From 951b62c11e86acf8c55d9828aa8c921575023c29 Mon Sep 17 00:00:00 2001 From: Matthew Wilcox Date: Fri, 5 Oct 2007 15:57:06 -0400 Subject: [SCSI] advansys: Fix bug in AdvLoadMicrocode buf[i] can be up to 0xfd, so doubling it and assigning the result to an unsigned char truncates the value. Just use an unsigned int instead; it's only a temporary. Signed-off-by: Matthew Wilcox Cc: Stable Tree Signed-off-by: James Bottomley --- drivers/scsi/advansys.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/scsi/advansys.c b/drivers/scsi/advansys.c index 3c2d6888bb8..8591585e5cc 100644 --- a/drivers/scsi/advansys.c +++ b/drivers/scsi/advansys.c @@ -6439,7 +6439,7 @@ static int AdvLoadMicrocode(AdvPortAddr iop_base, unsigned char *buf, int size, i += 2; len += 2; } else { - unsigned char off = buf[i] * 2; + unsigned int off = buf[i] * 2; unsigned short word = (buf[off + 1] << 8) | buf[off]; AdvWriteWordAutoIncLram(iop_base, word); len += 2; -- cgit v1.2.3 From 67951f63807328b81e45c3c87af049c55c0a0081 Mon Sep 17 00:00:00 2001 From: James Bottomley Date: Thu, 6 Mar 2008 15:32:06 -0600 Subject: [SCSI] Fix dependency problems in SCSI drivers We have several drivers that don't list SCSI as a dependency in Kconfig. That leads to them potentially being selected as Y even if SCSI is M (which will produce a build failure). Fix this by making the if SCSI_LOWLEVEL that goes around all the drivers a tristate forcing them all automatically to inherit the value of SCSI. Signed-off-by: James Bottomley --- drivers/scsi/Kconfig | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/scsi/Kconfig b/drivers/scsi/Kconfig index c46666a2480..b9d374082b6 100644 --- a/drivers/scsi/Kconfig +++ b/drivers/scsi/Kconfig @@ -325,7 +325,7 @@ menuconfig SCSI_LOWLEVEL depends on SCSI!=n default y -if SCSI_LOWLEVEL +if SCSI_LOWLEVEL && SCSI config ISCSI_TCP tristate "iSCSI Initiator over TCP/IP" -- cgit v1.2.3 From 4b6f5b3a993cbe34b4280f252bccc76967c185c8 Mon Sep 17 00:00:00 2001 From: Mike Christie Date: Tue, 11 Mar 2008 00:36:51 -0500 Subject: [SCSI] fix bsg queue oops with iscsi logout Delay bsg unregistration, because we want to wait until all the request/cmds have released their reference. Signed-off-by: Mike Christie Acked-by: FUJITA Tomonori Signed-off-by: James Bottomley --- drivers/scsi/scsi_sysfs.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/scsi/scsi_sysfs.c b/drivers/scsi/scsi_sysfs.c index ed83cdb6e67..b9b09a70458 100644 --- a/drivers/scsi/scsi_sysfs.c +++ b/drivers/scsi/scsi_sysfs.c @@ -294,6 +294,7 @@ static void scsi_device_dev_release_usercontext(struct work_struct *work) } if (sdev->request_queue) { + bsg_unregister_queue(sdev->request_queue); sdev->request_queue->queuedata = NULL; /* user context needed to free queue */ scsi_free_queue(sdev->request_queue); @@ -857,7 +858,6 @@ void __scsi_remove_device(struct scsi_device *sdev) if (scsi_device_set_state(sdev, SDEV_CANCEL) != 0) return; - bsg_unregister_queue(sdev->request_queue); class_device_unregister(&sdev->sdev_classdev); transport_remove_device(dev); device_del(dev); -- cgit v1.2.3 From e92e63aabacf049fd64477e5e29eae0375d8d064 Mon Sep 17 00:00:00 2001 From: Boaz Harrosh Date: Wed, 12 Mar 2008 19:20:09 +0200 Subject: [SCSI] isd200: Allocate sense_buffer for hacked up scsi_cmnd Since the separation of sense_buffer from scsi_cmnd, Drivers that hack their own struct scsi_cmnd like here isd200, must also take care of their own sense_buffer. Signed-off-by: Boaz Harrosh Signed-off-by: James Bottomley --- drivers/usb/storage/isd200.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) diff --git a/drivers/usb/storage/isd200.c b/drivers/usb/storage/isd200.c index 2ae1e8673b1..9d3f28b92cb 100644 --- a/drivers/usb/storage/isd200.c +++ b/drivers/usb/storage/isd200.c @@ -1469,6 +1469,7 @@ static void isd200_free_info_ptrs(void *info_) if (info) { kfree(info->id); kfree(info->RegsBuf); + kfree(info->srb.sense_buffer); } } @@ -1494,7 +1495,9 @@ static int isd200_init_info(struct us_data *us) kzalloc(sizeof(struct hd_driveid), GFP_KERNEL); info->RegsBuf = (unsigned char *) kmalloc(sizeof(info->ATARegs), GFP_KERNEL); - if (!info->id || !info->RegsBuf) { + info->srb.sense_buffer = + kmalloc(SCSI_SENSE_BUFFERSIZE, GFP_KERNEL); + if (!info->id || !info->RegsBuf || !info->srb.sense_buffer) { isd200_free_info_ptrs(info); kfree(info); retStatus = ISD200_ERROR; -- cgit v1.2.3 From 4d3995b14ba7abcdd475d17b8751db55d8a95b9e Mon Sep 17 00:00:00 2001 From: nickcheng Date: Tue, 4 Mar 2008 17:49:59 +0800 Subject: [SCSI] arcmsr: fix iounmap error for Type B adapter The Type B Adapter teardown does iounmap on pointers subtracted by a constant offset. Since the offset is in bytes, we need the pointers to be of type void * not uint32_t * so the subtraction is done in the correct units and we iounmap the correct area. Signed-off-by: Nick Cheng Signed-off-by: James Bottomley --- drivers/scsi/arcmsr/arcmsr.h | 14 +++++++------- 1 file changed, 7 insertions(+), 7 deletions(-) diff --git a/drivers/scsi/arcmsr/arcmsr.h b/drivers/scsi/arcmsr/arcmsr.h index 0393707bdfc..3288be2e49f 100644 --- a/drivers/scsi/arcmsr/arcmsr.h +++ b/drivers/scsi/arcmsr/arcmsr.h @@ -341,13 +341,13 @@ struct MessageUnit_B uint32_t done_qbuffer[ARCMSR_MAX_HBB_POSTQUEUE]; uint32_t postq_index; uint32_t doneq_index; - uint32_t __iomem *drv2iop_doorbell_reg; - uint32_t __iomem *drv2iop_doorbell_mask_reg; - uint32_t __iomem *iop2drv_doorbell_reg; - uint32_t __iomem *iop2drv_doorbell_mask_reg; - uint32_t __iomem *msgcode_rwbuffer_reg; - uint32_t __iomem *ioctl_wbuffer_reg; - uint32_t __iomem *ioctl_rbuffer_reg; + void __iomem *drv2iop_doorbell_reg; + void __iomem *drv2iop_doorbell_mask_reg; + void __iomem *iop2drv_doorbell_reg; + void __iomem *iop2drv_doorbell_mask_reg; + void __iomem *msgcode_rwbuffer_reg; + void __iomem *ioctl_wbuffer_reg; + void __iomem *ioctl_rbuffer_reg; }; /* -- cgit v1.2.3 From 1b96f8955aaeeb05f7fb7ff548aa12415fbf3904 Mon Sep 17 00:00:00 2001 From: Sven Schnelle Date: Mon, 10 Mar 2008 22:50:04 +0100 Subject: [SCSI] gdth: Allocate sense_buffer to prevent NULL pointer dereference Fix NULL pointer dereference during execution of Internal commands, where gdth only allocates scp, but not scp->sense_buffer. The rest of the code assumes that sense_buffer is allocated, which leads to a kernel oops e.g. on reboot (during cache flush). Signed-off-by: Sven Schnelle Signed-off-by: James Bottomley --- drivers/scsi/gdth.c | 7 +++++++ 1 file changed, 7 insertions(+) diff --git a/drivers/scsi/gdth.c b/drivers/scsi/gdth.c index 27ebd336409..0b2080d3357 100644 --- a/drivers/scsi/gdth.c +++ b/drivers/scsi/gdth.c @@ -493,6 +493,12 @@ int __gdth_execute(struct scsi_device *sdev, gdth_cmd_str *gdtcmd, char *cmnd, if (!scp) return -ENOMEM; + scp->sense_buffer = kzalloc(SCSI_SENSE_BUFFERSIZE, GFP_KERNEL); + if (!scp->sense_buffer) { + kfree(scp); + return -ENOMEM; + } + scp->device = sdev; memset(&cmndinfo, 0, sizeof(cmndinfo)); @@ -513,6 +519,7 @@ int __gdth_execute(struct scsi_device *sdev, gdth_cmd_str *gdtcmd, char *cmnd, rval = cmndinfo.status; if (info) *info = cmndinfo.info; + kfree(scp->sense_buffer); kfree(scp); return rval; } -- cgit v1.2.3 From 4d4109d0eb6930e59942d019980b83af679f187b Mon Sep 17 00:00:00 2001 From: "Prakash, Sathya" Date: Fri, 7 Mar 2008 16:19:50 +0530 Subject: [SCSI] mpt fusion: Power Management fixes for MPT SAS PCI-E controllers The system power state changes like hibernation and standby are not happening properly with 106XE controllers, this patch modifies the driver to free resources and allocate resources in power management entry points [jejb: compile fixes for upstream] Signed-off-by: Sathya Prakash Signed-off-by: James Bottomley --- drivers/message/fusion/mptbase.c | 276 +++++++++++++++++++++----------------- drivers/message/fusion/mptscsih.c | 11 +- 2 files changed, 166 insertions(+), 121 deletions(-) diff --git a/drivers/message/fusion/mptbase.c b/drivers/message/fusion/mptbase.c index 6b6df867958..c6be6eba7dc 100644 --- a/drivers/message/fusion/mptbase.c +++ b/drivers/message/fusion/mptbase.c @@ -1430,6 +1430,98 @@ mpt_get_product_name(u16 vendor, u16 device, u8 revision, char *prod_name) sprintf(prod_name, "%s", product_str); } +/** + * mpt_mapresources - map in memory mapped io + * @ioc: Pointer to pointer to IOC adapter + * + **/ +static int +mpt_mapresources(MPT_ADAPTER *ioc) +{ + u8 __iomem *mem; + int ii; + unsigned long mem_phys; + unsigned long port; + u32 msize; + u32 psize; + u8 revision; + int r = -ENODEV; + struct pci_dev *pdev; + + pdev = ioc->pcidev; + ioc->bars = pci_select_bars(pdev, IORESOURCE_MEM); + if (pci_enable_device_mem(pdev)) { + printk(MYIOC_s_ERR_FMT "pci_enable_device_mem() " + "failed\n", ioc->name); + return r; + } + if (pci_request_selected_regions(pdev, ioc->bars, "mpt")) { + printk(MYIOC_s_ERR_FMT "pci_request_selected_regions() with " + "MEM failed\n", ioc->name); + return r; + } + + pci_read_config_byte(pdev, PCI_CLASS_REVISION, &revision); + + if (!pci_set_dma_mask(pdev, DMA_64BIT_MASK) + && !pci_set_consistent_dma_mask(pdev, DMA_64BIT_MASK)) { + dinitprintk(ioc, printk(MYIOC_s_INFO_FMT + ": 64 BIT PCI BUS DMA ADDRESSING SUPPORTED\n", + ioc->name)); + } else if (!pci_set_dma_mask(pdev, DMA_32BIT_MASK) + && !pci_set_consistent_dma_mask(pdev, DMA_32BIT_MASK)) { + dinitprintk(ioc, printk(MYIOC_s_INFO_FMT + ": 32 BIT PCI BUS DMA ADDRESSING SUPPORTED\n", + ioc->name)); + } else { + printk(MYIOC_s_WARN_FMT "no suitable DMA mask for %s\n", + ioc->name, pci_name(pdev)); + pci_release_selected_regions(pdev, ioc->bars); + return r; + } + + mem_phys = msize = 0; + port = psize = 0; + for (ii = 0; ii < DEVICE_COUNT_RESOURCE; ii++) { + if (pci_resource_flags(pdev, ii) & PCI_BASE_ADDRESS_SPACE_IO) { + if (psize) + continue; + /* Get I/O space! */ + port = pci_resource_start(pdev, ii); + psize = pci_resource_len(pdev, ii); + } else { + if (msize) + continue; + /* Get memmap */ + mem_phys = pci_resource_start(pdev, ii); + msize = pci_resource_len(pdev, ii); + } + } + ioc->mem_size = msize; + + mem = NULL; + /* Get logical ptr for PciMem0 space */ + /*mem = ioremap(mem_phys, msize);*/ + mem = ioremap(mem_phys, msize); + if (mem == NULL) { + printk(MYIOC_s_ERR_FMT ": ERROR - Unable to map adapter" + " memory!\n", ioc->name); + return -EINVAL; + } + ioc->memmap = mem; + dinitprintk(ioc, printk(MYIOC_s_INFO_FMT "mem = %p, mem_phys = %lx\n", + ioc->name, mem, mem_phys)); + + ioc->mem_phys = mem_phys; + ioc->chip = (SYSIF_REGS __iomem *)mem; + + /* Save Port IO values in case we need to do downloadboot */ + ioc->pio_mem_phys = port; + ioc->pio_chip = (SYSIF_REGS __iomem *)port; + + return 0; +} + /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ /** * mpt_attach - Install a PCI intelligent MPT adapter. @@ -1452,13 +1544,6 @@ int mpt_attach(struct pci_dev *pdev, const struct pci_device_id *id) { MPT_ADAPTER *ioc; - u8 __iomem *mem; - u8 __iomem *pmem; - unsigned long mem_phys; - unsigned long port; - u32 msize; - u32 psize; - int ii; u8 cb_idx; int r = -ENODEV; u8 revision; @@ -1468,52 +1553,32 @@ mpt_attach(struct pci_dev *pdev, const struct pci_device_id *id) struct proc_dir_entry *dent, *ent; #endif - if (mpt_debug_level) - printk(KERN_INFO MYNAM ": mpt_debug_level=%xh\n", mpt_debug_level); - ioc = kzalloc(sizeof(MPT_ADAPTER), GFP_ATOMIC); if (ioc == NULL) { printk(KERN_ERR MYNAM ": ERROR - Insufficient memory to add adapter!\n"); return -ENOMEM; } - ioc->debug_level = mpt_debug_level; + ioc->id = mpt_ids++; sprintf(ioc->name, "ioc%d", ioc->id); - ioc->bars = pci_select_bars(pdev, IORESOURCE_MEM); - if (pci_enable_device_mem(pdev)) { - printk(MYIOC_s_ERR_FMT "pci_enable_device_mem() " - "failed\n", ioc->name); - kfree(ioc); - return r; - } - if (pci_request_selected_regions(pdev, ioc->bars, "mpt")) { - printk(MYIOC_s_ERR_FMT "pci_request_selected_regions() with " - "MEM failed\n", ioc->name); - kfree(ioc); - return r; - } + /* + * set initial debug level + * (refer to mptdebug.h) + * + */ + ioc->debug_level = mpt_debug_level; + if (mpt_debug_level) + printk(KERN_INFO "mpt_debug_level=%xh\n", mpt_debug_level); dinitprintk(ioc, printk(MYIOC_s_INFO_FMT ": mpt_adapter_install\n", ioc->name)); - if (!pci_set_dma_mask(pdev, DMA_64BIT_MASK)) { - dprintk(ioc, printk(MYIOC_s_INFO_FMT - ": 64 BIT PCI BUS DMA ADDRESSING SUPPORTED\n", ioc->name)); - } else if (pci_set_dma_mask(pdev, DMA_32BIT_MASK)) { - printk(MYIOC_s_WARN_FMT ": 32 BIT PCI BUS DMA ADDRESSING NOT SUPPORTED\n", - ioc->name); + ioc->pcidev = pdev; + if (mpt_mapresources(ioc)) { kfree(ioc); return r; } - if (!pci_set_consistent_dma_mask(pdev, DMA_64BIT_MASK)) { - dprintk(ioc, printk(MYIOC_s_INFO_FMT - ": Using 64 bit consistent mask\n", ioc->name)); - } else { - dprintk(ioc, printk(MYIOC_s_INFO_FMT - ": Not using 64 bit consistent mask\n", ioc->name)); - } - ioc->alloc_total = sizeof(MPT_ADAPTER); ioc->req_sz = MPT_DEFAULT_FRAME_SIZE; /* avoid div by zero! */ ioc->reply_sz = MPT_REPLY_FRAME_SIZE; @@ -1551,48 +1616,9 @@ mpt_attach(struct pci_dev *pdev, const struct pci_device_id *id) /* Find lookup slot. */ INIT_LIST_HEAD(&ioc->list); - mem_phys = msize = 0; - port = psize = 0; - for (ii=0; ii < DEVICE_COUNT_RESOURCE; ii++) { - if (pci_resource_flags(pdev, ii) & PCI_BASE_ADDRESS_SPACE_IO) { - if (psize) - continue; - /* Get I/O space! */ - port = pci_resource_start(pdev, ii); - psize = pci_resource_len(pdev,ii); - } else { - if (msize) - continue; - /* Get memmap */ - mem_phys = pci_resource_start(pdev, ii); - msize = pci_resource_len(pdev,ii); - } - } - ioc->mem_size = msize; - - mem = NULL; - /* Get logical ptr for PciMem0 space */ - /*mem = ioremap(mem_phys, msize);*/ - mem = ioremap(mem_phys, msize); - if (mem == NULL) { - printk(MYIOC_s_ERR_FMT "Unable to map adapter memory!\n", ioc->name); - kfree(ioc); - return -EINVAL; - } - ioc->memmap = mem; - dinitprintk(ioc, printk(MYIOC_s_INFO_FMT "mem = %p, mem_phys = %lx\n", ioc->name, mem, mem_phys)); - dinitprintk(ioc, printk(MYIOC_s_INFO_FMT "facts @ %p, pfacts[0] @ %p\n", ioc->name, &ioc->facts, &ioc->pfacts[0])); - ioc->mem_phys = mem_phys; - ioc->chip = (SYSIF_REGS __iomem *)mem; - - /* Save Port IO values in case we need to do downloadboot */ - ioc->pio_mem_phys = port; - pmem = (u8 __iomem *)port; - ioc->pio_chip = (SYSIF_REGS __iomem *)pmem; - pci_read_config_byte(pdev, PCI_CLASS_REVISION, &revision); mpt_get_product_name(pdev->vendor, pdev->device, revision, ioc->prod_name); @@ -1688,7 +1714,9 @@ mpt_attach(struct pci_dev *pdev, const struct pci_device_id *id) list_del(&ioc->list); if (ioc->alt_ioc) ioc->alt_ioc->alt_ioc = NULL; - iounmap(mem); + iounmap(ioc->memmap); + if (r != -5) + pci_release_selected_regions(pdev, ioc->bars); kfree(ioc); pci_set_drvdata(pdev, NULL); return r; @@ -1784,13 +1812,10 @@ mpt_suspend(struct pci_dev *pdev, pm_message_t state) u32 device_state; MPT_ADAPTER *ioc = pci_get_drvdata(pdev); - device_state=pci_choose_state(pdev, state); - - printk(MYIOC_s_INFO_FMT - "pci-suspend: pdev=0x%p, slot=%s, Entering operating state [D%d]\n", - ioc->name, pdev, pci_name(pdev), device_state); - - pci_save_state(pdev); + device_state = pci_choose_state(pdev, state); + printk(MYIOC_s_INFO_FMT "pci-suspend: pdev=0x%p, slot=%s, Entering " + "operating state [D%d]\n", ioc->name, pdev, pci_name(pdev), + device_state); /* put ioc into READY_STATE */ if(SendIocReset(ioc, MPI_FUNCTION_IOC_MESSAGE_UNIT_RESET, CAN_SLEEP)) { @@ -1805,10 +1830,14 @@ mpt_suspend(struct pci_dev *pdev, pm_message_t state) /* Clear any lingering interrupt */ CHIPREG_WRITE32(&ioc->chip->IntStatus, 0); + free_irq(ioc->pci_irq, ioc); + if (mpt_msi_enable) + pci_disable_msi(ioc->pcidev); + ioc->pci_irq = -1; + pci_save_state(pdev); pci_disable_device(pdev); pci_release_selected_regions(pdev, ioc->bars); pci_set_power_state(pdev, device_state); - return 0; } @@ -1823,48 +1852,54 @@ mpt_resume(struct pci_dev *pdev) MPT_ADAPTER *ioc = pci_get_drvdata(pdev); u32 device_state = pdev->current_state; int recovery_state; + int err; - printk(MYIOC_s_INFO_FMT - "pci-resume: pdev=0x%p, slot=%s, Previous operating state [D%d]\n", - ioc->name, pdev, pci_name(pdev), device_state); + printk(MYIOC_s_INFO_FMT "pci-resume: pdev=0x%p, slot=%s, Previous " + "operating state [D%d]\n", ioc->name, pdev, pci_name(pdev), + device_state); - pci_set_power_state(pdev, 0); + pci_set_power_state(pdev, PCI_D0); + pci_enable_wake(pdev, PCI_D0, 0); pci_restore_state(pdev); - if (ioc->facts.Flags & MPI_IOCFACTS_FLAGS_FW_DOWNLOAD_BOOT) { - ioc->bars = pci_select_bars(ioc->pcidev, IORESOURCE_MEM | - IORESOURCE_IO); - if (pci_enable_device(pdev)) - return 0; - } else { - ioc->bars = pci_select_bars(pdev, IORESOURCE_MEM); - if (pci_enable_device_mem(pdev)) - return 0; - } - if (pci_request_selected_regions(pdev, ioc->bars, "mpt")) - return 0; + ioc->pcidev = pdev; + err = mpt_mapresources(ioc); + if (err) + return err; - /* enable interrupts */ - CHIPREG_WRITE32(&ioc->chip->IntMask, MPI_HIM_DIM); - ioc->active = 1; + printk(MYIOC_s_INFO_FMT "pci-resume: ioc-state=0x%x,doorbell=0x%x\n", + ioc->name, (mpt_GetIocState(ioc, 1) >> MPI_IOC_STATE_SHIFT), + CHIPREG_READ32(&ioc->chip->Doorbell)); - printk(MYIOC_s_INFO_FMT - "pci-resume: ioc-state=0x%x,doorbell=0x%x\n", - ioc->name, - (mpt_GetIocState(ioc, 1) >> MPI_IOC_STATE_SHIFT), - CHIPREG_READ32(&ioc->chip->Doorbell)); + /* + * Errata workaround for SAS pci express: + * Upon returning to the D0 state, the contents of the doorbell will be + * stale data, and this will incorrectly signal to the host driver that + * the firmware is ready to process mpt commands. The workaround is + * to issue a diagnostic reset. + */ + if (ioc->bus_type == SAS && (pdev->device == + MPI_MANUFACTPAGE_DEVID_SAS1068E || pdev->device == + MPI_MANUFACTPAGE_DEVID_SAS1064E)) { + if (KickStart(ioc, 1, CAN_SLEEP) < 0) { + printk(MYIOC_s_WARN_FMT "pci-resume: Cannot recover\n", + ioc->name); + goto out; + } + } /* bring ioc to operational state */ - if ((recovery_state = mpt_do_ioc_recovery(ioc, - MPT_HOSTEVENT_IOC_RECOVER, CAN_SLEEP)) != 0) { - printk(MYIOC_s_INFO_FMT - "pci-resume: Cannot recover, error:[%x]\n", - ioc->name, recovery_state); - } else { + printk(MYIOC_s_INFO_FMT "Sending mpt_do_ioc_recovery\n", ioc->name); + recovery_state = mpt_do_ioc_recovery(ioc, MPT_HOSTEVENT_IOC_BRINGUP, + CAN_SLEEP); + if (recovery_state != 0) + printk(MYIOC_s_WARN_FMT "pci-resume: Cannot recover, " + "error:[%x]\n", ioc->name, recovery_state); + else printk(MYIOC_s_INFO_FMT - "pci-resume: success\n", ioc->name); - } - + "pci-resume: success\n", ioc->name); + out: return 0; + } #endif @@ -1903,6 +1938,7 @@ mpt_signal_reset(u8 index, MPT_ADAPTER *ioc, int reset_phase) * -3 if READY but PrimeIOCFifos Failed * -4 if READY but IOCInit Failed * -5 if failed to enable_device and/or request_selected_regions + * -6 if failed to upload firmware */ static int mpt_do_ioc_recovery(MPT_ADAPTER *ioc, u32 reason, int sleepFlag) @@ -2097,7 +2133,7 @@ mpt_do_ioc_recovery(MPT_ADAPTER *ioc, u32 reason, int sleepFlag) } else { printk(MYIOC_s_WARN_FMT "firmware upload failure!\n", ioc->name); - ret = -5; + ret = -6; } } } diff --git a/drivers/message/fusion/mptscsih.c b/drivers/message/fusion/mptscsih.c index 0c252f60c4c..c207bda6723 100644 --- a/drivers/message/fusion/mptscsih.c +++ b/drivers/message/fusion/mptscsih.c @@ -1170,6 +1170,10 @@ mptscsih_shutdown(struct pci_dev *pdev) int mptscsih_suspend(struct pci_dev *pdev, pm_message_t state) { + MPT_ADAPTER *ioc = pci_get_drvdata(pdev); + + scsi_block_requests(ioc->sh); + flush_scheduled_work(); mptscsih_shutdown(pdev); return mpt_suspend(pdev,state); } @@ -1183,7 +1187,12 @@ mptscsih_suspend(struct pci_dev *pdev, pm_message_t state) int mptscsih_resume(struct pci_dev *pdev) { - return mpt_resume(pdev); + MPT_ADAPTER *ioc = pci_get_drvdata(pdev); + int rc; + + rc = mpt_resume(pdev); + scsi_unblock_requests(ioc->sh); + return rc; } #endif -- cgit v1.2.3 From c02e600280c605c761190ef82a6e6fa6aa7fb248 Mon Sep 17 00:00:00 2001 From: Kay Sievers Date: Wed, 19 Mar 2008 13:09:56 +0100 Subject: [SCSI] sd, sr: do not emit change event at device add Initialize the "state changed" flag, so we do not send a change event immediately after registering a new device. Signed-off-by: Kay Sievers Signed-off-by: James Bottomley --- drivers/scsi/sd.c | 1 + drivers/scsi/sr.c | 1 + 2 files changed, 2 insertions(+) diff --git a/drivers/scsi/sd.c b/drivers/scsi/sd.c index 7aee64dbfbe..5fe7aaed904 100644 --- a/drivers/scsi/sd.c +++ b/drivers/scsi/sd.c @@ -1654,6 +1654,7 @@ static int sd_probe(struct device *dev) sdkp->disk = gd; sdkp->index = index; sdkp->openers = 0; + sdkp->previous_state = 1; if (!sdp->timeout) { if (sdp->type != TYPE_MOD) diff --git a/drivers/scsi/sr.c b/drivers/scsi/sr.c index 208565bdbe8..7ee86d4a761 100644 --- a/drivers/scsi/sr.c +++ b/drivers/scsi/sr.c @@ -623,6 +623,7 @@ static int sr_probe(struct device *dev) cd->disk = disk; cd->capacity = 0x1fffff; cd->device->changed = 1; /* force recheck CD type */ + cd->previous_state = 1; cd->use = 1; cd->readcd_known = 0; cd->readcd_cdda = 0; -- cgit v1.2.3 From 4d1566ed2100d074ccc654e5cf2e44cdea3a01d0 Mon Sep 17 00:00:00 2001 From: Kay Sievers Date: Wed, 19 Mar 2008 13:04:47 +0100 Subject: [SCSI] fix media change events for polled devices Commit: a341cd0f (SCSI: add asynchronous event notification API) breaks: 285e9670 (sr,sd: send media state change modification events) by introducing an event filter, which is removed here, to make events, we are depending on, happen again. Fix this by removing the event filter. It's pretty much broken at the moment, since a user can't set it (the attribute being read only). A proper fix will be to make the event discriminator distinguish between AN and Polled media change events. Cc: David Zeuthen Cc: kristen accardi Cc: Jeff Garzik Signed-off-by: Kay Sievers Signed-off-by: James Bottomley --- drivers/scsi/scsi_lib.c | 5 +++++ 1 file changed, 5 insertions(+) diff --git a/drivers/scsi/scsi_lib.c b/drivers/scsi/scsi_lib.c index ba21d97d185..f40898dc2d1 100644 --- a/drivers/scsi/scsi_lib.c +++ b/drivers/scsi/scsi_lib.c @@ -2162,10 +2162,15 @@ void sdev_evt_send(struct scsi_device *sdev, struct scsi_event *evt) { unsigned long flags; +#if 0 + /* FIXME: currently this check eliminates all media change events + * for polled devices. Need to update to discriminate between AN + * and polled events */ if (!test_bit(evt->evt_type, sdev->supported_events)) { kfree(evt); return; } +#endif spin_lock_irqsave(&sdev->list_lock, flags); list_add_tail(&evt->node, &sdev->event_list); -- cgit v1.2.3 From 28aef2f7d9415b881c9145ab9b2c1c234064a243 Mon Sep 17 00:00:00 2001 From: Akinobu Mita Date: Mon, 17 Mar 2008 21:32:02 +0900 Subject: [SCSI] a100u2w: fix bitmap lookup routine This patch is only compile tested. It seems that bitmap lookup routine for allocation_map in a100u2w driver is simply wrong. It cannot lookup more than first 32 bits. If all first 32 bits are set, it just returns 33-th orc_scb even though the 33-th bit is not set. Signed-off-by: Akinobu Mita Tested-by: Alan Cox Signed-off-by: James Bottomley --- drivers/scsi/a100u2w.c | 9 +++++---- 1 file changed, 5 insertions(+), 4 deletions(-) diff --git a/drivers/scsi/a100u2w.c b/drivers/scsi/a100u2w.c index f608d4a1d6d..792b2e807bf 100644 --- a/drivers/scsi/a100u2w.c +++ b/drivers/scsi/a100u2w.c @@ -674,12 +674,13 @@ static struct orc_scb *__orc_alloc_scb(struct orc_host * host) for (index = 0; index < 32; index++) { if ((host->allocation_map[channel][i] >> index) & 0x01) { host->allocation_map[channel][i] &= ~(1 << index); - break; + idx = index + 32 * i; + /* + * Translate the index to a structure instance + */ + return host->scb_virt + idx; } } - idx = index + 32 * i; - /* Translate the index to a structure instance */ - return (struct orc_scb *) ((unsigned long) host->scb_virt + (idx * sizeof(struct orc_scb))); } return NULL; } -- cgit v1.2.3