From b99883dcd565e30299a6c5c3250725a4d48a8253 Mon Sep 17 00:00:00 2001 From: Jean Delvare Date: Fri, 5 Mar 2010 22:17:15 +0100 Subject: hwmon: (it87) Display fan outputs in automatic mode as such The it87 driver doesn't yet support automatic fan control. Let it at least tell the user when a fan output is in automatic mode. Also let the user switch from automatic mode (possibly set by the BIOS) to manual mode and back without losing the settings. Signed-off-by: Jean Delvare --- drivers/hwmon/it87.c | 99 ++++++++++++++++++++++++++++++++-------------------- 1 file changed, 61 insertions(+), 38 deletions(-) diff --git a/drivers/hwmon/it87.c b/drivers/hwmon/it87.c index 0ffe84d190b..49022bd2a0a 100644 --- a/drivers/hwmon/it87.c +++ b/drivers/hwmon/it87.c @@ -281,7 +281,14 @@ struct it87_data { u32 alarms; /* Register encoding, combined */ u8 fan_main_ctrl; /* Register value */ u8 fan_ctl; /* Register value */ - u8 manual_pwm_ctl[3]; /* manual PWM value set by user */ + + /* The following 3 arrays correspond to the same registers. The + * meaning of bits 6-0 depends on the value of bit 7, and we want + * to preserve settings on mode changes, so we have to track all + * values separately. */ + u8 pwm_ctrl[3]; /* Register value */ + u8 pwm_duty[3]; /* Manual PWM value set by user (bit 6-0) */ + u8 pwm_temp_map[3]; /* PWM to temp. chan. mapping (bits 1-0) */ }; static inline int has_16bit_fans(const struct it87_data *data) @@ -531,6 +538,19 @@ show_sensor_offset(2); show_sensor_offset(3); /* 3 Fans */ + +static int pwm_mode(const struct it87_data *data, int nr) +{ + int ctrl = data->fan_main_ctrl & (1 << nr); + + if (ctrl == 0) /* Full speed */ + return 0; + if (data->pwm_ctrl[nr] & 0x80) /* Automatic mode */ + return 2; + else /* Manual mode */ + return 1; +} + static ssize_t show_fan(struct device *dev, struct device_attribute *attr, char *buf) { @@ -567,7 +587,7 @@ static ssize_t show_pwm_enable(struct device *dev, struct device_attribute *attr int nr = sensor_attr->index; struct it87_data *data = it87_update_device(dev); - return sprintf(buf,"%d\n", (data->fan_main_ctrl & (1 << nr)) ? 1 : 0); + return sprintf(buf, "%d\n", pwm_mode(data, nr)); } static ssize_t show_pwm(struct device *dev, struct device_attribute *attr, char *buf) @@ -576,7 +596,7 @@ static ssize_t show_pwm(struct device *dev, struct device_attribute *attr, int nr = sensor_attr->index; struct it87_data *data = it87_update_device(dev); - return sprintf(buf,"%d\n", data->manual_pwm_ctl[nr]); + return sprintf(buf, "%d\n", PWM_FROM_REG(data->pwm_duty[nr])); } static ssize_t show_pwm_freq(struct device *dev, struct device_attribute *attr, char *buf) @@ -660,6 +680,9 @@ static ssize_t set_pwm_enable(struct device *dev, struct it87_data *data = dev_get_drvdata(dev); int val = simple_strtol(buf, NULL, 10); + if (val < 0 || val > 2) + return -EINVAL; + mutex_lock(&data->update_lock); if (val == 0) { @@ -670,15 +693,15 @@ static ssize_t set_pwm_enable(struct device *dev, /* set on/off mode */ data->fan_main_ctrl &= ~(1 << nr); it87_write_value(data, IT87_REG_FAN_MAIN_CTRL, data->fan_main_ctrl); - } else if (val == 1) { + } else { + if (val == 1) /* Manual mode */ + data->pwm_ctrl[nr] = data->pwm_duty[nr]; + else /* Automatic mode */ + data->pwm_ctrl[nr] = 0x80 | data->pwm_temp_map[nr]; + it87_write_value(data, IT87_REG_PWM(nr), data->pwm_ctrl[nr]); /* set SmartGuardian mode */ data->fan_main_ctrl |= (1 << nr); it87_write_value(data, IT87_REG_FAN_MAIN_CTRL, data->fan_main_ctrl); - /* set saved pwm value, clear FAN_CTLX PWM mode bit */ - it87_write_value(data, IT87_REG_PWM(nr), PWM_TO_REG(data->manual_pwm_ctl[nr])); - } else { - mutex_unlock(&data->update_lock); - return -EINVAL; } mutex_unlock(&data->update_lock); @@ -697,9 +720,13 @@ static ssize_t set_pwm(struct device *dev, struct device_attribute *attr, return -EINVAL; mutex_lock(&data->update_lock); - data->manual_pwm_ctl[nr] = val; - if (data->fan_main_ctrl & (1 << nr)) - it87_write_value(data, IT87_REG_PWM(nr), PWM_TO_REG(data->manual_pwm_ctl[nr])); + data->pwm_duty[nr] = PWM_TO_REG(val); + /* If we are in manual mode, write the duty cycle immediately; + * otherwise, just store it for later use. */ + if (!(data->pwm_ctrl[nr] & 0x80)) { + data->pwm_ctrl[nr] = data->pwm_duty[nr]; + it87_write_value(data, IT87_REG_PWM(nr), data->pwm_ctrl[nr]); + } mutex_unlock(&data->update_lock); return count; } @@ -1387,15 +1414,17 @@ static void __devinit it87_init_device(struct platform_device *pdev) int tmp, i; u8 mask; - /* initialize to sane defaults: - * - if the chip is in manual pwm mode, this will be overwritten with - * the actual settings on the chip (so in this case, initialization - * is not needed) - * - if in automatic or on/off mode, we could switch to manual mode, - * read the registers and set manual_pwm_ctl accordingly, but currently - * this is not implemented, so we initialize to something sane */ + /* For each PWM channel: + * - If it is in automatic mode, setting to manual mode should set + * the fan to full speed by default. + * - If it is in manual mode, we need a mapping to temperature + * channels to use when later setting to automatic mode later. + * Use a 1:1 mapping by default (we are clueless.) + * In both cases, the value can (and should) be changed by the user + * prior to switching to a different mode. */ for (i = 0; i < 3; i++) { - data->manual_pwm_ctl[i] = 0xff; + data->pwm_temp_map[i] = i; + data->pwm_duty[i] = 0x7f; /* Full speed */ } /* Some chips seem to have default value 0xff for all limit @@ -1461,30 +1490,21 @@ static void __devinit it87_init_device(struct platform_device *pdev) /* Fan input pins may be used for alternative functions */ data->has_fan &= ~sio_data->skip_fan; - /* Set current fan mode registers and the default settings for the - * other mode registers */ - for (i = 0; i < 3; i++) { - if (data->fan_main_ctrl & (1 << i)) { - /* pwm mode */ - tmp = it87_read_value(data, IT87_REG_PWM(i)); - if (tmp & 0x80) { - /* automatic pwm - not yet implemented, but - * leave the settings made by the BIOS alone - * until a change is requested via the sysfs - * interface */ - } else { - /* manual pwm */ - data->manual_pwm_ctl[i] = PWM_FROM_REG(tmp); - } - } - } - /* Start monitoring */ it87_write_value(data, IT87_REG_CONFIG, (it87_read_value(data, IT87_REG_CONFIG) & 0x36) | (update_vbat ? 0x41 : 0x01)); } +static void it87_update_pwm_ctrl(struct it87_data *data, int nr) +{ + data->pwm_ctrl[nr] = it87_read_value(data, IT87_REG_PWM(nr)); + if (data->pwm_ctrl[nr] & 0x80) /* Automatic mode */ + data->pwm_temp_map[nr] = data->pwm_ctrl[nr] & 0x03; + else /* Manual mode */ + data->pwm_duty[nr] = data->pwm_ctrl[nr] & 0x7f; +} + static struct it87_data *it87_update_device(struct device *dev) { struct it87_data *data = dev_get_drvdata(dev); @@ -1551,9 +1571,12 @@ static struct it87_data *it87_update_device(struct device *dev) it87_read_value(data, IT87_REG_ALARM1) | (it87_read_value(data, IT87_REG_ALARM2) << 8) | (it87_read_value(data, IT87_REG_ALARM3) << 16); + data->fan_main_ctrl = it87_read_value(data, IT87_REG_FAN_MAIN_CTRL); data->fan_ctl = it87_read_value(data, IT87_REG_FAN_CTL); + for (i = 0; i < 3; i++) + it87_update_pwm_ctrl(data, i); data->sensor = it87_read_value(data, IT87_REG_TEMP_ENABLE); /* The 8705 does not have VID capability. -- cgit v1.2.3