From 8c273033906f8e85d54cb6ae052050f109440171 Mon Sep 17 00:00:00 2001 From: David Brownell Date: Wed, 1 Aug 2007 12:45:36 -0700 Subject: USB: px2xx_udc bugfix, missing check for gpio_pullup git commit b2bbb20b37d734443d1c279d0033a64f6095db54 added direct support for PXA GPIO D+ pullup as alternative to the older udc_command ops method. This was done by introduction of the pxa2xx_udc_mach_info member "gpio_pullup" which, if initialized, is now used in (almost) all places where udc_command used to be called. This patch fixes two places where checks for availability of D+ pullup control still only honor udc_command. Signed-off-by: Uli Luckas Signed-off-by: David Brownell Signed-off-by: Greg Kroah-Hartman --- drivers/usb/gadget/pxa2xx_udc.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/usb/gadget/pxa2xx_udc.c b/drivers/usb/gadget/pxa2xx_udc.c index 72b4ebbf132..1407ad1c812 100644 --- a/drivers/usb/gadget/pxa2xx_udc.c +++ b/drivers/usb/gadget/pxa2xx_udc.c @@ -967,7 +967,7 @@ static int pxa2xx_udc_pullup(struct usb_gadget *_gadget, int is_active) udc = container_of(_gadget, struct pxa2xx_udc, gadget); /* not all boards support pullup control */ - if (!udc->mach->udc_command) + if (!udc->mach->gpio_pullup && !udc->mach->udc_command) return -EOPNOTSUPP; is_active = (is_active != 0); @@ -2309,7 +2309,7 @@ static int pxa2xx_udc_suspend(struct platform_device *dev, pm_message_t state) { struct pxa2xx_udc *udc = platform_get_drvdata(dev); - if (!udc->mach->udc_command) + if (!udc->mach->gpio_pullup && !udc->mach->udc_command) WARN("USB host won't detect disconnect!\n"); pullup(udc, 0); -- cgit v1.2.3 From 74da5d68a54d66667664fbe233ededab2376a070 Mon Sep 17 00:00:00 2001 From: Alan Stern Date: Thu, 2 Aug 2007 13:29:10 -0400 Subject: USB: cdc-acm: fix sysfs attribute registration bug This patch (as950) fixes a bug in the cdc-acm driver. It doesn't keep track of which interface (control or data) the sysfs attributes get registered for, and as a result, during disconnect it will sometimes attempt to remove the attributes from the wrong interface. The left-over attributes can cause a crash later on, particularly if the driver module has been unloaded. Signed-off-by: Alan Stern Acked-by: Oliver Neukum Cc: stable Signed-off-by: Greg Kroah-Hartman --- drivers/usb/class/cdc-acm.c | 12 +++++++++--- 1 file changed, 9 insertions(+), 3 deletions(-) diff --git a/drivers/usb/class/cdc-acm.c b/drivers/usb/class/cdc-acm.c index fe940e0536e..f51e22490ed 100644 --- a/drivers/usb/class/cdc-acm.c +++ b/drivers/usb/class/cdc-acm.c @@ -921,6 +921,10 @@ skip_normal_probe: return -EINVAL; } } + + /* Accept probe requests only for the control interface */ + if (intf != control_interface) + return -ENODEV; if (usb_interface_claimed(data_interface)) { /* valid in this context */ dev_dbg(&intf->dev,"The data interface isn't available"); @@ -1109,10 +1113,12 @@ static void acm_disconnect(struct usb_interface *intf) return; } if (acm->country_codes){ - device_remove_file(&intf->dev, &dev_attr_wCountryCodes); - device_remove_file(&intf->dev, &dev_attr_iCountryCodeRelDate); + device_remove_file(&acm->control->dev, + &dev_attr_wCountryCodes); + device_remove_file(&acm->control->dev, + &dev_attr_iCountryCodeRelDate); } - device_remove_file(&intf->dev, &dev_attr_bmCapabilities); + device_remove_file(&acm->control->dev, &dev_attr_bmCapabilities); acm->dev = NULL; usb_set_intfdata(acm->control, NULL); usb_set_intfdata(acm->data, NULL); -- cgit v1.2.3 From c8ba84a0c682068a55a5892d6e12e3f196fd792c Mon Sep 17 00:00:00 2001 From: Maximilian Attems Date: Sat, 4 Aug 2007 10:19:41 +0200 Subject: USB: visor add ACER S10 palm device id modprobe visor vendor=0x502 product=0x1 is said to work, plus there are patch instructions for it. fixes http://bugs.debian.org/340547 see http://www.chinaitpower.com/A/2004-07-28/87909.html Signed-off-by: Maximilian Attems Signed-off-by: Greg Kroah-Hartman --- drivers/usb/serial/visor.c | 2 ++ drivers/usb/serial/visor.h | 3 +++ 2 files changed, 5 insertions(+) diff --git a/drivers/usb/serial/visor.c b/drivers/usb/serial/visor.c index 7d84a7647e8..30e08c0bcdc 100644 --- a/drivers/usb/serial/visor.c +++ b/drivers/usb/serial/visor.c @@ -104,6 +104,8 @@ static struct usb_device_id id_table [] = { .driver_info = (kernel_ulong_t)&palm_os_4_probe }, { USB_DEVICE(SONY_VENDOR_ID, SONY_CLIE_TJ25_ID), .driver_info = (kernel_ulong_t)&palm_os_4_probe }, + { USB_DEVICE(ACER_VENDOR_ID, ACER_S10_ID), + .driver_info = (kernel_ulong_t)&palm_os_4_probe }, { USB_DEVICE(SAMSUNG_VENDOR_ID, SAMSUNG_SCH_I330_ID), .driver_info = (kernel_ulong_t)&palm_os_4_probe }, { USB_DEVICE(SAMSUNG_VENDOR_ID, SAMSUNG_SPH_I500_ID), diff --git a/drivers/usb/serial/visor.h b/drivers/usb/serial/visor.h index 4ce6f62a6f3..57229cf6647 100644 --- a/drivers/usb/serial/visor.h +++ b/drivers/usb/serial/visor.h @@ -48,6 +48,9 @@ #define SONY_CLIE_UX50_ID 0x0144 #define SONY_CLIE_TJ25_ID 0x0169 +#define ACER_VENDOR_ID 0x0502 +#define ACER_S10_ID 0x0001 + #define SAMSUNG_VENDOR_ID 0x04E8 #define SAMSUNG_SCH_I330_ID 0x8001 #define SAMSUNG_SPH_I500_ID 0x6601 -- cgit v1.2.3 From 468d13623b6c8d048abab71ed465fa8ad3bf8875 Mon Sep 17 00:00:00 2001 From: Hermann Kneissel Date: Fri, 3 Aug 2007 20:20:33 +0200 Subject: USB: serial: garmin_gps: fixes package loss if used from gpsbabel This patch contains two fixes submitted by Ondrej Palkovsky: - the 'ACK' packet is sent after the transfer of the USB packet is completed, i.e. in the write_callback function. Because the close function sends the 'abort' command, a parameter is added that allows the caller of garmin_write_bulk to specify, if the 'ack' should be propagated to the serial link or dimissed. This fixes the problem with gpsbabel, it has sent several packets that were acknowledged before they were sent to the GPS and GpsBabel closed the device - thus effectively cancelled all outstanding requests in the queue. - removed the APP_RESP_SEEN and APP_REQ_SEEN flags and changed them into counters. It evades USB reset of the gps on every device close. Signed-off-by: Hermann Kneissel Signed-off-by: Greg Kroah-Hartman --- drivers/usb/serial/garmin_gps.c | 93 +++++++++++++++++++++-------------------- 1 file changed, 47 insertions(+), 46 deletions(-) diff --git a/drivers/usb/serial/garmin_gps.c b/drivers/usb/serial/garmin_gps.c index 04bd3b7a298..f1c90cfe725 100644 --- a/drivers/usb/serial/garmin_gps.c +++ b/drivers/usb/serial/garmin_gps.c @@ -1,7 +1,7 @@ /* * Garmin GPS driver * - * Copyright (C) 2006 Hermann Kneissel herkne@users.sourceforge.net + * Copyright (C) 2006,2007 Hermann Kneissel herkne@users.sourceforge.net * * The latest version of the driver can be found at * http://sourceforge.net/projects/garmin-gps/ @@ -34,6 +34,7 @@ #include #include #include +#include #include #include @@ -52,7 +53,7 @@ static int debug = 0; */ #define VERSION_MAJOR 0 -#define VERSION_MINOR 28 +#define VERSION_MINOR 31 #define _STR(s) #s #define _DRIVER_VERSION(a,b) "v" _STR(a) "." _STR(b) @@ -141,6 +142,8 @@ struct garmin_data { __u8 inbuffer [GPS_IN_BUFSIZ]; /* tty -> usb */ __u8 outbuffer[GPS_OUT_BUFSIZ]; /* usb -> tty */ __u8 privpkt[4*6]; + atomic_t req_count; + atomic_t resp_count; spinlock_t lock; struct list_head pktlist; }; @@ -171,8 +174,6 @@ struct garmin_data { #define CLEAR_HALT_REQUIRED 0x0001 #define FLAGS_QUEUING 0x0100 -#define FLAGS_APP_RESP_SEEN 0x0200 -#define FLAGS_APP_REQ_SEEN 0x0400 #define FLAGS_DROP_DATA 0x0800 #define FLAGS_GSP_SKIP 0x1000 @@ -186,7 +187,8 @@ struct garmin_data { /* function prototypes */ static void gsp_next_packet(struct garmin_data * garmin_data_p); static int garmin_write_bulk(struct usb_serial_port *port, - const unsigned char *buf, int count); + const unsigned char *buf, int count, + int dismiss_ack); /* some special packets to be send or received */ static unsigned char const GARMIN_START_SESSION_REQ[] @@ -233,9 +235,7 @@ static struct usb_driver garmin_driver = { static inline int noResponseFromAppLayer(struct garmin_data * garmin_data_p) { - return ((garmin_data_p->flags - & (FLAGS_APP_REQ_SEEN|FLAGS_APP_RESP_SEEN)) - == FLAGS_APP_REQ_SEEN); + return atomic_read(&garmin_data_p->req_count) == atomic_read(&garmin_data_p->resp_count); } @@ -463,7 +463,7 @@ static int gsp_rec_packet(struct garmin_data * garmin_data_p, int count) usbdata[2] = __cpu_to_le32(size); garmin_write_bulk (garmin_data_p->port, garmin_data_p->inbuffer, - GARMIN_PKTHDR_LENGTH+size); + GARMIN_PKTHDR_LENGTH+size, 0); /* if this was an abort-transfer command, flush all queued data. */ @@ -818,7 +818,7 @@ static int nat_receive(struct garmin_data * garmin_data_p, if (garmin_data_p->insize >= len) { garmin_write_bulk (garmin_data_p->port, garmin_data_p->inbuffer, - len); + len, 0); garmin_data_p->insize = 0; /* if this was an abort-transfer command, @@ -893,10 +893,11 @@ static int garmin_clear(struct garmin_data * garmin_data_p) struct usb_serial_port *port = garmin_data_p->port; - if (port != NULL && garmin_data_p->flags & FLAGS_APP_RESP_SEEN) { + if (port != NULL && atomic_read(&garmin_data_p->resp_count)) { /* send a terminate command */ status = garmin_write_bulk(port, GARMIN_STOP_TRANSFER_REQ, - sizeof(GARMIN_STOP_TRANSFER_REQ)); + sizeof(GARMIN_STOP_TRANSFER_REQ), + 1); } /* flush all queued data */ @@ -939,7 +940,8 @@ static int garmin_init_session(struct usb_serial_port *port) dbg("%s - starting session ...", __FUNCTION__); garmin_data_p->state = STATE_ACTIVE; status = garmin_write_bulk(port, GARMIN_START_SESSION_REQ, - sizeof(GARMIN_START_SESSION_REQ)); + sizeof(GARMIN_START_SESSION_REQ), + 0); if (status >= 0) { @@ -950,7 +952,8 @@ static int garmin_init_session(struct usb_serial_port *port) /* not needed, but the win32 driver does it too ... */ status = garmin_write_bulk(port, GARMIN_START_SESSION_REQ2, - sizeof(GARMIN_START_SESSION_REQ2)); + sizeof(GARMIN_START_SESSION_REQ2), + 0); if (status >= 0) { status = 0; spin_lock_irqsave(&garmin_data_p->lock, flags); @@ -987,6 +990,8 @@ static int garmin_open (struct usb_serial_port *port, struct file *filp) garmin_data_p->mode = initial_mode; garmin_data_p->count = 0; garmin_data_p->flags = 0; + atomic_set(&garmin_data_p->req_count, 0); + atomic_set(&garmin_data_p->resp_count, 0); spin_unlock_irqrestore(&garmin_data_p->lock, flags); /* shutdown any bulk reads that might be going on */ @@ -1035,28 +1040,39 @@ static void garmin_write_bulk_callback (struct urb *urb) { unsigned long flags; struct usb_serial_port *port = (struct usb_serial_port *)urb->context; - struct garmin_data * garmin_data_p = usb_get_serial_port_data(port); int status = urb->status; - /* free up the transfer buffer, as usb_free_urb() does not do this */ - kfree (urb->transfer_buffer); + if (port) { + struct garmin_data * garmin_data_p = usb_get_serial_port_data(port); - dbg("%s - port %d", __FUNCTION__, port->number); + dbg("%s - port %d", __FUNCTION__, port->number); - if (status) { - dbg("%s - nonzero write bulk status received: %d", - __FUNCTION__, status); - spin_lock_irqsave(&garmin_data_p->lock, flags); - garmin_data_p->flags |= CLEAR_HALT_REQUIRED; - spin_unlock_irqrestore(&garmin_data_p->lock, flags); + if (GARMIN_LAYERID_APPL == getLayerId(urb->transfer_buffer) + && (garmin_data_p->mode == MODE_GARMIN_SERIAL)) { + gsp_send_ack(garmin_data_p, ((__u8 *)urb->transfer_buffer)[4]); + } + + if (status) { + dbg("%s - nonzero write bulk status received: %d", + __FUNCTION__, urb->status); + spin_lock_irqsave(&garmin_data_p->lock, flags); + garmin_data_p->flags |= CLEAR_HALT_REQUIRED; + spin_unlock_irqrestore(&garmin_data_p->lock, flags); + } + + usb_serial_port_softint(port); } - usb_serial_port_softint(port); + /* Ignore errors that resulted from garmin_write_bulk with dismiss_ack=1 */ + + /* free up the transfer buffer, as usb_free_urb() does not do this */ + kfree (urb->transfer_buffer); } static int garmin_write_bulk (struct usb_serial_port *port, - const unsigned char *buf, int count) + const unsigned char *buf, int count, + int dismiss_ack) { unsigned long flags; struct usb_serial *serial = port->serial; @@ -1093,13 +1109,12 @@ static int garmin_write_bulk (struct usb_serial_port *port, usb_sndbulkpipe (serial->dev, port->bulk_out_endpointAddress), buffer, count, - garmin_write_bulk_callback, port); + garmin_write_bulk_callback, + dismiss_ack ? NULL : port); urb->transfer_flags |= URB_ZERO_PACKET; if (GARMIN_LAYERID_APPL == getLayerId(buffer)) { - spin_lock_irqsave(&garmin_data_p->lock, flags); - garmin_data_p->flags |= FLAGS_APP_REQ_SEEN; - spin_unlock_irqrestore(&garmin_data_p->lock, flags); + atomic_inc(&garmin_data_p->req_count); if (garmin_data_p->mode == MODE_GARMIN_SERIAL) { pkt_clear(garmin_data_p); garmin_data_p->state = STATE_GSP_WAIT_DATA; @@ -1114,13 +1129,6 @@ static int garmin_write_bulk (struct usb_serial_port *port, "failed with status = %d\n", __FUNCTION__, status); count = status; - } else { - - if (GARMIN_LAYERID_APPL == getLayerId(buffer) - && (garmin_data_p->mode == MODE_GARMIN_SERIAL)) { - - gsp_send_ack(garmin_data_p, buffer[4]); - } } /* we are done with this urb, so let the host driver @@ -1135,7 +1143,6 @@ static int garmin_write_bulk (struct usb_serial_port *port, static int garmin_write (struct usb_serial_port *port, const unsigned char *buf, int count) { - unsigned long flags; int pktid, pktsiz, len; struct garmin_data * garmin_data_p = usb_get_serial_port_data(port); __le32 *privpkt = (__le32 *)garmin_data_p->privpkt; @@ -1186,9 +1193,7 @@ static int garmin_write (struct usb_serial_port *port, break; case PRIV_PKTID_RESET_REQ: - spin_lock_irqsave(&garmin_data_p->lock, flags); - garmin_data_p->flags |= FLAGS_APP_REQ_SEEN; - spin_unlock_irqrestore(&garmin_data_p->lock, flags); + atomic_inc(&garmin_data_p->req_count); break; case PRIV_PKTID_SET_DEF_MODE: @@ -1241,8 +1246,6 @@ static int garmin_chars_in_buffer (struct usb_serial_port *port) static void garmin_read_process(struct garmin_data * garmin_data_p, unsigned char *data, unsigned data_length) { - unsigned long flags; - if (garmin_data_p->flags & FLAGS_DROP_DATA) { /* abort-transfer cmd is actice */ dbg("%s - pkt dropped", __FUNCTION__); @@ -1254,9 +1257,7 @@ static void garmin_read_process(struct garmin_data * garmin_data_p, the device */ if (0 == memcmp(data, GARMIN_APP_LAYER_REPLY, sizeof(GARMIN_APP_LAYER_REPLY))) { - spin_lock_irqsave(&garmin_data_p->lock, flags); - garmin_data_p->flags |= FLAGS_APP_RESP_SEEN; - spin_unlock_irqrestore(&garmin_data_p->lock, flags); + atomic_inc(&garmin_data_p->resp_count); } /* if throttling is active or postprecessing is required -- cgit v1.2.3 From 88e45dbbababd29cd6c80a3e0b60a828676b3ba9 Mon Sep 17 00:00:00 2001 From: Luis Lloret Date: Thu, 26 Jul 2007 10:08:47 -0400 Subject: USB: Stall control endpoint when file storage class request wValue != 0 This patch makes the File Storage Gadget stall the control endpoint when a MSC class request is made with wValue != 0. This change makes some MSC compliance test warnings disappear. Signed-off-by: Luis Lloret Signed-off-by: Alan Stern Signed-off-by: Greg Kroah-Hartman --- drivers/usb/gadget/file_storage.c | 7 ++++--- 1 file changed, 4 insertions(+), 3 deletions(-) diff --git a/drivers/usb/gadget/file_storage.c b/drivers/usb/gadget/file_storage.c index be7a1bd2823..01ddb6d3e51 100644 --- a/drivers/usb/gadget/file_storage.c +++ b/drivers/usb/gadget/file_storage.c @@ -1295,6 +1295,7 @@ static int class_setup_req(struct fsg_dev *fsg, struct usb_request *req = fsg->ep0req; int value = -EOPNOTSUPP; u16 w_index = le16_to_cpu(ctrl->wIndex); + u16 w_value = le16_to_cpu(ctrl->wValue); u16 w_length = le16_to_cpu(ctrl->wLength); if (!fsg->config) @@ -1308,7 +1309,7 @@ static int class_setup_req(struct fsg_dev *fsg, if (ctrl->bRequestType != (USB_DIR_OUT | USB_TYPE_CLASS | USB_RECIP_INTERFACE)) break; - if (w_index != 0) { + if (w_index != 0 || w_value != 0) { value = -EDOM; break; } @@ -1324,7 +1325,7 @@ static int class_setup_req(struct fsg_dev *fsg, if (ctrl->bRequestType != (USB_DIR_IN | USB_TYPE_CLASS | USB_RECIP_INTERFACE)) break; - if (w_index != 0) { + if (w_index != 0 || w_value != 0) { value = -EDOM; break; } @@ -1343,7 +1344,7 @@ static int class_setup_req(struct fsg_dev *fsg, if (ctrl->bRequestType != (USB_DIR_OUT | USB_TYPE_CLASS | USB_RECIP_INTERFACE)) break; - if (w_index != 0) { + if (w_index != 0 || w_value != 0) { value = -EDOM; break; } -- cgit v1.2.3 From 3aec6e26d7655eea07be8bbec4728447274ed43f Mon Sep 17 00:00:00 2001 From: "Robert P. J. Day" Date: Mon, 30 Jul 2007 06:38:31 -0400 Subject: USB: Typo: "USB_SAFE_PADDED" -> "USB_SERIAL_SAFE_PADDED". Fix typo in safe_serial.c to match the actual CONFIG variable. Signed-off-by: Robert P. J. Day Signed-off-by: Greg Kroah-Hartman --- drivers/usb/serial/safe_serial.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/drivers/usb/serial/safe_serial.c b/drivers/usb/serial/safe_serial.c index 86899d55d8d..51669b7622b 100644 --- a/drivers/usb/serial/safe_serial.c +++ b/drivers/usb/serial/safe_serial.c @@ -74,13 +74,13 @@ #include -#ifndef CONFIG_USB_SAFE_PADDED -#define CONFIG_USB_SAFE_PADDED 0 +#ifndef CONFIG_USB_SERIAL_SAFE_PADDED +#define CONFIG_USB_SERIAL_SAFE_PADDED 0 #endif static int debug; static int safe = 1; -static int padded = CONFIG_USB_SAFE_PADDED; +static int padded = CONFIG_USB_SERIAL_SAFE_PADDED; #define DRIVER_VERSION "v0.0b" #define DRIVER_AUTHOR "sl@lineo.com, tbr@lineo.com" -- cgit v1.2.3 From 5b570d43cea0f5a6aa5bec2da2a0f68b96a37346 Mon Sep 17 00:00:00 2001 From: Gabriel C Date: Mon, 30 Jul 2007 12:57:03 +0200 Subject: USB: u132-hcd.c - Fix a warning when CONFIG_PM=n I noticed this warning with CONFING_PM=n ... drivers/usb/host/u132-hcd.c:1525: warning: 'port_power' defined but not used ... Signed-off-by: Gabriel Craciunescu Signed-off-by: Greg Kroah-Hartman --- drivers/usb/host/u132-hcd.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/drivers/usb/host/u132-hcd.c b/drivers/usb/host/u132-hcd.c index 7f765ec038c..b88eb3c62c0 100644 --- a/drivers/usb/host/u132-hcd.c +++ b/drivers/usb/host/u132-hcd.c @@ -1520,12 +1520,15 @@ static void u132_hcd_endp_work_scheduler(struct work_struct *work) } } } +#ifdef CONFIG_PM static void port_power(struct u132 *u132, int pn, int is_on) { u132->port[pn].power = is_on; } +#endif + static void u132_power(struct u132 *u132, int is_on) { struct usb_hcd *hcd = u132_to_hcd(u132) -- cgit v1.2.3 From 96443218be7f61027c23772d048a1bf549dfb2d7 Mon Sep 17 00:00:00 2001 From: Faidon Liambotis Date: Tue, 7 Aug 2007 05:46:05 +0300 Subject: USB: fix support for Dell Wireless Broadband (aka WWAN) Dell Wireless Broadband ExpressCards are rebrands of Novatel's cards. Add all of their known PCI IDs to date along with their mapping to the exact Novatel model to the Option driver which already claims to support them. Signed-off-by: Faidon Liambotis Signed-off-by: Greg Kroah-Hartman --- drivers/usb/serial/airprime.c | 1 - drivers/usb/serial/option.c | 10 +++++++--- 2 files changed, 7 insertions(+), 4 deletions(-) diff --git a/drivers/usb/serial/airprime.c b/drivers/usb/serial/airprime.c index cff6fd190a2..77bb893bf2e 100644 --- a/drivers/usb/serial/airprime.c +++ b/drivers/usb/serial/airprime.c @@ -18,7 +18,6 @@ static struct usb_device_id id_table [] = { { USB_DEVICE(0x0c88, 0x17da) }, /* Kyocera Wireless KPC650/Passport */ - { USB_DEVICE(0x413c, 0x8115) }, /* Dell Wireless HSDPA 5500 */ { }, }; MODULE_DEVICE_TABLE(usb, id_table); diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c index 84c12b5f127..4cb3c165742 100644 --- a/drivers/usb/serial/option.c +++ b/drivers/usb/serial/option.c @@ -110,6 +110,7 @@ static int option_send_setup(struct usb_serial_port *port); #define HUAWEI_PRODUCT_E220 0x1003 #define NOVATELWIRELESS_VENDOR_ID 0x1410 +#define DELL_VENDOR_ID 0x413C #define ANYDATA_VENDOR_ID 0x16d5 #define ANYDATA_PRODUCT_ADU_E100A 0x6501 @@ -119,8 +120,6 @@ static int option_send_setup(struct usb_serial_port *port); #define BANDRICH_PRODUCT_C100_1 0x1002 #define BANDRICH_PRODUCT_C100_2 0x1003 -#define DELL_VENDOR_ID 0x413C - static struct usb_device_id option_ids[] = { { USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_COLT) }, { USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_RICOLA) }, @@ -171,11 +170,16 @@ static struct usb_device_id option_ids[] = { { USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, 0x2110) }, /* Novatel Merlin ES620 / Merlin ES720 / Ovation U720 */ { USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, 0x2130) }, /* Novatel Merlin ES620 SM Bus */ { USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, 0x2410) }, /* Novatel EU740 */ + { USB_DEVICE(DELL_VENDOR_ID, 0x8114) }, /* Dell Wireless 5700 Mobile Broadband CDMA/EVDO Mini-Card == Novatel Expedite EV620 CDMA/EV-DO */ + { USB_DEVICE(DELL_VENDOR_ID, 0x8115) }, /* Dell Wireless 5500 Mobile Broadband HSDPA Mini-Card == Novatel Expedite EU740 HSDPA/3G */ + { USB_DEVICE(DELL_VENDOR_ID, 0x8116) }, /* Dell Wireless 5505 Mobile Broadband HSDPA Mini-Card == Novatel Expedite EU740 HSDPA/3G */ + { USB_DEVICE(DELL_VENDOR_ID, 0x8117) }, /* Dell Wireless 5700 Mobile Broadband CDMA/EVDO ExpressCard == Novatel Merlin XV620 CDMA/EV-DO */ + { USB_DEVICE(DELL_VENDOR_ID, 0x8118) }, /* Dell Wireless 5510 Mobile Broadband HSDPA ExpressCard == Novatel Merlin XU870 HSDPA/3G */ + { USB_DEVICE(DELL_VENDOR_ID, 0x8128) }, /* Dell Wireless 5700 Mobile Broadband CDMA/EVDO Mini-Card == Novatel Expedite E720 CDMA/EV-DO */ { USB_DEVICE(ANYDATA_VENDOR_ID, ANYDATA_PRODUCT_ADU_E100A) }, { USB_DEVICE(ANYDATA_VENDOR_ID, ANYDATA_PRODUCT_ADU_500A) }, { USB_DEVICE(BANDRICH_VENDOR_ID, BANDRICH_PRODUCT_C100_1) }, { USB_DEVICE(BANDRICH_VENDOR_ID, BANDRICH_PRODUCT_C100_2) }, - { USB_DEVICE(DELL_VENDOR_ID, 0x8118) }, /* Dell Wireless 5510 Mobile Broadband HSDPA ExpressCard */ { } /* Terminating entry */ }; MODULE_DEVICE_TABLE(usb, option_ids); -- cgit v1.2.3 From a3b53514bd89c77c6aaf80b0ea37249d79c3f3bd Mon Sep 17 00:00:00 2001 From: Paul Mundt Date: Tue, 7 Aug 2007 19:21:09 +0900 Subject: usb: Enable hcd support on SH unconditionally. Previous boards were likely seeing USB_ARCH_HAS_HCD selected by way of PCMCIA or PCI, though none of those are required for hcd support on SH. Enable support unconditionally. Signed-off-by: Paul Mundt Signed-off-by: Greg Kroah-Hartman --- drivers/usb/Kconfig | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/usb/Kconfig b/drivers/usb/Kconfig index 63436892688..7580aa5da0f 100644 --- a/drivers/usb/Kconfig +++ b/drivers/usb/Kconfig @@ -21,6 +21,7 @@ config USB_ARCH_HAS_HCD default y if USB_ARCH_HAS_EHCI default y if PCMCIA && !M32R # sl811_cs default y if ARM # SL-811 + default y if SUPERH # r8a66597-hcd default PCI # many non-PCI SOC chips embed OHCI -- cgit v1.2.3 From 71ee9a6c6c882c6293d7f2f96d2cd6d78beaf093 Mon Sep 17 00:00:00 2001 From: Paul Mundt Date: Tue, 7 Aug 2007 19:21:42 +0900 Subject: usb: r8a66597-hcd: fix up error path. Currently when registration fails we're left with a stray reference to release_mem_region(), this leads to the following case: r8a66597_hcd r8a66597_hcd: irq 13, io base 0x18040000 drivers/usb/host/r8a66597-hcd.c: register access fail. r8a66597_hcd r8a66597_hcd: startup error -6 r8a66597_hcd r8a66597_hcd: USB bus 1 deregistered drivers/usb/host/r8a66597-hcd.c: Failed to add hcd Trying to free nonexistent resource <0000000018040000-0000000018040000> This fixes it up. Signed-off-by: Paul Mundt Signed-off-by: Greg Kroah-Hartman --- drivers/usb/host/r8a66597-hcd.c | 2 -- 1 file changed, 2 deletions(-) diff --git a/drivers/usb/host/r8a66597-hcd.c b/drivers/usb/host/r8a66597-hcd.c index d60f1985320..40a1de4c256 100644 --- a/drivers/usb/host/r8a66597-hcd.c +++ b/drivers/usb/host/r8a66597-hcd.c @@ -2208,8 +2208,6 @@ static int __init r8a66597_probe(struct platform_device *pdev) clean_up: if (reg) iounmap(reg); - if (res) - release_mem_region(res->start, 1); return ret; } -- cgit v1.2.3 From 8b2580e26565246cb196b5e9469b5aa5073d48ec Mon Sep 17 00:00:00 2001 From: David Brownell Date: Tue, 7 Aug 2007 21:16:05 -0700 Subject: USB: quirks: multicard reader doesn't like autosuspend It appears that one reason the "iConnect"-labeled multi-card reader was on sale for only $5 is that it doesn't handle suspend/resume correctly. Other than that, it was a good deal for a highspeed MMC/SD bridge. Signed-off-by: David Brownell Signed-off-by: Greg Kroah-Hartman --- drivers/usb/core/quirks.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/drivers/usb/core/quirks.c b/drivers/usb/core/quirks.c index b7917c5a3c6..dc81f46b8c9 100644 --- a/drivers/usb/core/quirks.c +++ b/drivers/usb/core/quirks.c @@ -70,6 +70,9 @@ static const struct usb_device_id usb_quirk_list[] = { /* Philips PSC805 audio device */ { USB_DEVICE(0x0471, 0x0155), .driver_info = USB_QUIRK_RESET_RESUME }, + /* Alcor multi-card reader */ + { USB_DEVICE(0x058f, 0x6366), .driver_info = USB_QUIRK_NO_AUTOSUSPEND }, + /* RIM Blackberry */ { USB_DEVICE(0x0fca, 0x0001), .driver_info = USB_QUIRK_NO_AUTOSUSPEND }, { USB_DEVICE(0x0fca, 0x0004), .driver_info = USB_QUIRK_NO_AUTOSUSPEND }, -- cgit v1.2.3 From c1f8ea7d350d46c68f9d5293c4101816170301bc Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?S=C3=B8ren=20Hauberg?= Date: Wed, 8 Aug 2007 10:50:17 +0200 Subject: USB: Support for the Evolution Scorpion robots MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit The attached (mostly trivial) patches adds support for the Evolution Scorpion Robots. Evolution Robotics supplies a patch against 2.6.8 with their software. My patch is based on their work, so I don't know if I can sign it off, or if you need some Evolution people to do this (which might be hard). The patch adds device ID's for some robots which is trivial. From: Søren Hauberg Acked-by: Alan Cox Signed-off-by: Greg Kroah-Hartman Søren --- drivers/usb/serial/ftdi_sio.c | 2 ++ drivers/usb/serial/ftdi_sio.h | 3 +++ 2 files changed, 5 insertions(+) diff --git a/drivers/usb/serial/ftdi_sio.c b/drivers/usb/serial/ftdi_sio.c index 7b1673a4407..1370c423d7c 100644 --- a/drivers/usb/serial/ftdi_sio.c +++ b/drivers/usb/serial/ftdi_sio.c @@ -538,6 +538,8 @@ static struct usb_device_id id_table_combined [] = { { USB_DEVICE(FTDI_VID, FTDI_TERATRONIK_VCP_PID) }, { USB_DEVICE(FTDI_VID, FTDI_TERATRONIK_D2XX_PID) }, { USB_DEVICE(EVOLUTION_VID, EVOLUTION_ER1_PID) }, + { USB_DEVICE(EVOLUTION_VID, EVO_HYBRID_PID) }, + { USB_DEVICE(EVOLUTION_VID, EVO_RCM4_PID) }, { USB_DEVICE(FTDI_VID, FTDI_ARTEMIS_PID) }, { USB_DEVICE(FTDI_VID, FTDI_ATIK_ATK16_PID) }, { USB_DEVICE(FTDI_VID, FTDI_ATIK_ATK16C_PID) }, diff --git a/drivers/usb/serial/ftdi_sio.h b/drivers/usb/serial/ftdi_sio.h index d9e49716db1..c70e1de6389 100644 --- a/drivers/usb/serial/ftdi_sio.h +++ b/drivers/usb/serial/ftdi_sio.h @@ -430,6 +430,9 @@ */ #define EVOLUTION_VID 0xDEEE /* Vendor ID */ #define EVOLUTION_ER1_PID 0x0300 /* ER1 Control Module */ +#define EVO_8U232AM_PID 0x02FF /* Evolution robotics RCM2 (FT232AM)*/ +#define EVO_HYBRID_PID 0x0302 /* Evolution robotics RCM4 PID (FT232BM)*/ +#define EVO_RCM4_PID 0x0303 /* Evolution robotics RCM4 PID */ /* Pyramid Computer GmbH */ #define FTDI_PYRAMID_PID 0xE6C8 /* Pyramid Appliance Display */ -- cgit v1.2.3 From e48eb085aca2971a1249efbb68f33e9ebca1395e Mon Sep 17 00:00:00 2001 From: Andy Green Date: Thu, 9 Aug 2007 12:19:38 -0700 Subject: USB: belkin_sa: avoid divide by zero error The belkin_sa module has a problem coping with a 0 return from tty_get_baud_rate() -- the subsequent BELKIN_SA_BAUD macro drivers/usb/serial/belkin_sa.h:#define BELKIN_SA_BAUD(b) (230400/b) performs a divide with it leading to the following divide error: usb 3-1: Belkin / Peracom / GoHubs USB Serial Adapter converter now attached to ttyUSB0 PM: Adding info for No Bus:usbdev3.3_ep81 PM: Adding info for No Bus:usbdev3.3_ep01 PM: Adding info for No Bus:usbdev3.3_ep82 divide error: 0000 [#1] SMP Modules linked in: vfat fat iwl3945 mac80211 cfg80211 belkin_sa usbserial usb_storage autofs4 vmnet(P) vmmon(P) aes nf_conntrack_netbios_ns ipt_REJECT nf_conntrack_ipv4 xt_state nf_conntrack nfnetlink xt_tcpudp iptable_filter ip_tables x_tables cpufreq_ondemand acpi_cpufreq video output sbs button dock battery ac arc4 snd_hda_intel ecb blkcipher snd_seq_dummy snd_seq_oss snd_seq_midi_event snd_seq snd_seq_device snd_pcm_oss sr_mod snd_mixer_oss rtc_cmos cdrom iTCO_wdt iTCO_vendor_support snd_pcm rtc_core snd_timer serio_raw b44 ssb rtc_lib parport ata_piix snd soundcore snd_page_alloc mii ata_generic sg ahci libata sd_mod scsi_mod ext3 jbd mbcache ehci_hcd ohci_hcd uhci_hcd CPU: 1 EIP: 0060:[] Tainted: P VLI EFLAGS: 00010246 (2.6.23-rc1 #1) EIP is at belkin_sa_set_termios+0x18e/0x5b9 [belkin_sa] eax: 00038400 ebx: 00000000 ecx: 00000000 edx: 00000000 esi: 00038400 edi: 00001cb2 ebp: de49adb0 esp: de49ad6c ds: 007b es: 007b fs: 00d8 gs: 0033 ss: 0068 Process minicom (pid: 7306, ti=de49a000 task=eed6c3b0 task.ti=de49a000) Stack: d85c74f0 00000046 00000002 00000001 d85c74f0 d85c74f0 00000246 c887c658 00000001 00000cb0 00000001 00000084 00000000 d01b58c0 f6ba10e0 de49ade8 de49ae40 de49add0 f8e2526b d85c74b8 ca6e6dbc de49ae40 d85c746c eded72e8 Call Trace: [] show_trace_log_lvl+0x1a/0x2f [] show_stack_log_lvl+0x9b/0xa3 [] show_registers+0x1b8/0x289 [] die+0x113/0x246 [] do_trap+0x8a/0xa3 [] do_divide_error+0x85/0x8f [] error_code+0x72/0x78 [] serial_set_termios+0x86/0x8d [usbserial] [] set_termios+0x309/0x34c [] n_tty_ioctl+0x158/0x4ba [] tty_ioctl+0xc78/0xcd6 [] do_ioctl+0x50/0x67 [] vfs_ioctl+0x249/0x25c [] sys_ioctl+0x49/0x61 [] sysenter_past_esp+0x5f/0x99 ======================= Code: 85 c0 79 14 c7 44 24 04 67 1c dd f8 c7 04 24 d4 1e dd f8 e8 96 99 65 c7 8b 46 04 be 00 84 03 00 e8 47 11 77 c7 31 d2 89 c1 89 f0 f1 66 85 c0 89 c1 b8 01 00 00 00 0f 44 c8 8b 45 d8 85 db 8b EIP: [] belkin_sa_set_termios+0x18e/0x5b9 [belkin_sa] SS:ESP 0068:de49ad6c The small patch below should take care of this situation. Note that my kernel was tainted (vmware) but the problem will occur if tty_get_baud_rate() ever returns zero and should be taken care of. Signed-off-by: Andy Green Cc: William Greathouse Cc: Alan Cox Cc: stable Signed-off-by: Andrew Morton Signed-off-by: Greg Kroah-Hartman --- drivers/usb/serial/belkin_sa.c | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/drivers/usb/serial/belkin_sa.c b/drivers/usb/serial/belkin_sa.c index e67ce25f751..86724e88570 100644 --- a/drivers/usb/serial/belkin_sa.c +++ b/drivers/usb/serial/belkin_sa.c @@ -383,6 +383,10 @@ static void belkin_sa_set_termios (struct usb_serial_port *port, struct ktermios } baud = tty_get_baud_rate(port->tty); + if (baud == 0) { + dbg("%s - tty_get_baud_rate says 0 baud", __FUNCTION__); + return; + } urb_value = BELKIN_SA_BAUD(baud); /* Clip to maximum speed */ if (urb_value == 0) -- cgit v1.2.3 From 1207cf84f289694ba7ba8eeaa346a0195b3de606 Mon Sep 17 00:00:00 2001 From: Jesper Juhl Date: Thu, 9 Aug 2007 23:02:36 +0200 Subject: USB: Fix a memory leak in em28xx_usb_probe() If, in em28xx_usb_probe() the memory allocation dev->alt_max_pkt_size = kmalloc(32* dev->num_alt,GFP_KERNEL); fails, then we'll bail out and return -ENOMEM. The problem is that in that case we don't free the storage allocated to 'dev', thus causing a memory leak. This patch fixes the leak by freeing 'dev' before we return -ENOMEM. This fixes Coverity bug #647. Signed-off-by: Jesper Juhl Signed-off-by: Greg Kroah-Hartman --- drivers/media/video/em28xx/em28xx-video.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/media/video/em28xx/em28xx-video.c b/drivers/media/video/em28xx/em28xx-video.c index 2c7b158ce7e..40307f3f6fe 100644 --- a/drivers/media/video/em28xx/em28xx-video.c +++ b/drivers/media/video/em28xx/em28xx-video.c @@ -1772,6 +1772,7 @@ static int em28xx_usb_probe(struct usb_interface *interface, if (dev->alt_max_pkt_size == NULL) { em28xx_errdev("out of memory!\n"); em28xx_devused&=~(1< Date: Wed, 8 Aug 2007 17:16:12 -0400 Subject: USB: remove DEBUG definition from dummy_hcd This patch (as958) removes an unneeded and unwanted #define line from dummy_hcd. Signed-off-by: Alan Stern Signed-off-by: Greg Kroah-Hartman --- drivers/usb/gadget/dummy_hcd.c | 2 -- 1 file changed, 2 deletions(-) diff --git a/drivers/usb/gadget/dummy_hcd.c b/drivers/usb/gadget/dummy_hcd.c index f2fbdc7fe37..d008d1360a7 100644 --- a/drivers/usb/gadget/dummy_hcd.c +++ b/drivers/usb/gadget/dummy_hcd.c @@ -34,8 +34,6 @@ * bypassing some hardware (and driver) issues. UML could help too. */ -#define DEBUG - #include #include #include -- cgit v1.2.3 From a66639ab286250fe66b960c34ac91d0b2ee58a79 Mon Sep 17 00:00:00 2001 From: Thomas Viehmann Date: Wed, 25 Jul 2007 10:21:21 +0200 Subject: usb-serial: fix oti6858.c segfault in termios handling The oti6858 usb serial driver should use kernel_termios_to_user_termios/ user_termios_to_kernel_termios to avoid segfaults because the kernel uses a structure differing from that of user space with a different size. Signed-off-by: Thomas Viehmann CC: stable Signed-off-by: Greg Kroah-Hartman --- drivers/usb/serial/oti6858.c | 10 ++++------ 1 file changed, 4 insertions(+), 6 deletions(-) diff --git a/drivers/usb/serial/oti6858.c b/drivers/usb/serial/oti6858.c index d7db71eca52..833ada47fc5 100644 --- a/drivers/usb/serial/oti6858.c +++ b/drivers/usb/serial/oti6858.c @@ -818,19 +818,17 @@ static int oti6858_ioctl(struct usb_serial_port *port, struct file *file, switch (cmd) { case TCGETS: - if (copy_to_user(user_arg, port->tty->termios, - sizeof(struct ktermios))) { + if (kernel_termios_to_user_termios((struct ktermios __user *)arg, + port->tty->termios)) return -EFAULT; - } return 0; case TCSETS: case TCSETSW: /* FIXME: this is not the same! */ case TCSETSF: /* FIXME: this is not the same! */ - if (copy_from_user(port->tty->termios, user_arg, - sizeof(struct ktermios))) { + if (user_termios_to_kernel_termios(port->tty->termios, + (struct ktermios __user *)arg)) return -EFAULT; - } oti6858_set_termios(port, NULL); return 0; -- cgit v1.2.3 From f095137e799ddb6a7c2bf0e4c73cda193ab9df41 Mon Sep 17 00:00:00 2001 From: Oliver Neukum Date: Tue, 14 Aug 2007 18:48:08 +0200 Subject: USB: blacklist Samsung ML-2010 printer Hi, this printer does not survive suspension. Signed-off-by: Oliver Neukum Signed-off-by: Greg Kroah-Hartman --- drivers/usb/core/quirks.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/usb/core/quirks.c b/drivers/usb/core/quirks.c index dc81f46b8c9..51d14032b27 100644 --- a/drivers/usb/core/quirks.c +++ b/drivers/usb/core/quirks.c @@ -56,6 +56,8 @@ static const struct usb_device_id usb_quirk_list[] = { { USB_DEVICE(0x04b8, 0x0121), .driver_info = USB_QUIRK_NO_AUTOSUSPEND }, /* Seiko Epson Corp.*/ { USB_DEVICE(0x04b8, 0x0122), .driver_info = USB_QUIRK_NO_AUTOSUSPEND }, + /* Samsung ML-2010 printer */ + { USB_DEVICE(0x04e8, 0x326c), .driver_info = USB_QUIRK_NO_AUTOSUSPEND }, /* Samsung ML-2510 Series printer */ { USB_DEVICE(0x04e8, 0x327e), .driver_info = USB_QUIRK_NO_AUTOSUSPEND }, /* Elsa MicroLink 56k (V.250) */ -- cgit v1.2.3 From 46dede4690bbb23a2c9d60561e2e4fdc3e6bee61 Mon Sep 17 00:00:00 2001 From: Alan Stern Date: Tue, 14 Aug 2007 10:56:10 -0400 Subject: USB: accept 1-byte Device Status replies, fixing some b0rken devices Some devices have a bug which causes them to send a 1-byte reply to Get-Device-Status requests instead of 2 bytes as required by the spec. This doesn't play well with autosuspend, since we look for a valid status reply to make sure the device is still present when it resumes. Without both bytes, we assume the device has been disconnected. Lack of the second byte shouldn't matter much, since the spec requires it always to be equal to 0. Hence this patch (as959) causes finish_port_resume() to accept a 1-byte reply as valid. Signed-off-by: Alan Stern Acked-by: David Brownell Signed-off-by: Greg Kroah-Hartman --- drivers/usb/core/hub.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c index e341a1da517..f7b337feb3e 100644 --- a/drivers/usb/core/hub.c +++ b/drivers/usb/core/hub.c @@ -1644,9 +1644,10 @@ static int finish_port_resume(struct usb_device *udev) * and device drivers will know about any resume quirks. */ if (status == 0) { + devstatus = 0; status = usb_get_status(udev, USB_RECIP_DEVICE, 0, &devstatus); if (status >= 0) - status = (status == 2 ? 0 : -ENODEV); + status = (status > 0 ? 0 : -ENODEV); } if (status) { -- cgit v1.2.3 From fa0de2b614ca89d14d046e6756ba020fd386ff71 Mon Sep 17 00:00:00 2001 From: M4rkusXXL Date: Fri, 10 Aug 2007 14:53:32 -0700 Subject: usb: typo in usb R8A66597 HCD config Signed-off-by: Andrew Morton Signed-off-by: Greg Kroah-Hartman --- drivers/usb/host/Kconfig | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/usb/host/Kconfig b/drivers/usb/host/Kconfig index 2f529828c74..565d6ef4c4c 100644 --- a/drivers/usb/host/Kconfig +++ b/drivers/usb/host/Kconfig @@ -237,7 +237,7 @@ config USB_SL811_CS module will be called "sl811_cs". config USB_R8A66597_HCD - tristate "R8A66597 HCD suppoort" + tristate "R8A66597 HCD support" depends on USB help The R8A66597 is a USB 2.0 host and peripheral controller. -- cgit v1.2.3 From 2f67cd5b1d5066d11761aebb0bf4b76bc253cc99 Mon Sep 17 00:00:00 2001 From: Alan Stern Date: Thu, 16 Aug 2007 16:16:00 -0400 Subject: usb-storage: fix bugs in the disconnect pathway This patch (as961) fixes a couple of bugs in the disconnect pathway of usb-storage. The first problem, which apparently has been around for a while although nobody noticed it, shows up when an aborted command is still pending when a disconnect occurs. The SCSI error-handler will continue to wait in command_abort() until the us->notify completion is signalled. Thus quiesce_and_remove_host() needs to signal it. The second problem was introduced recently along with autosuspend support. Since usb_stor_scan_thread() now calls usb_autopm_put_interface() before exiting, we can't simply leave the scanning thread running after a disconnect; we must wait until the thread exits. This is solved by adding a new struct completion to the private data structure. Fortuitously, it allows the removal of the rather clunky mechanism used in the past to insure that all threads have finished before the module is unloaded. Signed-off-by: Alan Stern CC: Matthew Dharm Signed-off-by: Greg Kroah-Hartman --- drivers/usb/storage/usb.c | 33 ++++++--------------------------- drivers/usb/storage/usb.h | 1 + 2 files changed, 7 insertions(+), 27 deletions(-) diff --git a/drivers/usb/storage/usb.c b/drivers/usb/storage/usb.c index 28842d208bb..25e557d4fe6 100644 --- a/drivers/usb/storage/usb.c +++ b/drivers/usb/storage/usb.c @@ -112,13 +112,6 @@ module_param(delay_use, uint, S_IRUGO | S_IWUSR); MODULE_PARM_DESC(delay_use, "seconds to delay before using a new device"); -/* These are used to make sure the module doesn't unload before all the - * threads have exited. - */ -static atomic_t total_threads = ATOMIC_INIT(0); -static DECLARE_COMPLETION(threads_gone); - - /* * The entries in this table correspond, line for line, * with the entries of us_unusual_dev_list[]. @@ -879,9 +872,6 @@ static void quiesce_and_remove_host(struct us_data *us) usb_stor_stop_transport(us); wake_up(&us->delay_wait); - /* It doesn't matter if the SCSI-scanning thread is still running. - * The thread will exit when it sees the DISCONNECTING flag. */ - /* queuecommand won't accept any new commands and the control * thread won't execute a previously-queued command. If there * is such a command pending, complete it with an error. */ @@ -891,12 +881,16 @@ static void quiesce_and_remove_host(struct us_data *us) scsi_lock(host); us->srb->scsi_done(us->srb); us->srb = NULL; + complete(&us->notify); /* in case of an abort */ scsi_unlock(host); } mutex_unlock(&us->dev_mutex); /* Now we own no commands so it's safe to remove the SCSI host */ scsi_remove_host(host); + + /* Wait for the SCSI-scanning thread to stop */ + wait_for_completion(&us->scanning_done); } /* Second stage of disconnect processing: deallocate all resources */ @@ -947,9 +941,8 @@ retry: /* Should we unbind if no devices were detected? */ } - scsi_host_put(us_to_host(us)); usb_autopm_put_interface(us->pusb_intf); - complete_and_exit(&threads_gone, 0); + complete_and_exit(&us->scanning_done, 0); } @@ -984,6 +977,7 @@ static int storage_probe(struct usb_interface *intf, init_MUTEX_LOCKED(&(us->sema)); init_completion(&(us->notify)); init_waitqueue_head(&us->delay_wait); + init_completion(&us->scanning_done); /* Associate the us_data structure with the USB device */ result = associate_dev(us, intf); @@ -1033,11 +1027,6 @@ static int storage_probe(struct usb_interface *intf, goto BadDevice; } - /* Take a reference to the host for the scanning thread and - * count it among all the threads we have launched. Then - * start it up. */ - scsi_host_get(us_to_host(us)); - atomic_inc(&total_threads); usb_autopm_get_interface(intf); /* dropped in the scanning thread */ wake_up_process(th); @@ -1104,16 +1093,6 @@ static void __exit usb_stor_exit(void) US_DEBUGP("-- calling usb_deregister()\n"); usb_deregister(&usb_storage_driver) ; - /* Don't return until all of our control and scanning threads - * have exited. Since each thread signals threads_gone as its - * last act, we have to call wait_for_completion the right number - * of times. - */ - while (atomic_read(&total_threads) > 0) { - wait_for_completion(&threads_gone); - atomic_dec(&total_threads); - } - usb_usual_clear_present(USB_US_TYPE_STOR); } diff --git a/drivers/usb/storage/usb.h b/drivers/usb/storage/usb.h index 6445665b157..8d87503e256 100644 --- a/drivers/usb/storage/usb.h +++ b/drivers/usb/storage/usb.h @@ -150,6 +150,7 @@ struct us_data { struct semaphore sema; /* to sleep thread on */ struct completion notify; /* thread begin/end */ wait_queue_head_t delay_wait; /* wait during scan, reset */ + struct completion scanning_done; /* wait for scan thread */ /* subdriver information */ void *extra; /* Any extra data */ -- cgit v1.2.3 From bdd203a002681d7b2e133e485573f43d41e4cf69 Mon Sep 17 00:00:00 2001 From: David Brownell Date: Fri, 17 Aug 2007 22:19:59 -0700 Subject: USB: ohci, fix oddball gcc warning Some versions of GCC recently grew annoying warnings about constants. This gets rid of that warning from the OHCI driver. Signed-off-by: David Brownell Signed-off-by: Greg Kroah-Hartman --- drivers/usb/host/ohci-dbg.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/usb/host/ohci-dbg.c b/drivers/usb/host/ohci-dbg.c index 6f9e43e9a6c..f61c6cdd06f 100644 --- a/drivers/usb/host/ohci-dbg.c +++ b/drivers/usb/host/ohci-dbg.c @@ -74,7 +74,7 @@ urb_print (struct urb * urb, char * str, int small) #define ohci_dbg_sw(ohci, next, size, format, arg...) \ do { \ - if (next) { \ + if (next != NULL) { \ unsigned s_len; \ s_len = scnprintf (*next, *size, format, ## arg ); \ *size -= s_len; *next += s_len; \ -- cgit v1.2.3 From 5f546c5835fc301694da6c8ae1467b19f4cfec24 Mon Sep 17 00:00:00 2001 From: Oliver Neukum Date: Thu, 16 Aug 2007 10:55:18 +0200 Subject: USB: quirky mass storage device this device has been reported to break with autosuspend. Signed-off-by: Oliver Neukum Signed-off-by: Greg Kroah-Hartman --- drivers/usb/core/quirks.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/usb/core/quirks.c b/drivers/usb/core/quirks.c index 51d14032b27..78a98ffae3b 100644 --- a/drivers/usb/core/quirks.c +++ b/drivers/usb/core/quirks.c @@ -30,6 +30,8 @@ static const struct usb_device_id usb_quirk_list[] = { /* HP 5300/5370C scanner */ { USB_DEVICE(0x03f0, 0x0701), .driver_info = USB_QUIRK_STRING_FETCH_255 }, + /* Hewlett-Packard PhotoSmart 720 / PhotoSmart 935 (storage) */ + { USB_DEVICE(0x03f0, 0x4002), .driver_info = USB_QUIRK_NO_AUTOSUSPEND }, /* Acer Peripherals Inc. (now BenQ Corp.) Prisa 640BU */ { USB_DEVICE(0x04a5, 0x207e), .driver_info = USB_QUIRK_NO_AUTOSUSPEND }, /* Benq S2W 3300U */ -- cgit v1.2.3 From 53059f4d19eb2cd6cde1bbcb1b7201bec340a47b Mon Sep 17 00:00:00 2001 From: Oliver Neukum Date: Sun, 19 Aug 2007 17:14:34 +0200 Subject: USB: another quirky device for the drive Jean reported. Signed-off-by: Oliver Neukum Signed-off-by: Greg Kroah-Hartman --- drivers/usb/core/quirks.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/usb/core/quirks.c b/drivers/usb/core/quirks.c index 78a98ffae3b..655c15d6039 100644 --- a/drivers/usb/core/quirks.c +++ b/drivers/usb/core/quirks.c @@ -68,6 +68,8 @@ static const struct usb_device_id usb_quirk_list[] = { { USB_DEVICE(0x05d8, 0x4005), .driver_info = USB_QUIRK_NO_AUTOSUSPEND }, /* Agfa Snapscan1212u */ { USB_DEVICE(0x06bd, 0x2061), .driver_info = USB_QUIRK_NO_AUTOSUSPEND }, + /* Seagate RSS LLC */ + { USB_DEVICE(0x0bc2, 0x3000), .driver_info = USB_QUIRK_NO_AUTOSUSPEND }, /* Umax [hex] Astra 3400U */ { USB_DEVICE(0x1606, 0x0060), .driver_info = USB_QUIRK_NO_AUTOSUSPEND }, -- cgit v1.2.3 From 04cab1329336d4577d6638360c905e360934b425 Mon Sep 17 00:00:00 2001 From: Christian Heim Date: Sun, 19 Aug 2007 13:29:15 +0200 Subject: USB: Adding support for HTC Smartphones to ipaq This patch enables support for HTC Smartphones. The original patch is at https://bugs.gentoo.org/show_bug.cgi?id=187522. Original author is Mike Doty . Signed-off-by: Christian Heim Signed-off-by: Greg Kroah-Hartman --- drivers/usb/serial/ipaq.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/usb/serial/ipaq.c b/drivers/usb/serial/ipaq.c index 0455c1552ae..6a3a704b584 100644 --- a/drivers/usb/serial/ipaq.c +++ b/drivers/usb/serial/ipaq.c @@ -545,6 +545,7 @@ static struct usb_device_id ipaq_id_table [] = { { USB_DEVICE(0x413C, 0x4009) }, /* Dell Axim USB Sync */ { USB_DEVICE(0x4505, 0x0010) }, /* Smartphone */ { USB_DEVICE(0x5E04, 0xCE00) }, /* SAGEM Wireless Assistant */ + { USB_DEVICE(0x0BB4, 0x00CF) }, /* HTC smartphone modems */ { } /* Terminating entry */ }; -- cgit v1.2.3 From 3b79cc26708bcc476d4e4bf3846032fa3a1eeb85 Mon Sep 17 00:00:00 2001 From: Oliver Neukum Date: Thu, 16 Aug 2007 16:06:06 +0200 Subject: USB: unkill cxacru atm driver it seems like you overdid it a bit in your quest to clean up the use of urb->status. In this driver you read it the first thing, which means that you are in a race against URB completion you'll usually lose, returning -EINPROGRESS. This kills the driver. Signed-off-by: Oliver Neukum Signed-off-by: Greg Kroah-Hartman --- drivers/usb/atm/cxacru.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) diff --git a/drivers/usb/atm/cxacru.c b/drivers/usb/atm/cxacru.c index 02c52f8d5db..a73e714288e 100644 --- a/drivers/usb/atm/cxacru.c +++ b/drivers/usb/atm/cxacru.c @@ -456,7 +456,6 @@ static int cxacru_start_wait_urb(struct urb *urb, struct completion *done, int* actual_length) { struct timer_list timer; - int status = urb->status; init_timer(&timer); timer.expires = jiffies + msecs_to_jiffies(CMD_TIMEOUT); @@ -468,7 +467,7 @@ static int cxacru_start_wait_urb(struct urb *urb, struct completion *done, if (actual_length) *actual_length = urb->actual_length; - return status; + return urb->status; /* must read status after completion */ } static int cxacru_cm(struct cxacru_data *instance, enum cxacru_cm_request cm, -- cgit v1.2.3 From c39772d82ad453647ea4bf9d793010d86ef5e597 Mon Sep 17 00:00:00 2001 From: Alan Stern Date: Mon, 20 Aug 2007 10:45:28 -0400 Subject: USB: allow retry on descriptor fetch errors This patch (as964) was suggested by Steffen Koepf. It makes usb_get_descriptor() retry on all errors other than ETIMEDOUT, instead of only on EPIPE. This helps with some devices. Signed-off-by: Alan Stern CC: stable Signed-off-by: Greg Kroah-Hartman --- drivers/usb/core/message.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/usb/core/message.c b/drivers/usb/core/message.c index b6bd05e3d43..5498506e9c5 100644 --- a/drivers/usb/core/message.c +++ b/drivers/usb/core/message.c @@ -637,12 +637,12 @@ int usb_get_descriptor(struct usb_device *dev, unsigned char type, unsigned char memset(buf,0,size); // Make sure we parse really received data for (i = 0; i < 3; ++i) { - /* retry on length 0 or stall; some devices are flakey */ + /* retry on length 0 or error; some devices are flakey */ result = usb_control_msg(dev, usb_rcvctrlpipe(dev, 0), USB_REQ_GET_DESCRIPTOR, USB_DIR_IN, (type << 8) + index, 0, buf, size, USB_CTRL_GET_TIMEOUT); - if (result == 0 || result == -EPIPE) + if (result <= 0 && result != -ETIMEDOUT) continue; if (result > 1 && ((u8 *)buf)[1] != type) { result = -EPROTO; -- cgit v1.2.3 From 85237f202d46d55c1bffe0c5b1aa3ddc0f1dce4d Mon Sep 17 00:00:00 2001 From: Oliver Neukum Date: Tue, 21 Aug 2007 07:10:42 +0200 Subject: USB: fix DoS in pwc USB video driver the pwc driver has a disconnect method that waits for user space to close the device. This opens up an opportunity for a DoS attack, blocking the USB subsystem and making khubd's task busy wait in kernel space. This patch shifts freeing resources to close if an opened device is disconnected. Signed-off-by: Oliver Neukum CC: stable Signed-off-by: Greg Kroah-Hartman --- drivers/media/video/pwc/pwc-if.c | 52 +++++++++++++++++++++++++++------------- drivers/media/video/pwc/pwc.h | 1 + 2 files changed, 36 insertions(+), 17 deletions(-) diff --git a/drivers/media/video/pwc/pwc-if.c b/drivers/media/video/pwc/pwc-if.c index 9c0e8d18c2f..3d81966d8c4 100644 --- a/drivers/media/video/pwc/pwc-if.c +++ b/drivers/media/video/pwc/pwc-if.c @@ -1196,12 +1196,19 @@ static int pwc_video_open(struct inode *inode, struct file *file) return 0; } + +static void pwc_cleanup(struct pwc_device *pdev) +{ + pwc_remove_sysfs_files(pdev->vdev); + video_unregister_device(pdev->vdev); +} + /* Note that all cleanup is done in the reverse order as in _open */ static int pwc_video_close(struct inode *inode, struct file *file) { struct video_device *vdev = file->private_data; struct pwc_device *pdev; - int i; + int i, hint; PWC_DEBUG_OPEN(">> video_close called(vdev = 0x%p).\n", vdev); @@ -1224,8 +1231,9 @@ static int pwc_video_close(struct inode *inode, struct file *file) pwc_isoc_cleanup(pdev); pwc_free_buffers(pdev); + lock_kernel(); /* Turn off LEDS and power down camera, but only when not unplugged */ - if (pdev->error_status != EPIPE) { + if (!pdev->unplugged) { /* Turn LEDs off */ if (pwc_set_leds(pdev, 0, 0) < 0) PWC_DEBUG_MODULE("Failed to set LED on/off time.\n"); @@ -1234,9 +1242,19 @@ static int pwc_video_close(struct inode *inode, struct file *file) if (i < 0) PWC_ERROR("Failed to power down camera (%d)\n", i); } + pdev->vopen--; + PWC_DEBUG_OPEN("<< video_close() vopen=%d\n", i); + } else { + pwc_cleanup(pdev); + /* Free memory (don't set pdev to 0 just yet) */ + kfree(pdev); + /* search device_hint[] table if we occupy a slot, by any chance */ + for (hint = 0; hint < MAX_DEV_HINTS; hint++) + if (device_hint[hint].pdev == pdev) + device_hint[hint].pdev = NULL; } - pdev->vopen--; - PWC_DEBUG_OPEN("<< video_close() vopen=%d\n", pdev->vopen); + unlock_kernel(); + return 0; } @@ -1791,21 +1809,21 @@ static void usb_pwc_disconnect(struct usb_interface *intf) /* Alert waiting processes */ wake_up_interruptible(&pdev->frameq); /* Wait until device is closed */ - while (pdev->vopen) - schedule(); - /* Device is now closed, so we can safely unregister it */ - PWC_DEBUG_PROBE("Unregistering video device in disconnect().\n"); - pwc_remove_sysfs_files(pdev->vdev); - video_unregister_device(pdev->vdev); - - /* Free memory (don't set pdev to 0 just yet) */ - kfree(pdev); + if(pdev->vopen) { + pdev->unplugged = 1; + } else { + /* Device is closed, so we can safely unregister it */ + PWC_DEBUG_PROBE("Unregistering video device in disconnect().\n"); + pwc_cleanup(pdev); + /* Free memory (don't set pdev to 0 just yet) */ + kfree(pdev); disconnect_out: - /* search device_hint[] table if we occupy a slot, by any chance */ - for (hint = 0; hint < MAX_DEV_HINTS; hint++) - if (device_hint[hint].pdev == pdev) - device_hint[hint].pdev = NULL; + /* search device_hint[] table if we occupy a slot, by any chance */ + for (hint = 0; hint < MAX_DEV_HINTS; hint++) + if (device_hint[hint].pdev == pdev) + device_hint[hint].pdev = NULL; + } unlock_kernel(); } diff --git a/drivers/media/video/pwc/pwc.h b/drivers/media/video/pwc/pwc.h index 910a04f5392..8e8e5b27e77 100644 --- a/drivers/media/video/pwc/pwc.h +++ b/drivers/media/video/pwc/pwc.h @@ -193,6 +193,7 @@ struct pwc_device char vsnapshot; /* snapshot mode */ char vsync; /* used by isoc handler */ char vmirror; /* for ToUCaM series */ + char unplugged; int cmd_len; unsigned char cmd_buf[13]; -- cgit v1.2.3 From 013d27f265de6934ad7fb48fb29ab0172a20ab40 Mon Sep 17 00:00:00 2001 From: Alan Stern Date: Mon, 20 Aug 2007 12:18:39 -0400 Subject: USB: update last_busy field correctly This patch (as966) fixes a bug in the autosuspend code. The last_busy field should be updated whenever any event occurs, not just events that cause an autosuspend or an autoresume. This partially fixes Bugzilla #8892. Signed-off-by: Alan Stern Signed-off-by: Greg Kroah-Hartman --- drivers/usb/core/driver.c | 9 ++++----- 1 file changed, 4 insertions(+), 5 deletions(-) diff --git a/drivers/usb/core/driver.c b/drivers/usb/core/driver.c index 654857493a8..a1ad11d0c47 100644 --- a/drivers/usb/core/driver.c +++ b/drivers/usb/core/driver.c @@ -1224,6 +1224,8 @@ static int usb_autopm_do_device(struct usb_device *udev, int inc_usage_cnt) udev->auto_pm = 1; udev->pm_usage_cnt += inc_usage_cnt; WARN_ON(udev->pm_usage_cnt < 0); + if (inc_usage_cnt) + udev->last_busy = jiffies; if (inc_usage_cnt >= 0 && udev->pm_usage_cnt > 0) { if (udev->state == USB_STATE_SUSPENDED) status = usb_resume_both(udev); @@ -1232,8 +1234,6 @@ static int usb_autopm_do_device(struct usb_device *udev, int inc_usage_cnt) else if (inc_usage_cnt) udev->last_busy = jiffies; } else if (inc_usage_cnt <= 0 && udev->pm_usage_cnt <= 0) { - if (inc_usage_cnt) - udev->last_busy = jiffies; status = usb_suspend_both(udev, PMSG_SUSPEND); } usb_pm_unlock(udev); @@ -1342,16 +1342,15 @@ static int usb_autopm_do_interface(struct usb_interface *intf, else { udev->auto_pm = 1; intf->pm_usage_cnt += inc_usage_cnt; + udev->last_busy = jiffies; if (inc_usage_cnt >= 0 && intf->pm_usage_cnt > 0) { if (udev->state == USB_STATE_SUSPENDED) status = usb_resume_both(udev); if (status != 0) intf->pm_usage_cnt -= inc_usage_cnt; - else if (inc_usage_cnt) + else udev->last_busy = jiffies; } else if (inc_usage_cnt <= 0 && intf->pm_usage_cnt <= 0) { - if (inc_usage_cnt) - udev->last_busy = jiffies; status = usb_suspend_both(udev, PMSG_SUSPEND); } } -- cgit v1.2.3 From d1a94f080f5bdfe46c9fb4954ffe8ae9ec29e44a Mon Sep 17 00:00:00 2001 From: Alan Stern Date: Fri, 17 Aug 2007 10:58:16 -0400 Subject: USB: g_file_storage: fix bug in DMA buffer handling This patch (as963) fixes a recently-introduced bug. The gadget conversion removing DMA-mapped buffer allocation did not remove quite enough code from the g_file_storage driver; DMA pointers were being set to 0. Signed-off-by: Alan Stern Signed-off-by: Greg Kroah-Hartman --- drivers/usb/gadget/file_storage.c | 3 --- 1 file changed, 3 deletions(-) diff --git a/drivers/usb/gadget/file_storage.c b/drivers/usb/gadget/file_storage.c index 01ddb6d3e51..965ad7bec7b 100644 --- a/drivers/usb/gadget/file_storage.c +++ b/drivers/usb/gadget/file_storage.c @@ -599,7 +599,6 @@ enum fsg_buffer_state { struct fsg_buffhd { void *buf; - dma_addr_t dma; enum fsg_buffer_state state; struct fsg_buffhd *next; @@ -2612,7 +2611,6 @@ static int send_status(struct fsg_dev *fsg) fsg->intr_buffhd = bh; // Point to the right buffhd fsg->intreq->buf = bh->inreq->buf; - fsg->intreq->dma = bh->inreq->dma; fsg->intreq->context = bh; start_transfer(fsg, fsg->intr_in, fsg->intreq, &fsg->intreq_busy, &bh->state); @@ -3201,7 +3199,6 @@ reset: if ((rc = alloc_request(fsg, fsg->bulk_out, &bh->outreq)) != 0) goto reset; bh->inreq->buf = bh->outreq->buf = bh->buf; - bh->inreq->dma = bh->outreq->dma = bh->dma; bh->inreq->context = bh->outreq->context = bh; bh->inreq->complete = bulk_in_complete; bh->outreq->complete = bulk_out_complete; -- cgit v1.2.3 From 39d1f8c9fcb241c526efa5fff5869cad7beba98e Mon Sep 17 00:00:00 2001 From: Li Yang Date: Fri, 17 Aug 2007 08:36:44 -0700 Subject: USB: fsl_usb2_udc: fix bug in processing setup requests Kim Liu found that in the original code certain class setup requests are wrongly recognized and processed as standard setup requests. For that reason gadget ether can't work in RNDIS mode with Windows host. The patch fixes the setup request processing code, and makes class requests correctly passed to gadget layer. Signed-off-by: Li Yang Signed-off-by: Kim Liu Signed-off-by: David Brownell Signed-off-by: Greg Kroah-Hartman --- drivers/usb/gadget/fsl_usb2_udc.c | 77 +++++++++++++++++++++------------------ 1 file changed, 41 insertions(+), 36 deletions(-) diff --git a/drivers/usb/gadget/fsl_usb2_udc.c b/drivers/usb/gadget/fsl_usb2_udc.c index 10b2b33b869..d57bcfbc08a 100644 --- a/drivers/usb/gadget/fsl_usb2_udc.c +++ b/drivers/usb/gadget/fsl_usb2_udc.c @@ -1277,31 +1277,32 @@ static void setup_received_irq(struct fsl_udc *udc, udc_reset_ep_queue(udc, 0); + /* We process some stardard setup requests here */ switch (setup->bRequest) { - /* Request that need Data+Status phase from udc */ case USB_REQ_GET_STATUS: - if ((setup->bRequestType & (USB_DIR_IN | USB_TYPE_STANDARD)) + /* Data+Status phase from udc */ + if ((setup->bRequestType & (USB_DIR_IN | USB_TYPE_MASK)) != (USB_DIR_IN | USB_TYPE_STANDARD)) break; ch9getstatus(udc, setup->bRequestType, wValue, wIndex, wLength); - break; + return; - /* Requests that need Status phase from udc */ case USB_REQ_SET_ADDRESS: + /* Status phase from udc */ if (setup->bRequestType != (USB_DIR_OUT | USB_TYPE_STANDARD | USB_RECIP_DEVICE)) break; ch9setaddress(udc, wValue, wIndex, wLength); - break; + return; - /* Handled by udc, no data, status by udc */ case USB_REQ_CLEAR_FEATURE: case USB_REQ_SET_FEATURE: - { /* status transaction */ + /* Status phase from udc */ + { int rc = -EOPNOTSUPP; - if ((setup->bRequestType & USB_RECIP_MASK) - == USB_RECIP_ENDPOINT) { + if ((setup->bRequestType & (USB_RECIP_MASK | USB_TYPE_MASK)) + == (USB_RECIP_ENDPOINT | USB_TYPE_STANDARD)) { int pipe = get_pipe_by_windex(wIndex); struct fsl_ep *ep; @@ -1315,8 +1316,9 @@ static void setup_received_irq(struct fsl_udc *udc, ? 1 : 0); spin_lock(&udc->lock); - } else if ((setup->bRequestType & USB_RECIP_MASK) - == USB_RECIP_DEVICE) { + } else if ((setup->bRequestType & (USB_RECIP_MASK + | USB_TYPE_MASK)) == (USB_RECIP_DEVICE + | USB_TYPE_STANDARD)) { /* Note: The driver has not include OTG support yet. * This will be set when OTG support is added */ if (!udc->gadget.is_otg) @@ -1329,39 +1331,42 @@ static void setup_received_irq(struct fsl_udc *udc, USB_DEVICE_A_ALT_HNP_SUPPORT) udc->gadget.a_alt_hnp_support = 1; rc = 0; - } + } else + break; + if (rc == 0) { if (ep0_prime_status(udc, EP_DIR_IN)) ep0stall(udc); } - break; + return; } - /* Requests handled by gadget */ - default: - if (wLength) { - /* Data phase from gadget, status phase from udc */ - udc->ep0_dir = (setup->bRequestType & USB_DIR_IN) - ? USB_DIR_IN : USB_DIR_OUT; - spin_unlock(&udc->lock); - if (udc->driver->setup(&udc->gadget, - &udc->local_setup_buff) < 0) - ep0stall(udc); - spin_lock(&udc->lock); - udc->ep0_state = (setup->bRequestType & USB_DIR_IN) - ? DATA_STATE_XMIT : DATA_STATE_RECV; - } else { - /* No data phase, IN status from gadget */ - udc->ep0_dir = USB_DIR_IN; - spin_unlock(&udc->lock); - if (udc->driver->setup(&udc->gadget, - &udc->local_setup_buff) < 0) - ep0stall(udc); - spin_lock(&udc->lock); - udc->ep0_state = WAIT_FOR_OUT_STATUS; - } + default: break; } + + /* Requests handled by gadget */ + if (wLength) { + /* Data phase from gadget, status phase from udc */ + udc->ep0_dir = (setup->bRequestType & USB_DIR_IN) + ? USB_DIR_IN : USB_DIR_OUT; + spin_unlock(&udc->lock); + if (udc->driver->setup(&udc->gadget, + &udc->local_setup_buff) < 0) + ep0stall(udc); + spin_lock(&udc->lock); + udc->ep0_state = (setup->bRequestType & USB_DIR_IN) + ? DATA_STATE_XMIT : DATA_STATE_RECV; + } else { + /* No data phase, IN status from gadget */ + udc->ep0_dir = USB_DIR_IN; + spin_unlock(&udc->lock); + if (udc->driver->setup(&udc->gadget, + &udc->local_setup_buff) < 0) + ep0stall(udc); + spin_lock(&udc->lock); + udc->ep0_state = WAIT_FOR_OUT_STATUS; + } } /* Process request for Data or Status phase of ep0 -- cgit v1.2.3 From 4c132e77242c130aea81c8fc64d59f573a26bf8d Mon Sep 17 00:00:00 2001 From: Stanislaw Gruszka Date: Mon, 20 Aug 2007 23:20:49 +0200 Subject: UEAGLE: Remove sysfs files on error case Bugfix, remove sysfs files when modem fails to boot. Signed-off-by: Stanislaw Gruszka Signed-off-by: Greg Kroah-Hartman --- drivers/usb/atm/ueagle-atm.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) diff --git a/drivers/usb/atm/ueagle-atm.c b/drivers/usb/atm/ueagle-atm.c index a1a1c9d467e..29807d048b0 100644 --- a/drivers/usb/atm/ueagle-atm.c +++ b/drivers/usb/atm/ueagle-atm.c @@ -1721,9 +1721,12 @@ static int uea_bind(struct usbatm_data *usbatm, struct usb_interface *intf, ret = uea_boot(sc); if (ret < 0) - goto error; + goto error_rm_grp; return 0; + +error_rm_grp: + sysfs_remove_group(&intf->dev.kobj, &attr_grp); error: kfree(sc); return ret; -- cgit v1.2.3 From c907d3b09f7a50023b61ba6ec4e01ccaa543a7ae Mon Sep 17 00:00:00 2001 From: Mike Nuss Date: Mon, 20 Aug 2007 18:21:15 -0700 Subject: USB: make EHCI initialize properly on PPC SOCs Correctly initialize the on-chip EHCI controller on the AMCC PPC440EPx. Fix "USB 0.0" initialization message, and properly put the controller into a known state before starting it. Add "FIXME" comment to the au1xxx bus glue which is doing the same wrong thing here. (Who maintains that, now that AMD sold off Alchemy?) Remove some false copyright attributions which were somehow placed in the au1xxx bus glue then copied into ppc-soc. Signed-off-by: Mike Nuss Signed-off-by: David Brownell Cc: K.Boge Cc: Jordan Crouse Signed-off-by: Stefan Roese Signed-off-by: Greg Kroah-Hartman --- drivers/usb/host/ehci-au1xxx.c | 5 +++-- drivers/usb/host/ehci-ppc-soc.c | 22 ++++++++++++++++++++-- 2 files changed, 23 insertions(+), 4 deletions(-) diff --git a/drivers/usb/host/ehci-au1xxx.c b/drivers/usb/host/ehci-au1xxx.c index 5d1b12aad77..b1d19268cb2 100644 --- a/drivers/usb/host/ehci-au1xxx.c +++ b/drivers/usb/host/ehci-au1xxx.c @@ -1,8 +1,6 @@ /* * EHCI HCD (Host Controller Driver) for USB. * - * (C) Copyright 2000-2004 David Brownell - * * Bus Glue for AMD Alchemy Au1xxx * * Based on "ohci-au1xxx.c" by Matt Porter @@ -196,6 +194,9 @@ static const struct hc_driver ehci_au1xxx_hc_driver = { /* * basic lifecycle operations + * + * FIXME -- ehci_init() doesn't do enough here. + * See ehci-ppc-soc for a complete implementation. */ .reset = ehci_init, .start = ehci_run, diff --git a/drivers/usb/host/ehci-ppc-soc.c b/drivers/usb/host/ehci-ppc-soc.c index c2cedb09ed8..4f99b0eb27b 100644 --- a/drivers/usb/host/ehci-ppc-soc.c +++ b/drivers/usb/host/ehci-ppc-soc.c @@ -6,7 +6,7 @@ * Bus Glue for PPC On-Chip EHCI driver * Tested on AMCC 440EPx * - * Based on "ehci-au12xx.c" by David Brownell + * Based on "ehci-au1xxx.c" by K.Boge * * This file is licenced under the GPL. */ @@ -15,6 +15,24 @@ extern int usb_disabled(void); +/* called during probe() after chip reset completes */ +static int ehci_ppc_soc_setup(struct usb_hcd *hcd) +{ + struct ehci_hcd *ehci = hcd_to_ehci(hcd); + int retval; + + retval = ehci_halt(ehci); + if (retval) + return retval; + + retval = ehci_init(hcd); + if (retval) + return retval; + + ehci->sbrn = 0x20; + return ehci_reset(ehci); +} + /** * usb_ehci_ppc_soc_probe - initialize PPC-SoC-based HCDs * Context: !in_interrupt() @@ -120,7 +138,7 @@ static const struct hc_driver ehci_ppc_soc_hc_driver = { /* * basic lifecycle operations */ - .reset = ehci_init, + .reset = ehci_ppc_soc_setup, .start = ehci_run, .stop = ehci_stop, .shutdown = ehci_shutdown, -- cgit v1.2.3 From a78d702beed61956b26c1b6288da868946642317 Mon Sep 17 00:00:00 2001 From: Paul Walmsley Date: Thu, 16 Aug 2007 16:21:35 -0700 Subject: usb quirks: Add Canon EOS 5D (PC Connection mode) to the autosuspend blacklist Recent versions of the Linux kernel auto-suspend attached USB devices. After this happens to the Canon EOS 5D camera, the camera's interrupt endpoints don't seem to wake back up correctly, causing further use with libgphoto2 to fail with a -114 "OS error in camera communication" error. A similar fix is probably necessary for this camera in PTP mode, which identifies as USB product id 0x3102, but we haven't tested this. As part of our testing process, we tried the USB_QUIRK_RESET_RESUME quirk also, it's not helpful in this case. Signed-off-by: Raj Kumar Signed-off-by: Paul Walmsley Signed-off-by: Greg Kroah-Hartman --- drivers/usb/core/quirks.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/drivers/usb/core/quirks.c b/drivers/usb/core/quirks.c index 655c15d6039..9e467118dc9 100644 --- a/drivers/usb/core/quirks.c +++ b/drivers/usb/core/quirks.c @@ -79,6 +79,9 @@ static const struct usb_device_id usb_quirk_list[] = { /* Alcor multi-card reader */ { USB_DEVICE(0x058f, 0x6366), .driver_info = USB_QUIRK_NO_AUTOSUSPEND }, + /* Canon EOS 5D in PC Connection mode */ + { USB_DEVICE(0x04a9, 0x3101), .driver_info = USB_QUIRK_NO_AUTOSUSPEND }, + /* RIM Blackberry */ { USB_DEVICE(0x0fca, 0x0001), .driver_info = USB_QUIRK_NO_AUTOSUSPEND }, { USB_DEVICE(0x0fca, 0x0004), .driver_info = USB_QUIRK_NO_AUTOSUSPEND }, -- cgit v1.2.3 From 83fc8a151beda2d63e196a7ab2e12316c37a1e91 Mon Sep 17 00:00:00 2001 From: Mike Pagano Date: Wed, 15 Aug 2007 10:13:28 -0400 Subject: USB: resubmission unusual_devs modification for Nikon D80 Upgrade the unusual_devs.h file to support the new 1.01 firmware for the Nikon D80. Signed-off-by: Mike Pagano Signed-off-by: Phil Dibowitz Signed-off-by: Greg Kroah-Hartman --- drivers/usb/storage/unusual_devs.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/usb/storage/unusual_devs.h b/drivers/usb/storage/unusual_devs.h index d8d008d4294..2d92ce31018 100644 --- a/drivers/usb/storage/unusual_devs.h +++ b/drivers/usb/storage/unusual_devs.h @@ -342,7 +342,7 @@ UNUSUAL_DEV( 0x04b0, 0x040d, 0x0100, 0x0100, US_FL_FIX_CAPACITY), /* Reported by Emil Larsson */ -UNUSUAL_DEV( 0x04b0, 0x0411, 0x0100, 0x0100, +UNUSUAL_DEV( 0x04b0, 0x0411, 0x0100, 0x0101, "NIKON", "NIKON DSC D80", US_SC_DEVICE, US_PR_DEVICE, NULL, -- cgit v1.2.3 From d65cc1b45e7d3a24c25fd3d730042e407d6d64ce Mon Sep 17 00:00:00 2001 From: Kay Sievers Date: Tue, 21 Aug 2007 13:41:08 +0200 Subject: usb: add PRODUCT, TYPE to usb-interface events This fixes a regression for userspace programs that were relying on these events. Signed-off-by: Kay Sievers Cc: Andreas Jellinghaus Cc: stable Signed-off-by: Greg Kroah-Hartman --- drivers/usb/core/message.c | 24 ++++++++++++++++++++++++ 1 file changed, 24 insertions(+) diff --git a/drivers/usb/core/message.c b/drivers/usb/core/message.c index 5498506e9c5..d8f7b089a8f 100644 --- a/drivers/usb/core/message.c +++ b/drivers/usb/core/message.c @@ -1358,6 +1358,30 @@ static int usb_if_uevent(struct device *dev, char **envp, int num_envp, usb_dev = interface_to_usbdev(intf); alt = intf->cur_altsetting; +#ifdef CONFIG_USB_DEVICEFS + if (add_uevent_var(envp, num_envp, &i, + buffer, buffer_size, &length, + "DEVICE=/proc/bus/usb/%03d/%03d", + usb_dev->bus->busnum, usb_dev->devnum)) + return -ENOMEM; +#endif + + if (add_uevent_var(envp, num_envp, &i, + buffer, buffer_size, &length, + "PRODUCT=%x/%x/%x", + le16_to_cpu(usb_dev->descriptor.idVendor), + le16_to_cpu(usb_dev->descriptor.idProduct), + le16_to_cpu(usb_dev->descriptor.bcdDevice))) + return -ENOMEM; + + if (add_uevent_var(envp, num_envp, &i, + buffer, buffer_size, &length, + "TYPE=%d/%d/%d", + usb_dev->descriptor.bDeviceClass, + usb_dev->descriptor.bDeviceSubClass, + usb_dev->descriptor.bDeviceProtocol)) + return -ENOMEM; + if (add_uevent_var(envp, num_envp, &i, buffer, buffer_size, &length, "INTERFACE=%d/%d/%d", -- cgit v1.2.3