From 20faa7c380c19c932d57be59bb2522bd9327a6c5 Mon Sep 17 00:00:00 2001 From: Adrian Bunk Date: Sat, 5 Nov 2005 10:20:56 +0000 Subject: [ARM] Documentation/arm/README: small update - egcs is not supported by kernel 2.6 - gcc 3.3 seems to be a good choice on ARM Signed-off-by: Adrian Bunk Signed-off-by: Russell King --- Documentation/arm/README | 7 +++---- 1 file changed, 3 insertions(+), 4 deletions(-) diff --git a/Documentation/arm/README b/Documentation/arm/README index a6f718e90a8..5ed6f3530b8 100644 --- a/Documentation/arm/README +++ b/Documentation/arm/README @@ -8,10 +8,9 @@ Compilation of kernel --------------------- In order to compile ARM Linux, you will need a compiler capable of - generating ARM ELF code with GNU extensions. GCC 2.95.1, EGCS - 1.1.2, and GCC 3.3 are known to be good compilers. Fortunately, you - needn't guess. The kernel will report an error if your compiler is - a recognized offender. + generating ARM ELF code with GNU extensions. GCC 3.3 is known to be + a good compiler. Fortunately, you needn't guess. The kernel will report + an error if your compiler is a recognized offender. To build ARM Linux natively, you shouldn't have to alter the ARCH = line in the top level Makefile. However, if you don't have the ARM Linux ELF -- cgit v1.2.3 From 8459c159f7de832eaf888398d2abf466c388dfa6 Mon Sep 17 00:00:00 2001 From: Dirk Opfer Date: Sun, 6 Nov 2005 14:27:52 +0000 Subject: [ARM] 3088/1: PXA: Add machine support for the Sharp SL-6000x series of PDAs Patch from Dirk Opfer This patch adds basic machine support for the Sharp SL-6000x (Tosa) PDAs. Signed-off-by: Dirk Opfer Signed-off-by: Richard Purdie Signed-off-by: Russell King --- MAINTAINERS | 5 ++ arch/arm/mach-pxa/Kconfig | 9 ++- arch/arm/mach-pxa/Makefile | 1 + arch/arm/mach-pxa/tosa.c | 162 +++++++++++++++++++++++++++++++++++++++ include/asm-arm/arch-pxa/tosa.h | 166 ++++++++++++++++++++++++++++++++++++++++ 5 files changed, 341 insertions(+), 2 deletions(-) create mode 100644 arch/arm/mach-pxa/tosa.c create mode 100644 include/asm-arm/arch-pxa/tosa.h diff --git a/MAINTAINERS b/MAINTAINERS index 983f9e9aed6..23337f88c50 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -297,6 +297,11 @@ P: Richard Purdie M: rpurdie@rpsys.net S: Maintained +ARM/TOSA MACHINE SUPPORT +P: Dirk Opfer +M: dirk@opfer-online.de +S: Maintained + ARM/PLEB SUPPORT P: Peter Chubb M: pleb@gelato.unsw.edu.au diff --git a/arch/arm/mach-pxa/Kconfig b/arch/arm/mach-pxa/Kconfig index 3e5f69bb5ac..b380a438e68 100644 --- a/arch/arm/mach-pxa/Kconfig +++ b/arch/arm/mach-pxa/Kconfig @@ -27,7 +27,8 @@ config PXA_SHARPSL Say Y here if you intend to run this kernel on a Sharp Zaurus SL-5600 (Poodle), SL-C700 (Corgi), SL-C750 (Shepherd), SL-C760 (Husky), SL-C1000 (Akita), - SL-C3000 (Spitz) or SL-C3100 (Borzoi) handheld computer. + SL-C3000 (Spitz), SL-C3100 (Borzoi) or SL-C6000x (Tosa) + handheld computer. endchoice @@ -37,7 +38,7 @@ choice prompt "Select target Sharp Zaurus device range" config PXA_SHARPSL_25x - bool "Sharp PXA25x models (SL-5600 and SL-C7xx)" + bool "Sharp PXA25x models (SL-5600, SL-C7xx and SL-C6000x)" select PXA25x config PXA_SHARPSL_27x @@ -80,6 +81,10 @@ config MACH_BORZOI depends PXA_SHARPSL_27x select PXA_SHARP_Cxx00 +config MACH_TOSA + bool "Enable Sharp SL-6000x (Tosa) Support" + depends PXA_SHARPSL + config PXA25x bool help diff --git a/arch/arm/mach-pxa/Makefile b/arch/arm/mach-pxa/Makefile index f609a0f232c..8bc72d07cea 100644 --- a/arch/arm/mach-pxa/Makefile +++ b/arch/arm/mach-pxa/Makefile @@ -14,6 +14,7 @@ obj-$(CONFIG_ARCH_PXA_IDP) += idp.o obj-$(CONFIG_PXA_SHARP_C7xx) += corgi.o corgi_ssp.o corgi_lcd.o ssp.o obj-$(CONFIG_PXA_SHARP_Cxx00) += spitz.o corgi_ssp.o corgi_lcd.o ssp.o obj-$(CONFIG_MACH_POODLE) += poodle.o +obj-$(CONFIG_MACH_TOSA) += tosa.o # Support for blinky lights led-y := leds.o diff --git a/arch/arm/mach-pxa/tosa.c b/arch/arm/mach-pxa/tosa.c new file mode 100644 index 00000000000..400609f8b6a --- /dev/null +++ b/arch/arm/mach-pxa/tosa.c @@ -0,0 +1,162 @@ +/* + * Support for Sharp SL-C6000x PDAs + * Model: (Tosa) + * + * Copyright (c) 2005 Dirk Opfer + * + * Based on code written by Sharp/Lineo for 2.4 kernels + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + */ + +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include + +#include +#include +#include + +#include +#include + +#include "generic.h" + + +/* + * SCOOP Device + */ +static struct resource tosa_scoop_resources[] = { + [0] = { + .start = TOSA_CF_PHYS, + .end = TOSA_CF_PHYS + 0xfff, + .flags = IORESOURCE_MEM, + }, +}; + +static struct scoop_config tosa_scoop_setup = { + .io_dir = TOSA_SCOOP_IO_DIR, + .io_out = TOSA_SCOOP_IO_OUT, + +}; + +struct platform_device tosascoop_device = { + .name = "sharp-scoop", + .id = 0, + .dev = { + .platform_data = &tosa_scoop_setup, + }, + .num_resources = ARRAY_SIZE(tosa_scoop_resources), + .resource = tosa_scoop_resources, +}; + + +/* + * SCOOP Device Jacket + */ +static struct resource tosa_scoop_jc_resources[] = { + [0] = { + .start = TOSA_SCOOP_PHYS + 0x40, + .end = TOSA_SCOOP_PHYS + 0xfff, + .flags = IORESOURCE_MEM, + }, +}; + +static struct scoop_config tosa_scoop_jc_setup = { + .io_dir = TOSA_SCOOP_JC_IO_DIR, + .io_out = TOSA_SCOOP_JC_IO_OUT, +}; + +struct platform_device tosascoop_jc_device = { + .name = "sharp-scoop", + .id = 1, + .dev = { + .platform_data = &tosa_scoop_jc_setup, + .parent = &tosascoop_device.dev, + }, + .num_resources = ARRAY_SIZE(tosa_scoop_jc_resources), + .resource = tosa_scoop_jc_resources, +}; + +static struct scoop_pcmcia_dev tosa_pcmcia_scoop[] = { +{ + .dev = &tosascoop_device.dev, + .irq = TOSA_IRQ_GPIO_CF_IRQ, + .cd_irq = TOSA_IRQ_GPIO_CF_CD, + .cd_irq_str = "PCMCIA0 CD", +},{ + .dev = &tosascoop_jc_device.dev, + .irq = TOSA_IRQ_GPIO_JC_CF_IRQ, + .cd_irq = -1, +}, +}; + + +static struct platform_device *devices[] __initdata = { + &tosascoop_device, + &tosascoop_jc_device, +}; + +static void __init tosa_init(void) +{ + pxa_gpio_mode(TOSA_GPIO_ON_RESET | GPIO_IN); + pxa_gpio_mode(TOSA_GPIO_TC6393_INT | GPIO_IN); + + /* setup sleep mode values */ + PWER = 0x00000002; + PFER = 0x00000000; + PRER = 0x00000002; + PGSR0 = 0x00000000; + PGSR1 = 0x00FF0002; + PGSR2 = 0x00014000; + PCFR |= PCFR_OPDE; + + // enable batt_fault + PMCR = 0x01; + + platform_add_devices(devices, ARRAY_SIZE(devices)); + + scoop_num = 2; + scoop_devs = &tosa_pcmcia_scoop[0]; +} + +static void __init fixup_tosa(struct machine_desc *desc, + struct tag *tags, char **cmdline, struct meminfo *mi) +{ + sharpsl_save_param(); + mi->nr_banks=1; + mi->bank[0].start = 0xa0000000; + mi->bank[0].node = 0; + mi->bank[0].size = (64*1024*1024); +} + +MACHINE_START(TOSA, "SHARP Tosa") + .phys_ram = 0xa0000000, + .phys_io = 0x40000000, + .io_pg_offst = (io_p2v(0x40000000) >> 18) & 0xfffc, + .fixup = fixup_tosa, + .map_io = pxa_map_io, + .init_irq = pxa_init_irq, + .init_machine = tosa_init, + .timer = &pxa_timer, +MACHINE_END diff --git a/include/asm-arm/arch-pxa/tosa.h b/include/asm-arm/arch-pxa/tosa.h new file mode 100644 index 00000000000..c3364a2c475 --- /dev/null +++ b/include/asm-arm/arch-pxa/tosa.h @@ -0,0 +1,166 @@ +/* + * Hardware specific definitions for Sharp SL-C6000x series of PDAs + * + * Copyright (c) 2005 Dirk Opfer + * + * Based on Sharp's 2.4 kernel patches + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + */ +#ifndef _ASM_ARCH_TOSA_H_ +#define _ASM_ARCH_TOSA_H_ 1 + +/* TOSA Chip selects */ +#define TOSA_LCDC_PHYS PXA_CS4_PHYS +/* Internel Scoop */ +#define TOSA_CF_PHYS (PXA_CS2_PHYS + 0x00800000) +/* Jacket Scoop */ +#define TOSA_SCOOP_PHYS (PXA_CS5_PHYS + 0x00800000) + +/* + * SCOOP2 internal GPIOs + */ +#define TOSA_SCOOP_PXA_VCORE1 SCOOP_GPCR_PA11 +#define TOSA_SCOOP_TC6393_REST_IN SCOOP_GPCR_PA12 +#define TOSA_SCOOP_IR_POWERDWN SCOOP_GPCR_PA13 +#define TOSA_SCOOP_SD_WP SCOOP_GPCR_PA14 +#define TOSA_SCOOP_PWR_ON SCOOP_GPCR_PA15 +#define TOSA_SCOOP_AUD_PWR_ON SCOOP_GPCR_PA16 +#define TOSA_SCOOP_BT_RESET SCOOP_GPCR_PA17 +#define TOSA_SCOOP_BT_PWR_EN SCOOP_GPCR_PA18 +#define TOSA_SCOOP_AC_IN_OL SCOOP_GPCR_PA19 + +/* GPIO Direction 1 : output mode / 0:input mode */ +#define TOSA_SCOOP_IO_DIR ( TOSA_SCOOP_PXA_VCORE1 | TOSA_SCOOP_TC6393_REST_IN | \ + TOSA_SCOOP_IR_POWERDWN | TOSA_SCOOP_PWR_ON | TOSA_SCOOP_AUD_PWR_ON |\ + TOSA_SCOOP_BT_RESET | TOSA_SCOOP_BT_PWR_EN ) +/* GPIO out put level when init 1: Hi */ +#define TOSA_SCOOP_IO_OUT ( TOSA_SCOOP_TC6393_REST_IN ) + +/* + * SCOOP2 jacket GPIOs + */ +#define TOSA_SCOOP_JC_BT_LED SCOOP_GPCR_PA11 +#define TOSA_SCOOP_JC_NOTE_LED SCOOP_GPCR_PA12 +#define TOSA_SCOOP_JC_CHRG_ERR_LED SCOOP_GPCR_PA13 +#define TOSA_SCOOP_JC_USB_PULLUP SCOOP_GPCR_PA14 +#define TOSA_SCOOP_JC_TC6393_SUSPEND SCOOP_GPCR_PA15 +#define TOSA_SCOOP_JC_TC3693_L3V_ON SCOOP_GPCR_PA16 +#define TOSA_SCOOP_JC_WLAN_DETECT SCOOP_GPCR_PA17 +#define TOSA_SCOOP_JC_WLAN_LED SCOOP_GPCR_PA18 +#define TOSA_SCOOP_JC_CARD_LIMIT_SEL SCOOP_GPCR_PA19 + +/* GPIO Direction 1 : output mode / 0:input mode */ +#define TOSA_SCOOP_JC_IO_DIR ( TOSA_SCOOP_JC_BT_LED | TOSA_SCOOP_JC_NOTE_LED | \ + TOSA_SCOOP_JC_CHRG_ERR_LED | TOSA_SCOOP_JC_USB_PULLUP | \ + TOSA_SCOOP_JC_TC6393_SUSPEND | TOSA_SCOOP_JC_TC3693_L3V_ON | \ + TOSA_SCOOP_JC_WLAN_LED | TOSA_SCOOP_JC_CARD_LIMIT_SEL ) +/* GPIO out put level when init 1: Hi */ +#define TOSA_SCOOP_JC_IO_OUT ( 0 ) + +/* + * Timing Generator + */ +#define TG_PNLCTL 0x00 +#define TG_TPOSCTL 0x01 +#define TG_DUTYCTL 0x02 +#define TG_GPOSR 0x03 +#define TG_GPODR1 0x04 +#define TG_GPODR2 0x05 +#define TG_PINICTL 0x06 +#define TG_HPOSCTL 0x07 + +/* + * LED + */ +#define TOSA_SCOOP_LED_BLUE TOSA_SCOOP_GPCR_PA11 +#define TOSA_SCOOP_LED_GREEN TOSA_SCOOP_GPCR_PA12 +#define TOSA_SCOOP_LED_ORANGE TOSA_SCOOP_GPCR_PA13 +#define TOSA_SCOOP_LED_WLAN TOSA_SCOOP_GPCR_PA18 + + +/* + * PXA GPIOs + */ +#define TOSA_GPIO_POWERON (0) +#define TOSA_GPIO_RESET (1) +#define TOSA_GPIO_AC_IN (2) +#define TOSA_GPIO_RECORD_BTN (3) +#define TOSA_GPIO_SYNC (4) /* Cradle SYNC Button */ +#define TOSA_GPIO_USB_IN (5) +#define TOSA_GPIO_JACKET_DETECT (7) +#define TOSA_GPIO_nSD_DETECT (9) +#define TOSA_GPIO_nSD_INT (10) +#define TOSA_GPIO_TC6393_CLK (11) +#define TOSA_GPIO_BAT1_CRG (12) +#define TOSA_GPIO_CF_CD (13) +#define TOSA_GPIO_BAT0_CRG (14) +#define TOSA_GPIO_TC6393_INT (15) +#define TOSA_GPIO_BAT0_LOW (17) +#define TOSA_GPIO_TC6393_RDY (18) +#define TOSA_GPIO_ON_RESET (19) +#define TOSA_GPIO_EAR_IN (20) +#define TOSA_GPIO_CF_IRQ (21) /* CF slot0 Ready */ +#define TOSA_GPIO_ON_KEY (22) +#define TOSA_GPIO_VGA_LINE (27) +#define TOSA_GPIO_TP_INT (32) /* Touch Panel pen down interrupt */ +#define TOSA_GPIO_JC_CF_IRQ (36) /* CF slot1 Ready */ +#define TOSA_GPIO_BAT_LOCKED (38) /* Battery locked */ +#define TOSA_GPIO_TG_SPI_SCLK (81) +#define TOSA_GPIO_TG_SPI_CS (82) +#define TOSA_GPIO_TG_SPI_MOSI (83) +#define TOSA_GPIO_BAT1_LOW (84) + +#define TOSA_GPIO_HP_IN GPIO_EAR_IN + +#define TOSA_GPIO_MAIN_BAT_LOW GPIO_BAT0_LOW + +#define TOSA_KEY_STROBE_NUM (11) +#define TOSA_KEY_SENSE_NUM (7) + +#define TOSA_GPIO_HIGH_STROBE_BIT (0xfc000000) +#define TOSA_GPIO_LOW_STROBE_BIT (0x0000001f) +#define TOSA_GPIO_ALL_SENSE_BIT (0x00000fe0) +#define TOSA_GPIO_ALL_SENSE_RSHIFT (5) +#define TOSA_GPIO_STROBE_BIT(a) GPIO_bit(58+(a)) +#define TOSA_GPIO_SENSE_BIT(a) GPIO_bit(69+(a)) +#define TOSA_GAFR_HIGH_STROBE_BIT (0xfff00000) +#define TOSA_GAFR_LOW_STROBE_BIT (0x000003ff) +#define TOSA_GAFR_ALL_SENSE_BIT (0x00fffc00) +#define TOSA_GPIO_KEY_SENSE(a) (69+(a)) +#define TOSA_GPIO_KEY_STROBE(a) (58+(a)) + +/* + * Interrupts + */ +#define TOSA_IRQ_GPIO_WAKEUP IRQ_GPIO(TOSA_GPIO_WAKEUP) +#define TOSA_IRQ_GPIO_AC_IN IRQ_GPIO(TOSA_GPIO_AC_IN) +#define TOSA_IRQ_GPIO_RECORD_BTN IRQ_GPIO(TOSA_GPIO_RECORD_BTN) +#define TOSA_IRQ_GPIO_SYNC IRQ_GPIO(TOSA_GPIO_SYNC) +#define TOSA_IRQ_GPIO_USB_IN IRQ_GPIO(TOSA_GPIO_USB_IN) +#define TOSA_IRQ_GPIO_JACKET_DETECT IRQ_GPIO(TOSA_GPIO_JACKET_DETECT) +#define TOSA_IRQ_GPIO_nSD_INT IRQ_GPIO(TOSA_GPIO_nSD_INT) +#define TOSA_IRQ_GPIO_nSD_DETECT IRQ_GPIO(TOSA_GPIO_nSD_DETECT) +#define TOSA_IRQ_GPIO_BAT1_CRG IRQ_GPIO(TOSA_GPIO_BAT1_CRG) +#define TOSA_IRQ_GPIO_CF_CD IRQ_GPIO(TOSA_GPIO_CF_CD) +#define TOSA_IRQ_GPIO_BAT0_CRG IRQ_GPIO(TOSA_GPIO_BAT0_CRG) +#define TOSA_IRQ_GPIO_TC6393_INT IRQ_GPIO(TOSA_GPIO_TC6393_INT) +#define TOSA_IRQ_GPIO_BAT0_LOW IRQ_GPIO(TOSA_GPIO_BAT0_LOW) +#define TOSA_IRQ_GPIO_EAR_IN IRQ_GPIO(TOSA_GPIO_EAR_IN) +#define TOSA_IRQ_GPIO_CF_IRQ IRQ_GPIO(TOSA_GPIO_CF_IRQ) +#define TOSA_IRQ_GPIO_ON_KEY IRQ_GPIO(TOSA_GPIO_ON_KEY) +#define TOSA_IRQ_GPIO_VGA_LINE IRQ_GPIO(TOSA_GPIO_VGA_LINE) +#define TOSA_IRQ_GPIO_TP_INT IRQ_GPIO(TOSA_GPIO_TP_INT) +#define TOSA_IRQ_GPIO_JC_CF_IRQ IRQ_GPIO(TOSA_GPIO_JC_CF_IRQ) +#define TOSA_IRQ_GPIO_BAT_LOCKED IRQ_GPIO(TOSA_GPIO_BAT_LOCKED) +#define TOSA_IRQ_GPIO_BAT1_LOW IRQ_GPIO(TOSA_GPIO_BAT1_LOW) +#define TOSA_IRQ_GPIO_KEY_SENSE(a) IRQ_GPIO(69+(a)) + +#define TOSA_IRQ_GPIO_MAIN_BAT_LOW IRQ_GPIO(TOSA_GPIO_MAIN_BAT_LOW) + +extern struct platform_device tosascoop_jc_device; +extern struct platform_device tosascoop_device; +#endif /* _ASM_ARCH_TOSA_H_ */ -- cgit v1.2.3 From 84613387cb60bc760a4588822cd61fb88e1d7fad Mon Sep 17 00:00:00 2001 From: Alessandro Zummo Date: Sun, 6 Nov 2005 14:34:12 +0000 Subject: [ARM] 3089/1: ixp4xx AHB/PCI endianness fix MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Patch from Alessandro Zummo This patch fixes AHB/PCI endianness problems when the processor is in little-endian mode. The patch configures the CSR register closely following the directives in [1], paragraph 4.1, page 19. According to the considerations in [1], page 11, while the AHB bus supports both endian modes, on the IXP4XX it always uses big-endian. The PCI bus is connected to the South AHB. A wrong setting in the CSR register will thus cause a malfunctional PCI bus. A schematic diagram of the bus interconnections on the IXP4XX can be found in [1], page 18. The patch has been verified to work on the NSLU2 in both LE and BE modes. The author is Peter Korsgaard. [1] Intel® IXP4XX Product Line of Network Processors and IXC1100 Control Plane Processor: Understanding Big Endian and Little Endian Modes http://www.intel.com/design/network/applnots/25423701.pdf Signed-off-by: Alessandro Zummo Signed-off-by: Deepak Saxena Signed-off-by: Russell King --- arch/arm/mach-ixp4xx/common-pci.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm/mach-ixp4xx/common-pci.c b/arch/arm/mach-ixp4xx/common-pci.c index 2b544363c07..9795da270e3 100644 --- a/arch/arm/mach-ixp4xx/common-pci.c +++ b/arch/arm/mach-ixp4xx/common-pci.c @@ -427,7 +427,7 @@ void __init ixp4xx_pci_preinit(void) #ifdef __ARMEB__ *PCI_CSR = PCI_CSR_IC | PCI_CSR_ABE | PCI_CSR_PDS | PCI_CSR_ADS; #else - *PCI_CSR = PCI_CSR_IC; + *PCI_CSR = PCI_CSR_IC | PCI_CSR_ABE; #endif pr_debug("DONE\n"); -- cgit v1.2.3 From 7240f1f183f085f6b7af44ec274b5b6123dfdead Mon Sep 17 00:00:00 2001 From: Lennert Buytenhek Date: Sun, 6 Nov 2005 14:34:13 +0000 Subject: [ARM] 3114/1: use ixp2000_reg_wrb in ixp2000 uengine loader Patch from Lennert Buytenhek Make the uengine loader use ixp2000_reg_wrb in the right places. Signed-off-by: Lennert Buytenhek Signed-off-by: Russell King --- arch/arm/mach-ixp2000/uengine.c | 11 +++++------ 1 file changed, 5 insertions(+), 6 deletions(-) diff --git a/arch/arm/mach-ixp2000/uengine.c b/arch/arm/mach-ixp2000/uengine.c index 43e234349d4..ec4e007a22e 100644 --- a/arch/arm/mach-ixp2000/uengine.c +++ b/arch/arm/mach-ixp2000/uengine.c @@ -91,8 +91,8 @@ EXPORT_SYMBOL(ixp2000_uengine_csr_write); void ixp2000_uengine_reset(u32 uengine_mask) { - ixp2000_reg_write(IXP2000_RESET1, uengine_mask & ixp2000_uengine_mask); - ixp2000_reg_write(IXP2000_RESET1, 0); + ixp2000_reg_wrb(IXP2000_RESET1, uengine_mask & ixp2000_uengine_mask); + ixp2000_reg_wrb(IXP2000_RESET1, 0); } EXPORT_SYMBOL(ixp2000_uengine_reset); @@ -452,21 +452,20 @@ static int __init ixp2000_uengine_init(void) /* * Reset microengines. */ - ixp2000_reg_write(IXP2000_RESET1, ixp2000_uengine_mask); - ixp2000_reg_write(IXP2000_RESET1, 0); + ixp2000_uengine_reset(ixp2000_uengine_mask); /* * Synchronise timestamp counters across all microengines. */ value = ixp2000_reg_read(IXP2000_MISC_CONTROL); - ixp2000_reg_write(IXP2000_MISC_CONTROL, value & ~0x80); + ixp2000_reg_wrb(IXP2000_MISC_CONTROL, value & ~0x80); for (uengine = 0; uengine < 32; uengine++) { if (ixp2000_uengine_mask & (1 << uengine)) { ixp2000_uengine_csr_write(uengine, TIMESTAMP_LOW, 0); ixp2000_uengine_csr_write(uengine, TIMESTAMP_HIGH, 0); } } - ixp2000_reg_write(IXP2000_MISC_CONTROL, value | 0x80); + ixp2000_reg_wrb(IXP2000_MISC_CONTROL, value | 0x80); return 0; } -- cgit v1.2.3 From b7ec479553b8755dd95ee988a957cbf2aef351dc Mon Sep 17 00:00:00 2001 From: Nicolas Pitre Date: Sun, 6 Nov 2005 14:42:37 +0000 Subject: [ARM] 3115/1: small optimizations to exception vector entry code Patch from Nicolas Pitre Since we know the value of cpsr on entry, we can replace the bic+orr with a single eor. Also remove a possible result delay (at least on XScale). Signed-off-by: Nicolas Pitre Signed-off-by: Russell King --- arch/arm/kernel/entry-armv.S | 15 +++++++-------- 1 file changed, 7 insertions(+), 8 deletions(-) diff --git a/arch/arm/kernel/entry-armv.S b/arch/arm/kernel/entry-armv.S index be439cab92c..a511ec5b11a 100644 --- a/arch/arm/kernel/entry-armv.S +++ b/arch/arm/kernel/entry-armv.S @@ -785,7 +785,7 @@ __kuser_helper_end: * SP points to a minimal amount of processor-private memory, the address * of which is copied into r0 for the mode specific abort handler. */ - .macro vector_stub, name, correction=0 + .macro vector_stub, name, mode, correction=0 .align 5 vector_\name: @@ -805,15 +805,14 @@ vector_\name: @ Prepare for SVC32 mode. IRQs remain disabled. @ mrs r0, cpsr - bic r0, r0, #MODE_MASK - orr r0, r0, #SVC_MODE + eor r0, r0, #(\mode ^ SVC_MODE) msr spsr_cxsf, r0 @ @ the branch table must immediately follow this code @ - mov r0, sp and lr, lr, #0x0f + mov r0, sp ldr lr, [pc, lr, lsl #2] movs pc, lr @ branch to handler in SVC mode .endm @@ -823,7 +822,7 @@ __stubs_start: /* * Interrupt dispatcher */ - vector_stub irq, 4 + vector_stub irq, IRQ_MODE, 4 .long __irq_usr @ 0 (USR_26 / USR_32) .long __irq_invalid @ 1 (FIQ_26 / FIQ_32) @@ -846,7 +845,7 @@ __stubs_start: * Data abort dispatcher * Enter in ABT mode, spsr = USR CPSR, lr = USR PC */ - vector_stub dabt, 8 + vector_stub dabt, ABT_MODE, 8 .long __dabt_usr @ 0 (USR_26 / USR_32) .long __dabt_invalid @ 1 (FIQ_26 / FIQ_32) @@ -869,7 +868,7 @@ __stubs_start: * Prefetch abort dispatcher * Enter in ABT mode, spsr = USR CPSR, lr = USR PC */ - vector_stub pabt, 4 + vector_stub pabt, ABT_MODE, 4 .long __pabt_usr @ 0 (USR_26 / USR_32) .long __pabt_invalid @ 1 (FIQ_26 / FIQ_32) @@ -892,7 +891,7 @@ __stubs_start: * Undef instr entry dispatcher * Enter in UND mode, spsr = SVC/USR CPSR, lr = SVC/USR PC */ - vector_stub und + vector_stub und, UND_MODE .long __und_usr @ 0 (USR_26 / USR_32) .long __und_invalid @ 1 (FIQ_26 / FIQ_32) -- cgit v1.2.3 From 756c7b748926b0baec6d2a921c3711679282c8fd Mon Sep 17 00:00:00 2001 From: Richard Purdie Date: Sun, 6 Nov 2005 15:03:23 +0000 Subject: [ARM] 3113/1: PXA: Allow machines to override (and also reuse) pxa pm functions Patch from Richard Purdie Update the PXA pm.c file to allow machines (such as the Sharp Zaurus) to override the standard pm functions but reuse/wrap them where needed. The init call is made slightly earlier to give machine code an init level to override them in removing any race. Signed-off-by: Richard Purdie Signed-off-by: Russell King --- arch/arm/mach-pxa/pm.c | 16 ++++++++++++---- include/asm-arm/arch-pxa/pm.h | 12 ++++++++++++ 2 files changed, 24 insertions(+), 4 deletions(-) create mode 100644 include/asm-arm/arch-pxa/pm.h diff --git a/arch/arm/mach-pxa/pm.c b/arch/arm/mach-pxa/pm.c index ac4dd433616..f74b9af112d 100644 --- a/arch/arm/mach-pxa/pm.c +++ b/arch/arm/mach-pxa/pm.c @@ -12,6 +12,7 @@ */ #include #include +#include #include #include #include @@ -19,6 +20,7 @@ #include #include #include +#include #include #include #include @@ -72,7 +74,7 @@ enum { SLEEP_SAVE_START = 0, }; -static int pxa_pm_enter(suspend_state_t state) +int pxa_pm_enter(suspend_state_t state) { unsigned long sleep_save[SLEEP_SAVE_SIZE]; unsigned long checksum = 0; @@ -191,6 +193,8 @@ static int pxa_pm_enter(suspend_state_t state) return 0; } +EXPORT_SYMBOL_GPL(pxa_pm_enter); + unsigned long sleep_phys_sp(void *sp) { return virt_to_phys(sp); @@ -199,21 +203,25 @@ unsigned long sleep_phys_sp(void *sp) /* * Called after processes are frozen, but before we shut down devices. */ -static int pxa_pm_prepare(suspend_state_t state) +int pxa_pm_prepare(suspend_state_t state) { extern int pxa_cpu_pm_prepare(suspend_state_t state); return pxa_cpu_pm_prepare(state); } +EXPORT_SYMBOL_GPL(pxa_pm_prepare); + /* * Called after devices are re-setup, but before processes are thawed. */ -static int pxa_pm_finish(suspend_state_t state) +int pxa_pm_finish(suspend_state_t state) { return 0; } +EXPORT_SYMBOL_GPL(pxa_pm_finish); + /* * Set to PM_DISK_FIRMWARE so we can quickly veto suspend-to-disk. */ @@ -230,4 +238,4 @@ static int __init pxa_pm_init(void) return 0; } -late_initcall(pxa_pm_init); +device_initcall(pxa_pm_init); diff --git a/include/asm-arm/arch-pxa/pm.h b/include/asm-arm/arch-pxa/pm.h new file mode 100644 index 00000000000..7a8a1cdf430 --- /dev/null +++ b/include/asm-arm/arch-pxa/pm.h @@ -0,0 +1,12 @@ +/* + * Copyright (c) 2005 Richard Purdie + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + */ + +extern int pxa_pm_prepare(suspend_state_t state); +extern int pxa_pm_enter(suspend_state_t state); +extern int pxa_pm_finish(suspend_state_t state); -- cgit v1.2.3 From d3997abf699655d2ec012e944fb34668cc3ec6d7 Mon Sep 17 00:00:00 2001 From: Russell King Date: Sun, 6 Nov 2005 15:45:00 +0000 Subject: [ARM] Fix another use of // as a comment // disagrees with ld's script parsing ability. Don't use it. Signed-off-by: Russell King --- include/asm-arm/arch-iop3xx/iop331.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/include/asm-arm/arch-iop3xx/iop331.h b/include/asm-arm/arch-iop3xx/iop331.h index 96adffd8bad..fbf0cc11bdd 100644 --- a/include/asm-arm/arch-iop3xx/iop331.h +++ b/include/asm-arm/arch-iop3xx/iop331.h @@ -42,7 +42,7 @@ /* this can be 128M if OMWTVR1 is set */ #define IOP331_PCI_MEM_WINDOW_SIZE 0x04000000 /* 64M outbound window */ -//#define IOP331_PCI_MEM_WINDOW_SIZE (~*IOP331_IALR1 + 1) +/* #define IOP331_PCI_MEM_WINDOW_SIZE (~*IOP331_IALR1 + 1) */ #define IOP331_PCI_LOWER_MEM_PA 0x80000000 #define IOP331_PCI_LOWER_MEM_BA (*IOP331_OMWTVR0) #define IOP331_PCI_UPPER_MEM_PA (IOP331_PCI_LOWER_MEM_PA + IOP331_PCI_MEM_WINDOW_SIZE - 1) -- cgit v1.2.3 From 4299051ebe89ab1eeadeaf4cf06ce63421412232 Mon Sep 17 00:00:00 2001 From: Russell King Date: Sun, 6 Nov 2005 15:46:57 +0000 Subject: [ARM] Fix missing declaration of cache_is_vivt() Signed-off-by: Russell King --- arch/arm/kernel/ecard.c | 1 + 1 file changed, 1 insertion(+) diff --git a/arch/arm/kernel/ecard.c b/arch/arm/kernel/ecard.c index dceb826bd21..c445b0a848b 100644 --- a/arch/arm/kernel/ecard.c +++ b/arch/arm/kernel/ecard.c @@ -41,6 +41,7 @@ #include #include +#include #include #include #include -- cgit v1.2.3 From 4fe15ba08fdb280536bd7019e8505969c4ac6852 Mon Sep 17 00:00:00 2001 From: Russell King Date: Sun, 6 Nov 2005 19:47:04 +0000 Subject: [ARM] Fix second missing declaration of cache_is_vivt() Signed-off-by: Russell King --- arch/arm/kernel/ecard.c | 1 - include/asm-arm/mmu_context.h | 1 + 2 files changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm/kernel/ecard.c b/arch/arm/kernel/ecard.c index c445b0a848b..dceb826bd21 100644 --- a/arch/arm/kernel/ecard.c +++ b/arch/arm/kernel/ecard.c @@ -41,7 +41,6 @@ #include #include -#include #include #include #include diff --git a/include/asm-arm/mmu_context.h b/include/asm-arm/mmu_context.h index 57b8def83d4..3d4b810d8c3 100644 --- a/include/asm-arm/mmu_context.h +++ b/include/asm-arm/mmu_context.h @@ -13,6 +13,7 @@ #ifndef __ASM_ARM_MMU_CONTEXT_H #define __ASM_ARM_MMU_CONTEXT_H +#include #include #if __LINUX_ARM_ARCH__ >= 6 -- cgit v1.2.3 From 32f8b97ca39421057d8adef05b7219127355d60c Mon Sep 17 00:00:00 2001 From: Russell King Date: Sun, 6 Nov 2005 19:49:21 +0000 Subject: [ARM] Don't call dump_cpu_info unless we're booting We don't want to call dump_cpu_info() from cpu_init() after boot since it produces a lot of unnecessary noise - since cpu_init() gets called on resume and hotplug cpu insertion events. Signed-off-by: Russell King --- arch/arm/kernel/setup.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/arch/arm/kernel/setup.c b/arch/arm/kernel/setup.c index c9b69771f92..a6d7fb81330 100644 --- a/arch/arm/kernel/setup.c +++ b/arch/arm/kernel/setup.c @@ -338,7 +338,8 @@ void cpu_init(void) BUG(); } - dump_cpu_info(cpu); + if (system_state == SYSTEM_BOOTING) + dump_cpu_info(cpu); /* * setup stacks for re-entrant exception handlers -- cgit v1.2.3 From 1555972231f3202f00e04f7c42d2db858e11b874 Mon Sep 17 00:00:00 2001 From: Russell King Date: Sun, 6 Nov 2005 21:41:08 +0000 Subject: [ARM] Fix /proc/cpuinfo format for ARM SMP glibc expects to count lines beginning with "processor" to determine the number of processors, not lines beginning with "Processor". So, give glibc the format it expects. Signed-off-by: Russell King --- arch/arm/kernel/setup.c | 7 ++++++- 1 file changed, 6 insertions(+), 1 deletion(-) diff --git a/arch/arm/kernel/setup.c b/arch/arm/kernel/setup.c index a6d7fb81330..85774165e9f 100644 --- a/arch/arm/kernel/setup.c +++ b/arch/arm/kernel/setup.c @@ -839,7 +839,12 @@ static int c_show(struct seq_file *m, void *v) #if defined(CONFIG_SMP) for_each_online_cpu(i) { - seq_printf(m, "Processor\t: %d\n", i); + /* + * glibc reads /proc/cpuinfo to determine the number of + * online processors, looking for lines beginning with + * "processor". Give glibc what it expects. + */ + seq_printf(m, "processor\t: %d\n", i); seq_printf(m, "BogoMIPS\t: %lu.%02lu\n\n", per_cpu(cpu_data, i).loops_per_jiffy / (500000UL/HZ), (per_cpu(cpu_data, i).loops_per_jiffy / (5000UL/HZ)) % 100); -- cgit v1.2.3