACE_MIXER, \ .name = xname, \ .index = xindex, \ .info = snd_hdsp_info_spdif_in, \ @@ -1584,7 +1584,7 @@ static int snd_hdsp_put_spdif_in(snd_kcontrol_t * kcontrol, snd_ctl_elem_value_t } #define HDSP_SPDIF_OUT(xname, xindex) \ -{ .iface = SNDRV_CTL_ELEM_IFACE_HWDEP, .name = xname, .index = xindex, \ +{ .iface = SNDRV_CTL_ELEM_IFACE_MIXER, .name = xname, .index = xindex, \ .info = snd_hdsp_info_spdif_bits, \ .get = snd_hdsp_get_spdif_out, .put = snd_hdsp_put_spdif_out } @@ -1638,7 +1638,7 @@ static int snd_hdsp_put_spdif_out(snd_kcontrol_t * kcontrol, snd_ctl_elem_value_ } #define HDSP_SPDIF_PROFESSIONAL(xname, xindex) \ -{ .iface = SNDRV_CTL_ELEM_IFACE_HWDEP, .name = xname, .index = xindex, \ +{ .iface = SNDRV_CTL_ELEM_IFACE_MIXER, .name = xname, .index = xindex, \ .info = snd_hdsp_info_spdif_bits, \ .get = snd_hdsp_get_spdif_professional, .put = snd_hdsp_put_spdif_professional } @@ -1683,7 +1683,7 @@ static int snd_hdsp_put_spdif_professional(snd_kcontrol_t * kcontrol, snd_ctl_el } #define HDSP_SPDIF_EMPHASIS(xname, xindex) \ -{ .iface = SNDRV_CTL_ELEM_IFACE_HWDEP, .name = xname, .index = xindex, \ +{ .iface = SNDRV_CTL_ELEM_IFACE_MIXER, .name = xname, .index = xindex, \ .info = snd_hdsp_info_spdif_bits, \ .get = snd_hdsp_get_spdif_emphasis, .put = snd_hdsp_put_spdif_emphasis } @@ -1728,7 +1728,7 @@ static int snd_hdsp_put_spdif_emphasis(snd_kcontrol_t * kcontrol, snd_ctl_elem_v } #define HDSP_SPDIF_NON_AUDIO(xname, xindex) \ -{ .iface = SNDRV_CTL_ELEM_IFACE_HWDEP, .name = xname, .index = xindex, \ +{ .iface = SNDRV_CTL_ELEM_IFACE_MIXER, .name = xname, .index = xindex, \ .info = snd_hdsp_info_spdif_bits, \ .get = snd_hdsp_get_spdif_nonaudio, .put = snd_hdsp_put_spdif_nonaudio } @@ -1773,7 +1773,7 @@ static int snd_hdsp_put_spdif_nonaudio(snd_kcontrol_t * kcontrol, snd_ctl_elem_v } #define HDSP_SPDIF_SAMPLE_RATE(xname, xindex) \ -{ .iface = SNDRV_CTL_ELEM_IFACE_HWDEP, \ +{ .iface = SNDRV_CTL_ELEM_IFACE_MIXER, \ .name = xname, \ .index = xindex, \ .access = SNDRV_CTL_ELEM_ACCESS_READ, \ @@ -1834,7 +1834,7 @@ static int snd_hdsp_get_spdif_sample_rate(snd_kcontrol_t * kcontrol, snd_ctl_ele } #define HDSP_SYSTEM_SAMPLE_RATE(xname, xindex) \ -{ .iface = SNDRV_CTL_ELEM_IFACE_HWDEP, \ +{ .iface = SNDRV_CTL_ELEM_IFACE_MIXER, \ .name = xname, \ .index = xindex, \ .access = SNDRV_CTL_ELEM_ACCESS_READ, \ @@ -1858,7 +1858,7 @@ static int snd_hdsp_get_system_sample_rate(snd_kcontrol_t * kcontrol, snd_ctl_el } #define HDSP_AUTOSYNC_SAMPLE_RATE(xname, xindex) \ -{ .iface = SNDRV_CTL_ELEM_IFACE_PCM, \ +{ .iface = SNDRV_CTL_ELEM_IFACE_MIXER, \ .name = xname, \ .index = xindex, \ .access = SNDRV_CTL_ELEM_ACCESS_READ, \ @@ -1918,7 +1918,7 @@ static int snd_hdsp_get_autosync_sample_rate(snd_kcontrol_t * kcontrol, snd_ctl_ } #define HDSP_SYSTEM_CLOCK_MODE(xname, xindex) \ -{ .iface = SNDRV_CTL_ELEM_IFACE_HWDEP, \ +{ .iface = SNDRV_CTL_ELEM_IFACE_MIXER, \ .name = xname, \ .index = xindex, \ .access = SNDRV_CTL_ELEM_ACCESS_READ, \ @@ -1958,7 +1958,7 @@ static int snd_hdsp_get_system_clock_mode(snd_kcontrol_t * kcontrol, snd_ctl_ele } #define HDSP_CLOCK_SOURCE(xname, xindex) \ -{ .iface = SNDRV_CTL_ELEM_IFACE_PCM, \ +{ .iface = SNDRV_CTL_ELEM_IFACE_MIXER, \ .name = xname, \ .index = xindex, \ .info = snd_hdsp_info_clock_source, \ @@ -2124,7 +2124,7 @@ static int snd_hdsp_put_clock_source_lock(snd_kcontrol_t * kcontrol, snd_ctl_ele } #define HDSP_DA_GAIN(xname, xindex) \ -{ .iface = SNDRV_CTL_ELEM_IFACE_HWDEP, \ +{ .iface = SNDRV_CTL_ELEM_IFACE_MIXER, \ .name = xname, \ .index = xindex, \ .info = snd_hdsp_info_da_gain, \ @@ -2210,7 +2210,7 @@ static int snd_hdsp_put_da_gain(snd_kcontrol_t * kcontrol, snd_ctl_elem_value_t } #define HDSP_AD_GAIN(xname, xindex) \ -{ .iface = SNDRV_CTL_ELEM_IFACE_HWDEP, \ +{ .iface = SNDRV_CTL_ELEM_IFACE_MIXER, \ .name = xname, \ .index = xindex, \ .info = snd_hdsp_info_ad_gain, \ @@ -2296,7 +2296,7 @@ static int snd_hdsp_put_ad_gain(snd_kcontrol_t * kcontrol, snd_ctl_elem_value_t } #define HDSP_PHONE_GAIN(xname, xindex) \ -{ .iface = SNDRV_CTL_ELEM_IFACE_HWDEP, \ +{ .iface = SNDRV_CTL_ELEM_IFACE_MIXER, \ .name = xname, \ .index = xindex, \ .info = snd_hdsp_info_phone_gain, \ @@ -2382,7 +2382,7 @@ static int snd_hdsp_put_phone_gain(snd_kcontrol_t * kcontrol, snd_ctl_elem_value } #define HDSP_XLR_BREAKOUT_CABLE(xname, xindex) \ -{ .iface = SNDRV_CTL_ELEM_IFACE_HWDEP, \ +{ .iface = SNDRV_CTL_ELEM_IFACE_MIXER, \ .name = xname, \ .index = xindex, \ .info = snd_hdsp_info_xlr_breakout_cable, \ @@ -2447,7 +2447,7 @@ static int snd_hdsp_put_xlr_breakout_cable(snd_kcontrol_t * kcontrol, snd_ctl_el Switching this on desactivates external ADAT */ #define HDSP_AEB(xname, xindex) \ -{ .iface = SNDRV_CTL_ELEM_IFACE_HWDEP, \ +{ .iface = SNDRV_CTL_ELEM_IFACE_MIXER, \ .name = xname, \ .index = xindex, \ .info = snd_hdsp_info_aeb, \ @@ -2508,7 +2508,7 @@ static int snd_hdsp_put_aeb(snd_kcontrol_t * kcontrol, snd_ctl_elem_value_t * uc } #define HDSP_PREF_SYNC_REF(xname, xindex) \ -{ .iface = SNDRV_CTL_ELEM_IFACE_HWDEP, \ +{ .iface = SNDRV_CTL_ELEM_IFACE_MIXER, \ .name = xname, \ .index = xindex, \ .info = snd_hdsp_info_pref_sync_ref, \ @@ -2641,7 +2641,7 @@ static int snd_hdsp_put_pref_sync_ref(snd_kcontrol_t * kcontrol, snd_ctl_elem_va } #define HDSP_AUTOSYNC_REF(xname, xindex) \ -{ .iface = SNDRV_CTL_ELEM_IFACE_HWDEP, \ +{ .iface = SNDRV_CTL_ELEM_IFACE_MIXER, \ .name = xname, \ .index = xindex, \ .access = SNDRV_CTL_ELEM_ACCESS_READ, \ @@ -2697,7 +2697,7 @@ static int snd_hdsp_get_autosync_ref(snd_kcontrol_t * kcontrol, snd_ctl_elem_val } #define HDSP_LINE_OUT(xname, xindex) \ -{ .iface = SNDRV_CTL_ELEM_IFACE_HWDEP, \ +{ .iface = SNDRV_CTL_ELEM_IFACE_MIXER, \ .name = xname, \ .index = xindex, \ .info = snd_hdsp_info_line_out, \ @@ -2757,7 +2757,7 @@ static int snd_hdsp_put_line_out(snd_kcontrol_t * kcontrol, snd_ctl_elem_value_t } #define HDSP_PRECISE_POINTER(xname, xindex) \ -{ .iface = SNDRV_CTL_ELEM_IFACE_HWDEP, \ +{ .iface = SNDRV_CTL_ELEM_IFACE_CARD, \ .name = xname, \ .index = xindex, \ .info = snd_hdsp_info_precise_pointer, \ @@ -2811,7 +2811,7 @@ static int snd_hdsp_put_precise_pointer(snd_kcontrol_t * kcontrol, snd_ctl_elem_ } #define HDSP_USE_MIDI_TASKLET(xname, xindex) \ -{ .iface = SNDRV_CTL_ELEM_IFACE_HWDEP, \ +{ .iface = SNDRV_CTL_ELEM_IFACE_CARD, \ .name = xname, \ .index = xindex, \ .info = snd_hdsp_info_use_midi_tasklet, \ @@ -2868,6 +2868,7 @@ static int snd_hdsp_put_use_midi_tasklet(snd_kcontrol_t * kcontrol, snd_ctl_elem { .iface = SNDRV_CTL_ELEM_IFACE_HWDEP, \ .name = xname, \ .index = xindex, \ + .device = 0, \ .access = SNDRV_CTL_ELEM_ACCESS_READWRITE | \ SNDRV_CTL_ELEM_ACCESS_VOLATILE, \ .info = snd_hdsp_info_mixer, \ @@ -2939,7 +2940,7 @@ static int snd_hdsp_put_mixer(snd_kcontrol_t * kcontrol, snd_ctl_elem_value_t * } #define HDSP_WC_SYNC_CHECK(xname, xindex) \ -{ .iface = SNDRV_CTL_ELEM_IFACE_HWDEP, \ +{ .iface = SNDRV_CTL_ELEM_IFACE_MIXER, \ .name = xname, \ .index = xindex, \ .access = SNDRV_CTL_ELEM_ACCESS_READ | SNDRV_CTL_ELEM_ACCESS_VOLATILE, \ @@ -2983,7 +2984,7 @@ static int snd_hdsp_get_wc_sync_check(snd_kcontrol_t * kcontrol, snd_ctl_elem_va } #define HDSP_SPDIF_SYNC_CHECK(xname, xindex) \ -{ .iface = SNDRV_CTL_ELEM_IFACE_HWDEP, \ +{ .iface = SNDRV_CTL_ELEM_IFACE_MIXER, \ .name = xname, \ .index = xindex, \ .access = SNDRV_CTL_ELEM_ACCESS_READ | SNDRV_CTL_ELEM_ACCESS_VOLATILE, \ @@ -3015,7 +3016,7 @@ static int snd_hdsp_get_spdif_sync_check(snd_kcontrol_t * kcontrol, snd_ctl_elem } #define HDSP_ADATSYNC_SYNC_CHECK(xname, xindex) \ -{ .iface = SNDRV_CTL_ELEM_IFACE_HWDEP, \ +{ .iface = SNDRV_CTL_ELEM_IFACE_MIXER, \ .name = xname, \ .index = xindex, \ .access = SNDRV_CTL_ELEM_ACCESS_READ | SNDRV_CTL_ELEM_ACCESS_VOLATILE, \ @@ -3046,7 +3047,7 @@ static int snd_hdsp_get_adatsync_sync_check(snd_kcontrol_t * kcontrol, snd_ctl_e } #define HDSP_ADAT_SYNC_CHECK \ -{ .iface = SNDRV_CTL_ELEM_IFACE_HWDEP, \ +{ .iface = SNDRV_CTL_ELEM_IFACE_MIXER, \ .access = SNDRV_CTL_ELEM_ACCESS_READ | SNDRV_CTL_ELEM_ACCESS_VOLATILE, \ .info = snd_hdsp_info_sync_check, \ .get = snd_hdsp_get_adat_sync_check \ @@ -3103,7 +3104,7 @@ HDSP_XLR_BREAKOUT_CABLE("XLR Breakout Cable", 0) static snd_kcontrol_new_t snd_hdsp_controls[] = { { - .iface = SNDRV_CTL_ELEM_IFACE_PCM, + .iface = SNDRV_CTL_ELEM_IFACE_MIXER, .name = SNDRV_CTL_NAME_IEC958("",PLAYBACK,DEFAULT), .info = snd_hdsp_control_spdif_info, .get = snd_hdsp_control_spdif_get, @@ -3111,7 +3112,7 @@ static snd_kcontrol_new_t snd_hdsp_controls[] = { }, { .access = SNDRV_CTL_ELEM_ACCESS_READWRITE | SNDRV_CTL_ELEM_ACCESS_INACTIVE, - .iface = SNDRV_CTL_ELEM_IFACE_PCM, + .iface = SNDRV_CTL_ELEM_IFACE_MIXER, .name = SNDRV_CTL_NAME_IEC958("",PLAYBACK,PCM_STREAM), .info = snd_hdsp_control_spdif_stream_info, .get = snd_hdsp_control_spdif_stream_get, @@ -3146,8 +3147,6 @@ HDSP_SPDIF_NON_AUDIO("IEC958 Non-audio Bit", 0), /* 'Sample Clock Source' complies with the alsa control naming scheme */ HDSP_CLOCK_SOURCE("Sample Clock Source", 0), { - /* FIXME: should be PCM or MIXER? */ - /* .iface = SNDRV_CTL_ELEM_IFACE_PCM, */ .iface = SNDRV_CTL_ELEM_IFACE_MIXER, .name = "Sample Clock Source Locking", .info = snd_hdsp_info_clock_source_lock, diff --git a/sound/pci/rme9652/hdspm.c b/sound/pci/rme9652/hdspm.c index 9e86d0eb41c..f6daec4e4d9 100644 --- a/sound/pci/rme9652/hdspm.c +++ b/sound/pci/rme9652/hdspm.c @@ -1168,7 +1168,7 @@ static void hdspm_midi_tasklet(unsigned long arg) /* get the system sample rate which is set */ #define HDSPM_SYSTEM_SAMPLE_RATE(xname, xindex) \ -{ .iface = SNDRV_CTL_ELEM_IFACE_HWDEP, \ +{ .iface = SNDRV_CTL_ELEM_IFACE_MIXER, \ .name = xname, \ .index = xindex, \ .access = SNDRV_CTL_ELEM_ACCESS_READ, \ @@ -1195,7 +1195,7 @@ static int snd_hdspm_get_system_sample_rate(snd_kcontrol_t * kcontrol, } #define HDSPM_AUTOSYNC_SAMPLE_RATE(xname, xindex) \ -{ .iface = SNDRV_CTL_ELEM_IFACE_PCM, \ +{ .iface = SNDRV_CTL_ELEM_IFACE_MIXER, \ .name = xname, \ .index = xindex, \ .access = SNDRV_CTL_ELEM_ACCESS_READ, \ @@ -1264,7 +1264,7 @@ static int snd_hdspm_get_autosync_sample_rate(snd_kcontrol_t * kcontrol, } #define HDSPM_SYSTEM_CLOCK_MODE(xname, xindex) \ -{ .iface = SNDRV_CTL_ELEM_IFACE_HWDEP, \ +{ .iface = SNDRV_CTL_ELEM_IFACE_MIXER, \ .name = xname, \ .index = xindex, \ .access = SNDRV_CTL_ELEM_ACCESS_READ, \ @@ -1310,7 +1310,7 @@ static int snd_hdspm_get_system_clock_mode(snd_kcontrol_t * kcontrol, } #define HDSPM_CLOCK_SOURCE(xname, xindex) \ -{ .iface = SNDRV_CTL_ELEM_IFACE_PCM, \ +{ .iface = SNDRV_CTL_ELEM_IFACE_MIXER, \ .name = xname, \ .index = xindex, \ .info = snd_hdspm_info_clock_source, \ @@ -1457,7 +1457,7 @@ static int snd_hdspm_put_clock_source(snd_kcontrol_t * kcontrol, } #define HDSPM_PREF_SYNC_REF(xname, xindex) \ -{ .iface = SNDRV_CTL_ELEM_IFACE_HWDEP, \ +{ .iface = SNDRV_CTL_ELEM_IFACE_MIXER, \ .name = xname, \ .index = xindex, \ .info = snd_hdspm_info_pref_sync_ref, \ @@ -1547,7 +1547,7 @@ static int snd_hdspm_put_pref_sync_ref(snd_kcontrol_t * kcontrol, } #define HDSPM_AUTOSYNC_REF(xname, xindex) \ -{ .iface = SNDRV_CTL_ELEM_IFACE_HWDEP, \ +{ .iface = SNDRV_CTL_ELEM_IFACE_MIXER, \ .name = xname, \ .index = xindex, \ .access = SNDRV_CTL_ELEM_ACCESS_READ, \ @@ -1604,7 +1604,7 @@ static int snd_hdspm_get_autosync_ref(snd_kcontrol_t * kcontrol, } #define HDSPM_LINE_OUT(xname, xindex) \ -{ .iface = SNDRV_CTL_ELEM_IFACE_HWDEP, \ +{ .iface = SNDRV_CTL_ELEM_IFACE_MIXER, \ .name = xname, \ .index = xindex, \ .info = snd_hdspm_info_line_out, \ @@ -1668,7 +1668,7 @@ static int snd_hdspm_put_line_out(snd_kcontrol_t * kcontrol, } #define HDSPM_TX_64(xname, xindex) \ -{ .iface = SNDRV_CTL_ELEM_IFACE_HWDEP, \ +{ .iface = SNDRV_CTL_ELEM_IFACE_MIXER, \ .name = xname, \ .index = xindex, \ .info = snd_hdspm_info_tx_64, \ @@ -1731,7 +1731,7 @@ static int snd_hdspm_put_tx_64(snd_kcontrol_t * kcontrol, } #define HDSPM_C_TMS(xname, xindex) \ -{ .iface = SNDRV_CTL_ELEM_IFACE_HWDEP, \ +{ .iface = SNDRV_CTL_ELEM_IFACE_MIXER, \ .name = xname, \ .index = xindex, \ .info = snd_hdspm_info_c_tms, \ @@ -1794,7 +1794,7 @@ static int snd_hdspm_put_c_tms(snd_kcontrol_t * kcontrol, } #define HDSPM_SAFE_MODE(xname, xindex) \ -{ .iface = SNDRV_CTL_ELEM_IFACE_HWDEP, \ +{ .iface = SNDRV_CTL_ELEM_IFACE_MIXER, \ .name = xname, \ .index = xindex, \ .info = snd_hdspm_info_safe_mode, \ @@ -1857,7 +1857,7 @@ static int snd_hdspm_put_safe_mode(snd_kcontrol_t * kcontrol, } #define HDSPM_INPUT_SELECT(xname, xindex) \ -{ .iface = SNDRV_CTL_ELEM_IFACE_HWDEP, \ +{ .iface = SNDRV_CTL_ELEM_IFACE_MIXER, \ .name = xname, \ .index = xindex, \ .info = snd_hdspm_info_input_select, \ @@ -1941,6 +1941,7 @@ static int snd_hdspm_put_input_select(snd_kcontrol_t * kcontrol, { .iface = SNDRV_CTL_ELEM_IFACE_HWDEP, \ .name = xname, \ .index = xindex, \ + .device = 0, \ .access = SNDRV_CTL_ELEM_ACCESS_READWRITE | \ SNDRV_CTL_ELEM_ACCESS_VOLATILE, \ .info = snd_hdspm_info_mixer, \ @@ -2124,7 +2125,7 @@ static int snd_hdspm_put_playback_mixer(snd_kcontrol_t * kcontrol, } #define HDSPM_WC_SYNC_CHECK(xname, xindex) \ -{ .iface = SNDRV_CTL_ELEM_IFACE_HWDEP, \ +{ .iface = SNDRV_CTL_ELEM_IFACE_MIXER, \ .name = xname, \ .index = xindex, \ .access = SNDRV_CTL_ELEM_ACCESS_READ | SNDRV_CTL_ELEM_ACCESS_VOLATILE, \ @@ -2170,7 +2171,7 @@ static int snd_hdspm_get_wc_sync_check(snd_kcontrol_t * kcontrol, #define HDSPM_MADI_SYNC_CHECK(xname, xindex) \ -{ .iface = SNDRV_CTL_ELEM_IFACE_HWDEP, \ +{ .iface = SNDRV_CTL_ELEM_IFACE_MIXER, \ .name = xname, \ .index = xindex, \ .access = SNDRV_CTL_ELEM_ACCESS_READ | SNDRV_CTL_ELEM_ACCESS_VOLATILE, \ diff --git a/sound/pci/rme9652/rme9652.c b/sound/pci/rme9652/rme9652.c index 1bc9d0df851..6e3a91dba3e 100644 --- a/sound/pci/rme9652/rme9652.c +++ b/sound/pci/rme9652/rme9652.c @@ -893,7 +893,7 @@ static int snd_rme9652_control_spdif_mask_get(snd_kcontrol_t * kcontrol, snd_ctl } #define RME9652_ADAT1_IN(xname, xindex) \ -{ .iface = SNDRV_CTL_ELEM_IFACE_PCM, .name = xname, .index = xindex, \ +{ .iface = SNDRV_CTL_ELEM_IFACE_MIXER, .name = xname, .index = xindex, \ .info = snd_rme9652_info_adat1_in, \ .get = snd_rme9652_get_adat1_in, \ .put = snd_rme9652_put_adat1_in } @@ -971,7 +971,7 @@ static int snd_rme9652_put_adat1_in(snd_kcontrol_t * kcontrol, snd_ctl_elem_valu } #define RME9652_SPDIF_IN(xname, xindex) \ -{ .iface = SNDRV_CTL_ELEM_IFACE_PCM, .name = xname, .index = xindex, \ +{ .iface = SNDRV_CTL_ELEM_IFACE_MIXER, .name = xname, .index = xindex, \ .info = snd_rme9652_info_spdif_in, \ .get = snd_rme9652_get_spdif_in, .put = snd_rme9652_put_spdif_in } @@ -1042,7 +1042,7 @@ static int snd_rme9652_put_spdif_in(snd_kcontrol_t * kcontrol, snd_ctl_elem_valu } #define RME9652_SPDIF_OUT(xname, xindex) \ -{ .iface = SNDRV_CTL_ELEM_IFACE_PCM, .name = xname, .index = xindex, \ +{ .iface = SNDRV_CTL_ELEM_IFACE_MIXER, .name = xname, .index = xindex, \ .info = snd_rme9652_info_spdif_out, \ .get = snd_rme9652_get_spdif_out, .put = snd_rme9652_put_spdif_out } @@ -1110,7 +1110,7 @@ static int snd_rme9652_put_spdif_out(snd_kcontrol_t * kcontrol, snd_ctl_elem_val } #define RME9652_SYNC_MODE(xname, xindex) \ -{ .iface = SNDRV_CTL_ELEM_IFACE_PCM, .name = xname, .index = xindex, \ +{ .iface = SNDRV_CTL_ELEM_IFACE_MIXER, .name = xname, .index = xindex, \ .info = snd_rme9652_info_sync_mode, \ .get = snd_rme9652_get_sync_mode, .put = snd_rme9652_put_sync_mode } @@ -1195,7 +1195,7 @@ static int snd_rme9652_put_sync_mode(snd_kcontrol_t * kcontrol, snd_ctl_elem_val } #define RME9652_SYNC_PREF(xname, xindex) \ -{ .iface = SNDRV_CTL_ELEM_IFACE_PCM, .name = xname, .index = xindex, \ +{ .iface = SNDRV_CTL_ELEM_IFACE_MIXER, .name = xname, .index = xindex, \ .info = snd_rme9652_info_sync_pref, \ .get = snd_rme9652_get_sync_pref, .put = snd_rme9652_put_sync_pref } @@ -1340,7 +1340,7 @@ static int snd_rme9652_put_thru(snd_kcontrol_t * kcontrol, snd_ctl_elem_value_t } #define RME9652_PASSTHRU(xname, xindex) \ -{ .iface = SNDRV_CTL_ELEM_IFACE_PCM, .name = xname, .index = xindex, \ +{ .iface = SNDRV_CTL_ELEM_IFACE_MIXER, .name = xname, .index = xindex, \ .info = snd_rme9652_info_passthru, \ .put = snd_rme9652_put_passthru, \ .get = snd_rme9652_get_passthru } @@ -1386,7 +1386,7 @@ static int snd_rme9652_put_passthru(snd_kcontrol_t * kcontrol, snd_ctl_elem_valu /* Read-only switches */ #define RME9652_SPDIF_RATE(xname, xindex) \ -{ .iface = SNDRV_CTL_ELEM_IFACE_PCM, .name = xname, .index = xindex, \ +{ .iface = SNDRV_CTL_ELEM_IFACE_MIXER, .name = xname, .index = xindex, \ .access = SNDRV_CTL_ELEM_ACCESS_READ | SNDRV_CTL_ELEM_ACCESS_VOLATILE, \ .info = snd_rme9652_info_spdif_rate, \ .get = snd_rme9652_get_spdif_rate } @@ -1411,7 +1411,7 @@ static int snd_rme9652_get_spdif_rate(snd_kcontrol_t * kcontrol, snd_ctl_elem_va } #define RME9652_ADAT_SYNC(xname, xindex, xidx) \ -{ .iface = SNDRV_CTL_ELEM_IFACE_PCM, .name = xname, .index = xindex, \ +{ .iface = SNDRV_CTL_ELEM_IFACE_MIXER, .name = xname, .index = xindex, \ .access = SNDRV_CTL_ELEM_ACCESS_READ | SNDRV_CTL_ELEM_ACCESS_VOLATILE, \ .info = snd_rme9652_info_adat_sync, \ .get = snd_rme9652_get_adat_sync, .private_value = xidx } @@ -1447,7 +1447,7 @@ static int snd_rme9652_get_adat_sync(snd_kcontrol_t * kcontrol, snd_ctl_elem_val } #define RME9652_TC_VALID(xname, xindex) \ -{ .iface = SNDRV_CTL_ELEM_IFACE_PCM, .name = xname, .index = xindex, \ +{ .iface = SNDRV_CTL_ELEM_IFACE_MIXER, .name = xname, .index = xindex, \ .access = SNDRV_CTL_ELEM_ACCESS_READ | SNDRV_CTL_ELEM_ACCESS_VOLATILE, \ .info = snd_rme9652_info_tc_valid, \ .get = snd_rme9652_get_tc_valid } @@ -1529,7 +1529,7 @@ static int snd_rme9652_get_tc_value(void *private_data, static snd_kcontrol_new_t snd_rme9652_controls[] = { { - .iface = SNDRV_CTL_ELEM_IFACE_PCM, + .iface = SNDRV_CTL_ELEM_IFACE_MIXER, .name = SNDRV_CTL_NAME_IEC958("",PLAYBACK,DEFAULT), .info = snd_rme9652_control_spdif_info, .get = snd_rme9652_control_spdif_get, @@ -1537,7 +1537,7 @@ static snd_kcontrol_new_t snd_rme9652_controls[] = { }, { .access = SNDRV_CTL_ELEM_ACCESS_READWRITE | SNDRV_CTL_ELEM_ACCESS_INACTIVE, - .iface = SNDRV_CTL_ELEM_IFACE_PCM, + .iface = SNDRV_CTL_ELEM_IFACE_MIXER, .name = SNDRV_CTL_NAME_IEC958("",PLAYBACK,PCM_STREAM), .info = snd_rme9652_control_spdif_stream_info, .get = snd_rme9652_control_spdif_stream_get, @@ -1568,7 +1568,7 @@ RME9652_SPDIF_OUT("IEC958 Output also on ADAT1", 0), RME9652_SYNC_MODE("Sync Mode", 0), RME9652_SYNC_PREF("Preferred Sync Source", 0), { - .iface = SNDRV_CTL_ELEM_IFACE_PCM, + .iface = SNDRV_CTL_ELEM_IFACE_MIXER, .name = "Channels Thru", .index = 0, .info = snd_rme9652_info_thru, -- cgit v1.2.3 From 0ca06a00e206b963587ac471e6d1c52bf33b9a18 Mon Sep 17 00:00:00 2001 From: Liam Girdwood Date: Fri, 29 Jul 2005 16:13:36 +0200 Subject: [ALSA] AC97 bus interface for ad-hoc drivers AC97 Codec,PCI drivers I've made the review changes and as requested I've pasted the RFC by Nicolas below:- 'I would like to know what people think of the following patch. It allows for a codec on an AC97 bus to be shared with other drivers which are completely unrelated to audio. It registers a new bus type, and whenever a codec instance is created then a device for it is also registered with the driver model using that bus type. This allows, for example, to use the extra features of the UCB1400 like the touchscreen interface and the additional GPIOs and ADCs available on that chip for battery monitoring. I have a working UCB1400 touchscreen driver here that simply registers with the driver model happily working alongside with audio features using this.' Changes over RFC:- o Now matches codec name within codec group. o Added ac97_dev_release() to stop kernel complaining about no release method for device. o Added 'config SND_AC97_BUS' to sound/pci/Kconfig and moved 'config SND_AC97_CODEC' out with the PCI=n statement. o module is now called snd-ac97-bus Signed-off-by: Liam Girdwood Signed-off-by: Nicolas Pitre Signed-off-by: Takashi Iwai --- include/sound/ac97_codec.h | 6 ++++ sound/pci/Kconfig | 10 ++++-- sound/pci/ac97/Makefile | 2 ++ sound/pci/ac97/ac97_bus.c | 79 +++++++++++++++++++++++++++++++++++++++++++++ sound/pci/ac97/ac97_codec.c | 35 ++++++++++++++++++++ 5 files changed, 129 insertions(+), 3 deletions(-) create mode 100644 sound/pci/ac97/ac97_bus.c diff --git a/include/sound/ac97_codec.h b/include/sound/ac97_codec.h index cbe72e06c46..2857cf0472d 100644 --- a/include/sound/ac97_codec.h +++ b/include/sound/ac97_codec.h @@ -26,6 +26,7 @@ */ #include +#include #include "pcm.h" #include "control.h" #include "info.h" @@ -523,6 +524,7 @@ struct _snd_ac97 { /* jack-sharing info */ unsigned char indep_surround; unsigned char channel_mode; + struct device dev; }; /* conditions */ @@ -602,4 +604,8 @@ struct ac97_enum { unsigned short mask; const char **texts; }; + +/* ad hoc AC97 device driver access */ +extern struct bus_type ac97_bus_type; + #endif /* __SOUND_AC97_CODEC_H */ diff --git a/sound/pci/Kconfig b/sound/pci/Kconfig index 26b42bb20a0..1e458919cce 100644 --- a/sound/pci/Kconfig +++ b/sound/pci/Kconfig @@ -1,11 +1,15 @@ # ALSA PCI drivers -menu "PCI devices" - depends on SND!=n && PCI - config SND_AC97_CODEC tristate select SND_PCM + select SND_AC97_BUS + +config SND_AC97_BUS + tristate + +menu "PCI devices" + depends on SND!=n && PCI config SND_ALI5451 tristate "ALi M5451 PCI Audio Controller" diff --git a/sound/pci/ac97/Makefile b/sound/pci/ac97/Makefile index 3c3222122d8..77b3482cb13 100644 --- a/sound/pci/ac97/Makefile +++ b/sound/pci/ac97/Makefile @@ -10,9 +10,11 @@ snd-ac97-codec-objs += ac97_proc.o endif snd-ak4531-codec-objs := ak4531_codec.o +snd-ac97-bus-objs := ac97_bus.o # Toplevel Module Dependency obj-$(CONFIG_SND_AC97_CODEC) += snd-ac97-codec.o obj-$(CONFIG_SND_ENS1370) += snd-ak4531-codec.o +obj-$(CONFIG_SND_AC97_BUS) += snd-ac97-bus.o obj-m := $(sort $(obj-m)) diff --git a/sound/pci/ac97/ac97_bus.c b/sound/pci/ac97/ac97_bus.c new file mode 100644 index 00000000000..227f8b9f67c --- /dev/null +++ b/sound/pci/ac97/ac97_bus.c @@ -0,0 +1,79 @@ +/* + * Linux driver model AC97 bus interface + * + * Author: Nicolas Pitre + * Created: Jan 14, 2005 + * Copyright: (C) MontaVista Software Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#include +#include +#include +#include + +/* + * Codec families have names seperated by commas, so we search for an + * individual codec name within the family string. + */ +static int ac97_bus_match(struct device *dev, struct device_driver *drv) +{ + return (strstr(dev->bus_id, drv->name) != NULL); +} + +static int ac97_bus_suspend(struct device *dev, pm_message_t state) +{ + int ret = 0; + + if (dev->driver && dev->driver->suspend) { + ret = dev->driver->suspend(dev, state, SUSPEND_DISABLE); + if (ret == 0) + ret = dev->driver->suspend(dev, state, SUSPEND_SAVE_STATE); + if (ret == 0) + ret = dev->driver->suspend(dev, state, SUSPEND_POWER_DOWN); + } + return ret; +} + +static int ac97_bus_resume(struct device *dev) +{ + int ret = 0; + + if (dev->driver && dev->driver->resume) { + ret = dev->driver->resume(dev, RESUME_POWER_ON); + if (ret == 0) + ret = dev->driver->resume(dev, RESUME_RESTORE_STATE); + if (ret == 0) + ret = dev->driver->resume(dev, RESUME_ENABLE); + } + return ret; +} + +struct bus_type ac97_bus_type = { + .name = "ac97", + .match = ac97_bus_match, + .suspend = ac97_bus_suspend, + .resume = ac97_bus_resume, +}; + +static int __init ac97_bus_init(void) +{ + return bus_register(&ac97_bus_type); +} + +subsys_initcall(ac97_bus_init); + +static void __exit ac97_bus_exit(void) +{ + bus_unregister(&ac97_bus_type); +} + +module_exit(ac97_bus_exit); + +EXPORT_SYMBOL(ac97_bus_type); + +MODULE_LICENSE("GPL"); diff --git a/sound/pci/ac97/ac97_codec.c b/sound/pci/ac97/ac97_codec.c index cbf790270c3..33dba10f03e 100644 --- a/sound/pci/ac97/ac97_codec.c +++ b/sound/pci/ac97/ac97_codec.c @@ -1813,6 +1813,39 @@ int snd_ac97_bus(snd_card_t *card, int num, ac97_bus_ops_t *ops, return 0; } +/* stop no dev release warning */ +static void ac97_device_release(struct device * dev) +{ +} + +/* register ac97 codec to bus */ +static int snd_ac97_dev_register(snd_device_t *device) +{ + ac97_t *ac97 = device->device_data; + int err; + + ac97->dev.bus = &ac97_bus_type; + ac97->dev.parent = ac97->bus->card->dev; + ac97->dev.platform_data = ac97; + ac97->dev.release = ac97_device_release; + strncpy(ac97->dev.bus_id, snd_ac97_get_short_name(ac97), BUS_ID_SIZE); + if ((err = device_register(&ac97->dev)) < 0) { + snd_printk(KERN_ERR "Can't register ac97 bus\n"); + ac97->dev.bus = NULL; + return err; + } + return 0; +} + +/* unregister ac97 codec */ +static int snd_ac97_dev_unregister(snd_device_t *device) +{ + ac97_t *ac97 = device->device_data; + if (ac97->dev.bus) + device_unregister(&ac97->dev); + return snd_ac97_free(ac97); +} + /* build_ops to do nothing */ static struct snd_ac97_build_ops null_build_ops; @@ -1846,6 +1879,8 @@ int snd_ac97_mixer(ac97_bus_t *bus, ac97_template_t *template, ac97_t **rac97) const ac97_codec_id_t *pid; static snd_device_ops_t ops = { .dev_free = snd_ac97_dev_free, + .dev_register = snd_ac97_dev_register, + .dev_unregister = snd_ac97_dev_unregister, }; snd_assert(rac97 != NULL, return -EINVAL); -- cgit v1.2.3 From 267d4d6475cf591a5f838449b40cbacfc2915e8b Mon Sep 17 00:00:00 2001 From: Henrik Kretzschmar Date: Fri, 29 Jul 2005 16:59:31 +0200 Subject: [ALSA] adds __init and in snd_memory_init() ALSA Core This patch adds the __init macro to snd_memory_init(). Signed-off-by: Henrik Kretzschmar Signed-off-by: Takashi Iwai --- sound/core/memory.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/sound/core/memory.c b/sound/core/memory.c index f6895577bf8..1622893d00a 100644 --- a/sound/core/memory.c +++ b/sound/core/memory.c @@ -56,7 +56,7 @@ static DEFINE_SPINLOCK(snd_alloc_vmalloc_lock); #define VMALLOC_MAGIC 0x87654320 static snd_info_entry_t *snd_memory_info_entry; -void snd_memory_init(void) +void __init snd_memory_init(void) { snd_alloc_kmalloc = 0; snd_alloc_vmalloc = 0; -- cgit v1.2.3 From 506d4c6a5f909d78c3d624693f10d8cc0eafda48 Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Wed, 3 Aug 2005 14:02:47 +0200 Subject: [ALSA] ad1816a - Add clockfreq module option Documentation Added clockfreq module option for the card with a different clock frequency than 33kHz. Signed-off-by: Takashi Iwai --- Documentation/sound/alsa/ALSA-Configuration.txt | 1 + 1 file changed, 1 insertion(+) diff --git a/Documentation/sound/alsa/ALSA-Configuration.txt b/Documentation/sound/alsa/ALSA-Configuration.txt index a18ecb92b35..5c49ba07e70 100644 --- a/Documentation/sound/alsa/ALSA-Configuration.txt +++ b/Documentation/sound/alsa/ALSA-Configuration.txt @@ -132,6 +132,7 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed. mpu_irq - IRQ # for MPU-401 UART (PnP setup) dma1 - first DMA # for AD1816A chip (PnP setup) dma2 - second DMA # for AD1816A chip (PnP setup) + clockfreq - Clock frequency for AD1816A chip (default = 0, 33000Hz) Module supports up to 8 cards, autoprobe and PnP. -- cgit v1.2.3 From 10e8d78a94fc57f1bf11d50b97ff85b005e46d0b Mon Sep 17 00:00:00 2001 From: Clemens Ladisch Date: Wed, 3 Aug 2005 13:40:08 +0200 Subject: [ALSA] use SNDRV_CTL_NAME_IEC958 macro CMI8330 driver,ENS1370/1+ driver,FM801 driver,VIA82xx driver,AC97 Codec ALI5451 driver,CS46xx driver,EMU10K1/EMU10K2 driver,HDA Codec driver ICE1712 driver,ICE1724 driver Where appropriate, use the SNDRV_CTL_NAME_IEC958 instead of a literal string. Signed-off-by: Clemens Ladisch --- sound/isa/cmi8330.c | 4 ++-- sound/pci/ac97/ac97_patch.c | 8 ++++---- sound/pci/ali5451/ali5451.c | 4 ++-- sound/pci/cs46xx/cs46xx_lib.c | 6 +++--- sound/pci/emu10k1/emufx.c | 26 +++++++++++++------------- sound/pci/ens1370.c | 2 +- sound/pci/fm801.c | 8 ++++---- sound/pci/hda/patch_analog.c | 4 ++-- sound/pci/ice1712/ice1712.c | 6 +++--- sound/pci/ice1712/ice1724.c | 2 +- sound/pci/via82xx.c | 2 +- 11 files changed, 36 insertions(+), 36 deletions(-) diff --git a/sound/isa/cmi8330.c b/sound/isa/cmi8330.c index 46776cc0c15..1fce8b9f37c 100644 --- a/sound/isa/cmi8330.c +++ b/sound/isa/cmi8330.c @@ -194,8 +194,8 @@ AD1848_DOUBLE("Wavetable Capture Volume", 0, CMI8330_WAVGAIN, CMI8330_WAVGAIN, 4 AD1848_SINGLE("3D Control - Switch", 0, CMI8330_RMUX3D, 5, 1, 1), AD1848_SINGLE("PC Speaker Playback Volume", 0, CMI8330_OUTPUTVOL, 3, 3, 0), AD1848_SINGLE("FM Playback Switch", 0, CMI8330_RECMUX, 3, 1, 1), -AD1848_SINGLE("IEC958 Input Capture Switch", 0, CMI8330_RMUX3D, 7, 1, 1), -AD1848_SINGLE("IEC958 Input Playback Switch", 0, CMI8330_MUTEMUX, 7, 1, 1), +AD1848_SINGLE(SNDRV_CTL_NAME_IEC958("Input ",CAPTURE,SWITCH), 0, CMI8330_RMUX3D, 7, 1, 1), +AD1848_SINGLE(SNDRV_CTL_NAME_IEC958("Input ",PLAYBACK,SWITCH), 0, CMI8330_MUTEMUX, 7, 1, 1), }; #ifdef ENABLE_SB_MIXER diff --git a/sound/pci/ac97/ac97_patch.c b/sound/pci/ac97/ac97_patch.c index d4bb99fc896..00fb5199246 100644 --- a/sound/pci/ac97/ac97_patch.c +++ b/sound/pci/ac97/ac97_patch.c @@ -1955,7 +1955,7 @@ static const snd_kcontrol_new_t snd_ac97_controls_alc650[] = { }; static const snd_kcontrol_new_t snd_ac97_spdif_controls_alc650[] = { - AC97_SINGLE("IEC958 Capture Switch", AC97_ALC650_MULTICH, 11, 1, 0), + AC97_SINGLE(SNDRV_CTL_NAME_IEC958("",CAPTURE,SWITCH), AC97_ALC650_MULTICH, 11, 1, 0), AC97_SINGLE("Analog to IEC958 Output", AC97_ALC650_MULTICH, 12, 1, 0), /* disable this controls since it doesn't work as expected */ /* AC97_SINGLE("IEC958 Input Monitor", AC97_ALC650_MULTICH, 13, 1, 0), */ @@ -2098,12 +2098,12 @@ static int alc655_iec958_route_put(snd_kcontrol_t *kcontrol, snd_ctl_elem_value_ } static const snd_kcontrol_new_t snd_ac97_spdif_controls_alc655[] = { - AC97_PAGE_SINGLE("IEC958 Capture Switch", AC97_ALC650_MULTICH, 11, 1, 0, 0), + AC97_PAGE_SINGLE(SNDRV_CTL_NAME_IEC958("",CAPTURE,SWITCH), AC97_ALC650_MULTICH, 11, 1, 0, 0), /* disable this controls since it doesn't work as expected */ /* AC97_PAGE_SINGLE("IEC958 Input Monitor", AC97_ALC650_MULTICH, 14, 1, 0, 0), */ { .iface = SNDRV_CTL_ELEM_IFACE_MIXER, - .name = "IEC958 Playback Route", + .name = SNDRV_CTL_NAME_IEC958("",PLAYBACK,NONE) "Route", .info = alc655_iec958_route_info, .get = alc655_iec958_route_get, .put = alc655_iec958_route_put, @@ -2682,7 +2682,7 @@ static const snd_kcontrol_new_t snd_ac97_controls_it2646[] = { }; static const snd_kcontrol_new_t snd_ac97_spdif_controls_it2646[] = { - AC97_SINGLE("IEC958 Capture Switch", 0x76, 11, 1, 0), + AC97_SINGLE(SNDRV_CTL_NAME_IEC958("",CAPTURE,SWITCH), 0x76, 11, 1, 0), AC97_SINGLE("Analog to IEC958 Output", 0x76, 12, 1, 0), AC97_SINGLE("IEC958 Input Monitor", 0x76, 13, 1, 0), }; diff --git a/sound/pci/ali5451/ali5451.c b/sound/pci/ali5451/ali5451.c index f08ae71f902..cb12d780a6c 100644 --- a/sound/pci/ali5451/ali5451.c +++ b/sound/pci/ali5451/ali5451.c @@ -1959,9 +1959,9 @@ static int snd_ali5451_spdif_put(snd_kcontrol_t * kcontrol, snd_ctl_elem_value_t static snd_kcontrol_new_t snd_ali5451_mixer_spdif[] __devinitdata = { /* spdif aplayback switch */ /* FIXME: "IEC958 Playback Switch" may conflict with one on ac97_codec */ - ALI5451_SPDIF("IEC958 Output switch", 0, 0), + ALI5451_SPDIF(SNDRV_CTL_NAME_IEC958("Output ",NONE,SWITCH), 0, 0), /* spdif out to spdif channel */ - ALI5451_SPDIF("IEC958 Channel Output Switch", 0, 1), + ALI5451_SPDIF(SNDRV_CTL_NAME_IEC958("Channel Output ",NONE,SWITCH), 0, 1), /* spdif in from spdif channel */ ALI5451_SPDIF(SNDRV_CTL_NAME_IEC958("",CAPTURE,SWITCH), 0, 2) }; diff --git a/sound/pci/cs46xx/cs46xx_lib.c b/sound/pci/cs46xx/cs46xx_lib.c index 1546aec02ea..5eb9e0bb910 100644 --- a/sound/pci/cs46xx/cs46xx_lib.c +++ b/sound/pci/cs46xx/cs46xx_lib.c @@ -2231,7 +2231,7 @@ static snd_kcontrol_new_t snd_cs46xx_controls[] __devinitdata = { }, { .iface = SNDRV_CTL_ELEM_IFACE_MIXER, - .name = "IEC958 Output Switch", + .name = SNDRV_CTL_NAME_IEC958("Output ",NONE,SWITCH), .info = snd_mixer_boolean_info, .get = snd_cs46xx_iec958_get, .put = snd_cs46xx_iec958_put, @@ -2239,7 +2239,7 @@ static snd_kcontrol_new_t snd_cs46xx_controls[] __devinitdata = { }, { .iface = SNDRV_CTL_ELEM_IFACE_MIXER, - .name = "IEC958 Input Switch", + .name = SNDRV_CTL_NAME_IEC958("Input ",NONE,SWITCH), .info = snd_mixer_boolean_info, .get = snd_cs46xx_iec958_get, .put = snd_cs46xx_iec958_put, @@ -2249,7 +2249,7 @@ static snd_kcontrol_new_t snd_cs46xx_controls[] __devinitdata = { /* Input IEC958 volume does not work for the moment. (Benny) */ { .iface = SNDRV_CTL_ELEM_IFACE_MIXER, - .name = "IEC958 Input Volume", + .name = SNDRV_CTL_NAME_IEC958("Input ",NONE,VOLUME), .info = snd_cs46xx_vol_info, .get = snd_cs46xx_vol_iec958_get, .put = snd_cs46xx_vol_iec958_put, diff --git a/sound/pci/emu10k1/emufx.c b/sound/pci/emu10k1/emufx.c index 0529fb28112..637c555cfdb 100644 --- a/sound/pci/emu10k1/emufx.c +++ b/sound/pci/emu10k1/emufx.c @@ -1159,12 +1159,12 @@ A_OP(icode, &ptr, iMAC0, A_GPR(var), A_GPR(var), A_GPR(vol), A_EXTIN(input)) /* Optical SPDIF Playback Volume */ A_ADD_VOLUME_IN(stereo_mix, gpr, A_EXTIN_OPT_SPDIF_L); A_ADD_VOLUME_IN(stereo_mix+1, gpr+1, A_EXTIN_OPT_SPDIF_R); - snd_emu10k1_init_stereo_control(&controls[nctl++], "IEC958 Optical Playback Volume", gpr, 0); + snd_emu10k1_init_stereo_control(&controls[nctl++], SNDRV_CTL_NAME_IEC958("Optical ",PLAYBACK,VOLUME), gpr, 0); gpr += 2; /* Optical SPDIF Capture Volume */ A_ADD_VOLUME_IN(capture, gpr, A_EXTIN_OPT_SPDIF_L); A_ADD_VOLUME_IN(capture+1, gpr+1, A_EXTIN_OPT_SPDIF_R); - snd_emu10k1_init_stereo_control(&controls[nctl++], "IEC958 Optical Capture Volume", gpr, 0); + snd_emu10k1_init_stereo_control(&controls[nctl++], SNDRV_CTL_NAME_IEC958("Optical ",CAPTURE,VOLUME), gpr, 0); gpr += 2; /* Line2 Playback Volume */ @@ -1389,7 +1389,7 @@ A_OP(icode, &ptr, iMAC0, A_GPR(var), A_GPR(var), A_GPR(vol), A_EXTIN(input)) A_OP(icode, &ptr, iACC3, A_EXTOUT(A_EXTOUT_FRONT_L + z), A_GPR(tmp + 0), A_GPR(tmp + 1), A_C_00000000); } } - snd_emu10k1_init_stereo_onoff_control(controls + nctl++, "IEC958 Optical Raw Playback Switch", gpr, 0); + snd_emu10k1_init_stereo_onoff_control(controls + nctl++, SNDRV_CTL_NAME_IEC958("Optical Raw ",PLAYBACK,SWITCH), gpr, 0); gpr += 2; A_PUT_STEREO_OUTPUT(A_EXTOUT_REAR_L, A_EXTOUT_REAR_R, playback+2 + SND_EMU10K1_PLAYBACK_CHANNELS); @@ -1716,7 +1716,7 @@ static int __devinit _snd_emu10k1_init_efx(emu10k1_t *emu) /* IEC958 TTL Playback Volume */ for (z = 0; z < 2; z++) VOLUME_ADDIN(icode, &ptr, playback + z, EXTIN_SPDIF_CD_L + z, gpr + z); - snd_emu10k1_init_stereo_control(controls + i++, "IEC958 TTL Playback Volume", gpr, 0); + snd_emu10k1_init_stereo_control(controls + i++, SNDRV_CTL_NAME_IEC958("TTL ",PLAYBACK,VOLUME), gpr, 0); gpr += 2; /* IEC958 TTL Capture Volume + Switch */ @@ -1724,8 +1724,8 @@ static int __devinit _snd_emu10k1_init_efx(emu10k1_t *emu) SWITCH_IN(icode, &ptr, tmp + 0, EXTIN_SPDIF_CD_L + z, gpr + 2 + z); VOLUME_ADD(icode, &ptr, capture + z, tmp + 0, gpr + z); } - snd_emu10k1_init_stereo_control(controls + i++, "IEC958 TTL Capture Volume", gpr, 0); - snd_emu10k1_init_stereo_onoff_control(controls + i++, "IEC958 TTL Capture Switch", gpr + 2, 0); + snd_emu10k1_init_stereo_control(controls + i++, SNDRV_CTL_NAME_IEC958("TTL ",CAPTURE,VOLUME), gpr, 0); + snd_emu10k1_init_stereo_onoff_control(controls + i++, SNDRV_CTL_NAME_IEC958("TTL ",CAPTURE,SWITCH), gpr + 2, 0); gpr += 4; } @@ -1750,7 +1750,7 @@ static int __devinit _snd_emu10k1_init_efx(emu10k1_t *emu) /* IEC958 Optical Playback Volume */ for (z = 0; z < 2; z++) VOLUME_ADDIN(icode, &ptr, playback + z, EXTIN_TOSLINK_L + z, gpr + z); - snd_emu10k1_init_stereo_control(controls + i++, "IEC958 LiveDrive Playback Volume", gpr, 0); + snd_emu10k1_init_stereo_control(controls + i++, SNDRV_CTL_NAME_IEC958("LiveDrive ",PLAYBACK,VOLUME), gpr, 0); gpr += 2; /* IEC958 Optical Capture Volume */ @@ -1758,8 +1758,8 @@ static int __devinit _snd_emu10k1_init_efx(emu10k1_t *emu) SWITCH_IN(icode, &ptr, tmp + 0, EXTIN_TOSLINK_L + z, gpr + 2 + z); VOLUME_ADD(icode, &ptr, capture + z, tmp + 0, gpr + z); } - snd_emu10k1_init_stereo_control(controls + i++, "IEC958 LiveDrive Capture Volume", gpr, 0); - snd_emu10k1_init_stereo_onoff_control(controls + i++, "IEC958 LiveDrive Capture Switch", gpr + 2, 0); + snd_emu10k1_init_stereo_control(controls + i++, SNDRV_CTL_NAME_IEC958("LiveDrive ",CAPTURE,VOLUME), gpr, 0); + snd_emu10k1_init_stereo_onoff_control(controls + i++, SNDRV_CTL_NAME_IEC958("LiveDrive ",CAPTURE,SWITCH), gpr + 2, 0); gpr += 4; } @@ -1784,7 +1784,7 @@ static int __devinit _snd_emu10k1_init_efx(emu10k1_t *emu) /* IEC958 Coax Playback Volume */ for (z = 0; z < 2; z++) VOLUME_ADDIN(icode, &ptr, playback + z, EXTIN_COAX_SPDIF_L + z, gpr + z); - snd_emu10k1_init_stereo_control(controls + i++, "IEC958 Coaxial Playback Volume", gpr, 0); + snd_emu10k1_init_stereo_control(controls + i++, SNDRV_CTL_NAME_IEC958("Coaxial ",PLAYBACK,VOLUME), gpr, 0); gpr += 2; /* IEC958 Coax Capture Volume + Switch */ @@ -1792,8 +1792,8 @@ static int __devinit _snd_emu10k1_init_efx(emu10k1_t *emu) SWITCH_IN(icode, &ptr, tmp + 0, EXTIN_COAX_SPDIF_L + z, gpr + 2 + z); VOLUME_ADD(icode, &ptr, capture + z, tmp + 0, gpr + z); } - snd_emu10k1_init_stereo_control(controls + i++, "IEC958 Coaxial Capture Volume", gpr, 0); - snd_emu10k1_init_stereo_onoff_control(controls + i++, "IEC958 Coaxial Capture Switch", gpr + 2, 0); + snd_emu10k1_init_stereo_control(controls + i++, SNDRV_CTL_NAME_IEC958("Coaxial ",CAPTURE,VOLUME), gpr, 0); + snd_emu10k1_init_stereo_onoff_control(controls + i++, SNDRV_CTL_NAME_IEC958("Coaxial ",CAPTURE,SWITCH), gpr + 2, 0); gpr += 4; } @@ -1920,7 +1920,7 @@ static int __devinit _snd_emu10k1_init_efx(emu10k1_t *emu) #endif } - snd_emu10k1_init_stereo_onoff_control(controls + i++, "IEC958 Optical Raw Playback Switch", gpr, 0); + snd_emu10k1_init_stereo_onoff_control(controls + i++, SNDRV_CTL_NAME_IEC958("Optical Raw ",PLAYBACK,SWITCH), gpr, 0); gpr += 2; } diff --git a/sound/pci/ens1370.c b/sound/pci/ens1370.c index 0c64e65bee9..bc8272be003 100644 --- a/sound/pci/ens1370.c +++ b/sound/pci/ens1370.c @@ -1444,7 +1444,7 @@ static int snd_es1371_spdif_put(snd_kcontrol_t * kcontrol, snd_ctl_elem_value_t /* spdif controls */ static snd_kcontrol_new_t snd_es1371_mixer_spdif[] __devinitdata = { - ES1371_SPDIF("IEC958 Playback Switch"), + ES1371_SPDIF(SNDRV_CTL_NAME_IEC958("",PLAYBACK,SWITCH)), { .iface = SNDRV_CTL_ELEM_IFACE_MIXER, .name = SNDRV_CTL_NAME_IEC958("",PLAYBACK,DEFAULT), diff --git a/sound/pci/fm801.c b/sound/pci/fm801.c index ff10e637a95..36b2f62e857 100644 --- a/sound/pci/fm801.c +++ b/sound/pci/fm801.c @@ -1155,10 +1155,10 @@ FM801_SINGLE("FM Playback Switch", FM801_FM_VOL, 15, 1, 1), static snd_kcontrol_new_t snd_fm801_controls_multi[] __devinitdata = { FM801_SINGLE("AC97 2ch->4ch Copy Switch", FM801_CODEC_CTRL, 7, 1, 0), FM801_SINGLE("AC97 18-bit Switch", FM801_CODEC_CTRL, 10, 1, 0), -FM801_SINGLE("IEC958 Capture Switch", FM801_I2S_MODE, 8, 1, 0), -FM801_SINGLE("IEC958 Raw Data Playback Switch", FM801_I2S_MODE, 9, 1, 0), -FM801_SINGLE("IEC958 Raw Data Capture Switch", FM801_I2S_MODE, 10, 1, 0), -FM801_SINGLE("IEC958 Playback Switch", FM801_GEN_CTRL, 2, 1, 0), +FM801_SINGLE(SNDRV_CTL_NAME_IEC958("",CAPTURE,SWITCH), FM801_I2S_MODE, 8, 1, 0), +FM801_SINGLE(SNDRV_CTL_NAME_IEC958("Raw Data ",PLAYBACK,SWITCH), FM801_I2S_MODE, 9, 1, 0), +FM801_SINGLE(SNDRV_CTL_NAME_IEC958("Raw Data ",CAPTURE,SWITCH), FM801_I2S_MODE, 10, 1, 0), +FM801_SINGLE(SNDRV_CTL_NAME_IEC958("",PLAYBACK,SWITCH), FM801_GEN_CTRL, 2, 1, 0), }; static void snd_fm801_mixer_free_ac97_bus(ac97_bus_t *bus) diff --git a/sound/pci/hda/patch_analog.c b/sound/pci/hda/patch_analog.c index 2fd05bb8413..bceb83a42a3 100644 --- a/sound/pci/hda/patch_analog.c +++ b/sound/pci/hda/patch_analog.c @@ -572,7 +572,7 @@ static snd_kcontrol_new_t ad1983_mixers[] = { }, { .iface = SNDRV_CTL_ELEM_IFACE_MIXER, - .name = "IEC958 Playback Route", + .name = SNDRV_CTL_NAME_IEC958("",PLAYBACK,NONE) "Route", .info = ad1983_spdif_route_info, .get = ad1983_spdif_route_get, .put = ad1983_spdif_route_put, @@ -705,7 +705,7 @@ static snd_kcontrol_new_t ad1981_mixers[] = { /* identical with AD1983 */ { .iface = SNDRV_CTL_ELEM_IFACE_MIXER, - .name = "IEC958 Playback Route", + .name = SNDRV_CTL_NAME_IEC958("",PLAYBACK,NONE) "Route", .info = ad1983_spdif_route_info, .get = ad1983_spdif_route_get, .put = ad1983_spdif_route_put, diff --git a/sound/pci/ice1712/ice1712.c b/sound/pci/ice1712/ice1712.c index d51c72b721e..b97f50d10ba 100644 --- a/sound/pci/ice1712/ice1712.c +++ b/sound/pci/ice1712/ice1712.c @@ -1422,7 +1422,7 @@ static snd_kcontrol_new_t snd_ice1712_multi_capture_analog_switch __devinitdata static snd_kcontrol_new_t snd_ice1712_multi_capture_spdif_switch __devinitdata = { .iface = SNDRV_CTL_ELEM_IFACE_MIXER, - .name = "IEC958 Multi Capture Switch", + .name = SNDRV_CTL_NAME_IEC958("Multi ",CAPTURE,SWITCH), .info = snd_ice1712_pro_mixer_switch_info, .get = snd_ice1712_pro_mixer_switch_get, .put = snd_ice1712_pro_mixer_switch_put, @@ -1441,7 +1441,7 @@ static snd_kcontrol_new_t snd_ice1712_multi_capture_analog_volume __devinitdata static snd_kcontrol_new_t snd_ice1712_multi_capture_spdif_volume __devinitdata = { .iface = SNDRV_CTL_ELEM_IFACE_MIXER, - .name = "IEC958 Multi Capture Volume", + .name = SNDRV_CTL_NAME_IEC958("Multi ",CAPTURE,VOLUME), .info = snd_ice1712_pro_mixer_volume_info, .get = snd_ice1712_pro_mixer_volume_get, .put = snd_ice1712_pro_mixer_volume_put, @@ -2203,7 +2203,7 @@ static snd_kcontrol_new_t snd_ice1712_mixer_pro_analog_route __devinitdata = { static snd_kcontrol_new_t snd_ice1712_mixer_pro_spdif_route __devinitdata = { .iface = SNDRV_CTL_ELEM_IFACE_MIXER, - .name = "IEC958 Playback Route", + .name = SNDRV_CTL_NAME_IEC958("",PLAYBACK,NONE) "Route", .info = snd_ice1712_pro_route_info, .get = snd_ice1712_pro_route_spdif_get, .put = snd_ice1712_pro_route_spdif_put, diff --git a/sound/pci/ice1712/ice1724.c b/sound/pci/ice1712/ice1724.c index e819b9ffc26..c7af5e5fee1 100644 --- a/sound/pci/ice1712/ice1724.c +++ b/sound/pci/ice1712/ice1724.c @@ -1466,7 +1466,7 @@ static snd_kcontrol_new_t snd_vt1724_spdif_switch __devinitdata = .iface = SNDRV_CTL_ELEM_IFACE_MIXER, /* FIXME: the following conflict with IEC958 Playback Route */ // .name = SNDRV_CTL_NAME_IEC958("",PLAYBACK,SWITCH), - .name = "IEC958 Output Switch", + .name = SNDRV_CTL_NAME_IEC958("Output ",NONE,SWITCH), .info = snd_vt1724_spdif_sw_info, .get = snd_vt1724_spdif_sw_get, .put = snd_vt1724_spdif_sw_put diff --git a/sound/pci/via82xx.c b/sound/pci/via82xx.c index 6e1c29f5799..8ddc023a5b7 100644 --- a/sound/pci/via82xx.c +++ b/sound/pci/via82xx.c @@ -1484,7 +1484,7 @@ static int snd_via8233_dxs3_spdif_put(snd_kcontrol_t *kcontrol, snd_ctl_elem_val } static snd_kcontrol_new_t snd_via8233_dxs3_spdif_control __devinitdata = { - .name = "IEC958 Output Switch", + .name = SNDRV_CTL_NAME_IEC958("Output ",NONE,SWITCH), .iface = SNDRV_CTL_ELEM_IFACE_MIXER, .info = snd_via8233_dxs3_spdif_info, .get = snd_via8233_dxs3_spdif_get, -- cgit v1.2.3 From 5549d54992391d81a8cbfbaac45a958876fbc9cb Mon Sep 17 00:00:00 2001 From: Clemens Ladisch Date: Wed, 3 Aug 2005 13:50:30 +0200 Subject: [ALSA] use PCM interface for IEC958 controls Digigram VX core,ENS1370/1+ driver,CA0106 driver,EMU10K1/EMU10K2 driver RME HDSP driver,RME9652 driver For consistency, use the PCM interface instead of MIXER for IEC958 default/mask/stream mixer controls. Signed-off-by: Clemens Ladisch --- sound/drivers/vx/vx_mixer.c | 4 ++-- sound/pci/ca0106/ca0106_mixer.c | 4 ++-- sound/pci/emu10k1/emu10k1x.c | 4 ++-- sound/pci/emu10k1/emumixer.c | 8 ++++++-- sound/pci/ens1370.c | 6 +++--- sound/pci/rme9652/hdsp.c | 8 ++++---- sound/pci/rme9652/rme9652.c | 8 ++++---- 7 files changed, 23 insertions(+), 19 deletions(-) diff --git a/sound/drivers/vx/vx_mixer.c b/sound/drivers/vx/vx_mixer.c index f00c8888646..19fc68c2337 100644 --- a/sound/drivers/vx/vx_mixer.c +++ b/sound/drivers/vx/vx_mixer.c @@ -796,14 +796,14 @@ static int vx_iec958_put(snd_kcontrol_t *kcontrol, snd_ctl_elem_value_t *ucontro static snd_kcontrol_new_t vx_control_iec958_mask = { .access = SNDRV_CTL_ELEM_ACCESS_READ, - .iface = SNDRV_CTL_ELEM_IFACE_MIXER, + .iface = SNDRV_CTL_ELEM_IFACE_PCM, .name = SNDRV_CTL_NAME_IEC958("",PLAYBACK,MASK), .info = vx_iec958_info, /* shared */ .get = vx_iec958_mask_get, }; static snd_kcontrol_new_t vx_control_iec958 = { - .iface = SNDRV_CTL_ELEM_IFACE_MIXER, + .iface = SNDRV_CTL_ELEM_IFACE_PCM, .name = SNDRV_CTL_NAME_IEC958("",PLAYBACK,DEFAULT), .info = vx_iec958_info, .get = vx_iec958_get, diff --git a/sound/pci/ca0106/ca0106_mixer.c b/sound/pci/ca0106/ca0106_mixer.c index 0e5e9ce0ff2..b6b8882ce70 100644 --- a/sound/pci/ca0106/ca0106_mixer.c +++ b/sound/pci/ca0106/ca0106_mixer.c @@ -297,7 +297,7 @@ static int snd_ca0106_spdif_put(snd_kcontrol_t * kcontrol, static snd_kcontrol_new_t snd_ca0106_spdif_mask_control = { .access = SNDRV_CTL_ELEM_ACCESS_READ, - .iface = SNDRV_CTL_ELEM_IFACE_MIXER, + .iface = SNDRV_CTL_ELEM_IFACE_PCM, .name = SNDRV_CTL_NAME_IEC958("",PLAYBACK,MASK), .count = 4, .info = snd_ca0106_spdif_info, @@ -306,7 +306,7 @@ static snd_kcontrol_new_t snd_ca0106_spdif_mask_control = static snd_kcontrol_new_t snd_ca0106_spdif_control = { - .iface = SNDRV_CTL_ELEM_IFACE_MIXER, + .iface = SNDRV_CTL_ELEM_IFACE_PCM, .name = SNDRV_CTL_NAME_IEC958("",PLAYBACK,DEFAULT), .count = 4, .info = snd_ca0106_spdif_info, diff --git a/sound/pci/emu10k1/emu10k1x.c b/sound/pci/emu10k1/emu10k1x.c index e90c5ddd1d1..52c7826df44 100644 --- a/sound/pci/emu10k1/emu10k1x.c +++ b/sound/pci/emu10k1/emu10k1x.c @@ -1183,7 +1183,7 @@ static int snd_emu10k1x_spdif_put(snd_kcontrol_t * kcontrol, static snd_kcontrol_new_t snd_emu10k1x_spdif_mask_control = { .access = SNDRV_CTL_ELEM_ACCESS_READ, - .iface = SNDRV_CTL_ELEM_IFACE_MIXER, + .iface = SNDRV_CTL_ELEM_IFACE_PCM, .name = SNDRV_CTL_NAME_IEC958("",PLAYBACK,MASK), .count = 3, .info = snd_emu10k1x_spdif_info, @@ -1192,7 +1192,7 @@ static snd_kcontrol_new_t snd_emu10k1x_spdif_mask_control = static snd_kcontrol_new_t snd_emu10k1x_spdif_control = { - .iface = SNDRV_CTL_ELEM_IFACE_MIXER, + .iface = SNDRV_CTL_ELEM_IFACE_PCM, .name = SNDRV_CTL_NAME_IEC958("",PLAYBACK,DEFAULT), .count = 3, .info = snd_emu10k1x_spdif_info, diff --git a/sound/pci/emu10k1/emumixer.c b/sound/pci/emu10k1/emumixer.c index 279edaeb066..d71a72e84bc 100644 --- a/sound/pci/emu10k1/emumixer.c +++ b/sound/pci/emu10k1/emumixer.c @@ -181,7 +181,7 @@ static int snd_emu10k1_spdif_put(snd_kcontrol_t * kcontrol, static snd_kcontrol_new_t snd_emu10k1_spdif_mask_control = { .access = SNDRV_CTL_ELEM_ACCESS_READ, - .iface = SNDRV_CTL_ELEM_IFACE_MIXER, + .iface = SNDRV_CTL_ELEM_IFACE_PCM, .name = SNDRV_CTL_NAME_IEC958("",PLAYBACK,MASK), .count = 4, .info = snd_emu10k1_spdif_info, @@ -190,7 +190,7 @@ static snd_kcontrol_new_t snd_emu10k1_spdif_mask_control = static snd_kcontrol_new_t snd_emu10k1_spdif_control = { - .iface = SNDRV_CTL_ELEM_IFACE_MIXER, + .iface = SNDRV_CTL_ELEM_IFACE_PCM, .name = SNDRV_CTL_NAME_IEC958("",PLAYBACK,DEFAULT), .count = 4, .info = snd_emu10k1_spdif_info, @@ -931,10 +931,14 @@ int __devinit snd_emu10k1_mixer(emu10k1_t *emu, /* sb live! and audigy */ if ((kctl = snd_ctl_new1(&snd_emu10k1_spdif_mask_control, emu)) == NULL) return -ENOMEM; + if (!emu->audigy) + kctl->id.device = emu->pcm_efx->device; if ((err = snd_ctl_add(card, kctl))) return err; if ((kctl = snd_ctl_new1(&snd_emu10k1_spdif_control, emu)) == NULL) return -ENOMEM; + if (!emu->audigy) + kctl->id.device = emu->pcm_efx->device; if ((err = snd_ctl_add(card, kctl))) return err; } diff --git a/sound/pci/ens1370.c b/sound/pci/ens1370.c index bc8272be003..f06b95f41a1 100644 --- a/sound/pci/ens1370.c +++ b/sound/pci/ens1370.c @@ -1446,7 +1446,7 @@ static int snd_es1371_spdif_put(snd_kcontrol_t * kcontrol, snd_ctl_elem_value_t static snd_kcontrol_new_t snd_es1371_mixer_spdif[] __devinitdata = { ES1371_SPDIF(SNDRV_CTL_NAME_IEC958("",PLAYBACK,SWITCH)), { - .iface = SNDRV_CTL_ELEM_IFACE_MIXER, + .iface = SNDRV_CTL_ELEM_IFACE_PCM, .name = SNDRV_CTL_NAME_IEC958("",PLAYBACK,DEFAULT), .info = snd_ens1373_spdif_info, .get = snd_ens1373_spdif_default_get, @@ -1454,13 +1454,13 @@ static snd_kcontrol_new_t snd_es1371_mixer_spdif[] __devinitdata = { }, { .access = SNDRV_CTL_ELEM_ACCESS_READ, - .iface = SNDRV_CTL_ELEM_IFACE_MIXER, + .iface = SNDRV_CTL_ELEM_IFACE_PCM, .name = SNDRV_CTL_NAME_IEC958("",PLAYBACK,MASK), .info = snd_ens1373_spdif_info, .get = snd_ens1373_spdif_mask_get }, { - .iface = SNDRV_CTL_ELEM_IFACE_MIXER, + .iface = SNDRV_CTL_ELEM_IFACE_PCM, .name = SNDRV_CTL_NAME_IEC958("",PLAYBACK,PCM_STREAM), .info = snd_ens1373_spdif_info, .get = snd_ens1373_spdif_stream_get, diff --git a/sound/pci/rme9652/hdsp.c b/sound/pci/rme9652/hdsp.c index 60eef845a07..6694866089b 100644 --- a/sound/pci/rme9652/hdsp.c +++ b/sound/pci/rme9652/hdsp.c @@ -3104,7 +3104,7 @@ HDSP_XLR_BREAKOUT_CABLE("XLR Breakout Cable", 0) static snd_kcontrol_new_t snd_hdsp_controls[] = { { - .iface = SNDRV_CTL_ELEM_IFACE_MIXER, + .iface = SNDRV_CTL_ELEM_IFACE_PCM, .name = SNDRV_CTL_NAME_IEC958("",PLAYBACK,DEFAULT), .info = snd_hdsp_control_spdif_info, .get = snd_hdsp_control_spdif_get, @@ -3112,7 +3112,7 @@ static snd_kcontrol_new_t snd_hdsp_controls[] = { }, { .access = SNDRV_CTL_ELEM_ACCESS_READWRITE | SNDRV_CTL_ELEM_ACCESS_INACTIVE, - .iface = SNDRV_CTL_ELEM_IFACE_MIXER, + .iface = SNDRV_CTL_ELEM_IFACE_PCM, .name = SNDRV_CTL_NAME_IEC958("",PLAYBACK,PCM_STREAM), .info = snd_hdsp_control_spdif_stream_info, .get = snd_hdsp_control_spdif_stream_get, @@ -3120,7 +3120,7 @@ static snd_kcontrol_new_t snd_hdsp_controls[] = { }, { .access = SNDRV_CTL_ELEM_ACCESS_READ, - .iface = SNDRV_CTL_ELEM_IFACE_MIXER, + .iface = SNDRV_CTL_ELEM_IFACE_PCM, .name = SNDRV_CTL_NAME_IEC958("",PLAYBACK,CON_MASK), .info = snd_hdsp_control_spdif_mask_info, .get = snd_hdsp_control_spdif_mask_get, @@ -3130,7 +3130,7 @@ static snd_kcontrol_new_t snd_hdsp_controls[] = { }, { .access = SNDRV_CTL_ELEM_ACCESS_READ, - .iface = SNDRV_CTL_ELEM_IFACE_MIXER, + .iface = SNDRV_CTL_ELEM_IFACE_PCM, .name = SNDRV_CTL_NAME_IEC958("",PLAYBACK,PRO_MASK), .info = snd_hdsp_control_spdif_mask_info, .get = snd_hdsp_control_spdif_mask_get, diff --git a/sound/pci/rme9652/rme9652.c b/sound/pci/rme9652/rme9652.c index 6e3a91dba3e..8ee4d6fd6ea 100644 --- a/sound/pci/rme9652/rme9652.c +++ b/sound/pci/rme9652/rme9652.c @@ -1529,7 +1529,7 @@ static int snd_rme9652_get_tc_value(void *private_data, static snd_kcontrol_new_t snd_rme9652_controls[] = { { - .iface = SNDRV_CTL_ELEM_IFACE_MIXER, + .iface = SNDRV_CTL_ELEM_IFACE_PCM, .name = SNDRV_CTL_NAME_IEC958("",PLAYBACK,DEFAULT), .info = snd_rme9652_control_spdif_info, .get = snd_rme9652_control_spdif_get, @@ -1537,7 +1537,7 @@ static snd_kcontrol_new_t snd_rme9652_controls[] = { }, { .access = SNDRV_CTL_ELEM_ACCESS_READWRITE | SNDRV_CTL_ELEM_ACCESS_INACTIVE, - .iface = SNDRV_CTL_ELEM_IFACE_MIXER, + .iface = SNDRV_CTL_ELEM_IFACE_PCM, .name = SNDRV_CTL_NAME_IEC958("",PLAYBACK,PCM_STREAM), .info = snd_rme9652_control_spdif_stream_info, .get = snd_rme9652_control_spdif_stream_get, @@ -1545,7 +1545,7 @@ static snd_kcontrol_new_t snd_rme9652_controls[] = { }, { .access = SNDRV_CTL_ELEM_ACCESS_READ, - .iface = SNDRV_CTL_ELEM_IFACE_MIXER, + .iface = SNDRV_CTL_ELEM_IFACE_PCM, .name = SNDRV_CTL_NAME_IEC958("",PLAYBACK,CON_MASK), .info = snd_rme9652_control_spdif_mask_info, .get = snd_rme9652_control_spdif_mask_get, @@ -1555,7 +1555,7 @@ static snd_kcontrol_new_t snd_rme9652_controls[] = { }, { .access = SNDRV_CTL_ELEM_ACCESS_READ, - .iface = SNDRV_CTL_ELEM_IFACE_MIXER, + .iface = SNDRV_CTL_ELEM_IFACE_PCM, .name = SNDRV_CTL_NAME_IEC958("",PLAYBACK,PRO_MASK), .info = snd_rme9652_control_spdif_mask_info, .get = snd_rme9652_control_spdif_mask_get, -- cgit v1.2.3 From 5b8f7f7329289fa3b74ef8cdbaa9d2929787d3e6 Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Wed, 3 Aug 2005 14:02:47 +0200 Subject: [ALSA] ad1816a - Add clockfreq module option Documentation,AD1816A driver Added clockfreq module option for the card with a different clock frequency than 33kHz. Signed-off-by: Takashi Iwai --- include/sound/ad1816a.h | 1 + sound/isa/ad1816a/ad1816a.c | 5 +++++ sound/isa/ad1816a/ad1816a_lib.c | 14 ++++++++++---- 3 files changed, 16 insertions(+), 4 deletions(-) diff --git a/include/sound/ad1816a.h b/include/sound/ad1816a.h index 395978e375c..ca2e0e4fa93 100644 --- a/include/sound/ad1816a.h +++ b/include/sound/ad1816a.h @@ -138,6 +138,7 @@ struct _snd_ad1816a { spinlock_t lock; unsigned short mode; + unsigned int clock_freq; snd_card_t *card; snd_pcm_t *pcm; diff --git a/sound/isa/ad1816a/ad1816a.c b/sound/isa/ad1816a/ad1816a.c index 563296d0289..0eb442ca23d 100644 --- a/sound/isa/ad1816a/ad1816a.c +++ b/sound/isa/ad1816a/ad1816a.c @@ -53,6 +53,7 @@ static int irq[SNDRV_CARDS] = SNDRV_DEFAULT_IRQ; /* Pnp setup */ static int mpu_irq[SNDRV_CARDS] = SNDRV_DEFAULT_IRQ; /* Pnp setup */ static int dma1[SNDRV_CARDS] = SNDRV_DEFAULT_DMA; /* PnP setup */ static int dma2[SNDRV_CARDS] = SNDRV_DEFAULT_DMA; /* PnP setup */ +static int clockfreq[SNDRV_CARDS]; module_param_array(index, int, NULL, 0444); MODULE_PARM_DESC(index, "Index value for ad1816a based soundcard."); @@ -74,6 +75,8 @@ module_param_array(dma1, int, NULL, 0444); MODULE_PARM_DESC(dma1, "1st DMA # for ad1816a driver."); module_param_array(dma2, int, NULL, 0444); MODULE_PARM_DESC(dma2, "2nd DMA # for ad1816a driver."); +module_param_array(clockfreq, int, NULL, 0444); +MODULE_PARM_DESC(clockfreq, "Clock frequency for ad1816a driver (default = 0)."); struct snd_card_ad1816a { struct pnp_dev *dev; @@ -209,6 +212,8 @@ static int __devinit snd_card_ad1816a_probe(int dev, struct pnp_card_link *pcard snd_card_free(card); return error; } + if (clockfreq[dev] >= 5000 && clockfreq[dev] <= 100000) + chip->clock_freq = clockfreq[dev]; strcpy(card->driver, "AD1816A"); strcpy(card->shortname, "ADI SoundPort AD1816A"); diff --git a/sound/isa/ad1816a/ad1816a_lib.c b/sound/isa/ad1816a/ad1816a_lib.c index 625b2eff14a..ae860360ecf 100644 --- a/sound/isa/ad1816a/ad1816a_lib.c +++ b/sound/isa/ad1816a/ad1816a_lib.c @@ -234,7 +234,7 @@ static int snd_ad1816a_playback_prepare(snd_pcm_substream_t *substream) ad1816a_t *chip = snd_pcm_substream_chip(substream); unsigned long flags; snd_pcm_runtime_t *runtime = substream->runtime; - unsigned int size; + unsigned int size, rate; spin_lock_irqsave(&chip->lock, flags); @@ -245,7 +245,10 @@ static int snd_ad1816a_playback_prepare(snd_pcm_substream_t *substream) snd_dma_program(chip->dma1, runtime->dma_addr, size, DMA_MODE_WRITE | DMA_AUTOINIT); - snd_ad1816a_write(chip, AD1816A_PLAYBACK_SAMPLE_RATE, runtime->rate); + rate = runtime->rate; + if (chip->clock_freq) + rate = (rate * 33000) / chip->clock_freq; + snd_ad1816a_write(chip, AD1816A_PLAYBACK_SAMPLE_RATE, rate); snd_ad1816a_out_mask(chip, AD1816A_PLAYBACK_CONFIG, AD1816A_FMT_ALL | AD1816A_FMT_STEREO, snd_ad1816a_get_format(chip, runtime->format, @@ -263,7 +266,7 @@ static int snd_ad1816a_capture_prepare(snd_pcm_substream_t *substream) ad1816a_t *chip = snd_pcm_substream_chip(substream); unsigned long flags; snd_pcm_runtime_t *runtime = substream->runtime; - unsigned int size; + unsigned int size, rate; spin_lock_irqsave(&chip->lock, flags); @@ -274,7 +277,10 @@ static int snd_ad1816a_capture_prepare(snd_pcm_substream_t *substream) snd_dma_program(chip->dma2, runtime->dma_addr, size, DMA_MODE_READ | DMA_AUTOINIT); - snd_ad1816a_write(chip, AD1816A_CAPTURE_SAMPLE_RATE, runtime->rate); + rate = runtime->rate; + if (chip->clock_freq) + rate = (rate * 33000) / chip->clock_freq; + snd_ad1816a_write(chip, AD1816A_CAPTURE_SAMPLE_RATE, rate); snd_ad1816a_out_mask(chip, AD1816A_CAPTURE_CONFIG, AD1816A_FMT_ALL | AD1816A_FMT_STEREO, snd_ad1816a_get_format(chip, runtime->format, -- cgit v1.2.3 From 4a677ac5d0a4fad286cdfb4890a5e2de61534b1c Mon Sep 17 00:00:00 2001 From: Liam Girdwood Date: Fri, 5 Aug 2005 10:24:36 +0200 Subject: [ALSA] PXA27x AC97 warm reset ARM PXA2XX driver This patch extends the period of an AC97 warm reset on the PXA27x from 50uS to 500uS. The shorter reset didn't always guarantee that the codec would wake up. Changes:- o Change pxa27x warm reset period to 500uS o Removed double semi-colon. Signed-off-by: Liam Girdwood Signed-off-by: Takashi Iwai --- sound/arm/pxa2xx-ac97.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/sound/arm/pxa2xx-ac97.c b/sound/arm/pxa2xx-ac97.c index 46052304e23..b605a24946a 100644 --- a/sound/arm/pxa2xx-ac97.c +++ b/sound/arm/pxa2xx-ac97.c @@ -132,9 +132,9 @@ static void pxa2xx_ac97_reset(ac97_t *ac97) udelay(10); GCR |= GCR_WARM_RST; pxa_gpio_mode(113 | GPIO_ALT_FN_2_OUT); - udelay(50); + udelay(500); #else - GCR |= GCR_WARM_RST|GCR_PRIRDY_IEN|GCR_SECRDY_IEN;; + GCR |= GCR_WARM_RST|GCR_PRIRDY_IEN|GCR_SECRDY_IEN; wait_event_timeout(gsr_wq, gsr_bits & (GSR_PCR | GSR_SCR), 1); #endif -- cgit v1.2.3 From 064d2112ff24937f9aabb6baae8de88b6e5ef453 Mon Sep 17 00:00:00 2001 From: Liam Girdwood Date: Fri, 5 Aug 2005 10:25:08 +0200 Subject: [ALSA] WM9713 modem detection AC97 Codec This patch fixes a problem whereby the WM9713 has modem functionality incorrectly detected after an AC97 cold reset. Changes:- o Cleared AC97_SCAP_MODEM in wm9713 scaps Signed-off-by: Liam Girdwood Signed-off-by: Takashi Iwai --- sound/pci/ac97/ac97_patch.c | 1 + 1 file changed, 1 insertion(+) diff --git a/sound/pci/ac97/ac97_patch.c b/sound/pci/ac97/ac97_patch.c index 00fb5199246..a51b61d5066 100644 --- a/sound/pci/ac97/ac97_patch.c +++ b/sound/pci/ac97/ac97_patch.c @@ -786,6 +786,7 @@ int patch_wolfson13(ac97_t * ac97) ac97->flags |= AC97_HAS_NO_REC_GAIN | AC97_STEREO_MUTES | AC97_HAS_NO_PHONE | AC97_HAS_NO_PC_BEEP | AC97_HAS_NO_VIDEO | AC97_HAS_NO_CD | AC97_HAS_NO_TONE | AC97_HAS_NO_STD_PCM; + ac97->scaps &= ~AC97_SCAP_MODEM; snd_ac97_write_cache(ac97, AC97_EXTENDED_MID, 0xda00); snd_ac97_write_cache(ac97, AC97_EXTENDED_MSTATUS, 0x3810); -- cgit v1.2.3 From a55bfdc5821df787068da15a6864f2c669d7d22c Mon Sep 17 00:00:00 2001 From: Dirk Opfer Date: Mon, 8 Aug 2005 16:29:43 +0200 Subject: [ALSA] Fix compiler warnings in PXA2XX-AC97 ARM PXA2XX driver - change pxa2xx_ac97_do_suspend and pxa2xx_ac97_do_resume to use the expected arguments Signed-off-by: Dirk Opfer Signed-off-by: Takashi Iwai --- sound/arm/pxa2xx-ac97.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/sound/arm/pxa2xx-ac97.c b/sound/arm/pxa2xx-ac97.c index b605a24946a..29450befb5d 100644 --- a/sound/arm/pxa2xx-ac97.c +++ b/sound/arm/pxa2xx-ac97.c @@ -261,7 +261,7 @@ static int pxa2xx_ac97_do_suspend(snd_card_t *card, unsigned int state) return 0; } -static int pxa2xx_ac97_do_resume(snd_card_t *card, unsigned int state) +static int pxa2xx_ac97_do_resume(snd_card_t *card) { if (card->power_state != SNDRV_CTL_POWER_D0) { pxa2xx_audio_ops_t *platform_ops = card->dev->platform_data; @@ -275,13 +275,13 @@ static int pxa2xx_ac97_do_resume(snd_card_t *card, unsigned int state) return 0; } -static int pxa2xx_ac97_suspend(struct device *_dev, u32 state, u32 level) +static int pxa2xx_ac97_suspend(struct device *_dev, pm_message_t state, u32 level) { snd_card_t *card = dev_get_drvdata(_dev); int ret = 0; if (card && level == SUSPEND_DISABLE) - ret = pxa2xx_ac97_do_suspend(card, SNDRV_CTL_POWER_D3cold); + ret = pxa2xx_ac97_do_suspend(card, PMSG_SUSPEND); return ret; } @@ -292,7 +292,7 @@ static int pxa2xx_ac97_resume(struct device *_dev, u32 level) int ret = 0; if (card && level == RESUME_ENABLE) - ret = pxa2xx_ac97_do_resume(card, SNDRV_CTL_POWER_D0); + ret = pxa2xx_ac97_do_resume(card); return ret; } -- cgit v1.2.3 From 9bcf655109ae06a8e652671a0de6fe2da5c213c2 Mon Sep 17 00:00:00 2001 From: Clemens Ladisch Date: Wed, 10 Aug 2005 10:21:43 +0200 Subject: [ALSA] ymfpci: add per-voice volume controls YMFPCI driver Implements mixer controls for the volume of each playback substream of the main PCM device. Signed-off-by: Clemens Ladisch --- include/sound/ymfpci.h | 6 ++ sound/pci/ymfpci/ymfpci_main.c | 232 ++++++++++++++++++++++++++++------------- 2 files changed, 166 insertions(+), 72 deletions(-) diff --git a/include/sound/ymfpci.h b/include/sound/ymfpci.h index 4b570684a6a..9a3c1e6c820 100644 --- a/include/sound/ymfpci.h +++ b/include/sound/ymfpci.h @@ -295,6 +295,7 @@ struct _snd_ymfpci_pcm { unsigned int running: 1; unsigned int output_front: 1; unsigned int output_rear: 1; + unsigned int update_pcm_vol; u32 period_size; /* cached from runtime->period_size */ u32 buffer_size; /* cached from runtime->buffer_size */ u32 period_pos; @@ -367,6 +368,11 @@ struct _snd_ymfpci { int mode_dup4ch; int rear_opened; int spdif_opened; + struct { + u16 left; + u16 right; + snd_kcontrol_t *ctl; + } pcm_mixer[32]; spinlock_t reg_lock; spinlock_t voice_lock; diff --git a/sound/pci/ymfpci/ymfpci_main.c b/sound/pci/ymfpci/ymfpci_main.c index d54f88a1b52..054836412dc 100644 --- a/sound/pci/ymfpci/ymfpci_main.c +++ b/sound/pci/ymfpci/ymfpci_main.c @@ -321,6 +321,26 @@ static void snd_ymfpci_pcm_interrupt(ymfpci_t *chip, ymfpci_voice_t *voice) snd_pcm_period_elapsed(ypcm->substream); spin_lock(&chip->reg_lock); } + + if (unlikely(ypcm->update_pcm_vol)) { + unsigned int subs = ypcm->substream->number; + unsigned int next_bank = 1 - chip->active_bank; + snd_ymfpci_playback_bank_t *bank; + u32 volume; + + bank = &voice->bank[next_bank]; + volume = cpu_to_le32(chip->pcm_mixer[subs].left << 15); + bank->left_gain_end = volume; + if (ypcm->output_rear) + bank->eff2_gain_end = volume; + if (ypcm->voices[1]) + bank = &ypcm->voices[1]->bank[next_bank]; + volume = cpu_to_le32(chip->pcm_mixer[subs].right << 15); + bank->right_gain_end = volume; + if (ypcm->output_rear) + bank->eff3_gain_end = volume; + ypcm->update_pcm_vol--; + } } spin_unlock(&chip->reg_lock); } @@ -451,87 +471,74 @@ static int snd_ymfpci_pcm_voice_alloc(ymfpci_pcm_t *ypcm, int voices) return 0; } -static void snd_ymfpci_pcm_init_voice(ymfpci_voice_t *voice, int stereo, - int rate, int w_16, unsigned long addr, - unsigned int end, - int output_front, int output_rear) +static void snd_ymfpci_pcm_init_voice(ymfpci_pcm_t *ypcm, unsigned int voiceidx, + snd_pcm_runtime_t *runtime, + int has_pcm_volume) { + ymfpci_voice_t *voice = ypcm->voices[voiceidx]; u32 format; - u32 delta = snd_ymfpci_calc_delta(rate); - u32 lpfQ = snd_ymfpci_calc_lpfQ(rate); - u32 lpfK = snd_ymfpci_calc_lpfK(rate); + u32 delta = snd_ymfpci_calc_delta(runtime->rate); + u32 lpfQ = snd_ymfpci_calc_lpfQ(runtime->rate); + u32 lpfK = snd_ymfpci_calc_lpfK(runtime->rate); snd_ymfpci_playback_bank_t *bank; unsigned int nbank; + u32 vol_left, vol_right; + u8 use_left, use_right; snd_assert(voice != NULL, return); - format = (stereo ? 0x00010000 : 0) | (w_16 ? 0 : 0x80000000); + if (runtime->channels == 1) { + use_left = 1; + use_right = 1; + } else { + use_left = (voiceidx & 1) == 0; + use_right = !use_left; + } + if (has_pcm_volume) { + vol_left = cpu_to_le32(ypcm->chip->pcm_mixer + [ypcm->substream->number].left << 15); + vol_right = cpu_to_le32(ypcm->chip->pcm_mixer + [ypcm->substream->number].right << 15); + } else { + vol_left = cpu_to_le32(0x40000000); + vol_right = cpu_to_le32(0x40000000); + } + format = runtime->channels == 2 ? 0x00010000 : 0; + if (snd_pcm_format_width(runtime->format) == 8) + format |= 0x80000000; + if (runtime->channels == 2 && (voiceidx & 1) != 0) + format |= 1; for (nbank = 0; nbank < 2; nbank++) { bank = &voice->bank[nbank]; + memset(bank, 0, sizeof(*bank)); bank->format = cpu_to_le32(format); - bank->loop_default = 0; - bank->base = cpu_to_le32(addr); - bank->loop_start = 0; - bank->loop_end = cpu_to_le32(end); - bank->loop_frac = 0; - bank->eg_gain_end = cpu_to_le32(0x40000000); + bank->base = cpu_to_le32(runtime->dma_addr); + bank->loop_end = cpu_to_le32(ypcm->buffer_size); bank->lpfQ = cpu_to_le32(lpfQ); - bank->status = 0; - bank->num_of_frames = 0; - bank->loop_count = 0; - bank->start = 0; - bank->start_frac = 0; bank->delta = bank->delta_end = cpu_to_le32(delta); bank->lpfK = bank->lpfK_end = cpu_to_le32(lpfK); - bank->eg_gain = cpu_to_le32(0x40000000); - bank->lpfD1 = - bank->lpfD2 = 0; - - bank->left_gain = - bank->right_gain = - bank->left_gain_end = - bank->right_gain_end = - bank->eff1_gain = - bank->eff2_gain = - bank->eff3_gain = - bank->eff1_gain_end = - bank->eff2_gain_end = - bank->eff3_gain_end = 0; - - if (!stereo) { - if (output_front) { - bank->left_gain = + bank->eg_gain = + bank->eg_gain_end = cpu_to_le32(0x40000000); + + if (ypcm->output_front) { + if (use_left) { + bank->left_gain = + bank->left_gain_end = vol_left; + } + if (use_right) { bank->right_gain = - bank->left_gain_end = - bank->right_gain_end = cpu_to_le32(0x40000000); + bank->right_gain_end = vol_right; } - if (output_rear) { + } + if (ypcm->output_rear) { + if (use_left) { bank->eff2_gain = - bank->eff2_gain_end = - bank->eff3_gain = - bank->eff3_gain_end = cpu_to_le32(0x40000000); - } - } else { - if (output_front) { - if ((voice->number & 1) == 0) { - bank->left_gain = - bank->left_gain_end = cpu_to_le32(0x40000000); - } else { - bank->format |= cpu_to_le32(1); - bank->right_gain = - bank->right_gain_end = cpu_to_le32(0x40000000); - } + bank->eff2_gain_end = vol_left; } - if (output_rear) { - if ((voice->number & 1) == 0) { - bank->eff3_gain = - bank->eff3_gain_end = cpu_to_le32(0x40000000); - } else { - bank->format |= cpu_to_le32(1); - bank->eff2_gain = - bank->eff2_gain_end = cpu_to_le32(0x40000000); - } + if (use_right) { + bank->eff3_gain = + bank->eff3_gain_end = vol_right; } } } @@ -613,7 +620,7 @@ static int snd_ymfpci_playback_hw_free(snd_pcm_substream_t * substream) static int snd_ymfpci_playback_prepare(snd_pcm_substream_t * substream) { - // ymfpci_t *chip = snd_pcm_substream_chip(substream); + ymfpci_t *chip = snd_pcm_substream_chip(substream); snd_pcm_runtime_t *runtime = substream->runtime; ymfpci_pcm_t *ypcm = runtime->private_data; unsigned int nvoice; @@ -623,14 +630,8 @@ static int snd_ymfpci_playback_prepare(snd_pcm_substream_t * substream) ypcm->period_pos = 0; ypcm->last_pos = 0; for (nvoice = 0; nvoice < runtime->channels; nvoice++) - snd_ymfpci_pcm_init_voice(ypcm->voices[nvoice], - runtime->channels == 2, - runtime->rate, - snd_pcm_format_width(runtime->format) == 16, - runtime->dma_addr, - ypcm->buffer_size, - ypcm->output_front, - ypcm->output_rear); + snd_ymfpci_pcm_init_voice(ypcm, nvoice, runtime, + substream->pcm == chip->pcm); return 0; } @@ -882,6 +883,7 @@ static int snd_ymfpci_playback_open(snd_pcm_substream_t * substream) ymfpci_t *chip = snd_pcm_substream_chip(substream); snd_pcm_runtime_t *runtime = substream->runtime; ymfpci_pcm_t *ypcm; + snd_kcontrol_t *kctl; int err; if ((err = snd_ymfpci_playback_open_1(substream)) < 0) @@ -895,6 +897,10 @@ static int snd_ymfpci_playback_open(snd_pcm_substream_t * substream) chip->rear_opened++; } spin_unlock_irq(&chip->reg_lock); + + kctl = chip->pcm_mixer[substream->number].ctl; + kctl->vd[0].access &= ~SNDRV_CTL_ELEM_ACCESS_INACTIVE; + snd_ctl_notify(chip->card, SNDRV_CTL_EVENT_MASK_INFO, &kctl->id); return 0; } @@ -987,6 +993,7 @@ static int snd_ymfpci_playback_close(snd_pcm_substream_t * substream) { ymfpci_t *chip = snd_pcm_substream_chip(substream); ymfpci_pcm_t *ypcm = substream->runtime->private_data; + snd_kcontrol_t *kctl; spin_lock_irq(&chip->reg_lock); if (ypcm->output_rear && chip->rear_opened > 0) { @@ -994,6 +1001,9 @@ static int snd_ymfpci_playback_close(snd_pcm_substream_t * substream) ymfpci_close_extension(chip); } spin_unlock_irq(&chip->reg_lock); + kctl = chip->pcm_mixer[substream->number].ctl; + kctl->vd[0].access |= SNDRV_CTL_ELEM_ACCESS_INACTIVE; + snd_ctl_notify(chip->card, SNDRV_CTL_EVENT_MASK_INFO, &kctl->id); return snd_ymfpci_playback_close_1(substream); } @@ -1665,6 +1675,66 @@ static snd_kcontrol_new_t snd_ymfpci_rear_shared __devinitdata = { .private_value = 2, }; +/* + * PCM voice volume + */ + +static int snd_ymfpci_pcm_vol_info(snd_kcontrol_t *kcontrol, + snd_ctl_elem_info_t *uinfo) +{ + uinfo->type = SNDRV_CTL_ELEM_TYPE_INTEGER; + uinfo->count = 2; + uinfo->value.integer.min = 0; + uinfo->value.integer.max = 0x8000; + return 0; +} + +static int snd_ymfpci_pcm_vol_get(snd_kcontrol_t *kcontrol, + snd_ctl_elem_value_t *ucontrol) +{ + ymfpci_t *chip = snd_kcontrol_chip(kcontrol); + unsigned int subs = kcontrol->id.subdevice; + + ucontrol->value.integer.value[0] = chip->pcm_mixer[subs].left; + ucontrol->value.integer.value[1] = chip->pcm_mixer[subs].right; + return 0; +} + +static int snd_ymfpci_pcm_vol_put(snd_kcontrol_t *kcontrol, + snd_ctl_elem_value_t *ucontrol) +{ + ymfpci_t *chip = snd_kcontrol_chip(kcontrol); + unsigned int subs = kcontrol->id.subdevice; + snd_pcm_substream_t *substream; + unsigned long flags; + + if (ucontrol->value.integer.value[0] != chip->pcm_mixer[subs].left || + ucontrol->value.integer.value[1] != chip->pcm_mixer[subs].right) { + chip->pcm_mixer[subs].left = ucontrol->value.integer.value[0]; + chip->pcm_mixer[subs].right = ucontrol->value.integer.value[1]; + + substream = (snd_pcm_substream_t *)kcontrol->private_value; + spin_lock_irqsave(&chip->voice_lock, flags); + if (substream->runtime && substream->runtime->private_data) { + ymfpci_pcm_t *ypcm = substream->runtime->private_data; + ypcm->update_pcm_vol = 2; + } + spin_unlock_irqrestore(&chip->voice_lock, flags); + return 1; + } + return 0; +} + +static snd_kcontrol_new_t snd_ymfpci_pcm_volume __devinitdata = { + .iface = SNDRV_CTL_ELEM_IFACE_PCM, + .name = "PCM Playback Volume", + .access = SNDRV_CTL_ELEM_ACCESS_READWRITE | + SNDRV_CTL_ELEM_ACCESS_INACTIVE, + .info = snd_ymfpci_pcm_vol_info, + .get = snd_ymfpci_pcm_vol_get, + .put = snd_ymfpci_pcm_vol_put, +}; + /* * Mixer routines @@ -1686,6 +1756,7 @@ int __devinit snd_ymfpci_mixer(ymfpci_t *chip, int rear_switch) { ac97_template_t ac97; snd_kcontrol_t *kctl; + snd_pcm_substream_t *substream; unsigned int idx; int err; static ac97_bus_ops_t ops = { @@ -1739,6 +1810,23 @@ int __devinit snd_ymfpci_mixer(ymfpci_t *chip, int rear_switch) return err; } + /* per-voice volume */ + substream = chip->pcm->streams[SNDRV_PCM_STREAM_PLAYBACK].substream; + for (idx = 0; idx < 32; ++idx) { + kctl = snd_ctl_new1(&snd_ymfpci_pcm_volume, chip); + if (!kctl) + return -ENOMEM; + kctl->id.device = chip->pcm->device; + kctl->id.subdevice = idx; + kctl->private_value = (unsigned long)substream; + if ((err = snd_ctl_add(chip->card, kctl)) < 0) + return err; + chip->pcm_mixer[idx].left = 0x8000; + chip->pcm_mixer[idx].right = 0x8000; + chip->pcm_mixer[idx].ctl = kctl; + substream = substream->next; + } + return 0; } -- cgit v1.2.3 From 443feb882679e21ba5d1e0ff9eff067ac26d9461 Mon Sep 17 00:00:00 2001 From: Karsten Wiese Date: Wed, 10 Aug 2005 11:18:19 +0200 Subject: [ALSA] ALSA's struct _snd_pcm_substream: Obsolete open_flag PCM Midlevel,ALSA<-OSS emulation,USB USX2Y This patch removes open_flag from struct _snd_pcm_substream. All of its uses are substituted by querying struct _snd_pcm_substream's member ffile instead. Signed-off-by: Karsten Wiese Signed-off-by: Takashi Iwai --- include/sound/pcm.h | 1 - sound/core/oss/pcm_oss.c | 11 ++++------- sound/core/pcm_lib.c | 16 ++++++++++++++-- sound/core/pcm_native.c | 10 +++------- sound/usb/usx2y/usx2yhwdeppcm.c | 2 +- 5 files changed, 22 insertions(+), 18 deletions(-) diff --git a/include/sound/pcm.h b/include/sound/pcm.h index d935417575b..fa23ebfb857 100644 --- a/include/sound/pcm.h +++ b/include/sound/pcm.h @@ -379,7 +379,6 @@ struct _snd_pcm_substream { unsigned int dma_buf_id; size_t dma_max; /* -- hardware operations -- */ - unsigned int open_flag: 1; /* lowlevel device has been opened */ snd_pcm_ops_t *ops; /* -- runtime information -- */ snd_pcm_runtime_t *runtime; diff --git a/sound/core/oss/pcm_oss.c b/sound/core/oss/pcm_oss.c index de7444c586f..a13bd7bb4c9 100644 --- a/sound/core/oss/pcm_oss.c +++ b/sound/core/oss/pcm_oss.c @@ -1705,13 +1705,12 @@ static int snd_pcm_oss_release_file(snd_pcm_oss_file_t *pcm_oss_file) if (snd_pcm_running(substream)) snd_pcm_stop(substream, SNDRV_PCM_STATE_SETUP); snd_pcm_stream_unlock_irq(substream); - if (substream->open_flag) { + if (substream->ffile != NULL) { if (substream->ops->hw_free != NULL) substream->ops->hw_free(substream); substream->ops->close(substream); - substream->open_flag = 0; + substream->ffile = NULL; } - substream->ffile = NULL; snd_pcm_oss_release_substream(substream); snd_pcm_release_substream(substream); } @@ -1778,14 +1777,13 @@ static int snd_pcm_oss_open_file(struct file *file, snd_pcm_oss_release_file(pcm_oss_file); return err; } - psubstream->open_flag = 1; + psubstream->ffile = file; err = snd_pcm_hw_constraints_complete(psubstream); if (err < 0) { snd_printd("snd_pcm_hw_constraint_complete failed\n"); snd_pcm_oss_release_file(pcm_oss_file); return err; } - psubstream->ffile = file; snd_pcm_oss_init_substream(psubstream, psetup, minor); } if (csubstream != NULL) { @@ -1800,14 +1798,13 @@ static int snd_pcm_oss_open_file(struct file *file, snd_pcm_oss_release_file(pcm_oss_file); return err; } - csubstream->open_flag = 1; + csubstream->ffile = file; err = snd_pcm_hw_constraints_complete(csubstream); if (err < 0) { snd_printd("snd_pcm_hw_constraint_complete failed\n"); snd_pcm_oss_release_file(pcm_oss_file); return err; } - csubstream->ffile = file; snd_pcm_oss_init_substream(csubstream, csetup, minor); } diff --git a/sound/core/pcm_lib.c b/sound/core/pcm_lib.c index c5bfd0918cf..c41ec2e9f20 100644 --- a/sound/core/pcm_lib.c +++ b/sound/core/pcm_lib.c @@ -2063,7 +2063,7 @@ static snd_pcm_sframes_t snd_pcm_lib_write1(snd_pcm_substream_t *substream, if (((avail < runtime->control->avail_min && size > avail) || (size >= runtime->xfer_align && avail < runtime->xfer_align))) { wait_queue_t wait; - enum { READY, SIGNALED, ERROR, SUSPENDED, EXPIRED } state; + enum { READY, SIGNALED, ERROR, SUSPENDED, EXPIRED, DROPPED } state; long tout; if (nonblock) { @@ -2097,6 +2097,9 @@ static snd_pcm_sframes_t snd_pcm_lib_write1(snd_pcm_substream_t *substream, case SNDRV_PCM_STATE_SUSPENDED: state = SUSPENDED; goto _end_loop; + case SNDRV_PCM_STATE_SETUP: + state = DROPPED; + goto _end_loop; default: break; } @@ -2123,6 +2126,9 @@ static snd_pcm_sframes_t snd_pcm_lib_write1(snd_pcm_substream_t *substream, snd_printd("playback write error (DMA or IRQ trouble?)\n"); err = -EIO; goto _end_unlock; + case DROPPED: + err = -EBADFD; + goto _end_unlock; default: break; } @@ -2359,7 +2365,7 @@ static snd_pcm_sframes_t snd_pcm_lib_read1(snd_pcm_substream_t *substream, } else if ((avail < runtime->control->avail_min && size > avail) || (size >= runtime->xfer_align && avail < runtime->xfer_align)) { wait_queue_t wait; - enum { READY, SIGNALED, ERROR, SUSPENDED, EXPIRED } state; + enum { READY, SIGNALED, ERROR, SUSPENDED, EXPIRED, DROPPED } state; long tout; if (nonblock) { @@ -2394,6 +2400,9 @@ static snd_pcm_sframes_t snd_pcm_lib_read1(snd_pcm_substream_t *substream, goto _end_loop; case SNDRV_PCM_STATE_DRAINING: goto __draining; + case SNDRV_PCM_STATE_SETUP: + state = DROPPED; + goto _end_loop; default: break; } @@ -2420,6 +2429,9 @@ static snd_pcm_sframes_t snd_pcm_lib_read1(snd_pcm_substream_t *substream, snd_printd("capture read error (DMA or IRQ trouble?)\n"); err = -EIO; goto _end_unlock; + case DROPPED: + err = -EBADFD; + goto _end_unlock; default: break; } diff --git a/sound/core/pcm_native.c b/sound/core/pcm_native.c index 10c2c983264..5041be25d75 100644 --- a/sound/core/pcm_native.c +++ b/sound/core/pcm_native.c @@ -1967,13 +1967,12 @@ static int snd_pcm_release_file(snd_pcm_file_t * pcm_file) runtime = substream->runtime; str = substream->pstr; snd_pcm_unlink(substream); - if (substream->open_flag) { + if (substream->ffile != NULL) { if (substream->ops->hw_free != NULL) substream->ops->hw_free(substream); substream->ops->close(substream); - substream->open_flag = 0; + substream->ffile = NULL; } - substream->ffile = NULL; snd_pcm_remove_file(str, pcm_file); snd_pcm_release_substream(substream); kfree(pcm_file); @@ -2022,18 +2021,15 @@ static int snd_pcm_open_file(struct file *file, snd_pcm_release_file(pcm_file); return err; } - substream->open_flag = 1; + substream->ffile = file; err = snd_pcm_hw_constraints_complete(substream); if (err < 0) { snd_printd("snd_pcm_hw_constraints_complete failed\n"); - substream->ops->close(substream); snd_pcm_release_file(pcm_file); return err; } - substream->ffile = file; - file->private_data = pcm_file; *rpcm_file = pcm_file; return 0; diff --git a/sound/usb/usx2y/usx2yhwdeppcm.c b/sound/usb/usx2y/usx2yhwdeppcm.c index ef28061287f..d0199c4e555 100644 --- a/sound/usb/usx2y/usx2yhwdeppcm.c +++ b/sound/usb/usx2y/usx2yhwdeppcm.c @@ -624,7 +624,7 @@ static int usX2Y_pcms_lock_check(snd_card_t *card) for (s = 0; s < 2; ++s) { snd_pcm_substream_t *substream; substream = pcm->streams[s].substream; - if (substream && substream->open_flag) + if (substream && substream->ffile != NULL) err = -EBUSY; } } -- cgit v1.2.3 From 673b683a07272bdc1f757aa32784b9fcc4b3a014 Mon Sep 17 00:00:00 2001 From: Sasha Khapyorsky Date: Thu, 11 Aug 2005 11:00:16 +0200 Subject: ALSA CVS update HDA Codec driver,HDA generic driver Summar: hda-codec - MFG support This adds Modem Functional Group (MFG) support and option for 9600 sample rate. Signed-off-by: Sasha Khapyorsky Signed-off-by: Takashi Iwai --- sound/pci/hda/hda_codec.c | 28 ++++++++++++++++------------ sound/pci/hda/hda_codec.h | 1 + sound/pci/hda/hda_generic.c | 5 +++++ 3 files changed, 22 insertions(+), 12 deletions(-) diff --git a/sound/pci/hda/hda_codec.c b/sound/pci/hda/hda_codec.c index 026ae726d87..6bfb081d12d 100644 --- a/sound/pci/hda/hda_codec.c +++ b/sound/pci/hda/hda_codec.c @@ -432,22 +432,26 @@ void snd_hda_get_codec_name(struct hda_codec *codec, } /* - * look for an AFG node - * - * return 0 if not found + * look for an AFG and MFG nodes */ -static int look_for_afg_node(struct hda_codec *codec) +static void setup_fg_nodes(struct hda_codec *codec) { int i, total_nodes; hda_nid_t nid; total_nodes = snd_hda_get_sub_nodes(codec, AC_NODE_ROOT, &nid); for (i = 0; i < total_nodes; i++, nid++) { - if ((snd_hda_param_read(codec, nid, AC_PAR_FUNCTION_TYPE) & 0xff) == - AC_GRP_AUDIO_FUNCTION) - return nid; + switch((snd_hda_param_read(codec, nid, AC_PAR_FUNCTION_TYPE) & 0xff)) { + case AC_GRP_AUDIO_FUNCTION: + codec->afg = nid; + break; + case AC_GRP_MODEM_FUNCTION: + codec->mfg = nid; + break; + default: + break; + } } - return 0; } /* @@ -507,10 +511,9 @@ int snd_hda_codec_new(struct hda_bus *bus, unsigned int codec_addr, codec->subsystem_id = snd_hda_param_read(codec, AC_NODE_ROOT, AC_PAR_SUBSYSTEM_ID); codec->revision_id = snd_hda_param_read(codec, AC_NODE_ROOT, AC_PAR_REV_ID); - /* FIXME: support for multiple AFGs? */ - codec->afg = look_for_afg_node(codec); - if (! codec->afg) { - snd_printdd("hda_codec: no AFG node found\n"); + setup_fg_nodes(codec); + if (! codec->afg && ! codec->mfg) { + snd_printdd("hda_codec: no AFG or MFG node found\n"); snd_hda_codec_free(codec); return -ENODEV; } @@ -1163,6 +1166,7 @@ int snd_hda_build_controls(struct hda_bus *bus) static unsigned int rate_bits[][3] = { /* rate in Hz, ALSA rate bitmask, HDA format value */ { 8000, SNDRV_PCM_RATE_8000, 0x0500 }, /* 1/6 x 48 */ + { 9600, SNDRV_PCM_RATE_KNOT, 0x0400 }, /* 1/5 x 48 */ { 11025, SNDRV_PCM_RATE_11025, 0x4300 }, /* 1/4 x 44 */ { 16000, SNDRV_PCM_RATE_16000, 0x0200 }, /* 1/3 x 48 */ { 22050, SNDRV_PCM_RATE_22050, 0x4100 }, /* 1/2 x 44 */ diff --git a/sound/pci/hda/hda_codec.h b/sound/pci/hda/hda_codec.h index dd0d99d2ad2..63a29a8a286 100644 --- a/sound/pci/hda/hda_codec.h +++ b/sound/pci/hda/hda_codec.h @@ -514,6 +514,7 @@ struct hda_codec { struct list_head list; /* list point */ hda_nid_t afg; /* AFG node id */ + hda_nid_t mfg; /* MFG node id */ /* ids */ u32 vendor_id; diff --git a/sound/pci/hda/hda_generic.c b/sound/pci/hda/hda_generic.c index 2d046abb591..1229227af5b 100644 --- a/sound/pci/hda/hda_generic.c +++ b/sound/pci/hda/hda_generic.c @@ -881,6 +881,11 @@ int snd_hda_parse_generic_codec(struct hda_codec *codec) struct hda_gspec *spec; int err; + if(!codec->afg) { + snd_printdd("hda_generic: no generic modem yet\n"); + return -ENODEV; + } + spec = kcalloc(1, sizeof(*spec), GFP_KERNEL); if (spec == NULL) { printk(KERN_ERR "hda_generic: can't allocate spec\n"); -- cgit v1.2.3 From b65f824c1ea954ea2b974e42c064f72bfbfe3dd2 Mon Sep 17 00:00:00 2001 From: Sasha Khapyorsky Date: Thu, 11 Aug 2005 11:18:38 +0200 Subject: [ALSA] hda-codec - support for Si3054/5 HDA modems HDA generic driver,HDA Codec driver Support for Si3054/5 HDA modem codecs. Signed-off-by: Sasha Khapyorsky Signed-off-by: Takashi Iwai --- sound/pci/hda/Makefile | 2 +- sound/pci/hda/hda_patch.h | 3 + sound/pci/hda/patch_si3054.c | 300 +++++++++++++++++++++++++++++++++++++++++++ 3 files changed, 304 insertions(+), 1 deletion(-) create mode 100644 sound/pci/hda/patch_si3054.c diff --git a/sound/pci/hda/Makefile b/sound/pci/hda/Makefile index bd8cb33c4fb..ddfb5ff7fb8 100644 --- a/sound/pci/hda/Makefile +++ b/sound/pci/hda/Makefile @@ -1,5 +1,5 @@ snd-hda-intel-objs := hda_intel.o -snd-hda-codec-objs := hda_codec.o hda_generic.o patch_realtek.o patch_cmedia.o patch_analog.o patch_sigmatel.o +snd-hda-codec-objs := hda_codec.o hda_generic.o patch_realtek.o patch_cmedia.o patch_analog.o patch_sigmatel.o patch_si3054.o ifdef CONFIG_PROC_FS snd-hda-codec-objs += hda_proc.o endif diff --git a/sound/pci/hda/hda_patch.h b/sound/pci/hda/hda_patch.h index a5de684b694..acaef3c811b 100644 --- a/sound/pci/hda/hda_patch.h +++ b/sound/pci/hda/hda_patch.h @@ -10,11 +10,14 @@ extern struct hda_codec_preset snd_hda_preset_cmedia[]; extern struct hda_codec_preset snd_hda_preset_analog[]; /* SigmaTel codecs */ extern struct hda_codec_preset snd_hda_preset_sigmatel[]; +/* SiLabs 3054/3055 modem codecs */ +extern struct hda_codec_preset snd_hda_preset_si3054[]; static const struct hda_codec_preset *hda_preset_tables[] = { snd_hda_preset_realtek, snd_hda_preset_cmedia, snd_hda_preset_analog, snd_hda_preset_sigmatel, + snd_hda_preset_si3054, NULL }; diff --git a/sound/pci/hda/patch_si3054.c b/sound/pci/hda/patch_si3054.c new file mode 100644 index 00000000000..b0270d1b64c --- /dev/null +++ b/sound/pci/hda/patch_si3054.c @@ -0,0 +1,300 @@ +/* + * Universal Interface for Intel High Definition Audio Codec + * + * HD audio interface patch for Silicon Labs 3054/5 modem codec + * + * Copyright (c) 2005 Sasha Khapyorsky + * Takashi Iwai + * + * + * This driver is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This driver is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#include +#include +#include +#include +#include +#include +#include "hda_codec.h" +#include "hda_local.h" + + +/* si3054 verbs */ +#define SI3054_VERB_READ_NODE 0x900 +#define SI3054_VERB_WRITE_NODE 0x100 + +/* si3054 nodes (registers) */ +#define SI3054_EXTENDED_MID 2 +#define SI3054_LINE_RATE 3 +#define SI3054_LINE_LEVEL 4 +#define SI3054_GPIO_CFG 5 +#define SI3054_GPIO_POLARITY 6 +#define SI3054_GPIO_STICKY 7 +#define SI3054_GPIO_WAKEUP 8 +#define SI3054_GPIO_STATUS 9 +#define SI3054_GPIO_CONTROL 10 +#define SI3054_MISC_AFE 11 +#define SI3054_CHIPID 12 +#define SI3054_LINE_CFG1 13 +#define SI3054_LINE_STATUS 14 +#define SI3054_DC_TERMINATION 15 +#define SI3054_LINE_CONFIG 16 +#define SI3054_CALLPROG_ATT 17 +#define SI3054_SQ_CONTROL 18 +#define SI3054_MISC_CONTROL 19 +#define SI3054_RING_CTRL1 20 +#define SI3054_RING_CTRL2 21 + +/* extended MID */ +#define SI3054_MEI_READY 0xf + +/* line level */ +#define SI3054_ATAG_MASK 0x00f0 +#define SI3054_DTAG_MASK 0xf000 + +/* GPIO bits */ +#define SI3054_GPIO_OH 0x0001 +#define SI3054_GPIO_CID 0x0002 + +/* chipid and revisions */ +#define SI3054_CHIPID_CODEC_REV_MASK 0x000f +#define SI3054_CHIPID_DAA_REV_MASK 0x00f0 +#define SI3054_CHIPID_INTERNATIONAL 0x0100 +#define SI3054_CHIPID_DAA_ID 0x0f00 +#define SI3054_CHIPID_CODEC_ID (1<<12) + +/* si3054 codec registers (nodes) access macros */ +#define GET_REG(codec,reg) (snd_hda_codec_read(codec,reg,0,SI3054_VERB_READ_NODE,0)) +#define SET_REG(codec,reg,val) (snd_hda_codec_write(codec,reg,0,SI3054_VERB_WRITE_NODE,val)) + + +struct si3054_spec { + unsigned international; + struct hda_pcm pcm; +}; + + +/* + * Modem mixer + */ + +#define PRIVATE_VALUE(reg,mask) ((reg<<16)|(mask&0xffff)) +#define PRIVATE_REG(val) ((val>>16)&0xffff) +#define PRIVATE_MASK(val) (val&0xffff) + +static int si3054_switch_info(snd_kcontrol_t *kcontrol, + snd_ctl_elem_info_t *uinfo) +{ + uinfo->type = SNDRV_CTL_ELEM_TYPE_BOOLEAN; + uinfo->count = 1; + uinfo->value.integer.min = 0; + uinfo->value.integer.max = 1; + return 0; +} + +static int si3054_switch_get(snd_kcontrol_t *kcontrol, + snd_ctl_elem_value_t *uvalue) +{ + struct hda_codec *codec = snd_kcontrol_chip(kcontrol); + u16 reg = PRIVATE_REG(kcontrol->private_value); + u16 mask = PRIVATE_MASK(kcontrol->private_value); + uvalue->value.integer.value[0] = (GET_REG(codec, reg)) & mask ? 1 : 0 ; + return 0; +} + +static int si3054_switch_put(snd_kcontrol_t *kcontrol, + snd_ctl_elem_value_t *uvalue) +{ + struct hda_codec *codec = snd_kcontrol_chip(kcontrol); + u16 reg = PRIVATE_REG(kcontrol->private_value); + u16 mask = PRIVATE_MASK(kcontrol->private_value); + if (uvalue->value.integer.value[0]) + SET_REG(codec, reg, (GET_REG(codec, reg)) | mask); + else + SET_REG(codec, reg, (GET_REG(codec, reg)) & ~mask); + return 0; +} + +#define SI3054_KCONTROL(kname,reg,mask) { \ + .iface = SNDRV_CTL_ELEM_IFACE_MIXER, \ + .name = kname, \ + .info = si3054_switch_info, \ + .get = si3054_switch_get, \ + .put = si3054_switch_put, \ + .private_value = PRIVATE_VALUE(reg,mask), \ +} + + +static snd_kcontrol_new_t si3054_modem_mixer[] = { + SI3054_KCONTROL("Off-hook Switch", SI3054_GPIO_CONTROL, SI3054_GPIO_OH), + SI3054_KCONTROL("Caller ID Switch", SI3054_GPIO_CONTROL, SI3054_GPIO_CID), + {} +}; + +static int si3054_build_controls(struct hda_codec *codec) +{ + return snd_hda_add_new_ctls(codec, si3054_modem_mixer); +} + + +/* + * PCM callbacks + */ + +static int si3054_pcm_prepare(struct hda_pcm_stream *hinfo, + struct hda_codec *codec, + unsigned int stream_tag, + unsigned int format, + snd_pcm_substream_t *substream) +{ + u16 val; + + SET_REG(codec, SI3054_LINE_RATE, substream->runtime->rate); + val = GET_REG(codec, SI3054_LINE_LEVEL); + val &= 0xff << (8 * (substream->stream != SNDRV_PCM_STREAM_PLAYBACK)); + val |= ((stream_tag & 0xf) << 4) << (8 * (substream->stream == SNDRV_PCM_STREAM_PLAYBACK)); + SET_REG(codec, SI3054_LINE_LEVEL, val); + + snd_hda_codec_setup_stream(codec, hinfo->nid, + stream_tag, 0, format); + return 0; +} + +static int si3054_pcm_open(struct hda_pcm_stream *hinfo, + struct hda_codec *codec, + snd_pcm_substream_t *substream) +{ + static unsigned int rates[] = { 8000, 9600, 16000 }; + static snd_pcm_hw_constraint_list_t hw_constraints_rates = { + .count = ARRAY_SIZE(rates), + .list = rates, + .mask = 0, + }; + substream->runtime->hw.period_bytes_min = 80; + return snd_pcm_hw_constraint_list(substream->runtime, 0, + SNDRV_PCM_HW_PARAM_RATE, &hw_constraints_rates); +} + + +static struct hda_pcm_stream si3054_pcm = { + .substreams = 1, + .channels_min = 1, + .channels_max = 1, + .nid = 0x1, + .rates = SNDRV_PCM_RATE_8000|SNDRV_PCM_RATE_16000|SNDRV_PCM_RATE_KNOT, + .formats = SNDRV_PCM_FMTBIT_S16_LE, + .maxbps = 16, + .ops = { + .open = si3054_pcm_open, + .prepare = si3054_pcm_prepare, + }, +}; + + +static int si3054_build_pcms(struct hda_codec *codec) +{ + struct si3054_spec *spec = codec->spec; + struct hda_pcm *info = &spec->pcm; + si3054_pcm.nid = codec->mfg; + codec->num_pcms = 1; + codec->pcm_info = info; + info->name = "Si3054 Modem"; + info->stream[SNDRV_PCM_STREAM_PLAYBACK] = si3054_pcm; + info->stream[SNDRV_PCM_STREAM_CAPTURE] = si3054_pcm; + return 0; +} + + +/* + * Init part + */ + +static int si3054_init(struct hda_codec *codec) +{ + struct si3054_spec *spec = codec->spec; + unsigned wait_count; + u16 val; + + snd_hda_codec_write(codec, AC_NODE_ROOT, 0, AC_VERB_SET_CODEC_RESET, 0); + snd_hda_codec_write(codec, codec->mfg, 0, AC_VERB_SET_STREAM_FORMAT, 0); + SET_REG(codec, SI3054_LINE_RATE, 9600); + SET_REG(codec, SI3054_LINE_LEVEL, SI3054_DTAG_MASK|SI3054_ATAG_MASK); + SET_REG(codec, SI3054_EXTENDED_MID, 0); + + wait_count = 10; + do { + msleep(2); + val = GET_REG(codec, SI3054_EXTENDED_MID); + } while ((val & SI3054_MEI_READY) != SI3054_MEI_READY && wait_count--); + + if((val&SI3054_MEI_READY) != SI3054_MEI_READY) { + snd_printk(KERN_ERR "si3054: cannot initialize. EXT MID = %04x\n", val); + return -EACCES; + } + + SET_REG(codec, SI3054_GPIO_POLARITY, 0xffff); + SET_REG(codec, SI3054_GPIO_CFG, 0x0); + SET_REG(codec, SI3054_MISC_AFE, 0); + SET_REG(codec, SI3054_LINE_CFG1,0x200); + + if((GET_REG(codec,SI3054_LINE_STATUS) & (1<<6)) == 0) { + snd_printd("Link Frame Detect(FDT) is not ready (line status: %04x)\n", + GET_REG(codec,SI3054_LINE_STATUS)); + } + + spec->international = GET_REG(codec, SI3054_CHIPID) & SI3054_CHIPID_INTERNATIONAL; + + return 0; +} + +static void si3054_free(struct hda_codec *codec) +{ + kfree(codec->spec); +} + + +/* + */ + +static struct hda_codec_ops si3054_patch_ops = { + .build_controls = si3054_build_controls, + .build_pcms = si3054_build_pcms, + .init = si3054_init, + .free = si3054_free, +#ifdef CONFIG_PM + //.suspend = si3054_suspend, + .resume = si3054_init, +#endif +}; + +static int patch_si3054(struct hda_codec *codec) +{ + struct si3054_spec *spec = kcalloc(1, sizeof(*spec), GFP_KERNEL); + if (spec == NULL) + return -ENOMEM; + codec->spec = spec; + codec->patch_ops = si3054_patch_ops; + return 0; +} + +/* + * patch entries + */ +struct hda_codec_preset snd_hda_preset_si3054[] = { + { .id = 0x163c3155, .name = "Si3054", .patch = patch_si3054 }, + {} +}; + -- cgit v1.2.3 From a53fc188ec6fc406276799da465fe789c40d96b2 Mon Sep 17 00:00:00 2001 From: Clemens Ladisch Date: Thu, 11 Aug 2005 15:59:17 +0200 Subject: [ALSA] make local objects static Memalloc module,PCM Midlevel,Timer Midlevel,GUS Library,AC97 Codec ALI5451 driver,RME9652 driver Make some functions/variables that are used in only one file static. Signed-off-by: Clemens Ladisch --- sound/core/memalloc.c | 2 +- sound/core/pcm_lib.c | 4 ++-- sound/core/timer.c | 4 ++-- sound/isa/gus/gus_io.c | 6 ++++-- sound/pci/ac97/ac97_patch.c | 8 ++++---- sound/pci/ali5451/ali5451.c | 2 +- sound/pci/rme9652/hdspm.c | 4 ++-- 7 files changed, 16 insertions(+), 14 deletions(-) diff --git a/sound/core/memalloc.c b/sound/core/memalloc.c index 02132561c3f..371215cd9e8 100644 --- a/sound/core/memalloc.c +++ b/sound/core/memalloc.c @@ -512,7 +512,7 @@ static void free_all_reserved_pages(void) * proc file interface */ #define SND_MEM_PROC_FILE "driver/snd-page-alloc" -struct proc_dir_entry *snd_mem_proc; +static struct proc_dir_entry *snd_mem_proc; static int snd_mem_proc_read(char *page, char **start, off_t off, int count, int *eof, void *data) diff --git a/sound/core/pcm_lib.c b/sound/core/pcm_lib.c index c41ec2e9f20..0082914a7e3 100644 --- a/sound/core/pcm_lib.c +++ b/sound/core/pcm_lib.c @@ -1584,8 +1584,8 @@ int snd_pcm_hw_param_set(snd_pcm_t *pcm, snd_pcm_hw_params_t *params, return snd_pcm_hw_param_value(params, var, NULL); } -int _snd_pcm_hw_param_mask(snd_pcm_hw_params_t *params, - snd_pcm_hw_param_t var, const snd_mask_t *val) +static int _snd_pcm_hw_param_mask(snd_pcm_hw_params_t *params, + snd_pcm_hw_param_t var, const snd_mask_t *val) { int changed; assert(hw_is_mask(var)); diff --git a/sound/core/timer.c b/sound/core/timer.c index cfaccd415b3..c3997e04721 100644 --- a/sound/core/timer.c +++ b/sound/core/timer.c @@ -799,13 +799,13 @@ static int snd_timer_free(snd_timer_t *timer) return 0; } -int snd_timer_dev_free(snd_device_t *device) +static int snd_timer_dev_free(snd_device_t *device) { snd_timer_t *timer = device->device_data; return snd_timer_free(timer); } -int snd_timer_dev_register(snd_device_t *dev) +static int snd_timer_dev_register(snd_device_t *dev) { snd_timer_t *timer = dev->device_data; snd_timer_t *timer1; diff --git a/sound/isa/gus/gus_io.c b/sound/isa/gus/gus_io.c index 337b0e2a8a3..23e1b5f19e1 100644 --- a/sound/isa/gus/gus_io.c +++ b/sound/isa/gus/gus_io.c @@ -269,8 +269,9 @@ void snd_gf1_i_write_addr(snd_gus_card_t * gus, unsigned char reg, #endif /* 0 */ -unsigned int snd_gf1_i_read_addr(snd_gus_card_t * gus, - unsigned char reg, short w_16bit) +#ifdef CONFIG_SND_DEBUG +static unsigned int snd_gf1_i_read_addr(snd_gus_card_t * gus, + unsigned char reg, short w_16bit) { unsigned int res; unsigned long flags; @@ -280,6 +281,7 @@ unsigned int snd_gf1_i_read_addr(snd_gus_card_t * gus, spin_unlock_irqrestore(&gus->reg_lock, flags); return res; } +#endif /* diff --git a/sound/pci/ac97/ac97_patch.c b/sound/pci/ac97/ac97_patch.c index a51b61d5066..b0b31f4015a 100644 --- a/sound/pci/ac97/ac97_patch.c +++ b/sound/pci/ac97/ac97_patch.c @@ -375,7 +375,7 @@ AC97_DOUBLE("Front Playback Volume", AC97_WM97XX_FMIXER_VOL, 8, 0, 31, 1), AC97_SINGLE("Front Playback Switch", AC97_WM97XX_FMIXER_VOL, 15, 1, 1), }; -int patch_wolfson_wm9703_specific(ac97_t * ac97) +static int patch_wolfson_wm9703_specific(ac97_t * ac97) { /* This is known to work for the ViewSonic ViewPad 1000 * Randolph Bentson @@ -410,7 +410,7 @@ AC97_DOUBLE("Rear DAC Volume", AC97_WM9704_RPCM_VOL, 8, 0, 31, 1), AC97_DOUBLE("Surround Volume", AC97_SURROUND_MASTER, 8, 0, 31, 1), }; -int patch_wolfson_wm9704_specific(ac97_t * ac97) +static int patch_wolfson_wm9704_specific(ac97_t * ac97) { int err, i; for (i = 0; i < ARRAY_SIZE(wm9704_snd_ac97_controls); i++) { @@ -433,7 +433,7 @@ int patch_wolfson04(ac97_t * ac97) return 0; } -int patch_wolfson_wm9705_specific(ac97_t * ac97) +static int patch_wolfson_wm9705_specific(ac97_t * ac97) { int err, i; for (i = 0; i < ARRAY_SIZE(wm97xx_snd_ac97_controls); i++) { @@ -558,7 +558,7 @@ AC97_SINGLE("Headphone ZC Switch", AC97_HEADPHONE, 7, 1, 0), AC97_SINGLE("Mono ZC Switch", AC97_MASTER_MONO, 7, 1, 0), }; -int patch_wolfson_wm9711_specific(ac97_t * ac97) +static int patch_wolfson_wm9711_specific(ac97_t * ac97) { int err, i; diff --git a/sound/pci/ali5451/ali5451.c b/sound/pci/ali5451/ali5451.c index cb12d780a6c..ce6c9fadb59 100644 --- a/sound/pci/ali5451/ali5451.c +++ b/sound/pci/ali5451/ali5451.c @@ -1842,7 +1842,7 @@ static int __devinit snd_ali_pcm(ali_t * codec, int device, struct ali_pcm_descr return 0; } -struct ali_pcm_description ali_pcms[] = { +static struct ali_pcm_description ali_pcms[] = { { "ALI 5451", ALI_CHANNELS, 1, &snd_ali_playback_ops, &snd_ali_capture_ops }, { "ALI 5451 modem", 1, 1, &snd_ali_modem_playback_ops, &snd_ali_modem_capture_ops } }; diff --git a/sound/pci/rme9652/hdspm.c b/sound/pci/rme9652/hdspm.c index f6daec4e4d9..d4a0c2c56cd 100644 --- a/sound/pci/rme9652/hdspm.c +++ b/sound/pci/rme9652/hdspm.c @@ -1104,14 +1104,14 @@ static int snd_hdspm_midi_output_close(snd_rawmidi_substream_t * substream) return 0; } -snd_rawmidi_ops_t snd_hdspm_midi_output = +static snd_rawmidi_ops_t snd_hdspm_midi_output = { .open = snd_hdspm_midi_output_open, .close = snd_hdspm_midi_output_close, .trigger = snd_hdspm_midi_output_trigger, }; -snd_rawmidi_ops_t snd_hdspm_midi_input = +static snd_rawmidi_ops_t snd_hdspm_midi_input = { .open = snd_hdspm_midi_input_open, .close = snd_hdspm_midi_input_close, -- cgit v1.2.3 From 15a24c0778e9bdd48d8e1cf60a263837b5c30ed5 Mon Sep 17 00:00:00 2001 From: Clemens Ladisch Date: Fri, 12 Aug 2005 08:25:26 +0200 Subject: [ALSA] usb-audio: use 1 ms URBs when capturing USB generic driver When capturing audio data, we do not know beforehand how many samples the device sends per frame, so we have to use URBs that are as short as possible to make sure that we can handle period boundaries without any additional latencies. Furthermore, the total count of URBs submitted doesn't matter when capturing, so we can just use the maximum number. Signed-off-by: Clemens Ladisch --- sound/usb/usbaudio.c | 18 ++++++++++++------ 1 file changed, 12 insertions(+), 6 deletions(-) diff --git a/sound/usb/usbaudio.c b/sound/usb/usbaudio.c index 8298c462c29..9e38d3d1322 100644 --- a/sound/usb/usbaudio.c +++ b/sound/usb/usbaudio.c @@ -97,7 +97,7 @@ MODULE_PARM_DESC(async_unlink, "Use async unlink mode."); #define MAX_PACKS 10 #define MAX_PACKS_HS (MAX_PACKS * 8) /* in high speed mode */ -#define MAX_URBS 5 /* max. 20ms long packets */ +#define MAX_URBS 8 #define SYNC_URBS 4 /* always four urbs for sync */ #define MIN_PACKS_URB 1 /* minimum 1 packet per urb */ @@ -920,10 +920,12 @@ static int init_substream_urbs(snd_usb_substream_t *subs, unsigned int period_by else subs->curpacksize = maxsize; - if (snd_usb_get_speed(subs->dev) == USB_SPEED_FULL) + if (is_playback) urb_packs = nrpacks; else - urb_packs = (nrpacks * 8) >> subs->datainterval; + urb_packs = 1; + if (snd_usb_get_speed(subs->dev) == USB_SPEED_HIGH) + urb_packs = (urb_packs * 8) >> subs->datainterval; /* allocate a temporary buffer for playback */ if (is_playback) { @@ -935,9 +937,13 @@ static int init_substream_urbs(snd_usb_substream_t *subs, unsigned int period_by } /* decide how many packets to be used */ - total_packs = (period_bytes + maxsize - 1) / maxsize; - if (total_packs < 2 * MIN_PACKS_URB) - total_packs = 2 * MIN_PACKS_URB; + if (is_playback) { + total_packs = (period_bytes + maxsize - 1) / maxsize; + if (total_packs < 2 * MIN_PACKS_URB) + total_packs = 2 * MIN_PACKS_URB; + } else { + total_packs = MAX_URBS * urb_packs; + } subs->nurbs = (total_packs + urb_packs - 1) / urb_packs; if (subs->nurbs > MAX_URBS) { /* too much... */ -- cgit v1.2.3 From d6db392e9235c48bb945624798e9beede7b85b12 Mon Sep 17 00:00:00 2001 From: Clemens Ladisch Date: Fri, 12 Aug 2005 08:28:27 +0200 Subject: [ALSA] usb-audio: fix packets per URB calculation for playback USB generic driver When determining how many packets are needed for one period, we cannot assume that all packets have their maximum size -- we always use the nominal sample rate when sending data, and could use an even lower rate when the endpoint uses frequency feedback. Signed-off-by: Clemens Ladisch --- sound/usb/usbaudio.c | 10 +++++++++- 1 file changed, 9 insertions(+), 1 deletion(-) diff --git a/sound/usb/usbaudio.c b/sound/usb/usbaudio.c index 9e38d3d1322..d28106e390c 100644 --- a/sound/usb/usbaudio.c +++ b/sound/usb/usbaudio.c @@ -938,7 +938,15 @@ static int init_substream_urbs(snd_usb_substream_t *subs, unsigned int period_by /* decide how many packets to be used */ if (is_playback) { - total_packs = (period_bytes + maxsize - 1) / maxsize; + unsigned int minsize; + /* determine how small a packet can be */ + minsize = (subs->freqn >> (16 - subs->datainterval)) + * (frame_bits >> 3); + /* with sync from device, assume it can be 25% lower */ + if (subs->syncpipe) + minsize -= minsize >> 2; + minsize = max(minsize, 1u); + total_packs = (period_bytes + minsize - 1) / minsize; if (total_packs < 2 * MIN_PACKS_URB) total_packs = 2 * MIN_PACKS_URB; } else { -- cgit v1.2.3 From 71d848ca00a16179b17e58e5f51c2d9a6c4f97a2 Mon Sep 17 00:00:00 2001 From: Clemens Ladisch Date: Fri, 12 Aug 2005 15:18:00 +0200 Subject: [ALSA] usb-audio: make nrpacks parameter writeable USB generic driver The nrpacks module parameter is used only when initializing a playback stream, so it doesn't hurt to make it writeable. Signed-off-by: Clemens Ladisch --- sound/usb/usbaudio.c | 8 +++++--- 1 file changed, 5 insertions(+), 3 deletions(-) diff --git a/sound/usb/usbaudio.c b/sound/usb/usbaudio.c index d28106e390c..49075f06f84 100644 --- a/sound/usb/usbaudio.c +++ b/sound/usb/usbaudio.c @@ -79,7 +79,7 @@ module_param_array(vid, int, NULL, 0444); MODULE_PARM_DESC(vid, "Vendor ID for the USB audio device."); module_param_array(pid, int, NULL, 0444); MODULE_PARM_DESC(pid, "Product ID for the USB audio device."); -module_param(nrpacks, int, 0444); +module_param(nrpacks, int, 0644); MODULE_PARM_DESC(nrpacks, "Max. number of packets per URB."); module_param(async_unlink, bool, 0444); MODULE_PARM_DESC(async_unlink, "Use async unlink mode."); @@ -920,9 +920,11 @@ static int init_substream_urbs(snd_usb_substream_t *subs, unsigned int period_by else subs->curpacksize = maxsize; - if (is_playback) + if (is_playback) { urb_packs = nrpacks; - else + urb_packs = max(urb_packs, (unsigned int)MIN_PACKS_URB); + urb_packs = min(urb_packs, (unsigned int)MAX_PACKS); + } else urb_packs = 1; if (snd_usb_get_speed(subs->dev) == USB_SPEED_HIGH) urb_packs = (urb_packs * 8) >> subs->datainterval; -- cgit v1.2.3 From a93bf99077886d209f8e72bc134e1ceb36e76aa2 Mon Sep 17 00:00:00 2001 From: Clemens Ladisch Date: Fri, 12 Aug 2005 15:19:39 +0200 Subject: [ALSA] usb-audio: schedule high speed URBs with 1 ms alignment USB generic driver The EHCI driver doesn't interrupt more than once per millisecond, and organizes all iso transfers with frame-sized ITDs, so we can (try to) be more efficient by aligning all URBs on frame boundaries. Signed-off-by: Clemens Ladisch --- sound/usb/usbaudio.c | 20 ++++++++++++++------ 1 file changed, 14 insertions(+), 6 deletions(-) diff --git a/sound/usb/usbaudio.c b/sound/usb/usbaudio.c index 49075f06f84..a62d1313da1 100644 --- a/sound/usb/usbaudio.c +++ b/sound/usb/usbaudio.c @@ -893,7 +893,7 @@ static int init_substream_urbs(snd_usb_substream_t *subs, unsigned int period_by { unsigned int maxsize, n, i; int is_playback = subs->direction == SNDRV_PCM_STREAM_PLAYBACK; - unsigned int npacks[MAX_URBS], urb_packs, total_packs; + unsigned int npacks[MAX_URBS], urb_packs, total_packs, packs_per_ms; /* calculate the frequency in 16.16 format */ if (snd_usb_get_speed(subs->dev) == USB_SPEED_FULL) @@ -920,14 +920,18 @@ static int init_substream_urbs(snd_usb_substream_t *subs, unsigned int period_by else subs->curpacksize = maxsize; + if (snd_usb_get_speed(subs->dev) == USB_SPEED_HIGH) + packs_per_ms = 8 >> subs->datainterval; + else + packs_per_ms = 1; + if (is_playback) { urb_packs = nrpacks; urb_packs = max(urb_packs, (unsigned int)MIN_PACKS_URB); urb_packs = min(urb_packs, (unsigned int)MAX_PACKS); } else urb_packs = 1; - if (snd_usb_get_speed(subs->dev) == USB_SPEED_HIGH) - urb_packs = (urb_packs * 8) >> subs->datainterval; + urb_packs *= packs_per_ms; /* allocate a temporary buffer for playback */ if (is_playback) { @@ -949,8 +953,12 @@ static int init_substream_urbs(snd_usb_substream_t *subs, unsigned int period_by minsize -= minsize >> 2; minsize = max(minsize, 1u); total_packs = (period_bytes + minsize - 1) / minsize; - if (total_packs < 2 * MIN_PACKS_URB) - total_packs = 2 * MIN_PACKS_URB; + /* round up to multiple of packs_per_ms */ + total_packs = (total_packs + packs_per_ms - 1) + & ~(packs_per_ms - 1); + /* we need at least two URBs for queueing */ + if (total_packs < 2 * MIN_PACKS_URB * packs_per_ms) + total_packs = 2 * MIN_PACKS_URB * packs_per_ms; } else { total_packs = MAX_URBS * urb_packs; } @@ -972,7 +980,7 @@ static int init_substream_urbs(snd_usb_substream_t *subs, unsigned int period_by subs->nurbs = 2; npacks[0] = (total_packs + 1) / 2; npacks[1] = total_packs - npacks[0]; - } else if (npacks[subs->nurbs-1] < MIN_PACKS_URB) { + } else if (npacks[subs->nurbs-1] < MIN_PACKS_URB * packs_per_ms) { /* the last packet is too small.. */ if (subs->nurbs > 2) { /* merge to the first one */ -- cgit v1.2.3 From 47672310789431c16de22f16934febf4d55b4bb0 Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Fri, 12 Aug 2005 16:44:04 +0200 Subject: [ALSA] hda-intel - Add SiS966 support HDA Intel driver Added SiS966 pci id to snd-hda-intel driver. Signed-off-by: Takashi Iwai --- sound/pci/hda/hda_intel.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/sound/pci/hda/hda_intel.c b/sound/pci/hda/hda_intel.c index 288ab076483..2b6bd3139b8 100644 --- a/sound/pci/hda/hda_intel.c +++ b/sound/pci/hda/hda_intel.c @@ -71,7 +71,8 @@ MODULE_SUPPORTED_DEVICE("{{Intel, ICH6}," "{Intel, ESB2}," "{ATI, SB450}," "{VIA, VT8251}," - "{VIA, VT8237A}}"); + "{VIA, VT8237A}," + "{SiS, SIS966}}"); MODULE_DESCRIPTION("Intel HDA driver"); #define SFX "hda-intel: " @@ -1464,6 +1465,7 @@ static struct pci_device_id azx_ids[] = { { 0x8086, 0x269a, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0 }, /* ESB2 */ { 0x1002, 0x437b, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0 }, /* ATI SB450 */ { 0x1106, 0x3288, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0 }, /* VIA VT8251/VT8237A */ + { 0x1039, 0x7502, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0 }, /* SIS966 */ { 0x10b9, 0x5461, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0 }, /* ALI 5461? */ { 0, } }; -- cgit v1.2.3 From 4b4994869d68328276f6a3cc9df90cce8c82b43d Mon Sep 17 00:00:00 2001 From: Philip Prindeville Date: Fri, 12 Aug 2005 16:46:17 +0200 Subject: [ALSA] Add VT1617A codec support AC97 Codec Added (minimal) support of VT1617A codec with SPDIF. Signed-off-by: Takashi Iwai --- sound/pci/ac97/ac97_codec.c | 6 ++++-- sound/pci/ac97/ac97_patch.c | 18 ++++++++++++++---- sound/pci/ac97/ac97_patch.h | 1 + 3 files changed, 19 insertions(+), 6 deletions(-) diff --git a/sound/pci/ac97/ac97_codec.c b/sound/pci/ac97/ac97_codec.c index 33dba10f03e..600e053dfd3 100644 --- a/sound/pci/ac97/ac97_codec.c +++ b/sound/pci/ac97/ac97_codec.c @@ -157,6 +157,7 @@ static const ac97_codec_id_t snd_ac97_codec_ids[] = { { 0x54524123, 0xffffffff, "TR28602", NULL, NULL }, // only guess --jk [TR28023 = eMicro EM28023 (new CT1297)] { 0x54584e20, 0xffffffff, "TLC320AD9xC", NULL, NULL }, { 0x56494161, 0xffffffff, "VIA1612A", NULL, NULL }, // modified ICE1232 with S/PDIF +{ 0x56494170, 0xffffffff, "VIA1617A", patch_vt1617a, NULL }, // modified VT1616 with S/PDIF { 0x57454301, 0xffffffff, "W83971D", NULL, NULL }, { 0x574d4c00, 0xffffffff, "WM9701A", NULL, NULL }, { 0x574d4C03, 0xffffffff, "WM9703,WM9707,WM9708,WM9717", patch_wolfson03, NULL}, @@ -2580,8 +2581,6 @@ int snd_ac97_tune_hardware(ac97_t *ac97, struct ac97_quirk *quirk, const char *o { int result; - snd_assert(quirk, return -EINVAL); - /* quirk overriden? */ if (override && strcmp(override, "-1") && strcmp(override, "default")) { result = apply_quirk_str(ac97, override); @@ -2590,6 +2589,9 @@ int snd_ac97_tune_hardware(ac97_t *ac97, struct ac97_quirk *quirk, const char *o return result; } + if (! quirk) + return -EINVAL; + for (; quirk->subvendor; quirk++) { if (quirk->subvendor != ac97->subsystem_vendor) continue; diff --git a/sound/pci/ac97/ac97_patch.c b/sound/pci/ac97/ac97_patch.c index b0b31f4015a..a0d51553617 100644 --- a/sound/pci/ac97/ac97_patch.c +++ b/sound/pci/ac97/ac97_patch.c @@ -375,7 +375,7 @@ AC97_DOUBLE("Front Playback Volume", AC97_WM97XX_FMIXER_VOL, 8, 0, 31, 1), AC97_SINGLE("Front Playback Switch", AC97_WM97XX_FMIXER_VOL, 15, 1, 1), }; -static int patch_wolfson_wm9703_specific(ac97_t * ac97) +int patch_wolfson_wm9703_specific(ac97_t * ac97) { /* This is known to work for the ViewSonic ViewPad 1000 * Randolph Bentson @@ -410,7 +410,7 @@ AC97_DOUBLE("Rear DAC Volume", AC97_WM9704_RPCM_VOL, 8, 0, 31, 1), AC97_DOUBLE("Surround Volume", AC97_SURROUND_MASTER, 8, 0, 31, 1), }; -static int patch_wolfson_wm9704_specific(ac97_t * ac97) +int patch_wolfson_wm9704_specific(ac97_t * ac97) { int err, i; for (i = 0; i < ARRAY_SIZE(wm9704_snd_ac97_controls); i++) { @@ -433,7 +433,7 @@ int patch_wolfson04(ac97_t * ac97) return 0; } -static int patch_wolfson_wm9705_specific(ac97_t * ac97) +int patch_wolfson_wm9705_specific(ac97_t * ac97) { int err, i; for (i = 0; i < ARRAY_SIZE(wm97xx_snd_ac97_controls); i++) { @@ -558,7 +558,7 @@ AC97_SINGLE("Headphone ZC Switch", AC97_HEADPHONE, 7, 1, 0), AC97_SINGLE("Mono ZC Switch", AC97_MASTER_MONO, 7, 1, 0), }; -static int patch_wolfson_wm9711_specific(ac97_t * ac97) +int patch_wolfson_wm9711_specific(ac97_t * ac97) { int err, i; @@ -2665,6 +2665,16 @@ int patch_vt1616(ac97_t * ac97) return 0; } +/* + * VT1617A codec + */ +int patch_vt1617a(ac97_t * ac97) +{ + ac97->ext_id |= AC97_EI_SPDIF; /* force the detection of spdif */ + ac97->rates[AC97_RATES_SPDIF] = SNDRV_PCM_RATE_44100 | SNDRV_PCM_RATE_48000; + return 0; +} + /* */ static void it2646_update_jacks(ac97_t *ac97) diff --git a/sound/pci/ac97/ac97_patch.h b/sound/pci/ac97/ac97_patch.h index 7b7377d0f2a..ec181132010 100644 --- a/sound/pci/ac97/ac97_patch.h +++ b/sound/pci/ac97/ac97_patch.h @@ -56,5 +56,6 @@ int patch_cm9739(ac97_t * ac97); int patch_cm9761(ac97_t * ac97); int patch_cm9780(ac97_t * ac97); int patch_vt1616(ac97_t * ac97); +int patch_vt1617a(ac97_t * ac97); int patch_it2646(ac97_t * ac97); int mpatch_si3036(ac97_t * ac97); -- cgit v1.2.3 From f347c774c37c83e7b2d2b75d962ca40b9a283b2b Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Fri, 12 Aug 2005 16:47:49 +0200 Subject: [ALSA] via82xx - Add DXS entry for MSI K8MM-V VIA82xx driver Added the DXS entry for MSI K8MM-V. Also fixed a typo in last patch for Acer Aspire 1524 WLMi. Signed-off-by: Takashi Iwai --- sound/pci/via82xx.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/sound/pci/via82xx.c b/sound/pci/via82xx.c index 8ddc023a5b7..38b96eabea6 100644 --- a/sound/pci/via82xx.c +++ b/sound/pci/via82xx.c @@ -2153,7 +2153,7 @@ static int __devinit check_dxs_list(struct pci_dev *pci) { .subvendor = 0x1019, .subdevice = 0x0a81, .action = VIA_DXS_NO_VRA }, /* ECS K7VTA3 v8.0 */ { .subvendor = 0x1019, .subdevice = 0x0a85, .action = VIA_DXS_NO_VRA }, /* ECS L7VMM2 */ { .subvendor = 0x1025, .subdevice = 0x0033, .action = VIA_DXS_NO_VRA }, /* Acer Inspire 1353LM */ - { .subvendor = 0x1025, .subdevice = 0x0046, .action = VIA_DXS_SRC }, /* Acer Aspire 1524 WMLi */ + { .subvendor = 0x1025, .subdevice = 0x0046, .action = VIA_DXS_SRC }, /* Acer Aspire 1524 WLMi */ { .subvendor = 0x1043, .subdevice = 0x8095, .action = VIA_DXS_NO_VRA }, /* ASUS A7V8X (FIXME: possibly VIA_DXS_ENABLE?)*/ { .subvendor = 0x1043, .subdevice = 0x80a1, .action = VIA_DXS_NO_VRA }, /* ASUS A7V8-X */ { .subvendor = 0x1043, .subdevice = 0x80b0, .action = VIA_DXS_NO_VRA }, /* ASUS A7V600 & K8V*/ @@ -2173,6 +2173,7 @@ static int __devinit check_dxs_list(struct pci_dev *pci) { .subvendor = 0x1462, .subdevice = 0x5901, .action = VIA_DXS_NO_VRA }, /* MSI KT6 Delta-SR */ { .subvendor = 0x1462, .subdevice = 0x7023, .action = VIA_DXS_NO_VRA }, /* MSI K8T Neo2-FI */ { .subvendor = 0x1462, .subdevice = 0x7120, .action = VIA_DXS_ENABLE }, /* MSI KT4V */ + { .subvendor = 0x1462, .subdevice = 0x7142, .action = VIA_DXS_ENABLE }, /* MSI K8MM-V */ { .subvendor = 0x147b, .subdevice = 0x1401, .action = VIA_DXS_ENABLE }, /* ABIT KD7(-RAID) */ { .subvendor = 0x147b, .subdevice = 0x1411, .action = VIA_DXS_ENABLE }, /* ABIT VA-20 */ { .subvendor = 0x147b, .subdevice = 0x1413, .action = VIA_DXS_ENABLE }, /* ABIT KV8 Pro */ -- cgit v1.2.3 From 1265509cb0f00206c2ed93f120121dd818a3902d Mon Sep 17 00:00:00 2001 From: Jaroslav Kysela Date: Fri, 12 Aug 2005 17:24:24 +0200 Subject: [ALSA] opl3sa2 driver - added support for PnP BIOS devices OPL3SA2 driver The driver has been extended to support also PnP BIOS devices. The detection path is: 1) detect PnP BIOS devices 2) detect ISA PnP devices Signed-off-by: Jaroslav Kysela --- sound/isa/opl3sa2.c | 112 +++++++++++++++++++++++++++++++++++++++++----------- 1 file changed, 89 insertions(+), 23 deletions(-) diff --git a/sound/isa/opl3sa2.c b/sound/isa/opl3sa2.c index 95c7b3e5340..c4ebf57b9fc 100644 --- a/sound/isa/opl3sa2.c +++ b/sound/isa/opl3sa2.c @@ -145,6 +145,14 @@ static snd_card_t *snd_opl3sa2_legacy[SNDRV_CARDS] = SNDRV_DEFAULT_PTR; #ifdef CONFIG_PNP +static struct pnp_device_id snd_opl3sa2_pnpbiosids[] = { + { .id = "YMF0021" }, + { .id = "NMX2210" }, /* Gateway Solo 2500 */ + { .id = "" } /* end */ +}; + +MODULE_DEVICE_TABLE(pnp, snd_opl3sa2_pnpbiosids); + static struct pnp_card_device_id snd_opl3sa2_pnpids[] = { /* Yamaha YMF719E-S (Genius Sound Maker 3DX) */ { .id = "YMH0020", .devs = { { "YMH0021" } } }, @@ -568,20 +576,18 @@ static int snd_opl3sa2_resume(snd_card_t *card) #ifdef CONFIG_PNP static int __init snd_opl3sa2_pnp(int dev, opl3sa2_t *chip, - struct pnp_card_link *card, - const struct pnp_card_device_id *id) + struct pnp_dev *pdev, + int isapnp) { - struct pnp_dev *pdev; - struct pnp_resource_table * cfg = kmalloc(sizeof(struct pnp_resource_table), GFP_KERNEL); + struct pnp_resource_table * cfg; int err; + if (!isapnp && pnp_device_is_isapnp(pdev)) + return -ENOENT; /* we have another procedure - card */ + + cfg = kmalloc(sizeof(struct pnp_resource_table), GFP_KERNEL); if (!cfg) return -ENOMEM; - pdev = chip->dev = pnp_request_card_device(card, id->devs[0].id, NULL); - if (chip->dev == NULL) { - kfree(cfg); - return -EBUSY; - } /* PnP initialization */ pnp_init_resource_table(cfg); if (sb_port[dev] != SNDRV_AUTO_PORT) @@ -617,13 +623,31 @@ static int __init snd_opl3sa2_pnp(int dev, opl3sa2_t *chip, dma1[dev] = pnp_dma(pdev, 0); dma2[dev] = pnp_dma(pdev, 1); irq[dev] = pnp_irq(pdev, 0); - snd_printdd("PnP OPL3-SA: sb port=0x%lx, wss port=0x%lx, fm port=0x%lx, midi port=0x%lx\n", - sb_port[dev], wss_port[dev], fm_port[dev], midi_port[dev]); - snd_printdd("PnP OPL3-SA: control port=0x%lx, dma1=%i, dma2=%i, irq=%i\n", - port[dev], dma1[dev], dma2[dev], irq[dev]); + snd_printdd("%sPnP OPL3-SA: sb port=0x%lx, wss port=0x%lx, fm port=0x%lx, midi port=0x%lx\n", + pnp_device_is_pnpbios(pdev) ? "BIOS" : "ISA", sb_port[dev], wss_port[dev], fm_port[dev], midi_port[dev]); + snd_printdd("%sPnP OPL3-SA: control port=0x%lx, dma1=%i, dma2=%i, irq=%i\n", + pnp_device_is_pnpbios(pdev) ? "BIOS" : "ISA", port[dev], dma1[dev], dma2[dev], irq[dev]); kfree(cfg); + chip->dev = pdev; return 0; } + +static int __init snd_opl3sa2_cpnp(int dev, opl3sa2_t *chip, + struct pnp_card_link *card, + const struct pnp_card_device_id *id) +{ + struct pnp_dev *pdev; + struct pnp_resource_table * cfg = kmalloc(sizeof(struct pnp_resource_table), GFP_KERNEL); + + if (!cfg) + return -ENOMEM; + pdev = pnp_request_card_device(card, id->devs[0].id, NULL); + if (pdev == NULL) { + kfree(cfg); + return -EBUSY; + } + return snd_opl3sa2_pnp(dev, chip, pdev, 1); +} #endif /* CONFIG_PNP */ static int snd_opl3sa2_free(opl3sa2_t *chip) @@ -645,6 +669,7 @@ static int snd_opl3sa2_dev_free(snd_device_t *device) } static int __devinit snd_opl3sa2_probe(int dev, + struct pnp_dev *pdev, struct pnp_card_link *pcard, const struct pnp_card_device_id *pid) { @@ -695,8 +720,13 @@ static int __devinit snd_opl3sa2_probe(int dev, if ((err = snd_device_new(card, SNDRV_DEV_LOWLEVEL, chip, &ops)) < 0) goto __error; #ifdef CONFIG_PNP - if (isapnp[dev]) { - if ((err = snd_opl3sa2_pnp(dev, chip, pcard, pid)) < 0) + if (pdev) { + if ((err = snd_opl3sa2_pnp(dev, chip, pdev, 0)) < 0) + goto __error; + snd_card_set_dev(card, &pdev->dev); + } + if (pcard) { + if ((err = snd_opl3sa2_cpnp(dev, chip, pcard, pid)) < 0) goto __error; snd_card_set_dev(card, &pcard->card->dev); } @@ -768,7 +798,9 @@ static int __devinit snd_opl3sa2_probe(int dev, if ((err = snd_card_register(card)) < 0) goto __error; - if (pcard) + if (pdev) + pnp_set_drvdata(pdev, card); + else if (pcard) pnp_set_card_drvdata(pcard, card); else snd_opl3sa2_legacy[dev] = card; @@ -780,8 +812,41 @@ static int __devinit snd_opl3sa2_probe(int dev, } #ifdef CONFIG_PNP -static int __devinit snd_opl3sa2_pnp_detect(struct pnp_card_link *card, - const struct pnp_card_device_id *id) +static int __devinit snd_opl3sa2_pnp_detect(struct pnp_dev *pdev, + const struct pnp_device_id *id) +{ + static int dev; + int res; + + for ( ; dev < SNDRV_CARDS; dev++) { + if (!enable[dev] || !isapnp[dev]) + continue; + res = snd_opl3sa2_probe(dev, pdev, NULL, NULL); + if (res < 0) + return res; + dev++; + return 0; + } + return -ENODEV; +} + +static void __devexit snd_opl3sa2_pnp_remove(struct pnp_dev * pdev) +{ + snd_card_t *card = (snd_card_t *) pnp_get_drvdata(pdev); + + snd_card_disconnect(card); + snd_card_free_in_thread(card); +} + +static struct pnp_driver opl3sa2_pnp_driver = { + .name = "opl3sa2", + .id_table = snd_opl3sa2_pnpbiosids, + .probe = snd_opl3sa2_pnp_detect, + .remove = __devexit_p(snd_opl3sa2_pnp_remove), +}; + +static int __devinit snd_opl3sa2_pnp_cdetect(struct pnp_card_link *card, + const struct pnp_card_device_id *id) { static int dev; int res; @@ -789,7 +854,7 @@ static int __devinit snd_opl3sa2_pnp_detect(struct pnp_card_link *card, for ( ; dev < SNDRV_CARDS; dev++) { if (!enable[dev] || !isapnp[dev]) continue; - res = snd_opl3sa2_probe(dev, card, id); + res = snd_opl3sa2_probe(dev, NULL, card, id); if (res < 0) return res; dev++; @@ -798,7 +863,7 @@ static int __devinit snd_opl3sa2_pnp_detect(struct pnp_card_link *card, return -ENODEV; } -static void __devexit snd_opl3sa2_pnp_remove(struct pnp_card_link * pcard) +static void __devexit snd_opl3sa2_pnp_cremove(struct pnp_card_link * pcard) { snd_card_t *card = (snd_card_t *) pnp_get_card_drvdata(pcard); @@ -810,8 +875,8 @@ static struct pnp_card_driver opl3sa2_pnpc_driver = { .flags = PNP_DRIVER_RES_DISABLE, .name = "opl3sa2", .id_table = snd_opl3sa2_pnpids, - .probe = snd_opl3sa2_pnp_detect, - .remove = __devexit_p(snd_opl3sa2_pnp_remove), + .probe = snd_opl3sa2_pnp_cdetect, + .remove = __devexit_p(snd_opl3sa2_pnp_cremove), }; #endif /* CONFIG_PNP */ @@ -826,10 +891,11 @@ static int __init alsa_card_opl3sa2_init(void) if (isapnp[dev]) continue; #endif - if (snd_opl3sa2_probe(dev, NULL, NULL) >= 0) + if (snd_opl3sa2_probe(dev, NULL, NULL, NULL) >= 0) cards++; } #ifdef CONFIG_PNP + cards += pnp_register_driver(&opl3sa2_pnp_driver); cards += pnp_register_card_driver(&opl3sa2_pnpc_driver); #endif if (!cards) { -- cgit v1.2.3 From 53b266632b79e2adc48754d5a6e9e5ebbde08c12 Mon Sep 17 00:00:00 2001 From: Jaroslav Kysela Date: Fri, 12 Aug 2005 17:35:09 +0200 Subject: [ALSA] opl3sa2 - fixed typo in PnP BIOS IDs (YMF0021 -> YMH0021) OPL3SA2 driver Signed-off-by: Jaroslav Kysela --- sound/isa/opl3sa2.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/sound/isa/opl3sa2.c b/sound/isa/opl3sa2.c index c4ebf57b9fc..bb5406cf0a1 100644 --- a/sound/isa/opl3sa2.c +++ b/sound/isa/opl3sa2.c @@ -146,7 +146,7 @@ static snd_card_t *snd_opl3sa2_legacy[SNDRV_CARDS] = SNDRV_DEFAULT_PTR; #ifdef CONFIG_PNP static struct pnp_device_id snd_opl3sa2_pnpbiosids[] = { - { .id = "YMF0021" }, + { .id = "YMH0021" }, { .id = "NMX2210" }, /* Gateway Solo 2500 */ { .id = "" } /* end */ }; -- cgit v1.2.3 From 1b05962e8b2d8a1b1f5934087a4a00f7532fa2d1 Mon Sep 17 00:00:00 2001 From: James Courtier-Dutton Date: Fri, 12 Aug 2005 23:50:13 +0200 Subject: [ALSA] Add new ID. Fixes ALSA bug #1298 CA0106 driver Signed-off-by: James Courtier-Dutton --- sound/pci/ca0106/ca0106_main.c | 8 ++++++++ 1 file changed, 8 insertions(+) diff --git a/sound/pci/ca0106/ca0106_main.c b/sound/pci/ca0106/ca0106_main.c index 95c28928426..7e27bfc3743 100644 --- a/sound/pci/ca0106/ca0106_main.c +++ b/sound/pci/ca0106/ca0106_main.c @@ -188,6 +188,14 @@ static ca0106_details_t ca0106_chip_details[] = { .name = "MSI K8N Diamond MB [SB0438]", .gpio_type = 1, .i2c_adc = 1 } , + /* Shuttle XPC SD31P which has an onboard Creative Labs Sound Blaster Live! 24-bit EAX + * high-definition 7.1 audio processor". + * Added using info from andrewvegan in alsa bug #1298 + */ + { .serial = 0x30381297, + .name = "Shuttle XPC SD31P [SD31P]", + .gpio_type = 1, + .i2c_adc = 1 } , { .serial = 0, .name = "AudigyLS [Unknown]" } }; -- cgit v1.2.3 From 99250872fc619bb5b5ddddcf1c58714a774526fc Mon Sep 17 00:00:00 2001 From: James Courtier-Dutton Date: Fri, 12 Aug 2005 23:54:58 +0200 Subject: [ALSA] Add new card ID. Fixes ALSA bug #1297 EMU10K1/EMU10K2 driver Signed-off-by: James Courtier-Dutton --- sound/pci/emu10k1/emu10k1_main.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/sound/pci/emu10k1/emu10k1_main.c b/sound/pci/emu10k1/emu10k1_main.c index 746b51ef396..c0b67b70e34 100644 --- a/sound/pci/emu10k1/emu10k1_main.c +++ b/sound/pci/emu10k1/emu10k1_main.c @@ -747,11 +747,11 @@ static emu_chip_details_t emu_chip_details[] = { .emu10k1_chip = 1, .ac97_chip = 1, .sblive51 = 1} , + /* Tested by alsa bugtrack user "hus" 12th Sept 2005 */ {.vendor = 0x1102, .device = 0x0002, .subsystem = 0x80611102, .driver = "EMU10K1", .name = "SBLive! Player 5.1 [SB0060]", .id = "Live", .emu10k1_chip = 1, - .ac97_chip = 1, .sblive51 = 1} , {.vendor = 0x1102, .device = 0x0002, .subsystem = 0x80511102, .driver = "EMU10K1", .name = "SBLive! Value [CT4850]", -- cgit v1.2.3 From b263a9bdf9394062a4fc4272ebed60de331c5490 Mon Sep 17 00:00:00 2001 From: Clemens Ladisch Date: Mon, 15 Aug 2005 08:22:39 +0200 Subject: [ALSA] usb-audio: optimize handling of capture URBs USB generic driver When preparing capture URBs, we don't need to stop when we cross a period boundary because we now never handle more than one millisecond of data per URB anyway. When handling captured data, use an extra flag to call snd_pcm_period_elapsed() no more than once. This allows us to move the period boundary checking code before the copying of the data which avoids a second locking of the substream's lock. Signed-off-by: Clemens Ladisch --- sound/usb/usbaudio.c | 26 ++++++++------------------ 1 file changed, 8 insertions(+), 18 deletions(-) diff --git a/sound/usb/usbaudio.c b/sound/usb/usbaudio.c index a62d1313da1..a703d96bfcb 100644 --- a/sound/usb/usbaudio.c +++ b/sound/usb/usbaudio.c @@ -311,27 +311,18 @@ static int prepare_capture_urb(snd_usb_substream_t *subs, struct urb *urb) { int i, offs; - unsigned long flags; snd_urb_ctx_t *ctx = (snd_urb_ctx_t *)urb->context; offs = 0; urb->dev = ctx->subs->dev; /* we need to set this at each time */ - urb->number_of_packets = 0; - spin_lock_irqsave(&subs->lock, flags); for (i = 0; i < ctx->packets; i++) { urb->iso_frame_desc[i].offset = offs; urb->iso_frame_desc[i].length = subs->curpacksize; offs += subs->curpacksize; - urb->number_of_packets++; - subs->transfer_sched += subs->curframesize; - if (subs->transfer_sched >= runtime->period_size) { - subs->transfer_sched -= runtime->period_size; - break; - } } - spin_unlock_irqrestore(&subs->lock, flags); urb->transfer_buffer = ctx->buf; urb->transfer_buffer_length = offs; + urb->number_of_packets = ctx->packets; #if 0 // for check if (! urb->bandwidth) { int bustime; @@ -359,6 +350,7 @@ static int retire_capture_urb(snd_usb_substream_t *subs, unsigned char *cp; int i; unsigned int stride, len, oldptr; + int period_elapsed = 0; stride = runtime->frame_bits >> 3; @@ -378,6 +370,10 @@ static int retire_capture_urb(snd_usb_substream_t *subs, if (subs->hwptr_done >= runtime->buffer_size) subs->hwptr_done -= runtime->buffer_size; subs->transfer_done += len; + if (subs->transfer_done >= runtime->period_size) { + subs->transfer_done -= runtime->period_size; + period_elapsed = 1; + } spin_unlock_irqrestore(&subs->lock, flags); /* copy a data chunk */ if (oldptr + len > runtime->buffer_size) { @@ -388,15 +384,9 @@ static int retire_capture_urb(snd_usb_substream_t *subs, } else { memcpy(runtime->dma_area + oldptr * stride, cp, len * stride); } - /* update the pointer, call callback if necessary */ - spin_lock_irqsave(&subs->lock, flags); - if (subs->transfer_done >= runtime->period_size) { - subs->transfer_done -= runtime->period_size; - spin_unlock_irqrestore(&subs->lock, flags); - snd_pcm_period_elapsed(subs->pcm_substream); - } else - spin_unlock_irqrestore(&subs->lock, flags); } + if (period_elapsed) + snd_pcm_period_elapsed(subs->pcm_substream); return 0; } -- cgit v1.2.3 From 7efd8bc800324a967a37e8a425433468b7f06adb Mon Sep 17 00:00:00 2001 From: Clemens Ladisch Date: Mon, 15 Aug 2005 08:24:44 +0200 Subject: [ALSA] usb-audio: double-buffer all playback data USB generic driver We always had to use double buffering when capturing, and when playback data for one URB crosses a buffer boundary. The latter would make hwptr updates less precise because the double-buffered data is read from the buffer much earlier than the other data is read by the host controller. Double-buffering all data allows to update hwptr immediately after the data was copied to the USB buffer(s), which has the additional benefit of avoiding the latency imposed by the host controller's delay of up to one frame when interrupting. Signed-off-by: Clemens Ladisch --- sound/usb/usbaudio.c | 151 ++++++++++++++++++++++----------------------------- 1 file changed, 65 insertions(+), 86 deletions(-) diff --git a/sound/usb/usbaudio.c b/sound/usb/usbaudio.c index a703d96bfcb..2b4f916a0a9 100644 --- a/sound/usb/usbaudio.c +++ b/sound/usb/usbaudio.c @@ -41,6 +41,7 @@ #include #include #include +#include #include #include #include @@ -129,8 +130,6 @@ struct snd_urb_ctx { snd_usb_substream_t *subs; int index; /* index for urb array */ int packets; /* number of packets per urb */ - int transfer; /* transferred size */ - char *buf; /* buffer for capture */ }; struct snd_urb_ops { @@ -168,9 +167,7 @@ struct snd_usb_substream { unsigned int running: 1; /* running status */ - unsigned int hwptr; /* free frame position in the buffer (only for playback) */ unsigned int hwptr_done; /* processed frame position in the buffer */ - unsigned int transfer_sched; /* scheduled frames since last period (for playback) */ unsigned int transfer_done; /* processed frames since last period update */ unsigned long active_mask; /* bitmask of active urbs */ unsigned long unlink_mask; /* bitmask of unlinked urbs */ @@ -179,12 +176,12 @@ struct snd_usb_substream { snd_urb_ctx_t dataurb[MAX_URBS]; /* data urb table */ snd_urb_ctx_t syncurb[SYNC_URBS]; /* sync urb table */ char syncbuf[SYNC_URBS * 4]; /* sync buffer; it's so small - let's get static */ - char *tmpbuf; /* temporary buffer for playback */ u64 formats; /* format bitmasks (all or'ed) */ unsigned int num_formats; /* number of supported audio formats (list) */ struct list_head fmt_list; /* format list */ spinlock_t lock; + struct tasklet_struct start_period_elapsed; /* for start trigger */ struct snd_urb_ops ops; /* callbacks (must be filled at init) */ }; @@ -320,7 +317,6 @@ static int prepare_capture_urb(snd_usb_substream_t *subs, urb->iso_frame_desc[i].length = subs->curpacksize; offs += subs->curpacksize; } - urb->transfer_buffer = ctx->buf; urb->transfer_buffer_length = offs; urb->number_of_packets = ctx->packets; #if 0 // for check @@ -482,12 +478,10 @@ static int retire_playback_sync_urb_hs(snd_usb_substream_t *subs, /* * prepare urb for playback data pipe * - * we copy the data directly from the pcm buffer. - * the current position to be copied is held in hwptr field. - * since a urb can handle only a single linear buffer, if the total - * transferred area overflows the buffer boundary, we cannot send - * it directly from the buffer. thus the data is once copied to - * a temporary buffer and urb points to that. + * Since a URB can handle only a single linear buffer, we must use double + * buffering when the data to be transferred overflows the buffer boundary. + * To avoid inconsistencies when updating hwptr_done, we use double buffering + * for all URBs. */ static int prepare_playback_urb(snd_usb_substream_t *subs, snd_pcm_runtime_t *runtime, @@ -496,6 +490,7 @@ static int prepare_playback_urb(snd_usb_substream_t *subs, int i, stride, offs; unsigned int counts; unsigned long flags; + int period_elapsed = 0; snd_urb_ctx_t *ctx = (snd_urb_ctx_t *)urb->context; stride = runtime->frame_bits >> 3; @@ -520,21 +515,25 @@ static int prepare_playback_urb(snd_usb_substream_t *subs, urb->iso_frame_desc[i].length = counts * stride; offs += counts; urb->number_of_packets++; - subs->transfer_sched += counts; - if (subs->transfer_sched >= runtime->period_size) { - subs->transfer_sched -= runtime->period_size; + subs->transfer_done += counts; + if (subs->transfer_done >= runtime->period_size) { + subs->transfer_done -= runtime->period_size; + period_elapsed = 1; if (subs->fmt_type == USB_FORMAT_TYPE_II) { - if (subs->transfer_sched > 0) { - /* FIXME: fill-max mode is not supported yet */ - offs -= subs->transfer_sched; - counts -= subs->transfer_sched; - urb->iso_frame_desc[i].length = counts * stride; - subs->transfer_sched = 0; + if (subs->transfer_done > 0) { + /* FIXME: fill-max mode is not + * supported yet */ + offs -= subs->transfer_done; + counts -= subs->transfer_done; + urb->iso_frame_desc[i].length = + counts * stride; + subs->transfer_done = 0; } i++; if (i < ctx->packets) { /* add a transfer delimiter */ - urb->iso_frame_desc[i].offset = offs * stride; + urb->iso_frame_desc[i].offset = + offs * stride; urb->iso_frame_desc[i].length = 0; urb->number_of_packets++; } @@ -542,58 +541,55 @@ static int prepare_playback_urb(snd_usb_substream_t *subs, break; } } - if (subs->hwptr + offs > runtime->buffer_size) { - /* err, the transferred area goes over buffer boundary. - * copy the data to the temp buffer. - */ - int len; - len = runtime->buffer_size - subs->hwptr; - urb->transfer_buffer = subs->tmpbuf; - memcpy(subs->tmpbuf, runtime->dma_area + subs->hwptr * stride, len * stride); - memcpy(subs->tmpbuf + len * stride, runtime->dma_area, (offs - len) * stride); - subs->hwptr += offs; - subs->hwptr -= runtime->buffer_size; + if (subs->hwptr_done + offs > runtime->buffer_size) { + /* err, the transferred area goes over buffer boundary. */ + unsigned int len = runtime->buffer_size - subs->hwptr_done; + memcpy(urb->transfer_buffer, + runtime->dma_area + subs->hwptr_done * stride, + len * stride); + memcpy(urb->transfer_buffer + len * stride, + runtime->dma_area, + (offs - len) * stride); } else { - /* set the buffer pointer */ - urb->transfer_buffer = runtime->dma_area + subs->hwptr * stride; - subs->hwptr += offs; - if (subs->hwptr == runtime->buffer_size) - subs->hwptr = 0; + memcpy(urb->transfer_buffer, + runtime->dma_area + subs->hwptr_done * stride, + offs * stride); } + subs->hwptr_done += offs; + if (subs->hwptr_done >= runtime->buffer_size) + subs->hwptr_done -= runtime->buffer_size; spin_unlock_irqrestore(&subs->lock, flags); urb->transfer_buffer_length = offs * stride; - ctx->transfer = offs; - + if (period_elapsed) { + if (likely(subs->running)) + snd_pcm_period_elapsed(subs->pcm_substream); + else + tasklet_hi_schedule(&subs->start_period_elapsed); + } return 0; } /* * process after playback data complete - * - * update the current position and call callback if a period is processed. + * - nothing to do */ static int retire_playback_urb(snd_usb_substream_t *subs, snd_pcm_runtime_t *runtime, struct urb *urb) { - unsigned long flags; - snd_urb_ctx_t *ctx = (snd_urb_ctx_t *)urb->context; - - spin_lock_irqsave(&subs->lock, flags); - subs->transfer_done += ctx->transfer; - subs->hwptr_done += ctx->transfer; - ctx->transfer = 0; - if (subs->hwptr_done >= runtime->buffer_size) - subs->hwptr_done -= runtime->buffer_size; - if (subs->transfer_done >= runtime->period_size) { - subs->transfer_done -= runtime->period_size; - spin_unlock_irqrestore(&subs->lock, flags); - snd_pcm_period_elapsed(subs->pcm_substream); - } else - spin_unlock_irqrestore(&subs->lock, flags); return 0; } +/* + * Delay the snd_pcm_period_elapsed() call until after the start trigger + * callback so that we're not longer in the substream's lock. + */ +static void start_period_elapsed(unsigned long data) +{ + snd_usb_substream_t *subs = (snd_usb_substream_t *)data; + snd_pcm_period_elapsed(subs->pcm_substream); +} + /* */ @@ -848,11 +844,10 @@ static int snd_usb_pcm_trigger(snd_pcm_substream_t *substream, int cmd) static void release_urb_ctx(snd_urb_ctx_t *u) { if (u->urb) { + kfree(u->urb->transfer_buffer); usb_free_urb(u->urb); u->urb = NULL; } - kfree(u->buf); - u->buf = NULL; } /* @@ -870,8 +865,6 @@ static void release_substream_urbs(snd_usb_substream_t *subs, int force) release_urb_ctx(&subs->dataurb[i]); for (i = 0; i < SYNC_URBS; i++) release_urb_ctx(&subs->syncurb[i]); - kfree(subs->tmpbuf); - subs->tmpbuf = NULL; subs->nurbs = 0; } @@ -923,24 +916,15 @@ static int init_substream_urbs(snd_usb_substream_t *subs, unsigned int period_by urb_packs = 1; urb_packs *= packs_per_ms; - /* allocate a temporary buffer for playback */ - if (is_playback) { - subs->tmpbuf = kmalloc(maxsize * urb_packs, GFP_KERNEL); - if (! subs->tmpbuf) { - snd_printk(KERN_ERR "cannot malloc tmpbuf\n"); - return -ENOMEM; - } - } - /* decide how many packets to be used */ if (is_playback) { unsigned int minsize; /* determine how small a packet can be */ minsize = (subs->freqn >> (16 - subs->datainterval)) * (frame_bits >> 3); - /* with sync from device, assume it can be 25% lower */ + /* with sync from device, assume it can be 12% lower */ if (subs->syncpipe) - minsize -= minsize >> 2; + minsize -= minsize >> 3; minsize = max(minsize, 1u); total_packs = (period_bytes + minsize - 1) / minsize; /* round up to multiple of packs_per_ms */ @@ -989,27 +973,22 @@ static int init_substream_urbs(snd_usb_substream_t *subs, unsigned int period_by snd_urb_ctx_t *u = &subs->dataurb[i]; u->index = i; u->subs = subs; - u->transfer = 0; u->packets = npacks[i]; if (subs->fmt_type == USB_FORMAT_TYPE_II) u->packets++; /* for transfer delimiter */ - if (! is_playback) { - /* allocate a capture buffer per urb */ - u->buf = kmalloc(maxsize * u->packets, GFP_KERNEL); - if (! u->buf) { - release_substream_urbs(subs, 0); - return -ENOMEM; - } - } u->urb = usb_alloc_urb(u->packets, GFP_KERNEL); if (! u->urb) { release_substream_urbs(subs, 0); return -ENOMEM; } - u->urb->dev = subs->dev; + u->urb->transfer_buffer = kmalloc(maxsize * u->packets, + GFP_KERNEL); + if (! u->urb->transfer_buffer) { + release_substream_urbs(subs, 0); + return -ENOMEM; + } u->urb->pipe = subs->datapipe; u->urb->transfer_flags = URB_ISO_ASAP; - u->urb->number_of_packets = u->packets; u->urb->interval = 1 << subs->datainterval; u->urb->context = u; u->urb->complete = snd_usb_complete_callback(snd_complete_urb); @@ -1029,7 +1008,6 @@ static int init_substream_urbs(snd_usb_substream_t *subs, unsigned int period_by } u->urb->transfer_buffer = subs->syncbuf + i * 4; u->urb->transfer_buffer_length = 4; - u->urb->dev = subs->dev; u->urb->pipe = subs->syncpipe; u->urb->transfer_flags = URB_ISO_ASAP; u->urb->number_of_packets = 1; @@ -1386,9 +1364,7 @@ static int snd_usb_pcm_prepare(snd_pcm_substream_t *substream) subs->curframesize = bytes_to_frames(runtime, subs->curpacksize); /* reset the pointer */ - subs->hwptr = 0; subs->hwptr_done = 0; - subs->transfer_sched = 0; subs->transfer_done = 0; subs->phase = 0; @@ -2035,6 +2011,9 @@ static void init_substream(snd_usb_stream_t *as, int stream, struct audioformat INIT_LIST_HEAD(&subs->fmt_list); spin_lock_init(&subs->lock); + if (stream == SNDRV_PCM_STREAM_PLAYBACK) + tasklet_init(&subs->start_period_elapsed, start_period_elapsed, + (unsigned long)subs); subs->stream = as; subs->direction = stream; -- cgit v1.2.3 From 9624ea812c7afd2e403c56366cadddb9ecfb88c6 Mon Sep 17 00:00:00 2001 From: Clemens Ladisch Date: Mon, 15 Aug 2005 08:25:24 +0200 Subject: [ALSA] usb-audio: actually schedule playback URBs at frame boundaries USB generic driver Change prepare_playback_urb() not to stop preparing packets before a frame boundary has been reached. Signed-off-by: Clemens Ladisch --- sound/usb/usbaudio.c | 8 +++++++- 1 file changed, 7 insertions(+), 1 deletion(-) diff --git a/sound/usb/usbaudio.c b/sound/usb/usbaudio.c index 2b4f916a0a9..3f7930c0b61 100644 --- a/sound/usb/usbaudio.c +++ b/sound/usb/usbaudio.c @@ -164,6 +164,7 @@ struct snd_usb_substream { unsigned int curframesize; /* current packet size in frames (for capture) */ unsigned int fill_max: 1; /* fill max packet size always */ unsigned int fmt_type; /* USB audio format type (1-3) */ + unsigned int packs_per_ms; /* packets per millisecond (for playback) */ unsigned int running: 1; /* running status */ @@ -537,9 +538,13 @@ static int prepare_playback_urb(snd_usb_substream_t *subs, urb->iso_frame_desc[i].length = 0; urb->number_of_packets++; } + break; } - break; } + /* finish at the frame boundary at/after the period boundary */ + if (period_elapsed && + (i & (subs->packs_per_ms - 1)) == subs->packs_per_ms - 1) + break; } if (subs->hwptr_done + offs > runtime->buffer_size) { /* err, the transferred area goes over buffer boundary. */ @@ -907,6 +912,7 @@ static int init_substream_urbs(snd_usb_substream_t *subs, unsigned int period_by packs_per_ms = 8 >> subs->datainterval; else packs_per_ms = 1; + subs->packs_per_ms = packs_per_ms; if (is_playback) { urb_packs = nrpacks; -- cgit v1.2.3 From daa150ef7d437d17973210f47a1c58623415df94 Mon Sep 17 00:00:00 2001 From: Clemens Ladisch Date: Mon, 15 Aug 2005 08:25:50 +0200 Subject: [ALSA] usb-audio: properly lock hwptr_done accesses USB generic driver Take the substream lock when reading hwptr_done to avoid a race condition with the updates in the URB callbacks. Signed-off-by: Clemens Ladisch --- sound/usb/usbaudio.c | 10 ++++++++-- 1 file changed, 8 insertions(+), 2 deletions(-) diff --git a/sound/usb/usbaudio.c b/sound/usb/usbaudio.c index 3f7930c0b61..8d4a085f642 100644 --- a/sound/usb/usbaudio.c +++ b/sound/usb/usbaudio.c @@ -815,8 +815,14 @@ static int wait_clear_urbs(snd_usb_substream_t *subs) */ static snd_pcm_uframes_t snd_usb_pcm_pointer(snd_pcm_substream_t *substream) { - snd_usb_substream_t *subs = (snd_usb_substream_t *)substream->runtime->private_data; - return subs->hwptr_done; + snd_usb_substream_t *subs; + snd_pcm_uframes_t hwptr_done; + + subs = (snd_usb_substream_t *)substream->runtime->private_data; + spin_lock(&subs->lock); + hwptr_done = subs->hwptr_done; + spin_unlock(&subs->lock); + return hwptr_done; } -- cgit v1.2.3 From 55851f734d7af7e5362d43b60331c95c32a3b027 Mon Sep 17 00:00:00 2001 From: Clemens Ladisch Date: Mon, 15 Aug 2005 08:34:16 +0200 Subject: [ALSA] usb-audio: use usb_buffer_alloc/free USB generic driver Use the USB buffer allocation functions to avoid repeated DMA mappings of our buffers, which are re-used quite a lot. Signed-off-by: Clemens Ladisch --- sound/usb/usbaudio.c | 52 +++++++++++++++++++++++++++++++++------------------- sound/usb/usbmidi.c | 17 +++++++++++++---- 2 files changed, 46 insertions(+), 23 deletions(-) diff --git a/sound/usb/usbaudio.c b/sound/usb/usbaudio.c index 8d4a085f642..13ff66b0a53 100644 --- a/sound/usb/usbaudio.c +++ b/sound/usb/usbaudio.c @@ -127,6 +127,7 @@ struct audioformat { struct snd_urb_ctx { struct urb *urb; + unsigned int buffer_size; /* size of data buffer, if data URB */ snd_usb_substream_t *subs; int index; /* index for urb array */ int packets; /* number of packets per urb */ @@ -176,7 +177,8 @@ struct snd_usb_substream { unsigned int nurbs; /* # urbs */ snd_urb_ctx_t dataurb[MAX_URBS]; /* data urb table */ snd_urb_ctx_t syncurb[SYNC_URBS]; /* sync urb table */ - char syncbuf[SYNC_URBS * 4]; /* sync buffer; it's so small - let's get static */ + char *syncbuf; /* sync buffer for all sync URBs */ + dma_addr_t sync_dma; /* DMA address of syncbuf */ u64 formats; /* format bitmasks (all or'ed) */ unsigned int num_formats; /* number of supported audio formats (list) */ @@ -855,7 +857,10 @@ static int snd_usb_pcm_trigger(snd_pcm_substream_t *substream, int cmd) static void release_urb_ctx(snd_urb_ctx_t *u) { if (u->urb) { - kfree(u->urb->transfer_buffer); + if (u->buffer_size) + usb_buffer_free(u->subs->dev, u->buffer_size, + u->urb->transfer_buffer, + u->urb->transfer_dma); usb_free_urb(u->urb); u->urb = NULL; } @@ -876,6 +881,9 @@ static void release_substream_urbs(snd_usb_substream_t *subs, int force) release_urb_ctx(&subs->dataurb[i]); for (i = 0; i < SYNC_URBS; i++) release_urb_ctx(&subs->syncurb[i]); + usb_buffer_free(subs->dev, SYNC_URBS * 4, + subs->syncbuf, subs->sync_dma); + subs->syncbuf = NULL; subs->nurbs = 0; } @@ -986,21 +994,19 @@ static int init_substream_urbs(snd_usb_substream_t *subs, unsigned int period_by u->index = i; u->subs = subs; u->packets = npacks[i]; + u->buffer_size = maxsize * u->packets; if (subs->fmt_type == USB_FORMAT_TYPE_II) u->packets++; /* for transfer delimiter */ u->urb = usb_alloc_urb(u->packets, GFP_KERNEL); - if (! u->urb) { - release_substream_urbs(subs, 0); - return -ENOMEM; - } - u->urb->transfer_buffer = kmalloc(maxsize * u->packets, - GFP_KERNEL); - if (! u->urb->transfer_buffer) { - release_substream_urbs(subs, 0); - return -ENOMEM; - } + if (! u->urb) + goto out_of_memory; + u->urb->transfer_buffer = + usb_buffer_alloc(subs->dev, u->buffer_size, GFP_KERNEL, + &u->urb->transfer_dma); + if (! u->urb->transfer_buffer) + goto out_of_memory; u->urb->pipe = subs->datapipe; - u->urb->transfer_flags = URB_ISO_ASAP; + u->urb->transfer_flags = URB_ISO_ASAP | URB_NO_TRANSFER_DMA_MAP; u->urb->interval = 1 << subs->datainterval; u->urb->context = u; u->urb->complete = snd_usb_complete_callback(snd_complete_urb); @@ -1008,20 +1014,24 @@ static int init_substream_urbs(snd_usb_substream_t *subs, unsigned int period_by if (subs->syncpipe) { /* allocate and initialize sync urbs */ + subs->syncbuf = usb_buffer_alloc(subs->dev, SYNC_URBS * 4, + GFP_KERNEL, &subs->sync_dma); + if (! subs->syncbuf) + goto out_of_memory; for (i = 0; i < SYNC_URBS; i++) { snd_urb_ctx_t *u = &subs->syncurb[i]; u->index = i; u->subs = subs; u->packets = 1; u->urb = usb_alloc_urb(1, GFP_KERNEL); - if (! u->urb) { - release_substream_urbs(subs, 0); - return -ENOMEM; - } + if (! u->urb) + goto out_of_memory; u->urb->transfer_buffer = subs->syncbuf + i * 4; + u->urb->transfer_dma = subs->sync_dma + i * 4; u->urb->transfer_buffer_length = 4; u->urb->pipe = subs->syncpipe; - u->urb->transfer_flags = URB_ISO_ASAP; + u->urb->transfer_flags = URB_ISO_ASAP | + URB_NO_TRANSFER_DMA_MAP; u->urb->number_of_packets = 1; u->urb->interval = 1 << subs->syncinterval; u->urb->context = u; @@ -1029,6 +1039,10 @@ static int init_substream_urbs(snd_usb_substream_t *subs, unsigned int period_by } } return 0; + +out_of_memory: + release_substream_urbs(subs, 0); + return -ENOMEM; } @@ -2036,7 +2050,7 @@ static void init_substream(snd_usb_stream_t *as, int stream, struct audioformat subs->ops = audio_urb_ops_high_speed[stream]; snd_pcm_lib_preallocate_pages(as->pcm->streams[stream].substream, SNDRV_DMA_TYPE_CONTINUOUS, - snd_dma_continuous_data(GFP_KERNEL), + snd_dma_continuous_data(GFP_NOIO), 64 * 1024, 128 * 1024); snd_pcm_set_ops(as->pcm, stream, stream == SNDRV_PCM_STREAM_PLAYBACK ? diff --git a/sound/usb/usbmidi.c b/sound/usb/usbmidi.c index 5778a9b725e..d0d895df537 100644 --- a/sound/usb/usbmidi.c +++ b/sound/usb/usbmidi.c @@ -765,7 +765,10 @@ static snd_rawmidi_ops_t snd_usbmidi_input_ops = { static void snd_usbmidi_in_endpoint_delete(snd_usb_midi_in_endpoint_t* ep) { if (ep->urb) { - kfree(ep->urb->transfer_buffer); + usb_buffer_free(ep->umidi->chip->dev, + ep->urb->transfer_buffer_length, + ep->urb->transfer_buffer, + ep->urb->transfer_dma); usb_free_urb(ep->urb); } kfree(ep); @@ -799,7 +802,8 @@ static int snd_usbmidi_in_endpoint_create(snd_usb_midi_t* umidi, else pipe = usb_rcvbulkpipe(umidi->chip->dev, ep_info->in_ep); length = usb_maxpacket(umidi->chip->dev, pipe, 0); - buffer = kmalloc(length, GFP_KERNEL); + buffer = usb_buffer_alloc(umidi->chip->dev, length, GFP_KERNEL, + &ep->urb->transfer_dma); if (!buffer) { snd_usbmidi_in_endpoint_delete(ep); return -ENOMEM; @@ -812,6 +816,7 @@ static int snd_usbmidi_in_endpoint_create(snd_usb_midi_t* umidi, usb_fill_bulk_urb(ep->urb, umidi->chip->dev, pipe, buffer, length, snd_usb_complete_callback(snd_usbmidi_in_urb_complete), ep); + ep->urb->transfer_flags = URB_NO_TRANSFER_DMA_MAP; rep->in = ep; return 0; @@ -835,7 +840,9 @@ static void snd_usbmidi_out_endpoint_delete(snd_usb_midi_out_endpoint_t* ep) if (ep->tasklet.func) tasklet_kill(&ep->tasklet); if (ep->urb) { - kfree(ep->urb->transfer_buffer); + usb_buffer_free(ep->umidi->chip->dev, ep->max_transfer, + ep->urb->transfer_buffer, + ep->urb->transfer_dma); usb_free_urb(ep->urb); } kfree(ep); @@ -867,7 +874,8 @@ static int snd_usbmidi_out_endpoint_create(snd_usb_midi_t* umidi, /* we never use interrupt output pipes */ pipe = usb_sndbulkpipe(umidi->chip->dev, ep_info->out_ep); ep->max_transfer = usb_maxpacket(umidi->chip->dev, pipe, 1); - buffer = kmalloc(ep->max_transfer, GFP_KERNEL); + buffer = usb_buffer_alloc(umidi->chip->dev, ep->max_transfer, + GFP_KERNEL, &ep->urb->transfer_dma); if (!buffer) { snd_usbmidi_out_endpoint_delete(ep); return -ENOMEM; @@ -875,6 +883,7 @@ static int snd_usbmidi_out_endpoint_create(snd_usb_midi_t* umidi, usb_fill_bulk_urb(ep->urb, umidi->chip->dev, pipe, buffer, ep->max_transfer, snd_usb_complete_callback(snd_usbmidi_out_urb_complete), ep); + ep->urb->transfer_flags = URB_NO_TRANSFER_DMA_MAP; spin_lock_init(&ep->buffer_lock); tasklet_init(&ep->tasklet, snd_usbmidi_out_tasklet, (unsigned long)ep); -- cgit v1.2.3 From 6207e51b79f89352a8623f806df5bfafb012e489 Mon Sep 17 00:00:00 2001 From: Clemens Ladisch Date: Mon, 15 Aug 2005 08:35:25 +0200 Subject: [ALSA] usb-audio: use vmalloc for the PCM buffer USB generic driver With the double buffering, we no longer need contiguous memory for the PCM buffer, so we can use vmalloc() instead of the preallocation functions, and increase the maximum size to 256 KB. Signed-off-by: Clemens Ladisch --- sound/usb/usbaudio.c | 53 +++++++++++++++++++++++++++++++++++++++++++--------- 1 file changed, 44 insertions(+), 9 deletions(-) diff --git a/sound/usb/usbaudio.c b/sound/usb/usbaudio.c index 13ff66b0a53..5aa5fe651a8 100644 --- a/sound/usb/usbaudio.c +++ b/sound/usb/usbaudio.c @@ -46,6 +46,7 @@ #include #include #include +#include #include #include #include @@ -676,6 +677,42 @@ static void snd_complete_sync_urb(struct urb *urb, struct pt_regs *regs) } +/* get the physical page pointer at the given offset */ +static struct page *snd_pcm_get_vmalloc_page(snd_pcm_substream_t *subs, + unsigned long offset) +{ + void *pageptr = subs->runtime->dma_area + offset; + return vmalloc_to_page(pageptr); +} + +/* allocate virtual buffer; may be called more than once */ +static int snd_pcm_alloc_vmalloc_buffer(snd_pcm_substream_t *subs, size_t size) +{ + snd_pcm_runtime_t *runtime = subs->runtime; + if (runtime->dma_area) { + if (runtime->dma_bytes >= size) + return 0; /* already large enough */ + vfree_nocheck(runtime->dma_area); + } + runtime->dma_area = vmalloc_nocheck(size); + if (! runtime->dma_area) + return -ENOMEM; + runtime->dma_bytes = size; + return 0; +} + +/* free virtual buffer; may be called more than once */ +static int snd_pcm_free_vmalloc_buffer(snd_pcm_substream_t *subs) +{ + snd_pcm_runtime_t *runtime = subs->runtime; + if (runtime->dma_area) { + vfree_nocheck(runtime->dma_area); + runtime->dma_area = NULL; + } + return 0; +} + + /* * unlink active urbs. */ @@ -1311,7 +1348,8 @@ static int snd_usb_hw_params(snd_pcm_substream_t *substream, unsigned int channels, rate, format; int ret, changed; - ret = snd_pcm_lib_malloc_pages(substream, params_buffer_bytes(hw_params)); + ret = snd_pcm_alloc_vmalloc_buffer(substream, + params_buffer_bytes(hw_params)); if (ret < 0) return ret; @@ -1367,7 +1405,7 @@ static int snd_usb_hw_free(snd_pcm_substream_t *substream) subs->cur_rate = 0; subs->period_bytes = 0; release_substream_urbs(subs, 0); - return snd_pcm_lib_free_pages(substream); + return snd_pcm_free_vmalloc_buffer(substream); } /* @@ -1406,7 +1444,7 @@ static snd_pcm_hardware_t snd_usb_playback = .info = (SNDRV_PCM_INFO_MMAP | SNDRV_PCM_INFO_INTERLEAVED | SNDRV_PCM_INFO_BLOCK_TRANSFER | SNDRV_PCM_INFO_MMAP_VALID), - .buffer_bytes_max = (128*1024), + .buffer_bytes_max = (256*1024), .period_bytes_min = 64, .period_bytes_max = (128*1024), .periods_min = 2, @@ -1418,7 +1456,7 @@ static snd_pcm_hardware_t snd_usb_capture = .info = (SNDRV_PCM_INFO_MMAP | SNDRV_PCM_INFO_INTERLEAVED | SNDRV_PCM_INFO_BLOCK_TRANSFER | SNDRV_PCM_INFO_MMAP_VALID), - .buffer_bytes_max = (128*1024), + .buffer_bytes_max = (256*1024), .period_bytes_min = 64, .period_bytes_max = (128*1024), .periods_min = 2, @@ -1810,6 +1848,7 @@ static snd_pcm_ops_t snd_usb_playback_ops = { .prepare = snd_usb_pcm_prepare, .trigger = snd_usb_pcm_trigger, .pointer = snd_usb_pcm_pointer, + .page = snd_pcm_get_vmalloc_page, }; static snd_pcm_ops_t snd_usb_capture_ops = { @@ -1821,6 +1860,7 @@ static snd_pcm_ops_t snd_usb_capture_ops = { .prepare = snd_usb_pcm_prepare, .trigger = snd_usb_pcm_trigger, .pointer = snd_usb_pcm_pointer, + .page = snd_pcm_get_vmalloc_page, }; @@ -2048,10 +2088,6 @@ static void init_substream(snd_usb_stream_t *as, int stream, struct audioformat subs->ops = audio_urb_ops[stream]; else subs->ops = audio_urb_ops_high_speed[stream]; - snd_pcm_lib_preallocate_pages(as->pcm->streams[stream].substream, - SNDRV_DMA_TYPE_CONTINUOUS, - snd_dma_continuous_data(GFP_NOIO), - 64 * 1024, 128 * 1024); snd_pcm_set_ops(as->pcm, stream, stream == SNDRV_PCM_STREAM_PLAYBACK ? &snd_usb_playback_ops : &snd_usb_capture_ops); @@ -2097,7 +2133,6 @@ static void snd_usb_audio_pcm_free(snd_pcm_t *pcm) snd_usb_stream_t *stream = pcm->private_data; if (stream) { stream->pcm = NULL; - snd_pcm_lib_preallocate_free_for_all(pcm); snd_usb_audio_stream_free(stream); } } -- cgit v1.2.3 From 3e6c6139f0cf9c196c3fd700055f2e22ca22e726 Mon Sep 17 00:00:00 2001 From: Clemens Ladisch Date: Mon, 15 Aug 2005 09:13:32 +0200 Subject: [ALSA] ac97: make patch_wolfson_wm97??_specific() functions static AC97 Codec Make the patch_wolfson_wm97??_specific() functions static again. This patch was accidentally reverted in rev. 1.92. Signed-off-by: Clemens Ladisch --- sound/pci/ac97/ac97_patch.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/sound/pci/ac97/ac97_patch.c b/sound/pci/ac97/ac97_patch.c index a0d51553617..616504ef370 100644 --- a/sound/pci/ac97/ac97_patch.c +++ b/sound/pci/ac97/ac97_patch.c @@ -375,7 +375,7 @@ AC97_DOUBLE("Front Playback Volume", AC97_WM97XX_FMIXER_VOL, 8, 0, 31, 1), AC97_SINGLE("Front Playback Switch", AC97_WM97XX_FMIXER_VOL, 15, 1, 1), }; -int patch_wolfson_wm9703_specific(ac97_t * ac97) +static int patch_wolfson_wm9703_specific(ac97_t * ac97) { /* This is known to work for the ViewSonic ViewPad 1000 * Randolph Bentson @@ -410,7 +410,7 @@ AC97_DOUBLE("Rear DAC Volume", AC97_WM9704_RPCM_VOL, 8, 0, 31, 1), AC97_DOUBLE("Surround Volume", AC97_SURROUND_MASTER, 8, 0, 31, 1), }; -int patch_wolfson_wm9704_specific(ac97_t * ac97) +static int patch_wolfson_wm9704_specific(ac97_t * ac97) { int err, i; for (i = 0; i < ARRAY_SIZE(wm9704_snd_ac97_controls); i++) { @@ -433,7 +433,7 @@ int patch_wolfson04(ac97_t * ac97) return 0; } -int patch_wolfson_wm9705_specific(ac97_t * ac97) +static int patch_wolfson_wm9705_specific(ac97_t * ac97) { int err, i; for (i = 0; i < ARRAY_SIZE(wm97xx_snd_ac97_controls); i++) { @@ -558,7 +558,7 @@ AC97_SINGLE("Headphone ZC Switch", AC97_HEADPHONE, 7, 1, 0), AC97_SINGLE("Mono ZC Switch", AC97_MASTER_MONO, 7, 1, 0), }; -int patch_wolfson_wm9711_specific(ac97_t * ac97) +static int patch_wolfson_wm9711_specific(ac97_t * ac97) { int err, i; -- cgit v1.2.3 From cff79742fc9e80242a9147a348621e4373c76287 Mon Sep 17 00:00:00 2001 From: Jaroslav Kysela Date: Mon, 15 Aug 2005 13:08:04 +0200 Subject: [ALSA] opl3sa2 - use different name for PnP BIOS driver OPL3SA2 driver - use different name (opl3sa2-pnpbios) for PnP BIOS driver - don't print warning when manual config of resources fails (PnP BIOS) Signed-off-by: Jaroslav Kysela --- sound/isa/opl3sa2.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/sound/isa/opl3sa2.c b/sound/isa/opl3sa2.c index bb5406cf0a1..75bd6eca63e 100644 --- a/sound/isa/opl3sa2.c +++ b/sound/isa/opl3sa2.c @@ -607,7 +607,7 @@ static int __init snd_opl3sa2_pnp(int dev, opl3sa2_t *chip, if (irq[dev] != SNDRV_AUTO_IRQ) pnp_resource_change(&cfg->irq_resource[0], irq[dev], 1); err = pnp_manual_config_dev(pdev, cfg, 0); - if (err < 0) + if (err < 0 && isapnp) snd_printk(KERN_ERR "PnP manual resources are invalid, using auto config\n"); err = pnp_activate_dev(pdev); if (err < 0) { @@ -839,7 +839,7 @@ static void __devexit snd_opl3sa2_pnp_remove(struct pnp_dev * pdev) } static struct pnp_driver opl3sa2_pnp_driver = { - .name = "opl3sa2", + .name = "opl3sa2-pnpbios", .id_table = snd_opl3sa2_pnpbiosids, .probe = snd_opl3sa2_pnp_detect, .remove = __devexit_p(snd_opl3sa2_pnp_remove), -- cgit v1.2.3 From b27113102f576092cd8f5d6ce8365aa6e2f58134 Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Mon, 15 Aug 2005 15:01:10 +0200 Subject: [ALSA] Fix PCM 32bit compat layer PCM Midlevel Fixed the handling of boundary in PCM 32bit compat layer. Positions in hwsync are bound in the 32bit boundary size. Signed-off-by: Takashi Iwai --- sound/core/pcm_compat.c | 42 ++++++++++++++++++++++++++++-------------- 1 file changed, 28 insertions(+), 14 deletions(-) diff --git a/sound/core/pcm_compat.c b/sound/core/pcm_compat.c index 3920bf0eebb..eef94a15f50 100644 --- a/sound/core/pcm_compat.c +++ b/sound/core/pcm_compat.c @@ -103,10 +103,24 @@ struct sndrv_pcm_sw_params32 { unsigned char reserved[64]; }; +/* recalcuate the boundary within 32bit */ +static snd_pcm_uframes_t recalculate_boundary(snd_pcm_runtime_t *runtime) +{ + snd_pcm_uframes_t boundary; + + if (! runtime->buffer_size) + return 0; + boundary = runtime->buffer_size; + while (boundary * 2 <= 0x7fffffffUL - runtime->buffer_size) + boundary *= 2; + return boundary; +} + static int snd_pcm_ioctl_sw_params_compat(snd_pcm_substream_t *substream, struct sndrv_pcm_sw_params32 __user *src) { snd_pcm_sw_params_t params; + snd_pcm_uframes_t boundary; int err; memset(¶ms, 0, sizeof(params)); @@ -120,10 +134,17 @@ static int snd_pcm_ioctl_sw_params_compat(snd_pcm_substream_t *substream, get_user(params.silence_threshold, &src->silence_threshold) || get_user(params.silence_size, &src->silence_size)) return -EFAULT; + /* + * Check silent_size parameter. Since we have 64bit boundary, + * silence_size must be compared with the 32bit boundary. + */ + boundary = recalculate_boundary(substream->runtime); + if (boundary && params.silence_size >= boundary) + params.silence_size = substream->runtime->boundary; err = snd_pcm_sw_params(substream, ¶ms); if (err < 0) return err; - if (put_user(params.boundary, &src->boundary)) + if (put_user(boundary, &src->boundary)) return -EFAULT; return err; } @@ -199,16 +220,6 @@ static int snd_pcm_status_user_compat(snd_pcm_substream_t *substream, return err; } -/* recalcuate the boundary within 32bit */ -static void recalculate_boundary(snd_pcm_runtime_t *runtime) -{ - if (! runtime->buffer_size) - return; - runtime->boundary = runtime->buffer_size; - while (runtime->boundary * 2 <= 0x7fffffffUL - runtime->buffer_size) - runtime->boundary *= 2; -} - /* both for HW_PARAMS and HW_REFINE */ static int snd_pcm_ioctl_hw_params_compat(snd_pcm_substream_t *substream, int refine, @@ -242,7 +253,7 @@ static int snd_pcm_ioctl_hw_params_compat(snd_pcm_substream_t *substream, } if (! refine) - recalculate_boundary(runtime); + runtime->boundary = recalculate_boundary(runtime); error: kfree(data); return err; @@ -380,6 +391,7 @@ static int snd_pcm_ioctl_sync_ptr_compat(snd_pcm_substream_t *substream, u32 sflags; struct sndrv_pcm_mmap_control scontrol; struct sndrv_pcm_mmap_status sstatus; + snd_pcm_uframes_t boundary; int err; snd_assert(runtime, return -EINVAL); @@ -395,17 +407,19 @@ static int snd_pcm_ioctl_sync_ptr_compat(snd_pcm_substream_t *substream, } status = runtime->status; control = runtime->control; + boundary = recalculate_boundary(runtime); snd_pcm_stream_lock_irq(substream); + /* FIXME: we should consider the boundary for the sync from app */ if (!(sflags & SNDRV_PCM_SYNC_PTR_APPL)) control->appl_ptr = scontrol.appl_ptr; else - scontrol.appl_ptr = control->appl_ptr; + scontrol.appl_ptr = control->appl_ptr % boundary; if (!(sflags & SNDRV_PCM_SYNC_PTR_AVAIL_MIN)) control->avail_min = scontrol.avail_min; else scontrol.avail_min = control->avail_min; sstatus.state = status->state; - sstatus.hw_ptr = status->hw_ptr; + sstatus.hw_ptr = status->hw_ptr % boundary; sstatus.tstamp = status->tstamp; sstatus.suspended_state = status->suspended_state; snd_pcm_stream_unlock_irq(substream); -- cgit v1.2.3 From 16d3f140fc265c9b9c0f8975e0b36fe15912508f Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Mon, 15 Aug 2005 15:02:28 +0200 Subject: [ALSA] via82xx - Fix SPDIF sample rates VIA82xx driver Fixed the sample rates set in the fourth DXS channel with Non-VRA mode. Signed-off-by: Takashi Iwai --- sound/pci/via82xx.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/sound/pci/via82xx.c b/sound/pci/via82xx.c index 38b96eabea6..819f27b2762 100644 --- a/sound/pci/via82xx.c +++ b/sound/pci/via82xx.c @@ -929,12 +929,12 @@ static int snd_via8233_playback_prepare(snd_pcm_substream_t *substream) if ((rate_changed = via_lock_rate(&chip->rates[0], ac97_rate)) < 0) return rate_changed; - if (rate_changed) { + if (rate_changed) snd_ac97_set_rate(chip->ac97, AC97_PCM_FRONT_DAC_RATE, chip->no_vra ? 48000 : runtime->rate); - snd_ac97_set_rate(chip->ac97, AC97_SPDIF, - chip->no_vra ? 48000 : runtime->rate); - } + if (chip->spdif_on && viadev->reg_offset == 0x30) + snd_ac97_set_rate(chip->ac97, AC97_SPDIF, runtime->rate); + if (runtime->rate == 48000) rbits = 0xfffff; else -- cgit v1.2.3 From 5a47fe3c5e8f394fb1578bbe8117f3dcc250b6fd Mon Sep 17 00:00:00 2001 From: Jaroslav Kysela Date: Mon, 15 Aug 2005 20:01:40 +0200 Subject: [ALSA] hda-patch-realtek - added pci subdevice ID for Acer TravelMate 8100 (3 stack model + digital out) HDA Codec driver Signed-off-by: Jaroslav Kysela --- sound/pci/hda/patch_realtek.c | 1 + 1 file changed, 1 insertion(+) diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c index 9b856990078..d19da2bae66 100644 --- a/sound/pci/hda/patch_realtek.c +++ b/sound/pci/hda/patch_realtek.c @@ -1524,6 +1524,7 @@ static struct hda_board_config alc880_cfg_tbl[] = { /* Back 3 jack plus 1 SPDIF out jack, front 2 jack */ { .modelname = "3stack-digout", .config = ALC880_3ST_DIG }, { .pci_subvendor = 0x8086, .pci_subdevice = 0xe308, .config = ALC880_3ST_DIG }, + { .pci_subvendor = 0x1025, .pci_subdevice = 0x0070, .config = ALC880_3ST_DIG }, /* Back 3 jack plus 1 SPDIF out jack, front 2 jack (Internal add Aux-In)*/ { .pci_subvendor = 0x8086, .pci_subdevice = 0xe305, .config = ALC880_3ST_DIG }, -- cgit v1.2.3 From 47123197c5522f4ae3dc5914e7832dd047f9ddc8 Mon Sep 17 00:00:00 2001 From: Jaroslav Kysela Date: Mon, 15 Aug 2005 20:53:07 +0200 Subject: [ALSA] hda-intel: Suspend/resume fixes for PCM devices HDA Intel driver - removed SNDRV_PCM_INFO_RESUME (the driver cannot do PCM resume at the time) - fixed chip->pcm_devs initialization Signed-off-by: Jaroslav Kysela --- sound/pci/hda/hda_intel.c | 7 +++++-- 1 file changed, 5 insertions(+), 2 deletions(-) diff --git a/sound/pci/hda/hda_intel.c b/sound/pci/hda/hda_intel.c index 2b6bd3139b8..58e15b8896a 100644 --- a/sound/pci/hda/hda_intel.c +++ b/sound/pci/hda/hda_intel.c @@ -900,8 +900,8 @@ static snd_pcm_hardware_t azx_pcm_hw = { .info = (SNDRV_PCM_INFO_MMAP | SNDRV_PCM_INFO_INTERLEAVED | SNDRV_PCM_INFO_BLOCK_TRANSFER | SNDRV_PCM_INFO_MMAP_VALID | - SNDRV_PCM_INFO_PAUSE | - SNDRV_PCM_INFO_RESUME), + SNDRV_PCM_INFO_PAUSE /*|*/ + /*SNDRV_PCM_INFO_RESUME*/), .formats = SNDRV_PCM_FMTBIT_S16_LE, .rates = SNDRV_PCM_RATE_48000, .rate_min = 48000, @@ -1050,6 +1050,7 @@ static int azx_pcm_trigger(snd_pcm_substream_t *substream, int cmd) azx_dev->running = 1; break; case SNDRV_PCM_TRIGGER_PAUSE_PUSH: + case SNDRV_PCM_TRIGGER_SUSPEND: case SNDRV_PCM_TRIGGER_STOP: azx_stream_stop(chip, azx_dev); azx_dev->running = 0; @@ -1059,6 +1060,7 @@ static int azx_pcm_trigger(snd_pcm_substream_t *substream, int cmd) } spin_unlock(&chip->reg_lock); if (cmd == SNDRV_PCM_TRIGGER_PAUSE_PUSH || + cmd == SNDRV_PCM_TRIGGER_SUSPEND || cmd == SNDRV_PCM_TRIGGER_STOP) { int timeout = 5000; while (azx_sd_readb(azx_dev, SD_CTL) & SD_CTL_DMA_START && --timeout) @@ -1137,6 +1139,7 @@ static int __devinit create_codec_pcm(azx_t *chip, struct hda_codec *codec, snd_dma_pci_data(chip->pci), 1024 * 64, 1024 * 128); chip->pcm[pcm_dev] = pcm; + chip->pcm_devs = pcm_dev + 1; return 0; } -- cgit v1.2.3 From a501dfa3a763451dedd583eb90a6c9e90d0e3a3c Mon Sep 17 00:00:00 2001 From: Jaroslav Kysela Date: Tue, 16 Aug 2005 11:09:05 +0200 Subject: [ALSA] Timer API - added SUSPEND/RESUME events PCM Midlevel,Timer Midlevel,ALSA Core - added SNDRV_TIMER_EVENT_SUSPEND / RESUME events - changed timer events from PAUSE / CONTINUE in PCM midlevel to SUSPEND / RESUME Signed-off-by: Jaroslav Kysela --- include/sound/asound.h | 6 +++++- sound/core/pcm_native.c | 4 ++-- sound/core/timer.c | 12 +++++++++--- 3 files changed, 16 insertions(+), 6 deletions(-) diff --git a/include/sound/asound.h b/include/sound/asound.h index 9974f83cca4..694b6e66efc 100644 --- a/include/sound/asound.h +++ b/include/sound/asound.h @@ -560,7 +560,7 @@ enum { * Timer section - /dev/snd/timer */ -#define SNDRV_TIMER_VERSION SNDRV_PROTOCOL_VERSION(2, 0, 4) +#define SNDRV_TIMER_VERSION SNDRV_PROTOCOL_VERSION(2, 0, 5) enum sndrv_timer_class { SNDRV_TIMER_CLASS_NONE = -1, @@ -693,11 +693,15 @@ enum sndrv_timer_event { SNDRV_TIMER_EVENT_CONTINUE, /* val = resolution in ns */ SNDRV_TIMER_EVENT_PAUSE, /* val = 0 */ SNDRV_TIMER_EVENT_EARLY, /* val = 0, early event */ + SNDRV_TIMER_EVENT_SUSPEND, /* val = 0 */ + SNDRV_TIMER_EVENT_RESUME, /* val = 0 */ /* master timer events for slave timer instances */ SNDRV_TIMER_EVENT_MSTART = SNDRV_TIMER_EVENT_START + 10, SNDRV_TIMER_EVENT_MSTOP = SNDRV_TIMER_EVENT_STOP + 10, SNDRV_TIMER_EVENT_MCONTINUE = SNDRV_TIMER_EVENT_CONTINUE + 10, SNDRV_TIMER_EVENT_MPAUSE = SNDRV_TIMER_EVENT_PAUSE + 10, + SNDRV_TIMER_EVENT_MSUSPEND = SNDRV_TIMER_EVENT_SUSPEND + 10, + SNDRV_TIMER_EVENT_MRESUME = SNDRV_TIMER_EVENT_RESUME + 10, }; struct sndrv_timer_tread { diff --git a/sound/core/pcm_native.c b/sound/core/pcm_native.c index 5041be25d75..03c17159dd8 100644 --- a/sound/core/pcm_native.c +++ b/sound/core/pcm_native.c @@ -1025,7 +1025,7 @@ static void snd_pcm_post_suspend(snd_pcm_substream_t *substream, int state) snd_pcm_runtime_t *runtime = substream->runtime; snd_pcm_trigger_tstamp(substream); if (substream->timer) - snd_timer_notify(substream->timer, SNDRV_TIMER_EVENT_MPAUSE, &runtime->trigger_tstamp); + snd_timer_notify(substream->timer, SNDRV_TIMER_EVENT_MSUSPEND, &runtime->trigger_tstamp); runtime->status->suspended_state = runtime->status->state; runtime->status->state = SNDRV_PCM_STATE_SUSPENDED; snd_pcm_tick_set(substream, 0); @@ -1115,7 +1115,7 @@ static void snd_pcm_post_resume(snd_pcm_substream_t *substream, int state) snd_pcm_runtime_t *runtime = substream->runtime; snd_pcm_trigger_tstamp(substream); if (substream->timer) - snd_timer_notify(substream->timer, SNDRV_TIMER_EVENT_MCONTINUE, &runtime->trigger_tstamp); + snd_timer_notify(substream->timer, SNDRV_TIMER_EVENT_MRESUME, &runtime->trigger_tstamp); runtime->status->state = runtime->status->suspended_state; if (runtime->sleep_min) snd_pcm_tick_prepare(substream); diff --git a/sound/core/timer.c b/sound/core/timer.c index c3997e04721..56bd383a06c 100644 --- a/sound/core/timer.c +++ b/sound/core/timer.c @@ -880,9 +880,11 @@ void snd_timer_notify(snd_timer_t *timer, enum sndrv_timer_event event, struct t struct list_head *p, *n; snd_runtime_check(timer->hw.flags & SNDRV_TIMER_HW_SLAVE, return); - snd_assert(event >= SNDRV_TIMER_EVENT_MSTART && event <= SNDRV_TIMER_EVENT_MPAUSE, return); + snd_assert(event >= SNDRV_TIMER_EVENT_MSTART && event <= SNDRV_TIMER_EVENT_MRESUME, return); spin_lock_irqsave(&timer->lock, flags); - if (event == SNDRV_TIMER_EVENT_MSTART || event == SNDRV_TIMER_EVENT_MCONTINUE) { + if (event == SNDRV_TIMER_EVENT_MSTART || + event == SNDRV_TIMER_EVENT_MCONTINUE || + event == SNDRV_TIMER_EVENT_MRESUME) { if (timer->hw.c_resolution) resolution = timer->hw.c_resolution(timer); else @@ -1555,10 +1557,14 @@ static int snd_timer_user_params(struct file *file, snd_timer_params_t __user *_ (1< Date: Tue, 16 Aug 2005 11:32:04 +0200 Subject: [ALSA] Timer API - SNDRV_TIMER_EVENT_RESUME - val is resolution in ns ALSA Core Signed-off-by: Jaroslav Kysela --- include/sound/asound.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/include/sound/asound.h b/include/sound/asound.h index 694b6e66efc..8e552d627fa 100644 --- a/include/sound/asound.h +++ b/include/sound/asound.h @@ -694,7 +694,7 @@ enum sndrv_timer_event { SNDRV_TIMER_EVENT_PAUSE, /* val = 0 */ SNDRV_TIMER_EVENT_EARLY, /* val = 0, early event */ SNDRV_TIMER_EVENT_SUSPEND, /* val = 0 */ - SNDRV_TIMER_EVENT_RESUME, /* val = 0 */ + SNDRV_TIMER_EVENT_RESUME, /* val = resolution in ns */ /* master timer events for slave timer instances */ SNDRV_TIMER_EVENT_MSTART = SNDRV_TIMER_EVENT_START + 10, SNDRV_TIMER_EVENT_MSTOP = SNDRV_TIMER_EVENT_STOP + 10, -- cgit v1.2.3 From 65d11d95515db3efb629202104cfc672476618b5 Mon Sep 17 00:00:00 2001 From: Jaroslav Kysela Date: Tue, 16 Aug 2005 13:05:43 +0200 Subject: [ALSA] ALSA timer - fixed compilation Timer Midlevel Signed-off-by: Jaroslav Kysela --- sound/core/timer.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/sound/core/timer.c b/sound/core/timer.c index 56bd383a06c..4104f6e292e 100644 --- a/sound/core/timer.c +++ b/sound/core/timer.c @@ -1562,8 +1562,8 @@ static int snd_timer_user_params(struct file *file, snd_timer_params_t __user *_ (1< Date: Tue, 16 Aug 2005 16:52:24 +0200 Subject: [ALSA] intel8x0 - Fix PM Intel8x0 driver Fixed the PCM resume of intel8x0. Restores the requested register setting. Signed-off-by: Takashi Iwai --- sound/pci/intel8x0.c | 39 +++++++++++++++++++++++++++++++-------- 1 file changed, 31 insertions(+), 8 deletions(-) diff --git a/sound/pci/intel8x0.c b/sound/pci/intel8x0.c index d7af3e47443..390b6c8f9a1 100644 --- a/sound/pci/intel8x0.c +++ b/sound/pci/intel8x0.c @@ -389,6 +389,7 @@ typedef struct { struct ac97_pcm *pcm; int pcm_open_flag; unsigned int page_attr_changed: 1; + unsigned int suspended: 1; } ichdev_t; typedef struct _snd_intel8x0 intel8x0_t; @@ -862,12 +863,16 @@ static int snd_intel8x0_pcm_trigger(snd_pcm_substream_t *substream, int cmd) unsigned long port = ichdev->reg_offset; switch (cmd) { - case SNDRV_PCM_TRIGGER_START: case SNDRV_PCM_TRIGGER_RESUME: + ichdev->suspended = 0; + /* fallthru */ + case SNDRV_PCM_TRIGGER_START: val = ICH_IOCE | ICH_STARTBM; break; - case SNDRV_PCM_TRIGGER_STOP: case SNDRV_PCM_TRIGGER_SUSPEND: + ichdev->suspended = 1; + /* fallthru */ + case SNDRV_PCM_TRIGGER_STOP: val = 0; break; case SNDRV_PCM_TRIGGER_PAUSE_PUSH: @@ -899,9 +904,11 @@ static int snd_intel8x0_ali_trigger(snd_pcm_substream_t *substream, int cmd) val = igetdword(chip, ICHREG(ALI_DMACR)); switch (cmd) { + case SNDRV_PCM_TRIGGER_RESUME: + ichdev->suspended = 0; + /* fallthru */ case SNDRV_PCM_TRIGGER_START: case SNDRV_PCM_TRIGGER_PAUSE_RELEASE: - case SNDRV_PCM_TRIGGER_RESUME: if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) { /* clear FIFO for synchronization of channels */ fifo = igetdword(chip, fiforeg[ichdev->ali_slot / 4]); @@ -913,9 +920,11 @@ static int snd_intel8x0_ali_trigger(snd_pcm_substream_t *substream, int cmd) val &= ~(1 << (ichdev->ali_slot + 16)); /* clear PAUSE flag */ iputdword(chip, ICHREG(ALI_DMACR), val | (1 << ichdev->ali_slot)); /* start DMA */ break; + case SNDRV_PCM_TRIGGER_SUSPEND: + ichdev->suspended = 1; + /* fallthru */ case SNDRV_PCM_TRIGGER_STOP: case SNDRV_PCM_TRIGGER_PAUSE_PUSH: - case SNDRV_PCM_TRIGGER_SUSPEND: iputdword(chip, ICHREG(ALI_DMACR), val | (1 << (ichdev->ali_slot + 16))); /* pause */ iputbyte(chip, port + ICH_REG_OFF_CR, 0); while (igetbyte(chip, port + ICH_REG_OFF_CR)) @@ -994,6 +1003,8 @@ static void snd_intel8x0_setup_pcm_out(intel8x0_t *chip, { unsigned int cnt; int dbl = runtime->rate > 48000; + + spin_lock_irq(&chip->reg_lock); switch (chip->device_type) { case DEVICE_ALI: cnt = igetdword(chip, ICHREG(ALI_SCR)); @@ -1037,6 +1048,7 @@ static void snd_intel8x0_setup_pcm_out(intel8x0_t *chip, iputdword(chip, ICHREG(GLOB_CNT), cnt); break; } + spin_unlock_irq(&chip->reg_lock); } static int snd_intel8x0_pcm_prepare(snd_pcm_substream_t * substream) @@ -1048,15 +1060,12 @@ static int snd_intel8x0_pcm_prepare(snd_pcm_substream_t * substream) ichdev->physbuf = runtime->dma_addr; ichdev->size = snd_pcm_lib_buffer_bytes(substream); ichdev->fragsize = snd_pcm_lib_period_bytes(substream); - spin_lock_irq(&chip->reg_lock); if (ichdev->ichd == ICHD_PCMOUT) { snd_intel8x0_setup_pcm_out(chip, runtime); - if (chip->device_type == DEVICE_INTEL_ICH4) { + if (chip->device_type == DEVICE_INTEL_ICH4) ichdev->pos_shift = (runtime->sample_bits > 16) ? 2 : 1; - } } snd_intel8x0_setup_periods(chip, ichdev); - spin_unlock_irq(&chip->reg_lock); return 0; } @@ -2424,6 +2433,20 @@ static int intel8x0_resume(snd_card_t *card) } } + /* resume status */ + for (i = 0; i < chip->bdbars_count; i++) { + ichdev_t *ichdev = &chip->ichd[i]; + unsigned long port = ichdev->reg_offset; + if (! ichdev->substream || ! ichdev->suspended) + continue; + if (ichdev->ichd == ICHD_PCMOUT) + snd_intel8x0_setup_pcm_out(chip, ichdev->substream->runtime); + iputdword(chip, port + ICH_REG_OFF_BDBAR, ichdev->bdbar_addr); + iputbyte(chip, port + ICH_REG_OFF_LVI, ichdev->lvi); + iputbyte(chip, port + ICH_REG_OFF_CIV, ichdev->civ); + iputbyte(chip, port + ichdev->roff_sr, ICH_FIFOE | ICH_BCIS | ICH_LVBCI); + } + return 0; } #endif /* CONFIG_PM */ -- cgit v1.2.3 From 1204de32d0df87892e56062042e25c775ca0e08c Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Tue, 16 Aug 2005 16:54:12 +0200 Subject: [ALSA] nm256 - Fix PM and irq handling NM256 driver - Fixed the PCM resume - restoring the rate setting - Fixed the handling of buggy irqs - Dynamically acquire/release irq handler to make the driver more robust to unknown irq storms (as OSS driver does). Signed-off-by: Takashi Iwai --- sound/pci/nm256/nm256.c | 93 +++++++++++++++++++++++++++++++++++++------------ 1 file changed, 70 insertions(+), 23 deletions(-) diff --git a/sound/pci/nm256/nm256.c b/sound/pci/nm256/nm256.c index 7eb20b8f89f..2bbeb10ff7c 100644 --- a/sound/pci/nm256/nm256.c +++ b/sound/pci/nm256/nm256.c @@ -189,6 +189,7 @@ struct snd_nm256_stream { nm256_t *chip; snd_pcm_substream_t *substream; int running; + int suspended; u32 buf; /* offset from chip->buffer */ int bufsize; /* buffer size in bytes */ @@ -231,8 +232,10 @@ struct snd_nm256 { int mixer_status_mask; /* bit mask to test the mixer status */ int irq; + int irq_acks; irqreturn_t (*interrupt)(int, void *, struct pt_regs *); int badintrcount; /* counter to check bogus interrupts */ + struct semaphore irq_mutex; nm256_stream_t streams[2]; @@ -464,6 +467,37 @@ snd_nm256_set_format(nm256_t *chip, nm256_stream_t *s, snd_pcm_substream_t *subs } } +/* acquire interrupt */ +static int snd_nm256_acquire_irq(nm256_t *chip) +{ + down(&chip->irq_mutex); + if (chip->irq < 0) { + if (request_irq(chip->pci->irq, chip->interrupt, SA_INTERRUPT|SA_SHIRQ, + chip->card->driver, (void*)chip)) { + snd_printk("unable to grab IRQ %d\n", chip->pci->irq); + up(&chip->irq_mutex); + return -EBUSY; + } + chip->irq = chip->pci->irq; + } + chip->irq_acks++; + up(&chip->irq_mutex); + return 0; +} + +/* release interrupt */ +static void snd_nm256_release_irq(nm256_t *chip) +{ + down(&chip->irq_mutex); + if (chip->irq_acks > 0) + chip->irq_acks--; + if (chip->irq_acks == 0 && chip->irq >= 0) { + free_irq(chip->irq, (void*)chip); + chip->irq = -1; + } + up(&chip->irq_mutex); +} + /* * start / stop */ @@ -538,15 +572,19 @@ snd_nm256_playback_trigger(snd_pcm_substream_t *substream, int cmd) spin_lock(&chip->reg_lock); switch (cmd) { - case SNDRV_PCM_TRIGGER_START: case SNDRV_PCM_TRIGGER_RESUME: + s->suspended = 0; + /* fallthru */ + case SNDRV_PCM_TRIGGER_START: if (! s->running) { snd_nm256_playback_start(chip, s, substream); s->running = 1; } break; - case SNDRV_PCM_TRIGGER_STOP: case SNDRV_PCM_TRIGGER_SUSPEND: + s->suspended = 1; + /* fallthru */ + case SNDRV_PCM_TRIGGER_STOP: if (s->running) { snd_nm256_playback_stop(chip); s->running = 0; @@ -818,6 +856,8 @@ snd_nm256_playback_open(snd_pcm_substream_t *substream) { nm256_t *chip = snd_pcm_substream_chip(substream); + if (snd_nm256_acquire_irq(chip) < 0) + return -EBUSY; snd_nm256_setup_stream(chip, &chip->streams[SNDRV_PCM_STREAM_PLAYBACK], substream, &snd_nm256_playback); return 0; @@ -828,6 +868,8 @@ snd_nm256_capture_open(snd_pcm_substream_t *substream) { nm256_t *chip = snd_pcm_substream_chip(substream); + if (snd_nm256_acquire_irq(chip) < 0) + return -EBUSY; snd_nm256_setup_stream(chip, &chip->streams[SNDRV_PCM_STREAM_CAPTURE], substream, &snd_nm256_capture); return 0; @@ -839,6 +881,9 @@ snd_nm256_capture_open(snd_pcm_substream_t *substream) static int snd_nm256_playback_close(snd_pcm_substream_t *substream) { + nm256_t *chip = snd_pcm_substream_chip(substream); + + snd_nm256_release_irq(chip); return 0; } @@ -846,6 +891,9 @@ snd_nm256_playback_close(snd_pcm_substream_t *substream) static int snd_nm256_capture_close(snd_pcm_substream_t *substream) { + nm256_t *chip = snd_pcm_substream_chip(substream); + + snd_nm256_release_irq(chip); return 0; } @@ -915,18 +963,16 @@ snd_nm256_pcm(nm256_t *chip, int device) static void snd_nm256_init_chip(nm256_t *chip) { - spin_lock_irq(&chip->reg_lock); /* Reset everything. */ snd_nm256_writeb(chip, 0x0, 0x11); snd_nm256_writew(chip, 0x214, 0); /* stop sounds.. */ //snd_nm256_playback_stop(chip); //snd_nm256_capture_stop(chip); - spin_unlock_irq(&chip->reg_lock); } -static inline void +static irqreturn_t snd_nm256_intr_check(nm256_t *chip) { if (chip->badintrcount++ > 1000) { @@ -947,7 +993,9 @@ snd_nm256_intr_check(nm256_t *chip) if (chip->streams[SNDRV_PCM_STREAM_CAPTURE].running) snd_nm256_capture_stop(chip); chip->badintrcount = 0; + return IRQ_HANDLED; } + return IRQ_NONE; } /* @@ -969,10 +1017,8 @@ snd_nm256_interrupt(int irq, void *dev_id, struct pt_regs *dummy) status = snd_nm256_readw(chip, NM_INT_REG); /* Not ours. */ - if (status == 0) { - snd_nm256_intr_check(chip); - return IRQ_NONE; - } + if (status == 0) + return snd_nm256_intr_check(chip); chip->badintrcount = 0; @@ -1036,10 +1082,8 @@ snd_nm256_interrupt_zx(int irq, void *dev_id, struct pt_regs *dummy) status = snd_nm256_readl(chip, NM_INT_REG); /* Not ours. */ - if (status == 0) { - snd_nm256_intr_check(chip); - return IRQ_NONE; - } + if (status == 0) + return snd_nm256_intr_check(chip); chip->badintrcount = 0; @@ -1192,7 +1236,7 @@ snd_nm256_mixer(nm256_t *chip) AC97_PC_BEEP, AC97_PHONE, AC97_MIC, AC97_LINE, AC97_CD, AC97_VIDEO, AC97_AUX, AC97_PCM, AC97_REC_SEL, AC97_REC_GAIN, AC97_GENERAL_PURPOSE, AC97_3D_CONTROL, - AC97_EXTENDED_ID, + /*AC97_EXTENDED_ID,*/ AC97_VENDOR_ID1, AC97_VENDOR_ID2, -1 }; @@ -1206,6 +1250,7 @@ snd_nm256_mixer(nm256_t *chip) for (i = 0; mixer_regs[i] >= 0; i++) set_bit(mixer_regs[i], ac97.reg_accessed); ac97.private_data = chip; + pbus->no_vra = 1; err = snd_ac97_mixer(pbus, &ac97, &chip->ac97); if (err < 0) return err; @@ -1281,6 +1326,7 @@ static int nm256_suspend(snd_card_t *card, pm_message_t state) static int nm256_resume(snd_card_t *card) { nm256_t *chip = card->pm_private_data; + int i; /* Perform a full reset on the hardware */ pci_enable_device(chip->pci); @@ -1289,6 +1335,15 @@ static int nm256_resume(snd_card_t *card) /* restore ac97 */ snd_ac97_resume(chip->ac97); + for (i = 0; i < 2; i++) { + nm256_stream_t *s = &chip->streams[i]; + if (s->substream && s->suspended) { + spin_lock_irq(&chip->reg_lock); + snd_nm256_set_format(chip, s, s->substream); + spin_unlock_irq(&chip->reg_lock); + } + } + return 0; } #endif /* CONFIG_PM */ @@ -1360,6 +1415,7 @@ snd_nm256_create(snd_card_t *card, struct pci_dev *pci, chip->use_cache = usecache; spin_lock_init(&chip->reg_lock); chip->irq = -1; + init_MUTEX(&chip->irq_mutex); chip->streams[SNDRV_PCM_STREAM_PLAYBACK].bufsize = play_bufsize; chip->streams[SNDRV_PCM_STREAM_CAPTURE].bufsize = capt_bufsize; @@ -1470,15 +1526,6 @@ snd_nm256_create(snd_card_t *card, struct pci_dev *pci, chip->coeff_buf[SNDRV_PCM_STREAM_CAPTURE] = addr; } - /* acquire interrupt */ - if (request_irq(pci->irq, chip->interrupt, SA_INTERRUPT|SA_SHIRQ, - card->driver, (void*)chip)) { - err = -EBUSY; - snd_printk("unable to grab IRQ %d\n", pci->irq); - goto __error; - } - chip->irq = pci->irq; - /* Fixed setting. */ chip->mixer_base = NM_MIXER_OFFSET; -- cgit v1.2.3 From e8da2fbc2dd1fb4d603442f7220d23a2192955fa Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Tue, 16 Aug 2005 16:55:13 +0200 Subject: [ALSA] hdspm - Fix module parameter description RME9652 driver Fix the module parameter description after proofreading. Signed-off-by: Takashi Iwai --- sound/pci/rme9652/hdspm.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/sound/pci/rme9652/hdspm.c b/sound/pci/rme9652/hdspm.c index d4a0c2c56cd..5d786d113b2 100644 --- a/sound/pci/rme9652/hdspm.c +++ b/sound/pci/rme9652/hdspm.c @@ -65,7 +65,7 @@ module_param_array(enable, bool, NULL, 0444); MODULE_PARM_DESC(enable, "Enable/disable specific HDSPM soundcards."); module_param_array(precise_ptr, bool, NULL, 0444); -MODULE_PARM_DESC(precise_ptr, "Enable precise pointer, or disable."); +MODULE_PARM_DESC(precise_ptr, "Enable or disable precise pointer."); module_param_array(line_outs_monitor, bool, NULL, 0444); MODULE_PARM_DESC(line_outs_monitor, -- cgit v1.2.3 From 61be3ce0f2d9d80bc271e58c42cb9b021b3d48d8 Mon Sep 17 00:00:00 2001 From: Bjorge Dijkstra Date: Tue, 16 Aug 2005 17:05:05 +0200 Subject: [ALSA] ac97 - make ac97 codec device name unique AC97 Codec The patch fixes the bus_id conflict error when registering two codecs of the same type (ALSA bug#1334). Signed-off-by: Bjorge Dijkstra Signed-off-by: Takashi Iwai --- sound/pci/ac97/ac97_codec.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/sound/pci/ac97/ac97_codec.c b/sound/pci/ac97/ac97_codec.c index 600e053dfd3..5501f4440c9 100644 --- a/sound/pci/ac97/ac97_codec.c +++ b/sound/pci/ac97/ac97_codec.c @@ -1829,7 +1829,7 @@ static int snd_ac97_dev_register(snd_device_t *device) ac97->dev.parent = ac97->bus->card->dev; ac97->dev.platform_data = ac97; ac97->dev.release = ac97_device_release; - strncpy(ac97->dev.bus_id, snd_ac97_get_short_name(ac97), BUS_ID_SIZE); + snprintf(ac97->dev.bus_id, BUS_ID_SIZE, "card%d-%d", ac97->bus->card->number, ac97->num); if ((err = device_register(&ac97->dev)) < 0) { snd_printk(KERN_ERR "Can't register ac97 bus\n"); ac97->dev.bus = NULL; -- cgit v1.2.3 From 41e4845c426024ec41724326397a36b3aa2cb6a3 Mon Sep 17 00:00:00 2001 From: Jaroslav Kysela Date: Thu, 18 Aug 2005 13:43:12 +0200 Subject: [ALSA] PCM resume cleanups Digigram VX core,CS4231 driver,ATIIXP driver,VIA82xx driver VIA82xx-modem driver,au88x0 driver,CS46xx driver,Trident driver This patch disables SNDRV_PCM_INFO_RESUME flag for drivers which does not support the full resume. Signed-off-by: Jaroslav Kysela --- sound/drivers/vx/vx_pcm.c | 8 ++++---- sound/isa/cs423x/cs4231_lib.c | 2 ++ sound/pci/atiixp.c | 10 +++++++++- sound/pci/au88x0/au88x0_pcm.c | 6 +++--- sound/pci/cs46xx/cs46xx_lib.c | 8 ++++---- sound/pci/trident/trident_main.c | 10 +++++----- sound/pci/via82xx.c | 4 +++- sound/pci/via82xx_modem.c | 3 ++- 8 files changed, 32 insertions(+), 19 deletions(-) diff --git a/sound/drivers/vx/vx_pcm.c b/sound/drivers/vx/vx_pcm.c index af381b15fe5..d4becf44e24 100644 --- a/sound/drivers/vx/vx_pcm.c +++ b/sound/drivers/vx/vx_pcm.c @@ -549,8 +549,8 @@ static int vx_stop_stream(vx_core_t *chip, vx_pipe_t *pipe) static snd_pcm_hardware_t vx_pcm_playback_hw = { .info = (SNDRV_PCM_INFO_MMAP | SNDRV_PCM_INFO_INTERLEAVED | - SNDRV_PCM_INFO_PAUSE | SNDRV_PCM_INFO_MMAP_VALID | - SNDRV_PCM_INFO_RESUME), + SNDRV_PCM_INFO_PAUSE | SNDRV_PCM_INFO_MMAP_VALID /*|*/ + /*SNDRV_PCM_INFO_RESUME*/), .formats = /*SNDRV_PCM_FMTBIT_U8 |*/ SNDRV_PCM_FMTBIT_S16_LE | SNDRV_PCM_FMTBIT_S24_3LE, .rates = SNDRV_PCM_RATE_CONTINUOUS | SNDRV_PCM_RATE_8000_48000, .rate_min = 5000, @@ -949,8 +949,8 @@ static snd_pcm_ops_t vx_pcm_playback_ops = { static snd_pcm_hardware_t vx_pcm_capture_hw = { .info = (SNDRV_PCM_INFO_MMAP | SNDRV_PCM_INFO_INTERLEAVED | - SNDRV_PCM_INFO_PAUSE | SNDRV_PCM_INFO_MMAP_VALID | - SNDRV_PCM_INFO_RESUME), + SNDRV_PCM_INFO_PAUSE | SNDRV_PCM_INFO_MMAP_VALID /*|*/ + /*SNDRV_PCM_INFO_RESUME*/), .formats = /*SNDRV_PCM_FMTBIT_U8 |*/ SNDRV_PCM_FMTBIT_S16_LE | SNDRV_PCM_FMTBIT_S24_3LE, .rates = SNDRV_PCM_RATE_CONTINUOUS | SNDRV_PCM_RATE_8000_48000, .rate_min = 5000, diff --git a/sound/isa/cs423x/cs4231_lib.c b/sound/isa/cs423x/cs4231_lib.c index 3e7a2a33a5c..3199941edd9 100644 --- a/sound/isa/cs423x/cs4231_lib.c +++ b/sound/isa/cs423x/cs4231_lib.c @@ -1346,6 +1346,8 @@ static void snd_cs4231_suspend(cs4231_t *chip) int reg; unsigned long flags; + if (chip->pcm) + snd_pcm_suspend_all(chip->pcm); spin_lock_irqsave(&chip->reg_lock, flags); for (reg = 0; reg < 32; reg++) chip->image[reg] = snd_cs4231_in(chip, reg); diff --git a/sound/pci/atiixp.c b/sound/pci/atiixp.c index cafab4af5c5..904d17394e1 100644 --- a/sound/pci/atiixp.c +++ b/sound/pci/atiixp.c @@ -248,6 +248,7 @@ struct snd_atiixp_dma { unsigned int period_bytes, periods; int opened; int running; + int suspended; int pcm_open_flag; int ac97_pcm_type; /* index # of ac97_pcm to access, -1 = not used */ unsigned int saved_curptr; @@ -699,12 +700,18 @@ static int snd_atiixp_pcm_trigger(snd_pcm_substream_t *substream, int cmd) spin_lock(&chip->reg_lock); switch (cmd) { case SNDRV_PCM_TRIGGER_START: + case SNDRV_PCM_TRIGGER_PAUSE_RELEASE: + case SNDRV_PCM_TRIGGER_RESUME: dma->ops->enable_transfer(chip, 1); dma->running = 1; + dma->suspended = 0; break; case SNDRV_PCM_TRIGGER_STOP: + case SNDRV_PCM_TRIGGER_PAUSE_PUSH: + case SNDRV_PCM_TRIGGER_SUSPEND: dma->ops->enable_transfer(chip, 0); dma->running = 0; + dma->suspended = cmd == SNDRV_PCM_TRIGGER_SUSPEND; break; default: err = -EINVAL; @@ -975,6 +982,7 @@ static snd_pcm_hardware_t snd_atiixp_pcm_hw = { .info = (SNDRV_PCM_INFO_MMAP | SNDRV_PCM_INFO_INTERLEAVED | SNDRV_PCM_INFO_BLOCK_TRANSFER | + SNDRV_PCM_INFO_PAUSE | SNDRV_PCM_INFO_RESUME | SNDRV_PCM_INFO_MMAP_VALID), .formats = SNDRV_PCM_FMTBIT_S16_LE | SNDRV_PCM_FMTBIT_S32_LE, @@ -1443,7 +1451,7 @@ static int snd_atiixp_resume(snd_card_t *card) for (i = 0; i < NUM_ATI_PCMDEVS; i++) if (chip->pcmdevs[i]) { atiixp_dma_t *dma = &chip->dmas[i]; - if (dma->substream && dma->running) { + if (dma->substream && dma->suspended) { dma->ops->enable_dma(chip, 1); writel((u32)dma->desc_buf.addr | ATI_REG_LINKPTR_EN, chip->remap_addr + dma->ops->llp_offset); diff --git a/sound/pci/au88x0/au88x0_pcm.c b/sound/pci/au88x0/au88x0_pcm.c index 04dcefd8b8f..de95bd6d1ee 100644 --- a/sound/pci/au88x0/au88x0_pcm.c +++ b/sound/pci/au88x0/au88x0_pcm.c @@ -33,7 +33,7 @@ /* hardware definition */ static snd_pcm_hardware_t snd_vortex_playback_hw_adb = { .info = - (SNDRV_PCM_INFO_MMAP | SNDRV_PCM_INFO_RESUME | + (SNDRV_PCM_INFO_MMAP | /* SNDRV_PCM_INFO_RESUME | */ SNDRV_PCM_INFO_PAUSE | SNDRV_PCM_INFO_INTERLEAVED | SNDRV_PCM_INFO_MMAP_VALID), .formats = @@ -58,7 +58,7 @@ static snd_pcm_hardware_t snd_vortex_playback_hw_adb = { #ifndef CHIP_AU8820 static snd_pcm_hardware_t snd_vortex_playback_hw_a3d = { .info = - (SNDRV_PCM_INFO_MMAP | SNDRV_PCM_INFO_RESUME | + (SNDRV_PCM_INFO_MMAP | /* SNDRV_PCM_INFO_RESUME | */ SNDRV_PCM_INFO_PAUSE | SNDRV_PCM_INFO_INTERLEAVED | SNDRV_PCM_INFO_MMAP_VALID), .formats = @@ -78,7 +78,7 @@ static snd_pcm_hardware_t snd_vortex_playback_hw_a3d = { #endif static snd_pcm_hardware_t snd_vortex_playback_hw_spdif = { .info = - (SNDRV_PCM_INFO_MMAP | SNDRV_PCM_INFO_RESUME | + (SNDRV_PCM_INFO_MMAP | /* SNDRV_PCM_INFO_RESUME | */ SNDRV_PCM_INFO_PAUSE | SNDRV_PCM_INFO_INTERLEAVED | SNDRV_PCM_INFO_MMAP_VALID), .formats = diff --git a/sound/pci/cs46xx/cs46xx_lib.c b/sound/pci/cs46xx/cs46xx_lib.c index 5eb9e0bb910..4b052158ee3 100644 --- a/sound/pci/cs46xx/cs46xx_lib.c +++ b/sound/pci/cs46xx/cs46xx_lib.c @@ -1243,8 +1243,8 @@ static snd_pcm_hardware_t snd_cs46xx_playback = { .info = (SNDRV_PCM_INFO_MMAP | SNDRV_PCM_INFO_INTERLEAVED | - SNDRV_PCM_INFO_BLOCK_TRANSFER | - SNDRV_PCM_INFO_RESUME), + SNDRV_PCM_INFO_BLOCK_TRANSFER /*|*/ + /*SNDRV_PCM_INFO_RESUME*/), .formats = (SNDRV_PCM_FMTBIT_S8 | SNDRV_PCM_FMTBIT_U8 | SNDRV_PCM_FMTBIT_S16_LE | SNDRV_PCM_FMTBIT_S16_BE | SNDRV_PCM_FMTBIT_U16_LE | SNDRV_PCM_FMTBIT_U16_BE), @@ -1265,8 +1265,8 @@ static snd_pcm_hardware_t snd_cs46xx_capture = { .info = (SNDRV_PCM_INFO_MMAP | SNDRV_PCM_INFO_INTERLEAVED | - SNDRV_PCM_INFO_BLOCK_TRANSFER | - SNDRV_PCM_INFO_RESUME), + SNDRV_PCM_INFO_BLOCK_TRANSFER /*|*/ + /*SNDRV_PCM_INFO_RESUME*/), .formats = SNDRV_PCM_FMTBIT_S16_LE, .rates = SNDRV_PCM_RATE_CONTINUOUS | SNDRV_PCM_RATE_8000_48000, .rate_min = 5500, diff --git a/sound/pci/trident/trident_main.c b/sound/pci/trident/trident_main.c index 29d89bfba0a..f30d9d94786 100644 --- a/sound/pci/trident/trident_main.c +++ b/sound/pci/trident/trident_main.c @@ -1689,7 +1689,7 @@ static snd_pcm_hardware_t snd_trident_playback = .info = (SNDRV_PCM_INFO_MMAP | SNDRV_PCM_INFO_INTERLEAVED | SNDRV_PCM_INFO_BLOCK_TRANSFER | SNDRV_PCM_INFO_MMAP_VALID | SNDRV_PCM_INFO_SYNC_START | - SNDRV_PCM_INFO_PAUSE | SNDRV_PCM_INFO_RESUME), + SNDRV_PCM_INFO_PAUSE /* | SNDRV_PCM_INFO_RESUME */), .formats = (SNDRV_PCM_FMTBIT_U8 | SNDRV_PCM_FMTBIT_S16_LE | SNDRV_PCM_FMTBIT_S8 | SNDRV_PCM_FMTBIT_U16_LE), .rates = SNDRV_PCM_RATE_CONTINUOUS | SNDRV_PCM_RATE_8000_48000, @@ -1714,7 +1714,7 @@ static snd_pcm_hardware_t snd_trident_capture = .info = (SNDRV_PCM_INFO_MMAP | SNDRV_PCM_INFO_INTERLEAVED | SNDRV_PCM_INFO_BLOCK_TRANSFER | SNDRV_PCM_INFO_MMAP_VALID | SNDRV_PCM_INFO_SYNC_START | - SNDRV_PCM_INFO_PAUSE | SNDRV_PCM_INFO_RESUME), + SNDRV_PCM_INFO_PAUSE /* | SNDRV_PCM_INFO_RESUME */), .formats = (SNDRV_PCM_FMTBIT_U8 | SNDRV_PCM_FMTBIT_S16_LE | SNDRV_PCM_FMTBIT_S8 | SNDRV_PCM_FMTBIT_U16_LE), .rates = SNDRV_PCM_RATE_CONTINUOUS | SNDRV_PCM_RATE_8000_48000, @@ -1739,7 +1739,7 @@ static snd_pcm_hardware_t snd_trident_foldback = .info = (SNDRV_PCM_INFO_MMAP | SNDRV_PCM_INFO_INTERLEAVED | SNDRV_PCM_INFO_BLOCK_TRANSFER | SNDRV_PCM_INFO_MMAP_VALID | SNDRV_PCM_INFO_SYNC_START | - SNDRV_PCM_INFO_PAUSE | SNDRV_PCM_INFO_RESUME), + SNDRV_PCM_INFO_PAUSE /* | SNDRV_PCM_INFO_RESUME */), .formats = SNDRV_PCM_FMTBIT_S16_LE, .rates = SNDRV_PCM_RATE_48000, .rate_min = 48000, @@ -1763,7 +1763,7 @@ static snd_pcm_hardware_t snd_trident_spdif = .info = (SNDRV_PCM_INFO_MMAP | SNDRV_PCM_INFO_INTERLEAVED | SNDRV_PCM_INFO_BLOCK_TRANSFER | SNDRV_PCM_INFO_MMAP_VALID | SNDRV_PCM_INFO_SYNC_START | - SNDRV_PCM_INFO_PAUSE | SNDRV_PCM_INFO_RESUME), + SNDRV_PCM_INFO_PAUSE /* | SNDRV_PCM_INFO_RESUME */), .formats = SNDRV_PCM_FMTBIT_S16_LE, .rates = (SNDRV_PCM_RATE_32000 | SNDRV_PCM_RATE_44100 | SNDRV_PCM_RATE_48000), @@ -1784,7 +1784,7 @@ static snd_pcm_hardware_t snd_trident_spdif_7018 = .info = (SNDRV_PCM_INFO_MMAP | SNDRV_PCM_INFO_INTERLEAVED | SNDRV_PCM_INFO_BLOCK_TRANSFER | SNDRV_PCM_INFO_MMAP_VALID | SNDRV_PCM_INFO_SYNC_START | - SNDRV_PCM_INFO_PAUSE | SNDRV_PCM_INFO_RESUME), + SNDRV_PCM_INFO_PAUSE /* | SNDRV_PCM_INFO_RESUME */), .formats = SNDRV_PCM_FMTBIT_S16_LE, .rates = SNDRV_PCM_RATE_48000, .rate_min = 48000, diff --git a/sound/pci/via82xx.c b/sound/pci/via82xx.c index 819f27b2762..52ec785c550 100644 --- a/sound/pci/via82xx.c +++ b/sound/pci/via82xx.c @@ -663,10 +663,12 @@ static int snd_via82xx_pcm_trigger(snd_pcm_substream_t * substream, int cmd) val = 0; switch (cmd) { case SNDRV_PCM_TRIGGER_START: + case SNDRV_PCM_TRIGGER_RESUME: val |= VIA_REG_CTRL_START; viadev->running = 1; break; case SNDRV_PCM_TRIGGER_STOP: + case SNDRV_PCM_TRIGGER_SUSPEND: val = VIA_REG_CTRL_TERMINATE; viadev->running = 0; break; @@ -1035,7 +1037,7 @@ static snd_pcm_hardware_t snd_via82xx_hw = .info = (SNDRV_PCM_INFO_MMAP | SNDRV_PCM_INFO_INTERLEAVED | SNDRV_PCM_INFO_BLOCK_TRANSFER | SNDRV_PCM_INFO_MMAP_VALID | - SNDRV_PCM_INFO_RESUME | + /* SNDRV_PCM_INFO_RESUME | */ SNDRV_PCM_INFO_PAUSE), .formats = SNDRV_PCM_FMTBIT_U8 | SNDRV_PCM_FMTBIT_S16_LE, .rates = SNDRV_PCM_RATE_48000, diff --git a/sound/pci/via82xx_modem.c b/sound/pci/via82xx_modem.c index 4a9779cc973..5872d438a04 100644 --- a/sound/pci/via82xx_modem.c +++ b/sound/pci/via82xx_modem.c @@ -521,6 +521,7 @@ static int snd_via82xx_pcm_trigger(snd_pcm_substream_t * substream, int cmd) switch (cmd) { case SNDRV_PCM_TRIGGER_START: + case SNDRV_PCM_TRIGGER_SUSPEND: val |= VIA_REG_CTRL_START; viadev->running = 1; break; @@ -697,7 +698,7 @@ static snd_pcm_hardware_t snd_via82xx_hw = .info = (SNDRV_PCM_INFO_MMAP | SNDRV_PCM_INFO_INTERLEAVED | SNDRV_PCM_INFO_BLOCK_TRANSFER | SNDRV_PCM_INFO_MMAP_VALID | - SNDRV_PCM_INFO_RESUME | + /* SNDRV_PCM_INFO_RESUME | */ SNDRV_PCM_INFO_PAUSE), .formats = SNDRV_PCM_FMTBIT_U8 | SNDRV_PCM_FMTBIT_S16_LE, .rates = SNDRV_PCM_RATE_8000 | SNDRV_PCM_RATE_16000 | SNDRV_PCM_RATE_KNOT, -- cgit v1.2.3 From 352dbfd0e6eb7733bcca79c14f8711bb86b55e4e Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Fri, 19 Aug 2005 17:49:10 +0200 Subject: [ALSA] via82xx - Add DXS entry for MSI 7142 VIA82xx driver Added the DXS entry for MSI 7142 (K8MM-V). Signed-off-by: Takashi Iwai --- sound/pci/via82xx.c | 1 + 1 file changed, 1 insertion(+) diff --git a/sound/pci/via82xx.c b/sound/pci/via82xx.c index 52ec785c550..56c6e52d726 100644 --- a/sound/pci/via82xx.c +++ b/sound/pci/via82xx.c @@ -2171,6 +2171,7 @@ static int __devinit check_dxs_list(struct pci_dev *pci) { .subvendor = 0x1297, .subdevice = 0xc160, .action = VIA_DXS_ENABLE }, /* Shuttle SK41G */ { .subvendor = 0x1458, .subdevice = 0xa002, .action = VIA_DXS_ENABLE }, /* Gigabyte GA-7VAXP */ { .subvendor = 0x1462, .subdevice = 0x0080, .action = VIA_DXS_SRC }, /* MSI K8T Neo-FIS2R */ + { .subvendor = 0x1462, .subdevice = 0x0430, .action = VIA_DXS_SRC }, /* MSI 7142 (K8MM-V) */ { .subvendor = 0x1462, .subdevice = 0x3800, .action = VIA_DXS_ENABLE }, /* MSI KT266 */ { .subvendor = 0x1462, .subdevice = 0x5901, .action = VIA_DXS_NO_VRA }, /* MSI KT6 Delta-SR */ { .subvendor = 0x1462, .subdevice = 0x7023, .action = VIA_DXS_NO_VRA }, /* MSI K8T Neo2-FI */ -- cgit v1.2.3 From 34ad73b9c5b5b25b795136c23f65b9a3ac21130b Mon Sep 17 00:00:00 2001 From: Jaroslav Kysela Date: Mon, 22 Aug 2005 11:30:37 +0200 Subject: [ALSA] ac97_bus - replace with for consistency AC97 Codec Signed-off-by: Jaroslav Kysela --- sound/pci/ac97/ac97_bus.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/sound/pci/ac97/ac97_bus.c b/sound/pci/ac97/ac97_bus.c index 227f8b9f67c..013a919c254 100644 --- a/sound/pci/ac97/ac97_bus.c +++ b/sound/pci/ac97/ac97_bus.c @@ -11,7 +11,7 @@ * (at your option) any later version. */ -#include +#include #include #include #include -- cgit v1.2.3 From 5049c35b1389097a1c0c7686519928eaaf31e40b Mon Sep 17 00:00:00 2001 From: Jaroslav Kysela Date: Mon, 22 Aug 2005 12:19:14 +0200 Subject: [ALSA] ac97_bus - revert last change and do it only in the ALSA tree AC97 Codec Signed-off-by: Jaroslav Kysela --- sound/pci/ac97/ac97_bus.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/sound/pci/ac97/ac97_bus.c b/sound/pci/ac97/ac97_bus.c index 013a919c254..227f8b9f67c 100644 --- a/sound/pci/ac97/ac97_bus.c +++ b/sound/pci/ac97/ac97_bus.c @@ -11,7 +11,7 @@ * (at your option) any later version. */ -#include +#include #include #include #include -- cgit v1.2.3 From 66d10647feb32178e1204d5b5c7126b1731efe9c Mon Sep 17 00:00:00 2001 From: Sergey Vlasov Date: Mon, 22 Aug 2005 13:43:39 +0200 Subject: [ALSA] HP nx6110 quirks Intel8x0 driver,AC97 Codec The HP nx6110 laptop needs to have Headphone Jack Sense enabled so that the internal speakers will be turned off when headphones are plugged in. Also ac97_quirk=hp_only is needed to make a single Master volume in the mixer instead of separate volumes for internal speakers and headphones, which just confuses the user. Signed-off-by: Sergey Vlasov Signed-off-by: Takashi Iwai --- sound/pci/ac97/ac97_patch.c | 1 + sound/pci/intel8x0.c | 6 ++++++ 2 files changed, 7 insertions(+) diff --git a/sound/pci/ac97/ac97_patch.c b/sound/pci/ac97/ac97_patch.c index 616504ef370..b584172c110 100644 --- a/sound/pci/ac97/ac97_patch.c +++ b/sound/pci/ac97/ac97_patch.c @@ -1629,6 +1629,7 @@ static void check_ad1981_hp_jack_sense(ac97_t *ac97) u32 subid = ((u32)ac97->subsystem_vendor << 16) | ac97->subsystem_device; switch (subid) { case 0x103c0890: /* HP nc6000 */ + case 0x103c099c: /* HP nx6110 */ case 0x103c006d: /* HP nx9105 */ case 0x17340088: /* FSC Scenic-W */ /* enable headphone jack sense */ diff --git a/sound/pci/intel8x0.c b/sound/pci/intel8x0.c index 390b6c8f9a1..e38984dc4d9 100644 --- a/sound/pci/intel8x0.c +++ b/sound/pci/intel8x0.c @@ -1824,6 +1824,12 @@ static struct ac97_quirk ac97_quirks[] __devinitdata = { .name = "HP nc6000", .type = AC97_TUNE_MUTE_LED }, + { + .subvendor = 0x103c, + .subdevice = 0x099c, + .name = "HP nx6110", /* AD1981B */ + .type = AC97_TUNE_HP_ONLY + }, { .subvendor = 0x103c, .subdevice = 0x129d, -- cgit v1.2.3 From 9d8f53f2bba3c2c06e1e78126222aecf91f8ecdd Mon Sep 17 00:00:00 2001 From: Nicolas Graziano Date: Mon, 22 Aug 2005 13:47:16 +0200 Subject: [ALSA] hda-intel - correct a bug in detection of rate supported HDA Codec driver The insertion of the rate 9600 make a shift in detection of supported rate, put this rate at the end of the list. Signed-off-by: Nicolas Graziano Signed-off-by: Takashi Iwai --- sound/pci/hda/hda_codec.c | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-) diff --git a/sound/pci/hda/hda_codec.c b/sound/pci/hda/hda_codec.c index 6bfb081d12d..e067a14a2d9 100644 --- a/sound/pci/hda/hda_codec.c +++ b/sound/pci/hda/hda_codec.c @@ -1165,8 +1165,9 @@ int snd_hda_build_controls(struct hda_bus *bus) */ static unsigned int rate_bits[][3] = { /* rate in Hz, ALSA rate bitmask, HDA format value */ + + /* autodetected value used in snd_hda_query_supported_pcm */ { 8000, SNDRV_PCM_RATE_8000, 0x0500 }, /* 1/6 x 48 */ - { 9600, SNDRV_PCM_RATE_KNOT, 0x0400 }, /* 1/5 x 48 */ { 11025, SNDRV_PCM_RATE_11025, 0x4300 }, /* 1/4 x 44 */ { 16000, SNDRV_PCM_RATE_16000, 0x0200 }, /* 1/3 x 48 */ { 22050, SNDRV_PCM_RATE_22050, 0x4100 }, /* 1/2 x 44 */ @@ -1177,6 +1178,9 @@ static unsigned int rate_bits[][3] = { { 96000, SNDRV_PCM_RATE_96000, 0x0800 }, /* 2 x 48 */ { 176400, SNDRV_PCM_RATE_176400, 0x5800 },/* 4 x 44 */ { 192000, SNDRV_PCM_RATE_192000, 0x1800 }, /* 4 x 48 */ + + /* not autodetected value */ + { 9600, SNDRV_PCM_RATE_KNOT, 0x0400 }, /* 1/5 x 48 */ { 0 } }; -- cgit v1.2.3 From befdf316eaba02ed52284fb78a8027ff35c6a736 Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Mon, 22 Aug 2005 13:57:55 +0200 Subject: [ALSA] hda-codec - Code clean up HDA Codec driver Use struct instead of array to improve the readability of hda_codec.c. Signed-off-by: Takashi Iwai --- sound/pci/hda/hda_codec.c | 29 ++++++++++++++++++----------- 1 file changed, 18 insertions(+), 11 deletions(-) diff --git a/sound/pci/hda/hda_codec.c b/sound/pci/hda/hda_codec.c index e067a14a2d9..20f7762f714 100644 --- a/sound/pci/hda/hda_codec.c +++ b/sound/pci/hda/hda_codec.c @@ -1163,7 +1163,13 @@ int snd_hda_build_controls(struct hda_bus *bus) /* * stream formats */ -static unsigned int rate_bits[][3] = { +struct hda_rate_tbl { + unsigned int hz; + unsigned int alsa_bits; + unsigned int hda_fmt; +}; + +static struct hda_rate_tbl rate_bits[] = { /* rate in Hz, ALSA rate bitmask, HDA format value */ /* autodetected value used in snd_hda_query_supported_pcm */ @@ -1181,7 +1187,8 @@ static unsigned int rate_bits[][3] = { /* not autodetected value */ { 9600, SNDRV_PCM_RATE_KNOT, 0x0400 }, /* 1/5 x 48 */ - { 0 } + + { 0 } /* terminator */ }; /** @@ -1203,12 +1210,12 @@ unsigned int snd_hda_calc_stream_format(unsigned int rate, int i; unsigned int val = 0; - for (i = 0; rate_bits[i][0]; i++) - if (rate_bits[i][0] == rate) { - val = rate_bits[i][2]; + for (i = 0; rate_bits[i].hz; i++) + if (rate_bits[i].hz == rate) { + val = rate_bits[i].hda_fmt; break; } - if (! rate_bits[i][0]) { + if (! rate_bits[i].hz) { snd_printdd("invalid rate %d\n", rate); return 0; } @@ -1271,9 +1278,9 @@ int snd_hda_query_supported_pcm(struct hda_codec *codec, hda_nid_t nid, if (ratesp) { u32 rates = 0; - for (i = 0; rate_bits[i][0]; i++) { + for (i = 0; rate_bits[i].hz; i++) { if (val & (1 << i)) - rates |= rate_bits[i][1]; + rates |= rate_bits[i].alsa_bits; } *ratesp = rates; } @@ -1365,13 +1372,13 @@ int snd_hda_is_supported_format(struct hda_codec *codec, hda_nid_t nid, } rate = format & 0xff00; - for (i = 0; rate_bits[i][0]; i++) - if (rate_bits[i][2] == rate) { + for (i = 0; rate_bits[i].hz; i++) + if (rate_bits[i].hda_fmt == rate) { if (val & (1 << i)) break; return 0; } - if (! rate_bits[i][0]) + if (! rate_bits[i].hz) return 0; stream = snd_hda_param_read(codec, nid, AC_PAR_STREAM); -- cgit v1.2.3 From e0be4d32bdae5cebc4e6d9dc65886e279aa69d08 Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Tue, 23 Aug 2005 11:11:03 +0200 Subject: [ALSA] Fix compilation without CONFIG_PROC_FS Memalloc module Fix an error when built without CONFIG_PROC_FS. Signed-off-by: Takashi Iwai --- sound/core/memalloc.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) diff --git a/sound/core/memalloc.c b/sound/core/memalloc.c index 371215cd9e8..39a54a41552 100644 --- a/sound/core/memalloc.c +++ b/sound/core/memalloc.c @@ -655,8 +655,7 @@ static int __init snd_mem_init(void) static void __exit snd_mem_exit(void) { - if (snd_mem_proc) - remove_proc_entry(SND_MEM_PROC_FILE, NULL); + remove_proc_entry(SND_MEM_PROC_FILE, NULL); free_all_reserved_pages(); if (snd_allocated_pages > 0) printk(KERN_ERR "snd-malloc: Memory leak? pages not freed = %li\n", snd_allocated_pages); -- cgit v1.2.3 From 328ac7da6f49f2c8b8af349fef525ad79b4a3987 Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Tue, 23 Aug 2005 15:50:41 +0200 Subject: [ALSA] vxpocket - Add missing event callback Digigram VX Pocket driver Added the missing event callback. Signed-off-by: Takashi Iwai --- sound/pcmcia/vx/vxpocket.c | 9 +++++---- 1 file changed, 5 insertions(+), 4 deletions(-) diff --git a/sound/pcmcia/vx/vxpocket.c b/sound/pcmcia/vx/vxpocket.c index 3a82161d3b2..fcb952f94ef 100644 --- a/sound/pcmcia/vx/vxpocket.c +++ b/sound/pcmcia/vx/vxpocket.c @@ -376,7 +376,7 @@ static int vxpocket_event(event_t event, int priority, event_callback_args_t *ar /* */ -static dev_link_t *vxp_attach(void) +static dev_link_t *vxpocket_attach(void) { snd_card_t *card; struct snd_vxpocket *vxp; @@ -417,7 +417,7 @@ static dev_link_t *vxp_attach(void) return &vxp->link; } -static void vxp_detach(dev_link_t *link) +static void vxpocket_detach(dev_link_t *link) { struct snd_vxpocket *vxp; vx_core_t *chip; @@ -458,8 +458,9 @@ static struct pcmcia_driver vxp_cs_driver = { .drv = { .name = "snd-vxpocket", }, - .attach = vxp_attach, - .detach = vxp_detach, + .attach = vxpocket_attach, + .detach = vxpocket_detach, + .event = vxpocket_event, .id_table = vxp_ids, }; -- cgit v1.2.3 From adf111e6ff1674b81cae3ff7cdd5a5d1edf003f0 Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Tue, 23 Aug 2005 19:01:38 +0200 Subject: [ALSA] vxpocket - Fix wrong index assignment Digigram VX Pocket driver Fixed the wrong index number assignment. Signed-off-by: Takashi Iwai --- sound/pcmcia/vx/vxpocket.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/sound/pcmcia/vx/vxpocket.c b/sound/pcmcia/vx/vxpocket.c index fcb952f94ef..de5bb9c26b7 100644 --- a/sound/pcmcia/vx/vxpocket.c +++ b/sound/pcmcia/vx/vxpocket.c @@ -407,7 +407,7 @@ static dev_link_t *vxpocket_attach(void) return NULL; } - vxp->index = index[i]; + vxp->index = i; card_alloc |= 1 << i; /* Chain drivers */ -- cgit v1.2.3 From 5ba094dbf14828858cdff27c8201df33b7a0bc96 Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Tue, 23 Aug 2005 19:27:31 +0200 Subject: [ALSA] vxpocket - Register device pointer Digigram VX Pocket driver Add snd_card_set_dev() to register the device pointer. Signed-off-by: Takashi Iwai --- sound/pcmcia/vx/vxpocket.c | 1 + 1 file changed, 1 insertion(+) diff --git a/sound/pcmcia/vx/vxpocket.c b/sound/pcmcia/vx/vxpocket.c index de5bb9c26b7..1e8f16b4c07 100644 --- a/sound/pcmcia/vx/vxpocket.c +++ b/sound/pcmcia/vx/vxpocket.c @@ -297,6 +297,7 @@ static void vxpocket_config(dev_link_t *link) CS_CHECK(RequestConfiguration, pcmcia_request_configuration(link->handle, &link->conf)); chip->dev = &handle_to_dev(link->handle); + snd_card_set_dev(chip->card, chip->dev); if (snd_vxpocket_assign_resources(chip, link->io.BasePort1, link->irq.AssignedIRQ) < 0) goto failed; -- cgit v1.2.3 From 3c10a9d9f8c76fd87c92a14c201ae211d0b81288 Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Tue, 23 Aug 2005 20:02:27 +0200 Subject: [ALSA] hda-codec - Add beep support for Uniwill HDA Codec driver Added the missing beep support for Uniwill laptop (ALSA bug#1358). Signed-off-by: Takashi Iwai --- sound/pci/hda/patch_realtek.c | 8 +++++++- 1 file changed, 7 insertions(+), 1 deletion(-) diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c index d19da2bae66..eeb900ab79a 100644 --- a/sound/pci/hda/patch_realtek.c +++ b/sound/pci/hda/patch_realtek.c @@ -687,6 +687,12 @@ static snd_kcontrol_new_t alc880_asus_w1v_mixer[] = { { } /* end */ }; +/* additional mixers to alc880_asus_mixer */ +static snd_kcontrol_new_t alc880_pcbeep_mixer[] = { + HDA_CODEC_VOLUME("PC Speaker Playback Volume", 0x0b, 0x05, HDA_INPUT), + HDA_CODEC_MUTE("PC Speaker Playback Switch", 0x0b, 0x05, HDA_INPUT), + { } /* end */ +}; /* * build control elements @@ -1735,7 +1741,7 @@ static struct alc_config_preset alc880_presets[] = { .input_mux = &alc880_capture_source, }, [ALC880_UNIWILL_DIG] = { - .mixers = { alc880_asus_mixer }, + .mixers = { alc880_asus_mixer, alc880_pcbeep_mixer }, .init_verbs = { alc880_volume_init_verbs, alc880_pin_asus_init_verbs }, .num_dacs = ARRAY_SIZE(alc880_asus_dac_nids), .dac_nids = alc880_asus_dac_nids, -- cgit v1.2.3 From 07e4ca50a5f82aa6eab52e348059579b250c63db Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Wed, 24 Aug 2005 14:14:57 +0200 Subject: [ALSA] hda-intel - Fix ULI M5461 support HDA Intel driver Fix and clean up for the support of ULI M5461 - set CORB/RIRB sizes explicitly - add workarounds for ULI on ia32 - max number of streams depends on the chip type now - increase the size of BDL Signed-off-by: Takashi Iwai --- sound/pci/hda/hda_intel.c | 150 ++++++++++++++++++++++++++++++++++++---------- 1 file changed, 117 insertions(+), 33 deletions(-) diff --git a/sound/pci/hda/hda_intel.c b/sound/pci/hda/hda_intel.c index 58e15b8896a..15107df1f49 100644 --- a/sound/pci/hda/hda_intel.c +++ b/sound/pci/hda/hda_intel.c @@ -72,7 +72,8 @@ MODULE_SUPPORTED_DEVICE("{{Intel, ICH6}," "{ATI, SB450}," "{VIA, VT8251}," "{VIA, VT8237A}," - "{SiS, SIS966}}"); + "{SiS, SIS966}," + "{ULI, M5461}}"); MODULE_DESCRIPTION("Intel HDA driver"); #define SFX "hda-intel: " @@ -142,9 +143,24 @@ enum { SDI0, SDI1, SDI2, SDI3, SDO0, SDO1, SDO2, SDO3 }; */ /* max number of SDs */ -#define MAX_ICH6_DEV 8 +/* ICH, ATI and VIA have 4 playback and 4 capture */ +#define ICH6_CAPTURE_INDEX 0 +#define ICH6_NUM_CAPTURE 4 +#define ICH6_PLAYBACK_INDEX 4 +#define ICH6_NUM_PLAYBACK 4 + +/* ULI has 6 playback and 5 capture */ +#define ULI_CAPTURE_INDEX 0 +#define ULI_NUM_CAPTURE 5 +#define ULI_PLAYBACK_INDEX 5 +#define ULI_NUM_PLAYBACK 6 + +/* this number is statically defined for simplicity */ +#define MAX_AZX_DEV 16 + /* max number of fragments - we may use more if allocating more pages for BDL */ -#define AZX_MAX_FRAG (PAGE_SIZE / (MAX_ICH6_DEV * 16)) +#define BDL_SIZE PAGE_ALIGN(8192) +#define AZX_MAX_FRAG (BDL_SIZE / (MAX_AZX_DEV * 16)) /* max buffer size - no h/w limit, you can increase as you like */ #define AZX_MAX_BUF_SIZE (1024*1024*1024) /* max number of PCM devics per card */ @@ -201,7 +217,6 @@ enum { }; /* Defines for ATI HD Audio support in SB450 south bridge */ -#define ATI_SB450_HDAUDIO_PCI_DEVICE_ID 0x437b #define ATI_SB450_HDAUDIO_MISC_CNTR2_ADDR 0x42 #define ATI_SB450_HDAUDIO_ENABLE_SNOOP 0x02 @@ -259,6 +274,14 @@ struct snd_azx { snd_card_t *card; struct pci_dev *pci; + /* chip type specific */ + int driver_type; + int playback_streams; + int playback_index_offset; + int capture_streams; + int capture_index_offset; + int num_streams; + /* pci resources */ unsigned long addr; void __iomem *remap_addr; @@ -268,8 +291,8 @@ struct snd_azx { spinlock_t reg_lock; struct semaphore open_mutex; - /* streams */ - azx_dev_t azx_dev[MAX_ICH6_DEV]; + /* streams (x num_streams) */ + azx_dev_t *azx_dev; /* PCM */ unsigned int pcm_devs; @@ -293,6 +316,23 @@ struct snd_azx { unsigned int initialized: 1; }; +/* driver types */ +enum { + AZX_DRIVER_ICH, + AZX_DRIVER_ATI, + AZX_DRIVER_VIA, + AZX_DRIVER_SIS, + AZX_DRIVER_ULI, +}; + +static char *driver_short_names[] __devinitdata = { + [AZX_DRIVER_ICH] = "HDA Intel", + [AZX_DRIVER_ATI] = "HDA ATI SB", + [AZX_DRIVER_VIA] = "HDA VIA VT82xx", + [AZX_DRIVER_SIS] = "HDA SIS966", + [AZX_DRIVER_ULI] = "HDA ULI M5461" +}; + /* * macros for easy use */ @@ -361,6 +401,8 @@ static void azx_init_cmd_io(azx_t *chip) azx_writel(chip, CORBLBASE, (u32)chip->corb.addr); azx_writel(chip, CORBUBASE, upper_32bit(chip->corb.addr)); + /* set the corb size to 256 entries (ULI requires explicitly) */ + azx_writeb(chip, CORBSIZE, 0x02); /* set the corb write pointer to 0 */ azx_writew(chip, CORBWP, 0); /* reset the corb hw read pointer */ @@ -374,6 +416,8 @@ static void azx_init_cmd_io(azx_t *chip) azx_writel(chip, RIRBLBASE, (u32)chip->rirb.addr); azx_writel(chip, RIRBUBASE, upper_32bit(chip->rirb.addr)); + /* set the rirb size to 256 entries (ULI requires explicitly) */ + azx_writeb(chip, RIRBSIZE, 0x02); /* reset the rirb hw write pointer */ azx_writew(chip, RIRBWP, ICH6_RBRWP_CLR); /* set N=1, get RIRB response interrupt for new entry */ @@ -597,7 +641,7 @@ static void azx_int_disable(azx_t *chip) int i; /* disable interrupts in stream descriptor */ - for (i = 0; i < MAX_ICH6_DEV; i++) { + for (i = 0; i < chip->num_streams; i++) { azx_dev_t *azx_dev = &chip->azx_dev[i]; azx_sd_writeb(azx_dev, SD_CTL, azx_sd_readb(azx_dev, SD_CTL) & ~SD_INT_MASK); @@ -617,7 +661,7 @@ static void azx_int_clear(azx_t *chip) int i; /* clear stream status */ - for (i = 0; i < MAX_ICH6_DEV; i++) { + for (i = 0; i < chip->num_streams; i++) { azx_dev_t *azx_dev = &chip->azx_dev[i]; azx_sd_writeb(azx_dev, SD_STS, SD_INT_MASK); } @@ -687,8 +731,7 @@ static void azx_init_chip(azx_t *chip) } /* For ATI SB450 azalia HD audio, we need to enable snoop */ - if (chip->pci->vendor == PCI_VENDOR_ID_ATI && - chip->pci->device == ATI_SB450_HDAUDIO_PCI_DEVICE_ID) { + if (chip->driver_type == AZX_DRIVER_ATI) { pci_read_config_byte(chip->pci, ATI_SB450_HDAUDIO_MISC_CNTR2_ADDR, &ati_misc_cntl2); pci_write_config_byte(chip->pci, ATI_SB450_HDAUDIO_MISC_CNTR2_ADDR, @@ -715,7 +758,7 @@ static irqreturn_t azx_interrupt(int irq, void* dev_id, struct pt_regs *regs) return IRQ_NONE; } - for (i = 0; i < MAX_ICH6_DEV; i++) { + for (i = 0; i < chip->num_streams; i++) { azx_dev = &chip->azx_dev[i]; if (status & azx_dev->sd_int_sta_mask) { azx_sd_writeb(azx_dev, SD_STS, SD_INT_MASK); @@ -880,9 +923,15 @@ static int __devinit azx_codec_create(azx_t *chip, const char *model) /* assign a stream for the PCM */ static inline azx_dev_t *azx_assign_device(azx_t *chip, int stream) { - int dev, i; - dev = stream == SNDRV_PCM_STREAM_PLAYBACK ? 4 : 0; - for (i = 0; i < 4; i++, dev++) + int dev, i, nums; + if (stream == SNDRV_PCM_STREAM_PLAYBACK) { + dev = chip->playback_index_offset; + nums = chip->playback_streams; + } else { + dev = chip->capture_index_offset; + nums = chip->capture_streams; + } + for (i = 0; i < nums; i++, dev++) if (! chip->azx_dev[dev].opened) { chip->azx_dev[dev].opened = 1; return &chip->azx_dev[dev]; @@ -1190,7 +1239,7 @@ static int __devinit azx_init_stream(azx_t *chip) /* initialize each stream (aka device) * assign the starting bdl address to each stream (device) and initialize */ - for (i = 0; i < MAX_ICH6_DEV; i++) { + for (i = 0; i < chip->num_streams; i++) { unsigned int off = sizeof(u32) * (i * AZX_MAX_FRAG * 4); azx_dev_t *azx_dev = &chip->azx_dev[i]; azx_dev->bdl = (u32 *)(chip->bdl.area + off); @@ -1249,7 +1298,7 @@ static int azx_free(azx_t *chip) if (chip->initialized) { int i; - for (i = 0; i < MAX_ICH6_DEV; i++) + for (i = 0; i < chip->num_streams; i++) azx_stream_stop(chip, &chip->azx_dev[i]); /* disable interrupts */ @@ -1265,10 +1314,10 @@ static int azx_free(azx_t *chip) /* wait a little for interrupts to finish */ msleep(1); - - iounmap(chip->remap_addr); } + if (chip->remap_addr) + iounmap(chip->remap_addr); if (chip->irq >= 0) free_irq(chip->irq, (void*)chip); @@ -1280,6 +1329,7 @@ static int azx_free(azx_t *chip) snd_dma_free_pages(&chip->posbuf); pci_release_regions(chip->pci); pci_disable_device(chip->pci); + kfree(chip->azx_dev); kfree(chip); return 0; @@ -1294,7 +1344,8 @@ static int azx_dev_free(snd_device_t *device) * constructor */ static int __devinit azx_create(snd_card_t *card, struct pci_dev *pci, - int posfix, azx_t **rchip) + int posfix, int driver_type, + azx_t **rchip) { azx_t *chip; int err = 0; @@ -1320,9 +1371,20 @@ static int __devinit azx_create(snd_card_t *card, struct pci_dev *pci, chip->card = card; chip->pci = pci; chip->irq = -1; + chip->driver_type = driver_type; chip->position_fix = posfix; +#if BITS_PER_LONG != 64 + /* Fix up base address on ULI M5461 */ + if (chip->driver_type == AZX_DRIVER_ULI) { + u16 tmp3; + pci_read_config_word(pci, 0x40, &tmp3); + pci_write_config_word(pci, 0x40, tmp3 | 0x10); + pci_write_config_dword(pci, PCI_BASE_ADDRESS_1, 0); + } +#endif + if ((err = pci_request_regions(pci, "ICH HD audio")) < 0) { kfree(chip); pci_disable_device(pci); @@ -1348,16 +1410,37 @@ static int __devinit azx_create(snd_card_t *card, struct pci_dev *pci, pci_set_master(pci); synchronize_irq(chip->irq); + switch (chip->driver_type) { + case AZX_DRIVER_ULI: + chip->playback_streams = ULI_NUM_PLAYBACK; + chip->capture_streams = ULI_NUM_CAPTURE; + chip->playback_index_offset = ULI_PLAYBACK_INDEX; + chip->capture_index_offset = ULI_CAPTURE_INDEX; + break; + default: + chip->playback_streams = ICH6_NUM_PLAYBACK; + chip->capture_streams = ICH6_NUM_CAPTURE; + chip->playback_index_offset = ICH6_PLAYBACK_INDEX; + chip->capture_index_offset = ICH6_CAPTURE_INDEX; + break; + } + chip->num_streams = chip->playback_streams + chip->capture_streams; + chip->azx_dev = kcalloc(chip->num_streams, sizeof(*chip->azx_dev), GFP_KERNEL); + if (! chip->azx_dev) { + snd_printk(KERN_ERR "cannot malloc azx_dev\n"); + goto errout; + } + /* allocate memory for the BDL for each stream */ if ((err = snd_dma_alloc_pages(SNDRV_DMA_TYPE_DEV, snd_dma_pci_data(chip->pci), - PAGE_SIZE, &chip->bdl)) < 0) { + BDL_SIZE, &chip->bdl)) < 0) { snd_printk(KERN_ERR SFX "cannot allocate BDL\n"); goto errout; } if (chip->position_fix == POS_FIX_POSBUF) { /* allocate memory for the position buffer */ if ((err = snd_dma_alloc_pages(SNDRV_DMA_TYPE_DEV, snd_dma_pci_data(chip->pci), - MAX_ICH6_DEV * 8, &chip->posbuf)) < 0) { + chip->num_streams * 8, &chip->posbuf)) < 0) { snd_printk(KERN_ERR SFX "cannot allocate posbuf\n"); goto errout; } @@ -1386,6 +1469,10 @@ static int __devinit azx_create(snd_card_t *card, struct pci_dev *pci, goto errout; } + strcpy(card->driver, "HDA-Intel"); + strcpy(card->shortname, driver_short_names[chip->driver_type]); + sprintf(card->longname, "%s at 0x%lx irq %i", card->shortname, chip->addr, chip->irq); + *rchip = chip; return 0; @@ -1414,15 +1501,12 @@ static int __devinit azx_probe(struct pci_dev *pci, const struct pci_device_id * return -ENOMEM; } - if ((err = azx_create(card, pci, position_fix[dev], &chip)) < 0) { + if ((err = azx_create(card, pci, position_fix[dev], pci_id->driver_data, + &chip)) < 0) { snd_card_free(card); return err; } - strcpy(card->driver, "HDA-Intel"); - strcpy(card->shortname, "HDA Intel"); - sprintf(card->longname, "%s at 0x%lx irq %i", card->shortname, chip->addr, chip->irq); - /* create codec instances */ if ((err = azx_codec_create(chip, model[dev])) < 0) { snd_card_free(card); @@ -1463,13 +1547,13 @@ static void __devexit azx_remove(struct pci_dev *pci) /* PCI IDs */ static struct pci_device_id azx_ids[] = { - { 0x8086, 0x2668, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0 }, /* ICH6 */ - { 0x8086, 0x27d8, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0 }, /* ICH7 */ - { 0x8086, 0x269a, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0 }, /* ESB2 */ - { 0x1002, 0x437b, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0 }, /* ATI SB450 */ - { 0x1106, 0x3288, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0 }, /* VIA VT8251/VT8237A */ - { 0x1039, 0x7502, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0 }, /* SIS966 */ - { 0x10b9, 0x5461, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0 }, /* ALI 5461? */ + { 0x8086, 0x2668, PCI_ANY_ID, PCI_ANY_ID, 0, 0, AZX_DRIVER_ICH }, /* ICH6 */ + { 0x8086, 0x27d8, PCI_ANY_ID, PCI_ANY_ID, 0, 0, AZX_DRIVER_ICH }, /* ICH7 */ + { 0x8086, 0x269a, PCI_ANY_ID, PCI_ANY_ID, 0, 0, AZX_DRIVER_ICH }, /* ESB2 */ + { 0x1002, 0x437b, PCI_ANY_ID, PCI_ANY_ID, 0, 0, AZX_DRIVER_ATI }, /* ATI SB450 */ + { 0x1106, 0x3288, PCI_ANY_ID, PCI_ANY_ID, 0, 0, AZX_DRIVER_VIA }, /* VIA VT8251/VT8237A */ + { 0x1039, 0x7502, PCI_ANY_ID, PCI_ANY_ID, 0, 0, AZX_DRIVER_SIS }, /* SIS966 */ + { 0x10b9, 0x5461, PCI_ANY_ID, PCI_ANY_ID, 0, 0, AZX_DRIVER_ULI }, /* ULI M5461 */ { 0, } }; MODULE_DEVICE_TABLE(pci, azx_ids); -- cgit v1.2.3 From f442e8b0eae4fbb6bbf9b8b005002b51a59e23bf Mon Sep 17 00:00:00 2001 From: Adrian Bunk Date: Wed, 24 Aug 2005 17:01:02 +0200 Subject: [ALSA] include/sound/gus.h: 'extern inline' -> 'static inline' GUS Library 'extern inline' doesn't make much sense. Signed-off-by: Adrian Bunk Signed-off-by: Takashi Iwai --- include/sound/gus.h | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/include/sound/gus.h b/include/sound/gus.h index b4b461ca173..7000d9d9199 100644 --- a/include/sound/gus.h +++ b/include/sound/gus.h @@ -512,13 +512,13 @@ extern void snd_gf1_ctrl_stop(snd_gus_card_t * gus, unsigned char reg); extern void snd_gf1_write8(snd_gus_card_t * gus, unsigned char reg, unsigned char data); extern unsigned char snd_gf1_look8(snd_gus_card_t * gus, unsigned char reg); -extern inline unsigned char snd_gf1_read8(snd_gus_card_t * gus, unsigned char reg) +static inline unsigned char snd_gf1_read8(snd_gus_card_t * gus, unsigned char reg) { return snd_gf1_look8(gus, reg | 0x80); } extern void snd_gf1_write16(snd_gus_card_t * gus, unsigned char reg, unsigned int data); extern unsigned short snd_gf1_look16(snd_gus_card_t * gus, unsigned char reg); -extern inline unsigned short snd_gf1_read16(snd_gus_card_t * gus, unsigned char reg) +static inline unsigned short snd_gf1_read16(snd_gus_card_t * gus, unsigned char reg) { return snd_gf1_look16(gus, reg | 0x80); } @@ -532,12 +532,12 @@ extern void snd_gf1_i_ctrl_stop(snd_gus_card_t * gus, unsigned char reg); extern void snd_gf1_i_write8(snd_gus_card_t * gus, unsigned char reg, unsigned char data); extern unsigned char snd_gf1_i_look8(snd_gus_card_t * gus, unsigned char reg); extern void snd_gf1_i_write16(snd_gus_card_t * gus, unsigned char reg, unsigned int data); -extern inline unsigned char snd_gf1_i_read8(snd_gus_card_t * gus, unsigned char reg) +static inline unsigned char snd_gf1_i_read8(snd_gus_card_t * gus, unsigned char reg) { return snd_gf1_i_look8(gus, reg | 0x80); } extern unsigned short snd_gf1_i_look16(snd_gus_card_t * gus, unsigned char reg); -extern inline unsigned short snd_gf1_i_read16(snd_gus_card_t * gus, unsigned char reg) +static inline unsigned short snd_gf1_i_read16(snd_gus_card_t * gus, unsigned char reg) { return snd_gf1_i_look16(gus, reg | 0x80); } -- cgit v1.2.3 From a278655ff5d0c9d5eb34cf99f3a4c20da09eb09e Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Wed, 24 Aug 2005 17:57:25 +0200 Subject: [ALSA] Fix missing spin_unlock au88x0 driver,Common EMU synth Fixed missing spin_unlock. Signed-off-by: Takashi Iwai --- sound/pci/au88x0/au88x0_pcm.c | 4 +++- sound/synth/emux/emux_synth.c | 1 - 2 files changed, 3 insertions(+), 2 deletions(-) diff --git a/sound/pci/au88x0/au88x0_pcm.c b/sound/pci/au88x0/au88x0_pcm.c index de95bd6d1ee..38bd2b5dd43 100644 --- a/sound/pci/au88x0/au88x0_pcm.c +++ b/sound/pci/au88x0/au88x0_pcm.c @@ -220,8 +220,10 @@ snd_vortex_pcm_hw_params(snd_pcm_substream_t * substream, vortex_adb_allocroute(chip, -1, params_channels(hw_params), substream->stream, type); - if (dma < 0) + if (dma < 0) { + spin_unlock_irq(&chip->lock); return dma; + } stream = substream->runtime->private_data = &chip->dma_adb[dma]; stream->substream = substream; /* Setup Buffers. */ diff --git a/sound/synth/emux/emux_synth.c b/sound/synth/emux/emux_synth.c index f13b038329e..751bf1272af 100644 --- a/sound/synth/emux/emux_synth.c +++ b/sound/synth/emux/emux_synth.c @@ -98,7 +98,6 @@ snd_emux_note_on(void *p, int note, int vel, snd_midi_channel_t *chan) vp = emu->ops.get_voice(emu, port); if (vp == NULL || vp->ch < 0) continue; - snd_assert(vp->emu != NULL && vp->hw != NULL, return); if (STATE_IS_PLAYING(vp->state)) emu->ops.terminate(vp); -- cgit v1.2.3 From c347e9fca710551f0def6a4d58505a6f4c0d87f6 Mon Sep 17 00:00:00 2001 From: Clemens Ladisch Date: Thu, 25 Aug 2005 11:10:05 +0200 Subject: [ALSA] usb-audio: fix Emagic MIDI protocol handling USB generic driver Emagic devices pad their packets not with 0xff bytes but with a 0xff byte followed by garbage, so we have to stop at the first such byte. Signed-off-by: Clemens Ladisch --- sound/usb/usbmidi.c | 17 ++++++++++++----- 1 file changed, 12 insertions(+), 5 deletions(-) diff --git a/sound/usb/usbmidi.c b/sound/usb/usbmidi.c index d0d895df537..5f19b494923 100644 --- a/sound/usb/usbmidi.c +++ b/sound/usb/usbmidi.c @@ -594,17 +594,20 @@ static void snd_usbmidi_emagic_finish_out(snd_usb_midi_out_endpoint_t* ep) static void snd_usbmidi_emagic_input(snd_usb_midi_in_endpoint_t* ep, uint8_t* buffer, int buffer_length) { - /* ignore padding bytes at end of buffer */ - while (buffer_length > 0 && buffer[buffer_length - 1] == 0xff) - --buffer_length; + int i; + + /* FF indicates end of valid data */ + for (i = 0; i < buffer_length; ++i) + if (buffer[i] == 0xff) { + buffer_length = i; + break; + } /* handle F5 at end of last buffer */ if (ep->seen_f5) goto switch_port; while (buffer_length > 0) { - int i; - /* determine size of data until next F5 */ for (i = 0; i < buffer_length; ++i) if (buffer[i] == 0xf5) @@ -671,6 +674,10 @@ static void snd_usbmidi_emagic_output(snd_usb_midi_out_endpoint_t* ep) break; } } + if (buf_free < ep->max_transfer && buf_free > 0) { + *buf = 0xff; + --buf_free; + } ep->urb->transfer_buffer_length = ep->max_transfer - buf_free; } -- cgit v1.2.3 From e0c93cf311b3eaa04bfb5769cff38861d4e748c8 Mon Sep 17 00:00:00 2001 From: Daniel Horchner Date: Thu, 25 Aug 2005 13:02:24 +0200 Subject: [ALSA] intel8x0 - add AC97_TUNE_MUTE_LED quirk for HP nx8220 laptop 103c:0934 Intel8x0 driver Signed-off-by: Jaroslav Kysela --- sound/pci/intel8x0.c | 6 ++++++ 1 file changed, 6 insertions(+) diff --git a/sound/pci/intel8x0.c b/sound/pci/intel8x0.c index e38984dc4d9..05c7994a8d5 100644 --- a/sound/pci/intel8x0.c +++ b/sound/pci/intel8x0.c @@ -1824,6 +1824,12 @@ static struct ac97_quirk ac97_quirks[] __devinitdata = { .name = "HP nc6000", .type = AC97_TUNE_MUTE_LED }, + { + .subvendor = 0x103c, + .subdevice = 0x0934, + .name = "HP nx8220", + .type = AC97_TUNE_MUTE_LED + }, { .subvendor = 0x103c, .subdevice = 0x099c, -- cgit v1.2.3 From 7153a558ad598ff521f1d9430982e2a4a6865126 Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Thu, 25 Aug 2005 19:51:47 +0200 Subject: [ALSA] pcm - Fix zero-division in 32bit compat layer PCM Midlevel Fixed zero-division bug in PCM 32bit compat layer. Signed-off-by: Takashi Iwai --- sound/core/pcm_compat.c | 11 ++++++++--- 1 file changed, 8 insertions(+), 3 deletions(-) diff --git a/sound/core/pcm_compat.c b/sound/core/pcm_compat.c index eef94a15f50..4b6307df846 100644 --- a/sound/core/pcm_compat.c +++ b/sound/core/pcm_compat.c @@ -144,7 +144,7 @@ static int snd_pcm_ioctl_sw_params_compat(snd_pcm_substream_t *substream, err = snd_pcm_sw_params(substream, ¶ms); if (err < 0) return err; - if (put_user(boundary, &src->boundary)) + if (boundary && put_user(boundary, &src->boundary)) return -EFAULT; return err; } @@ -252,8 +252,11 @@ static int snd_pcm_ioctl_hw_params_compat(snd_pcm_substream_t *substream, goto error; } - if (! refine) - runtime->boundary = recalculate_boundary(runtime); + if (! refine) { + unsigned int new_boundary = recalculate_boundary(runtime); + if (new_boundary) + runtime->boundary = new_boundary; + } error: kfree(data); return err; @@ -408,6 +411,8 @@ static int snd_pcm_ioctl_sync_ptr_compat(snd_pcm_substream_t *substream, status = runtime->status; control = runtime->control; boundary = recalculate_boundary(runtime); + if (! boundary) + boundary = 0x7fffffff; snd_pcm_stream_lock_irq(substream); /* FIXME: we should consider the boundary for the sync from app */ if (!(sflags & SNDRV_PCM_SYNC_PTR_APPL)) -- cgit v1.2.3 From 9970dce56686d7b71310388025d8925d3d29e6ec Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Thu, 25 Aug 2005 20:30:27 +0200 Subject: [ALSA] intel8x0 - Add quirk for FSC 4010 Intel8x0 driver Added ac97_quirk for FSC 4010. Signed-off-by: Takashi Iwai --- sound/pci/intel8x0.c | 6 ++++++ 1 file changed, 6 insertions(+) diff --git a/sound/pci/intel8x0.c b/sound/pci/intel8x0.c index 05c7994a8d5..7b548416dce 100644 --- a/sound/pci/intel8x0.c +++ b/sound/pci/intel8x0.c @@ -1890,6 +1890,12 @@ static struct ac97_quirk ac97_quirks[] __devinitdata = { .name = "Fujitsu S6210", /* STAC9750/51 */ .type = AC97_TUNE_HP_ONLY }, + { + .subvendor = 0x10cf, + .subdevice = 0x12ec, + .name = "Fujitsu-Siemens 4010", + .type = AC97_TUNE_HP_ONLY + }, { .subvendor = 0x10f1, .subdevice = 0x2665, -- cgit v1.2.3 From 6a293552ba0d104ef9d35b48972a01540fbd181b Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Fri, 26 Aug 2005 17:26:40 +0200 Subject: [ALSA] emu10k1 - Add missing ac97 support on SBLive! Player 5.1 EMU10K1/EMU10K2 driver Added the missing ac97 support on SBLive! Player 5.1. Signed-off-by: Takashi Iwai --- sound/pci/emu10k1/emu10k1_main.c | 1 + 1 file changed, 1 insertion(+) diff --git a/sound/pci/emu10k1/emu10k1_main.c b/sound/pci/emu10k1/emu10k1_main.c index c0b67b70e34..83597c69459 100644 --- a/sound/pci/emu10k1/emu10k1_main.c +++ b/sound/pci/emu10k1/emu10k1_main.c @@ -752,6 +752,7 @@ static emu_chip_details_t emu_chip_details[] = { .driver = "EMU10K1", .name = "SBLive! Player 5.1 [SB0060]", .id = "Live", .emu10k1_chip = 1, + .ac97_chip = 1, .sblive51 = 1} , {.vendor = 0x1102, .device = 0x0002, .subsystem = 0x80511102, .driver = "EMU10K1", .name = "SBLive! Value [CT4850]", -- cgit v1.2.3 From c6c0b841dd85c878fe9794862b10ce8eb4e90761 Mon Sep 17 00:00:00 2001 From: Lee Revell Date: Mon, 29 Aug 2005 17:42:00 +0200 Subject: [ALSA] Add identification for Live 5.1 [SB0220] EMU10K1/EMU10K2 driver Add identification for Live 5.1 [SB0220] Signed-off-by: Lee Revell Signed-off-by: Takashi Iwai --- sound/pci/emu10k1/emu10k1_main.c | 7 +++++++ 1 file changed, 7 insertions(+) diff --git a/sound/pci/emu10k1/emu10k1_main.c b/sound/pci/emu10k1/emu10k1_main.c index 83597c69459..e69d5b739e8 100644 --- a/sound/pci/emu10k1/emu10k1_main.c +++ b/sound/pci/emu10k1/emu10k1_main.c @@ -741,6 +741,13 @@ static emu_chip_details_t emu_chip_details[] = { .emu10k1_chip = 1, .ac97_chip = 1, .sblive51 = 1} , + /* Tested by Thomas Zehetbauer 27th Aug 2005 */ + {.vendor = 0x1102, .device = 0x0002, .subsystem = 0x80651102, + .driver = "EMU10K1", .name = "SB Live 5.1 [SB0220]", + .id = "Live", + .emu10k1_chip = 1, + .ac97_chip = 1, + .sblive51 = 1} , {.vendor = 0x1102, .device = 0x0002, .subsystem = 0x80641102, .driver = "EMU10K1", .name = "SB Live 5.1", .id = "Live", -- cgit v1.2.3 From 68c339d9068502347015ce462530ec54c4d841e4 Mon Sep 17 00:00:00 2001 From: Jaroslav Kysela Date: Tue, 30 Aug 2005 08:48:35 +0200 Subject: [ALSA] version 1.0.10rc1 --- include/sound/version.h | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/include/sound/version.h b/include/sound/version.h index c085136f391..8d19bfabb7e 100644 --- a/include/sound/version.h +++ b/include/sound/version.h @@ -1,3 +1,3 @@ /* include/version.h. Generated by configure. */ -#define CONFIG_SND_VERSION "1.0.9b" -#define CONFIG_SND_DATE " (Thu Jul 28 12:20:13 2005 UTC)" +#define CONFIG_SND_VERSION "1.0.10rc1" +#define CONFIG_SND_DATE " (Tue Aug 30 05:31:08 2005 UTC)" -- cgit v1.2.3 From d568121ce3151c36cc4718dd4e977f217c6144c2 Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Tue, 30 Aug 2005 08:58:37 +0200 Subject: [PATCH] Assign device pointer to OSS devices Add register_sound_special_device() function to allow assignment of device pointer to a specific OSS device for HAL. Signed-off-by: Takashi Iwai --- include/linux/sound.h | 2 ++ sound/core/sound_oss.c | 7 +++++-- sound/sound_core.c | 27 ++++++++++++++++++--------- 3 files changed, 25 insertions(+), 11 deletions(-) diff --git a/include/linux/sound.h b/include/linux/sound.h index 428f59794f4..72b9af4c3fd 100644 --- a/include/linux/sound.h +++ b/include/linux/sound.h @@ -29,7 +29,9 @@ * Sound core interface functions */ +struct device; extern int register_sound_special(struct file_operations *fops, int unit); +extern int register_sound_special_device(struct file_operations *fops, int unit, struct device *dev); extern int register_sound_mixer(struct file_operations *fops, int dev); extern int register_sound_midi(struct file_operations *fops, int dev); extern int register_sound_dsp(struct file_operations *fops, int dev); diff --git a/sound/core/sound_oss.c b/sound/core/sound_oss.c index de39d212bc1..e401c670329 100644 --- a/sound/core/sound_oss.c +++ b/sound/core/sound_oss.c @@ -98,6 +98,7 @@ int snd_register_oss_device(int type, snd_card_t * card, int dev, snd_minor_t * int cidx = SNDRV_MINOR_OSS_CARD(minor); int track2 = -1; int register1 = -1, register2 = -1; + struct device *carddev = NULL; if (minor < 0) return minor; @@ -121,11 +122,13 @@ int snd_register_oss_device(int type, snd_card_t * card, int dev, snd_minor_t * track2 = SNDRV_MINOR_OSS(cidx, SNDRV_MINOR_OSS_DMMIDI1); break; } - register1 = register_sound_special(reg->f_ops, minor); + if (card) + carddev = card->dev; + register1 = register_sound_special_device(reg->f_ops, minor, carddev); if (register1 != minor) goto __end; if (track2 >= 0) { - register2 = register_sound_special(reg->f_ops, track2); + register2 = register_sound_special_device(reg->f_ops, track2, carddev); if (register2 != track2) goto __end; } diff --git a/sound/sound_core.c b/sound/sound_core.c index 21a69e09622..954f994592a 100644 --- a/sound/sound_core.c +++ b/sound/sound_core.c @@ -153,7 +153,7 @@ static DEFINE_SPINLOCK(sound_loader_lock); * list. Acquires locks as needed */ -static int sound_insert_unit(struct sound_unit **list, struct file_operations *fops, int index, int low, int top, const char *name, umode_t mode) +static int sound_insert_unit(struct sound_unit **list, struct file_operations *fops, int index, int low, int top, const char *name, umode_t mode, struct device *dev) { struct sound_unit *s = kmalloc(sizeof(*s), GFP_KERNEL); int r; @@ -175,7 +175,7 @@ static int sound_insert_unit(struct sound_unit **list, struct file_operations *f devfs_mk_cdev(MKDEV(SOUND_MAJOR, s->unit_minor), S_IFCHR | mode, s->name); class_device_create(sound_class, MKDEV(SOUND_MAJOR, s->unit_minor), - NULL, s->name+6); + dev, s->name+6); return r; fail: @@ -227,16 +227,18 @@ static void sound_remove_unit(struct sound_unit **list, int unit) static struct sound_unit *chains[SOUND_STEP]; /** - * register_sound_special - register a special sound node + * register_sound_special_device - register a special sound node * @fops: File operations for the driver * @unit: Unit number to allocate + * @dev: device pointer * * Allocate a special sound device by minor number from the sound * subsystem. The allocated number is returned on succes. On failure * a negative error code is returned. */ -int register_sound_special(struct file_operations *fops, int unit) +int register_sound_special_device(struct file_operations *fops, int unit, + struct device *dev) { const int chain = unit % SOUND_STEP; int max_unit = 128 + chain; @@ -294,9 +296,16 @@ int register_sound_special(struct file_operations *fops, int unit) break; } return sound_insert_unit(&chains[chain], fops, -1, unit, max_unit, - name, S_IRUSR | S_IWUSR); + name, S_IRUSR | S_IWUSR, dev); } +EXPORT_SYMBOL(register_sound_special_device); + +int register_sound_special(struct file_operations *fops, int unit) +{ + return register_sound_special_device(fops, unit, NULL); +} + EXPORT_SYMBOL(register_sound_special); /** @@ -312,7 +321,7 @@ EXPORT_SYMBOL(register_sound_special); int register_sound_mixer(struct file_operations *fops, int dev) { return sound_insert_unit(&chains[0], fops, dev, 0, 128, - "mixer", S_IRUSR | S_IWUSR); + "mixer", S_IRUSR | S_IWUSR, NULL); } EXPORT_SYMBOL(register_sound_mixer); @@ -330,7 +339,7 @@ EXPORT_SYMBOL(register_sound_mixer); int register_sound_midi(struct file_operations *fops, int dev) { return sound_insert_unit(&chains[2], fops, dev, 2, 130, - "midi", S_IRUSR | S_IWUSR); + "midi", S_IRUSR | S_IWUSR, NULL); } EXPORT_SYMBOL(register_sound_midi); @@ -356,7 +365,7 @@ EXPORT_SYMBOL(register_sound_midi); int register_sound_dsp(struct file_operations *fops, int dev) { return sound_insert_unit(&chains[3], fops, dev, 3, 131, - "dsp", S_IWUSR | S_IRUSR); + "dsp", S_IWUSR | S_IRUSR, NULL); } EXPORT_SYMBOL(register_sound_dsp); @@ -375,7 +384,7 @@ EXPORT_SYMBOL(register_sound_dsp); int register_sound_synth(struct file_operations *fops, int dev) { return sound_insert_unit(&chains[9], fops, dev, 9, 137, - "synth", S_IRUSR | S_IWUSR); + "synth", S_IRUSR | S_IWUSR, NULL); } EXPORT_SYMBOL(register_sound_synth); -- cgit v1.2.3 From c88469704d63787e8d44ca5ea1c1bd0adc29572d Mon Sep 17 00:00:00 2001 From: Clemens Ladisch Date: Tue, 2 Aug 2005 15:26:52 +0200 Subject: [ALSA] usb-audio: throttle MIDI URB resubmits on USB errors USB generic driver When a USB error occurs that might indicate that the device has been unplugged, don't resubmit the URB immediately to prevent flooding the log with error messages before khubd has us disconnect()ed. Signed-off-by: Clemens Ladisch --- sound/usb/usbmidi.c | 77 ++++++++++++++++++++++++++++++++++++++++++++--------- 1 file changed, 64 insertions(+), 13 deletions(-) diff --git a/sound/usb/usbmidi.c b/sound/usb/usbmidi.c index 5f19b494923..93dedde3c42 100644 --- a/sound/usb/usbmidi.c +++ b/sound/usb/usbmidi.c @@ -44,6 +44,7 @@ #include #include #include +#include #include #include #include @@ -56,6 +57,12 @@ */ /* #define DUMP_PACKETS */ +/* + * how long to wait after some USB errors, so that khubd can disconnect() us + * without too many spurious errors + */ +#define ERROR_DELAY_JIFFIES (HZ / 10) + MODULE_AUTHOR("Clemens Ladisch "); MODULE_DESCRIPTION("USB Audio/MIDI helper module"); @@ -100,6 +107,7 @@ struct snd_usb_midi { snd_rawmidi_t* rmidi; struct usb_protocol_ops* usb_protocol_ops; struct list_head list; + struct timer_list error_timer; struct snd_usb_midi_endpoint { snd_usb_midi_out_endpoint_t *out; @@ -141,7 +149,8 @@ struct snd_usb_midi_in_endpoint { struct usbmidi_in_port { snd_rawmidi_substream_t* substream; } ports[0x10]; - int seen_f5; + u8 seen_f5; + u8 error_resubmit; int current_port; }; @@ -167,14 +176,22 @@ static int snd_usbmidi_submit_urb(struct urb* urb, int flags) */ static int snd_usbmidi_urb_error(int status) { - if (status == -ENOENT) - return status; /* killed */ - if (status == -EILSEQ || - status == -ECONNRESET || - status == -ETIMEDOUT) - return -ENODEV; /* device removed/shutdown */ - snd_printk(KERN_ERR "urb status %d\n", status); - return 0; /* continue */ + switch (status) { + /* manually unlinked, or device gone */ + case -ENOENT: + case -ECONNRESET: + case -ESHUTDOWN: + case -ENODEV: + return -ENODEV; + /* errors that might occur during unplugging */ + case -EPROTO: /* EHCI */ + case -ETIMEDOUT: /* OHCI */ + case -EILSEQ: /* UHCI */ + return -EIO; + default: + snd_printk(KERN_ERR "urb status %d\n", status); + return 0; /* continue */ + } } /* @@ -218,8 +235,15 @@ static void snd_usbmidi_in_urb_complete(struct urb* urb, struct pt_regs *regs) ep->umidi->usb_protocol_ops->input(ep, urb->transfer_buffer, urb->actual_length); } else { - if (snd_usbmidi_urb_error(urb->status) < 0) + int err = snd_usbmidi_urb_error(urb->status); + if (err < 0) { + if (err != -ENODEV) { + ep->error_resubmit = 1; + mod_timer(&ep->umidi->error_timer, + jiffies + ERROR_DELAY_JIFFIES); + } return; + } } if (usb_pipe_needs_resubmit(urb->pipe)) { @@ -236,8 +260,13 @@ static void snd_usbmidi_out_urb_complete(struct urb* urb, struct pt_regs *regs) ep->urb_active = 0; spin_unlock(&ep->buffer_lock); if (urb->status < 0) { - if (snd_usbmidi_urb_error(urb->status) < 0) + int err = snd_usbmidi_urb_error(urb->status); + if (err < 0) { + if (err != -ENODEV) + mod_timer(&ep->umidi->error_timer, + jiffies + ERROR_DELAY_JIFFIES); return; + } } snd_usbmidi_do_output(ep); } @@ -276,6 +305,24 @@ static void snd_usbmidi_out_tasklet(unsigned long data) snd_usbmidi_do_output(ep); } +/* called after transfers had been interrupted due to some USB error */ +static void snd_usbmidi_error_timer(unsigned long data) +{ + snd_usb_midi_t *umidi = (snd_usb_midi_t *)data; + int i; + + for (i = 0; i < MIDI_MAX_ENDPOINTS; ++i) { + snd_usb_midi_in_endpoint_t *in = umidi->endpoints[i].in; + if (in && in->error_resubmit) { + in->error_resubmit = 0; + in->urb->dev = umidi->chip->dev; + snd_usbmidi_submit_urb(in->urb, GFP_ATOMIC); + } + if (umidi->endpoints[i].out) + snd_usbmidi_do_output(umidi->endpoints[i].out); + } +} + /* helper function to send static data that may not DMA-able */ static int send_bulk_static_data(snd_usb_midi_out_endpoint_t* ep, const void *data, int len) @@ -844,8 +891,6 @@ static unsigned int snd_usbmidi_count_bits(unsigned int x) */ static void snd_usbmidi_out_endpoint_delete(snd_usb_midi_out_endpoint_t* ep) { - if (ep->tasklet.func) - tasklet_kill(&ep->tasklet); if (ep->urb) { usb_buffer_free(ep->umidi->chip->dev, ep->max_transfer, ep->urb->transfer_buffer, @@ -934,8 +979,11 @@ void snd_usbmidi_disconnect(struct list_head* p) int i; umidi = list_entry(p, snd_usb_midi_t, list); + del_timer_sync(&umidi->error_timer); for (i = 0; i < MIDI_MAX_ENDPOINTS; ++i) { snd_usb_midi_endpoint_t* ep = &umidi->endpoints[i]; + if (ep->out) + tasklet_kill(&ep->out->tasklet); if (ep->out && ep->out->urb) { usb_kill_urb(ep->out->urb); if (umidi->usb_protocol_ops->finish_out_endpoint) @@ -1496,6 +1544,9 @@ int snd_usb_create_midi_interface(snd_usb_audio_t* chip, umidi->iface = iface; umidi->quirk = quirk; umidi->usb_protocol_ops = &snd_usbmidi_standard_ops; + init_timer(&umidi->error_timer); + umidi->error_timer.function = snd_usbmidi_error_timer; + umidi->error_timer.data = (unsigned long)umidi; /* detect the endpoint(s) to use */ memset(endpoints, 0, sizeof(endpoints)); -- cgit v1.2.3 From 81d4af1340badcd2100c84fbd1bfd13156de41aa Mon Sep 17 00:00:00 2001 From: Ivan Kokshaysky Date: Tue, 30 Aug 2005 18:48:52 +0400 Subject: [PATCH] x86: pci_assign_unassigned_resources() update I had some time to think about PCI assign issues in 2.6.13-rc series. The major problem here is that we call pci_assign_unassigned_resources() way too early - at subsys_initcall level. Therefore we give no chances to ACPI and PnP routines (called at fs_initcall level) to reserve their respective resources properly, as the comments in drivers/pnp/system.c and drivers/acpi/motherboard.c suggest: /** * Reserve motherboard resources after PCI claim BARs, * but before PCI assign resources for uninitialized PCI devices */ So I moved the pci_assign_unassigned_resources() call to pcibios_assign_resources() (fs_initcall), which should hopefully fix a lot of problems and make PCIBIOS_MIN_IO tweaks unnecessary. Other changes: - remove resource assignment code from pcibios_assign_resources(), since it duplicates pci_assign_unassigned_resources() functionality and actually does nothing in 2.6.13; - modify ROM assignment code as per Ben's suggestion: try to use firmware settings by default (if PCI_ASSIGN_ROMS is not set); - set CARDBUS_IO_SIZE back to 4K as it's a wonderful stress test for various setups. Confirmed by Tero Roponen (who had problems with the 4kB CardBus IO size previously). Signed-off-by: Linus Torvalds --- arch/i386/pci/common.c | 1 - arch/i386/pci/i386.c | 49 ++++++++++++++++--------------------------------- drivers/pci/setup-bus.c | 2 +- 3 files changed, 17 insertions(+), 35 deletions(-) diff --git a/arch/i386/pci/common.c b/arch/i386/pci/common.c index ade5bc57c34..c96bea14b98 100644 --- a/arch/i386/pci/common.c +++ b/arch/i386/pci/common.c @@ -165,7 +165,6 @@ static int __init pcibios_init(void) if ((pci_probe & PCI_BIOS_SORT) && !(pci_probe & PCI_NO_SORT)) pcibios_sort(); #endif - pci_assign_unassigned_resources(); return 0; } diff --git a/arch/i386/pci/i386.c b/arch/i386/pci/i386.c index 93a364c8215..3cc480998a4 100644 --- a/arch/i386/pci/i386.c +++ b/arch/i386/pci/i386.c @@ -170,43 +170,26 @@ static void __init pcibios_allocate_resources(int pass) static int __init pcibios_assign_resources(void) { struct pci_dev *dev = NULL; - int idx; - struct resource *r; - - for_each_pci_dev(dev) { - int class = dev->class >> 8; - - /* Don't touch classless devices and host bridges */ - if (!class || class == PCI_CLASS_BRIDGE_HOST) - continue; - - for(idx=0; idx<6; idx++) { - r = &dev->resource[idx]; - - /* - * Don't touch IDE controllers and I/O ports of video cards! - */ - if ((class == PCI_CLASS_STORAGE_IDE && idx < 4) || - (class == PCI_CLASS_DISPLAY_VGA && (r->flags & IORESOURCE_IO))) - continue; - - /* - * We shall assign a new address to this resource, either because - * the BIOS forgot to do so or because we have decided the old - * address was unusable for some reason. - */ - if (!r->start && r->end) - pci_assign_resource(dev, idx); - } + struct resource *r, *pr; - if (pci_probe & PCI_ASSIGN_ROMS) { + if (!(pci_probe & PCI_ASSIGN_ROMS)) { + /* Try to use BIOS settings for ROMs, otherwise let + pci_assign_unassigned_resources() allocate the new + addresses. */ + for_each_pci_dev(dev) { r = &dev->resource[PCI_ROM_RESOURCE]; - r->end -= r->start; - r->start = 0; - if (r->end) - pci_assign_resource(dev, PCI_ROM_RESOURCE); + if (!r->flags || !r->start) + continue; + pr = pci_find_parent_resource(dev, r); + if (!pr || request_resource(pr, r) < 0) { + r->end -= r->start; + r->start = 0; + } } } + + pci_assign_unassigned_resources(); + return 0; } diff --git a/drivers/pci/setup-bus.c b/drivers/pci/setup-bus.c index 6d864c502a1..6b0e6464eb3 100644 --- a/drivers/pci/setup-bus.c +++ b/drivers/pci/setup-bus.c @@ -40,7 +40,7 @@ * FIXME: IO should be max 256 bytes. However, since we may * have a P2P bridge below a cardbus bridge, we need 4K. */ -#define CARDBUS_IO_SIZE (256) +#define CARDBUS_IO_SIZE (4*1024) #define CARDBUS_MEM_SIZE (32*1024*1024) static void __devinit -- cgit v1.2.3 From 62c592edead3c3a045662595f7ade3c12f133373 Mon Sep 17 00:00:00 2001 From: Marcelo Tosatti Date: Tue, 30 Aug 2005 13:40:22 -0300 Subject: [PATCH] ppc32 8xx: fix warnings in m8xx_setup.c The following patch fixes two warnings in arch/ppc/syslib/m8xx_setup.c Signed-off-by: Marcelo Tosatti Signed-off-by: Linus Torvalds --- arch/ppc/syslib/m8xx_setup.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/arch/ppc/syslib/m8xx_setup.c b/arch/ppc/syslib/m8xx_setup.c index a3702cfe8f7..4c888da89b3 100644 --- a/arch/ppc/syslib/m8xx_setup.c +++ b/arch/ppc/syslib/m8xx_setup.c @@ -57,7 +57,7 @@ unsigned char __res[sizeof(bd_t)]; extern void m8xx_ide_init(void); extern unsigned long find_available_memory(void); -extern void m8xx_cpm_reset(); +extern void m8xx_cpm_reset(void); extern void m8xx_wdt_handler_install(bd_t *bp); extern void rpxfb_alloc_pages(void); extern void cpm_interrupt_init(void); @@ -266,8 +266,8 @@ m8xx_show_percpuinfo(struct seq_file *m, int i) bp = (bd_t *)__res; - seq_printf(m, "clock\t\t: %ldMHz\n" - "bus clock\t: %ldMHz\n", + seq_printf(m, "clock\t\t: %uMHz\n" + "bus clock\t: %uMHz\n", bp->bi_intfreq / 1000000, bp->bi_busfreq / 1000000); -- cgit v1.2.3