From d861f7bf14808b9f457cb32c34585e97df60f140 Mon Sep 17 00:00:00 2001 From: Marek Vasut Date: Mon, 10 May 2010 15:35:11 -0700 Subject: Input: iforce - add Guillemot Jet Leader Force Feedback This device features a RUDDER on the knob. Signed-off-by: Marek Vasut Signed-off-by: Dmitry Torokhov --- drivers/input/joystick/iforce/iforce-main.c | 4 ++++ drivers/input/joystick/iforce/iforce-usb.c | 1 + 2 files changed, 5 insertions(+) diff --git a/drivers/input/joystick/iforce/iforce-main.c b/drivers/input/joystick/iforce/iforce-main.c index b1edd778639..5956d89b1d3 100644 --- a/drivers/input/joystick/iforce/iforce-main.c +++ b/drivers/input/joystick/iforce/iforce-main.c @@ -54,6 +54,9 @@ static signed short btn_avb_wheel[] = static signed short abs_joystick[] = { ABS_X, ABS_Y, ABS_THROTTLE, ABS_HAT0X, ABS_HAT0Y, -1 }; +static signed short abs_joystick_rudder[] = +{ ABS_X, ABS_Y, ABS_THROTTLE, ABS_RUDDER, ABS_HAT0X, ABS_HAT0Y, -1 }; + static signed short abs_avb_pegasus[] = { ABS_X, ABS_Y, ABS_THROTTLE, ABS_RUDDER, ABS_HAT0X, ABS_HAT0Y, ABS_HAT1X, ABS_HAT1Y, -1 }; @@ -76,6 +79,7 @@ static struct iforce_device iforce_device[] = { { 0x061c, 0xc0a4, "ACT LABS Force RS", btn_wheel, abs_wheel, ff_iforce }, //? { 0x061c, 0xc084, "ACT LABS Force RS", btn_wheel, abs_wheel, ff_iforce }, { 0x06f8, 0x0001, "Guillemot Race Leader Force Feedback", btn_wheel, abs_wheel, ff_iforce }, //? + { 0x06f8, 0x0001, "Guillemot Jet Leader Force Feedback", btn_joystick, abs_joystick_rudder, ff_iforce }, { 0x06f8, 0x0004, "Guillemot Force Feedback Racing Wheel", btn_wheel, abs_wheel, ff_iforce }, //? { 0x06f8, 0x0004, "Gullemot Jet Leader 3D", btn_joystick, abs_joystick, ff_iforce }, //? { 0x06d6, 0x29bc, "Trust Force Feedback Race Master", btn_wheel, abs_wheel, ff_iforce }, diff --git a/drivers/input/joystick/iforce/iforce-usb.c b/drivers/input/joystick/iforce/iforce-usb.c index b41303d3ec5..6c96631ae5d 100644 --- a/drivers/input/joystick/iforce/iforce-usb.c +++ b/drivers/input/joystick/iforce/iforce-usb.c @@ -212,6 +212,7 @@ static struct usb_device_id iforce_usb_ids [] = { { USB_DEVICE(0x061c, 0xc0a4) }, /* ACT LABS Force RS */ { USB_DEVICE(0x061c, 0xc084) }, /* ACT LABS Force RS */ { USB_DEVICE(0x06f8, 0x0001) }, /* Guillemot Race Leader Force Feedback */ + { USB_DEVICE(0x06f8, 0x0003) }, /* Guillemot Jet Leader Force Feedback */ { USB_DEVICE(0x06f8, 0x0004) }, /* Guillemot Force Feedback Racing Wheel */ { USB_DEVICE(0x06f8, 0xa302) }, /* Guillemot Jet Leader 3D */ { } /* Terminating entry */ -- cgit v1.2.3 From 513d8be9883fe0a7a73d216c7cecd20e7c9effda Mon Sep 17 00:00:00 2001 From: Marek Vasut Date: Mon, 10 May 2010 15:35:11 -0700 Subject: Input: iforce - fix Guillemot Jet Leader 3D entry USB ID entry for "Guillemot Jet Leader 3D" in iforce-main.c did not match one used in iforce-usb.c Signed-off-by: Marek Vasut Signed-off-by: Dmitry Torokhov --- drivers/input/joystick/iforce/iforce-main.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/input/joystick/iforce/iforce-main.c b/drivers/input/joystick/iforce/iforce-main.c index 5956d89b1d3..405febd94f2 100644 --- a/drivers/input/joystick/iforce/iforce-main.c +++ b/drivers/input/joystick/iforce/iforce-main.c @@ -81,7 +81,7 @@ static struct iforce_device iforce_device[] = { { 0x06f8, 0x0001, "Guillemot Race Leader Force Feedback", btn_wheel, abs_wheel, ff_iforce }, //? { 0x06f8, 0x0001, "Guillemot Jet Leader Force Feedback", btn_joystick, abs_joystick_rudder, ff_iforce }, { 0x06f8, 0x0004, "Guillemot Force Feedback Racing Wheel", btn_wheel, abs_wheel, ff_iforce }, //? - { 0x06f8, 0x0004, "Gullemot Jet Leader 3D", btn_joystick, abs_joystick, ff_iforce }, //? + { 0x06f8, 0xa302, "Guillemot Jet Leader 3D", btn_joystick, abs_joystick, ff_iforce }, //? { 0x06d6, 0x29bc, "Trust Force Feedback Race Master", btn_wheel, abs_wheel, ff_iforce }, { 0x0000, 0x0000, "Unknown I-Force Device [%04x:%04x]", btn_joystick, abs_joystick, ff_iforce } }; -- cgit v1.2.3 From 504e8beed161bd11a2c6cbb8aaf352c14d39b5bb Mon Sep 17 00:00:00 2001 From: Dmitry Torokhov Date: Thu, 13 May 2010 00:41:15 -0700 Subject: Input: elantech - use all 3 bytes when checking version Apparently all 3 bytes returned by ETP_FW_VERSION_QUERY are significant and should be taken into account when matching hardware version/features. Tested-by: Eric Piel Signed-off-by: Dmitry Torokhov --- drivers/input/mouse/elantech.c | 24 ++++++++++++------------ drivers/input/mouse/elantech.h | 5 ++--- 2 files changed, 14 insertions(+), 15 deletions(-) diff --git a/drivers/input/mouse/elantech.c b/drivers/input/mouse/elantech.c index 2cbf3fc4729..1ac12f7c872 100644 --- a/drivers/input/mouse/elantech.c +++ b/drivers/input/mouse/elantech.c @@ -184,7 +184,7 @@ static void elantech_report_absolute_v1(struct psmouse *psmouse) int fingers; static int old_fingers; - if (etd->fw_version_maj == 0x01) { + if (etd->fw_version < 0x020000) { /* * byte 0: D U p1 p2 1 p3 R L * byte 1: f 0 th tw x9 x8 y9 y8 @@ -226,7 +226,7 @@ static void elantech_report_absolute_v1(struct psmouse *psmouse) input_report_key(dev, BTN_LEFT, packet[0] & 0x01); input_report_key(dev, BTN_RIGHT, packet[0] & 0x02); - if ((etd->fw_version_maj == 0x01) && + if (etd->fw_version < 0x020000 && (etd->capabilities & ETP_CAP_HAS_ROCKER)) { /* rocker up */ input_report_key(dev, BTN_FORWARD, packet[0] & 0x40); @@ -320,7 +320,7 @@ static int elantech_check_parity_v1(struct psmouse *psmouse) unsigned char p1, p2, p3; /* Parity bits are placed differently */ - if (etd->fw_version_maj == 0x01) { + if (etd->fw_version < 0x020000) { /* byte 0: D U p1 p2 1 p3 R L */ p1 = (packet[0] & 0x20) >> 5; p2 = (packet[0] & 0x10) >> 4; @@ -456,7 +456,7 @@ static void elantech_set_input_params(struct psmouse *psmouse) switch (etd->hw_version) { case 1: /* Rocker button */ - if ((etd->fw_version_maj == 0x01) && + if (etd->fw_version < 0x020000 && (etd->capabilities & ETP_CAP_HAS_ROCKER)) { __set_bit(BTN_FORWARD, dev->keybit); __set_bit(BTN_BACK, dev->keybit); @@ -685,15 +685,14 @@ int elantech_init(struct psmouse *psmouse) pr_err("elantech.c: failed to query firmware version.\n"); goto init_fail; } - etd->fw_version_maj = param[0]; - etd->fw_version_min = param[2]; + + etd->fw_version = (param[0] << 16) | (param[1] << 8) | param[2]; /* * Assume every version greater than this is new EeePC style * hardware with 6 byte packets */ - if ((etd->fw_version_maj == 0x02 && etd->fw_version_min >= 0x30) || - etd->fw_version_maj > 0x02) { + if (etd->fw_version >= 0x020030) { etd->hw_version = 2; /* For now show extra debug information */ etd->debug = 1; @@ -703,8 +702,9 @@ int elantech_init(struct psmouse *psmouse) etd->hw_version = 1; etd->paritycheck = 1; } - pr_info("elantech.c: assuming hardware version %d, firmware version %d.%d\n", - etd->hw_version, etd->fw_version_maj, etd->fw_version_min); + + pr_info("elantech.c: assuming hardware version %d, firmware version %d.%d.%d\n", + etd->hw_version, param[0], param[1], param[2]); if (synaptics_send_cmd(psmouse, ETP_CAPABILITIES_QUERY, param)) { pr_err("elantech.c: failed to query capabilities.\n"); @@ -719,8 +719,8 @@ int elantech_init(struct psmouse *psmouse) * a touch action starts causing the mouse cursor or scrolled page * to jump. Enable a workaround. */ - if (etd->fw_version_maj == 0x02 && etd->fw_version_min == 0x22) { - pr_info("elantech.c: firmware version 2.34 detected, " + if (etd->fw_version == 0x020022) { + pr_info("elantech.c: firmware version 2.0.34 detected, " "enabling jumpy cursor workaround\n"); etd->jumpy_cursor = 1; } diff --git a/drivers/input/mouse/elantech.h b/drivers/input/mouse/elantech.h index feac5f7af96..ac57bde1bb9 100644 --- a/drivers/input/mouse/elantech.h +++ b/drivers/input/mouse/elantech.h @@ -100,11 +100,10 @@ struct elantech_data { unsigned char reg_26; unsigned char debug; unsigned char capabilities; - unsigned char fw_version_maj; - unsigned char fw_version_min; - unsigned char hw_version; unsigned char paritycheck; unsigned char jumpy_cursor; + unsigned char hw_version; + unsigned int fw_version; unsigned char parity[256]; }; -- cgit v1.2.3 From ef110b24e28f36620f63dab94708a17c7e267358 Mon Sep 17 00:00:00 2001 From: Dmitry Torokhov Date: Thu, 13 May 2010 00:42:23 -0700 Subject: Input: psmouse - reset all types of mice before reconnecting Synaptics hardware requires resetting device after suspend to ram in order for the device to be operational. The reset lives in synaptics-specific reconnect handler, but it is not being invoked if synaptics support is disabled and the device is handled as a standard PS/2 device (bare or IntelliMouse protocol). Let's add reset into generic reconnect handler as well. Signed-off-by: Dmitry Torokhov --- drivers/input/mouse/psmouse-base.c | 14 ++++++++++---- 1 file changed, 10 insertions(+), 4 deletions(-) diff --git a/drivers/input/mouse/psmouse-base.c b/drivers/input/mouse/psmouse-base.c index cbc80726494..a3c97315a47 100644 --- a/drivers/input/mouse/psmouse-base.c +++ b/drivers/input/mouse/psmouse-base.c @@ -1394,6 +1394,7 @@ static int psmouse_reconnect(struct serio *serio) struct psmouse *psmouse = serio_get_drvdata(serio); struct psmouse *parent = NULL; struct serio_driver *drv = serio->drv; + unsigned char type; int rc = -1; if (!drv || !psmouse) { @@ -1413,10 +1414,15 @@ static int psmouse_reconnect(struct serio *serio) if (psmouse->reconnect) { if (psmouse->reconnect(psmouse)) goto out; - } else if (psmouse_probe(psmouse) < 0 || - psmouse->type != psmouse_extensions(psmouse, - psmouse_max_proto, false)) { - goto out; + } else { + psmouse_reset(psmouse); + + if (psmouse_probe(psmouse) < 0) + goto out; + + type = psmouse_extensions(psmouse, psmouse_max_proto, false); + if (psmouse->type != type) + goto out; } /* ok, the device type (and capabilities) match the old one, -- cgit v1.2.3 From 3843384a055496dfed3c93ae883d964d8290fdab Mon Sep 17 00:00:00 2001 From: Oskar Schirmer Date: Thu, 13 May 2010 00:42:23 -0700 Subject: Input: ad7877 - keep dma rx buffers in seperate cache lines MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit With dma based spi transmission, data corruption is observed occasionally. With dma buffers located right next to msg and xfer fields, cache lines correctly flushed in preparation for dma usage may be polluted again when writing to fields in the same cache line. Make sure cache fields used with dma do not share cache lines with fields changed during dma handling. As both fields are part of a struct that is allocated via kzalloc, thus cache aligned, moving the fields to the 1st position and insert padding for alignment does the job. Signed-off-by: Oskar Schirmer Signed-off-by: Daniel Glöckner Signed-off-by: Oliver Schneidewind Signed-off-by: Johannes Weiner Acked-by: Mike Frysinger [dtor@mail.ru - changed to use ___cacheline_aligned as suggested by akpm] Signed-off-by: Dmitry Torokhov --- drivers/input/touchscreen/ad7877.c | 15 ++++++++++++--- 1 file changed, 12 insertions(+), 3 deletions(-) diff --git a/drivers/input/touchscreen/ad7877.c b/drivers/input/touchscreen/ad7877.c index e019d53d1ab..0d2d7e54b46 100644 --- a/drivers/input/touchscreen/ad7877.c +++ b/drivers/input/touchscreen/ad7877.c @@ -156,9 +156,14 @@ struct ser_req { u16 reset; u16 ref_on; u16 command; - u16 sample; struct spi_message msg; struct spi_transfer xfer[6]; + + /* + * DMA (thus cache coherency maintenance) requires the + * transfer buffers to live in their own cache lines. + */ + u16 sample ____cacheline_aligned; }; struct ad7877 { @@ -182,8 +187,6 @@ struct ad7877 { u8 averaging; u8 pen_down_acc_interval; - u16 conversion_data[AD7877_NR_SENSE]; - struct spi_transfer xfer[AD7877_NR_SENSE + 2]; struct spi_message msg; @@ -195,6 +198,12 @@ struct ad7877 { spinlock_t lock; struct timer_list timer; /* P: lock */ unsigned pending:1; /* P: lock */ + + /* + * DMA (thus cache coherency maintenance) requires the + * transfer buffers to live in their own cache lines. + */ + u16 conversion_data[AD7877_NR_SENSE] ____cacheline_aligned; }; static int gpio3; -- cgit v1.2.3