From 627ad9fd0733f0a31a266ff98a4a933eee710f0b Mon Sep 17 00:00:00 2001 From: Theodore Ts'o Date: Sat, 20 Jun 2009 23:21:41 -0400 Subject: ext4: Fix type warning on 64-bit platforms in tracing events header Signed-off-by: "Theodore Ts'o" --- include/trace/events/ext4.h | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/include/trace/events/ext4.h b/include/trace/events/ext4.h index acf4cc9cd36..b456fb0a3c5 100644 --- a/include/trace/events/ext4.h +++ b/include/trace/events/ext4.h @@ -34,7 +34,8 @@ TRACE_EVENT(ext4_free_inode, TP_printk("dev %s ino %lu mode %d uid %u gid %u blocks %llu", jbd2_dev_to_name(__entry->dev), __entry->ino, __entry->mode, - __entry->uid, __entry->gid, __entry->blocks) + __entry->uid, __entry->gid, + (unsigned long long) __entry->blocks) ); TRACE_EVENT(ext4_request_inode, -- cgit v1.2.3 From b574480507460b8e31b8d38dd4642219fc3b9a10 Mon Sep 17 00:00:00 2001 From: Theodore Ts'o Date: Sat, 20 Jun 2009 23:34:44 -0400 Subject: jbd2: Remove GFP_ATOMIC kmalloc from inside spinlock critical region Fix jbd2_dev_to_name(), a function used when pretty-printting jbd2 and ext4 tracepoints. Signed-off-by: "Theodore Ts'o" --- fs/jbd2/journal.c | 11 ++++++----- 1 file changed, 6 insertions(+), 5 deletions(-) diff --git a/fs/jbd2/journal.c b/fs/jbd2/journal.c index 18bfd5dab64..7b545c3b394 100644 --- a/fs/jbd2/journal.c +++ b/fs/jbd2/journal.c @@ -2410,6 +2410,7 @@ const char *jbd2_dev_to_name(dev_t device) int i = hash_32(device, CACHE_SIZE_BITS); char *ret; struct block_device *bd; + static struct devname_cache *new_dev; rcu_read_lock(); if (devcache[i] && devcache[i]->device == device) { @@ -2419,20 +2420,20 @@ const char *jbd2_dev_to_name(dev_t device) } rcu_read_unlock(); + new_dev = kmalloc(sizeof(struct devname_cache), GFP_KERNEL); + if (!new_dev) + return "NODEV-ALLOCFAILURE"; /* Something non-NULL */ spin_lock(&devname_cache_lock); if (devcache[i]) { if (devcache[i]->device == device) { + kfree(new_dev); ret = devcache[i]->devname; spin_unlock(&devname_cache_lock); return ret; } call_rcu(&devcache[i]->rcu, free_devcache); } - devcache[i] = kmalloc(sizeof(struct devname_cache), GFP_KERNEL); - if (!devcache[i]) { - spin_unlock(&devname_cache_lock); - return "NODEV-ALLOCFAILURE"; /* Something non-NULL */ - } + devcache[i] = new_dev; devcache[i]->device = device; bd = bdget(device); if (bd) { -- cgit v1.2.3 From f4a01017d678fe4baecf480e79d7c4f4b7ebc772 Mon Sep 17 00:00:00 2001 From: Theodore Ts'o Date: Sun, 5 Jul 2009 22:08:16 -0400 Subject: ext4: Fix potential reclaim deadlock when truncating partial block The ext4_block_truncate_page() function previously called grab_cache_page(), which called find_or_create_page() with the __GFP_FS flag potentially set. This could cause a deadlock if the system is low on memory and it attempts a memory reclaim, which could potentially call back into ext4. So we need to call find_or_create_page() directly, and remove the __GFP_FP flag to avoid this potential deadlock. Thanks to Roland Dreier for reporting a lockdep warning which showed this problem. [20786.363249] ================================= [20786.363257] [ INFO: inconsistent lock state ] [20786.363265] 2.6.31-2-generic #14~rbd4gitd960eea9 [20786.363270] --------------------------------- [20786.363276] inconsistent {IN-RECLAIM_FS-W} -> {RECLAIM_FS-ON-W} usage. [20786.363285] http/8397 [HC0[0]:SC0[0]:HE1:SE1] takes: [20786.363291] (jbd2_handle){+.+.?.}, at: [] jbd2_journal_start+0xdb/0x150 [20786.363314] {IN-RECLAIM_FS-W} state was registered at: [20786.363320] [] mark_irqflags+0xc6/0x1a0 [20786.363334] [] __lock_acquire+0x287/0x430 [20786.363345] [] lock_acquire+0xa5/0x150 [20786.363355] [] jbd2_journal_start+0xfa/0x150 [20786.363365] [] ext4_journal_start_sb+0x58/0x90 [20786.363377] [] ext4_delete_inode+0xc5/0x2c0 [20786.363389] [] generic_delete_inode+0xd3/0x1a0 [20786.363401] [] generic_drop_inode+0x25/0x30 [20786.363411] [] iput+0x62/0x70 [20786.363420] [] dentry_iput+0x98/0x110 [20786.363429] [] d_kill+0x50/0x80 [20786.363438] [] dput+0x95/0x180 [20786.363447] [] ecryptfs_d_release+0x2b/0x70 [20786.363459] [] d_free+0x28/0x60 [20786.363468] [] d_kill+0x68/0x80 [20786.363477] [] prune_one_dentry+0xa3/0xc0 [20786.363487] [] __shrink_dcache_sb+0x271/0x290 [20786.363497] [] prune_dcache+0x109/0x1b0 [20786.363506] [] shrink_dcache_memory+0x3f/0x50 [20786.363516] [] shrink_slab+0x12d/0x190 [20786.363527] [] balance_pgdat+0x4d7/0x640 [20786.363537] [] kswapd+0x117/0x170 [20786.363546] [] kthread+0x9e/0xb0 [20786.363558] [] child_rip+0xa/0x20 [20786.363569] [] 0xffffffffffffffff [20786.363598] irq event stamp: 15997 [20786.363603] hardirqs last enabled at (15997): [] kmem_cache_alloc+0xfd/0x1a0 [20786.363617] hardirqs last disabled at (15996): [] kmem_cache_alloc+0x61/0x1a0 [20786.363628] softirqs last enabled at (15966): [] __do_softirq+0x14a/0x220 [20786.363641] softirqs last disabled at (15861): [] call_softirq+0x1c/0x30 [20786.363651] [20786.363653] other info that might help us debug this: [20786.363660] 3 locks held by http/8397: [20786.363665] #0: (&sb->s_type->i_mutex_key#8){+.+.+.}, at: [] do_truncate+0x64/0x90 [20786.363685] #1: (&sb->s_type->i_alloc_sem_key#5){+++++.}, at: [] notify_change+0x250/0x350 [20786.363707] #2: (jbd2_handle){+.+.?.}, at: [] jbd2_journal_start+0xdb/0x150 [20786.363724] [20786.363726] stack backtrace: [20786.363734] Pid: 8397, comm: http Tainted: G C 2.6.31-2-generic #14~rbd4gitd960eea9 [20786.363741] Call Trace: [20786.363752] [] print_usage_bug+0x18c/0x1a0 [20786.363763] [] ? check_usage_backwards+0x0/0xb0 [20786.363773] [] mark_lock_irq+0xf2/0x280 [20786.363783] [] mark_lock+0x137/0x1d0 [20786.363793] [] mark_held_locks+0x6c/0xa0 [20786.363803] [] lockdep_trace_alloc+0xaf/0xe0 [20786.363813] [] __alloc_pages_nodemask+0x7c/0x180 [20786.363824] [] ? find_get_page+0x91/0xf0 [20786.363835] [] alloc_pages_current+0x87/0xd0 [20786.363845] [] __page_cache_alloc+0x67/0x70 [20786.363856] [] find_or_create_page+0x4f/0xb0 [20786.363867] [] ext4_block_truncate_page+0x3e/0x460 [20786.363876] [] ? jbd2_journal_start+0xfa/0x150 [20786.363885] [] ? jbd2_journal_start+0xdb/0x150 [20786.363895] [] ? ext4_meta_trans_blocks+0x75/0xf0 [20786.363905] [] ext4_ext_truncate+0x1bb/0x1e0 [20786.363916] [] ? unmap_mapping_range+0x75/0x290 [20786.363926] [] ext4_truncate+0x498/0x630 [20786.363938] [] ? _raw_spin_unlock+0x5e/0xb0 [20786.363947] [] ? unmap_mapping_range+0xb6/0x290 [20786.363957] [] ? trace_hardirqs_on+0xd/0x10 [20786.363966] [] ? jbd2_journal_stop+0x1f8/0x2e0 [20786.363976] [] vmtruncate+0xb0/0x110 [20786.363986] [] inode_setattr+0x35/0x170 [20786.363995] [] ext4_setattr+0x186/0x370 [20786.364005] [] notify_change+0x16b/0x350 [20786.364014] [] do_truncate+0x70/0x90 [20786.364021] [] T.657+0xeb/0x110 [20786.364021] [] sys_ftruncate+0xe/0x10 [20786.364021] [] system_call_fastpath+0x16/0x1b Reported-by: Roland Dreier Signed-off-by: "Theodore Ts'o" --- fs/ext4/inode.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/fs/ext4/inode.c b/fs/ext4/inode.c index 60a26f3a6f8..9760ba09275 100644 --- a/fs/ext4/inode.c +++ b/fs/ext4/inode.c @@ -3583,7 +3583,8 @@ int ext4_block_truncate_page(handle_t *handle, struct page *page; int err = 0; - page = grab_cache_page(mapping, from >> PAGE_CACHE_SHIFT); + page = find_or_create_page(mapping, from >> PAGE_CACHE_SHIFT, + mapping_gfp_mask(mapping) & ~__GFP_FS); if (!page) return -EINVAL; -- cgit v1.2.3 From 089ceecc1ea4a69ed8bcc5c7c7b96ce487e26b33 Mon Sep 17 00:00:00 2001 From: Eric Sandeen Date: Sun, 5 Jul 2009 22:17:31 -0400 Subject: ext4: mark several more functions in mballoc.c as noinline Ted noticed a stack-deep callchain through writepages->ext4_mb_regular_allocator->ext4_mb_init_cache->submit_bh ... With all the static functions in mballoc.c, gcc helpfully inlines for us, and we get something like this: ext4_mb_regular_allocator (232 bytes stack) ext4_mb_init_cache (232 bytes stack) submit_bh (starts 464 deeper) the 2 ext4 functions here get several others inlined; by telling gcc not to inline them, we can save stack space for when we head off into submit_bh land and associated block layer callchains. The following noinlined functions are only called once, so this won't impact any other callchains: ext4_mb_regular_allocator (104) (was 232) ext4_mb_find_by_goal (56) (noinlined) ext4_mb_init_group (24) (noinlined) ext4_mb_init_cache (136) (was 232) ext4_mb_generate_buddy (88) (noinlined) ext4_mb_generate_from_pa (40) (noinlined) submit_bh ext4_mb_simple_scan_group (24) (noinlined) ext4_mb_scan_aligned (56) (noinlined) ext4_mb_complex_scan_group (40) (noinlined) ext4_mb_try_best_found (24) (noinlined) now when we head off into submit_bh() we're only 264 bytes deeper in stack than when we entered ext4_mb_regular_allocator() (vs. 464 bytes before). Every 200 bytes helps. :) Signed-off-by: Eric Sandeen Signed-off-by: "Theodore Ts'o" --- fs/ext4/mballoc.c | 24 ++++++++++++++++-------- 1 file changed, 16 insertions(+), 8 deletions(-) diff --git a/fs/ext4/mballoc.c b/fs/ext4/mballoc.c index 519a0a686d9..4a45efabb20 100644 --- a/fs/ext4/mballoc.c +++ b/fs/ext4/mballoc.c @@ -657,7 +657,8 @@ static void ext4_mb_mark_free_simple(struct super_block *sb, } } -static void ext4_mb_generate_buddy(struct super_block *sb, +static noinline_for_stack +void ext4_mb_generate_buddy(struct super_block *sb, void *buddy, void *bitmap, ext4_group_t group) { struct ext4_group_info *grp = ext4_get_group_info(sb, group); @@ -1480,7 +1481,8 @@ static void ext4_mb_measure_extent(struct ext4_allocation_context *ac, ext4_mb_check_limits(ac, e4b, 0); } -static int ext4_mb_try_best_found(struct ext4_allocation_context *ac, +static noinline_for_stack +int ext4_mb_try_best_found(struct ext4_allocation_context *ac, struct ext4_buddy *e4b) { struct ext4_free_extent ex = ac->ac_b_ex; @@ -1507,7 +1509,8 @@ static int ext4_mb_try_best_found(struct ext4_allocation_context *ac, return 0; } -static int ext4_mb_find_by_goal(struct ext4_allocation_context *ac, +static noinline_for_stack +int ext4_mb_find_by_goal(struct ext4_allocation_context *ac, struct ext4_buddy *e4b) { ext4_group_t group = ac->ac_g_ex.fe_group; @@ -1566,7 +1569,8 @@ static int ext4_mb_find_by_goal(struct ext4_allocation_context *ac, * The routine scans buddy structures (not bitmap!) from given order * to max order and tries to find big enough chunk to satisfy the req */ -static void ext4_mb_simple_scan_group(struct ext4_allocation_context *ac, +static noinline_for_stack +void ext4_mb_simple_scan_group(struct ext4_allocation_context *ac, struct ext4_buddy *e4b) { struct super_block *sb = ac->ac_sb; @@ -1609,7 +1613,8 @@ static void ext4_mb_simple_scan_group(struct ext4_allocation_context *ac, * In order to optimize scanning, caller must pass number of * free blocks in the group, so the routine can know upper limit. */ -static void ext4_mb_complex_scan_group(struct ext4_allocation_context *ac, +static noinline_for_stack +void ext4_mb_complex_scan_group(struct ext4_allocation_context *ac, struct ext4_buddy *e4b) { struct super_block *sb = ac->ac_sb; @@ -1668,7 +1673,8 @@ static void ext4_mb_complex_scan_group(struct ext4_allocation_context *ac, * we try to find stripe-aligned chunks for stripe-size requests * XXX should do so at least for multiples of stripe size as well */ -static void ext4_mb_scan_aligned(struct ext4_allocation_context *ac, +static noinline_for_stack +void ext4_mb_scan_aligned(struct ext4_allocation_context *ac, struct ext4_buddy *e4b) { struct super_block *sb = ac->ac_sb; @@ -1831,7 +1837,8 @@ void ext4_mb_put_buddy_cache_lock(struct super_block *sb, } -static int ext4_mb_init_group(struct super_block *sb, ext4_group_t group) +static noinline_for_stack +int ext4_mb_init_group(struct super_block *sb, ext4_group_t group) { int ret; @@ -3457,7 +3464,8 @@ static void ext4_mb_generate_from_freelist(struct super_block *sb, void *bitmap, * used in in-core bitmap. buddy must be generated from this bitmap * Need to be called with ext4 group lock held */ -static void ext4_mb_generate_from_pa(struct super_block *sb, void *bitmap, +static noinline_for_stack +void ext4_mb_generate_from_pa(struct super_block *sb, void *bitmap, ext4_group_t group) { struct ext4_group_info *grp = ext4_get_group_info(sb, group); -- cgit v1.2.3 From 726447d803802cd0be8f62d17c4a34421781b938 Mon Sep 17 00:00:00 2001 From: Eric Sandeen Date: Mon, 13 Jul 2009 10:24:17 -0400 Subject: ext4: naturally align struct ext4_allocation_request As Ted noted, the ext4_allocation_request isn't well aligned. Looking at it with pahole we're wasting space on 64-bit arches: struct ext4_allocation_request { struct inode * inode; /* 0 8 */ ext4_lblk_t logical; /* 8 4 */ /* XXX 4 bytes hole, try to pack */ ext4_fsblk_t goal; /* 16 8 */ ext4_lblk_t lleft; /* 24 4 */ /* XXX 4 bytes hole, try to pack */ ext4_fsblk_t pleft; /* 32 8 */ ext4_lblk_t lright; /* 40 4 */ /* XXX 4 bytes hole, try to pack */ ext4_fsblk_t pright; /* 48 8 */ unsigned int len; /* 56 4 */ unsigned int flags; /* 60 4 */ /* --- cacheline 1 boundary (64 bytes) --- */ /* size: 64, cachelines: 1, members: 9 */ /* sum members: 52, holes: 3, sum holes: 12 */ }; Grouping 32-bit members together closes these holes and shrinks the structure by 12 bytes. which is important since ext4 can get on the hairy edge of stack overruns. Signed-off-by: Eric Sandeen Signed-off-by: "Theodore Ts'o" --- fs/ext4/ext4.h | 14 +++++++------- 1 file changed, 7 insertions(+), 7 deletions(-) diff --git a/fs/ext4/ext4.h b/fs/ext4/ext4.h index 0ddf7e55abe..9714db393ef 100644 --- a/fs/ext4/ext4.h +++ b/fs/ext4/ext4.h @@ -93,20 +93,20 @@ typedef unsigned int ext4_group_t; struct ext4_allocation_request { /* target inode for block we're allocating */ struct inode *inode; + /* how many blocks we want to allocate */ + unsigned int len; /* logical block in target inode */ ext4_lblk_t logical; - /* phys. target (a hint) */ - ext4_fsblk_t goal; /* the closest logical allocated block to the left */ ext4_lblk_t lleft; - /* phys. block for ^^^ */ - ext4_fsblk_t pleft; /* the closest logical allocated block to the right */ ext4_lblk_t lright; - /* phys. block for ^^^ */ + /* phys. target (a hint) */ + ext4_fsblk_t goal; + /* phys. block for the closest logical allocated block to the left */ + ext4_fsblk_t pleft; + /* phys. block for the closest logical allocated block to the right */ ext4_fsblk_t pright; - /* how many blocks we want to allocate */ - unsigned int len; /* flags. see above EXT4_MB_HINT_* */ unsigned int flags; }; -- cgit v1.2.3 From 3e03f9ca6a2599db1823bb0ea24e0845219a0e69 Mon Sep 17 00:00:00 2001 From: Jesper Dangaard Brouer Date: Sun, 5 Jul 2009 22:29:27 -0400 Subject: ext4: Use rcu_barrier() on module unload. The ext4 module uses rcu_call() thus it should use rcu_barrier()on module unload. The kmem cache ext4_pspace_cachep is sometimes free'ed using call_rcu() callbacks. Thus, we must wait for completion of call_rcu() before doing kmem_cache_destroy(). Signed-off-by: Jesper Dangaard Brouer Signed-off-by: "Theodore Ts'o" --- fs/ext4/mballoc.c | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-) diff --git a/fs/ext4/mballoc.c b/fs/ext4/mballoc.c index 4a45efabb20..2fcaf286f1d 100644 --- a/fs/ext4/mballoc.c +++ b/fs/ext4/mballoc.c @@ -2909,7 +2909,11 @@ int __init init_ext4_mballoc(void) void exit_ext4_mballoc(void) { - /* XXX: synchronize_rcu(); */ + /* + * Wait for completion of call_rcu()'s on ext4_pspace_cachep + * before destroying the slab cache. + */ + rcu_barrier(); kmem_cache_destroy(ext4_pspace_cachep); kmem_cache_destroy(ext4_ac_cachep); kmem_cache_destroy(ext4_free_ext_cachep); -- cgit v1.2.3 From f91d1d04171026e56c7e343ee3cdcc801dd85cfb Mon Sep 17 00:00:00 2001 From: Jan Kara Date: Mon, 13 Jul 2009 16:16:20 -0400 Subject: jbd2: Fix a race between checkpointing code and journal_get_write_access() The following race can happen: CPU1 CPU2 checkpointing code checks the buffer, adds it to an array for writeback do_get_write_access() ... lock_buffer() unlock_buffer() flush_batch() submits the buffer for IO __jbd2_journal_file_buffer() So a buffer under writeout is returned from do_get_write_access(). Since the filesystem code relies on the fact that journaled buffers cannot be written out, it does not take the buffer lock and so it can modify buffer while it is under writeout. That can lead to a filesystem corruption if we crash at the right moment. We fix the problem by clearing the buffer dirty bit under buffer_lock even if the buffer is on BJ_None list. Actually, we clear the dirty bit regardless the list the buffer is in and warn about the fact if the buffer is already journalled. Thanks for spotting the problem goes to dingdinghua . Reported-by: dingdinghua Signed-off-by: Jan Kara Signed-off-by: "Theodore Ts'o" --- fs/jbd2/transaction.c | 68 ++++++++++++++++++++++++++------------------------- 1 file changed, 35 insertions(+), 33 deletions(-) diff --git a/fs/jbd2/transaction.c b/fs/jbd2/transaction.c index 494501edba6..6213ac728f3 100644 --- a/fs/jbd2/transaction.c +++ b/fs/jbd2/transaction.c @@ -499,34 +499,15 @@ void jbd2_journal_unlock_updates (journal_t *journal) wake_up(&journal->j_wait_transaction_locked); } -/* - * Report any unexpected dirty buffers which turn up. Normally those - * indicate an error, but they can occur if the user is running (say) - * tune2fs to modify the live filesystem, so we need the option of - * continuing as gracefully as possible. # - * - * The caller should already hold the journal lock and - * j_list_lock spinlock: most callers will need those anyway - * in order to probe the buffer's journaling state safely. - */ -static void jbd_unexpected_dirty_buffer(struct journal_head *jh) +static void warn_dirty_buffer(struct buffer_head *bh) { - int jlist; - - /* If this buffer is one which might reasonably be dirty - * --- ie. data, or not part of this journal --- then - * we're OK to leave it alone, but otherwise we need to - * move the dirty bit to the journal's own internal - * JBDDirty bit. */ - jlist = jh->b_jlist; + char b[BDEVNAME_SIZE]; - if (jlist == BJ_Metadata || jlist == BJ_Reserved || - jlist == BJ_Shadow || jlist == BJ_Forget) { - struct buffer_head *bh = jh2bh(jh); - - if (test_clear_buffer_dirty(bh)) - set_buffer_jbddirty(bh); - } + printk(KERN_WARNING + "JBD: Spotted dirty metadata buffer (dev = %s, blocknr = %llu). " + "There's a risk of filesystem corruption in case of system " + "crash.\n", + bdevname(bh->b_bdev, b), (unsigned long long)bh->b_blocknr); } /* @@ -593,14 +574,16 @@ repeat: if (jh->b_next_transaction) J_ASSERT_JH(jh, jh->b_next_transaction == transaction); + warn_dirty_buffer(bh); } /* * In any case we need to clean the dirty flag and we must * do it under the buffer lock to be sure we don't race * with running write-out. */ - JBUFFER_TRACE(jh, "Unexpected dirty buffer"); - jbd_unexpected_dirty_buffer(jh); + JBUFFER_TRACE(jh, "Journalling dirty buffer"); + clear_buffer_dirty(bh); + set_buffer_jbddirty(bh); } unlock_buffer(bh); @@ -843,6 +826,15 @@ int jbd2_journal_get_create_access(handle_t *handle, struct buffer_head *bh) J_ASSERT_JH(jh, buffer_locked(jh2bh(jh))); if (jh->b_transaction == NULL) { + /* + * Previous jbd2_journal_forget() could have left the buffer + * with jbddirty bit set because it was being committed. When + * the commit finished, we've filed the buffer for + * checkpointing and marked it dirty. Now we are reallocating + * the buffer so the transaction freeing it must have + * committed and so it's safe to clear the dirty bit. + */ + clear_buffer_dirty(jh2bh(jh)); jh->b_transaction = transaction; /* first access by this transaction */ @@ -1644,8 +1636,13 @@ static int __dispose_buffer(struct journal_head *jh, transaction_t *transaction) if (jh->b_cp_transaction) { JBUFFER_TRACE(jh, "on running+cp transaction"); + /* + * We don't want to write the buffer anymore, clear the + * bit so that we don't confuse checks in + * __journal_file_buffer + */ + clear_buffer_dirty(bh); __jbd2_journal_file_buffer(jh, transaction, BJ_Forget); - clear_buffer_jbddirty(bh); may_free = 0; } else { JBUFFER_TRACE(jh, "on running transaction"); @@ -1896,12 +1893,17 @@ void __jbd2_journal_file_buffer(struct journal_head *jh, if (jh->b_transaction && jh->b_jlist == jlist) return; - /* The following list of buffer states needs to be consistent - * with __jbd_unexpected_dirty_buffer()'s handling of dirty - * state. */ - if (jlist == BJ_Metadata || jlist == BJ_Reserved || jlist == BJ_Shadow || jlist == BJ_Forget) { + /* + * For metadata buffers, we track dirty bit in buffer_jbddirty + * instead of buffer_dirty. We should not see a dirty bit set + * here because we clear it in do_get_write_access but e.g. + * tune2fs can modify the sb and set the dirty bit at any time + * so we try to gracefully handle that. + */ + if (buffer_dirty(bh)) + warn_dirty_buffer(bh); if (test_clear_buffer_dirty(bh) || test_clear_buffer_jbddirty(bh)) was_dirty = 1; -- cgit v1.2.3 From ffacfa7a79d6c00624196b2d13b0a7f72f2b8227 Mon Sep 17 00:00:00 2001 From: Jan Kara Date: Mon, 13 Jul 2009 16:22:22 -0400 Subject: ext4: Fix truncation of symlinks after failed write Contents of long symlinks is written via standard write methods. So when the write fails, we add inode to orphan list. But symlinks don't have .truncate method defined so nobody properly removes them from the on disk orphan list. Fix this by calling ext4_truncate() directly instead of calling vmtruncate() (which is saner anyway since we don't need anything vmtruncate() does except from calling .truncate in these paths). We also add inode to orphan list only if ext4_can_truncate() is true (currently, it can be false for symlinks when there are no blocks allocated) - otherwise orphan list processing will complain and ext4_truncate() will not remove inode from on-disk orphan list. Signed-off-by: Jan Kara Signed-off-by: "Theodore Ts'o" --- fs/ext4/inode.c | 26 +++++++++++++------------- 1 file changed, 13 insertions(+), 13 deletions(-) diff --git a/fs/ext4/inode.c b/fs/ext4/inode.c index 9760ba09275..ff2afc1909b 100644 --- a/fs/ext4/inode.c +++ b/fs/ext4/inode.c @@ -1513,14 +1513,14 @@ retry: * Add inode to orphan list in case we crash before * truncate finishes */ - if (pos + len > inode->i_size) + if (pos + len > inode->i_size && ext4_can_truncate(inode)) ext4_orphan_add(handle, inode); ext4_journal_stop(handle); if (pos + len > inode->i_size) { - vmtruncate(inode, inode->i_size); + ext4_truncate(inode); /* - * If vmtruncate failed early the inode might + * If truncate failed early the inode might * still be on the orphan list; we need to * make sure the inode is removed from the * orphan list in that case. @@ -1614,7 +1614,7 @@ static int ext4_ordered_write_end(struct file *file, ret2 = ext4_generic_write_end(file, mapping, pos, len, copied, page, fsdata); copied = ret2; - if (pos + len > inode->i_size) + if (pos + len > inode->i_size && ext4_can_truncate(inode)) /* if we have allocated more blocks and copied * less. We will have blocks allocated outside * inode->i_size. So truncate them @@ -1628,9 +1628,9 @@ static int ext4_ordered_write_end(struct file *file, ret = ret2; if (pos + len > inode->i_size) { - vmtruncate(inode, inode->i_size); + ext4_truncate(inode); /* - * If vmtruncate failed early the inode might still be + * If truncate failed early the inode might still be * on the orphan list; we need to make sure the inode * is removed from the orphan list in that case. */ @@ -1655,7 +1655,7 @@ static int ext4_writeback_write_end(struct file *file, ret2 = ext4_generic_write_end(file, mapping, pos, len, copied, page, fsdata); copied = ret2; - if (pos + len > inode->i_size) + if (pos + len > inode->i_size && ext4_can_truncate(inode)) /* if we have allocated more blocks and copied * less. We will have blocks allocated outside * inode->i_size. So truncate them @@ -1670,9 +1670,9 @@ static int ext4_writeback_write_end(struct file *file, ret = ret2; if (pos + len > inode->i_size) { - vmtruncate(inode, inode->i_size); + ext4_truncate(inode); /* - * If vmtruncate failed early the inode might still be + * If truncate failed early the inode might still be * on the orphan list; we need to make sure the inode * is removed from the orphan list in that case. */ @@ -1722,7 +1722,7 @@ static int ext4_journalled_write_end(struct file *file, unlock_page(page); page_cache_release(page); - if (pos + len > inode->i_size) + if (pos + len > inode->i_size && ext4_can_truncate(inode)) /* if we have allocated more blocks and copied * less. We will have blocks allocated outside * inode->i_size. So truncate them @@ -1733,9 +1733,9 @@ static int ext4_journalled_write_end(struct file *file, if (!ret) ret = ret2; if (pos + len > inode->i_size) { - vmtruncate(inode, inode->i_size); + ext4_truncate(inode); /* - * If vmtruncate failed early the inode might still be + * If truncate failed early the inode might still be * on the orphan list; we need to make sure the inode * is removed from the orphan list in that case. */ @@ -2907,7 +2907,7 @@ retry: * i_size_read because we hold i_mutex. */ if (pos + len > inode->i_size) - vmtruncate(inode, inode->i_size); + ext4_truncate(inode); } if (ret == -ENOSPC && ext4_should_retry_alloc(inode->i_sb, &retries)) -- cgit v1.2.3 From 5887e98b609e96ce61ee0528cf94a2bfdc809dd7 Mon Sep 17 00:00:00 2001 From: "Aneesh Kumar K.V" Date: Sun, 5 Jul 2009 23:12:04 -0400 Subject: ext4: Calculate required journal credits for inserting an extent properly When we have space in the extent tree leaf node we should be able to insert the extent with much less journal credits. The code was doing proper calculation but missed a return statement. Reported-by: Andreas Dilger Signed-off-by: Aneesh Kumar K.V Signed-off-by: "Theodore Ts'o" --- fs/ext4/extents.c | 1 + 1 file changed, 1 insertion(+) diff --git a/fs/ext4/extents.c b/fs/ext4/extents.c index 50322a09bd0..73ebfb44ad7 100644 --- a/fs/ext4/extents.c +++ b/fs/ext4/extents.c @@ -1977,6 +1977,7 @@ int ext4_ext_calc_credits_for_single_extent(struct inode *inode, int nrblocks, */ /* 1 bitmap, 1 block group descriptor */ ret = 2 + EXT4_META_TRANS_BLOCKS(inode->i_sb); + return ret; } } -- cgit v1.2.3 From 5adfee9c17314c1411095c23191c3cb0c2d25f9f Mon Sep 17 00:00:00 2001 From: Theodore Ts'o Date: Wed, 8 Jul 2009 17:11:24 -0400 Subject: ext4: fix no journal corruption with locale-gen If there is no journal, ext4_should_writeback_data() should return TRUE. This will fix ext4_set_aops() to set ext4_da_ops in the case of delayed allocation; otherwise ext4_journaled_aops gets used by default, which doesn't handle delayed allocation properly. The advantage of using ext4_should_writeback_data() approach is that it should handle nobh better as well. Thanks to Curt Wohlgemuth for investigating this problem, and Aneesh Kumar for suggesting this approach. Signed-off-by: "Theodore Ts'o" --- fs/ext4/ext4_jbd2.h | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/fs/ext4/ext4_jbd2.h b/fs/ext4/ext4_jbd2.h index be2f426f680..d574a85aca5 100644 --- a/fs/ext4/ext4_jbd2.h +++ b/fs/ext4/ext4_jbd2.h @@ -281,10 +281,10 @@ static inline int ext4_should_order_data(struct inode *inode) static inline int ext4_should_writeback_data(struct inode *inode) { - if (EXT4_JOURNAL(inode) == NULL) - return 0; if (!S_ISREG(inode->i_mode)) return 0; + if (EXT4_JOURNAL(inode) == NULL) + return 1; if (EXT4_I(inode)->i_flags & EXT4_JOURNAL_DATA_FL) return 0; if (test_opt(inode->i_sb, DATA_FLAGS) == EXT4_MOUNT_WRITEBACK_DATA) -- cgit v1.2.3 From e6462869e4fd88be5141a356ee0c28d8067340cc Mon Sep 17 00:00:00 2001 From: Johann Lombardi Date: Sun, 5 Jul 2009 23:45:11 -0400 Subject: ext4: Fix goal inum check in the inode allocator The goal inode is specificed by inode number which belongs to [1; s_inodes_count]. Signed-off-by: Johann Lombardi Signed-off-by: "Theodore Ts'o" --- fs/ext4/ialloc.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/fs/ext4/ialloc.c b/fs/ext4/ialloc.c index 2f645732e3b..29e6dc7299b 100644 --- a/fs/ext4/ialloc.c +++ b/fs/ext4/ialloc.c @@ -833,7 +833,7 @@ struct inode *ext4_new_inode(handle_t *handle, struct inode *dir, int mode, if (!goal) goal = sbi->s_inode_goal; - if (goal && goal < le32_to_cpu(sbi->s_es->s_inodes_count)) { + if (goal && goal <= le32_to_cpu(sbi->s_es->s_inodes_count)) { group = (goal - 1) / EXT4_INODES_PER_GROUP(sb); ino = (goal - 1) % EXT4_INODES_PER_GROUP(sb); ret2 = 0; -- cgit v1.2.3 From b767e78a179e5ab30fdbff1686d074ac270471eb Mon Sep 17 00:00:00 2001 From: "Aneesh Kumar K.V" Date: Thu, 4 Jun 2009 08:06:06 -0400 Subject: ext4: Don't look at buffer_heads outside i_size. Buffer heads outside i_size will be unmapped. So when we are doing "walk_page_buffers" limit ourself to i_size. Signed-off-by: Aneesh Kumar K.V Reviewed-by: Josef Bacik Acked-by: Jan Kara Signed-off-by: "Theodore Ts'o" ---- --- fs/ext4/inode.c | 28 ++++++++++++++++------------ 1 file changed, 16 insertions(+), 12 deletions(-) diff --git a/fs/ext4/inode.c b/fs/ext4/inode.c index ff2afc1909b..b87b68cd324 100644 --- a/fs/ext4/inode.c +++ b/fs/ext4/inode.c @@ -2578,7 +2578,7 @@ static int ext4_da_writepage(struct page *page, * all are mapped and non delay. We don't want to * do block allocation here. */ - ret = block_prepare_write(page, 0, PAGE_CACHE_SIZE, + ret = block_prepare_write(page, 0, len, noalloc_get_block_write); if (!ret) { page_bufs = page_buffers(page); @@ -2600,7 +2600,7 @@ static int ext4_da_writepage(struct page *page, return 0; } /* now mark the buffer_heads as dirty and uptodate */ - block_commit_write(page, 0, PAGE_CACHE_SIZE); + block_commit_write(page, 0, len); } if (test_opt(inode->i_sb, NOBH) && ext4_should_writeback_data(inode)) @@ -3246,6 +3246,8 @@ static int ext4_normal_writepage(struct page *page, static int __ext4_journalled_writepage(struct page *page, struct writeback_control *wbc) { + loff_t size; + unsigned int len; struct address_space *mapping = page->mapping; struct inode *inode = mapping->host; struct buffer_head *page_bufs; @@ -3253,14 +3255,17 @@ static int __ext4_journalled_writepage(struct page *page, int ret = 0; int err; - ret = block_prepare_write(page, 0, PAGE_CACHE_SIZE, - noalloc_get_block_write); + size = i_size_read(inode); + if (page->index == size >> PAGE_CACHE_SHIFT) + len = size & ~PAGE_CACHE_MASK; + else + len = PAGE_CACHE_SIZE; + ret = block_prepare_write(page, 0, len, noalloc_get_block_write); if (ret != 0) goto out_unlock; page_bufs = page_buffers(page); - walk_page_buffers(handle, page_bufs, 0, PAGE_CACHE_SIZE, NULL, - bget_one); + walk_page_buffers(handle, page_bufs, 0, len, NULL, bget_one); /* As soon as we unlock the page, it can go away, but we have * references to buffers so we are safe */ unlock_page(page); @@ -3271,19 +3276,18 @@ static int __ext4_journalled_writepage(struct page *page, goto out; } - ret = walk_page_buffers(handle, page_bufs, 0, - PAGE_CACHE_SIZE, NULL, do_journal_get_write_access); + ret = walk_page_buffers(handle, page_bufs, 0, len, NULL, + do_journal_get_write_access); - err = walk_page_buffers(handle, page_bufs, 0, - PAGE_CACHE_SIZE, NULL, write_end_fn); + err = walk_page_buffers(handle, page_bufs, 0, len, NULL, + write_end_fn); if (ret == 0) ret = err; err = ext4_journal_stop(handle); if (!ret) ret = err; - walk_page_buffers(handle, page_bufs, 0, - PAGE_CACHE_SIZE, NULL, bput_one); + walk_page_buffers(handle, page_bufs, 0, len, NULL, bput_one); EXT4_I(inode)->i_state |= EXT4_STATE_JDATA; goto out; -- cgit v1.2.3 From c364b22c9580a885e0f8c0d0f9710d67dc448958 Mon Sep 17 00:00:00 2001 From: "Aneesh Kumar K.V" Date: Sun, 14 Jun 2009 17:57:10 -0400 Subject: ext4: Fix mmap/truncate race when blocksize < pagesize && delayed allocation It is possible to see buffer_heads which are not mapped in the writepage callback in the following scneario (where the fs blocksize is 1k and the page size is 4k): 1) truncate(f, 1024) 2) mmap(f, 0, 4096) 3) a[0] = 'a' 4) truncate(f, 4096) 5) writepage(...) Now if we get a writepage callback immediately after (4) and before an attempt to write at any other offset via mmap address (which implies we are yet to get a pagefault and do a get_block) what we would have is the page which is dirty have first block allocated and the other three buffer_heads unmapped. In the above case the writepage should go ahead and try to write the first blocks and clear the page_dirty flag. Further attempts to write to the page will again create a fault and result in allocating blocks and marking page dirty. If we don't write any other offset via mmap address we would still have written the first block to the disk and rest of the space will be considered as a hole. So to address this, we change all of the places where we look for delayed, unmapped, or unwritten buffer heads, and only check for delayed or unwritten buffer heads instead. Signed-off-by: Aneesh Kumar K.V Acked-by: Jan Kara Signed-off-by: "Theodore Ts'o" --- fs/ext4/inode.c | 23 ++++++++--------------- 1 file changed, 8 insertions(+), 15 deletions(-) diff --git a/fs/ext4/inode.c b/fs/ext4/inode.c index b87b68cd324..1275f34589c 100644 --- a/fs/ext4/inode.c +++ b/fs/ext4/inode.c @@ -2305,15 +2305,9 @@ flush_it: return; } -static int ext4_bh_unmapped_or_delay(handle_t *handle, struct buffer_head *bh) +static int ext4_bh_delay_or_unwritten(handle_t *handle, struct buffer_head *bh) { - /* - * unmapped buffer is possible for holes. - * delay buffer is possible with delayed allocation. - * We also need to consider unwritten buffer as unmapped. - */ - return (!buffer_mapped(bh) || buffer_delay(bh) || - buffer_unwritten(bh)) && buffer_dirty(bh); + return (buffer_delay(bh) || buffer_unwritten(bh)) && buffer_dirty(bh); } /* @@ -2400,7 +2394,7 @@ static int __mpage_da_writepage(struct page *page, * Otherwise we won't make progress * with the page in ext4_da_writepage */ - if (ext4_bh_unmapped_or_delay(NULL, bh)) { + if (ext4_bh_delay_or_unwritten(NULL, bh)) { mpage_add_bh_to_extent(mpd, logical, bh->b_size, bh->b_state); @@ -2517,7 +2511,6 @@ static int noalloc_get_block_write(struct inode *inode, sector_t iblock, * so call get_block_wrap with create = 0 */ ret = ext4_get_blocks(NULL, inode, iblock, max_blocks, bh_result, 0); - BUG_ON(create && ret == 0); if (ret > 0) { bh_result->b_size = (ret << inode->i_blkbits); ret = 0; @@ -2533,7 +2526,7 @@ static int noalloc_get_block_write(struct inode *inode, sector_t iblock, * - grab_page_cache when doing write_begin (have journal handle) */ static int ext4_da_writepage(struct page *page, - struct writeback_control *wbc) + struct writeback_control *wbc) { int ret = 0; loff_t size; @@ -2551,7 +2544,7 @@ static int ext4_da_writepage(struct page *page, if (page_has_buffers(page)) { page_bufs = page_buffers(page); if (walk_page_buffers(NULL, page_bufs, 0, len, NULL, - ext4_bh_unmapped_or_delay)) { + ext4_bh_delay_or_unwritten)) { /* * We don't want to do block allocation * So redirty the page and return @@ -2584,7 +2577,7 @@ static int ext4_da_writepage(struct page *page, page_bufs = page_buffers(page); /* check whether all are mapped and non delay */ if (walk_page_buffers(NULL, page_bufs, 0, len, NULL, - ext4_bh_unmapped_or_delay)) { + ext4_bh_delay_or_unwritten)) { redirty_page_for_writepage(wbc, page); unlock_page(page); return 0; @@ -3232,7 +3225,7 @@ static int ext4_normal_writepage(struct page *page, * happily proceed with mapping them and writing the page. */ BUG_ON(walk_page_buffers(NULL, page_buffers(page), 0, len, NULL, - ext4_bh_unmapped_or_delay)); + ext4_bh_delay_or_unwritten)); } if (!ext4_journal_current_handle()) @@ -3322,7 +3315,7 @@ static int ext4_journalled_writepage(struct page *page, * happily proceed with mapping them and writing the page. */ BUG_ON(walk_page_buffers(NULL, page_buffers(page), 0, len, NULL, - ext4_bh_unmapped_or_delay)); + ext4_bh_delay_or_unwritten)); } if (ext4_journal_current_handle()) -- cgit v1.2.3 From 43ce1d23b43330634507a049b55c36e91d27282e Mon Sep 17 00:00:00 2001 From: "Aneesh Kumar K.V" Date: Sun, 14 Jun 2009 17:58:45 -0400 Subject: ext4: Fix mmap/truncate race when blocksize < pagesize && !nodellaoc This patch fixes the mmap/truncate race that was fixed for delayed allocation by merging ext4_{journalled,normal,da}_writepage() into ext4_writepage(). Signed-off-by: Aneesh Kumar K.V Acked-by: Jan Kara Signed-off-by: "Theodore Ts'o" --- fs/ext4/inode.c | 234 +++++++++++--------------------------------- include/trace/events/ext4.h | 45 +-------- 2 files changed, 58 insertions(+), 221 deletions(-) diff --git a/fs/ext4/inode.c b/fs/ext4/inode.c index 1275f34589c..97c48b5b057 100644 --- a/fs/ext4/inode.c +++ b/fs/ext4/inode.c @@ -47,6 +47,10 @@ #define MPAGE_DA_EXTENT_TAIL 0x01 +static int __ext4_journalled_writepage(struct page *page, + struct writeback_control *wbc, + unsigned int len); + static inline int ext4_begin_ordered_truncate(struct inode *inode, loff_t new_size) { @@ -2392,7 +2396,7 @@ static int __mpage_da_writepage(struct page *page, * We need to try to allocate * unmapped blocks in the same page. * Otherwise we won't make progress - * with the page in ext4_da_writepage + * with the page in ext4_writepage */ if (ext4_bh_delay_or_unwritten(NULL, bh)) { mpage_add_bh_to_extent(mpd, logical, @@ -2519,13 +2523,47 @@ static int noalloc_get_block_write(struct inode *inode, sector_t iblock, } /* + * Note that we don't need to start a transaction unless we're journaling data + * because we should have holes filled from ext4_page_mkwrite(). We even don't + * need to file the inode to the transaction's list in ordered mode because if + * we are writing back data added by write(), the inode is already there and if + * we are writing back data modified via mmap(), noone guarantees in which + * transaction the data will hit the disk. In case we are journaling data, we + * cannot start transaction directly because transaction start ranks above page + * lock so we have to do some magic. + * * This function can get called via... * - ext4_da_writepages after taking page lock (have journal handle) * - journal_submit_inode_data_buffers (no journal handle) * - shrink_page_list via pdflush (no journal handle) * - grab_page_cache when doing write_begin (have journal handle) + * + * We don't do any block allocation in this function. If we have page with + * multiple blocks we need to write those buffer_heads that are mapped. This + * is important for mmaped based write. So if we do with blocksize 1K + * truncate(f, 1024); + * a = mmap(f, 0, 4096); + * a[0] = 'a'; + * truncate(f, 4096); + * we have in the page first buffer_head mapped via page_mkwrite call back + * but other bufer_heads would be unmapped but dirty(dirty done via the + * do_wp_page). So writepage should write the first block. If we modify + * the mmap area beyond 1024 we will again get a page_fault and the + * page_mkwrite callback will do the block allocation and mark the + * buffer_heads mapped. + * + * We redirty the page if we have any buffer_heads that is either delay or + * unwritten in the page. + * + * We can get recursively called as show below. + * + * ext4_writepage() -> kmalloc() -> __alloc_pages() -> page_launder() -> + * ext4_writepage() + * + * But since we don't do any block allocation we should not deadlock. + * Page also have the dirty flag cleared so we don't get recurive page_lock. */ -static int ext4_da_writepage(struct page *page, +static int ext4_writepage(struct page *page, struct writeback_control *wbc) { int ret = 0; @@ -2534,7 +2572,7 @@ static int ext4_da_writepage(struct page *page, struct buffer_head *page_bufs; struct inode *inode = page->mapping->host; - trace_ext4_da_writepage(inode, page); + trace_ext4_writepage(inode, page); size = i_size_read(inode); if (page->index == size >> PAGE_CACHE_SHIFT) len = size & ~PAGE_CACHE_MASK; @@ -2596,6 +2634,15 @@ static int ext4_da_writepage(struct page *page, block_commit_write(page, 0, len); } + if (PageChecked(page) && ext4_should_journal_data(inode)) { + /* + * It's mmapped pagecache. Add buffers and journal it. There + * doesn't seem much point in redirtying the page here. + */ + ClearPageChecked(page); + return __ext4_journalled_writepage(page, wbc, len); + } + if (test_opt(inode->i_sb, NOBH) && ext4_should_writeback_data(inode)) ret = nobh_writepage(page, noalloc_get_block_write, wbc); else @@ -3135,112 +3182,10 @@ static int bput_one(handle_t *handle, struct buffer_head *bh) return 0; } -/* - * Note that we don't need to start a transaction unless we're journaling data - * because we should have holes filled from ext4_page_mkwrite(). We even don't - * need to file the inode to the transaction's list in ordered mode because if - * we are writing back data added by write(), the inode is already there and if - * we are writing back data modified via mmap(), noone guarantees in which - * transaction the data will hit the disk. In case we are journaling data, we - * cannot start transaction directly because transaction start ranks above page - * lock so we have to do some magic. - * - * In all journaling modes block_write_full_page() will start the I/O. - * - * Problem: - * - * ext4_writepage() -> kmalloc() -> __alloc_pages() -> page_launder() -> - * ext4_writepage() - * - * Similar for: - * - * ext4_file_write() -> generic_file_write() -> __alloc_pages() -> ... - * - * Same applies to ext4_get_block(). We will deadlock on various things like - * lock_journal and i_data_sem - * - * Setting PF_MEMALLOC here doesn't work - too many internal memory - * allocations fail. - * - * 16May01: If we're reentered then journal_current_handle() will be - * non-zero. We simply *return*. - * - * 1 July 2001: @@@ FIXME: - * In journalled data mode, a data buffer may be metadata against the - * current transaction. But the same file is part of a shared mapping - * and someone does a writepage() on it. - * - * We will move the buffer onto the async_data list, but *after* it has - * been dirtied. So there's a small window where we have dirty data on - * BJ_Metadata. - * - * Note that this only applies to the last partial page in the file. The - * bit which block_write_full_page() uses prepare/commit for. (That's - * broken code anyway: it's wrong for msync()). - * - * It's a rare case: affects the final partial page, for journalled data - * where the file is subject to bith write() and writepage() in the same - * transction. To fix it we'll need a custom block_write_full_page(). - * We'll probably need that anyway for journalling writepage() output. - * - * We don't honour synchronous mounts for writepage(). That would be - * disastrous. Any write() or metadata operation will sync the fs for - * us. - * - */ -static int __ext4_normal_writepage(struct page *page, - struct writeback_control *wbc) -{ - struct inode *inode = page->mapping->host; - - if (test_opt(inode->i_sb, NOBH)) - return nobh_writepage(page, noalloc_get_block_write, wbc); - else - return block_write_full_page(page, noalloc_get_block_write, - wbc); -} - -static int ext4_normal_writepage(struct page *page, - struct writeback_control *wbc) -{ - struct inode *inode = page->mapping->host; - loff_t size = i_size_read(inode); - loff_t len; - - trace_ext4_normal_writepage(inode, page); - J_ASSERT(PageLocked(page)); - if (page->index == size >> PAGE_CACHE_SHIFT) - len = size & ~PAGE_CACHE_MASK; - else - len = PAGE_CACHE_SIZE; - - if (page_has_buffers(page)) { - /* if page has buffers it should all be mapped - * and allocated. If there are not buffers attached - * to the page we know the page is dirty but it lost - * buffers. That means that at some moment in time - * after write_begin() / write_end() has been called - * all buffers have been clean and thus they must have been - * written at least once. So they are all mapped and we can - * happily proceed with mapping them and writing the page. - */ - BUG_ON(walk_page_buffers(NULL, page_buffers(page), 0, len, NULL, - ext4_bh_delay_or_unwritten)); - } - - if (!ext4_journal_current_handle()) - return __ext4_normal_writepage(page, wbc); - - redirty_page_for_writepage(wbc, page); - unlock_page(page); - return 0; -} - static int __ext4_journalled_writepage(struct page *page, - struct writeback_control *wbc) + struct writeback_control *wbc, + unsigned int len) { - loff_t size; - unsigned int len; struct address_space *mapping = page->mapping; struct inode *inode = mapping->host; struct buffer_head *page_bufs; @@ -3248,16 +3193,8 @@ static int __ext4_journalled_writepage(struct page *page, int ret = 0; int err; - size = i_size_read(inode); - if (page->index == size >> PAGE_CACHE_SHIFT) - len = size & ~PAGE_CACHE_MASK; - else - len = PAGE_CACHE_SIZE; - ret = block_prepare_write(page, 0, len, noalloc_get_block_write); - if (ret != 0) - goto out_unlock; - page_bufs = page_buffers(page); + BUG_ON(!page_bufs); walk_page_buffers(handle, page_bufs, 0, len, NULL, bget_one); /* As soon as we unlock the page, it can go away, but we have * references to buffers so we are safe */ @@ -3282,67 +3219,10 @@ static int __ext4_journalled_writepage(struct page *page, walk_page_buffers(handle, page_bufs, 0, len, NULL, bput_one); EXT4_I(inode)->i_state |= EXT4_STATE_JDATA; - goto out; - -out_unlock: - unlock_page(page); out: return ret; } -static int ext4_journalled_writepage(struct page *page, - struct writeback_control *wbc) -{ - struct inode *inode = page->mapping->host; - loff_t size = i_size_read(inode); - loff_t len; - - trace_ext4_journalled_writepage(inode, page); - J_ASSERT(PageLocked(page)); - if (page->index == size >> PAGE_CACHE_SHIFT) - len = size & ~PAGE_CACHE_MASK; - else - len = PAGE_CACHE_SIZE; - - if (page_has_buffers(page)) { - /* if page has buffers it should all be mapped - * and allocated. If there are not buffers attached - * to the page we know the page is dirty but it lost - * buffers. That means that at some moment in time - * after write_begin() / write_end() has been called - * all buffers have been clean and thus they must have been - * written at least once. So they are all mapped and we can - * happily proceed with mapping them and writing the page. - */ - BUG_ON(walk_page_buffers(NULL, page_buffers(page), 0, len, NULL, - ext4_bh_delay_or_unwritten)); - } - - if (ext4_journal_current_handle()) - goto no_write; - - if (PageChecked(page)) { - /* - * It's mmapped pagecache. Add buffers and journal it. There - * doesn't seem much point in redirtying the page here. - */ - ClearPageChecked(page); - return __ext4_journalled_writepage(page, wbc); - } else { - /* - * It may be a page full of checkpoint-mode buffers. We don't - * really know unless we go poke around in the buffer_heads. - * But block_write_full_page will do the right thing. - */ - return block_write_full_page(page, noalloc_get_block_write, - wbc); - } -no_write: - redirty_page_for_writepage(wbc, page); - unlock_page(page); - return 0; -} - static int ext4_readpage(struct file *file, struct page *page) { return mpage_readpage(page, ext4_get_block); @@ -3489,7 +3369,7 @@ static int ext4_journalled_set_page_dirty(struct page *page) static const struct address_space_operations ext4_ordered_aops = { .readpage = ext4_readpage, .readpages = ext4_readpages, - .writepage = ext4_normal_writepage, + .writepage = ext4_writepage, .sync_page = block_sync_page, .write_begin = ext4_write_begin, .write_end = ext4_ordered_write_end, @@ -3504,7 +3384,7 @@ static const struct address_space_operations ext4_ordered_aops = { static const struct address_space_operations ext4_writeback_aops = { .readpage = ext4_readpage, .readpages = ext4_readpages, - .writepage = ext4_normal_writepage, + .writepage = ext4_writepage, .sync_page = block_sync_page, .write_begin = ext4_write_begin, .write_end = ext4_writeback_write_end, @@ -3519,7 +3399,7 @@ static const struct address_space_operations ext4_writeback_aops = { static const struct address_space_operations ext4_journalled_aops = { .readpage = ext4_readpage, .readpages = ext4_readpages, - .writepage = ext4_journalled_writepage, + .writepage = ext4_writepage, .sync_page = block_sync_page, .write_begin = ext4_write_begin, .write_end = ext4_journalled_write_end, @@ -3533,7 +3413,7 @@ static const struct address_space_operations ext4_journalled_aops = { static const struct address_space_operations ext4_da_aops = { .readpage = ext4_readpage, .readpages = ext4_readpages, - .writepage = ext4_da_writepage, + .writepage = ext4_writepage, .writepages = ext4_da_writepages, .sync_page = block_sync_page, .write_begin = ext4_da_write_begin, diff --git a/include/trace/events/ext4.h b/include/trace/events/ext4.h index b456fb0a3c5..dfbc9b0edc8 100644 --- a/include/trace/events/ext4.h +++ b/include/trace/events/ext4.h @@ -190,7 +190,7 @@ TRACE_EVENT(ext4_journalled_write_end, __entry->copied) ); -TRACE_EVENT(ext4_da_writepage, +TRACE_EVENT(ext4_writepage, TP_PROTO(struct inode *inode, struct page *page), TP_ARGS(inode, page), @@ -342,49 +342,6 @@ TRACE_EVENT(ext4_da_write_end, __entry->copied) ); -TRACE_EVENT(ext4_normal_writepage, - TP_PROTO(struct inode *inode, struct page *page), - - TP_ARGS(inode, page), - - TP_STRUCT__entry( - __field( dev_t, dev ) - __field( ino_t, ino ) - __field( pgoff_t, index ) - ), - - TP_fast_assign( - __entry->dev = inode->i_sb->s_dev; - __entry->ino = inode->i_ino; - __entry->index = page->index; - ), - - TP_printk("dev %s ino %lu page_index %lu", - jbd2_dev_to_name(__entry->dev), __entry->ino, __entry->index) -); - -TRACE_EVENT(ext4_journalled_writepage, - TP_PROTO(struct inode *inode, struct page *page), - - TP_ARGS(inode, page), - - TP_STRUCT__entry( - __field( dev_t, dev ) - __field( ino_t, ino ) - __field( pgoff_t, index ) - - ), - - TP_fast_assign( - __entry->dev = inode->i_sb->s_dev; - __entry->ino = inode->i_ino; - __entry->index = page->index; - ), - - TP_printk("dev %s ino %lu page_index %lu", - jbd2_dev_to_name(__entry->dev), __entry->ino, __entry->index) -); - TRACE_EVENT(ext4_discard_blocks, TP_PROTO(struct super_block *sb, unsigned long long blk, unsigned long long count), -- cgit v1.2.3 From 62e086be5d2abef8cad854bc5707329ad345f2ec Mon Sep 17 00:00:00 2001 From: "Aneesh Kumar K.V" Date: Sun, 14 Jun 2009 17:59:34 -0400 Subject: ext4: Move __ext4_journalled_writepage() to avoid forward declaration In addition, fix two unused variable warnings. Signed-off-by: Aneesh Kumar K.V Signed-off-by: "Theodore Ts'o" --- fs/ext4/inode.c | 112 +++++++++++++++++++++++++++----------------------------- 1 file changed, 54 insertions(+), 58 deletions(-) diff --git a/fs/ext4/inode.c b/fs/ext4/inode.c index 97c48b5b057..c98e3afea30 100644 --- a/fs/ext4/inode.c +++ b/fs/ext4/inode.c @@ -47,10 +47,6 @@ #define MPAGE_DA_EXTENT_TAIL 0x01 -static int __ext4_journalled_writepage(struct page *page, - struct writeback_control *wbc, - unsigned int len); - static inline int ext4_begin_ordered_truncate(struct inode *inode, loff_t new_size) { @@ -2522,6 +2518,59 @@ static int noalloc_get_block_write(struct inode *inode, sector_t iblock, return ret; } +static int bget_one(handle_t *handle, struct buffer_head *bh) +{ + get_bh(bh); + return 0; +} + +static int bput_one(handle_t *handle, struct buffer_head *bh) +{ + put_bh(bh); + return 0; +} + +static int __ext4_journalled_writepage(struct page *page, + struct writeback_control *wbc, + unsigned int len) +{ + struct address_space *mapping = page->mapping; + struct inode *inode = mapping->host; + struct buffer_head *page_bufs; + handle_t *handle = NULL; + int ret = 0; + int err; + + page_bufs = page_buffers(page); + BUG_ON(!page_bufs); + walk_page_buffers(handle, page_bufs, 0, len, NULL, bget_one); + /* As soon as we unlock the page, it can go away, but we have + * references to buffers so we are safe */ + unlock_page(page); + + handle = ext4_journal_start(inode, ext4_writepage_trans_blocks(inode)); + if (IS_ERR(handle)) { + ret = PTR_ERR(handle); + goto out; + } + + ret = walk_page_buffers(handle, page_bufs, 0, len, NULL, + do_journal_get_write_access); + + err = walk_page_buffers(handle, page_bufs, 0, len, NULL, + write_end_fn); + if (ret == 0) + ret = err; + err = ext4_journal_stop(handle); + if (!ret) + ret = err; + + walk_page_buffers(handle, page_bufs, 0, len, NULL, bput_one); + EXT4_I(inode)->i_state |= EXT4_STATE_JDATA; +out: + return ret; +} + /* * Note that we don't need to start a transaction unless we're journaling data * because we should have holes filled from ext4_page_mkwrite(). We even don't @@ -2564,7 +2613,7 @@ static int noalloc_get_block_write(struct inode *inode, sector_t iblock, * Page also have the dirty flag cleared so we don't get recurive page_lock. */ static int ext4_writepage(struct page *page, - struct writeback_control *wbc) + struct writeback_control *wbc) { int ret = 0; loff_t size; @@ -3170,59 +3219,6 @@ static sector_t ext4_bmap(struct address_space *mapping, sector_t block) return generic_block_bmap(mapping, block, ext4_get_block); } -static int bget_one(handle_t *handle, struct buffer_head *bh) -{ - get_bh(bh); - return 0; -} - -static int bput_one(handle_t *handle, struct buffer_head *bh) -{ - put_bh(bh); - return 0; -} - -static int __ext4_journalled_writepage(struct page *page, - struct writeback_control *wbc, - unsigned int len) -{ - struct address_space *mapping = page->mapping; - struct inode *inode = mapping->host; - struct buffer_head *page_bufs; - handle_t *handle = NULL; - int ret = 0; - int err; - - page_bufs = page_buffers(page); - BUG_ON(!page_bufs); - walk_page_buffers(handle, page_bufs, 0, len, NULL, bget_one); - /* As soon as we unlock the page, it can go away, but we have - * references to buffers so we are safe */ - unlock_page(page); - - handle = ext4_journal_start(inode, ext4_writepage_trans_blocks(inode)); - if (IS_ERR(handle)) { - ret = PTR_ERR(handle); - goto out; - } - - ret = walk_page_buffers(handle, page_bufs, 0, len, NULL, - do_journal_get_write_access); - - err = walk_page_buffers(handle, page_bufs, 0, len, NULL, - write_end_fn); - if (ret == 0) - ret = err; - err = ext4_journal_stop(handle); - if (!ret) - ret = err; - - walk_page_buffers(handle, page_bufs, 0, len, NULL, bput_one); - EXT4_I(inode)->i_state |= EXT4_STATE_JDATA; -out: - return ret; -} - static int ext4_readpage(struct file *file, struct page *page) { return mpage_readpage(page, ext4_get_block); -- cgit v1.2.3 From a7aea373b4ca428f1be2c1fedd2f26c8e3f2864d Mon Sep 17 00:00:00 2001 From: "Ira W. Snyder" Date: Thu, 23 Apr 2009 16:17:54 -0700 Subject: fsldma: use PCI Read Multiple command By default, the Freescale 83xx DMA controller uses the PCI Read Line command when reading data over the PCI bus. Setting the controller to use the PCI Read Multiple command instead allows the controller to read much larger bursts of data, which provides a drastic speed increase. The slowdown due to using PCI Read Line was only observed when a PCI-to-PCI bridge was between the devices trying to communicate. A simple test driver showed an increase from 4MB/sec to 116MB/sec when performing DMA over the PCI bus. Using DMA to transfer between blocks of local SDRAM showed no change in performance with this patch. The dmatest driver was also used to verify the correctness of the transfers, and showed no errors. Signed-off-by: Ira W. Snyder Acked-by: Timur Tabi Acked-by: Kumar Gala Signed-off-by: Dan Williams --- drivers/dma/fsldma.c | 10 ++++++++-- drivers/dma/fsldma.h | 1 + 2 files changed, 9 insertions(+), 2 deletions(-) diff --git a/drivers/dma/fsldma.c b/drivers/dma/fsldma.c index f18d1bde043..a1cb25e277b 100644 --- a/drivers/dma/fsldma.c +++ b/drivers/dma/fsldma.c @@ -12,6 +12,11 @@ * also fit for MPC8560, MPC8555, MPC8548, MPC8641, and etc. * The support for MPC8349 DMA contorller is also added. * + * This driver instructs the DMA controller to issue the PCI Read Multiple + * command for PCI read operations, instead of using the default PCI Read Line + * command. Please be aware that this setting may result in read pre-fetching + * on some platforms. + * * This is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by * the Free Software Foundation; either version 2 of the License, or @@ -49,9 +54,10 @@ static void dma_init(struct fsl_dma_chan *fsl_chan) case FSL_DMA_IP_83XX: /* Set the channel to below modes: * EOTIE - End-of-transfer interrupt enable + * PRC_RM - PCI read multiple */ - DMA_OUT(fsl_chan, &fsl_chan->reg_base->mr, FSL_DMA_MR_EOTIE, - 32); + DMA_OUT(fsl_chan, &fsl_chan->reg_base->mr, FSL_DMA_MR_EOTIE + | FSL_DMA_MR_PRC_RM, 32); break; } diff --git a/drivers/dma/fsldma.h b/drivers/dma/fsldma.h index 4f21a512d84..dc7f2686579 100644 --- a/drivers/dma/fsldma.h +++ b/drivers/dma/fsldma.h @@ -38,6 +38,7 @@ /* Special MR definition for MPC8349 */ #define FSL_DMA_MR_EOTIE 0x00000080 +#define FSL_DMA_MR_PRC_RM 0x00000800 #define FSL_DMA_SR_CH 0x00000020 #define FSL_DMA_SR_PE 0x00000010 -- cgit v1.2.3 From be30b226f2ae618cd719e40267d9923db1db9001 Mon Sep 17 00:00:00 2001 From: Ira Snyder Date: Thu, 28 May 2009 09:20:42 +0000 Subject: fsldma: enable external start for the 83xx controller The 83xx controller has external start capability, but lacks external pause capability. Hook up the external start function pointer for the 83xx controller. Signed-off-by: Ira W. Snyder Signed-off-by: Dan Williams --- drivers/dma/fsldma.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/dma/fsldma.c b/drivers/dma/fsldma.c index a1cb25e277b..10bcf0cb0ef 100644 --- a/drivers/dma/fsldma.c +++ b/drivers/dma/fsldma.c @@ -877,9 +877,9 @@ static int __devinit fsl_dma_chan_probe(struct fsl_dma_device *fdev, switch (new_fsl_chan->feature & FSL_DMA_IP_MASK) { case FSL_DMA_IP_85XX: - new_fsl_chan->toggle_ext_start = fsl_chan_toggle_ext_start; new_fsl_chan->toggle_ext_pause = fsl_chan_toggle_ext_pause; case FSL_DMA_IP_83XX: + new_fsl_chan->toggle_ext_start = fsl_chan_toggle_ext_start; new_fsl_chan->set_src_loop_size = fsl_chan_set_src_loop_size; new_fsl_chan->set_dest_loop_size = fsl_chan_set_dest_loop_size; } -- cgit v1.2.3 From 43a1a3ed6bf5a1b9ae197b4f5f20033baf19db61 Mon Sep 17 00:00:00 2001 From: Ira Snyder Date: Thu, 28 May 2009 09:26:40 +0000 Subject: fsldma: do not clear bandwidth control bits on the 83xx controller The 83xx controller does not support the external pause feature. The bit in the mode register that controls external pause on the 85xx controller happens to be part of the bandwidth control settings for the 83xx controller. This patch fixes the driver so that it only clears the external pause bit if the hardware is the 85xx controller. When driving the 83xx controller, the bit is left untouched. This follows the existing convention that mode registers settings are not touched unless necessary. Signed-off-by: Ira W. Snyder Signed-off-by: Dan Williams --- drivers/dma/fsldma.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/dma/fsldma.c b/drivers/dma/fsldma.c index 10bcf0cb0ef..6e60c77a145 100644 --- a/drivers/dma/fsldma.c +++ b/drivers/dma/fsldma.c @@ -147,10 +147,11 @@ static void dma_start(struct fsl_dma_chan *fsl_chan) if (fsl_chan->feature & FSL_DMA_CHAN_PAUSE_EXT) { DMA_OUT(fsl_chan, &fsl_chan->reg_base->bcr, 0, 32); mr_set |= FSL_DMA_MR_EMP_EN; - } else + } else if ((fsl_chan->feature & FSL_DMA_IP_MASK) == FSL_DMA_IP_85XX) { DMA_OUT(fsl_chan, &fsl_chan->reg_base->mr, DMA_IN(fsl_chan, &fsl_chan->reg_base->mr, 32) & ~FSL_DMA_MR_EMP_EN, 32); + } if (fsl_chan->feature & FSL_DMA_CHAN_START_EXT) mr_set |= FSL_DMA_MR_EMS_EN; -- cgit v1.2.3 From a566a6b11c86147fe9fc9db7ab15f9eecca3e862 Mon Sep 17 00:00:00 2001 From: Steven Whitehouse Date: Mon, 15 Jun 2009 08:26:48 +0100 Subject: dlm: Fix uninitialised variable warning in lock.c MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit CC [M] fs/dlm/lock.o fs/dlm/lock.c: In function ‘find_rsb’: fs/dlm/lock.c:438: warning: ‘r’ may be used uninitialized in this function Since r is used on the error path to set r_ret, set it to NULL. Signed-off-by: Steven Whitehouse Signed-off-by: David Teigland --- fs/dlm/lock.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/fs/dlm/lock.c b/fs/dlm/lock.c index 205ec95b347..eb507c453c5 100644 --- a/fs/dlm/lock.c +++ b/fs/dlm/lock.c @@ -435,7 +435,7 @@ static int search_rsb(struct dlm_ls *ls, char *name, int len, int b, static int find_rsb(struct dlm_ls *ls, char *name, int namelen, unsigned int flags, struct dlm_rsb **r_ret) { - struct dlm_rsb *r, *tmp; + struct dlm_rsb *r = NULL, *tmp; uint32_t hash, bucket; int error = -EINVAL; -- cgit v1.2.3 From c78a87d0a1fc885dfdbe21fd5e07787691dfb068 Mon Sep 17 00:00:00 2001 From: David Teigland Date: Thu, 18 Jun 2009 13:20:24 -0500 Subject: dlm: fix plock use-after-free Fix a regression from the original addition of nfs lock support 586759f03e2e9031ac5589912a51a909ed53c30a. When a synchronous (non-nfs) plock completes, the waiting thread will wake up and free the op struct. This races with the user thread in dev_write() which goes on to read the op's callback field to check if the lock is async and needs a callback. This check can happen on the freed op. The fix is to note the callback value before the op can be freed. Signed-off-by: David Teigland --- fs/dlm/plock.c | 17 ++++++++++------- 1 file changed, 10 insertions(+), 7 deletions(-) diff --git a/fs/dlm/plock.c b/fs/dlm/plock.c index 894a32d438d..16f682e26c0 100644 --- a/fs/dlm/plock.c +++ b/fs/dlm/plock.c @@ -353,7 +353,7 @@ static ssize_t dev_write(struct file *file, const char __user *u, size_t count, { struct dlm_plock_info info; struct plock_op *op; - int found = 0; + int found = 0, do_callback = 0; if (count != sizeof(info)) return -EINVAL; @@ -366,21 +366,24 @@ static ssize_t dev_write(struct file *file, const char __user *u, size_t count, spin_lock(&ops_lock); list_for_each_entry(op, &recv_list, list) { - if (op->info.fsid == info.fsid && op->info.number == info.number && + if (op->info.fsid == info.fsid && + op->info.number == info.number && op->info.owner == info.owner) { + struct plock_xop *xop = (struct plock_xop *)op; list_del_init(&op->list); - found = 1; - op->done = 1; memcpy(&op->info, &info, sizeof(info)); + if (xop->callback) + do_callback = 1; + else + op->done = 1; + found = 1; break; } } spin_unlock(&ops_lock); if (found) { - struct plock_xop *xop; - xop = (struct plock_xop *)op; - if (xop->callback) + if (do_callback) dlm_plock_callback(op); else wake_up(&recv_wq); -- cgit v1.2.3 From d4ec36bac3de39b7e10ec8f42fbdd20d9a9ed753 Mon Sep 17 00:00:00 2001 From: Wolfram Sang Date: Sun, 21 Jun 2009 12:32:39 +0200 Subject: sched: Documentation/sched-rt-group: Fix style issues & bump version - add missing closing bracket - fix two 80-chars issues (as the rest of the document adheres to it) - bump a reference to kernel version, so the document does not feel aged Signed-off-by: Wolfram Sang Cc: Peter Zijlstra LKML-Reference: <1245580359-4465-1-git-send-email-w.sang@pengutronix.de> Signed-off-by: Ingo Molnar --- Documentation/scheduler/sched-rt-group.txt | 13 +++++++------ 1 file changed, 7 insertions(+), 6 deletions(-) diff --git a/Documentation/scheduler/sched-rt-group.txt b/Documentation/scheduler/sched-rt-group.txt index 1df7f9cdab0..86eabe6c341 100644 --- a/Documentation/scheduler/sched-rt-group.txt +++ b/Documentation/scheduler/sched-rt-group.txt @@ -73,7 +73,7 @@ The remaining CPU time will be used for user input and other tasks. Because realtime tasks have explicitly allocated the CPU time they need to perform their tasks, buffer underruns in the graphics or audio can be eliminated. -NOTE: the above example is not fully implemented as of yet (2.6.25). We still +NOTE: the above example is not fully implemented yet. We still lack an EDF scheduler to make non-uniform periods usable. @@ -140,14 +140,15 @@ The other option is: .o CONFIG_CGROUP_SCHED (aka "Basis for grouping tasks" = "Control groups") -This uses the /cgroup virtual file system and "/cgroup//cpu.rt_runtime_us" -to control the CPU time reserved for each control group instead. +This uses the /cgroup virtual file system and +"/cgroup//cpu.rt_runtime_us" to control the CPU time reserved for each +control group instead. For more information on working with control groups, you should read Documentation/cgroups/cgroups.txt as well. -Group settings are checked against the following limits in order to keep the configuration -schedulable: +Group settings are checked against the following limits in order to keep the +configuration schedulable: \Sum_{i} runtime_{i} / global_period <= global_runtime / global_period @@ -189,7 +190,7 @@ Implementing SCHED_EDF might take a while to complete. Priority Inheritance is the biggest challenge as the current linux PI infrastructure is geared towards the limited static priority levels 0-99. With deadline scheduling you need to do deadline inheritance (since priority is inversely proportional to the -deadline delta (deadline - now). +deadline delta (deadline - now)). This means the whole PI machinery will have to be reworked - and that is one of the most complex pieces of code we have. -- cgit v1.2.3 From 4859484b0957ddc7fe3e0fa349d98b0f1c7876bd Mon Sep 17 00:00:00 2001 From: Jiri Slaby Date: Fri, 19 Jun 2009 23:24:11 +0200 Subject: HID: hiddev, fix lock imbalance Add omitted BKL to one switch/case. Cc: Stable Signed-off-by: Jiri Slaby Signed-off-by: Jiri Kosina --- drivers/hid/usbhid/hiddev.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/drivers/hid/usbhid/hiddev.c b/drivers/hid/usbhid/hiddev.c index e9b436d2d94..39e27f4be4a 100644 --- a/drivers/hid/usbhid/hiddev.c +++ b/drivers/hid/usbhid/hiddev.c @@ -527,8 +527,10 @@ static noinline int hiddev_ioctl_usage(struct hiddev *hiddev, unsigned int cmd, goto goodreturn; case HIDIOCGCOLLECTIONINDEX: + i = field->usage[uref->usage_index].collection_index; + unlock_kernel(); kfree(uref_multi); - return field->usage[uref->usage_index].collection_index; + return i; case HIDIOCGUSAGES: for (i = 0; i < uref_multi->num_values; i++) uref_multi->values[i] = -- cgit v1.2.3 From bc33dc5ae7ed7a422ab1141d3bf81c6cee2a5050 Mon Sep 17 00:00:00 2001 From: Huang Weiyi Date: Tue, 16 Jun 2009 16:56:09 +0800 Subject: mx31: remove duplicated #include Remove duplicated #include in arch/arm/mach-mx3/devices.c. Signed-off-by: Huang Weiyi Signed-off-by: Sascha Hauer --- arch/arm/mach-mx3/devices.c | 1 - 1 file changed, 1 deletion(-) diff --git a/arch/arm/mach-mx3/devices.c b/arch/arm/mach-mx3/devices.c index d927eddcad4..9e87e08fb12 100644 --- a/arch/arm/mach-mx3/devices.c +++ b/arch/arm/mach-mx3/devices.c @@ -22,7 +22,6 @@ #include #include #include -#include #include #include #include -- cgit v1.2.3 From c3a9c7f53a0eb1ec687ecf131f9cfb41bbdc26b5 Mon Sep 17 00:00:00 2001 From: Alberto Panizzo Date: Wed, 17 Jun 2009 15:05:21 +0200 Subject: ARM MXC: Armadillo 500 add NOR flash device support (resend). This patch add support for NOR flash mapping through the physmap driver. The purpose is to maintain the original Atmark partition model. Signed-off-by: Alberto Panizzo Signed-off-by: Sascha Hauer --- arch/arm/mach-mx3/armadillo5x0.c | 47 ++++++++++++++++++++++++++++++++++++++++ 1 file changed, 47 insertions(+) diff --git a/arch/arm/mach-mx3/armadillo5x0.c b/arch/arm/mach-mx3/armadillo5x0.c index 541181090b3..38d99e6c9d0 100644 --- a/arch/arm/mach-mx3/armadillo5x0.c +++ b/arch/arm/mach-mx3/armadillo5x0.c @@ -31,6 +31,7 @@ #include #include #include +#include #include #include @@ -96,6 +97,48 @@ static int armadillo5x0_pins[] = { }; +/* + * MTD NOR Flash + */ +static struct mtd_partition armadillo5x0_nor_flash_partitions[] = { + { + .name = "nor.bootloader", + .offset = 0x00000000, + .size = 4*32*1024, + }, { + .name = "nor.kernel", + .offset = MTDPART_OFS_APPEND, + .size = 16*128*1024, + }, { + .name = "nor.userland", + .offset = MTDPART_OFS_APPEND, + .size = 110*128*1024, + }, { + .name = "nor.config", + .offset = MTDPART_OFS_APPEND, + .size = 1*128*1024, + }, +}; + +static struct physmap_flash_data armadillo5x0_nor_flash_pdata = { + .width = 2, + .parts = armadillo5x0_nor_flash_partitions, + .nr_parts = ARRAY_SIZE(armadillo5x0_nor_flash_partitions), +}; + +static struct resource armadillo5x0_nor_flash_resource = { + .flags = IORESOURCE_MEM, + .start = CS0_BASE_ADDR, + .end = CS0_BASE_ADDR + SZ_64M - 1, +}; + +static struct platform_device armadillo5x0_nor_flash = { + .name = "physmap-flash", + .id = -1, + .num_resources = 1, + .resource = &armadillo5x0_nor_flash_resource, +}; + /* * FB support */ @@ -272,6 +315,10 @@ static void __init armadillo5x0_init(void) /* Register FB */ mxc_register_device(&mx3_ipu, &mx3_ipu_data); mxc_register_device(&mx3_fb, &mx3fb_pdata); + + /* Register NOR Flash */ + mxc_register_device(&armadillo5x0_nor_flash, + &armadillo5x0_nor_flash_pdata); } static void __init armadillo5x0_timer_init(void) -- cgit v1.2.3 From 0c8bad6a26aefbcb7b3d8d1e5d97c53076ac99af Mon Sep 17 00:00:00 2001 From: Alberto Panizzo Date: Wed, 17 Jun 2009 15:06:30 +0200 Subject: Armadillo 500 add NAND flash device support (resend). Since recent mxc_nand driver fixes from linux-mtd this patch add support for ST NAND02GW3B2CN6 (2k pages flash) placed on the armadillo 500 motherboard. Signed-off-by: Alberto Panizzo Signed-off-by: Sascha Hauer --- arch/arm/mach-mx3/armadillo5x0.c | 16 ++++++++++++++++ 1 file changed, 16 insertions(+) diff --git a/arch/arm/mach-mx3/armadillo5x0.c b/arch/arm/mach-mx3/armadillo5x0.c index 38d99e6c9d0..ee331fd6b1b 100644 --- a/arch/arm/mach-mx3/armadillo5x0.c +++ b/arch/arm/mach-mx3/armadillo5x0.c @@ -32,6 +32,7 @@ #include #include #include +#include #include #include @@ -47,8 +48,10 @@ #include #include #include +#include #include "devices.h" +#include "crm_regs.h" static int armadillo5x0_pins[] = { /* UART1 */ @@ -94,7 +97,14 @@ static int armadillo5x0_pins[] = { MX31_PIN_FPSHIFT__FPSHIFT, MX31_PIN_DRDY0__DRDY0, IOMUX_MODE(MX31_PIN_LCS1, IOMUX_CONFIG_GPIO), /*ADV7125_PSAVE*/ +}; +/* + * NAND Flash + */ +static struct mxc_nand_platform_data armadillo5x0_nand_flash_pdata = { + .width = 1, + .hw_ecc = 1, }; /* @@ -319,6 +329,12 @@ static void __init armadillo5x0_init(void) /* Register NOR Flash */ mxc_register_device(&armadillo5x0_nor_flash, &armadillo5x0_nor_flash_pdata); + + /* Register NAND Flash */ + mxc_register_device(&mxc_nand_device, &armadillo5x0_nand_flash_pdata); + + /* set NAND page size to 2k if not configured via boot mode pins */ + __raw_writel(__raw_readl(MXC_CCM_RCSR) | (1 << 30), MXC_CCM_RCSR); } static void __init armadillo5x0_timer_init(void) -- cgit v1.2.3 From 32c1ad9ab2ae4171d8f3dd0c70a611f799ad6775 Mon Sep 17 00:00:00 2001 From: Guennadi Liakhovetski Date: Thu, 18 Jun 2009 12:40:48 +0200 Subject: pcm037: add MT9T031 camera support Add support for the MT9T031 CMOS camera sensor from Aptina to the PCM037 board. Also add two I2C iomux pin definitions, needed for pcm037. Also remove now unneeded #ifdef CONFIG_I2C_IMX. Signed-off-by: Guennadi Liakhovetski Signed-off-by: Sascha Hauer --- arch/arm/mach-mx3/pcm037.c | 118 ++++++++++++++++++++++++++--- arch/arm/plat-mxc/include/mach/iomux-mx3.h | 2 + 2 files changed, 108 insertions(+), 12 deletions(-) diff --git a/arch/arm/mach-mx3/pcm037.c b/arch/arm/mach-mx3/pcm037.c index c6f61a1f06c..d7b29b724a6 100644 --- a/arch/arm/mach-mx3/pcm037.c +++ b/arch/arm/mach-mx3/pcm037.c @@ -18,7 +18,7 @@ #include #include - +#include #include #include #include @@ -33,22 +33,23 @@ #include #include -#include +#include + #include #include #include #include +#include #include +#include +#include #include #include #include -#include +#include +#include #include #include -#include -#ifdef CONFIG_I2C_IMX -#include -#endif #include "devices.h" @@ -56,6 +57,8 @@ static unsigned int pcm037_pins[] = { /* I2C */ MX31_PIN_CSPI2_MOSI__SCL, MX31_PIN_CSPI2_MISO__SDA, + MX31_PIN_CSPI2_SS2__I2C3_SDA, + MX31_PIN_CSPI2_SCLK__I2C3_SCL, /* SDHC1 */ MX31_PIN_SD1_DATA3__SD1_DATA3, MX31_PIN_SD1_DATA2__SD1_DATA2, @@ -120,6 +123,22 @@ static unsigned int pcm037_pins[] = { MX31_PIN_D3_SPL__D3_SPL, MX31_PIN_D3_CLS__D3_CLS, MX31_PIN_LCS0__GPI03_23, + /* CSI */ + IOMUX_MODE(MX31_PIN_CSI_D5, IOMUX_CONFIG_GPIO), + MX31_PIN_CSI_D6__CSI_D6, + MX31_PIN_CSI_D7__CSI_D7, + MX31_PIN_CSI_D8__CSI_D8, + MX31_PIN_CSI_D9__CSI_D9, + MX31_PIN_CSI_D10__CSI_D10, + MX31_PIN_CSI_D11__CSI_D11, + MX31_PIN_CSI_D12__CSI_D12, + MX31_PIN_CSI_D13__CSI_D13, + MX31_PIN_CSI_D14__CSI_D14, + MX31_PIN_CSI_D15__CSI_D15, + MX31_PIN_CSI_HSYNC__CSI_HSYNC, + MX31_PIN_CSI_MCLK__CSI_MCLK, + MX31_PIN_CSI_PIXCLK__CSI_PIXCLK, + MX31_PIN_CSI_VSYNC__CSI_VSYNC, }; static struct physmap_flash_data pcm037_flash_data = { @@ -250,19 +269,43 @@ static struct mxc_nand_platform_data pcm037_nand_board_info = { .hw_ecc = 1, }; -#ifdef CONFIG_I2C_IMX static struct imxi2c_platform_data pcm037_i2c_1_data = { .bitrate = 100000, }; +static struct imxi2c_platform_data pcm037_i2c_2_data = { + .bitrate = 20000, +}; + static struct at24_platform_data board_eeprom = { .byte_len = 4096, .page_size = 32, .flags = AT24_FLAG_ADDR16, }; +static int pcm037_camera_power(struct device *dev, int on) +{ + /* disable or enable the camera in X7 or X8 PCM970 connector */ + gpio_set_value(IOMUX_TO_GPIO(MX31_PIN_CSI_D5), !on); + return 0; +} + +static struct i2c_board_info pcm037_i2c_2_devices[] = { + { + I2C_BOARD_INFO("mt9t031", 0x5d), + }, +}; + +static struct soc_camera_link iclink = { + .bus_id = 0, /* Must match with the camera ID */ + .power = pcm037_camera_power, + .board_info = &pcm037_i2c_2_devices[0], + .i2c_adapter_id = 2, + .module_name = "mt9t031", +}; + static struct i2c_board_info pcm037_i2c_devices[] = { - { + { I2C_BOARD_INFO("at24", 0x52), /* E0=0, E1=1, E2=0 */ .platform_data = &board_eeprom, }, { @@ -270,7 +313,14 @@ static struct i2c_board_info pcm037_i2c_devices[] = { .type = "pcf8563", } }; -#endif + +static struct platform_device pcm037_camera = { + .name = "soc-camera-pdrv", + .id = 0, + .dev = { + .platform_data = &iclink, + }, +}; /* Not connected by default */ #ifdef PCM970_SDHC_RW_SWITCH @@ -334,9 +384,41 @@ static struct imxmmc_platform_data sdhc_pdata = { .exit = pcm970_sdhc1_exit, }; +struct mx3_camera_pdata camera_pdata = { + .dma_dev = &mx3_ipu.dev, + .flags = MX3_CAMERA_DATAWIDTH_8 | MX3_CAMERA_DATAWIDTH_10, + .mclk_10khz = 2000, +}; + +static int __init pcm037_camera_alloc_dma(const size_t buf_size) +{ + dma_addr_t dma_handle; + void *buf; + int dma; + + if (buf_size < 2 * 1024 * 1024) + return -EINVAL; + + buf = dma_alloc_coherent(NULL, buf_size, &dma_handle, GFP_KERNEL); + if (!buf) { + pr_err("%s: cannot allocate camera buffer-memory\n", __func__); + return -ENOMEM; + } + + memset(buf, 0, buf_size); + + dma = dma_declare_coherent_memory(&mx3_camera.dev, + dma_handle, dma_handle, buf_size, + DMA_MEMORY_MAP | DMA_MEMORY_EXCLUSIVE); + + /* The way we call dma_declare_coherent_memory only a malloc can fail */ + return dma & DMA_MEMORY_MAP ? 0 : -ENOMEM; +} + static struct platform_device *devices[] __initdata = { &pcm037_flash, &pcm037_sram_device, + &pcm037_camera, }; static struct ipu_platform_data mx3_ipu_data = { @@ -415,18 +497,30 @@ static void __init mxc_board_init(void) } -#ifdef CONFIG_I2C_IMX + /* I2C adapters and devices */ i2c_register_board_info(1, pcm037_i2c_devices, ARRAY_SIZE(pcm037_i2c_devices)); mxc_register_device(&mxc_i2c_device1, &pcm037_i2c_1_data); -#endif + mxc_register_device(&mxc_i2c_device2, &pcm037_i2c_2_data); + mxc_register_device(&mxc_nand_device, &pcm037_nand_board_info); mxc_register_device(&mxcsdhc_device0, &sdhc_pdata); mxc_register_device(&mx3_ipu, &mx3_ipu_data); mxc_register_device(&mx3_fb, &mx3fb_pdata); if (!gpio_usbotg_hs_activate()) mxc_register_device(&mxc_otg_udc_device, &usb_pdata); + + /* CSI */ + /* Camera power: default - off */ + ret = gpio_request(IOMUX_TO_GPIO(MX31_PIN_CSI_D5), "mt9t031-power"); + if (!ret) + gpio_direction_output(IOMUX_TO_GPIO(MX31_PIN_CSI_D5), 1); + else + iclink.power = NULL; + + if (!pcm037_camera_alloc_dma(4 * 1024 * 1024)) + mxc_register_device(&mx3_camera, &camera_pdata); } static void __init pcm037_timer_init(void) diff --git a/arch/arm/plat-mxc/include/mach/iomux-mx3.h b/arch/arm/plat-mxc/include/mach/iomux-mx3.h index 27f8d1b2bc6..2eb182f7387 100644 --- a/arch/arm/plat-mxc/include/mach/iomux-mx3.h +++ b/arch/arm/plat-mxc/include/mach/iomux-mx3.h @@ -602,6 +602,8 @@ enum iomux_pins { #define MX31_PIN_I2C_DAT__SDA IOMUX_MODE(MX31_PIN_I2C_DAT, IOMUX_CONFIG_FUNC) #define MX31_PIN_DCD_DTE1__I2C2_SDA IOMUX_MODE(MX31_PIN_DCD_DTE1, IOMUX_CONFIG_ALT2) #define MX31_PIN_RI_DTE1__I2C2_SCL IOMUX_MODE(MX31_PIN_RI_DTE1, IOMUX_CONFIG_ALT2) +#define MX31_PIN_CSPI2_SS2__I2C3_SDA IOMUX_MODE(MX31_PIN_CSPI2_SS2, IOMUX_CONFIG_ALT1) +#define MX31_PIN_CSPI2_SCLK__I2C3_SCL IOMUX_MODE(MX31_PIN_CSPI2_SCLK, IOMUX_CONFIG_ALT1) #define MX31_PIN_CSI_D4__CSI_D4 IOMUX_MODE(MX31_PIN_CSI_D4, IOMUX_CONFIG_FUNC) #define MX31_PIN_CSI_D5__CSI_D5 IOMUX_MODE(MX31_PIN_CSI_D5, IOMUX_CONFIG_FUNC) #define MX31_PIN_CSI_D6__CSI_D6 IOMUX_MODE(MX31_PIN_CSI_D6, IOMUX_CONFIG_FUNC) -- cgit v1.2.3 From 574ec547c7771881e18e4e76ca970e323bcdc774 Mon Sep 17 00:00:00 2001 From: Guennadi Liakhovetski Date: Tue, 23 Jun 2009 13:26:23 +0200 Subject: ARM: add support for the EET board, based on the i.MX31 pcm037 module The "EET" variant of the pcm037 board has an OLED display, using a S6E63D6 display controller on the first SPI interface, using GPIO57 as a chip-select for it. S6E63D6 is initialised in the boot-loader, so we only have to take care of the LCD. EET also adds several buttons and LEDs on GPIOs. This patch adds a "pcm037_variant=" kernel command line parameter to specify at boot-time which board the kernel is running on, default is "pcm970", specify "eet" for the EET board. Signed-off-by: Guennadi Liakhovetski Signed-off-by: Sascha Hauer --- arch/arm/mach-mx3/Kconfig | 8 ++ arch/arm/mach-mx3/Makefile | 1 + arch/arm/mach-mx3/pcm037.c | 65 +++++++++++-- arch/arm/mach-mx3/pcm037.h | 11 +++ arch/arm/mach-mx3/pcm037_eet.c | 204 +++++++++++++++++++++++++++++++++++++++++ 5 files changed, 283 insertions(+), 6 deletions(-) create mode 100644 arch/arm/mach-mx3/pcm037.h create mode 100644 arch/arm/mach-mx3/pcm037_eet.c diff --git a/arch/arm/mach-mx3/Kconfig b/arch/arm/mach-mx3/Kconfig index 17a21a291e2..851f2458bf6 100644 --- a/arch/arm/mach-mx3/Kconfig +++ b/arch/arm/mach-mx3/Kconfig @@ -36,6 +36,14 @@ config MACH_PCM037 Include support for Phytec pcm037 platform. This includes specific configurations for the board and its peripherals. +config MACH_PCM037_EET + bool "Support pcm037 EET board extensions" + depends on MACH_PCM037 + help + Add support for PCM037 EET baseboard extensions. If you are using the + OLED display with EET, use "video=mx3fb:CMEL-OLED" kernel + command-line parameter. + config MACH_MX31LITE bool "Support MX31 LITEKIT (LogicPD)" select ARCH_MX31 diff --git a/arch/arm/mach-mx3/Makefile b/arch/arm/mach-mx3/Makefile index 0322696bd11..6b9775471be 100644 --- a/arch/arm/mach-mx3/Makefile +++ b/arch/arm/mach-mx3/Makefile @@ -11,6 +11,7 @@ obj-$(CONFIG_MACH_MX31ADS) += mx31ads.o obj-$(CONFIG_MACH_MX31LILLY) += mx31lilly.o mx31lilly-db.o obj-$(CONFIG_MACH_MX31LITE) += mx31lite.o obj-$(CONFIG_MACH_PCM037) += pcm037.o +obj-$(CONFIG_MACH_PCM037_EET) += pcm037_eet.o obj-$(CONFIG_MACH_MX31_3DS) += mx31pdk.o obj-$(CONFIG_MACH_MX31MOBOARD) += mx31moboard.o mx31moboard-devboard.o \ mx31moboard-marxbot.o diff --git a/arch/arm/mach-mx3/pcm037.c b/arch/arm/mach-mx3/pcm037.c index d7b29b724a6..840cfda341d 100644 --- a/arch/arm/mach-mx3/pcm037.c +++ b/arch/arm/mach-mx3/pcm037.c @@ -52,6 +52,41 @@ #include #include "devices.h" +#include "pcm037.h" + +static enum pcm037_board_variant pcm037_instance = PCM037_PCM970; + +static int __init pcm037_variant_setup(char *str) +{ + if (!strcmp("eet", str)) + pcm037_instance = PCM037_EET; + else if (strcmp("pcm970", str)) + pr_warning("Unknown pcm037 baseboard variant %s\n", str); + + return 1; +} + +/* Supported values: "pcm970" (default) and "eet" */ +__setup("pcm037_variant=", pcm037_variant_setup); + +enum pcm037_board_variant pcm037_variant(void) +{ + return pcm037_instance; +} + +/* UART1 with RTS/CTS handshake signals */ +static unsigned int pcm037_uart1_handshake_pins[] = { + MX31_PIN_CTS1__CTS1, + MX31_PIN_RTS1__RTS1, + MX31_PIN_TXD1__TXD1, + MX31_PIN_RXD1__RXD1, +}; + +/* UART1 without RTS/CTS handshake signals */ +static unsigned int pcm037_uart1_pins[] = { + MX31_PIN_TXD1__TXD1, + MX31_PIN_RXD1__RXD1, +}; static unsigned int pcm037_pins[] = { /* I2C */ @@ -76,11 +111,6 @@ static unsigned int pcm037_pins[] = { MX31_PIN_CSPI1_SS0__SS0, MX31_PIN_CSPI1_SS1__SS1, MX31_PIN_CSPI1_SS2__SS2, - /* UART1 */ - MX31_PIN_CTS1__CTS1, - MX31_PIN_RTS1__RTS1, - MX31_PIN_TXD1__TXD1, - MX31_PIN_RXD1__RXD1, /* UART2 */ MX31_PIN_TXD2__TXD2, MX31_PIN_RXD2__RXD2, @@ -459,6 +489,22 @@ static const struct fb_videomode fb_modedb[] = { .sync = FB_SYNC_VERT_HIGH_ACT | FB_SYNC_OE_ACT_HIGH, .vmode = FB_VMODE_NONINTERLACED, .flag = 0, + }, { + /* 240x320 @ 60 Hz */ + .name = "CMEL-OLED", + .refresh = 60, + .xres = 240, + .yres = 320, + .pixclock = 185925, + .left_margin = 9, + .right_margin = 16, + .upper_margin = 7, + .lower_margin = 9, + .hsync_len = 1, + .vsync_len = 1, + .sync = FB_SYNC_OE_ACT_HIGH | FB_SYNC_CLK_INVERT, + .vmode = FB_VMODE_NONINTERLACED, + .flag = 0, }, }; @@ -479,6 +525,14 @@ static void __init mxc_board_init(void) mxc_iomux_setup_multiple_pins(pcm037_pins, ARRAY_SIZE(pcm037_pins), "pcm037"); + if (pcm037_variant() == PCM037_EET) + mxc_iomux_setup_multiple_pins(pcm037_uart1_pins, + ARRAY_SIZE(pcm037_uart1_pins), "pcm037_uart1"); + else + mxc_iomux_setup_multiple_pins(pcm037_uart1_handshake_pins, + ARRAY_SIZE(pcm037_uart1_handshake_pins), + "pcm037_uart1"); + platform_add_devices(devices, ARRAY_SIZE(devices)); mxc_register_device(&mxc_uart_device0, &uart_pdata); @@ -542,4 +596,3 @@ MACHINE_START(PCM037, "Phytec Phycore pcm037") .init_machine = mxc_board_init, .timer = &pcm037_timer, MACHINE_END - diff --git a/arch/arm/mach-mx3/pcm037.h b/arch/arm/mach-mx3/pcm037.h new file mode 100644 index 00000000000..d6929721a5f --- /dev/null +++ b/arch/arm/mach-mx3/pcm037.h @@ -0,0 +1,11 @@ +#ifndef __PCM037_H__ +#define __PCM037_H__ + +enum pcm037_board_variant { + PCM037_PCM970, + PCM037_EET, +}; + +extern enum pcm037_board_variant pcm037_variant(void); + +#endif diff --git a/arch/arm/mach-mx3/pcm037_eet.c b/arch/arm/mach-mx3/pcm037_eet.c new file mode 100644 index 00000000000..fe52fb1bb8b --- /dev/null +++ b/arch/arm/mach-mx3/pcm037_eet.c @@ -0,0 +1,204 @@ +/* + * Copyright (C) 2009 + * Guennadi Liakhovetski, DENX Software Engineering, + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +#include +#include +#include +#include +#include + +#include +#if defined(CONFIG_SPI_IMX) || defined(CONFIG_SPI_IMX_MODULE) +#include +#endif +#include + +#include + +#include "pcm037.h" +#include "devices.h" + +static unsigned int pcm037_eet_pins[] = { + /* SPI #1 */ + MX31_PIN_CSPI1_MISO__MISO, + MX31_PIN_CSPI1_MOSI__MOSI, + MX31_PIN_CSPI1_SCLK__SCLK, + MX31_PIN_CSPI1_SPI_RDY__SPI_RDY, + MX31_PIN_CSPI1_SS0__SS0, + MX31_PIN_CSPI1_SS1__SS1, + MX31_PIN_CSPI1_SS2__SS2, + + /* Reserve and hardwire GPIO 57 high - S6E63D6 chipselect */ + IOMUX_MODE(MX31_PIN_KEY_COL7, IOMUX_CONFIG_GPIO), + /* GPIO keys */ + IOMUX_MODE(MX31_PIN_GPIO1_0, IOMUX_CONFIG_GPIO), /* 0 */ + IOMUX_MODE(MX31_PIN_GPIO1_1, IOMUX_CONFIG_GPIO), /* 1 */ + IOMUX_MODE(MX31_PIN_GPIO1_2, IOMUX_CONFIG_GPIO), /* 2 */ + IOMUX_MODE(MX31_PIN_GPIO1_3, IOMUX_CONFIG_GPIO), /* 3 */ + IOMUX_MODE(MX31_PIN_SVEN0, IOMUX_CONFIG_GPIO), /* 32 */ + IOMUX_MODE(MX31_PIN_STX0, IOMUX_CONFIG_GPIO), /* 33 */ + IOMUX_MODE(MX31_PIN_SRX0, IOMUX_CONFIG_GPIO), /* 34 */ + IOMUX_MODE(MX31_PIN_SIMPD0, IOMUX_CONFIG_GPIO), /* 35 */ + IOMUX_MODE(MX31_PIN_RTS1, IOMUX_CONFIG_GPIO), /* 38 */ + IOMUX_MODE(MX31_PIN_CTS1, IOMUX_CONFIG_GPIO), /* 39 */ + IOMUX_MODE(MX31_PIN_KEY_ROW4, IOMUX_CONFIG_GPIO), /* 50 */ + IOMUX_MODE(MX31_PIN_KEY_ROW5, IOMUX_CONFIG_GPIO), /* 51 */ + IOMUX_MODE(MX31_PIN_KEY_ROW6, IOMUX_CONFIG_GPIO), /* 52 */ + IOMUX_MODE(MX31_PIN_KEY_ROW7, IOMUX_CONFIG_GPIO), /* 53 */ + + /* LEDs */ + IOMUX_MODE(MX31_PIN_DTR_DTE1, IOMUX_CONFIG_GPIO), /* 44 */ + IOMUX_MODE(MX31_PIN_DSR_DTE1, IOMUX_CONFIG_GPIO), /* 45 */ + IOMUX_MODE(MX31_PIN_KEY_COL5, IOMUX_CONFIG_GPIO), /* 55 */ + IOMUX_MODE(MX31_PIN_KEY_COL6, IOMUX_CONFIG_GPIO), /* 56 */ +}; + +/* SPI */ +static struct spi_board_info pcm037_spi_dev[] = { + { + .modalias = "dac124s085", + .max_speed_hz = 400000, + .bus_num = 0, + .chip_select = 0, /* Index in pcm037_spi1_cs[] */ + .mode = SPI_CPHA, + }, +}; + +/* Platform Data for MXC CSPI */ +#if defined(CONFIG_SPI_IMX) || defined(CONFIG_SPI_IMX_MODULE) +static int pcm037_spi1_cs[] = {MXC_SPI_CS(1), IOMUX_TO_GPIO(MX31_PIN_KEY_COL7)}; + +struct spi_imx_master pcm037_spi1_master = { + .chipselect = pcm037_spi1_cs, + .num_chipselect = ARRAY_SIZE(pcm037_spi1_cs), +}; +#endif + +/* GPIO-keys input device */ +static struct gpio_keys_button pcm037_gpio_keys[] = { + { + .type = EV_KEY, + .code = KEY_L, + .gpio = 0, + .desc = "Wheel Manual", + .wakeup = 0, + }, { + .type = EV_KEY, + .code = KEY_A, + .gpio = 1, + .desc = "Wheel AF", + .wakeup = 0, + }, { + .type = EV_KEY, + .code = KEY_V, + .gpio = 2, + .desc = "Wheel View", + .wakeup = 0, + }, { + .type = EV_KEY, + .code = KEY_M, + .gpio = 3, + .desc = "Wheel Menu", + .wakeup = 0, + }, { + .type = EV_KEY, + .code = KEY_UP, + .gpio = 32, + .desc = "Nav Pad Up", + .wakeup = 0, + }, { + .type = EV_KEY, + .code = KEY_RIGHT, + .gpio = 33, + .desc = "Nav Pad Right", + .wakeup = 0, + }, { + .type = EV_KEY, + .code = KEY_DOWN, + .gpio = 34, + .desc = "Nav Pad Down", + .wakeup = 0, + }, { + .type = EV_KEY, + .code = KEY_LEFT, + .gpio = 35, + .desc = "Nav Pad Left", + .wakeup = 0, + }, { + .type = EV_KEY, + .code = KEY_ENTER, + .gpio = 38, + .desc = "Nav Pad Ok", + .wakeup = 0, + }, { + .type = EV_KEY, + .code = KEY_O, + .gpio = 39, + .desc = "Wheel Off", + .wakeup = 0, + }, { + .type = EV_KEY, + .code = BTN_FORWARD, + .gpio = 50, + .desc = "Focus Forward", + .wakeup = 0, + }, { + .type = EV_KEY, + .code = BTN_BACK, + .gpio = 51, + .desc = "Focus Backward", + .wakeup = 0, + }, { + .type = EV_KEY, + .code = BTN_MIDDLE, + .gpio = 52, + .desc = "Release Half", + .wakeup = 0, + }, { + .type = EV_KEY, + .code = BTN_EXTRA, + .gpio = 53, + .desc = "Release Full", + .wakeup = 0, + }, +}; + +static struct gpio_keys_platform_data pcm037_gpio_keys_platform_data = { + .buttons = pcm037_gpio_keys, + .nbuttons = ARRAY_SIZE(pcm037_gpio_keys), + .rep = 0, /* No auto-repeat */ +}; + +static struct platform_device pcm037_gpio_keys_device = { + .name = "gpio-keys", + .id = -1, + .dev = { + .platform_data = &pcm037_gpio_keys_platform_data, + }, +}; + +static int eet_init_devices(void) +{ + if (!machine_is_pcm037() || pcm037_variant() != PCM037_EET) + return 0; + + mxc_iomux_setup_multiple_pins(pcm037_eet_pins, + ARRAY_SIZE(pcm037_eet_pins), "pcm037_eet"); + + /* SPI */ + spi_register_board_info(pcm037_spi_dev, ARRAY_SIZE(pcm037_spi_dev)); +#if defined(CONFIG_SPI_IMX) || defined(CONFIG_SPI_IMX_MODULE) + mxc_register_device(&mxc_spi_device0, &pcm037_spi1_master); +#endif + + platform_device_register(&pcm037_gpio_keys_device); + + return 0; +} + +late_initcall(eet_init_devices); -- cgit v1.2.3 From 04a820ead0838c76e9c1242feb5e71048bf3e9dc Mon Sep 17 00:00:00 2001 From: Andres Salomon Date: Tue, 30 Jun 2009 02:14:00 -0400 Subject: olpc_battery: Fix up eeprom read function The eeprom read function was placing values into the wrong place in 'buf'; we were starting from buf[off], rather than buf[0]. Also, the for loop that we were using was much uglier than it needed to be. This cleans it up a bit. Signed-off-by: Andres Salomon Signed-off-by: Anton Vorontsov --- drivers/power/olpc_battery.c | 17 +++++++++-------- 1 file changed, 9 insertions(+), 8 deletions(-) diff --git a/drivers/power/olpc_battery.c b/drivers/power/olpc_battery.c index 5fbca2681ba..9c216dd4155 100644 --- a/drivers/power/olpc_battery.c +++ b/drivers/power/olpc_battery.c @@ -8,6 +8,7 @@ * published by the Free Software Foundation. */ +#include #include #include #include @@ -334,21 +335,21 @@ static ssize_t olpc_bat_eeprom_read(struct kobject *kobj, struct bin_attribute *attr, char *buf, loff_t off, size_t count) { uint8_t ec_byte; - int ret, end; + int ret; + int i; if (off >= EEPROM_SIZE) return 0; if (off + count > EEPROM_SIZE) count = EEPROM_SIZE - off; - end = EEPROM_START + off + count; - for (ec_byte = EEPROM_START + off; ec_byte < end; ec_byte++) { - ret = olpc_ec_cmd(EC_BAT_EEPROM, &ec_byte, 1, - &buf[ec_byte - EEPROM_START], 1); + for (i = 0; i < count; i++) { + ec_byte = EEPROM_START + off + i; + ret = olpc_ec_cmd(EC_BAT_EEPROM, &ec_byte, 1, &buf[i], 1); if (ret) { - printk(KERN_ERR "olpc-battery: EC command " - "EC_BAT_EEPROM @ 0x%x failed -" - " %d!\n", ec_byte, ret); + pr_err("olpc-battery: " + "EC_BAT_EEPROM cmd @ 0x%x failed - %d!\n", + ec_byte, ret); return -EIO; } } -- cgit v1.2.3 From 8f7e57985fa794ab6afdcd3642581d9e1fe6de31 Mon Sep 17 00:00:00 2001 From: Andres Salomon Date: Tue, 30 Jun 2009 02:16:17 -0400 Subject: olpc_battery: Ensure that the TRICKLE bit is checked There are times when the battery is present but trickle charging, and the EC sets only the TRICKLE bit. So we must check for the bit when we're checking the charging/present status. Signed-off-by: Andres Salomon Signed-off-by: Anton Vorontsov --- drivers/power/olpc_battery.c | 9 ++++++--- 1 file changed, 6 insertions(+), 3 deletions(-) diff --git a/drivers/power/olpc_battery.c b/drivers/power/olpc_battery.c index 9c216dd4155..58e419299cd 100644 --- a/drivers/power/olpc_battery.c +++ b/drivers/power/olpc_battery.c @@ -36,6 +36,7 @@ #define BAT_STAT_AC 0x10 #define BAT_STAT_CHARGING 0x20 #define BAT_STAT_DISCHARGING 0x40 +#define BAT_STAT_TRICKLE 0x80 #define BAT_ERR_INFOFAIL 0x02 #define BAT_ERR_OVERVOLTAGE 0x04 @@ -90,7 +91,7 @@ static char bat_serial[17]; /* Ick */ static int olpc_bat_get_status(union power_supply_propval *val, uint8_t ec_byte) { if (olpc_platform_info.ecver > 0x44) { - if (ec_byte & BAT_STAT_CHARGING) + if (ec_byte & (BAT_STAT_CHARGING | BAT_STAT_TRICKLE)) val->intval = POWER_SUPPLY_STATUS_CHARGING; else if (ec_byte & BAT_STAT_DISCHARGING) val->intval = POWER_SUPPLY_STATUS_DISCHARGING; @@ -220,7 +221,8 @@ static int olpc_bat_get_property(struct power_supply *psy, It doesn't matter though -- the EC will return the last-known information, and it's as if we just ran that _little_ bit faster and managed to read it out before the battery went away. */ - if (!(ec_byte & BAT_STAT_PRESENT) && psp != POWER_SUPPLY_PROP_PRESENT) + if (!(ec_byte & (BAT_STAT_PRESENT | BAT_STAT_TRICKLE)) && + psp != POWER_SUPPLY_PROP_PRESENT) return -ENODEV; switch (psp) { @@ -230,7 +232,8 @@ static int olpc_bat_get_property(struct power_supply *psy, return ret; break; case POWER_SUPPLY_PROP_PRESENT: - val->intval = !!(ec_byte & BAT_STAT_PRESENT); + val->intval = !!(ec_byte & (BAT_STAT_PRESENT | + BAT_STAT_TRICKLE)); break; case POWER_SUPPLY_PROP_HEALTH: -- cgit v1.2.3 From bfdb46ce8494eae30dbaae65c81e684e6db6228b Mon Sep 17 00:00:00 2001 From: Ryan Mallon Date: Thu, 18 Jun 2009 11:26:26 +1200 Subject: Add ds2782 battery gas gauge driver This patch adds a driver for ds2782 battery devices. Signed-off-by: Ryan Mallon Signed-off-by: Anton Vorontsov --- drivers/power/Kconfig | 7 + drivers/power/Makefile | 1 + drivers/power/ds2782_battery.c | 330 +++++++++++++++++++++++++++++++++++++++++ 3 files changed, 338 insertions(+) create mode 100644 drivers/power/ds2782_battery.c diff --git a/drivers/power/Kconfig b/drivers/power/Kconfig index 7eda34838bf..bdbc4f73fcd 100644 --- a/drivers/power/Kconfig +++ b/drivers/power/Kconfig @@ -43,6 +43,13 @@ config BATTERY_DS2760 help Say Y here to enable support for batteries with ds2760 chip. +config BATTERY_DS2782 + tristate "DS2782 standalone gas-gauge" + depends on I2C + help + Say Y here to enable support for the DS2782 standalone battery + gas-gauge. + config BATTERY_PMU tristate "Apple PMU battery" depends on PPC32 && ADB_PMU diff --git a/drivers/power/Makefile b/drivers/power/Makefile index daf3179689a..380d17c9ae2 100644 --- a/drivers/power/Makefile +++ b/drivers/power/Makefile @@ -19,6 +19,7 @@ obj-$(CONFIG_APM_POWER) += apm_power.o obj-$(CONFIG_WM8350_POWER) += wm8350_power.o obj-$(CONFIG_BATTERY_DS2760) += ds2760_battery.o +obj-$(CONFIG_BATTERY_DS2782) += ds2782_battery.o obj-$(CONFIG_BATTERY_PMU) += pmu_battery.o obj-$(CONFIG_BATTERY_OLPC) += olpc_battery.o obj-$(CONFIG_BATTERY_TOSA) += tosa_battery.o diff --git a/drivers/power/ds2782_battery.c b/drivers/power/ds2782_battery.c new file mode 100644 index 00000000000..da14f374cb6 --- /dev/null +++ b/drivers/power/ds2782_battery.c @@ -0,0 +1,330 @@ +/* + * I2C client/driver for the Maxim/Dallas DS2782 Stand-Alone Fuel Gauge IC + * + * Copyright (C) 2009 Bluewater Systems Ltd + * + * Author: Ryan Mallon + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + */ + +#include +#include +#include +#include +#include +#include +#include +#include + +#define DS2782_REG_RARC 0x06 /* Remaining active relative capacity */ + +#define DS2782_REG_VOLT_MSB 0x0c +#define DS2782_REG_TEMP_MSB 0x0a +#define DS2782_REG_CURRENT_MSB 0x0e + +/* EEPROM Block */ +#define DS2782_REG_RSNSP 0x69 /* Sense resistor value */ + +/* Current unit measurement in uA for a 1 milli-ohm sense resistor */ +#define DS2782_CURRENT_UNITS 1563 + +#define to_ds2782_info(x) container_of(x, struct ds2782_info, battery) + +struct ds2782_info { + struct i2c_client *client; + struct power_supply battery; + int id; +}; + +static DEFINE_IDR(battery_id); +static DEFINE_MUTEX(battery_lock); + +static inline int ds2782_read_reg(struct ds2782_info *info, int reg, u8 *val) +{ + int ret; + + ret = i2c_smbus_read_byte_data(info->client, reg); + if (ret < 0) { + dev_err(&info->client->dev, "register read failed\n"); + return ret; + } + + *val = ret; + return 0; +} + +static inline int ds2782_read_reg16(struct ds2782_info *info, int reg_msb, + s16 *val) +{ + int ret; + + ret = swab16(i2c_smbus_read_word_data(info->client, reg_msb)); + if (ret < 0) { + dev_err(&info->client->dev, "register read failed\n"); + return ret; + } + + *val = ret; + return 0; +} + +static int ds2782_get_temp(struct ds2782_info *info, int *temp) +{ + s16 raw; + int err; + + /* + * Temperature is measured in units of 0.125 degrees celcius, the + * power_supply class measures temperature in tenths of degrees + * celsius. The temperature value is stored as a 10 bit number, plus + * sign in the upper bits of a 16 bit register. + */ + err = ds2782_read_reg16(info, DS2782_REG_TEMP_MSB, &raw); + if (err) + return err; + *temp = ((raw / 32) * 125) / 100; + return 0; +} + +static int ds2782_get_current(struct ds2782_info *info, int *current_uA) +{ + int sense_res; + int err; + u8 sense_res_raw; + s16 raw; + + /* + * The units of measurement for current are dependent on the value of + * the sense resistor. + */ + err = ds2782_read_reg(info, DS2782_REG_RSNSP, &sense_res_raw); + if (err) + return err; + if (sense_res_raw == 0) { + dev_err(&info->client->dev, "sense resistor value is 0\n"); + return -ENXIO; + } + sense_res = 1000 / sense_res_raw; + + dev_dbg(&info->client->dev, "sense resistor = %d milli-ohms\n", + sense_res); + err = ds2782_read_reg16(info, DS2782_REG_CURRENT_MSB, &raw); + if (err) + return err; + *current_uA = raw * (DS2782_CURRENT_UNITS / sense_res); + return 0; +} + +static int ds2782_get_voltage(struct ds2782_info *info, int *voltage_uA) +{ + s16 raw; + int err; + + /* + * Voltage is measured in units of 4.88mV. The voltage is stored as + * a 10-bit number plus sign, in the upper bits of a 16-bit register + */ + err = ds2782_read_reg16(info, DS2782_REG_VOLT_MSB, &raw); + if (err) + return err; + *voltage_uA = (raw / 32) * 4800; + return 0; +} + +static int ds2782_get_capacity(struct ds2782_info *info, int *capacity) +{ + int err; + u8 raw; + + err = ds2782_read_reg(info, DS2782_REG_RARC, &raw); + if (err) + return err; + *capacity = raw; + return raw; +} + +static int ds2782_get_status(struct ds2782_info *info, int *status) +{ + int err; + int current_uA; + int capacity; + + err = ds2782_get_current(info, ¤t_uA); + if (err) + return err; + + err = ds2782_get_capacity(info, &capacity); + if (err) + return err; + + if (capacity == 100) + *status = POWER_SUPPLY_STATUS_FULL; + else if (current_uA == 0) + *status = POWER_SUPPLY_STATUS_NOT_CHARGING; + else if (current_uA < 0) + *status = POWER_SUPPLY_STATUS_DISCHARGING; + else + *status = POWER_SUPPLY_STATUS_CHARGING; + + return 0; +} + +static int ds2782_battery_get_property(struct power_supply *psy, + enum power_supply_property prop, + union power_supply_propval *val) +{ + struct ds2782_info *info = to_ds2782_info(psy); + int ret; + + switch (prop) { + case POWER_SUPPLY_PROP_STATUS: + ret = ds2782_get_status(info, &val->intval); + break; + + case POWER_SUPPLY_PROP_CAPACITY: + ret = ds2782_get_capacity(info, &val->intval); + break; + + case POWER_SUPPLY_PROP_VOLTAGE_NOW: + ret = ds2782_get_voltage(info, &val->intval); + break; + + case POWER_SUPPLY_PROP_CURRENT_NOW: + ret = ds2782_get_current(info, &val->intval); + break; + + case POWER_SUPPLY_PROP_TEMP: + ret = ds2782_get_temp(info, &val->intval); + break; + + default: + ret = -EINVAL; + } + + return ret; +} + +static enum power_supply_property ds2782_battery_props[] = { + POWER_SUPPLY_PROP_STATUS, + POWER_SUPPLY_PROP_CAPACITY, + POWER_SUPPLY_PROP_VOLTAGE_NOW, + POWER_SUPPLY_PROP_CURRENT_NOW, + POWER_SUPPLY_PROP_TEMP, +}; + +static void ds2782_power_supply_init(struct power_supply *battery) +{ + battery->type = POWER_SUPPLY_TYPE_BATTERY; + battery->properties = ds2782_battery_props; + battery->num_properties = ARRAY_SIZE(ds2782_battery_props); + battery->get_property = ds2782_battery_get_property; + battery->external_power_changed = NULL; +} + +static int ds2782_battery_remove(struct i2c_client *client) +{ + struct ds2782_info *info = i2c_get_clientdata(client); + + power_supply_unregister(&info->battery); + kfree(info->battery.name); + + mutex_lock(&battery_lock); + idr_remove(&battery_id, info->id); + mutex_unlock(&battery_lock); + + i2c_set_clientdata(client, info); + + kfree(info); + return 0; +} + +static int ds2782_battery_probe(struct i2c_client *client, + const struct i2c_device_id *id) +{ + struct ds2782_info *info; + int ret; + int num; + + /* Get an ID for this battery */ + ret = idr_pre_get(&battery_id, GFP_KERNEL); + if (ret == 0) { + ret = -ENOMEM; + goto fail_id; + } + + mutex_lock(&battery_lock); + ret = idr_get_new(&battery_id, client, &num); + mutex_unlock(&battery_lock); + if (ret < 0) + goto fail_id; + + info = kzalloc(sizeof(*info), GFP_KERNEL); + if (!info) { + ret = -ENOMEM; + goto fail_info; + } + + info->battery.name = kasprintf(GFP_KERNEL, "ds2782-%d", num); + if (!info->battery.name) { + ret = -ENOMEM; + goto fail_name; + } + + i2c_set_clientdata(client, info); + info->client = client; + ds2782_power_supply_init(&info->battery); + + ret = power_supply_register(&client->dev, &info->battery); + if (ret) { + dev_err(&client->dev, "failed to register battery\n"); + goto fail_register; + } + + return 0; + +fail_register: + kfree(info->battery.name); +fail_name: + i2c_set_clientdata(client, info); + kfree(info); +fail_info: + mutex_lock(&battery_lock); + idr_remove(&battery_id, num); + mutex_unlock(&battery_lock); +fail_id: + return ret; +} + +static const struct i2c_device_id ds2782_id[] = { + {"ds2782", 0}, + {}, +}; + +static struct i2c_driver ds2782_battery_driver = { + .driver = { + .name = "ds2782-battery", + }, + .probe = ds2782_battery_probe, + .remove = ds2782_battery_remove, + .id_table = ds2782_id, +}; + +static int __init ds2782_init(void) +{ + return i2c_add_driver(&ds2782_battery_driver); +} +module_init(ds2782_init); + +static void __exit ds2782_exit(void) +{ + i2c_del_driver(&ds2782_battery_driver); +} +module_exit(ds2782_exit); + +MODULE_AUTHOR("Ryan Mallon "); +MODULE_DESCRIPTION("Maxim/Dallas DS2782 Stand-Alone Fuel Gauage IC driver"); +MODULE_LICENSE("GPL"); -- cgit v1.2.3 From 3f1f7cf08ddf10ef7fbf06d881582c95b9747f4e Mon Sep 17 00:00:00 2001 From: Joe Perches Date: Wed, 1 Jul 2009 11:32:10 +0200 Subject: netfilter: add netfilter git to MAINTAINERS Signed-off-by: Joe Perches Signed-off-by: Patrick McHardy --- MAINTAINERS | 1 + 1 file changed, 1 insertion(+) diff --git a/MAINTAINERS b/MAINTAINERS index fa2a16def17..a5042dea134 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -4044,6 +4044,7 @@ L: netfilter@vger.kernel.org L: coreteam@netfilter.org W: http://www.netfilter.org/ W: http://www.iptables.org/ +T: git://git.kernel.org/pub/scm/linux/kernel/git/kaber/nf-2.6.git S: Supported F: include/linux/netfilter* F: include/linux/netfilter/ -- cgit v1.2.3 From daf4219dbcbb2efcd638fcd3c29a622e1c18cc38 Mon Sep 17 00:00:00 2001 From: Dan Williams Date: Wed, 1 Jul 2009 16:12:53 -0700 Subject: dmaengine: move HIGHMEM64G restriction to ASYNC_TX_DMA On HIGHMEM64G systems dma_addr_t is known to be larger than (void *) which precludes async_xor from performing dma address conversions by reusing the input parameter address list. However, other parts of the dmaengine infrastructure do not suffer this constraint, so the HIGHMEM64G restriction can be down-levelled. Signed-off-by: Dan Williams --- crypto/async_tx/async_xor.c | 2 +- drivers/dma/Kconfig | 4 ++-- 2 files changed, 3 insertions(+), 3 deletions(-) diff --git a/crypto/async_tx/async_xor.c b/crypto/async_tx/async_xor.c index 95fe2c8d6c5..90dd3f8bd28 100644 --- a/crypto/async_tx/async_xor.c +++ b/crypto/async_tx/async_xor.c @@ -300,7 +300,7 @@ EXPORT_SYMBOL_GPL(async_xor_zero_sum); static int __init async_xor_init(void) { - #ifdef CONFIG_DMA_ENGINE + #ifdef CONFIG_ASYNC_TX_DMA /* To conserve stack space the input src_list (array of page pointers) * is reused to hold the array of dma addresses passed to the driver. * This conversion is only possible when dma_addr_t is less than the diff --git a/drivers/dma/Kconfig b/drivers/dma/Kconfig index 3b3c01b6f1e..babf214a509 100644 --- a/drivers/dma/Kconfig +++ b/drivers/dma/Kconfig @@ -4,7 +4,7 @@ menuconfig DMADEVICES bool "DMA Engine support" - depends on !HIGHMEM64G && HAS_DMA + depends on HAS_DMA help DMA engines can do asynchronous data transfers without involving the host CPU. Currently, this framework can be @@ -100,7 +100,7 @@ config NET_DMA config ASYNC_TX_DMA bool "Async_tx: Offload support for the async_tx api" - depends on DMA_ENGINE + depends on DMA_ENGINE && !HIGHMEM64G help This allows the async_tx api to take advantage of offload engines for memcpy, memset, xor, and raid6 p+q operations. If your platform has -- cgit v1.2.3 From 87e8824b4588076409692b82ef4b1d98f25cd400 Mon Sep 17 00:00:00 2001 From: Alessandro Rubini Date: Thu, 2 Jul 2009 15:28:41 +0100 Subject: [ARM] 5582/1: VIC: support ST-modified version with a split init The Nomadik SoC (not yet merged) has a modified PL090 VIC cell. This adds support for it by reading the PrimeCell ID at the end of the page and calling a separate init function. Signed-off-by: Alessandro Rubini Acked-by: Andrea Gallo Signed-off-by: Russell King --- arch/arm/common/vic.c | 88 +++++++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 88 insertions(+) diff --git a/arch/arm/common/vic.c b/arch/arm/common/vic.c index 6ed89836e90..27714ab30f2 100644 --- a/arch/arm/common/vic.c +++ b/arch/arm/common/vic.c @@ -259,6 +259,15 @@ static struct irq_chip vic_chip = { .set_wake = vic_set_wake, }; +/* The PL190 cell from ARM has been modified by ST, so handle both here */ +static void vik_init_st(void __iomem *base, unsigned int irq_start, + u32 vic_sources); + +enum vic_vendor { + VENDOR_ARM = 0x41, + VENDOR_ST = 0x80, +}; + /** * vic_init - initialise a vectored interrupt controller * @base: iomem base address @@ -270,6 +279,28 @@ void __init vic_init(void __iomem *base, unsigned int irq_start, u32 vic_sources, u32 resume_sources) { unsigned int i; + u32 cellid = 0; + enum vic_vendor vendor; + + /* Identify which VIC cell this one is, by reading the ID */ + for (i = 0; i < 4; i++) { + u32 addr = ((u32)base & PAGE_MASK) + 0xfe0 + (i * 4); + cellid |= (readl(addr) & 0xff) << (8 * i); + } + vendor = (cellid >> 12) & 0xff; + printk(KERN_INFO "VIC @%p: id 0x%08x, vendor 0x%02x\n", + base, cellid, vendor); + + switch(vendor) { + case VENDOR_ST: + vik_init_st(base, irq_start, vic_sources); + return; + default: + printk(KERN_WARNING "VIC: unknown vendor, continuing anyways\n"); + /* fall through */ + case VENDOR_ARM: + break; + } /* Disable all interrupts initially. */ @@ -306,3 +337,60 @@ void __init vic_init(void __iomem *base, unsigned int irq_start, vic_pm_register(base, irq_start, resume_sources); } + +/* + * The PL190 cell from ARM has been modified by ST to handle 64 interrupts. + * The original cell has 32 interrupts, while the modified one has 64, + * replocating two blocks 0x00..0x1f in 0x20..0x3f. In that case + * the probe function is called twice, with base set to offset 000 + * and 020 within the page. We call this "second block". + */ +static void __init vik_init_st(void __iomem *base, unsigned int irq_start, + u32 vic_sources) +{ + unsigned int i; + int vic_2nd_block = ((unsigned long)base & ~PAGE_MASK) != 0; + + /* Disable all interrupts initially. */ + + writel(0, base + VIC_INT_SELECT); + writel(0, base + VIC_INT_ENABLE); + writel(~0, base + VIC_INT_ENABLE_CLEAR); + writel(0, base + VIC_IRQ_STATUS); + writel(0, base + VIC_ITCR); + writel(~0, base + VIC_INT_SOFT_CLEAR); + + /* + * Make sure we clear all existing interrupts. The vector registers + * in this cell are after the second block of general registers, + * so we can address them using standard offsets, but only from + * the second base address, which is 0x20 in the page + */ + if (vic_2nd_block) { + writel(0, base + VIC_PL190_VECT_ADDR); + for (i = 0; i < 19; i++) { + unsigned int value; + + value = readl(base + VIC_PL190_VECT_ADDR); + writel(value, base + VIC_PL190_VECT_ADDR); + } + /* ST has 16 vectors as well, but we don't enable them by now */ + for (i = 0; i < 16; i++) { + void __iomem *reg = base + VIC_VECT_CNTL0 + (i * 4); + writel(0, reg); + } + + writel(32, base + VIC_PL190_DEF_VECT_ADDR); + } + + for (i = 0; i < 32; i++) { + if (vic_sources & (1 << i)) { + unsigned int irq = irq_start + i; + + set_irq_chip(irq, &vic_chip); + set_irq_chip_data(irq, base); + set_irq_handler(irq, handle_level_irq); + set_irq_flags(irq, IRQF_VALID | IRQF_PROBE); + } + } +} -- cgit v1.2.3 From 8c81b52422147b4b09f5adb8d0c6963342a336c6 Mon Sep 17 00:00:00 2001 From: Alessandro Rubini Date: Thu, 2 Jul 2009 15:28:52 +0100 Subject: [ARM] 5583/1: VIC: acknowledge software interrupts The PrimeCell Vectored Interrupt Controller offers a way to trigger any interrupt through software. This is a useful tool for developing, but such software interrupt can only be acked by writing a bit in the "software clear" register, or the handler will loop forever. This splits ack from mask, and acks the soft irq in case it was the source. Signed-off-by: Alessandro Rubini Acked-by: Andrea Gallo Acked-by: Linus Walleij Signed-off-by: Russell King --- arch/arm/common/vic.c | 11 ++++++++++- 1 file changed, 10 insertions(+), 1 deletion(-) diff --git a/arch/arm/common/vic.c b/arch/arm/common/vic.c index 27714ab30f2..bc1f9ad61ff 100644 --- a/arch/arm/common/vic.c +++ b/arch/arm/common/vic.c @@ -26,6 +26,15 @@ #include #include +static void vic_ack_irq(unsigned int irq) +{ + void __iomem *base = get_irq_chip_data(irq); + irq &= 31; + writel(1 << irq, base + VIC_INT_ENABLE_CLEAR); + /* moreover, clear the soft-triggered, in case it was the reason */ + writel(1 << irq, base + VIC_INT_SOFT_CLEAR); +} + static void vic_mask_irq(unsigned int irq) { void __iomem *base = get_irq_chip_data(irq); @@ -253,7 +262,7 @@ static inline void vic_pm_register(void __iomem *base, unsigned int irq, u32 arg static struct irq_chip vic_chip = { .name = "VIC", - .ack = vic_mask_irq, + .ack = vic_ack_irq, .mask = vic_mask_irq, .unmask = vic_unmask_irq, .set_wake = vic_set_wake, -- cgit v1.2.3 From 28ad94ec61dc60207dbffdb95ff870c617fbb832 Mon Sep 17 00:00:00 2001 From: Alessandro Rubini Date: Thu, 2 Jul 2009 19:06:47 +0100 Subject: [ARM] 5590/1: Add basic support for ST Nomadik 8815 SoC and evaluation board This patch adds the basic infrastructure for the Nomadik 8815 CPU and the "Nomadik Hardware Kit" NHK8815. This patch only includes the serial console and core stuff, no drivers. Signed-off-by: Alessandro Rubini Acked-by: Andrea Gallo Signed-off-by: Russell King --- arch/arm/Kconfig | 15 +++ arch/arm/Makefile | 1 + arch/arm/mach-nomadik/Kconfig | 14 ++ arch/arm/mach-nomadik/Makefile | 16 +++ arch/arm/mach-nomadik/Makefile.boot | 4 + arch/arm/mach-nomadik/board-nhk8815.c | 75 +++++++++++ arch/arm/mach-nomadik/clock.c | 45 +++++++ arch/arm/mach-nomadik/clock.h | 14 ++ arch/arm/mach-nomadik/cpu-8815.c | 58 ++++++++ arch/arm/mach-nomadik/include/mach/clkdev.h | 7 + arch/arm/mach-nomadik/include/mach/debug-macro.S | 22 +++ arch/arm/mach-nomadik/include/mach/entry-macro.S | 43 ++++++ arch/arm/mach-nomadik/include/mach/hardware.h | 90 +++++++++++++ arch/arm/mach-nomadik/include/mach/io.h | 22 +++ arch/arm/mach-nomadik/include/mach/irqs.h | 82 ++++++++++++ arch/arm/mach-nomadik/include/mach/memory.h | 28 ++++ arch/arm/mach-nomadik/include/mach/mtu.h | 45 +++++++ arch/arm/mach-nomadik/include/mach/setup.h | 22 +++ arch/arm/mach-nomadik/include/mach/system.h | 45 +++++++ arch/arm/mach-nomadik/include/mach/timex.h | 6 + arch/arm/mach-nomadik/include/mach/uncompress.h | 63 +++++++++ arch/arm/mach-nomadik/include/mach/vmalloc.h | 2 + arch/arm/mach-nomadik/timer.c | 164 +++++++++++++++++++++++ 23 files changed, 883 insertions(+) create mode 100644 arch/arm/mach-nomadik/Kconfig create mode 100644 arch/arm/mach-nomadik/Makefile create mode 100644 arch/arm/mach-nomadik/Makefile.boot create mode 100644 arch/arm/mach-nomadik/board-nhk8815.c create mode 100644 arch/arm/mach-nomadik/clock.c create mode 100644 arch/arm/mach-nomadik/clock.h create mode 100644 arch/arm/mach-nomadik/cpu-8815.c create mode 100644 arch/arm/mach-nomadik/include/mach/clkdev.h create mode 100644 arch/arm/mach-nomadik/include/mach/debug-macro.S create mode 100644 arch/arm/mach-nomadik/include/mach/entry-macro.S create mode 100644 arch/arm/mach-nomadik/include/mach/hardware.h create mode 100644 arch/arm/mach-nomadik/include/mach/io.h create mode 100644 arch/arm/mach-nomadik/include/mach/irqs.h create mode 100644 arch/arm/mach-nomadik/include/mach/memory.h create mode 100644 arch/arm/mach-nomadik/include/mach/mtu.h create mode 100644 arch/arm/mach-nomadik/include/mach/setup.h create mode 100644 arch/arm/mach-nomadik/include/mach/system.h create mode 100644 arch/arm/mach-nomadik/include/mach/timex.h create mode 100644 arch/arm/mach-nomadik/include/mach/uncompress.h create mode 100644 arch/arm/mach-nomadik/include/mach/vmalloc.h create mode 100644 arch/arm/mach-nomadik/timer.c diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index aef63c8e3d2..d8cfd706501 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -327,6 +327,19 @@ config ARCH_H720X help This enables support for systems based on the Hynix HMS720x +config ARCH_NOMADIK + bool "STMicroelectronics Nomadik" + select ARM_AMBA + select ARM_VIC + select CPU_ARM926T + select HAVE_CLK + select COMMON_CLKDEV + select GENERIC_TIME + select GENERIC_CLOCKEVENTS + + help + Support for the Nomadik platform by ST-Ericsson + config ARCH_IOP13XX bool "IOP13xx-based" depends on MMU @@ -716,6 +729,8 @@ source "arch/arm/mach-at91/Kconfig" source "arch/arm/plat-mxc/Kconfig" +source "arch/arm/mach-nomadik/Kconfig" + source "arch/arm/mach-netx/Kconfig" source "arch/arm/mach-ns9xxx/Kconfig" diff --git a/arch/arm/Makefile b/arch/arm/Makefile index c877d6df23d..97cca075d0f 100644 --- a/arch/arm/Makefile +++ b/arch/arm/Makefile @@ -137,6 +137,7 @@ machine-$(CONFIG_ARCH_MX1) := mx1 machine-$(CONFIG_ARCH_MX2) := mx2 machine-$(CONFIG_ARCH_MX3) := mx3 machine-$(CONFIG_ARCH_NETX) := netx +machine-$(CONFIG_ARCH_NOMADIK) := nomadik machine-$(CONFIG_ARCH_NS9XXX) := ns9xxx machine-$(CONFIG_ARCH_OMAP1) := omap1 machine-$(CONFIG_ARCH_OMAP2) := omap2 diff --git a/arch/arm/mach-nomadik/Kconfig b/arch/arm/mach-nomadik/Kconfig new file mode 100644 index 00000000000..abce2346106 --- /dev/null +++ b/arch/arm/mach-nomadik/Kconfig @@ -0,0 +1,14 @@ +if ARCH_NOMADIK + +menu "Nomadik boards" + +config MACH_NOMADIK_8815NHK + bool "ST 8815 Nomadik Hardware Kit (evaluation board)" + select NOMADIK_8815 + +endmenu + +config NOMADIK_8815 + bool + +endif diff --git a/arch/arm/mach-nomadik/Makefile b/arch/arm/mach-nomadik/Makefile new file mode 100644 index 00000000000..fa97769fe70 --- /dev/null +++ b/arch/arm/mach-nomadik/Makefile @@ -0,0 +1,16 @@ +# +# Makefile for the linux kernel. +# +# Note! Dependencies are done automagically by 'make dep', which also +# removes any old dependencies. DON'T put your own dependencies here +# unless it's something special (ie not a .c file). + +# Object file lists. + +obj-y += clock.o timer.o + +# Cpu revision +obj-$(CONFIG_NOMADIK_8815) += cpu-8815.o + +# Specific board support +obj-$(CONFIG_MACH_NOMADIK_8815NHK) += board-nhk8815.o diff --git a/arch/arm/mach-nomadik/Makefile.boot b/arch/arm/mach-nomadik/Makefile.boot new file mode 100644 index 00000000000..c7e75acfe6c --- /dev/null +++ b/arch/arm/mach-nomadik/Makefile.boot @@ -0,0 +1,4 @@ + zreladdr-y := 0x00008000 +params_phys-y := 0x00000100 +initrd_phys-y := 0x00800000 + diff --git a/arch/arm/mach-nomadik/board-nhk8815.c b/arch/arm/mach-nomadik/board-nhk8815.c new file mode 100644 index 00000000000..eebca614d36 --- /dev/null +++ b/arch/arm/mach-nomadik/board-nhk8815.c @@ -0,0 +1,75 @@ +/* + * linux/arch/arm/mach-nomadik/board-8815nhk.c + * + * Copyright (C) STMicroelectronics + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2, as + * published by the Free Software Foundation. + * + * NHK15 board specifc driver definition + */ +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include "clock.h" + +#define __MEM_4K_RESOURCE(x) \ + .res = {.start = (x), .end = (x) + SZ_4K - 1, .flags = IORESOURCE_MEM} + +static struct amba_device uart0_device = { + .dev = { .init_name = "uart0" }, + __MEM_4K_RESOURCE(NOMADIK_UART0_BASE), + .irq = {IRQ_UART0, NO_IRQ}, +}; + +static struct amba_device uart1_device = { + .dev = { .init_name = "uart1" }, + __MEM_4K_RESOURCE(NOMADIK_UART1_BASE), + .irq = {IRQ_UART1, NO_IRQ}, +}; + +static struct amba_device *amba_devs[] __initdata = { + &uart0_device, + &uart1_device, +}; + +/* We have a fixed clock alone, by now */ +static struct clk nhk8815_clk_48 = { + .rate = 48*1000*1000, +}; + +static struct platform_device *nhk8815_platform_devices[] __initdata = { + /* currently empty, will add keypad, touchscreen etc */ +}; + +static void __init nhk8815_platform_init(void) +{ + int i; + + cpu8815_platform_init(); + platform_add_devices(nhk8815_platform_devices, + ARRAY_SIZE(nhk8815_platform_devices)); + + for (i = 0; i < ARRAY_SIZE(amba_devs); i++) { + nmdk_clk_create(&nhk8815_clk_48, amba_devs[i]->dev.init_name); + amba_device_register(amba_devs[i], &iomem_resource); + } +} + +MACHINE_START(NOMADIK, "NHK8815") + /* Maintainer: ST MicroElectronics */ + .phys_io = NOMADIK_UART0_BASE, + .io_pg_offst = (IO_ADDRESS(NOMADIK_UART0_BASE) >> 18) & 0xfffc, + .boot_params = 0x100, + .map_io = cpu8815_map_io, + .init_irq = cpu8815_init_irq, + .timer = &nomadik_timer, + .init_machine = nhk8815_platform_init, +MACHINE_END diff --git a/arch/arm/mach-nomadik/clock.c b/arch/arm/mach-nomadik/clock.c new file mode 100644 index 00000000000..9f92502a008 --- /dev/null +++ b/arch/arm/mach-nomadik/clock.c @@ -0,0 +1,45 @@ +/* + * linux/arch/arm/mach-nomadik/clock.c + * + * Copyright (C) 2009 Alessandro Rubini + */ +#include +#include +#include +#include +#include +#include "clock.h" + +/* + * The nomadik board uses generic clocks, but the serial pl011 file + * calls clk_enable(), clk_disable(), clk_get_rate(), so we provide them + */ +unsigned long clk_get_rate(struct clk *clk) +{ + return clk->rate; +} +EXPORT_SYMBOL(clk_get_rate); + +/* enable and disable do nothing */ +int clk_enable(struct clk *clk) +{ + return 0; +} +EXPORT_SYMBOL(clk_enable); + +void clk_disable(struct clk *clk) +{ +} +EXPORT_SYMBOL(clk_disable); + +/* Create a clock structure with the given name */ +int nmdk_clk_create(struct clk *clk, const char *dev_id) +{ + struct clk_lookup *clkdev; + + clkdev = clkdev_alloc(clk, NULL, dev_id); + if (!clkdev) + return -ENOMEM; + clkdev_add(clkdev); + return 0; +} diff --git a/arch/arm/mach-nomadik/clock.h b/arch/arm/mach-nomadik/clock.h new file mode 100644 index 00000000000..235faec7f62 --- /dev/null +++ b/arch/arm/mach-nomadik/clock.h @@ -0,0 +1,14 @@ + +/* + * linux/arch/arm/mach-nomadik/clock.h + * + * Copyright (C) 2009 Alessandro Rubini + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +struct clk { + unsigned long rate; +}; +extern int nmdk_clk_create(struct clk *clk, const char *dev_id); diff --git a/arch/arm/mach-nomadik/cpu-8815.c b/arch/arm/mach-nomadik/cpu-8815.c new file mode 100644 index 00000000000..dec42da6956 --- /dev/null +++ b/arch/arm/mach-nomadik/cpu-8815.c @@ -0,0 +1,58 @@ +/* + * Copyright STMicroelectronics, 2007. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#include +#include +#include + +#include +#include +#include +#include + +/* All SoC devices live in the same area (see hardware.h) */ +static struct map_desc nomadik_io_desc[] __initdata = { + { + .virtual = NOMADIK_IO_VIRTUAL, + .pfn = __phys_to_pfn(NOMADIK_IO_PHYSICAL), + .length = NOMADIK_IO_SIZE, + .type = MT_DEVICE, + } + /* static ram and secured ram may be added later */ +}; + +void __init cpu8815_map_io(void) +{ + iotable_init(nomadik_io_desc, ARRAY_SIZE(nomadik_io_desc)); +} + +void __init cpu8815_init_irq(void) +{ + /* This modified VIC cell has two register blocks, at 0 and 0x20 */ + vic_init(io_p2v(NOMADIK_IC_BASE + 0x00), IRQ_VIC_START + 0, ~0, 0); + vic_init(io_p2v(NOMADIK_IC_BASE + 0x20), IRQ_VIC_START + 32, ~0, 0); +} + +/* + * This function is called from the board init ("init_machine"). + * Currently nothing is done as we can't register amba devs so early. + */ + void __init cpu8815_platform_init(void) +{ + return; +} diff --git a/arch/arm/mach-nomadik/include/mach/clkdev.h b/arch/arm/mach-nomadik/include/mach/clkdev.h new file mode 100644 index 00000000000..04b37a89801 --- /dev/null +++ b/arch/arm/mach-nomadik/include/mach/clkdev.h @@ -0,0 +1,7 @@ +#ifndef __ASM_MACH_CLKDEV_H +#define __ASM_MACH_CLKDEV_H + +#define __clk_get(clk) ({ 1; }) +#define __clk_put(clk) do { } while (0) + +#endif diff --git a/arch/arm/mach-nomadik/include/mach/debug-macro.S b/arch/arm/mach-nomadik/include/mach/debug-macro.S new file mode 100644 index 00000000000..e876990e156 --- /dev/null +++ b/arch/arm/mach-nomadik/include/mach/debug-macro.S @@ -0,0 +1,22 @@ +/* + * Debugging macro include header + * + * Copyright (C) 1994-1999 Russell King + * Moved from linux/arch/arm/kernel/debug.S by Ben Dooks + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * +*/ + + .macro addruart,rx + mrc p15, 0, \rx, c1, c0 + tst \rx, #1 @ MMU enabled? + moveq \rx, #0x10000000 @ physical base address + movne \rx, #0xf0000000 @ virtual base + add \rx, \rx, #0x00100000 + add \rx, \rx, #0x000fb000 + .endm + +#include diff --git a/arch/arm/mach-nomadik/include/mach/entry-macro.S b/arch/arm/mach-nomadik/include/mach/entry-macro.S new file mode 100644 index 00000000000..49f1aa3bb42 --- /dev/null +++ b/arch/arm/mach-nomadik/include/mach/entry-macro.S @@ -0,0 +1,43 @@ +/* + * Low-level IRQ helper macros for Nomadik platforms + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +#include +#include + + .macro disable_fiq + .endm + + .macro get_irqnr_preamble, base, tmp + ldr \base, =IO_ADDRESS(NOMADIK_IC_BASE) + .endm + + .macro arch_ret_to_user, tmp1, tmp2 + .endm + + .macro get_irqnr_and_base, irqnr, irqstat, base, tmp + + /* This stanza gets the irq mask from one of two status registers */ + mov \irqnr, #0 + ldr \irqstat, [\base, #VIC_REG_IRQSR0] @ get masked status + cmp \irqstat, #0 + bne 1001f + add \irqnr, \irqnr, #32 + ldr \irqstat, [\base, #VIC_REG_IRQSR1] @ get masked status + +1001: tst \irqstat, #15 + bne 1002f + add \irqnr, \irqnr, #4 + movs \irqstat, \irqstat, lsr #4 + bne 1001b +1002: tst \irqstat, #1 + bne 1003f + add \irqnr, \irqnr, #1 + movs \irqstat, \irqstat, lsr #1 + bne 1002b +1003: /* EQ will be set if no irqs pending */ + .endm diff --git a/arch/arm/mach-nomadik/include/mach/hardware.h b/arch/arm/mach-nomadik/include/mach/hardware.h new file mode 100644 index 00000000000..6316dba3bfc --- /dev/null +++ b/arch/arm/mach-nomadik/include/mach/hardware.h @@ -0,0 +1,90 @@ +/* + * This file contains the hardware definitions of the Nomadik. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * YOU should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ +#ifndef __ASM_ARCH_HARDWARE_H +#define __ASM_ARCH_HARDWARE_H + +/* Nomadik registers live from 0x1000.0000 to 0x1023.0000 -- currently */ +#define NOMADIK_IO_VIRTUAL 0xF0000000 /* VA of IO */ +#define NOMADIK_IO_PHYSICAL 0x10000000 /* PA of IO */ +#define NOMADIK_IO_SIZE 0x00300000 /* 3MB for all regs */ + +/* used in C code, so cast to proper type */ +#define io_p2v(x) ((void __iomem *)(x) \ + - NOMADIK_IO_PHYSICAL + NOMADIK_IO_VIRTUAL) +#define io_v2p(x) ((unsigned long)(x) \ + - NOMADIK_IO_VIRTUAL + NOMADIK_IO_PHYSICAL) + +/* used in asm code, so no casts */ +#define IO_ADDRESS(x) ((x) - NOMADIK_IO_PHYSICAL + NOMADIK_IO_VIRTUAL) + +/* + * Base address defination for Nomadik Onchip Logic Block + */ +#define NOMADIK_FSMC_BASE 0x10100000 /* FSMC registers */ +#define NOMADIK_SDRAMC_BASE 0x10110000 /* SDRAM Controller */ +#define NOMADIK_CLCDC_BASE 0x10120000 /* CLCD Controller */ +#define NOMADIK_MDIF_BASE 0x10120000 /* MDIF */ +#define NOMADIK_DMA0_BASE 0x10130000 /* DMA0 Controller */ +#define NOMADIK_IC_BASE 0x10140000 /* Vectored Irq Controller */ +#define NOMADIK_DMA1_BASE 0x10150000 /* DMA1 Controller */ +#define NOMADIK_USB_BASE 0x10170000 /* USB-OTG conf reg base */ +#define NOMADIK_CRYP_BASE 0x10180000 /* Crypto processor */ +#define NOMADIK_SHA1_BASE 0x10190000 /* SHA-1 Processor */ +#define NOMADIK_XTI_BASE 0x101A0000 /* XTI */ +#define NOMADIK_RNG_BASE 0x101B0000 /* Random number generator */ +#define NOMADIK_SRC_BASE 0x101E0000 /* SRC base */ +#define NOMADIK_WDOG_BASE 0x101E1000 /* Watchdog */ +#define NOMADIK_MTU0_BASE 0x101E2000 /* Multiple Timer 0 */ +#define NOMADIK_MTU1_BASE 0x101E3000 /* Multiple Timer 1 */ +#define NOMADIK_GPIO0_BASE 0x101E4000 /* GPIO0 */ +#define NOMADIK_GPIO1_BASE 0x101E5000 /* GPIO1 */ +#define NOMADIK_GPIO2_BASE 0x101E6000 /* GPIO2 */ +#define NOMADIK_GPIO3_BASE 0x101E7000 /* GPIO3 */ +#define NOMADIK_RTC_BASE 0x101E8000 /* Real Time Clock base */ +#define NOMADIK_PMU_BASE 0x101E9000 /* Power Management Unit */ +#define NOMADIK_OWM_BASE 0x101EA000 /* One wire master */ +#define NOMADIK_SCR_BASE 0x101EF000 /* Secure Control registers */ +#define NOMADIK_MSP2_BASE 0x101F0000 /* MSP 2 interface */ +#define NOMADIK_MSP1_BASE 0x101F1000 /* MSP 1 interface */ +#define NOMADIK_UART2_BASE 0x101F2000 /* UART 2 interface */ +#define NOMADIK_SSIRx_BASE 0x101F3000 /* SSI 8-ch rx interface */ +#define NOMADIK_SSITx_BASE 0x101F4000 /* SSI 8-ch tx interface */ +#define NOMADIK_MSHC_BASE 0x101F5000 /* Memory Stick(Pro) Host */ +#define NOMADIK_SDI_BASE 0x101F6000 /* SD-card/MM-Card */ +#define NOMADIK_I2C1_BASE 0x101F7000 /* I2C1 interface */ +#define NOMADIK_I2C0_BASE 0x101F8000 /* I2C0 interface */ +#define NOMADIK_MSP0_BASE 0x101F9000 /* MSP 0 interface */ +#define NOMADIK_FIRDA_BASE 0x101FA000 /* FIrDA interface */ +#define NOMADIK_UART1_BASE 0x101FB000 /* UART 1 interface */ +#define NOMADIK_SSP_BASE 0x101FC000 /* SSP interface */ +#define NOMADIK_UART0_BASE 0x101FD000 /* UART 0 interface */ +#define NOMADIK_SGA_BASE 0x101FE000 /* SGA interface */ +#define NOMADIK_L2CC_BASE 0x10210000 /* L2 Cache controller */ + +/* Other ranges, not for p2v/v2p */ +#define NOMADIK_BACKUP_RAM 0x80010000 +#define NOMADIK_EBROM 0x80000000 /* Embedded boot ROM */ +#define NOMADIK_HAMACV_DMEM_BASE 0xA0100000 /* HAMACV Data Memory Start */ +#define NOMADIK_HAMACV_DMEM_END 0xA01FFFFF /* HAMACV Data Memory End */ +#define NOMADIK_HAMACA_DMEM 0xA0200000 /* HAMACA Data Memory Space */ + +#define NOMADIK_FSMC_VA IO_ADDRESS(NOMADIK_FSMC_BASE) +#define NOMADIK_MTU0_VA IO_ADDRESS(NOMADIK_MTU0_BASE) +#define NOMADIK_MTU1_VA IO_ADDRESS(NOMADIK_MTU1_BASE) + +#endif /* __ASM_ARCH_HARDWARE_H */ diff --git a/arch/arm/mach-nomadik/include/mach/io.h b/arch/arm/mach-nomadik/include/mach/io.h new file mode 100644 index 00000000000..2e1eca1b824 --- /dev/null +++ b/arch/arm/mach-nomadik/include/mach/io.h @@ -0,0 +1,22 @@ +/* + * arch/arm/mach-nomadik/include/mach/io.h (copied from mach-sa1100) + * + * Copyright (C) 1997-1999 Russell King + * + * Modifications: + * 06-12-1997 RMK Created. + * 07-04-1999 RMK Major cleanup + */ +#ifndef __ASM_ARM_ARCH_IO_H +#define __ASM_ARM_ARCH_IO_H + +#define IO_SPACE_LIMIT 0xffffffff + +/* + * We don't actually have real ISA nor PCI buses, but there is so many + * drivers out there that might just work if we fake them... + */ +#define __io(a) __typesafe_io(a) +#define __mem_pci(a) (a) + +#endif diff --git a/arch/arm/mach-nomadik/include/mach/irqs.h b/arch/arm/mach-nomadik/include/mach/irqs.h new file mode 100644 index 00000000000..8faabc56039 --- /dev/null +++ b/arch/arm/mach-nomadik/include/mach/irqs.h @@ -0,0 +1,82 @@ +/* + * mach-nomadik/include/mach/irqs.h + * + * Copyright (C) ST Microelectronics + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ +#ifndef __ASM_ARCH_IRQS_H +#define __ASM_ARCH_IRQS_H + +#include + +#define IRQ_VIC_START 0 /* first VIC interrupt is 0 */ + +/* + * Interrupt numbers generic for all Nomadik Chip cuts + */ +#define IRQ_WATCHDOG 0 +#define IRQ_SOFTINT 1 +#define IRQ_CRYPTO 2 +#define IRQ_OWM 3 +#define IRQ_MTU0 4 +#define IRQ_MTU1 5 +#define IRQ_GPIO0 6 +#define IRQ_GPIO1 7 +#define IRQ_GPIO2 8 +#define IRQ_GPIO3 9 +#define IRQ_RTC_RTT 10 +#define IRQ_SSP 11 +#define IRQ_UART0 12 +#define IRQ_DMA1 13 +#define IRQ_CLCD_MDIF 14 +#define IRQ_DMA0 15 +#define IRQ_PWRFAIL 16 +#define IRQ_UART1 17 +#define IRQ_FIRDA 18 +#define IRQ_MSP0 19 +#define IRQ_I2C0 20 +#define IRQ_I2C1 21 +#define IRQ_SDMMC 22 +#define IRQ_USBOTG 23 +#define IRQ_SVA_IT0 24 +#define IRQ_SVA_IT1 25 +#define IRQ_SAA_IT0 26 +#define IRQ_SAA_IT1 27 +#define IRQ_UART2 28 +#define IRQ_MSP2 31 +#define IRQ_L2CC 48 +#define IRQ_HPI 49 +#define IRQ_SKE 50 +#define IRQ_KP 51 +#define IRQ_MEMST 54 +#define IRQ_SGA_IT 58 +#define IRQ_USBM 60 +#define IRQ_MSP1 62 + +#define NOMADIK_SOC_NR_IRQS 64 + +/* After chip-specific IRQ numbers we have the GPIO ones */ +#define NOMADIK_NR_GPIO 128 /* last 4 not wired to pins */ +#define NOMADIK_GPIO_TO_IRQ(gpio) ((gpio) + NOMADIK_SOC_NR_IRQS) +#define NOMADIK_IRQ_TO_GPIO(irq) ((irq) - NOMADIK_SOC_NR_IRQS) +#define NR_IRQS NOMADIK_GPIO_TO_IRQ(NOMADIK_NR_GPIO) + +/* Following two are used by entry_macro.S, to access our dual-vic */ +#define VIC_REG_IRQSR0 0 +#define VIC_REG_IRQSR1 0x20 + +#endif /* __ASM_ARCH_IRQS_H */ + diff --git a/arch/arm/mach-nomadik/include/mach/memory.h b/arch/arm/mach-nomadik/include/mach/memory.h new file mode 100644 index 00000000000..1e5689d98ec --- /dev/null +++ b/arch/arm/mach-nomadik/include/mach/memory.h @@ -0,0 +1,28 @@ +/* + * mach-nomadik/include/mach/memory.h + * + * Copyright (C) 1999 ARM Limited + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ +#ifndef __ASM_ARCH_MEMORY_H +#define __ASM_ARCH_MEMORY_H + +/* + * Physical DRAM offset. + */ +#define PHYS_OFFSET UL(0x00000000) + +#endif diff --git a/arch/arm/mach-nomadik/include/mach/mtu.h b/arch/arm/mach-nomadik/include/mach/mtu.h new file mode 100644 index 00000000000..76da7f08533 --- /dev/null +++ b/arch/arm/mach-nomadik/include/mach/mtu.h @@ -0,0 +1,45 @@ +#ifndef __ASM_ARCH_MTU_H +#define __ASM_ARCH_MTU_H + +/* + * The MTU device hosts four different counters, with 4 set of + * registers. These are register names. + */ + +#define MTU_IMSC 0x00 /* Interrupt mask set/clear */ +#define MTU_RIS 0x04 /* Raw interrupt status */ +#define MTU_MIS 0x08 /* Masked interrupt status */ +#define MTU_ICR 0x0C /* Interrupt clear register */ + +/* per-timer registers take 0..3 as argument */ +#define MTU_LR(x) (0x10 + 0x10 * (x) + 0x00) /* Load value */ +#define MTU_VAL(x) (0x10 + 0x10 * (x) + 0x04) /* Current value */ +#define MTU_CR(x) (0x10 + 0x10 * (x) + 0x08) /* Control reg */ +#define MTU_BGLR(x) (0x10 + 0x10 * (x) + 0x0c) /* At next overflow */ + +/* bits for the control register */ +#define MTU_CRn_ENA 0x80 +#define MTU_CRn_PERIODIC 0x40 /* if 0 = free-running */ +#define MTU_CRn_PRESCALE_MASK 0x0c +#define MTU_CRn_PRESCALE_1 0x00 +#define MTU_CRn_PRESCALE_16 0x04 +#define MTU_CRn_PRESCALE_256 0x08 +#define MTU_CRn_32BITS 0x02 +#define MTU_CRn_ONESHOT 0x01 /* if 0 = wraps reloading from BGLR*/ + +/* Other registers are usual amba/primecell registers, currently not used */ +#define MTU_ITCR 0xff0 +#define MTU_ITOP 0xff4 + +#define MTU_PERIPH_ID0 0xfe0 +#define MTU_PERIPH_ID1 0xfe4 +#define MTU_PERIPH_ID2 0xfe8 +#define MTU_PERIPH_ID3 0xfeC + +#define MTU_PCELL0 0xff0 +#define MTU_PCELL1 0xff4 +#define MTU_PCELL2 0xff8 +#define MTU_PCELL3 0xffC + +#endif /* __ASM_ARCH_MTU_H */ + diff --git a/arch/arm/mach-nomadik/include/mach/setup.h b/arch/arm/mach-nomadik/include/mach/setup.h new file mode 100644 index 00000000000..a4e468cf63d --- /dev/null +++ b/arch/arm/mach-nomadik/include/mach/setup.h @@ -0,0 +1,22 @@ + +/* + * These symbols are needed for board-specific files to call their + * own cpu-specific files + */ + +#ifndef __ASM_ARCH_SETUP_H +#define __ASM_ARCH_SETUP_H + +#include +#include + +#ifdef CONFIG_NOMADIK_8815 + +extern void cpu8815_map_io(void); +extern void cpu8815_platform_init(void); +extern void cpu8815_init_irq(void); +extern struct sys_timer nomadik_timer; + +#endif /* NOMADIK_8815 */ + +#endif /* __ASM_ARCH_SETUP_H */ diff --git a/arch/arm/mach-nomadik/include/mach/system.h b/arch/arm/mach-nomadik/include/mach/system.h new file mode 100644 index 00000000000..7119f688116 --- /dev/null +++ b/arch/arm/mach-nomadik/include/mach/system.h @@ -0,0 +1,45 @@ +/* + * mach-nomadik/include/mach/system.h + * + * Copyright (C) 2008 STMicroelectronics + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ +#ifndef __ASM_ARCH_SYSTEM_H +#define __ASM_ARCH_SYSTEM_H + +#include +#include + +static inline void arch_idle(void) +{ + /* + * This should do all the clock switching + * and wait for interrupt tricks + */ + cpu_do_idle(); +} + +static inline void arch_reset(char mode, const char *cmd) +{ + void __iomem *src_rstsr = io_p2v(NOMADIK_SRC_BASE + 0x18); + + /* FIXME: use egpio when implemented */ + + /* Write anything to Reset status register */ + writel(1, src_rstsr); +} + +#endif diff --git a/arch/arm/mach-nomadik/include/mach/timex.h b/arch/arm/mach-nomadik/include/mach/timex.h new file mode 100644 index 00000000000..318b8896ce9 --- /dev/null +++ b/arch/arm/mach-nomadik/include/mach/timex.h @@ -0,0 +1,6 @@ +#ifndef __ASM_ARCH_TIMEX_H +#define __ASM_ARCH_TIMEX_H + +#define CLOCK_TICK_RATE 2400000 + +#endif diff --git a/arch/arm/mach-nomadik/include/mach/uncompress.h b/arch/arm/mach-nomadik/include/mach/uncompress.h new file mode 100644 index 00000000000..071003bc845 --- /dev/null +++ b/arch/arm/mach-nomadik/include/mach/uncompress.h @@ -0,0 +1,63 @@ +/* + * Copyright (C) 2008 STMicroelectronics + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#ifndef __ASM_ARCH_UNCOMPRESS_H +#define __ASM_ARCH_UNCOMPRESS_H + +#include +#include +#include + +/* we need the constants in amba/serial.h, but it refers to amba_device */ +struct amba_device; +#include + +#define NOMADIK_UART_DR 0x101FB000 +#define NOMADIK_UART_LCRH 0x101FB02c +#define NOMADIK_UART_CR 0x101FB030 +#define NOMADIK_UART_FR 0x101FB018 + +static void putc(const char c) +{ + /* Do nothing if the UART is not enabled. */ + if (!(readb(NOMADIK_UART_CR) & UART01x_CR_UARTEN)) + return; + + if (c == '\n') + putc('\r'); + + while (readb(NOMADIK_UART_FR) & UART01x_FR_TXFF) + barrier(); + writeb(c, NOMADIK_UART_DR); +} + +static void flush(void) +{ + if (!(readb(NOMADIK_UART_CR) & UART01x_CR_UARTEN)) + return; + while (readb(NOMADIK_UART_FR) & UART01x_FR_BUSY) + barrier(); +} + +static inline void arch_decomp_setup(void) +{ +} + +#define arch_decomp_wdog() /* nothing to do here */ + +#endif /* __ASM_ARCH_UNCOMPRESS_H */ diff --git a/arch/arm/mach-nomadik/include/mach/vmalloc.h b/arch/arm/mach-nomadik/include/mach/vmalloc.h new file mode 100644 index 00000000000..be12e31ea52 --- /dev/null +++ b/arch/arm/mach-nomadik/include/mach/vmalloc.h @@ -0,0 +1,2 @@ + +#define VMALLOC_END 0xe8000000 diff --git a/arch/arm/mach-nomadik/timer.c b/arch/arm/mach-nomadik/timer.c new file mode 100644 index 00000000000..d1738e7061d --- /dev/null +++ b/arch/arm/mach-nomadik/timer.c @@ -0,0 +1,164 @@ +/* + * linux/arch/arm/mach-nomadik/timer.c + * + * Copyright (C) 2008 STMicroelectronics + * Copyright (C) 2009 Alessandro Rubini, somewhat based on at91sam926x + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2, as + * published by the Free Software Foundation. + */ +#include +#include +#include +#include +#include +#include +#include +#include + +#define TIMER_CTRL 0x80 /* No divisor */ +#define TIMER_PERIODIC 0x40 +#define TIMER_SZ32BIT 0x02 + +/* Initial value for SRC control register: all timers use MXTAL/8 source */ +#define SRC_CR_INIT_MASK 0x00007fff +#define SRC_CR_INIT_VAL 0x2aaa8000 + +static u32 nmdk_count; /* accumulated count */ +static u32 nmdk_cycle; /* write-once */ +static __iomem void *mtu_base; + +/* + * clocksource: the MTU device is a decrementing counters, so we negate + * the value being read. + */ +static cycle_t nmdk_read_timer(struct clocksource *cs) +{ + u32 count = readl(mtu_base + MTU_VAL(0)); + return nmdk_count + nmdk_cycle - count; + +} + +static struct clocksource nmdk_clksrc = { + .name = "mtu_0", + .rating = 120, + .read = nmdk_read_timer, + .shift = 20, + .flags = CLOCK_SOURCE_IS_CONTINUOUS, +}; + +/* + * Clockevent device: currently only periodic mode is supported + */ +static void nmdk_clkevt_mode(enum clock_event_mode mode, + struct clock_event_device *dev) +{ + unsigned long flags; + + switch (mode) { + case CLOCK_EVT_MODE_PERIODIC: + /* enable interrupts -- and count current value? */ + raw_local_irq_save(flags); + writel(readl(mtu_base + MTU_IMSC) | 1, mtu_base + MTU_IMSC); + raw_local_irq_restore(flags); + break; + case CLOCK_EVT_MODE_ONESHOT: + BUG(); /* Not supported, yet */ + /* FALLTHROUGH */ + case CLOCK_EVT_MODE_SHUTDOWN: + case CLOCK_EVT_MODE_UNUSED: + /* disable irq */ + raw_local_irq_save(flags); + writel(readl(mtu_base + MTU_IMSC) & ~1, mtu_base + MTU_IMSC); + raw_local_irq_restore(flags); + break; + case CLOCK_EVT_MODE_RESUME: + break; + } +} + +static struct clock_event_device nmdk_clkevt = { + .name = "mtu_0", + .features = CLOCK_EVT_FEAT_PERIODIC, + .shift = 32, + .rating = 100, + .set_mode = nmdk_clkevt_mode, +}; + +/* + * IRQ Handler for the timer 0 of the MTU block. The irq is not shared + * as we are the only users of mtu0 by now. + */ +static irqreturn_t nmdk_timer_interrupt(int irq, void *dev_id) +{ + /* ack: "interrupt clear register" */ + writel( 1 << 0, mtu_base + MTU_ICR); + + /* we can't count lost ticks, unfortunately */ + nmdk_count += nmdk_cycle; + nmdk_clkevt.event_handler(&nmdk_clkevt); + + return IRQ_HANDLED; +} + +/* + * Set up timer interrupt, and return the current time in seconds. + */ +static struct irqaction nmdk_timer_irq = { + .name = "Nomadik Timer Tick", + .flags = IRQF_DISABLED | IRQF_TIMER, + .handler = nmdk_timer_interrupt, +}; + +static void nmdk_timer_reset(void) +{ + u32 cr; + + writel(0, mtu_base + MTU_CR(0)); /* off */ + + /* configure load and background-load, and fire it up */ + writel(nmdk_cycle, mtu_base + MTU_LR(0)); + writel(nmdk_cycle, mtu_base + MTU_BGLR(0)); + cr = MTU_CRn_PERIODIC | MTU_CRn_PRESCALE_1 | MTU_CRn_32BITS; + writel(cr, mtu_base + MTU_CR(0)); + writel(cr | MTU_CRn_ENA, mtu_base + MTU_CR(0)); +} + +static void __init nmdk_timer_init(void) +{ + u32 src_cr; + unsigned long rate; + int bits; + + rate = CLOCK_TICK_RATE; /* 2.4MHz */ + nmdk_cycle = (rate + HZ/2) / HZ; + + /* Configure timer sources in "system reset controller" ctrl reg */ + src_cr = readl(io_p2v(NOMADIK_SRC_BASE)); + src_cr &= SRC_CR_INIT_MASK; + src_cr |= SRC_CR_INIT_VAL; + writel(src_cr, io_p2v(NOMADIK_SRC_BASE)); + + /* Save global pointer to mtu, used by functions above */ + mtu_base = io_p2v(NOMADIK_MTU0_BASE); + + /* Init the timer and register clocksource */ + nmdk_timer_reset(); + + nmdk_clksrc.mult = clocksource_hz2mult(rate, nmdk_clksrc.shift); + bits = 8*sizeof(nmdk_count); + nmdk_clksrc.mask = CLOCKSOURCE_MASK(bits); + + clocksource_register(&nmdk_clksrc); + + /* Register irq and clockevents */ + setup_irq(IRQ_MTU0, &nmdk_timer_irq); + nmdk_clkevt.mult = div_sc(rate, NSEC_PER_SEC, nmdk_clkevt.shift); + nmdk_clkevt.cpumask = cpumask_of(0); + clockevents_register_device(&nmdk_clkevt); +} + +struct sys_timer nomadik_timer = { + .init = nmdk_timer_init, +}; -- cgit v1.2.3 From 2ec1d3594563e0283873e24bb5d100dffee5d568 Mon Sep 17 00:00:00 2001 From: Alessandro Rubini Date: Thu, 2 Jul 2009 15:29:12 +0100 Subject: [ARM] 5584/1: nomadik: add gpio driver and devices Signed-off-by: Alessandro Rubini Acked-by: Andrea Gallo Signed-off-by: Russell King --- arch/arm/Kconfig | 3 +- arch/arm/mach-nomadik/Makefile | 2 +- arch/arm/mach-nomadik/cpu-8815.c | 75 ++++++ arch/arm/mach-nomadik/gpio.c | 396 ++++++++++++++++++++++++++++++ arch/arm/mach-nomadik/include/mach/gpio.h | 71 ++++++ 5 files changed, 545 insertions(+), 2 deletions(-) create mode 100644 arch/arm/mach-nomadik/gpio.c create mode 100644 arch/arm/mach-nomadik/include/mach/gpio.h diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index d8cfd706501..b1093d8786b 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -336,7 +336,8 @@ config ARCH_NOMADIK select COMMON_CLKDEV select GENERIC_TIME select GENERIC_CLOCKEVENTS - + select GENERIC_GPIO + select ARCH_REQUIRE_GPIOLIB help Support for the Nomadik platform by ST-Ericsson diff --git a/arch/arm/mach-nomadik/Makefile b/arch/arm/mach-nomadik/Makefile index fa97769fe70..3fc43543e6e 100644 --- a/arch/arm/mach-nomadik/Makefile +++ b/arch/arm/mach-nomadik/Makefile @@ -7,7 +7,7 @@ # Object file lists. -obj-y += clock.o timer.o +obj-y += clock.o timer.o gpio.o # Cpu revision obj-$(CONFIG_NOMADIK_8815) += cpu-8815.o diff --git a/arch/arm/mach-nomadik/cpu-8815.c b/arch/arm/mach-nomadik/cpu-8815.c index dec42da6956..9917a9abdb5 100644 --- a/arch/arm/mach-nomadik/cpu-8815.c +++ b/arch/arm/mach-nomadik/cpu-8815.c @@ -19,12 +19,87 @@ #include #include #include +#include +#include #include #include #include #include +/* The 8815 has 4 GPIO blocks, let's register them immediately */ +static struct nmk_gpio_platform_data cpu8815_gpio[] = { + { + .name = "GPIO-0-31", + .first_gpio = 0, + .first_irq = NOMADIK_GPIO_TO_IRQ(0), + .parent_irq = IRQ_GPIO0, + }, { + .name = "GPIO-32-63", + .first_gpio = 32, + .first_irq = NOMADIK_GPIO_TO_IRQ(32), + .parent_irq = IRQ_GPIO1, + }, { + .name = "GPIO-64-95", + .first_gpio = 64, + .first_irq = NOMADIK_GPIO_TO_IRQ(64), + .parent_irq = IRQ_GPIO2, + }, { + .name = "GPIO-96-127", /* 124..127 not routed to pin */ + .first_gpio = 96, + .first_irq = NOMADIK_GPIO_TO_IRQ(96), + .parent_irq = IRQ_GPIO3, + } +}; + +#define __MEM_4K_RESOURCE(x) \ + .res = {.start = (x), .end = (x) + SZ_4K - 1, .flags = IORESOURCE_MEM} + +static struct amba_device cpu8815_amba_gpio[] = { + { + .dev = { + .init_name = "gpio0", + .platform_data = cpu8815_gpio + 0, + }, + __MEM_4K_RESOURCE(NOMADIK_GPIO0_BASE), + }, { + .dev = { + .init_name = "gpio1", + .platform_data = cpu8815_gpio + 1, + }, + __MEM_4K_RESOURCE(NOMADIK_GPIO1_BASE), + }, { + .dev = { + .init_name = "gpio2", + .platform_data = cpu8815_gpio + 2, + }, + __MEM_4K_RESOURCE(NOMADIK_GPIO2_BASE), + }, { + .dev = { + .init_name = "gpio3", + .platform_data = cpu8815_gpio + 3, + }, + __MEM_4K_RESOURCE(NOMADIK_GPIO3_BASE), + }, +}; + +static struct amba_device *amba_devs[] __initdata = { + cpu8815_amba_gpio + 0, + cpu8815_amba_gpio + 1, + cpu8815_amba_gpio + 2, + cpu8815_amba_gpio + 3, +}; + +static int __init cpu8815_init(void) +{ + int i; + + for (i = 0; i < ARRAY_SIZE(amba_devs); i++) + amba_device_register(amba_devs[i], &iomem_resource); + return 0; +} +arch_initcall(cpu8815_init); + /* All SoC devices live in the same area (see hardware.h) */ static struct map_desc nomadik_io_desc[] __initdata = { { diff --git a/arch/arm/mach-nomadik/gpio.c b/arch/arm/mach-nomadik/gpio.c new file mode 100644 index 00000000000..9a09b2791e0 --- /dev/null +++ b/arch/arm/mach-nomadik/gpio.c @@ -0,0 +1,396 @@ +/* + * Generic GPIO driver for logic cells found in the Nomadik SoC + * + * Copyright (C) 2008,2009 STMicroelectronics + * Copyright (C) 2009 Alessandro Rubini + * Rewritten based on work by Prafulla WADASKAR + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include + +/* + * The GPIO module in the Nomadik family of Systems-on-Chip is an + * AMBA device, managing 32 pins and alternate functions. The logic block + * is currently only used in the Nomadik. + * + * Symbols in this file are called "nmk_gpio" for "nomadik gpio" + */ + +#define NMK_GPIO_PER_CHIP 32 +struct nmk_gpio_chip { + struct gpio_chip chip; + void __iomem *addr; + unsigned int parent_irq; + spinlock_t *lock; + /* Keep track of configured edges */ + u32 edge_rising; + u32 edge_falling; +}; + +/* Mode functions */ +int nmk_gpio_set_mode(int gpio, int gpio_mode) +{ + struct nmk_gpio_chip *nmk_chip; + unsigned long flags; + u32 afunc, bfunc, bit; + + nmk_chip = get_irq_chip_data(NOMADIK_GPIO_TO_IRQ(gpio)); + if (!nmk_chip) + return -EINVAL; + + bit = 1 << (gpio - nmk_chip->chip.base); + + spin_lock_irqsave(&nmk_chip->lock, flags); + afunc = readl(nmk_chip->addr + NMK_GPIO_AFSLA) & ~bit; + bfunc = readl(nmk_chip->addr + NMK_GPIO_AFSLB) & ~bit; + if (gpio_mode & NMK_GPIO_ALT_A) + afunc |= bit; + if (gpio_mode & NMK_GPIO_ALT_B) + bfunc |= bit; + writel(afunc, nmk_chip->addr + NMK_GPIO_AFSLA); + writel(bfunc, nmk_chip->addr + NMK_GPIO_AFSLB); + spin_unlock_irqrestore(&nmk_chip->lock, flags); + + return 0; +} +EXPORT_SYMBOL(nmk_gpio_set_mode); + +int nmk_gpio_get_mode(int gpio) +{ + struct nmk_gpio_chip *nmk_chip; + u32 afunc, bfunc, bit; + + nmk_chip = get_irq_chip_data(NOMADIK_GPIO_TO_IRQ(gpio)); + if (!nmk_chip) + return -EINVAL; + + bit = 1 << (gpio - nmk_chip->chip.base); + + afunc = readl(nmk_chip->addr + NMK_GPIO_AFSLA) & bit; + bfunc = readl(nmk_chip->addr + NMK_GPIO_AFSLB) & bit; + + return (afunc ? NMK_GPIO_ALT_A : 0) | (bfunc ? NMK_GPIO_ALT_B : 0); +} +EXPORT_SYMBOL(nmk_gpio_get_mode); + + +/* IRQ functions */ +static inline int nmk_gpio_get_bitmask(int gpio) +{ + return 1 << (gpio % 32); +} + +static void nmk_gpio_irq_ack(unsigned int irq) +{ + int gpio; + struct nmk_gpio_chip *nmk_chip; + + gpio = NOMADIK_IRQ_TO_GPIO(irq); + nmk_chip = get_irq_chip_data(irq); + if (!nmk_chip) + return; + writel(nmk_gpio_get_bitmask(gpio), nmk_chip->addr + NMK_GPIO_IC); +} + +static void nmk_gpio_irq_mask(unsigned int irq) +{ + int gpio; + struct nmk_gpio_chip *nmk_chip; + unsigned long flags; + u32 bitmask, reg; + + gpio = NOMADIK_IRQ_TO_GPIO(irq); + nmk_chip = get_irq_chip_data(irq); + bitmask = nmk_gpio_get_bitmask(gpio); + if (!nmk_chip) + return; + + /* we must individually clear the two edges */ + spin_lock_irqsave(&nmk_chip->lock, flags); + if (nmk_chip->edge_rising & bitmask) { + reg = readl(nmk_chip->addr + NMK_GPIO_RWIMSC); + reg &= ~bitmask; + writel(reg, nmk_chip->addr + NMK_GPIO_RWIMSC); + } + if (nmk_chip->edge_falling & bitmask) { + reg = readl(nmk_chip->addr + NMK_GPIO_FWIMSC); + reg &= ~bitmask; + writel(reg, nmk_chip->addr + NMK_GPIO_FWIMSC); + } + spin_unlock_irqrestore(&nmk_chip->lock, flags); +}; + +static void nmk_gpio_irq_unmask(unsigned int irq) +{ + int gpio; + struct nmk_gpio_chip *nmk_chip; + unsigned long flags; + u32 bitmask, reg; + + gpio = NOMADIK_IRQ_TO_GPIO(irq); + nmk_chip = get_irq_chip_data(irq); + bitmask = nmk_gpio_get_bitmask(gpio); + if (!nmk_chip) + return; + + /* we must individually set the two edges */ + spin_lock_irqsave(&nmk_chip->lock, flags); + if (nmk_chip->edge_rising & bitmask) { + reg = readl(nmk_chip->addr + NMK_GPIO_RWIMSC); + reg |= bitmask; + writel(reg, nmk_chip->addr + NMK_GPIO_RWIMSC); + } + if (nmk_chip->edge_falling & bitmask) { + reg = readl(nmk_chip->addr + NMK_GPIO_FWIMSC); + reg |= bitmask; + writel(reg, nmk_chip->addr + NMK_GPIO_FWIMSC); + } + spin_unlock_irqrestore(&nmk_chip->lock, flags); +} + +static int nmk_gpio_irq_set_type(unsigned int irq, unsigned int type) +{ + int gpio; + struct nmk_gpio_chip *nmk_chip; + unsigned long flags; + u32 bitmask; + + gpio = NOMADIK_IRQ_TO_GPIO(irq); + nmk_chip = get_irq_chip_data(irq); + bitmask = nmk_gpio_get_bitmask(gpio); + if (!nmk_chip) + return -EINVAL; + + if (type & IRQ_TYPE_LEVEL_HIGH) + return -EINVAL; + if (type & IRQ_TYPE_LEVEL_LOW) + return -EINVAL; + + spin_lock_irqsave(&nmk_chip->lock, flags); + + nmk_chip->edge_rising &= ~bitmask; + if (type & IRQ_TYPE_EDGE_RISING) + nmk_chip->edge_rising |= bitmask; + writel(nmk_chip->edge_rising, nmk_chip->addr + NMK_GPIO_RIMSC); + + nmk_chip->edge_falling &= ~bitmask; + if (type & IRQ_TYPE_EDGE_FALLING) + nmk_chip->edge_falling |= bitmask; + writel(nmk_chip->edge_falling, nmk_chip->addr + NMK_GPIO_FIMSC); + + spin_unlock_irqrestore(&nmk_chip->lock, flags); + + nmk_gpio_irq_unmask(irq); + + return 0; +} + +static struct irq_chip nmk_gpio_irq_chip = { + .name = "Nomadik-GPIO", + .ack = nmk_gpio_irq_ack, + .mask = nmk_gpio_irq_mask, + .unmask = nmk_gpio_irq_unmask, + .set_type = nmk_gpio_irq_set_type, +}; + +static void nmk_gpio_irq_handler(unsigned int irq, struct irq_desc *desc) +{ + struct nmk_gpio_chip *nmk_chip; + struct irq_chip *host_chip; + unsigned int gpio_irq; + u32 pending; + unsigned int first_irq; + + nmk_chip = get_irq_data(irq); + first_irq = NOMADIK_GPIO_TO_IRQ(nmk_chip->chip.base); + while ( (pending = readl(nmk_chip->addr + NMK_GPIO_IS)) ) { + gpio_irq = first_irq + __ffs(pending); + generic_handle_irq(gpio_irq); + } + if (0) {/* don't ack parent irq, as ack == disable */ + host_chip = get_irq_chip(irq); + host_chip->ack(irq); + } +} + +static int nmk_gpio_init_irq(struct nmk_gpio_chip *nmk_chip) +{ + unsigned int first_irq; + int i; + + first_irq = NOMADIK_GPIO_TO_IRQ(nmk_chip->chip.base); + for (i = first_irq; i < first_irq + NMK_GPIO_PER_CHIP; i++) { + set_irq_chip(i, &nmk_gpio_irq_chip); + set_irq_handler(i, handle_edge_irq); + set_irq_flags(i, IRQF_VALID); + set_irq_chip_data(i, nmk_chip); + } + set_irq_chained_handler(nmk_chip->parent_irq, nmk_gpio_irq_handler); + set_irq_data(nmk_chip->parent_irq, nmk_chip); + return 0; +} + +/* I/O Functions */ +static int nmk_gpio_make_input(struct gpio_chip *chip, unsigned offset) +{ + struct nmk_gpio_chip *nmk_chip = + container_of(chip, struct nmk_gpio_chip, chip); + + writel(1 << offset, nmk_chip->addr + NMK_GPIO_DIRC); + return 0; +} + +static int nmk_gpio_make_output(struct gpio_chip *chip, unsigned offset, + int val) +{ + struct nmk_gpio_chip *nmk_chip = + container_of(chip, struct nmk_gpio_chip, chip); + + writel(1 << offset, nmk_chip->addr + NMK_GPIO_DIRS); + return 0; +} + +static int nmk_gpio_get_input(struct gpio_chip *chip, unsigned offset) +{ + struct nmk_gpio_chip *nmk_chip = + container_of(chip, struct nmk_gpio_chip, chip); + u32 bit = 1 << offset; + + return (readl(nmk_chip->addr + NMK_GPIO_DAT) & bit) != 0; +} + +static void nmk_gpio_set_output(struct gpio_chip *chip, unsigned offset, + int val) +{ + struct nmk_gpio_chip *nmk_chip = + container_of(chip, struct nmk_gpio_chip, chip); + u32 bit = 1 << offset; + + if (val) + writel(bit, nmk_chip->addr + NMK_GPIO_DATS); + else + writel(bit, nmk_chip->addr + NMK_GPIO_DATC); +} + +/* This structure is replicated for each GPIO block allocated at probe time */ +static struct gpio_chip nmk_gpio_template = { + .direction_input = nmk_gpio_make_input, + .get = nmk_gpio_get_input, + .direction_output = nmk_gpio_make_output, + .set = nmk_gpio_set_output, + .ngpio = NMK_GPIO_PER_CHIP, + .can_sleep = 0, +}; + +static int __init nmk_gpio_probe(struct amba_device *dev, struct amba_id *id) +{ + struct nmk_gpio_platform_data *pdata; + struct nmk_gpio_chip *nmk_chip; + struct gpio_chip *chip; + int ret; + + pdata = dev->dev.platform_data; + ret = amba_request_regions(dev, pdata->name); + if (ret) + return ret; + + nmk_chip = kzalloc(sizeof(*nmk_chip), GFP_KERNEL); + if (!nmk_chip) { + ret = -ENOMEM; + goto out_amba; + } + /* + * The virt address in nmk_chip->addr is in the nomadik register space, + * so we can simply convert the resource address, without remapping + */ + nmk_chip->addr = io_p2v(dev->res.start); + nmk_chip->chip = nmk_gpio_template; + nmk_chip->parent_irq = pdata->parent_irq; + + chip = &nmk_chip->chip; + chip->base = pdata->first_gpio; + chip->label = pdata->name; + chip->dev = &dev->dev; + chip->owner = THIS_MODULE; + + ret = gpiochip_add(&nmk_chip->chip); + if (ret) + goto out_free; + + amba_set_drvdata(dev, nmk_chip); + + nmk_gpio_init_irq(nmk_chip); + + dev_info(&dev->dev, "Bits %i-%i at address %p\n", + nmk_chip->chip.base, nmk_chip->chip.base+31, nmk_chip->addr); + return 0; + + out_free: + kfree(nmk_chip); + out_amba: + amba_release_regions(dev); + dev_err(&dev->dev, "Failure %i for GPIO %i-%i\n", ret, + pdata->first_gpio, pdata->first_gpio+31); + return ret; +} + +static int nmk_gpio_remove(struct amba_device *dev) +{ + struct nmk_gpio_chip *nmk_chip; + + nmk_chip = amba_get_drvdata(dev); + gpiochip_remove(&nmk_chip->chip); + kfree(nmk_chip); + amba_release_regions(dev); + return 0; +} + + +/* We have 0x1f080060 and 0x1f180060, accept both using the mask */ +static struct amba_id nmk_gpio_ids[] = { + { + .id = 0x1f080060, + .mask = 0xffefffff, + }, + {0, 0}, +}; + +static struct amba_driver nmk_gpio_driver = { + .drv = { + .owner = THIS_MODULE, + .name = "gpio", + }, + .probe = nmk_gpio_probe, + .remove = nmk_gpio_remove, + .suspend = NULL, /* to be done */ + .resume = NULL, + .id_table = nmk_gpio_ids, +}; + +static int __init nmk_gpio_init(void) +{ + return amba_driver_register(&nmk_gpio_driver); +} + +arch_initcall(nmk_gpio_init); + +MODULE_AUTHOR("Prafulla WADASKAR and Alessandro Rubini"); +MODULE_DESCRIPTION("Nomadik GPIO Driver"); +MODULE_LICENSE("GPL"); + + diff --git a/arch/arm/mach-nomadik/include/mach/gpio.h b/arch/arm/mach-nomadik/include/mach/gpio.h new file mode 100644 index 00000000000..61577c9f9a7 --- /dev/null +++ b/arch/arm/mach-nomadik/include/mach/gpio.h @@ -0,0 +1,71 @@ +/* + * Structures and registers for GPIO access in the Nomadik SoC + * + * Copyright (C) 2008 STMicroelectronics + * Author: Prafulla WADASKAR + * Copyright (C) 2009 Alessandro Rubini + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +#ifndef __ASM_ARCH_GPIO_H +#define __ASM_ARCH_GPIO_H + +#include + +/* + * These currently cause a function call to happen, they may be optimized + * if needed by adding cpu-specific defines to identify blocks + * (see mach-pxa/include/mach/gpio.h as an example using GPLR etc) + */ +#define gpio_get_value __gpio_get_value +#define gpio_set_value __gpio_set_value +#define gpio_cansleep __gpio_cansleep +#define gpio_to_irq __gpio_to_irq + +/* + * "nmk_gpio" and "NMK_GPIO" stand for "Nomadik GPIO", leaving + * the "gpio" namespace for generic and cross-machine functions + */ + +/* Register in the logic block */ +#define NMK_GPIO_DAT 0x00 +#define NMK_GPIO_DATS 0x04 +#define NMK_GPIO_DATC 0x08 +#define NMK_GPIO_PDIS 0x0c +#define NMK_GPIO_DIR 0x10 +#define NMK_GPIO_DIRS 0x14 +#define NMK_GPIO_DIRC 0x18 +#define NMK_GPIO_SLPC 0x1c +#define NMK_GPIO_AFSLA 0x20 +#define NMK_GPIO_AFSLB 0x24 + +#define NMK_GPIO_RIMSC 0x40 +#define NMK_GPIO_FIMSC 0x44 +#define NMK_GPIO_IS 0x48 +#define NMK_GPIO_IC 0x4c +#define NMK_GPIO_RWIMSC 0x50 +#define NMK_GPIO_FWIMSC 0x54 +#define NMK_GPIO_WKS 0x58 + +/* Alternate functions: function C is set in hw by setting both A and B */ +#define NMK_GPIO_ALT_GPIO 0 +#define NMK_GPIO_ALT_A 1 +#define NMK_GPIO_ALT_B 2 +#define NMK_GPIO_ALT_C (NMK_GPIO_ALT_A | NMK_GPIO_ALT_B) + +extern int nmk_gpio_set_mode(int gpio, int gpio_mode); +extern int nmk_gpio_get_mode(int gpio); + +/* + * Platform data to register a block: only the initial gpio/irq number. + */ +struct nmk_gpio_platform_data { + char *name; + int first_gpio; + int first_irq; + int parent_irq; +}; + +#endif /* __ASM_ARCH_GPIO_H */ -- cgit v1.2.3 From 63796b740b888b396eb0cc78917d755693cc224c Mon Sep 17 00:00:00 2001 From: Alessandro Rubini Date: Thu, 2 Jul 2009 15:29:22 +0100 Subject: [ARM] 5585/1: nomadik: add gpio-i2c devices Signed-off-by: Alessandro Rubini Acked-by: Andrea Gallo Signed-off-by: Russell King --- arch/arm/mach-nomadik/Kconfig | 7 ++++ arch/arm/mach-nomadik/Makefile | 3 ++ arch/arm/mach-nomadik/i2c-8815nhk.c | 65 +++++++++++++++++++++++++++++++++++++ 3 files changed, 75 insertions(+) create mode 100644 arch/arm/mach-nomadik/i2c-8815nhk.c diff --git a/arch/arm/mach-nomadik/Kconfig b/arch/arm/mach-nomadik/Kconfig index abce2346106..2a02b49c40f 100644 --- a/arch/arm/mach-nomadik/Kconfig +++ b/arch/arm/mach-nomadik/Kconfig @@ -11,4 +11,11 @@ endmenu config NOMADIK_8815 bool + +config I2C_BITBANG_8815NHK + tristate "Driver for bit-bang busses found on the 8815 NHK" + depends on I2C && MACH_NOMADIK_8815NHK + select I2C_ALGOBIT + default y + endif diff --git a/arch/arm/mach-nomadik/Makefile b/arch/arm/mach-nomadik/Makefile index 3fc43543e6e..412040982a4 100644 --- a/arch/arm/mach-nomadik/Makefile +++ b/arch/arm/mach-nomadik/Makefile @@ -14,3 +14,6 @@ obj-$(CONFIG_NOMADIK_8815) += cpu-8815.o # Specific board support obj-$(CONFIG_MACH_NOMADIK_8815NHK) += board-nhk8815.o + +# Nomadik extra devices +obj-$(CONFIG_I2C_BITBANG_8815NHK) += i2c-8815nhk.o diff --git a/arch/arm/mach-nomadik/i2c-8815nhk.c b/arch/arm/mach-nomadik/i2c-8815nhk.c new file mode 100644 index 00000000000..abfe25a08d6 --- /dev/null +++ b/arch/arm/mach-nomadik/i2c-8815nhk.c @@ -0,0 +1,65 @@ +#include +#include +#include +#include +#include +#include +#include + +/* + * There are two busses in the 8815NHK. + * They could, in theory, be driven by the hardware component, but we + * use bit-bang through GPIO by now, to keep things simple + */ + +static struct i2c_gpio_platform_data nhk8815_i2c_data0 = { + /* keep defaults for timeouts; pins are push-pull bidirectional */ + .scl_pin = 62, + .sda_pin = 63, +}; + +static struct i2c_gpio_platform_data nhk8815_i2c_data1 = { + /* keep defaults for timeouts; pins are push-pull bidirectional */ + .scl_pin = 53, + .sda_pin = 54, +}; + +/* first bus: GPIO XX and YY */ +static struct platform_device nhk8815_i2c_dev0 = { + .name = "i2c-gpio", + .id = 0, + .dev = { + .platform_data = &nhk8815_i2c_data0, + }, +}; +/* second bus: GPIO XX and YY */ +static struct platform_device nhk8815_i2c_dev1 = { + .name = "i2c-gpio", + .id = 1, + .dev = { + .platform_data = &nhk8815_i2c_data1, + }, +}; + +static int __init nhk8815_i2c_init(void) +{ + nmk_gpio_set_mode(nhk8815_i2c_data0.scl_pin, NMK_GPIO_ALT_GPIO); + nmk_gpio_set_mode(nhk8815_i2c_data0.sda_pin, NMK_GPIO_ALT_GPIO); + platform_device_register(&nhk8815_i2c_dev0); + + nmk_gpio_set_mode(nhk8815_i2c_data1.scl_pin, NMK_GPIO_ALT_GPIO); + nmk_gpio_set_mode(nhk8815_i2c_data1.sda_pin, NMK_GPIO_ALT_GPIO); + platform_device_register(&nhk8815_i2c_dev1); + + return 0; +} + +static void __exit nhk8815_i2c_exit(void) +{ + platform_device_unregister(&nhk8815_i2c_dev0); + platform_device_unregister(&nhk8815_i2c_dev1); + return; +} + +module_init(nhk8815_i2c_init); +module_exit(nhk8815_i2c_exit); -- cgit v1.2.3 From 725b1f9d86822246e5a1237bf97d2783857d8a3a Mon Sep 17 00:00:00 2001 From: Alessandro Rubini Date: Thu, 2 Jul 2009 15:29:32 +0100 Subject: [ARM] 5586/1: nomadik board: added ethernet Signed-off-by: Alessandro Rubini Acked-by: Andrea Gallo Signed-off-by: Russell King --- arch/arm/mach-nomadik/board-nhk8815.c | 38 ++++++++++++++++++++++++++++++++++- 1 file changed, 37 insertions(+), 1 deletion(-) diff --git a/arch/arm/mach-nomadik/board-nhk8815.c b/arch/arm/mach-nomadik/board-nhk8815.c index eebca614d36..79bdea943eb 100644 --- a/arch/arm/mach-nomadik/board-nhk8815.c +++ b/arch/arm/mach-nomadik/board-nhk8815.c @@ -14,6 +14,8 @@ #include #include #include +#include +#include #include #include #include @@ -45,8 +47,42 @@ static struct clk nhk8815_clk_48 = { .rate = 48*1000*1000, }; +static struct resource nhk8815_eth_resources[] = { + { + .name = "smc91x-regs", + .start = 0x34000000 + 0x300, + .end = 0x34000000 + SZ_64K - 1, + .flags = IORESOURCE_MEM, + }, { + .start = NOMADIK_GPIO_TO_IRQ(115), + .end = NOMADIK_GPIO_TO_IRQ(115), + .flags = IORESOURCE_IRQ | IRQF_TRIGGER_RISING, + } +}; + +static struct platform_device nhk8815_eth_device = { + .name = "smc91x", + .resource = nhk8815_eth_resources, + .num_resources = ARRAY_SIZE(nhk8815_eth_resources), +}; + +static int __init nhk8815_eth_init(void) +{ + int gpio_nr = 115; /* hardwired in the board */ + int err; + + err = gpio_request(gpio_nr, "eth_irq"); + if (!err) err = nmk_gpio_set_mode(gpio_nr, NMK_GPIO_ALT_GPIO); + if (!err) err = gpio_direction_input(gpio_nr); + if (err) + pr_err("Error %i in %s\n", err, __func__); + return err; +} +device_initcall(nhk8815_eth_init); + static struct platform_device *nhk8815_platform_devices[] __initdata = { - /* currently empty, will add keypad, touchscreen etc */ + &nhk8815_eth_device, + /* will add more devices */ }; static void __init nhk8815_platform_init(void) -- cgit v1.2.3 From 0b260fd4b0eb7c90f9258bfa6317ae553319b5da Mon Sep 17 00:00:00 2001 From: Alessandro Rubini Date: Thu, 2 Jul 2009 15:29:43 +0100 Subject: [ARM] 5587/1: nomadik: add l2cc Signed-off-by: Alessandro Rubini Acked-by: Andrea Gallo Signed-off-by: Russell King --- arch/arm/mach-nomadik/cpu-8815.c | 8 +++++++- arch/arm/mm/Kconfig | 2 +- 2 files changed, 8 insertions(+), 2 deletions(-) diff --git a/arch/arm/mach-nomadik/cpu-8815.c b/arch/arm/mach-nomadik/cpu-8815.c index 9917a9abdb5..f93c5963419 100644 --- a/arch/arm/mach-nomadik/cpu-8815.c +++ b/arch/arm/mach-nomadik/cpu-8815.c @@ -27,6 +27,9 @@ #include #include +#include +#include + /* The 8815 has 4 GPIO blocks, let's register them immediately */ static struct nmk_gpio_platform_data cpu8815_gpio[] = { { @@ -125,9 +128,12 @@ void __init cpu8815_init_irq(void) /* * This function is called from the board init ("init_machine"). - * Currently nothing is done as we can't register amba devs so early. */ void __init cpu8815_platform_init(void) { +#ifdef CONFIG_CACHE_L2X0 + /* At full speed latency must be >=2, so 0x249 in low bits */ + l2x0_init(io_p2v(NOMADIK_L2CC_BASE), 0x00730249, 0xfe000fff); +#endif return; } diff --git a/arch/arm/mm/Kconfig b/arch/arm/mm/Kconfig index 83c025e72ce..5fe595aeba6 100644 --- a/arch/arm/mm/Kconfig +++ b/arch/arm/mm/Kconfig @@ -758,7 +758,7 @@ config CACHE_FEROCEON_L2_WRITETHROUGH config CACHE_L2X0 bool "Enable the L2x0 outer cache controller" depends on REALVIEW_EB_ARM11MP || MACH_REALVIEW_PB11MP || MACH_REALVIEW_PB1176 || \ - REALVIEW_EB_A9MP || ARCH_MX35 || ARCH_MX31 || MACH_REALVIEW_PBX + REALVIEW_EB_A9MP || ARCH_MX35 || ARCH_MX31 || MACH_REALVIEW_PBX || ARCH_NOMADIK default y select OUTER_CACHE help -- cgit v1.2.3 From c2b455474e4c6bc8bab6506e2a08dbd5ad50d74d Mon Sep 17 00:00:00 2001 From: Alessandro Rubini Date: Thu, 2 Jul 2009 15:29:53 +0100 Subject: [ARM] 5588/1: nomadik: add defconfig for nhk8815 Signed-off-by: Alessandro Rubini Acked-by: Andrea Gallo Signed-off-by: Russell King --- arch/arm/configs/nhk8815_defconfig | 1316 ++++++++++++++++++++++++++++++++++++ 1 file changed, 1316 insertions(+) create mode 100644 arch/arm/configs/nhk8815_defconfig diff --git a/arch/arm/configs/nhk8815_defconfig b/arch/arm/configs/nhk8815_defconfig new file mode 100644 index 00000000000..9bb45b932f0 --- /dev/null +++ b/arch/arm/configs/nhk8815_defconfig @@ -0,0 +1,1316 @@ +# +# Automatically generated make config: don't edit +# Linux kernel version: 2.6.30 +# Tue Jun 23 22:57:16 2009 +# +CONFIG_ARM=y +CONFIG_SYS_SUPPORTS_APM_EMULATION=y +CONFIG_GENERIC_GPIO=y +CONFIG_GENERIC_TIME=y +CONFIG_GENERIC_CLOCKEVENTS=y +CONFIG_MMU=y +CONFIG_GENERIC_HARDIRQS=y +CONFIG_STACKTRACE_SUPPORT=y +CONFIG_HAVE_LATENCYTOP_SUPPORT=y +CONFIG_LOCKDEP_SUPPORT=y +CONFIG_TRACE_IRQFLAGS_SUPPORT=y +CONFIG_HARDIRQS_SW_RESEND=y +CONFIG_GENERIC_IRQ_PROBE=y +CONFIG_RWSEM_GENERIC_SPINLOCK=y +CONFIG_GENERIC_HWEIGHT=y +CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y +CONFIG_VECTORS_BASE=0xffff0000 +CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" +CONFIG_CONSTRUCTORS=y + +# +# General setup +# +CONFIG_EXPERIMENTAL=y +CONFIG_BROKEN_ON_SMP=y +CONFIG_LOCK_KERNEL=y +CONFIG_INIT_ENV_ARG_LIMIT=32 +CONFIG_LOCALVERSION="" +# CONFIG_LOCALVERSION_AUTO is not set +# CONFIG_SWAP is not set +CONFIG_SYSVIPC=y +CONFIG_SYSVIPC_SYSCTL=y +# CONFIG_POSIX_MQUEUE is not set +# CONFIG_BSD_PROCESS_ACCT is not set +# CONFIG_TASKSTATS is not set +# CONFIG_AUDIT is not set + +# +# RCU Subsystem +# +CONFIG_CLASSIC_RCU=y +# CONFIG_TREE_RCU is not set +# CONFIG_PREEMPT_RCU is not set +# CONFIG_TREE_RCU_TRACE is not set +# CONFIG_PREEMPT_RCU_TRACE is not set +CONFIG_IKCONFIG=y +CONFIG_IKCONFIG_PROC=y +CONFIG_LOG_BUF_SHIFT=14 +# CONFIG_GROUP_SCHED is not set +# CONFIG_CGROUPS is not set +CONFIG_SYSFS_DEPRECATED=y +CONFIG_SYSFS_DEPRECATED_V2=y +# CONFIG_RELAY is not set +# CONFIG_NAMESPACES is not set +CONFIG_BLK_DEV_INITRD=y +CONFIG_INITRAMFS_SOURCE="" +CONFIG_RD_GZIP=y +# CONFIG_RD_BZIP2 is not set +# CONFIG_RD_LZMA is not set +CONFIG_CC_OPTIMIZE_FOR_SIZE=y +CONFIG_SYSCTL=y +CONFIG_ANON_INODES=y +CONFIG_EMBEDDED=y +CONFIG_UID16=y +CONFIG_SYSCTL_SYSCALL=y +CONFIG_KALLSYMS=y +CONFIG_KALLSYMS_ALL=y +# CONFIG_KALLSYMS_EXTRA_PASS is not set +CONFIG_HOTPLUG=y +CONFIG_PRINTK=y +CONFIG_BUG=y +CONFIG_ELF_CORE=y +CONFIG_BASE_FULL=y +CONFIG_FUTEX=y +CONFIG_EPOLL=y +CONFIG_SIGNALFD=y +CONFIG_TIMERFD=y +CONFIG_EVENTFD=y +CONFIG_SHMEM=y +CONFIG_AIO=y + +# +# Performance Counters +# +CONFIG_VM_EVENT_COUNTERS=y +# CONFIG_STRIP_ASM_SYMS is not set +CONFIG_COMPAT_BRK=y +CONFIG_SLAB=y +# CONFIG_SLUB is not set +# CONFIG_SLOB is not set +# CONFIG_PROFILING is not set +# CONFIG_MARKERS is not set +CONFIG_HAVE_OPROFILE=y +# CONFIG_KPROBES is not set +CONFIG_HAVE_KPROBES=y +CONFIG_HAVE_KRETPROBES=y +CONFIG_HAVE_CLK=y + +# +# GCOV-based kernel profiling +# +# CONFIG_SLOW_WORK is not set +CONFIG_HAVE_GENERIC_DMA_COHERENT=y +CONFIG_SLABINFO=y +CONFIG_RT_MUTEXES=y +CONFIG_BASE_SMALL=0 +CONFIG_MODULES=y +# CONFIG_MODULE_FORCE_LOAD is not set +CONFIG_MODULE_UNLOAD=y +# CONFIG_MODULE_FORCE_UNLOAD is not set +# CONFIG_MODVERSIONS is not set +# CONFIG_MODULE_SRCVERSION_ALL is not set +CONFIG_BLOCK=y +CONFIG_LBDAF=y +# CONFIG_BLK_DEV_BSG is not set +# CONFIG_BLK_DEV_INTEGRITY is not set + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +CONFIG_IOSCHED_AS=y +CONFIG_IOSCHED_DEADLINE=y +CONFIG_IOSCHED_CFQ=y +CONFIG_DEFAULT_AS=y +# CONFIG_DEFAULT_DEADLINE is not set +# CONFIG_DEFAULT_CFQ is not set +# CONFIG_DEFAULT_NOOP is not set +CONFIG_DEFAULT_IOSCHED="anticipatory" +CONFIG_FREEZER=y + +# +# System Type +# +# CONFIG_ARCH_AAEC2000 is not set +# CONFIG_ARCH_INTEGRATOR is not set +# CONFIG_ARCH_REALVIEW is not set +# CONFIG_ARCH_VERSATILE is not set +# CONFIG_ARCH_AT91 is not set +# CONFIG_ARCH_CLPS711X is not set +# CONFIG_ARCH_GEMINI is not set +# CONFIG_ARCH_EBSA110 is not set +# CONFIG_ARCH_EP93XX is not set +# CONFIG_ARCH_FOOTBRIDGE is not set +# CONFIG_ARCH_MXC is not set +# CONFIG_ARCH_STMP3XXX is not set +# CONFIG_ARCH_NETX is not set +# CONFIG_ARCH_H720X is not set +CONFIG_ARCH_NOMADIK=y +# CONFIG_ARCH_IOP13XX is not set +# CONFIG_ARCH_IOP32X is not set +# CONFIG_ARCH_IOP33X is not set +# CONFIG_ARCH_IXP23XX is not set +# CONFIG_ARCH_IXP2000 is not set +# CONFIG_ARCH_IXP4XX is not set +# CONFIG_ARCH_L7200 is not set +# CONFIG_ARCH_KIRKWOOD is not set +# CONFIG_ARCH_LOKI is not set +# CONFIG_ARCH_MV78XX0 is not set +# CONFIG_ARCH_ORION5X is not set +# CONFIG_ARCH_MMP is not set +# CONFIG_ARCH_KS8695 is not set +# CONFIG_ARCH_NS9XXX is not set +# CONFIG_ARCH_W90X900 is not set +# CONFIG_ARCH_PNX4008 is not set +# CONFIG_ARCH_PXA is not set +# CONFIG_ARCH_MSM is not set +# CONFIG_ARCH_RPC is not set +# CONFIG_ARCH_SA1100 is not set +# CONFIG_ARCH_S3C2410 is not set +# CONFIG_ARCH_S3C64XX is not set +# CONFIG_ARCH_SHARK is not set +# CONFIG_ARCH_LH7A40X is not set +# CONFIG_ARCH_U300 is not set +# CONFIG_ARCH_DAVINCI is not set +# CONFIG_ARCH_OMAP is not set + +# +# Nomadik boards +# +CONFIG_MACH_NOMADIK_8815NHK=y +CONFIG_NOMADIK_8815=y +CONFIG_I2C_BITBANG_8815NHK=y + +# +# Processor Type +# +CONFIG_CPU_32=y +CONFIG_CPU_ARM926T=y +CONFIG_CPU_32v5=y +CONFIG_CPU_ABRT_EV5TJ=y +CONFIG_CPU_PABRT_NOIFAR=y +CONFIG_CPU_CACHE_VIVT=y +CONFIG_CPU_COPY_V4WB=y +CONFIG_CPU_TLB_V4WBI=y +CONFIG_CPU_CP15=y +CONFIG_CPU_CP15_MMU=y + +# +# Processor Features +# +CONFIG_ARM_THUMB=y +# CONFIG_CPU_ICACHE_DISABLE is not set +# CONFIG_CPU_DCACHE_DISABLE is not set +# CONFIG_CPU_DCACHE_WRITETHROUGH is not set +# CONFIG_CPU_CACHE_ROUND_ROBIN is not set +CONFIG_OUTER_CACHE=y +CONFIG_CACHE_L2X0=y +CONFIG_ARM_VIC=y +CONFIG_ARM_VIC_NR=2 +CONFIG_COMMON_CLKDEV=y + +# +# Bus support +# +CONFIG_ARM_AMBA=y +# CONFIG_PCI_SYSCALL is not set +# CONFIG_ARCH_SUPPORTS_MSI is not set +# CONFIG_PCCARD is not set + +# +# Kernel Features +# +# CONFIG_NO_HZ is not set +# CONFIG_HIGH_RES_TIMERS is not set +CONFIG_GENERIC_CLOCKEVENTS_BUILD=y +CONFIG_VMSPLIT_3G=y +# CONFIG_VMSPLIT_2G is not set +# CONFIG_VMSPLIT_1G is not set +CONFIG_PAGE_OFFSET=0xC0000000 +CONFIG_PREEMPT=y +CONFIG_HZ=100 +CONFIG_AEABI=y +CONFIG_OABI_COMPAT=y +# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set +# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set +# CONFIG_HIGHMEM is not set +CONFIG_SELECT_MEMORY_MODEL=y +CONFIG_FLATMEM_MANUAL=y +# CONFIG_DISCONTIGMEM_MANUAL is not set +# CONFIG_SPARSEMEM_MANUAL is not set +CONFIG_FLATMEM=y +CONFIG_FLAT_NODE_MEM_MAP=y +CONFIG_PAGEFLAGS_EXTENDED=y +CONFIG_SPLIT_PTLOCK_CPUS=4096 +# CONFIG_PHYS_ADDR_T_64BIT is not set +CONFIG_ZONE_DMA_FLAG=0 +CONFIG_VIRT_TO_BUS=y +CONFIG_HAVE_MLOCK=y +CONFIG_HAVE_MLOCKED_PAGE_BIT=y +CONFIG_DEFAULT_MMAP_MIN_ADDR=4096 +CONFIG_ALIGNMENT_TRAP=y +# CONFIG_UACCESS_WITH_MEMCPY is not set + +# +# Boot options +# +CONFIG_ZBOOT_ROM_TEXT=0x0 +CONFIG_ZBOOT_ROM_BSS=0x0 +CONFIG_CMDLINE="" +# CONFIG_XIP_KERNEL is not set +# CONFIG_KEXEC is not set + +# +# CPU Power Management +# +# CONFIG_CPU_IDLE is not set + +# +# Floating point emulation +# + +# +# At least one emulation must be selected +# +CONFIG_FPE_NWFPE=y +# CONFIG_FPE_NWFPE_XP is not set +# CONFIG_FPE_FASTFPE is not set +# CONFIG_VFP is not set + +# +# Userspace binary formats +# +CONFIG_BINFMT_ELF=y +# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set +CONFIG_HAVE_AOUT=y +# CONFIG_BINFMT_AOUT is not set +# CONFIG_BINFMT_MISC is not set + +# +# Power management options +# +CONFIG_PM=y +# CONFIG_PM_DEBUG is not set +CONFIG_PM_SLEEP=y +CONFIG_SUSPEND=y +CONFIG_SUSPEND_FREEZER=y +# CONFIG_APM_EMULATION is not set +CONFIG_ARCH_SUSPEND_POSSIBLE=y +CONFIG_NET=y + +# +# Networking options +# +CONFIG_PACKET=y +# CONFIG_PACKET_MMAP is not set +CONFIG_UNIX=y +CONFIG_XFRM=y +# CONFIG_XFRM_USER is not set +# CONFIG_XFRM_SUB_POLICY is not set +# CONFIG_XFRM_MIGRATE is not set +# CONFIG_XFRM_STATISTICS is not set +CONFIG_NET_KEY=y +# CONFIG_NET_KEY_MIGRATE is not set +CONFIG_INET=y +CONFIG_IP_MULTICAST=y +CONFIG_IP_ADVANCED_ROUTER=y +CONFIG_ASK_IP_FIB_HASH=y +# CONFIG_IP_FIB_TRIE is not set +CONFIG_IP_FIB_HASH=y +# CONFIG_IP_MULTIPLE_TABLES is not set +# CONFIG_IP_ROUTE_MULTIPATH is not set +# CONFIG_IP_ROUTE_VERBOSE is not set +CONFIG_IP_PNP=y +CONFIG_IP_PNP_DHCP=y +CONFIG_IP_PNP_BOOTP=y +# CONFIG_IP_PNP_RARP is not set +CONFIG_NET_IPIP=y +CONFIG_NET_IPGRE=y +CONFIG_NET_IPGRE_BROADCAST=y +CONFIG_IP_MROUTE=y +# CONFIG_IP_PIMSM_V1 is not set +# CONFIG_IP_PIMSM_V2 is not set +# CONFIG_ARPD is not set +# CONFIG_SYN_COOKIES is not set +# CONFIG_INET_AH is not set +# CONFIG_INET_ESP is not set +# CONFIG_INET_IPCOMP is not set +# CONFIG_INET_XFRM_TUNNEL is not set +CONFIG_INET_TUNNEL=y +CONFIG_INET_XFRM_MODE_TRANSPORT=y +CONFIG_INET_XFRM_MODE_TUNNEL=y +CONFIG_INET_XFRM_MODE_BEET=y +# CONFIG_INET_LRO is not set +CONFIG_INET_DIAG=y +CONFIG_INET_TCP_DIAG=y +# CONFIG_TCP_CONG_ADVANCED is not set +CONFIG_TCP_CONG_CUBIC=y +CONFIG_DEFAULT_TCP_CONG="cubic" +# CONFIG_TCP_MD5SIG is not set +# CONFIG_IPV6 is not set +# CONFIG_NETWORK_SECMARK is not set +# CONFIG_NETFILTER is not set +# CONFIG_IP_DCCP is not set +# CONFIG_IP_SCTP is not set +# CONFIG_TIPC is not set +# CONFIG_ATM is not set +# CONFIG_BRIDGE is not set +# CONFIG_NET_DSA is not set +# CONFIG_VLAN_8021Q is not set +# CONFIG_DECNET is not set +# CONFIG_LLC2 is not set +# CONFIG_IPX is not set +# CONFIG_ATALK is not set +# CONFIG_X25 is not set +# CONFIG_LAPB is not set +# CONFIG_ECONET is not set +# CONFIG_WAN_ROUTER is not set +# CONFIG_PHONET is not set +# CONFIG_IEEE802154 is not set +# CONFIG_NET_SCHED is not set +# CONFIG_DCB is not set + +# +# Network testing +# +# CONFIG_NET_PKTGEN is not set +# CONFIG_HAMRADIO is not set +# CONFIG_CAN is not set +# CONFIG_IRDA is not set +CONFIG_BT=m +CONFIG_BT_L2CAP=m +CONFIG_BT_SCO=m +CONFIG_BT_RFCOMM=m +CONFIG_BT_RFCOMM_TTY=y +CONFIG_BT_BNEP=m +CONFIG_BT_BNEP_MC_FILTER=y +CONFIG_BT_BNEP_PROTO_FILTER=y +CONFIG_BT_HIDP=m + +# +# Bluetooth device drivers +# +CONFIG_BT_HCIUART=m +CONFIG_BT_HCIUART_H4=y +CONFIG_BT_HCIUART_BCSP=y +# CONFIG_BT_HCIUART_LL is not set +CONFIG_BT_HCIVHCI=m +# CONFIG_AF_RXRPC is not set +CONFIG_WIRELESS=y +# CONFIG_CFG80211 is not set +CONFIG_WIRELESS_OLD_REGULATORY=y +# CONFIG_WIRELESS_EXT is not set +# CONFIG_LIB80211 is not set + +# +# CFG80211 needs to be enabled for MAC80211 +# +CONFIG_MAC80211_DEFAULT_PS_VALUE=0 +# CONFIG_WIMAX is not set +# CONFIG_RFKILL is not set +# CONFIG_NET_9P is not set + +# +# Device Drivers +# + +# +# Generic Driver Options +# +CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +CONFIG_STANDALONE=y +CONFIG_PREVENT_FIRMWARE_BUILD=y +CONFIG_FW_LOADER=y +CONFIG_FIRMWARE_IN_KERNEL=y +CONFIG_EXTRA_FIRMWARE="" +# CONFIG_DEBUG_DRIVER is not set +# CONFIG_DEBUG_DEVRES is not set +# CONFIG_SYS_HYPERVISOR is not set +# CONFIG_CONNECTOR is not set +CONFIG_MTD=y +# CONFIG_MTD_DEBUG is not set +# CONFIG_MTD_CONCAT is not set +CONFIG_MTD_PARTITIONS=y +CONFIG_MTD_TESTS=m +# CONFIG_MTD_REDBOOT_PARTS is not set +# CONFIG_MTD_CMDLINE_PARTS is not set +# CONFIG_MTD_AFS_PARTS is not set +# CONFIG_MTD_AR7_PARTS is not set + +# +# User Modules And Translation Layers +# +CONFIG_MTD_CHAR=y +CONFIG_MTD_BLKDEVS=y +CONFIG_MTD_BLOCK=y +# CONFIG_FTL is not set +# CONFIG_NFTL is not set +# CONFIG_INFTL is not set +# CONFIG_RFD_FTL is not set +# CONFIG_SSFDC is not set +# CONFIG_MTD_OOPS is not set + +# +# RAM/ROM/Flash chip drivers +# +# CONFIG_MTD_CFI is not set +# CONFIG_MTD_JEDECPROBE is not set +CONFIG_MTD_MAP_BANK_WIDTH_1=y +CONFIG_MTD_MAP_BANK_WIDTH_2=y +CONFIG_MTD_MAP_BANK_WIDTH_4=y +# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set +CONFIG_MTD_CFI_I1=y +CONFIG_MTD_CFI_I2=y +# CONFIG_MTD_CFI_I4 is not set +# CONFIG_MTD_CFI_I8 is not set +# CONFIG_MTD_RAM is not set +# CONFIG_MTD_ROM is not set +# CONFIG_MTD_ABSENT is not set + +# +# Mapping drivers for chip access +# +# CONFIG_MTD_COMPLEX_MAPPINGS is not set +# CONFIG_MTD_PLATRAM is not set + +# +# Self-contained MTD device drivers +# +# CONFIG_MTD_SLRAM is not set +# CONFIG_MTD_PHRAM is not set +# CONFIG_MTD_MTDRAM is not set +# CONFIG_MTD_BLOCK2MTD is not set + +# +# Disk-On-Chip Device Drivers +# +# CONFIG_MTD_DOC2000 is not set +# CONFIG_MTD_DOC2001 is not set +# CONFIG_MTD_DOC2001PLUS is not set +CONFIG_MTD_NAND=y +CONFIG_MTD_NAND_VERIFY_WRITE=y +# CONFIG_MTD_NAND_ECC_SMC is not set +# CONFIG_MTD_NAND_MUSEUM_IDS is not set +# CONFIG_MTD_NAND_GPIO is not set +CONFIG_MTD_NAND_IDS=y +# CONFIG_MTD_NAND_DISKONCHIP is not set +# CONFIG_MTD_NAND_NANDSIM is not set +# CONFIG_MTD_NAND_PLATFORM is not set +CONFIG_MTD_NAND_NOMADIK=y +CONFIG_MTD_ONENAND=y +CONFIG_MTD_ONENAND_VERIFY_WRITE=y +CONFIG_MTD_ONENAND_GENERIC=y +# CONFIG_MTD_ONENAND_OTP is not set +# CONFIG_MTD_ONENAND_2X_PROGRAM is not set +# CONFIG_MTD_ONENAND_SIM is not set + +# +# LPDDR flash memory drivers +# +# CONFIG_MTD_LPDDR is not set + +# +# UBI - Unsorted block images +# +# CONFIG_MTD_UBI is not set +# CONFIG_PARPORT is not set +CONFIG_BLK_DEV=y +# CONFIG_BLK_DEV_COW_COMMON is not set +CONFIG_BLK_DEV_LOOP=y +CONFIG_BLK_DEV_CRYPTOLOOP=y +# CONFIG_BLK_DEV_NBD is not set +CONFIG_BLK_DEV_RAM=y +CONFIG_BLK_DEV_RAM_COUNT=16 +CONFIG_BLK_DEV_RAM_SIZE=4096 +# CONFIG_BLK_DEV_XIP is not set +# CONFIG_CDROM_PKTCDVD is not set +# CONFIG_ATA_OVER_ETH is not set +# CONFIG_MG_DISK is not set +CONFIG_MISC_DEVICES=y +# CONFIG_ICS932S401 is not set +# CONFIG_ENCLOSURE_SERVICES is not set +# CONFIG_ISL29003 is not set +# CONFIG_C2PORT is not set + +# +# EEPROM support +# +# CONFIG_EEPROM_AT24 is not set +# CONFIG_EEPROM_LEGACY is not set +# CONFIG_EEPROM_MAX6875 is not set +# CONFIG_EEPROM_93CX6 is not set +CONFIG_HAVE_IDE=y +# CONFIG_IDE is not set + +# +# SCSI device support +# +# CONFIG_RAID_ATTRS is not set +CONFIG_SCSI=y +CONFIG_SCSI_DMA=y +# CONFIG_SCSI_TGT is not set +# CONFIG_SCSI_NETLINK is not set +CONFIG_SCSI_PROC_FS=y + +# +# SCSI support type (disk, tape, CD-ROM) +# +CONFIG_BLK_DEV_SD=y +# CONFIG_CHR_DEV_ST is not set +# CONFIG_CHR_DEV_OSST is not set +# CONFIG_BLK_DEV_SR is not set +CONFIG_CHR_DEV_SG=y +# CONFIG_CHR_DEV_SCH is not set +CONFIG_SCSI_MULTI_LUN=y +CONFIG_SCSI_CONSTANTS=y +CONFIG_SCSI_LOGGING=y +CONFIG_SCSI_SCAN_ASYNC=y +CONFIG_SCSI_WAIT_SCAN=m + +# +# SCSI Transports +# +# CONFIG_SCSI_SPI_ATTRS is not set +# CONFIG_SCSI_FC_ATTRS is not set +# CONFIG_SCSI_ISCSI_ATTRS is not set +# CONFIG_SCSI_SAS_LIBSAS is not set +# CONFIG_SCSI_SRP_ATTRS is not set +CONFIG_SCSI_LOWLEVEL=y +# CONFIG_ISCSI_TCP is not set +# CONFIG_LIBFC is not set +# CONFIG_LIBFCOE is not set +# CONFIG_SCSI_DEBUG is not set +# CONFIG_SCSI_DH is not set +# CONFIG_SCSI_OSD_INITIATOR is not set +# CONFIG_ATA is not set +# CONFIG_MD is not set +CONFIG_NETDEVICES=y +# CONFIG_DUMMY is not set +# CONFIG_BONDING is not set +# CONFIG_MACVLAN is not set +# CONFIG_EQUALIZER is not set +CONFIG_TUN=y +# CONFIG_VETH is not set +# CONFIG_PHYLIB is not set +CONFIG_NET_ETHERNET=y +CONFIG_MII=y +# CONFIG_AX88796 is not set +CONFIG_SMC91X=y +# CONFIG_DM9000 is not set +# CONFIG_ETHOC is not set +# CONFIG_SMC911X is not set +# CONFIG_SMSC911X is not set +# CONFIG_DNET is not set +# CONFIG_IBM_NEW_EMAC_ZMII is not set +# CONFIG_IBM_NEW_EMAC_RGMII is not set +# CONFIG_IBM_NEW_EMAC_TAH is not set +# CONFIG_IBM_NEW_EMAC_EMAC4 is not set +# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set +# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set +# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set +# CONFIG_B44 is not set +# CONFIG_KS8842 is not set +CONFIG_NETDEV_1000=y +CONFIG_NETDEV_10000=y + +# +# Wireless LAN +# +# CONFIG_WLAN_PRE80211 is not set +# CONFIG_WLAN_80211 is not set + +# +# Enable WiMAX (Networking options) to see the WiMAX drivers +# +# CONFIG_WAN is not set +CONFIG_PPP=m +# CONFIG_PPP_MULTILINK is not set +# CONFIG_PPP_FILTER is not set +CONFIG_PPP_ASYNC=m +CONFIG_PPP_SYNC_TTY=m +CONFIG_PPP_DEFLATE=m +CONFIG_PPP_BSDCOMP=m +CONFIG_PPP_MPPE=m +CONFIG_PPPOE=m +# CONFIG_PPPOL2TP is not set +# CONFIG_SLIP is not set +CONFIG_SLHC=m +CONFIG_NETCONSOLE=m +# CONFIG_NETCONSOLE_DYNAMIC is not set +CONFIG_NETPOLL=y +# CONFIG_NETPOLL_TRAP is not set +CONFIG_NET_POLL_CONTROLLER=y +# CONFIG_ISDN is not set + +# +# Input device support +# +CONFIG_INPUT=y +# CONFIG_INPUT_FF_MEMLESS is not set +# CONFIG_INPUT_POLLDEV is not set + +# +# Userland interfaces +# +# CONFIG_INPUT_MOUSEDEV is not set +# CONFIG_INPUT_JOYDEV is not set +CONFIG_INPUT_EVDEV=y +# CONFIG_INPUT_EVBUG is not set + +# +# Input Device Drivers +# +CONFIG_INPUT_KEYBOARD=y +# CONFIG_KEYBOARD_ATKBD is not set +# CONFIG_KEYBOARD_SUNKBD is not set +# CONFIG_KEYBOARD_LKKBD is not set +# CONFIG_KEYBOARD_XTKBD is not set +# CONFIG_KEYBOARD_NEWTON is not set +# CONFIG_KEYBOARD_STOWAWAY is not set +# CONFIG_KEYBOARD_GPIO is not set +CONFIG_INPUT_MOUSE=y +# CONFIG_MOUSE_PS2 is not set +# CONFIG_MOUSE_SERIAL is not set +# CONFIG_MOUSE_APPLETOUCH is not set +# CONFIG_MOUSE_BCM5974 is not set +# CONFIG_MOUSE_VSXXXAA is not set +# CONFIG_MOUSE_GPIO is not set +# CONFIG_MOUSE_SYNAPTICS_I2C is not set +# CONFIG_INPUT_JOYSTICK is not set +# CONFIG_INPUT_TABLET is not set +# CONFIG_INPUT_TOUCHSCREEN is not set +# CONFIG_INPUT_MISC is not set + +# +# Hardware I/O ports +# +# CONFIG_SERIO is not set +# CONFIG_GAMEPORT is not set + +# +# Character devices +# +CONFIG_VT=y +CONFIG_CONSOLE_TRANSLATIONS=y +CONFIG_VT_CONSOLE=y +CONFIG_HW_CONSOLE=y +# CONFIG_VT_HW_CONSOLE_BINDING is not set +CONFIG_DEVKMEM=y +# CONFIG_SERIAL_NONSTANDARD is not set + +# +# Serial drivers +# +# CONFIG_SERIAL_8250 is not set + +# +# Non-8250 serial port support +# +# CONFIG_SERIAL_AMBA_PL010 is not set +CONFIG_SERIAL_AMBA_PL011=y +CONFIG_SERIAL_AMBA_PL011_CONSOLE=y +CONFIG_SERIAL_CORE=y +CONFIG_SERIAL_CORE_CONSOLE=y +CONFIG_UNIX98_PTYS=y +# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set +# CONFIG_LEGACY_PTYS is not set +# CONFIG_IPMI_HANDLER is not set +# CONFIG_HW_RANDOM is not set +# CONFIG_R3964 is not set +# CONFIG_RAW_DRIVER is not set +# CONFIG_TCG_TPM is not set +CONFIG_I2C=y +CONFIG_I2C_BOARDINFO=y +CONFIG_I2C_CHARDEV=y +CONFIG_I2C_HELPER_AUTO=y +CONFIG_I2C_ALGOBIT=y + +# +# I2C Hardware Bus support +# + +# +# I2C system bus drivers (mostly embedded / system-on-chip) +# +CONFIG_I2C_GPIO=y +# CONFIG_I2C_OCORES is not set +# CONFIG_I2C_SIMTEC is not set + +# +# External I2C/SMBus adapter drivers +# +# CONFIG_I2C_PARPORT_LIGHT is not set +# CONFIG_I2C_TAOS_EVM is not set + +# +# Other I2C/SMBus bus drivers +# +# CONFIG_I2C_PCA_PLATFORM is not set +# CONFIG_I2C_STUB is not set + +# +# Miscellaneous I2C Chip support +# +# CONFIG_DS1682 is not set +# CONFIG_SENSORS_PCF8574 is not set +# CONFIG_PCF8575 is not set +# CONFIG_SENSORS_PCA9539 is not set +# CONFIG_SENSORS_TSL2550 is not set +# CONFIG_I2C_DEBUG_CORE is not set +# CONFIG_I2C_DEBUG_ALGO is not set +# CONFIG_I2C_DEBUG_BUS is not set +# CONFIG_I2C_DEBUG_CHIP is not set +# CONFIG_SPI is not set +CONFIG_ARCH_REQUIRE_GPIOLIB=y +CONFIG_GPIOLIB=y +CONFIG_DEBUG_GPIO=y +# CONFIG_GPIO_SYSFS is not set + +# +# Memory mapped GPIO expanders: +# +# CONFIG_GPIO_PL061 is not set + +# +# I2C GPIO expanders: +# +# CONFIG_GPIO_MAX732X is not set +# CONFIG_GPIO_PCA953X is not set +# CONFIG_GPIO_PCF857X is not set + +# +# PCI GPIO expanders: +# + +# +# SPI GPIO expanders: +# +# CONFIG_W1 is not set +# CONFIG_POWER_SUPPLY is not set +# CONFIG_HWMON is not set +# CONFIG_THERMAL is not set +# CONFIG_THERMAL_HWMON is not set +# CONFIG_WATCHDOG is not set +CONFIG_SSB_POSSIBLE=y + +# +# Sonics Silicon Backplane +# +# CONFIG_SSB is not set + +# +# Multifunction device drivers +# +# CONFIG_MFD_CORE is not set +# CONFIG_MFD_SM501 is not set +# CONFIG_MFD_ASIC3 is not set +# CONFIG_HTC_EGPIO is not set +# CONFIG_HTC_PASIC3 is not set +# CONFIG_TPS65010 is not set +# CONFIG_TWL4030_CORE is not set +# CONFIG_MFD_TMIO is not set +# CONFIG_MFD_T7L66XB is not set +# CONFIG_MFD_TC6387XB is not set +# CONFIG_MFD_TC6393XB is not set +# CONFIG_PMIC_DA903X is not set +# CONFIG_MFD_WM8400 is not set +# CONFIG_MFD_WM8350_I2C is not set +# CONFIG_MFD_PCF50633 is not set +# CONFIG_AB3100_CORE is not set +# CONFIG_MEDIA_SUPPORT is not set + +# +# Graphics support +# +# CONFIG_VGASTATE is not set +# CONFIG_VIDEO_OUTPUT_CONTROL is not set +# CONFIG_FB is not set +# CONFIG_BACKLIGHT_LCD_SUPPORT is not set + +# +# Display device support +# +# CONFIG_DISPLAY_SUPPORT is not set + +# +# Console display driver support +# +# CONFIG_VGA_CONSOLE is not set +CONFIG_DUMMY_CONSOLE=y +# CONFIG_SOUND is not set +CONFIG_HID_SUPPORT=y +CONFIG_HID=y +# CONFIG_HID_DEBUG is not set +# CONFIG_HIDRAW is not set +# CONFIG_HID_PID is not set + +# +# Special HID drivers +# +# CONFIG_HID_APPLE is not set +# CONFIG_HID_WACOM is not set +CONFIG_USB_SUPPORT=y +CONFIG_USB_ARCH_HAS_HCD=y +# CONFIG_USB_ARCH_HAS_OHCI is not set +# CONFIG_USB_ARCH_HAS_EHCI is not set +# CONFIG_USB is not set +# CONFIG_USB_OTG_WHITELIST is not set +# CONFIG_USB_OTG_BLACKLIST_HUB is not set + +# +# Enable Host or Gadget support to see Inventra options +# + +# +# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may +# +# CONFIG_USB_GADGET is not set + +# +# OTG and related infrastructure +# +# CONFIG_MMC is not set +# CONFIG_MEMSTICK is not set +# CONFIG_ACCESSIBILITY is not set +# CONFIG_NEW_LEDS is not set +CONFIG_RTC_LIB=y +CONFIG_RTC_CLASS=y +CONFIG_RTC_HCTOSYS=y +CONFIG_RTC_HCTOSYS_DEVICE="rtc0" +# CONFIG_RTC_DEBUG is not set + +# +# RTC interfaces +# +CONFIG_RTC_INTF_SYSFS=y +CONFIG_RTC_INTF_PROC=y +CONFIG_RTC_INTF_DEV=y +# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set +# CONFIG_RTC_DRV_TEST is not set + +# +# I2C RTC drivers +# +# CONFIG_RTC_DRV_DS1307 is not set +# CONFIG_RTC_DRV_DS1374 is not set +# CONFIG_RTC_DRV_DS1672 is not set +# CONFIG_RTC_DRV_MAX6900 is not set +# CONFIG_RTC_DRV_RS5C372 is not set +# CONFIG_RTC_DRV_ISL1208 is not set +# CONFIG_RTC_DRV_X1205 is not set +# CONFIG_RTC_DRV_PCF8563 is not set +# CONFIG_RTC_DRV_PCF8583 is not set +# CONFIG_RTC_DRV_M41T80 is not set +# CONFIG_RTC_DRV_S35390A is not set +# CONFIG_RTC_DRV_FM3130 is not set +# CONFIG_RTC_DRV_RX8581 is not set +# CONFIG_RTC_DRV_RX8025 is not set + +# +# SPI RTC drivers +# + +# +# Platform RTC drivers +# +# CONFIG_RTC_DRV_CMOS is not set +# CONFIG_RTC_DRV_DS1286 is not set +# CONFIG_RTC_DRV_DS1511 is not set +# CONFIG_RTC_DRV_DS1553 is not set +# CONFIG_RTC_DRV_DS1742 is not set +# CONFIG_RTC_DRV_STK17TA8 is not set +# CONFIG_RTC_DRV_M48T86 is not set +# CONFIG_RTC_DRV_M48T35 is not set +# CONFIG_RTC_DRV_M48T59 is not set +# CONFIG_RTC_DRV_BQ4802 is not set +# CONFIG_RTC_DRV_V3020 is not set + +# +# on-CPU RTC drivers +# +# CONFIG_RTC_DRV_PL030 is not set +# CONFIG_RTC_DRV_PL031 is not set +# CONFIG_DMADEVICES is not set +# CONFIG_AUXDISPLAY is not set +# CONFIG_REGULATOR is not set +# CONFIG_UIO is not set +# CONFIG_STAGING is not set + +# +# File systems +# +CONFIG_EXT2_FS=y +# CONFIG_EXT2_FS_XATTR is not set +# CONFIG_EXT2_FS_XIP is not set +CONFIG_EXT3_FS=y +# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set +CONFIG_EXT3_FS_XATTR=y +# CONFIG_EXT3_FS_POSIX_ACL is not set +# CONFIG_EXT3_FS_SECURITY is not set +# CONFIG_EXT4_FS is not set +CONFIG_JBD=y +CONFIG_FS_MBCACHE=y +# CONFIG_REISERFS_FS is not set +# CONFIG_JFS_FS is not set +CONFIG_FS_POSIX_ACL=y +# CONFIG_XFS_FS is not set +# CONFIG_GFS2_FS is not set +# CONFIG_OCFS2_FS is not set +# CONFIG_BTRFS_FS is not set +CONFIG_FILE_LOCKING=y +CONFIG_FSNOTIFY=y +CONFIG_DNOTIFY=y +CONFIG_INOTIFY=y +CONFIG_INOTIFY_USER=y +# CONFIG_QUOTA is not set +# CONFIG_AUTOFS_FS is not set +# CONFIG_AUTOFS4_FS is not set +CONFIG_FUSE_FS=y +# CONFIG_CUSE is not set + +# +# Caches +# +# CONFIG_FSCACHE is not set + +# +# CD-ROM/DVD Filesystems +# +# CONFIG_ISO9660_FS is not set +# CONFIG_UDF_FS is not set + +# +# DOS/FAT/NT Filesystems +# +CONFIG_FAT_FS=y +CONFIG_MSDOS_FS=y +CONFIG_VFAT_FS=y +CONFIG_FAT_DEFAULT_CODEPAGE=437 +CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" +# CONFIG_NTFS_FS is not set + +# +# Pseudo filesystems +# +CONFIG_PROC_FS=y +CONFIG_PROC_SYSCTL=y +CONFIG_PROC_PAGE_MONITOR=y +CONFIG_SYSFS=y +CONFIG_TMPFS=y +# CONFIG_TMPFS_POSIX_ACL is not set +# CONFIG_HUGETLB_PAGE is not set +# CONFIG_CONFIGFS_FS is not set +CONFIG_MISC_FILESYSTEMS=y +# CONFIG_ADFS_FS is not set +# CONFIG_AFFS_FS is not set +# CONFIG_HFS_FS is not set +# CONFIG_HFSPLUS_FS is not set +# CONFIG_BEFS_FS is not set +# CONFIG_BFS_FS is not set +# CONFIG_EFS_FS is not set +CONFIG_JFFS2_FS=y +CONFIG_JFFS2_FS_DEBUG=0 +CONFIG_JFFS2_FS_WRITEBUFFER=y +# CONFIG_JFFS2_FS_WBUF_VERIFY is not set +# CONFIG_JFFS2_SUMMARY is not set +# CONFIG_JFFS2_FS_XATTR is not set +# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set +CONFIG_JFFS2_ZLIB=y +# CONFIG_JFFS2_LZO is not set +CONFIG_JFFS2_RTIME=y +# CONFIG_JFFS2_RUBIN is not set +# CONFIG_CRAMFS is not set +# CONFIG_SQUASHFS is not set +# CONFIG_VXFS_FS is not set +# CONFIG_MINIX_FS is not set +# CONFIG_OMFS_FS is not set +# CONFIG_HPFS_FS is not set +# CONFIG_QNX4FS_FS is not set +# CONFIG_ROMFS_FS is not set +# CONFIG_SYSV_FS is not set +# CONFIG_UFS_FS is not set +# CONFIG_NILFS2_FS is not set +CONFIG_NETWORK_FILESYSTEMS=y +CONFIG_NFS_FS=y +CONFIG_NFS_V3=y +CONFIG_NFS_V3_ACL=y +# CONFIG_NFS_V4 is not set +CONFIG_ROOT_NFS=y +# CONFIG_NFSD is not set +CONFIG_LOCKD=y +CONFIG_LOCKD_V4=y +CONFIG_NFS_ACL_SUPPORT=y +CONFIG_NFS_COMMON=y +CONFIG_SUNRPC=y +# CONFIG_RPCSEC_GSS_KRB5 is not set +# CONFIG_RPCSEC_GSS_SPKM3 is not set +CONFIG_SMB_FS=m +# CONFIG_SMB_NLS_DEFAULT is not set +CONFIG_CIFS=m +# CONFIG_CIFS_STATS is not set +CONFIG_CIFS_WEAK_PW_HASH=y +# CONFIG_CIFS_XATTR is not set +# CONFIG_CIFS_DEBUG2 is not set +# CONFIG_CIFS_EXPERIMENTAL is not set +# CONFIG_NCP_FS is not set +# CONFIG_CODA_FS is not set +# CONFIG_AFS_FS is not set + +# +# Partition Types +# +# CONFIG_PARTITION_ADVANCED is not set +CONFIG_MSDOS_PARTITION=y +CONFIG_NLS=y +CONFIG_NLS_DEFAULT="iso8859-1" +CONFIG_NLS_CODEPAGE_437=y +# CONFIG_NLS_CODEPAGE_737 is not set +# CONFIG_NLS_CODEPAGE_775 is not set +# CONFIG_NLS_CODEPAGE_850 is not set +# CONFIG_NLS_CODEPAGE_852 is not set +# CONFIG_NLS_CODEPAGE_855 is not set +# CONFIG_NLS_CODEPAGE_857 is not set +# CONFIG_NLS_CODEPAGE_860 is not set +# CONFIG_NLS_CODEPAGE_861 is not set +# CONFIG_NLS_CODEPAGE_862 is not set +# CONFIG_NLS_CODEPAGE_863 is not set +# CONFIG_NLS_CODEPAGE_864 is not set +# CONFIG_NLS_CODEPAGE_865 is not set +# CONFIG_NLS_CODEPAGE_866 is not set +# CONFIG_NLS_CODEPAGE_869 is not set +# CONFIG_NLS_CODEPAGE_936 is not set +# CONFIG_NLS_CODEPAGE_950 is not set +# CONFIG_NLS_CODEPAGE_932 is not set +# CONFIG_NLS_CODEPAGE_949 is not set +# CONFIG_NLS_CODEPAGE_874 is not set +# CONFIG_NLS_ISO8859_8 is not set +# CONFIG_NLS_CODEPAGE_1250 is not set +# CONFIG_NLS_CODEPAGE_1251 is not set +CONFIG_NLS_ASCII=y +CONFIG_NLS_ISO8859_1=y +# CONFIG_NLS_ISO8859_2 is not set +# CONFIG_NLS_ISO8859_3 is not set +# CONFIG_NLS_ISO8859_4 is not set +# CONFIG_NLS_ISO8859_5 is not set +# CONFIG_NLS_ISO8859_6 is not set +# CONFIG_NLS_ISO8859_7 is not set +# CONFIG_NLS_ISO8859_9 is not set +# CONFIG_NLS_ISO8859_13 is not set +# CONFIG_NLS_ISO8859_14 is not set +CONFIG_NLS_ISO8859_15=y +# CONFIG_NLS_KOI8_R is not set +# CONFIG_NLS_KOI8_U is not set +# CONFIG_NLS_UTF8 is not set +# CONFIG_DLM is not set + +# +# Kernel hacking +# +# CONFIG_PRINTK_TIME is not set +CONFIG_ENABLE_WARN_DEPRECATED=y +# CONFIG_ENABLE_MUST_CHECK is not set +CONFIG_FRAME_WARN=1024 +# CONFIG_MAGIC_SYSRQ is not set +# CONFIG_UNUSED_SYMBOLS is not set +# CONFIG_DEBUG_FS is not set +# CONFIG_HEADERS_CHECK is not set +CONFIG_DEBUG_KERNEL=y +# CONFIG_DEBUG_SHIRQ is not set +CONFIG_DETECT_SOFTLOCKUP=y +# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set +CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0 +CONFIG_DETECT_HUNG_TASK=y +# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set +CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0 +# CONFIG_SCHED_DEBUG is not set +# CONFIG_SCHEDSTATS is not set +# CONFIG_TIMER_STATS is not set +# CONFIG_DEBUG_OBJECTS is not set +# CONFIG_DEBUG_SLAB is not set +# CONFIG_DEBUG_KMEMLEAK is not set +# CONFIG_DEBUG_PREEMPT is not set +# CONFIG_DEBUG_RT_MUTEXES is not set +# CONFIG_RT_MUTEX_TESTER is not set +# CONFIG_DEBUG_SPINLOCK is not set +# CONFIG_DEBUG_MUTEXES is not set +# CONFIG_DEBUG_LOCK_ALLOC is not set +# CONFIG_PROVE_LOCKING is not set +# CONFIG_LOCK_STAT is not set +# CONFIG_DEBUG_SPINLOCK_SLEEP is not set +# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set +# CONFIG_DEBUG_KOBJECT is not set +# CONFIG_DEBUG_BUGVERBOSE is not set +CONFIG_DEBUG_INFO=y +# CONFIG_DEBUG_VM is not set +# CONFIG_DEBUG_WRITECOUNT is not set +# CONFIG_DEBUG_MEMORY_INIT is not set +# CONFIG_DEBUG_LIST is not set +# CONFIG_DEBUG_SG is not set +# CONFIG_DEBUG_NOTIFIERS is not set +# CONFIG_BOOT_PRINTK_DELAY is not set +# CONFIG_RCU_TORTURE_TEST is not set +# CONFIG_RCU_CPU_STALL_DETECTOR is not set +# CONFIG_BACKTRACE_SELF_TEST is not set +# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set +# CONFIG_FAULT_INJECTION is not set +# CONFIG_LATENCYTOP is not set +# CONFIG_SYSCTL_SYSCALL_CHECK is not set +# CONFIG_PAGE_POISONING is not set +CONFIG_HAVE_FUNCTION_TRACER=y +CONFIG_TRACING_SUPPORT=y +CONFIG_FTRACE=y +# CONFIG_FUNCTION_TRACER is not set +# CONFIG_IRQSOFF_TRACER is not set +# CONFIG_PREEMPT_TRACER is not set +# CONFIG_SCHED_TRACER is not set +# CONFIG_ENABLE_DEFAULT_TRACERS is not set +# CONFIG_BOOT_TRACER is not set +CONFIG_BRANCH_PROFILE_NONE=y +# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set +# CONFIG_PROFILE_ALL_BRANCHES is not set +# CONFIG_STACK_TRACER is not set +# CONFIG_KMEMTRACE is not set +# CONFIG_WORKQUEUE_TRACER is not set +# CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_SAMPLES is not set +CONFIG_HAVE_ARCH_KGDB=y +# CONFIG_KGDB is not set +CONFIG_ARM_UNWIND=y +# CONFIG_DEBUG_USER is not set +# CONFIG_DEBUG_ERRORS is not set +# CONFIG_DEBUG_STACK_USAGE is not set +# CONFIG_DEBUG_LL is not set + +# +# Security options +# +# CONFIG_KEYS is not set +# CONFIG_SECURITY is not set +# CONFIG_SECURITYFS is not set +# CONFIG_SECURITY_FILE_CAPABILITIES is not set +CONFIG_CRYPTO=y + +# +# Crypto core or helper +# +# CONFIG_CRYPTO_FIPS is not set +CONFIG_CRYPTO_ALGAPI=y +CONFIG_CRYPTO_ALGAPI2=y +CONFIG_CRYPTO_AEAD2=y +CONFIG_CRYPTO_BLKCIPHER=y +CONFIG_CRYPTO_BLKCIPHER2=y +CONFIG_CRYPTO_HASH=y +CONFIG_CRYPTO_HASH2=y +CONFIG_CRYPTO_RNG2=y +CONFIG_CRYPTO_PCOMP=y +CONFIG_CRYPTO_MANAGER=y +CONFIG_CRYPTO_MANAGER2=y +# CONFIG_CRYPTO_GF128MUL is not set +# CONFIG_CRYPTO_NULL is not set +CONFIG_CRYPTO_WORKQUEUE=y +# CONFIG_CRYPTO_CRYPTD is not set +# CONFIG_CRYPTO_AUTHENC is not set +# CONFIG_CRYPTO_TEST is not set + +# +# Authenticated Encryption with Associated Data +# +# CONFIG_CRYPTO_CCM is not set +# CONFIG_CRYPTO_GCM is not set +# CONFIG_CRYPTO_SEQIV is not set + +# +# Block modes +# +CONFIG_CRYPTO_CBC=y +# CONFIG_CRYPTO_CTR is not set +# CONFIG_CRYPTO_CTS is not set +CONFIG_CRYPTO_ECB=m +# CONFIG_CRYPTO_LRW is not set +# CONFIG_CRYPTO_PCBC is not set +# CONFIG_CRYPTO_XTS is not set + +# +# Hash modes +# +# CONFIG_CRYPTO_HMAC is not set +# CONFIG_CRYPTO_XCBC is not set + +# +# Digest +# +# CONFIG_CRYPTO_CRC32C is not set +# CONFIG_CRYPTO_MD4 is not set +CONFIG_CRYPTO_MD5=y +# CONFIG_CRYPTO_MICHAEL_MIC is not set +# CONFIG_CRYPTO_RMD128 is not set +# CONFIG_CRYPTO_RMD160 is not set +# CONFIG_CRYPTO_RMD256 is not set +# CONFIG_CRYPTO_RMD320 is not set +CONFIG_CRYPTO_SHA1=y +# CONFIG_CRYPTO_SHA256 is not set +# CONFIG_CRYPTO_SHA512 is not set +# CONFIG_CRYPTO_TGR192 is not set +# CONFIG_CRYPTO_WP512 is not set + +# +# Ciphers +# +# CONFIG_CRYPTO_AES is not set +# CONFIG_CRYPTO_ANUBIS is not set +CONFIG_CRYPTO_ARC4=m +# CONFIG_CRYPTO_BLOWFISH is not set +# CONFIG_CRYPTO_CAMELLIA is not set +# CONFIG_CRYPTO_CAST5 is not set +# CONFIG_CRYPTO_CAST6 is not set +CONFIG_CRYPTO_DES=y +# CONFIG_CRYPTO_FCRYPT is not set +# CONFIG_CRYPTO_KHAZAD is not set +# CONFIG_CRYPTO_SALSA20 is not set +# CONFIG_CRYPTO_SEED is not set +# CONFIG_CRYPTO_SERPENT is not set +# CONFIG_CRYPTO_TEA is not set +# CONFIG_CRYPTO_TWOFISH is not set + +# +# Compression +# +# CONFIG_CRYPTO_DEFLATE is not set +# CONFIG_CRYPTO_ZLIB is not set +# CONFIG_CRYPTO_LZO is not set + +# +# Random Number Generation +# +# CONFIG_CRYPTO_ANSI_CPRNG is not set +CONFIG_CRYPTO_HW=y +# CONFIG_BINARY_PRINTF is not set + +# +# Library routines +# +CONFIG_BITREVERSE=y +CONFIG_GENERIC_FIND_LAST_BIT=y +CONFIG_CRC_CCITT=m +# CONFIG_CRC16 is not set +# CONFIG_CRC_T10DIF is not set +# CONFIG_CRC_ITU_T is not set +CONFIG_CRC32=y +# CONFIG_CRC7 is not set +# CONFIG_LIBCRC32C is not set +CONFIG_ZLIB_INFLATE=y +CONFIG_ZLIB_DEFLATE=y +CONFIG_DECOMPRESS_GZIP=y +CONFIG_HAS_IOMEM=y +CONFIG_HAS_IOPORT=y +CONFIG_HAS_DMA=y +CONFIG_NLATTR=y -- cgit v1.2.3 From 7eeff4814224646c896303ba2c2b7ac3c4240cd2 Mon Sep 17 00:00:00 2001 From: Matt Reimer Date: Mon, 15 Jun 2009 13:21:25 -0700 Subject: pxamci: correct DMA flow control The DMA flow control in pxamci_setup_data() is backwards; fix it. Signed-off-by: Matt Reimer Acked-by: Robert Jarzmik Signed-off-by: Eric Miao --- drivers/mmc/host/pxamci.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/mmc/host/pxamci.c b/drivers/mmc/host/pxamci.c index d7d7109ef47..e55ac792d68 100644 --- a/drivers/mmc/host/pxamci.c +++ b/drivers/mmc/host/pxamci.c @@ -168,12 +168,12 @@ static void pxamci_setup_data(struct pxamci_host *host, struct mmc_data *data) if (data->flags & MMC_DATA_READ) { host->dma_dir = DMA_FROM_DEVICE; - dcmd = DCMD_INCTRGADDR | DCMD_FLOWTRG; + dcmd = DCMD_INCTRGADDR | DCMD_FLOWSRC; DRCMR(host->dma_drcmrtx) = 0; DRCMR(host->dma_drcmrrx) = host->dma | DRCMR_MAPVLD; } else { host->dma_dir = DMA_TO_DEVICE; - dcmd = DCMD_INCSRCADDR | DCMD_FLOWSRC; + dcmd = DCMD_INCSRCADDR | DCMD_FLOWTRG; DRCMR(host->dma_drcmrrx) = 0; DRCMR(host->dma_drcmrtx) = host->dma | DRCMR_MAPVLD; } -- cgit v1.2.3 From 5c68b09900f04c3de55af43155435b9392f03844 Mon Sep 17 00:00:00 2001 From: Daniel Mack Date: Mon, 22 Jun 2009 21:01:58 +0200 Subject: [ARM] pxa: correct I2CPWR clock for pxa3xx In commit f23d4911319fd, the pwr-i2c device name changed due to the newly introduced device table. This patch fixes the clock so the driver's probe will succeed again. Signed-off-by: Daniel Mack Acked-by: Russell King Signed-off-by: Eric Miao --- arch/arm/mach-pxa/pxa3xx.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm/mach-pxa/pxa3xx.c b/arch/arm/mach-pxa/pxa3xx.c index 6f678d93bf4..09b7b1a10ca 100644 --- a/arch/arm/mach-pxa/pxa3xx.c +++ b/arch/arm/mach-pxa/pxa3xx.c @@ -250,7 +250,7 @@ static DEFINE_PXA3_CKEN(pxa3xx_mmc2, MMC2, 19500000, 0); static struct clk_lookup pxa3xx_clkregs[] = { INIT_CLKREG(&clk_pxa3xx_pout, NULL, "CLK_POUT"), /* Power I2C clock is always on */ - INIT_CLKREG(&clk_dummy, "pxa2xx-i2c.1", NULL), + INIT_CLKREG(&clk_dummy, "pxa3xx-pwri2c.1", NULL), INIT_CLKREG(&clk_pxa3xx_lcd, "pxa2xx-fb", NULL), INIT_CLKREG(&clk_pxa3xx_camera, NULL, "CAMCLK"), INIT_CLKREG(&clk_pxa3xx_ac97, NULL, "AC97CLK"), -- cgit v1.2.3 From 4aa78264d14bb0e87897acb90941c368248e20ce Mon Sep 17 00:00:00 2001 From: Daniel Mack Date: Fri, 19 Jun 2009 22:56:09 +0200 Subject: [ARM] pxa: use kzalloc() in pxa_init_gpio_chip() As slab is available early now, use kzalloc() rather than alloc_bootmem_low() in pxa_init_gpio_chip(). This removes the following boot time warning: <4>------------[ cut here ]------------ <4>WARNING: at mm/bootmem.c:535 alloc_arch_preferred_bootmem+0x2c/0x54() Modules linked in: [] (unwind_backtrace+0x0/0xdc) from [] (warn_slowpath_common+0x4c/0x80) [] (warn_slowpath_common+0x4c/0x80) from [] (alloc_arch_preferred_bootmem+0x2c/0x54) [] (alloc_arch_preferred_bootmem+0x2c/0x54) from [] (___alloc_bootmem_nopanic+0x34/0xd0) [] (___alloc_bootmem_nopanic+0x34/0xd0) from [] (___alloc_bootmem+0xc/0x34) [] (___alloc_bootmem+0xc/0x34) from [] (pxa_init_gpio+0x48/0x228) [] (pxa_init_gpio+0x48/0x228) from [] (init_IRQ+0x34/0x44) [] (init_IRQ+0x34/0x44) from [] (start_kernel+0x144/0x264) [] (start_kernel+0x144/0x264) from [] (0xa0008034) <4>---[ end trace 1b75b31a2719ed1c ]--- Signed-off-by: Daniel Mack Signed-off-by: Eric Miao --- arch/arm/plat-pxa/gpio.c | 9 ++------- 1 file changed, 2 insertions(+), 7 deletions(-) diff --git a/arch/arm/plat-pxa/gpio.c b/arch/arm/plat-pxa/gpio.c index abc79d44aca..98548c6903a 100644 --- a/arch/arm/plat-pxa/gpio.c +++ b/arch/arm/plat-pxa/gpio.c @@ -16,7 +16,7 @@ #include #include #include -#include +#include #include @@ -112,17 +112,12 @@ static int __init pxa_init_gpio_chip(int gpio_end) int i, gpio, nbanks = gpio_to_bank(gpio_end) + 1; struct pxa_gpio_chip *chips; - /* this is early, we have to use bootmem allocator, and we really - * want this to be allocated dynamically for different 'gpio_end' - */ - chips = alloc_bootmem_low(nbanks * sizeof(struct pxa_gpio_chip)); + chips = kzalloc(nbanks * sizeof(struct pxa_gpio_chip), GFP_KERNEL); if (chips == NULL) { pr_err("%s: failed to allocate GPIO chips\n", __func__); return -ENOMEM; } - memset(chips, 0, nbanks * sizeof(struct pxa_gpio_chip)); - for (i = 0, gpio = 0; i < nbanks; i++, gpio += 32) { struct gpio_chip *c = &chips[i].chip; -- cgit v1.2.3 From 82e8b54229fb121946151b82e8ff3c3284bd723f Mon Sep 17 00:00:00 2001 From: Marc Zyngier Date: Fri, 19 Jun 2009 10:50:54 +0200 Subject: backlight: fix pwm_bl.c to notify platform code when suspending When suspending, pwm-bl sets duty cycle to 0, and shuts down the pwm device. This patch ensure that the platform code is called before that (through the notify callback_, leaving a chance for the platform code to configure GPIOs (shutting off the backlight, for example), much like it is done during normal operations. Signed-off-by: Marc Zyngier Signed-off-by: Eric Miao --- drivers/video/backlight/pwm_bl.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/video/backlight/pwm_bl.c b/drivers/video/backlight/pwm_bl.c index e641584e212..88716626744 100644 --- a/drivers/video/backlight/pwm_bl.c +++ b/drivers/video/backlight/pwm_bl.c @@ -145,6 +145,8 @@ static int pwm_backlight_suspend(struct platform_device *pdev, struct backlight_device *bl = platform_get_drvdata(pdev); struct pwm_bl_data *pb = dev_get_drvdata(&bl->dev); + if (pb->notify) + pb->notify(0); pwm_config(pb->pwm, 0, pb->period); pwm_disable(pb->pwm); return 0; -- cgit v1.2.3 From 22fe84394f405c673b362d23dcc2d5d095ab5f6c Mon Sep 17 00:00:00 2001 From: Mike Rapoport Date: Mon, 6 Jul 2009 08:56:51 +0300 Subject: [ARM] pxa: fix ULPI_{DIR,NXT,STP} MFP defines Attepmpt to configure ULPI pins gives the following compile error: CC arch/arm/mach-pxa/cm-x300.o arch/arm/mach-pxa/cm-x300.c:155: error: 'MFP_MFP_AF0' undeclared here (not in a function) arch/arm/mach-pxa/cm-x300.c:155: error: 'MFP_MFP_DS01X' undeclared here (not in a function) make[2]: *** [arch/arm/mach-pxa/cm-x300.o] Error 1 make[1]: *** [arch/arm/mach-pxa] Error 2 make: *** [sub-make] Error 2 Fix it. Signed-off-by: Mike Rapoport Signed-off-by: Eric Miao --- arch/arm/mach-pxa/include/mach/mfp-pxa300.h | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/arch/arm/mach-pxa/include/mach/mfp-pxa300.h b/arch/arm/mach-pxa/include/mach/mfp-pxa300.h index ae8441192ef..7139e0dc26d 100644 --- a/arch/arm/mach-pxa/include/mach/mfp-pxa300.h +++ b/arch/arm/mach-pxa/include/mach/mfp-pxa300.h @@ -567,9 +567,9 @@ #define GPIO37_ULPI_DATA_OUT_7 MFP_CFG(GPIO37, AF3) #define GPIO33_ULPI_OTG_INTR MFP_CFG(GPIO33, AF1) -#define ULPI_DIR MFP_CFG_DRV(ULPI_DIR, MFP_AF0, MFP_DS01X) -#define ULPI_NXT MFP_CFG_DRV(ULPI_NXT, MFP_AF0, MFP_DS01X) -#define ULPI_STP MFP_CFG_DRV(ULPI_STP, MFP_AF0, MFP_DS01X) +#define ULPI_DIR MFP_CFG_DRV(ULPI_DIR, AF0, DS01X) +#define ULPI_NXT MFP_CFG_DRV(ULPI_NXT, AF0, DS01X) +#define ULPI_STP MFP_CFG_DRV(ULPI_STP, AF0, DS01X) #endif /* CONFIG_CPU_PXA310 */ #endif /* __ASM_ARCH_MFP_PXA300_H */ -- cgit v1.2.3 From cc4ac2e7fb90dfbbbd5a42df0879733f787e4690 Mon Sep 17 00:00:00 2001 From: Yevgeny Petrilin Date: Mon, 6 Jul 2009 16:10:03 -0700 Subject: mlx4_core: Handle multi-physical function devices MT26468 (PCI ID 0x6764) devices can expose multiple physical functions. The current driver only handles the primary physical function. For other functions, the QUERY_FW firmware command will fail with the CMD_STAT_MULTI_FUNC_REQ error code. Don't try to drive such devices, but print a message saying the driver is skipping those devices rather than just "QUERY_FW command failed." Signed-off-by: Yevgeny Petrilin [ Rather than keeping unsupported devices bound to the driver, simply print a more informative error message and exit - Roland ] Signed-off-by: Roland Dreier --- drivers/net/mlx4/cmd.c | 5 ++++- drivers/net/mlx4/main.c | 5 ++++- 2 files changed, 8 insertions(+), 2 deletions(-) diff --git a/drivers/net/mlx4/cmd.c b/drivers/net/mlx4/cmd.c index 2845a0560b8..65ec77dc31f 100644 --- a/drivers/net/mlx4/cmd.c +++ b/drivers/net/mlx4/cmd.c @@ -80,7 +80,9 @@ enum { /* Bad management packet (silently discarded): */ CMD_STAT_BAD_PKT = 0x30, /* More outstanding CQEs in CQ than new CQ size: */ - CMD_STAT_BAD_SIZE = 0x40 + CMD_STAT_BAD_SIZE = 0x40, + /* Multi Function device support required: */ + CMD_STAT_MULTI_FUNC_REQ = 0x50, }; enum { @@ -128,6 +130,7 @@ static int mlx4_status_to_errno(u8 status) [CMD_STAT_LAM_NOT_PRE] = -EAGAIN, [CMD_STAT_BAD_PKT] = -EINVAL, [CMD_STAT_BAD_SIZE] = -ENOMEM, + [CMD_STAT_MULTI_FUNC_REQ] = -EACCES, }; if (status >= ARRAY_SIZE(trans_table) || diff --git a/drivers/net/mlx4/main.c b/drivers/net/mlx4/main.c index 018348c0119..b820658fa07 100644 --- a/drivers/net/mlx4/main.c +++ b/drivers/net/mlx4/main.c @@ -729,7 +729,10 @@ static int mlx4_init_hca(struct mlx4_dev *dev) err = mlx4_QUERY_FW(dev); if (err) { - mlx4_err(dev, "QUERY_FW command failed, aborting.\n"); + if (err == -EACCES) + mlx4_info(dev, "non-primary physical function, skipping.\n"); + else + mlx4_err(dev, "QUERY_FW command failed, aborting.\n"); return err; } -- cgit v1.2.3 From 92bd3bbfbe644ea0860cfe84cf175fffa5246423 Mon Sep 17 00:00:00 2001 From: Yevgeny Petrilin Date: Mon, 6 Jul 2009 16:10:40 -0700 Subject: mlx4_core: Add new ConnectX EN PCI ID 0x6764 Signed-off-by: Yevgeny Petrilin Signed-off-by: Roland Dreier --- drivers/net/mlx4/main.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/net/mlx4/main.c b/drivers/net/mlx4/main.c index b820658fa07..dac621b1e9f 100644 --- a/drivers/net/mlx4/main.c +++ b/drivers/net/mlx4/main.c @@ -1288,6 +1288,7 @@ static struct pci_device_id mlx4_pci_table[] = { { PCI_VDEVICE(MELLANOX, 0x6750) }, /* MT25408 "Hermon" EN 10GigE PCIe gen2 */ { PCI_VDEVICE(MELLANOX, 0x6372) }, /* MT25458 ConnectX EN 10GBASE-T 10GigE */ { PCI_VDEVICE(MELLANOX, 0x675a) }, /* MT25458 ConnectX EN 10GBASE-T+Gen2 10GigE */ + { PCI_VDEVICE(MELLANOX, 0x6764) }, /* MT26468 ConnectX EN 10GigE PCIe gen2*/ { 0, } }; -- cgit v1.2.3 From e2ce0e718ee72e5915d35a6f4af40fa249cd626d Mon Sep 17 00:00:00 2001 From: Simon Kagstrom Date: Tue, 30 Jun 2009 21:42:00 -0400 Subject: [ARM] Kirkwood: Correct header define Correct define typo (. -> ,) Signed-off-by: Simon Kagstrom Signed-off-by: Nicolas Pitre --- arch/arm/mach-kirkwood/mpp.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm/mach-kirkwood/mpp.h b/arch/arm/mach-kirkwood/mpp.h index e021a80c2ca..bc74278ed31 100644 --- a/arch/arm/mach-kirkwood/mpp.h +++ b/arch/arm/mach-kirkwood/mpp.h @@ -289,7 +289,7 @@ #define MPP48_GPIO MPP( 48, 0x0, 1, 1, 0, 0, 0, 1 ) #define MPP48_TSMP12 MPP( 48, 0x1, 1, 1, 0, 0, 0, 1 ) -#define MPP48_TDM_DTX MPP( 48. 0x2, 0, 1, 0, 0, 0, 1 ) +#define MPP48_TDM_DTX MPP( 48, 0x2, 0, 1, 0, 0, 0, 1 ) #define MPP49_GPIO MPP( 49, 0x0, 1, 1, 0, 0, 0, 1 ) #define MPP49_TSMP9 MPP( 49, 0x1, 1, 1, 0, 0, 0, 1 ) -- cgit v1.2.3 From bf2a76b317c6ccc6f7b6b1dc09664c5b6a155c61 Mon Sep 17 00:00:00 2001 From: Catalin Marinas Date: Tue, 7 Jul 2009 10:32:55 +0100 Subject: kmemleak: Renice the scanning thread to +10 This is a long-running thread but not high-priority. So it makes sense to renice it to +10. Signed-off-by: Catalin Marinas --- mm/kmemleak.c | 1 + 1 file changed, 1 insertion(+) diff --git a/mm/kmemleak.c b/mm/kmemleak.c index e766e1da09d..60065531f60 100644 --- a/mm/kmemleak.c +++ b/mm/kmemleak.c @@ -1039,6 +1039,7 @@ static int kmemleak_scan_thread(void *arg) static int first_run = 1; pr_info("Automatic memory scanning thread started\n"); + set_user_nice(current, 10); /* * Wait before the first scan to allow the system to fully initialize. -- cgit v1.2.3 From 4b8a96744c0c27ab94fb4e8155d4384c3b399e27 Mon Sep 17 00:00:00 2001 From: Catalin Marinas Date: Tue, 7 Jul 2009 10:32:56 +0100 Subject: kmemleak: Add more cond_resched() calls in the scanning thread Following recent fix to no longer reschedule in the scan_block() function, the system may become unresponsive with !PREEMPT. This patch re-adds the cond_resched() call to scan_block() but conditioned by the allow_resched parameter. Signed-off-by: Catalin Marinas Cc: Ingo Molnar --- mm/kmemleak.c | 19 +++++++++++-------- 1 file changed, 11 insertions(+), 8 deletions(-) diff --git a/mm/kmemleak.c b/mm/kmemleak.c index 60065531f60..93f14818e90 100644 --- a/mm/kmemleak.c +++ b/mm/kmemleak.c @@ -807,7 +807,7 @@ static int scan_should_stop(void) * found to the gray list. */ static void scan_block(void *_start, void *_end, - struct kmemleak_object *scanned) + struct kmemleak_object *scanned, int allow_resched) { unsigned long *ptr; unsigned long *start = PTR_ALIGN(_start, BYTES_PER_POINTER); @@ -818,6 +818,8 @@ static void scan_block(void *_start, void *_end, unsigned long pointer = *ptr; struct kmemleak_object *object; + if (allow_resched) + cond_resched(); if (scan_should_stop()) break; @@ -881,12 +883,12 @@ static void scan_object(struct kmemleak_object *object) goto out; if (hlist_empty(&object->area_list)) scan_block((void *)object->pointer, - (void *)(object->pointer + object->size), object); + (void *)(object->pointer + object->size), object, 0); else hlist_for_each_entry(area, elem, &object->area_list, node) scan_block((void *)(object->pointer + area->offset), (void *)(object->pointer + area->offset - + area->length), object); + + area->length), object, 0); out: spin_unlock_irqrestore(&object->lock, flags); } @@ -931,14 +933,14 @@ static void kmemleak_scan(void) rcu_read_unlock(); /* data/bss scanning */ - scan_block(_sdata, _edata, NULL); - scan_block(__bss_start, __bss_stop, NULL); + scan_block(_sdata, _edata, NULL, 1); + scan_block(__bss_start, __bss_stop, NULL, 1); #ifdef CONFIG_SMP /* per-cpu sections scanning */ for_each_possible_cpu(i) scan_block(__per_cpu_start + per_cpu_offset(i), - __per_cpu_end + per_cpu_offset(i), NULL); + __per_cpu_end + per_cpu_offset(i), NULL, 1); #endif /* @@ -960,7 +962,7 @@ static void kmemleak_scan(void) /* only scan if page is in use */ if (page_count(page) == 0) continue; - scan_block(page, page + 1, NULL); + scan_block(page, page + 1, NULL, 1); } } @@ -972,7 +974,8 @@ static void kmemleak_scan(void) read_lock(&tasklist_lock); for_each_process(task) scan_block(task_stack_page(task), - task_stack_page(task) + THREAD_SIZE, NULL); + task_stack_page(task) + THREAD_SIZE, + NULL, 0); read_unlock(&tasklist_lock); } -- cgit v1.2.3 From 288c857d66a400ca4846dd700eb1c4820d738bb9 Mon Sep 17 00:00:00 2001 From: Catalin Marinas Date: Tue, 7 Jul 2009 10:32:57 +0100 Subject: kmemleak: Remove the reported leaks number limitation Since the leaks are no longer printed to the syslog, there is no point in keeping this limitation. All the suspected leaks are shown on /sys/kernel/debug/kmemleak file. Signed-off-by: Catalin Marinas --- mm/kmemleak.c | 17 ++--------------- 1 file changed, 2 insertions(+), 15 deletions(-) diff --git a/mm/kmemleak.c b/mm/kmemleak.c index 93f14818e90..3c2b24c49a8 100644 --- a/mm/kmemleak.c +++ b/mm/kmemleak.c @@ -103,7 +103,6 @@ * Kmemleak configuration and common defines. */ #define MAX_TRACE 16 /* stack trace length */ -#define REPORTS_NR 50 /* maximum number of reported leaks */ #define MSECS_MIN_AGE 5000 /* minimum object age for reporting */ #define SECS_FIRST_SCAN 60 /* delay before the first scan */ #define SECS_SCAN_WAIT 600 /* subsequent auto scanning delay */ @@ -196,9 +195,6 @@ static int kmemleak_stack_scan = 1; /* protects the memory scanning, parameters and debug/kmemleak file access */ static DEFINE_MUTEX(scan_mutex); -/* number of leaks reported (for limitation purposes) */ -static int reported_leaks; - /* * Early object allocation/freeing logging. Kmemleak is initialized after the * kernel allocator. However, both the kernel allocator and kmemleak may @@ -1106,11 +1102,6 @@ static void *kmemleak_seq_start(struct seq_file *seq, loff_t *pos) struct kmemleak_object *object; loff_t n = *pos; - if (!n) - reported_leaks = 0; - if (reported_leaks >= REPORTS_NR) - return NULL; - rcu_read_lock(); list_for_each_entry_rcu(object, &object_list, object_list) { if (n-- > 0) @@ -1135,8 +1126,6 @@ static void *kmemleak_seq_next(struct seq_file *seq, void *v, loff_t *pos) struct list_head *n = &prev_obj->object_list; ++(*pos); - if (reported_leaks >= REPORTS_NR) - goto out; rcu_read_lock(); list_for_each_continue_rcu(n, &object_list) { @@ -1145,7 +1134,7 @@ static void *kmemleak_seq_next(struct seq_file *seq, void *v, loff_t *pos) break; } rcu_read_unlock(); -out: + put_object(prev_obj); return next_obj; } @@ -1168,10 +1157,8 @@ static int kmemleak_seq_show(struct seq_file *seq, void *v) unsigned long flags; spin_lock_irqsave(&object->lock, flags); - if ((object->flags & OBJECT_REPORTED) && unreferenced_object(object)) { + if ((object->flags & OBJECT_REPORTED) && unreferenced_object(object)) print_unreferenced(seq, object); - reported_leaks++; - } spin_unlock_irqrestore(&object->lock, flags); return 0; } -- cgit v1.2.3 From b87324d082d9d898e3c06b2a07a2b94b2430b8ba Mon Sep 17 00:00:00 2001 From: Catalin Marinas Date: Tue, 7 Jul 2009 10:32:58 +0100 Subject: kmemleak: Do not acquire scan_mutex in kmemleak_open() Initially, the scan_mutex was acquired in kmemleak_open() and released in kmemleak_release() (corresponding to /sys/kernel/debug/kmemleak operations). This was causing some lockdep reports when the file was closed from a different task than the one opening it. This patch moves the scan_mutex acquiring in kmemleak_write() or kmemleak_seq_start() with releasing in kmemleak_seq_stop(). Signed-off-by: Catalin Marinas --- mm/kmemleak.c | 63 ++++++++++++++++++++++++++++------------------------------- 1 file changed, 30 insertions(+), 33 deletions(-) diff --git a/mm/kmemleak.c b/mm/kmemleak.c index 3c2b24c49a8..7cfb7d014a2 100644 --- a/mm/kmemleak.c +++ b/mm/kmemleak.c @@ -1101,6 +1101,11 @@ static void *kmemleak_seq_start(struct seq_file *seq, loff_t *pos) { struct kmemleak_object *object; loff_t n = *pos; + int err; + + err = mutex_lock_interruptible(&scan_mutex); + if (err < 0) + return ERR_PTR(err); rcu_read_lock(); list_for_each_entry_rcu(object, &object_list, object_list) { @@ -1144,8 +1149,15 @@ static void *kmemleak_seq_next(struct seq_file *seq, void *v, loff_t *pos) */ static void kmemleak_seq_stop(struct seq_file *seq, void *v) { - if (v) - put_object(v); + if (!IS_ERR(v)) { + /* + * kmemleak_seq_start may return ERR_PTR if the scan_mutex + * waiting was interrupted, so only release it if !IS_ERR. + */ + mutex_unlock(&scan_mutex); + if (v) + put_object(v); + } } /* @@ -1172,36 +1184,15 @@ static const struct seq_operations kmemleak_seq_ops = { static int kmemleak_open(struct inode *inode, struct file *file) { - int ret = 0; - if (!atomic_read(&kmemleak_enabled)) return -EBUSY; - ret = mutex_lock_interruptible(&scan_mutex); - if (ret < 0) - goto out; - if (file->f_mode & FMODE_READ) { - ret = seq_open(file, &kmemleak_seq_ops); - if (ret < 0) - goto scan_unlock; - } - return ret; - -scan_unlock: - mutex_unlock(&scan_mutex); -out: - return ret; + return seq_open(file, &kmemleak_seq_ops); } static int kmemleak_release(struct inode *inode, struct file *file) { - int ret = 0; - - if (file->f_mode & FMODE_READ) - seq_release(inode, file); - mutex_unlock(&scan_mutex); - - return ret; + return seq_release(inode, file); } /* @@ -1221,15 +1212,17 @@ static ssize_t kmemleak_write(struct file *file, const char __user *user_buf, { char buf[64]; int buf_size; - - if (!atomic_read(&kmemleak_enabled)) - return -EBUSY; + int ret; buf_size = min(size, (sizeof(buf) - 1)); if (strncpy_from_user(buf, user_buf, buf_size) < 0) return -EFAULT; buf[buf_size] = 0; + ret = mutex_lock_interruptible(&scan_mutex); + if (ret < 0) + return ret; + if (strncmp(buf, "off", 3) == 0) kmemleak_disable(); else if (strncmp(buf, "stack=on", 8) == 0) @@ -1242,11 +1235,10 @@ static ssize_t kmemleak_write(struct file *file, const char __user *user_buf, stop_scan_thread(); else if (strncmp(buf, "scan=", 5) == 0) { unsigned long secs; - int err; - err = strict_strtoul(buf + 5, 0, &secs); - if (err < 0) - return err; + ret = strict_strtoul(buf + 5, 0, &secs); + if (ret < 0) + goto out; stop_scan_thread(); if (secs) { jiffies_scan_wait = msecs_to_jiffies(secs * 1000); @@ -1255,7 +1247,12 @@ static ssize_t kmemleak_write(struct file *file, const char __user *user_buf, } else if (strncmp(buf, "scan", 4) == 0) kmemleak_scan(); else - return -EINVAL; + ret = -EINVAL; + +out: + mutex_unlock(&scan_mutex); + if (ret < 0) + return ret; /* ignore the rest of the buffer, only one command at a time */ *ppos += size; -- cgit v1.2.3 From 2587362eaf5c9df4e08de11e6340e3c4a88ed4c8 Mon Sep 17 00:00:00 2001 From: Catalin Marinas Date: Tue, 7 Jul 2009 10:32:58 +0100 Subject: kmemleak: Scan objects allocated during a scanning episode Many of the false positives in kmemleak happen on busy systems where objects are allocated during a kmemleak scanning episode. These objects aren't scanned by default until the next memory scan. When such object is added, for example, at the head of a list, it is possible that all the other objects in the list become unreferenced until the next scan. This patch adds checking for newly allocated objects at the end of the scan and repeats the scanning on these objects. If Linux allocates new objects at a higher rate than their scanning, it stops after a predefined number of passes. Signed-off-by: Catalin Marinas --- mm/kmemleak.c | 43 ++++++++++++++++++++++++++++++++++++++++--- 1 file changed, 40 insertions(+), 3 deletions(-) diff --git a/mm/kmemleak.c b/mm/kmemleak.c index 7cfb7d014a2..466d3900726 100644 --- a/mm/kmemleak.c +++ b/mm/kmemleak.c @@ -106,6 +106,7 @@ #define MSECS_MIN_AGE 5000 /* minimum object age for reporting */ #define SECS_FIRST_SCAN 60 /* delay before the first scan */ #define SECS_SCAN_WAIT 600 /* subsequent auto scanning delay */ +#define GRAY_LIST_PASSES 25 /* maximum number of gray list scans */ #define BYTES_PER_POINTER sizeof(void *) @@ -157,6 +158,8 @@ struct kmemleak_object { #define OBJECT_REPORTED (1 << 1) /* flag set to not scan the object */ #define OBJECT_NO_SCAN (1 << 2) +/* flag set on newly allocated objects */ +#define OBJECT_NEW (1 << 3) /* the list of all allocated objects */ static LIST_HEAD(object_list); @@ -270,6 +273,11 @@ static int color_gray(const struct kmemleak_object *object) return object->min_count != -1 && object->count >= object->min_count; } +static int color_black(const struct kmemleak_object *object) +{ + return object->min_count == -1; +} + /* * Objects are considered unreferenced only if their color is white, they have * not be deleted and have a minimum age to avoid false positives caused by @@ -447,7 +455,7 @@ static void create_object(unsigned long ptr, size_t size, int min_count, INIT_HLIST_HEAD(&object->area_list); spin_lock_init(&object->lock); atomic_set(&object->use_count, 1); - object->flags = OBJECT_ALLOCATED; + object->flags = OBJECT_ALLOCATED | OBJECT_NEW; object->pointer = ptr; object->size = size; object->min_count = min_count; @@ -901,6 +909,7 @@ static void kmemleak_scan(void) struct task_struct *task; int i; int new_leaks = 0; + int gray_list_pass = 0; jiffies_last_scan = jiffies; @@ -921,6 +930,7 @@ static void kmemleak_scan(void) #endif /* reset the reference count (whiten the object) */ object->count = 0; + object->flags &= ~OBJECT_NEW; if (color_gray(object) && get_object(object)) list_add_tail(&object->gray_list, &gray_list); @@ -983,6 +993,7 @@ static void kmemleak_scan(void) * kmemleak objects cannot be freed from outside the loop because their * use_count was increased. */ +repeat: object = list_entry(gray_list.next, typeof(*object), gray_list); while (&object->gray_list != &gray_list) { cond_resched(); @@ -1000,12 +1011,38 @@ static void kmemleak_scan(void) object = tmp; } + + if (scan_should_stop() || ++gray_list_pass >= GRAY_LIST_PASSES) + goto scan_end; + + /* + * Check for new objects allocated during this scanning and add them + * to the gray list. + */ + rcu_read_lock(); + list_for_each_entry_rcu(object, &object_list, object_list) { + spin_lock_irqsave(&object->lock, flags); + if ((object->flags & OBJECT_NEW) && !color_black(object) && + get_object(object)) { + object->flags &= ~OBJECT_NEW; + list_add_tail(&object->gray_list, &gray_list); + } + spin_unlock_irqrestore(&object->lock, flags); + } + rcu_read_unlock(); + + if (!list_empty(&gray_list)) + goto repeat; + +scan_end: WARN_ON(!list_empty(&gray_list)); /* - * If scanning was stopped do not report any new unreferenced objects. + * If scanning was stopped or new objects were being allocated at a + * higher rate than gray list scanning, do not report any new + * unreferenced objects. */ - if (scan_should_stop()) + if (scan_should_stop() || gray_list_pass >= GRAY_LIST_PASSES) return; /* -- cgit v1.2.3 From e4f7c0b44a8ac8935f223195af9ea637d0c08091 Mon Sep 17 00:00:00 2001 From: Catalin Marinas Date: Tue, 7 Jul 2009 10:32:59 +0100 Subject: kmemleak: Trace the kmalloc_large* functions in slub The kmalloc_large() and kmalloc_large_node() functions were missed when adding the kmemleak hooks to the slub allocator. However, they should be traced to avoid false positives. Signed-off-by: Catalin Marinas Cc: Christoph Lameter Acked-by: Pekka Enberg --- include/linux/slub_def.h | 2 ++ mm/slub.c | 10 ++++++---- 2 files changed, 8 insertions(+), 4 deletions(-) diff --git a/include/linux/slub_def.h b/include/linux/slub_def.h index 4dcbc2c7149..c1c862b1d01 100644 --- a/include/linux/slub_def.h +++ b/include/linux/slub_def.h @@ -11,6 +11,7 @@ #include #include #include +#include enum stat_item { ALLOC_FASTPATH, /* Allocation from cpu slab */ @@ -233,6 +234,7 @@ static __always_inline void *kmalloc_large(size_t size, gfp_t flags) unsigned int order = get_order(size); void *ret = (void *) __get_free_pages(flags | __GFP_COMP, order); + kmemleak_alloc(ret, size, 1, flags); trace_kmalloc(_THIS_IP_, ret, size, PAGE_SIZE << order, flags); return ret; diff --git a/mm/slub.c b/mm/slub.c index a9201d83178..b9f1491a58a 100644 --- a/mm/slub.c +++ b/mm/slub.c @@ -21,7 +21,6 @@ #include #include #include -#include #include #include #include @@ -2835,13 +2834,15 @@ EXPORT_SYMBOL(__kmalloc); static void *kmalloc_large_node(size_t size, gfp_t flags, int node) { struct page *page; + void *ptr = NULL; flags |= __GFP_COMP | __GFP_NOTRACK; page = alloc_pages_node(node, flags, get_order(size)); if (page) - return page_address(page); - else - return NULL; + ptr = page_address(page); + + kmemleak_alloc(ptr, size, 1, flags); + return ptr; } #ifdef CONFIG_NUMA @@ -2926,6 +2927,7 @@ void kfree(const void *x) page = virt_to_head_page(x); if (unlikely(!PageSlab(page))) { BUG_ON(!PageCompound(page)); + kmemleak_free(x); put_page(page); return; } -- cgit v1.2.3 From 53238a60dd4a679f6fe5613a7ed46899587205cf Mon Sep 17 00:00:00 2001 From: Catalin Marinas Date: Tue, 7 Jul 2009 10:33:00 +0100 Subject: kmemleak: Allow partial freeing of memory blocks Functions like free_bootmem() are allowed to free only part of a memory block. This patch adds support for this via the kmemleak_free_part() callback which removes the original object and creates one or two additional objects as a result of the memory block split. Signed-off-by: Catalin Marinas Cc: Ingo Molnar Acked-by: Pekka Enberg --- include/linux/kmemleak.h | 4 ++ mm/kmemleak.c | 95 +++++++++++++++++++++++++++++++++++++++++------- 2 files changed, 85 insertions(+), 14 deletions(-) diff --git a/include/linux/kmemleak.h b/include/linux/kmemleak.h index 7796aed6cdd..6a63807f714 100644 --- a/include/linux/kmemleak.h +++ b/include/linux/kmemleak.h @@ -27,6 +27,7 @@ extern void kmemleak_init(void); extern void kmemleak_alloc(const void *ptr, size_t size, int min_count, gfp_t gfp); extern void kmemleak_free(const void *ptr); +extern void kmemleak_free_part(const void *ptr, size_t size); extern void kmemleak_padding(const void *ptr, unsigned long offset, size_t size); extern void kmemleak_not_leak(const void *ptr); @@ -71,6 +72,9 @@ static inline void kmemleak_alloc_recursive(const void *ptr, size_t size, static inline void kmemleak_free(const void *ptr) { } +static inline void kmemleak_free_part(const void *ptr, size_t size) +{ +} static inline void kmemleak_free_recursive(const void *ptr, unsigned long flags) { } diff --git a/mm/kmemleak.c b/mm/kmemleak.c index 466d3900726..5aabd41ffb8 100644 --- a/mm/kmemleak.c +++ b/mm/kmemleak.c @@ -210,6 +210,7 @@ static DEFINE_MUTEX(scan_mutex); enum { KMEMLEAK_ALLOC, KMEMLEAK_FREE, + KMEMLEAK_FREE_PART, KMEMLEAK_NOT_LEAK, KMEMLEAK_IGNORE, KMEMLEAK_SCAN_AREA, @@ -523,27 +524,17 @@ out: * Remove the metadata (struct kmemleak_object) for a memory block from the * object_list and object_tree_root and decrement its use_count. */ -static void delete_object(unsigned long ptr) +static void __delete_object(struct kmemleak_object *object) { unsigned long flags; - struct kmemleak_object *object; write_lock_irqsave(&kmemleak_lock, flags); - object = lookup_object(ptr, 0); - if (!object) { -#ifdef DEBUG - kmemleak_warn("Freeing unknown object at 0x%08lx\n", - ptr); -#endif - write_unlock_irqrestore(&kmemleak_lock, flags); - return; - } prio_tree_remove(&object_tree_root, &object->tree_node); list_del_rcu(&object->object_list); write_unlock_irqrestore(&kmemleak_lock, flags); WARN_ON(!(object->flags & OBJECT_ALLOCATED)); - WARN_ON(atomic_read(&object->use_count) < 1); + WARN_ON(atomic_read(&object->use_count) < 2); /* * Locking here also ensures that the corresponding memory block @@ -555,6 +546,64 @@ static void delete_object(unsigned long ptr) put_object(object); } +/* + * Look up the metadata (struct kmemleak_object) corresponding to ptr and + * delete it. + */ +static void delete_object_full(unsigned long ptr) +{ + struct kmemleak_object *object; + + object = find_and_get_object(ptr, 0); + if (!object) { +#ifdef DEBUG + kmemleak_warn("Freeing unknown object at 0x%08lx\n", + ptr); +#endif + return; + } + __delete_object(object); + put_object(object); +} + +/* + * Look up the metadata (struct kmemleak_object) corresponding to ptr and + * delete it. If the memory block is partially freed, the function may create + * additional metadata for the remaining parts of the block. + */ +static void delete_object_part(unsigned long ptr, size_t size) +{ + struct kmemleak_object *object; + unsigned long start, end; + + object = find_and_get_object(ptr, 1); + if (!object) { +#ifdef DEBUG + kmemleak_warn("Partially freeing unknown object at 0x%08lx " + "(size %zu)\n", ptr, size); +#endif + return; + } + __delete_object(object); + + /* + * Create one or two objects that may result from the memory block + * split. Note that partial freeing is only done by free_bootmem() and + * this happens before kmemleak_init() is called. The path below is + * only executed during early log recording in kmemleak_init(), so + * GFP_KERNEL is enough. + */ + start = object->pointer; + end = object->pointer + object->size; + if (ptr > start) + create_object(start, ptr - start, object->min_count, + GFP_KERNEL); + if (ptr + size < end) + create_object(ptr + size, end - ptr - size, object->min_count, + GFP_KERNEL); + + put_object(object); +} /* * Make a object permanently as gray-colored so that it can no longer be * reported as a leak. This is used in general to mark a false positive. @@ -719,12 +768,27 @@ void kmemleak_free(const void *ptr) pr_debug("%s(0x%p)\n", __func__, ptr); if (atomic_read(&kmemleak_enabled) && ptr && !IS_ERR(ptr)) - delete_object((unsigned long)ptr); + delete_object_full((unsigned long)ptr); else if (atomic_read(&kmemleak_early_log)) log_early(KMEMLEAK_FREE, ptr, 0, 0, 0, 0); } EXPORT_SYMBOL_GPL(kmemleak_free); +/* + * Partial memory freeing function callback. This function is usually called + * from bootmem allocator when (part of) a memory block is freed. + */ +void kmemleak_free_part(const void *ptr, size_t size) +{ + pr_debug("%s(0x%p)\n", __func__, ptr); + + if (atomic_read(&kmemleak_enabled) && ptr && !IS_ERR(ptr)) + delete_object_part((unsigned long)ptr, size); + else if (atomic_read(&kmemleak_early_log)) + log_early(KMEMLEAK_FREE_PART, ptr, size, 0, 0, 0); +} +EXPORT_SYMBOL_GPL(kmemleak_free_part); + /* * Mark an already allocated memory block as a false positive. This will cause * the block to no longer be reported as leak and always be scanned. @@ -1318,7 +1382,7 @@ static int kmemleak_cleanup_thread(void *arg) rcu_read_lock(); list_for_each_entry_rcu(object, &object_list, object_list) - delete_object(object->pointer); + delete_object_full(object->pointer); rcu_read_unlock(); mutex_unlock(&scan_mutex); @@ -1413,6 +1477,9 @@ void __init kmemleak_init(void) case KMEMLEAK_FREE: kmemleak_free(log->ptr); break; + case KMEMLEAK_FREE_PART: + kmemleak_free_part(log->ptr, log->size); + break; case KMEMLEAK_NOT_LEAK: kmemleak_not_leak(log->ptr); break; -- cgit v1.2.3 From ec3a354bd46cbdaa7933ba57a142ee2d2dbde0e5 Mon Sep 17 00:00:00 2001 From: Catalin Marinas Date: Tue, 7 Jul 2009 10:33:01 +0100 Subject: kmemleak: Add callbacks to the bootmem allocator This patch adds kmemleak_alloc/free callbacks to the bootmem allocator. This would allow scanning of such blocks and help avoiding a whole class of false positives and more kmemleak annotations. Signed-off-by: Catalin Marinas Cc: Ingo Molnar Acked-by: Pekka Enberg Reviewed-by: Johannes Weiner --- mm/bootmem.c | 6 ++++++ 1 file changed, 6 insertions(+) diff --git a/mm/bootmem.c b/mm/bootmem.c index d2a9ce95276..701740c9e81 100644 --- a/mm/bootmem.c +++ b/mm/bootmem.c @@ -12,6 +12,7 @@ #include #include #include +#include #include #include @@ -335,6 +336,8 @@ void __init free_bootmem_node(pg_data_t *pgdat, unsigned long physaddr, { unsigned long start, end; + kmemleak_free_part(__va(physaddr), size); + start = PFN_UP(physaddr); end = PFN_DOWN(physaddr + size); @@ -354,6 +357,8 @@ void __init free_bootmem(unsigned long addr, unsigned long size) { unsigned long start, end; + kmemleak_free_part(__va(addr), size); + start = PFN_UP(addr); end = PFN_DOWN(addr + size); @@ -516,6 +521,7 @@ find_block: region = phys_to_virt(PFN_PHYS(bdata->node_min_pfn) + start_off); memset(region, 0, size); + kmemleak_alloc(region, size, 1, 0); return region; } -- cgit v1.2.3 From b7d4de7ff03085fda8310b2983b907166dd40f43 Mon Sep 17 00:00:00 2001 From: Daniel Mack Date: Wed, 8 Jul 2009 19:24:26 +0200 Subject: ASoC: Fix NULL pointer dereference in __pxa2xx_pcm_hw_free Check for rtd->params->drcmr != NULL before accessing it. Signed-off-by: Daniel Mack Signed-off-by: Mark Brown --- sound/arm/pxa2xx-pcm-lib.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/sound/arm/pxa2xx-pcm-lib.c b/sound/arm/pxa2xx-pcm-lib.c index 108b643229b..6205f37d547 100644 --- a/sound/arm/pxa2xx-pcm-lib.c +++ b/sound/arm/pxa2xx-pcm-lib.c @@ -75,7 +75,7 @@ int __pxa2xx_pcm_hw_free(struct snd_pcm_substream *substream) { struct pxa2xx_runtime_data *rtd = substream->runtime->private_data; - if (rtd && rtd->params) + if (rtd && rtd->params && rtd->params->drcmr) *rtd->params->drcmr = 0; snd_pcm_set_runtime_buffer(substream, NULL); -- cgit v1.2.3 From a0b98ec87d7a293a7d9ab8e45935c53a68f3094a Mon Sep 17 00:00:00 2001 From: Hartley Sweeten Date: Mon, 6 Jul 2009 22:17:54 +0100 Subject: [ARM] 5595/1: ep93xx: missing header in dma-m2p.c was getting included by , is should be included by this file. Signed-off-by: H Hartley Sweeten Signed-off-by: Russell King --- arch/arm/mach-ep93xx/dma-m2p.c | 1 + 1 file changed, 1 insertion(+) diff --git a/arch/arm/mach-ep93xx/dma-m2p.c b/arch/arm/mach-ep93xx/dma-m2p.c index a2df5bb7dff..dbcac9c40a2 100644 --- a/arch/arm/mach-ep93xx/dma-m2p.c +++ b/arch/arm/mach-ep93xx/dma-m2p.c @@ -33,6 +33,7 @@ #include #include #include +#include #include #include -- cgit v1.2.3 From 6860107a46c8762d35eb7bf71bcf6c6510793b76 Mon Sep 17 00:00:00 2001 From: Linus Walleij Date: Mon, 6 Jul 2009 18:04:28 +0100 Subject: [ARM] 5594/1: Correct U300 VIC init PM setting This makes the VIC resume from suspend flagged IRQ:s identical to the flags indicating all possible interrupts. This is perhaps not the optimal setting but setting it to 0 makes the system suspend and never come back again (all IRQ sources masked off). Signed-off-by: Linus Walleij Signed-off-by: Russell King --- arch/arm/mach-u300/core.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/arch/arm/mach-u300/core.c b/arch/arm/mach-u300/core.c index 89b3ccf35e1..7936085dd75 100644 --- a/arch/arm/mach-u300/core.c +++ b/arch/arm/mach-u300/core.c @@ -455,8 +455,8 @@ void __init u300_init_irq(void) for (i = 0; i < NR_IRQS; i++) set_bit(i, (unsigned long *) &mask[0]); u300_enable_intcon_clock(); - vic_init((void __iomem *) U300_INTCON0_VBASE, 0, mask[0], 0); - vic_init((void __iomem *) U300_INTCON1_VBASE, 32, mask[1], 0); + vic_init((void __iomem *) U300_INTCON0_VBASE, 0, mask[0], mask[0]); + vic_init((void __iomem *) U300_INTCON1_VBASE, 32, mask[1], mask[1]); } -- cgit v1.2.3 From 264ef8a904943ed7d0b04fa958894d7a5c2b2c61 Mon Sep 17 00:00:00 2001 From: Catalin Marinas Date: Tue, 7 Jul 2009 10:33:01 +0100 Subject: kmemleak: Remove alloc_bootmem annotations introduced in the past kmemleak_alloc() calls were added in some places where alloc_bootmem was called. Since now kmemleak tracks bootmem allocations, these explicit calls should be run. Signed-off-by: Catalin Marinas Cc: Ingo Molnar Acked-by: Pekka Enberg --- kernel/pid.c | 7 ------- mm/page_alloc.c | 14 +++----------- 2 files changed, 3 insertions(+), 18 deletions(-) diff --git a/kernel/pid.c b/kernel/pid.c index 5fa1db48d8b..31310b5d3f5 100644 --- a/kernel/pid.c +++ b/kernel/pid.c @@ -36,7 +36,6 @@ #include #include #include -#include #define pid_hashfn(nr, ns) \ hash_long((unsigned long)nr + (unsigned long)ns, pidhash_shift) @@ -513,12 +512,6 @@ void __init pidhash_init(void) pid_hash = alloc_bootmem(pidhash_size * sizeof(*(pid_hash))); if (!pid_hash) panic("Could not alloc pidhash!\n"); - /* - * pid_hash contains references to allocated struct pid objects and it - * must be scanned by kmemleak to avoid false positives. - */ - kmemleak_alloc(pid_hash, pidhash_size * sizeof(*(pid_hash)), 0, - GFP_KERNEL); for (i = 0; i < pidhash_size; i++) INIT_HLIST_HEAD(&pid_hash[i]); } diff --git a/mm/page_alloc.c b/mm/page_alloc.c index ad7cd1c56b0..3ef628845f0 100644 --- a/mm/page_alloc.c +++ b/mm/page_alloc.c @@ -4745,8 +4745,10 @@ void *__init alloc_large_system_hash(const char *tablename, * some pages at the end of hash table which * alloc_pages_exact() automatically does */ - if (get_order(size) < MAX_ORDER) + if (get_order(size) < MAX_ORDER) { table = alloc_pages_exact(size, GFP_ATOMIC); + kmemleak_alloc(table, size, 1, GFP_ATOMIC); + } } } while (!table && size > PAGE_SIZE && --log2qty); @@ -4764,16 +4766,6 @@ void *__init alloc_large_system_hash(const char *tablename, if (_hash_mask) *_hash_mask = (1 << log2qty) - 1; - /* - * If hashdist is set, the table allocation is done with __vmalloc() - * which invokes the kmemleak_alloc() callback. This function may also - * be called before the slab and kmemleak are initialised when - * kmemleak simply buffers the request to be executed later - * (GFP_ATOMIC flag ignored in this case). - */ - if (!hashdist) - kmemleak_alloc(table, size, 1, GFP_ATOMIC); - return table; } -- cgit v1.2.3 From 9590b7ba3fefdfe0c7741f5e2f61faf2ffcea19c Mon Sep 17 00:00:00 2001 From: Anton Blanchard Date: Mon, 6 Jul 2009 22:01:31 +1000 Subject: perf_counter tools: Rename cache events to remove $ The cache events contain '$' which will hit shell variable expansion. To avoid confusion change this to 'cache', ie L1-d$-loads becomes L1-dcache-loads. Signed-off-by: Anton Blanchard Cc: Roland Dreier Cc: Jaswinder Singh Rajput Cc: Peter Zijlstra LKML-Reference: <20090706120131.GB4391@kryten> Signed-off-by: Ingo Molnar --- tools/perf/util/parse-events.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/tools/perf/util/parse-events.c b/tools/perf/util/parse-events.c index 5184959e061..518a33affe1 100644 --- a/tools/perf/util/parse-events.c +++ b/tools/perf/util/parse-events.c @@ -71,8 +71,8 @@ static char *sw_event_names[] = { #define MAX_ALIASES 8 static char *hw_cache[][MAX_ALIASES] = { - { "L1-d$", "l1-d", "l1d", "L1-data", }, - { "L1-i$", "l1-i", "l1i", "L1-instruction", }, + { "L1-dcache", "l1-d", "l1d", "L1-data", }, + { "L1-icache", "l1-i", "l1i", "L1-instruction", }, { "LLC", "L2" }, { "dTLB", "d-tlb", "Data-TLB", }, { "iTLB", "i-tlb", "Instruction-TLB", }, -- cgit v1.2.3 From 11d1578f9454159c43499d1d8fe8a7d728c176a3 Mon Sep 17 00:00:00 2001 From: Vince Weaver Date: Wed, 8 Jul 2009 17:46:14 -0400 Subject: perf_counter: Add P6 PMU support Add basic P6 PMU support. The P6 uses the EVNTSEL0 EN bit to enable/disable both its counters. We use this for the global enable/disable, and clear all config bits (except EN) to disable individual counters. Actual ia32 hardware doesn't support lfence, so use a locked op without side-effect to implement a full barrier. perf stat and perf record seem to function correctly. [a.p.zijlstra@chello.nl: cleanups and complete the enable/disable code] Signed-off-by: Vince Weaver Signed-off-by: Peter Zijlstra LKML-Reference: Signed-off-by: Ingo Molnar --- arch/x86/kernel/cpu/perf_counter.c | 227 ++++++++++++++++++++++++++++++++++--- tools/perf/perf.h | 8 +- 2 files changed, 220 insertions(+), 15 deletions(-) diff --git a/arch/x86/kernel/cpu/perf_counter.c b/arch/x86/kernel/cpu/perf_counter.c index 36c3dc7b899..1910f39ff19 100644 --- a/arch/x86/kernel/cpu/perf_counter.c +++ b/arch/x86/kernel/cpu/perf_counter.c @@ -65,6 +65,44 @@ static DEFINE_PER_CPU(struct cpu_hw_counters, cpu_hw_counters) = { .enabled = 1, }; +/* + * Not sure about some of these + */ +static const u64 p6_perfmon_event_map[] = +{ + [PERF_COUNT_HW_CPU_CYCLES] = 0x0079, + [PERF_COUNT_HW_INSTRUCTIONS] = 0x00c0, + [PERF_COUNT_HW_CACHE_REFERENCES] = 0x0000, + [PERF_COUNT_HW_CACHE_MISSES] = 0x0000, + [PERF_COUNT_HW_BRANCH_INSTRUCTIONS] = 0x00c4, + [PERF_COUNT_HW_BRANCH_MISSES] = 0x00c5, + [PERF_COUNT_HW_BUS_CYCLES] = 0x0062, +}; + +static u64 p6_pmu_event_map(int event) +{ + return p6_perfmon_event_map[event]; +} + +static u64 p6_pmu_raw_event(u64 event) +{ +#define P6_EVNTSEL_EVENT_MASK 0x000000FFULL +#define P6_EVNTSEL_UNIT_MASK 0x0000FF00ULL +#define P6_EVNTSEL_EDGE_MASK 0x00040000ULL +#define P6_EVNTSEL_INV_MASK 0x00800000ULL +#define P6_EVNTSEL_COUNTER_MASK 0xFF000000ULL + +#define P6_EVNTSEL_MASK \ + (P6_EVNTSEL_EVENT_MASK | \ + P6_EVNTSEL_UNIT_MASK | \ + P6_EVNTSEL_EDGE_MASK | \ + P6_EVNTSEL_INV_MASK | \ + P6_EVNTSEL_COUNTER_MASK) + + return event & P6_EVNTSEL_MASK; +} + + /* * Intel PerfMon v3. Used on Core2 and later. */ @@ -726,6 +764,23 @@ static int __hw_perf_counter_init(struct perf_counter *counter) return 0; } +static void p6_pmu_disable_all(void) +{ + struct cpu_hw_counters *cpuc = &__get_cpu_var(cpu_hw_counters); + unsigned long val; + + if (!cpuc->enabled) + return; + + cpuc->enabled = 0; + barrier(); + + /* p6 only has one enable register */ + rdmsrl(MSR_P6_EVNTSEL0, val); + val &= ~ARCH_PERFMON_EVENTSEL0_ENABLE; + wrmsrl(MSR_P6_EVNTSEL0, val); +} + static void intel_pmu_disable_all(void) { wrmsrl(MSR_CORE_PERF_GLOBAL_CTRL, 0); @@ -767,6 +822,23 @@ void hw_perf_disable(void) return x86_pmu.disable_all(); } +static void p6_pmu_enable_all(void) +{ + struct cpu_hw_counters *cpuc = &__get_cpu_var(cpu_hw_counters); + unsigned long val; + + if (cpuc->enabled) + return; + + cpuc->enabled = 1; + barrier(); + + /* p6 only has one enable register */ + rdmsrl(MSR_P6_EVNTSEL0, val); + val |= ARCH_PERFMON_EVENTSEL0_ENABLE; + wrmsrl(MSR_P6_EVNTSEL0, val); +} + static void intel_pmu_enable_all(void) { wrmsrl(MSR_CORE_PERF_GLOBAL_CTRL, x86_pmu.intel_ctrl); @@ -819,16 +891,13 @@ static inline void intel_pmu_ack_status(u64 ack) static inline void x86_pmu_enable_counter(struct hw_perf_counter *hwc, int idx) { - int err; - err = checking_wrmsrl(hwc->config_base + idx, + (void)checking_wrmsrl(hwc->config_base + idx, hwc->config | ARCH_PERFMON_EVENTSEL0_ENABLE); } static inline void x86_pmu_disable_counter(struct hw_perf_counter *hwc, int idx) { - int err; - err = checking_wrmsrl(hwc->config_base + idx, - hwc->config); + (void)checking_wrmsrl(hwc->config_base + idx, hwc->config); } static inline void @@ -836,13 +905,24 @@ intel_pmu_disable_fixed(struct hw_perf_counter *hwc, int __idx) { int idx = __idx - X86_PMC_IDX_FIXED; u64 ctrl_val, mask; - int err; mask = 0xfULL << (idx * 4); rdmsrl(hwc->config_base, ctrl_val); ctrl_val &= ~mask; - err = checking_wrmsrl(hwc->config_base, ctrl_val); + (void)checking_wrmsrl(hwc->config_base, ctrl_val); +} + +static inline void +p6_pmu_disable_counter(struct hw_perf_counter *hwc, int idx) +{ + struct cpu_hw_counters *cpuc = &__get_cpu_var(cpu_hw_counters); + unsigned long val = ARCH_PERFMON_EVENTSEL0_ENABLE; + + if (!cpuc->enabled) + val = 0; + + (void)checking_wrmsrl(hwc->config_base + idx, val); } static inline void @@ -943,6 +1023,17 @@ intel_pmu_enable_fixed(struct hw_perf_counter *hwc, int __idx) err = checking_wrmsrl(hwc->config_base, ctrl_val); } +static void p6_pmu_enable_counter(struct hw_perf_counter *hwc, int idx) +{ + struct cpu_hw_counters *cpuc = &__get_cpu_var(cpu_hw_counters); + + if (cpuc->enabled) + x86_pmu_enable_counter(hwc, idx); + else + x86_pmu_disable_counter(hwc, idx); +} + + static void intel_pmu_enable_counter(struct hw_perf_counter *hwc, int idx) { if (unlikely(hwc->config_base == MSR_ARCH_PERFMON_FIXED_CTR_CTRL)) { @@ -1176,6 +1267,49 @@ static void intel_pmu_reset(void) local_irq_restore(flags); } +static int p6_pmu_handle_irq(struct pt_regs *regs) +{ + struct perf_sample_data data; + struct cpu_hw_counters *cpuc; + struct perf_counter *counter; + struct hw_perf_counter *hwc; + int idx, handled = 0; + u64 val; + + data.regs = regs; + data.addr = 0; + + cpuc = &__get_cpu_var(cpu_hw_counters); + + for (idx = 0; idx < x86_pmu.num_counters; idx++) { + if (!test_bit(idx, cpuc->active_mask)) + continue; + + counter = cpuc->counters[idx]; + hwc = &counter->hw; + + val = x86_perf_counter_update(counter, hwc, idx); + if (val & (1ULL << (x86_pmu.counter_bits - 1))) + continue; + + /* + * counter overflow + */ + handled = 1; + data.period = counter->hw.last_period; + + if (!x86_perf_counter_set_period(counter, hwc, idx)) + continue; + + if (perf_counter_overflow(counter, 1, &data)) + p6_pmu_disable_counter(hwc, idx); + } + + if (handled) + inc_irq_stat(apic_perf_irqs); + + return handled; +} /* * This handler is triggered by the local APIC, so the APIC IRQ handling @@ -1185,14 +1319,13 @@ static int intel_pmu_handle_irq(struct pt_regs *regs) { struct perf_sample_data data; struct cpu_hw_counters *cpuc; - int bit, cpu, loops; + int bit, loops; u64 ack, status; data.regs = regs; data.addr = 0; - cpu = smp_processor_id(); - cpuc = &per_cpu(cpu_hw_counters, cpu); + cpuc = &__get_cpu_var(cpu_hw_counters); perf_disable(); status = intel_pmu_get_status(); @@ -1249,14 +1382,13 @@ static int amd_pmu_handle_irq(struct pt_regs *regs) struct cpu_hw_counters *cpuc; struct perf_counter *counter; struct hw_perf_counter *hwc; - int cpu, idx, handled = 0; + int idx, handled = 0; u64 val; data.regs = regs; data.addr = 0; - cpu = smp_processor_id(); - cpuc = &per_cpu(cpu_hw_counters, cpu); + cpuc = &__get_cpu_var(cpu_hw_counters); for (idx = 0; idx < x86_pmu.num_counters; idx++) { if (!test_bit(idx, cpuc->active_mask)) @@ -1353,6 +1485,32 @@ static __read_mostly struct notifier_block perf_counter_nmi_notifier = { .priority = 1 }; +static struct x86_pmu p6_pmu = { + .name = "p6", + .handle_irq = p6_pmu_handle_irq, + .disable_all = p6_pmu_disable_all, + .enable_all = p6_pmu_enable_all, + .enable = p6_pmu_enable_counter, + .disable = p6_pmu_disable_counter, + .eventsel = MSR_P6_EVNTSEL0, + .perfctr = MSR_P6_PERFCTR0, + .event_map = p6_pmu_event_map, + .raw_event = p6_pmu_raw_event, + .max_events = ARRAY_SIZE(p6_perfmon_event_map), + .max_period = (1ULL << 31) - 1, + .version = 0, + .num_counters = 2, + /* + * Counters have 40 bits implemented. However they are designed such + * that bits [32-39] are sign extensions of bit 31. As such the + * effective width of a counter for P6-like PMU is 32 bits only. + * + * See IA-32 Intel Architecture Software developer manual Vol 3B + */ + .counter_bits = 32, + .counter_mask = (1ULL << 32) - 1, +}; + static struct x86_pmu intel_pmu = { .name = "Intel", .handle_irq = intel_pmu_handle_irq, @@ -1392,6 +1550,41 @@ static struct x86_pmu amd_pmu = { .max_period = (1ULL << 47) - 1, }; +static int p6_pmu_init(void) +{ + int high, low; + + switch (boot_cpu_data.x86_model) { + case 1: + case 3: /* Pentium Pro */ + case 5: + case 6: /* Pentium II */ + case 7: + case 8: + case 11: /* Pentium III */ + break; + case 9: + case 13: + /* for Pentium M, we need to check if PMU exist */ + rdmsr(MSR_IA32_MISC_ENABLE, low, high); + if (low & MSR_IA32_MISC_ENABLE_EMON) + break; + default: + pr_cont("unsupported p6 CPU model %d ", + boot_cpu_data.x86_model); + return -ENODEV; + } + + if (!cpu_has_apic) { + pr_info("no Local APIC, try rebooting with lapic"); + return -ENODEV; + } + + x86_pmu = p6_pmu; + + return 0; +} + static int intel_pmu_init(void) { union cpuid10_edx edx; @@ -1400,8 +1593,14 @@ static int intel_pmu_init(void) unsigned int ebx; int version; - if (!cpu_has(&boot_cpu_data, X86_FEATURE_ARCH_PERFMON)) + if (!cpu_has(&boot_cpu_data, X86_FEATURE_ARCH_PERFMON)) { + /* check for P6 processor family */ + if (boot_cpu_data.x86 == 6) { + return p6_pmu_init(); + } else { return -ENODEV; + } + } /* * Check whether the Architectural PerfMon supports diff --git a/tools/perf/perf.h b/tools/perf/perf.h index 27887c91643..53bb9550def 100644 --- a/tools/perf/perf.h +++ b/tools/perf/perf.h @@ -1,7 +1,13 @@ #ifndef _PERF_PERF_H #define _PERF_PERF_H -#if defined(__x86_64__) || defined(__i386__) +#if defined(__i386__) +#include "../../arch/x86/include/asm/unistd.h" +#define rmb() asm volatile("lock; addl $0,0(%%esp)" ::: "memory") +#define cpu_relax() asm volatile("rep; nop" ::: "memory"); +#endif + +#if defined(__x86_64__) #include "../../arch/x86/include/asm/unistd.h" #define rmb() asm volatile("lfence" ::: "memory") #define cpu_relax() asm volatile("rep; nop" ::: "memory"); -- cgit v1.2.3 From 9c74fb50867e8fb5f3be3be06716492c0f79309e Mon Sep 17 00:00:00 2001 From: Peter Zijlstra Date: Wed, 8 Jul 2009 10:21:41 +0200 Subject: perf_counter: Fix up P6 PMU details The P6 doesn't seem to support cache ref/hit/miss counts, so we extend the generic hardware event codes to have 0 and -1 mean the same thing as for the generic cache events. Furthermore, it turns out the 0 event does not count (that is, its reported that on PPro it actually does count something), therefore use a event configuration that's specified not to count to disable the counters. Signed-off-by: Peter Zijlstra LKML-Reference: Signed-off-by: Ingo Molnar --- arch/x86/kernel/cpu/perf_counter.c | 28 +++++++++++++++++++++++----- 1 file changed, 23 insertions(+), 5 deletions(-) diff --git a/arch/x86/kernel/cpu/perf_counter.c b/arch/x86/kernel/cpu/perf_counter.c index 1910f39ff19..c7cc6eac14e 100644 --- a/arch/x86/kernel/cpu/perf_counter.c +++ b/arch/x86/kernel/cpu/perf_counter.c @@ -84,6 +84,14 @@ static u64 p6_pmu_event_map(int event) return p6_perfmon_event_map[event]; } +/* + * Counter setting that is specified not to count anything. + * We use this to effectively disable a counter. + * + * L2_RQSTS with 0 MESI unit mask. + */ +#define P6_NOP_COUNTER 0x0000002EULL + static u64 p6_pmu_raw_event(u64 event) { #define P6_EVNTSEL_EVENT_MASK 0x000000FFULL @@ -704,6 +712,7 @@ static int __hw_perf_counter_init(struct perf_counter *counter) { struct perf_counter_attr *attr = &counter->attr; struct hw_perf_counter *hwc = &counter->hw; + u64 config; int err; if (!x86_pmu_initialized()) @@ -756,10 +765,19 @@ static int __hw_perf_counter_init(struct perf_counter *counter) if (attr->config >= x86_pmu.max_events) return -EINVAL; + /* * The generic map: */ - hwc->config |= x86_pmu.event_map(attr->config); + config = x86_pmu.event_map(attr->config); + + if (config == 0) + return -ENOENT; + + if (config == -1LL) + return -EINVAL; + + hwc->config |= config; return 0; } @@ -767,7 +785,7 @@ static int __hw_perf_counter_init(struct perf_counter *counter) static void p6_pmu_disable_all(void) { struct cpu_hw_counters *cpuc = &__get_cpu_var(cpu_hw_counters); - unsigned long val; + u64 val; if (!cpuc->enabled) return; @@ -917,10 +935,10 @@ static inline void p6_pmu_disable_counter(struct hw_perf_counter *hwc, int idx) { struct cpu_hw_counters *cpuc = &__get_cpu_var(cpu_hw_counters); - unsigned long val = ARCH_PERFMON_EVENTSEL0_ENABLE; + u64 val = P6_NOP_COUNTER; - if (!cpuc->enabled) - val = 0; + if (cpuc->enabled) + val |= ARCH_PERFMON_EVENTSEL0_ENABLE; (void)checking_wrmsrl(hwc->config_base + idx, val); } -- cgit v1.2.3 From 984b838ce69c063a91b87550598ab7f3439dd94a Mon Sep 17 00:00:00 2001 From: Peter Zijlstra Date: Fri, 10 Jul 2009 09:59:56 +0200 Subject: perf_counter: Clean up global vs counter enable Ingo noticed that both AMD and P6 call x86_pmu_disable_counter() on *_pmu_enable_counter(). This is because we rely on the side effect of that call to program the event config but not touch the EN bit. We change that for AMD by having enable_all() simply write the full config in, and for P6 by explicitly coding it. Signed-off-by: Peter Zijlstra LKML-Reference: Signed-off-by: Ingo Molnar --- arch/x86/kernel/cpu/perf_counter.c | 16 ++++++++-------- 1 file changed, 8 insertions(+), 8 deletions(-) diff --git a/arch/x86/kernel/cpu/perf_counter.c b/arch/x86/kernel/cpu/perf_counter.c index c7cc6eac14e..bed1c4c2f25 100644 --- a/arch/x86/kernel/cpu/perf_counter.c +++ b/arch/x86/kernel/cpu/perf_counter.c @@ -874,13 +874,13 @@ static void amd_pmu_enable_all(void) barrier(); for (idx = 0; idx < x86_pmu.num_counters; idx++) { + struct perf_counter *counter = cpuc->counters[idx]; u64 val; if (!test_bit(idx, cpuc->active_mask)) continue; - rdmsrl(MSR_K7_EVNTSEL0 + idx, val); - if (val & ARCH_PERFMON_EVENTSEL0_ENABLE) - continue; + + val = counter->hw.config; val |= ARCH_PERFMON_EVENTSEL0_ENABLE; wrmsrl(MSR_K7_EVNTSEL0 + idx, val); } @@ -1044,11 +1044,13 @@ intel_pmu_enable_fixed(struct hw_perf_counter *hwc, int __idx) static void p6_pmu_enable_counter(struct hw_perf_counter *hwc, int idx) { struct cpu_hw_counters *cpuc = &__get_cpu_var(cpu_hw_counters); + u64 val; + val = hwc->config; if (cpuc->enabled) - x86_pmu_enable_counter(hwc, idx); - else - x86_pmu_disable_counter(hwc, idx); + val |= ARCH_PERFMON_EVENTSEL0_ENABLE; + + (void)checking_wrmsrl(hwc->config_base + idx, val); } @@ -1068,8 +1070,6 @@ static void amd_pmu_enable_counter(struct hw_perf_counter *hwc, int idx) if (cpuc->enabled) x86_pmu_enable_counter(hwc, idx); - else - x86_pmu_disable_counter(hwc, idx); } static int -- cgit v1.2.3 From 71a851b4d2a815adcfac09c1adda7ef6811fde66 Mon Sep 17 00:00:00 2001 From: Peter Zijlstra Date: Fri, 10 Jul 2009 09:06:56 +0200 Subject: perf_counter: Stop open coding unclone_ctx Instead of open coding the unclone context thingy, put it in a common function. Signed-off-by: Peter Zijlstra LKML-Reference: Signed-off-by: Ingo Molnar --- kernel/perf_counter.c | 36 +++++++++++++++++------------------- 1 file changed, 17 insertions(+), 19 deletions(-) diff --git a/kernel/perf_counter.c b/kernel/perf_counter.c index d55a50da234..8bf997d86bf 100644 --- a/kernel/perf_counter.c +++ b/kernel/perf_counter.c @@ -146,6 +146,14 @@ static void put_ctx(struct perf_counter_context *ctx) } } +static void unclone_ctx(struct perf_counter_context *ctx) +{ + if (ctx->parent_ctx) { + put_ctx(ctx->parent_ctx); + ctx->parent_ctx = NULL; + } +} + /* * Get the perf_counter_context for a task and lock it. * This has to cope with with the fact that until it is locked, @@ -1463,10 +1471,8 @@ static void perf_counter_enable_on_exec(struct task_struct *task) /* * Unclone this context if we enabled any counter. */ - if (enabled && ctx->parent_ctx) { - put_ctx(ctx->parent_ctx); - ctx->parent_ctx = NULL; - } + if (enabled) + unclone_ctx(ctx); spin_unlock(&ctx->lock); @@ -1526,7 +1532,6 @@ __perf_counter_init_context(struct perf_counter_context *ctx, static struct perf_counter_context *find_get_context(pid_t pid, int cpu) { - struct perf_counter_context *parent_ctx; struct perf_counter_context *ctx; struct perf_cpu_context *cpuctx; struct task_struct *task; @@ -1586,11 +1591,7 @@ static struct perf_counter_context *find_get_context(pid_t pid, int cpu) retry: ctx = perf_lock_task_context(task, &flags); if (ctx) { - parent_ctx = ctx->parent_ctx; - if (parent_ctx) { - put_ctx(parent_ctx); - ctx->parent_ctx = NULL; /* no longer a clone */ - } + unclone_ctx(ctx); spin_unlock_irqrestore(&ctx->lock, flags); } @@ -4255,15 +4256,12 @@ void perf_counter_exit_task(struct task_struct *child) */ spin_lock(&child_ctx->lock); child->perf_counter_ctxp = NULL; - if (child_ctx->parent_ctx) { - /* - * This context is a clone; unclone it so it can't get - * swapped to another process while we're removing all - * the counters from it. - */ - put_ctx(child_ctx->parent_ctx); - child_ctx->parent_ctx = NULL; - } + /* + * If this context is a clone; unclone it so it can't get + * swapped to another process while we're removing all + * the counters from it. + */ + unclone_ctx(child_ctx); spin_unlock(&child_ctx->lock); local_irq_restore(flags); -- cgit v1.2.3 From a1ba4d8ba9f06a397e97cbd67a93ee306860b40a Mon Sep 17 00:00:00 2001 From: Peter Zijlstra Date: Wed, 1 Apr 2009 18:40:15 +0200 Subject: sched_rt: Fix overload bug on rt group scheduling Fixes an easily triggerable BUG() when setting process affinities. Make sure to count the number of migratable tasks in the same place: the root rt_rq. Otherwise the number doesn't make sense and we'll hit the BUG in set_cpus_allowed_rt(). Also, make sure we only count tasks, not groups (this is probably already taken care of by the fact that rt_se->nr_cpus_allowed will be 0 for groups, but be more explicit) Tested-by: Thomas Gleixner CC: stable@kernel.org Signed-off-by: Peter Zijlstra Acked-by: Gregory Haskins LKML-Reference: <1247067476.9777.57.camel@twins> Signed-off-by: Ingo Molnar --- kernel/sched.c | 1 + kernel/sched_rt.c | 18 +++++++++++++++++- 2 files changed, 18 insertions(+), 1 deletion(-) diff --git a/kernel/sched.c b/kernel/sched.c index 7c9098d186e..a17f3d9a8bf 100644 --- a/kernel/sched.c +++ b/kernel/sched.c @@ -493,6 +493,7 @@ struct rt_rq { #endif #ifdef CONFIG_SMP unsigned long rt_nr_migratory; + unsigned long rt_nr_total; int overloaded; struct plist_head pushable_tasks; #endif diff --git a/kernel/sched_rt.c b/kernel/sched_rt.c index 9bf0d2a7304..3918e01994e 100644 --- a/kernel/sched_rt.c +++ b/kernel/sched_rt.c @@ -10,6 +10,8 @@ static inline struct task_struct *rt_task_of(struct sched_rt_entity *rt_se) #ifdef CONFIG_RT_GROUP_SCHED +#define rt_entity_is_task(rt_se) (!(rt_se)->my_q) + static inline struct rq *rq_of_rt_rq(struct rt_rq *rt_rq) { return rt_rq->rq; @@ -22,6 +24,8 @@ static inline struct rt_rq *rt_rq_of_se(struct sched_rt_entity *rt_se) #else /* CONFIG_RT_GROUP_SCHED */ +#define rt_entity_is_task(rt_se) (1) + static inline struct rq *rq_of_rt_rq(struct rt_rq *rt_rq) { return container_of(rt_rq, struct rq, rt); @@ -73,7 +77,7 @@ static inline void rt_clear_overload(struct rq *rq) static void update_rt_migration(struct rt_rq *rt_rq) { - if (rt_rq->rt_nr_migratory && (rt_rq->rt_nr_running > 1)) { + if (rt_rq->rt_nr_migratory && rt_rq->rt_nr_total > 1) { if (!rt_rq->overloaded) { rt_set_overload(rq_of_rt_rq(rt_rq)); rt_rq->overloaded = 1; @@ -86,6 +90,12 @@ static void update_rt_migration(struct rt_rq *rt_rq) static void inc_rt_migration(struct sched_rt_entity *rt_se, struct rt_rq *rt_rq) { + if (!rt_entity_is_task(rt_se)) + return; + + rt_rq = &rq_of_rt_rq(rt_rq)->rt; + + rt_rq->rt_nr_total++; if (rt_se->nr_cpus_allowed > 1) rt_rq->rt_nr_migratory++; @@ -94,6 +104,12 @@ static void inc_rt_migration(struct sched_rt_entity *rt_se, struct rt_rq *rt_rq) static void dec_rt_migration(struct sched_rt_entity *rt_se, struct rt_rq *rt_rq) { + if (!rt_entity_is_task(rt_se)) + return; + + rt_rq = &rq_of_rt_rq(rt_rq)->rt; + + rt_rq->rt_nr_total--; if (rt_se->nr_cpus_allowed > 1) rt_rq->rt_nr_migratory--; -- cgit v1.2.3 From 7793527b90d9418211f4fe8464cc1dcb1631ea1b Mon Sep 17 00:00:00 2001 From: Lucas De Marchi Date: Thu, 9 Jul 2009 13:57:20 +0200 Subject: sched: Reset sched stats on fork() The sched_stat fields are currently not reset upon fork. Ingo's recent commit 6c594c21fcb02c662f11c97be4d7d2b73060a205 did reset nr_migrations, but it didn't reset any of the others. This patch resets all sched_stat fields on fork. Signed-off-by: Lucas De Marchi Signed-off-by: Peter Zijlstra LKML-Reference: <193b0f820907090457s7a3662f4gcdecdc22fcae857b@mail.gmail.com> Signed-off-by: Ingo Molnar --- kernel/sched.c | 40 +++++++++++++++++++++++++++++++--------- 1 file changed, 31 insertions(+), 9 deletions(-) diff --git a/kernel/sched.c b/kernel/sched.c index a17f3d9a8bf..c4549bd7e17 100644 --- a/kernel/sched.c +++ b/kernel/sched.c @@ -2572,15 +2572,37 @@ static void __sched_fork(struct task_struct *p) p->se.avg_wakeup = sysctl_sched_wakeup_granularity; #ifdef CONFIG_SCHEDSTATS - p->se.wait_start = 0; - p->se.sum_sleep_runtime = 0; - p->se.sleep_start = 0; - p->se.block_start = 0; - p->se.sleep_max = 0; - p->se.block_max = 0; - p->se.exec_max = 0; - p->se.slice_max = 0; - p->se.wait_max = 0; + p->se.wait_start = 0; + p->se.wait_max = 0; + p->se.wait_count = 0; + p->se.wait_sum = 0; + + p->se.sleep_start = 0; + p->se.sleep_max = 0; + p->se.sum_sleep_runtime = 0; + + p->se.block_start = 0; + p->se.block_max = 0; + p->se.exec_max = 0; + p->se.slice_max = 0; + + p->se.nr_migrations_cold = 0; + p->se.nr_failed_migrations_affine = 0; + p->se.nr_failed_migrations_running = 0; + p->se.nr_failed_migrations_hot = 0; + p->se.nr_forced_migrations = 0; + p->se.nr_forced2_migrations = 0; + + p->se.nr_wakeups = 0; + p->se.nr_wakeups_sync = 0; + p->se.nr_wakeups_migrate = 0; + p->se.nr_wakeups_local = 0; + p->se.nr_wakeups_remote = 0; + p->se.nr_wakeups_affine = 0; + p->se.nr_wakeups_affine_attempts = 0; + p->se.nr_wakeups_passive = 0; + p->se.nr_wakeups_idle = 0; + #endif INIT_LIST_HEAD(&p->rt.run_list); -- cgit v1.2.3 From c20b08e3986c2dbfa6df1e880bf4f7159994d199 Mon Sep 17 00:00:00 2001 From: Fabio Checconi Date: Mon, 15 Jun 2009 20:56:38 +0200 Subject: sched: Fix rt_rq->pushable_tasks initialization in init_rt_rq() init_rt_rq() initializes only rq->rt.pushable_tasks, and not the pushable_tasks field of the passed rt_rq. The plist is not used uninitialized since the only pushable_tasks plists used are the ones of root rt_rqs; anyway reinitializing the list on every group creation corrupts the root plist, losing its previous contents. Signed-off-by: Fabio Checconi Signed-off-by: Peter Zijlstra LKML-Reference: <20090615185638.GK21741@gandalf.sssup.it> CC: Gregory Haskins Signed-off-by: Ingo Molnar --- kernel/sched.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/kernel/sched.c b/kernel/sched.c index c4549bd7e17..efecfdad1b5 100644 --- a/kernel/sched.c +++ b/kernel/sched.c @@ -9093,7 +9093,7 @@ static void init_rt_rq(struct rt_rq *rt_rq, struct rq *rq) #ifdef CONFIG_SMP rt_rq->rt_nr_migratory = 0; rt_rq->overloaded = 0; - plist_head_init(&rq->rt.pushable_tasks, &rq->lock); + plist_head_init(&rt_rq->pushable_tasks, &rq->lock); #endif rt_rq->rt_time = 0; -- cgit v1.2.3 From 9d30937accf2c01e8b0bd59787409a7348cbbcb7 Mon Sep 17 00:00:00 2001 From: Jaroslav Kysela Date: Fri, 10 Jul 2009 12:27:31 +0200 Subject: ALSA: hda_intel: more strict alc880_parse_auto_config dig_nid checking On some IbexPeak systems with ALC889A errors like "azx_get_response timeout, switching to polling mode: last cmd=0xaf9f000b" are produced, because non-existent codec #10 is wrongly accessed. The problem is that snd_hda_get_connections() returns out-of-range result for NID 0x1c (something like 0xf8f9 or 0xffff). This patch adds a check to alc880_parse_auto_config() to avoid using of this out-of-range NIDs. A better fix maybe to improve snd_hda_get_connections() routine to check for valid NID ranges if NIDs are expected as result. Signed-off-by: Jaroslav Kysela Signed-off-by: Takashi Iwai --- sound/pci/hda/patch_realtek.c | 6 ++++++ 1 file changed, 6 insertions(+) diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c index bbb9b42e260..7e99763ca52 100644 --- a/sound/pci/hda/patch_realtek.c +++ b/sound/pci/hda/patch_realtek.c @@ -4505,6 +4505,12 @@ static int alc880_parse_auto_config(struct hda_codec *codec) &dig_nid, 1); if (err < 0) continue; + if (dig_nid > 0x7f) { + printk(KERN_ERR "alc880_auto: invalid dig_nid " + "connection 0x%x for NID 0x%x\n", dig_nid, + spec->autocfg.dig_out_pins[i]); + continue; + } if (!i) spec->multiout.dig_out_nid = dig_nid; else { -- cgit v1.2.3 From 7e0c5086c172ecf8b0c2ad860b02a586967d17d0 Mon Sep 17 00:00:00 2001 From: Thomas Gleixner Date: Thu, 9 Jul 2009 13:52:32 +0200 Subject: hrtimer: migration: do not check expiry time on current CPU The timer migration code needs to check whether the expiry time of the timer is before the programmed clock event expiry time when the timer is enqueued on another CPU because we can not reprogram the timer device on the other CPU. The current logic checks the expiry time even if we enqueue on the current CPU when nohz_get_load_balancer() returns current CPU. This might lead to an endless loop in the expiry check code when the expiry time of the timer is before the current programmed next event. Check whether nohz_get_load_balancer() returns current CPU and skip the expiry check if this is the case. The bug was triggered from the networking code. The patch fixes the regression http://bugzilla.kernel.org/show_bug.cgi?id=13738 (Soft-Lockup/Race in networking in 2.6.31-rc1+195) Cc: Arun Bharadwaj Tested-by: Andres Freund Signed-off-by: Thomas Gleixner --- kernel/hrtimer.c | 15 +++++++++++++-- 1 file changed, 13 insertions(+), 2 deletions(-) diff --git a/kernel/hrtimer.c b/kernel/hrtimer.c index 9002958a96e..126b9808f28 100644 --- a/kernel/hrtimer.c +++ b/kernel/hrtimer.c @@ -206,8 +206,19 @@ switch_hrtimer_base(struct hrtimer *timer, struct hrtimer_clock_base *base, #if defined(CONFIG_NO_HZ) && defined(CONFIG_SMP) if (!pinned && get_sysctl_timer_migration() && idle_cpu(cpu)) { preferred_cpu = get_nohz_load_balancer(); - if (preferred_cpu >= 0) - cpu = preferred_cpu; + if (preferred_cpu >= 0) { + /* + * We must not check the expiry value when + * preferred_cpu is the current cpu. If base + * != new_base we would loop forever when the + * timer expires before the current programmed + * next timer event. + */ + if (preferred_cpu != cpu) + cpu = preferred_cpu; + else + preferred_cpu = -1; + } } #endif -- cgit v1.2.3 From 65bc98b0059360e458aebd208587be44641227c1 Mon Sep 17 00:00:00 2001 From: Steve French Date: Fri, 10 Jul 2009 15:27:25 +0000 Subject: [CIFS] Distinguish posix opens and mkdirs from legacy mkdirs in stats Acked-by: Jeff Layton Signed-off-by: Steve French --- fs/cifs/cifs_debug.c | 8 +++++++- fs/cifs/cifsglob.h | 2 ++ fs/cifs/cifssmb.c | 5 ++++- 3 files changed, 13 insertions(+), 2 deletions(-) diff --git a/fs/cifs/cifs_debug.c b/fs/cifs/cifs_debug.c index 7f19fefd3d4..42cec2a7c0c 100644 --- a/fs/cifs/cifs_debug.c +++ b/fs/cifs/cifs_debug.c @@ -261,6 +261,8 @@ static ssize_t cifs_stats_proc_write(struct file *file, atomic_set(&tcon->num_reads, 0); atomic_set(&tcon->num_oplock_brks, 0); atomic_set(&tcon->num_opens, 0); + atomic_set(&tcon->num_posixopens, 0); + atomic_set(&tcon->num_posixmkdirs, 0); atomic_set(&tcon->num_closes, 0); atomic_set(&tcon->num_deletes, 0); atomic_set(&tcon->num_mkdirs, 0); @@ -347,11 +349,15 @@ static int cifs_stats_proc_show(struct seq_file *m, void *v) atomic_read(&tcon->num_locks), atomic_read(&tcon->num_hardlinks), atomic_read(&tcon->num_symlinks)); - seq_printf(m, "\nOpens: %d Closes: %d" + seq_printf(m, "\nOpens: %d Closes: %d " "Deletes: %d", atomic_read(&tcon->num_opens), atomic_read(&tcon->num_closes), atomic_read(&tcon->num_deletes)); + seq_printf(m, "\nPosix Opens: %d " + "Posix Mkdirs: %d", + atomic_read(&tcon->num_posixopens), + atomic_read(&tcon->num_posixmkdirs)); seq_printf(m, "\nMkdirs: %d Rmdirs: %d", atomic_read(&tcon->num_mkdirs), atomic_read(&tcon->num_rmdirs)); diff --git a/fs/cifs/cifsglob.h b/fs/cifs/cifsglob.h index 63f6cdfa563..6084d6379c0 100644 --- a/fs/cifs/cifsglob.h +++ b/fs/cifs/cifsglob.h @@ -260,6 +260,8 @@ struct cifsTconInfo { atomic_t num_closes; atomic_t num_deletes; atomic_t num_mkdirs; + atomic_t num_posixopens; + atomic_t num_posixmkdirs; atomic_t num_rmdirs; atomic_t num_renames; atomic_t num_t2renames; diff --git a/fs/cifs/cifssmb.c b/fs/cifs/cifssmb.c index 922f5fe2084..1866bc2927d 100644 --- a/fs/cifs/cifssmb.c +++ b/fs/cifs/cifssmb.c @@ -1113,7 +1113,10 @@ PsxCreat: psx_create_err: cifs_buf_release(pSMB); - cifs_stats_inc(&tcon->num_mkdirs); + if (posix_flags & SMB_O_DIRECTORY) + cifs_stats_inc(&tcon->num_posixmkdirs); + else + cifs_stats_inc(&tcon->num_posixopens); if (rc == -EAGAIN) goto PsxCreat; -- cgit v1.2.3 From 6ff7041dbfeb3bd7dfe9aa67275c21199ef760d6 Mon Sep 17 00:00:00 2001 From: Thomas Gleixner Date: Fri, 10 Jul 2009 14:57:05 +0200 Subject: hrtimer: Fix migration expiry check The timer migration expiry check should prevent the migration of a timer to another CPU when the timer expires before the next event is scheduled on the other CPU. Migrating the timer might delay it because we can not reprogram the clock event device on the other CPU. But the code implementing that check has two flaws: - for !HIGHRES the check compares the expiry value with the clock events device expiry value which is wrong for CLOCK_REALTIME based timers. - the check is racy. It holds the hrtimer base lock of the target CPU, but the clock event device expiry value can be modified nevertheless, e.g. by an timer interrupt firing. The !HIGHRES case is easy to fix as we can enqueue the timer on the cpu which was selected by the load balancer. It runs the idle balancing code once per jiffy anyway. So the maximum delay for the timer is the same as when we keep the tick on the current cpu going. In the HIGHRES case we can get the next expiry value from the hrtimer cpu_base of the target CPU and serialize the update with the cpu_base lock. This moves the lock section in hrtimer_interrupt() so we can set next_event to KTIME_MAX while we are handling the expired timers and set it to the next expiry value after we handled the timers under the base lock. While the expired timers are processed timer migration is blocked because the expiry time of the timer is always <= KTIME_MAX. Also remove the now useless clockevents_get_next_event() function. Signed-off-by: Thomas Gleixner --- include/linux/clockchips.h | 9 ---- kernel/hrtimer.c | 121 ++++++++++++++++++++++++--------------------- kernel/time/clockevents.c | 11 ----- 3 files changed, 64 insertions(+), 77 deletions(-) diff --git a/include/linux/clockchips.h b/include/linux/clockchips.h index 20a100fe2b4..3a1dbba4d3a 100644 --- a/include/linux/clockchips.h +++ b/include/linux/clockchips.h @@ -143,12 +143,3 @@ extern void clockevents_notify(unsigned long reason, void *arg); #endif #endif - -#ifdef CONFIG_GENERIC_CLOCKEVENTS -extern ktime_t clockevents_get_next_event(int cpu); -#else -static inline ktime_t clockevents_get_next_event(int cpu) -{ - return (ktime_t) { .tv64 = KTIME_MAX }; -} -#endif diff --git a/kernel/hrtimer.c b/kernel/hrtimer.c index 126b9808f28..49da79ab848 100644 --- a/kernel/hrtimer.c +++ b/kernel/hrtimer.c @@ -191,6 +191,46 @@ struct hrtimer_clock_base *lock_hrtimer_base(const struct hrtimer *timer, } } + +/* + * Get the preferred target CPU for NOHZ + */ +static int hrtimer_get_target(int this_cpu, int pinned) +{ +#ifdef CONFIG_NO_HZ + if (!pinned && get_sysctl_timer_migration() && idle_cpu(this_cpu)) { + int preferred_cpu = get_nohz_load_balancer(); + + if (preferred_cpu >= 0) + return preferred_cpu; + } +#endif + return this_cpu; +} + +/* + * With HIGHRES=y we do not migrate the timer when it is expiring + * before the next event on the target cpu because we cannot reprogram + * the target cpu hardware and we would cause it to fire late. + * + * Called with cpu_base->lock of target cpu held. + */ +static int +hrtimer_check_target(struct hrtimer *timer, struct hrtimer_clock_base *new_base) +{ +#ifdef CONFIG_HIGH_RES_TIMERS + ktime_t expires; + + if (!new_base->cpu_base->hres_active) + return 0; + + expires = ktime_sub(hrtimer_get_expires(timer), new_base->offset); + return expires.tv64 <= new_base->cpu_base->expires_next.tv64; +#else + return 0; +#endif +} + /* * Switch the timer base to the current CPU when possible. */ @@ -200,27 +240,8 @@ switch_hrtimer_base(struct hrtimer *timer, struct hrtimer_clock_base *base, { struct hrtimer_clock_base *new_base; struct hrtimer_cpu_base *new_cpu_base; - int cpu, preferred_cpu = -1; - - cpu = smp_processor_id(); -#if defined(CONFIG_NO_HZ) && defined(CONFIG_SMP) - if (!pinned && get_sysctl_timer_migration() && idle_cpu(cpu)) { - preferred_cpu = get_nohz_load_balancer(); - if (preferred_cpu >= 0) { - /* - * We must not check the expiry value when - * preferred_cpu is the current cpu. If base - * != new_base we would loop forever when the - * timer expires before the current programmed - * next timer event. - */ - if (preferred_cpu != cpu) - cpu = preferred_cpu; - else - preferred_cpu = -1; - } - } -#endif + int this_cpu = smp_processor_id(); + int cpu = hrtimer_get_target(this_cpu, pinned); again: new_cpu_base = &per_cpu(hrtimer_bases, cpu); @@ -228,7 +249,7 @@ again: if (base != new_base) { /* - * We are trying to schedule the timer on the local CPU. + * We are trying to move timer to new_base. * However we can't change timer's base while it is running, * so we keep it on the same CPU. No hassle vs. reprogramming * the event source in the high resolution case. The softirq @@ -244,38 +265,12 @@ again: spin_unlock(&base->cpu_base->lock); spin_lock(&new_base->cpu_base->lock); - /* Optimized away for NOHZ=n SMP=n */ - if (cpu == preferred_cpu) { - /* Calculate clock monotonic expiry time */ -#ifdef CONFIG_HIGH_RES_TIMERS - ktime_t expires = ktime_sub(hrtimer_get_expires(timer), - new_base->offset); -#else - ktime_t expires = hrtimer_get_expires(timer); -#endif - - /* - * Get the next event on target cpu from the - * clock events layer. - * This covers the highres=off nohz=on case as well. - */ - ktime_t next = clockevents_get_next_event(cpu); - - ktime_t delta = ktime_sub(expires, next); - - /* - * We do not migrate the timer when it is expiring - * before the next event on the target cpu because - * we cannot reprogram the target cpu hardware and - * we would cause it to fire late. - */ - if (delta.tv64 < 0) { - cpu = smp_processor_id(); - spin_unlock(&new_base->cpu_base->lock); - spin_lock(&base->cpu_base->lock); - timer->base = base; - goto again; - } + if (cpu != this_cpu && hrtimer_check_target(timer, new_base)) { + cpu = this_cpu; + spin_unlock(&new_base->cpu_base->lock); + spin_lock(&base->cpu_base->lock); + timer->base = base; + goto again; } timer->base = new_base; } @@ -1287,14 +1282,22 @@ void hrtimer_interrupt(struct clock_event_device *dev) expires_next.tv64 = KTIME_MAX; + spin_lock(&cpu_base->lock); + /* + * We set expires_next to KTIME_MAX here with cpu_base->lock + * held to prevent that a timer is enqueued in our queue via + * the migration code. This does not affect enqueueing of + * timers which run their callback and need to be requeued on + * this CPU. + */ + cpu_base->expires_next.tv64 = KTIME_MAX; + base = cpu_base->clock_base; for (i = 0; i < HRTIMER_MAX_CLOCK_BASES; i++) { ktime_t basenow; struct rb_node *node; - spin_lock(&cpu_base->lock); - basenow = ktime_add(now, base->offset); while ((node = base->first)) { @@ -1327,11 +1330,15 @@ void hrtimer_interrupt(struct clock_event_device *dev) __run_hrtimer(timer); } - spin_unlock(&cpu_base->lock); base++; } + /* + * Store the new expiry value so the migration code can verify + * against it. + */ cpu_base->expires_next = expires_next; + spin_unlock(&cpu_base->lock); /* Reprogramming necessary ? */ if (expires_next.tv64 != KTIME_MAX) { diff --git a/kernel/time/clockevents.c b/kernel/time/clockevents.c index 1ad6dd46111..a6dcd67b041 100644 --- a/kernel/time/clockevents.c +++ b/kernel/time/clockevents.c @@ -254,15 +254,4 @@ void clockevents_notify(unsigned long reason, void *arg) spin_unlock(&clockevents_lock); } EXPORT_SYMBOL_GPL(clockevents_notify); - -ktime_t clockevents_get_next_event(int cpu) -{ - struct tick_device *td; - struct clock_event_device *dev; - - td = &per_cpu(tick_cpu_device, cpu); - dev = td->evtdev; - - return dev->next_event; -} #endif -- cgit v1.2.3 From f9f868dbcca961ed62f1df1d114abd0c38c47dce Mon Sep 17 00:00:00 2001 From: Heiko Carstens Date: Thu, 9 Jul 2009 11:24:26 +0200 Subject: timer stats: fix quick check optimization git commit 507e1231 "timer stats: Optimize by adding quick check to avoid function calls" added one wrong check so that one unnecessary function call isn't elimated. time_stats_account_hrtimer() checks if timer->start_pid isn't initialized in order to find out if timer_stats_update_stats() should be called. However start_pid is initialized with -1 instead of 0, so that the function call always happens. Check timer->start_site like in timer_stats_account_timer() to fix this. Signed-off-by: Heiko Carstens Signed-off-by: Thomas Gleixner --- include/linux/hrtimer.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/include/linux/hrtimer.h b/include/linux/hrtimer.h index 54648e625ef..4759917adc7 100644 --- a/include/linux/hrtimer.h +++ b/include/linux/hrtimer.h @@ -448,7 +448,7 @@ extern void timer_stats_update_stats(void *timer, pid_t pid, void *startf, static inline void timer_stats_account_hrtimer(struct hrtimer *timer) { - if (likely(!timer->start_pid)) + if (likely(!timer->start_site)) return; timer_stats_update_stats(timer, timer->start_pid, timer->start_site, timer->function, timer->start_comm, 0); -- cgit v1.2.3 From 857fdc53a0a90c3ba7fcf5b1fb4c7a62ae03cf82 Mon Sep 17 00:00:00 2001 From: Yinghai Lu Date: Fri, 10 Jul 2009 09:36:20 -0700 Subject: x86/pci: insert ioapic resource before assigning unassigned resources Stephen reported that his DL585 G2 needed noapic after 2.6.22 (?) Dann bisected it down to: commit 30a18d6c3f1e774de656ebd8ff219d53e2ba4029 Date: Tue Feb 19 03:21:20 2008 -0800 x86: multi pci root bus with different io resource range, on 64-bit It turns out that: 1. that AMD-based systems have two HT chains. 2. BIOS doesn't allocate resources for BAR 6 of devices under 8132 etc 3. that multi-peer-root patch will try to split root resources to peer root resources according to PCI conf of NB 4. PCI core assigns unassigned resources, but they overlap with BARs that are used by ioapic addr of io4 and 8132. The reason: at that point ioapic address are not inserted yet. Solution is to insert ioapic resources into the tree a bit earlier. Reported-by: Stephen Frost Reported-and-Tested-by: dann frazier Signed-off-by: Yinghai Lu Cc: stable@kernel.org Signed-off-by: Jesse Barnes --- arch/x86/include/asm/io_apic.h | 2 ++ arch/x86/kernel/apic/io_apic.c | 14 +++----------- arch/x86/pci/i386.c | 7 +++++++ 3 files changed, 12 insertions(+), 11 deletions(-) diff --git a/arch/x86/include/asm/io_apic.h b/arch/x86/include/asm/io_apic.h index daf866ed061..330ee807f89 100644 --- a/arch/x86/include/asm/io_apic.h +++ b/arch/x86/include/asm/io_apic.h @@ -161,6 +161,7 @@ extern int io_apic_set_pci_routing(struct device *dev, int irq, struct io_apic_irq_attr *irq_attr); extern int (*ioapic_renumber_irq)(int ioapic, int irq); extern void ioapic_init_mappings(void); +extern void ioapic_insert_resources(void); extern struct IO_APIC_route_entry **alloc_ioapic_entries(void); extern void free_ioapic_entries(struct IO_APIC_route_entry **ioapic_entries); @@ -180,6 +181,7 @@ extern void ioapic_write_entry(int apic, int pin, #define io_apic_assign_pci_irqs 0 static const int timer_through_8259 = 0; static inline void ioapic_init_mappings(void) { } +static inline void ioapic_insert_resources(void) { } static inline void probe_nr_irqs_gsi(void) { } #endif diff --git a/arch/x86/kernel/apic/io_apic.c b/arch/x86/kernel/apic/io_apic.c index 90b5e6efa93..2284a4812b6 100644 --- a/arch/x86/kernel/apic/io_apic.c +++ b/arch/x86/kernel/apic/io_apic.c @@ -4181,28 +4181,20 @@ fake_ioapic_page: } } -static int __init ioapic_insert_resources(void) +void __init ioapic_insert_resources(void) { int i; struct resource *r = ioapic_resources; if (!r) { - if (nr_ioapics > 0) { + if (nr_ioapics > 0) printk(KERN_ERR "IO APIC resources couldn't be allocated.\n"); - return -1; - } - return 0; + return; } for (i = 0; i < nr_ioapics; i++) { insert_resource(&iomem_resource, r); r++; } - - return 0; } - -/* Insert the IO APIC resources after PCI initialization has occured to handle - * IO APICS that are mapped in on a BAR in PCI space. */ -late_initcall(ioapic_insert_resources); diff --git a/arch/x86/pci/i386.c b/arch/x86/pci/i386.c index 0fb56db16d1..52e62e57fed 100644 --- a/arch/x86/pci/i386.c +++ b/arch/x86/pci/i386.c @@ -35,6 +35,7 @@ #include #include #include +#include static int @@ -227,6 +228,12 @@ void __init pcibios_resource_survey(void) pcibios_allocate_resources(1); e820_reserve_resources_late(); + /* + * Insert the IO APIC resources after PCI initialization has + * occured to handle IO APICS that are mapped in on a BAR in + * PCI space, but before trying to assign unassigned pci res. + */ + ioapic_insert_resources(); } /** -- cgit v1.2.3 From a1a08d1cb0ab148fd74216e4c0b4d4db18fe62c6 Mon Sep 17 00:00:00 2001 From: Roland Dreier Date: Sat, 11 Jul 2009 00:10:04 -0700 Subject: x86: Remove spurious printk level from segfault message Since commit 5fd29d6c ("printk: clean up handling of log-levels and newlines"), the kernel logs segfaults like: <6>gnome-power-man[24509]: segfault at 20 ip 00007f9d4950465a sp 00007fffbb50fc70 error 4 in libgobject-2.0.so.0.2103.0[7f9d494f7000+45000] with the extra "<6>" being KERN_INFO. This happens because the printk in show_signal_msg() started with KERN_CONT and then used "%s" to pass in the real level; and KERN_CONT is no longer an empty string, and printk only pays attention to the level at the very beginning of the format string. Therefore, remove the KERN_CONT from this printk, since it is now actively causing problems (and never really made any sense). Signed-off-by: Roland Dreier Cc: Linus Torvalds LKML-Reference: <874otjitkj.fsf@shaolin.home.digitalvampire.org> Signed-off-by: Ingo Molnar --- arch/x86/mm/fault.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/x86/mm/fault.c b/arch/x86/mm/fault.c index 85307cc6e45..bfae139182f 100644 --- a/arch/x86/mm/fault.c +++ b/arch/x86/mm/fault.c @@ -697,7 +697,7 @@ show_signal_msg(struct pt_regs *regs, unsigned long error_code, if (!printk_ratelimit()) return; - printk(KERN_CONT "%s%s[%d]: segfault at %lx ip %p sp %p error %lx", + printk("%s%s[%d]: segfault at %lx ip %p sp %p error %lx", task_pid_nr(tsk) > 1 ? KERN_INFO : KERN_EMERG, tsk->comm, task_pid_nr(tsk), address, (void *)regs->ip, (void *)regs->sp, error_code); -- cgit v1.2.3 From d07387b490b1c43bfcb9f3900faf96f2dafb2630 Mon Sep 17 00:00:00 2001 From: Paul Turner Date: Fri, 10 Jul 2009 17:05:16 -0700 Subject: sched: Fix bug in SCHED_IDLE interaction with group scheduling One of the isolation modifications for SCHED_IDLE is the unitization of sleeper credit. However the check for this assumes that the sched_entity we're placing always belongs to a task. This is potentially not true with group scheduling and leaves us rummaging randomly when we try to pull the policy. Signed-off-by: Paul Turner Cc: peterz@infradead.org LKML-Reference: Signed-off-by: Ingo Molnar --- kernel/sched_fair.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/kernel/sched_fair.c b/kernel/sched_fair.c index ba7fd6e9556..7c248dc30f4 100644 --- a/kernel/sched_fair.c +++ b/kernel/sched_fair.c @@ -687,7 +687,8 @@ place_entity(struct cfs_rq *cfs_rq, struct sched_entity *se, int initial) * all of which have the same weight. */ if (sched_feat(NORMALIZED_SLEEPER) && - task_of(se)->policy != SCHED_IDLE) + (!entity_is_task(se) || + task_of(se)->policy != SCHED_IDLE)) thresh = calc_delta_fair(thresh, se); vruntime -= thresh; -- cgit v1.2.3 From 52d422de22b26d96bbdfbc605eb31c2994df6d0b Mon Sep 17 00:00:00 2001 From: Arnaldo Carvalho de Melo Date: Fri, 10 Jul 2009 22:47:28 -0300 Subject: perf report: Adjust column width to the values sampled Auto-adjust column width of perf report output to the longest occuring string length. Example: [acme@doppio pahole]$ perf report --sort comm,dso,symbol | head -13 12.79% pahole /usr/lib64/libdw-0.141.so [.] __libdw_find_attr 8.90% pahole /lib64/libc-2.10.1.so [.] _int_malloc 8.68% pahole /usr/lib64/libdw-0.141.so [.] __libdw_form_val_len 8.15% pahole /lib64/libc-2.10.1.so [.] __GI_strcmp 6.80% pahole /lib64/libc-2.10.1.so [.] __tsearch 5.54% pahole ./build/libdwarves.so.1.0.0 [.] tag__recode_dwarf_type [acme@doppio pahole]$ [acme@doppio pahole]$ perf report --sort comm,dso,symbol -d /lib64/libc-2.10.1.so | head -10 21.92% pahole /lib64/libc-2.10.1.so [.] _int_malloc 20.08% pahole /lib64/libc-2.10.1.so [.] __GI_strcmp 16.75% pahole /lib64/libc-2.10.1.so [.] __tsearch [acme@doppio pahole]$ Also add these extra options to control the new behaviour: -w, --field-width Force each column width to the provided list, for large terminal readability. -t, --field-separator: Use a special separator character and don't pad with spaces, replacing all occurances of this separator in symbol names (and other output) with a '.' character, that thus it's the only non valid separator. Signed-off-by: Arnaldo Carvalho de Melo Cc: Frederic Weisbecker Cc: Mike Galbraith Cc: Peter Zijlstra Cc: Paul Mackerras LKML-Reference: <20090711014728.GH3452@ghostprotocols.net> Signed-off-by: Ingo Molnar --- tools/perf/Documentation/perf-report.txt | 12 +++ tools/perf/builtin-report.c | 174 +++++++++++++++++++++++++------ tools/perf/util/include/linux/kernel.h | 8 ++ tools/perf/util/symbol.c | 1 + tools/perf/util/symbol.h | 1 + 5 files changed, 164 insertions(+), 32 deletions(-) diff --git a/tools/perf/Documentation/perf-report.txt b/tools/perf/Documentation/perf-report.txt index 8aa3f8c8870..05774dfbd14 100644 --- a/tools/perf/Documentation/perf-report.txt +++ b/tools/perf/Documentation/perf-report.txt @@ -33,6 +33,18 @@ OPTIONS Only consider these symbols. CSV that understands file://filename entries. +-w:: +--field-width=:: + Force each column width to the provided list, for large terminal + readability. + +-t:: +--field-separator=:: + + Use a special separator character and don't pad with spaces, replacing + all occurances of this separator in symbol names (and other output) + with a '.' character, that thus it's the only non valid separator. + SEE ALSO -------- linkperf:perf-stat[1] diff --git a/tools/perf/builtin-report.c b/tools/perf/builtin-report.c index 4e5cc266311..740da43f313 100644 --- a/tools/perf/builtin-report.c +++ b/tools/perf/builtin-report.c @@ -33,8 +33,10 @@ static char *vmlinux = NULL; static char default_sort_order[] = "comm,dso"; static char *sort_order = default_sort_order; -static char *dso_list_str, *comm_list_str, *sym_list_str; +static char *dso_list_str, *comm_list_str, *sym_list_str, + *col_width_list_str; static struct strlist *dso_list, *comm_list, *sym_list; +static char *field_sep; static int input; static int show_mask = SHOW_KERNEL | SHOW_USER | SHOW_HV; @@ -129,6 +131,33 @@ typedef union event_union { struct read_event read; } event_t; +static int repsep_fprintf(FILE *fp, const char *fmt, ...) +{ + int n; + va_list ap; + + va_start(ap, fmt); + if (!field_sep) + n = vfprintf(fp, fmt, ap); + else { + char *bf = NULL; + n = vasprintf(&bf, fmt, ap); + if (n > 0) { + char *sep = bf; + while (1) { + sep = strchr(sep, *field_sep); + if (sep == NULL) + break; + *sep = '.'; + } + } + fputs(bf, fp); + free(bf); + } + va_end(ap); + return n; +} + static LIST_HEAD(dsos); static struct dso *kernel_dso; static struct dso *vdso; @@ -360,12 +389,28 @@ static struct thread *thread__new(pid_t pid) return self; } +static unsigned int dsos__col_width, + comms__col_width, + threads__col_width; + static int thread__set_comm(struct thread *self, const char *comm) { if (self->comm) free(self->comm); self->comm = strdup(comm); - return self->comm ? 0 : -ENOMEM; + if (!self->comm) + return -ENOMEM; + + if (!col_width_list_str && !field_sep && + (!comm_list || strlist__has_entry(comm_list, comm))) { + unsigned int slen = strlen(comm); + if (slen > comms__col_width) { + comms__col_width = slen; + threads__col_width = slen + 6; + } + } + + return 0; } static size_t thread__fprintf(struct thread *self, FILE *fp) @@ -536,7 +581,8 @@ struct sort_entry { int64_t (*cmp)(struct hist_entry *, struct hist_entry *); int64_t (*collapse)(struct hist_entry *, struct hist_entry *); - size_t (*print)(FILE *fp, struct hist_entry *); + size_t (*print)(FILE *fp, struct hist_entry *, unsigned int width); + unsigned int *width; }; static int64_t cmp_null(void *l, void *r) @@ -558,15 +604,17 @@ sort__thread_cmp(struct hist_entry *left, struct hist_entry *right) } static size_t -sort__thread_print(FILE *fp, struct hist_entry *self) +sort__thread_print(FILE *fp, struct hist_entry *self, unsigned int width) { - return fprintf(fp, "%16s:%5d", self->thread->comm ?: "", self->thread->pid); + return repsep_fprintf(fp, "%*s:%5d", width - 6, + self->thread->comm ?: "", self->thread->pid); } static struct sort_entry sort_thread = { - .header = " Command: Pid", + .header = "Command: Pid", .cmp = sort__thread_cmp, .print = sort__thread_print, + .width = &threads__col_width, }; /* --sort comm */ @@ -590,16 +638,17 @@ sort__comm_collapse(struct hist_entry *left, struct hist_entry *right) } static size_t -sort__comm_print(FILE *fp, struct hist_entry *self) +sort__comm_print(FILE *fp, struct hist_entry *self, unsigned int width) { - return fprintf(fp, "%16s", self->thread->comm); + return repsep_fprintf(fp, "%*s", width, self->thread->comm); } static struct sort_entry sort_comm = { - .header = " Command", + .header = "Command", .cmp = sort__comm_cmp, .collapse = sort__comm_collapse, .print = sort__comm_print, + .width = &comms__col_width, }; /* --sort dso */ @@ -617,18 +666,19 @@ sort__dso_cmp(struct hist_entry *left, struct hist_entry *right) } static size_t -sort__dso_print(FILE *fp, struct hist_entry *self) +sort__dso_print(FILE *fp, struct hist_entry *self, unsigned int width) { if (self->dso) - return fprintf(fp, "%-25s", self->dso->name); + return repsep_fprintf(fp, "%-*s", width, self->dso->name); - return fprintf(fp, "%016llx ", (u64)self->ip); + return repsep_fprintf(fp, "%*llx", width, (u64)self->ip); } static struct sort_entry sort_dso = { - .header = "Shared Object ", + .header = "Shared Object", .cmp = sort__dso_cmp, .print = sort__dso_print, + .width = &dsos__col_width, }; /* --sort symbol */ @@ -648,22 +698,23 @@ sort__sym_cmp(struct hist_entry *left, struct hist_entry *right) } static size_t -sort__sym_print(FILE *fp, struct hist_entry *self) +sort__sym_print(FILE *fp, struct hist_entry *self, unsigned int width __used) { size_t ret = 0; if (verbose) - ret += fprintf(fp, "%#018llx ", (u64)self->ip); + ret += repsep_fprintf(fp, "%#018llx ", (u64)self->ip); if (self->sym) { - ret += fprintf(fp, "[%c] %s", + ret += repsep_fprintf(fp, "[%c] %s", self->dso == kernel_dso ? 'k' : self->dso == hypervisor_dso ? 'h' : '.', self->sym->name); if (self->sym->module) - ret += fprintf(fp, "\t[%s]", self->sym->module->name); + ret += repsep_fprintf(fp, "\t[%s]", + self->sym->module->name); } else { - ret += fprintf(fp, "%#016llx", (u64)self->ip); + ret += repsep_fprintf(fp, "%#016llx", (u64)self->ip); } return ret; @@ -690,19 +741,19 @@ sort__parent_cmp(struct hist_entry *left, struct hist_entry *right) } static size_t -sort__parent_print(FILE *fp, struct hist_entry *self) +sort__parent_print(FILE *fp, struct hist_entry *self, unsigned int width) { - size_t ret = 0; - - ret += fprintf(fp, "%-20s", self->parent ? self->parent->name : "[other]"); - - return ret; + return repsep_fprintf(fp, "%-*s", width, + self->parent ? self->parent->name : "[other]"); } +static unsigned int parent_symbol__col_width; + static struct sort_entry sort_parent = { - .header = "Parent symbol ", + .header = "Parent symbol", .cmp = sort__parent_cmp, .print = sort__parent_print, + .width = &parent_symbol__col_width, }; static int sort__need_collapse = 0; @@ -967,17 +1018,18 @@ hist_entry__fprintf(FILE *fp, struct hist_entry *self, u64 total_samples) return 0; if (total_samples) - ret = percent_color_fprintf(fp, " %6.2f%%", - (self->count * 100.0) / total_samples); + ret = percent_color_fprintf(fp, + field_sep ? "%.2f" : " %6.2f%%", + (self->count * 100.0) / total_samples); else - ret = fprintf(fp, "%12Ld ", self->count); + ret = fprintf(fp, field_sep ? "%lld" : "%12lld ", self->count); list_for_each_entry(se, &hist_entry__sort_list, list) { if (exclude_other && (se == &sort_parent)) continue; - fprintf(fp, " "); - ret += se->print(fp, self); + fprintf(fp, "%s", field_sep ?: " "); + ret += se->print(fp, self, se->width ? *se->width : 0); } ret += fprintf(fp, "\n"); @@ -992,6 +1044,18 @@ hist_entry__fprintf(FILE *fp, struct hist_entry *self, u64 total_samples) * */ +static void dso__calc_col_width(struct dso *self) +{ + if (!col_width_list_str && !field_sep && + (!dso_list || strlist__has_entry(dso_list, self->name))) { + unsigned int slen = strlen(self->name); + if (slen > dsos__col_width) + dsos__col_width = slen; + } + + self->slen_calculated = 1; +} + static struct symbol * resolve_symbol(struct thread *thread, struct map **mapp, struct dso **dsop, u64 *ipp) @@ -1011,6 +1075,14 @@ resolve_symbol(struct thread *thread, struct map **mapp, map = thread__find_map(thread, ip); if (map != NULL) { + /* + * We have to do this here as we may have a dso + * with no symbol hit that has a name longer than + * the ones with symbols sampled. + */ + if (!map->dso->slen_calculated) + dso__calc_col_width(map->dso); + if (mapp) *mapp = map; got_map: @@ -1282,6 +1354,8 @@ static size_t output__fprintf(FILE *fp, u64 total_samples) struct sort_entry *se; struct rb_node *nd; size_t ret = 0; + unsigned int width; + char *col_width = col_width_list_str; fprintf(fp, "\n"); fprintf(fp, "#\n"); @@ -1292,10 +1366,29 @@ static size_t output__fprintf(FILE *fp, u64 total_samples) list_for_each_entry(se, &hist_entry__sort_list, list) { if (exclude_other && (se == &sort_parent)) continue; - fprintf(fp, " %s", se->header); + if (field_sep) { + fprintf(fp, "%c%s", *field_sep, se->header); + continue; + } + width = strlen(se->header); + if (se->width) { + if (col_width_list_str) { + if (col_width) { + *se->width = atoi(col_width); + col_width = strchr(col_width, ','); + if (col_width) + ++col_width; + } + } + width = *se->width = max(*se->width, width); + } + fprintf(fp, " %*s", width, se->header); } fprintf(fp, "\n"); + if (field_sep) + goto print_entries; + fprintf(fp, "# ........"); list_for_each_entry(se, &hist_entry__sort_list, list) { unsigned int i; @@ -1304,13 +1397,18 @@ static size_t output__fprintf(FILE *fp, u64 total_samples) continue; fprintf(fp, " "); - for (i = 0; i < strlen(se->header); i++) + if (se->width) + width = *se->width; + else + width = strlen(se->header); + for (i = 0; i < width; i++) fprintf(fp, "."); } fprintf(fp, "\n"); fprintf(fp, "#\n"); +print_entries: for (nd = rb_first(&output_hists); nd; nd = rb_next(nd)) { pos = rb_entry(nd, struct hist_entry, rb_node); ret += hist_entry__fprintf(fp, pos, total_samples); @@ -1900,6 +1998,12 @@ static const struct option options[] = { "only consider symbols in these comms"), OPT_STRING('S', "symbols", &sym_list_str, "symbol[,symbol...]", "only consider these symbols"), + OPT_STRING('w', "column-widths", &col_width_list_str, + "width[,width...]", + "don't try to adjust column width, use these fixed values"), + OPT_STRING('t', "field-separator", &field_sep, "separator", + "separator for columns, no spaces will be added between " + "columns '.' is reserved."), OPT_END() }; @@ -1956,6 +2060,12 @@ int cmd_report(int argc, const char **argv, const char *prefix __used) setup_list(&comm_list, comm_list_str, "comm"); setup_list(&sym_list, sym_list_str, "symbol"); + if (field_sep && *field_sep == '.') { + fputs("'.' is the only non valid --field-separator argument\n", + stderr); + exit(129); + } + setup_pager(); return __cmd_report(); diff --git a/tools/perf/util/include/linux/kernel.h b/tools/perf/util/include/linux/kernel.h index 99c1b3d1edd..a6b87390cb5 100644 --- a/tools/perf/util/include/linux/kernel.h +++ b/tools/perf/util/include/linux/kernel.h @@ -18,4 +18,12 @@ (type *)((char *)__mptr - offsetof(type, member)); }) #endif +#ifndef max +#define max(x, y) ({ \ + typeof(x) _max1 = (x); \ + typeof(y) _max2 = (y); \ + (void) (&_max1 == &_max2); \ + _max1 > _max2 ? _max1 : _max2; }) +#endif + #endif diff --git a/tools/perf/util/symbol.c b/tools/perf/util/symbol.c index 4683b67b5ee..8efe7e41109 100644 --- a/tools/perf/util/symbol.c +++ b/tools/perf/util/symbol.c @@ -65,6 +65,7 @@ struct dso *dso__new(const char *name, unsigned int sym_priv_size) self->syms = RB_ROOT; self->sym_priv_size = sym_priv_size; self->find_symbol = dso__find_symbol; + self->slen_calculated = 0; } return self; diff --git a/tools/perf/util/symbol.h b/tools/perf/util/symbol.h index 7918cffb23c..2f92b21c712 100644 --- a/tools/perf/util/symbol.h +++ b/tools/perf/util/symbol.h @@ -25,6 +25,7 @@ struct dso { struct symbol *(*find_symbol)(struct dso *, u64 ip); unsigned int sym_priv_size; unsigned char adjust_symbols; + unsigned char slen_calculated; char name[0]; }; -- cgit v1.2.3 From ce2ae53b750abfaa012ce408e93da131a5b5649b Mon Sep 17 00:00:00 2001 From: Sonny Rao Date: Fri, 10 Jul 2009 18:13:13 -0500 Subject: futexes: Fix infinite loop in get_futex_key() on huge page get_futex_key() can infinitely loop if it is called on a virtual address that is within a huge page but not aligned to the beginning of that page. The call to get_user_pages_fast will return the struct page for a sub-page within the huge page and the check for page->mapping will always fail. The fix is to call compound_head on the page before checking that it's mapped. Signed-off-by: Sonny Rao Acked-by: Thomas Gleixner Cc: stable@kernel.org Cc: anton@samba.org Cc: rajamony@us.ibm.com Cc: speight@us.ibm.com Cc: mstephen@us.ibm.com Cc: grimm@us.ibm.com Cc: mikey@ozlabs.au.ibm.com LKML-Reference: <20090710231313.GA23572@us.ibm.com> Signed-off-by: Ingo Molnar --- kernel/futex.c | 1 + 1 file changed, 1 insertion(+) diff --git a/kernel/futex.c b/kernel/futex.c index 794c862125f..0672ff88f15 100644 --- a/kernel/futex.c +++ b/kernel/futex.c @@ -247,6 +247,7 @@ again: if (err < 0) return err; + page = compound_head(page); lock_page(page); if (!page->mapping) { unlock_page(page); -- cgit v1.2.3 From 025dc740d01f99ccba945df1f9ef9e06b1c15d96 Mon Sep 17 00:00:00 2001 From: Jiri Slaby Date: Sat, 11 Jul 2009 13:42:37 +0200 Subject: hwmon: (max6650) Fix lock imbalance Add omitted update_lock to one switch/case in set_div. Signed-off-by: Jiri Slaby Acked-by: Hans J. Koch Signed-off-by: Jean Delvare --- drivers/hwmon/max6650.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/hwmon/max6650.c b/drivers/hwmon/max6650.c index 86142a85823..58f66be61b1 100644 --- a/drivers/hwmon/max6650.c +++ b/drivers/hwmon/max6650.c @@ -418,6 +418,7 @@ static ssize_t set_div(struct device *dev, struct device_attribute *devattr, data->count = 3; break; default: + mutex_unlock(&data->update_lock); dev_err(&client->dev, "illegal value for fan divider (%d)\n", div); return -EINVAL; -- cgit v1.2.3 From 24205e0850dd8a79c597e366daafdd5f31a24656 Mon Sep 17 00:00:00 2001 From: Joe Perches Date: Sat, 11 Jul 2009 13:42:37 +0200 Subject: hwmon: (sht15) Remove unnecessary semicolon Signed-off-by: Joe Perches Signed-off-by: Jean Delvare --- drivers/hwmon/sht15.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/hwmon/sht15.c b/drivers/hwmon/sht15.c index 56cd6004da3..6290a259456 100644 --- a/drivers/hwmon/sht15.c +++ b/drivers/hwmon/sht15.c @@ -257,7 +257,7 @@ static inline int sht15_update_single_val(struct sht15_data *data, (data->flag == SHT15_READING_NOTHING), msecs_to_jiffies(timeout_msecs)); if (ret == 0) {/* timeout occurred */ - disable_irq_nosync(gpio_to_irq(data->pdata->gpio_data));; + disable_irq_nosync(gpio_to_irq(data->pdata->gpio_data)); sht15_connection_reset(data); return -ETIME; } -- cgit v1.2.3 From ec05a8d75d0777cd221f61a88437a31e4cfb83d8 Mon Sep 17 00:00:00 2001 From: Alistair John Strachan Date: Sat, 11 Jul 2009 13:42:38 +0200 Subject: hwmon: (abituguru3) DMI probing for AB9, AB9 QuadQT and IX38 QuadGT Switch the AB9, AB9 QuadQT and IX38 QuadGT over from port probing to the preferred DMI probe method. Signed-off-by: Alistair John Strachan Tested-by: dan Tested-by: Nygel Lyndley Tested-by: Dmitriy Fedchenko Acked-by: Hans de Goede Signed-off-by: Jean Delvare --- drivers/hwmon/abituguru3.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/drivers/hwmon/abituguru3.c b/drivers/hwmon/abituguru3.c index ad2b3431b72..7d3f15d32fd 100644 --- a/drivers/hwmon/abituguru3.c +++ b/drivers/hwmon/abituguru3.c @@ -357,7 +357,7 @@ static const struct abituguru3_motherboard_info abituguru3_motherboards[] = { { "AUX5 Fan", 39, 2, 60, 1, 0 }, { NULL, 0, 0, 0, 0, 0 } } }, - { 0x0014, NULL /* Abit AB9 Pro, need DMI string */, { + { 0x0014, "AB9", /* + AB9 Pro */ { { "CPU Core", 0, 0, 10, 1, 0 }, { "DDR", 1, 0, 10, 1, 0 }, { "DDR VTT", 2, 0, 10, 1, 0 }, @@ -455,7 +455,7 @@ static const struct abituguru3_motherboard_info abituguru3_motherboards[] = { { "AUX3 FAN", 37, 2, 60, 1, 0 }, { NULL, 0, 0, 0, 0, 0 } } }, - { 0x0018, NULL /* Unknown, need DMI string */, { + { 0x0018, "AB9 QuadGT", { { "CPU Core", 0, 0, 10, 1, 0 }, { "DDR2", 1, 0, 20, 1, 0 }, { "DDR2 VTT", 2, 0, 10, 1, 0 }, @@ -564,7 +564,7 @@ static const struct abituguru3_motherboard_info abituguru3_motherboards[] = { { "AUX3 Fan", 36, 2, 60, 1, 0 }, { NULL, 0, 0, 0, 0, 0 } } }, - { 0x001C, NULL /* Unknown, need DMI string */, { + { 0x001C, "IX38 QuadGT", { { "CPU Core", 0, 0, 10, 1, 0 }, { "DDR2", 1, 0, 20, 1, 0 }, { "DDR2 VTT", 2, 0, 10, 1, 0 }, -- cgit v1.2.3 From 60c1baf1248e00d423604f018c8af1cf750ad885 Mon Sep 17 00:00:00 2001 From: Arnaldo Carvalho de Melo Date: Sat, 11 Jul 2009 12:18:33 -0300 Subject: perf report: Tidy up reporting of symbols not found Always printing the level info about if it is in the kernel, hypervisor or userspace as that is in the hist_entry. Signed-off-by: Arnaldo Carvalho de Melo LKML-Reference: <1247325517-12272-1-git-send-email-acme@redhat.com> Signed-off-by: Ingo Molnar --- tools/perf/builtin-report.c | 5 ++--- 1 file changed, 2 insertions(+), 3 deletions(-) diff --git a/tools/perf/builtin-report.c b/tools/perf/builtin-report.c index 740da43f313..617f4cb7f16 100644 --- a/tools/perf/builtin-report.c +++ b/tools/perf/builtin-report.c @@ -705,10 +705,9 @@ sort__sym_print(FILE *fp, struct hist_entry *self, unsigned int width __used) if (verbose) ret += repsep_fprintf(fp, "%#018llx ", (u64)self->ip); + ret += repsep_fprintf(fp, "[%c] ", self->level); if (self->sym) { - ret += repsep_fprintf(fp, "[%c] %s", - self->dso == kernel_dso ? 'k' : - self->dso == hypervisor_dso ? 'h' : '.', self->sym->name); + ret += repsep_fprintf(fp, "%s", self->sym->name); if (self->sym->module) ret += repsep_fprintf(fp, "\t[%s]", -- cgit v1.2.3 From 27d0fd410c3cee00ece2e55f4354a7a9ec1a6a6a Mon Sep 17 00:00:00 2001 From: Arnaldo Carvalho de Melo Date: Sat, 11 Jul 2009 12:18:34 -0300 Subject: strlist: Introduce strlist__entry and strlist__nr_entries methods The strlist__entry method allows accessing strlists like an array, will be used in the 'perf report' to access the first entry. We now keep the nr_entries so that we can check if we have just one entry, will be used in 'perf report' to improve the output by showing just at the top when we have just, say, one DSO. While at it use nr_entries to optimize strlist__is_empty by not using the far more costly rb_first based implementation. Signed-off-by: Arnaldo Carvalho de Melo LKML-Reference: <1247325517-12272-2-git-send-email-acme@redhat.com> Signed-off-by: Ingo Molnar --- tools/perf/util/strlist.c | 20 ++++++++++++++++++-- tools/perf/util/strlist.h | 11 +++++++++-- 2 files changed, 27 insertions(+), 4 deletions(-) diff --git a/tools/perf/util/strlist.c b/tools/perf/util/strlist.c index 025a78edfff..7ad38171dc2 100644 --- a/tools/perf/util/strlist.c +++ b/tools/perf/util/strlist.c @@ -64,6 +64,7 @@ int strlist__add(struct strlist *self, const char *new_entry) rb_link_node(&sn->rb_node, parent, p); rb_insert_color(&sn->rb_node, &self->entries); + ++self->nr_entries; return 0; } @@ -155,8 +156,9 @@ struct strlist *strlist__new(bool dupstr, const char *slist) struct strlist *self = malloc(sizeof(*self)); if (self != NULL) { - self->entries = RB_ROOT; - self->dupstr = dupstr; + self->entries = RB_ROOT; + self->dupstr = dupstr; + self->nr_entries = 0; if (slist && strlist__parse_list(self, slist) != 0) goto out_error; } @@ -182,3 +184,17 @@ void strlist__delete(struct strlist *self) free(self); } } + +struct str_node *strlist__entry(const struct strlist *self, unsigned int idx) +{ + struct rb_node *nd; + + for (nd = rb_first(&self->entries); nd; nd = rb_next(nd)) { + struct str_node *pos = rb_entry(nd, struct str_node, rb_node); + + if (!idx--) + return pos; + } + + return NULL; +} diff --git a/tools/perf/util/strlist.h b/tools/perf/util/strlist.h index 2fdcfee8758..921818e44a5 100644 --- a/tools/perf/util/strlist.h +++ b/tools/perf/util/strlist.h @@ -11,7 +11,8 @@ struct str_node { struct strlist { struct rb_root entries; - bool dupstr; + unsigned int nr_entries; + bool dupstr; }; struct strlist *strlist__new(bool dupstr, const char *slist); @@ -21,11 +22,17 @@ void strlist__remove(struct strlist *self, struct str_node *sn); int strlist__load(struct strlist *self, const char *filename); int strlist__add(struct strlist *self, const char *str); +struct str_node *strlist__entry(const struct strlist *self, unsigned int idx); bool strlist__has_entry(struct strlist *self, const char *entry); static inline bool strlist__empty(const struct strlist *self) { - return rb_first(&self->entries) == NULL; + return self->nr_entries == 0; +} + +static inline unsigned int strlist__nr_entries(const struct strlist *self) +{ + return self->nr_entries; } int strlist__parse_list(struct strlist *self, const char *s); -- cgit v1.2.3 From 021191b35cdfb1b5ee6e78ed5ae010114a40902c Mon Sep 17 00:00:00 2001 From: Arnaldo Carvalho de Melo Date: Sat, 11 Jul 2009 12:18:35 -0300 Subject: perf report: Make the output more compact When we filter by column content we may end up with a column that has the same value for all the lines. So remove that column and tell its unique value on the top, as a comment. Example: [acme@doppio pahole]$ perf report --sort comm,dso,symbol -d ./build/libdwarves.so.1.0.0 -C pahole | head -15 # dso: ./build/libdwarves.so.1.0.0 # comm: pahole # Samples: 58409 # # Overhead Symbol # ........ ...... # 20.93% [.] tag__recode_dwarf_type 14.94% [.] namespace__recode_dwarf_types 10.38% [.] cu__table_add_tag 6.69% [.] __die__process_tag 5.05% [.] die__process_function 4.70% [.] list__for_all_tags 3.68% [.] tag__init 3.48% [.] die__create_new_parameter [acme@doppio pahole]$ Signed-off-by: Arnaldo Carvalho de Melo LKML-Reference: <1247325517-12272-3-git-send-email-acme@redhat.com> Signed-off-by: Ingo Molnar --- tools/perf/builtin-report.c | 36 +++++++++++++++++++++--------------- 1 file changed, 21 insertions(+), 15 deletions(-) diff --git a/tools/perf/builtin-report.c b/tools/perf/builtin-report.c index 617f4cb7f16..f3422121d85 100644 --- a/tools/perf/builtin-report.c +++ b/tools/perf/builtin-report.c @@ -583,6 +583,7 @@ struct sort_entry { int64_t (*collapse)(struct hist_entry *, struct hist_entry *); size_t (*print)(FILE *fp, struct hist_entry *, unsigned int width); unsigned int *width; + bool elide; }; static int64_t cmp_null(void *l, void *r) @@ -1024,7 +1025,7 @@ hist_entry__fprintf(FILE *fp, struct hist_entry *self, u64 total_samples) ret = fprintf(fp, field_sep ? "%lld" : "%12lld ", self->count); list_for_each_entry(se, &hist_entry__sort_list, list) { - if (exclude_other && (se == &sort_parent)) + if (se->elide) continue; fprintf(fp, "%s", field_sep ?: " "); @@ -1079,7 +1080,7 @@ resolve_symbol(struct thread *thread, struct map **mapp, * with no symbol hit that has a name longer than * the ones with symbols sampled. */ - if (!map->dso->slen_calculated) + if (!sort_dso.elide && !map->dso->slen_calculated) dso__calc_col_width(map->dso); if (mapp) @@ -1356,14 +1357,12 @@ static size_t output__fprintf(FILE *fp, u64 total_samples) unsigned int width; char *col_width = col_width_list_str; - fprintf(fp, "\n"); - fprintf(fp, "#\n"); - fprintf(fp, "# (%Ld samples)\n", (u64)total_samples); + fprintf(fp, "# Samples: %Ld\n", (u64)total_samples); fprintf(fp, "#\n"); fprintf(fp, "# Overhead"); list_for_each_entry(se, &hist_entry__sort_list, list) { - if (exclude_other && (se == &sort_parent)) + if (se->elide) continue; if (field_sep) { fprintf(fp, "%c%s", *field_sep, se->header); @@ -1392,7 +1391,7 @@ static size_t output__fprintf(FILE *fp, u64 total_samples) list_for_each_entry(se, &hist_entry__sort_list, list) { unsigned int i; - if (exclude_other && (se == &sort_parent)) + if (se->elide) continue; fprintf(fp, " "); @@ -2022,7 +2021,8 @@ static void setup_sorting(void) } static void setup_list(struct strlist **list, const char *list_str, - const char *list_name) + struct sort_entry *se, const char *list_name, + FILE *fp) { if (list_str) { *list = strlist__new(true, list_str); @@ -2031,6 +2031,11 @@ static void setup_list(struct strlist **list, const char *list_str, list_name); exit(129); } + if (strlist__nr_entries(*list) == 1) { + fprintf(fp, "# %s: %s\n", list_name, + strlist__entry(*list, 0)->s); + se->elide = true; + } } } @@ -2044,9 +2049,10 @@ int cmd_report(int argc, const char **argv, const char *prefix __used) setup_sorting(); - if (parent_pattern != default_parent_pattern) + if (parent_pattern != default_parent_pattern) { sort_dimension__add("parent"); - else + sort_parent.elide = 1; + } else exclude_other = 0; /* @@ -2055,9 +2061,11 @@ int cmd_report(int argc, const char **argv, const char *prefix __used) if (argc) usage_with_options(report_usage, options); - setup_list(&dso_list, dso_list_str, "dso"); - setup_list(&comm_list, comm_list_str, "comm"); - setup_list(&sym_list, sym_list_str, "symbol"); + setup_pager(); + + setup_list(&dso_list, dso_list_str, &sort_dso, "dso", stdout); + setup_list(&comm_list, comm_list_str, &sort_comm, "comm", stdout); + setup_list(&sym_list, sym_list_str, &sort_sym, "symbol", stdout); if (field_sep && *field_sep == '.') { fputs("'.' is the only non valid --field-separator argument\n", @@ -2065,7 +2073,5 @@ int cmd_report(int argc, const char **argv, const char *prefix __used) exit(129); } - setup_pager(); - return __cmd_report(); } -- cgit v1.2.3 From a25e46c46311316cd1b3f27f8bb036df1693c032 Mon Sep 17 00:00:00 2001 From: Arnaldo Carvalho de Melo Date: Sat, 11 Jul 2009 12:18:36 -0300 Subject: perf_counter tools: PLT info is stripped in -debuginfo packages So we need to get the richer .symtab from the debuginfo packages but the PLT info from the original DSO where we have just the leaner .dynsym symtab. Example: | [acme@doppio pahole]$ perf report --sort comm,dso,symbol > before | [acme@doppio pahole]$ perf report --sort comm,dso,symbol > after | [acme@doppio pahole]$ diff -U1 before after | --- before 2009-07-11 11:04:22.688595741 -0300 | +++ after 2009-07-11 11:04:33.380595676 -0300 | @@ -80,3 +80,2 @@ | 0.07% pahole ./build/pahole [.] pahole_stealer | - 0.06% pahole /usr/lib64/libdw-0.141.so [.] 0x00000000007140 | 0.06% pahole /usr/lib64/libdw-0.141.so [.] __libdw_getabbrev | @@ -91,2 +90,3 @@ | 0.06% pahole [kernel] [k] free_hot_cold_page | + 0.06% pahole /usr/lib64/libdw-0.141.so [.] tfind@plt | 0.05% pahole ./build/libdwarves.so.1.0.0 [.] ftype__add_parameter | @@ -242,2 +242,3 @@ | 0.01% pahole [kernel] [k] account_group_user_time | + 0.01% pahole /usr/lib64/libdw-0.141.so [.] strlen@plt | 0.01% pahole ./build/pahole [.] strcmp@plt | [acme@doppio pahole]$ Signed-off-by: Arnaldo Carvalho de Melo LKML-Reference: <1247325517-12272-4-git-send-email-acme@redhat.com> Signed-off-by: Ingo Molnar --- tools/perf/util/symbol.c | 116 ++++++++++++++++++++++++++--------------------- 1 file changed, 65 insertions(+), 51 deletions(-) diff --git a/tools/perf/util/symbol.c b/tools/perf/util/symbol.c index 8efe7e41109..f40266b4845 100644 --- a/tools/perf/util/symbol.c +++ b/tools/perf/util/symbol.c @@ -374,36 +374,61 @@ static Elf_Scn *elf_section_by_name(Elf *elf, GElf_Ehdr *ep, idx < nr_entries; \ ++idx, pos = gelf_getrela(reldata, idx, &pos_mem)) -static int dso__synthesize_plt_symbols(struct dso *self, Elf *elf, - GElf_Ehdr *ehdr, Elf_Scn *scn_dynsym, - GElf_Shdr *shdr_dynsym, - size_t dynsym_idx, int verbose) +/* + * We need to check if we have a .dynsym, so that we can handle the + * .plt, synthesizing its symbols, that aren't on the symtabs (be it + * .dynsym or .symtab). + * And always look at the original dso, not at debuginfo packages, that + * have the PLT data stripped out (shdr_rel_plt.sh_type == SHT_NOBITS). + */ +static int dso__synthesize_plt_symbols(struct dso *self, int verbose) { uint32_t nr_rel_entries, idx; GElf_Sym sym; u64 plt_offset; GElf_Shdr shdr_plt; struct symbol *f; - GElf_Shdr shdr_rel_plt; + GElf_Shdr shdr_rel_plt, shdr_dynsym; Elf_Data *reldata, *syms, *symstrs; - Elf_Scn *scn_plt_rel, *scn_symstrs; + Elf_Scn *scn_plt_rel, *scn_symstrs, *scn_dynsym; + size_t dynsym_idx; + GElf_Ehdr ehdr; char sympltname[1024]; - int nr = 0, symidx; + Elf *elf; + int nr = 0, symidx, fd, err = 0; + + fd = open(self->name, O_RDONLY); + if (fd < 0) + goto out; + + elf = elf_begin(fd, ELF_C_READ_MMAP, NULL); + if (elf == NULL) + goto out_close; + + if (gelf_getehdr(elf, &ehdr) == NULL) + goto out_elf_end; + + scn_dynsym = elf_section_by_name(elf, &ehdr, &shdr_dynsym, + ".dynsym", &dynsym_idx); + if (scn_dynsym == NULL) + goto out_elf_end; - scn_plt_rel = elf_section_by_name(elf, ehdr, &shdr_rel_plt, + scn_plt_rel = elf_section_by_name(elf, &ehdr, &shdr_rel_plt, ".rela.plt", NULL); if (scn_plt_rel == NULL) { - scn_plt_rel = elf_section_by_name(elf, ehdr, &shdr_rel_plt, + scn_plt_rel = elf_section_by_name(elf, &ehdr, &shdr_rel_plt, ".rel.plt", NULL); if (scn_plt_rel == NULL) - return 0; + goto out_elf_end; } + err = -1; + if (shdr_rel_plt.sh_link != dynsym_idx) - return 0; + goto out_elf_end; - if (elf_section_by_name(elf, ehdr, &shdr_plt, ".plt", NULL) == NULL) - return 0; + if (elf_section_by_name(elf, &ehdr, &shdr_plt, ".plt", NULL) == NULL) + goto out_elf_end; /* * Fetch the relocation section to find the indexes to the GOT @@ -411,19 +436,19 @@ static int dso__synthesize_plt_symbols(struct dso *self, Elf *elf, */ reldata = elf_getdata(scn_plt_rel, NULL); if (reldata == NULL) - return -1; + goto out_elf_end; syms = elf_getdata(scn_dynsym, NULL); if (syms == NULL) - return -1; + goto out_elf_end; - scn_symstrs = elf_getscn(elf, shdr_dynsym->sh_link); + scn_symstrs = elf_getscn(elf, shdr_dynsym.sh_link); if (scn_symstrs == NULL) - return -1; + goto out_elf_end; symstrs = elf_getdata(scn_symstrs, NULL); if (symstrs == NULL) - return -1; + goto out_elf_end; nr_rel_entries = shdr_rel_plt.sh_size / shdr_rel_plt.sh_entsize; plt_offset = shdr_plt.sh_offset; @@ -442,7 +467,7 @@ static int dso__synthesize_plt_symbols(struct dso *self, Elf *elf, f = symbol__new(plt_offset, shdr_plt.sh_entsize, sympltname, self->sym_priv_size, 0, verbose); if (!f) - return -1; + goto out_elf_end; dso__insert_symbol(self, f); ++nr; @@ -460,19 +485,25 @@ static int dso__synthesize_plt_symbols(struct dso *self, Elf *elf, f = symbol__new(plt_offset, shdr_plt.sh_entsize, sympltname, self->sym_priv_size, 0, verbose); if (!f) - return -1; + goto out_elf_end; dso__insert_symbol(self, f); ++nr; } - } else { - /* - * TODO: There are still one more shdr_rel_plt.sh_type - * I have to investigate, but probably should be ignored. - */ } - return nr; + err = 0; +out_elf_end: + elf_end(elf); +out_close: + close(fd); + + if (err == 0) + return nr; +out: + fprintf(stderr, "%s: problems reading %s PLT info.\n", + __func__, self->name); + return 0; } static int dso__load_sym(struct dso *self, int fd, const char *name, @@ -486,9 +517,8 @@ static int dso__load_sym(struct dso *self, int fd, const char *name, GElf_Shdr shdr; Elf_Data *syms; GElf_Sym sym; - Elf_Scn *sec, *sec_dynsym, *sec_strndx; + Elf_Scn *sec, *sec_strndx; Elf *elf; - size_t dynsym_idx; int nr = 0; elf = elf_begin(fd, ELF_C_READ_MMAP, NULL); @@ -505,32 +535,11 @@ static int dso__load_sym(struct dso *self, int fd, const char *name, goto out_elf_end; } - /* - * We need to check if we have a .dynsym, so that we can handle the - * .plt, synthesizing its symbols, that aren't on the symtabs (be it - * .dynsym or .symtab) - */ - sec_dynsym = elf_section_by_name(elf, &ehdr, &shdr, - ".dynsym", &dynsym_idx); - if (sec_dynsym != NULL) { - nr = dso__synthesize_plt_symbols(self, elf, &ehdr, - sec_dynsym, &shdr, - dynsym_idx, verbose); - if (nr < 0) - goto out_elf_end; - } - - /* - * But if we have a full .symtab (that is a superset of .dynsym) we - * should add the symbols not in the .dynsyn - */ sec = elf_section_by_name(elf, &ehdr, &shdr, ".symtab", NULL); if (sec == NULL) { - if (sec_dynsym == NULL) + sec = elf_section_by_name(elf, &ehdr, &shdr, ".dynsym", NULL); + if (sec == NULL) goto out_elf_end; - - sec = sec_dynsym; - gelf_getshdr(sec, &shdr); } syms = elf_getdata(sec, NULL); @@ -669,6 +678,11 @@ more: if (!ret) goto more; + if (ret > 0) { + int nr_plt = dso__synthesize_plt_symbols(self, verbose); + if (nr_plt > 0) + ret += nr_plt; + } out: free(name); return ret; -- cgit v1.2.3 From e3d7e183dc276df2fcaf02af173a49ad119ba9f9 Mon Sep 17 00:00:00 2001 From: Arnaldo Carvalho de Melo Date: Sat, 11 Jul 2009 12:18:37 -0300 Subject: perf report: Introduce -n/--show-nr-samples [acme@doppio pahole]$ perf report -ns comm,dso,symbol -d /lib64/libc-2.10.1.so -C pahole | head -17 21.94% 32101 [.] _int_malloc 20.10% 29402 [.] __GI_strcmp 16.77% 24533 [.] __tsearch 12.61% 18450 [.] malloc_consolidate 6.42% 9394 [.] _int_free 6.28% 9191 [.] __tfind 4.56% 6678 [.] __GI___libc_free 4.46% 6520 [.] _IO_vfprintf_internal 2.59% 3786 [.] __malloc 1.17% 1716 [.] __GI_memcpy [acme@doppio pahole]$ Signed-off-by: Arnaldo Carvalho de Melo LKML-Reference: <1247325517-12272-5-git-send-email-acme@redhat.com> Signed-off-by: Ingo Molnar --- tools/perf/Documentation/perf-report.txt | 3 +++ tools/perf/builtin-report.c | 18 ++++++++++++++++++ 2 files changed, 21 insertions(+) diff --git a/tools/perf/Documentation/perf-report.txt b/tools/perf/Documentation/perf-report.txt index 05774dfbd14..e72e9311078 100644 --- a/tools/perf/Documentation/perf-report.txt +++ b/tools/perf/Documentation/perf-report.txt @@ -24,6 +24,9 @@ OPTIONS --dsos=:: Only consider symbols in these dsos. CSV that understands file://filename entries. +-n +--show-nr-samples + Show the number of samples for each symbol -C:: --comms=:: Only consider symbols in these comms. CSV that understands diff --git a/tools/perf/builtin-report.c b/tools/perf/builtin-report.c index f3422121d85..430a195b858 100644 --- a/tools/perf/builtin-report.c +++ b/tools/perf/builtin-report.c @@ -51,6 +51,7 @@ static int verbose; static int modules; static int full_paths; +static int show_nr_samples; static unsigned long page_size; static unsigned long mmap_window = 32; @@ -1024,6 +1025,13 @@ hist_entry__fprintf(FILE *fp, struct hist_entry *self, u64 total_samples) else ret = fprintf(fp, field_sep ? "%lld" : "%12lld ", self->count); + if (show_nr_samples) { + if (field_sep) + fprintf(fp, "%c%lld", *field_sep, self->count); + else + fprintf(fp, "%11lld", self->count); + } + list_for_each_entry(se, &hist_entry__sort_list, list) { if (se->elide) continue; @@ -1361,6 +1369,12 @@ static size_t output__fprintf(FILE *fp, u64 total_samples) fprintf(fp, "#\n"); fprintf(fp, "# Overhead"); + if (show_nr_samples) { + if (field_sep) + fprintf(fp, "%cSamples", *field_sep); + else + fputs(" Samples ", fp); + } list_for_each_entry(se, &hist_entry__sort_list, list) { if (se->elide) continue; @@ -1388,6 +1402,8 @@ static size_t output__fprintf(FILE *fp, u64 total_samples) goto print_entries; fprintf(fp, "# ........"); + if (show_nr_samples) + fprintf(fp, " .........."); list_for_each_entry(se, &hist_entry__sort_list, list) { unsigned int i; @@ -1979,6 +1995,8 @@ static const struct option options[] = { OPT_STRING('k', "vmlinux", &vmlinux, "file", "vmlinux pathname"), OPT_BOOLEAN('m', "modules", &modules, "load module symbols - WARNING: use only with -k and LIVE kernel"), + OPT_BOOLEAN('n', "show-nr-samples", &show_nr_samples, + "Show a column with the number of samples"), OPT_STRING('s', "sort", &sort_order, "key[,key2...]", "sort by key(s): pid, comm, dso, symbol, parent"), OPT_BOOLEAN('P', "full-paths", &full_paths, -- cgit v1.2.3 From 373c0a7ed3ea3b34efedb7c83ffb521adff7c894 Mon Sep 17 00:00:00 2001 From: Trond Myklebust Date: Sat, 11 Jul 2009 10:06:54 -0400 Subject: Fix compile error due to congestion_wait() changes Move the definition of BLK_RW_ASYNC/BLK_RW_SYNC into linux/backing-dev.h so that it is available to all callers of set/clear_bdi_congested(). This replaces commit 097041e576ee3a50d92dd643ee8ca65bf6a62e21 ("fuse: Fix build error"), which will be reverted. Signed-off-by: Trond Myklebust Acked-by: Larry Finger Cc: Jens Axboe Cc: Miklos Szeredi Signed-off-by: Linus Torvalds --- include/linux/backing-dev.h | 5 +++++ include/linux/blkdev.h | 5 ----- 2 files changed, 5 insertions(+), 5 deletions(-) diff --git a/include/linux/backing-dev.h b/include/linux/backing-dev.h index 3a52a63c135..1d52425a611 100644 --- a/include/linux/backing-dev.h +++ b/include/linux/backing-dev.h @@ -229,6 +229,11 @@ static inline int bdi_rw_congested(struct backing_dev_info *bdi) (1 << BDI_async_congested)); } +enum { + BLK_RW_ASYNC = 0, + BLK_RW_SYNC = 1, +}; + void clear_bdi_congested(struct backing_dev_info *bdi, int sync); void set_bdi_congested(struct backing_dev_info *bdi, int sync); long congestion_wait(int sync, long timeout); diff --git a/include/linux/blkdev.h b/include/linux/blkdev.h index 0146e0fecf1..e7cb5dbf6c2 100644 --- a/include/linux/blkdev.h +++ b/include/linux/blkdev.h @@ -70,11 +70,6 @@ enum rq_cmd_type_bits { REQ_TYPE_ATA_PC, }; -enum { - BLK_RW_ASYNC = 0, - BLK_RW_SYNC = 1, -}; - /* * For request of type REQ_TYPE_LINUX_BLOCK, rq->cmd[0] is the opcode being * sent down (similar to how REQ_TYPE_BLOCK_PC means that ->cmd[] holds a -- cgit v1.2.3 From 81e4e1ba7ed4a1fdcf0e2ee944f1575010471464 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Sat, 11 Jul 2009 11:22:34 -0700 Subject: Revert "fuse: Fix build error" as unnecessary This reverts commit 097041e576ee3a50d92dd643ee8ca65bf6a62e21. Trond had a better fix, which is the parent of this one ("Fix compile error due to congestion_wait() changes") Requested-by: Trond Myklebust Acked-by: Larry Finger Signed-off-by: Linus Torvalds --- fs/fuse/dev.c | 1 - fs/nfs/write.c | 1 - 2 files changed, 2 deletions(-) diff --git a/fs/fuse/dev.c b/fs/fuse/dev.c index cbceacbc0bf..6484eb75acd 100644 --- a/fs/fuse/dev.c +++ b/fs/fuse/dev.c @@ -16,7 +16,6 @@ #include #include #include -#include MODULE_ALIAS_MISCDEV(FUSE_MINOR); diff --git a/fs/nfs/write.c b/fs/nfs/write.c index 35d81316163..0a0a2ff767c 100644 --- a/fs/nfs/write.c +++ b/fs/nfs/write.c @@ -19,7 +19,6 @@ #include #include #include -#include #include -- cgit v1.2.3 From e912b1142be8f1e2c71c71001dc992c6e5eb2ec1 Mon Sep 17 00:00:00 2001 From: Eric Dumazet Date: Wed, 8 Jul 2009 19:36:05 +0000 Subject: net: sk_prot_alloc() should not blindly overwrite memory Some sockets use SLAB_DESTROY_BY_RCU, and our RCU code correctness depends on sk->sk_nulls_node.next being always valid. A NULL value is not allowed as it might fault a lockless reader. Current sk_prot_alloc() implementation doesnt respect this hypothesis, calling kmem_cache_alloc() with __GFP_ZERO. Just call memset() around the forbidden field. Signed-off-by: Eric Dumazet Signed-off-by: David S. Miller --- net/core/sock.c | 19 +++++++++++++++++-- 1 file changed, 17 insertions(+), 2 deletions(-) diff --git a/net/core/sock.c b/net/core/sock.c index 6354863b1c6..ba5d2116aea 100644 --- a/net/core/sock.c +++ b/net/core/sock.c @@ -939,8 +939,23 @@ static struct sock *sk_prot_alloc(struct proto *prot, gfp_t priority, struct kmem_cache *slab; slab = prot->slab; - if (slab != NULL) - sk = kmem_cache_alloc(slab, priority); + if (slab != NULL) { + sk = kmem_cache_alloc(slab, priority & ~__GFP_ZERO); + if (!sk) + return sk; + if (priority & __GFP_ZERO) { + /* + * caches using SLAB_DESTROY_BY_RCU should let + * sk_node.next un-modified. Special care is taken + * when initializing object to zero. + */ + if (offsetof(struct sock, sk_node.next) != 0) + memset(sk, 0, offsetof(struct sock, sk_node.next)); + memset(&sk->sk_node.pprev, 0, + prot->obj_size - offsetof(struct sock, + sk_node.pprev)); + } + } else sk = kmalloc(prot->obj_size, priority); -- cgit v1.2.3 From e51a67a9c8a2ea5c563f8c2ba6613fe2100ffe67 Mon Sep 17 00:00:00 2001 From: Eric Dumazet Date: Wed, 8 Jul 2009 14:20:42 +0000 Subject: net: ip_push_pending_frames() fix After commit 2b85a34e911bf483c27cfdd124aeb1605145dc80 (net: No more expensive sock_hold()/sock_put() on each tx) we do not take any more references on sk->sk_refcnt on outgoing packets. I forgot to delete two __sock_put() from ip_push_pending_frames() and ip6_push_pending_frames(). Reported-by: Emil S Tantilov Signed-off-by: Eric Dumazet Tested-by: Emil S Tantilov Signed-off-by: David S. Miller --- net/ipv4/ip_output.c | 1 - net/ipv6/ip6_output.c | 1 - 2 files changed, 2 deletions(-) diff --git a/net/ipv4/ip_output.c b/net/ipv4/ip_output.c index 24702628266..7d082105472 100644 --- a/net/ipv4/ip_output.c +++ b/net/ipv4/ip_output.c @@ -1243,7 +1243,6 @@ int ip_push_pending_frames(struct sock *sk) skb->len += tmp_skb->len; skb->data_len += tmp_skb->len; skb->truesize += tmp_skb->truesize; - __sock_put(tmp_skb->sk); tmp_skb->destructor = NULL; tmp_skb->sk = NULL; } diff --git a/net/ipv6/ip6_output.c b/net/ipv6/ip6_output.c index 7c76e3d1821..87f8419a68f 100644 --- a/net/ipv6/ip6_output.c +++ b/net/ipv6/ip6_output.c @@ -1484,7 +1484,6 @@ int ip6_push_pending_frames(struct sock *sk) skb->len += tmp_skb->len; skb->data_len += tmp_skb->len; skb->truesize += tmp_skb->truesize; - __sock_put(tmp_skb->sk); tmp_skb->destructor = NULL; tmp_skb->sk = NULL; } -- cgit v1.2.3 From f2ba025b2036e52a176cddcf91b15ac2b10c644a Mon Sep 17 00:00:00 2001 From: Sascha Hlusiak Date: Sat, 11 Jul 2009 20:30:52 -0700 Subject: sit: fix regression: do not release skb->dst before xmit The sit module makes use of skb->dst in it's xmit function, so since 93f154b594fe47 ("net: release dst entry in dev_hard_start_xmit()") sit tunnels are broken, because the flag IFF_XMIT_DST_RELEASE is not unset. This patch unsets that flag for sit devices to fix this regression. Signed-off-by: Sascha Hlusiak Acked-by: Eric Dumazet Signed-off-by: David S. Miller --- net/ipv6/sit.c | 1 + 1 file changed, 1 insertion(+) diff --git a/net/ipv6/sit.c b/net/ipv6/sit.c index 68e52308e55..98b7327d094 100644 --- a/net/ipv6/sit.c +++ b/net/ipv6/sit.c @@ -1018,6 +1018,7 @@ static void ipip6_tunnel_setup(struct net_device *dev) dev->hard_header_len = LL_MAX_HEADER + sizeof(struct iphdr); dev->mtu = ETH_DATA_LEN - sizeof(struct iphdr); dev->flags = IFF_NOARP; + dev->priv_flags &= ~IFF_XMIT_DST_RELEASE; dev->iflink = 0; dev->addr_len = 4; dev->features |= NETIF_F_NETNS_LOCAL; -- cgit v1.2.3 From a137802ee839ace40079bebde24cfb416f73208a Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Sun, 12 Jul 2009 11:25:04 -0700 Subject: Don't use '-fwrapv' compiler option: it's buggy in gcc-4.1.x This causes kernel images that don't run init to completion with certain broken gcc versions. This fixes kernel bugzilla entry: http://bugzilla.kernel.org/show_bug.cgi?id=13012 I suspect the gcc problem is this: http://gcc.gnu.org/bugzilla/show_bug.cgi?id=28230 Fix the problem by using the -fno-strict-overflow flag instead, which not only does not exist in the known-to-be-broken versions of gcc (it was introduced later than fwrapv), but seems to be much less disturbing to gcc too: the difference in the generated code by -fno-strict-overflow are smaller (compared to using neither flag) than when using -fwrapv. Reported-by: Barry K. Nathan Pushed-by: Frans Pop Cc: Andrew Morton Cc: stable@kernel.org Signed-off-by: Linus Torvalds --- Makefile | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/Makefile b/Makefile index 0aeec59c1f0..bbe8453baa7 100644 --- a/Makefile +++ b/Makefile @@ -565,7 +565,7 @@ KBUILD_CFLAGS += $(call cc-option,-Wdeclaration-after-statement,) KBUILD_CFLAGS += $(call cc-option,-Wno-pointer-sign,) # disable invalid "can't wrap" optimizations for signed / pointers -KBUILD_CFLAGS += $(call cc-option,-fwrapv) +KBUILD_CFLAGS += $(call cc-option,-fno-strict-overflow) # revert to pre-gcc-4.4 behaviour of .eh_frame KBUILD_CFLAGS += $(call cc-option,-fno-dwarf2-cfi-asm) -- cgit v1.2.3 From f9fabcb58a6d26d6efde842d1703ac7cfa9427b6 Mon Sep 17 00:00:00 2001 From: Julien Tinnes Date: Fri, 26 Jun 2009 20:27:40 +0200 Subject: personality: fix PER_CLEAR_ON_SETID We have found that the current PER_CLEAR_ON_SETID mask on Linux doesn't include neither ADDR_COMPAT_LAYOUT, nor MMAP_PAGE_ZERO. The current mask is READ_IMPLIES_EXEC|ADDR_NO_RANDOMIZE. We believe it is important to add MMAP_PAGE_ZERO, because by using this personality it is possible to have the first page mapped inside a process running as setuid root. This could be used in those scenarios: - Exploiting a NULL pointer dereference issue in a setuid root binary - Bypassing the mmap_min_addr restrictions of the Linux kernel: by running a setuid binary that would drop privileges before giving us control back (for instance by loading a user-supplied library), we could get the first page mapped in a process we control. By further using mremap and mprotect on this mapping, we can then completely bypass the mmap_min_addr restrictions. Less importantly, we believe ADDR_COMPAT_LAYOUT should also be added since on x86 32bits it will in practice disable most of the address space layout randomization (only the stack will remain randomized). Signed-off-by: Julien Tinnes Signed-off-by: Tavis Ormandy Cc: stable@kernel.org Acked-by: Christoph Hellwig Acked-by: Kees Cook Acked-by: Eugene Teo [ Shortened lines and fixed whitespace as per Christophs' suggestion ] Signed-off-by: Linus Torvalds --- include/linux/personality.h | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) diff --git a/include/linux/personality.h b/include/linux/personality.h index a84e9ff9b27..126120819a0 100644 --- a/include/linux/personality.h +++ b/include/linux/personality.h @@ -40,7 +40,10 @@ enum { * Security-relevant compatibility flags that must be * cleared upon setuid or setgid exec: */ -#define PER_CLEAR_ON_SETID (READ_IMPLIES_EXEC|ADDR_NO_RANDOMIZE) +#define PER_CLEAR_ON_SETID (READ_IMPLIES_EXEC | \ + ADDR_NO_RANDOMIZE | \ + ADDR_COMPAT_LAYOUT | \ + MMAP_PAGE_ZERO) /* * Personality types. -- cgit v1.2.3 From 405f55712dfe464b3240d7816cc4fe4174831be2 Mon Sep 17 00:00:00 2001 From: Alexey Dobriyan Date: Sat, 11 Jul 2009 22:08:37 +0400 Subject: headers: smp_lock.h redux * Remove smp_lock.h from files which don't need it (including some headers!) * Add smp_lock.h to files which do need it * Make smp_lock.h include conditional in hardirq.h It's needed only for one kernel_locked() usage which is under CONFIG_PREEMPT This will make hardirq.h inclusion cheaper for every PREEMPT=n config (which includes allmodconfig/allyesconfig, BTW) Signed-off-by: Alexey Dobriyan Signed-off-by: Linus Torvalds --- arch/alpha/kernel/ptrace.c | 1 - arch/blackfin/kernel/ptrace.c | 1 - arch/blackfin/kernel/sys_bfin.c | 1 - arch/cris/kernel/sys_cris.c | 1 - arch/ia64/kernel/ptrace.c | 1 - arch/m32r/kernel/ptrace.c | 1 - arch/microblaze/kernel/ptrace.c | 1 - arch/microblaze/kernel/signal.c | 1 - arch/microblaze/kernel/sys_microblaze.c | 1 - arch/mips/kernel/ptrace32.c | 1 - arch/mips/mm/hugetlbpage.c | 1 - arch/mn10300/kernel/ptrace.c | 1 - arch/mn10300/kernel/signal.c | 1 - arch/mn10300/kernel/sys_mn10300.c | 1 - arch/mn10300/kernel/traps.c | 1 - arch/mn10300/mm/fault.c | 1 - arch/mn10300/mm/misalignment.c | 1 - arch/powerpc/kernel/ptrace32.c | 1 - arch/s390/kernel/dis.c | 1 - arch/s390/kernel/ptrace.c | 1 - arch/s390/mm/fault.c | 1 - arch/sh/mm/tlb-sh3.c | 1 - arch/sparc/kernel/ptrace_32.c | 1 - arch/sparc/kernel/ptrace_64.c | 1 - arch/sparc/kernel/time_64.c | 1 - arch/sparc/kernel/traps_32.c | 1 - drivers/block/DAC960.c | 1 + drivers/block/cciss.c | 1 + drivers/block/loop.c | 1 - drivers/bluetooth/hci_vhci.c | 1 - drivers/char/amiserial.c | 1 + drivers/char/cyclades.c | 1 + drivers/char/epca.c | 1 + drivers/char/isicom.c | 1 + drivers/char/istallion.c | 1 + drivers/char/moxa.c | 1 + drivers/char/mxser.c | 1 + drivers/char/n_hdlc.c | 1 + drivers/char/n_r3964.c | 1 + drivers/char/pty.c | 1 + drivers/char/rio/rio_linux.c | 1 + drivers/char/riscom8.c | 1 + drivers/char/rocket.c | 1 + drivers/char/serial167.c | 1 + drivers/char/specialix.c | 1 + drivers/char/sx.c | 1 + drivers/char/synclink.c | 1 + drivers/char/synclink_gt.c | 1 + drivers/char/synclinkmp.c | 1 + drivers/char/tpm/tpm.c | 1 - drivers/char/tty_ioctl.c | 1 - drivers/char/tty_ldisc.c | 1 - drivers/char/vt.c | 1 + drivers/char/vt_ioctl.c | 1 + drivers/gpio/vr41xx_giu.c | 1 - drivers/hid/usbhid/hid-core.c | 1 - drivers/isdn/hisax/hfc_usb.c | 1 - drivers/isdn/i4l/isdn_tty.c | 1 + drivers/isdn/mISDN/stack.c | 1 + drivers/media/dvb/bt8xx/dst_ca.c | 1 + drivers/media/dvb/dvb-core/dvbdev.h | 1 - drivers/media/dvb/ttpci/av7110.c | 1 - drivers/media/radio/radio-mr800.c | 1 + drivers/media/radio/radio-si470x.c | 1 + drivers/media/video/bt8xx/bttv-driver.c | 1 + drivers/media/video/cx23885/cx23885-417.c | 1 + drivers/media/video/cx23885/cx23885-video.c | 1 + drivers/media/video/cx88/cx88-blackbird.c | 1 + drivers/media/video/cx88/cx88-video.c | 1 + drivers/media/video/dabusb.c | 1 + drivers/media/video/pwc/pwc-if.c | 1 + drivers/media/video/pwc/pwc.h | 1 - drivers/media/video/s2255drv.c | 1 + drivers/media/video/saa5246a.c | 1 - drivers/media/video/saa5249.c | 1 - drivers/media/video/saa7134/saa7134-empress.c | 1 + drivers/media/video/se401.c | 1 + drivers/media/video/stk-webcam.c | 1 + drivers/media/video/stradis.c | 1 + drivers/media/video/stv680.c | 1 + drivers/media/video/usbvideo/vicam.c | 1 + drivers/media/video/usbvision/usbvision-video.c | 1 + drivers/media/video/v4l2-dev.c | 1 - drivers/media/video/zoran/zoran_driver.c | 1 + drivers/misc/sgi-gru/grufile.c | 1 - drivers/misc/sgi-gru/grukservices.c | 1 - drivers/net/irda/irtty-sir.c | 1 - drivers/pci/hotplug/cpci_hotplug_core.c | 1 - drivers/pci/hotplug/cpqphp_ctrl.c | 1 - drivers/pci/hotplug/cpqphp_sysfs.c | 1 + drivers/pci/hotplug/pciehp_ctrl.c | 1 - drivers/pci/syscall.c | 1 - drivers/s390/block/dasd_ioctl.c | 1 + drivers/scsi/qla2xxx/qla_mid.c | 1 - drivers/telephony/ixj.c | 1 + drivers/telephony/phonedev.c | 1 - drivers/usb/class/cdc-wdm.c | 1 - drivers/usb/gadget/amd5536udc.c | 1 - drivers/usb/gadget/langwell_udc.c | 1 - drivers/usb/gadget/s3c2410_udc.c | 1 - drivers/usb/host/r8a66597-hcd.c | 1 - drivers/usb/misc/iowarrior.c | 1 + drivers/usb/misc/rio500.c | 1 + drivers/usb/misc/usblcd.c | 1 + drivers/usb/musb/cppi_dma.h | 1 - drivers/usb/musb/musb_core.h | 1 - drivers/usb/serial/ftdi_sio.c | 1 + drivers/usb/serial/mos7840.c | 1 + drivers/usb/serial/usb-serial.c | 1 + drivers/video/fbmem.c | 1 - fs/adfs/super.c | 1 + fs/afs/super.c | 1 + fs/autofs4/dev-ioctl.c | 1 - fs/bfs/dir.c | 1 - fs/bfs/file.c | 1 - fs/btrfs/compression.c | 1 - fs/btrfs/file.c | 1 - fs/btrfs/inode.c | 1 - fs/btrfs/ioctl.c | 1 - fs/btrfs/super.c | 1 - fs/char_dev.c | 1 - fs/compat.c | 1 - fs/compat_ioctl.c | 1 + fs/exofs/super.c | 1 + fs/ext2/ioctl.c | 1 - fs/ext4/ioctl.c | 1 - fs/fat/dir.c | 1 - fs/fat/namei_msdos.c | 1 - fs/fat/namei_vfat.c | 1 - fs/fcntl.c | 1 - fs/freevxfs/vxfs_super.c | 1 + fs/hfs/super.c | 1 + fs/hfsplus/super.c | 1 + fs/hpfs/dir.c | 1 + fs/hpfs/file.c | 1 + fs/hpfs/hpfs_fn.h | 1 - fs/hpfs/inode.c | 1 + fs/hpfs/namei.c | 1 + fs/jffs2/super.c | 1 + fs/lockd/clntproc.c | 1 + fs/lockd/svc4proc.c | 1 + fs/lockd/svcproc.c | 1 + fs/nfs/delegation.c | 1 + fs/nfs/dir.c | 1 - fs/nfs/file.c | 1 - fs/nfs/inode.c | 1 - fs/nfs/nfs4proc.c | 1 - fs/nfs/read.c | 1 - fs/nfsd/nfsctl.c | 1 - fs/nfsd/nfssvc.c | 1 - fs/nilfs2/dir.c | 1 - fs/ocfs2/ioctl.c | 1 - fs/reiserfs/xattr.c | 1 - fs/squashfs/super.c | 1 + fs/ubifs/ioctl.c | 1 - fs/xfs/linux-2.6/xfs_file.c | 1 - include/linux/crash_dump.h | 1 - include/linux/hardirq.h | 2 ++ include/linux/quotaops.h | 1 - include/linux/sunrpc/xdr.h | 1 - kernel/power/user.c | 1 - kernel/trace/blktrace.c | 1 + kernel/trace/trace.c | 1 + net/appletalk/ddp.c | 1 + net/ipx/af_ipx.c | 1 + net/irda/af_irda.c | 1 + net/irda/irnet/irnet.h | 1 - net/irda/irnet/irnet_ppp.c | 1 + net/sunrpc/clnt.c | 1 - net/sunrpc/sched.c | 1 - net/sunrpc/svc_xprt.c | 1 + net/wanrouter/wanmain.c | 1 + net/x25/af_x25.c | 1 + 173 files changed, 81 insertions(+), 93 deletions(-) diff --git a/arch/alpha/kernel/ptrace.c b/arch/alpha/kernel/ptrace.c index 1e9ad52c460..e072041d19f 100644 --- a/arch/alpha/kernel/ptrace.c +++ b/arch/alpha/kernel/ptrace.c @@ -8,7 +8,6 @@ #include #include #include -#include #include #include #include diff --git a/arch/blackfin/kernel/ptrace.c b/arch/blackfin/kernel/ptrace.c index d76618db50d..6a387eec6b6 100644 --- a/arch/blackfin/kernel/ptrace.c +++ b/arch/blackfin/kernel/ptrace.c @@ -31,7 +31,6 @@ #include #include #include -#include #include #include #include diff --git a/arch/blackfin/kernel/sys_bfin.c b/arch/blackfin/kernel/sys_bfin.c index a8f1329c15a..3da60fb13ce 100644 --- a/arch/blackfin/kernel/sys_bfin.c +++ b/arch/blackfin/kernel/sys_bfin.c @@ -29,7 +29,6 @@ * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA */ -#include #include #include #include diff --git a/arch/cris/kernel/sys_cris.c b/arch/cris/kernel/sys_cris.c index a79fbd87021..2ad962c7e88 100644 --- a/arch/cris/kernel/sys_cris.c +++ b/arch/cris/kernel/sys_cris.c @@ -15,7 +15,6 @@ #include #include #include -#include #include #include #include diff --git a/arch/ia64/kernel/ptrace.c b/arch/ia64/kernel/ptrace.c index 92c9689b7d9..9daa87fdb01 100644 --- a/arch/ia64/kernel/ptrace.c +++ b/arch/ia64/kernel/ptrace.c @@ -15,7 +15,6 @@ #include #include #include -#include #include #include #include diff --git a/arch/m32r/kernel/ptrace.c b/arch/m32r/kernel/ptrace.c index bf0abe9e1f7..98b8feb12ed 100644 --- a/arch/m32r/kernel/ptrace.c +++ b/arch/m32r/kernel/ptrace.c @@ -19,7 +19,6 @@ #include #include #include -#include #include #include #include diff --git a/arch/microblaze/kernel/ptrace.c b/arch/microblaze/kernel/ptrace.c index b86aa623e36..53ff39af6a5 100644 --- a/arch/microblaze/kernel/ptrace.c +++ b/arch/microblaze/kernel/ptrace.c @@ -27,7 +27,6 @@ #include #include #include -#include #include #include diff --git a/arch/microblaze/kernel/signal.c b/arch/microblaze/kernel/signal.c index 493819c25fb..1c80e4fc40c 100644 --- a/arch/microblaze/kernel/signal.c +++ b/arch/microblaze/kernel/signal.c @@ -21,7 +21,6 @@ #include #include #include -#include #include #include #include diff --git a/arch/microblaze/kernel/sys_microblaze.c b/arch/microblaze/kernel/sys_microblaze.c index 8c9ebac5da1..e000bce09b2 100644 --- a/arch/microblaze/kernel/sys_microblaze.c +++ b/arch/microblaze/kernel/sys_microblaze.c @@ -15,7 +15,6 @@ #include #include #include -#include #include #include #include diff --git a/arch/mips/kernel/ptrace32.c b/arch/mips/kernel/ptrace32.c index c4f9ac17474..32644b4a071 100644 --- a/arch/mips/kernel/ptrace32.c +++ b/arch/mips/kernel/ptrace32.c @@ -22,7 +22,6 @@ #include #include #include -#include #include #include diff --git a/arch/mips/mm/hugetlbpage.c b/arch/mips/mm/hugetlbpage.c index 471c09aa161..8c2834f5919 100644 --- a/arch/mips/mm/hugetlbpage.c +++ b/arch/mips/mm/hugetlbpage.c @@ -16,7 +16,6 @@ #include #include #include -#include #include #include #include diff --git a/arch/mn10300/kernel/ptrace.c b/arch/mn10300/kernel/ptrace.c index e143339ad28..cf847dabc1b 100644 --- a/arch/mn10300/kernel/ptrace.c +++ b/arch/mn10300/kernel/ptrace.c @@ -13,7 +13,6 @@ #include #include #include -#include #include #include #include diff --git a/arch/mn10300/kernel/signal.c b/arch/mn10300/kernel/signal.c index 9f7572a0f57..feb2f2e810d 100644 --- a/arch/mn10300/kernel/signal.c +++ b/arch/mn10300/kernel/signal.c @@ -12,7 +12,6 @@ #include #include #include -#include #include #include #include diff --git a/arch/mn10300/kernel/sys_mn10300.c b/arch/mn10300/kernel/sys_mn10300.c index bca5a84dc72..29d196b83d2 100644 --- a/arch/mn10300/kernel/sys_mn10300.c +++ b/arch/mn10300/kernel/sys_mn10300.c @@ -13,7 +13,6 @@ #include #include #include -#include #include #include #include diff --git a/arch/mn10300/kernel/traps.c b/arch/mn10300/kernel/traps.c index 0dfdc500112..91365adba4f 100644 --- a/arch/mn10300/kernel/traps.c +++ b/arch/mn10300/kernel/traps.c @@ -17,7 +17,6 @@ #include #include #include -#include #include #include #include diff --git a/arch/mn10300/mm/fault.c b/arch/mn10300/mm/fault.c index a62e1e138bc..53bb17d0f06 100644 --- a/arch/mn10300/mm/fault.c +++ b/arch/mn10300/mm/fault.c @@ -20,7 +20,6 @@ #include #include #include -#include #include #include #include /* For unblank_screen() */ diff --git a/arch/mn10300/mm/misalignment.c b/arch/mn10300/mm/misalignment.c index 94c4a435806..30016251f65 100644 --- a/arch/mn10300/mm/misalignment.c +++ b/arch/mn10300/mm/misalignment.c @@ -17,7 +17,6 @@ #include #include #include -#include #include #include #include diff --git a/arch/powerpc/kernel/ptrace32.c b/arch/powerpc/kernel/ptrace32.c index 297632cba04..8a6daf4129f 100644 --- a/arch/powerpc/kernel/ptrace32.c +++ b/arch/powerpc/kernel/ptrace32.c @@ -21,7 +21,6 @@ #include #include #include -#include #include #include #include diff --git a/arch/s390/kernel/dis.c b/arch/s390/kernel/dis.c index d2f270c995d..db943a7ec51 100644 --- a/arch/s390/kernel/dis.c +++ b/arch/s390/kernel/dis.c @@ -15,7 +15,6 @@ #include #include #include -#include #include #include #include diff --git a/arch/s390/kernel/ptrace.c b/arch/s390/kernel/ptrace.c index 490b39934d6..43acd73105b 100644 --- a/arch/s390/kernel/ptrace.c +++ b/arch/s390/kernel/ptrace.c @@ -26,7 +26,6 @@ #include #include #include -#include #include #include #include diff --git a/arch/s390/mm/fault.c b/arch/s390/mm/fault.c index 74eb26bf197..e5e119fe03b 100644 --- a/arch/s390/mm/fault.c +++ b/arch/s390/mm/fault.c @@ -22,7 +22,6 @@ #include #include #include -#include #include #include #include diff --git a/arch/sh/mm/tlb-sh3.c b/arch/sh/mm/tlb-sh3.c index 7fbfd5a11ff..17cb7c3adf2 100644 --- a/arch/sh/mm/tlb-sh3.c +++ b/arch/sh/mm/tlb-sh3.c @@ -18,7 +18,6 @@ #include #include #include -#include #include #include diff --git a/arch/sparc/kernel/ptrace_32.c b/arch/sparc/kernel/ptrace_32.c index 8ce6285a06d..7e3dfd9bb97 100644 --- a/arch/sparc/kernel/ptrace_32.c +++ b/arch/sparc/kernel/ptrace_32.c @@ -16,7 +16,6 @@ #include #include #include -#include #include #include #include diff --git a/arch/sparc/kernel/ptrace_64.c b/arch/sparc/kernel/ptrace_64.c index a941c610e7c..4ae91dc2feb 100644 --- a/arch/sparc/kernel/ptrace_64.c +++ b/arch/sparc/kernel/ptrace_64.c @@ -17,7 +17,6 @@ #include #include #include -#include #include #include #include diff --git a/arch/sparc/kernel/time_64.c b/arch/sparc/kernel/time_64.c index 5c12e79b4bd..da1218e8ee8 100644 --- a/arch/sparc/kernel/time_64.c +++ b/arch/sparc/kernel/time_64.c @@ -11,7 +11,6 @@ #include #include #include -#include #include #include #include diff --git a/arch/sparc/kernel/traps_32.c b/arch/sparc/kernel/traps_32.c index 358283341b4..c0490c7bbde 100644 --- a/arch/sparc/kernel/traps_32.c +++ b/arch/sparc/kernel/traps_32.c @@ -13,7 +13,6 @@ #include #include #include -#include #include #include diff --git a/drivers/block/DAC960.c b/drivers/block/DAC960.c index 668dc234b8e..1e6b7c14f69 100644 --- a/drivers/block/DAC960.c +++ b/drivers/block/DAC960.c @@ -36,6 +36,7 @@ #include #include #include +#include #include #include #include diff --git a/drivers/block/cciss.c b/drivers/block/cciss.c index 65a0655e7fc..a52cc7fe45e 100644 --- a/drivers/block/cciss.c +++ b/drivers/block/cciss.c @@ -26,6 +26,7 @@ #include #include #include +#include #include #include #include diff --git a/drivers/block/loop.c b/drivers/block/loop.c index 801f4ab8330..5757188cd1f 100644 --- a/drivers/block/loop.c +++ b/drivers/block/loop.c @@ -61,7 +61,6 @@ #include #include #include -#include #include #include #include diff --git a/drivers/bluetooth/hci_vhci.c b/drivers/bluetooth/hci_vhci.c index 1df9dda2e37..d5cde6d86f8 100644 --- a/drivers/bluetooth/hci_vhci.c +++ b/drivers/bluetooth/hci_vhci.c @@ -28,7 +28,6 @@ #include #include #include -#include #include #include #include diff --git a/drivers/char/amiserial.c b/drivers/char/amiserial.c index 72429b6b2fa..6c32fbf0716 100644 --- a/drivers/char/amiserial.c +++ b/drivers/char/amiserial.c @@ -81,6 +81,7 @@ static char *serial_version = "4.30"; #include #include #include +#include #include #include diff --git a/drivers/char/cyclades.c b/drivers/char/cyclades.c index f3366d3f06c..2dafc2da064 100644 --- a/drivers/char/cyclades.c +++ b/drivers/char/cyclades.c @@ -633,6 +633,7 @@ #include #include #include +#include #include #include #include diff --git a/drivers/char/epca.c b/drivers/char/epca.c index abef1f7d84f..ff647ca1c48 100644 --- a/drivers/char/epca.c +++ b/drivers/char/epca.c @@ -36,6 +36,7 @@ #include #include #include +#include #include #include #include diff --git a/drivers/char/isicom.c b/drivers/char/isicom.c index 621d1184673..4f1f4cd670d 100644 --- a/drivers/char/isicom.c +++ b/drivers/char/isicom.c @@ -122,6 +122,7 @@ #include #include #include +#include #include #include #include diff --git a/drivers/char/istallion.c b/drivers/char/istallion.c index 0c999f5bb3d..ab2f3349c5c 100644 --- a/drivers/char/istallion.c +++ b/drivers/char/istallion.c @@ -20,6 +20,7 @@ #include #include +#include #include #include #include diff --git a/drivers/char/moxa.c b/drivers/char/moxa.c index 65b6ff2442c..dd0083bbb64 100644 --- a/drivers/char/moxa.c +++ b/drivers/char/moxa.c @@ -34,6 +34,7 @@ #include #include #include +#include #include #include #include diff --git a/drivers/char/mxser.c b/drivers/char/mxser.c index 52d953eb30c..dbf8d52f31d 100644 --- a/drivers/char/mxser.c +++ b/drivers/char/mxser.c @@ -23,6 +23,7 @@ #include #include #include +#include #include #include #include diff --git a/drivers/char/n_hdlc.c b/drivers/char/n_hdlc.c index 1c43c8cdee2..c68118efad8 100644 --- a/drivers/char/n_hdlc.c +++ b/drivers/char/n_hdlc.c @@ -97,6 +97,7 @@ #include #include #include +#include #include /* used in new tty drivers */ #include /* used in new tty drivers */ #include diff --git a/drivers/char/n_r3964.c b/drivers/char/n_r3964.c index 2e99158ebb8..6934025a1ac 100644 --- a/drivers/char/n_r3964.c +++ b/drivers/char/n_r3964.c @@ -58,6 +58,7 @@ #include #include #include +#include #include #include #include /* used in new tty drivers */ diff --git a/drivers/char/pty.c b/drivers/char/pty.c index 9d1b4f548f6..6e6942c45f5 100644 --- a/drivers/char/pty.c +++ b/drivers/char/pty.c @@ -22,6 +22,7 @@ #include #include #include +#include #include #include #include diff --git a/drivers/char/rio/rio_linux.c b/drivers/char/rio/rio_linux.c index ce81da5b2da..d58c2eb07f0 100644 --- a/drivers/char/rio/rio_linux.c +++ b/drivers/char/rio/rio_linux.c @@ -44,6 +44,7 @@ #include #include #include +#include #include #include diff --git a/drivers/char/riscom8.c b/drivers/char/riscom8.c index 21766045123..171711acf5c 100644 --- a/drivers/char/riscom8.c +++ b/drivers/char/riscom8.c @@ -47,6 +47,7 @@ #include #include #include +#include #include #include diff --git a/drivers/char/rocket.c b/drivers/char/rocket.c index 63d5b628477..0e29a23ec4c 100644 --- a/drivers/char/rocket.c +++ b/drivers/char/rocket.c @@ -73,6 +73,7 @@ #include #include #include +#include #include #include #include diff --git a/drivers/char/serial167.c b/drivers/char/serial167.c index f1f24f0ee26..51e7a46787b 100644 --- a/drivers/char/serial167.c +++ b/drivers/char/serial167.c @@ -52,6 +52,7 @@ #include #include #include +#include #include #include #include diff --git a/drivers/char/specialix.c b/drivers/char/specialix.c index e72be4190a4..bfe4cdb2feb 100644 --- a/drivers/char/specialix.c +++ b/drivers/char/specialix.c @@ -87,6 +87,7 @@ #include #include #include +#include #include #include #include diff --git a/drivers/char/sx.c b/drivers/char/sx.c index 518f2a25d91..a81ec4fcf6f 100644 --- a/drivers/char/sx.c +++ b/drivers/char/sx.c @@ -216,6 +216,7 @@ #include #include #include +#include #include #include #include diff --git a/drivers/char/synclink.c b/drivers/char/synclink.c index afded3a2379..813552f1488 100644 --- a/drivers/char/synclink.c +++ b/drivers/char/synclink.c @@ -81,6 +81,7 @@ #include #include #include +#include #include #include #include diff --git a/drivers/char/synclink_gt.c b/drivers/char/synclink_gt.c index a2e67e6df3a..91f20a92fdd 100644 --- a/drivers/char/synclink_gt.c +++ b/drivers/char/synclink_gt.c @@ -62,6 +62,7 @@ #include #include #include +#include #include #include #include diff --git a/drivers/char/synclinkmp.c b/drivers/char/synclinkmp.c index 6f727e3c53a..8d4a2a8a0a7 100644 --- a/drivers/char/synclinkmp.c +++ b/drivers/char/synclinkmp.c @@ -52,6 +52,7 @@ #include #include #include +#include #include #include #include diff --git a/drivers/char/tpm/tpm.c b/drivers/char/tpm/tpm.c index ccdd828adce..b0603b2e568 100644 --- a/drivers/char/tpm/tpm.c +++ b/drivers/char/tpm/tpm.c @@ -26,7 +26,6 @@ #include #include #include -#include #include "tpm.h" diff --git a/drivers/char/tty_ioctl.c b/drivers/char/tty_ioctl.c index b24f6c6a1ea..ad6ba4ed280 100644 --- a/drivers/char/tty_ioctl.c +++ b/drivers/char/tty_ioctl.c @@ -21,7 +21,6 @@ #include #include #include -#include #include #include diff --git a/drivers/char/tty_ldisc.c b/drivers/char/tty_ldisc.c index 913aa8d3f1c..0ef0dc97ba2 100644 --- a/drivers/char/tty_ldisc.c +++ b/drivers/char/tty_ldisc.c @@ -21,7 +21,6 @@ #include #include #include -#include #include #include #include diff --git a/drivers/char/vt.c b/drivers/char/vt.c index d9113b4c76e..7947bd1b4cf 100644 --- a/drivers/char/vt.c +++ b/drivers/char/vt.c @@ -89,6 +89,7 @@ #include #include #include +#include #include #include #include diff --git a/drivers/char/vt_ioctl.c b/drivers/char/vt_ioctl.c index 7539bed0f7e..95189f288f8 100644 --- a/drivers/char/vt_ioctl.c +++ b/drivers/char/vt_ioctl.c @@ -25,6 +25,7 @@ #include #include #include +#include #include #include diff --git a/drivers/gpio/vr41xx_giu.c b/drivers/gpio/vr41xx_giu.c index b70e06133e7..b16c9a8c03f 100644 --- a/drivers/gpio/vr41xx_giu.c +++ b/drivers/gpio/vr41xx_giu.c @@ -29,7 +29,6 @@ #include #include #include -#include #include #include diff --git a/drivers/hid/usbhid/hid-core.c b/drivers/hid/usbhid/hid-core.c index 76c4bbe9dcc..3c1fcb7640a 100644 --- a/drivers/hid/usbhid/hid-core.c +++ b/drivers/hid/usbhid/hid-core.c @@ -22,7 +22,6 @@ #include #include #include -#include #include #include #include diff --git a/drivers/isdn/hisax/hfc_usb.c b/drivers/isdn/hisax/hfc_usb.c index 8df889b0c1a..9de54202c90 100644 --- a/drivers/isdn/hisax/hfc_usb.c +++ b/drivers/isdn/hisax/hfc_usb.c @@ -37,7 +37,6 @@ #include #include #include -#include #include #include #include "hisax.h" diff --git a/drivers/isdn/i4l/isdn_tty.c b/drivers/isdn/i4l/isdn_tty.c index b4d4522e507..2881a66c1aa 100644 --- a/drivers/isdn/i4l/isdn_tty.c +++ b/drivers/isdn/i4l/isdn_tty.c @@ -13,6 +13,7 @@ #include #include +#include #include "isdn_common.h" #include "isdn_tty.h" #ifdef CONFIG_ISDN_AUDIO diff --git a/drivers/isdn/mISDN/stack.c b/drivers/isdn/mISDN/stack.c index e2f45019ebf..3e1532a180f 100644 --- a/drivers/isdn/mISDN/stack.c +++ b/drivers/isdn/mISDN/stack.c @@ -17,6 +17,7 @@ #include #include +#include #include "core.h" static u_int *debug; diff --git a/drivers/media/dvb/bt8xx/dst_ca.c b/drivers/media/dvb/bt8xx/dst_ca.c index 4601b059b2b..0e246eaad05 100644 --- a/drivers/media/dvb/bt8xx/dst_ca.c +++ b/drivers/media/dvb/bt8xx/dst_ca.c @@ -21,6 +21,7 @@ #include #include #include +#include #include #include #include "dvbdev.h" diff --git a/drivers/media/dvb/dvb-core/dvbdev.h b/drivers/media/dvb/dvb-core/dvbdev.h index 79927305e84..487919bea7a 100644 --- a/drivers/media/dvb/dvb-core/dvbdev.h +++ b/drivers/media/dvb/dvb-core/dvbdev.h @@ -27,7 +27,6 @@ #include #include #include -#include #define DVB_MAJOR 212 diff --git a/drivers/media/dvb/ttpci/av7110.c b/drivers/media/dvb/ttpci/av7110.c index d1d959ed37b..8d65c652ba5 100644 --- a/drivers/media/dvb/ttpci/av7110.c +++ b/drivers/media/dvb/ttpci/av7110.c @@ -36,7 +36,6 @@ #include #include #include -#include #include #include diff --git a/drivers/media/radio/radio-mr800.c b/drivers/media/radio/radio-mr800.c index 837467f9380..575bf9d8941 100644 --- a/drivers/media/radio/radio-mr800.c +++ b/drivers/media/radio/radio-mr800.c @@ -58,6 +58,7 @@ #include #include #include +#include #include #include #include diff --git a/drivers/media/radio/radio-si470x.c b/drivers/media/radio/radio-si470x.c index 46d21632961..e85f318b4d2 100644 --- a/drivers/media/radio/radio-si470x.c +++ b/drivers/media/radio/radio-si470x.c @@ -127,6 +127,7 @@ #include #include #include +#include #include #include #include diff --git a/drivers/media/video/bt8xx/bttv-driver.c b/drivers/media/video/bt8xx/bttv-driver.c index 5eb1464af67..d147d29bb0d 100644 --- a/drivers/media/video/bt8xx/bttv-driver.c +++ b/drivers/media/video/bt8xx/bttv-driver.c @@ -41,6 +41,7 @@ #include #include #include +#include #include #include #include "bttvp.h" diff --git a/drivers/media/video/cx23885/cx23885-417.c b/drivers/media/video/cx23885/cx23885-417.c index 2943bfd32a9..428f0c45e6b 100644 --- a/drivers/media/video/cx23885/cx23885-417.c +++ b/drivers/media/video/cx23885/cx23885-417.c @@ -31,6 +31,7 @@ #include #include #include +#include #include #include #include diff --git a/drivers/media/video/cx23885/cx23885-video.c b/drivers/media/video/cx23885/cx23885-video.c index 70836af3ab4..5d609333630 100644 --- a/drivers/media/video/cx23885/cx23885-video.c +++ b/drivers/media/video/cx23885/cx23885-video.c @@ -26,6 +26,7 @@ #include #include #include +#include #include #include #include diff --git a/drivers/media/video/cx88/cx88-blackbird.c b/drivers/media/video/cx88/cx88-blackbird.c index 44eacfb0d0d..356d6896da3 100644 --- a/drivers/media/video/cx88/cx88-blackbird.c +++ b/drivers/media/video/cx88/cx88-blackbird.c @@ -32,6 +32,7 @@ #include #include #include +#include #include #include #include diff --git a/drivers/media/video/cx88/cx88-video.c b/drivers/media/video/cx88/cx88-video.c index b12770848c0..2bb54c3ef5c 100644 --- a/drivers/media/video/cx88/cx88-video.c +++ b/drivers/media/video/cx88/cx88-video.c @@ -31,6 +31,7 @@ #include #include #include +#include #include #include #include diff --git a/drivers/media/video/dabusb.c b/drivers/media/video/dabusb.c index ec2f45dde16..0664d111085 100644 --- a/drivers/media/video/dabusb.c +++ b/drivers/media/video/dabusb.c @@ -32,6 +32,7 @@ #include #include #include +#include #include #include #include diff --git a/drivers/media/video/pwc/pwc-if.c b/drivers/media/video/pwc/pwc-if.c index db25c3034c1..8d17cf61330 100644 --- a/drivers/media/video/pwc/pwc-if.c +++ b/drivers/media/video/pwc/pwc-if.c @@ -62,6 +62,7 @@ #include #include #include +#include #ifdef CONFIG_USB_PWC_INPUT_EVDEV #include #endif diff --git a/drivers/media/video/pwc/pwc.h b/drivers/media/video/pwc/pwc.h index 0be6f814f53..0b658dee05a 100644 --- a/drivers/media/video/pwc/pwc.h +++ b/drivers/media/video/pwc/pwc.h @@ -29,7 +29,6 @@ #include #include #include -#include #include #include #include diff --git a/drivers/media/video/s2255drv.c b/drivers/media/video/s2255drv.c index 6be845ccc7d..9e3262c0ba3 100644 --- a/drivers/media/video/s2255drv.c +++ b/drivers/media/video/s2255drv.c @@ -48,6 +48,7 @@ #include #include #include +#include #include #include #include diff --git a/drivers/media/video/saa5246a.c b/drivers/media/video/saa5246a.c index 155804b061e..b624a4c01fd 100644 --- a/drivers/media/video/saa5246a.c +++ b/drivers/media/video/saa5246a.c @@ -43,7 +43,6 @@ #include #include #include -#include #include #include #include diff --git a/drivers/media/video/saa5249.c b/drivers/media/video/saa5249.c index 271d6e931b7..12835fb82c9 100644 --- a/drivers/media/video/saa5249.c +++ b/drivers/media/video/saa5249.c @@ -46,7 +46,6 @@ #include #include #include -#include #include #include #include diff --git a/drivers/media/video/saa7134/saa7134-empress.c b/drivers/media/video/saa7134/saa7134-empress.c index add1757f893..296788c3bf0 100644 --- a/drivers/media/video/saa7134/saa7134-empress.c +++ b/drivers/media/video/saa7134/saa7134-empress.c @@ -22,6 +22,7 @@ #include #include #include +#include #include #include "saa7134-reg.h" diff --git a/drivers/media/video/se401.c b/drivers/media/video/se401.c index c8f05297d0f..85ffc2cba03 100644 --- a/drivers/media/video/se401.c +++ b/drivers/media/video/se401.c @@ -31,6 +31,7 @@ static const char version[] = "0.24"; #include #include #include +#include #include #include #include "se401.h" diff --git a/drivers/media/video/stk-webcam.c b/drivers/media/video/stk-webcam.c index 2e593704727..4d6785e6345 100644 --- a/drivers/media/video/stk-webcam.c +++ b/drivers/media/video/stk-webcam.c @@ -27,6 +27,7 @@ #include #include #include +#include #include #include diff --git a/drivers/media/video/stradis.c b/drivers/media/video/stradis.c index 0eb313082c9..eaada39c76f 100644 --- a/drivers/media/video/stradis.c +++ b/drivers/media/video/stradis.c @@ -26,6 +26,7 @@ #include #include #include +#include #include #include #include diff --git a/drivers/media/video/stv680.c b/drivers/media/video/stv680.c index 75f286f7a2e..8b4e7dafce7 100644 --- a/drivers/media/video/stv680.c +++ b/drivers/media/video/stv680.c @@ -62,6 +62,7 @@ #include #include #include +#include #include #include #include diff --git a/drivers/media/video/usbvideo/vicam.c b/drivers/media/video/usbvideo/vicam.c index 8d73979596f..45fce39ec9a 100644 --- a/drivers/media/video/usbvideo/vicam.c +++ b/drivers/media/video/usbvideo/vicam.c @@ -43,6 +43,7 @@ #include #include #include +#include #include #include #include diff --git a/drivers/media/video/usbvision/usbvision-video.c b/drivers/media/video/usbvision/usbvision-video.c index 90b58914f98..90d9b5c0e9a 100644 --- a/drivers/media/video/usbvision/usbvision-video.c +++ b/drivers/media/video/usbvision/usbvision-video.c @@ -50,6 +50,7 @@ #include #include #include +#include #include #include #include diff --git a/drivers/media/video/v4l2-dev.c b/drivers/media/video/v4l2-dev.c index 31eac66411d..a7f1b69a7da 100644 --- a/drivers/media/video/v4l2-dev.c +++ b/drivers/media/video/v4l2-dev.c @@ -25,7 +25,6 @@ #include #include #include -#include #include #include diff --git a/drivers/media/video/zoran/zoran_driver.c b/drivers/media/video/zoran/zoran_driver.c index 3d7df32a3d8..bcdefb1bcb3 100644 --- a/drivers/media/video/zoran/zoran_driver.c +++ b/drivers/media/video/zoran/zoran_driver.c @@ -49,6 +49,7 @@ #include #include #include +#include #include #include #include diff --git a/drivers/misc/sgi-gru/grufile.c b/drivers/misc/sgi-gru/grufile.c index fa2d93a9fb8..aed609832bc 100644 --- a/drivers/misc/sgi-gru/grufile.c +++ b/drivers/misc/sgi-gru/grufile.c @@ -29,7 +29,6 @@ #include #include #include -#include #include #include #include diff --git a/drivers/misc/sgi-gru/grukservices.c b/drivers/misc/sgi-gru/grukservices.c index eedbf9c3276..79689b10f93 100644 --- a/drivers/misc/sgi-gru/grukservices.c +++ b/drivers/misc/sgi-gru/grukservices.c @@ -24,7 +24,6 @@ #include #include #include -#include #include #include #include diff --git a/drivers/net/irda/irtty-sir.c b/drivers/net/irda/irtty-sir.c index d53aa958213..20f9bc62668 100644 --- a/drivers/net/irda/irtty-sir.c +++ b/drivers/net/irda/irtty-sir.c @@ -31,7 +31,6 @@ #include #include #include -#include #include #include diff --git a/drivers/pci/hotplug/cpci_hotplug_core.c b/drivers/pci/hotplug/cpci_hotplug_core.c index a5b9f6ae507..d703e73fffa 100644 --- a/drivers/pci/hotplug/cpci_hotplug_core.c +++ b/drivers/pci/hotplug/cpci_hotplug_core.c @@ -32,7 +32,6 @@ #include #include #include -#include #include #include #include diff --git a/drivers/pci/hotplug/cpqphp_ctrl.c b/drivers/pci/hotplug/cpqphp_ctrl.c index 2fa47af992a..0ff689afa75 100644 --- a/drivers/pci/hotplug/cpqphp_ctrl.c +++ b/drivers/pci/hotplug/cpqphp_ctrl.c @@ -34,7 +34,6 @@ #include #include #include -#include #include #include #include diff --git a/drivers/pci/hotplug/cpqphp_sysfs.c b/drivers/pci/hotplug/cpqphp_sysfs.c index 8450f4a6568..e6089bdb6e5 100644 --- a/drivers/pci/hotplug/cpqphp_sysfs.c +++ b/drivers/pci/hotplug/cpqphp_sysfs.c @@ -33,6 +33,7 @@ #include #include #include +#include #include #include "cpqphp.h" diff --git a/drivers/pci/hotplug/pciehp_ctrl.c b/drivers/pci/hotplug/pciehp_ctrl.c index ff4034502d2..8aab8edf123 100644 --- a/drivers/pci/hotplug/pciehp_ctrl.c +++ b/drivers/pci/hotplug/pciehp_ctrl.c @@ -30,7 +30,6 @@ #include #include #include -#include #include #include #include "../pci.h" diff --git a/drivers/pci/syscall.c b/drivers/pci/syscall.c index ec22284eed3..e1c1ec54089 100644 --- a/drivers/pci/syscall.c +++ b/drivers/pci/syscall.c @@ -9,7 +9,6 @@ #include #include -#include #include #include #include "pci.h" diff --git a/drivers/s390/block/dasd_ioctl.c b/drivers/s390/block/dasd_ioctl.c index 4ce3f72ee1c..df918ef2796 100644 --- a/drivers/s390/block/dasd_ioctl.c +++ b/drivers/s390/block/dasd_ioctl.c @@ -16,6 +16,7 @@ #include #include #include +#include #include #include diff --git a/drivers/scsi/qla2xxx/qla_mid.c b/drivers/scsi/qla2xxx/qla_mid.c index 650bcef08f2..cd78c501803 100644 --- a/drivers/scsi/qla2xxx/qla_mid.c +++ b/drivers/scsi/qla2xxx/qla_mid.c @@ -9,7 +9,6 @@ #include #include -#include #include #include diff --git a/drivers/telephony/ixj.c b/drivers/telephony/ixj.c index a913efc6966..40de151f278 100644 --- a/drivers/telephony/ixj.c +++ b/drivers/telephony/ixj.c @@ -257,6 +257,7 @@ #include /* everything... */ #include /* error codes */ #include +#include #include #include #include diff --git a/drivers/telephony/phonedev.c b/drivers/telephony/phonedev.c index b52cc830c0b..f3873f650bb 100644 --- a/drivers/telephony/phonedev.c +++ b/drivers/telephony/phonedev.c @@ -23,7 +23,6 @@ #include #include #include -#include #include #include diff --git a/drivers/usb/class/cdc-wdm.c b/drivers/usb/class/cdc-wdm.c index 0fe434505ac..ba589d4ca8b 100644 --- a/drivers/usb/class/cdc-wdm.c +++ b/drivers/usb/class/cdc-wdm.c @@ -15,7 +15,6 @@ #include #include #include -#include #include #include #include diff --git a/drivers/usb/gadget/amd5536udc.c b/drivers/usb/gadget/amd5536udc.c index 826f3adde5d..77352ccc245 100644 --- a/drivers/usb/gadget/amd5536udc.c +++ b/drivers/usb/gadget/amd5536udc.c @@ -48,7 +48,6 @@ #include #include #include -#include #include #include #include diff --git a/drivers/usb/gadget/langwell_udc.c b/drivers/usb/gadget/langwell_udc.c index 6829d596135..a3913519fd5 100644 --- a/drivers/usb/gadget/langwell_udc.c +++ b/drivers/usb/gadget/langwell_udc.c @@ -34,7 +34,6 @@ #include #include #include -#include #include #include #include diff --git a/drivers/usb/gadget/s3c2410_udc.c b/drivers/usb/gadget/s3c2410_udc.c index 9a2b8920532..a9b452fe622 100644 --- a/drivers/usb/gadget/s3c2410_udc.c +++ b/drivers/usb/gadget/s3c2410_udc.c @@ -28,7 +28,6 @@ #include #include #include -#include #include #include #include diff --git a/drivers/usb/host/r8a66597-hcd.c b/drivers/usb/host/r8a66597-hcd.c index 56976cc0352..e18f74946e6 100644 --- a/drivers/usb/host/r8a66597-hcd.c +++ b/drivers/usb/host/r8a66597-hcd.c @@ -26,7 +26,6 @@ #include #include #include -#include #include #include #include diff --git a/drivers/usb/misc/iowarrior.c b/drivers/usb/misc/iowarrior.c index 3c5fe5cee05..90e1a8dedfa 100644 --- a/drivers/usb/misc/iowarrior.c +++ b/drivers/usb/misc/iowarrior.c @@ -18,6 +18,7 @@ #include #include #include +#include #include #include diff --git a/drivers/usb/misc/rio500.c b/drivers/usb/misc/rio500.c index deb95bb49fd..d645f3899fe 100644 --- a/drivers/usb/misc/rio500.c +++ b/drivers/usb/misc/rio500.c @@ -32,6 +32,7 @@ #include #include #include +#include #include #include #include diff --git a/drivers/usb/misc/usblcd.c b/drivers/usb/misc/usblcd.c index e0ff9ccd866..29092b8e59c 100644 --- a/drivers/usb/misc/usblcd.c +++ b/drivers/usb/misc/usblcd.c @@ -16,6 +16,7 @@ #include #include #include +#include #include #include #include diff --git a/drivers/usb/musb/cppi_dma.h b/drivers/usb/musb/cppi_dma.h index 8a39de3e6e4..59bf949e589 100644 --- a/drivers/usb/musb/cppi_dma.h +++ b/drivers/usb/musb/cppi_dma.h @@ -5,7 +5,6 @@ #include #include -#include #include #include diff --git a/drivers/usb/musb/musb_core.h b/drivers/usb/musb/musb_core.h index f3772ca3b2c..381d648a36b 100644 --- a/drivers/usb/musb/musb_core.h +++ b/drivers/usb/musb/musb_core.h @@ -38,7 +38,6 @@ #include #include #include -#include #include #include #include diff --git a/drivers/usb/serial/ftdi_sio.c b/drivers/usb/serial/ftdi_sio.c index 5f08702f672..5a8ae274d25 100644 --- a/drivers/usb/serial/ftdi_sio.c +++ b/drivers/usb/serial/ftdi_sio.c @@ -33,6 +33,7 @@ #include #include #include +#include #include #include #include diff --git a/drivers/usb/serial/mos7840.c b/drivers/usb/serial/mos7840.c index c40f95c1951..c31940a307f 100644 --- a/drivers/usb/serial/mos7840.c +++ b/drivers/usb/serial/mos7840.c @@ -26,6 +26,7 @@ #include #include #include +#include #include #include #include diff --git a/drivers/usb/serial/usb-serial.c b/drivers/usb/serial/usb-serial.c index a84216464ca..0c39b55aeef 100644 --- a/drivers/usb/serial/usb-serial.c +++ b/drivers/usb/serial/usb-serial.c @@ -21,6 +21,7 @@ #include #include #include +#include #include #include #include diff --git a/drivers/video/fbmem.c b/drivers/video/fbmem.c index 53ea05645ff..a85c818be94 100644 --- a/drivers/video/fbmem.c +++ b/drivers/video/fbmem.c @@ -16,7 +16,6 @@ #include #include #include -#include #include #include #include diff --git a/fs/adfs/super.c b/fs/adfs/super.c index aad92f0a104..6910a98bd73 100644 --- a/fs/adfs/super.c +++ b/fs/adfs/super.c @@ -13,6 +13,7 @@ #include #include #include +#include #include #include "adfs.h" #include "dir_f.h" diff --git a/fs/afs/super.c b/fs/afs/super.c index ad0514d0115..e1ea1c240b6 100644 --- a/fs/afs/super.c +++ b/fs/afs/super.c @@ -18,6 +18,7 @@ #include #include #include +#include #include #include #include diff --git a/fs/autofs4/dev-ioctl.c b/fs/autofs4/dev-ioctl.c index f3da2eb51f5..00bf8fcb245 100644 --- a/fs/autofs4/dev-ioctl.c +++ b/fs/autofs4/dev-ioctl.c @@ -19,7 +19,6 @@ #include #include #include -#include #include #include #include diff --git a/fs/bfs/dir.c b/fs/bfs/dir.c index 54bd07d44e6..1e41aadb106 100644 --- a/fs/bfs/dir.c +++ b/fs/bfs/dir.c @@ -8,7 +8,6 @@ #include #include #include -#include #include #include #include "bfs.h" diff --git a/fs/bfs/file.c b/fs/bfs/file.c index 6a021265f01..88b9a3ff44e 100644 --- a/fs/bfs/file.c +++ b/fs/bfs/file.c @@ -11,7 +11,6 @@ #include #include -#include #include "bfs.h" #undef DEBUG diff --git a/fs/btrfs/compression.c b/fs/btrfs/compression.c index de1e2fd3208..9d8ba4d54a3 100644 --- a/fs/btrfs/compression.c +++ b/fs/btrfs/compression.c @@ -26,7 +26,6 @@ #include #include #include -#include #include #include #include diff --git a/fs/btrfs/file.c b/fs/btrfs/file.c index 7c3cd248d8d..4b833972273 100644 --- a/fs/btrfs/file.c +++ b/fs/btrfs/file.c @@ -22,7 +22,6 @@ #include #include #include -#include #include #include #include diff --git a/fs/btrfs/inode.c b/fs/btrfs/inode.c index 7ffa3d34ea1..791eab19e33 100644 --- a/fs/btrfs/inode.c +++ b/fs/btrfs/inode.c @@ -26,7 +26,6 @@ #include #include #include -#include #include #include #include diff --git a/fs/btrfs/ioctl.c b/fs/btrfs/ioctl.c index 9f4db848db1..bd88f25889f 100644 --- a/fs/btrfs/ioctl.c +++ b/fs/btrfs/ioctl.c @@ -27,7 +27,6 @@ #include #include #include -#include #include #include #include diff --git a/fs/btrfs/super.c b/fs/btrfs/super.c index 9f179d4832d..6d6d06cb6df 100644 --- a/fs/btrfs/super.c +++ b/fs/btrfs/super.c @@ -26,7 +26,6 @@ #include #include #include -#include #include #include #include diff --git a/fs/char_dev.c b/fs/char_dev.c index b7c9d5187a7..a173551e19d 100644 --- a/fs/char_dev.c +++ b/fs/char_dev.c @@ -13,7 +13,6 @@ #include #include #include -#include #include #include diff --git a/fs/compat.c b/fs/compat.c index fbadb947727..94502dab972 100644 --- a/fs/compat.c +++ b/fs/compat.c @@ -32,7 +32,6 @@ #include #include #include -#include #include #include #include diff --git a/fs/compat_ioctl.c b/fs/compat_ioctl.c index 626c7483b4d..f28f070a60f 100644 --- a/fs/compat_ioctl.c +++ b/fs/compat_ioctl.c @@ -19,6 +19,7 @@ #include #include #include +#include #include #include #include diff --git a/fs/exofs/super.c b/fs/exofs/super.c index a343b4ea62f..5ab10c3bbeb 100644 --- a/fs/exofs/super.c +++ b/fs/exofs/super.c @@ -31,6 +31,7 @@ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA */ +#include #include #include #include diff --git a/fs/ext2/ioctl.c b/fs/ext2/ioctl.c index 7cb4badef92..e7431309bdc 100644 --- a/fs/ext2/ioctl.c +++ b/fs/ext2/ioctl.c @@ -13,7 +13,6 @@ #include #include #include -#include #include #include diff --git a/fs/ext4/ioctl.c b/fs/ext4/ioctl.c index bb415408fdb..24a6abb2aef 100644 --- a/fs/ext4/ioctl.c +++ b/fs/ext4/ioctl.c @@ -12,7 +12,6 @@ #include #include #include -#include #include #include #include diff --git a/fs/fat/dir.c b/fs/fat/dir.c index 38ff75a0fe2..530b4ca0151 100644 --- a/fs/fat/dir.c +++ b/fs/fat/dir.c @@ -16,7 +16,6 @@ #include #include #include -#include #include #include #include diff --git a/fs/fat/namei_msdos.c b/fs/fat/namei_msdos.c index 82f88733b68..bbc94ae4fd7 100644 --- a/fs/fat/namei_msdos.c +++ b/fs/fat/namei_msdos.c @@ -9,7 +9,6 @@ #include #include #include -#include #include "fat.h" /* Characters that are undesirable in an MS-DOS file name */ diff --git a/fs/fat/namei_vfat.c b/fs/fat/namei_vfat.c index 73471b7ecc8..cb6e8355711 100644 --- a/fs/fat/namei_vfat.c +++ b/fs/fat/namei_vfat.c @@ -19,7 +19,6 @@ #include #include #include -#include #include #include #include "fat.h" diff --git a/fs/fcntl.c b/fs/fcntl.c index a040b764f8e..ae413086db9 100644 --- a/fs/fcntl.c +++ b/fs/fcntl.c @@ -19,7 +19,6 @@ #include #include #include -#include #include #include diff --git a/fs/freevxfs/vxfs_super.c b/fs/freevxfs/vxfs_super.c index cdbd1654e4c..1e8af939b3e 100644 --- a/fs/freevxfs/vxfs_super.c +++ b/fs/freevxfs/vxfs_super.c @@ -38,6 +38,7 @@ #include #include #include +#include #include #include #include diff --git a/fs/hfs/super.c b/fs/hfs/super.c index 6f833dc8e91..f7fcbe49da7 100644 --- a/fs/hfs/super.c +++ b/fs/hfs/super.c @@ -19,6 +19,7 @@ #include #include #include +#include #include #include "hfs_fs.h" diff --git a/fs/hfsplus/super.c b/fs/hfsplus/super.c index 9fc3af0c0da..c0759fe0855 100644 --- a/fs/hfsplus/super.c +++ b/fs/hfsplus/super.c @@ -12,6 +12,7 @@ #include #include #include +#include #include #include diff --git a/fs/hpfs/dir.c b/fs/hpfs/dir.c index 6916c41d701..8865c94f55f 100644 --- a/fs/hpfs/dir.c +++ b/fs/hpfs/dir.c @@ -6,6 +6,7 @@ * directory VFS functions */ +#include #include "hpfs_fn.h" static int hpfs_dir_release(struct inode *inode, struct file *filp) diff --git a/fs/hpfs/file.c b/fs/hpfs/file.c index 64ab5225920..3efabff0036 100644 --- a/fs/hpfs/file.c +++ b/fs/hpfs/file.c @@ -6,6 +6,7 @@ * file VFS functions */ +#include #include "hpfs_fn.h" #define BLOCKS(size) (((size) + 511) >> 9) diff --git a/fs/hpfs/hpfs_fn.h b/fs/hpfs/hpfs_fn.h index c2ea31bae31..701ca54c086 100644 --- a/fs/hpfs/hpfs_fn.h +++ b/fs/hpfs/hpfs_fn.h @@ -13,7 +13,6 @@ #include #include #include -#include #include "hpfs.h" diff --git a/fs/hpfs/inode.c b/fs/hpfs/inode.c index 39a1bfbea31..fe703ae46bc 100644 --- a/fs/hpfs/inode.c +++ b/fs/hpfs/inode.c @@ -6,6 +6,7 @@ * inode VFS functions */ +#include #include "hpfs_fn.h" void hpfs_init_inode(struct inode *i) diff --git a/fs/hpfs/namei.c b/fs/hpfs/namei.c index b649232dde9..82b9c4ba9ed 100644 --- a/fs/hpfs/namei.c +++ b/fs/hpfs/namei.c @@ -6,6 +6,7 @@ * adding & removing files & directories */ #include +#include #include "hpfs_fn.h" static int hpfs_mkdir(struct inode *dir, struct dentry *dentry, int mode) diff --git a/fs/jffs2/super.c b/fs/jffs2/super.c index 07a22caf268..0035c021395 100644 --- a/fs/jffs2/super.c +++ b/fs/jffs2/super.c @@ -12,6 +12,7 @@ #include #include #include +#include #include #include #include diff --git a/fs/lockd/clntproc.c b/fs/lockd/clntproc.c index f2fdcbce143..4336adba952 100644 --- a/fs/lockd/clntproc.c +++ b/fs/lockd/clntproc.c @@ -7,6 +7,7 @@ */ #include +#include #include #include #include diff --git a/fs/lockd/svc4proc.c b/fs/lockd/svc4proc.c index 1725037374c..bd173a6ca3b 100644 --- a/fs/lockd/svc4proc.c +++ b/fs/lockd/svc4proc.c @@ -10,6 +10,7 @@ #include #include #include +#include #include #include #include diff --git a/fs/lockd/svcproc.c b/fs/lockd/svcproc.c index 3688e55901f..e1d28ddd216 100644 --- a/fs/lockd/svcproc.c +++ b/fs/lockd/svcproc.c @@ -10,6 +10,7 @@ #include #include #include +#include #include #include #include diff --git a/fs/nfs/delegation.c b/fs/nfs/delegation.c index af05b918cb5..6dd48a4405b 100644 --- a/fs/nfs/delegation.c +++ b/fs/nfs/delegation.c @@ -10,6 +10,7 @@ #include #include #include +#include #include #include diff --git a/fs/nfs/dir.c b/fs/nfs/dir.c index 89f98e9a024..38d42c29fb9 100644 --- a/fs/nfs/dir.c +++ b/fs/nfs/dir.c @@ -29,7 +29,6 @@ #include #include #include -#include #include #include #include diff --git a/fs/nfs/file.c b/fs/nfs/file.c index 0055b813ec2..05062329b67 100644 --- a/fs/nfs/file.c +++ b/fs/nfs/file.c @@ -26,7 +26,6 @@ #include #include #include -#include #include #include diff --git a/fs/nfs/inode.c b/fs/nfs/inode.c index 64f87194d39..bd7938eda6a 100644 --- a/fs/nfs/inode.c +++ b/fs/nfs/inode.c @@ -30,7 +30,6 @@ #include #include #include -#include #include #include #include diff --git a/fs/nfs/nfs4proc.c b/fs/nfs/nfs4proc.c index 92ce4351781..ff0c080db59 100644 --- a/fs/nfs/nfs4proc.c +++ b/fs/nfs/nfs4proc.c @@ -45,7 +45,6 @@ #include #include #include -#include #include #include #include diff --git a/fs/nfs/read.c b/fs/nfs/read.c index 96c4ebfa46f..73ea5e8d66c 100644 --- a/fs/nfs/read.c +++ b/fs/nfs/read.c @@ -18,7 +18,6 @@ #include #include #include -#include #include diff --git a/fs/nfsd/nfsctl.c b/fs/nfsd/nfsctl.c index 1250fb978ac..6d0847562d8 100644 --- a/fs/nfsd/nfsctl.c +++ b/fs/nfsd/nfsctl.c @@ -25,7 +25,6 @@ #include #include #include -#include #include #include diff --git a/fs/nfsd/nfssvc.c b/fs/nfsd/nfssvc.c index d4c9884cd54..492c79b7800 100644 --- a/fs/nfsd/nfssvc.c +++ b/fs/nfsd/nfssvc.c @@ -18,7 +18,6 @@ #include #include #include -#include #include #include #include diff --git a/fs/nilfs2/dir.c b/fs/nilfs2/dir.c index 54100acc110..1a4fa04cf07 100644 --- a/fs/nilfs2/dir.c +++ b/fs/nilfs2/dir.c @@ -43,7 +43,6 @@ */ #include -#include #include "nilfs.h" #include "page.h" diff --git a/fs/ocfs2/ioctl.c b/fs/ocfs2/ioctl.c index 9fcd36dcc9a..467b413bec2 100644 --- a/fs/ocfs2/ioctl.c +++ b/fs/ocfs2/ioctl.c @@ -7,7 +7,6 @@ #include #include -#include #define MLOG_MASK_PREFIX ML_INODE #include diff --git a/fs/reiserfs/xattr.c b/fs/reiserfs/xattr.c index f3d47d85684..6925b835a43 100644 --- a/fs/reiserfs/xattr.c +++ b/fs/reiserfs/xattr.c @@ -46,7 +46,6 @@ #include #include #include -#include #include #include diff --git a/fs/squashfs/super.c b/fs/squashfs/super.c index 3b52770f46f..cb5fc57e370 100644 --- a/fs/squashfs/super.c +++ b/fs/squashfs/super.c @@ -30,6 +30,7 @@ #include #include #include +#include #include #include #include diff --git a/fs/ubifs/ioctl.c b/fs/ubifs/ioctl.c index 6db7a6be6c9..8aacd64957a 100644 --- a/fs/ubifs/ioctl.c +++ b/fs/ubifs/ioctl.c @@ -25,7 +25,6 @@ /* This file implements EXT2-compatible extended attribute ioctl() calls */ #include -#include #include #include "ubifs.h" diff --git a/fs/xfs/linux-2.6/xfs_file.c b/fs/xfs/linux-2.6/xfs_file.c index f4e25544157..0542fd50764 100644 --- a/fs/xfs/linux-2.6/xfs_file.c +++ b/fs/xfs/linux-2.6/xfs_file.c @@ -41,7 +41,6 @@ #include "xfs_ioctl.h" #include -#include static struct vm_operations_struct xfs_file_vm_ops; diff --git a/include/linux/crash_dump.h b/include/linux/crash_dump.h index 2dac064d835..0026f267da2 100644 --- a/include/linux/crash_dump.h +++ b/include/linux/crash_dump.h @@ -3,7 +3,6 @@ #ifdef CONFIG_CRASH_DUMP #include -#include #include #include diff --git a/include/linux/hardirq.h b/include/linux/hardirq.h index 45257475623..8246c697863 100644 --- a/include/linux/hardirq.h +++ b/include/linux/hardirq.h @@ -2,7 +2,9 @@ #define LINUX_HARDIRQ_H #include +#ifdef CONFIG_PREEMPT #include +#endif #include #include #include diff --git a/include/linux/quotaops.h b/include/linux/quotaops.h index 7bc45759368..26361c4c037 100644 --- a/include/linux/quotaops.h +++ b/include/linux/quotaops.h @@ -7,7 +7,6 @@ #ifndef _LINUX_QUOTAOPS_ #define _LINUX_QUOTAOPS_ -#include #include static inline struct quota_info *sb_dqopt(struct super_block *sb) diff --git a/include/linux/sunrpc/xdr.h b/include/linux/sunrpc/xdr.h index d8910b68e1b..b99c625fddf 100644 --- a/include/linux/sunrpc/xdr.h +++ b/include/linux/sunrpc/xdr.h @@ -12,7 +12,6 @@ #include #include #include -#include /* * Buffer adjustment diff --git a/kernel/power/user.c b/kernel/power/user.c index ed97375daae..bf0014d6a5f 100644 --- a/kernel/power/user.c +++ b/kernel/power/user.c @@ -23,7 +23,6 @@ #include #include #include -#include #include #include diff --git a/kernel/trace/blktrace.c b/kernel/trace/blktrace.c index 39af8af6fc3..1090b0aed9b 100644 --- a/kernel/trace/blktrace.c +++ b/kernel/trace/blktrace.c @@ -22,6 +22,7 @@ #include #include #include +#include #include #include diff --git a/kernel/trace/trace.c b/kernel/trace/trace.c index 3aa0a0dfdfa..8bc8d8afea6 100644 --- a/kernel/trace/trace.c +++ b/kernel/trace/trace.c @@ -17,6 +17,7 @@ #include #include #include +#include #include #include #include diff --git a/net/appletalk/ddp.c b/net/appletalk/ddp.c index 590b8396362..bfbe13786bb 100644 --- a/net/appletalk/ddp.c +++ b/net/appletalk/ddp.c @@ -54,6 +54,7 @@ #include #include #include +#include #include /* For TIOCOUTQ/INQ */ #include #include diff --git a/net/ipx/af_ipx.c b/net/ipx/af_ipx.c index 417b0e30949..f1118d92a19 100644 --- a/net/ipx/af_ipx.c +++ b/net/ipx/af_ipx.c @@ -41,6 +41,7 @@ #include #include #include +#include #include #include #include diff --git a/net/irda/af_irda.c b/net/irda/af_irda.c index cb762c8723e..80cf29aae09 100644 --- a/net/irda/af_irda.c +++ b/net/irda/af_irda.c @@ -45,6 +45,7 @@ #include #include #include +#include #include #include #include diff --git a/net/irda/irnet/irnet.h b/net/irda/irnet/irnet.h index bccf4d0059f..b001c361ad3 100644 --- a/net/irda/irnet/irnet.h +++ b/net/irda/irnet/irnet.h @@ -241,7 +241,6 @@ #include #include -#include #include #include #include diff --git a/net/irda/irnet/irnet_ppp.c b/net/irda/irnet/irnet_ppp.c index 6d8ae03c14f..68cbcb19cbd 100644 --- a/net/irda/irnet/irnet_ppp.c +++ b/net/irda/irnet/irnet_ppp.c @@ -13,6 +13,7 @@ * 2) as a control channel (write commands, read events) */ +#include #include "irnet_ppp.h" /* Private header */ /* Please put other headers in irnet.h - Thanks */ diff --git a/net/sunrpc/clnt.c b/net/sunrpc/clnt.c index 5bc2f45bddf..ebfcf9b8990 100644 --- a/net/sunrpc/clnt.c +++ b/net/sunrpc/clnt.c @@ -28,7 +28,6 @@ #include #include #include -#include #include #include #include diff --git a/net/sunrpc/sched.c b/net/sunrpc/sched.c index 1102ce1251f..8f459abe97c 100644 --- a/net/sunrpc/sched.c +++ b/net/sunrpc/sched.c @@ -16,7 +16,6 @@ #include #include #include -#include #include #include diff --git a/net/sunrpc/svc_xprt.c b/net/sunrpc/svc_xprt.c index 6f33d33cc06..27d44332f01 100644 --- a/net/sunrpc/svc_xprt.c +++ b/net/sunrpc/svc_xprt.c @@ -5,6 +5,7 @@ */ #include +#include #include #include #include diff --git a/net/wanrouter/wanmain.c b/net/wanrouter/wanmain.c index 466e2d22d25..258daa80ad9 100644 --- a/net/wanrouter/wanmain.c +++ b/net/wanrouter/wanmain.c @@ -48,6 +48,7 @@ #include #include /* support for loadable modules */ #include /* kmalloc(), kfree() */ +#include #include #include /* inline mem*, str* functions */ diff --git a/net/x25/af_x25.c b/net/x25/af_x25.c index 21cdc872004..5e6c072c64d 100644 --- a/net/x25/af_x25.c +++ b/net/x25/af_x25.c @@ -40,6 +40,7 @@ #include #include #include +#include #include #include #include -- cgit v1.2.3 From dd0d9a46f573b086a67522f819566427dba9c4c7 Mon Sep 17 00:00:00 2001 From: Artem Bityutskiy Date: Thu, 9 Jul 2009 10:44:30 +0100 Subject: AFS: Fix compilation warning Fix the following warning: fs/afs/dir.c: In function 'afs_d_revalidate': fs/afs/dir.c:567: warning: 'fid.vnode' may be used uninitialized in this function fs/afs/dir.c:567: warning: 'fid.unique' may be used uninitialized in this function by marking the 'fid' variable as an uninitialized_var. The problem is that gcc doesn't always manage to work out that fid is always set on the path through the function that uses it. Cc: linux-afs@lists.infradead.org Cc: linux-kernel@vger.kernel.org Signed-off-by: Artem Bityutskiy Signed-off-by: David Howells Signed-off-by: Linus Torvalds --- fs/afs/dir.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/fs/afs/dir.c b/fs/afs/dir.c index 9bd757774c9..88067f36e5e 100644 --- a/fs/afs/dir.c +++ b/fs/afs/dir.c @@ -564,7 +564,7 @@ static struct dentry *afs_lookup(struct inode *dir, struct dentry *dentry, static int afs_d_revalidate(struct dentry *dentry, struct nameidata *nd) { struct afs_vnode *vnode, *dir; - struct afs_fid fid; + struct afs_fid uninitialized_var(fid); struct dentry *parent; struct key *key; void *dir_version; -- cgit v1.2.3 From eb8d3c604fe7496323efb9a858bef84c489ca584 Mon Sep 17 00:00:00 2001 From: Benjamin Herrenschmidt Date: Wed, 10 Jun 2009 12:43:02 -0700 Subject: devres: WARN() and return, don't crash on device_del() of uninitialized device I just debugged an obscure crash caused by a device_del() of a all NULL'd out struct device (in usb-serial) and found that a patch like this one would have saved me time (in addition to improved chances of a bug report from users hitting similar driver bugs). [akpm@linux-foundation.org: cleanup] Signed-off-by: Benjamin Herrenschmidt Cc: Kay Sievers Cc: Tejun Heo Signed-off-by: Andrew Morton Signed-off-by: Greg Kroah-Hartman --- drivers/base/devres.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/drivers/base/devres.c b/drivers/base/devres.c index e8beb8e5b62..05dd307e8f0 100644 --- a/drivers/base/devres.c +++ b/drivers/base/devres.c @@ -428,6 +428,9 @@ int devres_release_all(struct device *dev) { unsigned long flags; + /* Looks like an uninitialized device structure */ + if (WARN_ON(dev->devres_head.next == NULL)) + return -ENODEV; spin_lock_irqsave(&dev->devres_lock, flags); return release_nodes(dev, dev->devres_head.next, &dev->devres_head, flags); -- cgit v1.2.3 From f8c73c790c588fd70fda1632c8927a87b3d31dcd Mon Sep 17 00:00:00 2001 From: Heiko Carstens Date: Thu, 11 Jun 2009 15:14:40 +0200 Subject: partitions: fix broken uevent_suppress conversion git commit f67f129e "Driver core: implement uevent suppress in kobject" contains this chunk for fs/partitions/check.c: /* suppress uevent if the disk supresses it */ - if (!ddev->uevent_suppress) + if (!dev_get_uevent_suppress(pdev)) kobject_uevent(&pdev->kobj, KOBJ_ADD); However that should have been - if (!ddev->uevent_suppress) + if (!dev_get_uevent_suppress(ddev)) Signed-off-by: Heiko Carstens Acked-by: Ming Lei Cc: stable Signed-off-by: Greg Kroah-Hartman --- fs/partitions/check.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/fs/partitions/check.c b/fs/partitions/check.c index 1a9c7878f86..ea4e6cb29e1 100644 --- a/fs/partitions/check.c +++ b/fs/partitions/check.c @@ -436,7 +436,7 @@ struct hd_struct *add_partition(struct gendisk *disk, int partno, rcu_assign_pointer(ptbl->part[partno], p); /* suppress uevent if the disk supresses it */ - if (!dev_get_uevent_suppress(pdev)) + if (!dev_get_uevent_suppress(ddev)) kobject_uevent(&pdev->kobj, KOBJ_ADD); return p; -- cgit v1.2.3 From 08f42877aff6b966a386c47e0aeb98e7645db2a9 Mon Sep 17 00:00:00 2001 From: Kay Sievers Date: Thu, 2 Jul 2009 23:27:22 +0200 Subject: sparc: remove driver-core BUS_ID_SIZE The name size limit is gone from the driver-core, the BUS_ID_SIZE value will be removed. Cc: David S. Miller Signed-off-by: Kay Sievers Signed-off-by: Greg Kroah-Hartman --- arch/sparc/kernel/vio.c | 7 ++++++- 1 file changed, 6 insertions(+), 1 deletion(-) diff --git a/arch/sparc/kernel/vio.c b/arch/sparc/kernel/vio.c index 753d128ed15..c28c71449a6 100644 --- a/arch/sparc/kernel/vio.c +++ b/arch/sparc/kernel/vio.c @@ -224,7 +224,12 @@ static struct vio_dev *vio_create_one(struct mdesc_handle *hp, u64 mp, if (!strcmp(type, "domain-services-port")) bus_id_name = "ds"; - if (strlen(bus_id_name) >= BUS_ID_SIZE - 4) { + /* + * 20 char is the old driver-core name size limit, which is no more. + * This check can probably be removed after review and possible + * adaption of the vio users name length handling. + */ + if (strlen(bus_id_name) >= 20 - 4) { printk(KERN_ERR "VIO: bus_id_name [%s] is too long.\n", bus_id_name); return NULL; -- cgit v1.2.3 From 4ead0a2b6b3aa0b527871ec978c3ef12aafb6bfb Mon Sep 17 00:00:00 2001 From: Kay Sievers Date: Thu, 2 Jul 2009 23:25:44 +0200 Subject: Driver Core: remove BUS_ID_SIZE The name size limit is gone from the driver-core, this is the removal of the last left-over. Signed-off-by: Kay Sievers Signed-off-by: Greg Kroah-Hartman --- include/linux/device.h | 2 -- 1 file changed, 2 deletions(-) diff --git a/include/linux/device.h b/include/linux/device.h index ed4e39f2c42..aebb81036db 100644 --- a/include/linux/device.h +++ b/include/linux/device.h @@ -25,8 +25,6 @@ #include #include -#define BUS_ID_SIZE 20 - struct device; struct device_private; struct device_driver; -- cgit v1.2.3 From 308975fa7ab2a8e0b91186158128668c823790ce Mon Sep 17 00:00:00 2001 From: Jiri Slaby Date: Sun, 21 Jun 2009 23:57:31 +0200 Subject: Firmware: firmware_class, fix lock imbalance Add omitted unlock in firmware_data_read. Signed-off-by: Jiri Slaby Signed-off-by: Greg Kroah-Hartman --- drivers/base/firmware_class.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) diff --git a/drivers/base/firmware_class.c b/drivers/base/firmware_class.c index fc466531260..f285f441fab 100644 --- a/drivers/base/firmware_class.c +++ b/drivers/base/firmware_class.c @@ -217,8 +217,10 @@ firmware_data_read(struct kobject *kobj, struct bin_attribute *bin_attr, ret_count = -ENODEV; goto out; } - if (offset > fw->size) - return 0; + if (offset > fw->size) { + ret_count = 0; + goto out; + } if (count > fw->size - offset) count = fw->size - offset; -- cgit v1.2.3 From 909662e1e7290945fa3bca038bc3b7bb5d19499f Mon Sep 17 00:00:00 2001 From: vibi sreenivasan Date: Wed, 8 Jul 2009 15:37:03 -0700 Subject: driver model: fix show/store prototypes in doc. FIX prototypes for show & store method in struct driver_attribute Signed-off-by: vibi sreenivasan Signed-off-by: Randy Dunlap Signed-off-by: Greg Kroah-Hartman --- Documentation/driver-model/driver.txt | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/Documentation/driver-model/driver.txt b/Documentation/driver-model/driver.txt index 82132169d47..60120fb3b96 100644 --- a/Documentation/driver-model/driver.txt +++ b/Documentation/driver-model/driver.txt @@ -207,8 +207,8 @@ Attributes ~~~~~~~~~~ struct driver_attribute { struct attribute attr; - ssize_t (*show)(struct device_driver *, char * buf, size_t count, loff_t off); - ssize_t (*store)(struct device_driver *, const char * buf, size_t count, loff_t off); + ssize_t (*show)(struct device_driver *driver, char *buf); + ssize_t (*store)(struct device_driver *, const char * buf, size_t count); }; Device drivers can export attributes via their sysfs directories. -- cgit v1.2.3 From 864e1e8db436dfd784340d0aef18ea303d157bcb Mon Sep 17 00:00:00 2001 From: Greg Kroah-Hartman Date: Mon, 22 Jun 2009 15:46:03 -0700 Subject: Sound: remove direct access of driver_data This is the last in-kernel direct usage of driver_data, replace it with the proper dev_get/set_drvdata() calls. Cc: Takashi Iwai Cc: Jaroslav Kysela Acked-by: Mark Brown Cc: Liam Girdwood Signed-off-by: Greg Kroah-Hartman --- sound/soc/codecs/wm8988.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/sound/soc/codecs/wm8988.c b/sound/soc/codecs/wm8988.c index c05f71803aa..8c0fdf84aac 100644 --- a/sound/soc/codecs/wm8988.c +++ b/sound/soc/codecs/wm8988.c @@ -1037,14 +1037,14 @@ static int __devinit wm8988_spi_probe(struct spi_device *spi) codec->control_data = spi; codec->dev = &spi->dev; - spi->dev.driver_data = wm8988; + dev_set_drvdata(&spi->dev, wm8988); return wm8988_register(wm8988); } static int __devexit wm8988_spi_remove(struct spi_device *spi) { - struct wm8988_priv *wm8988 = spi->dev.driver_data; + struct wm8988_priv *wm8988 = dev_get_drvdata(&spi->dev); wm8988_unregister(wm8988); -- cgit v1.2.3 From 5e9a8bd65761bf0c1ee26d8514ef3e9ff22ee465 Mon Sep 17 00:00:00 2001 From: Greg Kroah-Hartman Date: Tue, 23 Jun 2009 08:31:46 -0700 Subject: omap: video: remove direct access of driver_data dev_set/get_drvdata() should be used instead, as driver_data is going away. Cc: Imre Deak Cc: Russell King Cc: Andrew Morton Acked-by: Trilok Soni Cc: Tony Lindgren Cc: Felipe Contreras Signed-off-by: Greg Kroah-Hartman --- drivers/video/omap/omapfb_main.c | 14 +++++++------- 1 file changed, 7 insertions(+), 7 deletions(-) diff --git a/drivers/video/omap/omapfb_main.c b/drivers/video/omap/omapfb_main.c index 4ea99bfc37b..8862233d57b 100644 --- a/drivers/video/omap/omapfb_main.c +++ b/drivers/video/omap/omapfb_main.c @@ -1254,7 +1254,7 @@ static struct fb_ops omapfb_ops = { static ssize_t omapfb_show_caps_num(struct device *dev, struct device_attribute *attr, char *buf) { - struct omapfb_device *fbdev = (struct omapfb_device *)dev->driver_data; + struct omapfb_device *fbdev = dev_get_drvdata(dev); int plane; size_t size; struct omapfb_caps caps; @@ -1274,7 +1274,7 @@ static ssize_t omapfb_show_caps_num(struct device *dev, static ssize_t omapfb_show_caps_text(struct device *dev, struct device_attribute *attr, char *buf) { - struct omapfb_device *fbdev = (struct omapfb_device *)dev->driver_data; + struct omapfb_device *fbdev = dev_get_drvdata(dev); int i; struct omapfb_caps caps; int plane; @@ -1321,7 +1321,7 @@ static DEVICE_ATTR(caps_text, 0444, omapfb_show_caps_text, NULL); static ssize_t omapfb_show_panel_name(struct device *dev, struct device_attribute *attr, char *buf) { - struct omapfb_device *fbdev = (struct omapfb_device *)dev->driver_data; + struct omapfb_device *fbdev = dev_get_drvdata(dev); return snprintf(buf, PAGE_SIZE, "%s\n", fbdev->panel->name); } @@ -1330,7 +1330,7 @@ static ssize_t omapfb_show_bklight_level(struct device *dev, struct device_attribute *attr, char *buf) { - struct omapfb_device *fbdev = (struct omapfb_device *)dev->driver_data; + struct omapfb_device *fbdev = dev_get_drvdata(dev); int r; if (fbdev->panel->get_bklight_level) { @@ -1345,7 +1345,7 @@ static ssize_t omapfb_store_bklight_level(struct device *dev, struct device_attribute *attr, const char *buf, size_t size) { - struct omapfb_device *fbdev = (struct omapfb_device *)dev->driver_data; + struct omapfb_device *fbdev = dev_get_drvdata(dev); int r; if (fbdev->panel->set_bklight_level) { @@ -1364,7 +1364,7 @@ static ssize_t omapfb_store_bklight_level(struct device *dev, static ssize_t omapfb_show_bklight_max(struct device *dev, struct device_attribute *attr, char *buf) { - struct omapfb_device *fbdev = (struct omapfb_device *)dev->driver_data; + struct omapfb_device *fbdev = dev_get_drvdata(dev); int r; if (fbdev->panel->get_bklight_level) { @@ -1397,7 +1397,7 @@ static struct attribute_group panel_attr_grp = { static ssize_t omapfb_show_ctrl_name(struct device *dev, struct device_attribute *attr, char *buf) { - struct omapfb_device *fbdev = (struct omapfb_device *)dev->driver_data; + struct omapfb_device *fbdev = dev_get_drvdata(dev); return snprintf(buf, PAGE_SIZE, "%s\n", fbdev->ctrl->name); } -- cgit v1.2.3 From 38c7dc373029e4666b17850054dd43c1c96bb264 Mon Sep 17 00:00:00 2001 From: Alexander Beregalov Date: Tue, 23 Jun 2009 17:50:06 +0400 Subject: wm97xx_batery: replace driver_data with dev_get_drvdata() direct access of driver_data is going away. Signed-off-by: Alexander Beregalov Signed-off-by: Greg Kroah-Hartman --- drivers/power/wm97xx_battery.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/power/wm97xx_battery.c b/drivers/power/wm97xx_battery.c index 8bde92126d3..b787335a841 100644 --- a/drivers/power/wm97xx_battery.c +++ b/drivers/power/wm97xx_battery.c @@ -33,14 +33,14 @@ static enum power_supply_property *prop; static unsigned long wm97xx_read_bat(struct power_supply *bat_ps) { - return wm97xx_read_aux_adc(bat_ps->dev->parent->driver_data, + return wm97xx_read_aux_adc(dev_get_drvdata(bat_ps->dev->parent), pdata->batt_aux) * pdata->batt_mult / pdata->batt_div; } static unsigned long wm97xx_read_temp(struct power_supply *bat_ps) { - return wm97xx_read_aux_adc(bat_ps->dev->parent->driver_data, + return wm97xx_read_aux_adc(dev_get_drvdata(bat_ps->dev->parent), pdata->temp_aux) * pdata->temp_mult / pdata->temp_div; } -- cgit v1.2.3 From 8dfb00571819ce491ce1760523d50e85bcd2185f Mon Sep 17 00:00:00 2001 From: Jorrit Schippers Date: Wed, 10 Jun 2009 15:34:26 +0200 Subject: Staging: rt2870: Add USB ID for Sitecom WL-608 Add the USB id 0x0DF6,0x003F to the rt2870.h file such that the Sitecom WL-608 device will be recognized by this driver. Signed-off-by: Jorrit Schippers Signed-off-by: Greg Kroah-Hartman --- drivers/staging/rt2870/rt2870.h | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/staging/rt2870/rt2870.h b/drivers/staging/rt2870/rt2870.h index 5e5b3f2b7eb..29e3b53e52a 100644 --- a/drivers/staging/rt2870/rt2870.h +++ b/drivers/staging/rt2870/rt2870.h @@ -89,6 +89,7 @@ {USB_DEVICE(0x0DF6,0x002C)}, /* Sitecom */ \ {USB_DEVICE(0x0DF6,0x002D)}, /* Sitecom */ \ {USB_DEVICE(0x0DF6,0x0039)}, /* Sitecom */ \ + {USB_DEVICE(0x0DF6,0x003F)}, /* Sitecom WL-608 */ \ {USB_DEVICE(0x14B2,0x3C06)}, /* Conceptronic */ \ {USB_DEVICE(0x14B2,0x3C28)}, /* Conceptronic */ \ {USB_DEVICE(0x2019,0xED06)}, /* Planex Communications, Inc. */ \ -- cgit v1.2.3 From f408adeb517e1b17102acd889251d5ab60c1fb88 Mon Sep 17 00:00:00 2001 From: Alan Cox Date: Wed, 10 Jun 2009 17:30:49 +0100 Subject: Staging: vt6655: compile fix At least make it compile Signed-off-by: Alan Cox Signed-off-by: Greg Kroah-Hartman --- drivers/staging/vt6655/device_main.c | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-) diff --git a/drivers/staging/vt6655/device_main.c b/drivers/staging/vt6655/device_main.c index a10ed27acbc..f43ca416e4a 100644 --- a/drivers/staging/vt6655/device_main.c +++ b/drivers/staging/vt6655/device_main.c @@ -344,7 +344,7 @@ static CHIP_INFO chip_info_table[]= { }; static struct pci_device_id device_id_table[] __devinitdata = { -{ 0x1106, 0x3253, PCI_ANY_ID, PCI_ANY_ID, 0, 0, (int)&chip_info_table[0]}, +{ 0x1106, 0x3253, PCI_ANY_ID, PCI_ANY_ID, 0, 0, (long)&chip_info_table[0]}, { 0, } }; #endif @@ -369,7 +369,7 @@ static int device_ioctl(struct net_device *dev, struct ifreq *rq, int cmd); #ifdef CONFIG_PM static int device_notify_reboot(struct notifier_block *, unsigned long event, void *ptr); -static int viawget_suspend(struct pci_dev *pcid, u32 state); +static int viawget_suspend(struct pci_dev *pcid, pm_message_t state); static int viawget_resume(struct pci_dev *pcid); struct notifier_block device_notifier = { notifier_call: device_notify_reboot, @@ -3941,7 +3941,7 @@ device_notify_reboot(struct notifier_block *nb, unsigned long event, void *p) while ((pdev = pci_get_device(PCI_ANY_ID, PCI_ANY_ID, pdev)) != NULL) { if(pci_dev_driver(pdev) == &device_driver) { if (pci_get_drvdata(pdev)) - viawget_suspend(pdev, 3); + viawget_suspend(pdev, PMSG_HIBERNATE); } } } @@ -3949,7 +3949,7 @@ device_notify_reboot(struct notifier_block *nb, unsigned long event, void *p) } static int -viawget_suspend(struct pci_dev *pcid, u32 state) +viawget_suspend(struct pci_dev *pcid, pm_message_t state) { int power_status; // to silence the compiler @@ -3971,7 +3971,7 @@ viawget_suspend(struct pci_dev *pcid, u32 state) memset(pMgmt->abyCurrBSSID, 0, 6); pMgmt->eCurrState = WMAC_STATE_IDLE; pci_disable_device(pcid); - power_status = pci_set_power_state(pcid, state); + power_status = pci_set_power_state(pcid, pci_choose_state(pcid, state)); spin_unlock_irq(&pDevice->lock); return 0; } -- cgit v1.2.3 From aea0d43bdec32cc4a7ba53d6c82616de3964357a Mon Sep 17 00:00:00 2001 From: Pete Zaitcev Date: Wed, 10 Jun 2009 14:44:14 -0600 Subject: Staging: rspiusb: use NULL virtual address instead of a bogus one The main problem here is that I just cannot see how this could ever be correct: usb_fill_bulk_urb(pdx->PixelUrb[frameInfo][i], pdx->udev, epAddr, (dma_addr_t *) sg_dma_address(&pdx->sgl[frameInfo][i]), sg_dma_len(&pdx->sgl[frameInfo][i]), You cannot take a DMA address, cast it to a _pointer to_ a DMA address, and then regard it as a virtual address of the transfer buffer. However, finding the right virtual address was too hard for me, so I just stubbed it with NULL. At least usbmon won't oops then (it will not show any data but it's better than crashing). Also, too big a buffer was allocated elsewhere. And since we're at it, drop clearly unnecessary usb_buffer_alloc too, leaving it where it may be useful. Signed-off-by: Pete Zaitcev Signed-off-by: Greg Kroah-Hartman --- drivers/staging/rspiusb/rspiusb.c | 14 ++++---------- 1 file changed, 4 insertions(+), 10 deletions(-) diff --git a/drivers/staging/rspiusb/rspiusb.c b/drivers/staging/rspiusb/rspiusb.c index 1cdfe69585e..2f8155c1968 100644 --- a/drivers/staging/rspiusb/rspiusb.c +++ b/drivers/staging/rspiusb/rspiusb.c @@ -444,8 +444,7 @@ static void piusb_write_bulk_callback(struct urb *urb) __func__, status); pdx->pendingWrite = 0; - usb_buffer_free(urb->dev, urb->transfer_buffer_length, - urb->transfer_buffer, urb->transfer_dma); + kfree(urb->transfer_buffer); } int piusb_output(struct ioctl_struct *io, unsigned char *uBuf, int len, @@ -457,9 +456,7 @@ int piusb_output(struct ioctl_struct *io, unsigned char *uBuf, int len, urb = usb_alloc_urb(0, GFP_KERNEL); if (urb != NULL) { - kbuf = - usb_buffer_alloc(pdx->udev, len, GFP_KERNEL, - &urb->transfer_dma); + kbuf = kmalloc(len, GFP_KERNEL); if (!kbuf) { dev_err(&pdx->udev->dev, "buffer_alloc failed\n"); return -ENOMEM; @@ -470,7 +467,6 @@ int piusb_output(struct ioctl_struct *io, unsigned char *uBuf, int len, } usb_fill_bulk_urb(urb, pdx->udev, pdx->hEP[io->endpoint], kbuf, len, piusb_write_bulk_callback, pdx); - urb->transfer_flags |= URB_NO_TRANSFER_DMA_MAP; err = usb_submit_urb(urb, GFP_KERNEL); if (err) { dev_err(&pdx->udev->dev, @@ -641,7 +637,7 @@ static int MapUserBuffer(struct ioctl_struct *io, struct device_extension *pdx) numPagesRequired = ((uaddr & ~PAGE_MASK) + count + ~PAGE_MASK) >> PAGE_SHIFT; dbg("Number of pages needed = %d", numPagesRequired); - maplist_p = vmalloc(numPagesRequired * sizeof(struct page)); + maplist_p = vmalloc(numPagesRequired * sizeof(struct page *)); if (!maplist_p) { dbg("Can't Allocate Memory for maplist_p"); return -ENOMEM; @@ -712,9 +708,7 @@ static int MapUserBuffer(struct ioctl_struct *io, struct device_extension *pdx) usb_fill_bulk_urb(pdx->PixelUrb[frameInfo][i], pdx->udev, epAddr, - (dma_addr_t *) sg_dma_address(&pdx-> - sgl[frameInfo] - [i]), + NULL, // non-DMA HC? buy a better hardware sg_dma_len(&pdx->sgl[frameInfo][i]), piusb_readPIXEL_callback, (void *)pdx); pdx->PixelUrb[frameInfo][i]->transfer_dma = -- cgit v1.2.3 From e5a85d2179d0150688c1c4343c3c1b4a71bf6588 Mon Sep 17 00:00:00 2001 From: Greg Kroah-Hartman Date: Thu, 2 Jul 2009 12:55:39 -0700 Subject: Staging: meilhaus: add email address to TODO Meilhaus Support also wants to be notified of changes to these drivers. Cc: David Kiliani Cc: Meilhaus Support Signed-off-by: Greg Kroah-Hartman --- drivers/staging/meilhaus/TODO | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/staging/meilhaus/TODO b/drivers/staging/meilhaus/TODO index 6ec25203089..d6ce39823de 100644 --- a/drivers/staging/meilhaus/TODO +++ b/drivers/staging/meilhaus/TODO @@ -7,4 +7,4 @@ TODO: - possible comedi merge Please send cleanup patches to Greg Kroah-Hartman -and CC: David Kiliani +and CC: David Kiliani and Meilhaus Support -- cgit v1.2.3 From 9b5de0a0a79111445d99ff7e4c6c1125523f84df Mon Sep 17 00:00:00 2001 From: Alexander Beregalov Date: Sat, 20 Jun 2009 03:52:47 +0400 Subject: Staging: comedi: jr3_pci.c: add required includes Fix this build errors: jr3_pci.c:739: error: 'jiffies' undeclared jr3_pci.c:748: error: implicit declaration of function 'msecs_to_jiffies' jr3_pci.c:763: error: implicit declaration of function 'add_timer' jr3_pci.c:790: error: implicit declaration of function 'init_timer' jr3_pci.c:951: error: implicit declaration of function 'del_timer_sync' Signed-off-by: Alexander Beregalov Signed-off-by: Greg Kroah-Hartman --- drivers/staging/comedi/drivers/jr3_pci.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/staging/comedi/drivers/jr3_pci.c b/drivers/staging/comedi/drivers/jr3_pci.c index baf83c6a941..e3c3adc282e 100644 --- a/drivers/staging/comedi/drivers/jr3_pci.c +++ b/drivers/staging/comedi/drivers/jr3_pci.c @@ -45,6 +45,8 @@ Devices: [JR3] PCI force sensor board (jr3_pci) #include #include #include +#include +#include #include "comedi_pci.h" #include "jr3_pci.h" -- cgit v1.2.3 From d9dea3c1c0814a87cc579b425e9776b8ed46b31f Mon Sep 17 00:00:00 2001 From: Bill Pemberton Date: Fri, 19 Jun 2009 12:32:56 -0400 Subject: Staging: serqt_usb2: fix qt_close parameters in serqt_usb2 The parameter list for qt_close() was from the old non usb-serial driver. Signed-off-by: Bill Pemberton Signed-off-by: Greg Kroah-Hartman --- drivers/staging/serqt_usb2/serqt_usb2.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) diff --git a/drivers/staging/serqt_usb2/serqt_usb2.c b/drivers/staging/serqt_usb2/serqt_usb2.c index 90b29b56463..4e5db192e2d 100644 --- a/drivers/staging/serqt_usb2/serqt_usb2.c +++ b/drivers/staging/serqt_usb2/serqt_usb2.c @@ -1041,17 +1041,19 @@ static void qt_block_until_empty(struct tty_struct *tty, } } -static void qt_close(struct tty_struct *tty, struct usb_serial_port *port, - struct file *filp) +static void qt_close( struct usb_serial_port *port) { struct usb_serial *serial = port->serial; struct quatech_port *qt_port; struct quatech_port *port0; + struct tty_struct *tty; int status; unsigned int index; status = 0; dbg("%s - port %d\n", __func__, port->number); + + tty = tty_port_tty_get(&port->port); index = tty->index - serial->minor; qt_port = qt_get_port_private(port); -- cgit v1.2.3 From 35e2bed559ab80641f1764aae570d92711ddc2fa Mon Sep 17 00:00:00 2001 From: Bill Pemberton Date: Fri, 19 Jun 2009 12:32:57 -0400 Subject: Staging: serqt_usb2: declare qt_open static in serqt_usb2 Signed-off-by: Bill Pemberton Signed-off-by: Greg Kroah-Hartman --- drivers/staging/serqt_usb2/serqt_usb2.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/staging/serqt_usb2/serqt_usb2.c b/drivers/staging/serqt_usb2/serqt_usb2.c index 4e5db192e2d..a9bd4106beb 100644 --- a/drivers/staging/serqt_usb2/serqt_usb2.c +++ b/drivers/staging/serqt_usb2/serqt_usb2.c @@ -866,7 +866,7 @@ static void qt_release(struct usb_serial *serial) } -int qt_open(struct tty_struct *tty, +static int qt_open(struct tty_struct *tty, struct usb_serial_port *port, struct file *filp) { struct usb_serial *serial; -- cgit v1.2.3 From 77b9288197b6034c44abe2619aff62cba056a713 Mon Sep 17 00:00:00 2001 From: Bartlomiej Zolnierkiewicz Date: Thu, 11 Jun 2009 20:49:07 +0200 Subject: Staging: rtl8192su: convert to net_device_ops commit e3804cbebb67887879102925961d41b503f7fbe3 removed COMPAT_NET_DEV_OPS so this change is needed to make rtl8192su buildable again. Loosely based on Alexander's patch for rtl8187se, untested. Cc: Alexander Beregalov Cc: David S. Miller Signed-off-by: Bartlomiej Zolnierkiewicz Signed-off-by: Greg Kroah-Hartman --- drivers/staging/rtl8192su/Kconfig | 2 +- .../staging/rtl8192su/ieee80211/ieee80211_module.c | 1 - drivers/staging/rtl8192su/r8192U_core.c | 23 +++++++++++++--------- drivers/staging/rtl8192su/r8192U_pm.c | 8 ++++++-- 4 files changed, 21 insertions(+), 13 deletions(-) diff --git a/drivers/staging/rtl8192su/Kconfig b/drivers/staging/rtl8192su/Kconfig index 4b5552c5926..770f41280f2 100644 --- a/drivers/staging/rtl8192su/Kconfig +++ b/drivers/staging/rtl8192su/Kconfig @@ -1,6 +1,6 @@ config RTL8192SU tristate "RealTek RTL8192SU Wireless LAN NIC driver" depends on PCI - depends on WIRELESS_EXT && COMPAT_NET_DEV_OPS + depends on WIRELESS_EXT default N ---help--- diff --git a/drivers/staging/rtl8192su/ieee80211/ieee80211_module.c b/drivers/staging/rtl8192su/ieee80211/ieee80211_module.c index f408b4583b8..759032db4a3 100644 --- a/drivers/staging/rtl8192su/ieee80211/ieee80211_module.c +++ b/drivers/staging/rtl8192su/ieee80211/ieee80211_module.c @@ -118,7 +118,6 @@ struct net_device *alloc_ieee80211(int sizeof_priv) #else ieee = (struct ieee80211_device *)dev->priv; #endif - dev->hard_start_xmit = ieee80211_xmit; memset(ieee, 0, sizeof(struct ieee80211_device)+sizeof_priv); ieee->dev = dev; diff --git a/drivers/staging/rtl8192su/r8192U_core.c b/drivers/staging/rtl8192su/r8192U_core.c index f1423d71449..4ab250743e8 100644 --- a/drivers/staging/rtl8192su/r8192U_core.c +++ b/drivers/staging/rtl8192su/r8192U_core.c @@ -12132,6 +12132,19 @@ static void HalUsbSetQueuePipeMapping8192SUsb(struct usb_interface *intf, struct } #endif +static const struct net_device_ops rtl8192_netdev_ops = { + .ndo_open = rtl8192_open, + .ndo_stop = rtl8192_close, + .ndo_get_stats = rtl8192_stats, + .ndo_tx_timeout = tx_timeout, + .ndo_do_ioctl = rtl8192_ioctl, + .ndo_set_multicast_list = r8192_set_multicast, + .ndo_set_mac_address = r8192_set_mac_adr, + .ndo_validate_addr = eth_validate_addr, + .ndo_change_mtu = eth_change_mtu, + .ndo_start_xmit = ieee80211_xmit, +}; + #if LINUX_VERSION_CODE > KERNEL_VERSION(2,5,0) static int __devinit rtl8192_usb_probe(struct usb_interface *intf, const struct usb_device_id *id) @@ -12186,15 +12199,7 @@ static void * __devinit rtl8192_usb_probe(struct usb_device *udev, priv->ops = &rtl8192u_ops; #endif - dev->open = rtl8192_open; - dev->stop = rtl8192_close; - //dev->hard_start_xmit = rtl8192_8023_hard_start_xmit; - dev->tx_timeout = tx_timeout; - //dev->wireless_handlers = &r8192_wx_handlers_def; - dev->do_ioctl = rtl8192_ioctl; - dev->set_multicast_list = r8192_set_multicast; - dev->set_mac_address = r8192_set_mac_adr; - dev->get_stats = rtl8192_stats; + dev->netdev_ops = &rtl8192_netdev_ops; //DMESG("Oops: i'm coming\n"); #if WIRELESS_EXT >= 12 diff --git a/drivers/staging/rtl8192su/r8192U_pm.c b/drivers/staging/rtl8192su/r8192U_pm.c index 92c95aa3663..b1531a8d0cd 100644 --- a/drivers/staging/rtl8192su/r8192U_pm.c +++ b/drivers/staging/rtl8192su/r8192U_pm.c @@ -35,7 +35,9 @@ int rtl8192U_suspend(struct usb_interface *intf, pm_message_t state) return 0; } - dev->stop(dev); + if (dev->netdev_ops->ndo_stop) + dev->netdev_ops->ndo_stop(dev); + mdelay(10); netif_device_detach(dev); @@ -61,7 +63,9 @@ int rtl8192U_resume (struct usb_interface *intf) } netif_device_attach(dev); - dev->open(dev); + + if (dev->netdev_ops->ndo_open) + dev->netdev_ops->ndo_open(dev); } return 0; -- cgit v1.2.3 From 02c8baecf5d8850dba40b47cdf003ed2e04e66dd Mon Sep 17 00:00:00 2001 From: Dan Aloni Date: Sat, 20 Jun 2009 16:32:22 +0300 Subject: Staging: prevent rtl8187se from crashing dev_ioctl() in SIOCGIWNAME I repeatedly get __stack_chk_fail panic()s with this driver before applying the attached fix. ieee80211_wx_get_name() ignores sizeof(wrqu->name) which is IFNAMSIZ (16), and on certain conditions, the concatenated string will be larger than IFNAMSIZ including the terminating zero. length ("802.11" ++ "b" ++ "/g" ++ " linked" ++ "\x00") == 17 This fix uses strl{cpy,cat} in addition to the reduction of the total possible length of the output string by a char. It can be applied to 2.6.30-stable as well. Signed-off-by: Dan Aloni Cc: Bartlomiej Zolnierkiewicz Cc: stable Signed-off-by: Greg Kroah-Hartman --- drivers/staging/rtl8187se/ieee80211/ieee80211_softmac_wx.c | 12 ++++++------ 1 file changed, 6 insertions(+), 6 deletions(-) diff --git a/drivers/staging/rtl8187se/ieee80211/ieee80211_softmac_wx.c b/drivers/staging/rtl8187se/ieee80211/ieee80211_softmac_wx.c index 93af37e2d31..54b4b718f84 100644 --- a/drivers/staging/rtl8187se/ieee80211/ieee80211_softmac_wx.c +++ b/drivers/staging/rtl8187se/ieee80211/ieee80211_softmac_wx.c @@ -461,19 +461,19 @@ int ieee80211_wx_get_name(struct ieee80211_device *ieee, struct iw_request_info *info, union iwreq_data *wrqu, char *extra) { - strcpy(wrqu->name, "802.11"); + strlcpy(wrqu->name, "802.11", IFNAMSIZ); if(ieee->modulation & IEEE80211_CCK_MODULATION){ - strcat(wrqu->name, "b"); + strlcat(wrqu->name, "b", IFNAMSIZ); if(ieee->modulation & IEEE80211_OFDM_MODULATION) - strcat(wrqu->name, "/g"); + strlcat(wrqu->name, "/g", IFNAMSIZ); }else if(ieee->modulation & IEEE80211_OFDM_MODULATION) - strcat(wrqu->name, "g"); + strlcat(wrqu->name, "g", IFNAMSIZ); if((ieee->state == IEEE80211_LINKED) || (ieee->state == IEEE80211_LINKED_SCANNING)) - strcat(wrqu->name," linked"); + strlcat(wrqu->name," link", IFNAMSIZ); else if(ieee->state != IEEE80211_NOLINK) - strcat(wrqu->name," link.."); + strlcat(wrqu->name," .....", IFNAMSIZ); return 0; -- cgit v1.2.3 From 91fca6da389b897483b4c1edea29885172989fda Mon Sep 17 00:00:00 2001 From: Dan Aloni Date: Wed, 24 Jun 2009 22:34:39 +0300 Subject: Staging: prevent rtl8192su from crashing dev_ioctl in SIOCGIWNAME (adapted from the rtl8187se patch) ieee80211_wx_get_name() ignores sizeof(wrqu->name) which is IFNAMSIZ (16), and on certain conditions, the concatenated string will be larger than IFNAMSIZ including the terminating zero. length ("802.11" ++ "b" ++ "/g" ++ " linked" ++ "\x00") == 17 This fix uses strl{cpy,cat} in addition to the reduction of the total possible length of the output string by a char. It can be applied to 2.6.30-stable as well. Signed-off-by: Dan Aloni Cc: Bartlomiej Zolnierkiewicz Cc: stable Signed-off-by: Greg Kroah-Hartman --- drivers/staging/rtl8192su/ieee80211/ieee80211_softmac_wx.c | 14 +++++++------- 1 file changed, 7 insertions(+), 7 deletions(-) diff --git a/drivers/staging/rtl8192su/ieee80211/ieee80211_softmac_wx.c b/drivers/staging/rtl8192su/ieee80211/ieee80211_softmac_wx.c index 1f50c46dcb9..191dc3fbbe3 100644 --- a/drivers/staging/rtl8192su/ieee80211/ieee80211_softmac_wx.c +++ b/drivers/staging/rtl8192su/ieee80211/ieee80211_softmac_wx.c @@ -548,21 +548,21 @@ int ieee80211_wx_get_name(struct ieee80211_device *ieee, struct iw_request_info *info, union iwreq_data *wrqu, char *extra) { - strcpy(wrqu->name, "802.11"); + strlcpy(wrqu->name, "802.11", IFNAMSIZ); if(ieee->modulation & IEEE80211_CCK_MODULATION){ - strcat(wrqu->name, "b"); + strlcat(wrqu->name, "b", IFNAMSIZ); if(ieee->modulation & IEEE80211_OFDM_MODULATION) - strcat(wrqu->name, "/g"); + strlcat(wrqu->name, "/g", IFNAMSIZ); }else if(ieee->modulation & IEEE80211_OFDM_MODULATION) - strcat(wrqu->name, "g"); + strlcat(wrqu->name, "g", IFNAMSIZ); if (ieee->mode & (IEEE_N_24G | IEEE_N_5G)) - strcat(wrqu->name, "/n"); + strlcat(wrqu->name, "/n", IFNAMSIZ); if((ieee->state == IEEE80211_LINKED) || (ieee->state == IEEE80211_LINKED_SCANNING)) - strcat(wrqu->name," linked"); + strlcat(wrqu->name, " link", IFNAMSIZ); else if(ieee->state != IEEE80211_NOLINK) - strcat(wrqu->name," link.."); + strlcat(wrqu->name, " .....", IFNAMSIZ); return 0; -- cgit v1.2.3 From 8231eb5672e7a020174eb7ce0436766eea57cae8 Mon Sep 17 00:00:00 2001 From: Herton Ronaldo Krzesinski Date: Thu, 18 Jun 2009 14:43:56 -0300 Subject: Staging: comedi: s626: use subvendor:subdevice ids for SAA7146 board The current s626 comedi driver in staging conflicts with philips SAA7146 media/dvb based cards, because it claims the same vendor:device pci id for all subdevice/subvendor ids. What happens is that for people that have a philips SAA7146 media/dvb based card, s626 if available gets loaded by udev and makes system freeze (https://qa.mandriva.com/show_bug.cgi?id=51445). The s626 driver shouldn't claim all 1131:7146 devices. Fix this by specifying specific known subvendor:subdevice ids in its pci id table list. Also s626_attach is modified to use now pci_get_subsys instead of pci_get_device as reported by Ian Abbott, and now we loop over pci id table entries in case more ids are added in the future. Reference: http://lkml.org/lkml/2009/6/16/552 Signed-off-by: Herton Ronaldo Krzesinski Signed-off-by: Ian Abbott Signed-off-by: Greg Kroah-Hartman --- drivers/staging/comedi/drivers/s626.c | 35 ++++++++++++++++++++--------------- 1 file changed, 20 insertions(+), 15 deletions(-) diff --git a/drivers/staging/comedi/drivers/s626.c b/drivers/staging/comedi/drivers/s626.c index 92121cf8c45..5d9bab352c1 100644 --- a/drivers/staging/comedi/drivers/s626.c +++ b/drivers/staging/comedi/drivers/s626.c @@ -111,9 +111,13 @@ static const struct s626_board s626_boards[] = { #define PCI_VENDOR_ID_S626 0x1131 #define PCI_DEVICE_ID_S626 0x7146 +/* + * For devices with vendor:device id == 0x1131:0x7146 you must specify + * also subvendor:subdevice ids, because otherwise it will conflict with + * Philips SAA7146 media/dvb based cards. + */ static DEFINE_PCI_DEVICE_TABLE(s626_pci_table) = { - {PCI_VENDOR_ID_S626, PCI_DEVICE_ID_S626, PCI_ANY_ID, PCI_ANY_ID, 0, 0, - 0}, + {PCI_VENDOR_ID_S626, PCI_DEVICE_ID_S626, 0x6000, 0x0272, 0, 0, 0}, {0} }; @@ -499,25 +503,26 @@ static int s626_attach(struct comedi_device *dev, struct comedi_devconfig *it) resource_size_t resourceStart; dma_addr_t appdma; struct comedi_subdevice *s; - struct pci_dev *pdev; + const struct pci_device_id *ids; + struct pci_dev *pdev = NULL; if (alloc_private(dev, sizeof(struct s626_private)) < 0) return -ENOMEM; - for (pdev = pci_get_device(PCI_VENDOR_ID_S626, PCI_DEVICE_ID_S626, - NULL); pdev != NULL; - pdev = pci_get_device(PCI_VENDOR_ID_S626, - PCI_DEVICE_ID_S626, pdev)) { - if (it->options[0] || it->options[1]) { - if (pdev->bus->number == it->options[0] && - PCI_SLOT(pdev->devfn) == it->options[1]) { + for (i = 0; i < (ARRAY_SIZE(s626_pci_table) - 1) && !pdev; i++) { + ids = &s626_pci_table[i]; + do { + pdev = pci_get_subsys(ids->vendor, ids->device, ids->subvendor, + ids->subdevice, pdev); + + if ((it->options[0] || it->options[1]) && pdev) { /* matches requested bus/slot */ + if (pdev->bus->number == it->options[0] && + PCI_SLOT(pdev->devfn) == it->options[1]) + break; + } else break; - } - } else { - /* no bus/slot specified */ - break; - } + } while (1); } devpriv->pdev = pdev; -- cgit v1.2.3 From f6387184f5196242edecbb5385bcc3481fae212a Mon Sep 17 00:00:00 2001 From: Alexander Beregalov Date: Sat, 20 Jun 2009 20:58:33 +0400 Subject: Staging: stlc45xx: convert config_interface to bss_info_changed, fixing a build error See commit 2d0ddec5b2b (mac80211: unify config_interface and bss_info_changed) This fixes a build error. Signed-off-by: Alexander Beregalov Signed-off-by: Greg Kroah-Hartman --- drivers/staging/stlc45xx/stlc45xx.c | 27 ++++++++------------------- 1 file changed, 8 insertions(+), 19 deletions(-) diff --git a/drivers/staging/stlc45xx/stlc45xx.c b/drivers/staging/stlc45xx/stlc45xx.c index cfdaac9b747..a137c78fac0 100644 --- a/drivers/staging/stlc45xx/stlc45xx.c +++ b/drivers/staging/stlc45xx/stlc45xx.c @@ -2235,24 +2235,6 @@ static void stlc45xx_op_remove_interface(struct ieee80211_hw *hw, stlc45xx_debug(DEBUG_FUNC, "%s", __func__); } -static int stlc45xx_op_config_interface(struct ieee80211_hw *hw, - struct ieee80211_vif *vif, - struct ieee80211_if_conf *conf) -{ - struct stlc45xx *stlc = hw->priv; - - stlc45xx_debug(DEBUG_FUNC, "%s", __func__); - - mutex_lock(&stlc->mutex); - - memcpy(stlc->bssid, conf->bssid, ETH_ALEN); - stlc45xx_tx_setup(stlc); - - mutex_unlock(&stlc->mutex); - - return 0; -} - static int stlc45xx_op_config(struct ieee80211_hw *hw, u32 changed) { struct stlc45xx *stlc = hw->priv; @@ -2295,6 +2277,14 @@ static void stlc45xx_op_bss_info_changed(struct ieee80211_hw *hw, { struct stlc45xx *stlc = hw->priv; + stlc45xx_debug(DEBUG_FUNC, "%s", __func__); + mutex_lock(&stlc->mutex); + + memcpy(stlc->bssid, info->bssid, ETH_ALEN); + stlc45xx_tx_setup(stlc); + + mutex_unlock(&stlc->mutex); + if (changed & BSS_CHANGED_ASSOC) { stlc->associated = info->assoc; if (info->assoc) @@ -2357,7 +2347,6 @@ static const struct ieee80211_ops stlc45xx_ops = { .add_interface = stlc45xx_op_add_interface, .remove_interface = stlc45xx_op_remove_interface, .config = stlc45xx_op_config, - .config_interface = stlc45xx_op_config_interface, .configure_filter = stlc45xx_op_configure_filter, .tx = stlc45xx_op_tx, .bss_info_changed = stlc45xx_op_bss_info_changed, -- cgit v1.2.3 From 240c102d9c54fee7fdc87a4ef2fabc7eb539e00a Mon Sep 17 00:00:00 2001 From: Ben Hutchings Date: Thu, 9 Jul 2009 17:54:35 +0000 Subject: netdev: restore MAC address set and validate operations alloc_etherdev() used to install default implementations of these operations, but they must now be explicitly installed in struct net_device_ops. Signed-off-by: Ben Hutchings Signed-off-by: David S. Miller --- drivers/net/arm/ixp4xx_eth.c | 3 ++- drivers/net/ehea/ehea_main.c | 1 + drivers/net/gianfar.c | 2 ++ drivers/net/plip.c | 2 ++ drivers/net/ps3_gelic_net.c | 1 + drivers/net/ps3_gelic_wireless.c | 1 + drivers/net/sunvnet.c | 1 + drivers/net/usb/kaweth.c | 2 ++ drivers/net/usb/pegasus.c | 2 ++ drivers/net/wireless/orinoco/main.c | 3 ++- 10 files changed, 16 insertions(+), 2 deletions(-) diff --git a/drivers/net/arm/ixp4xx_eth.c b/drivers/net/arm/ixp4xx_eth.c index 6f42ad72891..87fde32447d 100644 --- a/drivers/net/arm/ixp4xx_eth.c +++ b/drivers/net/arm/ixp4xx_eth.c @@ -1142,7 +1142,8 @@ static const struct net_device_ops ixp4xx_netdev_ops = { .ndo_start_xmit = eth_xmit, .ndo_set_multicast_list = eth_set_mcast_list, .ndo_do_ioctl = eth_ioctl, - + .ndo_set_mac_address = eth_mac_addr, + .ndo_validate_addr = eth_validate_addr, }; static int __devinit eth_init_one(struct platform_device *pdev) diff --git a/drivers/net/ehea/ehea_main.c b/drivers/net/ehea/ehea_main.c index 147c4b088fb..c7d188607c2 100644 --- a/drivers/net/ehea/ehea_main.c +++ b/drivers/net/ehea/ehea_main.c @@ -3081,6 +3081,7 @@ static const struct net_device_ops ehea_netdev_ops = { #endif .ndo_get_stats = ehea_get_stats, .ndo_set_mac_address = ehea_set_mac_addr, + .ndo_validate_addr = eth_validate_addr, .ndo_set_multicast_list = ehea_set_multicast_list, .ndo_change_mtu = ehea_change_mtu, .ndo_vlan_rx_register = ehea_vlan_rx_register, diff --git a/drivers/net/gianfar.c b/drivers/net/gianfar.c index 4ae1d259fce..43d813ed9f4 100644 --- a/drivers/net/gianfar.c +++ b/drivers/net/gianfar.c @@ -156,6 +156,8 @@ static const struct net_device_ops gfar_netdev_ops = { .ndo_tx_timeout = gfar_timeout, .ndo_do_ioctl = gfar_ioctl, .ndo_vlan_rx_register = gfar_vlan_rx_register, + .ndo_set_mac_address = eth_mac_addr, + .ndo_validate_addr = eth_validate_addr, #ifdef CONFIG_NET_POLL_CONTROLLER .ndo_poll_controller = gfar_netpoll, #endif diff --git a/drivers/net/plip.c b/drivers/net/plip.c index 7a62f781fef..b79f7768a40 100644 --- a/drivers/net/plip.c +++ b/drivers/net/plip.c @@ -270,6 +270,8 @@ static const struct net_device_ops plip_netdev_ops = { .ndo_stop = plip_close, .ndo_start_xmit = plip_tx_packet, .ndo_do_ioctl = plip_ioctl, + .ndo_set_mac_address = eth_mac_addr, + .ndo_validate_addr = eth_validate_addr, }; /* Entry point of PLIP driver. diff --git a/drivers/net/ps3_gelic_net.c b/drivers/net/ps3_gelic_net.c index d1a5fb4d6ac..a3932c9f340 100644 --- a/drivers/net/ps3_gelic_net.c +++ b/drivers/net/ps3_gelic_net.c @@ -1411,6 +1411,7 @@ static const struct net_device_ops gelic_netdevice_ops = { .ndo_set_multicast_list = gelic_net_set_multi, .ndo_change_mtu = gelic_net_change_mtu, .ndo_tx_timeout = gelic_net_tx_timeout, + .ndo_set_mac_address = eth_mac_addr, .ndo_validate_addr = eth_validate_addr, #ifdef CONFIG_NET_POLL_CONTROLLER .ndo_poll_controller = gelic_net_poll_controller, diff --git a/drivers/net/ps3_gelic_wireless.c b/drivers/net/ps3_gelic_wireless.c index b6b3ca9bdb2..6932b08d746 100644 --- a/drivers/net/ps3_gelic_wireless.c +++ b/drivers/net/ps3_gelic_wireless.c @@ -2707,6 +2707,7 @@ static const struct net_device_ops gelic_wl_netdevice_ops = { .ndo_set_multicast_list = gelic_net_set_multi, .ndo_change_mtu = gelic_net_change_mtu, .ndo_tx_timeout = gelic_net_tx_timeout, + .ndo_set_mac_address = eth_mac_addr, .ndo_validate_addr = eth_validate_addr, #ifdef CONFIG_NET_POLL_CONTROLLER .ndo_poll_controller = gelic_net_poll_controller, diff --git a/drivers/net/sunvnet.c b/drivers/net/sunvnet.c index a82fb2aca4c..bc74db0d12f 100644 --- a/drivers/net/sunvnet.c +++ b/drivers/net/sunvnet.c @@ -1017,6 +1017,7 @@ static const struct net_device_ops vnet_ops = { .ndo_stop = vnet_close, .ndo_set_multicast_list = vnet_set_rx_mode, .ndo_set_mac_address = vnet_set_mac_addr, + .ndo_validate_addr = eth_validate_addr, .ndo_tx_timeout = vnet_tx_timeout, .ndo_change_mtu = vnet_change_mtu, .ndo_start_xmit = vnet_start_xmit, diff --git a/drivers/net/usb/kaweth.c b/drivers/net/usb/kaweth.c index e0131478971..238bea199cc 100644 --- a/drivers/net/usb/kaweth.c +++ b/drivers/net/usb/kaweth.c @@ -999,6 +999,8 @@ static const struct net_device_ops kaweth_netdev_ops = { .ndo_tx_timeout = kaweth_tx_timeout, .ndo_set_multicast_list = kaweth_set_rx_mode, .ndo_get_stats = kaweth_netdev_stats, + .ndo_set_mac_address = eth_mac_addr, + .ndo_validate_addr = eth_validate_addr, }; static int kaweth_probe( diff --git a/drivers/net/usb/pegasus.c b/drivers/net/usb/pegasus.c index 73acbd244aa..9bea2af4a24 100644 --- a/drivers/net/usb/pegasus.c +++ b/drivers/net/usb/pegasus.c @@ -1493,6 +1493,8 @@ static const struct net_device_ops pegasus_netdev_ops = { .ndo_set_multicast_list = pegasus_set_multicast, .ndo_get_stats = pegasus_netdev_stats, .ndo_tx_timeout = pegasus_tx_timeout, + .ndo_set_mac_address = eth_mac_addr, + .ndo_validate_addr = eth_validate_addr, }; static struct usb_driver pegasus_driver = { diff --git a/drivers/net/wireless/orinoco/main.c b/drivers/net/wireless/orinoco/main.c index 345593c4acc..a370e510f19 100644 --- a/drivers/net/wireless/orinoco/main.c +++ b/drivers/net/wireless/orinoco/main.c @@ -2521,6 +2521,8 @@ static const struct net_device_ops orinoco_netdev_ops = { .ndo_start_xmit = orinoco_xmit, .ndo_set_multicast_list = orinoco_set_multicast_list, .ndo_change_mtu = orinoco_change_mtu, + .ndo_set_mac_address = eth_mac_addr, + .ndo_validate_addr = eth_validate_addr, .ndo_tx_timeout = orinoco_tx_timeout, .ndo_get_stats = orinoco_get_stats, }; @@ -2555,7 +2557,6 @@ struct net_device priv->wireless_data.spy_data = &priv->spy_data; dev->wireless_data = &priv->wireless_data; #endif - /* we use the default eth_mac_addr for setting the MAC addr */ /* Reserve space in skb for the SNAP header */ dev->hard_header_len += ENCAPS_OVERHEAD; -- cgit v1.2.3 From 635ecaa70e862f85f652581305fe0074810893be Mon Sep 17 00:00:00 2001 From: Ben Hutchings Date: Thu, 9 Jul 2009 17:59:01 +0000 Subject: netdev: restore MTU change operation alloc_etherdev() used to install a default implementation of this operation, but it must now be explicitly installed in struct net_device_ops. Signed-off-by: Ben Hutchings Signed-off-by: David S. Miller --- drivers/net/8139too.c | 1 + drivers/net/arm/ixp4xx_eth.c | 1 + drivers/net/ehea/ehea_main.c | 1 + drivers/net/fec.c | 1 + drivers/net/plip.c | 1 + drivers/net/smc91x.c | 1 + drivers/net/smsc911x.c | 1 + drivers/net/sunvnet.c | 1 + drivers/net/usb/kaweth.c | 1 + drivers/net/usb/pegasus.c | 1 + drivers/net/via-rhine.c | 1 + 11 files changed, 11 insertions(+) diff --git a/drivers/net/8139too.c b/drivers/net/8139too.c index 8ae72ec1445..0e2ba21d444 100644 --- a/drivers/net/8139too.c +++ b/drivers/net/8139too.c @@ -908,6 +908,7 @@ static const struct net_device_ops rtl8139_netdev_ops = { .ndo_open = rtl8139_open, .ndo_stop = rtl8139_close, .ndo_get_stats = rtl8139_get_stats, + .ndo_change_mtu = eth_change_mtu, .ndo_validate_addr = eth_validate_addr, .ndo_set_mac_address = rtl8139_set_mac_address, .ndo_start_xmit = rtl8139_start_xmit, diff --git a/drivers/net/arm/ixp4xx_eth.c b/drivers/net/arm/ixp4xx_eth.c index 87fde32447d..3fe09876e76 100644 --- a/drivers/net/arm/ixp4xx_eth.c +++ b/drivers/net/arm/ixp4xx_eth.c @@ -1142,6 +1142,7 @@ static const struct net_device_ops ixp4xx_netdev_ops = { .ndo_start_xmit = eth_xmit, .ndo_set_multicast_list = eth_set_mcast_list, .ndo_do_ioctl = eth_ioctl, + .ndo_change_mtu = eth_change_mtu, .ndo_set_mac_address = eth_mac_addr, .ndo_validate_addr = eth_validate_addr, }; diff --git a/drivers/net/ehea/ehea_main.c b/drivers/net/ehea/ehea_main.c index c7d188607c2..e8d46cc1bec 100644 --- a/drivers/net/ehea/ehea_main.c +++ b/drivers/net/ehea/ehea_main.c @@ -3080,6 +3080,7 @@ static const struct net_device_ops ehea_netdev_ops = { .ndo_poll_controller = ehea_netpoll, #endif .ndo_get_stats = ehea_get_stats, + .ndo_change_mtu = eth_change_mtu, .ndo_set_mac_address = ehea_set_mac_addr, .ndo_validate_addr = eth_validate_addr, .ndo_set_multicast_list = ehea_set_multicast_list, diff --git a/drivers/net/fec.c b/drivers/net/fec.c index 0f19b743749..d4b98074b1b 100644 --- a/drivers/net/fec.c +++ b/drivers/net/fec.c @@ -1642,6 +1642,7 @@ static const struct net_device_ops fec_netdev_ops = { .ndo_stop = fec_enet_close, .ndo_start_xmit = fec_enet_start_xmit, .ndo_set_multicast_list = set_multicast_list, + .ndo_change_mtu = eth_change_mtu, .ndo_validate_addr = eth_validate_addr, .ndo_tx_timeout = fec_timeout, .ndo_set_mac_address = fec_set_mac_address, diff --git a/drivers/net/plip.c b/drivers/net/plip.c index b79f7768a40..2ca8b0d84ee 100644 --- a/drivers/net/plip.c +++ b/drivers/net/plip.c @@ -270,6 +270,7 @@ static const struct net_device_ops plip_netdev_ops = { .ndo_stop = plip_close, .ndo_start_xmit = plip_tx_packet, .ndo_do_ioctl = plip_ioctl, + .ndo_change_mtu = eth_change_mtu, .ndo_set_mac_address = eth_mac_addr, .ndo_validate_addr = eth_validate_addr, }; diff --git a/drivers/net/smc91x.c b/drivers/net/smc91x.c index fdcbaf8dfa7..1c70e999cc5 100644 --- a/drivers/net/smc91x.c +++ b/drivers/net/smc91x.c @@ -1774,6 +1774,7 @@ static const struct net_device_ops smc_netdev_ops = { .ndo_start_xmit = smc_hard_start_xmit, .ndo_tx_timeout = smc_timeout, .ndo_set_multicast_list = smc_set_multicast_list, + .ndo_change_mtu = eth_change_mtu, .ndo_validate_addr = eth_validate_addr, .ndo_set_mac_address = eth_mac_addr, #ifdef CONFIG_NET_POLL_CONTROLLER diff --git a/drivers/net/smsc911x.c b/drivers/net/smsc911x.c index 66067f9d91c..94b6d2658dd 100644 --- a/drivers/net/smsc911x.c +++ b/drivers/net/smsc911x.c @@ -1779,6 +1779,7 @@ static const struct net_device_ops smsc911x_netdev_ops = { .ndo_get_stats = smsc911x_get_stats, .ndo_set_multicast_list = smsc911x_set_multicast_list, .ndo_do_ioctl = smsc911x_do_ioctl, + .ndo_change_mtu = eth_change_mtu, .ndo_validate_addr = eth_validate_addr, .ndo_set_mac_address = smsc911x_set_mac_address, #ifdef CONFIG_NET_POLL_CONTROLLER diff --git a/drivers/net/sunvnet.c b/drivers/net/sunvnet.c index bc74db0d12f..f1e5e4542c2 100644 --- a/drivers/net/sunvnet.c +++ b/drivers/net/sunvnet.c @@ -1016,6 +1016,7 @@ static const struct net_device_ops vnet_ops = { .ndo_open = vnet_open, .ndo_stop = vnet_close, .ndo_set_multicast_list = vnet_set_rx_mode, + .ndo_change_mtu = eth_change_mtu, .ndo_set_mac_address = vnet_set_mac_addr, .ndo_validate_addr = eth_validate_addr, .ndo_tx_timeout = vnet_tx_timeout, diff --git a/drivers/net/usb/kaweth.c b/drivers/net/usb/kaweth.c index 238bea199cc..1f9ec29fce5 100644 --- a/drivers/net/usb/kaweth.c +++ b/drivers/net/usb/kaweth.c @@ -999,6 +999,7 @@ static const struct net_device_ops kaweth_netdev_ops = { .ndo_tx_timeout = kaweth_tx_timeout, .ndo_set_multicast_list = kaweth_set_rx_mode, .ndo_get_stats = kaweth_netdev_stats, + .ndo_change_mtu = eth_change_mtu, .ndo_set_mac_address = eth_mac_addr, .ndo_validate_addr = eth_validate_addr, }; diff --git a/drivers/net/usb/pegasus.c b/drivers/net/usb/pegasus.c index 9bea2af4a24..631d269ac98 100644 --- a/drivers/net/usb/pegasus.c +++ b/drivers/net/usb/pegasus.c @@ -1493,6 +1493,7 @@ static const struct net_device_ops pegasus_netdev_ops = { .ndo_set_multicast_list = pegasus_set_multicast, .ndo_get_stats = pegasus_netdev_stats, .ndo_tx_timeout = pegasus_tx_timeout, + .ndo_change_mtu = eth_change_mtu, .ndo_set_mac_address = eth_mac_addr, .ndo_validate_addr = eth_validate_addr, }; diff --git a/drivers/net/via-rhine.c b/drivers/net/via-rhine.c index d3489a3c4c0..88c30a58b4b 100644 --- a/drivers/net/via-rhine.c +++ b/drivers/net/via-rhine.c @@ -621,6 +621,7 @@ static const struct net_device_ops rhine_netdev_ops = { .ndo_start_xmit = rhine_start_tx, .ndo_get_stats = rhine_get_stats, .ndo_set_multicast_list = rhine_set_rx_mode, + .ndo_change_mtu = eth_change_mtu, .ndo_validate_addr = eth_validate_addr, .ndo_set_mac_address = eth_mac_addr, .ndo_do_ioctl = netdev_ioctl, -- cgit v1.2.3 From 8540d66615c39010168ab97eaafb476ec2851298 Mon Sep 17 00:00:00 2001 From: Gianpaolo Cugola Date: Fri, 5 Jun 2009 22:57:52 +0200 Subject: USB: pl2303: New vendor and product id for the prolific driver I recently bought a PC interface for the Cressi Edy dive computer (www.cressi.it) and discovered that it uses the pl2303 chip, albeit with ad-hoc vendor and product ids (04b8, 0521 respectively). Being in the process of writing a linux software for such device (cressi only provides a windows software), I patched the pl2303 linux driver to have the interface recognized. I am submitting you the patch (very basic) for inclusion in next kernel version. From: Gianpaolo Cugola Signed-off-by: Greg Kroah-Hartman --- drivers/usb/serial/pl2303.c | 1 + drivers/usb/serial/pl2303.h | 4 ++++ 2 files changed, 5 insertions(+) diff --git a/drivers/usb/serial/pl2303.c b/drivers/usb/serial/pl2303.c index efaf59c4f5d..7d15bfa7c2d 100644 --- a/drivers/usb/serial/pl2303.c +++ b/drivers/usb/serial/pl2303.c @@ -94,6 +94,7 @@ static struct usb_device_id id_table [] = { { USB_DEVICE(YCCABLE_VENDOR_ID, YCCABLE_PRODUCT_ID) }, { USB_DEVICE(SUPERIAL_VENDOR_ID, SUPERIAL_PRODUCT_ID) }, { USB_DEVICE(HP_VENDOR_ID, HP_LD220_PRODUCT_ID) }, + { USB_DEVICE(CRESSI_VENDOR_ID, CRESSI_EDY_PRODUCT_ID) }, { } /* Terminating entry */ }; diff --git a/drivers/usb/serial/pl2303.h b/drivers/usb/serial/pl2303.h index 1d7a22e3a9f..12aac7d2462 100644 --- a/drivers/usb/serial/pl2303.h +++ b/drivers/usb/serial/pl2303.h @@ -122,3 +122,7 @@ /* Hewlett-Packard LD220-HP POS Pole Display */ #define HP_VENDOR_ID 0x03f0 #define HP_LD220_PRODUCT_ID 0x3524 + +/* Cressi Edy (diving computer) PC interface */ +#define CRESSI_VENDOR_ID 0x04b8 +#define CRESSI_EDY_PRODUCT_ID 0x0521 -- cgit v1.2.3 From c03e7d4bc1c39ae74a5e9f7bd7e9fd12898e42b8 Mon Sep 17 00:00:00 2001 From: Paulius Zaleckas Date: Tue, 9 Jun 2009 11:11:16 +0300 Subject: USB: gadget: fix imx_udc entry in Kconfig Move USB_GADGET_IMX to the right section of Kconfig as this controller is available only as integrated on i.MX CPU. Signed-off-by: Paulius Zaleckas Signed-off-by: Greg Kroah-Hartman --- drivers/usb/gadget/Kconfig | 42 +++++++++++++++++++++--------------------- 1 file changed, 21 insertions(+), 21 deletions(-) diff --git a/drivers/usb/gadget/Kconfig b/drivers/usb/gadget/Kconfig index 5d1ddf485d1..61518c9cdaa 100644 --- a/drivers/usb/gadget/Kconfig +++ b/drivers/usb/gadget/Kconfig @@ -286,6 +286,27 @@ config USB_S3C_HSOTG default USB_GADGET select USB_GADGET_SELECTED +config USB_GADGET_IMX + boolean "Freescale IMX USB Peripheral Controller" + depends on ARCH_MX1 + help + Freescale's IMX series include an integrated full speed + USB 1.1 device controller. The controller in the IMX series + is register-compatible. + + It has Six fixed-function endpoints, as well as endpoint + zero (for control transfers). + + Say "y" to link the driver statically, or "m" to build a + dynamically linked module called "imx_udc" and force all + gadget drivers to also be dynamically linked. + +config USB_IMX + tristate + depends on USB_GADGET_IMX + default USB_GADGET + select USB_GADGET_SELECTED + config USB_GADGET_S3C2410 boolean "S3C2410 USB Device Controller" depends on ARCH_S3C2410 @@ -321,27 +342,6 @@ config USB_GADGET_MUSB_HDRC This OTG-capable silicon IP is used in dual designs including the TI DaVinci, OMAP 243x, OMAP 343x, TUSB 6010, and ADI Blackfin -config USB_GADGET_IMX - boolean "Freescale IMX USB Peripheral Controller" - depends on ARCH_MX1 - help - Freescale's IMX series include an integrated full speed - USB 1.1 device controller. The controller in the IMX series - is register-compatible. - - It has Six fixed-function endpoints, as well as endpoint - zero (for control transfers). - - Say "y" to link the driver statically, or "m" to build a - dynamically linked module called "imx_udc" and force all - gadget drivers to also be dynamically linked. - -config USB_IMX - tristate - depends on USB_GADGET_IMX - default USB_GADGET - select USB_GADGET_SELECTED - config USB_GADGET_M66592 boolean "Renesas M66592 USB Peripheral Controller" select USB_GADGET_DUALSPEED -- cgit v1.2.3 From 9d37ff64567f852a222c78e7d13037bb02395dc7 Mon Sep 17 00:00:00 2001 From: Jan Capek Date: Wed, 10 Jun 2009 18:58:52 +0200 Subject: USB: ftdi_sio - product ID's for CCS PIC programmers The product ID's for the following devices have been added: - LOAD-n-GO - ICD-U64 - PRIME-8 Signed-off-by: Jan Capek Signed-off-by: Greg Kroah-Hartman --- drivers/usb/serial/ftdi_sio.c | 3 +++ drivers/usb/serial/ftdi_sio.h | 3 +++ 2 files changed, 6 insertions(+) diff --git a/drivers/usb/serial/ftdi_sio.c b/drivers/usb/serial/ftdi_sio.c index 5f08702f672..d312b507930 100644 --- a/drivers/usb/serial/ftdi_sio.c +++ b/drivers/usb/serial/ftdi_sio.c @@ -579,6 +579,9 @@ static struct usb_device_id id_table_combined [] = { { USB_DEVICE(FTDI_VID, FTDI_CCSICDU20_0_PID) }, { USB_DEVICE(FTDI_VID, FTDI_CCSICDU40_1_PID) }, { USB_DEVICE(FTDI_VID, FTDI_CCSMACHX_2_PID) }, + { USB_DEVICE(FTDI_VID, FTDI_CCSLOAD_N_GO_3_PID) }, + { USB_DEVICE(FTDI_VID, FTDI_CCSICDU64_4_PID) }, + { USB_DEVICE(FTDI_VID, FTDI_CCSPRIME8_5_PID) }, { USB_DEVICE(FTDI_VID, INSIDE_ACCESSO) }, { USB_DEVICE(INTREPID_VID, INTREPID_VALUECAN_PID) }, { USB_DEVICE(INTREPID_VID, INTREPID_NEOVI_PID) }, diff --git a/drivers/usb/serial/ftdi_sio.h b/drivers/usb/serial/ftdi_sio.h index f1d440a728a..0c6eb253c4b 100644 --- a/drivers/usb/serial/ftdi_sio.h +++ b/drivers/usb/serial/ftdi_sio.h @@ -614,6 +614,9 @@ #define FTDI_CCSICDU20_0_PID 0xF9D0 #define FTDI_CCSICDU40_1_PID 0xF9D1 #define FTDI_CCSMACHX_2_PID 0xF9D2 +#define FTDI_CCSLOAD_N_GO_3_PID 0xF9D3 +#define FTDI_CCSICDU64_4_PID 0xF9D4 +#define FTDI_CCSPRIME8_5_PID 0xF9D5 /* Inside Accesso contactless reader (http://www.insidefr.com) */ #define INSIDE_ACCESSO 0xFAD0 -- cgit v1.2.3 From 9525dcb30f5f412748f58a0537002ea47cfe55de Mon Sep 17 00:00:00 2001 From: Roel Kluin Date: Wed, 10 Jun 2009 12:57:35 -0700 Subject: USB: fhci: mutually exclusive port_status FHCI_PORT_DISABLED, -LOW and -FULL are mutually exclusive as status. Signed-off-by: Roel Kluin Cc: Anton Vorontsov Signed-off-by: Andrew Morton Signed-off-by: Greg Kroah-Hartman --- drivers/usb/host/fhci-sched.c | 8 ++------ 1 file changed, 2 insertions(+), 6 deletions(-) diff --git a/drivers/usb/host/fhci-sched.c b/drivers/usb/host/fhci-sched.c index bb63b68ddb7..62a226b6167 100644 --- a/drivers/usb/host/fhci-sched.c +++ b/drivers/usb/host/fhci-sched.c @@ -576,9 +576,7 @@ irqreturn_t fhci_irq(struct usb_hcd *hcd) out_be16(&usb->fhci->regs->usb_event, usb->saved_msk); } else if (usb->port_status == FHCI_PORT_DISABLED) { - if (fhci_ioports_check_bus_state(fhci) == 1 && - usb->port_status != FHCI_PORT_LOW && - usb->port_status != FHCI_PORT_FULL) + if (fhci_ioports_check_bus_state(fhci) == 1) fhci_device_connected_interrupt(fhci); } usb_er &= ~USB_E_RESET_MASK; @@ -605,9 +603,7 @@ irqreturn_t fhci_irq(struct usb_hcd *hcd) } if (usb_er & USB_E_IDLE_MASK) { - if (usb->port_status == FHCI_PORT_DISABLED && - usb->port_status != FHCI_PORT_LOW && - usb->port_status != FHCI_PORT_FULL) { + if (usb->port_status == FHCI_PORT_DISABLED) { usb_er &= ~USB_E_RESET_MASK; fhci_device_connected_interrupt(fhci); } else if (usb->port_status == -- cgit v1.2.3 From a455212d19d312f6a99b3a4a86fb79fb91dd76c7 Mon Sep 17 00:00:00 2001 From: Alan Stern Date: Thu, 11 Jun 2009 14:56:22 -0400 Subject: USB: EHCI: update toggle state for linked QHs This is an update to the "usb-ehci-update-toggle-state-for-linked-qhs" patch. Since an HCD's endpoint_reset method can be called in interrupt context, it mustn't assume that interrupts are enabled or that it can sleep. So we revert to the original way of refreshing QHs' toggle bits. Now the endpoint_reset method merely clears the toggle flag in the device structure (as was done before) and starts an async QH unlink. When the QH is linked again, after the unlink finishes and an URB is queued, the qh_refresh() routine will update the QH's toggle bit. Signed-off-by: Alan Stern Tested-by: David CC: David Brownell Signed-off-by: Greg Kroah-Hartman --- drivers/usb/host/ehci-hcd.c | 35 ++++++++++++++++------------------- drivers/usb/host/ehci-q.c | 19 ++++++++++++++++++- 2 files changed, 34 insertions(+), 20 deletions(-) diff --git a/drivers/usb/host/ehci-hcd.c b/drivers/usb/host/ehci-hcd.c index 2b72473544d..99c75603ec8 100644 --- a/drivers/usb/host/ehci-hcd.c +++ b/drivers/usb/host/ehci-hcd.c @@ -1030,12 +1030,14 @@ ehci_endpoint_reset(struct usb_hcd *hcd, struct usb_host_endpoint *ep) struct ehci_hcd *ehci = hcd_to_ehci(hcd); struct ehci_qh *qh; int eptype = usb_endpoint_type(&ep->desc); + int epnum = usb_endpoint_num(&ep->desc); + int is_out = usb_endpoint_dir_out(&ep->desc); + unsigned long flags; if (eptype != USB_ENDPOINT_XFER_BULK && eptype != USB_ENDPOINT_XFER_INT) return; - rescan: - spin_lock_irq(&ehci->lock); + spin_lock_irqsave(&ehci->lock, flags); qh = ep->hcpriv; /* For Bulk and Interrupt endpoints we maintain the toggle state @@ -1044,29 +1046,24 @@ ehci_endpoint_reset(struct usb_hcd *hcd, struct usb_host_endpoint *ep) * the toggle bit in the QH. */ if (qh) { + usb_settoggle(qh->dev, epnum, is_out, 0); if (!list_empty(&qh->qtd_list)) { WARN_ONCE(1, "clear_halt for a busy endpoint\n"); - } else if (qh->qh_state == QH_STATE_IDLE) { - qh->hw_token &= ~cpu_to_hc32(ehci, QTD_TOGGLE); - } else { - /* It's not safe to write into the overlay area - * while the QH is active. Unlink it first and - * wait for the unlink to complete. + } else if (qh->qh_state == QH_STATE_LINKED) { + + /* The toggle value in the QH can't be updated + * while the QH is active. Unlink it now; + * re-linking will call qh_refresh(). */ - if (qh->qh_state == QH_STATE_LINKED) { - if (eptype == USB_ENDPOINT_XFER_BULK) { - unlink_async(ehci, qh); - } else { - intr_deschedule(ehci, qh); - (void) qh_schedule(ehci, qh); - } + if (eptype == USB_ENDPOINT_XFER_BULK) { + unlink_async(ehci, qh); + } else { + intr_deschedule(ehci, qh); + (void) qh_schedule(ehci, qh); } - spin_unlock_irq(&ehci->lock); - schedule_timeout_uninterruptible(1); - goto rescan; } } - spin_unlock_irq(&ehci->lock); + spin_unlock_irqrestore(&ehci->lock, flags); } static int ehci_get_frame (struct usb_hcd *hcd) diff --git a/drivers/usb/host/ehci-q.c b/drivers/usb/host/ehci-q.c index 3192f683f80..1976b1b3778 100644 --- a/drivers/usb/host/ehci-q.c +++ b/drivers/usb/host/ehci-q.c @@ -93,6 +93,22 @@ qh_update (struct ehci_hcd *ehci, struct ehci_qh *qh, struct ehci_qtd *qtd) qh->hw_qtd_next = QTD_NEXT(ehci, qtd->qtd_dma); qh->hw_alt_next = EHCI_LIST_END(ehci); + /* Except for control endpoints, we make hardware maintain data + * toggle (like OHCI) ... here (re)initialize the toggle in the QH, + * and set the pseudo-toggle in udev. Only usb_clear_halt() will + * ever clear it. + */ + if (!(qh->hw_info1 & cpu_to_hc32(ehci, 1 << 14))) { + unsigned is_out, epnum; + + is_out = !(qtd->hw_token & cpu_to_hc32(ehci, 1 << 8)); + epnum = (hc32_to_cpup(ehci, &qh->hw_info1) >> 8) & 0x0f; + if (unlikely (!usb_gettoggle (qh->dev, epnum, is_out))) { + qh->hw_token &= ~cpu_to_hc32(ehci, QTD_TOGGLE); + usb_settoggle (qh->dev, epnum, is_out, 1); + } + } + /* HC must see latest qtd and qh data before we clear ACTIVE+HALT */ wmb (); qh->hw_token &= cpu_to_hc32(ehci, QTD_TOGGLE | QTD_STS_PING); @@ -834,6 +850,7 @@ done: qh->qh_state = QH_STATE_IDLE; qh->hw_info1 = cpu_to_hc32(ehci, info1); qh->hw_info2 = cpu_to_hc32(ehci, info2); + usb_settoggle (urb->dev, usb_pipeendpoint (urb->pipe), !is_input, 1); qh_refresh (ehci, qh); return qh; } @@ -864,7 +881,7 @@ static void qh_link_async (struct ehci_hcd *ehci, struct ehci_qh *qh) } } - /* clear halt and maybe recover from silicon quirk */ + /* clear halt and/or toggle; and maybe recover from silicon quirk */ if (qh->qh_state == QH_STATE_IDLE) qh_refresh (ehci, qh); -- cgit v1.2.3 From 4198e4f7e0b756d8a847e408b0017495833538b3 Mon Sep 17 00:00:00 2001 From: Mike Frysinger Date: Thu, 11 Jun 2009 21:59:00 -0400 Subject: USB: isp1760: use __devexit_p() for remove function The isp1760_plat_remove function is declared with __devexit, so the .remove assignment needs to be wrapped with __devexit_p(). Signed-off-by: Mike Frysinger Signed-off-by: Greg Kroah-Hartman --- drivers/usb/host/isp1760-if.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/usb/host/isp1760-if.c b/drivers/usb/host/isp1760-if.c index 3fa3a170279..d4feebfc63b 100644 --- a/drivers/usb/host/isp1760-if.c +++ b/drivers/usb/host/isp1760-if.c @@ -361,7 +361,7 @@ static int __devexit isp1760_plat_remove(struct platform_device *pdev) static struct platform_driver isp1760_plat_driver = { .probe = isp1760_plat_probe, - .remove = isp1760_plat_remove, + .remove = __devexit_p(isp1760_plat_remove), .driver = { .name = "isp1760", }, -- cgit v1.2.3 From 83dfdaa362fd9f1ed8bfa0bba50fff08c063380b Mon Sep 17 00:00:00 2001 From: Kai Engert Date: Fri, 12 Jun 2009 08:51:37 +0200 Subject: USB: option.c: add Qualcomm/Option iCON 210 modem Add modem portion of USB device labeled: Model iCON 210, Qualcomm 3G HSDPA, designed in EU by Option Device starts in usb-storage mode (1e0e:f000) and requires the use of a tool like usb_modeswitch to switch it to modem mode (1e0e:9000). Signed-off-by: Kai Engert Signed-off-by: Greg Kroah-Hartman --- drivers/usb/serial/option.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c index 575816e6ba3..74e32c5625b 100644 --- a/drivers/usb/serial/option.c +++ b/drivers/usb/serial/option.c @@ -531,6 +531,7 @@ static struct usb_device_id option_ids[] = { { USB_DEVICE(DLINK_VENDOR_ID, DLINK_PRODUCT_DWM_652) }, { USB_DEVICE(0x1da5, 0x4515) }, /* BenQ H20 */ { USB_DEVICE(TOSHIBA_VENDOR_ID, TOSHIBA_PRODUCT_HSDPA_MINICARD ) }, /* Toshiba 3G HSDPA == Novatel Expedite EU870D MiniCard */ + { USB_DEVICE(0x1e0e, 0x9000) }, { } /* Terminating entry */ }; MODULE_DEVICE_TABLE(usb, option_ids); -- cgit v1.2.3 From e3a3174519bae99fe3a3d3b9dfda68d820527b44 Mon Sep 17 00:00:00 2001 From: Brad Lu Date: Tue, 16 Jun 2009 18:04:00 +0800 Subject: USB: option.c to support Qisda H21/H20 usb modem This patch added Qisda(VID) & H21/H20(PID) into to supporting list. Please help to check this patch, From: Brad Lu Signed-off-by: Greg Kroah-Hartman --- drivers/usb/serial/option.c | 11 ++++++++++- 1 file changed, 10 insertions(+), 1 deletion(-) diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c index 74e32c5625b..91c43d76a48 100644 --- a/drivers/usb/serial/option.c +++ b/drivers/usb/serial/option.c @@ -307,6 +307,12 @@ static int option_resume(struct usb_serial *serial); #define DLINK_VENDOR_ID 0x1186 #define DLINK_PRODUCT_DWM_652 0x3e04 +#define QISDA_VENDOR_ID 0x1da5 +#define QISDA_PRODUCT_H21_4512 0x4512 +#define QISDA_PRODUCT_H21_4523 0x4523 +#define QISDA_PRODUCT_H20_4515 0x4515 +#define QISDA_PRODUCT_H20_4519 0x4519 + /* TOSHIBA PRODUCTS */ #define TOSHIBA_VENDOR_ID 0x0930 @@ -529,7 +535,10 @@ static struct usb_device_id option_ids[] = { { USB_DEVICE(ZTE_VENDOR_ID, ZTE_PRODUCT_CDMA_TECH) }, { USB_DEVICE(BENQ_VENDOR_ID, BENQ_PRODUCT_H10) }, { USB_DEVICE(DLINK_VENDOR_ID, DLINK_PRODUCT_DWM_652) }, - { USB_DEVICE(0x1da5, 0x4515) }, /* BenQ H20 */ + { USB_DEVICE(QISDA_VENDOR_ID, QISDA_PRODUCT_H21_4512) }, + { USB_DEVICE(QISDA_VENDOR_ID, QISDA_PRODUCT_H21_4523) }, + { USB_DEVICE(QISDA_VENDOR_ID, QISDA_PRODUCT_H20_4515) }, + { USB_DEVICE(QISDA_VENDOR_ID, QISDA_PRODUCT_H20_4519) }, { USB_DEVICE(TOSHIBA_VENDOR_ID, TOSHIBA_PRODUCT_HSDPA_MINICARD ) }, /* Toshiba 3G HSDPA == Novatel Expedite EU870D MiniCard */ { USB_DEVICE(0x1e0e, 0x9000) }, { } /* Terminating entry */ -- cgit v1.2.3 From 1a74826fa1cd6c2e382f927403b4440675f0f55a Mon Sep 17 00:00:00 2001 From: Greg Kroah-Hartman Date: Tue, 23 Jun 2009 15:58:48 -0700 Subject: Revert "USB: Add Intel Langwell USB OTG Transceiver Drive" This reverts commit 453f77558810ffa669ed5a510a7173ec49def396. The driver should not have been accepted as the MSRT code is not in the main kernel yet, which this depends on. Cc: Alan Cox Cc: Hao Wu Signed-off-by: Greg Kroah-Hartman --- drivers/usb/otg/Kconfig | 14 - drivers/usb/otg/Makefile | 1 - drivers/usb/otg/langwell_otg.c | 1915 -------------------------------------- include/linux/usb/langwell_otg.h | 177 ---- 4 files changed, 2107 deletions(-) delete mode 100644 drivers/usb/otg/langwell_otg.c delete mode 100644 include/linux/usb/langwell_otg.h diff --git a/drivers/usb/otg/Kconfig b/drivers/usb/otg/Kconfig index 69feeec1628..aa884d072f0 100644 --- a/drivers/usb/otg/Kconfig +++ b/drivers/usb/otg/Kconfig @@ -59,18 +59,4 @@ config NOP_USB_XCEIV built-in with usb ip or which are autonomous and doesn't require any phy programming such as ISP1x04 etc. -config USB_LANGWELL_OTG - tristate "Intel Langwell USB OTG dual-role support" - depends on USB && MRST - select USB_OTG - select USB_OTG_UTILS - help - Say Y here if you want to build Intel Langwell USB OTG - transciever driver in kernel. This driver implements role - switch between EHCI host driver and Langwell USB OTG - client driver. - - To compile this driver as a module, choose M here: the - module will be called langwell_otg. - endif # USB || OTG diff --git a/drivers/usb/otg/Makefile b/drivers/usb/otg/Makefile index 6d1abdd3c0a..20816785652 100644 --- a/drivers/usb/otg/Makefile +++ b/drivers/usb/otg/Makefile @@ -9,7 +9,6 @@ obj-$(CONFIG_USB_OTG_UTILS) += otg.o obj-$(CONFIG_USB_GPIO_VBUS) += gpio_vbus.o obj-$(CONFIG_ISP1301_OMAP) += isp1301_omap.o obj-$(CONFIG_TWL4030_USB) += twl4030-usb.o -obj-$(CONFIG_USB_LANGWELL_OTG) += langwell_otg.o obj-$(CONFIG_NOP_USB_XCEIV) += nop-usb-xceiv.o ccflags-$(CONFIG_USB_DEBUG) += -DDEBUG diff --git a/drivers/usb/otg/langwell_otg.c b/drivers/usb/otg/langwell_otg.c deleted file mode 100644 index 6f628d0e9f3..00000000000 --- a/drivers/usb/otg/langwell_otg.c +++ /dev/null @@ -1,1915 +0,0 @@ -/* - * Intel Langwell USB OTG transceiver driver - * Copyright (C) 2008 - 2009, Intel Corporation. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms and conditions of the GNU General Public License, - * version 2, as published by the Free Software Foundation. - * - * This program is distributed in the hope it will be useful, but WITHOUT - * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or - * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for - * more details. - * - * You should have received a copy of the GNU General Public License along with - * this program; if not, write to the Free Software Foundation, Inc., - * 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. - * - */ -/* This driver helps to switch Langwell OTG controller function between host - * and peripheral. It works with EHCI driver and Langwell client controller - * driver together. - */ -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include "../core/hcd.h" - -#include - -#define DRIVER_DESC "Intel Langwell USB OTG transceiver driver" -#define DRIVER_VERSION "3.0.0.32L.0002" - -MODULE_DESCRIPTION(DRIVER_DESC); -MODULE_AUTHOR("Henry Yuan , Hao Wu "); -MODULE_VERSION(DRIVER_VERSION); -MODULE_LICENSE("GPL"); - -static const char driver_name[] = "langwell_otg"; - -static int langwell_otg_probe(struct pci_dev *pdev, - const struct pci_device_id *id); -static void langwell_otg_remove(struct pci_dev *pdev); -static int langwell_otg_suspend(struct pci_dev *pdev, pm_message_t message); -static int langwell_otg_resume(struct pci_dev *pdev); - -static int langwell_otg_set_host(struct otg_transceiver *otg, - struct usb_bus *host); -static int langwell_otg_set_peripheral(struct otg_transceiver *otg, - struct usb_gadget *gadget); -static int langwell_otg_start_srp(struct otg_transceiver *otg); - -static const struct pci_device_id pci_ids[] = {{ - .class = ((PCI_CLASS_SERIAL_USB << 8) | 0xfe), - .class_mask = ~0, - .vendor = 0x8086, - .device = 0x0811, - .subvendor = PCI_ANY_ID, - .subdevice = PCI_ANY_ID, -}, { /* end: all zeroes */ } -}; - -static struct pci_driver otg_pci_driver = { - .name = (char *) driver_name, - .id_table = pci_ids, - - .probe = langwell_otg_probe, - .remove = langwell_otg_remove, - - .suspend = langwell_otg_suspend, - .resume = langwell_otg_resume, -}; - -static const char *state_string(enum usb_otg_state state) -{ - switch (state) { - case OTG_STATE_A_IDLE: - return "a_idle"; - case OTG_STATE_A_WAIT_VRISE: - return "a_wait_vrise"; - case OTG_STATE_A_WAIT_BCON: - return "a_wait_bcon"; - case OTG_STATE_A_HOST: - return "a_host"; - case OTG_STATE_A_SUSPEND: - return "a_suspend"; - case OTG_STATE_A_PERIPHERAL: - return "a_peripheral"; - case OTG_STATE_A_WAIT_VFALL: - return "a_wait_vfall"; - case OTG_STATE_A_VBUS_ERR: - return "a_vbus_err"; - case OTG_STATE_B_IDLE: - return "b_idle"; - case OTG_STATE_B_SRP_INIT: - return "b_srp_init"; - case OTG_STATE_B_PERIPHERAL: - return "b_peripheral"; - case OTG_STATE_B_WAIT_ACON: - return "b_wait_acon"; - case OTG_STATE_B_HOST: - return "b_host"; - default: - return "UNDEFINED"; - } -} - -/* HSM timers */ -static inline struct langwell_otg_timer *otg_timer_initializer -(void (*function)(unsigned long), unsigned long expires, unsigned long data) -{ - struct langwell_otg_timer *timer; - timer = kmalloc(sizeof(struct langwell_otg_timer), GFP_KERNEL); - timer->function = function; - timer->expires = expires; - timer->data = data; - return timer; -} - -static struct langwell_otg_timer *a_wait_vrise_tmr, *a_wait_bcon_tmr, - *a_aidl_bdis_tmr, *b_ase0_brst_tmr, *b_se0_srp_tmr, *b_srp_res_tmr, - *b_bus_suspend_tmr; - -static struct list_head active_timers; - -static struct langwell_otg *the_transceiver; - -/* host/client notify transceiver when event affects HNP state */ -void langwell_update_transceiver() -{ - otg_dbg("transceiver driver is notified\n"); - queue_work(the_transceiver->qwork, &the_transceiver->work); -} -EXPORT_SYMBOL(langwell_update_transceiver); - -static int langwell_otg_set_host(struct otg_transceiver *otg, - struct usb_bus *host) -{ - otg->host = host; - - return 0; -} - -static int langwell_otg_set_peripheral(struct otg_transceiver *otg, - struct usb_gadget *gadget) -{ - otg->gadget = gadget; - - return 0; -} - -static int langwell_otg_set_power(struct otg_transceiver *otg, - unsigned mA) -{ - return 0; -} - -/* A-device drives vbus, controlled through PMIC CHRGCNTL register*/ -static void langwell_otg_drv_vbus(int on) -{ - struct ipc_pmic_reg_data pmic_data = {0}; - struct ipc_pmic_reg_data battery_data; - - /* Check if battery is attached or not */ - battery_data.pmic_reg_data[0].register_address = 0xd2; - battery_data.ioc = 0; - battery_data.num_entries = 1; - if (ipc_pmic_register_read(&battery_data)) { - otg_dbg("Failed to read PMIC register 0xd2.\n"); - return; - } - - if ((battery_data.pmic_reg_data[0].value & 0x20) == 0) { - otg_dbg("no battery attached\n"); - return; - } - - /* Workaround for battery attachment issue */ - if (battery_data.pmic_reg_data[0].value == 0x34) { - otg_dbg("battery \n"); - return; - } - - otg_dbg("battery attached\n"); - - pmic_data.ioc = 0; - pmic_data.pmic_reg_data[0].register_address = 0xD4; - pmic_data.num_entries = 1; - if (on) - pmic_data.pmic_reg_data[0].value = 0x20; - else - pmic_data.pmic_reg_data[0].value = 0xc0; - - if (ipc_pmic_register_write(&pmic_data, TRUE)) - otg_dbg("Failed to write PMIC.\n"); - -} - -/* charge vbus or discharge vbus through a resistor to ground */ -static void langwell_otg_chrg_vbus(int on) -{ - - u32 val; - - val = readl(the_transceiver->regs + CI_OTGSC); - - if (on) - writel((val & ~OTGSC_INTSTS_MASK) | OTGSC_VC, - the_transceiver->regs + CI_OTGSC); - else - writel((val & ~OTGSC_INTSTS_MASK) | OTGSC_VD, - the_transceiver->regs + CI_OTGSC); - -} - -/* Start SRP */ -static int langwell_otg_start_srp(struct otg_transceiver *otg) -{ - u32 val; - - otg_dbg("Start SRP ->\n"); - - val = readl(the_transceiver->regs + CI_OTGSC); - - writel((val & ~OTGSC_INTSTS_MASK) | OTGSC_HADP, - the_transceiver->regs + CI_OTGSC); - - /* Check if the data plus is finished or not */ - msleep(8); - val = readl(the_transceiver->regs + CI_OTGSC); - if (val & (OTGSC_HADP | OTGSC_DP)) - otg_dbg("DataLine SRP Error\n"); - - /* FIXME: VBus SRP */ - - return 0; -} - - -/* stop SOF via bus_suspend */ -static void langwell_otg_loc_sof(int on) -{ - struct usb_hcd *hcd; - int err; - - otg_dbg("loc_sof -> %d\n", on); - - hcd = bus_to_hcd(the_transceiver->otg.host); - if (on) - err = hcd->driver->bus_resume(hcd); - else - err = hcd->driver->bus_suspend(hcd); - - if (err) - otg_dbg("Failed to resume/suspend bus - %d\n", err); -} - -static void langwell_otg_phy_low_power(int on) -{ - u32 val; - - otg_dbg("phy low power mode-> %d\n", on); - - val = readl(the_transceiver->regs + CI_HOSTPC1); - if (on) - writel(val | HOSTPC1_PHCD, the_transceiver->regs + CI_HOSTPC1); - else - writel(val & ~HOSTPC1_PHCD, the_transceiver->regs + CI_HOSTPC1); -} - -/* Enable/Disable OTG interrupt */ -static void langwell_otg_intr(int on) -{ - u32 val; - - otg_dbg("interrupt -> %d\n", on); - - val = readl(the_transceiver->regs + CI_OTGSC); - if (on) { - val = val | (OTGSC_INTEN_MASK | OTGSC_IDPU); - writel(val, the_transceiver->regs + CI_OTGSC); - } else { - val = val & ~(OTGSC_INTEN_MASK | OTGSC_IDPU); - writel(val, the_transceiver->regs + CI_OTGSC); - } -} - -/* set HAAR: Hardware Assist Auto-Reset */ -static void langwell_otg_HAAR(int on) -{ - u32 val; - - otg_dbg("HAAR -> %d\n", on); - - val = readl(the_transceiver->regs + CI_OTGSC); - if (on) - writel((val & ~OTGSC_INTSTS_MASK) | OTGSC_HAAR, - the_transceiver->regs + CI_OTGSC); - else - writel((val & ~OTGSC_INTSTS_MASK) & ~OTGSC_HAAR, - the_transceiver->regs + CI_OTGSC); -} - -/* set HABA: Hardware Assist B-Disconnect to A-Connect */ -static void langwell_otg_HABA(int on) -{ - u32 val; - - otg_dbg("HABA -> %d\n", on); - - val = readl(the_transceiver->regs + CI_OTGSC); - if (on) - writel((val & ~OTGSC_INTSTS_MASK) | OTGSC_HABA, - the_transceiver->regs + CI_OTGSC); - else - writel((val & ~OTGSC_INTSTS_MASK) & ~OTGSC_HABA, - the_transceiver->regs + CI_OTGSC); -} - -static int langwell_otg_check_se0_srp(int on) -{ - u32 val; - - int delay_time = TB_SE0_SRP * 10; /* step is 100us */ - - otg_dbg("check_se0_srp -> \n"); - - do { - udelay(100); - if (!delay_time--) - break; - val = readl(the_transceiver->regs + CI_PORTSC1); - val &= PORTSC_LS; - } while (!val); - - otg_dbg("check_se0_srp <- \n"); - return val; -} - -/* The timeout callback function to set time out bit */ -static void set_tmout(unsigned long indicator) -{ - *(int *)indicator = 1; -} - -void langwell_otg_nsf_msg(unsigned long indicator) -{ - switch (indicator) { - case 2: - case 4: - case 6: - case 7: - printk(KERN_ERR "OTG:NSF-%lu - deivce not responding\n", - indicator); - break; - case 3: - printk(KERN_ERR "OTG:NSF-%lu - deivce not supported\n", - indicator); - break; - default: - printk(KERN_ERR "Do not have this kind of NSF\n"); - break; - } -} - -/* Initialize timers */ -static void langwell_otg_init_timers(struct otg_hsm *hsm) -{ - /* HSM used timers */ - a_wait_vrise_tmr = otg_timer_initializer(&set_tmout, TA_WAIT_VRISE, - (unsigned long)&hsm->a_wait_vrise_tmout); - a_wait_bcon_tmr = otg_timer_initializer(&set_tmout, TA_WAIT_BCON, - (unsigned long)&hsm->a_wait_bcon_tmout); - a_aidl_bdis_tmr = otg_timer_initializer(&set_tmout, TA_AIDL_BDIS, - (unsigned long)&hsm->a_aidl_bdis_tmout); - b_ase0_brst_tmr = otg_timer_initializer(&set_tmout, TB_ASE0_BRST, - (unsigned long)&hsm->b_ase0_brst_tmout); - b_se0_srp_tmr = otg_timer_initializer(&set_tmout, TB_SE0_SRP, - (unsigned long)&hsm->b_se0_srp); - b_srp_res_tmr = otg_timer_initializer(&set_tmout, TB_SRP_RES, - (unsigned long)&hsm->b_srp_res_tmout); - b_bus_suspend_tmr = otg_timer_initializer(&set_tmout, TB_BUS_SUSPEND, - (unsigned long)&hsm->b_bus_suspend_tmout); -} - -/* Free timers */ -static void langwell_otg_free_timers(void) -{ - kfree(a_wait_vrise_tmr); - kfree(a_wait_bcon_tmr); - kfree(a_aidl_bdis_tmr); - kfree(b_ase0_brst_tmr); - kfree(b_se0_srp_tmr); - kfree(b_srp_res_tmr); - kfree(b_bus_suspend_tmr); -} - -/* Add timer to timer list */ -static void langwell_otg_add_timer(void *gtimer) -{ - struct langwell_otg_timer *timer = (struct langwell_otg_timer *)gtimer; - struct langwell_otg_timer *tmp_timer; - u32 val32; - - /* Check if the timer is already in the active list, - * if so update timer count - */ - list_for_each_entry(tmp_timer, &active_timers, list) - if (tmp_timer == timer) { - timer->count = timer->expires; - return; - } - timer->count = timer->expires; - - if (list_empty(&active_timers)) { - val32 = readl(the_transceiver->regs + CI_OTGSC); - writel(val32 | OTGSC_1MSE, the_transceiver->regs + CI_OTGSC); - } - - list_add_tail(&timer->list, &active_timers); -} - -/* Remove timer from the timer list; clear timeout status */ -static void langwell_otg_del_timer(void *gtimer) -{ - struct langwell_otg_timer *timer = (struct langwell_otg_timer *)gtimer; - struct langwell_otg_timer *tmp_timer, *del_tmp; - u32 val32; - - list_for_each_entry_safe(tmp_timer, del_tmp, &active_timers, list) - if (tmp_timer == timer) - list_del(&timer->list); - - if (list_empty(&active_timers)) { - val32 = readl(the_transceiver->regs + CI_OTGSC); - writel(val32 & ~OTGSC_1MSE, the_transceiver->regs + CI_OTGSC); - } -} - -/* Reduce timer count by 1, and find timeout conditions.*/ -static int langwell_otg_tick_timer(u32 *int_sts) -{ - struct langwell_otg_timer *tmp_timer, *del_tmp; - int expired = 0; - - list_for_each_entry_safe(tmp_timer, del_tmp, &active_timers, list) { - tmp_timer->count--; - /* check if timer expires */ - if (!tmp_timer->count) { - list_del(&tmp_timer->list); - tmp_timer->function(tmp_timer->data); - expired = 1; - } - } - - if (list_empty(&active_timers)) { - otg_dbg("tick timer: disable 1ms int\n"); - *int_sts = *int_sts & ~OTGSC_1MSE; - } - return expired; -} - -static void reset_otg(void) -{ - u32 val; - int delay_time = 1000; - - otg_dbg("reseting OTG controller ...\n"); - val = readl(the_transceiver->regs + CI_USBCMD); - writel(val | USBCMD_RST, the_transceiver->regs + CI_USBCMD); - do { - udelay(100); - if (!delay_time--) - otg_dbg("reset timeout\n"); - val = readl(the_transceiver->regs + CI_USBCMD); - val &= USBCMD_RST; - } while (val != 0); - otg_dbg("reset done.\n"); -} - -static void set_host_mode(void) -{ - u32 val; - - reset_otg(); - val = readl(the_transceiver->regs + CI_USBMODE); - val = (val & (~USBMODE_CM)) | USBMODE_HOST; - writel(val, the_transceiver->regs + CI_USBMODE); -} - -static void set_client_mode(void) -{ - u32 val; - - reset_otg(); - val = readl(the_transceiver->regs + CI_USBMODE); - val = (val & (~USBMODE_CM)) | USBMODE_DEVICE; - writel(val, the_transceiver->regs + CI_USBMODE); -} - -static void init_hsm(void) -{ - struct langwell_otg *langwell = the_transceiver; - u32 val32; - - /* read OTGSC after reset */ - val32 = readl(langwell->regs + CI_OTGSC); - otg_dbg("%s: OTGSC init value = 0x%x\n", __func__, val32); - - /* set init state */ - if (val32 & OTGSC_ID) { - langwell->hsm.id = 1; - langwell->otg.default_a = 0; - set_client_mode(); - langwell->otg.state = OTG_STATE_B_IDLE; - langwell_otg_drv_vbus(0); - } else { - langwell->hsm.id = 0; - langwell->otg.default_a = 1; - set_host_mode(); - langwell->otg.state = OTG_STATE_A_IDLE; - } - - /* set session indicator */ - if (val32 & OTGSC_BSE) - langwell->hsm.b_sess_end = 1; - if (val32 & OTGSC_BSV) - langwell->hsm.b_sess_vld = 1; - if (val32 & OTGSC_ASV) - langwell->hsm.a_sess_vld = 1; - if (val32 & OTGSC_AVV) - langwell->hsm.a_vbus_vld = 1; - - /* defautly power the bus */ - langwell->hsm.a_bus_req = 1; - langwell->hsm.a_bus_drop = 0; - /* defautly don't request bus as B device */ - langwell->hsm.b_bus_req = 0; - /* no system error */ - langwell->hsm.a_clr_err = 0; -} - -static irqreturn_t otg_dummy_irq(int irq, void *_dev) -{ - void __iomem *reg_base = _dev; - u32 val; - u32 int_mask = 0; - - val = readl(reg_base + CI_USBMODE); - if ((val & USBMODE_CM) != USBMODE_DEVICE) - return IRQ_NONE; - - val = readl(reg_base + CI_USBSTS); - int_mask = val & INTR_DUMMY_MASK; - - if (int_mask == 0) - return IRQ_NONE; - - /* clear hsm.b_conn here since host driver can't detect it - * otg_dummy_irq called means B-disconnect happened. - */ - if (the_transceiver->hsm.b_conn) { - the_transceiver->hsm.b_conn = 0; - if (spin_trylock(&the_transceiver->wq_lock)) { - queue_work(the_transceiver->qwork, - &the_transceiver->work); - spin_unlock(&the_transceiver->wq_lock); - } - } - /* Clear interrupts */ - writel(int_mask, reg_base + CI_USBSTS); - return IRQ_HANDLED; -} - -static irqreturn_t otg_irq(int irq, void *_dev) -{ - struct langwell_otg *langwell = _dev; - u32 int_sts, int_en; - u32 int_mask = 0; - int flag = 0; - - int_sts = readl(langwell->regs + CI_OTGSC); - int_en = (int_sts & OTGSC_INTEN_MASK) >> 8; - int_mask = int_sts & int_en; - if (int_mask == 0) - return IRQ_NONE; - - if (int_mask & OTGSC_IDIS) { - otg_dbg("%s: id change int\n", __func__); - langwell->hsm.id = (int_sts & OTGSC_ID) ? 1 : 0; - flag = 1; - } - if (int_mask & OTGSC_DPIS) { - otg_dbg("%s: data pulse int\n", __func__); - langwell->hsm.a_srp_det = (int_sts & OTGSC_DPS) ? 1 : 0; - flag = 1; - } - if (int_mask & OTGSC_BSEIS) { - otg_dbg("%s: b session end int\n", __func__); - langwell->hsm.b_sess_end = (int_sts & OTGSC_BSE) ? 1 : 0; - flag = 1; - } - if (int_mask & OTGSC_BSVIS) { - otg_dbg("%s: b session valid int\n", __func__); - langwell->hsm.b_sess_vld = (int_sts & OTGSC_BSV) ? 1 : 0; - flag = 1; - } - if (int_mask & OTGSC_ASVIS) { - otg_dbg("%s: a session valid int\n", __func__); - langwell->hsm.a_sess_vld = (int_sts & OTGSC_ASV) ? 1 : 0; - flag = 1; - } - if (int_mask & OTGSC_AVVIS) { - otg_dbg("%s: a vbus valid int\n", __func__); - langwell->hsm.a_vbus_vld = (int_sts & OTGSC_AVV) ? 1 : 0; - flag = 1; - } - - if (int_mask & OTGSC_1MSS) { - /* need to schedule otg_work if any timer is expired */ - if (langwell_otg_tick_timer(&int_sts)) - flag = 1; - } - - writel((int_sts & ~OTGSC_INTSTS_MASK) | int_mask, - langwell->regs + CI_OTGSC); - if (flag) - queue_work(langwell->qwork, &langwell->work); - - return IRQ_HANDLED; -} - -static void langwell_otg_work(struct work_struct *work) -{ - struct langwell_otg *langwell = container_of(work, - struct langwell_otg, work); - int retval; - - otg_dbg("%s: old state = %s\n", __func__, - state_string(langwell->otg.state)); - - switch (langwell->otg.state) { - case OTG_STATE_UNDEFINED: - case OTG_STATE_B_IDLE: - if (!langwell->hsm.id) { - langwell_otg_del_timer(b_srp_res_tmr); - langwell->otg.default_a = 1; - langwell->hsm.a_srp_det = 0; - - langwell_otg_chrg_vbus(0); - langwell_otg_drv_vbus(0); - - set_host_mode(); - langwell->otg.state = OTG_STATE_A_IDLE; - queue_work(langwell->qwork, &langwell->work); - } else if (langwell->hsm.b_srp_res_tmout) { - langwell->hsm.b_srp_res_tmout = 0; - langwell->hsm.b_bus_req = 0; - langwell_otg_nsf_msg(6); - } else if (langwell->hsm.b_sess_vld) { - langwell_otg_del_timer(b_srp_res_tmr); - langwell->hsm.b_sess_end = 0; - langwell->hsm.a_bus_suspend = 0; - - langwell_otg_chrg_vbus(0); - if (langwell->client_ops) { - langwell->client_ops->resume(langwell->pdev); - langwell->otg.state = OTG_STATE_B_PERIPHERAL; - } else - otg_dbg("client driver not loaded.\n"); - - } else if (langwell->hsm.b_bus_req && - (langwell->hsm.b_sess_end)) { - /* workaround for b_se0_srp detection */ - retval = langwell_otg_check_se0_srp(0); - if (retval) { - langwell->hsm.b_bus_req = 0; - otg_dbg("LS is not SE0, try again later\n"); - } else { - /* Start SRP */ - langwell_otg_start_srp(&langwell->otg); - langwell_otg_add_timer(b_srp_res_tmr); - } - } - break; - case OTG_STATE_B_SRP_INIT: - if (!langwell->hsm.id) { - langwell->otg.default_a = 1; - langwell->hsm.a_srp_det = 0; - - langwell_otg_drv_vbus(0); - langwell_otg_chrg_vbus(0); - - langwell->otg.state = OTG_STATE_A_IDLE; - queue_work(langwell->qwork, &langwell->work); - } else if (langwell->hsm.b_sess_vld) { - langwell_otg_chrg_vbus(0); - if (langwell->client_ops) { - langwell->client_ops->resume(langwell->pdev); - langwell->otg.state = OTG_STATE_B_PERIPHERAL; - } else - otg_dbg("client driver not loaded.\n"); - } - break; - case OTG_STATE_B_PERIPHERAL: - if (!langwell->hsm.id) { - langwell->otg.default_a = 1; - langwell->hsm.a_srp_det = 0; - - langwell_otg_drv_vbus(0); - langwell_otg_chrg_vbus(0); - set_host_mode(); - - if (langwell->client_ops) { - langwell->client_ops->suspend(langwell->pdev, - PMSG_FREEZE); - } else - otg_dbg("client driver has been removed.\n"); - - langwell->otg.state = OTG_STATE_A_IDLE; - queue_work(langwell->qwork, &langwell->work); - } else if (!langwell->hsm.b_sess_vld) { - langwell->hsm.b_hnp_enable = 0; - - if (langwell->client_ops) { - langwell->client_ops->suspend(langwell->pdev, - PMSG_FREEZE); - } else - otg_dbg("client driver has been removed.\n"); - - langwell->otg.state = OTG_STATE_B_IDLE; - } else if (langwell->hsm.b_bus_req && langwell->hsm.b_hnp_enable - && langwell->hsm.a_bus_suspend) { - - if (langwell->client_ops) { - langwell->client_ops->suspend(langwell->pdev, - PMSG_FREEZE); - } else - otg_dbg("client driver has been removed.\n"); - - langwell_otg_HAAR(1); - langwell->hsm.a_conn = 0; - - if (langwell->host_ops) { - langwell->host_ops->probe(langwell->pdev, - langwell->host_ops->id_table); - langwell->otg.state = OTG_STATE_B_WAIT_ACON; - } else - otg_dbg("host driver not loaded.\n"); - - langwell->hsm.a_bus_resume = 0; - langwell->hsm.b_ase0_brst_tmout = 0; - langwell_otg_add_timer(b_ase0_brst_tmr); - } - break; - - case OTG_STATE_B_WAIT_ACON: - if (!langwell->hsm.id) { - langwell_otg_del_timer(b_ase0_brst_tmr); - langwell->otg.default_a = 1; - langwell->hsm.a_srp_det = 0; - - langwell_otg_drv_vbus(0); - langwell_otg_chrg_vbus(0); - set_host_mode(); - - langwell_otg_HAAR(0); - if (langwell->host_ops) - langwell->host_ops->remove(langwell->pdev); - else - otg_dbg("host driver has been removed.\n"); - langwell->otg.state = OTG_STATE_A_IDLE; - queue_work(langwell->qwork, &langwell->work); - } else if (!langwell->hsm.b_sess_vld) { - langwell_otg_del_timer(b_ase0_brst_tmr); - langwell->hsm.b_hnp_enable = 0; - langwell->hsm.b_bus_req = 0; - langwell_otg_chrg_vbus(0); - langwell_otg_HAAR(0); - - if (langwell->host_ops) - langwell->host_ops->remove(langwell->pdev); - else - otg_dbg("host driver has been removed.\n"); - langwell->otg.state = OTG_STATE_B_IDLE; - } else if (langwell->hsm.a_conn) { - langwell_otg_del_timer(b_ase0_brst_tmr); - langwell_otg_HAAR(0); - langwell->otg.state = OTG_STATE_B_HOST; - queue_work(langwell->qwork, &langwell->work); - } else if (langwell->hsm.a_bus_resume || - langwell->hsm.b_ase0_brst_tmout) { - langwell_otg_del_timer(b_ase0_brst_tmr); - langwell_otg_HAAR(0); - langwell_otg_nsf_msg(7); - - if (langwell->host_ops) - langwell->host_ops->remove(langwell->pdev); - else - otg_dbg("host driver has been removed.\n"); - - langwell->hsm.a_bus_suspend = 0; - langwell->hsm.b_bus_req = 0; - - if (langwell->client_ops) - langwell->client_ops->resume(langwell->pdev); - else - otg_dbg("client driver not loaded.\n"); - - langwell->otg.state = OTG_STATE_B_PERIPHERAL; - } - break; - - case OTG_STATE_B_HOST: - if (!langwell->hsm.id) { - langwell->otg.default_a = 1; - langwell->hsm.a_srp_det = 0; - - langwell_otg_drv_vbus(0); - langwell_otg_chrg_vbus(0); - set_host_mode(); - if (langwell->host_ops) - langwell->host_ops->remove(langwell->pdev); - else - otg_dbg("host driver has been removed.\n"); - langwell->otg.state = OTG_STATE_A_IDLE; - queue_work(langwell->qwork, &langwell->work); - } else if (!langwell->hsm.b_sess_vld) { - langwell->hsm.b_hnp_enable = 0; - langwell->hsm.b_bus_req = 0; - langwell_otg_chrg_vbus(0); - if (langwell->host_ops) - langwell->host_ops->remove(langwell->pdev); - else - otg_dbg("host driver has been removed.\n"); - langwell->otg.state = OTG_STATE_B_IDLE; - } else if ((!langwell->hsm.b_bus_req) || - (!langwell->hsm.a_conn)) { - langwell->hsm.b_bus_req = 0; - langwell_otg_loc_sof(0); - if (langwell->host_ops) - langwell->host_ops->remove(langwell->pdev); - else - otg_dbg("host driver has been removed.\n"); - - langwell->hsm.a_bus_suspend = 0; - - if (langwell->client_ops) - langwell->client_ops->resume(langwell->pdev); - else - otg_dbg("client driver not loaded.\n"); - - langwell->otg.state = OTG_STATE_B_PERIPHERAL; - } - break; - - case OTG_STATE_A_IDLE: - langwell->otg.default_a = 1; - if (langwell->hsm.id) { - langwell->otg.default_a = 0; - langwell->hsm.b_bus_req = 0; - langwell_otg_drv_vbus(0); - langwell_otg_chrg_vbus(0); - - langwell->otg.state = OTG_STATE_B_IDLE; - queue_work(langwell->qwork, &langwell->work); - } else if (langwell->hsm.a_sess_vld) { - langwell_otg_drv_vbus(1); - langwell->hsm.a_srp_det = 1; - langwell->hsm.a_wait_vrise_tmout = 0; - langwell_otg_add_timer(a_wait_vrise_tmr); - langwell->otg.state = OTG_STATE_A_WAIT_VRISE; - queue_work(langwell->qwork, &langwell->work); - } else if (!langwell->hsm.a_bus_drop && - (langwell->hsm.a_srp_det || langwell->hsm.a_bus_req)) { - langwell_otg_drv_vbus(1); - langwell->hsm.a_wait_vrise_tmout = 0; - langwell_otg_add_timer(a_wait_vrise_tmr); - langwell->otg.state = OTG_STATE_A_WAIT_VRISE; - queue_work(langwell->qwork, &langwell->work); - } - break; - case OTG_STATE_A_WAIT_VRISE: - if (langwell->hsm.id) { - langwell_otg_del_timer(a_wait_vrise_tmr); - langwell->hsm.b_bus_req = 0; - langwell->otg.default_a = 0; - langwell_otg_drv_vbus(0); - langwell->otg.state = OTG_STATE_B_IDLE; - } else if (langwell->hsm.a_vbus_vld) { - langwell_otg_del_timer(a_wait_vrise_tmr); - if (langwell->host_ops) - langwell->host_ops->probe(langwell->pdev, - langwell->host_ops->id_table); - else - otg_dbg("host driver not loaded.\n"); - langwell->hsm.b_conn = 0; - langwell->hsm.a_set_b_hnp_en = 0; - langwell->hsm.a_wait_bcon_tmout = 0; - langwell_otg_add_timer(a_wait_bcon_tmr); - langwell->otg.state = OTG_STATE_A_WAIT_BCON; - } else if (langwell->hsm.a_wait_vrise_tmout) { - if (langwell->hsm.a_vbus_vld) { - if (langwell->host_ops) - langwell->host_ops->probe( - langwell->pdev, - langwell->host_ops->id_table); - else - otg_dbg("host driver not loaded.\n"); - langwell->hsm.b_conn = 0; - langwell->hsm.a_set_b_hnp_en = 0; - langwell->hsm.a_wait_bcon_tmout = 0; - langwell_otg_add_timer(a_wait_bcon_tmr); - langwell->otg.state = OTG_STATE_A_WAIT_BCON; - } else { - langwell_otg_drv_vbus(0); - langwell->otg.state = OTG_STATE_A_VBUS_ERR; - } - } - break; - case OTG_STATE_A_WAIT_BCON: - if (langwell->hsm.id) { - langwell_otg_del_timer(a_wait_bcon_tmr); - - langwell->otg.default_a = 0; - langwell->hsm.b_bus_req = 0; - if (langwell->host_ops) - langwell->host_ops->remove(langwell->pdev); - else - otg_dbg("host driver has been removed.\n"); - langwell_otg_drv_vbus(0); - langwell->otg.state = OTG_STATE_B_IDLE; - queue_work(langwell->qwork, &langwell->work); - } else if (!langwell->hsm.a_vbus_vld) { - langwell_otg_del_timer(a_wait_bcon_tmr); - - if (langwell->host_ops) - langwell->host_ops->remove(langwell->pdev); - else - otg_dbg("host driver has been removed.\n"); - langwell_otg_drv_vbus(0); - langwell->otg.state = OTG_STATE_A_VBUS_ERR; - } else if (langwell->hsm.a_bus_drop || - (langwell->hsm.a_wait_bcon_tmout && - !langwell->hsm.a_bus_req)) { - langwell_otg_del_timer(a_wait_bcon_tmr); - - if (langwell->host_ops) - langwell->host_ops->remove(langwell->pdev); - else - otg_dbg("host driver has been removed.\n"); - langwell_otg_drv_vbus(0); - langwell->otg.state = OTG_STATE_A_WAIT_VFALL; - } else if (langwell->hsm.b_conn) { - langwell_otg_del_timer(a_wait_bcon_tmr); - - langwell->hsm.a_suspend_req = 0; - langwell->otg.state = OTG_STATE_A_HOST; - if (!langwell->hsm.a_bus_req && - langwell->hsm.a_set_b_hnp_en) { - /* It is not safe enough to do a fast - * transistion from A_WAIT_BCON to - * A_SUSPEND */ - msleep(10000); - if (langwell->hsm.a_bus_req) - break; - - if (request_irq(langwell->pdev->irq, - otg_dummy_irq, IRQF_SHARED, - driver_name, langwell->regs) != 0) { - otg_dbg("request interrupt %d fail\n", - langwell->pdev->irq); - } - - langwell_otg_HABA(1); - langwell->hsm.b_bus_resume = 0; - langwell->hsm.a_aidl_bdis_tmout = 0; - langwell_otg_add_timer(a_aidl_bdis_tmr); - - langwell_otg_loc_sof(0); - langwell->otg.state = OTG_STATE_A_SUSPEND; - } else if (!langwell->hsm.a_bus_req && - !langwell->hsm.a_set_b_hnp_en) { - struct pci_dev *pdev = langwell->pdev; - if (langwell->host_ops) - langwell->host_ops->remove(pdev); - else - otg_dbg("host driver removed.\n"); - langwell_otg_drv_vbus(0); - langwell->otg.state = OTG_STATE_A_WAIT_VFALL; - } - } - break; - case OTG_STATE_A_HOST: - if (langwell->hsm.id) { - langwell->otg.default_a = 0; - langwell->hsm.b_bus_req = 0; - if (langwell->host_ops) - langwell->host_ops->remove(langwell->pdev); - else - otg_dbg("host driver has been removed.\n"); - langwell_otg_drv_vbus(0); - langwell->otg.state = OTG_STATE_B_IDLE; - queue_work(langwell->qwork, &langwell->work); - } else if (langwell->hsm.a_bus_drop || - (!langwell->hsm.a_set_b_hnp_en && !langwell->hsm.a_bus_req)) { - if (langwell->host_ops) - langwell->host_ops->remove(langwell->pdev); - else - otg_dbg("host driver has been removed.\n"); - langwell_otg_drv_vbus(0); - langwell->otg.state = OTG_STATE_A_WAIT_VFALL; - } else if (!langwell->hsm.a_vbus_vld) { - if (langwell->host_ops) - langwell->host_ops->remove(langwell->pdev); - else - otg_dbg("host driver has been removed.\n"); - langwell_otg_drv_vbus(0); - langwell->otg.state = OTG_STATE_A_VBUS_ERR; - } else if (langwell->hsm.a_set_b_hnp_en - && !langwell->hsm.a_bus_req) { - /* Set HABA to enable hardware assistance to signal - * A-connect after receiver B-disconnect. Hardware - * will then set client mode and enable URE, SLE and - * PCE after the assistance. otg_dummy_irq is used to - * clean these ints when client driver is not resumed. - */ - if (request_irq(langwell->pdev->irq, - otg_dummy_irq, IRQF_SHARED, driver_name, - langwell->regs) != 0) { - otg_dbg("request interrupt %d failed\n", - langwell->pdev->irq); - } - - /* set HABA */ - langwell_otg_HABA(1); - langwell->hsm.b_bus_resume = 0; - langwell->hsm.a_aidl_bdis_tmout = 0; - langwell_otg_add_timer(a_aidl_bdis_tmr); - langwell_otg_loc_sof(0); - langwell->otg.state = OTG_STATE_A_SUSPEND; - } else if (!langwell->hsm.b_conn || !langwell->hsm.a_bus_req) { - langwell->hsm.a_wait_bcon_tmout = 0; - langwell->hsm.a_set_b_hnp_en = 0; - langwell_otg_add_timer(a_wait_bcon_tmr); - langwell->otg.state = OTG_STATE_A_WAIT_BCON; - } - break; - case OTG_STATE_A_SUSPEND: - if (langwell->hsm.id) { - langwell_otg_del_timer(a_aidl_bdis_tmr); - langwell_otg_HABA(0); - free_irq(langwell->pdev->irq, langwell->regs); - langwell->otg.default_a = 0; - langwell->hsm.b_bus_req = 0; - if (langwell->host_ops) - langwell->host_ops->remove(langwell->pdev); - else - otg_dbg("host driver has been removed.\n"); - langwell_otg_drv_vbus(0); - langwell->otg.state = OTG_STATE_B_IDLE; - queue_work(langwell->qwork, &langwell->work); - } else if (langwell->hsm.a_bus_req || - langwell->hsm.b_bus_resume) { - langwell_otg_del_timer(a_aidl_bdis_tmr); - langwell_otg_HABA(0); - free_irq(langwell->pdev->irq, langwell->regs); - langwell->hsm.a_suspend_req = 0; - langwell_otg_loc_sof(1); - langwell->otg.state = OTG_STATE_A_HOST; - } else if (langwell->hsm.a_aidl_bdis_tmout || - langwell->hsm.a_bus_drop) { - langwell_otg_del_timer(a_aidl_bdis_tmr); - langwell_otg_HABA(0); - free_irq(langwell->pdev->irq, langwell->regs); - if (langwell->host_ops) - langwell->host_ops->remove(langwell->pdev); - else - otg_dbg("host driver has been removed.\n"); - langwell_otg_drv_vbus(0); - langwell->otg.state = OTG_STATE_A_WAIT_VFALL; - } else if (!langwell->hsm.b_conn && - langwell->hsm.a_set_b_hnp_en) { - langwell_otg_del_timer(a_aidl_bdis_tmr); - langwell_otg_HABA(0); - free_irq(langwell->pdev->irq, langwell->regs); - - if (langwell->host_ops) - langwell->host_ops->remove(langwell->pdev); - else - otg_dbg("host driver has been removed.\n"); - - langwell->hsm.b_bus_suspend = 0; - langwell->hsm.b_bus_suspend_vld = 0; - langwell->hsm.b_bus_suspend_tmout = 0; - - /* msleep(200); */ - if (langwell->client_ops) - langwell->client_ops->resume(langwell->pdev); - else - otg_dbg("client driver not loaded.\n"); - - langwell_otg_add_timer(b_bus_suspend_tmr); - langwell->otg.state = OTG_STATE_A_PERIPHERAL; - break; - } else if (!langwell->hsm.a_vbus_vld) { - langwell_otg_del_timer(a_aidl_bdis_tmr); - langwell_otg_HABA(0); - free_irq(langwell->pdev->irq, langwell->regs); - if (langwell->host_ops) - langwell->host_ops->remove(langwell->pdev); - else - otg_dbg("host driver has been removed.\n"); - langwell_otg_drv_vbus(0); - langwell->otg.state = OTG_STATE_A_VBUS_ERR; - } - break; - case OTG_STATE_A_PERIPHERAL: - if (langwell->hsm.id) { - langwell_otg_del_timer(b_bus_suspend_tmr); - langwell->otg.default_a = 0; - langwell->hsm.b_bus_req = 0; - if (langwell->client_ops) - langwell->client_ops->suspend(langwell->pdev, - PMSG_FREEZE); - else - otg_dbg("client driver has been removed.\n"); - langwell_otg_drv_vbus(0); - langwell->otg.state = OTG_STATE_B_IDLE; - queue_work(langwell->qwork, &langwell->work); - } else if (!langwell->hsm.a_vbus_vld) { - langwell_otg_del_timer(b_bus_suspend_tmr); - if (langwell->client_ops) - langwell->client_ops->suspend(langwell->pdev, - PMSG_FREEZE); - else - otg_dbg("client driver has been removed.\n"); - langwell_otg_drv_vbus(0); - langwell->otg.state = OTG_STATE_A_VBUS_ERR; - } else if (langwell->hsm.a_bus_drop) { - langwell_otg_del_timer(b_bus_suspend_tmr); - if (langwell->client_ops) - langwell->client_ops->suspend(langwell->pdev, - PMSG_FREEZE); - else - otg_dbg("client driver has been removed.\n"); - langwell_otg_drv_vbus(0); - langwell->otg.state = OTG_STATE_A_WAIT_VFALL; - } else if (langwell->hsm.b_bus_suspend) { - langwell_otg_del_timer(b_bus_suspend_tmr); - if (langwell->client_ops) - langwell->client_ops->suspend(langwell->pdev, - PMSG_FREEZE); - else - otg_dbg("client driver has been removed.\n"); - - if (langwell->host_ops) - langwell->host_ops->probe(langwell->pdev, - langwell->host_ops->id_table); - else - otg_dbg("host driver not loaded.\n"); - langwell->hsm.a_set_b_hnp_en = 0; - langwell->hsm.a_wait_bcon_tmout = 0; - langwell_otg_add_timer(a_wait_bcon_tmr); - langwell->otg.state = OTG_STATE_A_WAIT_BCON; - } else if (langwell->hsm.b_bus_suspend_tmout) { - u32 val; - val = readl(langwell->regs + CI_PORTSC1); - if (!(val & PORTSC_SUSP)) - break; - if (langwell->client_ops) - langwell->client_ops->suspend(langwell->pdev, - PMSG_FREEZE); - else - otg_dbg("client driver has been removed.\n"); - if (langwell->host_ops) - langwell->host_ops->probe(langwell->pdev, - langwell->host_ops->id_table); - else - otg_dbg("host driver not loaded.\n"); - langwell->hsm.a_set_b_hnp_en = 0; - langwell->hsm.a_wait_bcon_tmout = 0; - langwell_otg_add_timer(a_wait_bcon_tmr); - langwell->otg.state = OTG_STATE_A_WAIT_BCON; - } - break; - case OTG_STATE_A_VBUS_ERR: - if (langwell->hsm.id) { - langwell->otg.default_a = 0; - langwell->hsm.a_clr_err = 0; - langwell->hsm.a_srp_det = 0; - langwell->otg.state = OTG_STATE_B_IDLE; - queue_work(langwell->qwork, &langwell->work); - } else if (langwell->hsm.a_clr_err) { - langwell->hsm.a_clr_err = 0; - langwell->hsm.a_srp_det = 0; - reset_otg(); - init_hsm(); - if (langwell->otg.state == OTG_STATE_A_IDLE) - queue_work(langwell->qwork, &langwell->work); - } - break; - case OTG_STATE_A_WAIT_VFALL: - if (langwell->hsm.id) { - langwell->otg.default_a = 0; - langwell->otg.state = OTG_STATE_B_IDLE; - queue_work(langwell->qwork, &langwell->work); - } else if (langwell->hsm.a_bus_req) { - langwell_otg_drv_vbus(1); - langwell->hsm.a_wait_vrise_tmout = 0; - langwell_otg_add_timer(a_wait_vrise_tmr); - langwell->otg.state = OTG_STATE_A_WAIT_VRISE; - } else if (!langwell->hsm.a_sess_vld) { - langwell->hsm.a_srp_det = 0; - langwell_otg_drv_vbus(0); - set_host_mode(); - langwell->otg.state = OTG_STATE_A_IDLE; - } - break; - default: - ; - } - - otg_dbg("%s: new state = %s\n", __func__, - state_string(langwell->otg.state)); -} - - static ssize_t -show_registers(struct device *_dev, struct device_attribute *attr, char *buf) -{ - struct langwell_otg *langwell; - char *next; - unsigned size; - unsigned t; - - langwell = the_transceiver; - next = buf; - size = PAGE_SIZE; - - t = scnprintf(next, size, - "\n" - "USBCMD = 0x%08x \n" - "USBSTS = 0x%08x \n" - "USBINTR = 0x%08x \n" - "ASYNCLISTADDR = 0x%08x \n" - "PORTSC1 = 0x%08x \n" - "HOSTPC1 = 0x%08x \n" - "OTGSC = 0x%08x \n" - "USBMODE = 0x%08x \n", - readl(langwell->regs + 0x30), - readl(langwell->regs + 0x34), - readl(langwell->regs + 0x38), - readl(langwell->regs + 0x48), - readl(langwell->regs + 0x74), - readl(langwell->regs + 0xb4), - readl(langwell->regs + 0xf4), - readl(langwell->regs + 0xf8) - ); - size -= t; - next += t; - - return PAGE_SIZE - size; -} -static DEVICE_ATTR(registers, S_IRUGO, show_registers, NULL); - -static ssize_t -show_hsm(struct device *_dev, struct device_attribute *attr, char *buf) -{ - struct langwell_otg *langwell; - char *next; - unsigned size; - unsigned t; - - langwell = the_transceiver; - next = buf; - size = PAGE_SIZE; - - t = scnprintf(next, size, - "\n" - "current state = %s\n" - "a_bus_resume = \t%d\n" - "a_bus_suspend = \t%d\n" - "a_conn = \t%d\n" - "a_sess_vld = \t%d\n" - "a_srp_det = \t%d\n" - "a_vbus_vld = \t%d\n" - "b_bus_resume = \t%d\n" - "b_bus_suspend = \t%d\n" - "b_conn = \t%d\n" - "b_se0_srp = \t%d\n" - "b_sess_end = \t%d\n" - "b_sess_vld = \t%d\n" - "id = \t%d\n" - "a_set_b_hnp_en = \t%d\n" - "b_srp_done = \t%d\n" - "b_hnp_enable = \t%d\n" - "a_wait_vrise_tmout = \t%d\n" - "a_wait_bcon_tmout = \t%d\n" - "a_aidl_bdis_tmout = \t%d\n" - "b_ase0_brst_tmout = \t%d\n" - "a_bus_drop = \t%d\n" - "a_bus_req = \t%d\n" - "a_clr_err = \t%d\n" - "a_suspend_req = \t%d\n" - "b_bus_req = \t%d\n" - "b_bus_suspend_tmout = \t%d\n" - "b_bus_suspend_vld = \t%d\n", - state_string(langwell->otg.state), - langwell->hsm.a_bus_resume, - langwell->hsm.a_bus_suspend, - langwell->hsm.a_conn, - langwell->hsm.a_sess_vld, - langwell->hsm.a_srp_det, - langwell->hsm.a_vbus_vld, - langwell->hsm.b_bus_resume, - langwell->hsm.b_bus_suspend, - langwell->hsm.b_conn, - langwell->hsm.b_se0_srp, - langwell->hsm.b_sess_end, - langwell->hsm.b_sess_vld, - langwell->hsm.id, - langwell->hsm.a_set_b_hnp_en, - langwell->hsm.b_srp_done, - langwell->hsm.b_hnp_enable, - langwell->hsm.a_wait_vrise_tmout, - langwell->hsm.a_wait_bcon_tmout, - langwell->hsm.a_aidl_bdis_tmout, - langwell->hsm.b_ase0_brst_tmout, - langwell->hsm.a_bus_drop, - langwell->hsm.a_bus_req, - langwell->hsm.a_clr_err, - langwell->hsm.a_suspend_req, - langwell->hsm.b_bus_req, - langwell->hsm.b_bus_suspend_tmout, - langwell->hsm.b_bus_suspend_vld - ); - size -= t; - next += t; - - return PAGE_SIZE - size; -} -static DEVICE_ATTR(hsm, S_IRUGO, show_hsm, NULL); - -static ssize_t -get_a_bus_req(struct device *dev, struct device_attribute *attr, char *buf) -{ - struct langwell_otg *langwell; - char *next; - unsigned size; - unsigned t; - - langwell = the_transceiver; - next = buf; - size = PAGE_SIZE; - - t = scnprintf(next, size, "%d", langwell->hsm.a_bus_req); - size -= t; - next += t; - - return PAGE_SIZE - size; -} - -static ssize_t -set_a_bus_req(struct device *dev, struct device_attribute *attr, - const char *buf, size_t count) -{ - struct langwell_otg *langwell; - langwell = the_transceiver; - if (!langwell->otg.default_a) - return -1; - if (count > 2) - return -1; - - if (buf[0] == '0') { - langwell->hsm.a_bus_req = 0; - otg_dbg("a_bus_req = 0\n"); - } else if (buf[0] == '1') { - /* If a_bus_drop is TRUE, a_bus_req can't be set */ - if (langwell->hsm.a_bus_drop) - return -1; - langwell->hsm.a_bus_req = 1; - otg_dbg("a_bus_req = 1\n"); - } - if (spin_trylock(&langwell->wq_lock)) { - queue_work(langwell->qwork, &langwell->work); - spin_unlock(&langwell->wq_lock); - } - return count; -} -static DEVICE_ATTR(a_bus_req, S_IRUGO | S_IWUGO, get_a_bus_req, set_a_bus_req); - -static ssize_t -get_a_bus_drop(struct device *dev, struct device_attribute *attr, char *buf) -{ - struct langwell_otg *langwell; - char *next; - unsigned size; - unsigned t; - - langwell = the_transceiver; - next = buf; - size = PAGE_SIZE; - - t = scnprintf(next, size, "%d", langwell->hsm.a_bus_drop); - size -= t; - next += t; - - return PAGE_SIZE - size; -} - -static ssize_t -set_a_bus_drop(struct device *dev, struct device_attribute *attr, - const char *buf, size_t count) -{ - struct langwell_otg *langwell; - langwell = the_transceiver; - if (!langwell->otg.default_a) - return -1; - if (count > 2) - return -1; - - if (buf[0] == '0') { - langwell->hsm.a_bus_drop = 0; - otg_dbg("a_bus_drop = 0\n"); - } else if (buf[0] == '1') { - langwell->hsm.a_bus_drop = 1; - langwell->hsm.a_bus_req = 0; - otg_dbg("a_bus_drop = 1, then a_bus_req = 0\n"); - } - if (spin_trylock(&langwell->wq_lock)) { - queue_work(langwell->qwork, &langwell->work); - spin_unlock(&langwell->wq_lock); - } - return count; -} -static DEVICE_ATTR(a_bus_drop, S_IRUGO | S_IWUGO, - get_a_bus_drop, set_a_bus_drop); - -static ssize_t -get_b_bus_req(struct device *dev, struct device_attribute *attr, char *buf) -{ - struct langwell_otg *langwell; - char *next; - unsigned size; - unsigned t; - - langwell = the_transceiver; - next = buf; - size = PAGE_SIZE; - - t = scnprintf(next, size, "%d", langwell->hsm.b_bus_req); - size -= t; - next += t; - - return PAGE_SIZE - size; -} - -static ssize_t -set_b_bus_req(struct device *dev, struct device_attribute *attr, - const char *buf, size_t count) -{ - struct langwell_otg *langwell; - langwell = the_transceiver; - - if (langwell->otg.default_a) - return -1; - - if (count > 2) - return -1; - - if (buf[0] == '0') { - langwell->hsm.b_bus_req = 0; - otg_dbg("b_bus_req = 0\n"); - } else if (buf[0] == '1') { - langwell->hsm.b_bus_req = 1; - otg_dbg("b_bus_req = 1\n"); - } - if (spin_trylock(&langwell->wq_lock)) { - queue_work(langwell->qwork, &langwell->work); - spin_unlock(&langwell->wq_lock); - } - return count; -} -static DEVICE_ATTR(b_bus_req, S_IRUGO | S_IWUGO, get_b_bus_req, set_b_bus_req); - -static ssize_t -set_a_clr_err(struct device *dev, struct device_attribute *attr, - const char *buf, size_t count) -{ - struct langwell_otg *langwell; - langwell = the_transceiver; - - if (!langwell->otg.default_a) - return -1; - if (count > 2) - return -1; - - if (buf[0] == '1') { - langwell->hsm.a_clr_err = 1; - otg_dbg("a_clr_err = 1\n"); - } - if (spin_trylock(&langwell->wq_lock)) { - queue_work(langwell->qwork, &langwell->work); - spin_unlock(&langwell->wq_lock); - } - return count; -} -static DEVICE_ATTR(a_clr_err, S_IWUGO, NULL, set_a_clr_err); - -static struct attribute *inputs_attrs[] = { - &dev_attr_a_bus_req.attr, - &dev_attr_a_bus_drop.attr, - &dev_attr_b_bus_req.attr, - &dev_attr_a_clr_err.attr, - NULL, -}; - -static struct attribute_group debug_dev_attr_group = { - .name = "inputs", - .attrs = inputs_attrs, -}; - -int langwell_register_host(struct pci_driver *host_driver) -{ - int ret = 0; - - the_transceiver->host_ops = host_driver; - queue_work(the_transceiver->qwork, &the_transceiver->work); - otg_dbg("host controller driver is registered\n"); - - return ret; -} -EXPORT_SYMBOL(langwell_register_host); - -void langwell_unregister_host(struct pci_driver *host_driver) -{ - if (the_transceiver->host_ops) - the_transceiver->host_ops->remove(the_transceiver->pdev); - the_transceiver->host_ops = NULL; - the_transceiver->hsm.a_bus_drop = 1; - queue_work(the_transceiver->qwork, &the_transceiver->work); - otg_dbg("host controller driver is unregistered\n"); -} -EXPORT_SYMBOL(langwell_unregister_host); - -int langwell_register_peripheral(struct pci_driver *client_driver) -{ - int ret = 0; - - if (client_driver) - ret = client_driver->probe(the_transceiver->pdev, - client_driver->id_table); - if (!ret) { - the_transceiver->client_ops = client_driver; - queue_work(the_transceiver->qwork, &the_transceiver->work); - otg_dbg("client controller driver is registered\n"); - } - - return ret; -} -EXPORT_SYMBOL(langwell_register_peripheral); - -void langwell_unregister_peripheral(struct pci_driver *client_driver) -{ - if (the_transceiver->client_ops) - the_transceiver->client_ops->remove(the_transceiver->pdev); - the_transceiver->client_ops = NULL; - the_transceiver->hsm.b_bus_req = 0; - queue_work(the_transceiver->qwork, &the_transceiver->work); - otg_dbg("client controller driver is unregistered\n"); -} -EXPORT_SYMBOL(langwell_unregister_peripheral); - -static int langwell_otg_probe(struct pci_dev *pdev, - const struct pci_device_id *id) -{ - unsigned long resource, len; - void __iomem *base = NULL; - int retval; - u32 val32; - struct langwell_otg *langwell; - char qname[] = "langwell_otg_queue"; - - retval = 0; - otg_dbg("\notg controller is detected.\n"); - if (pci_enable_device(pdev) < 0) { - retval = -ENODEV; - goto done; - } - - langwell = kzalloc(sizeof *langwell, GFP_KERNEL); - if (langwell == NULL) { - retval = -ENOMEM; - goto done; - } - the_transceiver = langwell; - - /* control register: BAR 0 */ - resource = pci_resource_start(pdev, 0); - len = pci_resource_len(pdev, 0); - if (!request_mem_region(resource, len, driver_name)) { - retval = -EBUSY; - goto err; - } - langwell->region = 1; - - base = ioremap_nocache(resource, len); - if (base == NULL) { - retval = -EFAULT; - goto err; - } - langwell->regs = base; - - if (!pdev->irq) { - otg_dbg("No IRQ.\n"); - retval = -ENODEV; - goto err; - } - - langwell->qwork = create_workqueue(qname); - if (!langwell->qwork) { - otg_dbg("cannot create workqueue %s\n", qname); - retval = -ENOMEM; - goto err; - } - INIT_WORK(&langwell->work, langwell_otg_work); - - /* OTG common part */ - langwell->pdev = pdev; - langwell->otg.dev = &pdev->dev; - langwell->otg.label = driver_name; - langwell->otg.set_host = langwell_otg_set_host; - langwell->otg.set_peripheral = langwell_otg_set_peripheral; - langwell->otg.set_power = langwell_otg_set_power; - langwell->otg.start_srp = langwell_otg_start_srp; - langwell->otg.state = OTG_STATE_UNDEFINED; - if (otg_set_transceiver(&langwell->otg)) { - otg_dbg("can't set transceiver\n"); - retval = -EBUSY; - goto err; - } - - reset_otg(); - init_hsm(); - - spin_lock_init(&langwell->lock); - spin_lock_init(&langwell->wq_lock); - INIT_LIST_HEAD(&active_timers); - langwell_otg_init_timers(&langwell->hsm); - - if (request_irq(pdev->irq, otg_irq, IRQF_SHARED, - driver_name, langwell) != 0) { - otg_dbg("request interrupt %d failed\n", pdev->irq); - retval = -EBUSY; - goto err; - } - - /* enable OTGSC int */ - val32 = OTGSC_DPIE | OTGSC_BSEIE | OTGSC_BSVIE | - OTGSC_ASVIE | OTGSC_AVVIE | OTGSC_IDIE | OTGSC_IDPU; - writel(val32, langwell->regs + CI_OTGSC); - - retval = device_create_file(&pdev->dev, &dev_attr_registers); - if (retval < 0) { - otg_dbg("Can't register sysfs attribute: %d\n", retval); - goto err; - } - - retval = device_create_file(&pdev->dev, &dev_attr_hsm); - if (retval < 0) { - otg_dbg("Can't hsm sysfs attribute: %d\n", retval); - goto err; - } - - retval = sysfs_create_group(&pdev->dev.kobj, &debug_dev_attr_group); - if (retval < 0) { - otg_dbg("Can't register sysfs attr group: %d\n", retval); - goto err; - } - - if (langwell->otg.state == OTG_STATE_A_IDLE) - queue_work(langwell->qwork, &langwell->work); - - return 0; - -err: - if (the_transceiver) - langwell_otg_remove(pdev); -done: - return retval; -} - -static void langwell_otg_remove(struct pci_dev *pdev) -{ - struct langwell_otg *langwell; - - langwell = the_transceiver; - - if (langwell->qwork) { - flush_workqueue(langwell->qwork); - destroy_workqueue(langwell->qwork); - } - langwell_otg_free_timers(); - - /* disable OTGSC interrupt as OTGSC doesn't change in reset */ - writel(0, langwell->regs + CI_OTGSC); - - if (pdev->irq) - free_irq(pdev->irq, langwell); - if (langwell->regs) - iounmap(langwell->regs); - if (langwell->region) - release_mem_region(pci_resource_start(pdev, 0), - pci_resource_len(pdev, 0)); - - otg_set_transceiver(NULL); - pci_disable_device(pdev); - sysfs_remove_group(&pdev->dev.kobj, &debug_dev_attr_group); - device_remove_file(&pdev->dev, &dev_attr_hsm); - device_remove_file(&pdev->dev, &dev_attr_registers); - kfree(langwell); - langwell = NULL; -} - -static void transceiver_suspend(struct pci_dev *pdev) -{ - pci_save_state(pdev); - pci_set_power_state(pdev, PCI_D3hot); - langwell_otg_phy_low_power(1); -} - -static int langwell_otg_suspend(struct pci_dev *pdev, pm_message_t message) -{ - int ret = 0; - struct langwell_otg *langwell; - - langwell = the_transceiver; - - /* Disbale OTG interrupts */ - langwell_otg_intr(0); - - if (pdev->irq) - free_irq(pdev->irq, langwell); - - /* Prevent more otg_work */ - flush_workqueue(langwell->qwork); - spin_lock(&langwell->wq_lock); - - /* start actions */ - switch (langwell->otg.state) { - case OTG_STATE_A_IDLE: - case OTG_STATE_B_IDLE: - case OTG_STATE_A_WAIT_VFALL: - case OTG_STATE_A_VBUS_ERR: - transceiver_suspend(pdev); - break; - case OTG_STATE_A_WAIT_VRISE: - langwell_otg_del_timer(a_wait_vrise_tmr); - langwell->hsm.a_srp_det = 0; - langwell_otg_drv_vbus(0); - langwell->otg.state = OTG_STATE_A_IDLE; - transceiver_suspend(pdev); - break; - case OTG_STATE_A_WAIT_BCON: - langwell_otg_del_timer(a_wait_bcon_tmr); - if (langwell->host_ops) - ret = langwell->host_ops->suspend(pdev, message); - langwell_otg_drv_vbus(0); - break; - case OTG_STATE_A_HOST: - if (langwell->host_ops) - ret = langwell->host_ops->suspend(pdev, message); - langwell_otg_drv_vbus(0); - langwell_otg_phy_low_power(1); - break; - case OTG_STATE_A_SUSPEND: - langwell_otg_del_timer(a_aidl_bdis_tmr); - langwell_otg_HABA(0); - if (langwell->host_ops) - langwell->host_ops->remove(pdev); - else - otg_dbg("host driver has been removed.\n"); - langwell_otg_drv_vbus(0); - transceiver_suspend(pdev); - langwell->otg.state = OTG_STATE_A_WAIT_VFALL; - break; - case OTG_STATE_A_PERIPHERAL: - if (langwell->client_ops) - ret = langwell->client_ops->suspend(pdev, message); - else - otg_dbg("client driver has been removed.\n"); - langwell_otg_drv_vbus(0); - transceiver_suspend(pdev); - langwell->otg.state = OTG_STATE_A_WAIT_VFALL; - break; - case OTG_STATE_B_HOST: - if (langwell->host_ops) - langwell->host_ops->remove(pdev); - else - otg_dbg("host driver has been removed.\n"); - langwell->hsm.b_bus_req = 0; - transceiver_suspend(pdev); - langwell->otg.state = OTG_STATE_B_IDLE; - break; - case OTG_STATE_B_PERIPHERAL: - if (langwell->client_ops) - ret = langwell->client_ops->suspend(pdev, message); - else - otg_dbg("client driver has been removed.\n"); - break; - case OTG_STATE_B_WAIT_ACON: - langwell_otg_del_timer(b_ase0_brst_tmr); - langwell_otg_HAAR(0); - if (langwell->host_ops) - langwell->host_ops->remove(pdev); - else - otg_dbg("host driver has been removed.\n"); - langwell->hsm.b_bus_req = 0; - langwell->otg.state = OTG_STATE_B_IDLE; - transceiver_suspend(pdev); - break; - default: - otg_dbg("error state before suspend\n "); - break; - } - spin_unlock(&langwell->wq_lock); - - return ret; -} - -static void transceiver_resume(struct pci_dev *pdev) -{ - pci_restore_state(pdev); - pci_set_power_state(pdev, PCI_D0); - langwell_otg_phy_low_power(0); -} - -static int langwell_otg_resume(struct pci_dev *pdev) -{ - int ret = 0; - struct langwell_otg *langwell; - - langwell = the_transceiver; - - spin_lock(&langwell->wq_lock); - - switch (langwell->otg.state) { - case OTG_STATE_A_IDLE: - case OTG_STATE_B_IDLE: - case OTG_STATE_A_WAIT_VFALL: - case OTG_STATE_A_VBUS_ERR: - transceiver_resume(pdev); - break; - case OTG_STATE_A_WAIT_BCON: - langwell_otg_add_timer(a_wait_bcon_tmr); - langwell_otg_drv_vbus(1); - if (langwell->host_ops) - ret = langwell->host_ops->resume(pdev); - break; - case OTG_STATE_A_HOST: - langwell_otg_drv_vbus(1); - langwell_otg_phy_low_power(0); - if (langwell->host_ops) - ret = langwell->host_ops->resume(pdev); - break; - case OTG_STATE_B_PERIPHERAL: - if (langwell->client_ops) - ret = langwell->client_ops->resume(pdev); - else - otg_dbg("client driver not loaded.\n"); - break; - default: - otg_dbg("error state before suspend\n "); - break; - } - - if (request_irq(pdev->irq, otg_irq, IRQF_SHARED, - driver_name, the_transceiver) != 0) { - otg_dbg("request interrupt %d failed\n", pdev->irq); - ret = -EBUSY; - } - - /* enable OTG interrupts */ - langwell_otg_intr(1); - - spin_unlock(&langwell->wq_lock); - - queue_work(langwell->qwork, &langwell->work); - - - return ret; -} - -static int __init langwell_otg_init(void) -{ - return pci_register_driver(&otg_pci_driver); -} -module_init(langwell_otg_init); - -static void __exit langwell_otg_cleanup(void) -{ - pci_unregister_driver(&otg_pci_driver); -} -module_exit(langwell_otg_cleanup); diff --git a/include/linux/usb/langwell_otg.h b/include/linux/usb/langwell_otg.h deleted file mode 100644 index e115ae6df1d..00000000000 --- a/include/linux/usb/langwell_otg.h +++ /dev/null @@ -1,177 +0,0 @@ -/* - * Intel Langwell USB OTG transceiver driver - * Copyright (C) 2008, Intel Corporation. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms and conditions of the GNU General Public License, - * version 2, as published by the Free Software Foundation. - * - * This program is distributed in the hope it will be useful, but WITHOUT - * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or - * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for - * more details. - * - * You should have received a copy of the GNU General Public License along with - * this program; if not, write to the Free Software Foundation, Inc., - * 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. - * - */ - -#ifndef __LANGWELL_OTG_H__ -#define __LANGWELL_OTG_H__ - -/* notify transceiver driver about OTG events */ -extern void langwell_update_transceiver(void); -/* HCD register bus driver */ -extern int langwell_register_host(struct pci_driver *host_driver); -/* HCD unregister bus driver */ -extern void langwell_unregister_host(struct pci_driver *host_driver); -/* DCD register bus driver */ -extern int langwell_register_peripheral(struct pci_driver *client_driver); -/* DCD unregister bus driver */ -extern void langwell_unregister_peripheral(struct pci_driver *client_driver); -/* No silent failure, output warning message */ -extern void langwell_otg_nsf_msg(unsigned long message); - -#define CI_USBCMD 0x30 -# define USBCMD_RST BIT(1) -# define USBCMD_RS BIT(0) -#define CI_USBSTS 0x34 -# define USBSTS_SLI BIT(8) -# define USBSTS_URI BIT(6) -# define USBSTS_PCI BIT(2) -#define CI_PORTSC1 0x74 -# define PORTSC_PP BIT(12) -# define PORTSC_LS (BIT(11) | BIT(10)) -# define PORTSC_SUSP BIT(7) -# define PORTSC_CCS BIT(0) -#define CI_HOSTPC1 0xb4 -# define HOSTPC1_PHCD BIT(22) -#define CI_OTGSC 0xf4 -# define OTGSC_DPIE BIT(30) -# define OTGSC_1MSE BIT(29) -# define OTGSC_BSEIE BIT(28) -# define OTGSC_BSVIE BIT(27) -# define OTGSC_ASVIE BIT(26) -# define OTGSC_AVVIE BIT(25) -# define OTGSC_IDIE BIT(24) -# define OTGSC_DPIS BIT(22) -# define OTGSC_1MSS BIT(21) -# define OTGSC_BSEIS BIT(20) -# define OTGSC_BSVIS BIT(19) -# define OTGSC_ASVIS BIT(18) -# define OTGSC_AVVIS BIT(17) -# define OTGSC_IDIS BIT(16) -# define OTGSC_DPS BIT(14) -# define OTGSC_1MST BIT(13) -# define OTGSC_BSE BIT(12) -# define OTGSC_BSV BIT(11) -# define OTGSC_ASV BIT(10) -# define OTGSC_AVV BIT(9) -# define OTGSC_ID BIT(8) -# define OTGSC_HABA BIT(7) -# define OTGSC_HADP BIT(6) -# define OTGSC_IDPU BIT(5) -# define OTGSC_DP BIT(4) -# define OTGSC_OT BIT(3) -# define OTGSC_HAAR BIT(2) -# define OTGSC_VC BIT(1) -# define OTGSC_VD BIT(0) -# define OTGSC_INTEN_MASK (0x7f << 24) -# define OTGSC_INTSTS_MASK (0x7f << 16) -#define CI_USBMODE 0xf8 -# define USBMODE_CM (BIT(1) | BIT(0)) -# define USBMODE_IDLE 0 -# define USBMODE_DEVICE 0x2 -# define USBMODE_HOST 0x3 - -#define INTR_DUMMY_MASK (USBSTS_SLI | USBSTS_URI | USBSTS_PCI) - -struct otg_hsm { - /* Input */ - int a_bus_resume; - int a_bus_suspend; - int a_conn; - int a_sess_vld; - int a_srp_det; - int a_vbus_vld; - int b_bus_resume; - int b_bus_suspend; - int b_conn; - int b_se0_srp; - int b_sess_end; - int b_sess_vld; - int id; - - /* Internal variables */ - int a_set_b_hnp_en; - int b_srp_done; - int b_hnp_enable; - - /* Timeout indicator for timers */ - int a_wait_vrise_tmout; - int a_wait_bcon_tmout; - int a_aidl_bdis_tmout; - int b_ase0_brst_tmout; - int b_bus_suspend_tmout; - int b_srp_res_tmout; - - /* Informative variables */ - int a_bus_drop; - int a_bus_req; - int a_clr_err; - int a_suspend_req; - int b_bus_req; - - /* Output */ - int drv_vbus; - int loc_conn; - int loc_sof; - - /* Others */ - int b_bus_suspend_vld; -}; - -#define TA_WAIT_VRISE 100 -#define TA_WAIT_BCON 30000 -#define TA_AIDL_BDIS 15000 -#define TB_ASE0_BRST 5000 -#define TB_SE0_SRP 2 -#define TB_SRP_RES 100 -#define TB_BUS_SUSPEND 500 - -struct langwell_otg_timer { - unsigned long expires; /* Number of count increase to timeout */ - unsigned long count; /* Tick counter */ - void (*function)(unsigned long); /* Timeout function */ - unsigned long data; /* Data passed to function */ - struct list_head list; -}; - -struct langwell_otg { - struct otg_transceiver otg; - struct otg_hsm hsm; - void __iomem *regs; - unsigned region; - struct pci_driver *host_ops; - struct pci_driver *client_ops; - struct pci_dev *pdev; - struct work_struct work; - struct workqueue_struct *qwork; - spinlock_t lock; - spinlock_t wq_lock; -}; - -static inline struct langwell_otg *otg_to_langwell(struct otg_transceiver *otg) -{ - return container_of(otg, struct langwell_otg, otg); -} - -#ifdef DEBUG -#define otg_dbg(fmt, args...) \ - printk(KERN_DEBUG fmt , ## args) -#else -#define otg_dbg(fmt, args...) \ - do { } while (0) -#endif /* DEBUG */ -#endif /* __LANGWELL_OTG_H__ */ -- cgit v1.2.3 From 05cbc2d58224d01925bfb93a0c3f0ab1f11b1eea Mon Sep 17 00:00:00 2001 From: Greg Kroah-Hartman Date: Tue, 23 Jun 2009 16:01:06 -0700 Subject: USB: gadget: audio: provide correct device id The audio gadget driver should use a "Linux" device id, instead of relying on NetChip's vendor id. So provide one out of our reserved namespace. Cc: Bryan Wu Cc: Mike Frysinger Cc: David Brownell Signed-off-by: Greg Kroah-Hartman --- drivers/usb/gadget/audio.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/drivers/usb/gadget/audio.c b/drivers/usb/gadget/audio.c index 94de7e86461..9f80f4e970b 100644 --- a/drivers/usb/gadget/audio.c +++ b/drivers/usb/gadget/audio.c @@ -42,9 +42,9 @@ * Instead: allocate your own, using normal USB-IF procedures. */ -/* Thanks to NetChip Technologies for donating this product ID. */ -#define AUDIO_VENDOR_NUM 0x0525 /* NetChip */ -#define AUDIO_PRODUCT_NUM 0xa4a1 /* Linux-USB Audio Gadget */ +/* Thanks to Linux Foundation for donating this product ID. */ +#define AUDIO_VENDOR_NUM 0x1d6b /* Linux Foundation */ +#define AUDIO_PRODUCT_NUM 0x0101 /* Linux-USB Audio Gadget */ /*-------------------------------------------------------------------------*/ -- cgit v1.2.3 From 3c43f27bf57b0502df2478253699559ee1d43f6d Mon Sep 17 00:00:00 2001 From: Greg Kroah-Hartman Date: Fri, 26 Jun 2009 08:05:20 -0700 Subject: USB: ti_usb_3410_5052: fix duplicate device ids. commit 1a1fab513734b3a4fca1bee8229e5ff7e1cb873c accidentally added the device id to both tables in the driver, which causes problems as this is only a single port device, not a multiple port device. Cc: stable Signed-off-by: Greg Kroah-Hartman --- drivers/usb/serial/ti_usb_3410_5052.c | 1 - 1 file changed, 1 deletion(-) diff --git a/drivers/usb/serial/ti_usb_3410_5052.c b/drivers/usb/serial/ti_usb_3410_5052.c index 991d8232e37..35d8852eeff 100644 --- a/drivers/usb/serial/ti_usb_3410_5052.c +++ b/drivers/usb/serial/ti_usb_3410_5052.c @@ -191,7 +191,6 @@ static struct usb_device_id ti_id_table_5052[5+TI_EXTRA_VID_PID_COUNT+1] = { { USB_DEVICE(TI_VENDOR_ID, TI_5152_BOOT_PRODUCT_ID) }, { USB_DEVICE(TI_VENDOR_ID, TI_5052_EEPROM_PRODUCT_ID) }, { USB_DEVICE(TI_VENDOR_ID, TI_5052_FIRMWARE_PRODUCT_ID) }, - { USB_DEVICE(IBM_VENDOR_ID, IBM_4543_PRODUCT_ID) }, }; static struct usb_device_id ti_id_table_combined[14+2*TI_EXTRA_VID_PID_COUNT+1] = { -- cgit v1.2.3 From 45e83889eb291714d3a4727e98e2488074affbf8 Mon Sep 17 00:00:00 2001 From: Arnd Bergmann Date: Fri, 19 Jun 2009 05:35:34 -0700 Subject: USB: buildfix ppc randconfig We could just make the USB_OHCI_HCD_PPC_OF option implicit and selected only if at least one of USB_OHCI_HCD_PPC_OF_BE and USB_OHCI_HCD_PPC_OF_LE are set. [ dbrownell@users.sourceforge.net: fix patch manglation and dependencies ] Signed-off-by: Arnd Bergmann Tested-by: Subrata Modak Signed-off-by: David Brownell Signed-off-by: Greg Kroah-Hartman --- drivers/usb/host/Kconfig | 29 +++++++++++++++-------------- 1 file changed, 15 insertions(+), 14 deletions(-) diff --git a/drivers/usb/host/Kconfig b/drivers/usb/host/Kconfig index 0c03471f0d4..1a920c70b5a 100644 --- a/drivers/usb/host/Kconfig +++ b/drivers/usb/host/Kconfig @@ -181,26 +181,27 @@ config USB_OHCI_HCD_PPC_SOC Enables support for the USB controller on the MPC52xx or STB03xxx processor chip. If unsure, say Y. -config USB_OHCI_HCD_PPC_OF - bool "OHCI support for PPC USB controller on OF platform bus" - depends on USB_OHCI_HCD && PPC_OF - default y - ---help--- - Enables support for the USB controller PowerPC present on the - OpenFirmware platform bus. - config USB_OHCI_HCD_PPC_OF_BE - bool "Support big endian HC" - depends on USB_OHCI_HCD_PPC_OF - default y + bool "OHCI support for OF platform bus (big endian)" + depends on USB_OHCI_HCD && PPC_OF select USB_OHCI_BIG_ENDIAN_DESC select USB_OHCI_BIG_ENDIAN_MMIO + ---help--- + Enables support for big-endian USB controllers present on the + OpenFirmware platform bus. config USB_OHCI_HCD_PPC_OF_LE - bool "Support little endian HC" - depends on USB_OHCI_HCD_PPC_OF - default n + bool "OHCI support for OF platform bus (little endian)" + depends on USB_OHCI_HCD && PPC_OF select USB_OHCI_LITTLE_ENDIAN + ---help--- + Enables support for little-endian USB controllers present on the + OpenFirmware platform bus. + +config USB_OHCI_HCD_PPC_OF + bool + depends on USB_OHCI_HCD && PPC_OF + default USB_OHCI_HCD_PPC_OF_BE || USB_OHCI_HCD_PPC_OF_LE config USB_OHCI_HCD_PCI bool "OHCI support for PCI-bus USB controllers" -- cgit v1.2.3 From ca157c4a51fa6209f28c316f4a63d594adb79518 Mon Sep 17 00:00:00 2001 From: Oliver Neukum Date: Thu, 2 Jul 2009 16:41:39 +0200 Subject: USB: fix memory leak in usbtmc If an error is returned kfree must also be called. Signed-off-by: Oliver Neukum Signed-off-by: Greg Kroah-Hartman --- drivers/usb/class/usbtmc.c | 10 ++++++---- 1 file changed, 6 insertions(+), 4 deletions(-) diff --git a/drivers/usb/class/usbtmc.c b/drivers/usb/class/usbtmc.c index 3703789d0d2..b09a527f734 100644 --- a/drivers/usb/class/usbtmc.c +++ b/drivers/usb/class/usbtmc.c @@ -751,7 +751,7 @@ static int get_capabilities(struct usbtmc_device_data *data) { struct device *dev = &data->usb_dev->dev; char *buffer; - int rv; + int rv = 0; buffer = kmalloc(0x18, GFP_KERNEL); if (!buffer) @@ -763,7 +763,7 @@ static int get_capabilities(struct usbtmc_device_data *data) 0, 0, buffer, 0x18, USBTMC_TIMEOUT); if (rv < 0) { dev_err(dev, "usb_control_msg returned %d\n", rv); - return rv; + goto err_out; } dev_dbg(dev, "GET_CAPABILITIES returned %x\n", buffer[0]); @@ -773,7 +773,8 @@ static int get_capabilities(struct usbtmc_device_data *data) dev_dbg(dev, "USB488 device capabilities are %x\n", buffer[15]); if (buffer[0] != USBTMC_STATUS_SUCCESS) { dev_err(dev, "GET_CAPABILITIES returned %x\n", buffer[0]); - return -EPERM; + rv = -EPERM; + goto err_out; } data->capabilities.interface_capabilities = buffer[4]; @@ -781,8 +782,9 @@ static int get_capabilities(struct usbtmc_device_data *data) data->capabilities.usb488_interface_capabilities = buffer[14]; data->capabilities.usb488_device_capabilities = buffer[15]; +err_out: kfree(buffer); - return 0; + return rv; } #define capability_attribute(name) \ -- cgit v1.2.3 From 6bc2146e2b01654534a1cae127ef96bf4b5f3d53 Mon Sep 17 00:00:00 2001 From: Qiuping Chen Date: Wed, 1 Jul 2009 03:49:29 -0700 Subject: USB: gadget: rndis conformance tweak Support OID_802_3_MAC_OPTIONS in gen_ndis_query_resp() of rndis.c to make RNDIS gadget pass 1c_SetMulticast subtest in Microsoft NDISTest6: http://www.microsoft.com/whdc/DevTools/tools/NDIStest.mspx The other tests in NDISTest6 are passed. [ dbrownell@users.sourceforge.net: remove OID_802_3_MAXIMUM_LIST_SIZE setting ... it was bogus, this code only handles one entry, not 32. And we don't know what would break if we lied about that... ] Signed-off-by: Helen Chen Signed-off-by: David Brownell Signed-off-by: Greg Kroah-Hartman --- drivers/usb/gadget/rndis.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/usb/gadget/rndis.c b/drivers/usb/gadget/rndis.c index 2b4660e08c4..ca41b0b5afb 100644 --- a/drivers/usb/gadget/rndis.c +++ b/drivers/usb/gadget/rndis.c @@ -442,6 +442,8 @@ gen_ndis_query_resp (int configNr, u32 OID, u8 *buf, unsigned buf_len, case OID_802_3_MAC_OPTIONS: pr_debug("%s: OID_802_3_MAC_OPTIONS\n", __func__); + *outbuf = cpu_to_le32(0); + retval = 0; break; /* ieee802.3 statistics OIDs (table 4-4) */ -- cgit v1.2.3 From d163ef248385fc434e44b04a5151ae5d6a6c2d16 Mon Sep 17 00:00:00 2001 From: David Brownell Date: Wed, 1 Jul 2009 03:32:43 -0700 Subject: USB: musb: davinci dm355 updates (remainder) Finish merging updates for DM355 chips into musb/davinci.c now that its support is in mainline: kick in new DRVVBUS controls. Signed-off-by: David Brownell Signed-off-by: Kevin Hilman Signed-off-by: Greg Kroah-Hartman --- drivers/usb/musb/davinci.c | 25 +++++++++++++++++++++++++ 1 file changed, 25 insertions(+) diff --git a/drivers/usb/musb/davinci.c b/drivers/usb/musb/davinci.c index 180d7daa409..658ae4e83f6 100644 --- a/drivers/usb/musb/davinci.c +++ b/drivers/usb/musb/davinci.c @@ -35,6 +35,7 @@ #include #include #include +#include #include @@ -411,6 +412,21 @@ int __init musb_platform_init(struct musb *musb) __raw_writel(phy_ctrl, USB_PHY_CTRL); } + /* On dm355, the default-A state machine needs DRVVBUS control. + * If we won't be a host, there's no need to turn it on. + */ + if (cpu_is_davinci_dm355()) { + u32 deepsleep = __raw_readl(DM355_DEEPSLEEP); + + if (is_host_enabled(musb)) { + deepsleep &= ~DRVVBUS_OVERRIDE; + } else { + deepsleep &= ~DRVVBUS_FORCE; + deepsleep |= DRVVBUS_OVERRIDE; + } + __raw_writel(deepsleep, DM355_DEEPSLEEP); + } + /* reset the controller */ musb_writel(tibase, DAVINCI_USB_CTRL_REG, 0x1); @@ -437,6 +453,15 @@ int musb_platform_exit(struct musb *musb) if (is_host_enabled(musb)) del_timer_sync(&otg_workaround); + /* force VBUS off */ + if (cpu_is_davinci_dm355()) { + u32 deepsleep = __raw_readl(DM355_DEEPSLEEP); + + deepsleep &= ~DRVVBUS_FORCE; + deepsleep |= DRVVBUS_OVERRIDE; + __raw_writel(deepsleep, DM355_DEEPSLEEP); + } + davinci_source_power(musb, 0 /*off*/, 1); /* delay, to avoid problems with module reload */ -- cgit v1.2.3 From 30899ca7f20571c4bd64544dec261171f6ec255b Mon Sep 17 00:00:00 2001 From: Kevin Hilman Date: Wed, 1 Jul 2009 03:33:46 -0700 Subject: USB: musb: davinci dm6446evm GPIO renumbering Numbering for GPIOs on the pcf857x chips on the dm644x EVM board changed when DaVinci chips with more GPIOs were supported. Update the GPIO number used for nVBUS_DRV. Longer term, we need a better abstraction of board-specific setup in this code so we're not hard-coding board specific GPIOs into the driver, but for now this at least gets it back to working with mainline davinci core code. Signed-off-by: Kevin Hilman Signed-off-by: Greg Kroah-Hartman --- drivers/usb/musb/davinci.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/usb/musb/davinci.c b/drivers/usb/musb/davinci.c index 658ae4e83f6..992b516efd8 100644 --- a/drivers/usb/musb/davinci.c +++ b/drivers/usb/musb/davinci.c @@ -42,7 +42,7 @@ #include "musb_core.h" #ifdef CONFIG_MACH_DAVINCI_EVM -#define GPIO_nVBUS_DRV 87 +#define GPIO_nVBUS_DRV 144 #endif #include "davinci.h" -- cgit v1.2.3 From 56a075dcd64b25c828af1752dff0ac1e6833e135 Mon Sep 17 00:00:00 2001 From: Philipp Zabel Date: Wed, 1 Jul 2009 03:42:45 -0700 Subject: USB: gadget: pxa25x uses gpio_is_valid Use gpio_is_valid instead of assuming that every GPIO number != 0 is valid while 0 is not. Signed-off-by: Philipp Zabel Acked-by: Eric Miao Signed-off-by: David Brownell Signed-off-by: Greg Kroah-Hartman --- drivers/usb/gadget/pxa25x_udc.c | 22 +++++++++++----------- 1 file changed, 11 insertions(+), 11 deletions(-) diff --git a/drivers/usb/gadget/pxa25x_udc.c b/drivers/usb/gadget/pxa25x_udc.c index 0ce4e281984..e51c29a5f84 100644 --- a/drivers/usb/gadget/pxa25x_udc.c +++ b/drivers/usb/gadget/pxa25x_udc.c @@ -139,7 +139,7 @@ static int is_vbus_present(void) { struct pxa2xx_udc_mach_info *mach = the_controller->mach; - if (mach->gpio_vbus) { + if (gpio_is_valid(mach->gpio_vbus)) { int value = gpio_get_value(mach->gpio_vbus); if (mach->gpio_vbus_inverted) @@ -158,7 +158,7 @@ static void pullup_off(void) struct pxa2xx_udc_mach_info *mach = the_controller->mach; int off_level = mach->gpio_pullup_inverted; - if (mach->gpio_pullup) + if (gpio_is_valid(mach->gpio_pullup)) gpio_set_value(mach->gpio_pullup, off_level); else if (mach->udc_command) mach->udc_command(PXA2XX_UDC_CMD_DISCONNECT); @@ -169,7 +169,7 @@ static void pullup_on(void) struct pxa2xx_udc_mach_info *mach = the_controller->mach; int on_level = !mach->gpio_pullup_inverted; - if (mach->gpio_pullup) + if (gpio_is_valid(mach->gpio_pullup)) gpio_set_value(mach->gpio_pullup, on_level); else if (mach->udc_command) mach->udc_command(PXA2XX_UDC_CMD_CONNECT); @@ -1000,7 +1000,7 @@ static int pxa25x_udc_pullup(struct usb_gadget *_gadget, int is_active) udc = container_of(_gadget, struct pxa25x_udc, gadget); /* not all boards support pullup control */ - if (!udc->mach->gpio_pullup && !udc->mach->udc_command) + if (!gpio_is_valid(udc->mach->gpio_pullup) && !udc->mach->udc_command) return -EOPNOTSUPP; udc->pullup = (is_active != 0); @@ -2160,7 +2160,7 @@ static int __init pxa25x_udc_probe(struct platform_device *pdev) dev->dev = &pdev->dev; dev->mach = pdev->dev.platform_data; - if (dev->mach->gpio_vbus) { + if (gpio_is_valid(dev->mach->gpio_vbus)) { if ((retval = gpio_request(dev->mach->gpio_vbus, "pxa25x_udc GPIO VBUS"))) { dev_dbg(&pdev->dev, @@ -2173,7 +2173,7 @@ static int __init pxa25x_udc_probe(struct platform_device *pdev) } else vbus_irq = 0; - if (dev->mach->gpio_pullup) { + if (gpio_is_valid(dev->mach->gpio_pullup)) { if ((retval = gpio_request(dev->mach->gpio_pullup, "pca25x_udc GPIO PULLUP"))) { dev_dbg(&pdev->dev, @@ -2256,10 +2256,10 @@ lubbock_fail0: #endif free_irq(irq, dev); err_irq1: - if (dev->mach->gpio_pullup) + if (gpio_is_valid(dev->mach->gpio_pullup)) gpio_free(dev->mach->gpio_pullup); err_gpio_pullup: - if (dev->mach->gpio_vbus) + if (gpio_is_valid(dev->mach->gpio_vbus)) gpio_free(dev->mach->gpio_vbus); err_gpio_vbus: clk_put(dev->clk); @@ -2294,11 +2294,11 @@ static int __exit pxa25x_udc_remove(struct platform_device *pdev) free_irq(LUBBOCK_USB_IRQ, dev); } #endif - if (dev->mach->gpio_vbus) { + if (gpio_is_valid(dev->mach->gpio_vbus)) { free_irq(gpio_to_irq(dev->mach->gpio_vbus), dev); gpio_free(dev->mach->gpio_vbus); } - if (dev->mach->gpio_pullup) + if (gpio_is_valid(dev->mach->gpio_pullup)) gpio_free(dev->mach->gpio_pullup); clk_put(dev->clk); @@ -2329,7 +2329,7 @@ static int pxa25x_udc_suspend(struct platform_device *dev, pm_message_t state) struct pxa25x_udc *udc = platform_get_drvdata(dev); unsigned long flags; - if (!udc->mach->gpio_pullup && !udc->mach->udc_command) + if (!gpio_is_valid(udc->mach->gpio_pullup) && !udc->mach->udc_command) WARNING("USB host won't detect disconnect!\n"); udc->suspended = 1; -- cgit v1.2.3 From 6d84599b3c3a7bccc04ec4133220d150b92fe0f8 Mon Sep 17 00:00:00 2001 From: David Brownell Date: Wed, 1 Jul 2009 03:43:58 -0700 Subject: USB: gadget: pxa25x compiler warning fix Fix config-dependent compiler warning: CC drivers/usb/gadget/pxa25x_udc.o drivers/usb/gadget/pxa25x_udc.c: In function 'pxa25x_udc_irq': drivers/usb/gadget/pxa25x_udc.c:1806: warning: array subscript is above array bounds Signed-off-by: David Brownell Signed-off-by: Greg Kroah-Hartman --- drivers/usb/gadget/pxa25x_udc.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/usb/gadget/pxa25x_udc.c b/drivers/usb/gadget/pxa25x_udc.c index e51c29a5f84..ed21e263f83 100644 --- a/drivers/usb/gadget/pxa25x_udc.c +++ b/drivers/usb/gadget/pxa25x_udc.c @@ -1802,11 +1802,13 @@ pxa25x_udc_irq(int irq, void *_dev) USIR0 |= tmp; handled = 1; } +#ifndef CONFIG_USB_PXA25X_SMALL if (usir1 & tmp) { handle_ep(&dev->ep[i+8]); USIR1 |= tmp; handled = 1; } +#endif } } -- cgit v1.2.3 From 89368d3d11a5b2eff83ad8e752be67f77a372bad Mon Sep 17 00:00:00 2001 From: David Brownell Date: Wed, 1 Jul 2009 03:36:16 -0700 Subject: USB: musb: silence "suspend as a_wait_vrise is_active" msgs Get rid of some obnoxious and inappropriate messaging, mostly on DaVinci, when usbcore tries to autosuspend a root hub if just a mini/micro-A connector is connected. Symptom: endless stream of messages reading like: musb_bus_suspend 2221: trying to suspend as a_wait_vrise is_active=1 Improve that musb bus suspend primitive a bit. Take advantage of this call to update the OTG state machine if appropriate, moving the device out of the A_WAIT_VRISE state. There's basically no timer for that state transition just now, except with tusb6010; that can make trouble. Signed-off-by: David Brownell Signed-off-by: Greg Kroah-Hartman --- drivers/usb/musb/davinci.c | 5 +++-- drivers/usb/musb/musb_host.c | 25 +++++++++++++++++++++---- 2 files changed, 24 insertions(+), 6 deletions(-) diff --git a/drivers/usb/musb/davinci.c b/drivers/usb/musb/davinci.c index 992b516efd8..e16ff605c45 100644 --- a/drivers/usb/musb/davinci.c +++ b/drivers/usb/musb/davinci.c @@ -330,7 +330,6 @@ static irqreturn_t davinci_interrupt(int irq, void *__hci) mod_timer(&otg_workaround, jiffies + POLL_SECONDS * HZ); WARNING("VBUS error workaround (delay coming)\n"); } else if (is_host_enabled(musb) && drvvbus) { - musb->is_active = 1; MUSB_HST_MODE(musb); musb->xceiv->default_a = 1; musb->xceiv->state = OTG_STATE_A_WAIT_VRISE; @@ -344,7 +343,9 @@ static irqreturn_t davinci_interrupt(int irq, void *__hci) portstate(musb->port1_status &= ~USB_PORT_STAT_POWER); } - /* NOTE: this must complete poweron within 100 msec */ + /* NOTE: this must complete poweron within 100 msec + * (OTG_TIME_A_WAIT_VRISE) but we don't check for that. + */ davinci_source_power(musb, drvvbus, 0); DBG(2, "VBUS %s (%s)%s, devctl %02x\n", drvvbus ? "on" : "off", diff --git a/drivers/usb/musb/musb_host.c b/drivers/usb/musb/musb_host.c index 94a2a350a41..d6ed560e882 100644 --- a/drivers/usb/musb/musb_host.c +++ b/drivers/usb/musb/musb_host.c @@ -2235,13 +2235,30 @@ static void musb_h_stop(struct usb_hcd *hcd) static int musb_bus_suspend(struct usb_hcd *hcd) { struct musb *musb = hcd_to_musb(hcd); + u8 devctl; - if (musb->xceiv->state == OTG_STATE_A_SUSPEND) + if (!is_host_active(musb)) return 0; - if (is_host_active(musb) && musb->is_active) { - WARNING("trying to suspend as %s is_active=%i\n", - otg_state_string(musb), musb->is_active); + switch (musb->xceiv->state) { + case OTG_STATE_A_SUSPEND: + return 0; + case OTG_STATE_A_WAIT_VRISE: + /* ID could be grounded even if there's no device + * on the other end of the cable. NOTE that the + * A_WAIT_VRISE timers are messy with MUSB... + */ + devctl = musb_readb(musb->mregs, MUSB_DEVCTL); + if ((devctl & MUSB_DEVCTL_VBUS) == MUSB_DEVCTL_VBUS) + musb->xceiv->state = OTG_STATE_A_WAIT_BCON; + break; + default: + break; + } + + if (musb->is_active) { + WARNING("trying to suspend as %s while active\n", + otg_state_string(musb)); return -EBUSY; } else return 0; -- cgit v1.2.3 From 5186ffee2320942c3dc9745f7930e0eb15329ca6 Mon Sep 17 00:00:00 2001 From: Arseniy Lartsev Date: Wed, 1 Jul 2009 16:27:26 +0400 Subject: USB: cdc-acm: work around some broken devices This patch introduces a work around for cdc-acm devices which are low speed contrary to the specification, which requires bulk endpoints which are banned in low speed and converted by usbcore to virtual interrupt endpoints if they are used nevertheless. Signed-off-by: Arseniy Lartsev Cc: Oliver Neukum Signed-off-by: Greg Kroah-Hartman --- drivers/usb/class/cdc-acm.c | 31 +++++++++++++++++++++++-------- 1 file changed, 23 insertions(+), 8 deletions(-) diff --git a/drivers/usb/class/cdc-acm.c b/drivers/usb/class/cdc-acm.c index 3f104599347..5b15d9d8896 100644 --- a/drivers/usb/class/cdc-acm.c +++ b/drivers/usb/class/cdc-acm.c @@ -387,6 +387,7 @@ static void acm_rx_tasklet(unsigned long _acm) struct acm_ru *rcv; unsigned long flags; unsigned char throttled; + struct usb_host_endpoint *ep; dbg("Entering acm_rx_tasklet"); @@ -462,11 +463,20 @@ urbs: rcv->buffer = buf; - usb_fill_bulk_urb(rcv->urb, acm->dev, - acm->rx_endpoint, - buf->base, - acm->readsize, - acm_read_bulk, rcv); + ep = (usb_pipein(acm->rx_endpoint) ? acm->dev->ep_in : acm->dev->ep_out) + [usb_pipeendpoint(acm->rx_endpoint)]; + if (usb_endpoint_xfer_int(&ep->desc)) + usb_fill_int_urb(rcv->urb, acm->dev, + acm->rx_endpoint, + buf->base, + acm->readsize, + acm_read_bulk, rcv, ep->desc.bInterval); + else + usb_fill_bulk_urb(rcv->urb, acm->dev, + acm->rx_endpoint, + buf->base, + acm->readsize, + acm_read_bulk, rcv); rcv->urb->transfer_dma = buf->dma; rcv->urb->transfer_flags |= URB_NO_TRANSFER_DMA_MAP; @@ -1227,9 +1237,14 @@ made_compressed_probe: goto alloc_fail7; } - usb_fill_bulk_urb(snd->urb, usb_dev, - usb_sndbulkpipe(usb_dev, epwrite->bEndpointAddress), - NULL, acm->writesize, acm_write_bulk, snd); + if (usb_endpoint_xfer_int(epwrite)) + usb_fill_int_urb(snd->urb, usb_dev, + usb_sndbulkpipe(usb_dev, epwrite->bEndpointAddress), + NULL, acm->writesize, acm_write_bulk, snd, epwrite->bInterval); + else + usb_fill_bulk_urb(snd->urb, usb_dev, + usb_sndbulkpipe(usb_dev, epwrite->bEndpointAddress), + NULL, acm->writesize, acm_write_bulk, snd); snd->urb->transfer_flags |= URB_NO_TRANSFER_DMA_MAP; snd->instance = acm; } -- cgit v1.2.3 From 71f9f6cc9eef47fddc05f34b3d32677ab2e0f1fa Mon Sep 17 00:00:00 2001 From: Dan Williams Date: Tue, 30 Jun 2009 16:09:28 -0400 Subject: USB: option: add Novatel Ovation MC760 Used by Virgin Mobile with the Broadband2Go service, for example. Signed-off-by: Dan Williams Signed-off-by: Greg Kroah-Hartman --- drivers/usb/serial/option.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c index 91c43d76a48..b1bebeee4db 100644 --- a/drivers/usb/serial/option.c +++ b/drivers/usb/serial/option.c @@ -206,6 +206,7 @@ static int option_resume(struct usb_serial *serial); #define NOVATELWIRELESS_PRODUCT_MC950D 0x4400 #define NOVATELWIRELESS_PRODUCT_U727 0x5010 #define NOVATELWIRELESS_PRODUCT_MC760 0x6000 +#define NOVATELWIRELESS_PRODUCT_OVMC760 0x6002 /* FUTURE NOVATEL PRODUCTS */ #define NOVATELWIRELESS_PRODUCT_EVDO_HIGHSPEED 0X6001 @@ -436,6 +437,7 @@ static struct usb_device_id option_ids[] = { { USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_MC727) }, /* Novatel MC727/U727/USB727 */ { USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_U727) }, /* Novatel MC727/U727/USB727 */ { USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_MC760) }, /* Novatel MC760/U760/USB760 */ + { USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_OVMC760) }, /* Novatel Ovation MC760 */ { USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_HSPA_FULLSPEED) }, /* Novatel HSPA product */ { USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_EVDO_EMBEDDED_FULLSPEED) }, /* Novatel EVDO Embedded product */ { USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_HSPA_EMBEDDED_FULLSPEED) }, /* Novatel HSPA Embedded product */ -- cgit v1.2.3 From 87ea8c887905d8b13ae90b537117592ed027632a Mon Sep 17 00:00:00 2001 From: Oliver Neukum Date: Tue, 30 Jun 2009 09:44:24 +0200 Subject: USB: fix uninitialised variable in ti_do_download Signed-off-by: Oliver Neukum Cc: stable Cc: Andrew Morton Signed-off-by: Greg Kroah-Hartman --- drivers/usb/serial/ti_usb_3410_5052.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/usb/serial/ti_usb_3410_5052.c b/drivers/usb/serial/ti_usb_3410_5052.c index 35d8852eeff..14971a92699 100644 --- a/drivers/usb/serial/ti_usb_3410_5052.c +++ b/drivers/usb/serial/ti_usb_3410_5052.c @@ -1657,7 +1657,7 @@ static int ti_do_download(struct usb_device *dev, int pipe, u8 cs = 0; int done; struct ti_firmware_header *header; - int status; + int status = 0; int len; for (pos = sizeof(struct ti_firmware_header); pos < size; pos++) -- cgit v1.2.3 From cb88a1b887bb8908f6e00ce29e893ea52b074940 Mon Sep 17 00:00:00 2001 From: Alan Stern Date: Mon, 29 Jun 2009 10:43:32 -0400 Subject: USB: fix the clear_tt_buffer interface This patch (as1255) updates the interface for calling usb_hub_clear_tt_buffer(). Even the name of the function is changed! When an async URB (i.e., Control or Bulk) going through a high-speed hub to a non-high-speed device is cancelled or fails, the hub's Transaction Translator buffer may be left busy still trying to complete the transaction. The buffer has to be cleared; that's what usb_hub_clear_tt_buffer() does. It isn't safe to send any more URBs to the same endpoint until the TT buffer is fully clear. Therefore the HCD needs to be told when the Clear-TT-Buffer request has finished. This patch adds a callback method to struct hc_driver for that purpose, and makes the hub driver invoke the callback at the proper time. The patch also changes a couple of names; "hub_tt_kevent" and "tt.kevent" now look rather antiquated. Signed-off-by: Alan Stern Cc: stable Signed-off-by: Greg Kroah-Hartman --- drivers/usb/core/hcd.h | 4 ++++ drivers/usb/core/hub.c | 40 ++++++++++++++++++++++++++-------------- drivers/usb/core/hub.h | 6 ++++-- drivers/usb/host/ehci-q.c | 2 +- 4 files changed, 35 insertions(+), 17 deletions(-) diff --git a/drivers/usb/core/hcd.h b/drivers/usb/core/hcd.h index d397ecfd5b1..ec5c67ea07b 100644 --- a/drivers/usb/core/hcd.h +++ b/drivers/usb/core/hcd.h @@ -227,6 +227,10 @@ struct hc_driver { /* has a port been handed over to a companion? */ int (*port_handed_over)(struct usb_hcd *, int); + /* CLEAR_TT_BUFFER completion callback */ + void (*clear_tt_buffer_complete)(struct usb_hcd *, + struct usb_host_endpoint *); + /* xHCI specific functions */ /* Called by usb_alloc_dev to alloc HC device structures */ int (*alloc_dev)(struct usb_hcd *, struct usb_device *); diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c index 2af3b4f0605..71f86c60d83 100644 --- a/drivers/usb/core/hub.c +++ b/drivers/usb/core/hub.c @@ -450,10 +450,10 @@ hub_clear_tt_buffer (struct usb_device *hdev, u16 devinfo, u16 tt) * talking to TTs must queue control transfers (not just bulk and iso), so * both can talk to the same hub concurrently. */ -static void hub_tt_kevent (struct work_struct *work) +static void hub_tt_work(struct work_struct *work) { struct usb_hub *hub = - container_of(work, struct usb_hub, tt.kevent); + container_of(work, struct usb_hub, tt.clear_work); unsigned long flags; int limit = 100; @@ -462,6 +462,7 @@ static void hub_tt_kevent (struct work_struct *work) struct list_head *next; struct usb_tt_clear *clear; struct usb_device *hdev = hub->hdev; + const struct hc_driver *drv; int status; next = hub->tt.clear_list.next; @@ -471,21 +472,25 @@ static void hub_tt_kevent (struct work_struct *work) /* drop lock so HCD can concurrently report other TT errors */ spin_unlock_irqrestore (&hub->tt.lock, flags); status = hub_clear_tt_buffer (hdev, clear->devinfo, clear->tt); - spin_lock_irqsave (&hub->tt.lock, flags); - if (status) dev_err (&hdev->dev, "clear tt %d (%04x) error %d\n", clear->tt, clear->devinfo, status); + + /* Tell the HCD, even if the operation failed */ + drv = clear->hcd->driver; + if (drv->clear_tt_buffer_complete) + (drv->clear_tt_buffer_complete)(clear->hcd, clear->ep); + kfree(clear); + spin_lock_irqsave(&hub->tt.lock, flags); } spin_unlock_irqrestore (&hub->tt.lock, flags); } /** - * usb_hub_tt_clear_buffer - clear control/bulk TT state in high speed hub - * @udev: the device whose split transaction failed - * @pipe: identifies the endpoint of the failed transaction + * usb_hub_clear_tt_buffer - clear control/bulk TT state in high speed hub + * @urb: an URB associated with the failed or incomplete split transaction * * High speed HCDs use this to tell the hub driver that some split control or * bulk transaction failed in a way that requires clearing internal state of @@ -495,8 +500,10 @@ static void hub_tt_kevent (struct work_struct *work) * It may not be possible for that hub to handle additional full (or low) * speed transactions until that state is fully cleared out. */ -void usb_hub_tt_clear_buffer (struct usb_device *udev, int pipe) +int usb_hub_clear_tt_buffer(struct urb *urb) { + struct usb_device *udev = urb->dev; + int pipe = urb->pipe; struct usb_tt *tt = udev->tt; unsigned long flags; struct usb_tt_clear *clear; @@ -508,7 +515,7 @@ void usb_hub_tt_clear_buffer (struct usb_device *udev, int pipe) if ((clear = kmalloc (sizeof *clear, GFP_ATOMIC)) == NULL) { dev_err (&udev->dev, "can't save CLEAR_TT_BUFFER state\n"); /* FIXME recover somehow ... RESET_TT? */ - return; + return -ENOMEM; } /* info that CLEAR_TT_BUFFER needs */ @@ -520,14 +527,19 @@ void usb_hub_tt_clear_buffer (struct usb_device *udev, int pipe) : (USB_ENDPOINT_XFER_BULK << 11); if (usb_pipein (pipe)) clear->devinfo |= 1 << 15; - + + /* info for completion callback */ + clear->hcd = bus_to_hcd(udev->bus); + clear->ep = urb->ep; + /* tell keventd to clear state for this TT */ spin_lock_irqsave (&tt->lock, flags); list_add_tail (&clear->clear_list, &tt->clear_list); - schedule_work (&tt->kevent); + schedule_work(&tt->clear_work); spin_unlock_irqrestore (&tt->lock, flags); + return 0; } -EXPORT_SYMBOL_GPL(usb_hub_tt_clear_buffer); +EXPORT_SYMBOL_GPL(usb_hub_clear_tt_buffer); /* If do_delay is false, return the number of milliseconds the caller * needs to delay. @@ -818,7 +830,7 @@ static void hub_quiesce(struct usb_hub *hub, enum hub_quiescing_type type) if (hub->has_indicators) cancel_delayed_work_sync(&hub->leds); if (hub->tt.hub) - cancel_work_sync(&hub->tt.kevent); + cancel_work_sync(&hub->tt.clear_work); } /* caller has locked the hub device */ @@ -935,7 +947,7 @@ static int hub_configure(struct usb_hub *hub, spin_lock_init (&hub->tt.lock); INIT_LIST_HEAD (&hub->tt.clear_list); - INIT_WORK (&hub->tt.kevent, hub_tt_kevent); + INIT_WORK(&hub->tt.clear_work, hub_tt_work); switch (hdev->descriptor.bDeviceProtocol) { case 0: break; diff --git a/drivers/usb/core/hub.h b/drivers/usb/core/hub.h index 889c0f32a40..de8081f065e 100644 --- a/drivers/usb/core/hub.h +++ b/drivers/usb/core/hub.h @@ -188,16 +188,18 @@ struct usb_tt { /* for control/bulk error recovery (CLEAR_TT_BUFFER) */ spinlock_t lock; struct list_head clear_list; /* of usb_tt_clear */ - struct work_struct kevent; + struct work_struct clear_work; }; struct usb_tt_clear { struct list_head clear_list; unsigned tt; u16 devinfo; + struct usb_hcd *hcd; + struct usb_host_endpoint *ep; }; -extern void usb_hub_tt_clear_buffer(struct usb_device *dev, int pipe); +extern int usb_hub_clear_tt_buffer(struct urb *urb); extern void usb_ep0_reinit(struct usb_device *); #endif /* __LINUX_HUB_H */ diff --git a/drivers/usb/host/ehci-q.c b/drivers/usb/host/ehci-q.c index 1976b1b3778..68bf81e982d 100644 --- a/drivers/usb/host/ehci-q.c +++ b/drivers/usb/host/ehci-q.c @@ -215,7 +215,7 @@ static int qtd_copy_status ( /* REVISIT ARC-derived cores don't clear the root * hub TT buffer in this way... */ - usb_hub_tt_clear_buffer (urb->dev, urb->pipe); + usb_hub_clear_tt_buffer(urb); } } -- cgit v1.2.3 From 914b701280a76f96890ad63eb0fa99bf204b961c Mon Sep 17 00:00:00 2001 From: Alan Stern Date: Mon, 29 Jun 2009 10:47:30 -0400 Subject: USB: EHCI: use the new clear_tt_buffer interface This patch (as1256) changes ehci-hcd and all the other drivers in the EHCI family to make use of the new clear_tt_buffer callbacks. When a Clear-TT-Buffer request is in progress for a QH, the QH is not allowed to be linked into the async schedule until the request is finished. At that time, if there are any URBs queued for the QH, it is linked into the async schedule. Signed-off-by: Alan Stern Cc: stable Signed-off-by: Greg Kroah-Hartman --- drivers/usb/host/ehci-au1xxx.c | 2 + drivers/usb/host/ehci-fsl.c | 2 + drivers/usb/host/ehci-hcd.c | 2 + drivers/usb/host/ehci-ixp4xx.c | 2 + drivers/usb/host/ehci-orion.c | 2 + drivers/usb/host/ehci-pci.c | 2 + drivers/usb/host/ehci-ppc-of.c | 2 + drivers/usb/host/ehci-ps3.c | 2 + drivers/usb/host/ehci-q.c | 91 +++++++++++++++++++++++++++++++----------- drivers/usb/host/ehci.h | 2 + 10 files changed, 86 insertions(+), 23 deletions(-) diff --git a/drivers/usb/host/ehci-au1xxx.c b/drivers/usb/host/ehci-au1xxx.c index c3a778bd359..59d208d94d4 100644 --- a/drivers/usb/host/ehci-au1xxx.c +++ b/drivers/usb/host/ehci-au1xxx.c @@ -113,6 +113,8 @@ static const struct hc_driver ehci_au1xxx_hc_driver = { .bus_resume = ehci_bus_resume, .relinquish_port = ehci_relinquish_port, .port_handed_over = ehci_port_handed_over, + + .clear_tt_buffer_complete = ehci_clear_tt_buffer_complete, }; static int ehci_hcd_au1xxx_drv_probe(struct platform_device *pdev) diff --git a/drivers/usb/host/ehci-fsl.c b/drivers/usb/host/ehci-fsl.c index bf86809c512..991174937db 100644 --- a/drivers/usb/host/ehci-fsl.c +++ b/drivers/usb/host/ehci-fsl.c @@ -325,6 +325,8 @@ static const struct hc_driver ehci_fsl_hc_driver = { .bus_resume = ehci_bus_resume, .relinquish_port = ehci_relinquish_port, .port_handed_over = ehci_port_handed_over, + + .clear_tt_buffer_complete = ehci_clear_tt_buffer_complete, }; static int ehci_fsl_drv_probe(struct platform_device *pdev) diff --git a/drivers/usb/host/ehci-hcd.c b/drivers/usb/host/ehci-hcd.c index 99c75603ec8..7d03549c333 100644 --- a/drivers/usb/host/ehci-hcd.c +++ b/drivers/usb/host/ehci-hcd.c @@ -1003,6 +1003,8 @@ idle_timeout: schedule_timeout_uninterruptible(1); goto rescan; case QH_STATE_IDLE: /* fully unlinked */ + if (qh->clearing_tt) + goto idle_timeout; if (list_empty (&qh->qtd_list)) { qh_put (qh); break; diff --git a/drivers/usb/host/ehci-ixp4xx.c b/drivers/usb/host/ehci-ixp4xx.c index a44bb4a9495..89b7c70c6ed 100644 --- a/drivers/usb/host/ehci-ixp4xx.c +++ b/drivers/usb/host/ehci-ixp4xx.c @@ -61,6 +61,8 @@ static const struct hc_driver ixp4xx_ehci_hc_driver = { #endif .relinquish_port = ehci_relinquish_port, .port_handed_over = ehci_port_handed_over, + + .clear_tt_buffer_complete = ehci_clear_tt_buffer_complete, }; static int ixp4xx_ehci_probe(struct platform_device *pdev) diff --git a/drivers/usb/host/ehci-orion.c b/drivers/usb/host/ehci-orion.c index 770dd9aba62..dc2ac613a9d 100644 --- a/drivers/usb/host/ehci-orion.c +++ b/drivers/usb/host/ehci-orion.c @@ -165,6 +165,8 @@ static const struct hc_driver ehci_orion_hc_driver = { .bus_resume = ehci_bus_resume, .relinquish_port = ehci_relinquish_port, .port_handed_over = ehci_port_handed_over, + + .clear_tt_buffer_complete = ehci_clear_tt_buffer_complete, }; static void __init diff --git a/drivers/usb/host/ehci-pci.c b/drivers/usb/host/ehci-pci.c index f3683e1da16..c2f1b7df918 100644 --- a/drivers/usb/host/ehci-pci.c +++ b/drivers/usb/host/ehci-pci.c @@ -404,6 +404,8 @@ static const struct hc_driver ehci_pci_hc_driver = { .bus_resume = ehci_bus_resume, .relinquish_port = ehci_relinquish_port, .port_handed_over = ehci_port_handed_over, + + .clear_tt_buffer_complete = ehci_clear_tt_buffer_complete, }; /*-------------------------------------------------------------------------*/ diff --git a/drivers/usb/host/ehci-ppc-of.c b/drivers/usb/host/ehci-ppc-of.c index fbd272288fc..36f96da129f 100644 --- a/drivers/usb/host/ehci-ppc-of.c +++ b/drivers/usb/host/ehci-ppc-of.c @@ -79,6 +79,8 @@ static const struct hc_driver ehci_ppc_of_hc_driver = { #endif .relinquish_port = ehci_relinquish_port, .port_handed_over = ehci_port_handed_over, + + .clear_tt_buffer_complete = ehci_clear_tt_buffer_complete, }; diff --git a/drivers/usb/host/ehci-ps3.c b/drivers/usb/host/ehci-ps3.c index 93f7035d00a..1dee33b9139 100644 --- a/drivers/usb/host/ehci-ps3.c +++ b/drivers/usb/host/ehci-ps3.c @@ -75,6 +75,8 @@ static const struct hc_driver ps3_ehci_hc_driver = { #endif .relinquish_port = ehci_relinquish_port, .port_handed_over = ehci_port_handed_over, + + .clear_tt_buffer_complete = ehci_clear_tt_buffer_complete, }; static int __devinit ps3_ehci_probe(struct ps3_system_bus_device *dev) diff --git a/drivers/usb/host/ehci-q.c b/drivers/usb/host/ehci-q.c index 68bf81e982d..e3d2b627bfb 100644 --- a/drivers/usb/host/ehci-q.c +++ b/drivers/usb/host/ehci-q.c @@ -139,6 +139,55 @@ qh_refresh (struct ehci_hcd *ehci, struct ehci_qh *qh) /*-------------------------------------------------------------------------*/ +static void qh_link_async(struct ehci_hcd *ehci, struct ehci_qh *qh); + +static void ehci_clear_tt_buffer_complete(struct usb_hcd *hcd, + struct usb_host_endpoint *ep) +{ + struct ehci_hcd *ehci = hcd_to_ehci(hcd); + struct ehci_qh *qh = ep->hcpriv; + unsigned long flags; + + spin_lock_irqsave(&ehci->lock, flags); + qh->clearing_tt = 0; + if (qh->qh_state == QH_STATE_IDLE && !list_empty(&qh->qtd_list) + && HC_IS_RUNNING(hcd->state)) + qh_link_async(ehci, qh); + spin_unlock_irqrestore(&ehci->lock, flags); +} + +static void ehci_clear_tt_buffer(struct ehci_hcd *ehci, struct ehci_qh *qh, + struct urb *urb, u32 token) +{ + + /* If an async split transaction gets an error or is unlinked, + * the TT buffer may be left in an indeterminate state. We + * have to clear the TT buffer. + * + * Note: this routine is never called for Isochronous transfers. + */ + if (urb->dev->tt && !usb_pipeint(urb->pipe) && !qh->clearing_tt) { +#ifdef DEBUG + struct usb_device *tt = urb->dev->tt->hub; + dev_dbg(&tt->dev, + "clear tt buffer port %d, a%d ep%d t%08x\n", + urb->dev->ttport, urb->dev->devnum, + usb_pipeendpoint(urb->pipe), token); +#endif /* DEBUG */ + if (!ehci_is_TDI(ehci) + || urb->dev->tt->hub != + ehci_to_hcd(ehci)->self.root_hub) { + if (usb_hub_clear_tt_buffer(urb) == 0) + qh->clearing_tt = 1; + } else { + + /* REVISIT ARC-derived cores don't clear the root + * hub TT buffer in this way... + */ + } + } +} + static int qtd_copy_status ( struct ehci_hcd *ehci, struct urb *urb, @@ -195,28 +244,6 @@ static int qtd_copy_status ( usb_pipeendpoint (urb->pipe), usb_pipein (urb->pipe) ? "in" : "out", token, status); - - /* if async CSPLIT failed, try cleaning out the TT buffer */ - if (status != -EPIPE - && urb->dev->tt - && !usb_pipeint(urb->pipe) - && ((token & QTD_STS_MMF) != 0 - || QTD_CERR(token) == 0) - && (!ehci_is_TDI(ehci) - || urb->dev->tt->hub != - ehci_to_hcd(ehci)->self.root_hub)) { -#ifdef DEBUG - struct usb_device *tt = urb->dev->tt->hub; - dev_dbg (&tt->dev, - "clear tt buffer port %d, a%d ep%d t%08x\n", - urb->dev->ttport, urb->dev->devnum, - usb_pipeendpoint (urb->pipe), token); -#endif /* DEBUG */ - /* REVISIT ARC-derived cores don't clear the root - * hub TT buffer in this way... - */ - usb_hub_clear_tt_buffer(urb); - } } return status; @@ -407,9 +434,16 @@ qh_completions (struct ehci_hcd *ehci, struct ehci_qh *qh) /* qh unlinked; token in overlay may be most current */ if (state == QH_STATE_IDLE && cpu_to_hc32(ehci, qtd->qtd_dma) - == qh->hw_current) + == qh->hw_current) { token = hc32_to_cpu(ehci, qh->hw_token); + /* An unlink may leave an incomplete + * async transaction in the TT buffer. + * We have to clear it. + */ + ehci_clear_tt_buffer(ehci, qh, urb, token); + } + /* force halt for unlinked or blocked qh, so we'll * patch the qh later and so that completions can't * activate it while we "know" it's stopped. @@ -435,6 +469,13 @@ halt: && (qtd->hw_alt_next & EHCI_LIST_END(ehci))) last_status = -EINPROGRESS; + + /* As part of low/full-speed endpoint-halt processing + * we must clear the TT buffer (11.17.5). + */ + if (unlikely(last_status != -EINPROGRESS && + last_status != -EREMOTEIO)) + ehci_clear_tt_buffer(ehci, qh, urb, token); } /* if we're removing something not at the queue head, @@ -864,6 +905,10 @@ static void qh_link_async (struct ehci_hcd *ehci, struct ehci_qh *qh) __hc32 dma = QH_NEXT(ehci, qh->qh_dma); struct ehci_qh *head; + /* Don't link a QH if there's a Clear-TT-Buffer pending */ + if (unlikely(qh->clearing_tt)) + return; + /* (re)start the async schedule? */ head = ehci->async; timer_action_done (ehci, TIMER_ASYNC_OFF); diff --git a/drivers/usb/host/ehci.h b/drivers/usb/host/ehci.h index 90ad3395bb2..2bfff30f470 100644 --- a/drivers/usb/host/ehci.h +++ b/drivers/usb/host/ehci.h @@ -354,7 +354,9 @@ struct ehci_qh { unsigned short period; /* polling interval */ unsigned short start; /* where polling starts */ #define NO_FRAME ((unsigned short)~0) /* pick new start */ + struct usb_device *dev; /* access to TT */ + unsigned clearing_tt:1; /* Clear-TT-Buf in progress */ } __attribute__ ((aligned (32))); /*-------------------------------------------------------------------------*/ -- cgit v1.2.3 From ba516de332c0e574457e58fb5aa0293e628b7b10 Mon Sep 17 00:00:00 2001 From: Alan Stern Date: Mon, 29 Jun 2009 17:36:14 -0400 Subject: USB: EHCI: check for STALL before other errors This patch (as1257) revises the way ehci-hcd detects STALLs. The logic is a little peculiar because there's no hardware status bit specifically meant to indicate a STALL. You just have to guess that a STALL was received if the BABBLE bit (which is fatal) isn't set and the transfer stopped before all its retries were used up. The existing code doesn't do this properly, because it tests for MMF (Missed MicroFrame) and DBE (Data Buffer Error) before testing the retry counter. Thus, if a transaction gets either MMF or DBE the corresponding flag is set and the transaction is retried. If the second attempt receives a STALL then -EPIPE is the correct return value. But the existing code would see the MMF or DBE flag instead and return -EPROTO, -ENOSR, or -ECOMM. Signed-off-by: Alan Stern Acked-by: David Brownell Signed-off-by: Greg Kroah-Hartman --- drivers/usb/host/ehci-q.c | 30 ++++++++++++++++-------------- 1 file changed, 16 insertions(+), 14 deletions(-) diff --git a/drivers/usb/host/ehci-q.c b/drivers/usb/host/ehci-q.c index e3d2b627bfb..9a1384747f3 100644 --- a/drivers/usb/host/ehci-q.c +++ b/drivers/usb/host/ehci-q.c @@ -214,6 +214,14 @@ static int qtd_copy_status ( if (token & QTD_STS_BABBLE) { /* FIXME "must" disable babbling device's port too */ status = -EOVERFLOW; + /* CERR nonzero + halt --> stall */ + } else if (QTD_CERR(token)) { + status = -EPIPE; + + /* In theory, more than one of the following bits can be set + * since they are sticky and the transaction is retried. + * Which to test first is rather arbitrary. + */ } else if (token & QTD_STS_MMF) { /* fs/ls interrupt xfer missed the complete-split */ status = -EPROTO; @@ -222,21 +230,15 @@ static int qtd_copy_status ( ? -ENOSR /* hc couldn't read data */ : -ECOMM; /* hc couldn't write data */ } else if (token & QTD_STS_XACT) { - /* timeout, bad crc, wrong PID, etc; retried */ - if (QTD_CERR (token)) - status = -EPIPE; - else { - ehci_dbg (ehci, "devpath %s ep%d%s 3strikes\n", - urb->dev->devpath, - usb_pipeendpoint (urb->pipe), - usb_pipein (urb->pipe) ? "in" : "out"); - status = -EPROTO; - } - /* CERR nonzero + no errors + halt --> stall */ - } else if (QTD_CERR (token)) - status = -EPIPE; - else /* unknown */ + /* timeout, bad CRC, wrong PID, etc */ + ehci_dbg(ehci, "devpath %s ep%d%s 3strikes\n", + urb->dev->devpath, + usb_pipeendpoint(urb->pipe), + usb_pipein(urb->pipe) ? "in" : "out"); + status = -EPROTO; + } else { /* unknown */ status = -EPROTO; + } ehci_vdbg (ehci, "dev%d ep%d%s qtd token %08x --> status %d\n", -- cgit v1.2.3 From d794a02111cd3393da69bc7d6dd2b6074bd037cc Mon Sep 17 00:00:00 2001 From: Oliver Neukum Date: Sun, 28 Jun 2009 23:34:14 +0200 Subject: USB: fix memleak in usbfs This patch fixes a memory leak in devio.c::processcompl If writing to user space fails the packet must be discarded, as it already has been removed from the queue of completed packets. Signed-off-by: Oliver Neukum Cc: stable Signed-off-by: Greg Kroah-Hartman --- drivers/usb/core/devio.c | 16 ++++++++++------ 1 file changed, 10 insertions(+), 6 deletions(-) diff --git a/drivers/usb/core/devio.c b/drivers/usb/core/devio.c index 308609039c7..706f18156af 100644 --- a/drivers/usb/core/devio.c +++ b/drivers/usb/core/devio.c @@ -1231,22 +1231,22 @@ static int processcompl(struct async *as, void __user * __user *arg) if (as->userbuffer) if (copy_to_user(as->userbuffer, urb->transfer_buffer, urb->transfer_buffer_length)) - return -EFAULT; + goto err_out; if (put_user(as->status, &userurb->status)) - return -EFAULT; + goto err_out; if (put_user(urb->actual_length, &userurb->actual_length)) - return -EFAULT; + goto err_out; if (put_user(urb->error_count, &userurb->error_count)) - return -EFAULT; + goto err_out; if (usb_endpoint_xfer_isoc(&urb->ep->desc)) { for (i = 0; i < urb->number_of_packets; i++) { if (put_user(urb->iso_frame_desc[i].actual_length, &userurb->iso_frame_desc[i].actual_length)) - return -EFAULT; + goto err_out; if (put_user(urb->iso_frame_desc[i].status, &userurb->iso_frame_desc[i].status)) - return -EFAULT; + goto err_out; } } @@ -1255,6 +1255,10 @@ static int processcompl(struct async *as, void __user * __user *arg) if (put_user(addr, (void __user * __user *)arg)) return -EFAULT; return 0; + +err_out: + free_async(as); + return -EFAULT; } static struct async *reap_as(struct dev_state *ps) -- cgit v1.2.3 From bf7fbb022f0a3da27a2bcf8d7c973c813d942384 Mon Sep 17 00:00:00 2001 From: Frans Pop Date: Fri, 26 Jun 2009 16:10:19 +0200 Subject: USB: add missing class descriptions used in usb/devices file Added descriptions (for WIRELESS_CONTROLLER and MISC) were taken from the usb-devices script now included in usbutils. Also sort the classes in the same order as in include/linux/usb/ch9.h for easier comparison for future updates. Signed-off-by: Frans Pop Signed-off-by: Greg Kroah-Hartman --- drivers/usb/core/devices.c | 10 ++++++---- 1 file changed, 6 insertions(+), 4 deletions(-) diff --git a/drivers/usb/core/devices.c b/drivers/usb/core/devices.c index 73c108d117b..96f11715cd2 100644 --- a/drivers/usb/core/devices.c +++ b/drivers/usb/core/devices.c @@ -136,17 +136,19 @@ static const struct class_info clas_info[] = {USB_CLASS_AUDIO, "audio"}, {USB_CLASS_COMM, "comm."}, {USB_CLASS_HID, "HID"}, - {USB_CLASS_HUB, "hub"}, {USB_CLASS_PHYSICAL, "PID"}, + {USB_CLASS_STILL_IMAGE, "still"}, {USB_CLASS_PRINTER, "print"}, {USB_CLASS_MASS_STORAGE, "stor."}, + {USB_CLASS_HUB, "hub"}, {USB_CLASS_CDC_DATA, "data"}, - {USB_CLASS_APP_SPEC, "app."}, - {USB_CLASS_VENDOR_SPEC, "vend."}, - {USB_CLASS_STILL_IMAGE, "still"}, {USB_CLASS_CSCID, "scard"}, {USB_CLASS_CONTENT_SEC, "c-sec"}, {USB_CLASS_VIDEO, "video"}, + {USB_CLASS_WIRELESS_CONTROLLER, "wlcon"}, + {USB_CLASS_MISC, "misc"}, + {USB_CLASS_APP_SPEC, "app."}, + {USB_CLASS_VENDOR_SPEC, "vend."}, {-1, "unk."} /* leave as last */ }; -- cgit v1.2.3 From 6e4061210150d1d6d388c5fba05f6b49a306a27e Mon Sep 17 00:00:00 2001 From: Jason Wessel Date: Mon, 22 Jun 2009 11:32:20 -0500 Subject: USB: console: Fix regression in usb console on kernel boot The commit 335f8514f200e63d689113d29cb7253a5c282967 introduced a regression which stopped usb consoles from working correctly as a kernel boot console as well as interactive login device. The addition of the serial_close() which in turn calls tty_port_close_start() will change the reference count of port.count and warn about it. The usb console code had previously incremented the port.count to indicate it was making use of the device as a console and the forced change causes a double open on the usb device which leads to a non obvious kernel oops later on when the tty is freed. To fix the problem instead make use of port->console to track if the port is in fact an active console port to avoid double initialization of the usb serial device. The port.count is incremented and decremented only with in the scope of usb_console_setup() for the purpose of the low level driver initialization. Signed-off-by: Jason Wessel Acked-by: Alan Cox Signed-off-by: Greg Kroah-Hartman --- drivers/usb/serial/console.c | 13 +++++++------ drivers/usb/serial/usb-serial.c | 3 ++- 2 files changed, 9 insertions(+), 7 deletions(-) diff --git a/drivers/usb/serial/console.c b/drivers/usb/serial/console.c index 247b61bfb7f..0e4f2e41ace 100644 --- a/drivers/usb/serial/console.c +++ b/drivers/usb/serial/console.c @@ -169,9 +169,11 @@ static int usb_console_setup(struct console *co, char *options) kfree(tty); } } - /* So we know not to kill the hardware on a hangup on this - port. We have also bumped the use count by one so it won't go - idle */ + /* Now that any required fake tty operations are completed restore + * the tty port count */ + --port->port.count; + /* The console is special in terms of closing the device so + * indicate this port is now acting as a system console. */ port->console = 1; retval = 0; @@ -204,7 +206,7 @@ static void usb_console_write(struct console *co, dbg("%s - port %d, %d byte(s)", __func__, port->number, count); - if (!port->port.count) { + if (!port->console) { dbg("%s - port not opened", __func__); return; } @@ -300,8 +302,7 @@ void usb_serial_console_exit(void) { if (usbcons_info.port) { unregister_console(&usbcons); - if (usbcons_info.port->port.count) - usbcons_info.port->port.count--; + usbcons_info.port->console = 0; usbcons_info.port = NULL; } } diff --git a/drivers/usb/serial/usb-serial.c b/drivers/usb/serial/usb-serial.c index a84216464ca..9e6027b3a2e 100644 --- a/drivers/usb/serial/usb-serial.c +++ b/drivers/usb/serial/usb-serial.c @@ -220,7 +220,8 @@ static int serial_open (struct tty_struct *tty, struct file *filp) tty->driver_data = port; tty_port_tty_set(&port->port, tty); - if (port->port.count == 1) { + /* If the console is attached, the device is already open */ + if (port->port.count == 1 && !port->console) { /* lock this module before we call it * this may fail, which means we must bail out, -- cgit v1.2.3 From b34efeeab84e0887b30fee101612a72786ddced2 Mon Sep 17 00:00:00 2001 From: Folkert van Heusden Date: Fri, 19 Jun 2009 22:14:42 +0200 Subject: USB: serial: FTDI with product code FB80 and vendor id 0403 It seems an USB device with vendor id 0403 and product code FB80 has an FTDI serial io chip as well: http://ftdichip.com/Drivers/D2XX.htm This device in fact is a true random generantor by comsci: http://comscire.com/Products/R2000KU/ So the following patch should add support for this device if I am correct. Not tested as I do not own this device (I would like support in the kernel so that my entropybroker application (which distributes entrop data (random values) between servers and clients)). From: Folkert van Heusden Signed-off-by: Greg Kroah-Hartman --- drivers/usb/serial/ftdi_sio.c | 1 + drivers/usb/serial/ftdi_sio.h | 1 + 2 files changed, 2 insertions(+) diff --git a/drivers/usb/serial/ftdi_sio.c b/drivers/usb/serial/ftdi_sio.c index d312b507930..e9e9c78dceb 100644 --- a/drivers/usb/serial/ftdi_sio.c +++ b/drivers/usb/serial/ftdi_sio.c @@ -191,6 +191,7 @@ static struct usb_device_id id_table_combined [] = { { USB_DEVICE(FTDI_VID, FTDI_MTXORB_4_PID) }, { USB_DEVICE(FTDI_VID, FTDI_MTXORB_5_PID) }, { USB_DEVICE(FTDI_VID, FTDI_MTXORB_6_PID) }, + { USB_DEVICE(FTDI_VID, FTDI_R2000KU_TRUE_RNG) }, { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0100_PID) }, { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0101_PID) }, { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0102_PID) }, diff --git a/drivers/usb/serial/ftdi_sio.h b/drivers/usb/serial/ftdi_sio.h index 0c6eb253c4b..62f05e66dda 100644 --- a/drivers/usb/serial/ftdi_sio.h +++ b/drivers/usb/serial/ftdi_sio.h @@ -506,6 +506,7 @@ * * Armin Laeuger originally sent the PID for the UM 100 module. */ +#define FTDI_R2000KU_TRUE_RNG 0xFB80 /* R2000KU TRUE RNG */ #define FTDI_ELV_UR100_PID 0xFB58 /* USB-RS232-Umsetzer (UR 100) */ #define FTDI_ELV_UM100_PID 0xFB5A /* USB-Modul UM 100 */ #define FTDI_ELV_UO100_PID 0xFB5B /* USB-Modul UO 100 */ -- cgit v1.2.3 From 4e19f220d4e84f5728cb7edde36352ab425cfba4 Mon Sep 17 00:00:00 2001 From: David Brownell Date: Fri, 19 Jun 2009 03:09:04 -0700 Subject: USB: RNDIS gadget, fix issues talking from PXA The reworked Ethernet gadget has an RNDIS interop problem when used with the CDC subset driver ... e.g. on PXA 2xx and 3xx hardware, which currently has a hard time talking to MS-Windows hosts. The issue is that Microsoft requires USB_CLASS_COMM. Fix by tweaking the CDC subset driver to not switch to USB_CLASS_VENDOR_SPEC if RNDIS is used in some other device configuration. [ UPDATED: some "statements" were comma-terminated; fix that. ] Signed-off-by: David Brownell Cc: Aric Blumer Cc: stable Signed-off-by: Greg Kroah-Hartman --- drivers/usb/gadget/ether.c | 11 ++++++----- 1 file changed, 6 insertions(+), 5 deletions(-) diff --git a/drivers/usb/gadget/ether.c b/drivers/usb/gadget/ether.c index d006dc652e0..bd102f5052b 100644 --- a/drivers/usb/gadget/ether.c +++ b/drivers/usb/gadget/ether.c @@ -293,15 +293,16 @@ static int __init eth_bind(struct usb_composite_dev *cdev) /* CDC Subset */ eth_config_driver.label = "CDC Subset/SAFE"; - device_desc.idVendor = cpu_to_le16(SIMPLE_VENDOR_NUM), - device_desc.idProduct = cpu_to_le16(SIMPLE_PRODUCT_NUM), - device_desc.bDeviceClass = USB_CLASS_VENDOR_SPEC; + device_desc.idVendor = cpu_to_le16(SIMPLE_VENDOR_NUM); + device_desc.idProduct = cpu_to_le16(SIMPLE_PRODUCT_NUM); + if (!has_rndis()) + device_desc.bDeviceClass = USB_CLASS_VENDOR_SPEC; } if (has_rndis()) { /* RNDIS plus ECM-or-Subset */ - device_desc.idVendor = cpu_to_le16(RNDIS_VENDOR_NUM), - device_desc.idProduct = cpu_to_le16(RNDIS_PRODUCT_NUM), + device_desc.idVendor = cpu_to_le16(RNDIS_VENDOR_NUM); + device_desc.idProduct = cpu_to_le16(RNDIS_PRODUCT_NUM); device_desc.bNumConfigurations = 2; } -- cgit v1.2.3 From e376bbbb6a82cf119c93bde66937f66c72cba27b Mon Sep 17 00:00:00 2001 From: Randy Dunlap Date: Thu, 18 Jun 2009 10:39:11 -0700 Subject: USB: usb.h: fix kernel-doc notation Fix usb.h kernel-doc warnings: Warning(include/linux/usb.h:918): Excess struct/union/enum/typedef member 'nodename' description in 'usb_device_driver' Warning(include/linux/usb.h:939): No description found for parameter 'nodename' Warning(include/linux/usb.h:1219): No description found for parameter 'sg' Warning(include/linux/usb.h:1219): No description found for parameter 'num_sgs' Signed-off-by: Randy Dunlap Signed-off-by: Greg Kroah-Hartman --- include/linux/usb.h | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) diff --git a/include/linux/usb.h b/include/linux/usb.h index 84929e91403..b1e3c2fbfe1 100644 --- a/include/linux/usb.h +++ b/include/linux/usb.h @@ -888,8 +888,6 @@ struct usb_driver { * struct usb_device_driver - identifies USB device driver to usbcore * @name: The driver name should be unique among USB drivers, * and should normally be the same as the module name. - * @nodename: Callback to provide a naming hint for a possible - * device node to create. * @probe: Called to see if the driver is willing to manage a particular * device. If it is, probe returns zero and uses dev_set_drvdata() * to associate driver-specific data with the device. If unwilling @@ -924,6 +922,8 @@ extern struct bus_type usb_bus_type; /** * struct usb_class_driver - identifies a USB driver that wants to use the USB major number * @name: the usb class device name for this driver. Will show up in sysfs. + * @nodename: Callback to provide a naming hint for a possible + * device node to create. * @fops: pointer to the struct file_operations of this driver. * @minor_base: the start of the minor range for this driver. * @@ -1046,6 +1046,8 @@ typedef void (*usb_complete_t)(struct urb *); * the device driver is saying that it provided this DMA address, * which the host controller driver should use in preference to the * transfer_buffer. + * @sg: scatter gather buffer list + * @num_sgs: number of entries in the sg list * @transfer_buffer_length: How big is transfer_buffer. The transfer may * be broken up into chunks according to the current maximum packet * size for the endpoint, which is a function of the configuration -- cgit v1.2.3 From e12df02a171d1c10ee664e6571c0e4cb7e1b7c92 Mon Sep 17 00:00:00 2001 From: Greg Kroah-Hartman Date: Thu, 9 Jul 2009 21:35:49 -0700 Subject: Revert USB: usbfs: deprecate and hide option for !embedded This reverts commit cc71329b3b89b4a5be849b617f2c4f151f0b9213, so that Red Hat machines can boot properly. It seems that the Red Hat initrd code tries to watch the /proc/bus/usb/devices file to monitor usb devices showing up. While this task is prone to lots of races and does not show the true state of the system, they seem to like it. So for now, don't move this option under the EMBEDDED config option. Cc: Scott James Remnant Cc: Kay Sievers Cc: Dave Airlie Cc: Peter Jones Cc: Jeff Chua Cc: Dave Jones Signed-off-by: Greg Kroah-Hartman --- drivers/usb/core/Kconfig | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/usb/core/Kconfig b/drivers/usb/core/Kconfig index 69280c35b5c..ad925946f86 100644 --- a/drivers/usb/core/Kconfig +++ b/drivers/usb/core/Kconfig @@ -28,7 +28,7 @@ comment "Miscellaneous USB options" depends on USB config USB_DEVICEFS - bool "USB device filesystem (DEPRECATED)" if EMBEDDED + bool "USB device filesystem (DEPRECATED)" depends on USB ---help--- If you say Y here (and to "/proc file system support" in the "File -- cgit v1.2.3 From b760dac290c3482e6883d5f79a2357c82239a3ff Mon Sep 17 00:00:00 2001 From: Martin Geleynse Date: Thu, 2 Jul 2009 13:10:35 -0400 Subject: USB: ftdi: support NDI devices It enhances the driver for FTDI-based USB serial adapters to recognize and support Northern Digital Inc (NDI) measurement equipment. NDI has been providing this patch for various kernel flavors for several years and we would like to see these changes built in to the driver so that our equipement works without the need for customers to patch the kernel themselves. The patch makes small modifications to 2 files: ./drivers/usb/serial/ftdi_sio.c and ./drivers/usb/serial/ftdi_sio.h. It accomplishes 3 things: 1. Define the VID and PIDs to allow the driver to recognize the NDI devices. 2. Map the 19200 baud rate setting to our higher baud rate of 1.2Mb We would have chosen to map 38400 to the higher rate, similar to what several other vendors have done, but some of our legacy customers actually use 38400, therefore we remap 19200 to the higher rate. 3. We set the default transmit latency in the FTDI chip to 1ms for our devices. Our devices are typically polled at 60Hz and the default ftdi latency seriously affects turn-around time and results in missed data frames. We have created a modprobe option that allows this setting to be increased. This has proven necessary particularly in some virtualized environments. Signed-off-by: Martin P. Geleynse Signed-off-by: Greg Kroah-Hartman --- drivers/usb/serial/ftdi_sio.c | 61 ++++++++++++++++++++++++++++++++++++++++++- drivers/usb/serial/ftdi_sio.h | 12 ++++++--- 2 files changed, 69 insertions(+), 4 deletions(-) diff --git a/drivers/usb/serial/ftdi_sio.c b/drivers/usb/serial/ftdi_sio.c index e9e9c78dceb..88eb5878914 100644 --- a/drivers/usb/serial/ftdi_sio.c +++ b/drivers/usb/serial/ftdi_sio.c @@ -107,6 +107,7 @@ struct ftdi_sio_quirk { static int ftdi_jtag_probe(struct usb_serial *serial); static int ftdi_mtxorb_hack_setup(struct usb_serial *serial); +static int ftdi_NDI_device_setup(struct usb_serial *serial); static void ftdi_USB_UIRT_setup(struct ftdi_private *priv); static void ftdi_HE_TIRA1_setup(struct ftdi_private *priv); @@ -118,6 +119,10 @@ static struct ftdi_sio_quirk ftdi_mtxorb_hack_quirk = { .probe = ftdi_mtxorb_hack_setup, }; +static struct ftdi_sio_quirk ftdi_NDI_device_quirk = { + .probe = ftdi_NDI_device_setup, +}; + static struct ftdi_sio_quirk ftdi_USB_UIRT_quirk = { .port_probe = ftdi_USB_UIRT_setup, }; @@ -648,6 +653,16 @@ static struct usb_device_id id_table_combined [] = { { USB_DEVICE(FTDI_VID, FTDI_TACTRIX_OPENPORT_13S_PID) }, { USB_DEVICE(FTDI_VID, FTDI_TACTRIX_OPENPORT_13U_PID) }, { USB_DEVICE(ELEKTOR_VID, ELEKTOR_FT323R_PID) }, + { USB_DEVICE(FTDI_VID, FTDI_NDI_HUC_PID), + .driver_info = (kernel_ulong_t)&ftdi_NDI_device_quirk }, + { USB_DEVICE(FTDI_VID, FTDI_NDI_SPECTRA_SCU_PID), + .driver_info = (kernel_ulong_t)&ftdi_NDI_device_quirk }, + { USB_DEVICE(FTDI_VID, FTDI_NDI_FUTURE_2_PID), + .driver_info = (kernel_ulong_t)&ftdi_NDI_device_quirk }, + { USB_DEVICE(FTDI_VID, FTDI_NDI_FUTURE_3_PID), + .driver_info = (kernel_ulong_t)&ftdi_NDI_device_quirk }, + { USB_DEVICE(FTDI_VID, FTDI_NDI_AURORA_SCU_PID), + .driver_info = (kernel_ulong_t)&ftdi_NDI_device_quirk }, { USB_DEVICE(TELLDUS_VID, TELLDUS_TELLSTICK_PID) }, { USB_DEVICE(FTDI_VID, FTDI_MAXSTREAM_PID) }, { USB_DEVICE(FTDI_VID, FTDI_PHI_FISCO_PID) }, @@ -671,7 +686,6 @@ static struct usb_device_id id_table_combined [] = { { USB_DEVICE(FTDI_VID, FTDI_DOMINTELL_DUSB_PID) }, { USB_DEVICE(ALTI2_VID, ALTI2_N3_PID) }, { USB_DEVICE(FTDI_VID, DIEBOLD_BCS_SE923_PID) }, - { USB_DEVICE(FTDI_VID, FTDI_NDI_HUC_PID) }, { USB_DEVICE(ATMEL_VID, STK541_PID) }, { USB_DEVICE(DE_VID, STB_PID) }, { USB_DEVICE(DE_VID, WHT_PID) }, @@ -1027,6 +1041,16 @@ static __u32 get_ftdi_divisor(struct tty_struct *tty, case FT2232C: /* FT2232C chip */ case FT232RL: if (baud <= 3000000) { + __u16 product_id = le16_to_cpu( + port->serial->dev->descriptor.idProduct); + if (((FTDI_NDI_HUC_PID == product_id) || + (FTDI_NDI_SPECTRA_SCU_PID == product_id) || + (FTDI_NDI_FUTURE_2_PID == product_id) || + (FTDI_NDI_FUTURE_3_PID == product_id) || + (FTDI_NDI_AURORA_SCU_PID == product_id)) && + (baud == 19200)) { + baud = 1200000; + } div_value = ftdi_232bm_baud_to_divisor(baud); } else { dbg("%s - Baud rate too high!", __func__); @@ -1557,6 +1581,39 @@ static void ftdi_HE_TIRA1_setup(struct ftdi_private *priv) priv->force_rtscts = 1; } /* ftdi_HE_TIRA1_setup */ +/* + * Module parameter to control latency timer for NDI FTDI-based USB devices. + * If this value is not set in modprobe.conf.local its value will be set to 1ms. + */ +static int ndi_latency_timer = 1; + +/* Setup for the NDI FTDI-based USB devices, which requires hardwired + * baudrate (19200 gets mapped to 1200000). + * + * Called from usbserial:serial_probe. + */ +static int ftdi_NDI_device_setup(struct usb_serial *serial) +{ + struct usb_device *udev = serial->dev; + int latency = ndi_latency_timer; + int rv = 0; + char buf[1]; + + if (latency == 0) + latency = 1; + if (latency > 99) + latency = 99; + + dbg("%s setting NDI device latency to %d", __func__, latency); + dev_info(&udev->dev, "NDI device with a latency value of %d", latency); + + rv = usb_control_msg(udev, usb_sndctrlpipe(udev, 0), + FTDI_SIO_SET_LATENCY_TIMER_REQUEST, + FTDI_SIO_SET_LATENCY_TIMER_REQUEST_TYPE, + latency, 0, buf, 0, WDR_TIMEOUT); + return 0; +} + /* * First port on JTAG adaptors such as Olimex arm-usb-ocd or the FIC/OpenMoko * Neo1973 Debug Board is reserved for JTAG interface and can be accessed from @@ -2626,3 +2683,5 @@ MODULE_PARM_DESC(vendor, "User specified vendor ID (default=" module_param(product, ushort, 0); MODULE_PARM_DESC(product, "User specified product ID"); +module_param(ndi_latency_timer, int, S_IRUGO | S_IWUSR); +MODULE_PARM_DESC(ndi_latency_timer, "NDI device latency timer override"); diff --git a/drivers/usb/serial/ftdi_sio.h b/drivers/usb/serial/ftdi_sio.h index 62f05e66dda..36dc7cd3499 100644 --- a/drivers/usb/serial/ftdi_sio.h +++ b/drivers/usb/serial/ftdi_sio.h @@ -739,6 +739,15 @@ /* Pyramid Computer GmbH */ #define FTDI_PYRAMID_PID 0xE6C8 /* Pyramid Appliance Display */ +/* + * NDI (www.ndigital.com) product ids + */ +#define FTDI_NDI_HUC_PID 0xDA70 /* NDI Host USB Converter */ +#define FTDI_NDI_SPECTRA_SCU_PID 0xDA71 /* NDI Spectra SCU */ +#define FTDI_NDI_FUTURE_2_PID 0xDA72 /* NDI future device #2 */ +#define FTDI_NDI_FUTURE_3_PID 0xDA73 /* NDI future device #3 */ +#define FTDI_NDI_AURORA_SCU_PID 0xDA74 /* NDI Aurora SCU */ + /* * Posiflex inc retail equipment (http://www.posiflex.com.tw) */ @@ -852,9 +861,6 @@ #define TML_VID 0x1B91 /* Vendor ID */ #define TML_USB_SERIAL_PID 0x0064 /* USB - Serial Converter */ -/* NDI Polaris System */ -#define FTDI_NDI_HUC_PID 0xDA70 - /* Propox devices */ #define FTDI_PROPOX_JTAGCABLEII_PID 0xD738 -- cgit v1.2.3 From 04950737d6bed9d234483216ee36ed760d9404eb Mon Sep 17 00:00:00 2001 From: Randy Dunlap Date: Fri, 3 Jul 2009 13:26:57 -0700 Subject: USB: gadget audio: select SND_PCM Fix USB gadget audio: select SND_PCM, like many other sound drivers do, to fix build errors: drivers/built-in.o: In function `f_audio_playback_work': audio.c:(.text+0x15a3e7): undefined reference to `snd_pcm_kernel_ioctl' audio.c:(.text+0x15a471): undefined reference to `snd_pcm_lib_write' drivers/built-in.o: In function `_snd_pcm_hw_param_set': audio.c:(.text+0x15aca7): undefined reference to `snd_interval_refine' drivers/built-in.o: In function `gaudio_setup': (.init.text+0x12adf): undefined reference to `_snd_pcm_hw_params_any' drivers/built-in.o: In function `gaudio_setup': (.init.text+0x12b43): undefined reference to `snd_pcm_kernel_ioctl' Signed-off-by: Randy Dunlap Acked-by: David Brownell Signed-off-by: Greg Kroah-Hartman --- drivers/usb/gadget/Kconfig | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/usb/gadget/Kconfig b/drivers/usb/gadget/Kconfig index 61518c9cdaa..7f8e83a954a 100644 --- a/drivers/usb/gadget/Kconfig +++ b/drivers/usb/gadget/Kconfig @@ -604,6 +604,7 @@ config USB_ZERO_HNPTEST config USB_AUDIO tristate "Audio Gadget (EXPERIMENTAL)" depends on SND + select SND_PCM help Gadget Audio is compatible with USB Audio Class specification 1.0. It will include at least one AudioControl interface, zero or more -- cgit v1.2.3 From 2ab2178c3303583a0551f6b6bf4ba070afbf875f Mon Sep 17 00:00:00 2001 From: Jonathan McDowell Date: Sun, 5 Jul 2009 12:29:51 +0100 Subject: USB: Fix option_ms regression in 2.6.31-rc2 Commit 32ebbe7b6ad44ae9c276419710b56de6ba705303 which filters the SCSI REZERO command in option_ms based on a SCSI INQUIRY with a vendor of Option breaks my Option Icon 225 (0af0:6971). This device returns a vendor of ZCOPTION for the ZeroCD device. The following trivial patch fixes things for me. Signed-Off-By: Jonathan McDowell Signed-off-by: Greg Kroah-Hartman --- drivers/usb/storage/option_ms.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/drivers/usb/storage/option_ms.c b/drivers/usb/storage/option_ms.c index d41cc0a970f..773a5cd38c5 100644 --- a/drivers/usb/storage/option_ms.c +++ b/drivers/usb/storage/option_ms.c @@ -118,6 +118,9 @@ static int option_inquiry(struct us_data *us) result = memcmp(buffer+8, "Option", 6); + if (result != 0) + result = memcmp(buffer+8, "ZCOPTION", 8); + /* Read the CSW */ usb_stor_bulk_transfer_buf(us, us->recv_bulk_pipe, -- cgit v1.2.3 From 0601e116e30caf35520522cb621d05866663cab2 Mon Sep 17 00:00:00 2001 From: Amit Kucheria Date: Mon, 6 Jul 2009 14:19:59 +0300 Subject: USB: Serial: Add support for Arkham Technology adapters As reported by David Potts from Arkham Technology, the current driver works with their hardware on addition of the device ids. Signed-off-by: Amit Kucheria Signed-off-by: Greg Kroah-Hartman --- drivers/usb/serial/cp210x.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/usb/serial/cp210x.c b/drivers/usb/serial/cp210x.c index 2b9eeda62bf..e9a40b820fd 100644 --- a/drivers/usb/serial/cp210x.c +++ b/drivers/usb/serial/cp210x.c @@ -67,6 +67,8 @@ static struct usb_device_id id_table [] = { { USB_DEVICE(0x10AB, 0x10C5) }, /* Siemens MC60 Cable */ { USB_DEVICE(0x10B5, 0xAC70) }, /* Nokia CA-42 USB */ { USB_DEVICE(0x10C4, 0x0F91) }, /* Vstabi */ + { USB_DEVICE(0x10C4, 0x1101) }, /* Arkham Technology DS101 Bus Monitor */ + { USB_DEVICE(0x10C4, 0x1601) }, /* Arkham Technology DS101 Adapter */ { USB_DEVICE(0x10C4, 0x800A) }, /* SPORTident BSM7-D-USB main station */ { USB_DEVICE(0x10C4, 0x803B) }, /* Pololu USB-serial converter */ { USB_DEVICE(0x10C4, 0x8053) }, /* Enfora EDG1228 */ -- cgit v1.2.3 From c3325eb16d36a49f9a5ae09241c418cfd1d3f4f5 Mon Sep 17 00:00:00 2001 From: Anssi Hannula Date: Mon, 6 Jul 2009 19:08:59 +0300 Subject: USB: option.c: add A-Link 3GU device id Add A-Link 3GU device id 1e0e:9200 into option driver. The device has 4 interfaces, of which 1 is handled by storage and the other 3 by option driver. The device appears first as CD-only 1e0e:f000 device and must be switched to 1e0e:9200 mode either by using "eject CD" or usb_modeswitch. For the record, the device does not work with generic usbserial driver (usb disconnect when sending the ATDT command). Signed-off-by: Anssi Hannula Signed-off-by: Greg Kroah-Hartman --- drivers/usb/serial/option.c | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-) diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c index b1bebeee4db..4526064752f 100644 --- a/drivers/usb/serial/option.c +++ b/drivers/usb/serial/option.c @@ -319,6 +319,9 @@ static int option_resume(struct usb_serial *serial); #define TOSHIBA_VENDOR_ID 0x0930 #define TOSHIBA_PRODUCT_HSDPA_MINICARD 0x1302 +#define ALINK_VENDOR_ID 0x1e0e +#define ALINK_PRODUCT_3GU 0x9200 + static struct usb_device_id option_ids[] = { { USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_COLT) }, { USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_RICOLA) }, @@ -542,7 +545,8 @@ static struct usb_device_id option_ids[] = { { USB_DEVICE(QISDA_VENDOR_ID, QISDA_PRODUCT_H20_4515) }, { USB_DEVICE(QISDA_VENDOR_ID, QISDA_PRODUCT_H20_4519) }, { USB_DEVICE(TOSHIBA_VENDOR_ID, TOSHIBA_PRODUCT_HSDPA_MINICARD ) }, /* Toshiba 3G HSDPA == Novatel Expedite EU870D MiniCard */ - { USB_DEVICE(0x1e0e, 0x9000) }, + { USB_DEVICE(ALINK_VENDOR_ID, 0x9000) }, + { USB_DEVICE_AND_INTERFACE_INFO(ALINK_VENDOR_ID, ALINK_PRODUCT_3GU, 0xff, 0xff, 0xff) }, { } /* Terminating entry */ }; MODULE_DEVICE_TABLE(usb, option_ids); -- cgit v1.2.3 From 7bae0a070db4bc2761dd9515f450cdfa3f3f248c Mon Sep 17 00:00:00 2001 From: Alan Stern Date: Tue, 7 Jul 2009 09:50:14 -0400 Subject: USB: Sierra: fix oops upon device close This patch (as1263) fixes a mixup that occurred when conflicting patches for the sierra driver were merged incorrectly. The former sierra_shutdown routine should have been become sierra_release, not sierra_disconnect. The symptom this fixes is an oops when the device file is closed after a Sierra device has been unplugged (Bugzilla #13675). Signed-off-by: Alan Stern Tested-by: Peter Naulls Signed-off-by: Greg Kroah-Hartman --- drivers/usb/serial/sierra.c | 5 ++--- 1 file changed, 2 insertions(+), 3 deletions(-) diff --git a/drivers/usb/serial/sierra.c b/drivers/usb/serial/sierra.c index 032f7aeb40a..5062815baed 100644 --- a/drivers/usb/serial/sierra.c +++ b/drivers/usb/serial/sierra.c @@ -814,7 +814,7 @@ static int sierra_startup(struct usb_serial *serial) return 0; } -static void sierra_disconnect(struct usb_serial *serial) +static void sierra_release(struct usb_serial *serial) { int i; struct usb_serial_port *port; @@ -830,7 +830,6 @@ static void sierra_disconnect(struct usb_serial *serial) if (!portdata) continue; kfree(portdata); - usb_set_serial_port_data(port, NULL); } } @@ -853,7 +852,7 @@ static struct usb_serial_driver sierra_device = { .tiocmget = sierra_tiocmget, .tiocmset = sierra_tiocmset, .attach = sierra_startup, - .disconnect = sierra_disconnect, + .release = sierra_release, .read_int_callback = sierra_instat_callback, }; -- cgit v1.2.3 From 516a1a07f0219d6672fb6b8e49fb9d5d533c2e89 Mon Sep 17 00:00:00 2001 From: Oliver Neukum Date: Wed, 8 Jul 2009 19:09:23 +0200 Subject: USB: fix race leading to a write after kfree in usbfs this fixes a race between async_completed() and proc_reapurbnonblock(). CPU A CPU B spin_lock(&ps->lock); list_move_tail(&as->asynclist, &ps->async_completed); spin_unlock(&ps->lock); if (!(as = async_getcompleted(ps))) return -EAGAIN; return processcompl(as, (void __user * __user *)arg); processcompl() calls free_async() which calls kfree(as) as->status = urb->status; if (as->signr) { sinfo.si_signo = as->signr; sinfo.si_errno = as->status; sinfo.si_code = SI_ASYNCIO; sinfo.si_addr = as->userurb; kill_pid_info_as_uid(as->signr, &sinfo, as->pid, as->uid, as->euid, as->secid); } snoop(&urb->dev->dev, "urb complete\n"); snoop_urb(urb, as->userurb); write after kfree Signed-off-by: Oliver Neukum --- drivers/usb/core/devio.c | 21 +++++++++++++++++---- 1 file changed, 17 insertions(+), 4 deletions(-) diff --git a/drivers/usb/core/devio.c b/drivers/usb/core/devio.c index 706f18156af..46ca2af5ef1 100644 --- a/drivers/usb/core/devio.c +++ b/drivers/usb/core/devio.c @@ -325,21 +325,34 @@ static void async_completed(struct urb *urb) struct async *as = urb->context; struct dev_state *ps = as->ps; struct siginfo sinfo; + struct pid *pid = NULL; + uid_t uid = 0; + uid_t euid = 0; + u32 secid = 0; + int signr; spin_lock(&ps->lock); list_move_tail(&as->asynclist, &ps->async_completed); - spin_unlock(&ps->lock); as->status = urb->status; - if (as->signr) { + signr = as->signr; + if (signr) { sinfo.si_signo = as->signr; sinfo.si_errno = as->status; sinfo.si_code = SI_ASYNCIO; sinfo.si_addr = as->userurb; - kill_pid_info_as_uid(as->signr, &sinfo, as->pid, as->uid, - as->euid, as->secid); + pid = as->pid; + uid = as->uid; + euid = as->euid; + secid = as->secid; } snoop(&urb->dev->dev, "urb complete\n"); snoop_urb(urb, as->userurb); + spin_unlock(&ps->lock); + + if (signr) + kill_pid_info_as_uid(sinfo.si_signo, &sinfo, pid, uid, + euid, secid); + wake_up(&ps->wait); } -- cgit v1.2.3 From 145114125cf07afc91e5b132ec41c353284cdb2a Mon Sep 17 00:00:00 2001 From: Krzysztof Halasa Date: Fri, 10 Jul 2009 01:06:23 +0200 Subject: USB serial: Add ID for Turtelizer, an FT2232L-based JTAG/RS-232 adapter. MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Adds USB ID for Turtelizer, an FT2232L-based JTAG/RS-232 adapter. Signed-off-by: Krzysztof Ha³asa Signed-off-by: Greg Kroah-Hartman --- drivers/usb/serial/ftdi_sio.c | 2 ++ drivers/usb/serial/ftdi_sio.h | 2 ++ 2 files changed, 4 insertions(+) diff --git a/drivers/usb/serial/ftdi_sio.c b/drivers/usb/serial/ftdi_sio.c index 88eb5878914..d5ea072f382 100644 --- a/drivers/usb/serial/ftdi_sio.c +++ b/drivers/usb/serial/ftdi_sio.c @@ -679,6 +679,8 @@ static struct usb_device_id id_table_combined [] = { .driver_info = (kernel_ulong_t)&ftdi_jtag_quirk }, { USB_DEVICE(FTDI_VID, LMI_LM3S_EVAL_BOARD_PID), .driver_info = (kernel_ulong_t)&ftdi_jtag_quirk }, + { USB_DEVICE(FTDI_VID, FTDI_TURTELIZER_PID), + .driver_info = (kernel_ulong_t)&ftdi_jtag_quirk }, { USB_DEVICE(RATOC_VENDOR_ID, RATOC_PRODUCT_ID_USB60F) }, { USB_DEVICE(FTDI_VID, FTDI_REU_TINY_PID) }, { USB_DEVICE(PAPOUCH_VID, PAPOUCH_QUIDO4x4_PID) }, diff --git a/drivers/usb/serial/ftdi_sio.h b/drivers/usb/serial/ftdi_sio.h index 36dc7cd3499..c9fbd741509 100644 --- a/drivers/usb/serial/ftdi_sio.h +++ b/drivers/usb/serial/ftdi_sio.h @@ -944,6 +944,8 @@ #define MARVELL_VID 0x9e88 #define MARVELL_SHEEVAPLUG_PID 0x9e8f +#define FTDI_TURTELIZER_PID 0xBDC8 /* JTAG/RS-232 adapter by egnite GmBH */ + /* * BmRequestType: 1100 0000b * bRequest: FTDI_E2_READ -- cgit v1.2.3 From c5f3d87d61a116fdf2e4a2804d5e32cf8a4eeac7 Mon Sep 17 00:00:00 2001 From: Elina Pasheva Date: Thu, 9 Jul 2009 17:55:18 -0700 Subject: USB: serial: sierra driver id_table additions - Updated the id_table with all devices that Sierra Wireless currently support - Re-ordered the contents of the id_table for better readability Signed-off-by: Elina Pasheva Signed-off-by: Greg Kroah-Hartman --- drivers/usb/serial/sierra.c | 46 ++++++++++++++++++++++++++++----------------- 1 file changed, 29 insertions(+), 17 deletions(-) diff --git a/drivers/usb/serial/sierra.c b/drivers/usb/serial/sierra.c index 5062815baed..f48d05e0acc 100644 --- a/drivers/usb/serial/sierra.c +++ b/drivers/usb/serial/sierra.c @@ -181,35 +181,50 @@ static const struct sierra_iface_info direct_ip_interface_blacklist = { }; static struct usb_device_id id_table [] = { + { USB_DEVICE(0x0F3D, 0x0112) }, /* Airprime/Sierra PC 5220 */ + { USB_DEVICE(0x03F0, 0x1B1D) }, /* HP ev2200 a.k.a MC5720 */ + { USB_DEVICE(0x03F0, 0x1E1D) }, /* HP hs2300 a.k.a MC8775 */ + { USB_DEVICE(0x1199, 0x0017) }, /* Sierra Wireless EM5625 */ { USB_DEVICE(0x1199, 0x0018) }, /* Sierra Wireless MC5720 */ { USB_DEVICE(0x1199, 0x0218) }, /* Sierra Wireless MC5720 */ - { USB_DEVICE(0x03f0, 0x1b1d) }, /* HP ev2200 a.k.a MC5720 */ { USB_DEVICE(0x1199, 0x0020) }, /* Sierra Wireless MC5725 */ - { USB_DEVICE(0x1199, 0x0024) }, /* Sierra Wireless MC5727 */ { USB_DEVICE(0x1199, 0x0220) }, /* Sierra Wireless MC5725 */ + { USB_DEVICE(0x1199, 0x0022) }, /* Sierra Wireless EM5725 */ + { USB_DEVICE(0x1199, 0x0024) }, /* Sierra Wireless MC5727 */ + { USB_DEVICE(0x1199, 0x0224) }, /* Sierra Wireless MC5727 */ { USB_DEVICE(0x1199, 0x0019) }, /* Sierra Wireless AirCard 595 */ { USB_DEVICE(0x1199, 0x0021) }, /* Sierra Wireless AirCard 597E */ + { USB_DEVICE(0x1199, 0x0112) }, /* Sierra Wireless AirCard 580 */ { USB_DEVICE(0x1199, 0x0120) }, /* Sierra Wireless USB Dongle 595U */ - /* Sierra Wireless C597 */ + /* Sierra Wireless C597 */ { USB_DEVICE_AND_INTERFACE_INFO(0x1199, 0x0023, 0xFF, 0xFF, 0xFF) }, - /* Sierra Wireless Device */ + /* Sierra Wireless T598 */ { USB_DEVICE_AND_INTERFACE_INFO(0x1199, 0x0025, 0xFF, 0xFF, 0xFF) }, - { USB_DEVICE(0x1199, 0x0026) }, /* Sierra Wireless Device */ - { USB_DEVICE(0x1199, 0x0027) }, /* Sierra Wireless Device */ - { USB_DEVICE(0x1199, 0x0028) }, /* Sierra Wireless Device */ + { USB_DEVICE(0x1199, 0x0026) }, /* Sierra Wireless T11 */ + { USB_DEVICE(0x1199, 0x0027) }, /* Sierra Wireless AC402 */ + { USB_DEVICE(0x1199, 0x0028) }, /* Sierra Wireless MC5728 */ + { USB_DEVICE(0x1199, 0x0029) }, /* Sierra Wireless Device */ { USB_DEVICE(0x1199, 0x6802) }, /* Sierra Wireless MC8755 */ - { USB_DEVICE(0x1199, 0x6804) }, /* Sierra Wireless MC8755 */ { USB_DEVICE(0x1199, 0x6803) }, /* Sierra Wireless MC8765 */ + { USB_DEVICE(0x1199, 0x6804) }, /* Sierra Wireless MC8755 */ + { USB_DEVICE(0x1199, 0x6805) }, /* Sierra Wireless MC8765 */ + { USB_DEVICE(0x1199, 0x6808) }, /* Sierra Wireless MC8755 */ + { USB_DEVICE(0x1199, 0x6809) }, /* Sierra Wireless MC8765 */ { USB_DEVICE(0x1199, 0x6812) }, /* Sierra Wireless MC8775 & AC 875U */ - { USB_DEVICE(0x1199, 0x6813) }, /* Sierra Wireless MC8775 (Lenovo) */ + { USB_DEVICE(0x1199, 0x6813) }, /* Sierra Wireless MC8775 */ { USB_DEVICE(0x1199, 0x6815) }, /* Sierra Wireless MC8775 */ - { USB_DEVICE(0x03f0, 0x1e1d) }, /* HP hs2300 a.k.a MC8775 */ + { USB_DEVICE(0x1199, 0x6816) }, /* Sierra Wireless MC8775 */ { USB_DEVICE(0x1199, 0x6820) }, /* Sierra Wireless AirCard 875 */ { USB_DEVICE(0x1199, 0x6821) }, /* Sierra Wireless AirCard 875U */ + { USB_DEVICE(0x1199, 0x6822) }, /* Sierra Wireless AirCard 875E */ { USB_DEVICE(0x1199, 0x6832) }, /* Sierra Wireless MC8780 */ { USB_DEVICE(0x1199, 0x6833) }, /* Sierra Wireless MC8781 */ + { USB_DEVICE(0x1199, 0x6834) }, /* Sierra Wireless MC8780 */ + { USB_DEVICE(0x1199, 0x6835) }, /* Sierra Wireless MC8781 */ + { USB_DEVICE(0x1199, 0x6838) }, /* Sierra Wireless MC8780 */ + { USB_DEVICE(0x1199, 0x6839) }, /* Sierra Wireless MC8781 */ { USB_DEVICE(0x1199, 0x683A) }, /* Sierra Wireless MC8785 */ { USB_DEVICE(0x1199, 0x683B) }, /* Sierra Wireless MC8785 Composite */ /* Sierra Wireless MC8790, MC8791, MC8792 Composite */ @@ -227,16 +242,13 @@ static struct usb_device_id id_table [] = { { USB_DEVICE(0x1199, 0x685A) }, /* Sierra Wireless AirCard 885 E */ /* Sierra Wireless C885 */ { USB_DEVICE_AND_INTERFACE_INFO(0x1199, 0x6880, 0xFF, 0xFF, 0xFF)}, - /* Sierra Wireless Device */ + /* Sierra Wireless C888, Air Card 501, USB 303, USB 304 */ { USB_DEVICE_AND_INTERFACE_INFO(0x1199, 0x6890, 0xFF, 0xFF, 0xFF)}, - /* Sierra Wireless Device */ + /* Sierra Wireless C22/C33 */ { USB_DEVICE_AND_INTERFACE_INFO(0x1199, 0x6891, 0xFF, 0xFF, 0xFF)}, - /* Sierra Wireless Device */ + /* Sierra Wireless HSPA Non-Composite Device */ { USB_DEVICE_AND_INTERFACE_INFO(0x1199, 0x6892, 0xFF, 0xFF, 0xFF)}, - - { USB_DEVICE(0x1199, 0x0112) }, /* Sierra Wireless AirCard 580 */ - { USB_DEVICE(0x0F3D, 0x0112) }, /* Airprime/Sierra PC 5220 */ - + { USB_DEVICE(0x1199, 0x6893) }, /* Sierra Wireless Device */ { USB_DEVICE(0x1199, 0x68A3), /* Sierra Wireless Direct IP modems */ .driver_info = (kernel_ulong_t)&direct_ip_interface_blacklist }, -- cgit v1.2.3 From 0cce2eda19923e5e5ccc8b042dec5af87b3ffad0 Mon Sep 17 00:00:00 2001 From: Daniel Mack Date: Fri, 10 Jul 2009 11:04:58 +0200 Subject: USB: fix LANGID=0 regression commit b7af0bb ("USB: allow malformed LANGID descriptors") broke support for devices without string descriptor support. Reporting string descriptors is optional to USB devices, and a device lets us know it can't deal with strings by responding to the LANGID request with a STALL token. The kernel handled that correctly before b7af0bb came in, but failed hard if the LANGID was reported but broken. More than that, if a device was not able to provide string descriptors, the LANGID was retrieved over and over again at each string read request. This patch changes the behaviour so that a) the LANGID is only queried once b) devices which can't handle string requests are not asked again c) devices with malformed LANGID values have a sane fallback to 0x0409 Signed-off-by: Daniel Mack Acked-by: Alan Stern Cc: stable Signed-off-by: Greg Kroah-Hartman --- drivers/usb/core/message.c | 63 +++++++++++++++++++++++++++++++++------------- 1 file changed, 45 insertions(+), 18 deletions(-) diff --git a/drivers/usb/core/message.c b/drivers/usb/core/message.c index 2bed83caacb..9720e699f47 100644 --- a/drivers/usb/core/message.c +++ b/drivers/usb/core/message.c @@ -806,6 +806,48 @@ static int usb_string_sub(struct usb_device *dev, unsigned int langid, return rc; } +static int usb_get_langid(struct usb_device *dev, unsigned char *tbuf) +{ + int err; + + if (dev->have_langid) + return 0; + + if (dev->string_langid < 0) + return -EPIPE; + + err = usb_string_sub(dev, 0, 0, tbuf); + + /* If the string was reported but is malformed, default to english + * (0x0409) */ + if (err == -ENODATA || (err > 0 && err < 4)) { + dev->string_langid = 0x0409; + dev->have_langid = 1; + dev_err(&dev->dev, + "string descriptor 0 malformed (err = %d), " + "defaulting to 0x%04x\n", + err, dev->string_langid); + return 0; + } + + /* In case of all other errors, we assume the device is not able to + * deal with strings at all. Set string_langid to -1 in order to + * prevent any string to be retrieved from the device */ + if (err < 0) { + dev_err(&dev->dev, "string descriptor 0 read error: %d\n", + err); + dev->string_langid = -1; + return -EPIPE; + } + + /* always use the first langid listed */ + dev->string_langid = tbuf[2] | (tbuf[3] << 8); + dev->have_langid = 1; + dev_dbg(&dev->dev, "default language 0x%04x\n", + dev->string_langid); + return 0; +} + /** * usb_string - returns UTF-8 version of a string descriptor * @dev: the device whose string descriptor is being retrieved @@ -837,24 +879,9 @@ int usb_string(struct usb_device *dev, int index, char *buf, size_t size) if (!tbuf) return -ENOMEM; - /* get langid for strings if it's not yet known */ - if (!dev->have_langid) { - err = usb_string_sub(dev, 0, 0, tbuf); - if (err < 0) { - dev_err(&dev->dev, - "string descriptor 0 read error: %d\n", - err); - } else if (err < 4) { - dev_err(&dev->dev, "string descriptor 0 too short\n"); - } else { - dev->string_langid = tbuf[2] | (tbuf[3] << 8); - /* always use the first langid listed */ - dev_dbg(&dev->dev, "default language 0x%04x\n", - dev->string_langid); - } - - dev->have_langid = 1; - } + err = usb_get_langid(dev, tbuf); + if (err < 0) + goto errout; err = usb_string_sub(dev, dev->string_langid, index, tbuf); if (err < 0) -- cgit v1.2.3 From 1fe975f9302e6c5a8f66401e305685396b2e4577 Mon Sep 17 00:00:00 2001 From: Sergei Shtylyov Date: Fri, 10 Jul 2009 20:02:44 +0300 Subject: USB: musb_host: undo incorrect change in musb_advance_schedule() Commit c9cd06b3d6ea825c62e277def929cc4315802b48 (musb_host: refactor URB giveback) included due to my overlook the change incorrect in the context of the current kernel -- undo it. Signed-off-by: Sergei Shtylyov Acked-by: David Brownell Signed-off-by: Greg Kroah-Hartman --- drivers/usb/musb/musb_host.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/usb/musb/musb_host.c b/drivers/usb/musb/musb_host.c index d6ed560e882..cf94511485f 100644 --- a/drivers/usb/musb/musb_host.c +++ b/drivers/usb/musb/musb_host.c @@ -373,7 +373,7 @@ static void musb_advance_schedule(struct musb *musb, struct urb *urb, musb_save_toggle(qh, is_in, urb); break; case USB_ENDPOINT_XFER_ISOC: - if (urb->error_count) + if (status == 0 && urb->error_count) status = -EXDEV; break; } -- cgit v1.2.3 From 4d2fae8b3597bc787f1f1c06637ce5ab8187e5a7 Mon Sep 17 00:00:00 2001 From: Alan Stern Date: Thu, 9 Jul 2009 12:59:57 -0400 Subject: USB: cypress_m8: remove invalid Clear-Halt This patch (as1265) removes an erroneous call to usb_clear_halt from the cypress_m8 driver. The call isn't valid because it is made from interrupt context whereas usb_clear_halt is a blocking routine. Presumably the code has never been executed; if it did it would cause an oops. So instead treat -EPIPE like any other sort of unexplained error. Signed-off-by: Alan Stern Signed-off-by: Greg Kroah-Hartman --- drivers/usb/serial/cypress_m8.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/usb/serial/cypress_m8.c b/drivers/usb/serial/cypress_m8.c index 9734085fd2f..59adfe12311 100644 --- a/drivers/usb/serial/cypress_m8.c +++ b/drivers/usb/serial/cypress_m8.c @@ -1228,8 +1228,8 @@ static void cypress_read_int_callback(struct urb *urb) /* precursor to disconnect so just go away */ return; case -EPIPE: - usb_clear_halt(port->serial->dev, 0x81); - break; + /* Can't call usb_clear_halt while in_interrupt */ + /* FALLS THROUGH */ default: /* something ugly is going on... */ dev_err(&urb->dev->dev, -- cgit v1.2.3 From f092c240494f2d807401d93f95f683909b90af96 Mon Sep 17 00:00:00 2001 From: Alan Stern Date: Thu, 9 Jul 2009 12:58:43 -0400 Subject: USB: option: remove unnecessary and erroneous code This patch (as1264) removes a bunch of unnecessary and erroneous stuff from the option USB-serial driver. Clearly there's no need to verify that the device pointer stored in the URBs is right or to store the same pointer over again. After all, the pointer can't change once it has been set up. There's also no need to call usb_clear_halt for the IN endpoint multiple times -- in fact, doing so is an error since every time after the first there will be active URBs queued for that endpoint. Since the Clear-Halts don't appear to be needed at all, the patch simply removes them. Signed-off-by: Alan Stern Signed-off-by: Greg Kroah-Hartman --- drivers/usb/serial/option.c | 27 +-------------------------- 1 file changed, 1 insertion(+), 26 deletions(-) diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c index 4526064752f..98262dd552b 100644 --- a/drivers/usb/serial/option.c +++ b/drivers/usb/serial/option.c @@ -748,7 +748,6 @@ static int option_write(struct tty_struct *tty, struct usb_serial_port *port, memcpy(this_urb->transfer_buffer, buf, todo); this_urb->transfer_buffer_length = todo; - this_urb->dev = port->serial->dev; err = usb_submit_urb(this_urb, GFP_ATOMIC); if (err) { dbg("usb_submit_urb %p (write bulk) failed " @@ -876,7 +875,6 @@ static void option_instat_callback(struct urb *urb) /* Resubmit urb so we continue receiving IRQ data */ if (status != -ESHUTDOWN && status != -ENOENT) { - urb->dev = serial->dev; err = usb_submit_urb(urb, GFP_ATOMIC); if (err) dbg("%s: resubmit intr urb failed. (%d)", @@ -937,23 +935,11 @@ static int option_open(struct tty_struct *tty, dbg("%s", __func__); - /* Reset low level data toggle and start reading from endpoints */ + /* Start reading from the IN endpoint */ for (i = 0; i < N_IN_URB; i++) { urb = portdata->in_urbs[i]; if (!urb) continue; - if (urb->dev != serial->dev) { - dbg("%s: dev %p != %p", __func__, - urb->dev, serial->dev); - continue; - } - - /* - * make sure endpoint data toggle is synchronized with the - * device - */ - usb_clear_halt(urb->dev, urb->pipe); - err = usb_submit_urb(urb, GFP_KERNEL); if (err) { dbg("%s: submit urb %d failed (%d) %d", @@ -962,16 +948,6 @@ static int option_open(struct tty_struct *tty, } } - /* Reset low level data toggle on out endpoints */ - for (i = 0; i < N_OUT_URB; i++) { - urb = portdata->out_urbs[i]; - if (!urb) - continue; - urb->dev = serial->dev; - /* usb_settoggle(urb->dev, usb_pipeendpoint(urb->pipe), - usb_pipeout(urb->pipe), 0); */ - } - option_send_setup(port); return 0; @@ -1234,7 +1210,6 @@ static int option_resume(struct usb_serial *serial) dbg("%s: No interrupt URB for port %d\n", __func__, i); continue; } - port->interrupt_in_urb->dev = serial->dev; err = usb_submit_urb(port->interrupt_in_urb, GFP_NOIO); dbg("Submitted interrupt URB for port %d (result %d)", i, err); if (err < 0) { -- cgit v1.2.3 From ec6d67e39f5638c792eb7490bf32586ccb9d8005 Mon Sep 17 00:00:00 2001 From: Alan Stern Date: Mon, 29 Jun 2009 14:34:59 -0400 Subject: USB: EHCI: report actual_length for iso transfers This patch (as1259b) makes ehci-hcd return the total number of bytes transferred in urb->actual_length for Isochronous transfers. Until now, the actual_length value was unaccountably left at 0. Signed-off-by: Alan Stern Acked-by: David Brownell Cc: stable Signed-off-by: Greg Kroah-Hartman --- drivers/usb/host/ehci-sched.c | 12 ++++++++---- 1 file changed, 8 insertions(+), 4 deletions(-) diff --git a/drivers/usb/host/ehci-sched.c b/drivers/usb/host/ehci-sched.c index 9d1babc7ff6..74f7f83b29a 100644 --- a/drivers/usb/host/ehci-sched.c +++ b/drivers/usb/host/ehci-sched.c @@ -1619,11 +1619,14 @@ itd_complete ( desc->status = -EPROTO; /* HC need not update length with this error */ - if (!(t & EHCI_ISOC_BABBLE)) - desc->actual_length = EHCI_ITD_LENGTH (t); + if (!(t & EHCI_ISOC_BABBLE)) { + desc->actual_length = EHCI_ITD_LENGTH(t); + urb->actual_length += desc->actual_length; + } } else if (likely ((t & EHCI_ISOC_ACTIVE) == 0)) { desc->status = 0; - desc->actual_length = EHCI_ITD_LENGTH (t); + desc->actual_length = EHCI_ITD_LENGTH(t); + urb->actual_length += desc->actual_length; } else { /* URB was too late */ desc->status = -EXDEV; @@ -2014,7 +2017,8 @@ sitd_complete ( desc->status = -EPROTO; } else { desc->status = 0; - desc->actual_length = desc->length - SITD_LENGTH (t); + desc->actual_length = desc->length - SITD_LENGTH(t); + urb->actual_length += desc->actual_length; } stream->depth -= stream->interval << 3; -- cgit v1.2.3 From 9180135bc80ab11199d482b6111e23f74d65af4a Mon Sep 17 00:00:00 2001 From: Alan Stern Date: Mon, 29 Jun 2009 11:04:54 -0400 Subject: USB: handle zero-length usbfs submissions correctly This patch (as1262) fixes a bug in usbfs: It refuses to accept zero-length transfers, and it insists that the buffer pointer be valid even if there is no data being transferred. The patch also consolidates a bunch of repetitive access_ok() checks into a single check, which incidentally fixes the lack of such a check for Isochronous URBs. Signed-off-by: Alan Stern Cc: stable Signed-off-by: Greg Kroah-Hartman --- drivers/usb/core/devio.c | 41 ++++++++++++++++++++--------------------- 1 file changed, 20 insertions(+), 21 deletions(-) diff --git a/drivers/usb/core/devio.c b/drivers/usb/core/devio.c index 46ca2af5ef1..38b8bce782d 100644 --- a/drivers/usb/core/devio.c +++ b/drivers/usb/core/devio.c @@ -995,7 +995,7 @@ static int proc_do_submiturb(struct dev_state *ps, struct usbdevfs_urb *uurb, USBDEVFS_URB_ZERO_PACKET | USBDEVFS_URB_NO_INTERRUPT)) return -EINVAL; - if (!uurb->buffer) + if (uurb->buffer_length > 0 && !uurb->buffer) return -EINVAL; if (!(uurb->type == USBDEVFS_URB_TYPE_CONTROL && (uurb->endpoint & ~USB_ENDPOINT_DIR_MASK) == 0)) { @@ -1051,11 +1051,6 @@ static int proc_do_submiturb(struct dev_state *ps, struct usbdevfs_urb *uurb, is_in = 0; uurb->endpoint &= ~USB_DIR_IN; } - if (!access_ok(is_in ? VERIFY_WRITE : VERIFY_READ, - uurb->buffer, uurb->buffer_length)) { - kfree(dr); - return -EFAULT; - } snoop(&ps->dev->dev, "control urb: bRequest=%02x " "bRrequestType=%02x wValue=%04x " "wIndex=%04x wLength=%04x\n", @@ -1075,9 +1070,6 @@ static int proc_do_submiturb(struct dev_state *ps, struct usbdevfs_urb *uurb, uurb->number_of_packets = 0; if (uurb->buffer_length > MAX_USBFS_BUFFER_SIZE) return -EINVAL; - if (!access_ok(is_in ? VERIFY_WRITE : VERIFY_READ, - uurb->buffer, uurb->buffer_length)) - return -EFAULT; snoop(&ps->dev->dev, "bulk urb\n"); break; @@ -1119,28 +1111,35 @@ static int proc_do_submiturb(struct dev_state *ps, struct usbdevfs_urb *uurb, return -EINVAL; if (uurb->buffer_length > MAX_USBFS_BUFFER_SIZE) return -EINVAL; - if (!access_ok(is_in ? VERIFY_WRITE : VERIFY_READ, - uurb->buffer, uurb->buffer_length)) - return -EFAULT; snoop(&ps->dev->dev, "interrupt urb\n"); break; default: return -EINVAL; } - as = alloc_async(uurb->number_of_packets); - if (!as) { + if (uurb->buffer_length > 0 && + !access_ok(is_in ? VERIFY_WRITE : VERIFY_READ, + uurb->buffer, uurb->buffer_length)) { kfree(isopkt); kfree(dr); - return -ENOMEM; + return -EFAULT; } - as->urb->transfer_buffer = kmalloc(uurb->buffer_length, GFP_KERNEL); - if (!as->urb->transfer_buffer) { + as = alloc_async(uurb->number_of_packets); + if (!as) { kfree(isopkt); kfree(dr); - free_async(as); return -ENOMEM; } + if (uurb->buffer_length > 0) { + as->urb->transfer_buffer = kmalloc(uurb->buffer_length, + GFP_KERNEL); + if (!as->urb->transfer_buffer) { + kfree(isopkt); + kfree(dr); + free_async(as); + return -ENOMEM; + } + } as->urb->dev = ps->dev; as->urb->pipe = (uurb->type << 30) | __create_pipe(ps->dev, uurb->endpoint & 0xf) | @@ -1182,7 +1181,7 @@ static int proc_do_submiturb(struct dev_state *ps, struct usbdevfs_urb *uurb, kfree(isopkt); as->ps = ps; as->userurb = arg; - if (uurb->endpoint & USB_DIR_IN) + if (is_in && uurb->buffer_length > 0) as->userbuffer = uurb->buffer; else as->userbuffer = NULL; @@ -1192,9 +1191,9 @@ static int proc_do_submiturb(struct dev_state *ps, struct usbdevfs_urb *uurb, as->uid = cred->uid; as->euid = cred->euid; security_task_getsecid(current, &as->secid); - if (!is_in) { + if (!is_in && uurb->buffer_length > 0) { if (copy_from_user(as->urb->transfer_buffer, uurb->buffer, - as->urb->transfer_buffer_length)) { + uurb->buffer_length)) { free_async(as); return -EFAULT; } -- cgit v1.2.3 From dc7520c17982ca4232233d2781e5cde29e58fbad Mon Sep 17 00:00:00 2001 From: Ajay Kumar Gupta Date: Fri, 3 Jul 2009 13:18:45 +0530 Subject: USB: otg: fix module reinsert issue Platform_device instance (pd) is not set to NULL in usb_nop_xceiv_unregister() causing usb_nop_xceiv_register() to fail during module reinsert. From: Ajay Kumar Gupta Signed-off-by: Babu Ravi Acked-by: David Brownell --- drivers/usb/otg/nop-usb-xceiv.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/usb/otg/nop-usb-xceiv.c b/drivers/usb/otg/nop-usb-xceiv.c index 9ed5ea56867..af456b48985 100644 --- a/drivers/usb/otg/nop-usb-xceiv.c +++ b/drivers/usb/otg/nop-usb-xceiv.c @@ -53,6 +53,7 @@ EXPORT_SYMBOL(usb_nop_xceiv_register); void usb_nop_xceiv_unregister(void) { platform_device_unregister(pd); + pd = NULL; } EXPORT_SYMBOL(usb_nop_xceiv_unregister); -- cgit v1.2.3 From adeab1afb7de89555c69aab5ca21300c14af6369 Mon Sep 17 00:00:00 2001 From: Ralf Baechle Date: Sun, 12 Jul 2009 21:09:20 -0700 Subject: NET: Fix locking issues in PPP, 6pack, mkiss and strip line disciplines. Guido Trentalancia reports: I am trying to use the kiss driver in the Linux kernel that is being shipped with Fedora 10 but unfortunately I get the following oops: mkiss: AX.25 Multikiss, Hans Albas PE1AYX mkiss: ax0: crc mode is auto. ADDRCONF(NETDEV_CHANGE): ax0: link becomes ready ------------[ cut here ]------------ WARNING: at kernel/softirq.c:77 __local_bh_disable+0x2f/0x83() (Not tainted) [...] unloaded: microcode] Pid: 0, comm: swapper Not tainted 2.6.27.25-170.2.72.fc10.i686 #1 [] warn_on_slowpath+0x65/0x8b [] ? _spin_unlock_irqrestore+0x22/0x38 [] ? __enqueue_entity+0xe3/0xeb [] ? enqueue_entity+0x203/0x20b [] ? enqueue_task_fair+0x3b/0x3f [] ? resched_task+0x3a/0x6e [] ? _spin_unlock_irqrestore+0x22/0x38 [] ? _spin_lock_bh+0xb/0x16 [] __local_bh_disable+0x2f/0x83 [] local_bh_disable+0xb/0xd [] _spin_lock_bh+0xb/0x16 [] mkiss_receive_buf+0x2fb/0x3a6 [mkiss] [] flush_to_ldisc+0xf7/0x198 [] tty_flip_buffer_push+0x41/0x51 [] ftdi_process_read+0x375/0x4ad [ftdi_sio] [] ftdi_read_bulk_callback+0x130/0x138 [ftdi_sio] [] usb_hcd_giveback_urb+0x63/0x93 [] uhci_giveback_urb+0xe5/0x15f [] uhci_scan_schedule+0x52e/0x767 [] ? psmouse_handle_byte+0xc/0xe5 [] ? acpi_ev_gpe_detect+0xd6/0xe1 [] uhci_irq+0x110/0x125 [] usb_hcd_irq+0x40/0xa3 [] handle_IRQ_event+0x2f/0x64 [] handle_level_irq+0x74/0xbe [] ? handle_level_irq+0x0/0xbe [] do_IRQ+0xc7/0xfe [] common_interrupt+0x28/0x30 [] ? acpi_idle_enter_simple+0x162/0x19d [] cpuidle_idle_call+0x60/0x92 [] cpu_idle+0x101/0x134 [] rest_init+0x4e/0x50 ======================= ---[ end trace b7cc8076093467ad ]--- ------------[ cut here ]------------ WARNING: at kernel/softirq.c:136 _local_bh_enable_ip+0x3d/0xc4() [...] Pid: 0, comm: swapper Tainted: G W 2.6.27.25-170.2.72.fc10.i686 [] warn_on_slowpath+0x65/0x8b [] ? _spin_unlock_irqrestore+0x22/0x38 [] ? __enqueue_entity+0xe3/0xeb [] ? enqueue_entity+0x203/0x20b [] ? enqueue_task_fair+0x3b/0x3f [] ? resched_task+0x3a/0x6e [] ? _spin_unlock_irqrestore+0x22/0x38 [] ? _spin_lock_bh+0xb/0x16 [] ? mkiss_receive_buf+0x33d/0x3a6 [mkiss] [] _local_bh_enable_ip+0x3d/0xc4 [] local_bh_enable_ip+0x8/0xa [] _spin_unlock_bh+0x11/0x13 [] mkiss_receive_buf+0x33d/0x3a6 [mkiss] [] flush_to_ldisc+0xf7/0x198 [] tty_flip_buffer_push+0x41/0x51 [] ftdi_process_read+0x375/0x4ad [ftdi_sio] [] ftdi_read_bulk_callback+0x130/0x138 [ftdi_sio] [] usb_hcd_giveback_urb+0x63/0x93 [] uhci_giveback_urb+0xe5/0x15f [] uhci_scan_schedule+0x52e/0x767 [] ? psmouse_handle_byte+0xc/0xe5 [] ? acpi_ev_gpe_detect+0xd6/0xe1 [] uhci_irq+0x110/0x125 [] usb_hcd_irq+0x40/0xa3 [] handle_IRQ_event+0x2f/0x64 [] handle_level_irq+0x74/0xbe [] ? handle_level_irq+0x0/0xbe [] do_IRQ+0xc7/0xfe [] common_interrupt+0x28/0x30 [] ? acpi_idle_enter_simple+0x162/0x19d [] cpuidle_idle_call+0x60/0x92 [] cpu_idle+0x101/0x134 [] rest_init+0x4e/0x50 ======================= ---[ end trace b7cc8076093467ad ]--- mkiss: ax0: Trying crc-smack mkiss: ax0: Trying crc-flexnet The issue was, that the locking code in mkiss was assuming it was only ever being called in process or bh context. Fixed by converting the involved locking code to use irq-safe locks. Review of other networking line disciplines shows that 6pack, both sync and async PPP and STRIP have similar issues. The ppp_async one is the most interesting one as it sorts out half of the issue as far back as 2004 in commit http://git.kernel.org/?p=linux/kernel/git/tglx/history.git;a=commitdiff;h=2996d8deaeddd01820691a872550dc0cfba0c37d Signed-off-by: Ralf Baechle Reported-by: Guido Trentalancia Signed-off-by: David S. Miller --- drivers/net/hamradio/6pack.c | 10 ++++++---- drivers/net/hamradio/mkiss.c | 41 ++++++++++++++++++++++++----------------- drivers/net/ppp_async.c | 11 +++++++---- drivers/net/ppp_synctty.c | 11 +++++++---- drivers/net/wireless/strip.c | 39 ++++++++++++++++++++++++--------------- 5 files changed, 68 insertions(+), 44 deletions(-) diff --git a/drivers/net/hamradio/6pack.c b/drivers/net/hamradio/6pack.c index 155160052c8..913a5640659 100644 --- a/drivers/net/hamradio/6pack.c +++ b/drivers/net/hamradio/6pack.c @@ -398,13 +398,14 @@ static DEFINE_RWLOCK(disc_data_lock); static struct sixpack *sp_get(struct tty_struct *tty) { + unsigned long flags; struct sixpack *sp; - read_lock(&disc_data_lock); + read_lock_irqsave(&disc_data_lock, flags); sp = tty->disc_data; if (sp) atomic_inc(&sp->refcnt); - read_unlock(&disc_data_lock); + read_unlock_irqrestore(&disc_data_lock, flags); return sp; } @@ -688,12 +689,13 @@ out: */ static void sixpack_close(struct tty_struct *tty) { + unsigned long flags; struct sixpack *sp; - write_lock(&disc_data_lock); + write_lock_irqsave(&disc_data_lock, flags); sp = tty->disc_data; tty->disc_data = NULL; - write_unlock(&disc_data_lock); + write_unlock_irqrestore(&disc_data_lock, flags); if (!sp) return; diff --git a/drivers/net/hamradio/mkiss.c b/drivers/net/hamradio/mkiss.c index fda2fc83e9a..a7286500c18 100644 --- a/drivers/net/hamradio/mkiss.c +++ b/drivers/net/hamradio/mkiss.c @@ -244,15 +244,16 @@ static int kiss_esc_crc(unsigned char *s, unsigned char *d, unsigned short crc, /* Send one completely decapsulated AX.25 packet to the AX.25 layer. */ static void ax_bump(struct mkiss *ax) { + unsigned long flags; struct sk_buff *skb; int count; - spin_lock_bh(&ax->buflock); + spin_lock_irqsave(&ax->buflock, flags); if (ax->rbuff[0] > 0x0f) { if (ax->rbuff[0] & 0x80) { if (check_crc_16(ax->rbuff, ax->rcount) < 0) { ax->dev->stats.rx_errors++; - spin_unlock_bh(&ax->buflock); + spin_unlock_irqrestore(&ax->buflock, flags); return; } @@ -267,7 +268,7 @@ static void ax_bump(struct mkiss *ax) } else if (ax->rbuff[0] & 0x20) { if (check_crc_flex(ax->rbuff, ax->rcount) < 0) { ax->dev->stats.rx_errors++; - spin_unlock_bh(&ax->buflock); + spin_unlock_irqrestore(&ax->buflock, flags); return; } if (ax->crcmode != CRC_MODE_FLEX && ax->crcauto) { @@ -294,7 +295,7 @@ static void ax_bump(struct mkiss *ax) printk(KERN_ERR "mkiss: %s: memory squeeze, dropping packet.\n", ax->dev->name); ax->dev->stats.rx_dropped++; - spin_unlock_bh(&ax->buflock); + spin_unlock_irqrestore(&ax->buflock, flags); return; } @@ -303,11 +304,13 @@ static void ax_bump(struct mkiss *ax) netif_rx(skb); ax->dev->stats.rx_packets++; ax->dev->stats.rx_bytes += count; - spin_unlock_bh(&ax->buflock); + spin_unlock_irqrestore(&ax->buflock, flags); } static void kiss_unesc(struct mkiss *ax, unsigned char s) { + unsigned long flags; + switch (s) { case END: /* drop keeptest bit = VSV */ @@ -334,18 +337,18 @@ static void kiss_unesc(struct mkiss *ax, unsigned char s) break; } - spin_lock_bh(&ax->buflock); + spin_lock_irqsave(&ax->buflock, flags); if (!test_bit(AXF_ERROR, &ax->flags)) { if (ax->rcount < ax->buffsize) { ax->rbuff[ax->rcount++] = s; - spin_unlock_bh(&ax->buflock); + spin_unlock_irqrestore(&ax->buflock, flags); return; } ax->dev->stats.rx_over_errors++; set_bit(AXF_ERROR, &ax->flags); } - spin_unlock_bh(&ax->buflock); + spin_unlock_irqrestore(&ax->buflock, flags); } static int ax_set_mac_address(struct net_device *dev, void *addr) @@ -367,6 +370,7 @@ static void ax_changedmtu(struct mkiss *ax) { struct net_device *dev = ax->dev; unsigned char *xbuff, *rbuff, *oxbuff, *orbuff; + unsigned long flags; int len; len = dev->mtu * 2; @@ -392,7 +396,7 @@ static void ax_changedmtu(struct mkiss *ax) return; } - spin_lock_bh(&ax->buflock); + spin_lock_irqsave(&ax->buflock, flags); oxbuff = ax->xbuff; ax->xbuff = xbuff; @@ -423,7 +427,7 @@ static void ax_changedmtu(struct mkiss *ax) ax->mtu = dev->mtu + 73; ax->buffsize = len; - spin_unlock_bh(&ax->buflock); + spin_unlock_irqrestore(&ax->buflock, flags); kfree(oxbuff); kfree(orbuff); @@ -433,6 +437,7 @@ static void ax_changedmtu(struct mkiss *ax) static void ax_encaps(struct net_device *dev, unsigned char *icp, int len) { struct mkiss *ax = netdev_priv(dev); + unsigned long flags; unsigned char *p; int actual, count; @@ -449,7 +454,7 @@ static void ax_encaps(struct net_device *dev, unsigned char *icp, int len) p = icp; - spin_lock_bh(&ax->buflock); + spin_lock_irqsave(&ax->buflock, flags); if ((*p & 0x0f) != 0) { /* Configuration Command (kissparms(1). * Protocol spec says: never append CRC. @@ -479,7 +484,7 @@ static void ax_encaps(struct net_device *dev, unsigned char *icp, int len) ax->crcauto = (cmd ? 0 : 1); printk(KERN_INFO "mkiss: %s: crc mode %s %d\n", ax->dev->name, (len) ? "set to" : "is", cmd); } - spin_unlock_bh(&ax->buflock); + spin_unlock_irqrestore(&ax->buflock, flags); netif_start_queue(dev); return; @@ -512,7 +517,7 @@ static void ax_encaps(struct net_device *dev, unsigned char *icp, int len) count = kiss_esc(p, (unsigned char *)ax->xbuff, len); } } - spin_unlock_bh(&ax->buflock); + spin_unlock_irqrestore(&ax->buflock, flags); set_bit(TTY_DO_WRITE_WAKEUP, &ax->tty->flags); actual = ax->tty->ops->write(ax->tty, ax->xbuff, count); @@ -704,13 +709,14 @@ static DEFINE_RWLOCK(disc_data_lock); static struct mkiss *mkiss_get(struct tty_struct *tty) { + unsigned long flags; struct mkiss *ax; - read_lock(&disc_data_lock); + read_lock_irqsave(&disc_data_lock, flags); ax = tty->disc_data; if (ax) atomic_inc(&ax->refcnt); - read_unlock(&disc_data_lock); + read_unlock_irqrestore(&disc_data_lock, flags); return ax; } @@ -809,12 +815,13 @@ out: static void mkiss_close(struct tty_struct *tty) { + unsigned long flags; struct mkiss *ax; - write_lock(&disc_data_lock); + write_lock_irqsave(&disc_data_lock, flags); ax = tty->disc_data; tty->disc_data = NULL; - write_unlock(&disc_data_lock); + write_unlock_irqrestore(&disc_data_lock, flags); if (!ax) return; diff --git a/drivers/net/ppp_async.c b/drivers/net/ppp_async.c index 17c116bb332..1fd319bf758 100644 --- a/drivers/net/ppp_async.c +++ b/drivers/net/ppp_async.c @@ -132,13 +132,15 @@ static DEFINE_RWLOCK(disc_data_lock); static struct asyncppp *ap_get(struct tty_struct *tty) { + unsigned long flags; struct asyncppp *ap; - read_lock(&disc_data_lock); + read_lock_irqsave(&disc_data_lock, flags); ap = tty->disc_data; if (ap != NULL) atomic_inc(&ap->refcnt); - read_unlock(&disc_data_lock); + read_unlock_irqrestore(&disc_data_lock, flags); + return ap; } @@ -215,12 +217,13 @@ ppp_asynctty_open(struct tty_struct *tty) static void ppp_asynctty_close(struct tty_struct *tty) { + unsigned long flags; struct asyncppp *ap; - write_lock_irq(&disc_data_lock); + write_lock_irqsave(&disc_data_lock, flags); ap = tty->disc_data; tty->disc_data = NULL; - write_unlock_irq(&disc_data_lock); + write_unlock_irqrestore(&disc_data_lock, flags); if (!ap) return; diff --git a/drivers/net/ppp_synctty.c b/drivers/net/ppp_synctty.c index aa3d39f38e2..1b3f75febee 100644 --- a/drivers/net/ppp_synctty.c +++ b/drivers/net/ppp_synctty.c @@ -182,13 +182,15 @@ static DEFINE_RWLOCK(disc_data_lock); static struct syncppp *sp_get(struct tty_struct *tty) { + unsigned long flags; struct syncppp *ap; - read_lock(&disc_data_lock); + read_lock_irqsave(&disc_data_lock, flags); ap = tty->disc_data; if (ap != NULL) atomic_inc(&ap->refcnt); - read_unlock(&disc_data_lock); + read_unlock_irqrestore(&disc_data_lock, flags); + return ap; } @@ -262,12 +264,13 @@ ppp_sync_open(struct tty_struct *tty) static void ppp_sync_close(struct tty_struct *tty) { + unsigned long flags; struct syncppp *ap; - write_lock_irq(&disc_data_lock); + write_lock_irqsave(&disc_data_lock, flags); ap = tty->disc_data; tty->disc_data = NULL; - write_unlock_irq(&disc_data_lock); + write_unlock_irqrestore(&disc_data_lock, flags); if (!ap) return; diff --git a/drivers/net/wireless/strip.c b/drivers/net/wireless/strip.c index 38366a56b71..3d39f6587eb 100644 --- a/drivers/net/wireless/strip.c +++ b/drivers/net/wireless/strip.c @@ -856,6 +856,7 @@ static int strip_change_mtu(struct net_device *dev, int new_mtu) unsigned char *orbuff = strip_info->rx_buff; unsigned char *osbuff = strip_info->sx_buff; unsigned char *otbuff = strip_info->tx_buff; + unsigned long flags; if (new_mtu > MAX_SEND_MTU) { printk(KERN_ERR @@ -864,11 +865,11 @@ static int strip_change_mtu(struct net_device *dev, int new_mtu) return -EINVAL; } - spin_lock_bh(&strip_lock); + spin_lock_irqsave(&strip_lock, flags); if (!allocate_buffers(strip_info, new_mtu)) { printk(KERN_ERR "%s: unable to grow strip buffers, MTU change cancelled.\n", strip_info->dev->name); - spin_unlock_bh(&strip_lock); + spin_unlock_irqrestore(&strip_lock, flags); return -ENOMEM; } @@ -892,7 +893,7 @@ static int strip_change_mtu(struct net_device *dev, int new_mtu) } } strip_info->tx_head = strip_info->tx_buff; - spin_unlock_bh(&strip_lock); + spin_unlock_irqrestore(&strip_lock, flags); printk(KERN_NOTICE "%s: strip MTU changed fom %d to %d.\n", strip_info->dev->name, old_mtu, strip_info->mtu); @@ -983,10 +984,13 @@ static void strip_seq_neighbours(struct seq_file *seq, const MetricomNodeTable * table, const char *title) { - /* We wrap this in a do/while loop, so if the table changes */ - /* while we're reading it, we just go around and try again. */ + unsigned long flags; struct timeval t; + /* + * We wrap this in a do/while loop, so if the table changes + * while we're reading it, we just go around and try again. + */ do { int i; t = table->timestamp; @@ -995,9 +999,9 @@ static void strip_seq_neighbours(struct seq_file *seq, for (i = 0; i < table->num_nodes; i++) { MetricomNode node; - spin_lock_bh(&strip_lock); + spin_lock_irqsave(&strip_lock, flags); node = table->node[i]; - spin_unlock_bh(&strip_lock); + spin_unlock_irqrestore(&strip_lock, flags); seq_printf(seq, " %s\n", node.c); } } while (table->timestamp.tv_sec != t.tv_sec @@ -1536,6 +1540,7 @@ static void strip_send(struct strip *strip_info, struct sk_buff *skb) static int strip_xmit(struct sk_buff *skb, struct net_device *dev) { struct strip *strip_info = netdev_priv(dev); + unsigned long flags; if (!netif_running(dev)) { printk(KERN_ERR "%s: xmit call when iface is down\n", @@ -1574,11 +1579,11 @@ static int strip_xmit(struct sk_buff *skb, struct net_device *dev) strip_info->dev->name, sx_pps_count / 8); } - spin_lock_bh(&strip_lock); + spin_lock_irqsave(&strip_lock, flags); strip_send(strip_info, skb); - spin_unlock_bh(&strip_lock); + spin_unlock_irqrestore(&strip_lock, flags); if (skb) dev_kfree_skb(skb); @@ -2263,12 +2268,13 @@ static void strip_receive_buf(struct tty_struct *tty, const unsigned char *cp, { struct strip *strip_info = tty->disc_data; const unsigned char *end = cp + count; + unsigned long flags; if (!strip_info || strip_info->magic != STRIP_MAGIC || !netif_running(strip_info->dev)) return; - spin_lock_bh(&strip_lock); + spin_lock_irqsave(&strip_lock, flags); #if 0 { struct timeval tv; @@ -2335,7 +2341,7 @@ static void strip_receive_buf(struct tty_struct *tty, const unsigned char *cp, } cp++; } - spin_unlock_bh(&strip_lock); + spin_unlock_irqrestore(&strip_lock, flags); } @@ -2523,9 +2529,11 @@ static void strip_dev_setup(struct net_device *dev) static void strip_free(struct strip *strip_info) { - spin_lock_bh(&strip_lock); + unsigned long flags; + + spin_lock_irqsave(&strip_lock, flags); list_del_rcu(&strip_info->list); - spin_unlock_bh(&strip_lock); + spin_unlock_irqrestore(&strip_lock, flags); strip_info->magic = 0; @@ -2539,6 +2547,7 @@ static void strip_free(struct strip *strip_info) static struct strip *strip_alloc(void) { struct list_head *n; + unsigned long flags; struct net_device *dev; struct strip *strip_info; @@ -2562,7 +2571,7 @@ static struct strip *strip_alloc(void) strip_info->idle_timer.function = strip_IdleTask; - spin_lock_bh(&strip_lock); + spin_lock_irqsave(&strip_lock, flags); rescan: /* * Search the list to find where to put our new entry @@ -2581,7 +2590,7 @@ static struct strip *strip_alloc(void) sprintf(dev->name, "st%ld", dev->base_addr); list_add_tail_rcu(&strip_info->list, &strip_list); - spin_unlock_bh(&strip_lock); + spin_unlock_irqrestore(&strip_lock, flags); return strip_info; } -- cgit v1.2.3 From e705cee427e319665969ef7ac664f3612dec8899 Mon Sep 17 00:00:00 2001 From: Giuseppe Mazzotta Date: Sun, 12 Jul 2009 21:02:27 -0700 Subject: Input: wistron_btns - recognize Maxdata Pro 7000 notebooks This patch adds DMI information to automatically load the correct layout for the Maxdata Pro 7000X/DX notebook models. Such notebooks are clones of Fujitsu Amilo V2000, the hook for the v2000 is being used and I have tested that perfectly works. The immediate result of integrating this patch is that the five special buttons will work on these specific notebook models and that the RF killswitch will not be activated after suspend. This patch definitively obsoletes the fsam7400 module which I was still needing to enable wifi and to fix the RF killswitch suspend problem; in the current 2.6.30 kernel it is necessary to load the wistron_btns module with options 'force=1 keymap=1557/MS2141', which was not anyway a complete workaround. Signed-off-by: Giuseppe Mazzotta Signed-off-by: Dmitry Torokhov --- drivers/input/misc/wistron_btns.c | 9 +++++++++ 1 file changed, 9 insertions(+) diff --git a/drivers/input/misc/wistron_btns.c b/drivers/input/misc/wistron_btns.c index 7c8957dd22c..26e17a9a22e 100644 --- a/drivers/input/misc/wistron_btns.c +++ b/drivers/input/misc/wistron_btns.c @@ -644,6 +644,15 @@ static struct dmi_system_id dmi_ids[] __initdata = { }, .driver_data = keymap_fs_amilo_pro_v2000 }, + { + .callback = dmi_matched, + .ident = "Maxdata Pro 7000 DX", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "MAXDATA"), + DMI_MATCH(DMI_PRODUCT_NAME, "Pro 7000"), + }, + .driver_data = keymap_fs_amilo_pro_v2000 + }, { .callback = dmi_matched, .ident = "Fujitsu N3510", -- cgit v1.2.3 From 70a6f2e6d6b8653d394b63210ec57b4c78f3dcd8 Mon Sep 17 00:00:00 2001 From: Michael Gruber Date: Sun, 12 Jul 2009 20:51:36 -0700 Subject: Input: xpad - don't resend successfully sent outgoing requests This avoids an infinite loop. Signed-off-by: Michael Gruber Signed-off-by: Dmitry Torokhov --- drivers/input/joystick/xpad.c | 26 +++++++++++++------------- 1 file changed, 13 insertions(+), 13 deletions(-) diff --git a/drivers/input/joystick/xpad.c b/drivers/input/joystick/xpad.c index b868b8d5fbb..f155ad8cdae 100644 --- a/drivers/input/joystick/xpad.c +++ b/drivers/input/joystick/xpad.c @@ -470,20 +470,20 @@ static void xpad_irq_out(struct urb *urb) status = urb->status; switch (status) { - case 0: + case 0: /* success */ - break; - case -ECONNRESET: - case -ENOENT: - case -ESHUTDOWN: - /* this urb is terminated, clean up */ - dbg("%s - urb shutting down with status: %d", - __func__, status); - return; - default: - dbg("%s - nonzero urb status received: %d", - __func__, status); - goto exit; + return; + + case -ECONNRESET: + case -ENOENT: + case -ESHUTDOWN: + /* this urb is terminated, clean up */ + dbg("%s - urb shutting down with status: %d", __func__, status); + return; + + default: + dbg("%s - nonzero urb status received: %d", __func__, status); + goto exit; } exit: -- cgit v1.2.3 From 35db715bfd3805b04aa233b9933b9facfa9a3290 Mon Sep 17 00:00:00 2001 From: Frans Pop Date: Sun, 12 Jul 2009 20:51:32 -0700 Subject: Input: pcspkr - switch driver to dev_pm_ops Gets rid of the following warning: Platform driver 'pcspkr' needs updating - please use dev_pm_ops Signed-off-by: Frans Pop Signed-off-by: Dmitry Torokhov --- drivers/input/misc/pcspkr.c | 8 ++++++-- 1 file changed, 6 insertions(+), 2 deletions(-) diff --git a/drivers/input/misc/pcspkr.c b/drivers/input/misc/pcspkr.c index d6a30cee7bc..663bbc7ae2f 100644 --- a/drivers/input/misc/pcspkr.c +++ b/drivers/input/misc/pcspkr.c @@ -113,7 +113,7 @@ static int __devexit pcspkr_remove(struct platform_device *dev) return 0; } -static int pcspkr_suspend(struct platform_device *dev, pm_message_t state) +static int pcspkr_suspend(struct device *dev) { pcspkr_event(NULL, EV_SND, SND_BELL, 0); @@ -126,14 +126,18 @@ static void pcspkr_shutdown(struct platform_device *dev) pcspkr_event(NULL, EV_SND, SND_BELL, 0); } +static struct dev_pm_ops pcspkr_pm_ops = { + .suspend = pcspkr_suspend, +}; + static struct platform_driver pcspkr_platform_driver = { .driver = { .name = "pcspkr", .owner = THIS_MODULE, + .pm = &pcspkr_pm_ops, }, .probe = pcspkr_probe, .remove = __devexit_p(pcspkr_remove), - .suspend = pcspkr_suspend, .shutdown = pcspkr_shutdown, }; -- cgit v1.2.3 From f0a14de2f82dd6aa13e04816da2091c7ed0f77cf Mon Sep 17 00:00:00 2001 From: Simon Davie Date: Sun, 12 Jul 2009 20:44:09 -0700 Subject: Input: atkbd - add forced release keys quirk for FSC Amilo Pi 3525 This patch enables forced releasing of the Fn+Volume hotkeys on the Fujitsu Siemens Amilo Pi 3525 notebook. Signed-off-by: Simon Davie Signed-off-by: Dmitry Torokhov --- drivers/input/keyboard/atkbd.c | 16 ++++++++++++++++ 1 file changed, 16 insertions(+) diff --git a/drivers/input/keyboard/atkbd.c b/drivers/input/keyboard/atkbd.c index df3f8aa6811..809a7ddbe3a 100644 --- a/drivers/input/keyboard/atkbd.c +++ b/drivers/input/keyboard/atkbd.c @@ -894,6 +894,13 @@ static unsigned int atkbd_amilo_pa1510_forced_release_keys[] = { 0xb0, 0xae, -1U }; +/* + * Amilo Pi 3525 key release for Fn+Volume keys not working + */ +static unsigned int atkbd_amilo_pi3525_forced_release_keys[] = { + 0x20, 0xa0, 0x2e, 0xae, 0x30, 0xb0, -1U +}; + /* * Amilo Xi 3650 key release for light touch bar not working */ @@ -1567,6 +1574,15 @@ static struct dmi_system_id atkbd_dmi_quirk_table[] __initdata = { .callback = atkbd_setup_forced_release, .driver_data = atkbd_amilo_pa1510_forced_release_keys, }, + { + .ident = "Fujitsu Amilo Pi 3525", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "FUJITSU SIEMENS"), + DMI_MATCH(DMI_PRODUCT_NAME, "AMILO Pi 3525"), + }, + .callback = atkbd_setup_forced_release, + .driver_data = atkbd_amilo_pi3525_forced_release_keys, + }, { .ident = "Fujitsu Amilo Xi 3650", .matches = { -- cgit v1.2.3 From f1c6a58121f9846ac665b0fbd3cbab90ce8bcbac Mon Sep 17 00:00:00 2001 From: Daniel Qarras Date: Sun, 12 Jul 2009 04:32:40 -0700 Subject: perf_counter, x86: Extend perf_counter Pentium M support I've attached a patch to remove the Pentium M special casing of EMON and as noticed at least with my Pentium M the hardware PMU now works: Performance counter stats for '/bin/ls /var/tmp': 1.809988 task-clock-msecs # 0.125 CPUs 1 context-switches # 0.001 M/sec 0 CPU-migrations # 0.000 M/sec 224 page-faults # 0.124 M/sec 1425648 cycles # 787.656 M/sec 912755 instructions # 0.640 IPC Vince suggested that this code was trying to address erratum Y17 in Pentium-M's: http://download.intel.com/support/processors/mobile/pm/sb/25266532.pdf But that erratum (related to IA32_MISC_ENABLES.7) does not affect perfcounters as we dont use this toggle to disable RDPMC and WRMSR/RDMSR access to performance counters. We keep cr4's bit 8 (X86_CR4_PCE) clear so unprivileged RDPMC access is not allowed anyway. Cc: Vince Weaver Cc: Peter Zijlstra Cc: Stephane Eranian LKML-Reference: Signed-off-by: Ingo Molnar --- arch/x86/kernel/cpu/perf_counter.c | 6 ++---- 1 file changed, 2 insertions(+), 4 deletions(-) diff --git a/arch/x86/kernel/cpu/perf_counter.c b/arch/x86/kernel/cpu/perf_counter.c index bed1c4c2f25..7e346d4bc0f 100644 --- a/arch/x86/kernel/cpu/perf_counter.c +++ b/arch/x86/kernel/cpu/perf_counter.c @@ -1583,10 +1583,8 @@ static int p6_pmu_init(void) break; case 9: case 13: - /* for Pentium M, we need to check if PMU exist */ - rdmsr(MSR_IA32_MISC_ENABLE, low, high); - if (low & MSR_IA32_MISC_ENABLE_EMON) - break; + /* Pentium M */ + break; default: pr_cont("unsupported p6 CPU model %d ", boot_cpu_data.x86_model); -- cgit v1.2.3 From d4d7d0b9545721d3cabb19d15163bbc66b797707 Mon Sep 17 00:00:00 2001 From: Chris Wilson Date: Mon, 6 Jul 2009 09:31:33 +0100 Subject: perf_counter: Fix the tracepoint channel to perfcounters Fix a missed rename in EVENT_PROFILE support so that it gets built and allows tracepoint tracing from the 'perf' tool. Fix a typo in the (never before built & enabled) portion in perf_counter.c as well, and update that code to the attr.config changes as well. Signed-off-by: Chris Wilson Cc: Ben Gamari Cc: Jason Baron Cc: Frederic Weisbecker Cc: Mike Galbraith Cc: Peter Zijlstra Cc: Paul Mackerras Cc: Steven Rostedt LKML-Reference: <1246869094-21237-1-git-send-email-chris@chris-wilson.co.uk> Signed-off-by: Ingo Molnar --- init/Kconfig | 2 +- kernel/perf_counter.c | 10 +++------- 2 files changed, 4 insertions(+), 8 deletions(-) diff --git a/init/Kconfig b/init/Kconfig index 1ce05a4cb5f..cb2c0927022 100644 --- a/init/Kconfig +++ b/init/Kconfig @@ -962,7 +962,7 @@ config PERF_COUNTERS config EVENT_PROFILE bool "Tracepoint profile sources" - depends on PERF_COUNTERS && EVENT_TRACER + depends on PERF_COUNTERS && EVENT_TRACING default y endmenu diff --git a/kernel/perf_counter.c b/kernel/perf_counter.c index d55a50da234..c6c38fb7766 100644 --- a/kernel/perf_counter.c +++ b/kernel/perf_counter.c @@ -3671,7 +3671,7 @@ static const struct pmu perf_ops_task_clock = { void perf_tpcounter_event(int event_id) { struct perf_sample_data data = { - .regs = get_irq_regs(); + .regs = get_irq_regs(), .addr = 0, }; @@ -3687,16 +3687,12 @@ extern void ftrace_profile_disable(int); static void tp_perf_counter_destroy(struct perf_counter *counter) { - ftrace_profile_disable(perf_event_id(&counter->attr)); + ftrace_profile_disable(counter->attr.config); } static const struct pmu *tp_perf_counter_init(struct perf_counter *counter) { - int event_id = perf_event_id(&counter->attr); - int ret; - - ret = ftrace_profile_enable(event_id); - if (ret) + if (ftrace_profile_enable(counter->attr.config)) return NULL; counter->destroy = tp_perf_counter_destroy; -- cgit v1.2.3 From 23cdb5d5171d591ec911aada682e09d53c14a810 Mon Sep 17 00:00:00 2001 From: Roel Kluin Date: Mon, 13 Jul 2009 02:25:47 +0200 Subject: perf_counter tools: Fix index boundary check Keep index within event_type_descriptors[] Signed-off-by: Roel Kluin Cc: Andrew Morton Cc: Peter Zijlstra Cc: Mike Galbraith Cc: Paul Mackerras Cc: Arnaldo Carvalho de Melo Cc: Frederic Weisbecker LKML-Reference: <4A5A7F0B.4070106@gmail.com> Signed-off-by: Ingo Molnar --- tools/perf/util/parse-events.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/tools/perf/util/parse-events.c b/tools/perf/util/parse-events.c index 518a33affe1..d18c98edd00 100644 --- a/tools/perf/util/parse-events.c +++ b/tools/perf/util/parse-events.c @@ -436,7 +436,7 @@ void print_events(void) for (i = 0; i < ARRAY_SIZE(event_symbols); i++, syms++) { type = syms->type + 1; - if (type > ARRAY_SIZE(event_type_descriptors)) + if (type >= ARRAY_SIZE(event_type_descriptors)) type = 0; if (type != prev_type) -- cgit v1.2.3 From d0b6e04a4cd8360e3c9c419f7c30a3081a0c142a Mon Sep 17 00:00:00 2001 From: Li Zefan Date: Mon, 13 Jul 2009 10:33:21 +0800 Subject: tracing/events: Move TRACE_SYSTEM outside of include guard If TRACE_INCLDUE_FILE is defined, will be included and compiled, otherwise it will be So TRACE_SYSTEM should be defined outside of #if proctection, just like TRACE_INCLUDE_FILE. Imaging this scenario: #include -> TRACE_SYSTEM == foo ... #include -> TRACE_SYSTEM == bar ... #define CREATE_TRACE_POINTS #include -> TRACE_SYSTEM == bar !!! and then bar.h will be included and compiled. Signed-off-by: Li Zefan Cc: Steven Rostedt Cc: Frederic Weisbecker LKML-Reference: <4A5A9CF1.2010007@cn.fujitsu.com> Signed-off-by: Ingo Molnar --- fs/gfs2/trace_gfs2.h | 8 +++---- include/trace/events/block.h | 6 ++--- include/trace/events/ext4.h | 6 ++--- include/trace/events/irq.h | 6 ++--- include/trace/events/jbd2.h | 6 ++--- include/trace/events/kmem.h | 6 ++--- include/trace/events/lockdep.h | 6 ++--- include/trace/events/sched.h | 6 ++--- include/trace/events/skb.h | 6 ++--- include/trace/events/workqueue.h | 6 ++--- samples/trace_events/trace-events-sample.h | 37 ++++++++++++++++-------------- 11 files changed, 51 insertions(+), 48 deletions(-) diff --git a/fs/gfs2/trace_gfs2.h b/fs/gfs2/trace_gfs2.h index 98d6ef1c1dc..148d55c1417 100644 --- a/fs/gfs2/trace_gfs2.h +++ b/fs/gfs2/trace_gfs2.h @@ -1,12 +1,11 @@ +#undef TRACE_SYSTEM +#define TRACE_SYSTEM gfs2 + #if !defined(_TRACE_GFS2_H) || defined(TRACE_HEADER_MULTI_READ) #define _TRACE_GFS2_H #include -#undef TRACE_SYSTEM -#define TRACE_SYSTEM gfs2 -#define TRACE_INCLUDE_FILE trace_gfs2 - #include #include #include @@ -403,5 +402,6 @@ TRACE_EVENT(gfs2_block_alloc, /* This part must be outside protection */ #undef TRACE_INCLUDE_PATH #define TRACE_INCLUDE_PATH . +#define TRACE_INCLUDE_FILE trace_gfs2 #include diff --git a/include/trace/events/block.h b/include/trace/events/block.h index d6b05f42dd4..9a74b468a22 100644 --- a/include/trace/events/block.h +++ b/include/trace/events/block.h @@ -1,3 +1,6 @@ +#undef TRACE_SYSTEM +#define TRACE_SYSTEM block + #if !defined(_TRACE_BLOCK_H) || defined(TRACE_HEADER_MULTI_READ) #define _TRACE_BLOCK_H @@ -5,9 +8,6 @@ #include #include -#undef TRACE_SYSTEM -#define TRACE_SYSTEM block - TRACE_EVENT(block_rq_abort, TP_PROTO(struct request_queue *q, struct request *rq), diff --git a/include/trace/events/ext4.h b/include/trace/events/ext4.h index acf4cc9cd36..8eb82cc8d14 100644 --- a/include/trace/events/ext4.h +++ b/include/trace/events/ext4.h @@ -1,9 +1,9 @@ -#if !defined(_TRACE_EXT4_H) || defined(TRACE_HEADER_MULTI_READ) -#define _TRACE_EXT4_H - #undef TRACE_SYSTEM #define TRACE_SYSTEM ext4 +#if !defined(_TRACE_EXT4_H) || defined(TRACE_HEADER_MULTI_READ) +#define _TRACE_EXT4_H + #include #include "../../../fs/ext4/ext4.h" #include "../../../fs/ext4/mballoc.h" diff --git a/include/trace/events/irq.h b/include/trace/events/irq.h index b0c7ede55eb..1cb0c3aa11e 100644 --- a/include/trace/events/irq.h +++ b/include/trace/events/irq.h @@ -1,12 +1,12 @@ +#undef TRACE_SYSTEM +#define TRACE_SYSTEM irq + #if !defined(_TRACE_IRQ_H) || defined(TRACE_HEADER_MULTI_READ) #define _TRACE_IRQ_H #include #include -#undef TRACE_SYSTEM -#define TRACE_SYSTEM irq - #define softirq_name(sirq) { sirq##_SOFTIRQ, #sirq } #define show_softirq_name(val) \ __print_symbolic(val, \ diff --git a/include/trace/events/jbd2.h b/include/trace/events/jbd2.h index 845b0b4b48f..10813fa0c8d 100644 --- a/include/trace/events/jbd2.h +++ b/include/trace/events/jbd2.h @@ -1,12 +1,12 @@ +#undef TRACE_SYSTEM +#define TRACE_SYSTEM jbd2 + #if !defined(_TRACE_JBD2_H) || defined(TRACE_HEADER_MULTI_READ) #define _TRACE_JBD2_H #include #include -#undef TRACE_SYSTEM -#define TRACE_SYSTEM jbd2 - TRACE_EVENT(jbd2_checkpoint, TP_PROTO(journal_t *journal, int result), diff --git a/include/trace/events/kmem.h b/include/trace/events/kmem.h index 9baba50d651..1493c541f9c 100644 --- a/include/trace/events/kmem.h +++ b/include/trace/events/kmem.h @@ -1,12 +1,12 @@ +#undef TRACE_SYSTEM +#define TRACE_SYSTEM kmem + #if !defined(_TRACE_KMEM_H) || defined(TRACE_HEADER_MULTI_READ) #define _TRACE_KMEM_H #include #include -#undef TRACE_SYSTEM -#define TRACE_SYSTEM kmem - /* * The order of these masks is important. Matching masks will be seen * first and the left over flags will end up showing by themselves. diff --git a/include/trace/events/lockdep.h b/include/trace/events/lockdep.h index 0e956c9dfd7..bcf1d209a00 100644 --- a/include/trace/events/lockdep.h +++ b/include/trace/events/lockdep.h @@ -1,12 +1,12 @@ +#undef TRACE_SYSTEM +#define TRACE_SYSTEM lockdep + #if !defined(_TRACE_LOCKDEP_H) || defined(TRACE_HEADER_MULTI_READ) #define _TRACE_LOCKDEP_H #include #include -#undef TRACE_SYSTEM -#define TRACE_SYSTEM lockdep - #ifdef CONFIG_LOCKDEP TRACE_EVENT(lock_acquire, diff --git a/include/trace/events/sched.h b/include/trace/events/sched.h index 24ab5bcff7b..8949bb7eb08 100644 --- a/include/trace/events/sched.h +++ b/include/trace/events/sched.h @@ -1,12 +1,12 @@ +#undef TRACE_SYSTEM +#define TRACE_SYSTEM sched + #if !defined(_TRACE_SCHED_H) || defined(TRACE_HEADER_MULTI_READ) #define _TRACE_SCHED_H #include #include -#undef TRACE_SYSTEM -#define TRACE_SYSTEM sched - /* * Tracepoint for calling kthread_stop, performed to end a kthread: */ diff --git a/include/trace/events/skb.h b/include/trace/events/skb.h index 1e8fabb57c0..e499863b966 100644 --- a/include/trace/events/skb.h +++ b/include/trace/events/skb.h @@ -1,12 +1,12 @@ +#undef TRACE_SYSTEM +#define TRACE_SYSTEM skb + #if !defined(_TRACE_SKB_H) || defined(TRACE_HEADER_MULTI_READ) #define _TRACE_SKB_H #include #include -#undef TRACE_SYSTEM -#define TRACE_SYSTEM skb - /* * Tracepoint for free an sk_buff: */ diff --git a/include/trace/events/workqueue.h b/include/trace/events/workqueue.h index 035f1bff288..fcfd9a1e4b9 100644 --- a/include/trace/events/workqueue.h +++ b/include/trace/events/workqueue.h @@ -1,3 +1,6 @@ +#undef TRACE_SYSTEM +#define TRACE_SYSTEM workqueue + #if !defined(_TRACE_WORKQUEUE_H) || defined(TRACE_HEADER_MULTI_READ) #define _TRACE_WORKQUEUE_H @@ -5,9 +8,6 @@ #include #include -#undef TRACE_SYSTEM -#define TRACE_SYSTEM workqueue - TRACE_EVENT(workqueue_insertion, TP_PROTO(struct task_struct *wq_thread, struct work_struct *work), diff --git a/samples/trace_events/trace-events-sample.h b/samples/trace_events/trace-events-sample.h index 9977a756fb3..f24ae370e51 100644 --- a/samples/trace_events/trace-events-sample.h +++ b/samples/trace_events/trace-events-sample.h @@ -1,20 +1,3 @@ -/* - * Notice that this file is not protected like a normal header. - * We also must allow for rereading of this file. The - * - * || defined(TRACE_HEADER_MULTI_READ) - * - * serves this purpose. - */ -#if !defined(_TRACE_EVENT_SAMPLE_H) || defined(TRACE_HEADER_MULTI_READ) -#define _TRACE_EVENT_SAMPLE_H - -/* - * All trace headers should include tracepoint.h, until we finally - * make it into a standard header. - */ -#include - /* * If TRACE_SYSTEM is defined, that will be the directory created * in the ftrace directory under /debugfs/tracing/events/ @@ -34,10 +17,30 @@ * #define TRACE_INCLUDE_FILE trace-events-sample * * As we do an the bottom of this file. + * + * Notice that TRACE_SYSTEM should be defined outside of #if + * protection, just like TRACE_INCLUDE_FILE. */ #undef TRACE_SYSTEM #define TRACE_SYSTEM sample +/* + * Notice that this file is not protected like a normal header. + * We also must allow for rereading of this file. The + * + * || defined(TRACE_HEADER_MULTI_READ) + * + * serves this purpose. + */ +#if !defined(_TRACE_EVENT_SAMPLE_H) || defined(TRACE_HEADER_MULTI_READ) +#define _TRACE_EVENT_SAMPLE_H + +/* + * All trace headers should include tracepoint.h, until we finally + * make it into a standard header. + */ +#include + /* * The TRACE_EVENT macro is broken up into 5 parts. * -- cgit v1.2.3 From 6ab5d668b131d3c5416f6df1d3ca95b82d4fe8a2 Mon Sep 17 00:00:00 2001 From: Steven Rostedt Date: Thu, 4 Jun 2009 00:55:45 -0400 Subject: tracing/function-profiler: do not free per cpu variable stat The per cpu variable stat is freeded if we fail to allocate a name on start up. This was due to stat at first being allocated in the initial design. But since then, it has become a static per cpu variable but the free on error was not removed. Also added __init annotation to the function that this is in. [ Impact: prevent possible memory corruption on low mem at boot up ] Signed-off-by: Steven Rostedt Signed-off-by: Ingo Molnar --- kernel/trace/ftrace.c | 5 ++--- 1 file changed, 2 insertions(+), 3 deletions(-) diff --git a/kernel/trace/ftrace.c b/kernel/trace/ftrace.c index bce9e01a29c..4521c77d1a1 100644 --- a/kernel/trace/ftrace.c +++ b/kernel/trace/ftrace.c @@ -768,7 +768,7 @@ static struct tracer_stat function_stats __initdata = { .stat_show = function_stat_show }; -static void ftrace_profile_debugfs(struct dentry *d_tracer) +static __init void ftrace_profile_debugfs(struct dentry *d_tracer) { struct ftrace_profile_stat *stat; struct dentry *entry; @@ -786,7 +786,6 @@ static void ftrace_profile_debugfs(struct dentry *d_tracer) * The files created are permanent, if something happens * we still do not free memory. */ - kfree(stat); WARN(1, "Could not allocate stat file for cpu %d\n", cpu); @@ -813,7 +812,7 @@ static void ftrace_profile_debugfs(struct dentry *d_tracer) } #else /* CONFIG_FUNCTION_PROFILER */ -static void ftrace_profile_debugfs(struct dentry *d_tracer) +static __init void ftrace_profile_debugfs(struct dentry *d_tracer) { } #endif /* CONFIG_FUNCTION_PROFILER */ -- cgit v1.2.3 From 151586d0f70405d99324d89aea13706cf6d7f993 Mon Sep 17 00:00:00 2001 From: Rakib Mullick Date: Sun, 12 Jul 2009 17:04:12 +0600 Subject: x86: Fix false positive section mismatch in es7000_32.c The variable apic_es7000_cluster references the function __cpuinit wakeup_secondary_cpu_via_mip() from a noninit section. So we've been warned by the following warning. To avoid possible collision between init/noninit, its best to mark the variable as __refdata. We were warned by the following warning: LD arch/x86/kernel/apic/built-in.o WARNING: arch/x86/kernel/apic/built-in.o(.data+0x198c): Section mismatch in reference from the variable apic_es7000_cluster to the function .cpuinit.text:wakeup_secondary_cpu_via_mip() Signed-off-by: Rakib Mullick LKML-Reference: Signed-off-by: Ingo Molnar --- arch/x86/kernel/apic/es7000_32.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/arch/x86/kernel/apic/es7000_32.c b/arch/x86/kernel/apic/es7000_32.c index 69328ac8de9..8952a589028 100644 --- a/arch/x86/kernel/apic/es7000_32.c +++ b/arch/x86/kernel/apic/es7000_32.c @@ -652,7 +652,8 @@ static int es7000_mps_oem_check_cluster(struct mpc_table *mpc, char *oem, return ret && es7000_apic_is_cluster(); } -struct apic apic_es7000_cluster = { +/* We've been warned by a false positive warning.Use __refdata to keep calm. */ +struct apic __refdata apic_es7000_cluster = { .name = "es7000", .probe = probe_es7000, -- cgit v1.2.3 From 7473727be884293c8171775a148e1d174d1606e6 Mon Sep 17 00:00:00 2001 From: Rakib Mullick Date: Sun, 12 Jul 2009 17:07:19 +0600 Subject: x86, apic: Fix false positive section mismatch in numaq_32.c The variable apic_numaq placed in noninit section references the function wakeup_secondary_cpu_via_nmi(), which is in __cpuinit section. Thus causes a section mismatch warning. To avoid such mismatch we mark apic_numaq as __refdata. We were warned by the following warning: WARNING: arch/x86/kernel/built-in.o(.data+0x932c): Section mismatch in reference from the variable apic_numaq to the function .cpuinit.text:wakeup_secondary_cpu_via_nmi() Signed-off-by: Rakib Mullick LKML-Reference: Signed-off-by: Ingo Molnar --- arch/x86/kernel/apic/numaq_32.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/arch/x86/kernel/apic/numaq_32.c b/arch/x86/kernel/apic/numaq_32.c index 533e59c6fc8..ca96e68f0d2 100644 --- a/arch/x86/kernel/apic/numaq_32.c +++ b/arch/x86/kernel/apic/numaq_32.c @@ -493,7 +493,8 @@ static void numaq_setup_portio_remap(void) (u_long) xquad_portio, (u_long) num_quads*XQUAD_PORTIO_QUAD); } -struct apic apic_numaq = { +/* Use __refdata to keep false positive warning calm. */ +struct apic __refdata apic_numaq = { .name = "NUMAQ", .probe = probe_numaq, -- cgit v1.2.3 From e6b5d30104db5f34110678ecab14988f1f1eff63 Mon Sep 17 00:00:00 2001 From: Curt Wohlgemuth Date: Mon, 13 Jul 2009 09:07:20 -0400 Subject: ext4: Fix buffer head reference leak in no-journal mode We found a problem with buffer head reference leaks when using an ext4 partition without a journal. In particular, calls to ext4_forget() would not to a brelse() on the input buffer head, which will cause pages they belong to to not be reclaimable. Further investigation showed that all places where ext4_journal_forget() and ext4_journal_revoke() are called are subject to the same problem. The patch below changes __ext4_journal_forget/__ext4_journal_revoke to do an explicit release of the buffer head when the journal handle isn't valid. Signed-off-by: Curt Wohlgemuth Signed-off-by: "Theodore Ts'o" --- fs/ext4/ext4_jbd2.c | 4 ++++ fs/ext4/ext4_jbd2.h | 2 ++ fs/ext4/inode.c | 6 ++---- 3 files changed, 8 insertions(+), 4 deletions(-) diff --git a/fs/ext4/ext4_jbd2.c b/fs/ext4/ext4_jbd2.c index ad13a84644e..eb27fd0f2ee 100644 --- a/fs/ext4/ext4_jbd2.c +++ b/fs/ext4/ext4_jbd2.c @@ -43,6 +43,8 @@ int __ext4_journal_forget(const char *where, handle_t *handle, ext4_journal_abort_handle(where, __func__, bh, handle, err); } + else + brelse(bh); return err; } @@ -57,6 +59,8 @@ int __ext4_journal_revoke(const char *where, handle_t *handle, ext4_journal_abort_handle(where, __func__, bh, handle, err); } + else + brelse(bh); return err; } diff --git a/fs/ext4/ext4_jbd2.h b/fs/ext4/ext4_jbd2.h index d574a85aca5..139fb8cb87e 100644 --- a/fs/ext4/ext4_jbd2.h +++ b/fs/ext4/ext4_jbd2.h @@ -131,9 +131,11 @@ int __ext4_journal_get_undo_access(const char *where, handle_t *handle, int __ext4_journal_get_write_access(const char *where, handle_t *handle, struct buffer_head *bh); +/* When called with an invalid handle, this will still do a put on the BH */ int __ext4_journal_forget(const char *where, handle_t *handle, struct buffer_head *bh); +/* When called with an invalid handle, this will still do a put on the BH */ int __ext4_journal_revoke(const char *where, handle_t *handle, ext4_fsblk_t blocknr, struct buffer_head *bh); diff --git a/fs/ext4/inode.c b/fs/ext4/inode.c index c98e3afea30..f9c642b22ef 100644 --- a/fs/ext4/inode.c +++ b/fs/ext4/inode.c @@ -78,16 +78,14 @@ static int ext4_inode_is_fast_symlink(struct inode *inode) * but there may still be a record of it in the journal, and that record * still needs to be revoked. * - * If the handle isn't valid we're not journaling so there's nothing to do. + * If the handle isn't valid we're not journaling, but we still need to + * call into ext4_journal_revoke() to put the buffer head. */ int ext4_forget(handle_t *handle, int is_metadata, struct inode *inode, struct buffer_head *bh, ext4_fsblk_t blocknr) { int err; - if (!ext4_handle_valid(handle)) - return 0; - might_sleep(); BUFFER_TRACE(bh, "enter"); -- cgit v1.2.3 From ac046f1d6121ccdda6db66bd88acd52418f489b2 Mon Sep 17 00:00:00 2001 From: Peng Tao Date: Mon, 13 Jul 2009 09:30:17 -0400 Subject: ext4: fix null handler of ioctls in no journal mode The EXT4_IOC_GROUP_ADD and EXT4_IOC_GROUP_EXTEND ioctls should not flush the journal in no_journal mode. Otherwise, running resize2fs on a mounted no_journal partition triggers the following error messages: BUG: unable to handle kernel NULL pointer dereference at 00000014 IP: [] _spin_lock+0x8/0x19 *pde = 00000000 Oops: 0002 [#1] SMP Signed-off-by: Peng Tao Signed-off-by: "Theodore Ts'o" --- fs/ext4/ioctl.c | 20 ++++++++++++-------- 1 file changed, 12 insertions(+), 8 deletions(-) diff --git a/fs/ext4/ioctl.c b/fs/ext4/ioctl.c index bb415408fdb..01f149aea84 100644 --- a/fs/ext4/ioctl.c +++ b/fs/ext4/ioctl.c @@ -192,7 +192,7 @@ setversion_out: case EXT4_IOC_GROUP_EXTEND: { ext4_fsblk_t n_blocks_count; struct super_block *sb = inode->i_sb; - int err, err2; + int err, err2=0; if (!capable(CAP_SYS_RESOURCE)) return -EPERM; @@ -205,9 +205,11 @@ setversion_out: return err; err = ext4_group_extend(sb, EXT4_SB(sb)->s_es, n_blocks_count); - jbd2_journal_lock_updates(EXT4_SB(sb)->s_journal); - err2 = jbd2_journal_flush(EXT4_SB(sb)->s_journal); - jbd2_journal_unlock_updates(EXT4_SB(sb)->s_journal); + if (EXT4_SB(sb)->s_journal) { + jbd2_journal_lock_updates(EXT4_SB(sb)->s_journal); + err2 = jbd2_journal_flush(EXT4_SB(sb)->s_journal); + jbd2_journal_unlock_updates(EXT4_SB(sb)->s_journal); + } if (err == 0) err = err2; mnt_drop_write(filp->f_path.mnt); @@ -252,7 +254,7 @@ setversion_out: case EXT4_IOC_GROUP_ADD: { struct ext4_new_group_data input; struct super_block *sb = inode->i_sb; - int err, err2; + int err, err2=0; if (!capable(CAP_SYS_RESOURCE)) return -EPERM; @@ -266,9 +268,11 @@ setversion_out: return err; err = ext4_group_add(sb, &input); - jbd2_journal_lock_updates(EXT4_SB(sb)->s_journal); - err2 = jbd2_journal_flush(EXT4_SB(sb)->s_journal); - jbd2_journal_unlock_updates(EXT4_SB(sb)->s_journal); + if (EXT4_SB(sb)->s_journal) { + jbd2_journal_lock_updates(EXT4_SB(sb)->s_journal); + err2 = jbd2_journal_flush(EXT4_SB(sb)->s_journal); + jbd2_journal_unlock_updates(EXT4_SB(sb)->s_journal); + } if (err == 0) err = err2; mnt_drop_write(filp->f_path.mnt); -- cgit v1.2.3 From 833576b362e15c38be3bfe43942cda693e56287c Mon Sep 17 00:00:00 2001 From: Theodore Ts'o Date: Mon, 13 Jul 2009 09:45:52 -0400 Subject: ext4: Fix ext4_mb_initialize_context() to initialize all fields Pavel Roskin pointed out that kmemcheck indicated that ext4_mb_store_history() was accessing uninitialized values of ac->ac_tail and ac->ac_buddy leading to garbage in the mballoc history. Fix this by initializing the entire structure to all zeros first. Also, two fields were getting doubly initialized by the caller of ext4_mb_initialize_context, so remove them for efficiency's sake. Signed-off-by: "Theodore Ts'o" --- fs/ext4/mballoc.c | 20 ++------------------ 1 file changed, 2 insertions(+), 18 deletions(-) diff --git a/fs/ext4/mballoc.c b/fs/ext4/mballoc.c index 2fcaf286f1d..cd258463e2a 100644 --- a/fs/ext4/mballoc.c +++ b/fs/ext4/mballoc.c @@ -4227,14 +4227,9 @@ ext4_mb_initialize_context(struct ext4_allocation_context *ac, ext4_get_group_no_and_offset(sb, goal, &group, &block); /* set up allocation goals */ + memset(ac, 0, sizeof(struct ext4_allocation_context)); ac->ac_b_ex.fe_logical = ar->logical; - ac->ac_b_ex.fe_group = 0; - ac->ac_b_ex.fe_start = 0; - ac->ac_b_ex.fe_len = 0; ac->ac_status = AC_STATUS_CONTINUE; - ac->ac_groups_scanned = 0; - ac->ac_ex_scanned = 0; - ac->ac_found = 0; ac->ac_sb = sb; ac->ac_inode = ar->inode; ac->ac_o_ex.fe_logical = ar->logical; @@ -4245,15 +4240,7 @@ ext4_mb_initialize_context(struct ext4_allocation_context *ac, ac->ac_g_ex.fe_group = group; ac->ac_g_ex.fe_start = block; ac->ac_g_ex.fe_len = len; - ac->ac_f_ex.fe_len = 0; ac->ac_flags = ar->flags; - ac->ac_2order = 0; - ac->ac_criteria = 0; - ac->ac_pa = NULL; - ac->ac_bitmap_page = NULL; - ac->ac_buddy_page = NULL; - ac->alloc_semp = NULL; - ac->ac_lg = NULL; /* we have to define context: we'll we work with a file or * locality group. this is a policy, actually */ @@ -4521,10 +4508,7 @@ ext4_fsblk_t ext4_mb_new_blocks(handle_t *handle, } ac = kmem_cache_alloc(ext4_ac_cachep, GFP_NOFS); - if (ac) { - ac->ac_sb = sb; - ac->ac_inode = ar->inode; - } else { + if (!ac) { ar->len = 0; *errp = -ENOMEM; goto out1; -- cgit v1.2.3 From 1d03d2bd6e6421224d618b120348bd5ee328d96a Mon Sep 17 00:00:00 2001 From: Jean Delvare Date: Mon, 13 Jul 2009 12:39:05 +0200 Subject: Fix staging drivers after smp_lock.h redux Commit 405f55712dfe464b3240d7816cc4fe4174831be2 ("headers: smp_lock.h redux") broke the build of two staging drivers. Fix them. Signed-off-by: Jean Delvare Cc: Alexey Dobriyan Signed-off-by: Linus Torvalds --- drivers/staging/go7007/s2250-loader.c | 1 + drivers/staging/usbip/usbip_common.c | 1 + 2 files changed, 2 insertions(+) diff --git a/drivers/staging/go7007/s2250-loader.c b/drivers/staging/go7007/s2250-loader.c index a5e4acab089..bb22347af60 100644 --- a/drivers/staging/go7007/s2250-loader.c +++ b/drivers/staging/go7007/s2250-loader.c @@ -17,6 +17,7 @@ #include #include +#include #include #include diff --git a/drivers/staging/usbip/usbip_common.c b/drivers/staging/usbip/usbip_common.c index 22f93dd0ba0..251220dc885 100644 --- a/drivers/staging/usbip/usbip_common.c +++ b/drivers/staging/usbip/usbip_common.c @@ -18,6 +18,7 @@ */ #include +#include #include #include #include -- cgit v1.2.3 From 5fddcdb70fd9e8fd52d42ed52a572fecb8eb7cde Mon Sep 17 00:00:00 2001 From: Huang Weiyi Date: Mon, 13 Jul 2009 15:09:25 +0100 Subject: mn10300: remove duplicated #include Remove duplicated #include('s) in arch/mn10300/kernel/sys_mn10300.c Signed-off-by: Huang Weiyi Signed-off-by: David Howells Signed-off-by: Linus Torvalds --- arch/mn10300/kernel/sys_mn10300.c | 1 - 1 file changed, 1 deletion(-) diff --git a/arch/mn10300/kernel/sys_mn10300.c b/arch/mn10300/kernel/sys_mn10300.c index 29d196b83d2..3e52a105432 100644 --- a/arch/mn10300/kernel/sys_mn10300.c +++ b/arch/mn10300/kernel/sys_mn10300.c @@ -20,7 +20,6 @@ #include #include #include -#include #include #include -- cgit v1.2.3 From 8f8f013478133eb98e35e1d669c98c5e39d769c7 Mon Sep 17 00:00:00 2001 From: Dave Kleikamp Date: Mon, 13 Jul 2009 11:02:24 -0500 Subject: update JFS entry in MAINTAINERS JFS hasn't really been supported for a while. It's still maintained, but saying it's supported is a stretch. Updating my preferred email address as well. Signed-off-by: Dave Kleikamp Signed-off-by: Linus Torvalds --- MAINTAINERS | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/MAINTAINERS b/MAINTAINERS index 9d1601ec131..18c3f0c41c9 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -3287,11 +3287,11 @@ F: include/linux/ivtv* JFS FILESYSTEM P: Dave Kleikamp -M: shaggy@austin.ibm.com +M: shaggy@linux.vnet.ibm.com L: jfs-discussion@lists.sourceforge.net W: http://jfs.sourceforge.net/ T: git git://git.kernel.org/pub/scm/linux/kernel/git/shaggy/jfs-2.6.git -S: Supported +S: Maintained F: Documentation/filesystems/jfs.txt F: fs/jfs/ -- cgit v1.2.3 From 41796e91a2a30fd82a0fd561022489b61f8a3188 Mon Sep 17 00:00:00 2001 From: roel kluin Date: Sun, 12 Jul 2009 13:12:37 +0000 Subject: atlx: duplicate testing of MCAST flag Fix duplicate testing of MCAST flag Signed-off-by: Roel Kluin Acked-by: Jay Cliburn Signed-off-by: David S. Miller --- drivers/net/atlx/atl2.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/atlx/atl2.c b/drivers/net/atlx/atl2.c index c734b1983ec..204db961029 100644 --- a/drivers/net/atlx/atl2.c +++ b/drivers/net/atlx/atl2.c @@ -2071,7 +2071,7 @@ static int atl2_set_wol(struct net_device *netdev, struct ethtool_wolinfo *wol) if (wol->wolopts & (WAKE_ARP | WAKE_MAGICSECURE)) return -EOPNOTSUPP; - if (wol->wolopts & (WAKE_MCAST|WAKE_BCAST|WAKE_MCAST)) + if (wol->wolopts & (WAKE_UCAST | WAKE_BCAST | WAKE_MCAST)) return -EOPNOTSUPP; /* these settings will always override what we currently have */ -- cgit v1.2.3 From c8159b2db1b49f6bda4429008c85108e2da60712 Mon Sep 17 00:00:00 2001 From: Eric Dumazet Date: Mon, 13 Jul 2009 11:11:41 -0700 Subject: igb: gcc-3.4.6 fix forward declaration of inline function should be avoided, or old gcc cannot compile. Reported-by: Teck Choon Giam Signed-off-by: Eric Dumazet Signed-off-by: David S. Miller --- drivers/net/igb/igb_main.c | 77 ++++++++++++++++++++++------------------------ 1 file changed, 37 insertions(+), 40 deletions(-) diff --git a/drivers/net/igb/igb_main.c b/drivers/net/igb/igb_main.c index be480292aba..adb09d32625 100644 --- a/drivers/net/igb/igb_main.c +++ b/drivers/net/igb/igb_main.c @@ -127,14 +127,48 @@ static void igb_restore_vlan(struct igb_adapter *); static void igb_ping_all_vfs(struct igb_adapter *); static void igb_msg_task(struct igb_adapter *); static int igb_rcv_msg_from_vf(struct igb_adapter *, u32); -static inline void igb_set_rah_pool(struct e1000_hw *, int , int); static void igb_set_mc_list_pools(struct igb_adapter *, int, u16); static void igb_vmm_control(struct igb_adapter *); -static inline void igb_set_vmolr(struct e1000_hw *, int); -static inline int igb_set_vf_rlpml(struct igb_adapter *, int, int); static int igb_set_vf_mac(struct igb_adapter *adapter, int, unsigned char *); static void igb_restore_vf_multicasts(struct igb_adapter *adapter); +static inline void igb_set_vmolr(struct e1000_hw *hw, int vfn) +{ + u32 reg_data; + + reg_data = rd32(E1000_VMOLR(vfn)); + reg_data |= E1000_VMOLR_BAM | /* Accept broadcast */ + E1000_VMOLR_ROPE | /* Accept packets matched in UTA */ + E1000_VMOLR_ROMPE | /* Accept packets matched in MTA */ + E1000_VMOLR_AUPE | /* Accept untagged packets */ + E1000_VMOLR_STRVLAN; /* Strip vlan tags */ + wr32(E1000_VMOLR(vfn), reg_data); +} + +static inline int igb_set_vf_rlpml(struct igb_adapter *adapter, int size, + int vfn) +{ + struct e1000_hw *hw = &adapter->hw; + u32 vmolr; + + vmolr = rd32(E1000_VMOLR(vfn)); + vmolr &= ~E1000_VMOLR_RLPML_MASK; + vmolr |= size | E1000_VMOLR_LPE; + wr32(E1000_VMOLR(vfn), vmolr); + + return 0; +} + +static inline void igb_set_rah_pool(struct e1000_hw *hw, int pool, int entry) +{ + u32 reg_data; + + reg_data = rd32(E1000_RAH(entry)); + reg_data &= ~E1000_RAH_POOL_MASK; + reg_data |= E1000_RAH_POOL_1 << pool;; + wr32(E1000_RAH(entry), reg_data); +} + #ifdef CONFIG_PM static int igb_suspend(struct pci_dev *, pm_message_t); static int igb_resume(struct pci_dev *); @@ -5418,43 +5452,6 @@ static void igb_io_resume(struct pci_dev *pdev) igb_get_hw_control(adapter); } -static inline void igb_set_vmolr(struct e1000_hw *hw, int vfn) -{ - u32 reg_data; - - reg_data = rd32(E1000_VMOLR(vfn)); - reg_data |= E1000_VMOLR_BAM | /* Accept broadcast */ - E1000_VMOLR_ROPE | /* Accept packets matched in UTA */ - E1000_VMOLR_ROMPE | /* Accept packets matched in MTA */ - E1000_VMOLR_AUPE | /* Accept untagged packets */ - E1000_VMOLR_STRVLAN; /* Strip vlan tags */ - wr32(E1000_VMOLR(vfn), reg_data); -} - -static inline int igb_set_vf_rlpml(struct igb_adapter *adapter, int size, - int vfn) -{ - struct e1000_hw *hw = &adapter->hw; - u32 vmolr; - - vmolr = rd32(E1000_VMOLR(vfn)); - vmolr &= ~E1000_VMOLR_RLPML_MASK; - vmolr |= size | E1000_VMOLR_LPE; - wr32(E1000_VMOLR(vfn), vmolr); - - return 0; -} - -static inline void igb_set_rah_pool(struct e1000_hw *hw, int pool, int entry) -{ - u32 reg_data; - - reg_data = rd32(E1000_RAH(entry)); - reg_data &= ~E1000_RAH_POOL_MASK; - reg_data |= E1000_RAH_POOL_1 << pool;; - wr32(E1000_RAH(entry), reg_data); -} - static void igb_set_mc_list_pools(struct igb_adapter *adapter, int entry_count, u16 total_rar_filters) { -- cgit v1.2.3 From 96577c43827697ca1af5982fa256a34786d0c720 Mon Sep 17 00:00:00 2001 From: dingdinghua Date: Mon, 13 Jul 2009 17:55:35 -0400 Subject: jbd2: fix race between write_metadata_buffer and get_write_access The function jbd2_journal_write_metadata_buffer() calls jbd_unlock_bh_state(bh_in) too early; this could potentially allow another thread to call get_write_access on the buffer head, modify the data, and dirty it, and allowing the wrong data to be written into the journal. Fortunately, if we lose this race, the only time this will actually cause filesystem corruption is if there is a system crash or other unclean shutdown of the system before the next commit can take place. Signed-off-by: dingdinghua Signed-off-by: "Theodore Ts'o" --- fs/jbd2/journal.c | 20 +++++++++++--------- 1 file changed, 11 insertions(+), 9 deletions(-) diff --git a/fs/jbd2/journal.c b/fs/jbd2/journal.c index 7b545c3b394..e378cb38397 100644 --- a/fs/jbd2/journal.c +++ b/fs/jbd2/journal.c @@ -297,6 +297,7 @@ int jbd2_journal_write_metadata_buffer(transaction_t *transaction, unsigned int new_offset; struct buffer_head *bh_in = jh2bh(jh_in); struct jbd2_buffer_trigger_type *triggers; + journal_t *journal = transaction->t_journal; /* * The buffer really shouldn't be locked: only the current committing @@ -310,6 +311,11 @@ int jbd2_journal_write_metadata_buffer(transaction_t *transaction, J_ASSERT_BH(bh_in, buffer_jbddirty(bh_in)); new_bh = alloc_buffer_head(GFP_NOFS|__GFP_NOFAIL); + /* keep subsequent assertions sane */ + new_bh->b_state = 0; + init_buffer(new_bh, NULL, NULL); + atomic_set(&new_bh->b_count, 1); + new_jh = jbd2_journal_add_journal_head(new_bh); /* This sleeps */ /* * If a new transaction has already done a buffer copy-out, then @@ -388,14 +394,6 @@ repeat: kunmap_atomic(mapped_data, KM_USER0); } - /* keep subsequent assertions sane */ - new_bh->b_state = 0; - init_buffer(new_bh, NULL, NULL); - atomic_set(&new_bh->b_count, 1); - jbd_unlock_bh_state(bh_in); - - new_jh = jbd2_journal_add_journal_head(new_bh); /* This sleeps */ - set_bh_page(new_bh, new_page, new_offset); new_jh->b_transaction = NULL; new_bh->b_size = jh2bh(jh_in)->b_size; @@ -412,7 +410,11 @@ repeat: * copying is moved to the transaction's shadow queue. */ JBUFFER_TRACE(jh_in, "file as BJ_Shadow"); - jbd2_journal_file_buffer(jh_in, transaction, BJ_Shadow); + spin_lock(&journal->j_list_lock); + __jbd2_journal_file_buffer(jh_in, transaction, BJ_Shadow); + spin_unlock(&journal->j_list_lock); + jbd_unlock_bh_state(bh_in); + JBUFFER_TRACE(new_jh, "file as BJ_IO"); jbd2_journal_file_buffer(new_jh, transaction, BJ_IO); -- cgit v1.2.3 From 6847e154e3cd74fca6084124c097980a7634285a Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Mon, 13 Jul 2009 18:18:52 -0700 Subject: Linux 2.6.31-rc3 --- Makefile | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/Makefile b/Makefile index bbe8453baa7..be0abacd042 100644 --- a/Makefile +++ b/Makefile @@ -1,7 +1,7 @@ VERSION = 2 PATCHLEVEL = 6 SUBLEVEL = 31 -EXTRAVERSION = -rc2 +EXTRAVERSION = -rc3 NAME = Man-Eating Seals of Antiquity # *DOCUMENTATION* -- cgit v1.2.3 From 4fed598a49c014cbc563179b25f2a4b8565e2a50 Mon Sep 17 00:00:00 2001 From: Ryusuke Konishi Date: Sun, 12 Jul 2009 11:13:55 +0900 Subject: fs/Kconfig: move nilfs2 out fs/Kconfig file was split into individual fs/*/Kconfig files before nilfs was merged. I've found the current config entry of nilfs is tainting the work. Sorry, I didn't notice. This fixes the violation. Signed-off-by: Ryusuke Konishi Cc: Alexey Dobriyan --- fs/Kconfig | 27 +-------------------------- fs/nilfs2/Kconfig | 25 +++++++++++++++++++++++++ 2 files changed, 26 insertions(+), 26 deletions(-) create mode 100644 fs/nilfs2/Kconfig diff --git a/fs/Kconfig b/fs/Kconfig index a97263be6a9..0e7da7bb5d9 100644 --- a/fs/Kconfig +++ b/fs/Kconfig @@ -186,32 +186,7 @@ source "fs/romfs/Kconfig" source "fs/sysv/Kconfig" source "fs/ufs/Kconfig" source "fs/exofs/Kconfig" - -config NILFS2_FS - tristate "NILFS2 file system support (EXPERIMENTAL)" - depends on BLOCK && EXPERIMENTAL - select CRC32 - help - NILFS2 is a log-structured file system (LFS) supporting continuous - snapshotting. In addition to versioning capability of the entire - file system, users can even restore files mistakenly overwritten or - destroyed just a few seconds ago. Since this file system can keep - consistency like conventional LFS, it achieves quick recovery after - system crashes. - - NILFS2 creates a number of checkpoints every few seconds or per - synchronous write basis (unless there is no change). Users can - select significant versions among continuously created checkpoints, - and can change them into snapshots which will be preserved for long - periods until they are changed back to checkpoints. Each - snapshot is mountable as a read-only file system concurrently with - its writable mount, and this feature is convenient for online backup. - - Some features including atime, extended attributes, and POSIX ACLs, - are not supported yet. - - To compile this file system support as a module, choose M here: the - module will be called nilfs2. If unsure, say N. +source "fs/nilfs2/Kconfig" endif # MISC_FILESYSTEMS diff --git a/fs/nilfs2/Kconfig b/fs/nilfs2/Kconfig new file mode 100644 index 00000000000..72da095d400 --- /dev/null +++ b/fs/nilfs2/Kconfig @@ -0,0 +1,25 @@ +config NILFS2_FS + tristate "NILFS2 file system support (EXPERIMENTAL)" + depends on BLOCK && EXPERIMENTAL + select CRC32 + help + NILFS2 is a log-structured file system (LFS) supporting continuous + snapshotting. In addition to versioning capability of the entire + file system, users can even restore files mistakenly overwritten or + destroyed just a few seconds ago. Since this file system can keep + consistency like conventional LFS, it achieves quick recovery after + system crashes. + + NILFS2 creates a number of checkpoints every few seconds or per + synchronous write basis (unless there is no change). Users can + select significant versions among continuously created checkpoints, + and can change them into snapshots which will be preserved for long + periods until they are changed back to checkpoints. Each + snapshot is mountable as a read-only file system concurrently with + its writable mount, and this feature is convenient for online backup. + + Some features including atime, extended attributes, and POSIX ACLs, + are not supported yet. + + To compile this file system support as a module, choose M here: the + module will be called nilfs2. If unsure, say N. -- cgit v1.2.3 From f936601471d1454dacbd3b2a961fd4d883090aeb Mon Sep 17 00:00:00 2001 From: Daniel Mack Date: Mon, 13 Jul 2009 22:22:49 -0700 Subject: Input: fix EVIOCGNAME/JSIOCGNAME regression Commit 3d5cb60e ("Input: simplify name handling for certain input handles") introduced a regression for the EVIOCGNAME/JSIOCGNAME ioctl. Before this, patch, the platform device's name was given back to userspace which was good to identify devices. After this patch, the device is ("event%d", minor) which is not descriptive at all. This fixes the behaviour by taking dev->name. Reported-by: Sven Neumann Signed-off-by: Daniel Mack Reviewed-by: Thadeu Lima de Souza Cascardo Signed-off-by: Dmitry Torokhov --- drivers/input/evdev.c | 3 +-- drivers/input/joydev.c | 2 +- 2 files changed, 2 insertions(+), 3 deletions(-) diff --git a/drivers/input/evdev.c b/drivers/input/evdev.c index 114efd8dc8f..1148140d08a 100644 --- a/drivers/input/evdev.c +++ b/drivers/input/evdev.c @@ -608,8 +608,7 @@ static long evdev_do_ioctl(struct file *file, unsigned int cmd, p, compat_mode); if (_IOC_NR(cmd) == _IOC_NR(EVIOCGNAME(0))) - return str_to_user(dev_name(&evdev->dev), - _IOC_SIZE(cmd), p); + return str_to_user(dev->name, _IOC_SIZE(cmd), p); if (_IOC_NR(cmd) == _IOC_NR(EVIOCGPHYS(0))) return str_to_user(dev->phys, _IOC_SIZE(cmd), p); diff --git a/drivers/input/joydev.c b/drivers/input/joydev.c index 0e12f89276a..4cfd084fa89 100644 --- a/drivers/input/joydev.c +++ b/drivers/input/joydev.c @@ -536,7 +536,7 @@ static int joydev_ioctl_common(struct joydev *joydev, default: if ((cmd & ~IOCSIZE_MASK) == JSIOCGNAME(0)) { int len; - const char *name = dev_name(&dev->dev); + const char *name = dev->name; if (!name) return 0; -- cgit v1.2.3 From 2ad76643ff58bb8841f391ea8327c14abe273ea3 Mon Sep 17 00:00:00 2001 From: Dave Jones Date: Mon, 13 Jul 2009 16:14:37 -0400 Subject: x86: Fix warning in pvclock.c when building 32-bit, I see this .. arch/x86/kernel/pvclock.c:63:7: warning: "__x86_64__" is not defined Signed-off-by: Dave Jones LKML-Reference: <20090713201437.GA12165@redhat.com> Signed-off-by: Thomas Gleixner --- arch/x86/kernel/pvclock.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/x86/kernel/pvclock.c b/arch/x86/kernel/pvclock.c index 4f9c55f3a7c..03801f2f761 100644 --- a/arch/x86/kernel/pvclock.c +++ b/arch/x86/kernel/pvclock.c @@ -60,7 +60,7 @@ static inline u64 scale_delta(u64 delta, u32 mul_frac, int shift) "adc %5,%%edx ; " : "=A" (product), "=r" (tmp1), "=r" (tmp2) : "a" ((u32)delta), "1" ((u32)(delta >> 32)), "2" (mul_frac) ); -#elif __x86_64__ +#elif defined(__x86_64__) __asm__ ( "mul %%rdx ; shrd $32,%%rdx,%%rax" : "=a" (product) : "0" (delta), "d" ((u64)mul_frac) ); -- cgit v1.2.3 From ee686ca919193d7c1f87f907e732df5e2f942523 Mon Sep 17 00:00:00 2001 From: Andreas Jaggi Date: Tue, 14 Jul 2009 09:35:59 -0700 Subject: gre: fix ToS/DiffServ inherit bug Fixes two bugs: - ToS/DiffServ inheritance was unintentionally activated when using impair fixed ToS values - ECN bit was lost during ToS/DiffServ inheritance Signed-off-by: Andreas Jaggi Signed-off-by: David S. Miller --- net/ipv4/ip_gre.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/net/ipv4/ip_gre.c b/net/ipv4/ip_gre.c index 44e2a3d2359..cb4a0f4bd5e 100644 --- a/net/ipv4/ip_gre.c +++ b/net/ipv4/ip_gre.c @@ -735,10 +735,10 @@ static int ipgre_tunnel_xmit(struct sk_buff *skb, struct net_device *dev) } tos = tiph->tos; - if (tos&1) { + if (tos == 1) { + tos = 0; if (skb->protocol == htons(ETH_P_IP)) tos = old_iph->tos; - tos &= ~1; } { -- cgit v1.2.3 From a89d63a159b1ba5833be2bef00adf8ad8caac8be Mon Sep 17 00:00:00 2001 From: Casey Dahlin Date: Tue, 14 Jul 2009 12:17:51 -0500 Subject: dlm: free socket in error exit path In the tcp_connect_to_sock() error exit path, the socket allocated at the top of the function was not being freed. Signed-off-by: Casey Dahlin Signed-off-by: David Teigland --- fs/dlm/lowcomms.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/fs/dlm/lowcomms.c b/fs/dlm/lowcomms.c index cdb580a9c7a..618a60f0388 100644 --- a/fs/dlm/lowcomms.c +++ b/fs/dlm/lowcomms.c @@ -902,7 +902,7 @@ static void tcp_connect_to_sock(struct connection *con) int result = -EHOSTUNREACH; struct sockaddr_storage saddr, src_addr; int addr_len; - struct socket *sock; + struct socket *sock = NULL; if (con->nodeid == 0) { log_print("attempt to connect sock 0 foiled"); @@ -962,6 +962,8 @@ out_err: if (con->sock) { sock_release(con->sock); con->sock = NULL; + } else if (sock) { + sock_release(sock); } /* * Some errors are fatal and this list might need adjusting. For other -- cgit v1.2.3 From bc23283c7bc90958927abe26eedc562701743a88 Mon Sep 17 00:00:00 2001 From: Jiri Slaby Date: Mon, 13 Jul 2009 11:23:39 +0000 Subject: NET: phy_device, fix lock imbalance Don't forget to unlock a mutex in phy_scan_fixups on a fail path. Signed-off-by: Jiri Slaby Signed-off-by: David S. Miller --- drivers/net/phy/phy_device.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/drivers/net/phy/phy_device.c b/drivers/net/phy/phy_device.c index eba937c4637..b10fedd8214 100644 --- a/drivers/net/phy/phy_device.c +++ b/drivers/net/phy/phy_device.c @@ -134,8 +134,10 @@ int phy_scan_fixups(struct phy_device *phydev) err = fixup->run(phydev); - if (err < 0) + if (err < 0) { + mutex_unlock(&phy_fixup_lock); return err; + } } } mutex_unlock(&phy_fixup_lock); -- cgit v1.2.3 From 79fbe134832ebb70a49d8802cfeb2401dc35bb38 Mon Sep 17 00:00:00 2001 From: Dongdong Deng Date: Sun, 12 Jul 2009 20:27:06 +0000 Subject: drivers/net: using spin_lock_irqsave() in net_send_packet() spin_unlock_irq() will enable interrupt in net_send_packet(), this patch changes it to spin_lock_irqsave/spin_lock_irqrestore, so that it doesn't enable interrupts when already disabled, and netconsole would work properly over cs89x0/isa-skeleton. Call trace: netconsole write_msg() { ... -> spin_lock_irqsave(); -> netpoll_send_udp() -> netpoll_send_skb() -> net_send_packet() ->... -> spin_unlock_irqrestore(); ... } Signed-off-by: Dongdong Deng Signed-off-by: David S. Miller --- drivers/net/cs89x0.c | 7 ++++--- drivers/net/isa-skeleton.c | 5 +++-- 2 files changed, 7 insertions(+), 5 deletions(-) diff --git a/drivers/net/cs89x0.c b/drivers/net/cs89x0.c index 3eee666a9cd..55445f980f9 100644 --- a/drivers/net/cs89x0.c +++ b/drivers/net/cs89x0.c @@ -1524,6 +1524,7 @@ static void net_timeout(struct net_device *dev) static int net_send_packet(struct sk_buff *skb, struct net_device *dev) { struct net_local *lp = netdev_priv(dev); + unsigned long flags; if (net_debug > 3) { printk("%s: sent %d byte packet of type %x\n", @@ -1535,7 +1536,7 @@ static int net_send_packet(struct sk_buff *skb, struct net_device *dev) ask the chip to start transmitting before the whole packet has been completely uploaded. */ - spin_lock_irq(&lp->lock); + spin_lock_irqsave(&lp->lock, flags); netif_stop_queue(dev); /* initiate a transmit sequence */ @@ -1549,13 +1550,13 @@ static int net_send_packet(struct sk_buff *skb, struct net_device *dev) * we're waiting for TxOk, so return 1 and requeue this packet. */ - spin_unlock_irq(&lp->lock); + spin_unlock_irqrestore(&lp->lock, flags); if (net_debug) printk("cs89x0: Tx buffer not free!\n"); return NETDEV_TX_BUSY; } /* Write the contents of the packet */ writewords(dev->base_addr, TX_FRAME_PORT,skb->data,(skb->len+1) >>1); - spin_unlock_irq(&lp->lock); + spin_unlock_irqrestore(&lp->lock, flags); lp->stats.tx_bytes += skb->len; dev->trans_start = jiffies; dev_kfree_skb (skb); diff --git a/drivers/net/isa-skeleton.c b/drivers/net/isa-skeleton.c index 73585fd8f29..d12377b8435 100644 --- a/drivers/net/isa-skeleton.c +++ b/drivers/net/isa-skeleton.c @@ -430,7 +430,8 @@ static int net_send_packet(struct sk_buff *skb, struct net_device *dev) * hardware interrupt handler. Queue flow control is * thus managed under this lock as well. */ - spin_lock_irq(&np->lock); + unsigned long flags; + spin_lock_irqsave(&np->lock, flags); add_to_tx_ring(np, skb, length); dev->trans_start = jiffies; @@ -446,7 +447,7 @@ static int net_send_packet(struct sk_buff *skb, struct net_device *dev) * is when the transmit statistics are updated. */ - spin_unlock_irq(&np->lock); + spin_unlock_irqrestore(&np->lock, flags); #else /* This is the case for older hardware which takes * a single transmit buffer at a time, and it is -- cgit v1.2.3 From 8660c1240ec6016522b882c88751cb4ce40bf0e8 Mon Sep 17 00:00:00 2001 From: Tobias Klauser Date: Mon, 13 Jul 2009 22:48:16 +0000 Subject: skbuff.h: Fix comment for NET_IP_ALIGN Use the correct function call for skb_reserve in the comment for NET_IP_ALIGN. Signed-off-by: Tobias Klauser Signed-off-by: David S. Miller --- include/linux/skbuff.h | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/include/linux/skbuff.h b/include/linux/skbuff.h index b47b3f039d1..f2c69a2cca1 100644 --- a/include/linux/skbuff.h +++ b/include/linux/skbuff.h @@ -1342,12 +1342,12 @@ static inline int skb_network_offset(const struct sk_buff *skb) * shifting the start of the packet by 2 bytes. Drivers should do this * with: * - * skb_reserve(NET_IP_ALIGN); + * skb_reserve(skb, NET_IP_ALIGN); * * The downside to this alignment of the IP header is that the DMA is now * unaligned. On some architectures the cost of an unaligned DMA is high * and this cost outweighs the gains made by aligning the IP header. - * + * * Since this trade off varies between architectures, we allow NET_IP_ALIGN * to be overridden. */ -- cgit v1.2.3 From 252aa9d94a04252046f3a382e6aca1b5c95921d8 Mon Sep 17 00:00:00 2001 From: "David S. Miller" Date: Tue, 14 Jul 2009 13:13:41 -0700 Subject: Revert "NET: Fix locking issues in PPP, 6pack, mkiss and strip line disciplines." This reverts commit adeab1afb7de89555c69aab5ca21300c14af6369. As Alan Cox explained, the TTY layer changes that went recently to get rid of the tty->low_latency stuff fixes this already, and even for -stable it's the ->low_latency changes that should go in to fix this, rather than this patch. Signed-off-by: David S. Miller --- drivers/net/hamradio/6pack.c | 10 ++++------ drivers/net/hamradio/mkiss.c | 41 +++++++++++++++++------------------------ drivers/net/ppp_async.c | 11 ++++------- drivers/net/ppp_synctty.c | 11 ++++------- drivers/net/wireless/strip.c | 39 +++++++++++++++------------------------ 5 files changed, 44 insertions(+), 68 deletions(-) diff --git a/drivers/net/hamradio/6pack.c b/drivers/net/hamradio/6pack.c index 913a5640659..155160052c8 100644 --- a/drivers/net/hamradio/6pack.c +++ b/drivers/net/hamradio/6pack.c @@ -398,14 +398,13 @@ static DEFINE_RWLOCK(disc_data_lock); static struct sixpack *sp_get(struct tty_struct *tty) { - unsigned long flags; struct sixpack *sp; - read_lock_irqsave(&disc_data_lock, flags); + read_lock(&disc_data_lock); sp = tty->disc_data; if (sp) atomic_inc(&sp->refcnt); - read_unlock_irqrestore(&disc_data_lock, flags); + read_unlock(&disc_data_lock); return sp; } @@ -689,13 +688,12 @@ out: */ static void sixpack_close(struct tty_struct *tty) { - unsigned long flags; struct sixpack *sp; - write_lock_irqsave(&disc_data_lock, flags); + write_lock(&disc_data_lock); sp = tty->disc_data; tty->disc_data = NULL; - write_unlock_irqrestore(&disc_data_lock, flags); + write_unlock(&disc_data_lock); if (!sp) return; diff --git a/drivers/net/hamradio/mkiss.c b/drivers/net/hamradio/mkiss.c index a7286500c18..fda2fc83e9a 100644 --- a/drivers/net/hamradio/mkiss.c +++ b/drivers/net/hamradio/mkiss.c @@ -244,16 +244,15 @@ static int kiss_esc_crc(unsigned char *s, unsigned char *d, unsigned short crc, /* Send one completely decapsulated AX.25 packet to the AX.25 layer. */ static void ax_bump(struct mkiss *ax) { - unsigned long flags; struct sk_buff *skb; int count; - spin_lock_irqsave(&ax->buflock, flags); + spin_lock_bh(&ax->buflock); if (ax->rbuff[0] > 0x0f) { if (ax->rbuff[0] & 0x80) { if (check_crc_16(ax->rbuff, ax->rcount) < 0) { ax->dev->stats.rx_errors++; - spin_unlock_irqrestore(&ax->buflock, flags); + spin_unlock_bh(&ax->buflock); return; } @@ -268,7 +267,7 @@ static void ax_bump(struct mkiss *ax) } else if (ax->rbuff[0] & 0x20) { if (check_crc_flex(ax->rbuff, ax->rcount) < 0) { ax->dev->stats.rx_errors++; - spin_unlock_irqrestore(&ax->buflock, flags); + spin_unlock_bh(&ax->buflock); return; } if (ax->crcmode != CRC_MODE_FLEX && ax->crcauto) { @@ -295,7 +294,7 @@ static void ax_bump(struct mkiss *ax) printk(KERN_ERR "mkiss: %s: memory squeeze, dropping packet.\n", ax->dev->name); ax->dev->stats.rx_dropped++; - spin_unlock_irqrestore(&ax->buflock, flags); + spin_unlock_bh(&ax->buflock); return; } @@ -304,13 +303,11 @@ static void ax_bump(struct mkiss *ax) netif_rx(skb); ax->dev->stats.rx_packets++; ax->dev->stats.rx_bytes += count; - spin_unlock_irqrestore(&ax->buflock, flags); + spin_unlock_bh(&ax->buflock); } static void kiss_unesc(struct mkiss *ax, unsigned char s) { - unsigned long flags; - switch (s) { case END: /* drop keeptest bit = VSV */ @@ -337,18 +334,18 @@ static void kiss_unesc(struct mkiss *ax, unsigned char s) break; } - spin_lock_irqsave(&ax->buflock, flags); + spin_lock_bh(&ax->buflock); if (!test_bit(AXF_ERROR, &ax->flags)) { if (ax->rcount < ax->buffsize) { ax->rbuff[ax->rcount++] = s; - spin_unlock_irqrestore(&ax->buflock, flags); + spin_unlock_bh(&ax->buflock); return; } ax->dev->stats.rx_over_errors++; set_bit(AXF_ERROR, &ax->flags); } - spin_unlock_irqrestore(&ax->buflock, flags); + spin_unlock_bh(&ax->buflock); } static int ax_set_mac_address(struct net_device *dev, void *addr) @@ -370,7 +367,6 @@ static void ax_changedmtu(struct mkiss *ax) { struct net_device *dev = ax->dev; unsigned char *xbuff, *rbuff, *oxbuff, *orbuff; - unsigned long flags; int len; len = dev->mtu * 2; @@ -396,7 +392,7 @@ static void ax_changedmtu(struct mkiss *ax) return; } - spin_lock_irqsave(&ax->buflock, flags); + spin_lock_bh(&ax->buflock); oxbuff = ax->xbuff; ax->xbuff = xbuff; @@ -427,7 +423,7 @@ static void ax_changedmtu(struct mkiss *ax) ax->mtu = dev->mtu + 73; ax->buffsize = len; - spin_unlock_irqrestore(&ax->buflock, flags); + spin_unlock_bh(&ax->buflock); kfree(oxbuff); kfree(orbuff); @@ -437,7 +433,6 @@ static void ax_changedmtu(struct mkiss *ax) static void ax_encaps(struct net_device *dev, unsigned char *icp, int len) { struct mkiss *ax = netdev_priv(dev); - unsigned long flags; unsigned char *p; int actual, count; @@ -454,7 +449,7 @@ static void ax_encaps(struct net_device *dev, unsigned char *icp, int len) p = icp; - spin_lock_irqsave(&ax->buflock, flags); + spin_lock_bh(&ax->buflock); if ((*p & 0x0f) != 0) { /* Configuration Command (kissparms(1). * Protocol spec says: never append CRC. @@ -484,7 +479,7 @@ static void ax_encaps(struct net_device *dev, unsigned char *icp, int len) ax->crcauto = (cmd ? 0 : 1); printk(KERN_INFO "mkiss: %s: crc mode %s %d\n", ax->dev->name, (len) ? "set to" : "is", cmd); } - spin_unlock_irqrestore(&ax->buflock, flags); + spin_unlock_bh(&ax->buflock); netif_start_queue(dev); return; @@ -517,7 +512,7 @@ static void ax_encaps(struct net_device *dev, unsigned char *icp, int len) count = kiss_esc(p, (unsigned char *)ax->xbuff, len); } } - spin_unlock_irqrestore(&ax->buflock, flags); + spin_unlock_bh(&ax->buflock); set_bit(TTY_DO_WRITE_WAKEUP, &ax->tty->flags); actual = ax->tty->ops->write(ax->tty, ax->xbuff, count); @@ -709,14 +704,13 @@ static DEFINE_RWLOCK(disc_data_lock); static struct mkiss *mkiss_get(struct tty_struct *tty) { - unsigned long flags; struct mkiss *ax; - read_lock_irqsave(&disc_data_lock, flags); + read_lock(&disc_data_lock); ax = tty->disc_data; if (ax) atomic_inc(&ax->refcnt); - read_unlock_irqrestore(&disc_data_lock, flags); + read_unlock(&disc_data_lock); return ax; } @@ -815,13 +809,12 @@ out: static void mkiss_close(struct tty_struct *tty) { - unsigned long flags; struct mkiss *ax; - write_lock_irqsave(&disc_data_lock, flags); + write_lock(&disc_data_lock); ax = tty->disc_data; tty->disc_data = NULL; - write_unlock_irqrestore(&disc_data_lock, flags); + write_unlock(&disc_data_lock); if (!ax) return; diff --git a/drivers/net/ppp_async.c b/drivers/net/ppp_async.c index 1fd319bf758..17c116bb332 100644 --- a/drivers/net/ppp_async.c +++ b/drivers/net/ppp_async.c @@ -132,15 +132,13 @@ static DEFINE_RWLOCK(disc_data_lock); static struct asyncppp *ap_get(struct tty_struct *tty) { - unsigned long flags; struct asyncppp *ap; - read_lock_irqsave(&disc_data_lock, flags); + read_lock(&disc_data_lock); ap = tty->disc_data; if (ap != NULL) atomic_inc(&ap->refcnt); - read_unlock_irqrestore(&disc_data_lock, flags); - + read_unlock(&disc_data_lock); return ap; } @@ -217,13 +215,12 @@ ppp_asynctty_open(struct tty_struct *tty) static void ppp_asynctty_close(struct tty_struct *tty) { - unsigned long flags; struct asyncppp *ap; - write_lock_irqsave(&disc_data_lock, flags); + write_lock_irq(&disc_data_lock); ap = tty->disc_data; tty->disc_data = NULL; - write_unlock_irqrestore(&disc_data_lock, flags); + write_unlock_irq(&disc_data_lock); if (!ap) return; diff --git a/drivers/net/ppp_synctty.c b/drivers/net/ppp_synctty.c index 1b3f75febee..aa3d39f38e2 100644 --- a/drivers/net/ppp_synctty.c +++ b/drivers/net/ppp_synctty.c @@ -182,15 +182,13 @@ static DEFINE_RWLOCK(disc_data_lock); static struct syncppp *sp_get(struct tty_struct *tty) { - unsigned long flags; struct syncppp *ap; - read_lock_irqsave(&disc_data_lock, flags); + read_lock(&disc_data_lock); ap = tty->disc_data; if (ap != NULL) atomic_inc(&ap->refcnt); - read_unlock_irqrestore(&disc_data_lock, flags); - + read_unlock(&disc_data_lock); return ap; } @@ -264,13 +262,12 @@ ppp_sync_open(struct tty_struct *tty) static void ppp_sync_close(struct tty_struct *tty) { - unsigned long flags; struct syncppp *ap; - write_lock_irqsave(&disc_data_lock, flags); + write_lock_irq(&disc_data_lock); ap = tty->disc_data; tty->disc_data = NULL; - write_unlock_irqrestore(&disc_data_lock, flags); + write_unlock_irq(&disc_data_lock); if (!ap) return; diff --git a/drivers/net/wireless/strip.c b/drivers/net/wireless/strip.c index 3d39f6587eb..38366a56b71 100644 --- a/drivers/net/wireless/strip.c +++ b/drivers/net/wireless/strip.c @@ -856,7 +856,6 @@ static int strip_change_mtu(struct net_device *dev, int new_mtu) unsigned char *orbuff = strip_info->rx_buff; unsigned char *osbuff = strip_info->sx_buff; unsigned char *otbuff = strip_info->tx_buff; - unsigned long flags; if (new_mtu > MAX_SEND_MTU) { printk(KERN_ERR @@ -865,11 +864,11 @@ static int strip_change_mtu(struct net_device *dev, int new_mtu) return -EINVAL; } - spin_lock_irqsave(&strip_lock, flags); + spin_lock_bh(&strip_lock); if (!allocate_buffers(strip_info, new_mtu)) { printk(KERN_ERR "%s: unable to grow strip buffers, MTU change cancelled.\n", strip_info->dev->name); - spin_unlock_irqrestore(&strip_lock, flags); + spin_unlock_bh(&strip_lock); return -ENOMEM; } @@ -893,7 +892,7 @@ static int strip_change_mtu(struct net_device *dev, int new_mtu) } } strip_info->tx_head = strip_info->tx_buff; - spin_unlock_irqrestore(&strip_lock, flags); + spin_unlock_bh(&strip_lock); printk(KERN_NOTICE "%s: strip MTU changed fom %d to %d.\n", strip_info->dev->name, old_mtu, strip_info->mtu); @@ -984,13 +983,10 @@ static void strip_seq_neighbours(struct seq_file *seq, const MetricomNodeTable * table, const char *title) { - unsigned long flags; + /* We wrap this in a do/while loop, so if the table changes */ + /* while we're reading it, we just go around and try again. */ struct timeval t; - /* - * We wrap this in a do/while loop, so if the table changes - * while we're reading it, we just go around and try again. - */ do { int i; t = table->timestamp; @@ -999,9 +995,9 @@ static void strip_seq_neighbours(struct seq_file *seq, for (i = 0; i < table->num_nodes; i++) { MetricomNode node; - spin_lock_irqsave(&strip_lock, flags); + spin_lock_bh(&strip_lock); node = table->node[i]; - spin_unlock_irqrestore(&strip_lock, flags); + spin_unlock_bh(&strip_lock); seq_printf(seq, " %s\n", node.c); } } while (table->timestamp.tv_sec != t.tv_sec @@ -1540,7 +1536,6 @@ static void strip_send(struct strip *strip_info, struct sk_buff *skb) static int strip_xmit(struct sk_buff *skb, struct net_device *dev) { struct strip *strip_info = netdev_priv(dev); - unsigned long flags; if (!netif_running(dev)) { printk(KERN_ERR "%s: xmit call when iface is down\n", @@ -1579,11 +1574,11 @@ static int strip_xmit(struct sk_buff *skb, struct net_device *dev) strip_info->dev->name, sx_pps_count / 8); } - spin_lock_irqsave(&strip_lock, flags); + spin_lock_bh(&strip_lock); strip_send(strip_info, skb); - spin_unlock_irqrestore(&strip_lock, flags); + spin_unlock_bh(&strip_lock); if (skb) dev_kfree_skb(skb); @@ -2268,13 +2263,12 @@ static void strip_receive_buf(struct tty_struct *tty, const unsigned char *cp, { struct strip *strip_info = tty->disc_data; const unsigned char *end = cp + count; - unsigned long flags; if (!strip_info || strip_info->magic != STRIP_MAGIC || !netif_running(strip_info->dev)) return; - spin_lock_irqsave(&strip_lock, flags); + spin_lock_bh(&strip_lock); #if 0 { struct timeval tv; @@ -2341,7 +2335,7 @@ static void strip_receive_buf(struct tty_struct *tty, const unsigned char *cp, } cp++; } - spin_unlock_irqrestore(&strip_lock, flags); + spin_unlock_bh(&strip_lock); } @@ -2529,11 +2523,9 @@ static void strip_dev_setup(struct net_device *dev) static void strip_free(struct strip *strip_info) { - unsigned long flags; - - spin_lock_irqsave(&strip_lock, flags); + spin_lock_bh(&strip_lock); list_del_rcu(&strip_info->list); - spin_unlock_irqrestore(&strip_lock, flags); + spin_unlock_bh(&strip_lock); strip_info->magic = 0; @@ -2547,7 +2539,6 @@ static void strip_free(struct strip *strip_info) static struct strip *strip_alloc(void) { struct list_head *n; - unsigned long flags; struct net_device *dev; struct strip *strip_info; @@ -2571,7 +2562,7 @@ static struct strip *strip_alloc(void) strip_info->idle_timer.function = strip_IdleTask; - spin_lock_irqsave(&strip_lock, flags); + spin_lock_bh(&strip_lock); rescan: /* * Search the list to find where to put our new entry @@ -2590,7 +2581,7 @@ static struct strip *strip_alloc(void) sprintf(dev->name, "st%ld", dev->base_addr); list_add_tail_rcu(&strip_info->list, &strip_list); - spin_unlock_irqrestore(&strip_lock, flags); + spin_unlock_bh(&strip_lock); return strip_info; } -- cgit v1.2.3 From a17d1720aa35623a9bef3707b36242706714bca5 Mon Sep 17 00:00:00 2001 From: Abhishek Kulkarni Date: Tue, 14 Jul 2009 13:24:10 -0500 Subject: 9p: default 9p transport module fix The default 9p transport module is not chosen unless an option parameter (any) is passed to mount, which thus returns a ENOPROTOSUPPORT. This fix moves the check out of parse_opts into p9_client_create. Signed-off-by: Abhishek Kulkarni Signed-off-by: Eric Van Hensbergen --- net/9p/client.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/net/9p/client.c b/net/9p/client.c index dd43a8289b0..783a4107740 100644 --- a/net/9p/client.c +++ b/net/9p/client.c @@ -117,9 +117,6 @@ static int parse_opts(char *opts, struct p9_client *clnt) } } - if (!clnt->trans_mod) - clnt->trans_mod = v9fs_get_default_trans(); - kfree(options); return ret; } @@ -689,6 +686,9 @@ struct p9_client *p9_client_create(const char *dev_name, char *options) if (err < 0) goto error; + if (!clnt->trans_mod) + clnt->trans_mod = v9fs_get_default_trans(); + if (clnt->trans_mod == NULL) { err = -EPROTONOSUPPORT; P9_DPRINTK(P9_DEBUG_ERROR, -- cgit v1.2.3 From eedfe1c4289216af5a0a7f38e6b2c4d3f07c087f Mon Sep 17 00:00:00 2001 From: Abhishek Kulkarni Date: Tue, 14 Jul 2009 13:25:41 -0500 Subject: 9p: Possible regression in p9_client_stat Fix a possible regression with p9_client_stat where it can try to kfree an ERR_PTR after an erroneous p9pdu_readf. Also remove an unnecessary data buffer increment in p9_client_read. Signed-off-by: Abhishek Kulkarni Signed-off-by: Eric Van Hensbergen --- net/9p/client.c | 7 ++----- 1 file changed, 2 insertions(+), 5 deletions(-) diff --git a/net/9p/client.c b/net/9p/client.c index 783a4107740..787ccddb85e 100644 --- a/net/9p/client.c +++ b/net/9p/client.c @@ -1098,7 +1098,6 @@ p9_client_read(struct p9_fid *fid, char *data, char __user *udata, u64 offset, if (data) { memmove(data, dataptr, count); - data += count; } if (udata) { @@ -1192,9 +1191,9 @@ struct p9_wstat *p9_client_stat(struct p9_fid *fid) err = p9pdu_readf(req->rc, clnt->dotu, "wS", &ignored, ret); if (err) { - ret = ERR_PTR(err); p9pdu_dump(1, req->rc); - goto free_and_error; + p9_free_req(clnt, req); + goto error; } P9_DPRINTK(P9_DEBUG_9P, @@ -1211,8 +1210,6 @@ struct p9_wstat *p9_client_stat(struct p9_fid *fid) p9_free_req(clnt, req); return ret; -free_and_error: - p9_free_req(clnt, req); error: kfree(ret); return ERR_PTR(err); -- cgit v1.2.3 From 9c9ad6162e2aa1e528ed687ccab87fe681ebbef1 Mon Sep 17 00:00:00 2001 From: Abhishek Kulkarni Date: Tue, 14 Jul 2009 13:26:52 -0500 Subject: 9p: Fix incorrect parameters to v9fs_file_readn. Fix v9fs_vfs_readpage. The offset and size parameters to v9fs_file_readn were interchanged and hence passed incorrectly. Signed-off-by: Abhishek Kulkarni Signed-off-by: Eric Van Hensbergen --- fs/9p/vfs_addr.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/fs/9p/vfs_addr.c b/fs/9p/vfs_addr.c index 6fcb1e7095c..92828281a30 100644 --- a/fs/9p/vfs_addr.c +++ b/fs/9p/vfs_addr.c @@ -57,7 +57,7 @@ static int v9fs_vfs_readpage(struct file *filp, struct page *page) buffer = kmap(page); offset = page_offset(page); - retval = v9fs_file_readn(filp, buffer, NULL, offset, PAGE_CACHE_SIZE); + retval = v9fs_file_readn(filp, buffer, NULL, PAGE_CACHE_SIZE, offset); if (retval < 0) goto done; -- cgit v1.2.3 From e164ddeeb82920c5b1470b6585767a000c8b0e45 Mon Sep 17 00:00:00 2001 From: Kevin Hilman Date: Mon, 6 Jul 2009 15:48:35 -0700 Subject: i2c-davinci: convert clock usage after clkdev conversion DaVinci core code has converted to the new clkdev API so clock name strings are not needed. Instead, just the a 'struct device' pointer is needed. Signed-off-by: Kevin Hilman Signed-off-by: Ben Dooks --- drivers/i2c/busses/i2c-davinci.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/i2c/busses/i2c-davinci.c b/drivers/i2c/busses/i2c-davinci.c index 3fae3a91ce5..ee3fbb8585f 100644 --- a/drivers/i2c/busses/i2c-davinci.c +++ b/drivers/i2c/busses/i2c-davinci.c @@ -523,7 +523,7 @@ static int davinci_i2c_probe(struct platform_device *pdev) dev->irq = irq->start; platform_set_drvdata(pdev, dev); - dev->clk = clk_get(&pdev->dev, "I2CCLK"); + dev->clk = clk_get(&pdev->dev, NULL); if (IS_ERR(dev->clk)) { r = -ENODEV; goto err_free_mem; -- cgit v1.2.3 From 7605fa3b0aedbb6c77471517ba16753f276156d9 Mon Sep 17 00:00:00 2001 From: David Brownell Date: Mon, 6 Jul 2009 15:48:36 -0700 Subject: i2c-davinci: behave with i2cdetect Make i2c-davinci cope properly with "i2cdetect": don't spew syslog spam on perfectly normal behaviors, or respond to any address other than the one reserved for the SMBus host. Signed-off-by: David Brownell Signed-off-by: Kevin Hilman Signed-off-by: Ben Dooks --- drivers/i2c/busses/i2c-davinci.c | 18 ++++++++++++++---- 1 file changed, 14 insertions(+), 4 deletions(-) diff --git a/drivers/i2c/busses/i2c-davinci.c b/drivers/i2c/busses/i2c-davinci.c index ee3fbb8585f..1f3d89c3194 100644 --- a/drivers/i2c/busses/i2c-davinci.c +++ b/drivers/i2c/busses/i2c-davinci.c @@ -187,6 +187,11 @@ static int i2c_davinci_init(struct davinci_i2c_dev *dev) davinci_i2c_write_reg(dev, DAVINCI_I2C_CLKH_REG, clkh); davinci_i2c_write_reg(dev, DAVINCI_I2C_CLKL_REG, clkl); + /* Respond at reserved "SMBus Host" slave address" (and zero); + * we seem to have no option to not respond... + */ + davinci_i2c_write_reg(dev, DAVINCI_I2C_OAR_REG, 0x08); + dev_dbg(dev->dev, "input_clock = %d, CLK = %d\n", input_clock, clk); dev_dbg(dev->dev, "PSC = %d\n", davinci_i2c_read_reg(dev, DAVINCI_I2C_PSC_REG)); @@ -387,7 +392,7 @@ static void terminate_write(struct davinci_i2c_dev *dev) davinci_i2c_write_reg(dev, DAVINCI_I2C_MDR_REG, w); if (!dev->terminate) - dev_err(dev->dev, "TDR IRQ while no data to send\n"); + dev_dbg(dev->dev, "TDR IRQ while no data to send\n"); } /* @@ -473,9 +478,14 @@ static irqreturn_t i2c_davinci_isr(int this_irq, void *dev_id) break; case DAVINCI_I2C_IVR_AAS: - dev_warn(dev->dev, "Address as slave interrupt\n"); - }/* switch */ - }/* while */ + dev_dbg(dev->dev, "Address as slave interrupt\n"); + break; + + default: + dev_warn(dev->dev, "Unrecognized irq stat %d\n", stat); + break; + } + } return count ? IRQ_HANDLED : IRQ_NONE; } -- cgit v1.2.3 From 593308259bbd335eda9c5280cdd1f7883c746211 Mon Sep 17 00:00:00 2001 From: Julia Lawall Date: Sun, 5 Jul 2009 08:37:50 +0200 Subject: i2c: Use resource_size Use the function resource_size, which reduces the chance of introducing off-by-one errors in calculating the resource size. The semantic patch that makes this change is as follows: (http://www.emn.fr/x-info/coccinelle/) // @@ struct resource *res; @@ - (res->end - res->start) + 1 + resource_size(res) // Signed-off-by: Julia Lawall Signed-off-by: Ben Dooks --- drivers/i2c/busses/i2c-davinci.c | 6 +++--- drivers/i2c/busses/i2c-omap.c | 6 +++--- drivers/i2c/busses/i2c-sh_mobile.c | 2 +- drivers/i2c/busses/i2c-simtec.c | 2 +- 4 files changed, 8 insertions(+), 8 deletions(-) diff --git a/drivers/i2c/busses/i2c-davinci.c b/drivers/i2c/busses/i2c-davinci.c index 1f3d89c3194..c89687a1083 100644 --- a/drivers/i2c/busses/i2c-davinci.c +++ b/drivers/i2c/busses/i2c-davinci.c @@ -515,7 +515,7 @@ static int davinci_i2c_probe(struct platform_device *pdev) return -ENODEV; } - ioarea = request_mem_region(mem->start, (mem->end - mem->start) + 1, + ioarea = request_mem_region(mem->start, resource_size(mem), pdev->name); if (!ioarea) { dev_err(&pdev->dev, "I2C region already claimed\n"); @@ -578,7 +578,7 @@ err_free_mem: put_device(&pdev->dev); kfree(dev); err_release_region: - release_mem_region(mem->start, (mem->end - mem->start) + 1); + release_mem_region(mem->start, resource_size(mem)); return r; } @@ -601,7 +601,7 @@ static int davinci_i2c_remove(struct platform_device *pdev) kfree(dev); mem = platform_get_resource(pdev, IORESOURCE_MEM, 0); - release_mem_region(mem->start, (mem->end - mem->start) + 1); + release_mem_region(mem->start, resource_size(mem)); return 0; } diff --git a/drivers/i2c/busses/i2c-omap.c b/drivers/i2c/busses/i2c-omap.c index ad8d2010c92..fdd83277c8a 100644 --- a/drivers/i2c/busses/i2c-omap.c +++ b/drivers/i2c/busses/i2c-omap.c @@ -806,7 +806,7 @@ omap_i2c_probe(struct platform_device *pdev) return -ENODEV; } - ioarea = request_mem_region(mem->start, (mem->end - mem->start) + 1, + ioarea = request_mem_region(mem->start, resource_size(mem), pdev->name); if (!ioarea) { dev_err(&pdev->dev, "I2C region already claimed\n"); @@ -905,7 +905,7 @@ err_free_mem: platform_set_drvdata(pdev, NULL); kfree(dev); err_release_region: - release_mem_region(mem->start, (mem->end - mem->start) + 1); + release_mem_region(mem->start, resource_size(mem)); return r; } @@ -925,7 +925,7 @@ omap_i2c_remove(struct platform_device *pdev) iounmap(dev->base); kfree(dev); mem = platform_get_resource(pdev, IORESOURCE_MEM, 0); - release_mem_region(mem->start, (mem->end - mem->start) + 1); + release_mem_region(mem->start, resource_size(mem)); return 0; } diff --git a/drivers/i2c/busses/i2c-sh_mobile.c b/drivers/i2c/busses/i2c-sh_mobile.c index 1c01083b01b..4f3d99cd169 100644 --- a/drivers/i2c/busses/i2c-sh_mobile.c +++ b/drivers/i2c/busses/i2c-sh_mobile.c @@ -563,7 +563,7 @@ static int sh_mobile_i2c_probe(struct platform_device *dev) goto err_irq; } - size = (res->end - res->start) + 1; + size = resource_size(res); pd->reg = ioremap(res->start, size); if (pd->reg == NULL) { diff --git a/drivers/i2c/busses/i2c-simtec.c b/drivers/i2c/busses/i2c-simtec.c index 042fda295f3..6407f47bda8 100644 --- a/drivers/i2c/busses/i2c-simtec.c +++ b/drivers/i2c/busses/i2c-simtec.c @@ -92,7 +92,7 @@ static int simtec_i2c_probe(struct platform_device *dev) goto err; } - size = (res->end-res->start)+1; + size = resource_size(res); pd->ioarea = request_mem_region(res->start, size, dev->name); if (pd->ioarea == NULL) { -- cgit v1.2.3 From c9d4bc289cd1cd43c3cff97b73efe2b0b5098a92 Mon Sep 17 00:00:00 2001 From: Zhaolei Date: Tue, 14 Jul 2009 17:59:05 +0800 Subject: z2ram: Small cleanup for z2ram.c We should use Z2MINOR_COUNT as range argument in blk_unregister_region() Signed-off-by: Zhao Lei Signed-off-by: Tejun Heo --- drivers/block/z2ram.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/block/z2ram.c b/drivers/block/z2ram.c index 4575171e5be..b2590409f25 100644 --- a/drivers/block/z2ram.c +++ b/drivers/block/z2ram.c @@ -374,7 +374,7 @@ err: static void __exit z2_exit(void) { int i, j; - blk_unregister_region(MKDEV(Z2RAM_MAJOR, 0), 256); + blk_unregister_region(MKDEV(Z2RAM_MAJOR, 0), Z2MINOR_COUNT); unregister_blkdev(Z2RAM_MAJOR, DEVICE_NAME); del_gendisk(z2ram_gendisk); put_disk(z2ram_gendisk); -- cgit v1.2.3 From fe2c4d018fc6127610fef677e020b3bb41cfaaaf Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Wed, 8 Jul 2009 12:16:37 +0900 Subject: libata: fix follow-up SRST failure path ata_eh_reset() was missing error return handling after follow-up SRST allowing EH to continue the normal probing path after reset failure. This was discovered while testing new WD 2TB drives which take longer than 10 secs to spin up and cause the first follow-up SRST to time out. Signed-off-by: Tejun Heo Signed-off-by: Jeff Garzik --- drivers/ata/libata-eh.c | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/drivers/ata/libata-eh.c b/drivers/ata/libata-eh.c index fa22f94ca41..1a07c061f64 100644 --- a/drivers/ata/libata-eh.c +++ b/drivers/ata/libata-eh.c @@ -2517,6 +2517,10 @@ int ata_eh_reset(struct ata_link *link, int classify, ata_eh_about_to_do(link, NULL, ATA_EH_RESET); rc = ata_do_reset(link, reset, classes, deadline, true); + if (rc) { + failed_link = link; + goto fail; + } } } else { if (verbose) -- cgit v1.2.3 From d0cb43b35d64877b2944bd37719708be5d7bbf99 Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Thu, 9 Jul 2009 09:27:50 +0900 Subject: libata: implement and use HORKAGE_NOSETXFER, take#2 PIONEER DVD-RW DVRTD08 times out SETXFER if no media is present. The device is SATA and simply skipping SETXFER works around the problem. Implement ATA_HORKAGE_NOSETXFER and apply it to the device. Reported by Moritz Rigler in the following thread. http://thread.gmane.org/gmane.linux.ide/36790 and by Lars in bko#9540. Updated to whine and ignore NOSETXFER if PATA component is detected as suggested by Alan Cox. Signed-off-by: Tejun Heo Reported-by: Moritz Rigler Reported-by: Lars Cc: Alan Cox Signed-off-by: Jeff Garzik --- drivers/ata/libata-core.c | 20 ++++++++++++++++++-- include/linux/libata.h | 1 + 2 files changed, 19 insertions(+), 2 deletions(-) diff --git a/drivers/ata/libata-core.c b/drivers/ata/libata-core.c index 045a486a09e..2c6aedaef71 100644 --- a/drivers/ata/libata-core.c +++ b/drivers/ata/libata-core.c @@ -3392,17 +3392,27 @@ int ata_down_xfermask_limit(struct ata_device *dev, unsigned int sel) static int ata_dev_set_mode(struct ata_device *dev) { + struct ata_port *ap = dev->link->ap; struct ata_eh_context *ehc = &dev->link->eh_context; + const bool nosetxfer = dev->horkage & ATA_HORKAGE_NOSETXFER; const char *dev_err_whine = ""; int ign_dev_err = 0; - unsigned int err_mask; + unsigned int err_mask = 0; int rc; dev->flags &= ~ATA_DFLAG_PIO; if (dev->xfer_shift == ATA_SHIFT_PIO) dev->flags |= ATA_DFLAG_PIO; - err_mask = ata_dev_set_xfermode(dev); + if (nosetxfer && ap->flags & ATA_FLAG_SATA && ata_id_is_sata(dev->id)) + dev_err_whine = " (SET_XFERMODE skipped)"; + else { + if (nosetxfer) + ata_dev_printk(dev, KERN_WARNING, + "NOSETXFER but PATA detected - can't " + "skip SETXFER, might malfunction\n"); + err_mask = ata_dev_set_xfermode(dev); + } if (err_mask & ~AC_ERR_DEV) goto fail; @@ -4297,6 +4307,12 @@ static const struct ata_blacklist_entry ata_device_blacklist [] = { /* Devices which aren't very happy with higher link speeds */ { "WD My Book", NULL, ATA_HORKAGE_1_5_GBPS, }, + /* + * Devices which choke on SETXFER. Applies only if both the + * device and controller are SATA. + */ + { "PIONEER DVD-RW DVRTD08", "1.00", ATA_HORKAGE_NOSETXFER }, + /* End Marker */ { } }; diff --git a/include/linux/libata.h b/include/linux/libata.h index 3d501db36a2..79b6d7fd4ac 100644 --- a/include/linux/libata.h +++ b/include/linux/libata.h @@ -385,6 +385,7 @@ enum { not multiple of 16 bytes */ ATA_HORKAGE_FIRMWARE_WARN = (1 << 12), /* firmware update warning */ ATA_HORKAGE_1_5_GBPS = (1 << 13), /* force 1.5 Gbps */ + ATA_HORKAGE_NOSETXFER = (1 << 14), /* skip SETXFER, SATA only */ /* DMA mask for user DMA control: User visible values; DO NOT renumber */ -- cgit v1.2.3 From 1e1f421a8137824127a41303a30493356b5da638 Mon Sep 17 00:00:00 2001 From: Julia Lawall Date: Sat, 11 Jul 2009 09:49:48 +0200 Subject: drivers/ata: Move a dereference below a NULL test If the NULL test is necessary, then the dereference should be moved below the NULL test. The semantic patch that makes this change is as follows: (http://www.emn.fr/x-info/coccinelle/) // @@ type T; expression E; identifier i,fld; statement S; @@ - T i = E->fld; + T i; ... when != E when != i if (E == NULL) S + i = E->fld; // Signed-off-by: Julia Lawall Signed-off-by: Jeff Garzik --- drivers/ata/pata_at91.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/ata/pata_at91.c b/drivers/ata/pata_at91.c index 4b27617be26..8561a9f195c 100644 --- a/drivers/ata/pata_at91.c +++ b/drivers/ata/pata_at91.c @@ -312,11 +312,12 @@ err_ide_ioremap: static int __devexit pata_at91_remove(struct platform_device *pdev) { struct ata_host *host = dev_get_drvdata(&pdev->dev); - struct at91_ide_info *info = host->private_data; + struct at91_ide_info *info; struct device *dev = &pdev->dev; if (!host) return 0; + info = host->private_data; ata_host_detach(host); -- cgit v1.2.3 From b2dde6afe5d29212d521e69492ebc299db235001 Mon Sep 17 00:00:00 2001 From: Mark Goodwin Date: Fri, 26 Jun 2009 10:44:11 -0500 Subject: ahci: add device ID for 82801JI sata controller Add device ID for Intel 82801JI SATA AHCI controller. Signed-off-by: David Milburn Signed-off-by: Jeff Garzik --- drivers/ata/ahci.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/ata/ahci.c b/drivers/ata/ahci.c index 15a23031833..336eb1ed73c 100644 --- a/drivers/ata/ahci.c +++ b/drivers/ata/ahci.c @@ -513,6 +513,7 @@ static const struct pci_device_id ahci_pci_tbl[] = { { PCI_VDEVICE(INTEL, 0x502a), board_ahci }, /* Tolapai */ { PCI_VDEVICE(INTEL, 0x502b), board_ahci }, /* Tolapai */ { PCI_VDEVICE(INTEL, 0x3a05), board_ahci }, /* ICH10 */ + { PCI_VDEVICE(INTEL, 0x3a22), board_ahci }, /* ICH10 */ { PCI_VDEVICE(INTEL, 0x3a25), board_ahci }, /* ICH10 */ { PCI_VDEVICE(INTEL, 0x3b24), board_ahci }, /* PCH RAID */ { PCI_VDEVICE(INTEL, 0x3b25), board_ahci }, /* PCH RAID */ -- cgit v1.2.3 From 069a9dce384e211784ce6fdfaf1f13921327480d Mon Sep 17 00:00:00 2001 From: Alex Deucher Date: Wed, 1 Jul 2009 13:03:52 -0400 Subject: drm/radeon: add some missing pci ids Also, fix ordering for a couple others Signed-off-by: Alex Deucher Signed-off-by: Dave Airlie --- include/drm/drm_pciids.h | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) diff --git a/include/drm/drm_pciids.h b/include/drm/drm_pciids.h index 45c18672b09..7174818c2c1 100644 --- a/include/drm/drm_pciids.h +++ b/include/drm/drm_pciids.h @@ -43,6 +43,7 @@ {0x1002, 0x4A4F, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_R420|RADEON_NEW_MEMMAP}, \ {0x1002, 0x4A50, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_R420|RADEON_NEW_MEMMAP}, \ {0x1002, 0x4A54, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_R420|RADEON_NEW_MEMMAP}, \ + {0x1002, 0x4B48, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_R420|RADEON_NEW_MEMMAP}, \ {0x1002, 0x4B49, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_R420|RADEON_NEW_MEMMAP}, \ {0x1002, 0x4B4A, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_R420|RADEON_NEW_MEMMAP}, \ {0x1002, 0x4B4B, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_R420|RADEON_NEW_MEMMAP}, \ @@ -262,6 +263,7 @@ {0x1002, 0x9440, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV770|RADEON_NEW_MEMMAP}, \ {0x1002, 0x9441, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV770|RADEON_NEW_MEMMAP}, \ {0x1002, 0x9442, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV770|RADEON_NEW_MEMMAP}, \ + {0x1002, 0x9443, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV770|RADEON_NEW_MEMMAP}, \ {0x1002, 0x9444, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV770|RADEON_NEW_MEMMAP}, \ {0x1002, 0x9446, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV770|RADEON_NEW_MEMMAP}, \ {0x1002, 0x944A, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV770|RADEON_IS_MOBILITY|RADEON_NEW_MEMMAP}, \ @@ -346,12 +348,12 @@ {0x1002, 0x9599, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV635|RADEON_NEW_MEMMAP}, \ {0x1002, 0x959B, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV635|RADEON_IS_MOBILITY|RADEON_NEW_MEMMAP}, \ {0x1002, 0x95C0, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV620|RADEON_NEW_MEMMAP}, \ + {0x1002, 0x95C2, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV620|RADEON_IS_MOBILITY|RADEON_NEW_MEMMAP}, \ + {0x1002, 0x95C4, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV620|RADEON_IS_MOBILITY|RADEON_NEW_MEMMAP}, \ {0x1002, 0x95C5, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV620|RADEON_NEW_MEMMAP}, \ {0x1002, 0x95C6, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV620|RADEON_NEW_MEMMAP}, \ {0x1002, 0x95C7, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV620|RADEON_NEW_MEMMAP}, \ {0x1002, 0x95C9, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV620|RADEON_NEW_MEMMAP}, \ - {0x1002, 0x95C2, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV620|RADEON_IS_MOBILITY|RADEON_NEW_MEMMAP}, \ - {0x1002, 0x95C4, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV620|RADEON_IS_MOBILITY|RADEON_NEW_MEMMAP}, \ {0x1002, 0x95CC, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV620|RADEON_NEW_MEMMAP}, \ {0x1002, 0x95CD, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV620|RADEON_NEW_MEMMAP}, \ {0x1002, 0x95CE, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV620|RADEON_NEW_MEMMAP}, \ -- cgit v1.2.3 From d25e3a6faa82eeaa6e5487c2d2e27cfd938ed108 Mon Sep 17 00:00:00 2001 From: Jiri Slaby Date: Mon, 13 Jul 2009 23:20:20 +0200 Subject: drm: drm_debugfs, check kmalloc retval Check kmalloc return value in drm_debugfs_create_files and bail out appropriately if the pointer is NULL. Signed-off-by: Jiri Slaby Signed-off-by: Dave Airlie --- drivers/gpu/drm/drm_debugfs.c | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/drivers/gpu/drm/drm_debugfs.c b/drivers/gpu/drm/drm_debugfs.c index 2960b6d7345..9903f270e44 100644 --- a/drivers/gpu/drm/drm_debugfs.c +++ b/drivers/gpu/drm/drm_debugfs.c @@ -101,6 +101,10 @@ int drm_debugfs_create_files(struct drm_info_list *files, int count, continue; tmp = kmalloc(sizeof(struct drm_info_node), GFP_KERNEL); + if (tmp == NULL) { + ret = -1; + goto fail; + } ent = debugfs_create_file(files[i].name, S_IFREG | S_IRUGO, root, tmp, &drm_debugfs_fops); if (!ent) { -- cgit v1.2.3 From 845792d940f5755b7a7837c450a71d9e831a13e2 Mon Sep 17 00:00:00 2001 From: Jiri Slaby Date: Mon, 13 Jul 2009 23:20:21 +0200 Subject: drm: drm_gem, check kzalloc retval Check kzalloc retval against NULL in drm_gem_object_alloc and bail out appropriately. While at it merge the fail paths and jump to them by gotos at the end of the function. Signed-off-by: Jiri Slaby Signed-off-by: Dave Airlie --- drivers/gpu/drm/drm_gem.c | 17 ++++++++++------- 1 file changed, 10 insertions(+), 7 deletions(-) diff --git a/drivers/gpu/drm/drm_gem.c b/drivers/gpu/drm/drm_gem.c index 8104ecaea26..ffe8f4394d5 100644 --- a/drivers/gpu/drm/drm_gem.c +++ b/drivers/gpu/drm/drm_gem.c @@ -134,26 +134,29 @@ drm_gem_object_alloc(struct drm_device *dev, size_t size) BUG_ON((size & (PAGE_SIZE - 1)) != 0); obj = kzalloc(sizeof(*obj), GFP_KERNEL); + if (!obj) + goto free; obj->dev = dev; obj->filp = shmem_file_setup("drm mm object", size, VM_NORESERVE); - if (IS_ERR(obj->filp)) { - kfree(obj); - return NULL; - } + if (IS_ERR(obj->filp)) + goto free; kref_init(&obj->refcount); kref_init(&obj->handlecount); obj->size = size; if (dev->driver->gem_init_object != NULL && dev->driver->gem_init_object(obj) != 0) { - fput(obj->filp); - kfree(obj); - return NULL; + goto fput; } atomic_inc(&dev->object_count); atomic_add(obj->size, &dev->object_memory); return obj; +fput: + fput(obj->filp); +free: + kfree(obj); + return NULL; } EXPORT_SYMBOL(drm_gem_object_alloc); -- cgit v1.2.3 From 42dd8619940a153e950c4d2301cd5e49f7342f99 Mon Sep 17 00:00:00 2001 From: Simon Farnsworth Date: Fri, 10 Jul 2009 11:25:16 +0100 Subject: drm/via: Fix vblank IRQ on VIA hardware. via_enable_vblank wasn't setting the VBlank enable bit - instead, it was masking out the rest of the register. At the same time, fix via_disable_vblank to clear the VBlank enable bit. Signed-off-by: Dave Airlie --- drivers/gpu/drm/via/via_irq.c | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-) diff --git a/drivers/gpu/drm/via/via_irq.c b/drivers/gpu/drm/via/via_irq.c index c248c1d3726..5935b8842e8 100644 --- a/drivers/gpu/drm/via/via_irq.c +++ b/drivers/gpu/drm/via/via_irq.c @@ -183,7 +183,7 @@ int via_enable_vblank(struct drm_device *dev, int crtc) } status = VIA_READ(VIA_REG_INTERRUPT); - VIA_WRITE(VIA_REG_INTERRUPT, status & VIA_IRQ_VBLANK_ENABLE); + VIA_WRITE(VIA_REG_INTERRUPT, status | VIA_IRQ_VBLANK_ENABLE); VIA_WRITE8(0x83d4, 0x11); VIA_WRITE8(0x83d5, VIA_READ8(0x83d5) | 0x30); @@ -194,6 +194,10 @@ int via_enable_vblank(struct drm_device *dev, int crtc) void via_disable_vblank(struct drm_device *dev, int crtc) { drm_via_private_t *dev_priv = dev->dev_private; + u32 status; + + status = VIA_READ(VIA_REG_INTERRUPT); + VIA_WRITE(VIA_REG_INTERRUPT, status & ~VIA_IRQ_VBLANK_ENABLE); VIA_WRITE8(0x83d4, 0x11); VIA_WRITE8(0x83d5, VIA_READ8(0x83d5) & ~0x30); -- cgit v1.2.3 From 916635bfcae5fec170ccd36f4b451cf7c5d23b9d Mon Sep 17 00:00:00 2001 From: Roel Kluin Date: Wed, 15 Jul 2009 16:00:37 +1000 Subject: drm/ttm: fix misplaced parentheses Signed-off-by: Roel Kluin Signed-off-by: Andrew Morton Signed-off-by: Dave Airlie --- drivers/gpu/drm/ttm/ttm_bo_vm.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/gpu/drm/ttm/ttm_bo_vm.c b/drivers/gpu/drm/ttm/ttm_bo_vm.c index 40b75032ea4..fe949a12fe4 100644 --- a/drivers/gpu/drm/ttm/ttm_bo_vm.c +++ b/drivers/gpu/drm/ttm/ttm_bo_vm.c @@ -327,7 +327,7 @@ ssize_t ttm_bo_io(struct ttm_bo_device *bdev, struct file *filp, goto out_unref; kmap_offset = dev_offset - bo->vm_node->start; - if (unlikely(kmap_offset) >= bo->num_pages) { + if (unlikely(kmap_offset >= bo->num_pages)) { ret = -EFBIG; goto out_unref; } @@ -401,7 +401,7 @@ ssize_t ttm_bo_fbdev_io(struct ttm_buffer_object *bo, const char __user *wbuf, bool dummy; kmap_offset = (*f_pos >> PAGE_SHIFT); - if (unlikely(kmap_offset) >= bo->num_pages) + if (unlikely(kmap_offset >= bo->num_pages)) return -EFBIG; page_offset = *f_pos & ~PAGE_MASK; -- cgit v1.2.3 From ba0ab82358a12e7a7f2872d6b65c437157c6888f Mon Sep 17 00:00:00 2001 From: Jesse Barnes Date: Fri, 3 Jul 2009 11:24:46 -0700 Subject: fb/intelfb: conflict with DRM_I915 and hide by default Users get confused by this driver. It's really a special purpose embedded driver, and causes a lot of problems if enabled. So hide it under EMBEDDED by default, and make sure it doesn't get enabled with the i915 DRM driver. Dave, I'm hoping you can feed this to Linus through your tree. It's appropriate for 2.6.31 I think. Signed-off-by: Jesse Barnes Signed-off-by: Dave Airlie --- drivers/video/Kconfig | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/video/Kconfig b/drivers/video/Kconfig index 8afcf08eba9..3b54b394017 100644 --- a/drivers/video/Kconfig +++ b/drivers/video/Kconfig @@ -1119,12 +1119,13 @@ config FB_CARILLO_RANCH config FB_INTEL tristate "Intel 830M/845G/852GM/855GM/865G/915G/945G/945GM/965G/965GM support (EXPERIMENTAL)" - depends on EXPERIMENTAL && FB && PCI && X86 && AGP_INTEL + depends on EXPERIMENTAL && FB && PCI && X86 && AGP_INTEL && EMBEDDED select FB_MODE_HELPERS select FB_CFB_FILLRECT select FB_CFB_COPYAREA select FB_CFB_IMAGEBLIT select FB_BOOT_VESA_SUPPORT if FB_INTEL = y + depends on !DRM_I915 help This driver supports the on-board graphics built in to the Intel 830M/845G/852GM/855GM/865G/915G/915GM/945G/945GM/965G/965GM chipsets. -- cgit v1.2.3 From ecca0683230b83e8f830ff157911fad20bc43015 Mon Sep 17 00:00:00 2001 From: Julia Lawall Date: Sat, 11 Jul 2009 09:50:09 +0200 Subject: drm: Move a dereference below a NULL test If the NULL test is necessary, then the dereference should be moved below the NULL test. The semantic patch that makes this change is as follows: (http://www.emn.fr/x-info/coccinelle/) // @@ type T; expression E; identifier i,fld; statement S; @@ - T i = E->fld; + T i; ... when != E when != i if (E == NULL) S + i = E->fld; // Signed-off-by: Julia Lawall Signed-off-by: Dave Airlie --- drivers/gpu/drm/drm_stub.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/gpu/drm/drm_stub.c b/drivers/gpu/drm/drm_stub.c index 155a5bbce68..55bb8a82d61 100644 --- a/drivers/gpu/drm/drm_stub.c +++ b/drivers/gpu/drm/drm_stub.c @@ -489,7 +489,7 @@ int drm_put_minor(struct drm_minor **minor_p) */ void drm_put_dev(struct drm_device *dev) { - struct drm_driver *driver = dev->driver; + struct drm_driver *driver; struct drm_map_list *r_list, *list_temp; DRM_DEBUG("\n"); @@ -498,6 +498,7 @@ void drm_put_dev(struct drm_device *dev) DRM_ERROR("cleanup called no dev\n"); return; } + driver = dev->driver; drm_vblank_cleanup(dev); -- cgit v1.2.3 From ed10f95d60d41033d356fdcf88c240d7065bd5b4 Mon Sep 17 00:00:00 2001 From: Dave Airlie Date: Mon, 29 Jun 2009 18:29:11 +1000 Subject: drm/radeon/kms: fix some GART table entry bugs. 1. rv370 can accept 40-bit addresses - also at 24-bit shift not 4 bits 2. rs480 table can be in 40-bit space. - 4 bit shift for top 8 bits 3. rs480 table entries can be in 40-bit space. Signed-off-by: Dave Airlie --- drivers/gpu/drm/radeon/r100.c | 2 +- drivers/gpu/drm/radeon/r300.c | 4 +++- drivers/gpu/drm/radeon/radeon_gart.c | 2 +- drivers/gpu/drm/radeon/rs400.c | 13 +++++++++++-- 4 files changed, 16 insertions(+), 5 deletions(-) diff --git a/drivers/gpu/drm/radeon/r100.c b/drivers/gpu/drm/radeon/r100.c index c550932a108..1b23106f955 100644 --- a/drivers/gpu/drm/radeon/r100.c +++ b/drivers/gpu/drm/radeon/r100.c @@ -110,7 +110,7 @@ int r100_pci_gart_set_page(struct radeon_device *rdev, int i, uint64_t addr) if (i < 0 || i > rdev->gart.num_gpu_pages) { return -EINVAL; } - rdev->gart.table.ram.ptr[i] = cpu_to_le32((uint32_t)addr); + rdev->gart.table.ram.ptr[i] = cpu_to_le32(lower_32_bits(addr)); return 0; } diff --git a/drivers/gpu/drm/radeon/r300.c b/drivers/gpu/drm/radeon/r300.c index e2ed5bc0817..cd9ea98e9c6 100644 --- a/drivers/gpu/drm/radeon/r300.c +++ b/drivers/gpu/drm/radeon/r300.c @@ -150,7 +150,9 @@ int rv370_pcie_gart_set_page(struct radeon_device *rdev, int i, uint64_t addr) if (i < 0 || i > rdev->gart.num_gpu_pages) { return -EINVAL; } - addr = (((u32)addr) >> 8) | ((upper_32_bits(addr) & 0xff) << 4) | 0xC; + addr = (lower_32_bits(addr) >> 8) | + ((upper_32_bits(addr) & 0xff) << 24) | + 0xc; writel(cpu_to_le32(addr), ((void __iomem *)ptr) + (i * 4)); return 0; } diff --git a/drivers/gpu/drm/radeon/radeon_gart.c b/drivers/gpu/drm/radeon/radeon_gart.c index d343a15316e..2977539880f 100644 --- a/drivers/gpu/drm/radeon/radeon_gart.c +++ b/drivers/gpu/drm/radeon/radeon_gart.c @@ -177,7 +177,7 @@ int radeon_gart_bind(struct radeon_device *rdev, unsigned offset, return -ENOMEM; } rdev->gart.pages[p] = pagelist[i]; - page_base = (uint32_t)rdev->gart.pages_addr[p]; + page_base = rdev->gart.pages_addr[p]; for (j = 0; j < (PAGE_SIZE / 4096); j++, t++) { radeon_gart_set_page(rdev, t, page_base); page_base += 4096; diff --git a/drivers/gpu/drm/radeon/rs400.c b/drivers/gpu/drm/radeon/rs400.c index cc074b5a8f7..3275de4b6e3 100644 --- a/drivers/gpu/drm/radeon/rs400.c +++ b/drivers/gpu/drm/radeon/rs400.c @@ -164,7 +164,9 @@ int rs400_gart_enable(struct radeon_device *rdev) WREG32(RADEON_BUS_CNTL, tmp); } /* Table should be in 32bits address space so ignore bits above. */ - tmp = rdev->gart.table_addr & 0xfffff000; + tmp = (u32)rdev->gart.table_addr & 0xfffff000; + tmp |= (upper_32_bits(rdev->gart.table_addr) & 0xff) << 4; + WREG32_MC(RS480_GART_BASE, tmp); /* TODO: more tweaking here */ WREG32_MC(RS480_GART_FEATURE_ID, @@ -201,10 +203,17 @@ void rs400_gart_disable(struct radeon_device *rdev) int rs400_gart_set_page(struct radeon_device *rdev, int i, uint64_t addr) { + uint32_t entry; + if (i < 0 || i > rdev->gart.num_gpu_pages) { return -EINVAL; } - rdev->gart.table.ram.ptr[i] = cpu_to_le32(((uint32_t)addr) | 0xC); + + entry = (lower_32_bits(addr) & PAGE_MASK) | + ((upper_32_bits(addr) & 0xff) << 4) | + 0xc; + entry = cpu_to_le32(entry); + rdev->gart.table.ram.ptr[i] = entry; return 0; } -- cgit v1.2.3 From 4c9bc75cbc6f2f447a38a123aa6e0605fab3cb7a Mon Sep 17 00:00:00 2001 From: Dave Airlie Date: Mon, 29 Jun 2009 18:29:12 +1000 Subject: drm/radeon/kms: mmio base/size should be resource_size_t. Unsigned long is incorrect for 64-bit resources on 32-bit hw. Signed-off-by: Dave Airlie --- drivers/gpu/drm/radeon/radeon.h | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/gpu/drm/radeon/radeon.h b/drivers/gpu/drm/radeon/radeon.h index d61f2fc61df..e7662ba9abf 100644 --- a/drivers/gpu/drm/radeon/radeon.h +++ b/drivers/gpu/drm/radeon/radeon.h @@ -594,8 +594,8 @@ struct radeon_device { struct radeon_object *fbdev_robj; struct radeon_framebuffer *fbdev_rfb; /* Register mmio */ - unsigned long rmmio_base; - unsigned long rmmio_size; + resource_size_t rmmio_base; + resource_size_t rmmio_size; void *rmmio; radeon_rreg_t mm_rreg; radeon_wreg_t mm_wreg; -- cgit v1.2.3 From 6cdf65855cf884712532fc72770baaef7bdf1b9a Mon Sep 17 00:00:00 2001 From: Dave Airlie Date: Mon, 29 Jun 2009 18:29:13 +1000 Subject: drm/radeon/kms: remove IB flushing trick. If there is a problem then this is hiding it, we shouldn't ever need to flush the IB. Either the buffers are: WB - caching just works. WC - no need to do explicit flush, the MB + readback will do it Signed-off-by: Dave Airlie --- drivers/gpu/drm/radeon/radeon_ring.c | 15 +-------------- 1 file changed, 1 insertion(+), 14 deletions(-) diff --git a/drivers/gpu/drm/radeon/radeon_ring.c b/drivers/gpu/drm/radeon/radeon_ring.c index a853261d188..60d159308b8 100644 --- a/drivers/gpu/drm/radeon/radeon_ring.c +++ b/drivers/gpu/drm/radeon/radeon_ring.c @@ -126,32 +126,19 @@ static void radeon_ib_align(struct radeon_device *rdev, struct radeon_ib *ib) } } -static void radeon_ib_cpu_flush(struct radeon_device *rdev, - struct radeon_ib *ib) -{ - unsigned long tmp; - unsigned i; - - /* To force CPU cache flush ugly but seems reliable */ - for (i = 0; i < ib->length_dw; i += (rdev->cp.align_mask + 1)) { - tmp = readl(&ib->ptr[i]); - } -} - int radeon_ib_schedule(struct radeon_device *rdev, struct radeon_ib *ib) { int r = 0; mutex_lock(&rdev->ib_pool.mutex); radeon_ib_align(rdev, ib); - radeon_ib_cpu_flush(rdev, ib); if (!ib->length_dw || !rdev->cp.ready) { /* TODO: Nothings in the ib we should report. */ mutex_unlock(&rdev->ib_pool.mutex); DRM_ERROR("radeon: couldn't schedule IB(%lu).\n", ib->idx); return -EINVAL; } - /* 64 dwords should be enought for fence too */ + /* 64 dwords should be enough for fence too */ r = radeon_ring_lock(rdev, 64); if (r) { DRM_ERROR("radeon: scheduling IB failled (%d).\n", r); -- cgit v1.2.3 From 4162338a1dab388474d4115289d1d7071623f04d Mon Sep 17 00:00:00 2001 From: Dave Airlie Date: Thu, 9 Jul 2009 15:04:19 +1000 Subject: drm/radeon/kms: set crtc and cursor offsets correctly on legacy chips. The crtc and cursor offsets on the legacy chips are offset from DISPLAY_BASE_ADDR. The code worked if display base addr was at 0, but otherwise falls to pieces. Signed-off-by: Dave Airlie --- drivers/gpu/drm/radeon/radeon_cursor.c | 2 +- drivers/gpu/drm/radeon/radeon_legacy_crtc.c | 11 +++++++---- drivers/gpu/drm/radeon/radeon_mode.h | 1 + 3 files changed, 9 insertions(+), 5 deletions(-) diff --git a/drivers/gpu/drm/radeon/radeon_cursor.c b/drivers/gpu/drm/radeon/radeon_cursor.c index 5232441f119..5f8ce370c4f 100644 --- a/drivers/gpu/drm/radeon/radeon_cursor.c +++ b/drivers/gpu/drm/radeon/radeon_cursor.c @@ -113,7 +113,7 @@ static void radeon_set_cursor(struct drm_crtc *crtc, struct drm_gem_object *obj, WREG32(AVIVO_D1CUR_SURFACE_ADDRESS + radeon_crtc->crtc_offset, gpu_addr); else /* offset is from DISP(2)_BASE_ADDRESS */ - WREG32(RADEON_CUR_OFFSET + radeon_crtc->crtc_offset, gpu_addr); + WREG32(RADEON_CUR_OFFSET + radeon_crtc->crtc_offset, (gpu_addr-radeon_crtc->legacy_display_base_addr)); } int radeon_crtc_cursor_set(struct drm_crtc *crtc, diff --git a/drivers/gpu/drm/radeon/radeon_legacy_crtc.c b/drivers/gpu/drm/radeon/radeon_legacy_crtc.c index 8086ecf7f03..14c1a5107fc 100644 --- a/drivers/gpu/drm/radeon/radeon_legacy_crtc.c +++ b/drivers/gpu/drm/radeon/radeon_legacy_crtc.c @@ -244,7 +244,12 @@ int radeon_crtc_set_base(struct drm_crtc *crtc, int x, int y, if (radeon_gem_object_pin(obj, RADEON_GEM_DOMAIN_VRAM, &base)) { return -EINVAL; } - crtc_offset = (u32)base; + /* if scanout was in GTT this really wouldn't work */ + /* crtc offset is from display base addr not FB location */ + radeon_crtc->legacy_display_base_addr = rdev->mc.vram_location; + + base -= radeon_crtc->legacy_display_base_addr; + crtc_offset_cntl = 0; pitch_pixels = crtc->fb->pitch / (crtc->fb->bits_per_pixel / 8); @@ -303,11 +308,9 @@ int radeon_crtc_set_base(struct drm_crtc *crtc, int x, int y, base &= ~7; - /* update sarea TODO */ - crtc_offset = (u32)base; - WREG32(RADEON_DISPLAY_BASE_ADDR + radeon_crtc->crtc_offset, rdev->mc.vram_location); + WREG32(RADEON_DISPLAY_BASE_ADDR + radeon_crtc->crtc_offset, radeon_crtc->legacy_display_base_addr); if (ASIC_IS_R300(rdev)) { if (radeon_crtc->crtc_id) diff --git a/drivers/gpu/drm/radeon/radeon_mode.h b/drivers/gpu/drm/radeon/radeon_mode.h index 9173b687462..86f766e868e 100644 --- a/drivers/gpu/drm/radeon/radeon_mode.h +++ b/drivers/gpu/drm/radeon/radeon_mode.h @@ -185,6 +185,7 @@ struct radeon_crtc { uint64_t cursor_addr; int cursor_width; int cursor_height; + uint32_t legacy_display_base_addr; }; #define RADEON_USE_RMX 1 -- cgit v1.2.3 From 3e43d82125952826202a8cd20ba84a66f3ff8808 Mon Sep 17 00:00:00 2001 From: Dave Airlie Date: Thu, 9 Jul 2009 15:04:18 +1000 Subject: drm/radeon/kms: respect TOM on rs100->rs480 IGP variants. Normally we are free to place VRAM where we want in the GPUs memory address space, however on IGP chips the VRAM is actual RAM, and no special translation or aperture is used inside the GPU MC. So when you move the VRAM aperture away from the TOM register, you actually move it into main memory and can trash things quite badly. This commit makes the code respect the TOM location for MC_FB_LOCATION. Signed-off-by: Dave Airlie --- drivers/gpu/drm/radeon/r100.c | 5 ++++- drivers/gpu/drm/radeon/rs400.c | 6 ++++-- 2 files changed, 8 insertions(+), 3 deletions(-) diff --git a/drivers/gpu/drm/radeon/r100.c b/drivers/gpu/drm/radeon/r100.c index 1b23106f955..a3db56bb013 100644 --- a/drivers/gpu/drm/radeon/r100.c +++ b/drivers/gpu/drm/radeon/r100.c @@ -215,7 +215,6 @@ int r100_mc_init(struct radeon_device *rdev) r100_pci_gart_disable(rdev); /* Setup GPU memory space */ - rdev->mc.vram_location = 0xFFFFFFFFUL; rdev->mc.gtt_location = 0xFFFFFFFFUL; if (rdev->flags & RADEON_IS_AGP) { r = radeon_agp_init(rdev); @@ -1265,6 +1264,8 @@ void r100_vram_info(struct radeon_device *rdev) /* read NB_TOM to get the amount of ram stolen for the GPU */ tom = RREG32(RADEON_NB_TOM); rdev->mc.vram_size = (((tom >> 16) - (tom & 0xffff) + 1) << 16); + /* for IGPs we need to keep VRAM where it was put by the BIOS */ + rdev->mc.vram_location = (tom & 0xffff) << 16; WREG32(RADEON_CONFIG_MEMSIZE, rdev->mc.vram_size); } else { rdev->mc.vram_size = RREG32(RADEON_CONFIG_MEMSIZE); @@ -1275,6 +1276,8 @@ void r100_vram_info(struct radeon_device *rdev) rdev->mc.vram_size = 8192 * 1024; WREG32(RADEON_CONFIG_MEMSIZE, rdev->mc.vram_size); } + /* let driver place VRAM */ + rdev->mc.vram_location = 0xFFFFFFFFUL; } rdev->mc.aper_base = drm_get_resource_start(rdev->ddev, 0); diff --git a/drivers/gpu/drm/radeon/rs400.c b/drivers/gpu/drm/radeon/rs400.c index 3275de4b6e3..a18d053065c 100644 --- a/drivers/gpu/drm/radeon/rs400.c +++ b/drivers/gpu/drm/radeon/rs400.c @@ -235,7 +235,6 @@ int rs400_mc_init(struct radeon_device *rdev) rdev->mc.gtt_location = rdev->mc.vram_size; rdev->mc.gtt_location += (rdev->mc.gtt_size - 1); rdev->mc.gtt_location &= ~(rdev->mc.gtt_size - 1); - rdev->mc.vram_location = 0xFFFFFFFFUL; r = radeon_mc_setup(rdev); if (r) { return r; @@ -305,7 +304,10 @@ void rs400_vram_info(struct radeon_device *rdev) rdev->mc.vram_size = (((tom >> 16) - (tom & 0xffff) + 1) << 16); WREG32(RADEON_CONFIG_MEMSIZE, rdev->mc.vram_size); - /* Could aper size report 0 ? */ + /* RS480 IGPs don't seem to translate to main RAM, they + * just reserve and scan out of it. So setting VRAM location + * to say 0, will actually trash the OS. */ + rdev->mc.vram_location = (tom & 0xffff) << 16; rdev->mc.aper_base = drm_get_resource_start(rdev->ddev, 0); rdev->mc.aper_size = drm_get_resource_len(rdev->ddev, 0); } -- cgit v1.2.3 From 531369e62649bb8f31217cc0bf33ee6f89f1dff6 Mon Sep 17 00:00:00 2001 From: Dave Airlie Date: Mon, 29 Jun 2009 11:21:25 +1000 Subject: drm/radeon: fix support for vline relocations. Userspace sends us a special relocation type to sync video/exa to vlines to avoid tearing, this deals with the relocation in the kernel, it picks the correct crtc and avoids issues where crtcs are disabled. This version also parses the wait until to make sure it isn't trying to do anything evil. Signed-off-by: Dave Airlie --- drivers/gpu/drm/radeon/r100.c | 105 ++++++++++++++++++++++++++++++++++++++ drivers/gpu/drm/radeon/r300.c | 13 ++++- drivers/gpu/drm/radeon/r500_reg.h | 2 + drivers/gpu/drm/radeon/rv515.c | 23 +++++++-- 4 files changed, 137 insertions(+), 6 deletions(-) diff --git a/drivers/gpu/drm/radeon/r100.c b/drivers/gpu/drm/radeon/r100.c index a3db56bb013..154648a2c02 100644 --- a/drivers/gpu/drm/radeon/r100.c +++ b/drivers/gpu/drm/radeon/r100.c @@ -751,6 +751,102 @@ int r100_cs_packet_parse(struct radeon_cs_parser *p, return 0; } +/** + * r100_cs_packet_next_vline() - parse userspace VLINE packet + * @parser: parser structure holding parsing context. + * + * Userspace sends a special sequence for VLINE waits. + * PACKET0 - VLINE_START_END + value + * PACKET0 - WAIT_UNTIL +_value + * RELOC (P3) - crtc_id in reloc. + * + * This function parses this and relocates the VLINE START END + * and WAIT UNTIL packets to the correct crtc. + * It also detects a switched off crtc and nulls out the + * wait in that case. + */ +int r100_cs_packet_parse_vline(struct radeon_cs_parser *p) +{ + struct radeon_cs_chunk *ib_chunk; + struct drm_mode_object *obj; + struct drm_crtc *crtc; + struct radeon_crtc *radeon_crtc; + struct radeon_cs_packet p3reloc, waitreloc; + int crtc_id; + int r; + uint32_t header, h_idx, reg; + + ib_chunk = &p->chunks[p->chunk_ib_idx]; + + /* parse the wait until */ + r = r100_cs_packet_parse(p, &waitreloc, p->idx); + if (r) + return r; + + /* check its a wait until and only 1 count */ + if (waitreloc.reg != RADEON_WAIT_UNTIL || + waitreloc.count != 0) { + DRM_ERROR("vline wait had illegal wait until segment\n"); + r = -EINVAL; + return r; + } + + if (ib_chunk->kdata[waitreloc.idx + 1] != RADEON_WAIT_CRTC_VLINE) { + DRM_ERROR("vline wait had illegal wait until\n"); + r = -EINVAL; + return r; + } + + /* jump over the NOP */ + r = r100_cs_packet_parse(p, &p3reloc, p->idx); + if (r) + return r; + + h_idx = p->idx - 2; + p->idx += waitreloc.count; + p->idx += p3reloc.count; + + header = ib_chunk->kdata[h_idx]; + crtc_id = ib_chunk->kdata[h_idx + 5]; + reg = ib_chunk->kdata[h_idx] >> 2; + mutex_lock(&p->rdev->ddev->mode_config.mutex); + obj = drm_mode_object_find(p->rdev->ddev, crtc_id, DRM_MODE_OBJECT_CRTC); + if (!obj) { + DRM_ERROR("cannot find crtc %d\n", crtc_id); + r = -EINVAL; + goto out; + } + crtc = obj_to_crtc(obj); + radeon_crtc = to_radeon_crtc(crtc); + crtc_id = radeon_crtc->crtc_id; + + if (!crtc->enabled) { + /* if the CRTC isn't enabled - we need to nop out the wait until */ + ib_chunk->kdata[h_idx + 2] = PACKET2(0); + ib_chunk->kdata[h_idx + 3] = PACKET2(0); + } else if (crtc_id == 1) { + switch (reg) { + case AVIVO_D1MODE_VLINE_START_END: + header &= R300_CP_PACKET0_REG_MASK; + header |= AVIVO_D2MODE_VLINE_START_END >> 2; + break; + case RADEON_CRTC_GUI_TRIG_VLINE: + header &= R300_CP_PACKET0_REG_MASK; + header |= RADEON_CRTC2_GUI_TRIG_VLINE >> 2; + break; + default: + DRM_ERROR("unknown crtc reloc\n"); + r = -EINVAL; + goto out; + } + ib_chunk->kdata[h_idx] = header; + ib_chunk->kdata[h_idx + 3] |= RADEON_ENG_DISPLAY_SELECT_CRTC1; + } +out: + mutex_unlock(&p->rdev->ddev->mode_config.mutex); + return r; +} + /** * r100_cs_packet_next_reloc() - parse next packet which should be reloc packet3 * @parser: parser structure holding parsing context. @@ -824,6 +920,15 @@ static int r100_packet0_check(struct radeon_cs_parser *p, } for (i = 0; i <= pkt->count; i++, idx++, reg += 4) { switch (reg) { + case RADEON_CRTC_GUI_TRIG_VLINE: + r = r100_cs_packet_parse_vline(p); + if (r) { + DRM_ERROR("No reloc for ib[%d]=0x%04X\n", + idx, reg); + r100_cs_dump_packet(p, pkt); + return r; + } + break; /* FIXME: only allow PACKET3 blit? easier to check for out of * range access */ case RADEON_DST_PITCH_OFFSET: diff --git a/drivers/gpu/drm/radeon/r300.c b/drivers/gpu/drm/radeon/r300.c index cd9ea98e9c6..656d9238bb0 100644 --- a/drivers/gpu/drm/radeon/r300.c +++ b/drivers/gpu/drm/radeon/r300.c @@ -44,6 +44,7 @@ int r100_gui_wait_for_idle(struct radeon_device *rdev); int r100_cs_packet_parse(struct radeon_cs_parser *p, struct radeon_cs_packet *pkt, unsigned idx); +int r100_cs_packet_parse_vline(struct radeon_cs_parser *p); int r100_cs_packet_next_reloc(struct radeon_cs_parser *p, struct radeon_cs_reloc **cs_reloc); int r100_cs_parse_packet0(struct radeon_cs_parser *p, @@ -972,7 +973,7 @@ static inline void r300_cs_track_clear(struct r300_cs_track *track) static const unsigned r300_reg_safe_bm[159] = { 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF, - 0xFFFFFFBF, 0xFFFFFFFF, 0xFFFFFFBF, 0xFFFFFFFF, + 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF, @@ -1029,6 +1030,16 @@ static int r300_packet0_check(struct radeon_cs_parser *p, ib_chunk = &p->chunks[p->chunk_ib_idx]; track = (struct r300_cs_track*)p->track; switch(reg) { + case AVIVO_D1MODE_VLINE_START_END: + case RADEON_CRTC_GUI_TRIG_VLINE: + r = r100_cs_packet_parse_vline(p); + if (r) { + DRM_ERROR("No reloc for ib[%d]=0x%04X\n", + idx, reg); + r100_cs_dump_packet(p, pkt); + return r; + } + break; case RADEON_DST_PITCH_OFFSET: case RADEON_SRC_PITCH_OFFSET: r = r100_cs_packet_next_reloc(p, &reloc); diff --git a/drivers/gpu/drm/radeon/r500_reg.h b/drivers/gpu/drm/radeon/r500_reg.h index 9070a1c2ce2..036691b38cb 100644 --- a/drivers/gpu/drm/radeon/r500_reg.h +++ b/drivers/gpu/drm/radeon/r500_reg.h @@ -445,6 +445,7 @@ #define AVIVO_D1MODE_DATA_FORMAT 0x6528 # define AVIVO_D1MODE_INTERLEAVE_EN (1 << 0) #define AVIVO_D1MODE_DESKTOP_HEIGHT 0x652C +#define AVIVO_D1MODE_VLINE_START_END 0x6538 #define AVIVO_D1MODE_VIEWPORT_START 0x6580 #define AVIVO_D1MODE_VIEWPORT_SIZE 0x6584 #define AVIVO_D1MODE_EXT_OVERSCAN_LEFT_RIGHT 0x6588 @@ -496,6 +497,7 @@ #define AVIVO_D2CUR_SIZE 0x6c10 #define AVIVO_D2CUR_POSITION 0x6c14 +#define AVIVO_D2MODE_VLINE_START_END 0x6d38 #define AVIVO_D2MODE_VIEWPORT_START 0x6d80 #define AVIVO_D2MODE_VIEWPORT_SIZE 0x6d84 #define AVIVO_D2MODE_EXT_OVERSCAN_LEFT_RIGHT 0x6d88 diff --git a/drivers/gpu/drm/radeon/rv515.c b/drivers/gpu/drm/radeon/rv515.c index ffea37b1b3e..d1384d3991a 100644 --- a/drivers/gpu/drm/radeon/rv515.c +++ b/drivers/gpu/drm/radeon/rv515.c @@ -509,9 +509,9 @@ int rv515_debugfs_ga_info_init(struct radeon_device *rdev) /* * Asic initialization */ -static const unsigned r500_reg_safe_bm[159] = { +static const unsigned r500_reg_safe_bm[219] = { + 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF, - 0xFFFFFFBF, 0xFFFFFFFF, 0xFFFFFFBF, 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF, @@ -549,11 +549,24 @@ static const unsigned r500_reg_safe_bm[159] = { 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF, 0xFF80FFFF, 0x00000000, 0x00000000, 0x00000000, 0x00000000, - 0x0003FC01, 0x3FFFFCF8, 0xFE800B19, + 0x0003FC01, 0x3FFFFCF8, 0xFE800B19, 0xFFFFFFFF, + 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF, + 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF, + 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF, + 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF, + 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF, + 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF, + 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF, + 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF, + 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF, + 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF, + 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF, + 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF, + 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF, + 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF, + 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF, }; - - int rv515_init(struct radeon_device *rdev) { rdev->config.r300.reg_safe_bm = r500_reg_safe_bm; -- cgit v1.2.3 From d1724078d6a01177c1db4ea0b75fda1ca8a73d57 Mon Sep 17 00:00:00 2001 From: Thomas Hellstrom Date: Wed, 24 Jun 2009 19:57:35 +0200 Subject: ttm: Make messages more readable. Signed-off-by: Thomas Hellstrom Signed-off-by: Dave Airlie --- include/drm/ttm/ttm_module.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/include/drm/ttm/ttm_module.h b/include/drm/ttm/ttm_module.h index 889a4c7958a..d1d433834e4 100644 --- a/include/drm/ttm/ttm_module.h +++ b/include/drm/ttm/ttm_module.h @@ -33,7 +33,7 @@ #include -#define TTM_PFX "[TTM]" +#define TTM_PFX "[TTM] " enum ttm_global_types { TTM_GLOBAL_TTM_MEM = 0, -- cgit v1.2.3 From ae3e8122cbf8f9301369f276f4179aa6ec1b5b9c Mon Sep 17 00:00:00 2001 From: Thomas Hellstrom Date: Wed, 24 Jun 2009 19:57:34 +0200 Subject: ttm: Fix caching mode selection. A bug caused a new caching state to be selected on each buffer object validation regardless of the current caching state. Moreover, a caching state could be selected that wasn't supported by the memory type. Signed-off-by: Thomas Hellstrom Signed-off-by: Dave Airlie --- drivers/gpu/drm/ttm/ttm_bo.c | 51 +++++++++++++++++++++++++++++++++----------- 1 file changed, 39 insertions(+), 12 deletions(-) diff --git a/drivers/gpu/drm/ttm/ttm_bo.c b/drivers/gpu/drm/ttm/ttm_bo.c index c1c407f7cca..a753598a5e3 100644 --- a/drivers/gpu/drm/ttm/ttm_bo.c +++ b/drivers/gpu/drm/ttm/ttm_bo.c @@ -655,31 +655,52 @@ retry_pre_get: return 0; } +static uint32_t ttm_bo_select_caching(struct ttm_mem_type_manager *man, + uint32_t cur_placement, + uint32_t proposed_placement) +{ + uint32_t caching = proposed_placement & TTM_PL_MASK_CACHING; + uint32_t result = proposed_placement & ~TTM_PL_MASK_CACHING; + + /** + * Keep current caching if possible. + */ + + if ((cur_placement & caching) != 0) + result |= (cur_placement & caching); + else if ((man->default_caching & caching) != 0) + result |= man->default_caching; + else if ((TTM_PL_FLAG_CACHED & caching) != 0) + result |= TTM_PL_FLAG_CACHED; + else if ((TTM_PL_FLAG_WC & caching) != 0) + result |= TTM_PL_FLAG_WC; + else if ((TTM_PL_FLAG_UNCACHED & caching) != 0) + result |= TTM_PL_FLAG_UNCACHED; + + return result; +} + + static bool ttm_bo_mt_compatible(struct ttm_mem_type_manager *man, bool disallow_fixed, uint32_t mem_type, - uint32_t mask, uint32_t *res_mask) + uint32_t proposed_placement, + uint32_t *masked_placement) { uint32_t cur_flags = ttm_bo_type_flags(mem_type); if ((man->flags & TTM_MEMTYPE_FLAG_FIXED) && disallow_fixed) return false; - if ((cur_flags & mask & TTM_PL_MASK_MEM) == 0) + if ((cur_flags & proposed_placement & TTM_PL_MASK_MEM) == 0) return false; - if ((mask & man->available_caching) == 0) + if ((proposed_placement & man->available_caching) == 0) return false; - if (mask & man->default_caching) - cur_flags |= man->default_caching; - else if (mask & TTM_PL_FLAG_CACHED) - cur_flags |= TTM_PL_FLAG_CACHED; - else if (mask & TTM_PL_FLAG_WC) - cur_flags |= TTM_PL_FLAG_WC; - else - cur_flags |= TTM_PL_FLAG_UNCACHED; - *res_mask = cur_flags; + cur_flags |= (proposed_placement & man->available_caching); + + *masked_placement = cur_flags; return true; } @@ -723,6 +744,9 @@ int ttm_bo_mem_space(struct ttm_buffer_object *bo, if (!type_ok) continue; + cur_flags = ttm_bo_select_caching(man, bo->mem.placement, + cur_flags); + if (mem_type == TTM_PL_SYSTEM) break; @@ -779,6 +803,9 @@ int ttm_bo_mem_space(struct ttm_buffer_object *bo, proposed_placement, &cur_flags)) continue; + cur_flags = ttm_bo_select_caching(man, bo->mem.placement, + cur_flags); + ret = ttm_bo_mem_force_space(bdev, mem, mem_type, interruptible, no_wait); -- cgit v1.2.3 From 848577ee27f704231b1860ae987a1be78b88b06e Mon Sep 17 00:00:00 2001 From: Alex Deucher Date: Wed, 8 Jul 2009 16:15:30 -0400 Subject: drm/radeon/kms: fix quirk for MSI laptop The line mux for the connector in the bios tables is used for enumerating drm connectors. Since this laptop has a quirk where the same line much is listed for both VGA and LVDS, the connectors get combined. Setting the line mux on LVDS to an unused value prevents both encoders from being combined into the same connector. This should fix bko bug 13720. Signed-off-by: Alex Deucher Signed-off-by: Dave Airlie --- drivers/gpu/drm/radeon/radeon_atombios.c | 9 ++++++--- 1 file changed, 6 insertions(+), 3 deletions(-) diff --git a/drivers/gpu/drm/radeon/radeon_atombios.c b/drivers/gpu/drm/radeon/radeon_atombios.c index 1f5a1a49098..fcfe5c02d74 100644 --- a/drivers/gpu/drm/radeon/radeon_atombios.c +++ b/drivers/gpu/drm/radeon/radeon_atombios.c @@ -103,7 +103,8 @@ static inline struct radeon_i2c_bus_rec radeon_lookup_gpio(struct drm_device static bool radeon_atom_apply_quirks(struct drm_device *dev, uint32_t supported_device, int *connector_type, - struct radeon_i2c_bus_rec *i2c_bus) + struct radeon_i2c_bus_rec *i2c_bus, + uint8_t *line_mux) { /* Asus M2A-VM HDMI board lists the DVI port as HDMI */ @@ -127,8 +128,10 @@ static bool radeon_atom_apply_quirks(struct drm_device *dev, if ((dev->pdev->device == 0x5653) && (dev->pdev->subsystem_vendor == 0x1462) && (dev->pdev->subsystem_device == 0x0291)) { - if (*connector_type == DRM_MODE_CONNECTOR_LVDS) + if (*connector_type == DRM_MODE_CONNECTOR_LVDS) { i2c_bus->valid = false; + *line_mux = 53; + } } /* Funky macbooks */ @@ -526,7 +529,7 @@ bool radeon_get_atom_connector_info_from_supported_devices_table(struct if (!radeon_atom_apply_quirks (dev, (1 << i), &bios_connectors[i].connector_type, - &bios_connectors[i].ddc_bus)) + &bios_connectors[i].ddc_bus, &bios_connectors[i].line_mux)) continue; bios_connectors[i].valid = true; -- cgit v1.2.3 From 2007d633d639c896396e4c4b53b38068f3831307 Mon Sep 17 00:00:00 2001 From: Alex Deucher Date: Wed, 8 Jul 2009 16:17:23 -0400 Subject: drm/radeon/kms: get lvds info for DIG LVTMA and UNIPHY encoders MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Noticed by Rafał Miłecki on dri-devel. On r6xx/r7xx hardware, laptop panels can be driven by KLDSCP_LVTMA or UNIPHY. Signed-off-by: Alex Deucher Signed-off-by: Dave Airlie --- drivers/gpu/drm/radeon/radeon_encoders.c | 10 ++++++++-- 1 file changed, 8 insertions(+), 2 deletions(-) diff --git a/drivers/gpu/drm/radeon/radeon_encoders.c b/drivers/gpu/drm/radeon/radeon_encoders.c index c8ef0d14ffa..ea15284e758 100644 --- a/drivers/gpu/drm/radeon/radeon_encoders.c +++ b/drivers/gpu/drm/radeon/radeon_encoders.c @@ -1700,8 +1700,14 @@ radeon_add_atom_encoder(struct drm_device *dev, uint32_t encoder_id, uint32_t su case ENCODER_OBJECT_ID_INTERNAL_KLDSCP_LVTMA: case ENCODER_OBJECT_ID_INTERNAL_UNIPHY1: case ENCODER_OBJECT_ID_INTERNAL_UNIPHY2: - drm_encoder_init(dev, encoder, &radeon_atom_enc_funcs, DRM_MODE_ENCODER_TMDS); - radeon_encoder->enc_priv = radeon_atombios_set_dig_info(radeon_encoder); + if (radeon_encoder->devices & (ATOM_DEVICE_LCD_SUPPORT)) { + radeon_encoder->rmx_type = RMX_FULL; + drm_encoder_init(dev, encoder, &radeon_atom_enc_funcs, DRM_MODE_ENCODER_LVDS); + radeon_encoder->enc_priv = radeon_atombios_get_lvds_info(radeon_encoder); + } else { + drm_encoder_init(dev, encoder, &radeon_atom_enc_funcs, DRM_MODE_ENCODER_TMDS); + radeon_encoder->enc_priv = radeon_atombios_set_dig_info(radeon_encoder); + } drm_encoder_helper_add(encoder, &radeon_atom_dig_helper_funcs); break; } -- cgit v1.2.3 From e7168cab5bbac0a0e5413fd55ba0e92555bf860d Mon Sep 17 00:00:00 2001 From: Dave Airlie Date: Thu, 9 Jul 2009 16:01:42 +1000 Subject: drm/radeon/kms: fix vram vs aper size check. Fix this to be correct like the DDX code, looks like a typo on transfer to the kernel. Signed-off-by: Dave Airlie --- drivers/gpu/drm/radeon/radeon_device.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/gpu/drm/radeon/radeon_device.c b/drivers/gpu/drm/radeon/radeon_device.c index f97563db4e5..332911267eb 100644 --- a/drivers/gpu/drm/radeon/radeon_device.c +++ b/drivers/gpu/drm/radeon/radeon_device.c @@ -552,7 +552,7 @@ int radeon_device_init(struct radeon_device *rdev, * for RN50/M6/M7 - Novell bug 204882 ? */ if (rdev->mc.vram_size < rdev->mc.aper_size) { - rdev->mc.aper_size = rdev->mc.vram_size; + rdev->mc.vram_size = rdev->mc.aper_size; } /* Add an MTRR for the VRAM */ rdev->mc.vram_mtrr = mtrr_add(rdev->mc.aper_base, rdev->mc.aper_size, -- cgit v1.2.3 From 5176fdc4c5873e52f9cb6e166d80e843847e7eb4 Mon Sep 17 00:00:00 2001 From: Dave Airlie Date: Tue, 30 Jun 2009 11:47:14 +1000 Subject: drm/radeon/kms: drop zero length CS indirect buffers. If userspace sends a zero length IB, it really shouldn't have bothered so EINVAL it. Signed-off-by: Dave Airlie --- drivers/gpu/drm/radeon/radeon_cs.c | 8 +++++++- 1 file changed, 7 insertions(+), 1 deletion(-) diff --git a/drivers/gpu/drm/radeon/radeon_cs.c b/drivers/gpu/drm/radeon/radeon_cs.c index b843f9bdfb1..a169067efc4 100644 --- a/drivers/gpu/drm/radeon/radeon_cs.c +++ b/drivers/gpu/drm/radeon/radeon_cs.c @@ -127,17 +127,23 @@ int radeon_cs_parser_init(struct radeon_cs_parser *p, void *data) sizeof(struct drm_radeon_cs_chunk))) { return -EFAULT; } + p->chunks[i].length_dw = user_chunk.length_dw; + p->chunks[i].kdata = NULL; p->chunks[i].chunk_id = user_chunk.chunk_id; + if (p->chunks[i].chunk_id == RADEON_CHUNK_ID_RELOCS) { p->chunk_relocs_idx = i; } if (p->chunks[i].chunk_id == RADEON_CHUNK_ID_IB) { p->chunk_ib_idx = i; + /* zero length IB isn't useful */ + if (p->chunks[i].length_dw == 0) + return -EINVAL; } + p->chunks[i].length_dw = user_chunk.length_dw; cdata = (uint32_t *)(unsigned long)user_chunk.chunk_data; - p->chunks[i].kdata = NULL; size = p->chunks[i].length_dw * sizeof(uint32_t); p->chunks[i].kdata = kzalloc(size, GFP_KERNEL); if (p->chunks[i].kdata == NULL) { -- cgit v1.2.3 From 77bd36f014bc5a3f28507a4e86a81b2b3d2439c3 Mon Sep 17 00:00:00 2001 From: Dave Airlie Date: Fri, 10 Jul 2009 09:33:00 +1000 Subject: drm/radeon/kms: don't swap PCIEGART PTEs in VRAM. On powerpc, since we aren't using any hw swappers, this will get flipped around by default in hw. tested on a G5 + rv515. Signed-off-by: Dave Airlie --- drivers/gpu/drm/radeon/r300.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) diff --git a/drivers/gpu/drm/radeon/r300.c b/drivers/gpu/drm/radeon/r300.c index 656d9238bb0..6435d659cbd 100644 --- a/drivers/gpu/drm/radeon/r300.c +++ b/drivers/gpu/drm/radeon/r300.c @@ -154,7 +154,10 @@ int rv370_pcie_gart_set_page(struct radeon_device *rdev, int i, uint64_t addr) addr = (lower_32_bits(addr) >> 8) | ((upper_32_bits(addr) & 0xff) << 24) | 0xc; - writel(cpu_to_le32(addr), ((void __iomem *)ptr) + (i * 4)); + /* on x86 we want this to be CPU endian, on powerpc + * on powerpc without HW swappers, it'll get swapped on way + * into VRAM - so no need for cpu_to_le32 on VRAM tables */ + writel(addr, ((void __iomem *)ptr) + (i * 4)); return 0; } -- cgit v1.2.3 From 61b576dbbe6a19d102c025ebc102a0749e2d3c80 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Michel=20D=C3=A4nzer?= Date: Wed, 24 Jun 2009 00:12:55 +1000 Subject: drm/radeon: Endianness fixes for radeondrmfb. MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit For now handle it via r/g/b offsets and disallow 16 bpp modes on big endian machines. Signed-off-by: Michel Dänzer Signed-off-by: Dave Airlie --- drivers/gpu/drm/radeon/radeon_fb.c | 53 +++++++++++++++++++++++++++++++++++--- 1 file changed, 50 insertions(+), 3 deletions(-) diff --git a/drivers/gpu/drm/radeon/radeon_fb.c b/drivers/gpu/drm/radeon/radeon_fb.c index 9e8f191eb64..260870a29d8 100644 --- a/drivers/gpu/drm/radeon/radeon_fb.c +++ b/drivers/gpu/drm/radeon/radeon_fb.c @@ -101,9 +101,10 @@ static int radeonfb_setcolreg(unsigned regno, break; case 24: case 32: - fb->pseudo_palette[regno] = ((red & 0xff00) << 8) | - (green & 0xff00) | - ((blue & 0xff00) >> 8); + fb->pseudo_palette[regno] = + (((red >> 8) & 0xff) << info->var.red.offset) | + (((green >> 8) & 0xff) << info->var.green.offset) | + (((blue >> 8) & 0xff) << info->var.blue.offset); break; } } @@ -154,6 +155,7 @@ static int radeonfb_check_var(struct fb_var_screeninfo *var, var->transp.length = 0; var->transp.offset = 0; break; +#ifdef __LITTLE_ENDIAN case 15: var->red.offset = 10; var->green.offset = 5; @@ -194,6 +196,28 @@ static int radeonfb_check_var(struct fb_var_screeninfo *var, var->transp.length = 8; var->transp.offset = 24; break; +#else + case 24: + var->red.offset = 8; + var->green.offset = 16; + var->blue.offset = 24; + var->red.length = 8; + var->green.length = 8; + var->blue.length = 8; + var->transp.length = 0; + var->transp.offset = 0; + break; + case 32: + var->red.offset = 8; + var->green.offset = 16; + var->blue.offset = 24; + var->red.length = 8; + var->green.length = 8; + var->blue.length = 8; + var->transp.length = 8; + var->transp.offset = 0; + break; +#endif default: return -EINVAL; } @@ -600,6 +624,7 @@ int radeonfb_create(struct radeon_device *rdev, info->var.transp.offset = 0; info->var.transp.length = 0; break; +#ifdef __LITTLE_ENDIAN case 15: info->var.red.offset = 10; info->var.green.offset = 5; @@ -639,7 +664,29 @@ int radeonfb_create(struct radeon_device *rdev, info->var.transp.offset = 24; info->var.transp.length = 8; break; +#else + case 24: + info->var.red.offset = 8; + info->var.green.offset = 16; + info->var.blue.offset = 24; + info->var.red.length = 8; + info->var.green.length = 8; + info->var.blue.length = 8; + info->var.transp.offset = 0; + info->var.transp.length = 0; + break; + case 32: + info->var.red.offset = 8; + info->var.green.offset = 16; + info->var.blue.offset = 24; + info->var.red.length = 8; + info->var.green.length = 8; + info->var.blue.length = 8; + info->var.transp.offset = 0; + info->var.transp.length = 8; + break; default: +#endif break; } -- cgit v1.2.3 From ad49f501867cba87e1e45e5ebae0b12435d68bf1 Mon Sep 17 00:00:00 2001 From: Dave Airlie Date: Fri, 10 Jul 2009 22:36:26 +1000 Subject: drm/ttm/radeon: add dma32 support. This add support for using dma32 memory on gpus that really need it. Currently IGPs are left without DMA32 but we might need to change that unless we can fix rs690. Signed-off-by: Dave Airlie --- drivers/gpu/drm/radeon/radeon.h | 1 + drivers/gpu/drm/radeon/radeon_device.c | 17 +++++++++++++++-- drivers/gpu/drm/radeon/radeon_ttm.c | 3 ++- drivers/gpu/drm/ttm/ttm_bo.c | 7 ++++++- drivers/gpu/drm/ttm/ttm_tt.c | 9 +++++++-- include/drm/ttm/ttm_bo_driver.h | 5 ++++- 6 files changed, 35 insertions(+), 7 deletions(-) diff --git a/drivers/gpu/drm/radeon/radeon.h b/drivers/gpu/drm/radeon/radeon.h index e7662ba9abf..3060ce14071 100644 --- a/drivers/gpu/drm/radeon/radeon.h +++ b/drivers/gpu/drm/radeon/radeon.h @@ -624,6 +624,7 @@ struct radeon_device { bool gpu_lockup; bool shutdown; bool suspend; + bool need_dma32; }; int radeon_device_init(struct radeon_device *rdev, diff --git a/drivers/gpu/drm/radeon/radeon_device.c b/drivers/gpu/drm/radeon/radeon_device.c index 332911267eb..27a5ac96995 100644 --- a/drivers/gpu/drm/radeon/radeon_device.c +++ b/drivers/gpu/drm/radeon/radeon_device.c @@ -450,6 +450,7 @@ int radeon_device_init(struct radeon_device *rdev, uint32_t flags) { int r, ret; + int dma_bits; DRM_INFO("radeon: Initializing kernel modesetting.\n"); rdev->shutdown = false; @@ -492,8 +493,20 @@ int radeon_device_init(struct radeon_device *rdev, return r; } - /* Report DMA addressing limitation */ - r = pci_set_dma_mask(rdev->pdev, DMA_BIT_MASK(32)); + /* set DMA mask + need_dma32 flags. + * PCIE - can handle 40-bits. + * IGP - can handle 40-bits (in theory) + * AGP - generally dma32 is safest + * PCI - only dma32 + */ + rdev->need_dma32 = false; + if (rdev->flags & RADEON_IS_AGP) + rdev->need_dma32 = true; + if (rdev->flags & RADEON_IS_PCI) + rdev->need_dma32 = true; + + dma_bits = rdev->need_dma32 ? 32 : 40; + r = pci_set_dma_mask(rdev->pdev, DMA_BIT_MASK(dma_bits)); if (r) { printk(KERN_WARNING "radeon: No suitable DMA available.\n"); } diff --git a/drivers/gpu/drm/radeon/radeon_ttm.c b/drivers/gpu/drm/radeon/radeon_ttm.c index 1227a97f516..4ca9aa9203d 100644 --- a/drivers/gpu/drm/radeon/radeon_ttm.c +++ b/drivers/gpu/drm/radeon/radeon_ttm.c @@ -442,7 +442,8 @@ int radeon_ttm_init(struct radeon_device *rdev) /* No others user of address space so set it to 0 */ r = ttm_bo_device_init(&rdev->mman.bdev, rdev->mman.mem_global_ref.object, - &radeon_bo_driver, DRM_FILE_PAGE_OFFSET); + &radeon_bo_driver, DRM_FILE_PAGE_OFFSET, + rdev->need_dma32); if (r) { DRM_ERROR("failed initializing buffer object driver(%d).\n", r); return r; diff --git a/drivers/gpu/drm/ttm/ttm_bo.c b/drivers/gpu/drm/ttm/ttm_bo.c index a753598a5e3..e55e7972c89 100644 --- a/drivers/gpu/drm/ttm/ttm_bo.c +++ b/drivers/gpu/drm/ttm/ttm_bo.c @@ -224,6 +224,9 @@ static int ttm_bo_add_ttm(struct ttm_buffer_object *bo, bool zero_alloc) TTM_ASSERT_LOCKED(&bo->mutex); bo->ttm = NULL; + if (bdev->need_dma32) + page_flags |= TTM_PAGE_FLAG_DMA32; + switch (bo->type) { case ttm_bo_type_device: if (zero_alloc) @@ -1332,7 +1335,8 @@ EXPORT_SYMBOL(ttm_bo_device_release); int ttm_bo_device_init(struct ttm_bo_device *bdev, struct ttm_mem_global *mem_glob, - struct ttm_bo_driver *driver, uint64_t file_page_offset) + struct ttm_bo_driver *driver, uint64_t file_page_offset, + bool need_dma32) { int ret = -EINVAL; @@ -1369,6 +1373,7 @@ int ttm_bo_device_init(struct ttm_bo_device *bdev, INIT_LIST_HEAD(&bdev->ddestroy); INIT_LIST_HEAD(&bdev->swap_lru); bdev->dev_mapping = NULL; + bdev->need_dma32 = need_dma32; ttm_mem_init_shrink(&bdev->shrink, ttm_bo_swapout); ret = ttm_mem_register_shrink(mem_glob, &bdev->shrink); if (unlikely(ret != 0)) { diff --git a/drivers/gpu/drm/ttm/ttm_tt.c b/drivers/gpu/drm/ttm/ttm_tt.c index 75dc8bd2459..81ab81f030a 100644 --- a/drivers/gpu/drm/ttm/ttm_tt.c +++ b/drivers/gpu/drm/ttm/ttm_tt.c @@ -131,10 +131,15 @@ static void ttm_tt_free_page_directory(struct ttm_tt *ttm) static struct page *ttm_tt_alloc_page(unsigned page_flags) { + gfp_t gfp_flags = GFP_HIGHUSER; + if (page_flags & TTM_PAGE_FLAG_ZERO_ALLOC) - return alloc_page(GFP_HIGHUSER | __GFP_ZERO); + gfp_flags |= __GFP_ZERO; + + if (page_flags & TTM_PAGE_FLAG_DMA32) + gfp_flags |= __GFP_DMA32; - return alloc_page(GFP_HIGHUSER); + return alloc_page(gfp_flags); } static void ttm_tt_free_user_pages(struct ttm_tt *ttm) diff --git a/include/drm/ttm/ttm_bo_driver.h b/include/drm/ttm/ttm_bo_driver.h index 62ed733c52a..ea83dd23a4d 100644 --- a/include/drm/ttm/ttm_bo_driver.h +++ b/include/drm/ttm/ttm_bo_driver.h @@ -121,6 +121,7 @@ struct ttm_backend { #define TTM_PAGE_FLAG_SWAPPED (1 << 4) #define TTM_PAGE_FLAG_PERSISTANT_SWAP (1 << 5) #define TTM_PAGE_FLAG_ZERO_ALLOC (1 << 6) +#define TTM_PAGE_FLAG_DMA32 (1 << 7) enum ttm_caching_state { tt_uncached, @@ -429,6 +430,8 @@ struct ttm_bo_device { */ struct delayed_work wq; + + bool need_dma32; }; /** @@ -648,7 +651,7 @@ extern int ttm_bo_device_release(struct ttm_bo_device *bdev); extern int ttm_bo_device_init(struct ttm_bo_device *bdev, struct ttm_mem_global *mem_glob, struct ttm_bo_driver *driver, - uint64_t file_page_offset); + uint64_t file_page_offset, bool need_dma32); /** * ttm_bo_reserve: -- cgit v1.2.3 From 2a0f8918fc34713ecaeb900ffb9afa61df4cb08e Mon Sep 17 00:00:00 2001 From: Dave Airlie Date: Sat, 11 Jul 2009 04:44:47 +1000 Subject: drm/radeon/kms: fix VRAM sizing like DDX does it. Doing this like the DDX seems like the most sure fire way to avoid having to reinvent it slowly and painfully. At the moment we keep getting things wrong with aper vs vram, so we know the DDX does it right. booted on PCI r100, PCIE rv370, IGP rs400. Signed-off-by: Dave Airlie --- drivers/gpu/drm/radeon/r100.c | 65 ++++++++++++++++++++++++++++++++-- drivers/gpu/drm/radeon/r300.c | 4 +-- drivers/gpu/drm/radeon/r520.c | 4 +-- drivers/gpu/drm/radeon/radeon.h | 2 ++ drivers/gpu/drm/radeon/radeon_device.c | 7 +--- drivers/gpu/drm/radeon/rs400.c | 14 +------- drivers/gpu/drm/radeon/rv515.c | 6 ++-- 7 files changed, 71 insertions(+), 31 deletions(-) diff --git a/drivers/gpu/drm/radeon/r100.c b/drivers/gpu/drm/radeon/r100.c index 154648a2c02..97c9229b929 100644 --- a/drivers/gpu/drm/radeon/r100.c +++ b/drivers/gpu/drm/radeon/r100.c @@ -1360,9 +1360,50 @@ static void r100_vram_get_type(struct radeon_device *rdev) } } -void r100_vram_info(struct radeon_device *rdev) +static u32 r100_get_accessible_vram(struct radeon_device *rdev) { - r100_vram_get_type(rdev); + u32 aper_size; + u8 byte; + + aper_size = RREG32(RADEON_CONFIG_APER_SIZE); + + /* Set HDP_APER_CNTL only on cards that are known not to be broken, + * that is has the 2nd generation multifunction PCI interface + */ + if (rdev->family == CHIP_RV280 || + rdev->family >= CHIP_RV350) { + WREG32_P(RADEON_HOST_PATH_CNTL, RADEON_HDP_APER_CNTL, + ~RADEON_HDP_APER_CNTL); + DRM_INFO("Generation 2 PCI interface, using max accessible memory\n"); + return aper_size * 2; + } + + /* Older cards have all sorts of funny issues to deal with. First + * check if it's a multifunction card by reading the PCI config + * header type... Limit those to one aperture size + */ + pci_read_config_byte(rdev->pdev, 0xe, &byte); + if (byte & 0x80) { + DRM_INFO("Generation 1 PCI interface in multifunction mode\n"); + DRM_INFO("Limiting VRAM to one aperture\n"); + return aper_size; + } + + /* Single function older card. We read HDP_APER_CNTL to see how the BIOS + * have set it up. We don't write this as it's broken on some ASICs but + * we expect the BIOS to have done the right thing (might be too optimistic...) + */ + if (RREG32(RADEON_HOST_PATH_CNTL) & RADEON_HDP_APER_CNTL) + return aper_size * 2; + return aper_size; +} + +void r100_vram_init_sizes(struct radeon_device *rdev) +{ + u64 config_aper_size; + u32 accessible; + + config_aper_size = RREG32(RADEON_CONFIG_APER_SIZE); if (rdev->flags & RADEON_IS_IGP) { uint32_t tom; @@ -1383,10 +1424,30 @@ void r100_vram_info(struct radeon_device *rdev) } /* let driver place VRAM */ rdev->mc.vram_location = 0xFFFFFFFFUL; + /* Fix for RN50, M6, M7 with 8/16/32(??) MBs of VRAM - + * Novell bug 204882 + along with lots of ubuntu ones */ + if (config_aper_size > rdev->mc.vram_size) + rdev->mc.vram_size = config_aper_size; } + /* work out accessible VRAM */ + accessible = r100_get_accessible_vram(rdev); + rdev->mc.aper_base = drm_get_resource_start(rdev->ddev, 0); rdev->mc.aper_size = drm_get_resource_len(rdev->ddev, 0); + + if (accessible > rdev->mc.aper_size) + accessible = rdev->mc.aper_size; + + if (rdev->mc.vram_size > rdev->mc.aper_size) + rdev->mc.vram_size = rdev->mc.aper_size; +} + +void r100_vram_info(struct radeon_device *rdev) +{ + r100_vram_get_type(rdev); + + r100_vram_init_sizes(rdev); } diff --git a/drivers/gpu/drm/radeon/r300.c b/drivers/gpu/drm/radeon/r300.c index 6435d659cbd..0e0e094da50 100644 --- a/drivers/gpu/drm/radeon/r300.c +++ b/drivers/gpu/drm/radeon/r300.c @@ -585,10 +585,8 @@ void r300_vram_info(struct radeon_device *rdev) } else { rdev->mc.vram_width = 64; } - rdev->mc.vram_size = RREG32(RADEON_CONFIG_MEMSIZE); - rdev->mc.aper_base = drm_get_resource_start(rdev->ddev, 0); - rdev->mc.aper_size = drm_get_resource_len(rdev->ddev, 0); + r100_vram_init_sizes(rdev); } diff --git a/drivers/gpu/drm/radeon/r520.c b/drivers/gpu/drm/radeon/r520.c index 570a244bd88..b6bd3758db6 100644 --- a/drivers/gpu/drm/radeon/r520.c +++ b/drivers/gpu/drm/radeon/r520.c @@ -227,8 +227,6 @@ static void r520_vram_get_type(struct radeon_device *rdev) void r520_vram_info(struct radeon_device *rdev) { r520_vram_get_type(rdev); - rdev->mc.vram_size = RREG32(RADEON_CONFIG_MEMSIZE); - rdev->mc.aper_base = drm_get_resource_start(rdev->ddev, 0); - rdev->mc.aper_size = drm_get_resource_len(rdev->ddev, 0); + r100_vram_init_sizes(rdev); } diff --git a/drivers/gpu/drm/radeon/radeon.h b/drivers/gpu/drm/radeon/radeon.h index 3060ce14071..248e3341a98 100644 --- a/drivers/gpu/drm/radeon/radeon.h +++ b/drivers/gpu/drm/radeon/radeon.h @@ -541,6 +541,8 @@ union radeon_asic_config { struct r300_asic r300; }; +/* r100 */ +void r100_vram_init_sizes(struct radeon_device *rdev); /* * IOCTL. diff --git a/drivers/gpu/drm/radeon/radeon_device.c b/drivers/gpu/drm/radeon/radeon_device.c index 27a5ac96995..cdef6eb01ba 100644 --- a/drivers/gpu/drm/radeon/radeon_device.c +++ b/drivers/gpu/drm/radeon/radeon_device.c @@ -561,12 +561,7 @@ int radeon_device_init(struct radeon_device *rdev, } /* Get vram informations */ radeon_vram_info(rdev); - /* Device is severly broken if aper size > vram size. - * for RN50/M6/M7 - Novell bug 204882 ? - */ - if (rdev->mc.vram_size < rdev->mc.aper_size) { - rdev->mc.vram_size = rdev->mc.aper_size; - } + /* Add an MTRR for the VRAM */ rdev->mc.vram_mtrr = mtrr_add(rdev->mc.aper_base, rdev->mc.aper_size, MTRR_TYPE_WRCOMB, 1); diff --git a/drivers/gpu/drm/radeon/rs400.c b/drivers/gpu/drm/radeon/rs400.c index a18d053065c..daf24e85cba 100644 --- a/drivers/gpu/drm/radeon/rs400.c +++ b/drivers/gpu/drm/radeon/rs400.c @@ -292,24 +292,12 @@ void rs400_gpu_init(struct radeon_device *rdev) */ void rs400_vram_info(struct radeon_device *rdev) { - uint32_t tom; - rs400_gart_adjust_size(rdev); /* DDR for all card after R300 & IGP */ rdev->mc.vram_is_ddr = true; rdev->mc.vram_width = 128; - /* read NB_TOM to get the amount of ram stolen for the GPU */ - tom = RREG32(RADEON_NB_TOM); - rdev->mc.vram_size = (((tom >> 16) - (tom & 0xffff) + 1) << 16); - WREG32(RADEON_CONFIG_MEMSIZE, rdev->mc.vram_size); - - /* RS480 IGPs don't seem to translate to main RAM, they - * just reserve and scan out of it. So setting VRAM location - * to say 0, will actually trash the OS. */ - rdev->mc.vram_location = (tom & 0xffff) << 16; - rdev->mc.aper_base = drm_get_resource_start(rdev->ddev, 0); - rdev->mc.aper_size = drm_get_resource_len(rdev->ddev, 0); + r100_vram_init_sizes(rdev); } diff --git a/drivers/gpu/drm/radeon/rv515.c b/drivers/gpu/drm/radeon/rv515.c index d1384d3991a..677929ed8ed 100644 --- a/drivers/gpu/drm/radeon/rv515.c +++ b/drivers/gpu/drm/radeon/rv515.c @@ -395,10 +395,8 @@ static void rv515_vram_get_type(struct radeon_device *rdev) void rv515_vram_info(struct radeon_device *rdev) { rv515_vram_get_type(rdev); - rdev->mc.vram_size = RREG32(RADEON_CONFIG_MEMSIZE); - - rdev->mc.aper_base = drm_get_resource_start(rdev->ddev, 0); - rdev->mc.aper_size = drm_get_resource_len(rdev->ddev, 0); + + r100_vram_init_sizes(rdev); } -- cgit v1.2.3 From b995e4330de0d8b1b8b9e49ce10cc6dc78e2cbba Mon Sep 17 00:00:00 2001 From: Dave Airlie Date: Tue, 14 Jul 2009 02:02:32 +1000 Subject: drm/radeon/kms: block RN50 from using 3D engine. RN50/ES1000 is a cut-down rv100 chip used in the server market. The 3D engine on these is either not there or unverified so refuse any attempt to configure registers on it. Signed-off-by: Dave Airlie --- drivers/gpu/drm/radeon/r100.c | 5 +++++ drivers/gpu/drm/radeon/radeon.h | 2 ++ 2 files changed, 7 insertions(+) diff --git a/drivers/gpu/drm/radeon/r100.c b/drivers/gpu/drm/radeon/r100.c index 97c9229b929..0d05909f03f 100644 --- a/drivers/gpu/drm/radeon/r100.c +++ b/drivers/gpu/drm/radeon/r100.c @@ -973,6 +973,11 @@ static int r100_packet0_check(struct radeon_cs_parser *p, case R300_TX_OFFSET_0+52: case R300_TX_OFFSET_0+56: case R300_TX_OFFSET_0+60: + /* rn50 has no 3D engine so fail on any 3d setup */ + if (ASIC_IS_RN50(p->rdev)) { + DRM_ERROR("attempt to use RN50 3D engine failed\n"); + return -EINVAL; + } r = r100_cs_packet_next_reloc(p, &reloc); if (r) { DRM_ERROR("No reloc for ib[%d]=0x%04X\n", diff --git a/drivers/gpu/drm/radeon/radeon.h b/drivers/gpu/drm/radeon/radeon.h index 248e3341a98..7f007185e7f 100644 --- a/drivers/gpu/drm/radeon/radeon.h +++ b/drivers/gpu/drm/radeon/radeon.h @@ -673,6 +673,8 @@ void r100_pll_errata_after_index(struct radeon_device *rdev); /* * ASICs helpers. */ +#define ASIC_IS_RN50(rdev) ((rdev->pdev->device == 0x515e) || \ + (rdev->pdev->device == 0x5969)) #define ASIC_IS_RV100(rdev) ((rdev->family == CHIP_RV100) || \ (rdev->family == CHIP_RV200) || \ (rdev->family == CHIP_RS100) || \ -- cgit v1.2.3 From d0e275a90a81b37409a0cfbca77581e3d235f5cf Mon Sep 17 00:00:00 2001 From: Alex Deucher Date: Mon, 13 Jul 2009 11:08:18 -0400 Subject: drm/radeon/kms: add PLL flag to prefer frequencies <= the target freq This is needed when using fractional feedback dividers on some IGP chips. Signed-off-by: Alex Deucher Signed-off-by: Dave Airlie --- drivers/gpu/drm/radeon/radeon_display.c | 6 +++++- drivers/gpu/drm/radeon/radeon_mode.h | 1 + 2 files changed, 6 insertions(+), 1 deletion(-) diff --git a/drivers/gpu/drm/radeon/radeon_display.c b/drivers/gpu/drm/radeon/radeon_display.c index 3efcf1a526b..bc312f3d9a0 100644 --- a/drivers/gpu/drm/radeon/radeon_display.c +++ b/drivers/gpu/drm/radeon/radeon_display.c @@ -491,7 +491,11 @@ void radeon_compute_pll(struct radeon_pll *pll, tmp += (uint64_t)pll->reference_freq * 1000 * frac_feedback_div; current_freq = radeon_div(tmp, ref_div * post_div); - error = abs(current_freq - freq); + if (flags & RADEON_PLL_PREFER_CLOSEST_LOWER) { + error = freq - current_freq; + error = error < 0 ? 0xffffffff : error; + } else + error = abs(current_freq - freq); vco_diff = abs(vco - best_vco); if ((best_vco == 0 && error < best_error) || diff --git a/drivers/gpu/drm/radeon/radeon_mode.h b/drivers/gpu/drm/radeon/radeon_mode.h index 86f766e868e..38c1dd08244 100644 --- a/drivers/gpu/drm/radeon/radeon_mode.h +++ b/drivers/gpu/drm/radeon/radeon_mode.h @@ -124,6 +124,7 @@ struct radeon_tmds_pll { #define RADEON_PLL_PREFER_LOW_POST_DIV (1 << 8) #define RADEON_PLL_PREFER_HIGH_POST_DIV (1 << 9) #define RADEON_PLL_USE_FRAC_FB_DIV (1 << 10) +#define RADEON_PLL_PREFER_CLOSEST_LOWER (1 << 11) struct radeon_pll { uint16_t reference_freq; -- cgit v1.2.3 From eb1300bcd70b3bffbefb6ae0eab13a571255ee93 Mon Sep 17 00:00:00 2001 From: Alex Deucher Date: Mon, 13 Jul 2009 11:09:56 -0400 Subject: drm/radeon/kms: enable frac fb divs on rs600/rs690/rs740 Allows us to hit dot clocks much closer, especially on chips with non-27 Mhz reference clocks like most IGP chips. This fixes most flickering and blanking problems with non-exact dot clocks on these chips. Signed-off-by: Alex Deucher Signed-off-by: Dave Airlie --- drivers/gpu/drm/radeon/atombios_crtc.c | 6 ++++++ 1 file changed, 6 insertions(+) diff --git a/drivers/gpu/drm/radeon/atombios_crtc.c b/drivers/gpu/drm/radeon/atombios_crtc.c index c0080cc9bf8..e64a199b5ee 100644 --- a/drivers/gpu/drm/radeon/atombios_crtc.c +++ b/drivers/gpu/drm/radeon/atombios_crtc.c @@ -203,6 +203,12 @@ void atombios_crtc_set_pll(struct drm_crtc *crtc, struct drm_display_mode *mode) if (ASIC_IS_AVIVO(rdev)) { uint32_t ss_cntl; + if ((rdev->family == CHIP_RS600) || + (rdev->family == CHIP_RS690) || + (rdev->family == CHIP_RS740)) + pll_flags |= (RADEON_PLL_USE_FRAC_FB_DIV | + RADEON_PLL_PREFER_CLOSEST_LOWER); + if (ASIC_IS_DCE32(rdev) && mode->clock > 200000) /* range limits??? */ pll_flags |= RADEON_PLL_PREFER_HIGH_FB_DIV; else -- cgit v1.2.3 From c836e862803b2aa2bd9a354e151316d2b42c44ec Mon Sep 17 00:00:00 2001 From: Alex Deucher Date: Mon, 13 Jul 2009 13:51:03 -0400 Subject: drm/radeon/kms: fix hotspot handling on pre-avivo chips Need to adjust CUR_OFFSET for yorigin Signed-off-by: Alex Deucher Signed-off-by: Dave Airlie --- drivers/gpu/drm/radeon/radeon_cursor.c | 9 +++++++-- drivers/gpu/drm/radeon/radeon_mode.h | 1 + 2 files changed, 8 insertions(+), 2 deletions(-) diff --git a/drivers/gpu/drm/radeon/radeon_cursor.c b/drivers/gpu/drm/radeon/radeon_cursor.c index 5f8ce370c4f..b13c79e38bc 100644 --- a/drivers/gpu/drm/radeon/radeon_cursor.c +++ b/drivers/gpu/drm/radeon/radeon_cursor.c @@ -111,9 +111,11 @@ static void radeon_set_cursor(struct drm_crtc *crtc, struct drm_gem_object *obj, if (ASIC_IS_AVIVO(rdev)) WREG32(AVIVO_D1CUR_SURFACE_ADDRESS + radeon_crtc->crtc_offset, gpu_addr); - else + else { + radeon_crtc->legacy_cursor_offset = gpu_addr - radeon_crtc->legacy_display_base_addr; /* offset is from DISP(2)_BASE_ADDRESS */ - WREG32(RADEON_CUR_OFFSET + radeon_crtc->crtc_offset, (gpu_addr-radeon_crtc->legacy_display_base_addr)); + WREG32(RADEON_CUR_OFFSET + radeon_crtc->crtc_offset, radeon_crtc->legacy_cursor_offset); + } } int radeon_crtc_cursor_set(struct drm_crtc *crtc, @@ -245,6 +247,9 @@ int radeon_crtc_cursor_move(struct drm_crtc *crtc, (RADEON_CUR_LOCK | ((xorigin ? 0 : x) << 16) | (yorigin ? 0 : y))); + /* offset is from DISP(2)_BASE_ADDRESS */ + WREG32(RADEON_CUR_OFFSET + radeon_crtc->crtc_offset, (radeon_crtc->legacy_cursor_offset + + (yorigin * 256))); } radeon_lock_cursor(crtc, false); diff --git a/drivers/gpu/drm/radeon/radeon_mode.h b/drivers/gpu/drm/radeon/radeon_mode.h index 38c1dd08244..ba89b59f6e5 100644 --- a/drivers/gpu/drm/radeon/radeon_mode.h +++ b/drivers/gpu/drm/radeon/radeon_mode.h @@ -187,6 +187,7 @@ struct radeon_crtc { int cursor_width; int cursor_height; uint32_t legacy_display_base_addr; + uint32_t legacy_cursor_offset; }; #define RADEON_USE_RMX 1 -- cgit v1.2.3 From 28477fb1ed1a00c67b382ae8f37f35708e3bf5dd Mon Sep 17 00:00:00 2001 From: Dave Kleikamp Date: Wed, 8 Jul 2009 13:46:18 +0000 Subject: powerpc: Fix booke user_disable_single_step() On booke processors, gdb is seeing spurious SIGTRAPs when setting a watchpoint. user_disable_single_step() simply quits when the DAC is non-zero. It should be clearing the DBCR0_IC and DBCR0_BT bits from the dbcr0 register and TIF_SINGLESTEP from the thread flag. Signed-off-by: Dave Kleikamp Signed-off-by: Benjamin Herrenschmidt --- arch/powerpc/kernel/ptrace.c | 17 +++++++++-------- 1 file changed, 9 insertions(+), 8 deletions(-) diff --git a/arch/powerpc/kernel/ptrace.c b/arch/powerpc/kernel/ptrace.c index 9fa2c7dcd05..ef149880c14 100644 --- a/arch/powerpc/kernel/ptrace.c +++ b/arch/powerpc/kernel/ptrace.c @@ -736,15 +736,16 @@ void user_disable_single_step(struct task_struct *task) { struct pt_regs *regs = task->thread.regs; - -#if defined(CONFIG_BOOKE) - /* If DAC then do not single step, skip */ - if (task->thread.dabr) - return; -#endif - if (regs != NULL) { -#if defined(CONFIG_40x) || defined(CONFIG_BOOKE) +#if defined(CONFIG_BOOKE) + /* If DAC don't clear DBCRO_IDM or MSR_DE */ + if (task->thread.dabr) + task->thread.dbcr0 &= ~(DBCR0_IC | DBCR0_BT); + else { + task->thread.dbcr0 &= ~(DBCR0_IC | DBCR0_BT | DBCR0_IDM); + regs->msr &= ~MSR_DE; + } +#elif defined(CONFIG_40x) task->thread.dbcr0 &= ~(DBCR0_IC | DBCR0_BT | DBCR0_IDM); regs->msr &= ~MSR_DE; #else -- cgit v1.2.3 From 0115cb544b0a6709e9cf3de615e150d22e7d9d10 Mon Sep 17 00:00:00 2001 From: Andreas Schwab Date: Fri, 10 Jul 2009 11:17:36 +0000 Subject: powerpc: Fix another bug in move of altivec code to vector.S When moving load_up_altivec to vector.S a typo in a comment caused a thinko setting the wrong variable. Signed-off-by: Andreas Schwab Signed-off-by: Benjamin Herrenschmidt --- arch/powerpc/kernel/vector.S | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/arch/powerpc/kernel/vector.S b/arch/powerpc/kernel/vector.S index ef36cbbc588..ea4d64644d0 100644 --- a/arch/powerpc/kernel/vector.S +++ b/arch/powerpc/kernel/vector.S @@ -80,10 +80,10 @@ _GLOBAL(load_up_altivec) mtvscr vr0 REST_32VRS(0,r4,r5) #ifndef CONFIG_SMP - /* Update last_task_used_math to 'current' */ + /* Update last_task_used_altivec to 'current' */ subi r4,r5,THREAD /* Back to 'current' */ fromreal(r4) - PPC_STL r4,ADDROFF(last_task_used_math)(r3) + PPC_STL r4,ADDROFF(last_task_used_altivec)(r3) #endif /* CONFIG_SMP */ /* restore registers and return */ blr @@ -172,7 +172,7 @@ _GLOBAL(load_up_vsx) oris r12,r12,MSR_VSX@h std r12,_MSR(r1) #ifndef CONFIG_SMP - /* Update last_task_used_math to 'current' */ + /* Update last_task_used_vsx to 'current' */ ld r4,PACACURRENT(r13) std r4,0(r3) #endif /* CONFIG_SMP */ -- cgit v1.2.3 From c8cc452501572d4a81331179b00a9bdd5d2bfada Mon Sep 17 00:00:00 2001 From: Artem Bityutskiy Date: Fri, 10 Jul 2009 16:59:36 +0300 Subject: UBI: gluebi: initialize ubi_num field Do not forget to initialize 'gluebi->ubi_num' because otherwise it will stay 0 even for ubi1 device, and gluebi will open wrong UBI device when 'gluebi_get_device()' is called. Signed-off-by: Artem Bityutskiy --- drivers/mtd/ubi/gluebi.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/mtd/ubi/gluebi.c b/drivers/mtd/ubi/gluebi.c index 95aaac03f93..b5e478fa266 100644 --- a/drivers/mtd/ubi/gluebi.c +++ b/drivers/mtd/ubi/gluebi.c @@ -332,6 +332,7 @@ static int gluebi_create(struct ubi_device_info *di, } gluebi->vol_id = vi->vol_id; + gluebi->ubi_num = vi->ubi_num; mtd->type = MTD_UBIVOLUME; if (!di->ro_mode) mtd->flags = MTD_WRITEABLE; -- cgit v1.2.3 From 3dc948da783e713cd3dc8bbd8f293f8795af8f06 Mon Sep 17 00:00:00 2001 From: Holger Brunck Date: Mon, 13 Jul 2009 16:47:57 +0200 Subject: UBI: fix bug in image sequence number handling This patch fixes a bug in the image seq. number handling in the scanning level. The assignment of the image_seq was incorrect. Signed-off-by: Holger Brunck Signed-off-by: Artem Bityutskiy --- drivers/mtd/ubi/scan.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/mtd/ubi/scan.c b/drivers/mtd/ubi/scan.c index f60895ee0ae..a423131b617 100644 --- a/drivers/mtd/ubi/scan.c +++ b/drivers/mtd/ubi/scan.c @@ -781,7 +781,7 @@ static int process_eb(struct ubi_device *ubi, struct ubi_scan_info *si, return -EINVAL; } - image_seq = be32_to_cpu(ech->ec); + image_seq = be32_to_cpu(ech->image_seq); if (!si->image_seq_set) { ubi->image_seq = image_seq; si->image_seq_set = 1; -- cgit v1.2.3 From 8886f33f25083a47d5fa24ad7b57bb708c5c5403 Mon Sep 17 00:00:00 2001 From: Clemens Ladisch Date: Mon, 13 Jul 2009 13:21:58 +0200 Subject: sound: usb-audio: add workaround for Blue Microphones devices Blue Microphones USB devices have an alternate setting that sends two channels of data to the computer. Unfortunately, the descriptors of that altsetting have a wrong channel setting, which means that any recorded data from such a device has twice the sample rate from what would be expected. This patch adds a workaround to ignore that altsetting. Since these devices have only one actual channel, no data is lost. Signed-off-by: Clemens Ladisch Cc: Signed-off-by: Takashi Iwai --- sound/usb/usbaudio.c | 14 +++++++++++++- 1 file changed, 13 insertions(+), 1 deletion(-) diff --git a/sound/usb/usbaudio.c b/sound/usb/usbaudio.c index c7b902358b7..44b9cdc8a83 100644 --- a/sound/usb/usbaudio.c +++ b/sound/usb/usbaudio.c @@ -2661,7 +2661,7 @@ static int parse_audio_endpoints(struct snd_usb_audio *chip, int iface_no) struct usb_interface_descriptor *altsd; int i, altno, err, stream; int format; - struct audioformat *fp; + struct audioformat *fp = NULL; unsigned char *fmt, *csep; int num; @@ -2734,6 +2734,18 @@ static int parse_audio_endpoints(struct snd_usb_audio *chip, int iface_no) continue; } + /* + * Blue Microphones workaround: The last altsetting is identical + * with the previous one, except for a larger packet size, but + * is actually a mislabeled two-channel setting; ignore it. + */ + if (fmt[4] == 1 && fmt[5] == 2 && altno == 2 && num == 3 && + fp && fp->altsetting == 1 && fp->channels == 1 && + fp->format == SNDRV_PCM_FORMAT_S16_LE && + le16_to_cpu(get_endpoint(alts, 0)->wMaxPacketSize) == + fp->maxpacksize * 2) + continue; + csep = snd_usb_find_desc(alts->endpoint[0].extra, alts->endpoint[0].extralen, NULL, USB_DT_CS_ENDPOINT); /* Creamware Noah has this descriptor after the 2nd endpoint */ if (!csep && altsd->bNumEndpoints >= 2) -- cgit v1.2.3 From cb65c8732a50f8a145d36dbdac026a1789ad1587 Mon Sep 17 00:00:00 2001 From: Jaswinder Singh Rajput Date: Wed, 15 Jul 2009 16:45:40 +0530 Subject: ALSA: riptide - proper handling of pci_register_driver for joystick MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit We need to check returning error for pci_register_driver(&joystick_driver) On failure, we should unregister formerly registered audio drivers This also fixed the compiler warning : CC [M] sound/pci/riptide/riptide.o sound/pci/riptide/riptide.c: In function ‘alsa_card_riptide_init’: sound/pci/riptide/riptide.c:2200: warning: ignoring return value of ‘__pci_register_driver’, declared with attribute warn_unused_result Signed-off-by: Jaswinder Singh Rajput Signed-off-by: Takashi Iwai --- sound/pci/riptide/riptide.c | 7 +++++-- 1 file changed, 5 insertions(+), 2 deletions(-) diff --git a/sound/pci/riptide/riptide.c b/sound/pci/riptide/riptide.c index 235a71e5ac8..b5ca02e2038 100644 --- a/sound/pci/riptide/riptide.c +++ b/sound/pci/riptide/riptide.c @@ -2197,9 +2197,12 @@ static int __init alsa_card_riptide_init(void) if (err < 0) return err; #if defined(SUPPORT_JOYSTICK) - pci_register_driver(&joystick_driver); + err = pci_register_driver(&joystick_driver); + /* On failure unregister formerly registered audio driver */ + if (err < 0) + pci_unregister_driver(&driver); #endif - return 0; + return err; } static void __exit alsa_card_riptide_exit(void) -- cgit v1.2.3 From f7e5cc0c40dff92bad2894153f675c6c542ba2f0 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Lothar=20Wa=C3=9Fmann?= Date: Tue, 14 Jul 2009 23:10:21 +0000 Subject: net/can bugfix: use after free bug in can protocol drivers Fix a use after free bug in can protocol drivers The release functions of the can protocol drivers lack a call to sock_orphan() which leads to referencing freed memory under certain circumstances. This patch fixes a bug reported here: https://lists.berlios.de/pipermail/socketcan-users/2009-July/000985.html Signed-off-by: Lothar Wassmann Acked-by: Oliver Hartkopp Signed-off-by: David S. Miller --- net/can/bcm.c | 3 +++ net/can/raw.c | 3 +++ 2 files changed, 6 insertions(+) diff --git a/net/can/bcm.c b/net/can/bcm.c index 95d7f32643a..1d17e41b892 100644 --- a/net/can/bcm.c +++ b/net/can/bcm.c @@ -1469,6 +1469,9 @@ static int bcm_release(struct socket *sock) bo->ifindex = 0; } + sock_orphan(sk); + sock->sk = NULL; + release_sock(sk); sock_put(sk); diff --git a/net/can/raw.c b/net/can/raw.c index 6aa154e806a..3482546e888 100644 --- a/net/can/raw.c +++ b/net/can/raw.c @@ -306,6 +306,9 @@ static int raw_release(struct socket *sock) ro->bound = 0; ro->count = 0; + sock_orphan(sk); + sock->sk = NULL; + release_sock(sk); sock_put(sk); -- cgit v1.2.3 From b13bb2e9933b9dfa25c81d959d847c843481111e Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Lothar=20Wa=C3=9Fmann?= Date: Tue, 14 Jul 2009 23:12:25 +0000 Subject: net/can: add module alias to can protocol drivers Add appropriate MODULE_ALIAS() to facilitate autoloading of can protocol drivers Signed-off-by: Lothar Wassmann Acked-by: Oliver Hartkopp Signed-off-by: David S. Miller --- net/can/bcm.c | 1 + net/can/raw.c | 1 + 2 files changed, 2 insertions(+) diff --git a/net/can/bcm.c b/net/can/bcm.c index 1d17e41b892..72720c71035 100644 --- a/net/can/bcm.c +++ b/net/can/bcm.c @@ -75,6 +75,7 @@ static __initdata const char banner[] = KERN_INFO MODULE_DESCRIPTION("PF_CAN broadcast manager protocol"); MODULE_LICENSE("Dual BSD/GPL"); MODULE_AUTHOR("Oliver Hartkopp "); +MODULE_ALIAS("can-proto-2"); /* easy access to can_frame payload */ static inline u64 GET_U64(const struct can_frame *cp) diff --git a/net/can/raw.c b/net/can/raw.c index 3482546e888..f4cc44548bd 100644 --- a/net/can/raw.c +++ b/net/can/raw.c @@ -62,6 +62,7 @@ static __initdata const char banner[] = MODULE_DESCRIPTION("PF_CAN raw protocol"); MODULE_LICENSE("Dual BSD/GPL"); MODULE_AUTHOR("Urs Thuermann "); +MODULE_ALIAS("can-proto-1"); #define MASK_ALL 0 -- cgit v1.2.3 From 7447a668a3860b66b3c9db86fdea91e355ba59ac Mon Sep 17 00:00:00 2001 From: Jan Kara Date: Wed, 15 Jul 2009 20:36:08 +0200 Subject: jbd: Fail to load a journal if it is too short Due to on disk corruption, it can happen that journal is too short. Fail to load it in such case so that we don't oops somewhere later. Reported-by: Nageswara R Sastry Signed-off-by: Jan Kara --- fs/jbd/journal.c | 6 ++++++ 1 file changed, 6 insertions(+) diff --git a/fs/jbd/journal.c b/fs/jbd/journal.c index 737f7246a4b..94a64a199a6 100644 --- a/fs/jbd/journal.c +++ b/fs/jbd/journal.c @@ -848,6 +848,12 @@ static int journal_reset(journal_t *journal) first = be32_to_cpu(sb->s_first); last = be32_to_cpu(sb->s_maxlen); + if (first + JFS_MIN_JOURNAL_BLOCKS > last + 1) { + printk(KERN_ERR "JBD: Journal too short (blocks %lu-%lu).\n", + first, last); + journal_fail_superblock(journal); + return -EINVAL; + } journal->j_first = first; journal->j_last = last; -- cgit v1.2.3 From 9eaaa2d5759837402ec5eee13b2a97921808c3eb Mon Sep 17 00:00:00 2001 From: Jan Kara Date: Mon, 13 Jul 2009 20:26:52 +0200 Subject: ext3: Fix truncation of symlinks after failed write Contents of long symlinks is written via standard write methods. So when the write fails, we add inode to orphan list. But symlinks don't have .truncate method defined so nobody properly removes them from the orphan list (both on disk and in memory). Fix this by calling ext3_truncate() directly instead of calling vmtruncate() (which is saner anyway since we don't need anything vmtruncate() does except from calling .truncate in these paths). We also add inode to orphan list only if ext3_can_truncate() is true (currently, it can be false for symlinks when there are no blocks allocated) - otherwise orphan list processing will complain and ext3_truncate() will not remove inode from on-disk orphan list. Signed-off-by: Jan Kara --- fs/ext3/inode.c | 19 ++++++++++--------- 1 file changed, 10 insertions(+), 9 deletions(-) diff --git a/fs/ext3/inode.c b/fs/ext3/inode.c index 5f51fed5c75..4d7da6f6184 100644 --- a/fs/ext3/inode.c +++ b/fs/ext3/inode.c @@ -1193,15 +1193,16 @@ write_begin_failed: * i_size_read because we hold i_mutex. * * Add inode to orphan list in case we crash before truncate - * finishes. + * finishes. Do this only if ext3_can_truncate() agrees so + * that orphan processing code is happy. */ - if (pos + len > inode->i_size) + if (pos + len > inode->i_size && ext3_can_truncate(inode)) ext3_orphan_add(handle, inode); ext3_journal_stop(handle); unlock_page(page); page_cache_release(page); if (pos + len > inode->i_size) - vmtruncate(inode, inode->i_size); + ext3_truncate(inode); } if (ret == -ENOSPC && ext3_should_retry_alloc(inode->i_sb, &retries)) goto retry; @@ -1287,7 +1288,7 @@ static int ext3_ordered_write_end(struct file *file, * There may be allocated blocks outside of i_size because * we failed to copy some data. Prepare for truncate. */ - if (pos + len > inode->i_size) + if (pos + len > inode->i_size && ext3_can_truncate(inode)) ext3_orphan_add(handle, inode); ret2 = ext3_journal_stop(handle); if (!ret) @@ -1296,7 +1297,7 @@ static int ext3_ordered_write_end(struct file *file, page_cache_release(page); if (pos + len > inode->i_size) - vmtruncate(inode, inode->i_size); + ext3_truncate(inode); return ret ? ret : copied; } @@ -1315,14 +1316,14 @@ static int ext3_writeback_write_end(struct file *file, * There may be allocated blocks outside of i_size because * we failed to copy some data. Prepare for truncate. */ - if (pos + len > inode->i_size) + if (pos + len > inode->i_size && ext3_can_truncate(inode)) ext3_orphan_add(handle, inode); ret = ext3_journal_stop(handle); unlock_page(page); page_cache_release(page); if (pos + len > inode->i_size) - vmtruncate(inode, inode->i_size); + ext3_truncate(inode); return ret ? ret : copied; } @@ -1358,7 +1359,7 @@ static int ext3_journalled_write_end(struct file *file, * There may be allocated blocks outside of i_size because * we failed to copy some data. Prepare for truncate. */ - if (pos + len > inode->i_size) + if (pos + len > inode->i_size && ext3_can_truncate(inode)) ext3_orphan_add(handle, inode); EXT3_I(inode)->i_state |= EXT3_STATE_JDATA; if (inode->i_size > EXT3_I(inode)->i_disksize) { @@ -1375,7 +1376,7 @@ static int ext3_journalled_write_end(struct file *file, page_cache_release(page); if (pos + len > inode->i_size) - vmtruncate(inode, inode->i_size); + ext3_truncate(inode); return ret ? ret : copied; } -- cgit v1.2.3 From 1e9fd53b783ea646de3ee09a4574afeb6778d504 Mon Sep 17 00:00:00 2001 From: Jan Kara Date: Wed, 24 Jun 2009 17:31:40 +0200 Subject: jbd: Fix a race between checkpointing code and journal_get_write_access() The following race can happen: CPU1 CPU2 checkpointing code checks the buffer, adds it to an array for writeback do_get_write_access() ... lock_buffer() unlock_buffer() flush_batch() submits the buffer for IO __jbd_journal_file_buffer() So a buffer under writeout is returned from do_get_write_access(). Since the filesystem code relies on the fact that journaled buffers cannot be written out, it does not take the buffer lock and so it can modify buffer while it is under writeout. That can lead to a filesystem corruption if we crash at the right moment. The similar problem can happen with the journal_get_create_access() path. We fix the problem by clearing the buffer dirty bit under buffer_lock even if the buffer is on BJ_None list. Actually, we clear the dirty bit regardless the list the buffer is in and warn about the fact if the buffer is already journalled. Thanks for spotting the problem goes to dingdinghua . Reported-by: dingdinghua Signed-off-by: Jan Kara --- fs/jbd/transaction.c | 68 +++++++++++++++++++++++++++------------------------- 1 file changed, 35 insertions(+), 33 deletions(-) diff --git a/fs/jbd/transaction.c b/fs/jbd/transaction.c index 73242ba7c7b..c03ac11f74b 100644 --- a/fs/jbd/transaction.c +++ b/fs/jbd/transaction.c @@ -489,34 +489,15 @@ void journal_unlock_updates (journal_t *journal) wake_up(&journal->j_wait_transaction_locked); } -/* - * Report any unexpected dirty buffers which turn up. Normally those - * indicate an error, but they can occur if the user is running (say) - * tune2fs to modify the live filesystem, so we need the option of - * continuing as gracefully as possible. # - * - * The caller should already hold the journal lock and - * j_list_lock spinlock: most callers will need those anyway - * in order to probe the buffer's journaling state safely. - */ -static void jbd_unexpected_dirty_buffer(struct journal_head *jh) +static void warn_dirty_buffer(struct buffer_head *bh) { - int jlist; - - /* If this buffer is one which might reasonably be dirty - * --- ie. data, or not part of this journal --- then - * we're OK to leave it alone, but otherwise we need to - * move the dirty bit to the journal's own internal - * JBDDirty bit. */ - jlist = jh->b_jlist; + char b[BDEVNAME_SIZE]; - if (jlist == BJ_Metadata || jlist == BJ_Reserved || - jlist == BJ_Shadow || jlist == BJ_Forget) { - struct buffer_head *bh = jh2bh(jh); - - if (test_clear_buffer_dirty(bh)) - set_buffer_jbddirty(bh); - } + printk(KERN_WARNING + "JBD: Spotted dirty metadata buffer (dev = %s, blocknr = %llu). " + "There's a risk of filesystem corruption in case of system " + "crash.\n", + bdevname(bh->b_bdev, b), (unsigned long long)bh->b_blocknr); } /* @@ -583,14 +564,16 @@ repeat: if (jh->b_next_transaction) J_ASSERT_JH(jh, jh->b_next_transaction == transaction); + warn_dirty_buffer(bh); } /* * In any case we need to clean the dirty flag and we must * do it under the buffer lock to be sure we don't race * with running write-out. */ - JBUFFER_TRACE(jh, "Unexpected dirty buffer"); - jbd_unexpected_dirty_buffer(jh); + JBUFFER_TRACE(jh, "Journalling dirty buffer"); + clear_buffer_dirty(bh); + set_buffer_jbddirty(bh); } unlock_buffer(bh); @@ -826,6 +809,15 @@ int journal_get_create_access(handle_t *handle, struct buffer_head *bh) J_ASSERT_JH(jh, buffer_locked(jh2bh(jh))); if (jh->b_transaction == NULL) { + /* + * Previous journal_forget() could have left the buffer + * with jbddirty bit set because it was being committed. When + * the commit finished, we've filed the buffer for + * checkpointing and marked it dirty. Now we are reallocating + * the buffer so the transaction freeing it must have + * committed and so it's safe to clear the dirty bit. + */ + clear_buffer_dirty(jh2bh(jh)); jh->b_transaction = transaction; /* first access by this transaction */ @@ -1782,8 +1774,13 @@ static int __dispose_buffer(struct journal_head *jh, transaction_t *transaction) if (jh->b_cp_transaction) { JBUFFER_TRACE(jh, "on running+cp transaction"); + /* + * We don't want to write the buffer anymore, clear the + * bit so that we don't confuse checks in + * __journal_file_buffer + */ + clear_buffer_dirty(bh); __journal_file_buffer(jh, transaction, BJ_Forget); - clear_buffer_jbddirty(bh); may_free = 0; } else { JBUFFER_TRACE(jh, "on running transaction"); @@ -2041,12 +2038,17 @@ void __journal_file_buffer(struct journal_head *jh, if (jh->b_transaction && jh->b_jlist == jlist) return; - /* The following list of buffer states needs to be consistent - * with __jbd_unexpected_dirty_buffer()'s handling of dirty - * state. */ - if (jlist == BJ_Metadata || jlist == BJ_Reserved || jlist == BJ_Shadow || jlist == BJ_Forget) { + /* + * For metadata buffers, we track dirty bit in buffer_jbddirty + * instead of buffer_dirty. We should not see a dirty bit set + * here because we clear it in do_get_write_access but e.g. + * tune2fs can modify the sb and set the dirty bit at any time + * so we try to gracefully handle that. + */ + if (buffer_dirty(bh)) + warn_dirty_buffer(bh); if (test_clear_buffer_dirty(bh) || test_clear_buffer_jbddirty(bh)) was_dirty = 1; -- cgit v1.2.3 From 43237b5490e8f2f4679decd660064ff35ce490cc Mon Sep 17 00:00:00 2001 From: Jan Kara Date: Wed, 20 May 2009 18:41:58 +0200 Subject: ext3: Get rid of extenddisksize parameter of ext3_get_blocks_handle() Get rid of extenddisksize parameter of ext3_get_blocks_handle(). This seems to be a relict from some old days and setting disksize in this function does not make much sence. Currently it was set only by ext3_getblk(). Since the parameter has some effect only if create == 1, it is easy to check that the three callers which end up calling ext3_getblk() with create == 1 (ext3_append, ext3_quota_write, ext3_mkdir) do the right thing and set disksize themselves. Signed-off-by: Jan Kara --- fs/ext3/dir.c | 3 +-- fs/ext3/inode.c | 13 +++---------- include/linux/ext3_fs.h | 2 +- 3 files changed, 5 insertions(+), 13 deletions(-) diff --git a/fs/ext3/dir.c b/fs/ext3/dir.c index 3d724a95882..373fa90c796 100644 --- a/fs/ext3/dir.c +++ b/fs/ext3/dir.c @@ -130,8 +130,7 @@ static int ext3_readdir(struct file * filp, struct buffer_head *bh = NULL; map_bh.b_state = 0; - err = ext3_get_blocks_handle(NULL, inode, blk, 1, - &map_bh, 0, 0); + err = ext3_get_blocks_handle(NULL, inode, blk, 1, &map_bh, 0); if (err > 0) { pgoff_t index = map_bh.b_blocknr >> (PAGE_CACHE_SHIFT - inode->i_blkbits); diff --git a/fs/ext3/inode.c b/fs/ext3/inode.c index 4d7da6f6184..b49908a167a 100644 --- a/fs/ext3/inode.c +++ b/fs/ext3/inode.c @@ -788,7 +788,7 @@ err_out: int ext3_get_blocks_handle(handle_t *handle, struct inode *inode, sector_t iblock, unsigned long maxblocks, struct buffer_head *bh_result, - int create, int extend_disksize) + int create) { int err = -EIO; int offsets[4]; @@ -911,13 +911,6 @@ int ext3_get_blocks_handle(handle_t *handle, struct inode *inode, if (!err) err = ext3_splice_branch(handle, inode, iblock, partial, indirect_blks, count); - /* - * i_disksize growing is protected by truncate_mutex. Don't forget to - * protect it if you're about to implement concurrent - * ext3_get_block() -bzzz - */ - if (!err && extend_disksize && inode->i_size > ei->i_disksize) - ei->i_disksize = inode->i_size; mutex_unlock(&ei->truncate_mutex); if (err) goto cleanup; @@ -972,7 +965,7 @@ static int ext3_get_block(struct inode *inode, sector_t iblock, } ret = ext3_get_blocks_handle(handle, inode, iblock, - max_blocks, bh_result, create, 0); + max_blocks, bh_result, create); if (ret > 0) { bh_result->b_size = (ret << inode->i_blkbits); ret = 0; @@ -1005,7 +998,7 @@ struct buffer_head *ext3_getblk(handle_t *handle, struct inode *inode, dummy.b_blocknr = -1000; buffer_trace_init(&dummy.b_history); err = ext3_get_blocks_handle(handle, inode, block, 1, - &dummy, create, 1); + &dummy, create); /* * ext3_get_blocks_handle() returns number of blocks * mapped. 0 in case of a HOLE. diff --git a/include/linux/ext3_fs.h b/include/linux/ext3_fs.h index 634a5e5aba3..7499b366779 100644 --- a/include/linux/ext3_fs.h +++ b/include/linux/ext3_fs.h @@ -874,7 +874,7 @@ struct buffer_head * ext3_getblk (handle_t *, struct inode *, long, int, int *); struct buffer_head * ext3_bread (handle_t *, struct inode *, int, int, int *); int ext3_get_blocks_handle(handle_t *handle, struct inode *inode, sector_t iblock, unsigned long maxblocks, struct buffer_head *bh_result, - int create, int extend_disksize); + int create); extern struct inode *ext3_iget(struct super_block *, unsigned long); extern int ext3_write_inode (struct inode *, int); -- cgit v1.2.3 From 1997660cea28202ece0956cd44f332ac57700138 Mon Sep 17 00:00:00 2001 From: Robin Getz Date: Wed, 17 Jun 2009 15:18:18 +0000 Subject: Blackfin: cleanup code a bit with comments and defines Improve the assembly with a few explanatory comments and use symbolic defines rather than numeric values for bit positions. Signed-off-by: Robin Getz Signed-off-by: Mike Frysinger --- arch/blackfin/mach-common/entry.S | 12 +++++++----- 1 file changed, 7 insertions(+), 5 deletions(-) diff --git a/arch/blackfin/mach-common/entry.S b/arch/blackfin/mach-common/entry.S index 5a4e7c7fd92..fb1795d5be2 100644 --- a/arch/blackfin/mach-common/entry.S +++ b/arch/blackfin/mach-common/entry.S @@ -218,7 +218,7 @@ ENTRY(_ex_single_step) /* Single stepping only a single instruction, so clear the trace * bit here. */ r7 = syscfg; - bitclr (r7, 0); + bitclr (r7, SYSCFG_SSSTEP_P); syscfg = R7; jump _ex_trap_c; @@ -251,7 +251,7 @@ ENTRY(_ex_single_step) if !cc jump _bfin_return_from_exception; r7 = syscfg; - bitclr (r7, 0); + bitclr (r7, SYSCFG_SSSTEP_P); /* Turn off single step */ syscfg = R7; /* Fall through to _bfin_return_from_exception. */ @@ -342,9 +342,11 @@ ENTRY(_ex_trap_c) r6 = retx; [p5 + PDA_RETX] = r6; #endif + /* Save the state of single stepping */ r6 = SYSCFG; [p5 + PDA_SYSCFG] = r6; - BITCLR(r6, 0); + /* Clear it while we handle the exception in IRQ5 mode */ + BITCLR(r6, SYSCFG_SSSTEP_P); SYSCFG = r6; /* Disable all interrupts, but make sure level 5 is enabled so @@ -367,7 +369,7 @@ ENDPROC(_ex_trap_c) * exception. This is a unrecoverable event, so crash. * Note: this cannot be ENTRY() as we jump here with "if cc jump" ... */ -_double_fault: +ENTRY(_double_fault) /* Turn caches & protection off, to ensure we don't get any more * double exceptions */ @@ -872,7 +874,7 @@ ENTRY(_ret_from_exception) raise 15; /* raise evt15 to do signal or reschedule */ 4: r0 = syscfg; - bitclr(r0, 0); + bitclr(r0, SYSCFG_SSSTEP_P); /* Turn off single step */ syscfg = r0; 5: rts; -- cgit v1.2.3 From b2dc0a08845af9d6ea990a1a28d4545998707570 Mon Sep 17 00:00:00 2001 From: Mike Frysinger Date: Sat, 20 Jun 2009 15:36:09 -0400 Subject: Blackfin: drop dead flash_probe call There are no CONFIG_{BLK,CHR}_DEV_FLASH Kconfig options, and there is no flash_probe() function, so not really sure what this code is all about. Seems to be dead code that stretches way back to the start of the Blackfin port. Signed-off-by: Mike Frysinger --- arch/blackfin/kernel/setup.c | 7 ------- 1 file changed, 7 deletions(-) diff --git a/arch/blackfin/kernel/setup.c b/arch/blackfin/kernel/setup.c index 6136c33e919..6e150d9b886 100644 --- a/arch/blackfin/kernel/setup.c +++ b/arch/blackfin/kernel/setup.c @@ -868,13 +868,6 @@ void __init setup_arch(char **cmdline_p) else printk(KERN_CONT "and Disabled\n"); -#if defined(CONFIG_CHR_DEV_FLASH) || defined(CONFIG_BLK_DEV_FLASH) - /* we need to initialize the Flashrom device here since we might - * do things with flash early on in the boot - */ - flash_probe(); -#endif - printk(KERN_INFO "Boot Mode: %i\n", bfin_read_SYSCR() & 0xF); /* Newer parts mirror SWRST bits in SYSCR */ -- cgit v1.2.3 From 976119bc5d2253bb47f3255ee178ce1ee605fd3c Mon Sep 17 00:00:00 2001 From: Graf Yang Date: Wed, 1 Jul 2009 07:05:40 +0000 Subject: Blackfin: update anomaly lists to match latest sheets/usage Signed-off-by: Graf Yang Signed-off-by: Cliff Cai Signed-off-by: Robin Getz Signed-off-by: Mike Frysinger --- arch/blackfin/mach-bf518/include/mach/anomaly.h | 2 ++ arch/blackfin/mach-bf527/include/mach/anomaly.h | 4 +++- arch/blackfin/mach-bf533/include/mach/anomaly.h | 1 + arch/blackfin/mach-bf537/include/mach/anomaly.h | 2 ++ arch/blackfin/mach-bf538/include/mach/anomaly.h | 2 ++ arch/blackfin/mach-bf548/include/mach/anomaly.h | 2 ++ arch/blackfin/mach-bf561/include/mach/anomaly.h | 1 + 7 files changed, 13 insertions(+), 1 deletion(-) diff --git a/arch/blackfin/mach-bf518/include/mach/anomaly.h b/arch/blackfin/mach-bf518/include/mach/anomaly.h index 426e064062a..753ed810e1c 100644 --- a/arch/blackfin/mach-bf518/include/mach/anomaly.h +++ b/arch/blackfin/mach-bf518/include/mach/anomaly.h @@ -82,6 +82,7 @@ #define ANOMALY_05000179 (0) #define ANOMALY_05000182 (0) #define ANOMALY_05000183 (0) +#define ANOMALY_05000189 (0) #define ANOMALY_05000198 (0) #define ANOMALY_05000202 (0) #define ANOMALY_05000215 (0) @@ -117,6 +118,7 @@ #define ANOMALY_05000357 (0) #define ANOMALY_05000362 (1) #define ANOMALY_05000363 (0) +#define ANOMALY_05000364 (0) #define ANOMALY_05000371 (0) #define ANOMALY_05000380 (0) #define ANOMALY_05000386 (0) diff --git a/arch/blackfin/mach-bf527/include/mach/anomaly.h b/arch/blackfin/mach-bf527/include/mach/anomaly.h index 0d63f740616..c438ca89d8c 100644 --- a/arch/blackfin/mach-bf527/include/mach/anomaly.h +++ b/arch/blackfin/mach-bf527/include/mach/anomaly.h @@ -176,6 +176,8 @@ #define ANOMALY_05000443 (1) /* The WURESET Bit in the SYSCR Register is not Functional */ #define ANOMALY_05000445 (1) +/* USB DMA Short Packet Data Corruption */ +#define ANOMALY_05000450 (1) /* BCODE_QUICKBOOT, BCODE_ALLBOOT, and BCODE_FULLBOOT Settings in SYSCR Register Not Functional */ #define ANOMALY_05000451 (1) /* Incorrect Default Hysteresis Setting for RESET, NMI, and BMODE Signals */ @@ -201,6 +203,7 @@ #define ANOMALY_05000179 (0) #define ANOMALY_05000182 (0) #define ANOMALY_05000183 (0) +#define ANOMALY_05000189 (0) #define ANOMALY_05000198 (0) #define ANOMALY_05000202 (0) #define ANOMALY_05000215 (0) @@ -238,6 +241,5 @@ #define ANOMALY_05000412 (0) #define ANOMALY_05000447 (0) #define ANOMALY_05000448 (0) -#define ANOMALY_05000450 (0) #endif diff --git a/arch/blackfin/mach-bf533/include/mach/anomaly.h b/arch/blackfin/mach-bf533/include/mach/anomaly.h index 70a0ad69c61..cd83db2fb1a 100644 --- a/arch/blackfin/mach-bf533/include/mach/anomaly.h +++ b/arch/blackfin/mach-bf533/include/mach/anomaly.h @@ -335,6 +335,7 @@ #define ANOMALY_05000323 (0) #define ANOMALY_05000353 (1) #define ANOMALY_05000362 (1) +#define ANOMALY_05000364 (0) #define ANOMALY_05000380 (0) #define ANOMALY_05000386 (1) #define ANOMALY_05000389 (0) diff --git a/arch/blackfin/mach-bf537/include/mach/anomaly.h b/arch/blackfin/mach-bf537/include/mach/anomaly.h index 57c128cc3b6..e66aa131f51 100644 --- a/arch/blackfin/mach-bf537/include/mach/anomaly.h +++ b/arch/blackfin/mach-bf537/include/mach/anomaly.h @@ -167,6 +167,7 @@ #define ANOMALY_05000179 (0) #define ANOMALY_05000182 (0) #define ANOMALY_05000183 (0) +#define ANOMALY_05000189 (0) #define ANOMALY_05000198 (0) #define ANOMALY_05000202 (0) #define ANOMALY_05000215 (0) @@ -186,6 +187,7 @@ #define ANOMALY_05000353 (1) #define ANOMALY_05000362 (1) #define ANOMALY_05000363 (0) +#define ANOMALY_05000364 (0) #define ANOMALY_05000380 (0) #define ANOMALY_05000386 (1) #define ANOMALY_05000389 (0) diff --git a/arch/blackfin/mach-bf538/include/mach/anomaly.h b/arch/blackfin/mach-bf538/include/mach/anomaly.h index c97acdf85cd..451cf8a82a4 100644 --- a/arch/blackfin/mach-bf538/include/mach/anomaly.h +++ b/arch/blackfin/mach-bf538/include/mach/anomaly.h @@ -137,6 +137,7 @@ #define ANOMALY_05000158 (0) #define ANOMALY_05000171 (0) #define ANOMALY_05000182 (0) +#define ANOMALY_05000189 (0) #define ANOMALY_05000198 (0) #define ANOMALY_05000202 (0) #define ANOMALY_05000215 (0) @@ -160,6 +161,7 @@ #define ANOMALY_05000353 (1) #define ANOMALY_05000362 (1) #define ANOMALY_05000363 (0) +#define ANOMALY_05000364 (0) #define ANOMALY_05000380 (0) #define ANOMALY_05000386 (1) #define ANOMALY_05000389 (0) diff --git a/arch/blackfin/mach-bf548/include/mach/anomaly.h b/arch/blackfin/mach-bf548/include/mach/anomaly.h index 18a4cd24f67..cd040fe0bc5 100644 --- a/arch/blackfin/mach-bf548/include/mach/anomaly.h +++ b/arch/blackfin/mach-bf548/include/mach/anomaly.h @@ -195,6 +195,7 @@ #define ANOMALY_05000179 (0) #define ANOMALY_05000182 (0) #define ANOMALY_05000183 (0) +#define ANOMALY_05000189 (0) #define ANOMALY_05000198 (0) #define ANOMALY_05000202 (0) #define ANOMALY_05000215 (0) @@ -226,6 +227,7 @@ #define ANOMALY_05000323 (0) #define ANOMALY_05000362 (1) #define ANOMALY_05000363 (0) +#define ANOMALY_05000364 (0) #define ANOMALY_05000380 (0) #define ANOMALY_05000400 (0) #define ANOMALY_05000412 (0) diff --git a/arch/blackfin/mach-bf561/include/mach/anomaly.h b/arch/blackfin/mach-bf561/include/mach/anomaly.h index 94b8e277f09..a5312b2d267 100644 --- a/arch/blackfin/mach-bf561/include/mach/anomaly.h +++ b/arch/blackfin/mach-bf561/include/mach/anomaly.h @@ -288,6 +288,7 @@ #define ANOMALY_05000273 (0) #define ANOMALY_05000311 (0) #define ANOMALY_05000353 (1) +#define ANOMALY_05000364 (0) #define ANOMALY_05000380 (0) #define ANOMALY_05000386 (1) #define ANOMALY_05000389 (0) -- cgit v1.2.3 From 0e4edcf0b0f7d96c4be7788b13bee82e4d3ba0ce Mon Sep 17 00:00:00 2001 From: Robin Getz Date: Mon, 22 Jun 2009 20:23:48 +0000 Subject: Blackfin: work around anomaly 05000281 Add missing anomaly workaround for anomaly 05000281 - we can't return to instructions which cause hardware errors otherwise we trigger the error again which means we go into an infinite loop of handling, returning, and retriggering. This work around confuses gdb when the error occurs as the PC will seemed to have moved, so a better long term fix will need to be figured out, but for now this is better than an infinite crash loop. Signed-off-by: Robin Getz Signed-off-by: Mike Frysinger --- arch/blackfin/kernel/traps.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/arch/blackfin/kernel/traps.c b/arch/blackfin/kernel/traps.c index 8a1caf2bb5b..664de56296c 100644 --- a/arch/blackfin/kernel/traps.c +++ b/arch/blackfin/kernel/traps.c @@ -619,7 +619,8 @@ asmlinkage void trap_c(struct pt_regs *fp) force_sig_info(sig, &info, current); } - if (ANOMALY_05000461 && trapnr == VEC_HWERR && !access_ok(VERIFY_READ, fp->pc, 8)) + if ((ANOMALY_05000461 && trapnr == VEC_HWERR && !access_ok(VERIFY_READ, fp->pc, 8)) || + (ANOMALY_05000281 && trapnr == VEC_HWERR)) fp->pc = SAFE_USER_INSTRUCTION; traps_done: -- cgit v1.2.3 From 15627bd35c6f02d159e0cb41d287dcba3a23a135 Mon Sep 17 00:00:00 2001 From: Mike Frysinger Date: Tue, 23 Jun 2009 11:21:34 +0000 Subject: Blackfin: restore exception banner when dumping crash info Previous unification code put the exception banner behind the "is oops" logic when it should have been printed all the time. Signed-off-by: Mike Frysinger --- arch/blackfin/kernel/traps.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) diff --git a/arch/blackfin/kernel/traps.c b/arch/blackfin/kernel/traps.c index 664de56296c..9efac0f2e2c 100644 --- a/arch/blackfin/kernel/traps.c +++ b/arch/blackfin/kernel/traps.c @@ -570,11 +570,12 @@ asmlinkage void trap_c(struct pt_regs *fp) if (kernel_mode_regs(fp) || (current && !current->mm)) { console_verbose(); oops_in_progress = 1; - if (strerror) - verbose_printk(strerror); } if (sig != SIGTRAP) { + if (strerror) + verbose_printk(strerror); + dump_bfin_process(fp); dump_bfin_mem(fp); show_regs(fp); -- cgit v1.2.3 From dc437b1b596e310bb583de3868c3d61a6798c81c Mon Sep 17 00:00:00 2001 From: Robin Getz Date: Fri, 26 Jun 2009 12:23:51 +0000 Subject: Blackfin: fix silent crash when no uClinux MTD filesystem exists Since we need to relocate the attached filesystem with the uClinux MTD map (to handle some anomalies), we need to know its real filesize. If we boot a kernel without a filesystem actually attached, we end up blindly reading and copying garbage (since there is no magic value to detect validity). Often times this results in an early crash and no output. So add a few basic sanity checks before operating on things to catch the majority of cases. Signed-off-by: Robin Getz Signed-off-by: Mike Frysinger --- arch/blackfin/kernel/setup.c | 26 ++++++++++++++++---------- 1 file changed, 16 insertions(+), 10 deletions(-) diff --git a/arch/blackfin/kernel/setup.c b/arch/blackfin/kernel/setup.c index 6e150d9b886..e4d2da7c1c9 100644 --- a/arch/blackfin/kernel/setup.c +++ b/arch/blackfin/kernel/setup.c @@ -568,17 +568,23 @@ static __init void memory_setup(void) # endif /* ANOMALY_05000263 */ # endif /* CONFIG_ROMFS_FS */ - memory_end -= mtd_size; - - if (mtd_size == 0) { - console_init(); - panic("Don't boot kernel without rootfs attached."); + /* Since the default MTD_UCLINUX has no magic number, we just blindly + * read 8 past the end of the kernel's image, and look at it. + * When no image is attached, mtd_size is set to a random number + * Do some basic sanity checks before operating on things + */ + if (mtd_size == 0 || memory_end <= mtd_size) { + pr_emerg("Could not find valid ram mtd attached.\n"); + } else { + memory_end -= mtd_size; + + /* Relocate MTD image to the top of memory after the uncached memory area */ + uclinux_ram_map.phys = memory_mtd_start = memory_end; + uclinux_ram_map.size = mtd_size; + pr_info("Found mtd parition at 0x%p, (len=0x%lx), moving to 0x%p\n", + _end, mtd_size, (void *)memory_mtd_start); + dma_memcpy((void *)uclinux_ram_map.phys, _end, uclinux_ram_map.size); } - - /* Relocate MTD image to the top of memory after the uncached memory area */ - uclinux_ram_map.phys = memory_mtd_start = memory_end; - uclinux_ram_map.size = mtd_size; - dma_memcpy((void *)uclinux_ram_map.phys, _end, uclinux_ram_map.size); #endif /* CONFIG_MTD_UCLINUX */ #if (defined(CONFIG_BFIN_EXTMEM_ICACHEABLE) && ANOMALY_05000263) -- cgit v1.2.3 From 8399a74f61c69c7d233924de3dd314ca0effa16a Mon Sep 17 00:00:00 2001 From: Jie Zhang Date: Sun, 28 Jun 2009 13:19:36 +0000 Subject: Blackfin: fix miscompilation in lshrdi3 The code used in the Blackfin lshrdi3 utilizes gcc constructs. However, the structures declared don't line up with the code gcc generates, so under certain optimizations, we get bad code and things crap out in fun random ways. So rather than trying to maintain different gcc definitions ourselves, just use the ones available in gcclib.h. URL: http://blackfin.uclinux.org/gf/tracker/5286 Signed-off-by: Jie Zhang Signed-off-by: Mike Frysinger --- arch/blackfin/lib/lshrdi3.c | 16 +--------------- 1 file changed, 1 insertion(+), 15 deletions(-) diff --git a/arch/blackfin/lib/lshrdi3.c b/arch/blackfin/lib/lshrdi3.c index 84b9c559222..e57bf6fbdf3 100644 --- a/arch/blackfin/lib/lshrdi3.c +++ b/arch/blackfin/lib/lshrdi3.c @@ -27,21 +27,7 @@ * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA */ -#define BITS_PER_UNIT 8 - -typedef int SItype __attribute__ ((mode(SI))); -typedef unsigned int USItype __attribute__ ((mode(SI))); -typedef int DItype __attribute__ ((mode(DI))); -typedef int word_type __attribute__ ((mode(__word__))); - -struct DIstruct { - SItype high, low; -}; - -typedef union { - struct DIstruct s; - DItype ll; -} DIunion; +#include "gcclib.h" #ifdef CONFIG_ARITHMETIC_OPS_L1 DItype __lshrdi3(DItype u, word_type b)__attribute__((l1_text)); -- cgit v1.2.3 From fb4b5d3a379824d94fd71fc1aa78e9dbcb15b948 Mon Sep 17 00:00:00 2001 From: Mike Frysinger Date: Mon, 29 Jun 2009 14:20:10 -0400 Subject: Blackfin: handle BF561 Core B memory regions better when SMP=n Rather than assume Core B is always run with caches turned on, let people load into any of the on-chip memory regions. It is their business how the SRAM/Cache regions are utilized, so don't prevent them from being able to load into them. Signed-off-by: Mike Frysinger --- arch/blackfin/kernel/process.c | 14 +++++++------- arch/blackfin/mach-bf561/include/mach/mem_map.h | 23 ++++++++++++++++++++++- 2 files changed, 29 insertions(+), 8 deletions(-) diff --git a/arch/blackfin/kernel/process.c b/arch/blackfin/kernel/process.c index 79cad0ac589..9da36bab7cc 100644 --- a/arch/blackfin/kernel/process.c +++ b/arch/blackfin/kernel/process.c @@ -361,7 +361,7 @@ static inline int in_mem_const(unsigned long addr, unsigned long size, unsigned long const_addr, unsigned long const_size) { - return in_mem_const_off(addr, 0, size, const_addr, const_size); + return in_mem_const_off(addr, size, 0, const_addr, const_size); } #define IN_ASYNC(bnum, bctlnum) \ ({ \ @@ -390,13 +390,13 @@ int bfin_mem_access_type(unsigned long addr, unsigned long size) if (in_mem_const(addr, size, L1_DATA_B_START, L1_DATA_B_LENGTH)) return cpu == 0 ? BFIN_MEM_ACCESS_CORE : BFIN_MEM_ACCESS_IDMA; #ifdef COREB_L1_CODE_START - if (in_mem_const(addr, size, COREB_L1_CODE_START, L1_CODE_LENGTH)) + if (in_mem_const(addr, size, COREB_L1_CODE_START, COREB_L1_CODE_LENGTH)) return cpu == 1 ? BFIN_MEM_ACCESS_ITEST : BFIN_MEM_ACCESS_IDMA; if (in_mem_const(addr, size, COREB_L1_SCRATCH_START, L1_SCRATCH_LENGTH)) return cpu == 1 ? BFIN_MEM_ACCESS_CORE_ONLY : -EFAULT; - if (in_mem_const(addr, size, COREB_L1_DATA_A_START, L1_DATA_A_LENGTH)) + if (in_mem_const(addr, size, COREB_L1_DATA_A_START, COREB_L1_DATA_A_LENGTH)) return cpu == 1 ? BFIN_MEM_ACCESS_CORE : BFIN_MEM_ACCESS_IDMA; - if (in_mem_const(addr, size, COREB_L1_DATA_B_START, L1_DATA_B_LENGTH)) + if (in_mem_const(addr, size, COREB_L1_DATA_B_START, COREB_L1_DATA_B_LENGTH)) return cpu == 1 ? BFIN_MEM_ACCESS_CORE : BFIN_MEM_ACCESS_IDMA; #endif if (in_mem_const(addr, size, L2_START, L2_LENGTH)) @@ -472,13 +472,13 @@ int _access_ok(unsigned long addr, unsigned long size) if (in_mem_const_off(addr, size, _ebss_b_l1 - _sdata_b_l1, L1_DATA_B_START, L1_DATA_B_LENGTH)) return 1; #ifdef COREB_L1_CODE_START - if (in_mem_const(addr, size, COREB_L1_CODE_START, L1_CODE_LENGTH)) + if (in_mem_const(addr, size, COREB_L1_CODE_START, COREB_L1_CODE_LENGTH)) return 1; if (in_mem_const(addr, size, COREB_L1_SCRATCH_START, L1_SCRATCH_LENGTH)) return 1; - if (in_mem_const(addr, size, COREB_L1_DATA_A_START, L1_DATA_A_LENGTH)) + if (in_mem_const(addr, size, COREB_L1_DATA_A_START, COREB_L1_DATA_A_LENGTH)) return 1; - if (in_mem_const(addr, size, COREB_L1_DATA_B_START, L1_DATA_B_LENGTH)) + if (in_mem_const(addr, size, COREB_L1_DATA_B_START, COREB_L1_DATA_B_LENGTH)) return 1; #endif if (in_mem_const_off(addr, size, _ebss_l2 - _stext_l2, L2_START, L2_LENGTH)) diff --git a/arch/blackfin/mach-bf561/include/mach/mem_map.h b/arch/blackfin/mach-bf561/include/mach/mem_map.h index a63e15c86d9..5b96ea549a0 100644 --- a/arch/blackfin/mach-bf561/include/mach/mem_map.h +++ b/arch/blackfin/mach-bf561/include/mach/mem_map.h @@ -37,7 +37,6 @@ /* Memory Map for ADSP-BF561 processors */ -#ifdef CONFIG_BF561 #define COREA_L1_CODE_START 0xFFA00000 #define COREA_L1_DATA_A_START 0xFF800000 #define COREA_L1_DATA_B_START 0xFF900000 @@ -74,6 +73,28 @@ #define BFIN_DCACHESIZE (0*1024) #define BFIN_DSUPBANKS 0 #endif /*CONFIG_BFIN_DCACHE*/ + +/* + * If we are in SMP mode, then the cache settings of Core B will match + * the settings of Core A. If we aren't, then we assume Core B is not + * using any cache. This allows the rest of the kernel to work with + * the core in either mode as we are only loading user code into it and + * it is the user's problem to make sure they aren't doing something + * stupid there. + * + * Note that we treat the L1 code region as a contiguous blob to make + * the rest of the kernel simpler. Easier to check one region than a + * bunch of small ones. Again, possible misbehavior here is the fault + * of the user -- don't try to use memory that doesn't exist. + */ +#ifdef CONFIG_SMP +# define COREB_L1_CODE_LENGTH L1_CODE_LENGTH +# define COREB_L1_DATA_A_LENGTH L1_DATA_A_LENGTH +# define COREB_L1_DATA_B_LENGTH L1_DATA_B_LENGTH +#else +# define COREB_L1_CODE_LENGTH 0x14000 +# define COREB_L1_DATA_A_LENGTH 0x8000 +# define COREB_L1_DATA_B_LENGTH 0x8000 #endif /* Level 2 Memory */ -- cgit v1.2.3 From 532f07ca04c6f8ab0555b00cf5d42dc6f72b802f Mon Sep 17 00:00:00 2001 From: Mike Frysinger Date: Mon, 29 Jun 2009 22:45:50 +0000 Subject: Blackfin: fix early_dma_memcpy() handling of busy channels The early logic to locate a free DMA channel and then set it up was broken in a few ways that only manifested itself when we needed to set up more than 2 on chip SRAM regions (most board defaults setup 1 or 2). First, we checked the wrong status register (the destination gets updated, not the source) and second, we did the ssync before rather than after resetting a DMA config register. Signed-off-by: Mike Frysinger --- arch/blackfin/kernel/bfin_dma_5xx.c | 29 ++++++++++++++--------------- 1 file changed, 14 insertions(+), 15 deletions(-) diff --git a/arch/blackfin/kernel/bfin_dma_5xx.c b/arch/blackfin/kernel/bfin_dma_5xx.c index e0bf8cc0690..9f9b8281665 100644 --- a/arch/blackfin/kernel/bfin_dma_5xx.c +++ b/arch/blackfin/kernel/bfin_dma_5xx.c @@ -253,32 +253,31 @@ void __init early_dma_memcpy(void *pdst, const void *psrc, size_t size) BUG_ON(src % 4); BUG_ON(size % 4); - /* Force a sync in case a previous config reset on this channel - * occurred. This is needed so subsequent writes to DMA registers - * are not spuriously lost/corrupted. - */ - __builtin_bfin_ssync(); - src_ch = 0; /* Find an avalible memDMA channel */ while (1) { - if (!src_ch || src_ch == (struct dma_register *)MDMA_S1_NEXT_DESC_PTR) { - dst_ch = (struct dma_register *)MDMA_D0_NEXT_DESC_PTR; - src_ch = (struct dma_register *)MDMA_S0_NEXT_DESC_PTR; - } else { + if (src_ch == (struct dma_register *)MDMA_S0_NEXT_DESC_PTR) { dst_ch = (struct dma_register *)MDMA_D1_NEXT_DESC_PTR; src_ch = (struct dma_register *)MDMA_S1_NEXT_DESC_PTR; + } else { + dst_ch = (struct dma_register *)MDMA_D0_NEXT_DESC_PTR; + src_ch = (struct dma_register *)MDMA_S0_NEXT_DESC_PTR; } - if (!bfin_read16(&src_ch->cfg)) { + if (!bfin_read16(&src_ch->cfg)) + break; + else if (bfin_read16(&dst_ch->irq_status) & DMA_DONE) { + bfin_write16(&src_ch->cfg, 0); break; - } else { - if (bfin_read16(&src_ch->irq_status) & DMA_DONE) - bfin_write16(&src_ch->cfg, 0); } - } + /* Force a sync in case a previous config reset on this channel + * occurred. This is needed so subsequent writes to DMA registers + * are not spuriously lost/corrupted. + */ + __builtin_bfin_ssync(); + /* Destination */ bfin_write32(&dst_ch->start_addr, dst); bfin_write16(&dst_ch->x_count, size >> 2); -- cgit v1.2.3 From 10a5ecd03f9f5c374f954cf50a4f85d73f8ce338 Mon Sep 17 00:00:00 2001 From: Graf Yang Date: Wed, 1 Jul 2009 04:08:01 +0000 Subject: Blackfin: update handling of anomaly 364 (wrong rev id in BF527-0.1) This anomaly only applies to the BF527-0.1, not the BF526-0.1, and not any other revision of the BF527. So make sure we don't go returning 0xffff for other cases. Signed-off-by: Graf Yang Signed-off-by: Mike Frysinger --- arch/blackfin/include/asm/processor.h | 21 +++++++-------------- 1 file changed, 7 insertions(+), 14 deletions(-) diff --git a/arch/blackfin/include/asm/processor.h b/arch/blackfin/include/asm/processor.h index d0be99be830..a36ad8dac06 100644 --- a/arch/blackfin/include/asm/processor.h +++ b/arch/blackfin/include/asm/processor.h @@ -105,23 +105,16 @@ static inline uint32_t __pure bfin_revid(void) /* Always use CHIPID, to work around ANOMALY_05000234 */ uint32_t revid = (bfin_read_CHIPID() & CHIPID_VERSION) >> 28; -#ifdef CONFIG_BF52x - /* ANOMALY_05000357 +#ifdef _BOOTROM_GET_DXE_ADDRESS_TWI + /* + * ANOMALY_05000364 * Incorrect Revision Number in DSPID Register */ - if (revid == 0) - switch (bfin_read16(_BOOTROM_GET_DXE_ADDRESS_TWI)) { - case 0x0010: - revid = 0; - break; - case 0x2796: - revid = 1; - break; - default: - revid = 0xFFFF; - break; - } + if (ANOMALY_05000364 && + bfin_read16(_BOOTROM_GET_DXE_ADDRESS_TWI) == 0x2796) + revid = 1; #endif + return revid; } -- cgit v1.2.3 From f1c717fbf89f5a24d539ecf4baa5d4c3888e3bf9 Mon Sep 17 00:00:00 2001 From: Sonic Zhang Date: Wed, 1 Jul 2009 07:43:23 +0000 Subject: Blackfin: fix wrong CTS inversion The Blackfin serial headers were inverting the CTS value leading to wrong handling of the CTS line which broke CTS/RTS handling completely. Signed-off-by: Sonic Zhang Signed-off-by: Mike Frysinger --- arch/blackfin/mach-bf518/include/mach/bfin_serial_5xx.h | 2 +- arch/blackfin/mach-bf527/include/mach/bfin_serial_5xx.h | 2 +- arch/blackfin/mach-bf533/include/mach/bfin_serial_5xx.h | 2 +- arch/blackfin/mach-bf537/include/mach/bfin_serial_5xx.h | 2 +- arch/blackfin/mach-bf538/include/mach/bfin_serial_5xx.h | 2 +- arch/blackfin/mach-bf561/include/mach/bfin_serial_5xx.h | 2 +- 6 files changed, 6 insertions(+), 6 deletions(-) diff --git a/arch/blackfin/mach-bf518/include/mach/bfin_serial_5xx.h b/arch/blackfin/mach-bf518/include/mach/bfin_serial_5xx.h index 0fb2ce5d840..dbade93395e 100644 --- a/arch/blackfin/mach-bf518/include/mach/bfin_serial_5xx.h +++ b/arch/blackfin/mach-bf518/include/mach/bfin_serial_5xx.h @@ -53,7 +53,7 @@ #define UART_SET_DLAB(uart) do { UART_PUT_LCR(uart, UART_GET_LCR(uart) | DLAB); SSYNC(); } while (0) #define UART_CLEAR_DLAB(uart) do { UART_PUT_LCR(uart, UART_GET_LCR(uart) & ~DLAB); SSYNC(); } while (0) -#define UART_GET_CTS(x) (!gpio_get_value(x->cts_pin)) +#define UART_GET_CTS(x) gpio_get_value(x->cts_pin) #define UART_DISABLE_RTS(x) gpio_set_value(x->rts_pin, 1) #define UART_ENABLE_RTS(x) gpio_set_value(x->rts_pin, 0) #define UART_ENABLE_INTS(x, v) UART_PUT_IER(x, v) diff --git a/arch/blackfin/mach-bf527/include/mach/bfin_serial_5xx.h b/arch/blackfin/mach-bf527/include/mach/bfin_serial_5xx.h index a625659dd67..ebd6cebc1fb 100644 --- a/arch/blackfin/mach-bf527/include/mach/bfin_serial_5xx.h +++ b/arch/blackfin/mach-bf527/include/mach/bfin_serial_5xx.h @@ -53,7 +53,7 @@ #define UART_SET_DLAB(uart) do { UART_PUT_LCR(uart, UART_GET_LCR(uart) | DLAB); SSYNC(); } while (0) #define UART_CLEAR_DLAB(uart) do { UART_PUT_LCR(uart, UART_GET_LCR(uart) & ~DLAB); SSYNC(); } while (0) -#define UART_GET_CTS(x) (!gpio_get_value(x->cts_pin)) +#define UART_GET_CTS(x) gpio_get_value(x->cts_pin) #define UART_DISABLE_RTS(x) gpio_set_value(x->rts_pin, 1) #define UART_ENABLE_RTS(x) gpio_set_value(x->rts_pin, 0) #define UART_ENABLE_INTS(x, v) UART_PUT_IER(x, v) diff --git a/arch/blackfin/mach-bf533/include/mach/bfin_serial_5xx.h b/arch/blackfin/mach-bf533/include/mach/bfin_serial_5xx.h index a3789d7ccf8..4062e24e759 100644 --- a/arch/blackfin/mach-bf533/include/mach/bfin_serial_5xx.h +++ b/arch/blackfin/mach-bf533/include/mach/bfin_serial_5xx.h @@ -53,7 +53,7 @@ #define UART_SET_DLAB(uart) do { UART_PUT_LCR(uart, UART_GET_LCR(uart) | DLAB); SSYNC(); } while (0) #define UART_CLEAR_DLAB(uart) do { UART_PUT_LCR(uart, UART_GET_LCR(uart) & ~DLAB); SSYNC(); } while (0) -#define UART_GET_CTS(x) (!gpio_get_value(x->cts_pin)) +#define UART_GET_CTS(x) gpio_get_value(x->cts_pin) #define UART_DISABLE_RTS(x) gpio_set_value(x->rts_pin, 1) #define UART_ENABLE_RTS(x) gpio_set_value(x->rts_pin, 0) #define UART_ENABLE_INTS(x, v) UART_PUT_IER(x, v) diff --git a/arch/blackfin/mach-bf537/include/mach/bfin_serial_5xx.h b/arch/blackfin/mach-bf537/include/mach/bfin_serial_5xx.h index b86662fb9de..e95d54f9af6 100644 --- a/arch/blackfin/mach-bf537/include/mach/bfin_serial_5xx.h +++ b/arch/blackfin/mach-bf537/include/mach/bfin_serial_5xx.h @@ -53,7 +53,7 @@ #define UART_SET_DLAB(uart) do { UART_PUT_LCR(uart, UART_GET_LCR(uart) | DLAB); SSYNC(); } while (0) #define UART_CLEAR_DLAB(uart) do { UART_PUT_LCR(uart, UART_GET_LCR(uart) & ~DLAB); SSYNC(); } while (0) -#define UART_GET_CTS(x) (!gpio_get_value(x->cts_pin)) +#define UART_GET_CTS(x) gpio_get_value(x->cts_pin) #define UART_DISABLE_RTS(x) gpio_set_value(x->rts_pin, 1) #define UART_ENABLE_RTS(x) gpio_set_value(x->rts_pin, 0) #define UART_ENABLE_INTS(x, v) UART_PUT_IER(x, v) diff --git a/arch/blackfin/mach-bf538/include/mach/bfin_serial_5xx.h b/arch/blackfin/mach-bf538/include/mach/bfin_serial_5xx.h index c536551eb4b..999f239fe1a 100644 --- a/arch/blackfin/mach-bf538/include/mach/bfin_serial_5xx.h +++ b/arch/blackfin/mach-bf538/include/mach/bfin_serial_5xx.h @@ -53,7 +53,7 @@ #define UART_SET_DLAB(uart) do { UART_PUT_LCR(uart, UART_GET_LCR(uart) | DLAB); SSYNC(); } while (0) #define UART_CLEAR_DLAB(uart) do { UART_PUT_LCR(uart, UART_GET_LCR(uart) & ~DLAB); SSYNC(); } while (0) -#define UART_GET_CTS(x) (!gpio_get_value(x->cts_pin)) +#define UART_GET_CTS(x) gpio_get_value(x->cts_pin) #define UART_DISABLE_RTS(x) gpio_set_value(x->rts_pin, 1) #define UART_ENABLE_RTS(x) gpio_set_value(x->rts_pin, 0) #define UART_ENABLE_INTS(x, v) UART_PUT_IER(x, v) diff --git a/arch/blackfin/mach-bf561/include/mach/bfin_serial_5xx.h b/arch/blackfin/mach-bf561/include/mach/bfin_serial_5xx.h index a1b50878553..fd5e8878b8c 100644 --- a/arch/blackfin/mach-bf561/include/mach/bfin_serial_5xx.h +++ b/arch/blackfin/mach-bf561/include/mach/bfin_serial_5xx.h @@ -53,7 +53,7 @@ #define UART_SET_DLAB(uart) do { UART_PUT_LCR(uart, UART_GET_LCR(uart) | DLAB); SSYNC(); } while (0) #define UART_CLEAR_DLAB(uart) do { UART_PUT_LCR(uart, UART_GET_LCR(uart) & ~DLAB); SSYNC(); } while (0) -#define UART_GET_CTS(x) (!gpio_get_value(x->cts_pin)) +#define UART_GET_CTS(x) gpio_get_value(x->cts_pin) #define UART_DISABLE_RTS(x) gpio_set_value(x->rts_pin, 1) #define UART_ENABLE_RTS(x) gpio_set_value(x->rts_pin, 0) #define UART_ENABLE_INTS(x, v) UART_PUT_IER(x, v) -- cgit v1.2.3 From ebd5833327e3fb46eb55553d8f5432b5226bf897 Mon Sep 17 00:00:00 2001 From: Michael Hennerich Date: Thu, 2 Jul 2009 11:00:38 +0000 Subject: Blackfin: fix incomplete renaming of the bfin-twi-lcd driver The sed used to rename the bfin-twi-lcd only replaced the first instance rather than all which led to the resources not being enabled when the driver was built as a module. Signed-off-by: Michael Hennerich Signed-off-by: Mike Frysinger --- arch/blackfin/mach-bf518/boards/ezbrd.c | 2 +- arch/blackfin/mach-bf527/boards/cm_bf527.c | 2 +- arch/blackfin/mach-bf527/boards/ezbrd.c | 2 +- arch/blackfin/mach-bf527/boards/ezkit.c | 2 +- arch/blackfin/mach-bf533/boards/stamp.c | 2 +- arch/blackfin/mach-bf537/boards/stamp.c | 2 +- arch/blackfin/mach-bf548/boards/ezkit.c | 2 +- 7 files changed, 7 insertions(+), 7 deletions(-) diff --git a/arch/blackfin/mach-bf518/boards/ezbrd.c b/arch/blackfin/mach-bf518/boards/ezbrd.c index d9791106be9..809be268e42 100644 --- a/arch/blackfin/mach-bf518/boards/ezbrd.c +++ b/arch/blackfin/mach-bf518/boards/ezbrd.c @@ -534,7 +534,7 @@ static struct platform_device i2c_bfin_twi_device = { #endif static struct i2c_board_info __initdata bfin_i2c_board_info[] = { -#if defined(CONFIG_BFIN_TWI_LCD) || defined(CONFIG_TWI_LCD_MODULE) +#if defined(CONFIG_BFIN_TWI_LCD) || defined(CONFIG_BFIN_TWI_LCD_MODULE) { I2C_BOARD_INFO("pcf8574_lcd", 0x22), }, diff --git a/arch/blackfin/mach-bf527/boards/cm_bf527.c b/arch/blackfin/mach-bf527/boards/cm_bf527.c index f4867ce0c61..b09484f538f 100644 --- a/arch/blackfin/mach-bf527/boards/cm_bf527.c +++ b/arch/blackfin/mach-bf527/boards/cm_bf527.c @@ -793,7 +793,7 @@ static struct platform_device i2c_bfin_twi_device = { #endif static struct i2c_board_info __initdata bfin_i2c_board_info[] = { -#if defined(CONFIG_BFIN_TWI_LCD) || defined(CONFIG_TWI_LCD_MODULE) +#if defined(CONFIG_BFIN_TWI_LCD) || defined(CONFIG_BFIN_TWI_LCD_MODULE) { I2C_BOARD_INFO("pcf8574_lcd", 0x22), .type = "pcf8574_lcd", diff --git a/arch/blackfin/mach-bf527/boards/ezbrd.c b/arch/blackfin/mach-bf527/boards/ezbrd.c index b2f30f06b73..2ad68cd10ae 100644 --- a/arch/blackfin/mach-bf527/boards/ezbrd.c +++ b/arch/blackfin/mach-bf527/boards/ezbrd.c @@ -591,7 +591,7 @@ static struct platform_device i2c_bfin_twi_device = { #endif static struct i2c_board_info __initdata bfin_i2c_board_info[] = { -#if defined(CONFIG_BFIN_TWI_LCD) || defined(CONFIG_TWI_LCD_MODULE) +#if defined(CONFIG_BFIN_TWI_LCD) || defined(CONFIG_BFIN_TWI_LCD_MODULE) { I2C_BOARD_INFO("pcf8574_lcd", 0x22), }, diff --git a/arch/blackfin/mach-bf527/boards/ezkit.c b/arch/blackfin/mach-bf527/boards/ezkit.c index 799a1d1fa89..75e563d3f9d 100644 --- a/arch/blackfin/mach-bf527/boards/ezkit.c +++ b/arch/blackfin/mach-bf527/boards/ezkit.c @@ -858,7 +858,7 @@ static struct platform_device i2c_bfin_twi_device = { #endif static struct i2c_board_info __initdata bfin_i2c_board_info[] = { -#if defined(CONFIG_BFIN_TWI_LCD) || defined(CONFIG_TWI_LCD_MODULE) +#if defined(CONFIG_BFIN_TWI_LCD) || defined(CONFIG_BFIN_TWI_LCD_MODULE) { I2C_BOARD_INFO("pcf8574_lcd", 0x22), }, diff --git a/arch/blackfin/mach-bf533/boards/stamp.c b/arch/blackfin/mach-bf533/boards/stamp.c index a68ade8a3ca..3d743ccaff6 100644 --- a/arch/blackfin/mach-bf533/boards/stamp.c +++ b/arch/blackfin/mach-bf533/boards/stamp.c @@ -453,7 +453,7 @@ static struct i2c_board_info __initdata bfin_i2c_board_info[] = { .irq = 39, }, #endif -#if defined(CONFIG_BFIN_TWI_LCD) || defined(CONFIG_TWI_LCD_MODULE) +#if defined(CONFIG_BFIN_TWI_LCD) || defined(CONFIG_BFIN_TWI_LCD_MODULE) { I2C_BOARD_INFO("pcf8574_lcd", 0x22), }, diff --git a/arch/blackfin/mach-bf537/boards/stamp.c b/arch/blackfin/mach-bf537/boards/stamp.c index c1f76dd2c4e..ab92e42f891 100644 --- a/arch/blackfin/mach-bf537/boards/stamp.c +++ b/arch/blackfin/mach-bf537/boards/stamp.c @@ -1316,7 +1316,7 @@ static struct i2c_board_info __initdata bfin_i2c_board_info[] = { .irq = IRQ_PF5, }, #endif -#if defined(CONFIG_BFIN_TWI_LCD) || defined(CONFIG_TWI_LCD_MODULE) +#if defined(CONFIG_BFIN_TWI_LCD) || defined(CONFIG_BFIN_TWI_LCD_MODULE) { I2C_BOARD_INFO("pcf8574_lcd", 0x22), }, diff --git a/arch/blackfin/mach-bf548/boards/ezkit.c b/arch/blackfin/mach-bf548/boards/ezkit.c index 81f5b95cc36..dc0dd9b2bce 100644 --- a/arch/blackfin/mach-bf548/boards/ezkit.c +++ b/arch/blackfin/mach-bf548/boards/ezkit.c @@ -864,7 +864,7 @@ static struct i2c_board_info __initdata bfin_i2c_board_info0[] = { #if !defined(CONFIG_BF542) /* The BF542 only has 1 TWI */ static struct i2c_board_info __initdata bfin_i2c_board_info1[] = { -#if defined(CONFIG_BFIN_TWI_LCD) || defined(CONFIG_TWI_LCD_MODULE) +#if defined(CONFIG_BFIN_TWI_LCD) || defined(CONFIG_BFIN_TWI_LCD_MODULE) { I2C_BOARD_INFO("pcf8574_lcd", 0x22), }, -- cgit v1.2.3 From 3a920accbb5f88d753ab5a6a47d0dd48b6269f84 Mon Sep 17 00:00:00 2001 From: Robin Getz Date: Mon, 6 Jul 2009 14:29:08 +0000 Subject: Blackfin: drop duplicate runtime checking of anomaly 05000448 We already catch this anomaly at compile time, and the runtime version is such that it ends up checking on all parts rather than just the ones that might actually have it. Signed-off-by: Robin Getz Signed-off-by: Mike Frysinger --- arch/blackfin/kernel/setup.c | 4 ---- 1 file changed, 4 deletions(-) diff --git a/arch/blackfin/kernel/setup.c b/arch/blackfin/kernel/setup.c index e4d2da7c1c9..98c2f79afda 100644 --- a/arch/blackfin/kernel/setup.c +++ b/arch/blackfin/kernel/setup.c @@ -937,10 +937,6 @@ void __init setup_arch(char **cmdline_p) CPU, bfin_revid()); } - /* We can't run on BF548-0.1 due to ANOMALY 05000448 */ - if (bfin_cpuid() == 0x27de && bfin_revid() == 1) - panic("You can't run on this processor due to 05000448"); - printk(KERN_INFO "Blackfin Linux support by http://blackfin.uclinux.org/\n"); printk(KERN_INFO "Processor Speed: %lu MHz core clock and %lu MHz System Clock\n", -- cgit v1.2.3 From ad863a9dc9887330b2ab753323063865c59d8db6 Mon Sep 17 00:00:00 2001 From: Robin Getz Date: Tue, 7 Jul 2009 02:47:14 +0000 Subject: Blackfin: fix handling of IPEND in interrupt context save The interrupt context save logic incorrectly stored the address of the IPEND register rather than its value due to a missing dereference. While we're here, also enable this code for all kernel debugging scenarios and not just when KGDB is enabled. Signed-off-by: Robin Getz Signed-off-by: Mike Frysinger --- arch/blackfin/include/asm/context.S | 7 ++++--- 1 file changed, 4 insertions(+), 3 deletions(-) diff --git a/arch/blackfin/include/asm/context.S b/arch/blackfin/include/asm/context.S index 16561ab18b3..f8a664f022b 100644 --- a/arch/blackfin/include/asm/context.S +++ b/arch/blackfin/include/asm/context.S @@ -223,9 +223,10 @@ [--sp] = RETN; [--sp] = RETE; [--sp] = SEQSTAT; -#ifdef CONFIG_KGDB - r1.l = lo(IPEND); - r1.h = hi(IPEND); +#ifdef CONFIG_DEBUG_KERNEL + p1.l = lo(IPEND); + p1.h = hi(IPEND); + r1 = [p1]; [--sp] = r1; #else [--sp] = r0; /* Skip IPEND as well. */ -- cgit v1.2.3 From 4c94c3e09adba9718218d6e3d35b2dfae81f3911 Mon Sep 17 00:00:00 2001 From: Barry Song Date: Tue, 7 Jul 2009 07:41:50 +0000 Subject: Blackfin: bf537-stamp: fix irq decl for AD7142 The AD7142 add-on card hooks the IRQ line up to PG5, not PF5. Signed-off-by: Barry Song Signed-off-by: Mike Frysinger --- arch/blackfin/mach-bf537/boards/stamp.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/blackfin/mach-bf537/boards/stamp.c b/arch/blackfin/mach-bf537/boards/stamp.c index ab92e42f891..bd656907b8c 100644 --- a/arch/blackfin/mach-bf537/boards/stamp.c +++ b/arch/blackfin/mach-bf537/boards/stamp.c @@ -1313,7 +1313,7 @@ static struct i2c_board_info __initdata bfin_i2c_board_info[] = { #if defined(CONFIG_JOYSTICK_AD7142) || defined(CONFIG_JOYSTICK_AD7142_MODULE) { I2C_BOARD_INFO("ad7142_joystick", 0x2C), - .irq = IRQ_PF5, + .irq = IRQ_PG5, }, #endif #if defined(CONFIG_BFIN_TWI_LCD) || defined(CONFIG_BFIN_TWI_LCD_MODULE) -- cgit v1.2.3 From c03c2a87347b849ec927d7d2ea79a6955e19f492 Mon Sep 17 00:00:00 2001 From: Michael Hennerich Date: Wed, 8 Jul 2009 12:04:43 +0000 Subject: Blackfin: fix bugs in GPIO resume code Change the bfin_gpio_pm_hibernate_restore() function to: 1) AND restored DATA with DIR (not OR) to get correct final state 2) Restore DATA before setting DIR to avoid glitches Signed-off-by: Michael Hennerich Signed-off-by: Mike Frysinger --- arch/blackfin/kernel/bfin_gpio.c | 6 ++---- 1 file changed, 2 insertions(+), 4 deletions(-) diff --git a/arch/blackfin/kernel/bfin_gpio.c b/arch/blackfin/kernel/bfin_gpio.c index beffa00a93c..6b944627137 100644 --- a/arch/blackfin/kernel/bfin_gpio.c +++ b/arch/blackfin/kernel/bfin_gpio.c @@ -686,14 +686,12 @@ void bfin_gpio_pm_hibernate_restore(void) *port_fer[bank] = gpio_bank_saved[bank].fer; #endif gpio_array[bank]->inen = gpio_bank_saved[bank].inen; + gpio_array[bank]->data_set = gpio_bank_saved[bank].data + & gpio_bank_saved[bank].dir; gpio_array[bank]->dir = gpio_bank_saved[bank].dir; gpio_array[bank]->polar = gpio_bank_saved[bank].polar; gpio_array[bank]->edge = gpio_bank_saved[bank].edge; gpio_array[bank]->both = gpio_bank_saved[bank].both; - - gpio_array[bank]->data_set = gpio_bank_saved[bank].data - | gpio_bank_saved[bank].dir; - gpio_array[bank]->maska = gpio_bank_saved[bank].maska; } AWA_DUMMY_READ(maska); -- cgit v1.2.3 From c70c754ff916cedd969a73549799d2167ffefcd6 Mon Sep 17 00:00:00 2001 From: Michael Hennerich Date: Thu, 9 Jul 2009 09:58:52 +0000 Subject: Blackfin: drop per-cpu loops_per_jiffy tracking On Blackfin SMP, a per-cpu loops_per_jiffy is pointless since both cores always run at the same CCLK. In addition, the current implementation has flaws since the main consumer for loops_per_jiffy (asm/delay.h) uses the global kernel loops_per_jiffy and not the per_cpu one. So punt all of the per-cpu handling and go back to the global shared one. Signed-off-by: Michael Hennerich Signed-off-by: Mike Frysinger --- arch/blackfin/include/asm/cpu.h | 1 - arch/blackfin/kernel/setup.c | 7 +++---- arch/blackfin/mach-common/smp.c | 2 +- 3 files changed, 4 insertions(+), 6 deletions(-) diff --git a/arch/blackfin/include/asm/cpu.h b/arch/blackfin/include/asm/cpu.h index 565b8136855..fadfa82f93b 100644 --- a/arch/blackfin/include/asm/cpu.h +++ b/arch/blackfin/include/asm/cpu.h @@ -32,7 +32,6 @@ struct blackfin_cpudata { struct task_struct *idle; unsigned int imemctl; unsigned int dmemctl; - unsigned long loops_per_jiffy; unsigned long dcache_invld_count; unsigned long icache_invld_count; }; diff --git a/arch/blackfin/kernel/setup.c b/arch/blackfin/kernel/setup.c index 98c2f79afda..6225edae488 100644 --- a/arch/blackfin/kernel/setup.c +++ b/arch/blackfin/kernel/setup.c @@ -168,7 +168,6 @@ void __cpuinit bfin_setup_cpudata(unsigned int cpu) struct blackfin_cpudata *cpudata = &per_cpu(cpu_data, cpu); cpudata->idle = current; - cpudata->loops_per_jiffy = loops_per_jiffy; cpudata->imemctl = bfin_read_IMEM_CONTROL(); cpudata->dmemctl = bfin_read_DMEM_CONTROL(); } @@ -1159,9 +1158,9 @@ static int show_cpuinfo(struct seq_file *m, void *v) sclk/1000000, sclk%1000000); seq_printf(m, "bogomips\t: %lu.%02lu\n" "Calibration\t: %lu loops\n", - (cpudata->loops_per_jiffy * HZ) / 500000, - ((cpudata->loops_per_jiffy * HZ) / 5000) % 100, - (cpudata->loops_per_jiffy * HZ)); + (loops_per_jiffy * HZ) / 500000, + ((loops_per_jiffy * HZ) / 5000) % 100, + (loops_per_jiffy * HZ)); /* Check Cache configutation */ switch (cpudata->dmemctl & (1 << DMC0_P | 1 << DMC1_P)) { diff --git a/arch/blackfin/mach-common/smp.c b/arch/blackfin/mach-common/smp.c index 61840059dfa..e6e3429d92b 100644 --- a/arch/blackfin/mach-common/smp.c +++ b/arch/blackfin/mach-common/smp.c @@ -450,7 +450,7 @@ void __init smp_cpus_done(unsigned int max_cpus) unsigned int cpu; for_each_online_cpu(cpu) - bogosum += per_cpu(cpu_data, cpu).loops_per_jiffy; + bogosum += loops_per_jiffy; printk(KERN_INFO "SMP: Total of %d processors activated " "(%lu.%02lu BogoMIPS).\n", -- cgit v1.2.3 From f574a76a3b19848ac61814756716e26f85f2c3f7 Mon Sep 17 00:00:00 2001 From: Robin Getz Date: Thu, 9 Jul 2009 15:11:52 +0000 Subject: Blackfin: work around anomaly 05000189 Similar to anomaly 05000281 but not as bad, we cannot return to the instruction causing a fault otherwise we'll trigger a second false exception. The system can still recover, but it isn't correct. Signed-off-by: Robin Getz Signed-off-by: Mike Frysinger --- arch/blackfin/kernel/traps.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/arch/blackfin/kernel/traps.c b/arch/blackfin/kernel/traps.c index 9efac0f2e2c..bf2b2d1f8ae 100644 --- a/arch/blackfin/kernel/traps.c +++ b/arch/blackfin/kernel/traps.c @@ -621,7 +621,8 @@ asmlinkage void trap_c(struct pt_regs *fp) } if ((ANOMALY_05000461 && trapnr == VEC_HWERR && !access_ok(VERIFY_READ, fp->pc, 8)) || - (ANOMALY_05000281 && trapnr == VEC_HWERR)) + (ANOMALY_05000281 && trapnr == VEC_HWERR) || + (ANOMALY_05000189 && (trapnr == VEC_CPLB_I_VL || trapnr == VEC_CPLB_VL))) fp->pc = SAFE_USER_INSTRUCTION; traps_done: -- cgit v1.2.3 From 5bc6e3cfe6db5f33c60f042a9ba203431f334756 Mon Sep 17 00:00:00 2001 From: Graf Yang Date: Fri, 10 Jul 2009 11:34:51 +0000 Subject: Blackfin: add CPLB entries for Core B on-chip L1 SRAM regions The Blackfin SMP port was missing CPLB entries for Core B on-chip L1 SRAM regions. Any code that attempted to use these would wrongly crash due to a CPLB miss. Signed-off-by: Graf Yang Signed-off-by: Mike Frysinger --- arch/blackfin/kernel/cplb-nompu/cplbinit.c | 23 +++++++++++++++++------ 1 file changed, 17 insertions(+), 6 deletions(-) diff --git a/arch/blackfin/kernel/cplb-nompu/cplbinit.c b/arch/blackfin/kernel/cplb-nompu/cplbinit.c index d6c067782e6..685f160a5a3 100644 --- a/arch/blackfin/kernel/cplb-nompu/cplbinit.c +++ b/arch/blackfin/kernel/cplb-nompu/cplbinit.c @@ -72,13 +72,24 @@ void __init generate_cplb_tables_cpu(unsigned int cpu) } /* Cover L1 memory. One 4M area for code and data each is enough. */ - if (L1_DATA_A_LENGTH || L1_DATA_B_LENGTH) { - d_tbl[i_d].addr = L1_DATA_A_START; - d_tbl[i_d++].data = L1_DMEMORY | PAGE_SIZE_4MB; + if (cpu == 0) { + if (L1_DATA_A_LENGTH || L1_DATA_B_LENGTH) { + d_tbl[i_d].addr = L1_DATA_A_START; + d_tbl[i_d++].data = L1_DMEMORY | PAGE_SIZE_4MB; + } + i_tbl[i_i].addr = L1_CODE_START; + i_tbl[i_i++].data = L1_IMEMORY | PAGE_SIZE_4MB; } - i_tbl[i_i].addr = L1_CODE_START; - i_tbl[i_i++].data = L1_IMEMORY | PAGE_SIZE_4MB; - +#ifdef CONFIG_SMP + else { + if (L1_DATA_A_LENGTH || L1_DATA_B_LENGTH) { + d_tbl[i_d].addr = COREB_L1_DATA_A_START; + d_tbl[i_d++].data = L1_DMEMORY | PAGE_SIZE_4MB; + } + i_tbl[i_i].addr = COREB_L1_CODE_START; + i_tbl[i_i++].data = L1_IMEMORY | PAGE_SIZE_4MB; + } +#endif first_switched_dcplb = i_d; first_switched_icplb = i_i; -- cgit v1.2.3 From 994e9a2e01f47f7ce24dec7edc45d70401468370 Mon Sep 17 00:00:00 2001 From: Julia Lawall Date: Tue, 14 Jul 2009 03:15:19 +0000 Subject: arch/blackfin: Add kmalloc NULL tests Check that the result of kmalloc is not NULL before passing it to other functions. In the first two cases, the new code returns -ENOMEM, which seems compatible with what is done for similar functions for other architectures. In the last two cases, the new code fails silently, ie just returns, because the function has void return type. The semantic match that finds this problem is as follows: (http://www.emn.fr/x-info/coccinelle/) // @@ expression *x; identifier f; constant char *C; @@ x = \(kmalloc\|kcalloc\|kzalloc\)(...); ... when != x == NULL when != x != NULL when != (x || ...) ( kfree(x) | f(...,C,...,x,...) | *f(...,x,...) | *x->f ) // Signed-off-by: Julia Lawall Signed-off-by: Sonic Zhang Signed-off-by: Mike Frysinger --- arch/blackfin/mach-common/smp.c | 8 ++++++++ 1 file changed, 8 insertions(+) diff --git a/arch/blackfin/mach-common/smp.c b/arch/blackfin/mach-common/smp.c index e6e3429d92b..349ee3f5466 100644 --- a/arch/blackfin/mach-common/smp.c +++ b/arch/blackfin/mach-common/smp.c @@ -211,6 +211,8 @@ int smp_call_function(void (*func)(void *info), void *info, int wait) return 0; msg = kmalloc(sizeof(*msg), GFP_ATOMIC); + if (!msg) + return -ENOMEM; INIT_LIST_HEAD(&msg->list); msg->call_struct.func = func; msg->call_struct.info = info; @@ -252,6 +254,8 @@ int smp_call_function_single(int cpuid, void (*func) (void *info), void *info, cpu_set(cpu, callmap); msg = kmalloc(sizeof(*msg), GFP_ATOMIC); + if (!msg) + return -ENOMEM; INIT_LIST_HEAD(&msg->list); msg->call_struct.func = func; msg->call_struct.info = info; @@ -287,6 +291,8 @@ void smp_send_reschedule(int cpu) return; msg = kmalloc(sizeof(*msg), GFP_ATOMIC); + if (!msg) + return; memset(msg, 0, sizeof(msg)); INIT_LIST_HEAD(&msg->list); msg->type = BFIN_IPI_RESCHEDULE; @@ -314,6 +320,8 @@ void smp_send_stop(void) return; msg = kmalloc(sizeof(*msg), GFP_ATOMIC); + if (!msg) + return; memset(msg, 0, sizeof(msg)); INIT_LIST_HEAD(&msg->list); msg->type = BFIN_IPI_CPU_STOP; -- cgit v1.2.3 From aa6a03eb0ae859c1371555ef381de4c96ca1e4e6 Mon Sep 17 00:00:00 2001 From: Patrick McHardy Date: Thu, 16 Jul 2009 14:01:54 +0200 Subject: netfilter: xt_osf: fix nf_log_packet() arguments The first argument is the address family, the second one the hook number. Signed-off-by: Patrick McHardy --- net/netfilter/xt_osf.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) diff --git a/net/netfilter/xt_osf.c b/net/netfilter/xt_osf.c index 863e40977a4..0f482e2440b 100644 --- a/net/netfilter/xt_osf.c +++ b/net/netfilter/xt_osf.c @@ -330,7 +330,8 @@ static bool xt_osf_match_packet(const struct sk_buff *skb, fcount++; if (info->flags & XT_OSF_LOG) - nf_log_packet(p->hooknum, 0, skb, p->in, p->out, NULL, + nf_log_packet(p->family, p->hooknum, skb, + p->in, p->out, NULL, "%s [%s:%s] : %pi4:%d -> %pi4:%d hops=%d\n", f->genre, f->version, f->subtype, &ip->saddr, ntohs(tcp->source), @@ -345,7 +346,7 @@ static bool xt_osf_match_packet(const struct sk_buff *skb, rcu_read_unlock(); if (!fcount && (info->flags & XT_OSF_LOG)) - nf_log_packet(p->hooknum, 0, skb, p->in, p->out, NULL, + nf_log_packet(p->family, p->hooknum, skb, p->in, p->out, NULL, "Remote OS is not known: %pi4:%u -> %pi4:%u\n", &ip->saddr, ntohs(tcp->source), &ip->daddr, ntohs(tcp->dest)); -- cgit v1.2.3 From 941297f443f871b8c3372feccf27a8733f6ce9e9 Mon Sep 17 00:00:00 2001 From: Eric Dumazet Date: Thu, 16 Jul 2009 14:03:40 +0200 Subject: netfilter: nf_conntrack: nf_conntrack_alloc() fixes When a slab cache uses SLAB_DESTROY_BY_RCU, we must be careful when allocating objects, since slab allocator could give a freed object still used by lockless readers. In particular, nf_conntrack RCU lookups rely on ct->tuplehash[xxx].hnnode.next being always valid (ie containing a valid 'nulls' value, or a valid pointer to next object in hash chain.) kmem_cache_zalloc() setups object with NULL values, but a NULL value is not valid for ct->tuplehash[xxx].hnnode.next. Fix is to call kmem_cache_alloc() and do the zeroing ourself. As spotted by Patrick, we also need to make sure lookup keys are committed to memory before setting refcount to 1, or a lockless reader could get a reference on the old version of the object. Its key re-check could then pass the barrier. Signed-off-by: Eric Dumazet Signed-off-by: Patrick McHardy --- Documentation/RCU/rculist_nulls.txt | 7 ++++++- net/netfilter/nf_conntrack_core.c | 21 ++++++++++++++++++--- 2 files changed, 24 insertions(+), 4 deletions(-) diff --git a/Documentation/RCU/rculist_nulls.txt b/Documentation/RCU/rculist_nulls.txt index 93cb28d05dc..18f9651ff23 100644 --- a/Documentation/RCU/rculist_nulls.txt +++ b/Documentation/RCU/rculist_nulls.txt @@ -83,11 +83,12 @@ not detect it missed following items in original chain. obj = kmem_cache_alloc(...); lock_chain(); // typically a spin_lock() obj->key = key; -atomic_inc(&obj->refcnt); /* * we need to make sure obj->key is updated before obj->next + * or obj->refcnt */ smp_wmb(); +atomic_set(&obj->refcnt, 1); hlist_add_head_rcu(&obj->obj_node, list); unlock_chain(); // typically a spin_unlock() @@ -159,6 +160,10 @@ out: obj = kmem_cache_alloc(cachep); lock_chain(); // typically a spin_lock() obj->key = key; +/* + * changes to obj->key must be visible before refcnt one + */ +smp_wmb(); atomic_set(&obj->refcnt, 1); /* * insert obj in RCU way (readers might be traversing chain) diff --git a/net/netfilter/nf_conntrack_core.c b/net/netfilter/nf_conntrack_core.c index 7508f11c5b3..b5869b9574b 100644 --- a/net/netfilter/nf_conntrack_core.c +++ b/net/netfilter/nf_conntrack_core.c @@ -561,23 +561,38 @@ struct nf_conn *nf_conntrack_alloc(struct net *net, } } - ct = kmem_cache_zalloc(nf_conntrack_cachep, gfp); + /* + * Do not use kmem_cache_zalloc(), as this cache uses + * SLAB_DESTROY_BY_RCU. + */ + ct = kmem_cache_alloc(nf_conntrack_cachep, gfp); if (ct == NULL) { pr_debug("nf_conntrack_alloc: Can't alloc conntrack.\n"); atomic_dec(&net->ct.count); return ERR_PTR(-ENOMEM); } - + /* + * Let ct->tuplehash[IP_CT_DIR_ORIGINAL].hnnode.next + * and ct->tuplehash[IP_CT_DIR_REPLY].hnnode.next unchanged. + */ + memset(&ct->tuplehash[IP_CT_DIR_MAX], 0, + sizeof(*ct) - offsetof(struct nf_conn, tuplehash[IP_CT_DIR_MAX])); spin_lock_init(&ct->lock); - atomic_set(&ct->ct_general.use, 1); ct->tuplehash[IP_CT_DIR_ORIGINAL].tuple = *orig; + ct->tuplehash[IP_CT_DIR_ORIGINAL].hnnode.pprev = NULL; ct->tuplehash[IP_CT_DIR_REPLY].tuple = *repl; + ct->tuplehash[IP_CT_DIR_REPLY].hnnode.pprev = NULL; /* Don't set timer yet: wait for confirmation */ setup_timer(&ct->timeout, death_by_timeout, (unsigned long)ct); #ifdef CONFIG_NET_NS ct->ct_net = net; #endif + /* + * changes to lookup keys must be done before setting refcnt to 1 + */ + smp_wmb(); + atomic_set(&ct->ct_general.use, 1); return ct; } EXPORT_SYMBOL_GPL(nf_conntrack_alloc); -- cgit v1.2.3 From 4a21b8cb3550f19f838f7c48345fbbf6a0e8536b Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Thu, 16 Jul 2009 09:14:23 -0700 Subject: Revert "ppp: Fix throttling bugs" This reverts commit a6540f731d506d9e82444cf0020e716613d4c46c, as requested by Alan: "... as it was wrong, the pty code is now fixed and the fact this isn't reverted is breaking pptp setups." Requested-by: Alan Cox Signed-off-by: Linus Torvalds --- drivers/net/ppp_async.c | 1 + drivers/net/ppp_synctty.c | 1 + 2 files changed, 2 insertions(+) diff --git a/drivers/net/ppp_async.c b/drivers/net/ppp_async.c index 17c116bb332..6de8399d6dd 100644 --- a/drivers/net/ppp_async.c +++ b/drivers/net/ppp_async.c @@ -356,6 +356,7 @@ ppp_asynctty_receive(struct tty_struct *tty, const unsigned char *buf, if (!skb_queue_empty(&ap->rqueue)) tasklet_schedule(&ap->tsk); ap_put(ap); + tty_unthrottle(tty); } static void diff --git a/drivers/net/ppp_synctty.c b/drivers/net/ppp_synctty.c index aa3d39f38e2..d2fa2db1358 100644 --- a/drivers/net/ppp_synctty.c +++ b/drivers/net/ppp_synctty.c @@ -397,6 +397,7 @@ ppp_sync_receive(struct tty_struct *tty, const unsigned char *buf, if (!skb_queue_empty(&ap->rqueue)) tasklet_schedule(&ap->tsk); sp_put(ap); + tty_unthrottle(tty); } static void -- cgit v1.2.3 From a3ca86aea507904148870946d599e07a340b39bf Mon Sep 17 00:00:00 2001 From: Eugene Teo Date: Wed, 15 Jul 2009 14:59:10 +0800 Subject: Add '-fno-delete-null-pointer-checks' to gcc CFLAGS Turning on this flag could prevent the compiler from optimising away some "useless" checks for null pointers. Such bugs can sometimes become exploitable at compile time because of the -O2 optimisation. See http://gcc.gnu.org/onlinedocs/gcc-4.1.2/gcc/Optimize-Options.html An example that clearly shows this 'problem' is commit 6bf67672. static void __devexit agnx_pci_remove(struct pci_dev *pdev) { struct ieee80211_hw *dev = pci_get_drvdata(pdev); - struct agnx_priv *priv = dev->priv; + struct agnx_priv *priv; AGNX_TRACE; if (!dev) return; + priv = dev->priv; By reverting this patch, and compile it with and without -fno-delete-null-pointer-checks flag, we can see that the check for dev is compiled away. call printk # - testq %r12, %r12 # dev - je .L94 #, movq %r12, %rdi # dev, Clearly the 'fix' is to stop using dev before it is tested, but building with -fno-delete-null-pointer-checks flag at least makes it harder to abuse. Signed-off-by: Eugene Teo Acked-by: Eric Paris Acked-by: Wang Cong Signed-off-by: Linus Torvalds --- Makefile | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/Makefile b/Makefile index be0abacd042..79957b33877 100644 --- a/Makefile +++ b/Makefile @@ -343,7 +343,8 @@ KBUILD_CPPFLAGS := -D__KERNEL__ KBUILD_CFLAGS := -Wall -Wundef -Wstrict-prototypes -Wno-trigraphs \ -fno-strict-aliasing -fno-common \ -Werror-implicit-function-declaration \ - -Wno-format-security + -Wno-format-security \ + -fno-delete-null-pointer-checks KBUILD_AFLAGS := -D__ASSEMBLY__ # Read KERNELRELEASE from include/config/kernel.release (if it exists) -- cgit v1.2.3 From c8d50041734534e0a4b0ea13df36ed5857fccd56 Mon Sep 17 00:00:00 2001 From: Alan Cox Date: Thu, 16 Jul 2009 16:05:08 +0100 Subject: tty: fix close/hangup race We can get a situation where a hangup occurs during or after a close. In that case the ldisc gets disposed of by the close and the hangup then explodes. Signed-off-by: Alan Cox Signed-off-by: Linus Torvalds --- drivers/char/tty_ldisc.c | 25 +++++++++++++++---------- 1 file changed, 15 insertions(+), 10 deletions(-) diff --git a/drivers/char/tty_ldisc.c b/drivers/char/tty_ldisc.c index 0ef0dc97ba2..acd76b767d4 100644 --- a/drivers/char/tty_ldisc.c +++ b/drivers/char/tty_ldisc.c @@ -790,17 +790,20 @@ void tty_ldisc_hangup(struct tty_struct *tty) * N_TTY. */ if (tty->driver->flags & TTY_DRIVER_RESET_TERMIOS) { - /* Avoid racing set_ldisc */ + /* Avoid racing set_ldisc or tty_ldisc_release */ mutex_lock(&tty->ldisc_mutex); - /* Switch back to N_TTY */ - tty_ldisc_halt(tty); - tty_ldisc_wait_idle(tty); - tty_ldisc_reinit(tty); - /* At this point we have a closed ldisc and we want to - reopen it. We could defer this to the next open but - it means auditing a lot of other paths so this is a FIXME */ - WARN_ON(tty_ldisc_open(tty, tty->ldisc)); - tty_ldisc_enable(tty); + if (tty->ldisc) { /* Not yet closed */ + /* Switch back to N_TTY */ + tty_ldisc_halt(tty); + tty_ldisc_wait_idle(tty); + tty_ldisc_reinit(tty); + /* At this point we have a closed ldisc and we want to + reopen it. We could defer this to the next open but + it means auditing a lot of other paths so this is + a FIXME */ + WARN_ON(tty_ldisc_open(tty, tty->ldisc)); + tty_ldisc_enable(tty); + } mutex_unlock(&tty->ldisc_mutex); tty_reset_termios(tty); } @@ -865,6 +868,7 @@ void tty_ldisc_release(struct tty_struct *tty, struct tty_struct *o_tty) tty_ldisc_wait_idle(tty); + mutex_lock(&tty->ldisc_mutex); /* * Now kill off the ldisc */ @@ -875,6 +879,7 @@ void tty_ldisc_release(struct tty_struct *tty, struct tty_struct *o_tty) /* Ensure the next open requests the N_TTY ldisc */ tty_set_termios_ldisc(tty, N_TTY); + mutex_unlock(&tty->ldisc_mutex); /* This will need doing differently if we need to lock */ if (o_tty) -- cgit v1.2.3 From 8f4256b22c554f713ffdd395c1f2bfd53746cfc9 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Uwe=20Kleine-K=C3=B6nig?= Date: Thu, 16 Jul 2009 16:05:43 +0100 Subject: serial: don't add msm_serial's probe function to the driver struct MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit msm_serial_driver is registered using platform_driver_probe which takes care for the probe function itself. So don't pass it in the driver struct, too. Signed-off-by: Uwe Kleine-König Signed-off-by: Alan Cox Signed-off-by: Linus Torvalds --- drivers/serial/msm_serial.c | 1 - 1 file changed, 1 deletion(-) diff --git a/drivers/serial/msm_serial.c b/drivers/serial/msm_serial.c index 698048f64f5..f7c24baa141 100644 --- a/drivers/serial/msm_serial.c +++ b/drivers/serial/msm_serial.c @@ -730,7 +730,6 @@ static int __devexit msm_serial_remove(struct platform_device *pdev) } static struct platform_driver msm_platform_driver = { - .probe = msm_serial_probe, .remove = msm_serial_remove, .driver = { .name = "msm_serial", -- cgit v1.2.3 From ff5392d77bbb0746d1a034e955231f03ffc30b61 Mon Sep 17 00:00:00 2001 From: Andrew Morton Date: Thu, 16 Jul 2009 16:05:53 +0100 Subject: drivers/serial/bfin_sport_uart.c: remove wrong and unneeded memset dcb314@hotmail.com notes that this memset has its args reversed. It's unneeded anyway, so remove it. Addresses http://bugzilla.kernel.org/show_bug.cgi?id=13587 Signed-off-by: Andrew Morton Signed-off-by: Alan Cox Signed-off-by: Linus Torvalds --- drivers/serial/bfin_sport_uart.c | 1 - 1 file changed, 1 deletion(-) diff --git a/drivers/serial/bfin_sport_uart.c b/drivers/serial/bfin_sport_uart.c index 34b4ae0fe76..c108b1a0ce9 100644 --- a/drivers/serial/bfin_sport_uart.c +++ b/drivers/serial/bfin_sport_uart.c @@ -236,7 +236,6 @@ static int sport_startup(struct uart_port *port) int retval; pr_debug("%s enter\n", __func__); - memset(buffer, 20, '\0'); snprintf(buffer, 20, "%s rx", up->name); retval = request_irq(up->rx_irq, sport_uart_rx_irq, IRQF_SAMPLE_RANDOM, buffer, up); if (retval) { -- cgit v1.2.3 From 5c9228f0cfb09a098a8a380116b42ae099e967b6 Mon Sep 17 00:00:00 2001 From: Johannes Weiner Date: Thu, 16 Jul 2009 16:06:09 +0100 Subject: vt: drop bootmem/slab memory distinction Bootmem is not used for the vt screen buffer anymore as slab is now available at the time the console is initialized. Get rid of the now superfluous distinction between slab and bootmem, it's always slab. This also fixes a kmalloc leak which Catalin described thusly: Commit a5f4f52e ("vt: use kzalloc() instead of the bootmem allocator") replaced the alloc_bootmem() with kzalloc() but didn't set vc_kmalloced to 1 and the memory block is later leaked. The corresponding kmemleak trace: unreferenced object 0xdf828000 (size 8192): comm "swapper", pid 0, jiffies 4294937296 backtrace: [] __save_stack_trace+0x17/0x1c [] log_early+0x55/0x84 [] kmemleak_alloc+0x33/0x3c [] __kmalloc+0xd7/0xe4 [] con_init+0xbf/0x1b8 [] console_init+0x11/0x20 [] start_kernel+0x137/0x1e4 Signed-off-by: Johannes Weiner Reviewed-by: Pekka Enberg Tested-by: Catalin Marinas Signed-off-by: Andrew Morton Signed-off-by: Alan Cox Signed-off-by: Linus Torvalds --- drivers/char/vt.c | 12 +++--------- include/linux/console_struct.h | 1 - 2 files changed, 3 insertions(+), 10 deletions(-) diff --git a/drivers/char/vt.c b/drivers/char/vt.c index 7947bd1b4cf..404f4c1ee43 100644 --- a/drivers/char/vt.c +++ b/drivers/char/vt.c @@ -770,14 +770,12 @@ int vc_allocate(unsigned int currcons) /* return 0 on success */ visual_init(vc, currcons, 1); if (!*vc->vc_uni_pagedir_loc) con_set_default_unimap(vc); - if (!vc->vc_kmalloced) - vc->vc_screenbuf = kmalloc(vc->vc_screenbuf_size, GFP_KERNEL); + vc->vc_screenbuf = kmalloc(vc->vc_screenbuf_size, GFP_KERNEL); if (!vc->vc_screenbuf) { kfree(vc); vc_cons[currcons].d = NULL; return -ENOMEM; } - vc->vc_kmalloced = 1; vc_init(vc, vc->vc_rows, vc->vc_cols, 1); vcs_make_sysfs(currcons); atomic_notifier_call_chain(&vt_notifier_list, VT_ALLOCATE, ¶m); @@ -913,10 +911,8 @@ static int vc_do_resize(struct tty_struct *tty, struct vc_data *vc, if (new_scr_end > new_origin) scr_memsetw((void *)new_origin, vc->vc_video_erase_char, new_scr_end - new_origin); - if (vc->vc_kmalloced) - kfree(vc->vc_screenbuf); + kfree(vc->vc_screenbuf); vc->vc_screenbuf = newscreen; - vc->vc_kmalloced = 1; vc->vc_screenbuf_size = new_screen_size; set_origin(vc); @@ -995,8 +991,7 @@ void vc_deallocate(unsigned int currcons) vc->vc_sw->con_deinit(vc); put_pid(vc->vt_pid); module_put(vc->vc_sw->owner); - if (vc->vc_kmalloced) - kfree(vc->vc_screenbuf); + kfree(vc->vc_screenbuf); if (currcons >= MIN_NR_CONSOLES) kfree(vc); vc_cons[currcons].d = NULL; @@ -2881,7 +2876,6 @@ static int __init con_init(void) INIT_WORK(&vc_cons[currcons].SAK_work, vc_SAK); visual_init(vc, currcons, 1); vc->vc_screenbuf = kzalloc(vc->vc_screenbuf_size, GFP_NOWAIT); - vc->vc_kmalloced = 0; vc_init(vc, vc->vc_rows, vc->vc_cols, currcons || !vc->vc_sw->con_save_screen); } diff --git a/include/linux/console_struct.h b/include/linux/console_struct.h index d71f7c0f931..38fe59dc89a 100644 --- a/include/linux/console_struct.h +++ b/include/linux/console_struct.h @@ -89,7 +89,6 @@ struct vc_data { unsigned int vc_need_wrap : 1; unsigned int vc_can_do_color : 1; unsigned int vc_report_mouse : 2; - unsigned int vc_kmalloced : 1; unsigned char vc_utf : 1; /* Unicode UTF-8 encoding */ unsigned char vc_utf_count; int vc_utf_char; -- cgit v1.2.3 From 9237a81a1468d0aca1cc4e244bba2362d6f81b35 Mon Sep 17 00:00:00 2001 From: Jiri Slaby Date: Thu, 16 Jul 2009 16:06:18 +0100 Subject: tty: nozomi, fix tty refcounting bug Don't forget to drop a tty refererence on fail paths in receive_data(). Signed-off-by: Jiri Slaby Signed-off-by: Alan Cox Signed-off-by: Linus Torvalds --- drivers/char/nozomi.c | 12 ++++++++---- 1 file changed, 8 insertions(+), 4 deletions(-) diff --git a/drivers/char/nozomi.c b/drivers/char/nozomi.c index 574f1c79b6e..280b41c507a 100644 --- a/drivers/char/nozomi.c +++ b/drivers/char/nozomi.c @@ -828,7 +828,7 @@ static int receive_data(enum port_type index, struct nozomi *dc) struct port *port = &dc->port[index]; void __iomem *addr = port->dl_addr[port->toggle_dl]; struct tty_struct *tty = tty_port_tty_get(&port->port); - int i; + int i, ret; if (unlikely(!tty)) { DBG1("tty not open for port: %d?", index); @@ -844,12 +844,14 @@ static int receive_data(enum port_type index, struct nozomi *dc) /* disable interrupt in downlink... */ disable_transmit_dl(index, dc); - return 0; + ret = 0; + goto put; } if (unlikely(size == 0)) { dev_err(&dc->pdev->dev, "size == 0?\n"); - return 1; + ret = 1; + goto put; } tty_buffer_request_room(tty, size); @@ -871,8 +873,10 @@ static int receive_data(enum port_type index, struct nozomi *dc) } set_bit(index, &dc->flip); + ret = 1; +put: tty_kref_put(tty); - return 1; + return ret; } /* Debug for interrupts */ -- cgit v1.2.3 From 807708844979ba8c6d5717345a8608454992696d Mon Sep 17 00:00:00 2001 From: Alan Cox Date: Thu, 16 Jul 2009 16:07:03 +0100 Subject: n_tty: Fix echo race If a tty in N_TTY mode with echo enabled manages to get itself into a state where - echo characters are pending - FASYNC is enabled - tty_write_wakeup is called from either - a device write path (pty) - an IRQ (serial) then it either deadlocks or explodes taking a mutex in the IRQ path. On the serial side it is almost impossible to reproduce because you have to go from a full serial port to a near empty one with echo characters pending. The pty case happens to have become possible to trigger using emacs and ptys, the pty changes having created a scenario which shows up this bug. The code path is n_tty:process_echoes() (takes mutex) tty_io:tty_put_char() pty:pty_write (or serial paths) tty_wakeup (from pty_write or serial IRQ) n_tty_write_wakeup() process_echoes() *KABOOM* Signed-off-by: Alan Cox Signed-off-by: Linus Torvalds --- drivers/char/n_tty.c | 3 --- 1 file changed, 3 deletions(-) diff --git a/drivers/char/n_tty.c b/drivers/char/n_tty.c index 94a5d5020ab..ff47907ff1b 100644 --- a/drivers/char/n_tty.c +++ b/drivers/char/n_tty.c @@ -1331,9 +1331,6 @@ handle_newline: static void n_tty_write_wakeup(struct tty_struct *tty) { - /* Write out any echoed characters that are still pending */ - process_echoes(tty); - if (tty->fasync && test_and_clear_bit(TTY_DO_WRITE_WAKEUP, &tty->flags)) kill_fasync(&tty->fasync, SIGIO, POLL_OUT); } -- cgit v1.2.3 From 6843f405da9d0adf734d8f695311e29cc92a220c Mon Sep 17 00:00:00 2001 From: Mike Frysinger Date: Thu, 16 Jul 2009 13:53:37 -0400 Subject: Blackfin: define HARDIRQ_BITS again for now The default values of HARDIRQ_BITS and PREEMPT_BITS in common code leads to build failure: In file included from include/linux/interrupt.h:12, from include/linux/kernel_stat.h:8, from arch/blackfin/kernel/asm-offsets.c:32: include/linux/hardirq.h:66:2: error: #error PREEMPT_ACTIVE is too low! So until that gets resolved, just declare our own default value again. Signed-off-by: Mike Frysinger --- arch/blackfin/include/asm/hardirq.h | 3 +++ 1 file changed, 3 insertions(+) diff --git a/arch/blackfin/include/asm/hardirq.h b/arch/blackfin/include/asm/hardirq.h index cbd52f86bb9..0b78b873df5 100644 --- a/arch/blackfin/include/asm/hardirq.h +++ b/arch/blackfin/include/asm/hardirq.h @@ -6,6 +6,9 @@ extern void ack_bad_irq(unsigned int irq); #define ack_bad_irq ack_bad_irq +/* Define until common code gets sane defaults */ +#define HARDIRQ_BITS 9 + #include #endif -- cgit v1.2.3 From c5ad4f592e27d782faea0a787d9181f192a69ef0 Mon Sep 17 00:00:00 2001 From: roel kluin Date: Sun, 12 Jul 2009 11:40:34 +0000 Subject: atl1c: add missing parentheses Parentheses are required or the comparison occurs before the bitand. Signed-off-by: Roel Kluin Signed-off-by: David S. Miller --- drivers/net/atl1c/atl1c.h | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/drivers/net/atl1c/atl1c.h b/drivers/net/atl1c/atl1c.h index e1658ef3fcd..2a1120ad2e7 100644 --- a/drivers/net/atl1c/atl1c.h +++ b/drivers/net/atl1c/atl1c.h @@ -188,14 +188,14 @@ struct atl1c_tpd_ext_desc { #define RRS_HDS_TYPE_DATA 2 #define RRS_IS_NO_HDS_TYPE(flag) \ - (((flag) >> (RRS_HDS_TYPE_SHIFT)) & RRS_HDS_TYPE_MASK == 0) + ((((flag) >> (RRS_HDS_TYPE_SHIFT)) & RRS_HDS_TYPE_MASK) == 0) #define RRS_IS_HDS_HEAD(flag) \ - (((flag) >> (RRS_HDS_TYPE_SHIFT)) & RRS_HDS_TYPE_MASK == \ + ((((flag) >> (RRS_HDS_TYPE_SHIFT)) & RRS_HDS_TYPE_MASK) == \ RRS_HDS_TYPE_HEAD) #define RRS_IS_HDS_DATA(flag) \ - (((flag) >> (RRS_HDS_TYPE_SHIFT)) & RRS_HDS_TYPE_MASK == \ + ((((flag) >> (RRS_HDS_TYPE_SHIFT)) & RRS_HDS_TYPE_MASK) == \ RRS_HDS_TYPE_DATA) /* rrs word 3 bit 0:31 */ @@ -245,7 +245,7 @@ struct atl1c_tpd_ext_desc { #define RRS_PACKET_TYPE_802_3 1 #define RRS_PACKET_TYPE_ETH 0 #define RRS_PACKET_IS_ETH(word) \ - (((word) >> RRS_PACKET_TYPE_SHIFT) & RRS_PACKET_TYPE_MASK == \ + ((((word) >> RRS_PACKET_TYPE_SHIFT) & RRS_PACKET_TYPE_MASK) == \ RRS_PACKET_TYPE_ETH) #define RRS_RXD_IS_VALID(word) \ ((((word) >> RRS_RXD_UPDATED_SHIFT) & RRS_RXD_UPDATED_MASK) == 1) -- cgit v1.2.3 From 37b76c697f4ac082e9923dfa8e8aecc8bc54a8e1 Mon Sep 17 00:00:00 2001 From: roel kluin Date: Sun, 12 Jul 2009 12:57:38 +0000 Subject: atl1c: misplaced parenthesis Fix misplaced parenthesis Signed-off-by: Roel Kluin Signed-off-by: David S. Miller --- drivers/net/atl1c/atl1c_main.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/atl1c/atl1c_main.c b/drivers/net/atl1c/atl1c_main.c index cd547a205fb..a383122679d 100644 --- a/drivers/net/atl1c/atl1c_main.c +++ b/drivers/net/atl1c/atl1c_main.c @@ -1689,7 +1689,7 @@ static void atl1c_clean_rx_irq(struct atl1c_adapter *adapter, u8 que, if (likely(RRS_RXD_IS_VALID(rrs->word3))) { rfd_num = (rrs->word0 >> RRS_RX_RFD_CNT_SHIFT) & RRS_RX_RFD_CNT_MASK; - if (unlikely(rfd_num) != 1) + if (unlikely(rfd_num != 1)) /* TODO support mul rfd*/ if (netif_msg_rx_err(adapter)) dev_warn(&pdev->dev, -- cgit v1.2.3 From e36b9d16c6a6d0f59803b3ef04ff3c22c3844c10 Mon Sep 17 00:00:00 2001 From: Moni Shoua Date: Wed, 15 Jul 2009 04:56:31 +0000 Subject: bonding: clean muticast addresses when device changes type Bonding device forbids slave device of different types under the same master. However, it is possible for a bonding master to change type during its lifetime. This can be either from ARPHRD_ETHER to ARPHRD_INFINIBAND or the other way arround. The change of type requires device level multicast address cleanup because device level multicast addresses depend on the device type. The patch adds a call to dev_close() before the bonding master changes type and dev_open() just after that. In the example below I enslaved an IPoIB device (ib0) under bond0. Since each bonding master starts as device of type ARPHRD_ETHER by default, a change of type occurs when ib0 is enslaved. This is how /proc/net/dev_mcast looks like without the patch 5 bond0 1 0 00ffffffff12601bffff000000000001ff96ca05 5 bond0 1 0 01005e000116 5 bond0 1 0 01005e7ffffd 5 bond0 1 0 01005e000001 5 bond0 1 0 333300000001 6 ib0 1 0 00ffffffff12601bffff000000000001ff96ca05 6 ib0 1 0 333300000001 6 ib0 1 0 01005e000001 6 ib0 1 0 01005e7ffffd 6 ib0 1 0 01005e000116 6 ib0 1 0 00ffffffff12401bffff00000000000000000001 6 ib0 1 0 00ffffffff12601bffff00000000000000000001 and this is how it looks like after the patch. 5 bond0 1 0 00ffffffff12601bffff000000000001ff96ca05 5 bond0 1 0 00ffffffff12601bffff00000000000000000001 5 bond0 1 0 00ffffffff12401bffff0000000000000ffffffd 5 bond0 1 0 00ffffffff12401bffff00000000000000000116 5 bond0 1 0 00ffffffff12401bffff00000000000000000001 6 ib0 1 0 00ffffffff12601bffff000000000001ff96ca05 6 ib0 1 0 00ffffffff12401bffff00000000000000000116 6 ib0 1 0 00ffffffff12401bffff0000000000000ffffffd 6 ib0 2 0 00ffffffff12401bffff00000000000000000001 6 ib0 2 0 00ffffffff12601bffff00000000000000000001 Signed-off-by: Moni Shoua Signed-off-by: Jay Vosburgh Signed-off-by: David S. Miller --- drivers/net/bonding/bond_main.c | 12 ++++++++++-- 1 file changed, 10 insertions(+), 2 deletions(-) diff --git a/drivers/net/bonding/bond_main.c b/drivers/net/bonding/bond_main.c index d927f71af8a..aa1be1fecee 100644 --- a/drivers/net/bonding/bond_main.c +++ b/drivers/net/bonding/bond_main.c @@ -1459,8 +1459,16 @@ int bond_enslave(struct net_device *bond_dev, struct net_device *slave_dev) * ether type (eg ARPHRD_ETHER and ARPHRD_INFINIBAND) share the same bond */ if (bond->slave_cnt == 0) { - if (slave_dev->type != ARPHRD_ETHER) - bond_setup_by_slave(bond_dev, slave_dev); + if (bond_dev->type != slave_dev->type) { + dev_close(bond_dev); + pr_debug("%s: change device type from %d to %d\n", + bond_dev->name, bond_dev->type, slave_dev->type); + if (slave_dev->type != ARPHRD_ETHER) + bond_setup_by_slave(bond_dev, slave_dev); + else + ether_setup(bond_dev); + dev_open(bond_dev); + } } else if (bond_dev->type != slave_dev->type) { pr_err(DRV_NAME ": %s ether type (%d) is different " "from other slaves (%d), can not enslave it.\n", -- cgit v1.2.3 From 303d67c288319768b19ed8dbed429fef7eb7c275 Mon Sep 17 00:00:00 2001 From: Krzysztof Halasa Date: Tue, 14 Jul 2009 11:01:54 +0000 Subject: E100: work around the driver using streaming DMA mapping for RX descriptors. E100 places it's RX packet descriptors inside skb->data and uses them with bidirectional streaming DMA mapping. Unfortunately it fails to transfer skb->data ownership to the device after it reads the descriptor's status, breaking on non-coherent (e.g., ARM) platforms. This have to be converted to use coherent memory for the descriptors. Signed-off-by: Krzysztof Halasa Acked-by: Jeff Kirsher Signed-off-by: David S. Miller --- drivers/net/e100.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/drivers/net/e100.c b/drivers/net/e100.c index efa680f4b8d..41b648a67fe 100644 --- a/drivers/net/e100.c +++ b/drivers/net/e100.c @@ -1897,6 +1897,9 @@ static int e100_rx_indicate(struct nic *nic, struct rx *rx, if (ioread8(&nic->csr->scb.status) & rus_no_res) nic->ru_running = RU_SUSPENDED; + pci_dma_sync_single_for_device(nic->pdev, rx->dma_addr, + sizeof(struct rfd), + PCI_DMA_BIDIRECTIONAL); return -ENODATA; } -- cgit v1.2.3 From 4dc6dc7162c08b9965163c9ab3f9375d4adff2c7 Mon Sep 17 00:00:00 2001 From: Eric Dumazet Date: Wed, 15 Jul 2009 23:13:10 +0000 Subject: net: sock_copy() fixes Commit e912b1142be8f1e2c71c71001dc992c6e5eb2ec1 (net: sk_prot_alloc() should not blindly overwrite memory) took care of not zeroing whole new socket at allocation time. sock_copy() is another spot where we should be very careful. We should not set refcnt to a non null value, until we are sure other fields are correctly setup, or a lockless reader could catch this socket by mistake, while not fully (re)initialized. This patch puts sk_node & sk_refcnt to the very beginning of struct sock to ease sock_copy() & sk_prot_alloc() job. We add appropriate smp_wmb() before sk_refcnt initializations to match our RCU requirements (changes to sock keys should be committed to memory before sk_refcnt setting) Signed-off-by: Eric Dumazet Signed-off-by: David S. Miller --- include/net/sock.h | 32 +++++++++++++++++++------------- net/core/sock.c | 20 ++++++++++++++++++-- 2 files changed, 37 insertions(+), 15 deletions(-) diff --git a/include/net/sock.h b/include/net/sock.h index 2c0da9239b9..950409dcec3 100644 --- a/include/net/sock.h +++ b/include/net/sock.h @@ -104,15 +104,15 @@ struct net; /** * struct sock_common - minimal network layer representation of sockets + * @skc_node: main hash linkage for various protocol lookup tables + * @skc_nulls_node: main hash linkage for UDP/UDP-Lite protocol + * @skc_refcnt: reference count + * @skc_hash: hash value used with various protocol lookup tables * @skc_family: network address family * @skc_state: Connection state * @skc_reuse: %SO_REUSEADDR setting * @skc_bound_dev_if: bound device index if != 0 - * @skc_node: main hash linkage for various protocol lookup tables - * @skc_nulls_node: main hash linkage for UDP/UDP-Lite protocol * @skc_bind_node: bind hash linkage for various protocol lookup tables - * @skc_refcnt: reference count - * @skc_hash: hash value used with various protocol lookup tables * @skc_prot: protocol handlers inside a network family * @skc_net: reference to the network namespace of this socket * @@ -120,17 +120,21 @@ struct net; * for struct sock and struct inet_timewait_sock. */ struct sock_common { - unsigned short skc_family; - volatile unsigned char skc_state; - unsigned char skc_reuse; - int skc_bound_dev_if; + /* + * first fields are not copied in sock_copy() + */ union { struct hlist_node skc_node; struct hlist_nulls_node skc_nulls_node; }; - struct hlist_node skc_bind_node; atomic_t skc_refcnt; + unsigned int skc_hash; + unsigned short skc_family; + volatile unsigned char skc_state; + unsigned char skc_reuse; + int skc_bound_dev_if; + struct hlist_node skc_bind_node; struct proto *skc_prot; #ifdef CONFIG_NET_NS struct net *skc_net; @@ -208,15 +212,17 @@ struct sock { * don't add nothing before this first member (__sk_common) --acme */ struct sock_common __sk_common; +#define sk_node __sk_common.skc_node +#define sk_nulls_node __sk_common.skc_nulls_node +#define sk_refcnt __sk_common.skc_refcnt + +#define sk_copy_start __sk_common.skc_hash +#define sk_hash __sk_common.skc_hash #define sk_family __sk_common.skc_family #define sk_state __sk_common.skc_state #define sk_reuse __sk_common.skc_reuse #define sk_bound_dev_if __sk_common.skc_bound_dev_if -#define sk_node __sk_common.skc_node -#define sk_nulls_node __sk_common.skc_nulls_node #define sk_bind_node __sk_common.skc_bind_node -#define sk_refcnt __sk_common.skc_refcnt -#define sk_hash __sk_common.skc_hash #define sk_prot __sk_common.skc_prot #define sk_net __sk_common.skc_net kmemcheck_bitfield_begin(flags); diff --git a/net/core/sock.c b/net/core/sock.c index ba5d2116aea..d9eec153d53 100644 --- a/net/core/sock.c +++ b/net/core/sock.c @@ -919,13 +919,19 @@ static inline void sock_lock_init(struct sock *sk) af_family_keys + sk->sk_family); } +/* + * Copy all fields from osk to nsk but nsk->sk_refcnt must not change yet, + * even temporarly, because of RCU lookups. sk_node should also be left as is. + */ static void sock_copy(struct sock *nsk, const struct sock *osk) { #ifdef CONFIG_SECURITY_NETWORK void *sptr = nsk->sk_security; #endif - - memcpy(nsk, osk, osk->sk_prot->obj_size); + BUILD_BUG_ON(offsetof(struct sock, sk_copy_start) != + sizeof(osk->sk_node) + sizeof(osk->sk_refcnt)); + memcpy(&nsk->sk_copy_start, &osk->sk_copy_start, + osk->sk_prot->obj_size - offsetof(struct sock, sk_copy_start)); #ifdef CONFIG_SECURITY_NETWORK nsk->sk_security = sptr; security_sk_clone(osk, nsk); @@ -1140,6 +1146,11 @@ struct sock *sk_clone(const struct sock *sk, const gfp_t priority) newsk->sk_err = 0; newsk->sk_priority = 0; + /* + * Before updating sk_refcnt, we must commit prior changes to memory + * (Documentation/RCU/rculist_nulls.txt for details) + */ + smp_wmb(); atomic_set(&newsk->sk_refcnt, 2); /* @@ -1855,6 +1866,11 @@ void sock_init_data(struct socket *sock, struct sock *sk) sk->sk_stamp = ktime_set(-1L, 0); + /* + * Before updating sk_refcnt, we must commit prior changes to memory + * (Documentation/RCU/rculist_nulls.txt for details) + */ + smp_wmb(); atomic_set(&sk->sk_refcnt, 1); atomic_set(&sk->sk_wmem_alloc, 1); atomic_set(&sk->sk_drops, 0); -- cgit v1.2.3 From 3d1454dd93e84ad1394b6b1646f13795e9f6928e Mon Sep 17 00:00:00 2001 From: Stephen Hemminger Date: Thu, 16 Jul 2009 13:20:57 +0000 Subject: sky2: revert shutdown changes The commit changes to shutdown path broke startup on some systems. revert commit c0bad0f2e4366d5bbfe0c4a7a80bca8f4b05272b Signed-off-by: Stephen Hemminger Signed-off-by: David S. Miller --- drivers/net/sky2.c | 9 +-------- 1 file changed, 1 insertion(+), 8 deletions(-) diff --git a/drivers/net/sky2.c b/drivers/net/sky2.c index daf961ab68b..ba768dfa59e 100644 --- a/drivers/net/sky2.c +++ b/drivers/net/sky2.c @@ -1151,14 +1151,7 @@ stopped: /* reset the Rx prefetch unit */ sky2_write32(hw, Y2_QADDR(rxq, PREF_UNIT_CTRL), PREF_UNIT_RST_SET); - - /* Reset the RAM Buffer receive queue */ - sky2_write8(hw, RB_ADDR(rxq, RB_CTRL), RB_RST_SET); - - /* Reset Rx MAC FIFO */ - sky2_write8(hw, SK_REG(sky2->port, RX_GMF_CTRL_T), GMF_RST_SET); - - sky2_read8(hw, B0_CTST); + mmiowb(); } /* Clean out receive buffer area, assumes receiver hardware stopped */ -- cgit v1.2.3 From 86e713a06ab3e5b15a3189485ce33aa21b9e52ca Mon Sep 17 00:00:00 2001 From: Lucy Liu Date: Thu, 16 Jul 2009 13:43:10 +0000 Subject: ixgbe: clear mac address data block in DCB mode This change clears the address data block memory space, which is needed for the 82598 which does not have a SAN MAC. Signed-off-by: Lucy Liu Acked-by: Peter P Waskiewicz Jr Signed-off-by: Jeff Kirsher Signed-off-by: David S. Miller --- drivers/net/ixgbe/ixgbe_dcb_nl.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/net/ixgbe/ixgbe_dcb_nl.c b/drivers/net/ixgbe/ixgbe_dcb_nl.c index 7c5978ad929..5b8dab22c6d 100644 --- a/drivers/net/ixgbe/ixgbe_dcb_nl.c +++ b/drivers/net/ixgbe/ixgbe_dcb_nl.c @@ -175,6 +175,8 @@ static void ixgbe_dcbnl_get_perm_hw_addr(struct net_device *netdev, struct ixgbe_adapter *adapter = netdev_priv(netdev); int i, j; + memset(perm_addr, 0xff, MAX_ADDR_LEN); + for (i = 0; i < netdev->addr_len; i++) perm_addr[i] = adapter->hw.mac.perm_addr[i]; -- cgit v1.2.3 From 869f1c54e9aecde1dfd4349832ce9415a596be8e Mon Sep 17 00:00:00 2001 From: Lucy Liu Date: Thu, 16 Jul 2009 13:43:31 +0000 Subject: ixgbe: Remove DPRINTK messages in DCB mode Remove debug DPRINTK in DCB mode netlink interface. Signed-off-by: Lucy Liu Acked-by: Peter P Waskiewicz Jr Signed-off-by: Jeff Kirsher Signed-off-by: David S. Miller --- drivers/net/ixgbe/ixgbe_dcb_nl.c | 4 ---- 1 file changed, 4 deletions(-) diff --git a/drivers/net/ixgbe/ixgbe_dcb_nl.c b/drivers/net/ixgbe/ixgbe_dcb_nl.c index 5b8dab22c6d..da2c8514b8d 100644 --- a/drivers/net/ixgbe/ixgbe_dcb_nl.c +++ b/drivers/net/ixgbe/ixgbe_dcb_nl.c @@ -106,8 +106,6 @@ static u8 ixgbe_dcbnl_get_state(struct net_device *netdev) { struct ixgbe_adapter *adapter = netdev_priv(netdev); - DPRINTK(DRV, INFO, "Get DCB Admin Mode.\n"); - return !!(adapter->flags & IXGBE_FLAG_DCB_ENABLED); } @@ -116,8 +114,6 @@ static u8 ixgbe_dcbnl_set_state(struct net_device *netdev, u8 state) u8 err = 0; struct ixgbe_adapter *adapter = netdev_priv(netdev); - DPRINTK(DRV, INFO, "Set DCB Admin Mode.\n"); - if (state > 0) { /* Turn on DCB */ if (adapter->flags & IXGBE_FLAG_DCB_ENABLED) -- cgit v1.2.3 From 7fefe6a88494b00b151b5ca7bb84daaa781bbca7 Mon Sep 17 00:00:00 2001 From: Vincent CUISSARD Date: Thu, 16 Jul 2009 06:08:58 +0000 Subject: cdc-eem: bad crc checking When the driver received an EEM packet with CRC option enabled, driver must compute and check the CRC of the Ethernet data. Previous version computes CRC on Ethernet data plus the original CRC value. Skbuff is correctly trimed but the old length is used when CRC is computed. Signed-off-by: Vincent CUISSARD Signed-off-by: David S. Miller --- drivers/net/usb/cdc_eem.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/usb/cdc_eem.c b/drivers/net/usb/cdc_eem.c index cd35d50e46d..45cebfb302c 100644 --- a/drivers/net/usb/cdc_eem.c +++ b/drivers/net/usb/cdc_eem.c @@ -311,7 +311,7 @@ static int eem_rx_fixup(struct usbnet *dev, struct sk_buff *skb) * bmCRC = 0 : CRC = 0xDEADBEEF */ if (header & BIT(14)) - crc2 = ~crc32_le(~0, skb2->data, len); + crc2 = ~crc32_le(~0, skb2->data, skb2->len); else crc2 = 0xdeadbeef; -- cgit v1.2.3 From 04aef32d39cc4ef80087c0ce8ed113c6d64f1a6b Mon Sep 17 00:00:00 2001 From: Xiao Guangrong Date: Wed, 15 Jul 2009 12:29:06 +0800 Subject: tracing/function: Fix the return value of ftrace_trace_onoff_callback() ftrace_trace_onoff_callback() will return an error even if we do the right operation, for example: # echo _spin_*:traceon:10 > set_ftrace_filter -bash: echo: write error: Invalid argument # cat set_ftrace_filter #### all functions enabled #### _spin_trylock_bh:traceon:count=10 _spin_unlock_irq:traceon:count=10 _spin_unlock_bh:traceon:count=10 _spin_lock_irq:traceon:count=10 _spin_unlock:traceon:count=10 _spin_trylock:traceon:count=10 _spin_unlock_irqrestore:traceon:count=10 _spin_lock_irqsave:traceon:count=10 _spin_lock_bh:traceon:count=10 _spin_lock:traceon:count=10 We want to set _spin_*:traceon:10 to set_ftrace_filter, it complains with "Invalid argument", but the operation is successful. This is because ftrace_process_regex() returns the number of functions that matched the pattern. If the number is not 0, this value is returned by ftrace_regex_write() whereas we want to return the number of bytes virtually written. Also the file offset pointer is not updated in this case. If the number of matched functions is lower than the number of bytes written by the user, this results to a reprocessing of the string given by the user with a lower size, leading to a malformed ftrace regex and then a -EINVAL returned. So, this patch fixes it by returning 0 if no error occured. The fix also applies on 2.6.30 Signed-off-by: Xiao Guangrong Reviewed-by: Li Zefan Cc: stable@kernel.org Signed-off-by: Frederic Weisbecker --- kernel/trace/trace_functions.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/kernel/trace/trace_functions.c b/kernel/trace/trace_functions.c index 7402144bff2..75ef000613c 100644 --- a/kernel/trace/trace_functions.c +++ b/kernel/trace/trace_functions.c @@ -363,7 +363,7 @@ ftrace_trace_onoff_callback(char *glob, char *cmd, char *param, int enable) out_reg: ret = register_ftrace_function_probe(glob, ops, count); - return ret; + return ret < 0 ? ret : 0; } static struct ftrace_func_command ftrace_traceon_cmd = { -- cgit v1.2.3 From 0a09f4319c6d88c732ed46735f8584bbb95cac65 Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Thu, 16 Jul 2009 15:26:55 +0900 Subject: block: fix failfast merge testing in elv_rq_merge_ok() Commit ab0fd1debe730ec9998678a0c53caefbd121ed10 tries to prevent merge of requests with different failfast settings. In elv_rq_merge_ok(), it compares new bio's failfast flags against the merge target request's. However, the flag testing accessors for bio and blk don't return boolean but the tested bit value directly and FAILFAST on bio and blk don't match, so directly comparing them with == results in false negative unnecessary preventing merge of readahead requests. This patch convert the results to boolean by negating them before comparison. Signed-off-by: Tejun Heo Cc: Jens Axboe Cc: Boaz Harrosh Cc: FUJITA Tomonori Cc: James Bottomley Cc: Jeff Garzik --- block/elevator.c | 13 +++++++++---- 1 file changed, 9 insertions(+), 4 deletions(-) diff --git a/block/elevator.c b/block/elevator.c index 6f2375339a9..2d511f9105e 100644 --- a/block/elevator.c +++ b/block/elevator.c @@ -101,11 +101,16 @@ int elv_rq_merge_ok(struct request *rq, struct bio *bio) return 0; /* - * Don't merge if failfast settings don't match + * Don't merge if failfast settings don't match. + * + * FIXME: The negation in front of each condition is necessary + * because bio and request flags use different bit positions + * and the accessors return those bits directly. This + * ugliness will soon go away. */ - if (bio_failfast_dev(bio) != blk_failfast_dev(rq) || - bio_failfast_transport(bio) != blk_failfast_transport(rq) || - bio_failfast_driver(bio) != blk_failfast_driver(rq)) + if (!bio_failfast_dev(bio) != !blk_failfast_dev(rq) || + !bio_failfast_transport(bio) != !blk_failfast_transport(rq) || + !bio_failfast_driver(bio) != !blk_failfast_driver(rq)) return 0; if (!elv_iosched_allow_merge(rq, bio)) -- cgit v1.2.3 From 8f47428704c2fd6f787a6f340071b9c338b65803 Mon Sep 17 00:00:00 2001 From: Julia Lawall Date: Mon, 13 Jul 2009 22:43:41 +0200 Subject: ataflop: adjust NULL test dtp is derefenced on the lines above the test !dtp, and so it cannot be NULL at this point. A simplified version of the semantic match that finds this problem is as follows: (http://www.emn.fr/x-info/coccinelle/) // @r@ expression x,E,E1; identifier f,l; position p1,p2; @@ *x@p1->f = E1; ... when != x = E when != goto l; ( *x@p2 == NULL | *x@p2 != NULL ) // Signed-off-by: Julia Lawall Signed-off-by: Tejun Heo --- drivers/block/ataflop.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/block/ataflop.c b/drivers/block/ataflop.c index f5e7180d7f4..3ff02941b3d 100644 --- a/drivers/block/ataflop.c +++ b/drivers/block/ataflop.c @@ -1627,7 +1627,7 @@ static int fd_ioctl(struct block_device *bdev, fmode_t mode, drive, dtp->blocks, dtp->spt, dtp->stretch); /* sanity check */ - if (!dtp || setprm.track != dtp->blocks/dtp->spt/2 || + if (setprm.track != dtp->blocks/dtp->spt/2 || setprm.head != 2) { redo_fd_request(); return -EINVAL; -- cgit v1.2.3 From 9cb308ce8d32a1fb3600acab6034e19a90228743 Mon Sep 17 00:00:00 2001 From: Xiaotian Feng Date: Fri, 17 Jul 2009 15:26:26 +0800 Subject: block: sysfs fix mismatched queue_var_{store,show} in 64bit kernel In blk-sysfs.c, queue_var_store uses unsigned long to store data, but queue_var_show uses unsigned int to show data. This causes, # echo 70000000000 > /sys/block//queue/read_ahead_kb # cat /sys/block//queue/read_ahead_kb => get wrong value Fix it by using unsigned long. While at it, convert queue_rq_affinity_show() such that it uses bool variable instead of explicit != 0 testing. Signed-off-by: Xiaotian Feng Signed-off-by: Tejun Heo --- block/blk-sysfs.c | 11 ++++++----- 1 file changed, 6 insertions(+), 5 deletions(-) diff --git a/block/blk-sysfs.c b/block/blk-sysfs.c index b1cd04087d6..418d6361968 100644 --- a/block/blk-sysfs.c +++ b/block/blk-sysfs.c @@ -16,9 +16,9 @@ struct queue_sysfs_entry { }; static ssize_t -queue_var_show(unsigned int var, char *page) +queue_var_show(unsigned long var, char *page) { - return sprintf(page, "%d\n", var); + return sprintf(page, "%lu\n", var); } static ssize_t @@ -77,7 +77,8 @@ queue_requests_store(struct request_queue *q, const char *page, size_t count) static ssize_t queue_ra_show(struct request_queue *q, char *page) { - int ra_kb = q->backing_dev_info.ra_pages << (PAGE_CACHE_SHIFT - 10); + unsigned long ra_kb = q->backing_dev_info.ra_pages << + (PAGE_CACHE_SHIFT - 10); return queue_var_show(ra_kb, (page)); } @@ -189,9 +190,9 @@ static ssize_t queue_nomerges_store(struct request_queue *q, const char *page, static ssize_t queue_rq_affinity_show(struct request_queue *q, char *page) { - unsigned int set = test_bit(QUEUE_FLAG_SAME_COMP, &q->queue_flags); + bool set = test_bit(QUEUE_FLAG_SAME_COMP, &q->queue_flags); - return queue_var_show(set != 0, page); + return queue_var_show(set, page); } static ssize_t -- cgit v1.2.3 From 5780888bcac316508eb5f4dd23bbea8b5057647c Mon Sep 17 00:00:00 2001 From: Matias Zabaljauregui Date: Thu, 18 Jun 2009 11:44:06 -0300 Subject: lguest: fix journey fix: "make Guest" was complaining about duplicated G:032 Signed-off-by: Matias Zabaljauregui Signed-off-by: Rusty Russell --- arch/x86/include/asm/lguest_hcall.h | 2 +- arch/x86/lguest/boot.c | 2 +- include/linux/lguest.h | 2 +- 3 files changed, 3 insertions(+), 3 deletions(-) diff --git a/arch/x86/include/asm/lguest_hcall.h b/arch/x86/include/asm/lguest_hcall.h index d31c4a68407..33600a66755 100644 --- a/arch/x86/include/asm/lguest_hcall.h +++ b/arch/x86/include/asm/lguest_hcall.h @@ -30,7 +30,7 @@ #include #include -/*G:031 But first, how does our Guest contact the Host to ask for privileged +/*G:030 But first, how does our Guest contact the Host to ask for privileged * operations? There are two ways: the direct way is to make a "hypercall", * to make requests of the Host Itself. * diff --git a/arch/x86/lguest/boot.c b/arch/x86/lguest/boot.c index 7bc65f0f62c..0188fd37b6c 100644 --- a/arch/x86/lguest/boot.c +++ b/arch/x86/lguest/boot.c @@ -1079,7 +1079,7 @@ static unsigned lguest_patch(u8 type, u16 clobber, void *ibuf, return insn_len; } -/*G:030 Once we get to lguest_init(), we know we're a Guest. The various +/*G:029 Once we get to lguest_init(), we know we're a Guest. The various * pv_ops structures in the kernel provide points for (almost) every routine we * have to override to avoid privileged instructions. */ __init void lguest_init(void) diff --git a/include/linux/lguest.h b/include/linux/lguest.h index 7bc1440fc47..dbf2479e808 100644 --- a/include/linux/lguest.h +++ b/include/linux/lguest.h @@ -11,7 +11,7 @@ #define LG_CLOCK_MIN_DELTA 100UL #define LG_CLOCK_MAX_DELTA ULONG_MAX -/*G:032 The second method of communicating with the Host is to via "struct +/*G:031 The second method of communicating with the Host is to via "struct * lguest_data". Once the Guest's initialization hypercall tells the Host where * this is, the Guest and Host both publish information in it. :*/ struct lguest_data -- cgit v1.2.3 From 27de22d03d6808a82bbe9bd7e3cc75d60132ba9e Mon Sep 17 00:00:00 2001 From: Davide Libenzi Date: Fri, 17 Jul 2009 21:47:44 -0600 Subject: lguest: remove unnecessary forward struct declaration While fixing lg.h to drop the fwd declaration, I noticed there's another one ;) Signed-off-by: Rusty Russell --- drivers/lguest/lg.h | 2 -- 1 file changed, 2 deletions(-) diff --git a/drivers/lguest/lg.h b/drivers/lguest/lg.h index 9c3138265f8..01c59192379 100644 --- a/drivers/lguest/lg.h +++ b/drivers/lguest/lg.h @@ -38,8 +38,6 @@ struct lguest_pages #define CHANGED_GDT_TLS 4 /* Actually a subset of CHANGED_GDT */ #define CHANGED_ALL 3 -struct lguest; - struct lg_cpu { unsigned int id; struct lguest *lg; -- cgit v1.2.3 From 7a5049205f7265620c48781814155f2763e70abb Mon Sep 17 00:00:00 2001 From: Rusty Russell Date: Fri, 17 Jul 2009 21:47:44 -0600 Subject: lguest: restrict CPUID to avoid perf counter wrmsr Avoid the following: [ 0.012093] WARNING: at arch/x86/kernel/apic/apic.c:249 native_apic_write_dummy+0x2f/0x40() Rather than chase each new cpuid-detected feature, just lie about the highest valid CPUID so this code is never run. Signed-off-by: Rusty Russell --- arch/x86/lguest/boot.c | 5 +++++ 1 file changed, 5 insertions(+) diff --git a/arch/x86/lguest/boot.c b/arch/x86/lguest/boot.c index 0188fd37b6c..f2bf1f73d46 100644 --- a/arch/x86/lguest/boot.c +++ b/arch/x86/lguest/boot.c @@ -379,6 +379,11 @@ static void lguest_cpuid(unsigned int *ax, unsigned int *bx, native_cpuid(ax, bx, cx, dx); switch (function) { + case 0: /* ID and highest CPUID. Futureproof a little by sticking to + * older ones. */ + if (*ax > 5) + *ax = 5; + break; case 1: /* Basic feature request. */ /* We only allow kernel to see SSE3, CMPXCHG16B and SSSE3 */ *cx &= 0x00002201; -- cgit v1.2.3 From 4eff3cae9c9809720c636e64bc72f212258e0bd5 Mon Sep 17 00:00:00 2001 From: Christoph Hellwig Date: Fri, 17 Jul 2009 21:47:45 -0600 Subject: virtio_blk: don't bounce highmem requests By default a block driver bounces highmem requests, but virtio-blk is perfectly fine with any request that fit into it's 64 bit addressing scheme, mapped in the kernel virtual space or not. Besides improving performance on highmem systems this also makes the reproducible oops in __bounce_end_io go away (but hiding the real cause). Signed-off-by: Christoph Hellwig Signed-off-by: Rusty Russell --- drivers/block/virtio_blk.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/drivers/block/virtio_blk.c b/drivers/block/virtio_blk.c index 43db3ea15b5..4c47859ad8b 100644 --- a/drivers/block/virtio_blk.c +++ b/drivers/block/virtio_blk.c @@ -360,6 +360,9 @@ static int __devinit virtblk_probe(struct virtio_device *vdev) blk_queue_max_phys_segments(vblk->disk->queue, vblk->sg_elems-2); blk_queue_max_hw_segments(vblk->disk->queue, vblk->sg_elems-2); + /* No need to bounce any requests */ + blk_queue_bounce_limit(vblk->disk->queue, BLK_BOUNCE_ANY); + /* No real sector limit. */ blk_queue_max_sectors(vblk->disk->queue, -1U); -- cgit v1.2.3 From d9ecdea7ed7467db32ec160f4eca46c279255606 Mon Sep 17 00:00:00 2001 From: Christoph Hellwig Date: Sat, 20 Jun 2009 21:29:41 +0200 Subject: virtio_blk: ioctl return value fix Block driver ioctl methods must return ENOTTY and not -ENOIOCTLCMD if they expect the block layer to handle generic ioctls. This triggered a BLKROSET failure in xfsqa #200. Signed-off-by: Christoph Hellwig Signed-off-by: Rusty Russell --- drivers/block/virtio_blk.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/block/virtio_blk.c b/drivers/block/virtio_blk.c index 4c47859ad8b..fbeefb68a31 100644 --- a/drivers/block/virtio_blk.c +++ b/drivers/block/virtio_blk.c @@ -213,7 +213,7 @@ static int virtblk_ioctl(struct block_device *bdev, fmode_t mode, * Only allow the generic SCSI ioctls if the host can support it. */ if (!virtio_has_feature(vblk->vdev, VIRTIO_BLK_F_SCSI)) - return -ENOIOCTLCMD; + return -ENOTTY; return scsi_cmd_ioctl(disk->queue, disk, mode, cmd, argp); } -- cgit v1.2.3 From 4b892e6582e3a4fe01f623aea386907270d5bf83 Mon Sep 17 00:00:00 2001 From: Mark McLoughlin Date: Tue, 7 Jul 2009 08:26:45 +0100 Subject: virtio-pci: correctly unregister root device on error If pci_register_driver() fails we're incorrectly unregistering the root device with device_unregister() rather than root_device_unregister(). Reported-by: Don Zickus Signed-off-by: Mark McLoughlin Signed-off-by: Rusty Russell --- drivers/virtio/virtio_pci.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/virtio/virtio_pci.c b/drivers/virtio/virtio_pci.c index 193c8f0e5cc..bcec78ffc76 100644 --- a/drivers/virtio/virtio_pci.c +++ b/drivers/virtio/virtio_pci.c @@ -669,7 +669,7 @@ static int __init virtio_pci_init(void) err = pci_register_driver(&virtio_pci_driver); if (err) - device_unregister(virtio_pci_root); + root_device_unregister(virtio_pci_root); return err; } -- cgit v1.2.3 From e79f07e2925b10f09a2621650c16f3d6ea778747 Mon Sep 17 00:00:00 2001 From: Alex Williamson Date: Tue, 7 Jul 2009 08:47:10 -0600 Subject: virtio_net: Sync header with qemu Qemu added support for a few extra RX modes that Linux doesn't currently make use of. Sync the headers to maintain consistency. Signed-off-by: Alex Williamson Signed-off-by: Rusty Russell --- include/linux/virtio_net.h | 14 ++++++++++---- 1 file changed, 10 insertions(+), 4 deletions(-) diff --git a/include/linux/virtio_net.h b/include/linux/virtio_net.h index cec79adbe3e..9c543d6ac53 100644 --- a/include/linux/virtio_net.h +++ b/include/linux/virtio_net.h @@ -27,6 +27,7 @@ #define VIRTIO_NET_F_CTRL_VQ 17 /* Control channel available */ #define VIRTIO_NET_F_CTRL_RX 18 /* Control channel RX mode support */ #define VIRTIO_NET_F_CTRL_VLAN 19 /* Control channel VLAN filtering */ +#define VIRTIO_NET_F_CTRL_RX_EXTRA 20 /* Extra RX mode control support */ #define VIRTIO_NET_S_LINK_UP 1 /* Link is up */ @@ -81,14 +82,19 @@ typedef __u8 virtio_net_ctrl_ack; #define VIRTIO_NET_ERR 1 /* - * Control the RX mode, ie. promisucous and allmulti. PROMISC and - * ALLMULTI commands require an "out" sg entry containing a 1 byte - * state value, zero = disable, non-zero = enable. These commands - * are supported with the VIRTIO_NET_F_CTRL_RX feature. + * Control the RX mode, ie. promisucous, allmulti, etc... + * All commands require an "out" sg entry containing a 1 byte + * state value, zero = disable, non-zero = enable. Commands + * 0 and 1 are supported with the VIRTIO_NET_F_CTRL_RX feature. + * Commands 2-5 are added with VIRTIO_NET_F_CTRL_RX_EXTRA. */ #define VIRTIO_NET_CTRL_RX 0 #define VIRTIO_NET_CTRL_RX_PROMISC 0 #define VIRTIO_NET_CTRL_RX_ALLMULTI 1 + #define VIRTIO_NET_CTRL_RX_ALLUNI 2 + #define VIRTIO_NET_CTRL_RX_NOMULTI 3 + #define VIRTIO_NET_CTRL_RX_NOUNI 4 + #define VIRTIO_NET_CTRL_RX_NOBCAST 5 /* * Control the MAC filter table. -- cgit v1.2.3 From 2653d1d7f0284f3b68f25dafa208d0a013f7e9db Mon Sep 17 00:00:00 2001 From: Ryan Mallon Date: Wed, 15 Jul 2009 21:33:22 +0100 Subject: [ARM] 5606/1: Fix ep93xx watchdog driver headers Fix a number of build errors in the ep93xx watchdog driver due to missing io.h Signed-off-by: Ryan Mallon Acked-by: H Hartley Sweeten Signed-off-by: Russell King --- drivers/watchdog/ep93xx_wdt.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/watchdog/ep93xx_wdt.c b/drivers/watchdog/ep93xx_wdt.c index e9f950ff86e..cdd55e0d09f 100644 --- a/drivers/watchdog/ep93xx_wdt.c +++ b/drivers/watchdog/ep93xx_wdt.c @@ -29,6 +29,7 @@ #include #include #include +#include #include #define WDT_VERSION "0.3" -- cgit v1.2.3 From d740d347f856f0fd8baf2f63d8daa600ed135bfd Mon Sep 17 00:00:00 2001 From: Linus Walleij Date: Thu, 16 Jul 2009 22:40:26 +0100 Subject: [ARM] 5608/1: Updated U300 defconfig Removed the LBD support that isn't of any use right now at least, then remove remnants of the TCM config flags that somehow crept in by mistake (not yet merged patch for 2.6.32) and then the usual defconfig noise from updated menus. Signed-off-by: Linus Walleij Signed-off-by: Russell King --- arch/arm/configs/u300_defconfig | 18 ++++++++---------- 1 file changed, 8 insertions(+), 10 deletions(-) diff --git a/arch/arm/configs/u300_defconfig b/arch/arm/configs/u300_defconfig index 4762d900129..7d61ae6e75d 100644 --- a/arch/arm/configs/u300_defconfig +++ b/arch/arm/configs/u300_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.31-rc1 -# Thu Jul 2 00:16:59 2009 +# Linux kernel version: 2.6.31-rc3 +# Thu Jul 16 23:36:10 2009 # CONFIG_ARM=y CONFIG_SYS_SUPPORTS_APM_EMULATION=y @@ -9,7 +9,6 @@ CONFIG_GENERIC_GPIO=y CONFIG_GENERIC_TIME=y CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_MMU=y -CONFIG_HAVE_TCM=y CONFIG_GENERIC_HARDIRQS=y CONFIG_STACKTRACE_SUPPORT=y CONFIG_HAVE_LATENCYTOP_SUPPORT=y @@ -113,7 +112,7 @@ CONFIG_MODULE_UNLOAD=y # CONFIG_MODVERSIONS is not set # CONFIG_MODULE_SRCVERSION_ALL is not set CONFIG_BLOCK=y -CONFIG_LBDAF=y +# CONFIG_LBDAF is not set # CONFIG_BLK_DEV_BSG is not set # CONFIG_BLK_DEV_INTEGRITY is not set @@ -542,13 +541,14 @@ CONFIG_INPUT_EVDEV=y # CONFIG_INPUT_KEYBOARD=y # CONFIG_KEYBOARD_ATKBD is not set -# CONFIG_KEYBOARD_SUNKBD is not set # CONFIG_KEYBOARD_LKKBD is not set -# CONFIG_KEYBOARD_XTKBD is not set +# CONFIG_KEYBOARD_GPIO is not set +# CONFIG_KEYBOARD_MATRIX is not set +# CONFIG_KEYBOARD_LM8323 is not set # CONFIG_KEYBOARD_NEWTON is not set # CONFIG_KEYBOARD_STOWAWAY is not set -# CONFIG_KEYBOARD_LM8323 is not set -# CONFIG_KEYBOARD_GPIO is not set +# CONFIG_KEYBOARD_SUNKBD is not set +# CONFIG_KEYBOARD_XTKBD is not set # CONFIG_INPUT_MOUSE is not set # CONFIG_INPUT_JOYSTICK is not set # CONFIG_INPUT_TABLET is not set @@ -911,7 +911,6 @@ CONFIG_REGULATOR=y # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set # CONFIG_XFS_FS is not set -# CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set # CONFIG_BTRFS_FS is not set CONFIG_FILE_LOCKING=y @@ -1122,7 +1121,6 @@ CONFIG_GENERIC_FIND_LAST_BIT=y # CONFIG_CRC32 is not set # CONFIG_CRC7 is not set # CONFIG_LIBCRC32C is not set -CONFIG_GENERIC_ALLOCATOR=y CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y -- cgit v1.2.3 From 6f409461210baf76ade1bfdd9470fd5b98378b36 Mon Sep 17 00:00:00 2001 From: Fenghua Yu Date: Thu, 9 Jul 2009 21:23:39 -0700 Subject: Fix ia64 compilation IS_ERR and PTE_ERR errors. MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit When building ia64 kernel with CONFIG_XEN_SYS_HYPERVISOR, compiler reports errors: drivers/xen/sys-hypervisor.c: In function ‘uuid_show’: drivers/xen/sys-hypervisor.c:125: error: implicit declaration of function ‘IS_ERR’ drivers/xen/sys-hypervisor.c:126: error: implicit declaration of function ‘PTR_ERR’ This patch fixes the errors. Signed-off-by: Fenghua Yu Acked-by: Isaku Yamahata --- arch/ia64/include/asm/xen/hypervisor.h | 1 + 1 file changed, 1 insertion(+) diff --git a/arch/ia64/include/asm/xen/hypervisor.h b/arch/ia64/include/asm/xen/hypervisor.h index e425227a418..88afb54501e 100644 --- a/arch/ia64/include/asm/xen/hypervisor.h +++ b/arch/ia64/include/asm/xen/hypervisor.h @@ -33,6 +33,7 @@ #ifndef _ASM_IA64_XEN_HYPERVISOR_H #define _ASM_IA64_XEN_HYPERVISOR_H +#include #include #include /* to compile feature.c */ #include /* to comiple xen-netfront.c */ -- cgit v1.2.3 From 390bd132b2831a2ad0268e84bffbfc0680debfe5 Mon Sep 17 00:00:00 2001 From: fujita Date: Thu, 9 Jul 2009 21:25:05 -0700 Subject: Add dma_debug_init() for ia64 The commit 9916219579d078c80377dd3988c2cc213536d868 was supposed to add CONFIG_DMA_API_DEBUG support to IA64 however I forgot to add dma_debug_init(). Signed-off-by: fujita Acked-by: Fenghua Yu --- arch/ia64/kernel/dma-mapping.c | 8 ++++++++ 1 file changed, 8 insertions(+) diff --git a/arch/ia64/kernel/dma-mapping.c b/arch/ia64/kernel/dma-mapping.c index 086a2aeb040..39a3cd0a417 100644 --- a/arch/ia64/kernel/dma-mapping.c +++ b/arch/ia64/kernel/dma-mapping.c @@ -6,6 +6,14 @@ int iommu_detected __read_mostly; struct dma_map_ops *dma_ops; EXPORT_SYMBOL(dma_ops); +#define PREALLOC_DMA_DEBUG_ENTRIES (1 << 16) + +static int __init dma_init(void) +{ + dma_debug_init(PREALLOC_DMA_DEBUG_ENTRIES); +} +fs_initcall(dma_init); + struct dma_map_ops *dma_get_ops(struct device *dev) { return dma_ops; -- cgit v1.2.3 From 18282b36d742347abd9a4bc74fe9fd2432a8335b Mon Sep 17 00:00:00 2001 From: Aurelien Jarno Date: Fri, 17 Jul 2009 06:35:05 -0700 Subject: Revert "Neither asm/types.h nor linux/types.h is required for arch/ia64/include/asm/fpu.h" asm/fpu.h uses the __IA64_UL macro which is declared in asm/types.h, so this include is really required. Without it, GNU libc fails to build. This reverts commit 2678c07b07ac2076675e5d57653bdf02e9af1950. Signed-off-by: Aurelien Jarno Acked-by: Fenghua Yu --- arch/ia64/include/asm/fpu.h | 2 ++ 1 file changed, 2 insertions(+) diff --git a/arch/ia64/include/asm/fpu.h b/arch/ia64/include/asm/fpu.h index 0c26157cffa..b6395ad1500 100644 --- a/arch/ia64/include/asm/fpu.h +++ b/arch/ia64/include/asm/fpu.h @@ -6,6 +6,8 @@ * David Mosberger-Tang */ +#include + /* floating point status register: */ #define FPSR_TRAP_VD (1 << 0) /* invalid op trap disabled */ #define FPSR_TRAP_DD (1 << 1) /* denormal trap disabled */ -- cgit v1.2.3 From ecc2e05e739c30870c8e4f252b63a0c4041f2724 Mon Sep 17 00:00:00 2001 From: Alan Cox Date: Fri, 17 Jul 2009 16:17:26 +0100 Subject: tty_port: Fix return on interrupted use Whoops.. fortunately not many people use this yet. Signed-off-by: Alan Cox Signed-off-by: Linus Torvalds --- drivers/char/tty_port.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/char/tty_port.c b/drivers/char/tty_port.c index 4e862a75f7f..9769b1149f7 100644 --- a/drivers/char/tty_port.c +++ b/drivers/char/tty_port.c @@ -267,7 +267,7 @@ int tty_port_block_til_ready(struct tty_port *port, if (retval == 0) port->flags |= ASYNC_NORMAL_ACTIVE; spin_unlock_irqrestore(&port->lock, flags); - return 0; + return retval; } EXPORT_SYMBOL(tty_port_block_til_ready); -- cgit v1.2.3 From 54a8fa62c94d74a8f2d18f99cff95953e5c623b7 Mon Sep 17 00:00:00 2001 From: Ralf Baechle Date: Fri, 17 Jul 2009 04:42:28 +0000 Subject: MAINTAINERS entry for STRIP driver The web server does no longer exist, it's not on archive.org nor does there seem to be any mirror. MAINTAINERS | 1 - 1 files changed, 0 insertions(+), 1 deletions(-) Signed-off-by: David S. Miller --- MAINTAINERS | 1 - 1 file changed, 1 deletion(-) diff --git a/MAINTAINERS b/MAINTAINERS index f608e1debdd..0bd82fa6d2f 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -5539,7 +5539,6 @@ S: Maintained F: drivers/net/starfire* STARMODE RADIO IP (STRIP) PROTOCOL DRIVER -W: http://mosquitonet.Stanford.EDU/strip.html S: Orphan F: drivers/net/wireless/strip.c F: include/linux/if_strip.h -- cgit v1.2.3 From 673325951ef440ebace311bd542a9378d1b3025b Mon Sep 17 00:00:00 2001 From: Ralf Baechle Date: Fri, 17 Jul 2009 04:47:19 +0000 Subject: Update Andreas Koensgen's email address The kernel has used a stale email address of Andreas for a few years. Signed-off-by: Ralf Baechle Signed-off-by: David S. Miller --- CREDITS | 2 +- Documentation/networking/6pack.txt | 2 +- MAINTAINERS | 2 +- drivers/net/hamradio/6pack.c | 2 +- 4 files changed, 4 insertions(+), 4 deletions(-) diff --git a/CREDITS b/CREDITS index 2b88fb37ad5..e76d300e9fe 100644 --- a/CREDITS +++ b/CREDITS @@ -1856,7 +1856,7 @@ E: rfkoenig@immd4.informatik.uni-erlangen.de D: The Linux Support Team Erlangen N: Andreas Koensgen -E: ajk@iehk.rwth-aachen.de +E: ajk@comnets.uni-bremen.de D: 6pack driver for AX.25 N: Harald Koerfgen diff --git a/Documentation/networking/6pack.txt b/Documentation/networking/6pack.txt index d0777a1200e..8f339428fdf 100644 --- a/Documentation/networking/6pack.txt +++ b/Documentation/networking/6pack.txt @@ -1,7 +1,7 @@ This is the 6pack-mini-HOWTO, written by Andreas Könsgen DG3KQ -Internet: ajk@iehk.rwth-aachen.de +Internet: ajk@comnets.uni-bremen.de AMPR-net: dg3kq@db0pra.ampr.org AX.25: dg3kq@db0ach.#nrw.deu.eu diff --git a/MAINTAINERS b/MAINTAINERS index 0bd82fa6d2f..6c6bb95acb1 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -150,7 +150,7 @@ F: drivers/scsi/53c700* 6PACK NETWORK DRIVER FOR AX.25 P: Andreas Koensgen -M: ajk@iehk.rwth-aachen.de +M: ajk@comnets.uni-bremen.de L: linux-hams@vger.kernel.org S: Maintained F: drivers/net/hamradio/6pack.c diff --git a/drivers/net/hamradio/6pack.c b/drivers/net/hamradio/6pack.c index 155160052c8..981ab530e9a 100644 --- a/drivers/net/hamradio/6pack.c +++ b/drivers/net/hamradio/6pack.c @@ -3,7 +3,7 @@ * devices like TTY. It interfaces between a raw TTY and the * kernel's AX.25 protocol layers. * - * Authors: Andreas Könsgen + * Authors: Andreas Könsgen * Ralf Baechle DL5RB * * Quite a lot of stuff "stolen" by Joerg Reuter from slip.c, written by -- cgit v1.2.3 From 241ad11f2d2542723136ffa81cd5db61d590156c Mon Sep 17 00:00:00 2001 From: maximilian attems Date: Sun, 5 Jul 2009 20:17:34 +0200 Subject: kbuild, deb-pkg: fix install scripts for posix sh bash versus dash and posh disagree on expanding $@ within double quotes: export x="$@" see http://bugs.debian.org/381091 for details just use the arglist with $*. dpkg: error processing linux-image-2.6.31-rc1_2.6.31-rc1-18_i386.deb (--install): subprocess pre-installation script returned error exit status 2 export: 6: 2.6.31-rc1-18: bad variable name fixes http://bugzilla.kernel.org/show_bug.cgi?id=13567 seen on Ubuntu as there dash is the default sh, versus bash on Debian. Reported-by: Pauli Cc: Frans Pop Signed-off-by: maximilian attems Acked-By: Andres Salomon --- scripts/package/builddeb | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/scripts/package/builddeb b/scripts/package/builddeb index b19f1f4962e..8b357b0bd25 100644 --- a/scripts/package/builddeb +++ b/scripts/package/builddeb @@ -89,7 +89,7 @@ for script in postinst postrm preinst prerm ; do set -e # Pass maintainer script parameters to hook scripts -export DEB_MAINT_PARAMS="\$@" +export DEB_MAINT_PARAMS="\$*" test -d $debhookdir/$script.d && run-parts --arg="$version" $debhookdir/$script.d exit 0 -- cgit v1.2.3 From 668cdedfdb2eb00d8efe127618bead4d46d9e942 Mon Sep 17 00:00:00 2001 From: Arnaud Lacombe Date: Mon, 6 Jul 2009 00:07:14 -0400 Subject: kconfig: variable argument lists needs `stdarg.h' Fix build on non GNU based platforms. Cc: Roman Zippel Signed-off-by: Sam Ravnborg --- scripts/kconfig/lxdialog/util.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/scripts/kconfig/lxdialog/util.c b/scripts/kconfig/lxdialog/util.c index 86d95cca46a..f2375ad7ebc 100644 --- a/scripts/kconfig/lxdialog/util.c +++ b/scripts/kconfig/lxdialog/util.c @@ -19,6 +19,8 @@ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. */ +#include + #include "dialog.h" struct dialog_info dlg; -- cgit v1.2.3 From d0e1e09568507ac771072d97f0781af82c935b3e Mon Sep 17 00:00:00 2001 From: Arnaud Lacombe Date: Mon, 6 Jul 2009 00:07:28 -0400 Subject: kconfig: initialize the screen before using curses(3) functions This is needed on non ncurses based implementation to get a properly initialized `stdscr' in main(). Cc: Roman Zippel Signed-off-by: Sam Ravnborg --- scripts/kconfig/mconf.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/scripts/kconfig/mconf.c b/scripts/kconfig/mconf.c index 3bcacb4bfd3..25b60bc117f 100644 --- a/scripts/kconfig/mconf.c +++ b/scripts/kconfig/mconf.c @@ -888,6 +888,8 @@ int main(int ac, char **av) single_menu_mode = 1; } + initscr(); + getyx(stdscr, saved_y, saved_x); if (init_dialog(NULL)) { fprintf(stderr, N_("Your display is too small to run Menuconfig!\n")); -- cgit v1.2.3 From 04e448d9a386640a79a4aa71251aa1cdd314f662 Mon Sep 17 00:00:00 2001 From: Tim Abbott Date: Sun, 12 Jul 2009 18:23:33 -0400 Subject: vmlinux.lds.h: restructure BSS linker script macros The BSS section macros in vmlinux.lds.h currently place the .sbss input section outside the bounds of [__bss_start, __bss_end]. On all architectures except for microblaze that handle both .sbss and __bss_start/__bss_end, this is wrong: the .sbss input section is within the range [__bss_start, __bss_end]. Relatedly, the example code at the top of the file actually has __bss_start/__bss_end defined twice; I believe the right fix here is to define them in the BSS_SECTION macro but not in the BSS macro. Another problem with the current macros is that several architectures have an ALIGN(4) or some other small number just before __bss_stop in their linker scripts. The BSS_SECTION macro currently hardcodes this to 4; while it should really be an argument. It also ignores its sbss_align argument; fix that. mn10300 is the only user at present of any of the macros touched by this patch. It looks like mn10300 actually was incorrectly converted to use the new BSS() macro (the alignment of 4 prior to conversion was a __bss_stop alignment, but the argument to the BSS macro is a start alignment). So fix this as well. I'd like acks from Sam and David on this one. Also CCing Paul, since he has a patch from me which will need to be updated to use BSS_SECTION(0, PAGE_SIZE, 4) once this gets merged. Signed-off-by: Tim Abbott Cc: Paul Mundt Cc: David Howells Signed-off-by: Sam Ravnborg --- arch/mn10300/kernel/vmlinux.lds.S | 2 +- include/asm-generic/vmlinux.lds.h | 19 +++++++++---------- 2 files changed, 10 insertions(+), 11 deletions(-) diff --git a/arch/mn10300/kernel/vmlinux.lds.S b/arch/mn10300/kernel/vmlinux.lds.S index c96ba3da95a..f4aa0793465 100644 --- a/arch/mn10300/kernel/vmlinux.lds.S +++ b/arch/mn10300/kernel/vmlinux.lds.S @@ -107,7 +107,7 @@ SECTIONS __init_end = .; /* freed after init ends here */ - BSS(4) + BSS_SECTION(0, PAGE_SIZE, 4) _end = . ; diff --git a/include/asm-generic/vmlinux.lds.h b/include/asm-generic/vmlinux.lds.h index a553f1041cf..6ad76bf5fb4 100644 --- a/include/asm-generic/vmlinux.lds.h +++ b/include/asm-generic/vmlinux.lds.h @@ -30,9 +30,7 @@ * EXCEPTION_TABLE(...) * NOTES * - * __bss_start = .; - * BSS_SECTION(0, 0) - * __bss_stop = .; + * BSS_SECTION(0, 0, 0) * _end = .; * * /DISCARD/ : { @@ -489,7 +487,8 @@ * bss (Block Started by Symbol) - uninitialized data * zeroed during startup */ -#define SBSS \ +#define SBSS(sbss_align) \ + . = ALIGN(sbss_align); \ .sbss : AT(ADDR(.sbss) - LOAD_OFFSET) { \ *(.sbss) \ *(.scommon) \ @@ -498,12 +497,10 @@ #define BSS(bss_align) \ . = ALIGN(bss_align); \ .bss : AT(ADDR(.bss) - LOAD_OFFSET) { \ - VMLINUX_SYMBOL(__bss_start) = .; \ *(.bss.page_aligned) \ *(.dynbss) \ *(.bss) \ *(COMMON) \ - VMLINUX_SYMBOL(__bss_stop) = .; \ } /* @@ -735,8 +732,10 @@ INIT_RAM_FS \ } -#define BSS_SECTION(sbss_align, bss_align) \ - SBSS \ +#define BSS_SECTION(sbss_align, bss_align, stop_align) \ + . = ALIGN(sbss_align); \ + VMLINUX_SYMBOL(__bss_start) = .; \ + SBSS(sbss_align) \ BSS(bss_align) \ - . = ALIGN(4); - + . = ALIGN(stop_align); \ + VMLINUX_SYMBOL(__bss_stop) = .; -- cgit v1.2.3 From c197cec5fae7968a7154ee999f0a1b07938d1528 Mon Sep 17 00:00:00 2001 From: Ben Dooks Date: Sat, 18 Jul 2009 10:12:25 +0100 Subject: ARM: S3C: Update hwmon device definition and name Change the hwmon device name to something more generic as this should be functional for both the s3c24xx and s3c64xx archs. Since it has yet to have a driver, it is pretty safe to change as there are no extant users. Also add the necessary entry in devs.h which seems to have been missed out at somepoint. Signed-off-by: Ben Dooks Signed-off-by: Ben Dooks --- arch/arm/plat-s3c/include/plat/devs.h | 2 ++ arch/arm/plat-s3c24xx/devs.c | 2 +- 2 files changed, 3 insertions(+), 1 deletion(-) diff --git a/arch/arm/plat-s3c/include/plat/devs.h b/arch/arm/plat-s3c/include/plat/devs.h index 2e170827e0b..1989ca1bb2b 100644 --- a/arch/arm/plat-s3c/include/plat/devs.h +++ b/arch/arm/plat-s3c/include/plat/devs.h @@ -46,6 +46,8 @@ extern struct platform_device s3c_device_hsmmc2; extern struct platform_device s3c_device_spi0; extern struct platform_device s3c_device_spi1; +extern struct platform_device s3c_device_hwmon; + extern struct platform_device s3c_device_nand; extern struct platform_device s3c_device_usbgadget; diff --git a/arch/arm/plat-s3c24xx/devs.c b/arch/arm/plat-s3c24xx/devs.c index 4eb378c89a3..3489019b537 100644 --- a/arch/arm/plat-s3c24xx/devs.c +++ b/arch/arm/plat-s3c24xx/devs.c @@ -348,7 +348,7 @@ struct platform_device s3c_device_adc = { /* HWMON */ struct platform_device s3c_device_hwmon = { - .name = "s3c24xx-hwmon", + .name = "s3c-hwmon", .id = -1, .dev.parent = &s3c_device_adc.dev, }; -- cgit v1.2.3 From 885f9ebe7554628967b6e93b284dd3021e1bb280 Mon Sep 17 00:00:00 2001 From: Ben Dooks Date: Sat, 18 Jul 2009 10:12:26 +0100 Subject: ARM: BAST: Add hwmon device information Add platform device information for the ADC channels to be exported via HWMON. This exports all the ADCs not being used for the touchscreen interface. Signed-off-by: Ben Dooks Signed-off-by: Ben Dooks --- arch/arm/mach-s3c2410/mach-bast.c | 32 ++++++++++++++++++++++++++++++++ 1 file changed, 32 insertions(+) diff --git a/arch/arm/mach-s3c2410/mach-bast.c b/arch/arm/mach-s3c2410/mach-bast.c index ce3baba2cd7..06670bb89ca 100644 --- a/arch/arm/mach-s3c2410/mach-bast.c +++ b/arch/arm/mach-s3c2410/mach-bast.c @@ -45,6 +45,7 @@ #include #include +#include #include #include #include @@ -547,7 +548,35 @@ static struct i2c_board_info bast_i2c_devs[] __initdata = { }, }; +static struct s3c_hwmon_pdata bast_hwmon_info = { + /* LCD contrast (0-6.6V) */ + .in[0] = &(struct s3c_hwmon_chcfg) { + .name = "lcd-contrast", + .mult = 3300, + .div = 512, + }, + /* LED current feedback */ + .in[1] = &(struct s3c_hwmon_chcfg) { + .name = "led-feedback", + .mult = 3300, + .div = 1024, + }, + /* LCD feedback (0-6.6V) */ + .in[2] = &(struct s3c_hwmon_chcfg) { + .name = "lcd-feedback", + .mult = 3300, + .div = 512, + }, + /* Vcore (1.8-2.0V), Vref 3.3V */ + .in[3] = &(struct s3c_hwmon_chcfg) { + .name = "vcore", + .mult = 3300, + .div = 1024, + }, +}; + /* Standard BAST devices */ +// cat /sys/devices/platform/s3c24xx-adc/s3c-hwmon/in_0 static struct platform_device *bast_devices[] __initdata = { &s3c_device_usb, @@ -556,6 +585,8 @@ static struct platform_device *bast_devices[] __initdata = { &s3c_device_i2c0, &s3c_device_rtc, &s3c_device_nand, + &s3c_device_adc, + &s3c_device_hwmon, &bast_device_dm9k, &bast_device_asix, &bast_device_axpp, @@ -588,6 +619,7 @@ static void __init bast_map_io(void) s3c24xx_register_clocks(bast_clocks, ARRAY_SIZE(bast_clocks)); s3c_device_nand.dev.platform_data = &bast_nand_info; + s3c_device_hwmon.dev.platform_data = &bast_hwmon_info; s3c24xx_init_io(bast_iodesc, ARRAY_SIZE(bast_iodesc)); s3c24xx_init_clocks(0); -- cgit v1.2.3 From e170adcb406504b8acd35554c69830c11916be1f Mon Sep 17 00:00:00 2001 From: Ben Dooks Date: Sat, 18 Jul 2009 10:12:27 +0100 Subject: ARM: S3C: Add ADC synchronous read call. To add HWMON support, we need a synchronous read() call that blocks until completion. Add the client that is being service to the select and convert callbacks to make the code easier. Signed-off-by: Ben Dooks Signed-off-by: Ben Dooks --- arch/arm/plat-s3c/include/plat/adc.h | 8 +++-- arch/arm/plat-s3c24xx/adc.c | 64 +++++++++++++++++++++++++++++------- 2 files changed, 59 insertions(+), 13 deletions(-) diff --git a/arch/arm/plat-s3c/include/plat/adc.h b/arch/arm/plat-s3c/include/plat/adc.h index d847bd476b6..5f3b1cd53b9 100644 --- a/arch/arm/plat-s3c/include/plat/adc.h +++ b/arch/arm/plat-s3c/include/plat/adc.h @@ -19,10 +19,14 @@ struct s3c_adc_client; extern int s3c_adc_start(struct s3c_adc_client *client, unsigned int channel, unsigned int nr_samples); +extern int s3c_adc_read(struct s3c_adc_client *client, unsigned int ch); + extern struct s3c_adc_client * s3c_adc_register(struct platform_device *pdev, - void (*select)(unsigned selected), - void (*conv)(unsigned d0, unsigned d1, + void (*select)(struct s3c_adc_client *client, + unsigned selected), + void (*conv)(struct s3c_adc_client *client, + unsigned d0, unsigned d1, unsigned *samples_left), unsigned int is_ts); diff --git a/arch/arm/plat-s3c24xx/adc.c b/arch/arm/plat-s3c24xx/adc.c index ee1baf11ad9..11117a7ba91 100644 --- a/arch/arm/plat-s3c24xx/adc.c +++ b/arch/arm/plat-s3c24xx/adc.c @@ -39,13 +39,16 @@ struct s3c_adc_client { struct platform_device *pdev; struct list_head pend; + wait_queue_head_t *wait; unsigned int nr_samples; + int result; unsigned char is_ts; unsigned char channel; - void (*select_cb)(unsigned selected); - void (*convert_cb)(unsigned val1, unsigned val2, + void (*select_cb)(struct s3c_adc_client *c, unsigned selected); + void (*convert_cb)(struct s3c_adc_client *c, + unsigned val1, unsigned val2, unsigned *samples_left); }; @@ -81,7 +84,7 @@ static inline void s3c_adc_select(struct adc_device *adc, { unsigned con = readl(adc->regs + S3C2410_ADCCON); - client->select_cb(1); + client->select_cb(client, 1); con &= ~S3C2410_ADCCON_MUXMASK; con &= ~S3C2410_ADCCON_STDBM; @@ -153,25 +156,61 @@ int s3c_adc_start(struct s3c_adc_client *client, } EXPORT_SYMBOL_GPL(s3c_adc_start); -static void s3c_adc_default_select(unsigned select) +static void s3c_convert_done(struct s3c_adc_client *client, + unsigned v, unsigned u, unsigned *left) +{ + client->result = v; + wake_up(client->wait); +} + +int s3c_adc_read(struct s3c_adc_client *client, unsigned int ch) +{ + DECLARE_WAIT_QUEUE_HEAD_ONSTACK(wake); + int ret; + + client->convert_cb = s3c_convert_done; + client->wait = &wake; + client->result = -1; + + ret = s3c_adc_start(client, ch, 1); + if (ret < 0) + goto err; + + ret = wait_event_timeout(wake, client->result >= 0, HZ / 2); + if (client->result < 0) { + ret = -ETIMEDOUT; + goto err; + } + + client->convert_cb = NULL; + return client->result; + +err: + return ret; +} +EXPORT_SYMBOL_GPL(s3c_adc_convert); + +static void s3c_adc_default_select(struct s3c_adc_client *client, + unsigned select) { } struct s3c_adc_client *s3c_adc_register(struct platform_device *pdev, - void (*select)(unsigned int selected), - void (*conv)(unsigned d0, unsigned d1, + void (*select)(struct s3c_adc_client *client, + unsigned int selected), + void (*conv)(struct s3c_adc_client *client, + unsigned d0, unsigned d1, unsigned *samples_left), unsigned int is_ts) { struct s3c_adc_client *client; WARN_ON(!pdev); - WARN_ON(!conv); if (!select) select = s3c_adc_default_select; - if (!conv || !pdev) + if (!pdev) return ERR_PTR(-EINVAL); client = kzalloc(sizeof(struct s3c_adc_client), GFP_KERNEL); @@ -230,16 +269,19 @@ static irqreturn_t s3c_adc_irq(int irq, void *pw) adc_dbg(adc, "read %d: 0x%04x, 0x%04x\n", client->nr_samples, data0, data1); client->nr_samples--; - (client->convert_cb)(data0 & 0x3ff, data1 & 0x3ff, &client->nr_samples); + + if (client->convert_cb) + (client->convert_cb)(client, data0 & 0x3ff, data1 & 0x3ff, + &client->nr_samples); if (client->nr_samples > 0) { /* fire another conversion for this */ - client->select_cb(1); + client->select_cb(client, 1); s3c_adc_convert(adc); } else { local_irq_save(flags); - (client->select_cb)(0); + (client->select_cb)(client, 0); adc->cur = NULL; s3c_adc_try(adc); -- cgit v1.2.3 From bff78650a2b0ed42b8fb134b6a9b387e00027d67 Mon Sep 17 00:00:00 2001 From: Ben Dooks Date: Sat, 18 Jul 2009 10:12:28 +0100 Subject: ARM: HWMON: S3C24XX series ADC driver Add support for the ADC controller on the S3C series of processors to drivers/hwmon for use with hardware monitoring systems. Signed-off-by: Ben Dooks Acked-by: Jean Delvare Signed-off-by: Ben Dooks --- arch/arm/plat-s3c/include/plat/hwmon.h | 41 ++++ drivers/hwmon/Kconfig | 17 ++ drivers/hwmon/Makefile | 1 + drivers/hwmon/s3c-hwmon.c | 405 +++++++++++++++++++++++++++++++++ 4 files changed, 464 insertions(+) create mode 100644 arch/arm/plat-s3c/include/plat/hwmon.h create mode 100644 drivers/hwmon/s3c-hwmon.c diff --git a/arch/arm/plat-s3c/include/plat/hwmon.h b/arch/arm/plat-s3c/include/plat/hwmon.h new file mode 100644 index 00000000000..1ba88ea0aa3 --- /dev/null +++ b/arch/arm/plat-s3c/include/plat/hwmon.h @@ -0,0 +1,41 @@ +/* linux/arch/arm/plat-s3c/include/plat/hwmon.h + * + * Copyright 2005 Simtec Electronics + * Ben Dooks + * http://armlinux.simtec.co.uk/ + * + * S3C - HWMon interface for ADC + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#ifndef __ASM_ARCH_ADC_HWMON_H +#define __ASM_ARCH_ADC_HWMON_H __FILE__ + +/** + * s3c_hwmon_chcfg - channel configuration + * @name: The name to give this channel. + * @mult: Multiply the ADC value read by this. + * @div: Divide the value from the ADC by this. + * + * The value read from the ADC is converted to a value that + * hwmon expects (mV) by result = (value_read * @mult) / @div. + */ +struct s3c_hwmon_chcfg { + const char *name; + unsigned int mult; + unsigned int div; +}; + +/** + * s3c_hwmon_pdata - HWMON platform data + * @in: One configuration for each possible channel used. + */ +struct s3c_hwmon_pdata { + struct s3c_hwmon_chcfg *in[8]; +}; + +#endif /* __ASM_ARCH_ADC_HWMON_H */ + diff --git a/drivers/hwmon/Kconfig b/drivers/hwmon/Kconfig index 2d5016691d4..2e25b7a827d 100644 --- a/drivers/hwmon/Kconfig +++ b/drivers/hwmon/Kconfig @@ -702,6 +702,23 @@ config SENSORS_SHT15 This driver can also be built as a module. If so, the module will be called sht15. +config SENSORS_S3C + tristate "S3C24XX/S3C64XX Inbuilt ADC" + depends on ARCH_S3C2410 || ARCH_S3C64XX + help + If you say yes here you get support for the on-board ADCs of + the Samsung S3C24XX or S3C64XX series of SoC + + This driver can also be built as a module. If so, the module + will be called s3c-hwmo. + +config SENSORS_S3C_RAW + bool "Include raw channel attributes in sysfs" + depends on SENSORS_S3C + help + Say Y here if you want to include raw copies of all the ADC + channels in sysfs. + config SENSORS_SIS5595 tristate "Silicon Integrated Systems Corp. SiS5595" depends on PCI diff --git a/drivers/hwmon/Makefile b/drivers/hwmon/Makefile index b793dce6bed..7f239a247c3 100644 --- a/drivers/hwmon/Makefile +++ b/drivers/hwmon/Makefile @@ -76,6 +76,7 @@ obj-$(CONFIG_SENSORS_MAX6650) += max6650.o obj-$(CONFIG_SENSORS_PC87360) += pc87360.o obj-$(CONFIG_SENSORS_PC87427) += pc87427.o obj-$(CONFIG_SENSORS_PCF8591) += pcf8591.o +obj-$(CONFIG_SENSORS_S3C) += s3c-hwmon.o obj-$(CONFIG_SENSORS_SHT15) += sht15.o obj-$(CONFIG_SENSORS_SIS5595) += sis5595.o obj-$(CONFIG_SENSORS_SMSC47B397)+= smsc47b397.o diff --git a/drivers/hwmon/s3c-hwmon.c b/drivers/hwmon/s3c-hwmon.c new file mode 100644 index 00000000000..3a524f2fe49 --- /dev/null +++ b/drivers/hwmon/s3c-hwmon.c @@ -0,0 +1,405 @@ +/* linux/drivers/hwmon/s3c-hwmon.c + * + * Copyright (C) 2005, 2008, 2009 Simtec Electronics + * http://armlinux.simtec.co.uk/ + * Ben Dooks + * + * S3C24XX/S3C64XX ADC hwmon support + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA +*/ + +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include + +#include +#include + +struct s3c_hwmon_attr { + struct sensor_device_attribute in; + struct sensor_device_attribute label; + char in_name[12]; + char label_name[12]; +}; + +/** + * struct s3c_hwmon - ADC hwmon client information + * @lock: Access lock to serialise the conversions. + * @client: The client we registered with the S3C ADC core. + * @hwmon_dev: The hwmon device we created. + * @attr: The holders for the channel attributes. +*/ +struct s3c_hwmon { + struct semaphore lock; + struct s3c_adc_client *client; + struct device *hwmon_dev; + + struct s3c_hwmon_attr attrs[8]; +}; + +/** + * s3c_hwmon_read_ch - read a value from a given adc channel. + * @dev: The device. + * @hwmon: Our state. + * @channel: The channel we're reading from. + * + * Read a value from the @channel with the proper locking and sleep until + * either the read completes or we timeout awaiting the ADC core to get + * back to us. + */ +static int s3c_hwmon_read_ch(struct device *dev, + struct s3c_hwmon *hwmon, int channel) +{ + int ret; + + ret = down_interruptible(&hwmon->lock); + if (ret < 0) + return ret; + + dev_dbg(dev, "reading channel %d\n", channel); + + ret = s3c_adc_read(hwmon->client, channel); + up(&hwmon->lock); + + return ret; +} + +#ifdef CONFIG_SENSORS_S3C_RAW +/** + * s3c_hwmon_show_raw - show a conversion from the raw channel number. + * @dev: The device that the attribute belongs to. + * @attr: The attribute being read. + * @buf: The result buffer. + * + * This show deals with the raw attribute, registered for each possible + * ADC channel. This does a conversion and returns the raw (un-scaled) + * value returned from the hardware. + */ +static ssize_t s3c_hwmon_show_raw(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct s3c_hwmon *adc = platform_get_drvdata(to_platform_device(dev)); + struct sensor_device_attribute *sa = to_sensor_dev_attr(attr); + int ret; + + ret = s3c_hwmon_read_ch(dev, adc, sa->index); + + return (ret < 0) ? ret : snprintf(buf, PAGE_SIZE, "%d\n", ret); +} + +#define DEF_ADC_ATTR(x) \ + static SENSOR_DEVICE_ATTR(adc##x##_raw, S_IRUGO, s3c_hwmon_show_raw, NULL, x) + +DEF_ADC_ATTR(0); +DEF_ADC_ATTR(1); +DEF_ADC_ATTR(2); +DEF_ADC_ATTR(3); +DEF_ADC_ATTR(4); +DEF_ADC_ATTR(5); +DEF_ADC_ATTR(6); +DEF_ADC_ATTR(7); + +static struct attribute *s3c_hwmon_attrs[9] = { + &sensor_dev_attr_adc0_raw.dev_attr.attr, + &sensor_dev_attr_adc1_raw.dev_attr.attr, + &sensor_dev_attr_adc2_raw.dev_attr.attr, + &sensor_dev_attr_adc3_raw.dev_attr.attr, + &sensor_dev_attr_adc4_raw.dev_attr.attr, + &sensor_dev_attr_adc5_raw.dev_attr.attr, + &sensor_dev_attr_adc6_raw.dev_attr.attr, + &sensor_dev_attr_adc7_raw.dev_attr.attr, + NULL, +}; + +static struct attribute_group s3c_hwmon_attrgroup = { + .attrs = s3c_hwmon_attrs, +}; + +static inline int s3c_hwmon_add_raw(struct device *dev) +{ + return sysfs_create_group(&dev->kobj, &s3c_hwmon_attrgroup); +} + +static inline void s3c_hwmon_remove_raw(struct device *dev) +{ + sysfs_remove_group(&dev->kobj, &s3c_hwmon_attrgroup); +} + +#else + +static inline int s3c_hwmon_add_raw(struct device *dev) { return 0; } +static inline void s3c_hwmon_remove_raw(struct device *dev) { } + +#endif /* CONFIG_SENSORS_S3C_RAW */ + +/** + * s3c_hwmon_ch_show - show value of a given channel + * @dev: The device that the attribute belongs to. + * @attr: The attribute being read. + * @buf: The result buffer. + * + * Read a value from the ADC and scale it before returning it to the + * caller. The scale factor is gained from the channel configuration + * passed via the platform data when the device was registered. + */ +static ssize_t s3c_hwmon_ch_show(struct device *dev, + struct device_attribute *attr, + char *buf) +{ + struct sensor_device_attribute *sen_attr = to_sensor_dev_attr(attr); + struct s3c_hwmon *hwmon = platform_get_drvdata(to_platform_device(dev)); + struct s3c_hwmon_pdata *pdata = dev->platform_data; + struct s3c_hwmon_chcfg *cfg; + int ret; + + cfg = pdata->in[sen_attr->index]; + + ret = s3c_hwmon_read_ch(dev, hwmon, sen_attr->index); + if (ret < 0) + return ret; + + ret *= cfg->mult; + ret = DIV_ROUND_CLOSEST(ret, cfg->div); + + return snprintf(buf, PAGE_SIZE, "%d\n", ret); +} + +/** + * s3c_hwmon_label_show - show label name of the given channel. + * @dev: The device that the attribute belongs to. + * @attr: The attribute being read. + * @buf: The result buffer. + * + * Return the label name of a given channel + */ +static ssize_t s3c_hwmon_label_show(struct device *dev, + struct device_attribute *attr, + char *buf) +{ + struct sensor_device_attribute *sen_attr = to_sensor_dev_attr(attr); + struct s3c_hwmon_pdata *pdata = dev->platform_data; + struct s3c_hwmon_chcfg *cfg; + + cfg = pdata->in[sen_attr->index]; + + return snprintf(buf, PAGE_SIZE, "%s\n", cfg->name); +} + +/** + * s3c_hwmon_create_attr - create hwmon attribute for given channel. + * @dev: The device to create the attribute on. + * @cfg: The channel configuration passed from the platform data. + * @channel: The ADC channel number to process. + * + * Create the scaled attribute for use with hwmon from the specified + * platform data in @pdata. The sysfs entry is handled by the routine + * s3c_hwmon_ch_show(). + * + * The attribute name is taken from the configuration data if present + * otherwise the name is taken by concatenating in_ with the channel + * number. + */ +static int s3c_hwmon_create_attr(struct device *dev, + struct s3c_hwmon_chcfg *cfg, + struct s3c_hwmon_attr *attrs, + int channel) +{ + struct sensor_device_attribute *attr; + int ret; + + snprintf(attrs->in_name, sizeof(attrs->in_name), "in%d_input", channel); + + attr = &attrs->in; + attr->index = channel; + attr->dev_attr.attr.name = attrs->in_name; + attr->dev_attr.attr.mode = S_IRUGO; + attr->dev_attr.attr.owner = THIS_MODULE; + attr->dev_attr.show = s3c_hwmon_ch_show; + + ret = device_create_file(dev, &attr->dev_attr); + if (ret < 0) { + dev_err(dev, "failed to create input attribute\n"); + return ret; + } + + /* if this has a name, add a label */ + if (cfg->name) { + snprintf(attrs->label_name, sizeof(attrs->label_name), + "in%d_label", channel); + + attr = &attrs->label; + attr->index = channel; + attr->dev_attr.attr.name = attrs->label_name; + attr->dev_attr.attr.mode = S_IRUGO; + attr->dev_attr.attr.owner = THIS_MODULE; + attr->dev_attr.show = s3c_hwmon_label_show; + + ret = device_create_file(dev, &attr->dev_attr); + if (ret < 0) { + device_remove_file(dev, &attrs->in.dev_attr); + dev_err(dev, "failed to create label attribute\n"); + } + } + + return ret; +} + +static void s3c_hwmon_remove_attr(struct device *dev, + struct s3c_hwmon_attr *attrs) +{ + device_remove_file(dev, &attrs->in.dev_attr); + device_remove_file(dev, &attrs->label.dev_attr); +} + +/** + * s3c_hwmon_probe - device probe entry. + * @dev: The device being probed. +*/ +static int __devinit s3c_hwmon_probe(struct platform_device *dev) +{ + struct s3c_hwmon_pdata *pdata = dev->dev.platform_data; + struct s3c_hwmon *hwmon; + int ret = 0; + int i; + + if (!pdata) { + dev_err(&dev->dev, "no platform data supplied\n"); + return -EINVAL; + } + + hwmon = kzalloc(sizeof(struct s3c_hwmon), GFP_KERNEL); + if (hwmon == NULL) { + dev_err(&dev->dev, "no memory\n"); + return -ENOMEM; + } + + platform_set_drvdata(dev, hwmon); + + init_MUTEX(&hwmon->lock); + + /* Register with the core ADC driver. */ + + hwmon->client = s3c_adc_register(dev, NULL, NULL, 0); + if (IS_ERR(hwmon->client)) { + dev_err(&dev->dev, "cannot register adc\n"); + ret = PTR_ERR(hwmon->client); + goto err_mem; + } + + /* add attributes for our adc devices. */ + + ret = s3c_hwmon_add_raw(&dev->dev); + if (ret) + goto err_registered; + + /* register with the hwmon core */ + + hwmon->hwmon_dev = hwmon_device_register(&dev->dev); + if (IS_ERR(hwmon->hwmon_dev)) { + dev_err(&dev->dev, "error registering with hwmon\n"); + ret = PTR_ERR(hwmon->hwmon_dev); + goto err_raw_attribute; + } + + for (i = 0; i < ARRAY_SIZE(pdata->in); i++) { + if (!pdata->in[i]) + continue; + + if (pdata->in[i]->mult >= 0x10000) + dev_warn(&dev->dev, + "channel %d multiplier too large\n", + i); + + ret = s3c_hwmon_create_attr(&dev->dev, pdata->in[i], + &hwmon->attrs[i], i); + if (ret) { + dev_err(&dev->dev, + "error creating channel %d\n", i); + + for (i--; i >= 0; i--) + s3c_hwmon_remove_attr(&dev->dev, + &hwmon->attrs[i]); + + goto err_hwmon_register; + } + } + + return 0; + + err_hwmon_register: + hwmon_device_unregister(hwmon->hwmon_dev); + + err_raw_attribute: + s3c_hwmon_remove_raw(&dev->dev); + + err_registered: + s3c_adc_release(hwmon->client); + + err_mem: + kfree(hwmon); + return ret; +} + +static int __devexit s3c_hwmon_remove(struct platform_device *dev) +{ + struct s3c_hwmon *hwmon = platform_get_drvdata(dev); + int i; + + s3c_hwmon_remove_raw(&dev->dev); + + for (i = 0; i < ARRAY_SIZE(hwmon->attrs); i++) + s3c_hwmon_remove_attr(&dev->dev, &hwmon->attrs[i]); + + hwmon_device_unregister(hwmon->hwmon_dev); + s3c_adc_release(hwmon->client); + + return 0; +} + +static struct platform_driver s3c_hwmon_driver = { + .driver = { + .name = "s3c-hwmon", + .owner = THIS_MODULE, + }, + .probe = s3c_hwmon_probe, + .remove = __devexit_p(s3c_hwmon_remove), +}; + +static int __init s3c_hwmon_init(void) +{ + return platform_driver_register(&s3c_hwmon_driver); +} + +static void __exit s3c_hwmon_exit(void) +{ + platform_driver_unregister(&s3c_hwmon_driver); +} + +module_init(s3c_hwmon_init); +module_exit(s3c_hwmon_exit); + +MODULE_AUTHOR("Ben Dooks "); +MODULE_DESCRIPTION("S3C ADC HWMon driver"); +MODULE_LICENSE("GPL v2"); +MODULE_ALIAS("platform:s3c-hwmon"); -- cgit v1.2.3 From 54fdc5816631b43ba55fc3206d7add2d85850bc6 Mon Sep 17 00:00:00 2001 From: Fabio Checconi Date: Thu, 16 Jul 2009 12:32:27 +0200 Subject: sched: Account for vruntime wrapping I spotted two sites that didn't take vruntime wrap-around into account. Fix these by creating a comparison helper that does do so. Signed-off-by: Fabio Checconi Signed-off-by: Peter Zijlstra LKML-Reference: Signed-off-by: Ingo Molnar --- kernel/sched_fair.c | 10 ++++++++-- 1 file changed, 8 insertions(+), 2 deletions(-) diff --git a/kernel/sched_fair.c b/kernel/sched_fair.c index 7c248dc30f4..9ffb2b2ceba 100644 --- a/kernel/sched_fair.c +++ b/kernel/sched_fair.c @@ -266,6 +266,12 @@ static inline u64 min_vruntime(u64 min_vruntime, u64 vruntime) return min_vruntime; } +static inline int entity_before(struct sched_entity *a, + struct sched_entity *b) +{ + return (s64)(a->vruntime - b->vruntime) < 0; +} + static inline s64 entity_key(struct cfs_rq *cfs_rq, struct sched_entity *se) { return se->vruntime - cfs_rq->min_vruntime; @@ -1017,7 +1023,7 @@ static void yield_task_fair(struct rq *rq) /* * Already in the rightmost position? */ - if (unlikely(!rightmost || rightmost->vruntime < se->vruntime)) + if (unlikely(!rightmost || entity_before(rightmost, se))) return; /* @@ -1713,7 +1719,7 @@ static void task_new_fair(struct rq *rq, struct task_struct *p) /* 'curr' will be NULL if the child belongs to a different group */ if (sysctl_sched_child_runs_first && this_cpu == task_cpu(p) && - curr && curr->vruntime < se->vruntime) { + curr && entity_before(curr, se)) { /* * Upon rescheduling, sched_class::put_prev_task() will place * 'current' within the tree based on its new key value. -- cgit v1.2.3 From 413ee3b48ab582ffea33e7e140c7a2c5ea657e9a Mon Sep 17 00:00:00 2001 From: Anton Blanchard Date: Thu, 16 Jul 2009 15:15:52 +0200 Subject: perf_counter: Make sure we dont leak kernel memory to userspace There are a few places we are leaking tiny amounts of kernel memory to userspace. This happens when writing out strings because we always align the end to 64 bits. To avoid this we should always use an appropriately sized temporary buffer and ensure it is zeroed. Since d_path assembles the string from the end of the buffer backwards, we need to add 64 bits after the buffer to allow for alignment. We also need to copy arch_vma_name to the temporary buffer, because if we use it directly we may end up copying to userspace a number of bytes after the end of the string constant. Signed-off-by: Anton Blanchard Signed-off-by: Peter Zijlstra LKML-Reference: <20090716104817.273972048@samba.org> Signed-off-by: Ingo Molnar --- kernel/perf_counter.c | 19 +++++++++++++++---- 1 file changed, 15 insertions(+), 4 deletions(-) diff --git a/kernel/perf_counter.c b/kernel/perf_counter.c index c6c38fb7766..f7a8ab9576e 100644 --- a/kernel/perf_counter.c +++ b/kernel/perf_counter.c @@ -2968,8 +2968,10 @@ static void perf_counter_comm_event(struct perf_comm_event *comm_event) struct perf_cpu_context *cpuctx; struct perf_counter_context *ctx; unsigned int size; - char *comm = comm_event->task->comm; + char comm[TASK_COMM_LEN]; + memset(comm, 0, sizeof(comm)); + strncpy(comm, comm_event->task->comm, sizeof(comm)); size = ALIGN(strlen(comm)+1, sizeof(u64)); comm_event->comm = comm; @@ -3088,8 +3090,15 @@ static void perf_counter_mmap_event(struct perf_mmap_event *mmap_event) char *buf = NULL; const char *name; + memset(tmp, 0, sizeof(tmp)); + if (file) { - buf = kzalloc(PATH_MAX, GFP_KERNEL); + /* + * d_path works from the end of the buffer backwards, so we + * need to add enough zero bytes after the string to handle + * the 64bit alignment we do later. + */ + buf = kzalloc(PATH_MAX + sizeof(u64), GFP_KERNEL); if (!buf) { name = strncpy(tmp, "//enomem", sizeof(tmp)); goto got_name; @@ -3100,9 +3109,11 @@ static void perf_counter_mmap_event(struct perf_mmap_event *mmap_event) goto got_name; } } else { - name = arch_vma_name(mmap_event->vma); - if (name) + if (arch_vma_name(mmap_event->vma)) { + name = strncpy(tmp, arch_vma_name(mmap_event->vma), + sizeof(tmp)); goto got_name; + } if (!vma->vm_mm) { name = strncpy(tmp, "[vdso]", sizeof(tmp)); -- cgit v1.2.3 From 11b5f81e1b0ea0bc84fe32f0a27054e052b2bf84 Mon Sep 17 00:00:00 2001 From: Anton Blanchard Date: Thu, 16 Jul 2009 15:44:29 +0200 Subject: perf_counter: Synthesize VDSO mmap event perf record synthesizes mmap events for the running process. Right now it just catches file mappings, but we can check for the vdso symbol and add that too. Signed-off-by: Anton Blanchard Signed-off-by: Peter Zijlstra LKML-Reference: <20090716104817.517264409@samba.org> Signed-off-by: Ingo Molnar --- tools/perf/builtin-record.c | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/tools/perf/builtin-record.c b/tools/perf/builtin-record.c index 4ef78a5e6f3..072aaf0369f 100644 --- a/tools/perf/builtin-record.c +++ b/tools/perf/builtin-record.c @@ -313,6 +313,10 @@ static void pid_synthesize_mmap_samples(pid_t pid) if (*pbf == 'x') { /* vm_exec */ char *execname = strchr(bf, '/'); + /* Catch VDSO */ + if (execname == NULL) + execname = strstr(bf, "[vdso]"); + if (execname == NULL) continue; -- cgit v1.2.3 From ed900c054b541254f0ce5cedaf75206e29bd614e Mon Sep 17 00:00:00 2001 From: Anton Blanchard Date: Thu, 16 Jul 2009 15:44:29 +0200 Subject: perf_counter: Log vfork as a fork event Right now we don't output vfork events. Even though we should always see an exec after a vfork, we may get perfcounter samples between the vfork and exec. These samples can lead to some confusion when parsing perfcounter data. To keep things consistent we should always log a fork event. It will result in a little more log data, but is less confusing to trace parsing tools. Signed-off-by: Anton Blanchard Signed-off-by: Peter Zijlstra LKML-Reference: <20090716104817.589309391@samba.org> Signed-off-by: Ingo Molnar --- kernel/fork.c | 9 +++------ 1 file changed, 3 insertions(+), 6 deletions(-) diff --git a/kernel/fork.c b/kernel/fork.c index 467746b3f0a..4812d60b29f 100644 --- a/kernel/fork.c +++ b/kernel/fork.c @@ -1408,14 +1408,11 @@ long do_fork(unsigned long clone_flags, if (clone_flags & CLONE_VFORK) { p->vfork_done = &vfork; init_completion(&vfork); - } else if (!(clone_flags & CLONE_VM)) { - /* - * vfork will do an exec which will call - * set_task_comm() - */ - perf_counter_fork(p); } + if (!(clone_flags & CLONE_THREAD)) + perf_counter_fork(p); + audit_finish_fork(p); tracehook_report_clone(regs, clone_flags, nr, p); -- cgit v1.2.3 From 4bba828dd9bb950ad1fe340ef148a5436a10f131 Mon Sep 17 00:00:00 2001 From: Anton Blanchard Date: Thu, 16 Jul 2009 15:44:29 +0200 Subject: perf_counter: Add perf record option to log addresses Add the -d or --data option to log event addresses (eg page faults). Signed-off-by: Anton Blanchard Signed-off-by: Peter Zijlstra LKML-Reference: <20090716104817.697698033@samba.org> Signed-off-by: Ingo Molnar --- tools/perf/builtin-record.c | 6 ++++++ 1 file changed, 6 insertions(+) diff --git a/tools/perf/builtin-record.c b/tools/perf/builtin-record.c index 072aaf0369f..68a9be0d151 100644 --- a/tools/perf/builtin-record.c +++ b/tools/perf/builtin-record.c @@ -43,6 +43,7 @@ static int call_graph = 0; static int verbose = 0; static int inherit_stat = 0; static int no_samples = 0; +static int sample_address = 0; static long samples; static struct timeval last_read; @@ -405,6 +406,9 @@ static void create_counter(int counter, int cpu, pid_t pid) if (inherit_stat) attr->inherit_stat = 1; + if (sample_address) + attr->sample_type |= PERF_SAMPLE_ADDR; + if (call_graph) attr->sample_type |= PERF_SAMPLE_CALLCHAIN; @@ -649,6 +653,8 @@ static const struct option options[] = { "be more verbose (show counter open errors, etc)"), OPT_BOOLEAN('s', "stat", &inherit_stat, "per thread counts"), + OPT_BOOLEAN('d', "data", &sample_address, + "Sample addresses"), OPT_BOOLEAN('n', "no-samples", &no_samples, "don't sample"), OPT_END() -- cgit v1.2.3 From 1483b19f8f5e8ad0c8816de368b099322dad4db5 Mon Sep 17 00:00:00 2001 From: Anton Blanchard Date: Thu, 16 Jul 2009 15:44:29 +0200 Subject: perf_counter: Make call graph option consistent perf record uses -g for logging call graph data but perf report uses -c to print call graph data. Be consistent and use -g everywhere for call graph data. Also update the help text to reflect the current default - fractal,0.5 Signed-off-by: Anton Blanchard Acked-by: Frederic Weisbecker Signed-off-by: Peter Zijlstra LKML-Reference: <20090716104817.803604373@samba.org> Signed-off-by: Ingo Molnar --- tools/perf/builtin-report.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/tools/perf/builtin-report.c b/tools/perf/builtin-report.c index 4e5cc266311..4b980cce705 100644 --- a/tools/perf/builtin-report.c +++ b/tools/perf/builtin-report.c @@ -1891,9 +1891,9 @@ static const struct option options[] = { "regex filter to identify parent, see: '--sort parent'"), OPT_BOOLEAN('x', "exclude-other", &exclude_other, "Only display entries with parent-match"), - OPT_CALLBACK_DEFAULT('c', "callchain", NULL, "output_type,min_percent", + OPT_CALLBACK_DEFAULT('g', "call-graph", NULL, "output_type,min_percent", "Display callchains using output_type and min percent threshold. " - "Default: flat,0", &parse_callchain_opt, callchain_default_opt), + "Default: fractal,0.5", &parse_callchain_opt, callchain_default_opt), OPT_STRING('d', "dsos", &dso_list_str, "dso[,dso...]", "only consider symbols in these dsos"), OPT_STRING('C', "comms", &comm_list_str, "comm[,comm...]", -- cgit v1.2.3 From e5d490b252423605a77c54b2e35b10ea663763df Mon Sep 17 00:00:00 2001 From: Mel Gorman Date: Wed, 15 Jul 2009 12:23:11 +0100 Subject: profile: Suppress warning about large allocations when profile=1 is specified When profile= is used, a large buffer is allocated early at boot. This can be larger than what the page allocator can provide so it prints a warning. However, the caller is able to handle the situation so this patch suppresses the warning. Signed-off-by: Mel Gorman Reviewed-by: KOSAKI Motohiro Cc: Linux Memory Management List Cc: Heinz Diehl Cc: David Miller Cc: Arnaldo Carvalho de Melo Cc: Mel Gorman Cc: Andrew Morton LKML-Reference: <1247656992-19846-3-git-send-email-mel@csn.ul.ie> Signed-off-by: Ingo Molnar --- kernel/profile.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) diff --git a/kernel/profile.c b/kernel/profile.c index 69911b5745e..419250ebec4 100644 --- a/kernel/profile.c +++ b/kernel/profile.c @@ -117,11 +117,12 @@ int __ref profile_init(void) cpumask_copy(prof_cpu_mask, cpu_possible_mask); - prof_buffer = kzalloc(buffer_bytes, GFP_KERNEL); + prof_buffer = kzalloc(buffer_bytes, GFP_KERNEL|__GFP_NOWARN); if (prof_buffer) return 0; - prof_buffer = alloc_pages_exact(buffer_bytes, GFP_KERNEL|__GFP_ZERO); + prof_buffer = alloc_pages_exact(buffer_bytes, + GFP_KERNEL|__GFP_ZERO|__GFP_NOWARN); if (prof_buffer) return 0; -- cgit v1.2.3 From 6aa542a694dc9ea4344a8a590d2628c33d1b9431 Mon Sep 17 00:00:00 2001 From: Alexey Fisher Date: Wed, 15 Jul 2009 14:16:09 +0200 Subject: x86: Add quirk for Intel DG45ID board to avoid low memory corruption AMI BIOS with low memory corruption was found on Intel DG45ID board (Bug 13710). Add this board to the blacklist - in the (somewhat optimistic) hope of future boards/BIOSes from Intel not having this bug. Also see: http://bugzilla.kernel.org/show_bug.cgi?id=13736 Signed-off-by: Alexey Fisher Cc: ykzhao Cc: alan@lxorguk.ukuu.org.uk Cc: LKML-Reference: <1247660169-4503-1-git-send-email-bug-track@fisher-privat.net> Signed-off-by: Ingo Molnar --- arch/x86/kernel/setup.c | 13 +++++++++++++ 1 file changed, 13 insertions(+) diff --git a/arch/x86/kernel/setup.c b/arch/x86/kernel/setup.c index de2cab13284..63f32d220ef 100644 --- a/arch/x86/kernel/setup.c +++ b/arch/x86/kernel/setup.c @@ -672,6 +672,19 @@ static struct dmi_system_id __initdata bad_bios_dmi_table[] = { DMI_MATCH(DMI_BIOS_VENDOR, "Phoenix Technologies"), }, }, + { + /* + * AMI BIOS with low memory corruption was found on Intel DG45ID board. + * It hase different DMI_BIOS_VENDOR = "Intel Corp.", for now we will + * match only DMI_BOARD_NAME and see if there is more bad products + * with this vendor. + */ + .callback = dmi_low_memory_corruption, + .ident = "AMI BIOS", + .matches = { + DMI_MATCH(DMI_BOARD_NAME, "DG45ID"), + }, + }, #endif {} }; -- cgit v1.2.3 From 8bcdbe427924a1e4b4e4cf68020e92e9f93fe011 Mon Sep 17 00:00:00 2001 From: Catalin Marinas Date: Tue, 14 Jul 2009 10:52:55 +0100 Subject: x86: Include all of .data.* sections in _edata on 64-bit The .data.read_mostly and .data.cacheline_aligned sections aren't covered by the _sdata .. _edata range on x86-64. This affects kmemleak reporting leading to possible false positives by not scanning the whole data section. Signed-off-by: Catalin Marinas Tested-by: Alexey Fisher Acked-by: Sam Ravnborg Cc: Pekka Enberg LKML-Reference: <1247565175.28240.37.camel@pc1117.cambridge.arm.com> Signed-off-by: Ingo Molnar Cc: Sam Ravnborg --- arch/x86/kernel/vmlinux.lds.S | 7 ------- 1 file changed, 7 deletions(-) diff --git a/arch/x86/kernel/vmlinux.lds.S b/arch/x86/kernel/vmlinux.lds.S index 367e8788204..59f31d2dd43 100644 --- a/arch/x86/kernel/vmlinux.lds.S +++ b/arch/x86/kernel/vmlinux.lds.S @@ -112,11 +112,6 @@ SECTIONS _sdata = .; DATA_DATA CONSTRUCTORS - -#ifdef CONFIG_X86_64 - /* End of data section */ - _edata = .; -#endif } :data #ifdef CONFIG_X86_32 @@ -156,10 +151,8 @@ SECTIONS .data.read_mostly : AT(ADDR(.data.read_mostly) - LOAD_OFFSET) { *(.data.read_mostly) -#ifdef CONFIG_X86_32 /* End of data section */ _edata = .; -#endif } #ifdef CONFIG_X86_64 -- cgit v1.2.3 From a468d389349a7560249b355cdb6d2097ea1616c9 Mon Sep 17 00:00:00 2001 From: Thomas Gleixner Date: Fri, 17 Jul 2009 14:15:46 +0200 Subject: sched: fix load average accounting vs. cpu hotplug The new load average code clears rq->calc_load_active on CPU_ONLINE. That's wrong as the new onlined CPU might have got a scheduler tick already and accounted the delta to the stale value of the time we offlined the CPU. Clear the value when we cleanup the dead CPU instead. Also move the update of the calc_load_update time for the newly online CPU to CPU_UP_PREPARE to avoid that the CPU plays catch up with the stale update time value. Signed-off-by: Thomas Gleixner --- kernel/sched.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/kernel/sched.c b/kernel/sched.c index 98972d366fd..1b59e265273 100644 --- a/kernel/sched.c +++ b/kernel/sched.c @@ -7289,6 +7289,7 @@ static void migrate_dead_tasks(unsigned int dead_cpu) static void calc_global_load_remove(struct rq *rq) { atomic_long_sub(rq->calc_load_active, &calc_load_tasks); + rq->calc_load_active = 0; } #endif /* CONFIG_HOTPLUG_CPU */ @@ -7515,6 +7516,7 @@ migration_call(struct notifier_block *nfb, unsigned long action, void *hcpu) task_rq_unlock(rq, &flags); get_task_struct(p); cpu_rq(cpu)->migration_thread = p; + rq->calc_load_update = calc_load_update; break; case CPU_ONLINE: @@ -7525,8 +7527,6 @@ migration_call(struct notifier_block *nfb, unsigned long action, void *hcpu) /* Update our root-domain */ rq = cpu_rq(cpu); spin_lock_irqsave(&rq->lock, flags); - rq->calc_load_update = calc_load_update; - rq->calc_load_active = 0; if (rq->rd) { BUG_ON(!cpumask_test_cpu(cpu, rq->rd->span)); -- cgit v1.2.3 From 6301cb95c119ebf324bb96ee226fa9ddffad80a7 Mon Sep 17 00:00:00 2001 From: Thomas Gleixner Date: Fri, 17 Jul 2009 14:15:47 +0200 Subject: sched: fix nr_uninterruptible accounting of frozen tasks really commit e3c8ca8336 (sched: do not count frozen tasks toward load) broke the nr_uninterruptible accounting on freeze/thaw. On freeze the task is excluded from accounting with a check for (task->flags & PF_FROZEN), but that flag is cleared before the task is thawed. So while we prevent that the task with state TASK_UNINTERRUPTIBLE is accounted to nr_uninterruptible on freeze we decrement nr_uninterruptible on thaw. Use a separate flag which is handled by the freezing task itself. Set it before calling the scheduler with TASK_UNINTERRUPTIBLE state and clear it after we return from frozen state. Cc: Signed-off-by: Thomas Gleixner --- include/linux/sched.h | 3 ++- kernel/freezer.c | 7 +++++++ 2 files changed, 9 insertions(+), 1 deletion(-) diff --git a/include/linux/sched.h b/include/linux/sched.h index 16a982e389f..3ab08e4bb6b 100644 --- a/include/linux/sched.h +++ b/include/linux/sched.h @@ -209,7 +209,7 @@ extern unsigned long long time_sync_thresh; ((task->state & (__TASK_STOPPED | __TASK_TRACED)) != 0) #define task_contributes_to_load(task) \ ((task->state & TASK_UNINTERRUPTIBLE) != 0 && \ - (task->flags & PF_FROZEN) == 0) + (task->flags & PF_FREEZING) == 0) #define __set_task_state(tsk, state_value) \ do { (tsk)->state = (state_value); } while (0) @@ -1680,6 +1680,7 @@ extern cputime_t task_gtime(struct task_struct *p); #define PF_MEMALLOC 0x00000800 /* Allocating memory */ #define PF_FLUSHER 0x00001000 /* responsible for disk writeback */ #define PF_USED_MATH 0x00002000 /* if unset the fpu must be initialized before use */ +#define PF_FREEZING 0x00004000 /* freeze in progress. do not account to load */ #define PF_NOFREEZE 0x00008000 /* this thread should not be frozen */ #define PF_FROZEN 0x00010000 /* frozen for system suspend */ #define PF_FSTRANS 0x00020000 /* inside a filesystem transaction */ diff --git a/kernel/freezer.c b/kernel/freezer.c index 2f4936cf708..bd1d42b17cb 100644 --- a/kernel/freezer.c +++ b/kernel/freezer.c @@ -44,12 +44,19 @@ void refrigerator(void) recalc_sigpending(); /* We sent fake signal, clean it up */ spin_unlock_irq(¤t->sighand->siglock); + /* prevent accounting of that task to load */ + current->flags |= PF_FREEZING; + for (;;) { set_current_state(TASK_UNINTERRUPTIBLE); if (!frozen(current)) break; schedule(); } + + /* Remove the accounting blocker */ + current->flags &= ~PF_FREEZING; + pr_debug("%s left refrigerator\n", current->comm); __set_current_state(save); } -- cgit v1.2.3 From 64e8be6ebdb8212898781fff7722ff2b0eb76131 Mon Sep 17 00:00:00 2001 From: Russell King Date: Sat, 18 Jul 2009 15:51:55 +0100 Subject: ARM: Realview & Versatile: Fix i2c_board_info definitions Fix i2c_board_info definitions - we were defining the 'type' field of these structures twice since the first argument of I2C_BOARD_INFO sets this field. Move the second definition into I2C_BOARD_INFO(). Signed-off-by: Russell King Acked-by: Jean Delvare Acked-by: Ben Dooks --- arch/arm/mach-realview/core.c | 3 +-- arch/arm/mach-versatile/core.c | 3 +-- 2 files changed, 2 insertions(+), 4 deletions(-) diff --git a/arch/arm/mach-realview/core.c b/arch/arm/mach-realview/core.c index 9ea9c05093c..facbd49eec6 100644 --- a/arch/arm/mach-realview/core.c +++ b/arch/arm/mach-realview/core.c @@ -208,8 +208,7 @@ struct platform_device realview_i2c_device = { static struct i2c_board_info realview_i2c_board_info[] = { { - I2C_BOARD_INFO("rtc-ds1307", 0xd0 >> 1), - .type = "ds1338", + I2C_BOARD_INFO("ds1338", 0xd0 >> 1), }, }; diff --git a/arch/arm/mach-versatile/core.c b/arch/arm/mach-versatile/core.c index 69214fc8bd1..31093af7d05 100644 --- a/arch/arm/mach-versatile/core.c +++ b/arch/arm/mach-versatile/core.c @@ -342,8 +342,7 @@ static struct platform_device versatile_i2c_device = { static struct i2c_board_info versatile_i2c_board_info[] = { { - I2C_BOARD_INFO("rtc-ds1307", 0xd0 >> 1), - .type = "ds1338", + I2C_BOARD_INFO("ds1338", 0xd0 >> 1), }, }; -- cgit v1.2.3 From 4841158b26e28e1476eed84c7347c18f11317750 Mon Sep 17 00:00:00 2001 From: Pavel Roskin Date: Sat, 18 Jul 2009 16:46:02 -0400 Subject: timer: Avoid reading uninitialized data timer->expires may be uninitialized, so check timer_pending() before touching timer->expires to pacify kmemcheck. Signed-off-by: Pavel Roskin LKML-Reference: <20090718204602.5191.360.stgit@mj.roinet.com> Signed-off-by: Thomas Gleixner --- kernel/timer.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/kernel/timer.c b/kernel/timer.c index 0b36b9e5cc8..a7f07d5a624 100644 --- a/kernel/timer.c +++ b/kernel/timer.c @@ -714,7 +714,7 @@ int mod_timer(struct timer_list *timer, unsigned long expires) * networking code - if the timer is re-modified * to be the same thing then just return: */ - if (timer->expires == expires && timer_pending(timer)) + if (timer_pending(timer) && timer->expires == expires) return 1; return __mod_timer(timer, expires, false, TIMER_NOT_PINNED); -- cgit v1.2.3 From 4fbfff76079a5c0e1751b0ddf53160d33f7831e7 Mon Sep 17 00:00:00 2001 From: Rakib Mullick Date: Fri, 17 Jul 2009 20:13:22 +0600 Subject: virtio_blk: mark virtio_blk with __refdata to kill spurious section mismatch The variable virtio_blk references the function virtblk_probe() (which is in .devinit section) and also references the function virtblk_remove() ( which is in .devexit section). So, virtio_blk simultaneously refers .devinit and .devexit section. To avoid this messup, we mark virtio_blk as __refdata. We were warned by the following warning: LD drivers/block/built-in.o WARNING: drivers/block/built-in.o(.data+0xc8dc): Section mismatch in reference from the variable virtio_blk to the function .devinit.text:virtblk_probe() The variable virtio_blk references the function __devinit virtblk_probe() If the reference is valid then annotate the variable with __init* or __refdata (see linux/init.h) or name the variable: *driver, *_template, *_timer, *_sht, *_ops, *_probe, *_probe_one, *_console, WARNING: drivers/block/built-in.o(.data+0xc8e0): Section mismatch in reference from the variable virtio_blk to the function .devexit.text:virtblk_remove() The variable virtio_blk references the function __devexit virtblk_remove() If the reference is valid then annotate the variable with __exit* (see linux/init.h) or name the variable: *driver, *_template, *_timer, *_sht, *_ops, *_probe, *_probe_one, *_console, Signed-off-by: Rakib Mullick Signed-off-by: Tejun Heo --- drivers/block/virtio_blk.c | 7 ++++++- 1 file changed, 6 insertions(+), 1 deletion(-) diff --git a/drivers/block/virtio_blk.c b/drivers/block/virtio_blk.c index 43db3ea15b5..024f2d29258 100644 --- a/drivers/block/virtio_blk.c +++ b/drivers/block/virtio_blk.c @@ -424,7 +424,12 @@ static unsigned int features[] = { VIRTIO_BLK_F_SCSI, VIRTIO_BLK_F_IDENTIFY }; -static struct virtio_driver virtio_blk = { +/* + * virtio_blk causes spurious section mismatch warning by + * simultaneously referring to a __devinit and a __devexit function. + * Use __refdata to avoid this warning. + */ +static struct virtio_driver __refdata virtio_blk = { .feature_table = features, .feature_table_size = ARRAY_SIZE(features), .driver.name = KBUILD_MODNAME, -- cgit v1.2.3 From 2e9bf247066a293ebcd4672ddd487808ab5f2d1b Mon Sep 17 00:00:00 2001 From: Jaroslav Kysela Date: Sat, 18 Jul 2009 11:48:19 +0200 Subject: ALSA: hda_codec: Check for invalid zero connections To prevent "Too many connections" message and the error path for some HDMI codecs (which makes onboard audio unusable), check for invalid zero connections for CONNECT_LIST verb. Signed-off-by: Jaroslav Kysela Signed-off-by: Takashi Iwai --- sound/pci/hda/hda_codec.c | 6 ++++++ 1 file changed, 6 insertions(+) diff --git a/sound/pci/hda/hda_codec.c b/sound/pci/hda/hda_codec.c index 26d255de6be..88480c0c58a 100644 --- a/sound/pci/hda/hda_codec.c +++ b/sound/pci/hda/hda_codec.c @@ -332,6 +332,12 @@ int snd_hda_get_connections(struct hda_codec *codec, hda_nid_t nid, AC_VERB_GET_CONNECT_LIST, i); range_val = !!(parm & (1 << (shift-1))); /* ranges */ val = parm & mask; + if (val == 0) { + snd_printk(KERN_WARNING "hda_codec: " + "invalid CONNECT_LIST verb %x[%i]:%x\n", + nid, i, parm); + return 0; + } parm >>= shift; if (range_val) { /* ranges between the previous and this one */ -- cgit v1.2.3 From fcb2954b9621dfeaca92f6a11dac69cfdfaa6705 Mon Sep 17 00:00:00 2001 From: Julia Lawall Date: Sat, 18 Jul 2009 17:26:14 +0200 Subject: ALSA: sound/isa: convert nested spin_lock_irqsave to spin_lock If spin_lock_irqsave is called twice in a row with the same second argument, the interrupt state at the point of the second call overwrites the value saved by the first call. Indeed, the second call does not need to save the interrupt state, so it is changed to a simple spin_lock. The semantic match that finds this problem is as follows: (http://www.emn.fr/x-info/coccinelle/) // @@ expression lock1,lock2; expression flags; @@ *spin_lock_irqsave(lock1,flags) ... when != flags *spin_lock_irqsave(lock2,flags) // Signed-off-by: Julia Lawall Signed-off-by: Takashi Iwai --- sound/isa/gus/gus_pcm.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/sound/isa/gus/gus_pcm.c b/sound/isa/gus/gus_pcm.c index edb11eefdfe..2dcf45bf729 100644 --- a/sound/isa/gus/gus_pcm.c +++ b/sound/isa/gus/gus_pcm.c @@ -795,13 +795,13 @@ static int snd_gf1_pcm_volume_put(struct snd_kcontrol *kcontrol, struct snd_ctl_ if (!(pcmp->flags & SNDRV_GF1_PCM_PFLG_ACTIVE)) continue; /* load real volume - better precision */ - spin_lock_irqsave(&gus->reg_lock, flags); + spin_lock(&gus->reg_lock); snd_gf1_select_voice(gus, pvoice->number); snd_gf1_ctrl_stop(gus, SNDRV_GF1_VB_VOLUME_CONTROL); vol = pvoice == pcmp->pvoices[0] ? gus->gf1.pcm_volume_level_left : gus->gf1.pcm_volume_level_right; snd_gf1_write16(gus, SNDRV_GF1_VW_VOLUME, vol); pcmp->final_volume = 1; - spin_unlock_irqrestore(&gus->reg_lock, flags); + spin_unlock(&gus->reg_lock); } spin_unlock_irqrestore(&gus->voice_alloc, flags); return change; -- cgit v1.2.3 From 79ef2bb01445400def20c7993b27fbcad27ca95f Mon Sep 17 00:00:00 2001 From: Thomas Gleixner Date: Sun, 19 Jul 2009 17:09:12 +0200 Subject: clocksource: Prevent NULL pointer dereference Writing a zero length string to sys/.../current_clocksource will cause a NULL pointer dereference if the clock events system is in one shot (highres or nohz) mode. Pointed-out-by: Dan Carpenter LKML-Reference: Signed-off-by: Thomas Gleixner --- kernel/time/clocksource.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/kernel/time/clocksource.c b/kernel/time/clocksource.c index 592bf584d1d..7466cb81125 100644 --- a/kernel/time/clocksource.c +++ b/kernel/time/clocksource.c @@ -513,7 +513,7 @@ static ssize_t sysfs_override_clocksource(struct sys_device *dev, * Check to make sure we don't switch to a non-highres capable * clocksource if the tick code is in oneshot mode (highres or nohz) */ - if (tick_oneshot_mode_active() && + if (tick_oneshot_mode_active() && ovr && !(ovr->flags & CLOCK_SOURCE_VALID_FOR_HRES)) { printk(KERN_WARNING "%s clocksource is not HRT compatible. " "Cannot switch while in HRT/NOHZ mode\n", ovr->name); -- cgit v1.2.3 From f96e0808212ca284cc9398d7cd3f573786c1d890 Mon Sep 17 00:00:00 2001 From: Jaswinder Singh Rajput Date: Sun, 19 Jul 2009 21:58:34 +0530 Subject: ALSA: OSS sequencer should be initialized after snd_seq_system_client_init When build SND_SEQUENCER in kernel then OSS sequencer(alsa_seq_oss_init) is initialized before System (snd_seq_system_client_init) which leads to memory leak : unreferenced object 0xf6b0e680 (size 256): comm "swapper", pid 1, jiffies 4294670753 backtrace: [] create_object+0x135/0x204 [] kmemleak_alloc+0x26/0x4c [] kmem_cache_alloc+0x72/0xff [] seq_create_client1+0x22/0x160 [] snd_seq_create_kernel_client+0x72/0xef [] snd_seq_oss_create_client+0x86/0x142 [] alsa_seq_oss_init+0xf6/0x155 [] do_one_initcall+0x4f/0x111 [] kernel_init+0x115/0x166 [] kernel_thread_helper+0x7/0x10 [] 0xffffffff unreferenced object 0xf688a580 (size 64): comm "swapper", pid 1, jiffies 4294670753 backtrace: [] create_object+0x135/0x204 [] kmemleak_alloc+0x26/0x4c [] kmem_cache_alloc+0x72/0xff [] snd_seq_pool_new+0x1c/0xb8 [] seq_create_client1+0x87/0x160 [] snd_seq_create_kernel_client+0x72/0xef [] snd_seq_oss_create_client+0x86/0x142 [] alsa_seq_oss_init+0xf6/0x155 [] do_one_initcall+0x4f/0x111 [] kernel_init+0x115/0x166 [] kernel_thread_helper+0x7/0x10 [] 0xffffffff unreferenced object 0xf6b0e480 (size 256): comm "swapper", pid 1, jiffies 4294670754 backtrace: [] create_object+0x135/0x204 [] kmemleak_alloc+0x26/0x4c [] kmem_cache_alloc+0x72/0xff [] snd_seq_create_port+0x51/0x21c [] snd_seq_ioctl_create_port+0x57/0x13c [] snd_seq_do_ioctl+0x4a/0x69 [] snd_seq_kernel_client_ctl+0x33/0x49 [] snd_seq_oss_create_client+0xf5/0x142 [] alsa_seq_oss_init+0xf6/0x155 [] do_one_initcall+0x4f/0x111 [] kernel_init+0x115/0x166 [] kernel_thread_helper+0x7/0x10 [] 0xffffffff The correct order should be : System (snd_seq_system_client_init) should be initialized before OSS sequencer(alsa_seq_oss_init) which is equivalent to : 1. insmod sound/core/seq/snd-seq-device.ko 2. insmod sound/core/seq/snd-seq.ko 3. insmod sound/core/seq/snd-seq-midi-event.ko 4. insmod sound/core/seq/oss/snd-seq-oss.ko Including sound/core/seq/oss/Makefile after other seq modules fixes the ordering and memory leak. Signed-off-by: Jaswinder Singh Rajput Signed-off-by: Takashi Iwai --- sound/core/seq/Makefile | 7 ++----- 1 file changed, 2 insertions(+), 5 deletions(-) diff --git a/sound/core/seq/Makefile b/sound/core/seq/Makefile index 1bcb360330e..941f64a853e 100644 --- a/sound/core/seq/Makefile +++ b/sound/core/seq/Makefile @@ -3,10 +3,6 @@ # Copyright (c) 1999 by Jaroslav Kysela # -ifeq ($(CONFIG_SND_SEQUENCER_OSS),y) - obj-$(CONFIG_SND_SEQUENCER) += oss/ -endif - snd-seq-device-objs := seq_device.o snd-seq-objs := seq.o seq_lock.o seq_clientmgr.o seq_memory.o seq_queue.o \ seq_fifo.o seq_prioq.o seq_timer.o \ @@ -19,7 +15,8 @@ snd-seq-virmidi-objs := seq_virmidi.o obj-$(CONFIG_SND_SEQUENCER) += snd-seq.o snd-seq-device.o ifeq ($(CONFIG_SND_SEQUENCER_OSS),y) -obj-$(CONFIG_SND_SEQUENCER) += snd-seq-midi-event.o + obj-$(CONFIG_SND_SEQUENCER) += snd-seq-midi-event.o + obj-$(CONFIG_SND_SEQUENCER) += oss/ endif obj-$(CONFIG_SND_SEQ_DUMMY) += snd-seq-dummy.o -- cgit v1.2.3 From 76c317d6e5cb7f58541879006d39774596962715 Mon Sep 17 00:00:00 2001 From: Julia Lawall Date: Sun, 19 Jul 2009 17:26:13 +0200 Subject: HID: Move dereferences below a NULL test If the NULL test is necessary, then the dereferences should be moved below the NULL test. The semantic patch that makes this change is as follows: (http://www.emn.fr/x-info/coccinelle/) // @@ type T; expression E,E1; identifier i,fld; statement S; @@ - T i = E->fld; + T i; ... when != E=E1 when != i if (E == NULL||...) S + i = E->fld; // Signed-off-by: Julia Lawall Signed-off-by: Jiri Kosina --- drivers/hid/hid-core.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) diff --git a/drivers/hid/hid-core.c b/drivers/hid/hid-core.c index f2c21d5d24e..5eb10c2ce66 100644 --- a/drivers/hid/hid-core.c +++ b/drivers/hid/hid-core.c @@ -1075,14 +1075,16 @@ EXPORT_SYMBOL_GPL(hid_report_raw_event); */ int hid_input_report(struct hid_device *hid, int type, u8 *data, int size, int interrupt) { - struct hid_report_enum *report_enum = hid->report_enum + type; - struct hid_driver *hdrv = hid->driver; + struct hid_report_enum *report_enum; + struct hid_driver *hdrv; struct hid_report *report; unsigned int i; int ret; if (!hid || !hid->driver) return -ENODEV; + report_enum = hid->report_enum + type; + hdrv = hid->driver; if (!size) { dbg_hid("empty report\n"); -- cgit v1.2.3 From 42b95f0c6b524b5a670dd17533a3522db368f600 Mon Sep 17 00:00:00 2001 From: Hao Song Date: Mon, 20 Jul 2009 15:01:16 +0800 Subject: ALSA: hda - Add quirk for Gateway T6834c laptop Gateway T6834c laptops need EAPD always on while the default behavior for the STAC9205 reference board is to turn it off upon every HP plug. By using the special "eapd" model, which is first introduced for Gateway T1616 laptops for this same reason, this peculiarity can be properly handled. Signed-off-by: Hao Song Cc: Signed-off-by: Takashi Iwai --- sound/pci/hda/patch_sigmatel.c | 1 + 1 file changed, 1 insertion(+) diff --git a/sound/pci/hda/patch_sigmatel.c b/sound/pci/hda/patch_sigmatel.c index 41b5b3a18c1..d9b89ba2b65 100644 --- a/sound/pci/hda/patch_sigmatel.c +++ b/sound/pci/hda/patch_sigmatel.c @@ -2378,6 +2378,7 @@ static struct snd_pci_quirk stac9205_cfg_tbl[] = { SND_PCI_QUIRK(PCI_VENDOR_ID_DELL, 0x0228, "Dell Vostro 1500", STAC_9205_DELL_M42), /* Gateway */ + SND_PCI_QUIRK(0x107b, 0x0560, "Gateway T6834c", STAC_9205_EAPD), SND_PCI_QUIRK(0x107b, 0x0565, "Gateway T1616", STAC_9205_EAPD), {} /* terminator */ }; -- cgit v1.2.3 From b04add956616b6d89ff21da749b46ad2bd58ef32 Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Mon, 20 Jul 2009 08:01:36 +0200 Subject: ALSA: hda - Fix pin-setup for Sony VAIO with STAC9872 codecs The recent rewrite of the codec parser for STAC9872 caused a regression for some Sony VAIO models that don't give proper pin default configs by BIOS. Even using model=vaio doesn't work because the pin definitions are set after the pin overrides. This patch fixes the pin definitions in patch_stac9872() to be put in the right place before the pin overrides. Also the patch adds the new quirk entry for VAIO F/S to have the correct pin default configs. Signed-off-by: Takashi Iwai Cc: --- sound/pci/hda/patch_sigmatel.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) diff --git a/sound/pci/hda/patch_sigmatel.c b/sound/pci/hda/patch_sigmatel.c index d9b89ba2b65..da7f9f65c04 100644 --- a/sound/pci/hda/patch_sigmatel.c +++ b/sound/pci/hda/patch_sigmatel.c @@ -5855,6 +5855,8 @@ static unsigned int *stac9872_brd_tbl[STAC_9872_MODELS] = { }; static struct snd_pci_quirk stac9872_cfg_tbl[] = { + SND_PCI_QUIRK_MASK(0x104d, 0xfff0, 0x81e0, + "Sony VAIO F/S", STAC_9872_VAIO), {} /* terminator */ }; @@ -5867,6 +5869,8 @@ static int patch_stac9872(struct hda_codec *codec) if (spec == NULL) return -ENOMEM; codec->spec = spec; + spec->num_pins = ARRAY_SIZE(stac9872_pin_nids); + spec->pin_nids = stac9872_pin_nids; spec->board_config = snd_hda_check_board_config(codec, STAC_9872_MODELS, stac9872_models, @@ -5878,8 +5882,6 @@ static int patch_stac9872(struct hda_codec *codec) stac92xx_set_config_regs(codec, stac9872_brd_tbl[spec->board_config]); - spec->num_pins = ARRAY_SIZE(stac9872_pin_nids); - spec->pin_nids = stac9872_pin_nids; spec->multiout.dac_nids = spec->dac_nids; spec->num_adcs = ARRAY_SIZE(stac9872_adc_nids); spec->adc_nids = stac9872_adc_nids; -- cgit v1.2.3 From 34fdeb2d07102e07ecafe79dec170bd6733f2e56 Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Mon, 20 Jul 2009 15:42:51 +0200 Subject: ALSA: ca0106 - Fix the max capture buffer size The capture buffer size with 64kB seems broken with CA0106. At least, either the update timing or the DMA position is wrong, and this screws up pulseaudio badly. This patch restricts the max buffer size less than that to make life a bit easier. Signed-off-by: Takashi Iwai Cc: --- sound/pci/ca0106/ca0106_main.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/sound/pci/ca0106/ca0106_main.c b/sound/pci/ca0106/ca0106_main.c index 57b992a5c05..700f15ea16d 100644 --- a/sound/pci/ca0106/ca0106_main.c +++ b/sound/pci/ca0106/ca0106_main.c @@ -325,9 +325,9 @@ static struct snd_pcm_hardware snd_ca0106_capture_hw = { .rate_max = 192000, .channels_min = 2, .channels_max = 2, - .buffer_bytes_max = ((65536 - 64) * 8), + .buffer_bytes_max = 65536 - 128, .period_bytes_min = 64, - .period_bytes_max = (65536 - 64), + .period_bytes_max = 32768 - 64, .periods_min = 2, .periods_max = 2, .fifo_size = 0, -- cgit v1.2.3 From a50a97d415d839e6db9df288ff0205528e52c03e Mon Sep 17 00:00:00 2001 From: Wan ZongShun Date: Thu, 16 Jul 2009 02:55:05 +0000 Subject: Add mac driver for w90p910 Add mac driver support for evaluation board based on w90p910. Signed-off-by: Wan ZongShun Signed-off-by: David S. Miller --- drivers/net/arm/Kconfig | 8 + drivers/net/arm/Makefile | 1 + drivers/net/arm/w90p910_ether.c | 1105 +++++++++++++++++++++++++++++++++++++++ 3 files changed, 1114 insertions(+) create mode 100644 drivers/net/arm/w90p910_ether.c diff --git a/drivers/net/arm/Kconfig b/drivers/net/arm/Kconfig index 2895db13bfa..c37ee9e6b67 100644 --- a/drivers/net/arm/Kconfig +++ b/drivers/net/arm/Kconfig @@ -63,3 +63,11 @@ config IXP4XX_ETH help Say Y here if you want to use built-in Ethernet ports on IXP4xx processor. + +config W90P910_ETH + tristate "Nuvoton w90p910 Ethernet support" + depends on ARM && ARCH_W90X900 + select PHYLIB + help + Say Y here if you want to use built-in Ethernet ports + on w90p910 processor. diff --git a/drivers/net/arm/Makefile b/drivers/net/arm/Makefile index 811a3ccd14c..303171f589e 100644 --- a/drivers/net/arm/Makefile +++ b/drivers/net/arm/Makefile @@ -11,3 +11,4 @@ obj-$(CONFIG_ARM_AT91_ETHER) += at91_ether.o obj-$(CONFIG_ARM_KS8695_ETHER) += ks8695net.o obj-$(CONFIG_EP93XX_ETH) += ep93xx_eth.o obj-$(CONFIG_IXP4XX_ETH) += ixp4xx_eth.o +obj-$(CONFIG_W90P910_ETH) += w90p910_ether.o diff --git a/drivers/net/arm/w90p910_ether.c b/drivers/net/arm/w90p910_ether.c new file mode 100644 index 00000000000..616fb7985a3 --- /dev/null +++ b/drivers/net/arm/w90p910_ether.c @@ -0,0 +1,1105 @@ +/* + * Copyright (c) 2008-2009 Nuvoton technology corporation. + * + * Wan ZongShun + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation;version 2 of the License. + * + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#define DRV_MODULE_NAME "w90p910-emc" +#define DRV_MODULE_VERSION "0.1" + +/* Ethernet MAC Registers */ +#define REG_CAMCMR 0x00 +#define REG_CAMEN 0x04 +#define REG_CAMM_BASE 0x08 +#define REG_CAML_BASE 0x0c +#define REG_TXDLSA 0x88 +#define REG_RXDLSA 0x8C +#define REG_MCMDR 0x90 +#define REG_MIID 0x94 +#define REG_MIIDA 0x98 +#define REG_FFTCR 0x9C +#define REG_TSDR 0xa0 +#define REG_RSDR 0xa4 +#define REG_DMARFC 0xa8 +#define REG_MIEN 0xac +#define REG_MISTA 0xb0 +#define REG_CTXDSA 0xcc +#define REG_CTXBSA 0xd0 +#define REG_CRXDSA 0xd4 +#define REG_CRXBSA 0xd8 + +/* mac controller bit */ +#define MCMDR_RXON 0x01 +#define MCMDR_ACP (0x01 << 3) +#define MCMDR_SPCRC (0x01 << 5) +#define MCMDR_TXON (0x01 << 8) +#define MCMDR_FDUP (0x01 << 18) +#define MCMDR_ENMDC (0x01 << 19) +#define MCMDR_OPMOD (0x01 << 20) +#define SWR (0x01 << 24) + +/* cam command regiser */ +#define CAMCMR_AUP 0x01 +#define CAMCMR_AMP (0x01 << 1) +#define CAMCMR_ABP (0x01 << 2) +#define CAMCMR_CCAM (0x01 << 3) +#define CAMCMR_ECMP (0x01 << 4) +#define CAM0EN 0x01 + +/* mac mii controller bit */ +#define MDCCR (0x0a << 20) +#define PHYAD (0x01 << 8) +#define PHYWR (0x01 << 16) +#define PHYBUSY (0x01 << 17) +#define PHYPRESP (0x01 << 18) +#define CAM_ENTRY_SIZE 0x08 + +/* rx and tx status */ +#define TXDS_TXCP (0x01 << 19) +#define RXDS_CRCE (0x01 << 17) +#define RXDS_PTLE (0x01 << 19) +#define RXDS_RXGD (0x01 << 20) +#define RXDS_ALIE (0x01 << 21) +#define RXDS_RP (0x01 << 22) + +/* mac interrupt status*/ +#define MISTA_EXDEF (0x01 << 19) +#define MISTA_TXBERR (0x01 << 24) +#define MISTA_TDU (0x01 << 23) +#define MISTA_RDU (0x01 << 10) +#define MISTA_RXBERR (0x01 << 11) + +#define ENSTART 0x01 +#define ENRXINTR 0x01 +#define ENRXGD (0x01 << 4) +#define ENRXBERR (0x01 << 11) +#define ENTXINTR (0x01 << 16) +#define ENTXCP (0x01 << 18) +#define ENTXABT (0x01 << 21) +#define ENTXBERR (0x01 << 24) +#define ENMDC (0x01 << 19) +#define PHYBUSY (0x01 << 17) +#define MDCCR_VAL 0xa00000 + +/* rx and tx owner bit */ +#define RX_OWEN_DMA (0x01 << 31) +#define RX_OWEN_CPU (~(0x03 << 30)) +#define TX_OWEN_DMA (0x01 << 31) +#define TX_OWEN_CPU (~(0x01 << 31)) + +/* tx frame desc controller bit */ +#define MACTXINTEN 0x04 +#define CRCMODE 0x02 +#define PADDINGMODE 0x01 + +/* fftcr controller bit */ +#define TXTHD (0x03 << 8) +#define BLENGTH (0x01 << 20) + +/* global setting for driver */ +#define RX_DESC_SIZE 50 +#define TX_DESC_SIZE 10 +#define MAX_RBUFF_SZ 0x600 +#define MAX_TBUFF_SZ 0x600 +#define TX_TIMEOUT 50 +#define DELAY 1000 +#define CAM0 0x0 + +static int w90p910_mdio_read(struct net_device *dev, int phy_id, int reg); + +struct w90p910_rxbd { + unsigned int sl; + unsigned int buffer; + unsigned int reserved; + unsigned int next; +}; + +struct w90p910_txbd { + unsigned int mode; + unsigned int buffer; + unsigned int sl; + unsigned int next; +}; + +struct recv_pdesc { + struct w90p910_rxbd desclist[RX_DESC_SIZE]; + char recv_buf[RX_DESC_SIZE][MAX_RBUFF_SZ]; +}; + +struct tran_pdesc { + struct w90p910_txbd desclist[TX_DESC_SIZE]; + char tran_buf[RX_DESC_SIZE][MAX_TBUFF_SZ]; +}; + +struct w90p910_ether { + struct recv_pdesc *rdesc; + struct recv_pdesc *rdesc_phys; + struct tran_pdesc *tdesc; + struct tran_pdesc *tdesc_phys; + struct net_device_stats stats; + struct platform_device *pdev; + struct sk_buff *skb; + struct clk *clk; + struct clk *rmiiclk; + struct mii_if_info mii; + struct timer_list check_timer; + void __iomem *reg; + unsigned int rxirq; + unsigned int txirq; + unsigned int cur_tx; + unsigned int cur_rx; + unsigned int finish_tx; + unsigned int rx_packets; + unsigned int rx_bytes; + unsigned int start_tx_ptr; + unsigned int start_rx_ptr; + unsigned int linkflag; + spinlock_t lock; +}; + +static void update_linkspeed_register(struct net_device *dev, + unsigned int speed, unsigned int duplex) +{ + struct w90p910_ether *ether = netdev_priv(dev); + unsigned int val; + + val = __raw_readl(ether->reg + REG_MCMDR); + + if (speed == SPEED_100) { + /* 100 full/half duplex */ + if (duplex == DUPLEX_FULL) { + val |= (MCMDR_OPMOD | MCMDR_FDUP); + } else { + val |= MCMDR_OPMOD; + val &= ~MCMDR_FDUP; + } + } else { + /* 10 full/half duplex */ + if (duplex == DUPLEX_FULL) { + val |= MCMDR_FDUP; + val &= ~MCMDR_OPMOD; + } else { + val &= ~(MCMDR_FDUP | MCMDR_OPMOD); + } + } + + __raw_writel(val, ether->reg + REG_MCMDR); +} + +static void update_linkspeed(struct net_device *dev) +{ + struct w90p910_ether *ether = netdev_priv(dev); + struct platform_device *pdev; + unsigned int bmsr, bmcr, lpa, speed, duplex; + + pdev = ether->pdev; + + if (!mii_link_ok(ðer->mii)) { + ether->linkflag = 0x0; + netif_carrier_off(dev); + dev_warn(&pdev->dev, "%s: Link down.\n", dev->name); + return; + } + + if (ether->linkflag == 1) + return; + + bmsr = w90p910_mdio_read(dev, ether->mii.phy_id, MII_BMSR); + bmcr = w90p910_mdio_read(dev, ether->mii.phy_id, MII_BMCR); + + if (bmcr & BMCR_ANENABLE) { + if (!(bmsr & BMSR_ANEGCOMPLETE)) + return; + + lpa = w90p910_mdio_read(dev, ether->mii.phy_id, MII_LPA); + + if ((lpa & LPA_100FULL) || (lpa & LPA_100HALF)) + speed = SPEED_100; + else + speed = SPEED_10; + + if ((lpa & LPA_100FULL) || (lpa & LPA_10FULL)) + duplex = DUPLEX_FULL; + else + duplex = DUPLEX_HALF; + + } else { + speed = (bmcr & BMCR_SPEED100) ? SPEED_100 : SPEED_10; + duplex = (bmcr & BMCR_FULLDPLX) ? DUPLEX_FULL : DUPLEX_HALF; + } + + update_linkspeed_register(dev, speed, duplex); + + dev_info(&pdev->dev, "%s: Link now %i-%s\n", dev->name, speed, + (duplex == DUPLEX_FULL) ? "FullDuplex" : "HalfDuplex"); + ether->linkflag = 0x01; + + netif_carrier_on(dev); +} + +static void w90p910_check_link(unsigned long dev_id) +{ + struct net_device *dev = (struct net_device *) dev_id; + struct w90p910_ether *ether = netdev_priv(dev); + + update_linkspeed(dev); + mod_timer(ðer->check_timer, jiffies + msecs_to_jiffies(1000)); +} + +static void w90p910_write_cam(struct net_device *dev, + unsigned int x, unsigned char *pval) +{ + struct w90p910_ether *ether = netdev_priv(dev); + unsigned int msw, lsw; + + msw = (pval[0] << 24) | (pval[1] << 16) | (pval[2] << 8) | pval[3]; + + lsw = (pval[4] << 24) | (pval[5] << 16); + + __raw_writel(lsw, ether->reg + REG_CAML_BASE + x * CAM_ENTRY_SIZE); + __raw_writel(msw, ether->reg + REG_CAMM_BASE + x * CAM_ENTRY_SIZE); +} + +static void w90p910_init_desc(struct net_device *dev) +{ + struct w90p910_ether *ether; + struct w90p910_txbd *tdesc, *tdesc_phys; + struct w90p910_rxbd *rdesc, *rdesc_phys; + unsigned int i, j; + + ether = netdev_priv(dev); + + ether->tdesc = (struct tran_pdesc *) + dma_alloc_coherent(NULL, sizeof(struct tran_pdesc), + (dma_addr_t *) ðer->tdesc_phys, GFP_KERNEL); + + ether->rdesc = (struct recv_pdesc *) + dma_alloc_coherent(NULL, sizeof(struct recv_pdesc), + (dma_addr_t *) ðer->rdesc_phys, GFP_KERNEL); + + for (i = 0; i < TX_DESC_SIZE; i++) { + tdesc = &(ether->tdesc->desclist[i]); + + j = ((i + 1) / TX_DESC_SIZE); + + if (j != 0) { + tdesc_phys = &(ether->tdesc_phys->desclist[0]); + ether->start_tx_ptr = (unsigned int)tdesc_phys; + tdesc->next = (unsigned int)ether->start_tx_ptr; + } else { + tdesc_phys = &(ether->tdesc_phys->desclist[i+1]); + tdesc->next = (unsigned int)tdesc_phys; + } + + tdesc->buffer = (unsigned int)ether->tdesc_phys->tran_buf[i]; + tdesc->sl = 0; + tdesc->mode = 0; + } + + for (i = 0; i < RX_DESC_SIZE; i++) { + rdesc = &(ether->rdesc->desclist[i]); + + j = ((i + 1) / RX_DESC_SIZE); + + if (j != 0) { + rdesc_phys = &(ether->rdesc_phys->desclist[0]); + ether->start_rx_ptr = (unsigned int)rdesc_phys; + rdesc->next = (unsigned int)ether->start_rx_ptr; + } else { + rdesc_phys = &(ether->rdesc_phys->desclist[i+1]); + rdesc->next = (unsigned int)rdesc_phys; + } + + rdesc->sl = RX_OWEN_DMA; + rdesc->buffer = (unsigned int)ether->rdesc_phys->recv_buf[i]; + } +} + +static void w90p910_set_fifo_threshold(struct net_device *dev) +{ + struct w90p910_ether *ether = netdev_priv(dev); + unsigned int val; + + val = TXTHD | BLENGTH; + __raw_writel(val, ether->reg + REG_FFTCR); +} + +static void w90p910_return_default_idle(struct net_device *dev) +{ + struct w90p910_ether *ether = netdev_priv(dev); + unsigned int val; + + val = __raw_readl(ether->reg + REG_MCMDR); + val |= SWR; + __raw_writel(val, ether->reg + REG_MCMDR); +} + +static void w90p910_trigger_rx(struct net_device *dev) +{ + struct w90p910_ether *ether = netdev_priv(dev); + + __raw_writel(ENSTART, ether->reg + REG_RSDR); +} + +static void w90p910_trigger_tx(struct net_device *dev) +{ + struct w90p910_ether *ether = netdev_priv(dev); + + __raw_writel(ENSTART, ether->reg + REG_TSDR); +} + +static void w90p910_enable_mac_interrupt(struct net_device *dev) +{ + struct w90p910_ether *ether = netdev_priv(dev); + unsigned int val; + + val = ENTXINTR | ENRXINTR | ENRXGD | ENTXCP; + val |= ENTXBERR | ENRXBERR | ENTXABT; + + __raw_writel(val, ether->reg + REG_MIEN); +} + +static void w90p910_get_and_clear_int(struct net_device *dev, + unsigned int *val) +{ + struct w90p910_ether *ether = netdev_priv(dev); + + *val = __raw_readl(ether->reg + REG_MISTA); + __raw_writel(*val, ether->reg + REG_MISTA); +} + +static void w90p910_set_global_maccmd(struct net_device *dev) +{ + struct w90p910_ether *ether = netdev_priv(dev); + unsigned int val; + + val = __raw_readl(ether->reg + REG_MCMDR); + val |= MCMDR_SPCRC | MCMDR_ENMDC | MCMDR_ACP | ENMDC; + __raw_writel(val, ether->reg + REG_MCMDR); +} + +static void w90p910_enable_cam(struct net_device *dev) +{ + struct w90p910_ether *ether = netdev_priv(dev); + unsigned int val; + + w90p910_write_cam(dev, CAM0, dev->dev_addr); + + val = __raw_readl(ether->reg + REG_CAMEN); + val |= CAM0EN; + __raw_writel(val, ether->reg + REG_CAMEN); +} + +static void w90p910_enable_cam_command(struct net_device *dev) +{ + struct w90p910_ether *ether = netdev_priv(dev); + unsigned int val; + + val = CAMCMR_ECMP | CAMCMR_ABP | CAMCMR_AMP; + __raw_writel(val, ether->reg + REG_CAMCMR); +} + +static void w90p910_enable_tx(struct net_device *dev, unsigned int enable) +{ + struct w90p910_ether *ether = netdev_priv(dev); + unsigned int val; + + val = __raw_readl(ether->reg + REG_MCMDR); + + if (enable) + val |= MCMDR_TXON; + else + val &= ~MCMDR_TXON; + + __raw_writel(val, ether->reg + REG_MCMDR); +} + +static void w90p910_enable_rx(struct net_device *dev, unsigned int enable) +{ + struct w90p910_ether *ether = netdev_priv(dev); + unsigned int val; + + val = __raw_readl(ether->reg + REG_MCMDR); + + if (enable) + val |= MCMDR_RXON; + else + val &= ~MCMDR_RXON; + + __raw_writel(val, ether->reg + REG_MCMDR); +} + +static void w90p910_set_curdest(struct net_device *dev) +{ + struct w90p910_ether *ether = netdev_priv(dev); + + __raw_writel(ether->start_rx_ptr, ether->reg + REG_RXDLSA); + __raw_writel(ether->start_tx_ptr, ether->reg + REG_TXDLSA); +} + +static void w90p910_reset_mac(struct net_device *dev) +{ + struct w90p910_ether *ether = netdev_priv(dev); + + spin_lock(ðer->lock); + + w90p910_enable_tx(dev, 0); + w90p910_enable_rx(dev, 0); + w90p910_set_fifo_threshold(dev); + w90p910_return_default_idle(dev); + + if (!netif_queue_stopped(dev)) + netif_stop_queue(dev); + + w90p910_init_desc(dev); + + dev->trans_start = jiffies; + ether->cur_tx = 0x0; + ether->finish_tx = 0x0; + ether->cur_rx = 0x0; + + w90p910_set_curdest(dev); + w90p910_enable_cam(dev); + w90p910_enable_cam_command(dev); + w90p910_enable_mac_interrupt(dev); + w90p910_enable_tx(dev, 1); + w90p910_enable_rx(dev, 1); + w90p910_trigger_tx(dev); + w90p910_trigger_rx(dev); + + dev->trans_start = jiffies; + + if (netif_queue_stopped(dev)) + netif_wake_queue(dev); + + spin_unlock(ðer->lock); +} + +static void w90p910_mdio_write(struct net_device *dev, + int phy_id, int reg, int data) +{ + struct w90p910_ether *ether = netdev_priv(dev); + struct platform_device *pdev; + unsigned int val, i; + + pdev = ether->pdev; + + __raw_writel(data, ether->reg + REG_MIID); + + val = (phy_id << 0x08) | reg; + val |= PHYBUSY | PHYWR | MDCCR_VAL; + __raw_writel(val, ether->reg + REG_MIIDA); + + for (i = 0; i < DELAY; i++) { + if ((__raw_readl(ether->reg + REG_MIIDA) & PHYBUSY) == 0) + break; + } + + if (i == DELAY) + dev_warn(&pdev->dev, "mdio write timed out\n"); +} + +static int w90p910_mdio_read(struct net_device *dev, int phy_id, int reg) +{ + struct w90p910_ether *ether = netdev_priv(dev); + struct platform_device *pdev; + unsigned int val, i, data; + + pdev = ether->pdev; + + val = (phy_id << 0x08) | reg; + val |= PHYBUSY | MDCCR_VAL; + __raw_writel(val, ether->reg + REG_MIIDA); + + for (i = 0; i < DELAY; i++) { + if ((__raw_readl(ether->reg + REG_MIIDA) & PHYBUSY) == 0) + break; + } + + if (i == DELAY) { + dev_warn(&pdev->dev, "mdio read timed out\n"); + data = 0xffff; + } else { + data = __raw_readl(ether->reg + REG_MIID); + } + + return data; +} + +static int set_mac_address(struct net_device *dev, void *addr) +{ + struct sockaddr *address = addr; + + if (!is_valid_ether_addr(address->sa_data)) + return -EADDRNOTAVAIL; + + memcpy(dev->dev_addr, address->sa_data, dev->addr_len); + w90p910_write_cam(dev, CAM0, dev->dev_addr); + + return 0; +} + +static int w90p910_ether_close(struct net_device *dev) +{ + struct w90p910_ether *ether = netdev_priv(dev); + + dma_free_writecombine(NULL, sizeof(struct w90p910_rxbd), + ether->rdesc, (dma_addr_t)ether->rdesc_phys); + dma_free_writecombine(NULL, sizeof(struct w90p910_txbd), + ether->tdesc, (dma_addr_t)ether->tdesc_phys); + + netif_stop_queue(dev); + + del_timer_sync(ðer->check_timer); + clk_disable(ether->rmiiclk); + clk_disable(ether->clk); + + free_irq(ether->txirq, dev); + free_irq(ether->rxirq, dev); + + return 0; +} + +static struct net_device_stats *w90p910_ether_stats(struct net_device *dev) +{ + struct w90p910_ether *ether; + + ether = netdev_priv(dev); + + return ðer->stats; +} + +static int w90p910_send_frame(struct net_device *dev, + unsigned char *data, int length) +{ + struct w90p910_ether *ether; + struct w90p910_txbd *txbd; + struct platform_device *pdev; + unsigned char *buffer; + + ether = netdev_priv(dev); + pdev = ether->pdev; + + txbd = ðer->tdesc->desclist[ether->cur_tx]; + buffer = ether->tdesc->tran_buf[ether->cur_tx]; + if (length > 1514) { + dev_err(&pdev->dev, "send data %d bytes, check it\n", length); + length = 1514; + } + + txbd->sl = length & 0xFFFF; + + memcpy(buffer, data, length); + + txbd->mode = TX_OWEN_DMA | PADDINGMODE | CRCMODE | MACTXINTEN; + + w90p910_enable_tx(dev, 1); + + w90p910_trigger_tx(dev); + + ether->cur_tx = (ether->cur_tx+1) % TX_DESC_SIZE; + txbd = ðer->tdesc->desclist[ether->cur_tx]; + + dev->trans_start = jiffies; + + if (txbd->mode & TX_OWEN_DMA) + netif_stop_queue(dev); + + return 0; +} + +static int w90p910_ether_start_xmit(struct sk_buff *skb, struct net_device *dev) +{ + struct w90p910_ether *ether = netdev_priv(dev); + + if (!(w90p910_send_frame(dev, skb->data, skb->len))) { + ether->skb = skb; + dev_kfree_skb_irq(skb); + return 0; + } + return -1; +} + +static irqreturn_t w90p910_tx_interrupt(int irq, void *dev_id) +{ + struct w90p910_ether *ether; + struct w90p910_txbd *txbd; + struct platform_device *pdev; + struct tran_pdesc *tran_pdesc; + struct net_device *dev; + unsigned int cur_entry, entry, status; + + dev = (struct net_device *)dev_id; + ether = netdev_priv(dev); + pdev = ether->pdev; + + spin_lock(ðer->lock); + + w90p910_get_and_clear_int(dev, &status); + + cur_entry = __raw_readl(ether->reg + REG_CTXDSA); + + tran_pdesc = ether->tdesc_phys; + entry = (unsigned int)(&tran_pdesc->desclist[ether->finish_tx]); + + while (entry != cur_entry) { + txbd = ðer->tdesc->desclist[ether->finish_tx]; + + ether->finish_tx = (ether->finish_tx + 1) % TX_DESC_SIZE; + + if (txbd->sl & TXDS_TXCP) { + ether->stats.tx_packets++; + ether->stats.tx_bytes += txbd->sl & 0xFFFF; + } else { + ether->stats.tx_errors++; + } + + txbd->sl = 0x0; + txbd->mode = 0x0; + + if (netif_queue_stopped(dev)) + netif_wake_queue(dev); + + entry = (unsigned int)(&tran_pdesc->desclist[ether->finish_tx]); + } + + if (status & MISTA_EXDEF) { + dev_err(&pdev->dev, "emc defer exceed interrupt\n"); + } else if (status & MISTA_TXBERR) { + dev_err(&pdev->dev, "emc bus error interrupt\n"); + w90p910_reset_mac(dev); + } else if (status & MISTA_TDU) { + if (netif_queue_stopped(dev)) + netif_wake_queue(dev); + } + + spin_unlock(ðer->lock); + + return IRQ_HANDLED; +} + +static void netdev_rx(struct net_device *dev) +{ + struct w90p910_ether *ether; + struct w90p910_rxbd *rxbd; + struct platform_device *pdev; + struct recv_pdesc *rdesc_phys; + struct sk_buff *skb; + unsigned char *data; + unsigned int length, status, val, entry; + + ether = netdev_priv(dev); + pdev = ether->pdev; + rdesc_phys = ether->rdesc_phys; + + rxbd = ðer->rdesc->desclist[ether->cur_rx]; + + do { + val = __raw_readl(ether->reg + REG_CRXDSA); + entry = (unsigned int)&rdesc_phys->desclist[ether->cur_rx]; + + if (val == entry) + break; + + status = rxbd->sl; + length = status & 0xFFFF; + + if (status & RXDS_RXGD) { + data = ether->rdesc->recv_buf[ether->cur_rx]; + skb = dev_alloc_skb(length+2); + if (!skb) { + dev_err(&pdev->dev, "get skb buffer error\n"); + ether->stats.rx_dropped++; + return; + } + + skb->dev = dev; + skb_reserve(skb, 2); + skb_put(skb, length); + skb_copy_to_linear_data(skb, data, length); + skb->protocol = eth_type_trans(skb, dev); + ether->stats.rx_packets++; + ether->stats.rx_bytes += length; + netif_rx(skb); + } else { + ether->stats.rx_errors++; + + if (status & RXDS_RP) { + dev_err(&pdev->dev, "rx runt err\n"); + ether->stats.rx_length_errors++; + } else if (status & RXDS_CRCE) { + dev_err(&pdev->dev, "rx crc err\n"); + ether->stats.rx_crc_errors++; + } + + if (status & RXDS_ALIE) { + dev_err(&pdev->dev, "rx aligment err\n"); + ether->stats.rx_frame_errors++; + } else if (status & RXDS_PTLE) { + dev_err(&pdev->dev, "rx longer err\n"); + ether->stats.rx_over_errors++; + } + } + + rxbd->sl = RX_OWEN_DMA; + rxbd->reserved = 0x0; + ether->cur_rx = (ether->cur_rx+1) % RX_DESC_SIZE; + rxbd = ðer->rdesc->desclist[ether->cur_rx]; + + dev->last_rx = jiffies; + } while (1); +} + +static irqreturn_t w90p910_rx_interrupt(int irq, void *dev_id) +{ + struct net_device *dev; + struct w90p910_ether *ether; + struct platform_device *pdev; + unsigned int status; + + dev = (struct net_device *)dev_id; + ether = netdev_priv(dev); + pdev = ether->pdev; + + spin_lock(ðer->lock); + + w90p910_get_and_clear_int(dev, &status); + + if (status & MISTA_RDU) { + netdev_rx(dev); + + w90p910_trigger_rx(dev); + + spin_unlock(ðer->lock); + return IRQ_HANDLED; + } else if (status & MISTA_RXBERR) { + dev_err(&pdev->dev, "emc rx bus error\n"); + w90p910_reset_mac(dev); + } + + netdev_rx(dev); + spin_unlock(ðer->lock); + return IRQ_HANDLED; +} + +static int w90p910_ether_open(struct net_device *dev) +{ + struct w90p910_ether *ether; + struct platform_device *pdev; + + ether = netdev_priv(dev); + pdev = ether->pdev; + + w90p910_reset_mac(dev); + w90p910_set_fifo_threshold(dev); + w90p910_set_curdest(dev); + w90p910_enable_cam(dev); + w90p910_enable_cam_command(dev); + w90p910_enable_mac_interrupt(dev); + w90p910_set_global_maccmd(dev); + w90p910_enable_rx(dev, 1); + + ether->rx_packets = 0x0; + ether->rx_bytes = 0x0; + + if (request_irq(ether->txirq, w90p910_tx_interrupt, + 0x0, pdev->name, dev)) { + dev_err(&pdev->dev, "register irq tx failed\n"); + return -EAGAIN; + } + + if (request_irq(ether->rxirq, w90p910_rx_interrupt, + 0x0, pdev->name, dev)) { + dev_err(&pdev->dev, "register irq rx failed\n"); + return -EAGAIN; + } + + mod_timer(ðer->check_timer, jiffies + msecs_to_jiffies(1000)); + netif_start_queue(dev); + w90p910_trigger_rx(dev); + + dev_info(&pdev->dev, "%s is OPENED\n", dev->name); + + return 0; +} + +static void w90p910_ether_set_multicast_list(struct net_device *dev) +{ + struct w90p910_ether *ether; + unsigned int rx_mode; + + ether = netdev_priv(dev); + + if (dev->flags & IFF_PROMISC) + rx_mode = CAMCMR_AUP | CAMCMR_AMP | CAMCMR_ABP | CAMCMR_ECMP; + else if ((dev->flags & IFF_ALLMULTI) || dev->mc_list) + rx_mode = CAMCMR_AMP | CAMCMR_ABP | CAMCMR_ECMP; + else + rx_mode = CAMCMR_ECMP | CAMCMR_ABP; + __raw_writel(rx_mode, ether->reg + REG_CAMCMR); +} + +static int w90p910_ether_ioctl(struct net_device *dev, + struct ifreq *ifr, int cmd) +{ + struct w90p910_ether *ether = netdev_priv(dev); + struct mii_ioctl_data *data = if_mii(ifr); + + return generic_mii_ioctl(ðer->mii, data, cmd, NULL); +} + +static void w90p910_get_drvinfo(struct net_device *dev, + struct ethtool_drvinfo *info) +{ + strcpy(info->driver, DRV_MODULE_NAME); + strcpy(info->version, DRV_MODULE_VERSION); +} + +static int w90p910_get_settings(struct net_device *dev, struct ethtool_cmd *cmd) +{ + struct w90p910_ether *ether = netdev_priv(dev); + return mii_ethtool_gset(ðer->mii, cmd); +} + +static int w90p910_set_settings(struct net_device *dev, struct ethtool_cmd *cmd) +{ + struct w90p910_ether *ether = netdev_priv(dev); + return mii_ethtool_sset(ðer->mii, cmd); +} + +static int w90p910_nway_reset(struct net_device *dev) +{ + struct w90p910_ether *ether = netdev_priv(dev); + return mii_nway_restart(ðer->mii); +} + +static u32 w90p910_get_link(struct net_device *dev) +{ + struct w90p910_ether *ether = netdev_priv(dev); + return mii_link_ok(ðer->mii); +} + +static const struct ethtool_ops w90p910_ether_ethtool_ops = { + .get_settings = w90p910_get_settings, + .set_settings = w90p910_set_settings, + .get_drvinfo = w90p910_get_drvinfo, + .nway_reset = w90p910_nway_reset, + .get_link = w90p910_get_link, +}; + +static const struct net_device_ops w90p910_ether_netdev_ops = { + .ndo_open = w90p910_ether_open, + .ndo_stop = w90p910_ether_close, + .ndo_start_xmit = w90p910_ether_start_xmit, + .ndo_get_stats = w90p910_ether_stats, + .ndo_set_multicast_list = w90p910_ether_set_multicast_list, + .ndo_set_mac_address = set_mac_address, + .ndo_do_ioctl = w90p910_ether_ioctl, + .ndo_validate_addr = eth_validate_addr, + .ndo_change_mtu = eth_change_mtu, +}; + +static void __init get_mac_address(struct net_device *dev) +{ + struct w90p910_ether *ether = netdev_priv(dev); + struct platform_device *pdev; + char addr[6]; + + pdev = ether->pdev; + + addr[0] = 0x00; + addr[1] = 0x02; + addr[2] = 0xac; + addr[3] = 0x55; + addr[4] = 0x88; + addr[5] = 0xa8; + + if (is_valid_ether_addr(addr)) + memcpy(dev->dev_addr, &addr, 0x06); + else + dev_err(&pdev->dev, "invalid mac address\n"); +} + +static int w90p910_ether_setup(struct net_device *dev) +{ + struct w90p910_ether *ether = netdev_priv(dev); + + ether_setup(dev); + dev->netdev_ops = &w90p910_ether_netdev_ops; + dev->ethtool_ops = &w90p910_ether_ethtool_ops; + + dev->tx_queue_len = 16; + dev->dma = 0x0; + dev->watchdog_timeo = TX_TIMEOUT; + + get_mac_address(dev); + + spin_lock_init(ðer->lock); + + ether->cur_tx = 0x0; + ether->cur_rx = 0x0; + ether->finish_tx = 0x0; + ether->linkflag = 0x0; + ether->mii.phy_id = 0x01; + ether->mii.phy_id_mask = 0x1f; + ether->mii.reg_num_mask = 0x1f; + ether->mii.dev = dev; + ether->mii.mdio_read = w90p910_mdio_read; + ether->mii.mdio_write = w90p910_mdio_write; + + setup_timer(ðer->check_timer, w90p910_check_link, + (unsigned long)dev); + + return 0; +} + +static int __devinit w90p910_ether_probe(struct platform_device *pdev) +{ + struct w90p910_ether *ether; + struct net_device *dev; + struct resource *res; + int error; + + dev = alloc_etherdev(sizeof(struct w90p910_ether)); + if (!dev) + return -ENOMEM; + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + if (res == NULL) { + dev_err(&pdev->dev, "failed to get I/O memory\n"); + error = -ENXIO; + goto failed_free; + } + + res = request_mem_region(res->start, resource_size(res), pdev->name); + if (res == NULL) { + dev_err(&pdev->dev, "failed to request I/O memory\n"); + error = -EBUSY; + goto failed_free; + } + + ether = netdev_priv(dev); + + ether->reg = ioremap(res->start, resource_size(res)); + if (ether->reg == NULL) { + dev_err(&pdev->dev, "failed to remap I/O memory\n"); + error = -ENXIO; + goto failed_free_mem; + } + + ether->txirq = platform_get_irq(pdev, 0); + if (ether->txirq < 0) { + dev_err(&pdev->dev, "failed to get ether tx irq\n"); + error = -ENXIO; + goto failed_free_io; + } + + ether->rxirq = platform_get_irq(pdev, 1); + if (ether->rxirq < 0) { + dev_err(&pdev->dev, "failed to get ether rx irq\n"); + error = -ENXIO; + goto failed_free_txirq; + } + + platform_set_drvdata(pdev, dev); + + ether->clk = clk_get(&pdev->dev, NULL); + if (IS_ERR(ether->clk)) { + dev_err(&pdev->dev, "failed to get ether clock\n"); + error = PTR_ERR(ether->clk); + goto failed_free_rxirq; + } + + ether->rmiiclk = clk_get(&pdev->dev, "RMII"); + if (IS_ERR(ether->rmiiclk)) { + dev_err(&pdev->dev, "failed to get ether clock\n"); + error = PTR_ERR(ether->rmiiclk); + goto failed_put_clk; + } + + ether->pdev = pdev; + + w90p910_ether_setup(dev); + + error = register_netdev(dev); + if (error != 0) { + dev_err(&pdev->dev, "Regiter EMC w90p910 FAILED\n"); + error = -ENODEV; + goto failed_put_rmiiclk; + } + + return 0; +failed_put_rmiiclk: + clk_put(ether->rmiiclk); +failed_put_clk: + clk_put(ether->clk); +failed_free_rxirq: + free_irq(ether->rxirq, pdev); + platform_set_drvdata(pdev, NULL); +failed_free_txirq: + free_irq(ether->txirq, pdev); +failed_free_io: + iounmap(ether->reg); +failed_free_mem: + release_mem_region(res->start, resource_size(res)); +failed_free: + free_netdev(dev); + return error; +} + +static int __devexit w90p910_ether_remove(struct platform_device *pdev) +{ + struct net_device *dev = platform_get_drvdata(pdev); + struct w90p910_ether *ether = netdev_priv(dev); + + unregister_netdev(dev); + clk_put(ether->rmiiclk); + clk_put(ether->clk); + del_timer_sync(ðer->check_timer); + platform_set_drvdata(pdev, NULL); + free_netdev(dev); + return 0; +} + +static struct platform_driver w90p910_ether_driver = { + .probe = w90p910_ether_probe, + .remove = __devexit_p(w90p910_ether_remove), + .driver = { + .name = "w90p910-emc", + .owner = THIS_MODULE, + }, +}; + +static int __init w90p910_ether_init(void) +{ + return platform_driver_register(&w90p910_ether_driver); +} + +static void __exit w90p910_ether_exit(void) +{ + platform_driver_unregister(&w90p910_ether_driver); +} + +module_init(w90p910_ether_init); +module_exit(w90p910_ether_exit); + +MODULE_AUTHOR("Wan ZongShun "); +MODULE_DESCRIPTION("w90p910 MAC driver!"); +MODULE_LICENSE("GPL"); +MODULE_ALIAS("platform:w90p910-emc"); + -- cgit v1.2.3 From e3afe7b75ed8f809c1473ea9b39267487c187ccb Mon Sep 17 00:00:00 2001 From: John Dykstra Date: Thu, 16 Jul 2009 05:04:51 +0000 Subject: tcp: Fix MD5 signature checking on IPv4 mapped sockets Fix MD5 signature checking so that an IPv4 active open to an IPv6 socket can succeed. In particular, use the correct address family's signature generation function for the SYN/ACK. Reported-by: Stephen Hemminger Signed-off-by: John Dykstra Signed-off-by: David S. Miller --- include/net/tcp.h | 5 +++++ net/ipv4/tcp_ipv4.c | 1 + net/ipv4/tcp_output.c | 2 +- net/ipv6/tcp_ipv6.c | 1 + 4 files changed, 8 insertions(+), 1 deletion(-) diff --git a/include/net/tcp.h b/include/net/tcp.h index 19f4150f4d4..88af8430647 100644 --- a/include/net/tcp.h +++ b/include/net/tcp.h @@ -1425,6 +1425,11 @@ struct tcp_request_sock_ops { #ifdef CONFIG_TCP_MD5SIG struct tcp_md5sig_key *(*md5_lookup) (struct sock *sk, struct request_sock *req); + int (*calc_md5_hash) (char *location, + struct tcp_md5sig_key *md5, + struct sock *sk, + struct request_sock *req, + struct sk_buff *skb); #endif }; diff --git a/net/ipv4/tcp_ipv4.c b/net/ipv4/tcp_ipv4.c index 5a1ca2698c8..7c107eb876c 100644 --- a/net/ipv4/tcp_ipv4.c +++ b/net/ipv4/tcp_ipv4.c @@ -1160,6 +1160,7 @@ struct request_sock_ops tcp_request_sock_ops __read_mostly = { #ifdef CONFIG_TCP_MD5SIG static struct tcp_request_sock_ops tcp_request_sock_ipv4_ops = { .md5_lookup = tcp_v4_reqsk_md5_lookup, + .calc_md5_hash = tcp_v4_md5_hash_skb, }; #endif diff --git a/net/ipv4/tcp_output.c b/net/ipv4/tcp_output.c index 5bdf08d312d..bd62712848f 100644 --- a/net/ipv4/tcp_output.c +++ b/net/ipv4/tcp_output.c @@ -2261,7 +2261,7 @@ struct sk_buff *tcp_make_synack(struct sock *sk, struct dst_entry *dst, #ifdef CONFIG_TCP_MD5SIG /* Okay, we have all we need - do the md5 hash if needed */ if (md5) { - tp->af_specific->calc_md5_hash(md5_hash_location, + tcp_rsk(req)->af_specific->calc_md5_hash(md5_hash_location, md5, NULL, req, skb); } #endif diff --git a/net/ipv6/tcp_ipv6.c b/net/ipv6/tcp_ipv6.c index 58810c65b63..ae3d6575356 100644 --- a/net/ipv6/tcp_ipv6.c +++ b/net/ipv6/tcp_ipv6.c @@ -896,6 +896,7 @@ struct request_sock_ops tcp6_request_sock_ops __read_mostly = { #ifdef CONFIG_TCP_MD5SIG static struct tcp_request_sock_ops tcp_request_sock_ipv6_ops = { .md5_lookup = tcp_v6_reqsk_md5_lookup, + .calc_md5_hash = tcp_v6_md5_hash_skb, }; #endif -- cgit v1.2.3 From e547bc1eccf539b7403138d8ded913ffd2b7fd0d Mon Sep 17 00:00:00 2001 From: John Dykstra Date: Fri, 17 Jul 2009 09:23:22 +0000 Subject: tcp: Use correct peer adr when copying MD5 keys When the TCP connection handshake completes on the passive side, a variety of state must be set up in the "child" sock, including the key if MD5 authentication is being used. Fix TCP for both address families to label the key with the peer's destination address, rather than the address from the listening sock, which is usually the wildcard. Reported-by: Stephen Hemminger Signed-off-by: John Dykstra Signed-off-by: David S. Miller --- net/ipv4/tcp_ipv4.c | 2 +- net/ipv6/tcp_ipv6.c | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/net/ipv4/tcp_ipv4.c b/net/ipv4/tcp_ipv4.c index 7c107eb876c..6d88219c5e2 100644 --- a/net/ipv4/tcp_ipv4.c +++ b/net/ipv4/tcp_ipv4.c @@ -1374,7 +1374,7 @@ struct sock *tcp_v4_syn_recv_sock(struct sock *sk, struct sk_buff *skb, */ char *newkey = kmemdup(key->key, key->keylen, GFP_ATOMIC); if (newkey != NULL) - tcp_v4_md5_do_add(newsk, inet_sk(sk)->daddr, + tcp_v4_md5_do_add(newsk, newinet->daddr, newkey, key->keylen); newsk->sk_route_caps &= ~NETIF_F_GSO_MASK; } diff --git a/net/ipv6/tcp_ipv6.c b/net/ipv6/tcp_ipv6.c index ae3d6575356..d849dd53b78 100644 --- a/net/ipv6/tcp_ipv6.c +++ b/net/ipv6/tcp_ipv6.c @@ -1442,7 +1442,7 @@ static struct sock * tcp_v6_syn_recv_sock(struct sock *sk, struct sk_buff *skb, */ char *newkey = kmemdup(key->key, key->keylen, GFP_ATOMIC); if (newkey != NULL) - tcp_v6_md5_do_add(newsk, &inet6_sk(sk)->daddr, + tcp_v6_md5_do_add(newsk, &newnp->daddr, newkey, key->keylen); } #endif -- cgit v1.2.3 From 55fe27f7e2c9d24ce870136bd99ae67b020122d1 Mon Sep 17 00:00:00 2001 From: Frank Roth Date: Mon, 20 Jul 2009 17:00:14 +0200 Subject: ALSA: ctxfi: Swapped SURROUND-SIDE channels on emu20k2 On Soundblaster X-FI Titanium with emu20k2 the SIDE and SURROUND channels were swapped and wrong. I double checked it with connector colors and creative soundblaster windows drivers. So I swapped them to the true order. Now "speaker-test -c6" and "speaker-test -c8" are working fine. Signed-off-by: Frank Roth Signed-off-by: Takashi Iwai --- sound/pci/ctxfi/ctdaio.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/sound/pci/ctxfi/ctdaio.c b/sound/pci/ctxfi/ctdaio.c index 082e35c08c0..deb6cfa7360 100644 --- a/sound/pci/ctxfi/ctdaio.c +++ b/sound/pci/ctxfi/ctdaio.c @@ -57,9 +57,9 @@ struct daio_rsc_idx idx_20k1[NUM_DAIOTYP] = { struct daio_rsc_idx idx_20k2[NUM_DAIOTYP] = { [LINEO1] = {.left = 0x40, .right = 0x41}, - [LINEO2] = {.left = 0x70, .right = 0x71}, + [LINEO2] = {.left = 0x60, .right = 0x61}, [LINEO3] = {.left = 0x50, .right = 0x51}, - [LINEO4] = {.left = 0x60, .right = 0x61}, + [LINEO4] = {.left = 0x70, .right = 0x71}, [LINEIM] = {.left = 0x45, .right = 0xc5}, [SPDIFOO] = {.left = 0x00, .right = 0x01}, [SPDIFIO] = {.left = 0x05, .right = 0x85}, -- cgit v1.2.3 From 3ba81f3ece3cfa4ffb06d21ac93b8cad7fbe6a73 Mon Sep 17 00:00:00 2001 From: Ben Dooks Date: Thu, 16 Jul 2009 05:24:08 +0000 Subject: net: Micrel KS8851 SPI network driver Network driver for the SPI version of the Micrel KS8851 network chip. Signed-off-by: Ben Dooks Signed-off-by: David S. Miller --- drivers/net/Kconfig | 6 + drivers/net/Makefile | 1 + drivers/net/ks8851.c | 1322 ++++++++++++++++++++++++++++++++++++++++++++++++++ drivers/net/ks8851.h | 296 +++++++++++ 4 files changed, 1625 insertions(+) create mode 100644 drivers/net/ks8851.c create mode 100644 drivers/net/ks8851.h diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig index c155bd3ec9f..b5a7513df4e 100644 --- a/drivers/net/Kconfig +++ b/drivers/net/Kconfig @@ -1729,6 +1729,12 @@ config KS8842 help This platform driver is for Micrel KSZ8842 chip. +config KS8851 + tristate "Micrel KS8851 SPI" + depends on SPI + help + SPI driver for Micrel KS8851 SPI attached network chip. + config VIA_RHINE tristate "VIA Rhine support" depends on NET_PCI && PCI diff --git a/drivers/net/Makefile b/drivers/net/Makefile index 4b58a59f211..ead8cab3cfe 100644 --- a/drivers/net/Makefile +++ b/drivers/net/Makefile @@ -88,6 +88,7 @@ obj-$(CONFIG_SKGE) += skge.o obj-$(CONFIG_SKY2) += sky2.o obj-$(CONFIG_SKFP) += skfp/ obj-$(CONFIG_KS8842) += ks8842.o +obj-$(CONFIG_KS8851) += ks8851.o obj-$(CONFIG_VIA_RHINE) += via-rhine.o obj-$(CONFIG_VIA_VELOCITY) += via-velocity.o obj-$(CONFIG_ADAPTEC_STARFIRE) += starfire.o diff --git a/drivers/net/ks8851.c b/drivers/net/ks8851.c new file mode 100644 index 00000000000..9a1dea60c1c --- /dev/null +++ b/drivers/net/ks8851.c @@ -0,0 +1,1322 @@ +/* drivers/net/ks8651.c + * + * Copyright 2009 Simtec Electronics + * http://www.simtec.co.uk/ + * Ben Dooks + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#define DEBUG + +#include +#include +#include +#include +#include +#include +#include +#include + +#include + +#include "ks8851.h" + +/** + * struct ks8851_rxctrl - KS8851 driver rx control + * @mchash: Multicast hash-table data. + * @rxcr1: KS_RXCR1 register setting + * @rxcr2: KS_RXCR2 register setting + * + * Representation of the settings needs to control the receive filtering + * such as the multicast hash-filter and the receive register settings. This + * is used to make the job of working out if the receive settings change and + * then issuing the new settings to the worker that will send the necessary + * commands. + */ +struct ks8851_rxctrl { + u16 mchash[4]; + u16 rxcr1; + u16 rxcr2; +}; + +/** + * union ks8851_tx_hdr - tx header data + * @txb: The header as bytes + * @txw: The header as 16bit, little-endian words + * + * A dual representation of the tx header data to allow + * access to individual bytes, and to allow 16bit accesses + * with 16bit alignment. + */ +union ks8851_tx_hdr { + u8 txb[6]; + __le16 txw[3]; +}; + +/** + * struct ks8851_net - KS8851 driver private data + * @netdev: The network device we're bound to + * @spidev: The spi device we're bound to. + * @lock: Lock to ensure that the device is not accessed when busy. + * @statelock: Lock on this structure for tx list. + * @mii: The MII state information for the mii calls. + * @rxctrl: RX settings for @rxctrl_work. + * @tx_work: Work queue for tx packets + * @irq_work: Work queue for servicing interrupts + * @rxctrl_work: Work queue for updating RX mode and multicast lists + * @txq: Queue of packets for transmission. + * @spi_msg1: pre-setup SPI transfer with one message, @spi_xfer1. + * @spi_msg2: pre-setup SPI transfer with two messages, @spi_xfer2. + * @txh: Space for generating packet TX header in DMA-able data + * @rxd: Space for receiving SPI data, in DMA-able space. + * @txd: Space for transmitting SPI data, in DMA-able space. + * @msg_enable: The message flags controlling driver output (see ethtool). + * @fid: Incrementing frame id tag. + * @rc_ier: Cached copy of KS_IER. + * @rc_rxqcr: Cached copy of KS_RXQCR. + * + * The @lock ensures that the chip is protected when certain operations are + * in progress. When the read or write packet transfer is in progress, most + * of the chip registers are not ccessible until the transfer is finished and + * the DMA has been de-asserted. + * + * The @statelock is used to protect information in the structure which may + * need to be accessed via several sources, such as the network driver layer + * or one of the work queues. + * + * We align the buffers we may use for rx/tx to ensure that if the SPI driver + * wants to DMA map them, it will not have any problems with data the driver + * modifies. + */ +struct ks8851_net { + struct net_device *netdev; + struct spi_device *spidev; + struct mutex lock; + spinlock_t statelock; + + union ks8851_tx_hdr txh ____cacheline_aligned; + u8 rxd[8]; + u8 txd[8]; + + u32 msg_enable ____cacheline_aligned; + u16 tx_space; + u8 fid; + + u16 rc_ier; + u16 rc_rxqcr; + + struct mii_if_info mii; + struct ks8851_rxctrl rxctrl; + + struct work_struct tx_work; + struct work_struct irq_work; + struct work_struct rxctrl_work; + + struct sk_buff_head txq; + + struct spi_message spi_msg1; + struct spi_message spi_msg2; + struct spi_transfer spi_xfer1; + struct spi_transfer spi_xfer2[2]; +}; + +static int msg_enable; + +#define ks_info(_ks, _msg...) dev_info(&(_ks)->spidev->dev, _msg) +#define ks_warn(_ks, _msg...) dev_warn(&(_ks)->spidev->dev, _msg) +#define ks_dbg(_ks, _msg...) dev_dbg(&(_ks)->spidev->dev, _msg) +#define ks_err(_ks, _msg...) dev_err(&(_ks)->spidev->dev, _msg) + +/* shift for byte-enable data */ +#define BYTE_EN(_x) ((_x) << 2) + +/* turn register number and byte-enable mask into data for start of packet */ +#define MK_OP(_byteen, _reg) (BYTE_EN(_byteen) | (_reg) << (8+2) | (_reg) >> 6) + +/* SPI register read/write calls. + * + * All these calls issue SPI transactions to access the chip's registers. They + * all require that the necessary lock is held to prevent accesses when the + * chip is busy transfering packet data (RX/TX FIFO accesses). + */ + +/** + * ks8851_wrreg16 - write 16bit register value to chip + * @ks: The chip state + * @reg: The register address + * @val: The value to write + * + * Issue a write to put the value @val into the register specified in @reg. + */ +static void ks8851_wrreg16(struct ks8851_net *ks, unsigned reg, unsigned val) +{ + struct spi_transfer *xfer = &ks->spi_xfer1; + struct spi_message *msg = &ks->spi_msg1; + __le16 txb[2]; + int ret; + + txb[0] = cpu_to_le16(MK_OP(reg & 2 ? 0xC : 0x03, reg) | KS_SPIOP_WR); + txb[1] = cpu_to_le16(val); + + xfer->tx_buf = txb; + xfer->rx_buf = NULL; + xfer->len = 4; + + ret = spi_sync(ks->spidev, msg); + if (ret < 0) + ks_err(ks, "spi_sync() failed\n"); +} + +/** + * ks8851_rx_1msg - select whether to use one or two messages for spi read + * @ks: The device structure + * + * Return whether to generate a single message with a tx and rx buffer + * supplied to spi_sync(), or alternatively send the tx and rx buffers + * as separate messages. + * + * Depending on the hardware in use, a single message may be more efficient + * on interrupts or work done by the driver. + * + * This currently always returns true until we add some per-device data passed + * from the platform code to specify which mode is better. + */ +static inline bool ks8851_rx_1msg(struct ks8851_net *ks) +{ + return true; +} + +/** + * ks8851_rdreg - issue read register command and return the data + * @ks: The device state + * @op: The register address and byte enables in message format. + * @rxb: The RX buffer to return the result into + * @rxl: The length of data expected. + * + * This is the low level read call that issues the necessary spi message(s) + * to read data from the register specified in @op. + */ +static void ks8851_rdreg(struct ks8851_net *ks, unsigned op, + u8 *rxb, unsigned rxl) +{ + struct spi_transfer *xfer; + struct spi_message *msg; + __le16 *txb = (__le16 *)ks->txd; + u8 *trx = ks->rxd; + int ret; + + txb[0] = cpu_to_le16(op | KS_SPIOP_RD); + + if (ks8851_rx_1msg(ks)) { + msg = &ks->spi_msg1; + xfer = &ks->spi_xfer1; + + xfer->tx_buf = txb; + xfer->rx_buf = trx; + xfer->len = rxl + 2; + } else { + msg = &ks->spi_msg2; + xfer = ks->spi_xfer2; + + xfer->tx_buf = txb; + xfer->rx_buf = NULL; + xfer->len = 2; + + xfer++; + xfer->tx_buf = NULL; + xfer->rx_buf = trx; + xfer->len = rxl; + } + + ret = spi_sync(ks->spidev, msg); + if (ret < 0) + ks_err(ks, "read: spi_sync() failed\n"); + else if (ks8851_rx_1msg(ks)) + memcpy(rxb, trx + 2, rxl); + else + memcpy(rxb, trx, rxl); +} + +/** + * ks8851_rdreg8 - read 8 bit register from device + * @ks: The chip information + * @reg: The register address + * + * Read a 8bit register from the chip, returning the result +*/ +static unsigned ks8851_rdreg8(struct ks8851_net *ks, unsigned reg) +{ + u8 rxb[1]; + + ks8851_rdreg(ks, MK_OP(1 << (reg & 3), reg), rxb, 1); + return rxb[0]; +} + +/** + * ks8851_rdreg16 - read 16 bit register from device + * @ks: The chip information + * @reg: The register address + * + * Read a 16bit register from the chip, returning the result +*/ +static unsigned ks8851_rdreg16(struct ks8851_net *ks, unsigned reg) +{ + __le16 rx = 0; + + ks8851_rdreg(ks, MK_OP(reg & 2 ? 0xC : 0x3, reg), (u8 *)&rx, 2); + return le16_to_cpu(rx); +} + +/** + * ks8851_rdreg32 - read 32 bit register from device + * @ks: The chip information + * @reg: The register address + * + * Read a 32bit register from the chip. + * + * Note, this read requires the address be aligned to 4 bytes. +*/ +static unsigned ks8851_rdreg32(struct ks8851_net *ks, unsigned reg) +{ + __le32 rx = 0; + + WARN_ON(reg & 3); + + ks8851_rdreg(ks, MK_OP(0xf, reg), (u8 *)&rx, 4); + return le32_to_cpu(rx); +} + +/** + * ks8851_soft_reset - issue one of the soft reset to the device + * @ks: The device state. + * @op: The bit(s) to set in the GRR + * + * Issue the relevant soft-reset command to the device's GRR register + * specified by @op. + * + * Note, the delays are in there as a caution to ensure that the reset + * has time to take effect and then complete. Since the datasheet does + * not currently specify the exact sequence, we have chosen something + * that seems to work with our device. + */ +static void ks8851_soft_reset(struct ks8851_net *ks, unsigned op) +{ + ks8851_wrreg16(ks, KS_GRR, op); + mdelay(1); /* wait a short time to effect reset */ + ks8851_wrreg16(ks, KS_GRR, 0); + mdelay(1); /* wait for condition to clear */ +} + +/** + * ks8851_write_mac_addr - write mac address to device registers + * @dev: The network device + * + * Update the KS8851 MAC address registers from the address in @dev. + * + * This call assumes that the chip is not running, so there is no need to + * shutdown the RXQ process whilst setting this. +*/ +static int ks8851_write_mac_addr(struct net_device *dev) +{ + struct ks8851_net *ks = netdev_priv(dev); + u16 *mcp = (u16 *)dev->dev_addr; + + mutex_lock(&ks->lock); + + ks8851_wrreg16(ks, KS_MARL, mcp[0]); + ks8851_wrreg16(ks, KS_MARM, mcp[1]); + ks8851_wrreg16(ks, KS_MARH, mcp[2]); + + mutex_unlock(&ks->lock); + + return 0; +} + +/** + * ks8851_init_mac - initialise the mac address + * @ks: The device structure + * + * Get or create the initial mac address for the device and then set that + * into the station address register. Currently we assume that the device + * does not have a valid mac address in it, and so we use random_ether_addr() + * to create a new one. + * + * In future, the driver should check to see if the device has an EEPROM + * attached and whether that has a valid ethernet address in it. + */ +static void ks8851_init_mac(struct ks8851_net *ks) +{ + struct net_device *dev = ks->netdev; + + random_ether_addr(dev->dev_addr); + ks8851_write_mac_addr(dev); +} + +/** + * ks8851_irq - device interrupt handler + * @irq: Interrupt number passed from the IRQ hnalder. + * @pw: The private word passed to register_irq(), our struct ks8851_net. + * + * Disable the interrupt from happening again until we've processed the + * current status by scheduling ks8851_irq_work(). + */ +static irqreturn_t ks8851_irq(int irq, void *pw) +{ + struct ks8851_net *ks = pw; + + disable_irq_nosync(irq); + schedule_work(&ks->irq_work); + return IRQ_HANDLED; +} + +/** + * ks8851_rdfifo - read data from the receive fifo + * @ks: The device state. + * @buff: The buffer address + * @len: The length of the data to read + * + * Issue an RXQ FIFO read command and read the @len ammount of data from + * the FIFO into the buffer specified by @buff. + */ +static void ks8851_rdfifo(struct ks8851_net *ks, u8 *buff, unsigned len) +{ + struct spi_transfer *xfer = ks->spi_xfer2; + struct spi_message *msg = &ks->spi_msg2; + u8 txb[1]; + int ret; + + if (netif_msg_rx_status(ks)) + ks_dbg(ks, "%s: %d@%p\n", __func__, len, buff); + + /* set the operation we're issuing */ + txb[0] = KS_SPIOP_RXFIFO; + + xfer->tx_buf = txb; + xfer->rx_buf = NULL; + xfer->len = 1; + + xfer++; + xfer->rx_buf = buff; + xfer->tx_buf = NULL; + xfer->len = len; + + ret = spi_sync(ks->spidev, msg); + if (ret < 0) + ks_err(ks, "%s: spi_sync() failed\n", __func__); +} + +/** + * ks8851_dbg_dumpkkt - dump initial packet contents to debug + * @ks: The device state + * @rxpkt: The data for the received packet + * + * Dump the initial data from the packet to dev_dbg(). +*/ +static void ks8851_dbg_dumpkkt(struct ks8851_net *ks, u8 *rxpkt) +{ + ks_dbg(ks, "pkt %02x%02x%02x%02x %02x%02x%02x%02x %02x%02x%02x%02x\n", + rxpkt[4], rxpkt[5], rxpkt[6], rxpkt[7], + rxpkt[8], rxpkt[9], rxpkt[10], rxpkt[11], + rxpkt[12], rxpkt[13], rxpkt[14], rxpkt[15]); +} + +/** + * ks8851_rx_pkts - receive packets from the host + * @ks: The device information. + * + * This is called from the IRQ work queue when the system detects that there + * are packets in the receive queue. Find out how many packets there are and + * read them from the FIFO. + */ +static void ks8851_rx_pkts(struct ks8851_net *ks) +{ + struct sk_buff *skb; + unsigned rxfc; + unsigned rxlen; + unsigned rxstat; + u32 rxh; + u8 *rxpkt; + + rxfc = ks8851_rdreg8(ks, KS_RXFC); + + if (netif_msg_rx_status(ks)) + ks_dbg(ks, "%s: %d packets\n", __func__, rxfc); + + /* Currently we're issuing a read per packet, but we could possibly + * improve the code by issuing a single read, getting the receive + * header, allocating the packet and then reading the packet data + * out in one go. + * + * This form of operation would require us to hold the SPI bus' + * chipselect low during the entie transaction to avoid any + * reset to the data stream comming from the chip. + */ + + for (; rxfc != 0; rxfc--) { + rxh = ks8851_rdreg32(ks, KS_RXFHSR); + rxstat = rxh & 0xffff; + rxlen = rxh >> 16; + + if (netif_msg_rx_status(ks)) + ks_dbg(ks, "rx: stat 0x%04x, len 0x%04x\n", + rxstat, rxlen); + + /* the length of the packet includes the 32bit CRC */ + + /* set dma read address */ + ks8851_wrreg16(ks, KS_RXFDPR, RXFDPR_RXFPAI | 0x00); + + /* start the packet dma process, and set auto-dequeue rx */ + ks8851_wrreg16(ks, KS_RXQCR, + ks->rc_rxqcr | RXQCR_SDA | RXQCR_ADRFE); + + if (rxlen > 0) { + skb = netdev_alloc_skb(ks->netdev, rxlen + 2 + 8); + if (!skb) { + /* todo - dump frame and move on */ + } + + /* two bytes to ensure ip is aligned, and four bytes + * for the status header and 4 bytes of garbage */ + skb_reserve(skb, 2 + 4 + 4); + + rxpkt = skb_put(skb, rxlen - 4) - 8; + + /* align the packet length to 4 bytes, and add 4 bytes + * as we're getting the rx status header as well */ + ks8851_rdfifo(ks, rxpkt, ALIGN(rxlen, 4) + 8); + + if (netif_msg_pktdata(ks)) + ks8851_dbg_dumpkkt(ks, rxpkt); + + skb->protocol = eth_type_trans(skb, ks->netdev); + netif_rx(skb); + + ks->netdev->stats.rx_packets++; + ks->netdev->stats.rx_bytes += rxlen - 4; + } + + ks8851_wrreg16(ks, KS_RXQCR, ks->rc_rxqcr); + } +} + +/** + * ks8851_irq_work - work queue handler for dealing with interrupt requests + * @work: The work structure that was scheduled by schedule_work() + * + * This is the handler invoked when the ks8851_irq() is called to find out + * what happened, as we cannot allow ourselves to sleep whilst waiting for + * anything other process has the chip's lock. + * + * Read the interrupt status, work out what needs to be done and then clear + * any of the interrupts that are not needed. + */ +static void ks8851_irq_work(struct work_struct *work) +{ + struct ks8851_net *ks = container_of(work, struct ks8851_net, irq_work); + unsigned status; + unsigned handled = 0; + + mutex_lock(&ks->lock); + + status = ks8851_rdreg16(ks, KS_ISR); + + if (netif_msg_intr(ks)) + dev_dbg(&ks->spidev->dev, "%s: status 0x%04x\n", + __func__, status); + + if (status & IRQ_LCI) { + /* should do something about checking link status */ + handled |= IRQ_LCI; + } + + if (status & IRQ_LDI) { + u16 pmecr = ks8851_rdreg16(ks, KS_PMECR); + pmecr &= ~PMECR_WKEVT_MASK; + ks8851_wrreg16(ks, KS_PMECR, pmecr | PMECR_WKEVT_LINK); + + handled |= IRQ_LDI; + } + + if (status & IRQ_RXPSI) + handled |= IRQ_RXPSI; + + if (status & IRQ_TXI) { + handled |= IRQ_TXI; + + /* no lock here, tx queue should have been stopped */ + + /* update our idea of how much tx space is available to the + * system */ + ks->tx_space = ks8851_rdreg16(ks, KS_TXMIR); + + if (netif_msg_intr(ks)) + ks_dbg(ks, "%s: txspace %d\n", __func__, ks->tx_space); + } + + if (status & IRQ_RXI) + handled |= IRQ_RXI; + + if (status & IRQ_SPIBEI) { + dev_err(&ks->spidev->dev, "%s: spi bus error\n", __func__); + handled |= IRQ_SPIBEI; + } + + ks8851_wrreg16(ks, KS_ISR, handled); + + if (status & IRQ_RXI) { + /* the datasheet says to disable the rx interrupt during + * packet read-out, however we're masking the interrupt + * from the device so do not bother masking just the RX + * from the device. */ + + ks8851_rx_pkts(ks); + } + + /* if something stopped the rx process, probably due to wanting + * to change the rx settings, then do something about restarting + * it. */ + if (status & IRQ_RXPSI) { + struct ks8851_rxctrl *rxc = &ks->rxctrl; + + /* update the multicast hash table */ + ks8851_wrreg16(ks, KS_MAHTR0, rxc->mchash[0]); + ks8851_wrreg16(ks, KS_MAHTR1, rxc->mchash[1]); + ks8851_wrreg16(ks, KS_MAHTR2, rxc->mchash[2]); + ks8851_wrreg16(ks, KS_MAHTR3, rxc->mchash[3]); + + ks8851_wrreg16(ks, KS_RXCR2, rxc->rxcr2); + ks8851_wrreg16(ks, KS_RXCR1, rxc->rxcr1); + } + + mutex_unlock(&ks->lock); + + if (status & IRQ_TXI) + netif_wake_queue(ks->netdev); + + enable_irq(ks->netdev->irq); +} + +/** + * calc_txlen - calculate size of message to send packet + * @len: Lenght of data + * + * Returns the size of the TXFIFO message needed to send + * this packet. + */ +static inline unsigned calc_txlen(unsigned len) +{ + return ALIGN(len + 4, 4); +} + +/** + * ks8851_wrpkt - write packet to TX FIFO + * @ks: The device state. + * @txp: The sk_buff to transmit. + * @irq: IRQ on completion of the packet. + * + * Send the @txp to the chip. This means creating the relevant packet header + * specifying the length of the packet and the other information the chip + * needs, such as IRQ on completion. Send the header and the packet data to + * the device. + */ +static void ks8851_wrpkt(struct ks8851_net *ks, struct sk_buff *txp, bool irq) +{ + struct spi_transfer *xfer = ks->spi_xfer2; + struct spi_message *msg = &ks->spi_msg2; + unsigned fid = 0; + int ret; + + if (netif_msg_tx_queued(ks)) + dev_dbg(&ks->spidev->dev, "%s: skb %p, %d@%p, irq %d\n", + __func__, txp, txp->len, txp->data, irq); + + fid = ks->fid++; + fid &= TXFR_TXFID_MASK; + + if (irq) + fid |= TXFR_TXIC; /* irq on completion */ + + /* start header at txb[1] to align txw entries */ + ks->txh.txb[1] = KS_SPIOP_TXFIFO; + ks->txh.txw[1] = cpu_to_le16(fid); + ks->txh.txw[2] = cpu_to_le16(txp->len); + + xfer->tx_buf = &ks->txh.txb[1]; + xfer->rx_buf = NULL; + xfer->len = 5; + + xfer++; + xfer->tx_buf = txp->data; + xfer->rx_buf = NULL; + xfer->len = ALIGN(txp->len, 4); + + ret = spi_sync(ks->spidev, msg); + if (ret < 0) + ks_err(ks, "%s: spi_sync() failed\n", __func__); +} + +/** + * ks8851_done_tx - update and then free skbuff after transmitting + * @ks: The device state + * @txb: The buffer transmitted + */ +static void ks8851_done_tx(struct ks8851_net *ks, struct sk_buff *txb) +{ + struct net_device *dev = ks->netdev; + + dev->stats.tx_bytes += txb->len; + dev->stats.tx_packets++; + + dev_kfree_skb(txb); +} + +/** + * ks8851_tx_work - process tx packet(s) + * @work: The work strucutre what was scheduled. + * + * This is called when a number of packets have been scheduled for + * transmission and need to be sent to the device. + */ +static void ks8851_tx_work(struct work_struct *work) +{ + struct ks8851_net *ks = container_of(work, struct ks8851_net, tx_work); + struct sk_buff *txb; + bool last = false; + + mutex_lock(&ks->lock); + + while (!last) { + txb = skb_dequeue(&ks->txq); + last = skb_queue_empty(&ks->txq); + + ks8851_wrreg16(ks, KS_RXQCR, ks->rc_rxqcr | RXQCR_SDA); + ks8851_wrpkt(ks, txb, last); + ks8851_wrreg16(ks, KS_RXQCR, ks->rc_rxqcr); + ks8851_wrreg16(ks, KS_TXQCR, TXQCR_METFE); + + ks8851_done_tx(ks, txb); + } + + mutex_unlock(&ks->lock); +} + +/** + * ks8851_set_powermode - set power mode of the device + * @ks: The device state + * @pwrmode: The power mode value to write to KS_PMECR. + * + * Change the power mode of the chip. + */ +static void ks8851_set_powermode(struct ks8851_net *ks, unsigned pwrmode) +{ + unsigned pmecr; + + if (netif_msg_hw(ks)) + ks_dbg(ks, "setting power mode %d\n", pwrmode); + + pmecr = ks8851_rdreg16(ks, KS_PMECR); + pmecr &= ~PMECR_PM_MASK; + pmecr |= pwrmode; + + ks8851_wrreg16(ks, KS_PMECR, pmecr); +} + +/** + * ks8851_net_open - open network device + * @dev: The network device being opened. + * + * Called when the network device is marked active, such as a user executing + * 'ifconfig up' on the device. + */ +static int ks8851_net_open(struct net_device *dev) +{ + struct ks8851_net *ks = netdev_priv(dev); + + /* lock the card, even if we may not actually be doing anything + * else at the moment */ + mutex_lock(&ks->lock); + + if (netif_msg_ifup(ks)) + ks_dbg(ks, "opening %s\n", dev->name); + + /* bring chip out of any power saving mode it was in */ + ks8851_set_powermode(ks, PMECR_PM_NORMAL); + + /* issue a soft reset to the RX/TX QMU to put it into a known + * state. */ + ks8851_soft_reset(ks, GRR_QMU); + + /* setup transmission parameters */ + + ks8851_wrreg16(ks, KS_TXCR, (TXCR_TXE | /* enable transmit process */ + TXCR_TXPE | /* pad to min length */ + TXCR_TXCRC | /* add CRC */ + TXCR_TXFCE)); /* enable flow control */ + + /* auto-increment tx data, reset tx pointer */ + ks8851_wrreg16(ks, KS_TXFDPR, TXFDPR_TXFPAI); + + /* setup receiver control */ + + ks8851_wrreg16(ks, KS_RXCR1, (RXCR1_RXPAFMA | /* from mac filter */ + RXCR1_RXFCE | /* enable flow control */ + RXCR1_RXBE | /* broadcast enable */ + RXCR1_RXUE | /* unicast enable */ + RXCR1_RXE)); /* enable rx block */ + + /* transfer entire frames out in one go */ + ks8851_wrreg16(ks, KS_RXCR2, RXCR2_SRDBL_FRAME); + + /* set receive counter timeouts */ + ks8851_wrreg16(ks, KS_RXDTTR, 1000); /* 1ms after first frame to IRQ */ + ks8851_wrreg16(ks, KS_RXDBCTR, 4096); /* >4Kbytes in buffer to IRQ */ + ks8851_wrreg16(ks, KS_RXFCTR, 10); /* 10 frames to IRQ */ + + ks->rc_rxqcr = (RXQCR_RXFCTE | /* IRQ on frame count exceeded */ + RXQCR_RXDBCTE | /* IRQ on byte count exceeded */ + RXQCR_RXDTTE); /* IRQ on time exceeded */ + + ks8851_wrreg16(ks, KS_RXQCR, ks->rc_rxqcr); + + /* clear then enable interrupts */ + +#define STD_IRQ (IRQ_LCI | /* Link Change */ \ + IRQ_TXI | /* TX done */ \ + IRQ_RXI | /* RX done */ \ + IRQ_SPIBEI | /* SPI bus error */ \ + IRQ_TXPSI | /* TX process stop */ \ + IRQ_RXPSI) /* RX process stop */ + + ks->rc_ier = STD_IRQ; + ks8851_wrreg16(ks, KS_ISR, STD_IRQ); + ks8851_wrreg16(ks, KS_IER, STD_IRQ); + + netif_start_queue(ks->netdev); + + if (netif_msg_ifup(ks)) + ks_dbg(ks, "network device %s up\n", dev->name); + + mutex_unlock(&ks->lock); + return 0; +} + +/** + * ks8851_net_stop - close network device + * @dev: The device being closed. + * + * Called to close down a network device which has been active. Cancell any + * work, shutdown the RX and TX process and then place the chip into a low + * power state whilst it is not being used. + */ +static int ks8851_net_stop(struct net_device *dev) +{ + struct ks8851_net *ks = netdev_priv(dev); + + if (netif_msg_ifdown(ks)) + ks_info(ks, "%s: shutting down\n", dev->name); + + netif_stop_queue(dev); + + mutex_lock(&ks->lock); + + /* stop any outstanding work */ + flush_work(&ks->irq_work); + flush_work(&ks->tx_work); + flush_work(&ks->rxctrl_work); + + /* turn off the IRQs and ack any outstanding */ + ks8851_wrreg16(ks, KS_IER, 0x0000); + ks8851_wrreg16(ks, KS_ISR, 0xffff); + + /* shutdown RX process */ + ks8851_wrreg16(ks, KS_RXCR1, 0x0000); + + /* shutdown TX process */ + ks8851_wrreg16(ks, KS_TXCR, 0x0000); + + /* set powermode to soft power down to save power */ + ks8851_set_powermode(ks, PMECR_PM_SOFTDOWN); + + /* ensure any queued tx buffers are dumped */ + while (!skb_queue_empty(&ks->txq)) { + struct sk_buff *txb = skb_dequeue(&ks->txq); + + if (netif_msg_ifdown(ks)) + ks_dbg(ks, "%s: freeing txb %p\n", __func__, txb); + + dev_kfree_skb(txb); + } + + mutex_unlock(&ks->lock); + return 0; +} + +/** + * ks8851_start_xmit - transmit packet + * @skb: The buffer to transmit + * @dev: The device used to transmit the packet. + * + * Called by the network layer to transmit the @skb. Queue the packet for + * the device and schedule the necessary work to transmit the packet when + * it is free. + * + * We do this to firstly avoid sleeping with the network device locked, + * and secondly so we can round up more than one packet to transmit which + * means we can try and avoid generating too many transmit done interrupts. + */ +static int ks8851_start_xmit(struct sk_buff *skb, struct net_device *dev) +{ + struct ks8851_net *ks = netdev_priv(dev); + unsigned needed = calc_txlen(skb->len); + int ret = NETDEV_TX_OK; + + if (netif_msg_tx_queued(ks)) + ks_dbg(ks, "%s: skb %p, %d@%p\n", __func__, + skb, skb->len, skb->data); + + spin_lock(&ks->statelock); + + if (needed > ks->tx_space) { + netif_stop_queue(dev); + ret = NETDEV_TX_BUSY; + } else { + ks->tx_space -= needed; + skb_queue_tail(&ks->txq, skb); + } + + spin_unlock(&ks->statelock); + schedule_work(&ks->tx_work); + + return ret; +} + +/** + * ks8851_rxctrl_work - work handler to change rx mode + * @work: The work structure this belongs to. + * + * Lock the device and issue the necessary changes to the receive mode from + * the network device layer. This is done so that we can do this without + * having to sleep whilst holding the network device lock. + * + * Since the recommendation from Micrel is that the RXQ is shutdown whilst the + * receive parameters are programmed, we issue a write to disable the RXQ and + * then wait for the interrupt handler to be triggered once the RXQ shutdown is + * complete. The interrupt handler then writes the new values into the chip. + */ +static void ks8851_rxctrl_work(struct work_struct *work) +{ + struct ks8851_net *ks = container_of(work, struct ks8851_net, rxctrl_work); + + mutex_lock(&ks->lock); + + /* need to shutdown RXQ before modifying filter parameters */ + ks8851_wrreg16(ks, KS_RXCR1, 0x00); + + mutex_unlock(&ks->lock); +} + +static void ks8851_set_rx_mode(struct net_device *dev) +{ + struct ks8851_net *ks = netdev_priv(dev); + struct ks8851_rxctrl rxctrl; + + memset(&rxctrl, 0, sizeof(rxctrl)); + + if (dev->flags & IFF_PROMISC) { + /* interface to receive everything */ + + rxctrl.rxcr1 = RXCR1_RXAE | RXCR1_RXINVF; + } else if (dev->flags & IFF_ALLMULTI) { + /* accept all multicast packets */ + + rxctrl.rxcr1 = (RXCR1_RXME | RXCR1_RXAE | + RXCR1_RXPAFMA | RXCR1_RXMAFMA); + } else if (dev->flags & IFF_MULTICAST && dev->mc_count > 0) { + struct dev_mc_list *mcptr = dev->mc_list; + u32 crc; + int i; + + /* accept some multicast */ + + for (i = dev->mc_count; i > 0; i--) { + crc = ether_crc(ETH_ALEN, mcptr->dmi_addr); + crc >>= (32 - 6); /* get top six bits */ + + rxctrl.mchash[crc >> 4] |= (1 << (crc & 0xf)); + mcptr = mcptr->next; + } + + rxctrl.rxcr1 = RXCR1_RXME | RXCR1_RXAE | RXCR1_RXPAFMA; + } else { + /* just accept broadcast / unicast */ + rxctrl.rxcr1 = RXCR1_RXPAFMA; + } + + rxctrl.rxcr1 |= (RXCR1_RXUE | /* unicast enable */ + RXCR1_RXBE | /* broadcast enable */ + RXCR1_RXE | /* RX process enable */ + RXCR1_RXFCE); /* enable flow control */ + + rxctrl.rxcr2 |= RXCR2_SRDBL_FRAME; + + /* schedule work to do the actual set of the data if needed */ + + spin_lock(&ks->statelock); + + if (memcmp(&rxctrl, &ks->rxctrl, sizeof(rxctrl)) != 0) { + memcpy(&ks->rxctrl, &rxctrl, sizeof(ks->rxctrl)); + schedule_work(&ks->rxctrl_work); + } + + spin_unlock(&ks->statelock); +} + +static int ks8851_set_mac_address(struct net_device *dev, void *addr) +{ + struct sockaddr *sa = addr; + + if (netif_running(dev)) + return -EBUSY; + + if (!is_valid_ether_addr(sa->sa_data)) + return -EADDRNOTAVAIL; + + memcpy(dev->dev_addr, sa->sa_data, ETH_ALEN); + return ks8851_write_mac_addr(dev); +} + +static int ks8851_net_ioctl(struct net_device *dev, struct ifreq *req, int cmd) +{ + struct ks8851_net *ks = netdev_priv(dev); + + if (!netif_running(dev)) + return -EINVAL; + + return generic_mii_ioctl(&ks->mii, if_mii(req), cmd, NULL); +} + +static const struct net_device_ops ks8851_netdev_ops = { + .ndo_open = ks8851_net_open, + .ndo_stop = ks8851_net_stop, + .ndo_do_ioctl = ks8851_net_ioctl, + .ndo_start_xmit = ks8851_start_xmit, + .ndo_set_mac_address = ks8851_set_mac_address, + .ndo_set_rx_mode = ks8851_set_rx_mode, + .ndo_change_mtu = eth_change_mtu, + .ndo_validate_addr = eth_validate_addr, +}; + +/* ethtool support */ + +static void ks8851_get_drvinfo(struct net_device *dev, + struct ethtool_drvinfo *di) +{ + strlcpy(di->driver, "KS8851", sizeof(di->driver)); + strlcpy(di->version, "1.00", sizeof(di->version)); + strlcpy(di->bus_info, dev_name(dev->dev.parent), sizeof(di->bus_info)); +} + +static u32 ks8851_get_msglevel(struct net_device *dev) +{ + struct ks8851_net *ks = netdev_priv(dev); + return ks->msg_enable; +} + +static void ks8851_set_msglevel(struct net_device *dev, u32 to) +{ + struct ks8851_net *ks = netdev_priv(dev); + ks->msg_enable = to; +} + +static int ks8851_get_settings(struct net_device *dev, struct ethtool_cmd *cmd) +{ + struct ks8851_net *ks = netdev_priv(dev); + return mii_ethtool_gset(&ks->mii, cmd); +} + +static int ks8851_set_settings(struct net_device *dev, struct ethtool_cmd *cmd) +{ + struct ks8851_net *ks = netdev_priv(dev); + return mii_ethtool_sset(&ks->mii, cmd); +} + +static u32 ks8851_get_link(struct net_device *dev) +{ + struct ks8851_net *ks = netdev_priv(dev); + return mii_link_ok(&ks->mii); +} + +static int ks8851_nway_reset(struct net_device *dev) +{ + struct ks8851_net *ks = netdev_priv(dev); + return mii_nway_restart(&ks->mii); +} + +static const struct ethtool_ops ks8851_ethtool_ops = { + .get_drvinfo = ks8851_get_drvinfo, + .get_msglevel = ks8851_get_msglevel, + .set_msglevel = ks8851_set_msglevel, + .get_settings = ks8851_get_settings, + .set_settings = ks8851_set_settings, + .get_link = ks8851_get_link, + .nway_reset = ks8851_nway_reset, +}; + +/* MII interface controls */ + +/** + * ks8851_phy_reg - convert MII register into a KS8851 register + * @reg: MII register number. + * + * Return the KS8851 register number for the corresponding MII PHY register + * if possible. Return zero if the MII register has no direct mapping to the + * KS8851 register set. + */ +static int ks8851_phy_reg(int reg) +{ + switch (reg) { + case MII_BMCR: + return KS_P1MBCR; + case MII_BMSR: + return KS_P1MBSR; + case MII_PHYSID1: + return KS_PHY1ILR; + case MII_PHYSID2: + return KS_PHY1IHR; + case MII_ADVERTISE: + return KS_P1ANAR; + case MII_LPA: + return KS_P1ANLPR; + } + + return 0x0; +} + +/** + * ks8851_phy_read - MII interface PHY register read. + * @dev: The network device the PHY is on. + * @phy_addr: Address of PHY (ignored as we only have one) + * @reg: The register to read. + * + * This call reads data from the PHY register specified in @reg. Since the + * device does not support all the MII registers, the non-existant values + * are always returned as zero. + * + * We return zero for unsupported registers as the MII code does not check + * the value returned for any error status, and simply returns it to the + * caller. The mii-tool that the driver was tested with takes any -ve error + * as real PHY capabilities, thus displaying incorrect data to the user. + */ +static int ks8851_phy_read(struct net_device *dev, int phy_addr, int reg) +{ + struct ks8851_net *ks = netdev_priv(dev); + int ksreg; + int result; + + ksreg = ks8851_phy_reg(reg); + if (!ksreg) + return 0x0; /* no error return allowed, so use zero */ + + mutex_lock(&ks->lock); + result = ks8851_rdreg16(ks, ksreg); + mutex_unlock(&ks->lock); + + return result; +} + +static void ks8851_phy_write(struct net_device *dev, + int phy, int reg, int value) +{ + struct ks8851_net *ks = netdev_priv(dev); + int ksreg; + + ksreg = ks8851_phy_reg(reg); + if (ksreg) { + mutex_lock(&ks->lock); + ks8851_wrreg16(ks, ksreg, value); + mutex_unlock(&ks->lock); + } +} + +/** + * ks8851_read_selftest - read the selftest memory info. + * @ks: The device state + * + * Read and check the TX/RX memory selftest information. + */ +static int ks8851_read_selftest(struct ks8851_net *ks) +{ + unsigned both_done = MBIR_TXMBF | MBIR_RXMBF; + int ret = 0; + unsigned rd; + + rd = ks8851_rdreg16(ks, KS_MBIR); + + if ((rd & both_done) != both_done) { + ks_warn(ks, "Memory selftest not finished\n"); + return 0; + } + + if (rd & MBIR_TXMBFA) { + ks_err(ks, "TX memory selftest fail\n"); + ret |= 1; + } + + if (rd & MBIR_RXMBFA) { + ks_err(ks, "RX memory selftest fail\n"); + ret |= 2; + } + + return 0; +} + +/* driver bus management functions */ + +static int __devinit ks8851_probe(struct spi_device *spi) +{ + struct net_device *ndev; + struct ks8851_net *ks; + int ret; + + ndev = alloc_etherdev(sizeof(struct ks8851_net)); + if (!ndev) { + dev_err(&spi->dev, "failed to alloc ethernet device\n"); + return -ENOMEM; + } + + spi->bits_per_word = 8; + + ks = netdev_priv(ndev); + + ks->netdev = ndev; + ks->spidev = spi; + ks->tx_space = 6144; + + mutex_init(&ks->lock); + spin_lock_init(&ks->statelock); + + INIT_WORK(&ks->tx_work, ks8851_tx_work); + INIT_WORK(&ks->irq_work, ks8851_irq_work); + INIT_WORK(&ks->rxctrl_work, ks8851_rxctrl_work); + + /* initialise pre-made spi transfer messages */ + + spi_message_init(&ks->spi_msg1); + spi_message_add_tail(&ks->spi_xfer1, &ks->spi_msg1); + + spi_message_init(&ks->spi_msg2); + spi_message_add_tail(&ks->spi_xfer2[0], &ks->spi_msg2); + spi_message_add_tail(&ks->spi_xfer2[1], &ks->spi_msg2); + + /* setup mii state */ + ks->mii.dev = ndev; + ks->mii.phy_id = 1, + ks->mii.phy_id_mask = 1; + ks->mii.reg_num_mask = 0xf; + ks->mii.mdio_read = ks8851_phy_read; + ks->mii.mdio_write = ks8851_phy_write; + + dev_info(&spi->dev, "message enable is %d\n", msg_enable); + + /* set the default message enable */ + ks->msg_enable = netif_msg_init(msg_enable, (NETIF_MSG_DRV | + NETIF_MSG_PROBE | + NETIF_MSG_LINK)); + + skb_queue_head_init(&ks->txq); + + SET_ETHTOOL_OPS(ndev, &ks8851_ethtool_ops); + SET_NETDEV_DEV(ndev, &spi->dev); + + dev_set_drvdata(&spi->dev, ks); + + ndev->if_port = IF_PORT_100BASET; + ndev->netdev_ops = &ks8851_netdev_ops; + ndev->irq = spi->irq; + + /* simple check for a valid chip being connected to the bus */ + + if ((ks8851_rdreg16(ks, KS_CIDER) & ~CIDER_REV_MASK) != CIDER_ID) { + dev_err(&spi->dev, "failed to read device ID\n"); + ret = -ENODEV; + goto err_id; + } + + ks8851_read_selftest(ks); + ks8851_init_mac(ks); + + ret = request_irq(spi->irq, ks8851_irq, IRQF_TRIGGER_LOW, + ndev->name, ks); + if (ret < 0) { + dev_err(&spi->dev, "failed to get irq\n"); + goto err_irq; + } + + ret = register_netdev(ndev); + if (ret) { + dev_err(&spi->dev, "failed to register network device\n"); + goto err_netdev; + } + + dev_info(&spi->dev, "revision %d, MAC %pM, IRQ %d\n", + CIDER_REV_GET(ks8851_rdreg16(ks, KS_CIDER)), + ndev->dev_addr, ndev->irq); + + return 0; + + +err_netdev: + free_irq(ndev->irq, ndev); + +err_id: +err_irq: + free_netdev(ndev); + return ret; +} + +static int __devexit ks8851_remove(struct spi_device *spi) +{ + struct ks8851_net *priv = dev_get_drvdata(&spi->dev); + + if (netif_msg_drv(priv)) + dev_info(&spi->dev, "remove"); + + unregister_netdev(priv->netdev); + free_irq(spi->irq, priv); + free_netdev(priv->netdev); + + return 0; +} + +static struct spi_driver ks8851_driver = { + .driver = { + .name = "ks8851", + .owner = THIS_MODULE, + }, + .probe = ks8851_probe, + .remove = __devexit_p(ks8851_remove), +}; + +static int __init ks8851_init(void) +{ + return spi_register_driver(&ks8851_driver); +} + +static void __exit ks8851_exit(void) +{ + spi_unregister_driver(&ks8851_driver); +} + +module_init(ks8851_init); +module_exit(ks8851_exit); + +MODULE_DESCRIPTION("KS8851 Network driver"); +MODULE_AUTHOR("Ben Dooks "); +MODULE_LICENSE("GPL"); + +module_param_named(message, msg_enable, int, 0); +MODULE_PARM_DESC(message, "Message verbosity level (0=none, 31=all)"); diff --git a/drivers/net/ks8851.h b/drivers/net/ks8851.h new file mode 100644 index 00000000000..85abe147afb --- /dev/null +++ b/drivers/net/ks8851.h @@ -0,0 +1,296 @@ +/* drivers/net/ks8851.h + * + * Copyright 2009 Simtec Electronics + * Ben Dooks + * + * KS8851 register definitions + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#define KS_CCR 0x08 +#define CCR_EEPROM (1 << 9) +#define CCR_SPI (1 << 8) +#define CCR_32PIN (1 << 0) + +/* MAC address registers */ +#define KS_MARL 0x10 +#define KS_MARM 0x12 +#define KS_MARH 0x14 + +#define KS_OBCR 0x20 +#define OBCR_ODS_16mA (1 << 6) + +#define KS_EEPCR 0x22 +#define EEPCR_EESA (1 << 4) +#define EEPCR_EESB (1 << 3) +#define EEPCR_EEDO (1 << 2) +#define EEPCR_EESCK (1 << 1) +#define EEPCR_EECS (1 << 0) + +#define KS_MBIR 0x24 +#define MBIR_TXMBF (1 << 12) +#define MBIR_TXMBFA (1 << 11) +#define MBIR_RXMBF (1 << 4) +#define MBIR_RXMBFA (1 << 3) + +#define KS_GRR 0x26 +#define GRR_QMU (1 << 1) +#define GRR_GSR (1 << 0) + +#define KS_WFCR 0x2A +#define WFCR_MPRXE (1 << 7) +#define WFCR_WF3E (1 << 3) +#define WFCR_WF2E (1 << 2) +#define WFCR_WF1E (1 << 1) +#define WFCR_WF0E (1 << 0) + +#define KS_WF0CRC0 0x30 +#define KS_WF0CRC1 0x32 +#define KS_WF0BM0 0x34 +#define KS_WF0BM1 0x36 +#define KS_WF0BM2 0x38 +#define KS_WF0BM3 0x3A + +#define KS_WF1CRC0 0x40 +#define KS_WF1CRC1 0x42 +#define KS_WF1BM0 0x44 +#define KS_WF1BM1 0x46 +#define KS_WF1BM2 0x48 +#define KS_WF1BM3 0x4A + +#define KS_WF2CRC0 0x50 +#define KS_WF2CRC1 0x52 +#define KS_WF2BM0 0x54 +#define KS_WF2BM1 0x56 +#define KS_WF2BM2 0x58 +#define KS_WF2BM3 0x5A + +#define KS_WF3CRC0 0x60 +#define KS_WF3CRC1 0x62 +#define KS_WF3BM0 0x64 +#define KS_WF3BM1 0x66 +#define KS_WF3BM2 0x68 +#define KS_WF3BM3 0x6A + +#define KS_TXCR 0x70 +#define TXCR_TCGICMP (1 << 8) +#define TXCR_TCGUDP (1 << 7) +#define TXCR_TCGTCP (1 << 6) +#define TXCR_TCGIP (1 << 5) +#define TXCR_FTXQ (1 << 4) +#define TXCR_TXFCE (1 << 3) +#define TXCR_TXPE (1 << 2) +#define TXCR_TXCRC (1 << 1) +#define TXCR_TXE (1 << 0) + +#define KS_TXSR 0x72 +#define TXSR_TXLC (1 << 13) +#define TXSR_TXMC (1 << 12) +#define TXSR_TXFID_MASK (0x3f << 0) +#define TXSR_TXFID_SHIFT (0) +#define TXSR_TXFID_GET(_v) (((_v) >> 0) & 0x3f) + +#define KS_RXCR1 0x74 +#define RXCR1_FRXQ (1 << 15) +#define RXCR1_RXUDPFCC (1 << 14) +#define RXCR1_RXTCPFCC (1 << 13) +#define RXCR1_RXIPFCC (1 << 12) +#define RXCR1_RXPAFMA (1 << 11) +#define RXCR1_RXFCE (1 << 10) +#define RXCR1_RXEFE (1 << 9) +#define RXCR1_RXMAFMA (1 << 8) +#define RXCR1_RXBE (1 << 7) +#define RXCR1_RXME (1 << 6) +#define RXCR1_RXUE (1 << 5) +#define RXCR1_RXAE (1 << 4) +#define RXCR1_RXINVF (1 << 1) +#define RXCR1_RXE (1 << 0) + +#define KS_RXCR2 0x76 +#define RXCR2_SRDBL_MASK (0x7 << 5) +#define RXCR2_SRDBL_SHIFT (5) +#define RXCR2_SRDBL_4B (0x0 << 5) +#define RXCR2_SRDBL_8B (0x1 << 5) +#define RXCR2_SRDBL_16B (0x2 << 5) +#define RXCR2_SRDBL_32B (0x3 << 5) +#define RXCR2_SRDBL_FRAME (0x4 << 5) +#define RXCR2_IUFFP (1 << 4) +#define RXCR2_RXIUFCEZ (1 << 3) +#define RXCR2_UDPLFE (1 << 2) +#define RXCR2_RXICMPFCC (1 << 1) +#define RXCR2_RXSAF (1 << 0) + +#define KS_TXMIR 0x78 + +#define KS_RXFHSR 0x7C +#define RXFSHR_RXFV (1 << 15) +#define RXFSHR_RXICMPFCS (1 << 13) +#define RXFSHR_RXIPFCS (1 << 12) +#define RXFSHR_RXTCPFCS (1 << 11) +#define RXFSHR_RXUDPFCS (1 << 10) +#define RXFSHR_RXBF (1 << 7) +#define RXFSHR_RXMF (1 << 6) +#define RXFSHR_RXUF (1 << 5) +#define RXFSHR_RXMR (1 << 4) +#define RXFSHR_RXFT (1 << 3) +#define RXFSHR_RXFTL (1 << 2) +#define RXFSHR_RXRF (1 << 1) +#define RXFSHR_RXCE (1 << 0) + +#define KS_RXFHBCR 0x7E +#define KS_TXQCR 0x80 +#define TXQCR_AETFE (1 << 2) +#define TXQCR_TXQMAM (1 << 1) +#define TXQCR_METFE (1 << 0) + +#define KS_RXQCR 0x82 +#define RXQCR_RXDTTS (1 << 12) +#define RXQCR_RXDBCTS (1 << 11) +#define RXQCR_RXFCTS (1 << 10) +#define RXQCR_RXIPHTOE (1 << 9) +#define RXQCR_RXDTTE (1 << 7) +#define RXQCR_RXDBCTE (1 << 6) +#define RXQCR_RXFCTE (1 << 5) +#define RXQCR_ADRFE (1 << 4) +#define RXQCR_SDA (1 << 3) +#define RXQCR_RRXEF (1 << 0) + +#define KS_TXFDPR 0x84 +#define TXFDPR_TXFPAI (1 << 14) +#define TXFDPR_TXFP_MASK (0x7ff << 0) +#define TXFDPR_TXFP_SHIFT (0) + +#define KS_RXFDPR 0x86 +#define RXFDPR_RXFPAI (1 << 14) + +#define KS_RXDTTR 0x8C +#define KS_RXDBCTR 0x8E + +#define KS_IER 0x90 +#define KS_ISR 0x92 +#define IRQ_LCI (1 << 15) +#define IRQ_TXI (1 << 14) +#define IRQ_RXI (1 << 13) +#define IRQ_RXOI (1 << 11) +#define IRQ_TXPSI (1 << 9) +#define IRQ_RXPSI (1 << 8) +#define IRQ_TXSAI (1 << 6) +#define IRQ_RXWFDI (1 << 5) +#define IRQ_RXMPDI (1 << 4) +#define IRQ_LDI (1 << 3) +#define IRQ_EDI (1 << 2) +#define IRQ_SPIBEI (1 << 1) +#define IRQ_DEDI (1 << 0) + +#define KS_RXFCTR 0x9C +#define KS_RXFC 0x9D +#define RXFCTR_RXFC_MASK (0xff << 8) +#define RXFCTR_RXFC_SHIFT (8) +#define RXFCTR_RXFC_GET(_v) (((_v) >> 8) & 0xff) +#define RXFCTR_RXFCT_MASK (0xff << 0) +#define RXFCTR_RXFCT_SHIFT (0) + +#define KS_TXNTFSR 0x9E + +#define KS_MAHTR0 0xA0 +#define KS_MAHTR1 0xA2 +#define KS_MAHTR2 0xA4 +#define KS_MAHTR3 0xA6 + +#define KS_FCLWR 0xB0 +#define KS_FCHWR 0xB2 +#define KS_FCOWR 0xB4 + +#define KS_CIDER 0xC0 +#define CIDER_ID 0x8870 +#define CIDER_REV_MASK (0x7 << 1) +#define CIDER_REV_SHIFT (1) +#define CIDER_REV_GET(_v) (((_v) >> 1) & 0x7) + +#define KS_CGCR 0xC6 + +#define KS_IACR 0xC8 +#define IACR_RDEN (1 << 12) +#define IACR_TSEL_MASK (0x3 << 10) +#define IACR_TSEL_SHIFT (10) +#define IACR_TSEL_MIB (0x3 << 10) +#define IACR_ADDR_MASK (0x1f << 0) +#define IACR_ADDR_SHIFT (0) + +#define KS_IADLR 0xD0 +#define KS_IAHDR 0xD2 + +#define KS_PMECR 0xD4 +#define PMECR_PME_DELAY (1 << 14) +#define PMECR_PME_POL (1 << 12) +#define PMECR_WOL_WAKEUP (1 << 11) +#define PMECR_WOL_MAGICPKT (1 << 10) +#define PMECR_WOL_LINKUP (1 << 9) +#define PMECR_WOL_ENERGY (1 << 8) +#define PMECR_AUTO_WAKE_EN (1 << 7) +#define PMECR_WAKEUP_NORMAL (1 << 6) +#define PMECR_WKEVT_MASK (0xf << 2) +#define PMECR_WKEVT_SHIFT (2) +#define PMECR_WKEVT_GET(_v) (((_v) >> 2) & 0xf) +#define PMECR_WKEVT_ENERGY (0x1 << 2) +#define PMECR_WKEVT_LINK (0x2 << 2) +#define PMECR_WKEVT_MAGICPKT (0x4 << 2) +#define PMECR_WKEVT_FRAME (0x8 << 2) +#define PMECR_PM_MASK (0x3 << 0) +#define PMECR_PM_SHIFT (0) +#define PMECR_PM_NORMAL (0x0 << 0) +#define PMECR_PM_ENERGY (0x1 << 0) +#define PMECR_PM_SOFTDOWN (0x2 << 0) +#define PMECR_PM_POWERSAVE (0x3 << 0) + +/* Standard MII PHY data */ +#define KS_P1MBCR 0xE4 +#define KS_P1MBSR 0xE6 +#define KS_PHY1ILR 0xE8 +#define KS_PHY1IHR 0xEA +#define KS_P1ANAR 0xEC +#define KS_P1ANLPR 0xEE + +#define KS_P1SCLMD 0xF4 +#define P1SCLMD_LEDOFF (1 << 15) +#define P1SCLMD_TXIDS (1 << 14) +#define P1SCLMD_RESTARTAN (1 << 13) +#define P1SCLMD_DISAUTOMDIX (1 << 10) +#define P1SCLMD_FORCEMDIX (1 << 9) +#define P1SCLMD_AUTONEGEN (1 << 7) +#define P1SCLMD_FORCE100 (1 << 6) +#define P1SCLMD_FORCEFDX (1 << 5) +#define P1SCLMD_ADV_FLOW (1 << 4) +#define P1SCLMD_ADV_100BT_FDX (1 << 3) +#define P1SCLMD_ADV_100BT_HDX (1 << 2) +#define P1SCLMD_ADV_10BT_FDX (1 << 1) +#define P1SCLMD_ADV_10BT_HDX (1 << 0) + +#define KS_P1CR 0xF6 +#define P1CR_HP_MDIX (1 << 15) +#define P1CR_REV_POL (1 << 13) +#define P1CR_OP_100M (1 << 10) +#define P1CR_OP_FDX (1 << 9) +#define P1CR_OP_MDI (1 << 7) +#define P1CR_AN_DONE (1 << 6) +#define P1CR_LINK_GOOD (1 << 5) +#define P1CR_PNTR_FLOW (1 << 4) +#define P1CR_PNTR_100BT_FDX (1 << 3) +#define P1CR_PNTR_100BT_HDX (1 << 2) +#define P1CR_PNTR_10BT_FDX (1 << 1) +#define P1CR_PNTR_10BT_HDX (1 << 0) + +/* TX Frame control */ + +#define TXFR_TXIC (1 << 15) +#define TXFR_TXFID_MASK (0x3f << 0) +#define TXFR_TXFID_SHIFT (0) + +/* SPI frame opcodes */ +#define KS_SPIOP_RD (0x00) +#define KS_SPIOP_WR (0x40) +#define KS_SPIOP_RXFIFO (0x80) +#define KS_SPIOP_TXFIFO (0xC0) -- cgit v1.2.3 From cf981ffb31e8f41f4899a56560f81322f94f22d1 Mon Sep 17 00:00:00 2001 From: Dhananjay Phadke Date: Fri, 17 Jul 2009 15:27:06 +0000 Subject: netxen: fix context deletion sequence o Use D3 reset context deletion for NX2031, it cleans up more resources in the firmware. o Release rx buffers after hardware context has been reset. o Delete tx context after rx context, some firmware control commands are sent on tx context, so it should be the last to go. Signed-off-by: Dhananjay Phadke Signed-off-by: David S. Miller --- drivers/net/netxen/netxen_nic.h | 1 + drivers/net/netxen/netxen_nic_ctx.c | 13 +++++++------ drivers/net/netxen/netxen_nic_main.c | 2 +- 3 files changed, 9 insertions(+), 7 deletions(-) diff --git a/drivers/net/netxen/netxen_nic.h b/drivers/net/netxen/netxen_nic.h index e1cdba752e0..9fa71faf4ce 100644 --- a/drivers/net/netxen/netxen_nic.h +++ b/drivers/net/netxen/netxen_nic.h @@ -210,6 +210,7 @@ #define NETXEN_CTX_SIGNATURE 0xdee0 #define NETXEN_CTX_SIGNATURE_V2 0x0002dee0 #define NETXEN_CTX_RESET 0xbad0 +#define NETXEN_CTX_D3_RESET 0xacc0 #define NETXEN_RCV_PRODUCER(ringid) (ringid) #define PHAN_PEG_RCV_INITIALIZED 0xff01 diff --git a/drivers/net/netxen/netxen_nic_ctx.c b/drivers/net/netxen/netxen_nic_ctx.c index 4754f5cffad..9f8ae4719e2 100644 --- a/drivers/net/netxen/netxen_nic_ctx.c +++ b/drivers/net/netxen/netxen_nic_ctx.c @@ -684,10 +684,8 @@ int netxen_alloc_hw_resources(struct netxen_adapter *adapter) goto err_out_free; } else { err = netxen_init_old_ctx(adapter); - if (err) { - netxen_free_hw_resources(adapter); - return err; - } + if (err) + goto err_out_free; } return 0; @@ -708,15 +706,18 @@ void netxen_free_hw_resources(struct netxen_adapter *adapter) int port = adapter->portnum; if (adapter->fw_major >= 4) { - nx_fw_cmd_destroy_tx_ctx(adapter); nx_fw_cmd_destroy_rx_ctx(adapter); + nx_fw_cmd_destroy_tx_ctx(adapter); } else { netxen_api_lock(adapter); NXWR32(adapter, CRB_CTX_SIGNATURE_REG(port), - NETXEN_CTX_RESET | port); + NETXEN_CTX_D3_RESET | port); netxen_api_unlock(adapter); } + /* Allow dma queues to drain after context reset */ + msleep(20); + recv_ctx = &adapter->recv_ctx; if (recv_ctx->hwctx != NULL) { diff --git a/drivers/net/netxen/netxen_nic_main.c b/drivers/net/netxen/netxen_nic_main.c index 27539ddf94c..9a7c4c8029d 100644 --- a/drivers/net/netxen/netxen_nic_main.c +++ b/drivers/net/netxen/netxen_nic_main.c @@ -943,8 +943,8 @@ err_out_free_sw: static void netxen_nic_detach(struct netxen_adapter *adapter) { - netxen_release_rx_buffers(adapter); netxen_free_hw_resources(adapter); + netxen_release_rx_buffers(adapter); netxen_nic_free_irq(adapter); netxen_free_sw_resources(adapter); -- cgit v1.2.3 From b2af9cb06d4de1b507ec0fd779ec2ecedee1480a Mon Sep 17 00:00:00 2001 From: Dhananjay Phadke Date: Fri, 17 Jul 2009 15:27:07 +0000 Subject: netxen: fix deadlock on dev close netxen: fix deadlock on dev close The tx ring accounting fix in commit cb2107be43d2fc5eadec58b92b ("netxen: fix tx ring accounting") introduced intermittent deadlock when inteface is going down. This was possibly combined effect of speculative tx pause, calling netif_tx_lock instead of queue lock and unclean synchronization with napi which could end up unmasking interrupt. Signed-off-by: Dhananjay Phadke Signed-off-by: David S. Miller --- drivers/net/netxen/netxen_nic.h | 2 ++ drivers/net/netxen/netxen_nic_hw.c | 9 +++++---- drivers/net/netxen/netxen_nic_init.c | 5 +++-- drivers/net/netxen/netxen_nic_main.c | 20 +++++++++++++------- 4 files changed, 23 insertions(+), 13 deletions(-) diff --git a/drivers/net/netxen/netxen_nic.h b/drivers/net/netxen/netxen_nic.h index 9fa71faf4ce..f86e05047d1 100644 --- a/drivers/net/netxen/netxen_nic.h +++ b/drivers/net/netxen/netxen_nic.h @@ -774,6 +774,8 @@ struct nx_host_tx_ring { u32 crb_cmd_consumer; u32 num_desc; + struct netdev_queue *txq; + struct netxen_cmd_buffer *cmd_buf_arr; struct cmd_desc_type0 *desc_head; dma_addr_t phys_addr; diff --git a/drivers/net/netxen/netxen_nic_hw.c b/drivers/net/netxen/netxen_nic_hw.c index ce3b89d2cbb..b9123d445c9 100644 --- a/drivers/net/netxen/netxen_nic_hw.c +++ b/drivers/net/netxen/netxen_nic_hw.c @@ -461,13 +461,14 @@ netxen_send_cmd_descs(struct netxen_adapter *adapter, i = 0; tx_ring = adapter->tx_ring; - netif_tx_lock_bh(adapter->netdev); + __netif_tx_lock_bh(tx_ring->txq); producer = tx_ring->producer; consumer = tx_ring->sw_consumer; - if (nr_desc >= find_diff_among(producer, consumer, tx_ring->num_desc)) { - netif_tx_unlock_bh(adapter->netdev); + if (nr_desc >= netxen_tx_avail(tx_ring)) { + netif_tx_stop_queue(tx_ring->txq); + __netif_tx_unlock_bh(tx_ring->txq); return -EBUSY; } @@ -490,7 +491,7 @@ netxen_send_cmd_descs(struct netxen_adapter *adapter, netxen_nic_update_cmd_producer(adapter, tx_ring); - netif_tx_unlock_bh(adapter->netdev); + __netif_tx_unlock_bh(tx_ring->txq); return 0; } diff --git a/drivers/net/netxen/netxen_nic_init.c b/drivers/net/netxen/netxen_nic_init.c index b899bd51fcd..5d3343ef3d8 100644 --- a/drivers/net/netxen/netxen_nic_init.c +++ b/drivers/net/netxen/netxen_nic_init.c @@ -214,6 +214,7 @@ int netxen_alloc_sw_resources(struct netxen_adapter *adapter) adapter->tx_ring = tx_ring; tx_ring->num_desc = adapter->num_txd; + tx_ring->txq = netdev_get_tx_queue(netdev, 0); cmd_buf_arr = vmalloc(TX_BUFF_RINGSIZE(tx_ring)); if (cmd_buf_arr == NULL) { @@ -1400,10 +1401,10 @@ int netxen_process_cmd_ring(struct netxen_adapter *adapter) smp_mb(); if (netif_queue_stopped(netdev) && netif_carrier_ok(netdev)) { - netif_tx_lock(netdev); + __netif_tx_lock(tx_ring->txq, smp_processor_id()); if (netxen_tx_avail(tx_ring) > TX_STOP_THRESH) netif_wake_queue(netdev); - netif_tx_unlock(netdev); + __netif_tx_unlock(tx_ring->txq); } } /* diff --git a/drivers/net/netxen/netxen_nic_main.c b/drivers/net/netxen/netxen_nic_main.c index 9a7c4c8029d..370c52f2776 100644 --- a/drivers/net/netxen/netxen_nic_main.c +++ b/drivers/net/netxen/netxen_nic_main.c @@ -215,9 +215,9 @@ netxen_napi_disable(struct netxen_adapter *adapter) for (ring = 0; ring < adapter->max_sds_rings; ring++) { sds_ring = &recv_ctx->sds_rings[ring]; - napi_disable(&sds_ring->napi); netxen_nic_disable_int(sds_ring); - synchronize_irq(sds_ring->irq); + napi_synchronize(&sds_ring->napi); + napi_disable(&sds_ring->napi); } } @@ -833,11 +833,11 @@ netxen_nic_up(struct netxen_adapter *adapter, struct net_device *netdev) adapter->ahw.linkup = 0; - netxen_napi_enable(adapter); - if (adapter->max_sds_rings > 1) netxen_config_rss(adapter, 1); + netxen_napi_enable(adapter); + if (adapter->capabilities & NX_FW_CAPABILITY_LINK_NOTIFICATION) netxen_linkevent_request(adapter, 1); else @@ -851,8 +851,9 @@ netxen_nic_up(struct netxen_adapter *adapter, struct net_device *netdev) static void netxen_nic_down(struct netxen_adapter *adapter, struct net_device *netdev) { + spin_lock(&adapter->tx_clean_lock); netif_carrier_off(netdev); - netif_stop_queue(netdev); + netif_tx_disable(netdev); if (adapter->stop_port) adapter->stop_port(adapter); @@ -863,9 +864,10 @@ netxen_nic_down(struct netxen_adapter *adapter, struct net_device *netdev) netxen_napi_disable(adapter); netxen_release_tx_buffers(adapter); + spin_unlock(&adapter->tx_clean_lock); - FLUSH_SCHEDULED_WORK(); del_timer_sync(&adapter->watchdog_timer); + FLUSH_SCHEDULED_WORK(); } @@ -1645,6 +1647,9 @@ static void netxen_tx_timeout_task(struct work_struct *work) struct netxen_adapter *adapter = container_of(work, struct netxen_adapter, tx_timeout_task); + if (!netif_running(adapter->netdev)) + return; + printk(KERN_ERR "%s %s: transmit timeout, resetting.\n", netxen_nic_driver_name, adapter->netdev->name); @@ -1757,7 +1762,8 @@ static int netxen_nic_poll(struct napi_struct *napi, int budget) if ((work_done < budget) && tx_complete) { napi_complete(&sds_ring->napi); - netxen_nic_enable_int(sds_ring); + if (netif_running(adapter->netdev)) + netxen_nic_enable_int(sds_ring); } return work_done; -- cgit v1.2.3 From e4135c2da11c337e3759f98727c4819ba2a849fa Mon Sep 17 00:00:00 2001 From: Dhananjay Phadke Date: Fri, 17 Jul 2009 15:27:08 +0000 Subject: netxen: fix thermal check and shutdown Check temperature for all PCI functions, that can allow graceful shutdown of all interfaces on the overheated card. Old code was only monitoring temperature for function 0 only. Signed-off-by: Dhananjay Phadke Signed-off-by: David S. Miller --- drivers/net/netxen/netxen_nic_main.c | 14 ++++++++------ 1 file changed, 8 insertions(+), 6 deletions(-) diff --git a/drivers/net/netxen/netxen_nic_main.c b/drivers/net/netxen/netxen_nic_main.c index 370c52f2776..637ac8b89ba 100644 --- a/drivers/net/netxen/netxen_nic_main.c +++ b/drivers/net/netxen/netxen_nic_main.c @@ -1535,10 +1535,12 @@ static int netxen_nic_check_temp(struct netxen_adapter *adapter) printk(KERN_ALERT "%s: Device temperature %d degrees C exceeds" " maximum allowed. Hardware has been shut down.\n", - netxen_nic_driver_name, temp_val); + netdev->name, temp_val); + + netif_device_detach(netdev); + netxen_nic_down(adapter, netdev); + netxen_nic_detach(adapter); - netif_carrier_off(netdev); - netif_stop_queue(netdev); rv = 1; } else if (temp_state == NX_TEMP_WARN) { if (adapter->temp == NX_TEMP_NORMAL) { @@ -1546,13 +1548,13 @@ static int netxen_nic_check_temp(struct netxen_adapter *adapter) "%s: Device temperature %d degrees C " "exceeds operating range." " Immediate action needed.\n", - netxen_nic_driver_name, temp_val); + netdev->name, temp_val); } } else { if (adapter->temp == NX_TEMP_WARN) { printk(KERN_INFO "%s: Device temperature is now %d degrees C" - " in normal range.\n", netxen_nic_driver_name, + " in normal range.\n", netdev->name, temp_val); } } @@ -1625,7 +1627,7 @@ void netxen_watchdog_task(struct work_struct *work) struct netxen_adapter *adapter = container_of(work, struct netxen_adapter, watchdog_task); - if ((adapter->portnum == 0) && netxen_nic_check_temp(adapter)) + if (netxen_nic_check_temp(adapter)) return; if (!adapter->has_link_events) -- cgit v1.2.3 From f249fb783092471a4808e5fc5bda071d2724810d Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?R=C3=A9mi=20Denis-Courmont?= Date: Mon, 20 Jul 2009 00:47:04 +0000 Subject: Fix error return for setsockopt(SO_TIMESTAMPING) MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit I guess it should be -EINVAL rather than EINVAL. I have not checked when the bug came in. Perhaps a candidate for -stable? Signed-off-by: Rémi Denis-Courmont Signed-off-by: David S. Miller --- net/core/sock.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/net/core/sock.c b/net/core/sock.c index d9eec153d53..bbb25be7ddf 100644 --- a/net/core/sock.c +++ b/net/core/sock.c @@ -631,7 +631,7 @@ set_rcvbuf: case SO_TIMESTAMPING: if (val & ~SOF_TIMESTAMPING_MASK) { - ret = EINVAL; + ret = -EINVAL; break; } sock_valbool_flag(sk, SOCK_TIMESTAMPING_TX_HARDWARE, -- cgit v1.2.3 From e445bb4ed677f8df0d4f8c1abc15c668bd182f28 Mon Sep 17 00:00:00 2001 From: Ken Kawasaki Date: Sun, 19 Jul 2009 13:08:12 +0000 Subject: 3c589_cs: re-initialize the multicast in the tc589_reset 3c589_cs: re-initialize the multicast in the tc589_reset, and spin_lock the set_multicast_list function. Signed-off-by: Ken Kawasaki Signed-off-by: David S. Miller --- drivers/net/pcmcia/3c589_cs.c | 21 ++++++++++++++------- 1 file changed, 14 insertions(+), 7 deletions(-) diff --git a/drivers/net/pcmcia/3c589_cs.c b/drivers/net/pcmcia/3c589_cs.c index ec7cf5ac4f0..690b9c76d34 100644 --- a/drivers/net/pcmcia/3c589_cs.c +++ b/drivers/net/pcmcia/3c589_cs.c @@ -156,6 +156,7 @@ static struct net_device_stats *el3_get_stats(struct net_device *dev); static int el3_rx(struct net_device *dev); static int el3_close(struct net_device *dev); static void el3_tx_timeout(struct net_device *dev); +static void set_rx_mode(struct net_device *dev); static void set_multicast_list(struct net_device *dev); static const struct ethtool_ops netdev_ethtool_ops; @@ -488,8 +489,7 @@ static void tc589_reset(struct net_device *dev) /* Switch to register set 1 for normal use. */ EL3WINDOW(1); - /* Accept b-cast and phys addr only. */ - outw(SetRxFilter | RxStation | RxBroadcast, ioaddr + EL3_CMD); + set_rx_mode(dev); outw(StatsEnable, ioaddr + EL3_CMD); /* Turn on statistics. */ outw(RxEnable, ioaddr + EL3_CMD); /* Enable the receiver. */ outw(TxEnable, ioaddr + EL3_CMD); /* Enable transmitter. */ @@ -700,7 +700,7 @@ static irqreturn_t el3_interrupt(int irq, void *dev_id) if (fifo_diag & 0x2000) { /* Rx underrun */ tc589_wait_for_completion(dev, RxReset); - set_multicast_list(dev); + set_rx_mode(dev); outw(RxEnable, ioaddr + EL3_CMD); } outw(AckIntr | AdapterFailure, ioaddr + EL3_CMD); @@ -905,14 +905,11 @@ static int el3_rx(struct net_device *dev) return 0; } -static void set_multicast_list(struct net_device *dev) +static void set_rx_mode(struct net_device *dev) { - struct el3_private *lp = netdev_priv(dev); - struct pcmcia_device *link = lp->p_dev; unsigned int ioaddr = dev->base_addr; u16 opts = SetRxFilter | RxStation | RxBroadcast; - if (!pcmcia_dev_present(link)) return; if (dev->flags & IFF_PROMISC) opts |= RxMulticast | RxProm; else if (dev->mc_count || (dev->flags & IFF_ALLMULTI)) @@ -920,6 +917,16 @@ static void set_multicast_list(struct net_device *dev) outw(opts, ioaddr + EL3_CMD); } +static void set_multicast_list(struct net_device *dev) +{ + struct el3_private *priv = netdev_priv(dev); + unsigned long flags; + + spin_lock_irqsave(&priv->lock, flags); + set_rx_mode(dev); + spin_unlock_irqrestore(&priv->lock, flags); +} + static int el3_close(struct net_device *dev) { struct el3_private *lp = netdev_priv(dev); -- cgit v1.2.3 From 90cb665937a2aab16d9aa60f22908195c16dcffd Mon Sep 17 00:00:00 2001 From: Cesar Eduardo Barros Date: Sun, 19 Jul 2009 08:03:32 +0000 Subject: New device ID for sc92031 [1088:2031] MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit rain_maker@root-forum.org wrote: > Hello cesar, > > In a recent thread in a german linux forum, a user reported his PIC > NIC not being recognized by the kernel. > > Fortunately he provided enough information and I was able to help him > and get the device working with the sc92031 driver. > > The device ID is [1088:2031] (Vendor is called "Microcomputer Systems > (M) Son"), here is the respective thread in "ubuntuusers.de" > > http://forum.ubuntuusers.de/topic/lankarte-unter-xubuntu-wird-nicht-erkannt/ > > (Although you might not speak german, the code provided will show > you, that the device is actually working with your driver). > > It would be nice, if you include this new device ID to the > sc92031-driver. > > Regards, > > Axel Köllhofer (aka Rain_Maker) Cc: rain_maker@root-forum.org Signed-off-by: Cesar Eduardo Barros Signed-off-by: David S. Miller --- drivers/net/sc92031.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/net/sc92031.c b/drivers/net/sc92031.c index 18821f217e1..e3156c97bb5 100644 --- a/drivers/net/sc92031.c +++ b/drivers/net/sc92031.c @@ -1593,6 +1593,7 @@ out: static struct pci_device_id sc92031_pci_device_id_table[] __devinitdata = { { PCI_DEVICE(PCI_VENDOR_ID_SILAN, 0x2031) }, { PCI_DEVICE(PCI_VENDOR_ID_SILAN, 0x8139) }, + { PCI_DEVICE(0x1088, 0x2031) }, { 0, } }; MODULE_DEVICE_TABLE(pci, sc92031_pci_device_id_table); -- cgit v1.2.3 From 90a98b2f3f3647fb17667768a348b2b219f2a9f7 Mon Sep 17 00:00:00 2001 From: Jeff Layton Date: Mon, 20 Jul 2009 13:40:52 -0400 Subject: cifs: free nativeFileSystem field before allocating a new one ...otherwise, we'll leak this memory if we have to reconnect (e.g. after network failure). Signed-off-by: Jeff Layton CC: Stable Signed-off-by: Steve French --- fs/cifs/connect.c | 1 + 1 file changed, 1 insertion(+) diff --git a/fs/cifs/connect.c b/fs/cifs/connect.c index e16d7592116..9bb5c875073 100644 --- a/fs/cifs/connect.c +++ b/fs/cifs/connect.c @@ -2726,6 +2726,7 @@ CIFSTCon(unsigned int xid, struct cifsSesInfo *ses, strncpy(tcon->treeName, tree, MAX_TREE_SIZE); /* mostly informational -- no need to fail on error here */ + kfree(tcon->nativeFileSystem); tcon->nativeFileSystem = cifs_strndup_from_ucs(bcc_ptr, bytes_left, is_unicode, nls_codepage); -- cgit v1.2.3 From e2372902d84af3443d421a984d812ec87eeb0758 Mon Sep 17 00:00:00 2001 From: Wolfgang Grandegger Date: Mon, 20 Jul 2009 04:06:39 +0000 Subject: can: sja1000: remove duplicated includes Remove duplicated #include('s) in drivers/net/can/sja1000/sja1000.c Signed-off-by: Huang Weiyi Signed-off-by: Wolfgang Grandegger Signed-off-by: David S. Miller --- drivers/net/can/sja1000/sja1000.c | 1 - 1 file changed, 1 deletion(-) diff --git a/drivers/net/can/sja1000/sja1000.c b/drivers/net/can/sja1000/sja1000.c index 571f133a8fe..08ebee79d8a 100644 --- a/drivers/net/can/sja1000/sja1000.c +++ b/drivers/net/can/sja1000/sja1000.c @@ -63,7 +63,6 @@ #include #include #include -#include #include "sja1000.h" -- cgit v1.2.3 From b3d0df7ca35018ebbc24fd102ed7021cf593ba74 Mon Sep 17 00:00:00 2001 From: Wolfgang Grandegger Date: Mon, 20 Jul 2009 04:06:40 +0000 Subject: can: restart device even if dev_alloc_skb() fails If dev_alloc_skb() failed in can_restart(), the device was left behind in the bus-off state. This patch restarts the device nevertheless. Signed-off-by: Kurt Van Dijck Signed-off-by: Wolfgang Grandegger Signed-off-by: David S. Miller --- drivers/net/can/dev.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/net/can/dev.c b/drivers/net/can/dev.c index 574daddc21b..06083c32869 100644 --- a/drivers/net/can/dev.c +++ b/drivers/net/can/dev.c @@ -346,7 +346,7 @@ void can_restart(unsigned long data) skb = dev_alloc_skb(sizeof(struct can_frame)); if (skb == NULL) { err = -ENOMEM; - goto out; + goto restart; } skb->dev = dev; skb->protocol = htons(ETH_P_CAN); @@ -361,13 +361,13 @@ void can_restart(unsigned long data) stats->rx_packets++; stats->rx_bytes += cf->can_dlc; +restart: dev_dbg(dev->dev.parent, "restarted\n"); priv->can_stats.restarts++; /* Now restart the device */ err = priv->do_set_mode(dev, CAN_MODE_START); -out: netif_carrier_on(dev); if (err) dev_err(dev->dev.parent, "Error %d during restart", err); -- cgit v1.2.3 From 1b0d92244ff2434a98272f6d2525da32fc230f19 Mon Sep 17 00:00:00 2001 From: Wolfgang Grandegger Date: Mon, 20 Jul 2009 04:06:41 +0000 Subject: can: switch carrier on if device was stopped while in bus-off state This patch fixes a problem when a device is stopped while in the bus-off state. Then the carrier remains off forever. Signed-off-by: Kurt Van Dijck Signed-off-by: Wolfgang Grandegger Signed-off-by: David S. Miller --- drivers/net/can/dev.c | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/drivers/net/can/dev.c b/drivers/net/can/dev.c index 06083c32869..9e4283aff82 100644 --- a/drivers/net/can/dev.c +++ b/drivers/net/can/dev.c @@ -473,6 +473,10 @@ int open_candev(struct net_device *dev) return -EINVAL; } + /* Switch carrier on if device was stopped while in bus-off state */ + if (!netif_carrier_ok(dev)) + netif_carrier_on(dev); + setup_timer(&priv->restart_timer, can_restart, (unsigned long)dev); return 0; -- cgit v1.2.3 From c46a7aec556ffdbdb7357db0b05904b176cb3375 Mon Sep 17 00:00:00 2001 From: Kay Sievers Date: Mon, 20 Jul 2009 16:04:55 +0100 Subject: vc: create vcs(a) devices for consoles The buffer for the consoles are unconditionally allocated at con_init() time, which miss the creation of the vcs(a) devices. Since 2.6.30 (commit 4995f8ef9d3aac72745e12419d7fbaa8d01b1d81, 'vcs: hook sysfs devices into object lifetime instead of "binding"' to be exact) these devices are no longer created at open() and removed on close(), but controlled by the lifetime of the buffers. Reported-by: Gerardo Exequiel Pozzi Tested-by: Gerardo Exequiel Pozzi Cc: stable@kernel.org Signed-off-by: Kay Sievers Signed-off-by: Alan Cox Signed-off-by: Linus Torvalds --- drivers/char/vc_screen.c | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/drivers/char/vc_screen.c b/drivers/char/vc_screen.c index d94d25c12aa..c1791a63d99 100644 --- a/drivers/char/vc_screen.c +++ b/drivers/char/vc_screen.c @@ -495,11 +495,15 @@ void vcs_remove_sysfs(int index) int __init vcs_init(void) { + unsigned int i; + if (register_chrdev(VCS_MAJOR, "vcs", &vcs_fops)) panic("unable to get major %d for vcs device", VCS_MAJOR); vc_class = class_create(THIS_MODULE, "vc"); device_create(vc_class, NULL, MKDEV(VCS_MAJOR, 0), NULL, "vcs"); device_create(vc_class, NULL, MKDEV(VCS_MAJOR, 128), NULL, "vcsa"); + for (i = 0; i < MIN_NR_CONSOLES; i++) + vcs_make_sysfs(i); return 0; } -- cgit v1.2.3 From 254702568da63ce6f5ad68e77d83b427da693654 Mon Sep 17 00:00:00 2001 From: Julia Lawall Date: Mon, 20 Jul 2009 16:05:07 +0100 Subject: specialix.c: convert nested spin_lock_irqsave to spin_lock If spin_lock_irqsave is called twice in a row with the same second argument, the interrupt state at the point of the second call overwrites the value saved by the first call. Indeed, the second call does not need to save the interrupt state, so it is changed to a simple spin_lock. The semantic match that finds this problem is as follows: (http://www.emn.fr/x-info/coccinelle/) // @@ expression lock1,lock2; expression flags; @@ *spin_lock_irqsave(lock1,flags) ... when != flags *spin_lock_irqsave(lock2,flags) // Signed-off-by: Julia Lawall Signed-off-by: Alan Cox Signed-off-by: Linus Torvalds --- drivers/char/specialix.c | 24 ++++++++++++------------ 1 file changed, 12 insertions(+), 12 deletions(-) diff --git a/drivers/char/specialix.c b/drivers/char/specialix.c index bfe4cdb2feb..268e17f9ec3 100644 --- a/drivers/char/specialix.c +++ b/drivers/char/specialix.c @@ -1809,10 +1809,10 @@ static int sx_tiocmset(struct tty_struct *tty, struct file *file, if (clear & TIOCM_DTR) port->MSVR &= ~MSVR_DTR; } - spin_lock_irqsave(&bp->lock, flags); + spin_lock(&bp->lock); sx_out(bp, CD186x_CAR, port_No(port)); sx_out(bp, CD186x_MSVR, port->MSVR); - spin_unlock_irqrestore(&bp->lock, flags); + spin_unlock(&bp->lock); spin_unlock_irqrestore(&port->lock, flags); func_exit(); return 0; @@ -1833,11 +1833,11 @@ static int sx_send_break(struct tty_struct *tty, int length) port->break_length = SPECIALIX_TPS / HZ * length; port->COR2 |= COR2_ETC; port->IER |= IER_TXRDY; - spin_lock_irqsave(&bp->lock, flags); + spin_lock(&bp->lock); sx_out(bp, CD186x_CAR, port_No(port)); sx_out(bp, CD186x_COR2, port->COR2); sx_out(bp, CD186x_IER, port->IER); - spin_unlock_irqrestore(&bp->lock, flags); + spin_unlock(&bp->lock); spin_unlock_irqrestore(&port->lock, flags); sx_wait_CCR(bp); spin_lock_irqsave(&bp->lock, flags); @@ -2023,9 +2023,9 @@ static void sx_unthrottle(struct tty_struct *tty) if (sx_crtscts(tty)) port->MSVR |= MSVR_DTR; /* Else clause: see remark in "sx_throttle"... */ - spin_lock_irqsave(&bp->lock, flags); + spin_lock(&bp->lock); sx_out(bp, CD186x_CAR, port_No(port)); - spin_unlock_irqrestore(&bp->lock, flags); + spin_unlock(&bp->lock); if (I_IXOFF(tty)) { spin_unlock_irqrestore(&port->lock, flags); sx_wait_CCR(bp); @@ -2035,9 +2035,9 @@ static void sx_unthrottle(struct tty_struct *tty) sx_wait_CCR(bp); spin_lock_irqsave(&port->lock, flags); } - spin_lock_irqsave(&bp->lock, flags); + spin_lock(&bp->lock); sx_out(bp, CD186x_MSVR, port->MSVR); - spin_unlock_irqrestore(&bp->lock, flags); + spin_unlock(&bp->lock); spin_unlock_irqrestore(&port->lock, flags); func_exit(); @@ -2061,10 +2061,10 @@ static void sx_stop(struct tty_struct *tty) spin_lock_irqsave(&port->lock, flags); port->IER &= ~IER_TXRDY; - spin_lock_irqsave(&bp->lock, flags); + spin_lock(&bp->lock); sx_out(bp, CD186x_CAR, port_No(port)); sx_out(bp, CD186x_IER, port->IER); - spin_unlock_irqrestore(&bp->lock, flags); + spin_unlock(&bp->lock); spin_unlock_irqrestore(&port->lock, flags); func_exit(); @@ -2089,10 +2089,10 @@ static void sx_start(struct tty_struct *tty) spin_lock_irqsave(&port->lock, flags); if (port->xmit_cnt && port->xmit_buf && !(port->IER & IER_TXRDY)) { port->IER |= IER_TXRDY; - spin_lock_irqsave(&bp->lock, flags); + spin_lock(&bp->lock); sx_out(bp, CD186x_CAR, port_No(port)); sx_out(bp, CD186x_IER, port->IER); - spin_unlock_irqrestore(&bp->lock, flags); + spin_unlock(&bp->lock); } spin_unlock_irqrestore(&port->lock, flags); -- cgit v1.2.3 From 23198fda7182969b619613a555f8645fdc3dc334 Mon Sep 17 00:00:00 2001 From: Alan Cox Date: Mon, 20 Jul 2009 16:05:27 +0100 Subject: tty: fix chars_in_buffers This function does not have an error return and returning an error is instead interpreted as having a lot of pending bytes. Reported by Jeff Harris who provided a list of some of the remaining offenders. Signed-off-by: Alan Cox Signed-off-by: Linus Torvalds --- drivers/char/hvc_console.c | 2 +- drivers/char/nozomi.c | 4 +--- drivers/char/pcmcia/ipwireless/tty.c | 4 ++-- drivers/isdn/gigaset/interface.c | 2 ++ drivers/usb/class/cdc-acm.c | 2 +- drivers/usb/serial/mos7720.c | 2 +- drivers/usb/serial/ti_usb_3410_5052.c | 4 ++-- 7 files changed, 10 insertions(+), 10 deletions(-) diff --git a/drivers/char/hvc_console.c b/drivers/char/hvc_console.c index 94e7e3c8c05..d97779ef72c 100644 --- a/drivers/char/hvc_console.c +++ b/drivers/char/hvc_console.c @@ -552,7 +552,7 @@ static int hvc_chars_in_buffer(struct tty_struct *tty) struct hvc_struct *hp = tty->driver_data; if (!hp) - return -1; + return 0; return hp->n_outbuf; } diff --git a/drivers/char/nozomi.c b/drivers/char/nozomi.c index 280b41c507a..ec58d8c387f 100644 --- a/drivers/char/nozomi.c +++ b/drivers/char/nozomi.c @@ -1866,16 +1866,14 @@ static s32 ntty_chars_in_buffer(struct tty_struct *tty) { struct port *port = tty->driver_data; struct nozomi *dc = get_dc_by_tty(tty); - s32 rval; + s32 rval = 0; if (unlikely(!dc || !port)) { - rval = -ENODEV; goto exit_in_buffer; } if (unlikely(!port->port.count)) { dev_err(&dc->pdev->dev, "No tty open?\n"); - rval = -ENODEV; goto exit_in_buffer; } diff --git a/drivers/char/pcmcia/ipwireless/tty.c b/drivers/char/pcmcia/ipwireless/tty.c index 569f2f7743a..674b3ab3587 100644 --- a/drivers/char/pcmcia/ipwireless/tty.c +++ b/drivers/char/pcmcia/ipwireless/tty.c @@ -320,10 +320,10 @@ static int ipw_chars_in_buffer(struct tty_struct *linux_tty) struct ipw_tty *tty = linux_tty->driver_data; if (!tty) - return -ENODEV; + return 0; if (!tty->open_count) - return -EINVAL; + return 0; return tty->tx_bytes_queued; } diff --git a/drivers/isdn/gigaset/interface.c b/drivers/isdn/gigaset/interface.c index 1ebfcab7466..8ff7e35c706 100644 --- a/drivers/isdn/gigaset/interface.c +++ b/drivers/isdn/gigaset/interface.c @@ -408,6 +408,8 @@ static int if_write_room(struct tty_struct *tty) return retval; } +/* FIXME: This function does not have error returns */ + static int if_chars_in_buffer(struct tty_struct *tty) { struct cardstate *cs; diff --git a/drivers/usb/class/cdc-acm.c b/drivers/usb/class/cdc-acm.c index 5b15d9d8896..e1f89416ef8 100644 --- a/drivers/usb/class/cdc-acm.c +++ b/drivers/usb/class/cdc-acm.c @@ -750,7 +750,7 @@ static int acm_tty_chars_in_buffer(struct tty_struct *tty) { struct acm *acm = tty->driver_data; if (!ACM_READY(acm)) - return -EINVAL; + return 0; /* * This is inaccurate (overcounts), but it works. */ diff --git a/drivers/usb/serial/mos7720.c b/drivers/usb/serial/mos7720.c index bfc5ce000ef..ccd4dd340d2 100644 --- a/drivers/usb/serial/mos7720.c +++ b/drivers/usb/serial/mos7720.c @@ -521,7 +521,7 @@ static int mos7720_chars_in_buffer(struct tty_struct *tty) mos7720_port = usb_get_serial_port_data(port); if (mos7720_port == NULL) { dbg("%s:leaving ...........", __func__); - return -ENODEV; + return 0; } for (i = 0; i < NUM_URBS; ++i) { diff --git a/drivers/usb/serial/ti_usb_3410_5052.c b/drivers/usb/serial/ti_usb_3410_5052.c index 14971a92699..3bc609fe224 100644 --- a/drivers/usb/serial/ti_usb_3410_5052.c +++ b/drivers/usb/serial/ti_usb_3410_5052.c @@ -727,7 +727,7 @@ static int ti_write_room(struct tty_struct *tty) dbg("%s - port %d", __func__, port->number); if (tport == NULL) - return -ENODEV; + return 0; spin_lock_irqsave(&tport->tp_lock, flags); room = ti_buf_space_avail(tport->tp_write_buf); @@ -748,7 +748,7 @@ static int ti_chars_in_buffer(struct tty_struct *tty) dbg("%s - port %d", __func__, port->number); if (tport == NULL) - return -ENODEV; + return 0; spin_lock_irqsave(&tport->tp_lock, flags); chars = ti_buf_data_avail(tport->tp_write_buf); -- cgit v1.2.3 From 0ecf24ef49d4f46ff5d6af357c3b9ec8d798160d Mon Sep 17 00:00:00 2001 From: Sonic Zhang Date: Mon, 20 Jul 2009 16:05:37 +0100 Subject: blackfin: fix wrong CTS inversion The Blackfin serial headers were inverting the CTS value leading to wrong handling of the CTS line which broke CTS/RTS handling completely. Signed-off-by: Sonic Zhang Signed-off-by: Mike Frysinger Signed-off-by: Alan Cox Signed-off-by: Linus Torvalds --- arch/blackfin/mach-bf518/include/mach/bfin_serial_5xx.h | 2 +- arch/blackfin/mach-bf527/include/mach/bfin_serial_5xx.h | 2 +- arch/blackfin/mach-bf533/include/mach/bfin_serial_5xx.h | 2 +- arch/blackfin/mach-bf537/include/mach/bfin_serial_5xx.h | 2 +- arch/blackfin/mach-bf538/include/mach/bfin_serial_5xx.h | 2 +- arch/blackfin/mach-bf561/include/mach/bfin_serial_5xx.h | 2 +- 6 files changed, 6 insertions(+), 6 deletions(-) diff --git a/arch/blackfin/mach-bf518/include/mach/bfin_serial_5xx.h b/arch/blackfin/mach-bf518/include/mach/bfin_serial_5xx.h index 0fb2ce5d840..dbade93395e 100644 --- a/arch/blackfin/mach-bf518/include/mach/bfin_serial_5xx.h +++ b/arch/blackfin/mach-bf518/include/mach/bfin_serial_5xx.h @@ -53,7 +53,7 @@ #define UART_SET_DLAB(uart) do { UART_PUT_LCR(uart, UART_GET_LCR(uart) | DLAB); SSYNC(); } while (0) #define UART_CLEAR_DLAB(uart) do { UART_PUT_LCR(uart, UART_GET_LCR(uart) & ~DLAB); SSYNC(); } while (0) -#define UART_GET_CTS(x) (!gpio_get_value(x->cts_pin)) +#define UART_GET_CTS(x) gpio_get_value(x->cts_pin) #define UART_DISABLE_RTS(x) gpio_set_value(x->rts_pin, 1) #define UART_ENABLE_RTS(x) gpio_set_value(x->rts_pin, 0) #define UART_ENABLE_INTS(x, v) UART_PUT_IER(x, v) diff --git a/arch/blackfin/mach-bf527/include/mach/bfin_serial_5xx.h b/arch/blackfin/mach-bf527/include/mach/bfin_serial_5xx.h index a625659dd67..ebd6cebc1fb 100644 --- a/arch/blackfin/mach-bf527/include/mach/bfin_serial_5xx.h +++ b/arch/blackfin/mach-bf527/include/mach/bfin_serial_5xx.h @@ -53,7 +53,7 @@ #define UART_SET_DLAB(uart) do { UART_PUT_LCR(uart, UART_GET_LCR(uart) | DLAB); SSYNC(); } while (0) #define UART_CLEAR_DLAB(uart) do { UART_PUT_LCR(uart, UART_GET_LCR(uart) & ~DLAB); SSYNC(); } while (0) -#define UART_GET_CTS(x) (!gpio_get_value(x->cts_pin)) +#define UART_GET_CTS(x) gpio_get_value(x->cts_pin) #define UART_DISABLE_RTS(x) gpio_set_value(x->rts_pin, 1) #define UART_ENABLE_RTS(x) gpio_set_value(x->rts_pin, 0) #define UART_ENABLE_INTS(x, v) UART_PUT_IER(x, v) diff --git a/arch/blackfin/mach-bf533/include/mach/bfin_serial_5xx.h b/arch/blackfin/mach-bf533/include/mach/bfin_serial_5xx.h index a3789d7ccf8..4062e24e759 100644 --- a/arch/blackfin/mach-bf533/include/mach/bfin_serial_5xx.h +++ b/arch/blackfin/mach-bf533/include/mach/bfin_serial_5xx.h @@ -53,7 +53,7 @@ #define UART_SET_DLAB(uart) do { UART_PUT_LCR(uart, UART_GET_LCR(uart) | DLAB); SSYNC(); } while (0) #define UART_CLEAR_DLAB(uart) do { UART_PUT_LCR(uart, UART_GET_LCR(uart) & ~DLAB); SSYNC(); } while (0) -#define UART_GET_CTS(x) (!gpio_get_value(x->cts_pin)) +#define UART_GET_CTS(x) gpio_get_value(x->cts_pin) #define UART_DISABLE_RTS(x) gpio_set_value(x->rts_pin, 1) #define UART_ENABLE_RTS(x) gpio_set_value(x->rts_pin, 0) #define UART_ENABLE_INTS(x, v) UART_PUT_IER(x, v) diff --git a/arch/blackfin/mach-bf537/include/mach/bfin_serial_5xx.h b/arch/blackfin/mach-bf537/include/mach/bfin_serial_5xx.h index b86662fb9de..e95d54f9af6 100644 --- a/arch/blackfin/mach-bf537/include/mach/bfin_serial_5xx.h +++ b/arch/blackfin/mach-bf537/include/mach/bfin_serial_5xx.h @@ -53,7 +53,7 @@ #define UART_SET_DLAB(uart) do { UART_PUT_LCR(uart, UART_GET_LCR(uart) | DLAB); SSYNC(); } while (0) #define UART_CLEAR_DLAB(uart) do { UART_PUT_LCR(uart, UART_GET_LCR(uart) & ~DLAB); SSYNC(); } while (0) -#define UART_GET_CTS(x) (!gpio_get_value(x->cts_pin)) +#define UART_GET_CTS(x) gpio_get_value(x->cts_pin) #define UART_DISABLE_RTS(x) gpio_set_value(x->rts_pin, 1) #define UART_ENABLE_RTS(x) gpio_set_value(x->rts_pin, 0) #define UART_ENABLE_INTS(x, v) UART_PUT_IER(x, v) diff --git a/arch/blackfin/mach-bf538/include/mach/bfin_serial_5xx.h b/arch/blackfin/mach-bf538/include/mach/bfin_serial_5xx.h index c536551eb4b..999f239fe1a 100644 --- a/arch/blackfin/mach-bf538/include/mach/bfin_serial_5xx.h +++ b/arch/blackfin/mach-bf538/include/mach/bfin_serial_5xx.h @@ -53,7 +53,7 @@ #define UART_SET_DLAB(uart) do { UART_PUT_LCR(uart, UART_GET_LCR(uart) | DLAB); SSYNC(); } while (0) #define UART_CLEAR_DLAB(uart) do { UART_PUT_LCR(uart, UART_GET_LCR(uart) & ~DLAB); SSYNC(); } while (0) -#define UART_GET_CTS(x) (!gpio_get_value(x->cts_pin)) +#define UART_GET_CTS(x) gpio_get_value(x->cts_pin) #define UART_DISABLE_RTS(x) gpio_set_value(x->rts_pin, 1) #define UART_ENABLE_RTS(x) gpio_set_value(x->rts_pin, 0) #define UART_ENABLE_INTS(x, v) UART_PUT_IER(x, v) diff --git a/arch/blackfin/mach-bf561/include/mach/bfin_serial_5xx.h b/arch/blackfin/mach-bf561/include/mach/bfin_serial_5xx.h index a1b50878553..fd5e8878b8c 100644 --- a/arch/blackfin/mach-bf561/include/mach/bfin_serial_5xx.h +++ b/arch/blackfin/mach-bf561/include/mach/bfin_serial_5xx.h @@ -53,7 +53,7 @@ #define UART_SET_DLAB(uart) do { UART_PUT_LCR(uart, UART_GET_LCR(uart) | DLAB); SSYNC(); } while (0) #define UART_CLEAR_DLAB(uart) do { UART_PUT_LCR(uart, UART_GET_LCR(uart) & ~DLAB); SSYNC(); } while (0) -#define UART_GET_CTS(x) (!gpio_get_value(x->cts_pin)) +#define UART_GET_CTS(x) gpio_get_value(x->cts_pin) #define UART_DISABLE_RTS(x) gpio_set_value(x->rts_pin, 1) #define UART_ENABLE_RTS(x) gpio_set_value(x->rts_pin, 0) #define UART_ENABLE_INTS(x, v) UART_PUT_IER(x, v) -- cgit v1.2.3 From 6cdbf734493d6e8f5afc6f539b82897772809d43 Mon Sep 17 00:00:00 2001 From: Nicolas Pitre Date: Sat, 18 Jul 2009 20:34:37 -0400 Subject: mvsdio: fix handling of partial word at the end of PIO transfer Standard data flow for MMC/SD/SDIO cards requires that the mvsdio controller be set for big endian operation. This is causing problems with buffers which length is not a multiple of 4 bytes as the last partial word doesn't get shifted all the way and stored properly in memory. Let's compensate for this. Signed-off-by: Nicolas Pitre CC: stable@kernel.org Signed-off-by: Linus Torvalds --- drivers/mmc/host/mvsdio.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/mmc/host/mvsdio.c b/drivers/mmc/host/mvsdio.c index b56d72ff06e..34e23489811 100644 --- a/drivers/mmc/host/mvsdio.c +++ b/drivers/mmc/host/mvsdio.c @@ -384,7 +384,7 @@ static irqreturn_t mvsd_irq(int irq, void *dev) u16 val[2] = {0, 0}; val[0] = mvsd_read(MVSD_FIFO); val[1] = mvsd_read(MVSD_FIFO); - memcpy(p, &val, s); + memcpy(p, ((void *)&val) + 4 - s, s); s = 0; intr_status = mvsd_read(MVSD_NOR_INTR_STATUS); } @@ -423,7 +423,7 @@ static irqreturn_t mvsd_irq(int irq, void *dev) if (s < 4) { if (s && (intr_status & MVSD_NOR_TX_AVAIL)) { u16 val[2] = {0, 0}; - memcpy(&val, p, s); + memcpy(((void *)&val) + 4 - s, p, s); mvsd_write(MVSD_FIFO, val[0]); mvsd_write(MVSD_FIFO, val[1]); s = 0; -- cgit v1.2.3 From 77f32dfdd97857280ae1ebac64382ff082cd7ea0 Mon Sep 17 00:00:00 2001 From: Denis Turischev Date: Mon, 20 Jul 2009 18:48:17 +0300 Subject: x86: Add reboot fixup for SBC-fitPC2 The CompuLab SBC-fitPC2 board needs to reboot via BIOS. Signed-off-by: Denis Turischev Signed-off-by: Mike Rapoport Signed-off-by: H. Peter Anvin --- arch/x86/kernel/reboot.c | 8 ++++++++ 1 file changed, 8 insertions(+) diff --git a/arch/x86/kernel/reboot.c b/arch/x86/kernel/reboot.c index d2d1ce8170f..508e982dd07 100644 --- a/arch/x86/kernel/reboot.c +++ b/arch/x86/kernel/reboot.c @@ -249,6 +249,14 @@ static struct dmi_system_id __initdata reboot_dmi_table[] = { DMI_MATCH(DMI_PRODUCT_NAME, "VGN-Z540N"), }, }, + { /* Handle problems with rebooting on CompuLab SBC-FITPC2 */ + .callback = set_bios_reboot, + .ident = "CompuLab SBC-FITPC2", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "CompuLab"), + DMI_MATCH(DMI_PRODUCT_NAME, "SBC-FITPC2"), + }, + }, { } }; -- cgit v1.2.3 From 155b73529583c38f30fd394d692b15a893960782 Mon Sep 17 00:00:00 2001 From: Uros Bizjak Date: Sun, 19 Jul 2009 18:06:35 +0200 Subject: x86: Fix movq immediate operand constraints in uaccess_64.h arch/x86/include/asm/uaccess_64.h uses wrong asm operand constraint ("ir") for movq insn. Since movq sign-extends its immediate operand, "er" constraint should be used instead. Attached patch changes all uses of __put_user_asm in uaccess_64.h to use "er" when "q" insn suffix is involved. Patch was compile tested on x86_64 with defconfig. Signed-off-by: Uros Bizjak Signed-off-by: H. Peter Anvin Cc: stable@kernel.org --- arch/x86/include/asm/uaccess_64.h | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-) diff --git a/arch/x86/include/asm/uaccess_64.h b/arch/x86/include/asm/uaccess_64.h index 8cc687326eb..db24b215fc5 100644 --- a/arch/x86/include/asm/uaccess_64.h +++ b/arch/x86/include/asm/uaccess_64.h @@ -88,11 +88,11 @@ int __copy_to_user(void __user *dst, const void *src, unsigned size) ret, "l", "k", "ir", 4); return ret; case 8:__put_user_asm(*(u64 *)src, (u64 __user *)dst, - ret, "q", "", "ir", 8); + ret, "q", "", "er", 8); return ret; case 10: __put_user_asm(*(u64 *)src, (u64 __user *)dst, - ret, "q", "", "ir", 10); + ret, "q", "", "er", 10); if (unlikely(ret)) return ret; asm("":::"memory"); @@ -101,12 +101,12 @@ int __copy_to_user(void __user *dst, const void *src, unsigned size) return ret; case 16: __put_user_asm(*(u64 *)src, (u64 __user *)dst, - ret, "q", "", "ir", 16); + ret, "q", "", "er", 16); if (unlikely(ret)) return ret; asm("":::"memory"); __put_user_asm(1[(u64 *)src], 1 + (u64 __user *)dst, - ret, "q", "", "ir", 8); + ret, "q", "", "er", 8); return ret; default: return copy_user_generic((__force void *)dst, src, size); @@ -157,7 +157,7 @@ int __copy_in_user(void __user *dst, const void __user *src, unsigned size) ret, "q", "", "=r", 8); if (likely(!ret)) __put_user_asm(tmp, (u64 __user *)dst, - ret, "q", "", "ir", 8); + ret, "q", "", "er", 8); return ret; } default: -- cgit v1.2.3 From 032e46cbf5fb1d768d7dec5631c224e22b4be46f Mon Sep 17 00:00:00 2001 From: Jerone Young Date: Mon, 20 Jul 2009 22:14:59 -0700 Subject: Input: atkbd - add force relese key quirk for Soltech TA12 Netbooks based on the Soltech TA12 do not send a key release for volume keys causing Linux to think the key is constantly being pressed forever. Added quirk data for forced release keys. BugLink: https://bugs.launchpad.net//bugs/397499 Signed-off-by: Jerone Young Signed-off-by: Tim Gardner Signed-off-by: Dmitry Torokhov --- drivers/input/keyboard/atkbd.c | 16 ++++++++++++++++ 1 file changed, 16 insertions(+) diff --git a/drivers/input/keyboard/atkbd.c b/drivers/input/keyboard/atkbd.c index 809a7ddbe3a..95fe0452dae 100644 --- a/drivers/input/keyboard/atkbd.c +++ b/drivers/input/keyboard/atkbd.c @@ -908,6 +908,13 @@ static unsigned int atkbd_amilo_xi3650_forced_release_keys[] = { 0x67, 0xed, 0x90, 0xa2, 0x99, 0xa4, 0xae, 0xb0, -1U }; +/* + * Soltech TA12 system with broken key release on volume keys and mute key + */ +static unsigned int atkdb_soltech_ta12_forced_release_keys[] = { + 0xa0, 0xae, 0xb0, -1U +}; + /* * atkbd_set_keycode_table() initializes keyboard's keycode table * according to the selected scancode set @@ -1592,6 +1599,15 @@ static struct dmi_system_id atkbd_dmi_quirk_table[] __initdata = { .callback = atkbd_setup_forced_release, .driver_data = atkbd_amilo_xi3650_forced_release_keys, }, + { + .ident = "Soltech Corporation TA12", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "Soltech Corporation"), + DMI_MATCH(DMI_PRODUCT_NAME, "TA12"), + }, + .callback = atkbd_setup_forced_release, + .driver_data = atkdb_soltech_ta12_forced_release_keys, + }, { } }; -- cgit v1.2.3 From ebe119cd0929df4878f758ebf880cb435e4dcaaf Mon Sep 17 00:00:00 2001 From: "H. Peter Anvin" Date: Mon, 20 Jul 2009 23:27:39 -0700 Subject: x86: Fix movq immediate operand constraints in uaccess.h The movq instruction, generated by __put_user_asm() when used for 64-bit data, takes a sign-extended immediate ("e") not a zero-extended immediate ("Z"). Signed-off-by: H. Peter Anvin Cc: Uros Bizjak Cc: stable@kernel.org --- arch/x86/include/asm/uaccess.h | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/arch/x86/include/asm/uaccess.h b/arch/x86/include/asm/uaccess.h index 20e6a795e16..d2c6c930b49 100644 --- a/arch/x86/include/asm/uaccess.h +++ b/arch/x86/include/asm/uaccess.h @@ -212,9 +212,9 @@ extern int __get_user_bad(void); : "A" ((typeof(*(ptr)))(x)), "c" (ptr) : "ebx") #else #define __put_user_asm_u64(x, ptr, retval, errret) \ - __put_user_asm(x, ptr, retval, "q", "", "Zr", errret) + __put_user_asm(x, ptr, retval, "q", "", "er", errret) #define __put_user_asm_ex_u64(x, addr) \ - __put_user_asm_ex(x, addr, "q", "", "Zr") + __put_user_asm_ex(x, addr, "q", "", "er") #define __put_user_x8(x, ptr, __ret_pu) __put_user_x(8, x, ptr, __ret_pu) #endif -- cgit v1.2.3 From f1015c447781729060c415f5133164c638561f25 Mon Sep 17 00:00:00 2001 From: dingdinghua Date: Wed, 15 Jul 2009 21:42:05 +0200 Subject: jbd: fix race between write_metadata_buffer and get_write_access The function journal_write_metadata_buffer() calls jbd_unlock_bh_state(bh_in) too early; this could potentially allow another thread to call get_write_access on the buffer head, modify the data, and dirty it, and allowing the wrong data to be written into the journal. Fortunately, if we lose this race, the only time this will actually cause filesystem corruption is if there is a system crash or other unclean shutdown of the system before the next commit can take place. Signed-off-by: dingdinghua Acked-by: "Theodore Ts'o" Signed-off-by: Jan Kara --- fs/jbd/journal.c | 20 +++++++++++--------- 1 file changed, 11 insertions(+), 9 deletions(-) diff --git a/fs/jbd/journal.c b/fs/jbd/journal.c index 94a64a199a6..f96f85092d1 100644 --- a/fs/jbd/journal.c +++ b/fs/jbd/journal.c @@ -287,6 +287,7 @@ int journal_write_metadata_buffer(transaction_t *transaction, struct page *new_page; unsigned int new_offset; struct buffer_head *bh_in = jh2bh(jh_in); + journal_t *journal = transaction->t_journal; /* * The buffer really shouldn't be locked: only the current committing @@ -300,6 +301,11 @@ int journal_write_metadata_buffer(transaction_t *transaction, J_ASSERT_BH(bh_in, buffer_jbddirty(bh_in)); new_bh = alloc_buffer_head(GFP_NOFS|__GFP_NOFAIL); + /* keep subsequent assertions sane */ + new_bh->b_state = 0; + init_buffer(new_bh, NULL, NULL); + atomic_set(&new_bh->b_count, 1); + new_jh = journal_add_journal_head(new_bh); /* This sleeps */ /* * If a new transaction has already done a buffer copy-out, then @@ -361,14 +367,6 @@ repeat: kunmap_atomic(mapped_data, KM_USER0); } - /* keep subsequent assertions sane */ - new_bh->b_state = 0; - init_buffer(new_bh, NULL, NULL); - atomic_set(&new_bh->b_count, 1); - jbd_unlock_bh_state(bh_in); - - new_jh = journal_add_journal_head(new_bh); /* This sleeps */ - set_bh_page(new_bh, new_page, new_offset); new_jh->b_transaction = NULL; new_bh->b_size = jh2bh(jh_in)->b_size; @@ -385,7 +383,11 @@ repeat: * copying is moved to the transaction's shadow queue. */ JBUFFER_TRACE(jh_in, "file as BJ_Shadow"); - journal_file_buffer(jh_in, transaction, BJ_Shadow); + spin_lock(&journal->j_list_lock); + __journal_file_buffer(jh_in, transaction, BJ_Shadow); + spin_unlock(&journal->j_list_lock); + jbd_unlock_bh_state(bh_in); + JBUFFER_TRACE(new_jh, "file as BJ_IO"); journal_file_buffer(new_jh, transaction, BJ_IO); -- cgit v1.2.3 From 591d2fb02ea80472d846c0b8507007806bdd69cc Mon Sep 17 00:00:00 2001 From: Thomas Gleixner Date: Tue, 21 Jul 2009 11:09:39 +0200 Subject: genirq: Delegate irq affinity setting to the irq thread irq_set_thread_affinity() calls set_cpus_allowed_ptr() which might sleep, but irq_set_thread_affinity() is called with desc->lock held and can be called from hard interrupt context as well. The code has another bug as it does not hold a ref on the task struct as required by set_cpus_allowed_ptr(). Just set the IRQTF_AFFINITY bit in action->thread_flags. The next time the thread runs it migrates itself. Solves all of the above problems nicely. Add kerneldoc to irq_set_thread_affinity() while at it. Signed-off-by: Thomas Gleixner LKML-Reference: --- include/linux/interrupt.h | 2 ++ kernel/irq/internals.h | 3 +-- kernel/irq/manage.c | 50 +++++++++++++++++++++++++++++++++++++++++------ kernel/irq/migration.c | 2 +- 4 files changed, 48 insertions(+), 9 deletions(-) diff --git a/include/linux/interrupt.h b/include/linux/interrupt.h index 2721f07e935..88b056ac562 100644 --- a/include/linux/interrupt.h +++ b/include/linux/interrupt.h @@ -64,11 +64,13 @@ * IRQTF_RUNTHREAD - signals that the interrupt handler thread should run * IRQTF_DIED - handler thread died * IRQTF_WARNED - warning "IRQ_WAKE_THREAD w/o thread_fn" has been printed + * IRQTF_AFFINITY - irq thread is requested to adjust affinity */ enum { IRQTF_RUNTHREAD, IRQTF_DIED, IRQTF_WARNED, + IRQTF_AFFINITY, }; typedef irqreturn_t (*irq_handler_t)(int, void *); diff --git a/kernel/irq/internals.h b/kernel/irq/internals.h index 73468253143..e70ed5592eb 100644 --- a/kernel/irq/internals.h +++ b/kernel/irq/internals.h @@ -42,8 +42,7 @@ static inline void unregister_handler_proc(unsigned int irq, extern int irq_select_affinity_usr(unsigned int irq); -extern void -irq_set_thread_affinity(struct irq_desc *desc, const struct cpumask *cpumask); +extern void irq_set_thread_affinity(struct irq_desc *desc); /* * Debugging printout: diff --git a/kernel/irq/manage.c b/kernel/irq/manage.c index 50da6767290..f0de36f13a4 100644 --- a/kernel/irq/manage.c +++ b/kernel/irq/manage.c @@ -80,14 +80,22 @@ int irq_can_set_affinity(unsigned int irq) return 1; } -void -irq_set_thread_affinity(struct irq_desc *desc, const struct cpumask *cpumask) +/** + * irq_set_thread_affinity - Notify irq threads to adjust affinity + * @desc: irq descriptor which has affitnity changed + * + * We just set IRQTF_AFFINITY and delegate the affinity setting + * to the interrupt thread itself. We can not call + * set_cpus_allowed_ptr() here as we hold desc->lock and this + * code can be called from hard interrupt context. + */ +void irq_set_thread_affinity(struct irq_desc *desc) { struct irqaction *action = desc->action; while (action) { if (action->thread) - set_cpus_allowed_ptr(action->thread, cpumask); + set_bit(IRQTF_AFFINITY, &action->thread_flags); action = action->next; } } @@ -112,7 +120,7 @@ int irq_set_affinity(unsigned int irq, const struct cpumask *cpumask) if (desc->status & IRQ_MOVE_PCNTXT) { if (!desc->chip->set_affinity(irq, cpumask)) { cpumask_copy(desc->affinity, cpumask); - irq_set_thread_affinity(desc, cpumask); + irq_set_thread_affinity(desc); } } else { @@ -122,7 +130,7 @@ int irq_set_affinity(unsigned int irq, const struct cpumask *cpumask) #else if (!desc->chip->set_affinity(irq, cpumask)) { cpumask_copy(desc->affinity, cpumask); - irq_set_thread_affinity(desc, cpumask); + irq_set_thread_affinity(desc); } #endif desc->status |= IRQ_AFFINITY_SET; @@ -176,7 +184,7 @@ int irq_select_affinity_usr(unsigned int irq) spin_lock_irqsave(&desc->lock, flags); ret = setup_affinity(irq, desc); if (!ret) - irq_set_thread_affinity(desc, desc->affinity); + irq_set_thread_affinity(desc); spin_unlock_irqrestore(&desc->lock, flags); return ret; @@ -443,6 +451,34 @@ static int irq_wait_for_interrupt(struct irqaction *action) return -1; } +/* + * Check whether we need to change the affinity of the interrupt thread. + */ +static void +irq_thread_check_affinity(struct irq_desc *desc, struct irqaction *action) +{ + cpumask_var_t mask; + + if (!test_and_clear_bit(IRQTF_AFFINITY, &action->thread_flags)) + return; + + /* + * In case we are out of memory we set IRQTF_AFFINITY again and + * try again next time + */ + if (!alloc_cpumask_var(&mask, GFP_KERNEL)) { + set_bit(IRQTF_AFFINITY, &action->thread_flags); + return; + } + + spin_lock_irq(&desc->lock); + cpumask_copy(mask, desc->affinity); + spin_unlock_irq(&desc->lock); + + set_cpus_allowed_ptr(current, mask); + free_cpumask_var(mask); +} + /* * Interrupt handler thread */ @@ -458,6 +494,8 @@ static int irq_thread(void *data) while (!irq_wait_for_interrupt(action)) { + irq_thread_check_affinity(desc, action); + atomic_inc(&desc->threads_active); spin_lock_irq(&desc->lock); diff --git a/kernel/irq/migration.c b/kernel/irq/migration.c index cfe767ca154..fcb6c96f262 100644 --- a/kernel/irq/migration.c +++ b/kernel/irq/migration.c @@ -45,7 +45,7 @@ void move_masked_irq(int irq) < nr_cpu_ids)) if (!desc->chip->set_affinity(irq, desc->pending_mask)) { cpumask_copy(desc->affinity, desc->pending_mask); - irq_set_thread_affinity(desc, desc->pending_mask); + irq_set_thread_affinity(desc); } cpumask_clear(desc->pending_mask); -- cgit v1.2.3 From 513a2396d8e8327aff1ce50bea3fb4f16ff3455b Mon Sep 17 00:00:00 2001 From: Zhu Yi Date: Thu, 9 Jul 2009 17:24:15 +0800 Subject: iwmc3200wifi: fix NULL pointer dereference in iwm_if_free The driver private data is now based on wiphy. So we should not touch the private data after wiphy_free() is called. The patch fixes the potential NULL pointer dereference by making the iwm_wdev_free() the last one on the interface removal path. Signed-off-by: Zhu Yi Signed-off-by: John W. Linville --- drivers/net/wireless/iwmc3200wifi/netdev.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/wireless/iwmc3200wifi/netdev.c b/drivers/net/wireless/iwmc3200wifi/netdev.c index aaa20c6885c..aea5ccf24cc 100644 --- a/drivers/net/wireless/iwmc3200wifi/netdev.c +++ b/drivers/net/wireless/iwmc3200wifi/netdev.c @@ -151,8 +151,8 @@ void iwm_if_free(struct iwm_priv *iwm) return; free_netdev(iwm_to_ndev(iwm)); - iwm_wdev_free(iwm); iwm_priv_deinit(iwm); + iwm_wdev_free(iwm); } int iwm_if_add(struct iwm_priv *iwm) -- cgit v1.2.3 From 872ed1902f511a8947021c562f5728a5bf0640b5 Mon Sep 17 00:00:00 2001 From: Reinette Chatre Date: Thu, 9 Jul 2009 10:33:37 -0700 Subject: iwlwifi: only show active power level via sysfs This changes the power_level file to adhere to the "one value per file" sysfs rule. The user will know which power level was requested as it will be the number just written to this file. It is thus not necessary to create a new sysfs file for this value. In addition it fixes a problem where powertop's parsing expects this value to be the first value in this file without any descriptions. Signed-off-by: Reinette Chatre cc: stable@kernel.org Signed-off-by: John W. Linville --- drivers/net/wireless/iwlwifi/iwl-agn.c | 4 +--- drivers/net/wireless/iwlwifi/iwl3945-base.c | 4 +--- 2 files changed, 2 insertions(+), 6 deletions(-) diff --git a/drivers/net/wireless/iwlwifi/iwl-agn.c b/drivers/net/wireless/iwlwifi/iwl-agn.c index 6d1519e1f01..355f50ea7fe 100644 --- a/drivers/net/wireless/iwlwifi/iwl-agn.c +++ b/drivers/net/wireless/iwlwifi/iwl-agn.c @@ -2675,12 +2675,10 @@ static ssize_t show_power_level(struct device *d, struct device_attribute *attr, char *buf) { struct iwl_priv *priv = dev_get_drvdata(d); - int mode = priv->power_data.user_power_setting; int level = priv->power_data.power_mode; char *p = buf; - p += sprintf(p, "INDEX:%d\t", level); - p += sprintf(p, "USER:%d\n", mode); + p += sprintf(p, "%d\n", level); return p - buf + 1; } diff --git a/drivers/net/wireless/iwlwifi/iwl3945-base.c b/drivers/net/wireless/iwlwifi/iwl3945-base.c index cb9bd4c8f25..956798f2c80 100644 --- a/drivers/net/wireless/iwlwifi/iwl3945-base.c +++ b/drivers/net/wireless/iwlwifi/iwl3945-base.c @@ -3643,12 +3643,10 @@ static ssize_t show_power_level(struct device *d, struct device_attribute *attr, char *buf) { struct iwl_priv *priv = dev_get_drvdata(d); - int mode = priv->power_data.user_power_setting; int level = priv->power_data.power_mode; char *p = buf; - p += sprintf(p, "INDEX:%d\t", level); - p += sprintf(p, "USER:%d\n", mode); + p += sprintf(p, "%d\n", level); return p - buf + 1; } -- cgit v1.2.3 From 7b80ece41aea0b73283c6df5a8f25d40aa13135d Mon Sep 17 00:00:00 2001 From: Reinette Chatre Date: Thu, 9 Jul 2009 10:33:39 -0700 Subject: iwlwifi: only update byte count table during aggregation The byte count table is only used for aggregation. Updating it in other cases caused fragmented frames to be dropped. This fixes http://www.intellinuxwireless.org/bugzilla/show_bug.cgi?id=2004 Signed-off-by: Reinette Chatre Signed-off-by: John W. Linville --- drivers/net/wireless/iwlwifi/iwl-tx.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/net/wireless/iwlwifi/iwl-tx.c b/drivers/net/wireless/iwlwifi/iwl-tx.c index 85ae7a62109..9bbeec9427f 100644 --- a/drivers/net/wireless/iwlwifi/iwl-tx.c +++ b/drivers/net/wireless/iwlwifi/iwl-tx.c @@ -872,7 +872,8 @@ int iwl_tx_skb(struct iwl_priv *priv, struct sk_buff *skb) iwl_print_hex_dump(priv, IWL_DL_TX, (u8 *)tx_cmd->hdr, hdr_len); /* Set up entry for this TFD in Tx byte-count array */ - priv->cfg->ops->lib->txq_update_byte_cnt_tbl(priv, txq, + if (info->flags & IEEE80211_TX_CTL_AMPDU) + priv->cfg->ops->lib->txq_update_byte_cnt_tbl(priv, txq, le16_to_cpu(tx_cmd->len)); pci_dma_sync_single_for_device(priv->pci_dev, txcmd_phys, -- cgit v1.2.3 From e2e414d92397c366396d13f627a98a20be92e509 Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Fri, 10 Jul 2009 11:38:14 +0200 Subject: mac80211: disable mesh My kvm instance was complaining a lot about sleeping in atomic contexts in the mesh code, and it turns out that both mesh_path_add() and mpp_path_add() need to be able to sleep (they even use synchronize_rcu()!). I put in a might_sleep() to annotate that, but I see no way, at least right now, of actually making sure those functions are only called from process context since they are both called during TX and RX and the mesh code itself even calls them with rcu_read_lock() "held". Therefore, let's disable it completely for now. It's possible that I'm only seeing this because the hwsim's beaconing is broken and thus the peers aren't discovered right away, but it is possible that this happens even if beaconing is working, for a peer that doesn't exist or so. It should be possible to solve this by deferring the freeing of the tables to call_rcu() instead of using synchronize_rcu(), and also using atomic allocations, but maybe it makes more sense to rework the code to not call these from atomic contexts and defer more of the work to the workqueue. Right now, I can't work on either of those solutions though. Signed-off-by: Johannes Berg Signed-off-by: John W. Linville --- net/mac80211/Kconfig | 1 + net/mac80211/mesh_pathtbl.c | 3 +++ 2 files changed, 4 insertions(+) diff --git a/net/mac80211/Kconfig b/net/mac80211/Kconfig index ba2643a43c7..7836ee92898 100644 --- a/net/mac80211/Kconfig +++ b/net/mac80211/Kconfig @@ -83,6 +83,7 @@ endmenu config MAC80211_MESH bool "Enable mac80211 mesh networking (pre-802.11s) support" depends on MAC80211 && EXPERIMENTAL + depends on BROKEN ---help--- This options enables support of Draft 802.11s mesh networking. The implementation is based on Draft 1.08 of the Mesh Networking diff --git a/net/mac80211/mesh_pathtbl.c b/net/mac80211/mesh_pathtbl.c index 3c72557df45..02f8709a181 100644 --- a/net/mac80211/mesh_pathtbl.c +++ b/net/mac80211/mesh_pathtbl.c @@ -175,6 +175,8 @@ int mesh_path_add(u8 *dst, struct ieee80211_sub_if_data *sdata) int err = 0; u32 hash_idx; + might_sleep(); + if (memcmp(dst, sdata->dev->dev_addr, ETH_ALEN) == 0) /* never add ourselves as neighbours */ return -ENOTSUPP; @@ -265,6 +267,7 @@ int mpp_path_add(u8 *dst, u8 *mpp, struct ieee80211_sub_if_data *sdata) int err = 0; u32 hash_idx; + might_sleep(); if (memcmp(dst, sdata->dev->dev_addr, ETH_ALEN) == 0) /* never add ourselves as neighbours */ -- cgit v1.2.3 From f54c142725ad2ba33c3ee627873cb6966bf05447 Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Fri, 10 Jul 2009 21:41:39 +0200 Subject: rfkill: allow toggling soft state in sysfs again Apparently there actually _are_ tools that try to set this in sysfs even though it wasn't supposed to be used this way without claiming first. Guess what: now that I've cleaned it all up it doesn't matter and we can simply allow setting the soft-block state in sysfs. Signed-off-by: Johannes Berg Tested-By: Darren Salt Signed-off-by: John W. Linville --- net/rfkill/core.c | 27 +++++++++++++++++++-------- 1 file changed, 19 insertions(+), 8 deletions(-) diff --git a/net/rfkill/core.c b/net/rfkill/core.c index 79693fe2001..6896c0b45b4 100644 --- a/net/rfkill/core.c +++ b/net/rfkill/core.c @@ -648,15 +648,26 @@ static ssize_t rfkill_state_store(struct device *dev, struct device_attribute *attr, const char *buf, size_t count) { - /* - * The intention was that userspace can only take control over - * a given device when/if rfkill-input doesn't control it due - * to user_claim. Since user_claim is currently unsupported, - * we never support changing the state from userspace -- this - * can be implemented again later. - */ + struct rfkill *rfkill = to_rfkill(dev); + unsigned long state; + int err; + + if (!capable(CAP_NET_ADMIN)) + return -EPERM; + + err = strict_strtoul(buf, 0, &state); + if (err) + return err; + + if (state != RFKILL_USER_STATE_SOFT_BLOCKED && + state != RFKILL_USER_STATE_UNBLOCKED) + return -EINVAL; + + mutex_lock(&rfkill_global_mutex); + rfkill_set_block(rfkill, state == RFKILL_USER_STATE_SOFT_BLOCKED); + mutex_unlock(&rfkill_global_mutex); - return -EPERM; + return err ?: count; } static ssize_t rfkill_claim_show(struct device *dev, -- cgit v1.2.3 From 8ef86c7bfac5b44529b73b84bc50d3cf574bfb4b Mon Sep 17 00:00:00 2001 From: Pavel Roskin Date: Fri, 10 Jul 2009 16:42:29 -0400 Subject: mac80211: fix injection in monitor mode The location of the 802.11 header is calculated incorrectly due to a wrong placement of parentheses. Found by kmemcheck. Signed-off-by: Pavel Roskin Signed-off-by: John W. Linville --- net/mac80211/tx.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/net/mac80211/tx.c b/net/mac80211/tx.c index d238a8939a0..3a8922cd103 100644 --- a/net/mac80211/tx.c +++ b/net/mac80211/tx.c @@ -1455,7 +1455,7 @@ int ieee80211_master_start_xmit(struct sk_buff *skb, struct net_device *dev) monitor_iface = UNKNOWN_ADDRESS; len_rthdr = ieee80211_get_radiotap_len(skb->data); - hdr = (struct ieee80211_hdr *)skb->data + len_rthdr; + hdr = (struct ieee80211_hdr *)(skb->data + len_rthdr); hdrlen = ieee80211_hdrlen(hdr->frame_control); /* check the header is complete in the frame */ -- cgit v1.2.3 From 48ab3578a65c5168ecaaa3b21292b643b7bcc2d5 Mon Sep 17 00:00:00 2001 From: Alan Jenkins Date: Sun, 12 Jul 2009 17:03:13 +0100 Subject: rfkill: fix rfkill_set_states() to set the hw state The point of this function is to set the software and hardware state at the same time. When I tried to use it, I found it was only setting the software state. Signed-off-by: Alan Jenkins Reviewed-by: Johannes Berg Signed-off-by: John W. Linville --- net/rfkill/core.c | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/net/rfkill/core.c b/net/rfkill/core.c index 6896c0b45b4..2fc4a1724eb 100644 --- a/net/rfkill/core.c +++ b/net/rfkill/core.c @@ -549,6 +549,10 @@ void rfkill_set_states(struct rfkill *rfkill, bool sw, bool hw) swprev = !!(rfkill->state & RFKILL_BLOCK_SW); hwprev = !!(rfkill->state & RFKILL_BLOCK_HW); __rfkill_set_sw_state(rfkill, sw); + if (hw) + rfkill->state |= RFKILL_BLOCK_HW; + else + rfkill->state &= ~RFKILL_BLOCK_HW; spin_unlock_irqrestore(&rfkill->lock, flags); -- cgit v1.2.3 From 5d41635195c06fc3116ef3921fe85a9a3ea5ab20 Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Mon, 13 Jul 2009 13:04:30 +0200 Subject: mac80211_hwsim: fix unregistration If you rmmod the module while associated, frames might be transmitted during unregistration -- which will crash if the hwsim%d interface is unregistered first, so only do that after all the virtual wiphys are gone. Signed-off-by: Johannes Berg Signed-off-by: John W. Linville --- drivers/net/wireless/mac80211_hwsim.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/wireless/mac80211_hwsim.c b/drivers/net/wireless/mac80211_hwsim.c index a111bda392e..5bed8241f3c 100644 --- a/drivers/net/wireless/mac80211_hwsim.c +++ b/drivers/net/wireless/mac80211_hwsim.c @@ -1167,8 +1167,8 @@ static void __exit exit_mac80211_hwsim(void) { printk(KERN_DEBUG "mac80211_hwsim: unregister radios\n"); - unregister_netdev(hwsim_mon); mac80211_hwsim_free(); + unregister_netdev(hwsim_mon); } -- cgit v1.2.3 From e603d9d824ff0eda98a65708a7e82112becf2dca Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Mon, 13 Jul 2009 13:25:58 +0200 Subject: mac80211_hwsim: fix use after free Once the "data" pointer is freed, we can't be iterating to the next item in the list any more so we need to use list_for_each_entry_safe with a temporary variable. Signed-off-by: Johannes Berg Signed-off-by: John W. Linville --- drivers/net/wireless/mac80211_hwsim.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/net/wireless/mac80211_hwsim.c b/drivers/net/wireless/mac80211_hwsim.c index 5bed8241f3c..7916ca3f84c 100644 --- a/drivers/net/wireless/mac80211_hwsim.c +++ b/drivers/net/wireless/mac80211_hwsim.c @@ -709,7 +709,7 @@ static const struct ieee80211_ops mac80211_hwsim_ops = static void mac80211_hwsim_free(void) { struct list_head tmplist, *i, *tmp; - struct mac80211_hwsim_data *data; + struct mac80211_hwsim_data *data, *tmpdata; INIT_LIST_HEAD(&tmplist); @@ -718,7 +718,7 @@ static void mac80211_hwsim_free(void) list_move(i, &tmplist); spin_unlock_bh(&hwsim_radio_lock); - list_for_each_entry(data, &tmplist, list) { + list_for_each_entry_safe(data, tmpdata, &tmplist, list) { debugfs_remove(data->debugfs_group); debugfs_remove(data->debugfs_ps); debugfs_remove(data->debugfs); -- cgit v1.2.3 From 35946a571099a50d2595c8866f07617d29558f53 Mon Sep 17 00:00:00 2001 From: Javier Cardona Date: Mon, 13 Jul 2009 17:00:10 -0700 Subject: mac80211: use correct address for mesh Path Error For forwarded frames, we save the precursor address in addr1 in case it needs to be used to send a Path Error. mesh_path_discard_frame, however, was using addr2 instead of addr1 to send Path Error frames, so correct that and also make the comment regarding this more clear. Signed-off-by: Andrey Yurovsky Signed-off-by: John W. Linville --- net/mac80211/mesh_pathtbl.c | 8 +++++--- 1 file changed, 5 insertions(+), 3 deletions(-) diff --git a/net/mac80211/mesh_pathtbl.c b/net/mac80211/mesh_pathtbl.c index 02f8709a181..479597e8858 100644 --- a/net/mac80211/mesh_pathtbl.c +++ b/net/mac80211/mesh_pathtbl.c @@ -494,8 +494,10 @@ void mesh_path_tx_pending(struct mesh_path *mpath) * @skb: frame to discard * @sdata: network subif the frame was to be sent through * - * If the frame was beign forwarded from another MP, a PERR frame will be sent - * to the precursor. + * If the frame was being forwarded from another MP, a PERR frame will be sent + * to the precursor. The precursor's address (i.e. the previous hop) was saved + * in addr1 of the frame-to-be-forwarded, and would only be overwritten once + * the destination is successfully resolved. * * Locking: the function must me called within a rcu_read_lock region */ @@ -510,7 +512,7 @@ void mesh_path_discard_frame(struct sk_buff *skb, u8 *ra, *da; da = hdr->addr3; - ra = hdr->addr2; + ra = hdr->addr1; mpath = mesh_path_lookup(da, sdata); if (mpath) dsn = ++mpath->dsn; -- cgit v1.2.3 From 65b5a69860ed3bc4224368b804d381cd9cafa90a Mon Sep 17 00:00:00 2001 From: Bob Copeland Date: Mon, 13 Jul 2009 21:57:39 -0400 Subject: ath5k: temporarily disable crypto for AP mode Pavel Roskin reported some issues with using AP mode without nohwcrypt=1. Most likely this is similar to the problem fixed some time ago in ath9k by 3f53dd64f192450cb331c0fecfc26ca952fb242f, "ath9k: Fix hw crypto configuration for TKIP in AP mode." That only affects TKIP but it's easiest to just disable that and WEP too until we get a proper fix in. Signed-off-by: Bob Copeland Signed-off-by: John W. Linville --- drivers/net/wireless/ath/ath5k/base.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/drivers/net/wireless/ath/ath5k/base.c b/drivers/net/wireless/ath/ath5k/base.c index ea045151f95..029c1bc7468 100644 --- a/drivers/net/wireless/ath/ath5k/base.c +++ b/drivers/net/wireless/ath/ath5k/base.c @@ -2970,6 +2970,9 @@ ath5k_set_key(struct ieee80211_hw *hw, enum set_key_cmd cmd, if (modparam_nohwcrypt) return -EOPNOTSUPP; + if (sc->opmode == NL80211_IFTYPE_AP) + return -EOPNOTSUPP; + switch (key->alg) { case ALG_WEP: case ALG_TKIP: -- cgit v1.2.3 From 3da7429ce92abd79b14e2275a28be144ce2c3013 Mon Sep 17 00:00:00 2001 From: Larry Finger Date: Tue, 14 Jul 2009 15:55:16 -0500 Subject: rtl8187: Fix for kernel oops when unloading with LEDs enabled MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit When rtl8187 is unloaded and CONFIG_RTL8187_LEDS is set, the kernel may oops when the module is unloaded as the workqueue for led_on was not being cancelled. This patch fixes the problem reported in http://marc.info/?l=linux-wireless&m=124742957615781&w=2. Reported-by: Gábor Stefanik Signed-off-by: Larry Finger Signed-off-by: John W. Linville --- drivers/net/wireless/rtl818x/rtl8187_leds.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/net/wireless/rtl818x/rtl8187_leds.c b/drivers/net/wireless/rtl818x/rtl8187_leds.c index b4425359224..cf9f899fe0e 100644 --- a/drivers/net/wireless/rtl818x/rtl8187_leds.c +++ b/drivers/net/wireless/rtl818x/rtl8187_leds.c @@ -208,11 +208,12 @@ void rtl8187_leds_exit(struct ieee80211_hw *dev) { struct rtl8187_priv *priv = dev->priv; - rtl8187_unregister_led(&priv->led_tx); /* turn the LED off before exiting */ queue_delayed_work(dev->workqueue, &priv->led_off, 0); cancel_delayed_work_sync(&priv->led_off); + cancel_delayed_work_sync(&priv->led_on); rtl8187_unregister_led(&priv->led_rx); + rtl8187_unregister_led(&priv->led_tx); } #endif /* def CONFIG_RTL8187_LED */ -- cgit v1.2.3 From 6c95e2a2f0f0bf4c8880d5b74b2f7f359d352d03 Mon Sep 17 00:00:00 2001 From: Niko Jokinen Date: Wed, 15 Jul 2009 11:00:53 +0300 Subject: nl80211: Memory leak fixed Potential memory leak via msg pointer in nl80211_get_key() function. Signed-off-by: Niko Jokinen Signed-off-by: Luciano Coelho Signed-off-by: John W. Linville --- net/wireless/nl80211.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) diff --git a/net/wireless/nl80211.c b/net/wireless/nl80211.c index 43bdb1372ca..634496b3ed7 100644 --- a/net/wireless/nl80211.c +++ b/net/wireless/nl80211.c @@ -997,7 +997,7 @@ static int nl80211_get_key(struct sk_buff *skb, struct genl_info *info) if (IS_ERR(hdr)) { err = PTR_ERR(hdr); - goto out; + goto free_msg; } cookie.msg = msg; @@ -1011,7 +1011,7 @@ static int nl80211_get_key(struct sk_buff *skb, struct genl_info *info) &cookie, get_key_callback); if (err) - goto out; + goto free_msg; if (cookie.error) goto nla_put_failure; @@ -1022,6 +1022,7 @@ static int nl80211_get_key(struct sk_buff *skb, struct genl_info *info) nla_put_failure: err = -ENOBUFS; + free_msg: nlmsg_free(msg); out: cfg80211_put_dev(drv); -- cgit v1.2.3 From 7adfd5c71693b81e995283805b17aa4a2ee0ecd9 Mon Sep 17 00:00:00 2001 From: Andy Whitcroft Date: Thu, 16 Jul 2009 16:28:11 +0100 Subject: rt2x00: Fix chipset detection for rt2500usb The commit below changed the semantics of rt2x00_check_rev so that it no longer checked the bottom 4 bits of the rev were non-zero. During that conversion this part of the check was not propogated to the rt2500usb initialisation. commit 358623c22c9fd837b3b1b444377037f72553dc9f Author: Ivo van Doorn Date: Tue May 5 19:46:08 2009 +0200 rt2x00: Simplify rt2x00_check_rev Without this check rt73 devices are miss recognised as rt2500 devices and two drivers are loaded. Preventing the device being used. Reinstate this check. Signed-off-by: Andy Whitcroft Signed-off-by: John W. Linville --- drivers/net/wireless/rt2x00/rt2500usb.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/drivers/net/wireless/rt2x00/rt2500usb.c b/drivers/net/wireless/rt2x00/rt2500usb.c index 66daf68ff0e..ce75426764a 100644 --- a/drivers/net/wireless/rt2x00/rt2500usb.c +++ b/drivers/net/wireless/rt2x00/rt2500usb.c @@ -1550,7 +1550,9 @@ static int rt2500usb_init_eeprom(struct rt2x00_dev *rt2x00dev) rt2500usb_register_read(rt2x00dev, MAC_CSR0, ®); rt2x00_set_chip(rt2x00dev, RT2570, value, reg); - if (!rt2x00_check_rev(&rt2x00dev->chip, 0x000ffff0, 0)) { + if (!rt2x00_check_rev(&rt2x00dev->chip, 0x000ffff0, 0) || + rt2x00_check_rev(&rt2x00dev->chip, 0x0000000f, 0)) { + ERROR(rt2x00dev, "Invalid RT chipset detected.\n"); return -ENODEV; } -- cgit v1.2.3 From c66284f2a421f6aebbafd56cb8b90b8e6a9cb2de Mon Sep 17 00:00:00 2001 From: "Luis R. Rodriguez" Date: Thu, 16 Jul 2009 10:17:35 -0700 Subject: ath9k: Tune ANI function processing on AP mode during ANI reset For AP mode we must tune ANI specially for 2 GHz and for 5 GHz. We mask in only the flags we want to toggle on ath9k_hw_ani_control() through the ah->ani_function bitmask, this will take care of ignoring changes during ANI reset which we were disabling before. Testedy-by: Steven Luo Cc: Bennyam Malavazi Cc: Jouni Malinen Signed-off-by: Luis R. Rodriguez Signed-off-by: John W. Linville --- drivers/net/wireless/ath/ath9k/ani.c | 12 ++++++++++++ 1 file changed, 12 insertions(+) diff --git a/drivers/net/wireless/ath/ath9k/ani.c b/drivers/net/wireless/ath/ath9k/ani.c index 1aeafb511dd..aad259b4c19 100644 --- a/drivers/net/wireless/ath/ath9k/ani.c +++ b/drivers/net/wireless/ath/ath9k/ani.c @@ -478,6 +478,18 @@ void ath9k_ani_reset(struct ath_hw *ah) "Reset ANI state opmode %u\n", ah->opmode); ah->stats.ast_ani_reset++; + if (ah->opmode == NL80211_IFTYPE_AP) { + /* + * ath9k_hw_ani_control() will only process items set on + * ah->ani_function + */ + if (IS_CHAN_2GHZ(chan)) + ah->ani_function = (ATH9K_ANI_SPUR_IMMUNITY_LEVEL | + ATH9K_ANI_FIRSTEP_LEVEL); + else + ah->ani_function = 0; + } + ath9k_hw_ani_control(ah, ATH9K_ANI_NOISE_IMMUNITY_LEVEL, 0); ath9k_hw_ani_control(ah, ATH9K_ANI_SPUR_IMMUNITY_LEVEL, 0); ath9k_hw_ani_control(ah, ATH9K_ANI_FIRSTEP_LEVEL, 0); -- cgit v1.2.3 From e56f0975360369347725c49654ecfe3792710429 Mon Sep 17 00:00:00 2001 From: Alan Jenkins Date: Sat, 18 Jul 2009 19:20:20 +0100 Subject: rfkill: remove too-strict __must_check Some drivers don't need the return value of rfkill_set_hw_state(), so it should not be marked as __must_check. Signed-off-by: Alan Jenkins Acked-by: Johannes Berg Signed-off-by: John W. Linville --- include/linux/rfkill.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/include/linux/rfkill.h b/include/linux/rfkill.h index 2ce29831feb..278777fa8a3 100644 --- a/include/linux/rfkill.h +++ b/include/linux/rfkill.h @@ -224,7 +224,7 @@ void rfkill_destroy(struct rfkill *rfkill); * should be blocked) so that drivers need not keep track of the soft * block state -- which they might not be able to. */ -bool __must_check rfkill_set_hw_state(struct rfkill *rfkill, bool blocked); +bool rfkill_set_hw_state(struct rfkill *rfkill, bool blocked); /** * rfkill_set_sw_state - Set the internal rfkill software block state -- cgit v1.2.3 From 9e81eccf199d910e5ea8db377a43478e4eccd033 Mon Sep 17 00:00:00 2001 From: Christian Lamparter Date: Sun, 19 Jul 2009 05:05:37 +0200 Subject: cfg80211: double free in __cfg80211_scan_done This patch fixes a double free corruption in __cfg80211_scan_done: ================================================ BUG kmalloc-512: Object already free ------------------------------------------------ INFO: Allocated in load_elf_binary+0x18b/0x19af age=6 INFO: Freed in load_elf_binary+0x104e/0x19af age=5 INFO: Slab 0xffffea0001bae4c0 objects=14 used=7 INFO: Object 0xffff88007e8a9918 @offset=6424 fp=0xffff88007e8a9488 Bytes b4 0xffff88007e8a9908: 00 00 00 00 00 00 00 00 5a 5a [...] Pid: 28705, comm: rmmod Tainted: P C 2.6.31-rc2-wl #1 Call Trace: [] print_trailer+0x14e/0x16e [] object_err+0x42/0x61 [] __slab_free+0x2af/0x396 [] ? wiphy_unregister+0x92/0x142 [cfg80211] [] kfree+0x13c/0x17a [] ? wiphy_unregister+0x92/0x142 [cfg80211] [] wiphy_unregister+0x92/0x142 [cfg80211] [] ieee80211_unregister_hw+0xc8/0xff [mac80211] [] p54_unregister_common+0x31/0x66 [p54common] [...] FIX kmalloc-512: Object at 0xffff88007e8a9918 not freed The code path which leads to the *funny* double free: request = rdev->scan_req; dev = dev_get_by_index(&init_net, request->ifidx); /* * the driver was unloaded recently and * therefore dev_get_by_index will return NULL! */ if (!dev) goto out; [...] rdev->scan_req = NULL; /* not executed... */ [...] out: kfree(request); Signed-off-by: Christian Lamparter Signed-off-by: John W. Linville --- net/wireless/scan.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) diff --git a/net/wireless/scan.c b/net/wireless/scan.c index f8e71b30000..9271118e1fc 100644 --- a/net/wireless/scan.c +++ b/net/wireless/scan.c @@ -35,8 +35,6 @@ void cfg80211_scan_done(struct cfg80211_scan_request *request, bool aborted) else nl80211_send_scan_done(wiphy_to_dev(request->wiphy), dev); - wiphy_to_dev(request->wiphy)->scan_req = NULL; - #ifdef CONFIG_WIRELESS_EXT if (!aborted) { memset(&wrqu, 0, sizeof(wrqu)); @@ -48,6 +46,7 @@ void cfg80211_scan_done(struct cfg80211_scan_request *request, bool aborted) dev_put(dev); out: + wiphy_to_dev(request->wiphy)->scan_req = NULL; kfree(request); } EXPORT_SYMBOL(cfg80211_scan_done); -- cgit v1.2.3 From e9084ec98bb9aa3abc6cf73181177780ce7546f8 Mon Sep 17 00:00:00 2001 From: Jan Beulich Date: Thu, 16 Jul 2009 09:45:11 +0100 Subject: x86, mce: Fix set_trigger() accessor Fix the condition checking the result of strchr() (which previously could result in an oops), and make the function return the number of bytes actively used. [ Impact: fix oops ] Signed-off-by: Jan Beulich Cc: Andi Kleen LKML-Reference: <4A5F04B7020000780000AB59@vpn.id2.novell.com> Signed-off-by: H. Peter Anvin --- arch/x86/kernel/cpu/mcheck/mce.c | 6 ++---- 1 file changed, 2 insertions(+), 4 deletions(-) diff --git a/arch/x86/kernel/cpu/mcheck/mce.c b/arch/x86/kernel/cpu/mcheck/mce.c index 484c1e5f658..1cfb623ce11 100644 --- a/arch/x86/kernel/cpu/mcheck/mce.c +++ b/arch/x86/kernel/cpu/mcheck/mce.c @@ -1692,17 +1692,15 @@ static ssize_t set_trigger(struct sys_device *s, struct sysdev_attribute *attr, const char *buf, size_t siz) { char *p; - int len; strncpy(mce_helper, buf, sizeof(mce_helper)); mce_helper[sizeof(mce_helper)-1] = 0; - len = strlen(mce_helper); p = strchr(mce_helper, '\n'); - if (*p) + if (p) *p = 0; - return len; + return strlen(mce_helper) + !!p; } static ssize_t set_ignore_ce(struct sys_device *s, -- cgit v1.2.3 From 25177476675142d3ebd60849e0cebc46bd1eef8e Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Uwe=20Kleine-K=C3=B6nig?= Date: Sat, 11 Jul 2009 20:52:48 +0000 Subject: macsonic: move probe function to .devinit.text MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit A pointer to mac_sonic_probe is passed to the core via platform_driver_register and so the function must not disappear when the .init sections are discarded. Otherwise (if also having HOTPLUG=y) unbinding and binding a device to the driver via sysfs will result in an oops as does a device being registered late. Various other functions that are called by mac_sonic_probe need to move to .devinit.text, too. An alternative to this patch is using platform_driver_probe instead of platform_driver_register plus removing the pointer to the probe function from the struct platform_driver. Signed-off-by: Uwe Kleine-König Tested-by: Finn Thain Signed-off-by: David S. Miller --- drivers/net/macsonic.c | 14 +++++++------- 1 file changed, 7 insertions(+), 7 deletions(-) diff --git a/drivers/net/macsonic.c b/drivers/net/macsonic.c index acd143da161..8f492c7b809 100644 --- a/drivers/net/macsonic.c +++ b/drivers/net/macsonic.c @@ -179,7 +179,7 @@ static const struct net_device_ops macsonic_netdev_ops = { .ndo_set_mac_address = eth_mac_addr, }; -static int __init macsonic_init(struct net_device *dev) +static int __devinit macsonic_init(struct net_device *dev) { struct sonic_local* lp = netdev_priv(dev); @@ -223,7 +223,7 @@ static int __init macsonic_init(struct net_device *dev) return 0; } -static int __init mac_onboard_sonic_ethernet_addr(struct net_device *dev) +static int __devinit mac_onboard_sonic_ethernet_addr(struct net_device *dev) { struct sonic_local *lp = netdev_priv(dev); const int prom_addr = ONBOARD_SONIC_PROM_BASE; @@ -288,7 +288,7 @@ static int __init mac_onboard_sonic_ethernet_addr(struct net_device *dev) } else return 0; } -static int __init mac_onboard_sonic_probe(struct net_device *dev) +static int __devinit mac_onboard_sonic_probe(struct net_device *dev) { /* Bwahahaha */ static int once_is_more_than_enough; @@ -409,7 +409,7 @@ static int __init mac_onboard_sonic_probe(struct net_device *dev) return macsonic_init(dev); } -static int __init mac_nubus_sonic_ethernet_addr(struct net_device *dev, +static int __devinit mac_nubus_sonic_ethernet_addr(struct net_device *dev, unsigned long prom_addr, int id) { @@ -424,7 +424,7 @@ static int __init mac_nubus_sonic_ethernet_addr(struct net_device *dev, return 0; } -static int __init macsonic_ident(struct nubus_dev *ndev) +static int __devinit macsonic_ident(struct nubus_dev *ndev) { if (ndev->dr_hw == NUBUS_DRHW_ASANTE_LC && ndev->dr_sw == NUBUS_DRSW_SONIC_LC) @@ -449,7 +449,7 @@ static int __init macsonic_ident(struct nubus_dev *ndev) return -1; } -static int __init mac_nubus_sonic_probe(struct net_device *dev) +static int __devinit mac_nubus_sonic_probe(struct net_device *dev) { static int slots; struct nubus_dev* ndev = NULL; @@ -562,7 +562,7 @@ static int __init mac_nubus_sonic_probe(struct net_device *dev) return macsonic_init(dev); } -static int __init mac_sonic_probe(struct platform_device *pdev) +static int __devinit mac_sonic_probe(struct platform_device *pdev) { struct net_device *dev; struct sonic_local *lp; -- cgit v1.2.3 From 4564cba71637d3b4ea3730f5637b21a9eb3c8999 Mon Sep 17 00:00:00 2001 From: Finn Thain Date: Tue, 21 Jul 2009 12:21:49 -0700 Subject: macsonic, jazzsonic: fix oops on module unload Set the driver data before using it. Fixes an oops when doing rmmod. Signed-off-by: Finn Thain Signed-off-by: David S. Miller --- drivers/net/jazzsonic.c | 1 + drivers/net/macsonic.c | 1 + 2 files changed, 2 insertions(+) diff --git a/drivers/net/jazzsonic.c b/drivers/net/jazzsonic.c index d12106b47bf..2f286091394 100644 --- a/drivers/net/jazzsonic.c +++ b/drivers/net/jazzsonic.c @@ -229,6 +229,7 @@ static int __init jazz_sonic_probe(struct platform_device *pdev) lp = netdev_priv(dev); lp->device = &pdev->dev; SET_NETDEV_DEV(dev, &pdev->dev); + platform_set_drvdata(pdev, dev); netdev_boot_setup_check(dev); diff --git a/drivers/net/macsonic.c b/drivers/net/macsonic.c index 8f492c7b809..61eabcac734 100644 --- a/drivers/net/macsonic.c +++ b/drivers/net/macsonic.c @@ -575,6 +575,7 @@ static int __devinit mac_sonic_probe(struct platform_device *pdev) lp = netdev_priv(dev); lp->device = &pdev->dev; SET_NETDEV_DEV(dev, &pdev->dev); + platform_set_drvdata(pdev, dev); /* This will catch fatal stuff like -ENOMEM as well as success */ err = mac_onboard_sonic_probe(dev); -- cgit v1.2.3 From 5549f7cdf84c02939fd368d0842aa2f472bb6e98 Mon Sep 17 00:00:00 2001 From: Eric Paris Date: Tue, 7 Jul 2009 10:28:23 -0400 Subject: inotify: drop user watch count when a watch is removed The inotify rewrite forgot to drop the inotify watch use cound when a watch was removed. This means that a single inotify fd can only ever register a maximum of /proc/sys/fs/max_user_watches even if some of those had been freed. Signed-off-by: Eric Paris --- fs/notify/inotify/inotify_user.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/fs/notify/inotify/inotify_user.c b/fs/notify/inotify/inotify_user.c index ff27a296584..1a870f9157b 100644 --- a/fs/notify/inotify/inotify_user.c +++ b/fs/notify/inotify/inotify_user.c @@ -404,6 +404,8 @@ skip_send_ignore: /* removed from idr, drop that reference */ fsnotify_put_mark(entry); + + atomic_dec(&group->inotify_data.user->inotify_watches); } /* ding dong the mark is dead */ -- cgit v1.2.3 From 75fe2b26394c59c8e16bd7b76f4be5d048103ad1 Mon Sep 17 00:00:00 2001 From: Eric Paris Date: Tue, 7 Jul 2009 10:28:23 -0400 Subject: inotify: do not leak inode marks in inotify_add_watch inotify_add_watch had a couple of problems. The biggest being that if inotify_add_watch was called on the same inode twice (to update or change the event mask) a refence was taken on the original inode mark by fsnotify_find_mark_entry but was not being dropped at the end of the inotify_add_watch call. Thus if inotify_rm_watch was called although the mark was removed from the inode, the refcnt wouldn't hit zero and we would leak memory. Reported-by: Catalin Marinas Signed-off-by: Eric Paris --- fs/notify/inotify/inotify_user.c | 14 ++++++++++---- 1 file changed, 10 insertions(+), 4 deletions(-) diff --git a/fs/notify/inotify/inotify_user.c b/fs/notify/inotify/inotify_user.c index 1a870f9157b..aff4214f16c 100644 --- a/fs/notify/inotify/inotify_user.c +++ b/fs/notify/inotify/inotify_user.c @@ -463,9 +463,6 @@ retry: goto out_err; spin_lock(&group->inotify_data.idr_lock); - /* if entry is added to the idr we keep the reference obtained - * through fsnotify_mark_add. remember to drop this reference - * when entry is removed from idr */ ret = idr_get_new_above(&group->inotify_data.idr, entry, ++group->inotify_data.last_wd, &ientry->wd); @@ -476,8 +473,13 @@ retry: goto out_err; } atomic_inc(&group->inotify_data.user->inotify_watches); + + /* we put the mark on the idr, take a reference */ + fsnotify_get_mark(entry); } + ret = ientry->wd; + spin_lock(&entry->lock); old_mask = entry->mask; @@ -508,7 +510,11 @@ retry: fsnotify_recalc_group_mask(group); } - return ientry->wd; + /* this either matches fsnotify_find_mark_entry, or init_mark_entry + * depending on which path we took... */ + fsnotify_put_mark(entry); + + return ret; out_err: /* see this isn't supposed to happen, just kill the watch */ -- cgit v1.2.3 From 7e790dd5fc937bc8d2400c30a05e32a9e9eef276 Mon Sep 17 00:00:00 2001 From: Eric Paris Date: Tue, 7 Jul 2009 10:28:24 -0400 Subject: inotify: fix error paths in inotify_update_watch inotify_update_watch could leave things in a horrid state on a number of error paths. We could try to remove idr entries that didn't exist, we could send an IN_IGNORED to userspace for watches that don't exist, and a bit of other stupidity. Clean these up by doing the idr addition before we put the mark on the inode since we can clean that up on error and getting off the inode's mark list is hard. Signed-off-by: Eric Paris --- fs/notify/inotify/inotify_user.c | 79 +++++++++++++++++++++++++--------------- 1 file changed, 49 insertions(+), 30 deletions(-) diff --git a/fs/notify/inotify/inotify_user.c b/fs/notify/inotify/inotify_user.c index aff4214f16c..726118a5845 100644 --- a/fs/notify/inotify/inotify_user.c +++ b/fs/notify/inotify/inotify_user.c @@ -365,6 +365,17 @@ static int inotify_find_inode(const char __user *dirname, struct path *path, uns return error; } +static void inotify_remove_from_idr(struct fsnotify_group *group, + struct inotify_inode_mark_entry *ientry) +{ + struct idr *idr; + + spin_lock(&group->inotify_data.idr_lock); + idr = &group->inotify_data.idr; + idr_remove(idr, ientry->wd); + spin_unlock(&group->inotify_data.idr_lock); + ientry->wd = -1; +} /* * Send IN_IGNORED for this wd, remove this wd from the idr, and drop the * internal reference help on the mark because it is in the idr. @@ -375,7 +386,6 @@ void inotify_ignored_and_remove_idr(struct fsnotify_mark_entry *entry, struct inotify_inode_mark_entry *ientry; struct inotify_event_private_data *event_priv; struct fsnotify_event_private_data *fsn_event_priv; - struct idr *idr; ientry = container_of(entry, struct inotify_inode_mark_entry, fsn_entry); @@ -397,10 +407,7 @@ void inotify_ignored_and_remove_idr(struct fsnotify_mark_entry *entry, skip_send_ignore: /* remove this entry from the idr */ - spin_lock(&group->inotify_data.idr_lock); - idr = &group->inotify_data.idr; - idr_remove(idr, ientry->wd); - spin_unlock(&group->inotify_data.idr_lock); + inotify_remove_from_idr(group, ientry); /* removed from idr, drop that reference */ fsnotify_put_mark(entry); @@ -420,6 +427,7 @@ static int inotify_update_watch(struct fsnotify_group *group, struct inode *inod { struct fsnotify_mark_entry *entry = NULL; struct inotify_inode_mark_entry *ientry; + struct inotify_inode_mark_entry *tmp_ientry; int ret = 0; int add = (arg & IN_MASK_ADD); __u32 mask; @@ -430,50 +438,60 @@ static int inotify_update_watch(struct fsnotify_group *group, struct inode *inod if (unlikely(!mask)) return -EINVAL; - ientry = kmem_cache_alloc(inotify_inode_mark_cachep, GFP_KERNEL); - if (unlikely(!ientry)) + tmp_ientry = kmem_cache_alloc(inotify_inode_mark_cachep, GFP_KERNEL); + if (unlikely(!tmp_ientry)) return -ENOMEM; /* we set the mask at the end after attaching it */ - fsnotify_init_mark(&ientry->fsn_entry, inotify_free_mark); - ientry->wd = 0; + fsnotify_init_mark(&tmp_ientry->fsn_entry, inotify_free_mark); + tmp_ientry->wd = -1; find_entry: spin_lock(&inode->i_lock); entry = fsnotify_find_mark_entry(group, inode); spin_unlock(&inode->i_lock); if (entry) { - kmem_cache_free(inotify_inode_mark_cachep, ientry); ientry = container_of(entry, struct inotify_inode_mark_entry, fsn_entry); } else { - if (atomic_read(&group->inotify_data.user->inotify_watches) >= inotify_max_user_watches) { - ret = -ENOSPC; - goto out_err; - } - - ret = fsnotify_add_mark(&ientry->fsn_entry, group, inode); - if (ret == -EEXIST) - goto find_entry; - else if (ret) + ret = -ENOSPC; + if (atomic_read(&group->inotify_data.user->inotify_watches) >= inotify_max_user_watches) goto out_err; - - entry = &ientry->fsn_entry; retry: ret = -ENOMEM; if (unlikely(!idr_pre_get(&group->inotify_data.idr, GFP_KERNEL))) goto out_err; spin_lock(&group->inotify_data.idr_lock); - ret = idr_get_new_above(&group->inotify_data.idr, entry, - ++group->inotify_data.last_wd, - &ientry->wd); + ret = idr_get_new_above(&group->inotify_data.idr, &tmp_ientry->fsn_entry, + group->inotify_data.last_wd, + &tmp_ientry->wd); spin_unlock(&group->inotify_data.idr_lock); if (ret) { if (ret == -EAGAIN) goto retry; goto out_err; } + + ret = fsnotify_add_mark(&tmp_ientry->fsn_entry, group, inode); + if (ret) { + inotify_remove_from_idr(group, tmp_ientry); + if (ret == -EEXIST) + goto find_entry; + goto out_err; + } + + /* tmp_ientry has been added to the inode, so we are all set up. + * now we just need to make sure tmp_ientry doesn't get freed and + * we need to set up entry and ientry so the generic code can + * do its thing. */ + ientry = tmp_ientry; + entry = &ientry->fsn_entry; + tmp_ientry = NULL; + atomic_inc(&group->inotify_data.user->inotify_watches); + /* update the idr hint */ + group->inotify_data.last_wd = ientry->wd; + /* we put the mark on the idr, take a reference */ fsnotify_get_mark(entry); } @@ -514,14 +532,15 @@ retry: * depending on which path we took... */ fsnotify_put_mark(entry); - return ret; - out_err: - /* see this isn't supposed to happen, just kill the watch */ - if (entry) { - fsnotify_destroy_mark_by_entry(entry); - fsnotify_put_mark(entry); + /* could be an error, could be that we found an existing mark */ + if (tmp_ientry) { + /* on the idr but didn't make it on the inode */ + if (tmp_ientry->wd != -1) + inotify_remove_from_idr(group, tmp_ientry); + kmem_cache_free(inotify_inode_mark_cachep, tmp_ientry); } + return ret; } -- cgit v1.2.3 From 520dc2a526fd681337883b6ff1ddcf7c23b1b063 Mon Sep 17 00:00:00 2001 From: Eric Paris Date: Mon, 13 Jul 2009 15:56:54 -0400 Subject: fsnotify: use def_bool in kconfig instead of letting the user choose fsnotify doens't give the user anything. If someone chooses inotify or dnotify it should build fsnotify, if they don't select one it shouldn't be built. This patch changes fsnotify to be a def_bool=n and makes everything else select it. Also fixes the issue people complained about on lwn where gdm hung because they didn't have inotify and they didn't get the inotify build option..... Signed-off-by: Eric Paris --- fs/notify/Kconfig | 12 +----------- fs/notify/dnotify/Kconfig | 2 +- fs/notify/inotify/Kconfig | 2 +- 3 files changed, 3 insertions(+), 13 deletions(-) diff --git a/fs/notify/Kconfig b/fs/notify/Kconfig index 31dac7e3b0f..dffbb0911d0 100644 --- a/fs/notify/Kconfig +++ b/fs/notify/Kconfig @@ -1,15 +1,5 @@ config FSNOTIFY - bool "Filesystem notification backend" - default y - ---help--- - fsnotify is a backend for filesystem notification. fsnotify does - not provide any userspace interface but does provide the basis - needed for other notification schemes such as dnotify, inotify, - and fanotify. - - Say Y here to enable fsnotify suport. - - If unsure, say Y. + def_bool n source "fs/notify/dnotify/Kconfig" source "fs/notify/inotify/Kconfig" diff --git a/fs/notify/dnotify/Kconfig b/fs/notify/dnotify/Kconfig index 904ff8d5405..f9c1ca139d8 100644 --- a/fs/notify/dnotify/Kconfig +++ b/fs/notify/dnotify/Kconfig @@ -1,6 +1,6 @@ config DNOTIFY bool "Dnotify support" - depends on FSNOTIFY + select FSNOTIFY default y help Dnotify is a directory-based per-fd file change notification system diff --git a/fs/notify/inotify/Kconfig b/fs/notify/inotify/Kconfig index 5356884289a..3e56dbffe72 100644 --- a/fs/notify/inotify/Kconfig +++ b/fs/notify/inotify/Kconfig @@ -15,7 +15,7 @@ config INOTIFY config INOTIFY_USER bool "Inotify support for userspace" - depends on FSNOTIFY + select FSNOTIFY default y ---help--- Say Y here to enable inotify support for userspace, including the -- cgit v1.2.3 From 4a148ba988988b9c400ad0f2cbccc155289b954b Mon Sep 17 00:00:00 2001 From: Eric Paris Date: Mon, 13 Jul 2009 15:56:55 -0400 Subject: inotify: check filename before dropping repeat events inotify drops events if the last event on the queue is the same as the current event. But it does 2 things wrong. First it is comparing old->inode with new->inode. But after an event if put on the queue the ->inode is no longer allowed to be used. It's possible between the last event and this new event the inode could be reused and we would falsely match the inode's memory address between two differing events. The second problem is that when a file is removed fsnotify is passed the negative dentry for the removed object rather than the postive dentry from immediately before the removal. This mean the (broken) inotify tail drop code was matching the NULL ->inode of differing events. The fix is to check the file name which is stored with events when doing the tail drop instead of wrongly checking the address of the stored ->inode. Reported-by: Scott James Remnant Signed-off-by: Eric Paris --- fs/notify/notification.c | 9 +++++++-- 1 file changed, 7 insertions(+), 2 deletions(-) diff --git a/fs/notify/notification.c b/fs/notify/notification.c index 959b73e756f..69391fe8efb 100644 --- a/fs/notify/notification.c +++ b/fs/notify/notification.c @@ -136,10 +136,15 @@ static bool event_compare(struct fsnotify_event *old, struct fsnotify_event *new { if ((old->mask == new->mask) && (old->to_tell == new->to_tell) && - (old->data_type == new->data_type)) { + (old->data_type == new->data_type) && + (old->name_len == new->name_len)) { switch (old->data_type) { case (FSNOTIFY_EVENT_INODE): - if (old->inode == new->inode) + /* remember, after old was put on the wait_q we aren't + * allowed to look at the inode any more, only thing + * left to check was if the file_name is the same */ + if (old->name_len && + !strcmp(old->file_name, new->file_name)) return true; break; case (FSNOTIFY_EVENT_PATH): -- cgit v1.2.3 From c05594b62125c528d93af3a78229793aae36df7f Mon Sep 17 00:00:00 2001 From: Eric Paris Date: Mon, 13 Jul 2009 15:56:55 -0400 Subject: fsnotify: fix inotify tail drop check with path entries fsnotify drops new events when they are the same as the tail event on the queue to be sent to userspace. The problem is that if the event comes with a path we forget to break out of the switch statement and fall into the code path which matches on events that do not have any type of file backed information (things like IN_UNMOUNT and IN_Q_OVERFLOW). The problem is that this code thinks all such events should be dropped. Fix is to add a break. Signed-off-by: Eric Paris --- fs/notify/notification.c | 1 + 1 file changed, 1 insertion(+) diff --git a/fs/notify/notification.c b/fs/notify/notification.c index 69391fe8efb..2b20feaf263 100644 --- a/fs/notify/notification.c +++ b/fs/notify/notification.c @@ -151,6 +151,7 @@ static bool event_compare(struct fsnotify_event *old, struct fsnotify_event *new if ((old->path.mnt == new->path.mnt) && (old->path.dentry == new->path.dentry)) return true; + break; case (FSNOTIFY_EVENT_NONE): return true; }; -- cgit v1.2.3 From f44aebcc566d1d6275f7191867b9633dc11de2ee Mon Sep 17 00:00:00 2001 From: Eric Paris Date: Wed, 15 Jul 2009 15:49:52 -0400 Subject: inotify: use GFP_NOFS under potential memory pressure inotify can have a watchs removed under filesystem reclaim. ================================= [ INFO: inconsistent lock state ] 2.6.31-rc2 #16 --------------------------------- inconsistent {IN-RECLAIM_FS-W} -> {RECLAIM_FS-ON-W} usage. khubd/217 [HC0[0]:SC0[0]:HE1:SE1] takes: (iprune_mutex){+.+.?.}, at: [] invalidate_inodes+0x20/0xe3 {IN-RECLAIM_FS-W} state was registered at: [] __lock_acquire+0x2c9/0xac4 [] lock_acquire+0x9f/0xc2 [] __mutex_lock_common+0x2d/0x323 [] mutex_lock_nested+0x2e/0x36 [] shrink_icache_memory+0x38/0x1b2 [] shrink_slab+0xe2/0x13c [] kswapd+0x3d1/0x55d [] kthread+0x66/0x6b [] kernel_thread_helper+0x7/0x10 [] 0xffffffff Two things are needed to fix this. First we need a method to tell fsnotify_create_event() to use GFP_NOFS and second we need to stop using one global IN_IGNORED event and allocate them one at a time. This solves current issues with multiple IN_IGNORED on a queue having tail drop problems and simplifies the allocations since we don't have to worry about two tasks opperating on the IGNORED event concurrently. Signed-off-by: Eric Paris --- fs/notify/fsnotify.c | 4 +++- fs/notify/inotify/inotify_user.c | 18 ++++++++++++------ fs/notify/notification.c | 9 +++++---- include/linux/fsnotify_backend.h | 2 +- 4 files changed, 21 insertions(+), 12 deletions(-) diff --git a/fs/notify/fsnotify.c b/fs/notify/fsnotify.c index ec2f7bd7681..037e878e03f 100644 --- a/fs/notify/fsnotify.c +++ b/fs/notify/fsnotify.c @@ -159,7 +159,9 @@ void fsnotify(struct inode *to_tell, __u32 mask, void *data, int data_is, const if (!group->ops->should_send_event(group, to_tell, mask)) continue; if (!event) { - event = fsnotify_create_event(to_tell, mask, data, data_is, file_name, cookie); + event = fsnotify_create_event(to_tell, mask, data, + data_is, file_name, cookie, + GFP_KERNEL); /* shit, we OOM'd and now we can't tell, maybe * someday someone else will want to do something * here */ diff --git a/fs/notify/inotify/inotify_user.c b/fs/notify/inotify/inotify_user.c index 726118a5845..f30d9bbc2e1 100644 --- a/fs/notify/inotify/inotify_user.c +++ b/fs/notify/inotify/inotify_user.c @@ -57,7 +57,6 @@ int inotify_max_user_watches __read_mostly; static struct kmem_cache *inotify_inode_mark_cachep __read_mostly; struct kmem_cache *event_priv_cachep __read_mostly; -static struct fsnotify_event *inotify_ignored_event; /* * When inotify registers a new group it increments this and uses that @@ -384,12 +383,19 @@ void inotify_ignored_and_remove_idr(struct fsnotify_mark_entry *entry, struct fsnotify_group *group) { struct inotify_inode_mark_entry *ientry; + struct fsnotify_event *ignored_event; struct inotify_event_private_data *event_priv; struct fsnotify_event_private_data *fsn_event_priv; + ignored_event = fsnotify_create_event(NULL, FS_IN_IGNORED, NULL, + FSNOTIFY_EVENT_NONE, NULL, 0, + GFP_NOFS); + if (!ignored_event) + return; + ientry = container_of(entry, struct inotify_inode_mark_entry, fsn_entry); - event_priv = kmem_cache_alloc(event_priv_cachep, GFP_KERNEL); + event_priv = kmem_cache_alloc(event_priv_cachep, GFP_NOFS); if (unlikely(!event_priv)) goto skip_send_ignore; @@ -398,7 +404,7 @@ void inotify_ignored_and_remove_idr(struct fsnotify_mark_entry *entry, fsn_event_priv->group = group; event_priv->wd = ientry->wd; - fsnotify_add_notify_event(group, inotify_ignored_event, fsn_event_priv); + fsnotify_add_notify_event(group, ignored_event, fsn_event_priv); /* did the private data get added? */ if (list_empty(&fsn_event_priv->event_list)) @@ -406,6 +412,9 @@ void inotify_ignored_and_remove_idr(struct fsnotify_mark_entry *entry, skip_send_ignore: + /* matches the reference taken when the event was created */ + fsnotify_put_event(ignored_event); + /* remove this entry from the idr */ inotify_remove_from_idr(group, ientry); @@ -748,9 +757,6 @@ static int __init inotify_user_setup(void) inotify_inode_mark_cachep = KMEM_CACHE(inotify_inode_mark_entry, SLAB_PANIC); event_priv_cachep = KMEM_CACHE(inotify_event_private_data, SLAB_PANIC); - inotify_ignored_event = fsnotify_create_event(NULL, FS_IN_IGNORED, NULL, FSNOTIFY_EVENT_NONE, NULL, 0); - if (!inotify_ignored_event) - panic("unable to allocate the inotify ignored event\n"); inotify_max_queued_events = 16384; inotify_max_user_instances = 128; diff --git a/fs/notify/notification.c b/fs/notify/notification.c index 2b20feaf263..521368574e9 100644 --- a/fs/notify/notification.c +++ b/fs/notify/notification.c @@ -153,7 +153,7 @@ static bool event_compare(struct fsnotify_event *old, struct fsnotify_event *new return true; break; case (FSNOTIFY_EVENT_NONE): - return true; + return false; }; } return false; @@ -345,18 +345,19 @@ static void initialize_event(struct fsnotify_event *event) * @name the filename, if available */ struct fsnotify_event *fsnotify_create_event(struct inode *to_tell, __u32 mask, void *data, - int data_type, const char *name, u32 cookie) + int data_type, const char *name, u32 cookie, + gfp_t gfp) { struct fsnotify_event *event; - event = kmem_cache_alloc(fsnotify_event_cachep, GFP_KERNEL); + event = kmem_cache_alloc(fsnotify_event_cachep, gfp); if (!event) return NULL; initialize_event(event); if (name) { - event->file_name = kstrdup(name, GFP_KERNEL); + event->file_name = kstrdup(name, gfp); if (!event->file_name) { kmem_cache_free(fsnotify_event_cachep, event); return NULL; diff --git a/include/linux/fsnotify_backend.h b/include/linux/fsnotify_backend.h index 6c3de999fb3..4d6f47b5118 100644 --- a/include/linux/fsnotify_backend.h +++ b/include/linux/fsnotify_backend.h @@ -352,7 +352,7 @@ extern void fsnotify_unmount_inodes(struct list_head *list); /* put here because inotify does some weird stuff when destroying watches */ extern struct fsnotify_event *fsnotify_create_event(struct inode *to_tell, __u32 mask, void *data, int data_is, const char *name, - u32 cookie); + u32 cookie, gfp_t gfp); #else -- cgit v1.2.3 From 87cf65601e1709e57f7e28f0f7b3eb0a992c1782 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?R=C3=A9mi=20Denis-Courmont?= Date: Tue, 21 Jul 2009 01:58:35 +0000 Subject: USB host CDC Phonet network interface driver MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Many Nokia handsets support a Phonet interface to the cellular modem via a vendor-specific USB interface. CDC Phonet follows the Communications Device Class model, with one control interface, and and a pair of inactive and active data alternative interface. The later has two bulk endpoint, one per direction. This was tested against Nokia E61, Nokia N95, and the existing Phonet gadget function for the Linux composite USB gadget framework. Signed-off-by: Rémi Denis-Courmont Signed-off-by: David S. Miller --- drivers/net/usb/Kconfig | 8 + drivers/net/usb/Makefile | 1 + drivers/net/usb/cdc-phonet.c | 461 +++++++++++++++++++++++++++++++++++++++++++ 3 files changed, 470 insertions(+) create mode 100644 drivers/net/usb/cdc-phonet.c diff --git a/drivers/net/usb/Kconfig b/drivers/net/usb/Kconfig index a906d399813..c47237c2d63 100644 --- a/drivers/net/usb/Kconfig +++ b/drivers/net/usb/Kconfig @@ -369,4 +369,12 @@ config USB_NET_INT51X1 (Powerline Communications) solution with an Intellon INT51x1/INT5200 chip, like the "devolo dLan duo". +config USB_CDC_PHONET + tristate "CDC Phonet support" + depends on PHONET + help + Choose this option to support the Phonet interface to a Nokia + cellular modem, as found on most Nokia handsets with the + "PC suite" USB profile. + endmenu diff --git a/drivers/net/usb/Makefile b/drivers/net/usb/Makefile index b870b0b1cbe..e17afb78f37 100644 --- a/drivers/net/usb/Makefile +++ b/drivers/net/usb/Makefile @@ -21,4 +21,5 @@ obj-$(CONFIG_USB_NET_ZAURUS) += zaurus.o obj-$(CONFIG_USB_NET_MCS7830) += mcs7830.o obj-$(CONFIG_USB_USBNET) += usbnet.o obj-$(CONFIG_USB_NET_INT51X1) += int51x1.o +obj-$(CONFIG_USB_CDC_PHONET) += cdc-phonet.o diff --git a/drivers/net/usb/cdc-phonet.c b/drivers/net/usb/cdc-phonet.c new file mode 100644 index 00000000000..792af72da8a --- /dev/null +++ b/drivers/net/usb/cdc-phonet.c @@ -0,0 +1,461 @@ +/* + * phonet.c -- USB CDC Phonet host driver + * + * Copyright (C) 2008-2009 Nokia Corporation. All rights reserved. + * + * Author: Rémi Denis-Courmont + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA + * 02110-1301 USA + */ + +#include +#include +#include +#include +#include +#include +#include + +#define PN_MEDIA_USB 0x1B + +static const unsigned rxq_size = 17; + +struct usbpn_dev { + struct net_device *dev; + + struct usb_interface *intf, *data_intf; + struct usb_device *usb; + unsigned int tx_pipe, rx_pipe; + u8 active_setting; + u8 disconnected; + + unsigned tx_queue; + spinlock_t tx_lock; + + spinlock_t rx_lock; + struct sk_buff *rx_skb; + struct urb *urbs[0]; +}; + +static void tx_complete(struct urb *req); +static void rx_complete(struct urb *req); + +/* + * Network device callbacks + */ +static int usbpn_xmit(struct sk_buff *skb, struct net_device *dev) +{ + struct usbpn_dev *pnd = netdev_priv(dev); + struct urb *req = NULL; + unsigned long flags; + int err; + + if (skb->protocol != htons(ETH_P_PHONET)) + goto drop; + + req = usb_alloc_urb(0, GFP_ATOMIC); + if (!req) + goto drop; + usb_fill_bulk_urb(req, pnd->usb, pnd->tx_pipe, skb->data, skb->len, + tx_complete, skb); + req->transfer_flags = URB_ZERO_PACKET; + err = usb_submit_urb(req, GFP_ATOMIC); + if (err) { + usb_free_urb(req); + goto drop; + } + + spin_lock_irqsave(&pnd->tx_lock, flags); + pnd->tx_queue++; + if (pnd->tx_queue >= dev->tx_queue_len) + netif_stop_queue(dev); + spin_unlock_irqrestore(&pnd->tx_lock, flags); + return 0; + +drop: + dev_kfree_skb(skb); + dev->stats.tx_dropped++; + return 0; +} + +static void tx_complete(struct urb *req) +{ + struct sk_buff *skb = req->context; + struct net_device *dev = skb->dev; + struct usbpn_dev *pnd = netdev_priv(dev); + + switch (req->status) { + case 0: + dev->stats.tx_bytes += skb->len; + break; + + case -ENOENT: + case -ECONNRESET: + case -ESHUTDOWN: + dev->stats.tx_aborted_errors++; + default: + dev->stats.tx_errors++; + dev_dbg(&dev->dev, "TX error (%d)\n", req->status); + } + dev->stats.tx_packets++; + + spin_lock(&pnd->tx_lock); + pnd->tx_queue--; + netif_wake_queue(dev); + spin_unlock(&pnd->tx_lock); + + dev_kfree_skb_any(skb); + usb_free_urb(req); +} + +static int rx_submit(struct usbpn_dev *pnd, struct urb *req, gfp_t gfp_flags) +{ + struct net_device *dev = pnd->dev; + struct page *page; + int err; + + page = __netdev_alloc_page(dev, gfp_flags); + if (!page) + return -ENOMEM; + + usb_fill_bulk_urb(req, pnd->usb, pnd->rx_pipe, page_address(page), + PAGE_SIZE, rx_complete, dev); + req->transfer_flags = 0; + err = usb_submit_urb(req, gfp_flags); + if (unlikely(err)) { + dev_dbg(&dev->dev, "RX submit error (%d)\n", err); + netdev_free_page(dev, page); + } + return err; +} + +static void rx_complete(struct urb *req) +{ + struct net_device *dev = req->context; + struct usbpn_dev *pnd = netdev_priv(dev); + struct page *page = virt_to_page(req->transfer_buffer); + struct sk_buff *skb; + unsigned long flags; + + switch (req->status) { + case 0: + spin_lock_irqsave(&pnd->rx_lock, flags); + skb = pnd->rx_skb; + if (!skb) { + skb = pnd->rx_skb = netdev_alloc_skb(dev, 12); + if (likely(skb)) { + /* Can't use pskb_pull() on page in IRQ */ + memcpy(skb_put(skb, 1), page_address(page), 1); + skb_add_rx_frag(skb, skb_shinfo(skb)->nr_frags, + page, 1, req->actual_length); + page = NULL; + } + } else { + skb_add_rx_frag(skb, skb_shinfo(skb)->nr_frags, + page, 0, req->actual_length); + page = NULL; + } + if (req->actual_length < PAGE_SIZE) + pnd->rx_skb = NULL; /* Last fragment */ + else + skb = NULL; + spin_unlock_irqrestore(&pnd->rx_lock, flags); + if (skb) { + skb->protocol = htons(ETH_P_PHONET); + skb_reset_mac_header(skb); + __skb_pull(skb, 1); + skb->dev = dev; + dev->stats.rx_packets++; + dev->stats.rx_bytes += skb->len; + + netif_rx(skb); + } + goto resubmit; + + case -ENOENT: + case -ECONNRESET: + case -ESHUTDOWN: + req = NULL; + break; + + case -EOVERFLOW: + dev->stats.rx_over_errors++; + dev_dbg(&dev->dev, "RX overflow\n"); + break; + + case -EILSEQ: + dev->stats.rx_crc_errors++; + break; + } + + dev->stats.rx_errors++; +resubmit: + if (page) + netdev_free_page(dev, page); + if (req) + rx_submit(pnd, req, GFP_ATOMIC); +} + +static int usbpn_close(struct net_device *dev); + +static int usbpn_open(struct net_device *dev) +{ + struct usbpn_dev *pnd = netdev_priv(dev); + int err; + unsigned i; + unsigned num = pnd->data_intf->cur_altsetting->desc.bInterfaceNumber; + + err = usb_set_interface(pnd->usb, num, pnd->active_setting); + if (err) + return err; + + for (i = 0; i < rxq_size; i++) { + struct urb *req = usb_alloc_urb(0, GFP_KERNEL); + + if (!req || rx_submit(pnd, req, GFP_KERNEL)) { + usbpn_close(dev); + return -ENOMEM; + } + pnd->urbs[i] = req; + } + + netif_wake_queue(dev); + return 0; +} + +static int usbpn_close(struct net_device *dev) +{ + struct usbpn_dev *pnd = netdev_priv(dev); + unsigned i; + unsigned num = pnd->data_intf->cur_altsetting->desc.bInterfaceNumber; + + netif_stop_queue(dev); + + for (i = 0; i < rxq_size; i++) { + struct urb *req = pnd->urbs[i]; + + if (!req) + continue; + usb_kill_urb(req); + usb_free_urb(req); + pnd->urbs[i] = NULL; + } + + return usb_set_interface(pnd->usb, num, !pnd->active_setting); +} + +static int usbpn_set_mtu(struct net_device *dev, int new_mtu) +{ + if ((new_mtu < PHONET_MIN_MTU) || (new_mtu > PHONET_MAX_MTU)) + return -EINVAL; + + dev->mtu = new_mtu; + return 0; +} + +static const struct net_device_ops usbpn_ops = { + .ndo_open = usbpn_open, + .ndo_stop = usbpn_close, + .ndo_start_xmit = usbpn_xmit, + .ndo_change_mtu = usbpn_set_mtu, +}; + +static void usbpn_setup(struct net_device *dev) +{ + dev->features = 0; + dev->netdev_ops = &usbpn_ops, + dev->header_ops = &phonet_header_ops; + dev->type = ARPHRD_PHONET; + dev->flags = IFF_POINTOPOINT | IFF_NOARP; + dev->mtu = PHONET_MAX_MTU; + dev->hard_header_len = 1; + dev->dev_addr[0] = PN_MEDIA_USB; + dev->addr_len = 1; + dev->tx_queue_len = 3; + + dev->destructor = free_netdev; +} + +/* + * USB driver callbacks + */ +static struct usb_device_id usbpn_ids[] = { + { + .match_flags = USB_DEVICE_ID_MATCH_VENDOR + | USB_DEVICE_ID_MATCH_INT_CLASS + | USB_DEVICE_ID_MATCH_INT_SUBCLASS, + .idVendor = 0x0421, /* Nokia */ + .bInterfaceClass = USB_CLASS_COMM, + .bInterfaceSubClass = 0xFE, + }, + { }, +}; + +MODULE_DEVICE_TABLE(usb, usbpn_ids); + +static struct usb_driver usbpn_driver; + +int usbpn_probe(struct usb_interface *intf, const struct usb_device_id *id) +{ + static const char ifname[] = "usbpn%d"; + const struct usb_cdc_union_desc *union_header = NULL; + const struct usb_cdc_header_desc *phonet_header = NULL; + const struct usb_host_interface *data_desc; + struct usb_interface *data_intf; + struct usb_device *usbdev = interface_to_usbdev(intf); + struct net_device *dev; + struct usbpn_dev *pnd; + u8 *data; + int len, err; + + data = intf->altsetting->extra; + len = intf->altsetting->extralen; + while (len >= 3) { + u8 dlen = data[0]; + if (dlen < 3) + return -EINVAL; + + /* bDescriptorType */ + if (data[1] == USB_DT_CS_INTERFACE) { + /* bDescriptorSubType */ + switch (data[2]) { + case USB_CDC_UNION_TYPE: + if (union_header || dlen < 5) + break; + union_header = + (struct usb_cdc_union_desc *)data; + break; + case 0xAB: + if (phonet_header || dlen < 5) + break; + phonet_header = + (struct usb_cdc_header_desc *)data; + break; + } + } + data += dlen; + len -= dlen; + } + + if (!union_header || !phonet_header) + return -EINVAL; + + data_intf = usb_ifnum_to_if(usbdev, union_header->bSlaveInterface0); + if (data_intf == NULL) + return -ENODEV; + /* Data interface has one inactive and one active setting */ + if (data_intf->num_altsetting != 2) + return -EINVAL; + if (data_intf->altsetting[0].desc.bNumEndpoints == 0 + && data_intf->altsetting[1].desc.bNumEndpoints == 2) + data_desc = data_intf->altsetting + 1; + else + if (data_intf->altsetting[0].desc.bNumEndpoints == 2 + && data_intf->altsetting[1].desc.bNumEndpoints == 0) + data_desc = data_intf->altsetting; + else + return -EINVAL; + + dev = alloc_netdev(sizeof(*pnd) + sizeof(pnd->urbs[0]) * rxq_size, + ifname, usbpn_setup); + if (!dev) + return -ENOMEM; + + pnd = netdev_priv(dev); + SET_NETDEV_DEV(dev, &intf->dev); + netif_stop_queue(dev); + + pnd->dev = dev; + pnd->usb = usb_get_dev(usbdev); + pnd->intf = intf; + pnd->data_intf = data_intf; + spin_lock_init(&pnd->tx_lock); + spin_lock_init(&pnd->rx_lock); + /* Endpoints */ + if (usb_pipein(data_desc->endpoint[0].desc.bEndpointAddress)) { + pnd->rx_pipe = usb_rcvbulkpipe(usbdev, + data_desc->endpoint[0].desc.bEndpointAddress); + pnd->tx_pipe = usb_sndbulkpipe(usbdev, + data_desc->endpoint[1].desc.bEndpointAddress); + } else { + pnd->rx_pipe = usb_rcvbulkpipe(usbdev, + data_desc->endpoint[1].desc.bEndpointAddress); + pnd->tx_pipe = usb_sndbulkpipe(usbdev, + data_desc->endpoint[0].desc.bEndpointAddress); + } + pnd->active_setting = data_desc - data_intf->altsetting; + + err = usb_driver_claim_interface(&usbpn_driver, data_intf, pnd); + if (err) + goto out; + + /* Force inactive mode until the network device is brought UP */ + usb_set_interface(usbdev, union_header->bSlaveInterface0, + !pnd->active_setting); + usb_set_intfdata(intf, pnd); + + err = register_netdev(dev); + if (err) { + usb_driver_release_interface(&usbpn_driver, data_intf); + goto out; + } + + dev_dbg(&dev->dev, "USB CDC Phonet device found\n"); + return 0; + +out: + usb_set_intfdata(intf, NULL); + free_netdev(dev); + return err; +} + +static void usbpn_disconnect(struct usb_interface *intf) +{ + struct usbpn_dev *pnd = usb_get_intfdata(intf); + struct usb_device *usb = pnd->usb; + + if (pnd->disconnected) + return; + + pnd->disconnected = 1; + usb_driver_release_interface(&usbpn_driver, + (pnd->intf == intf) ? pnd->data_intf : pnd->intf); + unregister_netdev(pnd->dev); + usb_put_dev(usb); +} + +static struct usb_driver usbpn_driver = { + .name = "cdc_phonet", + .probe = usbpn_probe, + .disconnect = usbpn_disconnect, + .id_table = usbpn_ids, +}; + +static int __init usbpn_init(void) +{ + return usb_register(&usbpn_driver); +} + +static void __exit usbpn_exit(void) +{ + usb_deregister(&usbpn_driver); +} + +module_init(usbpn_init); +module_exit(usbpn_exit); + +MODULE_AUTHOR("Remi Denis-Courmont"); +MODULE_DESCRIPTION("USB CDC Phonet host interface"); +MODULE_LICENSE("GPL"); -- cgit v1.2.3 From acb9c1b2f406d25c381de2b429f65706cc04d3b5 Mon Sep 17 00:00:00 2001 From: Evgeniy Polyakov Date: Tue, 21 Jul 2009 12:43:51 -0700 Subject: connector: maintainer/mail update. Signed-off-by: Evgeniy Polyakov Signed-off-by: David S. Miller --- Documentation/connector/cn_test.c | 4 ++-- Documentation/connector/ucon.c | 2 +- MAINTAINERS | 7 +++++++ drivers/connector/cn_queue.c | 2 +- drivers/connector/connector.c | 4 ++-- 5 files changed, 13 insertions(+), 6 deletions(-) diff --git a/Documentation/connector/cn_test.c b/Documentation/connector/cn_test.c index f688eba8770..6a5be5d5c8e 100644 --- a/Documentation/connector/cn_test.c +++ b/Documentation/connector/cn_test.c @@ -1,7 +1,7 @@ /* * cn_test.c * - * 2004-2005 Copyright (c) Evgeniy Polyakov + * 2004+ Copyright (c) Evgeniy Polyakov * All rights reserved. * * This program is free software; you can redistribute it and/or modify @@ -194,5 +194,5 @@ module_init(cn_test_init); module_exit(cn_test_fini); MODULE_LICENSE("GPL"); -MODULE_AUTHOR("Evgeniy Polyakov "); +MODULE_AUTHOR("Evgeniy Polyakov "); MODULE_DESCRIPTION("Connector's test module"); diff --git a/Documentation/connector/ucon.c b/Documentation/connector/ucon.c index d738cde2a8d..c5092ad0ce4 100644 --- a/Documentation/connector/ucon.c +++ b/Documentation/connector/ucon.c @@ -1,7 +1,7 @@ /* * ucon.c * - * Copyright (c) 2004+ Evgeniy Polyakov + * Copyright (c) 2004+ Evgeniy Polyakov * * * This program is free software; you can redistribute it and/or modify diff --git a/MAINTAINERS b/MAINTAINERS index 6c6bb95acb1..88e8c00ede7 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -1569,6 +1569,13 @@ S: Supported F: fs/configfs/ F: include/linux/configfs.h +CONNECTOR +P: Evgeniy Polyakov +M: zbr@ioremap.net +L: netdev@vger.kernel.org +S: Maintained +F: drivers/connector/ + CONTROL GROUPS (CGROUPS) P: Paul Menage M: menage@google.com diff --git a/drivers/connector/cn_queue.c b/drivers/connector/cn_queue.c index c769ef269fb..408c2af25d5 100644 --- a/drivers/connector/cn_queue.c +++ b/drivers/connector/cn_queue.c @@ -1,7 +1,7 @@ /* * cn_queue.c * - * 2004-2005 Copyright (c) Evgeniy Polyakov + * 2004+ Copyright (c) Evgeniy Polyakov * All rights reserved. * * This program is free software; you can redistribute it and/or modify diff --git a/drivers/connector/connector.c b/drivers/connector/connector.c index fd336c5a905..08b2500f21e 100644 --- a/drivers/connector/connector.c +++ b/drivers/connector/connector.c @@ -1,7 +1,7 @@ /* * connector.c * - * 2004-2005 Copyright (c) Evgeniy Polyakov + * 2004+ Copyright (c) Evgeniy Polyakov * All rights reserved. * * This program is free software; you can redistribute it and/or modify @@ -33,7 +33,7 @@ #include MODULE_LICENSE("GPL"); -MODULE_AUTHOR("Evgeniy Polyakov "); +MODULE_AUTHOR("Evgeniy Polyakov "); MODULE_DESCRIPTION("Generic userspace <-> kernelspace connector."); static u32 cn_idx = CN_IDX_CONNECTOR; -- cgit v1.2.3 From ed5c8ef3bb2de277b7885072e0e981c41a022be5 Mon Sep 17 00:00:00 2001 From: Alan Jenkins Date: Sun, 19 Jul 2009 09:48:28 +0100 Subject: acer-wmi: fix rfkill conversion Fix another polarity error introduced by the rfkill rewrite, this time in acer_rfkill_set(). Signed-off-by: Alan Jenkins Signed-off-by: John W. Linville --- drivers/platform/x86/acer-wmi.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/platform/x86/acer-wmi.c b/drivers/platform/x86/acer-wmi.c index be2fd6f9163..fb45f5ee8df 100644 --- a/drivers/platform/x86/acer-wmi.c +++ b/drivers/platform/x86/acer-wmi.c @@ -973,7 +973,7 @@ static int acer_rfkill_set(void *data, bool blocked) { acpi_status status; u32 cap = (unsigned long)data; - status = set_u32(!!blocked, cap); + status = set_u32(!blocked, cap); if (ACPI_FAILURE(status)) return -ENODEV; return 0; -- cgit v1.2.3 From bfa99bfdda1ce8a60f1f0fba7a04162a66d4ecfa Mon Sep 17 00:00:00 2001 From: Dan Carpenter Date: Sun, 19 Jul 2009 21:26:13 +0200 Subject: p54spi: fix potential null deref in p54spi.c Fix a potential NULL dereference bug during error handling in p54spi_probe. This bug was discovered by smatch: (http://repo.or.cz/w/smatch.git). Signed-off-by: Dan Carpenter Signed-off-by: Christian Lamparter Signed-off-by: John W. Linville --- drivers/net/wireless/p54/p54spi.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/wireless/p54/p54spi.c b/drivers/net/wireless/p54/p54spi.c index 83116baeb11..72c7dbd39d0 100644 --- a/drivers/net/wireless/p54/p54spi.c +++ b/drivers/net/wireless/p54/p54spi.c @@ -635,7 +635,7 @@ static int __devinit p54spi_probe(struct spi_device *spi) hw = p54_init_common(sizeof(*priv)); if (!hw) { - dev_err(&priv->spi->dev, "could not alloc ieee80211_hw"); + dev_err(&spi->dev, "could not alloc ieee80211_hw"); return -ENOMEM; } -- cgit v1.2.3 From 5d2214ac5e7f72c9ae70b2444649e8d1d3e1086d Mon Sep 17 00:00:00 2001 From: "Luis R. Rodriguez" Date: Mon, 20 Jul 2009 08:32:47 -0700 Subject: ath: add support for special 0x8000 regulatory domain Two users of ar9170 devices have now reported their cards have been programmed with a regulatory domain of 0x8000. This is not a valid regulatory domain as such these users were unable to use these devices. Since this doesn't seem to be a device EEPROM corruption we must treat it specially. It may have been possible the manufacturer intended to use 0x0 as the regulatory domain and that would ultimately yield to US but since we cannot get confirmationf or this we default this special case to one of our world regulatory domains, specifically 0x64. Reported-by: DavidFreeman on #linux-wireless Reported-by: Joerg Albert Cc: Christian Lamparter , Cc: Stephen Chen Cc: David Quan Cc: Tony Yang Signed-off-by: Luis R. Rodriguez Signed-off-by: John W. Linville --- drivers/net/wireless/ath/regd.c | 17 +++++++++++++++++ 1 file changed, 17 insertions(+) diff --git a/drivers/net/wireless/ath/regd.c b/drivers/net/wireless/ath/regd.c index eef370bd121..bf3d25ba7be 100644 --- a/drivers/net/wireless/ath/regd.c +++ b/drivers/net/wireless/ath/regd.c @@ -474,6 +474,21 @@ ath_regd_init_wiphy(struct ath_regulatory *reg, return 0; } +/* + * Some users have reported their EEPROM programmed with + * 0x8000 set, this is not a supported regulatory domain + * but since we have more than one user with it we need + * a solution for them. We default to 0x64, which is the + * default Atheros world regulatory domain. + */ +static void ath_regd_sanitize(struct ath_regulatory *reg) +{ + if (reg->current_rd != COUNTRY_ERD_FLAG) + return; + printk(KERN_DEBUG "ath: EEPROM regdomain sanitized\n"); + reg->current_rd = 0x64; +} + int ath_regd_init(struct ath_regulatory *reg, struct wiphy *wiphy, @@ -486,6 +501,8 @@ ath_regd_init(struct ath_regulatory *reg, if (!reg) return -EINVAL; + ath_regd_sanitize(reg); + printk(KERN_DEBUG "ath: EEPROM regdomain: 0x%0x\n", reg->current_rd); if (!ath_regd_is_eeprom_valid(reg)) { -- cgit v1.2.3 From 154839962a582b8eb661cde94ef3af0e03b374d7 Mon Sep 17 00:00:00 2001 From: Marek Vasut Date: Thu, 16 Jul 2009 19:19:53 +0200 Subject: libertas: Fix problem with broken V4 firmware on CF8381 Firmware V4 on CF8381 reports region code shifted by 1 byte to left. The following patch checks for this and handles it properly. Signed-off-by: Marek Vasut Signed-off-by: John W. Linville --- drivers/net/wireless/libertas/cmd.c | 8 +++++++- drivers/net/wireless/libertas/defs.h | 2 ++ 2 files changed, 9 insertions(+), 1 deletion(-) diff --git a/drivers/net/wireless/libertas/cmd.c b/drivers/net/wireless/libertas/cmd.c index 01db705a38e..685098148e1 100644 --- a/drivers/net/wireless/libertas/cmd.c +++ b/drivers/net/wireless/libertas/cmd.c @@ -135,8 +135,14 @@ int lbs_update_hw_spec(struct lbs_private *priv) /* Clamp region code to 8-bit since FW spec indicates that it should * only ever be 8-bit, even though the field size is 16-bit. Some firmware * returns non-zero high 8 bits here. + * + * Firmware version 4.0.102 used in CF8381 has region code shifted. We + * need to check for this problem and handle it properly. */ - priv->regioncode = le16_to_cpu(cmd.regioncode) & 0xFF; + if (MRVL_FW_MAJOR_REV(priv->fwrelease) == MRVL_FW_V4) + priv->regioncode = (le16_to_cpu(cmd.regioncode) >> 8) & 0xFF; + else + priv->regioncode = le16_to_cpu(cmd.regioncode) & 0xFF; for (i = 0; i < MRVDRV_MAX_REGION_CODE; i++) { /* use the region code to search for the index */ diff --git a/drivers/net/wireless/libertas/defs.h b/drivers/net/wireless/libertas/defs.h index 48da157d6cd..72f3479a4d7 100644 --- a/drivers/net/wireless/libertas/defs.h +++ b/drivers/net/wireless/libertas/defs.h @@ -234,6 +234,8 @@ static inline void lbs_deb_hex(unsigned int grp, const char *prompt, u8 *buf, in /** Mesh enable bit in FW capability */ #define MESH_CAPINFO_ENABLE_MASK (1<<16) +/** FW definition from Marvell v4 */ +#define MRVL_FW_V4 (0x04) /** FW definition from Marvell v5 */ #define MRVL_FW_V5 (0x05) /** FW definition from Marvell v10 */ -- cgit v1.2.3 From 0021195c40326ac4702faf28c32accd91b331641 Mon Sep 17 00:00:00 2001 From: Julia Lawall Date: Sun, 19 Jul 2009 06:13:04 +0000 Subject: drivers/net: Move a dereference below a NULL test If the NULL test is necessary, then the dereferences should be moved below the NULL test. The semantic patch that makes this change is as follows: (http://www.emn.fr/x-info/coccinelle/) // @@ type T; expression E,E1; identifier i,fld; statement S; @@ - T i = E->fld; + T i; ... when != E=E1 when != i BUG_ON (E == NULL||...); + i = E->fld; // Signed-off-by: Julia Lawall Signed-off-by: David S. Miller --- drivers/net/ibm_newemac/rgmii.c | 7 ++++--- 1 file changed, 4 insertions(+), 3 deletions(-) diff --git a/drivers/net/ibm_newemac/rgmii.c b/drivers/net/ibm_newemac/rgmii.c index 1d5379de690..8d76cb89dbd 100644 --- a/drivers/net/ibm_newemac/rgmii.c +++ b/drivers/net/ibm_newemac/rgmii.c @@ -188,11 +188,12 @@ void rgmii_put_mdio(struct of_device *ofdev, int input) void rgmii_detach(struct of_device *ofdev, int input) { struct rgmii_instance *dev = dev_get_drvdata(&ofdev->dev); - struct rgmii_regs __iomem *p = dev->base; - - mutex_lock(&dev->lock); + struct rgmii_regs __iomem *p; BUG_ON(!dev || dev->users == 0); + p = dev->base; + + mutex_lock(&dev->lock); RGMII_DBG(dev, "detach(%d)" NL, input); -- cgit v1.2.3 From 0376d5b25ef11e9b6450ebae20781a32d8985170 Mon Sep 17 00:00:00 2001 From: Julia Lawall Date: Sun, 19 Jul 2009 05:26:35 +0000 Subject: drivers/net: Move a dereference below a NULL test If the NULL test is necessary, then the dereference should be moved below the NULL test. The semantic patch that makes this change is as follows: (http://www.emn.fr/x-info/coccinelle/) // @@ type T; expression E,E1; identifier i,fld; statement S; @@ - T i = E->fld; + T i; ... when != E=E1 when != i if (E == NULL||...) S + i = E->fld; // Signed-off-by: Julia Lawall Signed-off-by: David S. Miller --- drivers/net/bnx2x_link.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/net/bnx2x_link.c b/drivers/net/bnx2x_link.c index ed648acef7c..2ee581a2cde 100644 --- a/drivers/net/bnx2x_link.c +++ b/drivers/net/bnx2x_link.c @@ -4212,13 +4212,14 @@ static void bnx2x_turn_off_sf(struct bnx2x *bp, u8 port) u8 bnx2x_get_ext_phy_fw_version(struct link_params *params, u8 driver_loaded, u8 *version, u16 len) { - struct bnx2x *bp = params->bp; + struct bnx2x *bp; u32 ext_phy_type = 0; u32 spirom_ver = 0; u8 status = 0 ; if (version == NULL || params == NULL) return -EINVAL; + bp = params->bp; spirom_ver = REG_RD(bp, params->shmem_base + offsetof(struct shmem_region, -- cgit v1.2.3 From 86669530d966ca21f4245b9990e7ae188d433d1e Mon Sep 17 00:00:00 2001 From: Julia Lawall Date: Sun, 19 Jul 2009 06:09:25 +0000 Subject: drivers/net/mlx4: Adjust constant The values in the advertising field are typically ADVERTISED_xxx, not SUPPORTED_xxx. Both SUPPORTED_10000baseT_Full and ADVERTISED_1000baseT_Full have the same value. The semantic match that finds this problem is as follows: (http://www.emn.fr/x-info/coccinelle/) // @@ struct ethtool_cmd E; @@ *E.advertising = SUPPORTED_10000baseT_Full // Signed-off-by: Julia Lawall Signed-off-by: David S. Miller --- drivers/net/mlx4/en_ethtool.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/mlx4/en_ethtool.c b/drivers/net/mlx4/en_ethtool.c index 091f99052c9..86467b444ac 100644 --- a/drivers/net/mlx4/en_ethtool.c +++ b/drivers/net/mlx4/en_ethtool.c @@ -220,7 +220,7 @@ static int mlx4_en_get_settings(struct net_device *dev, struct ethtool_cmd *cmd) { cmd->autoneg = AUTONEG_DISABLE; cmd->supported = SUPPORTED_10000baseT_Full; - cmd->advertising = SUPPORTED_10000baseT_Full; + cmd->advertising = ADVERTISED_1000baseT_Full; if (netif_carrier_ok(dev)) { cmd->speed = SPEED_10000; cmd->duplex = DUPLEX_FULL; -- cgit v1.2.3 From b64aec8d1e1d8482a7b6cca60c8105c756bf1fe4 Mon Sep 17 00:00:00 2001 From: Trond Myklebust Date: Tue, 21 Jul 2009 16:47:46 -0400 Subject: NFSv4: Fix an Oops in nfs4_free_lock_state The oops http://www.kerneloops.org/raw.php?rawid=537858&msgid= appears to be due to the nfs4_lock_state->ls_state field being uninitialised. This happens if the call to nfs4_free_lock_state() is triggered at the end of nfs4_get_lock_state(). The fix is to move the initialisation of ls_state into the allocator. Signed-off-by: Trond Myklebust --- fs/nfs/nfs4state.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/fs/nfs/nfs4state.c b/fs/nfs/nfs4state.c index b73c5a72865..65ca8c18476 100644 --- a/fs/nfs/nfs4state.c +++ b/fs/nfs/nfs4state.c @@ -553,6 +553,7 @@ static struct nfs4_lock_state *nfs4_alloc_lock_state(struct nfs4_state *state, f INIT_LIST_HEAD(&lsp->ls_sequence.list); lsp->ls_seqid.sequence = &lsp->ls_sequence; atomic_set(&lsp->ls_count, 1); + lsp->ls_state = state; lsp->ls_owner = fl_owner; spin_lock(&clp->cl_lock); nfs_alloc_unique_id(&clp->cl_lockowner_id, &lsp->ls_id, 1, 64); @@ -587,7 +588,6 @@ static struct nfs4_lock_state *nfs4_get_lock_state(struct nfs4_state *state, fl_ if (lsp != NULL) break; if (new != NULL) { - new->ls_state = state; list_add(&new->ls_locks, &state->lock_states); set_bit(LK_STATE_IN_USE, &state->flags); lsp = new; -- cgit v1.2.3 From fccba8045537f7e840d0e7565e1989d465e488a3 Mon Sep 17 00:00:00 2001 From: Trond Myklebust Date: Tue, 21 Jul 2009 16:48:07 -0400 Subject: NFSv4: Fix an NFSv4 mount regression Commit 008f55d0e019943323c20a03493a2ba5672a4cc8 (nfs41: recover lease in _nfs4_lookup_root) forces the state manager to always run on mount. This is a bug in the case of NFSv4.0, which doesn't require us to send a setclientid until we want to grab file state. In any case, this is completely the wrong place to be doing state management. Moving that code into nfs4_init_session... Signed-off-by: Trond Myklebust --- fs/nfs/client.c | 18 +++--------------- fs/nfs/nfs4_fs.h | 6 ++++++ fs/nfs/nfs4proc.c | 24 +++++++++++++++++------- 3 files changed, 26 insertions(+), 22 deletions(-) diff --git a/fs/nfs/client.c b/fs/nfs/client.c index c2d061675d8..8d25ccb2d51 100644 --- a/fs/nfs/client.c +++ b/fs/nfs/client.c @@ -1242,20 +1242,6 @@ error: return error; } -/* - * Initialize a session. - * Note: save the mount rsize and wsize for create_server negotiation. - */ -static void nfs4_init_session(struct nfs_client *clp, - unsigned int wsize, unsigned int rsize) -{ -#if defined(CONFIG_NFS_V4_1) - if (nfs4_has_session(clp)) { - clp->cl_session->fc_attrs.max_rqst_sz = wsize; - clp->cl_session->fc_attrs.max_resp_sz = rsize; - } -#endif /* CONFIG_NFS_V4_1 */ -} /* * Session has been established, and the client marked ready. @@ -1350,7 +1336,9 @@ struct nfs_server *nfs4_create_server(const struct nfs_parsed_mount_data *data, BUG_ON(!server->nfs_client->rpc_ops); BUG_ON(!server->nfs_client->rpc_ops->file_inode_ops); - nfs4_init_session(server->nfs_client, server->wsize, server->rsize); + error = nfs4_init_session(server); + if (error < 0) + goto error; /* Probe the root fh to retrieve its FSID */ error = nfs4_path_walk(server, mntfh, data->nfs_server.export_path); diff --git a/fs/nfs/nfs4_fs.h b/fs/nfs/nfs4_fs.h index 61bc3a32e1e..6ea07a3c75d 100644 --- a/fs/nfs/nfs4_fs.h +++ b/fs/nfs/nfs4_fs.h @@ -220,6 +220,7 @@ extern void nfs4_destroy_session(struct nfs4_session *session); extern struct nfs4_session *nfs4_alloc_session(struct nfs_client *clp); extern int nfs4_proc_create_session(struct nfs_client *, int reset); extern int nfs4_proc_destroy_session(struct nfs4_session *); +extern int nfs4_init_session(struct nfs_server *server); #else /* CONFIG_NFS_v4_1 */ static inline int nfs4_setup_sequence(struct nfs_client *clp, struct nfs4_sequence_args *args, struct nfs4_sequence_res *res, @@ -227,6 +228,11 @@ static inline int nfs4_setup_sequence(struct nfs_client *clp, { return 0; } + +static inline int nfs4_init_session(struct nfs_server *server) +{ + return 0; +} #endif /* CONFIG_NFS_V4_1 */ extern struct nfs4_state_maintenance_ops *nfs4_state_renewal_ops[]; diff --git a/fs/nfs/nfs4proc.c b/fs/nfs/nfs4proc.c index ff0c080db59..df24f67bca6 100644 --- a/fs/nfs/nfs4proc.c +++ b/fs/nfs/nfs4proc.c @@ -2040,15 +2040,9 @@ static int _nfs4_lookup_root(struct nfs_server *server, struct nfs_fh *fhandle, .rpc_argp = &args, .rpc_resp = &res, }; - int status; nfs_fattr_init(info->fattr); - status = nfs4_recover_expired_lease(server); - if (!status) - status = nfs4_check_client_ready(server->nfs_client); - if (!status) - status = nfs4_call_sync(server, &msg, &args, &res, 0); - return status; + return nfs4_call_sync(server, &msg, &args, &res, 0); } static int nfs4_lookup_root(struct nfs_server *server, struct nfs_fh *fhandle, @@ -4793,6 +4787,22 @@ int nfs4_proc_destroy_session(struct nfs4_session *session) return status; } +int nfs4_init_session(struct nfs_server *server) +{ + struct nfs_client *clp = server->nfs_client; + int ret; + + if (!nfs4_has_session(clp)) + return 0; + + clp->cl_session->fc_attrs.max_rqst_sz = server->wsize; + clp->cl_session->fc_attrs.max_resp_sz = server->rsize; + ret = nfs4_recover_expired_lease(server); + if (!ret) + ret = nfs4_check_client_ready(clp); + return ret; +} + /* * Renew the cl_session lease. */ -- cgit v1.2.3 From 429b2b319af3987e808c18f6b81313104caf782c Mon Sep 17 00:00:00 2001 From: Andi Kleen Date: Sat, 18 Jul 2009 08:56:57 +0200 Subject: x86-64: Fix bad_srat() to clear all state Need to clear both nodes and nodes_add state for start/end. Signed-off-by: Andi Kleen LKML-Reference: <20090718065657.GA2898@basil.fritz.box> Signed-off-by: H. Peter Anvin Cc: stable@kernel.org --- arch/x86/mm/srat_64.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) diff --git a/arch/x86/mm/srat_64.c b/arch/x86/mm/srat_64.c index 2dfcbf9df2a..dbb5381f7b3 100644 --- a/arch/x86/mm/srat_64.c +++ b/arch/x86/mm/srat_64.c @@ -79,8 +79,10 @@ static __init void bad_srat(void) acpi_numa = -1; for (i = 0; i < MAX_LOCAL_APIC; i++) apicid_to_node[i] = NUMA_NO_NODE; - for (i = 0; i < MAX_NUMNODES; i++) - nodes_add[i].start = nodes[i].end = 0; + for (i = 0; i < MAX_NUMNODES; i++) { + nodes[i].start = nodes[i].end = 0; + nodes_add[i].start = nodes_add[i].end = 0; + } remove_all_active_ranges(); } -- cgit v1.2.3 From d953126a28f97ec965d23c69fd5795854c048f30 Mon Sep 17 00:00:00 2001 From: Trond Myklebust Date: Tue, 21 Jul 2009 19:22:38 -0400 Subject: NFSv4: Fix a problem whereby a buggy server can oops the kernel We just had a case in which a buggy server occasionally returns the wrong attributes during an OPEN call. While the client does catch this sort of condition in nfs4_open_done(), and causes the nfs4_atomic_open() to return -EISDIR, the logic in nfs_atomic_lookup() is broken, since it causes a fallback to an ordinary lookup instead of just returning the error. When the buggy server then returns a regular file for the fallback lookup, the VFS allows the open, and bad things start to happen, since the open file doesn't have any associated NFSv4 state. The fix is firstly to return the EISDIR/ENOTDIR errors immediately, and secondly to ensure that we are always careful when dereferencing the nfs_open_context state pointer. Signed-off-by: Trond Myklebust --- fs/nfs/dir.c | 2 +- fs/nfs/nfs4proc.c | 16 ++++++++++++---- 2 files changed, 13 insertions(+), 5 deletions(-) diff --git a/fs/nfs/dir.c b/fs/nfs/dir.c index 38d42c29fb9..32062c33c85 100644 --- a/fs/nfs/dir.c +++ b/fs/nfs/dir.c @@ -1025,12 +1025,12 @@ static struct dentry *nfs_atomic_lookup(struct inode *dir, struct dentry *dentry res = NULL; goto out; /* This turned out not to be a regular file */ - case -EISDIR: case -ENOTDIR: goto no_open; case -ELOOP: if (!(nd->intent.open.flags & O_NOFOLLOW)) goto no_open; + /* case -EISDIR: */ /* case -EINVAL: */ default: goto out; diff --git a/fs/nfs/nfs4proc.c b/fs/nfs/nfs4proc.c index df24f67bca6..6917311f201 100644 --- a/fs/nfs/nfs4proc.c +++ b/fs/nfs/nfs4proc.c @@ -4093,15 +4093,23 @@ nfs4_proc_lock(struct file *filp, int cmd, struct file_lock *request) if (request->fl_start < 0 || request->fl_end < 0) return -EINVAL; - if (IS_GETLK(cmd)) - return nfs4_proc_getlk(state, F_GETLK, request); + if (IS_GETLK(cmd)) { + if (state != NULL) + return nfs4_proc_getlk(state, F_GETLK, request); + return 0; + } if (!(IS_SETLK(cmd) || IS_SETLKW(cmd))) return -EINVAL; - if (request->fl_type == F_UNLCK) - return nfs4_proc_unlck(state, cmd, request); + if (request->fl_type == F_UNLCK) { + if (state != NULL) + return nfs4_proc_unlck(state, cmd, request); + return 0; + } + if (state == NULL) + return -ENOLCK; do { status = nfs4_proc_setlk(state, cmd, request); if ((status != -EAGAIN) || IS_SETLK(cmd)) -- cgit v1.2.3 From bc146d23d1358af43f03793c3ad8c9f16bbcffcb Mon Sep 17 00:00:00 2001 From: Maxime Bizon Date: Thu, 16 Jul 2009 06:32:52 +0000 Subject: ide: fix memory leak when flush command is issued I'm using ide on 2.6.30.1 with xfs filesystem. I noticed a kernel memory leak after writing lots of data, the kmalloc-96 slab cache keeps growing. It seems the struct ide_cmd kmalloced by idedisk_prepare_flush is never kfreed. Commit a09485df9cda49fbde2766c86eb18a9cae585162 ("ide: move request type specific code from ide_end_drive_cmd() to callers (v3)") and f505d49ffd25ed062e76ffd17568d3937fcd338c ("ide: fix barriers support") cause this regression, cmd->rq must now be set for ide_complete_cmd to honor the IDE_TFLAG_DYN flag. Signed-off-by: Maxime Bizon Acked-by: Bartlomiej Zolnierkiewicz Signed-off-by: David S. Miller --- drivers/ide/ide-disk.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/ide/ide-disk.c b/drivers/ide/ide-disk.c index 695181120cd..7f878017b73 100644 --- a/drivers/ide/ide-disk.c +++ b/drivers/ide/ide-disk.c @@ -455,6 +455,7 @@ static void idedisk_prepare_flush(struct request_queue *q, struct request *rq) rq->cmd_type = REQ_TYPE_ATA_TASKFILE; rq->special = cmd; + cmd->rq = rq; } ide_devset_get(multcount, mult_count); -- cgit v1.2.3 From 2fc2111c2729462b99b6e37f39a48917054776f5 Mon Sep 17 00:00:00 2001 From: Michael Buesch Date: Sun, 19 Jul 2009 09:15:19 +0000 Subject: ide-tape: Don't leak kernel stack information Don't leak kernel stack information through uninitialized structure members. Signed-off-by: Michael Buesch Acked-by: Borislav Petkov . Signed-off-by: David S. Miller --- drivers/ide/ide-tape.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/ide/ide-tape.c b/drivers/ide/ide-tape.c index 013dc595fab..bc5fb12b913 100644 --- a/drivers/ide/ide-tape.c +++ b/drivers/ide/ide-tape.c @@ -1064,6 +1064,7 @@ static int idetape_blkdev_ioctl(ide_drive_t *drive, unsigned int cmd, tape->best_dsc_rw_freq = config.dsc_rw_frequency; break; case 0x0350: + memset(&config, 0, sizeof(config)); config.dsc_rw_frequency = (int) tape->best_dsc_rw_freq; config.nr_stages = 1; if (copy_to_user(argp, &config, sizeof(config))) -- cgit v1.2.3 From a947a39d52f5b647a2fd5eca55d39e722a2fa90f Mon Sep 17 00:00:00 2001 From: Mike McCormack Date: Tue, 21 Jul 2009 20:57:56 -0700 Subject: sky2: Avoid races in sky2_down Reset rx chain before trying to drain it. Shut interrupts off last, incase there's something to report. Signed-off-by: Mike McCormack Acked-by: Stephen Hemminger Signed-off-by: David S. Miller --- drivers/net/sky2.c | 16 ++++++++-------- 1 file changed, 8 insertions(+), 8 deletions(-) diff --git a/drivers/net/sky2.c b/drivers/net/sky2.c index ba768dfa59e..3550c5dcd93 100644 --- a/drivers/net/sky2.c +++ b/drivers/net/sky2.c @@ -1818,12 +1818,6 @@ static int sky2_down(struct net_device *dev) if (netif_msg_ifdown(sky2)) printk(KERN_INFO PFX "%s: disabling interface\n", dev->name); - /* Disable port IRQ */ - imask = sky2_read32(hw, B0_IMSK); - imask &= ~portirq_msk[port]; - sky2_write32(hw, B0_IMSK, imask); - sky2_read32(hw, B0_IMSK); - /* Force flow control off */ sky2_write8(hw, SK_REG(port, GMAC_CTRL), GMC_PAUSE_OFF); @@ -1863,8 +1857,6 @@ static int sky2_down(struct net_device *dev) sky2_write32(hw, RB_ADDR(txqaddr[port], RB_CTRL), RB_RST_SET); - sky2_rx_stop(sky2); - sky2_write8(hw, SK_REG(port, RX_GMF_CTRL_T), GMF_RST_SET); sky2_write8(hw, SK_REG(port, TX_GMF_CTRL_T), GMF_RST_SET); @@ -1874,6 +1866,14 @@ static int sky2_down(struct net_device *dev) sky2_write32(hw, STAT_ISR_TIMER_CNT, 0); sky2_read8(hw, STAT_ISR_TIMER_CTRL); + sky2_rx_stop(sky2); + + /* Disable port IRQ */ + imask = sky2_read32(hw, B0_IMSK); + imask &= ~portirq_msk[port]; + sky2_write32(hw, B0_IMSK, imask); + sky2_read32(hw, B0_IMSK); + synchronize_irq(hw->pdev->irq); napi_synchronize(&hw->napi); -- cgit v1.2.3 From 6effa8f6fc786f00e3a23eae605e0f2e8e748faa Mon Sep 17 00:00:00 2001 From: Hidehiro Kawai Date: Wed, 22 Jul 2009 11:56:20 +0900 Subject: x86, mce: Rename incorrect macro name "CONFIG_X86_THRESHOLD" CONFIG_X86_THRESHOLD used in arch/x86/kernel/irqinit.c is always undefined. Rename it to the correct name "CONFIG_X86_MCE_THRESHOLD". Signed-off-by: Hidehiro Kawai Reviewed-by: Hidetoshi Seto Cc: Andi Kleen LKML-Reference: <4A667FD4.3010509@hitachi.com> Signed-off-by: H. Peter Anvin --- arch/x86/kernel/irqinit.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/x86/kernel/irqinit.c b/arch/x86/kernel/irqinit.c index 696f0e475c2..92b7703d3d5 100644 --- a/arch/x86/kernel/irqinit.c +++ b/arch/x86/kernel/irqinit.c @@ -187,7 +187,7 @@ static void __init apic_intr_init(void) #ifdef CONFIG_X86_THERMAL_VECTOR alloc_intr_gate(THERMAL_APIC_VECTOR, thermal_interrupt); #endif -#ifdef CONFIG_X86_THRESHOLD +#ifdef CONFIG_X86_MCE_THRESHOLD alloc_intr_gate(THRESHOLD_APIC_VECTOR, threshold_interrupt); #endif #if defined(CONFIG_X86_NEW_MCE) && defined(CONFIG_X86_LOCAL_APIC) -- cgit v1.2.3 From 79452f0a28aa5a40522c487b42a5fc423647ad98 Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Wed, 22 Jul 2009 12:51:51 +0200 Subject: ALSA: pcm - Fix regressions with VMware VMware tends to report PCM positions and period updates at utterly wrong timing. This screws up the recent PCM core code that tries to correct the position based on the irq timing. Now, when a backward irq position is detected, skip the update instead of rebasing. (This is almost the old behavior before 2.6.30.) Signed-off-by: Takashi Iwai --- sound/core/pcm_lib.c | 11 ++++++++++- 1 file changed, 10 insertions(+), 1 deletion(-) diff --git a/sound/core/pcm_lib.c b/sound/core/pcm_lib.c index 333e4dd2945..3b673e2f991 100644 --- a/sound/core/pcm_lib.c +++ b/sound/core/pcm_lib.c @@ -244,18 +244,27 @@ static int snd_pcm_update_hw_ptr_interrupt(struct snd_pcm_substream *substream) delta = new_hw_ptr - hw_ptr_interrupt; } if (delta < 0) { - delta += runtime->buffer_size; + if (runtime->periods == 1) + delta += runtime->buffer_size; if (delta < 0) { hw_ptr_error(substream, "Unexpected hw_pointer value " "(stream=%i, pos=%ld, intr_ptr=%ld)\n", substream->stream, (long)pos, (long)hw_ptr_interrupt); +#if 1 + /* simply skipping the hwptr update seems more + * robust in some cases, e.g. on VMware with + * inaccurate timer source + */ + return 0; /* skip this update */ +#else /* rebase to interrupt position */ hw_base = new_hw_ptr = hw_ptr_interrupt; /* align hw_base to buffer_size */ hw_base -= hw_base % runtime->buffer_size; delta = 0; +#endif } else { hw_base += runtime->buffer_size; if (hw_base >= runtime->boundary) -- cgit v1.2.3 From 2cf313ee75ddf6220b5d623b749b1bb79458307f Mon Sep 17 00:00:00 2001 From: Alexey Fisher Date: Wed, 22 Jul 2009 14:57:54 +0200 Subject: ALSA: usb-audio - Volume control quirk for QuickCam E 3500 - E3500 report cval->max more than it actually can handel, so if you set 95% capture level it will be silently muted. - Betwen cval->min and cval-max(real) is 2940 control units, but real are only 7 with cval->res = 384. - Alsa can't handel less than 10 controls, so make it more and set cval->res = 192. Signed-off-by: Alexey Fisher Signed-off-by: Takashi Iwai --- sound/usb/usbmixer.c | 25 ++++++++++++++++++++----- 1 file changed, 20 insertions(+), 5 deletions(-) diff --git a/sound/usb/usbmixer.c b/sound/usb/usbmixer.c index 4bd3a7a0edc..ec9cdf98692 100644 --- a/sound/usb/usbmixer.c +++ b/sound/usb/usbmixer.c @@ -990,20 +990,35 @@ static void build_feature_ctl(struct mixer_build *state, unsigned char *desc, break; } - /* quirk for UDA1321/N101 */ - /* note that detection between firmware 2.1.1.7 (N101) and later 2.1.1.21 */ - /* is not very clear from datasheets */ - /* I hope that the min value is -15360 for newer firmware --jk */ + /* volume control quirks */ switch (state->chip->usb_id) { case USB_ID(0x0471, 0x0101): case USB_ID(0x0471, 0x0104): case USB_ID(0x0471, 0x0105): case USB_ID(0x0672, 0x1041): + /* quirk for UDA1321/N101. + * note that detection between firmware 2.1.1.7 (N101) + * and later 2.1.1.21 is not very clear from datasheets. + * I hope that the min value is -15360 for newer firmware --jk + */ if (!strcmp(kctl->id.name, "PCM Playback Volume") && cval->min == -15616) { - snd_printk(KERN_INFO "using volume control quirk for the UDA1321/N101 chip\n"); + snd_printk(KERN_INFO + "set volume quirk for UDA1321/N101 chip\n"); cval->max = -256; } + break; + + case USB_ID(0x046d, 0x09a4): + if (!strcmp(kctl->id.name, "Mic Capture Volume")) { + snd_printk(KERN_INFO + "set volume quirk for QuickCam E3500\n"); + cval->min = 6080; + cval->max = 8768; + cval->res = 192; + } + break; + } snd_printdd(KERN_INFO "[%d] FU [%s] ch = %d, val = %d/%d/%d\n", -- cgit v1.2.3 From 1bec1aed1e7e632b3cc43b6807c2b4dcd1572e28 Mon Sep 17 00:00:00 2001 From: Yan Zheng Date: Wed, 22 Jul 2009 09:59:00 -0400 Subject: Btrfs: fix definition of struct btrfs_extent_inline_ref use __le64 instead of u64 in on-disk structure definition. Signed-off-by: Yan Zheng Signed-off-by: Chris Mason --- fs/btrfs/ctree.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/fs/btrfs/ctree.h b/fs/btrfs/ctree.h index a404ecc53eb..da0763135bf 100644 --- a/fs/btrfs/ctree.h +++ b/fs/btrfs/ctree.h @@ -483,7 +483,7 @@ struct btrfs_shared_data_ref { struct btrfs_extent_inline_ref { u8 type; - u64 offset; + __le64 offset; } __attribute__ ((__packed__)); /* old style backrefs item */ -- cgit v1.2.3 From bf1fb512a58d7aeb41aaa40d6d2d2d29e08e506a Mon Sep 17 00:00:00 2001 From: Yan Zheng Date: Wed, 22 Jul 2009 09:59:00 -0400 Subject: Btrfs: properly update space information after shrinking device. Change 'goto done' to 'break' for the case of all device extents have been freed, so that the code updates space information will be execute. Signed-off-by: Yan Zheng Signed-off-by: Chris Mason --- fs/btrfs/volumes.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/fs/btrfs/volumes.c b/fs/btrfs/volumes.c index 3ab80e9cd76..f057730a72b 100644 --- a/fs/btrfs/volumes.c +++ b/fs/btrfs/volumes.c @@ -2007,7 +2007,7 @@ int btrfs_shrink_device(struct btrfs_device *device, u64 new_size) goto done; if (ret) { ret = 0; - goto done; + break; } l = path->nodes[0]; @@ -2015,7 +2015,7 @@ int btrfs_shrink_device(struct btrfs_device *device, u64 new_size) btrfs_item_key_to_cpu(l, &key, path->slots[0]); if (key.objectid != device->devid) - goto done; + break; dev_extent = btrfs_item_ptr(l, slot, struct btrfs_dev_extent); length = btrfs_dev_extent_length(l, dev_extent); -- cgit v1.2.3 From e457afec60fdbd86b963d36f4a8a9285088c6043 Mon Sep 17 00:00:00 2001 From: Yan Zheng Date: Wed, 22 Jul 2009 09:59:00 -0400 Subject: Btrfs: fix double increment of path->slots[0] in btrfs_next_leaf if 1 is returned by btrfs_search_slot, the path already points to the first item with 'key > searching key'. So increasing path->slots[0] by one is superfluous in that case. Signed-off-by: Yan Zheng Signed-off-by: Chris Mason --- fs/btrfs/ctree.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/fs/btrfs/ctree.c b/fs/btrfs/ctree.c index 60a45f3a4e9..7bb66c65ddf 100644 --- a/fs/btrfs/ctree.c +++ b/fs/btrfs/ctree.c @@ -4146,7 +4146,8 @@ again: * advance the path if there are now more items available. */ if (nritems > 0 && path->slots[0] < nritems - 1) { - path->slots[0]++; + if (ret == 0) + path->slots[0]++; ret = 0; goto done; } -- cgit v1.2.3 From 33c66f430bfa3a033e70470e4c93f967156b696d Mon Sep 17 00:00:00 2001 From: Yan Zheng Date: Wed, 22 Jul 2009 09:59:00 -0400 Subject: Btrfs: fix locking issue in btrfs_find_next_key When walking up the tree, btrfs_find_next_key assumes the upper level tree block is properly locked. This isn't always true even path->keep_locks is 1. This is because btrfs_find_next_key may advance path->slots[] several times instead of only once. When 'path->slots[level] >= btrfs_header_nritems(path->nodes[level])' is found, we can't guarantee the original value of 'path->slots[level]' is 'btrfs_header_nritems(path->nodes[level]) - 1'. If it's not, the tree block at 'level + 1' isn't locked. This patch fixes the issue by explicitly checking the locking state, re-searching the tree if it's not locked. Signed-off-by: Yan Zheng Signed-off-by: Chris Mason --- fs/btrfs/ctree.c | 95 +++++++++++++++++++++++++++++++++------------------ fs/btrfs/relocation.c | 3 ++ 2 files changed, 65 insertions(+), 33 deletions(-) diff --git a/fs/btrfs/ctree.c b/fs/btrfs/ctree.c index 7bb66c65ddf..fdd423a550d 100644 --- a/fs/btrfs/ctree.c +++ b/fs/btrfs/ctree.c @@ -1701,6 +1701,7 @@ int btrfs_search_slot(struct btrfs_trans_handle *trans, struct btrfs_root struct extent_buffer *b; int slot; int ret; + int err; int level; int lowest_unlock = 1; u8 lowest_level = 0; @@ -1737,8 +1738,6 @@ again: p->locks[level] = 1; if (cow) { - int wret; - /* * if we don't really need to cow this block * then we don't want to set the path blocking, @@ -1749,12 +1748,12 @@ again: btrfs_set_path_blocking(p); - wret = btrfs_cow_block(trans, root, b, - p->nodes[level + 1], - p->slots[level + 1], &b); - if (wret) { + err = btrfs_cow_block(trans, root, b, + p->nodes[level + 1], + p->slots[level + 1], &b); + if (err) { free_extent_buffer(b); - ret = wret; + ret = err; goto done; } } @@ -1793,41 +1792,45 @@ cow_done: ret = bin_search(b, key, level, &slot); if (level != 0) { - if (ret && slot > 0) + int dec = 0; + if (ret && slot > 0) { + dec = 1; slot -= 1; + } p->slots[level] = slot; - ret = setup_nodes_for_search(trans, root, p, b, level, + err = setup_nodes_for_search(trans, root, p, b, level, ins_len); - if (ret == -EAGAIN) + if (err == -EAGAIN) goto again; - else if (ret) + if (err) { + ret = err; goto done; + } b = p->nodes[level]; slot = p->slots[level]; unlock_up(p, level, lowest_unlock); - /* this is only true while dropping a snapshot */ if (level == lowest_level) { - ret = 0; + if (dec) + p->slots[level]++; goto done; } - ret = read_block_for_search(trans, root, p, + err = read_block_for_search(trans, root, p, &b, level, slot, key); - if (ret == -EAGAIN) + if (err == -EAGAIN) goto again; - - if (ret == -EIO) + if (err) { + ret = err; goto done; + } if (!p->skip_locking) { - int lret; - btrfs_clear_path_blocking(p, NULL); - lret = btrfs_try_spin_lock(b); + err = btrfs_try_spin_lock(b); - if (!lret) { + if (!err) { btrfs_set_path_blocking(p); btrfs_tree_lock(b); btrfs_clear_path_blocking(p, b); @@ -1837,16 +1840,14 @@ cow_done: p->slots[level] = slot; if (ins_len > 0 && btrfs_leaf_free_space(root, b) < ins_len) { - int sret; - btrfs_set_path_blocking(p); - sret = split_leaf(trans, root, key, - p, ins_len, ret == 0); + err = split_leaf(trans, root, key, + p, ins_len, ret == 0); btrfs_clear_path_blocking(p, NULL); - BUG_ON(sret > 0); - if (sret) { - ret = sret; + BUG_ON(err > 0); + if (err) { + ret = err; goto done; } } @@ -4042,10 +4043,9 @@ out: * calling this function. */ int btrfs_find_next_key(struct btrfs_root *root, struct btrfs_path *path, - struct btrfs_key *key, int lowest_level, + struct btrfs_key *key, int level, int cache_only, u64 min_trans) { - int level = lowest_level; int slot; struct extent_buffer *c; @@ -4058,11 +4058,40 @@ int btrfs_find_next_key(struct btrfs_root *root, struct btrfs_path *path, c = path->nodes[level]; next: if (slot >= btrfs_header_nritems(c)) { - level++; - if (level == BTRFS_MAX_LEVEL) + int ret; + int orig_lowest; + struct btrfs_key cur_key; + if (level + 1 >= BTRFS_MAX_LEVEL || + !path->nodes[level + 1]) return 1; - continue; + + if (path->locks[level + 1]) { + level++; + continue; + } + + slot = btrfs_header_nritems(c) - 1; + if (level == 0) + btrfs_item_key_to_cpu(c, &cur_key, slot); + else + btrfs_node_key_to_cpu(c, &cur_key, slot); + + orig_lowest = path->lowest_level; + btrfs_release_path(root, path); + path->lowest_level = level; + ret = btrfs_search_slot(NULL, root, &cur_key, path, + 0, 0); + path->lowest_level = orig_lowest; + if (ret < 0) + return ret; + + c = path->nodes[level]; + slot = path->slots[level]; + if (ret == 0) + slot++; + goto next; } + if (level == 0) btrfs_item_key_to_cpu(c, key, slot); else { diff --git a/fs/btrfs/relocation.c b/fs/btrfs/relocation.c index 00839793477..e71264d1c2c 100644 --- a/fs/btrfs/relocation.c +++ b/fs/btrfs/relocation.c @@ -670,6 +670,8 @@ again: err = ret; goto out; } + if (ret > 0 && path2->slots[level] > 0) + path2->slots[level]--; eb = path2->nodes[level]; WARN_ON(btrfs_node_blockptr(eb, path2->slots[level]) != @@ -1609,6 +1611,7 @@ static noinline_for_stack int merge_reloc_root(struct reloc_control *rc, BUG_ON(level == 0); path->lowest_level = level; ret = btrfs_search_slot(NULL, reloc_root, &key, path, 0, 0); + path->lowest_level = 0; if (ret < 0) { btrfs_free_path(path); return ret; -- cgit v1.2.3 From 86de7416600e93835eeacee379aea939b6a0917a Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Wed, 22 Jul 2009 16:02:46 +0200 Subject: ALSA: hda - Use snprintf() to be safer Use snprint() for creating the jack name string instead of sprintf() in patch_sigmatel.c. Signed-off-by: Takashi Iwai --- sound/pci/hda/patch_sigmatel.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/sound/pci/hda/patch_sigmatel.c b/sound/pci/hda/patch_sigmatel.c index da7f9f65c04..512f3b9b9a4 100644 --- a/sound/pci/hda/patch_sigmatel.c +++ b/sound/pci/hda/patch_sigmatel.c @@ -4066,7 +4066,7 @@ static int stac92xx_add_jack(struct hda_codec *codec, jack->nid = nid; jack->type = type; - sprintf(name, "%s at %s %s Jack", + snprintf(name, sizeof(name), "%s at %s %s Jack", snd_hda_get_jack_type(def_conf), snd_hda_get_jack_connectivity(def_conf), snd_hda_get_jack_location(def_conf)); -- cgit v1.2.3 From 4a8c9a62d7f7f058eed4b8a6f2c890a887778093 Mon Sep 17 00:00:00 2001 From: Yan Zheng Date: Wed, 22 Jul 2009 10:07:05 -0400 Subject: Btrfs: make sure all dirty blocks are written at commit time Write dirty block groups may allocate new block, and so may add new delayed back ref. btrfs_run_delayed_refs may make some block groups dirty. commit_cowonly_roots does not handle the recursion properly, and some dirty blocks can be left unwritten at commit time. This patch moves btrfs_run_delayed_refs into the loop that writes dirty block groups, and makes the code not break out of the loop until there are no dirty block groups or delayed back refs. Signed-off-by: Yan Zheng Signed-off-by: Chris Mason --- fs/btrfs/extent-tree.c | 70 +++++++++++++++++++++++++++++--------------------- fs/btrfs/transaction.c | 9 +------ 2 files changed, 42 insertions(+), 37 deletions(-) diff --git a/fs/btrfs/extent-tree.c b/fs/btrfs/extent-tree.c index a5aca3997d4..62a332d34fd 100644 --- a/fs/btrfs/extent-tree.c +++ b/fs/btrfs/extent-tree.c @@ -2387,13 +2387,29 @@ fail: } +static struct btrfs_block_group_cache * +next_block_group(struct btrfs_root *root, + struct btrfs_block_group_cache *cache) +{ + struct rb_node *node; + spin_lock(&root->fs_info->block_group_cache_lock); + node = rb_next(&cache->cache_node); + btrfs_put_block_group(cache); + if (node) { + cache = rb_entry(node, struct btrfs_block_group_cache, + cache_node); + atomic_inc(&cache->count); + } else + cache = NULL; + spin_unlock(&root->fs_info->block_group_cache_lock); + return cache; +} + int btrfs_write_dirty_block_groups(struct btrfs_trans_handle *trans, struct btrfs_root *root) { - struct btrfs_block_group_cache *cache, *entry; - struct rb_node *n; + struct btrfs_block_group_cache *cache; int err = 0; - int werr = 0; struct btrfs_path *path; u64 last = 0; @@ -2402,39 +2418,35 @@ int btrfs_write_dirty_block_groups(struct btrfs_trans_handle *trans, return -ENOMEM; while (1) { - cache = NULL; - spin_lock(&root->fs_info->block_group_cache_lock); - for (n = rb_first(&root->fs_info->block_group_cache_tree); - n; n = rb_next(n)) { - entry = rb_entry(n, struct btrfs_block_group_cache, - cache_node); - if (entry->dirty) { - cache = entry; - break; - } + if (last == 0) { + err = btrfs_run_delayed_refs(trans, root, + (unsigned long)-1); + BUG_ON(err); } - spin_unlock(&root->fs_info->block_group_cache_lock); - if (!cache) - break; + cache = btrfs_lookup_first_block_group(root->fs_info, last); + while (cache) { + if (cache->dirty) + break; + cache = next_block_group(root, cache); + } + if (!cache) { + if (last == 0) + break; + last = 0; + continue; + } cache->dirty = 0; - last += cache->key.offset; + last = cache->key.objectid + cache->key.offset; - err = write_one_cache_group(trans, root, - path, cache); - /* - * if we fail to write the cache group, we want - * to keep it marked dirty in hopes that a later - * write will work - */ - if (err) { - werr = err; - continue; - } + err = write_one_cache_group(trans, root, path, cache); + BUG_ON(err); + btrfs_put_block_group(cache); } + btrfs_free_path(path); - return werr; + return 0; } int btrfs_extent_readonly(struct btrfs_root *root, u64 bytenr) diff --git a/fs/btrfs/transaction.c b/fs/btrfs/transaction.c index 2dbf1c1f56e..81f7124c305 100644 --- a/fs/btrfs/transaction.c +++ b/fs/btrfs/transaction.c @@ -444,9 +444,6 @@ static int update_cowonly_root(struct btrfs_trans_handle *trans, btrfs_write_dirty_block_groups(trans, root); - ret = btrfs_run_delayed_refs(trans, root, (unsigned long)-1); - BUG_ON(ret); - while (1) { old_root_bytenr = btrfs_root_bytenr(&root->root_item); if (old_root_bytenr == root->node->start) @@ -457,9 +454,8 @@ static int update_cowonly_root(struct btrfs_trans_handle *trans, &root->root_key, &root->root_item); BUG_ON(ret); - btrfs_write_dirty_block_groups(trans, root); - ret = btrfs_run_delayed_refs(trans, root, (unsigned long)-1); + ret = btrfs_write_dirty_block_groups(trans, root); BUG_ON(ret); } free_extent_buffer(root->commit_root); @@ -495,9 +491,6 @@ static noinline int commit_cowonly_roots(struct btrfs_trans_handle *trans, root = list_entry(next, struct btrfs_root, dirty_list); update_cowonly_root(trans, root); - - ret = btrfs_run_delayed_refs(trans, root, (unsigned long)-1); - BUG_ON(ret); } return 0; } -- cgit v1.2.3 From 9ba5f005c994ad28e266a0cd14ef29354be382c9 Mon Sep 17 00:00:00 2001 From: Peter Zijlstra Date: Wed, 22 Jul 2009 14:18:35 +0200 Subject: softirq: introduce tasklet_hrtimer infrastructure commit ca109491f (hrtimer: removing all ur callback modes) moved all hrtimer callbacks into hard interrupt context when high resolution timers are active. That breaks code which relied on the assumption that the callback happens in softirq context. Provide a generic infrastructure which combines tasklets and hrtimers together to provide an in-softirq hrtimer experience. Signed-off-by: Peter Zijlstra Cc: torvalds@linux-foundation.org Cc: kaber@trash.net Cc: David Miller LKML-Reference: <1248265724.27058.1366.camel@twins> Signed-off-by: Thomas Gleixner --- include/linux/interrupt.h | 26 +++++++++++++++++++ kernel/softirq.c | 64 ++++++++++++++++++++++++++++++++++++++++++++++- 2 files changed, 89 insertions(+), 1 deletion(-) diff --git a/include/linux/interrupt.h b/include/linux/interrupt.h index 2721f07e935..fd4c9c63c75 100644 --- a/include/linux/interrupt.h +++ b/include/linux/interrupt.h @@ -14,6 +14,7 @@ #include #include #include +#include #include #include @@ -517,6 +518,31 @@ extern void tasklet_kill_immediate(struct tasklet_struct *t, unsigned int cpu); extern void tasklet_init(struct tasklet_struct *t, void (*func)(unsigned long), unsigned long data); +struct tasklet_hrtimer { + struct hrtimer timer; + struct tasklet_struct tasklet; + enum hrtimer_restart (*function)(struct hrtimer *); +}; + +extern void +tasklet_hrtimer_init(struct tasklet_hrtimer *ttimer, + enum hrtimer_restart (*function)(struct hrtimer *), + clockid_t which_clock, enum hrtimer_mode mode); + +static inline +int tasklet_hrtimer_start(struct tasklet_hrtimer *ttimer, ktime_t time, + const enum hrtimer_mode mode) +{ + return hrtimer_start(&ttimer->timer, time, mode); +} + +static inline +void tasklet_hrtimer_cancel(struct tasklet_hrtimer *ttimer) +{ + hrtimer_cancel(&ttimer->timer); + tasklet_kill(&ttimer->tasklet); +} + /* * Autoprobing for irqs: * diff --git a/kernel/softirq.c b/kernel/softirq.c index 3a94905fa5d..eb5e131a048 100644 --- a/kernel/softirq.c +++ b/kernel/softirq.c @@ -345,7 +345,9 @@ void open_softirq(int nr, void (*action)(struct softirq_action *)) softirq_vec[nr].action = action; } -/* Tasklets */ +/* + * Tasklets + */ struct tasklet_head { struct tasklet_struct *head; @@ -493,6 +495,66 @@ void tasklet_kill(struct tasklet_struct *t) EXPORT_SYMBOL(tasklet_kill); +/* + * tasklet_hrtimer + */ + +/* + * The trampoline is called when the hrtimer expires. If this is + * called from the hrtimer interrupt then we schedule the tasklet as + * the timer callback function expects to run in softirq context. If + * it's called in softirq context anyway (i.e. high resolution timers + * disabled) then the hrtimer callback is called right away. + */ +static enum hrtimer_restart __hrtimer_tasklet_trampoline(struct hrtimer *timer) +{ + struct tasklet_hrtimer *ttimer = + container_of(timer, struct tasklet_hrtimer, timer); + + if (hrtimer_is_hres_active(timer)) { + tasklet_hi_schedule(&ttimer->tasklet); + return HRTIMER_NORESTART; + } + return ttimer->function(timer); +} + +/* + * Helper function which calls the hrtimer callback from + * tasklet/softirq context + */ +static void __tasklet_hrtimer_trampoline(unsigned long data) +{ + struct tasklet_hrtimer *ttimer = (void *)data; + enum hrtimer_restart restart; + + restart = ttimer->function(&ttimer->timer); + if (restart != HRTIMER_NORESTART) + hrtimer_restart(&ttimer->timer); +} + +/** + * tasklet_hrtimer_init - Init a tasklet/hrtimer combo for softirq callbacks + * @ttimer: tasklet_hrtimer which is initialized + * @function: hrtimer callback funtion which gets called from softirq context + * @which_clock: clock id (CLOCK_MONOTONIC/CLOCK_REALTIME) + * @mode: hrtimer mode (HRTIMER_MODE_ABS/HRTIMER_MODE_REL) + */ +void tasklet_hrtimer_init(struct tasklet_hrtimer *ttimer, + enum hrtimer_restart (*function)(struct hrtimer *), + clockid_t which_clock, enum hrtimer_mode mode) +{ + hrtimer_init(&ttimer->timer, which_clock, mode); + ttimer->timer.function = __hrtimer_tasklet_trampoline; + tasklet_init(&ttimer->tasklet, __tasklet_hrtimer_trampoline, + (unsigned long)ttimer); + ttimer->function = function; +} +EXPORT_SYMBOL_GPL(tasklet_hrtimer_init); + +/* + * Remote softirq bits + */ + DEFINE_PER_CPU(struct list_head [NR_SOFTIRQS], softirq_work_list); EXPORT_PER_CPU_SYMBOL(softirq_work_list); -- cgit v1.2.3 From 68110661e86868cd107955ec7c077e1f34519f78 Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Wed, 22 Jul 2009 17:05:15 +0200 Subject: ALSA: ctxfi - Fix uninitialized error checks MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Fix a few uninitialized error checks that were introduced recently mistakenlly during the clean-up: sound/pci/ctxfi/ctamixer.c: In function ‘get_amixer_rsc’: sound/pci/ctxfi/ctamixer.c:261: warning: ‘err’ may be used uninitialized in this function sound/pci/ctxfi/ctamixer.c: In function ‘get_sum_rsc’: sound/pci/ctxfi/ctamixer.c:415: warning: ‘err’ may be used uninitialized in this function sound/pci/ctxfi/ctsrc.c: In function ‘get_srcimp_rsc’: sound/pci/ctxfi/ctsrc.c:742: warning: ‘err’ may be used uninitialized in this function Signed-off-by: Takashi Iwai --- sound/pci/ctxfi/ctamixer.c | 14 ++++++-------- sound/pci/ctxfi/ctsrc.c | 7 +++---- 2 files changed, 9 insertions(+), 12 deletions(-) diff --git a/sound/pci/ctxfi/ctamixer.c b/sound/pci/ctxfi/ctamixer.c index a1db51b3ead..a7f4a671f7b 100644 --- a/sound/pci/ctxfi/ctamixer.c +++ b/sound/pci/ctxfi/ctamixer.c @@ -242,13 +242,12 @@ static int get_amixer_rsc(struct amixer_mgr *mgr, /* Allocate mem for amixer resource */ amixer = kzalloc(sizeof(*amixer), GFP_KERNEL); - if (NULL == amixer) { - err = -ENOMEM; - return err; - } + if (!amixer) + return -ENOMEM; /* Check whether there are sufficient * amixer resources to meet request. */ + err = 0; spin_lock_irqsave(&mgr->mgr_lock, flags); for (i = 0; i < desc->msr; i++) { err = mgr_get_resource(&mgr->mgr, 1, &idx); @@ -397,12 +396,11 @@ static int get_sum_rsc(struct sum_mgr *mgr, /* Allocate mem for sum resource */ sum = kzalloc(sizeof(*sum), GFP_KERNEL); - if (NULL == sum) { - err = -ENOMEM; - return err; - } + if (!sum) + return -ENOMEM; /* Check whether there are sufficient sum resources to meet request. */ + err = 0; spin_lock_irqsave(&mgr->mgr_lock, flags); for (i = 0; i < desc->msr; i++) { err = mgr_get_resource(&mgr->mgr, 1, &idx); diff --git a/sound/pci/ctxfi/ctsrc.c b/sound/pci/ctxfi/ctsrc.c index e1c145d8b70..df43a5cd393 100644 --- a/sound/pci/ctxfi/ctsrc.c +++ b/sound/pci/ctxfi/ctsrc.c @@ -724,12 +724,11 @@ static int get_srcimp_rsc(struct srcimp_mgr *mgr, /* Allocate mem for SRCIMP resource */ srcimp = kzalloc(sizeof(*srcimp), GFP_KERNEL); - if (NULL == srcimp) { - err = -ENOMEM; - return err; - } + if (!srcimp) + return -ENOMEM; /* Check whether there are sufficient SRCIMP resources. */ + err = 0; spin_lock_irqsave(&mgr->mgr_lock, flags); for (i = 0; i < desc->msr; i++) { err = mgr_get_resource(&mgr->mgr, 1, &idx); -- cgit v1.2.3 From 3730793d457fed79a6d49bae72996d458c8e4f2d Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Wed, 22 Jul 2009 08:49:22 -0700 Subject: fbmon: work around compiler bug in gcc-2.4.2 There's some odd bug in gcc-4.2 where it miscompiles a simple loop whent he loop counter is of type 'unsigned char' and it should count to 128. The compiler will incorrectly decide that a trivial loop like this: unsigned char i, ... for (i = 0; i < 128; i++) { .. is endless, and will compile it to a single instruction that just branches to itself. This was triggered by the addition of '-fno-strict-overflow', and we could play games with compiler versions and go back to '-fwrapv' instead, but the trivial way to avoid it is to just make the loop induction variable be an 'int' instead. Thanks to Krzysztof Oledzki for reporting and testing and to Troy Moure for digging through assembler differences and finding it. Reported-and-tested-by: Krzysztof Oledzki Found-by: Troy Moure Gcc-bug-acked-by: Ian Lance Taylor Cc: stable@kernel.org Signed-off-by: Linus Torvalds --- drivers/video/fbmon.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/video/fbmon.c b/drivers/video/fbmon.c index 5c1a2c01778..9ae9cd32bd0 100644 --- a/drivers/video/fbmon.c +++ b/drivers/video/fbmon.c @@ -256,8 +256,8 @@ static void fix_edid(unsigned char *edid, int fix) static int edid_checksum(unsigned char *edid) { - unsigned char i, csum = 0, all_null = 0; - int err = 0, fix = check_edid(edid); + unsigned char csum = 0, all_null = 0; + int i, err = 0, fix = check_edid(edid); if (fix) fix_edid(edid, fix); -- cgit v1.2.3 From 9b7019ae6a542a801a80df6694c66e240e2c3e39 Mon Sep 17 00:00:00 2001 From: Peter Zijlstra Date: Wed, 22 Jul 2009 16:31:36 +0200 Subject: perf_counter: Remove unused variables Fix a gcc unused variables warning. Signed-off-by: Peter Zijlstra --- arch/x86/kernel/cpu/perf_counter.c | 2 -- 1 file changed, 2 deletions(-) diff --git a/arch/x86/kernel/cpu/perf_counter.c b/arch/x86/kernel/cpu/perf_counter.c index 7e346d4bc0f..a7aa8f90095 100644 --- a/arch/x86/kernel/cpu/perf_counter.c +++ b/arch/x86/kernel/cpu/perf_counter.c @@ -1570,8 +1570,6 @@ static struct x86_pmu amd_pmu = { static int p6_pmu_init(void) { - int high, low; - switch (boot_cpu_data.x86_model) { case 1: case 3: /* Pentium Pro */ -- cgit v1.2.3 From c9f73a3dd27e03411f18a58c0814d51392d2b17a Mon Sep 17 00:00:00 2001 From: Arjan van de Ven Date: Tue, 21 Jul 2009 00:55:05 -0700 Subject: perf: Fix stack data leak the "reserved" field was not initialized to zero, resulting in 4 bytes of stack data leaking to userspace.... Signed-off-by: Arjan van de Ven Signed-off-by: Peter Zijlstra --- kernel/perf_counter.c | 1 + 1 file changed, 1 insertion(+) diff --git a/kernel/perf_counter.c b/kernel/perf_counter.c index 5c6fae4f43d..ff854fd89a8 100644 --- a/kernel/perf_counter.c +++ b/kernel/perf_counter.c @@ -2666,6 +2666,7 @@ static void perf_counter_output(struct perf_counter *counter, int nmi, header.size += sizeof(cpu_entry); cpu_entry.cpu = raw_smp_processor_id(); + cpu_entry.reserved = 0; } if (sample_type & PERF_SAMPLE_PERIOD) -- cgit v1.2.3 From 573402db02746179b3f95f83a11a787501f52d0a Mon Sep 17 00:00:00 2001 From: Peter Zijlstra Date: Wed, 22 Jul 2009 11:13:50 +0200 Subject: perf_counter: Plug more stack leaks Per example of Arjan's patch, I went through and found a few more. Signed-off-by: Peter Zijlstra --- kernel/perf_counter.c | 23 +++++++++++++++++++++-- 1 file changed, 21 insertions(+), 2 deletions(-) diff --git a/kernel/perf_counter.c b/kernel/perf_counter.c index ff854fd89a8..e1d6a3aa133 100644 --- a/kernel/perf_counter.c +++ b/kernel/perf_counter.c @@ -2897,8 +2897,11 @@ void perf_counter_fork(struct task_struct *task) .event = { .header = { .type = PERF_EVENT_FORK, + .misc = 0, .size = sizeof(fork_event.event), }, + /* .pid */ + /* .ppid */ }, }; @@ -3008,8 +3011,16 @@ void perf_counter_comm(struct task_struct *task) comm_event = (struct perf_comm_event){ .task = task, + /* .comm */ + /* .comm_size */ .event = { - .header = { .type = PERF_EVENT_COMM, }, + .header = { + .type = PERF_EVENT_COMM, + .misc = 0, + /* .size */ + }, + /* .pid */ + /* .tid */ }, }; @@ -3160,8 +3171,16 @@ void __perf_counter_mmap(struct vm_area_struct *vma) mmap_event = (struct perf_mmap_event){ .vma = vma, + /* .file_name */ + /* .file_size */ .event = { - .header = { .type = PERF_EVENT_MMAP, }, + .header = { + .type = PERF_EVENT_MMAP, + .misc = 0, + /* .size */ + }, + /* .pid */ + /* .tid */ .start = vma->vm_start, .len = vma->vm_end - vma->vm_start, .pgoff = vma->vm_pgoff, -- cgit v1.2.3 From 7f453c24b95a085fc7bd35d53b33abc4dc5a048b Mon Sep 17 00:00:00 2001 From: Peter Zijlstra Date: Tue, 21 Jul 2009 13:19:40 +0200 Subject: perf_counter: PERF_SAMPLE_ID and inherited counters Anton noted that for inherited counters the counter-id as provided by PERF_SAMPLE_ID isn't mappable to the id found through PERF_RECORD_ID because each inherited counter gets its own id. His suggestion was to always return the parent counter id, since that is the primary counter id as exposed. However, these inherited counters have a unique identifier so that events like PERF_EVENT_PERIOD and PERF_EVENT_THROTTLE can be specific about which counter gets modified, which is important when trying to normalize the sample streams. This patch removes PERF_EVENT_PERIOD in favour of PERF_SAMPLE_PERIOD, which is more useful anyway, since changing periods became a lot more common than initially thought -- rendering PERF_EVENT_PERIOD the less useful solution (also, PERF_SAMPLE_PERIOD reports the more accurate value, since it reports the value used to trigger the overflow, whereas PERF_EVENT_PERIOD simply reports the requested period changed, which might only take effect on the next cycle). This still leaves us PERF_EVENT_THROTTLE to consider, but since that _should_ be a rare occurrence, and linking it to a primary id is the most useful bit to diagnose the problem, we introduce a PERF_SAMPLE_STREAM_ID, for those few cases where the full reconstruction is important. [Does change the ABI a little, but I see no other way out] Suggested-by: Anton Blanchard Signed-off-by: Peter Zijlstra LKML-Reference: <1248095846.15751.8781.camel@twins> --- include/linux/perf_counter.h | 15 ++----- kernel/perf_counter.c | 92 +++++++++++++++---------------------------- tools/perf/builtin-annotate.c | 24 ----------- tools/perf/builtin-report.c | 24 ----------- 4 files changed, 35 insertions(+), 120 deletions(-) diff --git a/include/linux/perf_counter.h b/include/linux/perf_counter.h index 5e970c7d3fd..bd15d7a5f5c 100644 --- a/include/linux/perf_counter.h +++ b/include/linux/perf_counter.h @@ -120,8 +120,9 @@ enum perf_counter_sample_format { PERF_SAMPLE_ID = 1U << 6, PERF_SAMPLE_CPU = 1U << 7, PERF_SAMPLE_PERIOD = 1U << 8, + PERF_SAMPLE_STREAM_ID = 1U << 9, - PERF_SAMPLE_MAX = 1U << 9, /* non-ABI */ + PERF_SAMPLE_MAX = 1U << 10, /* non-ABI */ }; /* @@ -312,16 +313,7 @@ enum perf_event_type { * struct perf_event_header header; * u64 time; * u64 id; - * u64 sample_period; - * }; - */ - PERF_EVENT_PERIOD = 4, - - /* - * struct { - * struct perf_event_header header; - * u64 time; - * u64 id; + * u64 stream_id; * }; */ PERF_EVENT_THROTTLE = 5, @@ -356,6 +348,7 @@ enum perf_event_type { * { u64 time; } && PERF_SAMPLE_TIME * { u64 addr; } && PERF_SAMPLE_ADDR * { u64 id; } && PERF_SAMPLE_ID + * { u64 stream_id;} && PERF_SAMPLE_STREAM_ID * { u32 cpu, res; } && PERF_SAMPLE_CPU * { u64 period; } && PERF_SAMPLE_PERIOD * diff --git a/kernel/perf_counter.c b/kernel/perf_counter.c index e1d6a3aa133..7530588fa5c 100644 --- a/kernel/perf_counter.c +++ b/kernel/perf_counter.c @@ -154,6 +154,20 @@ static void unclone_ctx(struct perf_counter_context *ctx) } } +/* + * If we inherit counters we want to return the parent counter id + * to userspace. + */ +static u64 primary_counter_id(struct perf_counter *counter) +{ + u64 id = counter->id; + + if (counter->parent) + id = counter->parent->id; + + return id; +} + /* * Get the perf_counter_context for a task and lock it. * This has to cope with with the fact that until it is locked, @@ -1296,7 +1310,6 @@ static void perf_counter_cpu_sched_in(struct perf_cpu_context *cpuctx, int cpu) #define MAX_INTERRUPTS (~0ULL) static void perf_log_throttle(struct perf_counter *counter, int enable); -static void perf_log_period(struct perf_counter *counter, u64 period); static void perf_adjust_period(struct perf_counter *counter, u64 events) { @@ -1315,8 +1328,6 @@ static void perf_adjust_period(struct perf_counter *counter, u64 events) if (!sample_period) sample_period = 1; - perf_log_period(counter, sample_period); - hwc->sample_period = sample_period; } @@ -1705,7 +1716,7 @@ perf_read_hw(struct perf_counter *counter, char __user *buf, size_t count) values[n++] = counter->total_time_running + atomic64_read(&counter->child_total_time_running); if (counter->attr.read_format & PERF_FORMAT_ID) - values[n++] = counter->id; + values[n++] = primary_counter_id(counter); mutex_unlock(&counter->child_mutex); if (count < n * sizeof(u64)) @@ -1812,8 +1823,6 @@ static int perf_counter_period(struct perf_counter *counter, u64 __user *arg) counter->attr.sample_freq = value; } else { - perf_log_period(counter, value); - counter->attr.sample_period = value; counter->hw.sample_period = value; } @@ -2662,6 +2671,9 @@ static void perf_counter_output(struct perf_counter *counter, int nmi, if (sample_type & PERF_SAMPLE_ID) header.size += sizeof(u64); + if (sample_type & PERF_SAMPLE_STREAM_ID) + header.size += sizeof(u64); + if (sample_type & PERF_SAMPLE_CPU) { header.size += sizeof(cpu_entry); @@ -2705,7 +2717,13 @@ static void perf_counter_output(struct perf_counter *counter, int nmi, if (sample_type & PERF_SAMPLE_ADDR) perf_output_put(&handle, data->addr); - if (sample_type & PERF_SAMPLE_ID) + if (sample_type & PERF_SAMPLE_ID) { + u64 id = primary_counter_id(counter); + + perf_output_put(&handle, id); + } + + if (sample_type & PERF_SAMPLE_STREAM_ID) perf_output_put(&handle, counter->id); if (sample_type & PERF_SAMPLE_CPU) @@ -2728,7 +2746,7 @@ static void perf_counter_output(struct perf_counter *counter, int nmi, if (sub != counter) sub->pmu->read(sub); - group_entry.id = sub->id; + group_entry.id = primary_counter_id(sub); group_entry.counter = atomic64_read(&sub->count); perf_output_put(&handle, group_entry); @@ -2788,15 +2806,8 @@ perf_counter_read_event(struct perf_counter *counter, } if (counter->attr.read_format & PERF_FORMAT_ID) { - u64 id; - event.header.size += sizeof(u64); - if (counter->parent) - id = counter->parent->id; - else - id = counter->id; - - event.format[i++] = id; + event.format[i++] = primary_counter_id(counter); } ret = perf_output_begin(&handle, counter, event.header.size, 0, 0); @@ -3190,49 +3201,6 @@ void __perf_counter_mmap(struct vm_area_struct *vma) perf_counter_mmap_event(&mmap_event); } -/* - * Log sample_period changes so that analyzing tools can re-normalize the - * event flow. - */ - -struct freq_event { - struct perf_event_header header; - u64 time; - u64 id; - u64 period; -}; - -static void perf_log_period(struct perf_counter *counter, u64 period) -{ - struct perf_output_handle handle; - struct freq_event event; - int ret; - - if (counter->hw.sample_period == period) - return; - - if (counter->attr.sample_type & PERF_SAMPLE_PERIOD) - return; - - event = (struct freq_event) { - .header = { - .type = PERF_EVENT_PERIOD, - .misc = 0, - .size = sizeof(event), - }, - .time = sched_clock(), - .id = counter->id, - .period = period, - }; - - ret = perf_output_begin(&handle, counter, sizeof(event), 1, 0); - if (ret) - return; - - perf_output_put(&handle, event); - perf_output_end(&handle); -} - /* * IRQ throttle logging */ @@ -3246,14 +3214,16 @@ static void perf_log_throttle(struct perf_counter *counter, int enable) struct perf_event_header header; u64 time; u64 id; + u64 stream_id; } throttle_event = { .header = { .type = PERF_EVENT_THROTTLE + 1, .misc = 0, .size = sizeof(throttle_event), }, - .time = sched_clock(), - .id = counter->id, + .time = sched_clock(), + .id = primary_counter_id(counter), + .stream_id = counter->id, }; ret = perf_output_begin(&handle, counter, sizeof(throttle_event), 1, 0); diff --git a/tools/perf/builtin-annotate.c b/tools/perf/builtin-annotate.c index 5f9eefecc57..1dba568e194 100644 --- a/tools/perf/builtin-annotate.c +++ b/tools/perf/builtin-annotate.c @@ -74,20 +74,12 @@ struct fork_event { u32 pid, ppid; }; -struct period_event { - struct perf_event_header header; - u64 time; - u64 id; - u64 sample_period; -}; - typedef union event_union { struct perf_event_header header; struct ip_event ip; struct mmap_event mmap; struct comm_event comm; struct fork_event fork; - struct period_event period; } event_t; @@ -997,19 +989,6 @@ process_fork_event(event_t *event, unsigned long offset, unsigned long head) return 0; } -static int -process_period_event(event_t *event, unsigned long offset, unsigned long head) -{ - dprintf("%p [%p]: PERF_EVENT_PERIOD: time:%Ld, id:%Ld: period:%Ld\n", - (void *)(offset + head), - (void *)(long)(event->header.size), - event->period.time, - event->period.id, - event->period.sample_period); - - return 0; -} - static int process_event(event_t *event, unsigned long offset, unsigned long head) { @@ -1025,9 +1004,6 @@ process_event(event_t *event, unsigned long offset, unsigned long head) case PERF_EVENT_FORK: return process_fork_event(event, offset, head); - - case PERF_EVENT_PERIOD: - return process_period_event(event, offset, head); /* * We dont process them right now but they are fine: */ diff --git a/tools/perf/builtin-report.c b/tools/perf/builtin-report.c index a118bc77286..b20a4b6e31b 100644 --- a/tools/perf/builtin-report.c +++ b/tools/perf/builtin-report.c @@ -101,13 +101,6 @@ struct fork_event { u32 pid, ppid; }; -struct period_event { - struct perf_event_header header; - u64 time; - u64 id; - u64 sample_period; -}; - struct lost_event { struct perf_event_header header; u64 id; @@ -127,7 +120,6 @@ typedef union event_union { struct mmap_event mmap; struct comm_event comm; struct fork_event fork; - struct period_event period; struct lost_event lost; struct read_event read; } event_t; @@ -1635,19 +1627,6 @@ process_fork_event(event_t *event, unsigned long offset, unsigned long head) return 0; } -static int -process_period_event(event_t *event, unsigned long offset, unsigned long head) -{ - dprintf("%p [%p]: PERF_EVENT_PERIOD: time:%Ld, id:%Ld: period:%Ld\n", - (void *)(offset + head), - (void *)(long)(event->header.size), - event->period.time, - event->period.id, - event->period.sample_period); - - return 0; -} - static int process_lost_event(event_t *event, unsigned long offset, unsigned long head) { @@ -1729,9 +1708,6 @@ process_event(event_t *event, unsigned long offset, unsigned long head) case PERF_EVENT_FORK: return process_fork_event(event, offset, head); - case PERF_EVENT_PERIOD: - return process_period_event(event, offset, head); - case PERF_EVENT_LOST: return process_lost_event(event, offset, head); -- cgit v1.2.3 From a0541234f89c93f313961ce7b28676e11488a5f0 Mon Sep 17 00:00:00 2001 From: Anton Blanchard Date: Wed, 22 Jul 2009 23:04:12 +1000 Subject: perf_counter: Improve perf stat and perf record option parsing perf stat and perf record currently look for all options on the command line. This can lead to some confusion: # perf stat ls -l Error: unknown switch `l' While we can work around this by adding '--' before the command, the git option parsing code can stop at the first non option: # perf stat ls -l Performance counter stats for 'ls -l': .... Signed-off-by: Anton Blanchard Signed-off-by: Peter Zijlstra LKML-Reference: <20090722130412.GD9029@kryten> --- tools/perf/builtin-record.c | 3 ++- tools/perf/builtin-stat.c | 3 ++- 2 files changed, 4 insertions(+), 2 deletions(-) diff --git a/tools/perf/builtin-record.c b/tools/perf/builtin-record.c index 68a9be0d151..6da09928130 100644 --- a/tools/perf/builtin-record.c +++ b/tools/perf/builtin-record.c @@ -664,7 +664,8 @@ int cmd_record(int argc, const char **argv, const char *prefix __used) { int counter; - argc = parse_options(argc, argv, options, record_usage, 0); + argc = parse_options(argc, argv, options, record_usage, + PARSE_OPT_STOP_AT_NON_OPTION); if (!argc && target_pid == -1 && !system_wide) usage_with_options(record_usage, options); diff --git a/tools/perf/builtin-stat.c b/tools/perf/builtin-stat.c index 27921a8ce1a..f9510eeeb6c 100644 --- a/tools/perf/builtin-stat.c +++ b/tools/perf/builtin-stat.c @@ -511,7 +511,8 @@ int cmd_stat(int argc, const char **argv, const char *prefix __used) { int status; - argc = parse_options(argc, argv, options, stat_usage, 0); + argc = parse_options(argc, argv, options, stat_usage, + PARSE_OPT_STOP_AT_NON_OPTION); if (!argc) usage_with_options(stat_usage, options); if (run_count <= 0 || run_count > MAX_RUN) -- cgit v1.2.3 From 966ee4d6b887c14159043ac80b8c3661d2bbe5e2 Mon Sep 17 00:00:00 2001 From: Anton Blanchard Date: Wed, 22 Jul 2009 23:05:46 +1000 Subject: perf_counter: Fix throttle/unthrottle event logging Right now we only print PERF_EVENT_THROTTLE + 1 (ie PERF_EVENT_UNTHROTTLE). Fix this to print both a throttle and unthrottle event. Signed-off-by: Anton Blanchard Signed-off-by: Peter Zijlstra LKML-Reference: <20090722130546.GE9029@kryten> --- kernel/perf_counter.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) diff --git a/kernel/perf_counter.c b/kernel/perf_counter.c index 7530588fa5c..787d4daef18 100644 --- a/kernel/perf_counter.c +++ b/kernel/perf_counter.c @@ -3217,7 +3217,7 @@ static void perf_log_throttle(struct perf_counter *counter, int enable) u64 stream_id; } throttle_event = { .header = { - .type = PERF_EVENT_THROTTLE + 1, + .type = PERF_EVENT_THROTTLE, .misc = 0, .size = sizeof(throttle_event), }, @@ -3226,6 +3226,9 @@ static void perf_log_throttle(struct perf_counter *counter, int enable) .stream_id = counter->id, }; + if (enable) + throttle_event.header.type = PERF_EVENT_UNTHROTTLE; + ret = perf_output_begin(&handle, counter, sizeof(throttle_event), 1, 0); if (ret) return; -- cgit v1.2.3 From dfe5a50461db90fab901cb697eff0d3d2e9fd229 Mon Sep 17 00:00:00 2001 From: Arjan van de Ven Date: Mon, 20 Jul 2009 22:54:26 -0700 Subject: perf: avoid structure size confusion by using a fixed size for some reason, this structure gets compiled as 36 bytes in some files (the ones that alloacte it) but 40 bytes in others (the ones that use it). The cause is an off_t type that gets a different size in different compilation units for some yet-to-be-explained reason. But the effect is disasterous; the size/offset members of the struct are at different offsets, and result in mostly complete garbage. The parser in perf is so robust that this all gets hidden, and after skipping an certain amount of samples, it recovers.... so this bug is not normally noticed. .... except when you want every sample to be exact. Fix this by just using an explicitly sized type. Signed-off-by: Arjan van de Ven Signed-off-by: Peter Zijlstra LKML-Reference: <4A655917.9080504@linux.intel.com> --- tools/perf/util/header.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/tools/perf/util/header.h b/tools/perf/util/header.h index b5ef53ad4c7..bf280449fcf 100644 --- a/tools/perf/util/header.h +++ b/tools/perf/util/header.h @@ -16,7 +16,7 @@ struct perf_header { int frozen; int attrs, size; struct perf_header_attr **attr; - off_t attr_offset; + s64 attr_offset; u64 data_offset; u64 data_size; }; -- cgit v1.2.3 From 28ac909b49a155856c957d080f8a796b3c1d1f3e Mon Sep 17 00:00:00 2001 From: Arnaldo Carvalho de Melo Date: Mon, 20 Jul 2009 14:14:12 -0300 Subject: perf symbol: C++ demangling MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit [acme@doppio ~]$ perf report -s comm,dso,symbol -C firefox -d /usr/lib64/xulrunner-1.9.1/libxul.so | grep :: | head 2.21% [.] nsDeque::Push(void*) 1.78% [.] GraphWalker::DoWalk(nsDeque&) 1.30% [.] GCGraphBuilder::AddNode(void*, nsCycleCollectionParticipant*) 1.27% [.] XPCWrappedNative::CallMethod(XPCCallContext&, XPCWrappedNative::CallMode) 1.18% [.] imgContainer::DrawFrameTo(gfxIImageFrame*, gfxIImageFrame*, nsRect&) 1.13% [.] nsDeque::PopFront() 1.11% [.] nsGlobalWindow::RunTimeout(nsTimeout*) 0.97% [.] nsXPConnect::Traverse(void*, nsCycleCollectionTraversalCallback&) 0.95% [.] nsJSEventListener::cycleCollection::Traverse(void*, nsCycleCollectionTraversalCallback&) 0.95% [.] nsCOMPtr_base::~nsCOMPtr_base() [acme@doppio ~]$ Cc: Pekka Enberg Cc: Vegard Nossum Cc: Paul Mackerras Cc: Frédéric Weisbecker Suggested-by: Clark Williams Signed-off-by: Arnaldo Carvalho de Melo Signed-off-by: Peter Zijlstra LKML-Reference: <20090720171412.GB10410@ghostprotocols.net> --- tools/perf/Makefile | 2 +- tools/perf/util/symbol.c | 21 +++++++++++++++++++-- 2 files changed, 20 insertions(+), 3 deletions(-) diff --git a/tools/perf/Makefile b/tools/perf/Makefile index 7822b3d6bac..a5e9b876ca0 100644 --- a/tools/perf/Makefile +++ b/tools/perf/Makefile @@ -345,7 +345,7 @@ BUILTIN_OBJS += builtin-stat.o BUILTIN_OBJS += builtin-top.o PERFLIBS = $(LIB_FILE) -EXTLIBS = +EXTLIBS = -lbfd # # Platform specific tweaks diff --git a/tools/perf/util/symbol.c b/tools/perf/util/symbol.c index f40266b4845..98aee922acc 100644 --- a/tools/perf/util/symbol.c +++ b/tools/perf/util/symbol.c @@ -6,9 +6,15 @@ #include #include #include +#include const char *sym_hist_filter; +#ifndef DMGL_PARAMS +#define DMGL_PARAMS (1 << 0) /* Include function args */ +#define DMGL_ANSI (1 << 1) /* Include const, volatile, etc */ +#endif + static struct symbol *symbol__new(u64 start, u64 len, const char *name, unsigned int priv_size, u64 obj_start, int verbose) @@ -571,6 +577,8 @@ static int dso__load_sym(struct dso *self, int fd, const char *name, NULL) != NULL); elf_symtab__for_each_symbol(syms, nr_syms, index, sym) { struct symbol *f; + const char *name; + char *demangled; u64 obj_start; struct section *section = NULL; int is_label = elf_sym__is_label(&sym); @@ -609,10 +617,19 @@ static int dso__load_sym(struct dso *self, int fd, const char *name, goto out_elf_end; } } + /* + * We need to figure out if the object was created from C++ sources + * DWARF DW_compile_unit has this, but we don't always have access + * to it... + */ + name = elf_sym__name(&sym, symstrs); + demangled = bfd_demangle(NULL, name, DMGL_PARAMS | DMGL_ANSI); + if (demangled != NULL) + name = demangled; - f = symbol__new(sym.st_value, sym.st_size, - elf_sym__name(&sym, symstrs), + f = symbol__new(sym.st_value, sym.st_size, name, self->sym_priv_size, obj_start, verbose); + free(demangled); if (!f) goto out_elf_end; -- cgit v1.2.3 From f6bdafef2ab911f03321fa83d8da1df99878009e Mon Sep 17 00:00:00 2001 From: Jason Baron Date: Tue, 21 Jul 2009 12:20:22 -0400 Subject: perf_counter: Add tracepoint support to perf list, perf stat Add support to 'perf list' and 'perf stat' for kernel tracepoints. The implementation creates a 'for_each_subsystem' and 'for_each_event' for easy iteration over the tracepoints. Signed-off-by: Jason Baron Signed-off-by: Peter Zijlstra LKML-Reference: <426129bf9fcc8ee63bb094cf736e7316a7dcd77a.1248190728.git.jbaron@redhat.com> --- tools/perf/util/parse-events.c | 175 ++++++++++++++++++++++++++++++++++++++++- tools/perf/util/util.h | 2 + 2 files changed, 176 insertions(+), 1 deletion(-) diff --git a/tools/perf/util/parse-events.c b/tools/perf/util/parse-events.c index d18c98edd00..5a3cd3a34af 100644 --- a/tools/perf/util/parse-events.c +++ b/tools/perf/util/parse-events.c @@ -12,6 +12,8 @@ int nr_counters; struct perf_counter_attr attrs[MAX_COUNTERS]; +static char default_debugfs_path[] = "/sys/kernel/debug/tracing/events"; + struct event_symbol { u8 type; u64 config; @@ -110,6 +112,88 @@ static unsigned long hw_cache_stat[C(MAX)] = { [C(BPU)] = (CACHE_READ), }; +#define for_each_subsystem(sys_dir, sys_dirent, sys_next, file, st) \ + while (!readdir_r(sys_dir, &sys_dirent, &sys_next) && sys_next) \ + if (snprintf(file, MAXPATHLEN, "%s/%s", default_debugfs_path, \ + sys_dirent.d_name) && \ + (!stat(file, &st)) && (S_ISDIR(st.st_mode)) && \ + (strcmp(sys_dirent.d_name, ".")) && \ + (strcmp(sys_dirent.d_name, ".."))) + +#define for_each_event(sys_dirent, evt_dir, evt_dirent, evt_next, file, st) \ + while (!readdir_r(evt_dir, &evt_dirent, &evt_next) && evt_next) \ + if (snprintf(file, MAXPATHLEN, "%s/%s/%s", default_debugfs_path, \ + sys_dirent.d_name, evt_dirent.d_name) && \ + (!stat(file, &st)) && (S_ISDIR(st.st_mode)) && \ + (strcmp(evt_dirent.d_name, ".")) && \ + (strcmp(evt_dirent.d_name, ".."))) + +#define MAX_EVENT_LENGTH 30 + +static int valid_debugfs_mount(void) +{ + struct statfs st_fs; + + if (statfs(default_debugfs_path, &st_fs) < 0) + return -ENOENT; + else if (st_fs.f_type != (long) DEBUGFS_MAGIC) + return -ENOENT; + return 0; +} + +static char *tracepoint_id_to_name(u64 config) +{ + static char tracepoint_name[2 * MAX_EVENT_LENGTH]; + DIR *sys_dir, *evt_dir; + struct dirent *sys_next, *evt_next, sys_dirent, evt_dirent; + struct stat st; + char id_buf[4]; + int fd; + u64 id; + char evt_path[MAXPATHLEN]; + + if (valid_debugfs_mount()) + return "unkown"; + + sys_dir = opendir(default_debugfs_path); + if (!sys_dir) + goto cleanup; + + for_each_subsystem(sys_dir, sys_dirent, sys_next, evt_path, st) { + evt_dir = opendir(evt_path); + if (!evt_dir) + goto cleanup; + for_each_event(sys_dirent, evt_dir, evt_dirent, evt_next, + evt_path, st) { + snprintf(evt_path, MAXPATHLEN, "%s/%s/%s/id", + default_debugfs_path, sys_dirent.d_name, + evt_dirent.d_name); + fd = open(evt_path, O_RDONLY); + if (fd < 0) + continue; + if (read(fd, id_buf, sizeof(id_buf)) < 0) { + close(fd); + continue; + } + close(fd); + id = atoll(id_buf); + if (id == config) { + closedir(evt_dir); + closedir(sys_dir); + snprintf(tracepoint_name, 2 * MAX_EVENT_LENGTH, + "%s:%s", sys_dirent.d_name, + evt_dirent.d_name); + return tracepoint_name; + } + } + closedir(evt_dir); + } + +cleanup: + closedir(sys_dir); + return "unkown"; +} + static int is_cache_op_valid(u8 cache_type, u8 cache_op) { if (hw_cache_stat[cache_type] & COP(cache_op)) @@ -177,6 +261,9 @@ char *event_name(int counter) return sw_event_names[config]; return "unknown-software"; + case PERF_TYPE_TRACEPOINT: + return tracepoint_id_to_name(config); + default: break; } @@ -265,6 +352,53 @@ parse_generic_hw_event(const char **str, struct perf_counter_attr *attr) return 1; } +static int parse_tracepoint_event(const char **strp, + struct perf_counter_attr *attr) +{ + const char *evt_name; + char sys_name[MAX_EVENT_LENGTH]; + char id_buf[4]; + int fd; + unsigned int sys_length, evt_length; + u64 id; + char evt_path[MAXPATHLEN]; + + if (valid_debugfs_mount()) + return 0; + + evt_name = strchr(*strp, ':'); + if (!evt_name) + return 0; + + sys_length = evt_name - *strp; + if (sys_length >= MAX_EVENT_LENGTH) + return 0; + + strncpy(sys_name, *strp, sys_length); + sys_name[sys_length] = '\0'; + evt_name = evt_name + 1; + evt_length = strlen(evt_name); + if (evt_length >= MAX_EVENT_LENGTH) + return 0; + + snprintf(evt_path, MAXPATHLEN, "%s/%s/%s/id", default_debugfs_path, + sys_name, evt_name); + fd = open(evt_path, O_RDONLY); + if (fd < 0) + return 0; + + if (read(fd, id_buf, sizeof(id_buf)) < 0) { + close(fd); + return 0; + } + close(fd); + id = atoll(id_buf); + attr->config = id; + attr->type = PERF_TYPE_TRACEPOINT; + *strp = evt_name + evt_length; + return 1; +} + static int check_events(const char *str, unsigned int i) { int n; @@ -374,7 +508,8 @@ parse_event_modifier(const char **strp, struct perf_counter_attr *attr) */ static int parse_event_symbols(const char **str, struct perf_counter_attr *attr) { - if (!(parse_raw_event(str, attr) || + if (!(parse_tracepoint_event(str, attr) || + parse_raw_event(str, attr) || parse_numeric_event(str, attr) || parse_symbolic_event(str, attr) || parse_generic_hw_event(str, attr))) @@ -422,6 +557,42 @@ static const char * const event_type_descriptors[] = { "Hardware cache event", }; +/* + * Print the events from /tracing/events + */ + +static void print_tracepoint_events(void) +{ + DIR *sys_dir, *evt_dir; + struct dirent *sys_next, *evt_next, sys_dirent, evt_dirent; + struct stat st; + char evt_path[MAXPATHLEN]; + + if (valid_debugfs_mount()) + return; + + sys_dir = opendir(default_debugfs_path); + if (!sys_dir) + goto cleanup; + + for_each_subsystem(sys_dir, sys_dirent, sys_next, evt_path, st) { + evt_dir = opendir(evt_path); + if (!evt_dir) + goto cleanup; + for_each_event(sys_dirent, evt_dir, evt_dirent, evt_next, + evt_path, st) { + snprintf(evt_path, MAXPATHLEN, "%s:%s", + sys_dirent.d_name, evt_dirent.d_name); + fprintf(stderr, " %-40s [%s]\n", evt_path, + event_type_descriptors[PERF_TYPE_TRACEPOINT+1]); + } + closedir(evt_dir); + } + +cleanup: + closedir(sys_dir); +} + /* * Print the help text for the event symbols: */ @@ -472,5 +643,7 @@ void print_events(void) "rNNN"); fprintf(stderr, "\n"); + print_tracepoint_events(); + exit(129); } diff --git a/tools/perf/util/util.h b/tools/perf/util/util.h index b4be6071c10..68fe157d72f 100644 --- a/tools/perf/util/util.h +++ b/tools/perf/util/util.h @@ -50,6 +50,7 @@ #include #include #include +#include #include #include #include @@ -80,6 +81,7 @@ #include #include #include +#include "../../../include/linux/magic.h" #ifndef NO_ICONV #include -- cgit v1.2.3 From 5beeded123c5befa21f1c6e16219f2a3eb7dd197 Mon Sep 17 00:00:00 2001 From: Jason Baron Date: Tue, 21 Jul 2009 14:16:29 -0400 Subject: perf_counter: Detect debugfs location If "/sys/kernel/debug" is not a debugfs mount point, search for the debugfs filesystem in /proc/mounts, but also allows the user to specify '--debugfs-dir=blah' or set the environment variable: 'PERF_DEBUGFS_DIR' Signed-off-by: Jason Baron [ also made it probe "/debug" by default ] Signed-off-by: Peter Zijlstra LKML-Reference: <20090721181629.GA3094@redhat.com> --- tools/perf/perf.c | 77 +++++++++++++++++++++++++++++++++++++++++- tools/perf/util/cache.h | 1 + tools/perf/util/parse-events.c | 33 +++++++++--------- tools/perf/util/parse-events.h | 5 +++ tools/perf/util/string.h | 3 ++ 5 files changed, 102 insertions(+), 17 deletions(-) diff --git a/tools/perf/perf.c b/tools/perf/perf.c index c5656784c61..31982ad064b 100644 --- a/tools/perf/perf.c +++ b/tools/perf/perf.c @@ -12,6 +12,8 @@ #include "util/cache.h" #include "util/quote.h" #include "util/run-command.h" +#include "util/parse-events.h" +#include "util/string.h" const char perf_usage_string[] = "perf [--version] [--help] COMMAND [ARGS]"; @@ -25,6 +27,8 @@ struct pager_config { int val; }; +static char debugfs_mntpt[MAXPATHLEN]; + static int pager_command_config(const char *var, const char *value, void *data) { struct pager_config *c = data; @@ -56,6 +60,15 @@ static void commit_pager_choice(void) { } } +static void set_debugfs_path(void) +{ + char *path; + + path = getenv(PERF_DEBUGFS_ENVIRONMENT); + snprintf(debugfs_path, MAXPATHLEN, "%s/%s", path ?: debugfs_mntpt, + "tracing/events"); +} + static int handle_options(const char*** argv, int* argc, int* envchanged) { int handled = 0; @@ -122,6 +135,22 @@ static int handle_options(const char*** argv, int* argc, int* envchanged) setenv(PERF_WORK_TREE_ENVIRONMENT, cmd + 12, 1); if (envchanged) *envchanged = 1; + } else if (!strcmp(cmd, "--debugfs-dir")) { + if (*argc < 2) { + fprintf(stderr, "No directory given for --debugfs-dir.\n"); + usage(perf_usage_string); + } + strncpy(debugfs_mntpt, (*argv)[1], MAXPATHLEN); + debugfs_mntpt[MAXPATHLEN - 1] = '\0'; + if (envchanged) + *envchanged = 1; + (*argv)++; + (*argc)--; + } else if (!prefixcmp(cmd, "--debugfs-dir=")) { + strncpy(debugfs_mntpt, cmd + 14, MAXPATHLEN); + debugfs_mntpt[MAXPATHLEN - 1] = '\0'; + if (envchanged) + *envchanged = 1; } else { fprintf(stderr, "Unknown option: %s\n", cmd); usage(perf_usage_string); @@ -228,6 +257,7 @@ static int run_builtin(struct cmd_struct *p, int argc, const char **argv) if (use_pager == -1 && p->option & USE_PAGER) use_pager = 1; commit_pager_choice(); + set_debugfs_path(); status = p->fn(argc, argv, prefix); if (status) @@ -346,6 +376,49 @@ static int run_argv(int *argcp, const char ***argv) return done_alias; } +/* mini /proc/mounts parser: searching for "^blah /mount/point debugfs" */ +static void get_debugfs_mntpt(void) +{ + FILE *file; + char fs_type[100]; + char debugfs[MAXPATHLEN]; + + /* + * try the standard location + */ + if (valid_debugfs_mount("/sys/kernel/debug/") == 0) { + strcpy(debugfs_mntpt, "/sys/kernel/debug/"); + return; + } + + /* + * try the sane location + */ + if (valid_debugfs_mount("/debug/") == 0) { + strcpy(debugfs_mntpt, "/debug/"); + return; + } + + /* + * give up and parse /proc/mounts + */ + file = fopen("/proc/mounts", "r"); + if (file == NULL) + return; + + while (fscanf(file, "%*s %" + STR(MAXPATHLEN) + "s %99s %*s %*d %*d\n", + debugfs, fs_type) == 2) { + if (strcmp(fs_type, "debugfs") == 0) + break; + } + fclose(file); + if (strcmp(fs_type, "debugfs") == 0) { + strncpy(debugfs_mntpt, debugfs, MAXPATHLEN); + debugfs_mntpt[MAXPATHLEN - 1] = '\0'; + } +} int main(int argc, const char **argv) { @@ -354,7 +427,8 @@ int main(int argc, const char **argv) cmd = perf_extract_argv0_path(argv[0]); if (!cmd) cmd = "perf-help"; - + /* get debugfs mount point from /proc/mounts */ + get_debugfs_mntpt(); /* * "perf-xxxx" is the same as "perf xxxx", but we obviously: * @@ -377,6 +451,7 @@ int main(int argc, const char **argv) argc--; handle_options(&argv, &argc, NULL); commit_pager_choice(); + set_debugfs_path(); if (argc > 0) { if (!prefixcmp(argv[0], "--")) argv[0] += 2; diff --git a/tools/perf/util/cache.h b/tools/perf/util/cache.h index 161d5f413e2..4b50c412b9c 100644 --- a/tools/perf/util/cache.h +++ b/tools/perf/util/cache.h @@ -18,6 +18,7 @@ #define PERFATTRIBUTES_FILE ".perfattributes" #define INFOATTRIBUTES_FILE "info/attributes" #define ATTRIBUTE_MACRO_PREFIX "[attr]" +#define PERF_DEBUGFS_ENVIRONMENT "PERF_DEBUGFS_DIR" typedef int (*config_fn_t)(const char *, const char *, void *); extern int perf_default_config(const char *, const char *, void *); diff --git a/tools/perf/util/parse-events.c b/tools/perf/util/parse-events.c index 5a3cd3a34af..7bdad8df22a 100644 --- a/tools/perf/util/parse-events.c +++ b/tools/perf/util/parse-events.c @@ -5,6 +5,7 @@ #include "parse-events.h" #include "exec_cmd.h" #include "string.h" +#include "cache.h" extern char *strcasestr(const char *haystack, const char *needle); @@ -12,8 +13,6 @@ int nr_counters; struct perf_counter_attr attrs[MAX_COUNTERS]; -static char default_debugfs_path[] = "/sys/kernel/debug/tracing/events"; - struct event_symbol { u8 type; u64 config; @@ -21,6 +20,8 @@ struct event_symbol { char *alias; }; +char debugfs_path[MAXPATHLEN]; + #define CHW(x) .type = PERF_TYPE_HARDWARE, .config = PERF_COUNT_HW_##x #define CSW(x) .type = PERF_TYPE_SOFTWARE, .config = PERF_COUNT_SW_##x @@ -114,27 +115,27 @@ static unsigned long hw_cache_stat[C(MAX)] = { #define for_each_subsystem(sys_dir, sys_dirent, sys_next, file, st) \ while (!readdir_r(sys_dir, &sys_dirent, &sys_next) && sys_next) \ - if (snprintf(file, MAXPATHLEN, "%s/%s", default_debugfs_path, \ - sys_dirent.d_name) && \ + if (snprintf(file, MAXPATHLEN, "%s/%s", debugfs_path, \ + sys_dirent.d_name) && \ (!stat(file, &st)) && (S_ISDIR(st.st_mode)) && \ (strcmp(sys_dirent.d_name, ".")) && \ (strcmp(sys_dirent.d_name, ".."))) #define for_each_event(sys_dirent, evt_dir, evt_dirent, evt_next, file, st) \ while (!readdir_r(evt_dir, &evt_dirent, &evt_next) && evt_next) \ - if (snprintf(file, MAXPATHLEN, "%s/%s/%s", default_debugfs_path, \ - sys_dirent.d_name, evt_dirent.d_name) && \ + if (snprintf(file, MAXPATHLEN, "%s/%s/%s", debugfs_path, \ + sys_dirent.d_name, evt_dirent.d_name) && \ (!stat(file, &st)) && (S_ISDIR(st.st_mode)) && \ (strcmp(evt_dirent.d_name, ".")) && \ (strcmp(evt_dirent.d_name, ".."))) #define MAX_EVENT_LENGTH 30 -static int valid_debugfs_mount(void) +int valid_debugfs_mount(const char *debugfs) { struct statfs st_fs; - if (statfs(default_debugfs_path, &st_fs) < 0) + if (statfs(debugfs, &st_fs) < 0) return -ENOENT; else if (st_fs.f_type != (long) DEBUGFS_MAGIC) return -ENOENT; @@ -152,10 +153,10 @@ static char *tracepoint_id_to_name(u64 config) u64 id; char evt_path[MAXPATHLEN]; - if (valid_debugfs_mount()) + if (valid_debugfs_mount(debugfs_path)) return "unkown"; - sys_dir = opendir(default_debugfs_path); + sys_dir = opendir(debugfs_path); if (!sys_dir) goto cleanup; @@ -166,7 +167,7 @@ static char *tracepoint_id_to_name(u64 config) for_each_event(sys_dirent, evt_dir, evt_dirent, evt_next, evt_path, st) { snprintf(evt_path, MAXPATHLEN, "%s/%s/%s/id", - default_debugfs_path, sys_dirent.d_name, + debugfs_path, sys_dirent.d_name, evt_dirent.d_name); fd = open(evt_path, O_RDONLY); if (fd < 0) @@ -363,7 +364,7 @@ static int parse_tracepoint_event(const char **strp, u64 id; char evt_path[MAXPATHLEN]; - if (valid_debugfs_mount()) + if (valid_debugfs_mount(debugfs_path)) return 0; evt_name = strchr(*strp, ':'); @@ -381,8 +382,8 @@ static int parse_tracepoint_event(const char **strp, if (evt_length >= MAX_EVENT_LENGTH) return 0; - snprintf(evt_path, MAXPATHLEN, "%s/%s/%s/id", default_debugfs_path, - sys_name, evt_name); + snprintf(evt_path, MAXPATHLEN, "%s/%s/%s/id", debugfs_path, + sys_name, evt_name); fd = open(evt_path, O_RDONLY); if (fd < 0) return 0; @@ -568,10 +569,10 @@ static void print_tracepoint_events(void) struct stat st; char evt_path[MAXPATHLEN]; - if (valid_debugfs_mount()) + if (valid_debugfs_mount(debugfs_path)) return; - sys_dir = opendir(default_debugfs_path); + sys_dir = opendir(debugfs_path); if (!sys_dir) goto cleanup; diff --git a/tools/perf/util/parse-events.h b/tools/perf/util/parse-events.h index e3d552908e6..1ea5d09b6eb 100644 --- a/tools/perf/util/parse-events.h +++ b/tools/perf/util/parse-events.h @@ -3,6 +3,8 @@ * Parse symbolic events/counts passed in as options: */ +struct option; + extern int nr_counters; extern struct perf_counter_attr attrs[MAX_COUNTERS]; @@ -15,3 +17,6 @@ extern int parse_events(const struct option *opt, const char *str, int unset); extern void print_events(void); +extern char debugfs_path[]; +extern int valid_debugfs_mount(const char *debugfs); + diff --git a/tools/perf/util/string.h b/tools/perf/util/string.h index 3dca2f654cd..bf39dfadfd2 100644 --- a/tools/perf/util/string.h +++ b/tools/perf/util/string.h @@ -5,4 +5,7 @@ int hex2u64(const char *ptr, u64 *val); +#define _STR(x) #x +#define STR(x) _STR(x) + #endif -- cgit v1.2.3 From d20ff6bd6bba2e7e6681fa17565347b410c46ab3 Mon Sep 17 00:00:00 2001 From: Mike Galbraith Date: Mon, 20 Jul 2009 14:01:38 +0200 Subject: perf_counter tools: Fix vmlinux symbol generation breakage vmlinux meets the criteria for symbol adjustment, which breaks vmlinux generated symbols. Fix this by exempting vmlinux. This is a bit fragile in that someone could change the kernel dso's name, but currently that name is also hardwired. Signed-off-by: Mike Galbraith Cc: Ingo Molnar Signed-off-by: Peter Zijlstra LKML-Reference: <1248091298.18702.18.camel@marge.simson.net> --- tools/perf/util/symbol.c | 7 +++++-- 1 file changed, 5 insertions(+), 2 deletions(-) diff --git a/tools/perf/util/symbol.c b/tools/perf/util/symbol.c index 98aee922acc..28106059bf1 100644 --- a/tools/perf/util/symbol.c +++ b/tools/perf/util/symbol.c @@ -525,7 +525,7 @@ static int dso__load_sym(struct dso *self, int fd, const char *name, GElf_Sym sym; Elf_Scn *sec, *sec_strndx; Elf *elf; - int nr = 0; + int nr = 0, kernel = !strcmp("[kernel]", self->name); elf = elf_begin(fd, ELF_C_READ_MMAP, NULL); if (elf == NULL) { @@ -571,10 +571,13 @@ static int dso__load_sym(struct dso *self, int fd, const char *name, nr_syms = shdr.sh_size / shdr.sh_entsize; memset(&sym, 0, sizeof(sym)); - self->adjust_symbols = (ehdr.e_type == ET_EXEC || + if (!kernel) { + self->adjust_symbols = (ehdr.e_type == ET_EXEC || elf_section_by_name(elf, &ehdr, &shdr, ".gnu.prelink_undo", NULL) != NULL); + } else self->adjust_symbols = 0; + elf_symtab__for_each_symbol(syms, nr_syms, index, sym) { struct symbol *f; const char *name; -- cgit v1.2.3 From 0fdc7e67dd312986e30b861adff48732bd33eb3f Mon Sep 17 00:00:00 2001 From: Mike Galbraith Date: Tue, 21 Jul 2009 10:30:36 +0200 Subject: perf_counter tools: Give perf top inherit option Currently, perf top -p only tracks the pid provided, which isn't very useful for watching forky loads, so give it an inherit option. Signed-off-by: Mike Galbraith Cc: Ingo Molnar Signed-off-by: Peter Zijlstra LKML-Reference: <1248165036.9795.10.camel@marge.simson.net> --- tools/perf/builtin-top.c | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-) diff --git a/tools/perf/builtin-top.c b/tools/perf/builtin-top.c index 95d5c0ae375..c0a423004e1 100644 --- a/tools/perf/builtin-top.c +++ b/tools/perf/builtin-top.c @@ -58,6 +58,7 @@ static u64 count_filter = 5; static int print_entries = 15; static int target_pid = -1; +static int inherit = 0; static int profile_cpu = -1; static int nr_cpus = 0; static unsigned int realtime_prio = 0; @@ -549,7 +550,7 @@ int group_fd; static void start_counter(int i, int counter) { struct perf_counter_attr *attr; - unsigned int cpu; + int cpu; cpu = profile_cpu; if (target_pid == -1 && profile_cpu == -1) @@ -559,6 +560,7 @@ static void start_counter(int i, int counter) attr->sample_type = PERF_SAMPLE_IP | PERF_SAMPLE_TID; attr->freq = freq; + attr->inherit = (cpu < 0) && inherit; try_again: fd[i][counter] = sys_perf_counter_open(attr, target_pid, cpu, group_fd, 0); @@ -685,6 +687,8 @@ static const struct option options[] = { "only display functions with more events than this"), OPT_BOOLEAN('g', "group", &group, "put the counters into a counter group"), + OPT_BOOLEAN('i', "inherit", &inherit, + "child tasks inherit counters"), OPT_STRING('s', "sym-filter", &sym_filter, "pattern", "only display symbols matchig this pattern"), OPT_BOOLEAN('z', "zero", &zero, -- cgit v1.2.3 From 4012ade9338c05428162e85cc9b149dcadf1ce85 Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Wed, 22 Jul 2009 18:15:10 +0200 Subject: ALSA: hda - Restore GPIO1 properly at resume with AD1984A The commit 099db17e66294b02814dee01c81d9abbbeece93e introduced a regression at suspend/resume where the GPIO1 bit isn't properly restored, thus the speaker output gets muted initially after resume. The fix is simple, use the cached write for storing GPIO data. Reference: Novell bnc#522764 https://bugzilla.novell.com/show_bug.cgi?id=522764 Signed-off-by: Takashi Iwai --- sound/pci/hda/patch_analog.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/sound/pci/hda/patch_analog.c b/sound/pci/hda/patch_analog.c index f795ee588cc..e8e6a43865c 100644 --- a/sound/pci/hda/patch_analog.c +++ b/sound/pci/hda/patch_analog.c @@ -3742,7 +3742,7 @@ static int ad1884a_mobile_master_sw_put(struct snd_kcontrol *kcontrol, int mute = (!ucontrol->value.integer.value[0] && !ucontrol->value.integer.value[1]); /* toggle GPIO1 according to the mute state */ - snd_hda_codec_write(codec, 0x01, 0, AC_VERB_SET_GPIO_DATA, + snd_hda_codec_write_cache(codec, 0x01, 0, AC_VERB_SET_GPIO_DATA, mute ? 0x02 : 0x0); return ret; } -- cgit v1.2.3 From 24c30dbbcdda9aeccb23b4eecb6bb8e538742ea4 Mon Sep 17 00:00:00 2001 From: Anton Vorontsov Date: Thu, 16 Jul 2009 21:31:31 +0000 Subject: of/mdio: Add support function for Ethernet fixed-link property Fixed-link support is broken for the ucc_eth, gianfar, and fs_enet device drivers. The "OF MDIO rework" patches removed most of the support. Instead of re-adding fixed-link stuff to the drivers, this patch adds a support function for parsing the fixed-link property and obtaining a dummy phy to match. Note: the dummy phy handling in arch/powerpc is a bit of a hack and needs to be reworked. This function is being added now to solve the regression in the Ethernet drivers, but it should be considered a temporary measure until the fixed link handling can be reworked. Signed-off-by: Anton Vorontsov Signed-off-by: Grant Likely Signed-off-by: David S. Miller --- drivers/of/of_mdio.c | 42 ++++++++++++++++++++++++++++++++++++++++++ include/linux/of_mdio.h | 3 +++ 2 files changed, 45 insertions(+) diff --git a/drivers/of/of_mdio.c b/drivers/of/of_mdio.c index aee967d7f76..bacaa536fd5 100644 --- a/drivers/of/of_mdio.c +++ b/drivers/of/of_mdio.c @@ -9,6 +9,10 @@ * out of the OpenFirmware device tree and using it to populate an mii_bus. */ +#include +#include +#include +#include #include #include #include @@ -137,3 +141,41 @@ struct phy_device *of_phy_connect(struct net_device *dev, return phy_connect_direct(dev, phy, hndlr, flags, iface) ? NULL : phy; } EXPORT_SYMBOL(of_phy_connect); + +/** + * of_phy_connect_fixed_link - Parse fixed-link property and return a dummy phy + * @dev: pointer to net_device claiming the phy + * @hndlr: Link state callback for the network device + * @iface: PHY data interface type + * + * This function is a temporary stop-gap and will be removed soon. It is + * only to support the fs_enet, ucc_geth and gianfar Ethernet drivers. Do + * not call this function from new drivers. + */ +struct phy_device *of_phy_connect_fixed_link(struct net_device *dev, + void (*hndlr)(struct net_device *), + phy_interface_t iface) +{ + struct device_node *net_np; + char bus_id[MII_BUS_ID_SIZE + 3]; + struct phy_device *phy; + const u32 *phy_id; + int sz; + + if (!dev->dev.parent) + return NULL; + + net_np = dev_archdata_get_node(&dev->dev.parent->archdata); + if (!net_np) + return NULL; + + phy_id = of_get_property(net_np, "fixed-link", &sz); + if (!phy_id || sz < sizeof(*phy_id)) + return NULL; + + sprintf(bus_id, PHY_ID_FMT, "0", phy_id[0]); + + phy = phy_connect(dev, bus_id, hndlr, 0, iface); + return IS_ERR(phy) ? NULL : phy; +} +EXPORT_SYMBOL(of_phy_connect_fixed_link); diff --git a/include/linux/of_mdio.h b/include/linux/of_mdio.h index c9663c69030..53b94e025c7 100644 --- a/include/linux/of_mdio.h +++ b/include/linux/of_mdio.h @@ -18,5 +18,8 @@ extern struct phy_device *of_phy_connect(struct net_device *dev, struct device_node *phy_np, void (*hndlr)(struct net_device *), u32 flags, phy_interface_t iface); +extern struct phy_device *of_phy_connect_fixed_link(struct net_device *dev, + void (*hndlr)(struct net_device *), + phy_interface_t iface); #endif /* __LINUX_OF_MDIO_H */ -- cgit v1.2.3 From eedbc705f9a094560b8d08c58b6787a5420a76a1 Mon Sep 17 00:00:00 2001 From: Anton Vorontsov Date: Thu, 16 Jul 2009 21:31:36 +0000 Subject: fs_enet: Revive fixed link support Since commit aa73832c5a80d6c52c69b18af858d88fa595dd3c ("Rework fs_enet driver to use of_mdio infrastructure") the fixed-link support is broken in the fs_enet driver. This patch fixes the support by removing a check for phy_node, and adding a call to of_phy_connect_fixed_link(). Also set netdev parent device via SET_NETDEV_DEV() call, this is needed so that OF MDIO core could find a node pointer for a device. Plus, fix "if (IS_ERR(phydev))" check, in case of errors, of_phy_connect() returns NULL, not ERR_PTR as phy_connect(). Signed-off-by: Anton Vorontsov Signed-off-by: Grant Likely Signed-off-by: David S. Miller --- drivers/net/fs_enet/fs_enet-main.c | 20 ++++++++++---------- 1 file changed, 10 insertions(+), 10 deletions(-) diff --git a/drivers/net/fs_enet/fs_enet-main.c b/drivers/net/fs_enet/fs_enet-main.c index b892c3ad9a7..2bc2d2b2064 100644 --- a/drivers/net/fs_enet/fs_enet-main.c +++ b/drivers/net/fs_enet/fs_enet-main.c @@ -754,17 +754,16 @@ static int fs_init_phy(struct net_device *dev) fep->oldlink = 0; fep->oldspeed = 0; fep->oldduplex = -1; - if(fep->fpi->phy_node) - phydev = of_phy_connect(dev, fep->fpi->phy_node, - &fs_adjust_link, 0, - PHY_INTERFACE_MODE_MII); - else { - printk("No phy bus ID specified in BSP code\n"); - return -EINVAL; + + phydev = of_phy_connect(dev, fep->fpi->phy_node, &fs_adjust_link, 0, + PHY_INTERFACE_MODE_MII); + if (!phydev) { + phydev = of_phy_connect_fixed_link(dev, &fs_adjust_link, + PHY_INTERFACE_MODE_MII); } - if (IS_ERR(phydev)) { - printk(KERN_ERR "%s: Could not attach to PHY\n", dev->name); - return PTR_ERR(phydev); + if (!phydev) { + dev_err(&dev->dev, "Could not attach to PHY\n"); + return -ENODEV; } fep->phydev = phydev; @@ -1005,6 +1004,7 @@ static int __devinit fs_enet_probe(struct of_device *ofdev, goto out_free_fpi; } + SET_NETDEV_DEV(ndev, &ofdev->dev); dev_set_drvdata(&ofdev->dev, ndev); fep = netdev_priv(ndev); -- cgit v1.2.3 From 1db780f8c7d361fe1b7d29b9dc849b97955ae944 Mon Sep 17 00:00:00 2001 From: Anton Vorontsov Date: Thu, 16 Jul 2009 21:31:42 +0000 Subject: gianfar: Revive fixed link support Since commit fe192a49118f5b1272317d60c7930ece4e13ae49 ("Rework gianfar driver to use of_mdio infrastructure") the fixed-link support is broken, the driver oopses at init_phy(): Unable to handle kernel paging request for data at address 0x000000e4 Faulting instruction address: 0xc01cf298 Oops: Kernel access of bad area, sig: 11 [#1] [...] NIP [c01cf298] init_phy+0x80/0xdc LR [c01cf250] init_phy+0x38/0xdc Call Trace: [cf81fe80] [c01d1cf8] gfar_enet_open+0x6c/0x19c [cf81fea0] [c024494c] dev_open+0xfc/0x134 [cf81fec0] [c0242edc] dev_change_flags+0x84/0x1ac [cf81fee0] [c0399ee0] ic_open_devs+0x168/0x2d8 [cf81ff20] [c039b2e8] ip_auto_config+0x90/0x2a4 [cf81ff60] [c0003884] do_one_initcall+0x34/0x1a8 This patch fixes the oops, and removes phy_node checks, and adds a call to of_phy_connect_fixed_link() if a phy isn't attached.. Also, remove an old fixed-link code that we don't use any longer. Signed-off-by: Anton Vorontsov Signed-off-by: Grant Likely Signed-off-by: David S. Miller --- drivers/net/gianfar.c | 24 ++++++++---------------- 1 file changed, 8 insertions(+), 16 deletions(-) diff --git a/drivers/net/gianfar.c b/drivers/net/gianfar.c index 43d813ed9f4..f8ffcbf0bc3 100644 --- a/drivers/net/gianfar.c +++ b/drivers/net/gianfar.c @@ -264,15 +264,6 @@ static int gfar_of_init(struct net_device *dev) priv->device_flags |= FSL_GIANFAR_DEV_HAS_MAGIC_PACKET; priv->phy_node = of_parse_phandle(np, "phy-handle", 0); - if (!priv->phy_node) { - u32 *fixed_link; - - fixed_link = (u32 *)of_get_property(np, "fixed-link", NULL); - if (!fixed_link) { - err = -ENODEV; - goto err_out; - } - } /* Find the TBI PHY. If it's not there, we don't support SGMII */ priv->tbi_node = of_parse_phandle(np, "tbi-handle", 0); @@ -659,13 +650,14 @@ static int init_phy(struct net_device *dev) interface = gfar_get_interface(dev); - if (priv->phy_node) { - priv->phydev = of_phy_connect(dev, priv->phy_node, &adjust_link, - 0, interface); - if (!priv->phydev) { - dev_err(&dev->dev, "error: Could not attach to PHY\n"); - return -ENODEV; - } + priv->phydev = of_phy_connect(dev, priv->phy_node, &adjust_link, 0, + interface); + if (!priv->phydev) + priv->phydev = of_phy_connect_fixed_link(dev, &adjust_link, + interface); + if (!priv->phydev) { + dev_err(&dev->dev, "could not attach to PHY\n"); + return -ENODEV; } if (interface == PHY_INTERFACE_MODE_SGMII) -- cgit v1.2.3 From 3104a6ff67e484e4dc84822b4ed0396e85bb9fb9 Mon Sep 17 00:00:00 2001 From: Anton Vorontsov Date: Thu, 16 Jul 2009 21:31:47 +0000 Subject: ucc_geth: Revive fixed link support Since commit 0b9da337dca972e7a4144e298ec3adb8f244d4a4 ("Rework ucc_geth driver to use of_mdio infrastructure") the fixed-link support is broken. This patch fixes the support by removing !ug_info->phy_node check, and adds a call to of_phy_connect_fixed_link() if a phy is not attached to the MAC. Also, remove an old fixed-link code that we don't use any longer. Signed-off-by: Anton Vorontsov Signed-off-by: Grant Likely Signed-off-by: David S. Miller --- drivers/net/ucc_geth.c | 23 +++++++---------------- 1 file changed, 7 insertions(+), 16 deletions(-) diff --git a/drivers/net/ucc_geth.c b/drivers/net/ucc_geth.c index 40c6eba775c..3b957e6412e 100644 --- a/drivers/net/ucc_geth.c +++ b/drivers/net/ucc_geth.c @@ -1590,13 +1590,13 @@ static int init_phy(struct net_device *dev) priv->oldspeed = 0; priv->oldduplex = -1; - if (!ug_info->phy_node) - return 0; - phydev = of_phy_connect(dev, ug_info->phy_node, &adjust_link, 0, priv->phy_interface); + if (!phydev) + phydev = of_phy_connect_fixed_link(dev, &adjust_link, + priv->phy_interface); if (!phydev) { - printk("%s: Could not attach to PHY\n", dev->name); + dev_err(&dev->dev, "Could not attach to PHY\n"); return -ENODEV; } @@ -3608,9 +3608,7 @@ static int ucc_geth_probe(struct of_device* ofdev, const struct of_device_id *ma struct ucc_geth_private *ugeth = NULL; struct ucc_geth_info *ug_info; struct resource res; - struct device_node *phy; int err, ucc_num, max_speed = 0; - const u32 *fixed_link; const unsigned int *prop; const char *sprop; const void *mac_addr; @@ -3708,15 +3706,8 @@ static int ucc_geth_probe(struct of_device* ofdev, const struct of_device_id *ma ug_info->uf_info.regs = res.start; ug_info->uf_info.irq = irq_of_parse_and_map(np, 0); - fixed_link = of_get_property(np, "fixed-link", NULL); - if (fixed_link) { - phy = NULL; - } else { - phy = of_parse_phandle(np, "phy-handle", 0); - if (phy == NULL) - return -ENODEV; - } - ug_info->phy_node = phy; + + ug_info->phy_node = of_parse_phandle(np, "phy-handle", 0); /* Find the TBI PHY node. If it's not there, we don't support SGMII */ ug_info->tbi_node = of_parse_phandle(np, "tbi-handle", 0); @@ -3725,7 +3716,7 @@ static int ucc_geth_probe(struct of_device* ofdev, const struct of_device_id *ma prop = of_get_property(np, "phy-connection-type", NULL); if (!prop) { /* handle interface property present in old trees */ - prop = of_get_property(phy, "interface", NULL); + prop = of_get_property(ug_info->phy_node, "interface", NULL); if (prop != NULL) { phy_interface = enet_to_phy_interface[*prop]; max_speed = enet_to_speed[*prop]; -- cgit v1.2.3 From fa77406aee9d33f35c7202dcd83436feb12d9fc3 Mon Sep 17 00:00:00 2001 From: Ajit Khaparde Date: Wed, 22 Jul 2009 09:28:55 -0700 Subject: be2net: Bug fix in the non-lro path. Size of received packet was not updated in statistics properly. This patch fixes a bug in the non-lro path. Wrong size of received packet was being passed for updating receive statistics. This patch is against the net-2.6 git. Signed-off-by: Ajit Khaparde Signed-off-by: David S. Miller --- drivers/net/benet/be_main.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/drivers/net/benet/be_main.c b/drivers/net/benet/be_main.c index c43f6a11929..dea3155688b 100644 --- a/drivers/net/benet/be_main.c +++ b/drivers/net/benet/be_main.c @@ -667,7 +667,7 @@ static void skb_fill_rx_data(struct be_adapter *adapter, struct be_queue_info *rxq = &adapter->rx_obj.q; struct be_rx_page_info *page_info; u16 rxq_idx, i, num_rcvd, j; - u32 pktsize, hdr_len, curr_frag_len; + u32 pktsize, hdr_len, curr_frag_len, size; u8 *start; rxq_idx = AMAP_GET_BITS(struct amap_eth_rx_compl, fragndx, rxcp); @@ -708,12 +708,13 @@ static void skb_fill_rx_data(struct be_adapter *adapter, } /* More frags present for this completion */ - pktsize -= curr_frag_len; /* account for above copied frag */ + size = pktsize; for (i = 1, j = 0; i < num_rcvd; i++) { + size -= curr_frag_len; index_inc(&rxq_idx, rxq->len); page_info = get_rx_page_info(adapter, rxq_idx); - curr_frag_len = min(pktsize, rx_frag_size); + curr_frag_len = min(size, rx_frag_size); /* Coalesce all frags from the same physical page in one slot */ if (page_info->page_offset == 0) { @@ -731,7 +732,6 @@ static void skb_fill_rx_data(struct be_adapter *adapter, skb_shinfo(skb)->frags[j].size += curr_frag_len; skb->len += curr_frag_len; skb->data_len += curr_frag_len; - pktsize -= curr_frag_len; memset(page_info, 0, sizeof(*page_info)); } -- cgit v1.2.3 From 0dc3d523e8bc4718e0be2e4a742367d6e4be77cd Mon Sep 17 00:00:00 2001 From: Arjan van de Ven Date: Tue, 21 Jul 2009 00:55:05 -0700 Subject: perf: fix stack data leak the "reserved" field was not initialized to zero, resulting in 4 bytes of stack data leaking to userspace.... Signed-off-by: Arjan van de Ven Acked-by: Peter Zijlstra Signed-off-by: Linus Torvalds --- kernel/perf_counter.c | 1 + 1 file changed, 1 insertion(+) diff --git a/kernel/perf_counter.c b/kernel/perf_counter.c index a641eb753b8..7bc888dfd06 100644 --- a/kernel/perf_counter.c +++ b/kernel/perf_counter.c @@ -2665,6 +2665,7 @@ static void perf_counter_output(struct perf_counter *counter, int nmi, header.size += sizeof(cpu_entry); cpu_entry.cpu = raw_smp_processor_id(); + cpu_entry.reserved = 0; } if (sample_type & PERF_SAMPLE_PERIOD) -- cgit v1.2.3 From de72e5de062e48a992d6cafe2291a82fe498d641 Mon Sep 17 00:00:00 2001 From: Alexander Beregalov Date: Wed, 22 Jul 2009 01:16:51 +0000 Subject: net: KS8851 needs to depend on MII fix this build error when CONFIG_MII is not set drivers/net/ks8851.c:999: undefined reference to `generic_mii_ioctl' drivers/net/ks8851.c:1050: undefined reference to `mii_link_ok' drivers/net/ks8851.c:1056: undefined reference to `mii_nway_restart' drivers/net/ks8851.c:1044: undefined reference to `mii_ethtool_sset' drivers/net/ks8851.c:1038: undefined reference to `mii_ethtool_gset' Signed-off-by: Alexander Beregalov Acked-by: Ben Dooks --- drivers/net/Kconfig | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig index b5a7513df4e..5f6509a5f64 100644 --- a/drivers/net/Kconfig +++ b/drivers/net/Kconfig @@ -1732,6 +1732,7 @@ config KS8842 config KS8851 tristate "Micrel KS8851 SPI" depends on SPI + select MII help SPI driver for Micrel KS8851 SPI attached network chip. -- cgit v1.2.3 From 2cb078603abb612e3bcd428fb8122c3d39e08832 Mon Sep 17 00:00:00 2001 From: Jeremy Fitzhardinge Date: Wed, 22 Jul 2009 09:59:35 -0700 Subject: x86, amd: Don't probe for extended APIC ID if APICs are disabled If we've logically disabled apics, don't probe the PCI space for the AMD extended APIC ID. [ Impact: prevent boot crash under Xen. ] Signed-off-by: Jeremy Fitzhardinge Reported-by: Bastian Blank Signed-off-by: H. Peter Anvin --- arch/x86/kernel/cpu/amd.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/x86/kernel/cpu/amd.c b/arch/x86/kernel/cpu/amd.c index 28e5f595604..e2485b03f1c 100644 --- a/arch/x86/kernel/cpu/amd.c +++ b/arch/x86/kernel/cpu/amd.c @@ -356,7 +356,7 @@ static void __cpuinit early_init_amd(struct cpuinfo_x86 *c) #endif #if defined(CONFIG_X86_LOCAL_APIC) && defined(CONFIG_PCI) /* check CPU config space for extended APIC ID */ - if (c->x86 >= 0xf) { + if (cpu_has_apic && c->x86 >= 0xf) { unsigned int val; val = read_pci_config(0, 24, 0, 0x68); if ((val & ((1 << 17) | (1 << 18))) == ((1 << 17) | (1 << 18))) -- cgit v1.2.3 From 7b55a4a3f761db7daba1ac526ef60f64f5c53689 Mon Sep 17 00:00:00 2001 From: "Rafael J. Wysocki" Date: Wed, 22 Jul 2009 02:58:55 +0000 Subject: skge: Enable WoL by default if supported If skge hardware is capable of waking up the system from sleep, enable magic packet WoL during driver initialisation. This makes WoL work without calling 'ethtool -s ethX wol g' for each adapter. Signed-off-by: Rafael J. Wysocki Tested-by: Michael Guntsche Acked-by: Stephen Hemminger Signed-off-by: David S. Miller --- drivers/net/skge.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/drivers/net/skge.c b/drivers/net/skge.c index 60d502eef4f..543af2044f4 100644 --- a/drivers/net/skge.c +++ b/drivers/net/skge.c @@ -3854,8 +3854,10 @@ static struct net_device *skge_devinit(struct skge_hw *hw, int port, skge->speed = -1; skge->advertising = skge_supported_modes(hw); - if (device_may_wakeup(&hw->pdev->dev)) + if (device_can_wakeup(&hw->pdev->dev)) { skge->wol = wol_supported(hw) & WAKE_MAGIC; + device_set_wakeup_enable(&hw->pdev->dev, skge->wol); + } hw->dev[port] = dev; -- cgit v1.2.3 From 78a9c9c97455d0f8d2d2098b2252eb4bf65be799 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Uwe=20Kleine-K=C3=B6nig?= Date: Tue, 21 Jul 2009 10:11:39 +0000 Subject: register at91_ether using platform_driver_probe MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit at91ether_probe lives in .init.text, so using platform_driver_register to register it is wrong because binding a device after the init memory is discarded (e.g. via sysfs) results in an oops. As requested by David Brownell platform_driver_probe is used instead of moving the probe function to .devinit.text as proposed initially. This saves some memory, but devices registered after the driver is probed are not bound (probably there are none) and binding via sysfs isn't possible. Signed-off-by: Uwe Kleine-König Acked-by: David Brownell Acked-by: Andrew Victor Signed-off-by: David S. Miller --- drivers/net/arm/at91_ether.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) diff --git a/drivers/net/arm/at91_ether.c b/drivers/net/arm/at91_ether.c index 2e7419a6119..5041d10bae9 100644 --- a/drivers/net/arm/at91_ether.c +++ b/drivers/net/arm/at91_ether.c @@ -1228,7 +1228,6 @@ static int at91ether_resume(struct platform_device *pdev) #endif static struct platform_driver at91ether_driver = { - .probe = at91ether_probe, .remove = __devexit_p(at91ether_remove), .suspend = at91ether_suspend, .resume = at91ether_resume, @@ -1240,7 +1239,7 @@ static struct platform_driver at91ether_driver = { static int __init at91ether_init(void) { - return platform_driver_register(&at91ether_driver); + return platform_driver_probe(&at91ether_driver, at91ether_probe); } static void __exit at91ether_exit(void) -- cgit v1.2.3 From 023d43c7b5a23a81fe8afa9f37296f8ed4be11fb Mon Sep 17 00:00:00 2001 From: Peter Zijlstra Date: Tue, 21 Jul 2009 10:09:23 +0200 Subject: lockdep: Fix lockdep annotation for pipe_double_lock() The presumed use of the pipe_double_lock() routine is to lock 2 locks in a deadlock free way by ordering the locks by their address. However it fails to keep the specified lock classes in order and explicitly annotates a deadlock. Rectify this. Signed-off-by: Peter Zijlstra Acked-by: Miklos Szeredi LKML-Reference: <1248163763.15751.11098.camel@twins> --- fs/pipe.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/fs/pipe.c b/fs/pipe.c index f7dd21ad85a..52c41511483 100644 --- a/fs/pipe.c +++ b/fs/pipe.c @@ -68,8 +68,8 @@ void pipe_double_lock(struct pipe_inode_info *pipe1, pipe_lock_nested(pipe1, I_MUTEX_PARENT); pipe_lock_nested(pipe2, I_MUTEX_CHILD); } else { - pipe_lock_nested(pipe2, I_MUTEX_CHILD); - pipe_lock_nested(pipe1, I_MUTEX_PARENT); + pipe_lock_nested(pipe2, I_MUTEX_PARENT); + pipe_lock_nested(pipe1, I_MUTEX_CHILD); } } -- cgit v1.2.3 From 29c5e8ce01f9dad7e24b99c21e4f836d6b0289e0 Mon Sep 17 00:00:00 2001 From: Julia Lawall Date: Wed, 22 Jul 2009 16:49:00 -0400 Subject: Btrfs: convert nested spin_lock_irqsave to spin_lock If spin_lock_irqsave is called twice in a row with the same second argument, the interrupt state at the point of the second call overwrites the value saved by the first call. Indeed, the second call does not need to save the interrupt state, so it is changed to a simple spin_lock. Signed-off-by: Julia Lawall Signed-off-by: Chris Mason --- fs/btrfs/async-thread.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/fs/btrfs/async-thread.c b/fs/btrfs/async-thread.c index 6e4f6c50a12..019e8af449a 100644 --- a/fs/btrfs/async-thread.c +++ b/fs/btrfs/async-thread.c @@ -424,11 +424,11 @@ int btrfs_requeue_work(struct btrfs_work *work) * list */ if (worker->idle) { - spin_lock_irqsave(&worker->workers->lock, flags); + spin_lock(&worker->workers->lock); worker->idle = 0; list_move_tail(&worker->worker_list, &worker->workers->worker_list); - spin_unlock_irqrestore(&worker->workers->lock, flags); + spin_unlock(&worker->workers->lock); } if (!worker->working) { wake = 1; -- cgit v1.2.3 From 3acada49c2794c5aac21849e2ea05790c6dd2faa Mon Sep 17 00:00:00 2001 From: David Woodhouse Date: Wed, 22 Jul 2009 16:49:01 -0400 Subject: Btrfs: Remove broken sanity check from btrfs_rmap_block() It was never actually doing anything anyway (see the loop condition), and it would be difficult to make it work for RAID[56]. Even if it was actually working, it's checking for the wrong thing anyway. Instead of checking whether we list a block which _doesn't_ land at the relevant physical location, it should be checking that we _have_ listed all the logical blocks which refer to the required physical location on all devices. This function is only called from remove_sb_from_cache() to ensure that we reserve the logical blocks which would reside at the same physical location as the superblock copies. So listing more blocks than we need is actually OK. With RAID[56] we're going to throw away an entire stripe for each block we have to ignore, so we _are_ going to list blocks other than the ones which actually contain the superblock. Signed-off-by: David Woodhouse Signed-off-by: Chris Mason --- fs/btrfs/volumes.c | 20 -------------------- 1 file changed, 20 deletions(-) diff --git a/fs/btrfs/volumes.c b/fs/btrfs/volumes.c index f057730a72b..55c37276a29 100644 --- a/fs/btrfs/volumes.c +++ b/fs/btrfs/volumes.c @@ -2795,26 +2795,6 @@ int btrfs_rmap_block(struct btrfs_mapping_tree *map_tree, } } - for (i = 0; i > nr; i++) { - struct btrfs_multi_bio *multi; - struct btrfs_bio_stripe *stripe; - int ret; - - length = 1; - ret = btrfs_map_block(map_tree, WRITE, buf[i], - &length, &multi, 0); - BUG_ON(ret); - - stripe = multi->stripes; - for (j = 0; j < multi->num_stripes; j++) { - if (stripe->physical >= physical && - physical < stripe->physical + length) - break; - } - BUG_ON(j >= multi->num_stripes); - kfree(multi); - } - *logical = buf; *naddrs = nr; *stripe_len = map->stripe_len; -- cgit v1.2.3 From 33c17ad5717c887568c1de61f15e5d58ed66d189 Mon Sep 17 00:00:00 2001 From: Julia Lawall Date: Wed, 22 Jul 2009 16:49:01 -0400 Subject: Btrfs: adjust NULL test Move the call to BUG_ON to before the dereference of the tested value. Signed-off-by: Julia Lawall Signed-off-by: Chris Mason --- fs/btrfs/inode.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/fs/btrfs/inode.c b/fs/btrfs/inode.c index a48c084f6d3..3ea827ddf0f 100644 --- a/fs/btrfs/inode.c +++ b/fs/btrfs/inode.c @@ -2607,8 +2607,8 @@ noinline int btrfs_truncate_inode_items(struct btrfs_trans_handle *trans, if (root->ref_cows) btrfs_drop_extent_cache(inode, new_size & (~mask), (u64)-1, 0); path = btrfs_alloc_path(); - path->reada = -1; BUG_ON(!path); + path->reada = -1; /* FIXME, add redo link to tree so we don't leak on crash */ key.objectid = inode->i_ino; -- cgit v1.2.3 From c271b492419a18908ba19ee02b231fb305a27023 Mon Sep 17 00:00:00 2001 From: Daniel Cadete Date: Wed, 22 Jul 2009 16:52:13 -0400 Subject: Btrfs: remove of redundant btrfs_header_level This removes the continues call's of btrfs_header_level. One call of btrfs_header_level(c) its enough. Signed-off-by Daniel Cadete Signed-off-by: Chris Mason --- fs/btrfs/print-tree.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/fs/btrfs/print-tree.c b/fs/btrfs/print-tree.c index 6d6523da0a3..0d126be22b6 100644 --- a/fs/btrfs/print-tree.c +++ b/fs/btrfs/print-tree.c @@ -309,7 +309,7 @@ void btrfs_print_tree(struct btrfs_root *root, struct extent_buffer *c) } printk(KERN_INFO "node %llu level %d total ptrs %d free spc %u\n", (unsigned long long)btrfs_header_bytenr(c), - btrfs_header_level(c), nr, + level, nr, (u32)BTRFS_NODEPTRS_PER_BLOCK(root) - nr); for (i = 0; i < nr; i++) { btrfs_node_key_to_cpu(c, &key, i); @@ -326,10 +326,10 @@ void btrfs_print_tree(struct btrfs_root *root, struct extent_buffer *c) btrfs_level_size(root, level - 1), btrfs_node_ptr_generation(c, i)); if (btrfs_is_leaf(next) && - btrfs_header_level(c) != 1) + level != 1) BUG(); if (btrfs_header_level(next) != - btrfs_header_level(c) - 1) + level - 1) BUG(); btrfs_print_tree(root, next); free_extent_buffer(next); -- cgit v1.2.3 From 83121942b28daffc9526b14b7843d8cdbd3db641 Mon Sep 17 00:00:00 2001 From: David Woodhouse Date: Wed, 22 Jul 2009 16:52:13 -0400 Subject: Btrfs: Fix crash on read failures at mount If the tree roots hit read errors during mount, btrfs is not properly erroring out. We need to check the uptodate bits after reading in the tree root node. Signed-off-by: David Woodhouse Signed-off-by: Chris Mason --- fs/btrfs/disk-io.c | 10 ++++++++++ 1 file changed, 10 insertions(+) diff --git a/fs/btrfs/disk-io.c b/fs/btrfs/disk-io.c index 0d50d49d990..55d9d188e69 100644 --- a/fs/btrfs/disk-io.c +++ b/fs/btrfs/disk-io.c @@ -1783,6 +1783,11 @@ struct btrfs_root *open_ctree(struct super_block *sb, btrfs_super_chunk_root(disk_super), blocksize, generation); BUG_ON(!chunk_root->node); + if (!test_bit(EXTENT_BUFFER_UPTODATE, &chunk_root->node->bflags)) { + printk(KERN_WARNING "btrfs: failed to read chunk root on %s\n", + sb->s_id); + goto fail_chunk_root; + } btrfs_set_root_node(&chunk_root->root_item, chunk_root->node); chunk_root->commit_root = btrfs_root_node(chunk_root); @@ -1810,6 +1815,11 @@ struct btrfs_root *open_ctree(struct super_block *sb, blocksize, generation); if (!tree_root->node) goto fail_chunk_root; + if (!test_bit(EXTENT_BUFFER_UPTODATE, &tree_root->node->bflags)) { + printk(KERN_WARNING "btrfs: failed to read tree root on %s\n", + sb->s_id); + goto fail_tree_root; + } btrfs_set_root_node(&tree_root->root_item, tree_root->node); tree_root->commit_root = btrfs_root_node(tree_root); -- cgit v1.2.3 From ce6e7fcd43aab1f77e56aa36936dd7d2d05a1ffa Mon Sep 17 00:00:00 2001 From: Jeff Layton Date: Wed, 22 Jul 2009 15:08:58 -0400 Subject: cifs: disable serverino if server doesn't support it A recent regression when dealing with older servers. This bug was introduced when we made serverino the default... When the server can't provide inode numbers, disable it for the mount. Signed-off-by: Jeff Layton Signed-off-by: Steve French --- fs/cifs/inode.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) diff --git a/fs/cifs/inode.c b/fs/cifs/inode.c index 18afe57b246..b6a47b32f21 100644 --- a/fs/cifs/inode.c +++ b/fs/cifs/inode.c @@ -513,9 +513,12 @@ int cifs_get_inode_info(struct inode **pinode, cifs_sb->mnt_cifs_flags & CIFS_MOUNT_MAP_SPECIAL_CHR); if (rc1) { - /* BB EOPNOSUPP disable SERVER_INUM? */ cFYI(1, ("GetSrvInodeNum rc %d", rc1)); fattr.cf_uniqueid = iunique(sb, ROOT_I); + /* disable serverino if call not supported */ + if (rc1 == -EINVAL) + cifs_sb->mnt_cifs_flags &= + ~CIFS_MOUNT_SERVER_INUM; } } else { fattr.cf_uniqueid = iunique(sb, ROOT_I); -- cgit v1.2.3 From 03aa3a49ad3592a9e4e1ab19c6da3e852288caf1 Mon Sep 17 00:00:00 2001 From: Jeff Layton Date: Tue, 21 Jul 2009 19:42:03 -0400 Subject: cifs: fix sb->s_maxbytes so that it casts properly to a signed value This off-by-one bug causes sendfile() to not work properly. When a task calls sendfile() on a file on a CIFS filesystem, the syscall returns -1 and sets errno to EOVERFLOW. do_sendfile uses s_maxbytes to verify the returned offset of the file. The problem there is that this value is cast to a signed value (loff_t). When this is done on the s_maxbytes value that cifs uses, it becomes negative and the comparisons against it fail. Even though s_maxbytes is an unsigned value, it seems that it's not OK to set it in such a way that it'll end up negative when it's cast to a signed value. These casts happen in other codepaths besides sendfile too, but the VFS is a little hard to follow in this area and I can't be sure if there are other bugs that this will fix. It's not clear to me why s_maxbytes isn't just declared as loff_t in the first place, but either way we still need to fix these values to make sendfile work properly. This is also an opportunity to replace the magic bit-shift values here with the standard #defines for this. This fixes the reproducer program I have that does a sendfile and will probably also fix the situation where apache is serving from a CIFS share. Acked-by: Johannes Weiner Signed-off-by: Jeff Layton Signed-off-by: Steve French --- fs/cifs/connect.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/fs/cifs/connect.c b/fs/cifs/connect.c index 9bb5c875073..fc44d316d0b 100644 --- a/fs/cifs/connect.c +++ b/fs/cifs/connect.c @@ -2452,10 +2452,10 @@ try_mount_again: tcon->local_lease = volume_info->local_lease; } if (pSesInfo) { - if (pSesInfo->capabilities & CAP_LARGE_FILES) { - sb->s_maxbytes = (u64) 1 << 63; - } else - sb->s_maxbytes = (u64) 1 << 31; /* 2 GB */ + if (pSesInfo->capabilities & CAP_LARGE_FILES) + sb->s_maxbytes = MAX_LFS_FILESIZE; + else + sb->s_maxbytes = MAX_NON_LFS; } /* BB FIXME fix time_gran to be larger for LANMAN sessions */ -- cgit v1.2.3 From 61f3826133dc07142935fb5712fc738e19eb5575 Mon Sep 17 00:00:00 2001 From: Bruno Premont Date: Wed, 22 Jul 2009 22:22:32 +0200 Subject: genirq: Fix UP compile failure caused by irq_thread_check_affinity Since genirq: Delegate irq affinity setting to the irq thread (591d2fb02ea80472d846c0b8507007806bdd69cc) compilation with CONFIG_SMP=n fails with following error: /usr/src/linux-2.6/kernel/irq/manage.c: In function 'irq_thread_check_affinity': /usr/src/linux-2.6/kernel/irq/manage.c:475: error: 'struct irq_desc' has no member named 'affinity' make[4]: *** [kernel/irq/manage.o] Error 1 That commit adds a new function irq_thread_check_affinity() which uses struct irq_desc.affinity which is only available for CONFIG_SMP=y. Move that function under #ifdef CONFIG_SMP. [ tglx@brownpaperbag: compile and boot tested on UP and SMP ] Signed-off-by: Bruno Premont LKML-Reference: <20090722222232.2eb3e1c4@neptune.home> Signed-off-by: Thomas Gleixner --- kernel/irq/manage.c | 5 +++++ 1 file changed, 5 insertions(+) diff --git a/kernel/irq/manage.c b/kernel/irq/manage.c index f0de36f13a4..61c679db468 100644 --- a/kernel/irq/manage.c +++ b/kernel/irq/manage.c @@ -451,6 +451,7 @@ static int irq_wait_for_interrupt(struct irqaction *action) return -1; } +#ifdef CONFIG_SMP /* * Check whether we need to change the affinity of the interrupt thread. */ @@ -478,6 +479,10 @@ irq_thread_check_affinity(struct irq_desc *desc, struct irqaction *action) set_cpus_allowed_ptr(current, mask); free_cpumask_var(mask); } +#else +static inline void +irq_thread_check_affinity(struct irq_desc *desc, struct irqaction *action) { } +#endif /* * Interrupt handler thread -- cgit v1.2.3 From f1230c97978f52268d8c66e6f88e54c3d2092a75 Mon Sep 17 00:00:00 2001 From: Steve French Date: Wed, 22 Jul 2009 23:13:01 +0000 Subject: [CIFS] fix sparse warning Signed-off-by: Steve French --- fs/cifs/inode.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/fs/cifs/inode.c b/fs/cifs/inode.c index b6a47b32f21..82d83839655 100644 --- a/fs/cifs/inode.c +++ b/fs/cifs/inode.c @@ -212,7 +212,7 @@ cifs_unix_basic_to_fattr(struct cifs_fattr *fattr, FILE_UNIX_BASIC_INFO *info, * junction to the new submount (ie to setup the fake directory * which represents a DFS referral). */ -void +static void cifs_create_dfs_fattr(struct cifs_fattr *fattr, struct super_block *sb) { struct cifs_sb_info *cifs_sb = CIFS_SB(sb); @@ -388,7 +388,7 @@ static int cifs_sfu_mode(struct cifs_fattr *fattr, const unsigned char *path, } /* Fill a cifs_fattr struct with info from FILE_ALL_INFO */ -void +static void cifs_all_info_to_fattr(struct cifs_fattr *fattr, FILE_ALL_INFO *info, struct cifs_sb_info *cifs_sb, bool adjust_tz) { -- cgit v1.2.3 From 4be3bd7849165e7efa6b0b35a23d6a3598d97465 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Wed, 22 Jul 2009 19:32:59 -0700 Subject: Linux 2.6.31-rc4 --- Makefile | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/Makefile b/Makefile index 79957b33877..063d738405e 100644 --- a/Makefile +++ b/Makefile @@ -1,7 +1,7 @@ VERSION = 2 PATCHLEVEL = 6 SUBLEVEL = 31 -EXTRAVERSION = -rc3 +EXTRAVERSION = -rc4 NAME = Man-Eating Seals of Antiquity # *DOCUMENTATION* -- cgit v1.2.3 From e3d433040ee6077e33d4ad22e2f60a38b085786d Mon Sep 17 00:00:00 2001 From: Joe Perches Date: Sun, 28 Jun 2009 09:26:20 -0700 Subject: drivers/dma/fsldma.c: Remove unnecessary semicolons Signed-off-by: Joe Perches Signed-off-by: Dan Williams --- drivers/dma/fsldma.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/dma/fsldma.c b/drivers/dma/fsldma.c index 6e60c77a145..ef87a898414 100644 --- a/drivers/dma/fsldma.c +++ b/drivers/dma/fsldma.c @@ -142,7 +142,7 @@ static int dma_is_idle(struct fsl_dma_chan *fsl_chan) static void dma_start(struct fsl_dma_chan *fsl_chan) { - u32 mr_set = 0;; + u32 mr_set = 0; if (fsl_chan->feature & FSL_DMA_CHAN_PAUSE_EXT) { DMA_OUT(fsl_chan, &fsl_chan->reg_base->bcr, 0, 32); -- cgit v1.2.3 From c019894efc9c9ba5939948caa78c133b1ec8ae63 Mon Sep 17 00:00:00 2001 From: Joe Perches Date: Sun, 28 Jun 2009 09:26:21 -0700 Subject: drivers/dma: Remove unnecessary semicolons Signed-off-by: Joe Perches Signed-off-by: Dan Williams --- drivers/dma/dmatest.c | 2 +- drivers/dma/mv_xor.c | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/dma/dmatest.c b/drivers/dma/dmatest.c index fb7da5141e9..cec1ec0b7d0 100644 --- a/drivers/dma/dmatest.c +++ b/drivers/dma/dmatest.c @@ -114,7 +114,7 @@ static void dmatest_init_srcs(u8 **bufs, unsigned int start, unsigned int len) buf[i] = PATTERN_SRC | (~i & PATTERN_COUNT_MASK); for ( ; i < start + len; i++) buf[i] = PATTERN_SRC | PATTERN_COPY - | (~i & PATTERN_COUNT_MASK);; + | (~i & PATTERN_COUNT_MASK); for ( ; i < test_buf_size; i++) buf[i] = PATTERN_SRC | (~i & PATTERN_COUNT_MASK); buf++; diff --git a/drivers/dma/mv_xor.c b/drivers/dma/mv_xor.c index ddab94f5122..3f23eabe09f 100644 --- a/drivers/dma/mv_xor.c +++ b/drivers/dma/mv_xor.c @@ -1176,7 +1176,7 @@ static int __devinit mv_xor_probe(struct platform_device *pdev) if (dma_has_cap(DMA_MEMSET, dma_dev->cap_mask)) dma_dev->device_prep_dma_memset = mv_xor_prep_dma_memset; if (dma_has_cap(DMA_XOR, dma_dev->cap_mask)) { - dma_dev->max_xor = 8; ; + dma_dev->max_xor = 8; dma_dev->device_prep_dma_xor = mv_xor_prep_dma_xor; } -- cgit v1.2.3 From 0a2ff57d6fba92842272889b4bca447344cd9d36 Mon Sep 17 00:00:00 2001 From: Nicolas Ferre Date: Fri, 3 Jul 2009 19:26:51 +0200 Subject: dmaengine: dmatest: add a maximum number of test iterations The dmatest usually waits for the killing of its kthreads to stop running tests. This patch adds a parameter that sets a maximum number of test iterations. This feature is quite interesting for debugging when you set a lot of traces in your dmaengine controller driver. Signed-off-by: Nicolas Ferre Cc: Haavard Skinnemoen Acked-by: Maciej Sosnowski Signed-off-by: Andrew Morton Signed-off-by: Dan Williams --- drivers/dma/dmatest.c | 15 ++++++++++++++- 1 file changed, 14 insertions(+), 1 deletion(-) diff --git a/drivers/dma/dmatest.c b/drivers/dma/dmatest.c index cec1ec0b7d0..2d973d60e7b 100644 --- a/drivers/dma/dmatest.c +++ b/drivers/dma/dmatest.c @@ -38,6 +38,11 @@ module_param(max_channels, uint, S_IRUGO); MODULE_PARM_DESC(max_channels, "Maximum number of channels to use (default: all)"); +static unsigned int iterations; +module_param(iterations, uint, S_IRUGO); +MODULE_PARM_DESC(iterations, + "Iterations before stopping test (default: infinite)"); + static unsigned int xor_sources = 3; module_param(xor_sources, uint, S_IRUGO); MODULE_PARM_DESC(xor_sources, @@ -270,7 +275,8 @@ static int dmatest_func(void *data) flags = DMA_CTRL_ACK | DMA_COMPL_SKIP_DEST_UNMAP | DMA_PREP_INTERRUPT; - while (!kthread_should_stop()) { + while (!kthread_should_stop() + && !(iterations && total_tests >= iterations)) { struct dma_device *dev = chan->device; struct dma_async_tx_descriptor *tx = NULL; dma_addr_t dma_srcs[src_cnt]; @@ -416,6 +422,13 @@ err_srcbuf: err_srcs: pr_notice("%s: terminating after %u tests, %u failures (status %d)\n", thread_name, total_tests, failed_tests, ret); + + if (iterations > 0) + while (!kthread_should_stop()) { + DECLARE_WAIT_QUEUE_HEAD(wait_dmatest_exit); + interruptible_sleep_on(&wait_dmatest_exit); + } + return ret; } -- cgit v1.2.3 From f1aef8b6e6abf32a3a269542f95a19e2cb319f6c Mon Sep 17 00:00:00 2001 From: Nicolas Ferre Date: Mon, 6 Jul 2009 18:19:44 +0200 Subject: dmaengine: dmatest: correct thread_count while using multiple thread per channel It seems that thread_count is not properly calculated in dmatest. In fact the thread count number that is returned from dmatest_add_threads() is not correctly added to the thread_count and thus not properly printed. Signed-off-by: Nicolas Ferre Acked-by: Haavard Skinnemoen Acked-by: Maciej Sosnowski Signed-off-by: Andrew Morton Signed-off-by: Dan Williams --- drivers/dma/dmatest.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/dma/dmatest.c b/drivers/dma/dmatest.c index 2d973d60e7b..d93017fc787 100644 --- a/drivers/dma/dmatest.c +++ b/drivers/dma/dmatest.c @@ -508,11 +508,11 @@ static int dmatest_add_channel(struct dma_chan *chan) if (dma_has_cap(DMA_MEMCPY, dma_dev->cap_mask)) { cnt = dmatest_add_threads(dtc, DMA_MEMCPY); - thread_count += cnt > 0 ?: 0; + thread_count += cnt > 0 ? cnt : 0; } if (dma_has_cap(DMA_XOR, dma_dev->cap_mask)) { cnt = dmatest_add_threads(dtc, DMA_XOR); - thread_count += cnt > 0 ?: 0; + thread_count += cnt > 0 ? cnt : 0; } pr_info("dmatest: Started %u threads using %s\n", -- cgit v1.2.3 From dc78baa2b90b289590911b40b6800f77d0dc935a Mon Sep 17 00:00:00 2001 From: Nicolas Ferre Date: Fri, 3 Jul 2009 19:24:33 +0200 Subject: dmaengine: at_hdmac: new driver for the Atmel AHB DMA Controller This AHB DMA Controller (aka HDMA or DMAC on AT91 systems) is availlable on at91sam9rl chip. It will be used on other products in the future. This first release covers only the memory-to-memory tranfer type. This is the only tranfer type supported by this chip. On other products, it will be used also for peripheral DMA transfer (slave API support to come). I used dmatest client without problem in different configurations to test it. Full documentation for this controller can be found in the SAM9RL datasheet: http://www.atmel.com/dyn/products/product_card.asp?part_id=4243 Signed-off-by: Nicolas Ferre Acked-by: Maciej Sosnowski Signed-off-by: Dan Williams --- arch/arm/mach-at91/include/mach/at_hdmac.h | 26 + drivers/dma/Kconfig | 8 + drivers/dma/Makefile | 1 + drivers/dma/at_hdmac.c | 1009 ++++++++++++++++++++++++++++ drivers/dma/at_hdmac_regs.h | 386 +++++++++++ 5 files changed, 1430 insertions(+) create mode 100644 arch/arm/mach-at91/include/mach/at_hdmac.h create mode 100644 drivers/dma/at_hdmac.c create mode 100644 drivers/dma/at_hdmac_regs.h diff --git a/arch/arm/mach-at91/include/mach/at_hdmac.h b/arch/arm/mach-at91/include/mach/at_hdmac.h new file mode 100644 index 00000000000..21a5554f9cb --- /dev/null +++ b/arch/arm/mach-at91/include/mach/at_hdmac.h @@ -0,0 +1,26 @@ +/* + * Header file for the Atmel AHB DMA Controller driver + * + * Copyright (C) 2008 Atmel Corporation + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ +#ifndef AT_HDMAC_H +#define AT_HDMAC_H + +#include + +/** + * struct at_dma_platform_data - Controller configuration parameters + * @nr_channels: Number of channels supported by hardware (max 8) + * @cap_mask: dma_capability flags supported by the platform + */ +struct at_dma_platform_data { + unsigned int nr_channels; + dma_cap_mask_t cap_mask; +}; + +#endif /* AT_HDMAC_H */ diff --git a/drivers/dma/Kconfig b/drivers/dma/Kconfig index babf214a509..bc8fb41cd62 100644 --- a/drivers/dma/Kconfig +++ b/drivers/dma/Kconfig @@ -46,6 +46,14 @@ config DW_DMAC Support the Synopsys DesignWare AHB DMA controller. This can be integrated in chips such as the Atmel AT32ap7000. +config AT_HDMAC + tristate "Atmel AHB DMA support" + depends on ARCH_AT91SAM9RL + select DMA_ENGINE + help + Support the Atmel AHB DMA controller. This can be integrated in + chips such as the Atmel AT91SAM9RL. + config FSL_DMA tristate "Freescale Elo and Elo Plus DMA support" depends on FSL_SOC diff --git a/drivers/dma/Makefile b/drivers/dma/Makefile index 2e5dc96700d..d7bc5fd17d8 100644 --- a/drivers/dma/Makefile +++ b/drivers/dma/Makefile @@ -7,4 +7,5 @@ obj-$(CONFIG_INTEL_IOP_ADMA) += iop-adma.o obj-$(CONFIG_FSL_DMA) += fsldma.o obj-$(CONFIG_MV_XOR) += mv_xor.o obj-$(CONFIG_DW_DMAC) += dw_dmac.o +obj-$(CONFIG_AT_HDMAC) += at_hdmac.o obj-$(CONFIG_MX3_IPU) += ipu/ diff --git a/drivers/dma/at_hdmac.c b/drivers/dma/at_hdmac.c new file mode 100644 index 00000000000..64dbf0ce128 --- /dev/null +++ b/drivers/dma/at_hdmac.c @@ -0,0 +1,1009 @@ +/* + * Driver for the Atmel AHB DMA Controller (aka HDMA or DMAC on AT91 systems) + * + * Copyright (C) 2008 Atmel Corporation + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * + * This supports the Atmel AHB DMA Controller, + * + * The driver has currently been tested with the Atmel AT91SAM9RL + * and AT91SAM9G45 series. + */ + +#include +#include +#include +#include +#include +#include +#include + +#include "at_hdmac_regs.h" + +/* + * Glossary + * -------- + * + * at_hdmac : Name of the ATmel AHB DMA Controller + * at_dma_ / atdma : ATmel DMA controller entity related + * atc_ / atchan : ATmel DMA Channel entity related + */ + +#define ATC_DEFAULT_CFG (ATC_FIFOCFG_HALFFIFO) +#define ATC_DEFAULT_CTRLA (0) +#define ATC_DEFAULT_CTRLB (ATC_SIF(0) \ + |ATC_DIF(1)) + +/* + * Initial number of descriptors to allocate for each channel. This could + * be increased during dma usage. + */ +static unsigned int init_nr_desc_per_channel = 64; +module_param(init_nr_desc_per_channel, uint, 0644); +MODULE_PARM_DESC(init_nr_desc_per_channel, + "initial descriptors per channel (default: 64)"); + + +/* prototypes */ +static dma_cookie_t atc_tx_submit(struct dma_async_tx_descriptor *tx); + + +/*----------------------------------------------------------------------*/ + +static struct at_desc *atc_first_active(struct at_dma_chan *atchan) +{ + return list_first_entry(&atchan->active_list, + struct at_desc, desc_node); +} + +static struct at_desc *atc_first_queued(struct at_dma_chan *atchan) +{ + return list_first_entry(&atchan->queue, + struct at_desc, desc_node); +} + +/** + * atc_alloc_descriptor - allocate and return an initilized descriptor + * @chan: the channel to allocate descriptors for + * @gfp_flags: GFP allocation flags + * + * Note: The ack-bit is positioned in the descriptor flag at creation time + * to make initial allocation more convenient. This bit will be cleared + * and control will be given to client at usage time (during + * preparation functions). + */ +static struct at_desc *atc_alloc_descriptor(struct dma_chan *chan, + gfp_t gfp_flags) +{ + struct at_desc *desc = NULL; + struct at_dma *atdma = to_at_dma(chan->device); + dma_addr_t phys; + + desc = dma_pool_alloc(atdma->dma_desc_pool, gfp_flags, &phys); + if (desc) { + memset(desc, 0, sizeof(struct at_desc)); + dma_async_tx_descriptor_init(&desc->txd, chan); + /* txd.flags will be overwritten in prep functions */ + desc->txd.flags = DMA_CTRL_ACK; + desc->txd.tx_submit = atc_tx_submit; + desc->txd.phys = phys; + } + + return desc; +} + +/** + * atc_desc_get - get a unsused descriptor from free_list + * @atchan: channel we want a new descriptor for + */ +static struct at_desc *atc_desc_get(struct at_dma_chan *atchan) +{ + struct at_desc *desc, *_desc; + struct at_desc *ret = NULL; + unsigned int i = 0; + LIST_HEAD(tmp_list); + + spin_lock_bh(&atchan->lock); + list_for_each_entry_safe(desc, _desc, &atchan->free_list, desc_node) { + i++; + if (async_tx_test_ack(&desc->txd)) { + list_del(&desc->desc_node); + ret = desc; + break; + } + dev_dbg(chan2dev(&atchan->chan_common), + "desc %p not ACKed\n", desc); + } + spin_unlock_bh(&atchan->lock); + dev_vdbg(chan2dev(&atchan->chan_common), + "scanned %u descriptors on freelist\n", i); + + /* no more descriptor available in initial pool: create one more */ + if (!ret) { + ret = atc_alloc_descriptor(&atchan->chan_common, GFP_ATOMIC); + if (ret) { + spin_lock_bh(&atchan->lock); + atchan->descs_allocated++; + spin_unlock_bh(&atchan->lock); + } else { + dev_err(chan2dev(&atchan->chan_common), + "not enough descriptors available\n"); + } + } + + return ret; +} + +/** + * atc_desc_put - move a descriptor, including any children, to the free list + * @atchan: channel we work on + * @desc: descriptor, at the head of a chain, to move to free list + */ +static void atc_desc_put(struct at_dma_chan *atchan, struct at_desc *desc) +{ + if (desc) { + struct at_desc *child; + + spin_lock_bh(&atchan->lock); + list_for_each_entry(child, &desc->txd.tx_list, desc_node) + dev_vdbg(chan2dev(&atchan->chan_common), + "moving child desc %p to freelist\n", + child); + list_splice_init(&desc->txd.tx_list, &atchan->free_list); + dev_vdbg(chan2dev(&atchan->chan_common), + "moving desc %p to freelist\n", desc); + list_add(&desc->desc_node, &atchan->free_list); + spin_unlock_bh(&atchan->lock); + } +} + +/** + * atc_assign_cookie - compute and assign new cookie + * @atchan: channel we work on + * @desc: descriptor to asign cookie for + * + * Called with atchan->lock held and bh disabled + */ +static dma_cookie_t +atc_assign_cookie(struct at_dma_chan *atchan, struct at_desc *desc) +{ + dma_cookie_t cookie = atchan->chan_common.cookie; + + if (++cookie < 0) + cookie = 1; + + atchan->chan_common.cookie = cookie; + desc->txd.cookie = cookie; + + return cookie; +} + +/** + * atc_dostart - starts the DMA engine for real + * @atchan: the channel we want to start + * @first: first descriptor in the list we want to begin with + * + * Called with atchan->lock held and bh disabled + */ +static void atc_dostart(struct at_dma_chan *atchan, struct at_desc *first) +{ + struct at_dma *atdma = to_at_dma(atchan->chan_common.device); + + /* ASSERT: channel is idle */ + if (atc_chan_is_enabled(atchan)) { + dev_err(chan2dev(&atchan->chan_common), + "BUG: Attempted to start non-idle channel\n"); + dev_err(chan2dev(&atchan->chan_common), + " channel: s0x%x d0x%x ctrl0x%x:0x%x l0x%x\n", + channel_readl(atchan, SADDR), + channel_readl(atchan, DADDR), + channel_readl(atchan, CTRLA), + channel_readl(atchan, CTRLB), + channel_readl(atchan, DSCR)); + + /* The tasklet will hopefully advance the queue... */ + return; + } + + vdbg_dump_regs(atchan); + + /* clear any pending interrupt */ + while (dma_readl(atdma, EBCISR)) + cpu_relax(); + + channel_writel(atchan, SADDR, 0); + channel_writel(atchan, DADDR, 0); + channel_writel(atchan, CTRLA, 0); + channel_writel(atchan, CTRLB, 0); + channel_writel(atchan, DSCR, first->txd.phys); + dma_writel(atdma, CHER, atchan->mask); + + vdbg_dump_regs(atchan); +} + +/** + * atc_chain_complete - finish work for one transaction chain + * @atchan: channel we work on + * @desc: descriptor at the head of the chain we want do complete + * + * Called with atchan->lock held and bh disabled */ +static void +atc_chain_complete(struct at_dma_chan *atchan, struct at_desc *desc) +{ + dma_async_tx_callback callback; + void *param; + struct dma_async_tx_descriptor *txd = &desc->txd; + + dev_vdbg(chan2dev(&atchan->chan_common), + "descriptor %u complete\n", txd->cookie); + + atchan->completed_cookie = txd->cookie; + callback = txd->callback; + param = txd->callback_param; + + /* move children to free_list */ + list_splice_init(&txd->tx_list, &atchan->free_list); + /* move myself to free_list */ + list_move(&desc->desc_node, &atchan->free_list); + + /* unmap dma addresses */ + if (!(txd->flags & DMA_COMPL_SKIP_DEST_UNMAP)) { + if (txd->flags & DMA_COMPL_DEST_UNMAP_SINGLE) + dma_unmap_single(chan2parent(&atchan->chan_common), + desc->lli.daddr, + desc->len, DMA_FROM_DEVICE); + else + dma_unmap_page(chan2parent(&atchan->chan_common), + desc->lli.daddr, + desc->len, DMA_FROM_DEVICE); + } + if (!(txd->flags & DMA_COMPL_SKIP_SRC_UNMAP)) { + if (txd->flags & DMA_COMPL_SRC_UNMAP_SINGLE) + dma_unmap_single(chan2parent(&atchan->chan_common), + desc->lli.saddr, + desc->len, DMA_TO_DEVICE); + else + dma_unmap_page(chan2parent(&atchan->chan_common), + desc->lli.saddr, + desc->len, DMA_TO_DEVICE); + } + + /* + * The API requires that no submissions are done from a + * callback, so we don't need to drop the lock here + */ + if (callback) + callback(param); + + dma_run_dependencies(txd); +} + +/** + * atc_complete_all - finish work for all transactions + * @atchan: channel to complete transactions for + * + * Eventually submit queued descriptors if any + * + * Assume channel is idle while calling this function + * Called with atchan->lock held and bh disabled + */ +static void atc_complete_all(struct at_dma_chan *atchan) +{ + struct at_desc *desc, *_desc; + LIST_HEAD(list); + + dev_vdbg(chan2dev(&atchan->chan_common), "complete all\n"); + + BUG_ON(atc_chan_is_enabled(atchan)); + + /* + * Submit queued descriptors ASAP, i.e. before we go through + * the completed ones. + */ + if (!list_empty(&atchan->queue)) + atc_dostart(atchan, atc_first_queued(atchan)); + /* empty active_list now it is completed */ + list_splice_init(&atchan->active_list, &list); + /* empty queue list by moving descriptors (if any) to active_list */ + list_splice_init(&atchan->queue, &atchan->active_list); + + list_for_each_entry_safe(desc, _desc, &list, desc_node) + atc_chain_complete(atchan, desc); +} + +/** + * atc_cleanup_descriptors - cleanup up finished descriptors in active_list + * @atchan: channel to be cleaned up + * + * Called with atchan->lock held and bh disabled + */ +static void atc_cleanup_descriptors(struct at_dma_chan *atchan) +{ + struct at_desc *desc, *_desc; + struct at_desc *child; + + dev_vdbg(chan2dev(&atchan->chan_common), "cleanup descriptors\n"); + + list_for_each_entry_safe(desc, _desc, &atchan->active_list, desc_node) { + if (!(desc->lli.ctrla & ATC_DONE)) + /* This one is currently in progress */ + return; + + list_for_each_entry(child, &desc->txd.tx_list, desc_node) + if (!(child->lli.ctrla & ATC_DONE)) + /* Currently in progress */ + return; + + /* + * No descriptors so far seem to be in progress, i.e. + * this chain must be done. + */ + atc_chain_complete(atchan, desc); + } +} + +/** + * atc_advance_work - at the end of a transaction, move forward + * @atchan: channel where the transaction ended + * + * Called with atchan->lock held and bh disabled + */ +static void atc_advance_work(struct at_dma_chan *atchan) +{ + dev_vdbg(chan2dev(&atchan->chan_common), "advance_work\n"); + + if (list_empty(&atchan->active_list) || + list_is_singular(&atchan->active_list)) { + atc_complete_all(atchan); + } else { + atc_chain_complete(atchan, atc_first_active(atchan)); + /* advance work */ + atc_dostart(atchan, atc_first_active(atchan)); + } +} + + +/** + * atc_handle_error - handle errors reported by DMA controller + * @atchan: channel where error occurs + * + * Called with atchan->lock held and bh disabled + */ +static void atc_handle_error(struct at_dma_chan *atchan) +{ + struct at_desc *bad_desc; + struct at_desc *child; + + /* + * The descriptor currently at the head of the active list is + * broked. Since we don't have any way to report errors, we'll + * just have to scream loudly and try to carry on. + */ + bad_desc = atc_first_active(atchan); + list_del_init(&bad_desc->desc_node); + + /* As we are stopped, take advantage to push queued descriptors + * in active_list */ + list_splice_init(&atchan->queue, atchan->active_list.prev); + + /* Try to restart the controller */ + if (!list_empty(&atchan->active_list)) + atc_dostart(atchan, atc_first_active(atchan)); + + /* + * KERN_CRITICAL may seem harsh, but since this only happens + * when someone submits a bad physical address in a + * descriptor, we should consider ourselves lucky that the + * controller flagged an error instead of scribbling over + * random memory locations. + */ + dev_crit(chan2dev(&atchan->chan_common), + "Bad descriptor submitted for DMA!\n"); + dev_crit(chan2dev(&atchan->chan_common), + " cookie: %d\n", bad_desc->txd.cookie); + atc_dump_lli(atchan, &bad_desc->lli); + list_for_each_entry(child, &bad_desc->txd.tx_list, desc_node) + atc_dump_lli(atchan, &child->lli); + + /* Pretend the descriptor completed successfully */ + atc_chain_complete(atchan, bad_desc); +} + + +/*-- IRQ & Tasklet ---------------------------------------------------*/ + +static void atc_tasklet(unsigned long data) +{ + struct at_dma_chan *atchan = (struct at_dma_chan *)data; + + /* Channel cannot be enabled here */ + if (atc_chan_is_enabled(atchan)) { + dev_err(chan2dev(&atchan->chan_common), + "BUG: channel enabled in tasklet\n"); + return; + } + + spin_lock(&atchan->lock); + if (test_and_clear_bit(0, &atchan->error_status)) + atc_handle_error(atchan); + else + atc_advance_work(atchan); + + spin_unlock(&atchan->lock); +} + +static irqreturn_t at_dma_interrupt(int irq, void *dev_id) +{ + struct at_dma *atdma = (struct at_dma *)dev_id; + struct at_dma_chan *atchan; + int i; + u32 status, pending, imr; + int ret = IRQ_NONE; + + do { + imr = dma_readl(atdma, EBCIMR); + status = dma_readl(atdma, EBCISR); + pending = status & imr; + + if (!pending) + break; + + dev_vdbg(atdma->dma_common.dev, + "interrupt: status = 0x%08x, 0x%08x, 0x%08x\n", + status, imr, pending); + + for (i = 0; i < atdma->dma_common.chancnt; i++) { + atchan = &atdma->chan[i]; + if (pending & (AT_DMA_CBTC(i) | AT_DMA_ERR(i))) { + if (pending & AT_DMA_ERR(i)) { + /* Disable channel on AHB error */ + dma_writel(atdma, CHDR, atchan->mask); + /* Give information to tasklet */ + set_bit(0, &atchan->error_status); + } + tasklet_schedule(&atchan->tasklet); + ret = IRQ_HANDLED; + } + } + + } while (pending); + + return ret; +} + + +/*-- DMA Engine API --------------------------------------------------*/ + +/** + * atc_tx_submit - set the prepared descriptor(s) to be executed by the engine + * @desc: descriptor at the head of the transaction chain + * + * Queue chain if DMA engine is working already + * + * Cookie increment and adding to active_list or queue must be atomic + */ +static dma_cookie_t atc_tx_submit(struct dma_async_tx_descriptor *tx) +{ + struct at_desc *desc = txd_to_at_desc(tx); + struct at_dma_chan *atchan = to_at_dma_chan(tx->chan); + dma_cookie_t cookie; + + spin_lock_bh(&atchan->lock); + cookie = atc_assign_cookie(atchan, desc); + + if (list_empty(&atchan->active_list)) { + dev_vdbg(chan2dev(tx->chan), "tx_submit: started %u\n", + desc->txd.cookie); + atc_dostart(atchan, desc); + list_add_tail(&desc->desc_node, &atchan->active_list); + } else { + dev_vdbg(chan2dev(tx->chan), "tx_submit: queued %u\n", + desc->txd.cookie); + list_add_tail(&desc->desc_node, &atchan->queue); + } + + spin_unlock_bh(&atchan->lock); + + return cookie; +} + +/** + * atc_prep_dma_memcpy - prepare a memcpy operation + * @chan: the channel to prepare operation on + * @dest: operation virtual destination address + * @src: operation virtual source address + * @len: operation length + * @flags: tx descriptor status flags + */ +static struct dma_async_tx_descriptor * +atc_prep_dma_memcpy(struct dma_chan *chan, dma_addr_t dest, dma_addr_t src, + size_t len, unsigned long flags) +{ + struct at_dma_chan *atchan = to_at_dma_chan(chan); + struct at_desc *desc = NULL; + struct at_desc *first = NULL; + struct at_desc *prev = NULL; + size_t xfer_count; + size_t offset; + unsigned int src_width; + unsigned int dst_width; + u32 ctrla; + u32 ctrlb; + + dev_vdbg(chan2dev(chan), "prep_dma_memcpy: d0x%x s0x%x l0x%zx f0x%lx\n", + dest, src, len, flags); + + if (unlikely(!len)) { + dev_dbg(chan2dev(chan), "prep_dma_memcpy: length is zero!\n"); + return NULL; + } + + ctrla = ATC_DEFAULT_CTRLA; + ctrlb = ATC_DEFAULT_CTRLB + | ATC_SRC_ADDR_MODE_INCR + | ATC_DST_ADDR_MODE_INCR + | ATC_FC_MEM2MEM; + + /* + * We can be a lot more clever here, but this should take care + * of the most common optimization. + */ + if (!((src | dest | len) & 3)) { + ctrla |= ATC_SRC_WIDTH_WORD | ATC_DST_WIDTH_WORD; + src_width = dst_width = 2; + } else if (!((src | dest | len) & 1)) { + ctrla |= ATC_SRC_WIDTH_HALFWORD | ATC_DST_WIDTH_HALFWORD; + src_width = dst_width = 1; + } else { + ctrla |= ATC_SRC_WIDTH_BYTE | ATC_DST_WIDTH_BYTE; + src_width = dst_width = 0; + } + + for (offset = 0; offset < len; offset += xfer_count << src_width) { + xfer_count = min_t(size_t, (len - offset) >> src_width, + ATC_BTSIZE_MAX); + + desc = atc_desc_get(atchan); + if (!desc) + goto err_desc_get; + + desc->lli.saddr = src + offset; + desc->lli.daddr = dest + offset; + desc->lli.ctrla = ctrla | xfer_count; + desc->lli.ctrlb = ctrlb; + + desc->txd.cookie = 0; + async_tx_ack(&desc->txd); + + if (!first) { + first = desc; + } else { + /* inform the HW lli about chaining */ + prev->lli.dscr = desc->txd.phys; + /* insert the link descriptor to the LD ring */ + list_add_tail(&desc->desc_node, + &first->txd.tx_list); + } + prev = desc; + } + + /* First descriptor of the chain embedds additional information */ + first->txd.cookie = -EBUSY; + first->len = len; + + /* set end-of-link to the last link descriptor of list*/ + set_desc_eol(desc); + + desc->txd.flags = flags; /* client is in control of this ack */ + + return &first->txd; + +err_desc_get: + atc_desc_put(atchan, first); + return NULL; +} + +/** + * atc_is_tx_complete - poll for transaction completion + * @chan: DMA channel + * @cookie: transaction identifier to check status of + * @done: if not %NULL, updated with last completed transaction + * @used: if not %NULL, updated with last used transaction + * + * If @done and @used are passed in, upon return they reflect the driver + * internal state and can be used with dma_async_is_complete() to check + * the status of multiple cookies without re-checking hardware state. + */ +static enum dma_status +atc_is_tx_complete(struct dma_chan *chan, + dma_cookie_t cookie, + dma_cookie_t *done, dma_cookie_t *used) +{ + struct at_dma_chan *atchan = to_at_dma_chan(chan); + dma_cookie_t last_used; + dma_cookie_t last_complete; + enum dma_status ret; + + dev_vdbg(chan2dev(chan), "is_tx_complete: %d (d%d, u%d)\n", + cookie, done ? *done : 0, used ? *used : 0); + + spin_lock_bh(atchan->lock); + + last_complete = atchan->completed_cookie; + last_used = chan->cookie; + + ret = dma_async_is_complete(cookie, last_complete, last_used); + if (ret != DMA_SUCCESS) { + atc_cleanup_descriptors(atchan); + + last_complete = atchan->completed_cookie; + last_used = chan->cookie; + + ret = dma_async_is_complete(cookie, last_complete, last_used); + } + + spin_unlock_bh(atchan->lock); + + if (done) + *done = last_complete; + if (used) + *used = last_used; + + return ret; +} + +/** + * atc_issue_pending - try to finish work + * @chan: target DMA channel + */ +static void atc_issue_pending(struct dma_chan *chan) +{ + struct at_dma_chan *atchan = to_at_dma_chan(chan); + + dev_vdbg(chan2dev(chan), "issue_pending\n"); + + if (!atc_chan_is_enabled(atchan)) { + spin_lock_bh(&atchan->lock); + atc_advance_work(atchan); + spin_unlock_bh(&atchan->lock); + } +} + +/** + * atc_alloc_chan_resources - allocate resources for DMA channel + * @chan: allocate descriptor resources for this channel + * @client: current client requesting the channel be ready for requests + * + * return - the number of allocated descriptors + */ +static int atc_alloc_chan_resources(struct dma_chan *chan) +{ + struct at_dma_chan *atchan = to_at_dma_chan(chan); + struct at_dma *atdma = to_at_dma(chan->device); + struct at_desc *desc; + int i; + LIST_HEAD(tmp_list); + + dev_vdbg(chan2dev(chan), "alloc_chan_resources\n"); + + /* ASSERT: channel is idle */ + if (atc_chan_is_enabled(atchan)) { + dev_dbg(chan2dev(chan), "DMA channel not idle ?\n"); + return -EIO; + } + + /* have we already been set up? */ + if (!list_empty(&atchan->free_list)) + return atchan->descs_allocated; + + /* Allocate initial pool of descriptors */ + for (i = 0; i < init_nr_desc_per_channel; i++) { + desc = atc_alloc_descriptor(chan, GFP_KERNEL); + if (!desc) { + dev_err(atdma->dma_common.dev, + "Only %d initial descriptors\n", i); + break; + } + list_add_tail(&desc->desc_node, &tmp_list); + } + + spin_lock_bh(&atchan->lock); + atchan->descs_allocated = i; + list_splice(&tmp_list, &atchan->free_list); + atchan->completed_cookie = chan->cookie = 1; + spin_unlock_bh(&atchan->lock); + + /* channel parameters */ + channel_writel(atchan, CFG, ATC_DEFAULT_CFG); + + dev_dbg(chan2dev(chan), + "alloc_chan_resources: allocated %d descriptors\n", + atchan->descs_allocated); + + return atchan->descs_allocated; +} + +/** + * atc_free_chan_resources - free all channel resources + * @chan: DMA channel + */ +static void atc_free_chan_resources(struct dma_chan *chan) +{ + struct at_dma_chan *atchan = to_at_dma_chan(chan); + struct at_dma *atdma = to_at_dma(chan->device); + struct at_desc *desc, *_desc; + LIST_HEAD(list); + + dev_dbg(chan2dev(chan), "free_chan_resources: (descs allocated=%u)\n", + atchan->descs_allocated); + + /* ASSERT: channel is idle */ + BUG_ON(!list_empty(&atchan->active_list)); + BUG_ON(!list_empty(&atchan->queue)); + BUG_ON(atc_chan_is_enabled(atchan)); + + list_for_each_entry_safe(desc, _desc, &atchan->free_list, desc_node) { + dev_vdbg(chan2dev(chan), " freeing descriptor %p\n", desc); + list_del(&desc->desc_node); + /* free link descriptor */ + dma_pool_free(atdma->dma_desc_pool, desc, desc->txd.phys); + } + list_splice_init(&atchan->free_list, &list); + atchan->descs_allocated = 0; + + dev_vdbg(chan2dev(chan), "free_chan_resources: done\n"); +} + + +/*-- Module Management -----------------------------------------------*/ + +/** + * at_dma_off - disable DMA controller + * @atdma: the Atmel HDAMC device + */ +static void at_dma_off(struct at_dma *atdma) +{ + dma_writel(atdma, EN, 0); + + /* disable all interrupts */ + dma_writel(atdma, EBCIDR, -1L); + + /* confirm that all channels are disabled */ + while (dma_readl(atdma, CHSR) & atdma->all_chan_mask) + cpu_relax(); +} + +static int __init at_dma_probe(struct platform_device *pdev) +{ + struct at_dma_platform_data *pdata; + struct resource *io; + struct at_dma *atdma; + size_t size; + int irq; + int err; + int i; + + /* get DMA Controller parameters from platform */ + pdata = pdev->dev.platform_data; + if (!pdata || pdata->nr_channels > AT_DMA_MAX_NR_CHANNELS) + return -EINVAL; + + io = platform_get_resource(pdev, IORESOURCE_MEM, 0); + if (!io) + return -EINVAL; + + irq = platform_get_irq(pdev, 0); + if (irq < 0) + return irq; + + size = sizeof(struct at_dma); + size += pdata->nr_channels * sizeof(struct at_dma_chan); + atdma = kzalloc(size, GFP_KERNEL); + if (!atdma) + return -ENOMEM; + + /* discover transaction capabilites from the platform data */ + atdma->dma_common.cap_mask = pdata->cap_mask; + atdma->all_chan_mask = (1 << pdata->nr_channels) - 1; + + size = io->end - io->start + 1; + if (!request_mem_region(io->start, size, pdev->dev.driver->name)) { + err = -EBUSY; + goto err_kfree; + } + + atdma->regs = ioremap(io->start, size); + if (!atdma->regs) { + err = -ENOMEM; + goto err_release_r; + } + + atdma->clk = clk_get(&pdev->dev, "dma_clk"); + if (IS_ERR(atdma->clk)) { + err = PTR_ERR(atdma->clk); + goto err_clk; + } + clk_enable(atdma->clk); + + /* force dma off, just in case */ + at_dma_off(atdma); + + err = request_irq(irq, at_dma_interrupt, 0, "at_hdmac", atdma); + if (err) + goto err_irq; + + platform_set_drvdata(pdev, atdma); + + /* create a pool of consistent memory blocks for hardware descriptors */ + atdma->dma_desc_pool = dma_pool_create("at_hdmac_desc_pool", + &pdev->dev, sizeof(struct at_desc), + 4 /* word alignment */, 0); + if (!atdma->dma_desc_pool) { + dev_err(&pdev->dev, "No memory for descriptors dma pool\n"); + err = -ENOMEM; + goto err_pool_create; + } + + /* clear any pending interrupt */ + while (dma_readl(atdma, EBCISR)) + cpu_relax(); + + /* initialize channels related values */ + INIT_LIST_HEAD(&atdma->dma_common.channels); + for (i = 0; i < pdata->nr_channels; i++, atdma->dma_common.chancnt++) { + struct at_dma_chan *atchan = &atdma->chan[i]; + + atchan->chan_common.device = &atdma->dma_common; + atchan->chan_common.cookie = atchan->completed_cookie = 1; + atchan->chan_common.chan_id = i; + list_add_tail(&atchan->chan_common.device_node, + &atdma->dma_common.channels); + + atchan->ch_regs = atdma->regs + ch_regs(i); + spin_lock_init(&atchan->lock); + atchan->mask = 1 << i; + + INIT_LIST_HEAD(&atchan->active_list); + INIT_LIST_HEAD(&atchan->queue); + INIT_LIST_HEAD(&atchan->free_list); + + tasklet_init(&atchan->tasklet, atc_tasklet, + (unsigned long)atchan); + atc_enable_irq(atchan); + } + + /* set base routines */ + atdma->dma_common.device_alloc_chan_resources = atc_alloc_chan_resources; + atdma->dma_common.device_free_chan_resources = atc_free_chan_resources; + atdma->dma_common.device_is_tx_complete = atc_is_tx_complete; + atdma->dma_common.device_issue_pending = atc_issue_pending; + atdma->dma_common.dev = &pdev->dev; + + /* set prep routines based on capability */ + if (dma_has_cap(DMA_MEMCPY, atdma->dma_common.cap_mask)) + atdma->dma_common.device_prep_dma_memcpy = atc_prep_dma_memcpy; + + dma_writel(atdma, EN, AT_DMA_ENABLE); + + dev_info(&pdev->dev, "Atmel AHB DMA Controller ( %s%s), %d channels\n", + dma_has_cap(DMA_MEMCPY, atdma->dma_common.cap_mask) ? "cpy " : "", + dma_has_cap(DMA_SLAVE, atdma->dma_common.cap_mask) ? "slave " : "", + atdma->dma_common.chancnt); + + dma_async_device_register(&atdma->dma_common); + + return 0; + +err_pool_create: + platform_set_drvdata(pdev, NULL); + free_irq(platform_get_irq(pdev, 0), atdma); +err_irq: + clk_disable(atdma->clk); + clk_put(atdma->clk); +err_clk: + iounmap(atdma->regs); + atdma->regs = NULL; +err_release_r: + release_mem_region(io->start, size); +err_kfree: + kfree(atdma); + return err; +} + +static int __exit at_dma_remove(struct platform_device *pdev) +{ + struct at_dma *atdma = platform_get_drvdata(pdev); + struct dma_chan *chan, *_chan; + struct resource *io; + + at_dma_off(atdma); + dma_async_device_unregister(&atdma->dma_common); + + dma_pool_destroy(atdma->dma_desc_pool); + platform_set_drvdata(pdev, NULL); + free_irq(platform_get_irq(pdev, 0), atdma); + + list_for_each_entry_safe(chan, _chan, &atdma->dma_common.channels, + device_node) { + struct at_dma_chan *atchan = to_at_dma_chan(chan); + + /* Disable interrupts */ + atc_disable_irq(atchan); + tasklet_disable(&atchan->tasklet); + + tasklet_kill(&atchan->tasklet); + list_del(&chan->device_node); + } + + clk_disable(atdma->clk); + clk_put(atdma->clk); + + iounmap(atdma->regs); + atdma->regs = NULL; + + io = platform_get_resource(pdev, IORESOURCE_MEM, 0); + release_mem_region(io->start, io->end - io->start + 1); + + kfree(atdma); + + return 0; +} + +static void at_dma_shutdown(struct platform_device *pdev) +{ + struct at_dma *atdma = platform_get_drvdata(pdev); + + at_dma_off(platform_get_drvdata(pdev)); + clk_disable(atdma->clk); +} + +static int at_dma_suspend_late(struct platform_device *pdev, pm_message_t mesg) +{ + struct at_dma *atdma = platform_get_drvdata(pdev); + + at_dma_off(platform_get_drvdata(pdev)); + clk_disable(atdma->clk); + return 0; +} + +static int at_dma_resume_early(struct platform_device *pdev) +{ + struct at_dma *atdma = platform_get_drvdata(pdev); + + clk_enable(atdma->clk); + dma_writel(atdma, EN, AT_DMA_ENABLE); + return 0; + +} + +static struct platform_driver at_dma_driver = { + .remove = __exit_p(at_dma_remove), + .shutdown = at_dma_shutdown, + .suspend_late = at_dma_suspend_late, + .resume_early = at_dma_resume_early, + .driver = { + .name = "at_hdmac", + }, +}; + +static int __init at_dma_init(void) +{ + return platform_driver_probe(&at_dma_driver, at_dma_probe); +} +module_init(at_dma_init); + +static void __exit at_dma_exit(void) +{ + platform_driver_unregister(&at_dma_driver); +} +module_exit(at_dma_exit); + +MODULE_DESCRIPTION("Atmel AHB DMA Controller driver"); +MODULE_AUTHOR("Nicolas Ferre "); +MODULE_LICENSE("GPL"); +MODULE_ALIAS("platform:at_hdmac"); diff --git a/drivers/dma/at_hdmac_regs.h b/drivers/dma/at_hdmac_regs.h new file mode 100644 index 00000000000..ad2d4f402bf --- /dev/null +++ b/drivers/dma/at_hdmac_regs.h @@ -0,0 +1,386 @@ +/* + * Header file for the Atmel AHB DMA Controller driver + * + * Copyright (C) 2008 Atmel Corporation + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ +#ifndef AT_HDMAC_REGS_H +#define AT_HDMAC_REGS_H + +#include + +#define AT_DMA_MAX_NR_CHANNELS 8 + + +#define AT_DMA_GCFG 0x00 /* Global Configuration Register */ +#define AT_DMA_IF_BIGEND(i) (0x1 << (i)) /* AHB-Lite Interface i in Big-endian mode */ +#define AT_DMA_ARB_CFG (0x1 << 4) /* Arbiter mode. */ +#define AT_DMA_ARB_CFG_FIXED (0x0 << 4) +#define AT_DMA_ARB_CFG_ROUND_ROBIN (0x1 << 4) + +#define AT_DMA_EN 0x04 /* Controller Enable Register */ +#define AT_DMA_ENABLE (0x1 << 0) + +#define AT_DMA_SREQ 0x08 /* Software Single Request Register */ +#define AT_DMA_SSREQ(x) (0x1 << ((x) << 1)) /* Request a source single transfer on channel x */ +#define AT_DMA_DSREQ(x) (0x1 << (1 + ((x) << 1))) /* Request a destination single transfer on channel x */ + +#define AT_DMA_CREQ 0x0C /* Software Chunk Transfer Request Register */ +#define AT_DMA_SCREQ(x) (0x1 << ((x) << 1)) /* Request a source chunk transfer on channel x */ +#define AT_DMA_DCREQ(x) (0x1 << (1 + ((x) << 1))) /* Request a destination chunk transfer on channel x */ + +#define AT_DMA_LAST 0x10 /* Software Last Transfer Flag Register */ +#define AT_DMA_SLAST(x) (0x1 << ((x) << 1)) /* This src rq is last tx of buffer on channel x */ +#define AT_DMA_DLAST(x) (0x1 << (1 + ((x) << 1))) /* This dst rq is last tx of buffer on channel x */ + +#define AT_DMA_SYNC 0x14 /* Request Synchronization Register */ +#define AT_DMA_SYR(h) (0x1 << (h)) /* Synchronize handshake line h */ + +/* Error, Chained Buffer transfer completed and Buffer transfer completed Interrupt registers */ +#define AT_DMA_EBCIER 0x18 /* Enable register */ +#define AT_DMA_EBCIDR 0x1C /* Disable register */ +#define AT_DMA_EBCIMR 0x20 /* Mask Register */ +#define AT_DMA_EBCISR 0x24 /* Status Register */ +#define AT_DMA_CBTC_OFFSET 8 +#define AT_DMA_ERR_OFFSET 16 +#define AT_DMA_BTC(x) (0x1 << (x)) +#define AT_DMA_CBTC(x) (0x1 << (AT_DMA_CBTC_OFFSET + (x))) +#define AT_DMA_ERR(x) (0x1 << (AT_DMA_ERR_OFFSET + (x))) + +#define AT_DMA_CHER 0x28 /* Channel Handler Enable Register */ +#define AT_DMA_ENA(x) (0x1 << (x)) +#define AT_DMA_SUSP(x) (0x1 << ( 8 + (x))) +#define AT_DMA_KEEP(x) (0x1 << (24 + (x))) + +#define AT_DMA_CHDR 0x2C /* Channel Handler Disable Register */ +#define AT_DMA_DIS(x) (0x1 << (x)) +#define AT_DMA_RES(x) (0x1 << ( 8 + (x))) + +#define AT_DMA_CHSR 0x30 /* Channel Handler Status Register */ +#define AT_DMA_EMPT(x) (0x1 << (16 + (x))) +#define AT_DMA_STAL(x) (0x1 << (24 + (x))) + + +#define AT_DMA_CH_REGS_BASE 0x3C /* Channel registers base address */ +#define ch_regs(x) (AT_DMA_CH_REGS_BASE + (x) * 0x28) /* Channel x base addr */ + +/* Hardware register offset for each channel */ +#define ATC_SADDR_OFFSET 0x00 /* Source Address Register */ +#define ATC_DADDR_OFFSET 0x04 /* Destination Address Register */ +#define ATC_DSCR_OFFSET 0x08 /* Descriptor Address Register */ +#define ATC_CTRLA_OFFSET 0x0C /* Control A Register */ +#define ATC_CTRLB_OFFSET 0x10 /* Control B Register */ +#define ATC_CFG_OFFSET 0x14 /* Configuration Register */ +#define ATC_SPIP_OFFSET 0x18 /* Src PIP Configuration Register */ +#define ATC_DPIP_OFFSET 0x1C /* Dst PIP Configuration Register */ + + +/* Bitfield definitions */ + +/* Bitfields in DSCR */ +#define ATC_DSCR_IF(i) (0x3 & (i)) /* Dsc feched via AHB-Lite Interface i */ + +/* Bitfields in CTRLA */ +#define ATC_BTSIZE_MAX 0xFFFFUL /* Maximum Buffer Transfer Size */ +#define ATC_BTSIZE(x) (ATC_BTSIZE_MAX & (x)) /* Buffer Transfer Size */ +#define ATC_SCSIZE_MASK (0x7 << 16) /* Source Chunk Transfer Size */ +#define ATC_SCSIZE_1 (0x0 << 16) +#define ATC_SCSIZE_4 (0x1 << 16) +#define ATC_SCSIZE_8 (0x2 << 16) +#define ATC_SCSIZE_16 (0x3 << 16) +#define ATC_SCSIZE_32 (0x4 << 16) +#define ATC_SCSIZE_64 (0x5 << 16) +#define ATC_SCSIZE_128 (0x6 << 16) +#define ATC_SCSIZE_256 (0x7 << 16) +#define ATC_DCSIZE_MASK (0x7 << 20) /* Destination Chunk Transfer Size */ +#define ATC_DCSIZE_1 (0x0 << 20) +#define ATC_DCSIZE_4 (0x1 << 20) +#define ATC_DCSIZE_8 (0x2 << 20) +#define ATC_DCSIZE_16 (0x3 << 20) +#define ATC_DCSIZE_32 (0x4 << 20) +#define ATC_DCSIZE_64 (0x5 << 20) +#define ATC_DCSIZE_128 (0x6 << 20) +#define ATC_DCSIZE_256 (0x7 << 20) +#define ATC_SRC_WIDTH_MASK (0x3 << 24) /* Source Single Transfer Size */ +#define ATC_SRC_WIDTH_BYTE (0x0 << 24) +#define ATC_SRC_WIDTH_HALFWORD (0x1 << 24) +#define ATC_SRC_WIDTH_WORD (0x2 << 24) +#define ATC_DST_WIDTH_MASK (0x3 << 28) /* Destination Single Transfer Size */ +#define ATC_DST_WIDTH_BYTE (0x0 << 28) +#define ATC_DST_WIDTH_HALFWORD (0x1 << 28) +#define ATC_DST_WIDTH_WORD (0x2 << 28) +#define ATC_DONE (0x1 << 31) /* Tx Done (only written back in descriptor) */ + +/* Bitfields in CTRLB */ +#define ATC_SIF(i) (0x3 & (i)) /* Src tx done via AHB-Lite Interface i */ +#define ATC_DIF(i) ((0x3 & (i)) << 4) /* Dst tx done via AHB-Lite Interface i */ +#define ATC_SRC_PIP (0x1 << 8) /* Source Picture-in-Picture enabled */ +#define ATC_DST_PIP (0x1 << 12) /* Destination Picture-in-Picture enabled */ +#define ATC_SRC_DSCR_DIS (0x1 << 16) /* Src Descriptor fetch disable */ +#define ATC_DST_DSCR_DIS (0x1 << 20) /* Dst Descriptor fetch disable */ +#define ATC_FC_MASK (0x7 << 21) /* Choose Flow Controller */ +#define ATC_FC_MEM2MEM (0x0 << 21) /* Mem-to-Mem (DMA) */ +#define ATC_FC_MEM2PER (0x1 << 21) /* Mem-to-Periph (DMA) */ +#define ATC_FC_PER2MEM (0x2 << 21) /* Periph-to-Mem (DMA) */ +#define ATC_FC_PER2PER (0x3 << 21) /* Periph-to-Periph (DMA) */ +#define ATC_FC_PER2MEM_PER (0x4 << 21) /* Periph-to-Mem (Peripheral) */ +#define ATC_FC_MEM2PER_PER (0x5 << 21) /* Mem-to-Periph (Peripheral) */ +#define ATC_FC_PER2PER_PER (0x6 << 21) /* Periph-to-Periph (Src Peripheral) */ +#define ATC_SRC_ADDR_MODE_MASK (0x3 << 24) +#define ATC_SRC_ADDR_MODE_INCR (0x0 << 24) /* Incrementing Mode */ +#define ATC_SRC_ADDR_MODE_DECR (0x1 << 24) /* Decrementing Mode */ +#define ATC_SRC_ADDR_MODE_FIXED (0x2 << 24) /* Fixed Mode */ +#define ATC_DST_ADDR_MODE_MASK (0x3 << 28) +#define ATC_DST_ADDR_MODE_INCR (0x0 << 28) /* Incrementing Mode */ +#define ATC_DST_ADDR_MODE_DECR (0x1 << 28) /* Decrementing Mode */ +#define ATC_DST_ADDR_MODE_FIXED (0x2 << 28) /* Fixed Mode */ +#define ATC_IEN (0x1 << 30) /* BTC interrupt enable (active low) */ +#define ATC_AUTO (0x1 << 31) /* Auto multiple buffer tx enable */ + +/* Bitfields in CFG */ +#define ATC_SRC_PER(h) (0xFU & (h)) /* Channel src rq associated with periph handshaking ifc h */ +#define ATC_DST_PER(h) ((0xFU & (h)) << 4) /* Channel dst rq associated with periph handshaking ifc h */ +#define ATC_SRC_REP (0x1 << 8) /* Source Replay Mod */ +#define ATC_SRC_H2SEL (0x1 << 9) /* Source Handshaking Mod */ +#define ATC_SRC_H2SEL_SW (0x0 << 9) +#define ATC_SRC_H2SEL_HW (0x1 << 9) +#define ATC_DST_REP (0x1 << 12) /* Destination Replay Mod */ +#define ATC_DST_H2SEL (0x1 << 13) /* Destination Handshaking Mod */ +#define ATC_DST_H2SEL_SW (0x0 << 13) +#define ATC_DST_H2SEL_HW (0x1 << 13) +#define ATC_SOD (0x1 << 16) /* Stop On Done */ +#define ATC_LOCK_IF (0x1 << 20) /* Interface Lock */ +#define ATC_LOCK_B (0x1 << 21) /* AHB Bus Lock */ +#define ATC_LOCK_IF_L (0x1 << 22) /* Master Interface Arbiter Lock */ +#define ATC_LOCK_IF_L_CHUNK (0x0 << 22) +#define ATC_LOCK_IF_L_BUFFER (0x1 << 22) +#define ATC_AHB_PROT_MASK (0x7 << 24) /* AHB Protection */ +#define ATC_FIFOCFG_MASK (0x3 << 28) /* FIFO Request Configuration */ +#define ATC_FIFOCFG_LARGESTBURST (0x0 << 28) +#define ATC_FIFOCFG_HALFFIFO (0x1 << 28) +#define ATC_FIFOCFG_ENOUGHSPACE (0x2 << 28) + +/* Bitfields in SPIP */ +#define ATC_SPIP_HOLE(x) (0xFFFFU & (x)) +#define ATC_SPIP_BOUNDARY(x) ((0x3FF & (x)) << 16) + +/* Bitfields in DPIP */ +#define ATC_DPIP_HOLE(x) (0xFFFFU & (x)) +#define ATC_DPIP_BOUNDARY(x) ((0x3FF & (x)) << 16) + + +/*-- descriptors -----------------------------------------------------*/ + +/* LLI == Linked List Item; aka DMA buffer descriptor */ +struct at_lli { + /* values that are not changed by hardware */ + dma_addr_t saddr; + dma_addr_t daddr; + /* value that may get written back: */ + u32 ctrla; + /* more values that are not changed by hardware */ + u32 ctrlb; + dma_addr_t dscr; /* chain to next lli */ +}; + +/** + * struct at_desc - software descriptor + * @at_lli: hardware lli structure + * @txd: support for the async_tx api + * @desc_node: node on the channed descriptors list + * @len: total transaction bytecount + */ +struct at_desc { + /* FIRST values the hardware uses */ + struct at_lli lli; + + /* THEN values for driver housekeeping */ + struct dma_async_tx_descriptor txd; + struct list_head desc_node; + size_t len; +}; + +static inline struct at_desc * +txd_to_at_desc(struct dma_async_tx_descriptor *txd) +{ + return container_of(txd, struct at_desc, txd); +} + + +/*-- Channels --------------------------------------------------------*/ + +/** + * struct at_dma_chan - internal representation of an Atmel HDMAC channel + * @chan_common: common dmaengine channel object members + * @device: parent device + * @ch_regs: memory mapped register base + * @mask: channel index in a mask + * @error_status: transmit error status information from irq handler + * to tasklet (use atomic operations) + * @tasklet: bottom half to finish transaction work + * @lock: serializes enqueue/dequeue operations to descriptors lists + * @completed_cookie: identifier for the most recently completed operation + * @active_list: list of descriptors dmaengine is being running on + * @queue: list of descriptors ready to be submitted to engine + * @free_list: list of descriptors usable by the channel + * @descs_allocated: records the actual size of the descriptor pool + */ +struct at_dma_chan { + struct dma_chan chan_common; + struct at_dma *device; + void __iomem *ch_regs; + u8 mask; + unsigned long error_status; + struct tasklet_struct tasklet; + + spinlock_t lock; + + /* these other elements are all protected by lock */ + dma_cookie_t completed_cookie; + struct list_head active_list; + struct list_head queue; + struct list_head free_list; + unsigned int descs_allocated; +}; + +#define channel_readl(atchan, name) \ + __raw_readl((atchan)->ch_regs + ATC_##name##_OFFSET) + +#define channel_writel(atchan, name, val) \ + __raw_writel((val), (atchan)->ch_regs + ATC_##name##_OFFSET) + +static inline struct at_dma_chan *to_at_dma_chan(struct dma_chan *dchan) +{ + return container_of(dchan, struct at_dma_chan, chan_common); +} + + +/*-- Controller ------------------------------------------------------*/ + +/** + * struct at_dma - internal representation of an Atmel HDMA Controller + * @chan_common: common dmaengine dma_device object members + * @ch_regs: memory mapped register base + * @clk: dma controller clock + * @all_chan_mask: all channels availlable in a mask + * @dma_desc_pool: base of DMA descriptor region (DMA address) + * @chan: channels table to store at_dma_chan structures + */ +struct at_dma { + struct dma_device dma_common; + void __iomem *regs; + struct clk *clk; + + u8 all_chan_mask; + + struct dma_pool *dma_desc_pool; + /* AT THE END channels table */ + struct at_dma_chan chan[0]; +}; + +#define dma_readl(atdma, name) \ + __raw_readl((atdma)->regs + AT_DMA_##name) +#define dma_writel(atdma, name, val) \ + __raw_writel((val), (atdma)->regs + AT_DMA_##name) + +static inline struct at_dma *to_at_dma(struct dma_device *ddev) +{ + return container_of(ddev, struct at_dma, dma_common); +} + + +/*-- Helper functions ------------------------------------------------*/ + +static struct device *chan2dev(struct dma_chan *chan) +{ + return &chan->dev->device; +} +static struct device *chan2parent(struct dma_chan *chan) +{ + return chan->dev->device.parent; +} + +#if defined(VERBOSE_DEBUG) +static void vdbg_dump_regs(struct at_dma_chan *atchan) +{ + struct at_dma *atdma = to_at_dma(atchan->chan_common.device); + + dev_err(chan2dev(&atchan->chan_common), + " channel %d : imr = 0x%x, chsr = 0x%x\n", + atchan->chan_common.chan_id, + dma_readl(atdma, EBCIMR), + dma_readl(atdma, CHSR)); + + dev_err(chan2dev(&atchan->chan_common), + " channel: s0x%x d0x%x ctrl0x%x:0x%x l0x%x\n", + channel_readl(atchan, SADDR), + channel_readl(atchan, DADDR), + channel_readl(atchan, CTRLA), + channel_readl(atchan, CTRLB), + channel_readl(atchan, DSCR)); +} +#else +static void vdbg_dump_regs(struct at_dma_chan *atchan) {} +#endif + +static void atc_dump_lli(struct at_dma_chan *atchan, struct at_lli *lli) +{ + dev_printk(KERN_CRIT, chan2dev(&atchan->chan_common), + " desc: s0x%x d0x%x ctrl0x%x:0x%x l0x%x\n", + lli->saddr, lli->daddr, + lli->ctrla, lli->ctrlb, lli->dscr); +} + + +static void atc_setup_irq(struct at_dma_chan *atchan, int on) +{ + struct at_dma *atdma = to_at_dma(atchan->chan_common.device); + u32 ebci; + + /* enable interrupts on buffer chain completion & error */ + ebci = AT_DMA_CBTC(atchan->chan_common.chan_id) + | AT_DMA_ERR(atchan->chan_common.chan_id); + if (on) + dma_writel(atdma, EBCIER, ebci); + else + dma_writel(atdma, EBCIDR, ebci); +} + +static inline void atc_enable_irq(struct at_dma_chan *atchan) +{ + atc_setup_irq(atchan, 1); +} + +static inline void atc_disable_irq(struct at_dma_chan *atchan) +{ + atc_setup_irq(atchan, 0); +} + + +/** + * atc_chan_is_enabled - test if given channel is enabled + * @atchan: channel we want to test status + */ +static inline int atc_chan_is_enabled(struct at_dma_chan *atchan) +{ + struct at_dma *atdma = to_at_dma(atchan->chan_common.device); + + return !!(dma_readl(atdma, CHSR) & atchan->mask); +} + + +/** + * set_desc_eol - set end-of-link to descriptor so it will end transfer + * @desc: descriptor, signle or at the end of a chain, to end chain on + */ +static void set_desc_eol(struct at_desc *desc) +{ + desc->lli.ctrlb |= ATC_SRC_DSCR_DIS | ATC_DST_DSCR_DIS; + desc->lli.dscr = 0; +} + +#endif /* AT_HDMAC_REGS_H */ -- cgit v1.2.3 From 808347f6a31792079e345ec865e9cfcb6e8ae6b2 Mon Sep 17 00:00:00 2001 From: Nicolas Ferre Date: Wed, 22 Jul 2009 20:04:45 +0200 Subject: dmaengine: at_hdmac: add DMA slave transfers This patch for at_hdmac adds the slave transfers capability to the Atmel DMA controller available on some AT91 SOCs. This allow peripheral to memory and memory to peripheral transfers with hardware handshaking. Slave structure for controller specific information is passed through channel private data. This at_dma_slave structure is defined in at_hdmac.h header file and relative hardware definition are moved to this file from at_hdmac_regs.h. Doing this we allow the channel configuration from platform definition code. This work is intensively based on dw_dmac and several slave implementations. Signed-off-by: Nicolas Ferre Signed-off-by: Dan Williams --- arch/arm/mach-at91/include/mach/at_hdmac.h | 76 +++++++++++ drivers/dma/at_hdmac.c | 208 ++++++++++++++++++++++++++++- drivers/dma/at_hdmac_regs.h | 49 ++----- 3 files changed, 290 insertions(+), 43 deletions(-) diff --git a/arch/arm/mach-at91/include/mach/at_hdmac.h b/arch/arm/mach-at91/include/mach/at_hdmac.h index 21a5554f9cb..187cb58345c 100644 --- a/arch/arm/mach-at91/include/mach/at_hdmac.h +++ b/arch/arm/mach-at91/include/mach/at_hdmac.h @@ -23,4 +23,80 @@ struct at_dma_platform_data { dma_cap_mask_t cap_mask; }; +/** + * enum at_dma_slave_width - DMA slave register access width. + * @AT_DMA_SLAVE_WIDTH_8BIT: Do 8-bit slave register accesses + * @AT_DMA_SLAVE_WIDTH_16BIT: Do 16-bit slave register accesses + * @AT_DMA_SLAVE_WIDTH_32BIT: Do 32-bit slave register accesses + */ +enum at_dma_slave_width { + AT_DMA_SLAVE_WIDTH_8BIT = 0, + AT_DMA_SLAVE_WIDTH_16BIT, + AT_DMA_SLAVE_WIDTH_32BIT, +}; + +/** + * struct at_dma_slave - Controller-specific information about a slave + * @dma_dev: required DMA master device + * @tx_reg: physical address of data register used for + * memory-to-peripheral transfers + * @rx_reg: physical address of data register used for + * peripheral-to-memory transfers + * @reg_width: peripheral register width + * @cfg: Platform-specific initializer for the CFG register + * @ctrla: Platform-specific initializer for the CTRLA register + */ +struct at_dma_slave { + struct device *dma_dev; + dma_addr_t tx_reg; + dma_addr_t rx_reg; + enum at_dma_slave_width reg_width; + u32 cfg; + u32 ctrla; +}; + + +/* Platform-configurable bits in CFG */ +#define ATC_SRC_PER(h) (0xFU & (h)) /* Channel src rq associated with periph handshaking ifc h */ +#define ATC_DST_PER(h) ((0xFU & (h)) << 4) /* Channel dst rq associated with periph handshaking ifc h */ +#define ATC_SRC_REP (0x1 << 8) /* Source Replay Mod */ +#define ATC_SRC_H2SEL (0x1 << 9) /* Source Handshaking Mod */ +#define ATC_SRC_H2SEL_SW (0x0 << 9) +#define ATC_SRC_H2SEL_HW (0x1 << 9) +#define ATC_DST_REP (0x1 << 12) /* Destination Replay Mod */ +#define ATC_DST_H2SEL (0x1 << 13) /* Destination Handshaking Mod */ +#define ATC_DST_H2SEL_SW (0x0 << 13) +#define ATC_DST_H2SEL_HW (0x1 << 13) +#define ATC_SOD (0x1 << 16) /* Stop On Done */ +#define ATC_LOCK_IF (0x1 << 20) /* Interface Lock */ +#define ATC_LOCK_B (0x1 << 21) /* AHB Bus Lock */ +#define ATC_LOCK_IF_L (0x1 << 22) /* Master Interface Arbiter Lock */ +#define ATC_LOCK_IF_L_CHUNK (0x0 << 22) +#define ATC_LOCK_IF_L_BUFFER (0x1 << 22) +#define ATC_AHB_PROT_MASK (0x7 << 24) /* AHB Protection */ +#define ATC_FIFOCFG_MASK (0x3 << 28) /* FIFO Request Configuration */ +#define ATC_FIFOCFG_LARGESTBURST (0x0 << 28) +#define ATC_FIFOCFG_HALFFIFO (0x1 << 28) +#define ATC_FIFOCFG_ENOUGHSPACE (0x2 << 28) + +/* Platform-configurable bits in CTRLA */ +#define ATC_SCSIZE_MASK (0x7 << 16) /* Source Chunk Transfer Size */ +#define ATC_SCSIZE_1 (0x0 << 16) +#define ATC_SCSIZE_4 (0x1 << 16) +#define ATC_SCSIZE_8 (0x2 << 16) +#define ATC_SCSIZE_16 (0x3 << 16) +#define ATC_SCSIZE_32 (0x4 << 16) +#define ATC_SCSIZE_64 (0x5 << 16) +#define ATC_SCSIZE_128 (0x6 << 16) +#define ATC_SCSIZE_256 (0x7 << 16) +#define ATC_DCSIZE_MASK (0x7 << 20) /* Destination Chunk Transfer Size */ +#define ATC_DCSIZE_1 (0x0 << 20) +#define ATC_DCSIZE_4 (0x1 << 20) +#define ATC_DCSIZE_8 (0x2 << 20) +#define ATC_DCSIZE_16 (0x3 << 20) +#define ATC_DCSIZE_32 (0x4 << 20) +#define ATC_DCSIZE_64 (0x5 << 20) +#define ATC_DCSIZE_128 (0x6 << 20) +#define ATC_DCSIZE_256 (0x7 << 20) + #endif /* AT_HDMAC_H */ diff --git a/drivers/dma/at_hdmac.c b/drivers/dma/at_hdmac.c index 64dbf0ce128..9a1e5fb412e 100644 --- a/drivers/dma/at_hdmac.c +++ b/drivers/dma/at_hdmac.c @@ -608,6 +608,187 @@ err_desc_get: return NULL; } + +/** + * atc_prep_slave_sg - prepare descriptors for a DMA_SLAVE transaction + * @chan: DMA channel + * @sgl: scatterlist to transfer to/from + * @sg_len: number of entries in @scatterlist + * @direction: DMA direction + * @flags: tx descriptor status flags + */ +static struct dma_async_tx_descriptor * +atc_prep_slave_sg(struct dma_chan *chan, struct scatterlist *sgl, + unsigned int sg_len, enum dma_data_direction direction, + unsigned long flags) +{ + struct at_dma_chan *atchan = to_at_dma_chan(chan); + struct at_dma_slave *atslave = chan->private; + struct at_desc *first = NULL; + struct at_desc *prev = NULL; + u32 ctrla; + u32 ctrlb; + dma_addr_t reg; + unsigned int reg_width; + unsigned int mem_width; + unsigned int i; + struct scatterlist *sg; + size_t total_len = 0; + + dev_vdbg(chan2dev(chan), "prep_slave_sg: %s f0x%lx\n", + direction == DMA_TO_DEVICE ? "TO DEVICE" : "FROM DEVICE", + flags); + + if (unlikely(!atslave || !sg_len)) { + dev_dbg(chan2dev(chan), "prep_dma_memcpy: length is zero!\n"); + return NULL; + } + + reg_width = atslave->reg_width; + + sg_len = dma_map_sg(chan2parent(chan), sgl, sg_len, direction); + + ctrla = ATC_DEFAULT_CTRLA | atslave->ctrla; + ctrlb = ATC_DEFAULT_CTRLB | ATC_IEN; + + switch (direction) { + case DMA_TO_DEVICE: + ctrla |= ATC_DST_WIDTH(reg_width); + ctrlb |= ATC_DST_ADDR_MODE_FIXED + | ATC_SRC_ADDR_MODE_INCR + | ATC_FC_MEM2PER; + reg = atslave->tx_reg; + for_each_sg(sgl, sg, sg_len, i) { + struct at_desc *desc; + u32 len; + u32 mem; + + desc = atc_desc_get(atchan); + if (!desc) + goto err_desc_get; + + mem = sg_phys(sg); + len = sg_dma_len(sg); + mem_width = 2; + if (unlikely(mem & 3 || len & 3)) + mem_width = 0; + + desc->lli.saddr = mem; + desc->lli.daddr = reg; + desc->lli.ctrla = ctrla + | ATC_SRC_WIDTH(mem_width) + | len >> mem_width; + desc->lli.ctrlb = ctrlb; + + if (!first) { + first = desc; + } else { + /* inform the HW lli about chaining */ + prev->lli.dscr = desc->txd.phys; + /* insert the link descriptor to the LD ring */ + list_add_tail(&desc->desc_node, + &first->txd.tx_list); + } + prev = desc; + total_len += len; + } + break; + case DMA_FROM_DEVICE: + ctrla |= ATC_SRC_WIDTH(reg_width); + ctrlb |= ATC_DST_ADDR_MODE_INCR + | ATC_SRC_ADDR_MODE_FIXED + | ATC_FC_PER2MEM; + + reg = atslave->rx_reg; + for_each_sg(sgl, sg, sg_len, i) { + struct at_desc *desc; + u32 len; + u32 mem; + + desc = atc_desc_get(atchan); + if (!desc) + goto err_desc_get; + + mem = sg_phys(sg); + len = sg_dma_len(sg); + mem_width = 2; + if (unlikely(mem & 3 || len & 3)) + mem_width = 0; + + desc->lli.saddr = reg; + desc->lli.daddr = mem; + desc->lli.ctrla = ctrla + | ATC_DST_WIDTH(mem_width) + | len >> mem_width; + desc->lli.ctrlb = ctrlb; + + if (!first) { + first = desc; + } else { + /* inform the HW lli about chaining */ + prev->lli.dscr = desc->txd.phys; + /* insert the link descriptor to the LD ring */ + list_add_tail(&desc->desc_node, + &first->txd.tx_list); + } + prev = desc; + total_len += len; + } + break; + default: + return NULL; + } + + /* set end-of-link to the last link descriptor of list*/ + set_desc_eol(prev); + + /* First descriptor of the chain embedds additional information */ + first->txd.cookie = -EBUSY; + first->len = total_len; + + /* last link descriptor of list is responsible of flags */ + prev->txd.flags = flags; /* client is in control of this ack */ + + return &first->txd; + +err_desc_get: + dev_err(chan2dev(chan), "not enough descriptors available\n"); + atc_desc_put(atchan, first); + return NULL; +} + +static void atc_terminate_all(struct dma_chan *chan) +{ + struct at_dma_chan *atchan = to_at_dma_chan(chan); + struct at_dma *atdma = to_at_dma(chan->device); + struct at_desc *desc, *_desc; + LIST_HEAD(list); + + /* + * This is only called when something went wrong elsewhere, so + * we don't really care about the data. Just disable the + * channel. We still have to poll the channel enable bit due + * to AHB/HSB limitations. + */ + spin_lock_bh(&atchan->lock); + + dma_writel(atdma, CHDR, atchan->mask); + + /* confirm that this channel is disabled */ + while (dma_readl(atdma, CHSR) & atchan->mask) + cpu_relax(); + + /* active_list entries will end up before queued entries */ + list_splice_init(&atchan->queue, &list); + list_splice_init(&atchan->active_list, &list); + + spin_unlock_bh(&atchan->lock); + + /* Flush all pending and queued descriptors */ + list_for_each_entry_safe(desc, _desc, &list, desc_node) + atc_chain_complete(atchan, desc); +} + /** * atc_is_tx_complete - poll for transaction completion * @chan: DMA channel @@ -686,7 +867,9 @@ static int atc_alloc_chan_resources(struct dma_chan *chan) struct at_dma_chan *atchan = to_at_dma_chan(chan); struct at_dma *atdma = to_at_dma(chan->device); struct at_desc *desc; + struct at_dma_slave *atslave; int i; + u32 cfg; LIST_HEAD(tmp_list); dev_vdbg(chan2dev(chan), "alloc_chan_resources\n"); @@ -697,7 +880,23 @@ static int atc_alloc_chan_resources(struct dma_chan *chan) return -EIO; } - /* have we already been set up? */ + cfg = ATC_DEFAULT_CFG; + + atslave = chan->private; + if (atslave) { + /* + * We need controller-specific data to set up slave + * transfers. + */ + BUG_ON(!atslave->dma_dev || atslave->dma_dev != atdma->dma_common.dev); + + /* if cfg configuration specified take it instad of default */ + if (atslave->cfg) + cfg = atslave->cfg; + } + + /* have we already been set up? + * reconfigure channel but no need to reallocate descriptors */ if (!list_empty(&atchan->free_list)) return atchan->descs_allocated; @@ -719,7 +918,7 @@ static int atc_alloc_chan_resources(struct dma_chan *chan) spin_unlock_bh(&atchan->lock); /* channel parameters */ - channel_writel(atchan, CFG, ATC_DEFAULT_CFG); + channel_writel(atchan, CFG, cfg); dev_dbg(chan2dev(chan), "alloc_chan_resources: allocated %d descriptors\n", @@ -888,6 +1087,11 @@ static int __init at_dma_probe(struct platform_device *pdev) if (dma_has_cap(DMA_MEMCPY, atdma->dma_common.cap_mask)) atdma->dma_common.device_prep_dma_memcpy = atc_prep_dma_memcpy; + if (dma_has_cap(DMA_SLAVE, atdma->dma_common.cap_mask)) { + atdma->dma_common.device_prep_slave_sg = atc_prep_slave_sg; + atdma->dma_common.device_terminate_all = atc_terminate_all; + } + dma_writel(atdma, EN, AT_DMA_ENABLE); dev_info(&pdev->dev, "Atmel AHB DMA Controller ( %s%s), %d channels\n", diff --git a/drivers/dma/at_hdmac_regs.h b/drivers/dma/at_hdmac_regs.h index ad2d4f402bf..4c972afc49e 100644 --- a/drivers/dma/at_hdmac_regs.h +++ b/drivers/dma/at_hdmac_regs.h @@ -87,29 +87,14 @@ /* Bitfields in CTRLA */ #define ATC_BTSIZE_MAX 0xFFFFUL /* Maximum Buffer Transfer Size */ #define ATC_BTSIZE(x) (ATC_BTSIZE_MAX & (x)) /* Buffer Transfer Size */ -#define ATC_SCSIZE_MASK (0x7 << 16) /* Source Chunk Transfer Size */ -#define ATC_SCSIZE_1 (0x0 << 16) -#define ATC_SCSIZE_4 (0x1 << 16) -#define ATC_SCSIZE_8 (0x2 << 16) -#define ATC_SCSIZE_16 (0x3 << 16) -#define ATC_SCSIZE_32 (0x4 << 16) -#define ATC_SCSIZE_64 (0x5 << 16) -#define ATC_SCSIZE_128 (0x6 << 16) -#define ATC_SCSIZE_256 (0x7 << 16) -#define ATC_DCSIZE_MASK (0x7 << 20) /* Destination Chunk Transfer Size */ -#define ATC_DCSIZE_1 (0x0 << 20) -#define ATC_DCSIZE_4 (0x1 << 20) -#define ATC_DCSIZE_8 (0x2 << 20) -#define ATC_DCSIZE_16 (0x3 << 20) -#define ATC_DCSIZE_32 (0x4 << 20) -#define ATC_DCSIZE_64 (0x5 << 20) -#define ATC_DCSIZE_128 (0x6 << 20) -#define ATC_DCSIZE_256 (0x7 << 20) +/* Chunck Tranfer size definitions are in at_hdmac.h */ #define ATC_SRC_WIDTH_MASK (0x3 << 24) /* Source Single Transfer Size */ +#define ATC_SRC_WIDTH(x) ((x) << 24) #define ATC_SRC_WIDTH_BYTE (0x0 << 24) #define ATC_SRC_WIDTH_HALFWORD (0x1 << 24) #define ATC_SRC_WIDTH_WORD (0x2 << 24) #define ATC_DST_WIDTH_MASK (0x3 << 28) /* Destination Single Transfer Size */ +#define ATC_DST_WIDTH(x) ((x) << 28) #define ATC_DST_WIDTH_BYTE (0x0 << 28) #define ATC_DST_WIDTH_HALFWORD (0x1 << 28) #define ATC_DST_WIDTH_WORD (0x2 << 28) @@ -129,7 +114,8 @@ #define ATC_FC_PER2PER (0x3 << 21) /* Periph-to-Periph (DMA) */ #define ATC_FC_PER2MEM_PER (0x4 << 21) /* Periph-to-Mem (Peripheral) */ #define ATC_FC_MEM2PER_PER (0x5 << 21) /* Mem-to-Periph (Peripheral) */ -#define ATC_FC_PER2PER_PER (0x6 << 21) /* Periph-to-Periph (Src Peripheral) */ +#define ATC_FC_PER2PER_SRCPER (0x6 << 21) /* Periph-to-Periph (Src Peripheral) */ +#define ATC_FC_PER2PER_DSTPER (0x7 << 21) /* Periph-to-Periph (Dst Peripheral) */ #define ATC_SRC_ADDR_MODE_MASK (0x3 << 24) #define ATC_SRC_ADDR_MODE_INCR (0x0 << 24) /* Incrementing Mode */ #define ATC_SRC_ADDR_MODE_DECR (0x1 << 24) /* Decrementing Mode */ @@ -142,27 +128,7 @@ #define ATC_AUTO (0x1 << 31) /* Auto multiple buffer tx enable */ /* Bitfields in CFG */ -#define ATC_SRC_PER(h) (0xFU & (h)) /* Channel src rq associated with periph handshaking ifc h */ -#define ATC_DST_PER(h) ((0xFU & (h)) << 4) /* Channel dst rq associated with periph handshaking ifc h */ -#define ATC_SRC_REP (0x1 << 8) /* Source Replay Mod */ -#define ATC_SRC_H2SEL (0x1 << 9) /* Source Handshaking Mod */ -#define ATC_SRC_H2SEL_SW (0x0 << 9) -#define ATC_SRC_H2SEL_HW (0x1 << 9) -#define ATC_DST_REP (0x1 << 12) /* Destination Replay Mod */ -#define ATC_DST_H2SEL (0x1 << 13) /* Destination Handshaking Mod */ -#define ATC_DST_H2SEL_SW (0x0 << 13) -#define ATC_DST_H2SEL_HW (0x1 << 13) -#define ATC_SOD (0x1 << 16) /* Stop On Done */ -#define ATC_LOCK_IF (0x1 << 20) /* Interface Lock */ -#define ATC_LOCK_B (0x1 << 21) /* AHB Bus Lock */ -#define ATC_LOCK_IF_L (0x1 << 22) /* Master Interface Arbiter Lock */ -#define ATC_LOCK_IF_L_CHUNK (0x0 << 22) -#define ATC_LOCK_IF_L_BUFFER (0x1 << 22) -#define ATC_AHB_PROT_MASK (0x7 << 24) /* AHB Protection */ -#define ATC_FIFOCFG_MASK (0x3 << 28) /* FIFO Request Configuration */ -#define ATC_FIFOCFG_LARGESTBURST (0x0 << 28) -#define ATC_FIFOCFG_HALFFIFO (0x1 << 28) -#define ATC_FIFOCFG_ENOUGHSPACE (0x2 << 28) +/* are in at_hdmac.h */ /* Bitfields in SPIP */ #define ATC_SPIP_HOLE(x) (0xFFFFU & (x)) @@ -316,11 +282,12 @@ static void vdbg_dump_regs(struct at_dma_chan *atchan) dma_readl(atdma, CHSR)); dev_err(chan2dev(&atchan->chan_common), - " channel: s0x%x d0x%x ctrl0x%x:0x%x l0x%x\n", + " channel: s0x%x d0x%x ctrl0x%x:0x%x cfg0x%x l0x%x\n", channel_readl(atchan, SADDR), channel_readl(atchan, DADDR), channel_readl(atchan, CTRLA), channel_readl(atchan, CTRLB), + channel_readl(atchan, CFG), channel_readl(atchan, DSCR)); } #else -- cgit v1.2.3 From 06c71282a90470184a78f7f0ab0f7ce0fc1f69c8 Mon Sep 17 00:00:00 2001 From: Chaithrika U S Date: Wed, 22 Jul 2009 07:45:04 -0400 Subject: ASoC: tlv320aic3x: Enable PLL when not bypassed PLL was not being enabled when it was not bypassed. This patch enables the PLL when it is used. Additionally, it disables the PLL when it is bypassed. Without this patch, the audio on TI DM646x EVM and DM355 EVM does not work properly. The bit clocks and the frame sync signals from the codec are not correct and hence the playback/record are faster than usual for most sample rates. The reason for this was that the PLL was not enabled when it was not bypassed. Tested on DM6467 EVM, playback tested on DM355 EVM. Signed-off-by: Chaithrika U S Signed-off-by: Mark Brown --- sound/soc/codecs/tlv320aic3x.c | 11 ++++++++++- 1 file changed, 10 insertions(+), 1 deletion(-) diff --git a/sound/soc/codecs/tlv320aic3x.c b/sound/soc/codecs/tlv320aic3x.c index ab099f48248..cb0d1bf34b5 100644 --- a/sound/soc/codecs/tlv320aic3x.c +++ b/sound/soc/codecs/tlv320aic3x.c @@ -767,6 +767,7 @@ static int aic3x_hw_params(struct snd_pcm_substream *substream, int codec_clk = 0, bypass_pll = 0, fsref, last_clk = 0; u8 data, r, p, pll_q, pll_p = 1, pll_r = 1, pll_j = 1; u16 pll_d = 1; + u8 reg; /* select data word length */ data = @@ -801,8 +802,16 @@ static int aic3x_hw_params(struct snd_pcm_substream *substream, pll_q &= 0xf; aic3x_write(codec, AIC3X_PLL_PROGA_REG, pll_q << PLLQ_SHIFT); aic3x_write(codec, AIC3X_GPIOB_REG, CODEC_CLKIN_CLKDIV); - } else + /* disable PLL if it is bypassed */ + reg = aic3x_read_reg_cache(codec, AIC3X_PLL_PROGA_REG); + aic3x_write(codec, AIC3X_PLL_PROGA_REG, reg & ~PLL_ENABLE); + + } else { aic3x_write(codec, AIC3X_GPIOB_REG, CODEC_CLKIN_PLLDIV); + /* enable PLL when it is used */ + reg = aic3x_read_reg_cache(codec, AIC3X_PLL_PROGA_REG); + aic3x_write(codec, AIC3X_PLL_PROGA_REG, reg | PLL_ENABLE); + } /* Route Left DAC to left channel input and * right DAC to right channel input */ -- cgit v1.2.3 From cedb8118e8cef21a2b73fd9cb70660ac19124c16 Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Thu, 23 Jul 2009 11:04:13 +0200 Subject: ALSA: pcm - Add logging of hwptr updates and interrupt updates Added the logging functionality to xrun_debug to record the hwptr updates via snd_pcm_update_hw_ptr() and snd_pcm_update_hwptr_interrupt(), corresponding to 16 and 8, respectively. For example, # echo 9 > /proc/asound/card0/pcm0p/xrun_debug will record the position and other parameters at each period interrupt together with the normal XRUN debugging. Signed-off-by: Takashi Iwai --- Documentation/sound/alsa/Procfile.txt | 5 +++++ sound/core/pcm_lib.c | 25 +++++++++++++++++++++++++ 2 files changed, 30 insertions(+) diff --git a/Documentation/sound/alsa/Procfile.txt b/Documentation/sound/alsa/Procfile.txt index 381908d8ca4..719a819f8cc 100644 --- a/Documentation/sound/alsa/Procfile.txt +++ b/Documentation/sound/alsa/Procfile.txt @@ -101,6 +101,8 @@ card*/pcm*/xrun_debug bit 0 = Enable XRUN/jiffies debug messages bit 1 = Show stack trace at XRUN / jiffies check bit 2 = Enable additional jiffies check + bit 3 = Log hwptr update at each period interrupt + bit 4 = Log hwptr update at each snd_pcm_update_hw_ptr() When the bit 0 is set, the driver will show the messages to kernel log when an xrun is detected. The debug message is @@ -117,6 +119,9 @@ card*/pcm*/xrun_debug buggy) hardware that doesn't give smooth pointer updates. This feature is enabled via the bit 2. + Bits 3 and 4 are for logging the hwptr records. Note that + these will give flood of kernel messages. + card*/pcm*/sub*/info The general information of this PCM sub-stream. diff --git a/sound/core/pcm_lib.c b/sound/core/pcm_lib.c index 3b673e2f991..065eaf0a386 100644 --- a/sound/core/pcm_lib.c +++ b/sound/core/pcm_lib.c @@ -233,6 +233,18 @@ static int snd_pcm_update_hw_ptr_interrupt(struct snd_pcm_substream *substream) xrun(substream); return -EPIPE; } + if (xrun_debug(substream, 8)) { + char name[16]; + pcm_debug_name(substream, name, sizeof(name)); + snd_printd("period_update: %s: pos=0x%x/0x%x/0x%x, " + "hwptr=0x%lx, hw_base=0x%lx, hw_intr=0x%lx\n", + name, pos, + (int)runtime->period_size, + (int)runtime->buffer_size, + (long)old_hw_ptr, + (long)runtime->hw_ptr_base, + (long)runtime->hw_ptr_interrupt); + } hw_base = runtime->hw_ptr_base; new_hw_ptr = hw_base + pos; hw_ptr_interrupt = runtime->hw_ptr_interrupt + runtime->period_size; @@ -353,6 +365,19 @@ int snd_pcm_update_hw_ptr(struct snd_pcm_substream *substream) xrun(substream); return -EPIPE; } + if (xrun_debug(substream, 16)) { + char name[16]; + pcm_debug_name(substream, name, sizeof(name)); + snd_printd("hw_update: %s: pos=0x%x/0x%x/0x%x, " + "hwptr=0x%lx, hw_base=0x%lx, hw_intr=0x%lx\n", + name, pos, + (int)runtime->period_size, + (int)runtime->buffer_size, + (long)old_hw_ptr, + (long)runtime->hw_ptr_base, + (long)runtime->hw_ptr_interrupt); + } + hw_base = runtime->hw_ptr_base; new_hw_ptr = hw_base + pos; -- cgit v1.2.3 From 89350640439e0160056de26995d52deb18202b3e Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Thu, 23 Jul 2009 14:28:37 +0200 Subject: ALSA: pcm - Fix warnings in debug loggings Add proper cast. Signed-off-by: Takashi Iwai --- sound/core/pcm_lib.c | 24 ++++++++++++------------ 1 file changed, 12 insertions(+), 12 deletions(-) diff --git a/sound/core/pcm_lib.c b/sound/core/pcm_lib.c index 065eaf0a386..d315f72949f 100644 --- a/sound/core/pcm_lib.c +++ b/sound/core/pcm_lib.c @@ -238,12 +238,12 @@ static int snd_pcm_update_hw_ptr_interrupt(struct snd_pcm_substream *substream) pcm_debug_name(substream, name, sizeof(name)); snd_printd("period_update: %s: pos=0x%x/0x%x/0x%x, " "hwptr=0x%lx, hw_base=0x%lx, hw_intr=0x%lx\n", - name, pos, - (int)runtime->period_size, - (int)runtime->buffer_size, - (long)old_hw_ptr, - (long)runtime->hw_ptr_base, - (long)runtime->hw_ptr_interrupt); + name, (unsigned int)pos, + (unsigned int)runtime->period_size, + (unsigned int)runtime->buffer_size, + (unsigned long)old_hw_ptr, + (unsigned long)runtime->hw_ptr_base, + (unsigned long)runtime->hw_ptr_interrupt); } hw_base = runtime->hw_ptr_base; new_hw_ptr = hw_base + pos; @@ -370,12 +370,12 @@ int snd_pcm_update_hw_ptr(struct snd_pcm_substream *substream) pcm_debug_name(substream, name, sizeof(name)); snd_printd("hw_update: %s: pos=0x%x/0x%x/0x%x, " "hwptr=0x%lx, hw_base=0x%lx, hw_intr=0x%lx\n", - name, pos, - (int)runtime->period_size, - (int)runtime->buffer_size, - (long)old_hw_ptr, - (long)runtime->hw_ptr_base, - (long)runtime->hw_ptr_interrupt); + name, (unsigned int)pos, + (unsigned int)runtime->period_size, + (unsigned int)runtime->buffer_size, + (unsigned long)old_hw_ptr, + (unsigned long)runtime->hw_ptr_base, + (unsigned long)runtime->hw_ptr_interrupt); } hw_base = runtime->hw_ptr_base; -- cgit v1.2.3 From d8cc1ab793993c886c62abf77c93287df33ffd8b Mon Sep 17 00:00:00 2001 From: Li Zefan Date: Thu, 23 Jul 2009 11:28:40 +0800 Subject: trace_stack: Fix seqfile memory leak Every time we cat stack_trace, we leak memory allocated by seq_open(). Signed-off-by: Li Zefan LKML-Reference: <4A67D8E8.3020500@cn.fujitsu.com> Signed-off-by: Steven Rostedt --- kernel/trace/trace_stack.c | 7 ++----- 1 file changed, 2 insertions(+), 5 deletions(-) diff --git a/kernel/trace/trace_stack.c b/kernel/trace/trace_stack.c index e644af91012..6a2a9d484cd 100644 --- a/kernel/trace/trace_stack.c +++ b/kernel/trace/trace_stack.c @@ -301,17 +301,14 @@ static const struct seq_operations stack_trace_seq_ops = { static int stack_trace_open(struct inode *inode, struct file *file) { - int ret; - - ret = seq_open(file, &stack_trace_seq_ops); - - return ret; + return seq_open(file, &stack_trace_seq_ops); } static const struct file_operations stack_trace_fops = { .open = stack_trace_open, .read = seq_read, .llseek = seq_lseek, + .release = seq_release, }; int -- cgit v1.2.3 From 87827111a5538633b18e5c641ced673c4c2bb6ce Mon Sep 17 00:00:00 2001 From: Li Zefan Date: Thu, 23 Jul 2009 11:29:11 +0800 Subject: function-graph: Fix seqfile memory leak Every time we cat set_graph_function, we leak memory allocated by seq_open(). Signed-off-by: Li Zefan LKML-Reference: <4A67D907.2010500@cn.fujitsu.com> Signed-off-by: Steven Rostedt --- kernel/trace/ftrace.c | 15 ++++++++++++--- 1 file changed, 12 insertions(+), 3 deletions(-) diff --git a/kernel/trace/ftrace.c b/kernel/trace/ftrace.c index 4521c77d1a1..1f3ec2afa51 100644 --- a/kernel/trace/ftrace.c +++ b/kernel/trace/ftrace.c @@ -2595,6 +2595,14 @@ ftrace_graph_open(struct inode *inode, struct file *file) return ret; } +static int +ftrace_graph_release(struct inode *inode, struct file *file) +{ + if (file->f_mode & FMODE_READ) + seq_release(inode, file); + return 0; +} + static int ftrace_set_func(unsigned long *array, int *idx, char *buffer) { @@ -2724,9 +2732,10 @@ ftrace_graph_write(struct file *file, const char __user *ubuf, } static const struct file_operations ftrace_graph_fops = { - .open = ftrace_graph_open, - .read = seq_read, - .write = ftrace_graph_write, + .open = ftrace_graph_open, + .read = seq_read, + .write = ftrace_graph_write, + .release = ftrace_graph_release, }; #endif /* CONFIG_FUNCTION_GRAPH_TRACER */ -- cgit v1.2.3 From 636eacee3b0c76915151db37203cc624becb6d7b Mon Sep 17 00:00:00 2001 From: Li Zefan Date: Thu, 23 Jul 2009 11:29:47 +0800 Subject: tracing/stat: Fix seqfile memory leak Every time we cat a trace_stat file, we leak memory allocated by seq_open(). Also fix memory leak in a failure path in tracing_stat_open(). Signed-off-by: Li Zefan LKML-Reference: <4A67D92B.4060704@cn.fujitsu.com> Signed-off-by: Steven Rostedt --- kernel/trace/trace_stat.c | 34 ++++++++++++++++++++++------------ 1 file changed, 22 insertions(+), 12 deletions(-) diff --git a/kernel/trace/trace_stat.c b/kernel/trace/trace_stat.c index e66f5e49334..aea321c82fa 100644 --- a/kernel/trace/trace_stat.c +++ b/kernel/trace/trace_stat.c @@ -73,7 +73,7 @@ static struct rb_node *release_next(struct rb_node *node) } } -static void reset_stat_session(struct stat_session *session) +static void __reset_stat_session(struct stat_session *session) { struct rb_node *node = session->stat_root.rb_node; @@ -83,10 +83,17 @@ static void reset_stat_session(struct stat_session *session) session->stat_root = RB_ROOT; } +static void reset_stat_session(struct stat_session *session) +{ + mutex_lock(&session->stat_mutex); + __reset_stat_session(session); + mutex_unlock(&session->stat_mutex); +} + static void destroy_session(struct stat_session *session) { debugfs_remove(session->file); - reset_stat_session(session); + __reset_stat_session(session); mutex_destroy(&session->stat_mutex); kfree(session); } @@ -150,7 +157,7 @@ static int stat_seq_init(struct stat_session *session) int i; mutex_lock(&session->stat_mutex); - reset_stat_session(session); + __reset_stat_session(session); if (!ts->stat_cmp) ts->stat_cmp = dummy_cmp; @@ -183,7 +190,7 @@ exit: return ret; exit_free_rbtree: - reset_stat_session(session); + __reset_stat_session(session); mutex_unlock(&session->stat_mutex); return ret; } @@ -250,16 +257,21 @@ static const struct seq_operations trace_stat_seq_ops = { static int tracing_stat_open(struct inode *inode, struct file *file) { int ret; - + struct seq_file *m; struct stat_session *session = inode->i_private; + ret = stat_seq_init(session); + if (ret) + return ret; + ret = seq_open(file, &trace_stat_seq_ops); - if (!ret) { - struct seq_file *m = file->private_data; - m->private = session; - ret = stat_seq_init(session); + if (ret) { + reset_stat_session(session); + return ret; } + m = file->private_data; + m->private = session; return ret; } @@ -270,11 +282,9 @@ static int tracing_stat_release(struct inode *i, struct file *f) { struct stat_session *session = i->i_private; - mutex_lock(&session->stat_mutex); reset_stat_session(session); - mutex_unlock(&session->stat_mutex); - return 0; + return seq_release(i, f); } static const struct file_operations tracing_stat_fops = { -- cgit v1.2.3 From 947ca210f1df7656e19890832cb71fc3bdd88707 Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Thu, 23 Jul 2009 16:21:08 +0200 Subject: ALSA: pcm - Fix hwptr buffer-size overlap bug The fix 79452f0a28aa5a40522c487b42a5fc423647ad98 introduced another bug due to the missing offset for the overlapped hwptr. When the hwptr goes back to zero, the delta value has to be corrected with the buffer size. Otherwise this causes looping sounds. Signed-off-by: Takashi Iwai --- sound/core/pcm_lib.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/sound/core/pcm_lib.c b/sound/core/pcm_lib.c index d315f72949f..72cfd47af6b 100644 --- a/sound/core/pcm_lib.c +++ b/sound/core/pcm_lib.c @@ -256,7 +256,7 @@ static int snd_pcm_update_hw_ptr_interrupt(struct snd_pcm_substream *substream) delta = new_hw_ptr - hw_ptr_interrupt; } if (delta < 0) { - if (runtime->periods == 1) + if (runtime->periods == 1 || new_hw_ptr < old_hw_ptr) delta += runtime->buffer_size; if (delta < 0) { hw_ptr_error(substream, -- cgit v1.2.3 From b30c4947735f9d76da3d194923efd38ed18ad651 Mon Sep 17 00:00:00 2001 From: Daniel Mack Date: Wed, 22 Jul 2009 14:13:35 +0200 Subject: ALSA: snd_usb_caiaq: add support for Audio2DJ This adds support for Native Instrument's freshly announced Audio2DJ sound device hardware. Version number bumped to 1.3.19. Signed-off-by: Daniel Mack Signed-off-by: Takashi Iwai --- sound/usb/Kconfig | 1 + sound/usb/caiaq/audio.c | 1 + sound/usb/caiaq/device.c | 8 +++++++- sound/usb/caiaq/device.h | 1 + 4 files changed, 10 insertions(+), 1 deletion(-) diff --git a/sound/usb/Kconfig b/sound/usb/Kconfig index 523aec188cc..73525c048e7 100644 --- a/sound/usb/Kconfig +++ b/sound/usb/Kconfig @@ -48,6 +48,7 @@ config SND_USB_CAIAQ * Native Instruments Kore Controller * Native Instruments Kore Controller 2 * Native Instruments Audio Kontrol 1 + * Native Instruments Audio 2 DJ * Native Instruments Audio 4 DJ * Native Instruments Audio 8 DJ * Native Instruments Guitar Rig Session I/O diff --git a/sound/usb/caiaq/audio.c b/sound/usb/caiaq/audio.c index 8f9b60c5d74..121af0644fd 100644 --- a/sound/usb/caiaq/audio.c +++ b/sound/usb/caiaq/audio.c @@ -646,6 +646,7 @@ int snd_usb_caiaq_audio_init(struct snd_usb_caiaqdev *dev) case USB_ID(USB_VID_NATIVEINSTRUMENTS, USB_PID_GUITARRIGMOBILE): dev->samplerates |= SNDRV_PCM_RATE_192000; /* fall thru */ + case USB_ID(USB_VID_NATIVEINSTRUMENTS, USB_PID_AUDIO2DJ): case USB_ID(USB_VID_NATIVEINSTRUMENTS, USB_PID_AUDIO4DJ): case USB_ID(USB_VID_NATIVEINSTRUMENTS, USB_PID_AUDIO8DJ): dev->samplerates |= SNDRV_PCM_RATE_88200; diff --git a/sound/usb/caiaq/device.c b/sound/usb/caiaq/device.c index de38108f0b2..83e6c1312d4 100644 --- a/sound/usb/caiaq/device.c +++ b/sound/usb/caiaq/device.c @@ -35,13 +35,14 @@ #include "input.h" MODULE_AUTHOR("Daniel Mack "); -MODULE_DESCRIPTION("caiaq USB audio, version 1.3.18"); +MODULE_DESCRIPTION("caiaq USB audio, version 1.3.19"); MODULE_LICENSE("GPL"); MODULE_SUPPORTED_DEVICE("{{Native Instruments, RigKontrol2}," "{Native Instruments, RigKontrol3}," "{Native Instruments, Kore Controller}," "{Native Instruments, Kore Controller 2}," "{Native Instruments, Audio Kontrol 1}," + "{Native Instruments, Audio 2 DJ}," "{Native Instruments, Audio 4 DJ}," "{Native Instruments, Audio 8 DJ}," "{Native Instruments, Session I/O}," @@ -121,6 +122,11 @@ static struct usb_device_id snd_usb_id_table[] = { .idVendor = USB_VID_NATIVEINSTRUMENTS, .idProduct = USB_PID_AUDIO4DJ }, + { + .match_flags = USB_DEVICE_ID_MATCH_DEVICE, + .idVendor = USB_VID_NATIVEINSTRUMENTS, + .idProduct = USB_PID_AUDIO2DJ + }, { /* terminator */ } }; diff --git a/sound/usb/caiaq/device.h b/sound/usb/caiaq/device.h index ece73514854..44e3edf88be 100644 --- a/sound/usb/caiaq/device.h +++ b/sound/usb/caiaq/device.h @@ -10,6 +10,7 @@ #define USB_PID_KORECONTROLLER 0x4711 #define USB_PID_KORECONTROLLER2 0x4712 #define USB_PID_AK1 0x0815 +#define USB_PID_AUDIO2DJ 0x041c #define USB_PID_AUDIO4DJ 0x0839 #define USB_PID_AUDIO8DJ 0x1978 #define USB_PID_SESSIONIO 0x1915 -- cgit v1.2.3 From 4a19fb11a90fdbbcb3bc02effa036230d035ca28 Mon Sep 17 00:00:00 2001 From: Stefan Bader Date: Thu, 23 Jul 2009 11:26:05 +0200 Subject: jfs: Fix early release of acl in jfs_get_acl BugLink: http://bugs.launchpad.net/ubuntu/+bug/396780 Commit 073aaa1b142461d91f83da66db1184d7c1b1edea "helpers for acl caching + switch to those" introduced new helper functions for acl handling but seems to have introduced a regression for jfs as the acl is released before returning it to the caller, instead of leaving this for the caller to do. This causes the acl object to be used after freeing it, leading to kernel panics in completely different places. Thanks to Christophe Dumez for reporting and bisecting into this. Reported-by: Christophe Dumez Tested-by: Christophe Dumez Signed-off-by: Stefan Bader Acked-by: Andy Whitcroft Signed-off-by: Dave Kleikamp --- fs/jfs/acl.c | 4 +--- 1 file changed, 1 insertion(+), 3 deletions(-) diff --git a/fs/jfs/acl.c b/fs/jfs/acl.c index 91fa3ad6e8c..a29c7c3e3fb 100644 --- a/fs/jfs/acl.c +++ b/fs/jfs/acl.c @@ -67,10 +67,8 @@ static struct posix_acl *jfs_get_acl(struct inode *inode, int type) acl = posix_acl_from_xattr(value, size); } kfree(value); - if (!IS_ERR(acl)) { + if (!IS_ERR(acl)) set_cached_acl(inode, type, acl); - posix_acl_release(acl); - } return acl; } -- cgit v1.2.3 From dacac4da5290ee3f3f413bd6980af2befb813e28 Mon Sep 17 00:00:00 2001 From: Mark Ware Date: Thu, 23 Jul 2009 10:56:48 -0700 Subject: net: Rework mdio-ofgpio driver to use of_mdio infrastructure Changes to the fs_enet driver aa73832c5a80d6c52c69b18af858d88fa595dd3c ("net: Rework fs_enet driver to use of_mdio infrastructure") cause kernel crashes when using the mdio-ofgpio driver. This patch replicates similar changes made to the fs_enet mii-bitbang drivers. It has been tested on a custom mpc8280 based board using an NFS mounted root. Signed-off-by: Mark Ware Acked-by: Grant Likely Signed-off-by: David S. Miller --- drivers/net/phy/mdio-gpio.c | 77 +++++++++++++++++++++------------------------ 1 file changed, 36 insertions(+), 41 deletions(-) diff --git a/drivers/net/phy/mdio-gpio.c b/drivers/net/phy/mdio-gpio.c index 33984b73723..22cdd451fb8 100644 --- a/drivers/net/phy/mdio-gpio.c +++ b/drivers/net/phy/mdio-gpio.c @@ -30,6 +30,7 @@ #ifdef CONFIG_OF_GPIO #include +#include #include #endif @@ -81,13 +82,12 @@ static struct mdiobb_ops mdio_gpio_ops = { .get_mdio_data = mdio_get, }; -static int __devinit mdio_gpio_bus_init(struct device *dev, +static struct mii_bus * __devinit mdio_gpio_bus_init(struct device *dev, struct mdio_gpio_platform_data *pdata, int bus_id) { struct mii_bus *new_bus; struct mdio_gpio_info *bitbang; - int ret = -ENOMEM; int i; bitbang = kzalloc(sizeof(*bitbang), GFP_KERNEL); @@ -104,8 +104,6 @@ static int __devinit mdio_gpio_bus_init(struct device *dev, new_bus->name = "GPIO Bitbanged MDIO", - ret = -ENODEV; - new_bus->phy_mask = pdata->phy_mask; new_bus->irq = pdata->irqs; new_bus->parent = dev; @@ -129,15 +127,8 @@ static int __devinit mdio_gpio_bus_init(struct device *dev, dev_set_drvdata(dev, new_bus); - ret = mdiobus_register(new_bus); - if (ret) - goto out_free_all; - - return 0; + return new_bus; -out_free_all: - dev_set_drvdata(dev, NULL); - gpio_free(bitbang->mdio); out_free_mdc: gpio_free(bitbang->mdc); out_free_bus: @@ -145,30 +136,47 @@ out_free_bus: out_free_bitbang: kfree(bitbang); out: - return ret; + return NULL; } -static void __devexit mdio_gpio_bus_destroy(struct device *dev) +static void __devinit mdio_gpio_bus_deinit(struct device *dev) { struct mii_bus *bus = dev_get_drvdata(dev); struct mdio_gpio_info *bitbang = bus->priv; - mdiobus_unregister(bus); - free_mdio_bitbang(bus); dev_set_drvdata(dev, NULL); - gpio_free(bitbang->mdc); gpio_free(bitbang->mdio); + gpio_free(bitbang->mdc); + free_mdio_bitbang(bus); kfree(bitbang); } +static void __devexit mdio_gpio_bus_destroy(struct device *dev) +{ + struct mii_bus *bus = dev_get_drvdata(dev); + + mdiobus_unregister(bus); + mdio_gpio_bus_deinit(dev); +} + static int __devinit mdio_gpio_probe(struct platform_device *pdev) { struct mdio_gpio_platform_data *pdata = pdev->dev.platform_data; + struct mii_bus *new_bus; + int ret; if (!pdata) return -ENODEV; - return mdio_gpio_bus_init(&pdev->dev, pdata, pdev->id); + new_bus = mdio_gpio_bus_init(&pdev->dev, pdata, pdev->id); + if (!new_bus) + return -ENODEV; + + ret = mdiobus_register(new_bus); + if (ret) + mdio_gpio_bus_deinit(&pdev->dev); + + return ret; } static int __devexit mdio_gpio_remove(struct platform_device *pdev) @@ -179,29 +187,12 @@ static int __devexit mdio_gpio_remove(struct platform_device *pdev) } #ifdef CONFIG_OF_GPIO -static void __devinit add_phy(struct mdio_gpio_platform_data *pdata, - struct device_node *np) -{ - const u32 *data; - int len, id, irq; - - data = of_get_property(np, "reg", &len); - if (!data || len != 4) - return; - - id = *data; - pdata->phy_mask &= ~(1 << id); - - irq = of_irq_to_resource(np, 0, NULL); - if (irq) - pdata->irqs[id] = irq; -} static int __devinit mdio_ofgpio_probe(struct of_device *ofdev, const struct of_device_id *match) { - struct device_node *np = NULL; struct mdio_gpio_platform_data *pdata; + struct mii_bus *new_bus; int ret; pdata = kzalloc(sizeof(*pdata), GFP_KERNEL); @@ -215,14 +206,18 @@ static int __devinit mdio_ofgpio_probe(struct of_device *ofdev, ret = of_get_gpio(ofdev->node, 1); if (ret < 0) - goto out_free; + goto out_free; pdata->mdio = ret; - while ((np = of_get_next_child(ofdev->node, np))) - if (!strcmp(np->type, "ethernet-phy")) - add_phy(pdata, np); + new_bus = mdio_gpio_bus_init(&ofdev->dev, pdata, pdata->mdc); + if (!new_bus) + return -ENODEV; - return mdio_gpio_bus_init(&ofdev->dev, pdata, pdata->mdc); + ret = of_mdiobus_register(new_bus, ofdev->node); + if (ret) + mdio_gpio_bus_deinit(&ofdev->dev); + + return ret; out_free: kfree(pdata); -- cgit v1.2.3 From 0d5515894fd5b9e9402ef76e9a7e704fd26e0e5f Mon Sep 17 00:00:00 2001 From: Yi Zou Date: Wed, 22 Jul 2009 14:07:12 +0000 Subject: ixgbe: Enable FCoE offload when DCB is enabled for 82599 Currently, FCoE offload feature is turned on when the kernel config has CONFIG_FCOE or CONFIG_FCOE_MODULE set. However, we really want to turn FCoE offload on when there is FCoE traffic passing and turn it off when it's just LAN traffic. Since FCoE depends on a lossless network provided by DCB, this allows us to have FCoE turned on/off when user turns on DCB using dcbtool. Signed-off-by: Yi Zou Acked-by: Peter P Waskiewicz Jr Signed-off-by: Jeff Kirsher Signed-off-by: David S. Miller --- drivers/net/ixgbe/ixgbe.h | 1 + drivers/net/ixgbe/ixgbe_dcb_nl.c | 24 ++++++++++++++++++++++++ drivers/net/ixgbe/ixgbe_main.c | 16 ++++++---------- 3 files changed, 31 insertions(+), 10 deletions(-) diff --git a/drivers/net/ixgbe/ixgbe.h b/drivers/net/ixgbe/ixgbe.h index cd22323cfd2..1b12c7ba275 100644 --- a/drivers/net/ixgbe/ixgbe.h +++ b/drivers/net/ixgbe/ixgbe.h @@ -327,6 +327,7 @@ struct ixgbe_adapter { #define IXGBE_FLAG_IN_SFP_MOD_TASK (u32)(1 << 25) #define IXGBE_FLAG_FDIR_HASH_CAPABLE (u32)(1 << 26) #define IXGBE_FLAG_FDIR_PERFECT_CAPABLE (u32)(1 << 27) +#define IXGBE_FLAG_FCOE_CAPABLE (u32)(1 << 28) #define IXGBE_FLAG_FCOE_ENABLED (u32)(1 << 29) u32 flags2; diff --git a/drivers/net/ixgbe/ixgbe_dcb_nl.c b/drivers/net/ixgbe/ixgbe_dcb_nl.c index da2c8514b8d..1c726573290 100644 --- a/drivers/net/ixgbe/ixgbe_dcb_nl.c +++ b/drivers/net/ixgbe/ixgbe_dcb_nl.c @@ -139,6 +139,18 @@ static u8 ixgbe_dcbnl_set_state(struct net_device *netdev, u8 state) adapter->flags &= ~IXGBE_FLAG_FDIR_PERFECT_CAPABLE; } adapter->flags |= IXGBE_FLAG_DCB_ENABLED; +#ifdef IXGBE_FCOE + /* Turn on FCoE offload */ + if ((adapter->flags & IXGBE_FLAG_FCOE_CAPABLE) && + (!(adapter->flags & IXGBE_FLAG_FCOE_ENABLED))) { + adapter->flags |= IXGBE_FLAG_FCOE_ENABLED; + adapter->ring_feature[RING_F_FCOE].indices = + IXGBE_FCRETA_SIZE; + netdev->features |= NETIF_F_FCOE_CRC; + netdev->features |= NETIF_F_FSO; + netdev->fcoe_ddp_xid = IXGBE_FCOE_DDP_MAX - 1; + } +#endif /* IXGBE_FCOE */ ixgbe_init_interrupt_scheme(adapter); if (netif_running(netdev)) netdev->netdev_ops->ndo_open(netdev); @@ -156,6 +168,18 @@ static u8 ixgbe_dcbnl_set_state(struct net_device *netdev, u8 state) adapter->flags |= IXGBE_FLAG_RSS_ENABLED; if (adapter->hw.mac.type == ixgbe_mac_82599EB) adapter->flags |= IXGBE_FLAG_FDIR_HASH_CAPABLE; + +#ifdef IXGBE_FCOE + /* Turn off FCoE offload */ + if (adapter->flags & (IXGBE_FLAG_FCOE_CAPABLE | + IXGBE_FLAG_FCOE_ENABLED)) { + adapter->flags &= ~IXGBE_FLAG_FCOE_ENABLED; + adapter->ring_feature[RING_F_FCOE].indices = 0; + netdev->features &= ~NETIF_F_FCOE_CRC; + netdev->features &= ~NETIF_F_FSO; + netdev->fcoe_ddp_xid = 0; + } +#endif /* IXGBE_FCOE */ ixgbe_init_interrupt_scheme(adapter); if (netif_running(netdev)) netdev->netdev_ops->ndo_open(netdev); diff --git a/drivers/net/ixgbe/ixgbe_main.c b/drivers/net/ixgbe/ixgbe_main.c index e3442f47f93..a2119d79ccd 100644 --- a/drivers/net/ixgbe/ixgbe_main.c +++ b/drivers/net/ixgbe/ixgbe_main.c @@ -3806,8 +3806,9 @@ static int __devinit ixgbe_sw_init(struct ixgbe_adapter *adapter) adapter->atr_sample_rate = 20; adapter->fdir_pballoc = 0; #ifdef IXGBE_FCOE - adapter->flags |= IXGBE_FLAG_FCOE_ENABLED; - adapter->ring_feature[RING_F_FCOE].indices = IXGBE_FCRETA_SIZE; + adapter->flags |= IXGBE_FLAG_FCOE_CAPABLE; + adapter->flags &= ~IXGBE_FLAG_FCOE_ENABLED; + adapter->ring_feature[RING_F_FCOE].indices = 0; #endif /* IXGBE_FCOE */ } @@ -5580,16 +5581,11 @@ static int __devinit ixgbe_probe(struct pci_dev *pdev, #endif #ifdef IXGBE_FCOE - if (adapter->flags & IXGBE_FLAG_FCOE_ENABLED) { + if (adapter->flags & IXGBE_FLAG_FCOE_CAPABLE) { if (hw->mac.ops.get_device_caps) { hw->mac.ops.get_device_caps(hw, &device_caps); - if (!(device_caps & IXGBE_DEVICE_CAPS_FCOE_OFFLOADS)) { - netdev->features |= NETIF_F_FCOE_CRC; - netdev->features |= NETIF_F_FSO; - netdev->fcoe_ddp_xid = IXGBE_FCOE_DDP_MAX - 1; - } else { - adapter->flags &= ~IXGBE_FLAG_FCOE_ENABLED; - } + if (device_caps & IXGBE_DEVICE_CAPS_FCOE_OFFLOADS) + adapter->flags &= ~IXGBE_FLAG_FCOE_CAPABLE; } } #endif /* IXGBE_FCOE */ -- cgit v1.2.3 From 601278659d5717b4f7a14fbc9f2b9d559bba6aef Mon Sep 17 00:00:00 2001 From: Lucy Liu Date: Wed, 22 Jul 2009 14:07:33 +0000 Subject: ixgbe: Don't priority tag control frames in DCB mode Certain types of control packets (LLDP, LACP, etc.) are not supposed to have a priority tag or vlan tag inserted. Ixgbe driver is currently priority tagging everything (if packet is not on a VLAN interface). This patch modifies DCB mode, so that packets marked with skb priority TC_PRIO_CONTROL are not priority tagged. It also transmits these packets on the highest priority traffic class. Programs (like dcbd) can set the skb priority using a socket option. Or, a tc filter can be configured to set the priority value. Using the value TC_PRIO_CONTROL (7) has the benefit that it is already defined in the kernel, and the bonding LACP code already sets the skb->priority field to this value. Signed-off-by: Lucy Liu Acked-by: Peter P Waskiewicz Jr Signed-off-by: Jeff Kirsher Signed-off-by: David S. Miller --- drivers/net/ixgbe/ixgbe_main.c | 18 ++++++++++++------ 1 file changed, 12 insertions(+), 6 deletions(-) diff --git a/drivers/net/ixgbe/ixgbe_main.c b/drivers/net/ixgbe/ixgbe_main.c index a2119d79ccd..47a3c6d7056 100644 --- a/drivers/net/ixgbe/ixgbe_main.c +++ b/drivers/net/ixgbe/ixgbe_main.c @@ -34,6 +34,7 @@ #include #include #include +#include #include #include #include @@ -5126,9 +5127,6 @@ static int ixgbe_xmit_frame(struct sk_buff *skb, struct net_device *netdev) int count = 0; unsigned int f; - r_idx = skb->queue_mapping; - tx_ring = &adapter->tx_ring[r_idx]; - if (adapter->vlgrp && vlan_tx_tag_present(skb)) { tx_flags |= vlan_tx_tag_get(skb); if (adapter->flags & IXGBE_FLAG_DCB_ENABLED) { @@ -5138,11 +5136,19 @@ static int ixgbe_xmit_frame(struct sk_buff *skb, struct net_device *netdev) tx_flags <<= IXGBE_TX_FLAGS_VLAN_SHIFT; tx_flags |= IXGBE_TX_FLAGS_VLAN; } else if (adapter->flags & IXGBE_FLAG_DCB_ENABLED) { - tx_flags |= (skb->queue_mapping << 13); - tx_flags <<= IXGBE_TX_FLAGS_VLAN_SHIFT; - tx_flags |= IXGBE_TX_FLAGS_VLAN; + if (skb->priority != TC_PRIO_CONTROL) { + tx_flags |= (skb->queue_mapping << 13); + tx_flags <<= IXGBE_TX_FLAGS_VLAN_SHIFT; + tx_flags |= IXGBE_TX_FLAGS_VLAN; + } else { + skb->queue_mapping = + adapter->ring_feature[RING_F_DCB].indices-1; + } } + r_idx = skb->queue_mapping; + tx_ring = &adapter->tx_ring[r_idx]; + if ((adapter->flags & IXGBE_FLAG_FCOE_ENABLED) && (skb->protocol == htons(ETH_P_FCOE))) tx_flags |= IXGBE_TX_FLAGS_FCOE; -- cgit v1.2.3 From ffafa60d496f80c250f2ae0340ae94434c0b0b4d Mon Sep 17 00:00:00 2001 From: Andy Gospodarek Date: Wed, 22 Jul 2009 09:34:00 +0000 Subject: ixgbe: remove unnecessary call to device_init_wakeup Calls to device_init_wakeup should not be necessary in drivers that use device_set_wakeup_enable since pci_pm_init will set the can_wakeup flag for the device when initialized. Signed-off-by: Andy Gospodarek Acked-by: Peter P Waskiewicz Jr Signed-off-by: David S. Miller --- drivers/net/ixgbe/ixgbe_main.c | 1 - 1 file changed, 1 deletion(-) diff --git a/drivers/net/ixgbe/ixgbe_main.c b/drivers/net/ixgbe/ixgbe_main.c index 47a3c6d7056..68877599f6d 100644 --- a/drivers/net/ixgbe/ixgbe_main.c +++ b/drivers/net/ixgbe/ixgbe_main.c @@ -5640,7 +5640,6 @@ static int __devinit ixgbe_probe(struct pci_dev *pdev, adapter->wol = 0; break; } - device_init_wakeup(&adapter->pdev->dev, true); device_set_wakeup_enable(&adapter->pdev->dev, adapter->wol); /* pick up the PCI bus settings for reporting later */ -- cgit v1.2.3 From 69885683d22d8c05910fd808c01fdce1322739b4 Mon Sep 17 00:00:00 2001 From: Mikulas Patocka Date: Thu, 23 Jul 2009 20:30:37 +0100 Subject: dm raid1: wake kmirrord when requeueing delayed bios after remote recovery The recent commit 7513c2a761d69d2a93f17146b3563527d3618ba0 (dm raid1: add is_remote_recovering hook for clusters) changed do_writes() to update the ms->writes list but forgot to wake up kmirrord to process it. The rule is that when anything is being added on ms->reads, ms->writes or ms->failures and the list was empty before we must call wakeup_mirrord (for immediate processing) or delayed_wake (for delayed processing). Otherwise the bios could sit on the list indefinitely. Signed-off-by: Mikulas Patocka CC: stable@kernel.org Signed-off-by: Alasdair G Kergon --- drivers/md/dm-raid1.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/md/dm-raid1.c b/drivers/md/dm-raid1.c index ce8868c768c..42a3e4341d6 100644 --- a/drivers/md/dm-raid1.c +++ b/drivers/md/dm-raid1.c @@ -638,6 +638,7 @@ static void do_writes(struct mirror_set *ms, struct bio_list *writes) spin_lock_irq(&ms->lock); bio_list_merge(&ms->writes, &requeue); spin_unlock_irq(&ms->lock); + delayed_wake(ms); } /* -- cgit v1.2.3 From a732c207d19e899845ae47139708af898daaf9fd Mon Sep 17 00:00:00 2001 From: Mike Snitzer Date: Thu, 23 Jul 2009 20:30:40 +0100 Subject: dm: remove queue next_ordered workaround for barriers This patch removes DM's bio-based vs request-based conditional setting of next_ordered. For bio-based DM the next_ordered check is no longer a concern (as that check is now in the __make_request path). For request-based DM the default of QUEUE_ORDERED_NONE is now appropriate. bio-based DM was changed to work-around the previously misplaced next_ordered check with this commit: 99360b4c18f7675b50d283301d46d755affe75fd request-based DM does not yet support barriers but reacted to the above bio-based DM change with this commit: 5d67aa2366ccb8257d103d0b43df855605c3c086 The above changes are no longer needed given Neil Brown's recent fix to put the next_ordered check in the __make_request path: db64f680ba4b5c56c4be59f0698000df89ff0281 Signed-off-by: Mike Snitzer Cc: Jun'ichi Nomura Cc: NeilBrown Acked-by: Kiyoshi Ueda Acked-by: Mikulas Patocka Signed-off-by: Alasdair G Kergon --- drivers/md/dm-table.c | 5 ----- drivers/md/dm.c | 10 ---------- drivers/md/dm.h | 1 - 3 files changed, 16 deletions(-) diff --git a/drivers/md/dm-table.c b/drivers/md/dm-table.c index 2cba557d9e6..5d16d06613a 100644 --- a/drivers/md/dm-table.c +++ b/drivers/md/dm-table.c @@ -830,11 +830,6 @@ unsigned dm_table_get_type(struct dm_table *t) return t->type; } -bool dm_table_bio_based(struct dm_table *t) -{ - return dm_table_get_type(t) == DM_TYPE_BIO_BASED; -} - bool dm_table_request_based(struct dm_table *t) { return dm_table_get_type(t) == DM_TYPE_REQUEST_BASED; diff --git a/drivers/md/dm.c b/drivers/md/dm.c index 9acd54a5cff..8a311ea0d44 100644 --- a/drivers/md/dm.c +++ b/drivers/md/dm.c @@ -2203,16 +2203,6 @@ int dm_swap_table(struct mapped_device *md, struct dm_table *table) goto out; } - /* - * It is enought that blk_queue_ordered() is called only once when - * the first bio-based table is bound. - * - * This setting should be moved to alloc_dev() when request-based dm - * supports barrier. - */ - if (!md->map && dm_table_bio_based(table)) - blk_queue_ordered(md->queue, QUEUE_ORDERED_DRAIN, NULL); - __unbind(md); r = __bind(md, table, &limits); diff --git a/drivers/md/dm.h b/drivers/md/dm.h index 23278ae80f0..a7663eba17e 100644 --- a/drivers/md/dm.h +++ b/drivers/md/dm.h @@ -61,7 +61,6 @@ int dm_table_any_congested(struct dm_table *t, int bdi_bits); int dm_table_any_busy_target(struct dm_table *t); int dm_table_set_type(struct dm_table *t); unsigned dm_table_get_type(struct dm_table *t); -bool dm_table_bio_based(struct dm_table *t); bool dm_table_request_based(struct dm_table *t); int dm_table_alloc_md_mempools(struct dm_table *t); void dm_table_free_md_mempools(struct dm_table *t); -- cgit v1.2.3 From 5dea271b6d87bd1d79a59c1d5baac2596a841c37 Mon Sep 17 00:00:00 2001 From: Mike Snitzer Date: Thu, 23 Jul 2009 20:30:42 +0100 Subject: dm table: pass correct dev area size to device_area_is_valid Incorrect device area lengths are being passed to device_area_is_valid(). The regression appeared in 2.6.31-rc1 through commit 754c5fc7ebb417b23601a6222a6005cc2e7f2913. With the dm-stripe target, the size of the target (ti->len) was used instead of the stripe_width (ti->len/#stripes). An example of a consequent incorrect error message is: device-mapper: table: 254:0: sdb too small for target Signed-off-by: Mike Snitzer Signed-off-by: Alasdair G Kergon --- drivers/md/dm-crypt.c | 2 +- drivers/md/dm-delay.c | 4 ++-- drivers/md/dm-linear.c | 2 +- drivers/md/dm-mpath.c | 2 +- drivers/md/dm-raid1.c | 2 +- drivers/md/dm-stripe.c | 7 ++++--- drivers/md/dm-table.c | 10 +++++----- include/linux/device-mapper.h | 4 ++-- 8 files changed, 17 insertions(+), 16 deletions(-) diff --git a/drivers/md/dm-crypt.c b/drivers/md/dm-crypt.c index 529e2ba505c..ed103816401 100644 --- a/drivers/md/dm-crypt.c +++ b/drivers/md/dm-crypt.c @@ -1318,7 +1318,7 @@ static int crypt_iterate_devices(struct dm_target *ti, { struct crypt_config *cc = ti->private; - return fn(ti, cc->dev, cc->start, data); + return fn(ti, cc->dev, cc->start, ti->len, data); } static struct target_type crypt_target = { diff --git a/drivers/md/dm-delay.c b/drivers/md/dm-delay.c index 4e5b843cd4d..ebe7381f47c 100644 --- a/drivers/md/dm-delay.c +++ b/drivers/md/dm-delay.c @@ -324,12 +324,12 @@ static int delay_iterate_devices(struct dm_target *ti, struct delay_c *dc = ti->private; int ret = 0; - ret = fn(ti, dc->dev_read, dc->start_read, data); + ret = fn(ti, dc->dev_read, dc->start_read, ti->len, data); if (ret) goto out; if (dc->dev_write) - ret = fn(ti, dc->dev_write, dc->start_write, data); + ret = fn(ti, dc->dev_write, dc->start_write, ti->len, data); out: return ret; diff --git a/drivers/md/dm-linear.c b/drivers/md/dm-linear.c index 9184b6deb86..82f7d6e6b1e 100644 --- a/drivers/md/dm-linear.c +++ b/drivers/md/dm-linear.c @@ -139,7 +139,7 @@ static int linear_iterate_devices(struct dm_target *ti, { struct linear_c *lc = ti->private; - return fn(ti, lc->dev, lc->start, data); + return fn(ti, lc->dev, lc->start, ti->len, data); } static struct target_type linear_target = { diff --git a/drivers/md/dm-mpath.c b/drivers/md/dm-mpath.c index c70604a2089..6f0d90d4a54 100644 --- a/drivers/md/dm-mpath.c +++ b/drivers/md/dm-mpath.c @@ -1453,7 +1453,7 @@ static int multipath_iterate_devices(struct dm_target *ti, list_for_each_entry(pg, &m->priority_groups, list) { list_for_each_entry(p, &pg->pgpaths, list) { - ret = fn(ti, p->path.dev, ti->begin, data); + ret = fn(ti, p->path.dev, ti->begin, ti->len, data); if (ret) goto out; } diff --git a/drivers/md/dm-raid1.c b/drivers/md/dm-raid1.c index 42a3e4341d6..9726577cde4 100644 --- a/drivers/md/dm-raid1.c +++ b/drivers/md/dm-raid1.c @@ -1293,7 +1293,7 @@ static int mirror_iterate_devices(struct dm_target *ti, for (i = 0; !ret && i < ms->nr_mirrors; i++) ret = fn(ti, ms->mirror[i].dev, - ms->mirror[i].offset, data); + ms->mirror[i].offset, ti->len, data); return ret; } diff --git a/drivers/md/dm-stripe.c b/drivers/md/dm-stripe.c index b240e85ae39..4e0e5937e42 100644 --- a/drivers/md/dm-stripe.c +++ b/drivers/md/dm-stripe.c @@ -320,10 +320,11 @@ static int stripe_iterate_devices(struct dm_target *ti, int ret = 0; unsigned i = 0; - do + do { ret = fn(ti, sc->stripe[i].dev, - sc->stripe[i].physical_start, data); - while (!ret && ++i < sc->stripes); + sc->stripe[i].physical_start, + sc->stripe_width, data); + } while (!ret && ++i < sc->stripes); return ret; } diff --git a/drivers/md/dm-table.c b/drivers/md/dm-table.c index 5d16d06613a..d952b344191 100644 --- a/drivers/md/dm-table.c +++ b/drivers/md/dm-table.c @@ -346,7 +346,7 @@ static void close_dev(struct dm_dev_internal *d, struct mapped_device *md) * If possible, this checks an area of a destination device is valid. */ static int device_area_is_valid(struct dm_target *ti, struct dm_dev *dev, - sector_t start, void *data) + sector_t start, sector_t len, void *data) { struct queue_limits *limits = data; struct block_device *bdev = dev->bdev; @@ -359,7 +359,7 @@ static int device_area_is_valid(struct dm_target *ti, struct dm_dev *dev, if (!dev_size) return 1; - if ((start >= dev_size) || (start + ti->len > dev_size)) { + if ((start >= dev_size) || (start + len > dev_size)) { DMWARN("%s: %s too small for target", dm_device_name(ti->table->md), bdevname(bdev, b)); return 0; @@ -377,11 +377,11 @@ static int device_area_is_valid(struct dm_target *ti, struct dm_dev *dev, return 0; } - if (ti->len & (logical_block_size_sectors - 1)) { + if (len & (logical_block_size_sectors - 1)) { DMWARN("%s: len=%llu not aligned to h/w " "logical block size %hu of %s", dm_device_name(ti->table->md), - (unsigned long long)ti->len, + (unsigned long long)len, limits->logical_block_size, bdevname(bdev, b)); return 0; } @@ -482,7 +482,7 @@ static int __table_get_device(struct dm_table *t, struct dm_target *ti, #define min_not_zero(l, r) (l == 0) ? r : ((r == 0) ? l : min(l, r)) int dm_set_device_limits(struct dm_target *ti, struct dm_dev *dev, - sector_t start, void *data) + sector_t start, sector_t len, void *data) { struct queue_limits *limits = data; struct block_device *bdev = dev->bdev; diff --git a/include/linux/device-mapper.h b/include/linux/device-mapper.h index 0d6310657f3..655e7721580 100644 --- a/include/linux/device-mapper.h +++ b/include/linux/device-mapper.h @@ -84,7 +84,7 @@ typedef int (*dm_merge_fn) (struct dm_target *ti, struct bvec_merge_data *bvm, typedef int (*iterate_devices_callout_fn) (struct dm_target *ti, struct dm_dev *dev, - sector_t physical_start, + sector_t start, sector_t len, void *data); typedef int (*dm_iterate_devices_fn) (struct dm_target *ti, @@ -104,7 +104,7 @@ void dm_error(const char *message); * Combine device limits. */ int dm_set_device_limits(struct dm_target *ti, struct dm_dev *dev, - sector_t start, void *data); + sector_t start, sector_t len, void *data); struct dm_dev { struct block_device *bdev; -- cgit v1.2.3 From 4fef5f90edc80aae92efec049750de93be9e25cb Mon Sep 17 00:00:00 2001 From: Santosh Shilimkar Date: Wed, 1 Jul 2009 20:20:23 +0530 Subject: OMAP4: sDMA: Update the request lines and new registers. This patch updates the platform dma.h with new dma request lines for OMAP4 peripherals. Also additional hardware register of OMAP4 sDMA module are included. Signed-off-by: Santosh Shilimkar Signed-off-by: Tony Lindgren --- arch/arm/plat-omap/include/mach/dma.h | 88 +++++++++++++++++++++++++++++++++++ 1 file changed, 88 insertions(+) diff --git a/arch/arm/plat-omap/include/mach/dma.h b/arch/arm/plat-omap/include/mach/dma.h index 7b939cc0196..72f680b7180 100644 --- a/arch/arm/plat-omap/include/mach/dma.h +++ b/arch/arm/plat-omap/include/mach/dma.h @@ -122,6 +122,11 @@ #define OMAP_DMA4_CCFN(n) (0x60 * (n) + 0xc0) #define OMAP_DMA4_COLOR(n) (0x60 * (n) + 0xc4) +/* Additional registers available on OMAP4 */ +#define OMAP_DMA4_CDP(n) (0x60 * (n) + 0xd0) +#define OMAP_DMA4_CNDP(n) (0x60 * (n) + 0xd4) +#define OMAP_DMA4_CCDN(n) (0x60 * (n) + 0xd8) + /* Dummy defines to keep multi-omap compiles happy */ #define OMAP1_DMA_REVISION 0 #define OMAP1_DMA_IRQSTATUS_L0 0 @@ -311,6 +316,89 @@ #define OMAP34XX_DMA_USIM_TX 79 /* S_DMA_78 */ #define OMAP34XX_DMA_USIM_RX 80 /* S_DMA_79 */ +/* DMA request lines for 44xx */ +#define OMAP44XX_DMA_DSS_DISPC_REQ 6 /* S_DMA_5 */ +#define OMAP44XX_DMA_SYS_REQ2 7 /* S_DMA_6 */ +#define OMAP44XX_DMA_ISS_REQ1 9 /* S_DMA_8 */ +#define OMAP44XX_DMA_ISS_REQ2 10 /* S_DMA_9 */ +#define OMAP44XX_DMA_ISS_REQ3 12 /* S_DMA_11 */ +#define OMAP44XX_DMA_ISS_REQ4 13 /* S_DMA_12 */ +#define OMAP44XX_DMA_DSS_RFBI_REQ 14 /* S_DMA_13 */ +#define OMAP44XX_DMA_SPI3_TX0 15 /* S_DMA_14 */ +#define OMAP44XX_DMA_SPI3_RX0 16 /* S_DMA_15 */ +#define OMAP44XX_DMA_MCBSP2_TX 17 /* S_DMA_16 */ +#define OMAP44XX_DMA_MCBSP2_RX 18 /* S_DMA_17 */ +#define OMAP44XX_DMA_MCBSP3_TX 19 /* S_DMA_18 */ +#define OMAP44XX_DMA_MCBSP3_RX 20 /* S_DMA_19 */ +#define OMAP44XX_DMA_SPI3_TX1 23 /* S_DMA_22 */ +#define OMAP44XX_DMA_SPI3_RX1 24 /* S_DMA_23 */ +#define OMAP44XX_DMA_I2C3_TX 25 /* S_DMA_24 */ +#define OMAP44XX_DMA_I2C3_RX 26 /* S_DMA_25 */ +#define OMAP44XX_DMA_I2C1_TX 27 /* S_DMA_26 */ +#define OMAP44XX_DMA_I2C1_RX 28 /* S_DMA_27 */ +#define OMAP44XX_DMA_I2C2_TX 29 /* S_DMA_28 */ +#define OMAP44XX_DMA_I2C2_RX 30 /* S_DMA_29 */ +#define OMAP44XX_DMA_MCBSP4_TX 31 /* S_DMA_30 */ +#define OMAP44XX_DMA_MCBSP4_RX 32 /* S_DMA_31 */ +#define OMAP44XX_DMA_MCBSP1_TX 33 /* S_DMA_32 */ +#define OMAP44XX_DMA_MCBSP1_RX 34 /* S_DMA_33 */ +#define OMAP44XX_DMA_SPI1_TX0 35 /* S_DMA_34 */ +#define OMAP44XX_DMA_SPI1_RX0 36 /* S_DMA_35 */ +#define OMAP44XX_DMA_SPI1_TX1 37 /* S_DMA_36 */ +#define OMAP44XX_DMA_SPI1_RX1 38 /* S_DMA_37 */ +#define OMAP44XX_DMA_SPI1_TX2 39 /* S_DMA_38 */ +#define OMAP44XX_DMA_SPI1_RX2 40 /* S_DMA_39 */ +#define OMAP44XX_DMA_SPI1_TX3 41 /* S_DMA_40 */ +#define OMAP44XX_DMA_SPI1_RX3 42 /* S_DMA_41 */ +#define OMAP44XX_DMA_SPI2_TX0 43 /* S_DMA_42 */ +#define OMAP44XX_DMA_SPI2_RX0 44 /* S_DMA_43 */ +#define OMAP44XX_DMA_SPI2_TX1 45 /* S_DMA_44 */ +#define OMAP44XX_DMA_SPI2_RX1 46 /* S_DMA_45 */ +#define OMAP44XX_DMA_MMC2_TX 47 /* S_DMA_46 */ +#define OMAP44XX_DMA_MMC2_RX 48 /* S_DMA_47 */ +#define OMAP44XX_DMA_UART1_TX 49 /* S_DMA_48 */ +#define OMAP44XX_DMA_UART1_RX 50 /* S_DMA_49 */ +#define OMAP44XX_DMA_UART2_TX 51 /* S_DMA_50 */ +#define OMAP44XX_DMA_UART2_RX 52 /* S_DMA_51 */ +#define OMAP44XX_DMA_UART3_TX 53 /* S_DMA_52 */ +#define OMAP44XX_DMA_UART3_RX 54 /* S_DMA_53 */ +#define OMAP44XX_DMA_UART4_TX 55 /* S_DMA_54 */ +#define OMAP44XX_DMA_UART4_RX 56 /* S_DMA_55 */ +#define OMAP44XX_DMA_MMC4_TX 57 /* S_DMA_56 */ +#define OMAP44XX_DMA_MMC4_RX 58 /* S_DMA_57 */ +#define OMAP44XX_DMA_MMC5_TX 59 /* S_DMA_58 */ +#define OMAP44XX_DMA_MMC5_RX 60 /* S_DMA_59 */ +#define OMAP44XX_DMA_MMC1_TX 61 /* S_DMA_60 */ +#define OMAP44XX_DMA_MMC1_RX 62 /* S_DMA_61 */ +#define OMAP44XX_DMA_SYS_REQ3 64 /* S_DMA_63 */ +#define OMAP44XX_DMA_MCPDM_UP 65 /* S_DMA_64 */ +#define OMAP44XX_DMA_MCPDM_DL 66 /* S_DMA_65 */ +#define OMAP44XX_DMA_SPI4_TX0 70 /* S_DMA_69 */ +#define OMAP44XX_DMA_SPI4_RX0 71 /* S_DMA_70 */ +#define OMAP44XX_DMA_DSS_DSI1_REQ0 72 /* S_DMA_71 */ +#define OMAP44XX_DMA_DSS_DSI1_REQ1 73 /* S_DMA_72 */ +#define OMAP44XX_DMA_DSS_DSI1_REQ2 74 /* S_DMA_73 */ +#define OMAP44XX_DMA_DSS_DSI1_REQ3 75 /* S_DMA_74 */ +#define OMAP44XX_DMA_DSS_HDMI_REQ 76 /* S_DMA_75 */ +#define OMAP44XX_DMA_MMC3_TX 77 /* S_DMA_76 */ +#define OMAP44XX_DMA_MMC3_RX 78 /* S_DMA_77 */ +#define OMAP44XX_DMA_USIM_TX 79 /* S_DMA_78 */ +#define OMAP44XX_DMA_USIM_RX 80 /* S_DMA_79 */ +#define OMAP44XX_DMA_DSS_DSI2_REQ0 81 /* S_DMA_80 */ +#define OMAP44XX_DMA_DSS_DSI2_REQ1 82 /* S_DMA_81 */ +#define OMAP44XX_DMA_DSS_DSI2_REQ2 83 /* S_DMA_82 */ +#define OMAP44XX_DMA_DSS_DSI2_REQ3 84 /* S_DMA_83 */ +#define OMAP44XX_DMA_ABE_REQ0 101 /* S_DMA_100 */ +#define OMAP44XX_DMA_ABE_REQ1 102 /* S_DMA_101 */ +#define OMAP44XX_DMA_ABE_REQ2 103 /* S_DMA_102 */ +#define OMAP44XX_DMA_ABE_REQ3 104 /* S_DMA_103 */ +#define OMAP44XX_DMA_ABE_REQ4 105 /* S_DMA_104 */ +#define OMAP44XX_DMA_ABE_REQ5 106 /* S_DMA_105 */ +#define OMAP44XX_DMA_ABE_REQ6 107 /* S_DMA_106 */ +#define OMAP44XX_DMA_ABE_REQ7 108 /* S_DMA_107 */ +#define OMAP44XX_DMA_I2C4_TX 124 /* S_DMA_123 */ +#define OMAP44XX_DMA_I2C4_RX 125 /* S_DMA_124 */ + /*----------------------------------------------------------------------------*/ /* Hardware registers for LCD DMA */ -- cgit v1.2.3 From d6c585a4342a2ff627a29f9aea77c5ed4cd76023 Mon Sep 17 00:00:00 2001 From: Thomas Gleixner Date: Fri, 24 Jul 2009 08:34:59 +0200 Subject: x86: geode: Mark mfgpt irq IRQF_TIMER to prevent resume failure Timer interrupts are excluded from being disabled during suspend. The clock events code manages the disabling of clock events on its own because the timer interrupt needs to be functional before the resume code reenables the device interrupts. The mfgpt timer request its interrupt without setting the IRQF_TIMER flag so suspend_device_irqs() disables it as well which results in a fatal resume failure. Adding IRQF_TIMER to the interupt flags when requesting the mrgpt timer interrupt solves the problem. Signed-off-by: Thomas Gleixner LKML-Reference: Cc: Andres Salomon Cc: stable@kernel.org --- arch/x86/kernel/mfgpt_32.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/x86/kernel/mfgpt_32.c b/arch/x86/kernel/mfgpt_32.c index 846510b78a0..2a62d843f01 100644 --- a/arch/x86/kernel/mfgpt_32.c +++ b/arch/x86/kernel/mfgpt_32.c @@ -347,7 +347,7 @@ static irqreturn_t mfgpt_tick(int irq, void *dev_id) static struct irqaction mfgptirq = { .handler = mfgpt_tick, - .flags = IRQF_DISABLED | IRQF_NOBALANCING, + .flags = IRQF_DISABLED | IRQF_NOBALANCING | IRQF_TIMER, .name = "mfgpt-timer" }; -- cgit v1.2.3 From 5f954c3426190f7ae432a09abd62164d5d14c709 Mon Sep 17 00:00:00 2001 From: Heiko Carstens Date: Fri, 24 Jul 2009 12:39:49 +0200 Subject: [S390] hibernation: fix lowcore handling Our swsusp_arch_suspend() backend implementation disables prefixing by setting the contents of the prefix register to 0. However afterwards common code functions are called which might access percpu data structures. Since the lowcore contains e.g. the percpu base pointer this isn't a good idea. So fix this by copying the hibernating cpu's lowcore to absolute address zero. Signed-off-by: Heiko Carstens Signed-off-by: Martin Schwidefsky --- arch/s390/kernel/early.c | 4 ++-- arch/s390/power/swsusp_asm64.S | 13 ++++++++----- 2 files changed, 10 insertions(+), 7 deletions(-) diff --git a/arch/s390/kernel/early.c b/arch/s390/kernel/early.c index f9b144049dc..8d15314381e 100644 --- a/arch/s390/kernel/early.c +++ b/arch/s390/kernel/early.c @@ -210,7 +210,7 @@ static noinline __init void detect_machine_type(void) machine_flags |= MACHINE_FLAG_VM; } -static void early_pgm_check_handler(void) +static __init void early_pgm_check_handler(void) { unsigned long addr; const struct exception_table_entry *fixup; @@ -222,7 +222,7 @@ static void early_pgm_check_handler(void) S390_lowcore.program_old_psw.addr = fixup->fixup | PSW_ADDR_AMODE; } -void setup_lowcore_early(void) +static noinline __init void setup_lowcore_early(void) { psw_t psw; diff --git a/arch/s390/power/swsusp_asm64.S b/arch/s390/power/swsusp_asm64.S index 76d688da32f..e27bd316489 100644 --- a/arch/s390/power/swsusp_asm64.S +++ b/arch/s390/power/swsusp_asm64.S @@ -40,11 +40,11 @@ swsusp_arch_suspend: /* Store prefix register on stack */ stpx __SF_EMPTY(%r15) - /* Setup base register for lowcore (absolute 0) */ - llgf %r1,__SF_EMPTY(%r15) + /* Save prefix register contents for lowcore */ + llgf %r4,__SF_EMPTY(%r15) /* Get pointer to save area */ - aghi %r1,0x1000 + lghi %r1,0x1000 /* Store registers */ mvc 0x318(4,%r1),__SF_EMPTY(%r15) /* move prefix to lowcore */ @@ -79,8 +79,11 @@ swsusp_arch_suspend: xc __SF_EMPTY(4,%r15),__SF_EMPTY(%r15) spx __SF_EMPTY(%r15) - /* Setup lowcore */ - brasl %r14,setup_lowcore_early + lghi %r2,0 + lghi %r3,2*PAGE_SIZE + lghi %r5,2*PAGE_SIZE +1: mvcle %r2,%r4,0 + jo 1b /* Save image */ brasl %r14,swsusp_save -- cgit v1.2.3 From c63b196afcf22405527abe4c2c57926a5bbd6fc9 Mon Sep 17 00:00:00 2001 From: Heiko Carstens Date: Fri, 24 Jul 2009 12:39:50 +0200 Subject: [S390] hibernation: fix register corruption on machine checks swsusp_arch_suspend() actually saves all cpu register contents on hibernation. Machine checks must be disabled since swsusp_arch_suspend() stores register contents to their lowcore save areas. That's the same place where register contents on machine checks would be saved. To avoid register corruption disable machine checks. We must also disable machine checks in the new psw mask for program checks, since swsusp_arch_suspend() may generate program checks. Signed-off-by: Heiko Carstens Signed-off-by: Martin Schwidefsky --- arch/s390/power/swsusp.c | 36 ++++++++++++++++++++++++------------ arch/s390/power/swsusp_asm64.S | 22 +--------------------- 2 files changed, 25 insertions(+), 33 deletions(-) diff --git a/arch/s390/power/swsusp.c b/arch/s390/power/swsusp.c index e6a4fe9f5f2..bd1f5c6b0b8 100644 --- a/arch/s390/power/swsusp.c +++ b/arch/s390/power/swsusp.c @@ -7,24 +7,36 @@ * */ +#include -/* - * save CPU registers before creating a hibernation image and before - * restoring the memory state from it - */ void save_processor_state(void) { - /* implentation contained in the - * swsusp_arch_suspend function + /* swsusp_arch_suspend() actually saves all cpu register contents. + * Machine checks must be disabled since swsusp_arch_suspend() stores + * register contents to their lowcore save areas. That's the same + * place where register contents on machine checks would be saved. + * To avoid register corruption disable machine checks. + * We must also disable machine checks in the new psw mask for + * program checks, since swsusp_arch_suspend() may generate program + * checks. Disabling machine checks for all other new psw masks is + * just paranoia. */ + local_mcck_disable(); + /* Disable lowcore protection */ + __ctl_clear_bit(0,28); + S390_lowcore.external_new_psw.mask &= ~PSW_MASK_MCHECK; + S390_lowcore.svc_new_psw.mask &= ~PSW_MASK_MCHECK; + S390_lowcore.io_new_psw.mask &= ~PSW_MASK_MCHECK; + S390_lowcore.program_new_psw.mask &= ~PSW_MASK_MCHECK; } -/* - * restore the contents of CPU registers - */ void restore_processor_state(void) { - /* implentation contained in the - * swsusp_arch_resume function - */ + S390_lowcore.external_new_psw.mask |= PSW_MASK_MCHECK; + S390_lowcore.svc_new_psw.mask |= PSW_MASK_MCHECK; + S390_lowcore.io_new_psw.mask |= PSW_MASK_MCHECK; + S390_lowcore.program_new_psw.mask |= PSW_MASK_MCHECK; + /* Enable lowcore protection */ + __ctl_set_bit(0,28); + local_mcck_enable(); } diff --git a/arch/s390/power/swsusp_asm64.S b/arch/s390/power/swsusp_asm64.S index e27bd316489..b26df5c5933 100644 --- a/arch/s390/power/swsusp_asm64.S +++ b/arch/s390/power/swsusp_asm64.S @@ -32,11 +32,6 @@ swsusp_arch_suspend: /* Deactivate DAT */ stnsm __SF_EMPTY(%r15),0xfb - /* Switch off lowcore protection */ - stctg %c0,%c0,__SF_EMPTY(%r15) - ni __SF_EMPTY+4(%r15),0xef - lctlg %c0,%c0,__SF_EMPTY(%r15) - /* Store prefix register on stack */ stpx __SF_EMPTY(%r15) @@ -88,11 +83,6 @@ swsusp_arch_suspend: /* Save image */ brasl %r14,swsusp_save - /* Switch on lowcore protection */ - stctg %c0,%c0,__SF_EMPTY(%r15) - oi __SF_EMPTY+4(%r15),0x10 - lctlg %c0,%c0,__SF_EMPTY(%r15) - /* Restore prefix register and return */ lghi %r1,0x1000 spx 0x318(%r1) @@ -120,11 +110,6 @@ swsusp_arch_resume: /* Deactivate DAT */ stnsm __SF_EMPTY(%r15),0xfb - /* Switch off lowcore protection */ - stctg %c0,%c0,__SF_EMPTY(%r15) - ni __SF_EMPTY+4(%r15),0xef - lctlg %c0,%c0,__SF_EMPTY(%r15) - /* Set prefix page to zero */ xc __SF_EMPTY(4,%r15),__SF_EMPTY(%r15) spx __SF_EMPTY(%r15) @@ -178,7 +163,7 @@ swsusp_arch_resume: /* Load old stack */ lg %r15,0x2f8(%r13) - /* Pointer to save arae */ + /* Pointer to save area */ lghi %r13,0x1000 #ifdef CONFIG_SMP @@ -190,11 +175,6 @@ swsusp_arch_resume: /* Restore prefix register */ spx 0x318(%r13) - /* Switch on lowcore protection */ - stctg %c0,%c0,__SF_EMPTY(%r15) - oi __SF_EMPTY+4(%r15),0x10 - lctlg %c0,%c0,__SF_EMPTY(%r15) - /* Activate DAT */ stosm __SF_EMPTY(%r15),0x04 -- cgit v1.2.3 From 3a6ba4600d6fb913ddb0dd08843ad75405795883 Mon Sep 17 00:00:00 2001 From: Heiko Carstens Date: Fri, 24 Jul 2009 12:39:51 +0200 Subject: [S390] vdso: fix per cpu area allocation vdso per cpu area allocation in smp_prepare_cpus() happens with GFP_KERNEL but irqs disabled. Triggers this one: Badness at kernel/lockdep.c:2280 Modules linked in: CPU: 0 Not tainted 2.6.30 #2 Process swapper (pid: 1, task: 000000003fe88000, ksp: 000000003fe87eb8) Krnl PSW : 0400c00180000000 0000000000083360 (lockdep_trace_alloc+0xec/0xf8) [...] Call Trace: ([<00000000000832b6>] lockdep_trace_alloc+0x42/0xf8) [<00000000000b1880>] __alloc_pages_internal+0x3e8/0x5c4 [<00000000000b1b4a>] __get_free_pages+0x3a/0xb0 [<0000000000026546>] vdso_alloc_per_cpu+0x6a/0x18c [<00000000005eff82>] smp_prepare_cpus+0x322/0x594 [<00000000005e8232>] kernel_init+0x76/0x398 [<000000000001bb1e>] kernel_thread_starter+0x6/0xc [<000000000001bb18>] kernel_thread_starter+0x0/0xc Fix this by moving the allocation out of the irqs disabled section. Reported-by: Christian Borntraeger Signed-off-by: Heiko Carstens Signed-off-by: Martin Schwidefsky --- arch/s390/kernel/smp.c | 7 ++++--- 1 file changed, 4 insertions(+), 3 deletions(-) diff --git a/arch/s390/kernel/smp.c b/arch/s390/kernel/smp.c index 2270730f535..be2cae08340 100644 --- a/arch/s390/kernel/smp.c +++ b/arch/s390/kernel/smp.c @@ -687,13 +687,14 @@ void __init smp_prepare_cpus(unsigned int max_cpus) #ifndef CONFIG_64BIT if (MACHINE_HAS_IEEE) lowcore->extended_save_area_addr = (u32) save_area; -#else - if (vdso_alloc_per_cpu(smp_processor_id(), lowcore)) - BUG(); #endif set_prefix((u32)(unsigned long) lowcore); local_mcck_enable(); local_irq_enable(); +#ifdef CONFIG_64BIT + if (vdso_alloc_per_cpu(smp_processor_id(), &S390_lowcore)) + BUG(); +#endif for_each_possible_cpu(cpu) if (cpu != smp_processor_id()) smp_create_idle(cpu); -- cgit v1.2.3 From 1277580fe5dfb5aef84854bdb7983657df00b920 Mon Sep 17 00:00:00 2001 From: Martin Schwidefsky Date: Fri, 24 Jul 2009 12:39:52 +0200 Subject: [S390] vdso: clock_gettime of CLOCK_THREAD_CPUTIME_ID with noexec=on The combination of noexec=on and a clock_gettime call with clock id CLOCK_THREAD_CPUTIME_ID is broken. The vdso code switches to the access register mode to get access to the per-cpu data structure to execute the magic ectg instruction. After the ectg instruction the code always switches back to the primary mode but for noexec=on the correct mode is the secondary mode. The effect of the bug is that the user space program looses the access to all mappings without PROT_EXEC, e.g. the stack. The problem is fixed by restoring the mode that has been active before the switch to the access register mode. Signed-off-by: Martin Schwidefsky --- arch/s390/kernel/vdso64/clock_gettime.S | 11 +++++++++-- 1 file changed, 9 insertions(+), 2 deletions(-) diff --git a/arch/s390/kernel/vdso64/clock_gettime.S b/arch/s390/kernel/vdso64/clock_gettime.S index 79dbfee831e..49106c6e6f8 100644 --- a/arch/s390/kernel/vdso64/clock_gettime.S +++ b/arch/s390/kernel/vdso64/clock_gettime.S @@ -88,10 +88,17 @@ __kernel_clock_gettime: llilh %r4,0x0100 sar %a4,%r4 lghi %r4,0 + epsw %r5,0 sacf 512 /* Magic ectg instruction */ .insn ssf,0xc80100000000,__VDSO_ECTG_BASE(4),__VDSO_ECTG_USER(4),4 - sacf 0 - sar %a4,%r2 + tml %r5,0x4000 + jo 11f + tml %r5,0x8000 + jno 10f + sacf 256 + j 11f +10: sacf 0 +11: sar %a4,%r2 algr %r1,%r0 /* r1 = cputime as TOD value */ mghi %r1,1000 /* convert to nanoseconds */ srlg %r1,%r1,12 /* r1 = cputime in nanosec */ -- cgit v1.2.3 From 8d406c6de2e67b5bae3c43b62b492c4ff63afb92 Mon Sep 17 00:00:00 2001 From: Felix Beck Date: Fri, 24 Jul 2009 12:39:53 +0200 Subject: [S390] zcrypt: fix scheduling of hrtimer ap_poll_timer Every time a request is enqueued or there is some work outstanding from the ap_tasklet, the ap_poll_timer is scheduled again. Unfortunately it was permanently called. It looked as if it was started in the past and thus imediately expired. This has been changed. First it is checked if the hrtimer is already expired. Then the expiring time is forwarded and the timer restarted. Signed-off-by: Felix Beck Signed-off-by: Martin Schwidefsky --- drivers/s390/crypto/ap_bus.c | 9 +++++++-- 1 file changed, 7 insertions(+), 2 deletions(-) diff --git a/drivers/s390/crypto/ap_bus.c b/drivers/s390/crypto/ap_bus.c index 727a809636d..ed3dcdea7fe 100644 --- a/drivers/s390/crypto/ap_bus.c +++ b/drivers/s390/crypto/ap_bus.c @@ -1145,12 +1145,17 @@ ap_config_timeout(unsigned long ptr) */ static inline void ap_schedule_poll_timer(void) { + ktime_t hr_time; if (ap_using_interrupts() || ap_suspend_flag) return; if (hrtimer_is_queued(&ap_poll_timer)) return; - hrtimer_start(&ap_poll_timer, ktime_set(0, poll_timeout), - HRTIMER_MODE_ABS); + if (ktime_to_ns(hrtimer_expires_remaining(&ap_poll_timer)) <= 0) { + hr_time = ktime_set(0, poll_timeout); + hrtimer_forward_now(&ap_poll_timer, hr_time); + hrtimer_restart(&ap_poll_timer); + } + return; } /** -- cgit v1.2.3 From 88987ef91b99cf99bc5d167caeb31d4958fbf931 Mon Sep 17 00:00:00 2001 From: Catalin Marinas Date: Fri, 24 Jul 2009 12:32:52 +0100 Subject: Thumb-2: Add some .align statements to the .S files Since the Thumb-2 instructions can be 16-bit wide, data in the .text sections may not be aligned to a 32-bit word and this leads to unaligned exceptions. This patch does not affect the ARM code generation. Signed-off-by: Catalin Marinas --- arch/arm/boot/compressed/head.S | 3 +++ arch/arm/kernel/entry-armv.S | 4 ++++ arch/arm/kernel/head-common.S | 2 ++ arch/arm/lib/sha1.S | 2 ++ arch/arm/vfp/entry.S | 2 ++ 5 files changed, 13 insertions(+) diff --git a/arch/arm/boot/compressed/head.S b/arch/arm/boot/compressed/head.S index 4515728c534..82f5fcfd956 100644 --- a/arch/arm/boot/compressed/head.S +++ b/arch/arm/boot/compressed/head.S @@ -291,6 +291,7 @@ wont_overwrite: mov r0, r4 bl decompress_kernel b call_kernel + .align 2 .type LC0, #object LC0: .word LC0 @ r1 .word __bss_start @ r2 @@ -589,6 +590,7 @@ call_cache_fn: adr r12, proc_types * methods. Writeback caches _must_ have the flush method * defined. */ + .align 2 .type proc_types,#object proc_types: .word 0x41560600 @ ARM6/610 @@ -945,6 +947,7 @@ __armv3_mpu_cache_flush: * memory, which again must be relocatable. */ #ifdef DEBUG + .align 2 .type phexbuf,#object phexbuf: .space 12 .size phexbuf, . - phexbuf diff --git a/arch/arm/kernel/entry-armv.S b/arch/arm/kernel/entry-armv.S index fc8af43c500..0befd1cabf4 100644 --- a/arch/arm/kernel/entry-armv.S +++ b/arch/arm/kernel/entry-armv.S @@ -1065,6 +1065,10 @@ vector_\name: ldr lr, [pc, lr, lsl #2] movs pc, lr @ branch to handler in SVC mode ENDPROC(vector_\name) + + .align 2 + @ handler addresses follow this label +1: .endm .globl __stubs_start diff --git a/arch/arm/kernel/head-common.S b/arch/arm/kernel/head-common.S index 991952c644d..dbfaef07a1f 100644 --- a/arch/arm/kernel/head-common.S +++ b/arch/arm/kernel/head-common.S @@ -14,6 +14,7 @@ #define ATAG_CORE 0x54410001 #define ATAG_CORE_SIZE ((2*4 + 3*4) >> 2) + .align 2 .type __switch_data, %object __switch_data: .long __mmap_switched @@ -185,6 +186,7 @@ ENDPROC(lookup_processor_type) * Look in and arch/arm/kernel/arch.[ch] for * more information about the __proc_info and __arch_info structures. */ + .align 2 .long __proc_info_begin .long __proc_info_end 3: .long . diff --git a/arch/arm/lib/sha1.S b/arch/arm/lib/sha1.S index a16fb208c84..09b548cac1a 100644 --- a/arch/arm/lib/sha1.S +++ b/arch/arm/lib/sha1.S @@ -187,6 +187,7 @@ ENTRY(sha_transform) ENDPROC(sha_transform) + .align 2 .L_sha_K: .word 0x5a827999, 0x6ed9eba1, 0x8f1bbcdc, 0xca62c1d6 @@ -195,6 +196,7 @@ ENDPROC(sha_transform) * void sha_init(__u32 *buf) */ + .align 2 .L_sha_initial_digest: .word 0x67452301, 0xefcdab89, 0x98badcfe, 0x10325476, 0xc3d2e1f0 diff --git a/arch/arm/vfp/entry.S b/arch/arm/vfp/entry.S index a2bed62aec2..4fa9903b83c 100644 --- a/arch/arm/vfp/entry.S +++ b/arch/arm/vfp/entry.S @@ -42,6 +42,7 @@ ENTRY(vfp_null_entry) mov pc, lr ENDPROC(vfp_null_entry) + .align 2 .LCvfp: .word vfp_vector @@ -61,6 +62,7 @@ ENTRY(vfp_testing_entry) mov pc, r9 @ we have handled the fault ENDPROC(vfp_testing_entry) + .align 2 VFP_arch_address: .word VFP_arch -- cgit v1.2.3 From 0becb088501886f37ade38762c8eaaf4263572cc Mon Sep 17 00:00:00 2001 From: Catalin Marinas Date: Fri, 24 Jul 2009 12:32:53 +0100 Subject: Thumb-2: Add macros for the unified assembler syntax This patch adds various C and assembler macros that help with using the unified assembler syntax for compiling files to either ARM or Thumb-2 modes. Signed-off-by: Catalin Marinas --- arch/arm/Kconfig | 3 + arch/arm/Makefile | 2 +- arch/arm/include/asm/unified.h | 126 +++++++++++++++++++++++++++++++++++++++++ 3 files changed, 130 insertions(+), 1 deletion(-) create mode 100644 arch/arm/include/asm/unified.h diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index aef63c8e3d2..da28e7ba608 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -983,6 +983,9 @@ config HZ default AT91_TIMER_HZ if ARCH_AT91 default 100 +config ARM_ASM_UNIFIED + bool + config AEABI bool "Use the ARM EABI to compile the kernel" help diff --git a/arch/arm/Makefile b/arch/arm/Makefile index c877d6df23d..3505572a21e 100644 --- a/arch/arm/Makefile +++ b/arch/arm/Makefile @@ -95,7 +95,7 @@ endif # Need -Uarm for gcc < 3.x KBUILD_CFLAGS +=$(CFLAGS_ABI) $(arch-y) $(tune-y) $(call cc-option,-mshort-load-bytes,$(call cc-option,-malignment-traps,)) -msoft-float -Uarm -KBUILD_AFLAGS +=$(CFLAGS_ABI) $(arch-y) $(tune-y) -msoft-float +KBUILD_AFLAGS +=$(CFLAGS_ABI) $(arch-y) $(tune-y) -include asm/unified.h -msoft-float CHECKFLAGS += -D__arm__ diff --git a/arch/arm/include/asm/unified.h b/arch/arm/include/asm/unified.h new file mode 100644 index 00000000000..073e85b9b96 --- /dev/null +++ b/arch/arm/include/asm/unified.h @@ -0,0 +1,126 @@ +/* + * include/asm-arm/unified.h - Unified Assembler Syntax helper macros + * + * Copyright (C) 2008 ARM Limited + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#ifndef __ASM_UNIFIED_H +#define __ASM_UNIFIED_H + +#if defined(__ASSEMBLY__) && defined(CONFIG_ARM_ASM_UNIFIED) + .syntax unified +#endif + +#ifdef CONFIG_THUMB2_KERNEL + +#if __GNUC__ < 4 +#error Thumb-2 kernel requires gcc >= 4 +#endif + +/* The CPSR bit describing the instruction set (Thumb) */ +#define PSR_ISETSTATE PSR_T_BIT + +#define ARM(x...) +#define THUMB(x...) x +#define W(instr) instr.w +#define BSYM(sym) sym + 1 + +#else /* !CONFIG_THUMB2_KERNEL */ + +/* The CPSR bit describing the instruction set (ARM) */ +#define PSR_ISETSTATE 0 + +#define ARM(x...) x +#define THUMB(x...) +#define W(instr) instr +#define BSYM(sym) sym + +#endif /* CONFIG_THUMB2_KERNEL */ + +#ifndef CONFIG_ARM_ASM_UNIFIED + +/* + * If the unified assembly syntax isn't used (in ARM mode), these + * macros expand to an empty string + */ +#ifdef __ASSEMBLY__ + .macro it, cond + .endm + .macro itt, cond + .endm + .macro ite, cond + .endm + .macro ittt, cond + .endm + .macro itte, cond + .endm + .macro itet, cond + .endm + .macro itee, cond + .endm + .macro itttt, cond + .endm + .macro ittte, cond + .endm + .macro ittet, cond + .endm + .macro ittee, cond + .endm + .macro itett, cond + .endm + .macro itete, cond + .endm + .macro iteet, cond + .endm + .macro iteee, cond + .endm +#else /* !__ASSEMBLY__ */ +__asm__( +" .macro it, cond\n" +" .endm\n" +" .macro itt, cond\n" +" .endm\n" +" .macro ite, cond\n" +" .endm\n" +" .macro ittt, cond\n" +" .endm\n" +" .macro itte, cond\n" +" .endm\n" +" .macro itet, cond\n" +" .endm\n" +" .macro itee, cond\n" +" .endm\n" +" .macro itttt, cond\n" +" .endm\n" +" .macro ittte, cond\n" +" .endm\n" +" .macro ittet, cond\n" +" .endm\n" +" .macro ittee, cond\n" +" .endm\n" +" .macro itett, cond\n" +" .endm\n" +" .macro itete, cond\n" +" .endm\n" +" .macro iteet, cond\n" +" .endm\n" +" .macro iteee, cond\n" +" .endm\n"); +#endif /* __ASSEMBLY__ */ + +#endif /* CONFIG_ARM_ASM_UNIFIED */ + +#endif /* !__ASM_UNIFIED_H */ -- cgit v1.2.3 From b86040a59feb255a8193173caa4d5199464433d5 Mon Sep 17 00:00:00 2001 From: Catalin Marinas Date: Fri, 24 Jul 2009 12:32:54 +0100 Subject: Thumb-2: Implementation of the unified start-up and exceptions code This patch implements the ARM/Thumb-2 unified kernel start-up and exception handling code. Signed-off-by: Catalin Marinas --- arch/arm/include/asm/assembler.h | 11 +++ arch/arm/include/asm/futex.h | 1 + arch/arm/kernel/entry-armv.S | 165 +++++++++++++++++++++++---------------- arch/arm/kernel/entry-common.S | 28 ++----- arch/arm/kernel/entry-header.S | 92 ++++++++++++++++++++-- arch/arm/kernel/head-common.S | 13 +-- arch/arm/kernel/head-nommu.S | 11 ++- arch/arm/kernel/head.S | 28 ++++--- arch/arm/kernel/process.c | 2 +- arch/arm/kernel/setup.c | 28 +++++-- arch/arm/kernel/unwind.c | 4 + 11 files changed, 263 insertions(+), 120 deletions(-) diff --git a/arch/arm/include/asm/assembler.h b/arch/arm/include/asm/assembler.h index 15f8a092b70..1acd1da36d0 100644 --- a/arch/arm/include/asm/assembler.h +++ b/arch/arm/include/asm/assembler.h @@ -127,3 +127,14 @@ #endif #endif .endm + +#ifdef CONFIG_THUMB2_KERNEL + .macro setmode, mode, reg + mov \reg, #\mode + msr cpsr_c, \reg + .endm +#else + .macro setmode, mode, reg + msr cpsr_c, #\mode + .endm +#endif diff --git a/arch/arm/include/asm/futex.h b/arch/arm/include/asm/futex.h index 9ee743b95de..bfcc15929a7 100644 --- a/arch/arm/include/asm/futex.h +++ b/arch/arm/include/asm/futex.h @@ -99,6 +99,7 @@ futex_atomic_cmpxchg_inatomic(int __user *uaddr, int oldval, int newval) __asm__ __volatile__("@futex_atomic_cmpxchg_inatomic\n" "1: ldrt %0, [%3]\n" " teq %0, %1\n" + " it eq @ explicit IT needed for the 2b label\n" "2: streqt %2, [%3]\n" "3:\n" " .section __ex_table,\"a\"\n" diff --git a/arch/arm/kernel/entry-armv.S b/arch/arm/kernel/entry-armv.S index 0befd1cabf4..468425f937d 100644 --- a/arch/arm/kernel/entry-armv.S +++ b/arch/arm/kernel/entry-armv.S @@ -34,7 +34,7 @@ @ @ routine called with r0 = irq number, r1 = struct pt_regs * @ - adrne lr, 1b + adrne lr, BSYM(1b) bne asm_do_IRQ #ifdef CONFIG_SMP @@ -46,13 +46,13 @@ */ test_for_ipi r0, r6, r5, lr movne r0, sp - adrne lr, 1b + adrne lr, BSYM(1b) bne do_IPI #ifdef CONFIG_LOCAL_TIMERS test_for_ltirq r0, r6, r5, lr movne r0, sp - adrne lr, 1b + adrne lr, BSYM(1b) bne do_local_timer #endif #endif @@ -70,7 +70,10 @@ */ .macro inv_entry, reason sub sp, sp, #S_FRAME_SIZE - stmib sp, {r1 - lr} + ARM( stmib sp, {r1 - lr} ) + THUMB( stmia sp, {r0 - r12} ) + THUMB( str sp, [sp, #S_SP] ) + THUMB( str lr, [sp, #S_LR] ) mov r1, #\reason .endm @@ -126,17 +129,24 @@ ENDPROC(__und_invalid) .macro svc_entry, stack_hole=0 UNWIND(.fnstart ) UNWIND(.save {r0 - pc} ) - sub sp, sp, #(S_FRAME_SIZE + \stack_hole) + sub sp, sp, #(S_FRAME_SIZE + \stack_hole - 4) +#ifdef CONFIG_THUMB2_KERNEL + SPFIX( str r0, [sp] ) @ temporarily saved + SPFIX( mov r0, sp ) + SPFIX( tst r0, #4 ) @ test original stack alignment + SPFIX( ldr r0, [sp] ) @ restored +#else SPFIX( tst sp, #4 ) - SPFIX( bicne sp, sp, #4 ) - stmib sp, {r1 - r12} +#endif + SPFIX( subeq sp, sp, #4 ) + stmia sp, {r1 - r12} ldmia r0, {r1 - r3} - add r5, sp, #S_SP @ here for interlock avoidance + add r5, sp, #S_SP - 4 @ here for interlock avoidance mov r4, #-1 @ "" "" "" "" - add r0, sp, #(S_FRAME_SIZE + \stack_hole) - SPFIX( addne r0, r0, #4 ) - str r1, [sp] @ save the "real" r0 copied + add r0, sp, #(S_FRAME_SIZE + \stack_hole - 4) + SPFIX( addeq r0, r0, #4 ) + str r1, [sp, #-4]! @ save the "real" r0 copied @ from the exception stack mov r1, lr @@ -196,9 +206,8 @@ __dabt_svc: @ @ restore SPSR and restart the instruction @ - ldr r0, [sp, #S_PSR] - msr spsr_cxsf, r0 - ldmia sp, {r0 - pc}^ @ load r0 - pc, cpsr + ldr r2, [sp, #S_PSR] + svc_exit r2 @ return from exception UNWIND(.fnend ) ENDPROC(__dabt_svc) @@ -225,13 +234,12 @@ __irq_svc: tst r0, #_TIF_NEED_RESCHED blne svc_preempt #endif - ldr r0, [sp, #S_PSR] @ irqs are already disabled - msr spsr_cxsf, r0 + ldr r4, [sp, #S_PSR] @ irqs are already disabled #ifdef CONFIG_TRACE_IRQFLAGS - tst r0, #PSR_I_BIT + tst r4, #PSR_I_BIT bleq trace_hardirqs_on #endif - ldmia sp, {r0 - pc}^ @ load r0 - pc, cpsr + svc_exit r4 @ return from exception UNWIND(.fnend ) ENDPROC(__irq_svc) @@ -266,7 +274,7 @@ __und_svc: @ r0 - instruction @ ldr r0, [r2, #-4] - adr r9, 1f + adr r9, BSYM(1f) bl call_fpe mov r0, sp @ struct pt_regs *regs @@ -280,9 +288,8 @@ __und_svc: @ @ restore SPSR and restart the instruction @ - ldr lr, [sp, #S_PSR] @ Get SVC cpsr - msr spsr_cxsf, lr - ldmia sp, {r0 - pc}^ @ Restore SVC registers + ldr r2, [sp, #S_PSR] @ Get SVC cpsr + svc_exit r2 @ return from exception UNWIND(.fnend ) ENDPROC(__und_svc) @@ -323,9 +330,8 @@ __pabt_svc: @ @ restore SPSR and restart the instruction @ - ldr r0, [sp, #S_PSR] - msr spsr_cxsf, r0 - ldmia sp, {r0 - pc}^ @ load r0 - pc, cpsr + ldr r2, [sp, #S_PSR] + svc_exit r2 @ return from exception UNWIND(.fnend ) ENDPROC(__pabt_svc) @@ -353,7 +359,8 @@ ENDPROC(__pabt_svc) UNWIND(.fnstart ) UNWIND(.cantunwind ) @ don't unwind the user space sub sp, sp, #S_FRAME_SIZE - stmib sp, {r1 - r12} + ARM( stmib sp, {r1 - r12} ) + THUMB( stmia sp, {r0 - r12} ) ldmia r0, {r1 - r3} add r0, sp, #S_PC @ here for interlock avoidance @@ -372,7 +379,8 @@ ENDPROC(__pabt_svc) @ Also, separately save sp_usr and lr_usr @ stmia r0, {r2 - r4} - stmdb r0, {sp, lr}^ + ARM( stmdb r0, {sp, lr}^ ) + THUMB( store_user_sp_lr r0, r1, S_SP - S_PC ) @ @ Enable the alignment trap while in kernel mode @@ -427,7 +435,7 @@ __dabt_usr: @ enable_irq mov r2, sp - adr lr, ret_from_exception + adr lr, BSYM(ret_from_exception) b do_DataAbort UNWIND(.fnend ) ENDPROC(__dabt_usr) @@ -452,7 +460,9 @@ __irq_usr: ldr r0, [tsk, #TI_PREEMPT] str r8, [tsk, #TI_PREEMPT] teq r0, r7 - strne r0, [r0, -r0] + ARM( strne r0, [r0, -r0] ) + THUMB( movne r0, #0 ) + THUMB( strne r0, [r0] ) #endif #ifdef CONFIG_TRACE_IRQFLAGS bl trace_hardirqs_on @@ -476,9 +486,10 @@ __und_usr: @ @ r0 - instruction @ - adr r9, ret_from_exception - adr lr, __und_usr_unknown + adr r9, BSYM(ret_from_exception) + adr lr, BSYM(__und_usr_unknown) tst r3, #PSR_T_BIT @ Thumb mode? + itet eq @ explicit IT needed for the 1f label subeq r4, r2, #4 @ ARM instr at LR - 4 subne r4, r2, #2 @ Thumb instr at LR - 2 1: ldreqt r0, [r4] @@ -488,7 +499,10 @@ __und_usr: beq call_fpe @ Thumb instruction #if __LINUX_ARM_ARCH__ >= 7 -2: ldrht r5, [r4], #2 +2: + ARM( ldrht r5, [r4], #2 ) + THUMB( ldrht r5, [r4] ) + THUMB( add r4, r4, #2 ) and r0, r5, #0xf800 @ mask bits 111x x... .... .... cmp r0, #0xe800 @ 32bit instruction if xx != 0 blo __und_usr_unknown @@ -577,9 +591,11 @@ call_fpe: moveq pc, lr get_thread_info r10 @ get current thread and r8, r0, #0x00000f00 @ mask out CP number + THUMB( lsr r8, r8, #8 ) mov r7, #1 add r6, r10, #TI_USED_CP - strb r7, [r6, r8, lsr #8] @ set appropriate used_cp[] + ARM( strb r7, [r6, r8, lsr #8] ) @ set appropriate used_cp[] + THUMB( strb r7, [r6, r8] ) @ set appropriate used_cp[] #ifdef CONFIG_IWMMXT @ Test if we need to give access to iWMMXt coprocessors ldr r5, [r10, #TI_FLAGS] @@ -587,36 +603,38 @@ call_fpe: movcss r7, r5, lsr #(TIF_USING_IWMMXT + 1) bcs iwmmxt_task_enable #endif - add pc, pc, r8, lsr #6 - mov r0, r0 - - mov pc, lr @ CP#0 - b do_fpe @ CP#1 (FPE) - b do_fpe @ CP#2 (FPE) - mov pc, lr @ CP#3 + ARM( add pc, pc, r8, lsr #6 ) + THUMB( lsl r8, r8, #2 ) + THUMB( add pc, r8 ) + nop + + W(mov) pc, lr @ CP#0 + W(b) do_fpe @ CP#1 (FPE) + W(b) do_fpe @ CP#2 (FPE) + W(mov) pc, lr @ CP#3 #ifdef CONFIG_CRUNCH b crunch_task_enable @ CP#4 (MaverickCrunch) b crunch_task_enable @ CP#5 (MaverickCrunch) b crunch_task_enable @ CP#6 (MaverickCrunch) #else - mov pc, lr @ CP#4 - mov pc, lr @ CP#5 - mov pc, lr @ CP#6 + W(mov) pc, lr @ CP#4 + W(mov) pc, lr @ CP#5 + W(mov) pc, lr @ CP#6 #endif - mov pc, lr @ CP#7 - mov pc, lr @ CP#8 - mov pc, lr @ CP#9 + W(mov) pc, lr @ CP#7 + W(mov) pc, lr @ CP#8 + W(mov) pc, lr @ CP#9 #ifdef CONFIG_VFP - b do_vfp @ CP#10 (VFP) - b do_vfp @ CP#11 (VFP) + W(b) do_vfp @ CP#10 (VFP) + W(b) do_vfp @ CP#11 (VFP) #else - mov pc, lr @ CP#10 (VFP) - mov pc, lr @ CP#11 (VFP) + W(mov) pc, lr @ CP#10 (VFP) + W(mov) pc, lr @ CP#11 (VFP) #endif - mov pc, lr @ CP#12 - mov pc, lr @ CP#13 - mov pc, lr @ CP#14 (Debug) - mov pc, lr @ CP#15 (Control) + W(mov) pc, lr @ CP#12 + W(mov) pc, lr @ CP#13 + W(mov) pc, lr @ CP#14 (Debug) + W(mov) pc, lr @ CP#15 (Control) #ifdef CONFIG_NEON .align 6 @@ -667,7 +685,7 @@ no_fp: mov pc, lr __und_usr_unknown: enable_irq mov r0, sp - adr lr, ret_from_exception + adr lr, BSYM(ret_from_exception) b do_undefinstr ENDPROC(__und_usr_unknown) @@ -711,7 +729,10 @@ ENTRY(__switch_to) UNWIND(.cantunwind ) add ip, r1, #TI_CPU_SAVE ldr r3, [r2, #TI_TP_VALUE] - stmia ip!, {r4 - sl, fp, sp, lr} @ Store most regs on stack + ARM( stmia ip!, {r4 - sl, fp, sp, lr} ) @ Store most regs on stack + THUMB( stmia ip!, {r4 - sl, fp} ) @ Store most regs on stack + THUMB( str sp, [ip], #4 ) + THUMB( str lr, [ip], #4 ) #ifdef CONFIG_MMU ldr r6, [r2, #TI_CPU_DOMAIN] #endif @@ -736,8 +757,12 @@ ENTRY(__switch_to) ldr r0, =thread_notify_head mov r1, #THREAD_NOTIFY_SWITCH bl atomic_notifier_call_chain + THUMB( mov ip, r4 ) mov r0, r5 - ldmia r4, {r4 - sl, fp, sp, pc} @ Load all regs saved previously + ARM( ldmia r4, {r4 - sl, fp, sp, pc} ) @ Load all regs saved previously + THUMB( ldmia ip!, {r4 - sl, fp} ) @ Load all regs saved previously + THUMB( ldr sp, [ip], #4 ) + THUMB( ldr pc, [ip] ) UNWIND(.fnend ) ENDPROC(__switch_to) @@ -772,6 +797,7 @@ ENDPROC(__switch_to) * if your compiled code is not going to use the new instructions for other * purpose. */ + THUMB( .arm ) .macro usr_ret, reg #ifdef CONFIG_ARM_THUMB @@ -1020,6 +1046,7 @@ __kuser_helper_version: @ 0xffff0ffc .globl __kuser_helper_end __kuser_helper_end: + THUMB( .thumb ) /* * Vector stubs. @@ -1054,15 +1081,17 @@ vector_\name: @ Prepare for SVC32 mode. IRQs remain disabled. @ mrs r0, cpsr - eor r0, r0, #(\mode ^ SVC_MODE) + eor r0, r0, #(\mode ^ SVC_MODE | PSR_ISETSTATE) msr spsr_cxsf, r0 @ @ the branch table must immediately follow this code @ and lr, lr, #0x0f + THUMB( adr r0, 1f ) + THUMB( ldr lr, [r0, lr, lsl #2] ) mov r0, sp - ldr lr, [pc, lr, lsl #2] + ARM( ldr lr, [pc, lr, lsl #2] ) movs pc, lr @ branch to handler in SVC mode ENDPROC(vector_\name) @@ -1206,14 +1235,16 @@ __stubs_end: .globl __vectors_start __vectors_start: - swi SYS_ERROR0 - b vector_und + stubs_offset - ldr pc, .LCvswi + stubs_offset - b vector_pabt + stubs_offset - b vector_dabt + stubs_offset - b vector_addrexcptn + stubs_offset - b vector_irq + stubs_offset - b vector_fiq + stubs_offset + ARM( swi SYS_ERROR0 ) + THUMB( svc #0 ) + THUMB( nop ) + W(b) vector_und + stubs_offset + W(ldr) pc, .LCvswi + stubs_offset + W(b) vector_pabt + stubs_offset + W(b) vector_dabt + stubs_offset + W(b) vector_addrexcptn + stubs_offset + W(b) vector_irq + stubs_offset + W(b) vector_fiq + stubs_offset .globl __vectors_end __vectors_end: diff --git a/arch/arm/kernel/entry-common.S b/arch/arm/kernel/entry-common.S index 366e5097a41..a0540c9f1f0 100644 --- a/arch/arm/kernel/entry-common.S +++ b/arch/arm/kernel/entry-common.S @@ -33,14 +33,7 @@ ret_fast_syscall: /* perform architecture specific actions before user return */ arch_ret_to_user r1, lr - @ fast_restore_user_regs - ldr r1, [sp, #S_OFF + S_PSR] @ get calling cpsr - ldr lr, [sp, #S_OFF + S_PC]! @ get pc - msr spsr_cxsf, r1 @ save in spsr_svc - ldmdb sp, {r1 - lr}^ @ get calling r1 - lr - mov r0, r0 - add sp, sp, #S_FRAME_SIZE - S_PC - movs pc, lr @ return & move spsr_svc into cpsr + restore_user_regs fast = 1, offset = S_OFF UNWIND(.fnend ) /* @@ -73,14 +66,7 @@ no_work_pending: /* perform architecture specific actions before user return */ arch_ret_to_user r1, lr - @ slow_restore_user_regs - ldr r1, [sp, #S_PSR] @ get calling cpsr - ldr lr, [sp, #S_PC]! @ get pc - msr spsr_cxsf, r1 @ save in spsr_svc - ldmdb sp, {r0 - lr}^ @ get calling r0 - lr - mov r0, r0 - add sp, sp, #S_FRAME_SIZE - S_PC - movs pc, lr @ return & move spsr_svc into cpsr + restore_user_regs fast = 0, offset = 0 ENDPROC(ret_to_user) /* @@ -182,8 +168,10 @@ ftrace_stub: ENTRY(vector_swi) sub sp, sp, #S_FRAME_SIZE stmia sp, {r0 - r12} @ Calling r0 - r12 - add r8, sp, #S_PC - stmdb r8, {sp, lr}^ @ Calling sp, lr + ARM( add r8, sp, #S_PC ) + ARM( stmdb r8, {sp, lr}^ ) @ Calling sp, lr + THUMB( mov r8, sp ) + THUMB( store_user_sp_lr r8, r10, S_SP ) @ calling sp, lr mrs r8, spsr @ called from non-FIQ mode, so ok. str lr, [sp, #S_PC] @ Save calling PC str r8, [sp, #S_PSR] @ Save CPSR @@ -272,7 +260,7 @@ ENTRY(vector_swi) bne __sys_trace cmp scno, #NR_syscalls @ check upper syscall limit - adr lr, ret_fast_syscall @ return address + adr lr, BSYM(ret_fast_syscall) @ return address ldrcc pc, [tbl, scno, lsl #2] @ call sys_* routine add r1, sp, #S_OFF @@ -293,7 +281,7 @@ __sys_trace: mov r0, #0 @ trace entry [IP = 0] bl syscall_trace - adr lr, __sys_trace_return @ return address + adr lr, BSYM(__sys_trace_return) @ return address mov scno, r0 @ syscall number (possibly new) add r1, sp, #S_R0 + S_OFF @ pointer to regs cmp scno, #NR_syscalls @ check upper syscall limit diff --git a/arch/arm/kernel/entry-header.S b/arch/arm/kernel/entry-header.S index 87ab4e15799..a4eaf4f920c 100644 --- a/arch/arm/kernel/entry-header.S +++ b/arch/arm/kernel/entry-header.S @@ -36,11 +36,6 @@ #endif .endm - .macro get_thread_info, rd - mov \rd, sp, lsr #13 - mov \rd, \rd, lsl #13 - .endm - .macro alignment_trap, rtemp #ifdef CONFIG_ALIGNMENT_TRAP ldr \rtemp, .LCcralign @@ -49,6 +44,93 @@ #endif .endm + @ + @ Store/load the USER SP and LR registers by switching to the SYS + @ mode. Useful in Thumb-2 mode where "stm/ldm rd, {sp, lr}^" is not + @ available. Should only be called from SVC mode + @ + .macro store_user_sp_lr, rd, rtemp, offset = 0 + mrs \rtemp, cpsr + eor \rtemp, \rtemp, #(SVC_MODE ^ SYSTEM_MODE) + msr cpsr_c, \rtemp @ switch to the SYS mode + + str sp, [\rd, #\offset] @ save sp_usr + str lr, [\rd, #\offset + 4] @ save lr_usr + + eor \rtemp, \rtemp, #(SVC_MODE ^ SYSTEM_MODE) + msr cpsr_c, \rtemp @ switch back to the SVC mode + .endm + + .macro load_user_sp_lr, rd, rtemp, offset = 0 + mrs \rtemp, cpsr + eor \rtemp, \rtemp, #(SVC_MODE ^ SYSTEM_MODE) + msr cpsr_c, \rtemp @ switch to the SYS mode + + ldr sp, [\rd, #\offset] @ load sp_usr + ldr lr, [\rd, #\offset + 4] @ load lr_usr + + eor \rtemp, \rtemp, #(SVC_MODE ^ SYSTEM_MODE) + msr cpsr_c, \rtemp @ switch back to the SVC mode + .endm + +#ifndef CONFIG_THUMB2_KERNEL + .macro svc_exit, rpsr + msr spsr_cxsf, \rpsr + ldmia sp, {r0 - pc}^ @ load r0 - pc, cpsr + .endm + + .macro restore_user_regs, fast = 0, offset = 0 + ldr r1, [sp, #\offset + S_PSR] @ get calling cpsr + ldr lr, [sp, #\offset + S_PC]! @ get pc + msr spsr_cxsf, r1 @ save in spsr_svc + .if \fast + ldmdb sp, {r1 - lr}^ @ get calling r1 - lr + .else + ldmdb sp, {r0 - lr}^ @ get calling r0 - lr + .endif + add sp, sp, #S_FRAME_SIZE - S_PC + movs pc, lr @ return & move spsr_svc into cpsr + .endm + + .macro get_thread_info, rd + mov \rd, sp, lsr #13 + mov \rd, \rd, lsl #13 + .endm +#else /* CONFIG_THUMB2_KERNEL */ + .macro svc_exit, rpsr + ldr r0, [sp, #S_SP] @ top of the stack + ldr r1, [sp, #S_PC] @ return address + tst r0, #4 @ orig stack 8-byte aligned? + stmdb r0, {r1, \rpsr} @ rfe context + ldmia sp, {r0 - r12} + ldr lr, [sp, #S_LR] + addeq sp, sp, #S_FRAME_SIZE - 8 @ aligned + addne sp, sp, #S_FRAME_SIZE - 4 @ not aligned + rfeia sp! + .endm + + .macro restore_user_regs, fast = 0, offset = 0 + mov r2, sp + load_user_sp_lr r2, r3, \offset + S_SP @ calling sp, lr + ldr r1, [sp, #\offset + S_PSR] @ get calling cpsr + ldr lr, [sp, #\offset + S_PC] @ get pc + add sp, sp, #\offset + S_SP + msr spsr_cxsf, r1 @ save in spsr_svc + .if \fast + ldmdb sp, {r1 - r12} @ get calling r1 - r12 + .else + ldmdb sp, {r0 - r12} @ get calling r0 - r12 + .endif + add sp, sp, #S_FRAME_SIZE - S_SP + movs pc, lr @ return & move spsr_svc into cpsr + .endm + + .macro get_thread_info, rd + mov \rd, sp + lsr \rd, \rd, #13 + mov \rd, \rd, lsl #13 + .endm +#endif /* !CONFIG_THUMB2_KERNEL */ /* * These are the registers used in the syscall handler, and allow us to diff --git a/arch/arm/kernel/head-common.S b/arch/arm/kernel/head-common.S index dbfaef07a1f..93ad576b2d7 100644 --- a/arch/arm/kernel/head-common.S +++ b/arch/arm/kernel/head-common.S @@ -52,7 +52,9 @@ __mmap_switched: strcc fp, [r6],#4 bcc 1b - ldmia r3, {r4, r5, r6, r7, sp} + ARM( ldmia r3, {r4, r5, r6, r7, sp}) + THUMB( ldmia r3, {r4, r5, r6, r7} ) + THUMB( ldr sp, [r3, #16] ) str r9, [r4] @ Save processor ID str r1, [r5] @ Save machine type str r2, [r6] @ Save atags pointer @@ -156,7 +158,8 @@ ENDPROC(__error) */ __lookup_processor_type: adr r3, 3f - ldmda r3, {r5 - r7} + ldmia r3, {r5 - r7} + add r3, r3, #8 sub r3, r3, r7 @ get offset between virt&phys add r5, r5, r3 @ convert virt addresses to add r6, r6, r3 @ physical address space @@ -187,9 +190,9 @@ ENDPROC(lookup_processor_type) * more information about the __proc_info and __arch_info structures. */ .align 2 - .long __proc_info_begin +3: .long __proc_info_begin .long __proc_info_end -3: .long . +4: .long . .long __arch_info_begin .long __arch_info_end @@ -205,7 +208,7 @@ ENDPROC(lookup_processor_type) * r5 = mach_info pointer in physical address space */ __lookup_machine_type: - adr r3, 3b + adr r3, 4b ldmia r3, {r4, r5, r6} sub r3, r3, r4 @ get offset between virt&phys add r5, r5, r3 @ convert virt addresses to diff --git a/arch/arm/kernel/head-nommu.S b/arch/arm/kernel/head-nommu.S index cc87e1765ed..b16393d2b71 100644 --- a/arch/arm/kernel/head-nommu.S +++ b/arch/arm/kernel/head-nommu.S @@ -34,7 +34,7 @@ */ .section ".text.head", "ax" ENTRY(stext) - msr cpsr_c, #PSR_F_BIT | PSR_I_BIT | SVC_MODE @ ensure svc mode + setmode PSR_F_BIT | PSR_I_BIT | SVC_MODE, r9 @ ensure svc mode @ and irqs disabled #ifndef CONFIG_CPU_CP15 ldr r9, =CONFIG_PROCESSOR_ID @@ -50,8 +50,10 @@ ENTRY(stext) ldr r13, __switch_data @ address to jump to after @ the initialization is done - adr lr, __after_proc_init @ return (PIC) address - add pc, r10, #PROCINFO_INITFUNC + adr lr, BSYM(__after_proc_init) @ return (PIC) address + ARM( add pc, r10, #PROCINFO_INITFUNC ) + THUMB( add r12, r10, #PROCINFO_INITFUNC ) + THUMB( mov pc, r12 ) ENDPROC(stext) /* @@ -82,7 +84,8 @@ __after_proc_init: mcr p15, 0, r0, c1, c0, 0 @ write control reg #endif /* CONFIG_CPU_CP15 */ - mov pc, r13 @ clear the BSS and jump + mov r3, r13 + mov pc, r3 @ clear the BSS and jump @ to start_kernel ENDPROC(__after_proc_init) .ltorg diff --git a/arch/arm/kernel/head.S b/arch/arm/kernel/head.S index 21e17dc94cb..38ccbe1d3b2 100644 --- a/arch/arm/kernel/head.S +++ b/arch/arm/kernel/head.S @@ -76,7 +76,7 @@ */ .section ".text.head", "ax" ENTRY(stext) - msr cpsr_c, #PSR_F_BIT | PSR_I_BIT | SVC_MODE @ ensure svc mode + setmode PSR_F_BIT | PSR_I_BIT | SVC_MODE, r9 @ ensure svc mode @ and irqs disabled mrc p15, 0, r9, c0, c0 @ get processor id bl __lookup_processor_type @ r5=procinfo r9=cpuid @@ -97,8 +97,10 @@ ENTRY(stext) */ ldr r13, __switch_data @ address to jump to after @ mmu has been enabled - adr lr, __enable_mmu @ return (PIC) address - add pc, r10, #PROCINFO_INITFUNC + adr lr, BSYM(__enable_mmu) @ return (PIC) address + ARM( add pc, r10, #PROCINFO_INITFUNC ) + THUMB( add r12, r10, #PROCINFO_INITFUNC ) + THUMB( mov pc, r12 ) ENDPROC(stext) #if defined(CONFIG_SMP) @@ -110,7 +112,7 @@ ENTRY(secondary_startup) * the processor type - there is no need to check the machine type * as it has already been validated by the primary processor. */ - msr cpsr_c, #PSR_F_BIT | PSR_I_BIT | SVC_MODE + setmode PSR_F_BIT | PSR_I_BIT | SVC_MODE, r9 mrc p15, 0, r9, c0, c0 @ get processor id bl __lookup_processor_type movs r10, r5 @ invalid processor? @@ -121,12 +123,15 @@ ENTRY(secondary_startup) * Use the page tables supplied from __cpu_up. */ adr r4, __secondary_data - ldmia r4, {r5, r7, r13} @ address to jump to after + ldmia r4, {r5, r7, r12} @ address to jump to after sub r4, r4, r5 @ mmu has been enabled ldr r4, [r7, r4] @ get secondary_data.pgdir - adr lr, __enable_mmu @ return address - add pc, r10, #PROCINFO_INITFUNC @ initialise processor - @ (return control reg) + adr lr, BSYM(__enable_mmu) @ return address + mov r13, r12 @ __secondary_switched address + ARM( add pc, r10, #PROCINFO_INITFUNC ) @ initialise processor + @ (return control reg) + THUMB( add r12, r10, #PROCINFO_INITFUNC ) + THUMB( mov pc, r12 ) ENDPROC(secondary_startup) /* @@ -193,8 +198,8 @@ __turn_mmu_on: mcr p15, 0, r0, c1, c0, 0 @ write control reg mrc p15, 0, r3, c0, c0, 0 @ read id reg mov r3, r3 - mov r3, r3 - mov pc, r13 + mov r3, r13 + mov pc, r3 ENDPROC(__turn_mmu_on) @@ -235,7 +240,8 @@ __create_page_tables: * will be removed by paging_init(). We use our current program * counter to determine corresponding section base address. */ - mov r6, pc, lsr #20 @ start of kernel section + mov r6, pc + mov r6, r6, lsr #20 @ start of kernel section orr r3, r7, r6, lsl #20 @ flags + kernel base str r3, [r4, r6, lsl #2] @ identity mapping diff --git a/arch/arm/kernel/process.c b/arch/arm/kernel/process.c index 39196dff478..790fbee92ec 100644 --- a/arch/arm/kernel/process.c +++ b/arch/arm/kernel/process.c @@ -388,7 +388,7 @@ pid_t kernel_thread(int (*fn)(void *), void *arg, unsigned long flags) regs.ARM_r2 = (unsigned long)fn; regs.ARM_r3 = (unsigned long)kernel_thread_exit; regs.ARM_pc = (unsigned long)kernel_thread_helper; - regs.ARM_cpsr = SVC_MODE | PSR_ENDSTATE; + regs.ARM_cpsr = SVC_MODE | PSR_ENDSTATE | PSR_ISETSTATE; return do_fork(flags|CLONE_VM|CLONE_UNTRACED, 0, ®s, 0, NULL, NULL); } diff --git a/arch/arm/kernel/setup.c b/arch/arm/kernel/setup.c index bc5e4128f9f..d4d4f77c91b 100644 --- a/arch/arm/kernel/setup.c +++ b/arch/arm/kernel/setup.c @@ -25,6 +25,7 @@ #include #include +#include #include #include #include @@ -326,26 +327,39 @@ void cpu_init(void) BUG(); } + /* + * Define the placement constraint for the inline asm directive below. + * In Thumb-2, msr with an immediate value is not allowed. + */ +#ifdef CONFIG_THUMB2_KERNEL +#define PLC "r" +#else +#define PLC "I" +#endif + /* * setup stacks for re-entrant exception handlers */ __asm__ ( "msr cpsr_c, %1\n\t" - "add sp, %0, %2\n\t" + "add r14, %0, %2\n\t" + "mov sp, r14\n\t" "msr cpsr_c, %3\n\t" - "add sp, %0, %4\n\t" + "add r14, %0, %4\n\t" + "mov sp, r14\n\t" "msr cpsr_c, %5\n\t" - "add sp, %0, %6\n\t" + "add r14, %0, %6\n\t" + "mov sp, r14\n\t" "msr cpsr_c, %7" : : "r" (stk), - "I" (PSR_F_BIT | PSR_I_BIT | IRQ_MODE), + PLC (PSR_F_BIT | PSR_I_BIT | IRQ_MODE), "I" (offsetof(struct stack, irq[0])), - "I" (PSR_F_BIT | PSR_I_BIT | ABT_MODE), + PLC (PSR_F_BIT | PSR_I_BIT | ABT_MODE), "I" (offsetof(struct stack, abt[0])), - "I" (PSR_F_BIT | PSR_I_BIT | UND_MODE), + PLC (PSR_F_BIT | PSR_I_BIT | UND_MODE), "I" (offsetof(struct stack, und[0])), - "I" (PSR_F_BIT | PSR_I_BIT | SVC_MODE) + PLC (PSR_F_BIT | PSR_I_BIT | SVC_MODE) : "r14"); } diff --git a/arch/arm/kernel/unwind.c b/arch/arm/kernel/unwind.c index dd56e11f339..39baf1128bf 100644 --- a/arch/arm/kernel/unwind.c +++ b/arch/arm/kernel/unwind.c @@ -62,7 +62,11 @@ struct unwind_ctrl_block { }; enum regs { +#ifdef CONFIG_THUMB2_KERNEL + FP = 7, +#else FP = 11, +#endif SP = 13, LR = 14, PC = 15 -- cgit v1.2.3 From 347c8b70b1d5256e445e54e736f88d21877616cf Mon Sep 17 00:00:00 2001 From: Catalin Marinas Date: Fri, 24 Jul 2009 12:32:56 +0100 Subject: Thumb-2: Implement the unified arch/arm/mm support This patch adds the ARM/Thumb-2 unified support to the arch/arm/mm/* files. Signed-off-by: Catalin Marinas --- arch/arm/mm/alignment.c | 20 +++++++++++++++----- arch/arm/mm/cache-v7.S | 16 +++++++++++----- arch/arm/mm/proc-v7.S | 5 ++++- 3 files changed, 30 insertions(+), 11 deletions(-) diff --git a/arch/arm/mm/alignment.c b/arch/arm/mm/alignment.c index 03cd27d917b..b270d6228fe 100644 --- a/arch/arm/mm/alignment.c +++ b/arch/arm/mm/alignment.c @@ -159,7 +159,9 @@ union offset_union { #define __get8_unaligned_check(ins,val,addr,err) \ __asm__( \ - "1: "ins" %1, [%2], #1\n" \ + ARM( "1: "ins" %1, [%2], #1\n" ) \ + THUMB( "1: "ins" %1, [%2]\n" ) \ + THUMB( " add %2, %2, #1\n" ) \ "2:\n" \ " .section .fixup,\"ax\"\n" \ " .align 2\n" \ @@ -215,7 +217,9 @@ union offset_union { do { \ unsigned int err = 0, v = val, a = addr; \ __asm__( FIRST_BYTE_16 \ - "1: "ins" %1, [%2], #1\n" \ + ARM( "1: "ins" %1, [%2], #1\n" ) \ + THUMB( "1: "ins" %1, [%2]\n" ) \ + THUMB( " add %2, %2, #1\n" ) \ " mov %1, %1, "NEXT_BYTE"\n" \ "2: "ins" %1, [%2]\n" \ "3:\n" \ @@ -245,11 +249,17 @@ union offset_union { do { \ unsigned int err = 0, v = val, a = addr; \ __asm__( FIRST_BYTE_32 \ - "1: "ins" %1, [%2], #1\n" \ + ARM( "1: "ins" %1, [%2], #1\n" ) \ + THUMB( "1: "ins" %1, [%2]\n" ) \ + THUMB( " add %2, %2, #1\n" ) \ " mov %1, %1, "NEXT_BYTE"\n" \ - "2: "ins" %1, [%2], #1\n" \ + ARM( "2: "ins" %1, [%2], #1\n" ) \ + THUMB( "2: "ins" %1, [%2]\n" ) \ + THUMB( " add %2, %2, #1\n" ) \ " mov %1, %1, "NEXT_BYTE"\n" \ - "3: "ins" %1, [%2], #1\n" \ + ARM( "3: "ins" %1, [%2], #1\n" ) \ + THUMB( "3: "ins" %1, [%2]\n" ) \ + THUMB( " add %2, %2, #1\n" ) \ " mov %1, %1, "NEXT_BYTE"\n" \ "4: "ins" %1, [%2]\n" \ "5:\n" \ diff --git a/arch/arm/mm/cache-v7.S b/arch/arm/mm/cache-v7.S index be93ff02a98..bda0ec31a4e 100644 --- a/arch/arm/mm/cache-v7.S +++ b/arch/arm/mm/cache-v7.S @@ -21,7 +21,7 @@ * * Flush the whole D-cache. * - * Corrupted registers: r0-r5, r7, r9-r11 + * Corrupted registers: r0-r7, r9-r11 (r6 only in Thumb mode) * * - mm - mm_struct describing address space */ @@ -51,8 +51,12 @@ loop1: loop2: mov r9, r4 @ create working copy of max way size loop3: - orr r11, r10, r9, lsl r5 @ factor way and cache number into r11 - orr r11, r11, r7, lsl r2 @ factor index number into r11 + ARM( orr r11, r10, r9, lsl r5 ) @ factor way and cache number into r11 + THUMB( lsl r6, r9, r5 ) + THUMB( orr r11, r10, r6 ) @ factor way and cache number into r11 + ARM( orr r11, r11, r7, lsl r2 ) @ factor index number into r11 + THUMB( lsl r6, r7, r2 ) + THUMB( orr r11, r11, r6 ) @ factor index number into r11 mcr p15, 0, r11, c7, c14, 2 @ clean & invalidate by set/way subs r9, r9, #1 @ decrement the way bge loop3 @@ -82,11 +86,13 @@ ENDPROC(v7_flush_dcache_all) * */ ENTRY(v7_flush_kern_cache_all) - stmfd sp!, {r4-r5, r7, r9-r11, lr} + ARM( stmfd sp!, {r4-r5, r7, r9-r11, lr} ) + THUMB( stmfd sp!, {r4-r7, r9-r11, lr} ) bl v7_flush_dcache_all mov r0, #0 mcr p15, 0, r0, c7, c5, 0 @ I+BTB cache invalidate - ldmfd sp!, {r4-r5, r7, r9-r11, lr} + ARM( ldmfd sp!, {r4-r5, r7, r9-r11, lr} ) + THUMB( ldmfd sp!, {r4-r7, r9-r11, lr} ) mov pc, lr ENDPROC(v7_flush_kern_cache_all) diff --git a/arch/arm/mm/proc-v7.S b/arch/arm/mm/proc-v7.S index 180a08d03a0..c19aecdb202 100644 --- a/arch/arm/mm/proc-v7.S +++ b/arch/arm/mm/proc-v7.S @@ -127,7 +127,9 @@ ENDPROC(cpu_v7_switch_mm) */ ENTRY(cpu_v7_set_pte_ext) #ifdef CONFIG_MMU - str r1, [r0], #-2048 @ linux version + ARM( str r1, [r0], #-2048 ) @ linux version + THUMB( str r1, [r0] ) @ linux version + THUMB( sub r0, r0, #2048 ) bic r3, r1, #0x000003f0 bic r3, r3, #PTE_TYPE_MASK @@ -273,6 +275,7 @@ __v7_setup: mrc p15, 0, r0, c1, c0, 0 @ read control register bic r0, r0, r5 @ clear bits them orr r0, r0, r6 @ set them + THUMB( orr r0, r0, #1 << 30 ) @ Thumb exceptions mov pc, lr @ return to head.S:__ret ENDPROC(__v7_setup) -- cgit v1.2.3 From 8b592783a2e8b7721a99730bd549aab5208f36af Mon Sep 17 00:00:00 2001 From: Catalin Marinas Date: Fri, 24 Jul 2009 12:32:57 +0100 Subject: Thumb-2: Implement the unified arch/arm/lib functions This patch adds the ARM/Thumb-2 unified support for the arch/arm/lib/* files. Signed-off-by: Catalin Marinas --- arch/arm/include/asm/assembler.h | 73 ++++++++++++++++++++++++++++++++++++++ arch/arm/include/asm/uaccess.h | 7 ++-- arch/arm/lib/ashldi3.S | 4 ++- arch/arm/lib/ashrdi3.S | 4 ++- arch/arm/lib/backtrace.S | 8 +++-- arch/arm/lib/clear_user.S | 15 ++++---- arch/arm/lib/copy_from_user.S | 19 +++++----- arch/arm/lib/copy_template.S | 24 +++++++++++-- arch/arm/lib/copy_to_user.S | 19 +++++----- arch/arm/lib/csumpartialcopyuser.S | 48 +++++++------------------ arch/arm/lib/div64.S | 4 ++- arch/arm/lib/findbit.S | 34 +++++++++++++----- arch/arm/lib/getuser.S | 5 +++ arch/arm/lib/io-writesw-armv4.S | 5 ++- arch/arm/lib/lshrdi3.S | 4 ++- arch/arm/lib/memcpy.S | 7 ++-- arch/arm/lib/memmove.S | 28 +++++++-------- arch/arm/lib/putuser.S | 15 ++++++++ arch/arm/lib/strncpy_from_user.S | 2 +- arch/arm/lib/strnlen_user.S | 2 +- 20 files changed, 229 insertions(+), 98 deletions(-) diff --git a/arch/arm/include/asm/assembler.h b/arch/arm/include/asm/assembler.h index 1acd1da36d0..2b60c7d0577 100644 --- a/arch/arm/include/asm/assembler.h +++ b/arch/arm/include/asm/assembler.h @@ -138,3 +138,76 @@ msr cpsr_c, #\mode .endm #endif + +/* + * STRT/LDRT access macros with ARM and Thumb-2 variants + */ +#ifdef CONFIG_THUMB2_KERNEL + + .macro usraccoff, instr, reg, ptr, inc, off, cond, abort +9999: + .if \inc == 1 + \instr\cond\()bt \reg, [\ptr, #\off] + .elseif \inc == 4 + \instr\cond\()t \reg, [\ptr, #\off] + .else + .error "Unsupported inc macro argument" + .endif + + .section __ex_table,"a" + .align 3 + .long 9999b, \abort + .previous + .endm + + .macro usracc, instr, reg, ptr, inc, cond, rept, abort + @ explicit IT instruction needed because of the label + @ introduced by the USER macro + .ifnc \cond,al + .if \rept == 1 + itt \cond + .elseif \rept == 2 + ittt \cond + .else + .error "Unsupported rept macro argument" + .endif + .endif + + @ Slightly optimised to avoid incrementing the pointer twice + usraccoff \instr, \reg, \ptr, \inc, 0, \cond, \abort + .if \rept == 2 + usraccoff \instr, \reg, \ptr, \inc, 4, \cond, \abort + .endif + + add\cond \ptr, #\rept * \inc + .endm + +#else /* !CONFIG_THUMB2_KERNEL */ + + .macro usracc, instr, reg, ptr, inc, cond, rept, abort + .rept \rept +9999: + .if \inc == 1 + \instr\cond\()bt \reg, [\ptr], #\inc + .elseif \inc == 4 + \instr\cond\()t \reg, [\ptr], #\inc + .else + .error "Unsupported inc macro argument" + .endif + + .section __ex_table,"a" + .align 3 + .long 9999b, \abort + .previous + .endr + .endm + +#endif /* CONFIG_THUMB2_KERNEL */ + + .macro strusr, reg, ptr, inc, cond=al, rept=1, abort=9001f + usracc str, \reg, \ptr, \inc, \cond, \rept, \abort + .endm + + .macro ldrusr, reg, ptr, inc, cond=al, rept=1, abort=9001f + usracc ldr, \reg, \ptr, \inc, \cond, \rept, \abort + .endm diff --git a/arch/arm/include/asm/uaccess.h b/arch/arm/include/asm/uaccess.h index 0da9bc9b3b1..1d6bd40a432 100644 --- a/arch/arm/include/asm/uaccess.h +++ b/arch/arm/include/asm/uaccess.h @@ -17,6 +17,7 @@ #include #include #include +#include #define VERIFY_READ 0 #define VERIFY_WRITE 1 @@ -365,8 +366,10 @@ do { \ #define __put_user_asm_dword(x,__pu_addr,err) \ __asm__ __volatile__( \ - "1: strt " __reg_oper1 ", [%1], #4\n" \ - "2: strt " __reg_oper0 ", [%1]\n" \ + ARM( "1: strt " __reg_oper1 ", [%1], #4\n" ) \ + ARM( "2: strt " __reg_oper0 ", [%1]\n" ) \ + THUMB( "1: strt " __reg_oper1 ", [%1]\n" ) \ + THUMB( "2: strt " __reg_oper0 ", [%1, #4]\n" ) \ "3:\n" \ " .section .fixup,\"ax\"\n" \ " .align 2\n" \ diff --git a/arch/arm/lib/ashldi3.S b/arch/arm/lib/ashldi3.S index 1154d924080..638deb13da1 100644 --- a/arch/arm/lib/ashldi3.S +++ b/arch/arm/lib/ashldi3.S @@ -43,7 +43,9 @@ ENTRY(__aeabi_llsl) rsb ip, r2, #32 movmi ah, ah, lsl r2 movpl ah, al, lsl r3 - orrmi ah, ah, al, lsr ip + ARM( orrmi ah, ah, al, lsr ip ) + THUMB( lsrmi r3, al, ip ) + THUMB( orrmi ah, ah, r3 ) mov al, al, lsl r2 mov pc, lr diff --git a/arch/arm/lib/ashrdi3.S b/arch/arm/lib/ashrdi3.S index 9f8b35572f8..015e8aa5a1d 100644 --- a/arch/arm/lib/ashrdi3.S +++ b/arch/arm/lib/ashrdi3.S @@ -43,7 +43,9 @@ ENTRY(__aeabi_lasr) rsb ip, r2, #32 movmi al, al, lsr r2 movpl al, ah, asr r3 - orrmi al, al, ah, lsl ip + ARM( orrmi al, al, ah, lsl ip ) + THUMB( lslmi r3, ah, ip ) + THUMB( orrmi al, al, r3 ) mov ah, ah, asr r2 mov pc, lr diff --git a/arch/arm/lib/backtrace.S b/arch/arm/lib/backtrace.S index b0951d0e8b2..aaf7220d9e3 100644 --- a/arch/arm/lib/backtrace.S +++ b/arch/arm/lib/backtrace.S @@ -38,7 +38,9 @@ ENDPROC(c_backtrace) beq no_frame @ we have no stack frames tst r1, #0x10 @ 26 or 32-bit mode? - moveq mask, #0xfc000003 @ mask for 26-bit + ARM( moveq mask, #0xfc000003 ) + THUMB( moveq mask, #0xfc000000 ) + THUMB( orreq mask, #0x03 ) movne mask, #0 @ mask for 32-bit 1: stmfd sp!, {pc} @ calculate offset of PC stored @@ -126,7 +128,9 @@ ENDPROC(c_backtrace) mov reg, #10 mov r7, #0 1: mov r3, #1 - tst instr, r3, lsl reg + ARM( tst instr, r3, lsl reg ) + THUMB( lsl r3, reg ) + THUMB( tst instr, r3 ) beq 2f add r7, r7, #1 teq r7, #6 diff --git a/arch/arm/lib/clear_user.S b/arch/arm/lib/clear_user.S index 844f56785eb..1279abd8b88 100644 --- a/arch/arm/lib/clear_user.S +++ b/arch/arm/lib/clear_user.S @@ -27,21 +27,20 @@ WEAK(__clear_user) ands ip, r0, #3 beq 1f cmp ip, #2 -USER( strbt r2, [r0], #1) -USER( strlebt r2, [r0], #1) -USER( strltbt r2, [r0], #1) + strusr r2, r0, 1 + strusr r2, r0, 1, le + strusr r2, r0, 1, lt rsb ip, ip, #4 sub r1, r1, ip @ 7 6 5 4 3 2 1 1: subs r1, r1, #8 @ -1 -2 -3 -4 -5 -6 -7 -USER( strplt r2, [r0], #4) -USER( strplt r2, [r0], #4) + strusr r2, r0, 4, pl, rept=2 bpl 1b adds r1, r1, #4 @ 3 2 1 0 -1 -2 -3 -USER( strplt r2, [r0], #4) + strusr r2, r0, 4, pl 2: tst r1, #2 @ 1x 1x 0x 0x 1x 1x 0x -USER( strnebt r2, [r0], #1) -USER( strnebt r2, [r0], #1) + strusr r2, r0, 1, ne, rept=2 tst r1, #1 @ x1 x0 x1 x0 x1 x0 x1 + it ne @ explicit IT needed for the label USER( strnebt r2, [r0]) mov r0, #0 ldmfd sp!, {r1, pc} diff --git a/arch/arm/lib/copy_from_user.S b/arch/arm/lib/copy_from_user.S index 56799a165cc..e4fe124aced 100644 --- a/arch/arm/lib/copy_from_user.S +++ b/arch/arm/lib/copy_from_user.S @@ -33,11 +33,15 @@ * Number of bytes NOT copied. */ +#ifndef CONFIG_THUMB2_KERNEL +#define LDR1W_SHIFT 0 +#else +#define LDR1W_SHIFT 1 +#endif +#define STR1W_SHIFT 0 + .macro ldr1w ptr reg abort -100: ldrt \reg, [\ptr], #4 - .section __ex_table, "a" - .long 100b, \abort - .previous + ldrusr \reg, \ptr, 4, abort=\abort .endm .macro ldr4w ptr reg1 reg2 reg3 reg4 abort @@ -53,14 +57,11 @@ .endm .macro ldr1b ptr reg cond=al abort -100: ldr\cond\()bt \reg, [\ptr], #1 - .section __ex_table, "a" - .long 100b, \abort - .previous + ldrusr \reg, \ptr, 1, \cond, abort=\abort .endm .macro str1w ptr reg abort - str \reg, [\ptr], #4 + W(str) \reg, [\ptr], #4 .endm .macro str8w ptr reg1 reg2 reg3 reg4 reg5 reg6 reg7 reg8 abort diff --git a/arch/arm/lib/copy_template.S b/arch/arm/lib/copy_template.S index 139cce64605..805e3f8fb00 100644 --- a/arch/arm/lib/copy_template.S +++ b/arch/arm/lib/copy_template.S @@ -57,6 +57,13 @@ * * Restore registers with the values previously saved with the * 'preserv' macro. Called upon code termination. + * + * LDR1W_SHIFT + * STR1W_SHIFT + * + * Correction to be applied to the "ip" register when branching into + * the ldr1w or str1w instructions (some of these macros may expand to + * than one 32bit instruction in Thumb-2) */ @@ -99,9 +106,15 @@ 5: ands ip, r2, #28 rsb ip, ip, #32 +#if LDR1W_SHIFT > 0 + lsl ip, ip, #LDR1W_SHIFT +#endif addne pc, pc, ip @ C is always clear here b 7f -6: nop +6: + .rept (1 << LDR1W_SHIFT) + W(nop) + .endr ldr1w r1, r3, abort=20f ldr1w r1, r4, abort=20f ldr1w r1, r5, abort=20f @@ -110,9 +123,16 @@ ldr1w r1, r8, abort=20f ldr1w r1, lr, abort=20f +#if LDR1W_SHIFT < STR1W_SHIFT + lsl ip, ip, #STR1W_SHIFT - LDR1W_SHIFT +#elif LDR1W_SHIFT > STR1W_SHIFT + lsr ip, ip, #LDR1W_SHIFT - STR1W_SHIFT +#endif add pc, pc, ip nop - nop + .rept (1 << STR1W_SHIFT) + W(nop) + .endr str1w r0, r3, abort=20f str1w r0, r4, abort=20f str1w r0, r5, abort=20f diff --git a/arch/arm/lib/copy_to_user.S b/arch/arm/lib/copy_to_user.S index 878820f0a32..1a71e158444 100644 --- a/arch/arm/lib/copy_to_user.S +++ b/arch/arm/lib/copy_to_user.S @@ -33,8 +33,15 @@ * Number of bytes NOT copied. */ +#define LDR1W_SHIFT 0 +#ifndef CONFIG_THUMB2_KERNEL +#define STR1W_SHIFT 0 +#else +#define STR1W_SHIFT 1 +#endif + .macro ldr1w ptr reg abort - ldr \reg, [\ptr], #4 + W(ldr) \reg, [\ptr], #4 .endm .macro ldr4w ptr reg1 reg2 reg3 reg4 abort @@ -50,10 +57,7 @@ .endm .macro str1w ptr reg abort -100: strt \reg, [\ptr], #4 - .section __ex_table, "a" - .long 100b, \abort - .previous + strusr \reg, \ptr, 4, abort=\abort .endm .macro str8w ptr reg1 reg2 reg3 reg4 reg5 reg6 reg7 reg8 abort @@ -68,10 +72,7 @@ .endm .macro str1b ptr reg cond=al abort -100: str\cond\()bt \reg, [\ptr], #1 - .section __ex_table, "a" - .long 100b, \abort - .previous + strusr \reg, \ptr, 1, \cond, abort=\abort .endm .macro enter reg1 reg2 diff --git a/arch/arm/lib/csumpartialcopyuser.S b/arch/arm/lib/csumpartialcopyuser.S index 14677fb4b0c..fd0e9dcd9fd 100644 --- a/arch/arm/lib/csumpartialcopyuser.S +++ b/arch/arm/lib/csumpartialcopyuser.S @@ -26,50 +26,28 @@ .endm .macro load1b, reg1 -9999: ldrbt \reg1, [r0], $1 - .section __ex_table, "a" - .align 3 - .long 9999b, 6001f - .previous + ldrusr \reg1, r0, 1 .endm .macro load2b, reg1, reg2 -9999: ldrbt \reg1, [r0], $1 -9998: ldrbt \reg2, [r0], $1 - .section __ex_table, "a" - .long 9999b, 6001f - .long 9998b, 6001f - .previous + ldrusr \reg1, r0, 1 + ldrusr \reg2, r0, 1 .endm .macro load1l, reg1 -9999: ldrt \reg1, [r0], $4 - .section __ex_table, "a" - .align 3 - .long 9999b, 6001f - .previous + ldrusr \reg1, r0, 4 .endm .macro load2l, reg1, reg2 -9999: ldrt \reg1, [r0], $4 -9998: ldrt \reg2, [r0], $4 - .section __ex_table, "a" - .long 9999b, 6001f - .long 9998b, 6001f - .previous + ldrusr \reg1, r0, 4 + ldrusr \reg2, r0, 4 .endm .macro load4l, reg1, reg2, reg3, reg4 -9999: ldrt \reg1, [r0], $4 -9998: ldrt \reg2, [r0], $4 -9997: ldrt \reg3, [r0], $4 -9996: ldrt \reg4, [r0], $4 - .section __ex_table, "a" - .long 9999b, 6001f - .long 9998b, 6001f - .long 9997b, 6001f - .long 9996b, 6001f - .previous + ldrusr \reg1, r0, 4 + ldrusr \reg2, r0, 4 + ldrusr \reg3, r0, 4 + ldrusr \reg4, r0, 4 .endm /* @@ -92,14 +70,14 @@ */ .section .fixup,"ax" .align 4 -6001: mov r4, #-EFAULT +9001: mov r4, #-EFAULT ldr r5, [fp, #4] @ *err_ptr str r4, [r5] ldmia sp, {r1, r2} @ retrieve dst, len add r2, r2, r1 mov r0, #0 @ zero the buffer -6002: teq r2, r1 +9002: teq r2, r1 strneb r0, [r1], #1 - bne 6002b + bne 9002b load_regs .previous diff --git a/arch/arm/lib/div64.S b/arch/arm/lib/div64.S index 1425e789ba8..faa7748142d 100644 --- a/arch/arm/lib/div64.S +++ b/arch/arm/lib/div64.S @@ -177,7 +177,9 @@ ENTRY(__do_div64) mov yh, xh, lsr ip mov yl, xl, lsr ip rsb ip, ip, #32 - orr yl, yl, xh, lsl ip + ARM( orr yl, yl, xh, lsl ip ) + THUMB( lsl xh, xh, ip ) + THUMB( orr yl, yl, xh ) mov xh, xl, lsl ip mov xh, xh, lsr ip mov pc, lr diff --git a/arch/arm/lib/findbit.S b/arch/arm/lib/findbit.S index 8c4defc4f3c..1e4cbd4e7be 100644 --- a/arch/arm/lib/findbit.S +++ b/arch/arm/lib/findbit.S @@ -25,7 +25,10 @@ ENTRY(_find_first_zero_bit_le) teq r1, #0 beq 3f mov r2, #0 -1: ldrb r3, [r0, r2, lsr #3] +1: + ARM( ldrb r3, [r0, r2, lsr #3] ) + THUMB( lsr r3, r2, #3 ) + THUMB( ldrb r3, [r0, r3] ) eors r3, r3, #0xff @ invert bits bne .L_found @ any now set - found zero bit add r2, r2, #8 @ next bit pointer @@ -44,7 +47,9 @@ ENTRY(_find_next_zero_bit_le) beq 3b ands ip, r2, #7 beq 1b @ If new byte, goto old routine - ldrb r3, [r0, r2, lsr #3] + ARM( ldrb r3, [r0, r2, lsr #3] ) + THUMB( lsr r3, r2, #3 ) + THUMB( ldrb r3, [r0, r3] ) eor r3, r3, #0xff @ now looking for a 1 bit movs r3, r3, lsr ip @ shift off unused bits bne .L_found @@ -61,7 +66,10 @@ ENTRY(_find_first_bit_le) teq r1, #0 beq 3f mov r2, #0 -1: ldrb r3, [r0, r2, lsr #3] +1: + ARM( ldrb r3, [r0, r2, lsr #3] ) + THUMB( lsr r3, r2, #3 ) + THUMB( ldrb r3, [r0, r3] ) movs r3, r3 bne .L_found @ any now set - found zero bit add r2, r2, #8 @ next bit pointer @@ -80,7 +88,9 @@ ENTRY(_find_next_bit_le) beq 3b ands ip, r2, #7 beq 1b @ If new byte, goto old routine - ldrb r3, [r0, r2, lsr #3] + ARM( ldrb r3, [r0, r2, lsr #3] ) + THUMB( lsr r3, r2, #3 ) + THUMB( ldrb r3, [r0, r3] ) movs r3, r3, lsr ip @ shift off unused bits bne .L_found orr r2, r2, #7 @ if zero, then no bits here @@ -95,7 +105,9 @@ ENTRY(_find_first_zero_bit_be) beq 3f mov r2, #0 1: eor r3, r2, #0x18 @ big endian byte ordering - ldrb r3, [r0, r3, lsr #3] + ARM( ldrb r3, [r0, r3, lsr #3] ) + THUMB( lsr r3, #3 ) + THUMB( ldrb r3, [r0, r3] ) eors r3, r3, #0xff @ invert bits bne .L_found @ any now set - found zero bit add r2, r2, #8 @ next bit pointer @@ -111,7 +123,9 @@ ENTRY(_find_next_zero_bit_be) ands ip, r2, #7 beq 1b @ If new byte, goto old routine eor r3, r2, #0x18 @ big endian byte ordering - ldrb r3, [r0, r3, lsr #3] + ARM( ldrb r3, [r0, r3, lsr #3] ) + THUMB( lsr r3, #3 ) + THUMB( ldrb r3, [r0, r3] ) eor r3, r3, #0xff @ now looking for a 1 bit movs r3, r3, lsr ip @ shift off unused bits bne .L_found @@ -125,7 +139,9 @@ ENTRY(_find_first_bit_be) beq 3f mov r2, #0 1: eor r3, r2, #0x18 @ big endian byte ordering - ldrb r3, [r0, r3, lsr #3] + ARM( ldrb r3, [r0, r3, lsr #3] ) + THUMB( lsr r3, #3 ) + THUMB( ldrb r3, [r0, r3] ) movs r3, r3 bne .L_found @ any now set - found zero bit add r2, r2, #8 @ next bit pointer @@ -141,7 +157,9 @@ ENTRY(_find_next_bit_be) ands ip, r2, #7 beq 1b @ If new byte, goto old routine eor r3, r2, #0x18 @ big endian byte ordering - ldrb r3, [r0, r3, lsr #3] + ARM( ldrb r3, [r0, r3, lsr #3] ) + THUMB( lsr r3, #3 ) + THUMB( ldrb r3, [r0, r3] ) movs r3, r3, lsr ip @ shift off unused bits bne .L_found orr r2, r2, #7 @ if zero, then no bits here diff --git a/arch/arm/lib/getuser.S b/arch/arm/lib/getuser.S index 6763088b760..a1814d92712 100644 --- a/arch/arm/lib/getuser.S +++ b/arch/arm/lib/getuser.S @@ -36,8 +36,13 @@ ENTRY(__get_user_1) ENDPROC(__get_user_1) ENTRY(__get_user_2) +#ifdef CONFIG_THUMB2_KERNEL +2: ldrbt r2, [r0] +3: ldrbt r3, [r0, #1] +#else 2: ldrbt r2, [r0], #1 3: ldrbt r3, [r0] +#endif #ifndef __ARMEB__ orr r2, r2, r3, lsl #8 #else diff --git a/arch/arm/lib/io-writesw-armv4.S b/arch/arm/lib/io-writesw-armv4.S index d6585612c86..ff4f71b579e 100644 --- a/arch/arm/lib/io-writesw-armv4.S +++ b/arch/arm/lib/io-writesw-armv4.S @@ -75,7 +75,10 @@ ENTRY(__raw_writesw) #endif .Loutsw_noalign: - ldr r3, [r1, -r3]! + ARM( ldr r3, [r1, -r3]! ) + THUMB( rsb r3, r3, #0 ) + THUMB( ldr r3, [r1, r3] ) + THUMB( sub r1, r3 ) subcs r2, r2, #1 bcs 2f subs r2, r2, #2 diff --git a/arch/arm/lib/lshrdi3.S b/arch/arm/lib/lshrdi3.S index 99ea338bf87..f83d449141f 100644 --- a/arch/arm/lib/lshrdi3.S +++ b/arch/arm/lib/lshrdi3.S @@ -43,7 +43,9 @@ ENTRY(__aeabi_llsr) rsb ip, r2, #32 movmi al, al, lsr r2 movpl al, ah, lsr r3 - orrmi al, al, ah, lsl ip + ARM( orrmi al, al, ah, lsl ip ) + THUMB( lslmi r3, ah, ip ) + THUMB( orrmi al, al, r3 ) mov ah, ah, lsr r2 mov pc, lr diff --git a/arch/arm/lib/memcpy.S b/arch/arm/lib/memcpy.S index e0d002641d3..a9b9e2287a0 100644 --- a/arch/arm/lib/memcpy.S +++ b/arch/arm/lib/memcpy.S @@ -13,8 +13,11 @@ #include #include +#define LDR1W_SHIFT 0 +#define STR1W_SHIFT 0 + .macro ldr1w ptr reg abort - ldr \reg, [\ptr], #4 + W(ldr) \reg, [\ptr], #4 .endm .macro ldr4w ptr reg1 reg2 reg3 reg4 abort @@ -30,7 +33,7 @@ .endm .macro str1w ptr reg abort - str \reg, [\ptr], #4 + W(str) \reg, [\ptr], #4 .endm .macro str8w ptr reg1 reg2 reg3 reg4 reg5 reg6 reg7 reg8 abort diff --git a/arch/arm/lib/memmove.S b/arch/arm/lib/memmove.S index 12549187088..5025c863713 100644 --- a/arch/arm/lib/memmove.S +++ b/arch/arm/lib/memmove.S @@ -75,24 +75,24 @@ ENTRY(memmove) addne pc, pc, ip @ C is always clear here b 7f 6: nop - ldr r3, [r1, #-4]! - ldr r4, [r1, #-4]! - ldr r5, [r1, #-4]! - ldr r6, [r1, #-4]! - ldr r7, [r1, #-4]! - ldr r8, [r1, #-4]! - ldr lr, [r1, #-4]! + W(ldr) r3, [r1, #-4]! + W(ldr) r4, [r1, #-4]! + W(ldr) r5, [r1, #-4]! + W(ldr) r6, [r1, #-4]! + W(ldr) r7, [r1, #-4]! + W(ldr) r8, [r1, #-4]! + W(ldr) lr, [r1, #-4]! add pc, pc, ip nop nop - str r3, [r0, #-4]! - str r4, [r0, #-4]! - str r5, [r0, #-4]! - str r6, [r0, #-4]! - str r7, [r0, #-4]! - str r8, [r0, #-4]! - str lr, [r0, #-4]! + W(str) r3, [r0, #-4]! + W(str) r4, [r0, #-4]! + W(str) r5, [r0, #-4]! + W(str) r6, [r0, #-4]! + W(str) r7, [r0, #-4]! + W(str) r8, [r0, #-4]! + W(str) lr, [r0, #-4]! CALGN( bcs 2b ) diff --git a/arch/arm/lib/putuser.S b/arch/arm/lib/putuser.S index 864f3c1c4f1..02fedbf07c0 100644 --- a/arch/arm/lib/putuser.S +++ b/arch/arm/lib/putuser.S @@ -37,6 +37,15 @@ ENDPROC(__put_user_1) ENTRY(__put_user_2) mov ip, r2, lsr #8 +#ifdef CONFIG_THUMB2_KERNEL +#ifndef __ARMEB__ +2: strbt r2, [r0] +3: strbt ip, [r0, #1] +#else +2: strbt ip, [r0] +3: strbt r2, [r0, #1] +#endif +#else /* !CONFIG_THUMB2_KERNEL */ #ifndef __ARMEB__ 2: strbt r2, [r0], #1 3: strbt ip, [r0] @@ -44,6 +53,7 @@ ENTRY(__put_user_2) 2: strbt ip, [r0], #1 3: strbt r2, [r0] #endif +#endif /* CONFIG_THUMB2_KERNEL */ mov r0, #0 mov pc, lr ENDPROC(__put_user_2) @@ -55,8 +65,13 @@ ENTRY(__put_user_4) ENDPROC(__put_user_4) ENTRY(__put_user_8) +#ifdef CONFIG_THUMB2_KERNEL +5: strt r2, [r0] +6: strt r3, [r0, #4] +#else 5: strt r2, [r0], #4 6: strt r3, [r0] +#endif mov r0, #0 mov pc, lr ENDPROC(__put_user_8) diff --git a/arch/arm/lib/strncpy_from_user.S b/arch/arm/lib/strncpy_from_user.S index 330373c26dd..1c9814f346c 100644 --- a/arch/arm/lib/strncpy_from_user.S +++ b/arch/arm/lib/strncpy_from_user.S @@ -23,7 +23,7 @@ ENTRY(__strncpy_from_user) mov ip, r1 1: subs r2, r2, #1 -USER( ldrplbt r3, [r1], #1) + ldrusr r3, r1, 1, pl bmi 2f strb r3, [r0], #1 teq r3, #0 diff --git a/arch/arm/lib/strnlen_user.S b/arch/arm/lib/strnlen_user.S index 90bb9d02083..7855b290665 100644 --- a/arch/arm/lib/strnlen_user.S +++ b/arch/arm/lib/strnlen_user.S @@ -23,7 +23,7 @@ ENTRY(__strnlen_user) mov r2, r0 1: -USER( ldrbt r3, [r0], #1) + ldrusr r3, r0, 1 teq r3, #0 beq 2f subs r1, r1, #1 -- cgit v1.2.3 From 07f33a035ddda78095bed64f39db54334776841d Mon Sep 17 00:00:00 2001 From: Catalin Marinas Date: Fri, 24 Jul 2009 12:32:57 +0100 Subject: Thumb-2: Implement the unified VFP support This patch modifies the VFP files for the ARM/Thumb-2 unified assembly syntax. Signed-off-by: Catalin Marinas --- arch/arm/vfp/vfphw.S | 48 ++++++++++++++++++++++++++++++++---------------- 1 file changed, 32 insertions(+), 16 deletions(-) diff --git a/arch/arm/vfp/vfphw.S b/arch/arm/vfp/vfphw.S index 1aeae38725d..66dc2d03b7f 100644 --- a/arch/arm/vfp/vfphw.S +++ b/arch/arm/vfp/vfphw.S @@ -209,40 +209,55 @@ ENDPROC(vfp_save_state) last_VFP_context_address: .word last_VFP_context -ENTRY(vfp_get_float) - add pc, pc, r0, lsl #3 + .macro tbl_branch, base, tmp, shift +#ifdef CONFIG_THUMB2_KERNEL + adr \tmp, 1f + add \tmp, \tmp, \base, lsl \shift + mov pc, \tmp +#else + add pc, pc, \base, lsl \shift mov r0, r0 +#endif +1: + .endm + +ENTRY(vfp_get_float) + tbl_branch r0, r3, #3 .irp dr,0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15 - mrc p10, 0, r0, c\dr, c0, 0 @ fmrs r0, s0 +1: mrc p10, 0, r0, c\dr, c0, 0 @ fmrs r0, s0 mov pc, lr - mrc p10, 0, r0, c\dr, c0, 4 @ fmrs r0, s1 + .org 1b + 8 +1: mrc p10, 0, r0, c\dr, c0, 4 @ fmrs r0, s1 mov pc, lr + .org 1b + 8 .endr ENDPROC(vfp_get_float) ENTRY(vfp_put_float) - add pc, pc, r1, lsl #3 - mov r0, r0 + tbl_branch r1, r3, #3 .irp dr,0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15 - mcr p10, 0, r0, c\dr, c0, 0 @ fmsr r0, s0 +1: mcr p10, 0, r0, c\dr, c0, 0 @ fmsr r0, s0 mov pc, lr - mcr p10, 0, r0, c\dr, c0, 4 @ fmsr r0, s1 + .org 1b + 8 +1: mcr p10, 0, r0, c\dr, c0, 4 @ fmsr r0, s1 mov pc, lr + .org 1b + 8 .endr ENDPROC(vfp_put_float) ENTRY(vfp_get_double) - add pc, pc, r0, lsl #3 - mov r0, r0 + tbl_branch r0, r3, #3 .irp dr,0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15 - fmrrd r0, r1, d\dr +1: fmrrd r0, r1, d\dr mov pc, lr + .org 1b + 8 .endr #ifdef CONFIG_VFPv3 @ d16 - d31 registers .irp dr,0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15 - mrrc p11, 3, r0, r1, c\dr @ fmrrd r0, r1, d\dr +1: mrrc p11, 3, r0, r1, c\dr @ fmrrd r0, r1, d\dr mov pc, lr + .org 1b + 8 .endr #endif @@ -253,17 +268,18 @@ ENTRY(vfp_get_double) ENDPROC(vfp_get_double) ENTRY(vfp_put_double) - add pc, pc, r2, lsl #3 - mov r0, r0 + tbl_branch r2, r3, #3 .irp dr,0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15 - fmdrr d\dr, r0, r1 +1: fmdrr d\dr, r0, r1 mov pc, lr + .org 1b + 8 .endr #ifdef CONFIG_VFPv3 @ d16 - d31 registers .irp dr,0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15 - mcrr p11, 3, r1, r2, c\dr @ fmdrr r1, r2, d\dr +1: mcrr p11, 3, r1, r2, c\dr @ fmdrr r1, r2, d\dr mov pc, lr + .org 1b + 8 .endr #endif ENDPROC(vfp_put_double) -- cgit v1.2.3 From 0e056f20f18d0efa5da920f3cf8532adc56d5779 Mon Sep 17 00:00:00 2001 From: Catalin Marinas Date: Fri, 24 Jul 2009 12:32:58 +0100 Subject: Thumb-2: Implement the unified boot code This patch adds the ARM/Thumb-2 unified support for the arch/arm/boot/* files. Signed-off-by: Catalin Marinas --- arch/arm/boot/compressed/head.S | 167 ++++++++++++++++++++++++---------------- 1 file changed, 99 insertions(+), 68 deletions(-) diff --git a/arch/arm/boot/compressed/head.S b/arch/arm/boot/compressed/head.S index 82f5fcfd956..bd60e836987 100644 --- a/arch/arm/boot/compressed/head.S +++ b/arch/arm/boot/compressed/head.S @@ -140,7 +140,8 @@ start: tst r2, #3 @ not user? bne not_angel mov r0, #0x17 @ angel_SWIreason_EnterSVC - swi 0x123456 @ angel_SWI_ARM + ARM( swi 0x123456 ) @ angel_SWI_ARM + THUMB( svc 0xab ) @ angel_SWI_THUMB not_angel: mrs r2, cpsr @ turn off interrupts to orr r2, r2, #0xc0 @ prevent angel from running @@ -161,7 +162,9 @@ not_angel: .text adr r0, LC0 - ldmia r0, {r1, r2, r3, r4, r5, r6, ip, sp} + ARM( ldmia r0, {r1, r2, r3, r4, r5, r6, ip, sp} ) + THUMB( ldmia r0, {r1, r2, r3, r4, r5, r6, ip} ) + THUMB( ldr sp, [r0, #28] ) subs r0, r0, r1 @ calculate the delta offset @ if delta is zero, we are @@ -263,22 +266,25 @@ not_relocated: mov r0, #0 * r6 = processor ID * r7 = architecture ID * r8 = atags pointer - * r9-r14 = corrupted + * r9-r12,r14 = corrupted */ add r1, r5, r0 @ end of decompressed kernel adr r2, reloc_start ldr r3, LC1 add r3, r2, r3 -1: ldmia r2!, {r9 - r14} @ copy relocation code - stmia r1!, {r9 - r14} - ldmia r2!, {r9 - r14} - stmia r1!, {r9 - r14} +1: ldmia r2!, {r9 - r12, r14} @ copy relocation code + stmia r1!, {r9 - r12, r14} + ldmia r2!, {r9 - r12, r14} + stmia r1!, {r9 - r12, r14} cmp r2, r3 blo 1b - add sp, r1, #128 @ relocate the stack + mov sp, r1 + add sp, sp, #128 @ relocate the stack bl cache_clean_flush - add pc, r5, r0 @ call relocation code + ARM( add pc, r5, r0 ) @ call relocation code + THUMB( add r12, r5, r0 ) + THUMB( mov pc, r12 ) @ call relocation code /* * We're not in danger of overwriting ourselves. Do this the simple way. @@ -499,6 +505,7 @@ __arm6_mmu_cache_on: mov pc, r12 __common_mmu_cache_on: +#ifndef CONFIG_THUMB2_KERNEL #ifndef DEBUG orr r0, r0, #0x000d @ Write buffer, mmu #endif @@ -510,6 +517,7 @@ __common_mmu_cache_on: 1: mcr p15, 0, r0, c1, c0, 0 @ load control register mrc p15, 0, r0, c1, c0, 0 @ and read it back to sub pc, lr, r0, lsr #32 @ properly flush pipeline +#endif /* * All code following this line is relocatable. It is relocated by @@ -523,7 +531,7 @@ __common_mmu_cache_on: * r6 = processor ID * r7 = architecture ID * r8 = atags pointer - * r9-r14 = corrupted + * r9-r12,r14 = corrupted */ .align 5 reloc_start: add r9, r5, r0 @@ -532,13 +540,14 @@ reloc_start: add r9, r5, r0 mov r1, r4 1: .rept 4 - ldmia r5!, {r0, r2, r3, r10 - r14} @ relocate kernel - stmia r1!, {r0, r2, r3, r10 - r14} + ldmia r5!, {r0, r2, r3, r10 - r12, r14} @ relocate kernel + stmia r1!, {r0, r2, r3, r10 - r12, r14} .endr cmp r5, r9 blo 1b - add sp, r1, #128 @ relocate the stack + mov sp, r1 + add sp, sp, #128 @ relocate the stack debug_reloc_end call_kernel: bl cache_clean_flush @@ -572,7 +581,9 @@ call_cache_fn: adr r12, proc_types ldr r2, [r12, #4] @ get mask eor r1, r1, r6 @ (real ^ match) tst r1, r2 @ & mask - addeq pc, r12, r3 @ call cache function + ARM( addeq pc, r12, r3 ) @ call cache function + THUMB( addeq r12, r3 ) + THUMB( moveq pc, r12 ) @ call cache function add r12, r12, #4*5 b 1b @@ -595,9 +606,10 @@ call_cache_fn: adr r12, proc_types proc_types: .word 0x41560600 @ ARM6/610 .word 0xffffffe0 - b __arm6_mmu_cache_off @ works, but slow - b __arm6_mmu_cache_off + W(b) __arm6_mmu_cache_off @ works, but slow + W(b) __arm6_mmu_cache_off mov pc, lr + THUMB( nop ) @ b __arm6_mmu_cache_on @ untested @ b __arm6_mmu_cache_off @ b __armv3_mmu_cache_flush @@ -605,76 +617,84 @@ proc_types: .word 0x00000000 @ old ARM ID .word 0x0000f000 mov pc, lr + THUMB( nop ) mov pc, lr + THUMB( nop ) mov pc, lr + THUMB( nop ) .word 0x41007000 @ ARM7/710 .word 0xfff8fe00 - b __arm7_mmu_cache_off - b __arm7_mmu_cache_off + W(b) __arm7_mmu_cache_off + W(b) __arm7_mmu_cache_off mov pc, lr + THUMB( nop ) .word 0x41807200 @ ARM720T (writethrough) .word 0xffffff00 - b __armv4_mmu_cache_on - b __armv4_mmu_cache_off + W(b) __armv4_mmu_cache_on + W(b) __armv4_mmu_cache_off mov pc, lr + THUMB( nop ) .word 0x41007400 @ ARM74x .word 0xff00ff00 - b __armv3_mpu_cache_on - b __armv3_mpu_cache_off - b __armv3_mpu_cache_flush + W(b) __armv3_mpu_cache_on + W(b) __armv3_mpu_cache_off + W(b) __armv3_mpu_cache_flush .word 0x41009400 @ ARM94x .word 0xff00ff00 - b __armv4_mpu_cache_on - b __armv4_mpu_cache_off - b __armv4_mpu_cache_flush + W(b) __armv4_mpu_cache_on + W(b) __armv4_mpu_cache_off + W(b) __armv4_mpu_cache_flush .word 0x00007000 @ ARM7 IDs .word 0x0000f000 mov pc, lr + THUMB( nop ) mov pc, lr + THUMB( nop ) mov pc, lr + THUMB( nop ) @ Everything from here on will be the new ID system. .word 0x4401a100 @ sa110 / sa1100 .word 0xffffffe0 - b __armv4_mmu_cache_on - b __armv4_mmu_cache_off - b __armv4_mmu_cache_flush + W(b) __armv4_mmu_cache_on + W(b) __armv4_mmu_cache_off + W(b) __armv4_mmu_cache_flush .word 0x6901b110 @ sa1110 .word 0xfffffff0 - b __armv4_mmu_cache_on - b __armv4_mmu_cache_off - b __armv4_mmu_cache_flush + W(b) __armv4_mmu_cache_on + W(b) __armv4_mmu_cache_off + W(b) __armv4_mmu_cache_flush .word 0x56056930 .word 0xff0ffff0 @ PXA935 - b __armv4_mmu_cache_on - b __armv4_mmu_cache_off - b __armv4_mmu_cache_flush + W(b) __armv4_mmu_cache_on + W(b) __armv4_mmu_cache_off + W(b) __armv4_mmu_cache_flush .word 0x56158000 @ PXA168 .word 0xfffff000 - b __armv4_mmu_cache_on - b __armv4_mmu_cache_off - b __armv5tej_mmu_cache_flush + W(b) __armv4_mmu_cache_on + W(b) __armv4_mmu_cache_off + W(b) __armv5tej_mmu_cache_flush .word 0x56056930 .word 0xff0ffff0 @ PXA935 - b __armv4_mmu_cache_on - b __armv4_mmu_cache_off - b __armv4_mmu_cache_flush + W(b) __armv4_mmu_cache_on + W(b) __armv4_mmu_cache_off + W(b) __armv4_mmu_cache_flush .word 0x56050000 @ Feroceon .word 0xff0f0000 - b __armv4_mmu_cache_on - b __armv4_mmu_cache_off - b __armv5tej_mmu_cache_flush + W(b) __armv4_mmu_cache_on + W(b) __armv4_mmu_cache_off + W(b) __armv5tej_mmu_cache_flush #ifdef CONFIG_CPU_FEROCEON_OLD_ID /* this conflicts with the standard ARMv5TE entry */ @@ -687,47 +707,50 @@ proc_types: .word 0x66015261 @ FA526 .word 0xff01fff1 - b __fa526_cache_on - b __armv4_mmu_cache_off - b __fa526_cache_flush + W(b) __fa526_cache_on + W(b) __armv4_mmu_cache_off + W(b) __fa526_cache_flush @ These match on the architecture ID .word 0x00020000 @ ARMv4T .word 0x000f0000 - b __armv4_mmu_cache_on - b __armv4_mmu_cache_off - b __armv4_mmu_cache_flush + W(b) __armv4_mmu_cache_on + W(b) __armv4_mmu_cache_off + W(b) __armv4_mmu_cache_flush .word 0x00050000 @ ARMv5TE .word 0x000f0000 - b __armv4_mmu_cache_on - b __armv4_mmu_cache_off - b __armv4_mmu_cache_flush + W(b) __armv4_mmu_cache_on + W(b) __armv4_mmu_cache_off + W(b) __armv4_mmu_cache_flush .word 0x00060000 @ ARMv5TEJ .word 0x000f0000 - b __armv4_mmu_cache_on - b __armv4_mmu_cache_off - b __armv5tej_mmu_cache_flush + W(b) __armv4_mmu_cache_on + W(b) __armv4_mmu_cache_off + W(b) __armv4_mmu_cache_flush .word 0x0007b000 @ ARMv6 .word 0x000ff000 - b __armv4_mmu_cache_on - b __armv4_mmu_cache_off - b __armv6_mmu_cache_flush + W(b) __armv4_mmu_cache_on + W(b) __armv4_mmu_cache_off + W(b) __armv6_mmu_cache_flush .word 0x000f0000 @ new CPU Id .word 0x000f0000 - b __armv7_mmu_cache_on - b __armv7_mmu_cache_off - b __armv7_mmu_cache_flush + W(b) __armv7_mmu_cache_on + W(b) __armv7_mmu_cache_off + W(b) __armv7_mmu_cache_flush .word 0 @ unrecognised type .word 0 mov pc, lr + THUMB( nop ) mov pc, lr + THUMB( nop ) mov pc, lr + THUMB( nop ) .size proc_types, . - proc_types @@ -854,7 +877,7 @@ __armv7_mmu_cache_flush: b iflush hierarchical: mcr p15, 0, r10, c7, c10, 5 @ DMB - stmfd sp!, {r0-r5, r7, r9, r11} + stmfd sp!, {r0-r7, r9-r11} mrc p15, 1, r0, c0, c0, 1 @ read clidr ands r3, r0, #0x7000000 @ extract loc from clidr mov r3, r3, lsr #23 @ left align loc bit field @@ -879,8 +902,12 @@ loop1: loop2: mov r9, r4 @ create working copy of max way size loop3: - orr r11, r10, r9, lsl r5 @ factor way and cache number into r11 - orr r11, r11, r7, lsl r2 @ factor index number into r11 + ARM( orr r11, r10, r9, lsl r5 ) @ factor way and cache number into r11 + ARM( orr r11, r11, r7, lsl r2 ) @ factor index number into r11 + THUMB( lsl r6, r9, r5 ) + THUMB( orr r11, r10, r6 ) @ factor way and cache number into r11 + THUMB( lsl r6, r7, r2 ) + THUMB( orr r11, r11, r6 ) @ factor index number into r11 mcr p15, 0, r11, c7, c14, 2 @ clean & invalidate by set/way subs r9, r9, #1 @ decrement the way bge loop3 @@ -891,7 +918,7 @@ skip: cmp r3, r10 bgt loop1 finished: - ldmfd sp!, {r0-r5, r7, r9, r11} + ldmfd sp!, {r0-r7, r9-r11} mov r10, #0 @ swith back to cache level 0 mcr p15, 2, r10, c0, c0, 0 @ select current cache level in cssr iflush: @@ -925,9 +952,13 @@ __armv4_mmu_cache_flush: mov r11, #8 mov r11, r11, lsl r3 @ cache line size in bytes no_cache_id: - bic r1, pc, #63 @ align to longest cache line + mov r1, pc + bic r1, r1, #63 @ align to longest cache line add r2, r1, r2 -1: ldr r3, [r1], r11 @ s/w flush D cache +1: + ARM( ldr r3, [r1], r11 ) @ s/w flush D cache + THUMB( ldr r3, [r1] ) @ s/w flush D cache + THUMB( add r1, r1, r11 ) teq r1, r2 bne 1b -- cgit v1.2.3 From adca6dc23bc620ea95392659625200a252b97be3 Mon Sep 17 00:00:00 2001 From: Catalin Marinas Date: Fri, 24 Jul 2009 12:32:59 +0100 Subject: Thumb-2: Add support for loadable modules Modules compiled to Thumb-2 have two additional relocations needing to be resolved at load time, R_ARM_THM_CALL and R_ARM_THM_JUMP24, for BL and B.W instructions. The maximum Thumb-2 addressing range is +/-2^24 (+/-16MB) therefore the MODULES_VADDR macro in asm/memory.h is set to (MODULES_END - 8MB) for the Thumb-2 compiled kernel. Signed-off-by: Catalin Marinas --- arch/arm/include/asm/elf.h | 3 +++ arch/arm/include/asm/memory.h | 6 +++++ arch/arm/kernel/module.c | 53 +++++++++++++++++++++++++++++++++++++++++++ 3 files changed, 62 insertions(+) diff --git a/arch/arm/include/asm/elf.h b/arch/arm/include/asm/elf.h index c207504de84..c3b911ee915 100644 --- a/arch/arm/include/asm/elf.h +++ b/arch/arm/include/asm/elf.h @@ -55,6 +55,9 @@ typedef struct user_fp elf_fpregset_t; #define R_ARM_MOVW_ABS_NC 43 #define R_ARM_MOVT_ABS 44 +#define R_ARM_THM_CALL 10 +#define R_ARM_THM_JUMP24 30 + /* * These are used to set parameters in the core dumps. */ diff --git a/arch/arm/include/asm/memory.h b/arch/arm/include/asm/memory.h index 85763db8744..376be1a6286 100644 --- a/arch/arm/include/asm/memory.h +++ b/arch/arm/include/asm/memory.h @@ -44,7 +44,13 @@ * The module space lives between the addresses given by TASK_SIZE * and PAGE_OFFSET - it must be within 32MB of the kernel text. */ +#ifndef CONFIG_THUMB2_KERNEL #define MODULES_VADDR (PAGE_OFFSET - 16*1024*1024) +#else +/* smaller range for Thumb-2 symbols relocation (2^24)*/ +#define MODULES_VADDR (PAGE_OFFSET - 8*1024*1024) +#endif + #if TASK_SIZE > MODULES_VADDR #error Top of user space clashes with start of module space #endif diff --git a/arch/arm/kernel/module.c b/arch/arm/kernel/module.c index bac03c81489..f28c5e9c51e 100644 --- a/arch/arm/kernel/module.c +++ b/arch/arm/kernel/module.c @@ -102,6 +102,7 @@ apply_relocate(Elf32_Shdr *sechdrs, const char *strtab, unsigned int symindex, unsigned long loc; Elf32_Sym *sym; s32 offset; + u32 upper, lower, sign, j1, j2; offset = ELF32_R_SYM(rel->r_info); if (offset < 0 || offset > (symsec->sh_size / sizeof(Elf32_Sym))) { @@ -184,6 +185,58 @@ apply_relocate(Elf32_Shdr *sechdrs, const char *strtab, unsigned int symindex, (offset & 0x0fff); break; + case R_ARM_THM_CALL: + case R_ARM_THM_JUMP24: + upper = *(u16 *)loc; + lower = *(u16 *)(loc + 2); + + /* + * 25 bit signed address range (Thumb-2 BL and B.W + * instructions): + * S:I1:I2:imm10:imm11:0 + * where: + * S = upper[10] = offset[24] + * I1 = ~(J1 ^ S) = offset[23] + * I2 = ~(J2 ^ S) = offset[22] + * imm10 = upper[9:0] = offset[21:12] + * imm11 = lower[10:0] = offset[11:1] + * J1 = lower[13] + * J2 = lower[11] + */ + sign = (upper >> 10) & 1; + j1 = (lower >> 13) & 1; + j2 = (lower >> 11) & 1; + offset = (sign << 24) | ((~(j1 ^ sign) & 1) << 23) | + ((~(j2 ^ sign) & 1) << 22) | + ((upper & 0x03ff) << 12) | + ((lower & 0x07ff) << 1); + if (offset & 0x01000000) + offset -= 0x02000000; + offset += sym->st_value - loc; + + /* only Thumb addresses allowed (no interworking) */ + if (!(offset & 1) || + offset <= (s32)0xff000000 || + offset >= (s32)0x01000000) { + printk(KERN_ERR + "%s: relocation out of range, section " + "%d reloc %d sym '%s'\n", module->name, + relindex, i, strtab + sym->st_name); + return -ENOEXEC; + } + + sign = (offset >> 24) & 1; + j1 = sign ^ (~(offset >> 23) & 1); + j2 = sign ^ (~(offset >> 22) & 1); + *(u16 *)loc = (u16)((upper & 0xf800) | (sign << 10) | + ((offset >> 12) & 0x03ff)); + *(u16 *)(loc + 2) = (u16)((lower & 0xd000) | + (j1 << 13) | (j2 << 11) | + ((offset >> 1) & 0x07ff)); + upper = *(u16 *)loc; + lower = *(u16 *)(loc + 2); + break; + default: printk(KERN_ERR "%s: unknown relocation: %u\n", module->name, ELF32_R_TYPE(rel->r_info)); -- cgit v1.2.3 From dff2ab16ac53d2e21c1ee5ec72f446d5740d8ca2 Mon Sep 17 00:00:00 2001 From: Catalin Marinas Date: Fri, 24 Jul 2009 12:33:00 +0100 Subject: Thumb-2: Pass a Thumb-2 address to the secondary CPUs to jump to This patch sets bit 0 in the startup address passed to the secondary CPUs so that they branch into Thumb-2 mode. Signed-off-by: Catalin Marinas --- arch/arm/mach-realview/platsmp.c | 18 ++++++------------ 1 file changed, 6 insertions(+), 12 deletions(-) diff --git a/arch/arm/mach-realview/platsmp.c b/arch/arm/mach-realview/platsmp.c index ac0e83f1cc3..a88458b4799 100644 --- a/arch/arm/mach-realview/platsmp.c +++ b/arch/arm/mach-realview/platsmp.c @@ -20,6 +20,7 @@ #include #include #include +#include #include #include @@ -137,26 +138,19 @@ int __cpuinit boot_secondary(unsigned int cpu, struct task_struct *idle) static void __init poke_milo(void) { - extern void secondary_startup(void); - /* nobody is to be released from the pen yet */ pen_release = -1; /* - * write the address of secondary startup into the system-wide - * flags register, then clear the bottom two bits, which is what - * BootMonitor is waiting for + * Write the address of secondary startup into the system-wide flags + * register. The BootMonitor waits for this register to become + * non-zero. */ -#if 1 #define REALVIEW_SYS_FLAGSS_OFFSET 0x30 - __raw_writel(virt_to_phys(realview_secondary_startup), - __io_address(REALVIEW_SYS_BASE) + - REALVIEW_SYS_FLAGSS_OFFSET); #define REALVIEW_SYS_FLAGSC_OFFSET 0x34 - __raw_writel(3, + __raw_writel(BSYM(virt_to_phys(realview_secondary_startup)), __io_address(REALVIEW_SYS_BASE) + - REALVIEW_SYS_FLAGSC_OFFSET); -#endif + REALVIEW_SYS_FLAGSS_OFFSET); mb(); } -- cgit v1.2.3 From e2ed3be7319f2734fcd9c7638888501934c22751 Mon Sep 17 00:00:00 2001 From: Catalin Marinas Date: Fri, 24 Jul 2009 12:33:01 +0100 Subject: Thumb-2: Make the uImage entry an odd number This allows U-Boot to branch to the kernel in Thumb-2 mode via "mov pc, lr". Signed-off-by: Catalin Marinas --- arch/arm/boot/Makefile | 9 ++++++++- 1 file changed, 8 insertions(+), 1 deletion(-) diff --git a/arch/arm/boot/Makefile b/arch/arm/boot/Makefile index da226abce2d..4a590f4113e 100644 --- a/arch/arm/boot/Makefile +++ b/arch/arm/boot/Makefile @@ -61,7 +61,7 @@ endif quiet_cmd_uimage = UIMAGE $@ cmd_uimage = $(CONFIG_SHELL) $(MKIMAGE) -A arm -O linux -T kernel \ - -C none -a $(LOADADDR) -e $(LOADADDR) \ + -C none -a $(LOADADDR) -e $(STARTADDR) \ -n 'Linux-$(KERNELRELEASE)' -d $< $@ ifeq ($(CONFIG_ZBOOT_ROM),y) @@ -70,6 +70,13 @@ else $(obj)/uImage: LOADADDR=$(ZRELADDR) endif +ifeq ($(CONFIG_THUMB2_KERNEL),y) +# Set bit 0 to 1 so that "mov pc, rx" switches to Thumb-2 mode +$(obj)/uImage: STARTADDR=$(shell echo $(LOADADDR) | sed -e "s/.$$/1/") +else +$(obj)/uImage: STARTADDR=$(LOADADDR) +endif + $(obj)/uImage: $(obj)/zImage FORCE $(call if_changed,uimage) @echo ' Image $@ is ready' -- cgit v1.2.3 From 16c79651a5ee1ad7e4fca65a7c5309dfca89ed28 Mon Sep 17 00:00:00 2001 From: Catalin Marinas Date: Fri, 24 Jul 2009 12:33:02 +0100 Subject: Thumb-2: Add Thumb-2 support to the build files This patch adds the necessary entries to the Makefile and Kconfig files for building the Thumb-2 kernel. Signed-off-by: Catalin Marinas --- arch/arm/Kconfig | 12 ++++++++++++ arch/arm/Kconfig.debug | 1 + arch/arm/Makefile | 11 +++++++++-- 3 files changed, 22 insertions(+), 2 deletions(-) diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index da28e7ba608..a36b5a8b123 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -983,6 +983,18 @@ config HZ default AT91_TIMER_HZ if ARCH_AT91 default 100 +config THUMB2_KERNEL + bool "Compile the kernel in Thumb-2 mode" + depends on CPU_V7 && EXPERIMENTAL + select AEABI + select ARM_ASM_UNIFIED + help + By enabling this option, the kernel will be compiled in + Thumb-2 mode. A compiler/assembler that understand the unified + ARM-Thumb syntax is needed. + + If unsure, say N. + config ARM_ASM_UNIFIED bool diff --git a/arch/arm/Kconfig.debug b/arch/arm/Kconfig.debug index a89e4734b8f..1a6f70e5292 100644 --- a/arch/arm/Kconfig.debug +++ b/arch/arm/Kconfig.debug @@ -8,6 +8,7 @@ source "lib/Kconfig.debug" # n, but then RMK will have to kill you ;). config FRAME_POINTER bool + depends on !THUMB2_KERNEL default y if !ARM_UNWIND help If you say N here, the resulting kernel will be slightly smaller and diff --git a/arch/arm/Makefile b/arch/arm/Makefile index 3505572a21e..e150f232458 100644 --- a/arch/arm/Makefile +++ b/arch/arm/Makefile @@ -93,9 +93,16 @@ ifeq ($(CONFIG_ARM_UNWIND),y) CFLAGS_ABI +=-funwind-tables endif +ifeq ($(CONFIG_THUMB2_KERNEL),y) +AFLAGS_AUTOIT :=$(call as-option,-Wa$(comma)-mimplicit-it=thumb,-Wa$(comma)-mauto-it) +AFLAGS_NOWARN :=$(call as-option,-Wa$(comma)-mno-warn-deprecated,-Wa$(comma)-W) +CFLAGS_THUMB2 :=-mthumb $(AFLAGS_AUTOIT) $(AFLAGS_NOWARN) +AFLAGS_THUMB2 :=$(CFLAGS_THUMB2) -Wa$(comma)-mthumb +endif + # Need -Uarm for gcc < 3.x -KBUILD_CFLAGS +=$(CFLAGS_ABI) $(arch-y) $(tune-y) $(call cc-option,-mshort-load-bytes,$(call cc-option,-malignment-traps,)) -msoft-float -Uarm -KBUILD_AFLAGS +=$(CFLAGS_ABI) $(arch-y) $(tune-y) -include asm/unified.h -msoft-float +KBUILD_CFLAGS +=$(CFLAGS_ABI) $(CFLAGS_THUMB2) $(arch-y) $(tune-y) $(call cc-option,-mshort-load-bytes,$(call cc-option,-malignment-traps,)) -msoft-float -Uarm +KBUILD_AFLAGS +=$(CFLAGS_ABI) $(AFLAGS_THUMB2) $(arch-y) $(tune-y) -include asm/unified.h -msoft-float CHECKFLAGS += -D__arm__ -- cgit v1.2.3 From 09529f7a1a010cc364267fc5895a71c3853eb82c Mon Sep 17 00:00:00 2001 From: Catalin Marinas Date: Fri, 24 Jul 2009 12:34:55 +0100 Subject: nommu: Fix the fault processing for the MMU-less case The patch adds the necessary ifdefs around functions that only make sense when the MMU is enabled. Signed-off-by: Catalin Marinas --- arch/arm/mm/fault.c | 22 ++++++++++++++++++++++ 1 file changed, 22 insertions(+) diff --git a/arch/arm/mm/fault.c b/arch/arm/mm/fault.c index 6fdcbb70982..ee01ccae3f5 100644 --- a/arch/arm/mm/fault.c +++ b/arch/arm/mm/fault.c @@ -23,6 +23,7 @@ #include "fault.h" +#ifdef CONFIG_MMU #ifdef CONFIG_KPROBES static inline int notify_page_fault(struct pt_regs *regs, unsigned int fsr) @@ -97,6 +98,10 @@ void show_pte(struct mm_struct *mm, unsigned long addr) printk("\n"); } +#else /* CONFIG_MMU */ +void show_pte(struct mm_struct *mm, unsigned long addr) +{ } +#endif /* CONFIG_MMU */ /* * Oops. The kernel tried to access some page that wasn't present. @@ -171,6 +176,7 @@ void do_bad_area(unsigned long addr, unsigned int fsr, struct pt_regs *regs) __do_kernel_fault(mm, addr, fsr, regs); } +#ifdef CONFIG_MMU #define VM_FAULT_BADMAP 0x010000 #define VM_FAULT_BADACCESS 0x020000 @@ -322,6 +328,13 @@ no_context: __do_kernel_fault(mm, addr, fsr, regs); return 0; } +#else /* CONFIG_MMU */ +static int +do_page_fault(unsigned long addr, unsigned int fsr, struct pt_regs *regs) +{ + return 0; +} +#endif /* CONFIG_MMU */ /* * First Level Translation Fault Handler @@ -340,6 +353,7 @@ no_context: * interrupt or a critical region, and should only copy the information * from the master page table, nothing more. */ +#ifdef CONFIG_MMU static int __kprobes do_translation_fault(unsigned long addr, unsigned int fsr, struct pt_regs *regs) @@ -378,6 +392,14 @@ bad_area: do_bad_area(addr, fsr, regs); return 0; } +#else /* CONFIG_MMU */ +static int +do_translation_fault(unsigned long addr, unsigned int fsr, + struct pt_regs *regs) +{ + return 0; +} +#endif /* CONFIG_MMU */ /* * Some section permission faults need to be handled gracefully. -- cgit v1.2.3 From 9a45f026bb3ba720765d46f62f5c464d3317a8ab Mon Sep 17 00:00:00 2001 From: Catalin Marinas Date: Fri, 24 Jul 2009 12:34:56 +0100 Subject: nommu: Remove the context.id from asm-offsets.c when !MMU There is no MMU context switching on MMU-less systems. Signed-off-by: Catalin Marinas --- arch/arm/include/asm/mmu_context.h | 2 ++ 1 file changed, 2 insertions(+) diff --git a/arch/arm/include/asm/mmu_context.h b/arch/arm/include/asm/mmu_context.h index 263fed05ea3..bcdb9291ef0 100644 --- a/arch/arm/include/asm/mmu_context.h +++ b/arch/arm/include/asm/mmu_context.h @@ -62,8 +62,10 @@ static inline void check_context(struct mm_struct *mm) static inline void check_context(struct mm_struct *mm) { +#ifdef CONFIG_MMU if (unlikely(mm->context.kvm_seq != init_mm.context.kvm_seq)) __check_kvm_seq(mm); +#endif } #define init_new_context(tsk,mm) 0 -- cgit v1.2.3 From 365f7a43497dfdfdc05ca03896a8e22ee6944179 Mon Sep 17 00:00:00 2001 From: Catalin Marinas Date: Fri, 24 Jul 2009 12:34:57 +0100 Subject: nommu: Add MMU-less support for Integrator platforms This patch redefines the IO_ADDRESS macro in include/asm-arm/hardware.h. Signed-off-by: Catalin Marinas --- arch/arm/mach-integrator/include/mach/hardware.h | 4 ++++ arch/arm/mach-integrator/integrator_cp.c | 16 ++++++++-------- 2 files changed, 12 insertions(+), 8 deletions(-) diff --git a/arch/arm/mach-integrator/include/mach/hardware.h b/arch/arm/mach-integrator/include/mach/hardware.h index 1251319ef9a..d795642fad2 100644 --- a/arch/arm/mach-integrator/include/mach/hardware.h +++ b/arch/arm/mach-integrator/include/mach/hardware.h @@ -36,8 +36,12 @@ #define PCIO_BASE PCI_IO_VADDR #define PCIMEM_BASE PCI_MEMORY_VADDR +#ifdef CONFIG_MMU /* macro to get at IO space when running virtually */ #define IO_ADDRESS(x) (((x) >> 4) + IO_BASE) +#else +#define IO_ADDRESS(x) (x) +#endif #define pcibios_assign_all_busses() 1 diff --git a/arch/arm/mach-integrator/integrator_cp.c b/arch/arm/mach-integrator/integrator_cp.c index 4ac04055c2e..452931b2690 100644 --- a/arch/arm/mach-integrator/integrator_cp.c +++ b/arch/arm/mach-integrator/integrator_cp.c @@ -49,14 +49,14 @@ #define INTCP_PA_CLCD_BASE 0xc0000000 -#define INTCP_VA_CIC_BASE 0xf1000040 -#define INTCP_VA_PIC_BASE 0xf1400000 -#define INTCP_VA_SIC_BASE 0xfca00000 +#define INTCP_VA_CIC_BASE IO_ADDRESS(INTEGRATOR_HDR_BASE) + 0x40 +#define INTCP_VA_PIC_BASE IO_ADDRESS(INTEGRATOR_IC_BASE) +#define INTCP_VA_SIC_BASE IO_ADDRESS(0xca000000) #define INTCP_PA_ETH_BASE 0xc8000000 #define INTCP_ETH_SIZE 0x10 -#define INTCP_VA_CTRL_BASE 0xfcb00000 +#define INTCP_VA_CTRL_BASE IO_ADDRESS(0xcb000000) #define INTCP_FLASHPROG 0x04 #define CINTEGRATOR_FLASHPROG_FLVPPEN (1 << 0) #define CINTEGRATOR_FLASHPROG_FLWREN (1 << 1) @@ -121,12 +121,12 @@ static struct map_desc intcp_io_desc[] __initdata = { .length = SZ_4K, .type = MT_DEVICE }, { - .virtual = 0xfca00000, + .virtual = IO_ADDRESS(0xca000000), .pfn = __phys_to_pfn(0xca000000), .length = SZ_4K, .type = MT_DEVICE }, { - .virtual = 0xfcb00000, + .virtual = IO_ADDRESS(0xcb000000), .pfn = __phys_to_pfn(0xcb000000), .length = SZ_4K, .type = MT_DEVICE @@ -394,8 +394,8 @@ static struct platform_device *intcp_devs[] __initdata = { */ static unsigned int mmc_status(struct device *dev) { - unsigned int status = readl(0xfca00004); - writel(8, 0xfcb00008); + unsigned int status = readl(IO_ADDRESS(0xca000000) + 4); + writel(8, IO_ADDRESS(0xcb000000) + 8); return status & 8; } -- cgit v1.2.3 From 5d57795e26c413656725c26bd053dbee3711adee Mon Sep 17 00:00:00 2001 From: Catalin Marinas Date: Fri, 24 Jul 2009 12:34:57 +0100 Subject: nommu: Add MMU-less support for the RealView boards This patch defines the IO_ADDRESS macro for the !CONFIG_MMU case. Signed-off-by: Catalin Marinas --- arch/arm/mach-realview/include/mach/hardware.h | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/arch/arm/mach-realview/include/mach/hardware.h b/arch/arm/mach-realview/include/mach/hardware.h index b42c14f89ac..8a638d15797 100644 --- a/arch/arm/mach-realview/include/mach/hardware.h +++ b/arch/arm/mach-realview/include/mach/hardware.h @@ -25,6 +25,7 @@ #include /* macro to get at IO space when running virtually */ +#ifdef CONFIG_MMU /* * Statically mapped addresses: * @@ -33,6 +34,9 @@ * 1fxx xxxx -> fexx xxxx */ #define IO_ADDRESS(x) (((x) & 0x03ffffff) + 0xfb000000) +#else +#define IO_ADDRESS(x) (x) +#endif #define __io_address(n) __io(IO_ADDRESS(n)) #endif -- cgit v1.2.3 From 68b7f7153fa58df710924fbb79722717d2d16094 Mon Sep 17 00:00:00 2001 From: Paul Brook Date: Fri, 24 Jul 2009 12:34:58 +0100 Subject: nommu: ptrace support The patch below adds ARM ptrace functions to get the process load address. This is required for useful userspace debugging on mmuless systems. These values are obtained by reading magic offsets with PTRACE_PEEKUSR, as on other nommu targets. I picked arbitrary large values for the offsets. Signed-off-by: Paul Brook --- arch/arm/include/asm/ptrace.h | 8 ++++++++ arch/arm/kernel/ptrace.c | 8 +++++++- 2 files changed, 15 insertions(+), 1 deletion(-) diff --git a/arch/arm/include/asm/ptrace.h b/arch/arm/include/asm/ptrace.h index 67b833c9b6b..bbecccda76d 100644 --- a/arch/arm/include/asm/ptrace.h +++ b/arch/arm/include/asm/ptrace.h @@ -82,6 +82,14 @@ #define PSR_ENDSTATE 0 #endif +/* + * These are 'magic' values for PTRACE_PEEKUSR that return info about where a + * process is located in memory. + */ +#define PT_TEXT_ADDR 0x10000 +#define PT_DATA_ADDR 0x10004 +#define PT_TEXT_END_ADDR 0x10008 + #ifndef __ASSEMBLY__ /* diff --git a/arch/arm/kernel/ptrace.c b/arch/arm/kernel/ptrace.c index 89882a1d018..a2ea3854cb3 100644 --- a/arch/arm/kernel/ptrace.c +++ b/arch/arm/kernel/ptrace.c @@ -521,7 +521,13 @@ static int ptrace_read_user(struct task_struct *tsk, unsigned long off, return -EIO; tmp = 0; - if (off < sizeof(struct pt_regs)) + if (off == PT_TEXT_ADDR) + tmp = tsk->mm->start_code; + else if (off == PT_DATA_ADDR) + tmp = tsk->mm->start_data; + else if (off == PT_TEXT_END_ADDR) + tmp = tsk->mm->end_code; + else if (off < sizeof(struct pt_regs)) tmp = get_user_reg(tsk, off >> 2); return put_user(tmp, ret); -- cgit v1.2.3 From 05efde9d04ccc1d66a9d2225527c6ee638baa385 Mon Sep 17 00:00:00 2001 From: Catalin Marinas Date: Fri, 24 Jul 2009 12:34:59 +0100 Subject: nommu: Do not override the CP15 control reg value returned from initfunc The patch removes the "mrc" instruction in head-nommu.S overriding the r0 register containing the value to be written in the CP15 system control register. Signed-off-by: Catalin Marinas --- arch/arm/kernel/head-nommu.S | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) diff --git a/arch/arm/kernel/head-nommu.S b/arch/arm/kernel/head-nommu.S index b16393d2b71..e5dfc2895e2 100644 --- a/arch/arm/kernel/head-nommu.S +++ b/arch/arm/kernel/head-nommu.S @@ -61,7 +61,10 @@ ENDPROC(stext) */ __after_proc_init: #ifdef CONFIG_CPU_CP15 - mrc p15, 0, r0, c1, c0, 0 @ read control reg + /* + * CP15 system control register value returned in r0 from + * the CPU init function. + */ #ifdef CONFIG_ALIGNMENT_TRAP orr r0, r0, #CR_A #else -- cgit v1.2.3 From 3c4279750c7d3f88a0638a44e257d7d8d10732f2 Mon Sep 17 00:00:00 2001 From: "Hyok S. Choi" Date: Fri, 24 Jul 2009 12:35:00 +0100 Subject: nommu: Enables to select noMMU mode MMU option is now selectable. Signed-off-by: Hyok S. Choi --- arch/arm/Kconfig | 11 +++++++---- 1 file changed, 7 insertions(+), 4 deletions(-) diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index a36b5a8b123..dc70660fe6b 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -46,10 +46,6 @@ config GENERIC_CLOCKEVENTS_BROADCAST depends on GENERIC_CLOCKEVENTS default y if SMP && !LOCAL_TIMERS -config MMU - bool - default y - config NO_IOPORT bool @@ -188,6 +184,13 @@ source "kernel/Kconfig.freezer" menu "System Type" +config MMU + bool "MMU-based Paged Memory Management Support" + default y + help + Select if you want MMU-based virtualised addressing space + support by paged memory management. If unsure, say 'Y'. + choice prompt "ARM system type" default ARCH_VERSATILE -- cgit v1.2.3 From 2732f4b6f11689fa08e2db5689fc652d608936b5 Mon Sep 17 00:00:00 2001 From: Catalin Marinas Date: Fri, 24 Jul 2009 12:35:01 +0100 Subject: nommu: Remove the memory_start/end variables from ARM page-nommu.h These variables do not seem to be used anywhere in the kernel. Signed-off-by: Catalin Marinas --- arch/arm/include/asm/page-nommu.h | 3 --- 1 file changed, 3 deletions(-) diff --git a/arch/arm/include/asm/page-nommu.h b/arch/arm/include/asm/page-nommu.h index 3574c0deb37..d1b162a18dc 100644 --- a/arch/arm/include/asm/page-nommu.h +++ b/arch/arm/include/asm/page-nommu.h @@ -43,7 +43,4 @@ typedef unsigned long pgprot_t; #define __pmd(x) (x) #define __pgprot(x) (x) -extern unsigned long memory_start; -extern unsigned long memory_end; - #endif -- cgit v1.2.3 From ab6494f0c96f8953c7ad3e35301b2de2db3add57 Mon Sep 17 00:00:00 2001 From: Catalin Marinas Date: Fri, 24 Jul 2009 12:35:02 +0100 Subject: nommu: Add noMMU support to the DMA API Signed-off-by: Catalin Marinas --- arch/arm/mm/dma-mapping.c | 94 ++++++++++++++++++++++++++++++++++++----------- 1 file changed, 72 insertions(+), 22 deletions(-) diff --git a/arch/arm/mm/dma-mapping.c b/arch/arm/mm/dma-mapping.c index 510c179b0ac..b30925fcbcd 100644 --- a/arch/arm/mm/dma-mapping.c +++ b/arch/arm/mm/dma-mapping.c @@ -36,7 +36,34 @@ #define CONSISTENT_PTE_INDEX(x) (((unsigned long)(x) - CONSISTENT_BASE) >> PGDIR_SHIFT) #define NUM_CONSISTENT_PTES (CONSISTENT_DMA_SIZE >> PGDIR_SHIFT) +static u64 get_coherent_dma_mask(struct device *dev) +{ + u64 mask = ISA_DMA_THRESHOLD; + + if (dev) { + mask = dev->coherent_dma_mask; + + /* + * Sanity check the DMA mask - it must be non-zero, and + * must be able to be satisfied by a DMA allocation. + */ + if (mask == 0) { + dev_warn(dev, "coherent DMA mask is unset\n"); + return 0; + } + + if ((~mask) & ISA_DMA_THRESHOLD) { + dev_warn(dev, "coherent DMA mask %#llx is smaller " + "than system GFP_DMA mask %#llx\n", + mask, (unsigned long long)ISA_DMA_THRESHOLD); + return 0; + } + } + return mask; +} + +#ifdef CONFIG_MMU /* * These are the page tables (2MB each) covering uncached, DMA consistent allocations */ @@ -152,7 +179,8 @@ __dma_alloc(struct device *dev, size_t size, dma_addr_t *handle, gfp_t gfp, struct page *page; struct arm_vm_region *c; unsigned long order; - u64 mask = ISA_DMA_THRESHOLD, limit; + u64 mask = get_coherent_dma_mask(dev); + u64 limit; if (!consistent_pte[0]) { printk(KERN_ERR "%s: not initialised\n", __func__); @@ -160,25 +188,8 @@ __dma_alloc(struct device *dev, size_t size, dma_addr_t *handle, gfp_t gfp, return NULL; } - if (dev) { - mask = dev->coherent_dma_mask; - - /* - * Sanity check the DMA mask - it must be non-zero, and - * must be able to be satisfied by a DMA allocation. - */ - if (mask == 0) { - dev_warn(dev, "coherent DMA mask is unset\n"); - goto no_page; - } - - if ((~mask) & ISA_DMA_THRESHOLD) { - dev_warn(dev, "coherent DMA mask %#llx is smaller " - "than system GFP_DMA mask %#llx\n", - mask, (unsigned long long)ISA_DMA_THRESHOLD); - goto no_page; - } - } + if (!mask) + goto no_page; /* * Sanity check the allocation size. @@ -267,6 +278,31 @@ __dma_alloc(struct device *dev, size_t size, dma_addr_t *handle, gfp_t gfp, *handle = ~0; return NULL; } +#else /* !CONFIG_MMU */ +static void * +__dma_alloc(struct device *dev, size_t size, dma_addr_t *handle, gfp_t gfp, + pgprot_t prot) +{ + void *virt; + u64 mask = get_coherent_dma_mask(dev); + + if (!mask) + goto error; + + if (mask != 0xffffffff) + gfp |= GFP_DMA; + virt = kmalloc(size, gfp); + if (!virt) + goto error; + + *handle = virt_to_dma(dev, virt); + return virt; + +error: + *handle = ~0; + return NULL; +} +#endif /* CONFIG_MMU */ /* * Allocate DMA-coherent memory space and return both the kernel remapped @@ -311,9 +347,10 @@ EXPORT_SYMBOL(dma_alloc_writecombine); static int dma_mmap(struct device *dev, struct vm_area_struct *vma, void *cpu_addr, dma_addr_t dma_addr, size_t size) { + int ret = -ENXIO; +#ifdef CONFIG_MMU unsigned long flags, user_size, kern_size; struct arm_vm_region *c; - int ret = -ENXIO; user_size = (vma->vm_end - vma->vm_start) >> PAGE_SHIFT; @@ -334,6 +371,7 @@ static int dma_mmap(struct device *dev, struct vm_area_struct *vma, vma->vm_page_prot); } } +#endif /* CONFIG_MMU */ return ret; } @@ -358,6 +396,7 @@ EXPORT_SYMBOL(dma_mmap_writecombine); * free a page as defined by the above mapping. * Must not be called with IRQs disabled. */ +#ifdef CONFIG_MMU void dma_free_coherent(struct device *dev, size_t size, void *cpu_addr, dma_addr_t handle) { struct arm_vm_region *c; @@ -444,6 +483,14 @@ void dma_free_coherent(struct device *dev, size_t size, void *cpu_addr, dma_addr __func__, cpu_addr); dump_stack(); } +#else /* !CONFIG_MMU */ +void dma_free_coherent(struct device *dev, size_t size, void *cpu_addr, dma_addr_t handle) +{ + if (dma_release_from_coherent(dev, get_order(size), cpu_addr)) + return; + kfree(cpu_addr); +} +#endif /* CONFIG_MMU */ EXPORT_SYMBOL(dma_free_coherent); /* @@ -451,10 +498,12 @@ EXPORT_SYMBOL(dma_free_coherent); */ static int __init consistent_init(void) { + int ret = 0; +#ifdef CONFIG_MMU pgd_t *pgd; pmd_t *pmd; pte_t *pte; - int ret = 0, i = 0; + int i = 0; u32 base = CONSISTENT_BASE; do { @@ -477,6 +526,7 @@ static int __init consistent_init(void) consistent_pte[i++] = pte; base += (1 << PGDIR_SHIFT); } while (base < CONSISTENT_END); +#endif /* !CONFIG_MMU */ return ret; } -- cgit v1.2.3 From b32f3afe3c5c4ddd1c414d41845470a99c88475f Mon Sep 17 00:00:00 2001 From: Catalin Marinas Date: Fri, 24 Jul 2009 12:35:03 +0100 Subject: nommu: Include asm/setup.h in arch/arm/mm/nommu.c This is needed for the struct meminfo definition. Signed-off-by: Catalin Marinas --- arch/arm/mm/nommu.c | 1 + 1 file changed, 1 insertion(+) diff --git a/arch/arm/mm/nommu.c b/arch/arm/mm/nommu.c index ad7bacc693b..900811cc913 100644 --- a/arch/arm/mm/nommu.c +++ b/arch/arm/mm/nommu.c @@ -12,6 +12,7 @@ #include #include #include +#include #include #include "mm.h" -- cgit v1.2.3 From 8b79d5f217d7fc7d6b85ee5b10899f2bd20b64ed Mon Sep 17 00:00:00 2001 From: Catalin Marinas Date: Fri, 24 Jul 2009 12:35:04 +0100 Subject: nommu: Add #ifdef CONFIG_MMU around the PTE sanity checks Signed-off-by: Catalin Marinas --- arch/arm/mm/proc-macros.S | 2 ++ 1 file changed, 2 insertions(+) diff --git a/arch/arm/mm/proc-macros.S b/arch/arm/mm/proc-macros.S index 54b1f721dec..f1559c22778 100644 --- a/arch/arm/mm/proc-macros.S +++ b/arch/arm/mm/proc-macros.S @@ -77,6 +77,7 @@ * Sanity check the PTE configuration for the code below - which makes * certain assumptions about how these bits are layed out. */ +#ifdef CONFIG_MMU #if L_PTE_SHARED != PTE_EXT_SHARED #error PTE shared bit mismatch #endif @@ -90,6 +91,7 @@ L_PTE_FILE+L_PTE_PRESENT) > L_PTE_SHARED #error Invalid Linux PTE bit settings #endif +#endif /* CONFIG_MMU */ /* * The ARMv6 and ARMv7 set_pte_ext translation function. -- cgit v1.2.3 From 0e0fe9219d2e5426d87a0f62db445010d4aba2c7 Mon Sep 17 00:00:00 2001 From: Catalin Marinas Date: Fri, 24 Jul 2009 12:35:05 +0100 Subject: nommu: Do not allow REALVIEW_HIGH_PHYS_OFFSET if !MMU Signed-off-by: Catalin Marinas --- arch/arm/mach-realview/Kconfig | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm/mach-realview/Kconfig b/arch/arm/mach-realview/Kconfig index d4cfa214538..dfc9b0bc6eb 100644 --- a/arch/arm/mach-realview/Kconfig +++ b/arch/arm/mach-realview/Kconfig @@ -75,7 +75,7 @@ config MACH_REALVIEW_PBX config REALVIEW_HIGH_PHYS_OFFSET bool "High physical base address for the RealView platform" - depends on !MACH_REALVIEW_PB1176 + depends on MMU && !MACH_REALVIEW_PB1176 default y help RealView boards other than PB1176 have the RAM available at -- cgit v1.2.3 From 8bdca0ac2b1ec35091941c57b4202f7096291c5b Mon Sep 17 00:00:00 2001 From: Catalin Marinas Date: Fri, 24 Jul 2009 12:35:06 +0100 Subject: nommu: Fix compressed/head.S to not perform MMU specific operations Signed-off-by: Catalin Marinas --- arch/arm/boot/compressed/head.S | 14 ++++++++++++++ 1 file changed, 14 insertions(+) diff --git a/arch/arm/boot/compressed/head.S b/arch/arm/boot/compressed/head.S index bd60e836987..fa6fbf45cf3 100644 --- a/arch/arm/boot/compressed/head.S +++ b/arch/arm/boot/compressed/head.S @@ -438,6 +438,7 @@ ENDPROC(__setup_mmu) __armv4_mmu_cache_on: mov r12, lr +#ifdef CONFIG_MMU bl __setup_mmu mov r0, #0 mcr p15, 0, r0, c7, c10, 4 @ drain write buffer @@ -451,10 +452,12 @@ __armv4_mmu_cache_on: bl __common_mmu_cache_on mov r0, #0 mcr p15, 0, r0, c8, c7, 0 @ flush I,D TLBs +#endif mov pc, r12 __armv7_mmu_cache_on: mov r12, lr +#ifdef CONFIG_MMU mrc p15, 0, r11, c0, c1, 4 @ read ID_MMFR0 tst r11, #0xf @ VMSA blne __setup_mmu @@ -462,9 +465,11 @@ __armv7_mmu_cache_on: mcr p15, 0, r0, c7, c10, 4 @ drain write buffer tst r11, #0xf @ VMSA mcrne p15, 0, r0, c8, c7, 0 @ flush I,D TLBs +#endif mrc p15, 0, r0, c1, c0, 0 @ read control reg orr r0, r0, #0x5000 @ I-cache enable, RR cache replacement orr r0, r0, #0x003c @ write buffer +#ifdef CONFIG_MMU #ifdef CONFIG_CPU_ENDIAN_BE8 orr r0, r0, #1 << 25 @ big-endian page tables #endif @@ -472,6 +477,7 @@ __armv7_mmu_cache_on: movne r1, #-1 mcrne p15, 0, r3, c2, c0, 0 @ load page table pointer mcrne p15, 0, r1, c3, c0, 0 @ load domain access control +#endif mcr p15, 0, r0, c1, c0, 0 @ load control register mrc p15, 0, r0, c1, c0, 0 @ and read it back mov r0, #0 @@ -785,22 +791,30 @@ __armv3_mpu_cache_off: mov pc, lr __armv4_mmu_cache_off: +#ifdef CONFIG_MMU mrc p15, 0, r0, c1, c0 bic r0, r0, #0x000d mcr p15, 0, r0, c1, c0 @ turn MMU and cache off mov r0, #0 mcr p15, 0, r0, c7, c7 @ invalidate whole cache v4 mcr p15, 0, r0, c8, c7 @ invalidate whole TLB v4 +#endif mov pc, lr __armv7_mmu_cache_off: mrc p15, 0, r0, c1, c0 +#ifdef CONFIG_MMU bic r0, r0, #0x000d +#else + bic r0, r0, #0x000c +#endif mcr p15, 0, r0, c1, c0 @ turn MMU and cache off mov r12, lr bl __armv7_mmu_cache_flush mov r0, #0 +#ifdef CONFIG_MMU mcr p15, 0, r0, c8, c7, 0 @ invalidate whole TLB +#endif mcr p15, 0, r0, c7, c5, 6 @ invalidate BTC mcr p15, 0, r0, c7, c10, 4 @ DSB mcr p15, 0, r0, c7, c5, 4 @ ISB -- cgit v1.2.3 From bdaaaec39792ee0035d6c5a5ad2520991e090a3c Mon Sep 17 00:00:00 2001 From: Catalin Marinas Date: Fri, 24 Jul 2009 12:35:06 +0100 Subject: nommu: Do not set PRRR and NMRR in proc-v7.S if !MMU ARMv7-R profile CPUs do not have these registers. Signed-off-by: Catalin Marinas --- arch/arm/mm/proc-v7.S | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm/mm/proc-v7.S b/arch/arm/mm/proc-v7.S index c19aecdb202..f3fa1c32fe9 100644 --- a/arch/arm/mm/proc-v7.S +++ b/arch/arm/mm/proc-v7.S @@ -234,7 +234,6 @@ __v7_setup: mcr p15, 0, r4, c2, c0, 1 @ load TTB1 mov r10, #0x1f @ domains 0, 1 = manager mcr p15, 0, r10, c3, c0, 0 @ load domain access register -#endif /* * Memory region attributes with SCTLR.TRE=1 * @@ -267,6 +266,7 @@ __v7_setup: ldr r6, =0x40e040e0 @ NMRR mcr p15, 0, r5, c10, c2, 0 @ write PRRR mcr p15, 0, r6, c10, c2, 1 @ write NMRR +#endif adr r5, v7_crval ldmia r5, {r5, r6} #ifdef CONFIG_CPU_ENDIAN_BE8 -- cgit v1.2.3 From 412bb0a6224f96661c042a109c4978649c00ed52 Mon Sep 17 00:00:00 2001 From: Catalin Marinas Date: Fri, 24 Jul 2009 12:37:09 +0100 Subject: Include linux/sched.h in arch/arm/mm/fault.c When building with !MMU, task_struct is not defined. Just include the relevant file. Signed-off-by: Catalin Marinas --- arch/arm/mm/fault.c | 1 + 1 file changed, 1 insertion(+) diff --git a/arch/arm/mm/fault.c b/arch/arm/mm/fault.c index ee01ccae3f5..556c8daf087 100644 --- a/arch/arm/mm/fault.c +++ b/arch/arm/mm/fault.c @@ -16,6 +16,7 @@ #include #include #include +#include #include #include -- cgit v1.2.3 From 963030817060e4f109be1993b9ae8f81dbf5e11a Mon Sep 17 00:00:00 2001 From: Josef Bacik Date: Mon, 13 Jul 2009 21:29:25 -0400 Subject: Btrfs: use hybrid extents+bitmap rb tree for free space Currently btrfs has a problem where it can use a ridiculous amount of RAM simply tracking free space. As free space gets fragmented, we end up with thousands of entries on an rb-tree per block group, which usually spans 1 gig of area. Since we currently don't ever flush free space cache back to disk this gets to be a bit unweildly on large fs's with lots of fragmentation. This patch solves this problem by using PAGE_SIZE bitmaps for parts of the free space cache. Initially we calculate a threshold of extent entries we can handle, which is however many extent entries we can cram into 16k of ram. The maximum amount of RAM that should ever be used to track 1 gigabyte of diskspace will be 32k of RAM, which scales much better than we did before. Once we pass the extent threshold, we start adding bitmaps and using those instead for tracking the free space. This patch also makes it so that any free space thats less than 4 * sectorsize we go ahead and put into a bitmap. This is nice since we try and allocate out of the front of a block group, so if the front of a block group is heavily fragmented and then has a huge chunk of free space at the end, we go ahead and add the fragmented areas to bitmaps and use a normal extent entry to track the big chunk at the back of the block group. I've also taken the opportunity to revamp how we search for free space. Previously we indexed free space via an offset indexed rb tree and a bytes indexed rb tree. I've dropped the bytes indexed rb tree and use only the offset indexed rb tree. This cuts the number of tree operations we were doing previously down by half, and gives us a little bit of a better allocation pattern since we will always start from a specific offset and search forward from there, instead of searching for the size we need and try and get it as close as possible to the offset we want. I've given this a healthy amount of testing pre-new format stuff, as well as post-new format stuff. I've booted up my fedora box which is installed on btrfs with this patch and ran with it for a few days without issues. I've not seen any performance regressions in any of my tests. Since the last patch Yan Zheng fixed a problem where we could have overlapping entries, so updating their offset inline would cause problems. Thanks, Signed-off-by: Josef Bacik Signed-off-by: Chris Mason --- fs/btrfs/ctree.h | 8 +- fs/btrfs/extent-tree.c | 25 +- fs/btrfs/free-space-cache.c | 1001 ++++++++++++++++++++++++++++++++++--------- fs/btrfs/free-space-cache.h | 8 + 4 files changed, 826 insertions(+), 216 deletions(-) diff --git a/fs/btrfs/ctree.h b/fs/btrfs/ctree.h index da0763135bf..0cbf3491bb7 100644 --- a/fs/btrfs/ctree.h +++ b/fs/btrfs/ctree.h @@ -709,6 +709,9 @@ struct btrfs_free_cluster { /* first extent starting offset */ u64 window_start; + /* if this cluster simply points at a bitmap in the block group */ + bool points_to_bitmap; + struct btrfs_block_group_cache *block_group; /* * when a cluster is allocated from a block group, we put the @@ -726,6 +729,10 @@ struct btrfs_block_group_cache { u64 pinned; u64 reserved; u64 flags; + u64 sectorsize; + int extents_thresh; + int free_extents; + int total_bitmaps; int cached; int ro; int dirty; @@ -734,7 +741,6 @@ struct btrfs_block_group_cache { /* free space cache stuff */ spinlock_t tree_lock; - struct rb_root free_space_bytes; struct rb_root free_space_offset; /* block group cache stuff */ diff --git a/fs/btrfs/extent-tree.c b/fs/btrfs/extent-tree.c index 62a332d34fd..98697be6bdd 100644 --- a/fs/btrfs/extent-tree.c +++ b/fs/btrfs/extent-tree.c @@ -3649,7 +3649,6 @@ refill_cluster: goto loop; checks: search_start = stripe_align(root, offset); - /* move on to the next group */ if (search_start + num_bytes >= search_end) { btrfs_add_free_space(block_group, offset, num_bytes); @@ -7040,6 +7039,16 @@ int btrfs_read_block_groups(struct btrfs_root *root) mutex_init(&cache->cache_mutex); INIT_LIST_HEAD(&cache->list); INIT_LIST_HEAD(&cache->cluster_list); + cache->sectorsize = root->sectorsize; + + /* + * we only want to have 32k of ram per block group for keeping + * track of free space, and if we pass 1/2 of that we want to + * start converting things over to using bitmaps + */ + cache->extents_thresh = ((1024 * 32) / 2) / + sizeof(struct btrfs_free_space); + read_extent_buffer(leaf, &cache->item, btrfs_item_ptr_offset(leaf, path->slots[0]), sizeof(cache->item)); @@ -7091,6 +7100,15 @@ int btrfs_make_block_group(struct btrfs_trans_handle *trans, cache->key.objectid = chunk_offset; cache->key.offset = size; cache->key.type = BTRFS_BLOCK_GROUP_ITEM_KEY; + cache->sectorsize = root->sectorsize; + + /* + * we only want to have 32k of ram per block group for keeping track + * of free space, and if we pass 1/2 of that we want to start + * converting things over to using bitmaps + */ + cache->extents_thresh = ((1024 * 32) / 2) / + sizeof(struct btrfs_free_space); atomic_set(&cache->count, 1); spin_lock_init(&cache->lock); spin_lock_init(&cache->tree_lock); @@ -7103,6 +7121,11 @@ int btrfs_make_block_group(struct btrfs_trans_handle *trans, cache->flags = type; btrfs_set_block_group_flags(&cache->item, type); + cache->cached = 1; + ret = btrfs_add_free_space(cache, chunk_offset, size); + BUG_ON(ret); + remove_sb_from_cache(root, cache); + ret = update_space_info(root->fs_info, cache->flags, size, bytes_used, &cache->space_info); BUG_ON(ret); diff --git a/fs/btrfs/free-space-cache.c b/fs/btrfs/free-space-cache.c index 4538e48581a..ab8cad8b46c 100644 --- a/fs/btrfs/free-space-cache.c +++ b/fs/btrfs/free-space-cache.c @@ -16,45 +16,46 @@ * Boston, MA 021110-1307, USA. */ +#include #include +#include #include "ctree.h" #include "free-space-cache.h" #include "transaction.h" -struct btrfs_free_space { - struct rb_node bytes_index; - struct rb_node offset_index; - u64 offset; - u64 bytes; -}; +#define BITS_PER_BITMAP (PAGE_CACHE_SIZE * 8) +#define MAX_CACHE_BYTES_PER_GIG (32 * 1024) -static int tree_insert_offset(struct rb_root *root, u64 offset, - struct rb_node *node) +static inline unsigned long offset_to_bit(u64 bitmap_start, u64 sectorsize, + u64 offset) { - struct rb_node **p = &root->rb_node; - struct rb_node *parent = NULL; - struct btrfs_free_space *info; + BUG_ON(offset < bitmap_start); + offset -= bitmap_start; + return (unsigned long)(div64_u64(offset, sectorsize)); +} - while (*p) { - parent = *p; - info = rb_entry(parent, struct btrfs_free_space, offset_index); +static inline unsigned long bytes_to_bits(u64 bytes, u64 sectorsize) +{ + return (unsigned long)(div64_u64(bytes, sectorsize)); +} - if (offset < info->offset) - p = &(*p)->rb_left; - else if (offset > info->offset) - p = &(*p)->rb_right; - else - return -EEXIST; - } +static inline u64 offset_to_bitmap(struct btrfs_block_group_cache *block_group, + u64 offset) +{ + u64 bitmap_start; + u64 bytes_per_bitmap; - rb_link_node(node, parent, p); - rb_insert_color(node, root); + bytes_per_bitmap = BITS_PER_BITMAP * block_group->sectorsize; + bitmap_start = offset - block_group->key.objectid; + bitmap_start = div64_u64(bitmap_start, bytes_per_bitmap); + bitmap_start *= bytes_per_bitmap; + bitmap_start += block_group->key.objectid; - return 0; + return bitmap_start; } -static int tree_insert_bytes(struct rb_root *root, u64 bytes, - struct rb_node *node) +static int tree_insert_offset(struct rb_root *root, u64 offset, + struct rb_node *node, int bitmap) { struct rb_node **p = &root->rb_node; struct rb_node *parent = NULL; @@ -62,12 +63,34 @@ static int tree_insert_bytes(struct rb_root *root, u64 bytes, while (*p) { parent = *p; - info = rb_entry(parent, struct btrfs_free_space, bytes_index); + info = rb_entry(parent, struct btrfs_free_space, offset_index); - if (bytes < info->bytes) + if (offset < info->offset) { p = &(*p)->rb_left; - else + } else if (offset > info->offset) { p = &(*p)->rb_right; + } else { + /* + * we could have a bitmap entry and an extent entry + * share the same offset. If this is the case, we want + * the extent entry to always be found first if we do a + * linear search through the tree, since we want to have + * the quickest allocation time, and allocating from an + * extent is faster than allocating from a bitmap. So + * if we're inserting a bitmap and we find an entry at + * this offset, we want to go right, or after this entry + * logically. If we are inserting an extent and we've + * found a bitmap, we want to go left, or before + * logically. + */ + if (bitmap) { + WARN_ON(info->bitmap); + p = &(*p)->rb_right; + } else { + WARN_ON(!info->bitmap); + p = &(*p)->rb_left; + } + } } rb_link_node(node, parent, p); @@ -79,110 +102,142 @@ static int tree_insert_bytes(struct rb_root *root, u64 bytes, /* * searches the tree for the given offset. * - * fuzzy == 1: this is used for allocations where we are given a hint of where - * to look for free space. Because the hint may not be completely on an offset - * mark, or the hint may no longer point to free space we need to fudge our - * results a bit. So we look for free space starting at or after offset with at - * least bytes size. We prefer to find as close to the given offset as we can. - * Also if the offset is within a free space range, then we will return the free - * space that contains the given offset, which means we can return a free space - * chunk with an offset before the provided offset. - * - * fuzzy == 0: this is just a normal tree search. Give us the free space that - * starts at the given offset which is at least bytes size, and if its not there - * return NULL. + * fuzzy - If this is set, then we are trying to make an allocation, and we just + * want a section that has at least bytes size and comes at or after the given + * offset. */ -static struct btrfs_free_space *tree_search_offset(struct rb_root *root, - u64 offset, u64 bytes, - int fuzzy) +static struct btrfs_free_space * +tree_search_offset(struct btrfs_block_group_cache *block_group, + u64 offset, int bitmap_only, int fuzzy) { - struct rb_node *n = root->rb_node; - struct btrfs_free_space *entry, *ret = NULL; + struct rb_node *n = block_group->free_space_offset.rb_node; + struct btrfs_free_space *entry, *prev = NULL; + + /* find entry that is closest to the 'offset' */ + while (1) { + if (!n) { + entry = NULL; + break; + } - while (n) { entry = rb_entry(n, struct btrfs_free_space, offset_index); + prev = entry; - if (offset < entry->offset) { - if (fuzzy && - (!ret || entry->offset < ret->offset) && - (bytes <= entry->bytes)) - ret = entry; + if (offset < entry->offset) n = n->rb_left; - } else if (offset > entry->offset) { - if (fuzzy && - (entry->offset + entry->bytes - 1) >= offset && - bytes <= entry->bytes) { - ret = entry; - break; - } + else if (offset > entry->offset) n = n->rb_right; - } else { - if (bytes > entry->bytes) { - n = n->rb_right; - continue; - } - ret = entry; + else break; - } } - return ret; -} - -/* - * return a chunk at least bytes size, as close to offset that we can get. - */ -static struct btrfs_free_space *tree_search_bytes(struct rb_root *root, - u64 offset, u64 bytes) -{ - struct rb_node *n = root->rb_node; - struct btrfs_free_space *entry, *ret = NULL; + if (bitmap_only) { + if (!entry) + return NULL; + if (entry->bitmap) + return entry; - while (n) { - entry = rb_entry(n, struct btrfs_free_space, bytes_index); + /* + * bitmap entry and extent entry may share same offset, + * in that case, bitmap entry comes after extent entry. + */ + n = rb_next(n); + if (!n) + return NULL; + entry = rb_entry(n, struct btrfs_free_space, offset_index); + if (entry->offset != offset) + return NULL; - if (bytes < entry->bytes) { + WARN_ON(!entry->bitmap); + return entry; + } else if (entry) { + if (entry->bitmap) { /* - * We prefer to get a hole size as close to the size we - * are asking for so we don't take small slivers out of - * huge holes, but we also want to get as close to the - * offset as possible so we don't have a whole lot of - * fragmentation. + * if previous extent entry covers the offset, + * we should return it instead of the bitmap entry */ - if (offset <= entry->offset) { - if (!ret) - ret = entry; - else if (entry->bytes < ret->bytes) - ret = entry; - else if (entry->offset < ret->offset) - ret = entry; + n = &entry->offset_index; + while (1) { + n = rb_prev(n); + if (!n) + break; + prev = rb_entry(n, struct btrfs_free_space, + offset_index); + if (!prev->bitmap) { + if (prev->offset + prev->bytes > offset) + entry = prev; + break; + } } - n = n->rb_left; - } else if (bytes > entry->bytes) { - n = n->rb_right; + } + return entry; + } + + if (!prev) + return NULL; + + /* find last entry before the 'offset' */ + entry = prev; + if (entry->offset > offset) { + n = rb_prev(&entry->offset_index); + if (n) { + entry = rb_entry(n, struct btrfs_free_space, + offset_index); + BUG_ON(entry->offset > offset); } else { - /* - * Ok we may have multiple chunks of the wanted size, - * so we don't want to take the first one we find, we - * want to take the one closest to our given offset, so - * keep searching just in case theres a better match. - */ - n = n->rb_right; - if (offset > entry->offset) - continue; - else if (!ret || entry->offset < ret->offset) - ret = entry; + if (fuzzy) + return entry; + else + return NULL; } } - return ret; + if (entry->bitmap) { + n = &entry->offset_index; + while (1) { + n = rb_prev(n); + if (!n) + break; + prev = rb_entry(n, struct btrfs_free_space, + offset_index); + if (!prev->bitmap) { + if (prev->offset + prev->bytes > offset) + return prev; + break; + } + } + if (entry->offset + BITS_PER_BITMAP * + block_group->sectorsize > offset) + return entry; + } else if (entry->offset + entry->bytes > offset) + return entry; + + if (!fuzzy) + return NULL; + + while (1) { + if (entry->bitmap) { + if (entry->offset + BITS_PER_BITMAP * + block_group->sectorsize > offset) + break; + } else { + if (entry->offset + entry->bytes > offset) + break; + } + + n = rb_next(&entry->offset_index); + if (!n) + return NULL; + entry = rb_entry(n, struct btrfs_free_space, offset_index); + } + return entry; } static void unlink_free_space(struct btrfs_block_group_cache *block_group, struct btrfs_free_space *info) { rb_erase(&info->offset_index, &block_group->free_space_offset); - rb_erase(&info->bytes_index, &block_group->free_space_bytes); + block_group->free_extents--; } static int link_free_space(struct btrfs_block_group_cache *block_group, @@ -190,17 +245,311 @@ static int link_free_space(struct btrfs_block_group_cache *block_group, { int ret = 0; - - BUG_ON(!info->bytes); + BUG_ON(!info->bitmap && !info->bytes); ret = tree_insert_offset(&block_group->free_space_offset, info->offset, - &info->offset_index); + &info->offset_index, (info->bitmap != NULL)); if (ret) return ret; - ret = tree_insert_bytes(&block_group->free_space_bytes, info->bytes, - &info->bytes_index); - if (ret) - return ret; + block_group->free_extents++; + return ret; +} + +static void recalculate_thresholds(struct btrfs_block_group_cache *block_group) +{ + u64 max_bytes, possible_bytes; + + /* + * The goal is to keep the total amount of memory used per 1gb of space + * at or below 32k, so we need to adjust how much memory we allow to be + * used by extent based free space tracking + */ + max_bytes = MAX_CACHE_BYTES_PER_GIG * + (div64_u64(block_group->key.offset, 1024 * 1024 * 1024)); + + possible_bytes = (block_group->total_bitmaps * PAGE_CACHE_SIZE) + + (sizeof(struct btrfs_free_space) * + block_group->extents_thresh); + + if (possible_bytes > max_bytes) { + int extent_bytes = max_bytes - + (block_group->total_bitmaps * PAGE_CACHE_SIZE); + + if (extent_bytes <= 0) { + block_group->extents_thresh = 0; + return; + } + + block_group->extents_thresh = extent_bytes / + (sizeof(struct btrfs_free_space)); + } +} + +static void bitmap_clear_bits(struct btrfs_free_space *info, u64 offset, u64 bytes, + u64 sectorsize) +{ + unsigned long start, end; + unsigned long i; + + start = offset_to_bit(info->offset, sectorsize, offset); + end = start + bytes_to_bits(bytes, sectorsize); + BUG_ON(end > BITS_PER_BITMAP); + + for (i = start; i < end; i++) + clear_bit(i, info->bitmap); + + info->bytes -= bytes; +} + +static void bitmap_set_bits(struct btrfs_free_space *info, u64 offset, u64 bytes, + u64 sectorsize) +{ + unsigned long start, end; + unsigned long i; + + start = offset_to_bit(info->offset, sectorsize, offset); + end = start + bytes_to_bits(bytes, sectorsize); + BUG_ON(end > BITS_PER_BITMAP); + + for (i = start; i < end; i++) + set_bit(i, info->bitmap); + + info->bytes += bytes; +} + +static int search_bitmap(struct btrfs_block_group_cache *block_group, + struct btrfs_free_space *bitmap_info, u64 *offset, + u64 *bytes) +{ + unsigned long found_bits = 0; + unsigned long bits, i; + unsigned long next_zero; + + i = offset_to_bit(bitmap_info->offset, block_group->sectorsize, + max_t(u64, *offset, bitmap_info->offset)); + bits = bytes_to_bits(*bytes, block_group->sectorsize); + + for (i = find_next_bit(bitmap_info->bitmap, BITS_PER_BITMAP, i); + i < BITS_PER_BITMAP; + i = find_next_bit(bitmap_info->bitmap, BITS_PER_BITMAP, i + 1)) { + next_zero = find_next_zero_bit(bitmap_info->bitmap, + BITS_PER_BITMAP, i); + if ((next_zero - i) >= bits) { + found_bits = next_zero - i; + break; + } + i = next_zero; + } + + if (found_bits) { + *offset = (u64)(i * block_group->sectorsize) + + bitmap_info->offset; + *bytes = (u64)(found_bits) * block_group->sectorsize; + return 0; + } + + return -1; +} + +static struct btrfs_free_space *find_free_space(struct btrfs_block_group_cache + *block_group, u64 *offset, + u64 *bytes, int debug) +{ + struct btrfs_free_space *entry; + struct rb_node *node; + int ret; + + if (!block_group->free_space_offset.rb_node) + return NULL; + + entry = tree_search_offset(block_group, + offset_to_bitmap(block_group, *offset), + 0, 1); + if (!entry) + return NULL; + + for (node = &entry->offset_index; node; node = rb_next(node)) { + entry = rb_entry(node, struct btrfs_free_space, offset_index); + if (entry->bytes < *bytes) + continue; + + if (entry->bitmap) { + ret = search_bitmap(block_group, entry, offset, bytes); + if (!ret) + return entry; + continue; + } + + *offset = entry->offset; + *bytes = entry->bytes; + return entry; + } + + return NULL; +} + +static void add_new_bitmap(struct btrfs_block_group_cache *block_group, + struct btrfs_free_space *info, u64 offset) +{ + u64 bytes_per_bg = BITS_PER_BITMAP * block_group->sectorsize; + int max_bitmaps = (int)div64_u64(block_group->key.offset + + bytes_per_bg - 1, bytes_per_bg); + BUG_ON(block_group->total_bitmaps >= max_bitmaps); + + info->offset = offset_to_bitmap(block_group, offset); + link_free_space(block_group, info); + block_group->total_bitmaps++; + + recalculate_thresholds(block_group); +} + +static noinline int remove_from_bitmap(struct btrfs_block_group_cache *block_group, + struct btrfs_free_space *bitmap_info, + u64 *offset, u64 *bytes) +{ + u64 end; + +again: + end = bitmap_info->offset + + (u64)(BITS_PER_BITMAP * block_group->sectorsize) - 1; + + if (*offset > bitmap_info->offset && *offset + *bytes > end) { + bitmap_clear_bits(bitmap_info, *offset, + end - *offset + 1, block_group->sectorsize); + *bytes -= end - *offset + 1; + *offset = end + 1; + } else if (*offset >= bitmap_info->offset && *offset + *bytes <= end) { + bitmap_clear_bits(bitmap_info, *offset, + *bytes, block_group->sectorsize); + *bytes = 0; + } + + if (*bytes) { + if (!bitmap_info->bytes) { + unlink_free_space(block_group, bitmap_info); + kfree(bitmap_info->bitmap); + kfree(bitmap_info); + block_group->total_bitmaps--; + recalculate_thresholds(block_group); + } + + bitmap_info = tree_search_offset(block_group, + offset_to_bitmap(block_group, + *offset), + 1, 0); + if (!bitmap_info) + return -EINVAL; + + if (!bitmap_info->bitmap) + return -EAGAIN; + + goto again; + } else if (!bitmap_info->bytes) { + unlink_free_space(block_group, bitmap_info); + kfree(bitmap_info->bitmap); + kfree(bitmap_info); + block_group->total_bitmaps--; + recalculate_thresholds(block_group); + } + + return 0; +} + +static int insert_into_bitmap(struct btrfs_block_group_cache *block_group, + struct btrfs_free_space *info) +{ + struct btrfs_free_space *bitmap_info; + int added = 0; + u64 bytes, offset, end; + int ret; + + /* + * If we are below the extents threshold then we can add this as an + * extent, and don't have to deal with the bitmap + */ + if (block_group->free_extents < block_group->extents_thresh && + info->bytes > block_group->sectorsize * 4) + return 0; + + /* + * some block groups are so tiny they can't be enveloped by a bitmap, so + * don't even bother to create a bitmap for this + */ + if (BITS_PER_BITMAP * block_group->sectorsize > + block_group->key.offset) + return 0; + + bytes = info->bytes; + offset = info->offset; + +again: + bitmap_info = tree_search_offset(block_group, + offset_to_bitmap(block_group, offset), + 1, 0); + if (!bitmap_info) { + BUG_ON(added); + goto new_bitmap; + } + + end = bitmap_info->offset + + (u64)(BITS_PER_BITMAP * block_group->sectorsize); + + if (offset >= bitmap_info->offset && offset + bytes > end) { + bitmap_set_bits(bitmap_info, offset, end - offset, + block_group->sectorsize); + bytes -= end - offset; + offset = end; + added = 0; + } else if (offset >= bitmap_info->offset && offset + bytes <= end) { + bitmap_set_bits(bitmap_info, offset, bytes, + block_group->sectorsize); + bytes = 0; + } else { + BUG(); + } + + if (!bytes) { + ret = 1; + goto out; + } else + goto again; + +new_bitmap: + if (info && info->bitmap) { + add_new_bitmap(block_group, info, offset); + added = 1; + info = NULL; + goto again; + } else { + spin_unlock(&block_group->tree_lock); + + /* no pre-allocated info, allocate a new one */ + if (!info) { + info = kzalloc(sizeof(struct btrfs_free_space), + GFP_NOFS); + if (!info) { + spin_lock(&block_group->tree_lock); + ret = -ENOMEM; + goto out; + } + } + + /* allocate the bitmap */ + info->bitmap = kzalloc(PAGE_CACHE_SIZE, GFP_NOFS); + spin_lock(&block_group->tree_lock); + if (!info->bitmap) { + ret = -ENOMEM; + goto out; + } + goto again; + } + +out: + if (info) { + if (info->bitmap) + kfree(info->bitmap); + kfree(info); + } return ret; } @@ -208,8 +557,8 @@ static int link_free_space(struct btrfs_block_group_cache *block_group, int btrfs_add_free_space(struct btrfs_block_group_cache *block_group, u64 offset, u64 bytes) { - struct btrfs_free_space *right_info; - struct btrfs_free_space *left_info; + struct btrfs_free_space *right_info = NULL; + struct btrfs_free_space *left_info = NULL; struct btrfs_free_space *info = NULL; int ret = 0; @@ -227,18 +576,38 @@ int btrfs_add_free_space(struct btrfs_block_group_cache *block_group, * are adding, if there is remove that struct and add a new one to * cover the entire range */ - right_info = tree_search_offset(&block_group->free_space_offset, - offset+bytes, 0, 0); - left_info = tree_search_offset(&block_group->free_space_offset, - offset-1, 0, 1); + right_info = tree_search_offset(block_group, offset + bytes, 0, 0); + if (right_info && rb_prev(&right_info->offset_index)) + left_info = rb_entry(rb_prev(&right_info->offset_index), + struct btrfs_free_space, offset_index); + else + left_info = tree_search_offset(block_group, offset - 1, 0, 0); - if (right_info) { + /* + * If there was no extent directly to the left or right of this new + * extent then we know we're going to have to allocate a new extent, so + * before we do that see if we need to drop this into a bitmap + */ + if ((!left_info || left_info->bitmap) && + (!right_info || right_info->bitmap)) { + ret = insert_into_bitmap(block_group, info); + + if (ret < 0) { + goto out; + } else if (ret) { + ret = 0; + goto out; + } + } + + if (right_info && !right_info->bitmap) { unlink_free_space(block_group, right_info); info->bytes += right_info->bytes; kfree(right_info); } - if (left_info && left_info->offset + left_info->bytes == offset) { + if (left_info && !left_info->bitmap && + left_info->offset + left_info->bytes == offset) { unlink_free_space(block_group, left_info); info->offset = left_info->offset; info->bytes += left_info->bytes; @@ -248,11 +617,11 @@ int btrfs_add_free_space(struct btrfs_block_group_cache *block_group, ret = link_free_space(block_group, info); if (ret) kfree(info); - +out: spin_unlock(&block_group->tree_lock); if (ret) { - printk(KERN_ERR "btrfs: unable to add free space :%d\n", ret); + printk(KERN_CRIT "btrfs: unable to add free space :%d\n", ret); BUG_ON(ret == -EEXIST); } @@ -263,40 +632,65 @@ int btrfs_remove_free_space(struct btrfs_block_group_cache *block_group, u64 offset, u64 bytes) { struct btrfs_free_space *info; + struct btrfs_free_space *next_info = NULL; int ret = 0; spin_lock(&block_group->tree_lock); - info = tree_search_offset(&block_group->free_space_offset, offset, 0, - 1); - if (info && info->offset == offset) { - if (info->bytes < bytes) { - printk(KERN_ERR "Found free space at %llu, size %llu," - "trying to use %llu\n", - (unsigned long long)info->offset, - (unsigned long long)info->bytes, - (unsigned long long)bytes); +again: + info = tree_search_offset(block_group, offset, 0, 0); + if (!info) { + WARN_ON(1); + goto out_lock; + } + + if (info->bytes < bytes && rb_next(&info->offset_index)) { + u64 end; + next_info = rb_entry(rb_next(&info->offset_index), + struct btrfs_free_space, + offset_index); + + if (next_info->bitmap) + end = next_info->offset + BITS_PER_BITMAP * + block_group->sectorsize - 1; + else + end = next_info->offset + next_info->bytes; + + if (next_info->bytes < bytes || + next_info->offset > offset || offset > end) { + printk(KERN_CRIT "Found free space at %llu, size %llu," + " trying to use %llu\n", + (unsigned long long)info->offset, + (unsigned long long)info->bytes, + (unsigned long long)bytes); WARN_ON(1); ret = -EINVAL; - spin_unlock(&block_group->tree_lock); - goto out; + goto out_lock; } - unlink_free_space(block_group, info); - if (info->bytes == bytes) { - kfree(info); - spin_unlock(&block_group->tree_lock); - goto out; + info = next_info; + } + + if (info->bytes == bytes) { + unlink_free_space(block_group, info); + if (info->bitmap) { + kfree(info->bitmap); + block_group->total_bitmaps--; } + kfree(info); + goto out_lock; + } + if (!info->bitmap && info->offset == offset) { + unlink_free_space(block_group, info); info->offset += bytes; info->bytes -= bytes; + link_free_space(block_group, info); + goto out_lock; + } - ret = link_free_space(block_group, info); - spin_unlock(&block_group->tree_lock); - BUG_ON(ret); - } else if (info && info->offset < offset && - info->offset + info->bytes >= offset + bytes) { + if (!info->bitmap && info->offset <= offset && + info->offset + info->bytes >= offset + bytes) { u64 old_start = info->offset; /* * we're freeing space in the middle of the info, @@ -312,7 +706,9 @@ int btrfs_remove_free_space(struct btrfs_block_group_cache *block_group, info->offset = offset + bytes; info->bytes = old_end - info->offset; ret = link_free_space(block_group, info); - BUG_ON(ret); + WARN_ON(ret); + if (ret) + goto out_lock; } else { /* the hole we're creating ends at the end * of the info struct, just free the info @@ -320,32 +716,22 @@ int btrfs_remove_free_space(struct btrfs_block_group_cache *block_group, kfree(info); } spin_unlock(&block_group->tree_lock); - /* step two, insert a new info struct to cover anything - * before the hole + + /* step two, insert a new info struct to cover + * anything before the hole */ ret = btrfs_add_free_space(block_group, old_start, offset - old_start); - BUG_ON(ret); - } else { - spin_unlock(&block_group->tree_lock); - if (!info) { - printk(KERN_ERR "couldn't find space %llu to free\n", - (unsigned long long)offset); - printk(KERN_ERR "cached is %d, offset %llu bytes %llu\n", - block_group->cached, - (unsigned long long)block_group->key.objectid, - (unsigned long long)block_group->key.offset); - btrfs_dump_free_space(block_group, bytes); - } else if (info) { - printk(KERN_ERR "hmm, found offset=%llu bytes=%llu, " - "but wanted offset=%llu bytes=%llu\n", - (unsigned long long)info->offset, - (unsigned long long)info->bytes, - (unsigned long long)offset, - (unsigned long long)bytes); - } - WARN_ON(1); + WARN_ON(ret); + goto out; } + + ret = remove_from_bitmap(block_group, info, &offset, &bytes); + if (ret == -EAGAIN) + goto again; + BUG_ON(ret); +out_lock: + spin_unlock(&block_group->tree_lock); out: return ret; } @@ -361,10 +747,13 @@ void btrfs_dump_free_space(struct btrfs_block_group_cache *block_group, info = rb_entry(n, struct btrfs_free_space, offset_index); if (info->bytes >= bytes) count++; - printk(KERN_ERR "entry offset %llu, bytes %llu\n", + printk(KERN_CRIT "entry offset %llu, bytes %llu, bitmap %s\n", (unsigned long long)info->offset, - (unsigned long long)info->bytes); + (unsigned long long)info->bytes, + (info->bitmap) ? "yes" : "no"); } + printk(KERN_INFO "block group has cluster?: %s\n", + list_empty(&block_group->cluster_list) ? "no" : "yes"); printk(KERN_INFO "%d blocks of free space at or bigger than bytes is" "\n", count); } @@ -397,26 +786,35 @@ __btrfs_return_cluster_to_free_space( { struct btrfs_free_space *entry; struct rb_node *node; + bool bitmap; spin_lock(&cluster->lock); if (cluster->block_group != block_group) goto out; + bitmap = cluster->points_to_bitmap; + cluster->block_group = NULL; cluster->window_start = 0; + list_del_init(&cluster->block_group_list); + cluster->points_to_bitmap = false; + + if (bitmap) + goto out; + node = rb_first(&cluster->root); - while(node) { + while (node) { entry = rb_entry(node, struct btrfs_free_space, offset_index); node = rb_next(&entry->offset_index); rb_erase(&entry->offset_index, &cluster->root); - link_free_space(block_group, entry); + BUG_ON(entry->bitmap); + tree_insert_offset(&block_group->free_space_offset, + entry->offset, &entry->offset_index, 0); } - list_del_init(&cluster->block_group_list); - - btrfs_put_block_group(cluster->block_group); - cluster->block_group = NULL; cluster->root.rb_node = NULL; + out: spin_unlock(&cluster->lock); + btrfs_put_block_group(block_group); return 0; } @@ -425,20 +823,28 @@ void btrfs_remove_free_space_cache(struct btrfs_block_group_cache *block_group) struct btrfs_free_space *info; struct rb_node *node; struct btrfs_free_cluster *cluster; - struct btrfs_free_cluster *safe; + struct list_head *head; spin_lock(&block_group->tree_lock); - - list_for_each_entry_safe(cluster, safe, &block_group->cluster_list, - block_group_list) { + while ((head = block_group->cluster_list.next) != + &block_group->cluster_list) { + cluster = list_entry(head, struct btrfs_free_cluster, + block_group_list); WARN_ON(cluster->block_group != block_group); __btrfs_return_cluster_to_free_space(block_group, cluster); + if (need_resched()) { + spin_unlock(&block_group->tree_lock); + cond_resched(); + spin_lock(&block_group->tree_lock); + } } - while ((node = rb_last(&block_group->free_space_bytes)) != NULL) { - info = rb_entry(node, struct btrfs_free_space, bytes_index); + while ((node = rb_last(&block_group->free_space_offset)) != NULL) { + info = rb_entry(node, struct btrfs_free_space, offset_index); unlink_free_space(block_group, info); + if (info->bitmap) + kfree(info->bitmap); kfree(info); if (need_resched()) { spin_unlock(&block_group->tree_lock); @@ -446,6 +852,7 @@ void btrfs_remove_free_space_cache(struct btrfs_block_group_cache *block_group) spin_lock(&block_group->tree_lock); } } + spin_unlock(&block_group->tree_lock); } @@ -453,27 +860,37 @@ u64 btrfs_find_space_for_alloc(struct btrfs_block_group_cache *block_group, u64 offset, u64 bytes, u64 empty_size) { struct btrfs_free_space *entry = NULL; + u64 bytes_search = bytes + empty_size; u64 ret = 0; spin_lock(&block_group->tree_lock); - entry = tree_search_offset(&block_group->free_space_offset, offset, - bytes + empty_size, 1); + entry = find_free_space(block_group, &offset, &bytes_search, 0); if (!entry) - entry = tree_search_bytes(&block_group->free_space_bytes, - offset, bytes + empty_size); - if (entry) { + goto out; + + ret = offset; + if (entry->bitmap) { + bitmap_clear_bits(entry, offset, bytes, + block_group->sectorsize); + if (!entry->bytes) { + unlink_free_space(block_group, entry); + kfree(entry->bitmap); + kfree(entry); + block_group->total_bitmaps--; + recalculate_thresholds(block_group); + } + } else { unlink_free_space(block_group, entry); - ret = entry->offset; entry->offset += bytes; entry->bytes -= bytes; - if (!entry->bytes) kfree(entry); else link_free_space(block_group, entry); } - spin_unlock(&block_group->tree_lock); +out: + spin_unlock(&block_group->tree_lock); return ret; } @@ -517,6 +934,47 @@ int btrfs_return_cluster_to_free_space( return ret; } +static u64 btrfs_alloc_from_bitmap(struct btrfs_block_group_cache *block_group, + struct btrfs_free_cluster *cluster, + u64 bytes, u64 min_start) +{ + struct btrfs_free_space *entry; + int err; + u64 search_start = cluster->window_start; + u64 search_bytes = bytes; + u64 ret = 0; + + spin_lock(&block_group->tree_lock); + spin_lock(&cluster->lock); + + if (!cluster->points_to_bitmap) + goto out; + + if (cluster->block_group != block_group) + goto out; + + entry = tree_search_offset(block_group, search_start, 0, 0); + + if (!entry || !entry->bitmap) + goto out; + + search_start = min_start; + search_bytes = bytes; + + err = search_bitmap(block_group, entry, &search_start, + &search_bytes); + if (err) + goto out; + + ret = search_start; + bitmap_clear_bits(entry, ret, bytes, block_group->sectorsize); +out: + spin_unlock(&cluster->lock); + spin_unlock(&block_group->tree_lock); + + return ret; +} + /* * given a cluster, try to allocate 'bytes' from it, returns 0 * if it couldn't find anything suitably large, or a logical disk offset @@ -530,6 +988,10 @@ u64 btrfs_alloc_from_cluster(struct btrfs_block_group_cache *block_group, struct rb_node *node; u64 ret = 0; + if (cluster->points_to_bitmap) + return btrfs_alloc_from_bitmap(block_group, cluster, bytes, + min_start); + spin_lock(&cluster->lock); if (bytes > cluster->max_size) goto out; @@ -567,9 +1029,73 @@ u64 btrfs_alloc_from_cluster(struct btrfs_block_group_cache *block_group, } out: spin_unlock(&cluster->lock); + return ret; } +static int btrfs_bitmap_cluster(struct btrfs_block_group_cache *block_group, + struct btrfs_free_space *entry, + struct btrfs_free_cluster *cluster, + u64 offset, u64 bytes, u64 min_bytes) +{ + unsigned long next_zero; + unsigned long i; + unsigned long search_bits; + unsigned long total_bits; + unsigned long found_bits; + unsigned long start = 0; + unsigned long total_found = 0; + bool found = false; + + i = offset_to_bit(entry->offset, block_group->sectorsize, + max_t(u64, offset, entry->offset)); + search_bits = bytes_to_bits(min_bytes, block_group->sectorsize); + total_bits = bytes_to_bits(bytes, block_group->sectorsize); + +again: + found_bits = 0; + for (i = find_next_bit(entry->bitmap, BITS_PER_BITMAP, i); + i < BITS_PER_BITMAP; + i = find_next_bit(entry->bitmap, BITS_PER_BITMAP, i + 1)) { + next_zero = find_next_zero_bit(entry->bitmap, + BITS_PER_BITMAP, i); + if (next_zero - i >= search_bits) { + found_bits = next_zero - i; + break; + } + i = next_zero; + } + + if (!found_bits) + return -1; + + if (!found) { + start = i; + found = true; + } + + total_found += found_bits; + + if (cluster->max_size < found_bits * block_group->sectorsize) + cluster->max_size = found_bits * block_group->sectorsize; + + if (total_found < total_bits) { + i = find_next_bit(entry->bitmap, BITS_PER_BITMAP, next_zero); + if (i - start > total_bits * 2) { + total_found = 0; + cluster->max_size = 0; + found = false; + } + goto again; + } + + cluster->window_start = start * block_group->sectorsize + + entry->offset; + cluster->points_to_bitmap = true; + + return 0; +} + /* * here we try to find a cluster of blocks in a block group. The goal * is to find at least bytes free and up to empty_size + bytes free. @@ -587,12 +1113,12 @@ int btrfs_find_space_cluster(struct btrfs_trans_handle *trans, struct btrfs_free_space *entry = NULL; struct rb_node *node; struct btrfs_free_space *next; - struct btrfs_free_space *last; + struct btrfs_free_space *last = NULL; u64 min_bytes; u64 window_start; u64 window_free; u64 max_extent = 0; - int total_retries = 0; + bool found_bitmap = false; int ret; /* for metadata, allow allocates with more holes */ @@ -620,30 +1146,79 @@ int btrfs_find_space_cluster(struct btrfs_trans_handle *trans, goto out; } again: - min_bytes = min(min_bytes, bytes + empty_size); - entry = tree_search_bytes(&block_group->free_space_bytes, - offset, min_bytes); + entry = tree_search_offset(block_group, offset, found_bitmap, 1); if (!entry) { ret = -ENOSPC; goto out; } + + /* + * If found_bitmap is true, we exhausted our search for extent entries, + * and we just want to search all of the bitmaps that we can find, and + * ignore any extent entries we find. + */ + while (entry->bitmap || found_bitmap || + (!entry->bitmap && entry->bytes < min_bytes)) { + struct rb_node *node = rb_next(&entry->offset_index); + + if (entry->bitmap && entry->bytes > bytes + empty_size) { + ret = btrfs_bitmap_cluster(block_group, entry, cluster, + offset, bytes + empty_size, + min_bytes); + if (!ret) + goto got_it; + } + + if (!node) { + ret = -ENOSPC; + goto out; + } + entry = rb_entry(node, struct btrfs_free_space, offset_index); + } + + /* + * We already searched all the extent entries from the passed in offset + * to the end and didn't find enough space for the cluster, and we also + * didn't find any bitmaps that met our criteria, just go ahead and exit + */ + if (found_bitmap) { + ret = -ENOSPC; + goto out; + } + + cluster->points_to_bitmap = false; window_start = entry->offset; window_free = entry->bytes; last = entry; max_extent = entry->bytes; - while(1) { + while (1) { /* out window is just right, lets fill it */ if (window_free >= bytes + empty_size) break; node = rb_next(&last->offset_index); if (!node) { + if (found_bitmap) + goto again; ret = -ENOSPC; goto out; } next = rb_entry(node, struct btrfs_free_space, offset_index); + /* + * we found a bitmap, so if this search doesn't result in a + * cluster, we know to go and search again for the bitmaps and + * start looking for space there + */ + if (next->bitmap) { + if (!found_bitmap) + offset = next->offset; + found_bitmap = true; + last = next; + continue; + } + /* * we haven't filled the empty size and the window is * very large. reset and try again @@ -655,19 +1230,6 @@ again: window_free = entry->bytes; last = entry; max_extent = 0; - total_retries++; - if (total_retries % 64 == 0) { - if (min_bytes >= (bytes + empty_size)) { - ret = -ENOSPC; - goto out; - } - /* - * grow our allocation a bit, we're not having - * much luck - */ - min_bytes *= 2; - goto again; - } } else { last = next; window_free += next->bytes; @@ -685,11 +1247,19 @@ again: * The cluster includes an rbtree, but only uses the offset index * of each free space cache entry. */ - while(1) { + while (1) { node = rb_next(&entry->offset_index); - unlink_free_space(block_group, entry); + if (entry->bitmap && node) { + entry = rb_entry(node, struct btrfs_free_space, + offset_index); + continue; + } else if (entry->bitmap && !node) { + break; + } + + rb_erase(&entry->offset_index, &block_group->free_space_offset); ret = tree_insert_offset(&cluster->root, entry->offset, - &entry->offset_index); + &entry->offset_index, 0); BUG_ON(ret); if (!node || entry == last) @@ -697,8 +1267,10 @@ again: entry = rb_entry(node, struct btrfs_free_space, offset_index); } - ret = 0; + cluster->max_size = max_extent; +got_it: + ret = 0; atomic_inc(&block_group->count); list_add_tail(&cluster->block_group_list, &block_group->cluster_list); cluster->block_group = block_group; @@ -718,6 +1290,7 @@ void btrfs_init_free_cluster(struct btrfs_free_cluster *cluster) spin_lock_init(&cluster->refill_lock); cluster->root.rb_node = NULL; cluster->max_size = 0; + cluster->points_to_bitmap = false; INIT_LIST_HEAD(&cluster->block_group_list); cluster->block_group = NULL; } diff --git a/fs/btrfs/free-space-cache.h b/fs/btrfs/free-space-cache.h index 266fb876405..890a8e79011 100644 --- a/fs/btrfs/free-space-cache.h +++ b/fs/btrfs/free-space-cache.h @@ -19,6 +19,14 @@ #ifndef __BTRFS_FREE_SPACE_CACHE #define __BTRFS_FREE_SPACE_CACHE +struct btrfs_free_space { + struct rb_node offset_index; + u64 offset; + u64 bytes; + unsigned long *bitmap; + struct list_head list; +}; + int btrfs_add_free_space(struct btrfs_block_group_cache *block_group, u64 bytenr, u64 size); int btrfs_remove_free_space(struct btrfs_block_group_cache *block_group, -- cgit v1.2.3 From 817d52f8dba26d0295c26035531c30ce5f1e3c3e Mon Sep 17 00:00:00 2001 From: Josef Bacik Date: Mon, 13 Jul 2009 21:29:25 -0400 Subject: Btrfs: async block group caching This patch moves the caching of the block group off to a kthread in order to allow people to allocate sooner. Instead of blocking up behind the caching mutex, we instead kick of the caching kthread, and then attempt to make an allocation. If we cannot, we wait on the block groups caching waitqueue, which the caching kthread will wake the waiting threads up everytime it finds 2 meg worth of space, and then again when its finished caching. This is how I tested the speedup from this mkfs the disk mount the disk fill the disk up with fs_mark unmount the disk mount the disk time touch /mnt/foo Without my changes this took 11 seconds on my box, with these changes it now takes 1 second. Another change thats been put in place is we lock the super mirror's in the pinned extent map in order to keep us from adding that stuff as free space when caching the block group. This doesn't really change anything else as far as the pinned extent map is concerned, since for actual pinned extents we use EXTENT_DIRTY, but it does mean that when we unmount we have to go in and unlock those extents to keep from leaking memory. I've also added a check where when we are reading block groups from disk, if the amount of space used == the size of the block group, we go ahead and mark the block group as cached. This drastically reduces the amount of time it takes to cache the block groups. Using the same test as above, except doing a dd to a file and then unmounting, it used to take 33 seconds to umount, now it takes 3 seconds. This version uses the commit_root in the caching kthread, and then keeps track of how many async caching threads are running at any given time so if one of the async threads is still running as we cross transactions we can wait until its finished before handling the pinned extents. Thank you, Signed-off-by: Josef Bacik Signed-off-by: Chris Mason --- fs/btrfs/ctree.h | 22 ++- fs/btrfs/disk-io.c | 3 + fs/btrfs/extent-tree.c | 471 +++++++++++++++++++++++++++++++++++--------- fs/btrfs/free-space-cache.c | 42 ++-- fs/btrfs/transaction.c | 23 ++- fs/btrfs/tree-log.c | 2 +- 6 files changed, 439 insertions(+), 124 deletions(-) diff --git a/fs/btrfs/ctree.h b/fs/btrfs/ctree.h index 0cbf3491bb7..42b03c4ee49 100644 --- a/fs/btrfs/ctree.h +++ b/fs/btrfs/ctree.h @@ -691,6 +691,7 @@ struct btrfs_space_info { struct list_head block_groups; spinlock_t lock; struct rw_semaphore groups_sem; + atomic_t caching_threads; }; /* @@ -721,11 +722,17 @@ struct btrfs_free_cluster { struct list_head block_group_list; }; +enum btrfs_caching_type { + BTRFS_CACHE_NO = 0, + BTRFS_CACHE_STARTED = 1, + BTRFS_CACHE_FINISHED = 2, +}; + struct btrfs_block_group_cache { struct btrfs_key key; struct btrfs_block_group_item item; + struct btrfs_fs_info *fs_info; spinlock_t lock; - struct mutex cache_mutex; u64 pinned; u64 reserved; u64 flags; @@ -733,15 +740,19 @@ struct btrfs_block_group_cache { int extents_thresh; int free_extents; int total_bitmaps; - int cached; int ro; int dirty; + /* cache tracking stuff */ + wait_queue_head_t caching_q; + int cached; + struct btrfs_space_info *space_info; /* free space cache stuff */ spinlock_t tree_lock; struct rb_root free_space_offset; + u64 free_space; /* block group cache stuff */ struct rb_node cache_node; @@ -834,6 +845,7 @@ struct btrfs_fs_info { atomic_t async_submit_draining; atomic_t nr_async_bios; atomic_t async_delalloc_pages; + atomic_t async_caching_threads; /* * this is used by the balancing code to wait for all the pending @@ -950,6 +962,9 @@ struct btrfs_root { /* the node lock is held while changing the node pointer */ spinlock_t node_lock; + /* taken when updating the commit root */ + struct rw_semaphore commit_root_sem; + struct extent_buffer *commit_root; struct btrfs_root *log_root; struct btrfs_root *reloc_root; @@ -1911,7 +1926,7 @@ int btrfs_run_delayed_refs(struct btrfs_trans_handle *trans, struct btrfs_root *root, unsigned long count); int btrfs_lookup_extent(struct btrfs_root *root, u64 start, u64 len); int btrfs_update_pinned_extents(struct btrfs_root *root, - u64 bytenr, u64 num, int pin); + u64 bytenr, u64 num, int pin, int mark_free); int btrfs_drop_leaf_ref(struct btrfs_trans_handle *trans, struct btrfs_root *root, struct extent_buffer *leaf); int btrfs_cross_ref_exist(struct btrfs_trans_handle *trans, @@ -1996,6 +2011,7 @@ void btrfs_delalloc_reserve_space(struct btrfs_root *root, struct inode *inode, u64 bytes); void btrfs_delalloc_free_space(struct btrfs_root *root, struct inode *inode, u64 bytes); +void btrfs_free_super_mirror_extents(struct btrfs_fs_info *info); /* ctree.c */ int btrfs_bin_search(struct extent_buffer *eb, struct btrfs_key *key, int level, int *slot); diff --git a/fs/btrfs/disk-io.c b/fs/btrfs/disk-io.c index 55d9d188e69..ec2c915f7f4 100644 --- a/fs/btrfs/disk-io.c +++ b/fs/btrfs/disk-io.c @@ -907,6 +907,7 @@ static int __setup_root(u32 nodesize, u32 leafsize, u32 sectorsize, spin_lock_init(&root->inode_lock); mutex_init(&root->objectid_mutex); mutex_init(&root->log_mutex); + init_rwsem(&root->commit_root_sem); init_waitqueue_head(&root->log_writer_wait); init_waitqueue_head(&root->log_commit_wait[0]); init_waitqueue_head(&root->log_commit_wait[1]); @@ -1566,6 +1567,7 @@ struct btrfs_root *open_ctree(struct super_block *sb, atomic_set(&fs_info->async_delalloc_pages, 0); atomic_set(&fs_info->async_submit_draining, 0); atomic_set(&fs_info->nr_async_bios, 0); + atomic_set(&fs_info->async_caching_threads, 0); fs_info->sb = sb; fs_info->max_extent = (u64)-1; fs_info->max_inline = 8192 * 1024; @@ -2337,6 +2339,7 @@ int close_ctree(struct btrfs_root *root) free_extent_buffer(root->fs_info->csum_root->commit_root); btrfs_free_block_groups(root->fs_info); + btrfs_free_super_mirror_extents(root->fs_info); del_fs_roots(fs_info); diff --git a/fs/btrfs/extent-tree.c b/fs/btrfs/extent-tree.c index 98697be6bdd..9a489cc89fd 100644 --- a/fs/btrfs/extent-tree.c +++ b/fs/btrfs/extent-tree.c @@ -21,6 +21,7 @@ #include #include #include +#include #include "compat.h" #include "hash.h" #include "ctree.h" @@ -61,6 +62,13 @@ static int do_chunk_alloc(struct btrfs_trans_handle *trans, struct btrfs_root *extent_root, u64 alloc_bytes, u64 flags, int force); +static noinline int +block_group_cache_done(struct btrfs_block_group_cache *cache) +{ + smp_mb(); + return cache->cached == BTRFS_CACHE_FINISHED; +} + static int block_group_bits(struct btrfs_block_group_cache *cache, u64 bits) { return (cache->flags & bits) == bits; @@ -145,21 +153,64 @@ block_group_cache_tree_search(struct btrfs_fs_info *info, u64 bytenr, return ret; } +void btrfs_free_super_mirror_extents(struct btrfs_fs_info *info) +{ + u64 start, end, last = 0; + int ret; + + while (1) { + ret = find_first_extent_bit(&info->pinned_extents, last, + &start, &end, EXTENT_LOCKED); + if (ret) + break; + + unlock_extent(&info->pinned_extents, start, end, GFP_NOFS); + last = end+1; + } +} + +static int remove_sb_from_cache(struct btrfs_root *root, + struct btrfs_block_group_cache *cache) +{ + struct btrfs_fs_info *fs_info = root->fs_info; + u64 bytenr; + u64 *logical; + int stripe_len; + int i, nr, ret; + + for (i = 0; i < BTRFS_SUPER_MIRROR_MAX; i++) { + bytenr = btrfs_sb_offset(i); + ret = btrfs_rmap_block(&root->fs_info->mapping_tree, + cache->key.objectid, bytenr, + 0, &logical, &nr, &stripe_len); + BUG_ON(ret); + while (nr--) { + try_lock_extent(&fs_info->pinned_extents, + logical[nr], + logical[nr] + stripe_len - 1, GFP_NOFS); + } + kfree(logical); + } + + return 0; +} + /* * this is only called by cache_block_group, since we could have freed extents * we need to check the pinned_extents for any extents that can't be used yet * since their free space will be released as soon as the transaction commits. */ -static int add_new_free_space(struct btrfs_block_group_cache *block_group, +static u64 add_new_free_space(struct btrfs_block_group_cache *block_group, struct btrfs_fs_info *info, u64 start, u64 end) { - u64 extent_start, extent_end, size; + u64 extent_start, extent_end, size, total_added = 0; int ret; while (start < end) { ret = find_first_extent_bit(&info->pinned_extents, start, &extent_start, &extent_end, - EXTENT_DIRTY); + EXTENT_DIRTY|EXTENT_LOCKED| + EXTENT_DELALLOC); if (ret) break; @@ -167,6 +218,7 @@ static int add_new_free_space(struct btrfs_block_group_cache *block_group, start = extent_end + 1; } else if (extent_start > start && extent_start < end) { size = extent_start - start; + total_added += size; ret = btrfs_add_free_space(block_group, start, size); BUG_ON(ret); @@ -178,84 +230,139 @@ static int add_new_free_space(struct btrfs_block_group_cache *block_group, if (start < end) { size = end - start; + total_added += size; ret = btrfs_add_free_space(block_group, start, size); BUG_ON(ret); } - return 0; + return total_added; } -static int remove_sb_from_cache(struct btrfs_root *root, - struct btrfs_block_group_cache *cache) +DEFINE_MUTEX(discard_mutex); + +/* + * if async kthreads are running when we cross transactions, we mark any pinned + * extents with EXTENT_DELALLOC and then let the caching kthreads clean up those + * extents when they are done. Also we run this from btrfs_finish_extent_commit + * in case there were some pinned extents that were missed because we had + * already cached that block group. + */ +static void btrfs_discard_pinned_extents(struct btrfs_fs_info *fs_info, + struct btrfs_block_group_cache *cache) { - u64 bytenr; - u64 *logical; - int stripe_len; - int i, nr, ret; + u64 start, end, last; + int ret; - for (i = 0; i < BTRFS_SUPER_MIRROR_MAX; i++) { - bytenr = btrfs_sb_offset(i); - ret = btrfs_rmap_block(&root->fs_info->mapping_tree, - cache->key.objectid, bytenr, 0, - &logical, &nr, &stripe_len); - BUG_ON(ret); - while (nr--) { - btrfs_remove_free_space(cache, logical[nr], - stripe_len); + if (!cache) + last = 0; + else + last = cache->key.objectid; + + mutex_lock(&discard_mutex); + while (1) { + ret = find_first_extent_bit(&fs_info->pinned_extents, last, + &start, &end, EXTENT_DELALLOC); + if (ret) + break; + + if (cache && start >= cache->key.objectid + cache->key.offset) + break; + + + if (!cache) { + cache = btrfs_lookup_block_group(fs_info, start); + BUG_ON(!cache); + + start = max(start, cache->key.objectid); + end = min(end, cache->key.objectid + cache->key.offset - 1); + + if (block_group_cache_done(cache)) + btrfs_add_free_space(cache, start, + end - start + 1); + cache = NULL; + } else { + start = max(start, cache->key.objectid); + end = min(end, cache->key.objectid + cache->key.offset - 1); + btrfs_add_free_space(cache, start, end - start + 1); + } + + clear_extent_bits(&fs_info->pinned_extents, start, end, + EXTENT_DELALLOC, GFP_NOFS); + last = end + 1; + + if (need_resched()) { + mutex_unlock(&discard_mutex); + cond_resched(); + mutex_lock(&discard_mutex); } - kfree(logical); } - return 0; + mutex_unlock(&discard_mutex); } -static int cache_block_group(struct btrfs_root *root, - struct btrfs_block_group_cache *block_group) +static int caching_kthread(void *data) { + struct btrfs_block_group_cache *block_group = data; + struct btrfs_fs_info *fs_info = block_group->fs_info; + u64 last = 0; struct btrfs_path *path; int ret = 0; struct btrfs_key key; struct extent_buffer *leaf; int slot; - u64 last; - - if (!block_group) - return 0; + u64 total_found = 0; - root = root->fs_info->extent_root; - - if (block_group->cached) - return 0; + BUG_ON(!fs_info); path = btrfs_alloc_path(); if (!path) return -ENOMEM; - path->reada = 2; + atomic_inc(&fs_info->async_caching_threads); + atomic_inc(&block_group->space_info->caching_threads); + last = max_t(u64, block_group->key.objectid, BTRFS_SUPER_INFO_OFFSET); +again: + /* need to make sure the commit_root doesn't disappear */ + down_read(&fs_info->extent_root->commit_root_sem); + /* - * we get into deadlocks with paths held by callers of this function. - * since the alloc_mutex is protecting things right now, just - * skip the locking here + * We don't want to deadlock with somebody trying to allocate a new + * extent for the extent root while also trying to search the extent + * root to add free space. So we skip locking and search the commit + * root, since its read-only */ path->skip_locking = 1; - last = max_t(u64, block_group->key.objectid, BTRFS_SUPER_INFO_OFFSET); + path->search_commit_root = 1; + path->reada = 2; + key.objectid = last; key.offset = 0; btrfs_set_key_type(&key, BTRFS_EXTENT_ITEM_KEY); - ret = btrfs_search_slot(NULL, root, &key, path, 0, 0); + ret = btrfs_search_slot(NULL, fs_info->extent_root, &key, path, 0, 0); if (ret < 0) goto err; while (1) { + smp_mb(); + if (block_group->fs_info->closing) + break; + leaf = path->nodes[0]; slot = path->slots[0]; if (slot >= btrfs_header_nritems(leaf)) { - ret = btrfs_next_leaf(root, path); + ret = btrfs_next_leaf(fs_info->extent_root, path); if (ret < 0) goto err; - if (ret == 0) - continue; - else + else if (ret) break; + + if (need_resched()) { + btrfs_release_path(fs_info->extent_root, path); + up_read(&fs_info->extent_root->commit_root_sem); + cond_resched(); + goto again; + } + + continue; } btrfs_item_key_to_cpu(leaf, &key, slot); if (key.objectid < block_group->key.objectid) @@ -266,24 +373,63 @@ static int cache_block_group(struct btrfs_root *root, break; if (btrfs_key_type(&key) == BTRFS_EXTENT_ITEM_KEY) { - add_new_free_space(block_group, root->fs_info, last, - key.objectid); - + total_found += add_new_free_space(block_group, + fs_info, last, + key.objectid); last = key.objectid + key.offset; } + + if (total_found > (1024 * 1024 * 2)) { + total_found = 0; + wake_up(&block_group->caching_q); + } next: path->slots[0]++; } + ret = 0; - add_new_free_space(block_group, root->fs_info, last, - block_group->key.objectid + - block_group->key.offset); + total_found += add_new_free_space(block_group, fs_info, last, + block_group->key.objectid + + block_group->key.offset); + + spin_lock(&block_group->lock); + block_group->cached = BTRFS_CACHE_FINISHED; + spin_unlock(&block_group->lock); - block_group->cached = 1; - remove_sb_from_cache(root, block_group); - ret = 0; err: btrfs_free_path(path); + up_read(&fs_info->extent_root->commit_root_sem); + atomic_dec(&fs_info->async_caching_threads); + atomic_dec(&block_group->space_info->caching_threads); + wake_up(&block_group->caching_q); + + if (!ret) + btrfs_discard_pinned_extents(fs_info, block_group); + + return 0; +} + +static int cache_block_group(struct btrfs_block_group_cache *cache) +{ + struct task_struct *tsk; + int ret = 0; + + spin_lock(&cache->lock); + if (cache->cached != BTRFS_CACHE_NO) { + spin_unlock(&cache->lock); + return ret; + } + cache->cached = BTRFS_CACHE_STARTED; + spin_unlock(&cache->lock); + + tsk = kthread_run(caching_kthread, cache, "btrfs-cache-%llu\n", + cache->key.objectid); + if (IS_ERR(tsk)) { + ret = PTR_ERR(tsk); + printk(KERN_ERR "error running thread %d\n", ret); + BUG(); + } + return ret; } @@ -1721,7 +1867,7 @@ static int run_one_delayed_ref(struct btrfs_trans_handle *trans, BUG_ON(ret); } btrfs_update_pinned_extents(root, node->bytenr, - node->num_bytes, 1); + node->num_bytes, 1, 0); update_reserved_extents(root, node->bytenr, node->num_bytes, 0); } @@ -2496,6 +2642,7 @@ static int update_space_info(struct btrfs_fs_info *info, u64 flags, found->force_alloc = 0; *space_info = found; list_add_rcu(&found->list, &info->space_info); + atomic_set(&found->caching_threads, 0); return 0; } @@ -2953,7 +3100,7 @@ static u64 first_logical_byte(struct btrfs_root *root, u64 search_start) } int btrfs_update_pinned_extents(struct btrfs_root *root, - u64 bytenr, u64 num, int pin) + u64 bytenr, u64 num, int pin, int mark_free) { u64 len; struct btrfs_block_group_cache *cache; @@ -2988,7 +3135,7 @@ int btrfs_update_pinned_extents(struct btrfs_root *root, spin_unlock(&cache->lock); spin_unlock(&cache->space_info->lock); fs_info->total_pinned -= len; - if (cache->cached) + if (block_group_cache_done(cache) && mark_free) btrfs_add_free_space(cache, bytenr, len); } btrfs_put_block_group(cache); @@ -3034,14 +3181,27 @@ int btrfs_copy_pinned(struct btrfs_root *root, struct extent_io_tree *copy) u64 last = 0; u64 start; u64 end; + bool caching_kthreads = false; struct extent_io_tree *pinned_extents = &root->fs_info->pinned_extents; int ret; + if (atomic_read(&root->fs_info->async_caching_threads)) + caching_kthreads = true; + while (1) { ret = find_first_extent_bit(pinned_extents, last, &start, &end, EXTENT_DIRTY); if (ret) break; + + /* + * we need to make sure that the pinned extents don't go away + * while we are caching block groups + */ + if (unlikely(caching_kthreads)) + set_extent_delalloc(pinned_extents, start, end, + GFP_NOFS); + set_extent_dirty(copy, start, end, GFP_NOFS); last = end + 1; } @@ -3055,6 +3215,12 @@ int btrfs_finish_extent_commit(struct btrfs_trans_handle *trans, u64 start; u64 end; int ret; + int mark_free = 1; + + ret = find_first_extent_bit(&root->fs_info->pinned_extents, 0, + &start, &end, EXTENT_DELALLOC); + if (!ret) + mark_free = 0; while (1) { ret = find_first_extent_bit(unpin, 0, &start, &end, @@ -3065,11 +3231,16 @@ int btrfs_finish_extent_commit(struct btrfs_trans_handle *trans, ret = btrfs_discard_extent(root, start, end + 1 - start); /* unlocks the pinned mutex */ - btrfs_update_pinned_extents(root, start, end + 1 - start, 0); + btrfs_update_pinned_extents(root, start, end + 1 - start, 0, + mark_free); clear_extent_dirty(unpin, start, end, GFP_NOFS); cond_resched(); } + + if (unlikely(!mark_free)) + btrfs_discard_pinned_extents(root->fs_info, NULL); + return ret; } @@ -3110,7 +3281,7 @@ static int pin_down_bytes(struct btrfs_trans_handle *trans, pinit: btrfs_set_path_blocking(path); /* unlocks the pinned mutex */ - btrfs_update_pinned_extents(root, bytenr, num_bytes, 1); + btrfs_update_pinned_extents(root, bytenr, num_bytes, 1, 0); BUG_ON(err < 0); return 0; @@ -3421,7 +3592,7 @@ int btrfs_free_extent(struct btrfs_trans_handle *trans, if (root_objectid == BTRFS_TREE_LOG_OBJECTID) { WARN_ON(owner >= BTRFS_FIRST_FREE_OBJECTID); /* unlocks the pinned mutex */ - btrfs_update_pinned_extents(root, bytenr, num_bytes, 1); + btrfs_update_pinned_extents(root, bytenr, num_bytes, 1, 0); update_reserved_extents(root, bytenr, num_bytes, 0); ret = 0; } else if (owner < BTRFS_FIRST_FREE_OBJECTID) { @@ -3447,6 +3618,45 @@ static u64 stripe_align(struct btrfs_root *root, u64 val) return ret; } +/* + * when we wait for progress in the block group caching, its because + * our allocation attempt failed at least once. So, we must sleep + * and let some progress happen before we try again. + * + * This function will sleep at least once waiting for new free space to + * show up, and then it will check the block group free space numbers + * for our min num_bytes. Another option is to have it go ahead + * and look in the rbtree for a free extent of a given size, but this + * is a good start. + */ +static noinline int +wait_block_group_cache_progress(struct btrfs_block_group_cache *cache, + u64 num_bytes) +{ + DEFINE_WAIT(wait); + + prepare_to_wait(&cache->caching_q, &wait, TASK_UNINTERRUPTIBLE); + + if (block_group_cache_done(cache)) { + finish_wait(&cache->caching_q, &wait); + return 0; + } + schedule(); + finish_wait(&cache->caching_q, &wait); + + wait_event(cache->caching_q, block_group_cache_done(cache) || + (cache->free_space >= num_bytes)); + return 0; +} + +enum btrfs_loop_type { + LOOP_CACHED_ONLY = 0, + LOOP_CACHING_NOWAIT = 1, + LOOP_CACHING_WAIT = 2, + LOOP_ALLOC_CHUNK = 3, + LOOP_NO_EMPTY_SIZE = 4, +}; + /* * walks the btree of allocated extents and find a hole of a given size. * The key ins is changed to record the hole: @@ -3472,6 +3682,7 @@ static noinline int find_free_extent(struct btrfs_trans_handle *trans, struct btrfs_space_info *space_info; int last_ptr_loop = 0; int loop = 0; + bool found_uncached_bg = false; WARN_ON(num_bytes < root->sectorsize); btrfs_set_key_type(ins, BTRFS_EXTENT_ITEM_KEY); @@ -3503,15 +3714,18 @@ static noinline int find_free_extent(struct btrfs_trans_handle *trans, search_start = max(search_start, first_logical_byte(root, 0)); search_start = max(search_start, hint_byte); - if (!last_ptr) { + if (!last_ptr) empty_cluster = 0; - loop = 1; - } if (search_start == hint_byte) { block_group = btrfs_lookup_block_group(root->fs_info, search_start); - if (block_group && block_group_bits(block_group, data)) { + /* + * we don't want to use the block group if it doesn't match our + * allocation bits, or if its not cached. + */ + if (block_group && block_group_bits(block_group, data) && + block_group_cache_done(block_group)) { down_read(&space_info->groups_sem); if (list_empty(&block_group->list) || block_group->ro) { @@ -3534,21 +3748,35 @@ search: down_read(&space_info->groups_sem); list_for_each_entry(block_group, &space_info->block_groups, list) { u64 offset; + int cached; atomic_inc(&block_group->count); search_start = block_group->key.objectid; have_block_group: - if (unlikely(!block_group->cached)) { - mutex_lock(&block_group->cache_mutex); - ret = cache_block_group(root, block_group); - mutex_unlock(&block_group->cache_mutex); - if (ret) { - btrfs_put_block_group(block_group); - break; + if (unlikely(block_group->cached == BTRFS_CACHE_NO)) { + /* + * we want to start caching kthreads, but not too many + * right off the bat so we don't overwhelm the system, + * so only start them if there are less than 2 and we're + * in the initial allocation phase. + */ + if (loop > LOOP_CACHING_NOWAIT || + atomic_read(&space_info->caching_threads) < 2) { + ret = cache_block_group(block_group); + BUG_ON(ret); } } + cached = block_group_cache_done(block_group); + if (unlikely(!cached)) { + found_uncached_bg = true; + + /* if we only want cached bgs, loop */ + if (loop == LOOP_CACHED_ONLY) + goto loop; + } + if (unlikely(block_group->ro)) goto loop; @@ -3627,14 +3855,21 @@ refill_cluster: spin_unlock(&last_ptr->refill_lock); goto checks; } + } else if (!cached && loop > LOOP_CACHING_NOWAIT) { + spin_unlock(&last_ptr->refill_lock); + + wait_block_group_cache_progress(block_group, + num_bytes + empty_cluster + empty_size); + goto have_block_group; } + /* * at this point we either didn't find a cluster * or we weren't able to allocate a block from our * cluster. Free the cluster we've been trying * to use, and go to the next block group */ - if (loop < 2) { + if (loop < LOOP_NO_EMPTY_SIZE) { btrfs_return_cluster_to_free_space(NULL, last_ptr); spin_unlock(&last_ptr->refill_lock); @@ -3645,8 +3880,15 @@ refill_cluster: offset = btrfs_find_space_for_alloc(block_group, search_start, num_bytes, empty_size); - if (!offset) + if (!offset && (cached || (!cached && + loop == LOOP_CACHING_NOWAIT))) { goto loop; + } else if (!offset && (!cached && + loop > LOOP_CACHING_NOWAIT)) { + wait_block_group_cache_progress(block_group, + num_bytes + empty_size); + goto have_block_group; + } checks: search_start = stripe_align(root, offset); /* move on to the next group */ @@ -3694,13 +3936,26 @@ loop: } up_read(&space_info->groups_sem); - /* loop == 0, try to find a clustered alloc in every block group - * loop == 1, try again after forcing a chunk allocation - * loop == 2, set empty_size and empty_cluster to 0 and try again + /* LOOP_CACHED_ONLY, only search fully cached block groups + * LOOP_CACHING_NOWAIT, search partially cached block groups, but + * dont wait foR them to finish caching + * LOOP_CACHING_WAIT, search everything, and wait if our bg is caching + * LOOP_ALLOC_CHUNK, force a chunk allocation and try again + * LOOP_NO_EMPTY_SIZE, set empty_size and empty_cluster to 0 and try + * again */ - if (!ins->objectid && loop < 3 && - (empty_size || empty_cluster || allowed_chunk_alloc)) { - if (loop >= 2) { + if (!ins->objectid && loop < LOOP_NO_EMPTY_SIZE && + (found_uncached_bg || empty_size || empty_cluster || + allowed_chunk_alloc)) { + if (found_uncached_bg) { + found_uncached_bg = false; + if (loop < LOOP_CACHING_WAIT) { + loop++; + goto search; + } + } + + if (loop == LOOP_ALLOC_CHUNK) { empty_size = 0; empty_cluster = 0; } @@ -3713,7 +3968,7 @@ loop: space_info->force_alloc = 1; } - if (loop < 3) { + if (loop < LOOP_NO_EMPTY_SIZE) { loop++; goto search; } @@ -3809,7 +4064,7 @@ again: num_bytes, data, 1); goto again; } - if (ret) { + if (ret == -ENOSPC) { struct btrfs_space_info *sinfo; sinfo = __find_space_info(root->fs_info, data); @@ -3817,7 +4072,6 @@ again: "wanted %llu\n", (unsigned long long)data, (unsigned long long)num_bytes); dump_space_info(sinfo, num_bytes); - BUG(); } return ret; @@ -3855,7 +4109,9 @@ int btrfs_reserve_extent(struct btrfs_trans_handle *trans, ret = __btrfs_reserve_extent(trans, root, num_bytes, min_alloc_size, empty_size, hint_byte, search_end, ins, data); - update_reserved_extents(root, ins->objectid, ins->offset, 1); + if (!ret) + update_reserved_extents(root, ins->objectid, ins->offset, 1); + return ret; } @@ -4017,9 +4273,9 @@ int btrfs_alloc_logged_file_extent(struct btrfs_trans_handle *trans, struct btrfs_block_group_cache *block_group; block_group = btrfs_lookup_block_group(root->fs_info, ins->objectid); - mutex_lock(&block_group->cache_mutex); - cache_block_group(root, block_group); - mutex_unlock(&block_group->cache_mutex); + cache_block_group(block_group); + wait_event(block_group->caching_q, + block_group_cache_done(block_group)); ret = btrfs_remove_free_space(block_group, ins->objectid, ins->offset); @@ -4050,7 +4306,8 @@ static int alloc_tree_block(struct btrfs_trans_handle *trans, ret = __btrfs_reserve_extent(trans, root, num_bytes, num_bytes, empty_size, hint_byte, search_end, ins, 0); - BUG_ON(ret); + if (ret) + return ret; if (root_objectid == BTRFS_TREE_RELOC_OBJECTID) { if (parent == 0) @@ -6966,11 +7223,16 @@ int btrfs_free_block_groups(struct btrfs_fs_info *info) &info->block_group_cache_tree); spin_unlock(&info->block_group_cache_lock); - btrfs_remove_free_space_cache(block_group); down_write(&block_group->space_info->groups_sem); list_del(&block_group->list); up_write(&block_group->space_info->groups_sem); + if (block_group->cached == BTRFS_CACHE_STARTED) + wait_event(block_group->caching_q, + block_group_cache_done(block_group)); + + btrfs_remove_free_space_cache(block_group); + WARN_ON(atomic_read(&block_group->count) != 1); kfree(block_group); @@ -7036,10 +7298,10 @@ int btrfs_read_block_groups(struct btrfs_root *root) atomic_set(&cache->count, 1); spin_lock_init(&cache->lock); spin_lock_init(&cache->tree_lock); - mutex_init(&cache->cache_mutex); + cache->fs_info = info; + init_waitqueue_head(&cache->caching_q); INIT_LIST_HEAD(&cache->list); INIT_LIST_HEAD(&cache->cluster_list); - cache->sectorsize = root->sectorsize; /* * we only want to have 32k of ram per block group for keeping @@ -7057,6 +7319,26 @@ int btrfs_read_block_groups(struct btrfs_root *root) key.objectid = found_key.objectid + found_key.offset; btrfs_release_path(root, path); cache->flags = btrfs_block_group_flags(&cache->item); + cache->sectorsize = root->sectorsize; + + remove_sb_from_cache(root, cache); + + /* + * check for two cases, either we are full, and therefore + * don't need to bother with the caching work since we won't + * find any space, or we are empty, and we can just add all + * the space in and be done with it. This saves us _alot_ of + * time, particularly in the full case. + */ + if (found_key.offset == btrfs_block_group_used(&cache->item)) { + cache->cached = BTRFS_CACHE_FINISHED; + } else if (btrfs_block_group_used(&cache->item) == 0) { + cache->cached = BTRFS_CACHE_FINISHED; + add_new_free_space(cache, root->fs_info, + found_key.objectid, + found_key.objectid + + found_key.offset); + } ret = update_space_info(info, cache->flags, found_key.offset, btrfs_block_group_used(&cache->item), @@ -7112,7 +7394,7 @@ int btrfs_make_block_group(struct btrfs_trans_handle *trans, atomic_set(&cache->count, 1); spin_lock_init(&cache->lock); spin_lock_init(&cache->tree_lock); - mutex_init(&cache->cache_mutex); + init_waitqueue_head(&cache->caching_q); INIT_LIST_HEAD(&cache->list); INIT_LIST_HEAD(&cache->cluster_list); @@ -7121,11 +7403,12 @@ int btrfs_make_block_group(struct btrfs_trans_handle *trans, cache->flags = type; btrfs_set_block_group_flags(&cache->item, type); - cache->cached = 1; - ret = btrfs_add_free_space(cache, chunk_offset, size); - BUG_ON(ret); + cache->cached = BTRFS_CACHE_FINISHED; remove_sb_from_cache(root, cache); + add_new_free_space(cache, root->fs_info, chunk_offset, + chunk_offset + size); + ret = update_space_info(root->fs_info, cache->flags, size, bytes_used, &cache->space_info); BUG_ON(ret); @@ -7184,7 +7467,7 @@ int btrfs_remove_block_group(struct btrfs_trans_handle *trans, rb_erase(&block_group->cache_node, &root->fs_info->block_group_cache_tree); spin_unlock(&root->fs_info->block_group_cache_lock); - btrfs_remove_free_space_cache(block_group); + down_write(&block_group->space_info->groups_sem); /* * we must use list_del_init so people can check to see if they @@ -7193,6 +7476,12 @@ int btrfs_remove_block_group(struct btrfs_trans_handle *trans, list_del_init(&block_group->list); up_write(&block_group->space_info->groups_sem); + if (block_group->cached == BTRFS_CACHE_STARTED) + wait_event(block_group->caching_q, + block_group_cache_done(block_group)); + + btrfs_remove_free_space_cache(block_group); + spin_lock(&block_group->space_info->lock); block_group->space_info->total_bytes -= block_group->key.offset; block_group->space_info->bytes_readonly -= block_group->key.offset; diff --git a/fs/btrfs/free-space-cache.c b/fs/btrfs/free-space-cache.c index ab8cad8b46c..af99b78b288 100644 --- a/fs/btrfs/free-space-cache.c +++ b/fs/btrfs/free-space-cache.c @@ -238,6 +238,7 @@ static void unlink_free_space(struct btrfs_block_group_cache *block_group, { rb_erase(&info->offset_index, &block_group->free_space_offset); block_group->free_extents--; + block_group->free_space -= info->bytes; } static int link_free_space(struct btrfs_block_group_cache *block_group, @@ -251,6 +252,7 @@ static int link_free_space(struct btrfs_block_group_cache *block_group, if (ret) return ret; + block_group->free_space += info->bytes; block_group->free_extents++; return ret; } @@ -285,36 +287,40 @@ static void recalculate_thresholds(struct btrfs_block_group_cache *block_group) } } -static void bitmap_clear_bits(struct btrfs_free_space *info, u64 offset, u64 bytes, - u64 sectorsize) +static void bitmap_clear_bits(struct btrfs_block_group_cache *block_group, + struct btrfs_free_space *info, u64 offset, + u64 bytes) { unsigned long start, end; unsigned long i; - start = offset_to_bit(info->offset, sectorsize, offset); - end = start + bytes_to_bits(bytes, sectorsize); + start = offset_to_bit(info->offset, block_group->sectorsize, offset); + end = start + bytes_to_bits(bytes, block_group->sectorsize); BUG_ON(end > BITS_PER_BITMAP); for (i = start; i < end; i++) clear_bit(i, info->bitmap); info->bytes -= bytes; + block_group->free_space -= bytes; } -static void bitmap_set_bits(struct btrfs_free_space *info, u64 offset, u64 bytes, - u64 sectorsize) +static void bitmap_set_bits(struct btrfs_block_group_cache *block_group, + struct btrfs_free_space *info, u64 offset, + u64 bytes) { unsigned long start, end; unsigned long i; - start = offset_to_bit(info->offset, sectorsize, offset); - end = start + bytes_to_bits(bytes, sectorsize); + start = offset_to_bit(info->offset, block_group->sectorsize, offset); + end = start + bytes_to_bits(bytes, block_group->sectorsize); BUG_ON(end > BITS_PER_BITMAP); for (i = start; i < end; i++) set_bit(i, info->bitmap); info->bytes += bytes; + block_group->free_space += bytes; } static int search_bitmap(struct btrfs_block_group_cache *block_group, @@ -414,13 +420,12 @@ again: (u64)(BITS_PER_BITMAP * block_group->sectorsize) - 1; if (*offset > bitmap_info->offset && *offset + *bytes > end) { - bitmap_clear_bits(bitmap_info, *offset, - end - *offset + 1, block_group->sectorsize); + bitmap_clear_bits(block_group, bitmap_info, *offset, + end - *offset + 1); *bytes -= end - *offset + 1; *offset = end + 1; } else if (*offset >= bitmap_info->offset && *offset + *bytes <= end) { - bitmap_clear_bits(bitmap_info, *offset, - *bytes, block_group->sectorsize); + bitmap_clear_bits(block_group, bitmap_info, *offset, *bytes); *bytes = 0; } @@ -495,14 +500,13 @@ again: (u64)(BITS_PER_BITMAP * block_group->sectorsize); if (offset >= bitmap_info->offset && offset + bytes > end) { - bitmap_set_bits(bitmap_info, offset, end - offset, - block_group->sectorsize); + bitmap_set_bits(block_group, bitmap_info, offset, + end - offset); bytes -= end - offset; offset = end; added = 0; } else if (offset >= bitmap_info->offset && offset + bytes <= end) { - bitmap_set_bits(bitmap_info, offset, bytes, - block_group->sectorsize); + bitmap_set_bits(block_group, bitmap_info, offset, bytes); bytes = 0; } else { BUG(); @@ -870,8 +874,7 @@ u64 btrfs_find_space_for_alloc(struct btrfs_block_group_cache *block_group, ret = offset; if (entry->bitmap) { - bitmap_clear_bits(entry, offset, bytes, - block_group->sectorsize); + bitmap_clear_bits(block_group, entry, offset, bytes); if (!entry->bytes) { unlink_free_space(block_group, entry); kfree(entry->bitmap); @@ -891,6 +894,7 @@ u64 btrfs_find_space_for_alloc(struct btrfs_block_group_cache *block_group, out: spin_unlock(&block_group->tree_lock); + return ret; } @@ -967,7 +971,7 @@ static u64 btrfs_alloc_from_bitmap(struct btrfs_block_group_cache *block_group, goto out; ret = search_start; - bitmap_clear_bits(entry, ret, bytes, block_group->sectorsize); + bitmap_clear_bits(block_group, entry, ret, bytes); out: spin_unlock(&cluster->lock); spin_unlock(&block_group->tree_lock); diff --git a/fs/btrfs/transaction.c b/fs/btrfs/transaction.c index 81f7124c305..32454d1c566 100644 --- a/fs/btrfs/transaction.c +++ b/fs/btrfs/transaction.c @@ -40,6 +40,14 @@ static noinline void put_transaction(struct btrfs_transaction *transaction) } } +static noinline void switch_commit_root(struct btrfs_root *root) +{ + down_write(&root->commit_root_sem); + free_extent_buffer(root->commit_root); + root->commit_root = btrfs_root_node(root); + up_write(&root->commit_root_sem); +} + /* * either allocate a new transaction or hop into the existing one */ @@ -458,8 +466,7 @@ static int update_cowonly_root(struct btrfs_trans_handle *trans, ret = btrfs_write_dirty_block_groups(trans, root); BUG_ON(ret); } - free_extent_buffer(root->commit_root); - root->commit_root = btrfs_root_node(root); + switch_commit_root(root); return 0; } @@ -537,8 +544,7 @@ static noinline int commit_fs_roots(struct btrfs_trans_handle *trans, btrfs_update_reloc_root(trans, root); if (root->commit_root != root->node) { - free_extent_buffer(root->commit_root); - root->commit_root = btrfs_root_node(root); + switch_commit_root(root); btrfs_set_root_node(&root->root_item, root->node); } @@ -1002,15 +1008,11 @@ int btrfs_commit_transaction(struct btrfs_trans_handle *trans, btrfs_set_root_node(&root->fs_info->tree_root->root_item, root->fs_info->tree_root->node); - free_extent_buffer(root->fs_info->tree_root->commit_root); - root->fs_info->tree_root->commit_root = - btrfs_root_node(root->fs_info->tree_root); + switch_commit_root(root->fs_info->tree_root); btrfs_set_root_node(&root->fs_info->chunk_root->root_item, root->fs_info->chunk_root->node); - free_extent_buffer(root->fs_info->chunk_root->commit_root); - root->fs_info->chunk_root->commit_root = - btrfs_root_node(root->fs_info->chunk_root); + switch_commit_root(root->fs_info->chunk_root); update_super_roots(root); @@ -1050,6 +1052,7 @@ int btrfs_commit_transaction(struct btrfs_trans_handle *trans, cur_trans->commit_done = 1; root->fs_info->last_trans_committed = cur_trans->transid; + wake_up(&cur_trans->commit_wait); put_transaction(cur_trans); diff --git a/fs/btrfs/tree-log.c b/fs/btrfs/tree-log.c index c13922206d1..19560686261 100644 --- a/fs/btrfs/tree-log.c +++ b/fs/btrfs/tree-log.c @@ -264,7 +264,7 @@ static int process_one_buffer(struct btrfs_root *log, { if (wc->pin) btrfs_update_pinned_extents(log->fs_info->extent_root, - eb->start, eb->len, 1); + eb->start, eb->len, 1, 0); if (btrfs_buffer_uptodate(eb, gen)) { if (wc->write) -- cgit v1.2.3 From 8de56b7deb2534a586839eda52843c1dae680dc5 Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Fri, 24 Jul 2009 16:51:47 +0200 Subject: ALSA: hda - Fix mute control with some ALC262 models The master mute switch is wrongly implemented as checking the pointer instead of its value, thus it can be never muted. This patch fixes the issue. Reference: Novell bnc#404873 https://bugzilla.novell.com/show_bug.cgi?id=404873 Signed-off-by: Takashi Iwai Cc: --- sound/pci/hda/patch_realtek.c | 33 ++++++++++++++++----------------- 1 file changed, 16 insertions(+), 17 deletions(-) diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c index 7e99763ca52..8c8b273116f 100644 --- a/sound/pci/hda/patch_realtek.c +++ b/sound/pci/hda/patch_realtek.c @@ -10631,6 +10631,18 @@ static void alc262_lenovo_3000_unsol_event(struct hda_codec *codec, alc262_lenovo_3000_automute(codec, 1); } +static int amp_stereo_mute_update(struct hda_codec *codec, hda_nid_t nid, + int dir, int idx, long *valp) +{ + int i, change = 0; + + for (i = 0; i < 2; i++, valp++) + change |= snd_hda_codec_amp_update(codec, nid, i, dir, idx, + HDA_AMP_MUTE, + *valp ? 0 : HDA_AMP_MUTE); + return change; +} + /* bind hp and internal speaker mute (with plug check) */ static int alc262_fujitsu_master_sw_put(struct snd_kcontrol *kcontrol, struct snd_ctl_elem_value *ucontrol) @@ -10639,13 +10651,8 @@ static int alc262_fujitsu_master_sw_put(struct snd_kcontrol *kcontrol, long *valp = ucontrol->value.integer.value; int change; - change = snd_hda_codec_amp_stereo(codec, 0x14, HDA_OUTPUT, 0, - HDA_AMP_MUTE, - valp ? 0 : HDA_AMP_MUTE); - change |= snd_hda_codec_amp_stereo(codec, 0x1b, HDA_OUTPUT, 0, - HDA_AMP_MUTE, - valp ? 0 : HDA_AMP_MUTE); - + change = amp_stereo_mute_update(codec, 0x14, HDA_OUTPUT, 0, valp); + change |= amp_stereo_mute_update(codec, 0x1b, HDA_OUTPUT, 0, valp); if (change) alc262_fujitsu_automute(codec, 0); return change; @@ -10680,10 +10687,7 @@ static int alc262_lenovo_3000_master_sw_put(struct snd_kcontrol *kcontrol, long *valp = ucontrol->value.integer.value; int change; - change = snd_hda_codec_amp_stereo(codec, 0x1b, HDA_OUTPUT, 0, - HDA_AMP_MUTE, - valp ? 0 : HDA_AMP_MUTE); - + change = amp_stereo_mute_update(codec, 0x1b, HDA_OUTPUT, 0, valp); if (change) alc262_lenovo_3000_automute(codec, 0); return change; @@ -11854,12 +11858,7 @@ static int alc268_acer_master_sw_put(struct snd_kcontrol *kcontrol, long *valp = ucontrol->value.integer.value; int change; - change = snd_hda_codec_amp_update(codec, 0x14, 0, HDA_OUTPUT, 0, - HDA_AMP_MUTE, - valp[0] ? 0 : HDA_AMP_MUTE); - change |= snd_hda_codec_amp_update(codec, 0x14, 1, HDA_OUTPUT, 0, - HDA_AMP_MUTE, - valp[1] ? 0 : HDA_AMP_MUTE); + change = amp_stereo_mute_update(codec, 0x14, HDA_OUTPUT, 0, valp); if (change) alc268_acer_automute(codec, 0); return change; -- cgit v1.2.3 From 20736abaa361bea488df6a1f66f6b37fb01107b9 Mon Sep 17 00:00:00 2001 From: Diego Calleja Date: Fri, 24 Jul 2009 11:06:52 -0400 Subject: Btrfs: Remove code duplication in comp_keys comp_keys is duplicating what is done in btrfs_comp_cpu_keys, so just call it. Signed-off-by: Diego Calleja Signed-off-by: Chris Mason --- fs/btrfs/ctree.c | 14 +------------- 1 file changed, 1 insertion(+), 13 deletions(-) diff --git a/fs/btrfs/ctree.c b/fs/btrfs/ctree.c index fdd423a550d..91572091c0a 100644 --- a/fs/btrfs/ctree.c +++ b/fs/btrfs/ctree.c @@ -557,19 +557,7 @@ static int comp_keys(struct btrfs_disk_key *disk, struct btrfs_key *k2) btrfs_disk_key_to_cpu(&k1, disk); - if (k1.objectid > k2->objectid) - return 1; - if (k1.objectid < k2->objectid) - return -1; - if (k1.type > k2->type) - return 1; - if (k1.type < k2->type) - return -1; - if (k1.offset > k2->offset) - return 1; - if (k1.offset < k2->offset) - return -1; - return 0; + return btrfs_comp_cpu_keys(&k1, k2); } /* -- cgit v1.2.3 From 1fcbac581be375ca0a686f72ee2b7fd1dbf386e7 Mon Sep 17 00:00:00 2001 From: Yan Zheng Date: Fri, 24 Jul 2009 11:06:53 -0400 Subject: Btrfs: find_free_dev_extent doesn't handle holes at the start of the device find_free_dev_extent does not properly handle the case where the device is not complete free, and there is a free extent at the beginning of the device. Signed-off-by: Yan Zheng Signed-off-by: Chris Mason --- fs/btrfs/volumes.c | 10 +++++++--- 1 file changed, 7 insertions(+), 3 deletions(-) diff --git a/fs/btrfs/volumes.c b/fs/btrfs/volumes.c index 55c37276a29..074c1c56d8c 100644 --- a/fs/btrfs/volumes.c +++ b/fs/btrfs/volumes.c @@ -758,9 +758,13 @@ static noinline int find_free_dev_extent(struct btrfs_trans_handle *trans, ret = btrfs_search_slot(trans, root, &key, path, 0, 0); if (ret < 0) goto error; - ret = btrfs_previous_item(root, path, 0, key.type); - if (ret < 0) - goto error; + if (ret > 0) { + ret = btrfs_previous_item(root, path, key.objectid, key.type); + if (ret < 0) + goto error; + if (ret > 0) + start_found = 1; + } l = path->nodes[0]; btrfs_item_key_to_cpu(l, &key, path->slots[0]); while (1) { -- cgit v1.2.3 From 0a4eefbb745ec0e8a5b694ae3f40cc34082d8f61 Mon Sep 17 00:00:00 2001 From: Yan Zheng Date: Fri, 24 Jul 2009 11:06:53 -0400 Subject: Btrfs: Fix ordering of key field checks in btrfs_previous_item Check objectid of item before checking the item type, otherwise we may return zero for a key that is actually too low. Signed-off-by: Yan Zheng Signed-off-by: Chris Mason --- fs/btrfs/ctree.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/fs/btrfs/ctree.c b/fs/btrfs/ctree.c index 91572091c0a..978449af4cc 100644 --- a/fs/btrfs/ctree.c +++ b/fs/btrfs/ctree.c @@ -4296,10 +4296,10 @@ int btrfs_previous_item(struct btrfs_root *root, path->slots[0]--; btrfs_item_key_to_cpu(leaf, &found_key, path->slots[0]); - if (found_key.type == type) - return 0; if (found_key.objectid < min_objectid) break; + if (found_key.type == type) + return 0; if (found_key.objectid == min_objectid && found_key.type < type) break; -- cgit v1.2.3 From d717aa1d31c36cb56059e97966cb76f0be021969 Mon Sep 17 00:00:00 2001 From: Yan Zheng Date: Fri, 24 Jul 2009 12:42:46 -0400 Subject: Btrfs: Avoid delayed reference update looping btrfs_split_leaf and btrfs_del_items can end up in a loop where one is constantly spliting a given leaf and the other is constantly merging it back with the adjacent nodes. There is a better fix for this, but in the interest of something small, this patch just changes btrfs_del_items back to balancing less often. Signed-off-by: Chris Mason --- fs/btrfs/ctree.c | 5 +---- 1 file changed, 1 insertion(+), 4 deletions(-) diff --git a/fs/btrfs/ctree.c b/fs/btrfs/ctree.c index 978449af4cc..3fdcc0512d3 100644 --- a/fs/btrfs/ctree.c +++ b/fs/btrfs/ctree.c @@ -1040,9 +1040,6 @@ static noinline int balance_level(struct btrfs_trans_handle *trans, BTRFS_NODEPTRS_PER_BLOCK(root) / 4) return 0; - if (btrfs_header_nritems(mid) > 2) - return 0; - if (btrfs_header_nritems(mid) < 2) err_on_enospc = 1; @@ -3796,7 +3793,7 @@ int btrfs_del_items(struct btrfs_trans_handle *trans, struct btrfs_root *root, } /* delete the leaf if it is mostly empty */ - if (used < BTRFS_LEAF_DATA_SIZE(root) / 2) { + if (used < BTRFS_LEAF_DATA_SIZE(root) / 3) { /* push_leaf_left fixes the path. * make sure the path still points to our leaf * for possible call to del_ptr below -- cgit v1.2.3 From 36a516d953e02523e78ce27fbff91a968a9e5751 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Erik=20Andr=C3=A9n?= Date: Tue, 23 Jun 2009 12:22:48 -0300 Subject: V4L/DVB (12221): gspca - stv06xx-hdcs: Actually update the sensor state MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Signed-off-by: Erik Andrén Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/gspca/stv06xx/stv06xx_hdcs.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/drivers/media/video/gspca/stv06xx/stv06xx_hdcs.c b/drivers/media/video/gspca/stv06xx/stv06xx_hdcs.c index 3039ec208f3..ec7f5536a8a 100644 --- a/drivers/media/video/gspca/stv06xx/stv06xx_hdcs.c +++ b/drivers/media/video/gspca/stv06xx/stv06xx_hdcs.c @@ -174,7 +174,9 @@ static int hdcs_set_state(struct sd *sd, enum hdcs_power_state state) } ret = stv06xx_write_sensor(sd, HDCS_REG_CONTROL(sd), val); - if (ret < 0) + + /* Update the state if the write succeeded */ + if (!ret) hdcs->state = state; return ret; -- cgit v1.2.3 From ac51295ccc0ff922fea62cfc6f72cddf9c6c7306 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Erik=20Andr=C3=A9n?= Date: Wed, 24 Jun 2009 04:30:56 -0300 Subject: V4L/DVB (12222): gspca - stv06xx-hdcs: Fix sensor sequence bug MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit All hdcs registers use bit 0 as a read/write flag and needs to be shifted one bit to the left. This wasn't accounted for when doing a sequence of writes. Signed-off-by: Erik Andrén Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/gspca/stv06xx/stv06xx_hdcs.c | 8 +++++--- 1 file changed, 5 insertions(+), 3 deletions(-) diff --git a/drivers/media/video/gspca/stv06xx/stv06xx_hdcs.c b/drivers/media/video/gspca/stv06xx/stv06xx_hdcs.c index ec7f5536a8a..a45171be3f8 100644 --- a/drivers/media/video/gspca/stv06xx/stv06xx_hdcs.c +++ b/drivers/media/video/gspca/stv06xx/stv06xx_hdcs.c @@ -131,9 +131,11 @@ static int hdcs_reg_write_seq(struct sd *sd, u8 reg, u8 *vals, u8 len) (reg + len > 0xff))) return -EINVAL; - for (i = 0; i < len; i++, reg++) { - regs[2*i] = reg; - regs[2*i+1] = vals[i]; + for (i = 0; i < len; i++) { + regs[2 * i] = reg; + regs[2 * i + 1] = vals[i]; + /* All addresses are shifted left one bit as bit 0 toggles r/w */ + reg += 2; } return stv06xx_write_sensor_bytes(sd, regs, len); -- cgit v1.2.3 From c0ea8f5b7264c813ee885f02b663ee3106f98afe Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Erik=20Andr=C3=A9n?= Date: Wed, 1 Jul 2009 02:56:44 -0300 Subject: V4L/DVB (12223): gspca - stv06xx-hdcs: Correct the pixelformat MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Signed-off-by: Erik Andrén Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/gspca/stv06xx/stv06xx_hdcs.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/media/video/gspca/stv06xx/stv06xx_hdcs.c b/drivers/media/video/gspca/stv06xx/stv06xx_hdcs.c index a45171be3f8..e5024c8496e 100644 --- a/drivers/media/video/gspca/stv06xx/stv06xx_hdcs.c +++ b/drivers/media/video/gspca/stv06xx/stv06xx_hdcs.c @@ -64,7 +64,7 @@ static struct v4l2_pix_format hdcs1x00_mode[] = { { HDCS_1X00_DEF_WIDTH, HDCS_1X00_DEF_HEIGHT, - V4L2_PIX_FMT_SBGGR8, + V4L2_PIX_FMT_SGRBG8, V4L2_FIELD_NONE, .sizeimage = HDCS_1X00_DEF_WIDTH * HDCS_1X00_DEF_HEIGHT, @@ -80,7 +80,7 @@ static struct v4l2_pix_format hdcs1020_mode[] = { { HDCS_1020_DEF_WIDTH, HDCS_1020_DEF_HEIGHT, - V4L2_PIX_FMT_SBGGR8, + V4L2_PIX_FMT_SGRBG8, V4L2_FIELD_NONE, .sizeimage = HDCS_1020_DEF_WIDTH * HDCS_1020_DEF_HEIGHT, -- cgit v1.2.3 From 641f75caa874fffd679b64f850adee37103b0c0f Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Erik=20Andr=C3=A9n?= Date: Wed, 8 Jul 2009 14:47:16 -0300 Subject: V4L/DVB (12224): gspca - m5602-s5k4aa: Remove erroneous register writes MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit A couple of erroneous register writes snuck in that made the image go haywire. Remove these. Many thanks to Grégory Lardière for finding this out Signed-off-by: Erik Andrén Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/gspca/m5602/m5602_s5k4aa.c | 6 ------ 1 file changed, 6 deletions(-) diff --git a/drivers/media/video/gspca/m5602/m5602_s5k4aa.c b/drivers/media/video/gspca/m5602/m5602_s5k4aa.c index 191bcd71897..0163903d1c0 100644 --- a/drivers/media/video/gspca/m5602/m5602_s5k4aa.c +++ b/drivers/media/video/gspca/m5602/m5602_s5k4aa.c @@ -474,9 +474,6 @@ static int s5k4aa_set_vflip(struct gspca_dev *gspca_dev, __s32 val) PDEBUG(D_V4L2, "Set vertical flip to %d", val); err = m5602_write_sensor(sd, S5K4AA_PAGE_MAP, &data, 1); - if (err < 0) - return err; - err = m5602_write_sensor(sd, S5K4AA_READ_MODE, &data, 1); if (err < 0) return err; @@ -522,9 +519,6 @@ static int s5k4aa_set_hflip(struct gspca_dev *gspca_dev, __s32 val) PDEBUG(D_V4L2, "Set horizontal flip to %d", val); err = m5602_write_sensor(sd, S5K4AA_PAGE_MAP, &data, 1); - if (err < 0) - return err; - err = m5602_write_sensor(sd, S5K4AA_READ_MODE, &data, 1); if (err < 0) return err; -- cgit v1.2.3 From c43221df762c33e832e8855cae77989b6bf69fa6 Mon Sep 17 00:00:00 2001 From: Mauro Carvalho Chehab Date: Sun, 12 Jul 2009 10:23:23 -0300 Subject: V4L/DVB (12233): em28xx: rename is_27xx to is_webcam Just renames the flag, to use a clearer name. Later patches will use this flag to properly set some drivers behaviors for webcams. Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/em28xx/em28xx-cards.c | 4 ++-- drivers/media/video/em28xx/em28xx-core.c | 4 ++-- drivers/media/video/em28xx/em28xx-video.c | 4 ++-- drivers/media/video/em28xx/em28xx.h | 2 +- 4 files changed, 7 insertions(+), 7 deletions(-) diff --git a/drivers/media/video/em28xx/em28xx-cards.c b/drivers/media/video/em28xx/em28xx-cards.c index ebd24a25fb8..8f869468280 100644 --- a/drivers/media/video/em28xx/em28xx-cards.c +++ b/drivers/media/video/em28xx/em28xx-cards.c @@ -450,7 +450,7 @@ struct em28xx_board em28xx_boards[] = { [EM2820_BOARD_SILVERCREST_WEBCAM] = { .name = "Silvercrest Webcam 1.3mpix", .tuner_type = TUNER_ABSENT, - .is_27xx = 1, + .is_webcam = 1, .decoder = EM28XX_MT9V011, .input = { { .type = EM28XX_VMUX_COMPOSITE1, @@ -1772,7 +1772,7 @@ void em28xx_pre_card_setup(struct em28xx *dev) em28xx_info("chip ID is em2750\n"); break; case CHIP_ID_EM2820: - if (dev->board.is_27xx) + if (dev->board.is_webcam) em28xx_info("chip is em2710\n"); else em28xx_info("chip ID is em2820\n"); diff --git a/drivers/media/video/em28xx/em28xx-core.c b/drivers/media/video/em28xx/em28xx-core.c index 079ab4d563a..8649bdb7eb9 100644 --- a/drivers/media/video/em28xx/em28xx-core.c +++ b/drivers/media/video/em28xx/em28xx-core.c @@ -652,7 +652,7 @@ int em28xx_set_outfmt(struct em28xx *dev) outfmt = dev->format->reg; - if (dev->board.is_27xx) { + if (dev->board.is_webcam) { vinmode = 0x0d; vinctl = 0x00; } else { @@ -707,7 +707,7 @@ static int em28xx_scaler_set(struct em28xx *dev, u16 h, u16 v) u8 mode; /* the em2800 scaler only supports scaling down to 50% */ - if (dev->board.is_27xx) { + if (dev->board.is_webcam) { /* FIXME: Don't use the scaler yet */ mode = 0; } else if (dev->board.is_em2800) { diff --git a/drivers/media/video/em28xx/em28xx-video.c b/drivers/media/video/em28xx/em28xx-video.c index 14316c91217..89ab2e3b9a2 100644 --- a/drivers/media/video/em28xx/em28xx-video.c +++ b/drivers/media/video/em28xx/em28xx-video.c @@ -726,7 +726,7 @@ static int vidioc_try_fmt_vid_cap(struct file *file, void *priv, return -EINVAL; } - if (dev->board.is_27xx) { + if (dev->board.is_webcam) { /* FIXME: This is the only supported fmt */ width = 640; height = 480; @@ -768,7 +768,7 @@ static int em28xx_set_video_format(struct em28xx *dev, unsigned int fourcc, struct em28xx_fmt *fmt; /* FIXME: This is the only supported fmt */ - if (dev->board.is_27xx) { + if (dev->board.is_webcam) { width = 640; height = 480; } diff --git a/drivers/media/video/em28xx/em28xx.h b/drivers/media/video/em28xx/em28xx.h index d90fef46376..dc92e9ef85a 100644 --- a/drivers/media/video/em28xx/em28xx.h +++ b/drivers/media/video/em28xx/em28xx.h @@ -390,7 +390,7 @@ struct em28xx_board { unsigned int max_range_640_480:1; unsigned int has_dvb:1; unsigned int has_snapshot_button:1; - unsigned int is_27xx:1; + unsigned int is_webcam:1; unsigned int valid:1; unsigned char xclk, i2c_speed; -- cgit v1.2.3 From 8a2e6990f44d4cebaafcc0af1a786912ae733bb2 Mon Sep 17 00:00:00 2001 From: Mauro Carvalho Chehab Date: Sun, 12 Jul 2009 10:26:36 -0300 Subject: V4L/DVB (12234): em28xx-cards: use is_webcam flag for devices that are known to be webcams By having the webcam devices marked as such, it will help the em28xx driver to do the right thing on those devices. Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/em28xx/em28xx-cards.c | 12 ++++++++---- 1 file changed, 8 insertions(+), 4 deletions(-) diff --git a/drivers/media/video/em28xx/em28xx-cards.c b/drivers/media/video/em28xx/em28xx-cards.c index 8f869468280..9e71f034665 100644 --- a/drivers/media/video/em28xx/em28xx-cards.c +++ b/drivers/media/video/em28xx/em28xx-cards.c @@ -207,7 +207,8 @@ struct em28xx_board em28xx_boards[] = { [EM2750_BOARD_UNKNOWN] = { .name = "Unknown EM2750/EM2751 webcam grabber", .xclk = EM28XX_XCLK_FREQUENCY_48MHZ, - .tuner_type = TUNER_ABSENT, /* This is a webcam */ + .tuner_type = TUNER_ABSENT, + .is_webcam = 1, .input = { { .type = EM28XX_VMUX_COMPOSITE1, .vmux = 0, @@ -239,7 +240,8 @@ struct em28xx_board em28xx_boards[] = { .name = "Huaqi DLCW-130", .valid = EM28XX_BOARD_NOT_VALIDATED, .xclk = EM28XX_XCLK_FREQUENCY_48MHZ, - .tuner_type = TUNER_ABSENT, /* This is a webcam */ + .tuner_type = TUNER_ABSENT, + .is_webcam = 1, .input = { { .type = EM28XX_VMUX_COMPOSITE1, .vmux = 0, @@ -440,7 +442,8 @@ struct em28xx_board em28xx_boards[] = { [EM2820_BOARD_VIDEOLOGY_20K14XUSB] = { .name = "Videology 20K14XUSB USB2.0", .valid = EM28XX_BOARD_NOT_VALIDATED, - .tuner_type = TUNER_ABSENT, /* This is a webcam */ + .tuner_type = TUNER_ABSENT, + .is_webcam = 1, .input = { { .type = EM28XX_VMUX_COMPOSITE1, .vmux = 0, @@ -500,7 +503,8 @@ struct em28xx_board em28xx_boards[] = { /* Beijing Huaqi Information Digital Technology Co., Ltd */ .name = "NetGMBH Cam", .valid = EM28XX_BOARD_NOT_VALIDATED, - .tuner_type = TUNER_ABSENT, /* This is a webcam */ + .tuner_type = TUNER_ABSENT, + .is_webcam = 1, .input = { { .type = EM28XX_VMUX_COMPOSITE1, .vmux = 0, -- cgit v1.2.3 From 8b220793d6fd309176438721088515be893630cd Mon Sep 17 00:00:00 2001 From: Mauro Carvalho Chehab Date: Sun, 12 Jul 2009 10:56:21 -0300 Subject: V4L/DVB (12235): em28xx: detects sensors also with the generic em2750/2750 entry Webcams in general don't have eeprom. So, the sensor hint code should be called to properly detect what sensor is inside. Signed-off-by: Mauro Carvalho Chehab --- Documentation/video4linux/CARDLIST.em28xx | 2 +- drivers/media/video/em28xx/em28xx-cards.c | 9 +++++---- 2 files changed, 6 insertions(+), 5 deletions(-) diff --git a/Documentation/video4linux/CARDLIST.em28xx b/Documentation/video4linux/CARDLIST.em28xx index 014d255231f..68c236c0184 100644 --- a/Documentation/video4linux/CARDLIST.em28xx +++ b/Documentation/video4linux/CARDLIST.em28xx @@ -20,7 +20,7 @@ 19 -> EM2860/SAA711X Reference Design (em2860) 20 -> AMD ATI TV Wonder HD 600 (em2880) [0438:b002] 21 -> eMPIA Technology, Inc. GrabBeeX+ Video Encoder (em2800) [eb1a:2801] - 22 -> Unknown EM2750/EM2751 webcam grabber (em2750) [eb1a:2750,eb1a:2751] + 22 -> EM2710/EM2750/EM2751 webcam grabber (em2750) [eb1a:2750,eb1a:2751] 23 -> Huaqi DLCW-130 (em2750) 24 -> D-Link DUB-T210 TV Tuner (em2820/em2840) [2001:f112] 25 -> Gadmei UTV310 (em2820/em2840) diff --git a/drivers/media/video/em28xx/em28xx-cards.c b/drivers/media/video/em28xx/em28xx-cards.c index 9e71f034665..e64e1242a1b 100644 --- a/drivers/media/video/em28xx/em28xx-cards.c +++ b/drivers/media/video/em28xx/em28xx-cards.c @@ -205,7 +205,7 @@ static struct em28xx_reg_seq silvercrest_reg_seq[] = { */ struct em28xx_board em28xx_boards[] = { [EM2750_BOARD_UNKNOWN] = { - .name = "Unknown EM2750/EM2751 webcam grabber", + .name = "EM2710/EM2750/EM2751 webcam grabber", .xclk = EM28XX_XCLK_FREQUENCY_48MHZ, .tuner_type = TUNER_ABSENT, .is_webcam = 1, @@ -1720,7 +1720,8 @@ static int em28xx_hint_sensor(struct em28xx *dev) __be16 version_be; u16 version; - if (dev->model != EM2820_BOARD_UNKNOWN) + if (dev->model != EM2820_BOARD_UNKNOWN && + dev->model != EM2750_BOARD_UNKNOWN) return 0; dev->i2c_client.addr = 0xba >> 1; @@ -1738,11 +1739,11 @@ static int em28xx_hint_sensor(struct em28xx *dev) sensor_name = "mt9v011"; break; default: - printk("Unknown Sensor 0x%04x\n", be16_to_cpu(version)); + printk("Unknown Micron Sensor 0x%04x\n", be16_to_cpu(version)); return -EINVAL; } - em28xx_errdev("Sensor is %s, assuming that webcam is %s\n", + em28xx_errdev("Sensor is %s, using model %s entry.\n", sensor_name, em28xx_boards[dev->model].name); return 0; -- cgit v1.2.3 From 527f09a981e398331c2f8d8f7af83cd46e6a06cc Mon Sep 17 00:00:00 2001 From: Mauro Carvalho Chehab Date: Sun, 12 Jul 2009 11:04:15 -0300 Subject: V4L/DVB (12236): em28xx: stop abusing of board->decoder for sensor information Instead of using em28xx board decoder field for storing sensor information, let's use instead a separate field for it. Also, as sensors are currently autodetected, there's no need of having it at the boards description. So, move it to the main em28xx struct. Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/em28xx/em28xx-cards.c | 4 ++-- drivers/media/video/em28xx/em28xx.h | 8 +++++++- 2 files changed, 9 insertions(+), 3 deletions(-) diff --git a/drivers/media/video/em28xx/em28xx-cards.c b/drivers/media/video/em28xx/em28xx-cards.c index e64e1242a1b..530170ae016 100644 --- a/drivers/media/video/em28xx/em28xx-cards.c +++ b/drivers/media/video/em28xx/em28xx-cards.c @@ -454,7 +454,6 @@ struct em28xx_board em28xx_boards[] = { .name = "Silvercrest Webcam 1.3mpix", .tuner_type = TUNER_ABSENT, .is_webcam = 1, - .decoder = EM28XX_MT9V011, .input = { { .type = EM28XX_VMUX_COMPOSITE1, .vmux = 0, @@ -1737,6 +1736,7 @@ static int em28xx_hint_sensor(struct em28xx *dev) case MT9V011_VERSION: dev->model = EM2820_BOARD_SILVERCREST_WEBCAM; sensor_name = "mt9v011"; + dev->em28xx_sensor = EM28XX_MT9V011; break; default: printk("Unknown Micron Sensor 0x%04x\n", be16_to_cpu(version)); @@ -2267,7 +2267,7 @@ void em28xx_card_setup(struct em28xx *dev) v4l2_i2c_new_probed_subdev(&dev->v4l2_dev, &dev->i2c_adap, "tvp5150", "tvp5150", tvp5150_addrs); - if (dev->board.decoder == EM28XX_MT9V011) + if (dev->em28xx_sensor == EM28XX_MT9V011) v4l2_i2c_new_probed_subdev(&dev->v4l2_dev, &dev->i2c_adap, "mt9v011", "mt9v011", mt9v011_addrs); diff --git a/drivers/media/video/em28xx/em28xx.h b/drivers/media/video/em28xx/em28xx.h index dc92e9ef85a..655dd78cc07 100644 --- a/drivers/media/video/em28xx/em28xx.h +++ b/drivers/media/video/em28xx/em28xx.h @@ -358,9 +358,13 @@ struct em28xx_input { #define INPUT(nr) (&em28xx_boards[dev->model].input[nr]) enum em28xx_decoder { - EM28XX_NODECODER, + EM28XX_NODECODER = 0, EM28XX_TVP5150, EM28XX_SAA711X, +}; + +enum em28xx_sensor { + EM28XX_NOSENSOR = 0, EM28XX_MT9V011, }; @@ -474,6 +478,8 @@ struct em28xx { struct v4l2_device v4l2_dev; struct em28xx_board board; + enum em28xx_sensor em28xx_sensor; + unsigned int stream_on:1; /* Locks streams */ unsigned int has_audio_class:1; unsigned int has_alsa_audio:1; -- cgit v1.2.3 From 9873740b2f41b37ec074afd4b8910b87dbebc0db Mon Sep 17 00:00:00 2001 From: Mauro Carvalho Chehab Date: Mon, 13 Jul 2009 01:03:37 -0300 Subject: V4L/DVB (12237): mt9v011: implement VIDIOC_QUERYCTRL Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/mt9v011.c | 18 ++++++++++++++++++ 1 file changed, 18 insertions(+) diff --git a/drivers/media/video/mt9v011.c b/drivers/media/video/mt9v011.c index 1fe8fc9183a..241382f5ba2 100644 --- a/drivers/media/video/mt9v011.c +++ b/drivers/media/video/mt9v011.c @@ -215,6 +215,23 @@ static int mt9v011_g_ctrl(struct v4l2_subdev *sd, struct v4l2_control *ctrl) return -EINVAL; } +static int mt9v011_queryctrl(struct v4l2_subdev *sd, struct v4l2_queryctrl *qc) +{ + int i; + + v4l2_dbg(1, debug, sd, "queryctrl called\n"); + + for (i = 0; i < ARRAY_SIZE(mt9v011_qctrl); i++) + if (qc->id && qc->id == mt9v011_qctrl[i].id) { + memcpy(qc, &(mt9v011_qctrl[i]), + sizeof(*qc)); + return 0; + } + + return -EINVAL; +} + + static int mt9v011_s_ctrl(struct v4l2_subdev *sd, struct v4l2_control *ctrl) { struct mt9v011 *core = to_mt9v011(sd); @@ -338,6 +355,7 @@ static int mt9v011_g_chip_ident(struct v4l2_subdev *sd, } static const struct v4l2_subdev_core_ops mt9v011_core_ops = { + .queryctrl = mt9v011_queryctrl, .g_ctrl = mt9v011_g_ctrl, .s_ctrl = mt9v011_s_ctrl, .reset = mt9v011_reset, -- cgit v1.2.3 From b04fb6615285d18df34ffd6cdd51db7a8a78dda0 Mon Sep 17 00:00:00 2001 From: Mauro Carvalho Chehab Date: Mon, 13 Jul 2009 01:28:21 -0300 Subject: V4L/DVB (12238): em28xx: call sensor detection code for all webcam entries With the previous approach, autodetection were working only for the two generic entries (em275x and em2820 unknown ones). So, if someone would try to force probing an specific device, the code would not properly run the autodetection code. With the new approach, the sensor autodetection will be run not only for the two generic entries, but also do webcam specific ones. Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/em28xx/em28xx-cards.c | 18 +++++++++--------- 1 file changed, 9 insertions(+), 9 deletions(-) diff --git a/drivers/media/video/em28xx/em28xx-cards.c b/drivers/media/video/em28xx/em28xx-cards.c index 530170ae016..1318766b35b 100644 --- a/drivers/media/video/em28xx/em28xx-cards.c +++ b/drivers/media/video/em28xx/em28xx-cards.c @@ -234,6 +234,7 @@ struct em28xx_board em28xx_boards[] = { [EM2820_BOARD_UNKNOWN] = { .name = "Unknown EM2750/28xx video grabber", .tuner_type = TUNER_ABSENT, + .is_webcam = 1, /* To enable sensor probe */ }, [EM2750_BOARD_DLCW_130] = { /* Beijing Huaqi Information Digital Technology Co., Ltd */ @@ -1719,10 +1720,6 @@ static int em28xx_hint_sensor(struct em28xx *dev) __be16 version_be; u16 version; - if (dev->model != EM2820_BOARD_UNKNOWN && - dev->model != EM2750_BOARD_UNKNOWN) - return 0; - dev->i2c_client.addr = 0xba >> 1; cmd = 0; i2c_master_send(&dev->i2c_client, &cmd, 1); @@ -1777,10 +1774,7 @@ void em28xx_pre_card_setup(struct em28xx *dev) em28xx_info("chip ID is em2750\n"); break; case CHIP_ID_EM2820: - if (dev->board.is_webcam) - em28xx_info("chip is em2710\n"); - else - em28xx_info("chip ID is em2820\n"); + em28xx_info("chip ID is em2710 or em2820\n"); break; case CHIP_ID_EM2840: em28xx_info("chip ID is em2840\n"); @@ -2415,7 +2409,13 @@ static int em28xx_init_dev(struct em28xx **devhandle, struct usb_device *udev, return errCode; } - em28xx_hint_sensor(dev); + /* + * If the device can be a webcam, seek for a sensor. + * If sensor is not found, then it isn't a webcam. + */ + if (dev->board.is_webcam) + if (em28xx_hint_sensor(dev) < 0) + dev->board.is_webcam = 0; /* Do board specific init and eeprom reading */ em28xx_card_setup(dev); -- cgit v1.2.3 From 5569996421fa1cfc1fc0d9e683ac1def46ea985d Mon Sep 17 00:00:00 2001 From: Mauro Carvalho Chehab Date: Mon, 13 Jul 2009 20:15:02 -0300 Subject: V4L/DVB (12239): em28xx: fix webcam scaling While trying to fix an mt9v001 webcam, I noticed that HSCALE/VSCALE do work with em28xx + webcam. The issue is that the scaling setup depends on the number of visible rows/cols of the input image. With mt9v011 (Silvercrest), the resolution is 640x480. So, the scaling is different from a normal TV image (720x480 on NTSC). This were causing a wrong scaling and a previous patch disabled scaling. As each sensor have their different resolution setting, the xres/yres should be adjusted accordingly with the input sensor. Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/em28xx/em28xx-cards.c | 6 +++--- drivers/media/video/em28xx/em28xx-core.c | 5 +---- drivers/media/video/em28xx/em28xx-video.c | 16 +++------------- drivers/media/video/em28xx/em28xx.h | 15 +++++++++++---- 4 files changed, 18 insertions(+), 24 deletions(-) diff --git a/drivers/media/video/em28xx/em28xx-cards.c b/drivers/media/video/em28xx/em28xx-cards.c index 1318766b35b..d4a7e6075cc 100644 --- a/drivers/media/video/em28xx/em28xx-cards.c +++ b/drivers/media/video/em28xx/em28xx-cards.c @@ -58,8 +58,6 @@ static unsigned int card[] = {[0 ... (EM28XX_MAXBOARDS - 1)] = UNSET }; module_param_array(card, int, NULL, 0444); MODULE_PARM_DESC(card, "card type"); -#define MT9V011_VERSION 0x8243 - /* Bitmask marking allocated devices from 0 to EM28XX_MAXBOARDS */ static unsigned long em28xx_devused; @@ -1730,10 +1728,12 @@ static int em28xx_hint_sensor(struct em28xx *dev) version = be16_to_cpu(version_be); switch (version) { - case MT9V011_VERSION: + case 0x8243: /* mt9v011 640x480 1.3 Mpix sensor */ dev->model = EM2820_BOARD_SILVERCREST_WEBCAM; sensor_name = "mt9v011"; dev->em28xx_sensor = EM28XX_MT9V011; + dev->sensor_xres = 640; + dev->sensor_yres = 480; break; default: printk("Unknown Micron Sensor 0x%04x\n", be16_to_cpu(version)); diff --git a/drivers/media/video/em28xx/em28xx-core.c b/drivers/media/video/em28xx/em28xx-core.c index 8649bdb7eb9..c7fcce71394 100644 --- a/drivers/media/video/em28xx/em28xx-core.c +++ b/drivers/media/video/em28xx/em28xx-core.c @@ -707,10 +707,7 @@ static int em28xx_scaler_set(struct em28xx *dev, u16 h, u16 v) u8 mode; /* the em2800 scaler only supports scaling down to 50% */ - if (dev->board.is_webcam) { - /* FIXME: Don't use the scaler yet */ - mode = 0; - } else if (dev->board.is_em2800) { + if (dev->board.is_em2800) { mode = (v ? 0x20 : 0x00) | (h ? 0x10 : 0x00); } else { u8 buf[2]; diff --git a/drivers/media/video/em28xx/em28xx-video.c b/drivers/media/video/em28xx/em28xx-video.c index 89ab2e3b9a2..ff37b4c15f4 100644 --- a/drivers/media/video/em28xx/em28xx-video.c +++ b/drivers/media/video/em28xx/em28xx-video.c @@ -657,8 +657,8 @@ static void get_scale(struct em28xx *dev, unsigned int width, unsigned int height, unsigned int *hscale, unsigned int *vscale) { - unsigned int maxw = norm_maxw(dev); - unsigned int maxh = norm_maxh(dev); + unsigned int maxw = norm_maxw(dev); + unsigned int maxh = norm_maxh(dev); *hscale = (((unsigned long)maxw) << 12) / width - 4096L; if (*hscale >= 0x4000) @@ -726,11 +726,7 @@ static int vidioc_try_fmt_vid_cap(struct file *file, void *priv, return -EINVAL; } - if (dev->board.is_webcam) { - /* FIXME: This is the only supported fmt */ - width = 640; - height = 480; - } else if (dev->board.is_em2800) { + if (dev->board.is_em2800) { /* the em2800 can only scale down to 50% */ height = height > (3 * maxh / 4) ? maxh : maxh / 2; width = width > (3 * maxw / 4) ? maxw : maxw / 2; @@ -767,12 +763,6 @@ static int em28xx_set_video_format(struct em28xx *dev, unsigned int fourcc, { struct em28xx_fmt *fmt; - /* FIXME: This is the only supported fmt */ - if (dev->board.is_webcam) { - width = 640; - height = 480; - } - fmt = format_by_fourcc(fourcc); if (!fmt) return -EINVAL; diff --git a/drivers/media/video/em28xx/em28xx.h b/drivers/media/video/em28xx/em28xx.h index 655dd78cc07..71444ddbe40 100644 --- a/drivers/media/video/em28xx/em28xx.h +++ b/drivers/media/video/em28xx/em28xx.h @@ -479,6 +479,7 @@ struct em28xx { struct em28xx_board board; enum em28xx_sensor em28xx_sensor; + int sensor_xres, sensor_yres; unsigned int stream_on:1; /* Locks streams */ unsigned int has_audio_class:1; @@ -760,17 +761,23 @@ static inline int em28xx_gamma_set(struct em28xx *dev, s32 val) /*FIXME: maxw should be dependent of alt mode */ static inline unsigned int norm_maxw(struct em28xx *dev) { + if (dev->board.is_webcam) + return dev->sensor_xres; + if (dev->board.max_range_640_480) return 640; - else - return 720; + + return 720; } static inline unsigned int norm_maxh(struct em28xx *dev) { + if (dev->board.is_webcam) + return dev->sensor_yres; + if (dev->board.max_range_640_480) return 480; - else - return (dev->norm & V4L2_STD_625_50) ? 576 : 480; + + return (dev->norm & V4L2_STD_625_50) ? 576 : 480; } #endif -- cgit v1.2.3 From e11206e67f738b04d0c508795adc9bff504bc875 Mon Sep 17 00:00:00 2001 From: Mauro Carvalho Chehab Date: Tue, 14 Jul 2009 02:38:18 -0300 Subject: V4L/DVB (12240): mt9v011: add a function to calculate frames per second rate It is possible to adjust the fps rate by changing some register values. This is function of the connected Xtal at the camera sensor, being a 27 MHz cristal needed, in order to support 640x480 at 30 fps. For now, it will only calculate the values for fps. Later patches may introduce V4L2 ioctls, to allow frequency rate adjustments. Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/mt9v011.c | 32 +++++++++++++++++++++++++++++++- 1 file changed, 31 insertions(+), 1 deletion(-) diff --git a/drivers/media/video/mt9v011.c b/drivers/media/video/mt9v011.c index 241382f5ba2..f7b5279a7d5 100644 --- a/drivers/media/video/mt9v011.c +++ b/drivers/media/video/mt9v011.c @@ -8,6 +8,7 @@ #include #include #include +#include #include #include "mt9v011.h" #include @@ -57,6 +58,7 @@ static struct v4l2_queryctrl mt9v011_qctrl[] = { struct mt9v011 { struct v4l2_subdev sd; unsigned width, height; + unsigned xtal; u16 global_gain, red_bal, blue_bal; }; @@ -131,7 +133,7 @@ static const struct i2c_reg_value mt9v011_init_default[] = { { R1E_MT9V011_DIGITAL_ZOOM, 0x0000 }, { R20_MT9V011_READ_MODE, 0x1000 }, - { R07_MT9V011_OUT_CTRL, 0x000a }, /* chip enable */ + { R07_MT9V011_OUT_CTRL, 0x0002 }, /* chip enable */ }; static void set_balance(struct v4l2_subdev *sd) @@ -154,6 +156,31 @@ static void set_balance(struct v4l2_subdev *sd) mt9v011_write(sd, R2D_MT9V011_RED_GAIN, red_gain); } +static void calc_fps(struct v4l2_subdev *sd) +{ + struct mt9v011 *core = to_mt9v011(sd); + unsigned height, width, hblank, vblank, speed; + unsigned row_time, t_time; + u64 frames_per_ms; + unsigned tmp; + + height = mt9v011_read(sd, R03_MT9V011_HEIGHT); + width = mt9v011_read(sd, R04_MT9V011_WIDTH); + hblank = mt9v011_read(sd, R05_MT9V011_HBLANK); + vblank = mt9v011_read(sd, R06_MT9V011_VBLANK); + speed = mt9v011_read(sd, R0A_MT9V011_CLK_SPEED); + + row_time = (width + 113 + hblank) * (speed + 2); + t_time = row_time * (height + vblank + 1); + + frames_per_ms = core->xtal * 1000l; + do_div(frames_per_ms, t_time); + tmp = frames_per_ms; + + v4l2_dbg(1, debug, sd, "Programmed to %u.%03u fps (%d pixel clcks)\n", + tmp / 1000, tmp % 1000, t_time); +} + static void set_res(struct v4l2_subdev *sd) { struct mt9v011 *core = to_mt9v011(sd); @@ -179,6 +206,8 @@ static void set_res(struct v4l2_subdev *sd) mt9v011_write(sd, R01_MT9V011_ROWSTART, vstart); mt9v011_write(sd, R03_MT9V011_HEIGHT, core->height); mt9v011_write(sd, R06_MT9V011_VBLANK, 508 - core->height); + + calc_fps(sd); }; static int mt9v011_reset(struct v4l2_subdev *sd, u32 val) @@ -413,6 +442,7 @@ static int mt9v011_probe(struct i2c_client *c, core->global_gain = 0x0024; core->width = 640; core->height = 480; + core->xtal = 27000000; /* Hz */ v4l_info(c, "chip found @ 0x%02x (%s)\n", c->addr << 1, c->adapter->name); -- cgit v1.2.3 From c180604a87c5abb0a117998009d01a4499d58653 Mon Sep 17 00:00:00 2001 From: Mauro Carvalho Chehab Date: Tue, 14 Jul 2009 02:39:19 -0300 Subject: V4L/DVB (12241): mt9v011: Fix vstart vstart calculus were wrong. Fix it. Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/mt9v011.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/media/video/mt9v011.c b/drivers/media/video/mt9v011.c index f7b5279a7d5..d7b15dd836e 100644 --- a/drivers/media/video/mt9v011.c +++ b/drivers/media/video/mt9v011.c @@ -202,7 +202,7 @@ static void set_res(struct v4l2_subdev *sd) mt9v011_write(sd, R04_MT9V011_WIDTH, core->width); mt9v011_write(sd, R05_MT9V011_HBLANK, 771 - core->width); - vstart = 8 + (640 - core->height) / 2; + vstart = 8 + (480 - core->height) / 2; mt9v011_write(sd, R01_MT9V011_ROWSTART, vstart); mt9v011_write(sd, R03_MT9V011_HEIGHT, core->height); mt9v011_write(sd, R06_MT9V011_VBLANK, 508 - core->height); -- cgit v1.2.3 From 2ea472ff704a8a94b3b9abec438db23e512be337 Mon Sep 17 00:00:00 2001 From: Mauro Carvalho Chehab Date: Tue, 14 Jul 2009 03:14:21 -0300 Subject: V4L/DVB (12242): mt9v011: implement core->s_config to allow adjusting xtal frequency Since frames per second is a function of cristal frequency, and this is device-specific, add a function that allows adjusting it, via subdev->core->s_config callback. Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/mt9v011.c | 17 +++++++++++++++++ 1 file changed, 17 insertions(+) diff --git a/drivers/media/video/mt9v011.c b/drivers/media/video/mt9v011.c index d7b15dd836e..b2260de645f 100644 --- a/drivers/media/video/mt9v011.c +++ b/drivers/media/video/mt9v011.c @@ -340,6 +340,22 @@ static int mt9v011_s_fmt(struct v4l2_subdev *sd, struct v4l2_format *fmt) return 0; } +static int mt9v011_s_config(struct v4l2_subdev *sd, int dumb, void *data) +{ + struct mt9v011 *core = to_mt9v011(sd); + unsigned *xtal = data; + + v4l2_dbg(1, debug, sd, "s_config called\n"); + + if (xtal) { + core->xtal = *xtal; + v4l2_dbg(1, debug, sd, "xtal set to %d.%03d MHz\n", + *xtal / 1000000, (*xtal / 1000) % 1000); + } + + return 0; +} + #ifdef CONFIG_VIDEO_ADV_DEBUG static int mt9v011_g_register(struct v4l2_subdev *sd, @@ -388,6 +404,7 @@ static const struct v4l2_subdev_core_ops mt9v011_core_ops = { .g_ctrl = mt9v011_g_ctrl, .s_ctrl = mt9v011_s_ctrl, .reset = mt9v011_reset, + .s_config = mt9v011_s_config, .g_chip_ident = mt9v011_g_chip_ident, #ifdef CONFIG_VIDEO_ADV_DEBUG .g_register = mt9v011_g_register, -- cgit v1.2.3 From d36bb4e77257ed0df86deca3f69794f037f68c7d Mon Sep 17 00:00:00 2001 From: Mauro Carvalho Chehab Date: Tue, 14 Jul 2009 03:18:39 -0300 Subject: V4L/DVB (12243): em28xx: allow specifying sensor xtal frequency In order to properly estimate fps, mt9v011 sensor driver needs to know what is the used frequency on the sensor cristal. Adds the proper fields and initialization code for specifying the cristal frequency. Also, based on experimentation, it was noticed that the Silvercrest is outputing data at 7 fps. This means that it should be using a 6.3 MHz cristal. This information needs to be double checked later, by opening the device. Anyway, by using this value for xtal, at least now we have the correct fps report. Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/em28xx/em28xx-cards.c | 11 ++++++++--- drivers/media/video/em28xx/em28xx.h | 2 ++ 2 files changed, 10 insertions(+), 3 deletions(-) diff --git a/drivers/media/video/em28xx/em28xx-cards.c b/drivers/media/video/em28xx/em28xx-cards.c index d4a7e6075cc..82536dd6b0f 100644 --- a/drivers/media/video/em28xx/em28xx-cards.c +++ b/drivers/media/video/em28xx/em28xx-cards.c @@ -1734,6 +1734,7 @@ static int em28xx_hint_sensor(struct em28xx *dev) dev->em28xx_sensor = EM28XX_MT9V011; dev->sensor_xres = 640; dev->sensor_yres = 480; + dev->sensor_xtal = 6300000; break; default: printk("Unknown Micron Sensor 0x%04x\n", be16_to_cpu(version)); @@ -2261,9 +2262,13 @@ void em28xx_card_setup(struct em28xx *dev) v4l2_i2c_new_probed_subdev(&dev->v4l2_dev, &dev->i2c_adap, "tvp5150", "tvp5150", tvp5150_addrs); - if (dev->em28xx_sensor == EM28XX_MT9V011) - v4l2_i2c_new_probed_subdev(&dev->v4l2_dev, &dev->i2c_adap, - "mt9v011", "mt9v011", mt9v011_addrs); + if (dev->em28xx_sensor == EM28XX_MT9V011) { + struct v4l2_subdev *sd; + + sd = v4l2_i2c_new_probed_subdev(&dev->v4l2_dev, + &dev->i2c_adap, "mt9v011", "mt9v011", mt9v011_addrs); + v4l2_subdev_call(sd, core, s_config, 0, &dev->sensor_xtal); + } if (dev->board.adecoder == EM28XX_TVAUDIO) v4l2_i2c_new_subdev(&dev->v4l2_dev, &dev->i2c_adap, diff --git a/drivers/media/video/em28xx/em28xx.h b/drivers/media/video/em28xx/em28xx.h index 71444ddbe40..ce76633786c 100644 --- a/drivers/media/video/em28xx/em28xx.h +++ b/drivers/media/video/em28xx/em28xx.h @@ -478,8 +478,10 @@ struct em28xx { struct v4l2_device v4l2_dev; struct em28xx_board board; + /* Webcam specific fields */ enum em28xx_sensor em28xx_sensor; int sensor_xres, sensor_yres; + int sensor_xtal; unsigned int stream_on:1; /* Locks streams */ unsigned int has_audio_class:1; -- cgit v1.2.3 From 579d315218e8a3f696e375c5f6917da6488bec8a Mon Sep 17 00:00:00 2001 From: Mauro Carvalho Chehab Date: Tue, 14 Jul 2009 12:33:25 -0300 Subject: V4L/DVB (12244): em28xx: adjust vinmode/vinctl based on the stream input format Depending on the video input format, vinmode/vinctl needs adjustments. For TV, this is not relevant, since the supported decoders output data at the same format. However, webcam sensors may have different formats, so, this needs to be adjusted based on the device. Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/em28xx/em28xx-cards.c | 11 +++++++++++ drivers/media/video/em28xx/em28xx-core.c | 17 +++-------------- drivers/media/video/em28xx/em28xx.h | 3 +++ 3 files changed, 17 insertions(+), 14 deletions(-) diff --git a/drivers/media/video/em28xx/em28xx-cards.c b/drivers/media/video/em28xx/em28xx-cards.c index 82536dd6b0f..e793aee1672 100644 --- a/drivers/media/video/em28xx/em28xx-cards.c +++ b/drivers/media/video/em28xx/em28xx-cards.c @@ -1735,6 +1735,11 @@ static int em28xx_hint_sensor(struct em28xx *dev) dev->sensor_xres = 640; dev->sensor_yres = 480; dev->sensor_xtal = 6300000; + + /* probably means GRGB 16 bit bayer */ + dev->vinmode = 0x0d; + dev->vinctl = 0x00; + break; default: printk("Unknown Micron Sensor 0x%04x\n", be16_to_cpu(version)); @@ -2414,6 +2419,12 @@ static int em28xx_init_dev(struct em28xx **devhandle, struct usb_device *udev, return errCode; } + /* + * Default format, used for tvp5150 or saa711x output formats + */ + dev->vinmode = 0x10; + dev->vinctl = 0x11; + /* * If the device can be a webcam, seek for a sensor. * If sensor is not found, then it isn't a webcam. diff --git a/drivers/media/video/em28xx/em28xx-core.c b/drivers/media/video/em28xx/em28xx-core.c index c7fcce71394..5b78e199abd 100644 --- a/drivers/media/video/em28xx/em28xx-core.c +++ b/drivers/media/video/em28xx/em28xx-core.c @@ -648,28 +648,17 @@ int em28xx_capture_start(struct em28xx *dev, int start) int em28xx_set_outfmt(struct em28xx *dev) { int ret; - int vinmode, vinctl, outfmt; - - outfmt = dev->format->reg; - - if (dev->board.is_webcam) { - vinmode = 0x0d; - vinctl = 0x00; - } else { - vinmode = 0x10; - vinctl = 0x11; - } ret = em28xx_write_reg_bits(dev, EM28XX_R27_OUTFMT, - outfmt | 0x20, 0xff); + dev->format->reg | 0x20, 0xff); if (ret < 0) return ret; - ret = em28xx_write_reg(dev, EM28XX_R10_VINMODE, vinmode); + ret = em28xx_write_reg(dev, EM28XX_R10_VINMODE, dev->vinmode); if (ret < 0) return ret; - return em28xx_write_reg(dev, EM28XX_R11_VINCTRL, vinctl); + return em28xx_write_reg(dev, EM28XX_R11_VINCTRL, dev->vinctl); } static int em28xx_accumulator_set(struct em28xx *dev, u8 xmin, u8 xmax, diff --git a/drivers/media/video/em28xx/em28xx.h b/drivers/media/video/em28xx/em28xx.h index ce76633786c..766ab59b8d5 100644 --- a/drivers/media/video/em28xx/em28xx.h +++ b/drivers/media/video/em28xx/em28xx.h @@ -483,6 +483,9 @@ struct em28xx { int sensor_xres, sensor_yres; int sensor_xtal; + /* Vinmode/Vinctl used at the driver */ + int vinmode, vinctl; + unsigned int stream_on:1; /* Locks streams */ unsigned int has_audio_class:1; unsigned int has_alsa_audio:1; -- cgit v1.2.3 From b80fd2d811b48a92051f86d257b00f373e69a6d7 Mon Sep 17 00:00:00 2001 From: Mauro Carvalho Chehab Date: Tue, 14 Jul 2009 21:08:22 -0300 Subject: V4L/DVB (12245): em28xx: add support for mt9m001 webcams Thanks to Wally for bringing the issue and helping with the tests. Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/em28xx/em28xx-cards.c | 41 +++++++++++++++++++++++++++++++ drivers/media/video/em28xx/em28xx.h | 1 + 2 files changed, 42 insertions(+) diff --git a/drivers/media/video/em28xx/em28xx-cards.c b/drivers/media/video/em28xx/em28xx-cards.c index e793aee1672..1bd789a52e6 100644 --- a/drivers/media/video/em28xx/em28xx-cards.c +++ b/drivers/media/video/em28xx/em28xx-cards.c @@ -211,6 +211,7 @@ struct em28xx_board em28xx_boards[] = { .type = EM28XX_VMUX_COMPOSITE1, .vmux = 0, .amux = EM28XX_AMUX_VIDEO, + .gpio = silvercrest_reg_seq, } }, }, [EM2800_BOARD_UNKNOWN] = { @@ -1706,6 +1707,32 @@ static inline void em28xx_set_model(struct em28xx *dev) EM28XX_I2C_FREQ_100_KHZ; } +/* FIXME: Should be replaced by a proper mt9m001 driver */ +static int em28xx_initialize_mt9m001(struct em28xx *dev) +{ + int i; + unsigned char regs[][3] = { + { 0x0d, 0x00, 0x01, }, + { 0x0d, 0x00, 0x00, }, + { 0x04, 0x05, 0x00, }, /* hres = 1280 */ + { 0x03, 0x04, 0x00, }, /* vres = 1024 */ + { 0x20, 0x11, 0x00, }, + { 0x06, 0x00, 0x10, }, + { 0x2b, 0x00, 0x24, }, + { 0x2e, 0x00, 0x24, }, + { 0x35, 0x00, 0x24, }, + { 0x2d, 0x00, 0x20, }, + { 0x2c, 0x00, 0x20, }, + { 0x09, 0x0a, 0xd4, }, + { 0x35, 0x00, 0x57, }, + }; + + for (i = 0; i < ARRAY_SIZE(regs); i++) + i2c_master_send(&dev->i2c_client, ®s[i][0], 3); + + return 0; +} + /* HINT method: webcam I2C chips * * This method work for webcams with Micron sensors @@ -1740,6 +1767,19 @@ static int em28xx_hint_sensor(struct em28xx *dev) dev->vinmode = 0x0d; dev->vinctl = 0x00; + break; + case 0x8431: + dev->model = EM2750_BOARD_UNKNOWN; + sensor_name = "mt9m001"; + dev->em28xx_sensor = EM28XX_MT9M001; + em28xx_initialize_mt9m001(dev); + dev->sensor_xres = 1280; + dev->sensor_yres = 1024; + + /* probably means BGGR 16 bit bayer */ + dev->vinmode = 0x0c; + dev->vinctl = 0x00; + break; default: printk("Unknown Micron Sensor 0x%04x\n", be16_to_cpu(version)); @@ -2275,6 +2315,7 @@ void em28xx_card_setup(struct em28xx *dev) v4l2_subdev_call(sd, core, s_config, 0, &dev->sensor_xtal); } + if (dev->board.adecoder == EM28XX_TVAUDIO) v4l2_i2c_new_subdev(&dev->v4l2_dev, &dev->i2c_adap, "tvaudio", "tvaudio", dev->board.tvaudio_addr); diff --git a/drivers/media/video/em28xx/em28xx.h b/drivers/media/video/em28xx/em28xx.h index 766ab59b8d5..45bd513f62d 100644 --- a/drivers/media/video/em28xx/em28xx.h +++ b/drivers/media/video/em28xx/em28xx.h @@ -366,6 +366,7 @@ enum em28xx_decoder { enum em28xx_sensor { EM28XX_NOSENSOR = 0, EM28XX_MT9V011, + EM28XX_MT9M001, }; enum em28xx_adecoder { -- cgit v1.2.3 From 4fb202a8d9d936f7080ab631140b447a0625e36c Mon Sep 17 00:00:00 2001 From: Devin Heitmueller Date: Sun, 12 Jul 2009 17:51:12 -0300 Subject: V4L/DVB (12257): em28xx: make tuning work for Terratec Cinergy T XS USB (mt352 variant) The Terratec Cinergy T XS USB can have either a zl10353 or an mt352. Add support for the MT352 variant. Thanks to Jelle de Jong for providing a unit to test/debug with. Cc: Jelle de Jong Signed-off-by: Devin Heitmueller Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/em28xx/em28xx-dvb.c | 47 ++++++++++++++++++++++++++++----- 1 file changed, 41 insertions(+), 6 deletions(-) diff --git a/drivers/media/video/em28xx/em28xx-dvb.c b/drivers/media/video/em28xx/em28xx-dvb.c index 3da97c32b8f..d57f7583ac6 100644 --- a/drivers/media/video/em28xx/em28xx-dvb.c +++ b/drivers/media/video/em28xx/em28xx-dvb.c @@ -31,6 +31,8 @@ #include "lgdt330x.h" #include "zl10353.h" #include "s5h1409.h" +#include "mt352.h" +#include "mt352_priv.h" /* FIXME */ MODULE_DESCRIPTION("driver for em28xx based DVB cards"); MODULE_AUTHOR("Mauro Carvalho Chehab "); @@ -258,6 +260,41 @@ static struct drx397xD_config em28xx_drx397xD_with_xc3028 = { }; #endif +static int mt352_terratec_xs_init(struct dvb_frontend *fe) +{ + /* Values extracted from a USB trace of the Terratec Windows driver */ + static u8 clock_config[] = { CLOCK_CTL, 0x38, 0x2c }; + static u8 reset[] = { RESET, 0x80 }; + static u8 adc_ctl_1_cfg[] = { ADC_CTL_1, 0x40 }; + static u8 agc_cfg[] = { AGC_TARGET, 0x28, 0xa0 }; + static u8 input_freq_cfg[] = { INPUT_FREQ_1, 0x31, 0xb8 }; + static u8 rs_err_cfg[] = { RS_ERR_PER_1, 0x00, 0x4d }; + static u8 capt_range_cfg[] = { CAPT_RANGE, 0x32 }; + static u8 trl_nom_cfg[] = { TRL_NOMINAL_RATE_1, 0x64, 0x00 }; + static u8 tps_given_cfg[] = { TPS_GIVEN_1, 0x40, 0x80, 0x50 }; + static u8 tuner_go[] = { TUNER_GO, 0x5d}; + + mt352_write(fe, clock_config, sizeof(clock_config)); + udelay(200); + mt352_write(fe, reset, sizeof(reset)); + mt352_write(fe, adc_ctl_1_cfg, sizeof(adc_ctl_1_cfg)); + mt352_write(fe, agc_cfg, sizeof(agc_cfg)); + mt352_write(fe, input_freq_cfg, sizeof(input_freq_cfg)); + mt352_write(fe, rs_err_cfg, sizeof(rs_err_cfg)); + mt352_write(fe, capt_range_cfg, sizeof(capt_range_cfg)); + mt352_write(fe, trl_nom_cfg, sizeof(trl_nom_cfg)); + mt352_write(fe, tps_given_cfg, sizeof(tps_given_cfg)); + mt352_write(fe, tuner_go, sizeof(tuner_go)); + return 0; +} + +static struct mt352_config terratec_xs_mt352_cfg = { + .demod_address = (0x1e >> 1), + .no_tuner = 1, + .if2 = 45600, + .demod_init = mt352_terratec_xs_init, +}; + /* ------------------------------------------------------------------ */ static int attach_xc3028(u8 addr, struct em28xx *dev) @@ -458,13 +495,11 @@ static int dvb_init(struct em28xx *dev) if (dvb->frontend == NULL) { /* This board could have either a zl10353 or a mt352. If the chip id isn't for zl10353, try mt352 */ - - /* FIXME: make support for mt352 work */ - printk(KERN_ERR "version of this board with mt352 not " - "currently supported\n"); - result = -EINVAL; - goto out_free; + dvb->frontend = dvb_attach(mt352_attach, + &terratec_xs_mt352_cfg, + &dev->i2c_adap); } + if (attach_xc3028(0x61, dev) < 0) { result = -EINVAL; goto out_free; -- cgit v1.2.3 From ff69786b4ccd0d5b99a60ba0be98237f9b7d8f52 Mon Sep 17 00:00:00 2001 From: Devin Heitmueller Date: Sun, 12 Jul 2009 18:44:19 -0300 Subject: V4L/DVB (12258): em28xx: fix typo in mt352 init sequence for Terratec Cinergy T XS USB Andy walls pointed out that we were passing 0x5d to the TUNER_GO register, instead of 0x01. Set the register properly (note the code did still work with the incorrect value, so this does not address a regression). Thanks to Andy Walls for noticing the issue. Cc: Andy Walls Signed-off-by: Devin Heitmueller Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/em28xx/em28xx-dvb.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/media/video/em28xx/em28xx-dvb.c b/drivers/media/video/em28xx/em28xx-dvb.c index d57f7583ac6..f3f0e8fe73c 100644 --- a/drivers/media/video/em28xx/em28xx-dvb.c +++ b/drivers/media/video/em28xx/em28xx-dvb.c @@ -272,7 +272,7 @@ static int mt352_terratec_xs_init(struct dvb_frontend *fe) static u8 capt_range_cfg[] = { CAPT_RANGE, 0x32 }; static u8 trl_nom_cfg[] = { TRL_NOMINAL_RATE_1, 0x64, 0x00 }; static u8 tps_given_cfg[] = { TPS_GIVEN_1, 0x40, 0x80, 0x50 }; - static u8 tuner_go[] = { TUNER_GO, 0x5d}; + static u8 tuner_go[] = { TUNER_GO, 0x01}; mt352_write(fe, clock_config, sizeof(clock_config)); udelay(200); -- cgit v1.2.3 From d5b3ba9cb375620a109d79f2e3a7bc21e9b75d8f Mon Sep 17 00:00:00 2001 From: Devin Heitmueller Date: Wed, 8 Jul 2009 21:51:35 -0300 Subject: V4L/DVB (12260): em28xx: make support work for the Pinnacle Hybrid Pro (eb1a:2881) Setup the GPIOs properly and enable support for the DVB side of the Pinnacle Hybrid Pro USB stick. Thanks to Andreas Lunderhage for testing patches and providing a remote debug environment. Cc: Andreas Lunderhage Signed-off-by: Devin Heitmueller Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/em28xx/em28xx-cards.c | 24 ++++++++++++++++++++---- drivers/media/video/em28xx/em28xx-dvb.c | 1 + 2 files changed, 21 insertions(+), 4 deletions(-) diff --git a/drivers/media/video/em28xx/em28xx-cards.c b/drivers/media/video/em28xx/em28xx-cards.c index 1bd789a52e6..ba20065c24b 100644 --- a/drivers/media/video/em28xx/em28xx-cards.c +++ b/drivers/media/video/em28xx/em28xx-cards.c @@ -157,6 +157,20 @@ static struct em28xx_reg_seq evga_indtube_digital[] = { { -1, -1, -1, -1}, }; +/* Pinnacle Hybrid Pro eb1a:2881 */ +static struct em28xx_reg_seq pinnacle_hybrid_pro_analog[] = { + {EM28XX_R08_GPIO, 0x6f, ~EM_GPIO_4, 10}, + { -1, -1, -1, -1}, +}; + +static struct em28xx_reg_seq pinnacle_hybrid_pro_digital[] = { + {EM28XX_R08_GPIO, 0x6e, ~EM_GPIO_4, 10}, + {EM2880_R04_GPO, 0x04, 0xff, 100},/* zl10353 reset */ + {EM2880_R04_GPO, 0x0c, 0xff, 1}, + { -1, -1, -1, -1}, +}; + + /* Callback for the most boards */ static struct em28xx_reg_seq default_tuner_gpio[] = { {EM28XX_R08_GPIO, EM_GPIO_4, EM_GPIO_4, 10}, @@ -1253,25 +1267,26 @@ struct em28xx_board em28xx_boards[] = { }, [EM2881_BOARD_PINNACLE_HYBRID_PRO] = { .name = "Pinnacle Hybrid Pro", - .valid = EM28XX_BOARD_NOT_VALIDATED, .tuner_type = TUNER_XC2028, .tuner_gpio = default_tuner_gpio, .decoder = EM28XX_TVP5150, + .has_dvb = 1, + .dvb_gpio = pinnacle_hybrid_pro_digital, .input = { { .type = EM28XX_VMUX_TELEVISION, .vmux = TVP5150_COMPOSITE0, .amux = EM28XX_AMUX_VIDEO, - .gpio = default_analog, + .gpio = pinnacle_hybrid_pro_analog, }, { .type = EM28XX_VMUX_COMPOSITE1, .vmux = TVP5150_COMPOSITE1, .amux = EM28XX_AMUX_LINE_IN, - .gpio = default_analog, + .gpio = pinnacle_hybrid_pro_analog, }, { .type = EM28XX_VMUX_SVIDEO, .vmux = TVP5150_SVIDEO, .amux = EM28XX_AMUX_LINE_IN, - .gpio = default_analog, + .gpio = pinnacle_hybrid_pro_analog, } }, }, [EM2882_BOARD_PINNACLE_HYBRID_PRO] = { @@ -1641,6 +1656,7 @@ static struct em28xx_hash_table em28xx_eeprom_hash[] = { {0x966a0441, EM2880_BOARD_KWORLD_DVB_310U, TUNER_XC2028}, {0x9567eb1a, EM2880_BOARD_EMPIRE_DUAL_TV, TUNER_XC2028}, {0xcee44a99, EM2882_BOARD_EVGA_INDTUBE, TUNER_XC2028}, + {0xb8846b20, EM2881_BOARD_PINNACLE_HYBRID_PRO, TUNER_XC2028}, }; /* I2C devicelist hash table for devices with generic USB IDs */ diff --git a/drivers/media/video/em28xx/em28xx-dvb.c b/drivers/media/video/em28xx/em28xx-dvb.c index f3f0e8fe73c..5ebc274c1b2 100644 --- a/drivers/media/video/em28xx/em28xx-dvb.c +++ b/drivers/media/video/em28xx/em28xx-dvb.c @@ -489,6 +489,7 @@ static int dvb_init(struct em28xx *dev) } break; case EM2880_BOARD_TERRATEC_HYBRID_XS: + case EM2881_BOARD_PINNACLE_HYBRID_PRO: dvb->frontend = dvb_attach(zl10353_attach, &em28xx_terratec_xs_zl10353_xc3028, &dev->i2c_adap); -- cgit v1.2.3 From 44010440ca2693a07b1252ee836a23804412575e Mon Sep 17 00:00:00 2001 From: Devin Heitmueller Date: Wed, 8 Jul 2009 22:18:15 -0300 Subject: V4L/DVB (12261): em28xx: set GPIO properly for Pinnacle Hybrid Pro analog support Set the GPIO properly for the analog side of the Pinnacle Hybrid Pro, or else the emp202 doesn't get detected properly. Signed-off-by: Devin Heitmueller Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/em28xx/em28xx-cards.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/media/video/em28xx/em28xx-cards.c b/drivers/media/video/em28xx/em28xx-cards.c index ba20065c24b..476acb02a3d 100644 --- a/drivers/media/video/em28xx/em28xx-cards.c +++ b/drivers/media/video/em28xx/em28xx-cards.c @@ -159,7 +159,7 @@ static struct em28xx_reg_seq evga_indtube_digital[] = { /* Pinnacle Hybrid Pro eb1a:2881 */ static struct em28xx_reg_seq pinnacle_hybrid_pro_analog[] = { - {EM28XX_R08_GPIO, 0x6f, ~EM_GPIO_4, 10}, + {EM28XX_R08_GPIO, 0xfd, ~EM_GPIO_4, 10}, { -1, -1, -1, -1}, }; -- cgit v1.2.3 From 5343e446014b93f740d5502f9f3bfa3f66dcbc7c Mon Sep 17 00:00:00 2001 From: Devin Heitmueller Date: Wed, 15 Jul 2009 00:35:47 -0300 Subject: V4L/DVB (12262): em28xx: Make sure the tuner is initialized if generic empia USB id was used In cases where the device has a generic Empia USB ID, the call in the precard setup phase did not set the tuner GPIO. As a result, the tuner may not be taken out of reset before attempting initialization in the analog driver. This problem was not seen before with the EVGA inDtube, since that particular board has the analog GPIO setup to include taking the tuner out of reset. Thanks to Andreas Lunderhage for testing patches and providing a remote debug environment for the Pinnacle 320e. Cc: Andreas Lunderhage Signed-off-by: Devin Heitmueller Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/em28xx/em28xx-cards.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/media/video/em28xx/em28xx-cards.c b/drivers/media/video/em28xx/em28xx-cards.c index 476acb02a3d..5aef7ddd091 100644 --- a/drivers/media/video/em28xx/em28xx-cards.c +++ b/drivers/media/video/em28xx/em28xx-cards.c @@ -2286,6 +2286,7 @@ void em28xx_card_setup(struct em28xx *dev) em28xx_set_mode() in em28xx_pre_card_setup() was a no-op, so make the call now so the analog GPIOs are set properly before probing the i2c bus. */ + em28xx_gpio_set(dev, dev->board.tuner_gpio); em28xx_set_mode(dev, EM28XX_ANALOG_MODE); break; case EM2820_BOARD_SILVERCREST_WEBCAM: -- cgit v1.2.3 From e16e5a3739cfd208de00d49def10fcfa6ceff46f Mon Sep 17 00:00:00 2001 From: Devin Heitmueller Date: Wed, 15 Jul 2009 00:37:22 -0300 Subject: V4L/DVB (12263): em28xx: set demod profile for Pinnacle Hybrid Pro 320e The Pinnacle Hybrid Pro 320e was missing a demod config for the xc3028, which is required for digital tuning to work properly. Add the missing profile. Thanks to Andreas Lunderhage for testing patches and providing a remote debug environment. Cc: Andreas Lunderhage Signed-off-by: Devin Heitmueller Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/em28xx/em28xx-cards.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/media/video/em28xx/em28xx-cards.c b/drivers/media/video/em28xx/em28xx-cards.c index 5aef7ddd091..320f1f60276 100644 --- a/drivers/media/video/em28xx/em28xx-cards.c +++ b/drivers/media/video/em28xx/em28xx-cards.c @@ -1990,6 +1990,7 @@ static void em28xx_setup_xc3028(struct em28xx *dev, struct xc2028_ctrl *ctl) ctl->demod = XC3028_FE_ZARLINK456; break; case EM2880_BOARD_TERRATEC_HYBRID_XS: + case EM2881_BOARD_PINNACLE_HYBRID_PRO: ctl->demod = XC3028_FE_ZARLINK456; break; case EM2880_BOARD_HAUPPAUGE_WINTV_HVR_900_R2: -- cgit v1.2.3 From a84f79aed688a94197387830df3a2f2068f49dc0 Mon Sep 17 00:00:00 2001 From: Devin Heitmueller Date: Sun, 12 Jul 2009 17:05:02 -0300 Subject: V4L/DVB (12265): em28xx: fix tuning problem in HVR-900 (R1) When the change was introduced in the zl10353 for the i2c gate behavior, this broke the HVR-900 which was not behind a gate. Use a version of the zl10353 config profile that indicates the tuner is not behind such a gate. Without this patch the first tune succeeds, but subsequent tuning attempts will fail. The change also renames the terratec zl10353 profile I wrote to be more generic, since it is shared by the non-terratec device. Thanks to Michael Krufky for providing a HVR-900 and DVB-T environment to test with. Cc: Michael Krufky Signed-off-by: Devin Heitmueller Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/em28xx/em28xx-dvb.c | 14 +++++++++++--- 1 file changed, 11 insertions(+), 3 deletions(-) diff --git a/drivers/media/video/em28xx/em28xx-dvb.c b/drivers/media/video/em28xx/em28xx-dvb.c index 5ebc274c1b2..cf0ac7f2a30 100644 --- a/drivers/media/video/em28xx/em28xx-dvb.c +++ b/drivers/media/video/em28xx/em28xx-dvb.c @@ -245,7 +245,7 @@ static struct s5h1409_config em28xx_s5h1409_with_xc3028 = { .mpeg_timing = S5H1409_MPEGTIMING_CONTINOUS_NONINVERTING_CLOCK }; -static struct zl10353_config em28xx_terratec_xs_zl10353_xc3028 = { +static struct zl10353_config em28xx_zl10353_xc3028_no_i2c_gate = { .demod_address = (0x1e >> 1), .no_tuner = 1, .disable_i2c_gate_ctrl = 1, @@ -477,7 +477,6 @@ static int dvb_init(struct em28xx *dev) goto out_free; } break; - case EM2880_BOARD_HAUPPAUGE_WINTV_HVR_900: case EM2880_BOARD_KWORLD_DVB_310U: case EM2880_BOARD_EMPIRE_DUAL_TV: dvb->frontend = dvb_attach(zl10353_attach, @@ -488,10 +487,19 @@ static int dvb_init(struct em28xx *dev) goto out_free; } break; + case EM2880_BOARD_HAUPPAUGE_WINTV_HVR_900: + dvb->frontend = dvb_attach(zl10353_attach, + &em28xx_zl10353_xc3028_no_i2c_gate, + &dev->i2c_adap); + if (attach_xc3028(0x61, dev) < 0) { + result = -EINVAL; + goto out_free; + } + break; case EM2880_BOARD_TERRATEC_HYBRID_XS: case EM2881_BOARD_PINNACLE_HYBRID_PRO: dvb->frontend = dvb_attach(zl10353_attach, - &em28xx_terratec_xs_zl10353_xc3028, + &em28xx_zl10353_xc3028_no_i2c_gate, &dev->i2c_adap); if (dvb->frontend == NULL) { /* This board could have either a zl10353 or a mt352. -- cgit v1.2.3 From 27954930f047df73a16253db2750345034e56c40 Mon Sep 17 00:00:00 2001 From: Jean-Francois Moine Date: Wed, 8 Jul 2009 05:21:50 -0300 Subject: V4L/DVB (12267): gspca - sonixj: Bad sensor init of non ov76xx sensors. The bug was introduced when adding the light frequency control Signed-off-by: Jean-Francois Moine Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/gspca/sonixj.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/media/video/gspca/sonixj.c b/drivers/media/video/gspca/sonixj.c index 0d02f41fa7d..bad309b90cc 100644 --- a/drivers/media/video/gspca/sonixj.c +++ b/drivers/media/video/gspca/sonixj.c @@ -1634,6 +1634,8 @@ static void setfreq(struct gspca_dev *gspca_dev) { struct sd *sd = (struct sd *) gspca_dev; + if (gspca_dev->ctrl_dis & (1 << FREQ_IDX)) + return; if (sd->sensor == SENSOR_OV7660) { switch (sd->freq) { case 0: /* Banding filter disabled */ -- cgit v1.2.3 From a2f5a8117cb185fc347f35e369a6320e6aa9d82d Mon Sep 17 00:00:00 2001 From: Antti Palosaari Date: Fri, 10 Jul 2009 20:03:43 -0300 Subject: V4L/DVB (12269): af9013: auto-detect parameters in case of garbage given by app Request demodulator auto-detect transmission parameters in case of garbage parameters provided by application for compatibility. That's needed at least for MPlayer compatibility currently. Thanks to Jelle de Jong for reporting issue and providing SSH access to Devin for debugging. Thanks to Devin Heitmueller for hard debug work he did to find that bug. Cc: Devin Heitmueller Cc: Jelle de Jong Signed-off-by: Antti Palosaari Signed-off-by: Mauro Carvalho Chehab --- drivers/media/dvb/frontends/af9013.c | 25 ++++++++++++++++++------- 1 file changed, 18 insertions(+), 7 deletions(-) diff --git a/drivers/media/dvb/frontends/af9013.c b/drivers/media/dvb/frontends/af9013.c index 136c5863d81..12e018b4107 100644 --- a/drivers/media/dvb/frontends/af9013.c +++ b/drivers/media/dvb/frontends/af9013.c @@ -527,6 +527,10 @@ static int af9013_set_ofdm_params(struct af9013_state *state, u8 i, buf[3] = {0, 0, 0}; *auto_mode = 0; /* set if parameters are requested to auto set */ + /* Try auto-detect transmission parameters in case of AUTO requested or + garbage parameters given by application for compatibility. + MPlayer seems to provide garbage parameters currently. */ + switch (params->transmission_mode) { case TRANSMISSION_MODE_AUTO: *auto_mode = 1; @@ -536,7 +540,8 @@ static int af9013_set_ofdm_params(struct af9013_state *state, buf[0] |= (1 << 0); break; default: - return -EINVAL; + deb_info("%s: invalid transmission_mode\n", __func__); + *auto_mode = 1; } switch (params->guard_interval) { @@ -554,7 +559,8 @@ static int af9013_set_ofdm_params(struct af9013_state *state, buf[0] |= (3 << 2); break; default: - return -EINVAL; + deb_info("%s: invalid guard_interval\n", __func__); + *auto_mode = 1; } switch (params->hierarchy_information) { @@ -572,7 +578,8 @@ static int af9013_set_ofdm_params(struct af9013_state *state, buf[0] |= (3 << 4); break; default: - return -EINVAL; + deb_info("%s: invalid hierarchy_information\n", __func__); + *auto_mode = 1; }; switch (params->constellation) { @@ -587,7 +594,8 @@ static int af9013_set_ofdm_params(struct af9013_state *state, buf[1] |= (2 << 6); break; default: - return -EINVAL; + deb_info("%s: invalid constellation\n", __func__); + *auto_mode = 1; } /* Use HP. How and which case we can switch to LP? */ @@ -611,7 +619,8 @@ static int af9013_set_ofdm_params(struct af9013_state *state, buf[2] |= (4 << 0); break; default: - return -EINVAL; + deb_info("%s: invalid code_rate_HP\n", __func__); + *auto_mode = 1; } switch (params->code_rate_LP) { @@ -638,7 +647,8 @@ static int af9013_set_ofdm_params(struct af9013_state *state, if (params->hierarchy_information == HIERARCHY_AUTO) break; default: - return -EINVAL; + deb_info("%s: invalid code_rate_LP\n", __func__); + *auto_mode = 1; } switch (params->bandwidth) { @@ -651,7 +661,8 @@ static int af9013_set_ofdm_params(struct af9013_state *state, buf[1] |= (2 << 2); break; default: - return -EINVAL; + deb_info("%s: invalid bandwidth\n", __func__); + buf[1] |= (2 << 2); /* cannot auto-detect BW, try 8 MHz */ } /* program */ -- cgit v1.2.3 From af1d9afa75082663ea9e2b67b9381d1af403f52b Mon Sep 17 00:00:00 2001 From: Brian Johnson Date: Sun, 19 Jul 2009 05:29:20 -0300 Subject: V4L/DVB (12282): gspca - main: Support for vidioc_g_chip_ident and vidioc_g/s_register. Signed-off-by: Brian Johnson Signed-off-by: Jean-Francois Moine Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/gspca/gspca.c | 73 +++++++++++++++++++++++++++++++++++++++ drivers/media/video/gspca/gspca.h | 9 +++++ 2 files changed, 82 insertions(+) diff --git a/drivers/media/video/gspca/gspca.c b/drivers/media/video/gspca/gspca.c index 1e89600986c..b8561dfb6c8 100644 --- a/drivers/media/video/gspca/gspca.c +++ b/drivers/media/video/gspca/gspca.c @@ -727,6 +727,74 @@ static int gspca_get_mode(struct gspca_dev *gspca_dev, return -EINVAL; } +#ifdef CONFIG_VIDEO_ADV_DEBUG +static int vidioc_g_register(struct file *file, void *priv, + struct v4l2_dbg_register *reg) +{ + int ret; + struct gspca_dev *gspca_dev = priv; + + if (!gspca_dev->sd_desc->get_chip_ident) + return -EINVAL; + + if (!gspca_dev->sd_desc->get_register) + return -EINVAL; + + if (mutex_lock_interruptible(&gspca_dev->usb_lock)) + return -ERESTARTSYS; + if (gspca_dev->present) + ret = gspca_dev->sd_desc->get_register(gspca_dev, reg); + else + ret = -ENODEV; + mutex_unlock(&gspca_dev->usb_lock); + + return ret; +} + +static int vidioc_s_register(struct file *file, void *priv, + struct v4l2_dbg_register *reg) +{ + int ret; + struct gspca_dev *gspca_dev = priv; + + if (!gspca_dev->sd_desc->get_chip_ident) + return -EINVAL; + + if (!gspca_dev->sd_desc->set_register) + return -EINVAL; + + if (mutex_lock_interruptible(&gspca_dev->usb_lock)) + return -ERESTARTSYS; + if (gspca_dev->present) + ret = gspca_dev->sd_desc->set_register(gspca_dev, reg); + else + ret = -ENODEV; + mutex_unlock(&gspca_dev->usb_lock); + + return ret; +} +#endif + +static int vidioc_g_chip_ident(struct file *file, void *priv, + struct v4l2_dbg_chip_ident *chip) +{ + int ret; + struct gspca_dev *gspca_dev = priv; + + if (!gspca_dev->sd_desc->get_chip_ident) + return -EINVAL; + + if (mutex_lock_interruptible(&gspca_dev->usb_lock)) + return -ERESTARTSYS; + if (gspca_dev->present) + ret = gspca_dev->sd_desc->get_chip_ident(gspca_dev, chip); + else + ret = -ENODEV; + mutex_unlock(&gspca_dev->usb_lock); + + return ret; +} + static int vidioc_enum_fmt_vid_cap(struct file *file, void *priv, struct v4l2_fmtdesc *fmtdesc) { @@ -1883,6 +1951,11 @@ static const struct v4l2_ioctl_ops dev_ioctl_ops = { .vidioc_s_parm = vidioc_s_parm, .vidioc_s_std = vidioc_s_std, .vidioc_enum_framesizes = vidioc_enum_framesizes, +#ifdef CONFIG_VIDEO_ADV_DEBUG + .vidioc_g_register = vidioc_g_register, + .vidioc_s_register = vidioc_s_register, +#endif + .vidioc_g_chip_ident = vidioc_g_chip_ident, #ifdef CONFIG_VIDEO_V4L1_COMPAT .vidiocgmbuf = vidiocgmbuf, #endif diff --git a/drivers/media/video/gspca/gspca.h b/drivers/media/video/gspca/gspca.h index bd1faff8864..46c4effdfcd 100644 --- a/drivers/media/video/gspca/gspca.h +++ b/drivers/media/video/gspca/gspca.h @@ -69,6 +69,10 @@ typedef void (*cam_v_op) (struct gspca_dev *); typedef int (*cam_cf_op) (struct gspca_dev *, const struct usb_device_id *); typedef int (*cam_jpg_op) (struct gspca_dev *, struct v4l2_jpegcompression *); +typedef int (*cam_reg_op) (struct gspca_dev *, + struct v4l2_dbg_register *); +typedef int (*cam_ident_op) (struct gspca_dev *, + struct v4l2_dbg_chip_ident *); typedef int (*cam_streamparm_op) (struct gspca_dev *, struct v4l2_streamparm *); typedef int (*cam_qmnu_op) (struct gspca_dev *, @@ -105,6 +109,11 @@ struct sd_desc { cam_qmnu_op querymenu; cam_streamparm_op get_streamparm; cam_streamparm_op set_streamparm; +#ifdef CONFIG_VIDEO_ADV_DEBUG + cam_reg_op set_register; + cam_reg_op get_register; +#endif + cam_ident_op get_chip_ident; }; /* packet types when moving from iso buf to frame buf */ -- cgit v1.2.3 From 26e744b6b61066203fd57de0d3962353621e06f8 Mon Sep 17 00:00:00 2001 From: Brian Johnson Date: Sun, 19 Jul 2009 05:52:58 -0300 Subject: V4L/DVB (12283): gspca - sn9c20x: New subdriver for sn9c201 and sn9c202 bridges. Signed-off-by: Brian Johnson Signed-off-by: Jean-Francois Moine Signed-off-by: Mauro Carvalho Chehab --- Documentation/video4linux/gspca.txt | 32 + drivers/media/video/gspca/Kconfig | 16 + drivers/media/video/gspca/Makefile | 2 + drivers/media/video/gspca/sn9c20x.c | 2433 +++++++++++++++++++++++++++++++++++ include/linux/videodev2.h | 1 + include/media/v4l2-chip-ident.h | 12 + 6 files changed, 2496 insertions(+) create mode 100644 drivers/media/video/gspca/sn9c20x.c diff --git a/Documentation/video4linux/gspca.txt b/Documentation/video4linux/gspca.txt index 2bcf78896e2..573f95b5880 100644 --- a/Documentation/video4linux/gspca.txt +++ b/Documentation/video4linux/gspca.txt @@ -44,7 +44,9 @@ zc3xx 0458:7007 Genius VideoCam V2 zc3xx 0458:700c Genius VideoCam V3 zc3xx 0458:700f Genius VideoCam Web V2 sonixj 0458:7025 Genius Eye 311Q +sn9c20x 0458:7029 Genius Look 320s sonixj 0458:702e Genius Slim 310 NB +sn9c20x 045e:00f4 LifeCam VX-6000 (SN9C20x + OV9650) sonixj 045e:00f5 MicroSoft VX3000 sonixj 045e:00f7 MicroSoft VX1000 ov519 045e:028c Micro$oft xbox cam @@ -282,6 +284,28 @@ sonixj 0c45:613a Microdia Sonix PC Camera sonixj 0c45:613b Surfer SN-206 sonixj 0c45:613c Sonix Pccam168 sonixj 0c45:6143 Sonix Pccam168 +sn9c20x 0c45:6240 PC Camera (SN9C201 + MT9M001) +sn9c20x 0c45:6242 PC Camera (SN9C201 + MT9M111) +sn9c20x 0c45:6248 PC Camera (SN9C201 + OV9655) +sn9c20x 0c45:624e PC Camera (SN9C201 + SOI968) +sn9c20x 0c45:624f PC Camera (SN9C201 + OV9650) +sn9c20x 0c45:6251 PC Camera (SN9C201 + OV9650) +sn9c20x 0c45:6253 PC Camera (SN9C201 + OV9650) +sn9c20x 0c45:6260 PC Camera (SN9C201 + OV7670) +sn9c20x 0c45:6270 PC Camera (SN9C201 + MT9V011/MT9V111/MT9V112) +sn9c20x 0c45:627b PC Camera (SN9C201 + OV7660) +sn9c20x 0c45:627c PC Camera (SN9C201 + HV7131R) +sn9c20x 0c45:627f PC Camera (SN9C201 + OV9650) +sn9c20x 0c45:6280 PC Camera (SN9C202 + MT9M001) +sn9c20x 0c45:6282 PC Camera (SN9C202 + MT9M111) +sn9c20x 0c45:6288 PC Camera (SN9C202 + OV9655) +sn9c20x 0c45:628e PC Camera (SN9C202 + SOI968) +sn9c20x 0c45:628f PC Camera (SN9C202 + OV9650) +sn9c20x 0c45:62a0 PC Camera (SN9C202 + OV7670) +sn9c20x 0c45:62b0 PC Camera (SN9C202 + MT9V011/MT9V111/MT9V112) +sn9c20x 0c45:62b3 PC Camera (SN9C202 + OV9655) +sn9c20x 0c45:62bb PC Camera (SN9C202 + OV7660) +sn9c20x 0c45:62bc PC Camera (SN9C202 + HV7131R) sunplus 0d64:0303 Sunplus FashionCam DXG etoms 102c:6151 Qcam Sangha CIF etoms 102c:6251 Qcam xxxxxx VGA @@ -290,6 +314,7 @@ spca561 10fd:7e50 FlyCam Usb 100 zc3xx 10fd:8050 Typhoon Webshot II USB 300k ov534 1415:2000 Sony HD Eye for PS3 (SLEH 00201) pac207 145f:013a Trust WB-1300N +sn9c20x 145f:013d Trust WB-3600R vc032x 15b8:6001 HP 2.0 Megapixel vc032x 15b8:6002 HP 2.0 Megapixel rz406aa spca501 1776:501c Arowana 300K CMOS Camera @@ -300,4 +325,11 @@ spca500 2899:012c Toptro Industrial spca508 8086:0110 Intel Easy PC Camera spca500 8086:0630 Intel Pocket PC Camera spca506 99fa:8988 Grandtec V.cap +sn9c20x a168:0610 Dino-Lite Digital Microscope (SN9C201 + HV7131R) +sn9c20x a168:0611 Dino-Lite Digital Microscope (SN9C201 + HV7131R) +sn9c20x a168:0613 Dino-Lite Digital Microscope (SN9C201 + HV7131R) +sn9c20x a168:0618 Dino-Lite Digital Microscope (SN9C201 + HV7131R) +sn9c20x a168:0614 Dino-Lite Digital Microscope (SN9C201 + MT9M111) +sn9c20x a168:0615 Dino-Lite Digital Microscope (SN9C201 + MT9M111) +sn9c20x a168:0617 Dino-Lite Digital Microscope (SN9C201 + MT9M111) spca561 abcd:cdee Petcam diff --git a/drivers/media/video/gspca/Kconfig b/drivers/media/video/gspca/Kconfig index 578dc4ffc96..34f46f2bc04 100644 --- a/drivers/media/video/gspca/Kconfig +++ b/drivers/media/video/gspca/Kconfig @@ -102,6 +102,22 @@ config USB_GSPCA_PAC7311 To compile this driver as a module, choose M here: the module will be called gspca_pac7311. +config USB_GSPCA_SN9C20X + tristate "SN9C20X USB Camera Driver" + depends on VIDEO_V4L2 && USB_GSPCA + help + Say Y here if you want support for cameras based on the + sn9c20x chips (SN9C201 and SN9C202). + + To compile this driver as a module, choose M here: the + module will be called gspca_sn9c20x. + +config USB_GSPCA_SN9C20X_EVDEV + bool "Enable evdev support" + depends on USB_GSPCA_SN9C20X + ---help--- + Say Y here in order to enable evdev support for sn9c20x webcam button. + config USB_GSPCA_SONIXB tristate "SONIX Bayer USB Camera Driver" depends on VIDEO_V4L2 && USB_GSPCA diff --git a/drivers/media/video/gspca/Makefile b/drivers/media/video/gspca/Makefile index 8a6643e8eb9..f6d3b86e9ad 100644 --- a/drivers/media/video/gspca/Makefile +++ b/drivers/media/video/gspca/Makefile @@ -8,6 +8,7 @@ obj-$(CONFIG_USB_GSPCA_OV519) += gspca_ov519.o obj-$(CONFIG_USB_GSPCA_OV534) += gspca_ov534.o obj-$(CONFIG_USB_GSPCA_PAC207) += gspca_pac207.o obj-$(CONFIG_USB_GSPCA_PAC7311) += gspca_pac7311.o +obj-$(CONFIG_USB_GSPCA_SN9C20X) += gspca_sn9c20x.o obj-$(CONFIG_USB_GSPCA_SONIXB) += gspca_sonixb.o obj-$(CONFIG_USB_GSPCA_SONIXJ) += gspca_sonixj.o obj-$(CONFIG_USB_GSPCA_SPCA500) += gspca_spca500.o @@ -35,6 +36,7 @@ gspca_ov519-objs := ov519.o gspca_ov534-objs := ov534.o gspca_pac207-objs := pac207.o gspca_pac7311-objs := pac7311.o +gspca_sn9c20x-objs := sn9c20x.o gspca_sonixb-objs := sonixb.o gspca_sonixj-objs := sonixj.o gspca_spca500-objs := spca500.o diff --git a/drivers/media/video/gspca/sn9c20x.c b/drivers/media/video/gspca/sn9c20x.c new file mode 100644 index 00000000000..78ab26ceb90 --- /dev/null +++ b/drivers/media/video/gspca/sn9c20x.c @@ -0,0 +1,2433 @@ +/* + * Sonix sn9c201 sn9c202 library + * Copyright (C) 2008-2009 microdia project + * Copyright (C) 2009 Brian Johnson + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#include "gspca.h" +#include "jpeg.h" + +#include +#ifdef CONFIG_USB_GSPCA_SN9C20X_EVDEV +#include +#include +#include +#include +#endif + +MODULE_AUTHOR("Brian Johnson , " + "microdia project "); +MODULE_DESCRIPTION("GSPCA/SN9C20X USB Camera Driver"); +MODULE_LICENSE("GPL"); + +#define MODULE_NAME "sn9c20x" + +#define MODE_RAW 0x10 +#define MODE_JPEG 0x20 +#define MODE_SXGA 0x80 + +#define SENSOR_OV9650 0 +#define SENSOR_OV9655 1 +#define SENSOR_SOI968 2 +#define SENSOR_OV7660 3 +#define SENSOR_OV7670 4 +#define SENSOR_MT9V011 5 +#define SENSOR_MT9V111 6 +#define SENSOR_MT9V112 7 +#define SENSOR_MT9M001 8 +#define SENSOR_MT9M111 9 +#define SENSOR_HV7131R 10 +#define SENSOR_MT9VPRB 20 + +/* specific webcam descriptor */ +struct sd { + struct gspca_dev gspca_dev; + +#define MIN_AVG_LUM 80 +#define MAX_AVG_LUM 130 + atomic_t avg_lum; + u8 old_step; + u8 older_step; + u8 exposure_step; + + u8 brightness; + u8 contrast; + u8 saturation; + s16 hue; + u8 gamma; + u8 red; + u8 blue; + + u8 hflip; + u8 vflip; + u8 gain; + u16 exposure; + u8 auto_exposure; + + u8 i2c_addr; + u8 sensor; + u8 hstart; + u8 vstart; + + u8 *jpeg_hdr; + u8 quality; + +#ifdef CONFIG_USB_GSPCA_SN9C20X_EVDEV + struct input_dev *input_dev; + u8 input_gpio; + struct task_struct *input_task; +#endif +}; + +static int sd_setbrightness(struct gspca_dev *gspca_dev, s32 val); +static int sd_getbrightness(struct gspca_dev *gspca_dev, s32 *val); +static int sd_setcontrast(struct gspca_dev *gspca_dev, s32 val); +static int sd_getcontrast(struct gspca_dev *gspca_dev, s32 *val); +static int sd_setsaturation(struct gspca_dev *gspca_dev, s32 val); +static int sd_getsaturation(struct gspca_dev *gspca_dev, s32 *val); +static int sd_sethue(struct gspca_dev *gspca_dev, s32 val); +static int sd_gethue(struct gspca_dev *gspca_dev, s32 *val); +static int sd_setgamma(struct gspca_dev *gspca_dev, s32 val); +static int sd_getgamma(struct gspca_dev *gspca_dev, s32 *val); +static int sd_setredbalance(struct gspca_dev *gspca_dev, s32 val); +static int sd_getredbalance(struct gspca_dev *gspca_dev, s32 *val); +static int sd_setbluebalance(struct gspca_dev *gspca_dev, s32 val); +static int sd_getbluebalance(struct gspca_dev *gspca_dev, s32 *val); +static int sd_setvflip(struct gspca_dev *gspca_dev, s32 val); +static int sd_getvflip(struct gspca_dev *gspca_dev, s32 *val); +static int sd_sethflip(struct gspca_dev *gspca_dev, s32 val); +static int sd_gethflip(struct gspca_dev *gspca_dev, s32 *val); +static int sd_setgain(struct gspca_dev *gspca_dev, s32 val); +static int sd_getgain(struct gspca_dev *gspca_dev, s32 *val); +static int sd_setexposure(struct gspca_dev *gspca_dev, s32 val); +static int sd_getexposure(struct gspca_dev *gspca_dev, s32 *val); +static int sd_setautoexposure(struct gspca_dev *gspca_dev, s32 val); +static int sd_getautoexposure(struct gspca_dev *gspca_dev, s32 *val); + +static struct ctrl sd_ctrls[] = { + { +#define BRIGHTNESS_IDX 0 + { + .id = V4L2_CID_BRIGHTNESS, + .type = V4L2_CTRL_TYPE_INTEGER, + .name = "Brightness", + .minimum = 0, + .maximum = 0xff, + .step = 1, +#define BRIGHTNESS_DEFAULT 0x7f + .default_value = BRIGHTNESS_DEFAULT, + }, + .set = sd_setbrightness, + .get = sd_getbrightness, + }, + { +#define CONTRAST_IDX 1 + { + .id = V4L2_CID_CONTRAST, + .type = V4L2_CTRL_TYPE_INTEGER, + .name = "Contrast", + .minimum = 0, + .maximum = 0xff, + .step = 1, +#define CONTRAST_DEFAULT 0x7f + .default_value = CONTRAST_DEFAULT, + }, + .set = sd_setcontrast, + .get = sd_getcontrast, + }, + { +#define SATURATION_IDX 2 + { + .id = V4L2_CID_SATURATION, + .type = V4L2_CTRL_TYPE_INTEGER, + .name = "Saturation", + .minimum = 0, + .maximum = 0xff, + .step = 1, +#define SATURATION_DEFAULT 0x7f + .default_value = SATURATION_DEFAULT, + }, + .set = sd_setsaturation, + .get = sd_getsaturation, + }, + { +#define HUE_IDX 3 + { + .id = V4L2_CID_HUE, + .type = V4L2_CTRL_TYPE_INTEGER, + .name = "Hue", + .minimum = -180, + .maximum = 180, + .step = 1, +#define HUE_DEFAULT 0 + .default_value = HUE_DEFAULT, + }, + .set = sd_sethue, + .get = sd_gethue, + }, + { +#define GAMMA_IDX 4 + { + .id = V4L2_CID_GAMMA, + .type = V4L2_CTRL_TYPE_INTEGER, + .name = "Gamma", + .minimum = 0, + .maximum = 0xff, + .step = 1, +#define GAMMA_DEFAULT 0x10 + .default_value = GAMMA_DEFAULT, + }, + .set = sd_setgamma, + .get = sd_getgamma, + }, + { +#define BLUE_IDX 5 + { + .id = V4L2_CID_BLUE_BALANCE, + .type = V4L2_CTRL_TYPE_INTEGER, + .name = "Blue Balance", + .minimum = 0, + .maximum = 0x7f, + .step = 1, +#define BLUE_DEFAULT 0x28 + .default_value = BLUE_DEFAULT, + }, + .set = sd_setbluebalance, + .get = sd_getbluebalance, + }, + { +#define RED_IDX 6 + { + .id = V4L2_CID_RED_BALANCE, + .type = V4L2_CTRL_TYPE_INTEGER, + .name = "Red Balance", + .minimum = 0, + .maximum = 0x7f, + .step = 1, +#define RED_DEFAULT 0x28 + .default_value = RED_DEFAULT, + }, + .set = sd_setredbalance, + .get = sd_getredbalance, + }, + { +#define HFLIP_IDX 7 + { + .id = V4L2_CID_HFLIP, + .type = V4L2_CTRL_TYPE_BOOLEAN, + .name = "Horizontal Flip", + .minimum = 0, + .maximum = 1, + .step = 1, +#define HFLIP_DEFAULT 0 + .default_value = HFLIP_DEFAULT, + }, + .set = sd_sethflip, + .get = sd_gethflip, + }, + { +#define VFLIP_IDX 8 + { + .id = V4L2_CID_VFLIP, + .type = V4L2_CTRL_TYPE_BOOLEAN, + .name = "Vertical Flip", + .minimum = 0, + .maximum = 1, + .step = 1, +#define VFLIP_DEFAULT 0 + .default_value = VFLIP_DEFAULT, + }, + .set = sd_setvflip, + .get = sd_getvflip, + }, + { +#define EXPOSURE_IDX 9 + { + .id = V4L2_CID_EXPOSURE, + .type = V4L2_CTRL_TYPE_INTEGER, + .name = "Exposure", + .minimum = 0, + .maximum = 0x1780, + .step = 1, +#define EXPOSURE_DEFAULT 0x33 + .default_value = EXPOSURE_DEFAULT, + }, + .set = sd_setexposure, + .get = sd_getexposure, + }, + { +#define GAIN_IDX 10 + { + .id = V4L2_CID_GAIN, + .type = V4L2_CTRL_TYPE_INTEGER, + .name = "Gain", + .minimum = 0, + .maximum = 28, + .step = 1, +#define GAIN_DEFAULT 0x00 + .default_value = GAIN_DEFAULT, + }, + .set = sd_setgain, + .get = sd_getgain, + }, + { +#define AUTOGAIN_IDX 11 + { + .id = V4L2_CID_AUTOGAIN, + .type = V4L2_CTRL_TYPE_BOOLEAN, + .name = "Auto Exposure", + .minimum = 0, + .maximum = 1, + .step = 1, +#define AUTO_EXPOSURE_DEFAULT 1 + .default_value = AUTO_EXPOSURE_DEFAULT, + }, + .set = sd_setautoexposure, + .get = sd_getautoexposure, + }, +}; + +static const struct v4l2_pix_format vga_mode[] = { + {160, 120, V4L2_PIX_FMT_JPEG, V4L2_FIELD_NONE, + .bytesperline = 240, + .sizeimage = 240 * 120, + .colorspace = V4L2_COLORSPACE_JPEG, + .priv = 0 | MODE_JPEG}, + {160, 120, V4L2_PIX_FMT_SBGGR8, V4L2_FIELD_NONE, + .bytesperline = 160, + .sizeimage = 160 * 120, + .colorspace = V4L2_COLORSPACE_SRGB, + .priv = 0 | MODE_RAW}, + {160, 120, V4L2_PIX_FMT_SN9C20X_I420, V4L2_FIELD_NONE, + .bytesperline = 240, + .sizeimage = 240 * 120, + .colorspace = V4L2_COLORSPACE_SRGB, + .priv = 0}, + {320, 240, V4L2_PIX_FMT_JPEG, V4L2_FIELD_NONE, + .bytesperline = 480, + .sizeimage = 480 * 240 , + .colorspace = V4L2_COLORSPACE_JPEG, + .priv = 1 | MODE_JPEG}, + {320, 240, V4L2_PIX_FMT_SBGGR8, V4L2_FIELD_NONE, + .bytesperline = 320, + .sizeimage = 320 * 240 , + .colorspace = V4L2_COLORSPACE_SRGB, + .priv = 1 | MODE_RAW}, + {320, 240, V4L2_PIX_FMT_SN9C20X_I420, V4L2_FIELD_NONE, + .bytesperline = 480, + .sizeimage = 480 * 240 , + .colorspace = V4L2_COLORSPACE_SRGB, + .priv = 1}, + {640, 480, V4L2_PIX_FMT_JPEG, V4L2_FIELD_NONE, + .bytesperline = 960, + .sizeimage = 960 * 480, + .colorspace = V4L2_COLORSPACE_JPEG, + .priv = 2 | MODE_JPEG}, + {640, 480, V4L2_PIX_FMT_SBGGR8, V4L2_FIELD_NONE, + .bytesperline = 640, + .sizeimage = 640 * 480, + .colorspace = V4L2_COLORSPACE_SRGB, + .priv = 2 | MODE_RAW}, + {640, 480, V4L2_PIX_FMT_SN9C20X_I420, V4L2_FIELD_NONE, + .bytesperline = 960, + .sizeimage = 960 * 480, + .colorspace = V4L2_COLORSPACE_SRGB, + .priv = 2}, +}; + +static const struct v4l2_pix_format sxga_mode[] = { + {160, 120, V4L2_PIX_FMT_JPEG, V4L2_FIELD_NONE, + .bytesperline = 240, + .sizeimage = 240 * 120, + .colorspace = V4L2_COLORSPACE_JPEG, + .priv = 0 | MODE_JPEG}, + {160, 120, V4L2_PIX_FMT_SBGGR8, V4L2_FIELD_NONE, + .bytesperline = 160, + .sizeimage = 160 * 120, + .colorspace = V4L2_COLORSPACE_SRGB, + .priv = 0 | MODE_RAW}, + {160, 120, V4L2_PIX_FMT_SN9C20X_I420, V4L2_FIELD_NONE, + .bytesperline = 240, + .sizeimage = 240 * 120, + .colorspace = V4L2_COLORSPACE_SRGB, + .priv = 0}, + {320, 240, V4L2_PIX_FMT_JPEG, V4L2_FIELD_NONE, + .bytesperline = 480, + .sizeimage = 480 * 240 , + .colorspace = V4L2_COLORSPACE_JPEG, + .priv = 1 | MODE_JPEG}, + {320, 240, V4L2_PIX_FMT_SBGGR8, V4L2_FIELD_NONE, + .bytesperline = 320, + .sizeimage = 320 * 240 , + .colorspace = V4L2_COLORSPACE_SRGB, + .priv = 1 | MODE_RAW}, + {320, 240, V4L2_PIX_FMT_SN9C20X_I420, V4L2_FIELD_NONE, + .bytesperline = 480, + .sizeimage = 480 * 240 , + .colorspace = V4L2_COLORSPACE_SRGB, + .priv = 1}, + {640, 480, V4L2_PIX_FMT_JPEG, V4L2_FIELD_NONE, + .bytesperline = 960, + .sizeimage = 960 * 480, + .colorspace = V4L2_COLORSPACE_JPEG, + .priv = 2 | MODE_JPEG}, + {640, 480, V4L2_PIX_FMT_SBGGR8, V4L2_FIELD_NONE, + .bytesperline = 640, + .sizeimage = 640 * 480, + .colorspace = V4L2_COLORSPACE_SRGB, + .priv = 2 | MODE_RAW}, + {640, 480, V4L2_PIX_FMT_SN9C20X_I420, V4L2_FIELD_NONE, + .bytesperline = 960, + .sizeimage = 960 * 480, + .colorspace = V4L2_COLORSPACE_SRGB, + .priv = 2}, + {1280, 1024, V4L2_PIX_FMT_SBGGR8, V4L2_FIELD_NONE, + .bytesperline = 1280, + .sizeimage = (1280 * 1024) + 64, + .colorspace = V4L2_COLORSPACE_SRGB, + .priv = 3 | MODE_RAW | MODE_SXGA}, +}; + +static const int hsv_red_x[] = { + 41, 44, 46, 48, 50, 52, 54, 56, + 58, 60, 62, 64, 66, 68, 70, 72, + 74, 76, 78, 80, 81, 83, 85, 87, + 88, 90, 92, 93, 95, 97, 98, 100, + 101, 102, 104, 105, 107, 108, 109, 110, + 112, 113, 114, 115, 116, 117, 118, 119, + 120, 121, 122, 123, 123, 124, 125, 125, + 126, 127, 127, 128, 128, 129, 129, 129, + 130, 130, 130, 130, 131, 131, 131, 131, + 131, 131, 131, 131, 130, 130, 130, 130, + 129, 129, 129, 128, 128, 127, 127, 126, + 125, 125, 124, 123, 122, 122, 121, 120, + 119, 118, 117, 116, 115, 114, 112, 111, + 110, 109, 107, 106, 105, 103, 102, 101, + 99, 98, 96, 94, 93, 91, 90, 88, + 86, 84, 83, 81, 79, 77, 75, 74, + 72, 70, 68, 66, 64, 62, 60, 58, + 56, 54, 52, 49, 47, 45, 43, 41, + 39, 36, 34, 32, 30, 28, 25, 23, + 21, 19, 16, 14, 12, 9, 7, 5, + 3, 0, -1, -3, -6, -8, -10, -12, + -15, -17, -19, -22, -24, -26, -28, -30, + -33, -35, -37, -39, -41, -44, -46, -48, + -50, -52, -54, -56, -58, -60, -62, -64, + -66, -68, -70, -72, -74, -76, -78, -80, + -81, -83, -85, -87, -88, -90, -92, -93, + -95, -97, -98, -100, -101, -102, -104, -105, + -107, -108, -109, -110, -112, -113, -114, -115, + -116, -117, -118, -119, -120, -121, -122, -123, + -123, -124, -125, -125, -126, -127, -127, -128, + -128, -128, -128, -128, -128, -128, -128, -128, + -128, -128, -128, -128, -128, -128, -128, -128, + -128, -128, -128, -128, -128, -128, -128, -128, + -128, -127, -127, -126, -125, -125, -124, -123, + -122, -122, -121, -120, -119, -118, -117, -116, + -115, -114, -112, -111, -110, -109, -107, -106, + -105, -103, -102, -101, -99, -98, -96, -94, + -93, -91, -90, -88, -86, -84, -83, -81, + -79, -77, -75, -74, -72, -70, -68, -66, + -64, -62, -60, -58, -56, -54, -52, -49, + -47, -45, -43, -41, -39, -36, -34, -32, + -30, -28, -25, -23, -21, -19, -16, -14, + -12, -9, -7, -5, -3, 0, 1, 3, + 6, 8, 10, 12, 15, 17, 19, 22, + 24, 26, 28, 30, 33, 35, 37, 39, 41 +}; + +static const int hsv_red_y[] = { + 82, 80, 78, 76, 74, 73, 71, 69, + 67, 65, 63, 61, 58, 56, 54, 52, + 50, 48, 46, 44, 41, 39, 37, 35, + 32, 30, 28, 26, 23, 21, 19, 16, + 14, 12, 10, 7, 5, 3, 0, -1, + -3, -6, -8, -10, -13, -15, -17, -19, + -22, -24, -26, -29, -31, -33, -35, -38, + -40, -42, -44, -46, -48, -51, -53, -55, + -57, -59, -61, -63, -65, -67, -69, -71, + -73, -75, -77, -79, -81, -82, -84, -86, + -88, -89, -91, -93, -94, -96, -98, -99, + -101, -102, -104, -105, -106, -108, -109, -110, + -112, -113, -114, -115, -116, -117, -119, -120, + -120, -121, -122, -123, -124, -125, -126, -126, + -127, -128, -128, -128, -128, -128, -128, -128, + -128, -128, -128, -128, -128, -128, -128, -128, + -128, -128, -128, -128, -128, -128, -128, -128, + -128, -128, -128, -128, -128, -128, -128, -128, + -127, -127, -126, -125, -125, -124, -123, -122, + -121, -120, -119, -118, -117, -116, -115, -114, + -113, -111, -110, -109, -107, -106, -105, -103, + -102, -100, -99, -97, -96, -94, -92, -91, + -89, -87, -85, -84, -82, -80, -78, -76, + -74, -73, -71, -69, -67, -65, -63, -61, + -58, -56, -54, -52, -50, -48, -46, -44, + -41, -39, -37, -35, -32, -30, -28, -26, + -23, -21, -19, -16, -14, -12, -10, -7, + -5, -3, 0, 1, 3, 6, 8, 10, + 13, 15, 17, 19, 22, 24, 26, 29, + 31, 33, 35, 38, 40, 42, 44, 46, + 48, 51, 53, 55, 57, 59, 61, 63, + 65, 67, 69, 71, 73, 75, 77, 79, + 81, 82, 84, 86, 88, 89, 91, 93, + 94, 96, 98, 99, 101, 102, 104, 105, + 106, 108, 109, 110, 112, 113, 114, 115, + 116, 117, 119, 120, 120, 121, 122, 123, + 124, 125, 126, 126, 127, 128, 128, 129, + 129, 130, 130, 131, 131, 131, 131, 132, + 132, 132, 132, 132, 132, 132, 132, 132, + 132, 132, 132, 131, 131, 131, 130, 130, + 130, 129, 129, 128, 127, 127, 126, 125, + 125, 124, 123, 122, 121, 120, 119, 118, + 117, 116, 115, 114, 113, 111, 110, 109, + 107, 106, 105, 103, 102, 100, 99, 97, + 96, 94, 92, 91, 89, 87, 85, 84, 82 +}; + +static const int hsv_green_x[] = { + -124, -124, -125, -125, -125, -125, -125, -125, + -125, -126, -126, -125, -125, -125, -125, -125, + -125, -124, -124, -124, -123, -123, -122, -122, + -121, -121, -120, -120, -119, -118, -117, -117, + -116, -115, -114, -113, -112, -111, -110, -109, + -108, -107, -105, -104, -103, -102, -100, -99, + -98, -96, -95, -93, -92, -91, -89, -87, + -86, -84, -83, -81, -79, -77, -76, -74, + -72, -70, -69, -67, -65, -63, -61, -59, + -57, -55, -53, -51, -49, -47, -45, -43, + -41, -39, -37, -35, -33, -30, -28, -26, + -24, -22, -20, -18, -15, -13, -11, -9, + -7, -4, -2, 0, 1, 3, 6, 8, + 10, 12, 14, 17, 19, 21, 23, 25, + 27, 29, 32, 34, 36, 38, 40, 42, + 44, 46, 48, 50, 52, 54, 56, 58, + 60, 62, 64, 66, 68, 70, 71, 73, + 75, 77, 78, 80, 82, 83, 85, 87, + 88, 90, 91, 93, 94, 96, 97, 98, + 100, 101, 102, 104, 105, 106, 107, 108, + 109, 111, 112, 113, 113, 114, 115, 116, + 117, 118, 118, 119, 120, 120, 121, 122, + 122, 123, 123, 124, 124, 124, 125, 125, + 125, 125, 125, 125, 125, 126, 126, 125, + 125, 125, 125, 125, 125, 124, 124, 124, + 123, 123, 122, 122, 121, 121, 120, 120, + 119, 118, 117, 117, 116, 115, 114, 113, + 112, 111, 110, 109, 108, 107, 105, 104, + 103, 102, 100, 99, 98, 96, 95, 93, + 92, 91, 89, 87, 86, 84, 83, 81, + 79, 77, 76, 74, 72, 70, 69, 67, + 65, 63, 61, 59, 57, 55, 53, 51, + 49, 47, 45, 43, 41, 39, 37, 35, + 33, 30, 28, 26, 24, 22, 20, 18, + 15, 13, 11, 9, 7, 4, 2, 0, + -1, -3, -6, -8, -10, -12, -14, -17, + -19, -21, -23, -25, -27, -29, -32, -34, + -36, -38, -40, -42, -44, -46, -48, -50, + -52, -54, -56, -58, -60, -62, -64, -66, + -68, -70, -71, -73, -75, -77, -78, -80, + -82, -83, -85, -87, -88, -90, -91, -93, + -94, -96, -97, -98, -100, -101, -102, -104, + -105, -106, -107, -108, -109, -111, -112, -113, + -113, -114, -115, -116, -117, -118, -118, -119, + -120, -120, -121, -122, -122, -123, -123, -124, -124 +}; + +static const int hsv_green_y[] = { + -100, -99, -98, -97, -95, -94, -93, -91, + -90, -89, -87, -86, -84, -83, -81, -80, + -78, -76, -75, -73, -71, -70, -68, -66, + -64, -63, -61, -59, -57, -55, -53, -51, + -49, -48, -46, -44, -42, -40, -38, -36, + -34, -32, -30, -27, -25, -23, -21, -19, + -17, -15, -13, -11, -9, -7, -4, -2, + 0, 1, 3, 5, 7, 9, 11, 14, + 16, 18, 20, 22, 24, 26, 28, 30, + 32, 34, 36, 38, 40, 42, 44, 46, + 48, 50, 52, 54, 56, 58, 59, 61, + 63, 65, 67, 68, 70, 72, 74, 75, + 77, 78, 80, 82, 83, 85, 86, 88, + 89, 90, 92, 93, 95, 96, 97, 98, + 100, 101, 102, 103, 104, 105, 106, 107, + 108, 109, 110, 111, 112, 112, 113, 114, + 115, 115, 116, 116, 117, 117, 118, 118, + 119, 119, 119, 120, 120, 120, 120, 120, + 121, 121, 121, 121, 121, 121, 120, 120, + 120, 120, 120, 119, 119, 119, 118, 118, + 117, 117, 116, 116, 115, 114, 114, 113, + 112, 111, 111, 110, 109, 108, 107, 106, + 105, 104, 103, 102, 100, 99, 98, 97, + 95, 94, 93, 91, 90, 89, 87, 86, + 84, 83, 81, 80, 78, 76, 75, 73, + 71, 70, 68, 66, 64, 63, 61, 59, + 57, 55, 53, 51, 49, 48, 46, 44, + 42, 40, 38, 36, 34, 32, 30, 27, + 25, 23, 21, 19, 17, 15, 13, 11, + 9, 7, 4, 2, 0, -1, -3, -5, + -7, -9, -11, -14, -16, -18, -20, -22, + -24, -26, -28, -30, -32, -34, -36, -38, + -40, -42, -44, -46, -48, -50, -52, -54, + -56, -58, -59, -61, -63, -65, -67, -68, + -70, -72, -74, -75, -77, -78, -80, -82, + -83, -85, -86, -88, -89, -90, -92, -93, + -95, -96, -97, -98, -100, -101, -102, -103, + -104, -105, -106, -107, -108, -109, -110, -111, + -112, -112, -113, -114, -115, -115, -116, -116, + -117, -117, -118, -118, -119, -119, -119, -120, + -120, -120, -120, -120, -121, -121, -121, -121, + -121, -121, -120, -120, -120, -120, -120, -119, + -119, -119, -118, -118, -117, -117, -116, -116, + -115, -114, -114, -113, -112, -111, -111, -110, + -109, -108, -107, -106, -105, -104, -103, -102, -100 +}; + +static const int hsv_blue_x[] = { + 112, 113, 114, 114, 115, 116, 117, 117, + 118, 118, 119, 119, 120, 120, 120, 121, + 121, 121, 122, 122, 122, 122, 122, 122, + 122, 122, 122, 122, 122, 122, 121, 121, + 121, 120, 120, 120, 119, 119, 118, 118, + 117, 116, 116, 115, 114, 113, 113, 112, + 111, 110, 109, 108, 107, 106, 105, 104, + 103, 102, 100, 99, 98, 97, 95, 94, + 93, 91, 90, 88, 87, 85, 84, 82, + 80, 79, 77, 76, 74, 72, 70, 69, + 67, 65, 63, 61, 60, 58, 56, 54, + 52, 50, 48, 46, 44, 42, 40, 38, + 36, 34, 32, 30, 28, 26, 24, 22, + 19, 17, 15, 13, 11, 9, 7, 5, + 2, 0, -1, -3, -5, -7, -9, -12, + -14, -16, -18, -20, -22, -24, -26, -28, + -31, -33, -35, -37, -39, -41, -43, -45, + -47, -49, -51, -53, -54, -56, -58, -60, + -62, -64, -66, -67, -69, -71, -73, -74, + -76, -78, -79, -81, -83, -84, -86, -87, + -89, -90, -92, -93, -94, -96, -97, -98, + -99, -101, -102, -103, -104, -105, -106, -107, + -108, -109, -110, -111, -112, -113, -114, -114, + -115, -116, -117, -117, -118, -118, -119, -119, + -120, -120, -120, -121, -121, -121, -122, -122, + -122, -122, -122, -122, -122, -122, -122, -122, + -122, -122, -121, -121, -121, -120, -120, -120, + -119, -119, -118, -118, -117, -116, -116, -115, + -114, -113, -113, -112, -111, -110, -109, -108, + -107, -106, -105, -104, -103, -102, -100, -99, + -98, -97, -95, -94, -93, -91, -90, -88, + -87, -85, -84, -82, -80, -79, -77, -76, + -74, -72, -70, -69, -67, -65, -63, -61, + -60, -58, -56, -54, -52, -50, -48, -46, + -44, -42, -40, -38, -36, -34, -32, -30, + -28, -26, -24, -22, -19, -17, -15, -13, + -11, -9, -7, -5, -2, 0, 1, 3, + 5, 7, 9, 12, 14, 16, 18, 20, + 22, 24, 26, 28, 31, 33, 35, 37, + 39, 41, 43, 45, 47, 49, 51, 53, + 54, 56, 58, 60, 62, 64, 66, 67, + 69, 71, 73, 74, 76, 78, 79, 81, + 83, 84, 86, 87, 89, 90, 92, 93, + 94, 96, 97, 98, 99, 101, 102, 103, + 104, 105, 106, 107, 108, 109, 110, 111, 112 +}; + +static const int hsv_blue_y[] = { + -11, -13, -15, -17, -19, -21, -23, -25, + -27, -29, -31, -33, -35, -37, -39, -41, + -43, -45, -46, -48, -50, -52, -54, -55, + -57, -59, -61, -62, -64, -66, -67, -69, + -71, -72, -74, -75, -77, -78, -80, -81, + -83, -84, -86, -87, -88, -90, -91, -92, + -93, -95, -96, -97, -98, -99, -100, -101, + -102, -103, -104, -105, -106, -106, -107, -108, + -109, -109, -110, -111, -111, -112, -112, -113, + -113, -114, -114, -114, -115, -115, -115, -115, + -116, -116, -116, -116, -116, -116, -116, -116, + -116, -115, -115, -115, -115, -114, -114, -114, + -113, -113, -112, -112, -111, -111, -110, -110, + -109, -108, -108, -107, -106, -105, -104, -103, + -102, -101, -100, -99, -98, -97, -96, -95, + -94, -93, -91, -90, -89, -88, -86, -85, + -84, -82, -81, -79, -78, -76, -75, -73, + -71, -70, -68, -67, -65, -63, -62, -60, + -58, -56, -55, -53, -51, -49, -47, -45, + -44, -42, -40, -38, -36, -34, -32, -30, + -28, -26, -24, -22, -20, -18, -16, -14, + -12, -10, -8, -6, -4, -2, 0, 1, + 3, 5, 7, 9, 11, 13, 15, 17, + 19, 21, 23, 25, 27, 29, 31, 33, + 35, 37, 39, 41, 43, 45, 46, 48, + 50, 52, 54, 55, 57, 59, 61, 62, + 64, 66, 67, 69, 71, 72, 74, 75, + 77, 78, 80, 81, 83, 84, 86, 87, + 88, 90, 91, 92, 93, 95, 96, 97, + 98, 99, 100, 101, 102, 103, 104, 105, + 106, 106, 107, 108, 109, 109, 110, 111, + 111, 112, 112, 113, 113, 114, 114, 114, + 115, 115, 115, 115, 116, 116, 116, 116, + 116, 116, 116, 116, 116, 115, 115, 115, + 115, 114, 114, 114, 113, 113, 112, 112, + 111, 111, 110, 110, 109, 108, 108, 107, + 106, 105, 104, 103, 102, 101, 100, 99, + 98, 97, 96, 95, 94, 93, 91, 90, + 89, 88, 86, 85, 84, 82, 81, 79, + 78, 76, 75, 73, 71, 70, 68, 67, + 65, 63, 62, 60, 58, 56, 55, 53, + 51, 49, 47, 45, 44, 42, 40, 38, + 36, 34, 32, 30, 28, 26, 24, 22, + 20, 18, 16, 14, 12, 10, 8, 6, + 4, 2, 0, -1, -3, -5, -7, -9, -11 +}; + +static u16 i2c_ident[] = { + V4L2_IDENT_OV9650, + V4L2_IDENT_OV9655, + V4L2_IDENT_SOI968, + V4L2_IDENT_OV7660, + V4L2_IDENT_OV7670, + V4L2_IDENT_MT9V011, + V4L2_IDENT_MT9V111, + V4L2_IDENT_MT9V112, + V4L2_IDENT_MT9M001C12ST, + V4L2_IDENT_MT9M111, + V4L2_IDENT_HV7131R, +}; + +static u16 bridge_init[][2] = { + {0x1000, 0x78}, {0x1001, 0x40}, {0x1002, 0x1c}, + {0x1020, 0x80}, {0x1061, 0x01}, {0x1067, 0x40}, + {0x1068, 0x30}, {0x1069, 0x20}, {0x106a, 0x10}, + {0x106b, 0x08}, {0x1188, 0x87}, {0x11a1, 0x00}, + {0x11a2, 0x00}, {0x11a3, 0x6a}, {0x11a4, 0x50}, + {0x11ab, 0x00}, {0x11ac, 0x00}, {0x11ad, 0x50}, + {0x11ae, 0x3c}, {0x118a, 0x04}, {0x0395, 0x04}, + {0x11b8, 0x3a}, {0x118b, 0x0e}, {0x10f7, 0x05}, + {0x10f8, 0x14}, {0x10fa, 0xff}, {0x10f9, 0x00}, + {0x11ba, 0x0a}, {0x11a5, 0x2d}, {0x11a6, 0x2d}, + {0x11a7, 0x3a}, {0x11a8, 0x05}, {0x11a9, 0x04}, + {0x11aa, 0x3f}, {0x11af, 0x28}, {0x11b0, 0xd8}, + {0x11b1, 0x14}, {0x11b2, 0xec}, {0x11b3, 0x32}, + {0x11b4, 0xdd}, {0x11b5, 0x32}, {0x11b6, 0xdd}, + {0x10e0, 0x2c}, {0x11bc, 0x40}, {0x11bd, 0x01}, + {0x11be, 0xf0}, {0x11bf, 0x00}, {0x118c, 0x1f}, + {0x118d, 0x1f}, {0x118e, 0x1f}, {0x118f, 0x1f}, + {0x1180, 0x01}, {0x1181, 0x00}, {0x1182, 0x01}, + {0x1183, 0x00}, {0x1184, 0x50}, {0x1185, 0x80} +}; + +/* Gain = (bit[3:0] / 16 + 1) * (bit[4] + 1) * (bit[5] + 1) * (bit[6] + 1) */ +static u8 ov_gain[] = { + 0x00 /* 1x */, 0x04 /* 1.25x */, 0x08 /* 1.5x */, 0x0c /* 1.75x */, + 0x10 /* 2x */, 0x12 /* 2.25x */, 0x14 /* 2.5x */, 0x16 /* 2.75x */, + 0x18 /* 3x */, 0x1a /* 3.25x */, 0x1c /* 3.5x */, 0x1e /* 3.75x */, + 0x30 /* 4x */, 0x31 /* 4.25x */, 0x32 /* 4.5x */, 0x33 /* 4.75x */, + 0x34 /* 5x */, 0x35 /* 5.25x */, 0x36 /* 5.5x */, 0x37 /* 5.75x */, + 0x38 /* 6x */, 0x39 /* 6.25x */, 0x3a /* 6.5x */, 0x3b /* 6.75x */, + 0x3c /* 7x */, 0x3d /* 7.25x */, 0x3e /* 7.5x */, 0x3f /* 7.75x */, + 0x70 /* 8x */ +}; + +/* Gain = (bit[8] + 1) * (bit[7] + 1) * (bit[6:0] * 0.03125) */ +static u16 micron1_gain[] = { + /* 1x 1.25x 1.5x 1.75x */ + 0x0020, 0x0028, 0x0030, 0x0038, + /* 2x 2.25x 2.5x 2.75x */ + 0x00a0, 0x00a4, 0x00a8, 0x00ac, + /* 3x 3.25x 3.5x 3.75x */ + 0x00b0, 0x00b4, 0x00b8, 0x00bc, + /* 4x 4.25x 4.5x 4.75x */ + 0x00c0, 0x00c4, 0x00c8, 0x00cc, + /* 5x 5.25x 5.5x 5.75x */ + 0x00d0, 0x00d4, 0x00d8, 0x00dc, + /* 6x 6.25x 6.5x 6.75x */ + 0x00e0, 0x00e4, 0x00e8, 0x00ec, + /* 7x 7.25x 7.5x 7.75x */ + 0x00f0, 0x00f4, 0x00f8, 0x00fc, + /* 8x */ + 0x01c0 +}; + +/* mt9m001 sensor uses a different gain formula then other micron sensors */ +/* Gain = (bit[6] + 1) * (bit[5-0] * 0.125) */ +static u16 micron2_gain[] = { + /* 1x 1.25x 1.5x 1.75x */ + 0x0008, 0x000a, 0x000c, 0x000e, + /* 2x 2.25x 2.5x 2.75x */ + 0x0010, 0x0012, 0x0014, 0x0016, + /* 3x 3.25x 3.5x 3.75x */ + 0x0018, 0x001a, 0x001c, 0x001e, + /* 4x 4.25x 4.5x 4.75x */ + 0x0020, 0x0051, 0x0052, 0x0053, + /* 5x 5.25x 5.5x 5.75x */ + 0x0054, 0x0055, 0x0056, 0x0057, + /* 6x 6.25x 6.5x 6.75x */ + 0x0058, 0x0059, 0x005a, 0x005b, + /* 7x 7.25x 7.5x 7.75x */ + 0x005c, 0x005d, 0x005e, 0x005f, + /* 8x */ + 0x0060 +}; + +/* Gain = .5 + bit[7:0] / 16 */ +static u8 hv7131r_gain[] = { + 0x08 /* 1x */, 0x0c /* 1.25x */, 0x10 /* 1.5x */, 0x14 /* 1.75x */, + 0x18 /* 2x */, 0x1c /* 2.25x */, 0x20 /* 2.5x */, 0x24 /* 2.75x */, + 0x28 /* 3x */, 0x2c /* 3.25x */, 0x30 /* 3.5x */, 0x34 /* 3.75x */, + 0x38 /* 4x */, 0x3c /* 4.25x */, 0x40 /* 4.5x */, 0x44 /* 4.75x */, + 0x48 /* 5x */, 0x4c /* 5.25x */, 0x50 /* 5.5x */, 0x54 /* 5.75x */, + 0x58 /* 6x */, 0x5c /* 6.25x */, 0x60 /* 6.5x */, 0x64 /* 6.75x */, + 0x68 /* 7x */, 0x6c /* 7.25x */, 0x70 /* 7.5x */, 0x74 /* 7.75x */, + 0x78 /* 8x */ +}; + +static u8 soi968_init[][2] = { + {0x12, 0x80}, {0x0c, 0x00}, {0x0f, 0x1f}, + {0x11, 0x80}, {0x38, 0x52}, {0x1e, 0x00}, + {0x33, 0x08}, {0x35, 0x8c}, {0x36, 0x0c}, + {0x37, 0x04}, {0x45, 0x04}, {0x47, 0xff}, + {0x3e, 0x00}, {0x3f, 0x00}, {0x3b, 0x20}, + {0x3a, 0x96}, {0x3d, 0x0a}, {0x14, 0x8e}, + {0x13, 0x8a}, {0x12, 0x40}, {0x17, 0x13}, + {0x18, 0x63}, {0x19, 0x01}, {0x1a, 0x79}, + {0x32, 0x24}, {0x03, 0x00}, {0x11, 0x40}, + {0x2a, 0x10}, {0x2b, 0xe0}, {0x10, 0x32}, + {0x00, 0x00}, {0x01, 0x80}, {0x02, 0x80}, +}; + +static u8 ov7660_init[][2] = { + {0x0e, 0x80}, {0x0d, 0x08}, {0x0f, 0xc3}, + {0x04, 0xc3}, {0x10, 0x40}, {0x11, 0x40}, + {0x12, 0x05}, {0x13, 0xba}, {0x14, 0x2a}, + {0x37, 0x0f}, {0x38, 0x02}, {0x39, 0x43}, + {0x3a, 0x00}, {0x69, 0x90}, {0x2d, 0xf6}, + {0x2e, 0x0b}, {0x01, 0x78}, {0x02, 0x50}, +}; + +static u8 ov7670_init[][2] = { + {0x12, 0x80}, {0x11, 0x80}, {0x3a, 0x04}, {0x12, 0x01}, + {0x32, 0xb6}, {0x03, 0x0a}, {0x0c, 0x00}, {0x3e, 0x00}, + {0x70, 0x3a}, {0x71, 0x35}, {0x72, 0x11}, {0x73, 0xf0}, + {0xa2, 0x02}, {0x13, 0xe0}, {0x00, 0x00}, {0x10, 0x00}, + {0x0d, 0x40}, {0x14, 0x28}, {0xa5, 0x05}, {0xab, 0x07}, + {0x24, 0x95}, {0x25, 0x33}, {0x26, 0xe3}, {0x9f, 0x75}, + {0xa0, 0x65}, {0xa1, 0x0b}, {0xa6, 0xd8}, {0xa7, 0xd8}, + {0xa8, 0xf0}, {0xa9, 0x90}, {0xaa, 0x94}, {0x13, 0xe5}, + {0x0e, 0x61}, {0x0f, 0x4b}, {0x16, 0x02}, {0x1e, 0x27}, + {0x21, 0x02}, {0x22, 0x91}, {0x29, 0x07}, {0x33, 0x0b}, + {0x35, 0x0b}, {0x37, 0x1d}, {0x38, 0x71}, {0x39, 0x2a}, + {0x3c, 0x78}, {0x4d, 0x40}, {0x4e, 0x20}, {0x69, 0x00}, + {0x74, 0x19}, {0x8d, 0x4f}, {0x8e, 0x00}, {0x8f, 0x00}, + {0x90, 0x00}, {0x91, 0x00}, {0x96, 0x00}, {0x9a, 0x80}, + {0xb0, 0x84}, {0xb1, 0x0c}, {0xb2, 0x0e}, {0xb3, 0x82}, + {0xb8, 0x0a}, {0x43, 0x0a}, {0x44, 0xf0}, {0x45, 0x20}, + {0x46, 0x7d}, {0x47, 0x29}, {0x48, 0x4a}, {0x59, 0x8c}, + {0x5a, 0xa5}, {0x5b, 0xde}, {0x5c, 0x96}, {0x5d, 0x66}, + {0x5e, 0x10}, {0x6c, 0x0a}, {0x6d, 0x55}, {0x6e, 0x11}, + {0x6f, 0x9e}, {0x6a, 0x40}, {0x01, 0x40}, {0x02, 0x40}, + {0x13, 0xe7}, {0x4f, 0x6e}, {0x50, 0x70}, {0x51, 0x02}, + {0x52, 0x1d}, {0x53, 0x56}, {0x54, 0x73}, {0x55, 0x0a}, + {0x56, 0x55}, {0x57, 0x80}, {0x58, 0x9e}, {0x41, 0x08}, + {0x3f, 0x02}, {0x75, 0x03}, {0x76, 0x63}, {0x4c, 0x04}, + {0x77, 0x06}, {0x3d, 0x02}, {0x4b, 0x09}, {0xc9, 0x30}, + {0x41, 0x08}, {0x56, 0x48}, {0x34, 0x11}, {0xa4, 0x88}, + {0x96, 0x00}, {0x97, 0x30}, {0x98, 0x20}, {0x99, 0x30}, + {0x9a, 0x84}, {0x9b, 0x29}, {0x9c, 0x03}, {0x9d, 0x99}, + {0x9e, 0x7f}, {0x78, 0x04}, {0x79, 0x01}, {0xc8, 0xf0}, + {0x79, 0x0f}, {0xc8, 0x00}, {0x79, 0x10}, {0xc8, 0x7e}, + {0x79, 0x0a}, {0xc8, 0x80}, {0x79, 0x0b}, {0xc8, 0x01}, + {0x79, 0x0c}, {0xc8, 0x0f}, {0x79, 0x0d}, {0xc8, 0x20}, + {0x79, 0x09}, {0xc8, 0x80}, {0x79, 0x02}, {0xc8, 0xc0}, + {0x79, 0x03}, {0xc8, 0x40}, {0x79, 0x05}, {0xc8, 0x30}, + {0x79, 0x26}, {0x62, 0x20}, {0x63, 0x00}, {0x64, 0x06}, + {0x65, 0x00}, {0x66, 0x05}, {0x94, 0x05}, {0x95, 0x0a}, + {0x17, 0x13}, {0x18, 0x01}, {0x19, 0x02}, {0x1a, 0x7a}, + {0x46, 0x59}, {0x47, 0x30}, {0x58, 0x9a}, {0x59, 0x84}, + {0x5a, 0x91}, {0x5b, 0x57}, {0x5c, 0x75}, {0x5d, 0x6d}, + {0x5e, 0x13}, {0x64, 0x07}, {0x94, 0x07}, {0x95, 0x0d}, + {0xa6, 0xdf}, {0xa7, 0xdf}, {0x48, 0x4d}, {0x51, 0x00}, + {0x6b, 0x0a}, {0x11, 0x80}, {0x2a, 0x00}, {0x2b, 0x00}, + {0x92, 0x00}, {0x93, 0x00}, {0x55, 0x0a}, {0x56, 0x60}, + {0x4f, 0x6e}, {0x50, 0x70}, {0x51, 0x00}, {0x52, 0x1d}, + {0x53, 0x56}, {0x54, 0x73}, {0x58, 0x9a}, {0x4f, 0x6e}, + {0x50, 0x70}, {0x51, 0x00}, {0x52, 0x1d}, {0x53, 0x56}, + {0x54, 0x73}, {0x58, 0x9a}, {0x3f, 0x01}, {0x7b, 0x03}, + {0x7c, 0x09}, {0x7d, 0x16}, {0x7e, 0x38}, {0x7f, 0x47}, + {0x80, 0x53}, {0x81, 0x5e}, {0x82, 0x6a}, {0x83, 0x74}, + {0x84, 0x80}, {0x85, 0x8c}, {0x86, 0x9b}, {0x87, 0xb2}, + {0x88, 0xcc}, {0x89, 0xe5}, {0x7a, 0x24}, {0x3b, 0x00}, + {0x9f, 0x76}, {0xa0, 0x65}, {0x13, 0xe2}, {0x6b, 0x0a}, + {0x11, 0x80}, {0x2a, 0x00}, {0x2b, 0x00}, {0x92, 0x00}, + {0x93, 0x00}, +}; + +static u8 ov9650_init[][2] = { + {0x12, 0x80}, {0x00, 0x00}, {0x01, 0x78}, + {0x02, 0x78}, {0x03, 0x36}, {0x04, 0x03}, + {0x05, 0x00}, {0x06, 0x00}, {0x08, 0x00}, + {0x09, 0x01}, {0x0c, 0x00}, {0x0d, 0x00}, + {0x0e, 0xa0}, {0x0f, 0x52}, {0x10, 0x7c}, + {0x11, 0x80}, {0x12, 0x45}, {0x13, 0xc2}, + {0x14, 0x2e}, {0x15, 0x00}, {0x16, 0x07}, + {0x17, 0x24}, {0x18, 0xc5}, {0x19, 0x00}, + {0x1a, 0x3c}, {0x1b, 0x00}, {0x1e, 0x04}, + {0x1f, 0x00}, {0x24, 0x78}, {0x25, 0x68}, + {0x26, 0xd4}, {0x27, 0x80}, {0x28, 0x80}, + {0x29, 0x30}, {0x2a, 0x00}, {0x2b, 0x00}, + {0x2c, 0x80}, {0x2d, 0x00}, {0x2e, 0x00}, + {0x2f, 0x00}, {0x30, 0x08}, {0x31, 0x30}, + {0x32, 0x84}, {0x33, 0xe2}, {0x34, 0xbf}, + {0x35, 0x81}, {0x36, 0xf9}, {0x37, 0x00}, + {0x38, 0x93}, {0x39, 0x50}, {0x3a, 0x01}, + {0x3b, 0x01}, {0x3c, 0x73}, {0x3d, 0x19}, + {0x3e, 0x0b}, {0x3f, 0x80}, {0x40, 0xc1}, + {0x41, 0x00}, {0x42, 0x08}, {0x67, 0x80}, + {0x68, 0x80}, {0x69, 0x40}, {0x6a, 0x00}, + {0x6b, 0x0a}, {0x8b, 0x06}, {0x8c, 0x20}, + {0x8d, 0x00}, {0x8e, 0x00}, {0x8f, 0xdf}, + {0x92, 0x00}, {0x93, 0x00}, {0x94, 0x88}, + {0x95, 0x88}, {0x96, 0x04}, {0xa1, 0x00}, + {0xa5, 0x80}, {0xa8, 0x80}, {0xa9, 0xb8}, + {0xaa, 0x92}, {0xab, 0x0a}, +}; + +static u8 ov9655_init[][2] = { + {0x12, 0x80}, {0x12, 0x01}, {0x0d, 0x00}, {0x0e, 0x61}, + {0x11, 0x80}, {0x13, 0xba}, {0x14, 0x2e}, {0x16, 0x24}, + {0x1e, 0x04}, {0x1e, 0x04}, {0x1e, 0x04}, {0x27, 0x08}, + {0x28, 0x08}, {0x29, 0x15}, {0x2c, 0x08}, {0x32, 0xbf}, + {0x34, 0x3d}, {0x35, 0x00}, {0x36, 0xf8}, {0x38, 0x12}, + {0x39, 0x57}, {0x3a, 0x00}, {0x3b, 0xcc}, {0x3c, 0x0c}, + {0x3d, 0x19}, {0x3e, 0x0c}, {0x3f, 0x01}, {0x41, 0x40}, + {0x42, 0x80}, {0x45, 0x46}, {0x46, 0x62}, {0x47, 0x2a}, + {0x48, 0x3c}, {0x4a, 0xf0}, {0x4b, 0xdc}, {0x4c, 0xdc}, + {0x4d, 0xdc}, {0x4e, 0xdc}, {0x69, 0x02}, {0x6c, 0x04}, + {0x6f, 0x9e}, {0x70, 0x05}, {0x71, 0x78}, {0x77, 0x02}, + {0x8a, 0x23}, {0x8c, 0x0d}, {0x90, 0x7e}, {0x91, 0x7c}, + {0x9f, 0x6e}, {0xa0, 0x6e}, {0xa5, 0x68}, {0xa6, 0x60}, + {0xa8, 0xc1}, {0xa9, 0xfa}, {0xaa, 0x92}, {0xab, 0x04}, + {0xac, 0x80}, {0xad, 0x80}, {0xae, 0x80}, {0xaf, 0x80}, + {0xb2, 0xf2}, {0xb3, 0x20}, {0xb5, 0x00}, {0xb6, 0xaf}, + {0xbb, 0xae}, {0xbc, 0x44}, {0xbd, 0x44}, {0xbe, 0x3b}, + {0xbf, 0x3a}, {0xc0, 0xe2}, {0xc1, 0xc8}, {0xc2, 0x01}, + {0xc4, 0x00}, {0xc6, 0x85}, {0xc7, 0x81}, {0xc9, 0xe0}, + {0xca, 0xe8}, {0xcc, 0xd8}, {0xcd, 0x93}, {0x12, 0x61}, + {0x36, 0xfa}, {0x8c, 0x8d}, {0xc0, 0xaa}, {0x69, 0x0a}, + {0x03, 0x12}, {0x17, 0x14}, {0x18, 0x00}, {0x19, 0x01}, + {0x1a, 0x3d}, {0x32, 0xbf}, {0x11, 0x80}, {0x2a, 0x10}, + {0x2b, 0x0a}, {0x92, 0x00}, {0x93, 0x00}, {0x1e, 0x04}, + {0x1e, 0x04}, {0x10, 0x7c}, {0x04, 0x03}, {0xa1, 0x00}, + {0x2d, 0x00}, {0x2e, 0x00}, {0x00, 0x00}, {0x01, 0x80}, + {0x02, 0x80}, {0x12, 0x61}, {0x36, 0xfa}, {0x8c, 0x8d}, + {0xc0, 0xaa}, {0x69, 0x0a}, {0x03, 0x12}, {0x17, 0x14}, + {0x18, 0x00}, {0x19, 0x01}, {0x1a, 0x3d}, {0x32, 0xbf}, + {0x11, 0x80}, {0x2a, 0x10}, {0x2b, 0x0a}, {0x92, 0x00}, + {0x93, 0x00}, {0x04, 0x01}, {0x10, 0x1f}, {0xa1, 0x00}, + {0x00, 0x0a}, {0xa1, 0x00}, {0x10, 0x5d}, {0x04, 0x03}, + {0x00, 0x01}, {0xa1, 0x00}, {0x10, 0x7c}, {0x04, 0x03}, + {0x00, 0x03}, {0x00, 0x0a}, {0x00, 0x10}, {0x00, 0x13}, +}; + +static u16 mt9v112_init[][2] = { + {0xf0, 0x0000}, {0x0d, 0x0021}, {0x0d, 0x0020}, + {0x34, 0xc019}, {0x0a, 0x0011}, {0x0b, 0x000b}, + {0x20, 0x0703}, {0x35, 0x2022}, {0xf0, 0x0001}, + {0x05, 0x0000}, {0x06, 0x340c}, {0x3b, 0x042a}, + {0x3c, 0x0400}, {0xf0, 0x0002}, {0x2e, 0x0c58}, + {0x5b, 0x0001}, {0xc8, 0x9f0b}, {0xf0, 0x0001}, + {0x9b, 0x5300}, {0xf0, 0x0000}, {0x2b, 0x0020}, + {0x2c, 0x002a}, {0x2d, 0x0032}, {0x2e, 0x0020}, + {0x09, 0x01dc}, {0x01, 0x000c}, {0x02, 0x0020}, + {0x03, 0x01e0}, {0x04, 0x0280}, {0x06, 0x000c}, + {0x05, 0x0098}, {0x20, 0x0703}, {0x09, 0x01f2}, + {0x2b, 0x00a0}, {0x2c, 0x00a0}, {0x2d, 0x00a0}, + {0x2e, 0x00a0}, {0x01, 0x000c}, {0x02, 0x0020}, + {0x03, 0x01e0}, {0x04, 0x0280}, {0x06, 0x000c}, + {0x05, 0x0098}, {0x09, 0x01c1}, {0x2b, 0x00ae}, + {0x2c, 0x00ae}, {0x2d, 0x00ae}, {0x2e, 0x00ae}, +}; + +static u16 mt9v111_init[][2] = { + {0x01, 0x0004}, {0x0d, 0x0001}, {0x0d, 0x0000}, + {0x01, 0x0001}, {0x02, 0x0016}, {0x03, 0x01e1}, + {0x04, 0x0281}, {0x05, 0x0004}, {0x07, 0x3002}, + {0x21, 0x0000}, {0x25, 0x4024}, {0x26, 0xff03}, + {0x27, 0xff10}, {0x2b, 0x7828}, {0x2c, 0xb43c}, + {0x2d, 0xf0a0}, {0x2e, 0x0c64}, {0x2f, 0x0064}, + {0x67, 0x4010}, {0x06, 0x301e}, {0x08, 0x0480}, + {0x01, 0x0004}, {0x02, 0x0016}, {0x03, 0x01e6}, + {0x04, 0x0286}, {0x05, 0x0004}, {0x06, 0x0000}, + {0x07, 0x3002}, {0x08, 0x0008}, {0x0c, 0x0000}, + {0x0d, 0x0000}, {0x0e, 0x0000}, {0x0f, 0x0000}, + {0x10, 0x0000}, {0x11, 0x0000}, {0x12, 0x00b0}, + {0x13, 0x007c}, {0x14, 0x0000}, {0x15, 0x0000}, + {0x16, 0x0000}, {0x17, 0x0000}, {0x18, 0x0000}, + {0x19, 0x0000}, {0x1a, 0x0000}, {0x1b, 0x0000}, + {0x1c, 0x0000}, {0x1d, 0x0000}, {0x30, 0x0000}, + {0x30, 0x0005}, {0x31, 0x0000}, {0x02, 0x0016}, + {0x03, 0x01e1}, {0x04, 0x0281}, {0x05, 0x0004}, + {0x06, 0x0000}, {0x07, 0x3002}, {0x06, 0x002d}, + {0x05, 0x0004}, {0x09, 0x0064}, {0x2b, 0x00a0}, + {0x2c, 0x00a0}, {0x2d, 0x00a0}, {0x2e, 0x00a0}, + {0x02, 0x0016}, {0x03, 0x01e1}, {0x04, 0x0281}, + {0x05, 0x0004}, {0x06, 0x002d}, {0x07, 0x3002}, + {0x0e, 0x0008}, {0x06, 0x002d}, {0x05, 0x0004}, +}; + +static u16 mt9v011_init[][2] = { + {0x07, 0x0002}, {0x0d, 0x0001}, {0x0d, 0x0000}, + {0x01, 0x0008}, {0x02, 0x0016}, {0x03, 0x01e1}, + {0x04, 0x0281}, {0x05, 0x0083}, {0x06, 0x0006}, + {0x0d, 0x0002}, {0x0a, 0x0000}, {0x0b, 0x0000}, + {0x0c, 0x0000}, {0x0d, 0x0000}, {0x0e, 0x0000}, + {0x0f, 0x0000}, {0x10, 0x0000}, {0x11, 0x0000}, + {0x12, 0x0000}, {0x13, 0x0000}, {0x14, 0x0000}, + {0x15, 0x0000}, {0x16, 0x0000}, {0x17, 0x0000}, + {0x18, 0x0000}, {0x19, 0x0000}, {0x1a, 0x0000}, + {0x1b, 0x0000}, {0x1c, 0x0000}, {0x1d, 0x0000}, + {0x32, 0x0000}, {0x20, 0x1101}, {0x21, 0x0000}, + {0x22, 0x0000}, {0x23, 0x0000}, {0x24, 0x0000}, + {0x25, 0x0000}, {0x26, 0x0000}, {0x27, 0x0024}, + {0x2f, 0xf7b0}, {0x30, 0x0005}, {0x31, 0x0000}, + {0x32, 0x0000}, {0x33, 0x0000}, {0x34, 0x0100}, + {0x3d, 0x068f}, {0x40, 0x01e0}, {0x41, 0x00d1}, + {0x44, 0x0082}, {0x5a, 0x0000}, {0x5b, 0x0000}, + {0x5c, 0x0000}, {0x5d, 0x0000}, {0x5e, 0x0000}, + {0x5f, 0xa31d}, {0x62, 0x0611}, {0x0a, 0x0000}, + {0x06, 0x0029}, {0x05, 0x0009}, {0x20, 0x1101}, + {0x20, 0x1101}, {0x09, 0x0064}, {0x07, 0x0003}, + {0x2b, 0x0033}, {0x2c, 0x00a0}, {0x2d, 0x00a0}, + {0x2e, 0x0033}, {0x07, 0x0002}, {0x06, 0x0000}, + {0x06, 0x0029}, {0x05, 0x0009}, +}; + +static u16 mt9m001_init[][2] = { + {0x0d, 0x0001}, {0x0d, 0x0000}, {0x01, 0x000e}, + {0x02, 0x0014}, {0x03, 0x03c1}, {0x04, 0x0501}, + {0x05, 0x0083}, {0x06, 0x0006}, {0x0d, 0x0002}, + {0x0a, 0x0000}, {0x0c, 0x0000}, {0x11, 0x0000}, + {0x1e, 0x8000}, {0x5f, 0x8904}, {0x60, 0x0000}, + {0x61, 0x0000}, {0x62, 0x0498}, {0x63, 0x0000}, + {0x64, 0x0000}, {0x20, 0x111d}, {0x06, 0x00f2}, + {0x05, 0x0013}, {0x09, 0x10f2}, {0x07, 0x0003}, + {0x2b, 0x002a}, {0x2d, 0x002a}, {0x2c, 0x002a}, + {0x2e, 0x0029}, {0x07, 0x0002}, +}; + +static u16 mt9m111_init[][2] = { + {0xf0, 0x0000}, {0x0d, 0x0008}, {0x0d, 0x0009}, + {0x0d, 0x0008}, {0xf0, 0x0001}, {0x3a, 0x4300}, + {0x9b, 0x4300}, {0xa1, 0x0280}, {0xa4, 0x0200}, + {0x06, 0x308e}, {0xf0, 0x0000}, +}; + +static u8 hv7131r_init[][2] = { + {0x02, 0x08}, {0x02, 0x00}, {0x01, 0x08}, + {0x02, 0x00}, {0x20, 0x00}, {0x21, 0xd0}, + {0x22, 0x00}, {0x23, 0x09}, {0x01, 0x08}, + {0x01, 0x08}, {0x01, 0x08}, {0x25, 0x07}, + {0x26, 0xc3}, {0x27, 0x50}, {0x30, 0x62}, + {0x31, 0x10}, {0x32, 0x06}, {0x33, 0x10}, + {0x20, 0x00}, {0x21, 0xd0}, {0x22, 0x00}, + {0x23, 0x09}, {0x01, 0x08}, +}; + +int reg_r(struct gspca_dev *gspca_dev, u16 reg, u16 length) +{ + struct usb_device *dev = gspca_dev->dev; + int result; + result = usb_control_msg(dev, usb_rcvctrlpipe(dev, 0), + 0x00, + USB_DIR_IN | USB_TYPE_VENDOR | USB_RECIP_INTERFACE, + reg, + 0x00, + gspca_dev->usb_buf, + length, + 500); + if (unlikely(result < 0 || result != length)) { + err("Read register failed 0x%02X", reg); + return -EIO; + } + return 0; +} + +int reg_w(struct gspca_dev *gspca_dev, u16 reg, const u8 *buffer, int length) +{ + struct usb_device *dev = gspca_dev->dev; + int result; + memcpy(gspca_dev->usb_buf, buffer, length); + result = usb_control_msg(dev, usb_sndctrlpipe(dev, 0), + 0x08, + USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_INTERFACE, + reg, + 0x00, + gspca_dev->usb_buf, + length, + 500); + if (unlikely(result < 0 || result != length)) { + err("Write register failed index 0x%02X", reg); + return -EIO; + } + return 0; +} + +int reg_w1(struct gspca_dev *gspca_dev, u16 reg, const u8 value) +{ + u8 data[1] = {value}; + return reg_w(gspca_dev, reg, data, 1); +} + +int i2c_w(struct gspca_dev *gspca_dev, const u8 *buffer) +{ + int i; + reg_w(gspca_dev, 0x10c0, buffer, 8); + for (i = 0; i < 5; i++) { + reg_r(gspca_dev, 0x10c0, 1); + if (gspca_dev->usb_buf[0] & 0x04) { + if (gspca_dev->usb_buf[0] & 0x08) + return -1; + return 0; + } + msleep(1); + } + return -1; +} + +int i2c_w1(struct gspca_dev *gspca_dev, u8 reg, u8 val) +{ + struct sd *sd = (struct sd *) gspca_dev; + + u8 row[8]; + + /* + * from the point of view of the bridge, the length + * includes the address + */ + row[0] = 0x81 | (2 << 4); + row[1] = sd->i2c_addr; + row[2] = reg; + row[3] = val; + row[4] = 0x00; + row[5] = 0x00; + row[6] = 0x00; + row[7] = 0x10; + + return i2c_w(gspca_dev, row); +} + +int i2c_w2(struct gspca_dev *gspca_dev, u8 reg, u16 val) +{ + struct sd *sd = (struct sd *) gspca_dev; + u8 row[8]; + + /* + * from the point of view of the bridge, the length + * includes the address + */ + row[0] = 0x81 | (3 << 4); + row[1] = sd->i2c_addr; + row[2] = reg; + row[3] = (val >> 8) & 0xff; + row[4] = val & 0xff; + row[5] = 0x00; + row[6] = 0x00; + row[7] = 0x10; + + return i2c_w(gspca_dev, row); +} + +int i2c_r1(struct gspca_dev *gspca_dev, u8 reg, u8 *val) +{ + struct sd *sd = (struct sd *) gspca_dev; + u8 row[8]; + + row[0] = 0x81 | 0x10; + row[1] = sd->i2c_addr; + row[2] = reg; + row[3] = 0; + row[4] = 0; + row[5] = 0; + row[6] = 0; + row[7] = 0x10; + reg_w(gspca_dev, 0x10c0, row, 8); + msleep(1); + row[0] = 0x81 | (2 << 4) | 0x02; + row[2] = 0; + reg_w(gspca_dev, 0x10c0, row, 8); + msleep(1); + reg_r(gspca_dev, 0x10c2, 5); + *val = gspca_dev->usb_buf[3]; + return 0; +} + +int i2c_r2(struct gspca_dev *gspca_dev, u8 reg, u16 *val) +{ + struct sd *sd = (struct sd *) gspca_dev; + u8 row[8]; + + row[0] = 0x81 | 0x10; + row[1] = sd->i2c_addr; + row[2] = reg; + row[3] = 0; + row[4] = 0; + row[5] = 0; + row[6] = 0; + row[7] = 0x10; + reg_w(gspca_dev, 0x10c0, row, 8); + msleep(1); + row[0] = 0x81 | (3 << 4) | 0x02; + row[2] = 0; + reg_w(gspca_dev, 0x10c0, row, 8); + msleep(1); + reg_r(gspca_dev, 0x10c2, 5); + *val = (gspca_dev->usb_buf[2] << 8) | gspca_dev->usb_buf[3]; + return 0; +} + +static int ov9650_init_sensor(struct gspca_dev *gspca_dev) +{ + int i; + struct sd *sd = (struct sd *) gspca_dev; + + for (i = 0; i < ARRAY_SIZE(ov9650_init); i++) { + if (i2c_w1(gspca_dev, ov9650_init[i][0], + ov9650_init[i][1]) < 0) { + err("OV9650 sensor initialization failed"); + return -ENODEV; + } + } + sd->hstart = 1; + sd->vstart = 7; + return 0; +} + +static int ov9655_init_sensor(struct gspca_dev *gspca_dev) +{ + int i; + struct sd *sd = (struct sd *) gspca_dev; + + for (i = 0; i < ARRAY_SIZE(ov9655_init); i++) { + if (i2c_w1(gspca_dev, ov9655_init[i][0], + ov9655_init[i][1]) < 0) { + err("OV9655 sensor initialization failed"); + return -ENODEV; + } + } + /* disable hflip and vflip */ + gspca_dev->ctrl_dis = (1 << HFLIP_IDX) | (1 << VFLIP_IDX); + sd->hstart = 0; + sd->vstart = 7; + return 0; +} + +static int soi968_init_sensor(struct gspca_dev *gspca_dev) +{ + int i; + struct sd *sd = (struct sd *) gspca_dev; + + for (i = 0; i < ARRAY_SIZE(soi968_init); i++) { + if (i2c_w1(gspca_dev, soi968_init[i][0], + soi968_init[i][1]) < 0) { + err("SOI968 sensor initialization failed"); + return -ENODEV; + } + } + /* disable hflip and vflip */ + gspca_dev->ctrl_dis = (1 << HFLIP_IDX) | (1 << VFLIP_IDX); + sd->hstart = 60; + sd->vstart = 11; + return 0; +} + +static int ov7660_init_sensor(struct gspca_dev *gspca_dev) +{ + int i; + struct sd *sd = (struct sd *) gspca_dev; + + for (i = 0; i < ARRAY_SIZE(ov7660_init); i++) { + if (i2c_w1(gspca_dev, ov7660_init[i][0], + ov7660_init[i][1]) < 0) { + err("OV7660 sensor initialization failed"); + return -ENODEV; + } + } + /* disable hflip and vflip */ + gspca_dev->ctrl_dis = (1 << HFLIP_IDX) | (1 << VFLIP_IDX); + sd->hstart = 1; + sd->vstart = 1; + return 0; +} + +static int ov7670_init_sensor(struct gspca_dev *gspca_dev) +{ + int i; + struct sd *sd = (struct sd *) gspca_dev; + + for (i = 0; i < ARRAY_SIZE(ov7670_init); i++) { + if (i2c_w1(gspca_dev, ov7670_init[i][0], + ov7670_init[i][1]) < 0) { + err("OV7670 sensor initialization failed"); + return -ENODEV; + } + } + /* disable hflip and vflip */ + gspca_dev->ctrl_dis = (1 << HFLIP_IDX) | (1 << VFLIP_IDX); + sd->hstart = 0; + sd->vstart = 1; + return 0; +} + +static int mt9v_init_sensor(struct gspca_dev *gspca_dev) +{ + struct sd *sd = (struct sd *) gspca_dev; + int i; + u16 value; + int ret; + + sd->i2c_addr = 0x5d; + ret = i2c_r2(gspca_dev, 0xff, &value); + if ((ret == 0) && (value == 0x8243)) { + for (i = 0; i < ARRAY_SIZE(mt9v011_init); i++) { + if (i2c_w2(gspca_dev, mt9v011_init[i][0], + mt9v011_init[i][1]) < 0) { + err("MT9V011 sensor initialization failed"); + return -ENODEV; + } + } + sd->hstart = 2; + sd->vstart = 2; + sd->sensor = SENSOR_MT9V011; + info("MT9V011 sensor detected"); + return 0; + } + + sd->i2c_addr = 0x5c; + i2c_w2(gspca_dev, 0x01, 0x0004); + ret = i2c_r2(gspca_dev, 0xff, &value); + if ((ret == 0) && (value == 0x823a)) { + for (i = 0; i < ARRAY_SIZE(mt9v111_init); i++) { + if (i2c_w2(gspca_dev, mt9v111_init[i][0], + mt9v111_init[i][1]) < 0) { + err("MT9V111 sensor initialization failed"); + return -ENODEV; + } + } + sd->hstart = 2; + sd->vstart = 2; + sd->sensor = SENSOR_MT9V111; + info("MT9V111 sensor detected"); + return 0; + } + + sd->i2c_addr = 0x5d; + ret = i2c_w2(gspca_dev, 0xf0, 0x0000); + if (ret < 0) { + sd->i2c_addr = 0x48; + i2c_w2(gspca_dev, 0xf0, 0x0000); + } + ret = i2c_r2(gspca_dev, 0x00, &value); + if ((ret == 0) && (value == 0x1229)) { + for (i = 0; i < ARRAY_SIZE(mt9v112_init); i++) { + if (i2c_w2(gspca_dev, mt9v112_init[i][0], + mt9v112_init[i][1]) < 0) { + err("MT9V112 sensor initialization failed"); + return -ENODEV; + } + } + sd->hstart = 6; + sd->vstart = 2; + sd->sensor = SENSOR_MT9V112; + info("MT9V112 sensor detected"); + return 0; + } + + return -ENODEV; +} + +static int mt9m111_init_sensor(struct gspca_dev *gspca_dev) +{ + struct sd *sd = (struct sd *) gspca_dev; + int i; + for (i = 0; i < ARRAY_SIZE(mt9m111_init); i++) { + if (i2c_w2(gspca_dev, mt9m111_init[i][0], + mt9m111_init[i][1]) < 0) { + err("MT9M111 sensor initialization failed"); + return -ENODEV; + } + } + sd->hstart = 0; + sd->vstart = 2; + return 0; +} + +static int mt9m001_init_sensor(struct gspca_dev *gspca_dev) +{ + struct sd *sd = (struct sd *) gspca_dev; + int i; + for (i = 0; i < ARRAY_SIZE(mt9m001_init); i++) { + if (i2c_w2(gspca_dev, mt9m001_init[i][0], + mt9m001_init[i][1]) < 0) { + err("MT9M001 sensor initialization failed"); + return -ENODEV; + } + } + /* disable hflip and vflip */ + gspca_dev->ctrl_dis = (1 << HFLIP_IDX) | (1 << VFLIP_IDX); + sd->hstart = 2; + sd->vstart = 2; + return 0; +} + +static int hv7131r_init_sensor(struct gspca_dev *gspca_dev) +{ + int i; + struct sd *sd = (struct sd *) gspca_dev; + + for (i = 0; i < ARRAY_SIZE(hv7131r_init); i++) { + if (i2c_w1(gspca_dev, hv7131r_init[i][0], + hv7131r_init[i][1]) < 0) { + err("HV7131R Sensor initialization failed"); + return -ENODEV; + } + } + sd->hstart = 0; + sd->vstart = 1; + return 0; +} + +#ifdef CONFIG_USB_GSPCA_SN9C20X_EVDEV +static int input_kthread(void *data) +{ + struct gspca_dev *gspca_dev = (struct gspca_dev *)data; + struct sd *sd = (struct sd *) gspca_dev; + + DECLARE_WAIT_QUEUE_HEAD(wait); + set_freezable(); + for (;;) { + if (kthread_should_stop()) + break; + + if (reg_r(gspca_dev, 0x1005, 1) < 0) + continue; + + input_report_key(sd->input_dev, + KEY_CAMERA, + gspca_dev->usb_buf[0] & sd->input_gpio); + input_sync(sd->input_dev); + + wait_event_freezable_timeout(wait, + kthread_should_stop(), + msecs_to_jiffies(100)); + } + return 0; +} + + +static int sn9c20x_input_init(struct gspca_dev *gspca_dev) +{ + struct sd *sd = (struct sd *) gspca_dev; + if (sd->input_gpio == 0) + return 0; + + sd->input_dev = input_allocate_device(); + if (!sd->input_dev) + return -ENOMEM; + + sd->input_dev->name = "SN9C20X Webcam"; + + sd->input_dev->phys = kasprintf(GFP_KERNEL, "usb-%s-%s", + gspca_dev->dev->bus->bus_name, + gspca_dev->dev->devpath); + + if (!sd->input_dev->phys) + return -ENOMEM; + + usb_to_input_id(gspca_dev->dev, &sd->input_dev->id); + sd->input_dev->dev.parent = &gspca_dev->dev->dev; + + set_bit(EV_KEY, sd->input_dev->evbit); + set_bit(KEY_CAMERA, sd->input_dev->keybit); + + if (input_register_device(sd->input_dev)) + return -EINVAL; + + sd->input_task = kthread_run(input_kthread, gspca_dev, "sn9c20x/%d", + gspca_dev->vdev.minor); + + if (IS_ERR(sd->input_task)) + return -EINVAL; + + return 0; +} + +static void sn9c20x_input_cleanup(struct gspca_dev *gspca_dev) +{ + struct sd *sd = (struct sd *) gspca_dev; + if (sd->input_task != NULL && !IS_ERR(sd->input_task)) + kthread_stop(sd->input_task); + + if (sd->input_dev != NULL) { + input_unregister_device(sd->input_dev); + kfree(sd->input_dev->phys); + input_free_device(sd->input_dev); + sd->input_dev = NULL; + } +} +#endif + +static int set_cmatrix(struct gspca_dev *gspca_dev) +{ + struct sd *sd = (struct sd *) gspca_dev; + s32 hue_coord, hue_index = 180 + sd->hue; + u8 cmatrix[21]; + memset(cmatrix, 0, 21); + + cmatrix[2] = (sd->contrast * 0x25 / 0x100) + 0x26; + cmatrix[0] = 0x13 + (cmatrix[2] - 0x26) * 0x13 / 0x25; + cmatrix[4] = 0x07 + (cmatrix[2] - 0x26) * 0x07 / 0x25; + cmatrix[18] = sd->brightness - 0x80; + + hue_coord = (hsv_red_x[hue_index] * sd->saturation) >> 8; + cmatrix[6] = (unsigned char)(hue_coord & 0xff); + cmatrix[7] = (unsigned char)((hue_coord >> 8) & 0x0f); + + hue_coord = (hsv_red_y[hue_index] * sd->saturation) >> 8; + cmatrix[8] = (unsigned char)(hue_coord & 0xff); + cmatrix[9] = (unsigned char)((hue_coord >> 8) & 0x0f); + + hue_coord = (hsv_green_x[hue_index] * sd->saturation) >> 8; + cmatrix[10] = (unsigned char)(hue_coord & 0xff); + cmatrix[11] = (unsigned char)((hue_coord >> 8) & 0x0f); + + hue_coord = (hsv_green_y[hue_index] * sd->saturation) >> 8; + cmatrix[12] = (unsigned char)(hue_coord & 0xff); + cmatrix[13] = (unsigned char)((hue_coord >> 8) & 0x0f); + + hue_coord = (hsv_blue_x[hue_index] * sd->saturation) >> 8; + cmatrix[14] = (unsigned char)(hue_coord & 0xff); + cmatrix[15] = (unsigned char)((hue_coord >> 8) & 0x0f); + + hue_coord = (hsv_blue_y[hue_index] * sd->saturation) >> 8; + cmatrix[16] = (unsigned char)(hue_coord & 0xff); + cmatrix[17] = (unsigned char)((hue_coord >> 8) & 0x0f); + + return reg_w(gspca_dev, 0x10e1, cmatrix, 21); +} + +static int set_gamma(struct gspca_dev *gspca_dev) +{ + struct sd *sd = (struct sd *) gspca_dev; + u8 gamma[17]; + u8 gval = sd->gamma * 0xb8 / 0x100; + + + gamma[0] = 0x0a; + gamma[1] = 0x13 + (gval * (0xcb - 0x13) / 0xb8); + gamma[2] = 0x25 + (gval * (0xee - 0x25) / 0xb8); + gamma[3] = 0x37 + (gval * (0xfa - 0x37) / 0xb8); + gamma[4] = 0x45 + (gval * (0xfc - 0x45) / 0xb8); + gamma[5] = 0x55 + (gval * (0xfb - 0x55) / 0xb8); + gamma[6] = 0x65 + (gval * (0xfc - 0x65) / 0xb8); + gamma[7] = 0x74 + (gval * (0xfd - 0x74) / 0xb8); + gamma[8] = 0x83 + (gval * (0xfe - 0x83) / 0xb8); + gamma[9] = 0x92 + (gval * (0xfc - 0x92) / 0xb8); + gamma[10] = 0xa1 + (gval * (0xfc - 0xa1) / 0xb8); + gamma[11] = 0xb0 + (gval * (0xfc - 0xb0) / 0xb8); + gamma[12] = 0xbf + (gval * (0xfb - 0xbf) / 0xb8); + gamma[13] = 0xce + (gval * (0xfb - 0xce) / 0xb8); + gamma[14] = 0xdf + (gval * (0xfd - 0xdf) / 0xb8); + gamma[15] = 0xea + (gval * (0xf9 - 0xea) / 0xb8); + gamma[16] = 0xf5; + + return reg_w(gspca_dev, 0x1190, gamma, 17); +} + +static int set_redblue(struct gspca_dev *gspca_dev) +{ + struct sd *sd = (struct sd *) gspca_dev; + reg_w1(gspca_dev, 0x118c, sd->red); + reg_w1(gspca_dev, 0x118f, sd->blue); + return 0; +} + +static int set_hvflip(struct gspca_dev *gspca_dev) +{ + u8 value, tslb; + u16 value2; + struct sd *sd = (struct sd *) gspca_dev; + switch (sd->sensor) { + case SENSOR_OV9650: + i2c_r1(gspca_dev, 0x1e, &value); + value &= ~0x30; + tslb = 0x01; + if (sd->hflip) + value |= 0x20; + if (sd->vflip) { + value |= 0x10; + tslb = 0x49; + } + i2c_w1(gspca_dev, 0x1e, value); + i2c_w1(gspca_dev, 0x3a, tslb); + break; + case SENSOR_MT9V111: + case SENSOR_MT9V011: + i2c_r2(gspca_dev, 0x20, &value2); + value2 &= ~0xc0a0; + if (sd->hflip) + value2 |= 0x8080; + if (sd->vflip) + value2 |= 0x4020; + i2c_w2(gspca_dev, 0x20, value2); + break; + case SENSOR_MT9M111: + case SENSOR_MT9V112: + i2c_r2(gspca_dev, 0x20, &value2); + value2 &= ~0x0003; + if (sd->hflip) + value2 |= 0x0002; + if (sd->vflip) + value2 |= 0x0001; + i2c_w2(gspca_dev, 0x20, value2); + break; + case SENSOR_HV7131R: + i2c_r1(gspca_dev, 0x01, &value); + value &= ~0x03; + if (sd->vflip) + value |= 0x01; + if (sd->hflip) + value |= 0x02; + i2c_w1(gspca_dev, 0x01, value); + break; + } + return 0; +} + +static int set_exposure(struct gspca_dev *gspca_dev) +{ + struct sd *sd = (struct sd *) gspca_dev; + u8 exp[8] = {0x81, sd->i2c_addr, 0x00, 0x00, 0x00, 0x00, 0x00, 0x1e}; + switch (sd->sensor) { + case SENSOR_OV7660: + case SENSOR_OV7670: + case SENSOR_SOI968: + case SENSOR_OV9655: + case SENSOR_OV9650: + exp[0] |= (3 << 4); + exp[2] = 0x2d; + exp[3] = sd->exposure & 0xff; + exp[4] = sd->exposure >> 8; + break; + case SENSOR_MT9M001: + case SENSOR_MT9M111: + case SENSOR_MT9V112: + case SENSOR_MT9V111: + case SENSOR_MT9V011: + exp[0] |= (3 << 4); + exp[2] = 0x09; + exp[3] = sd->exposure >> 8; + exp[4] = sd->exposure & 0xff; + break; + case SENSOR_HV7131R: + exp[0] |= (4 << 4); + exp[2] = 0x25; + exp[3] = ((sd->exposure * 0xffffff) / 0xffff) >> 16; + exp[4] = ((sd->exposure * 0xffffff) / 0xffff) >> 8; + exp[5] = ((sd->exposure * 0xffffff) / 0xffff) & 0xff; + break; + } + i2c_w(gspca_dev, exp); + return 0; +} + +static int set_gain(struct gspca_dev *gspca_dev) +{ + struct sd *sd = (struct sd *) gspca_dev; + u8 gain[8] = {0x81, sd->i2c_addr, 0x00, 0x00, 0x00, 0x00, 0x00, 0x1d}; + switch (sd->sensor) { + case SENSOR_OV7660: + case SENSOR_OV7670: + case SENSOR_SOI968: + case SENSOR_OV9655: + case SENSOR_OV9650: + gain[0] |= (2 << 4); + gain[3] = ov_gain[sd->gain]; + break; + case SENSOR_MT9V011: + case SENSOR_MT9V111: + gain[0] |= (3 << 4); + gain[2] = 0x35; + gain[3] = micron1_gain[sd->gain] >> 8; + gain[4] = micron1_gain[sd->gain] & 0xff; + break; + case SENSOR_MT9V112: + case SENSOR_MT9M111: + gain[0] |= (3 << 4); + gain[2] = 0x2f; + gain[3] = micron1_gain[sd->gain] >> 8; + gain[4] = micron1_gain[sd->gain] & 0xff; + break; + case SENSOR_MT9M001: + gain[0] |= (3 << 4); + gain[2] = 0x2f; + gain[3] = micron2_gain[sd->gain] >> 8; + gain[4] = micron2_gain[sd->gain] & 0xff; + break; + case SENSOR_HV7131R: + gain[0] |= (2 << 4); + gain[2] = 0x30; + gain[3] = hv7131r_gain[sd->gain]; + break; + } + i2c_w(gspca_dev, gain); + return 0; +} + +static int sd_setbrightness(struct gspca_dev *gspca_dev, s32 val) +{ + struct sd *sd = (struct sd *) gspca_dev; + + sd->brightness = val; + if (gspca_dev->streaming) + return set_cmatrix(gspca_dev); + return 0; +} + +static int sd_getbrightness(struct gspca_dev *gspca_dev, s32 *val) +{ + struct sd *sd = (struct sd *) gspca_dev; + *val = sd->brightness; + return 0; +} + + +static int sd_setcontrast(struct gspca_dev *gspca_dev, s32 val) +{ + struct sd *sd = (struct sd *) gspca_dev; + + sd->contrast = val; + if (gspca_dev->streaming) + return set_cmatrix(gspca_dev); + return 0; +} + +static int sd_getcontrast(struct gspca_dev *gspca_dev, s32 *val) +{ + struct sd *sd = (struct sd *) gspca_dev; + *val = sd->contrast; + return 0; +} + +static int sd_setsaturation(struct gspca_dev *gspca_dev, s32 val) +{ + struct sd *sd = (struct sd *) gspca_dev; + + sd->saturation = val; + if (gspca_dev->streaming) + return set_cmatrix(gspca_dev); + return 0; +} + +static int sd_getsaturation(struct gspca_dev *gspca_dev, s32 *val) +{ + struct sd *sd = (struct sd *) gspca_dev; + *val = sd->saturation; + return 0; +} + +static int sd_sethue(struct gspca_dev *gspca_dev, s32 val) +{ + struct sd *sd = (struct sd *) gspca_dev; + + sd->hue = val; + if (gspca_dev->streaming) + return set_cmatrix(gspca_dev); + return 0; +} + +static int sd_gethue(struct gspca_dev *gspca_dev, s32 *val) +{ + struct sd *sd = (struct sd *) gspca_dev; + *val = sd->hue; + return 0; +} + +static int sd_setgamma(struct gspca_dev *gspca_dev, s32 val) +{ + struct sd *sd = (struct sd *) gspca_dev; + + sd->gamma = val; + if (gspca_dev->streaming) + return set_gamma(gspca_dev); + return 0; +} + +static int sd_getgamma(struct gspca_dev *gspca_dev, s32 *val) +{ + struct sd *sd = (struct sd *) gspca_dev; + *val = sd->gamma; + return 0; +} + +static int sd_setredbalance(struct gspca_dev *gspca_dev, s32 val) +{ + struct sd *sd = (struct sd *) gspca_dev; + + sd->red = val; + if (gspca_dev->streaming) + return set_redblue(gspca_dev); + return 0; +} + +static int sd_getredbalance(struct gspca_dev *gspca_dev, s32 *val) +{ + struct sd *sd = (struct sd *) gspca_dev; + *val = sd->red; + return 0; +} + +static int sd_setbluebalance(struct gspca_dev *gspca_dev, s32 val) +{ + struct sd *sd = (struct sd *) gspca_dev; + + sd->blue = val; + if (gspca_dev->streaming) + return set_redblue(gspca_dev); + return 0; +} + +static int sd_getbluebalance(struct gspca_dev *gspca_dev, s32 *val) +{ + struct sd *sd = (struct sd *) gspca_dev; + *val = sd->blue; + return 0; +} + +static int sd_sethflip(struct gspca_dev *gspca_dev, s32 val) +{ + struct sd *sd = (struct sd *) gspca_dev; + + sd->hflip = val; + if (gspca_dev->streaming) + return set_hvflip(gspca_dev); + return 0; +} + +static int sd_gethflip(struct gspca_dev *gspca_dev, s32 *val) +{ + struct sd *sd = (struct sd *) gspca_dev; + *val = sd->hflip; + return 0; +} + +static int sd_setvflip(struct gspca_dev *gspca_dev, s32 val) +{ + struct sd *sd = (struct sd *) gspca_dev; + + sd->vflip = val; + if (gspca_dev->streaming) + return set_hvflip(gspca_dev); + return 0; +} + +static int sd_getvflip(struct gspca_dev *gspca_dev, s32 *val) +{ + struct sd *sd = (struct sd *) gspca_dev; + *val = sd->vflip; + return 0; +} + +static int sd_setexposure(struct gspca_dev *gspca_dev, s32 val) +{ + struct sd *sd = (struct sd *) gspca_dev; + + sd->exposure = val; + if (gspca_dev->streaming) + return set_exposure(gspca_dev); + return 0; +} + +static int sd_getexposure(struct gspca_dev *gspca_dev, s32 *val) +{ + struct sd *sd = (struct sd *) gspca_dev; + *val = sd->exposure; + return 0; +} + +static int sd_setgain(struct gspca_dev *gspca_dev, s32 val) +{ + struct sd *sd = (struct sd *) gspca_dev; + + sd->gain = val; + if (gspca_dev->streaming) + return set_gain(gspca_dev); + return 0; +} + +static int sd_getgain(struct gspca_dev *gspca_dev, s32 *val) +{ + struct sd *sd = (struct sd *) gspca_dev; + *val = sd->gain; + return 0; +} + +static int sd_setautoexposure(struct gspca_dev *gspca_dev, s32 val) +{ + struct sd *sd = (struct sd *) gspca_dev; + sd->auto_exposure = val; + return 0; +} + +static int sd_getautoexposure(struct gspca_dev *gspca_dev, s32 *val) +{ + struct sd *sd = (struct sd *) gspca_dev; + *val = sd->auto_exposure; + return 0; +} + +#ifdef CONFIG_VIDEO_ADV_DEBUG +static int sd_dbg_g_register(struct gspca_dev *gspca_dev, + struct v4l2_dbg_register *reg) +{ + struct sd *sd = (struct sd *) gspca_dev; + switch (reg->match.type) { + case V4L2_CHIP_MATCH_HOST: + if (reg->match.addr != 0) + return -EINVAL; + if (reg->reg < 0x1000 || reg->reg > 0x11ff) + return -EINVAL; + if (reg_r(gspca_dev, reg->reg, 1) < 0) + return -EINVAL; + reg->val = gspca_dev->usb_buf[0]; + return 0; + case V4L2_CHIP_MATCH_I2C_ADDR: + if (reg->match.addr != sd->i2c_addr) + return -EINVAL; + if (sd->sensor >= SENSOR_MT9V011 && + sd->sensor <= SENSOR_MT9M111) { + if (i2c_r2(gspca_dev, reg->reg, (u16 *)®->val) < 0) + return -EINVAL; + } else { + if (i2c_r1(gspca_dev, reg->reg, (u8 *)®->val) < 0) + return -EINVAL; + } + return 0; + } + return -EINVAL; +} + +static int sd_dbg_s_register(struct gspca_dev *gspca_dev, + struct v4l2_dbg_register *reg) +{ + struct sd *sd = (struct sd *) gspca_dev; + switch (reg->match.type) { + case V4L2_CHIP_MATCH_HOST: + if (reg->match.addr != 0) + return -EINVAL; + if (reg->reg < 0x1000 || reg->reg > 0x11ff) + return -EINVAL; + if (reg_w1(gspca_dev, reg->reg, reg->val) < 0) + return -EINVAL; + return 0; + case V4L2_CHIP_MATCH_I2C_ADDR: + if (reg->match.addr != sd->i2c_addr) + return -EINVAL; + if (sd->sensor >= SENSOR_MT9V011 && + sd->sensor <= SENSOR_MT9M111) { + if (i2c_w2(gspca_dev, reg->reg, reg->val) < 0) + return -EINVAL; + } else { + if (i2c_w1(gspca_dev, reg->reg, reg->val) < 0) + return -EINVAL; + } + return 0; + } + return -EINVAL; +} +#endif + +static int sd_chip_ident(struct gspca_dev *gspca_dev, + struct v4l2_dbg_chip_ident *chip) +{ + struct sd *sd = (struct sd *) gspca_dev; + + switch (chip->match.type) { + case V4L2_CHIP_MATCH_HOST: + if (chip->match.addr != 0) + return -EINVAL; + chip->revision = 0; + chip->ident = V4L2_IDENT_SN9C20X; + return 0; + case V4L2_CHIP_MATCH_I2C_ADDR: + if (chip->match.addr != sd->i2c_addr) + return -EINVAL; + chip->revision = 0; + chip->ident = i2c_ident[sd->sensor]; + return 0; + } + return -EINVAL; +} + +static int sd_config(struct gspca_dev *gspca_dev, + const struct usb_device_id *id) +{ + struct sd *sd = (struct sd *) gspca_dev; + struct cam *cam; + + cam = &gspca_dev->cam; + + sd->sensor = (id->driver_info >> 8) & 0xff; + sd->i2c_addr = id->driver_info & 0xff; + + switch (sd->sensor) { + case SENSOR_OV9650: + cam->cam_mode = sxga_mode; + cam->nmodes = ARRAY_SIZE(sxga_mode); + break; + default: + cam->cam_mode = vga_mode; + cam->nmodes = ARRAY_SIZE(vga_mode); + } + + sd->old_step = 0; + sd->older_step = 0; + sd->exposure_step = 16; + + sd->brightness = BRIGHTNESS_DEFAULT; + sd->contrast = CONTRAST_DEFAULT; + sd->saturation = SATURATION_DEFAULT; + sd->hue = HUE_DEFAULT; + sd->gamma = GAMMA_DEFAULT; + sd->red = RED_DEFAULT; + sd->blue = BLUE_DEFAULT; + + sd->hflip = HFLIP_DEFAULT; + sd->vflip = VFLIP_DEFAULT; + sd->exposure = EXPOSURE_DEFAULT; + sd->gain = GAIN_DEFAULT; + sd->auto_exposure = AUTO_EXPOSURE_DEFAULT; + + sd->quality = 95; + +#ifdef CONFIG_USB_GSPCA_SN9C20X_EVDEV + sd->input_gpio = (id->driver_info >> 16) & 0xff; + if (sn9c20x_input_init(gspca_dev) < 0) + return -ENODEV; +#endif + return 0; +} + +static int sd_init(struct gspca_dev *gspca_dev) +{ + struct sd *sd = (struct sd *) gspca_dev; + int i; + u8 value; + u8 i2c_init[9] = + {0x80, sd->i2c_addr, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x03}; + + for (i = 0; i < ARRAY_SIZE(bridge_init); i++) { + value = bridge_init[i][1]; + if (reg_w(gspca_dev, bridge_init[i][0], &value, 1) < 0) { + err("Device initialization failed"); + return -ENODEV; + } + } + + if (reg_w(gspca_dev, 0x10c0, i2c_init, 9) < 0) { + err("Device initialization failed"); + return -ENODEV; + } + + switch (sd->sensor) { + case SENSOR_OV9650: + if (ov9650_init_sensor(gspca_dev) < 0) + return -ENODEV; + info("OV9650 sensor detected"); + break; + case SENSOR_OV9655: + if (ov9655_init_sensor(gspca_dev) < 0) + return -ENODEV; + info("OV9655 sensor detected"); + break; + case SENSOR_SOI968: + if (soi968_init_sensor(gspca_dev) < 0) + return -ENODEV; + info("SOI968 sensor detected"); + break; + case SENSOR_OV7660: + if (ov7660_init_sensor(gspca_dev) < 0) + return -ENODEV; + info("OV7660 sensor detected"); + break; + case SENSOR_OV7670: + if (ov7670_init_sensor(gspca_dev) < 0) + return -ENODEV; + info("OV7670 sensor detected"); + break; + case SENSOR_MT9VPRB: + if (mt9v_init_sensor(gspca_dev) < 0) + return -ENODEV; + break; + case SENSOR_MT9M111: + if (mt9m111_init_sensor(gspca_dev) < 0) + return -ENODEV; + info("MT9M111 sensor detected"); + break; + case SENSOR_MT9M001: + if (mt9m001_init_sensor(gspca_dev) < 0) + return -ENODEV; + info("MT9M001 sensor detected"); + break; + case SENSOR_HV7131R: + if (hv7131r_init_sensor(gspca_dev) < 0) + return -ENODEV; + info("HV7131R sensor detected"); + break; + default: + info("Unsupported Sensor"); + return -ENODEV; + } + + return 0; +} + +static void configure_sensor_output(struct gspca_dev *gspca_dev, int mode) +{ + struct sd *sd = (struct sd *) gspca_dev; + u8 value; + switch (sd->sensor) { + case SENSOR_OV9650: + if (mode & MODE_SXGA) { + i2c_w1(gspca_dev, 0x17, 0x1b); + i2c_w1(gspca_dev, 0x18, 0xbc); + i2c_w1(gspca_dev, 0x19, 0x01); + i2c_w1(gspca_dev, 0x1a, 0x82); + i2c_r1(gspca_dev, 0x12, &value); + i2c_w1(gspca_dev, 0x12, value & 0x07); + } else { + i2c_w1(gspca_dev, 0x17, 0x24); + i2c_w1(gspca_dev, 0x18, 0xc5); + i2c_w1(gspca_dev, 0x19, 0x00); + i2c_w1(gspca_dev, 0x1a, 0x3c); + i2c_r1(gspca_dev, 0x12, &value); + i2c_w1(gspca_dev, 0x12, (value & 0x7) | 0x40); + } + break; + } +} + +#define HW_WIN(mode, hstart, vstart) \ +((const u8 []){hstart & 0xff, hstart >> 8, \ +vstart & 0xff, vstart >> 8, \ +(mode & MODE_SXGA ? 1280 >> 4 : 640 >> 4), \ +(mode & MODE_SXGA ? 1024 >> 3 : 480 >> 3)}) + +#define CLR_WIN(width, height) \ +((const u8 [])\ +{0, width >> 2, 0, height >> 1,\ +((width >> 10) & 0x01) | ((height >> 8) & 0x6)}) + +static int sd_start(struct gspca_dev *gspca_dev) +{ + struct sd *sd = (struct sd *) gspca_dev; + int mode = gspca_dev->cam.cam_mode[(int) gspca_dev->curr_mode].priv; + int width = gspca_dev->width; + int height = gspca_dev->height; + u8 fmt, scale = 0; + + sd->jpeg_hdr = kmalloc(JPEG_HDR_SZ, GFP_KERNEL); + if (sd->jpeg_hdr == NULL) + return -ENOMEM; + + jpeg_define(sd->jpeg_hdr, height, width, + 0x21); + jpeg_set_qual(sd->jpeg_hdr, sd->quality); + + if (mode & MODE_RAW) + fmt = 0x2d; + else if (mode & MODE_JPEG) + fmt = 0x2c; + else + fmt = 0x2f; + + switch (mode & 0x0f) { + case 3: + scale = 0xc0; + info("Set 1280x1024"); + break; + case 2: + scale = 0x80; + info("Set 640x480"); + break; + case 1: + scale = 0x90; + info("Set 320x240"); + break; + case 0: + scale = 0xa0; + info("Set 160x120"); + break; + } + + configure_sensor_output(gspca_dev, mode); + reg_w(gspca_dev, 0x1100, sd->jpeg_hdr + JPEG_QT0_OFFSET, 64); + reg_w(gspca_dev, 0x1140, sd->jpeg_hdr + JPEG_QT1_OFFSET, 64); + reg_w(gspca_dev, 0x10fb, CLR_WIN(width, height), 5); + reg_w(gspca_dev, 0x1180, HW_WIN(mode, sd->hstart, sd->vstart), 6); + reg_w1(gspca_dev, 0x1189, scale); + reg_w1(gspca_dev, 0x10e0, fmt); + + set_cmatrix(gspca_dev); + set_gamma(gspca_dev); + set_redblue(gspca_dev); + set_gain(gspca_dev); + set_exposure(gspca_dev); + set_hvflip(gspca_dev); + + reg_r(gspca_dev, 0x1061, 1); + reg_w1(gspca_dev, 0x1061, gspca_dev->usb_buf[0] | 0x02); + return 0; +} + +static void sd_stopN(struct gspca_dev *gspca_dev) +{ + reg_r(gspca_dev, 0x1061, 1); + reg_w1(gspca_dev, 0x1061, gspca_dev->usb_buf[0] & ~0x02); +} + +static void sd_stop0(struct gspca_dev *gspca_dev) +{ + struct sd *sd = (struct sd *) gspca_dev; + kfree(sd->jpeg_hdr); +} + +static void do_autoexposure(struct gspca_dev *gspca_dev) +{ + struct sd *sd = (struct sd *) gspca_dev; + int avg_lum, new_exp; + + if (!sd->auto_exposure) + return; + + avg_lum = atomic_read(&sd->avg_lum); + + /* + * some hardcoded values are present + * like those for maximal/minimal exposure + * and exposure steps + */ + if (avg_lum < MIN_AVG_LUM) { + if (sd->exposure > 0x1770) + return; + + new_exp = sd->exposure + sd->exposure_step; + if (new_exp > 0x1770) + new_exp = 0x1770; + if (new_exp < 0x10) + new_exp = 0x10; + sd->exposure = new_exp; + set_exposure(gspca_dev); + + sd->older_step = sd->old_step; + sd->old_step = 1; + + if (sd->old_step ^ sd->older_step) + sd->exposure_step /= 2; + else + sd->exposure_step += 2; + } + if (avg_lum > MAX_AVG_LUM) { + if (sd->exposure < 0x10) + return; + new_exp = sd->exposure - sd->exposure_step; + if (new_exp > 0x1700) + new_exp = 0x1770; + if (new_exp < 0x10) + new_exp = 0x10; + sd->exposure = new_exp; + set_exposure(gspca_dev); + sd->older_step = sd->old_step; + sd->old_step = 0; + + if (sd->old_step ^ sd->older_step) + sd->exposure_step /= 2; + else + sd->exposure_step += 2; + } +} + +static void sd_pkt_scan(struct gspca_dev *gspca_dev, + struct gspca_frame *frame, /* target */ + u8 *data, /* isoc packet */ + int len) /* iso packet length */ +{ + struct sd *sd = (struct sd *) gspca_dev; + int avg_lum; + static unsigned char frame_header[] = + {0xff, 0xff, 0x00, 0xc4, 0xc4, 0x96}; + if (len == 64 && memcmp(data, frame_header, 6) == 0) { + avg_lum = ((data[35] >> 2) & 3) | + (data[20] << 2) | + (data[19] << 10); + avg_lum += ((data[35] >> 4) & 3) | + (data[22] << 2) | + (data[21] << 10); + avg_lum += ((data[35] >> 6) & 3) | + (data[24] << 2) | + (data[23] << 10); + avg_lum += (data[36] & 3) | + (data[26] << 2) | + (data[25] << 10); + avg_lum += ((data[36] >> 2) & 3) | + (data[28] << 2) | + (data[27] << 10); + avg_lum += ((data[36] >> 4) & 3) | + (data[30] << 2) | + (data[29] << 10); + avg_lum += ((data[36] >> 6) & 3) | + (data[32] << 2) | + (data[31] << 10); + avg_lum += ((data[44] >> 4) & 3) | + (data[34] << 2) | + (data[33] << 10); + avg_lum >>= 9; + atomic_set(&sd->avg_lum, avg_lum); + gspca_frame_add(gspca_dev, LAST_PACKET, + frame, data, len); + return; + } + if (gspca_dev->last_packet_type == LAST_PACKET) { + if (gspca_dev->cam.cam_mode[(int) gspca_dev->curr_mode].priv + & MODE_JPEG) { + gspca_frame_add(gspca_dev, FIRST_PACKET, frame, + sd->jpeg_hdr, JPEG_HDR_SZ); + gspca_frame_add(gspca_dev, INTER_PACKET, frame, + data, len); + } else { + gspca_frame_add(gspca_dev, FIRST_PACKET, frame, + data, len); + } + } else { + gspca_frame_add(gspca_dev, INTER_PACKET, frame, data, len); + } +} + +/* sub-driver description */ +static const struct sd_desc sd_desc = { + .name = MODULE_NAME, + .ctrls = sd_ctrls, + .nctrls = ARRAY_SIZE(sd_ctrls), + .config = sd_config, + .init = sd_init, + .start = sd_start, + .stopN = sd_stopN, + .stop0 = sd_stop0, + .pkt_scan = sd_pkt_scan, + .dq_callback = do_autoexposure, +#ifdef CONFIG_VIDEO_ADV_DEBUG + .set_register = sd_dbg_s_register, + .get_register = sd_dbg_g_register, +#endif + .get_chip_ident = sd_chip_ident, +}; + +#define SN9C20X(sensor, i2c_addr, button_mask) \ + .driver_info = (button_mask << 16) \ + | (SENSOR_ ## sensor << 8) \ + | (i2c_addr) + +static const __devinitdata struct usb_device_id device_table[] = { + {USB_DEVICE(0x0c45, 0x6240), SN9C20X(MT9M001, 0x5d, 0)}, + {USB_DEVICE(0x0c45, 0x6242), SN9C20X(MT9M111, 0x5d, 0)}, + {USB_DEVICE(0x0c45, 0x6248), SN9C20X(OV9655, 0x30, 0)}, + {USB_DEVICE(0x0c45, 0x624e), SN9C20X(SOI968, 0x30, 0x10)}, + {USB_DEVICE(0x0c45, 0x624f), SN9C20X(OV9650, 0x30, 0)}, + {USB_DEVICE(0x0c45, 0x6251), SN9C20X(OV9650, 0x30, 0)}, + {USB_DEVICE(0x0c45, 0x6253), SN9C20X(OV9650, 0x30, 0)}, + {USB_DEVICE(0x0c45, 0x6260), SN9C20X(OV7670, 0x21, 0)}, + {USB_DEVICE(0x0c45, 0x6270), SN9C20X(MT9VPRB, 0x00, 0)}, + {USB_DEVICE(0x0c45, 0x627b), SN9C20X(OV7660, 0x21, 0)}, + {USB_DEVICE(0x0c45, 0x627c), SN9C20X(HV7131R, 0x11, 0)}, + {USB_DEVICE(0x0c45, 0x627f), SN9C20X(OV9650, 0x30, 0)}, + {USB_DEVICE(0x0c45, 0x6280), SN9C20X(MT9M001, 0x5d, 0)}, + {USB_DEVICE(0x0c45, 0x6282), SN9C20X(MT9M111, 0x5d, 0)}, + {USB_DEVICE(0x0c45, 0x6288), SN9C20X(OV9655, 0x30, 0)}, + {USB_DEVICE(0x0c45, 0x628e), SN9C20X(SOI968, 0x30, 0)}, + {USB_DEVICE(0x0c45, 0x628f), SN9C20X(OV9650, 0x30, 0)}, + {USB_DEVICE(0x0c45, 0x62a0), SN9C20X(OV7670, 0x21, 0)}, + {USB_DEVICE(0x0c45, 0x62b0), SN9C20X(MT9VPRB, 0x00, 0)}, + {USB_DEVICE(0x0c45, 0x62b3), SN9C20X(OV9655, 0x30, 0)}, + {USB_DEVICE(0x0c45, 0x62bb), SN9C20X(OV7660, 0x21, 0)}, + {USB_DEVICE(0x0c45, 0x62bc), SN9C20X(HV7131R, 0x11, 0)}, + {USB_DEVICE(0x045e, 0x00f4), SN9C20X(OV9650, 0x30, 0)}, + {USB_DEVICE(0x145f, 0x013d), SN9C20X(OV7660, 0x21, 0)}, + {USB_DEVICE(0x0458, 0x7029), SN9C20X(HV7131R, 0x11, 0)}, + {USB_DEVICE(0xa168, 0x0610), SN9C20X(HV7131R, 0x11, 0)}, + {USB_DEVICE(0xa168, 0x0611), SN9C20X(HV7131R, 0x11, 0)}, + {USB_DEVICE(0xa168, 0x0613), SN9C20X(HV7131R, 0x11, 0)}, + {USB_DEVICE(0xa168, 0x0618), SN9C20X(HV7131R, 0x11, 0)}, + {USB_DEVICE(0xa168, 0x0614), SN9C20X(MT9M111, 0x5d, 0)}, + {USB_DEVICE(0xa168, 0x0615), SN9C20X(MT9M111, 0x5d, 0)}, + {USB_DEVICE(0xa168, 0x0617), SN9C20X(MT9M111, 0x5d, 0)}, + {} +}; +MODULE_DEVICE_TABLE(usb, device_table); + +/* -- device connect -- */ +static int sd_probe(struct usb_interface *intf, + const struct usb_device_id *id) +{ + return gspca_dev_probe(intf, id, &sd_desc, sizeof(struct sd), + THIS_MODULE); +} + +static void sd_disconnect(struct usb_interface *intf) +{ +#ifdef CONFIG_USB_GSPCA_SN9C20X_EVDEV + struct gspca_dev *gspca_dev = usb_get_intfdata(intf); + + sn9c20x_input_cleanup(gspca_dev); +#endif + + gspca_disconnect(intf); +} + +static struct usb_driver sd_driver = { + .name = MODULE_NAME, + .id_table = device_table, + .probe = sd_probe, + .disconnect = sd_disconnect, +#ifdef CONFIG_PM + .suspend = gspca_suspend, + .resume = gspca_resume, + .reset_resume = gspca_resume, +#endif +}; + +/* -- module insert / remove -- */ +static int __init sd_mod_init(void) +{ + int ret; + ret = usb_register(&sd_driver); + if (ret < 0) + return ret; + info("registered"); + return 0; +} +static void __exit sd_mod_exit(void) +{ + usb_deregister(&sd_driver); + info("deregistered"); +} + +module_init(sd_mod_init); +module_exit(sd_mod_exit); diff --git a/include/linux/videodev2.h b/include/linux/videodev2.h index 95846d98801..74f16876f38 100644 --- a/include/linux/videodev2.h +++ b/include/linux/videodev2.h @@ -338,6 +338,7 @@ struct v4l2_pix_format { /* Vendor-specific formats */ #define V4L2_PIX_FMT_WNVA v4l2_fourcc('W', 'N', 'V', 'A') /* Winnov hw compress */ #define V4L2_PIX_FMT_SN9C10X v4l2_fourcc('S', '9', '1', '0') /* SN9C10x compression */ +#define V4L2_PIX_FMT_SN9C20X_I420 v4l2_fourcc('S', '9', '2', '0') /* SN9C20x YUV 4:2:0 */ #define V4L2_PIX_FMT_PWC1 v4l2_fourcc('P', 'W', 'C', '1') /* pwc older webcam */ #define V4L2_PIX_FMT_PWC2 v4l2_fourcc('P', 'W', 'C', '2') /* pwc newer webcam */ #define V4L2_PIX_FMT_ET61X251 v4l2_fourcc('E', '6', '2', '5') /* ET61X251 compression */ diff --git a/include/media/v4l2-chip-ident.h b/include/media/v4l2-chip-ident.h index 11a4a2d3e36..94e908c0d7a 100644 --- a/include/media/v4l2-chip-ident.h +++ b/include/media/v4l2-chip-ident.h @@ -60,6 +60,10 @@ enum { V4L2_IDENT_OV7670 = 250, V4L2_IDENT_OV7720 = 251, V4L2_IDENT_OV7725 = 252, + V4L2_IDENT_OV7660 = 253, + V4L2_IDENT_OV9650 = 254, + V4L2_IDENT_OV9655 = 255, + V4L2_IDENT_SOI968 = 256, /* module saa7146: reserved range 300-309 */ V4L2_IDENT_SAA7146 = 300, @@ -161,6 +165,9 @@ enum { /* module tw9910: just ident 9910 */ V4L2_IDENT_TW9910 = 9910, + /* module sn9c20x: just ident 10000 */ + V4L2_IDENT_SN9C20X = 10000, + /* module msp3400: reserved range 34000-34999 and 44000-44999 */ V4L2_IDENT_MSPX4XX = 34000, /* generic MSPX4XX identifier, only use internally (tveeprom.c). */ @@ -237,6 +244,11 @@ enum { V4L2_IDENT_MT9V022IX7ATC = 45010, /* No way to detect "normal" I77ATx */ V4L2_IDENT_MT9V022IX7ATM = 45015, /* and "lead free" IA7ATx chips */ V4L2_IDENT_MT9T031 = 45020, + V4L2_IDENT_MT9V111 = 45031, + V4L2_IDENT_MT9V112 = 45032, + + /* HV7131R CMOS sensor: just ident 46000 */ + V4L2_IDENT_HV7131R = 46000, /* module cs53132a: just ident 53132 */ V4L2_IDENT_CS53l32A = 53132, -- cgit v1.2.3 From 3eb0237d445c23e9f46b11a07bce986eca450640 Mon Sep 17 00:00:00 2001 From: Julia Lawall Date: Sun, 19 Jul 2009 07:09:32 -0300 Subject: V4L/DVB (12284): gspca - jpeg subdrivers: Check the result of kmalloc(jpeg header). Signed-off-by: Julia Lawall Signed-off-by: Jean-Francois Moine Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/gspca/conex.c | 2 ++ drivers/media/video/gspca/mars.c | 2 ++ drivers/media/video/gspca/sonixj.c | 2 ++ drivers/media/video/gspca/spca500.c | 2 ++ drivers/media/video/gspca/stk014.c | 2 ++ drivers/media/video/gspca/sunplus.c | 2 ++ drivers/media/video/gspca/zc3xx.c | 2 ++ 7 files changed, 14 insertions(+) diff --git a/drivers/media/video/gspca/conex.c b/drivers/media/video/gspca/conex.c index 219cfa6fb87..8d48ea1742c 100644 --- a/drivers/media/video/gspca/conex.c +++ b/drivers/media/video/gspca/conex.c @@ -846,6 +846,8 @@ static int sd_start(struct gspca_dev *gspca_dev) /* create the JPEG header */ sd->jpeg_hdr = kmalloc(JPEG_HDR_SZ, GFP_KERNEL); + if (!sd->jpeg_hdr) + return -ENOMEM; jpeg_define(sd->jpeg_hdr, gspca_dev->height, gspca_dev->width, 0x22); /* JPEG 411 */ jpeg_set_qual(sd->jpeg_hdr, sd->quality); diff --git a/drivers/media/video/gspca/mars.c b/drivers/media/video/gspca/mars.c index 75e8d14e4ac..de769caf013 100644 --- a/drivers/media/video/gspca/mars.c +++ b/drivers/media/video/gspca/mars.c @@ -201,6 +201,8 @@ static int sd_start(struct gspca_dev *gspca_dev) /* create the JPEG header */ sd->jpeg_hdr = kmalloc(JPEG_HDR_SZ, GFP_KERNEL); + if (!sd->jpeg_hdr) + return -ENOMEM; jpeg_define(sd->jpeg_hdr, gspca_dev->height, gspca_dev->width, 0x21); /* JPEG 422 */ jpeg_set_qual(sd->jpeg_hdr, sd->quality); diff --git a/drivers/media/video/gspca/sonixj.c b/drivers/media/video/gspca/sonixj.c index bad309b90cc..d6332ab8066 100644 --- a/drivers/media/video/gspca/sonixj.c +++ b/drivers/media/video/gspca/sonixj.c @@ -1737,6 +1737,8 @@ static int sd_start(struct gspca_dev *gspca_dev) /* create the JPEG header */ sd->jpeg_hdr = kmalloc(JPEG_HDR_SZ, GFP_KERNEL); + if (!sd->jpeg_hdr) + return -ENOMEM; jpeg_define(sd->jpeg_hdr, gspca_dev->height, gspca_dev->width, 0x21); /* JPEG 422 */ jpeg_set_qual(sd->jpeg_hdr, sd->quality); diff --git a/drivers/media/video/gspca/spca500.c b/drivers/media/video/gspca/spca500.c index 8806b2ff82b..fab7ef85a6c 100644 --- a/drivers/media/video/gspca/spca500.c +++ b/drivers/media/video/gspca/spca500.c @@ -670,6 +670,8 @@ static int sd_start(struct gspca_dev *gspca_dev) /* create the JPEG header */ sd->jpeg_hdr = kmalloc(JPEG_HDR_SZ, GFP_KERNEL); + if (!sd->jpeg_hdr) + return -ENOMEM; jpeg_define(sd->jpeg_hdr, gspca_dev->height, gspca_dev->width, 0x22); /* JPEG 411 */ jpeg_set_qual(sd->jpeg_hdr, sd->quality); diff --git a/drivers/media/video/gspca/stk014.c b/drivers/media/video/gspca/stk014.c index f25be20cf1a..47628964801 100644 --- a/drivers/media/video/gspca/stk014.c +++ b/drivers/media/video/gspca/stk014.c @@ -333,6 +333,8 @@ static int sd_start(struct gspca_dev *gspca_dev) /* create the JPEG header */ sd->jpeg_hdr = kmalloc(JPEG_HDR_SZ, GFP_KERNEL); + if (!sd->jpeg_hdr) + return -ENOMEM; jpeg_define(sd->jpeg_hdr, gspca_dev->height, gspca_dev->width, 0x22); /* JPEG 411 */ jpeg_set_qual(sd->jpeg_hdr, sd->quality); diff --git a/drivers/media/video/gspca/sunplus.c b/drivers/media/video/gspca/sunplus.c index 9623f294bda..5127bbf9dd2 100644 --- a/drivers/media/video/gspca/sunplus.c +++ b/drivers/media/video/gspca/sunplus.c @@ -973,6 +973,8 @@ static int sd_start(struct gspca_dev *gspca_dev) /* create the JPEG header */ sd->jpeg_hdr = kmalloc(JPEG_HDR_SZ, GFP_KERNEL); + if (!sd->jpeg_hdr) + return -ENOMEM; jpeg_define(sd->jpeg_hdr, gspca_dev->height, gspca_dev->width, 0x22); /* JPEG 411 */ jpeg_set_qual(sd->jpeg_hdr, sd->quality); diff --git a/drivers/media/video/gspca/zc3xx.c b/drivers/media/video/gspca/zc3xx.c index 08422d315e6..3d2756f7874 100644 --- a/drivers/media/video/gspca/zc3xx.c +++ b/drivers/media/video/gspca/zc3xx.c @@ -7243,6 +7243,8 @@ static int sd_start(struct gspca_dev *gspca_dev) /* create the JPEG header */ sd->jpeg_hdr = kmalloc(JPEG_HDR_SZ, GFP_KERNEL); + if (!sd->jpeg_hdr) + return -ENOMEM; jpeg_define(sd->jpeg_hdr, gspca_dev->height, gspca_dev->width, 0x21); /* JPEG 422 */ jpeg_set_qual(sd->jpeg_hdr, sd->quality); -- cgit v1.2.3 From c15b95edb98f184e73f756511a60a7994cd9d840 Mon Sep 17 00:00:00 2001 From: Mauro Carvalho Chehab Date: Sun, 19 Jul 2009 18:03:23 -0300 Subject: V4L/DVB (12286): sn9c20x: reorder includes to be like other drivers This is not just pure cosmetic, since the order affects the out-of-tree module build at the -hg development tree. Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/gspca/sn9c20x.c | 9 +++++---- 1 file changed, 5 insertions(+), 4 deletions(-) diff --git a/drivers/media/video/gspca/sn9c20x.c b/drivers/media/video/gspca/sn9c20x.c index 78ab26ceb90..fcfbbd329b4 100644 --- a/drivers/media/video/gspca/sn9c20x.c +++ b/drivers/media/video/gspca/sn9c20x.c @@ -18,10 +18,6 @@ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA */ -#include "gspca.h" -#include "jpeg.h" - -#include #ifdef CONFIG_USB_GSPCA_SN9C20X_EVDEV #include #include @@ -29,6 +25,11 @@ #include #endif +#include "gspca.h" +#include "jpeg.h" + +#include + MODULE_AUTHOR("Brian Johnson , " "microdia project "); MODULE_DESCRIPTION("GSPCA/SN9C20X USB Camera Driver"); -- cgit v1.2.3 From 68b7f7616add4b1de0fe75015ba3884d2d9ff796 Mon Sep 17 00:00:00 2001 From: Trent Piepho Date: Thu, 11 Jun 2009 19:31:22 -0300 Subject: V4L/DVB (12291): b2c2: fix frontends compiled into kernel A recent patch didn't take into account that frontends can be compiled into the kernel. Or that frontends compiled as modules can't be used by the b2c2 driver if it is not a module itself. Some frontends require multiple drivers, e.g. a demod driver and a tuner driver. The code for the frontend support was getting added if the demod driver was available. Change this to also require any needed tuner or SEC drivers as well. Signed-off-by: Trent Piepho Signed-off-by: Mauro Carvalho Chehab --- drivers/media/dvb/b2c2/flexcop-fe-tuner.c | 67 +++++++++++++++++-------------- 1 file changed, 37 insertions(+), 30 deletions(-) diff --git a/drivers/media/dvb/b2c2/flexcop-fe-tuner.c b/drivers/media/dvb/b2c2/flexcop-fe-tuner.c index efb4a6c2b57..9a6307a347b 100644 --- a/drivers/media/dvb/b2c2/flexcop-fe-tuner.c +++ b/drivers/media/dvb/b2c2/flexcop-fe-tuner.c @@ -20,8 +20,14 @@ #include "tuner-simple.h" #include "stv0297.h" + +/* Can we use the specified front-end? Remember that if we are compiled + * into the kernel we can't call code that's in modules. */ +#define FE_SUPPORTED(fe) (defined(CONFIG_DVB_##fe) || \ + (defined(CONFIG_DVB_##fe##_MODULE) && defined(MODULE))) + /* lnb control */ -#if defined(CONFIG_DVB_MT312_MODULE) || defined(CONFIG_DVB_STV0299_MODULE) +#if FE_SUPPORTED(MT312) || FE_SUPPORTED(STV0299) static int flexcop_set_voltage(struct dvb_frontend *fe, fe_sec_voltage_t voltage) { struct flexcop_device *fc = fe->dvb->priv; @@ -49,8 +55,7 @@ static int flexcop_set_voltage(struct dvb_frontend *fe, fe_sec_voltage_t voltage } #endif -#if defined(CONFIG_DVB_S5H1420_MODULE) || defined(CONFIG_DVB_STV0299_MODULE) \ - || defined(CONFIG_DVB_MT312_MODULE) +#if FE_SUPPORTED(S5H1420) || FE_SUPPORTED(STV0299) || FE_SUPPORTED(MT312) static int flexcop_sleep(struct dvb_frontend* fe) { struct flexcop_device *fc = fe->dvb->priv; @@ -61,7 +66,7 @@ static int flexcop_sleep(struct dvb_frontend* fe) #endif /* SkyStar2 DVB-S rev 2.3 */ -#if defined(CONFIG_DVB_MT312_MODULE) +#if FE_SUPPORTED(MT312) static int flexcop_set_tone(struct dvb_frontend *fe, fe_sec_tone_mode_t tone) { /* u16 wz_half_period_for_45_mhz[] = { 0x01ff, 0x0154, 0x00ff, 0x00cc }; */ @@ -193,10 +198,12 @@ static int skystar2_rev23_attach(struct flexcop_device *fc, } return 0; } +#else +#define skystar2_rev23_attach NULL #endif /* SkyStar2 DVB-S rev 2.6 */ -#if defined(CONFIG_DVB_STV0299_MODULE) +#if FE_SUPPORTED(STV0299) static int samsung_tbmu24112_set_symbol_rate(struct dvb_frontend *fe, u32 srate, u32 ratio) { @@ -321,10 +328,12 @@ static int skystar2_rev26_attach(struct flexcop_device *fc, } return 0; } +#else +#define skystar2_rev26_attach NULL #endif /* SkyStar2 DVB-S rev 2.7 */ -#if defined(CONFIG_DVB_S5H1420_MODULE) +#if FE_SUPPORTED(S5H1420) && FE_SUPPORTED(ISL6421) && FE_SUPPORTED(TUNER_ITD1000) static struct s5h1420_config skystar2_rev2_7_s5h1420_config = { .demod_address = 0x53, .invert = 1, @@ -385,10 +394,12 @@ fail: fc->fc_i2c_adap[0].no_base_addr = 0; return 0; } +#else +#define skystar2_rev27_attach NULL #endif /* SkyStar2 rev 2.8 */ -#if defined(CONFIG_DVB_CX24123_MODULE) +#if FE_SUPPORTED(CX24123) && FE_SUPPORTED(ISL6421) && FE_SUPPORTED(TUNER_CX24113) static struct cx24123_config skystar2_rev2_8_cx24123_config = { .demod_address = 0x55, .dont_use_pll = 1, @@ -433,10 +444,12 @@ static int skystar2_rev28_attach(struct flexcop_device *fc, * IR-receiver (PIC16F818) - but the card has no input for that ??? */ return 1; } +#else +#define skystar2_rev28_attach NULL #endif /* AirStar DVB-T */ -#if defined(CONFIG_DVB_MT352_MODULE) +#if FE_SUPPORTED(MT352) static int samsung_tdtc9251dh0_demod_init(struct dvb_frontend *fe) { static u8 mt352_clock_config[] = { 0x89, 0x18, 0x2d }; @@ -495,10 +508,12 @@ static int airstar_dvbt_attach(struct flexcop_device *fc, } return 0; } +#else +#define airstar_dvbt_attach NULL #endif /* AirStar ATSC 1st generation */ -#if defined(CONFIG_DVB_BCM3510_MODULE) +#if FE_SUPPORTED(BCM3510) static int flexcop_fe_request_firmware(struct dvb_frontend *fe, const struct firmware **fw, char* name) { @@ -517,10 +532,12 @@ static int airstar_atsc1_attach(struct flexcop_device *fc, fc->fe = dvb_attach(bcm3510_attach, &air2pc_atsc_first_gen_config, i2c); return fc->fe != NULL; } +#else +#define airstar_atsc1_attach NULL #endif /* AirStar ATSC 2nd generation */ -#if defined(CONFIG_DVB_NXT200X_MODULE) +#if FE_SUPPORTED(NXT200X) && FE_SUPPORTED(PLL) static struct nxt200x_config samsung_tbmv_config = { .demod_address = 0x0a, }; @@ -535,10 +552,12 @@ static int airstar_atsc2_attach(struct flexcop_device *fc, return !!dvb_attach(dvb_pll_attach, fc->fe, 0x61, NULL, DVB_PLL_SAMSUNG_TBMV); } +#else +#define airstar_atsc2_attach NULL #endif /* AirStar ATSC 3rd generation */ -#if defined(CONFIG_DVB_LGDT330X_MODULE) +#if FE_SUPPORTED(LGDT330X) static struct lgdt330x_config air2pc_atsc_hd5000_config = { .demod_address = 0x59, .demod_chip = LGDT3303, @@ -556,10 +575,12 @@ static int airstar_atsc3_attach(struct flexcop_device *fc, return !!dvb_attach(simple_tuner_attach, fc->fe, i2c, 0x61, TUNER_LG_TDVS_H06XF); } +#else +#define airstar_atsc3_attach NULL #endif /* CableStar2 DVB-C */ -#if defined(CONFIG_DVB_STV0297_MODULE) +#if FE_SUPPORTED(STV0297) static int alps_tdee4_stv0297_tuner_set_params(struct dvb_frontend* fe, struct dvb_frontend_parameters *fep) { @@ -698,39 +719,23 @@ static int cablestar2_attach(struct flexcop_device *fc, fc->fe->ops.tuner_ops.set_params = alps_tdee4_stv0297_tuner_set_params; return 1; } +#else +#define cablestar2_attach NULL #endif static struct { flexcop_device_type_t type; int (*attach)(struct flexcop_device *, struct i2c_adapter *); } flexcop_frontends[] = { -#if defined(CONFIG_DVB_S5H1420_MODULE) { FC_SKY_REV27, skystar2_rev27_attach }, -#endif -#if defined(CONFIG_DVB_CX24123_MODULE) { FC_SKY_REV28, skystar2_rev28_attach }, -#endif -#if defined(CONFIG_DVB_STV0299_MODULE) { FC_SKY_REV26, skystar2_rev26_attach }, -#endif -#if defined(CONFIG_DVB_MT352_MODULE) { FC_AIR_DVBT, airstar_dvbt_attach }, -#endif -#if defined(CONFIG_DVB_NXT200X_MODULE) { FC_AIR_ATSC2, airstar_atsc2_attach }, -#endif -#if defined(CONFIG_DVB_LGDT330X_MODULE) { FC_AIR_ATSC3, airstar_atsc3_attach }, -#endif -#if defined(CONFIG_DVB_BCM3510_MODULE) { FC_AIR_ATSC1, airstar_atsc1_attach }, -#endif -#if defined(CONFIG_DVB_STV0297_MODULE) { FC_CABLE, cablestar2_attach }, -#endif -#if defined(CONFIG_DVB_MT312_MODULE) { FC_SKY_REV23, skystar2_rev23_attach }, -#endif }; /* try to figure out the frontend */ @@ -738,6 +743,8 @@ int flexcop_frontend_init(struct flexcop_device *fc) { int i; for (i = 0; i < ARRAY_SIZE(flexcop_frontends); i++) { + if (!flexcop_frontends[i].attach) + continue; /* type needs to be set before, because of some workarounds * done based on the probed card type */ fc->dev_type = flexcop_frontends[i].type; -- cgit v1.2.3 From 2c90577841a76f1935ff3437ffb552b41f5c28fa Mon Sep 17 00:00:00 2001 From: Hans Verkuil Date: Mon, 20 Jul 2009 08:14:17 -0300 Subject: V4L/DVB (12300): bttv: fix regression: tvaudio must be loaded before tuner Both tvaudio and the tuner share i2c address 0x42. The tvaudio module can check whether it really is a tda9840, but the tuner can't. So the tvaudio module must be loaded before the tuner module. This was also the case for 2.6.29, but the order was swapped in 2.6.30. Thanks to Krzysztof Grygiencz for reporting and testing this. Signed-off-by: Hans Verkuil Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/bt8xx/bttv-cards.c | 92 +++++++++++++++++---------------- drivers/media/video/bt8xx/bttv-driver.c | 1 + drivers/media/video/bt8xx/bttv.h | 1 + 3 files changed, 50 insertions(+), 44 deletions(-) diff --git a/drivers/media/video/bt8xx/bttv-cards.c b/drivers/media/video/bt8xx/bttv-cards.c index fdb4adff3d2..ca6558c394b 100644 --- a/drivers/media/video/bt8xx/bttv-cards.c +++ b/drivers/media/video/bt8xx/bttv-cards.c @@ -3324,8 +3324,6 @@ void __devinit bttv_init_card1(struct bttv *btv) /* initialization part two -- after registering i2c bus */ void __devinit bttv_init_card2(struct bttv *btv) { - int addr=ADDR_UNSET; - btv->tuner_type = UNSET; if (BTTV_BOARD_UNKNOWN == btv->c.type) { @@ -3470,9 +3468,6 @@ void __devinit bttv_init_card2(struct bttv *btv) btv->pll.pll_current = -1; /* tuner configuration (from card list / autodetect / insmod option) */ - if (ADDR_UNSET != bttv_tvcards[btv->c.type].tuner_addr) - addr = bttv_tvcards[btv->c.type].tuner_addr; - if (UNSET != bttv_tvcards[btv->c.type].tuner_type) if (UNSET == btv->tuner_type) btv->tuner_type = bttv_tvcards[btv->c.type].tuner_type; @@ -3496,40 +3491,6 @@ void __devinit bttv_init_card2(struct bttv *btv) if (UNSET == btv->tuner_type) btv->tuner_type = TUNER_ABSENT; - if (btv->tuner_type != TUNER_ABSENT) { - struct tuner_setup tun_setup; - - /* Load tuner module before issuing tuner config call! */ - if (bttv_tvcards[btv->c.type].has_radio) - v4l2_i2c_new_probed_subdev(&btv->c.v4l2_dev, - &btv->c.i2c_adap, "tuner", "tuner", - v4l2_i2c_tuner_addrs(ADDRS_RADIO)); - v4l2_i2c_new_probed_subdev(&btv->c.v4l2_dev, - &btv->c.i2c_adap, "tuner", "tuner", - v4l2_i2c_tuner_addrs(ADDRS_DEMOD)); - v4l2_i2c_new_probed_subdev(&btv->c.v4l2_dev, - &btv->c.i2c_adap, "tuner", "tuner", - v4l2_i2c_tuner_addrs(ADDRS_TV_WITH_DEMOD)); - - tun_setup.mode_mask = T_ANALOG_TV | T_DIGITAL_TV; - tun_setup.type = btv->tuner_type; - tun_setup.addr = addr; - - if (bttv_tvcards[btv->c.type].has_radio) - tun_setup.mode_mask |= T_RADIO; - - bttv_call_all(btv, tuner, s_type_addr, &tun_setup); - } - - if (btv->tda9887_conf) { - struct v4l2_priv_tun_config tda9887_cfg; - - tda9887_cfg.tuner = TUNER_TDA9887; - tda9887_cfg.priv = &btv->tda9887_conf; - - bttv_call_all(btv, tuner, s_config, &tda9887_cfg); - } - btv->dig = bttv_tvcards[btv->c.type].has_dig_in ? bttv_tvcards[btv->c.type].video_inputs - 1 : UNSET; btv->svhs = bttv_tvcards[btv->c.type].svhs == NO_SVHS ? @@ -3540,15 +3501,15 @@ void __devinit bttv_init_card2(struct bttv *btv) btv->has_remote = remote[btv->c.nr]; if (bttv_tvcards[btv->c.type].has_radio) - btv->has_radio=1; + btv->has_radio = 1; if (bttv_tvcards[btv->c.type].has_remote) - btv->has_remote=1; + btv->has_remote = 1; if (!bttv_tvcards[btv->c.type].no_gpioirq) - btv->gpioirq=1; + btv->gpioirq = 1; if (bttv_tvcards[btv->c.type].volume_gpio) - btv->volume_gpio=bttv_tvcards[btv->c.type].volume_gpio; + btv->volume_gpio = bttv_tvcards[btv->c.type].volume_gpio; if (bttv_tvcards[btv->c.type].audio_mode_gpio) - btv->audio_mode_gpio=bttv_tvcards[btv->c.type].audio_mode_gpio; + btv->audio_mode_gpio = bttv_tvcards[btv->c.type].audio_mode_gpio; if (btv->tuner_type == TUNER_ABSENT) return; /* no tuner or related drivers to load */ @@ -3666,6 +3627,49 @@ no_audio: } +/* initialize the tuner */ +void __devinit bttv_init_tuner(struct bttv *btv) +{ + int addr = ADDR_UNSET; + + if (ADDR_UNSET != bttv_tvcards[btv->c.type].tuner_addr) + addr = bttv_tvcards[btv->c.type].tuner_addr; + + if (btv->tuner_type != TUNER_ABSENT) { + struct tuner_setup tun_setup; + + /* Load tuner module before issuing tuner config call! */ + if (bttv_tvcards[btv->c.type].has_radio) + v4l2_i2c_new_probed_subdev(&btv->c.v4l2_dev, + &btv->c.i2c_adap, "tuner", "tuner", + v4l2_i2c_tuner_addrs(ADDRS_RADIO)); + v4l2_i2c_new_probed_subdev(&btv->c.v4l2_dev, + &btv->c.i2c_adap, "tuner", "tuner", + v4l2_i2c_tuner_addrs(ADDRS_DEMOD)); + v4l2_i2c_new_probed_subdev(&btv->c.v4l2_dev, + &btv->c.i2c_adap, "tuner", "tuner", + v4l2_i2c_tuner_addrs(ADDRS_TV_WITH_DEMOD)); + + tun_setup.mode_mask = T_ANALOG_TV | T_DIGITAL_TV; + tun_setup.type = btv->tuner_type; + tun_setup.addr = addr; + + if (bttv_tvcards[btv->c.type].has_radio) + tun_setup.mode_mask |= T_RADIO; + + bttv_call_all(btv, tuner, s_type_addr, &tun_setup); + } + + if (btv->tda9887_conf) { + struct v4l2_priv_tun_config tda9887_cfg; + + tda9887_cfg.tuner = TUNER_TDA9887; + tda9887_cfg.priv = &btv->tda9887_conf; + + bttv_call_all(btv, tuner, s_config, &tda9887_cfg); + } +} + /* ----------------------------------------------------------------------- */ static void modtec_eeprom(struct bttv *btv) diff --git a/drivers/media/video/bt8xx/bttv-driver.c b/drivers/media/video/bt8xx/bttv-driver.c index d147d29bb0d..8cc6dd28d6a 100644 --- a/drivers/media/video/bt8xx/bttv-driver.c +++ b/drivers/media/video/bt8xx/bttv-driver.c @@ -4419,6 +4419,7 @@ static int __devinit bttv_probe(struct pci_dev *dev, /* some card-specific stuff (needs working i2c) */ bttv_init_card2(btv); + bttv_init_tuner(btv); init_irqreg(btv); /* register video4linux + input */ diff --git a/drivers/media/video/bt8xx/bttv.h b/drivers/media/video/bt8xx/bttv.h index 3d36daf206f..3ec2402c6b4 100644 --- a/drivers/media/video/bt8xx/bttv.h +++ b/drivers/media/video/bt8xx/bttv.h @@ -283,6 +283,7 @@ extern struct tvcard bttv_tvcards[]; extern void bttv_idcard(struct bttv *btv); extern void bttv_init_card1(struct bttv *btv); extern void bttv_init_card2(struct bttv *btv); +extern void bttv_init_tuner(struct bttv *btv); /* card-specific funtions */ extern void tea5757_set_freq(struct bttv *btv, unsigned short freq); -- cgit v1.2.3 From 12a34cc8a9a49219ab643c8ec329078eec272b47 Mon Sep 17 00:00:00 2001 From: Michael Krufky Date: Sun, 19 Jul 2009 18:19:18 -0300 Subject: V4L/DVB (12302): cx23885-417: fix broken IOCTL handling IOCTLS will never get handled if we dont connect video_ioctl2 to mpeg_fops.ioctl Signed-off-by: Michael Krufky Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/cx23885/cx23885-417.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/media/video/cx23885/cx23885-417.c b/drivers/media/video/cx23885/cx23885-417.c index 428f0c45e6b..2ea7181ae8f 100644 --- a/drivers/media/video/cx23885/cx23885-417.c +++ b/drivers/media/video/cx23885/cx23885-417.c @@ -1677,6 +1677,7 @@ static struct v4l2_file_operations mpeg_fops = { .read = mpeg_read, .poll = mpeg_poll, .mmap = mpeg_mmap, + .ioctl = video_ioctl2, }; static const struct v4l2_ioctl_ops mpeg_ioctl_ops = { -- cgit v1.2.3 From ca4e771f7b878b7bab02dedb539f7742f9b4f50e Mon Sep 17 00:00:00 2001 From: Michael Krufky Date: Sun, 19 Jul 2009 17:55:35 -0300 Subject: V4L/DVB (12303): cx23885: check pointers before dereferencing in dprintk macro When enabling debug with v4l_debug set to 2 or greater, the driver OOPS's on startup. Checks dev pointer before dereferencing, in order to prevent this OOPS. Signed-off-by: Michael Krufky Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/cx23885/cx23885-417.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/media/video/cx23885/cx23885-417.c b/drivers/media/video/cx23885/cx23885-417.c index 2ea7181ae8f..e0cf21e0b1b 100644 --- a/drivers/media/video/cx23885/cx23885-417.c +++ b/drivers/media/video/cx23885/cx23885-417.c @@ -58,7 +58,8 @@ MODULE_PARM_DESC(v4l_debug, "enable V4L debug messages"); #define dprintk(level, fmt, arg...)\ do { if (v4l_debug >= level) \ - printk(KERN_DEBUG "%s: " fmt, dev->name , ## arg);\ + printk(KERN_DEBUG "%s: " fmt, \ + (dev) ? dev->name : "cx23885[?]", ## arg); \ } while (0) static struct cx23885_tvnorm cx23885_tvnorms[] = { -- cgit v1.2.3 From ebecd3d9d2adba144c15f1d35c78e0c26ead1bfd Mon Sep 17 00:00:00 2001 From: Sage Weil Date: Fri, 24 Jul 2009 13:17:44 -0400 Subject: Btrfs: make flushoncommit mount option correctly wait on ordered_extents The commit_transaction call to wait_ordered_extents when snap_pending passes nocow_only=1 to process only NOCOW or PREALLOC extents. This isn't correct for the 'flushoncommit' mode, as it skips extents we just started IO on in start_delalloc_inodes. So, in the flushoncommit case, wait on all ordered extents. Otherwise, only pass the nocow_only flag to wait_ordered_extents if snap_pending. Signed-off-by: Sage Weil Signed-off-by: Chris Mason --- fs/btrfs/transaction.c | 8 +++++--- 1 file changed, 5 insertions(+), 3 deletions(-) diff --git a/fs/btrfs/transaction.c b/fs/btrfs/transaction.c index 32454d1c566..e51d2bc532f 100644 --- a/fs/btrfs/transaction.c +++ b/fs/btrfs/transaction.c @@ -942,9 +942,11 @@ int btrfs_commit_transaction(struct btrfs_trans_handle *trans, mutex_unlock(&root->fs_info->trans_mutex); - if (flush_on_commit || snap_pending) { - if (flush_on_commit) - btrfs_start_delalloc_inodes(root); + if (flush_on_commit) { + btrfs_start_delalloc_inodes(root); + ret = btrfs_wait_ordered_extents(root, 0); + BUG_ON(ret); + } else if (snap_pending) { ret = btrfs_wait_ordered_extents(root, 1); BUG_ON(ret); } -- cgit v1.2.3 From 283bb1979fa8580c4037d8df251449368c292a3b Mon Sep 17 00:00:00 2001 From: Chris Mason Date: Fri, 24 Jul 2009 16:30:55 -0400 Subject: Btrfs: clear all space_info->full after removing a block group Btrfs allocates individual extents from block groups, and each block group has a specific type. It may hold metadata, data mirrored or striped etc. When we balance space (btrfs-vol -b) or remove a drive (btrfs-vol -r) we free block groups. Once a block group is freed, the space it was using on the device may be available for use by new block groups. btrfs_remove_block_group was clearing the flag that said 'our devices are full, don't even try to allocate new block groups', but it was only clearing that flag for a specific type of block group. This commit clears the full flag for all of the types of block groups, making it much more likely that we'll be able to balance space when the drive is close to full. Signed-off-by: Chris Mason --- fs/btrfs/extent-tree.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/fs/btrfs/extent-tree.c b/fs/btrfs/extent-tree.c index 9a489cc89fd..508df5f7d2e 100644 --- a/fs/btrfs/extent-tree.c +++ b/fs/btrfs/extent-tree.c @@ -7486,7 +7486,8 @@ int btrfs_remove_block_group(struct btrfs_trans_handle *trans, block_group->space_info->total_bytes -= block_group->key.offset; block_group->space_info->bytes_readonly -= block_group->key.offset; spin_unlock(&block_group->space_info->lock); - block_group->space_info->full = 0; + + btrfs_clear_space_info_full(root->fs_info); btrfs_put_block_group(block_group); btrfs_put_block_group(block_group); -- cgit v1.2.3 From 9779b72f0584fd53e0de53f62f205bf0dc0db553 Mon Sep 17 00:00:00 2001 From: Chris Mason Date: Fri, 24 Jul 2009 16:41:41 -0400 Subject: Btrfs: find smallest available device extent during chunk allocation Allocating new block group is easy when the disk has plenty of space. But things get difficult as the disk fills up, especially if the FS has been run through btrfs-vol -b. The balance operation is likely to make the total bytes available on the device greater than the largest extent we'll actually be able to allocate. But the device extent allocation code incorrectly assumes that a device with 5G free will be able to allocate a 5G extent. It isn't normally a problem because device extents don't get freed unless btrfs-vol -b is run. This fixes the device extent allocator to remember the largest free extent it can find, and then uses that value as a fallback. Signed-off-by: Chris Mason --- fs/btrfs/volumes.c | 12 ++++++++++-- 1 file changed, 10 insertions(+), 2 deletions(-) diff --git a/fs/btrfs/volumes.c b/fs/btrfs/volumes.c index 074c1c56d8c..5dbefd11b4a 100644 --- a/fs/btrfs/volumes.c +++ b/fs/btrfs/volumes.c @@ -721,7 +721,8 @@ error: */ static noinline int find_free_dev_extent(struct btrfs_trans_handle *trans, struct btrfs_device *device, - u64 num_bytes, u64 *start) + u64 num_bytes, u64 *start, + u64 *max_avail) { struct btrfs_key key; struct btrfs_root *root = device->dev_root; @@ -807,6 +808,10 @@ no_more_items: if (last_byte < search_start) last_byte = search_start; hole_size = key.offset - last_byte; + + if (hole_size > *max_avail) + *max_avail = hole_size; + if (key.offset > last_byte && hole_size >= num_bytes) { *start = last_byte; @@ -1625,6 +1630,7 @@ static int __btrfs_grow_device(struct btrfs_trans_handle *trans, device->fs_devices->total_rw_bytes += diff; device->total_bytes = new_size; + device->disk_total_bytes = new_size; btrfs_clear_space_info_full(device->dev_root->fs_info); return btrfs_update_device(trans, device); @@ -2175,6 +2181,7 @@ static int __btrfs_alloc_chunk(struct btrfs_trans_handle *trans, max_chunk_size); again: + max_avail = 0; if (!map || map->num_stripes != num_stripes) { kfree(map); map = kmalloc(map_lookup_size(num_stripes), GFP_NOFS); @@ -2223,7 +2230,8 @@ again: if (device->in_fs_metadata && avail >= min_free) { ret = find_free_dev_extent(trans, device, - min_free, &dev_offset); + min_free, &dev_offset, + &max_avail); if (ret == 0) { list_move_tail(&device->dev_alloc_list, &private_devs); -- cgit v1.2.3 From f83284fe209b1d143244bf462abf1b414eb7b62a Mon Sep 17 00:00:00 2001 From: roel kluin Date: Sat, 25 Jul 2009 07:41:12 +0000 Subject: fealnx: Write outside array bounds phy_idx is checked to be < 4, but np->phys[] is 2 elements long Signed-off-by: Roel Kluin Signed-off-by: David S. Miller --- drivers/net/fealnx.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/net/fealnx.c b/drivers/net/fealnx.c index 891be28a7d4..ee51557e942 100644 --- a/drivers/net/fealnx.c +++ b/drivers/net/fealnx.c @@ -584,7 +584,8 @@ static int __devinit fealnx_init_one(struct pci_dev *pdev, if (np->flags == HAS_MII_XCVR) { int phy, phy_idx = 0; - for (phy = 1; phy < 32 && phy_idx < 4; phy++) { + for (phy = 1; phy < 32 && phy_idx < ARRAY_SIZE(np->phys); + phy++) { int mii_status = mdio_read(dev, phy, 1); if (mii_status != 0xffff && mii_status != 0x0000) { -- cgit v1.2.3 From 3b73e79b0dcc86f8bec68a34b7fb812eec953f34 Mon Sep 17 00:00:00 2001 From: roel kluin Date: Sat, 25 Jul 2009 12:01:50 +0000 Subject: at1700: Read buffer overflow loop bound looks to be wrong, for an array of length 8 Signed-off-by: Roel Kluin Signed-off-by: David S. Miller --- drivers/net/at1700.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/at1700.c b/drivers/net/at1700.c index 18b566ad4fd..cf30e278f18 100644 --- a/drivers/net/at1700.c +++ b/drivers/net/at1700.c @@ -318,7 +318,7 @@ static int __init at1700_probe1(struct net_device *dev, int ioaddr) pos3 = mca_read_stored_pos( slot, 3 ); pos4 = mca_read_stored_pos( slot, 4 ); - for (l_i = 0; l_i < 0x09; l_i++) + for (l_i = 0; l_i < 8; l_i++) if (( pos3 & 0x07) == at1700_ioaddr_pattern[l_i]) break; ioaddr = at1700_mca_probe_list[l_i]; -- cgit v1.2.3 From c65d3198addb1a2862d4b88bc2a74ac9cbed66f9 Mon Sep 17 00:00:00 2001 From: roel kluin Date: Sat, 25 Jul 2009 12:38:33 +0000 Subject: tokenring: Read buffer overflow io[i] is read before the bounds check on i, order should be reversed Signed-off-by: Roel Kluin Signed-off-by: David S. Miller --- drivers/net/tokenring/ibmtr.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/tokenring/ibmtr.c b/drivers/net/tokenring/ibmtr.c index 9d896116cf7..08a6c41c159 100644 --- a/drivers/net/tokenring/ibmtr.c +++ b/drivers/net/tokenring/ibmtr.c @@ -1912,7 +1912,7 @@ static int __init ibmtr_init(void) find_turbo_adapters(io); - for (i = 0; io[i] && (i < IBMTR_MAX_ADAPTERS); i++) { + for (i = 0; i < IBMTR_MAX_ADAPTERS && io[i]; i++) { struct net_device *dev; irq[i] = 0; mem[i] = 0; -- cgit v1.2.3 From d513d018e2236930b6163241bbdce64d2c0de49e Mon Sep 17 00:00:00 2001 From: Roel Kluin Date: Sun, 26 Jul 2009 18:53:17 -0700 Subject: eepro: Read buffer overflow io[i] is read before the bounds check on i, order should be reversed Signed-off-by: Roel Kluin Signed-off-by: David S. Miller --- drivers/net/eepro.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/eepro.c b/drivers/net/eepro.c index cc2ab6412c7..4f700348534 100644 --- a/drivers/net/eepro.c +++ b/drivers/net/eepro.c @@ -1784,7 +1784,7 @@ int __init init_module(void) printk(KERN_INFO "eepro_init_module: Auto-detecting boards (May God protect us...)\n"); } - for (i = 0; io[i] != -1 && i < MAX_EEPRO; i++) { + for (i = 0; i < MAX_EEPRO && io[i] != -1; i++) { dev = alloc_etherdev(sizeof(struct eepro_local)); if (!dev) break; -- cgit v1.2.3 From dcf777f6ed9799c5ac90ac17a5c369e6b73ca92e Mon Sep 17 00:00:00 2001 From: Ralf Baechle Date: Sun, 26 Jul 2009 19:11:14 -0700 Subject: NET: ROSE: Don't use static buffer. The use of a static buffer in rose2asc() to return its result is not threadproof and can result in corruption if multiple threads are trying to use one of the procfs files based on rose2asc(). Signed-off-by: Ralf Baechle Signed-off-by: David S. Miller --- include/net/rose.h | 2 +- net/rose/af_rose.c | 18 ++++++++---------- net/rose/rose_route.c | 23 ++++++++++++----------- 3 files changed, 21 insertions(+), 22 deletions(-) diff --git a/include/net/rose.h b/include/net/rose.h index cbd5364b2c8..5ba9f02731e 100644 --- a/include/net/rose.h +++ b/include/net/rose.h @@ -156,7 +156,7 @@ extern int sysctl_rose_maximum_vcs; extern int sysctl_rose_window_size; extern int rosecmp(rose_address *, rose_address *); extern int rosecmpm(rose_address *, rose_address *, unsigned short); -extern const char *rose2asc(const rose_address *); +extern char *rose2asc(char *buf, const rose_address *); extern struct sock *rose_find_socket(unsigned int, struct rose_neigh *); extern void rose_kill_by_neigh(struct rose_neigh *); extern unsigned int rose_new_lci(struct rose_neigh *); diff --git a/net/rose/af_rose.c b/net/rose/af_rose.c index 6bd8e93869e..f0a76f6bca7 100644 --- a/net/rose/af_rose.c +++ b/net/rose/af_rose.c @@ -92,23 +92,21 @@ static void rose_set_lockdep_key(struct net_device *dev) /* * Convert a ROSE address into text. */ -const char *rose2asc(const rose_address *addr) +char *rose2asc(char *buf, const rose_address *addr) { - static char buffer[11]; - if (addr->rose_addr[0] == 0x00 && addr->rose_addr[1] == 0x00 && addr->rose_addr[2] == 0x00 && addr->rose_addr[3] == 0x00 && addr->rose_addr[4] == 0x00) { - strcpy(buffer, "*"); + strcpy(buf, "*"); } else { - sprintf(buffer, "%02X%02X%02X%02X%02X", addr->rose_addr[0] & 0xFF, + sprintf(buf, "%02X%02X%02X%02X%02X", addr->rose_addr[0] & 0xFF, addr->rose_addr[1] & 0xFF, addr->rose_addr[2] & 0xFF, addr->rose_addr[3] & 0xFF, addr->rose_addr[4] & 0xFF); } - return buffer; + return buf; } /* @@ -1437,7 +1435,7 @@ static void rose_info_stop(struct seq_file *seq, void *v) static int rose_info_show(struct seq_file *seq, void *v) { - char buf[11]; + char buf[11], rsbuf[11]; if (v == SEQ_START_TOKEN) seq_puts(seq, @@ -1455,8 +1453,8 @@ static int rose_info_show(struct seq_file *seq, void *v) devname = dev->name; seq_printf(seq, "%-10s %-9s ", - rose2asc(&rose->dest_addr), - ax2asc(buf, &rose->dest_call)); + rose2asc(rsbuf, &rose->dest_addr), + ax2asc(buf, &rose->dest_call)); if (ax25cmp(&rose->source_call, &null_ax25_address) == 0) callsign = "??????-?"; @@ -1465,7 +1463,7 @@ static int rose_info_show(struct seq_file *seq, void *v) seq_printf(seq, "%-10s %-9s %-5s %3.3X %05d %d %d %d %d %3lu %3lu %3lu %3lu %3lu %3lu/%03lu %5d %5d %ld\n", - rose2asc(&rose->source_addr), + rose2asc(rsbuf, &rose->source_addr), callsign, devname, rose->lci & 0x0FFF, diff --git a/net/rose/rose_route.c b/net/rose/rose_route.c index a81066a1010..9478d9b3d97 100644 --- a/net/rose/rose_route.c +++ b/net/rose/rose_route.c @@ -1104,6 +1104,7 @@ static void rose_node_stop(struct seq_file *seq, void *v) static int rose_node_show(struct seq_file *seq, void *v) { + char rsbuf[11]; int i; if (v == SEQ_START_TOKEN) @@ -1112,13 +1113,13 @@ static int rose_node_show(struct seq_file *seq, void *v) const struct rose_node *rose_node = v; /* if (rose_node->loopback) { seq_printf(seq, "%-10s %04d 1 loopback\n", - rose2asc(&rose_node->address), - rose_node->mask); + rose2asc(rsbuf, &rose_node->address), + rose_node->mask); } else { */ seq_printf(seq, "%-10s %04d %d", - rose2asc(&rose_node->address), - rose_node->mask, - rose_node->count); + rose2asc(rsbuf, &rose_node->address), + rose_node->mask, + rose_node->count); for (i = 0; i < rose_node->count; i++) seq_printf(seq, " %05d", @@ -1267,7 +1268,7 @@ static void rose_route_stop(struct seq_file *seq, void *v) static int rose_route_show(struct seq_file *seq, void *v) { - char buf[11]; + char buf[11], rsbuf[11]; if (v == SEQ_START_TOKEN) seq_puts(seq, @@ -1279,7 +1280,7 @@ static int rose_route_show(struct seq_file *seq, void *v) seq_printf(seq, "%3.3X %-10s %-9s %05d ", rose_route->lci1, - rose2asc(&rose_route->src_addr), + rose2asc(rsbuf, &rose_route->src_addr), ax2asc(buf, &rose_route->src_call), rose_route->neigh1->number); else @@ -1289,10 +1290,10 @@ static int rose_route_show(struct seq_file *seq, void *v) if (rose_route->neigh2) seq_printf(seq, "%3.3X %-10s %-9s %05d\n", - rose_route->lci2, - rose2asc(&rose_route->dest_addr), - ax2asc(buf, &rose_route->dest_call), - rose_route->neigh2->number); + rose_route->lci2, + rose2asc(rsbuf, &rose_route->dest_addr), + ax2asc(buf, &rose_route->dest_call), + rose_route->neigh2->number); else seq_puts(seq, "000 * * 00000\n"); -- cgit v1.2.3 From 4a29f396429132dc59f1856ea6cfc860a1955fa1 Mon Sep 17 00:00:00 2001 From: Alessandro Rubini Date: Wed, 22 Jul 2009 12:49:08 +0000 Subject: smc91x.h: add config for Nomadik evaluation kit Signed-off-by: Alessandro Rubini Acked-by: Andrea Gallo Signed-off-by: David S. Miller --- drivers/net/smc91x.h | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/net/smc91x.h b/drivers/net/smc91x.h index f1f773b17fe..57a159fac99 100644 --- a/drivers/net/smc91x.h +++ b/drivers/net/smc91x.h @@ -186,7 +186,8 @@ static inline void SMC_outw(u16 val, void __iomem *ioaddr, int reg) #define SMC_outsb(a, r, p, l) writesb((a) + (r), p, (l)) #define SMC_IRQ_FLAGS (-1) /* from resource */ -#elif defined(CONFIG_MACH_LOGICPD_PXA270) +#elif defined(CONFIG_MACH_LOGICPD_PXA270) \ + || defined(CONFIG_MACH_NOMADIK_8815NHK) #define SMC_CAN_USE_8BIT 0 #define SMC_CAN_USE_16BIT 1 -- cgit v1.2.3 From c587aea951a56d29741a3cef4ea3e142c93b3207 Mon Sep 17 00:00:00 2001 From: Xiaotian Feng Date: Thu, 23 Jul 2009 23:06:32 +0000 Subject: net/bridge: use kobject_put to release kobject in br_add_if error path kobject_init_and_add will alloc memory for kobj->name, so in br_add_if error path, simply use kobject_del will not free memory for kobj->name. Fix by using kobject_put instead, kobject_put will internally calls kobject_del and frees memory for kobj->name. Signed-off-by: Xiaotian Feng Acked-by: Stephen Hemminger Signed-off-by: David S. Miller --- net/bridge/br_if.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/net/bridge/br_if.c b/net/bridge/br_if.c index 8a96672e2c5..eb404dc3ed6 100644 --- a/net/bridge/br_if.c +++ b/net/bridge/br_if.c @@ -424,7 +424,7 @@ int br_add_if(struct net_bridge *br, struct net_device *dev) err2: br_fdb_delete_by_port(br, p, 1); err1: - kobject_del(&p->kobj); + kobject_put(&p->kobj); err0: dev_set_promiscuity(dev, -1); put_back: -- cgit v1.2.3 From c8a5a658b826508c7c61b57e9a590f7b8760fb51 Mon Sep 17 00:00:00 2001 From: Dhananjay Phadke Date: Sun, 26 Jul 2009 20:17:21 -0700 Subject: netxen: reset ring consumer during cleanup Reset consumer of status rings to 0 when cleaning up sw resources. Status rings are not deleted during suspend since they have napi objects. This ensures correct rx processing across suspen-resume. Signed-off-by: Dhananjay Phadke Signed-off-by: David S. Miller --- drivers/net/netxen/netxen_nic_init.c | 7 +++++++ 1 file changed, 7 insertions(+) diff --git a/drivers/net/netxen/netxen_nic_init.c b/drivers/net/netxen/netxen_nic_init.c index 5d3343ef3d8..7acf204e38c 100644 --- a/drivers/net/netxen/netxen_nic_init.c +++ b/drivers/net/netxen/netxen_nic_init.c @@ -184,6 +184,13 @@ void netxen_free_sw_resources(struct netxen_adapter *adapter) kfree(recv_ctx->rds_rings); skip_rds: + if (recv_ctx->sds_rings == NULL) + goto skip_sds; + + for(ring = 0; ring < adapter->max_sds_rings; ring++) + recv_ctx->sds_rings[ring].consumer = 0; + +skip_sds: if (adapter->tx_ring == NULL) return; -- cgit v1.2.3 From ca52efd5490f97f396d3c5863ba714624f272033 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?fran=C3=A7ois=20romieu?= Date: Fri, 24 Jul 2009 12:34:19 +0000 Subject: r8169: WakeOnLan fix for the 8168 MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit More stuff for http://bugzilla.kernel.org/show_bug.cgi?id=9512 Some 8168 are unable to WoL when receiving is not enabled (plain old 8169 do not seem to care). It is not exactly pretty to leave the receiver enabled but we should now enable DMA late enough for it to be safe. Some late stage boot failure due to pxe and friends may benefit from the delayed enabling of bus-mastering as well. Signed-off-by: Francois Romieu Tested-by: Jaromír Cápík Cc: Edward Hsu --- drivers/net/r8169.c | 13 +++++++++++-- 1 file changed, 11 insertions(+), 2 deletions(-) diff --git a/drivers/net/r8169.c b/drivers/net/r8169.c index 4b53b58d75f..b82780d805f 100644 --- a/drivers/net/r8169.c +++ b/drivers/net/r8169.c @@ -2060,8 +2060,6 @@ rtl8169_init_one(struct pci_dev *pdev, const struct pci_device_id *ent) } } - pci_set_master(pdev); - /* ioremap MMIO region */ ioaddr = ioremap(pci_resource_start(pdev, region), R8169_REGS_SIZE); if (!ioaddr) { @@ -2089,6 +2087,8 @@ rtl8169_init_one(struct pci_dev *pdev, const struct pci_device_id *ent) RTL_W16(IntrStatus, 0xffff); + pci_set_master(pdev); + /* Identify chip attached to board */ rtl8169_get_mac_version(tp, ioaddr); @@ -3874,6 +3874,15 @@ static void rtl_shutdown(struct pci_dev *pdev) spin_unlock_irq(&tp->lock); if (system_state == SYSTEM_POWER_OFF) { + /* WoL fails with some 8168 when the receiver is disabled. */ + if (tp->features & RTL_FEATURE_WOL) { + pci_clear_master(pdev); + + RTL_W8(ChipCmd, CmdRxEnb); + /* PCI commit */ + RTL_R8(ChipCmd); + } + pci_wake_from_d3(pdev, true); pci_set_power_state(pdev, PCI_D3hot); } -- cgit v1.2.3 From 8bae1b2b13beb4cf4c0f119f97640503c2b74b0f Mon Sep 17 00:00:00 2001 From: Don Skidmore Date: Thu, 23 Jul 2009 18:00:39 +0000 Subject: ixgbe: fix for 82599 errata marking UDP checksum errors There is an 82599 errata that UDP frames with a zero checksum are incorrectly marked as checksum invalid by the hardware. This was leading to misleading hw_csum_rx_error counts. This patch adds a test around this counter increase for this condition. Signed-off-by: Don Skidmore Signed-off-by: Jeff Kirsher Signed-off-by: David S. Miller --- drivers/net/ixgbe/ixgbe_main.c | 17 +++++++++++++++-- 1 file changed, 15 insertions(+), 2 deletions(-) diff --git a/drivers/net/ixgbe/ixgbe_main.c b/drivers/net/ixgbe/ixgbe_main.c index 68877599f6d..200454f30f6 100644 --- a/drivers/net/ixgbe/ixgbe_main.c +++ b/drivers/net/ixgbe/ixgbe_main.c @@ -511,8 +511,11 @@ static void ixgbe_receive_skb(struct ixgbe_q_vector *q_vector, * @skb: skb currently being received and modified **/ static inline void ixgbe_rx_checksum(struct ixgbe_adapter *adapter, - u32 status_err, struct sk_buff *skb) + union ixgbe_adv_rx_desc *rx_desc, + struct sk_buff *skb) { + u32 status_err = le32_to_cpu(rx_desc->wb.upper.status_error); + skb->ip_summed = CHECKSUM_NONE; /* Rx csum disabled */ @@ -530,6 +533,16 @@ static inline void ixgbe_rx_checksum(struct ixgbe_adapter *adapter, return; if (status_err & IXGBE_RXDADV_ERR_TCPE) { + u16 pkt_info = rx_desc->wb.lower.lo_dword.hs_rss.pkt_info; + + /* + * 82599 errata, UDP frames with a 0 checksum can be marked as + * checksum errors. + */ + if ((pkt_info & IXGBE_RXDADV_PKTTYPE_UDP) && + (adapter->hw.mac.type == ixgbe_mac_82599EB)) + return; + adapter->hw_csum_rx_error++; return; } @@ -803,7 +816,7 @@ static bool ixgbe_clean_rx_irq(struct ixgbe_q_vector *q_vector, goto next_desc; } - ixgbe_rx_checksum(adapter, staterr, skb); + ixgbe_rx_checksum(adapter, rx_desc, skb); /* probably a little skewed due to removing CRC */ total_rx_bytes += skb->len; -- cgit v1.2.3 From efffde36d20613d91a5ea9529b03f477077f41ea Mon Sep 17 00:00:00 2001 From: Michal Simek Date: Thu, 9 Jul 2009 11:33:39 +0200 Subject: microblaze: Define tlb_flush macro This fix remove bug which we had till now in all Microblaze MMU code. Primary tested on mmap01 LTP test. We forget to flush invalid tlb which were changed - we used them and there were wrong old data which wasn't correct. Signed-off-by: Michal Simek --- arch/microblaze/include/asm/tlb.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/microblaze/include/asm/tlb.h b/arch/microblaze/include/asm/tlb.h index c472d280113..e8abd4a0349 100644 --- a/arch/microblaze/include/asm/tlb.h +++ b/arch/microblaze/include/asm/tlb.h @@ -11,7 +11,7 @@ #ifndef _ASM_MICROBLAZE_TLB_H #define _ASM_MICROBLAZE_TLB_H -#define tlb_flush(tlb) do {} while (0) +#define tlb_flush(tlb) flush_tlb_mm((tlb)->mm) #include -- cgit v1.2.3 From 1170902b343053f50d4caf8ec2aa745fd0ce5c84 Mon Sep 17 00:00:00 2001 From: Huang Weiyi Date: Sat, 11 Jul 2009 09:32:08 +0800 Subject: microblaze: remove duplicated #include Remove duplicated #include('s) in arch/microblaze/include/asm/io.h Signed-off-by: Huang Weiyi Signed-off-by: Michal Simek --- arch/microblaze/include/asm/io.h | 1 - 1 file changed, 1 deletion(-) diff --git a/arch/microblaze/include/asm/io.h b/arch/microblaze/include/asm/io.h index 5c173424d07..7c3ec13b44d 100644 --- a/arch/microblaze/include/asm/io.h +++ b/arch/microblaze/include/asm/io.h @@ -14,7 +14,6 @@ #include #include #include -#include #include /* Get struct page {...} */ -- cgit v1.2.3 From 909964ec89ba466d75d53250d5738d1891cc1a3d Mon Sep 17 00:00:00 2001 From: John Williams Date: Mon, 22 Jun 2009 14:02:09 +1000 Subject: microblaze: Final support for statically linked DTB If r7 is zero at kernel boot, or does not point to a valid DTB, then we fall back to a DTB (assumed to be) linked statically in the kernel, instead of blindly copying bogus cruft into the kernel DTB memory region Signed-off-by: John Williams Signed-off-by: Michal Simek --- arch/microblaze/include/asm/prom.h | 23 +++++++++++++---------- arch/microblaze/kernel/head.S | 15 +++++++++++---- arch/microblaze/kernel/setup.c | 3 ++- 3 files changed, 26 insertions(+), 15 deletions(-) diff --git a/arch/microblaze/include/asm/prom.h b/arch/microblaze/include/asm/prom.h index 20f7b3a926e..37e6f305a68 100644 --- a/arch/microblaze/include/asm/prom.h +++ b/arch/microblaze/include/asm/prom.h @@ -16,6 +16,18 @@ #define _ASM_MICROBLAZE_PROM_H #ifdef __KERNEL__ +/* Definitions used by the flattened device tree */ +#define OF_DT_HEADER 0xd00dfeed /* marker */ +#define OF_DT_BEGIN_NODE 0x1 /* Start of node, full name */ +#define OF_DT_END_NODE 0x2 /* End node */ +#define OF_DT_PROP 0x3 /* Property: name off, size, content */ +#define OF_DT_NOP 0x4 /* nop */ +#define OF_DT_END 0x9 + +#define OF_DT_VERSION 0x10 + +#ifndef __ASSEMBLY__ + #include #include #include @@ -29,16 +41,6 @@ #define of_prop_cmp(s1, s2) strcmp((s1), (s2)) #define of_node_cmp(s1, s2) strcasecmp((s1), (s2)) -/* Definitions used by the flattened device tree */ -#define OF_DT_HEADER 0xd00dfeed /* marker */ -#define OF_DT_BEGIN_NODE 0x1 /* Start of node, full name */ -#define OF_DT_END_NODE 0x2 /* End node */ -#define OF_DT_PROP 0x3 /* Property: name off, size, content */ -#define OF_DT_NOP 0x4 /* nop */ -#define OF_DT_END 0x9 - -#define OF_DT_VERSION 0x10 - /* * This is what gets passed to the kernel by prom_init or kexec * @@ -309,5 +311,6 @@ extern void __iomem *of_iomap(struct device_node *device, int index); */ #include +#endif /* __ASSEMBLY__ */ #endif /* __KERNEL__ */ #endif /* _ASM_MICROBLAZE_PROM_H */ diff --git a/arch/microblaze/kernel/head.S b/arch/microblaze/kernel/head.S index e568d6ec621..815bcaae99c 100644 --- a/arch/microblaze/kernel/head.S +++ b/arch/microblaze/kernel/head.S @@ -31,6 +31,7 @@ #include #include #include +#include /* for OF_DT_HEADER */ #ifdef CONFIG_MMU #include /* COMMAND_LINE_SIZE */ @@ -54,11 +55,16 @@ ENTRY(_start) andi r1, r1, ~2 mts rmsr, r1 -/* save fdt to kernel location */ -/* r7 stores pointer to fdt blob */ - beqi r7, no_fdt_arg +/* r7 may point to an FDT, or there may be one linked in. + if it's in r7, we've got to save it away ASAP. + We ensure r7 points to a valid FDT, just in case the bootloader + is broken or non-existent */ + beqi r7, no_fdt_arg /* NULL pointer? don't copy */ + lw r11, r0, r7 /* Does r7 point to a */ + rsubi r11, r11, OF_DT_HEADER /* valid FDT? */ + bnei r11, no_fdt_arg /* No - get out of here */ or r11, r0, r0 /* incremment */ - ori r4, r0, TOPHYS(_fdt_start) /* save bram context */ + ori r4, r0, TOPHYS(_fdt_start) ori r3, r0, (0x4000 - 4) _copy_fdt: lw r12, r7, r11 /* r12 = r7 + r11 */ @@ -67,6 +73,7 @@ _copy_fdt: bgtid r3, _copy_fdt /* loop for all entries */ addik r3, r3, -4 /* descrement loop */ no_fdt_arg: + add r7, r0, r0 /* Clear r7, just to be sure */ #ifdef CONFIG_MMU diff --git a/arch/microblaze/kernel/setup.c b/arch/microblaze/kernel/setup.c index 8709bea0960..59a383621b2 100644 --- a/arch/microblaze/kernel/setup.c +++ b/arch/microblaze/kernel/setup.c @@ -139,7 +139,8 @@ void __init machine_early_init(const char *cmdline, unsigned int ram, #endif early_printk("Ramdisk addr 0x%08x, FDT 0x%08x\n", ram, fdt); - printk(KERN_NOTICE "Found FDT at 0x%08x\n", fdt); + if(fdt) + printk(KERN_NOTICE "Found FDT at 0x%08x\n", fdt); #ifdef CONFIG_MTD_UCLINUX early_printk("Found romfs @ 0x%08x (0x%08x)\n", -- cgit v1.2.3 From 74510f2a2751ed56b5ab099b2e3b7697b91aa77e Mon Sep 17 00:00:00 2001 From: Michal Simek Date: Mon, 22 Jun 2009 10:28:40 +0200 Subject: microblaze: Add messages about FDT blob Print accurate message about place where FDT blob is. Signed-off-by: Michal Simek --- arch/microblaze/kernel/setup.c | 9 ++++++--- 1 file changed, 6 insertions(+), 3 deletions(-) diff --git a/arch/microblaze/kernel/setup.c b/arch/microblaze/kernel/setup.c index 59a383621b2..2a97bf513b6 100644 --- a/arch/microblaze/kernel/setup.c +++ b/arch/microblaze/kernel/setup.c @@ -138,9 +138,12 @@ void __init machine_early_init(const char *cmdline, unsigned int ram, setup_early_printk(NULL); #endif - early_printk("Ramdisk addr 0x%08x, FDT 0x%08x\n", ram, fdt); - if(fdt) - printk(KERN_NOTICE "Found FDT at 0x%08x\n", fdt); + early_printk("Ramdisk addr 0x%08x, ", ram); + if (fdt) + early_printk("FDT at 0x%08x\n", fdt); + else + early_printk("Compiled-in FDT at 0x%08x\n", + (unsigned int)_fdt_start); #ifdef CONFIG_MTD_UCLINUX early_printk("Found romfs @ 0x%08x (0x%08x)\n", -- cgit v1.2.3 From a69cb8c4662dd0a7b01b32a9165b1a1697068f19 Mon Sep 17 00:00:00 2001 From: Michal Simek Date: Mon, 22 Jun 2009 10:55:40 +0200 Subject: microblaze: Not to clear r7 after copying DTB to kernel I can't clear r7 because if I do it I lose information where DTB come from. Signed-off-by: Michal Simek --- arch/microblaze/kernel/head.S | 1 - 1 file changed, 1 deletion(-) diff --git a/arch/microblaze/kernel/head.S b/arch/microblaze/kernel/head.S index 815bcaae99c..3c4d4a2803e 100644 --- a/arch/microblaze/kernel/head.S +++ b/arch/microblaze/kernel/head.S @@ -73,7 +73,6 @@ _copy_fdt: bgtid r3, _copy_fdt /* loop for all entries */ addik r3, r3, -4 /* descrement loop */ no_fdt_arg: - add r7, r0, r0 /* Clear r7, just to be sure */ #ifdef CONFIG_MMU -- cgit v1.2.3 From ea3fd1466f81a851452bf7f34ccb9b5058e4793c Mon Sep 17 00:00:00 2001 From: Michal Simek Date: Mon, 22 Jun 2009 12:31:55 +0200 Subject: microblaze: Clear print messages for DTB passing via r7 It is necessary to zeroed r7 when r7 points to bad dtb - this caused that we have correct messages about compiled-in dtb or passing via r7 Signed-off-by: Michal Simek --- arch/microblaze/kernel/head.S | 3 +++ 1 file changed, 3 insertions(+) diff --git a/arch/microblaze/kernel/head.S b/arch/microblaze/kernel/head.S index 3c4d4a2803e..e41c6ce2a7b 100644 --- a/arch/microblaze/kernel/head.S +++ b/arch/microblaze/kernel/head.S @@ -62,7 +62,10 @@ ENTRY(_start) beqi r7, no_fdt_arg /* NULL pointer? don't copy */ lw r11, r0, r7 /* Does r7 point to a */ rsubi r11, r11, OF_DT_HEADER /* valid FDT? */ + beqi r11, _prepare_copy_fdt + or r7, r0, r0 /* clear R7 when not valid DTB */ bnei r11, no_fdt_arg /* No - get out of here */ +_prepare_copy_fdt: or r11, r0, r0 /* incremment */ ori r4, r0, TOPHYS(_fdt_start) ori r3, r0, (0x4000 - 4) -- cgit v1.2.3 From 7bcb63b21327427b130edeb6e6ad44ee260b3043 Mon Sep 17 00:00:00 2001 From: Michal Simek Date: Mon, 13 Jul 2009 16:46:54 +0200 Subject: microblaze: Fix put_user macro for 64bits arguments For 64bits arguments gcc caused that put_user macro works with wrong value because of optimalization. Adding volatile caused that gcc not optimized it. It is possible to use (as Blackfin do) two put_user macros with 32bits arguments but there is one more instruction which is due to duplication zero return value which is called put_user_asm macro. Signed-off-by: Michal Simek --- arch/microblaze/include/asm/uaccess.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/microblaze/include/asm/uaccess.h b/arch/microblaze/include/asm/uaccess.h index 65adad61e7e..5431b4631a7 100644 --- a/arch/microblaze/include/asm/uaccess.h +++ b/arch/microblaze/include/asm/uaccess.h @@ -189,7 +189,7 @@ extern long strnlen_user(const char *src, long count); #define __put_user(x, ptr) \ ({ \ - __typeof__(*(ptr)) __gu_val = x; \ + __typeof__(*(ptr)) volatile __gu_val = (x); \ long __gu_err = 0; \ switch (sizeof(__gu_val)) { \ case 1: \ -- cgit v1.2.3 From f14d6f7c31c73a902a6b567dc719128e74603902 Mon Sep 17 00:00:00 2001 From: Michal Simek Date: Wed, 15 Jul 2009 13:39:35 +0200 Subject: microblaze: Add _PAGE_FILE macros to pgtable.h We need to define _PAGE_FILE macro and change pte functions. Microblaze use the same MMU as PowerPC that's why we define _PAGE_FILE in the same style. This change fixed remap_file_pages01 LTP test. Signed-off-by: Michal Simek --- arch/microblaze/include/asm/pgtable.h | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/arch/microblaze/include/asm/pgtable.h b/arch/microblaze/include/asm/pgtable.h index 4c57a586a98..cc3a4dfc3ea 100644 --- a/arch/microblaze/include/asm/pgtable.h +++ b/arch/microblaze/include/asm/pgtable.h @@ -185,6 +185,7 @@ static inline pte_t pte_mkspecial(pte_t pte) { return pte; } /* Definitions for MicroBlaze. */ #define _PAGE_GUARDED 0x001 /* G: page is guarded from prefetch */ +#define _PAGE_FILE 0x001 /* when !present: nonlinear file mapping */ #define _PAGE_PRESENT 0x002 /* software: PTE contains a translation */ #define _PAGE_NO_CACHE 0x004 /* I: caching is inhibited */ #define _PAGE_WRITETHRU 0x008 /* W: caching is write-through */ @@ -320,8 +321,7 @@ static inline int pte_write(pte_t pte) { return pte_val(pte) & _PAGE_RW; } static inline int pte_exec(pte_t pte) { return pte_val(pte) & _PAGE_EXEC; } static inline int pte_dirty(pte_t pte) { return pte_val(pte) & _PAGE_DIRTY; } static inline int pte_young(pte_t pte) { return pte_val(pte) & _PAGE_ACCESSED; } -/* FIXME */ -static inline int pte_file(pte_t pte) { return 0; } +static inline int pte_file(pte_t pte) { return pte_val(pte) & _PAGE_FILE; } static inline void pte_uncache(pte_t pte) { pte_val(pte) |= _PAGE_NO_CACHE; } static inline void pte_cache(pte_t pte) { pte_val(pte) &= ~_PAGE_NO_CACHE; } @@ -488,7 +488,7 @@ static inline pmd_t *pmd_offset(pgd_t *dir, unsigned long address) /* Encode and decode a nonlinear file mapping entry */ #define PTE_FILE_MAX_BITS 29 #define pte_to_pgoff(pte) (pte_val(pte) >> 3) -#define pgoff_to_pte(off) ((pte_t) { ((off) << 3) }) +#define pgoff_to_pte(off) ((pte_t) { ((off) << 3) | _PAGE_FILE }) extern pgd_t swapper_pg_dir[PTRS_PER_PGD]; -- cgit v1.2.3 From f10eca6e107fd223c24393c09c40b916d2b3c427 Mon Sep 17 00:00:00 2001 From: Michal Simek Date: Thu, 16 Jul 2009 16:00:49 +0200 Subject: microblaze: Fix do_page_fault for no context Calling fixup when we are in kernel mode. This prevent fault for copy_to/from_user. This fault was find thanks to writev01/03/04 LTP tests. Signed-off-by: Michal Simek --- arch/microblaze/mm/fault.c | 13 ++++--------- 1 file changed, 4 insertions(+), 9 deletions(-) diff --git a/arch/microblaze/mm/fault.c b/arch/microblaze/mm/fault.c index 956607a63f4..398c7611735 100644 --- a/arch/microblaze/mm/fault.c +++ b/arch/microblaze/mm/fault.c @@ -122,15 +122,10 @@ void do_page_fault(struct pt_regs *regs, unsigned long address, } #endif /* CONFIG_KGDB */ - if (in_atomic() || mm == NULL) { - /* FIXME */ - if (kernel_mode(regs)) { - printk(KERN_EMERG - "Page fault in kernel mode - Oooou!!! pid %d\n", - current->pid); - _exception(SIGSEGV, regs, code, address); - return; - } + if (in_atomic() || !mm) { + if (kernel_mode(regs)) + goto bad_area_nosemaphore; + /* in_atomic() in user mode is really bad, as is current->mm == NULL. */ printk(KERN_EMERG "Page fault in user mode with " -- cgit v1.2.3 From 94ad8eb854cbc1cf875a318f9b97314ddc6b1560 Mon Sep 17 00:00:00 2001 From: Michal Simek Date: Tue, 21 Jul 2009 12:47:04 +0200 Subject: microblaze: Detect new Microblaze 7.20 versions Signed-off-by: Michal Simek --- arch/microblaze/kernel/cpu/cpuinfo.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/arch/microblaze/kernel/cpu/cpuinfo.c b/arch/microblaze/kernel/cpu/cpuinfo.c index a10bea119b9..c411c6757de 100644 --- a/arch/microblaze/kernel/cpu/cpuinfo.c +++ b/arch/microblaze/kernel/cpu/cpuinfo.c @@ -26,6 +26,8 @@ const struct cpu_ver_key cpu_ver_lookup[] = { {"7.10.b", 0x09}, {"7.10.c", 0x0a}, {"7.10.d", 0x0b}, + {"7.20.a", 0x0c}, + {"7.20.b", 0x0d}, /* FIXME There is no keycode defined in MBV for these versions */ {"2.10.a", 0x10}, {"3.00.a", 0x20}, -- cgit v1.2.3 From 3863dbceac7e69642b95f43de1c12c6236fdbe5b Mon Sep 17 00:00:00 2001 From: Michal Simek Date: Tue, 21 Jul 2009 12:48:01 +0200 Subject: microblaze: Support unaligned address for put/get_user macros This patch add support for cases where load/store instruction in put/get_user macro gets unaligned pointer to data and this address is not valid. I prevent all cases which can failed. I had to disable first stage of unaligned handler which is used only for noMMU kernel and the whole work is done when interrupt is enabled. You have enable HW support for detect unaligned access in Microblaze. This patch fixed three LTP tests: getpeername01, getsockname01, socketpair01 Signed-off-by: Michal Simek --- arch/microblaze/kernel/hw_exception_handler.S | 109 +++++++++++--------------- arch/microblaze/mm/fault.c | 2 +- 2 files changed, 47 insertions(+), 64 deletions(-) diff --git a/arch/microblaze/kernel/hw_exception_handler.S b/arch/microblaze/kernel/hw_exception_handler.S index 9d591cd74fc..3288c973767 100644 --- a/arch/microblaze/kernel/hw_exception_handler.S +++ b/arch/microblaze/kernel/hw_exception_handler.S @@ -74,6 +74,7 @@ #include #include +#include #include /* Helpful Macros */ @@ -428,19 +429,9 @@ handle_unaligned_ex: mfs r17, rbtr; /* ESR[DS] set - return address in BTR */ nop _no_delayslot: -#endif - -#ifdef CONFIG_MMU - /* Check if unaligned address is last on a 4k page */ - andi r5, r4, 0xffc - xori r5, r5, 0xffc - bnei r5, _unaligned_ex2 - _unaligned_ex1: - RESTORE_STATE; -/* Another page must be accessed or physical address not in page table */ - bri unaligned_data_trap - - _unaligned_ex2: + /* jump to high level unaligned handler */ + RESTORE_STATE; + bri unaligned_data_trap #endif andi r6, r3, 0x3E0; /* Mask and extract the register operand */ srl r6, r6; /* r6 >> 5 */ @@ -450,45 +441,6 @@ _no_delayslot: srl r6, r6; /* Store the register operand in a temporary location */ sbi r6, r0, TOPHYS(ex_reg_op); -#ifdef CONFIG_MMU - /* Get physical address */ - /* If we are faulting a kernel address, we have to use the - * kernel page tables. - */ - ori r5, r0, CONFIG_KERNEL_START - cmpu r5, r4, r5 - bgti r5, _unaligned_ex3 - ori r5, r0, swapper_pg_dir - bri _unaligned_ex4 - - /* Get the PGD for the current thread. */ -_unaligned_ex3: /* user thread */ - addi r5 ,CURRENT_TASK, TOPHYS(0); /* get current task address */ - lwi r5, r5, TASK_THREAD + PGDIR -_unaligned_ex4: - tophys(r5,r5) - BSRLI(r6,r4,20) /* Create L1 (pgdir/pmd) address */ - andi r6, r6, 0xffc -/* Assume pgdir aligned on 4K boundary, no need for "andi r5,r5,0xfffff003" */ - or r5, r5, r6 - lwi r6, r5, 0 /* Get L1 entry */ - andi r5, r6, 0xfffff000 /* Extract L2 (pte) base address. */ - beqi r5, _unaligned_ex1 /* Bail if no table */ - - tophys(r5,r5) - BSRLI(r6,r4,10) /* Compute PTE address */ - andi r6, r6, 0xffc - andi r5, r5, 0xfffff003 - or r5, r5, r6 - lwi r5, r5, 0 /* Get Linux PTE */ - - andi r6, r5, _PAGE_PRESENT - beqi r6, _unaligned_ex1 /* Bail if no page */ - - andi r5, r5, 0xfffff000 /* Extract RPN */ - andi r4, r4, 0x00000fff /* Extract offset */ - or r4, r4, r5 /* Create physical address */ -#endif /* CONFIG_MMU */ andi r6, r3, 0x400; /* Extract ESR[S] */ bnei r6, ex_sw; @@ -959,15 +911,15 @@ _unaligned_data_exception: andi r6, r3, 0x800; /* Extract ESR[W] - delay slot */ ex_lw_vm: beqid r6, ex_lhw_vm; - lbui r5, r4, 0; /* Exception address in r4 - delay slot */ +load1: lbui r5, r4, 0; /* Exception address in r4 - delay slot */ /* Load a word, byte-by-byte from destination address and save it in tmp space*/ la r6, r0, ex_tmp_data_loc_0; sbi r5, r6, 0; - lbui r5, r4, 1; +load2: lbui r5, r4, 1; sbi r5, r6, 1; - lbui r5, r4, 2; +load3: lbui r5, r4, 2; sbi r5, r6, 2; - lbui r5, r4, 3; +load4: lbui r5, r4, 3; sbi r5, r6, 3; brid ex_lw_tail_vm; /* Get the destination register value into r3 - delay slot */ @@ -977,7 +929,7 @@ ex_lhw_vm: * save it in tmp space */ la r6, r0, ex_tmp_data_loc_0; sbi r5, r6, 0; - lbui r5, r4, 1; +load5: lbui r5, r4, 1; sbi r5, r6, 1; lhui r3, r6, 0; /* Get the destination register value into r3 */ ex_lw_tail_vm: @@ -996,22 +948,53 @@ ex_sw_tail_vm: swi r3, r5, 0; /* Get the word - delay slot */ /* Store the word, byte-by-byte into destination address */ lbui r3, r5, 0; - sbi r3, r4, 0; +store1: sbi r3, r4, 0; lbui r3, r5, 1; - sbi r3, r4, 1; +store2: sbi r3, r4, 1; lbui r3, r5, 2; - sbi r3, r4, 2; +store3: sbi r3, r4, 2; lbui r3, r5, 3; brid ret_from_exc; - sbi r3, r4, 3; /* Delay slot */ +store4: sbi r3, r4, 3; /* Delay slot */ ex_shw_vm: /* Store the lower half-word, byte-by-byte into destination address */ lbui r3, r5, 2; - sbi r3, r4, 0; +store5: sbi r3, r4, 0; lbui r3, r5, 3; brid ret_from_exc; - sbi r3, r4, 1; /* Delay slot */ +store6: sbi r3, r4, 1; /* Delay slot */ ex_sw_end_vm: /* Exception handling of store word, ends. */ + +/* We have to prevent cases that get/put_user macros get unaligned pointer + * to bad page area. We have to find out which origin instruction caused it + * and called fixup for that origin instruction not instruction in unaligned + * handler */ +ex_unaligned_fixup: + ori r5, r7, 0 /* setup pointer to pt_regs */ + lwi r6, r7, PT_PC; /* faulting address is one instruction above */ + addik r6, r6, -4 /* for finding proper fixup */ + swi r6, r7, PT_PC; /* a save back it to PT_PC */ + addik r7, r0, SIGSEGV + /* call bad_page_fault for finding aligned fixup, fixup address is saved + * in PT_PC which is used as return address from exception */ + la r15, r0, ret_from_exc-8 /* setup return address */ + brid bad_page_fault + nop + +/* We prevent all load/store because it could failed any attempt to access */ +.section __ex_table,"a"; + .word load1,ex_unaligned_fixup; + .word load2,ex_unaligned_fixup; + .word load3,ex_unaligned_fixup; + .word load4,ex_unaligned_fixup; + .word load5,ex_unaligned_fixup; + .word store1,ex_unaligned_fixup; + .word store2,ex_unaligned_fixup; + .word store3,ex_unaligned_fixup; + .word store4,ex_unaligned_fixup; + .word store5,ex_unaligned_fixup; + .word store6,ex_unaligned_fixup; +.previous; .end _unaligned_data_exception #endif /* CONFIG_MMU */ diff --git a/arch/microblaze/mm/fault.c b/arch/microblaze/mm/fault.c index 398c7611735..d9d249a66ff 100644 --- a/arch/microblaze/mm/fault.c +++ b/arch/microblaze/mm/fault.c @@ -69,7 +69,7 @@ static int store_updates_sp(struct pt_regs *regs) * It is called from do_page_fault above and from some of the procedures * in traps.c. */ -static void bad_page_fault(struct pt_regs *regs, unsigned long address, int sig) +void bad_page_fault(struct pt_regs *regs, unsigned long address, int sig) { const struct exception_table_entry *fixup; /* MS: no context */ -- cgit v1.2.3 From bfc0ca0d33e24fca5b89acb378a8a9712ffe22b6 Mon Sep 17 00:00:00 2001 From: Arnd Bergmann Date: Thu, 18 Jun 2009 19:55:35 +0200 Subject: microblaze: remove sys_ipc The ipc system call is now unused in microblaze, as the system call table points directly to the indidual system calls for IPC. Signed-off-by: Arnd Bergmann Signed-off-by: Michal Simek --- arch/microblaze/kernel/sys_microblaze.c | 99 --------------------------------- arch/microblaze/kernel/syscall_table.S | 2 +- 2 files changed, 1 insertion(+), 100 deletions(-) diff --git a/arch/microblaze/kernel/sys_microblaze.c b/arch/microblaze/kernel/sys_microblaze.c index e000bce09b2..b96f1682bb2 100644 --- a/arch/microblaze/kernel/sys_microblaze.c +++ b/arch/microblaze/kernel/sys_microblaze.c @@ -33,105 +33,6 @@ #include #include -/* - * sys_ipc() is the de-multiplexer for the SysV IPC calls.. - * - * This is really horribly ugly. This will be remove with new toolchain. - */ -asmlinkage long -sys_ipc(uint call, int first, int second, int third, void *ptr, long fifth) -{ - int version, ret; - - version = call >> 16; /* hack for backward compatibility */ - call &= 0xffff; - - ret = -EINVAL; - switch (call) { - case SEMOP: - ret = sys_semop(first, (struct sembuf *)ptr, second); - break; - case SEMGET: - ret = sys_semget(first, second, third); - break; - case SEMCTL: - { - union semun fourth; - - if (!ptr) - break; - ret = (access_ok(VERIFY_READ, ptr, sizeof(long)) ? 0 : -EFAULT) - || (get_user(fourth.__pad, (void **)ptr)) ; - if (ret) - break; - ret = sys_semctl(first, second, third, fourth); - break; - } - case MSGSND: - ret = sys_msgsnd(first, (struct msgbuf *) ptr, second, third); - break; - case MSGRCV: - switch (version) { - case 0: { - struct ipc_kludge tmp; - - if (!ptr) - break; - ret = (access_ok(VERIFY_READ, ptr, sizeof(tmp)) - ? 0 : -EFAULT) || copy_from_user(&tmp, - (struct ipc_kludge *) ptr, sizeof(tmp)); - if (ret) - break; - ret = sys_msgrcv(first, tmp.msgp, second, tmp.msgtyp, - third); - break; - } - default: - ret = sys_msgrcv(first, (struct msgbuf *) ptr, - second, fifth, third); - break; - } - break; - case MSGGET: - ret = sys_msgget((key_t) first, second); - break; - case MSGCTL: - ret = sys_msgctl(first, second, (struct msqid_ds *) ptr); - break; - case SHMAT: - switch (version) { - default: { - ulong raddr; - ret = access_ok(VERIFY_WRITE, (ulong *) third, - sizeof(ulong)) ? 0 : -EFAULT; - if (ret) - break; - ret = do_shmat(first, (char *) ptr, second, &raddr); - if (ret) - break; - ret = put_user(raddr, (ulong *) third); - break; - } - case 1: /* iBCS2 emulator entry point */ - if (!segment_eq(get_fs(), get_ds())) - break; - ret = do_shmat(first, (char *) ptr, second, - (ulong *) third); - break; - } - break; - case SHMDT: - ret = sys_shmdt((char *)ptr); - break; - case SHMGET: - ret = sys_shmget(first, second, third); - break; - case SHMCTL: - ret = sys_shmctl(first, second, (struct shmid_ds *) ptr); - break; - } - return ret; -} asmlinkage long microblaze_vfork(struct pt_regs *regs) { diff --git a/arch/microblaze/kernel/syscall_table.S b/arch/microblaze/kernel/syscall_table.S index 31b32a6c5f4..216db817beb 100644 --- a/arch/microblaze/kernel/syscall_table.S +++ b/arch/microblaze/kernel/syscall_table.S @@ -121,7 +121,7 @@ ENTRY(sys_call_table) .long sys_wait4 .long sys_swapoff /* 115 */ .long sys_sysinfo - .long sys_ipc + .long sys_ni_syscall /* old sys_ipc */ .long sys_fsync .long sys_ni_syscall /* sys_sigreturn_wrapper */ .long sys_clone /* 120 */ -- cgit v1.2.3 From fadf2e60a6dc7267658fa0c9e3bef13c699c7e1f Mon Sep 17 00:00:00 2001 From: John Williams Date: Thu, 23 Jul 2009 14:56:49 +1000 Subject: microblaze: Get module loading working New reloc type R_MICROBLAZE_32_PCREL_LO requires a null handler (no work to do). Remove legacy hack for broken linker pre gcc-4.1.1, that required us to extract an offset from the code, add it to the addend, then rewrite the instruction. Fixup the invalid reloc type error output. Boot tested with the xilinx_emaclite ethernet driver. Signed-off-by: John Williams Signed-off-by: Michal Simek --- arch/microblaze/kernel/module.c | 15 ++++++++++----- 1 file changed, 10 insertions(+), 5 deletions(-) diff --git a/arch/microblaze/kernel/module.c b/arch/microblaze/kernel/module.c index 51414171326..93a3871ea54 100644 --- a/arch/microblaze/kernel/module.c +++ b/arch/microblaze/kernel/module.c @@ -57,7 +57,6 @@ int apply_relocate_add(Elf32_Shdr *sechdrs, const char *strtab, Elf32_Rela *rela = (void *)sechdrs[relsec].sh_addr; Elf32_Sym *sym; unsigned long int *location; - unsigned long int locoffs; unsigned long int value; #if __GNUC__ < 4 unsigned long int old_value; @@ -113,10 +112,12 @@ int apply_relocate_add(Elf32_Shdr *sechdrs, const char *strtab, break; case R_MICROBLAZE_64_PCREL: - locoffs = (location[0] & 0xFFFF) << 16 | +#if __GNUC__ < 4 + old_value = (location[0] & 0xFFFF) << 16 | (location[1] & 0xFFFF); - value -= (unsigned long int)(location) + 4 + - locoffs; + value -= old_value; +#endif + value -= (unsigned long int)(location) + 4; location[0] = (location[0] & 0xFFFF0000) | (value >> 16); location[1] = (location[1] & 0xFFFF0000) | @@ -125,6 +126,10 @@ int apply_relocate_add(Elf32_Shdr *sechdrs, const char *strtab, value); break; + case R_MICROBLAZE_32_PCREL_LO: + pr_debug("R_MICROBLAZE_32_PCREL_LO\n"); + break; + case R_MICROBLAZE_NONE: pr_debug("R_MICROBLAZE_NONE\n"); break; @@ -133,7 +138,7 @@ int apply_relocate_add(Elf32_Shdr *sechdrs, const char *strtab, printk(KERN_ERR "module %s: " "Unknown relocation: %u\n", module->name, - ELF32_R_TYPE(rela->r_info)); + ELF32_R_TYPE(rela[i].r_info)); return -ENOEXEC; } } -- cgit v1.2.3 From 679711b82f010b854c5d4d88472c7a20fdc2b5fe Mon Sep 17 00:00:00 2001 From: Michal Simek Date: Thu, 23 Jul 2009 08:24:47 +0200 Subject: microblaze: Add support for R_MICROBLAZE_64_NONE For example reiserfs use this relocation type. Signed-off-by: Michal Simek --- arch/microblaze/kernel/module.c | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/arch/microblaze/kernel/module.c b/arch/microblaze/kernel/module.c index 93a3871ea54..5a45b1adfef 100644 --- a/arch/microblaze/kernel/module.c +++ b/arch/microblaze/kernel/module.c @@ -130,6 +130,10 @@ int apply_relocate_add(Elf32_Shdr *sechdrs, const char *strtab, pr_debug("R_MICROBLAZE_32_PCREL_LO\n"); break; + case R_MICROBLAZE_64_NONE: + pr_debug("R_MICROBLAZE_NONE\n"); + break; + case R_MICROBLAZE_NONE: pr_debug("R_MICROBLAZE_NONE\n"); break; -- cgit v1.2.3 From 65d3db0601509946fe0c9d2c7b12a5a62ca42e5e Mon Sep 17 00:00:00 2001 From: Michal Simek Date: Fri, 24 Jul 2009 08:11:23 +0200 Subject: microblaze: Typo fix for cpu param inconsistency Signed-off-by: Michal Simek --- arch/microblaze/kernel/cpu/cpuinfo-pvr-full.c | 2 +- arch/microblaze/kernel/cpu/cpuinfo-static.c | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/arch/microblaze/kernel/cpu/cpuinfo-pvr-full.c b/arch/microblaze/kernel/cpu/cpuinfo-pvr-full.c index 153f57c57b6..c259786e7fa 100644 --- a/arch/microblaze/kernel/cpu/cpuinfo-pvr-full.c +++ b/arch/microblaze/kernel/cpu/cpuinfo-pvr-full.c @@ -22,7 +22,7 @@ #define CI(c, p) { ci->c = PVR_##p(pvr); } #define err_printk(x) \ - early_printk("ERROR: Microblaze " x " - different for PVR and DTS\n"); + early_printk("ERROR: Microblaze " x "-different for PVR and DTS\n"); void set_cpuinfo_pvr_full(struct cpuinfo *ci, struct device_node *cpu) { diff --git a/arch/microblaze/kernel/cpu/cpuinfo-static.c b/arch/microblaze/kernel/cpu/cpuinfo-static.c index 450ca6bb828..adb448f93d5 100644 --- a/arch/microblaze/kernel/cpu/cpuinfo-static.c +++ b/arch/microblaze/kernel/cpu/cpuinfo-static.c @@ -18,7 +18,7 @@ static const char family_string[] = CONFIG_XILINX_MICROBLAZE0_FAMILY; static const char cpu_ver_string[] = CONFIG_XILINX_MICROBLAZE0_HW_VER; #define err_printk(x) \ - early_printk("ERROR: Microblaze " x "- different for kernel and DTS\n"); + early_printk("ERROR: Microblaze " x "-different for kernel and DTS\n"); void __init set_cpuinfo_static(struct cpuinfo *ci, struct device_node *cpu) { -- cgit v1.2.3 From 950b260ed21fdb6fa5f18485dabb0b03488431fa Mon Sep 17 00:00:00 2001 From: Sam Ravnborg Date: Fri, 24 Jul 2009 09:04:49 +0200 Subject: microblaze: Makefile cleanup Reviewed the Makefile on request by Michal and this is the resulting changes. o Use ':=' for assignmnet so we do not re-evaluate for each use o Use $(shell echo xxx) to remove "" o Replaced CFLAGS_KERNEL with KBUILD_CFLAGS The settings are equally relevant for modules and the linked kernel o Dropped LDFLAGS_BLOB - it is no longer used o Refactored assignmnets to libs-y and core-y o Use MMU for the MMU specific extension. "MMUEXT" was hurting my eyes and I did not wanted it spread to m68k Signed-off-by: Sam Ravnborg Signed-off-by: Michal Simek --- arch/microblaze/Makefile | 35 ++++++++++++++++++----------------- arch/microblaze/kernel/Makefile | 2 +- 2 files changed, 19 insertions(+), 18 deletions(-) diff --git a/arch/microblaze/Makefile b/arch/microblaze/Makefile index d0bcf80a113..8439598d465 100644 --- a/arch/microblaze/Makefile +++ b/arch/microblaze/Makefile @@ -6,14 +6,16 @@ endif # What CPU vesion are we building for, and crack it open # as major.minor.rev -CPU_VER=$(subst ",,$(CONFIG_XILINX_MICROBLAZE0_HW_VER) ) -CPU_MAJOR=$(shell echo $(CPU_VER) | cut -d '.' -f 1) -CPU_MINOR=$(shell echo $(CPU_VER) | cut -d '.' -f 2) -CPU_REV=$(shell echo $(CPU_VER) | cut -d '.' -f 3) +CPU_VER := $(shell echo $(CONFIG_XILINX_MICROBLAZE0_HW_VER)) +CPU_MAJOR := $(shell echo $(CPU_VER) | cut -d '.' -f 1) +CPU_MINOR := $(shell echo $(CPU_VER) | cut -d '.' -f 2) +CPU_REV := $(shell echo $(CPU_VER) | cut -d '.' -f 3) export CPU_VER CPU_MAJOR CPU_MINOR CPU_REV # Use cpu-related CONFIG_ vars to set compile options. +# The various CONFIG_XILINX cpu features options are integers 0/1/2... +# rather than bools y/n # Work out HW multipler support. This is icky. # 1. Spartan2 has no HW multiplers. @@ -34,30 +36,29 @@ CPUFLAGS-$(CONFIG_XILINX_MICROBLAZE0_USE_PCMP_INSTR) += -mxl-pattern-compare CPUFLAGS-1 += $(call cc-option,-mcpu=v$(CPU_VER)) -# The various CONFIG_XILINX cpu features options are integers 0/1/2... -# rather than bools y/n - # r31 holds current when in kernel mode -CFLAGS_KERNEL += -ffixed-r31 $(CPUFLAGS-1) $(CPUFLAGS-2) +KBUILD_KERNEL += -ffixed-r31 $(CPUFLAGS-1) $(CPUFLAGS-2) LDFLAGS := LDFLAGS_vmlinux := -LDFLAGS_BLOB := --format binary --oformat elf32-microblaze -LIBGCC := $(shell $(CC) $(CFLAGS_KERNEL) -print-libgcc-file-name) +LIBGCC := $(shell $(CC) $(KBUILD_KERNEL) -print-libgcc-file-name) -head-y := arch/microblaze/kernel/head.o -libs-y += arch/microblaze/lib/ $(LIBGCC) -core-y += arch/microblaze/kernel/ arch/microblaze/mm/ \ - arch/microblaze/platform/ +head-y := arch/microblaze/kernel/head.o +libs-y += arch/microblaze/lib/ +libs-y += $(LIBGCC) +core-y += arch/microblaze/kernel/ +core-y += arch/microblaze/mm/ +core-y += arch/microblaze/platform/ -boot := arch/$(ARCH)/boot +boot := arch/microblaze/boot # defines filename extension depending memory management type ifeq ($(CONFIG_MMU),) -MMUEXT := -nommu +MMU := -nommu endif -export MMUEXT + +export MMU all: linux.bin diff --git a/arch/microblaze/kernel/Makefile b/arch/microblaze/kernel/Makefile index f4a5e19a20e..d487729683d 100644 --- a/arch/microblaze/kernel/Makefile +++ b/arch/microblaze/kernel/Makefile @@ -17,4 +17,4 @@ obj-$(CONFIG_HEART_BEAT) += heartbeat.o obj-$(CONFIG_MODULES) += microblaze_ksyms.o module.o obj-$(CONFIG_MMU) += misc.o -obj-y += entry$(MMUEXT).o +obj-y += entry$(MMU).o -- cgit v1.2.3 From 4afcd2dcc6d89da696fc9d469a909adafa9d3636 Mon Sep 17 00:00:00 2001 From: Wan Wei Date: Mon, 27 Jul 2009 14:34:15 +0200 Subject: amd64_edac: read the right F2 maskoffset reg Signed-off-by: Wan Wei Signed-off-by: Borislav Petkov --- drivers/edac/amd64_edac.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/edac/amd64_edac.c b/drivers/edac/amd64_edac.c index 858fe603722..24964c1d0af 100644 --- a/drivers/edac/amd64_edac.c +++ b/drivers/edac/amd64_edac.c @@ -970,7 +970,7 @@ static void amd64_read_dct_base_mask(struct amd64_pvt *pvt) } for (cs = 0; cs < pvt->num_dcsm; cs++) { - reg = K8_DCSB0 + (cs * 4); + reg = K8_DCSM0 + (cs * 4); err = pci_read_config_dword(pvt->dram_f2_ctl, reg, &pvt->dcsm0[cs]); if (unlikely(err)) -- cgit v1.2.3 From 0cbb0a781a42f131e9c6836554f402cb85f8f38b Mon Sep 17 00:00:00 2001 From: Deepak Saxena Date: Mon, 27 Jul 2009 10:49:44 -0700 Subject: net: irda: init spinlock after memcpy irttp_dup() copies a tsap_cb struct, but does not initialize the spinlock in the new structure, which confuses lockdep. Signed-off-by: Deepak Saxena Signed-off-by: Ingo Molnar Signed-off-by: Thomas Gleixner Signed-off-by: David S. Miller --- net/irda/irttp.c | 1 + 1 file changed, 1 insertion(+) diff --git a/net/irda/irttp.c b/net/irda/irttp.c index ecf4eb2717c..9cb79f95bf6 100644 --- a/net/irda/irttp.c +++ b/net/irda/irttp.c @@ -1453,6 +1453,7 @@ struct tsap_cb *irttp_dup(struct tsap_cb *orig, void *instance) } /* Dup */ memcpy(new, orig, sizeof(struct tsap_cb)); + spin_lock_init(&new->lock); /* We don't need the old instance any more */ spin_unlock_irqrestore(&irttp->tsaps->hb_spinlock, flags); -- cgit v1.2.3 From 631c07c8d12bcc6ce4a0fbfbd64ea843d78e2b10 Mon Sep 17 00:00:00 2001 From: Julia Lawall Date: Mon, 27 Jul 2009 13:57:00 -0400 Subject: Btrfs: Correct redundant test in add_inode_ref dir has already been tested. It seems that this test should be on the recently returned value inode. A simplified version of the semantic match that finds this problem is as follows: (http://www.emn.fr/x-info/coccinelle/) Signed-off-by: Julia Lawall Signed-off-by: Chris Mason --- fs/btrfs/tree-log.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/fs/btrfs/tree-log.c b/fs/btrfs/tree-log.c index 19560686261..11d0787c618 100644 --- a/fs/btrfs/tree-log.c +++ b/fs/btrfs/tree-log.c @@ -797,7 +797,7 @@ static noinline int add_inode_ref(struct btrfs_trans_handle *trans, return -ENOENT; inode = read_one_inode(root, key->objectid); - BUG_ON(!dir); + BUG_ON(!inode); ref_ptr = btrfs_item_ptr_offset(eb, slot); ref_end = ref_ptr + btrfs_item_size_nr(eb, slot); -- cgit v1.2.3 From 68b38550ddbea13d296184bf69edff387618b1d3 Mon Sep 17 00:00:00 2001 From: Josef Bacik Date: Mon, 27 Jul 2009 13:57:01 -0400 Subject: Btrfs: change how we unpin extents We are racy with async block caching and unpinning extents. This patch makes things much less complicated by only unpinning the extent if the block group is cached. We check the block_group->cached var under the block_group->lock spin lock. If it is set to BTRFS_CACHE_FINISHED then we update the pinned counters, and unpin the extent and add the free space back. If it is not set to this, we start the caching of the block group so the next time we unpin extents we can unpin the extent. This keeps us from racing with the async caching threads, lets us kill the fs wide async thread counter, and keeps us from having to set DELALLOC bits for every extent we hit if there are caching kthreads going. One thing that needed to be changed was btrfs_free_super_mirror_extents. Now instead of just looking for LOCKED extents, we also look for DIRTY extents, since we could have left some extents pinned in the previous transaction that will never get freed now that we are unmounting, which would cause us to leak memory. So btrfs_free_super_mirror_extents has been changed to btrfs_free_pinned_extents, and it will clear the extents locked for the super mirror, and any remaining pinned extents that may be present. Thank you, Signed-off-by: Josef Bacik Signed-off-by: Chris Mason --- fs/btrfs/ctree.h | 5 +- fs/btrfs/disk-io.c | 3 +- fs/btrfs/extent-tree.c | 149 ++++++++++++++----------------------------------- fs/btrfs/tree-log.c | 2 +- 4 files changed, 46 insertions(+), 113 deletions(-) diff --git a/fs/btrfs/ctree.h b/fs/btrfs/ctree.h index 42b03c4ee49..17ad92c29cf 100644 --- a/fs/btrfs/ctree.h +++ b/fs/btrfs/ctree.h @@ -845,7 +845,6 @@ struct btrfs_fs_info { atomic_t async_submit_draining; atomic_t nr_async_bios; atomic_t async_delalloc_pages; - atomic_t async_caching_threads; /* * this is used by the balancing code to wait for all the pending @@ -1926,7 +1925,7 @@ int btrfs_run_delayed_refs(struct btrfs_trans_handle *trans, struct btrfs_root *root, unsigned long count); int btrfs_lookup_extent(struct btrfs_root *root, u64 start, u64 len); int btrfs_update_pinned_extents(struct btrfs_root *root, - u64 bytenr, u64 num, int pin, int mark_free); + u64 bytenr, u64 num, int pin); int btrfs_drop_leaf_ref(struct btrfs_trans_handle *trans, struct btrfs_root *root, struct extent_buffer *leaf); int btrfs_cross_ref_exist(struct btrfs_trans_handle *trans, @@ -2011,7 +2010,7 @@ void btrfs_delalloc_reserve_space(struct btrfs_root *root, struct inode *inode, u64 bytes); void btrfs_delalloc_free_space(struct btrfs_root *root, struct inode *inode, u64 bytes); -void btrfs_free_super_mirror_extents(struct btrfs_fs_info *info); +void btrfs_free_pinned_extents(struct btrfs_fs_info *info); /* ctree.c */ int btrfs_bin_search(struct extent_buffer *eb, struct btrfs_key *key, int level, int *slot); diff --git a/fs/btrfs/disk-io.c b/fs/btrfs/disk-io.c index ec2c915f7f4..c658397c747 100644 --- a/fs/btrfs/disk-io.c +++ b/fs/btrfs/disk-io.c @@ -1567,7 +1567,6 @@ struct btrfs_root *open_ctree(struct super_block *sb, atomic_set(&fs_info->async_delalloc_pages, 0); atomic_set(&fs_info->async_submit_draining, 0); atomic_set(&fs_info->nr_async_bios, 0); - atomic_set(&fs_info->async_caching_threads, 0); fs_info->sb = sb; fs_info->max_extent = (u64)-1; fs_info->max_inline = 8192 * 1024; @@ -2339,7 +2338,7 @@ int close_ctree(struct btrfs_root *root) free_extent_buffer(root->fs_info->csum_root->commit_root); btrfs_free_block_groups(root->fs_info); - btrfs_free_super_mirror_extents(root->fs_info); + btrfs_free_pinned_extents(root->fs_info); del_fs_roots(fs_info); diff --git a/fs/btrfs/extent-tree.c b/fs/btrfs/extent-tree.c index 508df5f7d2e..08188f1615d 100644 --- a/fs/btrfs/extent-tree.c +++ b/fs/btrfs/extent-tree.c @@ -153,18 +153,26 @@ block_group_cache_tree_search(struct btrfs_fs_info *info, u64 bytenr, return ret; } -void btrfs_free_super_mirror_extents(struct btrfs_fs_info *info) +/* + * We always set EXTENT_LOCKED for the super mirror extents so we don't + * overwrite them, so those bits need to be unset. Also, if we are unmounting + * with pinned extents still sitting there because we had a block group caching, + * we need to clear those now, since we are done. + */ +void btrfs_free_pinned_extents(struct btrfs_fs_info *info) { u64 start, end, last = 0; int ret; while (1) { ret = find_first_extent_bit(&info->pinned_extents, last, - &start, &end, EXTENT_LOCKED); + &start, &end, + EXTENT_LOCKED|EXTENT_DIRTY); if (ret) break; - unlock_extent(&info->pinned_extents, start, end, GFP_NOFS); + clear_extent_bits(&info->pinned_extents, start, end, + EXTENT_LOCKED|EXTENT_DIRTY, GFP_NOFS); last = end+1; } } @@ -209,8 +217,7 @@ static u64 add_new_free_space(struct btrfs_block_group_cache *block_group, while (start < end) { ret = find_first_extent_bit(&info->pinned_extents, start, &extent_start, &extent_end, - EXTENT_DIRTY|EXTENT_LOCKED| - EXTENT_DELALLOC); + EXTENT_DIRTY|EXTENT_LOCKED); if (ret) break; @@ -238,67 +245,6 @@ static u64 add_new_free_space(struct btrfs_block_group_cache *block_group, return total_added; } -DEFINE_MUTEX(discard_mutex); - -/* - * if async kthreads are running when we cross transactions, we mark any pinned - * extents with EXTENT_DELALLOC and then let the caching kthreads clean up those - * extents when they are done. Also we run this from btrfs_finish_extent_commit - * in case there were some pinned extents that were missed because we had - * already cached that block group. - */ -static void btrfs_discard_pinned_extents(struct btrfs_fs_info *fs_info, - struct btrfs_block_group_cache *cache) -{ - u64 start, end, last; - int ret; - - if (!cache) - last = 0; - else - last = cache->key.objectid; - - mutex_lock(&discard_mutex); - while (1) { - ret = find_first_extent_bit(&fs_info->pinned_extents, last, - &start, &end, EXTENT_DELALLOC); - if (ret) - break; - - if (cache && start >= cache->key.objectid + cache->key.offset) - break; - - - if (!cache) { - cache = btrfs_lookup_block_group(fs_info, start); - BUG_ON(!cache); - - start = max(start, cache->key.objectid); - end = min(end, cache->key.objectid + cache->key.offset - 1); - - if (block_group_cache_done(cache)) - btrfs_add_free_space(cache, start, - end - start + 1); - cache = NULL; - } else { - start = max(start, cache->key.objectid); - end = min(end, cache->key.objectid + cache->key.offset - 1); - btrfs_add_free_space(cache, start, end - start + 1); - } - - clear_extent_bits(&fs_info->pinned_extents, start, end, - EXTENT_DELALLOC, GFP_NOFS); - last = end + 1; - - if (need_resched()) { - mutex_unlock(&discard_mutex); - cond_resched(); - mutex_lock(&discard_mutex); - } - } - mutex_unlock(&discard_mutex); -} - static int caching_kthread(void *data) { struct btrfs_block_group_cache *block_group = data; @@ -317,7 +263,6 @@ static int caching_kthread(void *data) if (!path) return -ENOMEM; - atomic_inc(&fs_info->async_caching_threads); atomic_inc(&block_group->space_info->caching_threads); last = max_t(u64, block_group->key.objectid, BTRFS_SUPER_INFO_OFFSET); again: @@ -399,13 +344,9 @@ next: err: btrfs_free_path(path); up_read(&fs_info->extent_root->commit_root_sem); - atomic_dec(&fs_info->async_caching_threads); atomic_dec(&block_group->space_info->caching_threads); wake_up(&block_group->caching_q); - if (!ret) - btrfs_discard_pinned_extents(fs_info, block_group); - return 0; } @@ -1867,7 +1808,7 @@ static int run_one_delayed_ref(struct btrfs_trans_handle *trans, BUG_ON(ret); } btrfs_update_pinned_extents(root, node->bytenr, - node->num_bytes, 1, 0); + node->num_bytes, 1); update_reserved_extents(root, node->bytenr, node->num_bytes, 0); } @@ -3100,19 +3041,15 @@ static u64 first_logical_byte(struct btrfs_root *root, u64 search_start) } int btrfs_update_pinned_extents(struct btrfs_root *root, - u64 bytenr, u64 num, int pin, int mark_free) + u64 bytenr, u64 num, int pin) { u64 len; struct btrfs_block_group_cache *cache; struct btrfs_fs_info *fs_info = root->fs_info; - if (pin) { + if (pin) set_extent_dirty(&fs_info->pinned_extents, bytenr, bytenr + num - 1, GFP_NOFS); - } else { - clear_extent_dirty(&fs_info->pinned_extents, - bytenr, bytenr + num - 1, GFP_NOFS); - } while (num > 0) { cache = btrfs_lookup_block_group(fs_info, bytenr); @@ -3128,14 +3065,34 @@ int btrfs_update_pinned_extents(struct btrfs_root *root, spin_unlock(&cache->space_info->lock); fs_info->total_pinned += len; } else { + int unpin = 0; + + /* + * in order to not race with the block group caching, we + * only want to unpin the extent if we are cached. If + * we aren't cached, we want to start async caching this + * block group so we can free the extent the next time + * around. + */ spin_lock(&cache->space_info->lock); spin_lock(&cache->lock); - cache->pinned -= len; - cache->space_info->bytes_pinned -= len; + unpin = (cache->cached == BTRFS_CACHE_FINISHED); + if (likely(unpin)) { + cache->pinned -= len; + cache->space_info->bytes_pinned -= len; + fs_info->total_pinned -= len; + } spin_unlock(&cache->lock); spin_unlock(&cache->space_info->lock); - fs_info->total_pinned -= len; - if (block_group_cache_done(cache) && mark_free) + + if (likely(unpin)) + clear_extent_dirty(&fs_info->pinned_extents, + bytenr, bytenr + len -1, + GFP_NOFS); + else + cache_block_group(cache); + + if (unpin) btrfs_add_free_space(cache, bytenr, len); } btrfs_put_block_group(cache); @@ -3181,27 +3138,15 @@ int btrfs_copy_pinned(struct btrfs_root *root, struct extent_io_tree *copy) u64 last = 0; u64 start; u64 end; - bool caching_kthreads = false; struct extent_io_tree *pinned_extents = &root->fs_info->pinned_extents; int ret; - if (atomic_read(&root->fs_info->async_caching_threads)) - caching_kthreads = true; - while (1) { ret = find_first_extent_bit(pinned_extents, last, &start, &end, EXTENT_DIRTY); if (ret) break; - /* - * we need to make sure that the pinned extents don't go away - * while we are caching block groups - */ - if (unlikely(caching_kthreads)) - set_extent_delalloc(pinned_extents, start, end, - GFP_NOFS); - set_extent_dirty(copy, start, end, GFP_NOFS); last = end + 1; } @@ -3215,12 +3160,6 @@ int btrfs_finish_extent_commit(struct btrfs_trans_handle *trans, u64 start; u64 end; int ret; - int mark_free = 1; - - ret = find_first_extent_bit(&root->fs_info->pinned_extents, 0, - &start, &end, EXTENT_DELALLOC); - if (!ret) - mark_free = 0; while (1) { ret = find_first_extent_bit(unpin, 0, &start, &end, @@ -3231,16 +3170,12 @@ int btrfs_finish_extent_commit(struct btrfs_trans_handle *trans, ret = btrfs_discard_extent(root, start, end + 1 - start); /* unlocks the pinned mutex */ - btrfs_update_pinned_extents(root, start, end + 1 - start, 0, - mark_free); + btrfs_update_pinned_extents(root, start, end + 1 - start, 0); clear_extent_dirty(unpin, start, end, GFP_NOFS); cond_resched(); } - if (unlikely(!mark_free)) - btrfs_discard_pinned_extents(root->fs_info, NULL); - return ret; } @@ -3281,7 +3216,7 @@ static int pin_down_bytes(struct btrfs_trans_handle *trans, pinit: btrfs_set_path_blocking(path); /* unlocks the pinned mutex */ - btrfs_update_pinned_extents(root, bytenr, num_bytes, 1, 0); + btrfs_update_pinned_extents(root, bytenr, num_bytes, 1); BUG_ON(err < 0); return 0; @@ -3592,7 +3527,7 @@ int btrfs_free_extent(struct btrfs_trans_handle *trans, if (root_objectid == BTRFS_TREE_LOG_OBJECTID) { WARN_ON(owner >= BTRFS_FIRST_FREE_OBJECTID); /* unlocks the pinned mutex */ - btrfs_update_pinned_extents(root, bytenr, num_bytes, 1, 0); + btrfs_update_pinned_extents(root, bytenr, num_bytes, 1); update_reserved_extents(root, bytenr, num_bytes, 0); ret = 0; } else if (owner < BTRFS_FIRST_FREE_OBJECTID) { diff --git a/fs/btrfs/tree-log.c b/fs/btrfs/tree-log.c index 11d0787c618..d91b0de7c50 100644 --- a/fs/btrfs/tree-log.c +++ b/fs/btrfs/tree-log.c @@ -264,7 +264,7 @@ static int process_one_buffer(struct btrfs_root *log, { if (wc->pin) btrfs_update_pinned_extents(log->fs_info->extent_root, - eb->start, eb->len, 1, 0); + eb->start, eb->len, 1); if (btrfs_buffer_uptodate(eb, gen)) { if (wc->write) -- cgit v1.2.3 From 6d7760a88c25057c2c2243e5dfe2d731064bd31d Mon Sep 17 00:00:00 2001 From: Michael Chan Date: Mon, 27 Jul 2009 11:25:58 -0700 Subject: cnic: Fix ISCSI_KEVENT_IF_DOWN message handling. When a net device goes down or when the bnx2i driver is unloaded, the code was not generating the ISCSI_KEVENT_IF_DOWN message properly and this could cause the userspace driver to crash. This is fixed by sending the message properly in the shutdown path. cnic_uio_stop() is also added to send the message when bnx2i is unregistering. Signed-off-by: Michael Chan Signed-off-by: David S. Miller --- drivers/net/cnic.c | 23 +++++++++++++++++++++-- 1 file changed, 21 insertions(+), 2 deletions(-) diff --git a/drivers/net/cnic.c b/drivers/net/cnic.c index 4d1515f45ba..4869d77cbe9 100644 --- a/drivers/net/cnic.c +++ b/drivers/net/cnic.c @@ -227,7 +227,7 @@ static int cnic_send_nlmsg(struct cnic_local *cp, u32 type, } rcu_read_lock(); - ulp_ops = rcu_dereference(cp->ulp_ops[CNIC_ULP_ISCSI]); + ulp_ops = rcu_dereference(cnic_ulp_tbl[CNIC_ULP_ISCSI]); if (ulp_ops) ulp_ops->iscsi_nl_send_msg(cp->dev, msg_type, buf, len); rcu_read_unlock(); @@ -319,6 +319,20 @@ static int cnic_abort_prep(struct cnic_sock *csk) return 0; } +static void cnic_uio_stop(void) +{ + struct cnic_dev *dev; + + read_lock(&cnic_dev_lock); + list_for_each_entry(dev, &cnic_dev_list, list) { + struct cnic_local *cp = dev->cnic_priv; + + if (cp->cnic_uinfo) + cnic_send_nlmsg(cp, ISCSI_KEVENT_IF_DOWN, NULL); + } + read_unlock(&cnic_dev_lock); +} + int cnic_register_driver(int ulp_type, struct cnic_ulp_ops *ulp_ops) { struct cnic_dev *dev; @@ -390,6 +404,9 @@ int cnic_unregister_driver(int ulp_type) } read_unlock(&cnic_dev_lock); + if (ulp_type == CNIC_ULP_ISCSI) + cnic_uio_stop(); + rcu_assign_pointer(cnic_ulp_tbl[ulp_type], NULL); mutex_unlock(&cnic_lock); @@ -632,7 +649,6 @@ static void cnic_free_resc(struct cnic_dev *dev) int i = 0; if (cp->cnic_uinfo) { - cnic_send_nlmsg(cp, ISCSI_KEVENT_IF_DOWN, NULL); while (cp->uio_dev != -1 && i < 15) { msleep(100); i++; @@ -1057,6 +1073,9 @@ static void cnic_ulp_stop(struct cnic_dev *dev) struct cnic_local *cp = dev->cnic_priv; int if_type; + if (cp->cnic_uinfo) + cnic_send_nlmsg(cp, ISCSI_KEVENT_IF_DOWN, NULL); + rcu_read_lock(); for (if_type = 0; if_type < MAX_CNIC_ULP_TYPE; if_type++) { struct cnic_ulp_ops *ulp_ops; -- cgit v1.2.3 From 9e1b32caa525cb236e80e9c671e179bcecccc657 Mon Sep 17 00:00:00 2001 From: Benjamin Herrenschmidt Date: Wed, 22 Jul 2009 15:44:28 +1000 Subject: mm: Pass virtual address to [__]p{te,ud,md}_free_tlb() mm: Pass virtual address to [__]p{te,ud,md}_free_tlb() Upcoming paches to support the new 64-bit "BookE" powerpc architecture will need to have the virtual address corresponding to PTE page when freeing it, due to the way the HW table walker works. Basically, the TLB can be loaded with "large" pages that cover the whole virtual space (well, sort-of, half of it actually) represented by a PTE page, and which contain an "indirect" bit indicating that this TLB entry RPN points to an array of PTEs from which the TLB can then create direct entries. Thus, in order to invalidate those when PTE pages are deleted, we need the virtual address to pass to tlbilx or tlbivax instructions. The old trick of sticking it somewhere in the PTE page struct page sucks too much, the address is almost readily available in all call sites and almost everybody implemets these as macros, so we may as well add the argument everywhere. I added it to the pmd and pud variants for consistency. Signed-off-by: Benjamin Herrenschmidt Acked-by: David Howells [MN10300 & FRV] Acked-by: Nick Piggin Acked-by: Martin Schwidefsky [s390] Signed-off-by: Linus Torvalds --- arch/alpha/include/asm/tlb.h | 4 ++-- arch/arm/include/asm/tlb.h | 4 ++-- arch/avr32/include/asm/pgalloc.h | 2 +- arch/cris/include/asm/pgalloc.h | 2 +- arch/frv/include/asm/pgalloc.h | 4 ++-- arch/frv/include/asm/pgtable.h | 2 +- arch/ia64/include/asm/pgalloc.h | 6 +++--- arch/ia64/include/asm/tlb.h | 12 ++++++------ arch/m32r/include/asm/pgalloc.h | 4 ++-- arch/m68k/include/asm/motorola_pgalloc.h | 6 ++++-- arch/m68k/include/asm/sun3_pgalloc.h | 4 ++-- arch/microblaze/include/asm/pgalloc.h | 4 ++-- arch/mips/include/asm/pgalloc.h | 6 +++--- arch/mn10300/include/asm/pgalloc.h | 2 +- arch/parisc/include/asm/tlb.h | 4 ++-- arch/powerpc/include/asm/pgalloc-32.h | 2 +- arch/powerpc/include/asm/pgalloc-64.h | 4 ++-- arch/powerpc/include/asm/pgalloc.h | 6 +++--- arch/powerpc/mm/hugetlbpage.c | 4 ++-- arch/s390/include/asm/tlb.h | 9 ++++++--- arch/sh/include/asm/pgalloc.h | 4 ++-- arch/sh/include/asm/tlb.h | 6 +++--- arch/sparc/include/asm/pgalloc_32.h | 8 ++++---- arch/sparc/include/asm/tlb_64.h | 6 +++--- arch/um/include/asm/pgalloc.h | 4 ++-- arch/um/include/asm/tlb.h | 6 +++--- arch/x86/include/asm/pgalloc.h | 25 ++++++++++++++++++++++--- arch/x86/mm/pgtable.c | 6 +++--- arch/xtensa/include/asm/tlb.h | 2 +- include/asm-generic/4level-fixup.h | 4 ++-- include/asm-generic/pgtable-nopmd.h | 2 +- include/asm-generic/pgtable-nopud.h | 2 +- include/asm-generic/tlb.h | 12 ++++++------ mm/memory.c | 11 ++++++----- 34 files changed, 107 insertions(+), 82 deletions(-) diff --git a/arch/alpha/include/asm/tlb.h b/arch/alpha/include/asm/tlb.h index c13636575fb..42866759f3f 100644 --- a/arch/alpha/include/asm/tlb.h +++ b/arch/alpha/include/asm/tlb.h @@ -9,7 +9,7 @@ #include -#define __pte_free_tlb(tlb, pte) pte_free((tlb)->mm, pte) -#define __pmd_free_tlb(tlb, pmd) pmd_free((tlb)->mm, pmd) +#define __pte_free_tlb(tlb, pte, address) pte_free((tlb)->mm, pte) +#define __pmd_free_tlb(tlb, pmd, address) pmd_free((tlb)->mm, pmd) #endif diff --git a/arch/arm/include/asm/tlb.h b/arch/arm/include/asm/tlb.h index 321c83e43a1..f41a6f57cd1 100644 --- a/arch/arm/include/asm/tlb.h +++ b/arch/arm/include/asm/tlb.h @@ -102,8 +102,8 @@ tlb_end_vma(struct mmu_gather *tlb, struct vm_area_struct *vma) } #define tlb_remove_page(tlb,page) free_page_and_swap_cache(page) -#define pte_free_tlb(tlb, ptep) pte_free((tlb)->mm, ptep) -#define pmd_free_tlb(tlb, pmdp) pmd_free((tlb)->mm, pmdp) +#define pte_free_tlb(tlb, ptep, addr) pte_free((tlb)->mm, ptep) +#define pmd_free_tlb(tlb, pmdp, addr) pmd_free((tlb)->mm, pmdp) #define tlb_migrate_finish(mm) do { } while (0) diff --git a/arch/avr32/include/asm/pgalloc.h b/arch/avr32/include/asm/pgalloc.h index 64082132394..92ecd8446ef 100644 --- a/arch/avr32/include/asm/pgalloc.h +++ b/arch/avr32/include/asm/pgalloc.h @@ -83,7 +83,7 @@ static inline void pte_free(struct mm_struct *mm, pgtable_t pte) quicklist_free_page(QUICK_PT, NULL, pte); } -#define __pte_free_tlb(tlb,pte) \ +#define __pte_free_tlb(tlb,pte,addr) \ do { \ pgtable_page_dtor(pte); \ tlb_remove_page((tlb), pte); \ diff --git a/arch/cris/include/asm/pgalloc.h b/arch/cris/include/asm/pgalloc.h index a1ba761d057..6da975db112 100644 --- a/arch/cris/include/asm/pgalloc.h +++ b/arch/cris/include/asm/pgalloc.h @@ -47,7 +47,7 @@ static inline void pte_free(struct mm_struct *mm, pgtable_t pte) __free_page(pte); } -#define __pte_free_tlb(tlb,pte) \ +#define __pte_free_tlb(tlb,pte,address) \ do { \ pgtable_page_dtor(pte); \ tlb_remove_page((tlb), pte); \ diff --git a/arch/frv/include/asm/pgalloc.h b/arch/frv/include/asm/pgalloc.h index 971e6addb00..416d19a632f 100644 --- a/arch/frv/include/asm/pgalloc.h +++ b/arch/frv/include/asm/pgalloc.h @@ -49,7 +49,7 @@ static inline void pte_free(struct mm_struct *mm, pgtable_t pte) __free_page(pte); } -#define __pte_free_tlb(tlb,pte) \ +#define __pte_free_tlb(tlb,pte,address) \ do { \ pgtable_page_dtor(pte); \ tlb_remove_page((tlb),(pte)); \ @@ -62,7 +62,7 @@ do { \ */ #define pmd_alloc_one(mm, addr) ({ BUG(); ((pmd_t *) 2); }) #define pmd_free(mm, x) do { } while (0) -#define __pmd_free_tlb(tlb,x) do { } while (0) +#define __pmd_free_tlb(tlb,x,a) do { } while (0) #endif /* CONFIG_MMU */ diff --git a/arch/frv/include/asm/pgtable.h b/arch/frv/include/asm/pgtable.h index 33233011b1c..22c60692b55 100644 --- a/arch/frv/include/asm/pgtable.h +++ b/arch/frv/include/asm/pgtable.h @@ -225,7 +225,7 @@ static inline pud_t *pud_offset(pgd_t *pgd, unsigned long address) */ #define pud_alloc_one(mm, address) NULL #define pud_free(mm, x) do { } while (0) -#define __pud_free_tlb(tlb, x) do { } while (0) +#define __pud_free_tlb(tlb, x, address) do { } while (0) /* * The "pud_xxx()" functions here are trivial for a folded two-level diff --git a/arch/ia64/include/asm/pgalloc.h b/arch/ia64/include/asm/pgalloc.h index b9ac1a6fc21..96a8d927db2 100644 --- a/arch/ia64/include/asm/pgalloc.h +++ b/arch/ia64/include/asm/pgalloc.h @@ -48,7 +48,7 @@ static inline void pud_free(struct mm_struct *mm, pud_t *pud) { quicklist_free(0, NULL, pud); } -#define __pud_free_tlb(tlb, pud) pud_free((tlb)->mm, pud) +#define __pud_free_tlb(tlb, pud, address) pud_free((tlb)->mm, pud) #endif /* CONFIG_PGTABLE_4 */ static inline void @@ -67,7 +67,7 @@ static inline void pmd_free(struct mm_struct *mm, pmd_t *pmd) quicklist_free(0, NULL, pmd); } -#define __pmd_free_tlb(tlb, pmd) pmd_free((tlb)->mm, pmd) +#define __pmd_free_tlb(tlb, pmd, address) pmd_free((tlb)->mm, pmd) static inline void pmd_populate(struct mm_struct *mm, pmd_t * pmd_entry, pgtable_t pte) @@ -117,6 +117,6 @@ static inline void check_pgt_cache(void) quicklist_trim(0, NULL, 25, 16); } -#define __pte_free_tlb(tlb, pte) pte_free((tlb)->mm, pte) +#define __pte_free_tlb(tlb, pte, address) pte_free((tlb)->mm, pte) #endif /* _ASM_IA64_PGALLOC_H */ diff --git a/arch/ia64/include/asm/tlb.h b/arch/ia64/include/asm/tlb.h index 20d8a39680c..85d965cb19a 100644 --- a/arch/ia64/include/asm/tlb.h +++ b/arch/ia64/include/asm/tlb.h @@ -236,22 +236,22 @@ do { \ __tlb_remove_tlb_entry(tlb, ptep, addr); \ } while (0) -#define pte_free_tlb(tlb, ptep) \ +#define pte_free_tlb(tlb, ptep, address) \ do { \ tlb->need_flush = 1; \ - __pte_free_tlb(tlb, ptep); \ + __pte_free_tlb(tlb, ptep, address); \ } while (0) -#define pmd_free_tlb(tlb, ptep) \ +#define pmd_free_tlb(tlb, ptep, address) \ do { \ tlb->need_flush = 1; \ - __pmd_free_tlb(tlb, ptep); \ + __pmd_free_tlb(tlb, ptep, address); \ } while (0) -#define pud_free_tlb(tlb, pudp) \ +#define pud_free_tlb(tlb, pudp, address) \ do { \ tlb->need_flush = 1; \ - __pud_free_tlb(tlb, pudp); \ + __pud_free_tlb(tlb, pudp, address); \ } while (0) #endif /* _ASM_IA64_TLB_H */ diff --git a/arch/m32r/include/asm/pgalloc.h b/arch/m32r/include/asm/pgalloc.h index f11a2b909cd..0fc73619897 100644 --- a/arch/m32r/include/asm/pgalloc.h +++ b/arch/m32r/include/asm/pgalloc.h @@ -58,7 +58,7 @@ static inline void pte_free(struct mm_struct *mm, pgtable_t pte) __free_page(pte); } -#define __pte_free_tlb(tlb, pte) pte_free((tlb)->mm, (pte)) +#define __pte_free_tlb(tlb, pte, addr) pte_free((tlb)->mm, (pte)) /* * allocating and freeing a pmd is trivial: the 1-entry pmd is @@ -68,7 +68,7 @@ static inline void pte_free(struct mm_struct *mm, pgtable_t pte) #define pmd_alloc_one(mm, addr) ({ BUG(); ((pmd_t *)2); }) #define pmd_free(mm, x) do { } while (0) -#define __pmd_free_tlb(tlb, x) do { } while (0) +#define __pmd_free_tlb(tlb, x, addr) do { } while (0) #define pgd_populate(mm, pmd, pte) BUG() #define check_pgt_cache() do { } while (0) diff --git a/arch/m68k/include/asm/motorola_pgalloc.h b/arch/m68k/include/asm/motorola_pgalloc.h index d08bf6261df..15ee4c74a9f 100644 --- a/arch/m68k/include/asm/motorola_pgalloc.h +++ b/arch/m68k/include/asm/motorola_pgalloc.h @@ -54,7 +54,8 @@ static inline void pte_free(struct mm_struct *mm, pgtable_t page) __free_page(page); } -static inline void __pte_free_tlb(struct mmu_gather *tlb, pgtable_t page) +static inline void __pte_free_tlb(struct mmu_gather *tlb, pgtable_t page, + unsigned long address) { pgtable_page_dtor(page); cache_page(kmap(page)); @@ -73,7 +74,8 @@ static inline int pmd_free(struct mm_struct *mm, pmd_t *pmd) return free_pointer_table(pmd); } -static inline int __pmd_free_tlb(struct mmu_gather *tlb, pmd_t *pmd) +static inline int __pmd_free_tlb(struct mmu_gather *tlb, pmd_t *pmd, + unsigned long address) { return free_pointer_table(pmd); } diff --git a/arch/m68k/include/asm/sun3_pgalloc.h b/arch/m68k/include/asm/sun3_pgalloc.h index d4c83f14381..48d80d5a666 100644 --- a/arch/m68k/include/asm/sun3_pgalloc.h +++ b/arch/m68k/include/asm/sun3_pgalloc.h @@ -32,7 +32,7 @@ static inline void pte_free(struct mm_struct *mm, pgtable_t page) __free_page(page); } -#define __pte_free_tlb(tlb,pte) \ +#define __pte_free_tlb(tlb,pte,addr) \ do { \ pgtable_page_dtor(pte); \ tlb_remove_page((tlb), pte); \ @@ -80,7 +80,7 @@ static inline void pmd_populate(struct mm_struct *mm, pmd_t *pmd, pgtable_t page * inside the pgd, so has no extra memory associated with it. */ #define pmd_free(mm, x) do { } while (0) -#define __pmd_free_tlb(tlb, x) do { } while (0) +#define __pmd_free_tlb(tlb, x, addr) do { } while (0) static inline void pgd_free(struct mm_struct *mm, pgd_t *pgd) { diff --git a/arch/microblaze/include/asm/pgalloc.h b/arch/microblaze/include/asm/pgalloc.h index 59a757e46ba..b0131da1387 100644 --- a/arch/microblaze/include/asm/pgalloc.h +++ b/arch/microblaze/include/asm/pgalloc.h @@ -180,7 +180,7 @@ extern inline void pte_free(struct mm_struct *mm, struct page *ptepage) __free_page(ptepage); } -#define __pte_free_tlb(tlb, pte) pte_free((tlb)->mm, (pte)) +#define __pte_free_tlb(tlb, pte, addr) pte_free((tlb)->mm, (pte)) #define pmd_populate(mm, pmd, pte) (pmd_val(*(pmd)) = page_address(pte)) @@ -193,7 +193,7 @@ extern inline void pte_free(struct mm_struct *mm, struct page *ptepage) */ #define pmd_alloc_one(mm, address) ({ BUG(); ((pmd_t *)2); }) /*#define pmd_free(mm, x) do { } while (0)*/ -#define __pmd_free_tlb(tlb, x) do { } while (0) +#define __pmd_free_tlb(tlb, x, addr) do { } while (0) #define pgd_populate(mm, pmd, pte) BUG() extern int do_check_pgt_cache(int, int); diff --git a/arch/mips/include/asm/pgalloc.h b/arch/mips/include/asm/pgalloc.h index 1275831dda2..f705735feef 100644 --- a/arch/mips/include/asm/pgalloc.h +++ b/arch/mips/include/asm/pgalloc.h @@ -98,7 +98,7 @@ static inline void pte_free(struct mm_struct *mm, pgtable_t pte) __free_pages(pte, PTE_ORDER); } -#define __pte_free_tlb(tlb,pte) \ +#define __pte_free_tlb(tlb,pte,address) \ do { \ pgtable_page_dtor(pte); \ tlb_remove_page((tlb), pte); \ @@ -111,7 +111,7 @@ do { \ * inside the pgd, so has no extra memory associated with it. */ #define pmd_free(mm, x) do { } while (0) -#define __pmd_free_tlb(tlb, x) do { } while (0) +#define __pmd_free_tlb(tlb, x, addr) do { } while (0) #endif @@ -132,7 +132,7 @@ static inline void pmd_free(struct mm_struct *mm, pmd_t *pmd) free_pages((unsigned long)pmd, PMD_ORDER); } -#define __pmd_free_tlb(tlb, x) pmd_free((tlb)->mm, x) +#define __pmd_free_tlb(tlb, x, addr) pmd_free((tlb)->mm, x) #endif diff --git a/arch/mn10300/include/asm/pgalloc.h b/arch/mn10300/include/asm/pgalloc.h index ec057e1bd4c..a19f11327cd 100644 --- a/arch/mn10300/include/asm/pgalloc.h +++ b/arch/mn10300/include/asm/pgalloc.h @@ -51,6 +51,6 @@ static inline void pte_free(struct mm_struct *mm, struct page *pte) } -#define __pte_free_tlb(tlb, pte) tlb_remove_page((tlb), (pte)) +#define __pte_free_tlb(tlb, pte, addr) tlb_remove_page((tlb), (pte)) #endif /* _ASM_PGALLOC_H */ diff --git a/arch/parisc/include/asm/tlb.h b/arch/parisc/include/asm/tlb.h index 383b1db310e..07924903989 100644 --- a/arch/parisc/include/asm/tlb.h +++ b/arch/parisc/include/asm/tlb.h @@ -21,7 +21,7 @@ do { if (!(tlb)->fullmm) \ #include -#define __pmd_free_tlb(tlb, pmd) pmd_free((tlb)->mm, pmd) -#define __pte_free_tlb(tlb, pte) pte_free((tlb)->mm, pte) +#define __pmd_free_tlb(tlb, pmd, addr) pmd_free((tlb)->mm, pmd) +#define __pte_free_tlb(tlb, pte, addr) pte_free((tlb)->mm, pte) #endif diff --git a/arch/powerpc/include/asm/pgalloc-32.h b/arch/powerpc/include/asm/pgalloc-32.h index 0815eb40aca..c9500d666a1 100644 --- a/arch/powerpc/include/asm/pgalloc-32.h +++ b/arch/powerpc/include/asm/pgalloc-32.h @@ -16,7 +16,7 @@ extern void pgd_free(struct mm_struct *mm, pgd_t *pgd); */ /* #define pmd_alloc_one(mm,address) ({ BUG(); ((pmd_t *)2); }) */ #define pmd_free(mm, x) do { } while (0) -#define __pmd_free_tlb(tlb,x) do { } while (0) +#define __pmd_free_tlb(tlb,x,a) do { } while (0) /* #define pgd_populate(mm, pmd, pte) BUG() */ #ifndef CONFIG_BOOKE diff --git a/arch/powerpc/include/asm/pgalloc-64.h b/arch/powerpc/include/asm/pgalloc-64.h index afda2bdd860..e6f069c4f71 100644 --- a/arch/powerpc/include/asm/pgalloc-64.h +++ b/arch/powerpc/include/asm/pgalloc-64.h @@ -118,11 +118,11 @@ static inline void pgtable_free(pgtable_free_t pgf) kmem_cache_free(pgtable_cache[cachenum], p); } -#define __pmd_free_tlb(tlb, pmd) \ +#define __pmd_free_tlb(tlb, pmd,addr) \ pgtable_free_tlb(tlb, pgtable_free_cache(pmd, \ PMD_CACHE_NUM, PMD_TABLE_SIZE-1)) #ifndef CONFIG_PPC_64K_PAGES -#define __pud_free_tlb(tlb, pud) \ +#define __pud_free_tlb(tlb, pud, addr) \ pgtable_free_tlb(tlb, pgtable_free_cache(pud, \ PUD_CACHE_NUM, PUD_TABLE_SIZE-1)) #endif /* CONFIG_PPC_64K_PAGES */ diff --git a/arch/powerpc/include/asm/pgalloc.h b/arch/powerpc/include/asm/pgalloc.h index 5d8480265a7..1730e5e298d 100644 --- a/arch/powerpc/include/asm/pgalloc.h +++ b/arch/powerpc/include/asm/pgalloc.h @@ -38,14 +38,14 @@ static inline pgtable_free_t pgtable_free_cache(void *p, int cachenum, extern void pgtable_free_tlb(struct mmu_gather *tlb, pgtable_free_t pgf); #ifdef CONFIG_SMP -#define __pte_free_tlb(tlb,ptepage) \ +#define __pte_free_tlb(tlb,ptepage,address) \ do { \ pgtable_page_dtor(ptepage); \ pgtable_free_tlb(tlb, pgtable_free_cache(page_address(ptepage), \ - PTE_NONCACHE_NUM, PTE_TABLE_SIZE-1)); \ + PTE_NONCACHE_NUM, PTE_TABLE_SIZE-1)); \ } while (0) #else -#define __pte_free_tlb(tlb, pte) pte_free((tlb)->mm, (pte)) +#define __pte_free_tlb(tlb, pte, address) pte_free((tlb)->mm, (pte)) #endif diff --git a/arch/powerpc/mm/hugetlbpage.c b/arch/powerpc/mm/hugetlbpage.c index 9920d6a7cf2..c46ef2ffa3d 100644 --- a/arch/powerpc/mm/hugetlbpage.c +++ b/arch/powerpc/mm/hugetlbpage.c @@ -305,7 +305,7 @@ static void hugetlb_free_pmd_range(struct mmu_gather *tlb, pud_t *pud, pmd = pmd_offset(pud, start); pud_clear(pud); - pmd_free_tlb(tlb, pmd); + pmd_free_tlb(tlb, pmd, start); } static void hugetlb_free_pud_range(struct mmu_gather *tlb, pgd_t *pgd, @@ -348,7 +348,7 @@ static void hugetlb_free_pud_range(struct mmu_gather *tlb, pgd_t *pgd, pud = pud_offset(pgd, start); pgd_clear(pgd); - pud_free_tlb(tlb, pud); + pud_free_tlb(tlb, pud, start); } /* diff --git a/arch/s390/include/asm/tlb.h b/arch/s390/include/asm/tlb.h index 3d8a96d39d9..81150b05368 100644 --- a/arch/s390/include/asm/tlb.h +++ b/arch/s390/include/asm/tlb.h @@ -96,7 +96,8 @@ static inline void tlb_remove_page(struct mmu_gather *tlb, struct page *page) * pte_free_tlb frees a pte table and clears the CRSTE for the * page table from the tlb. */ -static inline void pte_free_tlb(struct mmu_gather *tlb, pgtable_t pte) +static inline void pte_free_tlb(struct mmu_gather *tlb, pgtable_t pte, + unsigned long address) { if (!tlb->fullmm) { tlb->array[tlb->nr_ptes++] = pte; @@ -113,7 +114,8 @@ static inline void pte_free_tlb(struct mmu_gather *tlb, pgtable_t pte) * as the pgd. pmd_free_tlb checks the asce_limit against 2GB * to avoid the double free of the pmd in this case. */ -static inline void pmd_free_tlb(struct mmu_gather *tlb, pmd_t *pmd) +static inline void pmd_free_tlb(struct mmu_gather *tlb, pmd_t *pmd, + unsigned long address) { #ifdef __s390x__ if (tlb->mm->context.asce_limit <= (1UL << 31)) @@ -134,7 +136,8 @@ static inline void pmd_free_tlb(struct mmu_gather *tlb, pmd_t *pmd) * as the pgd. pud_free_tlb checks the asce_limit against 4TB * to avoid the double free of the pud in this case. */ -static inline void pud_free_tlb(struct mmu_gather *tlb, pud_t *pud) +static inline void pud_free_tlb(struct mmu_gather *tlb, pud_t *pud, + unsigned long address) { #ifdef __s390x__ if (tlb->mm->context.asce_limit <= (1UL << 42)) diff --git a/arch/sh/include/asm/pgalloc.h b/arch/sh/include/asm/pgalloc.h index 84dd2db7104..89a482750a5 100644 --- a/arch/sh/include/asm/pgalloc.h +++ b/arch/sh/include/asm/pgalloc.h @@ -73,7 +73,7 @@ static inline void pte_free(struct mm_struct *mm, pgtable_t pte) quicklist_free_page(QUICK_PT, NULL, pte); } -#define __pte_free_tlb(tlb,pte) \ +#define __pte_free_tlb(tlb,pte,addr) \ do { \ pgtable_page_dtor(pte); \ tlb_remove_page((tlb), (pte)); \ @@ -85,7 +85,7 @@ do { \ */ #define pmd_free(mm, x) do { } while (0) -#define __pmd_free_tlb(tlb,x) do { } while (0) +#define __pmd_free_tlb(tlb,x,addr) do { } while (0) static inline void check_pgt_cache(void) { diff --git a/arch/sh/include/asm/tlb.h b/arch/sh/include/asm/tlb.h index 9c16f737074..da8fe7ab872 100644 --- a/arch/sh/include/asm/tlb.h +++ b/arch/sh/include/asm/tlb.h @@ -91,9 +91,9 @@ tlb_end_vma(struct mmu_gather *tlb, struct vm_area_struct *vma) } #define tlb_remove_page(tlb,page) free_page_and_swap_cache(page) -#define pte_free_tlb(tlb, ptep) pte_free((tlb)->mm, ptep) -#define pmd_free_tlb(tlb, pmdp) pmd_free((tlb)->mm, pmdp) -#define pud_free_tlb(tlb, pudp) pud_free((tlb)->mm, pudp) +#define pte_free_tlb(tlb, ptep, addr) pte_free((tlb)->mm, ptep) +#define pmd_free_tlb(tlb, pmdp, addr) pmd_free((tlb)->mm, pmdp) +#define pud_free_tlb(tlb, pudp, addr) pud_free((tlb)->mm, pudp) #define tlb_migrate_finish(mm) do { } while (0) diff --git a/arch/sparc/include/asm/pgalloc_32.h b/arch/sparc/include/asm/pgalloc_32.h index 681582d2696..ca2b34456c4 100644 --- a/arch/sparc/include/asm/pgalloc_32.h +++ b/arch/sparc/include/asm/pgalloc_32.h @@ -44,8 +44,8 @@ BTFIXUPDEF_CALL(pmd_t *, pmd_alloc_one, struct mm_struct *, unsigned long) BTFIXUPDEF_CALL(void, free_pmd_fast, pmd_t *) #define free_pmd_fast(pmd) BTFIXUP_CALL(free_pmd_fast)(pmd) -#define pmd_free(mm, pmd) free_pmd_fast(pmd) -#define __pmd_free_tlb(tlb, pmd) pmd_free((tlb)->mm, pmd) +#define pmd_free(mm, pmd) free_pmd_fast(pmd) +#define __pmd_free_tlb(tlb, pmd, addr) pmd_free((tlb)->mm, pmd) BTFIXUPDEF_CALL(void, pmd_populate, pmd_t *, struct page *) #define pmd_populate(MM, PMD, PTE) BTFIXUP_CALL(pmd_populate)(PMD, PTE) @@ -62,7 +62,7 @@ BTFIXUPDEF_CALL(void, free_pte_fast, pte_t *) #define pte_free_kernel(mm, pte) BTFIXUP_CALL(free_pte_fast)(pte) BTFIXUPDEF_CALL(void, pte_free, pgtable_t ) -#define pte_free(mm, pte) BTFIXUP_CALL(pte_free)(pte) -#define __pte_free_tlb(tlb, pte) pte_free((tlb)->mm, pte) +#define pte_free(mm, pte) BTFIXUP_CALL(pte_free)(pte) +#define __pte_free_tlb(tlb, pte, addr) pte_free((tlb)->mm, pte) #endif /* _SPARC_PGALLOC_H */ diff --git a/arch/sparc/include/asm/tlb_64.h b/arch/sparc/include/asm/tlb_64.h index ee38e731bfa..dca406b9b6f 100644 --- a/arch/sparc/include/asm/tlb_64.h +++ b/arch/sparc/include/asm/tlb_64.h @@ -100,9 +100,9 @@ static inline void tlb_remove_page(struct mmu_gather *mp, struct page *page) } #define tlb_remove_tlb_entry(mp,ptep,addr) do { } while (0) -#define pte_free_tlb(mp, ptepage) pte_free((mp)->mm, ptepage) -#define pmd_free_tlb(mp, pmdp) pmd_free((mp)->mm, pmdp) -#define pud_free_tlb(tlb,pudp) __pud_free_tlb(tlb,pudp) +#define pte_free_tlb(mp, ptepage, addr) pte_free((mp)->mm, ptepage) +#define pmd_free_tlb(mp, pmdp, addr) pmd_free((mp)->mm, pmdp) +#define pud_free_tlb(tlb,pudp, addr) __pud_free_tlb(tlb,pudp,addr) #define tlb_migrate_finish(mm) do { } while (0) #define tlb_start_vma(tlb, vma) do { } while (0) diff --git a/arch/um/include/asm/pgalloc.h b/arch/um/include/asm/pgalloc.h index 718984359f8..32c8ce4e151 100644 --- a/arch/um/include/asm/pgalloc.h +++ b/arch/um/include/asm/pgalloc.h @@ -40,7 +40,7 @@ static inline void pte_free(struct mm_struct *mm, pgtable_t pte) __free_page(pte); } -#define __pte_free_tlb(tlb,pte) \ +#define __pte_free_tlb(tlb,pte, address) \ do { \ pgtable_page_dtor(pte); \ tlb_remove_page((tlb),(pte)); \ @@ -53,7 +53,7 @@ static inline void pmd_free(struct mm_struct *mm, pmd_t *pmd) free_page((unsigned long)pmd); } -#define __pmd_free_tlb(tlb,x) tlb_remove_page((tlb),virt_to_page(x)) +#define __pmd_free_tlb(tlb,x, address) tlb_remove_page((tlb),virt_to_page(x)) #endif #define check_pgt_cache() do { } while (0) diff --git a/arch/um/include/asm/tlb.h b/arch/um/include/asm/tlb.h index 5240fa1c5e0..660caedac9e 100644 --- a/arch/um/include/asm/tlb.h +++ b/arch/um/include/asm/tlb.h @@ -116,11 +116,11 @@ static inline void tlb_remove_page(struct mmu_gather *tlb, struct page *page) __tlb_remove_tlb_entry(tlb, ptep, address); \ } while (0) -#define pte_free_tlb(tlb, ptep) __pte_free_tlb(tlb, ptep) +#define pte_free_tlb(tlb, ptep, addr) __pte_free_tlb(tlb, ptep, addr) -#define pud_free_tlb(tlb, pudp) __pud_free_tlb(tlb, pudp) +#define pud_free_tlb(tlb, pudp, addr) __pud_free_tlb(tlb, pudp, addr) -#define pmd_free_tlb(tlb, pmdp) __pmd_free_tlb(tlb, pmdp) +#define pmd_free_tlb(tlb, pmdp, addr) __pmd_free_tlb(tlb, pmdp, addr) #define tlb_migrate_finish(mm) do {} while (0) diff --git a/arch/x86/include/asm/pgalloc.h b/arch/x86/include/asm/pgalloc.h index dd14c54ac71..0e8c2a0fd92 100644 --- a/arch/x86/include/asm/pgalloc.h +++ b/arch/x86/include/asm/pgalloc.h @@ -46,7 +46,13 @@ static inline void pte_free(struct mm_struct *mm, struct page *pte) __free_page(pte); } -extern void __pte_free_tlb(struct mmu_gather *tlb, struct page *pte); +extern void ___pte_free_tlb(struct mmu_gather *tlb, struct page *pte); + +static inline void __pte_free_tlb(struct mmu_gather *tlb, struct page *pte, + unsigned long address) +{ + ___pte_free_tlb(tlb, pte); +} static inline void pmd_populate_kernel(struct mm_struct *mm, pmd_t *pmd, pte_t *pte) @@ -78,7 +84,13 @@ static inline void pmd_free(struct mm_struct *mm, pmd_t *pmd) free_page((unsigned long)pmd); } -extern void __pmd_free_tlb(struct mmu_gather *tlb, pmd_t *pmd); +extern void ___pmd_free_tlb(struct mmu_gather *tlb, pmd_t *pmd); + +static inline void __pmd_free_tlb(struct mmu_gather *tlb, pmd_t *pmd, + unsigned long adddress) +{ + ___pmd_free_tlb(tlb, pmd); +} #ifdef CONFIG_X86_PAE extern void pud_populate(struct mm_struct *mm, pud_t *pudp, pmd_t *pmd); @@ -108,7 +120,14 @@ static inline void pud_free(struct mm_struct *mm, pud_t *pud) free_page((unsigned long)pud); } -extern void __pud_free_tlb(struct mmu_gather *tlb, pud_t *pud); +extern void ___pud_free_tlb(struct mmu_gather *tlb, pud_t *pud); + +static inline void __pud_free_tlb(struct mmu_gather *tlb, pud_t *pud, + unsigned long address) +{ + ___pud_free_tlb(tlb, pud); +} + #endif /* PAGETABLE_LEVELS > 3 */ #endif /* PAGETABLE_LEVELS > 2 */ diff --git a/arch/x86/mm/pgtable.c b/arch/x86/mm/pgtable.c index 8e43bdd4545..af8f9650058 100644 --- a/arch/x86/mm/pgtable.c +++ b/arch/x86/mm/pgtable.c @@ -25,7 +25,7 @@ pgtable_t pte_alloc_one(struct mm_struct *mm, unsigned long address) return pte; } -void __pte_free_tlb(struct mmu_gather *tlb, struct page *pte) +void ___pte_free_tlb(struct mmu_gather *tlb, struct page *pte) { pgtable_page_dtor(pte); paravirt_release_pte(page_to_pfn(pte)); @@ -33,14 +33,14 @@ void __pte_free_tlb(struct mmu_gather *tlb, struct page *pte) } #if PAGETABLE_LEVELS > 2 -void __pmd_free_tlb(struct mmu_gather *tlb, pmd_t *pmd) +void ___pmd_free_tlb(struct mmu_gather *tlb, pmd_t *pmd) { paravirt_release_pmd(__pa(pmd) >> PAGE_SHIFT); tlb_remove_page(tlb, virt_to_page(pmd)); } #if PAGETABLE_LEVELS > 3 -void __pud_free_tlb(struct mmu_gather *tlb, pud_t *pud) +void ___pud_free_tlb(struct mmu_gather *tlb, pud_t *pud) { paravirt_release_pud(__pa(pud) >> PAGE_SHIFT); tlb_remove_page(tlb, virt_to_page(pud)); diff --git a/arch/xtensa/include/asm/tlb.h b/arch/xtensa/include/asm/tlb.h index 31c220faca0..0d766f9c108 100644 --- a/arch/xtensa/include/asm/tlb.h +++ b/arch/xtensa/include/asm/tlb.h @@ -42,6 +42,6 @@ #include -#define __pte_free_tlb(tlb, pte) pte_free((tlb)->mm, pte) +#define __pte_free_tlb(tlb, pte, address) pte_free((tlb)->mm, pte) #endif /* _XTENSA_TLB_H */ diff --git a/include/asm-generic/4level-fixup.h b/include/asm-generic/4level-fixup.h index 9d40e879f99..77ff547730a 100644 --- a/include/asm-generic/4level-fixup.h +++ b/include/asm-generic/4level-fixup.h @@ -27,9 +27,9 @@ #define pud_page_vaddr(pud) pgd_page_vaddr(pud) #undef pud_free_tlb -#define pud_free_tlb(tlb, x) do { } while (0) +#define pud_free_tlb(tlb, x, addr) do { } while (0) #define pud_free(mm, x) do { } while (0) -#define __pud_free_tlb(tlb, x) do { } while (0) +#define __pud_free_tlb(tlb, x, addr) do { } while (0) #undef pud_addr_end #define pud_addr_end(addr, end) (end) diff --git a/include/asm-generic/pgtable-nopmd.h b/include/asm-generic/pgtable-nopmd.h index a7cdc48e8b7..725612b793c 100644 --- a/include/asm-generic/pgtable-nopmd.h +++ b/include/asm-generic/pgtable-nopmd.h @@ -59,7 +59,7 @@ static inline pmd_t * pmd_offset(pud_t * pud, unsigned long address) static inline void pmd_free(struct mm_struct *mm, pmd_t *pmd) { } -#define __pmd_free_tlb(tlb, x) do { } while (0) +#define __pmd_free_tlb(tlb, x, a) do { } while (0) #undef pmd_addr_end #define pmd_addr_end(addr, end) (end) diff --git a/include/asm-generic/pgtable-nopud.h b/include/asm-generic/pgtable-nopud.h index 87cf449a6df..810431d8351 100644 --- a/include/asm-generic/pgtable-nopud.h +++ b/include/asm-generic/pgtable-nopud.h @@ -52,7 +52,7 @@ static inline pud_t * pud_offset(pgd_t * pgd, unsigned long address) */ #define pud_alloc_one(mm, address) NULL #define pud_free(mm, x) do { } while (0) -#define __pud_free_tlb(tlb, x) do { } while (0) +#define __pud_free_tlb(tlb, x, a) do { } while (0) #undef pud_addr_end #define pud_addr_end(addr, end) (end) diff --git a/include/asm-generic/tlb.h b/include/asm-generic/tlb.h index f490e43a90b..e43f9766259 100644 --- a/include/asm-generic/tlb.h +++ b/include/asm-generic/tlb.h @@ -123,24 +123,24 @@ static inline void tlb_remove_page(struct mmu_gather *tlb, struct page *page) __tlb_remove_tlb_entry(tlb, ptep, address); \ } while (0) -#define pte_free_tlb(tlb, ptep) \ +#define pte_free_tlb(tlb, ptep, address) \ do { \ tlb->need_flush = 1; \ - __pte_free_tlb(tlb, ptep); \ + __pte_free_tlb(tlb, ptep, address); \ } while (0) #ifndef __ARCH_HAS_4LEVEL_HACK -#define pud_free_tlb(tlb, pudp) \ +#define pud_free_tlb(tlb, pudp, address) \ do { \ tlb->need_flush = 1; \ - __pud_free_tlb(tlb, pudp); \ + __pud_free_tlb(tlb, pudp, address); \ } while (0) #endif -#define pmd_free_tlb(tlb, pmdp) \ +#define pmd_free_tlb(tlb, pmdp, address) \ do { \ tlb->need_flush = 1; \ - __pmd_free_tlb(tlb, pmdp); \ + __pmd_free_tlb(tlb, pmdp, address); \ } while (0) #define tlb_migrate_finish(mm) do {} while (0) diff --git a/mm/memory.c b/mm/memory.c index 65216194eb8..aede2ce3aba 100644 --- a/mm/memory.c +++ b/mm/memory.c @@ -135,11 +135,12 @@ void pmd_clear_bad(pmd_t *pmd) * Note: this doesn't free the actual pages themselves. That * has been handled earlier when unmapping all the memory regions. */ -static void free_pte_range(struct mmu_gather *tlb, pmd_t *pmd) +static void free_pte_range(struct mmu_gather *tlb, pmd_t *pmd, + unsigned long addr) { pgtable_t token = pmd_pgtable(*pmd); pmd_clear(pmd); - pte_free_tlb(tlb, token); + pte_free_tlb(tlb, token, addr); tlb->mm->nr_ptes--; } @@ -157,7 +158,7 @@ static inline void free_pmd_range(struct mmu_gather *tlb, pud_t *pud, next = pmd_addr_end(addr, end); if (pmd_none_or_clear_bad(pmd)) continue; - free_pte_range(tlb, pmd); + free_pte_range(tlb, pmd, addr); } while (pmd++, addr = next, addr != end); start &= PUD_MASK; @@ -173,7 +174,7 @@ static inline void free_pmd_range(struct mmu_gather *tlb, pud_t *pud, pmd = pmd_offset(pud, start); pud_clear(pud); - pmd_free_tlb(tlb, pmd); + pmd_free_tlb(tlb, pmd, start); } static inline void free_pud_range(struct mmu_gather *tlb, pgd_t *pgd, @@ -206,7 +207,7 @@ static inline void free_pud_range(struct mmu_gather *tlb, pgd_t *pgd, pud = pud_offset(pgd, start); pgd_clear(pgd); - pud_free_tlb(tlb, pud); + pud_free_tlb(tlb, pud, start); } /* -- cgit v1.2.3 From 6560dc160f3a96b8f1f43e2c6b51aa6eb9898b90 Mon Sep 17 00:00:00 2001 From: Mike Frysinger Date: Thu, 23 Jul 2009 23:42:08 +0930 Subject: module: use MODULE_SYMBOL_PREFIX with module_layout The check_modstruct_version() needs to look up the symbol "module_layout" in the kernel, but it does so literally and not by a C identifier. The trouble is that it does not include a symbol prefix for those ports that need it (like the Blackfin and H8300 port). So make sure we tack on the MODULE_SYMBOL_PREFIX define to the front of it. Signed-off-by: Mike Frysinger Signed-off-by: Rusty Russell Signed-off-by: Linus Torvalds --- kernel/module.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/kernel/module.c b/kernel/module.c index 0a049837008..fd141140355 100644 --- a/kernel/module.c +++ b/kernel/module.c @@ -1068,7 +1068,8 @@ static inline int check_modstruct_version(Elf_Shdr *sechdrs, { const unsigned long *crc; - if (!find_symbol("module_layout", NULL, &crc, true, false)) + if (!find_symbol(MODULE_SYMBOL_PREFIX "module_layout", NULL, + &crc, true, false)) BUG(); return check_version(sechdrs, versindex, "module_layout", mod, crc); } -- cgit v1.2.3 From 9ae260270c90643156cda73427aa1f04c923e627 Mon Sep 17 00:00:00 2001 From: Oleg Nesterov Date: Fri, 19 Jun 2009 02:51:13 +0200 Subject: update the comment in kthread_stop() Commit 63706172f332fd3f6e7458ebfb35fa6de9c21dc5 ("kthreads: rework kthread_stop()") removed the limitation that the thread function mysr not call do_exit() itself, but forgot to update the comment. Since that commit it is OK to use kthread_stop() even if kthread can exit itself. Signed-off-by: Oleg Nesterov Signed-off-by: Rusty Russell Signed-off-by: Linus Torvalds --- kernel/kthread.c | 10 ++++++---- 1 file changed, 6 insertions(+), 4 deletions(-) diff --git a/kernel/kthread.c b/kernel/kthread.c index 9b1a7de2697..eb8751aa041 100644 --- a/kernel/kthread.c +++ b/kernel/kthread.c @@ -180,10 +180,12 @@ EXPORT_SYMBOL(kthread_bind); * @k: thread created by kthread_create(). * * Sets kthread_should_stop() for @k to return true, wakes it, and - * waits for it to exit. Your threadfn() must not call do_exit() - * itself if you use this function! This can also be called after - * kthread_create() instead of calling wake_up_process(): the thread - * will exit without calling threadfn(). + * waits for it to exit. This can also be called after kthread_create() + * instead of calling wake_up_process(): the thread will exit without + * calling threadfn(). + * + * If threadfn() may call do_exit() itself, the caller must ensure + * task_struct can't go away. * * Returns the result of threadfn(), or %-EINTR if wake_up_process() * was never called. -- cgit v1.2.3 From b68f2fb9e73f46037fbeca5fbd4ae8a7ddd8ef6b Mon Sep 17 00:00:00 2001 From: Alan Cox Date: Mon, 27 Jul 2009 10:58:08 +0100 Subject: tty: Fix a USB serial crash/scribble The port lock is used to protect the port state. However the port structure is freed on a hangup, then the lock taken on a close. The right fix is to drop the port on tty->shutdown() but we can't yet do that due to sleep v non-sleeping rules. Instead do the next best thing and fix it up when we are not in -rc season. Reported-by: Daniel Mack Signed-off-by: Alan Cox Tested-by: Daniel Mack Signed-off-by: Linus Torvalds --- drivers/usb/serial/usb-serial.c | 19 ++++++++++++++++++- 1 file changed, 18 insertions(+), 1 deletion(-) diff --git a/drivers/usb/serial/usb-serial.c b/drivers/usb/serial/usb-serial.c index bd7581b3a48..3c8923f62ed 100644 --- a/drivers/usb/serial/usb-serial.c +++ b/drivers/usb/serial/usb-serial.c @@ -340,6 +340,22 @@ static void serial_close(struct tty_struct *tty, struct file *filp) dbg("%s - port %d", __func__, port->number); + /* FIXME: + This leaves a very narrow race. Really we should do the + serial_do_free() on tty->shutdown(), but tty->shutdown can + be called from IRQ context and serial_do_free can sleep. + + The right fix is probably to make the tty free (which is rare) + and thus tty->shutdown() occur via a work queue and simplify all + the drivers that use it. + */ + if (tty_hung_up_p(filp)) { + /* serial_hangup already called serial_down at this point. + Another user may have already reopened the port but + serial_do_free is refcounted */ + serial_do_free(port); + return; + } if (tty_port_close_start(&port->port, tty, filp) == 0) return; @@ -355,7 +371,8 @@ static void serial_hangup(struct tty_struct *tty) struct usb_serial_port *port = tty->driver_data; serial_do_down(port); tty_port_hangup(&port->port); - serial_do_free(port); + /* We must not free port yet - the USB serial layer depends on it's + continued existence */ } static int serial_write(struct tty_struct *tty, const unsigned char *buf, -- cgit v1.2.3 From 3a54297478e6578f96fd54bf4daa1751130aca86 Mon Sep 17 00:00:00 2001 From: Alan Cox Date: Mon, 27 Jul 2009 22:17:51 +0100 Subject: pty: quickfix for the pty ENXIO timing problems This also makes close stall in the normal case which is apparently needed to fix emacs Signed-off-by: Alan Cox Signed-off-by: Linus Torvalds --- drivers/char/pty.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/char/pty.c b/drivers/char/pty.c index 6e6942c45f5..3850a68f265 100644 --- a/drivers/char/pty.c +++ b/drivers/char/pty.c @@ -52,6 +52,7 @@ static void pty_close(struct tty_struct *tty, struct file *filp) return; tty->link->packet = 0; set_bit(TTY_OTHER_CLOSED, &tty->link->flags); + tty_flip_buffer_push(tty->link); wake_up_interruptible(&tty->link->read_wait); wake_up_interruptible(&tty->link->write_wait); if (tty->driver->subtype == PTY_TYPE_MASTER) { @@ -207,6 +208,7 @@ static int pty_open(struct tty_struct *tty, struct file *filp) clear_bit(TTY_OTHER_CLOSED, &tty->link->flags); set_bit(TTY_THROTTLED, &tty->flags); retval = 0; + tty->low_latency = 1; out: return retval; } -- cgit v1.2.3 From 626f5cefc60b281a00db1402b82deff82080c70a Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Tue, 28 Jul 2009 00:54:39 +0200 Subject: ALSA: hda - Add quirk for Dell Studio 1555 Added a quirk entry for Dell Studio 1555. Reference: Novell bnc#525244 https://bugzilla.novell.com/show_bug.cgi?id=525244 Signed-off-by: Takashi Iwai --- sound/pci/hda/patch_sigmatel.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/sound/pci/hda/patch_sigmatel.c b/sound/pci/hda/patch_sigmatel.c index 512f3b9b9a4..5383d8cff88 100644 --- a/sound/pci/hda/patch_sigmatel.c +++ b/sound/pci/hda/patch_sigmatel.c @@ -1809,6 +1809,8 @@ static struct snd_pci_quirk stac92hd73xx_cfg_tbl[] = { "Dell Studio 1537", STAC_DELL_M6_DMIC), SND_PCI_QUIRK(PCI_VENDOR_ID_DELL, 0x02a0, "Dell Studio 17", STAC_DELL_M6_DMIC), + SND_PCI_QUIRK(PCI_VENDOR_ID_DELL, 0x02be, + "Dell Studio 1555", STAC_DELL_M6_DMIC), {} /* terminator */ }; -- cgit v1.2.3 From c56d300086140c93dc3390e5300fd17df802ec0e Mon Sep 17 00:00:00 2001 From: Alan Cox Date: Tue, 28 Jul 2009 00:34:58 +0100 Subject: usb_serial: Fix remaining ref count/lock bugs This fixes - locking bug that was hidden by ecc2e05e739c30870c8e4f252b63a0c4041f2724 - Regression #13821 - Spurious warning when closing and blocking for data write out With these changes my PL2303 always ends up as ttyUSB0 when it should and the module refcounts stay correct. I'll do a more wholesale split & tidy of _open in the next release or two as we get a standard tty_port_open and port->ops->init port->ops->shutdown call backs. Copy sent to Alan Stern and Carlos Mafra just to confirm it fixes all the reports but it passes local testing with the same hardware as Alan Stern. Signed-off-by: Alan Cox Signed-off-by: Linus Torvalds --- drivers/usb/serial/usb-serial.c | 17 +++++++++++++---- 1 file changed, 13 insertions(+), 4 deletions(-) diff --git a/drivers/usb/serial/usb-serial.c b/drivers/usb/serial/usb-serial.c index 3c8923f62ed..99188c92068 100644 --- a/drivers/usb/serial/usb-serial.c +++ b/drivers/usb/serial/usb-serial.c @@ -32,6 +32,7 @@ #include #include #include +#include #include #include #include "pl2303.h" @@ -184,6 +185,7 @@ static int serial_open (struct tty_struct *tty, struct file *filp) struct usb_serial_port *port; unsigned int portNumber; int retval = 0; + int first = 0; dbg("%s", __func__); @@ -223,7 +225,7 @@ static int serial_open (struct tty_struct *tty, struct file *filp) /* If the console is attached, the device is already open */ if (port->port.count == 1 && !port->console) { - + first = 1; /* lock this module before we call it * this may fail, which means we must bail out, * safe because we are called with BKL held */ @@ -246,13 +248,21 @@ static int serial_open (struct tty_struct *tty, struct file *filp) if (retval) goto bailout_interface_put; mutex_unlock(&serial->disc_mutex); + set_bit(ASYNCB_INITIALIZED, &port->port.flags); } mutex_unlock(&port->mutex); /* Now do the correct tty layer semantics */ retval = tty_port_block_til_ready(&port->port, tty, filp); - if (retval == 0) + if (retval == 0) { + if (!first) + usb_serial_put(serial); return 0; - + } + mutex_lock(&port->mutex); + if (first == 0) + goto bailout_mutex_unlock; + /* Undo the initial port actions */ + mutex_lock(&serial->disc_mutex); bailout_interface_put: usb_autopm_put_interface(serial->interface); bailout_module_put: @@ -411,7 +421,6 @@ static int serial_chars_in_buffer(struct tty_struct *tty) struct usb_serial_port *port = tty->driver_data; dbg("%s = port %d", __func__, port->number); - WARN_ON(!port->port.count); /* if the device was unplugged then any remaining characters fell out of the connector ;) */ if (port->serial->disconnected) -- cgit v1.2.3 From 4733fd328f14280900435d9dbae1487d110a4d56 Mon Sep 17 00:00:00 2001 From: Benjamin Herrenschmidt Date: Tue, 28 Jul 2009 10:16:48 +1000 Subject: mm: Remove duplicate definitions in MIPS and SH Those definitions are already provided by asm-generic Signed-off-by: Benjamin Herrenschmidt Acked-by: Paul Mundt Signed-off-by: Linus Torvalds --- arch/mips/include/asm/pgalloc.h | 11 ----------- arch/sh/include/asm/pgalloc.h | 8 -------- 2 files changed, 19 deletions(-) diff --git a/arch/mips/include/asm/pgalloc.h b/arch/mips/include/asm/pgalloc.h index f705735feef..3738f4b48cb 100644 --- a/arch/mips/include/asm/pgalloc.h +++ b/arch/mips/include/asm/pgalloc.h @@ -104,17 +104,6 @@ do { \ tlb_remove_page((tlb), pte); \ } while (0) -#ifdef CONFIG_32BIT - -/* - * allocating and freeing a pmd is trivial: the 1-entry pmd is - * inside the pgd, so has no extra memory associated with it. - */ -#define pmd_free(mm, x) do { } while (0) -#define __pmd_free_tlb(tlb, x, addr) do { } while (0) - -#endif - #ifdef CONFIG_64BIT static inline pmd_t *pmd_alloc_one(struct mm_struct *mm, unsigned long address) diff --git a/arch/sh/include/asm/pgalloc.h b/arch/sh/include/asm/pgalloc.h index 89a482750a5..63ca37bd9a9 100644 --- a/arch/sh/include/asm/pgalloc.h +++ b/arch/sh/include/asm/pgalloc.h @@ -79,14 +79,6 @@ do { \ tlb_remove_page((tlb), (pte)); \ } while (0) -/* - * allocating and freeing a pmd is trivial: the 1-entry pmd is - * inside the pgd, so has no extra memory associated with it. - */ - -#define pmd_free(mm, x) do { } while (0) -#define __pmd_free_tlb(tlb,x,addr) do { } while (0) - static inline void check_pgt_cache(void) { quicklist_trim(QUICK_PGD, NULL, 25, 16); -- cgit v1.2.3 From 48f5690d45b79ffeedc5ab24243b576056f1d2ff Mon Sep 17 00:00:00 2001 From: unsik Kim Date: Tue, 28 Jul 2009 08:52:06 +0200 Subject: mg_disk: remove prohibited sleep operation mflash's polling driver operate in standard request_fn_proc's context, sleep in this isn't permitted. Signed-off-by: unsik Kim Signed-off-by: Jens Axboe --- drivers/block/mg_disk.c | 2 -- 1 file changed, 2 deletions(-) diff --git a/drivers/block/mg_disk.c b/drivers/block/mg_disk.c index f703f547824..5b120eab2ba 100644 --- a/drivers/block/mg_disk.c +++ b/drivers/block/mg_disk.c @@ -245,8 +245,6 @@ static unsigned int mg_wait(struct mg_host *host, u32 expect, u32 msec) mg_dump_status("not ready", status, host); return MG_ERR_INV_STAT; } - if (prv_data->use_polling) - msleep(1); status = inb((unsigned long)host->dev_base + MG_REG_STATUS); } while (time_before(cur_jiffies, expire)); -- cgit v1.2.3 From eb32baec15c38ae6f06cb898a9f791578c5f8c79 Mon Sep 17 00:00:00 2001 From: unsik Kim Date: Tue, 28 Jul 2009 08:52:07 +0200 Subject: mg_disk: fix reading invalid status when use polling driver When using polling driver, little delay is required to access status register. Without this, host might read invalid status. Signed-off-by: unsik Kim Signed-off-by: Jens Axboe --- drivers/block/mg_disk.c | 10 ++++++++++ 1 file changed, 10 insertions(+) diff --git a/drivers/block/mg_disk.c b/drivers/block/mg_disk.c index 5b120eab2ba..6440d594541 100644 --- a/drivers/block/mg_disk.c +++ b/drivers/block/mg_disk.c @@ -219,6 +219,16 @@ static unsigned int mg_wait(struct mg_host *host, u32 expect, u32 msec) host->error = MG_ERR_NONE; expire = jiffies + msecs_to_jiffies(msec); + /* These 2 times dummy status read prevents reading invalid + * status. A very little time (3 times of mflash operating clk) + * is required for busy bit is set. Use dummy read instead of + * busy wait, because mflash's PLL is machine dependent. + */ + if (prv_data->use_polling) { + status = inb((unsigned long)host->dev_base + MG_REG_STATUS); + status = inb((unsigned long)host->dev_base + MG_REG_STATUS); + } + status = inb((unsigned long)host->dev_base + MG_REG_STATUS); do { -- cgit v1.2.3 From 394c6cc63c1d6900ad7498a3221a1d48fc00c4fa Mon Sep 17 00:00:00 2001 From: Bartlomiej Zolnierkiewicz Date: Tue, 28 Jul 2009 08:56:34 +0200 Subject: mg_disk: fix issue with data integrity on error in mg_write() We cannot acknowledge the sector write before checking its status (which is done on the next loop iteration) and we also need to do the final status register check after writing the last sector. Fix mg_write() to match mg_write_intr() in this regard. While at it: - add mg_read_one() and mg_write_one() helpers - always use MG_SECTOR_SIZE and remove MG_STORAGE_BUFFER_SIZE [bart: thanks to Tejun for porting the patch over recent block changes] Cc: unsik Kim Cc: Tejun Heo Signed-off-by: Bartlomiej Zolnierkiewicz =================================================================== Signed-off-by: Jens Axboe --- drivers/block/mg_disk.c | 89 ++++++++++++++++++++++++++----------------------- 1 file changed, 47 insertions(+), 42 deletions(-) diff --git a/drivers/block/mg_disk.c b/drivers/block/mg_disk.c index 6440d594541..19917d5481b 100644 --- a/drivers/block/mg_disk.c +++ b/drivers/block/mg_disk.c @@ -36,7 +36,6 @@ /* Register offsets */ #define MG_BUFF_OFFSET 0x8000 -#define MG_STORAGE_BUFFER_SIZE 0x200 #define MG_REG_OFFSET 0xC000 #define MG_REG_FEATURE (MG_REG_OFFSET + 2) /* write case */ #define MG_REG_ERROR (MG_REG_OFFSET + 2) /* read case */ @@ -477,9 +476,18 @@ static unsigned int mg_out(struct mg_host *host, return MG_ERR_NONE; } +static void mg_read_one(struct mg_host *host, struct request *req) +{ + u16 *buff = (u16 *)req->buffer; + u32 i; + + for (i = 0; i < MG_SECTOR_SIZE >> 1; i++) + *buff++ = inw((unsigned long)host->dev_base + MG_BUFF_OFFSET + + (i << 1)); +} + static void mg_read(struct request *req) { - u32 j; struct mg_host *host = req->rq_disk->private_data; if (mg_out(host, blk_rq_pos(req), blk_rq_sectors(req), @@ -490,26 +498,33 @@ static void mg_read(struct request *req) blk_rq_sectors(req), blk_rq_pos(req), req->buffer); do { - u16 *buff = (u16 *)req->buffer; - if (mg_wait(host, ATA_DRQ, MG_TMAX_WAIT_RD_DRQ) != MG_ERR_NONE) { mg_bad_rw_intr(host); return; } - for (j = 0; j < MG_SECTOR_SIZE >> 1; j++) - *buff++ = inw((unsigned long)host->dev_base + - MG_BUFF_OFFSET + (j << 1)); + + mg_read_one(host, req); outb(MG_CMD_RD_CONF, (unsigned long)host->dev_base + MG_REG_COMMAND); } while (mg_end_request(host, 0, MG_SECTOR_SIZE)); } +static void mg_write_one(struct mg_host *host, struct request *req) +{ + u16 *buff = (u16 *)req->buffer; + u32 i; + + for (i = 0; i < MG_SECTOR_SIZE >> 1; i++) + outw(*buff++, (unsigned long)host->dev_base + MG_BUFF_OFFSET + + (i << 1)); +} + static void mg_write(struct request *req) { - u32 j; struct mg_host *host = req->rq_disk->private_data; + bool rem; if (mg_out(host, blk_rq_pos(req), blk_rq_sectors(req), MG_CMD_WR, NULL) != MG_ERR_NONE) { @@ -520,27 +535,37 @@ static void mg_write(struct request *req) MG_DBG("requested %d sects (from %ld), buffer=0x%p\n", blk_rq_sectors(req), blk_rq_pos(req), req->buffer); - do { - u16 *buff = (u16 *)req->buffer; + if (mg_wait(host, ATA_DRQ, + MG_TMAX_WAIT_WR_DRQ) != MG_ERR_NONE) { + mg_bad_rw_intr(host); + return; + } + + mg_write_one(host, req); + + outb(MG_CMD_WR_CONF, (unsigned long)host->dev_base + MG_REG_COMMAND); - if (mg_wait(host, ATA_DRQ, MG_TMAX_WAIT_WR_DRQ) != MG_ERR_NONE) { + do { + if (blk_rq_sectors(req) > 1 && + mg_wait(host, ATA_DRQ, + MG_TMAX_WAIT_WR_DRQ) != MG_ERR_NONE) { mg_bad_rw_intr(host); return; } - for (j = 0; j < MG_SECTOR_SIZE >> 1; j++) - outw(*buff++, (unsigned long)host->dev_base + - MG_BUFF_OFFSET + (j << 1)); - outb(MG_CMD_WR_CONF, (unsigned long)host->dev_base + - MG_REG_COMMAND); - } while (mg_end_request(host, 0, MG_SECTOR_SIZE)); + rem = mg_end_request(host, 0, MG_SECTOR_SIZE); + if (rem) + mg_write_one(host, req); + + outb(MG_CMD_WR_CONF, + (unsigned long)host->dev_base + MG_REG_COMMAND); + } while (rem); } static void mg_read_intr(struct mg_host *host) { struct request *req = host->req; u32 i; - u16 *buff; /* check status */ do { @@ -558,13 +583,7 @@ static void mg_read_intr(struct mg_host *host) return; ok_to_read: - /* get current segment of request */ - buff = (u16 *)req->buffer; - - /* read 1 sector */ - for (i = 0; i < MG_SECTOR_SIZE >> 1; i++) - *buff++ = inw((unsigned long)host->dev_base + MG_BUFF_OFFSET + - (i << 1)); + mg_read_one(host, req); MG_DBG("sector %ld, remaining=%ld, buffer=0x%p\n", blk_rq_pos(req), blk_rq_sectors(req) - 1, req->buffer); @@ -583,8 +602,7 @@ ok_to_read: static void mg_write_intr(struct mg_host *host) { struct request *req = host->req; - u32 i, j; - u16 *buff; + u32 i; bool rem; /* check status */ @@ -605,12 +623,7 @@ static void mg_write_intr(struct mg_host *host) ok_to_write: if ((rem = mg_end_request(host, 0, MG_SECTOR_SIZE))) { /* write 1 sector and set handler if remains */ - buff = (u16 *)req->buffer; - for (j = 0; j < MG_STORAGE_BUFFER_SIZE >> 1; j++) { - outw(*buff, (unsigned long)host->dev_base + - MG_BUFF_OFFSET + (j << 1)); - buff++; - } + mg_write_one(host, req); MG_DBG("sector %ld, remaining=%ld, buffer=0x%p\n", blk_rq_pos(req), blk_rq_sectors(req), req->buffer); host->mg_do_intr = mg_write_intr; @@ -675,9 +688,6 @@ static unsigned int mg_issue_req(struct request *req, unsigned int sect_num, unsigned int sect_cnt) { - u16 *buff; - u32 i; - switch (rq_data_dir(req)) { case READ: if (mg_out(host, sect_num, sect_cnt, MG_CMD_RD, &mg_read_intr) @@ -701,12 +711,7 @@ static unsigned int mg_issue_req(struct request *req, mg_bad_rw_intr(host); return host->error; } - buff = (u16 *)req->buffer; - for (i = 0; i < MG_SECTOR_SIZE >> 1; i++) { - outw(*buff, (unsigned long)host->dev_base + - MG_BUFF_OFFSET + (i << 1)); - buff++; - } + mg_write_one(host, req); mod_timer(&host->timer, jiffies + 3 * HZ); outb(MG_CMD_WR_CONF, (unsigned long)host->dev_base + MG_REG_COMMAND); -- cgit v1.2.3 From a85a00a699740f6f9863f88aef22060fe1534681 Mon Sep 17 00:00:00 2001 From: unsik Kim Date: Tue, 28 Jul 2009 08:57:33 +0200 Subject: mg_disk: Add missing ready status check on mg_write() When last sector is written, ready bit of status register should be checked. Signed-off-by: unsik Kim Acked-by: Bartlomiej Zolnierkiewicz Signed-off-by: Jens Axboe --- drivers/block/mg_disk.c | 32 +++++++++++++++----------------- 1 file changed, 15 insertions(+), 17 deletions(-) diff --git a/drivers/block/mg_disk.c b/drivers/block/mg_disk.c index 19917d5481b..6d7fbaa9224 100644 --- a/drivers/block/mg_disk.c +++ b/drivers/block/mg_disk.c @@ -524,16 +524,16 @@ static void mg_write_one(struct mg_host *host, struct request *req) static void mg_write(struct request *req) { struct mg_host *host = req->rq_disk->private_data; - bool rem; + unsigned int rem = blk_rq_sectors(req); - if (mg_out(host, blk_rq_pos(req), blk_rq_sectors(req), + if (mg_out(host, blk_rq_pos(req), rem, MG_CMD_WR, NULL) != MG_ERR_NONE) { mg_bad_rw_intr(host); return; } MG_DBG("requested %d sects (from %ld), buffer=0x%p\n", - blk_rq_sectors(req), blk_rq_pos(req), req->buffer); + rem, blk_rq_pos(req), req->buffer); if (mg_wait(host, ATA_DRQ, MG_TMAX_WAIT_WR_DRQ) != MG_ERR_NONE) { @@ -541,25 +541,23 @@ static void mg_write(struct request *req) return; } - mg_write_one(host, req); + do { + mg_write_one(host, req); - outb(MG_CMD_WR_CONF, (unsigned long)host->dev_base + MG_REG_COMMAND); + outb(MG_CMD_WR_CONF, (unsigned long)host->dev_base + + MG_REG_COMMAND); - do { - if (blk_rq_sectors(req) > 1 && - mg_wait(host, ATA_DRQ, - MG_TMAX_WAIT_WR_DRQ) != MG_ERR_NONE) { + rem--; + if (rem > 1 && mg_wait(host, ATA_DRQ, + MG_TMAX_WAIT_WR_DRQ) != MG_ERR_NONE) { + mg_bad_rw_intr(host); + return; + } else if (mg_wait(host, MG_STAT_READY, + MG_TMAX_WAIT_WR_DRQ) != MG_ERR_NONE) { mg_bad_rw_intr(host); return; } - - rem = mg_end_request(host, 0, MG_SECTOR_SIZE); - if (rem) - mg_write_one(host, req); - - outb(MG_CMD_WR_CONF, - (unsigned long)host->dev_base + MG_REG_COMMAND); - } while (rem); + } while (mg_end_request(host, 0, MG_SECTOR_SIZE)); } static void mg_read_intr(struct mg_host *host) -- cgit v1.2.3 From a4e7d46407d73f35d217013b363b79a8f8eafcaa Mon Sep 17 00:00:00 2001 From: Jens Axboe Date: Tue, 28 Jul 2009 09:07:29 +0200 Subject: block: always assign default lock to queues Move the assignment of a default lock below blk_init_queue() to blk_queue_make_request(), so we also get to set the default lock for ->make_request_fn() based drivers. This is important since the queue flag locking requires a lock to be in place. Signed-off-by: Jens Axboe --- block/blk-core.c | 7 ------- block/blk-settings.c | 7 +++++++ 2 files changed, 7 insertions(+), 7 deletions(-) diff --git a/block/blk-core.c b/block/blk-core.c index 4b45435c6ea..a0c340d239b 100644 --- a/block/blk-core.c +++ b/block/blk-core.c @@ -575,13 +575,6 @@ blk_init_queue_node(request_fn_proc *rfn, spinlock_t *lock, int node_id) return NULL; } - /* - * if caller didn't supply a lock, they get per-queue locking with - * our embedded lock - */ - if (!lock) - lock = &q->__queue_lock; - q->request_fn = rfn; q->prep_rq_fn = NULL; q->unplug_fn = generic_unplug_device; diff --git a/block/blk-settings.c b/block/blk-settings.c index bd582a7f531..8a3ea3bba10 100644 --- a/block/blk-settings.c +++ b/block/blk-settings.c @@ -164,6 +164,13 @@ void blk_queue_make_request(struct request_queue *q, make_request_fn *mfn) blk_set_default_limits(&q->limits); + /* + * If the caller didn't supply a lock, fall back to our embedded + * per-queue locks + */ + if (!q->queue_lock) + q->queue_lock = &q->__queue_lock; + /* * by default assume old behaviour and bounce for any highmem page */ -- cgit v1.2.3 From 3839e4b29b4385e4b31075e7805683e2aa2a8103 Mon Sep 17 00:00:00 2001 From: Xiaotian Feng Date: Tue, 28 Jul 2009 09:11:14 +0200 Subject: block: fix improper kobject release in blk_integrity_unregister blk_integrity_unregister should use kobject_put to release the kobject, otherwise after bi is freed, memory of bi->kobj->name is leaked. Signed-off-by: Xiaotian Feng Signed-off-by: Jens Axboe --- block/blk-integrity.c | 1 + 1 file changed, 1 insertion(+) diff --git a/block/blk-integrity.c b/block/blk-integrity.c index 73e28d35568..15c630813b1 100644 --- a/block/blk-integrity.c +++ b/block/blk-integrity.c @@ -379,6 +379,7 @@ void blk_integrity_unregister(struct gendisk *disk) kobject_uevent(&bi->kobj, KOBJ_REMOVE); kobject_del(&bi->kobj); + kobject_put(&bi->kobj); kmem_cache_free(integrity_cachep, bi); disk->integrity = NULL; } -- cgit v1.2.3 From f25784b35f590c81d5fb8245a8cd45e1afb6f1b2 Mon Sep 17 00:00:00 2001 From: Yan Zheng Date: Tue, 28 Jul 2009 08:41:57 -0400 Subject: Btrfs: Fix async caching interaction with unmount - don't stop the caching thread until btrfs_commit_super return. - if caching is interrupted by umount, set last to (u64)-1. otherwise the un-scanned range of block group will be considered as free extent. Signed-off-by: Chris Mason --- fs/btrfs/disk-io.c | 3 +++ fs/btrfs/extent-tree.c | 4 +++- 2 files changed, 6 insertions(+), 1 deletion(-) diff --git a/fs/btrfs/disk-io.c b/fs/btrfs/disk-io.c index c658397c747..3a9b8875988 100644 --- a/fs/btrfs/disk-io.c +++ b/fs/btrfs/disk-io.c @@ -2317,6 +2317,9 @@ int close_ctree(struct btrfs_root *root) printk(KERN_ERR "btrfs: commit super ret %d\n", ret); } + fs_info->closing = 2; + smp_mb(); + if (fs_info->delalloc_bytes) { printk(KERN_INFO "btrfs: at unmount delalloc count %llu\n", (unsigned long long)fs_info->delalloc_bytes); diff --git a/fs/btrfs/extent-tree.c b/fs/btrfs/extent-tree.c index 08188f1615d..fadf69a2764 100644 --- a/fs/btrfs/extent-tree.c +++ b/fs/btrfs/extent-tree.c @@ -288,8 +288,10 @@ again: while (1) { smp_mb(); - if (block_group->fs_info->closing) + if (block_group->fs_info->closing > 1) { + last = (u64)-1; break; + } leaf = path->nodes[0]; slot = path->slots[0]; -- cgit v1.2.3 From a5b92cc348299c20be215b9f4b50853ecfbf3864 Mon Sep 17 00:00:00 2001 From: Syed Rafiuddin Date: Tue, 28 Jul 2009 18:57:10 +0530 Subject: ARM: OMAP4: Add McBSP support This patch creates McBSP support on OMAP4430 development platform. This patch includes corresponding base address changes for OMAP4. Signed-off-by: Syed Rafiuddin --- arch/arm/mach-omap2/mcbsp.c | 41 +++++++++++++++++++++++++++++++++ arch/arm/plat-omap/include/mach/mcbsp.h | 8 ++++++- arch/arm/plat-omap/mcbsp.c | 2 +- 3 files changed, 49 insertions(+), 2 deletions(-) diff --git a/arch/arm/mach-omap2/mcbsp.c b/arch/arm/mach-omap2/mcbsp.c index a5c0f0435cd..d49dfb5e931 100644 --- a/arch/arm/mach-omap2/mcbsp.c +++ b/arch/arm/mach-omap2/mcbsp.c @@ -169,6 +169,42 @@ static struct omap_mcbsp_platform_data omap34xx_mcbsp_pdata[] = { #define OMAP34XX_MCBSP_PDATA_SZ 0 #endif +static struct omap_mcbsp_platform_data omap44xx_mcbsp_pdata[] = { + { + .phys_base = OMAP44XX_MCBSP1_BASE, + .dma_rx_sync = OMAP44XX_DMA_MCBSP1_RX, + .dma_tx_sync = OMAP44XX_DMA_MCBSP1_TX, + .rx_irq = INT_24XX_MCBSP1_IRQ_RX, + .tx_irq = INT_24XX_MCBSP1_IRQ_TX, + .ops = &omap2_mcbsp_ops, + }, + { + .phys_base = OMAP44XX_MCBSP2_BASE, + .dma_rx_sync = OMAP44XX_DMA_MCBSP2_RX, + .dma_tx_sync = OMAP44XX_DMA_MCBSP2_TX, + .rx_irq = INT_24XX_MCBSP2_IRQ_RX, + .tx_irq = INT_24XX_MCBSP2_IRQ_TX, + .ops = &omap2_mcbsp_ops, + }, + { + .phys_base = OMAP44XX_MCBSP3_BASE, + .dma_rx_sync = OMAP44XX_DMA_MCBSP3_RX, + .dma_tx_sync = OMAP44XX_DMA_MCBSP3_TX, + .rx_irq = INT_24XX_MCBSP3_IRQ_RX, + .tx_irq = INT_24XX_MCBSP3_IRQ_TX, + .ops = &omap2_mcbsp_ops, + }, + { + .phys_base = OMAP44XX_MCBSP4_BASE, + .dma_rx_sync = OMAP44XX_DMA_MCBSP4_RX, + .dma_tx_sync = OMAP44XX_DMA_MCBSP4_TX, + .rx_irq = INT_24XX_MCBSP4_IRQ_RX, + .tx_irq = INT_24XX_MCBSP4_IRQ_TX, + .ops = &omap2_mcbsp_ops, + }, +}; +#define OMAP44XX_MCBSP_PDATA_SZ ARRAY_SIZE(omap44xx_mcbsp_pdata) + static int __init omap2_mcbsp_init(void) { if (cpu_is_omap2420()) @@ -177,6 +213,8 @@ static int __init omap2_mcbsp_init(void) omap_mcbsp_count = OMAP2430_MCBSP_PDATA_SZ; if (cpu_is_omap34xx()) omap_mcbsp_count = OMAP34XX_MCBSP_PDATA_SZ; + if (cpu_is_omap44xx()) + omap_mcbsp_count = OMAP44XX_MCBSP_PDATA_SZ; mcbsp_ptr = kzalloc(omap_mcbsp_count * sizeof(struct omap_mcbsp *), GFP_KERNEL); @@ -192,6 +230,9 @@ static int __init omap2_mcbsp_init(void) if (cpu_is_omap34xx()) omap_mcbsp_register_board_cfg(omap34xx_mcbsp_pdata, OMAP34XX_MCBSP_PDATA_SZ); + if (cpu_is_omap44xx()) + omap_mcbsp_register_board_cfg(omap44xx_mcbsp_pdata, + OMAP44XX_MCBSP_PDATA_SZ); return omap_mcbsp_init(); } diff --git a/arch/arm/plat-omap/include/mach/mcbsp.h b/arch/arm/plat-omap/include/mach/mcbsp.h index bb154ea7676..ec6f81e06d3 100644 --- a/arch/arm/plat-omap/include/mach/mcbsp.h +++ b/arch/arm/plat-omap/include/mach/mcbsp.h @@ -53,6 +53,11 @@ #define OMAP34XX_MCBSP4_BASE 0x49026000 #define OMAP34XX_MCBSP5_BASE 0x48096000 +#define OMAP44XX_MCBSP1_BASE 0x49022000 +#define OMAP44XX_MCBSP2_BASE 0x49024000 +#define OMAP44XX_MCBSP3_BASE 0x49026000 +#define OMAP44XX_MCBSP4_BASE 0x48074000 + #if defined(CONFIG_ARCH_OMAP15XX) || defined(CONFIG_ARCH_OMAP16XX) || defined(CONFIG_ARCH_OMAP730) #define OMAP_MCBSP_REG_DRR2 0x00 @@ -98,7 +103,8 @@ #define AUDIO_DMA_TX OMAP_DMA_MCBSP1_TX #define AUDIO_DMA_RX OMAP_DMA_MCBSP1_RX -#elif defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX) +#elif defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX) || \ + defined(CONFIG_ARCH_OMAP4) #define OMAP_MCBSP_REG_DRR2 0x00 #define OMAP_MCBSP_REG_DRR1 0x04 diff --git a/arch/arm/plat-omap/mcbsp.c b/arch/arm/plat-omap/mcbsp.c index efa0e0111f3..e42fa7cfc79 100644 --- a/arch/arm/plat-omap/mcbsp.c +++ b/arch/arm/plat-omap/mcbsp.c @@ -191,7 +191,7 @@ void omap_mcbsp_config(unsigned int id, const struct omap_mcbsp_reg_cfg *config) OMAP_MCBSP_WRITE(io_base, MCR2, config->mcr2); OMAP_MCBSP_WRITE(io_base, MCR1, config->mcr1); OMAP_MCBSP_WRITE(io_base, PCR0, config->pcr0); - if (cpu_is_omap2430() || cpu_is_omap34xx()) { + if (cpu_is_omap2430() || cpu_is_omap34xx() || cpu_is_omap44xx()) { OMAP_MCBSP_WRITE(io_base, XCCR, config->xccr); OMAP_MCBSP_WRITE(io_base, RCCR, config->rccr); } -- cgit v1.2.3 From 085b54d99b8ee999e7905b8f16e201e0da8ba369 Mon Sep 17 00:00:00 2001 From: Syed Rafiuddin Date: Tue, 28 Jul 2009 18:57:22 +0530 Subject: ARM: OMAP4: Add UART4 support This patch adds UART4 support on OMAP4430 development platform. Signed-off-by: Syed Rafiuddin --- arch/arm/mach-omap2/board-4430sdp.c | 2 +- arch/arm/mach-omap2/serial.c | 10 ++++++++++ 2 files changed, 11 insertions(+), 1 deletion(-) diff --git a/arch/arm/mach-omap2/board-4430sdp.c b/arch/arm/mach-omap2/board-4430sdp.c index 57e477bd89c..7e1e721f032 100644 --- a/arch/arm/mach-omap2/board-4430sdp.c +++ b/arch/arm/mach-omap2/board-4430sdp.c @@ -39,7 +39,7 @@ static struct platform_device *sdp4430_devices[] __initdata = { }; static struct omap_uart_config sdp4430_uart_config __initdata = { - .enabled_uarts = (1 << 0) | (1 << 1) | (1 << 2), + .enabled_uarts = (1 << 0) | (1 << 1) | (1 << 2) | (1 << 3), }; static struct omap_lcd_config sdp4430_lcd_config __initdata = { diff --git a/arch/arm/mach-omap2/serial.c b/arch/arm/mach-omap2/serial.c index b094c15bfe4..c0bea75f13f 100644 --- a/arch/arm/mach-omap2/serial.c +++ b/arch/arm/mach-omap2/serial.c @@ -97,6 +97,16 @@ static struct plat_serial8250_port serial_platform_data[] = { .regshift = 2, .uartclk = OMAP24XX_BASE_BAUD * 16, }, { +#ifdef CONFIG_ARCH_OMAP4 + .membase = IO_ADDRESS(OMAP_UART4_BASE), + .mapbase = OMAP_UART4_BASE, + .irq = 70, + .flags = UPF_BOOT_AUTOCONF, + .iotype = UPIO_MEM, + .regshift = 2, + .uartclk = OMAP24XX_BASE_BAUD * 16, + }, { +#endif .flags = 0 } }; -- cgit v1.2.3 From 78a1a6d3411de1a8b0dc1cb92754b5f12f251912 Mon Sep 17 00:00:00 2001 From: Syed Rafiuddin Date: Tue, 28 Jul 2009 18:57:30 +0530 Subject: ARM: OMAP4: Update the GPIO support This patch adds GPIO support on OMAP4430 development platform. Signed-off-by: Syed Rafiuddin --- arch/arm/plat-omap/gpio.c | 249 ++++++++++++++++++++++++++++++++++++---------- 1 file changed, 198 insertions(+), 51 deletions(-) diff --git a/arch/arm/plat-omap/gpio.c b/arch/arm/plat-omap/gpio.c index 26b387c1242..f0b71680ec5 100644 --- a/arch/arm/plat-omap/gpio.c +++ b/arch/arm/plat-omap/gpio.c @@ -138,6 +138,32 @@ #define OMAP24XX_GPIO_CLEARDATAOUT 0x0090 #define OMAP24XX_GPIO_SETDATAOUT 0x0094 +#define OMAP4_GPIO_REVISION 0x0000 +#define OMAP4_GPIO_SYSCONFIG 0x0010 +#define OMAP4_GPIO_EOI 0x0020 +#define OMAP4_GPIO_IRQSTATUSRAW0 0x0024 +#define OMAP4_GPIO_IRQSTATUSRAW1 0x0028 +#define OMAP4_GPIO_IRQSTATUS0 0x002c +#define OMAP4_GPIO_IRQSTATUS1 0x0030 +#define OMAP4_GPIO_IRQSTATUSSET0 0x0034 +#define OMAP4_GPIO_IRQSTATUSSET1 0x0038 +#define OMAP4_GPIO_IRQSTATUSCLR0 0x003c +#define OMAP4_GPIO_IRQSTATUSCLR1 0x0040 +#define OMAP4_GPIO_IRQWAKEN0 0x0044 +#define OMAP4_GPIO_IRQWAKEN1 0x0048 +#define OMAP4_GPIO_SYSSTATUS 0x0104 +#define OMAP4_GPIO_CTRL 0x0130 +#define OMAP4_GPIO_OE 0x0134 +#define OMAP4_GPIO_DATAIN 0x0138 +#define OMAP4_GPIO_DATAOUT 0x013c +#define OMAP4_GPIO_LEVELDETECT0 0x0140 +#define OMAP4_GPIO_LEVELDETECT1 0x0144 +#define OMAP4_GPIO_RISINGDETECT 0x0148 +#define OMAP4_GPIO_FALLINGDETECT 0x014c +#define OMAP4_GPIO_DEBOUNCENABLE 0x0150 +#define OMAP4_GPIO_DEBOUNCINGTIME 0x0154 +#define OMAP4_GPIO_CLEARDATAOUT 0x0190 +#define OMAP4_GPIO_SETDATAOUT 0x0194 /* * omap34xx specific GPIO registers */ @@ -386,11 +412,15 @@ static void _set_gpio_direction(struct gpio_bank *bank, int gpio, int is_input) reg += OMAP850_GPIO_DIR_CONTROL; break; #endif -#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX) || \ - defined(CONFIG_ARCH_OMAP4) +#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX) case METHOD_GPIO_24XX: reg += OMAP24XX_GPIO_OE; break; +#endif +#if defined(CONFIG_ARCH_OMAP4) + case METHOD_GPIO_24XX: + reg += OMAP4_GPIO_OE; + break; #endif default: WARN_ON(1); @@ -459,8 +489,7 @@ static void _set_gpio_dataout(struct gpio_bank *bank, int gpio, int enable) l &= ~(1 << gpio); break; #endif -#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX) || \ - defined(CONFIG_ARCH_OMAP4) +#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX) case METHOD_GPIO_24XX: if (enable) reg += OMAP24XX_GPIO_SETDATAOUT; @@ -468,6 +497,15 @@ static void _set_gpio_dataout(struct gpio_bank *bank, int gpio, int enable) reg += OMAP24XX_GPIO_CLEARDATAOUT; l = 1 << gpio; break; +#endif +#ifdef CONFIG_ARCH_OMAP4 + case METHOD_GPIO_24XX: + if (enable) + reg += OMAP4_GPIO_SETDATAOUT; + else + reg += OMAP4_GPIO_CLEARDATAOUT; + l = 1 << gpio; + break; #endif default: WARN_ON(1); @@ -511,11 +549,15 @@ static int __omap_get_gpio_datain(int gpio) reg += OMAP850_GPIO_DATA_INPUT; break; #endif -#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX) || \ - defined(CONFIG_ARCH_OMAP4) +#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX) case METHOD_GPIO_24XX: reg += OMAP24XX_GPIO_DATAIN; break; +#endif +#ifdef CONFIG_ARCH_OMAP4 + case METHOD_GPIO_24XX: + reg += OMAP4_GPIO_DATAIN; + break; #endif default: return -EINVAL; @@ -544,7 +586,11 @@ void omap_set_gpio_debounce(int gpio, int enable) bank = get_gpio_bank(gpio); reg = bank->base; +#ifdef CONFIG_ARCH_OMAP4 + reg += OMAP4_GPIO_DEBOUNCENABLE; +#else reg += OMAP24XX_GPIO_DEBOUNCE_EN; +#endif spin_lock_irqsave(&bank->lock, flags); val = __raw_readl(reg); @@ -581,7 +627,11 @@ void omap_set_gpio_debounce_time(int gpio, int enc_time) reg = bank->base; enc_time &= 0xff; +#ifdef CONFIG_ARCH_OMAP4 + reg += OMAP4_GPIO_DEBOUNCINGTIME; +#else reg += OMAP24XX_GPIO_DEBOUNCE_VAL; +#endif __raw_writel(enc_time, reg); } EXPORT_SYMBOL(omap_set_gpio_debounce_time); @@ -593,23 +643,46 @@ static inline void set_24xx_gpio_triggering(struct gpio_bank *bank, int gpio, { void __iomem *base = bank->base; u32 gpio_bit = 1 << gpio; + u32 val; - MOD_REG_BIT(OMAP24XX_GPIO_LEVELDETECT0, gpio_bit, - trigger & IRQ_TYPE_LEVEL_LOW); - MOD_REG_BIT(OMAP24XX_GPIO_LEVELDETECT1, gpio_bit, - trigger & IRQ_TYPE_LEVEL_HIGH); - MOD_REG_BIT(OMAP24XX_GPIO_RISINGDETECT, gpio_bit, - trigger & IRQ_TYPE_EDGE_RISING); - MOD_REG_BIT(OMAP24XX_GPIO_FALLINGDETECT, gpio_bit, - trigger & IRQ_TYPE_EDGE_FALLING); - + if (cpu_is_omap44xx()) { + MOD_REG_BIT(OMAP4_GPIO_LEVELDETECT0, gpio_bit, + trigger & IRQ_TYPE_LEVEL_LOW); + MOD_REG_BIT(OMAP4_GPIO_LEVELDETECT1, gpio_bit, + trigger & IRQ_TYPE_LEVEL_HIGH); + MOD_REG_BIT(OMAP4_GPIO_RISINGDETECT, gpio_bit, + trigger & IRQ_TYPE_EDGE_RISING); + MOD_REG_BIT(OMAP4_GPIO_FALLINGDETECT, gpio_bit, + trigger & IRQ_TYPE_EDGE_FALLING); + } else { + MOD_REG_BIT(OMAP24XX_GPIO_LEVELDETECT0, gpio_bit, + trigger & IRQ_TYPE_LEVEL_LOW); + MOD_REG_BIT(OMAP24XX_GPIO_LEVELDETECT1, gpio_bit, + trigger & IRQ_TYPE_LEVEL_HIGH); + MOD_REG_BIT(OMAP24XX_GPIO_RISINGDETECT, gpio_bit, + trigger & IRQ_TYPE_EDGE_RISING); + MOD_REG_BIT(OMAP24XX_GPIO_FALLINGDETECT, gpio_bit, + trigger & IRQ_TYPE_EDGE_FALLING); + } if (likely(!(bank->non_wakeup_gpios & gpio_bit))) { - if (trigger != 0) - __raw_writel(1 << gpio, bank->base + if (cpu_is_omap44xx()) { + if (trigger != 0) + __raw_writel(1 << gpio, bank->base+ + OMAP4_GPIO_IRQWAKEN0); + else { + val = __raw_readl(bank->base + + OMAP4_GPIO_IRQWAKEN0); + __raw_writel(val & (~(1 << gpio)), bank->base + + OMAP4_GPIO_IRQWAKEN0); + } + } else { + if (trigger != 0) + __raw_writel(1 << gpio, bank->base + OMAP24XX_GPIO_SETWKUENA); - else - __raw_writel(1 << gpio, bank->base + else + __raw_writel(1 << gpio, bank->base + OMAP24XX_GPIO_CLEARWKUENA); + } } else { if (trigger != 0) bank->enabled_non_wakeup_gpios |= gpio_bit; @@ -617,9 +690,15 @@ static inline void set_24xx_gpio_triggering(struct gpio_bank *bank, int gpio, bank->enabled_non_wakeup_gpios &= ~gpio_bit; } - bank->level_mask = - __raw_readl(bank->base + OMAP24XX_GPIO_LEVELDETECT0) | - __raw_readl(bank->base + OMAP24XX_GPIO_LEVELDETECT1); + if (cpu_is_omap44xx()) { + bank->level_mask = + __raw_readl(bank->base + OMAP4_GPIO_LEVELDETECT0) | + __raw_readl(bank->base + OMAP4_GPIO_LEVELDETECT1); + } else { + bank->level_mask = + __raw_readl(bank->base + OMAP24XX_GPIO_LEVELDETECT0) | + __raw_readl(bank->base + OMAP24XX_GPIO_LEVELDETECT1); + } } #endif @@ -783,11 +862,15 @@ static void _clear_gpio_irqbank(struct gpio_bank *bank, int gpio_mask) reg += OMAP850_GPIO_INT_STATUS; break; #endif -#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX) || \ - defined(CONFIG_ARCH_OMAP4) +#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX) case METHOD_GPIO_24XX: reg += OMAP24XX_GPIO_IRQSTATUS1; break; +#endif +#if defined(CONFIG_ARCH_OMAP4) + case METHOD_GPIO_24XX: + reg += OMAP4_GPIO_IRQSTATUS0; + break; #endif default: WARN_ON(1); @@ -798,12 +881,16 @@ static void _clear_gpio_irqbank(struct gpio_bank *bank, int gpio_mask) /* Workaround for clearing DSP GPIO interrupts to allow retention */ #if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX) reg = bank->base + OMAP24XX_GPIO_IRQSTATUS2; - if (cpu_is_omap24xx() || cpu_is_omap34xx()) +#endif +#if defined(CONFIG_ARCH_OMAP4) + reg = bank->base + OMAP4_GPIO_IRQSTATUS1; +#endif + if (cpu_is_omap24xx() || cpu_is_omap34xx() || cpu_is_omap44xx()) { __raw_writel(gpio_mask, reg); /* Flush posted write for the irq status to avoid spurious interrupts */ __raw_readl(reg); -#endif + } } static inline void _clear_gpio_irqstatus(struct gpio_bank *bank, int gpio) @@ -853,12 +940,17 @@ static u32 _get_gpio_irqbank_mask(struct gpio_bank *bank) inv = 1; break; #endif -#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX) || \ - defined(CONFIG_ARCH_OMAP4) +#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX) case METHOD_GPIO_24XX: reg += OMAP24XX_GPIO_IRQENABLE1; mask = 0xffffffff; break; +#endif +#if defined(CONFIG_ARCH_OMAP4) + case METHOD_GPIO_24XX: + reg += OMAP4_GPIO_IRQSTATUSSET0; + mask = 0xffffffff; + break; #endif default: WARN_ON(1); @@ -927,8 +1019,7 @@ static void _enable_gpio_irqbank(struct gpio_bank *bank, int gpio_mask, int enab l |= gpio_mask; break; #endif -#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX) || \ - defined(CONFIG_ARCH_OMAP4) +#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX) case METHOD_GPIO_24XX: if (enable) reg += OMAP24XX_GPIO_SETIRQENABLE1; @@ -936,6 +1027,15 @@ static void _enable_gpio_irqbank(struct gpio_bank *bank, int gpio_mask, int enab reg += OMAP24XX_GPIO_CLEARIRQENABLE1; l = gpio_mask; break; +#endif +#ifdef CONFIG_ARCH_OMAP4 + case METHOD_GPIO_24XX: + if (enable) + reg += OMAP4_GPIO_IRQSTATUSSET0; + else + reg += OMAP4_GPIO_IRQSTATUSCLR0; + l = gpio_mask; + break; #endif default: WARN_ON(1); @@ -1112,10 +1212,13 @@ static void gpio_irq_handler(unsigned int irq, struct irq_desc *desc) if (bank->method == METHOD_GPIO_850) isr_reg = bank->base + OMAP850_GPIO_INT_STATUS; #endif -#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX) || \ - defined(CONFIG_ARCH_OMAP4) +#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX) if (bank->method == METHOD_GPIO_24XX) isr_reg = bank->base + OMAP24XX_GPIO_IRQSTATUS1; +#endif +#if defined(CONFIG_ARCH_OMAP4) + if (bank->method == METHOD_GPIO_24XX) + isr_reg = bank->base + OMAP4_GPIO_IRQSTATUS0; #endif while(1) { u32 isr_saved, level_mask = 0; @@ -1547,7 +1650,7 @@ static int __init _omap_gpio_init(void) gpio_bank_count = OMAP34XX_NR_GPIOS; gpio_bank = gpio_bank_44xx; - rev = __raw_readl(gpio_bank[0].base + OMAP24XX_GPIO_REVISION); + rev = __raw_readl(gpio_bank[0].base + OMAP4_GPIO_REVISION); printk(KERN_INFO "OMAP44xx GPIO hardware version %d.%d\n", (rev >> 4) & 0x0f, rev & 0x0f); } @@ -1581,7 +1684,16 @@ static int __init _omap_gpio_init(void) static const u32 non_wakeup_gpios[] = { 0xe203ffc0, 0x08700040 }; - + if (cpu_is_omap44xx()) { + __raw_writel(0xffffffff, bank->base + + OMAP4_GPIO_IRQSTATUSCLR0); + __raw_writew(0x0015, bank->base + + OMAP4_GPIO_SYSCONFIG); + __raw_writel(0x00000000, bank->base + + OMAP4_GPIO_DEBOUNCENABLE); + /* Initialize interface clock ungated, module enabled */ + __raw_writel(0, bank->base + OMAP4_GPIO_CTRL); + } else { __raw_writel(0x00000000, bank->base + OMAP24XX_GPIO_IRQENABLE1); __raw_writel(0xffffffff, bank->base + OMAP24XX_GPIO_IRQSTATUS1); __raw_writew(0x0015, bank->base + OMAP24XX_GPIO_SYSCONFIG); @@ -1589,12 +1701,12 @@ static int __init _omap_gpio_init(void) /* Initialize interface clock ungated, module enabled */ __raw_writel(0, bank->base + OMAP24XX_GPIO_CTRL); + } if (i < ARRAY_SIZE(non_wakeup_gpios)) bank->non_wakeup_gpios = non_wakeup_gpios[i]; gpio_count = 32; } #endif - /* REVISIT eventually switch from OMAP-specific gpio structs * over to the generic ones */ @@ -1680,13 +1792,19 @@ static int omap_gpio_suspend(struct sys_device *dev, pm_message_t mesg) wake_set = bank->base + OMAP1610_GPIO_SET_WAKEUPENA; break; #endif -#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX) || \ - defined(CONFIG_ARCH_OMAP4) +#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX) case METHOD_GPIO_24XX: wake_status = bank->base + OMAP24XX_GPIO_WAKE_EN; wake_clear = bank->base + OMAP24XX_GPIO_CLEARWKUENA; wake_set = bank->base + OMAP24XX_GPIO_SETWKUENA; break; +#endif +#ifdef CONFIG_ARCH_OMAP4 + case METHOD_GPIO_24XX: + wake_status = bank->base + OMAP4_GPIO_IRQWAKEN0; + wake_clear = bank->base + OMAP4_GPIO_IRQWAKEN0; + wake_set = bank->base + OMAP4_GPIO_IRQWAKEN0; + break; #endif default: continue; @@ -1722,12 +1840,17 @@ static int omap_gpio_resume(struct sys_device *dev) wake_set = bank->base + OMAP1610_GPIO_SET_WAKEUPENA; break; #endif -#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX) || \ - defined(CONFIG_ARCH_OMAP4) +#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX) case METHOD_GPIO_24XX: wake_clear = bank->base + OMAP24XX_GPIO_CLEARWKUENA; wake_set = bank->base + OMAP24XX_GPIO_SETWKUENA; break; +#endif +#ifdef CONFIG_ARCH_OMAP4 + case METHOD_GPIO_24XX: + wake_clear = bank->base + OMAP4_GPIO_IRQWAKEN0; + wake_set = bank->base + OMAP4_GPIO_IRQWAKEN0; + break; #endif default: continue; @@ -1772,20 +1895,28 @@ void omap2_gpio_prepare_for_retention(void) if (!(bank->enabled_non_wakeup_gpios)) continue; -#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX) || \ - defined(CONFIG_ARCH_OMAP4) +#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX) bank->saved_datain = __raw_readl(bank->base + OMAP24XX_GPIO_DATAIN); l1 = __raw_readl(bank->base + OMAP24XX_GPIO_FALLINGDETECT); l2 = __raw_readl(bank->base + OMAP24XX_GPIO_RISINGDETECT); +#endif +#ifdef CONFIG_ARCH_OMAP4 + bank->saved_datain = __raw_readl(bank->base + + OMAP4_GPIO_DATAIN); + l1 = __raw_readl(bank->base + OMAP4_GPIO_FALLINGDETECT); + l2 = __raw_readl(bank->base + OMAP4_GPIO_RISINGDETECT); #endif bank->saved_fallingdetect = l1; bank->saved_risingdetect = l2; l1 &= ~bank->enabled_non_wakeup_gpios; l2 &= ~bank->enabled_non_wakeup_gpios; -#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX) || \ - defined(CONFIG_ARCH_OMAP4) +#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX) __raw_writel(l1, bank->base + OMAP24XX_GPIO_FALLINGDETECT); __raw_writel(l2, bank->base + OMAP24XX_GPIO_RISINGDETECT); +#endif +#ifdef CONFIG_ARCH_OMAP4 + __raw_writel(l1, bank->base + OMAP4_GPIO_FALLINGDETECT); + __raw_writel(l2, bank->base + OMAP4_GPIO_RISINGDETECT); #endif c++; } @@ -1808,33 +1939,49 @@ void omap2_gpio_resume_after_retention(void) if (!(bank->enabled_non_wakeup_gpios)) continue; -#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX) || \ - defined(CONFIG_ARCH_OMAP4) +#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX) __raw_writel(bank->saved_fallingdetect, bank->base + OMAP24XX_GPIO_FALLINGDETECT); __raw_writel(bank->saved_risingdetect, bank->base + OMAP24XX_GPIO_RISINGDETECT); + l = __raw_readl(bank->base + OMAP24XX_GPIO_DATAIN); +#endif +#ifdef CONFIG_ARCH_OMAP4 + __raw_writel(bank->saved_fallingdetect, + bank->base + OMAP4_GPIO_FALLINGDETECT); + __raw_writel(bank->saved_risingdetect, + bank->base + OMAP4_GPIO_RISINGDETECT); + l = __raw_readl(bank->base + OMAP4_GPIO_DATAIN); #endif /* Check if any of the non-wakeup interrupt GPIOs have changed * state. If so, generate an IRQ by software. This is * horribly racy, but it's the best we can do to work around * this silicon bug. */ -#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX) || \ - defined(CONFIG_ARCH_OMAP4) - l = __raw_readl(bank->base + OMAP24XX_GPIO_DATAIN); -#endif l ^= bank->saved_datain; l &= bank->non_wakeup_gpios; if (l) { u32 old0, old1; -#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX) || \ - defined(CONFIG_ARCH_OMAP4) +#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX) old0 = __raw_readl(bank->base + OMAP24XX_GPIO_LEVELDETECT0); old1 = __raw_readl(bank->base + OMAP24XX_GPIO_LEVELDETECT1); __raw_writel(old0 | l, bank->base + OMAP24XX_GPIO_LEVELDETECT0); __raw_writel(old1 | l, bank->base + OMAP24XX_GPIO_LEVELDETECT1); __raw_writel(old0, bank->base + OMAP24XX_GPIO_LEVELDETECT0); __raw_writel(old1, bank->base + OMAP24XX_GPIO_LEVELDETECT1); +#endif +#ifdef CONFIG_ARCH_OMAP4 + old0 = __raw_readl(bank->base + + OMAP4_GPIO_LEVELDETECT0); + old1 = __raw_readl(bank->base + + OMAP4_GPIO_LEVELDETECT1); + __raw_writel(old0 | l, bank->base + + OMAP4_GPIO_LEVELDETECT0); + __raw_writel(old1 | l, bank->base + + OMAP4_GPIO_LEVELDETECT1); + __raw_writel(old0, bank->base + + OMAP4_GPIO_LEVELDETECT0); + __raw_writel(old1, bank->base + + OMAP4_GPIO_LEVELDETECT1); #endif } } -- cgit v1.2.3 From 1b54ab450b180eaeeb0eee6f0f64349246a22c14 Mon Sep 17 00:00:00 2001 From: Jean Delvare Date: Tue, 28 Jul 2009 16:31:39 +0200 Subject: hwmon: (smsc47m1) Differentiate between LPC47M233 and LPC47M292 The SMSC LPC47M233 and LPC47M292 chips have the same device ID but are not compatible. Signed-off-by: Jean Delvare Cc: Juerg Haefliger Acked-by: Hans de Goede --- drivers/hwmon/smsc47m1.c | 11 +++++++++++ 1 file changed, 11 insertions(+) diff --git a/drivers/hwmon/smsc47m1.c b/drivers/hwmon/smsc47m1.c index a92dbb97ee9..ba75bfcf14c 100644 --- a/drivers/hwmon/smsc47m1.c +++ b/drivers/hwmon/smsc47m1.c @@ -86,6 +86,7 @@ superio_exit(void) #define SUPERIO_REG_ACT 0x30 #define SUPERIO_REG_BASE 0x60 #define SUPERIO_REG_DEVID 0x20 +#define SUPERIO_REG_DEVREV 0x21 /* Logical device registers */ @@ -429,6 +430,9 @@ static int __init smsc47m1_find(unsigned short *addr, * The LPC47M292 (device id 0x6B) is somewhat compatible, but it * supports a 3rd fan, and the pin configuration registers are * unfortunately different. + * The LPC47M233 has the same device id (0x6B) but is not compatible. + * We check the high bit of the device revision register to + * differentiate them. */ switch (val) { case 0x51: @@ -448,6 +452,13 @@ static int __init smsc47m1_find(unsigned short *addr, sio_data->type = smsc47m1; break; case 0x6B: + if (superio_inb(SUPERIO_REG_DEVREV) & 0x80) { + pr_debug(DRVNAME ": " + "Found SMSC LPC47M233, unsupported\n"); + superio_exit(); + return -ENODEV; + } + pr_info(DRVNAME ": Found SMSC LPC47M292\n"); sio_data->type = smsc47m2; break; -- cgit v1.2.3 From 8d282497cbf8124d6814d51a74fb13d69531c669 Mon Sep 17 00:00:00 2001 From: Luca Tettamanti Date: Tue, 28 Jul 2009 16:31:39 +0200 Subject: hwmon: (asus_atk0110) Fix upper limit readings On newer Asus boards the "upper" limit of a sensor is encoded as delta from the "lower" limit. Fix the driver to correctly handle this case. Signed-off-by: Luca Tettamanti Tested-by: Alex Macfarlane Smith Signed-off-by: Jean Delvare --- drivers/hwmon/asus_atk0110.c | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-) diff --git a/drivers/hwmon/asus_atk0110.c b/drivers/hwmon/asus_atk0110.c index bff0103610c..fe4fa29c921 100644 --- a/drivers/hwmon/asus_atk0110.c +++ b/drivers/hwmon/asus_atk0110.c @@ -593,7 +593,11 @@ static int atk_add_sensor(struct atk_data *data, union acpi_object *obj) sensor->data = data; sensor->id = flags->integer.value; sensor->limit1 = limit1->integer.value; - sensor->limit2 = limit2->integer.value; + if (data->old_interface) + sensor->limit2 = limit2->integer.value; + else + /* The upper limit is expressed as delta from lower limit */ + sensor->limit2 = sensor->limit1 + limit2->integer.value; snprintf(sensor->input_attr_name, ATTR_NAME_SIZE, "%s%d_input", base_name, start + *num); -- cgit v1.2.3 From 96f699ad09c8b3c55cd229506a9add0047838e3e Mon Sep 17 00:00:00 2001 From: Michele Jr De Candia Date: Tue, 28 Jul 2009 16:33:03 +0200 Subject: i2c/tsl2550: Fix lux value in dark environment I've tested TSL2550 driver and I've found a bug: when light is off, returned value from tsl2550_calculate_lux function is -1 when it should be 0 (sensor correctly read that light was off). I think the bug is that a zero c0 value (approximated value of ch0) is misinterpreted as an error. Signed-off-by: Michele Jr De Candia Acked-by: Rodolfo Giometti Signed-off-by: Jean Delvare --- drivers/i2c/chips/tsl2550.c | 17 ++++++++++------- 1 file changed, 10 insertions(+), 7 deletions(-) diff --git a/drivers/i2c/chips/tsl2550.c b/drivers/i2c/chips/tsl2550.c index 1a9cc135219..b96f3025e58 100644 --- a/drivers/i2c/chips/tsl2550.c +++ b/drivers/i2c/chips/tsl2550.c @@ -27,7 +27,7 @@ #include #define TSL2550_DRV_NAME "tsl2550" -#define DRIVER_VERSION "1.1.1" +#define DRIVER_VERSION "1.1.2" /* * Defines @@ -189,13 +189,16 @@ static int tsl2550_calculate_lux(u8 ch0, u8 ch1) u8 r = 128; /* Avoid division by 0 and count 1 cannot be greater than count 0 */ - if (c0 && (c1 <= c0)) - r = c1 * 128 / c0; + if (c1 <= c0) + if (c0) { + r = c1 * 128 / c0; + + /* Calculate LUX */ + lux = ((c0 - c1) * ratio_lut[r]) / 256; + } else + lux = 0; else - return -1; - - /* Calculate LUX */ - lux = ((c0 - c1) * ratio_lut[r]) / 256; + return -EAGAIN; /* LUX range check */ return lux > TSL2550_MAX_LUX ? TSL2550_MAX_LUX : lux; -- cgit v1.2.3 From 56ad1740d9a8dc271e71fee234be662638c64458 Mon Sep 17 00:00:00 2001 From: Jens Axboe Date: Tue, 28 Jul 2009 22:11:24 +0200 Subject: block: make the end_io functions be non-GPL exports Prior to the change for more sane end_io functions, we exported the helpers with the normal EXPORT_SYMBOL(). That got changed to _GPL() for the new interface. Revert that particular change, on the basis that this is basic functionality and doesn't dip into internal structures. If these exports can't be non-GPL, then we may as well make EXPORT_SYMBOL() imply GPL for everything. Signed-off-by: Jens Axboe --- block/blk-core.c | 12 ++++++------ 1 file changed, 6 insertions(+), 6 deletions(-) diff --git a/block/blk-core.c b/block/blk-core.c index a0c340d239b..e3299a77a0d 100644 --- a/block/blk-core.c +++ b/block/blk-core.c @@ -2136,7 +2136,7 @@ bool blk_end_request(struct request *rq, int error, unsigned int nr_bytes) { return blk_end_bidi_request(rq, error, nr_bytes, 0); } -EXPORT_SYMBOL_GPL(blk_end_request); +EXPORT_SYMBOL(blk_end_request); /** * blk_end_request_all - Helper function for drives to finish the request. @@ -2157,7 +2157,7 @@ void blk_end_request_all(struct request *rq, int error) pending = blk_end_bidi_request(rq, error, blk_rq_bytes(rq), bidi_bytes); BUG_ON(pending); } -EXPORT_SYMBOL_GPL(blk_end_request_all); +EXPORT_SYMBOL(blk_end_request_all); /** * blk_end_request_cur - Helper function to finish the current request chunk. @@ -2175,7 +2175,7 @@ bool blk_end_request_cur(struct request *rq, int error) { return blk_end_request(rq, error, blk_rq_cur_bytes(rq)); } -EXPORT_SYMBOL_GPL(blk_end_request_cur); +EXPORT_SYMBOL(blk_end_request_cur); /** * __blk_end_request - Helper function for drivers to complete the request. @@ -2194,7 +2194,7 @@ bool __blk_end_request(struct request *rq, int error, unsigned int nr_bytes) { return __blk_end_bidi_request(rq, error, nr_bytes, 0); } -EXPORT_SYMBOL_GPL(__blk_end_request); +EXPORT_SYMBOL(__blk_end_request); /** * __blk_end_request_all - Helper function for drives to finish the request. @@ -2215,7 +2215,7 @@ void __blk_end_request_all(struct request *rq, int error) pending = __blk_end_bidi_request(rq, error, blk_rq_bytes(rq), bidi_bytes); BUG_ON(pending); } -EXPORT_SYMBOL_GPL(__blk_end_request_all); +EXPORT_SYMBOL(__blk_end_request_all); /** * __blk_end_request_cur - Helper function to finish the current request chunk. @@ -2234,7 +2234,7 @@ bool __blk_end_request_cur(struct request *rq, int error) { return __blk_end_request(rq, error, blk_rq_cur_bytes(rq)); } -EXPORT_SYMBOL_GPL(__blk_end_request_cur); +EXPORT_SYMBOL(__blk_end_request_cur); void blk_rq_bio_prep(struct request_queue *q, struct request *rq, struct bio *bio) -- cgit v1.2.3 From 0f58b44582001c8bcdb75f36cf85ebbe5170e959 Mon Sep 17 00:00:00 2001 From: Peter Oberparleiter Date: Tue, 14 Jul 2009 17:56:15 +0200 Subject: sysfs: fix hardlink count on device_move Update directory hardlink count when moving kobjects to a new parent. Fixes the following problem which occurs when several devices are moved to the same parent and then unregistered: > ls -laF /sys/devices/css0/defunct/ > total 0 > drwxr-xr-x 4294967295 root root 0 2009-07-14 17:02 ./ > drwxr-xr-x 114 root root 0 2009-07-14 17:02 ../ > drwxr-xr-x 2 root root 0 2009-07-14 17:01 power/ > -rw-r--r-- 1 root root 4096 2009-07-14 17:01 uevent Signed-off-by: Peter Oberparleiter Cc: stable Signed-off-by: Greg Kroah-Hartman --- fs/sysfs/dir.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/fs/sysfs/dir.c b/fs/sysfs/dir.c index d88d0fac9fa..14f2d71ea3c 100644 --- a/fs/sysfs/dir.c +++ b/fs/sysfs/dir.c @@ -939,8 +939,10 @@ again: /* Remove from old parent's list and insert into new parent's list. */ sysfs_unlink_sibling(sd); sysfs_get(new_parent_sd); + drop_nlink(old_parent->d_inode); sysfs_put(sd->s_parent); sd->s_parent = new_parent_sd; + inc_nlink(new_parent->d_inode); sysfs_link_sibling(sd); out_unlock: -- cgit v1.2.3 From 3b4418c67a70278964b063b5e1f56dcb3d0a41f3 Mon Sep 17 00:00:00 2001 From: Ming Lei Date: Sat, 11 Jul 2009 11:11:10 +0800 Subject: driver core: firmware_class:fix memory leak of page pointers array The page pointers array is allocated in fw_realloc_buffer() called by firmware_data_write(), and should be freed in release function of firmware device. Signed-off-by: Ming Lei Reported-by: Catalin Marinas Acked-by: David Woodhouse Signed-off-by: Greg Kroah-Hartman --- drivers/base/firmware_class.c | 1 - 1 file changed, 1 deletion(-) diff --git a/drivers/base/firmware_class.c b/drivers/base/firmware_class.c index f285f441fab..7376367bcb8 100644 --- a/drivers/base/firmware_class.c +++ b/drivers/base/firmware_class.c @@ -180,7 +180,6 @@ static ssize_t firmware_loading_store(struct device *dev, goto err; } /* Pages will be freed by vfree() */ - fw_priv->pages = NULL; fw_priv->page_array_size = 0; fw_priv->nr_pages = 0; complete(&fw_priv->completion); -- cgit v1.2.3 From 4df7b3e0370ab6161ea2f258f51dd7c43bef2bda Mon Sep 17 00:00:00 2001 From: Roel Kluin Date: Wed, 15 Jul 2009 20:29:07 +0200 Subject: Dynamic debug: fix typo: -/-> The member was intended, not the local variable. Signed-off-by: Roel Kluin Cc: Jason Baron Cc: Greg Banks Signed-off-by: Andrew Morton Signed-off-by: Greg Kroah-Hartman --- lib/dynamic_debug.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/lib/dynamic_debug.c b/lib/dynamic_debug.c index 833139ce1e2..e22c148e4b7 100644 --- a/lib/dynamic_debug.c +++ b/lib/dynamic_debug.c @@ -164,7 +164,7 @@ static void ddebug_change(const struct ddebug_query *query, if (!newflags) dt->num_enabled--; - else if (!dp-flags) + else if (!dp->flags) dt->num_enabled++; dp->flags = newflags; if (newflags) { -- cgit v1.2.3 From 79f0313bfc67aa13abb931e8c12a1411f0161a68 Mon Sep 17 00:00:00 2001 From: Xiaotian Feng Date: Fri, 24 Jul 2009 17:31:41 +0800 Subject: driver core: sysdev: do not send KOBJ_ADD uevent if kobject_init_and_add fails If kobject_init_and_add fails, sysdev_register should not send KOBJ_ADD uevent to userspace. Signed-off-by: Xiaotian Feng Signed-off-by: Greg Kroah-Hartman --- drivers/base/sys.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/base/sys.c b/drivers/base/sys.c index 79a9ae5238a..0d903909af7 100644 --- a/drivers/base/sys.c +++ b/drivers/base/sys.c @@ -275,9 +275,9 @@ int sysdev_register(struct sys_device *sysdev) drv->add(sysdev); } mutex_unlock(&sysdev_drivers_lock); + kobject_uevent(&sysdev->kobj, KOBJ_ADD); } - kobject_uevent(&sysdev->kobj, KOBJ_ADD); return error; } -- cgit v1.2.3 From a39ea210ec8c8f6ed381f8dafbe755c57b8f30c3 Mon Sep 17 00:00:00 2001 From: Lucian Adrian Grijincu Date: Mon, 27 Jul 2009 09:06:42 -0700 Subject: driver core: documentation: make it clear that sysfs is optional The original text suggested that sysfs is mandatory and always compiled in the kernel. Signed-off-by: Lucian Adrian Grijincu Signed-off-by: Randy Dunlap Signed-off-by: Greg Kroah-Hartman --- Documentation/filesystems/sysfs.txt | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/Documentation/filesystems/sysfs.txt b/Documentation/filesystems/sysfs.txt index 7e81e37c0b1..b245d524d56 100644 --- a/Documentation/filesystems/sysfs.txt +++ b/Documentation/filesystems/sysfs.txt @@ -23,7 +23,8 @@ interface. Using sysfs ~~~~~~~~~~~ -sysfs is always compiled in. You can access it by doing: +sysfs is always compiled in if CONFIG_SYSFS is defined. You can access +it by doing: mount -t sysfs sysfs /sys -- cgit v1.2.3 From f3a756883ac028c536479e2eb283477fec80c828 Mon Sep 17 00:00:00 2001 From: Bill Pemberton Date: Tue, 14 Jul 2009 15:33:52 -0400 Subject: Staging: serqt_usb2: add missing calls to tty_kref_put() tty_port_tty_get() was called without a corresponding tty_kref_put() in qt_read_bulk_callback() and qt_close(). Signed-off-by: Bill Pemberton Signed-off-by: Greg Kroah-Hartman --- drivers/staging/serqt_usb2/serqt_usb2.c | 15 +++++++++------ 1 file changed, 9 insertions(+), 6 deletions(-) diff --git a/drivers/staging/serqt_usb2/serqt_usb2.c b/drivers/staging/serqt_usb2/serqt_usb2.c index a9bd4106beb..f9ff9c26678 100644 --- a/drivers/staging/serqt_usb2/serqt_usb2.c +++ b/drivers/staging/serqt_usb2/serqt_usb2.c @@ -360,18 +360,18 @@ static void qt_read_bulk_callback(struct urb *urb) if (port_paranoia_check(port, __func__) != 0) { dbg("%s - port_paranoia_check, exiting\n", __func__); qt_port->ReadBulkStopped = 1; - return; + goto exit; } if (!serial) { dbg("%s - bad serial pointer, exiting\n", __func__); - return; + goto exit; } if (qt_port->closePending == 1) { /* Were closing , stop reading */ dbg("%s - (qt_port->closepending == 1\n", __func__); qt_port->ReadBulkStopped = 1; - return; + goto exit; } /* @@ -381,7 +381,7 @@ static void qt_read_bulk_callback(struct urb *urb) */ if (qt_port->RxHolding == 1) { qt_port->ReadBulkStopped = 1; - return; + goto exit; } if (urb->status) { @@ -389,7 +389,7 @@ static void qt_read_bulk_callback(struct urb *urb) dbg("%s - nonzero read bulk status received: %d\n", __func__, urb->status); - return; + goto exit; } if (tty && RxCount) { @@ -463,6 +463,8 @@ static void qt_read_bulk_callback(struct urb *urb) } schedule_work(&port->work); +exit: + tty_kref_put(tty); } /* @@ -1041,7 +1043,7 @@ static void qt_block_until_empty(struct tty_struct *tty, } } -static void qt_close( struct usb_serial_port *port) +static void qt_close(struct usb_serial_port *port) { struct usb_serial *serial = port->serial; struct quatech_port *qt_port; @@ -1068,6 +1070,7 @@ static void qt_close( struct usb_serial_port *port) /* wait up to for transmitter to empty */ if (serial->dev) qt_block_until_empty(tty, qt_port); + tty_kref_put(tty); /* Close uart channel */ status = qt_close_channel(serial, index); -- cgit v1.2.3 From de8f8bd63334fe2014be7d9ab3a81ce9b96e5d19 Mon Sep 17 00:00:00 2001 From: Oliver Neukum Date: Mon, 13 Jul 2009 10:46:57 +0200 Subject: Staging: serqt_usb2: fix memory leak in error case a standard memory leak, as later allocations may fail even if prior allocations did not. Then the prior allocations must be undone. Signed-off-by: Oliver Neukum Signed-off-by: Greg Kroah-Hartman --- drivers/staging/serqt_usb2/serqt_usb2.c | 5 +++++ 1 file changed, 5 insertions(+) diff --git a/drivers/staging/serqt_usb2/serqt_usb2.c b/drivers/staging/serqt_usb2/serqt_usb2.c index f9ff9c26678..0fdf8c6dc64 100644 --- a/drivers/staging/serqt_usb2/serqt_usb2.c +++ b/drivers/staging/serqt_usb2/serqt_usb2.c @@ -738,6 +738,11 @@ static int qt_startup(struct usb_serial *serial) if (!qt_port) { dbg("%s: kmalloc for quatech_port (%d) failed!.", __func__, i); + for(--i; i >= 0; i--) { + port = serial->port[i]; + kfree(usb_get_serial_port_data(port)); + usb_set_serial_port_data(port, NULL); + } return -ENOMEM; } spin_lock_init(&qt_port->lock); -- cgit v1.2.3 From a6a9f81ccc9f5c86ccc22bbed1960a57d0316e8b Mon Sep 17 00:00:00 2001 From: David Rientjes Date: Tue, 16 Jun 2009 16:42:53 -0700 Subject: Staging: android: lowmemorykiller.c: fix it for "oom: move oom_adj value from task_struct to mm_struct" I'm about to merge "oom: move oom_adj value from task_struct to mm_struct", and this fixup is needed to repair linux-next's drivers/staging/android/lowmemorykiller.c. Signed-off-by: Andrew Morton Signed-off-by: Greg Kroah-Hartman --- drivers/staging/android/lowmemorykiller.c | 8 +++++--- 1 file changed, 5 insertions(+), 3 deletions(-) diff --git a/drivers/staging/android/lowmemorykiller.c b/drivers/staging/android/lowmemorykiller.c index fe72240f5a9..f934393f395 100644 --- a/drivers/staging/android/lowmemorykiller.c +++ b/drivers/staging/android/lowmemorykiller.c @@ -96,19 +96,21 @@ static int lowmem_shrink(int nr_to_scan, gfp_t gfp_mask) read_lock(&tasklist_lock); for_each_process(p) { + struct mm_struct *mm; int oom_adj; task_lock(p); - if (!p->mm) { + mm = p->mm; + if (!mm) { task_unlock(p); continue; } - oom_adj = p->oomkilladj; + oom_adj = mm->oom_adj; if (oom_adj < min_adj) { task_unlock(p); continue; } - tasksize = get_mm_rss(p->mm); + tasksize = get_mm_rss(mm); task_unlock(p); if (tasksize <= 0) continue; -- cgit v1.2.3 From 0bfc240575acb8769d0be78facedabd8e3d2c33a Mon Sep 17 00:00:00 2001 From: Greg Kroah-Hartman Date: Sun, 19 Jul 2009 23:37:32 -0700 Subject: staging: remove aten2011 driver This driver is not needed, as the existing mos7840 driver works properly for this device. Thanks to Russell Lang for doing the work to figure this out. Cc: Russell Lang Signed-off-by: Greg Kroah-Hartman --- drivers/staging/Kconfig | 2 - drivers/staging/Makefile | 1 - drivers/staging/uc2322/Kconfig | 10 - drivers/staging/uc2322/Makefile | 1 - drivers/staging/uc2322/TODO | 7 - drivers/staging/uc2322/aten2011.c | 2430 ------------------------------------- 6 files changed, 2451 deletions(-) delete mode 100644 drivers/staging/uc2322/Kconfig delete mode 100644 drivers/staging/uc2322/Makefile delete mode 100644 drivers/staging/uc2322/TODO delete mode 100644 drivers/staging/uc2322/aten2011.c diff --git a/drivers/staging/Kconfig b/drivers/staging/Kconfig index 348bf61a8fe..975ecddbce3 100644 --- a/drivers/staging/Kconfig +++ b/drivers/staging/Kconfig @@ -103,8 +103,6 @@ source "drivers/staging/pohmelfs/Kconfig" source "drivers/staging/stlc45xx/Kconfig" -source "drivers/staging/uc2322/Kconfig" - source "drivers/staging/b3dfg/Kconfig" source "drivers/staging/phison/Kconfig" diff --git a/drivers/staging/Makefile b/drivers/staging/Makefile index 8d61d7b4deb..2241ae1b21e 100644 --- a/drivers/staging/Makefile +++ b/drivers/staging/Makefile @@ -34,7 +34,6 @@ obj-$(CONFIG_ANDROID) += android/ obj-$(CONFIG_DST) += dst/ obj-$(CONFIG_POHMELFS) += pohmelfs/ obj-$(CONFIG_STLC45XX) += stlc45xx/ -obj-$(CONFIG_USB_SERIAL_ATEN2011) += uc2322/ obj-$(CONFIG_B3DFG) += b3dfg/ obj-$(CONFIG_IDE_PHISON) += phison/ obj-$(CONFIG_PLAN9AUTH) += p9auth/ diff --git a/drivers/staging/uc2322/Kconfig b/drivers/staging/uc2322/Kconfig deleted file mode 100644 index 2e0c6e79df2..00000000000 --- a/drivers/staging/uc2322/Kconfig +++ /dev/null @@ -1,10 +0,0 @@ -config USB_SERIAL_ATEN2011 - tristate "ATEN 2011 USB to serial device support" - depends on USB_SERIAL - default N - ---help--- - Say Y here if you want to use a ATEN 2011 dual port USB to serial - adapter. - - To compile this driver as a module, choose M here: the module will be - called aten2011. diff --git a/drivers/staging/uc2322/Makefile b/drivers/staging/uc2322/Makefile deleted file mode 100644 index 49c18d6e579..00000000000 --- a/drivers/staging/uc2322/Makefile +++ /dev/null @@ -1 +0,0 @@ -obj-$(CONFIG_USB_SERIAL_ATEN2011) += aten2011.o diff --git a/drivers/staging/uc2322/TODO b/drivers/staging/uc2322/TODO deleted file mode 100644 index c189a64c418..00000000000 --- a/drivers/staging/uc2322/TODO +++ /dev/null @@ -1,7 +0,0 @@ -TODO: - - checkpatch.pl cleanups - - remove dead and useless code (auditing the tty ioctls to - verify that they really are correct and needed.) - -Please send any patches to Greg Kroah-Hartman and -Russell Lang . diff --git a/drivers/staging/uc2322/aten2011.c b/drivers/staging/uc2322/aten2011.c deleted file mode 100644 index 39d0926d1a9..00000000000 --- a/drivers/staging/uc2322/aten2011.c +++ /dev/null @@ -1,2430 +0,0 @@ -/* - * Aten 2011 USB serial driver for 4 port devices - * - * Copyright (C) 2000 Inside Out Networks - * Copyright (C) 2001-2002, 2009 Greg Kroah-Hartman - * Copyright (C) 2009 Novell Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - */ - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - - -#define ZLP_REG1 0x3A /* Zero_Flag_Reg1 58 */ -#define ZLP_REG2 0x3B /* Zero_Flag_Reg2 59 */ -#define ZLP_REG3 0x3C /* Zero_Flag_Reg3 60 */ -#define ZLP_REG4 0x3D /* Zero_Flag_Reg4 61 */ -#define ZLP_REG5 0x3E /* Zero_Flag_Reg5 62 */ - -/* Interrupt Rotinue Defines */ -#define SERIAL_IIR_RLS 0x06 -#define SERIAL_IIR_RDA 0x04 -#define SERIAL_IIR_CTI 0x0c -#define SERIAL_IIR_THR 0x02 -#define SERIAL_IIR_MS 0x00 - -/* Emulation of the bit mask on the LINE STATUS REGISTER. */ -#define SERIAL_LSR_DR 0x0001 -#define SERIAL_LSR_OE 0x0002 -#define SERIAL_LSR_PE 0x0004 -#define SERIAL_LSR_FE 0x0008 -#define SERIAL_LSR_BI 0x0010 -#define SERIAL_LSR_THRE 0x0020 -#define SERIAL_LSR_TEMT 0x0040 -#define SERIAL_LSR_FIFOERR 0x0080 - -/* MSR bit defines(place holders) */ -#define ATEN_MSR_DELTA_CTS 0x10 -#define ATEN_MSR_DELTA_DSR 0x20 -#define ATEN_MSR_DELTA_RI 0x40 -#define ATEN_MSR_DELTA_CD 0x80 - -/* Serial Port register Address */ -#define RECEIVE_BUFFER_REGISTER ((__u16)(0x00)) -#define TRANSMIT_HOLDING_REGISTER ((__u16)(0x00)) -#define INTERRUPT_ENABLE_REGISTER ((__u16)(0x01)) -#define INTERRUPT_IDENT_REGISTER ((__u16)(0x02)) -#define FIFO_CONTROL_REGISTER ((__u16)(0x02)) -#define LINE_CONTROL_REGISTER ((__u16)(0x03)) -#define MODEM_CONTROL_REGISTER ((__u16)(0x04)) -#define LINE_STATUS_REGISTER ((__u16)(0x05)) -#define MODEM_STATUS_REGISTER ((__u16)(0x06)) -#define SCRATCH_PAD_REGISTER ((__u16)(0x07)) -#define DIVISOR_LATCH_LSB ((__u16)(0x00)) -#define DIVISOR_LATCH_MSB ((__u16)(0x01)) - -#define SP1_REGISTER ((__u16)(0x00)) -#define CONTROL1_REGISTER ((__u16)(0x01)) -#define CLK_MULTI_REGISTER ((__u16)(0x02)) -#define CLK_START_VALUE_REGISTER ((__u16)(0x03)) -#define DCR1_REGISTER ((__u16)(0x04)) -#define GPIO_REGISTER ((__u16)(0x07)) - -#define SERIAL_LCR_DLAB ((__u16)(0x0080)) - -/* - * URB POOL related defines - */ -#define NUM_URBS 16 /* URB Count */ -#define URB_TRANSFER_BUFFER_SIZE 32 /* URB Size */ - -#define USB_VENDOR_ID_ATENINTL 0x0557 -#define ATENINTL_DEVICE_ID_2011 0x2011 -#define ATENINTL_DEVICE_ID_7820 0x7820 - -static struct usb_device_id id_table[] = { - { USB_DEVICE(USB_VENDOR_ID_ATENINTL, ATENINTL_DEVICE_ID_2011) }, - { USB_DEVICE(USB_VENDOR_ID_ATENINTL, ATENINTL_DEVICE_ID_7820) }, - { } /* terminating entry */ -}; -MODULE_DEVICE_TABLE(usb, id_table); - -/* This structure holds all of the local port information */ -struct ATENINTL_port { - int port_num; /*Actual port number in the device(1,2,etc)*/ - __u8 bulk_out_endpoint; /* the bulk out endpoint handle */ - unsigned char *bulk_out_buffer; /* buffer used for the bulk out endpoint */ - struct urb *write_urb; /* write URB for this port */ - __u8 bulk_in_endpoint; /* the bulk in endpoint handle */ - unsigned char *bulk_in_buffer; /* the buffer we use for the bulk in endpoint */ - struct urb *read_urb; /* read URB for this port */ - __u8 shadowLCR; /* last LCR value received */ - __u8 shadowMCR; /* last MCR value received */ - char open; - char chaseResponsePending; - wait_queue_head_t wait_chase; /* for handling sleeping while waiting for chase to finish */ - wait_queue_head_t wait_command; /* for handling sleeping while waiting for command to finish */ - struct async_icount icount; - struct usb_serial_port *port; /* loop back to the owner of this object */ - /*Offsets*/ - __u8 SpRegOffset; - __u8 ControlRegOffset; - __u8 DcrRegOffset; - /* for processing control URBS in interrupt context */ - struct urb *control_urb; - char *ctrl_buf; - int MsrLsr; - - struct urb *write_urb_pool[NUM_URBS]; - /* we pass a pointer to this as the arguement sent to cypress_set_termios old_termios */ - struct ktermios tmp_termios; /* stores the old termios settings */ - spinlock_t lock; /* private lock */ -}; - -/* This structure holds all of the individual serial device information */ -struct ATENINTL_serial { - __u8 interrupt_in_endpoint; /* the interrupt endpoint handle */ - unsigned char *interrupt_in_buffer; /* the buffer we use for the interrupt endpoint */ - struct urb *interrupt_read_urb; /* our interrupt urb */ - __u8 bulk_in_endpoint; /* the bulk in endpoint handle */ - unsigned char *bulk_in_buffer; /* the buffer we use for the bulk in endpoint */ - struct urb *read_urb; /* our bulk read urb */ - __u8 bulk_out_endpoint; /* the bulk out endpoint handle */ - struct usb_serial *serial; /* loop back to the owner of this object */ - int ATEN2011_spectrum_2or4ports; /* this says the number of ports in the device */ - /* Indicates about the no.of opened ports of an individual USB-serial adapater. */ - unsigned int NoOfOpenPorts; - /* a flag for Status endpoint polling */ - unsigned char status_polling_started; -}; - -static void ATEN2011_set_termios(struct tty_struct *tty, - struct usb_serial_port *port, - struct ktermios *old_termios); -static void ATEN2011_change_port_settings(struct tty_struct *tty, - struct ATENINTL_port *ATEN2011_port, - struct ktermios *old_termios); - -/************************************* - * Bit definitions for each register * - *************************************/ -#define LCR_BITS_5 0x00 /* 5 bits/char */ -#define LCR_BITS_6 0x01 /* 6 bits/char */ -#define LCR_BITS_7 0x02 /* 7 bits/char */ -#define LCR_BITS_8 0x03 /* 8 bits/char */ -#define LCR_BITS_MASK 0x03 /* Mask for bits/char field */ - -#define LCR_STOP_1 0x00 /* 1 stop bit */ -#define LCR_STOP_1_5 0x04 /* 1.5 stop bits (if 5 bits/char) */ -#define LCR_STOP_2 0x04 /* 2 stop bits (if 6-8 bits/char) */ -#define LCR_STOP_MASK 0x04 /* Mask for stop bits field */ - -#define LCR_PAR_NONE 0x00 /* No parity */ -#define LCR_PAR_ODD 0x08 /* Odd parity */ -#define LCR_PAR_EVEN 0x18 /* Even parity */ -#define LCR_PAR_MARK 0x28 /* Force parity bit to 1 */ -#define LCR_PAR_SPACE 0x38 /* Force parity bit to 0 */ -#define LCR_PAR_MASK 0x38 /* Mask for parity field */ - -#define LCR_SET_BREAK 0x40 /* Set Break condition */ -#define LCR_DL_ENABLE 0x80 /* Enable access to divisor latch */ - -#define MCR_DTR 0x01 /* Assert DTR */ -#define MCR_RTS 0x02 /* Assert RTS */ -#define MCR_OUT1 0x04 /* Loopback only: Sets state of RI */ -#define MCR_MASTER_IE 0x08 /* Enable interrupt outputs */ -#define MCR_LOOPBACK 0x10 /* Set internal (digital) loopback mode */ -#define MCR_XON_ANY 0x20 /* Enable any char to exit XOFF mode */ - -#define ATEN2011_MSR_CTS 0x10 /* Current state of CTS */ -#define ATEN2011_MSR_DSR 0x20 /* Current state of DSR */ -#define ATEN2011_MSR_RI 0x40 /* Current state of RI */ -#define ATEN2011_MSR_CD 0x80 /* Current state of CD */ - - -static int debug; - -/* - * Version Information - */ -#define DRIVER_VERSION "2.0" -#define DRIVER_DESC "ATENINTL 2011 USB Serial Adapter" - -/* - * Defines used for sending commands to port - */ - -#define ATEN_WDR_TIMEOUT (50) /* default urb timeout */ - -/* Requests */ -#define ATEN_RD_RTYPE 0xC0 -#define ATEN_WR_RTYPE 0x40 -#define ATEN_RDREQ 0x0D -#define ATEN_WRREQ 0x0E -#define ATEN_CTRL_TIMEOUT 500 -#define VENDOR_READ_LENGTH (0x01) - -/* set to 1 for RS485 mode and 0 for RS232 mode */ -/* FIXME make this somehow dynamic and not build time specific */ -static int RS485mode; - -static int set_reg_sync(struct usb_serial_port *port, __u16 reg, __u16 val) -{ - struct usb_device *dev = port->serial->dev; - val = val & 0x00ff; - - dbg("%s: is %x, value %x", __func__, reg, val); - - return usb_control_msg(dev, usb_sndctrlpipe(dev, 0), ATEN_WRREQ, - ATEN_WR_RTYPE, val, reg, NULL, 0, - ATEN_WDR_TIMEOUT); -} - -static int get_reg_sync(struct usb_serial_port *port, __u16 reg, __u16 *val) -{ - struct usb_device *dev = port->serial->dev; - int ret; - - ret = usb_control_msg(dev, usb_rcvctrlpipe(dev, 0), ATEN_RDREQ, - ATEN_RD_RTYPE, 0, reg, val, VENDOR_READ_LENGTH, - ATEN_WDR_TIMEOUT); - dbg("%s: offset is %x, return val %x", __func__, reg, *val); - *val = (*val) & 0x00ff; - return ret; -} - -static int set_uart_reg(struct usb_serial_port *port, __u16 reg, __u16 val) -{ - struct usb_device *dev = port->serial->dev; - struct ATENINTL_serial *a_serial; - __u16 minor; - - a_serial = usb_get_serial_data(port->serial); - minor = port->serial->minor; - if (minor == SERIAL_TTY_NO_MINOR) - minor = 0; - val = val & 0x00ff; - - /* - * For the UART control registers, - * the application number need to be Or'ed - */ - if (a_serial->ATEN2011_spectrum_2or4ports == 4) - val |= (((__u16)port->number - minor) + 1) << 8; - else { - if (((__u16) port->number - minor) == 0) - val |= (((__u16)port->number - minor) + 1) << 8; - else - val |= (((__u16)port->number - minor) + 2) << 8; - } - dbg("%s: application number is %x", __func__, val); - - return usb_control_msg(dev, usb_sndctrlpipe(dev, 0), ATEN_WRREQ, - ATEN_WR_RTYPE, val, reg, NULL, 0, - ATEN_WDR_TIMEOUT); -} - -static int get_uart_reg(struct usb_serial_port *port, __u16 reg, __u16 *val) -{ - struct usb_device *dev = port->serial->dev; - int ret = 0; - __u16 wval; - struct ATENINTL_serial *a_serial; - __u16 minor = port->serial->minor; - - a_serial = usb_get_serial_data(port->serial); - if (minor == SERIAL_TTY_NO_MINOR) - minor = 0; - - /* wval is same as application number */ - if (a_serial->ATEN2011_spectrum_2or4ports == 4) - wval = (((__u16)port->number - minor) + 1) << 8; - else { - if (((__u16) port->number - minor) == 0) - wval = (((__u16) port->number - minor) + 1) << 8; - else - wval = (((__u16) port->number - minor) + 2) << 8; - } - dbg("%s: application number is %x", __func__, wval); - ret = usb_control_msg(dev, usb_rcvctrlpipe(dev, 0), ATEN_RDREQ, - ATEN_RD_RTYPE, wval, reg, val, VENDOR_READ_LENGTH, - ATEN_WDR_TIMEOUT); - *val = (*val) & 0x00ff; - return ret; -} - -static int handle_newMsr(struct ATENINTL_port *port, __u8 newMsr) -{ - struct ATENINTL_port *ATEN2011_port; - struct async_icount *icount; - ATEN2011_port = port; - icount = &ATEN2011_port->icount; - if (newMsr & - (ATEN_MSR_DELTA_CTS | ATEN_MSR_DELTA_DSR | ATEN_MSR_DELTA_RI | - ATEN_MSR_DELTA_CD)) { - icount = &ATEN2011_port->icount; - - /* update input line counters */ - if (newMsr & ATEN_MSR_DELTA_CTS) - icount->cts++; - if (newMsr & ATEN_MSR_DELTA_DSR) - icount->dsr++; - if (newMsr & ATEN_MSR_DELTA_CD) - icount->dcd++; - if (newMsr & ATEN_MSR_DELTA_RI) - icount->rng++; - } - - return 0; -} - -static int handle_newLsr(struct ATENINTL_port *port, __u8 newLsr) -{ - struct async_icount *icount; - - dbg("%s - %02x", __func__, newLsr); - - if (newLsr & SERIAL_LSR_BI) { - /* - * Parity and Framing errors only count if they occur exclusive - * of a break being received. - */ - newLsr &= (__u8) (SERIAL_LSR_OE | SERIAL_LSR_BI); - } - - /* update input line counters */ - icount = &port->icount; - if (newLsr & SERIAL_LSR_BI) - icount->brk++; - if (newLsr & SERIAL_LSR_OE) - icount->overrun++; - if (newLsr & SERIAL_LSR_PE) - icount->parity++; - if (newLsr & SERIAL_LSR_FE) - icount->frame++; - - return 0; -} - -static void ATEN2011_control_callback(struct urb *urb) -{ - unsigned char *data; - struct ATENINTL_port *ATEN2011_port; - __u8 regval = 0x0; - - switch (urb->status) { - case 0: - /* success */ - break; - case -ECONNRESET: - case -ENOENT: - case -ESHUTDOWN: - /* this urb is terminated, clean up */ - dbg("%s - urb shutting down with status: %d", __func__, - urb->status); - return; - default: - dbg("%s - nonzero urb status received: %d", __func__, - urb->status); - goto exit; - } - - ATEN2011_port = (struct ATENINTL_port *)urb->context; - - dbg("%s urb buffer size is %d", __func__, urb->actual_length); - dbg("%s ATEN2011_port->MsrLsr is %d port %d", __func__, - ATEN2011_port->MsrLsr, ATEN2011_port->port_num); - data = urb->transfer_buffer; - regval = (__u8) data[0]; - dbg("%s data is %x", __func__, regval); - if (ATEN2011_port->MsrLsr == 0) - handle_newMsr(ATEN2011_port, regval); - else if (ATEN2011_port->MsrLsr == 1) - handle_newLsr(ATEN2011_port, regval); - -exit: - return; -} - -static int ATEN2011_get_reg(struct ATENINTL_port *ATEN, __u16 Wval, __u16 reg, - __u16 *val) -{ - struct usb_device *dev = ATEN->port->serial->dev; - struct usb_ctrlrequest *dr = NULL; - unsigned char *buffer = NULL; - int ret = 0; - buffer = (__u8 *) ATEN->ctrl_buf; - - dr = (void *)(buffer + 2); - dr->bRequestType = ATEN_RD_RTYPE; - dr->bRequest = ATEN_RDREQ; - dr->wValue = cpu_to_le16(Wval); - dr->wIndex = cpu_to_le16(reg); - dr->wLength = cpu_to_le16(2); - - usb_fill_control_urb(ATEN->control_urb, dev, usb_rcvctrlpipe(dev, 0), - (unsigned char *)dr, buffer, 2, - ATEN2011_control_callback, ATEN); - ATEN->control_urb->transfer_buffer_length = 2; - ret = usb_submit_urb(ATEN->control_urb, GFP_ATOMIC); - return ret; -} - -static void ATEN2011_interrupt_callback(struct urb *urb) -{ - int result; - int length; - struct ATENINTL_port *ATEN2011_port; - struct ATENINTL_serial *ATEN2011_serial; - struct usb_serial *serial; - __u16 Data; - unsigned char *data; - __u8 sp[5], st; - int i; - __u16 wval; - int minor; - - dbg("%s", " : Entering"); - - ATEN2011_serial = (struct ATENINTL_serial *)urb->context; - - switch (urb->status) { - case 0: - /* success */ - break; - case -ECONNRESET: - case -ENOENT: - case -ESHUTDOWN: - /* this urb is terminated, clean up */ - dbg("%s - urb shutting down with status: %d", __func__, - urb->status); - return; - default: - dbg("%s - nonzero urb status received: %d", __func__, - urb->status); - goto exit; - } - length = urb->actual_length; - data = urb->transfer_buffer; - - serial = ATEN2011_serial->serial; - - /* ATENINTL get 5 bytes - * Byte 1 IIR Port 1 (port.number is 0) - * Byte 2 IIR Port 2 (port.number is 1) - * Byte 3 IIR Port 3 (port.number is 2) - * Byte 4 IIR Port 4 (port.number is 3) - * Byte 5 FIFO status for both */ - - if (length && length > 5) { - dbg("%s", "Wrong data !!!"); - return; - } - - /* MATRIX */ - if (ATEN2011_serial->ATEN2011_spectrum_2or4ports == 4) { - sp[0] = (__u8) data[0]; - sp[1] = (__u8) data[1]; - sp[2] = (__u8) data[2]; - sp[3] = (__u8) data[3]; - st = (__u8) data[4]; - } else { - sp[0] = (__u8) data[0]; - sp[1] = (__u8) data[2]; - /* sp[2]=(__u8)data[2]; */ - /* sp[3]=(__u8)data[3]; */ - st = (__u8) data[4]; - - } - for (i = 0; i < serial->num_ports; i++) { - ATEN2011_port = usb_get_serial_port_data(serial->port[i]); - minor = serial->minor; - if (minor == SERIAL_TTY_NO_MINOR) - minor = 0; - if ((ATEN2011_serial->ATEN2011_spectrum_2or4ports == 2) - && (i != 0)) - wval = - (((__u16) serial->port[i]->number - - (__u16) (minor)) + 2) << 8; - else - wval = - (((__u16) serial->port[i]->number - - (__u16) (minor)) + 1) << 8; - if (ATEN2011_port->open != 0) { - if (sp[i] & 0x01) { - dbg("SP%d No Interrupt !!!", i); - } else { - switch (sp[i] & 0x0f) { - case SERIAL_IIR_RLS: - dbg("Serial Port %d: Receiver status error or address bit detected in 9-bit mode", i); - ATEN2011_port->MsrLsr = 1; - ATEN2011_get_reg(ATEN2011_port, wval, - LINE_STATUS_REGISTER, - &Data); - break; - case SERIAL_IIR_MS: - dbg("Serial Port %d: Modem status change", i); - ATEN2011_port->MsrLsr = 0; - ATEN2011_get_reg(ATEN2011_port, wval, - MODEM_STATUS_REGISTER, - &Data); - break; - } - } - } - - } -exit: - if (ATEN2011_serial->status_polling_started == 0) - return; - - result = usb_submit_urb(urb, GFP_ATOMIC); - if (result) { - dev_err(&urb->dev->dev, - "%s - Error %d submitting interrupt urb\n", - __func__, result); - } - - return; -} - -static void ATEN2011_bulk_in_callback(struct urb *urb) -{ - int status; - unsigned char *data; - struct usb_serial *serial; - struct usb_serial_port *port; - struct ATENINTL_serial *ATEN2011_serial; - struct ATENINTL_port *ATEN2011_port; - struct tty_struct *tty; - - if (urb->status) { - dbg("nonzero read bulk status received: %d", urb->status); - return; - } - - ATEN2011_port = (struct ATENINTL_port *)urb->context; - - port = (struct usb_serial_port *)ATEN2011_port->port; - serial = port->serial; - - dbg("%s", "Entering..."); - - data = urb->transfer_buffer; - ATEN2011_serial = usb_get_serial_data(serial); - - if (urb->actual_length) { - tty = tty_port_tty_get(&ATEN2011_port->port->port); - if (tty) { - tty_buffer_request_room(tty, urb->actual_length); - tty_insert_flip_string(tty, data, urb->actual_length); - tty_flip_buffer_push(tty); - tty_kref_put(tty); - } - - ATEN2011_port->icount.rx += urb->actual_length; - dbg("ATEN2011_port->icount.rx is %d:", - ATEN2011_port->icount.rx); - } - - if (!ATEN2011_port->read_urb) { - dbg("%s", "URB KILLED !!!"); - return; - } - - if (ATEN2011_port->read_urb->status != -EINPROGRESS) { - ATEN2011_port->read_urb->dev = serial->dev; - - status = usb_submit_urb(ATEN2011_port->read_urb, GFP_ATOMIC); - if (status) - dbg("usb_submit_urb(read bulk) failed, status = %d", status); - } -} - -static void ATEN2011_bulk_out_data_callback(struct urb *urb) -{ - struct ATENINTL_port *ATEN2011_port; - struct tty_struct *tty; - - if (urb->status) { - dbg("nonzero write bulk status received:%d", urb->status); - return; - } - - ATEN2011_port = (struct ATENINTL_port *)urb->context; - - dbg("%s", "Entering ........."); - - tty = tty_port_tty_get(&ATEN2011_port->port->port); - - if (tty && ATEN2011_port->open) - /* tell the tty driver that something has changed */ - tty_wakeup(tty); - - /* schedule_work(&ATEN2011_port->port->work); */ - tty_kref_put(tty); - -} - -#ifdef ATENSerialProbe -static int ATEN2011_serial_probe(struct usb_serial *serial, - const struct usb_device_id *id) -{ - - /*need to implement the mode_reg reading and updating\ - structures usb_serial_ device_type\ - (i.e num_ports, num_bulkin,bulkout etc) */ - /* Also we can update the changes attach */ - return 1; -} -#endif - -static int ATEN2011_open(struct tty_struct *tty, struct usb_serial_port *port, - struct file *filp) -{ - int response; - int j; - struct usb_serial *serial; - struct urb *urb; - __u16 Data; - int status; - struct ATENINTL_serial *ATEN2011_serial; - struct ATENINTL_port *ATEN2011_port; - struct ktermios tmp_termios; - int minor; - - serial = port->serial; - - ATEN2011_port = usb_get_serial_port_data(port); - - if (ATEN2011_port == NULL) - return -ENODEV; - - ATEN2011_serial = usb_get_serial_data(serial); - if (ATEN2011_serial == NULL) - return -ENODEV; - - /* increment the number of opened ports counter here */ - ATEN2011_serial->NoOfOpenPorts++; - - usb_clear_halt(serial->dev, port->write_urb->pipe); - usb_clear_halt(serial->dev, port->read_urb->pipe); - - /* Initialising the write urb pool */ - for (j = 0; j < NUM_URBS; ++j) { - urb = usb_alloc_urb(0, GFP_ATOMIC); - ATEN2011_port->write_urb_pool[j] = urb; - - if (urb == NULL) { - err("No more urbs???"); - continue; - } - - urb->transfer_buffer = NULL; - urb->transfer_buffer = - kmalloc(URB_TRANSFER_BUFFER_SIZE, GFP_KERNEL); - if (!urb->transfer_buffer) { - err("%s-out of memory for urb buffers.", __func__); - continue; - } - } - -/***************************************************************************** - * Initialize ATEN2011 -- Write Init values to corresponding Registers - * - * Register Index - * 1 : IER - * 2 : FCR - * 3 : LCR - * 4 : MCR - * - * 0x08 : SP1/2 Control Reg - *****************************************************************************/ - -/* NEED to check the fallowing Block */ - - Data = 0x0; - status = get_reg_sync(port, ATEN2011_port->SpRegOffset, &Data); - if (status < 0) { - dbg("Reading Spreg failed"); - return -1; - } - Data |= 0x80; - status = set_reg_sync(port, ATEN2011_port->SpRegOffset, Data); - if (status < 0) { - dbg("writing Spreg failed"); - return -1; - } - - Data &= ~0x80; - status = set_reg_sync(port, ATEN2011_port->SpRegOffset, Data); - if (status < 0) { - dbg("writing Spreg failed"); - return -1; - } - -/* End of block to be checked */ -/**************************CHECK***************************/ - - if (RS485mode == 0) - Data = 0xC0; - else - Data = 0x00; - status = set_uart_reg(port, SCRATCH_PAD_REGISTER, Data); - if (status < 0) { - dbg("Writing SCRATCH_PAD_REGISTER failed status-0x%x", status); - return -1; - } else - dbg("SCRATCH_PAD_REGISTER Writing success status%d", status); - -/**************************CHECK***************************/ - - Data = 0x0; - status = get_reg_sync(port, ATEN2011_port->ControlRegOffset, &Data); - if (status < 0) { - dbg("Reading Controlreg failed"); - return -1; - } - Data |= 0x08; /* Driver done bit */ - Data |= 0x20; /* rx_disable */ - status = 0; - status = - set_reg_sync(port, ATEN2011_port->ControlRegOffset, Data); - if (status < 0) { - dbg("writing Controlreg failed"); - return -1; - } - /* - * do register settings here - * Set all regs to the device default values. - * First Disable all interrupts. - */ - - Data = 0x00; - status = set_uart_reg(port, INTERRUPT_ENABLE_REGISTER, Data); - if (status < 0) { - dbg("disableing interrupts failed"); - return -1; - } - /* Set FIFO_CONTROL_REGISTER to the default value */ - Data = 0x00; - status = set_uart_reg(port, FIFO_CONTROL_REGISTER, Data); - if (status < 0) { - dbg("Writing FIFO_CONTROL_REGISTER failed"); - return -1; - } - - Data = 0xcf; /* chk */ - status = set_uart_reg(port, FIFO_CONTROL_REGISTER, Data); - if (status < 0) { - dbg("Writing FIFO_CONTROL_REGISTER failed"); - return -1; - } - - Data = 0x03; /* LCR_BITS_8 */ - status = set_uart_reg(port, LINE_CONTROL_REGISTER, Data); - ATEN2011_port->shadowLCR = Data; - - Data = 0x0b; /* MCR_DTR|MCR_RTS|MCR_MASTER_IE */ - status = set_uart_reg(port, MODEM_CONTROL_REGISTER, Data); - ATEN2011_port->shadowMCR = Data; - -#ifdef Check - Data = 0x00; - status = get_uart_reg(port, LINE_CONTROL_REGISTER, &Data); - ATEN2011_port->shadowLCR = Data; - - Data |= SERIAL_LCR_DLAB; /* data latch enable in LCR 0x80 */ - status = set_uart_reg(port, LINE_CONTROL_REGISTER, Data); - - Data = 0x0c; - status = set_uart_reg(port, DIVISOR_LATCH_LSB, Data); - - Data = 0x0; - status = set_uart_reg(port, DIVISOR_LATCH_MSB, Data); - - Data = 0x00; - status = get_uart_reg(port, LINE_CONTROL_REGISTER, &Data); - -/* Data = ATEN2011_port->shadowLCR; */ /* data latch disable */ - Data = Data & ~SERIAL_LCR_DLAB; - status = set_uart_reg(port, LINE_CONTROL_REGISTER, Data); - ATEN2011_port->shadowLCR = Data; -#endif - /* clearing Bulkin and Bulkout Fifo */ - Data = 0x0; - status = get_reg_sync(port, ATEN2011_port->SpRegOffset, &Data); - - Data = Data | 0x0c; - status = set_reg_sync(port, ATEN2011_port->SpRegOffset, Data); - - Data = Data & ~0x0c; - status = set_reg_sync(port, ATEN2011_port->SpRegOffset, Data); - /* Finally enable all interrupts */ - Data = 0x0; - Data = 0x0c; - status = set_uart_reg(port, INTERRUPT_ENABLE_REGISTER, Data); - - /* clearing rx_disable */ - Data = 0x0; - status = get_reg_sync(port, ATEN2011_port->ControlRegOffset, &Data); - Data = Data & ~0x20; - status = set_reg_sync(port, ATEN2011_port->ControlRegOffset, Data); - - /* rx_negate */ - Data = 0x0; - status = get_reg_sync(port, ATEN2011_port->ControlRegOffset, &Data); - Data = Data | 0x10; - status = 0; - status = set_reg_sync(port, ATEN2011_port->ControlRegOffset, Data); - - /* - * Check to see if we've set up our endpoint info yet - * (can't set it up in ATEN2011_startup as the structures - * were not set up at that time.) - */ - if (ATEN2011_serial->NoOfOpenPorts == 1) { - /* start the status polling here */ - ATEN2011_serial->status_polling_started = 1; - /* If not yet set, Set here */ - ATEN2011_serial->interrupt_in_buffer = - serial->port[0]->interrupt_in_buffer; - ATEN2011_serial->interrupt_in_endpoint = - serial->port[0]->interrupt_in_endpointAddress; - ATEN2011_serial->interrupt_read_urb = - serial->port[0]->interrupt_in_urb; - - /* set up interrupt urb */ - usb_fill_int_urb(ATEN2011_serial->interrupt_read_urb, - serial->dev, - usb_rcvintpipe(serial->dev, - ATEN2011_serial-> - interrupt_in_endpoint), - ATEN2011_serial->interrupt_in_buffer, - ATEN2011_serial->interrupt_read_urb-> - transfer_buffer_length, - ATEN2011_interrupt_callback, ATEN2011_serial, - ATEN2011_serial->interrupt_read_urb->interval); - - /* start interrupt read for ATEN2011 * - * will continue as long as ATEN2011 is connected */ - - response = - usb_submit_urb(ATEN2011_serial->interrupt_read_urb, - GFP_KERNEL); - if (response) { - dbg("%s - Error %d submitting interrupt urb", - __func__, response); - } - - } - - /* - * See if we've set up our endpoint info yet - * (can't set it up in ATEN2011_startup as the - * structures were not set up at that time.) - */ - - dbg("port number is %d", port->number); - dbg("serial number is %d", port->serial->minor); - dbg("Bulkin endpoint is %d", port->bulk_in_endpointAddress); - dbg("BulkOut endpoint is %d", port->bulk_out_endpointAddress); - dbg("Interrupt endpoint is %d", - port->interrupt_in_endpointAddress); - dbg("port's number in the device is %d", ATEN2011_port->port_num); - ATEN2011_port->bulk_in_buffer = port->bulk_in_buffer; - ATEN2011_port->bulk_in_endpoint = port->bulk_in_endpointAddress; - ATEN2011_port->read_urb = port->read_urb; - ATEN2011_port->bulk_out_endpoint = port->bulk_out_endpointAddress; - - minor = port->serial->minor; - if (minor == SERIAL_TTY_NO_MINOR) - minor = 0; - - /* set up our bulk in urb */ - if ((ATEN2011_serial->ATEN2011_spectrum_2or4ports == 2) - && (((__u16) port->number - (__u16) (minor)) != 0)) { - usb_fill_bulk_urb(ATEN2011_port->read_urb, serial->dev, - usb_rcvbulkpipe(serial->dev, - (port-> - bulk_in_endpointAddress + - 2)), port->bulk_in_buffer, - ATEN2011_port->read_urb-> - transfer_buffer_length, - ATEN2011_bulk_in_callback, ATEN2011_port); - } else - usb_fill_bulk_urb(ATEN2011_port->read_urb, - serial->dev, - usb_rcvbulkpipe(serial->dev, - port-> - bulk_in_endpointAddress), - port->bulk_in_buffer, - ATEN2011_port->read_urb-> - transfer_buffer_length, - ATEN2011_bulk_in_callback, ATEN2011_port); - - dbg("ATEN2011_open: bulkin endpoint is %d", - port->bulk_in_endpointAddress); - response = usb_submit_urb(ATEN2011_port->read_urb, GFP_KERNEL); - if (response) { - err("%s - Error %d submitting control urb", __func__, - response); - } - - /* initialize our wait queues */ - init_waitqueue_head(&ATEN2011_port->wait_chase); - init_waitqueue_head(&ATEN2011_port->wait_command); - - /* initialize our icount structure */ - memset(&(ATEN2011_port->icount), 0x00, sizeof(ATEN2011_port->icount)); - - /* initialize our port settings */ - ATEN2011_port->shadowMCR = MCR_MASTER_IE; /* Must set to enable ints! */ - ATEN2011_port->chaseResponsePending = 0; - /* send a open port command */ - ATEN2011_port->open = 1; - /* ATEN2011_change_port_settings(ATEN2011_port,old_termios); */ - /* Setup termios */ - ATEN2011_set_termios(tty, port, &tmp_termios); - ATEN2011_port->icount.tx = 0; - ATEN2011_port->icount.rx = 0; - - dbg("usb_serial serial:%x ATEN2011_port:%x\nATEN2011_serial:%x usb_serial_port port:%x", - (unsigned int)serial, (unsigned int)ATEN2011_port, - (unsigned int)ATEN2011_serial, (unsigned int)port); - - return 0; - -} - -static int ATEN2011_chars_in_buffer(struct tty_struct *tty) -{ - struct usb_serial_port *port = tty->driver_data; - int i; - int chars = 0; - struct ATENINTL_port *ATEN2011_port; - - /* dbg("%s"," ATEN2011_chars_in_buffer:entering ..........."); */ - - ATEN2011_port = usb_get_serial_port_data(port); - if (ATEN2011_port == NULL) { - dbg("%s", "ATEN2011_break:leaving ..........."); - return -1; - } - - for (i = 0; i < NUM_URBS; ++i) - if (ATEN2011_port->write_urb_pool[i]->status == -EINPROGRESS) - chars += URB_TRANSFER_BUFFER_SIZE; - - dbg("%s - returns %d", __func__, chars); - return chars; - -} - -static void ATEN2011_block_until_tx_empty(struct tty_struct *tty, - struct ATENINTL_port *ATEN2011_port) -{ - int timeout = HZ / 10; - int wait = 30; - int count; - - while (1) { - count = ATEN2011_chars_in_buffer(tty); - - /* Check for Buffer status */ - if (count <= 0) - return; - - /* Block the thread for a while */ - interruptible_sleep_on_timeout(&ATEN2011_port->wait_chase, - timeout); - - /* No activity.. count down section */ - wait--; - if (wait == 0) { - dbg("%s - TIMEOUT", __func__); - return; - } else { - /* Reset timout value back to seconds */ - wait = 30; - } - } -} - -static void ATEN2011_close(struct tty_struct *tty, struct usb_serial_port *port, - struct file *filp) -{ - struct usb_serial *serial; - struct ATENINTL_serial *ATEN2011_serial; - struct ATENINTL_port *ATEN2011_port; - int no_urbs; - __u16 Data; - - dbg("%s", "ATEN2011_close:entering..."); - serial = port->serial; - - /* take the Adpater and port's private data */ - ATEN2011_serial = usb_get_serial_data(serial); - ATEN2011_port = usb_get_serial_port_data(port); - if ((ATEN2011_serial == NULL) || (ATEN2011_port == NULL)) - return; - - if (serial->dev) { - /* flush and block(wait) until tx is empty */ - ATEN2011_block_until_tx_empty(tty, ATEN2011_port); - } - /* kill the ports URB's */ - for (no_urbs = 0; no_urbs < NUM_URBS; no_urbs++) - usb_kill_urb(ATEN2011_port->write_urb_pool[no_urbs]); - /* Freeing Write URBs */ - for (no_urbs = 0; no_urbs < NUM_URBS; ++no_urbs) { - kfree(ATEN2011_port->write_urb_pool[no_urbs]->transfer_buffer); - usb_free_urb(ATEN2011_port->write_urb_pool[no_urbs]); - } - /* While closing port, shutdown all bulk read, write * - * and interrupt read if they exists */ - if (serial->dev) { - if (ATEN2011_port->write_urb) { - dbg("%s", "Shutdown bulk write"); - usb_kill_urb(ATEN2011_port->write_urb); - } - if (ATEN2011_port->read_urb) { - dbg("%s", "Shutdown bulk read"); - usb_kill_urb(ATEN2011_port->read_urb); - } - if ((&ATEN2011_port->control_urb)) { - dbg("%s", "Shutdown control read"); - /* usb_kill_urb (ATEN2011_port->control_urb); */ - - } - } - /* if(ATEN2011_port->ctrl_buf != NULL) */ - /* kfree(ATEN2011_port->ctrl_buf); */ - /* decrement the no.of open ports counter of an individual USB-serial adapter. */ - ATEN2011_serial->NoOfOpenPorts--; - dbg("NoOfOpenPorts in close%d:in port%d", - ATEN2011_serial->NoOfOpenPorts, port->number); - if (ATEN2011_serial->NoOfOpenPorts == 0) { - /* stop the stus polling here */ - ATEN2011_serial->status_polling_started = 0; - if (ATEN2011_serial->interrupt_read_urb) { - dbg("%s", "Shutdown interrupt_read_urb"); - /* ATEN2011_serial->interrupt_in_buffer=NULL; */ - /* usb_kill_urb (ATEN2011_serial->interrupt_read_urb); */ - } - } - if (ATEN2011_port->write_urb) { - /* if this urb had a transfer buffer already (old tx) free it */ - kfree(ATEN2011_port->write_urb->transfer_buffer); - usb_free_urb(ATEN2011_port->write_urb); - } - - /* clear the MCR & IER */ - Data = 0x00; - set_uart_reg(port, MODEM_CONTROL_REGISTER, Data); - Data = 0x00; - set_uart_reg(port, INTERRUPT_ENABLE_REGISTER, Data); - - ATEN2011_port->open = 0; - dbg("%s", "Leaving ............"); - -} - -static void ATEN2011_block_until_chase_response(struct tty_struct *tty, - struct ATENINTL_port - *ATEN2011_port) -{ - int timeout = 1 * HZ; - int wait = 10; - int count; - - while (1) { - count = ATEN2011_chars_in_buffer(tty); - - /* Check for Buffer status */ - if (count <= 0) { - ATEN2011_port->chaseResponsePending = 0; - return; - } - - /* Block the thread for a while */ - interruptible_sleep_on_timeout(&ATEN2011_port->wait_chase, - timeout); - /* No activity.. count down section */ - wait--; - if (wait == 0) { - dbg("%s - TIMEOUT", __func__); - return; - } else { - /* Reset timout value back to seconds */ - wait = 10; - } - } - -} - -static void ATEN2011_break(struct tty_struct *tty, int break_state) -{ - struct usb_serial_port *port = tty->driver_data; - unsigned char data; - struct usb_serial *serial; - struct ATENINTL_serial *ATEN2011_serial; - struct ATENINTL_port *ATEN2011_port; - - dbg("%s", "Entering ..........."); - dbg("ATEN2011_break: Start"); - - serial = port->serial; - - ATEN2011_serial = usb_get_serial_data(serial); - ATEN2011_port = usb_get_serial_port_data(port); - - if ((ATEN2011_serial == NULL) || (ATEN2011_port == NULL)) - return; - - /* flush and chase */ - ATEN2011_port->chaseResponsePending = 1; - - if (serial->dev) { - /* flush and block until tx is empty */ - ATEN2011_block_until_chase_response(tty, ATEN2011_port); - } - - if (break_state == -1) - data = ATEN2011_port->shadowLCR | LCR_SET_BREAK; - else - data = ATEN2011_port->shadowLCR & ~LCR_SET_BREAK; - - ATEN2011_port->shadowLCR = data; - dbg("ATEN2011_break ATEN2011_port->shadowLCR is %x", - ATEN2011_port->shadowLCR); - set_uart_reg(port, LINE_CONTROL_REGISTER, ATEN2011_port->shadowLCR); - - return; -} - -static int ATEN2011_write_room(struct tty_struct *tty) -{ - struct usb_serial_port *port = tty->driver_data; - int i; - int room = 0; - struct ATENINTL_port *ATEN2011_port; - - ATEN2011_port = usb_get_serial_port_data(port); - if (ATEN2011_port == NULL) { - dbg("%s", "ATEN2011_break:leaving ..........."); - return -1; - } - - for (i = 0; i < NUM_URBS; ++i) - if (ATEN2011_port->write_urb_pool[i]->status != -EINPROGRESS) - room += URB_TRANSFER_BUFFER_SIZE; - - dbg("%s - returns %d", __func__, room); - return room; - -} - -static int ATEN2011_write(struct tty_struct *tty, struct usb_serial_port *port, - const unsigned char *data, int count) -{ - int status; - int i; - int bytes_sent = 0; - int transfer_size; - int minor; - - struct ATENINTL_port *ATEN2011_port; - struct usb_serial *serial; - struct ATENINTL_serial *ATEN2011_serial; - struct urb *urb; - const unsigned char *current_position = data; - unsigned char *data1; - dbg("%s", "entering ..........."); - - serial = port->serial; - - ATEN2011_port = usb_get_serial_port_data(port); - if (ATEN2011_port == NULL) { - dbg("%s", "ATEN2011_port is NULL"); - return -1; - } - - ATEN2011_serial = usb_get_serial_data(serial); - if (ATEN2011_serial == NULL) { - dbg("%s", "ATEN2011_serial is NULL"); - return -1; - } - - /* try to find a free urb in the list */ - urb = NULL; - - for (i = 0; i < NUM_URBS; ++i) { - if (ATEN2011_port->write_urb_pool[i]->status != -EINPROGRESS) { - urb = ATEN2011_port->write_urb_pool[i]; - dbg("URB:%d", i); - break; - } - } - - if (urb == NULL) { - dbg("%s - no more free urbs", __func__); - goto exit; - } - - if (urb->transfer_buffer == NULL) { - urb->transfer_buffer = - kmalloc(URB_TRANSFER_BUFFER_SIZE, GFP_KERNEL); - - if (urb->transfer_buffer == NULL) { - err("%s no more kernel memory...", __func__); - goto exit; - } - } - transfer_size = min(count, URB_TRANSFER_BUFFER_SIZE); - - memcpy(urb->transfer_buffer, current_position, transfer_size); - /* usb_serial_debug_data (__FILE__, __func__, transfer_size, urb->transfer_buffer); */ - - /* fill urb with data and submit */ - minor = port->serial->minor; - if (minor == SERIAL_TTY_NO_MINOR) - minor = 0; - if ((ATEN2011_serial->ATEN2011_spectrum_2or4ports == 2) - && (((__u16) port->number - (__u16) (minor)) != 0)) { - usb_fill_bulk_urb(urb, ATEN2011_serial->serial->dev, - usb_sndbulkpipe(ATEN2011_serial->serial->dev, - (port-> - bulk_out_endpointAddress) + - 2), urb->transfer_buffer, - transfer_size, - ATEN2011_bulk_out_data_callback, - ATEN2011_port); - } else - - usb_fill_bulk_urb(urb, - ATEN2011_serial->serial->dev, - usb_sndbulkpipe(ATEN2011_serial->serial->dev, - port-> - bulk_out_endpointAddress), - urb->transfer_buffer, transfer_size, - ATEN2011_bulk_out_data_callback, - ATEN2011_port); - - data1 = urb->transfer_buffer; - dbg("bulkout endpoint is %d", port->bulk_out_endpointAddress); - /* for(i=0;i < urb->actual_length;i++) */ - /* dbg("Data is %c ",data1[i]); */ - - /* send it down the pipe */ - status = usb_submit_urb(urb, GFP_ATOMIC); - - if (status) { - err("%s - usb_submit_urb(write bulk) failed with status = %d", - __func__, status); - bytes_sent = status; - goto exit; - } - bytes_sent = transfer_size; - ATEN2011_port->icount.tx += transfer_size; - dbg("ATEN2011_port->icount.tx is %d:", ATEN2011_port->icount.tx); - -exit: - return bytes_sent; -} - -static void ATEN2011_throttle(struct tty_struct *tty) -{ - struct usb_serial_port *port = tty->driver_data; - struct ATENINTL_port *ATEN2011_port; - int status; - - dbg("- port %d", port->number); - - ATEN2011_port = usb_get_serial_port_data(port); - - if (ATEN2011_port == NULL) - return; - - if (!ATEN2011_port->open) { - dbg("%s", "port not opened"); - return; - } - - dbg("%s", "Entering .......... "); - - if (!tty) { - dbg("%s - no tty available", __func__); - return; - } - - /* if we are implementing XON/XOFF, send the stop character */ - if (I_IXOFF(tty)) { - unsigned char stop_char = STOP_CHAR(tty); - status = ATEN2011_write(tty, port, &stop_char, 1); - if (status <= 0) - return; - } - - /* if we are implementing RTS/CTS, toggle that line */ - if (tty->termios->c_cflag & CRTSCTS) { - ATEN2011_port->shadowMCR &= ~MCR_RTS; - status = set_uart_reg(port, MODEM_CONTROL_REGISTER, - ATEN2011_port->shadowMCR); - if (status < 0) - return; - } - - return; -} - -static void ATEN2011_unthrottle(struct tty_struct *tty) -{ - struct usb_serial_port *port = tty->driver_data; - int status; - struct ATENINTL_port *ATEN2011_port = usb_get_serial_port_data(port); - - if (ATEN2011_port == NULL) - return; - - if (!ATEN2011_port->open) { - dbg("%s - port not opened", __func__); - return; - } - - dbg("%s", "Entering .......... "); - - if (!tty) { - dbg("%s - no tty available", __func__); - return; - } - - /* if we are implementing XON/XOFF, send the start character */ - if (I_IXOFF(tty)) { - unsigned char start_char = START_CHAR(tty); - status = ATEN2011_write(tty, port, &start_char, 1); - if (status <= 0) - return; - } - - /* if we are implementing RTS/CTS, toggle that line */ - if (tty->termios->c_cflag & CRTSCTS) { - ATEN2011_port->shadowMCR |= MCR_RTS; - status = set_uart_reg(port, MODEM_CONTROL_REGISTER, - ATEN2011_port->shadowMCR); - if (status < 0) - return; - } - - return; -} - -static int ATEN2011_tiocmget(struct tty_struct *tty, struct file *file) -{ - struct usb_serial_port *port = tty->driver_data; - struct ATENINTL_port *ATEN2011_port; - unsigned int result; - __u16 msr; - __u16 mcr; - /* unsigned int mcr; */ - int status = 0; - ATEN2011_port = usb_get_serial_port_data(port); - - dbg("%s - port %d", __func__, port->number); - - if (ATEN2011_port == NULL) - return -ENODEV; - - status = get_uart_reg(port, MODEM_STATUS_REGISTER, &msr); - status = get_uart_reg(port, MODEM_CONTROL_REGISTER, &mcr); - /* mcr = ATEN2011_port->shadowMCR; */ - /* COMMENT2: the Fallowing three line are commented for updating only MSR values */ - result = ((mcr & MCR_DTR) ? TIOCM_DTR : 0) - | ((mcr & MCR_RTS) ? TIOCM_RTS : 0) - | ((mcr & MCR_LOOPBACK) ? TIOCM_LOOP : 0) - | ((msr & ATEN2011_MSR_CTS) ? TIOCM_CTS : 0) - | ((msr & ATEN2011_MSR_CD) ? TIOCM_CAR : 0) - | ((msr & ATEN2011_MSR_RI) ? TIOCM_RI : 0) - | ((msr & ATEN2011_MSR_DSR) ? TIOCM_DSR : 0); - - dbg("%s - 0x%04X", __func__, result); - - return result; -} - -static int ATEN2011_tiocmset(struct tty_struct *tty, struct file *file, - unsigned int set, unsigned int clear) -{ - struct usb_serial_port *port = tty->driver_data; - struct ATENINTL_port *ATEN2011_port; - unsigned int mcr; - unsigned int status; - - dbg("%s - port %d", __func__, port->number); - - ATEN2011_port = usb_get_serial_port_data(port); - - if (ATEN2011_port == NULL) - return -ENODEV; - - mcr = ATEN2011_port->shadowMCR; - if (clear & TIOCM_RTS) - mcr &= ~MCR_RTS; - if (clear & TIOCM_DTR) - mcr &= ~MCR_DTR; - if (clear & TIOCM_LOOP) - mcr &= ~MCR_LOOPBACK; - - if (set & TIOCM_RTS) - mcr |= MCR_RTS; - if (set & TIOCM_DTR) - mcr |= MCR_DTR; - if (set & TIOCM_LOOP) - mcr |= MCR_LOOPBACK; - - ATEN2011_port->shadowMCR = mcr; - - status = set_uart_reg(port, MODEM_CONTROL_REGISTER, mcr); - if (status < 0) { - dbg("setting MODEM_CONTROL_REGISTER Failed"); - return -1; - } - - return 0; -} - -static void ATEN2011_set_termios(struct tty_struct *tty, - struct usb_serial_port *port, - struct ktermios *old_termios) -{ - int status; - unsigned int cflag; - struct usb_serial *serial; - struct ATENINTL_port *ATEN2011_port; - - dbg("ATEN2011_set_termios: START"); - - serial = port->serial; - - ATEN2011_port = usb_get_serial_port_data(port); - - if (ATEN2011_port == NULL) - return; - - if (!ATEN2011_port->open) { - dbg("%s - port not opened", __func__); - return; - } - - dbg("%s", "setting termios - "); - - cflag = tty->termios->c_cflag; - - dbg("%s - cflag %08x iflag %08x", __func__, - tty->termios->c_cflag, RELEVANT_IFLAG(tty->termios->c_iflag)); - - if (old_termios) { - dbg("%s - old clfag %08x old iflag %08x", __func__, - old_termios->c_cflag, RELEVANT_IFLAG(old_termios->c_iflag)); - } - - dbg("%s - port %d", __func__, port->number); - - /* change the port settings to the new ones specified */ - - ATEN2011_change_port_settings(tty, ATEN2011_port, old_termios); - - if (!ATEN2011_port->read_urb) { - dbg("%s", "URB KILLED !!!!!"); - return; - } - - if (ATEN2011_port->read_urb->status != -EINPROGRESS) { - ATEN2011_port->read_urb->dev = serial->dev; - status = usb_submit_urb(ATEN2011_port->read_urb, GFP_ATOMIC); - if (status) { - dbg - (" usb_submit_urb(read bulk) failed, status = %d", - status); - } - } - return; -} - -static int get_lsr_info(struct tty_struct *tty, - struct ATENINTL_port *ATEN2011_port, - unsigned int __user *value) -{ - int count; - unsigned int result = 0; - - count = ATEN2011_chars_in_buffer(tty); - if (count == 0) { - dbg("%s -- Empty", __func__); - result = TIOCSER_TEMT; - } - - if (copy_to_user(value, &result, sizeof(int))) - return -EFAULT; - return 0; -} - -static int get_number_bytes_avail(struct tty_struct *tty, - struct ATENINTL_port *ATEN2011_port, - unsigned int __user *value) -{ - unsigned int result = 0; - - if (!tty) - return -ENOIOCTLCMD; - - result = tty->read_cnt; - - dbg("%s(%d) = %d", __func__, ATEN2011_port->port->number, result); - if (copy_to_user(value, &result, sizeof(int))) - return -EFAULT; - - return -ENOIOCTLCMD; -} - -static int set_modem_info(struct ATENINTL_port *ATEN2011_port, unsigned int cmd, - unsigned int __user *value) -{ - unsigned int mcr; - unsigned int arg; - __u16 Data; - int status; - struct usb_serial_port *port; - - if (ATEN2011_port == NULL) - return -1; - - port = (struct usb_serial_port *)ATEN2011_port->port; - - mcr = ATEN2011_port->shadowMCR; - - if (copy_from_user(&arg, value, sizeof(int))) - return -EFAULT; - - switch (cmd) { - case TIOCMBIS: - if (arg & TIOCM_RTS) - mcr |= MCR_RTS; - if (arg & TIOCM_DTR) - mcr |= MCR_RTS; - if (arg & TIOCM_LOOP) - mcr |= MCR_LOOPBACK; - break; - - case TIOCMBIC: - if (arg & TIOCM_RTS) - mcr &= ~MCR_RTS; - if (arg & TIOCM_DTR) - mcr &= ~MCR_RTS; - if (arg & TIOCM_LOOP) - mcr &= ~MCR_LOOPBACK; - break; - - case TIOCMSET: - /* turn off the RTS and DTR and LOOPBACK - * and then only turn on what was asked to */ - mcr &= ~(MCR_RTS | MCR_DTR | MCR_LOOPBACK); - mcr |= ((arg & TIOCM_RTS) ? MCR_RTS : 0); - mcr |= ((arg & TIOCM_DTR) ? MCR_DTR : 0); - mcr |= ((arg & TIOCM_LOOP) ? MCR_LOOPBACK : 0); - break; - } - - ATEN2011_port->shadowMCR = mcr; - - Data = ATEN2011_port->shadowMCR; - status = set_uart_reg(port, MODEM_CONTROL_REGISTER, Data); - if (status < 0) { - dbg("setting MODEM_CONTROL_REGISTER Failed"); - return -1; - } - - return 0; -} - -static int get_modem_info(struct ATENINTL_port *ATEN2011_port, - unsigned int __user *value) -{ - unsigned int result = 0; - __u16 msr; - unsigned int mcr = ATEN2011_port->shadowMCR; - int status; - - status = get_uart_reg(ATEN2011_port->port, MODEM_STATUS_REGISTER, &msr); - result = ((mcr & MCR_DTR) ? TIOCM_DTR : 0) /* 0x002 */ - |((mcr & MCR_RTS) ? TIOCM_RTS : 0) /* 0x004 */ - |((msr & ATEN2011_MSR_CTS) ? TIOCM_CTS : 0) /* 0x020 */ - |((msr & ATEN2011_MSR_CD) ? TIOCM_CAR : 0) /* 0x040 */ - |((msr & ATEN2011_MSR_RI) ? TIOCM_RI : 0) /* 0x080 */ - |((msr & ATEN2011_MSR_DSR) ? TIOCM_DSR : 0); /* 0x100 */ - - dbg("%s -- %x", __func__, result); - - if (copy_to_user(value, &result, sizeof(int))) - return -EFAULT; - return 0; -} - -static int get_serial_info(struct ATENINTL_port *ATEN2011_port, - struct serial_struct __user *retinfo) -{ - struct serial_struct tmp; - - if (ATEN2011_port == NULL) - return -1; - - if (!retinfo) - return -EFAULT; - - memset(&tmp, 0, sizeof(tmp)); - - tmp.type = PORT_16550A; - tmp.line = ATEN2011_port->port->serial->minor; - if (tmp.line == SERIAL_TTY_NO_MINOR) - tmp.line = 0; - tmp.port = ATEN2011_port->port->number; - tmp.irq = 0; - tmp.flags = ASYNC_SKIP_TEST | ASYNC_AUTO_IRQ; - tmp.xmit_fifo_size = NUM_URBS * URB_TRANSFER_BUFFER_SIZE; - tmp.baud_base = 9600; - tmp.close_delay = 5 * HZ; - tmp.closing_wait = 30 * HZ; - - if (copy_to_user(retinfo, &tmp, sizeof(*retinfo))) - return -EFAULT; - return 0; -} - -static int ATEN2011_ioctl(struct tty_struct *tty, struct file *file, - unsigned int cmd, unsigned long arg) -{ - struct usb_serial_port *port = tty->driver_data; - struct ATENINTL_port *ATEN2011_port; - struct async_icount cnow; - struct async_icount cprev; - struct serial_icounter_struct icount; - int ATENret = 0; - unsigned int __user *user_arg = (unsigned int __user *)arg; - - ATEN2011_port = usb_get_serial_port_data(port); - - if (ATEN2011_port == NULL) - return -1; - - dbg("%s - port %d, cmd = 0x%x", __func__, port->number, cmd); - - switch (cmd) { - /* return number of bytes available */ - - case TIOCINQ: - dbg("%s (%d) TIOCINQ", __func__, port->number); - return get_number_bytes_avail(tty, ATEN2011_port, user_arg); - break; - - case TIOCOUTQ: - dbg("%s (%d) TIOCOUTQ", __func__, port->number); - return put_user(ATEN2011_chars_in_buffer(tty), user_arg); - break; - - case TIOCSERGETLSR: - dbg("%s (%d) TIOCSERGETLSR", __func__, port->number); - return get_lsr_info(tty, ATEN2011_port, user_arg); - return 0; - - case TIOCMBIS: - case TIOCMBIC: - case TIOCMSET: - dbg("%s (%d) TIOCMSET/TIOCMBIC/TIOCMSET", __func__, - port->number); - ATENret = set_modem_info(ATEN2011_port, cmd, user_arg); - return ATENret; - - case TIOCMGET: - dbg("%s (%d) TIOCMGET", __func__, port->number); - return get_modem_info(ATEN2011_port, user_arg); - - case TIOCGSERIAL: - dbg("%s (%d) TIOCGSERIAL", __func__, port->number); - return get_serial_info(ATEN2011_port, - (struct serial_struct __user *)arg); - - case TIOCSSERIAL: - dbg("%s (%d) TIOCSSERIAL", __func__, port->number); - break; - - case TIOCMIWAIT: - dbg("%s (%d) TIOCMIWAIT", __func__, port->number); - cprev = ATEN2011_port->icount; - while (1) { - /* see if a signal did it */ - if (signal_pending(current)) - return -ERESTARTSYS; - cnow = ATEN2011_port->icount; - if (cnow.rng == cprev.rng && cnow.dsr == cprev.dsr && - cnow.dcd == cprev.dcd && cnow.cts == cprev.cts) - return -EIO; /* no change => error */ - if (((arg & TIOCM_RNG) && (cnow.rng != cprev.rng)) || - ((arg & TIOCM_DSR) && (cnow.dsr != cprev.dsr)) || - ((arg & TIOCM_CD) && (cnow.dcd != cprev.dcd)) || - ((arg & TIOCM_CTS) && (cnow.cts != cprev.cts))) { - return 0; - } - cprev = cnow; - } - /* NOTREACHED */ - break; - - case TIOCGICOUNT: - cnow = ATEN2011_port->icount; - icount.cts = cnow.cts; - icount.dsr = cnow.dsr; - icount.rng = cnow.rng; - icount.dcd = cnow.dcd; - icount.rx = cnow.rx; - icount.tx = cnow.tx; - icount.frame = cnow.frame; - icount.overrun = cnow.overrun; - icount.parity = cnow.parity; - icount.brk = cnow.brk; - icount.buf_overrun = cnow.buf_overrun; - - dbg("%s (%d) TIOCGICOUNT RX=%d, TX=%d", __func__, - port->number, icount.rx, icount.tx); - if (copy_to_user((void __user *)arg, &icount, sizeof(icount))) - return -EFAULT; - return 0; - - default: - break; - } - - return -ENOIOCTLCMD; -} - -static int ATEN2011_calc_baud_rate_divisor(int baudRate, int *divisor, - __u16 *clk_sel_val) -{ - dbg("%s - %d", __func__, baudRate); - - if (baudRate <= 115200) { - *divisor = 115200 / baudRate; - *clk_sel_val = 0x0; - } - if ((baudRate > 115200) && (baudRate <= 230400)) { - *divisor = 230400 / baudRate; - *clk_sel_val = 0x10; - } else if ((baudRate > 230400) && (baudRate <= 403200)) { - *divisor = 403200 / baudRate; - *clk_sel_val = 0x20; - } else if ((baudRate > 403200) && (baudRate <= 460800)) { - *divisor = 460800 / baudRate; - *clk_sel_val = 0x30; - } else if ((baudRate > 460800) && (baudRate <= 806400)) { - *divisor = 806400 / baudRate; - *clk_sel_val = 0x40; - } else if ((baudRate > 806400) && (baudRate <= 921600)) { - *divisor = 921600 / baudRate; - *clk_sel_val = 0x50; - } else if ((baudRate > 921600) && (baudRate <= 1572864)) { - *divisor = 1572864 / baudRate; - *clk_sel_val = 0x60; - } else if ((baudRate > 1572864) && (baudRate <= 3145728)) { - *divisor = 3145728 / baudRate; - *clk_sel_val = 0x70; - } - return 0; -} - -static int ATEN2011_send_cmd_write_baud_rate(struct ATENINTL_port - *ATEN2011_port, int baudRate) -{ - int divisor = 0; - int status; - __u16 Data; - unsigned char number; - __u16 clk_sel_val; - struct usb_serial_port *port; - int minor; - - if (ATEN2011_port == NULL) - return -1; - - port = (struct usb_serial_port *)ATEN2011_port->port; - - dbg("%s", "Entering .......... "); - - minor = ATEN2011_port->port->serial->minor; - if (minor == SERIAL_TTY_NO_MINOR) - minor = 0; - number = ATEN2011_port->port->number - minor; - - dbg("%s - port = %d, baud = %d", __func__, - ATEN2011_port->port->number, baudRate); - /* reset clk_uart_sel in spregOffset */ - if (baudRate > 115200) { -#ifdef HW_flow_control - /* - * NOTE: need to see the pther register to modify - * setting h/w flow control bit to 1; - */ - /* Data = ATEN2011_port->shadowMCR; */ - Data = 0x2b; - ATEN2011_port->shadowMCR = Data; - status = set_uart_reg(port, MODEM_CONTROL_REGISTER, Data); - if (status < 0) { - dbg("Writing spreg failed in set_serial_baud"); - return -1; - } -#endif - - } else { -#ifdef HW_flow_control - /* setting h/w flow control bit to 0; */ - /* Data = ATEN2011_port->shadowMCR; */ - Data = 0xb; - ATEN2011_port->shadowMCR = Data; - status = set_uart_reg(port, MODEM_CONTROL_REGISTER, Data); - if (status < 0) { - dbg("Writing spreg failed in set_serial_baud"); - return -1; - } -#endif - - } - - if (1) /* baudRate <= 115200) */ { - clk_sel_val = 0x0; - Data = 0x0; - status = - ATEN2011_calc_baud_rate_divisor(baudRate, &divisor, - &clk_sel_val); - status = get_reg_sync(port, ATEN2011_port->SpRegOffset, &Data); - if (status < 0) { - dbg("reading spreg failed in set_serial_baud"); - return -1; - } - Data = (Data & 0x8f) | clk_sel_val; - status = set_reg_sync(port, ATEN2011_port->SpRegOffset, Data); - if (status < 0) { - dbg("Writing spreg failed in set_serial_baud"); - return -1; - } - /* Calculate the Divisor */ - - if (status) { - err("%s - bad baud rate", __func__); - dbg("%s", "bad baud rate"); - return status; - } - /* Enable access to divisor latch */ - Data = ATEN2011_port->shadowLCR | SERIAL_LCR_DLAB; - ATEN2011_port->shadowLCR = Data; - set_uart_reg(port, LINE_CONTROL_REGISTER, Data); - - /* Write the divisor */ - Data = (unsigned char)(divisor & 0xff); - dbg("set_serial_baud Value to write DLL is %x", Data); - set_uart_reg(port, DIVISOR_LATCH_LSB, Data); - - Data = (unsigned char)((divisor & 0xff00) >> 8); - dbg("set_serial_baud Value to write DLM is %x", Data); - set_uart_reg(port, DIVISOR_LATCH_MSB, Data); - - /* Disable access to divisor latch */ - Data = ATEN2011_port->shadowLCR & ~SERIAL_LCR_DLAB; - ATEN2011_port->shadowLCR = Data; - set_uart_reg(port, LINE_CONTROL_REGISTER, Data); - - } - - return status; -} - -static void ATEN2011_change_port_settings(struct tty_struct *tty, - struct ATENINTL_port *ATEN2011_port, - struct ktermios *old_termios) -{ - int baud; - unsigned cflag; - unsigned iflag; - __u8 lData; - __u8 lParity; - __u8 lStop; - int status; - __u16 Data; - struct usb_serial_port *port; - struct usb_serial *serial; - - if (ATEN2011_port == NULL) - return; - - port = (struct usb_serial_port *)ATEN2011_port->port; - - serial = port->serial; - - dbg("%s - port %d", __func__, ATEN2011_port->port->number); - - if (!ATEN2011_port->open) { - dbg("%s - port not opened", __func__); - return; - } - - if ((!tty) || (!tty->termios)) { - dbg("%s - no tty structures", __func__); - return; - } - - dbg("%s", "Entering .......... "); - - lData = LCR_BITS_8; - lStop = LCR_STOP_1; - lParity = LCR_PAR_NONE; - - cflag = tty->termios->c_cflag; - iflag = tty->termios->c_iflag; - - /* Change the number of bits */ - - /* COMMENT1: the below Line"if(cflag & CSIZE)" is added for the errors we get for serial loop data test i.e serial_loopback.pl -v */ - /* if(cflag & CSIZE) */ - { - switch (cflag & CSIZE) { - case CS5: - lData = LCR_BITS_5; - break; - - case CS6: - lData = LCR_BITS_6; - break; - - case CS7: - lData = LCR_BITS_7; - break; - default: - case CS8: - lData = LCR_BITS_8; - break; - } - } - /* Change the Parity bit */ - if (cflag & PARENB) { - if (cflag & PARODD) { - lParity = LCR_PAR_ODD; - dbg("%s - parity = odd", __func__); - } else { - lParity = LCR_PAR_EVEN; - dbg("%s - parity = even", __func__); - } - - } else { - dbg("%s - parity = none", __func__); - } - - if (cflag & CMSPAR) - lParity = lParity | 0x20; - - /* Change the Stop bit */ - if (cflag & CSTOPB) { - lStop = LCR_STOP_2; - dbg("%s - stop bits = 2", __func__); - } else { - lStop = LCR_STOP_1; - dbg("%s - stop bits = 1", __func__); - } - - /* Update the LCR with the correct value */ - ATEN2011_port->shadowLCR &= - ~(LCR_BITS_MASK | LCR_STOP_MASK | LCR_PAR_MASK); - ATEN2011_port->shadowLCR |= (lData | lParity | lStop); - - dbg - ("ATEN2011_change_port_settings ATEN2011_port->shadowLCR is %x", - ATEN2011_port->shadowLCR); - /* Disable Interrupts */ - Data = 0x00; - set_uart_reg(port, INTERRUPT_ENABLE_REGISTER, Data); - - Data = 0x00; - set_uart_reg(port, FIFO_CONTROL_REGISTER, Data); - - Data = 0xcf; - set_uart_reg(port, FIFO_CONTROL_REGISTER, Data); - - /* Send the updated LCR value to the ATEN2011 */ - Data = ATEN2011_port->shadowLCR; - - set_uart_reg(port, LINE_CONTROL_REGISTER, Data); - - Data = 0x00b; - ATEN2011_port->shadowMCR = Data; - set_uart_reg(port, MODEM_CONTROL_REGISTER, Data); - Data = 0x00b; - set_uart_reg(port, MODEM_CONTROL_REGISTER, Data); - - /* set up the MCR register and send it to the ATEN2011 */ - - ATEN2011_port->shadowMCR = MCR_MASTER_IE; - if (cflag & CBAUD) - ATEN2011_port->shadowMCR |= (MCR_DTR | MCR_RTS); - - if (cflag & CRTSCTS) - ATEN2011_port->shadowMCR |= (MCR_XON_ANY); - else - ATEN2011_port->shadowMCR &= ~(MCR_XON_ANY); - - Data = ATEN2011_port->shadowMCR; - set_uart_reg(port, MODEM_CONTROL_REGISTER, Data); - - /* Determine divisor based on baud rate */ - baud = tty_get_baud_rate(tty); - - if (!baud) { - /* pick a default, any default... */ - dbg("%s", "Picked default baud..."); - baud = 9600; - } - - dbg("%s - baud rate = %d", __func__, baud); - status = ATEN2011_send_cmd_write_baud_rate(ATEN2011_port, baud); - - /* Enable Interrupts */ - Data = 0x0c; - set_uart_reg(port, INTERRUPT_ENABLE_REGISTER, Data); - - if (ATEN2011_port->read_urb->status != -EINPROGRESS) { - ATEN2011_port->read_urb->dev = serial->dev; - - status = usb_submit_urb(ATEN2011_port->read_urb, GFP_ATOMIC); - - if (status) { - dbg - (" usb_submit_urb(read bulk) failed, status = %d", - status); - } - } - dbg - ("ATEN2011_change_port_settings ATEN2011_port->shadowLCR is End %x", - ATEN2011_port->shadowLCR); - - return; -} - -static int ATEN2011_calc_num_ports(struct usb_serial *serial) -{ - - __u16 Data = 0x00; - int ret = 0; - int ATEN2011_2or4ports; - ret = usb_control_msg(serial->dev, usb_rcvctrlpipe(serial->dev, 0), - ATEN_RDREQ, ATEN_RD_RTYPE, 0, GPIO_REGISTER, - &Data, VENDOR_READ_LENGTH, ATEN_WDR_TIMEOUT); - -/* ghostgum: here is where the problem appears to bet */ -/* Which of the following are needed? */ -/* Greg used the serial->type->num_ports=2 */ -/* But the code in the ATEN2011_open relies on serial->num_ports=2 */ - if ((Data & 0x01) == 0) { - ATEN2011_2or4ports = 2; - serial->type->num_ports = 2; - serial->num_ports = 2; - } - /* else if(serial->interface->cur_altsetting->desc.bNumEndpoints == 9) */ - else { - ATEN2011_2or4ports = 4; - serial->type->num_ports = 4; - serial->num_ports = 4; - - } - - return ATEN2011_2or4ports; -} - -static int ATEN2011_startup(struct usb_serial *serial) -{ - struct ATENINTL_serial *ATEN2011_serial; - struct ATENINTL_port *ATEN2011_port; - struct usb_device *dev; - int i, status; - int minor; - - __u16 Data; - dbg("%s", " ATEN2011_startup :entering.........."); - - if (!serial) { - dbg("%s", "Invalid Handler"); - return -1; - } - - dev = serial->dev; - - dbg("%s", "Entering..."); - - /* create our private serial structure */ - ATEN2011_serial = kzalloc(sizeof(struct ATENINTL_serial), GFP_KERNEL); - if (ATEN2011_serial == NULL) { - err("%s - Out of memory", __func__); - return -ENOMEM; - } - - /* resetting the private structure field values to zero */ - memset(ATEN2011_serial, 0, sizeof(struct ATENINTL_serial)); - - ATEN2011_serial->serial = serial; - /* initilize status polling flag to 0 */ - ATEN2011_serial->status_polling_started = 0; - - usb_set_serial_data(serial, ATEN2011_serial); - ATEN2011_serial->ATEN2011_spectrum_2or4ports = - ATEN2011_calc_num_ports(serial); - /* we set up the pointers to the endpoints in the ATEN2011_open * - * function, as the structures aren't created yet. */ - - /* set up port private structures */ - for (i = 0; i < serial->num_ports; ++i) { - ATEN2011_port = - kmalloc(sizeof(struct ATENINTL_port), GFP_KERNEL); - if (ATEN2011_port == NULL) { - err("%s - Out of memory", __func__); - usb_set_serial_data(serial, NULL); - kfree(ATEN2011_serial); - return -ENOMEM; - } - memset(ATEN2011_port, 0, sizeof(struct ATENINTL_port)); - - /* - * Initialize all port interrupt end point to port 0 - * int endpoint. Our device has only one interrupt end point - * comman to all port - */ - /* serial->port[i]->interrupt_in_endpointAddress = serial->port[0]->interrupt_in_endpointAddress; */ - - ATEN2011_port->port = serial->port[i]; - usb_set_serial_port_data(serial->port[i], ATEN2011_port); - - minor = serial->port[i]->serial->minor; - if (minor == SERIAL_TTY_NO_MINOR) - minor = 0; - ATEN2011_port->port_num = - ((serial->port[i]->number - minor) + 1); - - if (ATEN2011_port->port_num == 1) { - ATEN2011_port->SpRegOffset = 0x0; - ATEN2011_port->ControlRegOffset = 0x1; - ATEN2011_port->DcrRegOffset = 0x4; - } else if ((ATEN2011_port->port_num == 2) - && (ATEN2011_serial->ATEN2011_spectrum_2or4ports == - 4)) { - ATEN2011_port->SpRegOffset = 0x8; - ATEN2011_port->ControlRegOffset = 0x9; - ATEN2011_port->DcrRegOffset = 0x16; - } else if ((ATEN2011_port->port_num == 2) - && (ATEN2011_serial->ATEN2011_spectrum_2or4ports == - 2)) { - ATEN2011_port->SpRegOffset = 0xa; - ATEN2011_port->ControlRegOffset = 0xb; - ATEN2011_port->DcrRegOffset = 0x19; - } else if ((ATEN2011_port->port_num == 3) - && (ATEN2011_serial->ATEN2011_spectrum_2or4ports == - 4)) { - ATEN2011_port->SpRegOffset = 0xa; - ATEN2011_port->ControlRegOffset = 0xb; - ATEN2011_port->DcrRegOffset = 0x19; - } else if ((ATEN2011_port->port_num == 4) - && (ATEN2011_serial->ATEN2011_spectrum_2or4ports == - 4)) { - ATEN2011_port->SpRegOffset = 0xc; - ATEN2011_port->ControlRegOffset = 0xd; - ATEN2011_port->DcrRegOffset = 0x1c; - } - - usb_set_serial_port_data(serial->port[i], ATEN2011_port); - - /* enable rx_disable bit in control register */ - - status = get_reg_sync(serial->port[i], - ATEN2011_port->ControlRegOffset, &Data); - if (status < 0) { - dbg("Reading ControlReg failed status-0x%x", - status); - break; - } else - dbg - ("ControlReg Reading success val is %x, status%d", - Data, status); - Data |= 0x08; /* setting driver done bit */ - Data |= 0x04; /* sp1_bit to have cts change reflect in modem status reg */ - - /* Data |= 0x20; */ /* rx_disable bit */ - status = set_reg_sync(serial->port[i], - ATEN2011_port->ControlRegOffset, Data); - if (status < 0) { - dbg - ("Writing ControlReg failed(rx_disable) status-0x%x", - status); - break; - } else - dbg - ("ControlReg Writing success(rx_disable) status%d", - status); - - /* - * Write default values in DCR (i.e 0x01 in DCR0, 0x05 in DCR2 - * and 0x24 in DCR3 - */ - Data = 0x01; - status = set_reg_sync(serial->port[i], - (__u16)(ATEN2011_port->DcrRegOffset + 0), - Data); - if (status < 0) { - dbg("Writing DCR0 failed status-0x%x", status); - break; - } else - dbg("DCR0 Writing success status%d", status); - - Data = 0x05; - status = set_reg_sync(serial->port[i], - (__u16)(ATEN2011_port->DcrRegOffset + 1), - Data); - if (status < 0) { - dbg("Writing DCR1 failed status-0x%x", status); - break; - } else - dbg("DCR1 Writing success status%d", status); - - Data = 0x24; - status = set_reg_sync(serial->port[i], - (__u16)(ATEN2011_port->DcrRegOffset + 2), - Data); - if (status < 0) { - dbg("Writing DCR2 failed status-0x%x", status); - break; - } else - dbg("DCR2 Writing success status%d", status); - - /* write values in clkstart0x0 and clkmulti 0x20 */ - Data = 0x0; - status = set_reg_sync(serial->port[i], CLK_START_VALUE_REGISTER, - Data); - if (status < 0) { - dbg - ("Writing CLK_START_VALUE_REGISTER failed status-0x%x", - status); - break; - } else - dbg - ("CLK_START_VALUE_REGISTER Writing success status%d", - status); - - Data = 0x20; - status = set_reg_sync(serial->port[i], CLK_MULTI_REGISTER, - Data); - if (status < 0) { - dbg - ("Writing CLK_MULTI_REGISTER failed status-0x%x", - status); - break; - } else - dbg("CLK_MULTI_REGISTER Writing success status%d", - status); - - /* Zero Length flag register */ - if ((ATEN2011_port->port_num != 1) - && (ATEN2011_serial->ATEN2011_spectrum_2or4ports == 2)) { - - Data = 0xff; - status = set_reg_sync(serial->port[i], - (__u16)(ZLP_REG1 + ((__u16)ATEN2011_port->port_num)), - Data); - dbg("ZLIP offset%x", - (__u16) (ZLP_REG1 + - ((__u16) ATEN2011_port->port_num))); - if (status < 0) { - dbg - ("Writing ZLP_REG%d failed status-0x%x", - i + 2, status); - break; - } else - dbg("ZLP_REG%d Writing success status%d", - i + 2, status); - } else { - Data = 0xff; - status = set_reg_sync(serial->port[i], - (__u16)(ZLP_REG1 + ((__u16)ATEN2011_port->port_num) - 0x1), - Data); - dbg("ZLIP offset%x", - (__u16) (ZLP_REG1 + - ((__u16) ATEN2011_port->port_num) - - 0x1)); - if (status < 0) { - dbg - ("Writing ZLP_REG%d failed status-0x%x", - i + 1, status); - break; - } else - dbg("ZLP_REG%d Writing success status%d", - i + 1, status); - - } - ATEN2011_port->control_urb = usb_alloc_urb(0, GFP_ATOMIC); - ATEN2011_port->ctrl_buf = kmalloc(16, GFP_KERNEL); - - } - - /* Zero Length flag enable */ - Data = 0x0f; - status = set_reg_sync(serial->port[0], ZLP_REG5, Data); - if (status < 0) { - dbg("Writing ZLP_REG5 failed status-0x%x", status); - return -1; - } else - dbg("ZLP_REG5 Writing success status%d", status); - - /* setting configuration feature to one */ - usb_control_msg(serial->dev, usb_sndctrlpipe(serial->dev, 0), - (__u8) 0x03, 0x00, 0x01, 0x00, NULL, 0x00, 5 * HZ); - return 0; -} - -static void ATEN2011_release(struct usb_serial *serial) -{ - int i; - struct ATENINTL_port *ATEN2011_port; - - /* check for the ports to be closed,close the ports and disconnect */ - - /* free private structure allocated for serial port * - * stop reads and writes on all ports */ - - for (i = 0; i < serial->num_ports; ++i) { - ATEN2011_port = usb_get_serial_port_data(serial->port[i]); - kfree(ATEN2011_port->ctrl_buf); - usb_kill_urb(ATEN2011_port->control_urb); - kfree(ATEN2011_port); - usb_set_serial_port_data(serial->port[i], NULL); - } - - /* free private structure allocated for serial device */ - - kfree(usb_get_serial_data(serial)); - usb_set_serial_data(serial, NULL); -} - -static struct usb_serial_driver aten_serial_driver = { - .driver = { - .owner = THIS_MODULE, - .name = "aten2011", - }, - .description = DRIVER_DESC, - .id_table = id_table, - .open = ATEN2011_open, - .close = ATEN2011_close, - .write = ATEN2011_write, - .write_room = ATEN2011_write_room, - .chars_in_buffer = ATEN2011_chars_in_buffer, - .throttle = ATEN2011_throttle, - .unthrottle = ATEN2011_unthrottle, - .calc_num_ports = ATEN2011_calc_num_ports, - - .ioctl = ATEN2011_ioctl, - .set_termios = ATEN2011_set_termios, - .break_ctl = ATEN2011_break, - .tiocmget = ATEN2011_tiocmget, - .tiocmset = ATEN2011_tiocmset, - .attach = ATEN2011_startup, - .release = ATEN2011_release, - .read_bulk_callback = ATEN2011_bulk_in_callback, - .read_int_callback = ATEN2011_interrupt_callback, -}; - -static struct usb_driver aten_driver = { - .name = "aten2011", - .probe = usb_serial_probe, - .disconnect = usb_serial_disconnect, - .id_table = id_table, -}; - -static int __init aten_init(void) -{ - int retval; - - /* Register with the usb serial */ - retval = usb_serial_register(&aten_serial_driver); - if (retval) - return retval; - - printk(KERN_INFO KBUILD_MODNAME ":" - DRIVER_DESC " " DRIVER_VERSION "\n"); - - /* Register with the usb */ - retval = usb_register(&aten_driver); - if (retval) - usb_serial_deregister(&aten_serial_driver); - - return retval; -} - -static void __exit aten_exit(void) -{ - usb_deregister(&aten_driver); - usb_serial_deregister(&aten_serial_driver); -} - -module_init(aten_init); -module_exit(aten_exit); - -/* Module information */ -MODULE_DESCRIPTION(DRIVER_DESC); -MODULE_LICENSE("GPL"); - -MODULE_PARM_DESC(debug, "Debug enabled or not"); -- cgit v1.2.3 From fb29900217bd89370974870d47cab07bad3e5ac4 Mon Sep 17 00:00:00 2001 From: Amit Kucheria Date: Mon, 27 Jul 2009 12:01:03 +0300 Subject: staging: udlfb: Add vmalloc.h include Required for vmalloc_32 and vfree declarations on non-x86 platforms. Signed-off-by: Amit Kucheria Signed-off-by: Greg Kroah-Hartman --- drivers/staging/udlfb/udlfb.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/staging/udlfb/udlfb.c b/drivers/staging/udlfb/udlfb.c index 0ab9d15f343..f5416af1e90 100644 --- a/drivers/staging/udlfb/udlfb.c +++ b/drivers/staging/udlfb/udlfb.c @@ -21,6 +21,7 @@ #include #include #include +#include #include "udlfb.h" -- cgit v1.2.3 From 6352a29305373ae6196491e6d4669f301e26492e Mon Sep 17 00:00:00 2001 From: Tyler Hicks Date: Tue, 28 Jul 2009 13:57:01 -0500 Subject: eCryptfs: Check Tag 11 literal data buffer size Tag 11 packets are stored in the metadata section of an eCryptfs file to store the key signature(s) used to encrypt the file encryption key. After extracting the packet length field to determine the key signature length, a check is not performed to see if the length would exceed the key signature buffer size that was passed into parse_tag_11_packet(). Thanks to Ramon de Carvalho Valle for finding this bug using fsfuzzer. Signed-off-by: Tyler Hicks Cc: stable@kernel.org (2.6.27 and 30) Signed-off-by: Linus Torvalds --- fs/ecryptfs/keystore.c | 6 ++++++ 1 file changed, 6 insertions(+) diff --git a/fs/ecryptfs/keystore.c b/fs/ecryptfs/keystore.c index af737bb56cb..5414253d4c9 100644 --- a/fs/ecryptfs/keystore.c +++ b/fs/ecryptfs/keystore.c @@ -1449,6 +1449,12 @@ parse_tag_11_packet(unsigned char *data, unsigned char *contents, rc = -EINVAL; goto out; } + if (unlikely((*tag_11_contents_size) > max_contents_bytes)) { + printk(KERN_ERR "Literal data section in tag 11 packet exceeds " + "expected size\n"); + rc = -EINVAL; + goto out; + } if (data[(*packet_size)++] != 0x62) { printk(KERN_WARNING "Unrecognizable packet\n"); rc = -EINVAL; -- cgit v1.2.3 From f151cd2c54ddc7714e2f740681350476cda03a28 Mon Sep 17 00:00:00 2001 From: Ramon de Carvalho Valle Date: Tue, 28 Jul 2009 13:58:22 -0500 Subject: eCryptfs: parse_tag_3_packet check tag 3 packet encrypted key size The parse_tag_3_packet function does not check if the tag 3 packet contains a encrypted key size larger than ECRYPTFS_MAX_ENCRYPTED_KEY_BYTES. Signed-off-by: Ramon de Carvalho Valle [tyhicks@linux.vnet.ibm.com: Added printk newline and changed goto to out_free] Signed-off-by: Tyler Hicks Cc: stable@kernel.org (2.6.27 and 30) Signed-off-by: Linus Torvalds --- fs/ecryptfs/keystore.c | 7 +++++++ 1 file changed, 7 insertions(+) diff --git a/fs/ecryptfs/keystore.c b/fs/ecryptfs/keystore.c index 5414253d4c9..259525c9abb 100644 --- a/fs/ecryptfs/keystore.c +++ b/fs/ecryptfs/keystore.c @@ -1303,6 +1303,13 @@ parse_tag_3_packet(struct ecryptfs_crypt_stat *crypt_stat, } (*new_auth_tok)->session_key.encrypted_key_size = (body_size - (ECRYPTFS_SALT_SIZE + 5)); + if ((*new_auth_tok)->session_key.encrypted_key_size + > ECRYPTFS_MAX_ENCRYPTED_KEY_BYTES) { + printk(KERN_WARNING "Tag 3 packet contains key larger " + "than ECRYPTFS_MAX_ENCRYPTED_KEY_BYTES\n"); + rc = -EINVAL; + goto out_free; + } if (unlikely(data[(*packet_size)++] != 0x04)) { printk(KERN_WARNING "Unknown version number [%d]\n", data[(*packet_size) - 1]); -- cgit v1.2.3 From ce4adcc6e5320062e0d993eb75152d165aaabbe6 Mon Sep 17 00:00:00 2001 From: Andreas Eversberg Date: Mon, 27 Jul 2009 19:24:04 +0200 Subject: mISDN: Fix handling of receive buffer size in L1oIP The size of receive buffer pointer was used to get size of receive buffer instead of recvbuf_size itself, so only 4/8 bytes could be transfered. This is a regression to 2.6.30 introduced by commit 8c90e11e3543d7de612194a042a148caeaab5f1d ("mISDN: Use kernel_{send,recv}msg instead of open coding") Signed-off-by: Andreas Eversberg Signed-off-by: Karsten Keil Signed-off-by: Linus Torvalds --- drivers/isdn/mISDN/l1oip_core.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/isdn/mISDN/l1oip_core.c b/drivers/isdn/mISDN/l1oip_core.c index 990e6a7e667..c3b661a666c 100644 --- a/drivers/isdn/mISDN/l1oip_core.c +++ b/drivers/isdn/mISDN/l1oip_core.c @@ -731,10 +731,10 @@ l1oip_socket_thread(void *data) while (!signal_pending(current)) { struct kvec iov = { .iov_base = recvbuf, - .iov_len = sizeof(recvbuf), + .iov_len = recvbuf_size, }; recvlen = kernel_recvmsg(socket, &msg, &iov, 1, - sizeof(recvbuf), 0); + recvbuf_size, 0); if (recvlen > 0) { l1oip_socket_parse(hc, &sin_rx, recvbuf, recvlen); } else { -- cgit v1.2.3 From f99aa3f9b67ca8c29dc29ef3fc453f0343206c46 Mon Sep 17 00:00:00 2001 From: "Carlos R. Mafra" Date: Mon, 13 Jul 2009 21:45:03 +0200 Subject: USB: option: Remove unused variable After commit f092c240494f2d807401d93f95f683909b90af96 ("USB: option: remove unnecessary and erroneous code") the variable 'serial' becomes unused, as gcc-4.3.2 points out: drivers/usb/serial/option.c: In function 'option_instat_callback': drivers/usb/serial/option.c:834: warning: unused variable 'serial' drivers/usb/serial/option.c: In function 'option_open': drivers/usb/serial/option.c:930: warning: unused variable 'serial' So I removed it. Signed-off-by: Carlos R. Mafra Signed-off-by: Greg Kroah-Hartman --- drivers/usb/serial/option.c | 2 -- 1 file changed, 2 deletions(-) diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c index 98262dd552b..77b9563ec43 100644 --- a/drivers/usb/serial/option.c +++ b/drivers/usb/serial/option.c @@ -831,7 +831,6 @@ static void option_instat_callback(struct urb *urb) int status = urb->status; struct usb_serial_port *port = urb->context; struct option_port_private *portdata = usb_get_serial_port_data(port); - struct usb_serial *serial = port->serial; dbg("%s", __func__); dbg("%s: urb %p port %p has data %p", __func__, urb, port, portdata); @@ -927,7 +926,6 @@ static int option_open(struct tty_struct *tty, struct usb_serial_port *port, struct file *filp) { struct option_port_private *portdata; - struct usb_serial *serial = port->serial; int i, err; struct urb *urb; -- cgit v1.2.3 From 5f4fab91f2b12c12f0506b4da49ed199db8c64ed Mon Sep 17 00:00:00 2001 From: Oliver Neukum Date: Mon, 13 Jul 2009 23:24:10 +0200 Subject: USB: let the option driver compile without CONFIG_PM This is needed for compilation without CONFIG_PM. Signed-off-by: Oliver Neukum Acked-by: Randy Dunlap Signed-off-by: Greg Kroah-Hartman --- drivers/usb/serial/option.c | 8 ++++++++ 1 file changed, 8 insertions(+) diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c index 77b9563ec43..7638d2632ff 100644 --- a/drivers/usb/serial/option.c +++ b/drivers/usb/serial/option.c @@ -66,8 +66,10 @@ static int option_tiocmget(struct tty_struct *tty, struct file *file); static int option_tiocmset(struct tty_struct *tty, struct file *file, unsigned int set, unsigned int clear); static int option_send_setup(struct usb_serial_port *port); +#ifdef CONFIG_PM static int option_suspend(struct usb_serial *serial, pm_message_t message); static int option_resume(struct usb_serial *serial); +#endif /* Vendor and product IDs */ #define OPTION_VENDOR_ID 0x0AF0 @@ -555,8 +557,10 @@ static struct usb_driver option_driver = { .name = "option", .probe = usb_serial_probe, .disconnect = usb_serial_disconnect, +#ifdef CONFIG_PM .suspend = usb_serial_suspend, .resume = usb_serial_resume, +#endif .id_table = option_ids, .no_dynamic_id = 1, }; @@ -588,8 +592,10 @@ static struct usb_serial_driver option_1port_device = { .disconnect = option_disconnect, .release = option_release, .read_int_callback = option_instat_callback, +#ifdef CONFIG_PM .suspend = option_suspend, .resume = option_resume, +#endif }; static int debug; @@ -1185,6 +1191,7 @@ static void option_release(struct usb_serial *serial) } } +#ifdef CONFIG_PM static int option_suspend(struct usb_serial *serial, pm_message_t message) { dbg("%s entered", __func__); @@ -1243,6 +1250,7 @@ static int option_resume(struct usb_serial *serial) } return 0; } +#endif MODULE_AUTHOR(DRIVER_AUTHOR); MODULE_DESCRIPTION(DRIVER_DESC); -- cgit v1.2.3 From 7a777919bbeec3eac1d7904a728a60e9c2bb9c67 Mon Sep 17 00:00:00 2001 From: Giacomo Lozito Date: Mon, 13 Jul 2009 23:23:33 +0200 Subject: USB: storage: raise timeout in usb_stor_Bulk_max_lun Requests to get max LUN, for certain USB storage devices, require a longer timeout before a correct reply is returned. This happens for a Realtek USB Card Reader (0bda:0152), which has a max LUN of 3 but is set to 0, thus losing functionality, because of the timeout occurring too quickly. Raising the timeout value fixes the issue and might help other devices to return a correct max LUN value as well. Signed-off-by: Giacomo Lozito Acked-by: Alan Stern Cc: stable Signed-off-by: Greg Kroah-Hartman --- drivers/usb/storage/transport.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/usb/storage/transport.c b/drivers/usb/storage/transport.c index fcb32021721..e20dc525d17 100644 --- a/drivers/usb/storage/transport.c +++ b/drivers/usb/storage/transport.c @@ -961,7 +961,7 @@ int usb_stor_Bulk_max_lun(struct us_data *us) US_BULK_GET_MAX_LUN, USB_DIR_IN | USB_TYPE_CLASS | USB_RECIP_INTERFACE, - 0, us->ifnum, us->iobuf, 1, HZ); + 0, us->ifnum, us->iobuf, 1, 10*HZ); US_DEBUGP("GetMaxLUN command result is %d, data is %d\n", result, us->iobuf[0]); -- cgit v1.2.3 From 715bfc22ce952a14fac0b9200fd70d81c1951091 Mon Sep 17 00:00:00 2001 From: Anand Gadiyar Date: Tue, 14 Jul 2009 16:41:00 +0530 Subject: USB: OMAP: OHCI: hc_driver's stop method should call ohci_stop OMAP: OHCI: hc_driver's stop method should call ohci_stop Without this, the ohci-omap driver will not cleanup the debugfs nodes when the driver is unloaded. So the next insmod will fail, if CONFIG_DEBUG_FS and CONFIG_USB_DEBUG are both selected. Reported-by: vikram pandita Cc: David Brownell Signed-off-by: Anand Gadiyar Signed-off-by: Greg Kroah-Hartman --- drivers/usb/host/ohci-omap.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/usb/host/ohci-omap.c b/drivers/usb/host/ohci-omap.c index f3aaba35e91..83cbecd2a1e 100644 --- a/drivers/usb/host/ohci-omap.c +++ b/drivers/usb/host/ohci-omap.c @@ -282,6 +282,7 @@ static int ohci_omap_init(struct usb_hcd *hcd) static void ohci_omap_stop(struct usb_hcd *hcd) { dev_dbg(hcd->self.controller, "stopping USB Controller\n"); + ohci_stop(hcd); omap_ohci_clock_power(0); } -- cgit v1.2.3 From fca4404c55ab44c7413769f1d9c66451103711a5 Mon Sep 17 00:00:00 2001 From: Ville Sundberg Date: Wed, 15 Jul 2009 00:27:28 +0300 Subject: USB: ftdi_sio: Add support for GN Otometrics Aurical USB Audiometer The patch adds support for the GN Otometrics Aurical USB Audiometer (FT232BM-based). A new VID and a new PID is added. Signed-off-by: Ville Sundberg Signed-off-by: Greg Kroah-Hartman --- drivers/usb/serial/ftdi_sio.c | 1 + drivers/usb/serial/ftdi_sio.h | 7 +++++++ 2 files changed, 8 insertions(+) diff --git a/drivers/usb/serial/ftdi_sio.c b/drivers/usb/serial/ftdi_sio.c index 60c64cc5be2..b574878c78b 100644 --- a/drivers/usb/serial/ftdi_sio.c +++ b/drivers/usb/serial/ftdi_sio.c @@ -698,6 +698,7 @@ static struct usb_device_id id_table_combined [] = { { USB_DEVICE(MARVELL_VID, MARVELL_SHEEVAPLUG_PID), .driver_info = (kernel_ulong_t)&ftdi_jtag_quirk }, { USB_DEVICE(LARSENBRUSGAARD_VID, LB_ALTITRACK_PID) }, + { USB_DEVICE(GN_OTOMETRICS_VID, AURICAL_USB_PID) }, { }, /* Optional parameter entry */ { } /* Terminating entry */ }; diff --git a/drivers/usb/serial/ftdi_sio.h b/drivers/usb/serial/ftdi_sio.h index c9fbd741509..24dbd99e87d 100644 --- a/drivers/usb/serial/ftdi_sio.h +++ b/drivers/usb/serial/ftdi_sio.h @@ -946,6 +946,13 @@ #define FTDI_TURTELIZER_PID 0xBDC8 /* JTAG/RS-232 adapter by egnite GmBH */ +/* + * GN Otometrics (http://www.otometrics.com) + * Submitted by Ville Sundberg. + */ +#define GN_OTOMETRICS_VID 0x0c33 /* Vendor ID */ +#define AURICAL_USB_PID 0x0010 /* Aurical USB Audiometer */ + /* * BmRequestType: 1100 0000b * bRequest: FTDI_E2_READ -- cgit v1.2.3 From 8bf16ba7c8ea9d067914e270764c14020a26232f Mon Sep 17 00:00:00 2001 From: Craig Shelley Date: Sun, 12 Jul 2009 21:52:33 +0100 Subject: USB: CP210x Add new device IDs Signed-off-by: Craig Shelley Signed-off-by: Greg Kroah-Hartman --- drivers/usb/serial/cp210x.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/drivers/usb/serial/cp210x.c b/drivers/usb/serial/cp210x.c index e9a40b820fd..985cbcf48bd 100644 --- a/drivers/usb/serial/cp210x.c +++ b/drivers/usb/serial/cp210x.c @@ -80,6 +80,7 @@ static struct usb_device_id id_table [] = { { USB_DEVICE(0x10C4, 0x80F6) }, /* Suunto sports instrument */ { USB_DEVICE(0x10C4, 0x8115) }, /* Arygon NFC/Mifare Reader */ { USB_DEVICE(0x10C4, 0x813D) }, /* Burnside Telecom Deskmobile */ + { USB_DEVICE(0x10C4, 0x813F) }, /* Tams Master Easy Control */ { USB_DEVICE(0x10C4, 0x814A) }, /* West Mountain Radio RIGblaster P&P */ { USB_DEVICE(0x10C4, 0x814B) }, /* West Mountain Radio RIGtalk */ { USB_DEVICE(0x10C4, 0x815E) }, /* Helicomm IP-Link 1220-DVM */ @@ -96,7 +97,9 @@ static struct usb_device_id id_table [] = { { USB_DEVICE(0x10c4, 0x8293) }, /* Telegesys ETRX2USB */ { USB_DEVICE(0x10C4, 0x82F9) }, /* Procyon AVS */ { USB_DEVICE(0x10C4, 0x8341) }, /* Siemens MC35PU GPRS Modem */ + { USB_DEVICE(0x10C4, 0x8382) }, /* Cygnal Integrated Products, Inc. */ { USB_DEVICE(0x10C4, 0x83A8) }, /* Amber Wireless AMB2560 */ + { USB_DEVICE(0x10C4, 0x8411) }, /* Kyocera GPS Module */ { USB_DEVICE(0x10C4, 0x846E) }, /* BEI USB Sensor Interface (VCP) */ { USB_DEVICE(0x10C4, 0xEA60) }, /* Silicon Labs factory default */ { USB_DEVICE(0x10C4, 0xEA61) }, /* Silicon Labs factory default */ -- cgit v1.2.3 From bcfa4e68d8d0ea617bde4203b2b3848f5a49a423 Mon Sep 17 00:00:00 2001 From: Simon Kagstrom Date: Mon, 13 Jul 2009 08:25:09 +0200 Subject: USB: ehci-orion: Call ehci_reset before ehci_halt I noticed that USB initialization didn't setup correctly on my kirkwood based board (OpenRD base) if I hadn't initialized USB in U-boot first. The error message looks like this: ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver orion-ehci orion-ehci.0: Marvell Orion EHCI orion-ehci orion-ehci.0: new USB bus registered, assigned bus number 1 orion-ehci orion-ehci.0: can't setup orion-ehci orion-ehci.0: USB bus 1 deregistered orion-ehci orion-ehci.0: init orion-ehci.0 fail, -110 orion-ehci: probe of orion-ehci.0 failed with error -110 which is caused by ehci_halt() timing out in the handshake() call. I noticed that U-boot does a reset before calling handshake(), so this patch does the same thing for Linux. USB now works for me. Signed-off-by: Simon Kagstrom Acked-by: Nicolas Pitre Signed-off-by: Greg Kroah-Hartman --- drivers/usb/host/ehci-orion.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/usb/host/ehci-orion.c b/drivers/usb/host/ehci-orion.c index dc2ac613a9d..1d283e1b2b8 100644 --- a/drivers/usb/host/ehci-orion.c +++ b/drivers/usb/host/ehci-orion.c @@ -105,6 +105,7 @@ static int ehci_orion_setup(struct usb_hcd *hcd) struct ehci_hcd *ehci = hcd_to_ehci(hcd); int retval; + ehci_reset(ehci); retval = ehci_halt(ehci); if (retval) return retval; @@ -118,7 +119,6 @@ static int ehci_orion_setup(struct usb_hcd *hcd) hcd->has_tt = 1; - ehci_reset(ehci); ehci_port_power(ehci, 0); return retval; -- cgit v1.2.3 From c420befde6b2747ebc2b8f015687a5dbd6e167ca Mon Sep 17 00:00:00 2001 From: Herton Ronaldo Krzesinski Date: Wed, 15 Jul 2009 17:10:26 -0300 Subject: USB: option: add ZTE device ids and remove ONDA ids Current listed Onda ids are ZTE devices. Replace them with ZTE id define and add more ZTE device ids. Also remove 19d2:2000, this is the id when device is first plugged in and is a CD-only device, before the switch using eject. These changes are based on a previous patch by Ming Zhao Signed-off-by: Herton Ronaldo Krzesinski Cc: Ming Zhao Signed-off-by: Greg Kroah-Hartman --- drivers/usb/serial/option.c | 113 ++++++++++++++++++++++++++------------------ 1 file changed, 68 insertions(+), 45 deletions(-) diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c index 7638d2632ff..5640f38fdb3 100644 --- a/drivers/usb/serial/option.c +++ b/drivers/usb/serial/option.c @@ -261,11 +261,6 @@ static int option_resume(struct usb_serial *serial); #define AXESSTEL_VENDOR_ID 0x1726 #define AXESSTEL_PRODUCT_MV110H 0x1000 -#define ONDA_VENDOR_ID 0x19d2 -#define ONDA_PRODUCT_MSA501HS 0x0001 -#define ONDA_PRODUCT_ET502HS 0x0002 -#define ONDA_PRODUCT_MT503HS 0x2000 - #define BANDRICH_VENDOR_ID 0x1A8D #define BANDRICH_PRODUCT_C100_1 0x1002 #define BANDRICH_PRODUCT_C100_2 0x1003 @@ -476,42 +471,6 @@ static struct usb_device_id option_ids[] = { { USB_DEVICE(ANYDATA_VENDOR_ID, ANYDATA_PRODUCT_ADU_500A) }, { USB_DEVICE(ANYDATA_VENDOR_ID, ANYDATA_PRODUCT_ADU_620UW) }, { USB_DEVICE(AXESSTEL_VENDOR_ID, AXESSTEL_PRODUCT_MV110H) }, - { USB_DEVICE(ONDA_VENDOR_ID, ONDA_PRODUCT_MSA501HS) }, - { USB_DEVICE(ONDA_VENDOR_ID, ONDA_PRODUCT_ET502HS) }, - { USB_DEVICE(ONDA_VENDOR_ID, 0x0003) }, - { USB_DEVICE(ONDA_VENDOR_ID, 0x0004) }, - { USB_DEVICE(ONDA_VENDOR_ID, 0x0005) }, - { USB_DEVICE(ONDA_VENDOR_ID, 0x0006) }, - { USB_DEVICE(ONDA_VENDOR_ID, 0x0007) }, - { USB_DEVICE(ONDA_VENDOR_ID, 0x0008) }, - { USB_DEVICE(ONDA_VENDOR_ID, 0x0009) }, - { USB_DEVICE(ONDA_VENDOR_ID, 0x000a) }, - { USB_DEVICE(ONDA_VENDOR_ID, 0x000b) }, - { USB_DEVICE(ONDA_VENDOR_ID, 0x000c) }, - { USB_DEVICE(ONDA_VENDOR_ID, 0x000d) }, - { USB_DEVICE(ONDA_VENDOR_ID, 0x000e) }, - { USB_DEVICE(ONDA_VENDOR_ID, 0x000f) }, - { USB_DEVICE(ONDA_VENDOR_ID, 0x0010) }, - { USB_DEVICE(ONDA_VENDOR_ID, 0x0011) }, - { USB_DEVICE(ONDA_VENDOR_ID, 0x0012) }, - { USB_DEVICE(ONDA_VENDOR_ID, 0x0013) }, - { USB_DEVICE(ONDA_VENDOR_ID, 0x0014) }, - { USB_DEVICE(ONDA_VENDOR_ID, 0x0015) }, - { USB_DEVICE(ONDA_VENDOR_ID, 0x0016) }, - { USB_DEVICE(ONDA_VENDOR_ID, 0x0017) }, - { USB_DEVICE(ONDA_VENDOR_ID, 0x0018) }, - { USB_DEVICE(ONDA_VENDOR_ID, 0x0019) }, - { USB_DEVICE(ONDA_VENDOR_ID, 0x0020) }, - { USB_DEVICE(ONDA_VENDOR_ID, 0x0021) }, - { USB_DEVICE(ONDA_VENDOR_ID, 0x0022) }, - { USB_DEVICE(ONDA_VENDOR_ID, 0x0023) }, - { USB_DEVICE(ONDA_VENDOR_ID, 0x0024) }, - { USB_DEVICE(ONDA_VENDOR_ID, 0x0025) }, - { USB_DEVICE(ONDA_VENDOR_ID, 0x0026) }, - { USB_DEVICE(ONDA_VENDOR_ID, 0x0027) }, - { USB_DEVICE(ONDA_VENDOR_ID, 0x0028) }, - { USB_DEVICE(ONDA_VENDOR_ID, 0x0029) }, - { USB_DEVICE(ONDA_VENDOR_ID, ONDA_PRODUCT_MT503HS) }, { USB_DEVICE(YISO_VENDOR_ID, YISO_PRODUCT_U893) }, { USB_DEVICE(BANDRICH_VENDOR_ID, BANDRICH_PRODUCT_C100_1) }, { USB_DEVICE(BANDRICH_VENDOR_ID, BANDRICH_PRODUCT_C100_2) }, @@ -536,10 +495,74 @@ static struct usb_device_id option_ids[] = { { USB_DEVICE(QUALCOMM_VENDOR_ID, 0x6613)}, /* Onda H600/ZTE MF330 */ { USB_DEVICE(MAXON_VENDOR_ID, 0x6280) }, /* BP3-USB & BP3-EXT HSDPA */ { USB_DEVICE(TELIT_VENDOR_ID, TELIT_PRODUCT_UC864E) }, - { USB_DEVICE(ZTE_VENDOR_ID, ZTE_PRODUCT_MF622) }, - { USB_DEVICE(ZTE_VENDOR_ID, ZTE_PRODUCT_MF626) }, - { USB_DEVICE(ZTE_VENDOR_ID, ZTE_PRODUCT_MF628) }, - { USB_DEVICE(ZTE_VENDOR_ID, ZTE_PRODUCT_CDMA_TECH) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, ZTE_PRODUCT_MF622, 0xff, 0xff, 0xff) }, /* ZTE WCDMA products */ + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0002, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0003, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0004, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0005, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0006, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0007, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0008, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0009, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x000a, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x000b, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x000c, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x000d, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x000e, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x000f, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0010, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0011, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0012, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0013, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, ZTE_PRODUCT_MF628, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0016, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0017, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0018, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0019, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0020, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0021, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0022, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0023, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0024, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0025, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0026, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0028, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0029, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0030, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, ZTE_PRODUCT_MF626, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0032, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0033, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0037, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0039, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0042, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0043, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0048, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0049, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0051, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0052, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0054, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0055, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0057, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0058, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0061, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0062, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0063, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0064, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0066, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0069, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0076, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0078, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0082, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0086, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x2002, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x2003, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0014, 0xff, 0xff, 0xff) }, /* ZTE CDMA products */ + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0027, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0059, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0060, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0070, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0073, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, ZTE_PRODUCT_CDMA_TECH, 0xff, 0xff, 0xff) }, { USB_DEVICE(BENQ_VENDOR_ID, BENQ_PRODUCT_H10) }, { USB_DEVICE(DLINK_VENDOR_ID, DLINK_PRODUCT_DWM_652) }, { USB_DEVICE(QISDA_VENDOR_ID, QISDA_PRODUCT_H21_4512) }, -- cgit v1.2.3 From f1469fc3ef1d5a8a67146c1c72021f012a59dea6 Mon Sep 17 00:00:00 2001 From: Tim Gardner Date: Fri, 17 Jul 2009 07:55:36 -0600 Subject: USB: option: Add USB ID for Novatel MC727/U727/USB727 refresh BugLink: https://bugs.launchpad.net/bugs/365291 Signed-off-by: Tim Gardner Signed-off-by: Greg Kroah-Hartman --- drivers/usb/serial/option.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c index 5640f38fdb3..ff61f89918e 100644 --- a/drivers/usb/serial/option.c +++ b/drivers/usb/serial/option.c @@ -207,6 +207,7 @@ static int option_resume(struct usb_serial *serial); #define NOVATELWIRELESS_PRODUCT_MC727 0x4100 #define NOVATELWIRELESS_PRODUCT_MC950D 0x4400 #define NOVATELWIRELESS_PRODUCT_U727 0x5010 +#define NOVATELWIRELESS_PRODUCT_MC727_NEW 0x5100 #define NOVATELWIRELESS_PRODUCT_MC760 0x6000 #define NOVATELWIRELESS_PRODUCT_OVMC760 0x6002 @@ -435,6 +436,7 @@ static struct usb_device_id option_ids[] = { { USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_EU870D) }, /* Novatel EU850D/EU860D/EU870D */ { USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_MC950D) }, /* Novatel MC930D/MC950D */ { USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_MC727) }, /* Novatel MC727/U727/USB727 */ + { USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_MC727_NEW) }, /* Novatel MC727/U727/USB727 refresh */ { USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_U727) }, /* Novatel MC727/U727/USB727 */ { USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_MC760) }, /* Novatel MC760/U760/USB760 */ { USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_OVMC760) }, /* Novatel Ovation MC760 */ -- cgit v1.2.3 From 9d498beafc0a66ce333f0d9067af0aa5dedd4c8e Mon Sep 17 00:00:00 2001 From: Russell Lang Date: Fri, 17 Jul 2009 19:29:20 +1000 Subject: USB: aten uc2324 is really a moschip 7840 I've opened up the case, and the chips in the ATEN UC2324 are: Moschip MCS7840CV-AA 69507-6B1 0650 (USB to 4-port serial) (logo with AF kerned together) 0748 24BC02 SINGLP (unknown 8-pin chip) (logo looks like 3 or Z in circle) ZT3243LEEA 0752 B7A16420.T (4 chips, so this will be RS232 line driver) (Probably equivalent of Sipex SP3243) So the ATEN 2324 (aten2011.c driver), is definitely the Moschip 7840, and should use the mos7840.c driver. I expect you will remove the aten2011.c driver from the staging area. From the aten2011.c source code, the device ID for the UC2322 (2 port serial) is 0x7820, just like the Moschip evaluation board. This value should be added to the device id table of mos7840.c. Here's a patch that adds these devices to the driver. From: Russell Lang Signed-off-by: Greg Kroah-Hartman --- drivers/usb/serial/mos7840.c | 9 +++++++-- 1 file changed, 7 insertions(+), 2 deletions(-) diff --git a/drivers/usb/serial/mos7840.c b/drivers/usb/serial/mos7840.c index c31940a307f..270009afdf7 100644 --- a/drivers/usb/serial/mos7840.c +++ b/drivers/usb/serial/mos7840.c @@ -124,10 +124,13 @@ #define BANDB_DEVICE_ID_USOPTL4_4 0xAC44 #define BANDB_DEVICE_ID_USOPTL4_2 0xAC42 -/* This driver also supports the ATEN UC2324 device since it is mos7840 based - * - if I knew the device id it would also support the ATEN UC2322 */ +/* This driver also supports + * ATEN UC2324 device using Moschip MCS7840 + * ATEN UC2322 device using Moschip MCS7820 + */ #define USB_VENDOR_ID_ATENINTL 0x0557 #define ATENINTL_DEVICE_ID_UC2324 0x2011 +#define ATENINTL_DEVICE_ID_UC2322 0x7820 /* Interrupt Routine Defines */ @@ -177,6 +180,7 @@ static struct usb_device_id moschip_port_id_table[] = { {USB_DEVICE(USB_VENDOR_ID_BANDB, BANDB_DEVICE_ID_USOPTL4_4)}, {USB_DEVICE(USB_VENDOR_ID_BANDB, BANDB_DEVICE_ID_USOPTL4_2)}, {USB_DEVICE(USB_VENDOR_ID_ATENINTL, ATENINTL_DEVICE_ID_UC2324)}, + {USB_DEVICE(USB_VENDOR_ID_ATENINTL, ATENINTL_DEVICE_ID_UC2322)}, {} /* terminating entry */ }; @@ -186,6 +190,7 @@ static __devinitdata struct usb_device_id moschip_id_table_combined[] = { {USB_DEVICE(USB_VENDOR_ID_BANDB, BANDB_DEVICE_ID_USOPTL4_4)}, {USB_DEVICE(USB_VENDOR_ID_BANDB, BANDB_DEVICE_ID_USOPTL4_2)}, {USB_DEVICE(USB_VENDOR_ID_ATENINTL, ATENINTL_DEVICE_ID_UC2324)}, + {USB_DEVICE(USB_VENDOR_ID_ATENINTL, ATENINTL_DEVICE_ID_UC2322)}, {} /* terminating entry */ }; -- cgit v1.2.3 From 183791588efd416fc35a71819683b32dee92615b Mon Sep 17 00:00:00 2001 From: Peng Huang Date: Wed, 22 Jul 2009 11:54:48 +0200 Subject: USB: serial: option: Add ZTE AC8710 usb modem device. Signed-off-by: Peng Huang Cc: Jiri Kosina Signed-off-by: Greg Kroah-Hartman --- drivers/usb/serial/option.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c index ff61f89918e..b6de085bc78 100644 --- a/drivers/usb/serial/option.c +++ b/drivers/usb/serial/option.c @@ -299,6 +299,7 @@ static int option_resume(struct usb_serial *serial); #define ZTE_PRODUCT_MF628 0x0015 #define ZTE_PRODUCT_MF626 0x0031 #define ZTE_PRODUCT_CDMA_TECH 0xfffe +#define ZTE_PRODUCT_AC8710 0xfff1 #define BENQ_VENDOR_ID 0x04a5 #define BENQ_PRODUCT_H10 0x4068 @@ -565,6 +566,7 @@ static struct usb_device_id option_ids[] = { { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0070, 0xff, 0xff, 0xff) }, { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0073, 0xff, 0xff, 0xff) }, { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, ZTE_PRODUCT_CDMA_TECH, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, ZTE_PRODUCT_AC8710, 0xff, 0xff, 0xff) }, { USB_DEVICE(BENQ_VENDOR_ID, BENQ_PRODUCT_H10) }, { USB_DEVICE(DLINK_VENDOR_ID, DLINK_PRODUCT_DWM_652) }, { USB_DEVICE(QISDA_VENDOR_ID, QISDA_PRODUCT_H21_4512) }, -- cgit v1.2.3 From 48c348cc939aaa3a07d4938669f2f315152e895e Mon Sep 17 00:00:00 2001 From: Javier Martin Date: Thu, 23 Jul 2009 04:03:43 +0200 Subject: USB: option.c to support Alcatel X060S/X200 broadband modems Added support for the Alcatel X060S/X200 broadband modems to the option driver. The device starts in cd-rom emulation mode (1bbb:f000) and requires the use of the usb_modeswitch tool to switch it to modem mode (1bbb:0000). Signed-off-by: Javier Martin Signed-off-by: Greg Kroah-Hartman --- drivers/usb/serial/option.c | 6 ++++++ 1 file changed, 6 insertions(+) diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c index b6de085bc78..c784ddbe7b6 100644 --- a/drivers/usb/serial/option.c +++ b/drivers/usb/serial/option.c @@ -321,6 +321,11 @@ static int option_resume(struct usb_serial *serial); #define ALINK_VENDOR_ID 0x1e0e #define ALINK_PRODUCT_3GU 0x9200 +/* ALCATEL PRODUCTS */ +#define ALCATEL_VENDOR_ID 0x1bbb +#define ALCATEL_PRODUCT_X060S 0x0000 + + static struct usb_device_id option_ids[] = { { USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_COLT) }, { USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_RICOLA) }, @@ -576,6 +581,7 @@ static struct usb_device_id option_ids[] = { { USB_DEVICE(TOSHIBA_VENDOR_ID, TOSHIBA_PRODUCT_HSDPA_MINICARD ) }, /* Toshiba 3G HSDPA == Novatel Expedite EU870D MiniCard */ { USB_DEVICE(ALINK_VENDOR_ID, 0x9000) }, { USB_DEVICE_AND_INTERFACE_INFO(ALINK_VENDOR_ID, ALINK_PRODUCT_3GU, 0xff, 0xff, 0xff) }, + { USB_DEVICE(ALCATEL_VENDOR_ID, ALCATEL_PRODUCT_X060S) }, { } /* Terminating entry */ }; MODULE_DEVICE_TABLE(usb, option_ids); -- cgit v1.2.3 From f01b017d198486ee3553bee6841f788263cf2c23 Mon Sep 17 00:00:00 2001 From: Sergei Shtylyov Date: Fri, 17 Jul 2009 17:30:03 +0300 Subject: USB: musb_gadget_ep0: fix typo in service_zero_data_request() This function uses wrong bit mask to prevent clearing RXCSR status bits when halting an endpoint -- which results in clearing SentStall and RxPktRdy bits (that the code actually tries to avoid); must be a result of cut-and-paste... Signed-off-by: Sergei Shtylyov Acked-by: David Brownell Signed-off-by: Greg Kroah-Hartman --- drivers/usb/musb/musb_gadget_ep0.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/usb/musb/musb_gadget_ep0.c b/drivers/usb/musb/musb_gadget_ep0.c index 40ed50ecedf..7a6778675ad 100644 --- a/drivers/usb/musb/musb_gadget_ep0.c +++ b/drivers/usb/musb/musb_gadget_ep0.c @@ -407,7 +407,7 @@ stall: csr |= MUSB_RXCSR_P_SENDSTALL | MUSB_RXCSR_FLUSHFIFO | MUSB_RXCSR_CLRDATATOG - | MUSB_TXCSR_P_WZC_BITS; + | MUSB_RXCSR_P_WZC_BITS; musb_writew(regs, MUSB_RXCSR, csr); } -- cgit v1.2.3 From 3a9f5bd82dc986d496d8484ff54b107b4515f43f Mon Sep 17 00:00:00 2001 From: Amit Kucheria Date: Mon, 27 Jul 2009 12:03:19 +0300 Subject: USB: musb: Refer to musb_otg_timer_func under correct #ifdef musb_otg_timer_func() is defined under #ifdef CONFIG_USB_MUSB_OTG. Make sure any reference to it is also under the same #ifdef. Without this fix, the driver failes to compile when USB_OTG is defined but USB_MUSB_OTG isn't. Signed-off-by: Amit Kucheria Cc: Felipe Balbi Cc: David Brownell Signed-off-by: Greg Kroah-Hartman --- drivers/usb/musb/musb_core.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/usb/musb/musb_core.c b/drivers/usb/musb/musb_core.c index 554a414f65d..642a4e25f7d 100644 --- a/drivers/usb/musb/musb_core.c +++ b/drivers/usb/musb/musb_core.c @@ -1990,7 +1990,7 @@ bad_config: if (status < 0) goto fail2; -#ifdef CONFIG_USB_OTG +#ifdef CONFIG_USB_MUSB_OTG setup_timer(&musb->otg_timer, musb_otg_timer_func, (unsigned long) musb); #endif -- cgit v1.2.3 From 2bbff7b742d55b094ed1467702efe146cd60c64f Mon Sep 17 00:00:00 2001 From: Ajay Kumar Gupta Date: Mon, 27 Jul 2009 14:32:15 -0700 Subject: USB: musb: fix CONFIGDATA register read issue INDEX register has to be set to '0' before reading CONFIGDATA register which is only present in TI musb platforms. Currently the default register access mode is set to FLAT_MODE thus INDEX register is not getting set properly with musb_ep_select() which is just a nop operation in FLAT_MODE.This invalid register read is causing module reinset failure. Fixing the issue by moving INDEX register write part to musb_read_configdata() function itself. Signed-off-by: Vikram Pandita Signed-off-by: Anand Gadiyar Signed-off-by: Ajay Kumar Gupta Acked-by: David Brownell Signed-off-by: Greg Kroah-Hartman --- drivers/usb/musb/musb_core.c | 1 - drivers/usb/musb/musb_regs.h | 1 + 2 files changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/usb/musb/musb_core.c b/drivers/usb/musb/musb_core.c index 642a4e25f7d..c7c1ca0494c 100644 --- a/drivers/usb/musb/musb_core.c +++ b/drivers/usb/musb/musb_core.c @@ -1326,7 +1326,6 @@ static int __init musb_core_init(u16 musb_type, struct musb *musb) int i; /* log core options (read using indexed model) */ - musb_ep_select(mbase, 0); reg = musb_read_configdata(mbase); strcpy(aInfo, (reg & MUSB_CONFIGDATA_UTMIDW) ? "UTMI-16" : "UTMI-8"); diff --git a/drivers/usb/musb/musb_regs.h b/drivers/usb/musb/musb_regs.h index de3b2f18db4..fbfd3fd9ce1 100644 --- a/drivers/usb/musb/musb_regs.h +++ b/drivers/usb/musb/musb_regs.h @@ -323,6 +323,7 @@ static inline void musb_write_rxfifoadd(void __iomem *mbase, u16 c_off) static inline u8 musb_read_configdata(void __iomem *mbase) { + musb_writeb(mbase, MUSB_INDEX, 0); return musb_readb(mbase, 0x10 + MUSB_CONFIGDATA); } -- cgit v1.2.3 From 0f157ef3a1284f41d9804ecb87fdcc8ea946b9fa Mon Sep 17 00:00:00 2001 From: Alan Stern Date: Tue, 28 Jul 2009 11:56:17 -0400 Subject: USB: usbtest: no need for USB_DEVICEFS THis patch (as1270) allows the usbtest module to be built even when USB_DEVICEFS isn't configured. Tests can be performed without USB_DEVICEFS, using the /dev/bus/usb/*/* device files. Signed-off-by: Alan Stern Signed-off-by: Greg Kroah-Hartman --- drivers/usb/misc/Kconfig | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/usb/misc/Kconfig b/drivers/usb/misc/Kconfig index a68d91a11be..abe3aa67ed0 100644 --- a/drivers/usb/misc/Kconfig +++ b/drivers/usb/misc/Kconfig @@ -220,7 +220,7 @@ config USB_IOWARRIOR config USB_TEST tristate "USB testing driver" - depends on USB && USB_DEVICEFS + depends on USB help This driver is for testing host controller software. It is used with specialized device firmware for regression and stress testing, -- cgit v1.2.3 From d8f1a5ed52a81a953918d4aebe185ba008a7be34 Mon Sep 17 00:00:00 2001 From: Roel Kluin Date: Mon, 13 Jul 2009 00:23:47 +0200 Subject: USB: xhci: fix less- and greater than confusion Without this change the loops won't start Signed-off-by: Roel Kluin Cc: Sarah Sharp Signed-off-by: Greg Kroah-Hartman --- drivers/usb/host/xhci-dbg.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/usb/host/xhci-dbg.c b/drivers/usb/host/xhci-dbg.c index 2501c571f85..56032f2d84e 100644 --- a/drivers/usb/host/xhci-dbg.c +++ b/drivers/usb/host/xhci-dbg.c @@ -419,7 +419,7 @@ void xhci_dbg_ctx(struct xhci_hcd *xhci, struct xhci_device_control *ctx, dma_ad &ctx->add_flags, (unsigned long long)dma, ctx->add_flags); dma += field_size; - for (i = 0; i > 6; ++i) { + for (i = 0; i < 6; ++i) { xhci_dbg(xhci, "@%p (virt) @%08llx (dma) %#08x - rsvd[%d]\n", &ctx->rsvd[i], (unsigned long long)dma, ctx->rsvd[i], i); @@ -443,7 +443,7 @@ void xhci_dbg_ctx(struct xhci_hcd *xhci, struct xhci_device_control *ctx, dma_ad &ctx->slot.dev_state, (unsigned long long)dma, ctx->slot.dev_state); dma += field_size; - for (i = 0; i > 4; ++i) { + for (i = 0; i < 4; ++i) { xhci_dbg(xhci, "@%p (virt) @%08llx (dma) %#08x - rsvd[%d]\n", &ctx->slot.reserved[i], (unsigned long long)dma, ctx->slot.reserved[i], i); -- cgit v1.2.3 From f9dc68fe7ad390428c6bc5d7ff582cdb5d92fcb8 Mon Sep 17 00:00:00 2001 From: Sarah Sharp Date: Mon, 27 Jul 2009 12:03:07 -0700 Subject: USB: xhci: Set TD size in transfer TRB. The 0.95 xHCI specification requires software to set the "TD size" field in each transaction request block (TRB). This field gives the host controller an indication of how much data is remaining in the TD (including the buffer in the current TRB). Set this field in bulk TRBs and data stage TRBs for control transfers. Signed-off-by: Sarah Sharp Signed-off-by: Greg Kroah-Hartman --- drivers/usb/host/xhci-ring.c | 20 +++++++++++++++----- 1 file changed, 15 insertions(+), 5 deletions(-) diff --git a/drivers/usb/host/xhci-ring.c b/drivers/usb/host/xhci-ring.c index 02d81985c45..d5b95299742 100644 --- a/drivers/usb/host/xhci-ring.c +++ b/drivers/usb/host/xhci-ring.c @@ -1285,6 +1285,7 @@ static int queue_bulk_sg_tx(struct xhci_hcd *xhci, gfp_t mem_flags, /* Queue the first TRB, even if it's zero-length */ do { u32 field = 0; + u32 length_field = 0; /* Don't change the cycle bit of the first TRB until later */ if (first_trb) @@ -1314,10 +1315,13 @@ static int queue_bulk_sg_tx(struct xhci_hcd *xhci, gfp_t mem_flags, (unsigned int) (addr + TRB_MAX_BUFF_SIZE) & ~(TRB_MAX_BUFF_SIZE - 1), (unsigned int) addr + trb_buff_len); } + length_field = TRB_LEN(trb_buff_len) | + TD_REMAINDER(urb->transfer_buffer_length - running_total) | + TRB_INTR_TARGET(0); queue_trb(xhci, ep_ring, false, (u32) addr, (u32) ((u64) addr >> 32), - TRB_LEN(trb_buff_len) | TRB_INTR_TARGET(0), + length_field, /* We always want to know if the TRB was short, * or we won't get an event when it completes. * (Unless we use event data TRBs, which are a @@ -1365,7 +1369,7 @@ int xhci_queue_bulk_tx(struct xhci_hcd *xhci, gfp_t mem_flags, struct xhci_generic_trb *start_trb; bool first_trb; int start_cycle; - u32 field; + u32 field, length_field; int running_total, trb_buff_len, ret; u64 addr; @@ -1443,10 +1447,13 @@ int xhci_queue_bulk_tx(struct xhci_hcd *xhci, gfp_t mem_flags, td->last_trb = ep_ring->enqueue; field |= TRB_IOC; } + length_field = TRB_LEN(trb_buff_len) | + TD_REMAINDER(urb->transfer_buffer_length - running_total) | + TRB_INTR_TARGET(0); queue_trb(xhci, ep_ring, false, (u32) addr, (u32) ((u64) addr >> 32), - TRB_LEN(trb_buff_len) | TRB_INTR_TARGET(0), + length_field, /* We always want to know if the TRB was short, * or we won't get an event when it completes. * (Unless we use event data TRBs, which are a @@ -1478,7 +1485,7 @@ int xhci_queue_ctrl_tx(struct xhci_hcd *xhci, gfp_t mem_flags, struct usb_ctrlrequest *setup; struct xhci_generic_trb *start_trb; int start_cycle; - u32 field; + u32 field, length_field; struct xhci_td *td; ep_ring = xhci->devs[slot_id]->ep_rings[ep_index]; @@ -1528,13 +1535,16 @@ int xhci_queue_ctrl_tx(struct xhci_hcd *xhci, gfp_t mem_flags, /* If there's data, queue data TRBs */ field = 0; + length_field = TRB_LEN(urb->transfer_buffer_length) | + TD_REMAINDER(urb->transfer_buffer_length) | + TRB_INTR_TARGET(0); if (urb->transfer_buffer_length > 0) { if (setup->bRequestType & USB_DIR_IN) field |= TRB_DIR_IN; queue_trb(xhci, ep_ring, false, lower_32_bits(urb->transfer_dma), upper_32_bits(urb->transfer_dma), - TRB_LEN(urb->transfer_buffer_length) | TRB_INTR_TARGET(0), + length_field, /* Event on short tx */ field | TRB_ISP | TRB_TYPE(TRB_DATA) | ep_ring->cycle_state); } -- cgit v1.2.3 From a1587d97ce3e53816c88b513a2038f6c5e5babd7 Mon Sep 17 00:00:00 2001 From: Sarah Sharp Date: Mon, 27 Jul 2009 12:03:15 -0700 Subject: USB: xhci: Deal with stalled endpoints. When an endpoint on a device under an xHCI host controller stalls, the host controller driver must let the hardware know that the USB core has successfully cleared the halt condition. The HCD submits a Reset Endpoint Command, which will clear the toggle bit for USB 2.0 devices, and set the sequence number to zero for USB 3.0 devices. The xHCI urb_enqueue will accept new URBs while the endpoint is halted, and will queue them to the hardware rings. However, the endpoint doorbell will not be rung until the Reset Endpoint Command completes. Don't queue a reset endpoint command for root hubs. khubd clears halt conditions on the roothub during the initialization process, but the roothub isn't a real device, so the xHCI host controller doesn't need to know about the cleared halt. Signed-off-by: Sarah Sharp Signed-off-by: Greg Kroah-Hartman --- drivers/usb/host/xhci-hcd.c | 44 +++++++++++++++++++++++++++++++++++++++++++- drivers/usb/host/xhci-pci.c | 1 + drivers/usb/host/xhci-ring.c | 36 +++++++++++++++++++++++++++++++++++- drivers/usb/host/xhci.h | 8 ++++++-- 4 files changed, 85 insertions(+), 4 deletions(-) diff --git a/drivers/usb/host/xhci-hcd.c b/drivers/usb/host/xhci-hcd.c index dba3e07ccd0..1c5901ad6eb 100644 --- a/drivers/usb/host/xhci-hcd.c +++ b/drivers/usb/host/xhci-hcd.c @@ -787,8 +787,11 @@ int xhci_add_endpoint(struct usb_hcd *hcd, struct usb_device *udev, int ret = 0; ret = xhci_check_args(hcd, udev, ep, 1, __func__); - if (ret <= 0) + if (ret <= 0) { + /* So we won't queue a reset ep command for a root hub */ + ep->hcpriv = NULL; return ret; + } xhci = hcd_to_xhci(hcd); added_ctxs = xhci_get_endpoint_flag(&ep->desc); @@ -851,6 +854,9 @@ int xhci_add_endpoint(struct usb_hcd *hcd, struct usb_device *udev, } new_slot_info = in_ctx->slot.dev_info; + /* Store the usb_device pointer for later use */ + ep->hcpriv = udev; + xhci_dbg(xhci, "add ep 0x%x, slot id %d, new drop flags = %#x, new add flags = %#x, new slot info = %#x\n", (unsigned int) ep->desc.bEndpointAddress, udev->slot_id, @@ -1026,6 +1032,42 @@ void xhci_reset_bandwidth(struct usb_hcd *hcd, struct usb_device *udev) xhci_zero_in_ctx(virt_dev); } +/* Deal with stalled endpoints. The core should have sent the control message + * to clear the halt condition. However, we need to make the xHCI hardware + * reset its sequence number, since a device will expect a sequence number of + * zero after the halt condition is cleared. + * Context: in_interrupt + */ +void xhci_endpoint_reset(struct usb_hcd *hcd, + struct usb_host_endpoint *ep) +{ + struct xhci_hcd *xhci; + struct usb_device *udev; + unsigned int ep_index; + unsigned long flags; + int ret; + + xhci = hcd_to_xhci(hcd); + udev = (struct usb_device *) ep->hcpriv; + /* Called with a root hub endpoint (or an endpoint that wasn't added + * with xhci_add_endpoint() + */ + if (!ep->hcpriv) + return; + ep_index = xhci_get_endpoint_index(&ep->desc); + + xhci_dbg(xhci, "Queueing reset endpoint command\n"); + spin_lock_irqsave(&xhci->lock, flags); + ret = xhci_queue_reset_ep(xhci, udev->slot_id, ep_index); + if (!ret) { + xhci_ring_cmd_db(xhci); + } + spin_unlock_irqrestore(&xhci->lock, flags); + + if (ret) + xhci_warn(xhci, "FIXME allocate a new ring segment\n"); +} + /* * At this point, the struct usb_device is about to go away, the device has * disconnected, and all traffic has been stopped and the endpoints have been diff --git a/drivers/usb/host/xhci-pci.c b/drivers/usb/host/xhci-pci.c index 1462709e26c..592fe7e623f 100644 --- a/drivers/usb/host/xhci-pci.c +++ b/drivers/usb/host/xhci-pci.c @@ -117,6 +117,7 @@ static const struct hc_driver xhci_pci_hc_driver = { .free_dev = xhci_free_dev, .add_endpoint = xhci_add_endpoint, .drop_endpoint = xhci_drop_endpoint, + .endpoint_reset = xhci_endpoint_reset, .check_bandwidth = xhci_check_bandwidth, .reset_bandwidth = xhci_reset_bandwidth, .address_device = xhci_address_device, diff --git a/drivers/usb/host/xhci-ring.c b/drivers/usb/host/xhci-ring.c index d5b95299742..d672ba14ff8 100644 --- a/drivers/usb/host/xhci-ring.c +++ b/drivers/usb/host/xhci-ring.c @@ -279,7 +279,8 @@ static void ring_ep_doorbell(struct xhci_hcd *xhci, /* Don't ring the doorbell for this endpoint if there are pending * cancellations because the we don't want to interrupt processing. */ - if (!ep_ring->cancels_pending && !(ep_ring->state & SET_DEQ_PENDING)) { + if (!ep_ring->cancels_pending && !(ep_ring->state & SET_DEQ_PENDING) + && !(ep_ring->state & EP_HALTED)) { field = xhci_readl(xhci, db_addr) & DB_MASK; xhci_writel(xhci, field | EPI_TO_DB(ep_index), db_addr); /* Flush PCI posted writes - FIXME Matthew Wilcox says this @@ -603,6 +604,25 @@ static void handle_set_deq_completion(struct xhci_hcd *xhci, ring_ep_doorbell(xhci, slot_id, ep_index); } +static void handle_reset_ep_completion(struct xhci_hcd *xhci, + struct xhci_event_cmd *event, + union xhci_trb *trb) +{ + int slot_id; + unsigned int ep_index; + + slot_id = TRB_TO_SLOT_ID(trb->generic.field[3]); + ep_index = TRB_TO_EP_INDEX(trb->generic.field[3]); + /* This command will only fail if the endpoint wasn't halted, + * but we don't care. + */ + xhci_dbg(xhci, "Ignoring reset ep completion code of %u\n", + (unsigned int) GET_COMP_CODE(event->status)); + + /* Clear our internal halted state and restart the ring */ + xhci->devs[slot_id]->ep_rings[ep_index]->state &= ~EP_HALTED; + ring_ep_doorbell(xhci, slot_id, ep_index); +} static void handle_cmd_completion(struct xhci_hcd *xhci, struct xhci_event_cmd *event) @@ -653,6 +673,9 @@ static void handle_cmd_completion(struct xhci_hcd *xhci, case TRB_TYPE(TRB_CMD_NOOP): ++xhci->noops_handled; break; + case TRB_TYPE(TRB_RESET_EP): + handle_reset_ep_completion(xhci, event, xhci->cmd_ring->dequeue); + break; default: /* Skip over unknown commands on the event ring */ xhci->error_bitmask |= 1 << 6; @@ -823,6 +846,7 @@ static int handle_tx_event(struct xhci_hcd *xhci, break; case COMP_STALL: xhci_warn(xhci, "WARN: Stalled endpoint\n"); + ep_ring->state |= EP_HALTED; status = -EPIPE; break; case COMP_TRB_ERR: @@ -1656,3 +1680,13 @@ static int queue_set_tr_deq(struct xhci_hcd *xhci, int slot_id, return queue_command(xhci, (u32) addr | cycle_state, 0, 0, trb_slot_id | trb_ep_index | type); } + +int xhci_queue_reset_ep(struct xhci_hcd *xhci, int slot_id, + unsigned int ep_index) +{ + u32 trb_slot_id = SLOT_ID_FOR_TRB(slot_id); + u32 trb_ep_index = EP_ID_FOR_TRB(ep_index); + u32 type = TRB_TYPE(TRB_RESET_EP); + + return queue_command(xhci, 0, 0, 0, trb_slot_id | trb_ep_index | type); +} diff --git a/drivers/usb/host/xhci.h b/drivers/usb/host/xhci.h index 8936eeb5588..cde648a524f 100644 --- a/drivers/usb/host/xhci.h +++ b/drivers/usb/host/xhci.h @@ -848,8 +848,8 @@ union xhci_trb { #define TRB_CONFIG_EP 12 /* Evaluate Context Command */ #define TRB_EVAL_CONTEXT 13 -/* Reset Transfer Ring Command */ -#define TRB_RESET_RING 14 +/* Reset Endpoint Command */ +#define TRB_RESET_EP 14 /* Stop Transfer Ring Command */ #define TRB_STOP_RING 15 /* Set Transfer Ring Dequeue Pointer Command */ @@ -929,6 +929,7 @@ struct xhci_ring { unsigned int cancels_pending; unsigned int state; #define SET_DEQ_PENDING (1 << 0) +#define EP_HALTED (1 << 1) /* The TRB that was last reported in a stopped endpoint ring */ union xhci_trb *stopped_trb; struct xhci_td *stopped_td; @@ -1128,6 +1129,7 @@ int xhci_urb_enqueue(struct usb_hcd *hcd, struct urb *urb, gfp_t mem_flags); int xhci_urb_dequeue(struct usb_hcd *hcd, struct urb *urb, int status); int xhci_add_endpoint(struct usb_hcd *hcd, struct usb_device *udev, struct usb_host_endpoint *ep); int xhci_drop_endpoint(struct usb_hcd *hcd, struct usb_device *udev, struct usb_host_endpoint *ep); +void xhci_endpoint_reset(struct usb_hcd *hcd, struct usb_host_endpoint *ep); int xhci_check_bandwidth(struct usb_hcd *hcd, struct usb_device *udev); void xhci_reset_bandwidth(struct usb_hcd *hcd, struct usb_device *udev); @@ -1148,6 +1150,8 @@ int xhci_queue_bulk_tx(struct xhci_hcd *xhci, gfp_t mem_flags, struct urb *urb, int slot_id, unsigned int ep_index); int xhci_queue_configure_endpoint(struct xhci_hcd *xhci, dma_addr_t in_ctx_ptr, u32 slot_id); +int xhci_queue_reset_ep(struct xhci_hcd *xhci, int slot_id, + unsigned int ep_index); /* xHCI roothub code */ int xhci_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue, u16 wIndex, -- cgit v1.2.3 From b11069f5f6ce6e359f853e908b0917303fcdec8f Mon Sep 17 00:00:00 2001 From: Sarah Sharp Date: Mon, 27 Jul 2009 12:03:23 -0700 Subject: USB: xhci: Use GFP_ATOMIC while holding spinlocks. The xHCI functions to queue an URB onto the hardware rings must be called with the xhci spinlock held. Those functions will allocate memory, and take a gfp_t memory flags argument. We must pass them the GFP_ATOMIC flag, since we don't want the memory allocation to attempt to sleep while waiting for more memory to become available. Signed-off-by: Sarah Sharp Signed-off-by: Greg Kroah-Hartman --- drivers/usb/host/xhci-hcd.c | 7 +++++-- 1 file changed, 5 insertions(+), 2 deletions(-) diff --git a/drivers/usb/host/xhci-hcd.c b/drivers/usb/host/xhci-hcd.c index 1c5901ad6eb..ff99365cae4 100644 --- a/drivers/usb/host/xhci-hcd.c +++ b/drivers/usb/host/xhci-hcd.c @@ -601,10 +601,13 @@ int xhci_urb_enqueue(struct usb_hcd *hcd, struct urb *urb, gfp_t mem_flags) goto exit; } if (usb_endpoint_xfer_control(&urb->ep->desc)) - ret = xhci_queue_ctrl_tx(xhci, mem_flags, urb, + /* We have a spinlock and interrupts disabled, so we must pass + * atomic context to this function, which may allocate memory. + */ + ret = xhci_queue_ctrl_tx(xhci, GFP_ATOMIC, urb, slot_id, ep_index); else if (usb_endpoint_xfer_bulk(&urb->ep->desc)) - ret = xhci_queue_bulk_tx(xhci, mem_flags, urb, + ret = xhci_queue_bulk_tx(xhci, GFP_ATOMIC, urb, slot_id, ep_index); else ret = -EINVAL; -- cgit v1.2.3 From 8e595a5d30a5ee4bb745d4da6439d73ed7d91054 Mon Sep 17 00:00:00 2001 From: Sarah Sharp Date: Mon, 27 Jul 2009 12:03:31 -0700 Subject: USB: xhci: Represent 64-bit addresses with one u64. There are several xHCI data structures that use two 32-bit fields to represent a 64-bit address. Since some architectures don't support 64-bit PCI writes, the fields need to be written in two 32-bit writes. The xHCI specification says that if a platform is incapable of generating 64-bit writes, software must write the low 32-bits first, then the high 32-bits. Hardware that supports 64-bit addressing will wait for the high 32-bit write before reading the revised value, and hardware that only supports 32-bit writes will ignore the high 32-bit write. Previous xHCI code represented 64-bit addresses with two u32 values. This lead to buggy code that would write the 32-bits in the wrong order, or forget to write the upper 32-bits. Change the two u32s to one u64 and create a function call to write all 64-bit addresses in the proper order. This new function could be modified in the future if all platforms support 64-bit writes. Signed-off-by: Sarah Sharp Signed-off-by: Greg Kroah-Hartman --- drivers/usb/host/xhci-dbg.c | 67 +++++++++++++++++--------------------------- drivers/usb/host/xhci-hcd.c | 43 +++++++++++++--------------- drivers/usb/host/xhci-mem.c | 61 ++++++++++++++++------------------------ drivers/usb/host/xhci-ring.c | 49 +++++++++++++++----------------- drivers/usb/host/xhci.h | 65 +++++++++++++++++++++++++++++------------- 5 files changed, 137 insertions(+), 148 deletions(-) diff --git a/drivers/usb/host/xhci-dbg.c b/drivers/usb/host/xhci-dbg.c index 56032f2d84e..6d62e4abe3c 100644 --- a/drivers/usb/host/xhci-dbg.c +++ b/drivers/usb/host/xhci-dbg.c @@ -173,6 +173,7 @@ void xhci_print_ir_set(struct xhci_hcd *xhci, struct xhci_intr_reg *ir_set, int { void *addr; u32 temp; + u64 temp_64; addr = &ir_set->irq_pending; temp = xhci_readl(xhci, addr); @@ -200,25 +201,15 @@ void xhci_print_ir_set(struct xhci_hcd *xhci, struct xhci_intr_reg *ir_set, int xhci_dbg(xhci, " WARN: %p: ir_set.rsvd = 0x%x\n", addr, (unsigned int)temp); - addr = &ir_set->erst_base[0]; - temp = xhci_readl(xhci, addr); - xhci_dbg(xhci, " %p: ir_set.erst_base[0] = 0x%x\n", - addr, (unsigned int) temp); - - addr = &ir_set->erst_base[1]; - temp = xhci_readl(xhci, addr); - xhci_dbg(xhci, " %p: ir_set.erst_base[1] = 0x%x\n", - addr, (unsigned int) temp); - - addr = &ir_set->erst_dequeue[0]; - temp = xhci_readl(xhci, addr); - xhci_dbg(xhci, " %p: ir_set.erst_dequeue[0] = 0x%x\n", - addr, (unsigned int) temp); + addr = &ir_set->erst_base; + temp_64 = xhci_read_64(xhci, addr); + xhci_dbg(xhci, " %p: ir_set.erst_base = @%08llx\n", + addr, temp_64); - addr = &ir_set->erst_dequeue[1]; - temp = xhci_readl(xhci, addr); - xhci_dbg(xhci, " %p: ir_set.erst_dequeue[1] = 0x%x\n", - addr, (unsigned int) temp); + addr = &ir_set->erst_dequeue; + temp_64 = xhci_read_64(xhci, addr); + xhci_dbg(xhci, " %p: ir_set.erst_dequeue = @%08llx\n", + addr, temp_64); } void xhci_print_run_regs(struct xhci_hcd *xhci) @@ -268,8 +259,7 @@ void xhci_debug_trb(struct xhci_hcd *xhci, union xhci_trb *trb) xhci_dbg(xhci, "Link TRB:\n"); xhci_print_trb_offsets(xhci, trb); - address = trb->link.segment_ptr[0] + - (((u64) trb->link.segment_ptr[1]) << 32); + address = trb->link.segment_ptr; xhci_dbg(xhci, "Next ring segment DMA address = 0x%llx\n", address); xhci_dbg(xhci, "Interrupter target = 0x%x\n", @@ -282,8 +272,7 @@ void xhci_debug_trb(struct xhci_hcd *xhci, union xhci_trb *trb) (unsigned int) (trb->link.control & TRB_NO_SNOOP)); break; case TRB_TYPE(TRB_TRANSFER): - address = trb->trans_event.buffer[0] + - (((u64) trb->trans_event.buffer[1]) << 32); + address = trb->trans_event.buffer; /* * FIXME: look at flags to figure out if it's an address or if * the data is directly in the buffer field. @@ -291,8 +280,7 @@ void xhci_debug_trb(struct xhci_hcd *xhci, union xhci_trb *trb) xhci_dbg(xhci, "DMA address or buffer contents= %llu\n", address); break; case TRB_TYPE(TRB_COMPLETION): - address = trb->event_cmd.cmd_trb[0] + - (((u64) trb->event_cmd.cmd_trb[1]) << 32); + address = trb->event_cmd.cmd_trb; xhci_dbg(xhci, "Command TRB pointer = %llu\n", address); xhci_dbg(xhci, "Completion status = %u\n", (unsigned int) GET_COMP_CODE(trb->event_cmd.status)); @@ -328,8 +316,8 @@ void xhci_debug_segment(struct xhci_hcd *xhci, struct xhci_segment *seg) for (i = 0; i < TRBS_PER_SEGMENT; ++i) { trb = &seg->trbs[i]; xhci_dbg(xhci, "@%08x %08x %08x %08x %08x\n", addr, - (unsigned int) trb->link.segment_ptr[0], - (unsigned int) trb->link.segment_ptr[1], + lower_32_bits(trb->link.segment_ptr), + upper_32_bits(trb->link.segment_ptr), (unsigned int) trb->link.intr_target, (unsigned int) trb->link.control); addr += sizeof(*trb); @@ -386,8 +374,8 @@ void xhci_dbg_erst(struct xhci_hcd *xhci, struct xhci_erst *erst) entry = &erst->entries[i]; xhci_dbg(xhci, "@%08x %08x %08x %08x %08x\n", (unsigned int) addr, - (unsigned int) entry->seg_addr[0], - (unsigned int) entry->seg_addr[1], + lower_32_bits(entry->seg_addr), + upper_32_bits(entry->seg_addr), (unsigned int) entry->seg_size, (unsigned int) entry->rsvd); addr += sizeof(*entry); @@ -396,12 +384,13 @@ void xhci_dbg_erst(struct xhci_hcd *xhci, struct xhci_erst *erst) void xhci_dbg_cmd_ptrs(struct xhci_hcd *xhci) { - u32 val; + u64 val; - val = xhci_readl(xhci, &xhci->op_regs->cmd_ring[0]); - xhci_dbg(xhci, "// xHC command ring deq ptr low bits + flags = 0x%x\n", val); - val = xhci_readl(xhci, &xhci->op_regs->cmd_ring[1]); - xhci_dbg(xhci, "// xHC command ring deq ptr high bits = 0x%x\n", val); + val = xhci_read_64(xhci, &xhci->op_regs->cmd_ring); + xhci_dbg(xhci, "// xHC command ring deq ptr low bits + flags = @%08x\n", + lower_32_bits(val)); + xhci_dbg(xhci, "// xHC command ring deq ptr high bits = @%08x\n", + upper_32_bits(val)); } void xhci_dbg_ctx(struct xhci_hcd *xhci, struct xhci_device_control *ctx, dma_addr_t dma, unsigned int last_ep) @@ -462,14 +451,10 @@ void xhci_dbg_ctx(struct xhci_hcd *xhci, struct xhci_device_control *ctx, dma_ad &ctx->ep[i].ep_info2, (unsigned long long)dma, ctx->ep[i].ep_info2); dma += field_size; - xhci_dbg(xhci, "@%p (virt) @%08llx (dma) %#08x - deq[0]\n", - &ctx->ep[i].deq[0], - (unsigned long long)dma, ctx->ep[i].deq[0]); - dma += field_size; - xhci_dbg(xhci, "@%p (virt) @%08llx (dma) %#08x - deq[1]\n", - &ctx->ep[i].deq[1], - (unsigned long long)dma, ctx->ep[i].deq[1]); - dma += field_size; + xhci_dbg(xhci, "@%p (virt) @%08llx (dma) %#08llx - deq\n", + &ctx->ep[i].deq, + (unsigned long long)dma, ctx->ep[i].deq); + dma += 2*field_size; xhci_dbg(xhci, "@%p (virt) @%08llx (dma) %#08x - tx_info\n", &ctx->ep[i].tx_info, (unsigned long long)dma, ctx->ep[i].tx_info); diff --git a/drivers/usb/host/xhci-hcd.c b/drivers/usb/host/xhci-hcd.c index ff99365cae4..e15773598e4 100644 --- a/drivers/usb/host/xhci-hcd.c +++ b/drivers/usb/host/xhci-hcd.c @@ -226,6 +226,7 @@ int xhci_init(struct usb_hcd *hcd) static void xhci_work(struct xhci_hcd *xhci) { u32 temp; + u64 temp_64; /* * Clear the op reg interrupt status first, @@ -249,8 +250,8 @@ static void xhci_work(struct xhci_hcd *xhci) xhci_handle_event(xhci); /* Clear the event handler busy flag; the event ring should be empty. */ - temp = xhci_readl(xhci, &xhci->ir_set->erst_dequeue[0]); - xhci_writel(xhci, temp & ~ERST_EHB, &xhci->ir_set->erst_dequeue[0]); + temp_64 = xhci_read_64(xhci, &xhci->ir_set->erst_dequeue); + xhci_write_64(xhci, temp_64 & ~ERST_EHB, &xhci->ir_set->erst_dequeue); /* Flush posted writes -- FIXME is this necessary? */ xhci_readl(xhci, &xhci->ir_set->irq_pending); } @@ -295,6 +296,7 @@ void xhci_event_ring_work(unsigned long arg) { unsigned long flags; int temp; + u64 temp_64; struct xhci_hcd *xhci = (struct xhci_hcd *) arg; int i, j; @@ -311,9 +313,9 @@ void xhci_event_ring_work(unsigned long arg) xhci_dbg(xhci, "Event ring:\n"); xhci_debug_segment(xhci, xhci->event_ring->deq_seg); xhci_dbg_ring_ptrs(xhci, xhci->event_ring); - temp = xhci_readl(xhci, &xhci->ir_set->erst_dequeue[0]); - temp &= ERST_PTR_MASK; - xhci_dbg(xhci, "ERST deq = 0x%x\n", temp); + temp_64 = xhci_read_64(xhci, &xhci->ir_set->erst_dequeue); + temp_64 &= ~ERST_PTR_MASK; + xhci_dbg(xhci, "ERST deq = 64'h%0lx\n", (long unsigned int) temp_64); xhci_dbg(xhci, "Command ring:\n"); xhci_debug_segment(xhci, xhci->cmd_ring->deq_seg); xhci_dbg_ring_ptrs(xhci, xhci->cmd_ring); @@ -356,6 +358,7 @@ void xhci_event_ring_work(unsigned long arg) int xhci_run(struct usb_hcd *hcd) { u32 temp; + u64 temp_64; struct xhci_hcd *xhci = hcd_to_xhci(hcd); void (*doorbell)(struct xhci_hcd *) = NULL; @@ -416,11 +419,9 @@ int xhci_run(struct usb_hcd *hcd) xhci_dbg(xhci, "Event ring:\n"); xhci_debug_ring(xhci, xhci->event_ring); xhci_dbg_ring_ptrs(xhci, xhci->event_ring); - temp = xhci_readl(xhci, &xhci->ir_set->erst_dequeue[0]); - temp &= ERST_PTR_MASK; - xhci_dbg(xhci, "ERST deq = 0x%x\n", temp); - temp = xhci_readl(xhci, &xhci->ir_set->erst_dequeue[1]); - xhci_dbg(xhci, "ERST deq upper = 0x%x\n", temp); + temp_64 = xhci_read_64(xhci, &xhci->ir_set->erst_dequeue); + temp_64 &= ~ERST_PTR_MASK; + xhci_dbg(xhci, "ERST deq = 64'h%0lx\n", (long unsigned int) temp_64); temp = xhci_readl(xhci, &xhci->op_regs->command); temp |= (CMD_RUN); @@ -888,8 +889,7 @@ static void xhci_zero_in_ctx(struct xhci_virt_device *virt_dev) ep_ctx = &virt_dev->in_ctx->ep[i]; ep_ctx->ep_info = 0; ep_ctx->ep_info2 = 0; - ep_ctx->deq[0] = 0; - ep_ctx->deq[1] = 0; + ep_ctx->deq = 0; ep_ctx->tx_info = 0; } } @@ -1165,7 +1165,7 @@ int xhci_address_device(struct usb_hcd *hcd, struct usb_device *udev) struct xhci_virt_device *virt_dev; int ret = 0; struct xhci_hcd *xhci = hcd_to_xhci(hcd); - u32 temp; + u64 temp_64; if (!udev->slot_id) { xhci_dbg(xhci, "Bad Slot ID %d\n", udev->slot_id); @@ -1227,18 +1227,13 @@ int xhci_address_device(struct usb_hcd *hcd, struct usb_device *udev) if (ret) { return ret; } - temp = xhci_readl(xhci, &xhci->op_regs->dcbaa_ptr[0]); - xhci_dbg(xhci, "Op regs DCBAA ptr[0] = %#08x\n", temp); - temp = xhci_readl(xhci, &xhci->op_regs->dcbaa_ptr[1]); - xhci_dbg(xhci, "Op regs DCBAA ptr[1] = %#08x\n", temp); - xhci_dbg(xhci, "Slot ID %d dcbaa entry[0] @%p = %#08x\n", - udev->slot_id, - &xhci->dcbaa->dev_context_ptrs[2*udev->slot_id], - xhci->dcbaa->dev_context_ptrs[2*udev->slot_id]); - xhci_dbg(xhci, "Slot ID %d dcbaa entry[1] @%p = %#08x\n", + temp_64 = xhci_read_64(xhci, &xhci->op_regs->dcbaa_ptr); + xhci_dbg(xhci, "Op regs DCBAA ptr = %#016llx\n", temp_64); + xhci_dbg(xhci, "Slot ID %d dcbaa entry @%p = %#016llx\n", udev->slot_id, - &xhci->dcbaa->dev_context_ptrs[2*udev->slot_id+1], - xhci->dcbaa->dev_context_ptrs[2*udev->slot_id+1]); + &xhci->dcbaa->dev_context_ptrs[udev->slot_id], + (unsigned long long) + xhci->dcbaa->dev_context_ptrs[udev->slot_id]); xhci_dbg(xhci, "Output Context DMA address = %#08llx\n", (unsigned long long)virt_dev->out_ctx_dma); xhci_dbg(xhci, "Slot ID %d Input Context:\n", udev->slot_id); diff --git a/drivers/usb/host/xhci-mem.c b/drivers/usb/host/xhci-mem.c index c8a72de1c50..ec825f16dce 100644 --- a/drivers/usb/host/xhci-mem.c +++ b/drivers/usb/host/xhci-mem.c @@ -88,7 +88,7 @@ static void xhci_link_segments(struct xhci_hcd *xhci, struct xhci_segment *prev, return; prev->next = next; if (link_trbs) { - prev->trbs[TRBS_PER_SEGMENT-1].link.segment_ptr[0] = next->dma; + prev->trbs[TRBS_PER_SEGMENT-1].link.segment_ptr = next->dma; /* Set the last TRB in the segment to have a TRB type ID of Link TRB */ val = prev->trbs[TRBS_PER_SEGMENT-1].link.control; @@ -200,8 +200,7 @@ void xhci_free_virt_device(struct xhci_hcd *xhci, int slot_id) return; dev = xhci->devs[slot_id]; - xhci->dcbaa->dev_context_ptrs[2*slot_id] = 0; - xhci->dcbaa->dev_context_ptrs[2*slot_id + 1] = 0; + xhci->dcbaa->dev_context_ptrs[slot_id] = 0; if (!dev) return; @@ -265,13 +264,12 @@ int xhci_alloc_virt_device(struct xhci_hcd *xhci, int slot_id, * Point to output device context in dcbaa; skip the output control * context, which is eight 32 bit fields (or 32 bytes long) */ - xhci->dcbaa->dev_context_ptrs[2*slot_id] = + xhci->dcbaa->dev_context_ptrs[slot_id] = (u32) dev->out_ctx_dma + (32); xhci_dbg(xhci, "Set slot id %d dcbaa entry %p to 0x%llx\n", slot_id, - &xhci->dcbaa->dev_context_ptrs[2*slot_id], + &xhci->dcbaa->dev_context_ptrs[slot_id], (unsigned long long)dev->out_ctx_dma); - xhci->dcbaa->dev_context_ptrs[2*slot_id + 1] = 0; return 1; fail: @@ -360,10 +358,9 @@ int xhci_setup_addressable_virt_dev(struct xhci_hcd *xhci, struct usb_device *ud ep0_ctx->ep_info2 |= MAX_BURST(0); ep0_ctx->ep_info2 |= ERROR_COUNT(3); - ep0_ctx->deq[0] = + ep0_ctx->deq = dev->ep_rings[0]->first_seg->dma; - ep0_ctx->deq[0] |= dev->ep_rings[0]->cycle_state; - ep0_ctx->deq[1] = 0; + ep0_ctx->deq |= dev->ep_rings[0]->cycle_state; /* Steps 7 and 8 were done in xhci_alloc_virt_device() */ @@ -477,8 +474,7 @@ int xhci_endpoint_init(struct xhci_hcd *xhci, if (!virt_dev->new_ep_rings[ep_index]) return -ENOMEM; ep_ring = virt_dev->new_ep_rings[ep_index]; - ep_ctx->deq[0] = ep_ring->first_seg->dma | ep_ring->cycle_state; - ep_ctx->deq[1] = 0; + ep_ctx->deq = ep_ring->first_seg->dma | ep_ring->cycle_state; ep_ctx->ep_info = xhci_get_endpoint_interval(udev, ep); @@ -535,8 +531,7 @@ void xhci_endpoint_zero(struct xhci_hcd *xhci, ep_ctx->ep_info = 0; ep_ctx->ep_info2 = 0; - ep_ctx->deq[0] = 0; - ep_ctx->deq[1] = 0; + ep_ctx->deq = 0; ep_ctx->tx_info = 0; /* Don't free the endpoint ring until the set interface or configuration * request succeeds. @@ -551,10 +546,8 @@ void xhci_mem_cleanup(struct xhci_hcd *xhci) /* Free the Event Ring Segment Table and the actual Event Ring */ xhci_writel(xhci, 0, &xhci->ir_set->erst_size); - xhci_writel(xhci, 0, &xhci->ir_set->erst_base[0]); - xhci_writel(xhci, 0, &xhci->ir_set->erst_base[1]); - xhci_writel(xhci, 0, &xhci->ir_set->erst_dequeue[0]); - xhci_writel(xhci, 0, &xhci->ir_set->erst_dequeue[1]); + xhci_write_64(xhci, 0, &xhci->ir_set->erst_base); + xhci_write_64(xhci, 0, &xhci->ir_set->erst_dequeue); size = sizeof(struct xhci_erst_entry)*(xhci->erst.num_entries); if (xhci->erst.entries) pci_free_consistent(pdev, size, @@ -566,8 +559,7 @@ void xhci_mem_cleanup(struct xhci_hcd *xhci) xhci->event_ring = NULL; xhci_dbg(xhci, "Freed event ring\n"); - xhci_writel(xhci, 0, &xhci->op_regs->cmd_ring[0]); - xhci_writel(xhci, 0, &xhci->op_regs->cmd_ring[1]); + xhci_write_64(xhci, 0, &xhci->op_regs->cmd_ring); if (xhci->cmd_ring) xhci_ring_free(xhci, xhci->cmd_ring); xhci->cmd_ring = NULL; @@ -586,8 +578,7 @@ void xhci_mem_cleanup(struct xhci_hcd *xhci) xhci->device_pool = NULL; xhci_dbg(xhci, "Freed device context pool\n"); - xhci_writel(xhci, 0, &xhci->op_regs->dcbaa_ptr[0]); - xhci_writel(xhci, 0, &xhci->op_regs->dcbaa_ptr[1]); + xhci_write_64(xhci, 0, &xhci->op_regs->dcbaa_ptr); if (xhci->dcbaa) pci_free_consistent(pdev, sizeof(*xhci->dcbaa), xhci->dcbaa, xhci->dcbaa->dma); @@ -602,6 +593,7 @@ int xhci_mem_init(struct xhci_hcd *xhci, gfp_t flags) dma_addr_t dma; struct device *dev = xhci_to_hcd(xhci)->self.controller; unsigned int val, val2; + u64 val_64; struct xhci_segment *seg; u32 page_size; int i; @@ -647,8 +639,7 @@ int xhci_mem_init(struct xhci_hcd *xhci, gfp_t flags) xhci->dcbaa->dma = dma; xhci_dbg(xhci, "// Device context base array address = 0x%llx (DMA), %p (virt)\n", (unsigned long long)xhci->dcbaa->dma, xhci->dcbaa); - xhci_writel(xhci, dma, &xhci->op_regs->dcbaa_ptr[0]); - xhci_writel(xhci, (u32) 0, &xhci->op_regs->dcbaa_ptr[1]); + xhci_write_64(xhci, dma, &xhci->op_regs->dcbaa_ptr); /* * Initialize the ring segment pool. The ring must be a contiguous @@ -675,14 +666,12 @@ int xhci_mem_init(struct xhci_hcd *xhci, gfp_t flags) (unsigned long long)xhci->cmd_ring->first_seg->dma); /* Set the address in the Command Ring Control register */ - val = xhci_readl(xhci, &xhci->op_regs->cmd_ring[0]); - val = (val & ~CMD_RING_ADDR_MASK) | - (xhci->cmd_ring->first_seg->dma & CMD_RING_ADDR_MASK) | + val_64 = xhci_read_64(xhci, &xhci->op_regs->cmd_ring); + val_64 = (val_64 & (u64) CMD_RING_RSVD_BITS) | + (xhci->cmd_ring->first_seg->dma & (u64) ~CMD_RING_RSVD_BITS) | xhci->cmd_ring->cycle_state; - xhci_dbg(xhci, "// Setting command ring address low bits to 0x%x\n", val); - xhci_writel(xhci, val, &xhci->op_regs->cmd_ring[0]); - xhci_dbg(xhci, "// Setting command ring address high bits to 0x0\n"); - xhci_writel(xhci, (u32) 0, &xhci->op_regs->cmd_ring[1]); + xhci_dbg(xhci, "// Setting command ring address to 0x%x\n", val); + xhci_write_64(xhci, val_64, &xhci->op_regs->cmd_ring); xhci_dbg_cmd_ptrs(xhci); val = xhci_readl(xhci, &xhci->cap_regs->db_off); @@ -722,8 +711,7 @@ int xhci_mem_init(struct xhci_hcd *xhci, gfp_t flags) /* set ring base address and size for each segment table entry */ for (val = 0, seg = xhci->event_ring->first_seg; val < ERST_NUM_SEGS; val++) { struct xhci_erst_entry *entry = &xhci->erst.entries[val]; - entry->seg_addr[0] = seg->dma; - entry->seg_addr[1] = 0; + entry->seg_addr = seg->dma; entry->seg_size = TRBS_PER_SEGMENT; entry->rsvd = 0; seg = seg->next; @@ -741,11 +729,10 @@ int xhci_mem_init(struct xhci_hcd *xhci, gfp_t flags) /* set the segment table base address */ xhci_dbg(xhci, "// Set ERST base address for ir_set 0 = 0x%llx\n", (unsigned long long)xhci->erst.erst_dma_addr); - val = xhci_readl(xhci, &xhci->ir_set->erst_base[0]); - val &= ERST_PTR_MASK; - val |= (xhci->erst.erst_dma_addr & ~ERST_PTR_MASK); - xhci_writel(xhci, val, &xhci->ir_set->erst_base[0]); - xhci_writel(xhci, 0, &xhci->ir_set->erst_base[1]); + val_64 = xhci_read_64(xhci, &xhci->ir_set->erst_base); + val_64 &= ERST_PTR_MASK; + val_64 |= (xhci->erst.erst_dma_addr & (u64) ~ERST_PTR_MASK); + xhci_write_64(xhci, val_64, &xhci->ir_set->erst_base); /* Set the event ring dequeue address */ xhci_set_hc_event_deq(xhci); diff --git a/drivers/usb/host/xhci-ring.c b/drivers/usb/host/xhci-ring.c index d672ba14ff8..588686fca47 100644 --- a/drivers/usb/host/xhci-ring.c +++ b/drivers/usb/host/xhci-ring.c @@ -237,7 +237,7 @@ static int room_on_ring(struct xhci_hcd *xhci, struct xhci_ring *ring, void xhci_set_hc_event_deq(struct xhci_hcd *xhci) { - u32 temp; + u64 temp; dma_addr_t deq; deq = xhci_trb_virt_to_dma(xhci->event_ring->deq_seg, @@ -246,13 +246,12 @@ void xhci_set_hc_event_deq(struct xhci_hcd *xhci) xhci_warn(xhci, "WARN something wrong with SW event ring " "dequeue ptr.\n"); /* Update HC event ring dequeue pointer */ - temp = xhci_readl(xhci, &xhci->ir_set->erst_dequeue[0]); + temp = xhci_read_64(xhci, &xhci->ir_set->erst_dequeue); temp &= ERST_PTR_MASK; if (!in_interrupt()) xhci_dbg(xhci, "// Write event ring dequeue pointer\n"); - xhci_writel(xhci, 0, &xhci->ir_set->erst_dequeue[1]); - xhci_writel(xhci, (deq & ~ERST_PTR_MASK) | temp, - &xhci->ir_set->erst_dequeue[0]); + xhci_write_64(xhci, ((u64) deq & (u64) ~ERST_PTR_MASK) | temp, + &xhci->ir_set->erst_dequeue); } /* Ring the host controller doorbell after placing a command on the ring */ @@ -352,7 +351,7 @@ static void find_new_dequeue_state(struct xhci_hcd *xhci, if (!state->new_deq_seg) BUG(); /* Dig out the cycle state saved by the xHC during the stop ep cmd */ - state->new_cycle_state = 0x1 & dev->out_ctx->ep[ep_index].deq[0]; + state->new_cycle_state = 0x1 & dev->out_ctx->ep[ep_index].deq; state->new_deq_ptr = cur_td->last_trb; state->new_deq_seg = find_trb_seg(state->new_deq_seg, @@ -594,10 +593,8 @@ static void handle_set_deq_completion(struct xhci_hcd *xhci, * cancelling URBs, which might not be an error... */ } else { - xhci_dbg(xhci, "Successful Set TR Deq Ptr cmd, deq[0] = 0x%x, " - "deq[1] = 0x%x.\n", - dev->out_ctx->ep[ep_index].deq[0], - dev->out_ctx->ep[ep_index].deq[1]); + xhci_dbg(xhci, "Successful Set TR Deq Ptr cmd, deq = @%08llx\n", + dev->out_ctx->ep[ep_index].deq); } ep_ring->state &= ~SET_DEQ_PENDING; @@ -631,7 +628,7 @@ static void handle_cmd_completion(struct xhci_hcd *xhci, u64 cmd_dma; dma_addr_t cmd_dequeue_dma; - cmd_dma = (((u64) event->cmd_trb[1]) << 32) + event->cmd_trb[0]; + cmd_dma = event->cmd_trb; cmd_dequeue_dma = xhci_trb_virt_to_dma(xhci->cmd_ring->deq_seg, xhci->cmd_ring->dequeue); /* Is the command ring deq ptr out of sync with the deq seg ptr? */ @@ -794,10 +791,7 @@ static int handle_tx_event(struct xhci_hcd *xhci, return -ENODEV; } - event_dma = event->buffer[0]; - if (event->buffer[1] != 0) - xhci_warn(xhci, "WARN ignoring upper 32-bits of 64-bit TRB dma address\n"); - + event_dma = event->buffer; /* This TRB should be in the TD at the head of this ring's TD list */ if (list_empty(&ep_ring->td_list)) { xhci_warn(xhci, "WARN Event TRB for slot %d ep %d with no TDs queued?\n", @@ -821,10 +815,10 @@ static int handle_tx_event(struct xhci_hcd *xhci, event_trb = &event_seg->trbs[(event_dma - event_seg->dma) / sizeof(*event_trb)]; xhci_dbg(xhci, "Event TRB with TRB type ID %u\n", (unsigned int) (event->flags & TRB_TYPE_BITMASK)>>10); - xhci_dbg(xhci, "Offset 0x00 (buffer[0]) = 0x%x\n", - (unsigned int) event->buffer[0]); - xhci_dbg(xhci, "Offset 0x04 (buffer[0]) = 0x%x\n", - (unsigned int) event->buffer[1]); + xhci_dbg(xhci, "Offset 0x00 (buffer lo) = 0x%x\n", + lower_32_bits(event->buffer)); + xhci_dbg(xhci, "Offset 0x04 (buffer hi) = 0x%x\n", + upper_32_bits(event->buffer)); xhci_dbg(xhci, "Offset 0x08 (transfer length) = 0x%x\n", (unsigned int) event->transfer_len); xhci_dbg(xhci, "Offset 0x0C (flags) = 0x%x\n", @@ -1343,8 +1337,8 @@ static int queue_bulk_sg_tx(struct xhci_hcd *xhci, gfp_t mem_flags, TD_REMAINDER(urb->transfer_buffer_length - running_total) | TRB_INTR_TARGET(0); queue_trb(xhci, ep_ring, false, - (u32) addr, - (u32) ((u64) addr >> 32), + lower_32_bits(addr), + upper_32_bits(addr), length_field, /* We always want to know if the TRB was short, * or we won't get an event when it completes. @@ -1475,8 +1469,8 @@ int xhci_queue_bulk_tx(struct xhci_hcd *xhci, gfp_t mem_flags, TD_REMAINDER(urb->transfer_buffer_length - running_total) | TRB_INTR_TARGET(0); queue_trb(xhci, ep_ring, false, - (u32) addr, - (u32) ((u64) addr >> 32), + lower_32_bits(addr), + upper_32_bits(addr), length_field, /* We always want to know if the TRB was short, * or we won't get an event when it completes. @@ -1637,7 +1631,8 @@ int xhci_queue_slot_control(struct xhci_hcd *xhci, u32 trb_type, u32 slot_id) int xhci_queue_address_device(struct xhci_hcd *xhci, dma_addr_t in_ctx_ptr, u32 slot_id) { - return queue_command(xhci, in_ctx_ptr, 0, 0, + return queue_command(xhci, lower_32_bits(in_ctx_ptr), + upper_32_bits(in_ctx_ptr), 0, TRB_TYPE(TRB_ADDR_DEV) | SLOT_ID_FOR_TRB(slot_id)); } @@ -1645,7 +1640,8 @@ int xhci_queue_address_device(struct xhci_hcd *xhci, dma_addr_t in_ctx_ptr, int xhci_queue_configure_endpoint(struct xhci_hcd *xhci, dma_addr_t in_ctx_ptr, u32 slot_id) { - return queue_command(xhci, in_ctx_ptr, 0, 0, + return queue_command(xhci, lower_32_bits(in_ctx_ptr), + upper_32_bits(in_ctx_ptr), 0, TRB_TYPE(TRB_CONFIG_EP) | SLOT_ID_FOR_TRB(slot_id)); } @@ -1677,7 +1673,8 @@ static int queue_set_tr_deq(struct xhci_hcd *xhci, int slot_id, xhci_warn(xhci, "WARN Cannot submit Set TR Deq Ptr\n"); xhci_warn(xhci, "WARN deq seg = %p, deq pt = %p\n", deq_seg, deq_ptr); - return queue_command(xhci, (u32) addr | cycle_state, 0, 0, + return queue_command(xhci, lower_32_bits(addr) | cycle_state, + upper_32_bits(addr), 0, trb_slot_id | trb_ep_index | type); } diff --git a/drivers/usb/host/xhci.h b/drivers/usb/host/xhci.h index cde648a524f..60770c89132 100644 --- a/drivers/usb/host/xhci.h +++ b/drivers/usb/host/xhci.h @@ -25,6 +25,7 @@ #include #include +#include #include "../core/hcd.h" /* Code sharing between pci-quirks and xhci hcd */ @@ -42,14 +43,6 @@ * xHCI register interface. * This corresponds to the eXtensible Host Controller Interface (xHCI) * Revision 0.95 specification - * - * Registers should always be accessed with double word or quad word accesses. - * - * Some xHCI implementations may support 64-bit address pointers. Registers - * with 64-bit address pointers should be written to with dword accesses by - * writing the low dword first (ptr[0]), then the high dword (ptr[1]) second. - * xHCI implementations that do not support 64-bit address pointers will ignore - * the high dword, and write order is irrelevant. */ /** @@ -166,10 +159,10 @@ struct xhci_op_regs { u32 reserved1; u32 reserved2; u32 dev_notification; - u32 cmd_ring[2]; + u64 cmd_ring; /* rsvd: offset 0x20-2F */ u32 reserved3[4]; - u32 dcbaa_ptr[2]; + u64 dcbaa_ptr; u32 config_reg; /* rsvd: offset 0x3C-3FF */ u32 reserved4[241]; @@ -254,7 +247,7 @@ struct xhci_op_regs { #define CMD_RING_RUNNING (1 << 3) /* bits 4:5 reserved and should be preserved */ /* Command Ring pointer - bit mask for the lower 32 bits. */ -#define CMD_RING_ADDR_MASK (0xffffffc0) +#define CMD_RING_RSVD_BITS (0x3f) /* CONFIG - Configure Register - config_reg bitmasks */ /* bits 0:7 - maximum number of device slots enabled (NumSlotsEn) */ @@ -382,8 +375,8 @@ struct xhci_intr_reg { u32 irq_control; u32 erst_size; u32 rsvd; - u32 erst_base[2]; - u32 erst_dequeue[2]; + u64 erst_base; + u64 erst_dequeue; }; /* irq_pending bitmasks */ @@ -538,7 +531,7 @@ struct xhci_slot_ctx { struct xhci_ep_ctx { u32 ep_info; u32 ep_info2; - u32 deq[2]; + u64 deq; u32 tx_info; /* offset 0x14 - 0x1f reserved for HC internal use */ u32 reserved[3]; @@ -641,7 +634,7 @@ struct xhci_virt_device { */ struct xhci_device_context_array { /* 64-bit device addresses; we only write 32-bit addresses */ - u32 dev_context_ptrs[2*MAX_HC_SLOTS]; + u64 dev_context_ptrs[MAX_HC_SLOTS]; /* private xHCD pointers */ dma_addr_t dma; }; @@ -654,7 +647,7 @@ struct xhci_device_context_array { struct xhci_stream_ctx { /* 64-bit stream ring address, cycle state, and stream type */ - u32 stream_ring[2]; + u64 stream_ring; /* offset 0x14 - 0x1f reserved for HC internal use */ u32 reserved[2]; }; @@ -662,7 +655,7 @@ struct xhci_stream_ctx { struct xhci_transfer_event { /* 64-bit buffer address, or immediate data */ - u32 buffer[2]; + u64 buffer; u32 transfer_len; /* This field is interpreted differently based on the type of TRB */ u32 flags; @@ -744,7 +737,7 @@ struct xhci_transfer_event { struct xhci_link_trb { /* 64-bit segment pointer*/ - u32 segment_ptr[2]; + u64 segment_ptr; u32 intr_target; u32 control; }; @@ -755,7 +748,7 @@ struct xhci_link_trb { /* Command completion event TRB */ struct xhci_event_cmd { /* Pointer to command TRB, or the value passed by the event data trb */ - u32 cmd_trb[2]; + u64 cmd_trb; u32 status; u32 flags; }; @@ -943,7 +936,7 @@ struct xhci_ring { struct xhci_erst_entry { /* 64-bit event ring segment address */ - u32 seg_addr[2]; + u64 seg_addr; u32 seg_size; /* Set to zero */ u32 rsvd; @@ -1079,6 +1072,38 @@ static inline void xhci_writel(struct xhci_hcd *xhci, writel(val, regs); } +/* + * Registers should always be accessed with double word or quad word accesses. + * + * Some xHCI implementations may support 64-bit address pointers. Registers + * with 64-bit address pointers should be written to with dword accesses by + * writing the low dword first (ptr[0]), then the high dword (ptr[1]) second. + * xHCI implementations that do not support 64-bit address pointers will ignore + * the high dword, and write order is irrelevant. + */ +static inline u64 xhci_read_64(const struct xhci_hcd *xhci, + __u64 __iomem *regs) +{ + __u32 __iomem *ptr = (__u32 __iomem *) regs; + u64 val_lo = readl(ptr); + u64 val_hi = readl(ptr + 1); + return val_lo + (val_hi << 32); +} +static inline void xhci_write_64(struct xhci_hcd *xhci, + const u64 val, __u64 __iomem *regs) +{ + __u32 __iomem *ptr = (__u32 __iomem *) regs; + u32 val_lo = lower_32_bits(val); + u32 val_hi = upper_32_bits(val); + + if (!in_interrupt()) + xhci_dbg(xhci, + "`MEM_WRITE_DWORD(3'b000, 64'h%p, 64'h%0lx, 4'hf);\n", + regs, (long unsigned int) val); + writel(val_lo, ptr); + writel(val_hi, ptr + 1); +} + /* xHCI debugging */ void xhci_print_ir_set(struct xhci_hcd *xhci, struct xhci_intr_reg *ir_set, int set_num); void xhci_print_registers(struct xhci_hcd *xhci); -- cgit v1.2.3 From 62889610f5591005bed9517360e17531684f72d0 Mon Sep 17 00:00:00 2001 From: Sarah Sharp Date: Mon, 27 Jul 2009 12:03:36 -0700 Subject: USB: xhci: Handle short control packets correctly. When there is a short packet on a control transfer, the xHCI host controller hardware will generate two events. The first event will be for the data stage TD with a completion code for a short packet. The second event will be for the status stage with a successful completion code. Before this patch, the xHCI driver would giveback the short control URB when it received the event for the data stage TD. Then it would become confused when it saw a status stage event for the endpoint for an URB it had already finished processing. Change the xHCI host controller driver to wait for the status stage event when it receives a short transfer completion code for a data stage TD. Signed-off-by: Sarah Sharp Signed-off-by: Greg Kroah-Hartman --- drivers/usb/host/xhci-ring.c | 14 +++++++++++--- 1 file changed, 11 insertions(+), 3 deletions(-) diff --git a/drivers/usb/host/xhci-ring.c b/drivers/usb/host/xhci-ring.c index 588686fca47..5dd3b1fd71c 100644 --- a/drivers/usb/host/xhci-ring.c +++ b/drivers/usb/host/xhci-ring.c @@ -892,15 +892,23 @@ static int handle_tx_event(struct xhci_hcd *xhci, if (event_trb != ep_ring->dequeue) { /* The event was for the status stage */ if (event_trb == td->last_trb) { - td->urb->actual_length = - td->urb->transfer_buffer_length; + /* Did we already see a short data stage? */ + if (td->urb->actual_length != 0) + status = -EREMOTEIO; + else + td->urb->actual_length = + td->urb->transfer_buffer_length; } else { /* Maybe the event was for the data stage? */ - if (GET_COMP_CODE(event->transfer_len) != COMP_STOP_INVAL) + if (GET_COMP_CODE(event->transfer_len) != COMP_STOP_INVAL) { /* We didn't stop on a link TRB in the middle */ td->urb->actual_length = td->urb->transfer_buffer_length - TRB_LEN(event->transfer_len); + xhci_dbg(xhci, "Waiting for status stage event\n"); + urb = NULL; + goto cleanup; + } } } } else { -- cgit v1.2.3 From 2d83109be62edd9647c45d7ed2b916b03974a7ec Mon Sep 17 00:00:00 2001 From: Sarah Sharp Date: Mon, 27 Jul 2009 12:03:40 -0700 Subject: USB: xhci: Correct Event Handler Busy flag usage. The Event Handler Busy bit in the event ring dequeue pointer is write 1 to clear. Fix the interrupt service routine to clear that bit after the event handler has run. xhci_set_hc_event_deq() is designed to update the event ring dequeue pointer without changing any of the four reserved bits in the lower nibble. The event handler busy (EHB) bit is write one to clear, so the new value must always contain a zero in that bit in order to preserve the EHB value. Signed-off-by: Sarah Sharp Signed-off-by: Greg Kroah-Hartman --- drivers/usb/host/xhci-hcd.c | 4 ++-- drivers/usb/host/xhci-ring.c | 6 +++++- 2 files changed, 7 insertions(+), 3 deletions(-) diff --git a/drivers/usb/host/xhci-hcd.c b/drivers/usb/host/xhci-hcd.c index e15773598e4..2e8e5bf6b6c 100644 --- a/drivers/usb/host/xhci-hcd.c +++ b/drivers/usb/host/xhci-hcd.c @@ -249,9 +249,9 @@ static void xhci_work(struct xhci_hcd *xhci) /* FIXME this should be a delayed service routine that clears the EHB */ xhci_handle_event(xhci); - /* Clear the event handler busy flag; the event ring should be empty. */ + /* Clear the event handler busy flag (RW1C); the event ring should be empty. */ temp_64 = xhci_read_64(xhci, &xhci->ir_set->erst_dequeue); - xhci_write_64(xhci, temp_64 & ~ERST_EHB, &xhci->ir_set->erst_dequeue); + xhci_write_64(xhci, temp_64 | ERST_EHB, &xhci->ir_set->erst_dequeue); /* Flush posted writes -- FIXME is this necessary? */ xhci_readl(xhci, &xhci->ir_set->irq_pending); } diff --git a/drivers/usb/host/xhci-ring.c b/drivers/usb/host/xhci-ring.c index 5dd3b1fd71c..fe9541a89a3 100644 --- a/drivers/usb/host/xhci-ring.c +++ b/drivers/usb/host/xhci-ring.c @@ -248,8 +248,12 @@ void xhci_set_hc_event_deq(struct xhci_hcd *xhci) /* Update HC event ring dequeue pointer */ temp = xhci_read_64(xhci, &xhci->ir_set->erst_dequeue); temp &= ERST_PTR_MASK; + /* Don't clear the EHB bit (which is RW1C) because + * there might be more events to service. + */ + temp &= ~ERST_EHB; if (!in_interrupt()) - xhci_dbg(xhci, "// Write event ring dequeue pointer\n"); + xhci_dbg(xhci, "// Write event ring dequeue pointer, preserving EHB bit\n"); xhci_write_64(xhci, ((u64) deq & (u64) ~ERST_PTR_MASK) | temp, &xhci->ir_set->erst_dequeue); } -- cgit v1.2.3 From 66e49d8774fa03539713e8f91169c37c05df1e94 Mon Sep 17 00:00:00 2001 From: Sarah Sharp Date: Mon, 27 Jul 2009 12:03:46 -0700 Subject: USB: xhci: Make debugging more verbose. Add more debugging to the irq handler, slot context initialization, ring operations, URB cancellation, and MMIO writes. Signed-off-by: Sarah Sharp Signed-off-by: Greg Kroah-Hartman --- drivers/usb/host/xhci-hcd.c | 47 +++++++++++++++++++++++++++++++------------- drivers/usb/host/xhci-ring.c | 35 +++++++++++++++++++++++++++++++-- drivers/usb/host/xhci.h | 14 ++++++------- 3 files changed, 72 insertions(+), 24 deletions(-) diff --git a/drivers/usb/host/xhci-hcd.c b/drivers/usb/host/xhci-hcd.c index 2e8e5bf6b6c..764995fd59e 100644 --- a/drivers/usb/host/xhci-hcd.c +++ b/drivers/usb/host/xhci-hcd.c @@ -267,8 +267,10 @@ irqreturn_t xhci_irq(struct usb_hcd *hcd) { struct xhci_hcd *xhci = hcd_to_xhci(hcd); u32 temp, temp2; + union xhci_trb *trb; spin_lock(&xhci->lock); + trb = xhci->event_ring->dequeue; /* Check if the xHC generated the interrupt, or the irq is shared */ temp = xhci_readl(xhci, &xhci->op_regs->status); temp2 = xhci_readl(xhci, &xhci->ir_set->irq_pending); @@ -276,6 +278,15 @@ irqreturn_t xhci_irq(struct usb_hcd *hcd) spin_unlock(&xhci->lock); return IRQ_NONE; } + xhci_dbg(xhci, "op reg status = %08x\n", temp); + xhci_dbg(xhci, "ir set irq_pending = %08x\n", temp2); + xhci_dbg(xhci, "Event ring dequeue ptr:\n"); + xhci_dbg(xhci, "@%llx %08x %08x %08x %08x\n", + (unsigned long long)xhci_trb_virt_to_dma(xhci->event_ring->deq_seg, trb), + lower_32_bits(trb->link.segment_ptr), + upper_32_bits(trb->link.segment_ptr), + (unsigned int) trb->link.intr_target, + (unsigned int) trb->link.control); if (temp & STS_FATAL) { xhci_warn(xhci, "WARNING: Host System Error\n"); @@ -385,6 +396,20 @@ int xhci_run(struct usb_hcd *hcd) add_timer(&xhci->event_ring_timer); #endif + xhci_dbg(xhci, "Command ring memory map follows:\n"); + xhci_debug_ring(xhci, xhci->cmd_ring); + xhci_dbg_ring_ptrs(xhci, xhci->cmd_ring); + xhci_dbg_cmd_ptrs(xhci); + + xhci_dbg(xhci, "ERST memory map follows:\n"); + xhci_dbg_erst(xhci, &xhci->erst); + xhci_dbg(xhci, "Event ring:\n"); + xhci_debug_ring(xhci, xhci->event_ring); + xhci_dbg_ring_ptrs(xhci, xhci->event_ring); + temp_64 = xhci_read_64(xhci, &xhci->ir_set->erst_dequeue); + temp_64 &= ~ERST_PTR_MASK; + xhci_dbg(xhci, "ERST deq = 64'h%0lx\n", (long unsigned int) temp_64); + xhci_dbg(xhci, "// Set the interrupt modulation register\n"); temp = xhci_readl(xhci, &xhci->ir_set->irq_control); temp &= ~ER_IRQ_INTERVAL_MASK; @@ -409,20 +434,6 @@ int xhci_run(struct usb_hcd *hcd) if (NUM_TEST_NOOPS > 0) doorbell = xhci_setup_one_noop(xhci); - xhci_dbg(xhci, "Command ring memory map follows:\n"); - xhci_debug_ring(xhci, xhci->cmd_ring); - xhci_dbg_ring_ptrs(xhci, xhci->cmd_ring); - xhci_dbg_cmd_ptrs(xhci); - - xhci_dbg(xhci, "ERST memory map follows:\n"); - xhci_dbg_erst(xhci, &xhci->erst); - xhci_dbg(xhci, "Event ring:\n"); - xhci_debug_ring(xhci, xhci->event_ring); - xhci_dbg_ring_ptrs(xhci, xhci->event_ring); - temp_64 = xhci_read_64(xhci, &xhci->ir_set->erst_dequeue); - temp_64 &= ~ERST_PTR_MASK; - xhci_dbg(xhci, "ERST deq = 64'h%0lx\n", (long unsigned int) temp_64); - temp = xhci_readl(xhci, &xhci->op_regs->command); temp |= (CMD_RUN); xhci_dbg(xhci, "// Turn on HC, cmd = 0x%x.\n", @@ -665,8 +676,12 @@ int xhci_urb_dequeue(struct usb_hcd *hcd, struct urb *urb, int status) goto done; xhci_dbg(xhci, "Cancel URB %p\n", urb); + xhci_dbg(xhci, "Event ring:\n"); + xhci_debug_ring(xhci, xhci->event_ring); ep_index = xhci_get_endpoint_index(&urb->ep->desc); ep_ring = xhci->devs[urb->dev->slot_id]->ep_rings[ep_index]; + xhci_dbg(xhci, "Endpoint ring:\n"); + xhci_debug_ring(xhci, ep_ring); td = (struct xhci_td *) urb->hcpriv; ep_ring->cancels_pending++; @@ -1178,6 +1193,8 @@ int xhci_address_device(struct usb_hcd *hcd, struct usb_device *udev) if (!udev->config) xhci_setup_addressable_virt_dev(xhci, udev); /* Otherwise, assume the core has the device configured how it wants */ + xhci_dbg(xhci, "Slot ID %d Input Context:\n", udev->slot_id); + xhci_dbg_ctx(xhci, virt_dev->in_ctx, virt_dev->in_ctx_dma, 2); spin_lock_irqsave(&xhci->lock, flags); ret = xhci_queue_address_device(xhci, virt_dev->in_ctx_dma, @@ -1221,6 +1238,8 @@ int xhci_address_device(struct usb_hcd *hcd, struct usb_device *udev) default: xhci_err(xhci, "ERROR: unexpected command completion " "code 0x%x.\n", virt_dev->cmd_status); + xhci_dbg(xhci, "Slot ID %d Output Context:\n", udev->slot_id); + xhci_dbg_ctx(xhci, virt_dev->out_ctx, virt_dev->out_ctx_dma, 2); ret = -EINVAL; break; } diff --git a/drivers/usb/host/xhci-ring.c b/drivers/usb/host/xhci-ring.c index fe9541a89a3..1fc0decfa0a 100644 --- a/drivers/usb/host/xhci-ring.c +++ b/drivers/usb/host/xhci-ring.c @@ -135,6 +135,7 @@ static void next_trb(struct xhci_hcd *xhci, static void inc_deq(struct xhci_hcd *xhci, struct xhci_ring *ring, bool consumer) { union xhci_trb *next = ++(ring->dequeue); + unsigned long long addr; ring->deq_updates++; /* Update the dequeue pointer further if that was a link TRB or we're at @@ -152,6 +153,13 @@ static void inc_deq(struct xhci_hcd *xhci, struct xhci_ring *ring, bool consumer ring->dequeue = ring->deq_seg->trbs; next = ring->dequeue; } + addr = (unsigned long long) xhci_trb_virt_to_dma(ring->deq_seg, ring->dequeue); + if (ring == xhci->event_ring) + xhci_dbg(xhci, "Event ring deq = 0x%llx (DMA)\n", addr); + else if (ring == xhci->cmd_ring) + xhci_dbg(xhci, "Command ring deq = 0x%llx (DMA)\n", addr); + else + xhci_dbg(xhci, "Ring deq = 0x%llx (DMA)\n", addr); } /* @@ -171,6 +179,7 @@ static void inc_enq(struct xhci_hcd *xhci, struct xhci_ring *ring, bool consumer { u32 chain; union xhci_trb *next; + unsigned long long addr; chain = ring->enqueue->generic.field[3] & TRB_CHAIN; next = ++(ring->enqueue); @@ -204,6 +213,13 @@ static void inc_enq(struct xhci_hcd *xhci, struct xhci_ring *ring, bool consumer ring->enqueue = ring->enq_seg->trbs; next = ring->enqueue; } + addr = (unsigned long long) xhci_trb_virt_to_dma(ring->enq_seg, ring->enqueue); + if (ring == xhci->event_ring) + xhci_dbg(xhci, "Event ring enq = 0x%llx (DMA)\n", addr); + else if (ring == xhci->cmd_ring) + xhci_dbg(xhci, "Command ring enq = 0x%llx (DMA)\n", addr); + else + xhci_dbg(xhci, "Ring enq = 0x%llx (DMA)\n", addr); } /* @@ -252,8 +268,7 @@ void xhci_set_hc_event_deq(struct xhci_hcd *xhci) * there might be more events to service. */ temp &= ~ERST_EHB; - if (!in_interrupt()) - xhci_dbg(xhci, "// Write event ring dequeue pointer, preserving EHB bit\n"); + xhci_dbg(xhci, "// Write event ring dequeue pointer, preserving EHB bit\n"); xhci_write_64(xhci, ((u64) deq & (u64) ~ERST_PTR_MASK) | temp, &xhci->ir_set->erst_dequeue); } @@ -781,6 +796,7 @@ static int handle_tx_event(struct xhci_hcd *xhci, struct urb *urb = 0; int status = -EINPROGRESS; + xhci_dbg(xhci, "In %s\n", __func__); xdev = xhci->devs[TRB_TO_SLOT_ID(event->flags)]; if (!xdev) { xhci_err(xhci, "ERROR Transfer event pointed to bad slot\n"); @@ -789,6 +805,7 @@ static int handle_tx_event(struct xhci_hcd *xhci, /* Endpoint ID is 1 based, our index is zero based */ ep_index = TRB_TO_EP_ID(event->flags) - 1; + xhci_dbg(xhci, "%s - ep index = %d\n", __func__, ep_index); ep_ring = xdev->ep_rings[ep_index]; if (!ep_ring || (xdev->out_ctx->ep[ep_index].ep_info & EP_STATE_MASK) == EP_STATE_DISABLED) { xhci_err(xhci, "ERROR Transfer event pointed to disabled endpoint\n"); @@ -797,6 +814,7 @@ static int handle_tx_event(struct xhci_hcd *xhci, event_dma = event->buffer; /* This TRB should be in the TD at the head of this ring's TD list */ + xhci_dbg(xhci, "%s - checking for list empty\n", __func__); if (list_empty(&ep_ring->td_list)) { xhci_warn(xhci, "WARN Event TRB for slot %d ep %d with no TDs queued?\n", TRB_TO_SLOT_ID(event->flags), ep_index); @@ -806,11 +824,14 @@ static int handle_tx_event(struct xhci_hcd *xhci, urb = NULL; goto cleanup; } + xhci_dbg(xhci, "%s - getting list entry\n", __func__); td = list_entry(ep_ring->td_list.next, struct xhci_td, td_list); /* Is this a TRB in the currently executing TD? */ + xhci_dbg(xhci, "%s - looking for TD\n", __func__); event_seg = trb_in_td(ep_ring->deq_seg, ep_ring->dequeue, td->last_trb, event_dma); + xhci_dbg(xhci, "%s - found event_seg = %p\n", __func__, event_seg); if (!event_seg) { /* HC is busted, give up! */ xhci_err(xhci, "ERROR Transfer event TRB DMA ptr not part of current TD\n"); @@ -1027,6 +1048,8 @@ cleanup: /* FIXME for multi-TD URBs (who have buffers bigger than 64MB) */ if (urb) { usb_hcd_unlink_urb_from_ep(xhci_to_hcd(xhci), urb); + xhci_dbg(xhci, "Giveback URB %p, len = %d, status = %d\n", + urb, td->urb->actual_length, status); spin_unlock(&xhci->lock); usb_hcd_giveback_urb(xhci_to_hcd(xhci), urb, status); spin_lock(&xhci->lock); @@ -1044,6 +1067,7 @@ void xhci_handle_event(struct xhci_hcd *xhci) int update_ptrs = 1; int ret; + xhci_dbg(xhci, "In %s\n", __func__); if (!xhci->event_ring || !xhci->event_ring->dequeue) { xhci->error_bitmask |= 1 << 1; return; @@ -1056,18 +1080,25 @@ void xhci_handle_event(struct xhci_hcd *xhci) xhci->error_bitmask |= 1 << 2; return; } + xhci_dbg(xhci, "%s - OS owns TRB\n", __func__); /* FIXME: Handle more event types. */ switch ((event->event_cmd.flags & TRB_TYPE_BITMASK)) { case TRB_TYPE(TRB_COMPLETION): + xhci_dbg(xhci, "%s - calling handle_cmd_completion\n", __func__); handle_cmd_completion(xhci, &event->event_cmd); + xhci_dbg(xhci, "%s - returned from handle_cmd_completion\n", __func__); break; case TRB_TYPE(TRB_PORT_STATUS): + xhci_dbg(xhci, "%s - calling handle_port_status\n", __func__); handle_port_status(xhci, event); + xhci_dbg(xhci, "%s - returned from handle_port_status\n", __func__); update_ptrs = 0; break; case TRB_TYPE(TRB_TRANSFER): + xhci_dbg(xhci, "%s - calling handle_tx_event\n", __func__); ret = handle_tx_event(xhci, &event->trans_event); + xhci_dbg(xhci, "%s - returned from handle_tx_event\n", __func__); if (ret < 0) xhci->error_bitmask |= 1 << 9; else diff --git a/drivers/usb/host/xhci.h b/drivers/usb/host/xhci.h index 60770c89132..074728e1022 100644 --- a/drivers/usb/host/xhci.h +++ b/drivers/usb/host/xhci.h @@ -1065,10 +1065,9 @@ static inline unsigned int xhci_readl(const struct xhci_hcd *xhci, static inline void xhci_writel(struct xhci_hcd *xhci, const unsigned int val, __u32 __iomem *regs) { - if (!in_interrupt()) - xhci_dbg(xhci, - "`MEM_WRITE_DWORD(3'b000, 32'h%p, 32'h%0x, 4'hf);\n", - regs, val); + xhci_dbg(xhci, + "`MEM_WRITE_DWORD(3'b000, 32'h%p, 32'h%0x, 4'hf);\n", + regs, val); writel(val, regs); } @@ -1096,10 +1095,9 @@ static inline void xhci_write_64(struct xhci_hcd *xhci, u32 val_lo = lower_32_bits(val); u32 val_hi = upper_32_bits(val); - if (!in_interrupt()) - xhci_dbg(xhci, - "`MEM_WRITE_DWORD(3'b000, 64'h%p, 64'h%0lx, 4'hf);\n", - regs, (long unsigned int) val); + xhci_dbg(xhci, + "`MEM_WRITE_DWORD(3'b000, 64'h%p, 64'h%0lx, 4'hf);\n", + regs, (long unsigned int) val); writel(val_lo, ptr); writel(val_hi, ptr + 1); } -- cgit v1.2.3 From d3512f63494678dc58e44a20c56278718fd58969 Mon Sep 17 00:00:00 2001 From: Sarah Sharp Date: Mon, 27 Jul 2009 12:03:50 -0700 Subject: USB: xhci: Don't oops if the host doesn't halt. Signed-off-by: Sarah Sharp Signed-off-by: Greg Kroah-Hartman --- drivers/usb/host/xhci-hcd.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) diff --git a/drivers/usb/host/xhci-hcd.c b/drivers/usb/host/xhci-hcd.c index 764995fd59e..8c3a074a95c 100644 --- a/drivers/usb/host/xhci-hcd.c +++ b/drivers/usb/host/xhci-hcd.c @@ -103,7 +103,10 @@ int xhci_reset(struct xhci_hcd *xhci) u32 state; state = xhci_readl(xhci, &xhci->op_regs->status); - BUG_ON((state & STS_HALT) == 0); + if ((state & STS_HALT) == 0) { + xhci_warn(xhci, "Host controller not halted, aborting reset.\n"); + return 0; + } xhci_dbg(xhci, "// Reset the HC\n"); command = xhci_readl(xhci, &xhci->op_regs->command); -- cgit v1.2.3 From fcf8f576beafb8c5db8aee8a73eb73763fa7b0ad Mon Sep 17 00:00:00 2001 From: Sarah Sharp Date: Mon, 27 Jul 2009 12:04:01 -0700 Subject: USB: xhci: Check if the host controller died in IRQ handler. Signed-off-by: Sarah Sharp Signed-off-by: Greg Kroah-Hartman --- drivers/usb/host/xhci-hcd.c | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/drivers/usb/host/xhci-hcd.c b/drivers/usb/host/xhci-hcd.c index 8c3a074a95c..008326d5bc5 100644 --- a/drivers/usb/host/xhci-hcd.c +++ b/drivers/usb/host/xhci-hcd.c @@ -277,6 +277,9 @@ irqreturn_t xhci_irq(struct usb_hcd *hcd) /* Check if the xHC generated the interrupt, or the irq is shared */ temp = xhci_readl(xhci, &xhci->op_regs->status); temp2 = xhci_readl(xhci, &xhci->ir_set->irq_pending); + if (temp == 0xffffffff && temp2 == 0xffffffff) + goto hw_died; + if (!(temp & STS_EINT) && !ER_IRQ_PENDING(temp2)) { spin_unlock(&xhci->lock); return IRQ_NONE; @@ -294,6 +297,7 @@ irqreturn_t xhci_irq(struct usb_hcd *hcd) if (temp & STS_FATAL) { xhci_warn(xhci, "WARNING: Host System Error\n"); xhci_halt(xhci); +hw_died: xhci_to_hcd(xhci)->state = HC_STATE_HALT; spin_unlock(&xhci->lock); return -ESHUTDOWN; -- cgit v1.2.3 From 47692d179f7a88794bcd302e53ca7899d7592db9 Mon Sep 17 00:00:00 2001 From: Sarah Sharp Date: Mon, 27 Jul 2009 12:04:27 -0700 Subject: USB: xhci: Setup HW retries correctly. The xHCI host controller can be programmed to retry a transfer a certain number of times per endpoint before it passes back an error condition to the host controller driver. The xHC will return an error code when the error count transitions from 1 to 0. Programming an error count of 3 means the xHC tries the transfer 3 times, programming it with a 1 means it tries to transfer once, and programming it with 0 means the HW tries the transfer infinitely. We want isochronous transfers to only be tried once, so set the error count to one. Signed-off-by: Sarah Sharp Signed-off-by: Greg Kroah-Hartman --- drivers/usb/host/xhci-mem.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) diff --git a/drivers/usb/host/xhci-mem.c b/drivers/usb/host/xhci-mem.c index ec825f16dce..075e1036bcb 100644 --- a/drivers/usb/host/xhci-mem.c +++ b/drivers/usb/host/xhci-mem.c @@ -480,11 +480,13 @@ int xhci_endpoint_init(struct xhci_hcd *xhci, /* FIXME dig Mult and streams info out of ep companion desc */ - /* Allow 3 retries for everything but isoc */ + /* Allow 3 retries for everything but isoc; + * error count = 0 means infinite retries. + */ if (!usb_endpoint_xfer_isoc(&ep->desc)) ep_ctx->ep_info2 = ERROR_COUNT(3); else - ep_ctx->ep_info2 = ERROR_COUNT(0); + ep_ctx->ep_info2 = ERROR_COUNT(1); ep_ctx->ep_info2 |= xhci_get_endpoint_type(udev, ep); -- cgit v1.2.3 From 4a73143ced467868e92d7914d9f8bf797640927b Mon Sep 17 00:00:00 2001 From: Sarah Sharp Date: Mon, 27 Jul 2009 12:04:32 -0700 Subject: USB: xhci: Handle babble errors on transfers. Pass back a babble error when this error code is seen in the transfer event TRB. Signed-off-by: Sarah Sharp Signed-off-by: Greg Kroah-Hartman --- drivers/usb/host/xhci-ring.c | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/drivers/usb/host/xhci-ring.c b/drivers/usb/host/xhci-ring.c index 1fc0decfa0a..0903e98989e 100644 --- a/drivers/usb/host/xhci-ring.c +++ b/drivers/usb/host/xhci-ring.c @@ -876,6 +876,10 @@ static int handle_tx_event(struct xhci_hcd *xhci, xhci_warn(xhci, "WARN: transfer error on endpoint\n"); status = -EPROTO; break; + case COMP_BABBLE: + xhci_warn(xhci, "WARN: babble error on endpoint\n"); + status = -EOVERFLOW; + break; case COMP_DB_ERR: xhci_warn(xhci, "WARN: HC couldn't access mem fast enough\n"); status = -ENOSR; -- cgit v1.2.3 From b7d6d99896a6cf38dc354d673afd3fbde10b86c2 Mon Sep 17 00:00:00 2001 From: Sarah Sharp Date: Mon, 27 Jul 2009 12:04:38 -0700 Subject: USB: xhci: Fail gracefully if there's no SS ep companion descriptor. This is a work around for a bug in the SuperSpeed Endpoint Companion Descriptor parsing code. It fails in some corner cases, which means ep->ss_ep_comp may be NULL. Signed-off-by: Sarah Sharp Signed-off-by: Greg Kroah-Hartman --- drivers/usb/host/xhci-mem.c | 7 ++++++- 1 file changed, 6 insertions(+), 1 deletion(-) diff --git a/drivers/usb/host/xhci-mem.c b/drivers/usb/host/xhci-mem.c index 075e1036bcb..41aca003ee8 100644 --- a/drivers/usb/host/xhci-mem.c +++ b/drivers/usb/host/xhci-mem.c @@ -496,7 +496,12 @@ int xhci_endpoint_init(struct xhci_hcd *xhci, max_packet = ep->desc.wMaxPacketSize; ep_ctx->ep_info2 |= MAX_PACKET(max_packet); /* dig out max burst from ep companion desc */ - max_packet = ep->ss_ep_comp->desc.bMaxBurst; + if (!ep->ss_ep_comp) { + xhci_warn(xhci, "WARN no SS endpoint companion descriptor.\n"); + max_packet = 0; + } else { + max_packet = ep->ss_ep_comp->desc.bMaxBurst; + } ep_ctx->ep_info2 |= MAX_BURST(max_packet); break; case USB_SPEED_HIGH: -- cgit v1.2.3 From 9f8e443816976edd68f415ea25c0223ea921e88c Mon Sep 17 00:00:00 2001 From: Sarah Sharp Date: Mon, 27 Jul 2009 12:04:52 -0700 Subject: USB: Fix parsing of SuperSpeed Endpoint Companion descriptor. usb_parse_ss_endpoint_companion() was supposed to allocate a structure to hold the SuperSpeed Endpoint Companion descriptor, and either copy the values the device returned, or fill in default values if the device descriptor did not include the companion descriptor. However, the previous code would miss the last endpoint in a configuration with no descriptors after it. Make usb_parse_endpoint() allocate the SS endpoint companion descriptor and fill it with default values, even if we've run out of buffer space in this configuration descriptor. Signed-off-by: Sarah Sharp Signed-off-by: Greg Kroah-Hartman --- drivers/usb/core/config.c | 48 ++++++++++++++++++++++++++--------------------- 1 file changed, 27 insertions(+), 21 deletions(-) diff --git a/drivers/usb/core/config.c b/drivers/usb/core/config.c index 24dfb33f90c..a16c538d013 100644 --- a/drivers/usb/core/config.c +++ b/drivers/usb/core/config.c @@ -80,38 +80,18 @@ static int usb_parse_ss_endpoint_companion(struct device *ddev, int cfgno, int max_tx; int i; - /* Allocate space for the SS endpoint companion descriptor */ - ep->ss_ep_comp = kzalloc(sizeof(struct usb_host_ss_ep_comp), - GFP_KERNEL); - if (!ep->ss_ep_comp) - return -ENOMEM; desc = (struct usb_ss_ep_comp_descriptor *) buffer; if (desc->bDescriptorType != USB_DT_SS_ENDPOINT_COMP) { dev_warn(ddev, "No SuperSpeed endpoint companion for config %d " " interface %d altsetting %d ep %d: " "using minimum values\n", cfgno, inum, asnum, ep->desc.bEndpointAddress); - ep->ss_ep_comp->desc.bLength = USB_DT_SS_EP_COMP_SIZE; - ep->ss_ep_comp->desc.bDescriptorType = USB_DT_SS_ENDPOINT_COMP; - ep->ss_ep_comp->desc.bMaxBurst = 0; - /* - * Leave bmAttributes as zero, which will mean no streams for - * bulk, and isoc won't support multiple bursts of packets. - * With bursts of only one packet, and a Mult of 1, the max - * amount of data moved per endpoint service interval is one - * packet. - */ - if (usb_endpoint_xfer_isoc(&ep->desc) || - usb_endpoint_xfer_int(&ep->desc)) - ep->ss_ep_comp->desc.wBytesPerInterval = - ep->desc.wMaxPacketSize; /* * The next descriptor is for an Endpoint or Interface, * no extra descriptors to copy into the companion structure, * and we didn't eat up any of the buffer. */ - retval = 0; - goto valid; + return 0; } memcpy(&ep->ss_ep_comp->desc, desc, USB_DT_SS_EP_COMP_SIZE); desc = &ep->ss_ep_comp->desc; @@ -320,6 +300,28 @@ static int usb_parse_endpoint(struct device *ddev, int cfgno, int inum, buffer += i; size -= i; + /* Allocate space for the SS endpoint companion descriptor */ + endpoint->ss_ep_comp = kzalloc(sizeof(struct usb_host_ss_ep_comp), + GFP_KERNEL); + if (!endpoint->ss_ep_comp) + return -ENOMEM; + + /* Fill in some default values (may be overwritten later) */ + endpoint->ss_ep_comp->desc.bLength = USB_DT_SS_EP_COMP_SIZE; + endpoint->ss_ep_comp->desc.bDescriptorType = USB_DT_SS_ENDPOINT_COMP; + endpoint->ss_ep_comp->desc.bMaxBurst = 0; + /* + * Leave bmAttributes as zero, which will mean no streams for + * bulk, and isoc won't support multiple bursts of packets. + * With bursts of only one packet, and a Mult of 1, the max + * amount of data moved per endpoint service interval is one + * packet. + */ + if (usb_endpoint_xfer_isoc(&endpoint->desc) || + usb_endpoint_xfer_int(&endpoint->desc)) + endpoint->ss_ep_comp->desc.wBytesPerInterval = + endpoint->desc.wMaxPacketSize; + if (size > 0) { retval = usb_parse_ss_endpoint_companion(ddev, cfgno, inum, asnum, endpoint, num_ep, buffer, @@ -329,6 +331,10 @@ static int usb_parse_endpoint(struct device *ddev, int cfgno, int inum, retval = buffer - buffer0; } } else { + dev_warn(ddev, "config %d interface %d altsetting %d " + "endpoint 0x%X has no " + "SuperSpeed companion descriptor\n", + cfgno, inum, asnum, d->bEndpointAddress); retval = buffer - buffer0; } } else { -- cgit v1.2.3 From 254c80a3a0eb811489f7410c3291f01a60e8e42f Mon Sep 17 00:00:00 2001 From: John Youn Date: Mon, 27 Jul 2009 12:05:03 -0700 Subject: USB: xhci: Scratchpad buffer allocation Allocates and initializes the scratchpad buffer array (XHCI 4.20). This is an array of 64-bit DMA addresses to scratch pages that the controller may use during operation. The number of pages is specified in the "Max Scratchpad Buffers" field of HCSPARAMS2. The DMA address of this array is written into slot 0 of the DCBAA. Signed-off-by: John Youn Acked-by: Sarah Sharp Signed-off-by: Greg Kroah-Hartman --- drivers/usb/host/xhci-mem.c | 102 ++++++++++++++++++++++++++++++++++++++++++++ drivers/usb/host/xhci.h | 11 +++++ 2 files changed, 113 insertions(+) diff --git a/drivers/usb/host/xhci-mem.c b/drivers/usb/host/xhci-mem.c index 41aca003ee8..71121d99235 100644 --- a/drivers/usb/host/xhci-mem.c +++ b/drivers/usb/host/xhci-mem.c @@ -545,6 +545,103 @@ void xhci_endpoint_zero(struct xhci_hcd *xhci, */ } +/* Set up the scratchpad buffer array and scratchpad buffers, if needed. */ +static int scratchpad_alloc(struct xhci_hcd *xhci, gfp_t flags) +{ + int i; + struct device *dev = xhci_to_hcd(xhci)->self.controller; + int num_sp = HCS_MAX_SCRATCHPAD(xhci->hcs_params2); + + xhci_dbg(xhci, "Allocating %d scratchpad buffers\n", num_sp); + + if (!num_sp) + return 0; + + xhci->scratchpad = kzalloc(sizeof(*xhci->scratchpad), flags); + if (!xhci->scratchpad) + goto fail_sp; + + xhci->scratchpad->sp_array = + pci_alloc_consistent(to_pci_dev(dev), + num_sp * sizeof(u64), + &xhci->scratchpad->sp_dma); + if (!xhci->scratchpad->sp_array) + goto fail_sp2; + + xhci->scratchpad->sp_buffers = kzalloc(sizeof(void *) * num_sp, flags); + if (!xhci->scratchpad->sp_buffers) + goto fail_sp3; + + xhci->scratchpad->sp_dma_buffers = + kzalloc(sizeof(dma_addr_t) * num_sp, flags); + + if (!xhci->scratchpad->sp_dma_buffers) + goto fail_sp4; + + xhci->dcbaa->dev_context_ptrs[0] = xhci->scratchpad->sp_dma; + for (i = 0; i < num_sp; i++) { + dma_addr_t dma; + void *buf = pci_alloc_consistent(to_pci_dev(dev), + xhci->page_size, &dma); + if (!buf) + goto fail_sp5; + + xhci->scratchpad->sp_array[i] = dma; + xhci->scratchpad->sp_buffers[i] = buf; + xhci->scratchpad->sp_dma_buffers[i] = dma; + } + + return 0; + + fail_sp5: + for (i = i - 1; i >= 0; i--) { + pci_free_consistent(to_pci_dev(dev), xhci->page_size, + xhci->scratchpad->sp_buffers[i], + xhci->scratchpad->sp_dma_buffers[i]); + } + kfree(xhci->scratchpad->sp_dma_buffers); + + fail_sp4: + kfree(xhci->scratchpad->sp_buffers); + + fail_sp3: + pci_free_consistent(to_pci_dev(dev), num_sp * sizeof(u64), + xhci->scratchpad->sp_array, + xhci->scratchpad->sp_dma); + + fail_sp2: + kfree(xhci->scratchpad); + xhci->scratchpad = NULL; + + fail_sp: + return -ENOMEM; +} + +static void scratchpad_free(struct xhci_hcd *xhci) +{ + int num_sp; + int i; + struct pci_dev *pdev = to_pci_dev(xhci_to_hcd(xhci)->self.controller); + + if (!xhci->scratchpad) + return; + + num_sp = HCS_MAX_SCRATCHPAD(xhci->hcs_params2); + + for (i = 0; i < num_sp; i++) { + pci_free_consistent(pdev, xhci->page_size, + xhci->scratchpad->sp_buffers[i], + xhci->scratchpad->sp_dma_buffers[i]); + } + kfree(xhci->scratchpad->sp_dma_buffers); + kfree(xhci->scratchpad->sp_buffers); + pci_free_consistent(pdev, num_sp * sizeof(u64), + xhci->scratchpad->sp_array, + xhci->scratchpad->sp_dma); + kfree(xhci->scratchpad); + xhci->scratchpad = NULL; +} + void xhci_mem_cleanup(struct xhci_hcd *xhci) { struct pci_dev *pdev = to_pci_dev(xhci_to_hcd(xhci)->self.controller); @@ -593,6 +690,7 @@ void xhci_mem_cleanup(struct xhci_hcd *xhci) xhci->page_size = 0; xhci->page_shift = 0; + scratchpad_free(xhci); } int xhci_mem_init(struct xhci_hcd *xhci, gfp_t flags) @@ -755,7 +853,11 @@ int xhci_mem_init(struct xhci_hcd *xhci, gfp_t flags) for (i = 0; i < MAX_HC_SLOTS; ++i) xhci->devs[i] = 0; + if (scratchpad_alloc(xhci, flags)) + goto fail; + return 0; + fail: xhci_warn(xhci, "Couldn't initialize memory\n"); xhci_mem_cleanup(xhci); diff --git a/drivers/usb/host/xhci.h b/drivers/usb/host/xhci.h index 074728e1022..5a09b9a26e0 100644 --- a/drivers/usb/host/xhci.h +++ b/drivers/usb/host/xhci.h @@ -89,6 +89,7 @@ struct xhci_cap_regs { #define HCS_ERST_MAX(p) (((p) >> 4) & 0xf) /* bit 26 Scratchpad restore - for save/restore HW state - not used yet */ /* bits 27:31 number of Scratchpad buffers SW must allocate for the HW */ +#define HCS_MAX_SCRATCHPAD(p) (((p) >> 27) & 0x1f) /* HCSPARAMS3 - hcs_params3 - bitmasks */ /* bits 0:7, Max U1 to U0 latency for the roothub ports */ @@ -951,6 +952,13 @@ struct xhci_erst { unsigned int erst_size; }; +struct xhci_scratchpad { + u64 *sp_array; + dma_addr_t sp_dma; + void **sp_buffers; + dma_addr_t *sp_dma_buffers; +}; + /* * Each segment table entry is 4*32bits long. 1K seems like an ok size: * (1K bytes * 8bytes/bit) / (4*32 bits) = 64 segment entries in the table, @@ -1005,6 +1013,9 @@ struct xhci_hcd { struct xhci_ring *cmd_ring; struct xhci_ring *event_ring; struct xhci_erst erst; + /* Scratchpad */ + struct xhci_scratchpad *scratchpad; + /* slot enabling and address device helpers */ struct completion addr_dev; int slot_id; -- cgit v1.2.3 From 28c2d2efb48dec2f0b050affae6d5787d6449e47 Mon Sep 17 00:00:00 2001 From: Sarah Sharp Date: Mon, 27 Jul 2009 12:05:08 -0700 Subject: USB: xhci: Always align output device contexts to 64 bytes. Make sure the xHCI output device context is 64-byte aligned. Previous code was using the same structure for both the output device context and the input control context. Since the structure had 32 bytes of flags before the device context, the output device context wouldn't be 64-byte aligned. Define a new structure to use for the output device context and clean up the debugging for these two structures. The copy of the device context in the input control context does *not* need to be 64-byte aligned. Signed-off-by: Sarah Sharp Signed-off-by: Greg Kroah-Hartman --- drivers/usb/host/xhci-dbg.c | 101 +++++++++++++++++++++++++++----------------- drivers/usb/host/xhci-hcd.c | 7 +-- drivers/usb/host/xhci-mem.c | 15 +++---- drivers/usb/host/xhci.h | 19 ++++++++- 4 files changed, 89 insertions(+), 53 deletions(-) diff --git a/drivers/usb/host/xhci-dbg.c b/drivers/usb/host/xhci-dbg.c index 6d62e4abe3c..d77f8de1125 100644 --- a/drivers/usb/host/xhci-dbg.c +++ b/drivers/usb/host/xhci-dbg.c @@ -393,78 +393,103 @@ void xhci_dbg_cmd_ptrs(struct xhci_hcd *xhci) upper_32_bits(val)); } -void xhci_dbg_ctx(struct xhci_hcd *xhci, struct xhci_device_control *ctx, dma_addr_t dma, unsigned int last_ep) +dma_addr_t xhci_dbg_slot_ctx(struct xhci_hcd *xhci, struct xhci_slot_ctx *slot, dma_addr_t dma) { - int i, j; - int last_ep_ctx = 31; /* Fields are 32 bits wide, DMA addresses are in bytes */ int field_size = 32 / 8; - - xhci_dbg(xhci, "@%p (virt) @%08llx (dma) %#08x - drop flags\n", - &ctx->drop_flags, (unsigned long long)dma, - ctx->drop_flags); - dma += field_size; - xhci_dbg(xhci, "@%p (virt) @%08llx (dma) %#08x - add flags\n", - &ctx->add_flags, (unsigned long long)dma, - ctx->add_flags); - dma += field_size; - for (i = 0; i < 6; ++i) { - xhci_dbg(xhci, "@%p (virt) @%08llx (dma) %#08x - rsvd[%d]\n", - &ctx->rsvd[i], (unsigned long long)dma, - ctx->rsvd[i], i); - dma += field_size; - } + int i; xhci_dbg(xhci, "Slot Context:\n"); xhci_dbg(xhci, "@%p (virt) @%08llx (dma) %#08x - dev_info\n", - &ctx->slot.dev_info, - (unsigned long long)dma, ctx->slot.dev_info); + &slot->dev_info, + (unsigned long long)dma, slot->dev_info); dma += field_size; xhci_dbg(xhci, "@%p (virt) @%08llx (dma) %#08x - dev_info2\n", - &ctx->slot.dev_info2, - (unsigned long long)dma, ctx->slot.dev_info2); + &slot->dev_info2, + (unsigned long long)dma, slot->dev_info2); dma += field_size; xhci_dbg(xhci, "@%p (virt) @%08llx (dma) %#08x - tt_info\n", - &ctx->slot.tt_info, - (unsigned long long)dma, ctx->slot.tt_info); + &slot->tt_info, + (unsigned long long)dma, slot->tt_info); dma += field_size; xhci_dbg(xhci, "@%p (virt) @%08llx (dma) %#08x - dev_state\n", - &ctx->slot.dev_state, - (unsigned long long)dma, ctx->slot.dev_state); + &slot->dev_state, + (unsigned long long)dma, slot->dev_state); dma += field_size; for (i = 0; i < 4; ++i) { xhci_dbg(xhci, "@%p (virt) @%08llx (dma) %#08x - rsvd[%d]\n", - &ctx->slot.reserved[i], (unsigned long long)dma, - ctx->slot.reserved[i], i); + &slot->reserved[i], (unsigned long long)dma, + slot->reserved[i], i); dma += field_size; } + return dma; +} + +dma_addr_t xhci_dbg_ep_ctx(struct xhci_hcd *xhci, struct xhci_ep_ctx *ep, dma_addr_t dma, unsigned int last_ep) +{ + int i, j; + int last_ep_ctx = 31; + /* Fields are 32 bits wide, DMA addresses are in bytes */ + int field_size = 32 / 8; + if (last_ep < 31) last_ep_ctx = last_ep + 1; for (i = 0; i < last_ep_ctx; ++i) { xhci_dbg(xhci, "Endpoint %02d Context:\n", i); xhci_dbg(xhci, "@%p (virt) @%08llx (dma) %#08x - ep_info\n", - &ctx->ep[i].ep_info, - (unsigned long long)dma, ctx->ep[i].ep_info); + &ep[i].ep_info, + (unsigned long long)dma, ep[i].ep_info); dma += field_size; xhci_dbg(xhci, "@%p (virt) @%08llx (dma) %#08x - ep_info2\n", - &ctx->ep[i].ep_info2, - (unsigned long long)dma, ctx->ep[i].ep_info2); + &ep[i].ep_info2, + (unsigned long long)dma, ep[i].ep_info2); dma += field_size; xhci_dbg(xhci, "@%p (virt) @%08llx (dma) %#08llx - deq\n", - &ctx->ep[i].deq, - (unsigned long long)dma, ctx->ep[i].deq); + &ep[i].deq, + (unsigned long long)dma, ep[i].deq); dma += 2*field_size; xhci_dbg(xhci, "@%p (virt) @%08llx (dma) %#08x - tx_info\n", - &ctx->ep[i].tx_info, - (unsigned long long)dma, ctx->ep[i].tx_info); + &ep[i].tx_info, + (unsigned long long)dma, ep[i].tx_info); dma += field_size; for (j = 0; j < 3; ++j) { xhci_dbg(xhci, "@%p (virt) @%08llx (dma) %#08x - rsvd[%d]\n", - &ctx->ep[i].reserved[j], + &ep[i].reserved[j], (unsigned long long)dma, - ctx->ep[i].reserved[j], j); + ep[i].reserved[j], j); dma += field_size; } } + return dma; +} + +void xhci_dbg_ctx(struct xhci_hcd *xhci, struct xhci_device_control *ctx, dma_addr_t dma, unsigned int last_ep) +{ + int i; + /* Fields are 32 bits wide, DMA addresses are in bytes */ + int field_size = 32 / 8; + + xhci_dbg(xhci, "@%p (virt) @%08llx (dma) %#08x - drop flags\n", + &ctx->drop_flags, (unsigned long long)dma, + ctx->drop_flags); + dma += field_size; + xhci_dbg(xhci, "@%p (virt) @%08llx (dma) %#08x - add flags\n", + &ctx->add_flags, (unsigned long long)dma, + ctx->add_flags); + dma += field_size; + for (i = 0; i < 6; ++i) { + xhci_dbg(xhci, "@%p (virt) @%08llx (dma) %#08x - rsvd[%d]\n", + &ctx->rsvd[i], (unsigned long long)dma, + ctx->rsvd[i], i); + dma += field_size; + } + dma = xhci_dbg_slot_ctx(xhci, &ctx->slot, dma); + dma = xhci_dbg_ep_ctx(xhci, ctx->ep, dma, last_ep); +} + +void xhci_dbg_device_ctx(struct xhci_hcd *xhci, struct xhci_device_ctx *ctx, dma_addr_t dma, unsigned int last_ep) +{ + dma = xhci_dbg_slot_ctx(xhci, &ctx->slot, dma); + dma = xhci_dbg_ep_ctx(xhci, ctx->ep, dma, last_ep); } diff --git a/drivers/usb/host/xhci-hcd.c b/drivers/usb/host/xhci-hcd.c index 008326d5bc5..921dd173d79 100644 --- a/drivers/usb/host/xhci-hcd.c +++ b/drivers/usb/host/xhci-hcd.c @@ -1013,7 +1013,7 @@ int xhci_check_bandwidth(struct usb_hcd *hcd, struct usb_device *udev) } xhci_dbg(xhci, "Output context after successful config ep cmd:\n"); - xhci_dbg_ctx(xhci, virt_dev->out_ctx, virt_dev->out_ctx_dma, + xhci_dbg_device_ctx(xhci, virt_dev->out_ctx, virt_dev->out_ctx_dma, LAST_CTX_TO_EP_NUM(virt_dev->in_ctx->slot.dev_info)); xhci_zero_in_ctx(virt_dev); @@ -1265,7 +1265,7 @@ int xhci_address_device(struct usb_hcd *hcd, struct usb_device *udev) xhci_dbg(xhci, "Slot ID %d Input Context:\n", udev->slot_id); xhci_dbg_ctx(xhci, virt_dev->in_ctx, virt_dev->in_ctx_dma, 2); xhci_dbg(xhci, "Slot ID %d Output Context:\n", udev->slot_id); - xhci_dbg_ctx(xhci, virt_dev->out_ctx, virt_dev->out_ctx_dma, 2); + xhci_dbg_device_ctx(xhci, virt_dev->out_ctx, virt_dev->out_ctx_dma, 2); /* * USB core uses address 1 for the roothubs, so we add one to the * address given back to us by the HC. @@ -1274,9 +1274,6 @@ int xhci_address_device(struct usb_hcd *hcd, struct usb_device *udev) /* Zero the input context control for later use */ virt_dev->in_ctx->add_flags = 0; virt_dev->in_ctx->drop_flags = 0; - /* Mirror flags in the output context for future ep enable/disable */ - virt_dev->out_ctx->add_flags = SLOT_FLAG | EP0_FLAG; - virt_dev->out_ctx->drop_flags = 0; xhci_dbg(xhci, "Device address = %d\n", udev->devnum); /* XXX Meh, not sure if anyone else but choose_address uses this. */ diff --git a/drivers/usb/host/xhci-mem.c b/drivers/usb/host/xhci-mem.c index 71121d99235..8d6bdf2f801 100644 --- a/drivers/usb/host/xhci-mem.c +++ b/drivers/usb/host/xhci-mem.c @@ -235,7 +235,10 @@ int xhci_alloc_virt_device(struct xhci_hcd *xhci, int slot_id, return 0; dev = xhci->devs[slot_id]; - /* Allocate the (output) device context that will be used in the HC */ + /* Allocate the (output) device context that will be used in the HC. + * The structure is 32 bytes smaller than the input context, but that's + * fine. + */ dev->out_ctx = dma_pool_alloc(xhci->device_pool, flags, &dma); if (!dev->out_ctx) goto fail; @@ -260,16 +263,12 @@ int xhci_alloc_virt_device(struct xhci_hcd *xhci, int slot_id, init_completion(&dev->cmd_completion); - /* - * Point to output device context in dcbaa; skip the output control - * context, which is eight 32 bit fields (or 32 bytes long) - */ - xhci->dcbaa->dev_context_ptrs[slot_id] = - (u32) dev->out_ctx_dma + (32); + /* Point to output device context in dcbaa. */ + xhci->dcbaa->dev_context_ptrs[slot_id] = dev->out_ctx_dma; xhci_dbg(xhci, "Set slot id %d dcbaa entry %p to 0x%llx\n", slot_id, &xhci->dcbaa->dev_context_ptrs[slot_id], - (unsigned long long)dev->out_ctx_dma); + (unsigned long long) xhci->dcbaa->dev_context_ptrs[slot_id]); return 1; fail: diff --git a/drivers/usb/host/xhci.h b/drivers/usb/host/xhci.h index 5a09b9a26e0..d4d3c7777fb 100644 --- a/drivers/usb/host/xhci.h +++ b/drivers/usb/host/xhci.h @@ -584,15 +584,29 @@ struct xhci_ep_ctx { /** * struct xhci_device_control - * Input/Output context; see section 6.2.5. + * Input context; see section 6.2.5. * * @drop_context: set the bit of the endpoint context you want to disable * @add_context: set the bit of the endpoint context you want to enable */ struct xhci_device_control { + /* Input control context */ u32 drop_flags; u32 add_flags; u32 rsvd[6]; + /* Copy of device context */ + struct xhci_slot_ctx slot; + struct xhci_ep_ctx ep[31]; +}; + +/** + * struct xhci_device_ctx + * Device context; see section 6.2.1. + * + * @slot: slot context for the device. + * @ep: array of endpoint contexts for the device. + */ +struct xhci_device_ctx { struct xhci_slot_ctx slot; struct xhci_ep_ctx ep[31]; }; @@ -612,7 +626,7 @@ struct xhci_virt_device { * track of input and output contexts separately because * these commands might fail and we don't trust the hardware. */ - struct xhci_device_control *out_ctx; + struct xhci_device_ctx *out_ctx; dma_addr_t out_ctx_dma; /* Used for addressing devices and configuration changes */ struct xhci_device_control *in_ctx; @@ -1126,6 +1140,7 @@ void xhci_dbg_erst(struct xhci_hcd *xhci, struct xhci_erst *erst); void xhci_dbg_cmd_ptrs(struct xhci_hcd *xhci); void xhci_dbg_ring_ptrs(struct xhci_hcd *xhci, struct xhci_ring *ring); void xhci_dbg_ctx(struct xhci_hcd *xhci, struct xhci_device_control *ctx, dma_addr_t dma, unsigned int last_ep); +void xhci_dbg_device_ctx(struct xhci_hcd *xhci, struct xhci_device_ctx *ctx, dma_addr_t dma, unsigned int last_ep); /* xHCI memory managment */ void xhci_mem_cleanup(struct xhci_hcd *xhci); -- cgit v1.2.3 From d115b04818e57bdbc7ccde4d0660b15e33013dc8 Mon Sep 17 00:00:00 2001 From: John Youn Date: Mon, 27 Jul 2009 12:05:15 -0700 Subject: USB: xhci: Support for 64-byte contexts Adds support for controllers that use 64-byte contexts. The following context data structures are affected by this: Device, Input, Input Control, Endpoint, and Slot. To accommodate the use of either 32 or 64-byte contexts, a Device or Input context can only be accessed through functions which look-up and return pointers to their contained contexts. Signed-off-by: John Youn Acked-by: Sarah Sharp Signed-off-by: Greg Kroah-Hartman --- drivers/usb/host/xhci-dbg.c | 125 +++++++++++++++++++++++++++---------------- drivers/usb/host/xhci-hcd.c | 121 ++++++++++++++++++++++++----------------- drivers/usb/host/xhci-mem.c | 121 +++++++++++++++++++++++++++++------------ drivers/usb/host/xhci-ring.c | 22 +++++--- drivers/usb/host/xhci.h | 61 +++++++++++---------- 5 files changed, 287 insertions(+), 163 deletions(-) diff --git a/drivers/usb/host/xhci-dbg.c b/drivers/usb/host/xhci-dbg.c index d77f8de1125..705e3432415 100644 --- a/drivers/usb/host/xhci-dbg.c +++ b/drivers/usb/host/xhci-dbg.c @@ -393,103 +393,138 @@ void xhci_dbg_cmd_ptrs(struct xhci_hcd *xhci) upper_32_bits(val)); } -dma_addr_t xhci_dbg_slot_ctx(struct xhci_hcd *xhci, struct xhci_slot_ctx *slot, dma_addr_t dma) +/* Print the last 32 bytes for 64-byte contexts */ +static void dbg_rsvd64(struct xhci_hcd *xhci, u64 *ctx, dma_addr_t dma) +{ + int i; + for (i = 0; i < 4; ++i) { + xhci_dbg(xhci, "@%p (virt) @%08llx " + "(dma) %#08llx - rsvd64[%d]\n", + &ctx[4 + i], (unsigned long long)dma, + ctx[4 + i], i); + dma += 8; + } +} + +void xhci_dbg_slot_ctx(struct xhci_hcd *xhci, struct xhci_container_ctx *ctx) { /* Fields are 32 bits wide, DMA addresses are in bytes */ int field_size = 32 / 8; int i; + struct xhci_slot_ctx *slot_ctx = xhci_get_slot_ctx(xhci, ctx); + dma_addr_t dma = ctx->dma + ((unsigned long)slot_ctx - (unsigned long)ctx); + int csz = HCC_64BYTE_CONTEXT(xhci->hcc_params); + xhci_dbg(xhci, "Slot Context:\n"); xhci_dbg(xhci, "@%p (virt) @%08llx (dma) %#08x - dev_info\n", - &slot->dev_info, - (unsigned long long)dma, slot->dev_info); + &slot_ctx->dev_info, + (unsigned long long)dma, slot_ctx->dev_info); dma += field_size; xhci_dbg(xhci, "@%p (virt) @%08llx (dma) %#08x - dev_info2\n", - &slot->dev_info2, - (unsigned long long)dma, slot->dev_info2); + &slot_ctx->dev_info2, + (unsigned long long)dma, slot_ctx->dev_info2); dma += field_size; xhci_dbg(xhci, "@%p (virt) @%08llx (dma) %#08x - tt_info\n", - &slot->tt_info, - (unsigned long long)dma, slot->tt_info); + &slot_ctx->tt_info, + (unsigned long long)dma, slot_ctx->tt_info); dma += field_size; xhci_dbg(xhci, "@%p (virt) @%08llx (dma) %#08x - dev_state\n", - &slot->dev_state, - (unsigned long long)dma, slot->dev_state); + &slot_ctx->dev_state, + (unsigned long long)dma, slot_ctx->dev_state); dma += field_size; for (i = 0; i < 4; ++i) { xhci_dbg(xhci, "@%p (virt) @%08llx (dma) %#08x - rsvd[%d]\n", - &slot->reserved[i], (unsigned long long)dma, - slot->reserved[i], i); + &slot_ctx->reserved[i], (unsigned long long)dma, + slot_ctx->reserved[i], i); dma += field_size; } - return dma; + if (csz) + dbg_rsvd64(xhci, (u64 *)slot_ctx, dma); } -dma_addr_t xhci_dbg_ep_ctx(struct xhci_hcd *xhci, struct xhci_ep_ctx *ep, dma_addr_t dma, unsigned int last_ep) +void xhci_dbg_ep_ctx(struct xhci_hcd *xhci, + struct xhci_container_ctx *ctx, + unsigned int last_ep) { int i, j; int last_ep_ctx = 31; /* Fields are 32 bits wide, DMA addresses are in bytes */ int field_size = 32 / 8; + int csz = HCC_64BYTE_CONTEXT(xhci->hcc_params); if (last_ep < 31) last_ep_ctx = last_ep + 1; for (i = 0; i < last_ep_ctx; ++i) { + struct xhci_ep_ctx *ep_ctx = xhci_get_ep_ctx(xhci, ctx, i); + dma_addr_t dma = ctx->dma + + ((unsigned long)ep_ctx - (unsigned long)ctx); + xhci_dbg(xhci, "Endpoint %02d Context:\n", i); xhci_dbg(xhci, "@%p (virt) @%08llx (dma) %#08x - ep_info\n", - &ep[i].ep_info, - (unsigned long long)dma, ep[i].ep_info); + &ep_ctx->ep_info, + (unsigned long long)dma, ep_ctx->ep_info); dma += field_size; xhci_dbg(xhci, "@%p (virt) @%08llx (dma) %#08x - ep_info2\n", - &ep[i].ep_info2, - (unsigned long long)dma, ep[i].ep_info2); + &ep_ctx->ep_info2, + (unsigned long long)dma, ep_ctx->ep_info2); dma += field_size; xhci_dbg(xhci, "@%p (virt) @%08llx (dma) %#08llx - deq\n", - &ep[i].deq, - (unsigned long long)dma, ep[i].deq); + &ep_ctx->deq, + (unsigned long long)dma, ep_ctx->deq); dma += 2*field_size; xhci_dbg(xhci, "@%p (virt) @%08llx (dma) %#08x - tx_info\n", - &ep[i].tx_info, - (unsigned long long)dma, ep[i].tx_info); + &ep_ctx->tx_info, + (unsigned long long)dma, ep_ctx->tx_info); dma += field_size; for (j = 0; j < 3; ++j) { xhci_dbg(xhci, "@%p (virt) @%08llx (dma) %#08x - rsvd[%d]\n", - &ep[i].reserved[j], + &ep_ctx->reserved[j], (unsigned long long)dma, - ep[i].reserved[j], j); + ep_ctx->reserved[j], j); dma += field_size; } + + if (csz) + dbg_rsvd64(xhci, (u64 *)ep_ctx, dma); } - return dma; } -void xhci_dbg_ctx(struct xhci_hcd *xhci, struct xhci_device_control *ctx, dma_addr_t dma, unsigned int last_ep) +void xhci_dbg_ctx(struct xhci_hcd *xhci, + struct xhci_container_ctx *ctx, + unsigned int last_ep) { int i; /* Fields are 32 bits wide, DMA addresses are in bytes */ int field_size = 32 / 8; - - xhci_dbg(xhci, "@%p (virt) @%08llx (dma) %#08x - drop flags\n", - &ctx->drop_flags, (unsigned long long)dma, - ctx->drop_flags); - dma += field_size; - xhci_dbg(xhci, "@%p (virt) @%08llx (dma) %#08x - add flags\n", - &ctx->add_flags, (unsigned long long)dma, - ctx->add_flags); - dma += field_size; - for (i = 0; i < 6; ++i) { - xhci_dbg(xhci, "@%p (virt) @%08llx (dma) %#08x - rsvd[%d]\n", - &ctx->rsvd[i], (unsigned long long)dma, - ctx->rsvd[i], i); + struct xhci_slot_ctx *slot_ctx; + dma_addr_t dma = ctx->dma; + int csz = HCC_64BYTE_CONTEXT(xhci->hcc_params); + + if (ctx->type == XHCI_CTX_TYPE_INPUT) { + struct xhci_input_control_ctx *ctrl_ctx = + xhci_get_input_control_ctx(xhci, ctx); + xhci_dbg(xhci, "@%p (virt) @%08llx (dma) %#08x - drop flags\n", + &ctrl_ctx->drop_flags, (unsigned long long)dma, + ctrl_ctx->drop_flags); dma += field_size; + xhci_dbg(xhci, "@%p (virt) @%08llx (dma) %#08x - add flags\n", + &ctrl_ctx->add_flags, (unsigned long long)dma, + ctrl_ctx->add_flags); + dma += field_size; + for (i = 0; i < 6; ++i) { + xhci_dbg(xhci, "@%p (virt) @%08llx (dma) %#08x - rsvd2[%d]\n", + &ctrl_ctx->rsvd2[i], (unsigned long long)dma, + ctrl_ctx->rsvd2[i], i); + dma += field_size; + } + + if (csz) + dbg_rsvd64(xhci, (u64 *)ctrl_ctx, dma); } - dma = xhci_dbg_slot_ctx(xhci, &ctx->slot, dma); - dma = xhci_dbg_ep_ctx(xhci, ctx->ep, dma, last_ep); -} -void xhci_dbg_device_ctx(struct xhci_hcd *xhci, struct xhci_device_ctx *ctx, dma_addr_t dma, unsigned int last_ep) -{ - dma = xhci_dbg_slot_ctx(xhci, &ctx->slot, dma); - dma = xhci_dbg_ep_ctx(xhci, ctx->ep, dma, last_ep); + slot_ctx = xhci_get_slot_ctx(xhci, ctx); + xhci_dbg_slot_ctx(xhci, ctx); + xhci_dbg_ep_ctx(xhci, ctx, last_ep); } diff --git a/drivers/usb/host/xhci-hcd.c b/drivers/usb/host/xhci-hcd.c index 921dd173d79..057a07e876b 100644 --- a/drivers/usb/host/xhci-hcd.c +++ b/drivers/usb/host/xhci-hcd.c @@ -722,7 +722,9 @@ int xhci_drop_endpoint(struct usb_hcd *hcd, struct usb_device *udev, struct usb_host_endpoint *ep) { struct xhci_hcd *xhci; - struct xhci_device_control *in_ctx; + struct xhci_container_ctx *in_ctx, *out_ctx; + struct xhci_input_control_ctx *ctrl_ctx; + struct xhci_slot_ctx *slot_ctx; unsigned int last_ctx; unsigned int ep_index; struct xhci_ep_ctx *ep_ctx; @@ -750,31 +752,34 @@ int xhci_drop_endpoint(struct usb_hcd *hcd, struct usb_device *udev, } in_ctx = xhci->devs[udev->slot_id]->in_ctx; + out_ctx = xhci->devs[udev->slot_id]->out_ctx; + ctrl_ctx = xhci_get_input_control_ctx(xhci, in_ctx); ep_index = xhci_get_endpoint_index(&ep->desc); - ep_ctx = &xhci->devs[udev->slot_id]->out_ctx->ep[ep_index]; + ep_ctx = xhci_get_ep_ctx(xhci, out_ctx, ep_index); /* If the HC already knows the endpoint is disabled, * or the HCD has noted it is disabled, ignore this request */ if ((ep_ctx->ep_info & EP_STATE_MASK) == EP_STATE_DISABLED || - in_ctx->drop_flags & xhci_get_endpoint_flag(&ep->desc)) { + ctrl_ctx->drop_flags & xhci_get_endpoint_flag(&ep->desc)) { xhci_warn(xhci, "xHCI %s called with disabled ep %p\n", __func__, ep); return 0; } - in_ctx->drop_flags |= drop_flag; - new_drop_flags = in_ctx->drop_flags; + ctrl_ctx->drop_flags |= drop_flag; + new_drop_flags = ctrl_ctx->drop_flags; - in_ctx->add_flags = ~drop_flag; - new_add_flags = in_ctx->add_flags; + ctrl_ctx->add_flags = ~drop_flag; + new_add_flags = ctrl_ctx->add_flags; - last_ctx = xhci_last_valid_endpoint(in_ctx->add_flags); + last_ctx = xhci_last_valid_endpoint(ctrl_ctx->add_flags); + slot_ctx = xhci_get_slot_ctx(xhci, in_ctx); /* Update the last valid endpoint context, if we deleted the last one */ - if ((in_ctx->slot.dev_info & LAST_CTX_MASK) > LAST_CTX(last_ctx)) { - in_ctx->slot.dev_info &= ~LAST_CTX_MASK; - in_ctx->slot.dev_info |= LAST_CTX(last_ctx); + if ((slot_ctx->dev_info & LAST_CTX_MASK) > LAST_CTX(last_ctx)) { + slot_ctx->dev_info &= ~LAST_CTX_MASK; + slot_ctx->dev_info |= LAST_CTX(last_ctx); } - new_slot_info = in_ctx->slot.dev_info; + new_slot_info = slot_ctx->dev_info; xhci_endpoint_zero(xhci, xhci->devs[udev->slot_id], ep); @@ -804,9 +809,11 @@ int xhci_add_endpoint(struct usb_hcd *hcd, struct usb_device *udev, struct usb_host_endpoint *ep) { struct xhci_hcd *xhci; - struct xhci_device_control *in_ctx; + struct xhci_container_ctx *in_ctx, *out_ctx; unsigned int ep_index; struct xhci_ep_ctx *ep_ctx; + struct xhci_slot_ctx *slot_ctx; + struct xhci_input_control_ctx *ctrl_ctx; u32 added_ctxs; unsigned int last_ctx; u32 new_add_flags, new_drop_flags, new_slot_info; @@ -839,12 +846,14 @@ int xhci_add_endpoint(struct usb_hcd *hcd, struct usb_device *udev, } in_ctx = xhci->devs[udev->slot_id]->in_ctx; + out_ctx = xhci->devs[udev->slot_id]->out_ctx; + ctrl_ctx = xhci_get_input_control_ctx(xhci, in_ctx); ep_index = xhci_get_endpoint_index(&ep->desc); - ep_ctx = &xhci->devs[udev->slot_id]->out_ctx->ep[ep_index]; + ep_ctx = xhci_get_ep_ctx(xhci, out_ctx, ep_index); /* If the HCD has already noted the endpoint is enabled, * ignore this request. */ - if (in_ctx->add_flags & xhci_get_endpoint_flag(&ep->desc)) { + if (ctrl_ctx->add_flags & xhci_get_endpoint_flag(&ep->desc)) { xhci_warn(xhci, "xHCI %s called with enabled ep %p\n", __func__, ep); return 0; @@ -862,8 +871,8 @@ int xhci_add_endpoint(struct usb_hcd *hcd, struct usb_device *udev, return -ENOMEM; } - in_ctx->add_flags |= added_ctxs; - new_add_flags = in_ctx->add_flags; + ctrl_ctx->add_flags |= added_ctxs; + new_add_flags = ctrl_ctx->add_flags; /* If xhci_endpoint_disable() was called for this endpoint, but the * xHC hasn't been notified yet through the check_bandwidth() call, @@ -871,14 +880,15 @@ int xhci_add_endpoint(struct usb_hcd *hcd, struct usb_device *udev, * descriptors. We must drop and re-add this endpoint, so we leave the * drop flags alone. */ - new_drop_flags = in_ctx->drop_flags; + new_drop_flags = ctrl_ctx->drop_flags; + slot_ctx = xhci_get_slot_ctx(xhci, in_ctx); /* Update the last valid endpoint context, if we just added one past */ - if ((in_ctx->slot.dev_info & LAST_CTX_MASK) < LAST_CTX(last_ctx)) { - in_ctx->slot.dev_info &= ~LAST_CTX_MASK; - in_ctx->slot.dev_info |= LAST_CTX(last_ctx); + if ((slot_ctx->dev_info & LAST_CTX_MASK) < LAST_CTX(last_ctx)) { + slot_ctx->dev_info &= ~LAST_CTX_MASK; + slot_ctx->dev_info |= LAST_CTX(last_ctx); } - new_slot_info = in_ctx->slot.dev_info; + new_slot_info = slot_ctx->dev_info; /* Store the usb_device pointer for later use */ ep->hcpriv = udev; @@ -892,9 +902,11 @@ int xhci_add_endpoint(struct usb_hcd *hcd, struct usb_device *udev, return 0; } -static void xhci_zero_in_ctx(struct xhci_virt_device *virt_dev) +static void xhci_zero_in_ctx(struct xhci_hcd *xhci, struct xhci_virt_device *virt_dev) { + struct xhci_input_control_ctx *ctrl_ctx; struct xhci_ep_ctx *ep_ctx; + struct xhci_slot_ctx *slot_ctx; int i; /* When a device's add flag and drop flag are zero, any subsequent @@ -902,13 +914,15 @@ static void xhci_zero_in_ctx(struct xhci_virt_device *virt_dev) * untouched. Make sure we don't leave any old state in the input * endpoint contexts. */ - virt_dev->in_ctx->drop_flags = 0; - virt_dev->in_ctx->add_flags = 0; - virt_dev->in_ctx->slot.dev_info &= ~LAST_CTX_MASK; + ctrl_ctx = xhci_get_input_control_ctx(xhci, virt_dev->in_ctx); + ctrl_ctx->drop_flags = 0; + ctrl_ctx->add_flags = 0; + slot_ctx = xhci_get_slot_ctx(xhci, virt_dev->in_ctx); + slot_ctx->dev_info &= ~LAST_CTX_MASK; /* Endpoint 0 is always valid */ - virt_dev->in_ctx->slot.dev_info |= LAST_CTX(1); + slot_ctx->dev_info |= LAST_CTX(1); for (i = 1; i < 31; ++i) { - ep_ctx = &virt_dev->in_ctx->ep[i]; + ep_ctx = xhci_get_ep_ctx(xhci, virt_dev->in_ctx, i); ep_ctx->ep_info = 0; ep_ctx->ep_info2 = 0; ep_ctx->deq = 0; @@ -934,6 +948,8 @@ int xhci_check_bandwidth(struct usb_hcd *hcd, struct usb_device *udev) unsigned long flags; struct xhci_hcd *xhci; struct xhci_virt_device *virt_dev; + struct xhci_input_control_ctx *ctrl_ctx; + struct xhci_slot_ctx *slot_ctx; ret = xhci_check_args(hcd, udev, NULL, 0, __func__); if (ret <= 0) @@ -949,16 +965,18 @@ int xhci_check_bandwidth(struct usb_hcd *hcd, struct usb_device *udev) virt_dev = xhci->devs[udev->slot_id]; /* See section 4.6.6 - A0 = 1; A1 = D0 = D1 = 0 */ - virt_dev->in_ctx->add_flags |= SLOT_FLAG; - virt_dev->in_ctx->add_flags &= ~EP0_FLAG; - virt_dev->in_ctx->drop_flags &= ~SLOT_FLAG; - virt_dev->in_ctx->drop_flags &= ~EP0_FLAG; + ctrl_ctx = xhci_get_input_control_ctx(xhci, virt_dev->in_ctx); + ctrl_ctx->add_flags |= SLOT_FLAG; + ctrl_ctx->add_flags &= ~EP0_FLAG; + ctrl_ctx->drop_flags &= ~SLOT_FLAG; + ctrl_ctx->drop_flags &= ~EP0_FLAG; xhci_dbg(xhci, "New Input Control Context:\n"); - xhci_dbg_ctx(xhci, virt_dev->in_ctx, virt_dev->in_ctx_dma, - LAST_CTX_TO_EP_NUM(virt_dev->in_ctx->slot.dev_info)); + slot_ctx = xhci_get_slot_ctx(xhci, virt_dev->in_ctx); + xhci_dbg_ctx(xhci, virt_dev->in_ctx, + LAST_CTX_TO_EP_NUM(slot_ctx->dev_info)); spin_lock_irqsave(&xhci->lock, flags); - ret = xhci_queue_configure_endpoint(xhci, virt_dev->in_ctx_dma, + ret = xhci_queue_configure_endpoint(xhci, virt_dev->in_ctx->dma, udev->slot_id); if (ret < 0) { spin_unlock_irqrestore(&xhci->lock, flags); @@ -1013,10 +1031,10 @@ int xhci_check_bandwidth(struct usb_hcd *hcd, struct usb_device *udev) } xhci_dbg(xhci, "Output context after successful config ep cmd:\n"); - xhci_dbg_device_ctx(xhci, virt_dev->out_ctx, virt_dev->out_ctx_dma, - LAST_CTX_TO_EP_NUM(virt_dev->in_ctx->slot.dev_info)); + xhci_dbg_ctx(xhci, virt_dev->out_ctx, + LAST_CTX_TO_EP_NUM(slot_ctx->dev_info)); - xhci_zero_in_ctx(virt_dev); + xhci_zero_in_ctx(xhci, virt_dev); /* Free any old rings */ for (i = 1; i < 31; ++i) { if (virt_dev->new_ep_rings[i]) { @@ -1054,7 +1072,7 @@ void xhci_reset_bandwidth(struct usb_hcd *hcd, struct usb_device *udev) virt_dev->new_ep_rings[i] = NULL; } } - xhci_zero_in_ctx(virt_dev); + xhci_zero_in_ctx(xhci, virt_dev); } /* Deal with stalled endpoints. The core should have sent the control message @@ -1187,6 +1205,8 @@ int xhci_address_device(struct usb_hcd *hcd, struct usb_device *udev) struct xhci_virt_device *virt_dev; int ret = 0; struct xhci_hcd *xhci = hcd_to_xhci(hcd); + struct xhci_slot_ctx *slot_ctx; + struct xhci_input_control_ctx *ctrl_ctx; u64 temp_64; if (!udev->slot_id) { @@ -1201,11 +1221,11 @@ int xhci_address_device(struct usb_hcd *hcd, struct usb_device *udev) xhci_setup_addressable_virt_dev(xhci, udev); /* Otherwise, assume the core has the device configured how it wants */ xhci_dbg(xhci, "Slot ID %d Input Context:\n", udev->slot_id); - xhci_dbg_ctx(xhci, virt_dev->in_ctx, virt_dev->in_ctx_dma, 2); + xhci_dbg_ctx(xhci, virt_dev->in_ctx, 2); spin_lock_irqsave(&xhci->lock, flags); - ret = xhci_queue_address_device(xhci, virt_dev->in_ctx_dma, - udev->slot_id); + ret = xhci_queue_address_device(xhci, virt_dev->in_ctx->dma, + udev->slot_id); if (ret) { spin_unlock_irqrestore(&xhci->lock, flags); xhci_dbg(xhci, "FIXME: allocate a command ring segment\n"); @@ -1246,7 +1266,7 @@ int xhci_address_device(struct usb_hcd *hcd, struct usb_device *udev) xhci_err(xhci, "ERROR: unexpected command completion " "code 0x%x.\n", virt_dev->cmd_status); xhci_dbg(xhci, "Slot ID %d Output Context:\n", udev->slot_id); - xhci_dbg_ctx(xhci, virt_dev->out_ctx, virt_dev->out_ctx_dma, 2); + xhci_dbg_ctx(xhci, virt_dev->out_ctx, 2); ret = -EINVAL; break; } @@ -1261,19 +1281,21 @@ int xhci_address_device(struct usb_hcd *hcd, struct usb_device *udev) (unsigned long long) xhci->dcbaa->dev_context_ptrs[udev->slot_id]); xhci_dbg(xhci, "Output Context DMA address = %#08llx\n", - (unsigned long long)virt_dev->out_ctx_dma); + (unsigned long long)virt_dev->out_ctx->dma); xhci_dbg(xhci, "Slot ID %d Input Context:\n", udev->slot_id); - xhci_dbg_ctx(xhci, virt_dev->in_ctx, virt_dev->in_ctx_dma, 2); + xhci_dbg_ctx(xhci, virt_dev->in_ctx, 2); xhci_dbg(xhci, "Slot ID %d Output Context:\n", udev->slot_id); - xhci_dbg_device_ctx(xhci, virt_dev->out_ctx, virt_dev->out_ctx_dma, 2); + xhci_dbg_ctx(xhci, virt_dev->out_ctx, 2); /* * USB core uses address 1 for the roothubs, so we add one to the * address given back to us by the HC. */ - udev->devnum = (virt_dev->out_ctx->slot.dev_state & DEV_ADDR_MASK) + 1; + slot_ctx = xhci_get_slot_ctx(xhci, virt_dev->out_ctx); + udev->devnum = (slot_ctx->dev_state & DEV_ADDR_MASK) + 1; /* Zero the input context control for later use */ - virt_dev->in_ctx->add_flags = 0; - virt_dev->in_ctx->drop_flags = 0; + ctrl_ctx = xhci_get_input_control_ctx(xhci, virt_dev->in_ctx); + ctrl_ctx->add_flags = 0; + ctrl_ctx->drop_flags = 0; xhci_dbg(xhci, "Device address = %d\n", udev->devnum); /* XXX Meh, not sure if anyone else but choose_address uses this. */ @@ -1315,7 +1337,6 @@ static int __init xhci_hcd_init(void) /* xhci_device_control has eight fields, and also * embeds one xhci_slot_ctx and 31 xhci_ep_ctx */ - BUILD_BUG_ON(sizeof(struct xhci_device_control) != (8+8+8*31)*32/8); BUILD_BUG_ON(sizeof(struct xhci_stream_ctx) != 4*32/8); BUILD_BUG_ON(sizeof(union xhci_trb) != 4*32/8); BUILD_BUG_ON(sizeof(struct xhci_erst_entry) != 4*32/8); diff --git a/drivers/usb/host/xhci-mem.c b/drivers/usb/host/xhci-mem.c index 8d6bdf2f801..e6b9a1c6002 100644 --- a/drivers/usb/host/xhci-mem.c +++ b/drivers/usb/host/xhci-mem.c @@ -189,6 +189,63 @@ fail: return 0; } +#define CTX_SIZE(_hcc) (HCC_64BYTE_CONTEXT(_hcc) ? 64 : 32) + +struct xhci_container_ctx *xhci_alloc_container_ctx(struct xhci_hcd *xhci, + int type, gfp_t flags) +{ + struct xhci_container_ctx *ctx = kzalloc(sizeof(*ctx), flags); + if (!ctx) + return NULL; + + BUG_ON((type != XHCI_CTX_TYPE_DEVICE) && (type != XHCI_CTX_TYPE_INPUT)); + ctx->type = type; + ctx->size = HCC_64BYTE_CONTEXT(xhci->hcc_params) ? 2048 : 1024; + if (type == XHCI_CTX_TYPE_INPUT) + ctx->size += CTX_SIZE(xhci->hcc_params); + + ctx->bytes = dma_pool_alloc(xhci->device_pool, flags, &ctx->dma); + memset(ctx->bytes, 0, ctx->size); + return ctx; +} + +void xhci_free_container_ctx(struct xhci_hcd *xhci, + struct xhci_container_ctx *ctx) +{ + dma_pool_free(xhci->device_pool, ctx->bytes, ctx->dma); + kfree(ctx); +} + +struct xhci_input_control_ctx *xhci_get_input_control_ctx(struct xhci_hcd *xhci, + struct xhci_container_ctx *ctx) +{ + BUG_ON(ctx->type != XHCI_CTX_TYPE_INPUT); + return (struct xhci_input_control_ctx *)ctx->bytes; +} + +struct xhci_slot_ctx *xhci_get_slot_ctx(struct xhci_hcd *xhci, + struct xhci_container_ctx *ctx) +{ + if (ctx->type == XHCI_CTX_TYPE_DEVICE) + return (struct xhci_slot_ctx *)ctx->bytes; + + return (struct xhci_slot_ctx *) + (ctx->bytes + CTX_SIZE(xhci->hcc_params)); +} + +struct xhci_ep_ctx *xhci_get_ep_ctx(struct xhci_hcd *xhci, + struct xhci_container_ctx *ctx, + unsigned int ep_index) +{ + /* increment ep index by offset of start of ep ctx array */ + ep_index++; + if (ctx->type == XHCI_CTX_TYPE_INPUT) + ep_index++; + + return (struct xhci_ep_ctx *) + (ctx->bytes + (ep_index * CTX_SIZE(xhci->hcc_params))); +} + /* All the xhci_tds in the ring's TD list should be freed at this point */ void xhci_free_virt_device(struct xhci_hcd *xhci, int slot_id) { @@ -209,11 +266,10 @@ void xhci_free_virt_device(struct xhci_hcd *xhci, int slot_id) xhci_ring_free(xhci, dev->ep_rings[i]); if (dev->in_ctx) - dma_pool_free(xhci->device_pool, - dev->in_ctx, dev->in_ctx_dma); + xhci_free_container_ctx(xhci, dev->in_ctx); if (dev->out_ctx) - dma_pool_free(xhci->device_pool, - dev->out_ctx, dev->out_ctx_dma); + xhci_free_container_ctx(xhci, dev->out_ctx); + kfree(xhci->devs[slot_id]); xhci->devs[slot_id] = 0; } @@ -221,7 +277,6 @@ void xhci_free_virt_device(struct xhci_hcd *xhci, int slot_id) int xhci_alloc_virt_device(struct xhci_hcd *xhci, int slot_id, struct usb_device *udev, gfp_t flags) { - dma_addr_t dma; struct xhci_virt_device *dev; /* Slot ID 0 is reserved */ @@ -235,26 +290,21 @@ int xhci_alloc_virt_device(struct xhci_hcd *xhci, int slot_id, return 0; dev = xhci->devs[slot_id]; - /* Allocate the (output) device context that will be used in the HC. - * The structure is 32 bytes smaller than the input context, but that's - * fine. - */ - dev->out_ctx = dma_pool_alloc(xhci->device_pool, flags, &dma); + /* Allocate the (output) device context that will be used in the HC. */ + dev->out_ctx = xhci_alloc_container_ctx(xhci, XHCI_CTX_TYPE_DEVICE, flags); if (!dev->out_ctx) goto fail; - dev->out_ctx_dma = dma; + xhci_dbg(xhci, "Slot %d output ctx = 0x%llx (dma)\n", slot_id, - (unsigned long long)dma); - memset(dev->out_ctx, 0, sizeof(*dev->out_ctx)); + (unsigned long long)dev->out_ctx->dma); /* Allocate the (input) device context for address device command */ - dev->in_ctx = dma_pool_alloc(xhci->device_pool, flags, &dma); + dev->in_ctx = xhci_alloc_container_ctx(xhci, XHCI_CTX_TYPE_INPUT, flags); if (!dev->in_ctx) goto fail; - dev->in_ctx_dma = dma; + xhci_dbg(xhci, "Slot %d input ctx = 0x%llx (dma)\n", slot_id, - (unsigned long long)dma); - memset(dev->in_ctx, 0, sizeof(*dev->in_ctx)); + (unsigned long long)dev->in_ctx->dma); /* Allocate endpoint 0 ring */ dev->ep_rings[0] = xhci_ring_alloc(xhci, 1, true, flags); @@ -264,7 +314,7 @@ int xhci_alloc_virt_device(struct xhci_hcd *xhci, int slot_id, init_completion(&dev->cmd_completion); /* Point to output device context in dcbaa. */ - xhci->dcbaa->dev_context_ptrs[slot_id] = dev->out_ctx_dma; + xhci->dcbaa->dev_context_ptrs[slot_id] = dev->out_ctx->dma; xhci_dbg(xhci, "Set slot id %d dcbaa entry %p to 0x%llx\n", slot_id, &xhci->dcbaa->dev_context_ptrs[slot_id], @@ -282,6 +332,8 @@ int xhci_setup_addressable_virt_dev(struct xhci_hcd *xhci, struct usb_device *ud struct xhci_virt_device *dev; struct xhci_ep_ctx *ep0_ctx; struct usb_device *top_dev; + struct xhci_slot_ctx *slot_ctx; + struct xhci_input_control_ctx *ctrl_ctx; dev = xhci->devs[udev->slot_id]; /* Slot ID 0 is reserved */ @@ -290,27 +342,29 @@ int xhci_setup_addressable_virt_dev(struct xhci_hcd *xhci, struct usb_device *ud udev->slot_id); return -EINVAL; } - ep0_ctx = &dev->in_ctx->ep[0]; + ep0_ctx = xhci_get_ep_ctx(xhci, dev->in_ctx, 0); + ctrl_ctx = xhci_get_input_control_ctx(xhci, dev->in_ctx); + slot_ctx = xhci_get_slot_ctx(xhci, dev->in_ctx); /* 2) New slot context and endpoint 0 context are valid*/ - dev->in_ctx->add_flags = SLOT_FLAG | EP0_FLAG; + ctrl_ctx->add_flags = SLOT_FLAG | EP0_FLAG; /* 3) Only the control endpoint is valid - one endpoint context */ - dev->in_ctx->slot.dev_info |= LAST_CTX(1); + slot_ctx->dev_info |= LAST_CTX(1); switch (udev->speed) { case USB_SPEED_SUPER: - dev->in_ctx->slot.dev_info |= (u32) udev->route; - dev->in_ctx->slot.dev_info |= (u32) SLOT_SPEED_SS; + slot_ctx->dev_info |= (u32) udev->route; + slot_ctx->dev_info |= (u32) SLOT_SPEED_SS; break; case USB_SPEED_HIGH: - dev->in_ctx->slot.dev_info |= (u32) SLOT_SPEED_HS; + slot_ctx->dev_info |= (u32) SLOT_SPEED_HS; break; case USB_SPEED_FULL: - dev->in_ctx->slot.dev_info |= (u32) SLOT_SPEED_FS; + slot_ctx->dev_info |= (u32) SLOT_SPEED_FS; break; case USB_SPEED_LOW: - dev->in_ctx->slot.dev_info |= (u32) SLOT_SPEED_LS; + slot_ctx->dev_info |= (u32) SLOT_SPEED_LS; break; case USB_SPEED_VARIABLE: xhci_dbg(xhci, "FIXME xHCI doesn't support wireless speeds\n"); @@ -324,7 +378,7 @@ int xhci_setup_addressable_virt_dev(struct xhci_hcd *xhci, struct usb_device *ud for (top_dev = udev; top_dev->parent && top_dev->parent->parent; top_dev = top_dev->parent) /* Found device below root hub */; - dev->in_ctx->slot.dev_info2 |= (u32) ROOT_HUB_PORT(top_dev->portnum); + slot_ctx->dev_info2 |= (u32) ROOT_HUB_PORT(top_dev->portnum); xhci_dbg(xhci, "Set root hub portnum to %d\n", top_dev->portnum); /* Is this a LS/FS device under a HS hub? */ @@ -334,8 +388,8 @@ int xhci_setup_addressable_virt_dev(struct xhci_hcd *xhci, struct usb_device *ud */ if ((udev->speed == USB_SPEED_LOW || udev->speed == USB_SPEED_FULL) && udev->tt) { - dev->in_ctx->slot.tt_info = udev->tt->hub->slot_id; - dev->in_ctx->slot.tt_info |= udev->ttport << 8; + slot_ctx->tt_info = udev->tt->hub->slot_id; + slot_ctx->tt_info |= udev->ttport << 8; } xhci_dbg(xhci, "udev->tt = %p\n", udev->tt); xhci_dbg(xhci, "udev->ttport = 0x%x\n", udev->ttport); @@ -466,7 +520,7 @@ int xhci_endpoint_init(struct xhci_hcd *xhci, unsigned int max_burst; ep_index = xhci_get_endpoint_index(&ep->desc); - ep_ctx = &virt_dev->in_ctx->ep[ep_index]; + ep_ctx = xhci_get_ep_ctx(xhci, virt_dev->in_ctx, ep_index); /* Set up the endpoint ring */ virt_dev->new_ep_rings[ep_index] = xhci_ring_alloc(xhci, 1, true, mem_flags); @@ -533,7 +587,7 @@ void xhci_endpoint_zero(struct xhci_hcd *xhci, struct xhci_ep_ctx *ep_ctx; ep_index = xhci_get_endpoint_index(&ep->desc); - ep_ctx = &virt_dev->in_ctx->ep[ep_index]; + ep_ctx = xhci_get_ep_ctx(xhci, virt_dev->in_ctx, ep_index); ep_ctx->ep_info = 0; ep_ctx->ep_info2 = 0; @@ -753,11 +807,10 @@ int xhci_mem_init(struct xhci_hcd *xhci, gfp_t flags) */ xhci->segment_pool = dma_pool_create("xHCI ring segments", dev, SEGMENT_SIZE, 64, xhci->page_size); + /* See Table 46 and Note on Figure 55 */ - /* FIXME support 64-byte contexts */ xhci->device_pool = dma_pool_create("xHCI input/output contexts", dev, - sizeof(struct xhci_device_control), - 64, xhci->page_size); + 2112, 64, xhci->page_size); if (!xhci->segment_pool || !xhci->device_pool) goto fail; diff --git a/drivers/usb/host/xhci-ring.c b/drivers/usb/host/xhci-ring.c index 0903e98989e..ea31753c313 100644 --- a/drivers/usb/host/xhci-ring.c +++ b/drivers/usb/host/xhci-ring.c @@ -362,6 +362,7 @@ static void find_new_dequeue_state(struct xhci_hcd *xhci, struct xhci_virt_device *dev = xhci->devs[slot_id]; struct xhci_ring *ep_ring = dev->ep_rings[ep_index]; struct xhci_generic_trb *trb; + struct xhci_ep_ctx *ep_ctx; state->new_cycle_state = 0; state->new_deq_seg = find_trb_seg(cur_td->start_seg, @@ -370,7 +371,8 @@ static void find_new_dequeue_state(struct xhci_hcd *xhci, if (!state->new_deq_seg) BUG(); /* Dig out the cycle state saved by the xHC during the stop ep cmd */ - state->new_cycle_state = 0x1 & dev->out_ctx->ep[ep_index].deq; + ep_ctx = xhci_get_ep_ctx(xhci, dev->out_ctx, ep_index); + state->new_cycle_state = 0x1 & ep_ctx->deq; state->new_deq_ptr = cur_td->last_trb; state->new_deq_seg = find_trb_seg(state->new_deq_seg, @@ -570,11 +572,15 @@ static void handle_set_deq_completion(struct xhci_hcd *xhci, unsigned int ep_index; struct xhci_ring *ep_ring; struct xhci_virt_device *dev; + struct xhci_ep_ctx *ep_ctx; + struct xhci_slot_ctx *slot_ctx; slot_id = TRB_TO_SLOT_ID(trb->generic.field[3]); ep_index = TRB_TO_EP_INDEX(trb->generic.field[3]); dev = xhci->devs[slot_id]; ep_ring = dev->ep_rings[ep_index]; + ep_ctx = xhci_get_ep_ctx(xhci, dev->out_ctx, ep_index); + slot_ctx = xhci_get_slot_ctx(xhci, dev->out_ctx); if (GET_COMP_CODE(event->status) != COMP_SUCCESS) { unsigned int ep_state; @@ -588,9 +594,9 @@ static void handle_set_deq_completion(struct xhci_hcd *xhci, case COMP_CTX_STATE: xhci_warn(xhci, "WARN Set TR Deq Ptr cmd failed due " "to incorrect slot or ep state.\n"); - ep_state = dev->out_ctx->ep[ep_index].ep_info; + ep_state = ep_ctx->ep_info; ep_state &= EP_STATE_MASK; - slot_state = dev->out_ctx->slot.dev_state; + slot_state = slot_ctx->dev_state; slot_state = GET_SLOT_STATE(slot_state); xhci_dbg(xhci, "Slot state = %u, EP state = %u\n", slot_state, ep_state); @@ -613,7 +619,7 @@ static void handle_set_deq_completion(struct xhci_hcd *xhci, */ } else { xhci_dbg(xhci, "Successful Set TR Deq Ptr cmd, deq = @%08llx\n", - dev->out_ctx->ep[ep_index].deq); + ep_ctx->deq); } ep_ring->state &= ~SET_DEQ_PENDING; @@ -795,6 +801,7 @@ static int handle_tx_event(struct xhci_hcd *xhci, union xhci_trb *event_trb; struct urb *urb = 0; int status = -EINPROGRESS; + struct xhci_ep_ctx *ep_ctx; xhci_dbg(xhci, "In %s\n", __func__); xdev = xhci->devs[TRB_TO_SLOT_ID(event->flags)]; @@ -807,7 +814,8 @@ static int handle_tx_event(struct xhci_hcd *xhci, ep_index = TRB_TO_EP_ID(event->flags) - 1; xhci_dbg(xhci, "%s - ep index = %d\n", __func__, ep_index); ep_ring = xdev->ep_rings[ep_index]; - if (!ep_ring || (xdev->out_ctx->ep[ep_index].ep_info & EP_STATE_MASK) == EP_STATE_DISABLED) { + ep_ctx = xhci_get_ep_ctx(xhci, xdev->out_ctx, ep_index); + if (!ep_ring || (ep_ctx->ep_info & EP_STATE_MASK) == EP_STATE_DISABLED) { xhci_err(xhci, "ERROR Transfer event pointed to disabled endpoint\n"); return -ENODEV; } @@ -1193,9 +1201,9 @@ static int prepare_transfer(struct xhci_hcd *xhci, gfp_t mem_flags) { int ret; - + struct xhci_ep_ctx *ep_ctx = xhci_get_ep_ctx(xhci, xdev->out_ctx, ep_index); ret = prepare_ring(xhci, xdev->ep_rings[ep_index], - xdev->out_ctx->ep[ep_index].ep_info & EP_STATE_MASK, + ep_ctx->ep_info & EP_STATE_MASK, num_trbs, mem_flags); if (ret) return ret; diff --git a/drivers/usb/host/xhci.h b/drivers/usb/host/xhci.h index d4d3c7777fb..9c108c63270 100644 --- a/drivers/usb/host/xhci.h +++ b/drivers/usb/host/xhci.h @@ -446,6 +446,27 @@ struct xhci_doorbell_array { #define EPI_TO_DB(p) (((p) + 1) & 0xff) +/** + * struct xhci_container_ctx + * @type: Type of context. Used to calculated offsets to contained contexts. + * @size: Size of the context data + * @bytes: The raw context data given to HW + * @dma: dma address of the bytes + * + * Represents either a Device or Input context. Holds a pointer to the raw + * memory used for the context (bytes) and dma address of it (dma). + */ +struct xhci_container_ctx { + unsigned type; +#define XHCI_CTX_TYPE_DEVICE 0x1 +#define XHCI_CTX_TYPE_INPUT 0x2 + + int size; + + u8 *bytes; + dma_addr_t dma; +}; + /** * struct xhci_slot_ctx * @dev_info: Route string, device speed, hub info, and last valid endpoint @@ -583,32 +604,16 @@ struct xhci_ep_ctx { /** - * struct xhci_device_control - * Input context; see section 6.2.5. + * struct xhci_input_control_context + * Input control context; see section 6.2.5. * * @drop_context: set the bit of the endpoint context you want to disable * @add_context: set the bit of the endpoint context you want to enable */ -struct xhci_device_control { - /* Input control context */ +struct xhci_input_control_ctx { u32 drop_flags; u32 add_flags; - u32 rsvd[6]; - /* Copy of device context */ - struct xhci_slot_ctx slot; - struct xhci_ep_ctx ep[31]; -}; - -/** - * struct xhci_device_ctx - * Device context; see section 6.2.1. - * - * @slot: slot context for the device. - * @ep: array of endpoint contexts for the device. - */ -struct xhci_device_ctx { - struct xhci_slot_ctx slot; - struct xhci_ep_ctx ep[31]; + u32 rsvd2[6]; }; /* drop context bitmasks */ @@ -616,7 +621,6 @@ struct xhci_device_ctx { /* add context bitmasks */ #define ADD_EP(x) (0x1 << x) - struct xhci_virt_device { /* * Commands to the hardware are passed an "input context" that @@ -626,11 +630,10 @@ struct xhci_virt_device { * track of input and output contexts separately because * these commands might fail and we don't trust the hardware. */ - struct xhci_device_ctx *out_ctx; - dma_addr_t out_ctx_dma; + struct xhci_container_ctx *out_ctx; /* Used for addressing devices and configuration changes */ - struct xhci_device_control *in_ctx; - dma_addr_t in_ctx_dma; + struct xhci_container_ctx *in_ctx; + /* FIXME when stream support is added */ struct xhci_ring *ep_rings[31]; /* Temporary storage in case the configure endpoint command fails and we @@ -1139,8 +1142,7 @@ void xhci_debug_ring(struct xhci_hcd *xhci, struct xhci_ring *ring); void xhci_dbg_erst(struct xhci_hcd *xhci, struct xhci_erst *erst); void xhci_dbg_cmd_ptrs(struct xhci_hcd *xhci); void xhci_dbg_ring_ptrs(struct xhci_hcd *xhci, struct xhci_ring *ring); -void xhci_dbg_ctx(struct xhci_hcd *xhci, struct xhci_device_control *ctx, dma_addr_t dma, unsigned int last_ep); -void xhci_dbg_device_ctx(struct xhci_hcd *xhci, struct xhci_device_ctx *ctx, dma_addr_t dma, unsigned int last_ep); +void xhci_dbg_ctx(struct xhci_hcd *xhci, struct xhci_container_ctx *ctx, unsigned int last_ep); /* xHCI memory managment */ void xhci_mem_cleanup(struct xhci_hcd *xhci); @@ -1207,4 +1209,9 @@ int xhci_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue, u16 wIndex, char *buf, u16 wLength); int xhci_hub_status_data(struct usb_hcd *hcd, char *buf); +/* xHCI contexts */ +struct xhci_input_control_ctx *xhci_get_input_control_ctx(struct xhci_hcd *xhci, struct xhci_container_ctx *ctx); +struct xhci_slot_ctx *xhci_get_slot_ctx(struct xhci_hcd *xhci, struct xhci_container_ctx *ctx); +struct xhci_ep_ctx *xhci_get_ep_ctx(struct xhci_hcd *xhci, struct xhci_container_ctx *ctx, unsigned int ep_index); + #endif /* __LINUX_XHCI_HCD_H */ -- cgit v1.2.3 From c92bcfa7b4038d8ffe1f02e21269f18eb0b64144 Mon Sep 17 00:00:00 2001 From: Sarah Sharp Date: Mon, 27 Jul 2009 12:05:21 -0700 Subject: USB: xhci: Stall handling bug fixes. Correct the xHCI code to handle stalls on USB endpoints. We need to move the endpoint ring's dequeue pointer past the stalled transfer, or the HW will try to restart the transfer the next time the doorbell is rung. Don't attempt to clear a halt on an endpoint if we haven't seen a stalled transfer for it. The USB core will attempt to clear a halt on all endpoints when it selects a new configuration. Signed-off-by: Sarah Sharp Signed-off-by: Greg Kroah-Hartman --- drivers/usb/host/xhci-hcd.c | 24 ++++++++ drivers/usb/host/xhci-ring.c | 133 +++++++++++++++++++++++++++---------------- drivers/usb/host/xhci.h | 12 ++++ 3 files changed, 120 insertions(+), 49 deletions(-) diff --git a/drivers/usb/host/xhci-hcd.c b/drivers/usb/host/xhci-hcd.c index 057a07e876b..816c39caca1 100644 --- a/drivers/usb/host/xhci-hcd.c +++ b/drivers/usb/host/xhci-hcd.c @@ -1089,6 +1089,8 @@ void xhci_endpoint_reset(struct usb_hcd *hcd, unsigned int ep_index; unsigned long flags; int ret; + struct xhci_dequeue_state deq_state; + struct xhci_ring *ep_ring; xhci = hcd_to_xhci(hcd); udev = (struct usb_device *) ep->hcpriv; @@ -1098,11 +1100,33 @@ void xhci_endpoint_reset(struct usb_hcd *hcd, if (!ep->hcpriv) return; ep_index = xhci_get_endpoint_index(&ep->desc); + ep_ring = xhci->devs[udev->slot_id]->ep_rings[ep_index]; + if (!ep_ring->stopped_td) { + xhci_dbg(xhci, "Endpoint 0x%x not halted, refusing to reset.\n", + ep->desc.bEndpointAddress); + return; + } xhci_dbg(xhci, "Queueing reset endpoint command\n"); spin_lock_irqsave(&xhci->lock, flags); ret = xhci_queue_reset_ep(xhci, udev->slot_id, ep_index); + /* + * Can't change the ring dequeue pointer until it's transitioned to the + * stopped state, which is only upon a successful reset endpoint + * command. Better hope that last command worked! + */ if (!ret) { + xhci_dbg(xhci, "Cleaning up stalled endpoint ring\n"); + /* We need to move the HW's dequeue pointer past this TD, + * or it will attempt to resend it on the next doorbell ring. + */ + xhci_find_new_dequeue_state(xhci, udev->slot_id, + ep_index, ep_ring->stopped_td, &deq_state); + xhci_dbg(xhci, "Queueing new dequeue state\n"); + xhci_queue_new_dequeue_state(xhci, ep_ring, + udev->slot_id, + ep_index, &deq_state); + kfree(ep_ring->stopped_td); xhci_ring_cmd_db(xhci); } spin_unlock_irqrestore(&xhci->lock, flags); diff --git a/drivers/usb/host/xhci-ring.c b/drivers/usb/host/xhci-ring.c index ea31753c313..aa88a067148 100644 --- a/drivers/usb/host/xhci-ring.c +++ b/drivers/usb/host/xhci-ring.c @@ -335,12 +335,6 @@ static struct xhci_segment *find_trb_seg( return cur_seg; } -struct dequeue_state { - struct xhci_segment *new_deq_seg; - union xhci_trb *new_deq_ptr; - int new_cycle_state; -}; - /* * Move the xHC's endpoint ring dequeue pointer past cur_td. * Record the new state of the xHC's endpoint ring dequeue segment, @@ -355,26 +349,30 @@ struct dequeue_state { * - Finally we move the dequeue state one TRB further, toggling the cycle bit * if we've moved it past a link TRB with the toggle cycle bit set. */ -static void find_new_dequeue_state(struct xhci_hcd *xhci, +void xhci_find_new_dequeue_state(struct xhci_hcd *xhci, unsigned int slot_id, unsigned int ep_index, - struct xhci_td *cur_td, struct dequeue_state *state) + struct xhci_td *cur_td, struct xhci_dequeue_state *state) { struct xhci_virt_device *dev = xhci->devs[slot_id]; struct xhci_ring *ep_ring = dev->ep_rings[ep_index]; struct xhci_generic_trb *trb; struct xhci_ep_ctx *ep_ctx; + dma_addr_t addr; state->new_cycle_state = 0; + xhci_dbg(xhci, "Finding segment containing stopped TRB.\n"); state->new_deq_seg = find_trb_seg(cur_td->start_seg, ep_ring->stopped_trb, &state->new_cycle_state); if (!state->new_deq_seg) BUG(); /* Dig out the cycle state saved by the xHC during the stop ep cmd */ + xhci_dbg(xhci, "Finding endpoint context\n"); ep_ctx = xhci_get_ep_ctx(xhci, dev->out_ctx, ep_index); state->new_cycle_state = 0x1 & ep_ctx->deq; state->new_deq_ptr = cur_td->last_trb; + xhci_dbg(xhci, "Finding segment containing last TRB in TD.\n"); state->new_deq_seg = find_trb_seg(state->new_deq_seg, state->new_deq_ptr, &state->new_cycle_state); @@ -388,6 +386,12 @@ static void find_new_dequeue_state(struct xhci_hcd *xhci, next_trb(xhci, ep_ring, &state->new_deq_seg, &state->new_deq_ptr); /* Don't update the ring cycle state for the producer (us). */ + xhci_dbg(xhci, "New dequeue segment = %p (virtual)\n", + state->new_deq_seg); + addr = xhci_trb_virt_to_dma(state->new_deq_seg, state->new_deq_ptr); + xhci_dbg(xhci, "New dequeue pointer = 0x%llx (DMA)\n", + (unsigned long long) addr); + xhci_dbg(xhci, "Setting dequeue pointer in internal ring state.\n"); ep_ring->dequeue = state->new_deq_ptr; ep_ring->deq_seg = state->new_deq_seg; } @@ -437,6 +441,30 @@ static int queue_set_tr_deq(struct xhci_hcd *xhci, int slot_id, unsigned int ep_index, struct xhci_segment *deq_seg, union xhci_trb *deq_ptr, u32 cycle_state); +void xhci_queue_new_dequeue_state(struct xhci_hcd *xhci, + struct xhci_ring *ep_ring, unsigned int slot_id, + unsigned int ep_index, struct xhci_dequeue_state *deq_state) +{ + xhci_dbg(xhci, "Set TR Deq Ptr cmd, new deq seg = %p (0x%llx dma), " + "new deq ptr = %p (0x%llx dma), new cycle = %u\n", + deq_state->new_deq_seg, + (unsigned long long)deq_state->new_deq_seg->dma, + deq_state->new_deq_ptr, + (unsigned long long)xhci_trb_virt_to_dma(deq_state->new_deq_seg, deq_state->new_deq_ptr), + deq_state->new_cycle_state); + queue_set_tr_deq(xhci, slot_id, ep_index, + deq_state->new_deq_seg, + deq_state->new_deq_ptr, + (u32) deq_state->new_cycle_state); + /* Stop the TD queueing code from ringing the doorbell until + * this command completes. The HC won't set the dequeue pointer + * if the ring is running, and ringing the doorbell starts the + * ring running. + */ + ep_ring->state |= SET_DEQ_PENDING; + xhci_ring_cmd_db(xhci); +} + /* * When we get a command completion for a Stop Endpoint Command, we need to * unlink any cancelled TDs from the ring. There are two ways to do that: @@ -457,7 +485,7 @@ static void handle_stopped_endpoint(struct xhci_hcd *xhci, struct xhci_td *cur_td = 0; struct xhci_td *last_unlinked_td; - struct dequeue_state deq_state; + struct xhci_dequeue_state deq_state; #ifdef CONFIG_USB_HCD_STAT ktime_t stop_time = ktime_get(); #endif @@ -485,7 +513,7 @@ static void handle_stopped_endpoint(struct xhci_hcd *xhci, * move the xHC endpoint ring dequeue pointer past this TD. */ if (cur_td == ep_ring->stopped_td) - find_new_dequeue_state(xhci, slot_id, ep_index, cur_td, + xhci_find_new_dequeue_state(xhci, slot_id, ep_index, cur_td, &deq_state); else td_to_noop(xhci, ep_ring, cur_td); @@ -501,24 +529,8 @@ static void handle_stopped_endpoint(struct xhci_hcd *xhci, /* If necessary, queue a Set Transfer Ring Dequeue Pointer command */ if (deq_state.new_deq_ptr && deq_state.new_deq_seg) { - xhci_dbg(xhci, "Set TR Deq Ptr cmd, new deq seg = %p (0x%llx dma), " - "new deq ptr = %p (0x%llx dma), new cycle = %u\n", - deq_state.new_deq_seg, - (unsigned long long)deq_state.new_deq_seg->dma, - deq_state.new_deq_ptr, - (unsigned long long)xhci_trb_virt_to_dma(deq_state.new_deq_seg, deq_state.new_deq_ptr), - deq_state.new_cycle_state); - queue_set_tr_deq(xhci, slot_id, ep_index, - deq_state.new_deq_seg, - deq_state.new_deq_ptr, - (u32) deq_state.new_cycle_state); - /* Stop the TD queueing code from ringing the doorbell until - * this command completes. The HC won't set the dequeue pointer - * if the ring is running, and ringing the doorbell starts the - * ring running. - */ - ep_ring->state |= SET_DEQ_PENDING; - xhci_ring_cmd_db(xhci); + xhci_queue_new_dequeue_state(xhci, ep_ring, + slot_id, ep_index, &deq_state); } else { /* Otherwise just ring the doorbell to restart the ring */ ring_ep_doorbell(xhci, slot_id, ep_index); @@ -929,12 +941,15 @@ static int handle_tx_event(struct xhci_hcd *xhci, if (event_trb != ep_ring->dequeue) { /* The event was for the status stage */ if (event_trb == td->last_trb) { - /* Did we already see a short data stage? */ - if (td->urb->actual_length != 0) - status = -EREMOTEIO; - else + if (td->urb->actual_length != 0) { + /* Don't overwrite a previously set error code */ + if (status == -EINPROGRESS || status == 0) + /* Did we already see a short data stage? */ + status = -EREMOTEIO; + } else { td->urb->actual_length = td->urb->transfer_buffer_length; + } } else { /* Maybe the event was for the data stage? */ if (GET_COMP_CODE(event->transfer_len) != COMP_STOP_INVAL) { @@ -992,16 +1007,20 @@ static int handle_tx_event(struct xhci_hcd *xhci, TRB_LEN(event->transfer_len)); td->urb->actual_length = 0; } - if (td->urb->transfer_flags & URB_SHORT_NOT_OK) - status = -EREMOTEIO; - else - status = 0; + /* Don't overwrite a previously set error code */ + if (status == -EINPROGRESS) { + if (td->urb->transfer_flags & URB_SHORT_NOT_OK) + status = -EREMOTEIO; + else + status = 0; + } } else { td->urb->actual_length = td->urb->transfer_buffer_length; /* Ignore a short packet completion if the * untransferred length was zero. */ - status = 0; + if (status == -EREMOTEIO) + status = 0; } } else { /* Slow path - walk the list, starting from the dequeue @@ -1028,19 +1047,30 @@ static int handle_tx_event(struct xhci_hcd *xhci, TRB_LEN(event->transfer_len); } } - /* The Endpoint Stop Command completion will take care of - * any stopped TDs. A stopped TD may be restarted, so don't update the - * ring dequeue pointer or take this TD off any lists yet. - */ if (GET_COMP_CODE(event->transfer_len) == COMP_STOP_INVAL || GET_COMP_CODE(event->transfer_len) == COMP_STOP) { + /* The Endpoint Stop Command completion will take care of any + * stopped TDs. A stopped TD may be restarted, so don't update + * the ring dequeue pointer or take this TD off any lists yet. + */ ep_ring->stopped_td = td; ep_ring->stopped_trb = event_trb; } else { - /* Update ring dequeue pointer */ - while (ep_ring->dequeue != td->last_trb) + if (GET_COMP_CODE(event->transfer_len) == COMP_STALL) { + /* The transfer is completed from the driver's + * perspective, but we need to issue a set dequeue + * command for this stalled endpoint to move the dequeue + * pointer past the TD. We can't do that here because + * the halt condition must be cleared first. + */ + ep_ring->stopped_td = td; + ep_ring->stopped_trb = event_trb; + } else { + /* Update ring dequeue pointer */ + while (ep_ring->dequeue != td->last_trb) + inc_deq(xhci, ep_ring, false); inc_deq(xhci, ep_ring, false); - inc_deq(xhci, ep_ring, false); + } /* Clean up the endpoint's TD list */ urb = td->urb; @@ -1050,7 +1080,10 @@ static int handle_tx_event(struct xhci_hcd *xhci, list_del(&td->cancelled_td_list); ep_ring->cancels_pending--; } - kfree(td); + /* Leave the TD around for the reset endpoint function to use */ + if (GET_COMP_CODE(event->transfer_len) != COMP_STALL) { + kfree(td); + } urb->hcpriv = NULL; } cleanup: @@ -1166,13 +1199,13 @@ static int prepare_ring(struct xhci_hcd *xhci, struct xhci_ring *ep_ring, */ xhci_warn(xhci, "WARN urb submitted to disabled ep\n"); return -ENOENT; - case EP_STATE_HALTED: case EP_STATE_ERROR: - xhci_warn(xhci, "WARN waiting for halt or error on ep " - "to be cleared\n"); + xhci_warn(xhci, "WARN waiting for error on ep to be cleared\n"); /* FIXME event handling code for error needs to clear it */ /* XXX not sure if this should be -ENOENT or not */ return -EINVAL; + case EP_STATE_HALTED: + xhci_dbg(xhci, "WARN halted endpoint, queueing URB anyway.\n"); case EP_STATE_STOPPED: case EP_STATE_RUNNING: break; @@ -1724,10 +1757,12 @@ static int queue_set_tr_deq(struct xhci_hcd *xhci, int slot_id, u32 type = TRB_TYPE(TRB_SET_DEQ); addr = xhci_trb_virt_to_dma(deq_seg, deq_ptr); - if (addr == 0) + if (addr == 0) { xhci_warn(xhci, "WARN Cannot submit Set TR Deq Ptr\n"); xhci_warn(xhci, "WARN deq seg = %p, deq pt = %p\n", deq_seg, deq_ptr); + return 0; + } return queue_command(xhci, lower_32_bits(addr) | cycle_state, upper_32_bits(addr), 0, trb_slot_id | trb_ep_index | type); diff --git a/drivers/usb/host/xhci.h b/drivers/usb/host/xhci.h index 9c108c63270..d31d32206ba 100644 --- a/drivers/usb/host/xhci.h +++ b/drivers/usb/host/xhci.h @@ -952,6 +952,12 @@ struct xhci_ring { u32 cycle_state; }; +struct xhci_dequeue_state { + struct xhci_segment *new_deq_seg; + union xhci_trb *new_deq_ptr; + int new_cycle_state; +}; + struct xhci_erst_entry { /* 64-bit event ring segment address */ u64 seg_addr; @@ -1203,6 +1209,12 @@ int xhci_queue_configure_endpoint(struct xhci_hcd *xhci, dma_addr_t in_ctx_ptr, u32 slot_id); int xhci_queue_reset_ep(struct xhci_hcd *xhci, int slot_id, unsigned int ep_index); +void xhci_find_new_dequeue_state(struct xhci_hcd *xhci, + unsigned int slot_id, unsigned int ep_index, + struct xhci_td *cur_td, struct xhci_dequeue_state *state); +void xhci_queue_new_dequeue_state(struct xhci_hcd *xhci, + struct xhci_ring *ep_ring, unsigned int slot_id, + unsigned int ep_index, struct xhci_dequeue_state *deq_state); /* xHCI roothub code */ int xhci_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue, u16 wIndex, -- cgit v1.2.3 From 044dcc824a167e3d39ba69a49e2b723dd10678f6 Mon Sep 17 00:00:00 2001 From: Wolfram Sang Date: Sun, 26 Jul 2009 18:27:29 +0200 Subject: pata_pcmcia: add CNF-CDROM-ID Fixes this report: http://article.gmane.org/gmane.linux.kernel.pcmcia.devel/2228/ Reported-by: John McGrath Signed-off-by: Wolfram Sang Signed-off-by: Jeff Garzik --- drivers/ata/pata_pcmcia.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/ata/pata_pcmcia.c b/drivers/ata/pata_pcmcia.c index f4d009ed50a..dc99e26f8e5 100644 --- a/drivers/ata/pata_pcmcia.c +++ b/drivers/ata/pata_pcmcia.c @@ -411,6 +411,7 @@ static struct pcmcia_device_id pcmcia_devices[] = { PCMCIA_DEVICE_PROD_ID123("PCMCIA", "IDE CARD", "F1", 0x281f1c5d, 0x1907960c, 0xf7fde8b9), PCMCIA_DEVICE_PROD_ID12("ARGOSY", "CD-ROM", 0x78f308dc, 0x66536591), PCMCIA_DEVICE_PROD_ID12("ARGOSY", "PnPIDE", 0x78f308dc, 0x0c694728), + PCMCIA_DEVICE_PROD_ID12("CNF ", "CD-ROM", 0x46d7db81, 0x66536591), PCMCIA_DEVICE_PROD_ID12("CNF CD-M", "CD-ROM", 0x7d93b852, 0x66536591), PCMCIA_DEVICE_PROD_ID12("Creative Technology Ltd.", "PCMCIA CD-ROM Interface Card", 0xff8c8a45, 0xfe8020c4), PCMCIA_DEVICE_PROD_ID12("Digital Equipment Corporation.", "Digital Mobile Media CD-ROM", 0x17692a66, 0xef1dcbde), -- cgit v1.2.3 From 705d201414382b0966d7c903d738dfdb9380e4af Mon Sep 17 00:00:00 2001 From: Bartlomiej Zolnierkiewicz Date: Sun, 26 Jul 2009 16:21:01 +0200 Subject: libata: add missing NULL pointer check to ata_eh_reset() drivers/ata/libata-eh.c +2403 ata_eh_reset(80) warning: variable derefenced before check 'slave' Please note that this is _not_ a real bug at the moment since ata_eh_context structure is embedded into ata_list structure and the code alwas checks for 'slave' before accessing 'sehc'. Anyway lets add missing check and always have a valid 'sehc' pointer (which makes code easier to understand and prevents introducing some possible bugs in the future). Reported-by: Dan Carpenter Cc: corbet@lwn.net Cc: eteo@redhat.com Signed-off-by: Bartlomiej Zolnierkiewicz Signed-off-by: Jeff Garzik --- drivers/ata/libata-eh.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/ata/libata-eh.c b/drivers/ata/libata-eh.c index 1a07c061f64..79711b64054 100644 --- a/drivers/ata/libata-eh.c +++ b/drivers/ata/libata-eh.c @@ -2327,7 +2327,7 @@ int ata_eh_reset(struct ata_link *link, int classify, struct ata_port *ap = link->ap; struct ata_link *slave = ap->slave_link; struct ata_eh_context *ehc = &link->eh_context; - struct ata_eh_context *sehc = &slave->eh_context; + struct ata_eh_context *sehc = slave ? &slave->eh_context : NULL; unsigned int *classes = ehc->classes; unsigned int lflags = link->flags; int verbose = !(ehc->i.flags & ATA_EHI_QUIET); -- cgit v1.2.3 From c9abde12d6debe5b97f36fb43cf188c1b9cd477f Mon Sep 17 00:00:00 2001 From: Bartlomiej Zolnierkiewicz Date: Sun, 26 Jul 2009 16:05:13 +0200 Subject: libata: remove superfluous NULL pointer checks host->ports[] always contain pointers to valid port structures since a "dummy port" structure is used in case if there is no physical port. This patch takes care of two entries from Dan's list: drivers/ata/sata_sil.c +535 sil_interrupt(13) warning: variable derefenced before check 'ap' drivers/ata/sata_mv.c +2517 mv_unexpected_intr(6) warning: variable derefenced before check 'ap' and of another needless NULL pointer check in pata_octeon_cf.c. Reported-by: Dan Carpenter Cc: corbet@lwn.net Cc: eteo@redhat.com Signed-off-by: Bartlomiej Zolnierkiewicz Signed-off-by: Jeff Garzik --- drivers/ata/pata_octeon_cf.c | 3 ++- drivers/ata/sata_mv.c | 2 +- drivers/ata/sata_sil.c | 2 +- 3 files changed, 4 insertions(+), 3 deletions(-) diff --git a/drivers/ata/pata_octeon_cf.c b/drivers/ata/pata_octeon_cf.c index 8d9343accf3..abdd19fe990 100644 --- a/drivers/ata/pata_octeon_cf.c +++ b/drivers/ata/pata_octeon_cf.c @@ -653,7 +653,8 @@ static irqreturn_t octeon_cf_interrupt(int irq, void *dev_instance) ap = host->ports[i]; ocd = ap->dev->platform_data; - if (!ap || (ap->flags & ATA_FLAG_DISABLED)) + + if (ap->flags & ATA_FLAG_DISABLED) continue; ocd = ap->dev->platform_data; diff --git a/drivers/ata/sata_mv.c b/drivers/ata/sata_mv.c index 23714aefb82..c19417e0220 100644 --- a/drivers/ata/sata_mv.c +++ b/drivers/ata/sata_mv.c @@ -2514,7 +2514,7 @@ static void mv_unexpected_intr(struct ata_port *ap, int edma_was_enabled) char *when = "idle"; ata_ehi_clear_desc(ehi); - if (!ap || (ap->flags & ATA_FLAG_DISABLED)) { + if (ap->flags & ATA_FLAG_DISABLED) { when = "disabled"; } else if (edma_was_enabled) { when = "EDMA enabled"; diff --git a/drivers/ata/sata_sil.c b/drivers/ata/sata_sil.c index 030ec079b18..35bd5cc7f28 100644 --- a/drivers/ata/sata_sil.c +++ b/drivers/ata/sata_sil.c @@ -532,7 +532,7 @@ static irqreturn_t sil_interrupt(int irq, void *dev_instance) struct ata_port *ap = host->ports[i]; u32 bmdma2 = readl(mmio_base + sil_port[ap->port_no].bmdma2); - if (unlikely(!ap || ap->flags & ATA_FLAG_DISABLED)) + if (unlikely(ap->flags & ATA_FLAG_DISABLED)) continue; /* turn off SATA_IRQ if not supported */ -- cgit v1.2.3 From c1f57d9b9846e7366c328f916d1a82d03ba4312c Mon Sep 17 00:00:00 2001 From: David Milburn Date: Wed, 22 Jul 2009 15:15:56 -0500 Subject: ahci: add device IDs for Ibex Peak ahci controllers Add device IDS for Ibex Peak SATA AHCI Controllers Signed-off-by: Jaroslav Kysela Signed-off-by: David Milburn Signed-off-by: Jeff Garzik --- drivers/ata/ahci.c | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/drivers/ata/ahci.c b/drivers/ata/ahci.c index 336eb1ed73c..958c1fa4190 100644 --- a/drivers/ata/ahci.c +++ b/drivers/ata/ahci.c @@ -515,10 +515,14 @@ static const struct pci_device_id ahci_pci_tbl[] = { { PCI_VDEVICE(INTEL, 0x3a05), board_ahci }, /* ICH10 */ { PCI_VDEVICE(INTEL, 0x3a22), board_ahci }, /* ICH10 */ { PCI_VDEVICE(INTEL, 0x3a25), board_ahci }, /* ICH10 */ + { PCI_VDEVICE(INTEL, 0x3b22), board_ahci }, /* PCH AHCI */ + { PCI_VDEVICE(INTEL, 0x3b23), board_ahci }, /* PCH AHCI */ { PCI_VDEVICE(INTEL, 0x3b24), board_ahci }, /* PCH RAID */ { PCI_VDEVICE(INTEL, 0x3b25), board_ahci }, /* PCH RAID */ + { PCI_VDEVICE(INTEL, 0x3b29), board_ahci }, /* PCH AHCI */ { PCI_VDEVICE(INTEL, 0x3b2b), board_ahci }, /* PCH RAID */ { PCI_VDEVICE(INTEL, 0x3b2c), board_ahci }, /* PCH RAID */ + { PCI_VDEVICE(INTEL, 0x3b2f), board_ahci }, /* PCH AHCI */ /* JMicron 360/1/3/5/6, match class to avoid IDE function */ { PCI_VENDOR_ID_JMICRON, PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID, -- cgit v1.2.3 From 6034734d333c1bd01119a5b480b34a507a3adf56 Mon Sep 17 00:00:00 2001 From: Steve Conklin Date: Thu, 16 Jul 2009 16:27:56 -0500 Subject: ata_piix: Add new laptop short cable IDs OriginalAuthor: Michael Frey Signed-off-by: Steve Conklin Signed-off-by: Jeff Garzik --- drivers/ata/ata_piix.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/ata/ata_piix.c b/drivers/ata/ata_piix.c index d0a14cf2bd7..deada1fe6a0 100644 --- a/drivers/ata/ata_piix.c +++ b/drivers/ata/ata_piix.c @@ -596,9 +596,11 @@ static const struct ich_laptop ich_laptop[] = { { 0x27DF, 0x0005, 0x0280 }, /* ICH7 on Acer 5602WLMi */ { 0x27DF, 0x1025, 0x0102 }, /* ICH7 on Acer 5602aWLMi */ { 0x27DF, 0x1025, 0x0110 }, /* ICH7 on Acer 3682WLMi */ + { 0x27DF, 0x1028, 0x02b0 }, /* ICH7 on unknown Dell */ { 0x27DF, 0x1043, 0x1267 }, /* ICH7 on Asus W5F */ { 0x27DF, 0x103C, 0x30A1 }, /* ICH7 on HP Compaq nc2400 */ { 0x27DF, 0x1071, 0xD221 }, /* ICH7 on Hercules EC-900 */ + { 0x27DF, 0x152D, 0x0778 }, /* ICH7 on unknown Intel */ { 0x24CA, 0x1025, 0x0061 }, /* ICH4 on ACER Aspire 2023WLMi */ { 0x24CA, 0x1025, 0x003d }, /* ICH4 on ACER TM290 */ { 0x266F, 0x1025, 0x0066 }, /* ICH6 on ACER Aspire 1694WLMi */ -- cgit v1.2.3 From 760cdb7760be928e85a021552253eb1b39acdf37 Mon Sep 17 00:00:00 2001 From: Steve Conklin Date: Thu, 16 Jul 2009 16:31:10 -0500 Subject: ata_piix: Add new short cable ID OriginalAuthor: Tony Espy Signed-off-by: Steve Conklin Signed-off-by: Jeff Garzik --- drivers/ata/ata_piix.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/ata/ata_piix.c b/drivers/ata/ata_piix.c index deada1fe6a0..56b8a3ff128 100644 --- a/drivers/ata/ata_piix.c +++ b/drivers/ata/ata_piix.c @@ -599,6 +599,7 @@ static const struct ich_laptop ich_laptop[] = { { 0x27DF, 0x1028, 0x02b0 }, /* ICH7 on unknown Dell */ { 0x27DF, 0x1043, 0x1267 }, /* ICH7 on Asus W5F */ { 0x27DF, 0x103C, 0x30A1 }, /* ICH7 on HP Compaq nc2400 */ + { 0x27DF, 0x103C, 0x361a }, /* ICH7 on unkown HP */ { 0x27DF, 0x1071, 0xD221 }, /* ICH7 on Hercules EC-900 */ { 0x27DF, 0x152D, 0x0778 }, /* ICH7 on unknown Intel */ { 0x24CA, 0x1025, 0x0061 }, /* ICH4 on ACER Aspire 2023WLMi */ -- cgit v1.2.3 From 7d084d96fdf1d791cb171da57efc1ca89d68dd6c Mon Sep 17 00:00:00 2001 From: Sergey Matyukevich Date: Thu, 16 Jul 2009 22:38:55 +0400 Subject: libata: Updates and fixes for pata_at91 driver Please consider the following updates and fixes for pata_at91 driver. * Removed extra headers Here we need only static memory controller properties, which are contained in generic header at91sam9_smc.h. No need to include any specific headers for at91sam9260 SoC. * No harsh BUG_ON for get_clk in set_smc_timing function get_clk is now performed in driver probing function, probing fails if master clock is not available * Fixed uint/ulong mess in calc_mck_cycles function Signed-off-by: Sergey Matyukevich Signed-off-by: Jeff Garzik --- drivers/ata/pata_at91.c | 67 ++++++++++++++++++++++++++----------------------- 1 file changed, 36 insertions(+), 31 deletions(-) diff --git a/drivers/ata/pata_at91.c b/drivers/ata/pata_at91.c index 8561a9f195c..5702affcb32 100644 --- a/drivers/ata/pata_at91.c +++ b/drivers/ata/pata_at91.c @@ -26,9 +26,7 @@ #include #include -#include #include -#include #include #include @@ -44,65 +42,62 @@ struct at91_ide_info { unsigned long mode; unsigned int cs; + struct clk *mck; + void __iomem *ide_addr; void __iomem *alt_addr; }; -const struct ata_timing initial_timing = +static const struct ata_timing initial_timing = {XFER_PIO_0, 70, 290, 240, 600, 165, 150, 600, 0}; -static unsigned int calc_mck_cycles(unsigned int ns, unsigned int mck_hz) +static unsigned long calc_mck_cycles(unsigned long ns, unsigned long mck_hz) { unsigned long mul; - /* - * cycles = x [nsec] * f [Hz] / 10^9 [ns in sec] = - * x * (f / 1_000_000_000) = - * x * ((f * 65536) / 1_000_000_000) / 65536 = - * x * (((f / 10_000) * 65536) / 100_000) / 65536 = - */ + /* + * cycles = x [nsec] * f [Hz] / 10^9 [ns in sec] = + * x * (f / 1_000_000_000) = + * x * ((f * 65536) / 1_000_000_000) / 65536 = + * x * (((f / 10_000) * 65536) / 100_000) / 65536 = + */ - mul = (mck_hz / 10000) << 16; - mul /= 100000; + mul = (mck_hz / 10000) << 16; + mul /= 100000; - return (ns * mul + 65536) >> 16; /* rounding */ + return (ns * mul + 65536) >> 16; /* rounding */ } static void set_smc_mode(struct at91_ide_info *info) { - at91_sys_write(AT91_SMC_MODE(info->cs), info->mode); - return; + at91_sys_write(AT91_SMC_MODE(info->cs), info->mode); + return; } static void set_smc_timing(struct device *dev, struct at91_ide_info *info, const struct ata_timing *ata) { - int read_cycle, write_cycle, active, recover; - int nrd_setup, nrd_pulse, nrd_recover; - int nwe_setup, nwe_pulse; + unsigned long read_cycle, write_cycle, active, recover; + unsigned long nrd_setup, nrd_pulse, nrd_recover; + unsigned long nwe_setup, nwe_pulse; - int ncs_write_setup, ncs_write_pulse; - int ncs_read_setup, ncs_read_pulse; + unsigned long ncs_write_setup, ncs_write_pulse; + unsigned long ncs_read_setup, ncs_read_pulse; - unsigned int mck_hz; - struct clk *mck; + unsigned long mck_hz; read_cycle = ata->cyc8b; nrd_setup = ata->setup; nrd_pulse = ata->act8b; nrd_recover = ata->rec8b; - mck = clk_get(NULL, "mck"); - BUG_ON(IS_ERR(mck)); - mck_hz = clk_get_rate(mck); + mck_hz = clk_get_rate(info->mck); read_cycle = calc_mck_cycles(read_cycle, mck_hz); nrd_setup = calc_mck_cycles(nrd_setup, mck_hz); nrd_pulse = calc_mck_cycles(nrd_pulse, mck_hz); nrd_recover = calc_mck_cycles(nrd_recover, mck_hz); - clk_put(mck); - active = nrd_setup + nrd_pulse; recover = read_cycle - active; @@ -121,13 +116,13 @@ static void set_smc_timing(struct device *dev, ncs_write_setup = ncs_read_setup; ncs_write_pulse = ncs_read_pulse; - dev_dbg(dev, "ATA timings: nrd_setup = %d nrd_pulse = %d nrd_cycle = %d\n", + dev_dbg(dev, "ATA timings: nrd_setup = %lu nrd_pulse = %lu nrd_cycle = %lu\n", nrd_setup, nrd_pulse, read_cycle); - dev_dbg(dev, "ATA timings: nwe_setup = %d nwe_pulse = %d nwe_cycle = %d\n", + dev_dbg(dev, "ATA timings: nwe_setup = %lu nwe_pulse = %lu nwe_cycle = %lu\n", nwe_setup, nwe_pulse, write_cycle); - dev_dbg(dev, "ATA timings: ncs_read_setup = %d ncs_read_pulse = %d\n", + dev_dbg(dev, "ATA timings: ncs_read_setup = %lu ncs_read_pulse = %lu\n", ncs_read_setup, ncs_read_pulse); - dev_dbg(dev, "ATA timings: ncs_write_setup = %d ncs_write_pulse = %d\n", + dev_dbg(dev, "ATA timings: ncs_write_setup = %lu ncs_write_pulse = %lu\n", ncs_write_setup, ncs_write_pulse); at91_sys_write(AT91_SMC_SETUP(info->cs), @@ -217,6 +212,7 @@ static int __devinit pata_at91_probe(struct platform_device *pdev) struct resource *mem_res; struct ata_host *host; struct ata_port *ap; + int irq_flags = 0; int irq = 0; int ret; @@ -261,6 +257,13 @@ static int __devinit pata_at91_probe(struct platform_device *pdev) return -ENOMEM; } + info->mck = clk_get(NULL, "mck"); + + if (IS_ERR(info->mck)) { + dev_err(dev, "failed to get access to mck clock\n"); + return -ENODEV; + } + info->cs = board->chipselect; info->mode = AT91_SMC_READMODE | AT91_SMC_WRITEMODE | AT91_SMC_EXNWMODE_READY | AT91_SMC_BAT_SELECT | @@ -304,6 +307,7 @@ err_alt_ioremap: devm_iounmap(dev, info->ide_addr); err_ide_ioremap: + clk_put(info->mck); kfree(info); return ret; @@ -326,6 +330,7 @@ static int __devexit pata_at91_remove(struct platform_device *pdev) devm_iounmap(dev, info->ide_addr); devm_iounmap(dev, info->alt_addr); + clk_put(info->mck); kfree(info); return 0; -- cgit v1.2.3 From 5920dadfb4aec6c1372c5570e71bcd3b4837e63c Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Wed, 15 Jul 2009 17:11:41 +0900 Subject: libata: accept late unlocking of HPA On certain configurations, HPA isn't or can't be unlocked during probing but it somehow ends up unlocked afterwards. In the following thread, the problem can be reliably reproduced after resuming from STR. The BIOS turns on HPA during boot but forgets to do it during resume. http://thread.gmane.org/gmane.linux.kernel/858310 This patch updates libata revalidation such that it considers native n_sectors. If the device size has increased to match native n_sectors, it's assumed that HPA has been unlocked involuntarily and the device is recognized as the same one. This should be fairly safe while nicely working around the problem. Signed-off-by: Tejun Heo Reported-by: Christof Warlich Signed-off-by: Jeff Garzik --- drivers/ata/libata-core.c | 30 +++++++++++++++++++++++------- include/linux/libata.h | 1 + 2 files changed, 24 insertions(+), 7 deletions(-) diff --git a/drivers/ata/libata-core.c b/drivers/ata/libata-core.c index 2c6aedaef71..8ac98ff16d7 100644 --- a/drivers/ata/libata-core.c +++ b/drivers/ata/libata-core.c @@ -1515,6 +1515,7 @@ static int ata_hpa_resize(struct ata_device *dev) return rc; } + dev->n_native_sectors = native_sectors; /* nothing to do? */ if (native_sectors <= sectors || !ata_ignore_hpa) { @@ -4099,6 +4100,7 @@ int ata_dev_revalidate(struct ata_device *dev, unsigned int new_class, unsigned int readid_flags) { u64 n_sectors = dev->n_sectors; + u64 n_native_sectors = dev->n_native_sectors; int rc; if (!ata_dev_enabled(dev)) @@ -4128,16 +4130,30 @@ int ata_dev_revalidate(struct ata_device *dev, unsigned int new_class, /* verify n_sectors hasn't changed */ if (dev->class == ATA_DEV_ATA && n_sectors && dev->n_sectors != n_sectors) { - ata_dev_printk(dev, KERN_INFO, "n_sectors mismatch " + ata_dev_printk(dev, KERN_WARNING, "n_sectors mismatch " "%llu != %llu\n", (unsigned long long)n_sectors, (unsigned long long)dev->n_sectors); - - /* restore original n_sectors */ - dev->n_sectors = n_sectors; - - rc = -ENODEV; - goto fail; + /* + * Something could have caused HPA to be unlocked + * involuntarily. If n_native_sectors hasn't changed + * and the new size matches it, keep the device. + */ + if (dev->n_native_sectors == n_native_sectors && + dev->n_sectors > n_sectors && + dev->n_sectors == n_native_sectors) { + ata_dev_printk(dev, KERN_WARNING, + "new n_sectors matches native, probably " + "late HPA unlock, continuing\n"); + /* keep using the old n_sectors */ + dev->n_sectors = n_sectors; + } else { + /* restore original n_[native]_sectors and fail */ + dev->n_native_sectors = n_native_sectors; + dev->n_sectors = n_sectors; + rc = -ENODEV; + goto fail; + } } return 0; diff --git a/include/linux/libata.h b/include/linux/libata.h index 79b6d7fd4ac..e5b6e33c657 100644 --- a/include/linux/libata.h +++ b/include/linux/libata.h @@ -589,6 +589,7 @@ struct ata_device { #endif /* n_sector is CLEAR_BEGIN, read comment above CLEAR_BEGIN */ u64 n_sectors; /* size of device, if ATA */ + u64 n_native_sectors; /* native size, if ATA */ unsigned int class; /* ATA_DEV_xxx */ unsigned long unpark_deadline; -- cgit v1.2.3 From 68dbcb726e372b3c8ef60b79b5aff4174dd2bdf0 Mon Sep 17 00:00:00 2001 From: Jeff Garzik Date: Tue, 28 Jul 2009 22:36:59 -0400 Subject: Remove zero-length file drivers/char/vr41xx_giu.c Signed-off-by: Jeff Garzik --- drivers/char/vr41xx_giu.c | 0 1 file changed, 0 insertions(+), 0 deletions(-) delete mode 100644 drivers/char/vr41xx_giu.c diff --git a/drivers/char/vr41xx_giu.c b/drivers/char/vr41xx_giu.c deleted file mode 100644 index e69de29bb2d..00000000000 -- cgit v1.2.3 From e024e11070a0a0dc7163ce1ec2da354a638bdbed Mon Sep 17 00:00:00 2001 From: Dave Airlie Date: Wed, 24 Jun 2009 09:48:08 +1000 Subject: drm/radeon/kms: add initial colortiling support. MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit This adds new set/get tiling interfaces where the pitch and macro/micro tiling enables can be set. Along with a flag to decide if this object should have a surface when mapped. The only thing we need to allocate with a mapped surface should be the frontbuffer. Note rotate scanout shouldn't require one, and back/depth shouldn't either, though mesa needs some fixes. It fixes the TTM interfaces along Thomas's suggestions, and I've tested the surface stealing code with two X servers and not seen any lockdep issues. I've stopped tiling the fbcon frontbuffer, as I don't see there being any advantage other than testing, I've left the testing commands in there, just flip the fb_tiled to true in radeon_fb.c Open: Can we integrate endian swapping in with this? Future features: texture tiling - need to relocate texture registers TXOFFSET* with tiling info. This also merges Michel's cleanup surfaces regs at init time patch even though it makes sense on its own, this patch really relies on it. Some PowerMac firmwares set up a tiling surface at the beginning of VRAM which messes us up otherwise. that patch is: Signed-off-by: Michel Dänzer Signed-off-by: Dave Airlie --- drivers/gpu/drm/radeon/atombios_crtc.c | 11 ++- drivers/gpu/drm/radeon/r100.c | 79 ++++++++++++++++- drivers/gpu/drm/radeon/r300.c | 51 ++++++++++- drivers/gpu/drm/radeon/r300_reg.h | 4 +- drivers/gpu/drm/radeon/radeon.h | 32 ++++++- drivers/gpu/drm/radeon/radeon_asic.h | 19 ++++ drivers/gpu/drm/radeon/radeon_device.c | 2 + drivers/gpu/drm/radeon/radeon_fb.c | 12 ++- drivers/gpu/drm/radeon/radeon_gem.c | 41 +++++++++ drivers/gpu/drm/radeon/radeon_kms.c | 2 + drivers/gpu/drm/radeon/radeon_legacy_crtc.c | 15 ++-- drivers/gpu/drm/radeon/radeon_object.c | 130 ++++++++++++++++++++++++++++ drivers/gpu/drm/radeon/radeon_ttm.c | 2 + drivers/gpu/drm/ttm/ttm_bo.c | 5 +- drivers/gpu/drm/ttm/ttm_bo_vm.c | 3 + include/drm/radeon_drm.h | 23 ++++- include/drm/ttm/ttm_bo_driver.h | 15 ++++ 17 files changed, 427 insertions(+), 19 deletions(-) diff --git a/drivers/gpu/drm/radeon/atombios_crtc.c b/drivers/gpu/drm/radeon/atombios_crtc.c index e64a199b5ee..eac26cdb5da 100644 --- a/drivers/gpu/drm/radeon/atombios_crtc.c +++ b/drivers/gpu/drm/radeon/atombios_crtc.c @@ -327,7 +327,7 @@ int atombios_crtc_set_base(struct drm_crtc *crtc, int x, int y, struct drm_gem_object *obj; struct drm_radeon_gem_object *obj_priv; uint64_t fb_location; - uint32_t fb_format, fb_pitch_pixels; + uint32_t fb_format, fb_pitch_pixels, tiling_flags; if (!crtc->fb) return -EINVAL; @@ -364,7 +364,14 @@ int atombios_crtc_set_base(struct drm_crtc *crtc, int x, int y, return -EINVAL; } - /* TODO tiling */ + radeon_object_get_tiling_flags(obj->driver_private, + &tiling_flags, NULL); + if (tiling_flags & RADEON_TILING_MACRO) + fb_format |= AVIVO_D1GRPH_MACRO_ADDRESS_MODE; + + if (tiling_flags & RADEON_TILING_MICRO) + fb_format |= AVIVO_D1GRPH_TILED; + if (radeon_crtc->crtc_id == 0) WREG32(AVIVO_D1VGA_CONTROL, 0); else diff --git a/drivers/gpu/drm/radeon/r100.c b/drivers/gpu/drm/radeon/r100.c index 0d05909f03f..69bd7cb5997 100644 --- a/drivers/gpu/drm/radeon/r100.c +++ b/drivers/gpu/drm/radeon/r100.c @@ -909,6 +909,7 @@ static int r100_packet0_check(struct radeon_cs_parser *p, unsigned idx; bool onereg; int r; + u32 tile_flags = 0; ib = p->ib->ptr; ib_chunk = &p->chunks[p->chunk_ib_idx]; @@ -942,7 +943,20 @@ static int r100_packet0_check(struct radeon_cs_parser *p, } tmp = ib_chunk->kdata[idx] & 0x003fffff; tmp += (((u32)reloc->lobj.gpu_offset) >> 10); - ib[idx] = (ib_chunk->kdata[idx] & 0xffc00000) | tmp; + + if (reloc->lobj.tiling_flags & RADEON_TILING_MACRO) + tile_flags |= RADEON_DST_TILE_MACRO; + if (reloc->lobj.tiling_flags & RADEON_TILING_MICRO) { + if (reg == RADEON_SRC_PITCH_OFFSET) { + DRM_ERROR("Cannot src blit from microtiled surface\n"); + r100_cs_dump_packet(p, pkt); + return -EINVAL; + } + tile_flags |= RADEON_DST_TILE_MICRO; + } + + tmp |= tile_flags; + ib[idx] = (ib_chunk->kdata[idx] & 0x3fc00000) | tmp; break; case RADEON_RB3D_DEPTHOFFSET: case RADEON_RB3D_COLOROFFSET: @@ -987,6 +1001,25 @@ static int r100_packet0_check(struct radeon_cs_parser *p, } ib[idx] = ib_chunk->kdata[idx] + ((u32)reloc->lobj.gpu_offset); break; + case R300_RB3D_COLORPITCH0: + case RADEON_RB3D_COLORPITCH: + r = r100_cs_packet_next_reloc(p, &reloc); + if (r) { + DRM_ERROR("No reloc for ib[%d]=0x%04X\n", + idx, reg); + r100_cs_dump_packet(p, pkt); + return r; + } + + if (reloc->lobj.tiling_flags & RADEON_TILING_MACRO) + tile_flags |= RADEON_COLOR_TILE_ENABLE; + if (reloc->lobj.tiling_flags & RADEON_TILING_MICRO) + tile_flags |= RADEON_COLOR_MICROTILE_ENABLE; + + tmp = ib_chunk->kdata[idx] & ~(0x7 << 16); + tmp |= tile_flags; + ib[idx] = tmp; + break; default: /* FIXME: we don't want to allow anyothers packet */ break; @@ -1707,3 +1740,47 @@ int r100_debugfs_mc_info_init(struct radeon_device *rdev) return 0; #endif } + +int r100_set_surface_reg(struct radeon_device *rdev, int reg, + uint32_t tiling_flags, uint32_t pitch, + uint32_t offset, uint32_t obj_size) +{ + int surf_index = reg * 16; + int flags = 0; + + /* r100/r200 divide by 16 */ + if (rdev->family < CHIP_R300) + flags = pitch / 16; + else + flags = pitch / 8; + + if (rdev->family <= CHIP_RS200) { + if ((tiling_flags & (RADEON_TILING_MACRO|RADEON_TILING_MICRO)) + == (RADEON_TILING_MACRO|RADEON_TILING_MICRO)) + flags |= RADEON_SURF_TILE_COLOR_BOTH; + if (tiling_flags & RADEON_TILING_MACRO) + flags |= RADEON_SURF_TILE_COLOR_MACRO; + } else if (rdev->family <= CHIP_RV280) { + if (tiling_flags & (RADEON_TILING_MACRO)) + flags |= R200_SURF_TILE_COLOR_MACRO; + if (tiling_flags & RADEON_TILING_MICRO) + flags |= R200_SURF_TILE_COLOR_MICRO; + } else { + if (tiling_flags & RADEON_TILING_MACRO) + flags |= R300_SURF_TILE_MACRO; + if (tiling_flags & RADEON_TILING_MICRO) + flags |= R300_SURF_TILE_MICRO; + } + + DRM_DEBUG("writing surface %d %d %x %x\n", reg, flags, offset, offset+obj_size-1); + WREG32(RADEON_SURFACE0_INFO + surf_index, flags); + WREG32(RADEON_SURFACE0_LOWER_BOUND + surf_index, offset); + WREG32(RADEON_SURFACE0_UPPER_BOUND + surf_index, offset + obj_size - 1); + return 0; +} + +void r100_clear_surface_reg(struct radeon_device *rdev, int reg) +{ + int surf_index = reg * 16; + WREG32(RADEON_SURFACE0_INFO + surf_index, 0); +} diff --git a/drivers/gpu/drm/radeon/r300.c b/drivers/gpu/drm/radeon/r300.c index 0e0e094da50..28e5777658b 100644 --- a/drivers/gpu/drm/radeon/r300.c +++ b/drivers/gpu/drm/radeon/r300.c @@ -30,6 +30,7 @@ #include "drm.h" #include "radeon_reg.h" #include "radeon.h" +#include "radeon_drm.h" /* r300,r350,rv350,rv370,rv380 depends on : */ void r100_hdp_reset(struct radeon_device *rdev); @@ -1023,7 +1024,7 @@ static int r300_packet0_check(struct radeon_cs_parser *p, struct radeon_cs_reloc *reloc; struct r300_cs_track *track; volatile uint32_t *ib; - uint32_t tmp; + uint32_t tmp, tile_flags = 0; unsigned i; int r; @@ -1052,7 +1053,19 @@ static int r300_packet0_check(struct radeon_cs_parser *p, } tmp = ib_chunk->kdata[idx] & 0x003fffff; tmp += (((u32)reloc->lobj.gpu_offset) >> 10); - ib[idx] = (ib_chunk->kdata[idx] & 0xffc00000) | tmp; + + if (reloc->lobj.tiling_flags & RADEON_TILING_MACRO) + tile_flags |= RADEON_DST_TILE_MACRO; + if (reloc->lobj.tiling_flags & RADEON_TILING_MICRO) { + if (reg == RADEON_SRC_PITCH_OFFSET) { + DRM_ERROR("Cannot src blit from microtiled surface\n"); + r100_cs_dump_packet(p, pkt); + return -EINVAL; + } + tile_flags |= RADEON_DST_TILE_MICRO; + } + tmp |= tile_flags; + ib[idx] = (ib_chunk->kdata[idx] & 0x3fc00000) | tmp; break; case R300_RB3D_COLOROFFSET0: case R300_RB3D_COLOROFFSET1: @@ -1141,6 +1154,23 @@ static int r300_packet0_check(struct radeon_cs_parser *p, /* RB3D_COLORPITCH1 */ /* RB3D_COLORPITCH2 */ /* RB3D_COLORPITCH3 */ + r = r100_cs_packet_next_reloc(p, &reloc); + if (r) { + DRM_ERROR("No reloc for ib[%d]=0x%04X\n", + idx, reg); + r100_cs_dump_packet(p, pkt); + return r; + } + + if (reloc->lobj.tiling_flags & RADEON_TILING_MACRO) + tile_flags |= R300_COLOR_TILE_ENABLE; + if (reloc->lobj.tiling_flags & RADEON_TILING_MICRO) + tile_flags |= R300_COLOR_MICROTILE_ENABLE; + + tmp = ib_chunk->kdata[idx] & ~(0x7 << 16); + tmp |= tile_flags; + ib[idx] = tmp; + i = (reg - 0x4E38) >> 2; track->cb[i].pitch = ib_chunk->kdata[idx] & 0x3FFE; switch (((ib_chunk->kdata[idx] >> 21) & 0xF)) { @@ -1196,6 +1226,23 @@ static int r300_packet0_check(struct radeon_cs_parser *p, break; case 0x4F24: /* ZB_DEPTHPITCH */ + r = r100_cs_packet_next_reloc(p, &reloc); + if (r) { + DRM_ERROR("No reloc for ib[%d]=0x%04X\n", + idx, reg); + r100_cs_dump_packet(p, pkt); + return r; + } + + if (reloc->lobj.tiling_flags & RADEON_TILING_MACRO) + tile_flags |= R300_DEPTHMACROTILE_ENABLE; + if (reloc->lobj.tiling_flags & RADEON_TILING_MICRO) + tile_flags |= R300_DEPTHMICROTILE_TILED;; + + tmp = ib_chunk->kdata[idx] & ~(0x7 << 16); + tmp |= tile_flags; + ib[idx] = tmp; + track->zb.pitch = ib_chunk->kdata[idx] & 0x3FFC; break; case 0x4104: diff --git a/drivers/gpu/drm/radeon/r300_reg.h b/drivers/gpu/drm/radeon/r300_reg.h index 70f48609515..4b7afef35a6 100644 --- a/drivers/gpu/drm/radeon/r300_reg.h +++ b/drivers/gpu/drm/radeon/r300_reg.h @@ -27,7 +27,9 @@ #ifndef _R300_REG_H_ #define _R300_REG_H_ - +#define R300_SURF_TILE_MACRO (1<<16) +#define R300_SURF_TILE_MICRO (2<<16) +#define R300_SURF_TILE_BOTH (3<<16) #define R300_MC_INIT_MISC_LAT_TIMER 0x180 diff --git a/drivers/gpu/drm/radeon/radeon.h b/drivers/gpu/drm/radeon/radeon.h index 7f007185e7f..af12a2fe322 100644 --- a/drivers/gpu/drm/radeon/radeon.h +++ b/drivers/gpu/drm/radeon/radeon.h @@ -201,6 +201,14 @@ int radeon_fence_wait_last(struct radeon_device *rdev); struct radeon_fence *radeon_fence_ref(struct radeon_fence *fence); void radeon_fence_unref(struct radeon_fence **fence); +/* + * Tiling registers + */ +struct radeon_surface_reg { + struct radeon_object *robj; +}; + +#define RADEON_GEM_MAX_SURFACES 8 /* * Radeon buffer. @@ -213,6 +221,7 @@ struct radeon_object_list { uint64_t gpu_offset; unsigned rdomain; unsigned wdomain; + uint32_t tiling_flags; }; int radeon_object_init(struct radeon_device *rdev); @@ -242,8 +251,15 @@ void radeon_object_list_clean(struct list_head *head); int radeon_object_fbdev_mmap(struct radeon_object *robj, struct vm_area_struct *vma); unsigned long radeon_object_size(struct radeon_object *robj); - - +void radeon_object_clear_surface_reg(struct radeon_object *robj); +int radeon_object_check_tiling(struct radeon_object *robj, bool has_moved, + bool force_drop); +void radeon_object_set_tiling_flags(struct radeon_object *robj, + uint32_t tiling_flags, uint32_t pitch); +void radeon_object_get_tiling_flags(struct radeon_object *robj, uint32_t *tiling_flags, uint32_t *pitch); +void radeon_bo_move_notify(struct ttm_buffer_object *bo, + struct ttm_mem_reg *mem); +void radeon_bo_fault_reserve_notify(struct ttm_buffer_object *bo); /* * GEM objects. */ @@ -535,6 +551,11 @@ struct radeon_asic { void (*set_memory_clock)(struct radeon_device *rdev, uint32_t mem_clock); void (*set_pcie_lanes)(struct radeon_device *rdev, int lanes); void (*set_clock_gating)(struct radeon_device *rdev, int enable); + + int (*set_surface_reg)(struct radeon_device *rdev, int reg, + uint32_t tiling_flags, uint32_t pitch, + uint32_t offset, uint32_t obj_size); + int (*clear_surface_reg)(struct radeon_device *rdev, int reg); }; union radeon_asic_config { @@ -568,6 +589,10 @@ int radeon_gem_busy_ioctl(struct drm_device *dev, void *data, int radeon_gem_wait_idle_ioctl(struct drm_device *dev, void *data, struct drm_file *filp); int radeon_cs_ioctl(struct drm_device *dev, void *data, struct drm_file *filp); +int radeon_gem_set_tiling_ioctl(struct drm_device *dev, void *data, + struct drm_file *filp); +int radeon_gem_get_tiling_ioctl(struct drm_device *dev, void *data, + struct drm_file *filp); /* @@ -627,6 +652,7 @@ struct radeon_device { bool shutdown; bool suspend; bool need_dma32; + struct radeon_surface_reg surface_regs[RADEON_GEM_MAX_SURFACES]; }; int radeon_device_init(struct radeon_device *rdev, @@ -801,5 +827,7 @@ static inline void radeon_ring_write(struct radeon_device *rdev, uint32_t v) #define radeon_set_memory_clock(rdev, e) (rdev)->asic->set_engine_clock((rdev), (e)) #define radeon_set_pcie_lanes(rdev, l) (rdev)->asic->set_pcie_lanes((rdev), (l)) #define radeon_set_clock_gating(rdev, e) (rdev)->asic->set_clock_gating((rdev), (e)) +#define radeon_set_surface_reg(rdev, r, f, p, o, s) ((rdev)->asic->set_surface_reg((rdev), (r), (f), (p), (o), (s))) +#define radeon_clear_surface_reg(rdev, r) ((rdev)->asic->clear_surface_reg((rdev), (r))) #endif diff --git a/drivers/gpu/drm/radeon/radeon_asic.h b/drivers/gpu/drm/radeon/radeon_asic.h index e2e567395df..dd903d32940 100644 --- a/drivers/gpu/drm/radeon/radeon_asic.h +++ b/drivers/gpu/drm/radeon/radeon_asic.h @@ -71,6 +71,10 @@ int r100_copy_blit(struct radeon_device *rdev, uint64_t dst_offset, unsigned num_pages, struct radeon_fence *fence); +int r100_set_surface_reg(struct radeon_device *rdev, int reg, + uint32_t tiling_flags, uint32_t pitch, + uint32_t offset, uint32_t obj_size); +int r100_clear_surface_reg(struct radeon_device *rdev, int reg); static struct radeon_asic r100_asic = { .init = &r100_init, @@ -100,6 +104,8 @@ static struct radeon_asic r100_asic = { .set_memory_clock = NULL, .set_pcie_lanes = NULL, .set_clock_gating = &radeon_legacy_set_clock_gating, + .set_surface_reg = r100_set_surface_reg, + .clear_surface_reg = r100_clear_surface_reg, }; @@ -128,6 +134,7 @@ int r300_copy_dma(struct radeon_device *rdev, uint64_t dst_offset, unsigned num_pages, struct radeon_fence *fence); + static struct radeon_asic r300_asic = { .init = &r300_init, .errata = &r300_errata, @@ -156,6 +163,8 @@ static struct radeon_asic r300_asic = { .set_memory_clock = NULL, .set_pcie_lanes = &rv370_set_pcie_lanes, .set_clock_gating = &radeon_legacy_set_clock_gating, + .set_surface_reg = r100_set_surface_reg, + .clear_surface_reg = r100_clear_surface_reg, }; /* @@ -193,6 +202,8 @@ static struct radeon_asic r420_asic = { .set_memory_clock = &radeon_atom_set_memory_clock, .set_pcie_lanes = &rv370_set_pcie_lanes, .set_clock_gating = &radeon_atom_set_clock_gating, + .set_surface_reg = r100_set_surface_reg, + .clear_surface_reg = r100_clear_surface_reg, }; @@ -237,6 +248,8 @@ static struct radeon_asic rs400_asic = { .set_memory_clock = NULL, .set_pcie_lanes = NULL, .set_clock_gating = &radeon_legacy_set_clock_gating, + .set_surface_reg = r100_set_surface_reg, + .clear_surface_reg = r100_clear_surface_reg, }; @@ -322,6 +335,8 @@ static struct radeon_asic rs690_asic = { .set_memory_clock = &radeon_atom_set_memory_clock, .set_pcie_lanes = NULL, .set_clock_gating = &radeon_atom_set_clock_gating, + .set_surface_reg = r100_set_surface_reg, + .clear_surface_reg = r100_clear_surface_reg, }; @@ -367,6 +382,8 @@ static struct radeon_asic rv515_asic = { .set_memory_clock = &radeon_atom_set_memory_clock, .set_pcie_lanes = &rv370_set_pcie_lanes, .set_clock_gating = &radeon_atom_set_clock_gating, + .set_surface_reg = r100_set_surface_reg, + .clear_surface_reg = r100_clear_surface_reg, }; @@ -405,6 +422,8 @@ static struct radeon_asic r520_asic = { .set_memory_clock = &radeon_atom_set_memory_clock, .set_pcie_lanes = &rv370_set_pcie_lanes, .set_clock_gating = &radeon_atom_set_clock_gating, + .set_surface_reg = r100_set_surface_reg, + .clear_surface_reg = r100_clear_surface_reg, }; /* diff --git a/drivers/gpu/drm/radeon/radeon_device.c b/drivers/gpu/drm/radeon/radeon_device.c index cdef6eb01ba..f23083bbba3 100644 --- a/drivers/gpu/drm/radeon/radeon_device.c +++ b/drivers/gpu/drm/radeon/radeon_device.c @@ -48,6 +48,8 @@ static void radeon_surface_init(struct radeon_device *rdev) i * (RADEON_SURFACE1_INFO - RADEON_SURFACE0_INFO), 0); } + /* enable surfaces */ + WREG32(RADEON_SURFACE_CNTL, 0); } } diff --git a/drivers/gpu/drm/radeon/radeon_fb.c b/drivers/gpu/drm/radeon/radeon_fb.c index 260870a29d8..36d2f5588f2 100644 --- a/drivers/gpu/drm/radeon/radeon_fb.c +++ b/drivers/gpu/drm/radeon/radeon_fb.c @@ -471,10 +471,10 @@ static struct notifier_block paniced = { .notifier_call = radeonfb_panic, }; -static int radeon_align_pitch(struct radeon_device *rdev, int width, int bpp) +static int radeon_align_pitch(struct radeon_device *rdev, int width, int bpp, bool tiled) { int aligned = width; - int align_large = (ASIC_IS_AVIVO(rdev)); + int align_large = (ASIC_IS_AVIVO(rdev)) || tiled; int pitch_mask = 0; switch (bpp / 8) { @@ -512,12 +512,13 @@ int radeonfb_create(struct radeon_device *rdev, u64 fb_gpuaddr; void *fbptr = NULL; unsigned long tmp; + bool fb_tiled = false; /* useful for testing */ mode_cmd.width = surface_width; mode_cmd.height = surface_height; mode_cmd.bpp = 32; /* need to align pitch with crtc limits */ - mode_cmd.pitch = radeon_align_pitch(rdev, mode_cmd.width, mode_cmd.bpp) * ((mode_cmd.bpp + 1) / 8); + mode_cmd.pitch = radeon_align_pitch(rdev, mode_cmd.width, mode_cmd.bpp, fb_tiled) * ((mode_cmd.bpp + 1) / 8); mode_cmd.depth = 24; size = mode_cmd.pitch * mode_cmd.height; @@ -535,6 +536,8 @@ int radeonfb_create(struct radeon_device *rdev, } robj = gobj->driver_private; + if (fb_tiled) + radeon_object_set_tiling_flags(robj, RADEON_TILING_MACRO|RADEON_TILING_SURFACE, mode_cmd.pitch); mutex_lock(&rdev->ddev->struct_mutex); fb = radeon_framebuffer_create(rdev->ddev, &mode_cmd, gobj); if (fb == NULL) { @@ -563,6 +566,9 @@ int radeonfb_create(struct radeon_device *rdev, } rfbdev = info->par; + if (fb_tiled) + radeon_object_check_tiling(robj, 0, 0); + ret = radeon_object_kmap(robj, &fbptr); if (ret) { goto out_unref; diff --git a/drivers/gpu/drm/radeon/radeon_gem.c b/drivers/gpu/drm/radeon/radeon_gem.c index eb516034235..12542087b29 100644 --- a/drivers/gpu/drm/radeon/radeon_gem.c +++ b/drivers/gpu/drm/radeon/radeon_gem.c @@ -285,3 +285,44 @@ int radeon_gem_wait_idle_ioctl(struct drm_device *dev, void *data, mutex_unlock(&dev->struct_mutex); return r; } + +int radeon_gem_set_tiling_ioctl(struct drm_device *dev, void *data, + struct drm_file *filp) +{ + struct drm_radeon_gem_set_tiling *args = data; + struct drm_gem_object *gobj; + struct radeon_object *robj; + int r = 0; + + DRM_DEBUG("%d \n", args->handle); + gobj = drm_gem_object_lookup(dev, filp, args->handle); + if (gobj == NULL) + return -EINVAL; + robj = gobj->driver_private; + radeon_object_set_tiling_flags(robj, args->tiling_flags, args->pitch); + mutex_lock(&dev->struct_mutex); + drm_gem_object_unreference(gobj); + mutex_unlock(&dev->struct_mutex); + return r; +} + +int radeon_gem_get_tiling_ioctl(struct drm_device *dev, void *data, + struct drm_file *filp) +{ + struct drm_radeon_gem_get_tiling *args = data; + struct drm_gem_object *gobj; + struct radeon_object *robj; + int r = 0; + + DRM_DEBUG("\n"); + gobj = drm_gem_object_lookup(dev, filp, args->handle); + if (gobj == NULL) + return -EINVAL; + robj = gobj->driver_private; + radeon_object_get_tiling_flags(robj, &args->tiling_flags, + &args->pitch); + mutex_lock(&dev->struct_mutex); + drm_gem_object_unreference(gobj); + mutex_unlock(&dev->struct_mutex); + return r; +} diff --git a/drivers/gpu/drm/radeon/radeon_kms.c b/drivers/gpu/drm/radeon/radeon_kms.c index 4612a7c146d..937a2f1cdb4 100644 --- a/drivers/gpu/drm/radeon/radeon_kms.c +++ b/drivers/gpu/drm/radeon/radeon_kms.c @@ -291,5 +291,7 @@ struct drm_ioctl_desc radeon_ioctls_kms[] = { DRM_IOCTL_DEF(DRM_RADEON_GEM_WAIT_IDLE, radeon_gem_wait_idle_ioctl, DRM_AUTH), DRM_IOCTL_DEF(DRM_RADEON_CS, radeon_cs_ioctl, DRM_AUTH), DRM_IOCTL_DEF(DRM_RADEON_INFO, radeon_info_ioctl, DRM_AUTH), + DRM_IOCTL_DEF(DRM_RADEON_GEM_SET_TILING, radeon_gem_set_tiling_ioctl, DRM_AUTH), + DRM_IOCTL_DEF(DRM_RADEON_GEM_GET_TILING, radeon_gem_get_tiling_ioctl, DRM_AUTH), }; int radeon_max_kms_ioctl = DRM_ARRAY_SIZE(radeon_ioctls_kms); diff --git a/drivers/gpu/drm/radeon/radeon_legacy_crtc.c b/drivers/gpu/drm/radeon/radeon_legacy_crtc.c index 14c1a5107fc..0613790e2a5 100644 --- a/drivers/gpu/drm/radeon/radeon_legacy_crtc.c +++ b/drivers/gpu/drm/radeon/radeon_legacy_crtc.c @@ -235,6 +235,7 @@ int radeon_crtc_set_base(struct drm_crtc *crtc, int x, int y, uint64_t base; uint32_t crtc_offset, crtc_offset_cntl, crtc_tile_x0_y0 = 0; uint32_t crtc_pitch, pitch_pixels; + uint32_t tiling_flags; DRM_DEBUG("\n"); @@ -258,8 +259,12 @@ int radeon_crtc_set_base(struct drm_crtc *crtc, int x, int y, (crtc->fb->bits_per_pixel * 8)); crtc_pitch |= crtc_pitch << 16; - /* TODO tiling */ - if (0) { + radeon_object_get_tiling_flags(obj->driver_private, + &tiling_flags, NULL); + if (tiling_flags & RADEON_TILING_MICRO) + DRM_ERROR("trying to scanout microtiled buffer\n"); + + if (tiling_flags & RADEON_TILING_MACRO) { if (ASIC_IS_R300(rdev)) crtc_offset_cntl |= (R300_CRTC_X_Y_MODE_EN | R300_CRTC_MICRO_TILE_BUFFER_DIS | @@ -275,15 +280,13 @@ int radeon_crtc_set_base(struct drm_crtc *crtc, int x, int y, crtc_offset_cntl &= ~RADEON_CRTC_TILE_EN; } - - /* TODO more tiling */ - if (0) { + if (tiling_flags & RADEON_TILING_MACRO) { if (ASIC_IS_R300(rdev)) { crtc_tile_x0_y0 = x | (y << 16); base &= ~0x7ff; } else { int byteshift = crtc->fb->bits_per_pixel >> 4; - int tile_addr = (((y >> 3) * crtc->fb->width + x) >> (8 - byteshift)) << 11; + int tile_addr = (((y >> 3) * pitch_pixels + x) >> (8 - byteshift)) << 11; base += tile_addr + ((x << byteshift) % 256) + ((y % 8) << 8); crtc_offset_cntl |= (y % 16); } diff --git a/drivers/gpu/drm/radeon/radeon_object.c b/drivers/gpu/drm/radeon/radeon_object.c index bac0d06c52a..d5b1fd562d8 100644 --- a/drivers/gpu/drm/radeon/radeon_object.c +++ b/drivers/gpu/drm/radeon/radeon_object.c @@ -44,6 +44,9 @@ struct radeon_object { uint64_t gpu_addr; void *kptr; bool is_iomem; + uint32_t tiling_flags; + uint32_t pitch; + int surface_reg; }; int radeon_ttm_init(struct radeon_device *rdev); @@ -70,6 +73,7 @@ static void radeon_ttm_object_object_destroy(struct ttm_buffer_object *tobj) robj = container_of(tobj, struct radeon_object, tobj); list_del_init(&robj->list); + radeon_object_clear_surface_reg(robj); kfree(robj); } @@ -141,6 +145,7 @@ int radeon_object_create(struct radeon_device *rdev, } robj->rdev = rdev; robj->gobj = gobj; + robj->surface_reg = -1; INIT_LIST_HEAD(&robj->list); flags = radeon_object_flags_from_domain(domain); @@ -435,6 +440,7 @@ int radeon_object_list_validate(struct list_head *head, void *fence) radeon_object_gpu_addr(robj); } lobj->gpu_offset = robj->gpu_addr; + lobj->tiling_flags = robj->tiling_flags; if (fence) { old_fence = (struct radeon_fence *)robj->tobj.sync_obj; robj->tobj.sync_obj = radeon_fence_ref(fence); @@ -479,3 +485,127 @@ unsigned long radeon_object_size(struct radeon_object *robj) { return robj->tobj.num_pages << PAGE_SHIFT; } + +int radeon_object_get_surface_reg(struct radeon_object *robj) +{ + struct radeon_device *rdev = robj->rdev; + struct radeon_surface_reg *reg; + struct radeon_object *old_object; + int steal; + int i; + + if (!robj->tiling_flags) + return 0; + + if (robj->surface_reg >= 0) { + reg = &rdev->surface_regs[robj->surface_reg]; + i = robj->surface_reg; + goto out; + } + + steal = -1; + for (i = 0; i < RADEON_GEM_MAX_SURFACES; i++) { + + reg = &rdev->surface_regs[i]; + if (!reg->robj) + break; + + old_object = reg->robj; + if (old_object->pin_count == 0) + steal = i; + } + + /* if we are all out */ + if (i == RADEON_GEM_MAX_SURFACES) { + if (steal == -1) + return -ENOMEM; + /* find someone with a surface reg and nuke their BO */ + reg = &rdev->surface_regs[steal]; + old_object = reg->robj; + /* blow away the mapping */ + DRM_DEBUG("stealing surface reg %d from %p\n", steal, old_object); + ttm_bo_unmap_virtual(&old_object->tobj); + old_object->surface_reg = -1; + i = steal; + } + + robj->surface_reg = i; + reg->robj = robj; + +out: + radeon_set_surface_reg(rdev, i, robj->tiling_flags, robj->pitch, + robj->tobj.mem.mm_node->start << PAGE_SHIFT, + robj->tobj.num_pages << PAGE_SHIFT); + return 0; +} + +void radeon_object_clear_surface_reg(struct radeon_object *robj) +{ + struct radeon_device *rdev = robj->rdev; + struct radeon_surface_reg *reg; + + if (robj->surface_reg == -1) + return; + + reg = &rdev->surface_regs[robj->surface_reg]; + radeon_clear_surface_reg(rdev, robj->surface_reg); + + reg->robj = NULL; + robj->surface_reg = -1; +} + +void radeon_object_set_tiling_flags(struct radeon_object *robj, + uint32_t tiling_flags, uint32_t pitch) +{ + robj->tiling_flags = tiling_flags; + robj->pitch = pitch; +} + +void radeon_object_get_tiling_flags(struct radeon_object *robj, + uint32_t *tiling_flags, + uint32_t *pitch) +{ + if (tiling_flags) + *tiling_flags = robj->tiling_flags; + if (pitch) + *pitch = robj->pitch; +} + +int radeon_object_check_tiling(struct radeon_object *robj, bool has_moved, + bool force_drop) +{ + if (!(robj->tiling_flags & RADEON_TILING_SURFACE)) + return 0; + + if (force_drop) { + radeon_object_clear_surface_reg(robj); + return 0; + } + + if (robj->tobj.mem.mem_type != TTM_PL_VRAM) { + if (!has_moved) + return 0; + + if (robj->surface_reg >= 0) + radeon_object_clear_surface_reg(robj); + return 0; + } + + if ((robj->surface_reg >= 0) && !has_moved) + return 0; + + return radeon_object_get_surface_reg(robj); +} + +void radeon_bo_move_notify(struct ttm_buffer_object *bo, + struct ttm_mem_reg *mem) +{ + struct radeon_object *robj = container_of(bo, struct radeon_object, tobj); + radeon_object_check_tiling(robj, 0, 1); +} + +void radeon_bo_fault_reserve_notify(struct ttm_buffer_object *bo) +{ + struct radeon_object *robj = container_of(bo, struct radeon_object, tobj); + radeon_object_check_tiling(robj, 0, 0); +} diff --git a/drivers/gpu/drm/radeon/radeon_ttm.c b/drivers/gpu/drm/radeon/radeon_ttm.c index 4ca9aa9203d..37e1cbcce3a 100644 --- a/drivers/gpu/drm/radeon/radeon_ttm.c +++ b/drivers/gpu/drm/radeon/radeon_ttm.c @@ -429,6 +429,8 @@ static struct ttm_bo_driver radeon_bo_driver = { .sync_obj_flush = &radeon_sync_obj_flush, .sync_obj_unref = &radeon_sync_obj_unref, .sync_obj_ref = &radeon_sync_obj_ref, + .move_notify = &radeon_bo_move_notify, + .fault_reserve_notify = &radeon_bo_fault_reserve_notify, }; int radeon_ttm_init(struct radeon_device *rdev) diff --git a/drivers/gpu/drm/ttm/ttm_bo.c b/drivers/gpu/drm/ttm/ttm_bo.c index e55e7972c89..6538d423698 100644 --- a/drivers/gpu/drm/ttm/ttm_bo.c +++ b/drivers/gpu/drm/ttm/ttm_bo.c @@ -43,7 +43,6 @@ #define TTM_BO_HASH_ORDER 13 static int ttm_bo_setup_vm(struct ttm_buffer_object *bo); -static void ttm_bo_unmap_virtual(struct ttm_buffer_object *bo); static int ttm_bo_swapout(struct ttm_mem_shrink *shrink); static inline uint32_t ttm_bo_type_flags(unsigned type) @@ -307,6 +306,9 @@ static int ttm_bo_handle_move_mem(struct ttm_buffer_object *bo, } + if (bdev->driver->move_notify) + bdev->driver->move_notify(bo, mem); + if (!(old_man->flags & TTM_MEMTYPE_FLAG_FIXED) && !(new_man->flags & TTM_MEMTYPE_FLAG_FIXED)) ret = ttm_bo_move_ttm(bo, evict, no_wait, mem); @@ -1451,6 +1453,7 @@ void ttm_bo_unmap_virtual(struct ttm_buffer_object *bo) unmap_mapping_range(bdev->dev_mapping, offset, holelen, 1); } +EXPORT_SYMBOL(ttm_bo_unmap_virtual); static void ttm_bo_vm_insert_rb(struct ttm_buffer_object *bo) { diff --git a/drivers/gpu/drm/ttm/ttm_bo_vm.c b/drivers/gpu/drm/ttm/ttm_bo_vm.c index 40b75032ea4..41c907f6c56 100644 --- a/drivers/gpu/drm/ttm/ttm_bo_vm.c +++ b/drivers/gpu/drm/ttm/ttm_bo_vm.c @@ -101,6 +101,9 @@ static int ttm_bo_vm_fault(struct vm_area_struct *vma, struct vm_fault *vmf) return VM_FAULT_NOPAGE; } + if (bdev->driver->fault_reserve_notify) + bdev->driver->fault_reserve_notify(bo); + /* * Wait for buffer data in transit, due to a pipelined * move. diff --git a/include/drm/radeon_drm.h b/include/drm/radeon_drm.h index 41862e9a4c2..af4b4826997 100644 --- a/include/drm/radeon_drm.h +++ b/include/drm/radeon_drm.h @@ -506,6 +506,8 @@ typedef struct { #define DRM_RADEON_GEM_WAIT_IDLE 0x24 #define DRM_RADEON_CS 0x26 #define DRM_RADEON_INFO 0x27 +#define DRM_RADEON_GEM_SET_TILING 0x28 +#define DRM_RADEON_GEM_GET_TILING 0x29 #define DRM_IOCTL_RADEON_CP_INIT DRM_IOW( DRM_COMMAND_BASE + DRM_RADEON_CP_INIT, drm_radeon_init_t) #define DRM_IOCTL_RADEON_CP_START DRM_IO( DRM_COMMAND_BASE + DRM_RADEON_CP_START) @@ -544,7 +546,8 @@ typedef struct { #define DRM_IOCTL_RADEON_GEM_WAIT_IDLE DRM_IOW(DRM_COMMAND_BASE + DRM_RADEON_GEM_WAIT_IDLE, struct drm_radeon_gem_wait_idle) #define DRM_IOCTL_RADEON_CS DRM_IOWR(DRM_COMMAND_BASE + DRM_RADEON_CS, struct drm_radeon_cs) #define DRM_IOCTL_RADEON_INFO DRM_IOWR(DRM_COMMAND_BASE + DRM_RADEON_INFO, struct drm_radeon_info) - +#define DRM_IOCTL_RADEON_SET_TILING DRM_IOWR(DRM_COMMAND_BASE + DRM_RADEON_GEM_SET_TILING, struct drm_radeon_gem_set_tiling) +#define DRM_IOCTL_RADEON_GET_TILING DRM_IOWR(DRM_COMMAND_BASE + DRM_RADEON_GEM_GET_TILING, struct drm_radeon_gem_get_tiling) typedef struct drm_radeon_init { enum { @@ -796,6 +799,24 @@ struct drm_radeon_gem_create { uint32_t flags; }; +#define RADEON_TILING_MACRO 0x1 +#define RADEON_TILING_MICRO 0x2 +#define RADEON_TILING_SWAP 0x4 +#define RADEON_TILING_SURFACE 0x8 /* this object requires a surface + * when mapped - i.e. front buffer */ + +struct drm_radeon_gem_set_tiling { + uint32_t handle; + uint32_t tiling_flags; + uint32_t pitch; +}; + +struct drm_radeon_gem_get_tiling { + uint32_t handle; + uint32_t tiling_flags; + uint32_t pitch; +}; + struct drm_radeon_gem_mmap { uint32_t handle; uint32_t pad; diff --git a/include/drm/ttm/ttm_bo_driver.h b/include/drm/ttm/ttm_bo_driver.h index ea83dd23a4d..a68829db381 100644 --- a/include/drm/ttm/ttm_bo_driver.h +++ b/include/drm/ttm/ttm_bo_driver.h @@ -354,6 +354,14 @@ struct ttm_bo_driver { int (*sync_obj_flush) (void *sync_obj, void *sync_arg); void (*sync_obj_unref) (void **sync_obj); void *(*sync_obj_ref) (void *sync_obj); + + /* hook to notify driver about a driver move so it + * can do tiling things */ + void (*move_notify)(struct ttm_buffer_object *bo, + struct ttm_mem_reg *new_mem); + /* notify the driver we are taking a fault on this BO + * and have reserved it */ + void (*fault_reserve_notify)(struct ttm_buffer_object *bo); }; #define TTM_NUM_MEM_TYPES 8 @@ -653,6 +661,13 @@ extern int ttm_bo_device_init(struct ttm_bo_device *bdev, struct ttm_bo_driver *driver, uint64_t file_page_offset, bool need_dma32); +/** + * ttm_bo_unmap_virtual + * + * @bo: tear down the virtual mappings for this BO + */ +extern void ttm_bo_unmap_virtual(struct ttm_buffer_object *bo); + /** * ttm_bo_reserve: * -- cgit v1.2.3 From c93bb85b5cba3e3a06f2cad8e9bc5c23d3d10aac Mon Sep 17 00:00:00 2001 From: Jerome Glisse Date: Mon, 13 Jul 2009 21:04:08 +0200 Subject: drm/radeon/kms: fix bandwidth computation on avivo hardware Fix bandwidth computation and crtc priority in memory controller so that crtc memory request are fullfill in time to avoid display artifact. Signed-off-by: Jerome Glisse Signed-off-by: Dave Airlie --- drivers/gpu/drm/radeon/atombios_crtc.c | 276 ++++----- drivers/gpu/drm/radeon/r100.c | 483 +++++++++++++++ drivers/gpu/drm/radeon/r300.c | 1 + drivers/gpu/drm/radeon/r520.c | 14 + drivers/gpu/drm/radeon/radeon.h | 40 +- drivers/gpu/drm/radeon/radeon_asic.h | 13 + drivers/gpu/drm/radeon/radeon_device.c | 10 +- drivers/gpu/drm/radeon/radeon_display.c | 68 ++- drivers/gpu/drm/radeon/radeon_encoders.c | 369 +---------- drivers/gpu/drm/radeon/radeon_legacy_crtc.c | 661 ++++++-------------- drivers/gpu/drm/radeon/radeon_legacy_encoders.c | 188 +----- drivers/gpu/drm/radeon/radeon_mode.h | 48 +- drivers/gpu/drm/radeon/radeon_share.h | 39 ++ drivers/gpu/drm/radeon/rs400.c | 1 + drivers/gpu/drm/radeon/rs600.c | 5 + drivers/gpu/drm/radeon/rs690.c | 472 +++++++++++++++ drivers/gpu/drm/radeon/rs690r.h | 99 +++ drivers/gpu/drm/radeon/rv515.c | 774 ++++++++++++++++++++---- drivers/gpu/drm/radeon/rv515r.h | 170 ++++++ 19 files changed, 2377 insertions(+), 1354 deletions(-) create mode 100644 drivers/gpu/drm/radeon/radeon_share.h create mode 100644 drivers/gpu/drm/radeon/rs690r.h create mode 100644 drivers/gpu/drm/radeon/rv515r.h diff --git a/drivers/gpu/drm/radeon/atombios_crtc.c b/drivers/gpu/drm/radeon/atombios_crtc.c index eac26cdb5da..74d034f77c6 100644 --- a/drivers/gpu/drm/radeon/atombios_crtc.c +++ b/drivers/gpu/drm/radeon/atombios_crtc.c @@ -31,6 +31,132 @@ #include "atom.h" #include "atom-bits.h" +static void atombios_overscan_setup(struct drm_crtc *crtc, + struct drm_display_mode *mode, + struct drm_display_mode *adjusted_mode) +{ + struct drm_device *dev = crtc->dev; + struct radeon_device *rdev = dev->dev_private; + struct radeon_crtc *radeon_crtc = to_radeon_crtc(crtc); + SET_CRTC_OVERSCAN_PS_ALLOCATION args; + int index = GetIndexIntoMasterTable(COMMAND, SetCRTC_OverScan); + int a1, a2; + + memset(&args, 0, sizeof(args)); + + args.usOverscanRight = 0; + args.usOverscanLeft = 0; + args.usOverscanBottom = 0; + args.usOverscanTop = 0; + args.ucCRTC = radeon_crtc->crtc_id; + + switch (radeon_crtc->rmx_type) { + case RMX_CENTER: + args.usOverscanTop = (adjusted_mode->crtc_vdisplay - mode->crtc_vdisplay) / 2; + args.usOverscanBottom = (adjusted_mode->crtc_vdisplay - mode->crtc_vdisplay) / 2; + args.usOverscanLeft = (adjusted_mode->crtc_hdisplay - mode->crtc_hdisplay) / 2; + args.usOverscanRight = (adjusted_mode->crtc_hdisplay - mode->crtc_hdisplay) / 2; + atom_execute_table(rdev->mode_info.atom_context, index, (uint32_t *)&args); + break; + case RMX_ASPECT: + a1 = mode->crtc_vdisplay * adjusted_mode->crtc_hdisplay; + a2 = adjusted_mode->crtc_vdisplay * mode->crtc_hdisplay; + + if (a1 > a2) { + args.usOverscanLeft = (adjusted_mode->crtc_hdisplay - (a2 / mode->crtc_vdisplay)) / 2; + args.usOverscanRight = (adjusted_mode->crtc_hdisplay - (a2 / mode->crtc_vdisplay)) / 2; + } else if (a2 > a1) { + args.usOverscanLeft = (adjusted_mode->crtc_vdisplay - (a1 / mode->crtc_hdisplay)) / 2; + args.usOverscanRight = (adjusted_mode->crtc_vdisplay - (a1 / mode->crtc_hdisplay)) / 2; + } + atom_execute_table(rdev->mode_info.atom_context, index, (uint32_t *)&args); + break; + case RMX_FULL: + default: + args.usOverscanRight = 0; + args.usOverscanLeft = 0; + args.usOverscanBottom = 0; + args.usOverscanTop = 0; + atom_execute_table(rdev->mode_info.atom_context, index, (uint32_t *)&args); + break; + } +} + +static void atombios_scaler_setup(struct drm_crtc *crtc) +{ + struct drm_device *dev = crtc->dev; + struct radeon_device *rdev = dev->dev_private; + struct radeon_crtc *radeon_crtc = to_radeon_crtc(crtc); + ENABLE_SCALER_PS_ALLOCATION args; + int index = GetIndexIntoMasterTable(COMMAND, EnableScaler); + /* fixme - fill in enc_priv for atom dac */ + enum radeon_tv_std tv_std = TV_STD_NTSC; + + if (!ASIC_IS_AVIVO(rdev) && radeon_crtc->crtc_id) + return; + + memset(&args, 0, sizeof(args)); + + args.ucScaler = radeon_crtc->crtc_id; + + if (radeon_crtc->devices & (ATOM_DEVICE_TV_SUPPORT)) { + switch (tv_std) { + case TV_STD_NTSC: + default: + args.ucTVStandard = ATOM_TV_NTSC; + break; + case TV_STD_PAL: + args.ucTVStandard = ATOM_TV_PAL; + break; + case TV_STD_PAL_M: + args.ucTVStandard = ATOM_TV_PALM; + break; + case TV_STD_PAL_60: + args.ucTVStandard = ATOM_TV_PAL60; + break; + case TV_STD_NTSC_J: + args.ucTVStandard = ATOM_TV_NTSCJ; + break; + case TV_STD_SCART_PAL: + args.ucTVStandard = ATOM_TV_PAL; /* ??? */ + break; + case TV_STD_SECAM: + args.ucTVStandard = ATOM_TV_SECAM; + break; + case TV_STD_PAL_CN: + args.ucTVStandard = ATOM_TV_PALCN; + break; + } + args.ucEnable = SCALER_ENABLE_MULTITAP_MODE; + } else if (radeon_crtc->devices & (ATOM_DEVICE_CV_SUPPORT)) { + args.ucTVStandard = ATOM_TV_CV; + args.ucEnable = SCALER_ENABLE_MULTITAP_MODE; + } else { + switch (radeon_crtc->rmx_type) { + case RMX_FULL: + args.ucEnable = ATOM_SCALER_EXPANSION; + break; + case RMX_CENTER: + args.ucEnable = ATOM_SCALER_CENTER; + break; + case RMX_ASPECT: + args.ucEnable = ATOM_SCALER_EXPANSION; + break; + default: + if (ASIC_IS_AVIVO(rdev)) + args.ucEnable = ATOM_SCALER_DISABLE; + else + args.ucEnable = ATOM_SCALER_CENTER; + break; + } + } + atom_execute_table(rdev->mode_info.atom_context, index, (uint32_t *)&args); + if (radeon_crtc->devices & (ATOM_DEVICE_CV_SUPPORT | ATOM_DEVICE_TV_SUPPORT) + && rdev->family >= CHIP_RV515 && rdev->family <= CHIP_RV570) { + atom_rv515_force_tv_scaler(rdev); + } +} + static void atombios_lock_crtc(struct drm_crtc *crtc, int lock) { struct radeon_crtc *radeon_crtc = to_radeon_crtc(crtc); @@ -522,6 +648,9 @@ int atombios_crtc_mode_set(struct drm_crtc *crtc, radeon_crtc_set_base(crtc, x, y, old_fb); radeon_legacy_atom_set_surface(crtc); } + atombios_overscan_setup(crtc, mode, adjusted_mode); + atombios_scaler_setup(crtc); + radeon_bandwidth_update(rdev); return 0; } @@ -529,6 +658,8 @@ static bool atombios_crtc_mode_fixup(struct drm_crtc *crtc, struct drm_display_mode *mode, struct drm_display_mode *adjusted_mode) { + if (!radeon_crtc_scaling_mode_fixup(crtc, mode, adjusted_mode)) + return false; return true; } @@ -561,148 +692,3 @@ void radeon_atombios_init_crtc(struct drm_device *dev, AVIVO_D2CRTC_H_TOTAL - AVIVO_D1CRTC_H_TOTAL; drm_crtc_helper_add(&radeon_crtc->base, &atombios_helper_funcs); } - -void radeon_init_disp_bw_avivo(struct drm_device *dev, - struct drm_display_mode *mode1, - uint32_t pixel_bytes1, - struct drm_display_mode *mode2, - uint32_t pixel_bytes2) -{ - struct radeon_device *rdev = dev->dev_private; - fixed20_12 min_mem_eff; - fixed20_12 peak_disp_bw, mem_bw, pix_clk, pix_clk2, temp_ff; - fixed20_12 sclk_ff, mclk_ff; - uint32_t dc_lb_memory_split, temp; - - min_mem_eff.full = rfixed_const_8(0); - if (rdev->disp_priority == 2) { - uint32_t mc_init_misc_lat_timer = 0; - if (rdev->family == CHIP_RV515) - mc_init_misc_lat_timer = - RREG32_MC(RV515_MC_INIT_MISC_LAT_TIMER); - else if (rdev->family == CHIP_RS690) - mc_init_misc_lat_timer = - RREG32_MC(RS690_MC_INIT_MISC_LAT_TIMER); - - mc_init_misc_lat_timer &= - ~(R300_MC_DISP1R_INIT_LAT_MASK << - R300_MC_DISP1R_INIT_LAT_SHIFT); - mc_init_misc_lat_timer &= - ~(R300_MC_DISP0R_INIT_LAT_MASK << - R300_MC_DISP0R_INIT_LAT_SHIFT); - - if (mode2) - mc_init_misc_lat_timer |= - (1 << R300_MC_DISP1R_INIT_LAT_SHIFT); - if (mode1) - mc_init_misc_lat_timer |= - (1 << R300_MC_DISP0R_INIT_LAT_SHIFT); - - if (rdev->family == CHIP_RV515) - WREG32_MC(RV515_MC_INIT_MISC_LAT_TIMER, - mc_init_misc_lat_timer); - else if (rdev->family == CHIP_RS690) - WREG32_MC(RS690_MC_INIT_MISC_LAT_TIMER, - mc_init_misc_lat_timer); - } - - /* - * determine is there is enough bw for current mode - */ - temp_ff.full = rfixed_const(100); - mclk_ff.full = rfixed_const(rdev->clock.default_mclk); - mclk_ff.full = rfixed_div(mclk_ff, temp_ff); - sclk_ff.full = rfixed_const(rdev->clock.default_sclk); - sclk_ff.full = rfixed_div(sclk_ff, temp_ff); - - temp = (rdev->mc.vram_width / 8) * (rdev->mc.vram_is_ddr ? 2 : 1); - temp_ff.full = rfixed_const(temp); - mem_bw.full = rfixed_mul(mclk_ff, temp_ff); - mem_bw.full = rfixed_mul(mem_bw, min_mem_eff); - - pix_clk.full = 0; - pix_clk2.full = 0; - peak_disp_bw.full = 0; - if (mode1) { - temp_ff.full = rfixed_const(1000); - pix_clk.full = rfixed_const(mode1->clock); /* convert to fixed point */ - pix_clk.full = rfixed_div(pix_clk, temp_ff); - temp_ff.full = rfixed_const(pixel_bytes1); - peak_disp_bw.full += rfixed_mul(pix_clk, temp_ff); - } - if (mode2) { - temp_ff.full = rfixed_const(1000); - pix_clk2.full = rfixed_const(mode2->clock); /* convert to fixed point */ - pix_clk2.full = rfixed_div(pix_clk2, temp_ff); - temp_ff.full = rfixed_const(pixel_bytes2); - peak_disp_bw.full += rfixed_mul(pix_clk2, temp_ff); - } - - if (peak_disp_bw.full >= mem_bw.full) { - DRM_ERROR - ("You may not have enough display bandwidth for current mode\n" - "If you have flickering problem, try to lower resolution, refresh rate, or color depth\n"); - printk("peak disp bw %d, mem_bw %d\n", - rfixed_trunc(peak_disp_bw), rfixed_trunc(mem_bw)); - } - - /* - * Line Buffer Setup - * There is a single line buffer shared by both display controllers. - * DC_LB_MEMORY_SPLIT controls how that line buffer is shared between the display - * controllers. The paritioning can either be done manually or via one of four - * preset allocations specified in bits 1:0: - * 0 - line buffer is divided in half and shared between each display controller - * 1 - D1 gets 3/4 of the line buffer, D2 gets 1/4 - * 2 - D1 gets the whole buffer - * 3 - D1 gets 1/4 of the line buffer, D2 gets 3/4 - * Setting bit 2 of DC_LB_MEMORY_SPLIT controls switches to manual allocation mode. - * In manual allocation mode, D1 always starts at 0, D1 end/2 is specified in bits - * 14:4; D2 allocation follows D1. - */ - - /* is auto or manual better ? */ - dc_lb_memory_split = - RREG32(AVIVO_DC_LB_MEMORY_SPLIT) & ~AVIVO_DC_LB_MEMORY_SPLIT_MASK; - dc_lb_memory_split &= ~AVIVO_DC_LB_MEMORY_SPLIT_SHIFT_MODE; -#if 1 - /* auto */ - if (mode1 && mode2) { - if (mode1->hdisplay > mode2->hdisplay) { - if (mode1->hdisplay > 2560) - dc_lb_memory_split |= - AVIVO_DC_LB_MEMORY_SPLIT_D1_3Q_D2_1Q; - else - dc_lb_memory_split |= - AVIVO_DC_LB_MEMORY_SPLIT_D1HALF_D2HALF; - } else if (mode2->hdisplay > mode1->hdisplay) { - if (mode2->hdisplay > 2560) - dc_lb_memory_split |= - AVIVO_DC_LB_MEMORY_SPLIT_D1_1Q_D2_3Q; - else - dc_lb_memory_split |= - AVIVO_DC_LB_MEMORY_SPLIT_D1HALF_D2HALF; - } else - dc_lb_memory_split |= - AVIVO_DC_LB_MEMORY_SPLIT_D1HALF_D2HALF; - } else if (mode1) { - dc_lb_memory_split |= AVIVO_DC_LB_MEMORY_SPLIT_D1_ONLY; - } else if (mode2) { - dc_lb_memory_split |= AVIVO_DC_LB_MEMORY_SPLIT_D1_1Q_D2_3Q; - } -#else - /* manual */ - dc_lb_memory_split |= AVIVO_DC_LB_MEMORY_SPLIT_SHIFT_MODE; - dc_lb_memory_split &= - ~(AVIVO_DC_LB_DISP1_END_ADR_MASK << - AVIVO_DC_LB_DISP1_END_ADR_SHIFT); - if (mode1) { - dc_lb_memory_split |= - ((((mode1->hdisplay / 2) + 64) & AVIVO_DC_LB_DISP1_END_ADR_MASK) - << AVIVO_DC_LB_DISP1_END_ADR_SHIFT); - } else if (mode2) { - dc_lb_memory_split |= (0 << AVIVO_DC_LB_DISP1_END_ADR_SHIFT); - } -#endif - WREG32(AVIVO_DC_LB_MEMORY_SPLIT, dc_lb_memory_split); -} diff --git a/drivers/gpu/drm/radeon/r100.c b/drivers/gpu/drm/radeon/r100.c index 69bd7cb5997..0e00fef0b84 100644 --- a/drivers/gpu/drm/radeon/r100.c +++ b/drivers/gpu/drm/radeon/r100.c @@ -1784,3 +1784,486 @@ void r100_clear_surface_reg(struct radeon_device *rdev, int reg) int surf_index = reg * 16; WREG32(RADEON_SURFACE0_INFO + surf_index, 0); } + +void r100_bandwidth_update(struct radeon_device *rdev) +{ + fixed20_12 trcd_ff, trp_ff, tras_ff, trbs_ff, tcas_ff; + fixed20_12 sclk_ff, mclk_ff, sclk_eff_ff, sclk_delay_ff; + fixed20_12 peak_disp_bw, mem_bw, pix_clk, pix_clk2, temp_ff, crit_point_ff; + uint32_t temp, data, mem_trcd, mem_trp, mem_tras; + fixed20_12 memtcas_ff[8] = { + fixed_init(1), + fixed_init(2), + fixed_init(3), + fixed_init(0), + fixed_init_half(1), + fixed_init_half(2), + fixed_init(0), + }; + fixed20_12 memtcas_rs480_ff[8] = { + fixed_init(0), + fixed_init(1), + fixed_init(2), + fixed_init(3), + fixed_init(0), + fixed_init_half(1), + fixed_init_half(2), + fixed_init_half(3), + }; + fixed20_12 memtcas2_ff[8] = { + fixed_init(0), + fixed_init(1), + fixed_init(2), + fixed_init(3), + fixed_init(4), + fixed_init(5), + fixed_init(6), + fixed_init(7), + }; + fixed20_12 memtrbs[8] = { + fixed_init(1), + fixed_init_half(1), + fixed_init(2), + fixed_init_half(2), + fixed_init(3), + fixed_init_half(3), + fixed_init(4), + fixed_init_half(4) + }; + fixed20_12 memtrbs_r4xx[8] = { + fixed_init(4), + fixed_init(5), + fixed_init(6), + fixed_init(7), + fixed_init(8), + fixed_init(9), + fixed_init(10), + fixed_init(11) + }; + fixed20_12 min_mem_eff; + fixed20_12 mc_latency_sclk, mc_latency_mclk, k1; + fixed20_12 cur_latency_mclk, cur_latency_sclk; + fixed20_12 disp_latency, disp_latency_overhead, disp_drain_rate, + disp_drain_rate2, read_return_rate; + fixed20_12 time_disp1_drop_priority; + int c; + int cur_size = 16; /* in octawords */ + int critical_point = 0, critical_point2; +/* uint32_t read_return_rate, time_disp1_drop_priority; */ + int stop_req, max_stop_req; + struct drm_display_mode *mode1 = NULL; + struct drm_display_mode *mode2 = NULL; + uint32_t pixel_bytes1 = 0; + uint32_t pixel_bytes2 = 0; + + if (rdev->mode_info.crtcs[0]->base.enabled) { + mode1 = &rdev->mode_info.crtcs[0]->base.mode; + pixel_bytes1 = rdev->mode_info.crtcs[0]->base.fb->bits_per_pixel / 8; + } + if (rdev->mode_info.crtcs[1]->base.enabled) { + mode2 = &rdev->mode_info.crtcs[1]->base.mode; + pixel_bytes2 = rdev->mode_info.crtcs[1]->base.fb->bits_per_pixel / 8; + } + + min_mem_eff.full = rfixed_const_8(0); + /* get modes */ + if ((rdev->disp_priority == 2) && ASIC_IS_R300(rdev)) { + uint32_t mc_init_misc_lat_timer = RREG32(R300_MC_INIT_MISC_LAT_TIMER); + mc_init_misc_lat_timer &= ~(R300_MC_DISP1R_INIT_LAT_MASK << R300_MC_DISP1R_INIT_LAT_SHIFT); + mc_init_misc_lat_timer &= ~(R300_MC_DISP0R_INIT_LAT_MASK << R300_MC_DISP0R_INIT_LAT_SHIFT); + /* check crtc enables */ + if (mode2) + mc_init_misc_lat_timer |= (1 << R300_MC_DISP1R_INIT_LAT_SHIFT); + if (mode1) + mc_init_misc_lat_timer |= (1 << R300_MC_DISP0R_INIT_LAT_SHIFT); + WREG32(R300_MC_INIT_MISC_LAT_TIMER, mc_init_misc_lat_timer); + } + + /* + * determine is there is enough bw for current mode + */ + mclk_ff.full = rfixed_const(rdev->clock.default_mclk); + temp_ff.full = rfixed_const(100); + mclk_ff.full = rfixed_div(mclk_ff, temp_ff); + sclk_ff.full = rfixed_const(rdev->clock.default_sclk); + sclk_ff.full = rfixed_div(sclk_ff, temp_ff); + + temp = (rdev->mc.vram_width / 8) * (rdev->mc.vram_is_ddr ? 2 : 1); + temp_ff.full = rfixed_const(temp); + mem_bw.full = rfixed_mul(mclk_ff, temp_ff); + + pix_clk.full = 0; + pix_clk2.full = 0; + peak_disp_bw.full = 0; + if (mode1) { + temp_ff.full = rfixed_const(1000); + pix_clk.full = rfixed_const(mode1->clock); /* convert to fixed point */ + pix_clk.full = rfixed_div(pix_clk, temp_ff); + temp_ff.full = rfixed_const(pixel_bytes1); + peak_disp_bw.full += rfixed_mul(pix_clk, temp_ff); + } + if (mode2) { + temp_ff.full = rfixed_const(1000); + pix_clk2.full = rfixed_const(mode2->clock); /* convert to fixed point */ + pix_clk2.full = rfixed_div(pix_clk2, temp_ff); + temp_ff.full = rfixed_const(pixel_bytes2); + peak_disp_bw.full += rfixed_mul(pix_clk2, temp_ff); + } + + mem_bw.full = rfixed_mul(mem_bw, min_mem_eff); + if (peak_disp_bw.full >= mem_bw.full) { + DRM_ERROR("You may not have enough display bandwidth for current mode\n" + "If you have flickering problem, try to lower resolution, refresh rate, or color depth\n"); + } + + /* Get values from the EXT_MEM_CNTL register...converting its contents. */ + temp = RREG32(RADEON_MEM_TIMING_CNTL); + if ((rdev->family == CHIP_RV100) || (rdev->flags & RADEON_IS_IGP)) { /* RV100, M6, IGPs */ + mem_trcd = ((temp >> 2) & 0x3) + 1; + mem_trp = ((temp & 0x3)) + 1; + mem_tras = ((temp & 0x70) >> 4) + 1; + } else if (rdev->family == CHIP_R300 || + rdev->family == CHIP_R350) { /* r300, r350 */ + mem_trcd = (temp & 0x7) + 1; + mem_trp = ((temp >> 8) & 0x7) + 1; + mem_tras = ((temp >> 11) & 0xf) + 4; + } else if (rdev->family == CHIP_RV350 || + rdev->family <= CHIP_RV380) { + /* rv3x0 */ + mem_trcd = (temp & 0x7) + 3; + mem_trp = ((temp >> 8) & 0x7) + 3; + mem_tras = ((temp >> 11) & 0xf) + 6; + } else if (rdev->family == CHIP_R420 || + rdev->family == CHIP_R423 || + rdev->family == CHIP_RV410) { + /* r4xx */ + mem_trcd = (temp & 0xf) + 3; + if (mem_trcd > 15) + mem_trcd = 15; + mem_trp = ((temp >> 8) & 0xf) + 3; + if (mem_trp > 15) + mem_trp = 15; + mem_tras = ((temp >> 12) & 0x1f) + 6; + if (mem_tras > 31) + mem_tras = 31; + } else { /* RV200, R200 */ + mem_trcd = (temp & 0x7) + 1; + mem_trp = ((temp >> 8) & 0x7) + 1; + mem_tras = ((temp >> 12) & 0xf) + 4; + } + /* convert to FF */ + trcd_ff.full = rfixed_const(mem_trcd); + trp_ff.full = rfixed_const(mem_trp); + tras_ff.full = rfixed_const(mem_tras); + + /* Get values from the MEM_SDRAM_MODE_REG register...converting its */ + temp = RREG32(RADEON_MEM_SDRAM_MODE_REG); + data = (temp & (7 << 20)) >> 20; + if ((rdev->family == CHIP_RV100) || rdev->flags & RADEON_IS_IGP) { + if (rdev->family == CHIP_RS480) /* don't think rs400 */ + tcas_ff = memtcas_rs480_ff[data]; + else + tcas_ff = memtcas_ff[data]; + } else + tcas_ff = memtcas2_ff[data]; + + if (rdev->family == CHIP_RS400 || + rdev->family == CHIP_RS480) { + /* extra cas latency stored in bits 23-25 0-4 clocks */ + data = (temp >> 23) & 0x7; + if (data < 5) + tcas_ff.full += rfixed_const(data); + } + + if (ASIC_IS_R300(rdev) && !(rdev->flags & RADEON_IS_IGP)) { + /* on the R300, Tcas is included in Trbs. + */ + temp = RREG32(RADEON_MEM_CNTL); + data = (R300_MEM_NUM_CHANNELS_MASK & temp); + if (data == 1) { + if (R300_MEM_USE_CD_CH_ONLY & temp) { + temp = RREG32(R300_MC_IND_INDEX); + temp &= ~R300_MC_IND_ADDR_MASK; + temp |= R300_MC_READ_CNTL_CD_mcind; + WREG32(R300_MC_IND_INDEX, temp); + temp = RREG32(R300_MC_IND_DATA); + data = (R300_MEM_RBS_POSITION_C_MASK & temp); + } else { + temp = RREG32(R300_MC_READ_CNTL_AB); + data = (R300_MEM_RBS_POSITION_A_MASK & temp); + } + } else { + temp = RREG32(R300_MC_READ_CNTL_AB); + data = (R300_MEM_RBS_POSITION_A_MASK & temp); + } + if (rdev->family == CHIP_RV410 || + rdev->family == CHIP_R420 || + rdev->family == CHIP_R423) + trbs_ff = memtrbs_r4xx[data]; + else + trbs_ff = memtrbs[data]; + tcas_ff.full += trbs_ff.full; + } + + sclk_eff_ff.full = sclk_ff.full; + + if (rdev->flags & RADEON_IS_AGP) { + fixed20_12 agpmode_ff; + agpmode_ff.full = rfixed_const(radeon_agpmode); + temp_ff.full = rfixed_const_666(16); + sclk_eff_ff.full -= rfixed_mul(agpmode_ff, temp_ff); + } + /* TODO PCIE lanes may affect this - agpmode == 16?? */ + + if (ASIC_IS_R300(rdev)) { + sclk_delay_ff.full = rfixed_const(250); + } else { + if ((rdev->family == CHIP_RV100) || + rdev->flags & RADEON_IS_IGP) { + if (rdev->mc.vram_is_ddr) + sclk_delay_ff.full = rfixed_const(41); + else + sclk_delay_ff.full = rfixed_const(33); + } else { + if (rdev->mc.vram_width == 128) + sclk_delay_ff.full = rfixed_const(57); + else + sclk_delay_ff.full = rfixed_const(41); + } + } + + mc_latency_sclk.full = rfixed_div(sclk_delay_ff, sclk_eff_ff); + + if (rdev->mc.vram_is_ddr) { + if (rdev->mc.vram_width == 32) { + k1.full = rfixed_const(40); + c = 3; + } else { + k1.full = rfixed_const(20); + c = 1; + } + } else { + k1.full = rfixed_const(40); + c = 3; + } + + temp_ff.full = rfixed_const(2); + mc_latency_mclk.full = rfixed_mul(trcd_ff, temp_ff); + temp_ff.full = rfixed_const(c); + mc_latency_mclk.full += rfixed_mul(tcas_ff, temp_ff); + temp_ff.full = rfixed_const(4); + mc_latency_mclk.full += rfixed_mul(tras_ff, temp_ff); + mc_latency_mclk.full += rfixed_mul(trp_ff, temp_ff); + mc_latency_mclk.full += k1.full; + + mc_latency_mclk.full = rfixed_div(mc_latency_mclk, mclk_ff); + mc_latency_mclk.full += rfixed_div(temp_ff, sclk_eff_ff); + + /* + HW cursor time assuming worst case of full size colour cursor. + */ + temp_ff.full = rfixed_const((2 * (cur_size - (rdev->mc.vram_is_ddr + 1)))); + temp_ff.full += trcd_ff.full; + if (temp_ff.full < tras_ff.full) + temp_ff.full = tras_ff.full; + cur_latency_mclk.full = rfixed_div(temp_ff, mclk_ff); + + temp_ff.full = rfixed_const(cur_size); + cur_latency_sclk.full = rfixed_div(temp_ff, sclk_eff_ff); + /* + Find the total latency for the display data. + */ + disp_latency_overhead.full = rfixed_const(80); + disp_latency_overhead.full = rfixed_div(disp_latency_overhead, sclk_ff); + mc_latency_mclk.full += disp_latency_overhead.full + cur_latency_mclk.full; + mc_latency_sclk.full += disp_latency_overhead.full + cur_latency_sclk.full; + + if (mc_latency_mclk.full > mc_latency_sclk.full) + disp_latency.full = mc_latency_mclk.full; + else + disp_latency.full = mc_latency_sclk.full; + + /* setup Max GRPH_STOP_REQ default value */ + if (ASIC_IS_RV100(rdev)) + max_stop_req = 0x5c; + else + max_stop_req = 0x7c; + + if (mode1) { + /* CRTC1 + Set GRPH_BUFFER_CNTL register using h/w defined optimal values. + GRPH_STOP_REQ <= MIN[ 0x7C, (CRTC_H_DISP + 1) * (bit depth) / 0x10 ] + */ + stop_req = mode1->hdisplay * pixel_bytes1 / 16; + + if (stop_req > max_stop_req) + stop_req = max_stop_req; + + /* + Find the drain rate of the display buffer. + */ + temp_ff.full = rfixed_const((16/pixel_bytes1)); + disp_drain_rate.full = rfixed_div(pix_clk, temp_ff); + + /* + Find the critical point of the display buffer. + */ + crit_point_ff.full = rfixed_mul(disp_drain_rate, disp_latency); + crit_point_ff.full += rfixed_const_half(0); + + critical_point = rfixed_trunc(crit_point_ff); + + if (rdev->disp_priority == 2) { + critical_point = 0; + } + + /* + The critical point should never be above max_stop_req-4. Setting + GRPH_CRITICAL_CNTL = 0 will thus force high priority all the time. + */ + if (max_stop_req - critical_point < 4) + critical_point = 0; + + if (critical_point == 0 && mode2 && rdev->family == CHIP_R300) { + /* some R300 cards have problem with this set to 0, when CRTC2 is enabled.*/ + critical_point = 0x10; + } + + temp = RREG32(RADEON_GRPH_BUFFER_CNTL); + temp &= ~(RADEON_GRPH_STOP_REQ_MASK); + temp |= (stop_req << RADEON_GRPH_STOP_REQ_SHIFT); + temp &= ~(RADEON_GRPH_START_REQ_MASK); + if ((rdev->family == CHIP_R350) && + (stop_req > 0x15)) { + stop_req -= 0x10; + } + temp |= (stop_req << RADEON_GRPH_START_REQ_SHIFT); + temp |= RADEON_GRPH_BUFFER_SIZE; + temp &= ~(RADEON_GRPH_CRITICAL_CNTL | + RADEON_GRPH_CRITICAL_AT_SOF | + RADEON_GRPH_STOP_CNTL); + /* + Write the result into the register. + */ + WREG32(RADEON_GRPH_BUFFER_CNTL, ((temp & ~RADEON_GRPH_CRITICAL_POINT_MASK) | + (critical_point << RADEON_GRPH_CRITICAL_POINT_SHIFT))); + +#if 0 + if ((rdev->family == CHIP_RS400) || + (rdev->family == CHIP_RS480)) { + /* attempt to program RS400 disp regs correctly ??? */ + temp = RREG32(RS400_DISP1_REG_CNTL); + temp &= ~(RS400_DISP1_START_REQ_LEVEL_MASK | + RS400_DISP1_STOP_REQ_LEVEL_MASK); + WREG32(RS400_DISP1_REQ_CNTL1, (temp | + (critical_point << RS400_DISP1_START_REQ_LEVEL_SHIFT) | + (critical_point << RS400_DISP1_STOP_REQ_LEVEL_SHIFT))); + temp = RREG32(RS400_DMIF_MEM_CNTL1); + temp &= ~(RS400_DISP1_CRITICAL_POINT_START_MASK | + RS400_DISP1_CRITICAL_POINT_STOP_MASK); + WREG32(RS400_DMIF_MEM_CNTL1, (temp | + (critical_point << RS400_DISP1_CRITICAL_POINT_START_SHIFT) | + (critical_point << RS400_DISP1_CRITICAL_POINT_STOP_SHIFT))); + } +#endif + + DRM_DEBUG("GRPH_BUFFER_CNTL from to %x\n", + /* (unsigned int)info->SavedReg->grph_buffer_cntl, */ + (unsigned int)RREG32(RADEON_GRPH_BUFFER_CNTL)); + } + + if (mode2) { + u32 grph2_cntl; + stop_req = mode2->hdisplay * pixel_bytes2 / 16; + + if (stop_req > max_stop_req) + stop_req = max_stop_req; + + /* + Find the drain rate of the display buffer. + */ + temp_ff.full = rfixed_const((16/pixel_bytes2)); + disp_drain_rate2.full = rfixed_div(pix_clk2, temp_ff); + + grph2_cntl = RREG32(RADEON_GRPH2_BUFFER_CNTL); + grph2_cntl &= ~(RADEON_GRPH_STOP_REQ_MASK); + grph2_cntl |= (stop_req << RADEON_GRPH_STOP_REQ_SHIFT); + grph2_cntl &= ~(RADEON_GRPH_START_REQ_MASK); + if ((rdev->family == CHIP_R350) && + (stop_req > 0x15)) { + stop_req -= 0x10; + } + grph2_cntl |= (stop_req << RADEON_GRPH_START_REQ_SHIFT); + grph2_cntl |= RADEON_GRPH_BUFFER_SIZE; + grph2_cntl &= ~(RADEON_GRPH_CRITICAL_CNTL | + RADEON_GRPH_CRITICAL_AT_SOF | + RADEON_GRPH_STOP_CNTL); + + if ((rdev->family == CHIP_RS100) || + (rdev->family == CHIP_RS200)) + critical_point2 = 0; + else { + temp = (rdev->mc.vram_width * rdev->mc.vram_is_ddr + 1)/128; + temp_ff.full = rfixed_const(temp); + temp_ff.full = rfixed_mul(mclk_ff, temp_ff); + if (sclk_ff.full < temp_ff.full) + temp_ff.full = sclk_ff.full; + + read_return_rate.full = temp_ff.full; + + if (mode1) { + temp_ff.full = read_return_rate.full - disp_drain_rate.full; + time_disp1_drop_priority.full = rfixed_div(crit_point_ff, temp_ff); + } else { + time_disp1_drop_priority.full = 0; + } + crit_point_ff.full = disp_latency.full + time_disp1_drop_priority.full + disp_latency.full; + crit_point_ff.full = rfixed_mul(crit_point_ff, disp_drain_rate2); + crit_point_ff.full += rfixed_const_half(0); + + critical_point2 = rfixed_trunc(crit_point_ff); + + if (rdev->disp_priority == 2) { + critical_point2 = 0; + } + + if (max_stop_req - critical_point2 < 4) + critical_point2 = 0; + + } + + if (critical_point2 == 0 && rdev->family == CHIP_R300) { + /* some R300 cards have problem with this set to 0 */ + critical_point2 = 0x10; + } + + WREG32(RADEON_GRPH2_BUFFER_CNTL, ((grph2_cntl & ~RADEON_GRPH_CRITICAL_POINT_MASK) | + (critical_point2 << RADEON_GRPH_CRITICAL_POINT_SHIFT))); + + if ((rdev->family == CHIP_RS400) || + (rdev->family == CHIP_RS480)) { +#if 0 + /* attempt to program RS400 disp2 regs correctly ??? */ + temp = RREG32(RS400_DISP2_REQ_CNTL1); + temp &= ~(RS400_DISP2_START_REQ_LEVEL_MASK | + RS400_DISP2_STOP_REQ_LEVEL_MASK); + WREG32(RS400_DISP2_REQ_CNTL1, (temp | + (critical_point2 << RS400_DISP1_START_REQ_LEVEL_SHIFT) | + (critical_point2 << RS400_DISP1_STOP_REQ_LEVEL_SHIFT))); + temp = RREG32(RS400_DISP2_REQ_CNTL2); + temp &= ~(RS400_DISP2_CRITICAL_POINT_START_MASK | + RS400_DISP2_CRITICAL_POINT_STOP_MASK); + WREG32(RS400_DISP2_REQ_CNTL2, (temp | + (critical_point2 << RS400_DISP2_CRITICAL_POINT_START_SHIFT) | + (critical_point2 << RS400_DISP2_CRITICAL_POINT_STOP_SHIFT))); +#endif + WREG32(RS400_DISP2_REQ_CNTL1, 0x105DC1CC); + WREG32(RS400_DISP2_REQ_CNTL2, 0x2749D000); + WREG32(RS400_DMIF_MEM_CNTL1, 0x29CA71DC); + WREG32(RS400_DISP1_REQ_CNTL1, 0x28FBC3AC); + } + + DRM_DEBUG("GRPH2_BUFFER_CNTL from to %x\n", + (unsigned int)RREG32(RADEON_GRPH2_BUFFER_CNTL)); + } +} diff --git a/drivers/gpu/drm/radeon/r300.c b/drivers/gpu/drm/radeon/r300.c index 28e5777658b..9c8d41534a5 100644 --- a/drivers/gpu/drm/radeon/r300.c +++ b/drivers/gpu/drm/radeon/r300.c @@ -31,6 +31,7 @@ #include "radeon_reg.h" #include "radeon.h" #include "radeon_drm.h" +#include "radeon_share.h" /* r300,r350,rv350,rv370,rv380 depends on : */ void r100_hdp_reset(struct radeon_device *rdev); diff --git a/drivers/gpu/drm/radeon/r520.c b/drivers/gpu/drm/radeon/r520.c index b6bd3758db6..0a981e2ee2f 100644 --- a/drivers/gpu/drm/radeon/r520.c +++ b/drivers/gpu/drm/radeon/r520.c @@ -28,6 +28,7 @@ #include "drmP.h" #include "radeon_reg.h" #include "radeon.h" +#include "radeon_share.h" /* r520,rv530,rv560,rv570,r580 depends on : */ void r100_hdp_reset(struct radeon_device *rdev); @@ -226,7 +227,20 @@ static void r520_vram_get_type(struct radeon_device *rdev) void r520_vram_info(struct radeon_device *rdev) { + fixed20_12 a; + r520_vram_get_type(rdev); r100_vram_init_sizes(rdev); + /* FIXME: we should enforce default clock in case GPU is not in + * default setup + */ + a.full = rfixed_const(100); + rdev->pm.sclk.full = rfixed_const(rdev->clock.default_sclk); + rdev->pm.sclk.full = rfixed_div(rdev->pm.sclk, a); +} + +void r520_bandwidth_update(struct radeon_device *rdev) +{ + rv515_bandwidth_avivo_update(rdev); } diff --git a/drivers/gpu/drm/radeon/radeon.h b/drivers/gpu/drm/radeon/radeon.h index af12a2fe322..63a3fe32e58 100644 --- a/drivers/gpu/drm/radeon/radeon.h +++ b/drivers/gpu/drm/radeon/radeon.h @@ -113,6 +113,7 @@ enum radeon_family { CHIP_RV770, CHIP_RV730, CHIP_RV710, + CHIP_RS880, CHIP_LAST, }; @@ -490,6 +491,39 @@ struct radeon_wb { uint64_t gpu_addr; }; +/** + * struct radeon_pm - power management datas + * @max_bandwidth: maximum bandwidth the gpu has (MByte/s) + * @igp_sideport_mclk: sideport memory clock Mhz (rs690,rs740,rs780,rs880) + * @igp_system_mclk: system clock Mhz (rs690,rs740,rs780,rs880) + * @igp_ht_link_clk: ht link clock Mhz (rs690,rs740,rs780,rs880) + * @igp_ht_link_width: ht link width in bits (rs690,rs740,rs780,rs880) + * @k8_bandwidth: k8 bandwidth the gpu has (MByte/s) (IGP) + * @sideport_bandwidth: sideport bandwidth the gpu has (MByte/s) (IGP) + * @ht_bandwidth: ht bandwidth the gpu has (MByte/s) (IGP) + * @core_bandwidth: core GPU bandwidth the gpu has (MByte/s) (IGP) + * @sclk: GPU clock Mhz (core bandwith depends of this clock) + * @needed_bandwidth: current bandwidth needs + * + * It keeps track of various data needed to take powermanagement decision. + * Bandwith need is used to determine minimun clock of the GPU and memory. + * Equation between gpu/memory clock and available bandwidth is hw dependent + * (type of memory, bus size, efficiency, ...) + */ +struct radeon_pm { + fixed20_12 max_bandwidth; + fixed20_12 igp_sideport_mclk; + fixed20_12 igp_system_mclk; + fixed20_12 igp_ht_link_clk; + fixed20_12 igp_ht_link_width; + fixed20_12 k8_bandwidth; + fixed20_12 sideport_bandwidth; + fixed20_12 ht_bandwidth; + fixed20_12 core_bandwidth; + fixed20_12 sclk; + fixed20_12 needed_bandwidth; +}; + /* * Benchmarking @@ -551,19 +585,17 @@ struct radeon_asic { void (*set_memory_clock)(struct radeon_device *rdev, uint32_t mem_clock); void (*set_pcie_lanes)(struct radeon_device *rdev, int lanes); void (*set_clock_gating)(struct radeon_device *rdev, int enable); - int (*set_surface_reg)(struct radeon_device *rdev, int reg, uint32_t tiling_flags, uint32_t pitch, uint32_t offset, uint32_t obj_size); int (*clear_surface_reg)(struct radeon_device *rdev, int reg); + void (*bandwidth_update)(struct radeon_device *rdev); }; union radeon_asic_config { struct r300_asic r300; }; -/* r100 */ -void r100_vram_init_sizes(struct radeon_device *rdev); /* * IOCTL. @@ -646,6 +678,7 @@ struct radeon_device { struct radeon_irq irq; struct radeon_asic *asic; struct radeon_gem gem; + struct radeon_pm pm; struct mutex cs_mutex; struct radeon_wb wb; bool gpu_lockup; @@ -829,5 +862,6 @@ static inline void radeon_ring_write(struct radeon_device *rdev, uint32_t v) #define radeon_set_clock_gating(rdev, e) (rdev)->asic->set_clock_gating((rdev), (e)) #define radeon_set_surface_reg(rdev, r, f, p, o, s) ((rdev)->asic->set_surface_reg((rdev), (r), (f), (p), (o), (s))) #define radeon_clear_surface_reg(rdev, r) ((rdev)->asic->clear_surface_reg((rdev), (r))) +#define radeon_bandwidth_update(rdev) (rdev)->asic->bandwidth_update((rdev)) #endif diff --git a/drivers/gpu/drm/radeon/radeon_asic.h b/drivers/gpu/drm/radeon/radeon_asic.h index dd903d32940..9a75876e0c3 100644 --- a/drivers/gpu/drm/radeon/radeon_asic.h +++ b/drivers/gpu/drm/radeon/radeon_asic.h @@ -75,6 +75,7 @@ int r100_set_surface_reg(struct radeon_device *rdev, int reg, uint32_t tiling_flags, uint32_t pitch, uint32_t offset, uint32_t obj_size); int r100_clear_surface_reg(struct radeon_device *rdev, int reg); +void r100_bandwidth_update(struct radeon_device *rdev); static struct radeon_asic r100_asic = { .init = &r100_init, @@ -106,6 +107,7 @@ static struct radeon_asic r100_asic = { .set_clock_gating = &radeon_legacy_set_clock_gating, .set_surface_reg = r100_set_surface_reg, .clear_surface_reg = r100_clear_surface_reg, + .bandwidth_update = &r100_bandwidth_update, }; @@ -165,6 +167,7 @@ static struct radeon_asic r300_asic = { .set_clock_gating = &radeon_legacy_set_clock_gating, .set_surface_reg = r100_set_surface_reg, .clear_surface_reg = r100_clear_surface_reg, + .bandwidth_update = &r100_bandwidth_update, }; /* @@ -204,6 +207,7 @@ static struct radeon_asic r420_asic = { .set_clock_gating = &radeon_atom_set_clock_gating, .set_surface_reg = r100_set_surface_reg, .clear_surface_reg = r100_clear_surface_reg, + .bandwidth_update = &r100_bandwidth_update, }; @@ -250,6 +254,7 @@ static struct radeon_asic rs400_asic = { .set_clock_gating = &radeon_legacy_set_clock_gating, .set_surface_reg = r100_set_surface_reg, .clear_surface_reg = r100_clear_surface_reg, + .bandwidth_update = &r100_bandwidth_update, }; @@ -267,6 +272,7 @@ void rs600_gart_tlb_flush(struct radeon_device *rdev); int rs600_gart_set_page(struct radeon_device *rdev, int i, uint64_t addr); uint32_t rs600_mc_rreg(struct radeon_device *rdev, uint32_t reg); void rs600_mc_wreg(struct radeon_device *rdev, uint32_t reg, uint32_t v); +void rs600_bandwidth_update(struct radeon_device *rdev); static struct radeon_asic rs600_asic = { .init = &r300_init, .errata = &rs600_errata, @@ -295,6 +301,7 @@ static struct radeon_asic rs600_asic = { .set_memory_clock = &radeon_atom_set_memory_clock, .set_pcie_lanes = NULL, .set_clock_gating = &radeon_atom_set_clock_gating, + .bandwidth_update = &rs600_bandwidth_update, }; @@ -307,6 +314,7 @@ int rs690_mc_init(struct radeon_device *rdev); void rs690_mc_fini(struct radeon_device *rdev); uint32_t rs690_mc_rreg(struct radeon_device *rdev, uint32_t reg); void rs690_mc_wreg(struct radeon_device *rdev, uint32_t reg, uint32_t v); +void rs690_bandwidth_update(struct radeon_device *rdev); static struct radeon_asic rs690_asic = { .init = &r300_init, .errata = &rs690_errata, @@ -337,6 +345,7 @@ static struct radeon_asic rs690_asic = { .set_clock_gating = &radeon_atom_set_clock_gating, .set_surface_reg = r100_set_surface_reg, .clear_surface_reg = r100_clear_surface_reg, + .bandwidth_update = &rs690_bandwidth_update, }; @@ -354,6 +363,7 @@ void rv515_mc_wreg(struct radeon_device *rdev, uint32_t reg, uint32_t v); void rv515_ring_start(struct radeon_device *rdev); uint32_t rv515_pcie_rreg(struct radeon_device *rdev, uint32_t reg); void rv515_pcie_wreg(struct radeon_device *rdev, uint32_t reg, uint32_t v); +void rv515_bandwidth_update(struct radeon_device *rdev); static struct radeon_asic rv515_asic = { .init = &rv515_init, .errata = &rv515_errata, @@ -384,6 +394,7 @@ static struct radeon_asic rv515_asic = { .set_clock_gating = &radeon_atom_set_clock_gating, .set_surface_reg = r100_set_surface_reg, .clear_surface_reg = r100_clear_surface_reg, + .bandwidth_update = &rv515_bandwidth_update, }; @@ -394,6 +405,7 @@ void r520_errata(struct radeon_device *rdev); void r520_vram_info(struct radeon_device *rdev); int r520_mc_init(struct radeon_device *rdev); void r520_mc_fini(struct radeon_device *rdev); +void r520_bandwidth_update(struct radeon_device *rdev); static struct radeon_asic r520_asic = { .init = &rv515_init, .errata = &r520_errata, @@ -424,6 +436,7 @@ static struct radeon_asic r520_asic = { .set_clock_gating = &radeon_atom_set_clock_gating, .set_surface_reg = r100_set_surface_reg, .clear_surface_reg = r100_clear_surface_reg, + .bandwidth_update = &r520_bandwidth_update, }; /* diff --git a/drivers/gpu/drm/radeon/radeon_device.c b/drivers/gpu/drm/radeon/radeon_device.c index f23083bbba3..f78db5c8008 100644 --- a/drivers/gpu/drm/radeon/radeon_device.c +++ b/drivers/gpu/drm/radeon/radeon_device.c @@ -561,6 +561,11 @@ int radeon_device_init(struct radeon_device *rdev, radeon_combios_asic_init(rdev->ddev); } } + /* Initialize clocks */ + r = radeon_clocks_init(rdev); + if (r) { + return r; + } /* Get vram informations */ radeon_vram_info(rdev); @@ -572,11 +577,6 @@ int radeon_device_init(struct radeon_device *rdev, (unsigned)rdev->mc.aper_size >> 20); DRM_INFO("RAM width %dbits %cDR\n", rdev->mc.vram_width, rdev->mc.vram_is_ddr ? 'D' : 'S'); - /* Initialize clocks */ - r = radeon_clocks_init(rdev); - if (r) { - return r; - } /* Initialize memory controller (also test AGP) */ r = radeon_mc_init(rdev); if (r) { diff --git a/drivers/gpu/drm/radeon/radeon_display.c b/drivers/gpu/drm/radeon/radeon_display.c index bc312f3d9a0..a8fa1bb84cf 100644 --- a/drivers/gpu/drm/radeon/radeon_display.c +++ b/drivers/gpu/drm/radeon/radeon_display.c @@ -187,6 +187,7 @@ static void radeon_crtc_init(struct drm_device *dev, int index) drm_mode_crtc_set_gamma_size(&radeon_crtc->base, 256); radeon_crtc->crtc_id = index; + rdev->mode_info.crtcs[index] = radeon_crtc; radeon_crtc->mode_set.crtc = &radeon_crtc->base; radeon_crtc->mode_set.connectors = (struct drm_connector **)(radeon_crtc + 1); @@ -661,36 +662,51 @@ void radeon_modeset_fini(struct radeon_device *rdev) } } -void radeon_init_disp_bandwidth(struct drm_device *dev) +bool radeon_crtc_scaling_mode_fixup(struct drm_crtc *crtc, + struct drm_display_mode *mode, + struct drm_display_mode *adjusted_mode) { - struct radeon_device *rdev = dev->dev_private; - struct drm_display_mode *modes[2]; - int pixel_bytes[2]; - struct drm_crtc *crtc; - - pixel_bytes[0] = pixel_bytes[1] = 0; - modes[0] = modes[1] = NULL; - - list_for_each_entry(crtc, &dev->mode_config.crtc_list, head) { - struct radeon_crtc *radeon_crtc = to_radeon_crtc(crtc); + struct drm_device *dev = crtc->dev; + struct drm_encoder *encoder; + struct radeon_crtc *radeon_crtc = to_radeon_crtc(crtc); + struct radeon_encoder *radeon_encoder; + bool first = true; - if (crtc->enabled && crtc->fb) { - modes[radeon_crtc->crtc_id] = &crtc->mode; - pixel_bytes[radeon_crtc->crtc_id] = crtc->fb->bits_per_pixel / 8; + list_for_each_entry(encoder, &dev->mode_config.encoder_list, head) { + radeon_encoder = to_radeon_encoder(encoder); + if (encoder->crtc != crtc) + continue; + if (first) { + radeon_crtc->rmx_type = radeon_encoder->rmx_type; + radeon_crtc->devices = radeon_encoder->devices; + memcpy(&radeon_crtc->native_mode, + &radeon_encoder->native_mode, + sizeof(struct radeon_native_mode)); + first = false; + } else { + if (radeon_crtc->rmx_type != radeon_encoder->rmx_type) { + /* WARNING: Right now this can't happen but + * in the future we need to check that scaling + * are consistent accross different encoder + * (ie all encoder can work with the same + * scaling). + */ + DRM_ERROR("Scaling not consistent accross encoder.\n"); + return false; + } } } - - if (ASIC_IS_AVIVO(rdev)) { - radeon_init_disp_bw_avivo(dev, - modes[0], - pixel_bytes[0], - modes[1], - pixel_bytes[1]); + if (radeon_crtc->rmx_type != RMX_OFF) { + fixed20_12 a, b; + a.full = rfixed_const(crtc->mode.vdisplay); + b.full = rfixed_const(radeon_crtc->native_mode.panel_xres); + radeon_crtc->vsc.full = rfixed_div(a, b); + a.full = rfixed_const(crtc->mode.hdisplay); + b.full = rfixed_const(radeon_crtc->native_mode.panel_yres); + radeon_crtc->hsc.full = rfixed_div(a, b); } else { - radeon_init_disp_bw_legacy(dev, - modes[0], - pixel_bytes[0], - modes[1], - pixel_bytes[1]); + radeon_crtc->vsc.full = rfixed_const(1); + radeon_crtc->hsc.full = rfixed_const(1); } + return true; } diff --git a/drivers/gpu/drm/radeon/radeon_encoders.c b/drivers/gpu/drm/radeon/radeon_encoders.c index ea15284e758..0a92706eac1 100644 --- a/drivers/gpu/drm/radeon/radeon_encoders.c +++ b/drivers/gpu/drm/radeon/radeon_encoders.c @@ -154,7 +154,6 @@ void radeon_rmx_mode_fixup(struct drm_encoder *encoder, if (mode->hdisplay < native_mode->panel_xres || mode->vdisplay < native_mode->panel_yres) { - radeon_encoder->flags |= RADEON_USE_RMX; if (ASIC_IS_AVIVO(rdev)) { adjusted_mode->hdisplay = native_mode->panel_xres; adjusted_mode->vdisplay = native_mode->panel_yres; @@ -197,15 +196,13 @@ void radeon_rmx_mode_fixup(struct drm_encoder *encoder, } } + static bool radeon_atom_mode_fixup(struct drm_encoder *encoder, struct drm_display_mode *mode, struct drm_display_mode *adjusted_mode) { - struct radeon_encoder *radeon_encoder = to_radeon_encoder(encoder); - radeon_encoder->flags &= ~RADEON_USE_RMX; - drm_mode_set_crtcinfo(adjusted_mode, 0); if (radeon_encoder->rmx_type != RMX_OFF) @@ -808,234 +805,6 @@ atombios_dig_transmitter_setup(struct drm_encoder *encoder, int action) } -static void atom_rv515_force_tv_scaler(struct radeon_device *rdev) -{ - - WREG32(0x659C, 0x0); - WREG32(0x6594, 0x705); - WREG32(0x65A4, 0x10001); - WREG32(0x65D8, 0x0); - WREG32(0x65B0, 0x0); - WREG32(0x65C0, 0x0); - WREG32(0x65D4, 0x0); - WREG32(0x6578, 0x0); - WREG32(0x657C, 0x841880A8); - WREG32(0x6578, 0x1); - WREG32(0x657C, 0x84208680); - WREG32(0x6578, 0x2); - WREG32(0x657C, 0xBFF880B0); - WREG32(0x6578, 0x100); - WREG32(0x657C, 0x83D88088); - WREG32(0x6578, 0x101); - WREG32(0x657C, 0x84608680); - WREG32(0x6578, 0x102); - WREG32(0x657C, 0xBFF080D0); - WREG32(0x6578, 0x200); - WREG32(0x657C, 0x83988068); - WREG32(0x6578, 0x201); - WREG32(0x657C, 0x84A08680); - WREG32(0x6578, 0x202); - WREG32(0x657C, 0xBFF080F8); - WREG32(0x6578, 0x300); - WREG32(0x657C, 0x83588058); - WREG32(0x6578, 0x301); - WREG32(0x657C, 0x84E08660); - WREG32(0x6578, 0x302); - WREG32(0x657C, 0xBFF88120); - WREG32(0x6578, 0x400); - WREG32(0x657C, 0x83188040); - WREG32(0x6578, 0x401); - WREG32(0x657C, 0x85008660); - WREG32(0x6578, 0x402); - WREG32(0x657C, 0xBFF88150); - WREG32(0x6578, 0x500); - WREG32(0x657C, 0x82D88030); - WREG32(0x6578, 0x501); - WREG32(0x657C, 0x85408640); - WREG32(0x6578, 0x502); - WREG32(0x657C, 0xBFF88180); - WREG32(0x6578, 0x600); - WREG32(0x657C, 0x82A08018); - WREG32(0x6578, 0x601); - WREG32(0x657C, 0x85808620); - WREG32(0x6578, 0x602); - WREG32(0x657C, 0xBFF081B8); - WREG32(0x6578, 0x700); - WREG32(0x657C, 0x82608010); - WREG32(0x6578, 0x701); - WREG32(0x657C, 0x85A08600); - WREG32(0x6578, 0x702); - WREG32(0x657C, 0x800081F0); - WREG32(0x6578, 0x800); - WREG32(0x657C, 0x8228BFF8); - WREG32(0x6578, 0x801); - WREG32(0x657C, 0x85E085E0); - WREG32(0x6578, 0x802); - WREG32(0x657C, 0xBFF88228); - WREG32(0x6578, 0x10000); - WREG32(0x657C, 0x82A8BF00); - WREG32(0x6578, 0x10001); - WREG32(0x657C, 0x82A08CC0); - WREG32(0x6578, 0x10002); - WREG32(0x657C, 0x8008BEF8); - WREG32(0x6578, 0x10100); - WREG32(0x657C, 0x81F0BF28); - WREG32(0x6578, 0x10101); - WREG32(0x657C, 0x83608CA0); - WREG32(0x6578, 0x10102); - WREG32(0x657C, 0x8018BED0); - WREG32(0x6578, 0x10200); - WREG32(0x657C, 0x8148BF38); - WREG32(0x6578, 0x10201); - WREG32(0x657C, 0x84408C80); - WREG32(0x6578, 0x10202); - WREG32(0x657C, 0x8008BEB8); - WREG32(0x6578, 0x10300); - WREG32(0x657C, 0x80B0BF78); - WREG32(0x6578, 0x10301); - WREG32(0x657C, 0x85008C20); - WREG32(0x6578, 0x10302); - WREG32(0x657C, 0x8020BEA0); - WREG32(0x6578, 0x10400); - WREG32(0x657C, 0x8028BF90); - WREG32(0x6578, 0x10401); - WREG32(0x657C, 0x85E08BC0); - WREG32(0x6578, 0x10402); - WREG32(0x657C, 0x8018BE90); - WREG32(0x6578, 0x10500); - WREG32(0x657C, 0xBFB8BFB0); - WREG32(0x6578, 0x10501); - WREG32(0x657C, 0x86C08B40); - WREG32(0x6578, 0x10502); - WREG32(0x657C, 0x8010BE90); - WREG32(0x6578, 0x10600); - WREG32(0x657C, 0xBF58BFC8); - WREG32(0x6578, 0x10601); - WREG32(0x657C, 0x87A08AA0); - WREG32(0x6578, 0x10602); - WREG32(0x657C, 0x8010BE98); - WREG32(0x6578, 0x10700); - WREG32(0x657C, 0xBF10BFF0); - WREG32(0x6578, 0x10701); - WREG32(0x657C, 0x886089E0); - WREG32(0x6578, 0x10702); - WREG32(0x657C, 0x8018BEB0); - WREG32(0x6578, 0x10800); - WREG32(0x657C, 0xBED8BFE8); - WREG32(0x6578, 0x10801); - WREG32(0x657C, 0x89408940); - WREG32(0x6578, 0x10802); - WREG32(0x657C, 0xBFE8BED8); - WREG32(0x6578, 0x20000); - WREG32(0x657C, 0x80008000); - WREG32(0x6578, 0x20001); - WREG32(0x657C, 0x90008000); - WREG32(0x6578, 0x20002); - WREG32(0x657C, 0x80008000); - WREG32(0x6578, 0x20003); - WREG32(0x657C, 0x80008000); - WREG32(0x6578, 0x20100); - WREG32(0x657C, 0x80108000); - WREG32(0x6578, 0x20101); - WREG32(0x657C, 0x8FE0BF70); - WREG32(0x6578, 0x20102); - WREG32(0x657C, 0xBFE880C0); - WREG32(0x6578, 0x20103); - WREG32(0x657C, 0x80008000); - WREG32(0x6578, 0x20200); - WREG32(0x657C, 0x8018BFF8); - WREG32(0x6578, 0x20201); - WREG32(0x657C, 0x8F80BF08); - WREG32(0x6578, 0x20202); - WREG32(0x657C, 0xBFD081A0); - WREG32(0x6578, 0x20203); - WREG32(0x657C, 0xBFF88000); - WREG32(0x6578, 0x20300); - WREG32(0x657C, 0x80188000); - WREG32(0x6578, 0x20301); - WREG32(0x657C, 0x8EE0BEC0); - WREG32(0x6578, 0x20302); - WREG32(0x657C, 0xBFB082A0); - WREG32(0x6578, 0x20303); - WREG32(0x657C, 0x80008000); - WREG32(0x6578, 0x20400); - WREG32(0x657C, 0x80188000); - WREG32(0x6578, 0x20401); - WREG32(0x657C, 0x8E00BEA0); - WREG32(0x6578, 0x20402); - WREG32(0x657C, 0xBF8883C0); - WREG32(0x6578, 0x20403); - WREG32(0x657C, 0x80008000); - WREG32(0x6578, 0x20500); - WREG32(0x657C, 0x80188000); - WREG32(0x6578, 0x20501); - WREG32(0x657C, 0x8D00BE90); - WREG32(0x6578, 0x20502); - WREG32(0x657C, 0xBF588500); - WREG32(0x6578, 0x20503); - WREG32(0x657C, 0x80008008); - WREG32(0x6578, 0x20600); - WREG32(0x657C, 0x80188000); - WREG32(0x6578, 0x20601); - WREG32(0x657C, 0x8BC0BE98); - WREG32(0x6578, 0x20602); - WREG32(0x657C, 0xBF308660); - WREG32(0x6578, 0x20603); - WREG32(0x657C, 0x80008008); - WREG32(0x6578, 0x20700); - WREG32(0x657C, 0x80108000); - WREG32(0x6578, 0x20701); - WREG32(0x657C, 0x8A80BEB0); - WREG32(0x6578, 0x20702); - WREG32(0x657C, 0xBF0087C0); - WREG32(0x6578, 0x20703); - WREG32(0x657C, 0x80008008); - WREG32(0x6578, 0x20800); - WREG32(0x657C, 0x80108000); - WREG32(0x6578, 0x20801); - WREG32(0x657C, 0x8920BED0); - WREG32(0x6578, 0x20802); - WREG32(0x657C, 0xBED08920); - WREG32(0x6578, 0x20803); - WREG32(0x657C, 0x80008010); - WREG32(0x6578, 0x30000); - WREG32(0x657C, 0x90008000); - WREG32(0x6578, 0x30001); - WREG32(0x657C, 0x80008000); - WREG32(0x6578, 0x30100); - WREG32(0x657C, 0x8FE0BF90); - WREG32(0x6578, 0x30101); - WREG32(0x657C, 0xBFF880A0); - WREG32(0x6578, 0x30200); - WREG32(0x657C, 0x8F60BF40); - WREG32(0x6578, 0x30201); - WREG32(0x657C, 0xBFE88180); - WREG32(0x6578, 0x30300); - WREG32(0x657C, 0x8EC0BF00); - WREG32(0x6578, 0x30301); - WREG32(0x657C, 0xBFC88280); - WREG32(0x6578, 0x30400); - WREG32(0x657C, 0x8DE0BEE0); - WREG32(0x6578, 0x30401); - WREG32(0x657C, 0xBFA083A0); - WREG32(0x6578, 0x30500); - WREG32(0x657C, 0x8CE0BED0); - WREG32(0x6578, 0x30501); - WREG32(0x657C, 0xBF7884E0); - WREG32(0x6578, 0x30600); - WREG32(0x657C, 0x8BA0BED8); - WREG32(0x6578, 0x30601); - WREG32(0x657C, 0xBF508640); - WREG32(0x6578, 0x30700); - WREG32(0x657C, 0x8A60BEE8); - WREG32(0x6578, 0x30701); - WREG32(0x657C, 0xBF2087A0); - WREG32(0x6578, 0x30800); - WREG32(0x657C, 0x8900BF00); - WREG32(0x6578, 0x30801); - WREG32(0x657C, 0xBF008900); -} - static void atombios_yuv_setup(struct drm_encoder *encoder, bool enable) { @@ -1073,129 +842,6 @@ atombios_yuv_setup(struct drm_encoder *encoder, bool enable) WREG32(reg, temp); } -static void -atombios_overscan_setup(struct drm_encoder *encoder, - struct drm_display_mode *mode, - struct drm_display_mode *adjusted_mode) -{ - struct drm_device *dev = encoder->dev; - struct radeon_device *rdev = dev->dev_private; - struct radeon_encoder *radeon_encoder = to_radeon_encoder(encoder); - struct radeon_crtc *radeon_crtc = to_radeon_crtc(encoder->crtc); - SET_CRTC_OVERSCAN_PS_ALLOCATION args; - int index = GetIndexIntoMasterTable(COMMAND, SetCRTC_OverScan); - - memset(&args, 0, sizeof(args)); - - args.usOverscanRight = 0; - args.usOverscanLeft = 0; - args.usOverscanBottom = 0; - args.usOverscanTop = 0; - args.ucCRTC = radeon_crtc->crtc_id; - - if (radeon_encoder->flags & RADEON_USE_RMX) { - if (radeon_encoder->rmx_type == RMX_FULL) { - args.usOverscanRight = 0; - args.usOverscanLeft = 0; - args.usOverscanBottom = 0; - args.usOverscanTop = 0; - } else if (radeon_encoder->rmx_type == RMX_CENTER) { - args.usOverscanTop = (adjusted_mode->crtc_vdisplay - mode->crtc_vdisplay) / 2; - args.usOverscanBottom = (adjusted_mode->crtc_vdisplay - mode->crtc_vdisplay) / 2; - args.usOverscanLeft = (adjusted_mode->crtc_hdisplay - mode->crtc_hdisplay) / 2; - args.usOverscanRight = (adjusted_mode->crtc_hdisplay - mode->crtc_hdisplay) / 2; - } else if (radeon_encoder->rmx_type == RMX_ASPECT) { - int a1 = mode->crtc_vdisplay * adjusted_mode->crtc_hdisplay; - int a2 = adjusted_mode->crtc_vdisplay * mode->crtc_hdisplay; - - if (a1 > a2) { - args.usOverscanLeft = (adjusted_mode->crtc_hdisplay - (a2 / mode->crtc_vdisplay)) / 2; - args.usOverscanRight = (adjusted_mode->crtc_hdisplay - (a2 / mode->crtc_vdisplay)) / 2; - } else if (a2 > a1) { - args.usOverscanLeft = (adjusted_mode->crtc_vdisplay - (a1 / mode->crtc_hdisplay)) / 2; - args.usOverscanRight = (adjusted_mode->crtc_vdisplay - (a1 / mode->crtc_hdisplay)) / 2; - } - } - } - - atom_execute_table(rdev->mode_info.atom_context, index, (uint32_t *)&args); - -} - -static void -atombios_scaler_setup(struct drm_encoder *encoder) -{ - struct drm_device *dev = encoder->dev; - struct radeon_device *rdev = dev->dev_private; - struct radeon_encoder *radeon_encoder = to_radeon_encoder(encoder); - struct radeon_crtc *radeon_crtc = to_radeon_crtc(encoder->crtc); - ENABLE_SCALER_PS_ALLOCATION args; - int index = GetIndexIntoMasterTable(COMMAND, EnableScaler); - /* fixme - fill in enc_priv for atom dac */ - enum radeon_tv_std tv_std = TV_STD_NTSC; - - if (!ASIC_IS_AVIVO(rdev) && radeon_crtc->crtc_id) - return; - - memset(&args, 0, sizeof(args)); - - args.ucScaler = radeon_crtc->crtc_id; - - if (radeon_encoder->devices & (ATOM_DEVICE_TV_SUPPORT)) { - switch (tv_std) { - case TV_STD_NTSC: - default: - args.ucTVStandard = ATOM_TV_NTSC; - break; - case TV_STD_PAL: - args.ucTVStandard = ATOM_TV_PAL; - break; - case TV_STD_PAL_M: - args.ucTVStandard = ATOM_TV_PALM; - break; - case TV_STD_PAL_60: - args.ucTVStandard = ATOM_TV_PAL60; - break; - case TV_STD_NTSC_J: - args.ucTVStandard = ATOM_TV_NTSCJ; - break; - case TV_STD_SCART_PAL: - args.ucTVStandard = ATOM_TV_PAL; /* ??? */ - break; - case TV_STD_SECAM: - args.ucTVStandard = ATOM_TV_SECAM; - break; - case TV_STD_PAL_CN: - args.ucTVStandard = ATOM_TV_PALCN; - break; - } - args.ucEnable = SCALER_ENABLE_MULTITAP_MODE; - } else if (radeon_encoder->devices & (ATOM_DEVICE_CV_SUPPORT)) { - args.ucTVStandard = ATOM_TV_CV; - args.ucEnable = SCALER_ENABLE_MULTITAP_MODE; - } else if (radeon_encoder->flags & RADEON_USE_RMX) { - if (radeon_encoder->rmx_type == RMX_FULL) - args.ucEnable = ATOM_SCALER_EXPANSION; - else if (radeon_encoder->rmx_type == RMX_CENTER) - args.ucEnable = ATOM_SCALER_CENTER; - else if (radeon_encoder->rmx_type == RMX_ASPECT) - args.ucEnable = ATOM_SCALER_EXPANSION; - } else { - if (ASIC_IS_AVIVO(rdev)) - args.ucEnable = ATOM_SCALER_DISABLE; - else - args.ucEnable = ATOM_SCALER_CENTER; - } - - atom_execute_table(rdev->mode_info.atom_context, index, (uint32_t *)&args); - - if (radeon_encoder->devices & (ATOM_DEVICE_CV_SUPPORT | ATOM_DEVICE_TV_SUPPORT) - && rdev->family >= CHIP_RV515 && rdev->family <= CHIP_RV570) { - atom_rv515_force_tv_scaler(rdev); - } - -} - static void radeon_atom_encoder_dpms(struct drm_encoder *encoder, int mode) { @@ -1448,8 +1094,6 @@ radeon_atom_encoder_mode_set(struct drm_encoder *encoder, radeon_encoder->pixel_clock = adjusted_mode->clock; radeon_atombios_encoder_crtc_scratch_regs(encoder, radeon_crtc->crtc_id); - atombios_overscan_setup(encoder, mode, adjusted_mode); - atombios_scaler_setup(encoder); atombios_set_encoder_crtc_source(encoder); if (ASIC_IS_AVIVO(rdev)) { @@ -1667,6 +1311,7 @@ radeon_add_atom_encoder(struct drm_device *dev, uint32_t encoder_id, uint32_t su radeon_encoder->encoder_id = encoder_id; radeon_encoder->devices = supported_device; + radeon_encoder->rmx_type = RMX_OFF; switch (radeon_encoder->encoder_id) { case ENCODER_OBJECT_ID_INTERNAL_LVDS: @@ -1700,14 +1345,8 @@ radeon_add_atom_encoder(struct drm_device *dev, uint32_t encoder_id, uint32_t su case ENCODER_OBJECT_ID_INTERNAL_KLDSCP_LVTMA: case ENCODER_OBJECT_ID_INTERNAL_UNIPHY1: case ENCODER_OBJECT_ID_INTERNAL_UNIPHY2: - if (radeon_encoder->devices & (ATOM_DEVICE_LCD_SUPPORT)) { - radeon_encoder->rmx_type = RMX_FULL; - drm_encoder_init(dev, encoder, &radeon_atom_enc_funcs, DRM_MODE_ENCODER_LVDS); - radeon_encoder->enc_priv = radeon_atombios_get_lvds_info(radeon_encoder); - } else { - drm_encoder_init(dev, encoder, &radeon_atom_enc_funcs, DRM_MODE_ENCODER_TMDS); - radeon_encoder->enc_priv = radeon_atombios_set_dig_info(radeon_encoder); - } + drm_encoder_init(dev, encoder, &radeon_atom_enc_funcs, DRM_MODE_ENCODER_TMDS); + radeon_encoder->enc_priv = radeon_atombios_set_dig_info(radeon_encoder); drm_encoder_helper_add(encoder, &radeon_atom_dig_helper_funcs); break; } diff --git a/drivers/gpu/drm/radeon/radeon_legacy_crtc.c b/drivers/gpu/drm/radeon/radeon_legacy_crtc.c index 0613790e2a5..7d06dc98a42 100644 --- a/drivers/gpu/drm/radeon/radeon_legacy_crtc.c +++ b/drivers/gpu/drm/radeon/radeon_legacy_crtc.c @@ -29,6 +29,171 @@ #include "radeon_fixed.h" #include "radeon.h" +static void radeon_legacy_rmx_mode_set(struct drm_crtc *crtc, + struct drm_display_mode *mode, + struct drm_display_mode *adjusted_mode) +{ + struct drm_device *dev = crtc->dev; + struct radeon_device *rdev = dev->dev_private; + struct radeon_crtc *radeon_crtc = to_radeon_crtc(crtc); + int xres = mode->hdisplay; + int yres = mode->vdisplay; + bool hscale = true, vscale = true; + int hsync_wid; + int vsync_wid; + int hsync_start; + int blank_width; + u32 scale, inc, crtc_more_cntl; + u32 fp_horz_stretch, fp_vert_stretch, fp_horz_vert_active; + u32 fp_h_sync_strt_wid, fp_crtc_h_total_disp; + u32 fp_v_sync_strt_wid, fp_crtc_v_total_disp; + struct radeon_native_mode *native_mode = &radeon_crtc->native_mode; + + fp_vert_stretch = RREG32(RADEON_FP_VERT_STRETCH) & + (RADEON_VERT_STRETCH_RESERVED | + RADEON_VERT_AUTO_RATIO_INC); + fp_horz_stretch = RREG32(RADEON_FP_HORZ_STRETCH) & + (RADEON_HORZ_FP_LOOP_STRETCH | + RADEON_HORZ_AUTO_RATIO_INC); + + crtc_more_cntl = 0; + if ((rdev->family == CHIP_RS100) || + (rdev->family == CHIP_RS200)) { + /* This is to workaround the asic bug for RMX, some versions + of BIOS dosen't have this register initialized correctly. */ + crtc_more_cntl |= RADEON_CRTC_H_CUTOFF_ACTIVE_EN; + } + + + fp_crtc_h_total_disp = ((((mode->crtc_htotal / 8) - 1) & 0x3ff) + | ((((mode->crtc_hdisplay / 8) - 1) & 0x1ff) << 16)); + + hsync_wid = (mode->crtc_hsync_end - mode->crtc_hsync_start) / 8; + if (!hsync_wid) + hsync_wid = 1; + hsync_start = mode->crtc_hsync_start - 8; + + fp_h_sync_strt_wid = ((hsync_start & 0x1fff) + | ((hsync_wid & 0x3f) << 16) + | ((mode->flags & DRM_MODE_FLAG_NHSYNC) + ? RADEON_CRTC_H_SYNC_POL + : 0)); + + fp_crtc_v_total_disp = (((mode->crtc_vtotal - 1) & 0xffff) + | ((mode->crtc_vdisplay - 1) << 16)); + + vsync_wid = mode->crtc_vsync_end - mode->crtc_vsync_start; + if (!vsync_wid) + vsync_wid = 1; + + fp_v_sync_strt_wid = (((mode->crtc_vsync_start - 1) & 0xfff) + | ((vsync_wid & 0x1f) << 16) + | ((mode->flags & DRM_MODE_FLAG_NVSYNC) + ? RADEON_CRTC_V_SYNC_POL + : 0)); + + fp_horz_vert_active = 0; + + if (native_mode->panel_xres == 0 || + native_mode->panel_yres == 0) { + hscale = false; + vscale = false; + } else { + if (xres > native_mode->panel_xres) + xres = native_mode->panel_xres; + if (yres > native_mode->panel_yres) + yres = native_mode->panel_yres; + + if (xres == native_mode->panel_xres) + hscale = false; + if (yres == native_mode->panel_yres) + vscale = false; + } + + switch (radeon_crtc->rmx_type) { + case RMX_FULL: + case RMX_ASPECT: + if (!hscale) + fp_horz_stretch |= ((xres/8-1) << 16); + else { + inc = (fp_horz_stretch & RADEON_HORZ_AUTO_RATIO_INC) ? 1 : 0; + scale = ((xres + inc) * RADEON_HORZ_STRETCH_RATIO_MAX) + / native_mode->panel_xres + 1; + fp_horz_stretch |= (((scale) & RADEON_HORZ_STRETCH_RATIO_MASK) | + RADEON_HORZ_STRETCH_BLEND | + RADEON_HORZ_STRETCH_ENABLE | + ((native_mode->panel_xres/8-1) << 16)); + } + + if (!vscale) + fp_vert_stretch |= ((yres-1) << 12); + else { + inc = (fp_vert_stretch & RADEON_VERT_AUTO_RATIO_INC) ? 1 : 0; + scale = ((yres + inc) * RADEON_VERT_STRETCH_RATIO_MAX) + / native_mode->panel_yres + 1; + fp_vert_stretch |= (((scale) & RADEON_VERT_STRETCH_RATIO_MASK) | + RADEON_VERT_STRETCH_ENABLE | + RADEON_VERT_STRETCH_BLEND | + ((native_mode->panel_yres-1) << 12)); + } + break; + case RMX_CENTER: + fp_horz_stretch |= ((xres/8-1) << 16); + fp_vert_stretch |= ((yres-1) << 12); + + crtc_more_cntl |= (RADEON_CRTC_AUTO_HORZ_CENTER_EN | + RADEON_CRTC_AUTO_VERT_CENTER_EN); + + blank_width = (mode->crtc_hblank_end - mode->crtc_hblank_start) / 8; + if (blank_width > 110) + blank_width = 110; + + fp_crtc_h_total_disp = (((blank_width) & 0x3ff) + | ((((mode->crtc_hdisplay / 8) - 1) & 0x1ff) << 16)); + + hsync_wid = (mode->crtc_hsync_end - mode->crtc_hsync_start) / 8; + if (!hsync_wid) + hsync_wid = 1; + + fp_h_sync_strt_wid = ((((mode->crtc_hsync_start - mode->crtc_hblank_start) / 8) & 0x1fff) + | ((hsync_wid & 0x3f) << 16) + | ((mode->flags & DRM_MODE_FLAG_NHSYNC) + ? RADEON_CRTC_H_SYNC_POL + : 0)); + + fp_crtc_v_total_disp = (((mode->crtc_vblank_end - mode->crtc_vblank_start) & 0xffff) + | ((mode->crtc_vdisplay - 1) << 16)); + + vsync_wid = mode->crtc_vsync_end - mode->crtc_vsync_start; + if (!vsync_wid) + vsync_wid = 1; + + fp_v_sync_strt_wid = ((((mode->crtc_vsync_start - mode->crtc_vblank_start) & 0xfff) + | ((vsync_wid & 0x1f) << 16) + | ((mode->flags & DRM_MODE_FLAG_NVSYNC) + ? RADEON_CRTC_V_SYNC_POL + : 0))); + + fp_horz_vert_active = (((native_mode->panel_yres) & 0xfff) | + (((native_mode->panel_xres / 8) & 0x1ff) << 16)); + break; + case RMX_OFF: + default: + fp_horz_stretch |= ((xres/8-1) << 16); + fp_vert_stretch |= ((yres-1) << 12); + break; + } + + WREG32(RADEON_FP_HORZ_STRETCH, fp_horz_stretch); + WREG32(RADEON_FP_VERT_STRETCH, fp_vert_stretch); + WREG32(RADEON_CRTC_MORE_CNTL, crtc_more_cntl); + WREG32(RADEON_FP_HORZ_VERT_ACTIVE, fp_horz_vert_active); + WREG32(RADEON_FP_H_SYNC_STRT_WID, fp_h_sync_strt_wid); + WREG32(RADEON_FP_V_SYNC_STRT_WID, fp_v_sync_strt_wid); + WREG32(RADEON_FP_CRTC_H_TOTAL_DISP, fp_crtc_h_total_disp); + WREG32(RADEON_FP_CRTC_V_TOTAL_DISP, fp_crtc_v_total_disp); +} + void radeon_restore_common_regs(struct drm_device *dev) { /* don't need this yet */ @@ -757,6 +922,8 @@ static bool radeon_crtc_mode_fixup(struct drm_crtc *crtc, struct drm_display_mode *mode, struct drm_display_mode *adjusted_mode) { + if (!radeon_crtc_scaling_mode_fixup(crtc, mode, adjusted_mode)) + return false; return true; } @@ -765,16 +932,25 @@ static int radeon_crtc_mode_set(struct drm_crtc *crtc, struct drm_display_mode *adjusted_mode, int x, int y, struct drm_framebuffer *old_fb) { - - DRM_DEBUG("\n"); + struct radeon_crtc *radeon_crtc = to_radeon_crtc(crtc); + struct drm_device *dev = crtc->dev; + struct radeon_device *rdev = dev->dev_private; /* TODO TV */ - radeon_crtc_set_base(crtc, x, y, old_fb); radeon_set_crtc_timing(crtc, adjusted_mode); radeon_set_pll(crtc, adjusted_mode); - radeon_init_disp_bandwidth(crtc->dev); - + radeon_bandwidth_update(rdev); + if (radeon_crtc->crtc_id == 0) { + radeon_legacy_rmx_mode_set(crtc, mode, adjusted_mode); + } else { + if (radeon_crtc->rmx_type != RMX_OFF) { + /* FIXME: only first crtc has rmx what should we + * do ? + */ + DRM_ERROR("Mode need scaling but only first crtc can do that.\n"); + } + } return 0; } @@ -805,478 +981,3 @@ void radeon_legacy_init_crtc(struct drm_device *dev, radeon_crtc->crtc_offset = RADEON_CRTC2_H_TOTAL_DISP - RADEON_CRTC_H_TOTAL_DISP; drm_crtc_helper_add(&radeon_crtc->base, &legacy_helper_funcs); } - -void radeon_init_disp_bw_legacy(struct drm_device *dev, - struct drm_display_mode *mode1, - uint32_t pixel_bytes1, - struct drm_display_mode *mode2, - uint32_t pixel_bytes2) -{ - struct radeon_device *rdev = dev->dev_private; - fixed20_12 trcd_ff, trp_ff, tras_ff, trbs_ff, tcas_ff; - fixed20_12 sclk_ff, mclk_ff, sclk_eff_ff, sclk_delay_ff; - fixed20_12 peak_disp_bw, mem_bw, pix_clk, pix_clk2, temp_ff, crit_point_ff; - uint32_t temp, data, mem_trcd, mem_trp, mem_tras; - fixed20_12 memtcas_ff[8] = { - fixed_init(1), - fixed_init(2), - fixed_init(3), - fixed_init(0), - fixed_init_half(1), - fixed_init_half(2), - fixed_init(0), - }; - fixed20_12 memtcas_rs480_ff[8] = { - fixed_init(0), - fixed_init(1), - fixed_init(2), - fixed_init(3), - fixed_init(0), - fixed_init_half(1), - fixed_init_half(2), - fixed_init_half(3), - }; - fixed20_12 memtcas2_ff[8] = { - fixed_init(0), - fixed_init(1), - fixed_init(2), - fixed_init(3), - fixed_init(4), - fixed_init(5), - fixed_init(6), - fixed_init(7), - }; - fixed20_12 memtrbs[8] = { - fixed_init(1), - fixed_init_half(1), - fixed_init(2), - fixed_init_half(2), - fixed_init(3), - fixed_init_half(3), - fixed_init(4), - fixed_init_half(4) - }; - fixed20_12 memtrbs_r4xx[8] = { - fixed_init(4), - fixed_init(5), - fixed_init(6), - fixed_init(7), - fixed_init(8), - fixed_init(9), - fixed_init(10), - fixed_init(11) - }; - fixed20_12 min_mem_eff; - fixed20_12 mc_latency_sclk, mc_latency_mclk, k1; - fixed20_12 cur_latency_mclk, cur_latency_sclk; - fixed20_12 disp_latency, disp_latency_overhead, disp_drain_rate, - disp_drain_rate2, read_return_rate; - fixed20_12 time_disp1_drop_priority; - int c; - int cur_size = 16; /* in octawords */ - int critical_point = 0, critical_point2; -/* uint32_t read_return_rate, time_disp1_drop_priority; */ - int stop_req, max_stop_req; - - min_mem_eff.full = rfixed_const_8(0); - /* get modes */ - if ((rdev->disp_priority == 2) && ASIC_IS_R300(rdev)) { - uint32_t mc_init_misc_lat_timer = RREG32(R300_MC_INIT_MISC_LAT_TIMER); - mc_init_misc_lat_timer &= ~(R300_MC_DISP1R_INIT_LAT_MASK << R300_MC_DISP1R_INIT_LAT_SHIFT); - mc_init_misc_lat_timer &= ~(R300_MC_DISP0R_INIT_LAT_MASK << R300_MC_DISP0R_INIT_LAT_SHIFT); - /* check crtc enables */ - if (mode2) - mc_init_misc_lat_timer |= (1 << R300_MC_DISP1R_INIT_LAT_SHIFT); - if (mode1) - mc_init_misc_lat_timer |= (1 << R300_MC_DISP0R_INIT_LAT_SHIFT); - WREG32(R300_MC_INIT_MISC_LAT_TIMER, mc_init_misc_lat_timer); - } - - /* - * determine is there is enough bw for current mode - */ - mclk_ff.full = rfixed_const(rdev->clock.default_mclk); - temp_ff.full = rfixed_const(100); - mclk_ff.full = rfixed_div(mclk_ff, temp_ff); - sclk_ff.full = rfixed_const(rdev->clock.default_sclk); - sclk_ff.full = rfixed_div(sclk_ff, temp_ff); - - temp = (rdev->mc.vram_width / 8) * (rdev->mc.vram_is_ddr ? 2 : 1); - temp_ff.full = rfixed_const(temp); - mem_bw.full = rfixed_mul(mclk_ff, temp_ff); - - pix_clk.full = 0; - pix_clk2.full = 0; - peak_disp_bw.full = 0; - if (mode1) { - temp_ff.full = rfixed_const(1000); - pix_clk.full = rfixed_const(mode1->clock); /* convert to fixed point */ - pix_clk.full = rfixed_div(pix_clk, temp_ff); - temp_ff.full = rfixed_const(pixel_bytes1); - peak_disp_bw.full += rfixed_mul(pix_clk, temp_ff); - } - if (mode2) { - temp_ff.full = rfixed_const(1000); - pix_clk2.full = rfixed_const(mode2->clock); /* convert to fixed point */ - pix_clk2.full = rfixed_div(pix_clk2, temp_ff); - temp_ff.full = rfixed_const(pixel_bytes2); - peak_disp_bw.full += rfixed_mul(pix_clk2, temp_ff); - } - - mem_bw.full = rfixed_mul(mem_bw, min_mem_eff); - if (peak_disp_bw.full >= mem_bw.full) { - DRM_ERROR("You may not have enough display bandwidth for current mode\n" - "If you have flickering problem, try to lower resolution, refresh rate, or color depth\n"); - } - - /* Get values from the EXT_MEM_CNTL register...converting its contents. */ - temp = RREG32(RADEON_MEM_TIMING_CNTL); - if ((rdev->family == CHIP_RV100) || (rdev->flags & RADEON_IS_IGP)) { /* RV100, M6, IGPs */ - mem_trcd = ((temp >> 2) & 0x3) + 1; - mem_trp = ((temp & 0x3)) + 1; - mem_tras = ((temp & 0x70) >> 4) + 1; - } else if (rdev->family == CHIP_R300 || - rdev->family == CHIP_R350) { /* r300, r350 */ - mem_trcd = (temp & 0x7) + 1; - mem_trp = ((temp >> 8) & 0x7) + 1; - mem_tras = ((temp >> 11) & 0xf) + 4; - } else if (rdev->family == CHIP_RV350 || - rdev->family <= CHIP_RV380) { - /* rv3x0 */ - mem_trcd = (temp & 0x7) + 3; - mem_trp = ((temp >> 8) & 0x7) + 3; - mem_tras = ((temp >> 11) & 0xf) + 6; - } else if (rdev->family == CHIP_R420 || - rdev->family == CHIP_R423 || - rdev->family == CHIP_RV410) { - /* r4xx */ - mem_trcd = (temp & 0xf) + 3; - if (mem_trcd > 15) - mem_trcd = 15; - mem_trp = ((temp >> 8) & 0xf) + 3; - if (mem_trp > 15) - mem_trp = 15; - mem_tras = ((temp >> 12) & 0x1f) + 6; - if (mem_tras > 31) - mem_tras = 31; - } else { /* RV200, R200 */ - mem_trcd = (temp & 0x7) + 1; - mem_trp = ((temp >> 8) & 0x7) + 1; - mem_tras = ((temp >> 12) & 0xf) + 4; - } - /* convert to FF */ - trcd_ff.full = rfixed_const(mem_trcd); - trp_ff.full = rfixed_const(mem_trp); - tras_ff.full = rfixed_const(mem_tras); - - /* Get values from the MEM_SDRAM_MODE_REG register...converting its */ - temp = RREG32(RADEON_MEM_SDRAM_MODE_REG); - data = (temp & (7 << 20)) >> 20; - if ((rdev->family == CHIP_RV100) || rdev->flags & RADEON_IS_IGP) { - if (rdev->family == CHIP_RS480) /* don't think rs400 */ - tcas_ff = memtcas_rs480_ff[data]; - else - tcas_ff = memtcas_ff[data]; - } else - tcas_ff = memtcas2_ff[data]; - - if (rdev->family == CHIP_RS400 || - rdev->family == CHIP_RS480) { - /* extra cas latency stored in bits 23-25 0-4 clocks */ - data = (temp >> 23) & 0x7; - if (data < 5) - tcas_ff.full += rfixed_const(data); - } - - if (ASIC_IS_R300(rdev) && !(rdev->flags & RADEON_IS_IGP)) { - /* on the R300, Tcas is included in Trbs. - */ - temp = RREG32(RADEON_MEM_CNTL); - data = (R300_MEM_NUM_CHANNELS_MASK & temp); - if (data == 1) { - if (R300_MEM_USE_CD_CH_ONLY & temp) { - temp = RREG32(R300_MC_IND_INDEX); - temp &= ~R300_MC_IND_ADDR_MASK; - temp |= R300_MC_READ_CNTL_CD_mcind; - WREG32(R300_MC_IND_INDEX, temp); - temp = RREG32(R300_MC_IND_DATA); - data = (R300_MEM_RBS_POSITION_C_MASK & temp); - } else { - temp = RREG32(R300_MC_READ_CNTL_AB); - data = (R300_MEM_RBS_POSITION_A_MASK & temp); - } - } else { - temp = RREG32(R300_MC_READ_CNTL_AB); - data = (R300_MEM_RBS_POSITION_A_MASK & temp); - } - if (rdev->family == CHIP_RV410 || - rdev->family == CHIP_R420 || - rdev->family == CHIP_R423) - trbs_ff = memtrbs_r4xx[data]; - else - trbs_ff = memtrbs[data]; - tcas_ff.full += trbs_ff.full; - } - - sclk_eff_ff.full = sclk_ff.full; - - if (rdev->flags & RADEON_IS_AGP) { - fixed20_12 agpmode_ff; - agpmode_ff.full = rfixed_const(radeon_agpmode); - temp_ff.full = rfixed_const_666(16); - sclk_eff_ff.full -= rfixed_mul(agpmode_ff, temp_ff); - } - /* TODO PCIE lanes may affect this - agpmode == 16?? */ - - if (ASIC_IS_R300(rdev)) { - sclk_delay_ff.full = rfixed_const(250); - } else { - if ((rdev->family == CHIP_RV100) || - rdev->flags & RADEON_IS_IGP) { - if (rdev->mc.vram_is_ddr) - sclk_delay_ff.full = rfixed_const(41); - else - sclk_delay_ff.full = rfixed_const(33); - } else { - if (rdev->mc.vram_width == 128) - sclk_delay_ff.full = rfixed_const(57); - else - sclk_delay_ff.full = rfixed_const(41); - } - } - - mc_latency_sclk.full = rfixed_div(sclk_delay_ff, sclk_eff_ff); - - if (rdev->mc.vram_is_ddr) { - if (rdev->mc.vram_width == 32) { - k1.full = rfixed_const(40); - c = 3; - } else { - k1.full = rfixed_const(20); - c = 1; - } - } else { - k1.full = rfixed_const(40); - c = 3; - } - - temp_ff.full = rfixed_const(2); - mc_latency_mclk.full = rfixed_mul(trcd_ff, temp_ff); - temp_ff.full = rfixed_const(c); - mc_latency_mclk.full += rfixed_mul(tcas_ff, temp_ff); - temp_ff.full = rfixed_const(4); - mc_latency_mclk.full += rfixed_mul(tras_ff, temp_ff); - mc_latency_mclk.full += rfixed_mul(trp_ff, temp_ff); - mc_latency_mclk.full += k1.full; - - mc_latency_mclk.full = rfixed_div(mc_latency_mclk, mclk_ff); - mc_latency_mclk.full += rfixed_div(temp_ff, sclk_eff_ff); - - /* - HW cursor time assuming worst case of full size colour cursor. - */ - temp_ff.full = rfixed_const((2 * (cur_size - (rdev->mc.vram_is_ddr + 1)))); - temp_ff.full += trcd_ff.full; - if (temp_ff.full < tras_ff.full) - temp_ff.full = tras_ff.full; - cur_latency_mclk.full = rfixed_div(temp_ff, mclk_ff); - - temp_ff.full = rfixed_const(cur_size); - cur_latency_sclk.full = rfixed_div(temp_ff, sclk_eff_ff); - /* - Find the total latency for the display data. - */ - disp_latency_overhead.full = rfixed_const(80); - disp_latency_overhead.full = rfixed_div(disp_latency_overhead, sclk_ff); - mc_latency_mclk.full += disp_latency_overhead.full + cur_latency_mclk.full; - mc_latency_sclk.full += disp_latency_overhead.full + cur_latency_sclk.full; - - if (mc_latency_mclk.full > mc_latency_sclk.full) - disp_latency.full = mc_latency_mclk.full; - else - disp_latency.full = mc_latency_sclk.full; - - /* setup Max GRPH_STOP_REQ default value */ - if (ASIC_IS_RV100(rdev)) - max_stop_req = 0x5c; - else - max_stop_req = 0x7c; - - if (mode1) { - /* CRTC1 - Set GRPH_BUFFER_CNTL register using h/w defined optimal values. - GRPH_STOP_REQ <= MIN[ 0x7C, (CRTC_H_DISP + 1) * (bit depth) / 0x10 ] - */ - stop_req = mode1->hdisplay * pixel_bytes1 / 16; - - if (stop_req > max_stop_req) - stop_req = max_stop_req; - - /* - Find the drain rate of the display buffer. - */ - temp_ff.full = rfixed_const((16/pixel_bytes1)); - disp_drain_rate.full = rfixed_div(pix_clk, temp_ff); - - /* - Find the critical point of the display buffer. - */ - crit_point_ff.full = rfixed_mul(disp_drain_rate, disp_latency); - crit_point_ff.full += rfixed_const_half(0); - - critical_point = rfixed_trunc(crit_point_ff); - - if (rdev->disp_priority == 2) { - critical_point = 0; - } - - /* - The critical point should never be above max_stop_req-4. Setting - GRPH_CRITICAL_CNTL = 0 will thus force high priority all the time. - */ - if (max_stop_req - critical_point < 4) - critical_point = 0; - - if (critical_point == 0 && mode2 && rdev->family == CHIP_R300) { - /* some R300 cards have problem with this set to 0, when CRTC2 is enabled.*/ - critical_point = 0x10; - } - - temp = RREG32(RADEON_GRPH_BUFFER_CNTL); - temp &= ~(RADEON_GRPH_STOP_REQ_MASK); - temp |= (stop_req << RADEON_GRPH_STOP_REQ_SHIFT); - temp &= ~(RADEON_GRPH_START_REQ_MASK); - if ((rdev->family == CHIP_R350) && - (stop_req > 0x15)) { - stop_req -= 0x10; - } - temp |= (stop_req << RADEON_GRPH_START_REQ_SHIFT); - temp |= RADEON_GRPH_BUFFER_SIZE; - temp &= ~(RADEON_GRPH_CRITICAL_CNTL | - RADEON_GRPH_CRITICAL_AT_SOF | - RADEON_GRPH_STOP_CNTL); - /* - Write the result into the register. - */ - WREG32(RADEON_GRPH_BUFFER_CNTL, ((temp & ~RADEON_GRPH_CRITICAL_POINT_MASK) | - (critical_point << RADEON_GRPH_CRITICAL_POINT_SHIFT))); - -#if 0 - if ((rdev->family == CHIP_RS400) || - (rdev->family == CHIP_RS480)) { - /* attempt to program RS400 disp regs correctly ??? */ - temp = RREG32(RS400_DISP1_REG_CNTL); - temp &= ~(RS400_DISP1_START_REQ_LEVEL_MASK | - RS400_DISP1_STOP_REQ_LEVEL_MASK); - WREG32(RS400_DISP1_REQ_CNTL1, (temp | - (critical_point << RS400_DISP1_START_REQ_LEVEL_SHIFT) | - (critical_point << RS400_DISP1_STOP_REQ_LEVEL_SHIFT))); - temp = RREG32(RS400_DMIF_MEM_CNTL1); - temp &= ~(RS400_DISP1_CRITICAL_POINT_START_MASK | - RS400_DISP1_CRITICAL_POINT_STOP_MASK); - WREG32(RS400_DMIF_MEM_CNTL1, (temp | - (critical_point << RS400_DISP1_CRITICAL_POINT_START_SHIFT) | - (critical_point << RS400_DISP1_CRITICAL_POINT_STOP_SHIFT))); - } -#endif - - DRM_DEBUG("GRPH_BUFFER_CNTL from to %x\n", - /* (unsigned int)info->SavedReg->grph_buffer_cntl, */ - (unsigned int)RREG32(RADEON_GRPH_BUFFER_CNTL)); - } - - if (mode2) { - u32 grph2_cntl; - stop_req = mode2->hdisplay * pixel_bytes2 / 16; - - if (stop_req > max_stop_req) - stop_req = max_stop_req; - - /* - Find the drain rate of the display buffer. - */ - temp_ff.full = rfixed_const((16/pixel_bytes2)); - disp_drain_rate2.full = rfixed_div(pix_clk2, temp_ff); - - grph2_cntl = RREG32(RADEON_GRPH2_BUFFER_CNTL); - grph2_cntl &= ~(RADEON_GRPH_STOP_REQ_MASK); - grph2_cntl |= (stop_req << RADEON_GRPH_STOP_REQ_SHIFT); - grph2_cntl &= ~(RADEON_GRPH_START_REQ_MASK); - if ((rdev->family == CHIP_R350) && - (stop_req > 0x15)) { - stop_req -= 0x10; - } - grph2_cntl |= (stop_req << RADEON_GRPH_START_REQ_SHIFT); - grph2_cntl |= RADEON_GRPH_BUFFER_SIZE; - grph2_cntl &= ~(RADEON_GRPH_CRITICAL_CNTL | - RADEON_GRPH_CRITICAL_AT_SOF | - RADEON_GRPH_STOP_CNTL); - - if ((rdev->family == CHIP_RS100) || - (rdev->family == CHIP_RS200)) - critical_point2 = 0; - else { - temp = (rdev->mc.vram_width * rdev->mc.vram_is_ddr + 1)/128; - temp_ff.full = rfixed_const(temp); - temp_ff.full = rfixed_mul(mclk_ff, temp_ff); - if (sclk_ff.full < temp_ff.full) - temp_ff.full = sclk_ff.full; - - read_return_rate.full = temp_ff.full; - - if (mode1) { - temp_ff.full = read_return_rate.full - disp_drain_rate.full; - time_disp1_drop_priority.full = rfixed_div(crit_point_ff, temp_ff); - } else { - time_disp1_drop_priority.full = 0; - } - crit_point_ff.full = disp_latency.full + time_disp1_drop_priority.full + disp_latency.full; - crit_point_ff.full = rfixed_mul(crit_point_ff, disp_drain_rate2); - crit_point_ff.full += rfixed_const_half(0); - - critical_point2 = rfixed_trunc(crit_point_ff); - - if (rdev->disp_priority == 2) { - critical_point2 = 0; - } - - if (max_stop_req - critical_point2 < 4) - critical_point2 = 0; - - } - - if (critical_point2 == 0 && rdev->family == CHIP_R300) { - /* some R300 cards have problem with this set to 0 */ - critical_point2 = 0x10; - } - - WREG32(RADEON_GRPH2_BUFFER_CNTL, ((grph2_cntl & ~RADEON_GRPH_CRITICAL_POINT_MASK) | - (critical_point2 << RADEON_GRPH_CRITICAL_POINT_SHIFT))); - - if ((rdev->family == CHIP_RS400) || - (rdev->family == CHIP_RS480)) { -#if 0 - /* attempt to program RS400 disp2 regs correctly ??? */ - temp = RREG32(RS400_DISP2_REQ_CNTL1); - temp &= ~(RS400_DISP2_START_REQ_LEVEL_MASK | - RS400_DISP2_STOP_REQ_LEVEL_MASK); - WREG32(RS400_DISP2_REQ_CNTL1, (temp | - (critical_point2 << RS400_DISP1_START_REQ_LEVEL_SHIFT) | - (critical_point2 << RS400_DISP1_STOP_REQ_LEVEL_SHIFT))); - temp = RREG32(RS400_DISP2_REQ_CNTL2); - temp &= ~(RS400_DISP2_CRITICAL_POINT_START_MASK | - RS400_DISP2_CRITICAL_POINT_STOP_MASK); - WREG32(RS400_DISP2_REQ_CNTL2, (temp | - (critical_point2 << RS400_DISP2_CRITICAL_POINT_START_SHIFT) | - (critical_point2 << RS400_DISP2_CRITICAL_POINT_STOP_SHIFT))); -#endif - WREG32(RS400_DISP2_REQ_CNTL1, 0x105DC1CC); - WREG32(RS400_DISP2_REQ_CNTL2, 0x2749D000); - WREG32(RS400_DMIF_MEM_CNTL1, 0x29CA71DC); - WREG32(RS400_DISP1_REQ_CNTL1, 0x28FBC3AC); - } - - DRM_DEBUG("GRPH2_BUFFER_CNTL from to %x\n", - (unsigned int)RREG32(RADEON_GRPH2_BUFFER_CNTL)); - } -} diff --git a/drivers/gpu/drm/radeon/radeon_legacy_encoders.c b/drivers/gpu/drm/radeon/radeon_legacy_encoders.c index 2c2f42de1d4..34d0f58eb94 100644 --- a/drivers/gpu/drm/radeon/radeon_legacy_encoders.c +++ b/drivers/gpu/drm/radeon/radeon_legacy_encoders.c @@ -30,170 +30,6 @@ #include "atom.h" -static void radeon_legacy_rmx_mode_set(struct drm_encoder *encoder, - struct drm_display_mode *mode, - struct drm_display_mode *adjusted_mode) -{ - struct drm_device *dev = encoder->dev; - struct radeon_device *rdev = dev->dev_private; - struct radeon_encoder *radeon_encoder = to_radeon_encoder(encoder); - int xres = mode->hdisplay; - int yres = mode->vdisplay; - bool hscale = true, vscale = true; - int hsync_wid; - int vsync_wid; - int hsync_start; - uint32_t scale, inc; - uint32_t fp_horz_stretch, fp_vert_stretch, crtc_more_cntl, fp_horz_vert_active; - uint32_t fp_h_sync_strt_wid, fp_v_sync_strt_wid, fp_crtc_h_total_disp, fp_crtc_v_total_disp; - struct radeon_native_mode *native_mode = &radeon_encoder->native_mode; - - DRM_DEBUG("\n"); - - fp_vert_stretch = RREG32(RADEON_FP_VERT_STRETCH) & - (RADEON_VERT_STRETCH_RESERVED | - RADEON_VERT_AUTO_RATIO_INC); - fp_horz_stretch = RREG32(RADEON_FP_HORZ_STRETCH) & - (RADEON_HORZ_FP_LOOP_STRETCH | - RADEON_HORZ_AUTO_RATIO_INC); - - crtc_more_cntl = 0; - if ((rdev->family == CHIP_RS100) || - (rdev->family == CHIP_RS200)) { - /* This is to workaround the asic bug for RMX, some versions - of BIOS dosen't have this register initialized correctly. */ - crtc_more_cntl |= RADEON_CRTC_H_CUTOFF_ACTIVE_EN; - } - - - fp_crtc_h_total_disp = ((((mode->crtc_htotal / 8) - 1) & 0x3ff) - | ((((mode->crtc_hdisplay / 8) - 1) & 0x1ff) << 16)); - - hsync_wid = (mode->crtc_hsync_end - mode->crtc_hsync_start) / 8; - if (!hsync_wid) - hsync_wid = 1; - hsync_start = mode->crtc_hsync_start - 8; - - fp_h_sync_strt_wid = ((hsync_start & 0x1fff) - | ((hsync_wid & 0x3f) << 16) - | ((mode->flags & DRM_MODE_FLAG_NHSYNC) - ? RADEON_CRTC_H_SYNC_POL - : 0)); - - fp_crtc_v_total_disp = (((mode->crtc_vtotal - 1) & 0xffff) - | ((mode->crtc_vdisplay - 1) << 16)); - - vsync_wid = mode->crtc_vsync_end - mode->crtc_vsync_start; - if (!vsync_wid) - vsync_wid = 1; - - fp_v_sync_strt_wid = (((mode->crtc_vsync_start - 1) & 0xfff) - | ((vsync_wid & 0x1f) << 16) - | ((mode->flags & DRM_MODE_FLAG_NVSYNC) - ? RADEON_CRTC_V_SYNC_POL - : 0)); - - fp_horz_vert_active = 0; - - if (native_mode->panel_xres == 0 || - native_mode->panel_yres == 0) { - hscale = false; - vscale = false; - } else { - if (xres > native_mode->panel_xres) - xres = native_mode->panel_xres; - if (yres > native_mode->panel_yres) - yres = native_mode->panel_yres; - - if (xres == native_mode->panel_xres) - hscale = false; - if (yres == native_mode->panel_yres) - vscale = false; - } - - if (radeon_encoder->flags & RADEON_USE_RMX) { - if (radeon_encoder->rmx_type != RMX_CENTER) { - if (!hscale) - fp_horz_stretch |= ((xres/8-1) << 16); - else { - inc = (fp_horz_stretch & RADEON_HORZ_AUTO_RATIO_INC) ? 1 : 0; - scale = ((xres + inc) * RADEON_HORZ_STRETCH_RATIO_MAX) - / native_mode->panel_xres + 1; - fp_horz_stretch |= (((scale) & RADEON_HORZ_STRETCH_RATIO_MASK) | - RADEON_HORZ_STRETCH_BLEND | - RADEON_HORZ_STRETCH_ENABLE | - ((native_mode->panel_xres/8-1) << 16)); - } - - if (!vscale) - fp_vert_stretch |= ((yres-1) << 12); - else { - inc = (fp_vert_stretch & RADEON_VERT_AUTO_RATIO_INC) ? 1 : 0; - scale = ((yres + inc) * RADEON_VERT_STRETCH_RATIO_MAX) - / native_mode->panel_yres + 1; - fp_vert_stretch |= (((scale) & RADEON_VERT_STRETCH_RATIO_MASK) | - RADEON_VERT_STRETCH_ENABLE | - RADEON_VERT_STRETCH_BLEND | - ((native_mode->panel_yres-1) << 12)); - } - } else if (radeon_encoder->rmx_type == RMX_CENTER) { - int blank_width; - - fp_horz_stretch |= ((xres/8-1) << 16); - fp_vert_stretch |= ((yres-1) << 12); - - crtc_more_cntl |= (RADEON_CRTC_AUTO_HORZ_CENTER_EN | - RADEON_CRTC_AUTO_VERT_CENTER_EN); - - blank_width = (mode->crtc_hblank_end - mode->crtc_hblank_start) / 8; - if (blank_width > 110) - blank_width = 110; - - fp_crtc_h_total_disp = (((blank_width) & 0x3ff) - | ((((mode->crtc_hdisplay / 8) - 1) & 0x1ff) << 16)); - - hsync_wid = (mode->crtc_hsync_end - mode->crtc_hsync_start) / 8; - if (!hsync_wid) - hsync_wid = 1; - - fp_h_sync_strt_wid = ((((mode->crtc_hsync_start - mode->crtc_hblank_start) / 8) & 0x1fff) - | ((hsync_wid & 0x3f) << 16) - | ((mode->flags & DRM_MODE_FLAG_NHSYNC) - ? RADEON_CRTC_H_SYNC_POL - : 0)); - - fp_crtc_v_total_disp = (((mode->crtc_vblank_end - mode->crtc_vblank_start) & 0xffff) - | ((mode->crtc_vdisplay - 1) << 16)); - - vsync_wid = mode->crtc_vsync_end - mode->crtc_vsync_start; - if (!vsync_wid) - vsync_wid = 1; - - fp_v_sync_strt_wid = ((((mode->crtc_vsync_start - mode->crtc_vblank_start) & 0xfff) - | ((vsync_wid & 0x1f) << 16) - | ((mode->flags & DRM_MODE_FLAG_NVSYNC) - ? RADEON_CRTC_V_SYNC_POL - : 0))); - - fp_horz_vert_active = (((native_mode->panel_yres) & 0xfff) | - (((native_mode->panel_xres / 8) & 0x1ff) << 16)); - } - } else { - fp_horz_stretch |= ((xres/8-1) << 16); - fp_vert_stretch |= ((yres-1) << 12); - } - - WREG32(RADEON_FP_HORZ_STRETCH, fp_horz_stretch); - WREG32(RADEON_FP_VERT_STRETCH, fp_vert_stretch); - WREG32(RADEON_CRTC_MORE_CNTL, crtc_more_cntl); - WREG32(RADEON_FP_HORZ_VERT_ACTIVE, fp_horz_vert_active); - WREG32(RADEON_FP_H_SYNC_STRT_WID, fp_h_sync_strt_wid); - WREG32(RADEON_FP_V_SYNC_STRT_WID, fp_v_sync_strt_wid); - WREG32(RADEON_FP_CRTC_H_TOTAL_DISP, fp_crtc_h_total_disp); - WREG32(RADEON_FP_CRTC_V_TOTAL_DISP, fp_crtc_v_total_disp); - -} - static void radeon_legacy_lvds_dpms(struct drm_encoder *encoder, int mode) { struct drm_device *dev = encoder->dev; @@ -287,9 +123,6 @@ static void radeon_legacy_lvds_mode_set(struct drm_encoder *encoder, DRM_DEBUG("\n"); - if (radeon_crtc->crtc_id == 0) - radeon_legacy_rmx_mode_set(encoder, mode, adjusted_mode); - lvds_pll_cntl = RREG32(RADEON_LVDS_PLL_CNTL); lvds_pll_cntl &= ~RADEON_LVDS_PLL_EN; @@ -318,7 +151,7 @@ static void radeon_legacy_lvds_mode_set(struct drm_encoder *encoder, if (radeon_crtc->crtc_id == 0) { if (ASIC_IS_R300(rdev)) { - if (radeon_encoder->flags & RADEON_USE_RMX) + if (radeon_encoder->rmx_type != RMX_OFF) lvds_pll_cntl |= R300_LVDS_SRC_SEL_RMX; } else lvds_gen_cntl &= ~RADEON_LVDS_SEL_CRTC2; @@ -350,8 +183,6 @@ static bool radeon_legacy_lvds_mode_fixup(struct drm_encoder *encoder, drm_mode_set_crtcinfo(adjusted_mode, 0); - radeon_encoder->flags &= ~RADEON_USE_RMX; - if (radeon_encoder->rmx_type != RMX_OFF) radeon_rmx_mode_fixup(encoder, mode, adjusted_mode); @@ -455,9 +286,6 @@ static void radeon_legacy_primary_dac_mode_set(struct drm_encoder *encoder, DRM_DEBUG("\n"); - if (radeon_crtc->crtc_id == 0) - radeon_legacy_rmx_mode_set(encoder, mode, adjusted_mode); - if (radeon_crtc->crtc_id == 0) { if (rdev->family == CHIP_R200 || ASIC_IS_R300(rdev)) { disp_output_cntl = RREG32(RADEON_DISP_OUTPUT_CNTL) & @@ -653,9 +481,6 @@ static void radeon_legacy_tmds_int_mode_set(struct drm_encoder *encoder, DRM_DEBUG("\n"); - if (radeon_crtc->crtc_id == 0) - radeon_legacy_rmx_mode_set(encoder, mode, adjusted_mode); - tmp = tmds_pll_cntl = RREG32(RADEON_TMDS_PLL_CNTL); tmp &= 0xfffff; if (rdev->family == CHIP_RV280) { @@ -711,7 +536,7 @@ static void radeon_legacy_tmds_int_mode_set(struct drm_encoder *encoder, if (radeon_crtc->crtc_id == 0) { if (ASIC_IS_R300(rdev) || rdev->family == CHIP_R200) { fp_gen_cntl &= ~R200_FP_SOURCE_SEL_MASK; - if (radeon_encoder->flags & RADEON_USE_RMX) + if (radeon_encoder->rmx_type != RMX_OFF) fp_gen_cntl |= R200_FP_SOURCE_SEL_RMX; else fp_gen_cntl |= R200_FP_SOURCE_SEL_CRTC1; @@ -820,9 +645,6 @@ static void radeon_legacy_tmds_ext_mode_set(struct drm_encoder *encoder, DRM_DEBUG("\n"); - if (radeon_crtc->crtc_id == 0) - radeon_legacy_rmx_mode_set(encoder, mode, adjusted_mode); - if (rdev->is_atom_bios) { radeon_encoder->pixel_clock = adjusted_mode->clock; atombios_external_tmds_setup(encoder, ATOM_ENABLE); @@ -856,7 +678,7 @@ static void radeon_legacy_tmds_ext_mode_set(struct drm_encoder *encoder, if (radeon_crtc->crtc_id == 0) { if ((rdev->family == CHIP_R200) || ASIC_IS_R300(rdev)) { fp2_gen_cntl &= ~R200_FP2_SOURCE_SEL_MASK; - if (radeon_encoder->flags & RADEON_USE_RMX) + if (radeon_encoder->rmx_type != RMX_OFF) fp2_gen_cntl |= R200_FP2_SOURCE_SEL_RMX; else fp2_gen_cntl |= R200_FP2_SOURCE_SEL_CRTC1; @@ -1014,9 +836,6 @@ static void radeon_legacy_tv_dac_mode_set(struct drm_encoder *encoder, DRM_DEBUG("\n"); - if (radeon_crtc->crtc_id == 0) - radeon_legacy_rmx_mode_set(encoder, mode, adjusted_mode); - if (rdev->family != CHIP_R200) { tv_dac_cntl = RREG32(RADEON_TV_DAC_CNTL); if (rdev->family == CHIP_R420 || @@ -1243,6 +1062,7 @@ radeon_add_legacy_encoder(struct drm_device *dev, uint32_t encoder_id, uint32_t radeon_encoder->encoder_id = encoder_id; radeon_encoder->devices = supported_device; + radeon_encoder->rmx_type = RMX_OFF; switch (radeon_encoder->encoder_id) { case ENCODER_OBJECT_ID_INTERNAL_LVDS: diff --git a/drivers/gpu/drm/radeon/radeon_mode.h b/drivers/gpu/drm/radeon/radeon_mode.h index ba89b59f6e5..3b09a1f2d8f 100644 --- a/drivers/gpu/drm/radeon/radeon_mode.h +++ b/drivers/gpu/drm/radeon/radeon_mode.h @@ -36,6 +36,9 @@ #include #include #include +#include "radeon_fixed.h" + +struct radeon_device; #define to_radeon_crtc(x) container_of(x, struct radeon_crtc, base) #define to_radeon_connector(x) container_of(x, struct radeon_connector, base) @@ -171,6 +174,18 @@ struct radeon_mode_info { struct atom_context *atom_context; enum radeon_connector_table connector_table; bool mode_config_initialized; + struct radeon_crtc *crtcs[2]; +}; + +struct radeon_native_mode { + /* preferred mode */ + uint32_t panel_xres, panel_yres; + uint32_t hoverplus, hsync_width; + uint32_t hblank; + uint32_t voverplus, vsync_width; + uint32_t vblank; + uint32_t dotclock; + uint32_t flags; }; struct radeon_crtc { @@ -188,19 +203,11 @@ struct radeon_crtc { int cursor_height; uint32_t legacy_display_base_addr; uint32_t legacy_cursor_offset; -}; - -#define RADEON_USE_RMX 1 - -struct radeon_native_mode { - /* preferred mode */ - uint32_t panel_xres, panel_yres; - uint32_t hoverplus, hsync_width; - uint32_t hblank; - uint32_t voverplus, vsync_width; - uint32_t vblank; - uint32_t dotclock; - uint32_t flags; + enum radeon_rmx_type rmx_type; + uint32_t devices; + fixed20_12 vsc; + fixed20_12 hsc; + struct radeon_native_mode native_mode; }; struct radeon_encoder_primary_dac { @@ -386,16 +393,9 @@ void radeon_enc_destroy(struct drm_encoder *encoder); void radeon_copy_fb(struct drm_device *dev, struct drm_gem_object *dst_obj); void radeon_combios_asic_init(struct drm_device *dev); extern int radeon_static_clocks_init(struct drm_device *dev); -void radeon_init_disp_bw_legacy(struct drm_device *dev, - struct drm_display_mode *mode1, - uint32_t pixel_bytes1, - struct drm_display_mode *mode2, - uint32_t pixel_bytes2); -void radeon_init_disp_bw_avivo(struct drm_device *dev, - struct drm_display_mode *mode1, - uint32_t pixel_bytes1, - struct drm_display_mode *mode2, - uint32_t pixel_bytes2); -void radeon_init_disp_bandwidth(struct drm_device *dev); +bool radeon_crtc_scaling_mode_fixup(struct drm_crtc *crtc, + struct drm_display_mode *mode, + struct drm_display_mode *adjusted_mode); +void atom_rv515_force_tv_scaler(struct radeon_device *rdev); #endif diff --git a/drivers/gpu/drm/radeon/radeon_share.h b/drivers/gpu/drm/radeon/radeon_share.h new file mode 100644 index 00000000000..63a773578f1 --- /dev/null +++ b/drivers/gpu/drm/radeon/radeon_share.h @@ -0,0 +1,39 @@ +/* + * Copyright 2008 Advanced Micro Devices, Inc. + * Copyright 2008 Red Hat Inc. + * Copyright 2009 Jerome Glisse. + * + * Permission is hereby granted, free of charge, to any person obtaining a + * copy of this software and associated documentation files (the "Software"), + * to deal in the Software without restriction, including without limitation + * the rights to use, copy, modify, merge, publish, distribute, sublicense, + * and/or sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL + * THE COPYRIGHT HOLDER(S) OR AUTHOR(S) BE LIABLE FOR ANY CLAIM, DAMAGES OR + * OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, + * ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + * + * Authors: Dave Airlie + * Alex Deucher + * Jerome Glisse + */ +#ifndef __RADEON_SHARE_H__ +#define __RADEON_SHARE_H__ + +void r100_vram_init_sizes(struct radeon_device *rdev); + +void rs690_line_buffer_adjust(struct radeon_device *rdev, + struct drm_display_mode *mode1, + struct drm_display_mode *mode2); + +void rv515_bandwidth_avivo_update(struct radeon_device *rdev); + +#endif diff --git a/drivers/gpu/drm/radeon/rs400.c b/drivers/gpu/drm/radeon/rs400.c index daf24e85cba..96a3c8486d2 100644 --- a/drivers/gpu/drm/radeon/rs400.c +++ b/drivers/gpu/drm/radeon/rs400.c @@ -29,6 +29,7 @@ #include #include "radeon_reg.h" #include "radeon.h" +#include "radeon_share.h" /* rs400,rs480 depends on : */ void r100_hdp_reset(struct radeon_device *rdev); diff --git a/drivers/gpu/drm/radeon/rs600.c b/drivers/gpu/drm/radeon/rs600.c index ab0c967553e..bccdce7fd37 100644 --- a/drivers/gpu/drm/radeon/rs600.c +++ b/drivers/gpu/drm/radeon/rs600.c @@ -301,6 +301,11 @@ void rs600_vram_info(struct radeon_device *rdev) rdev->mc.vram_width = 128; } +void rs600_bandwidth_update(struct radeon_device *rdev) +{ + /* FIXME: implement, should this be like rs690 ? */ +} + /* * Indirect registers accessor diff --git a/drivers/gpu/drm/radeon/rs690.c b/drivers/gpu/drm/radeon/rs690.c index 79ba85042b5..97eaee3d28b 100644 --- a/drivers/gpu/drm/radeon/rs690.c +++ b/drivers/gpu/drm/radeon/rs690.c @@ -28,6 +28,9 @@ #include "drmP.h" #include "radeon_reg.h" #include "radeon.h" +#include "rs690r.h" +#include "atom.h" +#include "atom-bits.h" /* rs690,rs740 depends on : */ void r100_hdp_reset(struct radeon_device *rdev); @@ -138,9 +141,82 @@ void rs690_gpu_init(struct radeon_device *rdev) /* * VRAM info. */ +void rs690_pm_info(struct radeon_device *rdev) +{ + int index = GetIndexIntoMasterTable(DATA, IntegratedSystemInfo); + struct _ATOM_INTEGRATED_SYSTEM_INFO *info; + struct _ATOM_INTEGRATED_SYSTEM_INFO_V2 *info_v2; + void *ptr; + uint16_t data_offset; + uint8_t frev, crev; + fixed20_12 tmp; + + atom_parse_data_header(rdev->mode_info.atom_context, index, NULL, + &frev, &crev, &data_offset); + ptr = rdev->mode_info.atom_context->bios + data_offset; + info = (struct _ATOM_INTEGRATED_SYSTEM_INFO *)ptr; + info_v2 = (struct _ATOM_INTEGRATED_SYSTEM_INFO_V2 *)ptr; + /* Get various system informations from bios */ + switch (crev) { + case 1: + tmp.full = rfixed_const(100); + rdev->pm.igp_sideport_mclk.full = rfixed_const(info->ulBootUpMemoryClock); + rdev->pm.igp_sideport_mclk.full = rfixed_div(rdev->pm.igp_sideport_mclk, tmp); + rdev->pm.igp_system_mclk.full = rfixed_const(le16_to_cpu(info->usK8MemoryClock)); + rdev->pm.igp_ht_link_clk.full = rfixed_const(le16_to_cpu(info->usFSBClock)); + rdev->pm.igp_ht_link_width.full = rfixed_const(info->ucHTLinkWidth); + break; + case 2: + tmp.full = rfixed_const(100); + rdev->pm.igp_sideport_mclk.full = rfixed_const(info_v2->ulBootUpSidePortClock); + rdev->pm.igp_sideport_mclk.full = rfixed_div(rdev->pm.igp_sideport_mclk, tmp); + rdev->pm.igp_system_mclk.full = rfixed_const(info_v2->ulBootUpUMAClock); + rdev->pm.igp_system_mclk.full = rfixed_div(rdev->pm.igp_system_mclk, tmp); + rdev->pm.igp_ht_link_clk.full = rfixed_const(info_v2->ulHTLinkFreq); + rdev->pm.igp_ht_link_clk.full = rfixed_div(rdev->pm.igp_ht_link_clk, tmp); + rdev->pm.igp_ht_link_width.full = rfixed_const(le16_to_cpu(info_v2->usMinHTLinkWidth)); + break; + default: + tmp.full = rfixed_const(100); + /* We assume the slower possible clock ie worst case */ + /* DDR 333Mhz */ + rdev->pm.igp_sideport_mclk.full = rfixed_const(333); + /* FIXME: system clock ? */ + rdev->pm.igp_system_mclk.full = rfixed_const(100); + rdev->pm.igp_system_mclk.full = rfixed_div(rdev->pm.igp_system_mclk, tmp); + rdev->pm.igp_ht_link_clk.full = rfixed_const(200); + rdev->pm.igp_ht_link_width.full = rfixed_const(8); + DRM_ERROR("No integrated system info for your GPU, using safe default\n"); + break; + } + /* Compute various bandwidth */ + /* k8_bandwidth = (memory_clk / 2) * 2 * 8 * 0.5 = memory_clk * 4 */ + tmp.full = rfixed_const(4); + rdev->pm.k8_bandwidth.full = rfixed_mul(rdev->pm.igp_system_mclk, tmp); + /* ht_bandwidth = ht_clk * 2 * ht_width / 8 * 0.8 + * = ht_clk * ht_width / 5 + */ + tmp.full = rfixed_const(5); + rdev->pm.ht_bandwidth.full = rfixed_mul(rdev->pm.igp_ht_link_clk, + rdev->pm.igp_ht_link_width); + rdev->pm.ht_bandwidth.full = rfixed_div(rdev->pm.ht_bandwidth, tmp); + if (tmp.full < rdev->pm.max_bandwidth.full) { + /* HT link is a limiting factor */ + rdev->pm.max_bandwidth.full = tmp.full; + } + /* sideport_bandwidth = (sideport_clk / 2) * 2 * 2 * 0.7 + * = (sideport_clk * 14) / 10 + */ + tmp.full = rfixed_const(14); + rdev->pm.sideport_bandwidth.full = rfixed_mul(rdev->pm.igp_sideport_mclk, tmp); + tmp.full = rfixed_const(10); + rdev->pm.sideport_bandwidth.full = rfixed_div(rdev->pm.sideport_bandwidth, tmp); +} + void rs690_vram_info(struct radeon_device *rdev) { uint32_t tmp; + fixed20_12 a; rs400_gart_adjust_size(rdev); /* DDR for all card after R300 & IGP */ @@ -156,8 +232,404 @@ void rs690_vram_info(struct radeon_device *rdev) rdev->mc.aper_base = drm_get_resource_start(rdev->ddev, 0); rdev->mc.aper_size = drm_get_resource_len(rdev->ddev, 0); + rs690_pm_info(rdev); + /* FIXME: we should enforce default clock in case GPU is not in + * default setup + */ + a.full = rfixed_const(100); + rdev->pm.sclk.full = rfixed_const(rdev->clock.default_sclk); + rdev->pm.sclk.full = rfixed_div(rdev->pm.sclk, a); + a.full = rfixed_const(16); + /* core_bandwidth = sclk(Mhz) * 16 */ + rdev->pm.core_bandwidth.full = rfixed_div(rdev->pm.sclk, a); +} + +void rs690_line_buffer_adjust(struct radeon_device *rdev, + struct drm_display_mode *mode1, + struct drm_display_mode *mode2) +{ + u32 tmp; + + /* + * Line Buffer Setup + * There is a single line buffer shared by both display controllers. + * DC_LB_MEMORY_SPLIT controls how that line buffer is shared between + * the display controllers. The paritioning can either be done + * manually or via one of four preset allocations specified in bits 1:0: + * 0 - line buffer is divided in half and shared between crtc + * 1 - D1 gets 3/4 of the line buffer, D2 gets 1/4 + * 2 - D1 gets the whole buffer + * 3 - D1 gets 1/4 of the line buffer, D2 gets 3/4 + * Setting bit 2 of DC_LB_MEMORY_SPLIT controls switches to manual + * allocation mode. In manual allocation mode, D1 always starts at 0, + * D1 end/2 is specified in bits 14:4; D2 allocation follows D1. + */ + tmp = RREG32(DC_LB_MEMORY_SPLIT) & ~DC_LB_MEMORY_SPLIT_MASK; + tmp &= ~DC_LB_MEMORY_SPLIT_SHIFT_MODE; + /* auto */ + if (mode1 && mode2) { + if (mode1->hdisplay > mode2->hdisplay) { + if (mode1->hdisplay > 2560) + tmp |= DC_LB_MEMORY_SPLIT_D1_3Q_D2_1Q; + else + tmp |= DC_LB_MEMORY_SPLIT_D1HALF_D2HALF; + } else if (mode2->hdisplay > mode1->hdisplay) { + if (mode2->hdisplay > 2560) + tmp |= DC_LB_MEMORY_SPLIT_D1_1Q_D2_3Q; + else + tmp |= DC_LB_MEMORY_SPLIT_D1HALF_D2HALF; + } else + tmp |= AVIVO_DC_LB_MEMORY_SPLIT_D1HALF_D2HALF; + } else if (mode1) { + tmp |= DC_LB_MEMORY_SPLIT_D1_ONLY; + } else if (mode2) { + tmp |= DC_LB_MEMORY_SPLIT_D1_1Q_D2_3Q; + } + WREG32(DC_LB_MEMORY_SPLIT, tmp); } +struct rs690_watermark { + u32 lb_request_fifo_depth; + fixed20_12 num_line_pair; + fixed20_12 estimated_width; + fixed20_12 worst_case_latency; + fixed20_12 consumption_rate; + fixed20_12 active_time; + fixed20_12 dbpp; + fixed20_12 priority_mark_max; + fixed20_12 priority_mark; + fixed20_12 sclk; +}; + +void rs690_crtc_bandwidth_compute(struct radeon_device *rdev, + struct radeon_crtc *crtc, + struct rs690_watermark *wm) +{ + struct drm_display_mode *mode = &crtc->base.mode; + fixed20_12 a, b, c; + fixed20_12 pclk, request_fifo_depth, tolerable_latency, estimated_width; + fixed20_12 consumption_time, line_time, chunk_time, read_delay_latency; + /* FIXME: detect IGP with sideport memory, i don't think there is any + * such product available + */ + bool sideport = false; + + if (!crtc->base.enabled) { + /* FIXME: wouldn't it better to set priority mark to maximum */ + wm->lb_request_fifo_depth = 4; + return; + } + + if (crtc->vsc.full > rfixed_const(2)) + wm->num_line_pair.full = rfixed_const(2); + else + wm->num_line_pair.full = rfixed_const(1); + + b.full = rfixed_const(mode->crtc_hdisplay); + c.full = rfixed_const(256); + a.full = rfixed_mul(wm->num_line_pair, b); + request_fifo_depth.full = rfixed_div(a, c); + if (a.full < rfixed_const(4)) { + wm->lb_request_fifo_depth = 4; + } else { + wm->lb_request_fifo_depth = rfixed_trunc(request_fifo_depth); + } + + /* Determine consumption rate + * pclk = pixel clock period(ns) = 1000 / (mode.clock / 1000) + * vtaps = number of vertical taps, + * vsc = vertical scaling ratio, defined as source/destination + * hsc = horizontal scaling ration, defined as source/destination + */ + a.full = rfixed_const(mode->clock); + b.full = rfixed_const(1000); + a.full = rfixed_div(a, b); + pclk.full = rfixed_div(b, a); + if (crtc->rmx_type != RMX_OFF) { + b.full = rfixed_const(2); + if (crtc->vsc.full > b.full) + b.full = crtc->vsc.full; + b.full = rfixed_mul(b, crtc->hsc); + c.full = rfixed_const(2); + b.full = rfixed_div(b, c); + consumption_time.full = rfixed_div(pclk, b); + } else { + consumption_time.full = pclk.full; + } + a.full = rfixed_const(1); + wm->consumption_rate.full = rfixed_div(a, consumption_time); + + + /* Determine line time + * LineTime = total time for one line of displayhtotal + * LineTime = total number of horizontal pixels + * pclk = pixel clock period(ns) + */ + a.full = rfixed_const(crtc->base.mode.crtc_htotal); + line_time.full = rfixed_mul(a, pclk); + + /* Determine active time + * ActiveTime = time of active region of display within one line, + * hactive = total number of horizontal active pixels + * htotal = total number of horizontal pixels + */ + a.full = rfixed_const(crtc->base.mode.crtc_htotal); + b.full = rfixed_const(crtc->base.mode.crtc_hdisplay); + wm->active_time.full = rfixed_mul(line_time, b); + wm->active_time.full = rfixed_div(wm->active_time, a); + + /* Maximun bandwidth is the minimun bandwidth of all component */ + rdev->pm.max_bandwidth = rdev->pm.core_bandwidth; + if (sideport) { + if (rdev->pm.max_bandwidth.full > rdev->pm.sideport_bandwidth.full && + rdev->pm.sideport_bandwidth.full) + rdev->pm.max_bandwidth = rdev->pm.sideport_bandwidth; + read_delay_latency.full = rfixed_const(370 * 800 * 1000); + read_delay_latency.full = rfixed_div(read_delay_latency, + rdev->pm.igp_sideport_mclk); + } else { + if (rdev->pm.max_bandwidth.full > rdev->pm.k8_bandwidth.full && + rdev->pm.k8_bandwidth.full) + rdev->pm.max_bandwidth = rdev->pm.k8_bandwidth; + if (rdev->pm.max_bandwidth.full > rdev->pm.ht_bandwidth.full && + rdev->pm.ht_bandwidth.full) + rdev->pm.max_bandwidth = rdev->pm.ht_bandwidth; + read_delay_latency.full = rfixed_const(5000); + } + + /* sclk = system clocks(ns) = 1000 / max_bandwidth / 16 */ + a.full = rfixed_const(16); + rdev->pm.sclk.full = rfixed_mul(rdev->pm.max_bandwidth, a); + a.full = rfixed_const(1000); + rdev->pm.sclk.full = rfixed_div(a, rdev->pm.sclk); + /* Determine chunk time + * ChunkTime = the time it takes the DCP to send one chunk of data + * to the LB which consists of pipeline delay and inter chunk gap + * sclk = system clock(ns) + */ + a.full = rfixed_const(256 * 13); + chunk_time.full = rfixed_mul(rdev->pm.sclk, a); + a.full = rfixed_const(10); + chunk_time.full = rfixed_div(chunk_time, a); + + /* Determine the worst case latency + * NumLinePair = Number of line pairs to request(1=2 lines, 2=4 lines) + * WorstCaseLatency = worst case time from urgent to when the MC starts + * to return data + * READ_DELAY_IDLE_MAX = constant of 1us + * ChunkTime = time it takes the DCP to send one chunk of data to the LB + * which consists of pipeline delay and inter chunk gap + */ + if (rfixed_trunc(wm->num_line_pair) > 1) { + a.full = rfixed_const(3); + wm->worst_case_latency.full = rfixed_mul(a, chunk_time); + wm->worst_case_latency.full += read_delay_latency.full; + } else { + a.full = rfixed_const(2); + wm->worst_case_latency.full = rfixed_mul(a, chunk_time); + wm->worst_case_latency.full += read_delay_latency.full; + } + + /* Determine the tolerable latency + * TolerableLatency = Any given request has only 1 line time + * for the data to be returned + * LBRequestFifoDepth = Number of chunk requests the LB can + * put into the request FIFO for a display + * LineTime = total time for one line of display + * ChunkTime = the time it takes the DCP to send one chunk + * of data to the LB which consists of + * pipeline delay and inter chunk gap + */ + if ((2+wm->lb_request_fifo_depth) >= rfixed_trunc(request_fifo_depth)) { + tolerable_latency.full = line_time.full; + } else { + tolerable_latency.full = rfixed_const(wm->lb_request_fifo_depth - 2); + tolerable_latency.full = request_fifo_depth.full - tolerable_latency.full; + tolerable_latency.full = rfixed_mul(tolerable_latency, chunk_time); + tolerable_latency.full = line_time.full - tolerable_latency.full; + } + /* We assume worst case 32bits (4 bytes) */ + wm->dbpp.full = rfixed_const(4 * 8); + + /* Determine the maximum priority mark + * width = viewport width in pixels + */ + a.full = rfixed_const(16); + wm->priority_mark_max.full = rfixed_const(crtc->base.mode.crtc_hdisplay); + wm->priority_mark_max.full = rfixed_div(wm->priority_mark_max, a); + + /* Determine estimated width */ + estimated_width.full = tolerable_latency.full - wm->worst_case_latency.full; + estimated_width.full = rfixed_div(estimated_width, consumption_time); + if (rfixed_trunc(estimated_width) > crtc->base.mode.crtc_hdisplay) { + wm->priority_mark.full = rfixed_const(10); + } else { + a.full = rfixed_const(16); + wm->priority_mark.full = rfixed_div(estimated_width, a); + wm->priority_mark.full = wm->priority_mark_max.full - wm->priority_mark.full; + } +} + +void rs690_bandwidth_update(struct radeon_device *rdev) +{ + struct drm_display_mode *mode0 = NULL; + struct drm_display_mode *mode1 = NULL; + struct rs690_watermark wm0; + struct rs690_watermark wm1; + u32 tmp; + fixed20_12 priority_mark02, priority_mark12, fill_rate; + fixed20_12 a, b; + + if (rdev->mode_info.crtcs[0]->base.enabled) + mode0 = &rdev->mode_info.crtcs[0]->base.mode; + if (rdev->mode_info.crtcs[1]->base.enabled) + mode1 = &rdev->mode_info.crtcs[1]->base.mode; + /* + * Set display0/1 priority up in the memory controller for + * modes if the user specifies HIGH for displaypriority + * option. + */ + if (rdev->disp_priority == 2) { + tmp = RREG32_MC(MC_INIT_MISC_LAT_TIMER); + tmp &= ~MC_DISP1R_INIT_LAT_MASK; + tmp &= ~MC_DISP0R_INIT_LAT_MASK; + if (mode1) + tmp |= (1 << MC_DISP1R_INIT_LAT_SHIFT); + if (mode0) + tmp |= (1 << MC_DISP0R_INIT_LAT_SHIFT); + WREG32_MC(MC_INIT_MISC_LAT_TIMER, tmp); + } + rs690_line_buffer_adjust(rdev, mode0, mode1); + + if ((rdev->family == CHIP_RS690) || (rdev->family == CHIP_RS740)) + WREG32(DCP_CONTROL, 0); + if ((rdev->family == CHIP_RS780) || (rdev->family == CHIP_RS880)) + WREG32(DCP_CONTROL, 2); + + rs690_crtc_bandwidth_compute(rdev, rdev->mode_info.crtcs[0], &wm0); + rs690_crtc_bandwidth_compute(rdev, rdev->mode_info.crtcs[1], &wm1); + + tmp = (wm0.lb_request_fifo_depth - 1); + tmp |= (wm1.lb_request_fifo_depth - 1) << 16; + WREG32(LB_MAX_REQ_OUTSTANDING, tmp); + + if (mode0 && mode1) { + if (rfixed_trunc(wm0.dbpp) > 64) + a.full = rfixed_mul(wm0.dbpp, wm0.num_line_pair); + else + a.full = wm0.num_line_pair.full; + if (rfixed_trunc(wm1.dbpp) > 64) + b.full = rfixed_mul(wm1.dbpp, wm1.num_line_pair); + else + b.full = wm1.num_line_pair.full; + a.full += b.full; + fill_rate.full = rfixed_div(wm0.sclk, a); + if (wm0.consumption_rate.full > fill_rate.full) { + b.full = wm0.consumption_rate.full - fill_rate.full; + b.full = rfixed_mul(b, wm0.active_time); + a.full = rfixed_mul(wm0.worst_case_latency, + wm0.consumption_rate); + a.full = a.full + b.full; + b.full = rfixed_const(16 * 1000); + priority_mark02.full = rfixed_div(a, b); + } else { + a.full = rfixed_mul(wm0.worst_case_latency, + wm0.consumption_rate); + b.full = rfixed_const(16 * 1000); + priority_mark02.full = rfixed_div(a, b); + } + if (wm1.consumption_rate.full > fill_rate.full) { + b.full = wm1.consumption_rate.full - fill_rate.full; + b.full = rfixed_mul(b, wm1.active_time); + a.full = rfixed_mul(wm1.worst_case_latency, + wm1.consumption_rate); + a.full = a.full + b.full; + b.full = rfixed_const(16 * 1000); + priority_mark12.full = rfixed_div(a, b); + } else { + a.full = rfixed_mul(wm1.worst_case_latency, + wm1.consumption_rate); + b.full = rfixed_const(16 * 1000); + priority_mark12.full = rfixed_div(a, b); + } + if (wm0.priority_mark.full > priority_mark02.full) + priority_mark02.full = wm0.priority_mark.full; + if (rfixed_trunc(priority_mark02) < 0) + priority_mark02.full = 0; + if (wm0.priority_mark_max.full > priority_mark02.full) + priority_mark02.full = wm0.priority_mark_max.full; + if (wm1.priority_mark.full > priority_mark12.full) + priority_mark12.full = wm1.priority_mark.full; + if (rfixed_trunc(priority_mark12) < 0) + priority_mark12.full = 0; + if (wm1.priority_mark_max.full > priority_mark12.full) + priority_mark12.full = wm1.priority_mark_max.full; + WREG32(D1MODE_PRIORITY_A_CNT, rfixed_trunc(priority_mark02)); + WREG32(D1MODE_PRIORITY_B_CNT, rfixed_trunc(priority_mark02)); + WREG32(D2MODE_PRIORITY_A_CNT, rfixed_trunc(priority_mark12)); + WREG32(D2MODE_PRIORITY_B_CNT, rfixed_trunc(priority_mark12)); + } else if (mode0) { + if (rfixed_trunc(wm0.dbpp) > 64) + a.full = rfixed_mul(wm0.dbpp, wm0.num_line_pair); + else + a.full = wm0.num_line_pair.full; + fill_rate.full = rfixed_div(wm0.sclk, a); + if (wm0.consumption_rate.full > fill_rate.full) { + b.full = wm0.consumption_rate.full - fill_rate.full; + b.full = rfixed_mul(b, wm0.active_time); + a.full = rfixed_mul(wm0.worst_case_latency, + wm0.consumption_rate); + a.full = a.full + b.full; + b.full = rfixed_const(16 * 1000); + priority_mark02.full = rfixed_div(a, b); + } else { + a.full = rfixed_mul(wm0.worst_case_latency, + wm0.consumption_rate); + b.full = rfixed_const(16 * 1000); + priority_mark02.full = rfixed_div(a, b); + } + if (wm0.priority_mark.full > priority_mark02.full) + priority_mark02.full = wm0.priority_mark.full; + if (rfixed_trunc(priority_mark02) < 0) + priority_mark02.full = 0; + if (wm0.priority_mark_max.full > priority_mark02.full) + priority_mark02.full = wm0.priority_mark_max.full; + WREG32(D1MODE_PRIORITY_A_CNT, rfixed_trunc(priority_mark02)); + WREG32(D1MODE_PRIORITY_B_CNT, rfixed_trunc(priority_mark02)); + WREG32(D2MODE_PRIORITY_A_CNT, MODE_PRIORITY_OFF); + WREG32(D2MODE_PRIORITY_B_CNT, MODE_PRIORITY_OFF); + } else { + if (rfixed_trunc(wm1.dbpp) > 64) + a.full = rfixed_mul(wm1.dbpp, wm1.num_line_pair); + else + a.full = wm1.num_line_pair.full; + fill_rate.full = rfixed_div(wm1.sclk, a); + if (wm1.consumption_rate.full > fill_rate.full) { + b.full = wm1.consumption_rate.full - fill_rate.full; + b.full = rfixed_mul(b, wm1.active_time); + a.full = rfixed_mul(wm1.worst_case_latency, + wm1.consumption_rate); + a.full = a.full + b.full; + b.full = rfixed_const(16 * 1000); + priority_mark12.full = rfixed_div(a, b); + } else { + a.full = rfixed_mul(wm1.worst_case_latency, + wm1.consumption_rate); + b.full = rfixed_const(16 * 1000); + priority_mark12.full = rfixed_div(a, b); + } + if (wm1.priority_mark.full > priority_mark12.full) + priority_mark12.full = wm1.priority_mark.full; + if (rfixed_trunc(priority_mark12) < 0) + priority_mark12.full = 0; + if (wm1.priority_mark_max.full > priority_mark12.full) + priority_mark12.full = wm1.priority_mark_max.full; + WREG32(D1MODE_PRIORITY_A_CNT, MODE_PRIORITY_OFF); + WREG32(D1MODE_PRIORITY_B_CNT, MODE_PRIORITY_OFF); + WREG32(D2MODE_PRIORITY_A_CNT, rfixed_trunc(priority_mark12)); + WREG32(D2MODE_PRIORITY_B_CNT, rfixed_trunc(priority_mark12)); + } +} /* * Indirect registers accessor diff --git a/drivers/gpu/drm/radeon/rs690r.h b/drivers/gpu/drm/radeon/rs690r.h new file mode 100644 index 00000000000..c0d9faa2175 --- /dev/null +++ b/drivers/gpu/drm/radeon/rs690r.h @@ -0,0 +1,99 @@ +/* + * Copyright 2008 Advanced Micro Devices, Inc. + * Copyright 2008 Red Hat Inc. + * Copyright 2009 Jerome Glisse. + * + * Permission is hereby granted, free of charge, to any person obtaining a + * copy of this software and associated documentation files (the "Software"), + * to deal in the Software without restriction, including without limitation + * the rights to use, copy, modify, merge, publish, distribute, sublicense, + * and/or sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL + * THE COPYRIGHT HOLDER(S) OR AUTHOR(S) BE LIABLE FOR ANY CLAIM, DAMAGES OR + * OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, + * ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + * + * Authors: Dave Airlie + * Alex Deucher + * Jerome Glisse + */ +#ifndef RS690R_H +#define RS690R_H + +/* RS690/RS740 registers */ +#define MC_INDEX 0x0078 +# define MC_INDEX_MASK 0x1FF +# define MC_INDEX_WR_EN (1 << 9) +# define MC_INDEX_WR_ACK 0x7F +#define MC_DATA 0x007C +#define HDP_FB_LOCATION 0x0134 +#define DC_LB_MEMORY_SPLIT 0x6520 +#define DC_LB_MEMORY_SPLIT_MASK 0x00000003 +#define DC_LB_MEMORY_SPLIT_SHIFT 0 +#define DC_LB_MEMORY_SPLIT_D1HALF_D2HALF 0 +#define DC_LB_MEMORY_SPLIT_D1_3Q_D2_1Q 1 +#define DC_LB_MEMORY_SPLIT_D1_ONLY 2 +#define DC_LB_MEMORY_SPLIT_D1_1Q_D2_3Q 3 +#define DC_LB_MEMORY_SPLIT_SHIFT_MODE (1 << 2) +#define DC_LB_DISP1_END_ADR_SHIFT 4 +#define DC_LB_DISP1_END_ADR_MASK 0x00007FF0 +#define D1MODE_PRIORITY_A_CNT 0x6548 +#define MODE_PRIORITY_MARK_MASK 0x00007FFF +#define MODE_PRIORITY_OFF (1 << 16) +#define MODE_PRIORITY_ALWAYS_ON (1 << 20) +#define MODE_PRIORITY_FORCE_MASK (1 << 24) +#define D1MODE_PRIORITY_B_CNT 0x654C +#define LB_MAX_REQ_OUTSTANDING 0x6D58 +#define LB_D1_MAX_REQ_OUTSTANDING_MASK 0x0000000F +#define LB_D1_MAX_REQ_OUTSTANDING_SHIFT 0 +#define LB_D2_MAX_REQ_OUTSTANDING_MASK 0x000F0000 +#define LB_D2_MAX_REQ_OUTSTANDING_SHIFT 16 +#define DCP_CONTROL 0x6C9C +#define D2MODE_PRIORITY_A_CNT 0x6D48 +#define D2MODE_PRIORITY_B_CNT 0x6D4C + +/* MC indirect registers */ +#define MC_STATUS_IDLE (1 << 0) +#define MC_MISC_CNTL 0x18 +#define DISABLE_GTW (1 << 1) +#define GART_INDEX_REG_EN (1 << 12) +#define BLOCK_GFX_D3_EN (1 << 14) +#define GART_FEATURE_ID 0x2B +#define HANG_EN (1 << 11) +#define TLB_ENABLE (1 << 18) +#define P2P_ENABLE (1 << 19) +#define GTW_LAC_EN (1 << 25) +#define LEVEL2_GART (0 << 30) +#define LEVEL1_GART (1 << 30) +#define PDC_EN (1 << 31) +#define GART_BASE 0x2C +#define GART_CACHE_CNTRL 0x2E +# define GART_CACHE_INVALIDATE (1 << 0) +#define MC_STATUS 0x90 +#define MCCFG_FB_LOCATION 0x100 +#define MC_FB_START_MASK 0x0000FFFF +#define MC_FB_START_SHIFT 0 +#define MC_FB_TOP_MASK 0xFFFF0000 +#define MC_FB_TOP_SHIFT 16 +#define MCCFG_AGP_LOCATION 0x101 +#define MC_AGP_START_MASK 0x0000FFFF +#define MC_AGP_START_SHIFT 0 +#define MC_AGP_TOP_MASK 0xFFFF0000 +#define MC_AGP_TOP_SHIFT 16 +#define MCCFG_AGP_BASE 0x102 +#define MCCFG_AGP_BASE_2 0x103 +#define MC_INIT_MISC_LAT_TIMER 0x104 +#define MC_DISP0R_INIT_LAT_SHIFT 8 +#define MC_DISP0R_INIT_LAT_MASK 0x00000F00 +#define MC_DISP1R_INIT_LAT_SHIFT 12 +#define MC_DISP1R_INIT_LAT_MASK 0x0000F000 + +#endif diff --git a/drivers/gpu/drm/radeon/rv515.c b/drivers/gpu/drm/radeon/rv515.c index 677929ed8ed..4fd411893b9 100644 --- a/drivers/gpu/drm/radeon/rv515.c +++ b/drivers/gpu/drm/radeon/rv515.c @@ -27,8 +27,9 @@ */ #include #include "drmP.h" -#include "radeon_reg.h" +#include "rv515r.h" #include "radeon.h" +#include "radeon_share.h" /* rv515 depends on : */ void r100_hdp_reset(struct radeon_device *rdev); @@ -100,25 +101,25 @@ int rv515_mc_init(struct radeon_device *rdev) } /* Write VRAM size in case we are limiting it */ WREG32(RADEON_CONFIG_MEMSIZE, rdev->mc.vram_size); - tmp = REG_SET(RV515_MC_FB_START, rdev->mc.vram_location >> 16); + tmp = REG_SET(MC_FB_START, rdev->mc.vram_location >> 16); WREG32(0x134, tmp); tmp = rdev->mc.vram_location + rdev->mc.vram_size - 1; - tmp = REG_SET(RV515_MC_FB_TOP, tmp >> 16); - tmp |= REG_SET(RV515_MC_FB_START, rdev->mc.vram_location >> 16); - WREG32_MC(RV515_MC_FB_LOCATION, tmp); - WREG32(RS690_HDP_FB_LOCATION, rdev->mc.vram_location >> 16); + tmp = REG_SET(MC_FB_TOP, tmp >> 16); + tmp |= REG_SET(MC_FB_START, rdev->mc.vram_location >> 16); + WREG32_MC(MC_FB_LOCATION, tmp); + WREG32(HDP_FB_LOCATION, rdev->mc.vram_location >> 16); WREG32(0x310, rdev->mc.vram_location); if (rdev->flags & RADEON_IS_AGP) { tmp = rdev->mc.gtt_location + rdev->mc.gtt_size - 1; - tmp = REG_SET(RV515_MC_AGP_TOP, tmp >> 16); - tmp |= REG_SET(RV515_MC_AGP_START, rdev->mc.gtt_location >> 16); - WREG32_MC(RV515_MC_AGP_LOCATION, tmp); - WREG32_MC(RV515_MC_AGP_BASE, rdev->mc.agp_base); - WREG32_MC(RV515_MC_AGP_BASE_2, 0); + tmp = REG_SET(MC_AGP_TOP, tmp >> 16); + tmp |= REG_SET(MC_AGP_START, rdev->mc.gtt_location >> 16); + WREG32_MC(MC_AGP_LOCATION, tmp); + WREG32_MC(MC_AGP_BASE, rdev->mc.agp_base); + WREG32_MC(MC_AGP_BASE_2, 0); } else { - WREG32_MC(RV515_MC_AGP_LOCATION, 0x0FFFFFFF); - WREG32_MC(RV515_MC_AGP_BASE, 0); - WREG32_MC(RV515_MC_AGP_BASE_2, 0); + WREG32_MC(MC_AGP_LOCATION, 0x0FFFFFFF); + WREG32_MC(MC_AGP_BASE, 0); + WREG32_MC(MC_AGP_BASE_2, 0); } return 0; } @@ -136,95 +137,67 @@ void rv515_mc_fini(struct radeon_device *rdev) */ void rv515_ring_start(struct radeon_device *rdev) { - unsigned gb_tile_config; int r; - /* Sub pixel 1/12 so we can have 4K rendering according to doc */ - gb_tile_config = R300_ENABLE_TILING | R300_TILE_SIZE_16; - switch (rdev->num_gb_pipes) { - case 2: - gb_tile_config |= R300_PIPE_COUNT_R300; - break; - case 3: - gb_tile_config |= R300_PIPE_COUNT_R420_3P; - break; - case 4: - gb_tile_config |= R300_PIPE_COUNT_R420; - break; - case 1: - default: - gb_tile_config |= R300_PIPE_COUNT_RV350; - break; - } - r = radeon_ring_lock(rdev, 64); if (r) { return; } - radeon_ring_write(rdev, PACKET0(RADEON_ISYNC_CNTL, 0)); - radeon_ring_write(rdev, - RADEON_ISYNC_ANY2D_IDLE3D | - RADEON_ISYNC_ANY3D_IDLE2D | - RADEON_ISYNC_WAIT_IDLEGUI | - RADEON_ISYNC_CPSCRATCH_IDLEGUI); - radeon_ring_write(rdev, PACKET0(R300_GB_TILE_CONFIG, 0)); - radeon_ring_write(rdev, gb_tile_config); - radeon_ring_write(rdev, PACKET0(RADEON_WAIT_UNTIL, 0)); + radeon_ring_write(rdev, PACKET0(ISYNC_CNTL, 0)); radeon_ring_write(rdev, - RADEON_WAIT_2D_IDLECLEAN | - RADEON_WAIT_3D_IDLECLEAN); + ISYNC_ANY2D_IDLE3D | + ISYNC_ANY3D_IDLE2D | + ISYNC_WAIT_IDLEGUI | + ISYNC_CPSCRATCH_IDLEGUI); + radeon_ring_write(rdev, PACKET0(WAIT_UNTIL, 0)); + radeon_ring_write(rdev, WAIT_2D_IDLECLEAN | WAIT_3D_IDLECLEAN); radeon_ring_write(rdev, PACKET0(0x170C, 0)); radeon_ring_write(rdev, 1 << 31); - radeon_ring_write(rdev, PACKET0(R300_GB_SELECT, 0)); + radeon_ring_write(rdev, PACKET0(GB_SELECT, 0)); radeon_ring_write(rdev, 0); - radeon_ring_write(rdev, PACKET0(R300_GB_ENABLE, 0)); + radeon_ring_write(rdev, PACKET0(GB_ENABLE, 0)); radeon_ring_write(rdev, 0); radeon_ring_write(rdev, PACKET0(0x42C8, 0)); radeon_ring_write(rdev, (1 << rdev->num_gb_pipes) - 1); - radeon_ring_write(rdev, PACKET0(R500_VAP_INDEX_OFFSET, 0)); + radeon_ring_write(rdev, PACKET0(VAP_INDEX_OFFSET, 0)); radeon_ring_write(rdev, 0); - radeon_ring_write(rdev, PACKET0(R300_RB3D_DSTCACHE_CTLSTAT, 0)); - radeon_ring_write(rdev, R300_RB3D_DC_FLUSH | R300_RB3D_DC_FREE); - radeon_ring_write(rdev, PACKET0(R300_RB3D_ZCACHE_CTLSTAT, 0)); - radeon_ring_write(rdev, R300_ZC_FLUSH | R300_ZC_FREE); - radeon_ring_write(rdev, PACKET0(RADEON_WAIT_UNTIL, 0)); - radeon_ring_write(rdev, - RADEON_WAIT_2D_IDLECLEAN | - RADEON_WAIT_3D_IDLECLEAN); - radeon_ring_write(rdev, PACKET0(R300_GB_AA_CONFIG, 0)); + radeon_ring_write(rdev, PACKET0(RB3D_DSTCACHE_CTLSTAT, 0)); + radeon_ring_write(rdev, RB3D_DC_FLUSH | RB3D_DC_FREE); + radeon_ring_write(rdev, PACKET0(ZB_ZCACHE_CTLSTAT, 0)); + radeon_ring_write(rdev, ZC_FLUSH | ZC_FREE); + radeon_ring_write(rdev, PACKET0(WAIT_UNTIL, 0)); + radeon_ring_write(rdev, WAIT_2D_IDLECLEAN | WAIT_3D_IDLECLEAN); + radeon_ring_write(rdev, PACKET0(GB_AA_CONFIG, 0)); radeon_ring_write(rdev, 0); - radeon_ring_write(rdev, PACKET0(R300_RB3D_DSTCACHE_CTLSTAT, 0)); - radeon_ring_write(rdev, R300_RB3D_DC_FLUSH | R300_RB3D_DC_FREE); - radeon_ring_write(rdev, PACKET0(R300_RB3D_ZCACHE_CTLSTAT, 0)); - radeon_ring_write(rdev, R300_ZC_FLUSH | R300_ZC_FREE); - radeon_ring_write(rdev, PACKET0(R300_GB_MSPOS0, 0)); - radeon_ring_write(rdev, - ((6 << R300_MS_X0_SHIFT) | - (6 << R300_MS_Y0_SHIFT) | - (6 << R300_MS_X1_SHIFT) | - (6 << R300_MS_Y1_SHIFT) | - (6 << R300_MS_X2_SHIFT) | - (6 << R300_MS_Y2_SHIFT) | - (6 << R300_MSBD0_Y_SHIFT) | - (6 << R300_MSBD0_X_SHIFT))); - radeon_ring_write(rdev, PACKET0(R300_GB_MSPOS1, 0)); - radeon_ring_write(rdev, - ((6 << R300_MS_X3_SHIFT) | - (6 << R300_MS_Y3_SHIFT) | - (6 << R300_MS_X4_SHIFT) | - (6 << R300_MS_Y4_SHIFT) | - (6 << R300_MS_X5_SHIFT) | - (6 << R300_MS_Y5_SHIFT) | - (6 << R300_MSBD1_SHIFT))); - radeon_ring_write(rdev, PACKET0(R300_GA_ENHANCE, 0)); - radeon_ring_write(rdev, R300_GA_DEADLOCK_CNTL | R300_GA_FASTSYNC_CNTL); - radeon_ring_write(rdev, PACKET0(R300_GA_POLY_MODE, 0)); + radeon_ring_write(rdev, PACKET0(RB3D_DSTCACHE_CTLSTAT, 0)); + radeon_ring_write(rdev, RB3D_DC_FLUSH | RB3D_DC_FREE); + radeon_ring_write(rdev, PACKET0(ZB_ZCACHE_CTLSTAT, 0)); + radeon_ring_write(rdev, ZC_FLUSH | ZC_FREE); + radeon_ring_write(rdev, PACKET0(GB_MSPOS0, 0)); radeon_ring_write(rdev, - R300_FRONT_PTYPE_TRIANGE | R300_BACK_PTYPE_TRIANGE); - radeon_ring_write(rdev, PACKET0(R300_GA_ROUND_MODE, 0)); + ((6 << MS_X0_SHIFT) | + (6 << MS_Y0_SHIFT) | + (6 << MS_X1_SHIFT) | + (6 << MS_Y1_SHIFT) | + (6 << MS_X2_SHIFT) | + (6 << MS_Y2_SHIFT) | + (6 << MSBD0_Y_SHIFT) | + (6 << MSBD0_X_SHIFT))); + radeon_ring_write(rdev, PACKET0(GB_MSPOS1, 0)); radeon_ring_write(rdev, - R300_GEOMETRY_ROUND_NEAREST | - R300_COLOR_ROUND_NEAREST); + ((6 << MS_X3_SHIFT) | + (6 << MS_Y3_SHIFT) | + (6 << MS_X4_SHIFT) | + (6 << MS_Y4_SHIFT) | + (6 << MS_X5_SHIFT) | + (6 << MS_Y5_SHIFT) | + (6 << MSBD1_SHIFT))); + radeon_ring_write(rdev, PACKET0(GA_ENHANCE, 0)); + radeon_ring_write(rdev, GA_DEADLOCK_CNTL | GA_FASTSYNC_CNTL); + radeon_ring_write(rdev, PACKET0(GA_POLY_MODE, 0)); + radeon_ring_write(rdev, FRONT_PTYPE_TRIANGE | BACK_PTYPE_TRIANGE); + radeon_ring_write(rdev, PACKET0(GA_ROUND_MODE, 0)); + radeon_ring_write(rdev, GEOMETRY_ROUND_NEAREST | COLOR_ROUND_NEAREST); radeon_ring_write(rdev, PACKET0(0x20C8, 0)); radeon_ring_write(rdev, 0); radeon_ring_unlock_commit(rdev); @@ -242,8 +215,8 @@ int rv515_mc_wait_for_idle(struct radeon_device *rdev) for (i = 0; i < rdev->usec_timeout; i++) { /* read MC_STATUS */ - tmp = RREG32_MC(RV515_MC_STATUS); - if (tmp & RV515_MC_STATUS_IDLE) { + tmp = RREG32_MC(MC_STATUS); + if (tmp & MC_STATUS_IDLE) { return 0; } DRM_UDELAY(1); @@ -291,33 +264,33 @@ int rv515_ga_reset(struct radeon_device *rdev) reinit_cp = rdev->cp.ready; rdev->cp.ready = false; for (i = 0; i < rdev->usec_timeout; i++) { - WREG32(RADEON_CP_CSQ_MODE, 0); - WREG32(RADEON_CP_CSQ_CNTL, 0); - WREG32(RADEON_RBBM_SOFT_RESET, 0x32005); - (void)RREG32(RADEON_RBBM_SOFT_RESET); + WREG32(CP_CSQ_MODE, 0); + WREG32(CP_CSQ_CNTL, 0); + WREG32(RBBM_SOFT_RESET, 0x32005); + (void)RREG32(RBBM_SOFT_RESET); udelay(200); - WREG32(RADEON_RBBM_SOFT_RESET, 0); + WREG32(RBBM_SOFT_RESET, 0); /* Wait to prevent race in RBBM_STATUS */ mdelay(1); - tmp = RREG32(RADEON_RBBM_STATUS); + tmp = RREG32(RBBM_STATUS); if (tmp & ((1 << 20) | (1 << 26))) { DRM_ERROR("VAP & CP still busy (RBBM_STATUS=0x%08X)\n", tmp); /* GA still busy soft reset it */ WREG32(0x429C, 0x200); - WREG32(R300_VAP_PVS_STATE_FLUSH_REG, 0); + WREG32(VAP_PVS_STATE_FLUSH_REG, 0); WREG32(0x43E0, 0); WREG32(0x43E4, 0); WREG32(0x24AC, 0); } /* Wait to prevent race in RBBM_STATUS */ mdelay(1); - tmp = RREG32(RADEON_RBBM_STATUS); + tmp = RREG32(RBBM_STATUS); if (!(tmp & ((1 << 20) | (1 << 26)))) { break; } } for (i = 0; i < rdev->usec_timeout; i++) { - tmp = RREG32(RADEON_RBBM_STATUS); + tmp = RREG32(RBBM_STATUS); if (!(tmp & ((1 << 20) | (1 << 26)))) { DRM_INFO("GA reset succeed (RBBM_STATUS=0x%08X)\n", tmp); @@ -331,7 +304,7 @@ int rv515_ga_reset(struct radeon_device *rdev) } DRM_UDELAY(1); } - tmp = RREG32(RADEON_RBBM_STATUS); + tmp = RREG32(RBBM_STATUS); DRM_ERROR("Failed to reset GA ! (RBBM_STATUS=0x%08X)\n", tmp); return -1; } @@ -341,7 +314,7 @@ int rv515_gpu_reset(struct radeon_device *rdev) uint32_t status; /* reset order likely matter */ - status = RREG32(RADEON_RBBM_STATUS); + status = RREG32(RBBM_STATUS); /* reset HDP */ r100_hdp_reset(rdev); /* reset rb2d */ @@ -353,12 +326,12 @@ int rv515_gpu_reset(struct radeon_device *rdev) rv515_ga_reset(rdev); } /* reset CP */ - status = RREG32(RADEON_RBBM_STATUS); + status = RREG32(RBBM_STATUS); if (status & (1 << 16)) { r100_cp_reset(rdev); } /* Check if GPU is idle */ - status = RREG32(RADEON_RBBM_STATUS); + status = RREG32(RBBM_STATUS); if (status & (1 << 31)) { DRM_ERROR("Failed to reset GPU (RBBM_STATUS=0x%08X)\n", status); return -1; @@ -377,8 +350,7 @@ static void rv515_vram_get_type(struct radeon_device *rdev) rdev->mc.vram_width = 128; rdev->mc.vram_is_ddr = true; - tmp = RREG32_MC(RV515_MC_CNTL); - tmp &= RV515_MEM_NUM_CHANNELS_MASK; + tmp = RREG32_MC(RV515_MC_CNTL) & MEM_NUM_CHANNELS_MASK; switch (tmp) { case 0: rdev->mc.vram_width = 64; @@ -394,9 +366,19 @@ static void rv515_vram_get_type(struct radeon_device *rdev) void rv515_vram_info(struct radeon_device *rdev) { + fixed20_12 a; + rv515_vram_get_type(rdev); - - r100_vram_init_sizes(rdev); + rdev->mc.vram_size = RREG32(CONFIG_MEMSIZE); + + rdev->mc.aper_base = drm_get_resource_start(rdev->ddev, 0); + rdev->mc.aper_size = drm_get_resource_len(rdev->ddev, 0); + /* FIXME: we should enforce default clock in case GPU is not in + * default setup + */ + a.full = rfixed_const(100); + rdev->pm.sclk.full = rfixed_const(rdev->clock.default_sclk); + rdev->pm.sclk.full = rfixed_div(rdev->pm.sclk, a); } @@ -407,35 +389,35 @@ uint32_t rv515_mc_rreg(struct radeon_device *rdev, uint32_t reg) { uint32_t r; - WREG32(R520_MC_IND_INDEX, 0x7f0000 | (reg & 0xffff)); - r = RREG32(R520_MC_IND_DATA); - WREG32(R520_MC_IND_INDEX, 0); + WREG32(MC_IND_INDEX, 0x7f0000 | (reg & 0xffff)); + r = RREG32(MC_IND_DATA); + WREG32(MC_IND_INDEX, 0); return r; } void rv515_mc_wreg(struct radeon_device *rdev, uint32_t reg, uint32_t v) { - WREG32(R520_MC_IND_INDEX, 0xff0000 | ((reg) & 0xffff)); - WREG32(R520_MC_IND_DATA, (v)); - WREG32(R520_MC_IND_INDEX, 0); + WREG32(MC_IND_INDEX, 0xff0000 | ((reg) & 0xffff)); + WREG32(MC_IND_DATA, (v)); + WREG32(MC_IND_INDEX, 0); } uint32_t rv515_pcie_rreg(struct radeon_device *rdev, uint32_t reg) { uint32_t r; - WREG32(RADEON_PCIE_INDEX, ((reg) & 0x7ff)); - (void)RREG32(RADEON_PCIE_INDEX); - r = RREG32(RADEON_PCIE_DATA); + WREG32(PCIE_INDEX, ((reg) & 0x7ff)); + (void)RREG32(PCIE_INDEX); + r = RREG32(PCIE_DATA); return r; } void rv515_pcie_wreg(struct radeon_device *rdev, uint32_t reg, uint32_t v) { - WREG32(RADEON_PCIE_INDEX, ((reg) & 0x7ff)); - (void)RREG32(RADEON_PCIE_INDEX); - WREG32(RADEON_PCIE_DATA, (v)); - (void)RREG32(RADEON_PCIE_DATA); + WREG32(PCIE_INDEX, ((reg) & 0x7ff)); + (void)RREG32(PCIE_INDEX); + WREG32(PCIE_DATA, (v)); + (void)RREG32(PCIE_DATA); } @@ -450,13 +432,13 @@ static int rv515_debugfs_pipes_info(struct seq_file *m, void *data) struct radeon_device *rdev = dev->dev_private; uint32_t tmp; - tmp = RREG32(R400_GB_PIPE_SELECT); + tmp = RREG32(GB_PIPE_SELECT); seq_printf(m, "GB_PIPE_SELECT 0x%08x\n", tmp); - tmp = RREG32(R500_SU_REG_DEST); + tmp = RREG32(SU_REG_DEST); seq_printf(m, "SU_REG_DEST 0x%08x\n", tmp); - tmp = RREG32(R300_GB_TILE_CONFIG); + tmp = RREG32(GB_TILE_CONFIG); seq_printf(m, "GB_TILE_CONFIG 0x%08x\n", tmp); - tmp = RREG32(R300_DST_PIPE_CONFIG); + tmp = RREG32(DST_PIPE_CONFIG); seq_printf(m, "DST_PIPE_CONFIG 0x%08x\n", tmp); return 0; } @@ -571,3 +553,551 @@ int rv515_init(struct radeon_device *rdev) rdev->config.r300.reg_safe_bm_size = ARRAY_SIZE(r500_reg_safe_bm); return 0; } + +void atom_rv515_force_tv_scaler(struct radeon_device *rdev) +{ + + WREG32(0x659C, 0x0); + WREG32(0x6594, 0x705); + WREG32(0x65A4, 0x10001); + WREG32(0x65D8, 0x0); + WREG32(0x65B0, 0x0); + WREG32(0x65C0, 0x0); + WREG32(0x65D4, 0x0); + WREG32(0x6578, 0x0); + WREG32(0x657C, 0x841880A8); + WREG32(0x6578, 0x1); + WREG32(0x657C, 0x84208680); + WREG32(0x6578, 0x2); + WREG32(0x657C, 0xBFF880B0); + WREG32(0x6578, 0x100); + WREG32(0x657C, 0x83D88088); + WREG32(0x6578, 0x101); + WREG32(0x657C, 0x84608680); + WREG32(0x6578, 0x102); + WREG32(0x657C, 0xBFF080D0); + WREG32(0x6578, 0x200); + WREG32(0x657C, 0x83988068); + WREG32(0x6578, 0x201); + WREG32(0x657C, 0x84A08680); + WREG32(0x6578, 0x202); + WREG32(0x657C, 0xBFF080F8); + WREG32(0x6578, 0x300); + WREG32(0x657C, 0x83588058); + WREG32(0x6578, 0x301); + WREG32(0x657C, 0x84E08660); + WREG32(0x6578, 0x302); + WREG32(0x657C, 0xBFF88120); + WREG32(0x6578, 0x400); + WREG32(0x657C, 0x83188040); + WREG32(0x6578, 0x401); + WREG32(0x657C, 0x85008660); + WREG32(0x6578, 0x402); + WREG32(0x657C, 0xBFF88150); + WREG32(0x6578, 0x500); + WREG32(0x657C, 0x82D88030); + WREG32(0x6578, 0x501); + WREG32(0x657C, 0x85408640); + WREG32(0x6578, 0x502); + WREG32(0x657C, 0xBFF88180); + WREG32(0x6578, 0x600); + WREG32(0x657C, 0x82A08018); + WREG32(0x6578, 0x601); + WREG32(0x657C, 0x85808620); + WREG32(0x6578, 0x602); + WREG32(0x657C, 0xBFF081B8); + WREG32(0x6578, 0x700); + WREG32(0x657C, 0x82608010); + WREG32(0x6578, 0x701); + WREG32(0x657C, 0x85A08600); + WREG32(0x6578, 0x702); + WREG32(0x657C, 0x800081F0); + WREG32(0x6578, 0x800); + WREG32(0x657C, 0x8228BFF8); + WREG32(0x6578, 0x801); + WREG32(0x657C, 0x85E085E0); + WREG32(0x6578, 0x802); + WREG32(0x657C, 0xBFF88228); + WREG32(0x6578, 0x10000); + WREG32(0x657C, 0x82A8BF00); + WREG32(0x6578, 0x10001); + WREG32(0x657C, 0x82A08CC0); + WREG32(0x6578, 0x10002); + WREG32(0x657C, 0x8008BEF8); + WREG32(0x6578, 0x10100); + WREG32(0x657C, 0x81F0BF28); + WREG32(0x6578, 0x10101); + WREG32(0x657C, 0x83608CA0); + WREG32(0x6578, 0x10102); + WREG32(0x657C, 0x8018BED0); + WREG32(0x6578, 0x10200); + WREG32(0x657C, 0x8148BF38); + WREG32(0x6578, 0x10201); + WREG32(0x657C, 0x84408C80); + WREG32(0x6578, 0x10202); + WREG32(0x657C, 0x8008BEB8); + WREG32(0x6578, 0x10300); + WREG32(0x657C, 0x80B0BF78); + WREG32(0x6578, 0x10301); + WREG32(0x657C, 0x85008C20); + WREG32(0x6578, 0x10302); + WREG32(0x657C, 0x8020BEA0); + WREG32(0x6578, 0x10400); + WREG32(0x657C, 0x8028BF90); + WREG32(0x6578, 0x10401); + WREG32(0x657C, 0x85E08BC0); + WREG32(0x6578, 0x10402); + WREG32(0x657C, 0x8018BE90); + WREG32(0x6578, 0x10500); + WREG32(0x657C, 0xBFB8BFB0); + WREG32(0x6578, 0x10501); + WREG32(0x657C, 0x86C08B40); + WREG32(0x6578, 0x10502); + WREG32(0x657C, 0x8010BE90); + WREG32(0x6578, 0x10600); + WREG32(0x657C, 0xBF58BFC8); + WREG32(0x6578, 0x10601); + WREG32(0x657C, 0x87A08AA0); + WREG32(0x6578, 0x10602); + WREG32(0x657C, 0x8010BE98); + WREG32(0x6578, 0x10700); + WREG32(0x657C, 0xBF10BFF0); + WREG32(0x6578, 0x10701); + WREG32(0x657C, 0x886089E0); + WREG32(0x6578, 0x10702); + WREG32(0x657C, 0x8018BEB0); + WREG32(0x6578, 0x10800); + WREG32(0x657C, 0xBED8BFE8); + WREG32(0x6578, 0x10801); + WREG32(0x657C, 0x89408940); + WREG32(0x6578, 0x10802); + WREG32(0x657C, 0xBFE8BED8); + WREG32(0x6578, 0x20000); + WREG32(0x657C, 0x80008000); + WREG32(0x6578, 0x20001); + WREG32(0x657C, 0x90008000); + WREG32(0x6578, 0x20002); + WREG32(0x657C, 0x80008000); + WREG32(0x6578, 0x20003); + WREG32(0x657C, 0x80008000); + WREG32(0x6578, 0x20100); + WREG32(0x657C, 0x80108000); + WREG32(0x6578, 0x20101); + WREG32(0x657C, 0x8FE0BF70); + WREG32(0x6578, 0x20102); + WREG32(0x657C, 0xBFE880C0); + WREG32(0x6578, 0x20103); + WREG32(0x657C, 0x80008000); + WREG32(0x6578, 0x20200); + WREG32(0x657C, 0x8018BFF8); + WREG32(0x6578, 0x20201); + WREG32(0x657C, 0x8F80BF08); + WREG32(0x6578, 0x20202); + WREG32(0x657C, 0xBFD081A0); + WREG32(0x6578, 0x20203); + WREG32(0x657C, 0xBFF88000); + WREG32(0x6578, 0x20300); + WREG32(0x657C, 0x80188000); + WREG32(0x6578, 0x20301); + WREG32(0x657C, 0x8EE0BEC0); + WREG32(0x6578, 0x20302); + WREG32(0x657C, 0xBFB082A0); + WREG32(0x6578, 0x20303); + WREG32(0x657C, 0x80008000); + WREG32(0x6578, 0x20400); + WREG32(0x657C, 0x80188000); + WREG32(0x6578, 0x20401); + WREG32(0x657C, 0x8E00BEA0); + WREG32(0x6578, 0x20402); + WREG32(0x657C, 0xBF8883C0); + WREG32(0x6578, 0x20403); + WREG32(0x657C, 0x80008000); + WREG32(0x6578, 0x20500); + WREG32(0x657C, 0x80188000); + WREG32(0x6578, 0x20501); + WREG32(0x657C, 0x8D00BE90); + WREG32(0x6578, 0x20502); + WREG32(0x657C, 0xBF588500); + WREG32(0x6578, 0x20503); + WREG32(0x657C, 0x80008008); + WREG32(0x6578, 0x20600); + WREG32(0x657C, 0x80188000); + WREG32(0x6578, 0x20601); + WREG32(0x657C, 0x8BC0BE98); + WREG32(0x6578, 0x20602); + WREG32(0x657C, 0xBF308660); + WREG32(0x6578, 0x20603); + WREG32(0x657C, 0x80008008); + WREG32(0x6578, 0x20700); + WREG32(0x657C, 0x80108000); + WREG32(0x6578, 0x20701); + WREG32(0x657C, 0x8A80BEB0); + WREG32(0x6578, 0x20702); + WREG32(0x657C, 0xBF0087C0); + WREG32(0x6578, 0x20703); + WREG32(0x657C, 0x80008008); + WREG32(0x6578, 0x20800); + WREG32(0x657C, 0x80108000); + WREG32(0x6578, 0x20801); + WREG32(0x657C, 0x8920BED0); + WREG32(0x6578, 0x20802); + WREG32(0x657C, 0xBED08920); + WREG32(0x6578, 0x20803); + WREG32(0x657C, 0x80008010); + WREG32(0x6578, 0x30000); + WREG32(0x657C, 0x90008000); + WREG32(0x6578, 0x30001); + WREG32(0x657C, 0x80008000); + WREG32(0x6578, 0x30100); + WREG32(0x657C, 0x8FE0BF90); + WREG32(0x6578, 0x30101); + WREG32(0x657C, 0xBFF880A0); + WREG32(0x6578, 0x30200); + WREG32(0x657C, 0x8F60BF40); + WREG32(0x6578, 0x30201); + WREG32(0x657C, 0xBFE88180); + WREG32(0x6578, 0x30300); + WREG32(0x657C, 0x8EC0BF00); + WREG32(0x6578, 0x30301); + WREG32(0x657C, 0xBFC88280); + WREG32(0x6578, 0x30400); + WREG32(0x657C, 0x8DE0BEE0); + WREG32(0x6578, 0x30401); + WREG32(0x657C, 0xBFA083A0); + WREG32(0x6578, 0x30500); + WREG32(0x657C, 0x8CE0BED0); + WREG32(0x6578, 0x30501); + WREG32(0x657C, 0xBF7884E0); + WREG32(0x6578, 0x30600); + WREG32(0x657C, 0x8BA0BED8); + WREG32(0x6578, 0x30601); + WREG32(0x657C, 0xBF508640); + WREG32(0x6578, 0x30700); + WREG32(0x657C, 0x8A60BEE8); + WREG32(0x6578, 0x30701); + WREG32(0x657C, 0xBF2087A0); + WREG32(0x6578, 0x30800); + WREG32(0x657C, 0x8900BF00); + WREG32(0x6578, 0x30801); + WREG32(0x657C, 0xBF008900); +} + +struct rv515_watermark { + u32 lb_request_fifo_depth; + fixed20_12 num_line_pair; + fixed20_12 estimated_width; + fixed20_12 worst_case_latency; + fixed20_12 consumption_rate; + fixed20_12 active_time; + fixed20_12 dbpp; + fixed20_12 priority_mark_max; + fixed20_12 priority_mark; + fixed20_12 sclk; +}; + +void rv515_crtc_bandwidth_compute(struct radeon_device *rdev, + struct radeon_crtc *crtc, + struct rv515_watermark *wm) +{ + struct drm_display_mode *mode = &crtc->base.mode; + fixed20_12 a, b, c; + fixed20_12 pclk, request_fifo_depth, tolerable_latency, estimated_width; + fixed20_12 consumption_time, line_time, chunk_time, read_delay_latency; + + if (!crtc->base.enabled) { + /* FIXME: wouldn't it better to set priority mark to maximum */ + wm->lb_request_fifo_depth = 4; + return; + } + + if (crtc->vsc.full > rfixed_const(2)) + wm->num_line_pair.full = rfixed_const(2); + else + wm->num_line_pair.full = rfixed_const(1); + + b.full = rfixed_const(mode->crtc_hdisplay); + c.full = rfixed_const(256); + a.full = rfixed_mul(wm->num_line_pair, b); + request_fifo_depth.full = rfixed_div(a, c); + if (a.full < rfixed_const(4)) { + wm->lb_request_fifo_depth = 4; + } else { + wm->lb_request_fifo_depth = rfixed_trunc(request_fifo_depth); + } + + /* Determine consumption rate + * pclk = pixel clock period(ns) = 1000 / (mode.clock / 1000) + * vtaps = number of vertical taps, + * vsc = vertical scaling ratio, defined as source/destination + * hsc = horizontal scaling ration, defined as source/destination + */ + a.full = rfixed_const(mode->clock); + b.full = rfixed_const(1000); + a.full = rfixed_div(a, b); + pclk.full = rfixed_div(b, a); + if (crtc->rmx_type != RMX_OFF) { + b.full = rfixed_const(2); + if (crtc->vsc.full > b.full) + b.full = crtc->vsc.full; + b.full = rfixed_mul(b, crtc->hsc); + c.full = rfixed_const(2); + b.full = rfixed_div(b, c); + consumption_time.full = rfixed_div(pclk, b); + } else { + consumption_time.full = pclk.full; + } + a.full = rfixed_const(1); + wm->consumption_rate.full = rfixed_div(a, consumption_time); + + + /* Determine line time + * LineTime = total time for one line of displayhtotal + * LineTime = total number of horizontal pixels + * pclk = pixel clock period(ns) + */ + a.full = rfixed_const(crtc->base.mode.crtc_htotal); + line_time.full = rfixed_mul(a, pclk); + + /* Determine active time + * ActiveTime = time of active region of display within one line, + * hactive = total number of horizontal active pixels + * htotal = total number of horizontal pixels + */ + a.full = rfixed_const(crtc->base.mode.crtc_htotal); + b.full = rfixed_const(crtc->base.mode.crtc_hdisplay); + wm->active_time.full = rfixed_mul(line_time, b); + wm->active_time.full = rfixed_div(wm->active_time, a); + + /* Determine chunk time + * ChunkTime = the time it takes the DCP to send one chunk of data + * to the LB which consists of pipeline delay and inter chunk gap + * sclk = system clock(Mhz) + */ + a.full = rfixed_const(600 * 1000); + chunk_time.full = rfixed_div(a, rdev->pm.sclk); + read_delay_latency.full = rfixed_const(1000); + + /* Determine the worst case latency + * NumLinePair = Number of line pairs to request(1=2 lines, 2=4 lines) + * WorstCaseLatency = worst case time from urgent to when the MC starts + * to return data + * READ_DELAY_IDLE_MAX = constant of 1us + * ChunkTime = time it takes the DCP to send one chunk of data to the LB + * which consists of pipeline delay and inter chunk gap + */ + if (rfixed_trunc(wm->num_line_pair) > 1) { + a.full = rfixed_const(3); + wm->worst_case_latency.full = rfixed_mul(a, chunk_time); + wm->worst_case_latency.full += read_delay_latency.full; + } else { + wm->worst_case_latency.full = chunk_time.full + read_delay_latency.full; + } + + /* Determine the tolerable latency + * TolerableLatency = Any given request has only 1 line time + * for the data to be returned + * LBRequestFifoDepth = Number of chunk requests the LB can + * put into the request FIFO for a display + * LineTime = total time for one line of display + * ChunkTime = the time it takes the DCP to send one chunk + * of data to the LB which consists of + * pipeline delay and inter chunk gap + */ + if ((2+wm->lb_request_fifo_depth) >= rfixed_trunc(request_fifo_depth)) { + tolerable_latency.full = line_time.full; + } else { + tolerable_latency.full = rfixed_const(wm->lb_request_fifo_depth - 2); + tolerable_latency.full = request_fifo_depth.full - tolerable_latency.full; + tolerable_latency.full = rfixed_mul(tolerable_latency, chunk_time); + tolerable_latency.full = line_time.full - tolerable_latency.full; + } + /* We assume worst case 32bits (4 bytes) */ + wm->dbpp.full = rfixed_const(2 * 16); + + /* Determine the maximum priority mark + * width = viewport width in pixels + */ + a.full = rfixed_const(16); + wm->priority_mark_max.full = rfixed_const(crtc->base.mode.crtc_hdisplay); + wm->priority_mark_max.full = rfixed_div(wm->priority_mark_max, a); + + /* Determine estimated width */ + estimated_width.full = tolerable_latency.full - wm->worst_case_latency.full; + estimated_width.full = rfixed_div(estimated_width, consumption_time); + if (rfixed_trunc(estimated_width) > crtc->base.mode.crtc_hdisplay) { + wm->priority_mark.full = rfixed_const(10); + } else { + a.full = rfixed_const(16); + wm->priority_mark.full = rfixed_div(estimated_width, a); + wm->priority_mark.full = wm->priority_mark_max.full - wm->priority_mark.full; + } +} + +void rv515_bandwidth_avivo_update(struct radeon_device *rdev) +{ + struct drm_display_mode *mode0 = NULL; + struct drm_display_mode *mode1 = NULL; + struct rv515_watermark wm0; + struct rv515_watermark wm1; + u32 tmp; + fixed20_12 priority_mark02, priority_mark12, fill_rate; + fixed20_12 a, b; + + if (rdev->mode_info.crtcs[0]->base.enabled) + mode0 = &rdev->mode_info.crtcs[0]->base.mode; + if (rdev->mode_info.crtcs[1]->base.enabled) + mode1 = &rdev->mode_info.crtcs[1]->base.mode; + rs690_line_buffer_adjust(rdev, mode0, mode1); + + rv515_crtc_bandwidth_compute(rdev, rdev->mode_info.crtcs[0], &wm0); + rv515_crtc_bandwidth_compute(rdev, rdev->mode_info.crtcs[1], &wm1); + + tmp = wm0.lb_request_fifo_depth; + tmp |= wm1.lb_request_fifo_depth << 16; + WREG32(LB_MAX_REQ_OUTSTANDING, tmp); + + if (mode0 && mode1) { + if (rfixed_trunc(wm0.dbpp) > 64) + a.full = rfixed_div(wm0.dbpp, wm0.num_line_pair); + else + a.full = wm0.num_line_pair.full; + if (rfixed_trunc(wm1.dbpp) > 64) + b.full = rfixed_div(wm1.dbpp, wm1.num_line_pair); + else + b.full = wm1.num_line_pair.full; + a.full += b.full; + fill_rate.full = rfixed_div(wm0.sclk, a); + if (wm0.consumption_rate.full > fill_rate.full) { + b.full = wm0.consumption_rate.full - fill_rate.full; + b.full = rfixed_mul(b, wm0.active_time); + a.full = rfixed_const(16); + b.full = rfixed_div(b, a); + a.full = rfixed_mul(wm0.worst_case_latency, + wm0.consumption_rate); + priority_mark02.full = a.full + b.full; + } else { + a.full = rfixed_mul(wm0.worst_case_latency, + wm0.consumption_rate); + b.full = rfixed_const(16 * 1000); + priority_mark02.full = rfixed_div(a, b); + } + if (wm1.consumption_rate.full > fill_rate.full) { + b.full = wm1.consumption_rate.full - fill_rate.full; + b.full = rfixed_mul(b, wm1.active_time); + a.full = rfixed_const(16); + b.full = rfixed_div(b, a); + a.full = rfixed_mul(wm1.worst_case_latency, + wm1.consumption_rate); + priority_mark12.full = a.full + b.full; + } else { + a.full = rfixed_mul(wm1.worst_case_latency, + wm1.consumption_rate); + b.full = rfixed_const(16 * 1000); + priority_mark12.full = rfixed_div(a, b); + } + if (wm0.priority_mark.full > priority_mark02.full) + priority_mark02.full = wm0.priority_mark.full; + if (rfixed_trunc(priority_mark02) < 0) + priority_mark02.full = 0; + if (wm0.priority_mark_max.full > priority_mark02.full) + priority_mark02.full = wm0.priority_mark_max.full; + if (wm1.priority_mark.full > priority_mark12.full) + priority_mark12.full = wm1.priority_mark.full; + if (rfixed_trunc(priority_mark12) < 0) + priority_mark12.full = 0; + if (wm1.priority_mark_max.full > priority_mark12.full) + priority_mark12.full = wm1.priority_mark_max.full; + WREG32(D1MODE_PRIORITY_A_CNT, rfixed_trunc(priority_mark02)); + WREG32(D1MODE_PRIORITY_B_CNT, rfixed_trunc(priority_mark02)); + WREG32(D2MODE_PRIORITY_A_CNT, rfixed_trunc(priority_mark12)); + WREG32(D2MODE_PRIORITY_B_CNT, rfixed_trunc(priority_mark12)); + } else if (mode0) { + if (rfixed_trunc(wm0.dbpp) > 64) + a.full = rfixed_div(wm0.dbpp, wm0.num_line_pair); + else + a.full = wm0.num_line_pair.full; + fill_rate.full = rfixed_div(wm0.sclk, a); + if (wm0.consumption_rate.full > fill_rate.full) { + b.full = wm0.consumption_rate.full - fill_rate.full; + b.full = rfixed_mul(b, wm0.active_time); + a.full = rfixed_const(16); + b.full = rfixed_div(b, a); + a.full = rfixed_mul(wm0.worst_case_latency, + wm0.consumption_rate); + priority_mark02.full = a.full + b.full; + } else { + a.full = rfixed_mul(wm0.worst_case_latency, + wm0.consumption_rate); + b.full = rfixed_const(16); + priority_mark02.full = rfixed_div(a, b); + } + if (wm0.priority_mark.full > priority_mark02.full) + priority_mark02.full = wm0.priority_mark.full; + if (rfixed_trunc(priority_mark02) < 0) + priority_mark02.full = 0; + if (wm0.priority_mark_max.full > priority_mark02.full) + priority_mark02.full = wm0.priority_mark_max.full; + WREG32(D1MODE_PRIORITY_A_CNT, rfixed_trunc(priority_mark02)); + WREG32(D1MODE_PRIORITY_B_CNT, rfixed_trunc(priority_mark02)); + WREG32(D2MODE_PRIORITY_A_CNT, MODE_PRIORITY_OFF); + WREG32(D2MODE_PRIORITY_B_CNT, MODE_PRIORITY_OFF); + } else { + if (rfixed_trunc(wm1.dbpp) > 64) + a.full = rfixed_div(wm1.dbpp, wm1.num_line_pair); + else + a.full = wm1.num_line_pair.full; + fill_rate.full = rfixed_div(wm1.sclk, a); + if (wm1.consumption_rate.full > fill_rate.full) { + b.full = wm1.consumption_rate.full - fill_rate.full; + b.full = rfixed_mul(b, wm1.active_time); + a.full = rfixed_const(16); + b.full = rfixed_div(b, a); + a.full = rfixed_mul(wm1.worst_case_latency, + wm1.consumption_rate); + priority_mark12.full = a.full + b.full; + } else { + a.full = rfixed_mul(wm1.worst_case_latency, + wm1.consumption_rate); + b.full = rfixed_const(16 * 1000); + priority_mark12.full = rfixed_div(a, b); + } + if (wm1.priority_mark.full > priority_mark12.full) + priority_mark12.full = wm1.priority_mark.full; + if (rfixed_trunc(priority_mark12) < 0) + priority_mark12.full = 0; + if (wm1.priority_mark_max.full > priority_mark12.full) + priority_mark12.full = wm1.priority_mark_max.full; + WREG32(D1MODE_PRIORITY_A_CNT, MODE_PRIORITY_OFF); + WREG32(D1MODE_PRIORITY_B_CNT, MODE_PRIORITY_OFF); + WREG32(D2MODE_PRIORITY_A_CNT, rfixed_trunc(priority_mark12)); + WREG32(D2MODE_PRIORITY_B_CNT, rfixed_trunc(priority_mark12)); + } +} + +void rv515_bandwidth_update(struct radeon_device *rdev) +{ + uint32_t tmp; + struct drm_display_mode *mode0 = NULL; + struct drm_display_mode *mode1 = NULL; + + if (rdev->mode_info.crtcs[0]->base.enabled) + mode0 = &rdev->mode_info.crtcs[0]->base.mode; + if (rdev->mode_info.crtcs[1]->base.enabled) + mode1 = &rdev->mode_info.crtcs[1]->base.mode; + /* + * Set display0/1 priority up in the memory controller for + * modes if the user specifies HIGH for displaypriority + * option. + */ + if (rdev->disp_priority == 2) { + tmp = RREG32_MC(MC_MISC_LAT_TIMER); + tmp &= ~MC_DISP1R_INIT_LAT_MASK; + tmp &= ~MC_DISP0R_INIT_LAT_MASK; + if (mode1) + tmp |= (1 << MC_DISP1R_INIT_LAT_SHIFT); + if (mode0) + tmp |= (1 << MC_DISP0R_INIT_LAT_SHIFT); + WREG32_MC(MC_MISC_LAT_TIMER, tmp); + } + rv515_bandwidth_avivo_update(rdev); +} diff --git a/drivers/gpu/drm/radeon/rv515r.h b/drivers/gpu/drm/radeon/rv515r.h new file mode 100644 index 00000000000..f3cf8403990 --- /dev/null +++ b/drivers/gpu/drm/radeon/rv515r.h @@ -0,0 +1,170 @@ +/* + * Copyright 2008 Advanced Micro Devices, Inc. + * Copyright 2008 Red Hat Inc. + * Copyright 2009 Jerome Glisse. + * + * Permission is hereby granted, free of charge, to any person obtaining a + * copy of this software and associated documentation files (the "Software"), + * to deal in the Software without restriction, including without limitation + * the rights to use, copy, modify, merge, publish, distribute, sublicense, + * and/or sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL + * THE COPYRIGHT HOLDER(S) OR AUTHOR(S) BE LIABLE FOR ANY CLAIM, DAMAGES OR + * OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, + * ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + * + * Authors: Dave Airlie + * Alex Deucher + * Jerome Glisse + */ +#ifndef RV515R_H +#define RV515R_H + +/* RV515 registers */ +#define PCIE_INDEX 0x0030 +#define PCIE_DATA 0x0034 +#define MC_IND_INDEX 0x0070 +#define MC_IND_WR_EN (1 << 24) +#define MC_IND_DATA 0x0074 +#define RBBM_SOFT_RESET 0x00F0 +#define CONFIG_MEMSIZE 0x00F8 +#define HDP_FB_LOCATION 0x0134 +#define CP_CSQ_CNTL 0x0740 +#define CP_CSQ_MODE 0x0744 +#define CP_CSQ_ADDR 0x07F0 +#define CP_CSQ_DATA 0x07F4 +#define CP_CSQ_STAT 0x07F8 +#define CP_CSQ2_STAT 0x07FC +#define RBBM_STATUS 0x0E40 +#define DST_PIPE_CONFIG 0x170C +#define WAIT_UNTIL 0x1720 +#define WAIT_2D_IDLE (1 << 14) +#define WAIT_3D_IDLE (1 << 15) +#define WAIT_2D_IDLECLEAN (1 << 16) +#define WAIT_3D_IDLECLEAN (1 << 17) +#define ISYNC_CNTL 0x1724 +#define ISYNC_ANY2D_IDLE3D (1 << 0) +#define ISYNC_ANY3D_IDLE2D (1 << 1) +#define ISYNC_TRIG2D_IDLE3D (1 << 2) +#define ISYNC_TRIG3D_IDLE2D (1 << 3) +#define ISYNC_WAIT_IDLEGUI (1 << 4) +#define ISYNC_CPSCRATCH_IDLEGUI (1 << 5) +#define VAP_INDEX_OFFSET 0x208C +#define VAP_PVS_STATE_FLUSH_REG 0x2284 +#define GB_ENABLE 0x4008 +#define GB_MSPOS0 0x4010 +#define MS_X0_SHIFT 0 +#define MS_Y0_SHIFT 4 +#define MS_X1_SHIFT 8 +#define MS_Y1_SHIFT 12 +#define MS_X2_SHIFT 16 +#define MS_Y2_SHIFT 20 +#define MSBD0_Y_SHIFT 24 +#define MSBD0_X_SHIFT 28 +#define GB_MSPOS1 0x4014 +#define MS_X3_SHIFT 0 +#define MS_Y3_SHIFT 4 +#define MS_X4_SHIFT 8 +#define MS_Y4_SHIFT 12 +#define MS_X5_SHIFT 16 +#define MS_Y5_SHIFT 20 +#define MSBD1_SHIFT 24 +#define GB_TILE_CONFIG 0x4018 +#define ENABLE_TILING (1 << 0) +#define PIPE_COUNT_MASK 0x0000000E +#define PIPE_COUNT_SHIFT 1 +#define TILE_SIZE_8 (0 << 4) +#define TILE_SIZE_16 (1 << 4) +#define TILE_SIZE_32 (2 << 4) +#define SUBPIXEL_1_12 (0 << 16) +#define SUBPIXEL_1_16 (1 << 16) +#define GB_SELECT 0x401C +#define GB_AA_CONFIG 0x4020 +#define GB_PIPE_SELECT 0x402C +#define GA_ENHANCE 0x4274 +#define GA_DEADLOCK_CNTL (1 << 0) +#define GA_FASTSYNC_CNTL (1 << 1) +#define GA_POLY_MODE 0x4288 +#define FRONT_PTYPE_POINT (0 << 4) +#define FRONT_PTYPE_LINE (1 << 4) +#define FRONT_PTYPE_TRIANGE (2 << 4) +#define BACK_PTYPE_POINT (0 << 7) +#define BACK_PTYPE_LINE (1 << 7) +#define BACK_PTYPE_TRIANGE (2 << 7) +#define GA_ROUND_MODE 0x428C +#define GEOMETRY_ROUND_TRUNC (0 << 0) +#define GEOMETRY_ROUND_NEAREST (1 << 0) +#define COLOR_ROUND_TRUNC (0 << 2) +#define COLOR_ROUND_NEAREST (1 << 2) +#define SU_REG_DEST 0x42C8 +#define RB3D_DSTCACHE_CTLSTAT 0x4E4C +#define RB3D_DC_FLUSH (2 << 0) +#define RB3D_DC_FREE (2 << 2) +#define RB3D_DC_FINISH (1 << 4) +#define ZB_ZCACHE_CTLSTAT 0x4F18 +#define ZC_FLUSH (1 << 0) +#define ZC_FREE (1 << 1) +#define DC_LB_MEMORY_SPLIT 0x6520 +#define DC_LB_MEMORY_SPLIT_MASK 0x00000003 +#define DC_LB_MEMORY_SPLIT_SHIFT 0 +#define DC_LB_MEMORY_SPLIT_D1HALF_D2HALF 0 +#define DC_LB_MEMORY_SPLIT_D1_3Q_D2_1Q 1 +#define DC_LB_MEMORY_SPLIT_D1_ONLY 2 +#define DC_LB_MEMORY_SPLIT_D1_1Q_D2_3Q 3 +#define DC_LB_MEMORY_SPLIT_SHIFT_MODE (1 << 2) +#define DC_LB_DISP1_END_ADR_SHIFT 4 +#define DC_LB_DISP1_END_ADR_MASK 0x00007FF0 +#define D1MODE_PRIORITY_A_CNT 0x6548 +#define MODE_PRIORITY_MARK_MASK 0x00007FFF +#define MODE_PRIORITY_OFF (1 << 16) +#define MODE_PRIORITY_ALWAYS_ON (1 << 20) +#define MODE_PRIORITY_FORCE_MASK (1 << 24) +#define D1MODE_PRIORITY_B_CNT 0x654C +#define LB_MAX_REQ_OUTSTANDING 0x6D58 +#define LB_D1_MAX_REQ_OUTSTANDING_MASK 0x0000000F +#define LB_D1_MAX_REQ_OUTSTANDING_SHIFT 0 +#define LB_D2_MAX_REQ_OUTSTANDING_MASK 0x000F0000 +#define LB_D2_MAX_REQ_OUTSTANDING_SHIFT 16 +#define D2MODE_PRIORITY_A_CNT 0x6D48 +#define D2MODE_PRIORITY_B_CNT 0x6D4C + +/* ix[MC] registers */ +#define MC_FB_LOCATION 0x01 +#define MC_FB_START_MASK 0x0000FFFF +#define MC_FB_START_SHIFT 0 +#define MC_FB_TOP_MASK 0xFFFF0000 +#define MC_FB_TOP_SHIFT 16 +#define MC_AGP_LOCATION 0x02 +#define MC_AGP_START_MASK 0x0000FFFF +#define MC_AGP_START_SHIFT 0 +#define MC_AGP_TOP_MASK 0xFFFF0000 +#define MC_AGP_TOP_SHIFT 16 +#define MC_AGP_BASE 0x03 +#define MC_AGP_BASE_2 0x04 +#define MC_CNTL 0x5 +#define MEM_NUM_CHANNELS_MASK 0x00000003 +#define MC_STATUS 0x08 +#define MC_STATUS_IDLE (1 << 4) +#define MC_MISC_LAT_TIMER 0x09 +#define MC_CPR_INIT_LAT_MASK 0x0000000F +#define MC_VF_INIT_LAT_MASK 0x000000F0 +#define MC_DISP0R_INIT_LAT_MASK 0x00000F00 +#define MC_DISP0R_INIT_LAT_SHIFT 8 +#define MC_DISP1R_INIT_LAT_MASK 0x0000F000 +#define MC_DISP1R_INIT_LAT_SHIFT 12 +#define MC_FIXED_INIT_LAT_MASK 0x000F0000 +#define MC_E2R_INIT_LAT_MASK 0x00F00000 +#define SAME_PAGE_PRIO_MASK 0x0F000000 +#define MC_GLOBW_INIT_LAT_MASK 0xF0000000 + + +#endif + -- cgit v1.2.3 From e46074effd5510e7a8fe34b93828d98a50835da2 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Michel=20D=C3=A4nzer?= Date: Tue, 28 Jul 2009 12:30:55 +0200 Subject: drm/radeon: Don't unreserve twice on failure to validate. MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit This is done later in radeon_object_list_unvalidate(). Doing it twice triggers a BUG in TTM, rendering X on KMS unusable until reboot. Signed-off-by: Michel Dänzer Signed-off-by: Dave Airlie --- drivers/gpu/drm/radeon/radeon_object.c | 1 - 1 file changed, 1 deletion(-) diff --git a/drivers/gpu/drm/radeon/radeon_object.c b/drivers/gpu/drm/radeon/radeon_object.c index d5b1fd562d8..3961a44c5dc 100644 --- a/drivers/gpu/drm/radeon/radeon_object.c +++ b/drivers/gpu/drm/radeon/radeon_object.c @@ -433,7 +433,6 @@ int radeon_object_list_validate(struct list_head *head, void *fence) robj->tobj.proposed_placement, true, false); if (unlikely(r)) { - radeon_object_list_unreserve(head); DRM_ERROR("radeon: failed to validate.\n"); return r; } -- cgit v1.2.3 From 1ab2e1059916b917af19e4137a4222988bd7a169 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Michel=20D=C3=A4nzer?= Date: Tue, 28 Jul 2009 12:30:56 +0200 Subject: drm/radeon: Fall back to evicting BOs with memcpy if necessary. MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Otherwise if there's no GTT space we would fail the eviction, leading to cascaded failure. Signed-off-by: Michel Dänzer Signed-off-by: Dave Airlie --- drivers/gpu/drm/radeon/radeon_ttm.c | 15 +++++++++------ 1 file changed, 9 insertions(+), 6 deletions(-) diff --git a/drivers/gpu/drm/radeon/radeon_ttm.c b/drivers/gpu/drm/radeon/radeon_ttm.c index 37e1cbcce3a..f3469b96208 100644 --- a/drivers/gpu/drm/radeon/radeon_ttm.c +++ b/drivers/gpu/drm/radeon/radeon_ttm.c @@ -355,23 +355,26 @@ static int radeon_bo_move(struct ttm_buffer_object *bo, if (!rdev->cp.ready) { /* use memcpy */ DRM_ERROR("CP is not ready use memcpy.\n"); - return ttm_bo_move_memcpy(bo, evict, no_wait, new_mem); + goto memcpy; } if (old_mem->mem_type == TTM_PL_VRAM && new_mem->mem_type == TTM_PL_SYSTEM) { - return radeon_move_vram_ram(bo, evict, interruptible, + r = radeon_move_vram_ram(bo, evict, interruptible, no_wait, new_mem); } else if (old_mem->mem_type == TTM_PL_SYSTEM && new_mem->mem_type == TTM_PL_VRAM) { - return radeon_move_ram_vram(bo, evict, interruptible, + r = radeon_move_ram_vram(bo, evict, interruptible, no_wait, new_mem); } else { r = radeon_move_blit(bo, evict, no_wait, new_mem, old_mem); - if (unlikely(r)) { - return r; - } } + + if (r) { +memcpy: + r = ttm_bo_move_memcpy(bo, evict, no_wait, new_mem); + } + return r; } -- cgit v1.2.3 From 664f86590295217b2319edf88830e87b800f6c4a Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Michel=20D=C3=A4nzer?= Date: Tue, 28 Jul 2009 12:30:57 +0200 Subject: drm/radeon: Pay more attention to object placement requested by userspace. MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Previously we were basically always setting the GTT and VRAM flags regardless of what userspace requested. Signed-off-by: Michel Dänzer Signed-off-by: Dave Airlie --- drivers/gpu/drm/radeon/radeon_object.c | 25 +++++++++++-------------- 1 file changed, 11 insertions(+), 14 deletions(-) diff --git a/drivers/gpu/drm/radeon/radeon_object.c b/drivers/gpu/drm/radeon/radeon_object.c index 3961a44c5dc..81573c3a9b4 100644 --- a/drivers/gpu/drm/radeon/radeon_object.c +++ b/drivers/gpu/drm/radeon/radeon_object.c @@ -103,16 +103,16 @@ static inline uint32_t radeon_object_flags_from_domain(uint32_t domain) { uint32_t flags = 0; if (domain & RADEON_GEM_DOMAIN_VRAM) { - flags |= TTM_PL_FLAG_VRAM; + flags |= TTM_PL_FLAG_VRAM | TTM_PL_FLAG_WC | TTM_PL_FLAG_UNCACHED; } if (domain & RADEON_GEM_DOMAIN_GTT) { - flags |= TTM_PL_FLAG_TT; + flags |= TTM_PL_FLAG_TT | TTM_PL_FLAG_WC | TTM_PL_FLAG_UNCACHED; } if (domain & RADEON_GEM_DOMAIN_CPU) { - flags |= TTM_PL_FLAG_SYSTEM; + flags |= TTM_PL_FLAG_SYSTEM | TTM_PL_MASK_CACHING; } if (!flags) { - flags |= TTM_PL_FLAG_SYSTEM; + flags |= TTM_PL_FLAG_SYSTEM | TTM_PL_MASK_CACHING; } return flags; } @@ -408,7 +408,6 @@ int radeon_object_list_validate(struct list_head *head, void *fence) struct radeon_object *robj; struct radeon_fence *old_fence = NULL; struct list_head *i; - uint32_t flags; int r; r = radeon_object_list_reserve(head); @@ -419,16 +418,14 @@ int radeon_object_list_validate(struct list_head *head, void *fence) list_for_each(i, head) { lobj = list_entry(i, struct radeon_object_list, list); robj = lobj->robj; - if (lobj->wdomain) { - flags = radeon_object_flags_from_domain(lobj->wdomain); - flags |= TTM_PL_FLAG_TT; - } else { - flags = radeon_object_flags_from_domain(lobj->rdomain); - flags |= TTM_PL_FLAG_TT; - flags |= TTM_PL_FLAG_VRAM; - } if (!robj->pin_count) { - robj->tobj.proposed_placement = flags | TTM_PL_MASK_CACHING; + if (lobj->wdomain) { + robj->tobj.proposed_placement = + radeon_object_flags_from_domain(lobj->wdomain); + } else { + robj->tobj.proposed_placement = + radeon_object_flags_from_domain(lobj->rdomain); + } r = ttm_buffer_object_validate(&robj->tobj, robj->tobj.proposed_placement, true, false); -- cgit v1.2.3 From 7a50f01a4ab89d5c05eb2cf62e206ac0bfc61d2c Mon Sep 17 00:00:00 2001 From: Dave Airlie Date: Tue, 21 Jul 2009 20:39:30 +1000 Subject: drm/radeon/kms: vram sizing on certain r100 chips needs workaround. If an rn50/r100/m6/m7 GPU has < 64MB RAM, i.e. 8/16/32, the aperture used to calculate the MC_FB_LOCATION needs to be worked out from the CONFIG_APER_SIZE register, and not the actual vram size. TTM VRAM size was also being initialised wrong, use actual vram size to initialise it. Signed-off-by: Dave Airlie --- drivers/gpu/drm/radeon/r100.c | 34 ++++++++++++++++++++++------------ drivers/gpu/drm/radeon/r520.c | 4 ++-- drivers/gpu/drm/radeon/r600.c | 5 +++-- drivers/gpu/drm/radeon/radeon.h | 5 ++++- drivers/gpu/drm/radeon/radeon_device.c | 20 +++++++++++--------- drivers/gpu/drm/radeon/radeon_gem.c | 4 ++-- drivers/gpu/drm/radeon/radeon_ttm.c | 4 ++-- drivers/gpu/drm/radeon/rs400.c | 4 ++-- drivers/gpu/drm/radeon/rs600.c | 2 +- drivers/gpu/drm/radeon/rs690.c | 7 ++++--- drivers/gpu/drm/radeon/rv515.c | 7 ++----- drivers/gpu/drm/radeon/rv770.c | 2 +- 12 files changed, 56 insertions(+), 42 deletions(-) diff --git a/drivers/gpu/drm/radeon/r100.c b/drivers/gpu/drm/radeon/r100.c index 0e00fef0b84..05a44896dff 100644 --- a/drivers/gpu/drm/radeon/r100.c +++ b/drivers/gpu/drm/radeon/r100.c @@ -173,8 +173,12 @@ void r100_mc_setup(struct radeon_device *rdev) DRM_ERROR("Failed to register debugfs file for R100 MC !\n"); } /* Write VRAM size in case we are limiting it */ - WREG32(RADEON_CONFIG_MEMSIZE, rdev->mc.vram_size); - tmp = rdev->mc.vram_location + rdev->mc.vram_size - 1; + WREG32(RADEON_CONFIG_MEMSIZE, rdev->mc.real_vram_size); + /* Novell bug 204882 for RN50/M6/M7 with 8/16/32MB VRAM, + * if the aperture is 64MB but we have 32MB VRAM + * we report only 32MB VRAM but we have to set MC_FB_LOCATION + * to 64MB, otherwise the gpu accidentially dies */ + tmp = rdev->mc.vram_location + rdev->mc.mc_vram_size - 1; tmp = REG_SET(RADEON_MC_FB_TOP, tmp >> 16); tmp |= REG_SET(RADEON_MC_FB_START, rdev->mc.vram_location >> 16); WREG32(RADEON_MC_FB_LOCATION, tmp); @@ -1447,25 +1451,28 @@ void r100_vram_init_sizes(struct radeon_device *rdev) uint32_t tom; /* read NB_TOM to get the amount of ram stolen for the GPU */ tom = RREG32(RADEON_NB_TOM); - rdev->mc.vram_size = (((tom >> 16) - (tom & 0xffff) + 1) << 16); + rdev->mc.real_vram_size = (((tom >> 16) - (tom & 0xffff) + 1) << 16); /* for IGPs we need to keep VRAM where it was put by the BIOS */ rdev->mc.vram_location = (tom & 0xffff) << 16; - WREG32(RADEON_CONFIG_MEMSIZE, rdev->mc.vram_size); + WREG32(RADEON_CONFIG_MEMSIZE, rdev->mc.real_vram_size); + rdev->mc.mc_vram_size = rdev->mc.real_vram_size; } else { - rdev->mc.vram_size = RREG32(RADEON_CONFIG_MEMSIZE); + rdev->mc.real_vram_size = RREG32(RADEON_CONFIG_MEMSIZE); /* Some production boards of m6 will report 0 * if it's 8 MB */ - if (rdev->mc.vram_size == 0) { - rdev->mc.vram_size = 8192 * 1024; - WREG32(RADEON_CONFIG_MEMSIZE, rdev->mc.vram_size); + if (rdev->mc.real_vram_size == 0) { + rdev->mc.real_vram_size = 8192 * 1024; + WREG32(RADEON_CONFIG_MEMSIZE, rdev->mc.real_vram_size); } /* let driver place VRAM */ rdev->mc.vram_location = 0xFFFFFFFFUL; /* Fix for RN50, M6, M7 with 8/16/32(??) MBs of VRAM - * Novell bug 204882 + along with lots of ubuntu ones */ - if (config_aper_size > rdev->mc.vram_size) - rdev->mc.vram_size = config_aper_size; + if (config_aper_size > rdev->mc.real_vram_size) + rdev->mc.mc_vram_size = config_aper_size; + else + rdev->mc.mc_vram_size = rdev->mc.real_vram_size; } /* work out accessible VRAM */ @@ -1477,8 +1484,11 @@ void r100_vram_init_sizes(struct radeon_device *rdev) if (accessible > rdev->mc.aper_size) accessible = rdev->mc.aper_size; - if (rdev->mc.vram_size > rdev->mc.aper_size) - rdev->mc.vram_size = rdev->mc.aper_size; + if (rdev->mc.mc_vram_size > rdev->mc.aper_size) + rdev->mc.mc_vram_size = rdev->mc.aper_size; + + if (rdev->mc.real_vram_size > rdev->mc.aper_size) + rdev->mc.real_vram_size = rdev->mc.aper_size; } void r100_vram_info(struct radeon_device *rdev) diff --git a/drivers/gpu/drm/radeon/r520.c b/drivers/gpu/drm/radeon/r520.c index 0a981e2ee2f..09fb0b6ec7d 100644 --- a/drivers/gpu/drm/radeon/r520.c +++ b/drivers/gpu/drm/radeon/r520.c @@ -95,8 +95,8 @@ int r520_mc_init(struct radeon_device *rdev) "programming pipes. Bad things might happen.\n"); } /* Write VRAM size in case we are limiting it */ - WREG32(RADEON_CONFIG_MEMSIZE, rdev->mc.vram_size); - tmp = rdev->mc.vram_location + rdev->mc.vram_size - 1; + WREG32(RADEON_CONFIG_MEMSIZE, rdev->mc.real_vram_size); + tmp = rdev->mc.vram_location + rdev->mc.mc_vram_size - 1; tmp = REG_SET(R520_MC_FB_TOP, tmp >> 16); tmp |= REG_SET(R520_MC_FB_START, rdev->mc.vram_location >> 16); WREG32_MC(R520_MC_FB_LOCATION, tmp); diff --git a/drivers/gpu/drm/radeon/r600.c b/drivers/gpu/drm/radeon/r600.c index c45559fc97f..538cd907df6 100644 --- a/drivers/gpu/drm/radeon/r600.c +++ b/drivers/gpu/drm/radeon/r600.c @@ -67,7 +67,7 @@ int r600_mc_init(struct radeon_device *rdev) "programming pipes. Bad things might happen.\n"); } - tmp = rdev->mc.vram_location + rdev->mc.vram_size - 1; + tmp = rdev->mc.vram_location + rdev->mc.mc_vram_size - 1; tmp = REG_SET(R600_MC_FB_TOP, tmp >> 24); tmp |= REG_SET(R600_MC_FB_BASE, rdev->mc.vram_location >> 24); WREG32(R600_MC_VM_FB_LOCATION, tmp); @@ -140,7 +140,8 @@ void r600_vram_get_type(struct radeon_device *rdev) void r600_vram_info(struct radeon_device *rdev) { r600_vram_get_type(rdev); - rdev->mc.vram_size = RREG32(R600_CONFIG_MEMSIZE); + rdev->mc.real_vram_size = RREG32(R600_CONFIG_MEMSIZE); + rdev->mc.mc_vram_size = rdev->mc.real_vram_size; /* Could aper size report 0 ? */ rdev->mc.aper_base = drm_get_resource_start(rdev->ddev, 0); diff --git a/drivers/gpu/drm/radeon/radeon.h b/drivers/gpu/drm/radeon/radeon.h index 63a3fe32e58..045b33b3bf2 100644 --- a/drivers/gpu/drm/radeon/radeon.h +++ b/drivers/gpu/drm/radeon/radeon.h @@ -332,8 +332,11 @@ struct radeon_mc { unsigned gtt_location; unsigned gtt_size; unsigned vram_location; - unsigned vram_size; + /* for some chips with <= 32MB we need to lie + * about vram size near mc fb location */ + unsigned mc_vram_size; unsigned vram_width; + unsigned real_vram_size; int vram_mtrr; bool vram_is_ddr; }; diff --git a/drivers/gpu/drm/radeon/radeon_device.c b/drivers/gpu/drm/radeon/radeon_device.c index f78db5c8008..6d1749e4422 100644 --- a/drivers/gpu/drm/radeon/radeon_device.c +++ b/drivers/gpu/drm/radeon/radeon_device.c @@ -121,7 +121,7 @@ int radeon_mc_setup(struct radeon_device *rdev) if (rdev->mc.vram_location != 0xFFFFFFFFUL) { /* vram location was already setup try to put gtt after * if it fits */ - tmp = rdev->mc.vram_location + rdev->mc.vram_size; + tmp = rdev->mc.vram_location + rdev->mc.mc_vram_size; tmp = (tmp + rdev->mc.gtt_size - 1) & ~(rdev->mc.gtt_size - 1); if ((0xFFFFFFFFUL - tmp) >= rdev->mc.gtt_size) { rdev->mc.gtt_location = tmp; @@ -136,13 +136,13 @@ int radeon_mc_setup(struct radeon_device *rdev) } else if (rdev->mc.gtt_location != 0xFFFFFFFFUL) { /* gtt location was already setup try to put vram before * if it fits */ - if (rdev->mc.vram_size < rdev->mc.gtt_location) { + if (rdev->mc.mc_vram_size < rdev->mc.gtt_location) { rdev->mc.vram_location = 0; } else { tmp = rdev->mc.gtt_location + rdev->mc.gtt_size; - tmp += (rdev->mc.vram_size - 1); - tmp &= ~(rdev->mc.vram_size - 1); - if ((0xFFFFFFFFUL - tmp) >= rdev->mc.vram_size) { + tmp += (rdev->mc.mc_vram_size - 1); + tmp &= ~(rdev->mc.mc_vram_size - 1); + if ((0xFFFFFFFFUL - tmp) >= rdev->mc.mc_vram_size) { rdev->mc.vram_location = tmp; } else { printk(KERN_ERR "[drm] vram too big to fit " @@ -152,12 +152,14 @@ int radeon_mc_setup(struct radeon_device *rdev) } } else { rdev->mc.vram_location = 0; - rdev->mc.gtt_location = rdev->mc.vram_size; + rdev->mc.gtt_location = rdev->mc.mc_vram_size; } - DRM_INFO("radeon: VRAM %uM\n", rdev->mc.vram_size >> 20); + DRM_INFO("radeon: VRAM %uM\n", rdev->mc.real_vram_size >> 20); DRM_INFO("radeon: VRAM from 0x%08X to 0x%08X\n", rdev->mc.vram_location, - rdev->mc.vram_location + rdev->mc.vram_size - 1); + rdev->mc.vram_location + rdev->mc.mc_vram_size - 1); + if (rdev->mc.real_vram_size != rdev->mc.mc_vram_size) + DRM_INFO("radeon: VRAM less than aperture workaround enabled\n"); DRM_INFO("radeon: GTT %uM\n", rdev->mc.gtt_size >> 20); DRM_INFO("radeon: GTT from 0x%08X to 0x%08X\n", rdev->mc.gtt_location, @@ -573,7 +575,7 @@ int radeon_device_init(struct radeon_device *rdev, rdev->mc.vram_mtrr = mtrr_add(rdev->mc.aper_base, rdev->mc.aper_size, MTRR_TYPE_WRCOMB, 1); DRM_INFO("Detected VRAM RAM=%uM, BAR=%uM\n", - rdev->mc.vram_size >> 20, + rdev->mc.real_vram_size >> 20, (unsigned)rdev->mc.aper_size >> 20); DRM_INFO("RAM width %dbits %cDR\n", rdev->mc.vram_width, rdev->mc.vram_is_ddr ? 'D' : 'S'); diff --git a/drivers/gpu/drm/radeon/radeon_gem.c b/drivers/gpu/drm/radeon/radeon_gem.c index 12542087b29..cded5180c75 100644 --- a/drivers/gpu/drm/radeon/radeon_gem.c +++ b/drivers/gpu/drm/radeon/radeon_gem.c @@ -157,9 +157,9 @@ int radeon_gem_info_ioctl(struct drm_device *dev, void *data, struct radeon_device *rdev = dev->dev_private; struct drm_radeon_gem_info *args = data; - args->vram_size = rdev->mc.vram_size; + args->vram_size = rdev->mc.real_vram_size; /* FIXME: report somethings that makes sense */ - args->vram_visible = rdev->mc.vram_size - (4 * 1024 * 1024); + args->vram_visible = rdev->mc.real_vram_size - (4 * 1024 * 1024); args->gart_size = rdev->mc.gtt_size; return 0; } diff --git a/drivers/gpu/drm/radeon/radeon_ttm.c b/drivers/gpu/drm/radeon/radeon_ttm.c index f3469b96208..15c3531377e 100644 --- a/drivers/gpu/drm/radeon/radeon_ttm.c +++ b/drivers/gpu/drm/radeon/radeon_ttm.c @@ -454,7 +454,7 @@ int radeon_ttm_init(struct radeon_device *rdev) return r; } r = ttm_bo_init_mm(&rdev->mman.bdev, TTM_PL_VRAM, 0, - ((rdev->mc.aper_size) >> PAGE_SHIFT)); + ((rdev->mc.real_vram_size) >> PAGE_SHIFT)); if (r) { DRM_ERROR("Failed initializing VRAM heap.\n"); return r; @@ -471,7 +471,7 @@ int radeon_ttm_init(struct radeon_device *rdev) return r; } DRM_INFO("radeon: %uM of VRAM memory ready\n", - rdev->mc.vram_size / (1024 * 1024)); + rdev->mc.real_vram_size / (1024 * 1024)); r = ttm_bo_init_mm(&rdev->mman.bdev, TTM_PL_TT, 0, ((rdev->mc.gtt_size) >> PAGE_SHIFT)); if (r) { diff --git a/drivers/gpu/drm/radeon/rs400.c b/drivers/gpu/drm/radeon/rs400.c index 96a3c8486d2..b29affd9c5d 100644 --- a/drivers/gpu/drm/radeon/rs400.c +++ b/drivers/gpu/drm/radeon/rs400.c @@ -233,7 +233,7 @@ int rs400_mc_init(struct radeon_device *rdev) rs400_gpu_init(rdev); rs400_gart_disable(rdev); - rdev->mc.gtt_location = rdev->mc.vram_size; + rdev->mc.gtt_location = rdev->mc.mc_vram_size; rdev->mc.gtt_location += (rdev->mc.gtt_size - 1); rdev->mc.gtt_location &= ~(rdev->mc.gtt_size - 1); r = radeon_mc_setup(rdev); @@ -247,7 +247,7 @@ int rs400_mc_init(struct radeon_device *rdev) "programming pipes. Bad things might happen.\n"); } - tmp = rdev->mc.vram_location + rdev->mc.vram_size - 1; + tmp = rdev->mc.vram_location + rdev->mc.mc_vram_size - 1; tmp = REG_SET(RADEON_MC_FB_TOP, tmp >> 16); tmp |= REG_SET(RADEON_MC_FB_START, rdev->mc.vram_location >> 16); WREG32(RADEON_MC_FB_LOCATION, tmp); diff --git a/drivers/gpu/drm/radeon/rs600.c b/drivers/gpu/drm/radeon/rs600.c index bccdce7fd37..bbea6dee4a9 100644 --- a/drivers/gpu/drm/radeon/rs600.c +++ b/drivers/gpu/drm/radeon/rs600.c @@ -223,7 +223,7 @@ int rs600_mc_init(struct radeon_device *rdev) printk(KERN_WARNING "Failed to wait MC idle while " "programming pipes. Bad things might happen.\n"); } - tmp = rdev->mc.vram_location + rdev->mc.vram_size - 1; + tmp = rdev->mc.vram_location + rdev->mc.mc_vram_size - 1; tmp = REG_SET(RS600_MC_FB_TOP, tmp >> 16); tmp |= REG_SET(RS600_MC_FB_START, rdev->mc.vram_location >> 16); WREG32_MC(RS600_MC_FB_LOCATION, tmp); diff --git a/drivers/gpu/drm/radeon/rs690.c b/drivers/gpu/drm/radeon/rs690.c index 97eaee3d28b..839595b0072 100644 --- a/drivers/gpu/drm/radeon/rs690.c +++ b/drivers/gpu/drm/radeon/rs690.c @@ -67,7 +67,7 @@ int rs690_mc_init(struct radeon_device *rdev) rs400_gart_disable(rdev); /* Setup GPU memory space */ - rdev->mc.gtt_location = rdev->mc.vram_size; + rdev->mc.gtt_location = rdev->mc.mc_vram_size; rdev->mc.gtt_location += (rdev->mc.gtt_size - 1); rdev->mc.gtt_location &= ~(rdev->mc.gtt_size - 1); rdev->mc.vram_location = 0xFFFFFFFFUL; @@ -82,7 +82,7 @@ int rs690_mc_init(struct radeon_device *rdev) printk(KERN_WARNING "Failed to wait MC idle while " "programming pipes. Bad things might happen.\n"); } - tmp = rdev->mc.vram_location + rdev->mc.vram_size - 1; + tmp = rdev->mc.vram_location + rdev->mc.mc_vram_size - 1; tmp = REG_SET(RS690_MC_FB_TOP, tmp >> 16); tmp |= REG_SET(RS690_MC_FB_START, rdev->mc.vram_location >> 16); WREG32_MC(RS690_MCCFG_FB_LOCATION, tmp); @@ -228,7 +228,8 @@ void rs690_vram_info(struct radeon_device *rdev) } else { rdev->mc.vram_width = 64; } - rdev->mc.vram_size = RREG32(RADEON_CONFIG_MEMSIZE); + rdev->mc.real_vram_size = RREG32(RADEON_CONFIG_MEMSIZE); + rdev->mc.mc_vram_size = rdev->mc.real_vram_size; rdev->mc.aper_base = drm_get_resource_start(rdev->ddev, 0); rdev->mc.aper_size = drm_get_resource_len(rdev->ddev, 0); diff --git a/drivers/gpu/drm/radeon/rv515.c b/drivers/gpu/drm/radeon/rv515.c index 4fd411893b9..551e608702e 100644 --- a/drivers/gpu/drm/radeon/rv515.c +++ b/drivers/gpu/drm/radeon/rv515.c @@ -100,10 +100,10 @@ int rv515_mc_init(struct radeon_device *rdev) "programming pipes. Bad things might happen.\n"); } /* Write VRAM size in case we are limiting it */ - WREG32(RADEON_CONFIG_MEMSIZE, rdev->mc.vram_size); + WREG32(RADEON_CONFIG_MEMSIZE, rdev->mc.real_vram_size); tmp = REG_SET(MC_FB_START, rdev->mc.vram_location >> 16); WREG32(0x134, tmp); - tmp = rdev->mc.vram_location + rdev->mc.vram_size - 1; + tmp = rdev->mc.vram_location + rdev->mc.mc_vram_size - 1; tmp = REG_SET(MC_FB_TOP, tmp >> 16); tmp |= REG_SET(MC_FB_START, rdev->mc.vram_location >> 16); WREG32_MC(MC_FB_LOCATION, tmp); @@ -369,10 +369,7 @@ void rv515_vram_info(struct radeon_device *rdev) fixed20_12 a; rv515_vram_get_type(rdev); - rdev->mc.vram_size = RREG32(CONFIG_MEMSIZE); - rdev->mc.aper_base = drm_get_resource_start(rdev->ddev, 0); - rdev->mc.aper_size = drm_get_resource_len(rdev->ddev, 0); /* FIXME: we should enforce default clock in case GPU is not in * default setup */ diff --git a/drivers/gpu/drm/radeon/rv770.c b/drivers/gpu/drm/radeon/rv770.c index da50cc51ede..21d8ffd5730 100644 --- a/drivers/gpu/drm/radeon/rv770.c +++ b/drivers/gpu/drm/radeon/rv770.c @@ -67,7 +67,7 @@ int rv770_mc_init(struct radeon_device *rdev) "programming pipes. Bad things might happen.\n"); } - tmp = rdev->mc.vram_location + rdev->mc.vram_size - 1; + tmp = rdev->mc.vram_location + rdev->mc.mc_vram_size - 1; tmp = REG_SET(R700_MC_FB_TOP, tmp >> 24); tmp |= REG_SET(R700_MC_FB_BASE, rdev->mc.vram_location >> 24); WREG32(R700_MC_VM_FB_LOCATION, tmp); -- cgit v1.2.3 From 4677f15c60421d48566c48c3149474e64977f071 Mon Sep 17 00:00:00 2001 From: Thomas Hellstrom Date: Tue, 21 Jul 2009 17:45:13 +0200 Subject: drm/ttm: Fix an oops and sync object leak. The code was potentially dereferencig a NULL sync object pointer. At the same time a sync object reference was potentially leaked. Signed-off-by: Thomas Hellstrom Signed-off-by: Dave Airlie --- drivers/gpu/drm/ttm/ttm_bo_util.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) diff --git a/drivers/gpu/drm/ttm/ttm_bo_util.c b/drivers/gpu/drm/ttm/ttm_bo_util.c index bdec583901e..3e5d0c4ad85 100644 --- a/drivers/gpu/drm/ttm/ttm_bo_util.c +++ b/drivers/gpu/drm/ttm/ttm_bo_util.c @@ -509,8 +509,8 @@ int ttm_bo_move_accel_cleanup(struct ttm_buffer_object *bo, if (evict) { ret = ttm_bo_wait(bo, false, false, false); spin_unlock(&bo->lock); - driver->sync_obj_unref(&bo->sync_obj); - + if (tmp_obj) + driver->sync_obj_unref(&tmp_obj); if (ret) return ret; @@ -532,6 +532,8 @@ int ttm_bo_move_accel_cleanup(struct ttm_buffer_object *bo, set_bit(TTM_BO_PRIV_FLAG_MOVING, &bo->priv_flags); spin_unlock(&bo->lock); + if (tmp_obj) + driver->sync_obj_unref(&tmp_obj); ret = ttm_buffer_object_transfer(bo, &ghost_obj); if (ret) -- cgit v1.2.3 From 542c6f6df51327dbb180cf4d9b34827e147efe17 Mon Sep 17 00:00:00 2001 From: Thomas Hellstrom Date: Fri, 24 Jul 2009 09:57:34 +0200 Subject: drm/ttm: Fix ttm in-kernel copying of pages with non-standard caching attributes. For x86 this affected highmem pages only, since they were always kmapped cache-coherent, and this is fixed using kmap_atomic_prot(). For other architectures that may not modify the linear kernel map we resort to vmap() for now, since kmap_atomic_prot() generally uses the linear kernel map for lowmem pages. This of course comes with a performance impact and should be optimized when possible. Signed-off-by: Thomas Hellstrom Signed-off-by: Dave Airlie --- drivers/gpu/drm/ttm/ttm_bo_util.c | 63 ++++++++++++++++++++++++++++++++------- 1 file changed, 52 insertions(+), 11 deletions(-) diff --git a/drivers/gpu/drm/ttm/ttm_bo_util.c b/drivers/gpu/drm/ttm/ttm_bo_util.c index 3e5d0c4ad85..ce2e6f38ea0 100644 --- a/drivers/gpu/drm/ttm/ttm_bo_util.c +++ b/drivers/gpu/drm/ttm/ttm_bo_util.c @@ -136,7 +136,8 @@ static int ttm_copy_io_page(void *dst, void *src, unsigned long page) } static int ttm_copy_io_ttm_page(struct ttm_tt *ttm, void *src, - unsigned long page) + unsigned long page, + pgprot_t prot) { struct page *d = ttm_tt_get_page(ttm, page); void *dst; @@ -145,17 +146,35 @@ static int ttm_copy_io_ttm_page(struct ttm_tt *ttm, void *src, return -ENOMEM; src = (void *)((unsigned long)src + (page << PAGE_SHIFT)); - dst = kmap(d); + +#ifdef CONFIG_X86 + dst = kmap_atomic_prot(d, KM_USER0, prot); +#else + if (prot != PAGE_KERNEL) + dst = vmap(&d, 1, 0, prot); + else + dst = kmap(d); +#endif if (!dst) return -ENOMEM; memcpy_fromio(dst, src, PAGE_SIZE); - kunmap(d); + +#ifdef CONFIG_X86 + kunmap_atomic(dst, KM_USER0); +#else + if (prot != PAGE_KERNEL) + vunmap(dst); + else + kunmap(d); +#endif + return 0; } static int ttm_copy_ttm_io_page(struct ttm_tt *ttm, void *dst, - unsigned long page) + unsigned long page, + pgprot_t prot) { struct page *s = ttm_tt_get_page(ttm, page); void *src; @@ -164,12 +183,28 @@ static int ttm_copy_ttm_io_page(struct ttm_tt *ttm, void *dst, return -ENOMEM; dst = (void *)((unsigned long)dst + (page << PAGE_SHIFT)); - src = kmap(s); +#ifdef CONFIG_X86 + src = kmap_atomic_prot(s, KM_USER0, prot); +#else + if (prot != PAGE_KERNEL) + src = vmap(&s, 1, 0, prot); + else + src = kmap(s); +#endif if (!src) return -ENOMEM; memcpy_toio(dst, src, PAGE_SIZE); - kunmap(s); + +#ifdef CONFIG_X86 + kunmap_atomic(src, KM_USER0); +#else + if (prot != PAGE_KERNEL) + vunmap(src); + else + kunmap(s); +#endif + return 0; } @@ -214,11 +249,17 @@ int ttm_bo_move_memcpy(struct ttm_buffer_object *bo, for (i = 0; i < new_mem->num_pages; ++i) { page = i * dir + add; - if (old_iomap == NULL) - ret = ttm_copy_ttm_io_page(ttm, new_iomap, page); - else if (new_iomap == NULL) - ret = ttm_copy_io_ttm_page(ttm, old_iomap, page); - else + if (old_iomap == NULL) { + pgprot_t prot = ttm_io_prot(old_mem->placement, + PAGE_KERNEL); + ret = ttm_copy_ttm_io_page(ttm, new_iomap, page, + prot); + } else if (new_iomap == NULL) { + pgprot_t prot = ttm_io_prot(new_mem->placement, + PAGE_KERNEL); + ret = ttm_copy_io_ttm_page(ttm, old_iomap, page, + prot); + } else ret = ttm_copy_io_page(new_iomap, old_iomap, page); if (ret) goto out1; -- cgit v1.2.3 From 73ba651fc246fcc3e446da4155e0425b4219d2c4 Mon Sep 17 00:00:00 2001 From: Thomas Hellstrom Date: Fri, 24 Jul 2009 09:57:33 +0200 Subject: x86: Export kmap_atomic_prot() needed for TTM. This functionality is needed to kmap_atomic() highmem pages that may potentially have or are about to set up other mappings with non-standard caching attributes. Signed-off-by: Thomas Hellstrom Signed-off-by: Dave Airlie --- arch/x86/mm/highmem_32.c | 1 + 1 file changed, 1 insertion(+) diff --git a/arch/x86/mm/highmem_32.c b/arch/x86/mm/highmem_32.c index 58f621e8191..2112ed55e7e 100644 --- a/arch/x86/mm/highmem_32.c +++ b/arch/x86/mm/highmem_32.c @@ -103,6 +103,7 @@ EXPORT_SYMBOL(kmap); EXPORT_SYMBOL(kunmap); EXPORT_SYMBOL(kmap_atomic); EXPORT_SYMBOL(kunmap_atomic); +EXPORT_SYMBOL(kmap_atomic_prot); void __init set_highmem_pages_init(void) { -- cgit v1.2.3 From f121ecfebbea1452a17d57c656def7d1537440f7 Mon Sep 17 00:00:00 2001 From: Thomas Hellstrom Date: Fri, 24 Jul 2009 10:22:36 +0200 Subject: drm/ttm: powerpc: Fix Highmem cache flushing. Temporarily maps highmem pages while flushing to get a valid virtual address to flush. Signed-off-by: Thomas Hellstrom Signed-off-by: Dave Airlie --- drivers/gpu/drm/ttm/ttm_tt.c | 14 ++++++++++---- 1 file changed, 10 insertions(+), 4 deletions(-) diff --git a/drivers/gpu/drm/ttm/ttm_tt.c b/drivers/gpu/drm/ttm/ttm_tt.c index 81ab81f030a..9b2248a80cf 100644 --- a/drivers/gpu/drm/ttm/ttm_tt.c +++ b/drivers/gpu/drm/ttm/ttm_tt.c @@ -86,10 +86,16 @@ void ttm_tt_cache_flush(struct page *pages[], unsigned long num_pages) unsigned long i; for (i = 0; i < num_pages; ++i) { - if (pages[i]) { - unsigned long start = (unsigned long)page_address(pages[i]); - flush_dcache_range(start, start + PAGE_SIZE); - } + struct page *page = pages[i]; + void *page_virtual; + + if (unlikely(page == NULL)) + continue; + + page_virtual = kmap_atomic(page, KM_USER0); + flush_dcache_range((unsigned long) page_virtual, + (unsigned long) page_virtual + PAGE_SIZE); + kunmap_atomic(page_virtual, KM_USER0); } #else if (on_each_cpu(ttm_tt_ipi_handler, NULL, 1) != 0) -- cgit v1.2.3 From 3b170c3b2e688665fbc2845ba5bb4304bf38a119 Mon Sep 17 00:00:00 2001 From: Dave Airlie Date: Fri, 24 Jul 2009 13:47:45 +1000 Subject: drm/radeon/kms: allow interruptible waits for objects. Blocking here isn't something the X server mouse appreciates, avoid the block and let userspace retry the waits. libdrm_radeon userspace library is also expecting EBUSY not ERESTART Signed-off-by: Dave Airlie --- drivers/gpu/drm/radeon/radeon_fence.c | 2 +- drivers/gpu/drm/radeon/radeon_object.c | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/gpu/drm/radeon/radeon_fence.c b/drivers/gpu/drm/radeon/radeon_fence.c index 96afbf5ae2a..b4e48dd2e85 100644 --- a/drivers/gpu/drm/radeon/radeon_fence.c +++ b/drivers/gpu/drm/radeon/radeon_fence.c @@ -195,7 +195,7 @@ retry: r = wait_event_interruptible_timeout(rdev->fence_drv.queue, radeon_fence_signaled(fence), timeout); if (unlikely(r == -ERESTARTSYS)) { - return -ERESTART; + return -EBUSY; } } else { r = wait_event_timeout(rdev->fence_drv.queue, diff --git a/drivers/gpu/drm/radeon/radeon_object.c b/drivers/gpu/drm/radeon/radeon_object.c index 81573c3a9b4..dd9ac2fed6d 100644 --- a/drivers/gpu/drm/radeon/radeon_object.c +++ b/drivers/gpu/drm/radeon/radeon_object.c @@ -309,7 +309,7 @@ int radeon_object_wait(struct radeon_object *robj) } spin_lock(&robj->tobj.lock); if (robj->tobj.sync_obj) { - r = ttm_bo_wait(&robj->tobj, true, false, false); + r = ttm_bo_wait(&robj->tobj, true, true, false); } spin_unlock(&robj->tobj.lock); radeon_object_unreserve(robj); -- cgit v1.2.3 From ecc0b32645bf19a3a240e72be3022ab3b46ad3d0 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Michel=20D=C3=A4nzer?= Date: Tue, 21 Jul 2009 11:23:57 +0200 Subject: drm/radeon: Add radeon.test parameter for running BO GPU copy tests. MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit If enabled, during initialization BO GTT->VRAM and VRAM->GTT GPU copies are tested across the whole GTT aperture. This has helped uncover the benchmark copy size bug and verify the maximum aperture size supported by the AGP bridge in my PowerBook. Signed-off-by: Michel Dänzer Signed-off-by: Dave Airlie --- drivers/gpu/drm/radeon/Makefile | 3 +- drivers/gpu/drm/radeon/radeon.h | 7 ++ drivers/gpu/drm/radeon/radeon_device.c | 3 + drivers/gpu/drm/radeon/radeon_drv.c | 4 + drivers/gpu/drm/radeon/radeon_test.c | 209 +++++++++++++++++++++++++++++++++ 5 files changed, 225 insertions(+), 1 deletion(-) create mode 100644 drivers/gpu/drm/radeon/radeon_test.c diff --git a/drivers/gpu/drm/radeon/Makefile b/drivers/gpu/drm/radeon/Makefile index 5fae1e074b4..013d3805994 100644 --- a/drivers/gpu/drm/radeon/Makefile +++ b/drivers/gpu/drm/radeon/Makefile @@ -13,7 +13,8 @@ radeon-$(CONFIG_DRM_RADEON_KMS) += radeon_device.o radeon_kms.o \ radeon_encoders.o radeon_display.o radeon_cursor.o radeon_i2c.o \ radeon_clocks.o radeon_fb.o radeon_gem.o radeon_ring.o radeon_irq_kms.o \ radeon_cs.o radeon_bios.o radeon_benchmark.o r100.o r300.o r420.o \ - rs400.o rs600.o rs690.o rv515.o r520.o r600.o rs780.o rv770.o + rs400.o rs600.o rs690.o rv515.o r520.o r600.o rs780.o rv770.o \ + radeon_test.o radeon-$(CONFIG_COMPAT) += radeon_ioc32.o diff --git a/drivers/gpu/drm/radeon/radeon.h b/drivers/gpu/drm/radeon/radeon.h index 045b33b3bf2..b1d945b8ed6 100644 --- a/drivers/gpu/drm/radeon/radeon.h +++ b/drivers/gpu/drm/radeon/radeon.h @@ -64,6 +64,7 @@ extern int radeon_agpmode; extern int radeon_vram_limit; extern int radeon_gart_size; extern int radeon_benchmarking; +extern int radeon_testing; extern int radeon_connector_table; /* @@ -534,6 +535,12 @@ struct radeon_pm { void radeon_benchmark(struct radeon_device *rdev); +/* + * Testing + */ +void radeon_test_moves(struct radeon_device *rdev); + + /* * Debugfs */ diff --git a/drivers/gpu/drm/radeon/radeon_device.c b/drivers/gpu/drm/radeon/radeon_device.c index 6d1749e4422..a162ade74b7 100644 --- a/drivers/gpu/drm/radeon/radeon_device.c +++ b/drivers/gpu/drm/radeon/radeon_device.c @@ -638,6 +638,9 @@ int radeon_device_init(struct radeon_device *rdev, if (!ret) { DRM_INFO("radeon: kernel modesetting successfully initialized.\n"); } + if (radeon_testing) { + radeon_test_moves(rdev); + } if (radeon_benchmarking) { radeon_benchmark(rdev); } diff --git a/drivers/gpu/drm/radeon/radeon_drv.c b/drivers/gpu/drm/radeon/radeon_drv.c index 84ba69f4878..3cfcee17dc5 100644 --- a/drivers/gpu/drm/radeon/radeon_drv.c +++ b/drivers/gpu/drm/radeon/radeon_drv.c @@ -89,6 +89,7 @@ int radeon_agpmode = 0; int radeon_vram_limit = 0; int radeon_gart_size = 512; /* default gart size */ int radeon_benchmarking = 0; +int radeon_testing = 0; int radeon_connector_table = 0; #endif @@ -117,6 +118,9 @@ module_param_named(gartsize, radeon_gart_size, int, 0600); MODULE_PARM_DESC(benchmark, "Run benchmark"); module_param_named(benchmark, radeon_benchmarking, int, 0444); +MODULE_PARM_DESC(test, "Run tests"); +module_param_named(test, radeon_testing, int, 0444); + MODULE_PARM_DESC(connector_table, "Force connector table"); module_param_named(connector_table, radeon_connector_table, int, 0444); #endif diff --git a/drivers/gpu/drm/radeon/radeon_test.c b/drivers/gpu/drm/radeon/radeon_test.c new file mode 100644 index 00000000000..03c33cf4e14 --- /dev/null +++ b/drivers/gpu/drm/radeon/radeon_test.c @@ -0,0 +1,209 @@ +/* + * Copyright 2009 VMware, Inc. + * + * Permission is hereby granted, free of charge, to any person obtaining a + * copy of this software and associated documentation files (the "Software"), + * to deal in the Software without restriction, including without limitation + * the rights to use, copy, modify, merge, publish, distribute, sublicense, + * and/or sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL + * THE COPYRIGHT HOLDER(S) OR AUTHOR(S) BE LIABLE FOR ANY CLAIM, DAMAGES OR + * OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, + * ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + * + * Authors: Michel Dänzer + */ +#include +#include +#include "radeon_reg.h" +#include "radeon.h" + + +/* Test BO GTT->VRAM and VRAM->GTT GPU copies across the whole GTT aperture */ +void radeon_test_moves(struct radeon_device *rdev) +{ + struct radeon_object *vram_obj = NULL; + struct radeon_object **gtt_obj = NULL; + struct radeon_fence *fence = NULL; + uint64_t gtt_addr, vram_addr; + unsigned i, n, size; + int r; + + size = 1024 * 1024; + + /* Number of tests = + * (Total GTT - IB pool - writeback page - ring buffer) / test size + */ + n = (rdev->mc.gtt_size - RADEON_IB_POOL_SIZE*64*1024 - 4096 - + rdev->cp.ring_size) / size; + + gtt_obj = kzalloc(n * sizeof(*gtt_obj), GFP_KERNEL); + if (!gtt_obj) { + DRM_ERROR("Failed to allocate %d pointers\n", n); + r = 1; + goto out_cleanup; + } + + r = radeon_object_create(rdev, NULL, size, true, RADEON_GEM_DOMAIN_VRAM, + false, &vram_obj); + if (r) { + DRM_ERROR("Failed to create VRAM object\n"); + goto out_cleanup; + } + + r = radeon_object_pin(vram_obj, RADEON_GEM_DOMAIN_VRAM, &vram_addr); + if (r) { + DRM_ERROR("Failed to pin VRAM object\n"); + goto out_cleanup; + } + + for (i = 0; i < n; i++) { + void *gtt_map, *vram_map; + void **gtt_start, **gtt_end; + void **vram_start, **vram_end; + + r = radeon_object_create(rdev, NULL, size, true, + RADEON_GEM_DOMAIN_GTT, false, gtt_obj + i); + if (r) { + DRM_ERROR("Failed to create GTT object %d\n", i); + goto out_cleanup; + } + + r = radeon_object_pin(gtt_obj[i], RADEON_GEM_DOMAIN_GTT, >t_addr); + if (r) { + DRM_ERROR("Failed to pin GTT object %d\n", i); + goto out_cleanup; + } + + r = radeon_object_kmap(gtt_obj[i], >t_map); + if (r) { + DRM_ERROR("Failed to map GTT object %d\n", i); + goto out_cleanup; + } + + for (gtt_start = gtt_map, gtt_end = gtt_map + size; + gtt_start < gtt_end; + gtt_start++) + *gtt_start = gtt_start; + + radeon_object_kunmap(gtt_obj[i]); + + r = radeon_fence_create(rdev, &fence); + if (r) { + DRM_ERROR("Failed to create GTT->VRAM fence %d\n", i); + goto out_cleanup; + } + + r = radeon_copy(rdev, gtt_addr, vram_addr, size / 4096, fence); + if (r) { + DRM_ERROR("Failed GTT->VRAM copy %d\n", i); + goto out_cleanup; + } + + r = radeon_fence_wait(fence, false); + if (r) { + DRM_ERROR("Failed to wait for GTT->VRAM fence %d\n", i); + goto out_cleanup; + } + + radeon_fence_unref(&fence); + + r = radeon_object_kmap(vram_obj, &vram_map); + if (r) { + DRM_ERROR("Failed to map VRAM object after copy %d\n", i); + goto out_cleanup; + } + + for (gtt_start = gtt_map, gtt_end = gtt_map + size, + vram_start = vram_map, vram_end = vram_map + size; + vram_start < vram_end; + gtt_start++, vram_start++) { + if (*vram_start != gtt_start) { + DRM_ERROR("Incorrect GTT->VRAM copy %d: Got 0x%p, " + "expected 0x%p (GTT map 0x%p-0x%p)\n", + i, *vram_start, gtt_start, gtt_map, + gtt_end); + radeon_object_kunmap(vram_obj); + goto out_cleanup; + } + *vram_start = vram_start; + } + + radeon_object_kunmap(vram_obj); + + r = radeon_fence_create(rdev, &fence); + if (r) { + DRM_ERROR("Failed to create VRAM->GTT fence %d\n", i); + goto out_cleanup; + } + + r = radeon_copy(rdev, vram_addr, gtt_addr, size / 4096, fence); + if (r) { + DRM_ERROR("Failed VRAM->GTT copy %d\n", i); + goto out_cleanup; + } + + r = radeon_fence_wait(fence, false); + if (r) { + DRM_ERROR("Failed to wait for VRAM->GTT fence %d\n", i); + goto out_cleanup; + } + + radeon_fence_unref(&fence); + + r = radeon_object_kmap(gtt_obj[i], >t_map); + if (r) { + DRM_ERROR("Failed to map GTT object after copy %d\n", i); + goto out_cleanup; + } + + for (gtt_start = gtt_map, gtt_end = gtt_map + size, + vram_start = vram_map, vram_end = vram_map + size; + gtt_start < gtt_end; + gtt_start++, vram_start++) { + if (*gtt_start != vram_start) { + DRM_ERROR("Incorrect VRAM->GTT copy %d: Got 0x%p, " + "expected 0x%p (VRAM map 0x%p-0x%p)\n", + i, *gtt_start, vram_start, vram_map, + vram_end); + radeon_object_kunmap(gtt_obj[i]); + goto out_cleanup; + } + } + + radeon_object_kunmap(gtt_obj[i]); + + DRM_INFO("Tested GTT->VRAM and VRAM->GTT copy for GTT offset 0x%llx\n", + gtt_addr - rdev->mc.gtt_location); + } + +out_cleanup: + if (vram_obj) { + radeon_object_unpin(vram_obj); + radeon_object_unref(&vram_obj); + } + if (gtt_obj) { + for (i = 0; i < n; i++) { + if (gtt_obj[i]) { + radeon_object_unpin(gtt_obj[i]); + radeon_object_unref(>t_obj[i]); + } + } + kfree(gtt_obj); + } + if (fence) { + radeon_fence_unref(&fence); + } + if (r) { + printk(KERN_WARNING "Error while testing BO move.\n"); + } +} + -- cgit v1.2.3 From ea3c13bd8c2ed1d3670bd72e60f562a427355fdf Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Michel=20D=C3=A4nzer?= Date: Mon, 20 Jul 2009 01:44:03 +0200 Subject: drm/radeon: Fix size used for benchmarking BO copies. MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit The incorrect size caused benchmark results to be inflated by a factor of 4. Signed-off-by: Michel Dänzer Signed-off-by: Dave Airlie --- drivers/gpu/drm/radeon/radeon_benchmark.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/gpu/drm/radeon/radeon_benchmark.c b/drivers/gpu/drm/radeon/radeon_benchmark.c index c44403a2ca7..2e938f7496f 100644 --- a/drivers/gpu/drm/radeon/radeon_benchmark.c +++ b/drivers/gpu/drm/radeon/radeon_benchmark.c @@ -63,7 +63,7 @@ void radeon_benchmark_move(struct radeon_device *rdev, unsigned bsize, if (r) { goto out_cleanup; } - r = radeon_copy_dma(rdev, saddr, daddr, size >> 14, fence); + r = radeon_copy_dma(rdev, saddr, daddr, size / 4096, fence); if (r) { goto out_cleanup; } @@ -88,7 +88,7 @@ void radeon_benchmark_move(struct radeon_device *rdev, unsigned bsize, if (r) { goto out_cleanup; } - r = radeon_copy_blit(rdev, saddr, daddr, size >> 14, fence); + r = radeon_copy_blit(rdev, saddr, daddr, size / 4096, fence); if (r) { goto out_cleanup; } -- cgit v1.2.3 From b42db2b12df7b4f7b2ace581a7726cb5bcb2d658 Mon Sep 17 00:00:00 2001 From: Dave Airlie Date: Wed, 29 Jul 2009 16:56:52 +1000 Subject: drm/ttm: fix highuser vs dma32 confusion. DMA32 and highmem are sort of exclusive. Noticed by AndrewR on #radeon. Signed-off-by: Dave Airlie --- drivers/gpu/drm/ttm/ttm_tt.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/drivers/gpu/drm/ttm/ttm_tt.c b/drivers/gpu/drm/ttm/ttm_tt.c index 9b2248a80cf..b8b6c4a5f98 100644 --- a/drivers/gpu/drm/ttm/ttm_tt.c +++ b/drivers/gpu/drm/ttm/ttm_tt.c @@ -137,13 +137,15 @@ static void ttm_tt_free_page_directory(struct ttm_tt *ttm) static struct page *ttm_tt_alloc_page(unsigned page_flags) { - gfp_t gfp_flags = GFP_HIGHUSER; + gfp_t gfp_flags = GFP_USER; if (page_flags & TTM_PAGE_FLAG_ZERO_ALLOC) gfp_flags |= __GFP_ZERO; if (page_flags & TTM_PAGE_FLAG_DMA32) gfp_flags |= __GFP_DMA32; + else + gfp_flags |= __GFP_HIGHMEM; return alloc_page(gfp_flags); } -- cgit v1.2.3 From ed8f0d9e708a1a7c9222e7d0a35d97521e904223 Mon Sep 17 00:00:00 2001 From: Dave Airlie Date: Wed, 29 Jul 2009 17:07:38 +1000 Subject: drm/radeon: set fb aperture sizes for framebuffer handoff. This will allow efi/vesa to handoff to radeon. Signed-off-by: Dave Airlie --- drivers/gpu/drm/radeon/radeon_fb.c | 5 +++++ 1 file changed, 5 insertions(+) diff --git a/drivers/gpu/drm/radeon/radeon_fb.c b/drivers/gpu/drm/radeon/radeon_fb.c index 36d2f5588f2..3206c0ad7b6 100644 --- a/drivers/gpu/drm/radeon/radeon_fb.c +++ b/drivers/gpu/drm/radeon/radeon_fb.c @@ -602,6 +602,11 @@ int radeonfb_create(struct radeon_device *rdev, info->var.width = -1; info->var.xres = fb_width; info->var.yres = fb_height; + + /* setup aperture base/size for vesafb takeover */ + info->aperture_base = rdev->ddev->mode_config.fb_base; + info->aperture_size = rdev->mc.real_vram_size; + info->fix.mmio_start = 0; info->fix.mmio_len = 0; info->pixmap.size = 64*1024; -- cgit v1.2.3 From 78735cffc2d9ab0dec32f1ba7cbc1d84b45bbf29 Mon Sep 17 00:00:00 2001 From: Roel Kluin Date: Wed, 29 Jul 2009 14:35:20 +0200 Subject: ALSA: hda: fix out-of-bound hdmi_eld.sad[] write e->sad[] is declared with size ELD_MAX_SAD=16, but the guard allows range 0-31. Signed-off-by: Roel Kluin Signed-off-by: Wu Fengguang Signed-off-by: Takashi Iwai --- sound/pci/hda/hda_eld.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/sound/pci/hda/hda_eld.c b/sound/pci/hda/hda_eld.c index fcad5ec3177..9446a5abea1 100644 --- a/sound/pci/hda/hda_eld.c +++ b/sound/pci/hda/hda_eld.c @@ -508,7 +508,7 @@ static void hdmi_write_eld_info(struct snd_info_entry *entry, char name[64]; char *sname; long long val; - int n; + unsigned int n; while (!snd_info_get_line(buffer, line, sizeof(line))) { if (sscanf(line, "%s %llx", name, &val) != 2) @@ -539,7 +539,7 @@ static void hdmi_write_eld_info(struct snd_info_entry *entry, sname++; n = 10 * n + name[4] - '0'; } - if (n < 0 || n > 31) /* double the CEA limit */ + if (n >= ELD_MAX_SAD) continue; if (!strcmp(sname, "_coding_type")) e->sad[n].format = val; -- cgit v1.2.3 From c45ec06c74512265969aef40b00f320c6afb7a90 Mon Sep 17 00:00:00 2001 From: Roel Kluin Date: Wed, 29 Jul 2009 11:46:59 +0200 Subject: sound: aedsp16: Buffer overflow DSPVersion is declared as char[3], but the sprintf writes at least 4 bytes including terminating null. Signed-off-by: Roel Kluin Signed-off-by: Takashi Iwai --- sound/oss/aedsp16.c | 9 +++++---- 1 file changed, 5 insertions(+), 4 deletions(-) diff --git a/sound/oss/aedsp16.c b/sound/oss/aedsp16.c index 3ee9900ffd7..35b5912cf3f 100644 --- a/sound/oss/aedsp16.c +++ b/sound/oss/aedsp16.c @@ -325,8 +325,9 @@ /* * Size of character arrays that store name and version of sound card */ -#define CARDNAMELEN 15 /* Size of the card's name in chars */ -#define CARDVERLEN 2 /* Size of the card's version in chars */ +#define CARDNAMELEN 15 /* Size of the card's name in chars */ +#define CARDVERLEN 10 /* Size of the card's version in chars */ +#define CARDVERDIGITS 2 /* Number of digits in the version */ #if defined(CONFIG_SC6600) /* @@ -410,7 +411,7 @@ static int soft_cfg __initdata = 0; /* bitmapped config */ static int soft_cfg_mss __initdata = 0; /* bitmapped mss config */ -static int ver[CARDVERLEN] __initdata = {0, 0}; /* DSP Ver: +static int ver[CARDVERDIGITS] __initdata = {0, 0}; /* DSP Ver: hi->ver[0] lo->ver[1] */ #if defined(CONFIG_SC6600) @@ -957,7 +958,7 @@ static int __init aedsp16_dsp_version(int port) * string is finished. */ ver[len++] = ret; - } while (len < CARDVERLEN); + } while (len < CARDVERDIGITS); sprintf(DSPVersion, "%d.%d", ver[0], ver[1]); DBG(("success.\n")); -- cgit v1.2.3 From a987004fbcf163b100d227284999602f83044d7e Mon Sep 17 00:00:00 2001 From: Roel Kluin Date: Wed, 29 Jul 2009 12:12:09 +0200 Subject: sound: mpu401.c: Buffer overflow mpu_synth_info[m].name is a char[30], and the minimum length of the data written by sprintf is 31 bytes including terminating null. Signed-off-by: Roel Kluin Signed-off-by: Takashi Iwai --- sound/oss/mpu401.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/sound/oss/mpu401.c b/sound/oss/mpu401.c index 1b2316f35b1..734b8f9e2f7 100644 --- a/sound/oss/mpu401.c +++ b/sound/oss/mpu401.c @@ -1074,7 +1074,7 @@ int attach_mpu401(struct address_info *hw_config, struct module *owner) sprintf(mpu_synth_info[m].name, "%s (MPU401)", hw_config->name); else sprintf(mpu_synth_info[m].name, - "MPU-401 %d.%d%c Midi interface #%d", + "MPU-401 %d.%d%c MIDI #%d", (int) (devc->version & 0xf0) >> 4, devc->version & 0x0f, revision_char, -- cgit v1.2.3 From ec79be26875f6c1468784876cb99192b7f41c7a5 Mon Sep 17 00:00:00 2001 From: Bartlomiej Zolnierkiewicz Date: Wed, 29 Jul 2009 21:07:47 +0200 Subject: PM / ACPI: HP G7000 Notebook needs a SCI_EN resume quirk This fixes regression (battery "vanishing" on resume) introduced by commit d0c71fe7ebc180f1b7bc7da1d39a07fc19eec768 ("ACPI Suspend: Enable ACPI during resume if SCI_EN is not set") and also the issue with the "screaming" IRQ 9. Fixes http://bugzilla.kernel.org/show_bug.cgi?id=13745 Reported-and-tested-by: Alan Jenkins Cc: stable@kernel.org Signed-off-by: Bartlomiej Zolnierkiewicz Acked-by: Len Brown Signed-off-by: Rafael J. Wysocki --- drivers/acpi/sleep.c | 8 ++++++++ 1 file changed, 8 insertions(+) diff --git a/drivers/acpi/sleep.c b/drivers/acpi/sleep.c index 01574a06653..42159a28f43 100644 --- a/drivers/acpi/sleep.c +++ b/drivers/acpi/sleep.c @@ -397,6 +397,14 @@ static struct dmi_system_id __initdata acpisleep_dmi_table[] = { }, }, { + .callback = init_set_sci_en_on_resume, + .ident = "Hewlett-Packard HP G7000 Notebook PC", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "Hewlett-Packard"), + DMI_MATCH(DMI_PRODUCT_NAME, "HP G7000 Notebook PC"), + }, + }, + { .callback = init_old_suspend_ordering, .ident = "Panasonic CF51-2L", .matches = { -- cgit v1.2.3 From dddac6a7b445de95515f64fdf82fe5dc36c02f26 Mon Sep 17 00:00:00 2001 From: Alan Jenkins Date: Wed, 29 Jul 2009 21:07:55 +0200 Subject: PM / Hibernate: Replace bdget call with simple atomic_inc of i_count Create bdgrab(). This function copies an existing reference to a block_device. It is safe to call from any context. Hibernation code wishes to copy a reference to the active swap device. Right now it calls bdget() under a spinlock, but this is wrong because bdget() can sleep. It doesn't need a full bdget() because we already hold a reference to active swap devices (and the spinlock protects against swapoff). Fixes http://bugzilla.kernel.org/show_bug.cgi?id=13827 Signed-off-by: Alan Jenkins Signed-off-by: Rafael J. Wysocki --- fs/block_dev.c | 10 ++++++++++ include/linux/fs.h | 1 + mm/swapfile.c | 4 ++-- 3 files changed, 13 insertions(+), 2 deletions(-) diff --git a/fs/block_dev.c b/fs/block_dev.c index 3a6d4fb2a32..94dfda24c06 100644 --- a/fs/block_dev.c +++ b/fs/block_dev.c @@ -564,6 +564,16 @@ struct block_device *bdget(dev_t dev) EXPORT_SYMBOL(bdget); +/** + * bdgrab -- Grab a reference to an already referenced block device + * @bdev: Block device to grab a reference to. + */ +struct block_device *bdgrab(struct block_device *bdev) +{ + atomic_inc(&bdev->bd_inode->i_count); + return bdev; +} + long nr_blockdev_pages(void) { struct block_device *bdev; diff --git a/include/linux/fs.h b/include/linux/fs.h index 0872372184f..a36ffa5a77a 100644 --- a/include/linux/fs.h +++ b/include/linux/fs.h @@ -1946,6 +1946,7 @@ extern void putname(const char *name); extern int register_blkdev(unsigned int, const char *); extern void unregister_blkdev(unsigned int, const char *); extern struct block_device *bdget(dev_t); +extern struct block_device *bdgrab(struct block_device *bdev); extern void bd_set_size(struct block_device *, loff_t size); extern void bd_forget(struct inode *inode); extern void bdput(struct block_device *); diff --git a/mm/swapfile.c b/mm/swapfile.c index d1ade1a48ee..8ffdc0d23c5 100644 --- a/mm/swapfile.c +++ b/mm/swapfile.c @@ -753,7 +753,7 @@ int swap_type_of(dev_t device, sector_t offset, struct block_device **bdev_p) if (!bdev) { if (bdev_p) - *bdev_p = bdget(sis->bdev->bd_dev); + *bdev_p = bdgrab(sis->bdev); spin_unlock(&swap_lock); return i; @@ -765,7 +765,7 @@ int swap_type_of(dev_t device, sector_t offset, struct block_device **bdev_p) struct swap_extent, list); if (se->start_block == offset) { if (bdev_p) - *bdev_p = bdget(sis->bdev->bd_dev); + *bdev_p = bdgrab(sis->bdev); spin_unlock(&swap_lock); bdput(bdev); -- cgit v1.2.3 From e043e42bdb66885b3ac10d27a01ccb9972e2b0a3 Mon Sep 17 00:00:00 2001 From: OGAWA Hirofumi Date: Wed, 29 Jul 2009 12:15:56 -0700 Subject: pty: avoid forcing 'low_latency' tty flag We really don't want to mark the pty as a low-latency device, because as Alan points out, the ->write method can be called from an IRQ (ppp?), and that means we can't use ->low_latency=1 as we take mutexes in the low_latency case. So rather than using low_latency to force the written data to be pushed to the ldisc handling at 'write()' time, just make the reader side (or the poll function) do the flush when it checks whether there is data to be had. This also fixes the problem with lost data in an emacs compile buffer (bugzilla 13815), and we can thus revert the low_latency pty hack (commit 3a54297478e6578f96fd54bf4daa1751130aca86: "pty: quickfix for the pty ENXIO timing problems"). Signed-off-by: OGAWA Hirofumi Tested-by: Aneesh Kumar K.V [ Modified to do the tty_flush_to_ldisc() inside input_available_p() so that it triggers for both read and poll() - Linus] Signed-off-by: Linus Torvalds --- drivers/char/n_tty.c | 1 + drivers/char/pty.c | 2 -- drivers/char/tty_buffer.c | 13 +++++++++++++ include/linux/tty.h | 1 + 4 files changed, 15 insertions(+), 2 deletions(-) diff --git a/drivers/char/n_tty.c b/drivers/char/n_tty.c index ff47907ff1b..973be2f4419 100644 --- a/drivers/char/n_tty.c +++ b/drivers/char/n_tty.c @@ -1583,6 +1583,7 @@ static int n_tty_open(struct tty_struct *tty) static inline int input_available_p(struct tty_struct *tty, int amt) { + tty_flush_to_ldisc(tty); if (tty->icanon) { if (tty->canon_data) return 1; diff --git a/drivers/char/pty.c b/drivers/char/pty.c index 3850a68f265..6e6942c45f5 100644 --- a/drivers/char/pty.c +++ b/drivers/char/pty.c @@ -52,7 +52,6 @@ static void pty_close(struct tty_struct *tty, struct file *filp) return; tty->link->packet = 0; set_bit(TTY_OTHER_CLOSED, &tty->link->flags); - tty_flip_buffer_push(tty->link); wake_up_interruptible(&tty->link->read_wait); wake_up_interruptible(&tty->link->write_wait); if (tty->driver->subtype == PTY_TYPE_MASTER) { @@ -208,7 +207,6 @@ static int pty_open(struct tty_struct *tty, struct file *filp) clear_bit(TTY_OTHER_CLOSED, &tty->link->flags); set_bit(TTY_THROTTLED, &tty->flags); retval = 0; - tty->low_latency = 1; out: return retval; } diff --git a/drivers/char/tty_buffer.c b/drivers/char/tty_buffer.c index 810ee25d66a..3108991c5c8 100644 --- a/drivers/char/tty_buffer.c +++ b/drivers/char/tty_buffer.c @@ -461,6 +461,19 @@ static void flush_to_ldisc(struct work_struct *work) tty_ldisc_deref(disc); } +/** + * tty_flush_to_ldisc + * @tty: tty to push + * + * Push the terminal flip buffers to the line discipline. + * + * Must not be called from IRQ context. + */ +void tty_flush_to_ldisc(struct tty_struct *tty) +{ + flush_to_ldisc(&tty->buf.work.work); +} + /** * tty_flip_buffer_push - terminal * @tty: tty to push diff --git a/include/linux/tty.h b/include/linux/tty.h index 1488d8c81aa..e8c6c9136c9 100644 --- a/include/linux/tty.h +++ b/include/linux/tty.h @@ -394,6 +394,7 @@ extern void __do_SAK(struct tty_struct *tty); extern void disassociate_ctty(int priv); extern void no_tty(void); extern void tty_flip_buffer_push(struct tty_struct *tty); +extern void tty_flush_to_ldisc(struct tty_struct *tty); extern void tty_buffer_free_all(struct tty_struct *tty); extern void tty_buffer_flush(struct tty_struct *tty); extern void tty_buffer_init(struct tty_struct *tty); -- cgit v1.2.3 From f5886c7f96f2542382d3a983c5f13e03d7fc5259 Mon Sep 17 00:00:00 2001 From: Catalin Marinas Date: Wed, 29 Jul 2009 16:26:57 +0100 Subject: kmemleak: Protect the seq start/next/stop sequence by rcu_read_lock() Objects passed to kmemleak_seq_next() have an incremented reference count (hence not freed) but they may point via object_list.next to other freed objects. To avoid this, the whole start/next/stop sequence must be protected by rcu_read_lock(). Signed-off-by: Catalin Marinas Signed-off-by: Linus Torvalds --- mm/kmemleak.c | 4 +--- 1 file changed, 1 insertion(+), 3 deletions(-) diff --git a/mm/kmemleak.c b/mm/kmemleak.c index 5aabd41ffb8..487267310a8 100644 --- a/mm/kmemleak.c +++ b/mm/kmemleak.c @@ -1217,7 +1217,6 @@ static void *kmemleak_seq_start(struct seq_file *seq, loff_t *pos) } object = NULL; out: - rcu_read_unlock(); return object; } @@ -1233,13 +1232,11 @@ static void *kmemleak_seq_next(struct seq_file *seq, void *v, loff_t *pos) ++(*pos); - rcu_read_lock(); list_for_each_continue_rcu(n, &object_list) { next_obj = list_entry(n, struct kmemleak_object, object_list); if (get_object(next_obj)) break; } - rcu_read_unlock(); put_object(prev_obj); return next_obj; @@ -1255,6 +1252,7 @@ static void kmemleak_seq_stop(struct seq_file *seq, void *v) * kmemleak_seq_start may return ERR_PTR if the scan_mutex * waiting was interrupted, so only release it if !IS_ERR. */ + rcu_read_unlock(); mutex_unlock(&scan_mutex); if (v) put_object(v); -- cgit v1.2.3 From 0c997c0eaac8c68fa23719617484dae29bddaedd Mon Sep 17 00:00:00 2001 From: Lars-Peter Clausen Date: Wed, 22 Jul 2009 00:33:06 +0200 Subject: S3C24XX: GPIO: Fix pin range check in s3c_gpiolib_getchip In the s3c_gpiolib_getchip implementation for s3c24xx the check whether a pin is in the gpio banks range is reversed. Thus the function returns NULL for valid pins and the gpio chip if its not valid. As a result gpio states are not saved/restored properly during suspend/resume. Signed-off-by: Ben Dooks --- arch/arm/mach-s3c2410/include/mach/gpio-core.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm/mach-s3c2410/include/mach/gpio-core.h b/arch/arm/mach-s3c2410/include/mach/gpio-core.h index 8fe192081d3..f8b879a7973 100644 --- a/arch/arm/mach-s3c2410/include/mach/gpio-core.h +++ b/arch/arm/mach-s3c2410/include/mach/gpio-core.h @@ -28,7 +28,7 @@ static inline struct s3c_gpio_chip *s3c_gpiolib_getchip(unsigned int pin) return NULL; chip = &s3c24xx_gpios[pin/32]; - return (S3C2410_GPIO_OFFSET(pin) > chip->chip.ngpio) ? chip : NULL; + return (S3C2410_GPIO_OFFSET(pin) < chip->chip.ngpio) ? chip : NULL; } #endif /* __ASM_ARCH_GPIO_CORE_H */ -- cgit v1.2.3 From 1d91e1a296244690461a7c36d71710dfbabbc219 Mon Sep 17 00:00:00 2001 From: Mark Brown Date: Wed, 15 Jul 2009 13:03:34 +0100 Subject: S3C64XX: Fix get_rate() for ARMCLK If the requested clock is faster than the parent clock then the parent clock is the closest we can get to the request so we need to return that instead of the requested clock. Signed-off-by: Mark Brown Signed-off-by: Ben Dooks --- arch/arm/plat-s3c64xx/s3c6400-clock.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm/plat-s3c64xx/s3c6400-clock.c b/arch/arm/plat-s3c64xx/s3c6400-clock.c index 1debc1f9f98..f8165e62247 100644 --- a/arch/arm/plat-s3c64xx/s3c6400-clock.c +++ b/arch/arm/plat-s3c64xx/s3c6400-clock.c @@ -153,7 +153,7 @@ static unsigned long s3c64xx_clk_arm_round_rate(struct clk *clk, u32 div; if (parent < rate) - return rate; + return parent; div = (parent / rate) - 1; if (div > armclk_mask) -- cgit v1.2.3 From 9b71de49b030ad8fd4d13d38571b5c42dc9ed8dd Mon Sep 17 00:00:00 2001 From: Mark Brown Date: Wed, 15 Jul 2009 13:03:35 +0100 Subject: S3C64XX: Fix ARMCLK configuration The value of armclk_mask needs to be inverted for use as a mask on the register value when updating ARM_RATIO. This is critical for cpufreq support, without it attempts to scale the frequency of the core trash pretty much the entire clock tree. Signed-off-by: Mark Brown Signed-off-by: Ben Dooks --- arch/arm/plat-s3c64xx/s3c6400-clock.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm/plat-s3c64xx/s3c6400-clock.c b/arch/arm/plat-s3c64xx/s3c6400-clock.c index f8165e62247..febac1950d8 100644 --- a/arch/arm/plat-s3c64xx/s3c6400-clock.c +++ b/arch/arm/plat-s3c64xx/s3c6400-clock.c @@ -175,7 +175,7 @@ static int s3c64xx_clk_arm_set_rate(struct clk *clk, unsigned long rate) div = clk_get_rate(clk->parent) / rate; val = __raw_readl(S3C_CLK_DIV0); - val &= armclk_mask; + val &= ~armclk_mask; val |= (div - 1); __raw_writel(val, S3C_CLK_DIV0); -- cgit v1.2.3 From 0e014e92ba93d905bcb39881dce2d38807b90c34 Mon Sep 17 00:00:00 2001 From: Peter Korsgaard Date: Fri, 17 Jul 2009 22:33:37 +0200 Subject: i2c-s3c2410: s3c24xx_i2c_init: don't clobber IICLC value s3c24xx_i2c_init() was overwriting the IICLC value set just above in s3c24xx_i2c_clockrate() with zero, effectively disabling the platform line control setting. Signed-off-by: Peter Korsgaard Signed-off-by: Ben Dooks --- drivers/i2c/busses/i2c-s3c2410.c | 5 ----- 1 file changed, 5 deletions(-) diff --git a/drivers/i2c/busses/i2c-s3c2410.c b/drivers/i2c/busses/i2c-s3c2410.c index 8f42a4536cd..20bb0ceb027 100644 --- a/drivers/i2c/busses/i2c-s3c2410.c +++ b/drivers/i2c/busses/i2c-s3c2410.c @@ -763,11 +763,6 @@ static int s3c24xx_i2c_init(struct s3c24xx_i2c *i2c) dev_info(i2c->dev, "bus frequency set to %d KHz\n", freq); dev_dbg(i2c->dev, "S3C2410_IICCON=0x%02lx\n", iicon); - /* check for s3c2440 i2c controller */ - - if (s3c24xx_i2c_is2440(i2c)) - writel(0x0, i2c->regs + S3C2440_IICLC); - return 0; } -- cgit v1.2.3 From 783fd6fa4c144e3f6913e6fed89de10a6dd715a5 Mon Sep 17 00:00:00 2001 From: Roel Kluin Date: Fri, 17 Jul 2009 15:24:00 +0200 Subject: i2c: strncpy does not null terminate string strlcpy() will always null terminate the string. Signed-off-by: Roel Kluin Signed-off-by: Ben Dooks --- drivers/i2c/busses/i2c-omap.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/i2c/busses/i2c-omap.c b/drivers/i2c/busses/i2c-omap.c index fdd83277c8a..f2b82ee39ad 100644 --- a/drivers/i2c/busses/i2c-omap.c +++ b/drivers/i2c/busses/i2c-omap.c @@ -879,7 +879,7 @@ omap_i2c_probe(struct platform_device *pdev) i2c_set_adapdata(adap, dev); adap->owner = THIS_MODULE; adap->class = I2C_CLASS_HWMON; - strncpy(adap->name, "OMAP I2C adapter", sizeof(adap->name)); + strlcpy(adap->name, "OMAP I2C adapter", sizeof(adap->name)); adap->algo = &omap_i2c_algo; adap->dev.parent = &pdev->dev; -- cgit v1.2.3 From ccb3bc16b4891a82649d4bccbeefe60b1d9a62e2 Mon Sep 17 00:00:00 2001 From: Magnus Damm Date: Wed, 22 Jul 2009 23:58:39 +0900 Subject: i2c-sh_mobile: change module_init() to subsys_initcall() Convert the i2c-sh_mobile i2c bus driver to use subsys_initcall() instead of module_init(). This change makes the driver register a bit earlier which together with earlier platform data moves the time for probe(). The earlier probe() makes it possible to use i2c_get_adapter() and i2c_transfer() from device_initcall(). The same strategy is used by other i2c bus drivers such as i2c-pxa.c and i2c-s3c2410.c. Signed-off-by: Magnus Damm [ben-linux@fluff.org: minor subject updaye] Signed-off-by: Ben Dooks --- drivers/i2c/busses/i2c-sh_mobile.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/i2c/busses/i2c-sh_mobile.c b/drivers/i2c/busses/i2c-sh_mobile.c index 4f3d99cd169..820487d0d5c 100644 --- a/drivers/i2c/busses/i2c-sh_mobile.c +++ b/drivers/i2c/busses/i2c-sh_mobile.c @@ -637,7 +637,7 @@ static void __exit sh_mobile_i2c_adap_exit(void) platform_driver_unregister(&sh_mobile_i2c_driver); } -module_init(sh_mobile_i2c_adap_init); +subsys_initcall(sh_mobile_i2c_adap_init); module_exit(sh_mobile_i2c_adap_exit); MODULE_DESCRIPTION("SuperH Mobile I2C Bus Controller driver"); -- cgit v1.2.3 From bfb6b6588af5ff762222cee79152d2be738ccc06 Mon Sep 17 00:00:00 2001 From: "Sonasath, Moiz" Date: Tue, 21 Jul 2009 10:14:06 -0500 Subject: i2c-omap: Bug in reading the RXSTAT/TXSTAT values from the I2C_BUFFSTAT register Fix bug in reading the I2C_BUFFSTAT register for getting byte count on RX/TX interrupt. On Interrupt: I2C_STAT[RDR], read 'RXSTAT' from I2C_BUFFSTAT[8-13] On Interrupt: I2C_STAT[XDR] read 'TXSTAT' from I2C_BUFFSTAT[0-5] Signed-off-by: Jagadeesh Pakaravoor Signed-off-by: Moiz Sonasath Signed-off-by: Vikram pandita [ben-linux@fluff.org: fixed mail format and added i2c-omap to subject] Signed-off-by: Ben Dooks --- drivers/i2c/busses/i2c-omap.c | 12 +++++++----- 1 file changed, 7 insertions(+), 5 deletions(-) diff --git a/drivers/i2c/busses/i2c-omap.c b/drivers/i2c/busses/i2c-omap.c index f2b82ee39ad..a6966578851 100644 --- a/drivers/i2c/busses/i2c-omap.c +++ b/drivers/i2c/busses/i2c-omap.c @@ -692,9 +692,10 @@ omap_i2c_isr(int this_irq, void *dev_id) if (dev->fifo_size) { if (stat & OMAP_I2C_STAT_RRDY) num_bytes = dev->fifo_size; - else - num_bytes = omap_i2c_read_reg(dev, - OMAP_I2C_BUFSTAT_REG); + else /* read RXSTAT on RDR interrupt */ + num_bytes = (omap_i2c_read_reg(dev, + OMAP_I2C_BUFSTAT_REG) + >> 8) & 0x3F; } while (num_bytes) { num_bytes--; @@ -731,9 +732,10 @@ omap_i2c_isr(int this_irq, void *dev_id) if (dev->fifo_size) { if (stat & OMAP_I2C_STAT_XRDY) num_bytes = dev->fifo_size; - else + else /* read TXSTAT on XDR interrupt */ num_bytes = omap_i2c_read_reg(dev, - OMAP_I2C_BUFSTAT_REG); + OMAP_I2C_BUFSTAT_REG) + & 0x3F; } while (num_bytes) { num_bytes--; -- cgit v1.2.3 From 04c688dd7a65935568b44629bfaa122eddf76e94 Mon Sep 17 00:00:00 2001 From: "Sonasath, Moiz" Date: Tue, 21 Jul 2009 10:14:40 -0500 Subject: i2c-omap: In case of a NACK|ARDY|AL return from the ISR In case of a NACK or ARDY or AL interrupt, complete the request. There is no need to service the RRDY/RDR or XRDY/XDR interrupts. Refer TRM SWPU114: Figure 18-31.I2C Master Transmitter Mode, Interrupt Method, in F/S and HS Modes http://focus.ti.com/pdfs/wtbu/SWPU114T_PrelimFinalEPDF_06_25_2009.pdf Signed-off-by: Moiz Sonasath Signed-off-by: Vikram pandita [ben-linux@fluff.org: fixed mail format and added i2c-omap to subject] Signed-off-by: Ben Dooks --- drivers/i2c/busses/i2c-omap.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/drivers/i2c/busses/i2c-omap.c b/drivers/i2c/busses/i2c-omap.c index a6966578851..5c508ccf438 100644 --- a/drivers/i2c/busses/i2c-omap.c +++ b/drivers/i2c/busses/i2c-omap.c @@ -685,8 +685,10 @@ omap_i2c_isr(int this_irq, void *dev_id) err |= OMAP_I2C_STAT_AL; } if (stat & (OMAP_I2C_STAT_ARDY | OMAP_I2C_STAT_NACK | - OMAP_I2C_STAT_AL)) + OMAP_I2C_STAT_AL)) { omap_i2c_complete_cmd(dev, err); + return IRQ_HANDLED; + } if (stat & (OMAP_I2C_STAT_RRDY | OMAP_I2C_STAT_RDR)) { u8 num_bytes = 1; if (dev->fifo_size) { -- cgit v1.2.3 From cd086d3aa6f7f7bf4d4e1f9fa09af0f0b6bb99ec Mon Sep 17 00:00:00 2001 From: "Sonasath, Moiz" Date: Tue, 21 Jul 2009 10:15:12 -0500 Subject: i2c-omap: OMAP3430 Silicon Errata 1.153 When an XRDY/XDR is hit, wait for XUDF before writing data to DATA_REG. Otherwise some data bytes can be lost while transferring them from the memory to the I2C interface. Do a Busy-wait for XUDF, before writing data to DATA_REG. While waiting if there is NACK | AL, set the appropriate error flags, ack the pending interrupts and return from the ISR. Signed-off-by: Moiz Sonasath Signed-off-by: Vikram pandita [ben-linux@fluff.org: fixed mail format and added i2c-omap to subject] Signed-off-by: Ben Dooks --- drivers/i2c/busses/i2c-omap.c | 24 +++++++++++++++++++++++- 1 file changed, 23 insertions(+), 1 deletion(-) diff --git a/drivers/i2c/busses/i2c-omap.c b/drivers/i2c/busses/i2c-omap.c index 5c508ccf438..d258b02aef4 100644 --- a/drivers/i2c/busses/i2c-omap.c +++ b/drivers/i2c/busses/i2c-omap.c @@ -672,9 +672,10 @@ omap_i2c_isr(int this_irq, void *dev_id) break; } + err = 0; +complete: omap_i2c_write_reg(dev, OMAP_I2C_STAT_REG, stat); - err = 0; if (stat & OMAP_I2C_STAT_NACK) { err |= OMAP_I2C_STAT_NACK; omap_i2c_write_reg(dev, OMAP_I2C_CON_REG, @@ -764,6 +765,27 @@ omap_i2c_isr(int this_irq, void *dev_id) "data to send\n"); break; } + + /* + * OMAP3430 Errata 1.153: When an XRDY/XDR + * is hit, wait for XUDF before writing data + * to DATA_REG. Otherwise some data bytes can + * be lost while transferring them from the + * memory to the I2C interface. + */ + + if (cpu_is_omap34xx()) { + while (!(stat & OMAP_I2C_STAT_XUDF)) { + if (stat & (OMAP_I2C_STAT_NACK | OMAP_I2C_STAT_AL)) { + omap_i2c_ack_stat(dev, stat & (OMAP_I2C_STAT_XRDY | OMAP_I2C_STAT_XDR)); + err |= OMAP_I2C_STAT_XUDF; + goto complete; + } + cpu_relax(); + stat = omap_i2c_read_reg(dev, OMAP_I2C_STAT_REG); + } + } + omap_i2c_write_reg(dev, OMAP_I2C_DATA_REG, w); } omap_i2c_ack_stat(dev, -- cgit v1.2.3 From 51fbb4bab6c8710eb897ab3fb06efbbc921f3a8d Mon Sep 17 00:00:00 2001 From: Matthew Wilcox Date: Wed, 29 Jul 2009 15:02:03 -0700 Subject: markup_oops: fix it with 32-bit userspace on a 64-bit kernel A 32-bit perl can't handle 64-bit addresses without using the BigInt package. Signed-off-by: Matthew Wilcox Acked-by: Arjan van de Ven Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- scripts/markup_oops.pl | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) diff --git a/scripts/markup_oops.pl b/scripts/markup_oops.pl index 528492bcba5..89774011965 100644 --- a/scripts/markup_oops.pl +++ b/scripts/markup_oops.pl @@ -1,6 +1,7 @@ #!/usr/bin/perl use File::Basename; +use Math::BigInt; # Copyright 2008, Intel Corporation # @@ -172,8 +173,8 @@ while () { parse_x86_regs($line); } -my $decodestart = hex($target) - hex($func_offset); -my $decodestop = hex($target) + 8192; +my $decodestart = Math::BigInt->from_hex("0x$target") - Math::BigInt->from_hex("0x$func_offset"); +my $decodestop = Math::BigInt->from_hex("0x$target") + 8192; if ($target eq "0") { print "No oops found!\n"; print "Usage: \n"; -- cgit v1.2.3 From e084b2d95e48b31aa45f9c49ffc6cdae8bdb21d4 Mon Sep 17 00:00:00 2001 From: Mel Gorman Date: Wed, 29 Jul 2009 15:02:04 -0700 Subject: page-allocator: preserve PFN ordering when __GFP_COLD is set Fix a post-2.6.24 performace regression caused by 3dfa5721f12c3d5a441448086bee156887daa961 ("page-allocator: preserve PFN ordering when __GFP_COLD is set"). Narayanan reports "The regression is around 15%. There is no disk controller as our setup is based on Samsung OneNAND used as a memory mapped device on a OMAP2430 based board." The page allocator tries to preserve contiguous PFN ordering when returning pages such that repeated callers to the allocator have a strong chance of getting physically contiguous pages, particularly when external fragmentation is low. However, of the bulk of the allocations have __GFP_COLD set as they are due to aio_read() for example, then the PFNs are in reverse PFN order. This can cause performance degration when used with IO controllers that could have merged the requests. This patch attempts to preserve the contiguous ordering of PFNs for users of __GFP_COLD. Signed-off-by: Mel Gorman Reported-by: Narayananu Gopalakrishnan Tested-by: Narayanan Gopalakrishnan Cc: KAMEZAWA Hiroyuki Cc: Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- mm/page_alloc.c | 13 +++++++++---- 1 file changed, 9 insertions(+), 4 deletions(-) diff --git a/mm/page_alloc.c b/mm/page_alloc.c index caa92689aac..ae28c22a7fd 100644 --- a/mm/page_alloc.c +++ b/mm/page_alloc.c @@ -882,7 +882,7 @@ retry_reserve: */ static int rmqueue_bulk(struct zone *zone, unsigned int order, unsigned long count, struct list_head *list, - int migratetype) + int migratetype, int cold) { int i; @@ -901,7 +901,10 @@ static int rmqueue_bulk(struct zone *zone, unsigned int order, * merge IO requests if the physical pages are ordered * properly. */ - list_add(&page->lru, list); + if (likely(cold == 0)) + list_add(&page->lru, list); + else + list_add_tail(&page->lru, list); set_page_private(page, migratetype); list = &page->lru; } @@ -1119,7 +1122,8 @@ again: local_irq_save(flags); if (!pcp->count) { pcp->count = rmqueue_bulk(zone, 0, - pcp->batch, &pcp->list, migratetype); + pcp->batch, &pcp->list, + migratetype, cold); if (unlikely(!pcp->count)) goto failed; } @@ -1138,7 +1142,8 @@ again: /* Allocate more to the pcp list if necessary */ if (unlikely(&page->lru == &pcp->list)) { pcp->count += rmqueue_bulk(zone, 0, - pcp->batch, &pcp->list, migratetype); + pcp->batch, &pcp->list, + migratetype, cold); page = list_entry(pcp->list.next, struct page, lru); } -- cgit v1.2.3 From 6583bb64fc370842b32a87c67750c26f6d559af0 Mon Sep 17 00:00:00 2001 From: David Rientjes Date: Wed, 29 Jul 2009 15:02:06 -0700 Subject: mm: avoid endless looping for oom killed tasks If a task is oom killed and still cannot find memory when trying with no watermarks, it's better to fail the allocation attempt than to loop endlessly. Direct reclaim has already failed and the oom killer will be a no-op since current has yet to die, so there is no other alternative for allocations that are not __GFP_NOFAIL. Acked-by: Mel Gorman Signed-off-by: David Rientjes Acked-by: Hugh Dickins Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- mm/page_alloc.c | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/mm/page_alloc.c b/mm/page_alloc.c index ae28c22a7fd..2dbb2fc6883 100644 --- a/mm/page_alloc.c +++ b/mm/page_alloc.c @@ -1794,6 +1794,10 @@ rebalance: if (p->flags & PF_MEMALLOC) goto nopage; + /* Avoid allocations with no watermarks from looping endlessly */ + if (test_thread_flag(TIF_MEMDIE) && !(gfp_mask & __GFP_NOFAIL)) + goto nopage; + /* Try direct reclaim and then allocating */ page = __alloc_pages_direct_reclaim(gfp_mask, order, zonelist, high_zoneidx, -- cgit v1.2.3 From 933b787b57ca8bdc0fc8fb2cbf67b5e6d21beb84 Mon Sep 17 00:00:00 2001 From: Rik van Riel Date: Wed, 29 Jul 2009 15:02:07 -0700 Subject: mm: copy over oom_adj value at fork time Fix a post-2.6.31 regression which was introduced by 2ff05b2b4eac2e63d345fc731ea151a060247f53 ("oom: move oom_adj value from task_struct to mm_struct"). After moving the oom_adj value from the task struct to the mm_struct, the oom_adj value was no longer properly inherited by child processes. Copying over the oom_adj value at fork time fixes that bug. [kosaki.motohiro@jp.fujitsu.com: test for current->mm before dereferencing it] Signed-off-by: Rik van Riel Reported-by: Paul Menage Cc: KOSAKI Motohiro Acked-by: David Rientjes Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- kernel/fork.c | 1 + 1 file changed, 1 insertion(+) diff --git a/kernel/fork.c b/kernel/fork.c index 9b42695f0d1..29b532e718f 100644 --- a/kernel/fork.c +++ b/kernel/fork.c @@ -426,6 +426,7 @@ static struct mm_struct * mm_init(struct mm_struct * mm, struct task_struct *p) init_rwsem(&mm->mmap_sem); INIT_LIST_HEAD(&mm->mmlist); mm->flags = (current->mm) ? current->mm->flags : default_dump_filter; + mm->oom_adj = (current->mm) ? current->mm->oom_adj : 0; mm->core_state = NULL; mm->nr_ptes = 0; set_mm_counter(mm, file_rss, 0); -- cgit v1.2.3 From 11c7da4b0ca76a57f51c996c883c480e203cf5a9 Mon Sep 17 00:00:00 2001 From: Hidetoshi Seto Date: Wed, 29 Jul 2009 15:02:08 -0700 Subject: kexec: fix omitting offset in extended crashkernel syntax Setting "crashkernel=512M-2G:64M,2G-:128M" does not work but it turns to work if it has a trailing-whitespace, like "crashkernel=512M-2G:64M,2G-:128M ". It was because of a bug in the parser, running over the cmdline. This patch adds a check of the termination. Reported-by: Jin Dongming Signed-off-by: Hidetoshi Seto Tested-by: Jin Dongming Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- kernel/kexec.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/kernel/kexec.c b/kernel/kexec.c index ae1c35201cc..f336e2107f9 100644 --- a/kernel/kexec.c +++ b/kernel/kexec.c @@ -1228,7 +1228,7 @@ static int __init parse_crashkernel_mem(char *cmdline, } while (*cur++ == ','); if (*crash_size > 0) { - while (*cur != ' ' && *cur != '@') + while (*cur && *cur != ' ' && *cur != '@') cur++; if (*cur == '@') { cur++; -- cgit v1.2.3 From 3d768213a6c34a27fac1804143da8cf18b8b175f Mon Sep 17 00:00:00 2001 From: Lu Zhihe Date: Wed, 29 Jul 2009 15:02:09 -0700 Subject: edac: x38 fix mchbar high register addr Intel X38 MCHBAR is a 64bits register, base from 0x48, so its higher base is 0x4C. Signed-off-by: Lu Zhihe Signed-off-by: Doug Thompson Cc: [2.6.30.x] Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/edac/x38_edac.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/edac/x38_edac.c b/drivers/edac/x38_edac.c index 2406c2ce284..d4ec6059317 100644 --- a/drivers/edac/x38_edac.c +++ b/drivers/edac/x38_edac.c @@ -30,7 +30,7 @@ /* Intel X38 register addresses - device 0 function 0 - DRAM Controller */ #define X38_MCHBAR_LOW 0x48 /* MCH Memory Mapped Register BAR */ -#define X38_MCHBAR_HIGH 0x4b +#define X38_MCHBAR_HIGH 0x4c #define X38_MCHBAR_MASK 0xfffffc000ULL /* bits 35:14 */ #define X38_MMR_WINDOW_SIZE 16384 -- cgit v1.2.3 From c42b110caeb128819104d057acdaa1ae564b7c8d Mon Sep 17 00:00:00 2001 From: Pawel Osciak Date: Wed, 29 Jul 2009 15:02:10 -0700 Subject: s3c-fb: fix off-by-one bug in loop indexes Fixed off-by-one bug in loop indexes - some elements beyond windows' array were accessed, which might result in memory access violations when removing/suspending the device. Signed-off-by: Pawel Osciak Reviewed-by: Kyungmin Park Signed-off-by: Marek Szyprowski Cc: Krzysztof Helt Cc: Ben Dooks Cc: Russell King Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/video/s3c-fb.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/video/s3c-fb.c b/drivers/video/s3c-fb.c index bb63c07e13d..5a72083dc67 100644 --- a/drivers/video/s3c-fb.c +++ b/drivers/video/s3c-fb.c @@ -964,7 +964,7 @@ static int __devexit s3c_fb_remove(struct platform_device *pdev) struct s3c_fb *sfb = platform_get_drvdata(pdev); int win; - for (win = 0; win <= S3C_FB_MAX_WIN; win++) + for (win = 0; win < S3C_FB_MAX_WIN; win++) if (sfb->windows[win]) s3c_fb_release_win(sfb, sfb->windows[win]); @@ -988,7 +988,7 @@ static int s3c_fb_suspend(struct platform_device *pdev, pm_message_t state) struct s3c_fb_win *win; int win_no; - for (win_no = S3C_FB_MAX_WIN; win_no >= 0; win_no--) { + for (win_no = S3C_FB_MAX_WIN - 1; win_no >= 0; win_no--) { win = sfb->windows[win_no]; if (!win) continue; -- cgit v1.2.3 From ddb22195cb3dc5175ba3aac5e957d0e34cd2ee73 Mon Sep 17 00:00:00 2001 From: Jouni Hogander Date: Wed, 29 Jul 2009 15:02:11 -0700 Subject: spi: omap2_mcspi supports wake events Currently mcspi wake-ups are not enabled. This might cause cases where OMAP is not waking up on mcspi events. Signed-off-by: Jouni Hogander Signed-off-by: Tony Lindgren Signed-off-by: David Brownell Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/spi/omap2_mcspi.c | 11 +++++++++-- 1 file changed, 9 insertions(+), 2 deletions(-) diff --git a/drivers/spi/omap2_mcspi.c b/drivers/spi/omap2_mcspi.c index eee4b6e0af2..2b64091b0f1 100644 --- a/drivers/spi/omap2_mcspi.c +++ b/drivers/spi/omap2_mcspi.c @@ -59,6 +59,8 @@ /* per-register bitmasks: */ +#define OMAP2_MCSPI_SYSCONFIG_SMARTIDLE (2 << 3) +#define OMAP2_MCSPI_SYSCONFIG_ENAWAKEUP (1 << 2) #define OMAP2_MCSPI_SYSCONFIG_AUTOIDLE (1 << 0) #define OMAP2_MCSPI_SYSCONFIG_SOFTRESET (1 << 1) @@ -90,6 +92,7 @@ #define OMAP2_MCSPI_CHCTRL_EN (1 << 0) +#define OMAP2_MCSPI_WAKEUPENABLE_WKEN (1 << 0) /* We have 2 DMA channels per CS, one for RX and one for TX */ struct omap2_mcspi_dma { @@ -873,8 +876,12 @@ static int __init omap2_mcspi_reset(struct omap2_mcspi *mcspi) } while (!(tmp & OMAP2_MCSPI_SYSSTATUS_RESETDONE)); mcspi_write_reg(master, OMAP2_MCSPI_SYSCONFIG, - /* (3 << 8) | (2 << 3) | */ - OMAP2_MCSPI_SYSCONFIG_AUTOIDLE); + OMAP2_MCSPI_SYSCONFIG_AUTOIDLE | + OMAP2_MCSPI_SYSCONFIG_ENAWAKEUP | + OMAP2_MCSPI_SYSCONFIG_SMARTIDLE); + + mcspi_write_reg(master, OMAP2_MCSPI_WAKEUPENABLE, + OMAP2_MCSPI_WAKEUPENABLE_WKEN); omap2_mcspi_set_master_mode(master); -- cgit v1.2.3 From 57c5c28dbc835c67a9c23912bab56b7f165e7715 Mon Sep 17 00:00:00 2001 From: Eero Nurkkala Date: Wed, 29 Jul 2009 15:02:12 -0700 Subject: spi: omap2_mcspi rxdma bugfix When data is read through DMA, the last element must be read separately through the RX register. It cannot be transferred by the DMA. For further details see e.g. OMAP35x TRM (table 19-16). Without the fix the driver causes extra clocks to be clocked to the bus after DMA RX operations. This can cause interesting behaviour with some devices. Signed-off-by: Juuso Oikarinen Signed-off-by: Eero Nurkkala [aaro.koskinen@nokia.com: Simplified the patch while keeping the idea.] Signed-off-by: Aaro Koskinen Signed-off-by: David Brownell Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/spi/omap2_mcspi.c | 21 ++++++++++++++++++++- 1 file changed, 20 insertions(+), 1 deletion(-) diff --git a/drivers/spi/omap2_mcspi.c b/drivers/spi/omap2_mcspi.c index 2b64091b0f1..9b80ad36dbb 100644 --- a/drivers/spi/omap2_mcspi.c +++ b/drivers/spi/omap2_mcspi.c @@ -272,7 +272,7 @@ omap2_mcspi_txrx_dma(struct spi_device *spi, struct spi_transfer *xfer) if (rx != NULL) { omap_set_dma_transfer_params(mcspi_dma->dma_rx_channel, - data_type, element_count, 1, + data_type, element_count - 1, 1, OMAP_DMA_SYNC_ELEMENT, mcspi_dma->dma_rx_sync_dev, 1); @@ -303,6 +303,25 @@ omap2_mcspi_txrx_dma(struct spi_device *spi, struct spi_transfer *xfer) if (rx != NULL) { wait_for_completion(&mcspi_dma->dma_rx_completion); dma_unmap_single(NULL, xfer->rx_dma, count, DMA_FROM_DEVICE); + omap2_mcspi_set_enable(spi, 0); + if (likely(mcspi_read_cs_reg(spi, OMAP2_MCSPI_CHSTAT0) + & OMAP2_MCSPI_CHSTAT_RXS)) { + u32 w; + + w = mcspi_read_cs_reg(spi, OMAP2_MCSPI_RX0); + if (word_len <= 8) + ((u8 *)xfer->rx_buf)[element_count - 1] = w; + else if (word_len <= 16) + ((u16 *)xfer->rx_buf)[element_count - 1] = w; + else /* word_len <= 32 */ + ((u32 *)xfer->rx_buf)[element_count - 1] = w; + } else { + dev_err(&spi->dev, "DMA RX last word empty"); + count -= (word_len <= 8) ? 1 : + (word_len <= 16) ? 2 : + /* word_len <= 32 */ 4; + } + omap2_mcspi_set_enable(spi, 1); } return count; } -- cgit v1.2.3 From 659098141d02eb8e3545be8969d262e02d2f3f98 Mon Sep 17 00:00:00 2001 From: Thadeu Lima de Souza Cascardo Date: Wed, 29 Jul 2009 15:02:13 -0700 Subject: rtc: mark if rtc-cmos drivers were successfully registered rtc-cmos has two drivers, one PNP and one platform. When PNP has not succeeded probing, platform is registered. However, it tries to unregister both drivers unconditionally, instead of only unregistering those that were successfully registered. This causes runtime warnings to be emitted from the driver core code. Fix this with a boolean variable for each driver indicating whether registering was successful. Signed-off-by: Thadeu Lima de Souza Cascardo Cc: David Brownell Cc: Bjorn Helgaas Cc: Alessandro Zummo Cc: Ingo Molnar Cc: David Brownell Cc: Kay Sievers Cc: Greg KH Cc: Ozan Caglayan Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/rtc/rtc-cmos.c | 23 ++++++++++++++++++----- 1 file changed, 18 insertions(+), 5 deletions(-) diff --git a/drivers/rtc/rtc-cmos.c b/drivers/rtc/rtc-cmos.c index 23e10b6263d..f7a4701bf86 100644 --- a/drivers/rtc/rtc-cmos.c +++ b/drivers/rtc/rtc-cmos.c @@ -1174,23 +1174,34 @@ static struct platform_driver cmos_platform_driver = { } }; +#ifdef CONFIG_PNP +static bool pnp_driver_registered; +#endif +static bool platform_driver_registered; + static int __init cmos_init(void) { int retval = 0; #ifdef CONFIG_PNP - pnp_register_driver(&cmos_pnp_driver); + retval = pnp_register_driver(&cmos_pnp_driver); + if (retval == 0) + pnp_driver_registered = true; #endif - if (!cmos_rtc.dev) + if (!cmos_rtc.dev) { retval = platform_driver_probe(&cmos_platform_driver, cmos_platform_probe); + if (retval == 0) + platform_driver_registered = true; + } if (retval == 0) return 0; #ifdef CONFIG_PNP - pnp_unregister_driver(&cmos_pnp_driver); + if (pnp_driver_registered) + pnp_unregister_driver(&cmos_pnp_driver); #endif return retval; } @@ -1199,9 +1210,11 @@ module_init(cmos_init); static void __exit cmos_exit(void) { #ifdef CONFIG_PNP - pnp_unregister_driver(&cmos_pnp_driver); + if (pnp_driver_registered) + pnp_unregister_driver(&cmos_pnp_driver); #endif - platform_driver_unregister(&cmos_platform_driver); + if (platform_driver_registered) + platform_driver_unregister(&cmos_platform_driver); } module_exit(cmos_exit); -- cgit v1.2.3 From e4c6f8bed01f9f9a5c607bd689bf67e7b8a36bd8 Mon Sep 17 00:00:00 2001 From: Eric Sandeen Date: Wed, 29 Jul 2009 15:02:16 -0700 Subject: hugetlbfs: fix i_blocks accounting As reported in Red Hat bz #509671, i_blocks for files on hugetlbfs get accounting wrong when doing something like: $ > foo $ date > foo date: write error: Invalid argument $ /usr/bin/stat foo File: `foo' Size: 0 Blocks: 18446744073709547520 IO Block: 2097152 regular ... This is because hugetlb_unreserve_pages() is unconditionally removing blocks_per_huge_page(h) on each call rather than using the freed amount. If there were 0 blocks, it goes negative, resulting in the above. This is a regression from commit a5516438959d90b071ff0a484ce4f3f523dc3152 ("hugetlb: modular state for hugetlb page size") which did: - inode->i_blocks -= BLOCKS_PER_HUGEPAGE * freed; + inode->i_blocks -= blocks_per_huge_page(h); so just put back the freed multiplier, and it's all happy again. Signed-off-by: Eric Sandeen Acked-by: Andi Kleen Cc: William Lee Irwin III Cc: Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- mm/hugetlb.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/mm/hugetlb.c b/mm/hugetlb.c index d0351e31f47..cafdcee154e 100644 --- a/mm/hugetlb.c +++ b/mm/hugetlb.c @@ -2370,7 +2370,7 @@ void hugetlb_unreserve_pages(struct inode *inode, long offset, long freed) long chg = region_truncate(&inode->i_mapping->private_list, offset); spin_lock(&inode->i_lock); - inode->i_blocks -= blocks_per_huge_page(h); + inode->i_blocks -= (blocks_per_huge_page(h) * freed); spin_unlock(&inode->i_lock); hugetlb_put_quota(inode->i_mapping, (chg - freed)); -- cgit v1.2.3 From 3fc7b4b220c7e830a5b3ce0ea5f85a635e0c50f0 Mon Sep 17 00:00:00 2001 From: Roland Dreier Date: Wed, 29 Jul 2009 15:04:02 -0700 Subject: lib: export generic atomic64_t functions The generic atomic64_t implementation in lib/ did not export the functions it defined, which means that modules that use atomic64_t would not link on platforms (such as 32-bit powerpc). For example, trying to build a kernel with CONFIG_NET_RDS on such a platform would fail with: ERROR: "atomic64_read" [net/rds/rds.ko] undefined! ERROR: "atomic64_set" [net/rds/rds.ko] undefined! Fix this by exporting the atomic64_t functions to modules. (I export the entire API even if it's not all currently used by in-tree modules to avoid having to continue fixing this in dribs and drabs) Signed-off-by: Roland Dreier Acked-by: Paul Mackerras Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- lib/atomic64.c | 11 +++++++++++ 1 file changed, 11 insertions(+) diff --git a/lib/atomic64.c b/lib/atomic64.c index c5e72556241..8bee16ec752 100644 --- a/lib/atomic64.c +++ b/lib/atomic64.c @@ -13,6 +13,7 @@ #include #include #include +#include #include /* @@ -52,6 +53,7 @@ long long atomic64_read(const atomic64_t *v) spin_unlock_irqrestore(lock, flags); return val; } +EXPORT_SYMBOL(atomic64_read); void atomic64_set(atomic64_t *v, long long i) { @@ -62,6 +64,7 @@ void atomic64_set(atomic64_t *v, long long i) v->counter = i; spin_unlock_irqrestore(lock, flags); } +EXPORT_SYMBOL(atomic64_set); void atomic64_add(long long a, atomic64_t *v) { @@ -72,6 +75,7 @@ void atomic64_add(long long a, atomic64_t *v) v->counter += a; spin_unlock_irqrestore(lock, flags); } +EXPORT_SYMBOL(atomic64_add); long long atomic64_add_return(long long a, atomic64_t *v) { @@ -84,6 +88,7 @@ long long atomic64_add_return(long long a, atomic64_t *v) spin_unlock_irqrestore(lock, flags); return val; } +EXPORT_SYMBOL(atomic64_add_return); void atomic64_sub(long long a, atomic64_t *v) { @@ -94,6 +99,7 @@ void atomic64_sub(long long a, atomic64_t *v) v->counter -= a; spin_unlock_irqrestore(lock, flags); } +EXPORT_SYMBOL(atomic64_sub); long long atomic64_sub_return(long long a, atomic64_t *v) { @@ -106,6 +112,7 @@ long long atomic64_sub_return(long long a, atomic64_t *v) spin_unlock_irqrestore(lock, flags); return val; } +EXPORT_SYMBOL(atomic64_sub_return); long long atomic64_dec_if_positive(atomic64_t *v) { @@ -120,6 +127,7 @@ long long atomic64_dec_if_positive(atomic64_t *v) spin_unlock_irqrestore(lock, flags); return val; } +EXPORT_SYMBOL(atomic64_dec_if_positive); long long atomic64_cmpxchg(atomic64_t *v, long long o, long long n) { @@ -134,6 +142,7 @@ long long atomic64_cmpxchg(atomic64_t *v, long long o, long long n) spin_unlock_irqrestore(lock, flags); return val; } +EXPORT_SYMBOL(atomic64_cmpxchg); long long atomic64_xchg(atomic64_t *v, long long new) { @@ -147,6 +156,7 @@ long long atomic64_xchg(atomic64_t *v, long long new) spin_unlock_irqrestore(lock, flags); return val; } +EXPORT_SYMBOL(atomic64_xchg); int atomic64_add_unless(atomic64_t *v, long long a, long long u) { @@ -162,6 +172,7 @@ int atomic64_add_unless(atomic64_t *v, long long a, long long u) spin_unlock_irqrestore(lock, flags); return ret; } +EXPORT_SYMBOL(atomic64_add_unless); static int init_atomic64_lock(void) { -- cgit v1.2.3 From b317c833211b7fbf902163de766f09554090e0bf Mon Sep 17 00:00:00 2001 From: Kristoffer Ericson Date: Wed, 29 Jul 2009 15:04:03 -0700 Subject: drivers/video/backlight/jornada720_bl.c: fix build Signed-off-by: Kristoffer Ericson Cc: Richard Purdie Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/video/backlight/jornada720_bl.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/video/backlight/jornada720_bl.c b/drivers/video/backlight/jornada720_bl.c index c3ebb6b41ce..7aed2565c1b 100644 --- a/drivers/video/backlight/jornada720_bl.c +++ b/drivers/video/backlight/jornada720_bl.c @@ -72,7 +72,7 @@ static int jornada_bl_update_status(struct backlight_device *bd) if (jornada_ssp_byte(SETBRIGHTNESS) != TXDUMMY) { printk(KERN_INFO "bl : failed to set brightness\n"); ret = -ETIMEDOUT; - goto out + goto out; } /* at this point we expect that the mcu has accepted -- cgit v1.2.3 From 096b7fe012d66ed55e98bc8022405ede0cc80e96 Mon Sep 17 00:00:00 2001 From: Li Zefan Date: Wed, 29 Jul 2009 15:04:04 -0700 Subject: cgroups: fix pid namespace bug The bug was introduced by commit cc31edceee04a7b87f2be48f9489ebb72d264844 ("cgroups: convert tasks file to use a seq_file with shared pid array"). We cache a pid array for all threads that are opening the same "tasks" file, but the pids in the array are always from the namespace of the last process that opened the file, so all other threads will read pids from that namespace instead of their own namespaces. To fix it, we maintain a list of pid arrays, which is keyed by pid_ns. The list will be of length 1 at most time. Reported-by: Paul Menage Idea-by: Paul Menage Signed-off-by: Li Zefan Reviewed-by: Serge Hallyn Cc: Balbir Singh Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- include/linux/cgroup.h | 11 +++--- kernel/cgroup.c | 96 +++++++++++++++++++++++++++++++++++++------------- 2 files changed, 76 insertions(+), 31 deletions(-) diff --git a/include/linux/cgroup.h b/include/linux/cgroup.h index 665fa70e409..20411d2876f 100644 --- a/include/linux/cgroup.h +++ b/include/linux/cgroup.h @@ -179,14 +179,11 @@ struct cgroup { */ struct list_head release_list; - /* pids_mutex protects the fields below */ + /* pids_mutex protects pids_list and cached pid arrays. */ struct rw_semaphore pids_mutex; - /* Array of process ids in the cgroup */ - pid_t *tasks_pids; - /* How many files are using the current tasks_pids array */ - int pids_use_count; - /* Length of the current tasks_pids array */ - int pids_length; + + /* Linked list of struct cgroup_pids */ + struct list_head pids_list; /* For RCU-protected deletion */ struct rcu_head rcu_head; diff --git a/kernel/cgroup.c b/kernel/cgroup.c index 3737a682cdf..250dac05680 100644 --- a/kernel/cgroup.c +++ b/kernel/cgroup.c @@ -47,6 +47,7 @@ #include #include #include +#include #include @@ -960,6 +961,7 @@ static void init_cgroup_housekeeping(struct cgroup *cgrp) INIT_LIST_HEAD(&cgrp->children); INIT_LIST_HEAD(&cgrp->css_sets); INIT_LIST_HEAD(&cgrp->release_list); + INIT_LIST_HEAD(&cgrp->pids_list); init_rwsem(&cgrp->pids_mutex); } static void init_cgroup_root(struct cgroupfs_root *root) @@ -2201,12 +2203,30 @@ err: return ret; } +/* + * Cache pids for all threads in the same pid namespace that are + * opening the same "tasks" file. + */ +struct cgroup_pids { + /* The node in cgrp->pids_list */ + struct list_head list; + /* The cgroup those pids belong to */ + struct cgroup *cgrp; + /* The namepsace those pids belong to */ + struct pid_namespace *ns; + /* Array of process ids in the cgroup */ + pid_t *tasks_pids; + /* How many files are using the this tasks_pids array */ + int use_count; + /* Length of the current tasks_pids array */ + int length; +}; + static int cmppid(const void *a, const void *b) { return *(pid_t *)a - *(pid_t *)b; } - /* * seq_file methods for the "tasks" file. The seq_file position is the * next pid to display; the seq_file iterator is a pointer to the pid @@ -2221,45 +2241,47 @@ static void *cgroup_tasks_start(struct seq_file *s, loff_t *pos) * after a seek to the start). Use a binary-search to find the * next pid to display, if any */ - struct cgroup *cgrp = s->private; + struct cgroup_pids *cp = s->private; + struct cgroup *cgrp = cp->cgrp; int index = 0, pid = *pos; int *iter; down_read(&cgrp->pids_mutex); if (pid) { - int end = cgrp->pids_length; + int end = cp->length; while (index < end) { int mid = (index + end) / 2; - if (cgrp->tasks_pids[mid] == pid) { + if (cp->tasks_pids[mid] == pid) { index = mid; break; - } else if (cgrp->tasks_pids[mid] <= pid) + } else if (cp->tasks_pids[mid] <= pid) index = mid + 1; else end = mid; } } /* If we're off the end of the array, we're done */ - if (index >= cgrp->pids_length) + if (index >= cp->length) return NULL; /* Update the abstract position to be the actual pid that we found */ - iter = cgrp->tasks_pids + index; + iter = cp->tasks_pids + index; *pos = *iter; return iter; } static void cgroup_tasks_stop(struct seq_file *s, void *v) { - struct cgroup *cgrp = s->private; + struct cgroup_pids *cp = s->private; + struct cgroup *cgrp = cp->cgrp; up_read(&cgrp->pids_mutex); } static void *cgroup_tasks_next(struct seq_file *s, void *v, loff_t *pos) { - struct cgroup *cgrp = s->private; + struct cgroup_pids *cp = s->private; int *p = v; - int *end = cgrp->tasks_pids + cgrp->pids_length; + int *end = cp->tasks_pids + cp->length; /* * Advance to the next pid in the array. If this goes off the @@ -2286,26 +2308,33 @@ static struct seq_operations cgroup_tasks_seq_operations = { .show = cgroup_tasks_show, }; -static void release_cgroup_pid_array(struct cgroup *cgrp) +static void release_cgroup_pid_array(struct cgroup_pids *cp) { + struct cgroup *cgrp = cp->cgrp; + down_write(&cgrp->pids_mutex); - BUG_ON(!cgrp->pids_use_count); - if (!--cgrp->pids_use_count) { - kfree(cgrp->tasks_pids); - cgrp->tasks_pids = NULL; - cgrp->pids_length = 0; + BUG_ON(!cp->use_count); + if (!--cp->use_count) { + list_del(&cp->list); + put_pid_ns(cp->ns); + kfree(cp->tasks_pids); + kfree(cp); } up_write(&cgrp->pids_mutex); } static int cgroup_tasks_release(struct inode *inode, struct file *file) { - struct cgroup *cgrp = __d_cgrp(file->f_dentry->d_parent); + struct seq_file *seq; + struct cgroup_pids *cp; if (!(file->f_mode & FMODE_READ)) return 0; - release_cgroup_pid_array(cgrp); + seq = file->private_data; + cp = seq->private; + + release_cgroup_pid_array(cp); return seq_release(inode, file); } @@ -2324,6 +2353,8 @@ static struct file_operations cgroup_tasks_operations = { static int cgroup_tasks_open(struct inode *unused, struct file *file) { struct cgroup *cgrp = __d_cgrp(file->f_dentry->d_parent); + struct pid_namespace *ns = current->nsproxy->pid_ns; + struct cgroup_pids *cp; pid_t *pidarray; int npids; int retval; @@ -2350,20 +2381,37 @@ static int cgroup_tasks_open(struct inode *unused, struct file *file) * array if necessary */ down_write(&cgrp->pids_mutex); - kfree(cgrp->tasks_pids); - cgrp->tasks_pids = pidarray; - cgrp->pids_length = npids; - cgrp->pids_use_count++; + + list_for_each_entry(cp, &cgrp->pids_list, list) { + if (ns == cp->ns) + goto found; + } + + cp = kzalloc(sizeof(*cp), GFP_KERNEL); + if (!cp) { + up_write(&cgrp->pids_mutex); + kfree(pidarray); + return -ENOMEM; + } + cp->cgrp = cgrp; + cp->ns = ns; + get_pid_ns(ns); + list_add(&cp->list, &cgrp->pids_list); +found: + kfree(cp->tasks_pids); + cp->tasks_pids = pidarray; + cp->length = npids; + cp->use_count++; up_write(&cgrp->pids_mutex); file->f_op = &cgroup_tasks_operations; retval = seq_open(file, &cgroup_tasks_seq_operations); if (retval) { - release_cgroup_pid_array(cgrp); + release_cgroup_pid_array(cp); return retval; } - ((struct seq_file *)file->private_data)->private = cgrp; + ((struct seq_file *)file->private_data)->private = cp; return 0; } -- cgit v1.2.3 From f0d83679a8d471dc8b646919f70595d6fe8c9606 Mon Sep 17 00:00:00 2001 From: Sebastian Heutling Date: Wed, 29 Jul 2009 15:04:05 -0700 Subject: eeprom/at25: bugfix "not ready" timeout after write Under certain circumstances msleep(1) within the loop, which waits for the EEPROM to be finished, might take longer than the timeout. On the next loop the status register might now return to be ready and therefore the loop finishes. The following check now tests if a timeout occurred and if so returns an error although the device reported it was ready. This fix replaces testing the occurrence of the timeout by testing the "not ready" bit in the status register. Signed-off-by: Sebastian Heutling Signed-off-by: David Brownell Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/misc/eeprom/at25.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/misc/eeprom/at25.c b/drivers/misc/eeprom/at25.c index b34cb5f79ee..2e535a0ccd5 100644 --- a/drivers/misc/eeprom/at25.c +++ b/drivers/misc/eeprom/at25.c @@ -173,6 +173,7 @@ at25_ee_write(struct at25_data *at25, const char *buf, loff_t off, unsigned segment; unsigned offset = (unsigned) off; u8 *cp = bounce + 1; + int sr; *cp = AT25_WREN; status = spi_write(at25->spi, cp, 1); @@ -214,7 +215,6 @@ at25_ee_write(struct at25_data *at25, const char *buf, loff_t off, timeout = jiffies + msecs_to_jiffies(EE_TIMEOUT); retries = 0; do { - int sr; sr = spi_w8r8(at25->spi, AT25_RDSR); if (sr < 0 || (sr & AT25_SR_nRDY)) { @@ -228,7 +228,7 @@ at25_ee_write(struct at25_data *at25, const char *buf, loff_t off, break; } while (retries++ < 3 || time_before_eq(jiffies, timeout)); - if (time_after(jiffies, timeout)) { + if ((sr < 0) || (sr & AT25_SR_nRDY)) { dev_err(&at25->spi->dev, "write %d bytes offset %d, " "timeout after %u msecs\n", -- cgit v1.2.3 From 887032670d47366a8c8f25396ea7c14b7b2cc620 Mon Sep 17 00:00:00 2001 From: KAMEZAWA Hiroyuki Date: Wed, 29 Jul 2009 15:04:06 -0700 Subject: cgroup avoid permanent sleep at rmdir After commit ec64f51545fffbc4cb968f0cea56341a4b07e85a ("cgroup: fix frequent -EBUSY at rmdir"), cgroup's rmdir (especially against memcg) doesn't return -EBUSY by temporary ref counts. That commit expects all refs after pre_destroy() is temporary but...it wasn't. Then, rmdir can wait permanently. This patch tries to fix that and change followings. - set CGRP_WAIT_ON_RMDIR flag before pre_destroy(). - clear CGRP_WAIT_ON_RMDIR flag when the subsys finds racy case. if there are sleeping ones, wakes them up. - rmdir() sleeps only when CGRP_WAIT_ON_RMDIR flag is set. Tested-by: Daisuke Nishimura Reported-by: Daisuke Nishimura Reviewed-by: Paul Menage Acked-by: Balbir Sigh Signed-off-by: KAMEZAWA Hiroyuki Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- include/linux/cgroup.h | 17 ++++++++++++++++ kernel/cgroup.c | 55 ++++++++++++++++++++++++++++++++++---------------- mm/memcontrol.c | 23 ++++++++++++++++++--- 3 files changed, 75 insertions(+), 20 deletions(-) diff --git a/include/linux/cgroup.h b/include/linux/cgroup.h index 20411d2876f..90bba9e6228 100644 --- a/include/linux/cgroup.h +++ b/include/linux/cgroup.h @@ -362,6 +362,23 @@ int cgroup_task_count(const struct cgroup *cgrp); /* Return true if cgrp is a descendant of the task's cgroup */ int cgroup_is_descendant(const struct cgroup *cgrp, struct task_struct *task); +/* + * When the subsys has to access css and may add permanent refcnt to css, + * it should take care of racy conditions with rmdir(). Following set of + * functions, is for stop/restart rmdir if necessary. + * Because these will call css_get/put, "css" should be alive css. + * + * cgroup_exclude_rmdir(); + * ...do some jobs which may access arbitrary empty cgroup + * cgroup_release_and_wakeup_rmdir(); + * + * When someone removes a cgroup while cgroup_exclude_rmdir() holds it, + * it sleeps and cgroup_release_and_wakeup_rmdir() will wake him up. + */ + +void cgroup_exclude_rmdir(struct cgroup_subsys_state *css); +void cgroup_release_and_wakeup_rmdir(struct cgroup_subsys_state *css); + /* * Control Group subsystem type. * See Documentation/cgroups/cgroups.txt for details diff --git a/kernel/cgroup.c b/kernel/cgroup.c index 250dac05680..b6eadfe30e7 100644 --- a/kernel/cgroup.c +++ b/kernel/cgroup.c @@ -735,16 +735,28 @@ static void cgroup_d_remove_dir(struct dentry *dentry) * reference to css->refcnt. In general, this refcnt is expected to goes down * to zero, soon. * - * CGRP_WAIT_ON_RMDIR flag is modified under cgroup's inode->i_mutex; + * CGRP_WAIT_ON_RMDIR flag is set under cgroup's inode->i_mutex; */ DECLARE_WAIT_QUEUE_HEAD(cgroup_rmdir_waitq); -static void cgroup_wakeup_rmdir_waiters(const struct cgroup *cgrp) +static void cgroup_wakeup_rmdir_waiter(struct cgroup *cgrp) { - if (unlikely(test_bit(CGRP_WAIT_ON_RMDIR, &cgrp->flags))) + if (unlikely(test_and_clear_bit(CGRP_WAIT_ON_RMDIR, &cgrp->flags))) wake_up_all(&cgroup_rmdir_waitq); } +void cgroup_exclude_rmdir(struct cgroup_subsys_state *css) +{ + css_get(css); +} + +void cgroup_release_and_wakeup_rmdir(struct cgroup_subsys_state *css) +{ + cgroup_wakeup_rmdir_waiter(css->cgroup); + css_put(css); +} + + static int rebind_subsystems(struct cgroupfs_root *root, unsigned long final_bits) { @@ -1359,7 +1371,7 @@ int cgroup_attach_task(struct cgroup *cgrp, struct task_struct *tsk) * wake up rmdir() waiter. the rmdir should fail since the cgroup * is no longer empty. */ - cgroup_wakeup_rmdir_waiters(cgrp); + cgroup_wakeup_rmdir_waiter(cgrp); return 0; } @@ -2743,34 +2755,43 @@ again: } mutex_unlock(&cgroup_mutex); + /* + * In general, subsystem has no css->refcnt after pre_destroy(). But + * in racy cases, subsystem may have to get css->refcnt after + * pre_destroy() and it makes rmdir return with -EBUSY. This sometimes + * make rmdir return -EBUSY too often. To avoid that, we use waitqueue + * for cgroup's rmdir. CGRP_WAIT_ON_RMDIR is for synchronizing rmdir + * and subsystem's reference count handling. Please see css_get/put + * and css_tryget() and cgroup_wakeup_rmdir_waiter() implementation. + */ + set_bit(CGRP_WAIT_ON_RMDIR, &cgrp->flags); + /* * Call pre_destroy handlers of subsys. Notify subsystems * that rmdir() request comes. */ ret = cgroup_call_pre_destroy(cgrp); - if (ret) + if (ret) { + clear_bit(CGRP_WAIT_ON_RMDIR, &cgrp->flags); return ret; + } mutex_lock(&cgroup_mutex); parent = cgrp->parent; if (atomic_read(&cgrp->count) || !list_empty(&cgrp->children)) { + clear_bit(CGRP_WAIT_ON_RMDIR, &cgrp->flags); mutex_unlock(&cgroup_mutex); return -EBUSY; } - /* - * css_put/get is provided for subsys to grab refcnt to css. In typical - * case, subsystem has no reference after pre_destroy(). But, under - * hierarchy management, some *temporal* refcnt can be hold. - * To avoid returning -EBUSY to a user, waitqueue is used. If subsys - * is really busy, it should return -EBUSY at pre_destroy(). wake_up - * is called when css_put() is called and refcnt goes down to 0. - */ - set_bit(CGRP_WAIT_ON_RMDIR, &cgrp->flags); prepare_to_wait(&cgroup_rmdir_waitq, &wait, TASK_INTERRUPTIBLE); - if (!cgroup_clear_css_refs(cgrp)) { mutex_unlock(&cgroup_mutex); - schedule(); + /* + * Because someone may call cgroup_wakeup_rmdir_waiter() before + * prepare_to_wait(), we need to check this flag. + */ + if (test_bit(CGRP_WAIT_ON_RMDIR, &cgrp->flags)) + schedule(); finish_wait(&cgroup_rmdir_waitq, &wait); clear_bit(CGRP_WAIT_ON_RMDIR, &cgrp->flags); if (signal_pending(current)) @@ -3342,7 +3363,7 @@ void __css_put(struct cgroup_subsys_state *css) set_bit(CGRP_RELEASABLE, &cgrp->flags); check_for_release(cgrp); } - cgroup_wakeup_rmdir_waiters(cgrp); + cgroup_wakeup_rmdir_waiter(cgrp); } rcu_read_unlock(); } diff --git a/mm/memcontrol.c b/mm/memcontrol.c index e717964cb5a..fd4529d86de 100644 --- a/mm/memcontrol.c +++ b/mm/memcontrol.c @@ -1207,6 +1207,12 @@ static int mem_cgroup_move_account(struct page_cgroup *pc, ret = 0; out: unlock_page_cgroup(pc); + /* + * We charges against "to" which may not have any tasks. Then, "to" + * can be under rmdir(). But in current implementation, caller of + * this function is just force_empty() and it's garanteed that + * "to" is never removed. So, we don't check rmdir status here. + */ return ret; } @@ -1428,6 +1434,7 @@ __mem_cgroup_commit_charge_swapin(struct page *page, struct mem_cgroup *ptr, return; if (!ptr) return; + cgroup_exclude_rmdir(&ptr->css); pc = lookup_page_cgroup(page); mem_cgroup_lru_del_before_commit_swapcache(page); __mem_cgroup_commit_charge(ptr, pc, ctype); @@ -1457,8 +1464,12 @@ __mem_cgroup_commit_charge_swapin(struct page *page, struct mem_cgroup *ptr, } rcu_read_unlock(); } - /* add this page(page_cgroup) to the LRU we want. */ - + /* + * At swapin, we may charge account against cgroup which has no tasks. + * So, rmdir()->pre_destroy() can be called while we do this charge. + * In that case, we need to call pre_destroy() again. check it here. + */ + cgroup_release_and_wakeup_rmdir(&ptr->css); } void mem_cgroup_commit_charge_swapin(struct page *page, struct mem_cgroup *ptr) @@ -1664,7 +1675,7 @@ void mem_cgroup_end_migration(struct mem_cgroup *mem, if (!mem) return; - + cgroup_exclude_rmdir(&mem->css); /* at migration success, oldpage->mapping is NULL. */ if (oldpage->mapping) { target = oldpage; @@ -1704,6 +1715,12 @@ void mem_cgroup_end_migration(struct mem_cgroup *mem, */ if (ctype == MEM_CGROUP_CHARGE_TYPE_MAPPED) mem_cgroup_uncharge_page(target); + /* + * At migration, we may charge account against cgroup which has no tasks + * So, rmdir()->pre_destroy() can be called while we do this charge. + * In that case, we need to call pre_destroy() again. check it here. + */ + cgroup_release_and_wakeup_rmdir(&mem->css); } /* -- cgit v1.2.3 From 1fc28b70fe2dbf87e061b6ce5091a1f8e4e5d4e7 Mon Sep 17 00:00:00 2001 From: Mel Gorman Date: Wed, 29 Jul 2009 15:04:08 -0700 Subject: page-allocator: allow too high-order warning messages to be suppressed with __GFP_NOWARN The page allocator warns once when an order >= MAX_ORDER is specified. This is to catch callers of the allocator that are always falling back to their worst-case when it was not expected. However, there are cases where the caller is behaving correctly but cannot suppress the warning. This patch allows the warning to be suppressed by the callers by specifying __GFP_NOWARN. Signed-off-by: Mel Gorman Acked-by: David Rientjes Cc: Arnaldo Carvalho de Melo Cc: "David S. Miller" Cc: "Rafael J. Wysocki" Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- mm/page_alloc.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/mm/page_alloc.c b/mm/page_alloc.c index 2dbb2fc6883..d052abbe306 100644 --- a/mm/page_alloc.c +++ b/mm/page_alloc.c @@ -1745,8 +1745,10 @@ __alloc_pages_slowpath(gfp_t gfp_mask, unsigned int order, * be using allocators in order of preference for an area that is * too large. */ - if (WARN_ON_ONCE(order >= MAX_ORDER)) + if (order >= MAX_ORDER) { + WARN_ON_ONCE(!(gfp_mask & __GFP_NOWARN)); return NULL; + } /* * GFP_THISNODE (meaning __GFP_THISNODE, __GFP_NORETRY and -- cgit v1.2.3 From b62f495dad04fa94b5083aec638ff3072bccaaca Mon Sep 17 00:00:00 2001 From: Mel Gorman Date: Wed, 29 Jul 2009 15:04:09 -0700 Subject: profile: suppress warning about large allocations when profile=1 is specified When profile= is used, a large buffer is allocated early at boot. This can be larger than what the page allocator can provide so it prints a warning. However, the caller is able to handle the situation so this patch suppresses the warning. Signed-off-by: Mel Gorman Cc: "Rafael J. Wysocki" Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- kernel/profile.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) diff --git a/kernel/profile.c b/kernel/profile.c index 69911b5745e..419250ebec4 100644 --- a/kernel/profile.c +++ b/kernel/profile.c @@ -117,11 +117,12 @@ int __ref profile_init(void) cpumask_copy(prof_cpu_mask, cpu_possible_mask); - prof_buffer = kzalloc(buffer_bytes, GFP_KERNEL); + prof_buffer = kzalloc(buffer_bytes, GFP_KERNEL|__GFP_NOWARN); if (prof_buffer) return 0; - prof_buffer = alloc_pages_exact(buffer_bytes, GFP_KERNEL|__GFP_ZERO); + prof_buffer = alloc_pages_exact(buffer_bytes, + GFP_KERNEL|__GFP_ZERO|__GFP_NOWARN); if (prof_buffer) return 0; -- cgit v1.2.3 From 1c29b3ff4f2d847464f7be3a0e179c6dfc69bd02 Mon Sep 17 00:00:00 2001 From: Mel Gorman Date: Wed, 29 Jul 2009 15:04:10 -0700 Subject: net-dccp: suppress warning about large allocations from DCCP The DCCP protocol tries to allocate some large hash tables during initialisation using the largest size possible. This can be larger than what the page allocator can provide so it prints a warning. However, the caller is able to handle the situation so this patch suppresses the warning. Signed-off-by: Mel Gorman Acked-by: Arnaldo Carvalho de Melo Cc: "David S. Miller" Cc: "Rafael J. Wysocki" Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- net/dccp/proto.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/net/dccp/proto.c b/net/dccp/proto.c index 94ca8eaace7..3281013ce03 100644 --- a/net/dccp/proto.c +++ b/net/dccp/proto.c @@ -1066,7 +1066,7 @@ static int __init dccp_init(void) (dccp_hashinfo.ehash_size - 1)) dccp_hashinfo.ehash_size--; dccp_hashinfo.ehash = (struct inet_ehash_bucket *) - __get_free_pages(GFP_ATOMIC, ehash_order); + __get_free_pages(GFP_ATOMIC|__GFP_NOWARN, ehash_order); } while (!dccp_hashinfo.ehash && --ehash_order > 0); if (!dccp_hashinfo.ehash) { @@ -1091,7 +1091,7 @@ static int __init dccp_init(void) bhash_order > 0) continue; dccp_hashinfo.bhash = (struct inet_bind_hashbucket *) - __get_free_pages(GFP_ATOMIC, bhash_order); + __get_free_pages(GFP_ATOMIC|__GFP_NOWARN, bhash_order); } while (!dccp_hashinfo.bhash && --bhash_order >= 0); if (!dccp_hashinfo.bhash) { -- cgit v1.2.3 From 5c8053652328693d10551131432ef3573e77ed2d Mon Sep 17 00:00:00 2001 From: Catalin Marinas Date: Wed, 29 Jul 2009 15:04:11 -0700 Subject: fs/ramfs/file-nommu.c needs include/linux/sched.h This file makes use of various macros defined in files like asm/current.h or asm-generic/resource.h. All these files can be included via sched.h. The building of the !MMU ARM kernel (with additional patches) fails without this change. Signed-off-by: Catalin Marinas Acked-by: David Howells Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- fs/ramfs/file-nommu.c | 1 + 1 file changed, 1 insertion(+) diff --git a/fs/ramfs/file-nommu.c b/fs/ramfs/file-nommu.c index ebb2c417912..11f0c06316d 100644 --- a/fs/ramfs/file-nommu.c +++ b/fs/ramfs/file-nommu.c @@ -20,6 +20,7 @@ #include #include #include +#include #include #include "internal.h" -- cgit v1.2.3 From f5a55efa140f5e9c9dd0f398fef54f20cdb74ec9 Mon Sep 17 00:00:00 2001 From: Dave Jones Date: Wed, 29 Jul 2009 15:04:12 -0700 Subject: pps.h needs Found with make headers_check /usr/include/linux/pps.h:52: found __[us]{8,16,32,64} type without #include Signed-off-by: Dave Jones Cc: Rodolfo Giometti Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- include/linux/pps.h | 2 ++ 1 file changed, 2 insertions(+) diff --git a/include/linux/pps.h b/include/linux/pps.h index cfe5c7214ec..0194ab06177 100644 --- a/include/linux/pps.h +++ b/include/linux/pps.h @@ -22,6 +22,8 @@ #ifndef _PPS_H_ #define _PPS_H_ +#include + #define PPS_VERSION "5.3.6" #define PPS_MAX_SOURCES 16 /* should be enough... */ -- cgit v1.2.3 From cab8bd3410d448279e3bd0fbf96d31db0bf770fa Mon Sep 17 00:00:00 2001 From: Hidetoshi Seto Date: Wed, 29 Jul 2009 15:04:14 -0700 Subject: sysrq, kdump: make sysrq-c consistent commit d6580a9f15238b87e618310c862231ae3f352d2d ("kexec: sysrq: simplify sysrq-c handler") changed the behavior of sysrq-c to unconditional dereference of NULL pointer. So in cases with CONFIG_KEXEC, where crash_kexec() was directly called from sysrq-c before, now it can be said that a step of "real oops" was inserted before starting kdump. However, in contrast to oops via SysRq-c from keyboard which results in panic due to in_interrupt(), oops via "echo c > /proc/sysrq-trigger" will not become panic unless panic_on_oops=1. It means that even if dump is properly configured to be taken on panic, the sysrq-c from proc interface might not start crashdump while the sysrq-c from keyboard can start crashdump. This confuses traditional users of kdump, i.e. people who expect sysrq-c to do common behavior in both of the keyboard and proc interface. This patch brings the keyboard and proc interface behavior of sysrq-c in line, by forcing panic_on_oops=1 before oops in sysrq-c handler. And some updates in documentation are included, to clarify that there is no longer dependency with CONFIG_KEXEC, and that now the system can just crash by sysrq-c if no dump mechanism is configured. Signed-off-by: Hidetoshi Seto Cc: Lai Jiangshan Cc: Ken'ichi Ohmichi Acked-by: Neil Horman Acked-by: Vivek Goyal Cc: Brayan Arraes Cc: Eric W. Biederman Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- Documentation/sysrq.txt | 7 ++++--- drivers/char/sysrq.c | 8 +++++--- 2 files changed, 9 insertions(+), 6 deletions(-) diff --git a/Documentation/sysrq.txt b/Documentation/sysrq.txt index cf42b820ff9..d56a0177542 100644 --- a/Documentation/sysrq.txt +++ b/Documentation/sysrq.txt @@ -66,7 +66,8 @@ On all - write a character to /proc/sysrq-trigger. e.g.: 'b' - Will immediately reboot the system without syncing or unmounting your disks. -'c' - Will perform a kexec reboot in order to take a crashdump. +'c' - Will perform a system crash by a NULL pointer dereference. + A crashdump will be taken if configured. 'd' - Shows all locks that are held. @@ -141,8 +142,8 @@ useful when you want to exit a program that will not let you switch consoles. re'B'oot is good when you're unable to shut down. But you should also 'S'ync and 'U'mount first. -'C'rashdump can be used to manually trigger a crashdump when the system is hung. -The kernel needs to have been built with CONFIG_KEXEC enabled. +'C'rash can be used to manually trigger a crashdump when the system is hung. +Note that this just triggers a crash if there is no dump mechanism available. 'S'ync is great when your system is locked up, it allows you to sync your disks and will certainly lessen the chance of data loss and fscking. Note diff --git a/drivers/char/sysrq.c b/drivers/char/sysrq.c index 0db35857e4d..5d7a02f63e1 100644 --- a/drivers/char/sysrq.c +++ b/drivers/char/sysrq.c @@ -35,7 +35,6 @@ #include #include #include -#include #include #include @@ -124,9 +123,12 @@ static struct sysrq_key_op sysrq_unraw_op = { static void sysrq_handle_crash(int key, struct tty_struct *tty) { char *killer = NULL; + + panic_on_oops = 1; /* force panic */ + wmb(); *killer = 1; } -static struct sysrq_key_op sysrq_crashdump_op = { +static struct sysrq_key_op sysrq_crash_op = { .handler = sysrq_handle_crash, .help_msg = "Crash", .action_msg = "Trigger a crash", @@ -401,7 +403,7 @@ static struct sysrq_key_op *sysrq_key_table[36] = { */ NULL, /* a */ &sysrq_reboot_op, /* b */ - &sysrq_crashdump_op, /* c & ibm_emac driver debug */ + &sysrq_crash_op, /* c & ibm_emac driver debug */ &sysrq_showlocks_op, /* d */ &sysrq_term_op, /* e */ &sysrq_moom_op, /* f */ -- cgit v1.2.3 From a9e58f25734e153b8c6516d904e2398fb8b0b23d Mon Sep 17 00:00:00 2001 From: Anton Vorontsov Date: Wed, 29 Jul 2009 15:04:16 -0700 Subject: sdhci: get rid of "frequency too high" flood when using eSDHC Since commit 8dfd0374be84793360db7fff2e635d2cd3bbcb21 ("MMC core: limit minimum initialization frequency to 400kHz") MMC core checks for minimum frequency, and that causes following messages flood when using eSDHC controllers: ... mmc0: Minimum clock frequency too high for identification mode mmc0: Minimum clock frequency too high for identification mode ... The warnings are legitimate, since if we'd use 133 MHz clocks for standard SDHCI controllers, we'd not able to scale frequency down to 400 kHz. But eSDHC controllers have a non-standard SD clock management, so we can divide clock by 256 * 16, not just 256. This patch introduces get_min_clock() callback for sdhci core and implements it for sdhci-of driver, and thus fixes the issue. Signed-off-by: Anton Vorontsov Cc: Matt Fleming Cc: Ian Molton Cc: "Roberto A. Foglietta" Cc: Pierre Ossman Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/mmc/host/sdhci-of.c | 8 ++++++++ drivers/mmc/host/sdhci.c | 5 ++++- drivers/mmc/host/sdhci.h | 1 + 3 files changed, 13 insertions(+), 1 deletion(-) diff --git a/drivers/mmc/host/sdhci-of.c b/drivers/mmc/host/sdhci-of.c index d79fa55c3b8..908844327db 100644 --- a/drivers/mmc/host/sdhci-of.c +++ b/drivers/mmc/host/sdhci-of.c @@ -158,6 +158,13 @@ static unsigned int esdhc_get_max_clock(struct sdhci_host *host) return of_host->clock; } +static unsigned int esdhc_get_min_clock(struct sdhci_host *host) +{ + struct sdhci_of_host *of_host = sdhci_priv(host); + + return of_host->clock / 256 / 16; +} + static unsigned int esdhc_get_timeout_clock(struct sdhci_host *host) { struct sdhci_of_host *of_host = sdhci_priv(host); @@ -184,6 +191,7 @@ static struct sdhci_of_data sdhci_esdhc = { .set_clock = esdhc_set_clock, .enable_dma = esdhc_enable_dma, .get_max_clock = esdhc_get_max_clock, + .get_min_clock = esdhc_get_min_clock, .get_timeout_clock = esdhc_get_timeout_clock, }, }; diff --git a/drivers/mmc/host/sdhci.c b/drivers/mmc/host/sdhci.c index 6779b4ecab1..62041c7e924 100644 --- a/drivers/mmc/host/sdhci.c +++ b/drivers/mmc/host/sdhci.c @@ -1766,7 +1766,10 @@ int sdhci_add_host(struct sdhci_host *host) * Set host parameters. */ mmc->ops = &sdhci_ops; - mmc->f_min = host->max_clk / 256; + if (host->ops->get_min_clock) + mmc->f_min = host->ops->get_min_clock(host); + else + mmc->f_min = host->max_clk / 256; mmc->f_max = host->max_clk; mmc->caps = MMC_CAP_SDIO_IRQ; diff --git a/drivers/mmc/host/sdhci.h b/drivers/mmc/host/sdhci.h index 831ddf7dcb4..c77e9ff3022 100644 --- a/drivers/mmc/host/sdhci.h +++ b/drivers/mmc/host/sdhci.h @@ -302,6 +302,7 @@ struct sdhci_ops { int (*enable_dma)(struct sdhci_host *host); unsigned int (*get_max_clock)(struct sdhci_host *host); + unsigned int (*get_min_clock)(struct sdhci_host *host); unsigned int (*get_timeout_clock)(struct sdhci_host *host); }; -- cgit v1.2.3 From 534acc057b5a08ec33fa57cdd2f5a09ef124e7f2 Mon Sep 17 00:00:00 2001 From: Dave Hansen Date: Wed, 29 Jul 2009 15:04:18 -0700 Subject: lib: flexible array implementation Once a structure goes over PAGE_SIZE*2, we see occasional allocation failures. Some people have chosen to switch over to things like vmalloc() that will let them keep array-like access to such a large structures. But, vmalloc() has plenty of downsides. Here's an alternative. I think it's what Andrew was suggesting here: http://lkml.org/lkml/2009/7/2/518 I call it a flexible array. It does all of its work in PAGE_SIZE bits, so never does an order>0 allocation. The base level has PAGE_SIZE-2*sizeof(int) bytes of storage for pointers to the second level. So, with a 32-bit arch, you get about 4MB (4183112 bytes) of total storage when the objects pack nicely into a page. It is half that on 64-bit because the pointers are twice the size. There's a table detailing this in the code. There are kerneldocs for the functions, but here's an overview: flex_array_alloc() - dynamically allocate a base structure flex_array_free() - free the array and all of the second-level pages flex_array_free_parts() - free the second-level pages, but not the base (for static bases) flex_array_put() - copy into the array at the given index flex_array_get() - copy out of the array at the given index flex_array_prealloc() - preallocate the second-level pages between the given indexes to guarantee no allocs will occur at put() time. We could also potentially just pass the "element_size" into each of the API functions instead of storing it internally. That would get us one more base pointer on 32-bit. I've been testing this by running it in userspace. The header and patch that I've been using are here, as well as the little script I'm using to generate the size table which goes in the kerneldocs. http://sr71.net/~dave/linux/flexarray/ [akpm@linux-foundation.org: coding-style fixes] Signed-off-by: Dave Hansen Reviewed-by: KAMEZAWA Hiroyuki Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- include/linux/flex_array.h | 47 ++++++++ lib/Makefile | 2 +- lib/flex_array.c | 269 +++++++++++++++++++++++++++++++++++++++++++++ 3 files changed, 317 insertions(+), 1 deletion(-) create mode 100644 include/linux/flex_array.h create mode 100644 lib/flex_array.c diff --git a/include/linux/flex_array.h b/include/linux/flex_array.h new file mode 100644 index 00000000000..23c1ec79a31 --- /dev/null +++ b/include/linux/flex_array.h @@ -0,0 +1,47 @@ +#ifndef _FLEX_ARRAY_H +#define _FLEX_ARRAY_H + +#include +#include + +#define FLEX_ARRAY_PART_SIZE PAGE_SIZE +#define FLEX_ARRAY_BASE_SIZE PAGE_SIZE + +struct flex_array_part; + +/* + * This is meant to replace cases where an array-like + * structure has gotten too big to fit into kmalloc() + * and the developer is getting tempted to use + * vmalloc(). + */ + +struct flex_array { + union { + struct { + int element_size; + int total_nr_elements; + struct flex_array_part *parts[0]; + }; + /* + * This little trick makes sure that + * sizeof(flex_array) == PAGE_SIZE + */ + char padding[FLEX_ARRAY_BASE_SIZE]; + }; +}; + +#define FLEX_ARRAY_INIT(size, total) { { {\ + .element_size = (size), \ + .total_nr_elements = (total), \ +} } } + +struct flex_array *flex_array_alloc(int element_size, int total, gfp_t flags); +int flex_array_prealloc(struct flex_array *fa, int start, int end, gfp_t flags); +void flex_array_free(struct flex_array *fa); +void flex_array_free_parts(struct flex_array *fa); +int flex_array_put(struct flex_array *fa, int element_nr, void *src, + gfp_t flags); +void *flex_array_get(struct flex_array *fa, int element_nr); + +#endif /* _FLEX_ARRAY_H */ diff --git a/lib/Makefile b/lib/Makefile index b6d1857bbf0..2e78277eff9 100644 --- a/lib/Makefile +++ b/lib/Makefile @@ -12,7 +12,7 @@ lib-y := ctype.o string.o vsprintf.o cmdline.o \ idr.o int_sqrt.o extable.o prio_tree.o \ sha1.o irq_regs.o reciprocal_div.o argv_split.o \ proportions.o prio_heap.o ratelimit.o show_mem.o \ - is_single_threaded.o plist.o decompress.o + is_single_threaded.o plist.o decompress.o flex_array.o lib-$(CONFIG_MMU) += ioremap.o lib-$(CONFIG_SMP) += cpumask.o diff --git a/lib/flex_array.c b/lib/flex_array.c new file mode 100644 index 00000000000..0e7894ce888 --- /dev/null +++ b/lib/flex_array.c @@ -0,0 +1,269 @@ +/* + * Flexible array managed in PAGE_SIZE parts + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. + * + * Copyright IBM Corporation, 2009 + * + * Author: Dave Hansen + */ + +#include +#include +#include + +struct flex_array_part { + char elements[FLEX_ARRAY_PART_SIZE]; +}; + +static inline int __elements_per_part(int element_size) +{ + return FLEX_ARRAY_PART_SIZE / element_size; +} + +static inline int bytes_left_in_base(void) +{ + int element_offset = offsetof(struct flex_array, parts); + int bytes_left = FLEX_ARRAY_BASE_SIZE - element_offset; + return bytes_left; +} + +static inline int nr_base_part_ptrs(void) +{ + return bytes_left_in_base() / sizeof(struct flex_array_part *); +} + +/* + * If a user requests an allocation which is small + * enough, we may simply use the space in the + * flex_array->parts[] array to store the user + * data. + */ +static inline int elements_fit_in_base(struct flex_array *fa) +{ + int data_size = fa->element_size * fa->total_nr_elements; + if (data_size <= bytes_left_in_base()) + return 1; + return 0; +} + +/** + * flex_array_alloc - allocate a new flexible array + * @element_size: the size of individual elements in the array + * @total: total number of elements that this should hold + * + * Note: all locking must be provided by the caller. + * + * @total is used to size internal structures. If the user ever + * accesses any array indexes >=@total, it will produce errors. + * + * The maximum number of elements is defined as: the number of + * elements that can be stored in a page times the number of + * page pointers that we can fit in the base structure or (using + * integer math): + * + * (PAGE_SIZE/element_size) * (PAGE_SIZE-8)/sizeof(void *) + * + * Here's a table showing example capacities. Note that the maximum + * index that the get/put() functions is just nr_objects-1. This + * basically means that you get 4MB of storage on 32-bit and 2MB on + * 64-bit. + * + * + * Element size | Objects | Objects | + * PAGE_SIZE=4k | 32-bit | 64-bit | + * ---------------------------------| + * 1 bytes | 4186112 | 2093056 | + * 2 bytes | 2093056 | 1046528 | + * 3 bytes | 1395030 | 697515 | + * 4 bytes | 1046528 | 523264 | + * 32 bytes | 130816 | 65408 | + * 33 bytes | 126728 | 63364 | + * 2048 bytes | 2044 | 1022 | + * 2049 bytes | 1022 | 511 | + * void * | 1046528 | 261632 | + * + * Since 64-bit pointers are twice the size, we lose half the + * capacity in the base structure. Also note that no effort is made + * to efficiently pack objects across page boundaries. + */ +struct flex_array *flex_array_alloc(int element_size, int total, gfp_t flags) +{ + struct flex_array *ret; + int max_size = nr_base_part_ptrs() * __elements_per_part(element_size); + + /* max_size will end up 0 if element_size > PAGE_SIZE */ + if (total > max_size) + return NULL; + ret = kzalloc(sizeof(struct flex_array), flags); + if (!ret) + return NULL; + ret->element_size = element_size; + ret->total_nr_elements = total; + return ret; +} + +static int fa_element_to_part_nr(struct flex_array *fa, int element_nr) +{ + return element_nr / __elements_per_part(fa->element_size); +} + +/** + * flex_array_free_parts - just free the second-level pages + * @src: address of data to copy into the array + * @element_nr: index of the position in which to insert + * the new element. + * + * This is to be used in cases where the base 'struct flex_array' + * has been statically allocated and should not be free. + */ +void flex_array_free_parts(struct flex_array *fa) +{ + int part_nr; + int max_part = nr_base_part_ptrs(); + + if (elements_fit_in_base(fa)) + return; + for (part_nr = 0; part_nr < max_part; part_nr++) + kfree(fa->parts[part_nr]); +} + +void flex_array_free(struct flex_array *fa) +{ + flex_array_free_parts(fa); + kfree(fa); +} + +static int fa_index_inside_part(struct flex_array *fa, int element_nr) +{ + return element_nr % __elements_per_part(fa->element_size); +} + +static int index_inside_part(struct flex_array *fa, int element_nr) +{ + int part_offset = fa_index_inside_part(fa, element_nr); + return part_offset * fa->element_size; +} + +static struct flex_array_part * +__fa_get_part(struct flex_array *fa, int part_nr, gfp_t flags) +{ + struct flex_array_part *part = fa->parts[part_nr]; + if (!part) { + /* + * This leaves the part pages uninitialized + * and with potentially random data, just + * as if the user had kmalloc()'d the whole. + * __GFP_ZERO can be used to zero it. + */ + part = kmalloc(FLEX_ARRAY_PART_SIZE, flags); + if (!part) + return NULL; + fa->parts[part_nr] = part; + } + return part; +} + +/** + * flex_array_put - copy data into the array at @element_nr + * @src: address of data to copy into the array + * @element_nr: index of the position in which to insert + * the new element. + * + * Note that this *copies* the contents of @src into + * the array. If you are trying to store an array of + * pointers, make sure to pass in &ptr instead of ptr. + * + * Locking must be provided by the caller. + */ +int flex_array_put(struct flex_array *fa, int element_nr, void *src, gfp_t flags) +{ + int part_nr = fa_element_to_part_nr(fa, element_nr); + struct flex_array_part *part; + void *dst; + + if (element_nr >= fa->total_nr_elements) + return -ENOSPC; + if (elements_fit_in_base(fa)) + part = (struct flex_array_part *)&fa->parts[0]; + else + part = __fa_get_part(fa, part_nr, flags); + if (!part) + return -ENOMEM; + dst = &part->elements[index_inside_part(fa, element_nr)]; + memcpy(dst, src, fa->element_size); + return 0; +} + +/** + * flex_array_prealloc - guarantee that array space exists + * @start: index of first array element for which space is allocated + * @end: index of last (inclusive) element for which space is allocated + * + * This will guarantee that no future calls to flex_array_put() + * will allocate memory. It can be used if you are expecting to + * be holding a lock or in some atomic context while writing + * data into the array. + * + * Locking must be provided by the caller. + */ +int flex_array_prealloc(struct flex_array *fa, int start, int end, gfp_t flags) +{ + int start_part; + int end_part; + int part_nr; + struct flex_array_part *part; + + if (start >= fa->total_nr_elements || end >= fa->total_nr_elements) + return -ENOSPC; + if (elements_fit_in_base(fa)) + return 0; + start_part = fa_element_to_part_nr(fa, start); + end_part = fa_element_to_part_nr(fa, end); + for (part_nr = start_part; part_nr <= end_part; part_nr++) { + part = __fa_get_part(fa, part_nr, flags); + if (!part) + return -ENOMEM; + } + return 0; +} + +/** + * flex_array_get - pull data back out of the array + * @element_nr: index of the element to fetch from the array + * + * Returns a pointer to the data at index @element_nr. Note + * that this is a copy of the data that was passed in. If you + * are using this to store pointers, you'll get back &ptr. + * + * Locking must be provided by the caller. + */ +void *flex_array_get(struct flex_array *fa, int element_nr) +{ + int part_nr = fa_element_to_part_nr(fa, element_nr); + struct flex_array_part *part; + int index; + + if (element_nr >= fa->total_nr_elements) + return NULL; + if (!fa->parts[part_nr]) + return NULL; + if (elements_fit_in_base(fa)) + part = (struct flex_array_part *)&fa->parts[0]; + else + part = fa->parts[part_nr]; + index = index_inside_part(fa, element_nr); + return &part->elements[index_inside_part(fa, element_nr)]; +} -- cgit v1.2.3 From 8da14b5fc32368f582df09fe9c0bec2507868583 Mon Sep 17 00:00:00 2001 From: Albin Tonnerre Date: Wed, 29 Jul 2009 15:04:18 -0700 Subject: drivers/serial/atmel_serial.c: fix compile when CONFIG_SERIAL_ATMEL=Y and CONFIG_SERIAL_ATMEL_CONSOLE=N When SERIAL_ATMEL_CONSOLE is disabled, ATMEL_CONSOLE_DEVICE is set to NULL, and trying to access ATMEL_CONSOLE_DEVICE->flags in atmel_serial_probe makes the compile fail. This fixes the issue by only accessing it if CONFIG_SERIAL_ATMEL_CONSOLE is defined Signed-off-by: Albin Tonnerre Signed-off-by: Haavard Skinnemoen Cc: Nicolas Ferre Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/serial/atmel_serial.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/serial/atmel_serial.c b/drivers/serial/atmel_serial.c index 338b15c0a54..607d43a3104 100644 --- a/drivers/serial/atmel_serial.c +++ b/drivers/serial/atmel_serial.c @@ -1551,6 +1551,7 @@ static int __devinit atmel_serial_probe(struct platform_device *pdev) if (ret) goto err_add_port; +#ifdef CONFIG_SERIAL_ATMEL_CONSOLE if (atmel_is_console_port(&port->uart) && ATMEL_CONSOLE_DEVICE->flags & CON_ENABLED) { /* @@ -1559,6 +1560,7 @@ static int __devinit atmel_serial_probe(struct platform_device *pdev) */ clk_disable(port->clk); } +#endif device_init_wakeup(&pdev->dev, 1); platform_set_drvdata(pdev, port); -- cgit v1.2.3 From 812ed032cdc8138b7546eecc996879756b92d801 Mon Sep 17 00:00:00 2001 From: Jiri Slaby Date: Wed, 29 Jul 2009 15:04:19 -0700 Subject: uio: mark uio.h functions __KERNEL__ only To avoid userspace build failures such as: .../linux/uio.h:37: error: expected `=', `,', `;', `asm' or `__attribute__' before `iov_length' .../linux/uio.h:47: error: expected declaration specifiers or `...' before `size_t' move uio functions inside a __KERNEL__ block. Signed-off-by: Jiri Slaby Acked-by: Sam Ravnborg Cc: Alexander Viro Cc: Christoph Hellwig Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- include/linux/uio.h | 17 ++++++++--------- 1 file changed, 8 insertions(+), 9 deletions(-) diff --git a/include/linux/uio.h b/include/linux/uio.h index b7fe13883bd..98c114323a8 100644 --- a/include/linux/uio.h +++ b/include/linux/uio.h @@ -19,15 +19,6 @@ struct iovec __kernel_size_t iov_len; /* Must be size_t (1003.1g) */ }; -#ifdef __KERNEL__ - -struct kvec { - void *iov_base; /* and that should *never* hold a userland pointer */ - size_t iov_len; -}; - -#endif - /* * UIO_MAXIOV shall be at least 16 1003.1g (5.4.1.1) */ @@ -35,6 +26,13 @@ struct kvec { #define UIO_FASTIOV 8 #define UIO_MAXIOV 1024 +#ifdef __KERNEL__ + +struct kvec { + void *iov_base; /* and that should *never* hold a userland pointer */ + size_t iov_len; +}; + /* * Total number of bytes covered by an iovec. * @@ -53,5 +51,6 @@ static inline size_t iov_length(const struct iovec *iov, unsigned long nr_segs) } unsigned long iov_shorten(struct iovec *iov, unsigned long nr_segs, size_t to); +#endif #endif -- cgit v1.2.3 From 56d44f05177e69b757a01987827db8ef79fb759c Mon Sep 17 00:00:00 2001 From: Joe Perches Date: Wed, 29 Jul 2009 15:04:20 -0700 Subject: MAINTAINERS: IA64 - pair P:/M: entries properly Signed-off-by: Joe Perches Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- MAINTAINERS | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/MAINTAINERS b/MAINTAINERS index ebc269152fa..5fe36a33ca6 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -2858,8 +2858,8 @@ S: Maintained IA64 (Itanium) PLATFORM P: Tony Luck -P: Fenghua Yu M: tony.luck@intel.com +P: Fenghua Yu M: fenghua.yu@intel.com L: linux-ia64@vger.kernel.org W: http://www.ia64-linux.org/ -- cgit v1.2.3 From 30e10993512c94daf0ab5cb4b512979aa1c85daf Mon Sep 17 00:00:00 2001 From: Joe Perches Date: Wed, 29 Jul 2009 15:04:21 -0700 Subject: MAINTAINERS: Remove ivtv-user lists, add CX18 url Signed-off-by: Joe Perches Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- MAINTAINERS | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) diff --git a/MAINTAINERS b/MAINTAINERS index 5fe36a33ca6..104850879f2 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -1728,10 +1728,10 @@ M: hverkuil@xs4all.nl P: Andy Walls M: awalls@radix.net L: ivtv-devel@ivtvdriver.org -L: ivtv-users@ivtvdriver.org L: linux-media@vger.kernel.org T: git git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6.git W: http://linuxtv.org +W: http://www.ivtvdriver.org/index.php/Cx18 S: Maintained F: Documentation/video4linux/cx18.txt F: drivers/media/video/cx18/ @@ -3283,7 +3283,6 @@ IVTV VIDEO4LINUX DRIVER P: Hans Verkuil M: hverkuil@xs4all.nl L: ivtv-devel@ivtvdriver.org -L: ivtv-users@ivtvdriver.org L: linux-media@vger.kernel.org T: git git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6.git W: http://www.ivtvdriver.org -- cgit v1.2.3 From 4cbfbe256dc0b0491351bc5bea89f229cfae2284 Mon Sep 17 00:00:00 2001 From: Joe Perches Date: Wed, 29 Jul 2009 15:04:21 -0700 Subject: MAINTAINERS: QLGE 10Gb ETHERNET - pair P:/M: entries properly Signed-off-by: Joe Perches Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- MAINTAINERS | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/MAINTAINERS b/MAINTAINERS index 104850879f2..a6d6420d5b1 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -4821,8 +4821,8 @@ F: drivers/net/qla3xxx.* QLOGIC QLGE 10Gb ETHERNET DRIVER P: Ron Mercer -M: linux-driver@qlogic.com M: ron.mercer@qlogic.com +M: linux-driver@qlogic.com L: netdev@vger.kernel.org S: Supported F: drivers/net/qlge/ -- cgit v1.2.3 From 4fc26e36acce714ca26b576e3e6862887fa130d3 Mon Sep 17 00:00:00 2001 From: Joe Perches Date: Wed, 29 Jul 2009 15:04:22 -0700 Subject: MAINTAINERS: Use tabs in ACER ASPIRE ONE Signed-off-by: Joe Perches Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- MAINTAINERS | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-) diff --git a/MAINTAINERS b/MAINTAINERS index a6d6420d5b1..6504fb916a1 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -231,11 +231,11 @@ S: Maintained F: drivers/net/acenic* ACER ASPIRE ONE TEMPERATURE AND FAN DRIVER -P: Peter Feuerer -M: peter@piie.net -W: http://piie.net/?section=acerhdf -S: Maintained -F: drivers/platform/x86/acerhdf.c +P: Peter Feuerer +M: peter@piie.net +W: http://piie.net/?section=acerhdf +S: Maintained +F: drivers/platform/x86/acerhdf.c ACER WMI LAPTOP EXTRAS P: Carlos Corbacho -- cgit v1.2.3 From 5daa2963f8bd51c161d5b244e439e0c9fdec358b Mon Sep 17 00:00:00 2001 From: Joe Perches Date: Wed, 29 Jul 2009 15:04:23 -0700 Subject: MAINTAINERS: Remove L: linux-kernel@vger.kernel.org from sections that should not have them. Signed-off-by: Joe Perches Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- MAINTAINERS | 5 ----- 1 file changed, 5 deletions(-) diff --git a/MAINTAINERS b/MAINTAINERS index 6504fb916a1..7d10f06d088 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -2204,7 +2204,6 @@ F: drivers/scsi/lpfc/ ENE CB710 FLASH CARD READER DRIVER P: Michał Mirosław M: mirq-linux@rere.qmqm.pl -L: linux-kernel@vger.kernel.org S: Maintained F: drivers/misc/cb710/ F: drivers/mmc/host/cb710-mmc.* @@ -3480,13 +3479,11 @@ P: Vegard Nossum M: vegardno@ifi.uio.no P Pekka Enberg M: penberg@cs.helsinki.fi -L: linux-kernel@vger.kernel.org S: Maintained KMEMLEAK P: Catalin Marinas M: catalin.marinas@arm.com -L: linux-kernel@vger.kernel.org S: Maintained F: Documentation/kmemleak.txt F: include/linux/kmemleak.h @@ -4306,7 +4303,6 @@ F: drivers/video/omap/ OMAP MMC SUPPORT P: Jarkko Lavinen M: jarkko.lavinen@nokia.com -L: linux-kernel@vger.kernel.org L: linux-omap@vger.kernel.org S: Maintained F: drivers/mmc/host/*omap* @@ -4588,7 +4584,6 @@ P: Paul Mackerras M: paulus@samba.org P: Ingo Molnar M: mingo@elte.hu -L: linux-kernel@vger.kernel.org S: Supported PERSONALITY HANDLING -- cgit v1.2.3 From eb51b0349df8efccc37fc06aa25aecbd4d39551b Mon Sep 17 00:00:00 2001 From: Joe Perches Date: Wed, 29 Jul 2009 15:04:23 -0700 Subject: MAINTAINERS: Move ARPD to CREDITS Jonathan Layes is hard to find. Signed-off-by: Joe Perches Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- CREDITS | 3 +++ MAINTAINERS | 6 ------ 2 files changed, 3 insertions(+), 6 deletions(-) diff --git a/CREDITS b/CREDITS index e76d300e9fe..44c13d19e7e 100644 --- a/CREDITS +++ b/CREDITS @@ -2006,6 +2006,9 @@ E: paul@laufernet.com D: Soundblaster driver fixes, ISAPnP quirk S: California, USA +N: Jonathan Layes +D: ARPD support + N: Tom Lees E: tom@lpsg.demon.co.uk W: http://www.lpsg.demon.co.uk/ diff --git a/MAINTAINERS b/MAINTAINERS index 7d10f06d088..b42f1b11fa0 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -951,12 +951,6 @@ W: http://www.arm.linux.org.uk/ S: Maintained F: arch/arm/vfp/ -ARPD SUPPORT -P: Jonathan Layes -L: netdev@vger.kernel.org -S: Maintained -F: net/ipv4/arp.c - ASUS ACPI EXTRAS DRIVER P: Corentin Chary M: corentincj@iksaif.net -- cgit v1.2.3 From 24725d1ecf26ba05d74c1cc3ae7467b61a900421 Mon Sep 17 00:00:00 2001 From: Joe Perches Date: Wed, 29 Jul 2009 15:04:24 -0700 Subject: MAINTAINERS: Update KERNEL JANITORS Signed-off-by: Joe Perches Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- MAINTAINERS | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) diff --git a/MAINTAINERS b/MAINTAINERS index b42f1b11fa0..7a22e706852 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -3373,10 +3373,9 @@ F: Makefile F: scripts/Makefile.* KERNEL JANITORS -P: Several L: kernel-janitors@vger.kernel.org W: http://www.kerneljanitors.org/ -S: Maintained +S: Odd fixes KERNEL NFSD, SUNRPC, AND LOCKD SERVERS P: J. Bruce Fields -- cgit v1.2.3 From cabaaf415cc9820cfbf2bc86308b94b78e31fe3e Mon Sep 17 00:00:00 2001 From: Joe Perches Date: Wed, 29 Jul 2009 15:04:24 -0700 Subject: MAINTAINERS: Add PPS patterns Signed-off-by: Joe Perches Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- MAINTAINERS | 3 +++ 1 file changed, 3 insertions(+) diff --git a/MAINTAINERS b/MAINTAINERS index 7a22e706852..b1859597fa2 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -4667,6 +4667,9 @@ M: giometti@enneenne.com W: http://wiki.enneenne.com/index.php/LinuxPPS_support L: linuxpps@ml.enneenne.com (subscribers-only) S: Maintained +F: Documentation/pps/ +F: drivers/pps/ +F: include/linux/pps*.h PREEMPTIBLE KERNEL P: Robert Love -- cgit v1.2.3 From a72f8024f4c9b06ff35d0bf6df479ea7fae4e2f8 Mon Sep 17 00:00:00 2001 From: Joe Perches Date: Wed, 29 Jul 2009 15:04:25 -0700 Subject: MAINTAINERS: USB Serial Digi Acceleport: use separate P: for Al Borchers Signed-off-by: Joe Perches Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- MAINTAINERS | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/MAINTAINERS b/MAINTAINERS index b1859597fa2..b8d6bd35563 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -6105,8 +6105,9 @@ S: Maintained F: drivers/usb/serial/cyberjack.c USB SERIAL DIGI ACCELEPORT DRIVER -P: Peter Berger and Al Borchers +P: Peter Berger M: pberger@brimson.com +P: Al Borchers M: alborchers@steinerpoint.com L: linux-usb@vger.kernel.org S: Maintained -- cgit v1.2.3 From 5bee73ff71e17f5a807376e29653998755211ceb Mon Sep 17 00:00:00 2001 From: Joe Perches Date: Wed, 29 Jul 2009 15:04:25 -0700 Subject: MAINTAINERS: INPUT: Add Dmitry's name to his email address Signed-off-by: Joe Perches Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- MAINTAINERS | 1 + 1 file changed, 1 insertion(+) diff --git a/MAINTAINERS b/MAINTAINERS index b8d6bd35563..6ef63194996 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -2979,6 +2979,7 @@ F: include/linux/inotify.h INPUT (KEYBOARD, MOUSE, JOYSTICK, TOUCHSCREEN) DRIVERS P: Dmitry Torokhov M: dmitry.torokhov@gmail.com +P: Dmitry Torokhov M: dtor@mail.ru L: linux-input@vger.kernel.org T: git git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input.git -- cgit v1.2.3 From 9ae9a7f119a8def8e68d7f5ab0d96b3aba80accb Mon Sep 17 00:00:00 2001 From: Joe Perches Date: Wed, 29 Jul 2009 15:04:26 -0700 Subject: MAINTAINERS: Remove CS461x sound card section Thomas Woller's email address bounces Nils Faerber isn't active Added Thomas Woller to CREDITS, Nils already has an entry Signed-off-by: Joe Perches Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- CREDITS | 3 +++ MAINTAINERS | 9 --------- 2 files changed, 3 insertions(+), 9 deletions(-) diff --git a/CREDITS b/CREDITS index 44c13d19e7e..1a41bf4addd 100644 --- a/CREDITS +++ b/CREDITS @@ -3805,6 +3805,9 @@ S: van Bronckhorststraat 12 S: 2612 XV Delft S: The Netherlands +N: Thomas Woller +D: CS461x Cirrus Logic sound driver + N: David Woodhouse E: dwmw2@infradead.org D: JFFS2 file system, Memory Technology Device subsystem, diff --git a/MAINTAINERS b/MAINTAINERS index 6ef63194996..1b02be36d96 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -1508,15 +1508,6 @@ L: alsa-devel@alsa-project.org (moderated for non-subscribers) S: Supported F: sound/soc/codecs/cs4270* -CIRRUS LOGIC CS4280/CS461x SOUNDDRIVER -P: Cirrus Logic Corporation (kernel 2.2 driver) -M: Cirrus Logic Corporation, Thomas Woller -P: Nils Faerber (port to kernel 2.4) -M: Nils Faerber -S: Maintained -F: Documentation/input/cs461x.txt -F: sound/pci/cs46xx/ - CLK API P: Russell King M: linux@arm.linux.org.uk -- cgit v1.2.3 From edf4b0a980bf481bbcef0977e2c7369f13f3428f Mon Sep 17 00:00:00 2001 From: Joe Perches Date: Wed, 29 Jul 2009 15:04:26 -0700 Subject: MAINTAINERS: QLOGIC QLA2XXX - add Andrew Vasquez email address Signed-off-by: Joe Perches Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- MAINTAINERS | 1 + 1 file changed, 1 insertion(+) diff --git a/MAINTAINERS b/MAINTAINERS index 1b02be36d96..8ca15f6a460 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -4788,6 +4788,7 @@ S: Maintained QLOGIC QLA2XXX FC-SCSI DRIVER P: Andrew Vasquez +M: andrew.vasquez@qlogic.com M: linux-driver@qlogic.com L: linux-scsi@vger.kernel.org S: Supported -- cgit v1.2.3 From 2bd1944899354b6f1328fe84886fa8f4d5918aef Mon Sep 17 00:00:00 2001 From: Joe Perches Date: Wed, 29 Jul 2009 15:04:27 -0700 Subject: MAINTAINERS: QLOGIC QLA3XXX - Add Ron Mercer email address Signed-off-by: Joe Perches Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- MAINTAINERS | 1 + 1 file changed, 1 insertion(+) diff --git a/MAINTAINERS b/MAINTAINERS index 8ca15f6a460..4daf259782e 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -4797,6 +4797,7 @@ F: drivers/scsi/qla2xxx/ QLOGIC QLA3XXX NETWORK DRIVER P: Ron Mercer +M: ron.mercer@qlogic.com M: linux-driver@qlogic.com L: netdev@vger.kernel.org S: Supported -- cgit v1.2.3 From 82c4dfc76200055bd2ae600a08404c10df5f4ff6 Mon Sep 17 00:00:00 2001 From: Joe Perches Date: Wed, 29 Jul 2009 15:04:27 -0700 Subject: MAINTAINERS: Scott Murray is no longer with SomaNetworks Signed-off-by: Joe Perches Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- MAINTAINERS | 9 +++------ 1 file changed, 3 insertions(+), 6 deletions(-) diff --git a/MAINTAINERS b/MAINTAINERS index 4daf259782e..e4e3471cd0e 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -1546,26 +1546,23 @@ F: fs/cifs/ COMPACTPCI HOTPLUG CORE P: Scott Murray -M: scottm@somanetworks.com M: scott@spiteful.org L: linux-pci@vger.kernel.org -S: Supported +S: Maintained F: drivers/pci/hotplug/cpci_hotplug* COMPACTPCI HOTPLUG ZIATECH ZT5550 DRIVER P: Scott Murray -M: scottm@somanetworks.com M: scott@spiteful.org L: linux-pci@vger.kernel.org -S: Supported +S: Maintained F: drivers/pci/hotplug/cpcihp_zt5550.* COMPACTPCI HOTPLUG GENERIC DRIVER P: Scott Murray -M: scottm@somanetworks.com M: scott@spiteful.org L: linux-pci@vger.kernel.org -S: Supported +S: Maintained F: drivers/pci/hotplug/cpcihp_generic.c COMPAL LAPTOP SUPPORT -- cgit v1.2.3 From 870020f93af2323a81f179091a0780dc1d5b916b Mon Sep 17 00:00:00 2001 From: Joe Perches Date: Wed, 29 Jul 2009 15:04:28 -0700 Subject: scripts/get_maintainer.pl: Add -f directory use Don't require a specific file in a directory to be tested. Also Arnd Bergmann pointed out that the MAINTAINERS pattern requirement that directory patterns have a trailing slash was unnecessary and was likely to be error prone. Removed that requirement. Signed-off-by: Joe Perches Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- scripts/get_maintainer.pl | 23 +++++++++++++++++++---- 1 file changed, 19 insertions(+), 4 deletions(-) diff --git a/scripts/get_maintainer.pl b/scripts/get_maintainer.pl index 3e733146cd5..7fc09fc91e8 100755 --- a/scripts/get_maintainer.pl +++ b/scripts/get_maintainer.pl @@ -13,7 +13,7 @@ use strict; my $P = $0; -my $V = '0.16'; +my $V = '0.17'; use Getopt::Long qw(:config no_auto_abbrev); @@ -132,6 +132,10 @@ while () { $value =~ s@\.@\\\.@g; ##Convert . to \. $value =~ s/\*/\.\*/g; ##Convert * to .* $value =~ s/\?/\./g; ##Convert ? to . + ##if pattern is a directory and it lacks a trailing slash, add one + if ((-d $value)) { + $value =~ s@([^/])$@$1/@; + } } push(@typevalue, "$type:$value"); } elsif (!/^(\s)*$/) { @@ -146,8 +150,10 @@ close(MAINT); my @files = (); foreach my $file (@ARGV) { - next if ((-d $file)); - if (!(-f $file)) { + ##if $file is a directory and it lacks a trailing slash, add one + if ((-d $file)) { + $file =~ s@([^/])$@$1/@; + } elsif (!(-f $file)) { die "$P: file '${file}' not found\n"; } if ($from_filename) { @@ -292,7 +298,7 @@ sub file_match_pattern { sub usage { print < show version --help => show this help information +Notes: + Using "-f directory" may give unexpected results: + + Used with "--git", git signators for _all_ files in and below + directory are examined as git recurses directories. + Any specified X: (exclude) pattern matches are _not_ ignored. + Used with "--nogit", directory is used as a pattern match, + no individual file within the directory or subdirectory + is matched. EOT } -- cgit v1.2.3 From afa81ee13033de791c41c1d9333853504653939b Mon Sep 17 00:00:00 2001 From: Joe Perches Date: Wed, 29 Jul 2009 15:04:28 -0700 Subject: get_maintainer.pl: Add git-min-percent option Allow an option to control the minimum percentage of sign-offs required before being considered a maintainer. git-min-percent has a default value of 5 Signed-off-by: Joe Perches Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- scripts/get_maintainer.pl | 19 ++++++++++++++++--- 1 file changed, 16 insertions(+), 3 deletions(-) diff --git a/scripts/get_maintainer.pl b/scripts/get_maintainer.pl index 7fc09fc91e8..61ef27564ed 100755 --- a/scripts/get_maintainer.pl +++ b/scripts/get_maintainer.pl @@ -27,6 +27,7 @@ my $email_git = 1; my $email_git_penguin_chiefs = 0; my $email_git_min_signatures = 1; my $email_git_max_maintainers = 5; +my $email_git_min_percent = 5; my $email_git_since = "1-year-ago"; my $output_multiline = 1; my $output_separator = ", "; @@ -65,6 +66,7 @@ if (!GetOptions( 'git-chief-penguins!' => \$email_git_penguin_chiefs, 'git-min-signatures=i' => \$email_git_min_signatures, 'git-max-maintainers=i' => \$email_git_max_maintainers, + 'git-min-percent=i' => \$email_git_min_percent, 'git-since=s' => \$email_git_since, 'm!' => \$email_maintainer, 'n!' => \$email_usename, @@ -307,6 +309,7 @@ MAINTAINER field selection options: --git-chief-penguins => include ${penguin_chiefs} --git-min-signatures => number of signatures required (default: 1) --git-max-maintainers => maximum maintainers to add (default: 5) + --git-min-percent => minimum percentage of commits required (default: 0) --git-since => git history to use (default: 1-year-ago) --m => include maintainer(s) if any --n => include name 'Full Name ' @@ -497,6 +500,7 @@ sub recent_git_signoffs { my $output = ""; my $count = 0; my @lines = (); + my $total_sign_offs; if (which("git") eq "") { warn("$P: git not found. Add --nogit to options?\n"); @@ -520,17 +524,26 @@ sub recent_git_signoffs { $output =~ s/^\s*//gm; @lines = split("\n", $output); + + $total_sign_offs = 0; + foreach my $line (@lines) { + if ($line =~ m/([0-9]+)\s+(.*)/) { + $total_sign_offs += $1; + } else { + die("$P: Unexpected git output: ${line}\n"); + } + } + foreach my $line (@lines) { if ($line =~ m/([0-9]+)\s+(.*)/) { my $sign_offs = $1; $line = $2; $count++; if ($sign_offs < $email_git_min_signatures || - $count > $email_git_max_maintainers) { + $count > $email_git_max_maintainers || + $sign_offs * 100 / $total_sign_offs < $email_git_min_percent) { last; } - } else { - die("$P: Unexpected git output: ${line}\n"); } if ($line =~ m/(.+)<(.+)>/) { my $git_name = $1; -- cgit v1.2.3 From 3d202aeb7b7b33d5a5b2040ee5af5b309782941c Mon Sep 17 00:00:00 2001 From: Joe Perches Date: Wed, 29 Jul 2009 15:04:29 -0700 Subject: get_maintainerpl-add-git-min-percent-option-fix Allow an option to control the minimum percentage of sign-offs required before being considered a maintainer. git-min-percent has a default value of 5 Signed-off-by: Joe Perches Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- scripts/get_maintainer.pl | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/scripts/get_maintainer.pl b/scripts/get_maintainer.pl index 61ef27564ed..278a45bd45a 100755 --- a/scripts/get_maintainer.pl +++ b/scripts/get_maintainer.pl @@ -309,7 +309,7 @@ MAINTAINER field selection options: --git-chief-penguins => include ${penguin_chiefs} --git-min-signatures => number of signatures required (default: 1) --git-max-maintainers => maximum maintainers to add (default: 5) - --git-min-percent => minimum percentage of commits required (default: 0) + --git-min-percent => minimum percentage of commits required (default: 5) --git-since => git history to use (default: 1-year-ago) --m => include maintainer(s) if any --n => include name 'Full Name ' -- cgit v1.2.3 From 8b58be884a9fd650abb7f7adf3f885fb9cecd79d Mon Sep 17 00:00:00 2001 From: Joe Perches Date: Wed, 29 Jul 2009 15:04:30 -0700 Subject: MAINTAINERS: coalesce name and email address lines Switch the MAINTAINERS email address format from P: Linus Torvalds M: torvalds@linux-foundation.org to M: Linus Torvalds Mainly to ease the copy-n-pasting of maitnainer addresses into email clients. The script to perform this operation: #! /bin/sh # # Change MAINTAINERS from # P: name # M: address # to: # M: name
# # Integrate P: and M: lines # perl -i -e 'local $/; while(<>) { s@P: ([^\n]+)\nM: ([^\n]+)\n@M: \1 <\2>\n@g; print; }' MAINTAINERS # # Quote names with periods, commas and parentheses # sed -r -i -e "s/^M: (.+)([\.,'\(])(.*) Acked-by: Pavel Machek Acked-by: Randy Dunlap Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- MAINTAINERS | 2721 ++++++++++++++++++++--------------------------------------- 1 file changed, 907 insertions(+), 1814 deletions(-) diff --git a/MAINTAINERS b/MAINTAINERS index e4e3471cd0e..a013e963fc0 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -104,67 +104,58 @@ X: Files and directories that are NOT maintained, same rules as F: matches all files in and below net excluding net/ipv6/ 3C505 NETWORK DRIVER -P: Philip Blundell -M: philb@gnu.org +M: Philip Blundell L: netdev@vger.kernel.org S: Maintained F: drivers/net/3c505* 3C59X NETWORK DRIVER -P: Steffen Klassert -M: klassert@mathematik.tu-chemnitz.de +M: Steffen Klassert L: netdev@vger.kernel.org S: Maintained F: Documentation/networking/vortex.txt F: drivers/net/3c59x.c 3CR990 NETWORK DRIVER -P: David Dillow -M: dave@thedillows.org +M: David Dillow L: netdev@vger.kernel.org S: Maintained F: drivers/net/typhoon* 3W-9XXX SATA-RAID CONTROLLER DRIVER -P: Adam Radford -M: linuxraid@amcc.com +M: Adam Radford L: linux-scsi@vger.kernel.org W: http://www.amcc.com S: Supported F: drivers/scsi/3w-9xxx* 3W-XXXX ATA-RAID CONTROLLER DRIVER -P: Adam Radford -M: linuxraid@amcc.com +M: Adam Radford L: linux-scsi@vger.kernel.org W: http://www.amcc.com S: Supported F: drivers/scsi/3w-xxxx* 53C700 AND 53C700-66 SCSI DRIVER -P: James E.J. Bottomley -M: James.Bottomley@HansenPartnership.com +M: "James E.J. Bottomley" L: linux-scsi@vger.kernel.org S: Maintained F: drivers/scsi/53c700* 6PACK NETWORK DRIVER FOR AX.25 -P: Andreas Koensgen -M: ajk@comnets.uni-bremen.de +M: Andreas Koensgen L: linux-hams@vger.kernel.org S: Maintained F: drivers/net/hamradio/6pack.c 8169 10/100/1000 GIGABIT ETHERNET DRIVER -P: Francois Romieu -M: romieu@fr.zoreil.com +M: Francois Romieu L: netdev@vger.kernel.org S: Maintained F: drivers/net/r8169.c 8250/16?50 (AND CLONE UARTS) SERIAL DRIVER -P: Alan Cox -M: alan@lxorguk.ukuu.org.uk +M: Alan Cox L: linux-serial@vger.kernel.org W: http://serial.sourceforge.net S: Odd Fixes @@ -172,20 +163,16 @@ F: drivers/serial/8250* F: include/linux/serial_8250.h 8390 NETWORK DRIVERS [WD80x3/SMC-ELITE, SMC-ULTRA, NE2000, 3C503, etc.] -P: Paul Gortmaker -M: p_gortmaker@yahoo.com +M: Paul Gortmaker L: netdev@vger.kernel.org S: Maintained F: drivers/net/*8390* F: drivers/net/ax88796.c 9P FILE SYSTEM -P: Eric Van Hensbergen -M: ericvh@gmail.com -P: Ron Minnich -M: rminnich@sandia.gov -P: Latchesar Ionkov -M: lucho@ionkov.net +M: Eric Van Hensbergen +M: Ron Minnich +M: Latchesar Ionkov L: v9fs-developer@lists.sourceforge.net W: http://swik.net/v9fs T: git git://git.kernel.org/pub/scm/linux/kernel/ericvh/v9fs.git @@ -194,15 +181,13 @@ F: Documentation/filesystems/9p.txt F: fs/9p/ A2232 SERIAL BOARD DRIVER -P: Enver Haase -M: A2232@gmx.net +M: Enver Haase L: linux-m68k@lists.linux-m68k.org S: Maintained F: drivers/char/ser_a2232* AACRAID SCSI RAID DRIVER -P: Adaptec OEM Raid Solutions -M: aacraid@adaptec.com +M: Adaptec OEM Raid Solutions L: linux-scsi@vger.kernel.org W: http://www.adaptec.com/ S: Supported @@ -210,44 +195,38 @@ F: Documentation/scsi/aacraid.txt F: drivers/scsi/aacraid/ ABIT UGURU 1,2 HARDWARE MONITOR DRIVER -P: Hans de Goede -M: j.w.r.degoede@hhs.nl +M: Hans de Goede L: lm-sensors@lm-sensors.org S: Maintained F: drivers/hwmon/abituguru.c ABIT UGURU 3 HARDWARE MONITOR DRIVER -P: Alistair John Strachan -M: alistair@devzero.co.uk +M: Alistair John Strachan L: lm-sensors@lm-sensors.org S: Maintained F: drivers/hwmon/abituguru3.c ACENIC DRIVER -P: Jes Sorensen -M: jes@trained-monkey.org +M: Jes Sorensen L: linux-acenic@sunsite.dk S: Maintained F: drivers/net/acenic* ACER ASPIRE ONE TEMPERATURE AND FAN DRIVER -P: Peter Feuerer -M: peter@piie.net +M: Peter Feuerer W: http://piie.net/?section=acerhdf S: Maintained F: drivers/platform/x86/acerhdf.c ACER WMI LAPTOP EXTRAS -P: Carlos Corbacho -M: carlos@strangeworlds.co.uk +M: Carlos Corbacho L: aceracpi@googlegroups.com (subscribers-only) W: http://code.google.com/p/aceracpi S: Maintained F: drivers/platform/x86/acer-wmi.c ACPI -P: Len Brown -M: lenb@kernel.org +M: Len Brown L: linux-acpi@vger.kernel.org W: http://www.lesswatts.org/projects/acpi/ T: git git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-acpi-2.6.git @@ -257,8 +236,7 @@ F: drivers/pnp/pnpacpi/ F: include/linux/acpi.h ACPI BATTERY DRIVERS -P: Alexey Starikovskiy -M: astarikovskiy@suse.de +M: Alexey Starikovskiy L: linux-acpi@vger.kernel.org W: http://www.lesswatts.org/projects/acpi/ S: Supported @@ -266,80 +244,69 @@ F: drivers/acpi/battery.c F: drivers/acpi/*sbs* ACPI EC DRIVER -P: Alexey Starikovskiy -M: astarikovskiy@suse.de +M: Alexey Starikovskiy L: linux-acpi@vger.kernel.org W: http://www.lesswatts.org/projects/acpi/ S: Supported F: drivers/acpi/ec.c ACPI FAN DRIVER -P: Zhang Rui -M: rui.zhang@intel.com +M: Zhang Rui L: linux-acpi@vger.kernel.org W: http://www.lesswatts.org/projects/acpi/ S: Supported F: drivers/acpi/fan.c ACPI PCI HOTPLUG DRIVER -P: Kristen Carlson Accardi -M: kristen.c.accardi@intel.com +M: Kristen Carlson Accardi L: linux-pci@vger.kernel.org S: Supported F: drivers/pci/hotplug/acpi* ACPI THERMAL DRIVER -P: Zhang Rui -M: rui.zhang@intel.com +M: Zhang Rui L: linux-acpi@vger.kernel.org W: http://www.lesswatts.org/projects/acpi/ S: Supported F: drivers/acpi/*thermal* ACPI VIDEO DRIVER -P: Zhang Rui -M: rui.zhang@intel.com +M: Zhang Rui L: linux-acpi@vger.kernel.org W: http://www.lesswatts.org/projects/acpi/ S: Supported F: drivers/acpi/video.c ACPI WMI DRIVER -P: Carlos Corbacho -M: carlos@strangeworlds.co.uk +M: Carlos Corbacho L: linux-acpi@vger.kernel.org W: http://www.lesswatts.org/projects/acpi/ S: Maintained F: drivers/platform/x86/wmi.c AD1889 ALSA SOUND DRIVER -P: Kyle McMartin -M: kyle@mcmartin.ca -P: Thibaut Varene -M: T-Bone@parisc-linux.org +M: Kyle McMartin +M: Thibaut Varene W: http://wiki.parisc-linux.org/AD1889 L: linux-parisc@vger.kernel.org S: Maintained F: sound/pci/ad1889.* ADM1025 HARDWARE MONITOR DRIVER -P: Jean Delvare -M: khali@linux-fr.org +M: Jean Delvare L: lm-sensors@lm-sensors.org S: Maintained F: Documentation/hwmon/adm1025 F: drivers/hwmon/adm1025.c ADM1029 HARDWARE MONITOR DRIVER -P: Corentin Labbe -M: corentin.labbe@geomatys.fr +M: Corentin Labbe L: lm-sensors@lm-sensors.org S: Maintained F: drivers/hwmon/adm1029.c ADM8211 WIRELESS DRIVER -P: Michael Wu -M: flamingice@sourmilk.net +M: Michael Wu L: linux-wireless@vger.kernel.org W: http://linuxwireless.org/ T: git git://git.kernel.org/pub/scm/linux/kernel/git/mwu/mac80211-drivers.git @@ -347,35 +314,30 @@ S: Maintained F: drivers/net/wireless/adm8211.* ADT746X FAN DRIVER -P: Colin Leroy -M: colin@colino.net +M: Colin Leroy S: Maintained F: drivers/macintosh/therm_adt746x.c ADVANSYS SCSI DRIVER -P: Matthew Wilcox -M: matthew@wil.cx +M: Matthew Wilcox L: linux-scsi@vger.kernel.org S: Maintained F: Documentation/scsi/advansys.txt F: drivers/scsi/advansys.c AEDSP16 DRIVER -P: Riccardo Facchetti -M: fizban@tin.it +M: Riccardo Facchetti S: Maintained F: sound/oss/aedsp16.c AFFS FILE SYSTEM -P: Roman Zippel -M: zippel@linux-m68k.org +M: Roman Zippel S: Maintained F: Documentation/filesystems/affs.txt F: fs/affs/ AFS FILESYSTEM & AF_RXRPC SOCKET DOMAIN -P: David Howells -M: dhowells@redhat.com +M: David Howells L: linux-afs@lists.infradead.org S: Supported F: fs/afs/ @@ -383,40 +345,35 @@ F: include/net/af_rxrpc.h F: net/rxrpc/af_rxrpc.c AGPGART DRIVER -P: David Airlie -M: airlied@linux.ie +M: David Airlie T: git git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6.git S: Maintained F: drivers/char/agp/ F: include/linux/agp* AHA152X SCSI DRIVER -P: Juergen E. Fischer -M: fischer@norbit.de +M: "Juergen E. Fischer" L: linux-scsi@vger.kernel.org S: Maintained F: drivers/scsi/aha152x* F: drivers/scsi/pcmcia/aha152x* AIC7XXX / AIC79XX SCSI DRIVER -P: Hannes Reinecke -M: hare@suse.de +M: Hannes Reinecke L: linux-scsi@vger.kernel.org S: Maintained F: drivers/scsi/aic7xxx/ F: drivers/scsi/aic7xxx_old/ AIO -P: Benjamin LaHaise -M: bcrl@kvack.org +M: Benjamin LaHaise L: linux-aio@kvack.org S: Supported F: fs/aio.c F: include/linux/*aio*.h ALCATEL SPEEDTOUCH USB DRIVER -P: Duncan Sands -M: duncan.sands@free.fr +M: Duncan Sands L: linux-usb@vger.kernel.org W: http://www.linux-usb.org/SpeedTouch/ S: Maintained @@ -424,32 +381,27 @@ F: drivers/usb/atm/speedtch.c F: drivers/usb/atm/usbatm.c ALCHEMY AU1XX0 MMC DRIVER -P: Manuel Lauss -M: manuel.lauss@gmail.com +M: Manuel Lauss S: Maintained F: drivers/mmc/host/au1xmmc.c ALI1563 I2C DRIVER -P: Rudolf Marek -M: r.marek@assembler.cz +M: Rudolf Marek L: linux-i2c@vger.kernel.org S: Maintained F: Documentation/i2c/busses/i2c-ali1563 F: drivers/i2c/busses/i2c-ali1563.c ALPHA PORT -P: Richard Henderson -M: rth@twiddle.net +M: Richard Henderson S: Odd Fixes for 2.4; Maintained for 2.6. -P: Ivan Kokshaysky -M: ink@jurassic.park.msu.ru +M: Ivan Kokshaysky S: Maintained for 2.4; PCI support for 2.6. L: linux-alpha@vger.kernel.org F: arch/alpha/ AMD GEODE CS5536 USB DEVICE CONTROLLER DRIVER -P: Thomas Dahlmann -M: dahlmann.thomas@arcor.de +M: Thomas Dahlmann L: linux-geode@lists.infradead.org (moderated for non-subscribers) S: Supported F: drivers/usb/gadget/amd5536udc.* @@ -466,8 +418,7 @@ F: drivers/video/geode/ F: arch/x86/include/asm/geode.h AMD IOMMU (AMD-VI) -P: Joerg Roedel -M: joerg.roedel@amd.com +M: Joerg Roedel L: iommu@lists.linux-foundation.org T: git git://git.kernel.org/pub/scm/linux/kernel/git/joro/linux-2.6-iommu.git S: Supported @@ -475,40 +426,33 @@ F: arch/x86/kernel/amd_iommu*.c F: arch/x86/include/asm/amd_iommu*.h AMD MICROCODE UPDATE SUPPORT -P: Andreas Herrmann -M: andreas.herrmann3@amd.com +M: Andreas Herrmann L: amd64-microcode@amd64.org S: Supported F: arch/x86/kernel/microcode_amd.c AMS (Apple Motion Sensor) DRIVER -P: Stelian Pop -M: stelian@popies.net -P: Michael Hanselmann -M: linux-kernel@hansmi.ch +M: Stelian Pop +M: Michael Hanselmann S: Supported F: drivers/hwmon/ams/ AMSO1100 RNIC DRIVER -P: Tom Tucker -M: tom@opengridcomputing.com -P: Steve Wise -M: swise@opengridcomputing.com +M: Tom Tucker +M: Steve Wise L: general@lists.openfabrics.org S: Maintained F: drivers/infiniband/hw/amso1100/ AOA (Apple Onboard Audio) ALSA DRIVER -P: Johannes Berg -M: johannes@sipsolutions.net +M: Johannes Berg L: linuxppc-dev@ozlabs.org L: alsa-devel@alsa-project.org (moderated for non-subscribers) S: Maintained F: sound/aoa/ APM DRIVER -P: Stephen Rothwell -M: sfr@canb.auug.org.au +M: Stephen Rothwell L: linux-laptop@vger.kernel.org W: http://www.canb.auug.org.au/~sfr/ S: Supported @@ -516,51 +460,44 @@ F: arch/x86/kernel/apm_32.c F: include/linux/apm_bios.h APPLE BCM5974 MULTITOUCH DRIVER -P: Henrik Rydberg -M: rydberg@euromail.se +M: Henrik Rydberg L: linux-input@vger.kernel.org S: Maintained F: drivers/input/mouse/bcm5974.c APPLE SMC DRIVER -P: Nicolas Boichat -M: nicolas@boichat.ch +M: Nicolas Boichat L: mactel-linux-devel@lists.sourceforge.net S: Maintained F: drivers/hwmon/applesmc.c APPLETALK NETWORK LAYER -P: Arnaldo Carvalho de Melo -M: acme@ghostprotocols.net +M: Arnaldo Carvalho de Melo S: Maintained F: drivers/net/appletalk/ F: net/appletalk/ APPLETOUCH TOUCHPAD DRIVER -P: Johannes Berg -M: johannes@sipsolutions.net +M: Johannes Berg L: linux-input@vger.kernel.org S: Maintained F: Documentation/input/appletouch.txt F: drivers/input/mouse/appletouch.c ARC FRAMEBUFFER DRIVER -P: Jaya Kumar -M: jayalk@intworks.biz +M: Jaya Kumar S: Maintained F: drivers/video/arcfb.c F: drivers/video/fb_defio.c ARM MFM AND FLOPPY DRIVERS -P: Ian Molton -M: spyro@f2s.com +M: Ian Molton S: Maintained F: arch/arm/lib/floppydma.S F: arch/arm/include/asm/floppy.h ARM PORT -P: Russell King -M: linux@arm.linux.org.uk +M: Russell King L: linux-arm-kernel@lists.arm.linux.org.uk (subscribers-only) W: http://www.arm.linux.org.uk/ S: Maintained @@ -571,79 +508,67 @@ S: Orphan F: drivers/mmc/host/mmci.* ARM/ADI ROADRUNNER MACHINE SUPPORT -P: Lennert Buytenhek -M: kernel@wantstofly.org +M: Lennert Buytenhek L: linux-arm-kernel@lists.arm.linux.org.uk (subscribers-only) S: Maintained F: arch/arm/mach-ixp23xx/ F: arch/arm/mach-ixp23xx/include/mach/ ARM/ADS SPHERE MACHINE SUPPORT -P: Lennert Buytenhek -M: kernel@wantstofly.org +M: Lennert Buytenhek L: linux-arm-kernel@lists.arm.linux.org.uk (subscribers-only) S: Maintained ARM/AFEB9260 MACHINE SUPPORT -P: Sergey Lapin -M: slapin@ossfans.org +M: Sergey Lapin L: linux-arm-kernel@lists.arm.linux.org.uk (subscribers-only) S: Maintained ARM/AJECO 1ARM MACHINE SUPPORT -P: Lennert Buytenhek -M: kernel@wantstofly.org +M: Lennert Buytenhek L: linux-arm-kernel@lists.arm.linux.org.uk (subscribers-only) S: Maintained ARM/ATMEL AT91RM9200 ARM ARCHITECTURE -P: Andrew Victor -M: linux@maxim.org.za +M: Andrew Victor L: linux-arm-kernel@lists.arm.linux.org.uk (subscribers-only) W: http://maxim.org.za/at91_26.html S: Maintained ARM/CIRRUS LOGIC EP93XX ARM ARCHITECTURE -P: Lennert Buytenhek -M: kernel@wantstofly.org +M: Lennert Buytenhek L: linux-arm-kernel@lists.arm.linux.org.uk (subscribers-only) S: Maintained ARM/CIRRUS LOGIC EDB9315A MACHINE SUPPORT -P: Lennert Buytenhek -M: kernel@wantstofly.org +M: Lennert Buytenhek L: linux-arm-kernel@lists.arm.linux.org.uk (subscribers-only) S: Maintained ARM/CLKDEV SUPPORT -P: Russell King -M: linux@arm.linux.org.uk +M: Russell King L: linux-arm-kernel@lists.arm.linux.org.uk (subscribers-only) F: arch/arm/common/clkdev.c F: arch/arm/include/asm/clkdev.h ARM/COMPULAB CM-X270/EM-X270 and CM-X300 MACHINE SUPPORT -P: Mike Rapoport -M: mike@compulab.co.il +M: Mike Rapoport L: linux-arm-kernel@lists.arm.linux.org.uk (subscribers-only) S: Maintained ARM/CORGI MACHINE SUPPORT -P: Richard Purdie -M: rpurdie@rpsys.net +M: Richard Purdie S: Maintained ARM/CORTINA SYSTEMS GEMINI ARM ARCHITECTURE -P: Paulius Zaleckas -M: paulius.zaleckas@teltonika.lt +M: Paulius Zaleckas L: linux-arm-kernel@lists.arm.linux.org.uk (subscribers-only) T: git git://gitorious.org/linux-gemini/mainline.git S: Maintained F: arch/arm/mach-gemini/ ARM/EBSA110 MACHINE SUPPORT -P: Russell King -M: linux@arm.linux.org.uk +M: Russell King L: linux-arm-kernel@lists.arm.linux.org.uk (subscribers-only) W: http://www.arm.linux.org.uk/ S: Maintained @@ -651,12 +576,9 @@ F: arch/arm/mach-ebsa110/ F: drivers/net/arm/am79c961a.* ARM/EZX SMARTPHONES (A780, A910, A1200, E680, ROKR E2 and ROKR E6) -P: Daniel Ribeiro -M: drwyrm@gmail.com -P: Stefan Schmidt -M: stefan@openezx.org -P: Harald Welte -M: laforge@openezx.org +M: Daniel Ribeiro +M: Stefan Schmidt +M: Harald Welte L: openezx-devel@lists.openezx.org (subscribers-only) W: http://www.openezx.org/ S: Maintained @@ -664,15 +586,13 @@ T: topgit git://git.openezx.org/openezx.git F: arch/arm/mach-pxa/ezx.c ARM/FARADAY FA526 PORT -P: Paulius Zaleckas -M: paulius.zaleckas@teltonika.lt +M: Paulius Zaleckas L: linux-arm-kernel@lists.arm.linux.org.uk (subscribers-only) S: Maintained F: arch/arm/mm/*-fa* ARM/FOOTBRIDGE ARCHITECTURE -P: Russell King -M: linux@arm.linux.org.uk +M: Russell King L: linux-arm-kernel@lists.arm.linux.org.uk (subscribers-only) W: http://www.arm.linux.org.uk/ S: Maintained @@ -680,175 +600,143 @@ F: arch/arm/include/asm/hardware/dec21285.h F: arch/arm/mach-footbridge/ ARM/FREESCALE IMX / MXC ARM ARCHITECTURE -P: Sascha Hauer -M: kernel@pengutronix.de +M: Sascha Hauer L: linux-arm-kernel@lists.arm.linux.org.uk (subscribers-only) S: Maintained ARM/GLOMATION GESBC9312SX MACHINE SUPPORT -P: Lennert Buytenhek -M: kernel@wantstofly.org +M: Lennert Buytenhek L: linux-arm-kernel@lists.arm.linux.org.uk (subscribers-only) S: Maintained ARM/GUMSTIX MACHINE SUPPORT -P: Steve Sakoman -M: sakoman@gmail.com +M: Steve Sakoman L: linux-arm-kernel@lists.arm.linux.org.uk (subscribers-only) S: Maintained ARM/H4700 (HP IPAQ HX4700) MACHINE SUPPORT -P: Philipp Zabel -M: philipp.zabel@gmail.com +M: Philipp Zabel S: Maintained F: arch/arm/mach-pxa/hx4700.c F: arch/arm/mach-pxa/include/mach/hx4700.h ARM/HP JORNADA 7XX MACHINE SUPPORT -P: Kristoffer Ericson -M: kristoffer.ericson@gmail.com +M: Kristoffer Ericson W: www.jlime.com S: Maintained ARM/INTEL IOP32X ARM ARCHITECTURE -P: Lennert Buytenhek -M: kernel@wantstofly.org -P: Dan Williams -M: dan.j.williams@intel.com +M: Lennert Buytenhek +M: Dan Williams L: linux-arm-kernel@lists.arm.linux.org.uk (subscribers-only) S: Supported ARM/INTEL IOP33X ARM ARCHITECTURE -P: Dan Williams -M: dan.j.williams@intel.com +M: Dan Williams L: linux-arm-kernel@lists.arm.linux.org.uk (subscribers-only) S: Supported ARM/INTEL IOP13XX ARM ARCHITECTURE -P: Lennert Buytenhek -M: kernel@wantstofly.org -P: Dan Williams -M: dan.j.williams@intel.com +M: Lennert Buytenhek +M: Dan Williams L: linux-arm-kernel@lists.arm.linux.org.uk (subscribers-only) S: Supported ARM/INTEL IQ81342EX MACHINE SUPPORT -P: Lennert Buytenhek -M: kernel@wantstofly.org -P: Dan Williams -M: dan.j.williams@intel.com +M: Lennert Buytenhek +M: Dan Williams L: linux-arm-kernel@lists.arm.linux.org.uk (subscribers-only) S: Supported ARM/INTEL IXP2000 ARM ARCHITECTURE -P: Lennert Buytenhek -M: kernel@wantstofly.org +M: Lennert Buytenhek L: linux-arm-kernel@lists.arm.linux.org.uk (subscribers-only) S: Maintained ARM/INTEL IXDP2850 MACHINE SUPPORT -P: Lennert Buytenhek -M: kernel@wantstofly.org +M: Lennert Buytenhek L: linux-arm-kernel@lists.arm.linux.org.uk (subscribers-only) S: Maintained ARM/INTEL IXP23XX ARM ARCHITECTURE -P: Lennert Buytenhek -M: kernel@wantstofly.org +M: Lennert Buytenhek L: linux-arm-kernel@lists.arm.linux.org.uk (subscribers-only) S: Maintained ARM/INTEL XSC3 (MANZANO) ARM CORE -P: Lennert Buytenhek -M: kernel@wantstofly.org -P: Dan Williams -M: dan.j.williams@intel.com +M: Lennert Buytenhek +M: Dan Williams L: linux-arm-kernel@lists.arm.linux.org.uk (subscribers-only) S: Supported ARM/IP FABRICS DOUBLE ESPRESSO MACHINE SUPPORT -P: Lennert Buytenhek -M: kernel@wantstofly.org +M: Lennert Buytenhek L: linux-arm-kernel@lists.arm.linux.org.uk (subscribers-only) S: Maintained ARM/LOGICPD PXA270 MACHINE SUPPORT -P: Lennert Buytenhek -M: kernel@wantstofly.org +M: Lennert Buytenhek L: linux-arm-kernel@lists.arm.linux.org.uk (subscribers-only) S: Maintained ARM/MAGICIAN MACHINE SUPPORT -P: Philipp Zabel -M: philipp.zabel@gmail.com +M: Philipp Zabel S: Maintained ARM/MIOA701 MACHINE SUPPORT -P: Robert Jarzmik -M: robert.jarzmik@free.fr +M: Robert Jarzmik L: linux-arm-kernel@lists.arm.linux.org.uk (subscribers-only) F: arch/arm/mach-pxa/mioa701.c S: Maintained ARM/NEC MOBILEPRO 900/c MACHINE SUPPORT -P: Michael Petchkovsky -M: mkpetch@internode.on.net +M: Michael Petchkovsky S: Maintained ARM/OPENMOKO NEO FREERUNNER (GTA02) MACHINE SUPPORT -P: Nelson Castillo -M: arhuaco@freaks-unidos.net +M: Nelson Castillo L: openmoko-kernel@lists.openmoko.org (subscribers-only) W: http://wiki.openmoko.org/wiki/Neo_FreeRunner S: Supported ARM/TOSA MACHINE SUPPORT -P: Dmitry Eremin-Solenikov -M: dbaryshkov@gmail.com -P: Dirk Opfer -M: dirk@opfer-online.de +M: Dmitry Eremin-Solenikov +M: Dirk Opfer S: Maintained ARM/PALMTX,PALMT5,PALMLD,PALMTE2 SUPPORT -P: Marek Vasut -M: marek.vasut@gmail.com +M: Marek Vasut W: http://hackndev.com S: Maintained ARM/PALM TREO 680 SUPPORT -P: Tomas Cech -M: sleep_walker@suse.cz +M: Tomas Cech W: http://hackndev.com S: Maintained ARM/PALMZ72 SUPPORT -P: Sergey Lapin -M: slapin@ossfans.org +M: Sergey Lapin W: http://hackndev.com S: Maintained ARM/PLEB SUPPORT -P: Peter Chubb -M: pleb@gelato.unsw.edu.au +M: Peter Chubb W: http://www.disy.cse.unsw.edu.au/Hardware/PLEB S: Maintained ARM/PT DIGITAL BOARD PORT -P: Stefan Eletzhofer -M: stefan.eletzhofer@eletztrick.de +M: Stefan Eletzhofer L: linux-arm-kernel@lists.arm.linux.org.uk (subscribers-only) W: http://www.arm.linux.org.uk/ S: Maintained ARM/RADISYS ENP2611 MACHINE SUPPORT -P: Lennert Buytenhek -M: kernel@wantstofly.org +M: Lennert Buytenhek L: linux-arm-kernel@lists.arm.linux.org.uk (subscribers-only) S: Maintained ARM/RISCPC ARCHITECTURE -P: Russell King -M: linux@arm.linux.org.uk +M: Russell King L: linux-arm-kernel@lists.arm.linux.org.uk (subscribers-only) W: http://www.arm.linux.org.uk/ S: Maintained @@ -862,14 +750,12 @@ F: drivers/net/arm/ether* F: drivers/scsi/arm/ ARM/SHARK MACHINE SUPPORT -P: Alexander Schulz -M: alex@shark-linux.de +M: Alexander Schulz W: http://www.shark-linux.de/shark.html S: Maintained ARM/SAMSUNG ARM ARCHITECTURES -P: Ben Dooks -M: ben-linux@fluff.org +M: Ben Dooks L: linux-arm-kernel@lists.arm.linux.org.uk (subscribers-only) W: http://www.fluff.org/ben/linux/ S: Maintained @@ -877,85 +763,73 @@ F: arch/arm/plat-s3c/ F: arch/arm/plat-s3c24xx/ ARM/S3C2410 ARM ARCHITECTURE -P: Ben Dooks -M: ben-linux@fluff.org +M: Ben Dooks L: linux-arm-kernel@lists.arm.linux.org.uk (subscribers-only) W: http://www.fluff.org/ben/linux/ S: Maintained F: arch/arm/mach-s3c2410/ ARM/S3C2440 ARM ARCHITECTURE -P: Ben Dooks -M: ben-linux@fluff.org +M: Ben Dooks L: linux-arm-kernel@lists.arm.linux.org.uk (subscribers-only) W: http://www.fluff.org/ben/linux/ S: Maintained F: arch/arm/mach-s3c2440/ ARM/S3C2442 ARM ARCHITECTURE -P: Ben Dooks -M: ben-linux@fluff.org +M: Ben Dooks L: linux-arm-kernel@lists.arm.linux.org.uk (subscribers-only) W: http://www.fluff.org/ben/linux/ S: Maintained F: arch/arm/mach-s3c2442/ ARM/S3C2443 ARM ARCHITECTURE -P: Ben Dooks -M: ben-linux@fluff.org +M: Ben Dooks L: linux-arm-kernel@lists.arm.linux.org.uk (subscribers-only) W: http://www.fluff.org/ben/linux/ S: Maintained F: arch/arm/mach-s3c2443/ ARM/S3C6400 ARM ARCHITECTURE -P: Ben Dooks -M: ben-linux@fluff.org +M: Ben Dooks L: linux-arm-kernel@lists.arm.linux.org.uk (subscribers-only) W: http://www.fluff.org/ben/linux/ S: Maintained F: arch/arm/mach-s3c6400/ ARM/S3C6410 ARM ARCHITECTURE -P: Ben Dooks -M: ben-linux@fluff.org +M: Ben Dooks L: linux-arm-kernel@lists.arm.linux.org.uk (subscribers-only) W: http://www.fluff.org/ben/linux/ S: Maintained F: arch/arm/mach-s3c6410/ ARM/TECHNOLOGIC SYSTEMS TS7250 MACHINE SUPPORT -P: Lennert Buytenhek -M: kernel@wantstofly.org +M: Lennert Buytenhek L: linux-arm-kernel@lists.arm.linux.org.uk (subscribers-only) S: Maintained ARM/THECUS N2100 MACHINE SUPPORT -P: Lennert Buytenhek -M: kernel@wantstofly.org +M: Lennert Buytenhek L: linux-arm-kernel@lists.arm.linux.org.uk (subscribers-only) S: Maintained ARM/NUVOTON W90X900 ARM ARCHITECTURE -P: Wan ZongShun -M: mcuos.com@gmail.com +M: Wan ZongShun L: linux-arm-kernel@lists.arm.linux.org.uk (subscribers-only) W: http://www.mcuos.com S: Maintained ARM/VFP SUPPORT -P: Russell King -M: linux@arm.linux.org.uk +M: Russell King L: linux-arm-kernel@lists.arm.linux.org.uk (subscribers-only) W: http://www.arm.linux.org.uk/ S: Maintained F: arch/arm/vfp/ ASUS ACPI EXTRAS DRIVER -P: Corentin Chary -M: corentincj@iksaif.net -P: Karol Kozimor -M: sziwan@users.sourceforge.net +M: Corentin Chary +M: Karol Kozimor L: acpi4asus-user@lists.sourceforge.net W: http://acpi4asus.sf.net S: Maintained @@ -963,25 +837,21 @@ F: arch/x86/kernel/acpi/boot.c F: drivers/platform/x86/asus_acpi.c ASUS ASB100 HARDWARE MONITOR DRIVER -P: Mark M. Hoffman -M: mhoffman@lightlink.com +M: "Mark M. Hoffman" L: lm-sensors@lm-sensors.org S: Maintained F: drivers/hwmon/asb100.c ASUS LAPTOP EXTRAS DRIVER -P: Corentin Chary -M: corentincj@iksaif.net +M: Corentin Chary L: acpi4asus-user@lists.sourceforge.net W: http://acpi4asus.sf.net S: Maintained F: drivers/platform/x86/asus-laptop.c ASYNCHRONOUS TRANSFERS/TRANSFORMS (IOAT) API -P: Dan Williams -M: dan.j.williams@intel.com -P: Maciej Sosnowski -M: maciej.sosnowski@intel.com +M: Dan Williams +M: Maciej Sosnowski W: http://sourceforge.net/projects/xscaleiop S: Supported F: Documentation/crypto/async-tx-api.txt @@ -991,64 +861,49 @@ F: include/linux/dmaengine.h F: include/linux/async_tx.h ATA OVER ETHERNET (AOE) DRIVER -P: Ed L. Cashin -M: ecashin@coraid.com +M: "Ed L. Cashin" W: http://www.coraid.com/support/linux S: Supported F: Documentation/aoe/ F: drivers/block/aoe/ ATHEROS ATH5K WIRELESS DRIVER -P: Jiri Slaby -M: jirislaby@gmail.com -P: Nick Kossifidis -M: mickflemm@gmail.com -P: Luis R. Rodriguez -M: lrodriguez@atheros.com -P: Bob Copeland -M: me@bobcopeland.com +M: Jiri Slaby +M: Nick Kossifidis +M: "Luis R. Rodriguez" +M: Bob Copeland L: linux-wireless@vger.kernel.org L: ath5k-devel@lists.ath5k.org S: Maintained F: drivers/net/wireless/ath/ath5k/ ATHEROS ATH9K WIRELESS DRIVER -P: Luis R. Rodriguez -M: lrodriguez@atheros.com -P: Jouni Malinen -M: jmalinen@atheros.com -P: Sujith Manoharan -M: Sujith.Manoharan@atheros.com -P: Vasanthakumar Thiagarajan -M: vasanth@atheros.com -P: Senthil Balasubramanian -M: senthilkumar@atheros.com +M: "Luis R. Rodriguez" +M: Jouni Malinen +M: Sujith Manoharan +M: Vasanthakumar Thiagarajan +M: Senthil Balasubramanian L: linux-wireless@vger.kernel.org L: ath9k-devel@lists.ath9k.org S: Supported F: drivers/net/wireless/ath/ath9k/ ATHEROS AR9170 WIRELESS DRIVER -P: Christian Lamparter -M: chunkeey@web.de +M: Christian Lamparter L: linux-wireless@vger.kernel.org W: http://wireless.kernel.org/en/users/Drivers/ar9170 S: Maintained F: drivers/net/wireless/ath/ar9170/ ATI_REMOTE2 DRIVER -P: Ville Syrjala -M: syrjala@sci.fi +M: Ville Syrjala S: Maintained F: drivers/input/misc/ati_remote2.c ATLX ETHERNET DRIVERS -P: Jay Cliburn -M: jcliburn@gmail.com -P: Chris Snook -M: csnook@redhat.com -P: Jie Yang -M: jie.yang@atheros.com +M: Jay Cliburn +M: Chris Snook +M: Jie Yang L: atl1-devel@lists.sourceforge.net W: http://sourceforge.net/projects/atl1 W: http://atl1.sourceforge.net @@ -1056,8 +911,7 @@ S: Maintained F: drivers/net/atlx/ ATM -P: Chas Williams -M: chas@cmf.nrl.navy.mil +M: Chas Williams L: linux-atm-general@lists.sourceforge.net (subscribers-only) L: netdev@vger.kernel.org W: http://linux-atm.sourceforge.net @@ -1066,8 +920,7 @@ F: drivers/atm/ F: include/linux/atm* ATMEL AT91 MCI DRIVER -P: Nicolas Ferre -M: nicolas.ferre@atmel.com +M: Nicolas Ferre L: linux-arm-kernel@lists.arm.linux.org.uk (subscribers-only) W: http://www.atmel.com/products/AT91/ W: http://www.at91.com/ @@ -1075,49 +928,42 @@ S: Maintained F: drivers/mmc/host/at91_mci.c ATMEL AT91 / AT32 MCI DRIVER -P: Nicolas Ferre -M: nicolas.ferre@atmel.com +M: Nicolas Ferre S: Maintained F: drivers/mmc/host/atmel-mci.c F: drivers/mmc/host/atmel-mci-regs.h ATMEL AT91 / AT32 SERIAL DRIVER -P: Haavard Skinnemoen -M: hskinnemoen@atmel.com +M: Haavard Skinnemoen S: Supported F: drivers/serial/atmel_serial.c ATMEL LCDFB DRIVER -P: Nicolas Ferre -M: nicolas.ferre@atmel.com +M: Nicolas Ferre L: linux-fbdev-devel@lists.sourceforge.net (moderated for non-subscribers) S: Maintained F: drivers/video/atmel_lcdfb.c F: include/video/atmel_lcdc.h ATMEL MACB ETHERNET DRIVER -P: Haavard Skinnemoen -M: hskinnemoen@atmel.com +M: Haavard Skinnemoen S: Supported F: drivers/net/macb.* ATMEL SPI DRIVER -P: Haavard Skinnemoen -M: hskinnemoen@atmel.com +M: Haavard Skinnemoen S: Supported F: drivers/spi/atmel_spi.* ATMEL USBA UDC DRIVER -P: Haavard Skinnemoen -M: hskinnemoen@atmel.com +M: Haavard Skinnemoen L: kernel@avr32linux.org W: http://avr32linux.org/twiki/bin/view/Main/AtmelUsbDeviceDriver S: Supported F: drivers/usb/gadget/atmel_usba_udc.* ATMEL WIRELESS DRIVER -P: Simon Kelley -M: simon@thekelleys.org.uk +M: Simon Kelley L: linux-wireless@vger.kernel.org W: http://www.thekelleys.org.uk/atmel W: http://atmelwlandriver.sourceforge.net/ @@ -1125,10 +971,8 @@ S: Maintained F: drivers/net/wireless/atmel* AUDIT SUBSYSTEM -P: Al Viro -M: viro@zeniv.linux.org.uk -P: Eric Paris -M: eparis@redhat.com +M: Al Viro +M: Eric Paris L: linux-audit@redhat.com (subscribers-only) W: http://people.redhat.com/sgrubb/audit/ T: git git://git.kernel.org/pub/scm/linux/kernel/git/viro/audit-current.git @@ -1137,8 +981,7 @@ F: include/linux/audit.h F: kernel/audit* AUXILIARY DISPLAY DRIVERS -P: Miguel Ojeda Sandonis -M: miguel.ojeda.sandonis@gmail.com +M: Miguel Ojeda Sandonis W: http://miguelojeda.es/auxdisplay.htm W: http://jair.lab.fi.uva.es/~migojed/auxdisplay.htm S: Maintained @@ -1146,8 +989,7 @@ F: drivers/auxdisplay/ F: include/linux/cfag12864b.h AVR32 ARCHITECTURE -P: Haavard Skinnemoen -M: hskinnemoen@atmel.com +M: Haavard Skinnemoen W: http://www.atmel.com/products/AVR32/ W: http://avr32linux.org/ W: http://avrfreaks.net/ @@ -1155,14 +997,12 @@ S: Supported F: arch/avr32/ AVR32/AT32AP MACHINE SUPPORT -P: Haavard Skinnemoen -M: hskinnemoen@atmel.com +M: Haavard Skinnemoen S: Supported F: arch/avr32/mach-at32ap/ AX.25 NETWORK LAYER -P: Ralf Baechle -M: ralf@linux-mips.org +M: Ralf Baechle L: linux-hams@vger.kernel.org W: http://www.linux-ax25.org/ S: Maintained @@ -1171,128 +1011,110 @@ F: include/net/ax25.h F: net/ax25/ B43 WIRELESS DRIVER -P: Michael Buesch -M: mb@bu3sch.de -P: Stefano Brivio -M: stefano.brivio@polimi.it +M: Michael Buesch +M: Stefano Brivio L: linux-wireless@vger.kernel.org W: http://linuxwireless.org/en/users/Drivers/b43 S: Maintained F: drivers/net/wireless/b43/ B43LEGACY WIRELESS DRIVER -P: Larry Finger -M: Larry.Finger@lwfinger.net -P: Stefano Brivio -M: stefano.brivio@polimi.it +M: Larry Finger +M: Stefano Brivio L: linux-wireless@vger.kernel.org W: http://linuxwireless.org/en/users/Drivers/b43 S: Maintained F: drivers/net/wireless/b43legacy/ BACKLIGHT CLASS/SUBSYSTEM -P: Richard Purdie -M: rpurdie@rpsys.net +M: Richard Purdie S: Maintained F: drivers/video/backlight/ F: include/linux/backlight.h BAYCOM/HDLCDRV DRIVERS FOR AX.25 -P: Thomas Sailer -M: t.sailer@alumni.ethz.ch +M: Thomas Sailer L: linux-hams@vger.kernel.org W: http://www.baycom.org/~tom/ham/ham.html S: Maintained F: drivers/net/hamradio/baycom* BEFS FILE SYSTEM -P: Sergey S. Kostyliov -M: rathamahata@php4.ru +M: "Sergey S. Kostyliov" S: Maintained F: Documentation/filesystems/befs.txt F: fs/befs/ BFS FILE SYSTEM -P: Tigran A. Aivazian -M: tigran@aivazian.fsnet.co.uk +M: "Tigran A. Aivazian" S: Maintained F: Documentation/filesystems/bfs.txt F: fs/bfs/ F: include/linux/bfs_fs.h BLACKFIN ARCHITECTURE -P: Mike Frysinger -M: vapier@gentoo.org +M: Mike Frysinger L: uclinux-dist-devel@blackfin.uclinux.org W: http://blackfin.uclinux.org S: Supported F: arch/blackfin/ BLACKFIN EMAC DRIVER -P: Michael Hennerich -M: michael.hennerich@analog.com +M: Michael Hennerich L: uclinux-dist-devel@blackfin.uclinux.org W: http://blackfin.uclinux.org S: Supported F: drivers/net/bfin_mac.* BLACKFIN RTC DRIVER -P: Mike Frysinger -M: vapier.adi@gmail.com +M: Mike Frysinger L: uclinux-dist-devel@blackfin.uclinux.org W: http://blackfin.uclinux.org S: Supported F: drivers/rtc/rtc-bfin.c BLACKFIN SERIAL DRIVER -P: Sonic Zhang -M: sonic.zhang@analog.com +M: Sonic Zhang L: uclinux-dist-devel@blackfin.uclinux.org W: http://blackfin.uclinux.org S: Supported F: drivers/serial/bfin_5xx.c BLACKFIN WATCHDOG DRIVER -P: Mike Frysinger -M: vapier.adi@gmail.com +M: Mike Frysinger L: uclinux-dist-devel@blackfin.uclinux.org W: http://blackfin.uclinux.org S: Supported F: drivers/watchdog/bfin_wdt.c BLACKFIN I2C TWI DRIVER -P: Sonic Zhang -M: sonic.zhang@analog.com +M: Sonic Zhang L: uclinux-dist-devel@blackfin.uclinux.org W: http://blackfin.uclinux.org/ S: Supported F: drivers/i2c/busses/i2c-bfin-twi.c BLOCK LAYER -P: Jens Axboe -M: axboe@kernel.dk +M: Jens Axboe T: git git://git.kernel.org/pub/scm/linux/kernel/git/axboe/linux-2.6-block.git S: Maintained F: block/ BLOCK2MTD DRIVER -P: Joern Engel -M: joern@lazybastard.org +M: Joern Engel L: linux-mtd@lists.infradead.org S: Maintained F: drivers/mtd/devices/block2mtd.c BLUETOOTH DRIVERS -P: Marcel Holtmann -M: marcel@holtmann.org +M: Marcel Holtmann L: linux-bluetooth@vger.kernel.org W: http://www.bluez.org/ S: Maintained F: drivers/bluetooth/ BLUETOOTH SUBSYSTEM -P: Marcel Holtmann -M: marcel@holtmann.org +M: Marcel Holtmann L: linux-bluetooth@vger.kernel.org W: http://www.bluez.org/ T: git git://git.kernel.org/pub/scm/linux/kernel/git/holtmann/bluetooth-2.6.git @@ -1301,8 +1123,7 @@ F: net/bluetooth/ F: include/net/bluetooth/ BONDING DRIVER -P: Jay Vosburgh -M: fubar@us.ibm.com +M: Jay Vosburgh L: bonding-devel@lists.sourceforge.net W: http://sourceforge.net/projects/bonding/ S: Supported @@ -1310,54 +1131,46 @@ F: drivers/net/bonding/ F: include/linux/if_bonding.h BROADCOM B44 10/100 ETHERNET DRIVER -P: Gary Zambrano -M: zambrano@broadcom.com +M: Gary Zambrano L: netdev@vger.kernel.org S: Supported F: drivers/net/b44.* BROADCOM BNX2 GIGABIT ETHERNET DRIVER -P: Michael Chan -M: mchan@broadcom.com +M: Michael Chan L: netdev@vger.kernel.org S: Supported F: drivers/net/bnx2.* F: drivers/net/bnx2_* BROADCOM BNX2X 10 GIGABIT ETHERNET DRIVER -P: Eilon Greenstein -M: eilong@broadcom.com +M: Eilon Greenstein L: netdev@vger.kernel.org S: Supported F: drivers/net/bnx2x* BROADCOM TG3 GIGABIT ETHERNET DRIVER -P: Matt Carlson -M: mcarlson@broadcom.com -P: Michael Chan -M: mchan@broadcom.com +M: Matt Carlson +M: Michael Chan L: netdev@vger.kernel.org S: Supported F: drivers/net/tg3.* BSG (block layer generic sg v4 driver) -P: FUJITA Tomonori -M: fujita.tomonori@lab.ntt.co.jp +M: FUJITA Tomonori L: linux-scsi@vger.kernel.org S: Supported F: block/bsg.c F: include/linux/bsg.h BT8XXGPIO DRIVER -P: Michael Buesch -M: mb@bu3sch.de +M: Michael Buesch W: http://bu3sch.de/btgpio.php S: Maintained F: drivers/gpio/bt8xxgpio.c BTRFS FILE SYSTEM -P: Chris Mason -M: chris.mason@oracle.com +M: Chris Mason L: linux-btrfs@vger.kernel.org W: http://btrfs.wiki.kernel.org/ T: git git://git.kernel.org/pub/scm/linux/kernel/git/mason/btrfs-unstable.git @@ -1366,8 +1179,7 @@ F: Documentation/filesystems/btrfs.txt F: fs/btrfs/ BTTV VIDEO4LINUX DRIVER -P: Mauro Carvalho Chehab -M: mchehab@infradead.org +M: Mauro Carvalho Chehab L: linux-media@vger.kernel.org W: http://linuxtv.org T: git git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6.git @@ -1376,16 +1188,14 @@ F: Documentation/video4linux/bttv/ F: drivers/media/video/bt8xx/bttv* CACHEFILES: FS-CACHE BACKEND FOR CACHING ON MOUNTED FILESYSTEMS -P: David Howells -M: dhowells@redhat.com +M: David Howells L: linux-cachefs@redhat.com S: Supported F: Documentation/filesystems/caching/cachefiles.txt F: fs/cachefiles/ CAFE CMOS INTEGRATED CAMERA CONTROLLER DRIVER -P: Jonathan Corbet -M: corbet@lwn.net +M: Jonathan Corbet L: linux-media@vger.kernel.org T: git git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6.git S: Maintained @@ -1393,10 +1203,8 @@ F: Documentation/video4linux/cafe_ccic F: drivers/media/video/cafe_ccic* CALGARY x86-64 IOMMU -P: Muli Ben-Yehuda -M: muli@il.ibm.com -P: Jon D. Mason -M: jdmason@kudzu.us +M: Muli Ben-Yehuda +M: "Jon D. Mason" L: discuss@x86-64.org S: Maintained F: arch/x86/kernel/pci-calgary_64.c @@ -1405,10 +1213,8 @@ F: arch/x86/include/asm/calgary.h F: arch/x86/include/asm/tce.h CAN NETWORK LAYER -P: Urs Thuermann -M: urs.thuermann@volkswagen.de -P: Oliver Hartkopp -M: oliver.hartkopp@volkswagen.de +M: Urs Thuermann +M: Oliver Hartkopp L: socketcan-core@lists.berlios.de (subscribers-only) W: http://developer.berlios.de/projects/socketcan/ S: Maintained @@ -1417,15 +1223,13 @@ F: include/linux/can/ F: include/linux/can.h CAN NETWORK DRIVERS -P: Wolfgang Grandegger -M: wg@grandegger.com +M: Wolfgang Grandegger L: socketcan-core@lists.berlios.de (subscribers-only) W: http://developer.berlios.de/projects/socketcan/ S: Maintained CELL BROADBAND ENGINE ARCHITECTURE -P: Arnd Bergmann -M: arnd@arndb.de +M: Arnd Bergmann L: linuxppc-dev@ozlabs.org L: cbe-oss-dev@ozlabs.org W: http://www.ibm.com/developerworks/power/cell/ @@ -1436,8 +1240,7 @@ F: arch/powerpc/oprofile/*cell* F: arch/powerpc/platforms/cell/ CERTIFIED WIRELESS USB (WUSB) SUBSYSTEM: -P: David Vrabel -M: david.vrabel@csr.com +M: David Vrabel L: linux-usb@vger.kernel.org S: Supported F: Documentation/usb/WUSB-Design-overview.txt @@ -1446,8 +1249,7 @@ F: drivers/usb/wusbcore/ F: include/linux/usb/wusb* CFAG12864B LCD DRIVER -P: Miguel Ojeda Sandonis -M: miguel.ojeda.sandonis@gmail.com +M: Miguel Ojeda Sandonis W: http://miguelojeda.es/auxdisplay.htm W: http://jair.lab.fi.uva.es/~migojed/auxdisplay.htm S: Maintained @@ -1455,8 +1257,7 @@ F: drivers/auxdisplay/cfag12864b.c F: include/linux/cfag12864b.h CFAG12864BFB LCD FRAMEBUFFER DRIVER -P: Miguel Ojeda Sandonis -M: miguel.ojeda.sandonis@gmail.com +M: Miguel Ojeda Sandonis W: http://miguelojeda.es/auxdisplay.htm W: http://jair.lab.fi.uva.es/~migojed/auxdisplay.htm S: Maintained @@ -1464,8 +1265,7 @@ F: drivers/auxdisplay/cfag12864bfb.c F: include/linux/cfag12864b.h CFG80211 and NL80211 -P: Johannes Berg -M: johannes@sipsolutions.net +M: Johannes Berg L: linux-wireless@vger.kernel.org S: Maintained F: include/linux/nl80211.h @@ -1474,57 +1274,47 @@ F: net/wireless/* X: net/wireless/wext* CHECKPATCH -P: Andy Whitcroft -M: apw@canonical.com +M: Andy Whitcroft S: Supported F: scripts/checkpatch.pl CISCO 10G ETHERNET DRIVER -P: Scott Feldman -M: scofeldm@cisco.com -P: Joe Eykholt -M: jeykholt@cisco.com +M: Scott Feldman +M: Joe Eykholt S: Supported F: drivers/net/enic/ CIRRUS LOGIC EP93XX ETHERNET DRIVER -P: Lennert Buytenhek -M: kernel@wantstofly.org +M: Lennert Buytenhek L: netdev@vger.kernel.org S: Maintained F: drivers/net/arm/ep93xx_eth.c CIRRUS LOGIC EP93XX OHCI USB HOST DRIVER -P: Lennert Buytenhek -M: kernel@wantstofly.org +M: Lennert Buytenhek L: linux-usb@vger.kernel.org S: Maintained F: drivers/usb/host/ohci-ep93xx.c CIRRUS LOGIC CS4270 SOUND DRIVER -P: Timur Tabi -M: timur@freescale.com +M: Timur Tabi L: alsa-devel@alsa-project.org (moderated for non-subscribers) S: Supported F: sound/soc/codecs/cs4270* CLK API -P: Russell King -M: linux@arm.linux.org.uk +M: Russell King F: include/linux/clk.h CISCO FCOE HBA DRIVER -P: Abhijeet Joglekar -M: abjoglek@cisco.com -P: Joe Eykholt -M: jeykholt@cisco.com +M: Abhijeet Joglekar +M: Joe Eykholt L: linux-scsi@vger.kernel.org S: Supported F: drivers/scsi/fnic/ CODA FILE SYSTEM -P: Jan Harkes -M: jaharkes@cs.cmu.edu +M: Jan Harkes M: coda@cs.cmu.edu L: codalist@coda.cs.cmu.edu W: http://www.coda.cs.cmu.edu/ @@ -1534,8 +1324,7 @@ F: fs/coda/ F: include/linux/coda*.h COMMON INTERNET FILE SYSTEM (CIFS) -P: Steve French -M: sfrench@samba.org +M: Steve French L: linux-cifs-client@lists.samba.org L: samba-technical@lists.samba.org W: http://linux-cifs.samba.org/ @@ -1545,67 +1334,57 @@ F: Documentation/filesystems/cifs.txt F: fs/cifs/ COMPACTPCI HOTPLUG CORE -P: Scott Murray -M: scott@spiteful.org +M: Scott Murray L: linux-pci@vger.kernel.org S: Maintained F: drivers/pci/hotplug/cpci_hotplug* COMPACTPCI HOTPLUG ZIATECH ZT5550 DRIVER -P: Scott Murray -M: scott@spiteful.org +M: Scott Murray L: linux-pci@vger.kernel.org S: Maintained F: drivers/pci/hotplug/cpcihp_zt5550.* COMPACTPCI HOTPLUG GENERIC DRIVER -P: Scott Murray -M: scott@spiteful.org +M: Scott Murray L: linux-pci@vger.kernel.org S: Maintained F: drivers/pci/hotplug/cpcihp_generic.c COMPAL LAPTOP SUPPORT -P: Cezary Jackiewicz -M: cezary.jackiewicz@gmail.com +M: Cezary Jackiewicz S: Maintained F: drivers/platform/x86/compal-laptop.c COMPUTONE INTELLIPORT MULTIPORT CARD -P: Michael H. Warfield -M: mhw@wittsend.com +M: "Michael H. Warfield" W: http://www.wittsend.com/computone.html S: Maintained F: Documentation/serial/computone.txt F: drivers/char/ip2/ CONEXANT ACCESSRUNNER USB DRIVER -P: Simon Arlott -M: cxacru@fire.lp0.eu +M: Simon Arlott L: accessrunner-general@lists.sourceforge.net W: http://accessrunner.sourceforge.net/ S: Maintained F: drivers/usb/atm/cxacru.c CONFIGFS -P: Joel Becker -M: joel.becker@oracle.com +M: Joel Becker S: Supported F: fs/configfs/ F: include/linux/configfs.h CONNECTOR -P: Evgeniy Polyakov -M: zbr@ioremap.net +M: Evgeniy Polyakov L: netdev@vger.kernel.org S: Maintained F: drivers/connector/ CONTROL GROUPS (CGROUPS) -P: Paul Menage -M: menage@google.com -P: Li Zefan -M: lizf@cn.fujitsu.com +M: Paul Menage +M: Li Zefan L: containers@lists.linux-foundation.org S: Maintained F: include/linux/cgroup* @@ -1613,30 +1392,26 @@ F: kernel/cgroup* F: mm/*cgroup* CORETEMP HARDWARE MONITORING DRIVER -P: Rudolf Marek -M: r.marek@assembler.cz +M: Rudolf Marek L: lm-sensors@lm-sensors.org S: Maintained F: Documentation/hwmon/coretemp F: drivers/hwmon/coretemp.c COSA/SRP SYNC SERIAL DRIVER -P: Jan "Yenya" Kasprzak -M: kas@fi.muni.cz +M: Jan "Yenya" Kasprzak W: http://www.fi.muni.cz/~kas/cosa/ S: Maintained F: drivers/net/wan/cosa* CPMAC ETHERNET DRIVER -P: Florian Fainelli -M: florian@openwrt.org +M: Florian Fainelli L: netdev@vger.kernel.org S: Maintained F: drivers/net/cpmac.c CPU FREQUENCY DRIVERS -P: Dave Jones -M: davej@redhat.com +M: Dave Jones L: cpufreq@vger.kernel.org W: http://www.codemonkey.org.uk/projects/cpufreq/ T: git git://git.kernel.org/pub/scm/linux/kernel/git/davej/cpufreq.git @@ -1646,15 +1421,13 @@ F: drivers/cpufreq/ F: include/linux/cpufreq.h CPUID/MSR DRIVER -P: H. Peter Anvin -M: hpa@zytor.com +M: "H. Peter Anvin" S: Maintained F: arch/x86/kernel/cpuid.c F: arch/x86/kernel/msr.c CPUSETS -P: Paul Menage -M: menage@google.com +M: Paul Menage W: http://www.bullopensource.org/cpuset/ W: http://oss.sgi.com/projects/cpusets/ S: Supported @@ -1669,20 +1442,16 @@ F: Documentation/filesystems/cramfs.txt F: fs/cramfs/ CRIS PORT -P: Mikael Starvik -M: starvik@axis.com -P: Jesper Nilsson -M: jesper.nilsson@axis.com +M: Mikael Starvik +M: Jesper Nilsson L: linux-cris-kernel@axis.com W: http://developer.axis.com S: Maintained F: arch/cris/ CRYPTO API -P: Herbert Xu -M: herbert@gondor.apana.org.au -P: David S. Miller -M: davem@davemloft.net +M: Herbert Xu +M: "David S. Miller" L: linux-crypto@vger.kernel.org T: git git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6.git S: Maintained @@ -1693,22 +1462,18 @@ F: drivers/crypto/ F: include/crypto/ CRYPTOGRAPHIC RANDOM NUMBER GENERATOR -P: Neil Horman -M: nhorman@tuxdriver.com +M: Neil Horman L: linux-crypto@vger.kernel.org S: Maintained CS5535 Audio ALSA driver -P: Jaya Kumar -M: jayakumar.alsa@gmail.com +M: Jaya Kumar S: Maintained F: sound/pci/cs5535audio/ CX18 VIDEO4LINUX DRIVER -P: Hans Verkuil -M: hverkuil@xs4all.nl -P: Andy Walls -M: awalls@radix.net +M: Hans Verkuil +M: Andy Walls L: ivtv-devel@ivtvdriver.org L: linux-media@vger.kernel.org T: git git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6.git @@ -1719,32 +1484,28 @@ F: Documentation/video4linux/cx18.txt F: drivers/media/video/cx18/ CXGB3 ETHERNET DRIVER (CXGB3) -P: Divy Le Ray -M: divy@chelsio.com +M: Divy Le Ray L: netdev@vger.kernel.org W: http://www.chelsio.com S: Supported F: drivers/net/cxgb3/ CXGB3 IWARP RNIC DRIVER (IW_CXGB3) -P: Steve Wise -M: swise@chelsio.com +M: Steve Wise L: general@lists.openfabrics.org W: http://www.openfabrics.org S: Supported F: drivers/infiniband/hw/cxgb3/ CYBERPRO FB DRIVER -P: Russell King -M: linux@arm.linux.org.uk +M: Russell King L: linux-arm-kernel@lists.arm.linux.org.uk (subscribers-only) W: http://www.arm.linux.org.uk/ S: Maintained F: drivers/video/cyber2000fb.* CYCLADES 2X SYNC CARD DRIVER -P: Arnaldo Carvalho de Melo -M: acme@ghostprotocols.net +M: Arnaldo Carvalho de Melo W: http://oops.ghostprotocols.net:81/blog S: Maintained F: drivers/net/wan/cycx* @@ -1761,8 +1522,7 @@ S: Orphan F: drivers/net/wan/pc300* DAMA SLAVE for AX.25 -P: Joerg Reuter -M: jreuter@yaina.de +M: Joerg Reuter W: http://yaina.de/jreuter/ W: http://www.qsl.net/dl1bke/ L: linux-hams@vger.kernel.org @@ -1776,29 +1536,23 @@ F: net/ax25/ax25_timer.c F: net/ax25/sysctl_net_ax25.c DAVICOM FAST ETHERNET (DMFE) NETWORK DRIVER -P: Tobias Ringstrom -M: tori@unhappy.mine.nu +M: Tobias Ringstrom L: netdev@vger.kernel.org S: Maintained F: Documentation/networking/dmfe.txt F: drivers/net/tulip/dmfe.c DC390/AM53C974 SCSI driver -P: Kurt Garloff -M: garloff@suse.de +M: Kurt Garloff W: http://www.garloff.de/kurt/linux/dc390/ -P: Guennadi Liakhovetski -M: g.liakhovetski@gmx.de +M: Guennadi Liakhovetski S: Maintained F: drivers/scsi/tmscsim.* DC395x SCSI driver -P: Oliver Neukum -M: oliver@neukum.name -P: Ali Akcaagac -M: aliakc@web.de -P: Jamie Lenehan -M: lenehan@twibble.org +M: Oliver Neukum +M: Ali Akcaagac +M: Jamie Lenehan W: http://twibble.org/dist/dc395x/ L: dc395x@twibble.org L: http://lists.twibble.org/mailman/listinfo/dc395x/ @@ -1807,8 +1561,7 @@ F: Documentation/scsi/dc395x.txt F: drivers/scsi/dc395x.* DCCP PROTOCOL -P: Arnaldo Carvalho de Melo -M: acme@ghostprotocols.net +M: Arnaldo Carvalho de Melo L: dccp@vger.kernel.org W: http://linux-net.osdl.org/index.php/DCCP S: Maintained @@ -1817,8 +1570,7 @@ F: include/linux/tfrc.h F: net/dccp/ DECnet NETWORK LAYER -P: Christine Caulfield -M: christine.caulfield@googlemail.com +M: Christine Caulfield W: http://linux-decnet.sourceforge.net L: linux-decnet-user@lists.sourceforge.net S: Maintained @@ -1826,40 +1578,34 @@ F: Documentation/networking/decnet.txt F: net/decnet/ DEFXX FDDI NETWORK DRIVER -P: Maciej W. Rozycki -M: macro@linux-mips.org +M: "Maciej W. Rozycki" S: Maintained F: drivers/net/defxx.* DELL LAPTOP DRIVER -P: Matthew Garrett -M: mjg59@srcf.ucam.org +M: Matthew Garrett S: Maintained F: drivers/platform/x86/dell-laptop.c DELL LAPTOP SMM DRIVER -P: Massimo Dal Zotto -M: dz@debian.org +M: Massimo Dal Zotto W: http://www.debian.org/~dz/i8k/ S: Maintained F: drivers/char/i8k.c F: include/linux/i8k.h DELL SYSTEMS MANAGEMENT BASE DRIVER (dcdbas) -P: Doug Warzecha -M: Douglas_Warzecha@dell.com +M: Doug Warzecha S: Maintained F: Documentation/dcdbas.txt F: drivers/firmware/dcdbas.* DELL WMI EXTRAS DRIVER -P: Matthew Garrett -M: mjg59@srcf.ucam.org +M: Matthew Garrett S: Maintained DEVICE NUMBER REGISTRY -P: Torben Mathiasen -M: device@lanana.org +M: Torben Mathiasen W: http://lanana.org/docs/device-list/index.html S: Maintained @@ -1874,8 +1620,7 @@ F: include/linux/device-mapper.h F: include/linux/dm-*.h DIGI INTL. EPCA DRIVER -P: Digi International, Inc -M: Eng.Linux@digi.com +M: "Digi International, Inc" L: Eng.Linux@digi.com W: http://www.digi.com S: Orphan @@ -1884,34 +1629,29 @@ F: drivers/char/epca* F: drivers/char/digi* DIRECTORY NOTIFICATION (DNOTIFY) -P: Eric Paris -M: eparis@parisplace.org +M: Eric Paris S: Maintained F: Documentation/filesystems/dnotify.txt F: fs/notify/dnotify/ F: include/linux/dnotify.h DISK GEOMETRY AND PARTITION HANDLING -P: Andries Brouwer -M: aeb@cwi.nl +M: Andries Brouwer W: http://www.win.tue.nl/~aeb/linux/Large-Disk.html W: http://www.win.tue.nl/~aeb/linux/zip/zip-1.html W: http://www.win.tue.nl/~aeb/partitions/partition_types-1.html S: Maintained DISKQUOTA -P: Jan Kara -M: jack@suse.cz +M: Jan Kara S: Maintained F: Documentation/filesystems/quota.txt F: fs/quota/ F: include/linux/quota*.h DISTRIBUTED LOCK MANAGER (DLM) -P: Christine Caulfield -M: ccaulfie@redhat.com -P: David Teigland -M: teigland@redhat.com +M: Christine Caulfield +M: David Teigland L: cluster-devel@redhat.com W: http://sources.redhat.com/cluster/ T: git git://git.kernel.org/pub/scm/linux/kernel/git/teigland/dlm.git @@ -1919,52 +1659,44 @@ S: Supported F: fs/dlm/ DMA GENERIC OFFLOAD ENGINE SUBSYSTEM -P: Maciej Sosnowski -M: maciej.sosnowski@intel.com -P: Dan Williams -M: dan.j.williams@intel.com +M: Maciej Sosnowski +M: Dan Williams S: Supported F: drivers/dma/ F: include/linux/dma* DME1737 HARDWARE MONITOR DRIVER -P: Juerg Haefliger -M: juergh@gmail.com +M: Juerg Haefliger L: lm-sensors@lm-sensors.org S: Maintained F: Documentation/hwmon/dme1737 F: drivers/hwmon/dme1737.c DOCBOOK FOR DOCUMENTATION -P: Randy Dunlap -M: rdunlap@xenotime.net +M: Randy Dunlap S: Maintained DOCKING STATION DRIVER -P: Shaohua Li -M: shaohua.li@intel.com +M: Shaohua Li L: linux-acpi@vger.kernel.org S: Supported F: drivers/acpi/dock.c DOCUMENTATION -P: Randy Dunlap -M: rdunlap@xenotime.net +M: Randy Dunlap L: linux-doc@vger.kernel.org S: Maintained F: Documentation/ DOUBLETALK DRIVER -P: James R. Van Zandt -M: jrv@vanzandt.mv.com +M: "James R. Van Zandt" L: blinux-list@redhat.com S: Maintained F: drivers/char/dtlk.c F: include/linux/dtlk.h DPT_I2O SCSI RAID DRIVER -P: Adaptec OEM Raid Solutions -M: aacraid@adaptec.com +M: Adaptec OEM Raid Solutions L: linux-scsi@vger.kernel.org W: http://www.adaptec.com/ S: Maintained @@ -1972,8 +1704,7 @@ F: drivers/scsi/dpt* F: drivers/scsi/dpt/ DRIVER CORE, KOBJECTS, AND SYSFS -P: Greg Kroah-Hartman -M: gregkh@suse.de +M: Greg Kroah-Hartman T: quilt kernel.org/pub/linux/kernel/people/gregkh/gregkh-2.6/ S: Supported F: Documentation/kobject.txt @@ -1983,52 +1714,45 @@ F: include/linux/kobj* F: lib/kobj* DRM DRIVERS -P: David Airlie -M: airlied@linux.ie +M: David Airlie L: dri-devel@lists.sourceforge.net T: git git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6.git S: Maintained F: drivers/gpu/drm/ DSCC4 DRIVER -P: Francois Romieu -M: romieu@fr.zoreil.com +M: Francois Romieu L: netdev@vger.kernel.org S: Maintained F: drivers/net/wan/dscc4.c DZ DECSTATION DZ11 SERIAL DRIVER -P: Maciej W. Rozycki -M: macro@linux-mips.org +M: "Maciej W. Rozycki" S: Maintained F: drivers/serial/dz.* EATA-DMA SCSI DRIVER -P: Michael Neuffer -M: mike@i-Connect.Net +M: Michael Neuffer L: linux-eata@i-connect.net L: linux-scsi@vger.kernel.org S: Maintained F: drivers/scsi/eata* EATA ISA/EISA/PCI SCSI DRIVER -P: Dario Ballabio -M: ballabio_dario@emc.com +M: Dario Ballabio L: linux-scsi@vger.kernel.org S: Maintained F: drivers/scsi/eata.c EATA-PIO SCSI DRIVER -P: Michael Neuffer -M: mike@i-Connect.Net +M: Michael Neuffer L: linux-eata@i-connect.net L: linux-scsi@vger.kernel.org S: Maintained F: drivers/scsi/eata_pio.* EBTABLES -P: Bart De Schuymer -M: bart.de.schuymer@pandora.be +M: Bart De Schuymer L: ebtables-user@lists.sourceforge.net L: ebtables-devel@lists.sourceforge.net W: http://ebtables.sourceforge.net/ @@ -2037,10 +1761,8 @@ F: include/linux/netfilter_bridge/ebt_*.h F: net/bridge/netfilter/ebt*.c ECRYPT FILE SYSTEM -P: Tyler Hicks -M: tyhicks@linux.vnet.ibm.com -P: Dustin Kirkland -M: kirkland@canonical.com +M: Tyler Hicks +M: Dustin Kirkland L: ecryptfs-devel@lists.launchpad.net W: https://launchpad.net/ecryptfs S: Supported @@ -2048,8 +1770,7 @@ F: Documentation/filesystems/ecryptfs.txt F: fs/ecryptfs/ EDAC-CORE -P: Doug Thompson -M: dougthompson@xmission.com +M: Doug Thompson L: bluesmoke-devel@lists.sourceforge.net (moderated for non-subscribers) W: bluesmoke.sourceforge.net S: Supported @@ -2058,94 +1779,80 @@ F: drivers/edac/edac_* F: include/linux/edac.h EDAC-AMD64 -P: Doug Thompson -M: dougthompson@xmission.com -P: Borislav Petkov -M: borislav.petkov@amd.com +M: Doug Thompson +M: Borislav Petkov L: bluesmoke-devel@lists.sourceforge.net (moderated for non-subscribers) W: bluesmoke.sourceforge.net S: Supported F: drivers/edac/amd64_edac* EDAC-E752X -P: Mark Gross -M: mark.gross@intel.com -P: Doug Thompson -M: dougthompson@xmission.com +M: Mark Gross +M: Doug Thompson L: bluesmoke-devel@lists.sourceforge.net (moderated for non-subscribers) W: bluesmoke.sourceforge.net S: Maintained F: drivers/edac/e752x_edac.c EDAC-E7XXX -P: Doug Thompson -M: dougthompson@xmission.com +M: Doug Thompson L: bluesmoke-devel@lists.sourceforge.net (moderated for non-subscribers) W: bluesmoke.sourceforge.net S: Maintained F: drivers/edac/e7xxx_edac.c EDAC-I82443BXGX -P: Tim Small -M: tim@buttersideup.com +M: Tim Small L: bluesmoke-devel@lists.sourceforge.net (moderated for non-subscribers) W: bluesmoke.sourceforge.net S: Maintained F: drivers/edac/i82443bxgx_edac.c EDAC-I3000 -P: Jason Uhlenkott -M: juhlenko@akamai.com +M: Jason Uhlenkott L: bluesmoke-devel@lists.sourceforge.net (moderated for non-subscribers) W: bluesmoke.sourceforge.net S: Maintained F: drivers/edac/i3000_edac.c EDAC-I5000 -P: Doug Thompson -M: dougthompson@xmission.com +M: Doug Thompson L: bluesmoke-devel@lists.sourceforge.net (moderated for non-subscribers) W: bluesmoke.sourceforge.net S: Maintained F: drivers/edac/i5000_edac.c EDAC-I5400 -P: Mauro Carvalho Chehab -M: mchehab@redhat.com +M: Mauro Carvalho Chehab L: bluesmoke-devel@lists.sourceforge.net (moderated for non-subscribers) W: bluesmoke.sourceforge.net S: Maintained F: drivers/edac/i5400_edac.c EDAC-I82975X -P: Ranganathan Desikan -M: ravi@jetztechnologies.com -P: Arvind R. -M: arvind@jetztechnologies.com +M: Ranganathan Desikan +M: "Arvind R." L: bluesmoke-devel@lists.sourceforge.net (moderated for non-subscribers) W: bluesmoke.sourceforge.net S: Maintained F: drivers/edac/i82975x_edac.c EDAC-PASEMI -P: Egor Martovetsky -M: egor@pasemi.com +M: Egor Martovetsky L: bluesmoke-devel@lists.sourceforge.net (moderated for non-subscribers) W: bluesmoke.sourceforge.net S: Maintained F: drivers/edac/pasemi_edac.c EDAC-R82600 -P: Tim Small -M: tim@buttersideup.com +M: Tim Small L: bluesmoke-devel@lists.sourceforge.net (moderated for non-subscribers) W: bluesmoke.sourceforge.net S: Maintained F: drivers/edac/r82600_edac.c EEEPC LAPTOP EXTRAS DRIVER -P: Corentin Chary -M: corentincj@iksaif.net +M: Corentin Chary L: acpi4asus-user@lists.sourceforge.net W: http://acpi4asus.sf.net S: Maintained @@ -2157,65 +1864,53 @@ S: Orphan F: fs/efs/ EHCA (IBM GX bus InfiniBand adapter) DRIVER -P: Hoang-Nam Nguyen -M: hnguyen@de.ibm.com -P: Christoph Raisch -M: raisch@de.ibm.com +M: Hoang-Nam Nguyen +M: Christoph Raisch L: general@lists.openfabrics.org S: Supported F: drivers/infiniband/hw/ehca/ EMBEDDED LINUX -P: Paul Gortmaker -M: paul.gortmaker@windriver.com -P: Matt Mackall -M: mpm@selenic.com -P: David Woodhouse -M: dwmw2@infradead.org +M: Paul Gortmaker +M: Matt Mackall +M: David Woodhouse L: linux-embedded@vger.kernel.org S: Maintained EMULEX LPFC FC SCSI DRIVER -P: James Smart -M: james.smart@emulex.com +M: James Smart L: linux-scsi@vger.kernel.org W: http://sourceforge.net/projects/lpfcxxxx S: Supported F: drivers/scsi/lpfc/ ENE CB710 FLASH CARD READER DRIVER -P: Michał Mirosław -M: mirq-linux@rere.qmqm.pl +M: Michał Mirosław S: Maintained F: drivers/misc/cb710/ F: drivers/mmc/host/cb710-mmc.* F: include/linux/cb710.h EPSON 1355 FRAMEBUFFER DRIVER -P: Christopher Hoover -M: ch@murgatroid.com -P: Christopher Hoover -M: ch@hpl.hp.com +M: Christopher Hoover +M: Christopher Hoover S: Maintained F: drivers/video/epson1355fb.c EPSON S1D13XXX FRAMEBUFFER DRIVER -P: Kristoffer Ericson -M: kristoffer.ericson@gmail.com +M: Kristoffer Ericson S: Maintained F: drivers/video/s1d13xxxfb.c F: include/video/s1d13xxxfb.h ETHEREXPRESS-16 NETWORK DRIVER -P: Philip Blundell -M: philb@gnu.org +M: Philip Blundell L: netdev@vger.kernel.org S: Maintained F: drivers/net/eexpress.* ETHERNET BRIDGE -P: Stephen Hemminger -M: shemminger@linux-foundation.org +M: Stephen Hemminger L: bridge@lists.linux-foundation.org W: http://www.linux-foundation.org/en/Net:Bridge S: Maintained @@ -2223,8 +1918,7 @@ F: include/linux/netfilter_bridge/ F: net/bridge/ ETHERTEAM 16I DRIVER -P: Mika Kuoppala -M: miku@iki.fi +M: Mika Kuoppala S: Maintained F: drivers/net/eth16i.c @@ -2236,12 +1930,9 @@ F: fs/ext2/ F: include/linux/ext2* EXT3 FILE SYSTEM -P: Stephen Tweedie -M: sct@redhat.com -P: Andrew Morton -M: akpm@linux-foundation.org -P: Andreas Dilger -M: adilger@sun.com +M: Stephen Tweedie +M: Andrew Morton +M: Andreas Dilger L: linux-ext4@vger.kernel.org S: Maintained F: Documentation/filesystems/ext3.txt @@ -2249,10 +1940,8 @@ F: fs/ext3/ F: include/linux/ext3* EXT4 FILE SYSTEM -P: Theodore Ts'o -M: tytso@mit.edu -P: Andreas Dilger -M: adilger@sun.com +M: "Theodore Ts'o" +M: Andreas Dilger L: linux-ext4@vger.kernel.org W: http://ext4.wiki.kernel.org S: Maintained @@ -2260,30 +1949,26 @@ F: Documentation/filesystems/ext4.txt F: fs/ext4/ F71805F HARDWARE MONITORING DRIVER -P: Jean Delvare -M: khali@linux-fr.org +M: Jean Delvare L: lm-sensors@lm-sensors.org S: Maintained F: Documentation/hwmon/f71805f F: drivers/hwmon/f71805f.c FARSYNC SYNCHRONOUS DRIVER -P: Kevin Curtis -M: kevin.curtis@farsite.co.uk +M: Kevin Curtis W: http://www.farsite.co.uk/ S: Supported F: drivers/net/wan/farsync.* FAULT INJECTION SUPPORT -P: Akinobu Mita -M: akinobu.mita@gmail.com +M: Akinobu Mita S: Supported F: Documentation/fault-injection/ F: lib/fault-inject.c FILE LOCKING (flock() and fcntl()/lockf()) -P: Matthew Wilcox -M: matthew@wil.cx +M: Matthew Wilcox L: linux-fsdevel@vger.kernel.org S: Maintained F: include/linux/fcntl.h @@ -2292,25 +1977,21 @@ F: fs/fcntl.c F: fs/locks.c FILESYSTEMS (VFS and infrastructure) -P: Alexander Viro -M: viro@zeniv.linux.org.uk +M: Alexander Viro L: linux-fsdevel@vger.kernel.org S: Maintained F: fs/* FINTEK F75375S HARDWARE MONITOR AND FAN CONTROLLER DRIVER -P: Riku Voipio -M: riku.vipio@iki.fi +M: Riku Voipio L: lm-sensors@lm-sensors.org S: Maintained F: drivers/hwmon/f75375s.c F: include/linux/f75375s.h FIREWIRE SUBSYSTEM -P: Kristian Hoegsberg -M: krh@redhat.com -P: Stefan Richter -M: stefanr@s5r6.in-berlin.de +M: Kristian Hoegsberg +M: Stefan Richter L: linux1394-devel@lists.sourceforge.net W: http://www.linux1394.org/ T: git git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394-2.6.git @@ -2325,15 +2006,13 @@ F: drivers/base/firmware*.c F: include/linux/firmware.h FPU EMULATOR -P: Bill Metzenthen -M: billm@melbpc.org.au +M: Bill Metzenthen W: http://floatingpoint.sourceforge.net/emulator/index.html S: Maintained F: arch/x86/math-emu/ FRAME RELAY DLCI/FRAD (Sangoma drivers too) -P: Mike McLagan -M: mike.mclagan@linux.org +M: Mike McLagan L: netdev@vger.kernel.org S: Maintained F: drivers/net/wan/dlci.c @@ -2348,25 +2027,21 @@ F: drivers/video/fb* F: include/linux/fb.h FREESCALE DMA DRIVER -P: Li Yang -M: leoli@freescale.com -P: Zhang Wei -M: zw@zh-kernel.org +M: Li Yang +M: Zhang Wei L: linuxppc-dev@ozlabs.org S: Maintained F: drivers/dma/fsldma.* FREESCALE I2C CPM DRIVER -P: Jochen Friedrich -M: jochen@scram.de +M: Jochen Friedrich L: linuxppc-dev@ozlabs.org L: linux-i2c@vger.kernel.org S: Maintained F: drivers/i2c/busses/i2c-cpm.c FREESCALE IMX / MXC FRAMEBUFFER DRIVER -P: Sascha Hauer -M: kernel@pengutronix.de +M: Sascha Hauer L: linux-fbdev-devel@lists.sourceforge.net (moderated for non-subscribers) L: linux-arm-kernel@lists.arm.linux.org.uk (subscribers-only) S: Maintained @@ -2374,10 +2049,8 @@ F: arch/arm/plat-mxc/include/mach/imxfb.h F: drivers/video/imxfb.c FREESCALE SOC FS_ENET DRIVER -P: Pantelis Antoniou -M: pantelis.antoniou@gmail.com -P: Vitaly Bordug -M: vbordug@ru.mvista.com +M: Pantelis Antoniou +M: Vitaly Bordug L: linuxppc-dev@ozlabs.org L: netdev@vger.kernel.org S: Maintained @@ -2385,39 +2058,34 @@ F: drivers/net/fs_enet/ F: include/linux/fs_enet_pd.h FREESCALE QUICC ENGINE LIBRARY -P: Timur Tabi -M: timur@freescale.com +M: Timur Tabi L: linuxppc-dev@ozlabs.org S: Supported F: arch/powerpc/sysdev/qe_lib/ F: arch/powerpc/include/asm/*qe.h FREESCALE HIGHSPEED USB DEVICE DRIVER -P: Li Yang -M: leoli@freescale.com +M: Li Yang L: linux-usb@vger.kernel.org L: linuxppc-dev@ozlabs.org S: Maintained F: drivers/usb/gadget/fsl_usb2_udc.c FREESCALE QUICC ENGINE UCC ETHERNET DRIVER -P: Li Yang -M: leoli@freescale.com +M: Li Yang L: netdev@vger.kernel.org L: linuxppc-dev@ozlabs.org S: Maintained F: drivers/net/ucc_geth* FREESCALE QUICC ENGINE UCC UART DRIVER -P: Timur Tabi -M: timur@freescale.com +M: Timur Tabi L: linuxppc-dev@ozlabs.org S: Supported F: drivers/serial/ucc_uart.c FREESCALE SOC SOUND DRIVERS -P: Timur Tabi -M: timur@freescale.com +M: Timur Tabi L: alsa-devel@alsa-project.org (moderated for non-subscribers) L: linuxppc-dev@ozlabs.org S: Supported @@ -2425,17 +2093,14 @@ F: sound/soc/fsl/fsl* F: sound/soc/fsl/mpc8610_hpcd.c FREEVXFS FILESYSTEM -P: Christoph Hellwig -M: hch@infradead.org +M: Christoph Hellwig W: ftp://ftp.openlinux.org/pub/people/hch/vxfs S: Maintained F: fs/freevxfs/ FREEZER -P: Pavel Machek -M: pavel@ucw.cz -P: Rafael J. Wysocki -M: rjw@sisk.pl +M: Pavel Machek +M: "Rafael J. Wysocki" L: linux-pm@lists.linux-foundation.org S: Supported F: Documentation/power/freezing-of-tasks.txt @@ -2443,8 +2108,7 @@ F: include/linux/freezer.h F: kernel/freezer.c FS-CACHE: LOCAL CACHING FOR NETWORK FILESYSTEMS -P: David Howells -M: dhowells@redhat.com +M: David Howells L: linux-cachefs@redhat.com S: Supported F: Documentation/filesystems/caching/ @@ -2452,8 +2116,7 @@ F: fs/fscache/ F: include/linux/fscache*.h FTRACE -P: Steven Rostedt -M: rostedt@goodmis.org +M: Steven Rostedt S: Maintained F: Documentation/trace/ftrace.txt F: arch/*/*/*/ftrace.h @@ -2462,21 +2125,18 @@ F: include/*/ftrace.h F: kernel/trace/ FUJITSU FR-V (FRV) PORT -P: David Howells -M: dhowells@redhat.com +M: David Howells S: Maintained F: arch/frv/ FUJITSU LAPTOP EXTRAS -P: Jonathan Woithe -M: jwoithe@physics.adelaide.edu.au +M: Jonathan Woithe L: linux-acpi@vger.kernel.org S: Maintained F: drivers/platform/x86/fujitsu-laptop.c FUSE: FILESYSTEM IN USERSPACE -P: Miklos Szeredi -M: miklos@szeredi.hu +M: Miklos Szeredi L: fuse-devel@lists.sourceforge.net W: http://fuse.sourceforge.net/ S: Maintained @@ -2484,30 +2144,26 @@ F: fs/fuse/ F: include/linux/fuse.h FUTURE DOMAIN TMC-16x0 SCSI DRIVER (16-bit) -P: Rik Faith -M: faith@cs.unc.edu +M: Rik Faith L: linux-scsi@vger.kernel.org S: Odd Fixes (e.g., new signatures) F: drivers/scsi/fdomain.* GDT SCSI DISK ARRAY CONTROLLER DRIVER -P: Achim Leubner -M: achim_leubner@adaptec.com +M: Achim Leubner L: linux-scsi@vger.kernel.org W: http://www.icp-vortex.com/ S: Supported F: drivers/scsi/gdt* GENERIC GPIO I2C DRIVER -P: Haavard Skinnemoen -M: hskinnemoen@atmel.com +M: Haavard Skinnemoen S: Supported F: drivers/i2c/busses/i2c-gpio.c F: include/linux/i2c-gpio.h GENERIC HDLC (WAN) DRIVERS -P: Krzysztof Halasa -M: khc@pm.waw.pl +M: Krzysztof Halasa W: http://www.kernel.org/pub/linux/utils/net/hdlc/ S: Maintained F: drivers/net/wan/c101.c @@ -2519,16 +2175,14 @@ F: drivers/net/wan/pci200syn.c F: drivers/net/wan/wanxl* GENERIC INCLUDE/ASM HEADER FILES -P: Arnd Bergmann -M: arnd@arndb.de +M: Arnd Bergmann L: linux-arch@vger.kernel.org T: git git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic.git S: Maintained F: include/asm-generic GFS2 FILE SYSTEM -P: Steven Whitehouse -M: swhiteho@redhat.com +M: Steven Whitehouse L: cluster-devel@redhat.com W: http://sources.redhat.com/cluster/ T: git git://git.kernel.org/pub/scm/linux/kernel/git/steve/gfs2-2.6-fixes.git @@ -2539,10 +2193,8 @@ F: fs/gfs2/ F: include/linux/gfs2_ondisk.h GIGASET ISDN DRIVERS -P: Hansjoerg Lipp -M: hjlipp@web.de -P: Tilman Schmidt -M: tilman@imap.cc +M: Hansjoerg Lipp +M: Tilman Schmidt L: gigaset307x-common@lists.sourceforge.net W: http://gigaset307x.sourceforge.net/ S: Maintained @@ -2551,8 +2203,7 @@ F: drivers/isdn/gigaset/ F: include/linux/gigaset_dev.h HARD DRIVE ACTIVE PROTECTION SYSTEM (HDAPS) DRIVER -P: Frank Seidel -M: frank@f-seidel.de +M: Frank Seidel L: lm-sensors@lm-sensors.org W: http://www.kernel.org/pub/linux/kernel/people/fseidel/hdaps/ S: Maintained @@ -2564,40 +2215,35 @@ S: Odd Fixes F: drivers/char/hvc_* GSPCA FINEPIX SUBDRIVER -P: Frank Zago -M: frank@zago.net +M: Frank Zago L: linux-media@vger.kernel.org T: git git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6.git S: Maintained F: drivers/media/video/gspca/finepix.c GSPCA M5602 SUBDRIVER -P: Erik Andren -M: erik.andren@gmail.com +M: Erik Andren L: linux-media@vger.kernel.org T: git git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6.git S: Maintained F: drivers/media/video/gspca/m5602/ GSPCA PAC207 SONIXB SUBDRIVER -P: Hans de Goede -M: hdegoede@redhat.com +M: Hans de Goede L: linux-media@vger.kernel.org T: git git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6.git S: Maintained F: drivers/media/video/gspca/pac207.c GSPCA T613 SUBDRIVER -P: Leandro Costantino -M: lcostantino@gmail.com +M: Leandro Costantino L: linux-media@vger.kernel.org T: git git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6.git S: Maintained F: drivers/media/video/gspca/t613.c GSPCA USB WEBCAM DRIVER -P: Jean-Francois Moine -M: moinejf@free.fr +M: Jean-Francois Moine W: http://moinejf.free.fr L: linux-media@vger.kernel.org T: git git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6.git @@ -2617,31 +2263,27 @@ F: drivers/char/hw_random/ F: include/linux/hw_random.h HARMONY SOUND DRIVER -P: Kyle McMartin -M: kyle@mcmartin.ca +M: Kyle McMartin L: linux-parisc@vger.kernel.org S: Maintained F: sound/parisc/harmony.* HAYES ESP SERIAL DRIVER -P: Andrew J. Robinson -M: arobinso@nyx.net +M: "Andrew J. Robinson" W: http://www.nyx.net/~arobinso S: Maintained F: Documentation/serial/hayes-esp.txt F: drivers/char/esp.c HEWLETT-PACKARD SMART2 RAID DRIVER -P: Chirag Kantharia -M: chirag.kantharia@hp.com +M: Chirag Kantharia L: iss_storagedev@hp.com S: Maintained F: Documentation/blockdev/cpqarray.txt F: drivers/block/cpqarray.* HEWLETT-PACKARD SMART CISS RAID DRIVER (cciss) -P: Mike Miller -M: mike.miller@hp.com +M: Mike Miller L: iss_storagedev@hp.com S: Supported F: Documentation/blockdev/cciss.txt @@ -2649,25 +2291,21 @@ F: drivers/block/cciss* F: include/linux/cciss_ioctl.h HFS FILESYSTEM -P: Roman Zippel -M: zippel@linux-m68k.org +M: Roman Zippel S: Maintained F: Documentation/filesystems/hfs.txt F: fs/hfs/ HGA FRAMEBUFFER DRIVER -P: Ferenc Bakonyi -M: fero@drama.obuda.kando.hu +M: Ferenc Bakonyi L: linux-nvidia@lists.surfsouth.com W: http://drama.obuda.kando.hu/~fero/cgi-bin/hgafb.shtml S: Maintained F: drivers/video/hgafb.c HIBERNATION (aka Software Suspend, aka swsusp) -P: Pavel Machek -M: pavel@ucw.cz -P: Rafael J. Wysocki -M: rjw@sisk.pl +M: Pavel Machek +M: "Rafael J. Wysocki" L: linux-pm@lists.linux-foundation.org S: Supported F: arch/x86/power/ @@ -2679,8 +2317,7 @@ F: include/linux/pm.h F: arch/*/include/asm/suspend*.h HID CORE LAYER -P: Jiri Kosina -M: jkosina@suse.cz +M: Jiri Kosina L: linux-input@vger.kernel.org T: git git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid.git S: Maintained @@ -2688,16 +2325,14 @@ F: drivers/hid/ F: include/linux/hid* HIGH-RESOLUTION TIMERS, CLOCKEVENTS, DYNTICKS -P: Thomas Gleixner -M: tglx@linutronix.de +M: Thomas Gleixner S: Maintained F: Documentation/timers/ F: kernel/hrtimer.c F: include/linux/hrtimer.h HIGH-SPEED SCC DRIVER FOR AX.25 -P: Klaus Kudielka -M: klaus.kudielka@ieee.org +M: Klaus Kudielka L: linux-hams@vger.kernel.org W: http://www.nt.tuwien.ac.at/~kkudielk/Linux/ S: Maintained @@ -2705,16 +2340,14 @@ F: drivers/net/hamradio/dmascc.c F: drivers/net/hamradio/scc.c HIGHPOINT ROCKETRAID 3xxx RAID DRIVER -P: HighPoint Linux Team -M: linux@highpoint-tech.com +M: HighPoint Linux Team W: http://www.highpoint-tech.com S: Supported F: Documentation/scsi/hptiop.txt F: drivers/scsi/hptiop.c HIPPI -P: Jes Sorensen -M: jes@trained-monkey.org +M: Jes Sorensen L: linux-hippi@sunsite.dk S: Maintained F: include/linux/hippidevice.h @@ -2722,8 +2355,7 @@ F: include/linux/if_hippi.h F: net/802/hippi.c HOST AP DRIVER -P: Jouni Malinen -M: j@w1.fi +M: Jouni Malinen L: hostap@shmoo.com (subscribers-only) L: linux-wireless@vger.kernel.org W: http://hostap.epitest.fi/ @@ -2731,82 +2363,69 @@ S: Maintained F: drivers/net/wireless/hostap/ HP COMPAQ TC1100 TABLET WMI EXTRAS DRIVER -P: Carlos Corbacho -M: carlos@strangeworlds.co.uk +M: Carlos Corbacho S: Odd Fixes F: drivers/platform/x86/tc1100-wmi.c HP100: Driver for HP 10/100 Mbit/s Voice Grade Network Adapter Series -P: Jaroslav Kysela -M: perex@perex.cz +M: Jaroslav Kysela S: Maintained F: drivers/net/hp100.* HPET: High Precision Event Timers driver -P: Clemens Ladisch -M: clemens@ladisch.de +M: Clemens Ladisch S: Maintained F: Documentation/timers/hpet.txt F: drivers/char/hpet.c F: include/linux/hpet.h HPET: i386 -P: Venkatesh Pallipadi (Venki) -M: venkatesh.pallipadi@intel.com +M: "Venkatesh Pallipadi (Venki)" S: Maintained F: arch/x86/kernel/hpet.c F: arch/x86/include/asm/hpet.h HPET: x86_64 -P: Vojtech Pavlik -M: vojtech@suse.cz +M: Vojtech Pavlik S: Maintained HPET: ACPI -P: Bob Picco -M: bob.picco@hp.com +M: Bob Picco S: Maintained F: drivers/char/hpet.c HPFS FILESYSTEM -P: Mikulas Patocka -M: mikulas@artax.karlin.mff.cuni.cz +M: Mikulas Patocka W: http://artax.karlin.mff.cuni.cz/~mikulas/vyplody/hpfs/index-e.cgi S: Maintained F: fs/hpfs/ HSO 3G MODEM DRIVER -P: Jan Dumon -M: j.dumon@option.com +M: Jan Dumon W: http://www.pharscape.org S: Maintained F: drivers/net/usb/hso.c HTCPEN TOUCHSCREEN DRIVER -P: Pau Oliva Fora -M: pof@eslack.org +M: Pau Oliva Fora L: linux-input@vger.kernel.org S: Maintained F: drivers/input/touchscreen/htcpen.c HUGETLB FILESYSTEM -P: William Irwin -M: wli@holomorphy.com +M: William Irwin S: Maintained F: fs/hugetlbfs/ I2C/SMBUS STUB DRIVER -P: Mark M. Hoffman -M: mhoffman@lightlink.com +M: "Mark M. Hoffman" L: linux-i2c@vger.kernel.org S: Maintained F: drivers/i2c/busses/i2c-stub.c I2C SUBSYSTEM -P: Jean Delvare (PC drivers, core) -M: khali@linux-fr.org -P: Ben Dooks (embedded platforms) -M: ben-linux@fluff.org +M: "Jean Delvare (PC drivers, core)" +M: "Ben Dooks (embedded platforms)" L: linux-i2c@vger.kernel.org W: http://i2c.wiki.kernel.org/ T: quilt kernel.org/pub/linux/kernel/people/jdelvare/linux-2.6/jdelvare-i2c/ @@ -2818,30 +2437,25 @@ F: include/linux/i2c-dev.h F: include/linux/i2c-id.h I2C-TINY-USB DRIVER -P: Till Harbaum -M: till@harbaum.org +M: Till Harbaum L: linux-i2c@vger.kernel.org W: http://www.harbaum.org/till/i2c_tiny_usb S: Maintained F: drivers/i2c/busses/i2c-tiny-usb.c i386 BOOT CODE -P: H. Peter Anvin -M: hpa@zytor.com +M: "H. Peter Anvin" S: Maintained F: arch/x86/boot/ i386 SETUP CODE / CPU ERRATA WORKAROUNDS -P: H. Peter Anvin -M: hpa@zytor.com +M: "H. Peter Anvin" T: git git://git.kernel.org/pub/scm/linux/kernel/git/hpa/linux-2.6-x86setup.git S: Maintained IA64 (Itanium) PLATFORM -P: Tony Luck -M: tony.luck@intel.com -P: Fenghua Yu -M: fenghua.yu@intel.com +M: Tony Luck +M: Fenghua Yu L: linux-ia64@vger.kernel.org W: http://www.ia64-linux.org/ T: git git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux-2.6.git @@ -2849,29 +2463,25 @@ S: Maintained F: arch/ia64/ IBM MCA SCSI SUBSYSTEM DRIVER -P: Michael Lang -M: langa2@kph.uni-mainz.de +M: Michael Lang W: http://www.uni-mainz.de/~langm000/linux.html S: Maintained F: drivers/scsi/ibmmca.c IBM Power Linux RAID adapter -P: Brian King -M: brking@us.ibm.com +M: Brian King S: Supported F: drivers/scsi/ipr.* IBM ServeRAID RAID DRIVER P: Jack Hammer -P: Dave Jeffery -M: ipslinux@adaptec.com +M: Dave Jeffery W: http://www.developer.ibm.com/welcome/netfinity/serveraid.html S: Supported F: drivers/scsi/ips.* IDE SUBSYSTEM -P: David S. Miller -M: davem@davemloft.net +M: "David S. Miller" L: linux-ide@vger.kernel.org T: git git://git.kernel.org/pub/scm/linux/kernel/git/davem/ide-2.6.git S: Maintained @@ -2880,25 +2490,21 @@ F: drivers/ide/ F: include/linux/ide.h IDE/ATAPI DRIVERS -P: Borislav Petkov -M: petkovbb@gmail.com +M: Borislav Petkov L: linux-ide@vger.kernel.org S: Maintained F: Documentation/cdrom/ide-cd F: drivers/ide/ide-cd* IDLE-I7300 -P: Andy Henroid -M: andrew.d.henroid@intel.com +M: Andy Henroid L: linux-pm@lists.linux-foundation.org S: Supported F: drivers/idle/i7300_idle.c IEEE 1394 SUBSYSTEM -P: Ben Collins -M: ben.collins@ubuntu.com -P: Stefan Richter -M: stefanr@s5r6.in-berlin.de +M: Ben Collins +M: Stefan Richter L: linux1394-devel@lists.sourceforge.net W: http://www.linux1394.org/ T: git git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394-2.6.git @@ -2906,19 +2512,15 @@ S: Maintained F: drivers/ieee1394/ IEEE 1394 RAW I/O DRIVER -P: Dan Dennedy -M: dan@dennedy.org -P: Stefan Richter -M: stefanr@s5r6.in-berlin.de +M: Dan Dennedy +M: Stefan Richter L: linux1394-devel@lists.sourceforge.net S: Maintained F: drivers/ieee1394/raw1394* IEEE 802.15.4 SUBSYSTEM -P: Dmitry Eremin-Solenikov -M: dbaryshkov@gmail.com -P: Sergey Lapin -M: slapin@ossfans.org +M: Dmitry Eremin-Solenikov +M: Sergey Lapin L: linux-zigbee-devel@lists.sourceforge.net (moderated for non-subscribers) W: http://apps.sourceforge.net/trac/linux-zigbee T: git git://git.kernel.org/pub/scm/linux/kernel/git/lowpan/lowpan.git @@ -2927,8 +2529,7 @@ F: net/ieee802154/ F: drivers/ieee802154/ INTEGRITY MEASUREMENT ARCHITECTURE (IMA) -P: Mimi Zohar -M: zohar@us.ibm.com +M: Mimi Zohar S: Supported F: security/integrity/ima/ @@ -2938,12 +2539,9 @@ S: Orphan F: drivers/video/imsttfb.c INFINIBAND SUBSYSTEM -P: Roland Dreier -M: rolandd@cisco.com -P: Sean Hefty -M: sean.hefty@intel.com -P: Hal Rosenstock -M: hal.rosenstock@gmail.com +M: Roland Dreier +M: Sean Hefty +M: Hal Rosenstock L: general@lists.openfabrics.org (moderated for non-subscribers) W: http://www.openib.org/ T: git git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband.git @@ -2953,66 +2551,55 @@ F: drivers/infiniband/ F: include/linux/if_infiniband.h INOTIFY -P: John McCutchan -M: john@johnmccutchan.com -P: Robert Love -M: rlove@rlove.org -P: Eric Paris -M: eparis@parisplace.org +M: John McCutchan +M: Robert Love +M: Eric Paris S: Maintained F: Documentation/filesystems/inotify.txt F: fs/notify/inotify/ F: include/linux/inotify.h INPUT (KEYBOARD, MOUSE, JOYSTICK, TOUCHSCREEN) DRIVERS -P: Dmitry Torokhov -M: dmitry.torokhov@gmail.com -P: Dmitry Torokhov -M: dtor@mail.ru +M: Dmitry Torokhov +M: Dmitry Torokhov L: linux-input@vger.kernel.org T: git git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input.git S: Maintained F: drivers/input/ INTEL FRAMEBUFFER DRIVER (excluding 810 and 815) -P: Sylvain Meyer -M: sylvain.meyer@worldonline.fr +M: Sylvain Meyer L: linux-fbdev-devel@lists.sourceforge.net (moderated for non-subscribers) S: Maintained F: Documentation/fb/intelfb.txt F: drivers/video/intelfb/ INTEL 810/815 FRAMEBUFFER DRIVER -P: Antonino Daplas -M: adaplas@gmail.com +M: Antonino Daplas L: linux-fbdev-devel@lists.sourceforge.net (moderated for non-subscribers) S: Maintained F: drivers/video/i810/ INTEL MENLOW THERMAL DRIVER -P: Sujith Thomas -M: sujith.thomas@intel.com +M: Sujith Thomas L: linux-acpi@vger.kernel.org W: http://www.lesswatts.org/projects/acpi/ S: Supported F: drivers/platform/x86/intel_menlow.c INTEL IA32 MICROCODE UPDATE SUPPORT -P: Tigran Aivazian -M: tigran@aivazian.fsnet.co.uk +M: Tigran Aivazian S: Maintained F: arch/x86/kernel/microcode_core.c F: arch/x86/kernel/microcode_intel.c INTEL I/OAT DMA DRIVER -P: Maciej Sosnowski -M: maciej.sosnowski@intel.com +M: Maciej Sosnowski S: Supported F: drivers/dma/ioat* INTEL IOMMU (VT-d) -P: David Woodhouse -M: dwmw2@infradead.org +M: David Woodhouse L: iommu@lists.linux-foundation.org T: git git://git.infradead.org/iommu-2.6.git S: Supported @@ -3020,14 +2607,12 @@ F: drivers/pci/intel-iommu.c F: include/linux/intel-iommu.h INTEL IOP-ADMA DMA DRIVER -P: Dan Williams -M: dan.j.williams@intel.com +M: Dan Williams S: Supported F: drivers/dma/iop-adma.c INTEL IXP4XX QMGR, NPE, ETHERNET and HSS SUPPORT -P: Krzysztof Halasa -M: khc@pm.waw.pl +M: Krzysztof Halasa S: Maintained F: arch/arm/mach-ixp4xx/include/mach/qmgr.h F: arch/arm/mach-ixp4xx/include/mach/npe.h @@ -3037,29 +2622,22 @@ F: drivers/net/arm/ixp4xx_eth.c F: drivers/net/wan/ixp4xx_hss.c INTEL IXP4XX RANDOM NUMBER GENERATOR SUPPORT -P: Deepak Saxena -M: dsaxena@plexity.net +M: Deepak Saxena S: Maintained F: drivers/char/hw_random/ixp4xx-rng.c INTEL IXP2000 ETHERNET DRIVER -P: Lennert Buytenhek -M: kernel@wantstofly.org +M: Lennert Buytenhek L: netdev@vger.kernel.org S: Maintained F: drivers/net/ixp2000/ INTEL ETHERNET DRIVERS (e100/e1000/e1000e/igb/ixgb/ixgbe) -P: Jeff Kirsher -M: jeffrey.t.kirsher@intel.com -P: Jesse Brandeburg -M: jesse.brandeburg@intel.com -P: Bruce Allan -M: bruce.w.allan@intel.com -P: PJ Waskiewicz -M: peter.p.waskiewicz.jr@intel.com -P: John Ronciak -M: john.ronciak@intel.com +M: Jeff Kirsher +M: Jesse Brandeburg +M: Bruce Allan +M: PJ Waskiewicz +M: John Ronciak L: e1000-devel@lists.sourceforge.net W: http://e1000.sourceforge.net/ S: Supported @@ -3071,12 +2649,9 @@ F: drivers/net/ixgb/ F: drivers/net/ixgbe/ INTEL PRO/WIRELESS 2100 NETWORK CONNECTION SUPPORT -P: Zhu Yi -M: yi.zhu@intel.com -P: James Ketrenos -M: jketreno@linux.intel.com -P: Reinette Chatre -M: reinette.chatre@intel.com +M: Zhu Yi +M: James Ketrenos +M: Reinette Chatre L: linux-wireless@vger.kernel.org L: ipw2100-devel@lists.sourceforge.net W: http://lists.sourceforge.net/mailman/listinfo/ipw2100-devel @@ -3086,12 +2661,9 @@ F: Documentation/networking/README.ipw2100 F: drivers/net/wireless/ipw2x00/ipw2100.* INTEL PRO/WIRELESS 2915ABG NETWORK CONNECTION SUPPORT -P: Zhu Yi -M: yi.zhu@intel.com -P: James Ketrenos -M: jketreno@linux.intel.com -P: Reinette Chatre -M: reinette.chatre@intel.com +M: Zhu Yi +M: James Ketrenos +M: Reinette Chatre L: linux-wireless@vger.kernel.org L: ipw2100-devel@lists.sourceforge.net W: http://lists.sourceforge.net/mailman/listinfo/ipw2100-devel @@ -3101,8 +2673,7 @@ F: Documentation/networking/README.ipw2200 F: drivers/net/wireless/ipw2x00/ipw2200.* INTEL WIRELESS WIMAX CONNECTION 2400 -P: Inaky Perez-Gonzalez -M: inaky.perez-gonzalez@intel.com +M: Inaky Perez-Gonzalez M: linux-wimax@intel.com L: wimax@linuxwimax.org S: Supported @@ -3112,10 +2683,8 @@ F: drivers/net/wimax/i2400m/ F: include/linux/wimax/i2400m.h INTEL WIRELESS WIFI LINK (iwlwifi) -P: Zhu Yi -M: yi.zhu@intel.com -P: Reinette Chatre -M: reinette.chatre@intel.com +M: Zhu Yi +M: Reinette Chatre L: linux-wireless@vger.kernel.org L: ipw3945-devel@lists.sourceforge.net W: http://intellinuxwireless.org @@ -3124,47 +2693,39 @@ S: Supported F: drivers/net/wireless/iwlwifi/ IOC3 ETHERNET DRIVER -P: Ralf Baechle -M: ralf@linux-mips.org +M: Ralf Baechle L: linux-mips@linux-mips.org S: Maintained F: drivers/net/ioc3-eth.c IOC3 SERIAL DRIVER -P: Pat Gefre -M: pfg@sgi.com +M: Pat Gefre L: linux-mips@linux-mips.org S: Maintained F: drivers/serial/ioc3_serial.c IP MASQUERADING -P: Juanjo Ciarlante -M: jjciarla@raiz.uncu.edu.ar +M: Juanjo Ciarlante S: Maintained F: net/ipv4/netfilter/ipt_MASQUERADE.c IP1000A 10/100/1000 GIGABIT ETHERNET DRIVER -P: Francois Romieu -M: romieu@fr.zoreil.com -P: Sorbica Shieh -M: sorbica@icplus.com.tw -P: Jesse Huang -M: jesse@icplus.com.tw +M: Francois Romieu +M: Sorbica Shieh +M: Jesse Huang L: netdev@vger.kernel.org S: Maintained F: drivers/net/ipg.c IPATH DRIVER -P: Ralph Campbell -M: infinipath@qlogic.com +M: Ralph Campbell L: general@lists.openfabrics.org T: git git://git.qlogic.com/ipath-linux-2.6 S: Supported F: drivers/infiniband/hw/ipath/ IPMI SUBSYSTEM -P: Corey Minyard -M: minyard@acm.org +M: Corey Minyard L: openipmi-developer@lists.sourceforge.net W: http://openipmi.sourceforge.net/ S: Supported @@ -3173,20 +2734,16 @@ F: drivers/char/ipmi/ F: include/linux/ipmi* IPS SCSI RAID DRIVER -P: Adaptec OEM Raid Solutions -M: aacraid@adaptec.com +M: Adaptec OEM Raid Solutions L: linux-scsi@vger.kernel.org W: http://www.adaptec.com/ S: Maintained F: drivers/scsi/ips* IPVS -P: Wensong Zhang -M: wensong@linux-vs.org -P: Simon Horman -M: horms@verge.net.au -P: Julian Anastasov -M: ja@ssi.bg +M: Wensong Zhang +M: Simon Horman +M: Julian Anastasov L: netdev@vger.kernel.org L: lvs-devel@vger.kernel.org S: Maintained @@ -3194,17 +2751,14 @@ F: Documentation/networking/ipvs-sysctl.txt F: net/netfilter/ipvs/ IPWIRELESS DRIVER -P: Jiri Kosina -M: jkosina@suse.cz -P: David Sterba -M: dsterba@suse.cz +M: Jiri Kosina +M: David Sterba S: Maintained T: git git://git.kernel.org/pub/scm/linux/kernel/git/jikos/ipwireless_cs.git F: drivers/char/pcmcia/ipwireless/ IPX NETWORK LAYER -P: Arnaldo Carvalho de Melo -M: acme@ghostprotocols.net +M: Arnaldo Carvalho de Melo L: netdev@vger.kernel.org S: Maintained F: include/linux/ipx.h @@ -3212,8 +2766,7 @@ F: include/net/ipx.h F: net/ipx/ IRDA SUBSYSTEM -P: Samuel Ortiz -M: samuel@sortiz.org +M: Samuel Ortiz L: irda-users@lists.sourceforge.net (subscribers-only) W: http://irda.sourceforge.net/ S: Maintained @@ -3224,16 +2777,14 @@ F: include/net/irda/ F: net/irda/ ISAPNP -P: Jaroslav Kysela -M: perex@perex.cz +M: Jaroslav Kysela S: Maintained F: Documentation/isapnp.txt F: drivers/pnp/isapnp/ F: include/linux/isapnp.h ISCSI -P: Mike Christie -M: michaelc@cs.wisc.edu +M: Mike Christie L: open-iscsi@googlegroups.com W: www.open-iscsi.org T: git git://git.kernel.org/pub/scm/linux/kernel/git/mnc/linux-2.6-iscsi.git @@ -3242,8 +2793,7 @@ F: drivers/scsi/*iscsi* F: include/scsi/*iscsi* ISDN SUBSYSTEM -P: Karsten Keil -M: isdn@linux-pingi.de +M: Karsten Keil L: isdn4linux@listserv.isdn4linux.de (subscribers-only) W: http://www.isdn4linux.de T: git git://git.kernel.org/pub/scm/linux/kernel/git/kkeil/isdn-2.6.git @@ -3254,16 +2804,14 @@ F: include/linux/isdn.h F: include/linux/isdn/ ISDN SUBSYSTEM (Eicon active card driver) -P: Armin Schindler -M: mac@melware.de +M: Armin Schindler L: isdn4linux@listserv.isdn4linux.de (subscribers-only) W: http://www.melware.de S: Maintained F: drivers/isdn/hardware/eicon/ IVTV VIDEO4LINUX DRIVER -P: Hans Verkuil -M: hverkuil@xs4all.nl +M: Hans Verkuil L: ivtv-devel@ivtvdriver.org L: linux-media@vger.kernel.org T: git git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6.git @@ -3274,8 +2822,7 @@ F: drivers/media/video/ivtv/ F: include/linux/ivtv* JFS FILESYSTEM -P: Dave Kleikamp -M: shaggy@linux.vnet.ibm.com +M: Dave Kleikamp L: jfs-discussion@lists.sourceforge.net W: http://jfs.sourceforge.net/ T: git git://git.kernel.org/pub/scm/linux/kernel/git/shaggy/jfs-2.6.git @@ -3284,15 +2831,13 @@ F: Documentation/filesystems/jfs.txt F: fs/jfs/ JME NETWORK DRIVER -P: Guo-Fu Tseng -M: cooldavid@cooldavid.org +M: Guo-Fu Tseng L: netdev@vger.kernel.org S: Maintained F: drivers/net/jme.* JOURNALLING FLASH FILE SYSTEM V2 (JFFS2) -P: David Woodhouse -M: dwmw2@infradead.org +M: David Woodhouse L: linux-mtd@lists.infradead.org W: http://www.linux-mtd.infradead.org/doc/jffs2.html S: Maintained @@ -3300,10 +2845,8 @@ F: fs/jffs2/ F: include/linux/jffs2.h JOURNALLING LAYER FOR BLOCK DEVICES (JBD) -P: Stephen Tweedie -M: sct@redhat.com -P: Andrew Morton -M: akpm@linux-foundation.org +M: Stephen Tweedie +M: Andrew Morton L: linux-ext4@vger.kernel.org S: Maintained F: fs/jbd*/ @@ -3311,48 +2854,41 @@ F: include/linux/ext*jbd*.h F: include/linux/jbd*.h K8TEMP HARDWARE MONITORING DRIVER -P: Rudolf Marek -M: r.marek@assembler.cz +M: Rudolf Marek L: lm-sensors@lm-sensors.org S: Maintained F: Documentation/hwmon/k8temp F: drivers/hwmon/k8temp.c KCONFIG -P: Roman Zippel -M: zippel@linux-m68k.org +M: Roman Zippel L: linux-kbuild@vger.kernel.org S: Maintained F: Documentation/kbuild/kconfig-language.txt F: scripts/kconfig/ KDUMP -P: Vivek Goyal -M: vgoyal@redhat.com -P: Haren Myneni -M: hbabu@us.ibm.com +M: Vivek Goyal +M: Haren Myneni L: kexec@lists.infradead.org W: http://lse.sourceforge.net/kdump/ S: Maintained F: Documentation/kdump/ KERNEL AUTOMOUNTER (AUTOFS) -P: H. Peter Anvin -M: hpa@zytor.com +M: "H. Peter Anvin" L: autofs@linux.kernel.org S: Odd Fixes F: fs/autofs/ KERNEL AUTOMOUNTER v4 (AUTOFS4) -P: Ian Kent -M: raven@themaw.net +M: Ian Kent L: autofs@linux.kernel.org S: Maintained F: fs/autofs4/ KERNEL BUILD -P: Sam Ravnborg -M: sam@ravnborg.org +M: Sam Ravnborg T: git git://git.kernel.org/pub/scm/linux/kernel/git/sam/kbuild-next.git T: git git://git.kernel.org/pub/scm/linux/kernel/git/sam/kbuild-fixes.git L: linux-kbuild@vger.kernel.org @@ -3367,10 +2903,8 @@ W: http://www.kerneljanitors.org/ S: Odd fixes KERNEL NFSD, SUNRPC, AND LOCKD SERVERS -P: J. Bruce Fields -M: bfields@fieldses.org -P: Neil Brown -M: neilb@suse.de +M: "J. Bruce Fields" +M: Neil Brown L: linux-nfs@vger.kernel.org W: http://nfs.sourceforge.net/ S: Supported @@ -3383,8 +2917,7 @@ F: include/linux/lockd/ F: include/linux/sunrpc/ KERNEL VIRTUAL MACHINE (KVM) -P: Avi Kivity -M: avi@redhat.com +M: Avi Kivity L: kvm@vger.kernel.org W: http://kvm.qumranet.com S: Supported @@ -3395,8 +2928,7 @@ F: include/linux/kvm* F: virt/kvm/ KERNEL VIRTUAL MACHINE (KVM) FOR AMD-V -P: Joerg Roedel -M: joerg.roedel@amd.com +M: Joerg Roedel L: kvm@vger.kernel.org W: http://kvm.qumranet.com S: Supported @@ -3405,8 +2937,7 @@ F: arch/x86/kvm/kvm_svm.h F: arch/x86/kvm/svm.c KERNEL VIRTUAL MACHINE (KVM) FOR POWERPC -P: Hollis Blanchard -M: hollisb@us.ibm.com +M: Hollis Blanchard L: kvm-ppc@vger.kernel.org W: http://kvm.qumranet.com S: Supported @@ -3414,8 +2945,7 @@ F: arch/powerpc/include/asm/kvm* F: arch/powerpc/kvm/ KERNEL VIRTUAL MACHINE For Itanium (KVM/IA64) -P: Xiantao Zhang -M: xiantao.zhang@intel.com +M: Xiantao Zhang L: kvm-ia64@vger.kernel.org W: http://kvm.qumranet.com S: Supported @@ -3424,10 +2954,8 @@ F: arch/ia64/include/asm/kvm* F: arch/ia64/kvm/ KERNEL VIRTUAL MACHINE for s390 (KVM/s390) -P: Carsten Otte -M: cotte@de.ibm.com -P: Christian Borntraeger -M: borntraeger@de.ibm.com +M: Carsten Otte +M: Christian Borntraeger M: linux390@de.ibm.com L: linux-s390@vger.kernel.org W: http://www.ibm.com/developerworks/linux/linux390/ @@ -3437,8 +2965,7 @@ F: arch/s390/include/asm/kvm* F: arch/s390/kvm/ KEXEC -P: Eric Biederman -M: ebiederm@xmission.com +M: Eric Biederman W: http://ftp.kernel.org/pub/linux/kernel/people/horms/kexec-tools/ L: kexec@lists.infradead.org S: Maintained @@ -3446,8 +2973,7 @@ F: include/linux/kexec.h F: kernel/kexec.c KGDB -P: Jason Wessel -M: jason.wessel@windriver.com +M: Jason Wessel L: kgdb-bugreport@lists.sourceforge.net S: Maintained F: Documentation/DocBook/kgdb.tmpl @@ -3457,15 +2983,13 @@ F: include/linux/kgdb.h F: kernel/kgdb.c KMEMCHECK -P: Vegard Nossum -M: vegardno@ifi.uio.no +M: Vegard Nossum P Pekka Enberg M: penberg@cs.helsinki.fi S: Maintained KMEMLEAK -P: Catalin Marinas -M: catalin.marinas@arm.com +M: Catalin Marinas S: Maintained F: Documentation/kmemleak.txt F: include/linux/kmemleak.h @@ -3473,30 +2997,24 @@ F: mm/kmemleak.c F: mm/kmemleak-test.c KMEMTRACE -P: Eduard - Gabriel Munteanu -M: eduard.munteanu@linux360.ro +M: Eduard - Gabriel Munteanu S: Maintained F: Documentation/trace/kmemtrace.txt F: include/linux/kmemtrace.h F: kernel/trace/kmemtrace.c KPROBES -P: Ananth N Mavinakayanahalli -M: ananth@in.ibm.com -P: Anil S Keshavamurthy -M: anil.s.keshavamurthy@intel.com -P: David S. Miller -M: davem@davemloft.net -P: Masami Hiramatsu -M: mhiramat@redhat.com +M: Ananth N Mavinakayanahalli +M: Anil S Keshavamurthy +M: "David S. Miller" +M: Masami Hiramatsu S: Maintained F: Documentation/kprobes.txt F: include/linux/kprobes.h F: kernel/kprobes.c KS0108 LCD CONTROLLER DRIVER -P: Miguel Ojeda Sandonis -M: miguel.ojeda.sandonis@gmail.com +M: Miguel Ojeda Sandonis W: http://miguelojeda.es/auxdisplay.htm W: http://jair.lab.fi.uva.es/~migojed/auxdisplay.htm S: Maintained @@ -3512,31 +3030,27 @@ F: include/*/lapb.h F: net/lapb/ LASI 53c700 driver for PARISC -P: James E.J. Bottomley -M: James.Bottomley@HansenPartnership.com +M: "James E.J. Bottomley" L: linux-scsi@vger.kernel.org S: Maintained F: Documentation/scsi/53c700.txt F: drivers/scsi/53c700* LED SUBSYSTEM -P: Richard Purdie -M: rpurdie@rpsys.net +M: Richard Purdie S: Maintained F: drivers/leds/ F: include/linux/leds.h LEGO USB Tower driver -P: Juergen Stuber -M: starblue@users.sourceforge.net +M: Juergen Stuber L: legousb-devel@lists.sourceforge.net W: http://legousb.sourceforge.net/ S: Maintained F: drivers/usb/misc/legousbtower.c LGUEST -P: Rusty Russell -M: rusty@rustcorp.com.au +M: Rusty Russell L: lguest@ozlabs.org W: http://lguest.ozlabs.org/ S: Maintained @@ -3547,119 +3061,100 @@ F: include/linux/lguest*.h F: arch/x86/include/asm/lguest*.h LINUX FOR IBM pSERIES (RS/6000) -P: Paul Mackerras -M: paulus@au.ibm.com +M: Paul Mackerras W: http://www.ibm.com/linux/ltc/projects/ppc S: Supported LINUX FOR POWERPC (32-BIT AND 64-BIT) -P: Benjamin Herrenschmidt -M: benh@kernel.crashing.org -P: Paul Mackerras -M: paulus@samba.org +M: Benjamin Herrenschmidt +M: Paul Mackerras W: http://www.penguinppc.org/ L: linuxppc-dev@ozlabs.org T: git git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc.git S: Supported LINUX FOR POWER MACINTOSH -P: Benjamin Herrenschmidt -M: benh@kernel.crashing.org +M: Benjamin Herrenschmidt W: http://www.penguinppc.org/ L: linuxppc-dev@ozlabs.org S: Maintained LINUX FOR POWERPC EMBEDDED MPC5XXX -P: Grant Likely -M: grant.likely@secretlab.ca +M: Grant Likely L: linuxppc-dev@ozlabs.org T: git git://git.secretlab.ca/git/linux-2.6.git S: Maintained LINUX FOR POWERPC EMBEDDED PPC4XX -P: Josh Boyer -M: jwboyer@linux.vnet.ibm.com -P: Matt Porter -M: mporter@kernel.crashing.org +M: Josh Boyer +M: Matt Porter W: http://www.penguinppc.org/ L: linuxppc-dev@ozlabs.org T: git git://git.kernel.org/pub/scm/linux/kernel/git/jwboyer/powerpc-4xx.git S: Maintained LINUX FOR POWERPC EMBEDDED XILINX VIRTEX -P: Grant Likely -M: grant.likely@secretlab.ca +M: Grant Likely W: http://wiki.secretlab.ca/index.php/Linux_on_Xilinx_Virtex L: linuxppc-dev@ozlabs.org T: git git://git.secretlab.ca/git/linux-2.6.git S: Maintained LINUX FOR POWERPC EMBEDDED PPC8XX -P: Vitaly Bordug -M: vitb@kernel.crashing.org -P: Marcelo Tosatti -M: marcelo@kvack.org +M: Vitaly Bordug +M: Marcelo Tosatti W: http://www.penguinppc.org/ L: linuxppc-dev@ozlabs.org S: Maintained LINUX FOR POWERPC EMBEDDED PPC83XX AND PPC85XX -P: Kumar Gala -M: galak@kernel.crashing.org +M: Kumar Gala W: http://www.penguinppc.org/ L: linuxppc-dev@ozlabs.org S: Maintained LINUX FOR POWERPC PA SEMI PWRFICIENT -P: Olof Johansson -M: olof@lixom.net +M: Olof Johansson W: http://www.pasemi.com/ L: linuxppc-dev@ozlabs.org S: Supported LINUX SECURITY MODULE (LSM) FRAMEWORK -P: Chris Wright -M: chrisw@sous-sol.org +M: Chris Wright L: linux-security-module@vger.kernel.org T: git git://git.kernel.org/pub/scm/linux/kernel/git/chrisw/lsm-2.6.git S: Supported LLC (802.2) -P: Arnaldo Carvalho de Melo -M: acme@ghostprotocols.net +M: Arnaldo Carvalho de Melo S: Maintained F: include/linux/llc.h F: include/net/llc* F: net/llc/ LIS3LV02D ACCELEROMETER DRIVER -P: Eric Piel -M: eric.piel@tremplin-utc.net +M: Eric Piel S: Maintained F: Documentation/hwmon/lis3lv02d F: drivers/hwmon/lis3lv02d.* LM83 HARDWARE MONITOR DRIVER -P: Jean Delvare -M: khali@linux-fr.org +M: Jean Delvare L: lm-sensors@lm-sensors.org S: Maintained F: Documentation/hwmon/lm83 F: drivers/hwmon/lm83.c LM90 HARDWARE MONITOR DRIVER -P: Jean Delvare -M: khali@linux-fr.org +M: Jean Delvare L: lm-sensors@lm-sensors.org S: Maintained F: Documentation/hwmon/lm90 F: drivers/hwmon/lm90.c LOCKDEP AND LOCKSTAT -P: Peter Zijlstra -M: peterz@infradead.org -P: Ingo Molnar -M: mingo@redhat.com +M: Peter Zijlstra +M: Ingo Molnar T: git git://git.kernel.org/pub/scm/linux/kernel/git/peterz/linux-2.6-lockdep.git S: Maintained F: Documentation/lockdep*.txt @@ -3668,8 +3163,7 @@ F: include/linux/lockdep.h F: kernel/lockdep* LOGICAL DISK MANAGER SUPPORT (LDM, Windows 2000/XP/Vista Dynamic Disks) -P: Richard Russon (FlatCap) -M: ldm@flatcap.org +M: "Richard Russon (FlatCap)" L: linux-ntfs-dev@lists.sourceforge.net W: http://www.linux-ntfs.org/content/view/19/37/ S: Maintained @@ -3677,8 +3171,7 @@ F: Documentation/ldm.txt F: fs/partitions/ldm.* LSILOGIC MPT FUSION DRIVERS (FC/SAS/SPI) -P: Eric Moore -M: Eric.Moore@lsi.com +M: Eric Moore M: support@lsi.com L: DL-MPTFusionLinux@lsi.com L: linux-scsi@vger.kernel.org @@ -3687,25 +3180,21 @@ S: Supported F: drivers/message/fusion/ LSILOGIC/SYMBIOS/NCR 53C8XX and 53C1010 PCI-SCSI drivers -P: Matthew Wilcox -M: matthew@wil.cx +M: Matthew Wilcox L: linux-scsi@vger.kernel.org S: Maintained F: drivers/scsi/sym53c8xx_2/ LTP (Linux Test Project) -P: Subrata Modak -M: subrata@linux.vnet.ibm.com -P: Mike Frysinger -M: vapier@gentoo.org +M: Subrata Modak +M: Mike Frysinger L: ltp-list@lists.sourceforge.net (subscribers-only) W: http://ltp.sourceforge.net/ T: git git://git.kernel.org/pub/scm/linux/kernel/git/galak/ltp.git S: Maintained M32R ARCHITECTURE -P: Hirokazu Takata -M: takata@linux-m32r.org +M: Hirokazu Takata L: linux-m32r@ml.linux-m32r.org L: linux-m32r-ja@ml.linux-m32r.org (in Japanese) W: http://www.linux-m32r.org/ @@ -3713,10 +3202,8 @@ S: Maintained F: arch/m32r/ M68K ARCHITECTURE -P: Geert Uytterhoeven -M: geert@linux-m68k.org -P: Roman Zippel -M: zippel@linux-m68k.org +M: Geert Uytterhoeven +M: Roman Zippel L: linux-m68k@lists.linux-m68k.org W: http://www.linux-m68k.org/ T: git git://git.kernel.org/pub/scm/linux/kernel/git/geert/linux-m68k.git @@ -3725,23 +3212,20 @@ F: arch/m68k/ F: drivers/zorro/ M68K ON APPLE MACINTOSH -P: Joshua Thompson -M: funaho@jurai.org +M: Joshua Thompson W: http://www.mac.linux-m68k.org/ L: linux-m68k@lists.linux-m68k.org S: Maintained F: arch/m68k/mac/ M68K ON HP9000/300 -P: Philip Blundell -M: philb@gnu.org +M: Philip Blundell W: http://www.tazenda.demon.co.uk/phil/linux-hp S: Maintained F: arch/m68k/hp300/ MAC80211 -P: Johannes Berg -M: johannes@sipsolutions.net +M: Johannes Berg L: linux-wireless@vger.kernel.org W: http://linuxwireless.org/ T: git git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-2.6.git @@ -3751,10 +3235,8 @@ F: include/net/mac80211.h F: net/mac80211/ MAC80211 PID RATE CONTROL -P: Stefano Brivio -M: stefano.brivio@polimi.it -P: Mattias Nissler -M: mattias.nissler@gmx.de +M: Stefano Brivio +M: Mattias Nissler L: linux-wireless@vger.kernel.org W: http://linuxwireless.org/en/developers/Documentation/mac80211/RateControl/PID T: git git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-2.6.git @@ -3762,67 +3244,57 @@ S: Maintained F: net/mac80211/rc80211_pid* MACVLAN DRIVER -P: Patrick McHardy -M: kaber@trash.net +M: Patrick McHardy L: netdev@vger.kernel.org S: Maintained F: drivers/net/macvlan.c F: include/linux/if_macvlan.h MAN-PAGES: MANUAL PAGES FOR LINUX -- Sections 2, 3, 4, 5, and 7 -P: Michael Kerrisk -M: mtk.manpages@gmail.com +M: Michael Kerrisk W: http://www.kernel.org/doc/man-pages L: linux-man@vger.kernel.org S: Maintained MARVELL LIBERTAS WIRELESS DRIVER -P: Dan Williams -M: dcbw@redhat.com +M: Dan Williams L: libertas-dev@lists.infradead.org S: Maintained F: drivers/net/wireless/libertas/ MARVELL MV643XX ETHERNET DRIVER -P: Lennert Buytenhek -M: buytenh@marvell.com +M: Lennert Buytenhek L: netdev@vger.kernel.org S: Supported F: drivers/net/mv643xx_eth.* F: include/linux/mv643xx.h MARVELL SOC MMC/SD/SDIO CONTROLLER DRIVER -P: Nicolas Pitre -M: nico@cam.org +M: Nicolas Pitre S: Maintained MARVELL YUKON / SYSKONNECT DRIVER -P: Mirko Lindner -M: mlindner@syskonnect.de -P: Ralph Roesler -M: rroesler@syskonnect.de +M: Mirko Lindner +M: Ralph Roesler W: http://www.syskonnect.com S: Supported MATROX FRAMEBUFFER DRIVER -P: Petr Vandrovec -M: vandrove@vc.cvut.cz +M: Petr Vandrovec L: linux-fbdev-devel@lists.sourceforge.net (moderated for non-subscribers) S: Maintained F: drivers/video/matrox/matroxfb_* F: include/linux/matroxfb.h MAX6650 HARDWARE MONITOR AND FAN CONTROLLER DRIVER -P: Hans J. Koch -M: hjk@linutronix.de +M: "Hans J. Koch" L: lm-sensors@lm-sensors.org S: Maintained F: Documentation/hwmon/max6650 F: drivers/hwmon/max6650.c MEDIA INPUT INFRASTRUCTURE (V4L/DVB) -P: Mauro Carvalho Chehab -M: mchehab@infradead.org +M: Mauro Carvalho Chehab P: LinuxTV.org Project L: linux-media@vger.kernel.org W: http://linuxtv.org @@ -3836,8 +3308,7 @@ F: include/linux/dvb/ F: include/linux/videodev*.h MEGARAID SCSI DRIVERS -P: Neela Syam Kolli -M: megaraidlinux@lsi.com +M: Neela Syam Kolli L: linux-scsi@vger.kernel.org W: http://megaraid.lsilogic.com S: Maintained @@ -3853,19 +3324,15 @@ F: include/linux/mm.h F: mm/ MEMORY RESOURCE CONTROLLER -P: Balbir Singh -M: balbir@linux.vnet.ibm.com -P: Pavel Emelyanov -M: xemul@openvz.org -P: KAMEZAWA Hiroyuki -M: kamezawa.hiroyu@jp.fujitsu.com +M: Balbir Singh +M: Pavel Emelyanov +M: KAMEZAWA Hiroyuki L: linux-mm@kvack.org S: Maintained F: mm/memcontrol.c MEMORY TECHNOLOGY DEVICES (MTD) -P: David Woodhouse -M: dwmw2@infradead.org +M: David Woodhouse W: http://www.linux-mtd.infradead.org/ L: linux-mtd@lists.infradead.org T: git git://git.infradead.org/mtd-2.6.git @@ -3875,8 +3342,7 @@ F: include/linux/mtd/ F: include/mtd/ MICROBLAZE ARCHITECTURE -P: Michal Simek -M: monstr@monstr.eu +M: Michal Simek L: microblaze-uclinux@itee.uq.edu.au W: http://www.monstr.eu/fdt/ T: git git://git.monstr.eu/linux-2.6-microblaze.git @@ -3884,14 +3350,12 @@ S: Supported F: arch/microblaze/ MICROTEK X6 SCANNER -P: Oliver Neukum -M: oliver@neukum.name +M: Oliver Neukum S: Maintained F: drivers/usb/image/microtek.* MIPS -P: Ralf Baechle -M: ralf@linux-mips.org +M: Ralf Baechle W: http://www.linux-mips.org/ L: linux-mips@linux-mips.org T: git git://git.linux-mips.org/pub/scm/linux.git @@ -3900,8 +3364,7 @@ F: Documentation/mips/ F: arch/mips/ MISCELLANEOUS MCA-SUPPORT -P: James Bottomley -M: James.Bottomley@HansenPartnership.com +M: James Bottomley S: Maintained F: Documentation/ia64/mca.txt F: Documentation/mca.txt @@ -3909,15 +3372,13 @@ F: drivers/mca/ F: include/linux/mca* MODULE SUPPORT -P: Rusty Russell -M: rusty@rustcorp.com.au +M: Rusty Russell S: Maintained F: include/linux/module.h F: kernel/module.c MOTION EYE VAIO PICTUREBOOK CAMERA DRIVER -P: Stelian Pop -M: stelian@popies.net +M: Stelian Pop W: http://popies.net/meye/ S: Maintained F: Documentation/video4linux/meye.txt @@ -3925,135 +3386,112 @@ F: drivers/media/video/meye.* F: include/linux/meye.h MOTOROLA IMX MMC/SD HOST CONTROLLER INTERFACE DRIVER -P: Pavel Pisa -M: ppisa@pikron.com +M: Pavel Pisa L: linux-arm-kernel@lists.arm.linux.org.uk (subscribers-only) S: Maintained F: drivers/mmc/host/imxmmc.* MOUSE AND MISC DEVICES [GENERAL] -P: Alessandro Rubini -M: rubini@ipvvis.unipv.it +M: Alessandro Rubini S: Maintained F: drivers/input/mouse/ F: include/linux/gpio_mouse.h MOXA SMARTIO/INDUSTIO/INTELLIO SERIAL CARD -P: Jiri Slaby -M: jirislaby@gmail.com +M: Jiri Slaby S: Maintained F: Documentation/serial/moxa-smartio F: drivers/char/mxser.* MSI LAPTOP SUPPORT -P: Lennart Poettering -M: mzxreary@0pointer.de +M: Lennart Poettering W: https://tango.0pointer.de/mailman/listinfo/s270-linux W: http://0pointer.de/lennart/tchibo.html S: Maintained F: drivers/platform/x86/msi-laptop.c MULTIFUNCTION DEVICES (MFD) -P: Samuel Ortiz -M: sameo@linux.intel.com +M: Samuel Ortiz T: git git://git.kernel.org/pub/scm/linux/kernel/git/sameo/mfd-2.6.git S: Supported F: drivers/mfd/ MULTIMEDIA CARD (MMC), SECURE DIGITAL (SD) AND SDIO SUBSYSTEM -P: Pierre Ossman -M: pierre@ossman.eu +M: Pierre Ossman S: Maintained F: drivers/mmc/ F: include/linux/mmc/ MULTIMEDIA CARD (MMC) ETC. OVER SPI -P: David Brownell -M: dbrownell@users.sourceforge.net +M: David Brownell S: Odd Fixes F: drivers/mmc/host/mmc_spi.c F: include/linux/spi/mmc_spi.h MULTISOUND SOUND DRIVER -P: Andrew Veliath -M: andrewtv@usa.net +M: Andrew Veliath S: Maintained F: Documentation/sound/oss/MultiSound F: sound/oss/msnd* MULTITECH MULTIPORT CARD (ISICOM) -P: Jiri Slaby -M: jirislaby@gmail.com +M: Jiri Slaby S: Maintained F: drivers/char/isicom.c F: include/linux/isicom.h MUSB MULTIPOINT HIGH SPEED DUAL-ROLE CONTROLLER -P: Felipe Balbi -M: felipe.balbi@nokia.com +M: Felipe Balbi L: linux-usb@vger.kernel.org T: git git://gitorious.org/musb/mainline.git S: Maintained F: drivers/usb/musb/ MYRICOM MYRI-10G 10GbE DRIVER (MYRI10GE) -P: Andrew Gallatin -M: gallatin@myri.com -P: Brice Goglin -M: brice@myri.com +M: Andrew Gallatin +M: Brice Goglin L: netdev@vger.kernel.org W: http://www.myri.com/scs/download-Myri10GE.html S: Supported F: drivers/net/myri10ge/ NATSEMI ETHERNET DRIVER (DP8381x) -P: Tim Hockin -M: thockin@hockin.org +M: Tim Hockin S: Maintained F: drivers/net/natsemi.c NCP FILESYSTEM -P: Petr Vandrovec -M: vandrove@vc.cvut.cz +M: Petr Vandrovec L: linware@sh.cvut.cz S: Maintained F: fs/ncpfs/ NCR DUAL 700 SCSI DRIVER (MICROCHANNEL) -P: James E.J. Bottomley -M: James.Bottomley@HansenPartnership.com +M: "James E.J. Bottomley" L: linux-scsi@vger.kernel.org S: Maintained F: drivers/scsi/NCR_D700.* NETEFFECT IWARP RNIC DRIVER (IW_NES) -P: Faisal Latif -M: faisal.latif@intel.com -P: Chien Tung -M: chien.tin.tung@intel.com +M: Faisal Latif +M: Chien Tung L: general@lists.openfabrics.org W: http://www.neteffect.com S: Supported F: drivers/infiniband/hw/nes/ NETEM NETWORK EMULATOR -P: Stephen Hemminger -M: shemminger@linux-foundation.org +M: Stephen Hemminger L: netem@lists.linux-foundation.org S: Maintained F: net/sched/sch_netem.c NETERION (S2IO) 10GbE DRIVER (xframe/vxge) -P: Ramkrishna Vepa -M: ram.vepa@neterion.com -P: Rastapur Santosh -M: santosh.rastapur@neterion.com -P: Sivakumar Subramani -M: sivakumar.subramani@neterion.com -P: Sreenivasa Honnur -M: sreenivasa.honnur@neterion.com -P: Anil Murthy -M: anil.murthy@neterion.com +M: Ramkrishna Vepa +M: Rastapur Santosh +M: Sivakumar Subramani +M: Sreenivasa Honnur +M: Anil Murthy L: netdev@vger.kernel.org W: http://trac.neterion.com/cgi-bin/trac.cgi/wiki/Linux?Anonymous W: http://trac.neterion.com/cgi-bin/trac.cgi/wiki/X3100Linux?Anonymous @@ -4067,8 +3505,7 @@ P: Marc Boucher P: James Morris P: Harald Welte P: Jozsef Kadlecsik -P: Patrick McHardy -M: kaber@trash.net +M: Patrick McHardy L: netfilter-devel@vger.kernel.org L: netfilter@vger.kernel.org L: coreteam@netfilter.org @@ -4084,8 +3521,7 @@ F: net/*/netfilter/ F: net/netfilter/ NETLABEL -P: Paul Moore -M: paul.moore@hp.com +M: Paul Moore W: http://netlabel.sf.net L: netdev@vger.kernel.org S: Supported @@ -4094,8 +3530,7 @@ F: include/net/netlabel.h F: net/netlabel/ NETROM NETWORK LAYER -P: Ralf Baechle -M: ralf@linux-mips.org +M: Ralf Baechle L: linux-hams@vger.kernel.org W: http://www.linux-ax25.org/ S: Maintained @@ -4104,16 +3539,14 @@ F: include/net/netrom.h F: net/netrom/ NETWORK BLOCK DEVICE (NBD) -P: Paul Clements -M: Paul.Clements@steeleye.com +M: Paul Clements S: Maintained F: Documentation/blockdev/nbd.txt F: drivers/block/nbd.c F: include/linux/nbd.h NETWORKING [GENERAL] -P: David S. Miller -M: davem@davemloft.net +M: "David S. Miller" L: netdev@vger.kernel.org W: http://www.linuxfoundation.org/en/Net T: git git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6.git @@ -4122,18 +3555,12 @@ F: net/ F: include/net/ NETWORKING [IPv4/IPv6] -P: David S. Miller -M: davem@davemloft.net -P: Alexey Kuznetsov -M: kuznet@ms2.inr.ac.ru -P: Pekka Savola (ipv6) -M: pekkas@netcore.fi -P: James Morris -M: jmorris@namei.org -P: Hideaki YOSHIFUJI -M: yoshfuji@linux-ipv6.org -P: Patrick McHardy -M: kaber@trash.net +M: "David S. Miller" +M: Alexey Kuznetsov +M: "Pekka Savola (ipv6)" +M: James Morris +M: Hideaki YOSHIFUJI +M: Patrick McHardy L: netdev@vger.kernel.org T: git git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6.git S: Maintained @@ -4142,14 +3569,12 @@ F: net/ipv6/ F: include/net/ip* NETWORKING [LABELED] (NetLabel, CIPSO, Labeled IPsec, SECMARK) -P: Paul Moore -M: paul.moore@hp.com +M: Paul Moore L: netdev@vger.kernel.org S: Maintained NETWORKING [WIRELESS] -P: John W. Linville -M: linville@tuxdriver.com +M: "John W. Linville" L: linux-wireless@vger.kernel.org T: git git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-2.6.git S: Maintained @@ -4165,16 +3590,14 @@ S: Odd Fixes F: drivers/net/ NETXEN (1/10) GbE SUPPORT -P: Dhananjay Phadke -M: dhananjay@netxen.com +M: Dhananjay Phadke L: netdev@vger.kernel.org W: http://www.netxen.com S: Supported F: drivers/net/netxen/ NFS, SUNRPC, AND LOCKD CLIENTS -P: Trond Myklebust -M: Trond.Myklebust@netapp.com +M: Trond Myklebust L: linux-nfs@vger.kernel.org W: http://client.linux-nfs.org T: git git://git.linux-nfs.org/pub/linux/nfs-2.6.git @@ -4188,17 +3611,14 @@ F: include/linux/nfs* F: include/linux/sunrpc/ NI5010 NETWORK DRIVER -P: Jan-Pascal van Best -M: janpascal@vanbest.org -P: Andreas Mohr -M: andi@lisas.de +M: Jan-Pascal van Best +M: Andreas Mohr L: netdev@vger.kernel.org S: Maintained F: drivers/net/ni5010.* NILFS2 FILESYSTEM -P: KONISHI Ryusuke -M: konishi.ryusuke@lab.ntt.co.jp +M: KONISHI Ryusuke L: users@nilfs.org W: http://www.nilfs.org/en/ S: Supported @@ -4207,26 +3627,22 @@ F: fs/nilfs2/ F: include/linux/nilfs2_fs.h NINJA SCSI-3 / NINJA SCSI-32Bi (16bit/CardBus) PCMCIA SCSI HOST ADAPTER DRIVER -P: YOKOTA Hiroshi -M: yokota@netlab.is.tsukuba.ac.jp +M: YOKOTA Hiroshi W: http://www.netlab.is.tsukuba.ac.jp/~yokota/izumi/ninja/ S: Maintained F: Documentation/scsi/NinjaSCSI.txt F: drivers/scsi/pcmcia/nsp_* NINJA SCSI-32Bi/UDE PCI/CARDBUS SCSI HOST ADAPTER DRIVER -P: GOTO Masanori -M: gotom@debian.or.jp -P: YOKOTA Hiroshi -M: yokota@netlab.is.tsukuba.ac.jp +M: GOTO Masanori +M: YOKOTA Hiroshi W: http://www.netlab.is.tsukuba.ac.jp/~yokota/izumi/ninja/ S: Maintained F: Documentation/scsi/NinjaSCSI.txt F: drivers/scsi/nsp32* NTFS FILESYSTEM -P: Anton Altaparmakov -M: aia21@cantab.net +M: Anton Altaparmakov L: linux-ntfs-dev@lists.sourceforge.net W: http://www.linux-ntfs.org/ T: git git://git.kernel.org/pub/scm/linux/kernel/git/aia21/ntfs-2.6.git @@ -4235,16 +3651,14 @@ F: Documentation/filesystems/ntfs.txt F: fs/ntfs/ NVIDIA (rivafb and nvidiafb) FRAMEBUFFER DRIVER -P: Antonino Daplas -M: adaplas@gmail.com +M: Antonino Daplas L: linux-fbdev-devel@lists.sourceforge.net (moderated for non-subscribers) S: Maintained F: drivers/video/riva/ F: drivers/video/nvidia/ OMAP SUPPORT -P: Tony Lindgren -M: tony@atomide.com +M: "Tony Lindgren " L: linux-omap@vger.kernel.org W: http://www.muru.com/linux/omap/ W: http://linux.omap.com/ @@ -4253,97 +3667,83 @@ S: Maintained F: arch/arm/*omap* OMAP CLOCK FRAMEWORK SUPPORT -P: Paul Walmsley -M: paul@pwsan.com +M: Paul Walmsley L: linux-omap@vger.kernel.org S: Maintained F: arch/arm/*omap*/*clock* OMAP POWER MANAGEMENT SUPPORT -P: Kevin Hilman -M: khilman@deeprootsystems.com +M: Kevin Hilman L: linux-omap@vger.kernel.org S: Maintained F: arch/arm/*omap*/*pm* OMAP AUDIO SUPPORT -P: Jarkko Nikula -M: jhnikula@gmail.com +M: Jarkko Nikula L: alsa-devel@alsa-project.org (subscribers-only) L: linux-omap@vger.kernel.org S: Maintained F: sound/soc/omap/ OMAP FRAMEBUFFER SUPPORT -P: Imre Deak -M: imre.deak@nokia.com +M: Imre Deak L: linux-fbdev-devel@lists.sourceforge.net (moderated for non-subscribers) L: linux-omap@vger.kernel.org S: Maintained F: drivers/video/omap/ OMAP MMC SUPPORT -P: Jarkko Lavinen -M: jarkko.lavinen@nokia.com +M: Jarkko Lavinen L: linux-omap@vger.kernel.org S: Maintained F: drivers/mmc/host/*omap* OMAP RANDOM NUMBER GENERATOR SUPPORT -P: Deepak Saxena -M: dsaxena@plexity.net +M: Deepak Saxena S: Maintained F: drivers/char/hw_random/omap-rng.c OMAP USB SUPPORT -P: Felipe Balbi -M: felipe.balbi@nokia.com -P: David Brownell -M: dbrownell@users.sourceforge.net +M: Felipe Balbi +M: David Brownell L: linux-usb@vger.kernel.org L: linux-omap@vger.kernel.org S: Maintained OMFS FILESYSTEM -P: Bob Copeland -M: me@bobcopeland.com +M: Bob Copeland L: linux-karma-devel@lists.sourceforge.net S: Maintained F: Documentation/filesystems/omfs.txt F: fs/omfs/ OMNIKEY CARDMAN 4000 DRIVER -P: Harald Welte -M: laforge@gnumonks.org +M: Harald Welte S: Maintained F: drivers/char/pcmcia/cm4000_cs.c F: include/linux/cm4000_cs.h OMNIKEY CARDMAN 4040 DRIVER -P: Harald Welte -M: laforge@gnumonks.org +M: Harald Welte S: Maintained F: drivers/char/pcmcia/cm4040_cs.* OMNIVISION OV7670 SENSOR DRIVER -P: Jonathan Corbet -M: corbet@lwn.net +M: Jonathan Corbet L: linux-media@vger.kernel.org T: git git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6.git S: Maintained F: drivers/media/video/ov7670.c ONENAND FLASH DRIVER -P: Kyungmin Park -M: kyungmin.park@samsung.com +M: Kyungmin Park L: linux-mtd@lists.infradead.org S: Maintained F: drivers/mtd/onenand/ F: include/linux/mtd/onenand*.h ONSTREAM SCSI TAPE DRIVER -P: Willem Riede -M: osst@riede.org +M: Willem Riede L: osst-users@lists.sourceforge.net L: linux-scsi@vger.kernel.org S: Maintained @@ -4351,16 +3751,14 @@ F: drivers/scsi/osst* F: drivers/scsi/st* OPENCORES I2C BUS DRIVER -P: Peter Korsgaard -M: jacmet@sunsite.dk +M: Peter Korsgaard L: linux-i2c@vger.kernel.org S: Maintained F: Documentation/i2c/busses/i2c-ocores F: drivers/i2c/busses/i2c-ocores.c OPROFILE -P: Robert Richter -M: robert.richter@amd.com +M: Robert Richter L: oprofile-list@lists.sf.net S: Maintained F: arch/*/oprofile/ @@ -4368,10 +3766,8 @@ F: drivers/oprofile/ F: include/linux/oprofile.h ORACLE CLUSTER FILESYSTEM 2 (OCFS2) -P: Mark Fasheh -M: mfasheh@suse.com -P: Joel Becker -M: joel.becker@oracle.com +M: Mark Fasheh +M: Joel Becker L: ocfs2-devel@oss.oracle.com (moderated for non-subscribers) W: http://oss.oracle.com/projects/ocfs2/ T: git git://git.kernel.org/pub/scm/linux/kernel/git/jlbec/ocfs2.git @@ -4381,10 +3777,8 @@ F: Documentation/filesystems/dlmfs.txt F: fs/ocfs2/ ORINOCO DRIVER -P: Pavel Roskin -M: proski@gnu.org -P: David Gibson -M: hermes@gibson.dropbear.id.au +M: Pavel Roskin +M: David Gibson L: linux-wireless@vger.kernel.org L: orinoco-users@lists.sourceforge.net L: orinoco-devel@lists.sourceforge.net @@ -4393,10 +3787,8 @@ S: Maintained F: drivers/net/wireless/orinoco/ OSD LIBRARY and FILESYSTEM -P: Boaz Harrosh -M: bharrosh@panasas.com -P: Benny Halevy -M: bhalevy@panasas.com +M: Boaz Harrosh +M: Benny Halevy L: osd-dev@open-osd.org W: http://open-osd.org T: git git://git.open-osd.org/open-osd.git @@ -4406,8 +3798,7 @@ F: drivers/include/scsi/osd_* F: fs/exofs/ P54 WIRELESS DRIVER -P: Michael Wu -M: flamingice@sourmilk.net +M: Michael Wu L: linux-wireless@vger.kernel.org W: http://prism54.org T: git git://git.kernel.org/pub/scm/linux/kernel/git/mwu/mac80211-drivers.git @@ -4415,30 +3806,25 @@ S: Maintained F: drivers/net/wireless/p54/ PA SEMI ETHERNET DRIVER -P: Olof Johansson -M: olof@lixom.net +M: Olof Johansson L: netdev@vger.kernel.org S: Maintained F: drivers/net/pasemi_mac.* PA SEMI SMBUS DRIVER -P: Olof Johansson -M: olof@lixom.net +M: Olof Johansson L: linux-i2c@vger.kernel.org S: Maintained F: drivers/i2c/busses/i2c-pasemi.c PANASONIC LAPTOP ACPI EXTRAS DRIVER -P: Harald Welte -M: laforge@gnumonks.org +M: Harald Welte S: Maintained F: drivers/platform/x86/panasonic-laptop.c PANASONIC MN10300/AM33 PORT -P: David Howells -M: dhowells@redhat.com -P: Koichi Yasutake -M: yasutake.koichi@jp.panasonic.com +M: David Howells +M: Koichi Yasutake L: linux-am33-list@redhat.com (moderated for non-subscribers) W: ftp://ftp.redhat.com/pub/redhat/gnupro/AM33/ S: Maintained @@ -4454,14 +3840,10 @@ F: drivers/char/ppdev.c F: include/linux/ppdev.h PARAVIRT_OPS INTERFACE -P: Jeremy Fitzhardinge -M: jeremy@xensource.com -P: Chris Wright -M: chrisw@sous-sol.org -P: Alok Kataria -M: akataria@vmware.com -P: Rusty Russell -M: rusty@rustcorp.com.au +M: Jeremy Fitzhardinge +M: Chris Wright +M: Alok Kataria +M: Rusty Russell L: virtualization@lists.osdl.org S: Supported F: Documentation/ia64/paravirt_ops.txt @@ -4469,8 +3851,7 @@ F: arch/*/kernel/paravirt* F: arch/*/include/asm/paravirt.h PARIDE DRIVERS FOR PARALLEL PORT IDE DEVICES -P: Tim Waugh -M: tim@cyberelk.net +M: Tim Waugh L: linux-parport@lists.infradead.org (subscribers-only) W: http://www.torque.net/linux-pp.html S: Maintained @@ -4478,10 +3859,8 @@ F: Documentation/blockdev/paride.txt F: drivers/block/paride/ PARISC ARCHITECTURE -P: Kyle McMartin -M: kyle@mcmartin.ca -P: Helge Deller -M: deller@gmx.de +M: Kyle McMartin +M: Helge Deller L: linux-parisc@vger.kernel.org W: http://www.parisc-linux.org/ T: git git://git.kernel.org/pub/scm/linux/kernel/git/kyle/parisc-2.6.git @@ -4490,37 +3869,32 @@ F: arch/parisc/ F: drivers/parisc/ PC87360 HARDWARE MONITORING DRIVER -P: Jim Cromie -M: jim.cromie@gmail.com +M: Jim Cromie L: lm-sensors@lm-sensors.org S: Maintained F: Documentation/hwmon/pc87360 F: drivers/hwmon/pc87360.c PC8736x GPIO DRIVER -P: Jim Cromie -M: jim.cromie@gmail.com +M: Jim Cromie S: Maintained F: drivers/char/pc8736x_gpio.c PCA9532 LED DRIVER -P: Riku Voipio -M: riku.voipio@iki.fi +M: Riku Voipio S: Maintained F: drivers/leds/leds-pca9532.c F: include/linux/leds-pca9532.h PCI ERROR RECOVERY -P: Linas Vepstas -M: linas@austin.ibm.com +M: Linas Vepstas L: linux-pci@vger.kernel.org S: Supported F: Documentation/PCI/pci-error-recovery.txt F: Documentation/powerpc/eeh-pci-error-recovery.txt PCI SUBSYSTEM -P: Jesse Barnes -M: jbarnes@virtuousgeek.org +M: Jesse Barnes L: linux-pci@vger.kernel.org T: git git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci-2.6.git S: Supported @@ -4529,8 +3903,7 @@ F: drivers/pci/ F: include/linux/pci* PCIE HOTPLUG DRIVER -P: Kristen Carlson Accardi -M: kristen.c.accardi@intel.com +M: Kristen Carlson Accardi L: linux-pci@vger.kernel.org S: Supported F: drivers/pci/pcie/ @@ -4546,113 +3919,94 @@ F: drivers/pcmcia/ F: include/pcmcia/ PCNET32 NETWORK DRIVER -P: Don Fry -M: pcnet32@verizon.net +M: Don Fry L: netdev@vger.kernel.org S: Maintained F: drivers/net/pcnet32.c PER-TASK DELAY ACCOUNTING -P: Balbir Singh -M: balbir@linux.vnet.ibm.com +M: Balbir Singh S: Maintained F: include/linux/delayacct.h F: kernel/delayacct.c PERFORMANCE COUNTER SUBSYSTEM -P: Peter Zijlstra -M: a.p.zijlstra@chello.nl -P: Paul Mackerras -M: paulus@samba.org -P: Ingo Molnar -M: mingo@elte.hu +M: Peter Zijlstra +M: Paul Mackerras +M: Ingo Molnar S: Supported PERSONALITY HANDLING -P: Christoph Hellwig -M: hch@infradead.org +M: Christoph Hellwig L: linux-abi-devel@lists.sourceforge.net S: Maintained F: include/linux/personality.h PHRAM MTD DRIVER -P: Joern Engel -M: joern@lazybastard.org +M: Joern Engel L: linux-mtd@lists.infradead.org S: Maintained F: drivers/mtd/devices/phram.c PKTCDVD DRIVER -P: Peter Osterlund -M: petero2@telia.com +M: Peter Osterlund S: Maintained F: drivers/block/pktcdvd.c F: include/linux/pktcdvd.h POSIX CLOCKS and TIMERS -P: Thomas Gleixner -M: tglx@linutronix.de +M: Thomas Gleixner S: Supported F: fs/timerfd.c F: include/linux/timer* F: kernel/*timer* POWER SUPPLY CLASS/SUBSYSTEM and DRIVERS -P: Anton Vorontsov -M: cbou@mail.ru -P: David Woodhouse -M: dwmw2@infradead.org +M: Anton Vorontsov +M: David Woodhouse T: git git://git.infradead.org/battery-2.6.git S: Maintained F: include/linux/power_supply.h F: drivers/power/power_supply* PNP SUPPORT -P: Adam Belay -M: abelay@mit.edu -P: Bjorn Helgaas -M: bjorn.helgaas@hp.com +M: Adam Belay +M: Bjorn Helgaas S: Maintained F: drivers/pnp/ PNXxxxx I2C DRIVER -P: Vitaly Wool -M: vitalywool@gmail.com +M: Vitaly Wool L: linux-i2c@vger.kernel.org S: Maintained F: drivers/i2c/busses/i2c-pnx.c PPP PROTOCOL DRIVERS AND COMPRESSORS -P: Paul Mackerras -M: paulus@samba.org +M: Paul Mackerras L: linux-ppp@vger.kernel.org S: Maintained F: drivers/net/ppp_* PPP OVER ATM (RFC 2364) -P: Mitchell Blank Jr -M: mitch@sfgoth.com +M: Mitchell Blank Jr S: Maintained F: net/atm/pppoatm.c F: include/linux/atmppp.h PPP OVER ETHERNET -P: Michal Ostrowski -M: mostrows@earthlink.net +M: Michal Ostrowski S: Maintained F: drivers/net/pppoe.c F: drivers/net/pppox.c PPP OVER L2TP -P: James Chapman -M: jchapman@katalix.com +M: James Chapman S: Maintained F: drivers/net/pppol2tp.c F: include/linux/if_pppol2tp.h PPS SUPPORT -P: Rodolfo Giometti -M: giometti@enneenne.com +M: Rodolfo Giometti W: http://wiki.enneenne.com/index.php/LinuxPPS_support L: linuxpps@ml.enneenne.com (subscribers-only) S: Maintained @@ -4661,8 +4015,7 @@ F: drivers/pps/ F: include/linux/pps*.h PREEMPTIBLE KERNEL -P: Robert Love -M: rml@tech9.net +M: Robert Love L: kpreempt-tech@lists.sourceforge.net W: ftp://ftp.kernel.org/pub/linux/kernel/people/rml/preempt-kernel S: Supported @@ -4670,37 +4023,32 @@ F: Documentation/preempt-locking.txt F: include/linux/preempt.h PRISM54 WIRELESS DRIVER -P: Luis R. Rodriguez -M: mcgrof@gmail.com +M: "Luis R. Rodriguez" L: linux-wireless@vger.kernel.org W: http://prism54.org S: Maintained F: drivers/net/wireless/prism54/ PROMISE DC4030 CACHING DISK CONTROLLER DRIVER -P: Peter Denison -M: promise@pnd-pc.demon.co.uk +M: Peter Denison W: http://www.pnd-pc.demon.co.uk/promise/ S: Maintained PROMISE SATA TX2/TX4 CONTROLLER LIBATA DRIVER -P: Mikael Pettersson -M: mikpe@it.uu.se +M: Mikael Pettersson L: linux-ide@vger.kernel.org S: Maintained F: drivers/ata/sata_promise.* PS3 NETWORK SUPPORT -P: Geoff Levand -M: geoffrey.levand@am.sony.com +M: Geoff Levand L: netdev@vger.kernel.org L: cbe-oss-dev@ozlabs.org S: Supported F: drivers/net/ps3_gelic_net.* PS3 PLATFORM SUPPORT -P: Geoff Levand -M: geoffrey.levand@am.sony.com +M: Geoff Levand L: linuxppc-dev@ozlabs.org L: cbe-oss-dev@ozlabs.org S: Supported @@ -4715,16 +4063,13 @@ F: drivers/usb/host/*ps3.c F: sound/ppc/snd_ps3* PS3VRAM DRIVER -P: Jim Paris -M: jim@jtan.com +M: Jim Paris L: cbe-oss-dev@ozlabs.org S: Maintained PTRACE SUPPORT -P: Roland McGrath -M: roland@redhat.com -P: Oleg Nesterov -M: oleg@redhat.com +M: Roland McGrath +M: Oleg Nesterov S: Maintained F: include/asm-generic/syscall.h F: include/linux/ptrace.h @@ -4733,8 +4078,7 @@ F: include/linux/tracehook.h F: kernel/ptrace.c PVRUSB2 VIDEO4LINUX DRIVER -P: Mike Isely -M: isely@pobox.com +M: Mike Isely L: pvrusb2@isely.net (subscribers-only) L: linux-media@vger.kernel.org W: http://www.isely.net/pvrusb2/ @@ -4744,10 +4088,8 @@ F: Documentation/video4linux/README.pvrusb2 F: drivers/media/video/pvrusb2/ PXA2xx/PXA3xx SUPPORT -P: Eric Miao -M: eric.y.miao@gmail.com -P: Russell King -M: linux@arm.linux.org.uk +M: Eric Miao +M: Russell King L: linux-arm-kernel@lists.arm.linux.org.uk (subscribers-only) S: Maintained F: arch/arm/mach-pxa/ @@ -4759,17 +4101,14 @@ F: sound/arm/pxa* F: sound/soc/pxa PXA168 SUPPORT -P: Eric Miao -M: eric.y.miao@gmail.com -P: Jason Chagas -M: jason.chagas@marvell.com +M: Eric Miao +M: Jason Chagas L: linux-arm-kernel@lists.arm.linux.org.uk (subscribers-only) T: git git://git.kernel.org/pub/scm/linux/kernel/git/ycmiao/pxa-linux-2.6.git S: Maintained PXA910 SUPPORT -P: Eric Miao -M: eric.y.miao@gmail.com +M: Eric Miao L: linux-arm-kernel@lists.arm.linux.org.uk (subscribers-only) T: git git://git.kernel.org/pub/scm/linux/kernel/git/ycmiao/pxa-linux-2.6.git S: Maintained @@ -4778,14 +4117,12 @@ PXA MMCI DRIVER S: Orphan PXA RTC DRIVER -P: Robert Jarzmik -M: robert.jarzmik@free.fr +M: Robert Jarzmik L: rtc-linux@googlegroups.com S: Maintained QLOGIC QLA2XXX FC-SCSI DRIVER -P: Andrew Vasquez -M: andrew.vasquez@qlogic.com +M: Andrew Vasquez M: linux-driver@qlogic.com L: linux-scsi@vger.kernel.org S: Supported @@ -4793,8 +4130,7 @@ F: Documentation/scsi/LICENSE.qla2xxx F: drivers/scsi/qla2xxx/ QLOGIC QLA3XXX NETWORK DRIVER -P: Ron Mercer -M: ron.mercer@qlogic.com +M: Ron Mercer M: linux-driver@qlogic.com L: netdev@vger.kernel.org S: Supported @@ -4802,16 +4138,14 @@ F: Documentation/networking/LICENSE.qla3xxx F: drivers/net/qla3xxx.* QLOGIC QLGE 10Gb ETHERNET DRIVER -P: Ron Mercer -M: ron.mercer@qlogic.com +M: Ron Mercer M: linux-driver@qlogic.com L: netdev@vger.kernel.org S: Supported F: drivers/net/qlge/ QNX4 FILESYSTEM -P: Anders Larsen -M: al@alarsen.net +M: Anders Larsen W: http://www.alarsen.net/linux/qnx4fs/ S: Maintained F: fs/qnx4/ @@ -4819,16 +4153,14 @@ F: include/linux/qnx4_fs.h F: include/linux/qnxtypes.h RADEON FRAMEBUFFER DISPLAY DRIVER -P: Benjamin Herrenschmidt -M: benh@kernel.crashing.org +M: Benjamin Herrenschmidt L: linux-fbdev-devel@lists.sourceforge.net (moderated for non-subscribers) S: Maintained F: drivers/video/aty/radeon* F: include/linux/radeonfb.h RAGE128 FRAMEBUFFER DISPLAY DRIVER -P: Paul Mackerras -M: paulus@samba.org +M: Paul Mackerras L: linux-fbdev-devel@lists.sourceforge.net (moderated for non-subscribers) S: Maintained F: drivers/video/aty/aty128fb.c @@ -4843,64 +4175,53 @@ T: git git://git.kernel.org/pub/scm/linux/kernel/git/ivd/rt2x00.git F: drivers/net/wireless/rt2x00/ RAMDISK RAM BLOCK DEVICE DRIVER -P: Nick Piggin -M: npiggin@suse.de +M: Nick Piggin S: Maintained F: Documentation/blockdev/ramdisk.txt F: drivers/block/brd.c RANDOM NUMBER DRIVER -P: Matt Mackall -M: mpm@selenic.com +M: Matt Mackall S: Maintained F: drivers/char/random.c RAPIDIO SUBSYSTEM -P: Matt Porter -M: mporter@kernel.crashing.org +M: Matt Porter S: Maintained F: drivers/rapidio/ RAYLINK/WEBGEAR 802.11 WIRELESS LAN DRIVER -P: Corey Thomas -M: coreythomas@charter.net +M: Corey Thomas L: linux-wireless@vger.kernel.org S: Maintained F: drivers/net/wireless/ray* RCUTORTURE MODULE -P: Josh Triplett -M: josh@freedesktop.org -P: Paul E. McKenney -M: paulmck@linux.vnet.ibm.com +M: Josh Triplett +M: "Paul E. McKenney" S: Maintained F: Documentation/RCU/torture.txt F: kernel/rcutorture.c RDC R-321X SoC -P: Florian Fainelli -M: florian@openwrt.org +M: Florian Fainelli S: Maintained RDC R6040 FAST ETHERNET DRIVER -P: Florian Fainelli -M: florian@openwrt.org +M: Florian Fainelli L: netdev@vger.kernel.org S: Maintained F: drivers/net/r6040.c RDS - RELIABLE DATAGRAM SOCKETS -P: Andy Grover -M: andy.grover@oracle.com +M: Andy Grover L: rds-devel@oss.oracle.com (moderated for non-subscribers) S: Supported F: net/rds/ READ-COPY UPDATE (RCU) -P: Dipankar Sarma -M: dipankar@in.ibm.com -P: Paul E. McKenney -M: paulmck@linux.vnet.ibm.com +M: Dipankar Sarma +M: "Paul E. McKenney" W: http://www.rdrop.com/users/paulmck/rclock/ S: Supported F: Documentation/RCU/rcu.txt @@ -4910,16 +4231,14 @@ F: include/linux/srcu.h F: kernel/rcupdate.c REAL TIME CLOCK DRIVER -P: Paul Gortmaker -M: p_gortmaker@yahoo.com +M: Paul Gortmaker S: Maintained F: Documentation/rtc.txt F: drivers/rtc/ F: include/linux/rtc.h REAL TIME CLOCK (RTC) SUBSYSTEM -P: Alessandro Zummo -M: a.zummo@towertech.it +M: Alessandro Zummo L: rtc-linux@googlegroups.com S: Maintained F: Documentation/rtc.txt @@ -4932,8 +4251,7 @@ S: Supported F: fs/reiserfs/ RFKILL -P: Johannes Berg -M: johannes@sipsolutions.net +M: Johannes Berg L: linux-wireless@vger.kernel.org S: Maintained F Documentation/rfkill.txt @@ -4952,8 +4270,7 @@ F: Documentation/serial/rocket.txt F: drivers/char/rocket* ROSE NETWORK LAYER -P: Ralf Baechle -M: ralf@linux-mips.org +M: Ralf Baechle L: linux-hams@vger.kernel.org W: http://www.linux-ax25.org/ S: Maintained @@ -4962,8 +4279,7 @@ F: include/net/rose.h F: net/rose/ RTL8180 WIRELESS DRIVER -P: John W. Linville -M: linville@tuxdriver.com +M: "John W. Linville" L: linux-wireless@vger.kernel.org W: http://linuxwireless.org/ T: git git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-testing.git @@ -4971,12 +4287,9 @@ S: Maintained F: drivers/net/wireless/rtl818* RTL8187 WIRELESS DRIVER -P: Herton Ronaldo Krzesinski -M: herton@mandriva.com.br -P: Hin-Tak Leung -M: htl10@users.sourceforge.net -P: Larry Finger -M: Larry.Finger@lwfinger.net +M: Herton Ronaldo Krzesinski +M: Hin-Tak Leung +M: Larry Finger L: linux-wireless@vger.kernel.org W: http://linuxwireless.org/ T: git git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-testing.git @@ -4984,17 +4297,14 @@ S: Maintained F: drivers/net/wireless/rtl818x/rtl8187* S3 SAVAGE FRAMEBUFFER DRIVER -P: Antonino Daplas -M: adaplas@gmail.com +M: Antonino Daplas L: linux-fbdev-devel@lists.sourceforge.net (moderated for non-subscribers) S: Maintained F: drivers/video/savage/ S390 -P: Martin Schwidefsky -M: schwidefsky@de.ibm.com -P: Heiko Carstens -M: heiko.carstens@de.ibm.com +M: Martin Schwidefsky +M: Heiko Carstens M: linux390@de.ibm.com L: linux-s390@vger.kernel.org W: http://www.ibm.com/developerworks/linux/linux390/ @@ -5002,10 +4312,8 @@ S: Supported F: arch/s390/ S390 NETWORK DRIVERS -P: Ursula Braun -M: ursula.braun@de.ibm.com -P: Frank Blaschka -M: blaschka@linux.vnet.ibm.com +M: Ursula Braun +M: Frank Blaschka M: linux390@de.ibm.com L: linux-s390@vger.kernel.org W: http://www.ibm.com/developerworks/linux/linux390/ @@ -5013,20 +4321,16 @@ S: Supported F: drivers/s390/net/ S390 ZCRYPT DRIVER -P: Felix Beck -M: felix.beck@de.ibm.com -P: Ralph Wuerthner -M: ralph.wuerthner@de.ibm.com +M: Felix Beck +M: Ralph Wuerthner M: linux390@de.ibm.com L: linux-s390@vger.kernel.org S: Supported F: drivers/s390/crypto/ S390 ZFCP DRIVER -P: Christof Schmitt -M: christof.schmitt@de.ibm.com -P: Martin Peschke -M: mp3@de.ibm.com +M: Christof Schmitt +M: Martin Peschke M: linux390@de.ibm.com L: linux-s390@vger.kernel.org W: http://www.ibm.com/developerworks/linux/linux390/ @@ -5035,8 +4339,7 @@ F: Documentation/s390/zfcpdump.txt F: drivers/s390/scsi/zfcp_* S390 IUCV NETWORK LAYER -P: Ursula Braun -M: ursula.braun@de.ibm.com +M: Ursula Braun M: linux390@de.ibm.com L: linux-s390@vger.kernel.org W: http://www.ibm.com/developerworks/linux/linux390/ @@ -5046,15 +4349,13 @@ F: include/net/iucv/ F: net/iucv/ S3C24XX SD/MMC Driver -P: Ben Dooks -M: ben-linux@fluff.org +M: Ben Dooks L: linux-arm-kernel@lists.arm.linux.org.uk (subscribers-only) S: Supported F: drivers/mmc/host/s3cmci.* SAA7146 VIDEO4LINUX-2 DRIVER -P: Michael Hunold -M: michael@mihu.de +M: Michael Hunold L: linux-media@vger.kernel.org T: git git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6.git W: http://www.mihu.de/linux/saa7146 @@ -5064,31 +4365,26 @@ F: drivers/media/video/*7146* F: include/media/*7146* SC1200 WDT DRIVER -P: Zwane Mwaikambo -M: zwane@arm.linux.org.uk +M: Zwane Mwaikambo S: Maintained F: drivers/watchdog/sc1200wdt.c SCHEDULER -P: Ingo Molnar -M: mingo@elte.hu -P: Peter Zijlstra -M: peterz@infradead.org +M: Ingo Molnar +M: Peter Zijlstra S: Maintained F: kernel/sched* F: include/linux/sched.h SCSI CDROM DRIVER -P: Jens Axboe -M: axboe@kernel.dk +M: Jens Axboe L: linux-scsi@vger.kernel.org W: http://www.kernel.dk S: Maintained F: drivers/scsi/sr* SCSI SG DRIVER -P: Doug Gilbert -M: dgilbert@interlog.com +M: Doug Gilbert L: linux-scsi@vger.kernel.org W: http://www.torque.net/sg S: Maintained @@ -5096,8 +4392,7 @@ F: drivers/scsi/sg.c F: include/scsi/sg.h SCSI SUBSYSTEM -P: James E.J. Bottomley -M: James.Bottomley@HansenPartnership.com +M: "James E.J. Bottomley" L: linux-scsi@vger.kernel.org T: git git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6.git T: git git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-rc-fixes-2.6.git @@ -5107,18 +4402,15 @@ F: drivers/scsi/ F: include/scsi/ SCSI TAPE DRIVER -P: Kai Mäkisara -M: Kai.Makisara@kolumbus.fi +M: Kai Mäkisara L: linux-scsi@vger.kernel.org S: Maintained F: Documentation/scsi/st.txt F: drivers/scsi/st* SCTP PROTOCOL -P: Vlad Yasevich -M: vladislav.yasevich@hp.com -P: Sridhar Samudrala -M: sri@us.ibm.com +M: Vlad Yasevich +M: Sridhar Samudrala L: linux-sctp@vger.kernel.org W: http://lksctp.sourceforge.net S: Supported @@ -5128,8 +4420,7 @@ F: include/net/sctp/ F: net/sctp/ SCx200 CPU SUPPORT -P: Jim Cromie -M: jim.cromie@gmail.com +M: Jim Cromie S: Odd Fixes F: Documentation/i2c/busses/scx200_acb F: arch/x86/kernel/scx200_32.c @@ -5139,49 +4430,42 @@ F: drivers/mtd/maps/scx200_docflash.c F: include/linux/scx200.h SCx200 GPIO DRIVER -P: Jim Cromie -M: jim.cromie@gmail.com +M: Jim Cromie S: Maintained F: drivers/char/scx200_gpio.c F: include/linux/scx200_gpio.h SCx200 HRT CLOCKSOURCE DRIVER -P: Jim Cromie -M: jim.cromie@gmail.com +M: Jim Cromie S: Maintained F: drivers/clocksource/scx200_hrt.c SDRICOH_CS MMC/SD HOST CONTROLLER INTERFACE DRIVER -P: Sascha Sommer -M: saschasommer@freenet.de +M: Sascha Sommer L: sdricohcs-devel@lists.sourceforge.net (subscribers-only) S: Maintained F: drivers/mmc/host/sdricoh_cs.c SECURE DIGITAL HOST CONTROLLER INTERFACE (SDHCI) DRIVER -P: Pierre Ossman -M: pierre@ossman.eu +M: Pierre Ossman L: sdhci-devel@lists.ossman.eu S: Maintained SECURE DIGITAL HOST CONTROLLER INTERFACE, OPEN FIRMWARE BINDINGS (SDHCI-OF) -P: Anton Vorontsov -M: avorontsov@ru.mvista.com +M: Anton Vorontsov L: linuxppc-dev@ozlabs.org L: sdhci-devel@lists.ossman.eu S: Maintained F: drivers/mmc/host/sdhci.* SECURE DIGITAL HOST CONTROLLER INTERFACE (SDHCI) SAMSUNG DRIVER -P: Ben Dooks -M: ben-linux@fluff.org +M: Ben Dooks L: sdhci-devel@lists.ossman.eu S: Maintained F: drivers/mmc/host/sdhci-s3c.c SECURITY SUBSYSTEM -P: James Morris -M: jmorris@namei.org +M: James Morris L: linux-security-module@vger.kernel.org (suggested Cc:) T: git git://www.kernel.org/pub/scm/linux/kernel/git/jmorris/security-testing-2.6.git W: http://security.wiki.kernel.org/ @@ -5189,17 +4473,13 @@ S: Supported F: security/ SECURITY CONTACT -P: Security Officers -M: security@kernel.org +M: Security Officers S: Supported SELINUX SECURITY MODULE -P: Stephen Smalley -M: sds@tycho.nsa.gov -P: James Morris -M: jmorris@namei.org -P: Eric Paris -M: eparis@parisplace.org +M: Stephen Smalley +M: James Morris +M: Eric Paris L: selinux@tycho.nsa.gov (subscribers-only, general discussion) W: http://selinuxproject.org T: git git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/security-testing-2.6.git @@ -5208,15 +4488,13 @@ F: include/linux/selinux* F: security/selinux/ SENSABLE PHANTOM -P: Jiri Slaby -M: jirislaby@gmail.com +M: Jiri Slaby S: Maintained F: drivers/misc/phantom.c F: include/linux/phantom.h SERIAL ATA (SATA) SUBSYSTEM -P: Jeff Garzik -M: jgarzik@pobox.com +M: Jeff Garzik L: linux-ide@vger.kernel.org T: git git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/libata-dev.git S: Supported @@ -5225,10 +4503,8 @@ F: include/linux/ata.h F: include/linux/libata.h SERVER ENGINES 10Gbps NIC - BladeEngine 2 DRIVER -P: Sathya Perla -M: sathyap@serverengines.com -P: Subbu Seetharaman -M: subbus@serverengines.com +M: Sathya Perla +M: Subbu Seetharaman L: netdev@vger.kernel.org W: http://www.serverengines.com S: Supported @@ -5237,20 +4513,17 @@ F: drivers/net/benet/ SFC NETWORK DRIVER P: Steve Hodgson P: Ben Hutchings -P: Robert Stonehouse -M: linux-net-drivers@solarflare.com +M: Robert Stonehouse S: Supported F: drivers/net/sfc/ SGI GRU DRIVER -P: Jack Steiner -M: steiner@sgi.com +M: Jack Steiner S: Maintained F: drivers/misc/sgi-gru/ SGI SN-IA64 (Altix) SERIAL CONSOLE DRIVER -P: Pat Gefre -M: pfg@sgi.com +M: Pat Gefre L: linux-ia64@vger.kernel.org S: Supported F: Documentation/ia64/serial.txt @@ -5258,22 +4531,19 @@ F: drivers/serial/ioc?_serial.c F: include/linux/ioc?.h SGI VISUAL WORKSTATION 320 AND 540 -P: Andrey Panin -M: pazke@donpac.ru +M: Andrey Panin L: linux-visws-devel@lists.sf.net W: http://linux-visws.sf.net S: Maintained for 2.6. F: Documentation/sgi-visws.txt SGI XP/XPC/XPNET DRIVER -P: Robin Holt -M: holt@sgi.com +M: Robin Holt S: Maintained F: drivers/misc/sgi-xp/ SHARP LH SUPPORT (LH7952X & LH7A40X) -P: Marc Singer -M: elf@buici.com +M: Marc Singer W: http://projects.buici.com/arm L: linux-arm-kernel@lists.arm.linux.org.uk (subscribers-only) S: Maintained @@ -5284,23 +4554,20 @@ F: drivers/usb/gadget/lh7a40* F: drivers/usb/host/ohci-lh7a40* SHPC HOTPLUG DRIVER -P: Kristen Carlson Accardi -M: kristen.c.accardi@intel.com +M: Kristen Carlson Accardi L: linux-pci@vger.kernel.org S: Supported F: drivers/pci/hotplug/shpchp* SIMTEC EB110ATX (Chalice CATS) P: Ben Dooks -P: Vincent Sanders -M: support@simtec.co.uk +M: Vincent Sanders W: http://www.simtec.co.uk/products/EB110ATX/ S: Supported SIMTEC EB2410ITX (BAST) P: Ben Dooks -P: Vincent Sanders -M: support@simtec.co.uk +M: Vincent Sanders W: http://www.simtec.co.uk/products/EB2410ITX/ S: Supported F: arch/arm/mach-s3c2410/ @@ -5308,31 +4575,27 @@ F: drivers/*/*s3c2410* F: drivers/*/*/*s3c2410* SIS 190 ETHERNET DRIVER -P: Francois Romieu -M: romieu@fr.zoreil.com +M: Francois Romieu L: netdev@vger.kernel.org S: Maintained F: drivers/net/sis190.c SIS 900/7016 FAST ETHERNET DRIVER -P: Daniele Venzano -M: venza@brownhat.org +M: Daniele Venzano W: http://www.brownhat.org/sis900.html L: netdev@vger.kernel.org S: Maintained F: drivers/net/sis900.* SIS 96X I2C/SMBUS DRIVER -P: Mark M. Hoffman -M: mhoffman@lightlink.com +M: "Mark M. Hoffman" L: linux-i2c@vger.kernel.org S: Maintained F: Documentation/i2c/busses/i2c-sis96x F: drivers/i2c/busses/i2c-sis96x.c SIS FRAMEBUFFER DRIVER -P: Thomas Winischhofer -M: thomas@winischhofer.net +M: Thomas Winischhofer W: http://www.winischhofer.net/linuxsisvga.shtml S: Maintained F: Documentation/fb/sisfb.txt @@ -5340,70 +4603,59 @@ F: drivers/video/sis/ F: include/video/sisfb.h SIS USB2VGA DRIVER -P: Thomas Winischhofer -M: thomas@winischhofer.net +M: Thomas Winischhofer W: http://www.winischhofer.at/linuxsisusbvga.shtml S: Maintained F: drivers/usb/misc/sisusbvga/ SKGE, SKY2 10/100/1000 GIGABIT ETHERNET DRIVERS -P: Stephen Hemminger -M: shemminger@linux-foundation.org +M: Stephen Hemminger L: netdev@vger.kernel.org S: Maintained F: drivers/net/skge.* F: drivers/net/sky2.* SLAB ALLOCATOR -P: Christoph Lameter -M: cl@linux-foundation.org -P: Pekka Enberg -M: penberg@cs.helsinki.fi -P: Matt Mackall -M: mpm@selenic.com +M: Christoph Lameter +M: Pekka Enberg +M: Matt Mackall L: linux-mm@kvack.org S: Maintained F: include/linux/sl?b*.h F: mm/sl?b.c SMC91x ETHERNET DRIVER -P: Nicolas Pitre -M: nico@cam.org +M: Nicolas Pitre S: Maintained F: drivers/net/smc91x.* SMSC47B397 HARDWARE MONITOR DRIVER -P: Mark M. Hoffman -M: mhoffman@lightlink.com +M: "Mark M. Hoffman" L: lm-sensors@lm-sensors.org S: Maintained F: Documentation/hwmon/smsc47b397 F: drivers/hwmon/smsc47b397.c SMSC911x ETHERNET DRIVER -P: Steve Glendinning -M: steve.glendinning@smsc.com +M: Steve Glendinning L: netdev@vger.kernel.org S: Supported F: include/linux/smsc911x.h F: drivers/net/smsc911x.* SMSC9420 PCI ETHERNET DRIVER -P: Steve Glendinning -M: steve.glendinning@smsc.com +M: Steve Glendinning L: netdev@vger.kernel.org S: Supported F: drivers/net/smsc9420.* SMX UIO Interface -P: Ben Nizette -M: bn@niasdigital.com +M: Ben Nizette S: Maintained F: drivers/uio/uio_smx.c SN-IA64 (Itanium) SUB-PLATFORM -P: Jes Sorensen -M: jes@sgi.com +M: Jes Sorensen L: linux-altix@sgi.com L: linux-ia64@vger.kernel.org W: http://www.sgi.com/altix @@ -5411,8 +4663,7 @@ S: Maintained F: arch/ia64/sn/ SOC-CAMERA V4L2 SUBSYSTEM -P: Guennadi Liakhovetski -M: g.liakhovetski@gmx.de +M: Guennadi Liakhovetski L: linux-media@vger.kernel.org T: git git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6.git S: Maintained @@ -5420,37 +4671,32 @@ F: include/media/v4l2* F: drivers/media/video/v4l2* SOEKRIS NET48XX LED SUPPORT -P: Chris Boot -M: bootc@bootc.net +M: Chris Boot S: Maintained F: drivers/leds/leds-net48xx.c SOFTWARE RAID (Multiple Disks) SUPPORT -P: Neil Brown -M: neilb@suse.de +M: Neil Brown L: linux-raid@vger.kernel.org S: Supported F: drivers/md/ F: include/linux/raid/ SONIC NETWORK DRIVER -P: Thomas Bogendoerfer -M: tsbogend@alpha.franken.de +M: Thomas Bogendoerfer L: netdev@vger.kernel.org S: Maintained F: drivers/net/sonic.* SONICS SILICON BACKPLANE DRIVER (SSB) -P: Michael Buesch -M: mb@bu3sch.de +M: Michael Buesch L: netdev@vger.kernel.org S: Maintained F: drivers/ssb/ F: include/linux/ssb/ SONY VAIO CONTROL DEVICE DRIVER -P: Mattia Dongili -M: malattia@linux.it +M: Mattia Dongili L: linux-acpi@vger.kernel.org W: http://www.linux.it/~malattia/wiki/index.php/Sony_drivers S: Maintained @@ -5460,17 +4706,14 @@ F: drivers/platform/x86/sony-laptop.c F: include/linux/sony-laptop.h SONY MEMORYSTICK CARD SUPPORT -P: Alex Dubov -M: oakad@yahoo.com +M: Alex Dubov W: http://tifmxx.berlios.de/ S: Maintained F: drivers/memstick/host/tifm_ms.c SOUND -P: Jaroslav Kysela -M: perex@perex.cz -P: Takashi Iwai -M: tiwai@suse.de +M: Jaroslav Kysela +M: Takashi Iwai L: alsa-devel@alsa-project.org (moderated for non-subscribers) W: http://www.alsa-project.org/ T: git git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6.git @@ -5481,10 +4724,8 @@ F: include/sound/ F: sound/ SOUND - SOC LAYER / DYNAMIC AUDIO POWER MANAGEMENT (ASoC) -P: Liam Girdwood -M: lrg@slimlogic.co.uk -P: Mark Brown -M: broonie@opensource.wolfsonmicro.com +M: Liam Girdwood +M: Mark Brown T: git git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound-2.6.git L: alsa-devel@alsa-project.org (moderated for non-subscribers) W: http://alsa-project.org/main/index.php/ASoC @@ -5493,8 +4734,7 @@ F: sound/soc/ F: include/sound/soc* SPARC + UltraSPARC (sparc/sparc64) -P: David S. Miller -M: davem@davemloft.net +M: "David S. Miller" L: sparclinux@vger.kernel.org T: git git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc-2.6.git T: git git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc-next-2.6.git @@ -5502,15 +4742,13 @@ S: Maintained F: arch/sparc/ SPECIALIX IO8+ MULTIPORT SERIAL CARD DRIVER -P: Roger Wolff -M: R.E.Wolff@BitWizard.nl +M: Roger Wolff S: Supported F: Documentation/serial/specialix.txt F: drivers/char/specialix* SPI SUBSYSTEM -P: David Brownell -M: dbrownell@users.sourceforge.net +M: David Brownell L: spi-devel-general@lists.sourceforge.net S: Maintained F: Documentation/spi/ @@ -5518,18 +4756,15 @@ F: drivers/spi/ F: include/linux/spi/ SPIDERNET NETWORK DRIVER for CELL -P: Ishizaki Kou -M: kou.ishizaki@toshiba.co.jp -P: Jens Osterkamp -M: jens@de.ibm.com +M: Ishizaki Kou +M: Jens Osterkamp L: netdev@vger.kernel.org S: Supported F: Documentation/networking/spider_net.txt F: drivers/net/spider_net* SPU FILE SYSTEM -P: Jeremy Kerr -M: jk@ozlabs.org +M: Jeremy Kerr L: linuxppc-dev@ozlabs.org L: cbe-oss-dev@ozlabs.org W: http://www.ibm.com/developerworks/power/cell/ @@ -5538,8 +4773,7 @@ F: Documentation/filesystems/spufs.txt F: arch/powerpc/platforms/cell/spufs/ SQUASHFS FILE SYSTEM -P: Phillip Lougher -M: phillip@lougher.demon.co.uk +M: Phillip Lougher L: squashfs-devel@lists.sourceforge.net (subscribers-only) W: http://squashfs.org.uk S: Maintained @@ -5547,30 +4781,25 @@ F: Documentation/filesystems/squashfs.txt F: fs/squashfs/ SRM (Alpha) environment access -P: Jan-Benedict Glaw -M: jbglaw@lug-owl.de +M: Jan-Benedict Glaw S: Maintained F: arch/alpha/kernel/srm_env.c STABLE BRANCH -P: Greg Kroah-Hartman -M: greg@kroah.com -P: Chris Wright -M: chrisw@sous-sol.org +M: Greg Kroah-Hartman +M: Chris Wright L: stable@kernel.org S: Maintained STAGING SUBSYSTEM -P: Greg Kroah-Hartman -M: gregkh@suse.de +M: Greg Kroah-Hartman T: quilt kernel.org/pub/linux/kernel/people/gregkh/gregkh-2.6/ L: devel@driverdev.osuosl.org S: Maintained F: drivers/staging/ STARFIRE/DURALAN NETWORK DRIVER -P: Ion Badulescu -M: ionut@badula.org +M: Ion Badulescu S: Odd Fixes F: drivers/net/starfire* @@ -5580,15 +4809,13 @@ F: drivers/net/wireless/strip.c F: include/linux/if_strip.h STRADIS MPEG-2 DECODER DRIVER -P: Nathan Laredo -M: laredo@gnu.org +M: Nathan Laredo W: http://www.stradis.com/ S: Maintained F: drivers/media/video/stradis.c SUN3/3X -P: Sam Creasey -M: sammy@sammy.net +M: Sam Creasey W: http://sammy.net/sun3/ S: Maintained F: arch/m68k/kernel/*sun3* @@ -5596,8 +4823,7 @@ F: arch/m68k/sun3*/ F: arch/m68k/include/asm/sun3* SUPERH -P: Paul Mundt -M: lethal@linux-sh.org +M: Paul Mundt L: linux-sh@vger.kernel.org W: http://www.linux-sh.org T: git git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6.git @@ -5607,12 +4833,9 @@ F: arch/sh/ F: drivers/sh/ SUSPEND TO RAM -P: Len Brown -M: len.brown@intel.com -P: Pavel Machek -M: pavel@ucw.cz -P: Rafael J. Wysocki -M: rjw@sisk.pl +M: Len Brown +M: Pavel Machek +M: "Rafael J. Wysocki" L: linux-pm@lists.linux-foundation.org S: Supported F: Documentation/power/ @@ -5624,32 +4847,28 @@ F: include/linux/freezer.h F: include/linux/pm.h SVGA HANDLING -P: Martin Mares -M: mj@ucw.cz +M: Martin Mares L: linux-video@atrey.karlin.mff.cuni.cz S: Maintained F: Documentation/svga.txt F: arch/x86/boot/video* SYSV FILESYSTEM -P: Christoph Hellwig -M: hch@infradead.org +M: Christoph Hellwig S: Maintained F: Documentation/filesystems/sysv-fs.txt F: fs/sysv/ F: include/linux/sysv_fs.h TASKSTATS STATISTICS INTERFACE -P: Balbir Singh -M: balbir@linux.vnet.ibm.com +M: Balbir Singh S: Maintained F: Documentation/accounting/taskstats* F: include/linux/taskstats* F: kernel/taskstats.c TC CLASSIFIER -P: Jamal Hadi Salim -M: hadi@cyberus.ca +M: Jamal Hadi Salim L: netdev@vger.kernel.org S: Maintained F: include/linux/pkt_cls.h @@ -5657,38 +4876,31 @@ F: include/net/pkt_cls.h F: net/sched/ TCP LOW PRIORITY MODULE -P: Wong Hoi Sing, Edison -M: hswong3i@gmail.com -P: Hung Hing Lun, Mike -M: hlhung3i@gmail.com +M: "Wong Hoi Sing, Edison" +M: "Hung Hing Lun, Mike" W: http://tcp-lp-mod.sourceforge.net/ S: Maintained F: net/ipv4/tcp_lp.c TEHUTI ETHERNET DRIVER -P: Alexander Indenbaum -M: baum@tehutinetworks.net -P: Andy Gospodarek -M: andy@greyhouse.net +M: Alexander Indenbaum +M: Andy Gospodarek L: netdev@vger.kernel.org S: Supported F: drivers/net/tehuti* Telecom Clock Driver for MCPL0010 -P: Mark Gross -M: mark.gross@intel.com +M: Mark Gross S: Supported F: drivers/char/tlclk.c TENSILICA XTENSA PORT (xtensa) -P: Chris Zankel -M: chris@zankel.net +M: Chris Zankel S: Maintained F: arch/xtensa/ THINKPAD ACPI EXTRAS DRIVER -P: Henrique de Moraes Holschuh -M: ibm-acpi@hmh.eng.br +M: Henrique de Moraes Holschuh L: ibm-acpi-devel@lists.sourceforge.net W: http://ibm-acpi.sourceforge.net W: http://thinkwiki.org/wiki/Ibm-acpi @@ -5697,27 +4909,22 @@ S: Maintained F: drivers/platform/x86/thinkpad_acpi.c TI FLASH MEDIA INTERFACE DRIVER -P: Alex Dubov -M: oakad@yahoo.com +M: Alex Dubov S: Maintained F: drivers/misc/tifm* F: drivers/mmc/host/tifm_sd.c F: include/linux/tifm.h TI TWL4030 SERIES SOC CODEC DRIVER -P: Peter Ujfalusi -M: peter.ujfalusi@nokia.com +M: Peter Ujfalusi L: alsa-devel@alsa-project.org (moderated for non-subscribers) S: Maintained F: sound/soc/codecs/twl4030* TIPC NETWORK LAYER -P: Per Liden -M: per.liden@ericsson.com -P: Jon Maloy -M: jon.maloy@ericsson.com -P: Allan Stephens -M: allan.stephens@windriver.com +M: Per Liden +M: Jon Maloy +M: Allan Stephens L: tipc-discussion@lists.sourceforge.net W: http://tipc.sourceforge.net/ W: http://tipc.cslab.ericsson.net/ @@ -5728,8 +4935,7 @@ F: include/net/tipc/ F: net/tipc/ TLAN NETWORK DRIVER -P: Samuel Chessman -M: chessman@tux.org +M: Samuel Chessman L: tlan-devel@lists.sourceforge.net (subscribers-only) W: http://sourceforge.net/projects/tlan/ S: Maintained @@ -5737,10 +4943,8 @@ F: Documentation/networking/tlan.txt F: drivers/net/tlan.* TOMOYO SECURITY MODULE -P: Kentaro Takeda -M: takedakn@nttdata.co.jp -P: Tetsuo Handa -M: penguin-kernel@I-love.SAKURA.ne.jp +M: Kentaro Takeda +M: Tetsuo Handa L: tomoyo-users-en@lists.sourceforge.jp (subscribers-only, for developers and users in English) L: tomoyo-dev@lists.sourceforge.jp (subscribers-only, for developers in Japanese) L: tomoyo-users@lists.sourceforge.jp (subscribers-only, for users in Japanese) @@ -5754,8 +4958,7 @@ S: Orphan F: drivers/platform/x86/toshiba_acpi.c TOSHIBA SMM DRIVER -P: Jonathan Buzzard -M: jonathan@buzzard.org.uk +M: Jonathan Buzzard L: tlinux-users@tce.toshiba-dme.co.jp W: http://www.buzzard.org.uk/toshiba/ S: Maintained @@ -5763,41 +4966,34 @@ F: drivers/char/toshiba.c F: include/linux/toshiba.h TMIO MMC DRIVER -P: Ian Molton -M: ian@mnementh.co.uk +M: Ian Molton S: Maintained F: drivers/mmc/host/tmio_mmc.* TMPFS (SHMEM FILESYSTEM) -P: Hugh Dickins -M: hugh.dickins@tiscali.co.uk +M: Hugh Dickins L: linux-mm@kvack.org S: Maintained F: include/linux/shmem_fs.h F: mm/shmem.c TPM DEVICE DRIVER -P: Debora Velarde -M: debora@linux.vnet.ibm.com -P: Rajiv Andrade -M: srajiv@linux.vnet.ibm.com +M: Debora Velarde +M: Rajiv Andrade W: http://tpmdd.sourceforge.net -P: Marcel Selhorst -M: m.selhorst@sirrix.com +M: Marcel Selhorst W: http://www.sirrix.com L: tpmdd-devel@lists.sourceforge.net (moderated for non-subscribers) S: Maintained F: drivers/char/tpm/ TRIVIAL PATCHES -P: Jiri Kosina -M: trivial@kernel.org +M: Jiri Kosina T: git git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial.git S: Maintained TTY LAYER -P: Alan Cox -M: alan@lxorguk.ukuu.org.uk +M: Alan Cox S: Maintained T: stgit http://zeniv.linux.org.uk/~alan/ttydev/ F: drivers/char/tty_* @@ -5807,17 +5003,14 @@ F: include/linux/serial.h F: include/linux/tty.h TULIP NETWORK DRIVERS -P: Grant Grundler -M: grundler@parisc-linux.org -P: Kyle McMartin -M: kyle@mcmartin.ca +M: Grant Grundler +M: Kyle McMartin L: netdev@vger.kernel.org S: Maintained F: drivers/net/tulip/ TUN/TAP driver -P: Maxim Krasnyansky -M: maxk@qualcomm.com +M: Maxim Krasnyansky L: vtun@office.satix.net W: http://vtun.sourceforge.net/tun S: Maintained @@ -5825,24 +5018,20 @@ F: Documentation/networking/tuntap.txt F: arch/um/os-Linux/drivers/ TURBOCHANNEL SUBSYSTEM -P: Maciej W. Rozycki -M: macro@linux-mips.org +M: "Maciej W. Rozycki" S: Maintained F: drivers/tc/ F: include/linux/tc.h U14-34F SCSI DRIVER -P: Dario Ballabio -M: ballabio_dario@emc.com +M: Dario Ballabio L: linux-scsi@vger.kernel.org S: Maintained F: drivers/scsi/u14-34f.c UBI FILE SYSTEM (UBIFS) -P: Artem Bityutskiy -M: dedekind@infradead.org -P: Adrian Hunter -M: adrian.hunter@nokia.com +M: Artem Bityutskiy +M: Adrian Hunter L: linux-mtd@lists.infradead.org T: git git://git.infradead.org/ubifs-2.6.git W: http://www.linux-mtd.infradead.org/doc/ubifs.html @@ -5851,37 +5040,32 @@ F: Documentation/filesystems/ubifs.txt F: fs/ubifs/ UCLINUX (AND M68KNOMMU) -P: Greg Ungerer -M: gerg@uclinux.org +M: Greg Ungerer W: http://www.uclinux.org/ L: uclinux-dev@uclinux.org (subscribers-only) S: Maintained F: arch/m68knommu/ UCLINUX FOR RENESAS H8/300 (H8300) -P: Yoshinori Sato -M: ysato@users.sourceforge.jp +M: Yoshinori Sato W: http://uclinux-h8.sourceforge.jp/ S: Supported UDF FILESYSTEM -P: Jan Kara -M: jack@suse.cz +M: Jan Kara W: http://linux-udf.sourceforge.net S: Maintained F: Documentation/filesystems/udf.txt F: fs/udf/ UFS FILESYSTEM -P: Evgeniy Dushistov -M: dushistov@mail.ru +M: Evgeniy Dushistov S: Maintained F: Documentation/filesystems/ufs.txt F: fs/ufs/ ULTRA-WIDEBAND (UWB) SUBSYSTEM: -P: David Vrabel -M: david.vrabel@csr.com +M: David Vrabel L: linux-usb@vger.kernel.org S: Supported F: drivers/uwb/* @@ -5889,8 +5073,7 @@ F: include/linux/uwb.h F: include/linux/uwb/ UNIFORM CDROM DRIVER -P: Jens Axboe -M: axboe@kernel.dk +M: Jens Axboe W: http://www.kernel.dk S: Maintained F: Documentation/cdrom/ @@ -5898,8 +5081,7 @@ F: drivers/cdrom/cdrom.c F: include/linux/cdrom.h UNSORTED BLOCK IMAGES (UBI) -P: Artem Bityutskiy -M: dedekind@infradead.org +M: Artem Bityutskiy W: http://www.linux-mtd.infradead.org/ L: linux-mtd@lists.infradead.org T: git git://git.infradead.org/ubi-2.6.git @@ -5909,23 +5091,20 @@ F: include/linux/mtd/ubi.h F: include/mtd/ubi-user.h USB ACM DRIVER -P: Oliver Neukum -M: oliver@neukum.name +M: Oliver Neukum L: linux-usb@vger.kernel.org S: Maintained F: Documentation/usb/acm.txt F: drivers/usb/class/cdc-acm.* USB BLOCK DRIVER (UB ub) -P: Pete Zaitcev -M: zaitcev@redhat.com +M: Pete Zaitcev L: linux-usb@vger.kernel.org S: Supported F: drivers/block/ub.c USB CDC ETHERNET DRIVER -P: Greg Kroah-Hartman -M: greg@kroah.com +M: Greg Kroah-Hartman L: linux-usb@vger.kernel.org S: Maintained W: http://www.kroah.com/linux-usb/ @@ -5933,39 +5112,34 @@ F: drivers/net/usb/cdc_*.c F: include/linux/usb/cdc.h USB CYPRESS C67X00 DRIVER -P: Peter Korsgaard -M: jacmet@sunsite.dk +M: Peter Korsgaard L: linux-usb@vger.kernel.org S: Maintained F: drivers/usb/c67x00/ USB DAVICOM DM9601 DRIVER -P: Peter Korsgaard -M: jacmet@sunsite.dk +M: Peter Korsgaard L: netdev@vger.kernel.org W: http://www.linux-usb.org/usbnet S: Maintained F: drivers/net/usb/dm9601.c USB DIAMOND RIO500 DRIVER -P: Cesar Miquel -M: miquel@df.uba.ar +M: Cesar Miquel L: rio500-users@lists.sourceforge.net W: http://rio500.sourceforge.net S: Maintained F: drivers/usb/misc/rio500* USB EHCI DRIVER -P: David Brownell -M: dbrownell@users.sourceforge.net +M: David Brownell L: linux-usb@vger.kernel.org S: Odd Fixes F: Documentation/usb/ehci.txt F: drivers/usb/host/ehci* USB ET61X[12]51 DRIVER -P: Luca Risolia -M: luca.risolia@studio.unibo.it +M: Luca Risolia L: linux-usb@vger.kernel.org L: linux-media@vger.kernel.org T: git git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6.git @@ -5974,8 +5148,7 @@ S: Maintained F: drivers/media/video/et61x251/ USB GADGET/PERIPHERAL SUBSYSTEM -P: David Brownell -M: dbrownell@users.sourceforge.net +M: David Brownell L: linux-usb@vger.kernel.org W: http://www.linux-usb.org/gadget S: Maintained @@ -5983,8 +5156,7 @@ F: drivers/usb/gadget/ F: include/linux/usb/gadget* USB HID/HIDBP DRIVERS (USB KEYBOARDS, MICE, REMOTE CONTROLS, ...) -P: Jiri Kosina -M: jkosina@suse.cz +M: Jiri Kosina L: linux-usb@vger.kernel.org T: git git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid.git S: Maintained @@ -5992,23 +5164,20 @@ F: Documentation/usb/hiddev.txt F: drivers/hid/usbhid/ USB ISP116X DRIVER -P: Olav Kongas -M: ok@artecdesign.ee +M: Olav Kongas L: linux-usb@vger.kernel.org S: Maintained F: drivers/usb/host/isp116x* F: include/linux/usb/isp116x.h USB KAWASAKI LSI DRIVER -P: Oliver Neukum -M: oliver@neukum.name +M: Oliver Neukum L: linux-usb@vger.kernel.org S: Maintained F: drivers/usb/serial/kl5kusb105.* USB MASS STORAGE DRIVER -P: Matthew Dharm -M: mdharm-usb@one-eyed-alien.net +M: Matthew Dharm L: linux-usb@vger.kernel.org L: usb-storage@lists.one-eyed-alien.net S: Maintained @@ -6016,31 +5185,27 @@ W: http://www.one-eyed-alien.net/~mdharm/linux-usb/ F: drivers/usb/storage/ USB OHCI DRIVER -P: David Brownell -M: dbrownell@users.sourceforge.net +M: David Brownell L: linux-usb@vger.kernel.org S: Odd Fixes F: Documentation/usb/ohci.txt F: drivers/usb/host/ohci* USB OPTION-CARD DRIVER -P: Matthias Urlichs -M: smurf@smurf.noris.de +M: Matthias Urlichs L: linux-usb@vger.kernel.org S: Maintained F: drivers/usb/serial/option.c USB OV511 DRIVER -P: Mark McClelland -M: mmcclell@bigfoot.com +M: Mark McClelland L: linux-usb@vger.kernel.org W: http://alpha.dyndns.org/ov511/ S: Maintained F: drivers/media/video/ov511.* USB PEGASUS DRIVER -P: Petko Manolov -M: petkan@users.sourceforge.net +M: Petko Manolov L: linux-usb@vger.kernel.org L: netdev@vger.kernel.org W: http://pegasus2.sourceforge.net/ @@ -6048,15 +5213,13 @@ S: Maintained F: drivers/net/usb/pegasus.* USB PRINTER DRIVER (usblp) -P: Pete Zaitcev -M: zaitcev@redhat.com +M: Pete Zaitcev L: linux-usb@vger.kernel.org S: Supported F: drivers/usb/class/usblp.c USB RTL8150 DRIVER -P: Petko Manolov -M: petkan@users.sourceforge.net +M: Petko Manolov L: linux-usb@vger.kernel.org L: netdev@vger.kernel.org W: http://pegasus2.sourceforge.net/ @@ -6064,8 +5227,7 @@ S: Maintained F: drivers/net/usb/rtl8150.c USB SE401 DRIVER -P: Jeroen Vreeken -M: pe1rxq@amsat.org +M: Jeroen Vreeken L: linux-usb@vger.kernel.org W: http://www.chello.nl/~j.vreeken/se401/ S: Maintained @@ -6073,15 +5235,13 @@ F: Documentation/video4linux/se401.txt F: drivers/media/video/se401.* USB SERIAL BELKIN F5U103 DRIVER -P: William Greathouse -M: wgreathouse@smva.com +M: William Greathouse L: linux-usb@vger.kernel.org S: Maintained F: drivers/usb/serial/belkin_sa.* USB SERIAL CYPRESS M8 DRIVER -P: Lonnie Mendez -M: dignome@gmail.com +M: Lonnie Mendez L: linux-usb@vger.kernel.org S: Maintained W: http://geocities.com/i0xox0i @@ -6089,24 +5249,20 @@ W: http://firstlight.net/cvs F: drivers/usb/serial/cypress_m8.* USB SERIAL CYBERJACK DRIVER -P: Matthias Bruestle and Harald Welte -M: support@reiner-sct.com +M: Matthias Bruestle and Harald Welte W: http://www.reiner-sct.de/support/treiber_cyberjack.php S: Maintained F: drivers/usb/serial/cyberjack.c USB SERIAL DIGI ACCELEPORT DRIVER -P: Peter Berger -M: pberger@brimson.com -P: Al Borchers -M: alborchers@steinerpoint.com +M: Peter Berger +M: Al Borchers L: linux-usb@vger.kernel.org S: Maintained F: drivers/usb/serial/digi_acceleport.c USB SERIAL DRIVER -P: Greg Kroah-Hartman -M: gregkh@suse.de +M: Greg Kroah-Hartman L: linux-usb@vger.kernel.org S: Supported F: Documentation/usb/usb-serial.txt @@ -6115,38 +5271,33 @@ F: drivers/usb/serial/usb-serial.c F: include/linux/usb/serial.h USB SERIAL EMPEG EMPEG-CAR MARK I/II DRIVER -P: Gary Brubaker -M: xavyer@ix.netcom.com +M: Gary Brubaker L: linux-usb@vger.kernel.org S: Maintained F: drivers/usb/serial/empeg.c USB SERIAL KEYSPAN DRIVER -P: Greg Kroah-Hartman -M: greg@kroah.com +M: Greg Kroah-Hartman L: linux-usb@vger.kernel.org W: http://www.kroah.com/linux/ S: Maintained F: drivers/usb/serial/*keyspan* USB SERIAL WHITEHEAT DRIVER -P: Support Department -M: support@connecttech.com +M: Support Department L: linux-usb@vger.kernel.org W: http://www.connecttech.com S: Supported F: drivers/usb/serial/whiteheat* USB SMSC95XX ETHERNET DRIVER -P: Steve Glendinning -M: steve.glendinning@smsc.com +M: Steve Glendinning L: netdev@vger.kernel.org S: Supported F: drivers/net/usb/smsc95xx.* USB SN9C1xx DRIVER -P: Luca Risolia -M: luca.risolia@studio.unibo.it +M: Luca Risolia L: linux-usb@vger.kernel.org L: linux-media@vger.kernel.org T: git git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6.git @@ -6156,8 +5307,7 @@ F: Documentation/video4linux/sn9c102.txt F: drivers/media/video/sn9c102/ USB SUBSYSTEM -P: Greg Kroah-Hartman -M: gregkh@suse.de +M: Greg Kroah-Hartman L: linux-usb@vger.kernel.org W: http://www.linux-usb.org T: quilt kernel.org/pub/linux/kernel/people/gregkh/gregkh-2.6/ @@ -6169,15 +5319,13 @@ F: include/linux/usb.h F: include/linux/usb/ USB UHCI DRIVER -P: Alan Stern -M: stern@rowland.harvard.edu +M: Alan Stern L: linux-usb@vger.kernel.org S: Maintained F: drivers/usb/host/uhci* USB "USBNET" DRIVER FRAMEWORK -P: David Brownell -M: dbrownell@users.sourceforge.net +M: David Brownell L: netdev@vger.kernel.org W: http://www.linux-usb.org/usbnet S: Maintained @@ -6185,8 +5333,7 @@ F: drivers/net/usb/usbnet.c F: include/linux/usb/usbnet.h USB VIDEO CLASS -P: Laurent Pinchart -M: laurent.pinchart@skynet.be +M: Laurent Pinchart L: linux-uvc-devel@lists.berlios.de (subscribers-only) L: linux-media@vger.kernel.org T: git git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6.git @@ -6195,8 +5342,7 @@ S: Maintained F: drivers/media/video/uvc/ USB W996[87]CF DRIVER -P: Luca Risolia -M: luca.risolia@studio.unibo.it +M: Luca Risolia L: linux-usb@vger.kernel.org L: linux-media@vger.kernel.org T: git git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6.git @@ -6206,21 +5352,18 @@ F: Documentation/video4linux/w9968cf.txt F: drivers/media/video/w996* USB WIRELESS RNDIS DRIVER (rndis_wlan) -P: Jussi Kivilinna -M: jussi.kivilinna@mbnet.fi +M: Jussi Kivilinna L: linux-wireless@vger.kernel.org S: Maintained F: drivers/net/wireless/rndis_wlan.c USB XHCI DRIVER -P: Sarah Sharp -M: sarah.a.sharp@intel.com +M: Sarah Sharp L: linux-usb@vger.kernel.org S: Supported USB ZC0301 DRIVER -P: Luca Risolia -M: luca.risolia@studio.unibo.it +M: Luca Risolia L: linux-usb@vger.kernel.org L: linux-media@vger.kernel.org T: git git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6.git @@ -6230,16 +5373,14 @@ F: Documentation/video4linux/zc0301.txt F: drivers/media/video/zc0301/ USB ZD1201 DRIVER -P: Jeroen Vreeken -M: pe1rxq@amsat.org +M: Jeroen Vreeken L: linux-usb@vger.kernel.org W: http://linux-lc100020.sourceforge.net S: Maintained F: drivers/net/wireless/zd1201.* USB ZR364XX DRIVER -P: Antoine Jacquet -M: royale@zerezo.com +M: Antoine Jacquet L: linux-usb@vger.kernel.org L: linux-media@vger.kernel.org T: git git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6.git @@ -6249,8 +5390,7 @@ F: Documentation/video4linux/zr364xx.txt F: drivers/media/video/zr364xx.c USER-MODE LINUX (UML) -P: Jeff Dike -M: jdike@addtoit.com +M: Jeff Dike L: user-mode-linux-devel@lists.sourceforge.net L: user-mode-linux-user@lists.sourceforge.net W: http://user-mode-linux.sourceforge.net @@ -6261,26 +5401,22 @@ F: fs/hostfs/ F: fs/hppfs/ USERSPACE I/O (UIO) -P: Hans J. Koch -M: hjk@linutronix.de -P: Greg Kroah-Hartman -M: gregkh@suse.de +M: "Hans J. Koch" +M: Greg Kroah-Hartman S: Maintained F: Documentation/DocBook/uio-howto.tmpl F: drivers/uio/ F: include/linux/uio*.h UTIL-LINUX-NG PACKAGE -P: Karel Zak -M: kzak@redhat.com +M: Karel Zak L: util-linux-ng@vger.kernel.org W: http://kernel.org/~kzak/util-linux-ng/ T: git git://git.kernel.org/pub/scm/utils/util-linux-ng/util-linux-ng.git S: Maintained UVESAFB DRIVER -P: Michal Januszewski -M: spock@gentoo.org +M: Michal Januszewski L: linux-fbdev-devel@lists.sourceforge.net (moderated for non-subscribers) W: http://dev.gentoo.org/~spock/projects/uvesafb/ S: Maintained @@ -6288,53 +5424,44 @@ F: Documentation/fb/uvesafb.txt F: drivers/video/uvesafb.* VFAT/FAT/MSDOS FILESYSTEM -P: OGAWA Hirofumi -M: hirofumi@mail.parknet.co.jp +M: OGAWA Hirofumi S: Maintained F: Documentation/filesystems/vfat.txt F: fs/fat/ VIA RHINE NETWORK DRIVER -P: Roger Luethi -M: rl@hellgate.ch +M: Roger Luethi S: Maintained F: drivers/net/via-rhine.c VIAPRO SMBUS DRIVER -P: Jean Delvare -M: khali@linux-fr.org +M: Jean Delvare L: linux-i2c@vger.kernel.org S: Maintained F: Documentation/i2c/busses/i2c-viapro F: drivers/i2c/busses/i2c-viapro.c VIA SD/MMC CARD CONTROLLER DRIVER -P: Joseph Chan -M: JosephChan@via.com.tw -P: Harald Welte -M: HaraldWelte@viatech.com +M: Joseph Chan +M: Harald Welte S: Maintained F: drivers/mmc/host/via-sdmmc.c VIA UNICHROME(PRO)/CHROME9 FRAMEBUFFER DRIVER -P: Joseph Chan -M: JosephChan@via.com.tw -P: Scott Fang -M: ScottFang@viatech.com.cn +M: Joseph Chan +M: Scott Fang L: linux-fbdev-devel@lists.sourceforge.net (moderated for non-subscribers) S: Maintained F: drivers/video/via/ VIA VELOCITY NETWORK DRIVER -P: Francois Romieu -M: romieu@fr.zoreil.com +M: Francois Romieu L: netdev@vger.kernel.org S: Maintained F: drivers/net/via-velocity.* VLAN (802.1Q) -P: Patrick McHardy -M: kaber@trash.net +M: Patrick McHardy L: netdev@vger.kernel.org S: Maintained F: drivers/net/macvlan.c @@ -6342,18 +5469,15 @@ F: include/linux/if_*vlan.h F: net/8021q/ VLYNQ BUS -P: Florian Fainelli -M: florian@openwrt.org +M: Florian Fainelli L: openwrt-devel@lists.openwrt.org S: Maintained F: drivers/vlynq/vlynq.c F: include/linux/vlynq.h VOLTAGE AND CURRENT REGULATOR FRAMEWORK -P: Liam Girdwood -M: lrg@slimlogic.co.uk -P: Mark Brown -M: broonie@opensource.wolfsonmicro.com +M: Liam Girdwood +M: Mark Brown W: http://opensource.wolfsonmicro.com/node/15 W: http://www.slimlogic.co.uk/?p=48 T: git git://git.kernel.org/pub/scm/linux/kernel/git/lrg/voltage-2.6.git @@ -6362,52 +5486,45 @@ F: drivers/regulator/ F: include/linux/regulator/ VT1211 HARDWARE MONITOR DRIVER -P: Juerg Haefliger -M: juergh@gmail.com +M: Juerg Haefliger L: lm-sensors@lm-sensors.org S: Maintained F: Documentation/hwmon/vt1211 F: drivers/hwmon/vt1211.c VT8231 HARDWARE MONITOR DRIVER -P: Roger Lucas -M: vt8231@hiddenengine.co.uk +M: Roger Lucas L: lm-sensors@lm-sensors.org S: Maintained F: drivers/hwmon/vt8231.c W1 DALLAS'S 1-WIRE BUS -P: Evgeniy Polyakov -M: johnpol@2ka.mipt.ru +M: Evgeniy Polyakov S: Maintained F: Documentation/w1/ F: drivers/w1/ W83791D HARDWARE MONITORING DRIVER -P: Marc Hulsman -M: m.hulsman@tudelft.nl +M: Marc Hulsman L: lm-sensors@lm-sensors.org S: Maintained F: Documentation/hwmon/w83791d F: drivers/hwmon/w83791d.c W83793 HARDWARE MONITORING DRIVER -P: Rudolf Marek -M: r.marek@assembler.cz +M: Rudolf Marek L: lm-sensors@lm-sensors.org S: Maintained F: Documentation/hwmon/w83793 F: drivers/hwmon/w83793.c W83L51xD SD/MMC CARD INTERFACE DRIVER -P: Pierre Ossman -M: pierre@ossman.eu +M: Pierre Ossman S: Maintained F: drivers/mmc/host/wbsd.* WATCHDOG DEVICE DRIVERS -P: Wim Van Sebroeck -M: wim@iguana.be +M: Wim Van Sebroeck T: git git://git.kernel.org/pub/scm/linux/kernel/git/wim/linux-2.6-watchdog.git S: Maintained F: Documentation/watchdog/ @@ -6415,8 +5532,7 @@ F: drivers/watchdog/ F: include/linux/watchdog.h WAVELAN NETWORK DRIVER & WIRELESS EXTENSIONS -P: Jean Tourrilhes -M: jt@hpl.hp.com +M: Jean Tourrilhes L: linux-wireless@vger.kernel.org W: http://www.hpl.hp.com/personal/Jean_Tourrilhes/Linux/ S: Maintained @@ -6424,46 +5540,39 @@ F: Documentation/networking/wavelan.txt F: drivers/net/wireless/wavelan* WD7000 SCSI DRIVER -P: Miroslav Zagorac -M: zaga@fly.cc.fer.hr +M: Miroslav Zagorac L: linux-scsi@vger.kernel.org S: Maintained F: drivers/scsi/wd7000.c WIMAX STACK -P: Inaky Perez-Gonzalez -M: inaky.perez-gonzalez@intel.com +M: Inaky Perez-Gonzalez M: linux-wimax@intel.com L: wimax@linuxwimax.org S: Supported W: http://linuxwimax.org WIMEDIA LLC PROTOCOL (WLP) SUBSYSTEM -P: David Vrabel -M: david.vrabel@csr.com +M: David Vrabel S: Maintained F: include/linux/wlp.h F: drivers/uwb/wlp/ WISTRON LAPTOP BUTTON DRIVER -P: Miloslav Trmac -M: mitr@volny.cz +M: Miloslav Trmac S: Maintained F: drivers/input/misc/wistron_btns.c WL3501 WIRELESS PCMCIA CARD DRIVER -P: Arnaldo Carvalho de Melo -M: acme@ghostprotocols.net +M: Arnaldo Carvalho de Melo L: linux-wireless@vger.kernel.org W: http://oops.ghostprotocols.net:81/blog S: Maintained F: drivers/net/wireless/wl3501* WM97XX TOUCHSCREEN DRIVERS -P: Mark Brown -M: broonie@opensource.wolfsonmicro.com -P: Liam Girdwood -M: lrg@slimlogic.co.uk +M: Mark Brown +M: Liam Girdwood L: linux-input@vger.kernel.org T: git git://opensource.wolfsonmicro.com/linux-2.6-touch W: http://opensource.wolfsonmicro.com/node/7 @@ -6472,8 +5581,7 @@ F: drivers/input/touchscreen/*wm97* F: include/linux/wm97xx.h X.25 NETWORK LAYER -P: Henner Eisen -M: eis@baty.hanse.de +M: Henner Eisen L: linux-x25@vger.kernel.org S: Maintained F: Documentation/networking/x25* @@ -6481,12 +5589,9 @@ F: include/net/x25* F: net/x25/ X86 ARCHITECTURE (32-BIT AND 64-BIT) -P: Thomas Gleixner -M: tglx@linutronix.de -P: Ingo Molnar -M: mingo@redhat.com -P: H. Peter Anvin -M: hpa@zytor.com +M: Thomas Gleixner +M: Ingo Molnar +M: "H. Peter Anvin" M: x86@kernel.org T: git git://git.kernel.org/pub/scm/linux/kernel/git/x86/linux-2.6-x86.git S: Maintained @@ -6494,10 +5599,8 @@ F: Documentation/x86/ F: arch/x86/ XEN HYPERVISOR INTERFACE -P: Jeremy Fitzhardinge -M: jeremy@xensource.com -P: Chris Wright -M: chrisw@sous-sol.org +M: Jeremy Fitzhardinge +M: Chris Wright L: virtualization@lists.osdl.org L: xen-devel@lists.xensource.com S: Supported @@ -6509,8 +5612,7 @@ F: include/xen/ XFS FILESYSTEM P: Silicon Graphics Inc -P: Felix Blyakher -M: felixb@sgi.com +M: Felix Blyakher M: xfs-masters@oss.sgi.com L: xfs@oss.sgi.com W: http://oss.sgi.com/projects/xfs @@ -6520,38 +5622,33 @@ F: Documentation/filesystems/xfs.txt F: fs/xfs/ XILINX SYSTEMACE DRIVER -P: Grant Likely -M: grant.likely@secretlab.ca +M: Grant Likely W: http://www.secretlab.ca/ S: Maintained F: drivers/block/xsysace.c XILINX UARTLITE SERIAL DRIVER -P: Peter Korsgaard -M: jacmet@sunsite.dk +M: Peter Korsgaard L: linux-serial@vger.kernel.org S: Maintained F: drivers/serial/uartlite.c YAM DRIVER FOR AX.25 -P: Jean-Paul Roubelat -M: jpr@f6fbb.org +M: Jean-Paul Roubelat L: linux-hams@vger.kernel.org S: Maintained F: drivers/net/hamradio/yam* F: include/linux/yam.h YEALINK PHONE DRIVER -P: Henk Vergonet -M: Henk.Vergonet@gmail.com +M: Henk Vergonet L: usbb2k-api-dev@nongnu.org S: Maintained F: Documentation/input/yealink.txt F: drivers/input/misc/yealink.* Z8530 DRIVER FOR AX.25 -P: Joerg Reuter -M: jreuter@yaina.de +M: Joerg Reuter W: http://yaina.de/jreuter/ W: http://www.qsl.net/dl1bke/ L: linux-hams@vger.kernel.org @@ -6561,10 +5658,8 @@ F: drivers/net/hamradio/*scc.c F: drivers/net/hamradio/z8530.h ZD1211RW WIRELESS DRIVER -P: Daniel Drake -M: dsd@gentoo.org -P: Ulrich Kunitz -M: kune@deine-taler.de +M: Daniel Drake +M: Ulrich Kunitz W: http://zd1211.ath.cx/wiki/DriverRewrite L: linux-wireless@vger.kernel.org L: zd1211-devs@lists.sourceforge.net (subscribers-only) @@ -6580,14 +5675,12 @@ S: Odd Fixes F: drivers/media/video/zoran/ ZS DECSTATION Z85C30 SERIAL DRIVER -P: Maciej W. Rozycki -M: macro@linux-mips.org +M: "Maciej W. Rozycki" S: Maintained F: drivers/serial/zs.* THE REST -P: Linus Torvalds -M: torvalds@linux-foundation.org +M: Linus Torvalds L: linux-kernel@vger.kernel.org T: git git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux-2.6.git S: Buried alive in reporters -- cgit v1.2.3 From 2bed6eeb8cb0b5198d8f93e415ee595704bc3534 Mon Sep 17 00:00:00 2001 From: Joe Perches Date: Wed, 29 Jul 2009 15:04:32 -0700 Subject: MAINTAINERS: finish off the email address coalescing Add some touchups to the sample record. Signed-off-by: Joe Perches Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- MAINTAINERS | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/MAINTAINERS b/MAINTAINERS index a013e963fc0..a39f3cf940b 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -73,8 +73,8 @@ Note: For the hard of thinking, this list is meant to remain in alphabetical order. If you could add yourselves to it in alphabetical order that would be so much easier [Ed] -P: Person -M: Mail patches to +P: Person (obsolete) +M: Mail patches to: FullName L: Mailing list that is relevant to this area W: Web-page with status/info T: SCM tree type and location. Type is one of: git, hg, quilt, stgit. -- cgit v1.2.3 From 084bad91afd0f40ff4db9ceb56e29234c314d8d1 Mon Sep 17 00:00:00 2001 From: Kristoffer Ericson Date: Wed, 29 Jul 2009 15:04:32 -0700 Subject: MAINTAINERS: update HP Jornada 700-series and Epson s1d13xxxfb support Add the relevant git repositories and affected files to the maintainership of HP Jornada 700-series and Epson s1d13xxxfb support. Signed-off-by: Kristoffer Ericson Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- MAINTAINERS | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/MAINTAINERS b/MAINTAINERS index a39f3cf940b..66a3865da88 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -624,6 +624,9 @@ ARM/HP JORNADA 7XX MACHINE SUPPORT M: Kristoffer Ericson W: www.jlime.com S: Maintained +T: git git://git.kernel.org/pub/scm/linux/kernel/git/kristoffer/linux-hpc.git +F: arch/arm/mach-sa1100/jornada720.c +F: arch/arm/mach-sa1100/include/mach/jornada720.h ARM/INTEL IOP32X ARM ARCHITECTURE M: Lennert Buytenhek @@ -1900,6 +1903,7 @@ F: drivers/video/epson1355fb.c EPSON S1D13XXX FRAMEBUFFER DRIVER M: Kristoffer Ericson S: Maintained +T: git git://git.kernel.org/pub/scm/linux/kernel/git/kristoffer/linux-hpc.git F: drivers/video/s1d13xxxfb.c F: include/video/s1d13xxxfb.h -- cgit v1.2.3 From 5156ddce6c0a152ee7ccab2c976c6a8abc8a49b5 Mon Sep 17 00:00:00 2001 From: Kumar Gala Date: Wed, 29 Jul 2009 23:04:25 -0500 Subject: powerpc/mm: Fix SMP issue with MMU context handling code In switch_mmu_context() if we call steal_context_smp() to get a context to use we shouldn't fall through and than call steal_context_up(). Doing so can be problematic in that the 'mm' that steal_context_up() ends up using will not get marked dirty in the stale_map[] for other CPUs that might have used that mm. Thus we could end up with stale TLB entries in the other CPUs that can cause all kinda of havoc. Signed-off-by: Kumar Gala --- arch/powerpc/mm/mmu_context_nohash.c | 1 + 1 file changed, 1 insertion(+) diff --git a/arch/powerpc/mm/mmu_context_nohash.c b/arch/powerpc/mm/mmu_context_nohash.c index 92a197117d5..b1a727def15 100644 --- a/arch/powerpc/mm/mmu_context_nohash.c +++ b/arch/powerpc/mm/mmu_context_nohash.c @@ -217,6 +217,7 @@ void switch_mmu_context(struct mm_struct *prev, struct mm_struct *next) id = steal_context_smp(id); if (id == MMU_NO_CONTEXT) goto again; + goto stolen; } #endif /* CONFIG_SMP */ id = steal_context_up(id); -- cgit v1.2.3 From c4673f9a32d7b02bcd2057763d3d368efe5809c3 Mon Sep 17 00:00:00 2001 From: Anton Vorontsov Date: Wed, 24 Jun 2009 20:30:28 +0400 Subject: powerpc/85xx: Fix ethernet link detection on MPC8569E-MDS boards Linux isn't able to detect link changes on ethernet ports that were used by U-Boot. This is because U-Boot wrongly clears interrupt polarity bit (INTPOL, 0x400) in the extended status register (EXT_SR, 0x1b) of Marvell PHYs. There is no easy way for PHY drivers to know IRQ line polarity (we could extract it from the device tree and pass it to phydevs, but that'll be quite a lot of work), so for now just reset the PHYs to their default states. Signed-off-by: Anton Vorontsov Signed-off-by: Kumar Gala --- arch/powerpc/platforms/85xx/mpc85xx_mds.c | 13 +++++++++++++ 1 file changed, 13 insertions(+) diff --git a/arch/powerpc/platforms/85xx/mpc85xx_mds.c b/arch/powerpc/platforms/85xx/mpc85xx_mds.c index 60ed9c067b1..bfb32834ab0 100644 --- a/arch/powerpc/platforms/85xx/mpc85xx_mds.c +++ b/arch/powerpc/platforms/85xx/mpc85xx_mds.c @@ -233,6 +233,19 @@ static void __init mpc85xx_mds_setup_arch(void) /* Turn UCC1 & UCC2 on */ setbits8(&bcsr_regs[8], BCSR_UCC1_GETH_EN); setbits8(&bcsr_regs[9], BCSR_UCC2_GETH_EN); + } else if (machine_is(mpc8569_mds)) { +#define BCSR7_UCC12_GETHnRST (0x1 << 2) +#define BCSR8_UEM_MARVELL_RST (0x1 << 1) + /* + * U-Boot mangles interrupt polarity for Marvell PHYs, + * so reset built-in and UEM Marvell PHYs, this puts + * the PHYs into their normal state. + */ + clrbits8(&bcsr_regs[7], BCSR7_UCC12_GETHnRST); + setbits8(&bcsr_regs[8], BCSR8_UEM_MARVELL_RST); + + setbits8(&bcsr_regs[7], BCSR7_UCC12_GETHnRST); + clrbits8(&bcsr_regs[8], BCSR8_UEM_MARVELL_RST); } iounmap(bcsr_regs); } -- cgit v1.2.3 From 8a0b177f367a8fd03dc5ba1f5a4494d1424471aa Mon Sep 17 00:00:00 2001 From: Anton Vorontsov Date: Wed, 1 Jul 2009 21:39:25 +0400 Subject: powerpc/85xx: Don't scan for TBI PHY addresses on MPC8569E-MDS boards Sometimes (e.g. when there are no UEMs attached to a board) fsl_pq_mdio_find_free() fails to find a spare address for a TBI PHY, this is because get_phy_id() returns bogus 0x0000ffff values (0xffffffff is expected), and therefore mdio bus probing fails with the following message: fsl-pq_mdio: probe of e0082120.mdio failed with error -16 And obviously ethernet doesn't work after this. This patch solves the problem by adding tbi-phy node into mdio node, so that we won't scan for spare addresses, we'll just use a fixed one. Signed-off-by: Anton Vorontsov Signed-off-by: Kumar Gala --- arch/powerpc/boot/dts/mpc8569mds.dts | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/arch/powerpc/boot/dts/mpc8569mds.dts b/arch/powerpc/boot/dts/mpc8569mds.dts index a680165292f..9e4ce99e161 100644 --- a/arch/powerpc/boot/dts/mpc8569mds.dts +++ b/arch/powerpc/boot/dts/mpc8569mds.dts @@ -501,6 +501,10 @@ reg = <0x6>; device_type = "ethernet-phy"; }; + tbi-phy@11 { + reg = <0x11>; + device_type = "tbi-phy"; + }; }; mdio@3520 { #address-cells = <1>; -- cgit v1.2.3 From 1333c3d6d35bdb109ddbd4b7086cbf066a27b156 Mon Sep 17 00:00:00 2001 From: Anton Vorontsov Date: Tue, 21 Jul 2009 01:36:43 +0400 Subject: powerpc/83xx: Fix PCI IO base address on MPC837xE-RDB boards U-Boot maps PCI IO at 0xe0300000, while current dts files specify 0xe2000000. This leads to the following oops with CONFIG_8139TOO_PIO=y. 8139too Fast Ethernet driver 0.9.28 Machine check in kernel mode. Caused by (from SRR1=41000): Transfer error ack signal Oops: Machine check, sig: 7 [#1] MPC837x RDB [...] NIP [00000900] 0x900 LR [c0439df8] rtl8139_init_board+0x238/0x524 Call Trace: [cf831d90] [c0439dcc] rtl8139_init_board+0x20c/0x524 (unreliable) [cf831de0] [c043a15c] rtl8139_init_one+0x78/0x65c [cf831e40] [c0235250] pci_call_probe+0x20/0x30 [...] This patch fixes the issue by specifying the correct PCI IO base address. Signed-off-by: Anton Vorontsov Signed-off-by: Kumar Gala --- arch/powerpc/boot/dts/mpc8377_rdb.dts | 2 +- arch/powerpc/boot/dts/mpc8378_rdb.dts | 2 +- arch/powerpc/boot/dts/mpc8379_rdb.dts | 2 +- 3 files changed, 3 insertions(+), 3 deletions(-) diff --git a/arch/powerpc/boot/dts/mpc8377_rdb.dts b/arch/powerpc/boot/dts/mpc8377_rdb.dts index 224b4f0704b..4f06dbc0d27 100644 --- a/arch/powerpc/boot/dts/mpc8377_rdb.dts +++ b/arch/powerpc/boot/dts/mpc8377_rdb.dts @@ -410,7 +410,7 @@ bus-range = <0 0>; ranges = <0x02000000 0x0 0x90000000 0x90000000 0x0 0x10000000 0x42000000 0x0 0x80000000 0x80000000 0x0 0x10000000 - 0x01000000 0x0 0x00000000 0xe2000000 0x0 0x00100000>; + 0x01000000 0x0 0x00000000 0xe0300000 0x0 0x00100000>; sleep = <&pmc 0x00010000>; clock-frequency = <66666666>; #interrupt-cells = <1>; diff --git a/arch/powerpc/boot/dts/mpc8378_rdb.dts b/arch/powerpc/boot/dts/mpc8378_rdb.dts index 474ea2fa3f8..aabf3437cad 100644 --- a/arch/powerpc/boot/dts/mpc8378_rdb.dts +++ b/arch/powerpc/boot/dts/mpc8378_rdb.dts @@ -394,7 +394,7 @@ bus-range = <0 0>; ranges = <0x02000000 0x0 0x90000000 0x90000000 0x0 0x10000000 0x42000000 0x0 0x80000000 0x80000000 0x0 0x10000000 - 0x01000000 0x0 0x00000000 0xe2000000 0x0 0x00100000>; + 0x01000000 0x0 0x00000000 0xe0300000 0x0 0x00100000>; sleep = <&pmc 0x00010000>; clock-frequency = <66666666>; #interrupt-cells = <1>; diff --git a/arch/powerpc/boot/dts/mpc8379_rdb.dts b/arch/powerpc/boot/dts/mpc8379_rdb.dts index d4838af8d37..9b1da864d89 100644 --- a/arch/powerpc/boot/dts/mpc8379_rdb.dts +++ b/arch/powerpc/boot/dts/mpc8379_rdb.dts @@ -424,7 +424,7 @@ bus-range = <0x0 0x0>; ranges = <0x02000000 0x0 0x90000000 0x90000000 0x0 0x10000000 0x42000000 0x0 0x80000000 0x80000000 0x0 0x10000000 - 0x01000000 0x0 0x00000000 0xe2000000 0x0 0x00100000>; + 0x01000000 0x0 0x00000000 0xe0300000 0x0 0x00100000>; sleep = <&pmc 0x00010000>; clock-frequency = <66666666>; #interrupt-cells = <1>; -- cgit v1.2.3 From 6e900de3fff01e84c96632409359a84825c54b28 Mon Sep 17 00:00:00 2001 From: Mark Ware Date: Mon, 20 Jul 2009 21:51:03 +1000 Subject: cpm_uart: Don't use alloc_bootmem in cpm_uart_cpm2.c This is another alloc_bootmem() -> kzalloc() change, this time to fix the non-fatal badness caused when booting with a cpm2_uart console. Signed-off-by: Mark Ware Signed-off-by: Kumar Gala --- drivers/serial/cpm_uart/cpm_uart_cpm2.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/serial/cpm_uart/cpm_uart_cpm2.c b/drivers/serial/cpm_uart/cpm_uart_cpm2.c index 141c0a3333a..a9802e76b5f 100644 --- a/drivers/serial/cpm_uart/cpm_uart_cpm2.c +++ b/drivers/serial/cpm_uart/cpm_uart_cpm2.c @@ -132,7 +132,7 @@ int cpm_uart_allocbuf(struct uart_cpm_port *pinfo, unsigned int is_con) memsz = L1_CACHE_ALIGN(pinfo->rx_nrfifos * pinfo->rx_fifosize) + L1_CACHE_ALIGN(pinfo->tx_nrfifos * pinfo->tx_fifosize); if (is_con) { - mem_addr = alloc_bootmem(memsz); + mem_addr = kzalloc(memsz, GFP_NOWAIT); dma_addr = virt_to_bus(mem_addr); } else -- cgit v1.2.3 From f27d4d47dcf8906c8a22908dc1d32ec641e9fbe0 Mon Sep 17 00:00:00 2001 From: Martyn Welch Date: Thu, 2 Jul 2009 15:18:35 +0100 Subject: powerpc/86xx: Update defconfig for GE Fanuc's PPC9A General update of defconfig including the following notable changes: - Enable GPIO access via sysfs on GE Fanuc's PPC9A. - Enable Highmem support. - Support for PCMCIA based daughter card. Signed-off-by: Martyn Welch Signed-off-by: Kumar Gala --- arch/powerpc/configs/86xx/gef_ppc9a_defconfig | 518 ++++++++++---------------- 1 file changed, 196 insertions(+), 322 deletions(-) diff --git a/arch/powerpc/configs/86xx/gef_ppc9a_defconfig b/arch/powerpc/configs/86xx/gef_ppc9a_defconfig index b6a23af57f4..d8354d993b2 100644 --- a/arch/powerpc/configs/86xx/gef_ppc9a_defconfig +++ b/arch/powerpc/configs/86xx/gef_ppc9a_defconfig @@ -1,26 +1,28 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.30-rc3 -# Wed May 13 17:22:31 2009 +# Linux kernel version: 2.6.30 +# Thu Jul 2 13:55:24 2009 # # CONFIG_PPC64 is not set # # Processor support # -CONFIG_6xx=y +CONFIG_PPC_BOOK3S_32=y # CONFIG_PPC_85xx is not set # CONFIG_PPC_8xx is not set # CONFIG_40x is not set # CONFIG_44x is not set # CONFIG_E200 is not set CONFIG_PPC_BOOK3S=y +CONFIG_6xx=y CONFIG_PPC_FPU=y # CONFIG_PHYS_64BIT is not set CONFIG_ALTIVEC=y CONFIG_PPC_STD_MMU=y CONFIG_PPC_STD_MMU_32=y # CONFIG_PPC_MM_SLICES is not set +CONFIG_PPC_HAVE_PMU_SUPPORT=y CONFIG_SMP=y CONFIG_NR_CPUS=2 CONFIG_PPC32=y @@ -32,6 +34,7 @@ CONFIG_GENERIC_TIME=y CONFIG_GENERIC_TIME_VSYSCALL=y CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_GENERIC_HARDIRQS=y +CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set CONFIG_IRQ_PER_CPU=y CONFIG_STACKTRACE_SUPPORT=y @@ -41,7 +44,6 @@ CONFIG_RWSEM_XCHGADD_ALGORITHM=y CONFIG_GENERIC_LOCKBREAK=y CONFIG_ARCH_HAS_ILOG2_U32=y CONFIG_GENERIC_HWEIGHT=y -CONFIG_GENERIC_CALIBRATE_DELAY=y CONFIG_GENERIC_FIND_NEXT_BIT=y CONFIG_GENERIC_GPIO=y # CONFIG_ARCH_NO_VIRT_TO_BUS is not set @@ -56,11 +58,13 @@ CONFIG_PPC_UDBG_16550=y CONFIG_GENERIC_TBSYNC=y CONFIG_AUDIT_ARCH=y CONFIG_GENERIC_BUG=y +CONFIG_DTC=y CONFIG_DEFAULT_UIMAGE=y # CONFIG_PPC_DCR_NATIVE is not set # CONFIG_PPC_DCR_MMIO is not set CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" +CONFIG_CONSTRUCTORS=y # # General setup @@ -112,9 +116,7 @@ CONFIG_ANON_INODES=y CONFIG_EMBEDDED=y CONFIG_SYSCTL_SYSCALL=y CONFIG_KALLSYMS=y -# CONFIG_KALLSYMS_ALL is not set # CONFIG_KALLSYMS_EXTRA_PASS is not set -# CONFIG_STRIP_ASM_SYMS is not set CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y @@ -127,8 +129,15 @@ CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y CONFIG_AIO=y +CONFIG_HAVE_PERF_COUNTERS=y + +# +# Performance Counters +# +# CONFIG_PERF_COUNTERS is not set CONFIG_VM_EVENT_COUNTERS=y CONFIG_PCI_QUIRKS=y +# CONFIG_STRIP_ASM_SYMS is not set CONFIG_COMPAT_BRK=y CONFIG_SLAB=y # CONFIG_SLUB is not set @@ -143,6 +152,10 @@ CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_ARCH_TRACEHOOK=y CONFIG_USE_GENERIC_SMP_HELPERS=y + +# +# GCOV-based kernel profiling +# # CONFIG_SLOW_WORK is not set # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y @@ -156,7 +169,7 @@ CONFIG_MODULE_UNLOAD=y # CONFIG_MODULE_SRCVERSION_ALL is not set CONFIG_STOP_MACHINE=y CONFIG_BLOCK=y -# CONFIG_LBD is not set +CONFIG_LBDAF=y # CONFIG_BLK_DEV_BSG is not set # CONFIG_BLK_DEV_INTEGRITY is not set @@ -216,7 +229,7 @@ CONFIG_MPIC=y # # Kernel options # -# CONFIG_HIGHMEM is not set +CONFIG_HIGHMEM=y CONFIG_TICK_ONESHOT=y # CONFIG_NO_HZ is not set CONFIG_HIGH_RES_TIMERS=y @@ -235,6 +248,7 @@ CONFIG_BINFMT_ELF=y # CONFIG_HAVE_AOUT is not set CONFIG_BINFMT_MISC=m # CONFIG_IOMMU_HELPER is not set +# CONFIG_SWIOTLB is not set CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y CONFIG_ARCH_HAS_WALK_MEMORY=y CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y @@ -256,9 +270,9 @@ CONFIG_MIGRATION=y CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y -CONFIG_UNEVICTABLE_LRU=y CONFIG_HAVE_MLOCK=y CONFIG_HAVE_MLOCKED_PAGE_BIT=y +CONFIG_DEFAULT_MMAP_MIN_ADDR=4096 CONFIG_PPC_4K_PAGES=y # CONFIG_PPC_16K_PAGES is not set # CONFIG_PPC_64K_PAGES is not set @@ -285,14 +299,32 @@ CONFIG_PCI_DOMAINS=y CONFIG_PCI_SYSCALL=y CONFIG_PCIEPORTBUS=y CONFIG_PCIEAER=y +# CONFIG_PCIE_ECRC is not set +# CONFIG_PCIEAER_INJECT is not set # CONFIG_PCIEASPM is not set CONFIG_ARCH_SUPPORTS_MSI=y # CONFIG_PCI_MSI is not set # CONFIG_PCI_LEGACY is not set -CONFIG_PCI_DEBUG=y # CONFIG_PCI_STUB is not set # CONFIG_PCI_IOV is not set -# CONFIG_PCCARD is not set +CONFIG_PCCARD=y +# CONFIG_PCMCIA_DEBUG is not set +CONFIG_PCMCIA=y +# CONFIG_PCMCIA_LOAD_CIS is not set +# CONFIG_PCMCIA_IOCTL is not set +# CONFIG_CARDBUS is not set + +# +# PC-card bridges +# +CONFIG_YENTA=y +# CONFIG_YENTA_O2 is not set +# CONFIG_YENTA_RICOH is not set +CONFIG_YENTA_TI=y +# CONFIG_YENTA_TOSHIBA is not set +# CONFIG_PD6729 is not set +# CONFIG_I82092 is not set +CONFIG_PCCARD_NONSTATIC=y # CONFIG_HOTPLUG_PCI is not set # CONFIG_HAS_RAPIDIO is not set @@ -353,8 +385,8 @@ CONFIG_INET_XFRM_TUNNEL=m CONFIG_INET_TUNNEL=m CONFIG_INET_XFRM_MODE_TRANSPORT=y CONFIG_INET_XFRM_MODE_TUNNEL=y -CONFIG_INET_XFRM_MODE_BEET=y -# CONFIG_INET_LRO is not set +# CONFIG_INET_XFRM_MODE_BEET is not set +CONFIG_INET_LRO=y CONFIG_INET_DIAG=y CONFIG_INET_TCP_DIAG=y # CONFIG_TCP_CONG_ADVANCED is not set @@ -380,174 +412,26 @@ CONFIG_IPV6_NDISC_NODETYPE=y CONFIG_IPV6_TUNNEL=m # CONFIG_IPV6_MULTIPLE_TABLES is not set # CONFIG_IPV6_MROUTE is not set -# CONFIG_NETLABEL is not set # CONFIG_NETWORK_SECMARK is not set -CONFIG_NETFILTER=y -# CONFIG_NETFILTER_DEBUG is not set -CONFIG_NETFILTER_ADVANCED=y -CONFIG_BRIDGE_NETFILTER=y - -# -# Core Netfilter Configuration -# -# CONFIG_NETFILTER_NETLINK_QUEUE is not set -# CONFIG_NETFILTER_NETLINK_LOG is not set -# CONFIG_NF_CONNTRACK is not set -# CONFIG_NETFILTER_TPROXY is not set -CONFIG_NETFILTER_XTABLES=m -# CONFIG_NETFILTER_XT_TARGET_CLASSIFY is not set -# CONFIG_NETFILTER_XT_TARGET_DSCP is not set -# CONFIG_NETFILTER_XT_TARGET_HL is not set -# CONFIG_NETFILTER_XT_TARGET_MARK is not set -# CONFIG_NETFILTER_XT_TARGET_NFLOG is not set -# CONFIG_NETFILTER_XT_TARGET_NFQUEUE is not set -# CONFIG_NETFILTER_XT_TARGET_RATEEST is not set -# CONFIG_NETFILTER_XT_TARGET_TRACE is not set -# CONFIG_NETFILTER_XT_TARGET_TCPMSS is not set -# CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP is not set -# CONFIG_NETFILTER_XT_MATCH_COMMENT is not set -# CONFIG_NETFILTER_XT_MATCH_DCCP is not set -# CONFIG_NETFILTER_XT_MATCH_DSCP is not set -# CONFIG_NETFILTER_XT_MATCH_ESP is not set -# CONFIG_NETFILTER_XT_MATCH_HASHLIMIT is not set -CONFIG_NETFILTER_XT_MATCH_HL=m -# CONFIG_NETFILTER_XT_MATCH_IPRANGE is not set -# CONFIG_NETFILTER_XT_MATCH_LENGTH is not set -# CONFIG_NETFILTER_XT_MATCH_LIMIT is not set -# CONFIG_NETFILTER_XT_MATCH_MAC is not set -# CONFIG_NETFILTER_XT_MATCH_MARK is not set -# CONFIG_NETFILTER_XT_MATCH_MULTIPORT is not set -# CONFIG_NETFILTER_XT_MATCH_OWNER is not set -# CONFIG_NETFILTER_XT_MATCH_POLICY is not set -# CONFIG_NETFILTER_XT_MATCH_PHYSDEV is not set -# CONFIG_NETFILTER_XT_MATCH_PKTTYPE is not set -# CONFIG_NETFILTER_XT_MATCH_QUOTA is not set -# CONFIG_NETFILTER_XT_MATCH_RATEEST is not set -# CONFIG_NETFILTER_XT_MATCH_REALM is not set -# CONFIG_NETFILTER_XT_MATCH_RECENT is not set -# CONFIG_NETFILTER_XT_MATCH_SCTP is not set -# CONFIG_NETFILTER_XT_MATCH_STATISTIC is not set -# CONFIG_NETFILTER_XT_MATCH_STRING is not set -# CONFIG_NETFILTER_XT_MATCH_TCPMSS is not set -# CONFIG_NETFILTER_XT_MATCH_TIME is not set -# CONFIG_NETFILTER_XT_MATCH_U32 is not set -# CONFIG_IP_VS is not set - -# -# IP: Netfilter Configuration -# -# CONFIG_NF_DEFRAG_IPV4 is not set -CONFIG_IP_NF_QUEUE=m -CONFIG_IP_NF_IPTABLES=m -CONFIG_IP_NF_MATCH_ADDRTYPE=m -# CONFIG_IP_NF_MATCH_AH is not set -CONFIG_IP_NF_MATCH_ECN=m -CONFIG_IP_NF_MATCH_TTL=m -CONFIG_IP_NF_FILTER=m -CONFIG_IP_NF_TARGET_REJECT=m -CONFIG_IP_NF_TARGET_LOG=m -CONFIG_IP_NF_TARGET_ULOG=m -CONFIG_IP_NF_MANGLE=m -CONFIG_IP_NF_TARGET_ECN=m -# CONFIG_IP_NF_TARGET_TTL is not set -CONFIG_IP_NF_RAW=m -# CONFIG_IP_NF_SECURITY is not set -CONFIG_IP_NF_ARPTABLES=m -CONFIG_IP_NF_ARPFILTER=m -CONFIG_IP_NF_ARP_MANGLE=m - -# -# IPv6: Netfilter Configuration -# -CONFIG_IP6_NF_QUEUE=m -CONFIG_IP6_NF_IPTABLES=m -# CONFIG_IP6_NF_MATCH_AH is not set -CONFIG_IP6_NF_MATCH_EUI64=m -CONFIG_IP6_NF_MATCH_FRAG=m -CONFIG_IP6_NF_MATCH_OPTS=m -CONFIG_IP6_NF_MATCH_HL=m -CONFIG_IP6_NF_MATCH_IPV6HEADER=m -# CONFIG_IP6_NF_MATCH_MH is not set -CONFIG_IP6_NF_MATCH_RT=m -# CONFIG_IP6_NF_TARGET_HL is not set -CONFIG_IP6_NF_TARGET_LOG=m -CONFIG_IP6_NF_FILTER=m -# CONFIG_IP6_NF_TARGET_REJECT is not set -CONFIG_IP6_NF_MANGLE=m -CONFIG_IP6_NF_RAW=m -# CONFIG_IP6_NF_SECURITY is not set -# CONFIG_BRIDGE_NF_EBTABLES is not set +# CONFIG_NETFILTER is not set # CONFIG_IP_DCCP is not set -CONFIG_IP_SCTP=m -# CONFIG_SCTP_DBG_MSG is not set -# CONFIG_SCTP_DBG_OBJCNT is not set -# CONFIG_SCTP_HMAC_NONE is not set -# CONFIG_SCTP_HMAC_SHA1 is not set -CONFIG_SCTP_HMAC_MD5=y -CONFIG_TIPC=m -# CONFIG_TIPC_ADVANCED is not set -# CONFIG_TIPC_DEBUG is not set -CONFIG_ATM=m -CONFIG_ATM_CLIP=m -# CONFIG_ATM_CLIP_NO_ICMP is not set -CONFIG_ATM_LANE=m -CONFIG_ATM_MPOA=m -CONFIG_ATM_BR2684=m -# CONFIG_ATM_BR2684_IPFILTER is not set -CONFIG_STP=m -CONFIG_BRIDGE=m +# CONFIG_IP_SCTP is not set +# CONFIG_TIPC is not set +# CONFIG_ATM is not set +# CONFIG_BRIDGE is not set # CONFIG_NET_DSA is not set -CONFIG_VLAN_8021Q=m -# CONFIG_VLAN_8021Q_GVRP is not set +# CONFIG_VLAN_8021Q is not set # CONFIG_DECNET is not set -CONFIG_LLC=m # CONFIG_LLC2 is not set # CONFIG_IPX is not set # CONFIG_ATALK is not set # CONFIG_X25 is not set # CONFIG_LAPB is not set # CONFIG_ECONET is not set -CONFIG_WAN_ROUTER=m +# CONFIG_WAN_ROUTER is not set # CONFIG_PHONET is not set -CONFIG_NET_SCHED=y - -# -# Queueing/Scheduling -# -CONFIG_NET_SCH_CBQ=m -CONFIG_NET_SCH_HTB=m -CONFIG_NET_SCH_HFSC=m -CONFIG_NET_SCH_ATM=m -CONFIG_NET_SCH_PRIO=m -# CONFIG_NET_SCH_MULTIQ is not set -CONFIG_NET_SCH_RED=m -CONFIG_NET_SCH_SFQ=m -CONFIG_NET_SCH_TEQL=m -CONFIG_NET_SCH_TBF=m -CONFIG_NET_SCH_GRED=m -CONFIG_NET_SCH_DSMARK=m -CONFIG_NET_SCH_NETEM=m -# CONFIG_NET_SCH_DRR is not set - -# -# Classification -# -CONFIG_NET_CLS=y -# CONFIG_NET_CLS_BASIC is not set -CONFIG_NET_CLS_TCINDEX=m -CONFIG_NET_CLS_ROUTE4=m -CONFIG_NET_CLS_ROUTE=y -CONFIG_NET_CLS_FW=m -CONFIG_NET_CLS_U32=m -# CONFIG_CLS_U32_PERF is not set -# CONFIG_CLS_U32_MARK is not set -CONFIG_NET_CLS_RSVP=m -CONFIG_NET_CLS_RSVP6=m -# CONFIG_NET_CLS_FLOW is not set -# CONFIG_NET_EMATCH is not set -# CONFIG_NET_CLS_ACT is not set -# CONFIG_NET_CLS_IND is not set -CONFIG_NET_SCH_FIFO=y +# CONFIG_IEEE802154 is not set +# CONFIG_NET_SCHED is not set # CONFIG_DCB is not set # @@ -560,12 +444,7 @@ CONFIG_NET_PKTGEN=m # CONFIG_BT is not set # CONFIG_AF_RXRPC is not set CONFIG_FIB_RULES=y -CONFIG_WIRELESS=y -# CONFIG_CFG80211 is not set -CONFIG_WIRELESS_OLD_REGULATORY=y -# CONFIG_WIRELESS_EXT is not set -# CONFIG_LIB80211 is not set -# CONFIG_MAC80211 is not set +# CONFIG_WIRELESS is not set # CONFIG_WIMAX is not set # CONFIG_RFKILL is not set # CONFIG_NET_9P is not set @@ -580,9 +459,9 @@ CONFIG_WIRELESS_OLD_REGULATORY=y CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" CONFIG_STANDALONE=y CONFIG_PREVENT_FIRMWARE_BUILD=y -# CONFIG_FW_LOADER is not set -# CONFIG_DEBUG_DRIVER is not set -# CONFIG_DEBUG_DEVRES is not set +CONFIG_FW_LOADER=y +CONFIG_FIRMWARE_IN_KERNEL=y +CONFIG_EXTRA_FIRMWARE="" # CONFIG_SYS_HYPERVISOR is not set # CONFIG_CONNECTOR is not set CONFIG_MTD=y @@ -672,6 +551,7 @@ CONFIG_MTD_PHYSMAP_OF=y CONFIG_OF_DEVICE=y CONFIG_OF_GPIO=y CONFIG_OF_I2C=y +CONFIG_OF_MDIO=y # CONFIG_PARPORT is not set CONFIG_BLK_DEV=y # CONFIG_BLK_DEV_FD is not set @@ -707,9 +587,60 @@ CONFIG_MISC_DEVICES=y # # CONFIG_EEPROM_AT24 is not set # CONFIG_EEPROM_LEGACY is not set +# CONFIG_EEPROM_MAX6875 is not set # CONFIG_EEPROM_93CX6 is not set +# CONFIG_CB710_CORE is not set CONFIG_HAVE_IDE=y -# CONFIG_IDE is not set +CONFIG_IDE=y + +# +# Please see Documentation/ide/ide.txt for help/info on IDE drives +# +# CONFIG_BLK_DEV_IDE_SATA is not set +CONFIG_IDE_GD=y +CONFIG_IDE_GD_ATA=y +# CONFIG_IDE_GD_ATAPI is not set +CONFIG_BLK_DEV_IDECS=y +# CONFIG_BLK_DEV_IDECD is not set +# CONFIG_BLK_DEV_IDETAPE is not set +# CONFIG_IDE_TASK_IOCTL is not set +CONFIG_IDE_PROC_FS=y + +# +# IDE chipset support/bugfixes +# +# CONFIG_BLK_DEV_PLATFORM is not set + +# +# PCI IDE chipsets support +# +# CONFIG_BLK_DEV_GENERIC is not set +# CONFIG_BLK_DEV_OPTI621 is not set +# CONFIG_BLK_DEV_AEC62XX is not set +# CONFIG_BLK_DEV_ALI15X3 is not set +# CONFIG_BLK_DEV_AMD74XX is not set +# CONFIG_BLK_DEV_CMD64X is not set +# CONFIG_BLK_DEV_TRIFLEX is not set +# CONFIG_BLK_DEV_CS5520 is not set +# CONFIG_BLK_DEV_CS5530 is not set +# CONFIG_BLK_DEV_HPT366 is not set +# CONFIG_BLK_DEV_JMICRON is not set +# CONFIG_BLK_DEV_SC1200 is not set +# CONFIG_BLK_DEV_PIIX is not set +# CONFIG_BLK_DEV_IT8172 is not set +# CONFIG_BLK_DEV_IT8213 is not set +# CONFIG_BLK_DEV_IT821X is not set +# CONFIG_BLK_DEV_NS87415 is not set +# CONFIG_BLK_DEV_PDC202XX_OLD is not set +# CONFIG_BLK_DEV_PDC202XX_NEW is not set +# CONFIG_BLK_DEV_SVWKS is not set +# CONFIG_BLK_DEV_SIIMAGE is not set +# CONFIG_BLK_DEV_SL82C105 is not set +# CONFIG_BLK_DEV_SLC90E66 is not set +# CONFIG_BLK_DEV_TRM290 is not set +# CONFIG_BLK_DEV_VIA82CXXX is not set +# CONFIG_BLK_DEV_TC86C001 is not set +# CONFIG_BLK_DEV_IDEDMA is not set # # SCSI device support @@ -731,10 +662,6 @@ CONFIG_BLK_DEV_SR=y # CONFIG_BLK_DEV_SR_VENDOR is not set # CONFIG_CHR_DEV_SG is not set # CONFIG_CHR_DEV_SCH is not set - -# -# Some SCSI devices (e.g. CD jukebox) support multiple LUNs -# # CONFIG_SCSI_MULTI_LUN is not set # CONFIG_SCSI_CONSTANTS is not set # CONFIG_SCSI_LOGGING is not set @@ -751,6 +678,7 @@ CONFIG_SCSI_WAIT_SCAN=m # CONFIG_SCSI_SRP_ATTRS is not set CONFIG_SCSI_LOWLEVEL=y # CONFIG_ISCSI_TCP is not set +# CONFIG_SCSI_BNX2_ISCSI is not set # CONFIG_BLK_DEV_3W_XXXX_RAID is not set # CONFIG_SCSI_3W_9XXX is not set # CONFIG_SCSI_ACARD is not set @@ -759,6 +687,7 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_SCSI_AIC7XXX_OLD is not set # CONFIG_SCSI_AIC79XX is not set # CONFIG_SCSI_AIC94XX is not set +# CONFIG_SCSI_MVSAS is not set # CONFIG_SCSI_DPT_I2O is not set # CONFIG_SCSI_ADVANSYS is not set # CONFIG_SCSI_ARCMSR is not set @@ -778,7 +707,6 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_SCSI_IPS is not set # CONFIG_SCSI_INITIO is not set # CONFIG_SCSI_INIA100 is not set -# CONFIG_SCSI_MVSAS is not set # CONFIG_SCSI_STEX is not set # CONFIG_SCSI_SYM53C8XX_2 is not set # CONFIG_SCSI_IPR is not set @@ -791,6 +719,7 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_SCSI_NSP32 is not set # CONFIG_SCSI_DEBUG is not set # CONFIG_SCSI_SRP is not set +# CONFIG_SCSI_LOWLEVEL_PCMCIA is not set # CONFIG_SCSI_DH is not set # CONFIG_SCSI_OSD_INITIATOR is not set CONFIG_ATA=y @@ -842,6 +771,7 @@ CONFIG_SATA_SIL=y # CONFIG_PATA_NS87415 is not set # CONFIG_PATA_OPTI is not set # CONFIG_PATA_OPTIDMA is not set +# CONFIG_PATA_PCMCIA is not set # CONFIG_PATA_PDC_OLD is not set # CONFIG_PATA_RADISYS is not set # CONFIG_PATA_RZ1000 is not set @@ -862,14 +792,17 @@ CONFIG_SATA_SIL=y # # -# Enable only one of the two stacks, unless you know what you are doing +# You can enable one or both FireWire driver stacks. +# + +# +# See the help texts for more information. # # CONFIG_FIREWIRE is not set # CONFIG_IEEE1394 is not set # CONFIG_I2O is not set # CONFIG_MACINTOSH_DRIVERS is not set CONFIG_NETDEVICES=y -CONFIG_COMPAT_NET_DEV_OPS=y CONFIG_DUMMY=m CONFIG_BONDING=m # CONFIG_MACVLAN is not set @@ -916,6 +849,7 @@ CONFIG_MII=y # CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set # CONFIG_NET_PCI is not set # CONFIG_B44 is not set +# CONFIG_KS8842 is not set # CONFIG_ATL2 is not set CONFIG_NETDEV_1000=y # CONFIG_ACENIC is not set @@ -935,8 +869,10 @@ CONFIG_NETDEV_1000=y # CONFIG_VIA_VELOCITY is not set # CONFIG_TIGON3 is not set # CONFIG_BNX2 is not set +# CONFIG_CNIC is not set CONFIG_FSL_PQ_MDIO=y CONFIG_GIANFAR=y +# CONFIG_MV643XX_ETH is not set # CONFIG_QLA3XXX is not set # CONFIG_ATL1 is not set # CONFIG_ATL1E is not set @@ -963,22 +899,8 @@ CONFIG_GIANFAR=y # CONFIG_USB_PEGASUS is not set # CONFIG_USB_RTL8150 is not set # CONFIG_USB_USBNET is not set +# CONFIG_NET_PCMCIA is not set # CONFIG_WAN is not set -CONFIG_ATM_DRIVERS=y -# CONFIG_ATM_DUMMY is not set -# CONFIG_ATM_TCP is not set -# CONFIG_ATM_LANAI is not set -# CONFIG_ATM_ENI is not set -# CONFIG_ATM_FIRESTREAM is not set -# CONFIG_ATM_ZATM is not set -# CONFIG_ATM_NICSTAR is not set -# CONFIG_ATM_IDT77252 is not set -# CONFIG_ATM_AMBASSADOR is not set -# CONFIG_ATM_HORIZON is not set -# CONFIG_ATM_IA is not set -# CONFIG_ATM_FORE200E is not set -# CONFIG_ATM_HE is not set -# CONFIG_ATM_SOLOS is not set # CONFIG_FDDI is not set # CONFIG_HIPPI is not set CONFIG_PPP=m @@ -990,7 +912,6 @@ CONFIG_PPP_DEFLATE=m CONFIG_PPP_BSDCOMP=m # CONFIG_PPP_MPPE is not set CONFIG_PPPOE=m -CONFIG_PPPOATM=m # CONFIG_PPPOL2TP is not set CONFIG_SLIP=m CONFIG_SLIP_COMPRESSED=y @@ -1010,7 +931,7 @@ CONFIG_NET_POLL_CONTROLLER=y # Input device support # CONFIG_INPUT=y -CONFIG_INPUT_FF_MEMLESS=m +# CONFIG_INPUT_FF_MEMLESS is not set # CONFIG_INPUT_POLLDEV is not set # @@ -1058,6 +979,7 @@ CONFIG_DEVKMEM=y CONFIG_SERIAL_8250=y CONFIG_SERIAL_8250_CONSOLE=y # CONFIG_SERIAL_8250_PCI is not set +# CONFIG_SERIAL_8250_CS is not set CONFIG_SERIAL_8250_NR_UARTS=2 CONFIG_SERIAL_8250_RUNTIME_UARTS=2 # CONFIG_SERIAL_8250_EXTENDED is not set @@ -1080,6 +1002,14 @@ CONFIG_HW_RANDOM=y CONFIG_NVRAM=y # CONFIG_R3964 is not set # CONFIG_APPLICOM is not set + +# +# PCMCIA character devices +# +# CONFIG_SYNCLINK_CS is not set +# CONFIG_CARDMAN_4000 is not set +# CONFIG_CARDMAN_4040 is not set +# CONFIG_IPWIRELESS is not set # CONFIG_RAW_DRIVER is not set # CONFIG_TCG_TPM is not set CONFIG_DEVPORT=y @@ -1143,18 +1073,21 @@ CONFIG_DS1682=y # CONFIG_SENSORS_PCF8574 is not set # CONFIG_PCF8575 is not set # CONFIG_SENSORS_PCA9539 is not set -# CONFIG_SENSORS_MAX6875 is not set # CONFIG_SENSORS_TSL2550 is not set # CONFIG_I2C_DEBUG_CORE is not set # CONFIG_I2C_DEBUG_ALGO is not set # CONFIG_I2C_DEBUG_BUS is not set # CONFIG_I2C_DEBUG_CHIP is not set # CONFIG_SPI is not set + +# +# PPS support +# +# CONFIG_PPS is not set CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y CONFIG_ARCH_REQUIRE_GPIOLIB=y CONFIG_GPIOLIB=y -# CONFIG_DEBUG_GPIO is not set -# CONFIG_GPIO_SYSFS is not set +CONFIG_GPIO_SYSFS=y # # Memory mapped GPIO expanders: @@ -1229,6 +1162,7 @@ CONFIG_SENSORS_LM92=y # CONFIG_SENSORS_SMSC47B397 is not set # CONFIG_SENSORS_ADS7828 is not set # CONFIG_SENSORS_THMC50 is not set +# CONFIG_SENSORS_TMP401 is not set # CONFIG_SENSORS_VIA686A is not set # CONFIG_SENSORS_VT1211 is not set # CONFIG_SENSORS_VT8231 is not set @@ -1284,24 +1218,9 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_MFD_WM8400 is not set # CONFIG_MFD_WM8350_I2C is not set # CONFIG_MFD_PCF50633 is not set +# CONFIG_AB3100_CORE is not set # CONFIG_REGULATOR is not set - -# -# Multimedia devices -# - -# -# Multimedia core support -# -# CONFIG_VIDEO_DEV is not set -# CONFIG_DVB_CORE is not set -# CONFIG_VIDEO_MEDIA is not set - -# -# Multimedia drivers -# -CONFIG_DAB=y -# CONFIG_USB_DABUSB is not set +# CONFIG_MEDIA_SUPPORT is not set # # Graphics support @@ -1346,7 +1265,7 @@ CONFIG_HID_BELKIN=y CONFIG_HID_CHERRY=y CONFIG_HID_CHICONY=y CONFIG_HID_CYPRESS=y -# CONFIG_DRAGONRISE_FF is not set +# CONFIG_HID_DRAGONRISE is not set CONFIG_HID_EZKEY=y # CONFIG_HID_KYE is not set CONFIG_HID_GYRATION=y @@ -1363,10 +1282,11 @@ CONFIG_HID_PETALYNX=y CONFIG_HID_SAMSUNG=y CONFIG_HID_SONY=y CONFIG_HID_SUNPLUS=y -# CONFIG_GREENASIA_FF is not set +# CONFIG_HID_GREENASIA is not set +# CONFIG_HID_SMARTJOYPLUS is not set # CONFIG_HID_TOPSEED is not set -CONFIG_THRUSTMASTER_FF=m -CONFIG_ZEROPLUS_FF=m +# CONFIG_HID_THRUSTMASTER is not set +# CONFIG_HID_ZEROPLUS is not set CONFIG_USB_SUPPORT=y CONFIG_USB_ARCH_HAS_HCD=y CONFIG_USB_ARCH_HAS_OHCI=y @@ -1392,6 +1312,7 @@ CONFIG_USB=y # USB Host Controller Drivers # # CONFIG_USB_C67X00_HCD is not set +# CONFIG_USB_XHCI_HCD is not set CONFIG_USB_EHCI_HCD=y # CONFIG_USB_EHCI_ROOT_HUB_TT is not set # CONFIG_USB_EHCI_TT_NEWSCHED is not set @@ -1475,7 +1396,6 @@ CONFIG_USB_STORAGE=y # CONFIG_USB_IOWARRIOR is not set # CONFIG_USB_ISIGHTFW is not set # CONFIG_USB_VST is not set -# CONFIG_USB_ATM is not set # CONFIG_USB_GADGET is not set # @@ -1521,6 +1441,7 @@ CONFIG_RTC_INTF_DEV=y # CONFIG_RTC_DRV_S35390A is not set # CONFIG_RTC_DRV_FM3130 is not set CONFIG_RTC_DRV_RX8581=y +# CONFIG_RTC_DRV_RX8025 is not set # # SPI RTC drivers @@ -1548,6 +1469,10 @@ CONFIG_RTC_DRV_RX8581=y # CONFIG_DMADEVICES is not set # CONFIG_AUXDISPLAY is not set # CONFIG_UIO is not set + +# +# TI VLYNQ +# # CONFIG_STAGING is not set # @@ -1569,10 +1494,12 @@ CONFIG_FS_MBCACHE=y # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set CONFIG_FS_POSIX_ACL=y -CONFIG_FILE_LOCKING=y # CONFIG_XFS_FS is not set +# CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set # CONFIG_BTRFS_FS is not set +CONFIG_FILE_LOCKING=y +CONFIG_FSNOTIFY=y CONFIG_DNOTIFY=y CONFIG_INOTIFY=y CONFIG_INOTIFY_USER=y @@ -1589,8 +1516,11 @@ CONFIG_INOTIFY_USER=y # # CD-ROM/DVD Filesystems # -# CONFIG_ISO9660_FS is not set -# CONFIG_UDF_FS is not set +CONFIG_ISO9660_FS=y +CONFIG_JOLIET=y +CONFIG_ZISOFS=y +CONFIG_UDF_FS=y +CONFIG_UDF_NLS=y # # DOS/FAT/NT Filesystems @@ -1598,8 +1528,8 @@ CONFIG_INOTIFY_USER=y CONFIG_FAT_FS=y CONFIG_MSDOS_FS=y CONFIG_VFAT_FS=y -CONFIG_FAT_DEFAULT_CODEPAGE=437 -CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" +CONFIG_FAT_DEFAULT_CODEPAGE=850 +CONFIG_FAT_DEFAULT_IOCHARSET="ascii" # CONFIG_NTFS_FS is not set # @@ -1649,6 +1579,7 @@ CONFIG_NFS_FS=y CONFIG_NFS_V3=y # CONFIG_NFS_V3_ACL is not set CONFIG_NFS_V4=y +# CONFIG_NFS_V4_1 is not set CONFIG_ROOT_NFS=y # CONFIG_NFSD is not set CONFIG_LOCKD=y @@ -1723,13 +1654,13 @@ CONFIG_NLS_UTF8=m # CONFIG_BITREVERSE=y CONFIG_GENERIC_FIND_LAST_BIT=y -CONFIG_CRC_CCITT=m +CONFIG_CRC_CCITT=y # CONFIG_CRC16 is not set -# CONFIG_CRC_T10DIF is not set -# CONFIG_CRC_ITU_T is not set +CONFIG_CRC_T10DIF=y +CONFIG_CRC_ITU_T=y CONFIG_CRC32=y # CONFIG_CRC7 is not set -CONFIG_LIBCRC32C=m +CONFIG_LIBCRC32C=y CONFIG_ZLIB_INFLATE=y CONFIG_ZLIB_DEFLATE=y CONFIG_DECOMPRESS_GZIP=y @@ -1738,6 +1669,7 @@ CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y CONFIG_HAVE_LMB=y CONFIG_NLATTR=y +CONFIG_GENERIC_ATOMIC64=y # # Kernel hacking @@ -1750,75 +1682,24 @@ CONFIG_MAGIC_SYSRQ=y # CONFIG_UNUSED_SYMBOLS is not set # CONFIG_DEBUG_FS is not set # CONFIG_HEADERS_CHECK is not set -CONFIG_DEBUG_KERNEL=y -# CONFIG_DEBUG_SHIRQ is not set -CONFIG_DETECT_SOFTLOCKUP=y -# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set -CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0 -CONFIG_DETECT_HUNG_TASK=y -# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set -CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0 -CONFIG_SCHED_DEBUG=y -# CONFIG_SCHEDSTATS is not set -# CONFIG_TIMER_STATS is not set -# CONFIG_DEBUG_OBJECTS is not set -# CONFIG_DEBUG_SLAB is not set -# CONFIG_DEBUG_RT_MUTEXES is not set -# CONFIG_RT_MUTEX_TESTER is not set -# CONFIG_DEBUG_SPINLOCK is not set -# CONFIG_DEBUG_MUTEXES is not set -# CONFIG_DEBUG_SPINLOCK_SLEEP is not set -# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set -# CONFIG_DEBUG_KOBJECT is not set +# CONFIG_DEBUG_KERNEL is not set # CONFIG_DEBUG_BUGVERBOSE is not set -CONFIG_DEBUG_INFO=y -# CONFIG_DEBUG_VM is not set -# CONFIG_DEBUG_WRITECOUNT is not set # CONFIG_DEBUG_MEMORY_INIT is not set -# CONFIG_DEBUG_LIST is not set -# CONFIG_DEBUG_SG is not set -# CONFIG_DEBUG_NOTIFIERS is not set -# CONFIG_BOOT_PRINTK_DELAY is not set -# CONFIG_RCU_TORTURE_TEST is not set # CONFIG_RCU_CPU_STALL_DETECTOR is not set -# CONFIG_BACKTRACE_SELF_TEST is not set -# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set -# CONFIG_FAULT_INJECTION is not set # CONFIG_LATENCYTOP is not set CONFIG_SYSCTL_SYSCALL_CHECK=y -# CONFIG_DEBUG_PAGEALLOC is not set CONFIG_HAVE_FUNCTION_TRACER=y CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y CONFIG_HAVE_DYNAMIC_FTRACE=y CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y CONFIG_TRACING_SUPPORT=y - -# -# Tracers -# -# CONFIG_FUNCTION_TRACER is not set -# CONFIG_PREEMPT_TRACER is not set -# CONFIG_SCHED_TRACER is not set -# CONFIG_CONTEXT_SWITCH_TRACER is not set -# CONFIG_EVENT_TRACER is not set -# CONFIG_BOOT_TRACER is not set -# CONFIG_TRACE_BRANCH_PROFILING is not set -# CONFIG_STACK_TRACER is not set -# CONFIG_KMEMTRACE is not set -# CONFIG_WORKQUEUE_TRACER is not set -# CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_FTRACE is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y -# CONFIG_KGDB is not set +# CONFIG_PPC_DISABLE_WERROR is not set +CONFIG_PPC_WERROR=y CONFIG_PRINT_STACK_DEPTH=64 -# CONFIG_DEBUG_STACKOVERFLOW is not set -# CONFIG_DEBUG_STACK_USAGE is not set -# CONFIG_CODE_PATCHING_SELFTEST is not set -# CONFIG_FTR_FIXUP_SELFTEST is not set -# CONFIG_MSI_BITMAP_SELFTEST is not set -# CONFIG_XMON is not set # CONFIG_IRQSTACKS is not set -# CONFIG_BDI_SWITCH is not set # CONFIG_BOOTX_TEXT is not set # CONFIG_PPC_EARLY_DEBUG is not set @@ -1826,15 +1707,9 @@ CONFIG_PRINT_STACK_DEPTH=64 # Security options # # CONFIG_KEYS is not set -CONFIG_SECURITY=y +# CONFIG_SECURITY is not set # CONFIG_SECURITYFS is not set -CONFIG_SECURITY_NETWORK=y -# CONFIG_SECURITY_NETWORK_XFRM is not set -# CONFIG_SECURITY_PATH is not set # CONFIG_SECURITY_FILE_CAPABILITIES is not set -# CONFIG_SECURITY_ROOTPLUG is not set -CONFIG_SECURITY_DEFAULT_MMAP_MIN_ADDR=0 -# CONFIG_SECURITY_TOMOYO is not set CONFIG_CRYPTO=y # @@ -1854,11 +1729,11 @@ CONFIG_CRYPTO_PCOMP=y CONFIG_CRYPTO_MANAGER=y CONFIG_CRYPTO_MANAGER2=y # CONFIG_CRYPTO_GF128MUL is not set -CONFIG_CRYPTO_NULL=m +# CONFIG_CRYPTO_NULL is not set CONFIG_CRYPTO_WORKQUEUE=y # CONFIG_CRYPTO_CRYPTD is not set CONFIG_CRYPTO_AUTHENC=m -CONFIG_CRYPTO_TEST=m +# CONFIG_CRYPTO_TEST is not set # # Authenticated Encryption with Associated Data @@ -1873,53 +1748,52 @@ CONFIG_CRYPTO_TEST=m CONFIG_CRYPTO_CBC=y # CONFIG_CRYPTO_CTR is not set # CONFIG_CRYPTO_CTS is not set -CONFIG_CRYPTO_ECB=m +# CONFIG_CRYPTO_ECB is not set # CONFIG_CRYPTO_LRW is not set -CONFIG_CRYPTO_PCBC=m +# CONFIG_CRYPTO_PCBC is not set # CONFIG_CRYPTO_XTS is not set # # Hash modes # -CONFIG_CRYPTO_HMAC=y +CONFIG_CRYPTO_HMAC=m # CONFIG_CRYPTO_XCBC is not set # # Digest # -CONFIG_CRYPTO_CRC32C=m -CONFIG_CRYPTO_MD4=m +CONFIG_CRYPTO_CRC32C=y +# CONFIG_CRYPTO_MD4 is not set CONFIG_CRYPTO_MD5=y -CONFIG_CRYPTO_MICHAEL_MIC=m +# CONFIG_CRYPTO_MICHAEL_MIC is not set # CONFIG_CRYPTO_RMD128 is not set # CONFIG_CRYPTO_RMD160 is not set # CONFIG_CRYPTO_RMD256 is not set # CONFIG_CRYPTO_RMD320 is not set CONFIG_CRYPTO_SHA1=m -CONFIG_CRYPTO_SHA256=m -CONFIG_CRYPTO_SHA512=m +# CONFIG_CRYPTO_SHA256 is not set +# CONFIG_CRYPTO_SHA512 is not set # CONFIG_CRYPTO_TGR192 is not set -CONFIG_CRYPTO_WP512=m +# CONFIG_CRYPTO_WP512 is not set # # Ciphers # -CONFIG_CRYPTO_AES=m -CONFIG_CRYPTO_ANUBIS=m -CONFIG_CRYPTO_ARC4=m -CONFIG_CRYPTO_BLOWFISH=m +# CONFIG_CRYPTO_AES is not set +# CONFIG_CRYPTO_ANUBIS is not set +# CONFIG_CRYPTO_ARC4 is not set +# CONFIG_CRYPTO_BLOWFISH is not set # CONFIG_CRYPTO_CAMELLIA is not set -CONFIG_CRYPTO_CAST5=m -CONFIG_CRYPTO_CAST6=m +# CONFIG_CRYPTO_CAST5 is not set +# CONFIG_CRYPTO_CAST6 is not set CONFIG_CRYPTO_DES=y # CONFIG_CRYPTO_FCRYPT is not set -CONFIG_CRYPTO_KHAZAD=m +# CONFIG_CRYPTO_KHAZAD is not set # CONFIG_CRYPTO_SALSA20 is not set # CONFIG_CRYPTO_SEED is not set -CONFIG_CRYPTO_SERPENT=m -CONFIG_CRYPTO_TEA=m -CONFIG_CRYPTO_TWOFISH=m -CONFIG_CRYPTO_TWOFISH_COMMON=m +# CONFIG_CRYPTO_SERPENT is not set +# CONFIG_CRYPTO_TEA is not set +# CONFIG_CRYPTO_TWOFISH is not set # # Compression -- cgit v1.2.3 From 083e268c8b78606658f2e4524168ff45825d879e Mon Sep 17 00:00:00 2001 From: Martyn Welch Date: Thu, 2 Jul 2009 15:18:44 +0100 Subject: powerpc/86xx: Update GE Fanuc sbc310 default configuration General update of defconfig including the following notable changes: - Enable Highmem support. - Support for PCMCIA based daughter card. Signed-off-by: Martyn Welch Signed-off-by: Kumar Gala --- arch/powerpc/configs/86xx/gef_sbc310_defconfig | 213 ++++++++++++++++++------- 1 file changed, 154 insertions(+), 59 deletions(-) diff --git a/arch/powerpc/configs/86xx/gef_sbc310_defconfig b/arch/powerpc/configs/86xx/gef_sbc310_defconfig index a66910e6334..f2362e5bf06 100644 --- a/arch/powerpc/configs/86xx/gef_sbc310_defconfig +++ b/arch/powerpc/configs/86xx/gef_sbc310_defconfig @@ -1,26 +1,28 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.30-rc3 -# Wed May 13 17:22:29 2009 +# Linux kernel version: 2.6.30 +# Thu Jul 2 14:10:12 2009 # # CONFIG_PPC64 is not set # # Processor support # -CONFIG_6xx=y +CONFIG_PPC_BOOK3S_32=y # CONFIG_PPC_85xx is not set # CONFIG_PPC_8xx is not set # CONFIG_40x is not set # CONFIG_44x is not set # CONFIG_E200 is not set CONFIG_PPC_BOOK3S=y +CONFIG_6xx=y CONFIG_PPC_FPU=y # CONFIG_PHYS_64BIT is not set CONFIG_ALTIVEC=y CONFIG_PPC_STD_MMU=y CONFIG_PPC_STD_MMU_32=y # CONFIG_PPC_MM_SLICES is not set +CONFIG_PPC_HAVE_PMU_SUPPORT=y CONFIG_SMP=y CONFIG_NR_CPUS=2 CONFIG_PPC32=y @@ -32,6 +34,7 @@ CONFIG_GENERIC_TIME=y CONFIG_GENERIC_TIME_VSYSCALL=y CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_GENERIC_HARDIRQS=y +CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set CONFIG_IRQ_PER_CPU=y CONFIG_STACKTRACE_SUPPORT=y @@ -41,7 +44,6 @@ CONFIG_RWSEM_XCHGADD_ALGORITHM=y CONFIG_GENERIC_LOCKBREAK=y CONFIG_ARCH_HAS_ILOG2_U32=y CONFIG_GENERIC_HWEIGHT=y -CONFIG_GENERIC_CALIBRATE_DELAY=y CONFIG_GENERIC_FIND_NEXT_BIT=y CONFIG_GENERIC_GPIO=y # CONFIG_ARCH_NO_VIRT_TO_BUS is not set @@ -56,11 +58,13 @@ CONFIG_PPC_UDBG_16550=y CONFIG_GENERIC_TBSYNC=y CONFIG_AUDIT_ARCH=y CONFIG_GENERIC_BUG=y +CONFIG_DTC=y CONFIG_DEFAULT_UIMAGE=y # CONFIG_PPC_DCR_NATIVE is not set # CONFIG_PPC_DCR_MMIO is not set CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" +CONFIG_CONSTRUCTORS=y # # General setup @@ -91,7 +95,11 @@ CONFIG_CLASSIC_RCU=y CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y CONFIG_LOG_BUF_SHIFT=14 -# CONFIG_GROUP_SCHED is not set +CONFIG_GROUP_SCHED=y +CONFIG_FAIR_GROUP_SCHED=y +# CONFIG_RT_GROUP_SCHED is not set +CONFIG_USER_SCHED=y +# CONFIG_CGROUP_SCHED is not set # CONFIG_CGROUPS is not set CONFIG_SYSFS_DEPRECATED=y CONFIG_SYSFS_DEPRECATED_V2=y @@ -109,7 +117,6 @@ CONFIG_EMBEDDED=y CONFIG_SYSCTL_SYSCALL=y CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_EXTRA_PASS is not set -# CONFIG_STRIP_ASM_SYMS is not set CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y @@ -122,8 +129,15 @@ CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y CONFIG_AIO=y +CONFIG_HAVE_PERF_COUNTERS=y + +# +# Performance Counters +# +# CONFIG_PERF_COUNTERS is not set CONFIG_VM_EVENT_COUNTERS=y CONFIG_PCI_QUIRKS=y +# CONFIG_STRIP_ASM_SYMS is not set CONFIG_COMPAT_BRK=y CONFIG_SLAB=y # CONFIG_SLUB is not set @@ -138,6 +152,10 @@ CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_ARCH_TRACEHOOK=y CONFIG_USE_GENERIC_SMP_HELPERS=y + +# +# GCOV-based kernel profiling +# # CONFIG_SLOW_WORK is not set # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y @@ -151,7 +169,7 @@ CONFIG_MODULE_UNLOAD=y # CONFIG_MODULE_SRCVERSION_ALL is not set CONFIG_STOP_MACHINE=y CONFIG_BLOCK=y -# CONFIG_LBD is not set +CONFIG_LBDAF=y # CONFIG_BLK_DEV_BSG is not set # CONFIG_BLK_DEV_INTEGRITY is not set @@ -168,7 +186,6 @@ CONFIG_DEFAULT_CFQ=y # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="cfq" # CONFIG_FREEZER is not set -CONFIG_PPC_MSI_BITMAP=y # # Platform support @@ -212,7 +229,7 @@ CONFIG_MPIC=y # # Kernel options # -# CONFIG_HIGHMEM is not set +CONFIG_HIGHMEM=y CONFIG_TICK_ONESHOT=y # CONFIG_NO_HZ is not set CONFIG_HIGH_RES_TIMERS=y @@ -231,6 +248,7 @@ CONFIG_BINFMT_ELF=y # CONFIG_HAVE_AOUT is not set CONFIG_BINFMT_MISC=y # CONFIG_IOMMU_HELPER is not set +# CONFIG_SWIOTLB is not set CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y CONFIG_ARCH_HAS_WALK_MEMORY=y CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y @@ -252,9 +270,9 @@ CONFIG_MIGRATION=y CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y -CONFIG_UNEVICTABLE_LRU=y CONFIG_HAVE_MLOCK=y CONFIG_HAVE_MLOCKED_PAGE_BIT=y +CONFIG_DEFAULT_MMAP_MIN_ADDR=4096 CONFIG_PPC_4K_PAGES=y # CONFIG_PPC_16K_PAGES is not set # CONFIG_PPC_64K_PAGES is not set @@ -281,13 +299,32 @@ CONFIG_PCI_DOMAINS=y CONFIG_PCI_SYSCALL=y CONFIG_PCIEPORTBUS=y CONFIG_PCIEAER=y +# CONFIG_PCIE_ECRC is not set +# CONFIG_PCIEAER_INJECT is not set # CONFIG_PCIEASPM is not set CONFIG_ARCH_SUPPORTS_MSI=y -CONFIG_PCI_MSI=y +# CONFIG_PCI_MSI is not set # CONFIG_PCI_LEGACY is not set # CONFIG_PCI_STUB is not set # CONFIG_PCI_IOV is not set -# CONFIG_PCCARD is not set +CONFIG_PCCARD=y +# CONFIG_PCMCIA_DEBUG is not set +CONFIG_PCMCIA=y +# CONFIG_PCMCIA_LOAD_CIS is not set +# CONFIG_PCMCIA_IOCTL is not set +# CONFIG_CARDBUS is not set + +# +# PC-card bridges +# +CONFIG_YENTA=y +# CONFIG_YENTA_O2 is not set +# CONFIG_YENTA_RICOH is not set +CONFIG_YENTA_TI=y +# CONFIG_YENTA_TOSHIBA is not set +# CONFIG_PD6729 is not set +# CONFIG_I82092 is not set +CONFIG_PCCARD_NONSTATIC=y # CONFIG_HOTPLUG_PCI is not set # CONFIG_HAS_RAPIDIO is not set @@ -393,6 +430,7 @@ CONFIG_IPV6_TUNNEL=m # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set # CONFIG_PHONET is not set +# CONFIG_IEEE802154 is not set # CONFIG_NET_SCHED is not set # CONFIG_DCB is not set @@ -421,7 +459,9 @@ CONFIG_FIB_RULES=y CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" CONFIG_STANDALONE=y CONFIG_PREVENT_FIRMWARE_BUILD=y -# CONFIG_FW_LOADER is not set +CONFIG_FW_LOADER=y +CONFIG_FIRMWARE_IN_KERNEL=y +CONFIG_EXTRA_FIRMWARE="" # CONFIG_SYS_HYPERVISOR is not set # CONFIG_CONNECTOR is not set CONFIG_MTD=y @@ -511,6 +551,7 @@ CONFIG_MTD_PHYSMAP_OF=y CONFIG_OF_DEVICE=y CONFIG_OF_GPIO=y CONFIG_OF_I2C=y +CONFIG_OF_MDIO=y # CONFIG_PARPORT is not set CONFIG_BLK_DEV=y # CONFIG_BLK_DEV_FD is not set @@ -546,9 +587,60 @@ CONFIG_MISC_DEVICES=y # # CONFIG_EEPROM_AT24 is not set # CONFIG_EEPROM_LEGACY is not set +# CONFIG_EEPROM_MAX6875 is not set # CONFIG_EEPROM_93CX6 is not set +# CONFIG_CB710_CORE is not set CONFIG_HAVE_IDE=y -# CONFIG_IDE is not set +CONFIG_IDE=y + +# +# Please see Documentation/ide/ide.txt for help/info on IDE drives +# +# CONFIG_BLK_DEV_IDE_SATA is not set +CONFIG_IDE_GD=y +CONFIG_IDE_GD_ATA=y +# CONFIG_IDE_GD_ATAPI is not set +CONFIG_BLK_DEV_IDECS=y +# CONFIG_BLK_DEV_IDECD is not set +# CONFIG_BLK_DEV_IDETAPE is not set +# CONFIG_IDE_TASK_IOCTL is not set +CONFIG_IDE_PROC_FS=y + +# +# IDE chipset support/bugfixes +# +# CONFIG_BLK_DEV_PLATFORM is not set + +# +# PCI IDE chipsets support +# +# CONFIG_BLK_DEV_GENERIC is not set +# CONFIG_BLK_DEV_OPTI621 is not set +# CONFIG_BLK_DEV_AEC62XX is not set +# CONFIG_BLK_DEV_ALI15X3 is not set +# CONFIG_BLK_DEV_AMD74XX is not set +# CONFIG_BLK_DEV_CMD64X is not set +# CONFIG_BLK_DEV_TRIFLEX is not set +# CONFIG_BLK_DEV_CS5520 is not set +# CONFIG_BLK_DEV_CS5530 is not set +# CONFIG_BLK_DEV_HPT366 is not set +# CONFIG_BLK_DEV_JMICRON is not set +# CONFIG_BLK_DEV_SC1200 is not set +# CONFIG_BLK_DEV_PIIX is not set +# CONFIG_BLK_DEV_IT8172 is not set +# CONFIG_BLK_DEV_IT8213 is not set +# CONFIG_BLK_DEV_IT821X is not set +# CONFIG_BLK_DEV_NS87415 is not set +# CONFIG_BLK_DEV_PDC202XX_OLD is not set +# CONFIG_BLK_DEV_PDC202XX_NEW is not set +# CONFIG_BLK_DEV_SVWKS is not set +# CONFIG_BLK_DEV_SIIMAGE is not set +# CONFIG_BLK_DEV_SL82C105 is not set +# CONFIG_BLK_DEV_SLC90E66 is not set +# CONFIG_BLK_DEV_TRM290 is not set +# CONFIG_BLK_DEV_VIA82CXXX is not set +# CONFIG_BLK_DEV_TC86C001 is not set +# CONFIG_BLK_DEV_IDEDMA is not set # # SCSI device support @@ -570,10 +662,6 @@ CONFIG_BLK_DEV_SR=y # CONFIG_BLK_DEV_SR_VENDOR is not set # CONFIG_CHR_DEV_SG is not set # CONFIG_CHR_DEV_SCH is not set - -# -# Some SCSI devices (e.g. CD jukebox) support multiple LUNs -# # CONFIG_SCSI_MULTI_LUN is not set # CONFIG_SCSI_CONSTANTS is not set # CONFIG_SCSI_LOGGING is not set @@ -590,6 +678,7 @@ CONFIG_SCSI_WAIT_SCAN=m # CONFIG_SCSI_SRP_ATTRS is not set CONFIG_SCSI_LOWLEVEL=y # CONFIG_ISCSI_TCP is not set +# CONFIG_SCSI_BNX2_ISCSI is not set # CONFIG_BLK_DEV_3W_XXXX_RAID is not set # CONFIG_SCSI_3W_9XXX is not set # CONFIG_SCSI_ACARD is not set @@ -598,6 +687,7 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_SCSI_AIC7XXX_OLD is not set # CONFIG_SCSI_AIC79XX is not set # CONFIG_SCSI_AIC94XX is not set +# CONFIG_SCSI_MVSAS is not set # CONFIG_SCSI_DPT_I2O is not set # CONFIG_SCSI_ADVANSYS is not set # CONFIG_SCSI_ARCMSR is not set @@ -617,7 +707,6 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_SCSI_IPS is not set # CONFIG_SCSI_INITIO is not set # CONFIG_SCSI_INIA100 is not set -# CONFIG_SCSI_MVSAS is not set # CONFIG_SCSI_STEX is not set # CONFIG_SCSI_SYM53C8XX_2 is not set # CONFIG_SCSI_IPR is not set @@ -630,6 +719,7 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_SCSI_NSP32 is not set # CONFIG_SCSI_DEBUG is not set # CONFIG_SCSI_SRP is not set +# CONFIG_SCSI_LOWLEVEL_PCMCIA is not set # CONFIG_SCSI_DH is not set # CONFIG_SCSI_OSD_INITIATOR is not set CONFIG_ATA=y @@ -647,14 +737,17 @@ CONFIG_SATA_SIL24=y # # -# Enable only one of the two stacks, unless you know what you are doing +# You can enable one or both FireWire driver stacks. +# + +# +# See the help texts for more information. # # CONFIG_FIREWIRE is not set # CONFIG_IEEE1394 is not set # CONFIG_I2O is not set # CONFIG_MACINTOSH_DRIVERS is not set CONFIG_NETDEVICES=y -CONFIG_COMPAT_NET_DEV_OPS=y CONFIG_DUMMY=m CONFIG_BONDING=m # CONFIG_MACVLAN is not set @@ -701,6 +794,7 @@ CONFIG_MII=y # CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set # CONFIG_NET_PCI is not set # CONFIG_B44 is not set +# CONFIG_KS8842 is not set # CONFIG_ATL2 is not set CONFIG_NETDEV_1000=y # CONFIG_ACENIC is not set @@ -720,8 +814,10 @@ CONFIG_NETDEV_1000=y # CONFIG_VIA_VELOCITY is not set # CONFIG_TIGON3 is not set # CONFIG_BNX2 is not set +# CONFIG_CNIC is not set CONFIG_FSL_PQ_MDIO=y CONFIG_GIANFAR=y +# CONFIG_MV643XX_ETH is not set # CONFIG_QLA3XXX is not set # CONFIG_ATL1 is not set # CONFIG_ATL1E is not set @@ -748,6 +844,7 @@ CONFIG_GIANFAR=y # CONFIG_USB_PEGASUS is not set # CONFIG_USB_RTL8150 is not set # CONFIG_USB_USBNET is not set +# CONFIG_NET_PCMCIA is not set # CONFIG_WAN is not set # CONFIG_FDDI is not set # CONFIG_HIPPI is not set @@ -827,6 +924,7 @@ CONFIG_DEVKMEM=y CONFIG_SERIAL_8250=y CONFIG_SERIAL_8250_CONSOLE=y # CONFIG_SERIAL_8250_PCI is not set +# CONFIG_SERIAL_8250_CS is not set CONFIG_SERIAL_8250_NR_UARTS=2 CONFIG_SERIAL_8250_RUNTIME_UARTS=2 # CONFIG_SERIAL_8250_EXTENDED is not set @@ -849,6 +947,14 @@ CONFIG_HW_RANDOM=y CONFIG_NVRAM=y # CONFIG_R3964 is not set # CONFIG_APPLICOM is not set + +# +# PCMCIA character devices +# +# CONFIG_SYNCLINK_CS is not set +# CONFIG_CARDMAN_4000 is not set +# CONFIG_CARDMAN_4040 is not set +# CONFIG_IPWIRELESS is not set # CONFIG_RAW_DRIVER is not set # CONFIG_TCG_TPM is not set CONFIG_DEVPORT=y @@ -912,13 +1018,17 @@ CONFIG_DS1682=y # CONFIG_SENSORS_PCF8574 is not set # CONFIG_PCF8575 is not set # CONFIG_SENSORS_PCA9539 is not set -# CONFIG_SENSORS_MAX6875 is not set # CONFIG_SENSORS_TSL2550 is not set # CONFIG_I2C_DEBUG_CORE is not set # CONFIG_I2C_DEBUG_ALGO is not set # CONFIG_I2C_DEBUG_BUS is not set # CONFIG_I2C_DEBUG_CHIP is not set # CONFIG_SPI is not set + +# +# PPS support +# +# CONFIG_PPS is not set CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y CONFIG_ARCH_REQUIRE_GPIOLIB=y CONFIG_GPIOLIB=y @@ -997,6 +1107,7 @@ CONFIG_SENSORS_LM92=y # CONFIG_SENSORS_SMSC47B397 is not set # CONFIG_SENSORS_ADS7828 is not set # CONFIG_SENSORS_THMC50 is not set +# CONFIG_SENSORS_TMP401 is not set # CONFIG_SENSORS_VIA686A is not set # CONFIG_SENSORS_VT1211 is not set # CONFIG_SENSORS_VT8231 is not set @@ -1052,24 +1163,9 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_MFD_WM8400 is not set # CONFIG_MFD_WM8350_I2C is not set # CONFIG_MFD_PCF50633 is not set +# CONFIG_AB3100_CORE is not set # CONFIG_REGULATOR is not set - -# -# Multimedia devices -# - -# -# Multimedia core support -# -# CONFIG_VIDEO_DEV is not set -# CONFIG_DVB_CORE is not set -# CONFIG_VIDEO_MEDIA is not set - -# -# Multimedia drivers -# -CONFIG_DAB=y -# CONFIG_USB_DABUSB is not set +# CONFIG_MEDIA_SUPPORT is not set # # Graphics support @@ -1114,7 +1210,7 @@ CONFIG_HID_BELKIN=y CONFIG_HID_CHERRY=y CONFIG_HID_CHICONY=y CONFIG_HID_CYPRESS=y -# CONFIG_DRAGONRISE_FF is not set +# CONFIG_HID_DRAGONRISE is not set CONFIG_HID_EZKEY=y # CONFIG_HID_KYE is not set CONFIG_HID_GYRATION=y @@ -1131,10 +1227,11 @@ CONFIG_HID_PETALYNX=y CONFIG_HID_SAMSUNG=y CONFIG_HID_SONY=y CONFIG_HID_SUNPLUS=y -# CONFIG_GREENASIA_FF is not set +# CONFIG_HID_GREENASIA is not set +# CONFIG_HID_SMARTJOYPLUS is not set # CONFIG_HID_TOPSEED is not set -# CONFIG_THRUSTMASTER_FF is not set -# CONFIG_ZEROPLUS_FF is not set +# CONFIG_HID_THRUSTMASTER is not set +# CONFIG_HID_ZEROPLUS is not set CONFIG_USB_SUPPORT=y CONFIG_USB_ARCH_HAS_HCD=y CONFIG_USB_ARCH_HAS_OHCI=y @@ -1160,6 +1257,7 @@ CONFIG_USB=y # USB Host Controller Drivers # # CONFIG_USB_C67X00_HCD is not set +# CONFIG_USB_XHCI_HCD is not set CONFIG_USB_EHCI_HCD=y # CONFIG_USB_EHCI_ROOT_HUB_TT is not set # CONFIG_USB_EHCI_TT_NEWSCHED is not set @@ -1288,6 +1386,7 @@ CONFIG_RTC_INTF_DEV=y # CONFIG_RTC_DRV_S35390A is not set # CONFIG_RTC_DRV_FM3130 is not set CONFIG_RTC_DRV_RX8581=y +# CONFIG_RTC_DRV_RX8025 is not set # # SPI RTC drivers @@ -1315,6 +1414,10 @@ CONFIG_RTC_DRV_RX8581=y # CONFIG_DMADEVICES is not set # CONFIG_AUXDISPLAY is not set # CONFIG_UIO is not set + +# +# TI VLYNQ +# # CONFIG_STAGING is not set # @@ -1336,10 +1439,12 @@ CONFIG_FS_MBCACHE=y # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set CONFIG_FS_POSIX_ACL=y -CONFIG_FILE_LOCKING=y # CONFIG_XFS_FS is not set +# CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set # CONFIG_BTRFS_FS is not set +CONFIG_FILE_LOCKING=y +CONFIG_FSNOTIFY=y CONFIG_DNOTIFY=y CONFIG_INOTIFY=y CONFIG_INOTIFY_USER=y @@ -1419,6 +1524,7 @@ CONFIG_NFS_FS=y CONFIG_NFS_V3=y # CONFIG_NFS_V3_ACL is not set CONFIG_NFS_V4=y +# CONFIG_NFS_V4_1 is not set CONFIG_ROOT_NFS=y # CONFIG_NFSD is not set CONFIG_LOCKD=y @@ -1508,6 +1614,7 @@ CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y CONFIG_HAVE_LMB=y CONFIG_NLATTR=y +CONFIG_GENERIC_ATOMIC64=y # # Kernel hacking @@ -1531,23 +1638,11 @@ CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y CONFIG_HAVE_DYNAMIC_FTRACE=y CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y CONFIG_TRACING_SUPPORT=y - -# -# Tracers -# -# CONFIG_FUNCTION_TRACER is not set -# CONFIG_PREEMPT_TRACER is not set -# CONFIG_SCHED_TRACER is not set -# CONFIG_CONTEXT_SWITCH_TRACER is not set -# CONFIG_EVENT_TRACER is not set -# CONFIG_BOOT_TRACER is not set -# CONFIG_TRACE_BRANCH_PROFILING is not set -# CONFIG_STACK_TRACER is not set -# CONFIG_KMEMTRACE is not set -# CONFIG_WORKQUEUE_TRACER is not set -# CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_FTRACE is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y +# CONFIG_PPC_DISABLE_WERROR is not set +CONFIG_PPC_WERROR=y CONFIG_PRINT_STACK_DEPTH=64 # CONFIG_IRQSTACKS is not set # CONFIG_BOOTX_TEXT is not set -- cgit v1.2.3 From 34466c5be4dd1490acf98e6d2ff8f3728d8ca5c1 Mon Sep 17 00:00:00 2001 From: Kumar Gala Date: Wed, 29 Jul 2009 23:34:01 -0500 Subject: powerpc: Update defconfigs for embedded 6xx/7xxx, 8xx, 8{3,5,6}xxx Signed-off-by: Kumar Gala --- arch/powerpc/configs/83xx/asp8347_defconfig | 106 +++++++----- arch/powerpc/configs/83xx/kmeter1_defconfig | 176 +++++++++++++------- arch/powerpc/configs/83xx/mpc8313_rdb_defconfig | 168 +++++++++++++------ arch/powerpc/configs/83xx/mpc8315_rdb_defconfig | 168 +++++++++++++------ arch/powerpc/configs/83xx/mpc832x_mds_defconfig | 111 +++++++------ arch/powerpc/configs/83xx/mpc832x_rdb_defconfig | 120 ++++++++------ arch/powerpc/configs/83xx/mpc834x_itx_defconfig | 114 +++++++------ arch/powerpc/configs/83xx/mpc834x_itxgp_defconfig | 114 +++++++------ arch/powerpc/configs/83xx/mpc834x_mds_defconfig | 104 +++++++----- arch/powerpc/configs/83xx/mpc836x_mds_defconfig | 111 +++++++------ arch/powerpc/configs/83xx/mpc836x_rdk_defconfig | 104 +++++++----- arch/powerpc/configs/83xx/mpc837x_mds_defconfig | 110 ++++++------ arch/powerpc/configs/83xx/mpc837x_rdb_defconfig | 162 ++++++++++++------ arch/powerpc/configs/83xx/sbc834x_defconfig | 103 +++++++----- arch/powerpc/configs/85xx/ksi8560_defconfig | 93 +++++++---- arch/powerpc/configs/85xx/mpc8540_ads_defconfig | 91 ++++++---- arch/powerpc/configs/85xx/mpc8560_ads_defconfig | 99 +++++++---- arch/powerpc/configs/85xx/mpc85xx_cds_defconfig | 99 +++++++---- arch/powerpc/configs/85xx/sbc8548_defconfig | 96 ++++++----- arch/powerpc/configs/85xx/sbc8560_defconfig | 91 ++++++---- arch/powerpc/configs/85xx/socrates_defconfig | 165 ++++++++++++------ arch/powerpc/configs/85xx/stx_gp3_defconfig | 119 ++++++++----- arch/powerpc/configs/85xx/tqm8540_defconfig | 100 ++++++----- arch/powerpc/configs/85xx/tqm8541_defconfig | 101 ++++++----- arch/powerpc/configs/85xx/tqm8548_defconfig | 100 +++++++---- arch/powerpc/configs/85xx/tqm8555_defconfig | 101 ++++++----- arch/powerpc/configs/85xx/tqm8560_defconfig | 101 ++++++----- arch/powerpc/configs/85xx/xes_mpc85xx_defconfig | 118 +++++++------ arch/powerpc/configs/86xx/gef_ppc9a_defconfig | 7 +- arch/powerpc/configs/86xx/gef_sbc310_defconfig | 7 +- arch/powerpc/configs/86xx/gef_sbc610_defconfig | 130 +++++++++------ arch/powerpc/configs/86xx/mpc8610_hpcd_defconfig | 118 ++++++++----- arch/powerpc/configs/86xx/mpc8641_hpcn_defconfig | 186 ++++++++++----------- arch/powerpc/configs/86xx/sbc8641d_defconfig | 112 ++++++++----- arch/powerpc/configs/adder875_defconfig | 97 +++++++---- arch/powerpc/configs/c2k_defconfig | 121 ++++++++------ arch/powerpc/configs/ep8248e_defconfig | 97 +++++++---- arch/powerpc/configs/ep88xc_defconfig | 91 ++++++---- arch/powerpc/configs/linkstation_defconfig | 116 ++++++++----- arch/powerpc/configs/mgcoge_defconfig | 97 +++++++---- arch/powerpc/configs/mgsuvd_defconfig | 89 +++++----- arch/powerpc/configs/mpc7448_hpc2_defconfig | 103 ++++++------ arch/powerpc/configs/mpc8272_ads_defconfig | 104 +++++++----- arch/powerpc/configs/mpc83xx_defconfig | 162 ++++++++++++------ arch/powerpc/configs/mpc85xx_defconfig | 193 ++++++++++------------ arch/powerpc/configs/mpc85xx_smp_defconfig | 193 ++++++++++------------ arch/powerpc/configs/mpc866_ads_defconfig | 92 ++++++----- arch/powerpc/configs/mpc86xx_defconfig | 186 ++++++++++----------- arch/powerpc/configs/mpc885_ads_defconfig | 91 ++++++---- arch/powerpc/configs/pq2fads_defconfig | 110 +++++++----- arch/powerpc/configs/prpmc2800_defconfig | 158 ++++++++++++------ arch/powerpc/configs/storcenter_defconfig | 108 ++++++------ 52 files changed, 3639 insertions(+), 2374 deletions(-) diff --git a/arch/powerpc/configs/83xx/asp8347_defconfig b/arch/powerpc/configs/83xx/asp8347_defconfig index 27893971377..a2df0635b6d 100644 --- a/arch/powerpc/configs/83xx/asp8347_defconfig +++ b/arch/powerpc/configs/83xx/asp8347_defconfig @@ -1,26 +1,28 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.30-rc3 -# Wed May 13 17:22:05 2009 +# Linux kernel version: 2.6.31-rc4 +# Wed Jul 29 23:32:02 2009 # # CONFIG_PPC64 is not set # # Processor support # -CONFIG_6xx=y +CONFIG_PPC_BOOK3S_32=y # CONFIG_PPC_85xx is not set # CONFIG_PPC_8xx is not set # CONFIG_40x is not set # CONFIG_44x is not set # CONFIG_E200 is not set CONFIG_PPC_BOOK3S=y +CONFIG_6xx=y CONFIG_PPC_FPU=y CONFIG_FSL_EMB_PERFMON=y # CONFIG_ALTIVEC is not set CONFIG_PPC_STD_MMU=y CONFIG_PPC_STD_MMU_32=y # CONFIG_PPC_MM_SLICES is not set +CONFIG_PPC_HAVE_PMU_SUPPORT=y # CONFIG_SMP is not set CONFIG_PPC32=y CONFIG_WORD_SIZE=32 @@ -31,15 +33,16 @@ CONFIG_GENERIC_TIME=y CONFIG_GENERIC_TIME_VSYSCALL=y CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_GENERIC_HARDIRQS=y +CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set CONFIG_IRQ_PER_CPU=y CONFIG_STACKTRACE_SUPPORT=y CONFIG_HAVE_LATENCYTOP_SUPPORT=y +CONFIG_TRACE_IRQFLAGS_SUPPORT=y CONFIG_LOCKDEP_SUPPORT=y CONFIG_RWSEM_XCHGADD_ALGORITHM=y CONFIG_ARCH_HAS_ILOG2_U32=y CONFIG_GENERIC_HWEIGHT=y -CONFIG_GENERIC_CALIBRATE_DELAY=y CONFIG_GENERIC_FIND_NEXT_BIT=y # CONFIG_ARCH_NO_VIRT_TO_BUS is not set CONFIG_PPC=y @@ -53,6 +56,7 @@ CONFIG_PPC_UDBG_16550=y # CONFIG_GENERIC_TBSYNC is not set CONFIG_AUDIT_ARCH=y CONFIG_GENERIC_BUG=y +CONFIG_DTC=y # CONFIG_DEFAULT_UIMAGE is not set CONFIG_REDBOOT=y CONFIG_ARCH_SUSPEND_POSSIBLE=y @@ -60,6 +64,7 @@ CONFIG_ARCH_SUSPEND_POSSIBLE=y # CONFIG_PPC_DCR_MMIO is not set CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" +CONFIG_CONSTRUCTORS=y # # General setup @@ -108,7 +113,6 @@ CONFIG_ANON_INODES=y CONFIG_EMBEDDED=y CONFIG_SYSCTL_SYSCALL=y # CONFIG_KALLSYMS is not set -# CONFIG_STRIP_ASM_SYMS is not set CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y @@ -121,9 +125,16 @@ CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y CONFIG_AIO=y +CONFIG_HAVE_PERF_COUNTERS=y + +# +# Performance Counters +# +# CONFIG_PERF_COUNTERS is not set CONFIG_VM_EVENT_COUNTERS=y CONFIG_PCI_QUIRKS=y CONFIG_SLUB_DEBUG=y +# CONFIG_STRIP_ASM_SYMS is not set CONFIG_COMPAT_BRK=y # CONFIG_SLAB is not set CONFIG_SLUB=y @@ -136,6 +147,10 @@ CONFIG_HAVE_IOREMAP_PROT=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_ARCH_TRACEHOOK=y + +# +# GCOV-based kernel profiling +# # CONFIG_SLOW_WORK is not set # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y @@ -148,7 +163,7 @@ CONFIG_MODULE_UNLOAD=y # CONFIG_MODVERSIONS is not set # CONFIG_MODULE_SRCVERSION_ALL is not set CONFIG_BLOCK=y -# CONFIG_LBD is not set +CONFIG_LBDAF=y # CONFIG_BLK_DEV_BSG is not set # CONFIG_BLK_DEV_INTEGRITY is not set @@ -190,6 +205,7 @@ CONFIG_PPC_83xx=y # CONFIG_MPC837x_RDB is not set # CONFIG_SBC834x is not set CONFIG_ASP834x=y +# CONFIG_KMETER1 is not set CONFIG_PPC_MPC834x=y # CONFIG_PPC_86xx is not set # CONFIG_EMBEDDED6xx is not set @@ -235,6 +251,7 @@ CONFIG_BINFMT_ELF=y # CONFIG_HAVE_AOUT is not set # CONFIG_BINFMT_MISC is not set # CONFIG_IOMMU_HELPER is not set +# CONFIG_SWIOTLB is not set CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y CONFIG_ARCH_HAS_WALK_MEMORY=y CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y @@ -255,9 +272,9 @@ CONFIG_MIGRATION=y CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y -CONFIG_UNEVICTABLE_LRU=y CONFIG_HAVE_MLOCK=y CONFIG_HAVE_MLOCKED_PAGE_BIT=y +CONFIG_DEFAULT_MMAP_MIN_ADDR=4096 CONFIG_PPC_4K_PAGES=y # CONFIG_PPC_16K_PAGES is not set # CONFIG_PPC_64K_PAGES is not set @@ -366,6 +383,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set # CONFIG_PHONET is not set +# CONFIG_IEEE802154 is not set # CONFIG_NET_SCHED is not set # CONFIG_DCB is not set @@ -383,7 +401,11 @@ CONFIG_WIRELESS=y CONFIG_WIRELESS_OLD_REGULATORY=y # CONFIG_WIRELESS_EXT is not set # CONFIG_LIB80211 is not set -# CONFIG_MAC80211 is not set + +# +# CFG80211 needs to be enabled for MAC80211 +# +CONFIG_MAC80211_DEFAULT_PS_VALUE=0 # CONFIG_WIMAX is not set # CONFIG_RFKILL is not set # CONFIG_NET_9P is not set @@ -490,6 +512,7 @@ CONFIG_MTD_PHYSMAP_OF=y # CONFIG_MTD_UBI is not set CONFIG_OF_DEVICE=y CONFIG_OF_I2C=y +CONFIG_OF_MDIO=y # CONFIG_PARPORT is not set CONFIG_BLK_DEV=y # CONFIG_BLK_DEV_FD is not set @@ -525,7 +548,9 @@ CONFIG_MISC_DEVICES=y # # CONFIG_EEPROM_AT24 is not set # CONFIG_EEPROM_LEGACY is not set +# CONFIG_EEPROM_MAX6875 is not set # CONFIG_EEPROM_93CX6 is not set +# CONFIG_CB710_CORE is not set CONFIG_HAVE_IDE=y # CONFIG_IDE is not set @@ -545,14 +570,17 @@ CONFIG_HAVE_IDE=y # # -# Enable only one of the two stacks, unless you know what you are doing +# You can enable one or both FireWire driver stacks. +# + +# +# See the help texts for more information. # # CONFIG_FIREWIRE is not set # CONFIG_IEEE1394 is not set # CONFIG_I2O is not set # CONFIG_MACINTOSH_DRIVERS is not set CONFIG_NETDEVICES=y -CONFIG_COMPAT_NET_DEV_OPS=y # CONFIG_DUMMY is not set # CONFIG_BONDING is not set # CONFIG_MACVLAN is not set @@ -599,6 +627,7 @@ CONFIG_MII=y # CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set # CONFIG_NET_PCI is not set # CONFIG_B44 is not set +# CONFIG_KS8842 is not set # CONFIG_ATL2 is not set CONFIG_NETDEV_1000=y # CONFIG_ACENIC is not set @@ -618,8 +647,10 @@ CONFIG_NETDEV_1000=y # CONFIG_VIA_VELOCITY is not set # CONFIG_TIGON3 is not set # CONFIG_BNX2 is not set +# CONFIG_CNIC is not set CONFIG_FSL_PQ_MDIO=y CONFIG_GIANFAR=y +# CONFIG_MV643XX_ETH is not set # CONFIG_QLA3XXX is not set # CONFIG_ATL1 is not set # CONFIG_ATL1E is not set @@ -786,13 +817,17 @@ CONFIG_I2C_MPC=y # CONFIG_SENSORS_PCF8574 is not set # CONFIG_PCF8575 is not set # CONFIG_SENSORS_PCA9539 is not set -# CONFIG_SENSORS_MAX6875 is not set # CONFIG_SENSORS_TSL2550 is not set # CONFIG_I2C_DEBUG_CORE is not set # CONFIG_I2C_DEBUG_ALGO is not set # CONFIG_I2C_DEBUG_BUS is not set # CONFIG_I2C_DEBUG_CHIP is not set # CONFIG_SPI is not set + +# +# PPS support +# +# CONFIG_PPS is not set CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y # CONFIG_GPIOLIB is not set # CONFIG_W1 is not set @@ -847,6 +882,7 @@ CONFIG_HWMON=y # CONFIG_SENSORS_SMSC47B397 is not set # CONFIG_SENSORS_ADS7828 is not set # CONFIG_SENSORS_THMC50 is not set +# CONFIG_SENSORS_TMP401 is not set # CONFIG_SENSORS_VIA686A is not set # CONFIG_SENSORS_VT1211 is not set # CONFIG_SENSORS_VT8231 is not set @@ -900,24 +936,9 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_MFD_WM8400 is not set # CONFIG_MFD_WM8350_I2C is not set # CONFIG_MFD_PCF50633 is not set +# CONFIG_AB3100_CORE is not set # CONFIG_REGULATOR is not set - -# -# Multimedia devices -# - -# -# Multimedia core support -# -# CONFIG_VIDEO_DEV is not set -# CONFIG_DVB_CORE is not set -# CONFIG_VIDEO_MEDIA is not set - -# -# Multimedia drivers -# -CONFIG_DAB=y -# CONFIG_USB_DABUSB is not set +# CONFIG_MEDIA_SUPPORT is not set # # Graphics support @@ -960,6 +981,7 @@ CONFIG_USB_MON=y # USB Host Controller Drivers # # CONFIG_USB_C67X00_HCD is not set +# CONFIG_USB_XHCI_HCD is not set CONFIG_USB_EHCI_HCD=y CONFIG_USB_EHCI_ROOT_HUB_TT=y # CONFIG_USB_EHCI_TT_NEWSCHED is not set @@ -1069,6 +1091,7 @@ CONFIG_RTC_DRV_DS1374=y # CONFIG_RTC_DRV_S35390A is not set # CONFIG_RTC_DRV_FM3130 is not set # CONFIG_RTC_DRV_RX8581 is not set +# CONFIG_RTC_DRV_RX8025 is not set # # SPI RTC drivers @@ -1096,6 +1119,10 @@ CONFIG_RTC_DRV_DS1374=y # CONFIG_DMADEVICES is not set # CONFIG_AUXDISPLAY is not set # CONFIG_UIO is not set + +# +# TI VLYNQ +# # CONFIG_STAGING is not set # @@ -1115,10 +1142,12 @@ CONFIG_FS_MBCACHE=y # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set -CONFIG_FILE_LOCKING=y # CONFIG_XFS_FS is not set +# CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set # CONFIG_BTRFS_FS is not set +CONFIG_FILE_LOCKING=y +CONFIG_FSNOTIFY=y CONFIG_DNOTIFY=y CONFIG_INOTIFY=y CONFIG_INOTIFY_USER=y @@ -1192,6 +1221,7 @@ CONFIG_NFS_FS=y CONFIG_NFS_V3=y # CONFIG_NFS_V3_ACL is not set CONFIG_NFS_V4=y +# CONFIG_NFS_V4_1 is not set CONFIG_ROOT_NFS=y # CONFIG_NFSD is not set CONFIG_LOCKD=y @@ -1287,6 +1317,7 @@ CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y CONFIG_HAVE_LMB=y CONFIG_NLATTR=y +CONFIG_GENERIC_ATOMIC64=y # # Kernel hacking @@ -1312,22 +1343,11 @@ CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y CONFIG_HAVE_DYNAMIC_FTRACE=y CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y CONFIG_TRACING_SUPPORT=y - -# -# Tracers -# -# CONFIG_FUNCTION_TRACER is not set -# CONFIG_SCHED_TRACER is not set -# CONFIG_CONTEXT_SWITCH_TRACER is not set -# CONFIG_EVENT_TRACER is not set -# CONFIG_BOOT_TRACER is not set -# CONFIG_TRACE_BRANCH_PROFILING is not set -# CONFIG_STACK_TRACER is not set -# CONFIG_KMEMTRACE is not set -# CONFIG_WORKQUEUE_TRACER is not set -# CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_FTRACE is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y +# CONFIG_PPC_DISABLE_WERROR is not set +CONFIG_PPC_WERROR=y CONFIG_PRINT_STACK_DEPTH=64 # CONFIG_IRQSTACKS is not set # CONFIG_BOOTX_TEXT is not set diff --git a/arch/powerpc/configs/83xx/kmeter1_defconfig b/arch/powerpc/configs/83xx/kmeter1_defconfig index bf0853f29f3..93ebd443a18 100644 --- a/arch/powerpc/configs/83xx/kmeter1_defconfig +++ b/arch/powerpc/configs/83xx/kmeter1_defconfig @@ -1,25 +1,28 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.28 -# Fri Apr 3 10:34:33 2009 +# Linux kernel version: 2.6.31-rc4 +# Wed Jul 29 23:32:03 2009 # # CONFIG_PPC64 is not set # # Processor support # -CONFIG_6xx=y +CONFIG_PPC_BOOK3S_32=y # CONFIG_PPC_85xx is not set # CONFIG_PPC_8xx is not set # CONFIG_40x is not set # CONFIG_44x is not set # CONFIG_E200 is not set +CONFIG_PPC_BOOK3S=y +CONFIG_6xx=y CONFIG_PPC_FPU=y # CONFIG_FSL_EMB_PERFMON is not set # CONFIG_ALTIVEC is not set CONFIG_PPC_STD_MMU=y CONFIG_PPC_STD_MMU_32=y # CONFIG_PPC_MM_SLICES is not set +CONFIG_PPC_HAVE_PMU_SUPPORT=y # CONFIG_SMP is not set CONFIG_PPC32=y CONFIG_WORD_SIZE=32 @@ -30,21 +33,22 @@ CONFIG_GENERIC_TIME=y CONFIG_GENERIC_TIME_VSYSCALL=y CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_GENERIC_HARDIRQS=y +CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set CONFIG_IRQ_PER_CPU=y CONFIG_STACKTRACE_SUPPORT=y CONFIG_HAVE_LATENCYTOP_SUPPORT=y +CONFIG_TRACE_IRQFLAGS_SUPPORT=y CONFIG_LOCKDEP_SUPPORT=y CONFIG_RWSEM_XCHGADD_ALGORITHM=y CONFIG_ARCH_HAS_ILOG2_U32=y CONFIG_GENERIC_HWEIGHT=y -CONFIG_GENERIC_CALIBRATE_DELAY=y CONFIG_GENERIC_FIND_NEXT_BIT=y # CONFIG_ARCH_NO_VIRT_TO_BUS is not set CONFIG_PPC=y CONFIG_EARLY_PRINTK=y CONFIG_GENERIC_NVRAM=y -CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y +CONFIG_SCHED_OMIT_FRAME_POINTER=y CONFIG_ARCH_MAY_HAVE_PC_FDC=y CONFIG_PPC_OF=y CONFIG_OF=y @@ -52,11 +56,14 @@ CONFIG_PPC_UDBG_16550=y # CONFIG_GENERIC_TBSYNC is not set CONFIG_AUDIT_ARCH=y CONFIG_GENERIC_BUG=y +CONFIG_DTC=y CONFIG_DEFAULT_UIMAGE=y CONFIG_ARCH_SUSPEND_POSSIBLE=y # CONFIG_PPC_DCR_NATIVE is not set # CONFIG_PPC_DCR_MMIO is not set +CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" +CONFIG_CONSTRUCTORS=y # # General setup @@ -71,19 +78,30 @@ CONFIG_LOCALVERSION_AUTO=y CONFIG_SYSVIPC=y CONFIG_SYSVIPC_SYSCTL=y CONFIG_POSIX_MQUEUE=y +CONFIG_POSIX_MQUEUE_SYSCTL=y # CONFIG_BSD_PROCESS_ACCT is not set # CONFIG_TASKSTATS is not set # CONFIG_AUDIT is not set + +# +# RCU Subsystem +# +CONFIG_CLASSIC_RCU=y +# CONFIG_TREE_RCU is not set +# CONFIG_PREEMPT_RCU is not set +# CONFIG_TREE_RCU_TRACE is not set +# CONFIG_PREEMPT_RCU_TRACE is not set # CONFIG_IKCONFIG is not set CONFIG_LOG_BUF_SHIFT=14 -# CONFIG_CGROUPS is not set # CONFIG_GROUP_SCHED is not set +# CONFIG_CGROUPS is not set # CONFIG_SYSFS_DEPRECATED_V2 is not set # CONFIG_RELAY is not set # CONFIG_NAMESPACES is not set # CONFIG_BLK_DEV_INITRD is not set CONFIG_CC_OPTIMIZE_FOR_SIZE=y CONFIG_SYSCTL=y +CONFIG_ANON_INODES=y CONFIG_EMBEDDED=y CONFIG_SYSCTL_SYSCALL=y CONFIG_KALLSYMS=y @@ -93,17 +111,23 @@ CONFIG_KALLSYMS_ALL=y CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_ELF_CORE=y -CONFIG_COMPAT_BRK=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y -CONFIG_ANON_INODES=y CONFIG_EPOLL=y CONFIG_SIGNALFD=y CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y CONFIG_AIO=y +CONFIG_HAVE_PERF_COUNTERS=y + +# +# Performance Counters +# +# CONFIG_PERF_COUNTERS is not set CONFIG_VM_EVENT_COUNTERS=y +# CONFIG_STRIP_ASM_SYMS is not set +CONFIG_COMPAT_BRK=y CONFIG_SLAB=y # CONFIG_SLUB is not set # CONFIG_SLOB is not set @@ -116,10 +140,15 @@ CONFIG_HAVE_IOREMAP_PROT=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_ARCH_TRACEHOOK=y + +# +# GCOV-based kernel profiling +# +# CONFIG_GCOV_KERNEL is not set +# CONFIG_SLOW_WORK is not set # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y -# CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 CONFIG_MODULES=y # CONFIG_MODULE_FORCE_LOAD is not set @@ -127,11 +156,8 @@ CONFIG_MODULE_UNLOAD=y # CONFIG_MODULE_FORCE_UNLOAD is not set # CONFIG_MODVERSIONS is not set # CONFIG_MODULE_SRCVERSION_ALL is not set -CONFIG_KMOD=y CONFIG_BLOCK=y -# CONFIG_LBD is not set -# CONFIG_BLK_DEV_IO_TRACE is not set -# CONFIG_LSF is not set +CONFIG_LBDAF=y # CONFIG_BLK_DEV_BSG is not set # CONFIG_BLK_DEV_INTEGRITY is not set @@ -147,14 +173,11 @@ CONFIG_IOSCHED_NOOP=y # CONFIG_DEFAULT_CFQ is not set CONFIG_DEFAULT_NOOP=y CONFIG_DEFAULT_IOSCHED="noop" -CONFIG_CLASSIC_RCU=y # CONFIG_FREEZER is not set # # Platform support # -CONFIG_PPC_MULTIPLATFORM=y -CONFIG_CLASSIC32=y # CONFIG_PPC_CHRP is not set # CONFIG_MPC5121_ADS is not set # CONFIG_MPC5121_GENERIC is not set @@ -179,6 +202,8 @@ CONFIG_PPC_83xx=y CONFIG_KMETER1=y # CONFIG_PPC_86xx is not set # CONFIG_EMBEDDED6xx is not set +# CONFIG_AMIGAONE is not set +CONFIG_PPC_OF_BOOT_TRAMPOLINE=y CONFIG_IPIC=y # CONFIG_MPIC is not set # CONFIG_MPIC_WEIRD is not set @@ -194,6 +219,8 @@ CONFIG_IPIC=y CONFIG_QUICC_ENGINE=y # CONFIG_QE_GPIO is not set # CONFIG_FSL_ULI1575 is not set +# CONFIG_SIMPLE_GPIO is not set +# CONFIG_MCU_MPC8349EMITX is not set # # Kernel options @@ -212,16 +239,17 @@ CONFIG_SCHED_HRTICK=y # CONFIG_PREEMPT_NONE is not set # CONFIG_PREEMPT_VOLUNTARY is not set CONFIG_PREEMPT=y -# CONFIG_PREEMPT_RCU is not set CONFIG_BINFMT_ELF=y # CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set # CONFIG_HAVE_AOUT is not set # CONFIG_BINFMT_MISC is not set # CONFIG_IOMMU_HELPER is not set +# CONFIG_SWIOTLB is not set CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y CONFIG_ARCH_HAS_WALK_MEMORY=y CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y # CONFIG_KEXEC is not set +# CONFIG_CRASH_DUMP is not set CONFIG_ARCH_FLATMEM_ENABLE=y CONFIG_ARCH_POPULATES_NODE_MAP=y CONFIG_SELECT_MEMORY_MODEL=y @@ -233,12 +261,17 @@ CONFIG_FLAT_NODE_MEM_MAP=y CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 CONFIG_MIGRATION=y -# CONFIG_RESOURCES_64BIT is not set # CONFIG_PHYS_ADDR_T_64BIT is not set CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y -CONFIG_UNEVICTABLE_LRU=y +CONFIG_HAVE_MLOCK=y +CONFIG_HAVE_MLOCKED_PAGE_BIT=y +CONFIG_DEFAULT_MMAP_MIN_ADDR=4096 +CONFIG_PPC_4K_PAGES=y +# CONFIG_PPC_16K_PAGES is not set +# CONFIG_PPC_64K_PAGES is not set +# CONFIG_PPC_256K_PAGES is not set CONFIG_FORCE_MAX_ZONEORDER=11 CONFIG_PROC_DEVICETREE=y # CONFIG_CMDLINE_BOOL is not set @@ -331,7 +364,10 @@ CONFIG_LLC=m # CONFIG_LAPB is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set +# CONFIG_PHONET is not set +# CONFIG_IEEE802154 is not set # CONFIG_NET_SCHED is not set +# CONFIG_DCB is not set # # Network testing @@ -342,8 +378,8 @@ CONFIG_LLC=m # CONFIG_IRDA is not set # CONFIG_BT is not set # CONFIG_AF_RXRPC is not set -# CONFIG_PHONET is not set # CONFIG_WIRELESS is not set +# CONFIG_WIMAX is not set # CONFIG_RFKILL is not set # CONFIG_NET_9P is not set @@ -362,6 +398,7 @@ CONFIG_MTD=y # CONFIG_MTD_DEBUG is not set CONFIG_MTD_CONCAT=y CONFIG_MTD_PARTITIONS=y +# CONFIG_MTD_TESTS is not set # CONFIG_MTD_REDBOOT_PARTS is not set CONFIG_MTD_CMDLINE_PARTS=y CONFIG_MTD_OF_PARTS=y @@ -430,6 +467,11 @@ CONFIG_MTD_PHRAM=y # CONFIG_MTD_NAND is not set # CONFIG_MTD_ONENAND is not set +# +# LPDDR flash memory drivers +# +# CONFIG_MTD_LPDDR is not set + # # UBI - Unsorted block images # @@ -445,7 +487,6 @@ CONFIG_MTD_UBI_DEBUG=y # CONFIG_MTD_UBI_DEBUG_MSG is not set # CONFIG_MTD_UBI_DEBUG_PARANOID is not set # CONFIG_MTD_UBI_DEBUG_DISABLE_BGT is not set -# CONFIG_MTD_UBI_DEBUG_USERSPACE_IO is not set # CONFIG_MTD_UBI_DEBUG_EMULATE_BITFLIPS is not set # CONFIG_MTD_UBI_DEBUG_EMULATE_WRITE_FAILURES is not set # CONFIG_MTD_UBI_DEBUG_EMULATE_ERASE_FAILURES is not set @@ -459,6 +500,7 @@ CONFIG_MTD_UBI_DEBUG=y # CONFIG_MTD_UBI_DEBUG_MSG_IO is not set CONFIG_OF_DEVICE=y CONFIG_OF_I2C=y +CONFIG_OF_MDIO=y # CONFIG_PARPORT is not set CONFIG_BLK_DEV=y # CONFIG_BLK_DEV_FD is not set @@ -505,10 +547,15 @@ CONFIG_MARVELL_PHY=y # CONFIG_BROADCOM_PHY is not set # CONFIG_ICPLUS_PHY is not set # CONFIG_REALTEK_PHY is not set +# CONFIG_NATIONAL_PHY is not set +# CONFIG_STE10XP is not set +# CONFIG_LSI_ET1011C_PHY is not set # CONFIG_FIXED_PHY is not set # CONFIG_MDIO_BITBANG is not set CONFIG_NET_ETHERNET=y CONFIG_MII=y +# CONFIG_ETHOC is not set +# CONFIG_DNET is not set # CONFIG_IBM_NEW_EMAC_ZMII is not set # CONFIG_IBM_NEW_EMAC_RGMII is not set # CONFIG_IBM_NEW_EMAC_TAH is not set @@ -517,11 +564,12 @@ CONFIG_MII=y # CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set # CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set # CONFIG_B44 is not set +# CONFIG_KS8842 is not set CONFIG_NETDEV_1000=y +CONFIG_FSL_PQ_MDIO=y # CONFIG_GIANFAR is not set CONFIG_UCC_GETH=y # CONFIG_UGETH_MAGIC_PACKET is not set -# CONFIG_UGETH_FILTERING is not set # CONFIG_UGETH_TX_ON_DEMAND is not set # CONFIG_MV643XX_ETH is not set # CONFIG_NETDEV_10000 is not set @@ -531,7 +579,10 @@ CONFIG_UCC_GETH=y # # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set -# CONFIG_IWLWIFI_LEDS is not set + +# +# Enable WiMAX (Networking options) to see the WiMAX drivers +# CONFIG_WAN=y CONFIG_HDLC=y # CONFIG_HDLC_RAW is not set @@ -543,8 +594,6 @@ CONFIG_HDLC=y # # X.25/LAPB support is disabled # -CONFIG_HDLC_KM=y -CONFIG_FS_UCC_HDLC=y # CONFIG_DLCI is not set CONFIG_PPP=y CONFIG_PPP_MULTILINK=y @@ -600,16 +649,18 @@ CONFIG_SERIAL_CORE_CONSOLE=y # CONFIG_SERIAL_OF_PLATFORM is not set # CONFIG_SERIAL_QE is not set CONFIG_UNIX98_PTYS=y +# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set CONFIG_LEGACY_PTYS=y CONFIG_LEGACY_PTY_COUNT=256 +# CONFIG_HVC_UDBG is not set # CONFIG_IPMI_HANDLER is not set CONFIG_HW_RANDOM=y +# CONFIG_HW_RANDOM_TIMERIOMEM is not set # CONFIG_NVRAM is not set # CONFIG_GEN_RTC is not set # CONFIG_R3964 is not set # CONFIG_RAW_DRIVER is not set # CONFIG_TCG_TPM is not set -CONFIG_BOOTCOUNT=y CONFIG_I2C=y CONFIG_I2C_BOARDINFO=y CONFIG_I2C_CHARDEV=y @@ -642,20 +693,20 @@ CONFIG_I2C_MPC=y # Miscellaneous I2C Chip support # # CONFIG_DS1682 is not set -# CONFIG_AT24 is not set -# CONFIG_SENSORS_EEPROM is not set # CONFIG_SENSORS_PCF8574 is not set # CONFIG_PCF8575 is not set # CONFIG_SENSORS_PCA9539 is not set -# CONFIG_SENSORS_PCF8591 is not set -# CONFIG_SENSORS_MAX6875 is not set # CONFIG_SENSORS_TSL2550 is not set -# CONFIG_MCU_MPC8349EMITX is not set # CONFIG_I2C_DEBUG_CORE is not set # CONFIG_I2C_DEBUG_ALGO is not set # CONFIG_I2C_DEBUG_BUS is not set # CONFIG_I2C_DEBUG_CHIP is not set # CONFIG_SPI is not set + +# +# PPS support +# +# CONFIG_PPS is not set CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y # CONFIG_GPIOLIB is not set # CONFIG_W1 is not set @@ -677,27 +728,15 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_MFD_CORE is not set # CONFIG_MFD_SM501 is not set # CONFIG_HTC_PASIC3 is not set +# CONFIG_TWL4030_CORE is not set # CONFIG_MFD_TMIO is not set # CONFIG_PMIC_DA903X is not set # CONFIG_MFD_WM8400 is not set # CONFIG_MFD_WM8350_I2C is not set +# CONFIG_MFD_PCF50633 is not set +# CONFIG_AB3100_CORE is not set # CONFIG_REGULATOR is not set - -# -# Multimedia devices -# - -# -# Multimedia core support -# -# CONFIG_VIDEO_DEV is not set -# CONFIG_DVB_CORE is not set -# CONFIG_VIDEO_MEDIA is not set - -# -# Multimedia drivers -# -# CONFIG_DAB is not set +# CONFIG_MEDIA_SUPPORT is not set # # Graphics support @@ -720,11 +759,16 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_EDAC is not set # CONFIG_RTC_CLASS is not set # CONFIG_DMADEVICES is not set +# CONFIG_AUXDISPLAY is not set CONFIG_UIO=y # CONFIG_UIO_PDRV is not set # CONFIG_UIO_PDRV_GENIRQ is not set # CONFIG_UIO_SMX is not set # CONFIG_UIO_SERCOS3 is not set + +# +# TI VLYNQ +# # CONFIG_STAGING is not set # @@ -736,9 +780,12 @@ CONFIG_UIO=y # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set -CONFIG_FILE_LOCKING=y # CONFIG_XFS_FS is not set +# CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set +# CONFIG_BTRFS_FS is not set +CONFIG_FILE_LOCKING=y +CONFIG_FSNOTIFY=y # CONFIG_DNOTIFY is not set CONFIG_INOTIFY=y CONFIG_INOTIFY_USER=y @@ -747,6 +794,11 @@ CONFIG_INOTIFY_USER=y # CONFIG_AUTOFS4_FS is not set # CONFIG_FUSE_FS is not set +# +# Caches +# +# CONFIG_FSCACHE is not set + # # CD-ROM/DVD Filesystems # @@ -772,10 +824,7 @@ CONFIG_TMPFS=y # CONFIG_TMPFS_POSIX_ACL is not set # CONFIG_HUGETLB_PAGE is not set # CONFIG_CONFIGFS_FS is not set - -# -# Miscellaneous filesystems -# +CONFIG_MISC_FILESYSTEMS=y # CONFIG_ADFS_FS is not set # CONFIG_AFFS_FS is not set # CONFIG_HFS_FS is not set @@ -796,6 +845,7 @@ CONFIG_JFFS2_RTIME=y # CONFIG_JFFS2_RUBIN is not set # CONFIG_UBIFS_FS is not set # CONFIG_CRAMFS is not set +# CONFIG_SQUASHFS is not set # CONFIG_VXFS_FS is not set # CONFIG_MINIX_FS is not set # CONFIG_OMFS_FS is not set @@ -804,6 +854,7 @@ CONFIG_JFFS2_RTIME=y # CONFIG_ROMFS_FS is not set # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set +# CONFIG_NILFS2_FS is not set CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NFS_FS=y CONFIG_NFS_V3=y @@ -815,7 +866,6 @@ CONFIG_LOCKD=y CONFIG_LOCKD_V4=y CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y -# CONFIG_SUNRPC_REGISTER_V4 is not set # CONFIG_RPCSEC_GSS_KRB5 is not set # CONFIG_RPCSEC_GSS_SPKM3 is not set # CONFIG_SMB_FS is not set @@ -845,11 +895,13 @@ CONFIG_PARTITION_ADVANCED=y # CONFIG_DLM is not set CONFIG_UCC_FAST=y CONFIG_UCC=y +# CONFIG_BINARY_PRINTF is not set # # Library routines # CONFIG_BITREVERSE=y +CONFIG_GENERIC_FIND_LAST_BIT=y # CONFIG_CRC_CCITT is not set # CONFIG_CRC16 is not set # CONFIG_CRC_T10DIF is not set @@ -859,11 +911,12 @@ CONFIG_CRC32=y # CONFIG_LIBCRC32C is not set CONFIG_ZLIB_INFLATE=y CONFIG_ZLIB_DEFLATE=y -CONFIG_PLIST=y CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y CONFIG_HAVE_LMB=y +CONFIG_NLATTR=y +CONFIG_GENERIC_ATOMIC64=y # # Kernel hacking @@ -883,13 +936,18 @@ CONFIG_DEBUG_FS=y # CONFIG_LATENCYTOP is not set CONFIG_SYSCTL_SYSCALL_CHECK=y CONFIG_HAVE_FUNCTION_TRACER=y - -# -# Tracers -# -# CONFIG_DYNAMIC_PRINTK_DEBUG is not set +CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y +CONFIG_HAVE_DYNAMIC_FTRACE=y +CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y +CONFIG_TRACING_SUPPORT=y +# CONFIG_FTRACE is not set +# CONFIG_DYNAMIC_DEBUG is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y +# CONFIG_PPC_DISABLE_WERROR is not set +CONFIG_PPC_WERROR=y +CONFIG_PRINT_STACK_DEPTH=64 +# CONFIG_PPC_EMULATED_STATS is not set # CONFIG_IRQSTACKS is not set # CONFIG_VIRQ_DEBUG is not set # CONFIG_BOOTX_TEXT is not set diff --git a/arch/powerpc/configs/83xx/mpc8313_rdb_defconfig b/arch/powerpc/configs/83xx/mpc8313_rdb_defconfig index c5c0fe71a43..ff33a7db2ea 100644 --- a/arch/powerpc/configs/83xx/mpc8313_rdb_defconfig +++ b/arch/powerpc/configs/83xx/mpc8313_rdb_defconfig @@ -1,26 +1,28 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.30-rc3 -# Wed May 13 17:22:06 2009 +# Linux kernel version: 2.6.31-rc4 +# Wed Jul 29 23:32:04 2009 # # CONFIG_PPC64 is not set # # Processor support # -CONFIG_6xx=y +CONFIG_PPC_BOOK3S_32=y # CONFIG_PPC_85xx is not set # CONFIG_PPC_8xx is not set # CONFIG_40x is not set # CONFIG_44x is not set # CONFIG_E200 is not set CONFIG_PPC_BOOK3S=y +CONFIG_6xx=y CONFIG_PPC_FPU=y # CONFIG_FSL_EMB_PERFMON is not set # CONFIG_ALTIVEC is not set CONFIG_PPC_STD_MMU=y CONFIG_PPC_STD_MMU_32=y # CONFIG_PPC_MM_SLICES is not set +CONFIG_PPC_HAVE_PMU_SUPPORT=y # CONFIG_SMP is not set CONFIG_PPC32=y CONFIG_WORD_SIZE=32 @@ -31,15 +33,16 @@ CONFIG_GENERIC_TIME=y CONFIG_GENERIC_TIME_VSYSCALL=y CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_GENERIC_HARDIRQS=y +CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set CONFIG_IRQ_PER_CPU=y CONFIG_STACKTRACE_SUPPORT=y CONFIG_HAVE_LATENCYTOP_SUPPORT=y +CONFIG_TRACE_IRQFLAGS_SUPPORT=y CONFIG_LOCKDEP_SUPPORT=y CONFIG_RWSEM_XCHGADD_ALGORITHM=y CONFIG_ARCH_HAS_ILOG2_U32=y CONFIG_GENERIC_HWEIGHT=y -CONFIG_GENERIC_CALIBRATE_DELAY=y CONFIG_GENERIC_FIND_NEXT_BIT=y # CONFIG_ARCH_NO_VIRT_TO_BUS is not set CONFIG_PPC=y @@ -53,12 +56,14 @@ CONFIG_PPC_UDBG_16550=y # CONFIG_GENERIC_TBSYNC is not set CONFIG_AUDIT_ARCH=y CONFIG_GENERIC_BUG=y +CONFIG_DTC=y CONFIG_DEFAULT_UIMAGE=y CONFIG_ARCH_SUSPEND_POSSIBLE=y # CONFIG_PPC_DCR_NATIVE is not set # CONFIG_PPC_DCR_MMIO is not set CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" +CONFIG_CONSTRUCTORS=y # # General setup @@ -107,7 +112,6 @@ CONFIG_ANON_INODES=y CONFIG_EMBEDDED=y CONFIG_SYSCTL_SYSCALL=y # CONFIG_KALLSYMS is not set -# CONFIG_STRIP_ASM_SYMS is not set CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y @@ -120,9 +124,16 @@ CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y CONFIG_AIO=y +CONFIG_HAVE_PERF_COUNTERS=y + +# +# Performance Counters +# +# CONFIG_PERF_COUNTERS is not set CONFIG_VM_EVENT_COUNTERS=y CONFIG_PCI_QUIRKS=y CONFIG_SLUB_DEBUG=y +# CONFIG_STRIP_ASM_SYMS is not set CONFIG_COMPAT_BRK=y # CONFIG_SLAB is not set CONFIG_SLUB=y @@ -135,6 +146,10 @@ CONFIG_HAVE_IOREMAP_PROT=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_ARCH_TRACEHOOK=y + +# +# GCOV-based kernel profiling +# # CONFIG_SLOW_WORK is not set # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y @@ -147,7 +162,7 @@ CONFIG_MODULE_UNLOAD=y # CONFIG_MODVERSIONS is not set # CONFIG_MODULE_SRCVERSION_ALL is not set CONFIG_BLOCK=y -# CONFIG_LBD is not set +CONFIG_LBDAF=y # CONFIG_BLK_DEV_BSG is not set # CONFIG_BLK_DEV_INTEGRITY is not set @@ -189,6 +204,7 @@ CONFIG_MPC831x_RDB=y # CONFIG_MPC837x_RDB is not set # CONFIG_SBC834x is not set # CONFIG_ASP834x is not set +# CONFIG_KMETER1 is not set CONFIG_PPC_MPC831x=y # CONFIG_PPC_86xx is not set # CONFIG_EMBEDDED6xx is not set @@ -234,6 +250,7 @@ CONFIG_BINFMT_ELF=y # CONFIG_HAVE_AOUT is not set # CONFIG_BINFMT_MISC is not set # CONFIG_IOMMU_HELPER is not set +# CONFIG_SWIOTLB is not set CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y CONFIG_ARCH_HAS_WALK_MEMORY=y CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y @@ -254,9 +271,9 @@ CONFIG_MIGRATION=y CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y -CONFIG_UNEVICTABLE_LRU=y CONFIG_HAVE_MLOCK=y CONFIG_HAVE_MLOCKED_PAGE_BIT=y +CONFIG_DEFAULT_MMAP_MIN_ADDR=4096 CONFIG_PPC_4K_PAGES=y # CONFIG_PPC_16K_PAGES is not set # CONFIG_PPC_64K_PAGES is not set @@ -366,6 +383,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set # CONFIG_PHONET is not set +# CONFIG_IEEE802154 is not set # CONFIG_NET_SCHED is not set # CONFIG_DCB is not set @@ -383,7 +401,11 @@ CONFIG_WIRELESS=y CONFIG_WIRELESS_OLD_REGULATORY=y # CONFIG_WIRELESS_EXT is not set # CONFIG_LIB80211 is not set -# CONFIG_MAC80211 is not set + +# +# CFG80211 needs to be enabled for MAC80211 +# +CONFIG_MAC80211_DEFAULT_PS_VALUE=0 # CONFIG_WIMAX is not set # CONFIG_RFKILL is not set # CONFIG_NET_9P is not set @@ -503,6 +525,7 @@ CONFIG_MTD_NAND_FSL_ELBC=y CONFIG_OF_DEVICE=y CONFIG_OF_I2C=y CONFIG_OF_SPI=y +CONFIG_OF_MDIO=y # CONFIG_PARPORT is not set CONFIG_BLK_DEV=y # CONFIG_BLK_DEV_FD is not set @@ -539,7 +562,9 @@ CONFIG_MISC_DEVICES=y # CONFIG_EEPROM_AT24 is not set # CONFIG_EEPROM_AT25 is not set # CONFIG_EEPROM_LEGACY is not set +# CONFIG_EEPROM_MAX6875 is not set # CONFIG_EEPROM_93CX6 is not set +# CONFIG_CB710_CORE is not set CONFIG_HAVE_IDE=y # CONFIG_IDE is not set @@ -562,10 +587,6 @@ CONFIG_SCSI_PROC_FS=y # CONFIG_BLK_DEV_SR is not set CONFIG_CHR_DEV_SG=y # CONFIG_CHR_DEV_SCH is not set - -# -# Some SCSI devices (e.g. CD jukebox) support multiple LUNs -# # CONFIG_SCSI_MULTI_LUN is not set # CONFIG_SCSI_CONSTANTS is not set # CONFIG_SCSI_LOGGING is not set @@ -583,6 +604,7 @@ CONFIG_SCSI_SPI_ATTRS=y CONFIG_SCSI_LOWLEVEL=y # CONFIG_ISCSI_TCP is not set # CONFIG_SCSI_CXGB3_ISCSI is not set +# CONFIG_SCSI_BNX2_ISCSI is not set # CONFIG_BLK_DEV_3W_XXXX_RAID is not set # CONFIG_SCSI_3W_9XXX is not set # CONFIG_SCSI_ACARD is not set @@ -591,6 +613,7 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_SCSI_AIC7XXX_OLD is not set # CONFIG_SCSI_AIC79XX is not set # CONFIG_SCSI_AIC94XX is not set +# CONFIG_SCSI_MVSAS is not set # CONFIG_SCSI_DPT_I2O is not set # CONFIG_SCSI_ADVANSYS is not set # CONFIG_SCSI_ARCMSR is not set @@ -610,7 +633,6 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_SCSI_IPS is not set # CONFIG_SCSI_INITIO is not set # CONFIG_SCSI_INIA100 is not set -# CONFIG_SCSI_MVSAS is not set # CONFIG_SCSI_STEX is not set # CONFIG_SCSI_SYM53C8XX_2 is not set # CONFIG_SCSI_QLOGIC_1280 is not set @@ -643,14 +665,17 @@ CONFIG_MD_RAID1=y # # -# Enable only one of the two stacks, unless you know what you are doing +# You can enable one or both FireWire driver stacks. +# + +# +# See the help texts for more information. # # CONFIG_FIREWIRE is not set # CONFIG_IEEE1394 is not set # CONFIG_I2O is not set # CONFIG_MACINTOSH_DRIVERS is not set CONFIG_NETDEVICES=y -CONFIG_COMPAT_NET_DEV_OPS=y # CONFIG_DUMMY is not set # CONFIG_BONDING is not set # CONFIG_MACVLAN is not set @@ -714,6 +739,8 @@ CONFIG_E100=y # CONFIG_SMSC9420 is not set # CONFIG_SUNDANCE is not set # CONFIG_TLAN is not set +# CONFIG_KS8842 is not set +# CONFIG_KS8851 is not set # CONFIG_VIA_RHINE is not set # CONFIG_SC92031 is not set # CONFIG_ATL2 is not set @@ -735,8 +762,10 @@ CONFIG_NETDEV_1000=y # CONFIG_VIA_VELOCITY is not set # CONFIG_TIGON3 is not set # CONFIG_BNX2 is not set +# CONFIG_CNIC is not set CONFIG_FSL_PQ_MDIO=y CONFIG_GIANFAR=y +# CONFIG_MV643XX_ETH is not set # CONFIG_QLA3XXX is not set # CONFIG_ATL1 is not set # CONFIG_ATL1E is not set @@ -924,7 +953,6 @@ CONFIG_I2C_MPC=y # CONFIG_SENSORS_PCF8574 is not set # CONFIG_PCF8575 is not set # CONFIG_SENSORS_PCA9539 is not set -# CONFIG_SENSORS_MAX6875 is not set # CONFIG_SENSORS_TSL2550 is not set # CONFIG_I2C_DEBUG_CORE is not set # CONFIG_I2C_DEBUG_ALGO is not set @@ -938,13 +966,18 @@ CONFIG_SPI_MASTER=y # SPI Master Controller Drivers # CONFIG_SPI_BITBANG=y -CONFIG_SPI_MPC83xx=y +# CONFIG_SPI_MPC8xxx is not set # # SPI Protocol Masters # # CONFIG_SPI_SPIDEV is not set # CONFIG_SPI_TLE62X0 is not set + +# +# PPS support +# +# CONFIG_PPS is not set CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y # CONFIG_GPIOLIB is not set # CONFIG_W1 is not set @@ -1002,6 +1035,7 @@ CONFIG_HWMON=y # CONFIG_SENSORS_SMSC47B397 is not set # CONFIG_SENSORS_ADS7828 is not set # CONFIG_SENSORS_THMC50 is not set +# CONFIG_SENSORS_TMP401 is not set # CONFIG_SENSORS_VIA686A is not set # CONFIG_SENSORS_VT1211 is not set # CONFIG_SENSORS_VT8231 is not set @@ -1056,24 +1090,10 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_MFD_WM8400 is not set # CONFIG_MFD_WM8350_I2C is not set # CONFIG_MFD_PCF50633 is not set +# CONFIG_AB3100_CORE is not set +# CONFIG_EZX_PCAP is not set # CONFIG_REGULATOR is not set - -# -# Multimedia devices -# - -# -# Multimedia core support -# -# CONFIG_VIDEO_DEV is not set -# CONFIG_DVB_CORE is not set -# CONFIG_VIDEO_MEDIA is not set - -# -# Multimedia drivers -# -CONFIG_DAB=y -# CONFIG_USB_DABUSB is not set +# CONFIG_MEDIA_SUPPORT is not set # # Graphics support @@ -1135,6 +1155,7 @@ CONFIG_USB_MON=y # USB Host Controller Drivers # # CONFIG_USB_C67X00_HCD is not set +# CONFIG_USB_XHCI_HCD is not set CONFIG_USB_EHCI_HCD=y CONFIG_USB_EHCI_ROOT_HUB_TT=y # CONFIG_USB_EHCI_TT_NEWSCHED is not set @@ -1144,9 +1165,9 @@ CONFIG_USB_EHCI_HCD_PPC_OF=y # CONFIG_USB_ISP116X_HCD is not set # CONFIG_USB_ISP1760_HCD is not set CONFIG_USB_OHCI_HCD=y -CONFIG_USB_OHCI_HCD_PPC_OF=y CONFIG_USB_OHCI_HCD_PPC_OF_BE=y # CONFIG_USB_OHCI_HCD_PPC_OF_LE is not set +CONFIG_USB_OHCI_HCD_PPC_OF=y CONFIG_USB_OHCI_HCD_PCI=y CONFIG_USB_OHCI_BIG_ENDIAN_DESC=y CONFIG_USB_OHCI_BIG_ENDIAN_MMIO=y @@ -1235,8 +1256,9 @@ CONFIG_USB_GADGET_SELECTED=y # CONFIG_USB_GADGET_OMAP is not set # CONFIG_USB_GADGET_PXA25X is not set # CONFIG_USB_GADGET_PXA27X is not set -# CONFIG_USB_GADGET_S3C2410 is not set +# CONFIG_USB_GADGET_S3C_HSOTG is not set # CONFIG_USB_GADGET_IMX is not set +# CONFIG_USB_GADGET_S3C2410 is not set # CONFIG_USB_GADGET_M66592 is not set # CONFIG_USB_GADGET_AMD5536UDC is not set # CONFIG_USB_GADGET_FSL_QE is not set @@ -1244,9 +1266,11 @@ CONFIG_USB_GADGET_SELECTED=y CONFIG_USB_GADGET_NET2280=y CONFIG_USB_NET2280=y # CONFIG_USB_GADGET_GOKU is not set +# CONFIG_USB_GADGET_LANGWELL is not set # CONFIG_USB_GADGET_DUMMY_HCD is not set CONFIG_USB_GADGET_DUALSPEED=y # CONFIG_USB_ZERO is not set +# CONFIG_USB_AUDIO is not set CONFIG_USB_ETH=y CONFIG_USB_ETH_RNDIS=y # CONFIG_USB_GADGETFS is not set @@ -1298,6 +1322,7 @@ CONFIG_RTC_DRV_DS1307=y # CONFIG_RTC_DRV_S35390A is not set # CONFIG_RTC_DRV_FM3130 is not set # CONFIG_RTC_DRV_RX8581 is not set +# CONFIG_RTC_DRV_RX8025 is not set # # SPI RTC drivers @@ -1332,6 +1357,10 @@ CONFIG_RTC_DRV_DS1307=y # CONFIG_DMADEVICES is not set # CONFIG_AUXDISPLAY is not set # CONFIG_UIO is not set + +# +# TI VLYNQ +# # CONFIG_STAGING is not set # @@ -1351,10 +1380,12 @@ CONFIG_FS_MBCACHE=y # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set -CONFIG_FILE_LOCKING=y # CONFIG_XFS_FS is not set +# CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set # CONFIG_BTRFS_FS is not set +CONFIG_FILE_LOCKING=y +CONFIG_FSNOTIFY=y CONFIG_DNOTIFY=y CONFIG_INOTIFY=y CONFIG_INOTIFY_USER=y @@ -1428,6 +1459,7 @@ CONFIG_NFS_FS=y CONFIG_NFS_V3=y # CONFIG_NFS_V3_ACL is not set CONFIG_NFS_V4=y +# CONFIG_NFS_V4_1 is not set CONFIG_ROOT_NFS=y # CONFIG_NFSD is not set CONFIG_LOCKD=y @@ -1464,7 +1496,46 @@ CONFIG_MSDOS_PARTITION=y # CONFIG_KARMA_PARTITION is not set # CONFIG_EFI_PARTITION is not set # CONFIG_SYSV68_PARTITION is not set -# CONFIG_NLS is not set +CONFIG_NLS=y +CONFIG_NLS_DEFAULT="iso8859-1" +# CONFIG_NLS_CODEPAGE_437 is not set +# CONFIG_NLS_CODEPAGE_737 is not set +# CONFIG_NLS_CODEPAGE_775 is not set +# CONFIG_NLS_CODEPAGE_850 is not set +# CONFIG_NLS_CODEPAGE_852 is not set +# CONFIG_NLS_CODEPAGE_855 is not set +# CONFIG_NLS_CODEPAGE_857 is not set +# CONFIG_NLS_CODEPAGE_860 is not set +# CONFIG_NLS_CODEPAGE_861 is not set +# CONFIG_NLS_CODEPAGE_862 is not set +# CONFIG_NLS_CODEPAGE_863 is not set +# CONFIG_NLS_CODEPAGE_864 is not set +# CONFIG_NLS_CODEPAGE_865 is not set +# CONFIG_NLS_CODEPAGE_866 is not set +# CONFIG_NLS_CODEPAGE_869 is not set +# CONFIG_NLS_CODEPAGE_936 is not set +# CONFIG_NLS_CODEPAGE_950 is not set +# CONFIG_NLS_CODEPAGE_932 is not set +# CONFIG_NLS_CODEPAGE_949 is not set +# CONFIG_NLS_CODEPAGE_874 is not set +# CONFIG_NLS_ISO8859_8 is not set +# CONFIG_NLS_CODEPAGE_1250 is not set +# CONFIG_NLS_CODEPAGE_1251 is not set +# CONFIG_NLS_ASCII is not set +# CONFIG_NLS_ISO8859_1 is not set +# CONFIG_NLS_ISO8859_2 is not set +# CONFIG_NLS_ISO8859_3 is not set +# CONFIG_NLS_ISO8859_4 is not set +# CONFIG_NLS_ISO8859_5 is not set +# CONFIG_NLS_ISO8859_6 is not set +# CONFIG_NLS_ISO8859_7 is not set +# CONFIG_NLS_ISO8859_9 is not set +# CONFIG_NLS_ISO8859_13 is not set +# CONFIG_NLS_ISO8859_14 is not set +# CONFIG_NLS_ISO8859_15 is not set +# CONFIG_NLS_KOI8_R is not set +# CONFIG_NLS_KOI8_U is not set +# CONFIG_NLS_UTF8 is not set # CONFIG_DLM is not set # CONFIG_BINARY_PRINTF is not set @@ -1488,6 +1559,7 @@ CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y CONFIG_HAVE_LMB=y CONFIG_NLATTR=y +CONFIG_GENERIC_ATOMIC64=y # # Kernel hacking @@ -1518,6 +1590,9 @@ CONFIG_SCHED_DEBUG=y # CONFIG_RT_MUTEX_TESTER is not set # CONFIG_DEBUG_SPINLOCK is not set # CONFIG_DEBUG_MUTEXES is not set +# CONFIG_DEBUG_LOCK_ALLOC is not set +# CONFIG_PROVE_LOCKING is not set +# CONFIG_LOCK_STAT is not set # CONFIG_DEBUG_SPINLOCK_SLEEP is not set # CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set # CONFIG_DEBUG_KOBJECT is not set @@ -1529,7 +1604,6 @@ CONFIG_SCHED_DEBUG=y # CONFIG_DEBUG_LIST is not set # CONFIG_DEBUG_SG is not set # CONFIG_DEBUG_NOTIFIERS is not set -# CONFIG_BOOT_PRINTK_DELAY is not set # CONFIG_RCU_TORTURE_TEST is not set # CONFIG_RCU_CPU_STALL_DETECTOR is not set # CONFIG_BACKTRACE_SELF_TEST is not set @@ -1543,16 +1617,15 @@ CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y CONFIG_HAVE_DYNAMIC_FTRACE=y CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y CONFIG_TRACING_SUPPORT=y - -# -# Tracers -# +CONFIG_FTRACE=y # CONFIG_FUNCTION_TRACER is not set +# CONFIG_IRQSOFF_TRACER is not set # CONFIG_SCHED_TRACER is not set -# CONFIG_CONTEXT_SWITCH_TRACER is not set -# CONFIG_EVENT_TRACER is not set +# CONFIG_ENABLE_DEFAULT_TRACERS is not set # CONFIG_BOOT_TRACER is not set -# CONFIG_TRACE_BRANCH_PROFILING is not set +CONFIG_BRANCH_PROFILE_NONE=y +# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set +# CONFIG_PROFILE_ALL_BRANCHES is not set # CONFIG_STACK_TRACER is not set # CONFIG_KMEMTRACE is not set # CONFIG_WORKQUEUE_TRACER is not set @@ -1560,6 +1633,9 @@ CONFIG_TRACING_SUPPORT=y # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y # CONFIG_KGDB is not set +# CONFIG_KMEMCHECK is not set +# CONFIG_PPC_DISABLE_WERROR is not set +CONFIG_PPC_WERROR=y CONFIG_PRINT_STACK_DEPTH=64 # CONFIG_DEBUG_STACKOVERFLOW is not set # CONFIG_DEBUG_STACK_USAGE is not set diff --git a/arch/powerpc/configs/83xx/mpc8315_rdb_defconfig b/arch/powerpc/configs/83xx/mpc8315_rdb_defconfig index af4952feba3..76237d46670 100644 --- a/arch/powerpc/configs/83xx/mpc8315_rdb_defconfig +++ b/arch/powerpc/configs/83xx/mpc8315_rdb_defconfig @@ -1,26 +1,28 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.30-rc3 -# Wed May 13 17:22:06 2009 +# Linux kernel version: 2.6.31-rc4 +# Wed Jul 29 23:32:05 2009 # # CONFIG_PPC64 is not set # # Processor support # -CONFIG_6xx=y +CONFIG_PPC_BOOK3S_32=y # CONFIG_PPC_85xx is not set # CONFIG_PPC_8xx is not set # CONFIG_40x is not set # CONFIG_44x is not set # CONFIG_E200 is not set CONFIG_PPC_BOOK3S=y +CONFIG_6xx=y CONFIG_PPC_FPU=y # CONFIG_FSL_EMB_PERFMON is not set # CONFIG_ALTIVEC is not set CONFIG_PPC_STD_MMU=y CONFIG_PPC_STD_MMU_32=y # CONFIG_PPC_MM_SLICES is not set +CONFIG_PPC_HAVE_PMU_SUPPORT=y # CONFIG_SMP is not set CONFIG_PPC32=y CONFIG_WORD_SIZE=32 @@ -31,15 +33,16 @@ CONFIG_GENERIC_TIME=y CONFIG_GENERIC_TIME_VSYSCALL=y CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_GENERIC_HARDIRQS=y +CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set CONFIG_IRQ_PER_CPU=y CONFIG_STACKTRACE_SUPPORT=y CONFIG_HAVE_LATENCYTOP_SUPPORT=y +CONFIG_TRACE_IRQFLAGS_SUPPORT=y CONFIG_LOCKDEP_SUPPORT=y CONFIG_RWSEM_XCHGADD_ALGORITHM=y CONFIG_ARCH_HAS_ILOG2_U32=y CONFIG_GENERIC_HWEIGHT=y -CONFIG_GENERIC_CALIBRATE_DELAY=y CONFIG_GENERIC_FIND_NEXT_BIT=y # CONFIG_ARCH_NO_VIRT_TO_BUS is not set CONFIG_PPC=y @@ -53,12 +56,14 @@ CONFIG_PPC_UDBG_16550=y # CONFIG_GENERIC_TBSYNC is not set CONFIG_AUDIT_ARCH=y CONFIG_GENERIC_BUG=y +CONFIG_DTC=y CONFIG_DEFAULT_UIMAGE=y CONFIG_ARCH_SUSPEND_POSSIBLE=y # CONFIG_PPC_DCR_NATIVE is not set # CONFIG_PPC_DCR_MMIO is not set CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" +CONFIG_CONSTRUCTORS=y # # General setup @@ -107,7 +112,6 @@ CONFIG_ANON_INODES=y CONFIG_EMBEDDED=y CONFIG_SYSCTL_SYSCALL=y # CONFIG_KALLSYMS is not set -# CONFIG_STRIP_ASM_SYMS is not set CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y @@ -120,9 +124,16 @@ CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y CONFIG_AIO=y +CONFIG_HAVE_PERF_COUNTERS=y + +# +# Performance Counters +# +# CONFIG_PERF_COUNTERS is not set CONFIG_VM_EVENT_COUNTERS=y CONFIG_PCI_QUIRKS=y CONFIG_SLUB_DEBUG=y +# CONFIG_STRIP_ASM_SYMS is not set CONFIG_COMPAT_BRK=y # CONFIG_SLAB is not set CONFIG_SLUB=y @@ -135,6 +146,10 @@ CONFIG_HAVE_IOREMAP_PROT=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_ARCH_TRACEHOOK=y + +# +# GCOV-based kernel profiling +# # CONFIG_SLOW_WORK is not set # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y @@ -147,7 +162,7 @@ CONFIG_MODULE_UNLOAD=y # CONFIG_MODVERSIONS is not set # CONFIG_MODULE_SRCVERSION_ALL is not set CONFIG_BLOCK=y -# CONFIG_LBD is not set +CONFIG_LBDAF=y # CONFIG_BLK_DEV_BSG is not set # CONFIG_BLK_DEV_INTEGRITY is not set @@ -189,6 +204,7 @@ CONFIG_MPC831x_RDB=y # CONFIG_MPC837x_RDB is not set # CONFIG_SBC834x is not set # CONFIG_ASP834x is not set +# CONFIG_KMETER1 is not set CONFIG_PPC_MPC831x=y # CONFIG_PPC_86xx is not set # CONFIG_EMBEDDED6xx is not set @@ -234,6 +250,7 @@ CONFIG_BINFMT_ELF=y # CONFIG_HAVE_AOUT is not set # CONFIG_BINFMT_MISC is not set # CONFIG_IOMMU_HELPER is not set +# CONFIG_SWIOTLB is not set CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y CONFIG_ARCH_HAS_WALK_MEMORY=y CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y @@ -254,9 +271,9 @@ CONFIG_MIGRATION=y CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y -CONFIG_UNEVICTABLE_LRU=y CONFIG_HAVE_MLOCK=y CONFIG_HAVE_MLOCKED_PAGE_BIT=y +CONFIG_DEFAULT_MMAP_MIN_ADDR=4096 CONFIG_PPC_4K_PAGES=y # CONFIG_PPC_16K_PAGES is not set # CONFIG_PPC_64K_PAGES is not set @@ -366,6 +383,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set # CONFIG_PHONET is not set +# CONFIG_IEEE802154 is not set # CONFIG_NET_SCHED is not set # CONFIG_DCB is not set @@ -383,7 +401,11 @@ CONFIG_WIRELESS=y CONFIG_WIRELESS_OLD_REGULATORY=y # CONFIG_WIRELESS_EXT is not set # CONFIG_LIB80211 is not set -# CONFIG_MAC80211 is not set + +# +# CFG80211 needs to be enabled for MAC80211 +# +CONFIG_MAC80211_DEFAULT_PS_VALUE=0 # CONFIG_WIMAX is not set # CONFIG_RFKILL is not set # CONFIG_NET_9P is not set @@ -503,6 +525,7 @@ CONFIG_MTD_NAND_IDS=y CONFIG_OF_DEVICE=y CONFIG_OF_I2C=y CONFIG_OF_SPI=y +CONFIG_OF_MDIO=y # CONFIG_PARPORT is not set CONFIG_BLK_DEV=y # CONFIG_BLK_DEV_FD is not set @@ -539,7 +562,9 @@ CONFIG_MISC_DEVICES=y # CONFIG_EEPROM_AT24 is not set # CONFIG_EEPROM_AT25 is not set # CONFIG_EEPROM_LEGACY is not set +# CONFIG_EEPROM_MAX6875 is not set # CONFIG_EEPROM_93CX6 is not set +# CONFIG_CB710_CORE is not set CONFIG_HAVE_IDE=y # CONFIG_IDE is not set @@ -562,10 +587,6 @@ CONFIG_SCSI_PROC_FS=y # CONFIG_BLK_DEV_SR is not set CONFIG_CHR_DEV_SG=y # CONFIG_CHR_DEV_SCH is not set - -# -# Some SCSI devices (e.g. CD jukebox) support multiple LUNs -# # CONFIG_SCSI_MULTI_LUN is not set # CONFIG_SCSI_CONSTANTS is not set # CONFIG_SCSI_LOGGING is not set @@ -583,6 +604,7 @@ CONFIG_SCSI_SPI_ATTRS=y CONFIG_SCSI_LOWLEVEL=y # CONFIG_ISCSI_TCP is not set # CONFIG_SCSI_CXGB3_ISCSI is not set +# CONFIG_SCSI_BNX2_ISCSI is not set # CONFIG_BLK_DEV_3W_XXXX_RAID is not set # CONFIG_SCSI_3W_9XXX is not set # CONFIG_SCSI_ACARD is not set @@ -591,6 +613,7 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_SCSI_AIC7XXX_OLD is not set # CONFIG_SCSI_AIC79XX is not set # CONFIG_SCSI_AIC94XX is not set +# CONFIG_SCSI_MVSAS is not set # CONFIG_SCSI_DPT_I2O is not set # CONFIG_SCSI_ADVANSYS is not set # CONFIG_SCSI_ARCMSR is not set @@ -610,7 +633,6 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_SCSI_IPS is not set # CONFIG_SCSI_INITIO is not set # CONFIG_SCSI_INIA100 is not set -# CONFIG_SCSI_MVSAS is not set # CONFIG_SCSI_STEX is not set # CONFIG_SCSI_SYM53C8XX_2 is not set # CONFIG_SCSI_IPR is not set @@ -704,14 +726,17 @@ CONFIG_MD_RAID1=y # # -# Enable only one of the two stacks, unless you know what you are doing +# You can enable one or both FireWire driver stacks. +# + +# +# See the help texts for more information. # # CONFIG_FIREWIRE is not set # CONFIG_IEEE1394 is not set # CONFIG_I2O is not set # CONFIG_MACINTOSH_DRIVERS is not set CONFIG_NETDEVICES=y -CONFIG_COMPAT_NET_DEV_OPS=y # CONFIG_DUMMY is not set # CONFIG_BONDING is not set # CONFIG_MACVLAN is not set @@ -775,6 +800,8 @@ CONFIG_E100=y # CONFIG_SMSC9420 is not set # CONFIG_SUNDANCE is not set # CONFIG_TLAN is not set +# CONFIG_KS8842 is not set +# CONFIG_KS8851 is not set # CONFIG_VIA_RHINE is not set # CONFIG_SC92031 is not set # CONFIG_ATL2 is not set @@ -796,8 +823,10 @@ CONFIG_NETDEV_1000=y # CONFIG_VIA_VELOCITY is not set # CONFIG_TIGON3 is not set # CONFIG_BNX2 is not set +# CONFIG_CNIC is not set CONFIG_FSL_PQ_MDIO=y CONFIG_GIANFAR=y +# CONFIG_MV643XX_ETH is not set # CONFIG_QLA3XXX is not set # CONFIG_ATL1 is not set # CONFIG_ATL1E is not set @@ -985,7 +1014,6 @@ CONFIG_I2C_MPC=y # CONFIG_SENSORS_PCF8574 is not set # CONFIG_PCF8575 is not set # CONFIG_SENSORS_PCA9539 is not set -# CONFIG_SENSORS_MAX6875 is not set # CONFIG_SENSORS_TSL2550 is not set # CONFIG_I2C_DEBUG_CORE is not set # CONFIG_I2C_DEBUG_ALGO is not set @@ -999,13 +1027,18 @@ CONFIG_SPI_MASTER=y # SPI Master Controller Drivers # CONFIG_SPI_BITBANG=y -CONFIG_SPI_MPC83xx=y +# CONFIG_SPI_MPC8xxx is not set # # SPI Protocol Masters # # CONFIG_SPI_SPIDEV is not set # CONFIG_SPI_TLE62X0 is not set + +# +# PPS support +# +# CONFIG_PPS is not set CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y # CONFIG_GPIOLIB is not set # CONFIG_W1 is not set @@ -1063,6 +1096,7 @@ CONFIG_HWMON=y # CONFIG_SENSORS_SMSC47B397 is not set # CONFIG_SENSORS_ADS7828 is not set # CONFIG_SENSORS_THMC50 is not set +# CONFIG_SENSORS_TMP401 is not set # CONFIG_SENSORS_VIA686A is not set # CONFIG_SENSORS_VT1211 is not set # CONFIG_SENSORS_VT8231 is not set @@ -1117,24 +1151,10 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_MFD_WM8400 is not set # CONFIG_MFD_WM8350_I2C is not set # CONFIG_MFD_PCF50633 is not set +# CONFIG_AB3100_CORE is not set +# CONFIG_EZX_PCAP is not set # CONFIG_REGULATOR is not set - -# -# Multimedia devices -# - -# -# Multimedia core support -# -# CONFIG_VIDEO_DEV is not set -# CONFIG_DVB_CORE is not set -# CONFIG_VIDEO_MEDIA is not set - -# -# Multimedia drivers -# -CONFIG_DAB=y -# CONFIG_USB_DABUSB is not set +# CONFIG_MEDIA_SUPPORT is not set # # Graphics support @@ -1196,6 +1216,7 @@ CONFIG_USB_MON=y # USB Host Controller Drivers # # CONFIG_USB_C67X00_HCD is not set +# CONFIG_USB_XHCI_HCD is not set CONFIG_USB_EHCI_HCD=y CONFIG_USB_EHCI_ROOT_HUB_TT=y # CONFIG_USB_EHCI_TT_NEWSCHED is not set @@ -1205,9 +1226,9 @@ CONFIG_USB_EHCI_HCD_PPC_OF=y # CONFIG_USB_ISP116X_HCD is not set # CONFIG_USB_ISP1760_HCD is not set CONFIG_USB_OHCI_HCD=y -CONFIG_USB_OHCI_HCD_PPC_OF=y CONFIG_USB_OHCI_HCD_PPC_OF_BE=y # CONFIG_USB_OHCI_HCD_PPC_OF_LE is not set +CONFIG_USB_OHCI_HCD_PPC_OF=y CONFIG_USB_OHCI_HCD_PCI=y CONFIG_USB_OHCI_BIG_ENDIAN_DESC=y CONFIG_USB_OHCI_BIG_ENDIAN_MMIO=y @@ -1296,8 +1317,9 @@ CONFIG_USB_GADGET_SELECTED=y # CONFIG_USB_GADGET_OMAP is not set # CONFIG_USB_GADGET_PXA25X is not set # CONFIG_USB_GADGET_PXA27X is not set -# CONFIG_USB_GADGET_S3C2410 is not set +# CONFIG_USB_GADGET_S3C_HSOTG is not set # CONFIG_USB_GADGET_IMX is not set +# CONFIG_USB_GADGET_S3C2410 is not set # CONFIG_USB_GADGET_M66592 is not set # CONFIG_USB_GADGET_AMD5536UDC is not set # CONFIG_USB_GADGET_FSL_QE is not set @@ -1305,9 +1327,11 @@ CONFIG_USB_GADGET_SELECTED=y CONFIG_USB_GADGET_NET2280=y CONFIG_USB_NET2280=y # CONFIG_USB_GADGET_GOKU is not set +# CONFIG_USB_GADGET_LANGWELL is not set # CONFIG_USB_GADGET_DUMMY_HCD is not set CONFIG_USB_GADGET_DUALSPEED=y # CONFIG_USB_ZERO is not set +# CONFIG_USB_AUDIO is not set CONFIG_USB_ETH=y CONFIG_USB_ETH_RNDIS=y # CONFIG_USB_GADGETFS is not set @@ -1359,6 +1383,7 @@ CONFIG_RTC_DRV_DS1307=y # CONFIG_RTC_DRV_S35390A is not set # CONFIG_RTC_DRV_FM3130 is not set # CONFIG_RTC_DRV_RX8581 is not set +# CONFIG_RTC_DRV_RX8025 is not set # # SPI RTC drivers @@ -1393,6 +1418,10 @@ CONFIG_RTC_DRV_DS1307=y # CONFIG_DMADEVICES is not set # CONFIG_AUXDISPLAY is not set # CONFIG_UIO is not set + +# +# TI VLYNQ +# # CONFIG_STAGING is not set # @@ -1412,10 +1441,12 @@ CONFIG_FS_MBCACHE=y # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set -CONFIG_FILE_LOCKING=y # CONFIG_XFS_FS is not set +# CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set # CONFIG_BTRFS_FS is not set +CONFIG_FILE_LOCKING=y +CONFIG_FSNOTIFY=y CONFIG_DNOTIFY=y CONFIG_INOTIFY=y CONFIG_INOTIFY_USER=y @@ -1489,6 +1520,7 @@ CONFIG_NFS_FS=y CONFIG_NFS_V3=y # CONFIG_NFS_V3_ACL is not set CONFIG_NFS_V4=y +# CONFIG_NFS_V4_1 is not set CONFIG_ROOT_NFS=y # CONFIG_NFSD is not set CONFIG_LOCKD=y @@ -1525,7 +1557,46 @@ CONFIG_MSDOS_PARTITION=y # CONFIG_KARMA_PARTITION is not set # CONFIG_EFI_PARTITION is not set # CONFIG_SYSV68_PARTITION is not set -# CONFIG_NLS is not set +CONFIG_NLS=y +CONFIG_NLS_DEFAULT="iso8859-1" +# CONFIG_NLS_CODEPAGE_437 is not set +# CONFIG_NLS_CODEPAGE_737 is not set +# CONFIG_NLS_CODEPAGE_775 is not set +# CONFIG_NLS_CODEPAGE_850 is not set +# CONFIG_NLS_CODEPAGE_852 is not set +# CONFIG_NLS_CODEPAGE_855 is not set +# CONFIG_NLS_CODEPAGE_857 is not set +# CONFIG_NLS_CODEPAGE_860 is not set +# CONFIG_NLS_CODEPAGE_861 is not set +# CONFIG_NLS_CODEPAGE_862 is not set +# CONFIG_NLS_CODEPAGE_863 is not set +# CONFIG_NLS_CODEPAGE_864 is not set +# CONFIG_NLS_CODEPAGE_865 is not set +# CONFIG_NLS_CODEPAGE_866 is not set +# CONFIG_NLS_CODEPAGE_869 is not set +# CONFIG_NLS_CODEPAGE_936 is not set +# CONFIG_NLS_CODEPAGE_950 is not set +# CONFIG_NLS_CODEPAGE_932 is not set +# CONFIG_NLS_CODEPAGE_949 is not set +# CONFIG_NLS_CODEPAGE_874 is not set +# CONFIG_NLS_ISO8859_8 is not set +# CONFIG_NLS_CODEPAGE_1250 is not set +# CONFIG_NLS_CODEPAGE_1251 is not set +# CONFIG_NLS_ASCII is not set +# CONFIG_NLS_ISO8859_1 is not set +# CONFIG_NLS_ISO8859_2 is not set +# CONFIG_NLS_ISO8859_3 is not set +# CONFIG_NLS_ISO8859_4 is not set +# CONFIG_NLS_ISO8859_5 is not set +# CONFIG_NLS_ISO8859_6 is not set +# CONFIG_NLS_ISO8859_7 is not set +# CONFIG_NLS_ISO8859_9 is not set +# CONFIG_NLS_ISO8859_13 is not set +# CONFIG_NLS_ISO8859_14 is not set +# CONFIG_NLS_ISO8859_15 is not set +# CONFIG_NLS_KOI8_R is not set +# CONFIG_NLS_KOI8_U is not set +# CONFIG_NLS_UTF8 is not set # CONFIG_DLM is not set # CONFIG_BINARY_PRINTF is not set @@ -1549,6 +1620,7 @@ CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y CONFIG_HAVE_LMB=y CONFIG_NLATTR=y +CONFIG_GENERIC_ATOMIC64=y # # Kernel hacking @@ -1579,6 +1651,9 @@ CONFIG_SCHED_DEBUG=y # CONFIG_RT_MUTEX_TESTER is not set # CONFIG_DEBUG_SPINLOCK is not set # CONFIG_DEBUG_MUTEXES is not set +# CONFIG_DEBUG_LOCK_ALLOC is not set +# CONFIG_PROVE_LOCKING is not set +# CONFIG_LOCK_STAT is not set # CONFIG_DEBUG_SPINLOCK_SLEEP is not set # CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set # CONFIG_DEBUG_KOBJECT is not set @@ -1590,7 +1665,6 @@ CONFIG_SCHED_DEBUG=y # CONFIG_DEBUG_LIST is not set # CONFIG_DEBUG_SG is not set # CONFIG_DEBUG_NOTIFIERS is not set -# CONFIG_BOOT_PRINTK_DELAY is not set # CONFIG_RCU_TORTURE_TEST is not set # CONFIG_RCU_CPU_STALL_DETECTOR is not set # CONFIG_BACKTRACE_SELF_TEST is not set @@ -1604,16 +1678,15 @@ CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y CONFIG_HAVE_DYNAMIC_FTRACE=y CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y CONFIG_TRACING_SUPPORT=y - -# -# Tracers -# +CONFIG_FTRACE=y # CONFIG_FUNCTION_TRACER is not set +# CONFIG_IRQSOFF_TRACER is not set # CONFIG_SCHED_TRACER is not set -# CONFIG_CONTEXT_SWITCH_TRACER is not set -# CONFIG_EVENT_TRACER is not set +# CONFIG_ENABLE_DEFAULT_TRACERS is not set # CONFIG_BOOT_TRACER is not set -# CONFIG_TRACE_BRANCH_PROFILING is not set +CONFIG_BRANCH_PROFILE_NONE=y +# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set +# CONFIG_PROFILE_ALL_BRANCHES is not set # CONFIG_STACK_TRACER is not set # CONFIG_KMEMTRACE is not set # CONFIG_WORKQUEUE_TRACER is not set @@ -1621,6 +1694,9 @@ CONFIG_TRACING_SUPPORT=y # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y # CONFIG_KGDB is not set +# CONFIG_KMEMCHECK is not set +# CONFIG_PPC_DISABLE_WERROR is not set +CONFIG_PPC_WERROR=y CONFIG_PRINT_STACK_DEPTH=64 # CONFIG_DEBUG_STACKOVERFLOW is not set # CONFIG_DEBUG_STACK_USAGE is not set diff --git a/arch/powerpc/configs/83xx/mpc832x_mds_defconfig b/arch/powerpc/configs/83xx/mpc832x_mds_defconfig index 8c8f660b4fc..e0e36a11340 100644 --- a/arch/powerpc/configs/83xx/mpc832x_mds_defconfig +++ b/arch/powerpc/configs/83xx/mpc832x_mds_defconfig @@ -1,26 +1,28 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.30-rc3 -# Wed May 13 17:22:07 2009 +# Linux kernel version: 2.6.31-rc4 +# Wed Jul 29 23:32:06 2009 # # CONFIG_PPC64 is not set # # Processor support # -CONFIG_6xx=y +CONFIG_PPC_BOOK3S_32=y # CONFIG_PPC_85xx is not set # CONFIG_PPC_8xx is not set # CONFIG_40x is not set # CONFIG_44x is not set # CONFIG_E200 is not set CONFIG_PPC_BOOK3S=y +CONFIG_6xx=y CONFIG_PPC_FPU=y # CONFIG_FSL_EMB_PERFMON is not set # CONFIG_ALTIVEC is not set CONFIG_PPC_STD_MMU=y CONFIG_PPC_STD_MMU_32=y # CONFIG_PPC_MM_SLICES is not set +CONFIG_PPC_HAVE_PMU_SUPPORT=y # CONFIG_SMP is not set CONFIG_PPC32=y CONFIG_WORD_SIZE=32 @@ -31,15 +33,16 @@ CONFIG_GENERIC_TIME=y CONFIG_GENERIC_TIME_VSYSCALL=y CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_GENERIC_HARDIRQS=y +CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set CONFIG_IRQ_PER_CPU=y CONFIG_STACKTRACE_SUPPORT=y CONFIG_HAVE_LATENCYTOP_SUPPORT=y +CONFIG_TRACE_IRQFLAGS_SUPPORT=y CONFIG_LOCKDEP_SUPPORT=y CONFIG_RWSEM_XCHGADD_ALGORITHM=y CONFIG_ARCH_HAS_ILOG2_U32=y CONFIG_GENERIC_HWEIGHT=y -CONFIG_GENERIC_CALIBRATE_DELAY=y CONFIG_GENERIC_FIND_NEXT_BIT=y # CONFIG_ARCH_NO_VIRT_TO_BUS is not set CONFIG_PPC=y @@ -53,12 +56,14 @@ CONFIG_PPC_UDBG_16550=y # CONFIG_GENERIC_TBSYNC is not set CONFIG_AUDIT_ARCH=y CONFIG_GENERIC_BUG=y +CONFIG_DTC=y CONFIG_DEFAULT_UIMAGE=y CONFIG_ARCH_SUSPEND_POSSIBLE=y # CONFIG_PPC_DCR_NATIVE is not set # CONFIG_PPC_DCR_MMIO is not set CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" +CONFIG_CONSTRUCTORS=y # # General setup @@ -107,7 +112,6 @@ CONFIG_ANON_INODES=y CONFIG_EMBEDDED=y CONFIG_SYSCTL_SYSCALL=y # CONFIG_KALLSYMS is not set -# CONFIG_STRIP_ASM_SYMS is not set CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y @@ -120,9 +124,16 @@ CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y CONFIG_AIO=y +CONFIG_HAVE_PERF_COUNTERS=y + +# +# Performance Counters +# +# CONFIG_PERF_COUNTERS is not set CONFIG_VM_EVENT_COUNTERS=y CONFIG_PCI_QUIRKS=y CONFIG_SLUB_DEBUG=y +# CONFIG_STRIP_ASM_SYMS is not set CONFIG_COMPAT_BRK=y # CONFIG_SLAB is not set CONFIG_SLUB=y @@ -135,6 +146,10 @@ CONFIG_HAVE_IOREMAP_PROT=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_ARCH_TRACEHOOK=y + +# +# GCOV-based kernel profiling +# # CONFIG_SLOW_WORK is not set # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y @@ -147,7 +162,7 @@ CONFIG_MODULE_UNLOAD=y # CONFIG_MODVERSIONS is not set # CONFIG_MODULE_SRCVERSION_ALL is not set CONFIG_BLOCK=y -# CONFIG_LBD is not set +CONFIG_LBDAF=y # CONFIG_BLK_DEV_BSG is not set # CONFIG_BLK_DEV_INTEGRITY is not set @@ -189,6 +204,7 @@ CONFIG_MPC832x_MDS=y # CONFIG_MPC837x_RDB is not set # CONFIG_SBC834x is not set # CONFIG_ASP834x is not set +# CONFIG_KMETER1 is not set CONFIG_PPC_MPC832x=y # CONFIG_PPC_86xx is not set # CONFIG_EMBEDDED6xx is not set @@ -235,6 +251,7 @@ CONFIG_BINFMT_ELF=y # CONFIG_BINFMT_MISC is not set CONFIG_MATH_EMULATION=y # CONFIG_IOMMU_HELPER is not set +# CONFIG_SWIOTLB is not set CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y CONFIG_ARCH_HAS_WALK_MEMORY=y CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y @@ -255,9 +272,9 @@ CONFIG_MIGRATION=y CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y -CONFIG_UNEVICTABLE_LRU=y CONFIG_HAVE_MLOCK=y CONFIG_HAVE_MLOCKED_PAGE_BIT=y +CONFIG_DEFAULT_MMAP_MIN_ADDR=4096 CONFIG_PPC_4K_PAGES=y # CONFIG_PPC_16K_PAGES is not set # CONFIG_PPC_64K_PAGES is not set @@ -366,6 +383,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set # CONFIG_PHONET is not set +# CONFIG_IEEE802154 is not set # CONFIG_NET_SCHED is not set # CONFIG_DCB is not set @@ -383,7 +401,11 @@ CONFIG_WIRELESS=y CONFIG_WIRELESS_OLD_REGULATORY=y # CONFIG_WIRELESS_EXT is not set # CONFIG_LIB80211 is not set -# CONFIG_MAC80211 is not set + +# +# CFG80211 needs to be enabled for MAC80211 +# +CONFIG_MAC80211_DEFAULT_PS_VALUE=0 # CONFIG_WIMAX is not set # CONFIG_RFKILL is not set # CONFIG_NET_9P is not set @@ -404,6 +426,7 @@ CONFIG_PREVENT_FIRMWARE_BUILD=y # CONFIG_MTD is not set CONFIG_OF_DEVICE=y CONFIG_OF_I2C=y +CONFIG_OF_MDIO=y # CONFIG_PARPORT is not set CONFIG_BLK_DEV=y # CONFIG_BLK_DEV_FD is not set @@ -438,7 +461,9 @@ CONFIG_MISC_DEVICES=y # # CONFIG_EEPROM_AT24 is not set # CONFIG_EEPROM_LEGACY is not set +# CONFIG_EEPROM_MAX6875 is not set # CONFIG_EEPROM_93CX6 is not set +# CONFIG_CB710_CORE is not set CONFIG_HAVE_IDE=y # CONFIG_IDE is not set @@ -461,10 +486,6 @@ CONFIG_SCSI_PROC_FS=y # CONFIG_BLK_DEV_SR is not set # CONFIG_CHR_DEV_SG is not set # CONFIG_CHR_DEV_SCH is not set - -# -# Some SCSI devices (e.g. CD jukebox) support multiple LUNs -# # CONFIG_SCSI_MULTI_LUN is not set # CONFIG_SCSI_CONSTANTS is not set # CONFIG_SCSI_LOGGING is not set @@ -482,6 +503,7 @@ CONFIG_SCSI_WAIT_SCAN=m CONFIG_SCSI_LOWLEVEL=y # CONFIG_ISCSI_TCP is not set # CONFIG_SCSI_CXGB3_ISCSI is not set +# CONFIG_SCSI_BNX2_ISCSI is not set # CONFIG_BLK_DEV_3W_XXXX_RAID is not set # CONFIG_SCSI_3W_9XXX is not set # CONFIG_SCSI_ACARD is not set @@ -490,6 +512,7 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_SCSI_AIC7XXX_OLD is not set # CONFIG_SCSI_AIC79XX is not set # CONFIG_SCSI_AIC94XX is not set +# CONFIG_SCSI_MVSAS is not set # CONFIG_SCSI_DPT_I2O is not set # CONFIG_SCSI_ADVANSYS is not set # CONFIG_SCSI_ARCMSR is not set @@ -509,7 +532,6 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_SCSI_IPS is not set # CONFIG_SCSI_INITIO is not set # CONFIG_SCSI_INIA100 is not set -# CONFIG_SCSI_MVSAS is not set # CONFIG_SCSI_STEX is not set # CONFIG_SCSI_SYM53C8XX_2 is not set # CONFIG_SCSI_QLOGIC_1280 is not set @@ -532,14 +554,17 @@ CONFIG_SCSI_LOWLEVEL=y # # -# Enable only one of the two stacks, unless you know what you are doing +# You can enable one or both FireWire driver stacks. +# + +# +# See the help texts for more information. # # CONFIG_FIREWIRE is not set # CONFIG_IEEE1394 is not set # CONFIG_I2O is not set # CONFIG_MACINTOSH_DRIVERS is not set CONFIG_NETDEVICES=y -CONFIG_COMPAT_NET_DEV_OPS=y # CONFIG_DUMMY is not set # CONFIG_BONDING is not set # CONFIG_MACVLAN is not set @@ -586,6 +611,7 @@ CONFIG_MII=y # CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set # CONFIG_NET_PCI is not set # CONFIG_B44 is not set +# CONFIG_KS8842 is not set # CONFIG_ATL2 is not set CONFIG_NETDEV_1000=y # CONFIG_ACENIC is not set @@ -605,11 +631,13 @@ CONFIG_NETDEV_1000=y # CONFIG_VIA_VELOCITY is not set # CONFIG_TIGON3 is not set # CONFIG_BNX2 is not set +# CONFIG_CNIC is not set CONFIG_FSL_PQ_MDIO=y # CONFIG_GIANFAR is not set CONFIG_UCC_GETH=y # CONFIG_UGETH_MAGIC_PACKET is not set # CONFIG_UGETH_TX_ON_DEMAND is not set +# CONFIG_MV643XX_ETH is not set # CONFIG_QLA3XXX is not set # CONFIG_ATL1 is not set # CONFIG_ATL1E is not set @@ -787,13 +815,17 @@ CONFIG_I2C_MPC=y # CONFIG_SENSORS_PCF8574 is not set # CONFIG_PCF8575 is not set # CONFIG_SENSORS_PCA9539 is not set -# CONFIG_SENSORS_MAX6875 is not set # CONFIG_SENSORS_TSL2550 is not set # CONFIG_I2C_DEBUG_CORE is not set # CONFIG_I2C_DEBUG_ALGO is not set # CONFIG_I2C_DEBUG_BUS is not set # CONFIG_I2C_DEBUG_CHIP is not set # CONFIG_SPI is not set + +# +# PPS support +# +# CONFIG_PPS is not set CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y # CONFIG_GPIOLIB is not set # CONFIG_W1 is not set @@ -848,6 +880,7 @@ CONFIG_HWMON=y # CONFIG_SENSORS_SMSC47B397 is not set # CONFIG_SENSORS_ADS7828 is not set # CONFIG_SENSORS_THMC50 is not set +# CONFIG_SENSORS_TMP401 is not set # CONFIG_SENSORS_VIA686A is not set # CONFIG_SENSORS_VT1211 is not set # CONFIG_SENSORS_VT8231 is not set @@ -896,23 +929,9 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_MFD_WM8400 is not set # CONFIG_MFD_WM8350_I2C is not set # CONFIG_MFD_PCF50633 is not set +# CONFIG_AB3100_CORE is not set # CONFIG_REGULATOR is not set - -# -# Multimedia devices -# - -# -# Multimedia core support -# -# CONFIG_VIDEO_DEV is not set -# CONFIG_DVB_CORE is not set -# CONFIG_VIDEO_MEDIA is not set - -# -# Multimedia drivers -# -CONFIG_DAB=y +# CONFIG_MEDIA_SUPPORT is not set # # Graphics support @@ -996,6 +1015,7 @@ CONFIG_RTC_DRV_DS1374=y # CONFIG_RTC_DRV_S35390A is not set # CONFIG_RTC_DRV_FM3130 is not set # CONFIG_RTC_DRV_RX8581 is not set +# CONFIG_RTC_DRV_RX8025 is not set # # SPI RTC drivers @@ -1023,6 +1043,10 @@ CONFIG_RTC_DRV_DS1374=y # CONFIG_DMADEVICES is not set # CONFIG_AUXDISPLAY is not set # CONFIG_UIO is not set + +# +# TI VLYNQ +# # CONFIG_STAGING is not set # @@ -1042,10 +1066,12 @@ CONFIG_FS_MBCACHE=y # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set -CONFIG_FILE_LOCKING=y # CONFIG_XFS_FS is not set +# CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set # CONFIG_BTRFS_FS is not set +CONFIG_FILE_LOCKING=y +CONFIG_FSNOTIFY=y CONFIG_DNOTIFY=y CONFIG_INOTIFY=y CONFIG_INOTIFY_USER=y @@ -1108,6 +1134,7 @@ CONFIG_NFS_FS=y CONFIG_NFS_V3=y # CONFIG_NFS_V3_ACL is not set CONFIG_NFS_V4=y +# CONFIG_NFS_V4_1 is not set CONFIG_ROOT_NFS=y # CONFIG_NFSD is not set CONFIG_LOCKD=y @@ -1165,6 +1192,7 @@ CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y CONFIG_HAVE_LMB=y CONFIG_NLATTR=y +CONFIG_GENERIC_ATOMIC64=y # # Kernel hacking @@ -1190,22 +1218,11 @@ CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y CONFIG_HAVE_DYNAMIC_FTRACE=y CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y CONFIG_TRACING_SUPPORT=y - -# -# Tracers -# -# CONFIG_FUNCTION_TRACER is not set -# CONFIG_SCHED_TRACER is not set -# CONFIG_CONTEXT_SWITCH_TRACER is not set -# CONFIG_EVENT_TRACER is not set -# CONFIG_BOOT_TRACER is not set -# CONFIG_TRACE_BRANCH_PROFILING is not set -# CONFIG_STACK_TRACER is not set -# CONFIG_KMEMTRACE is not set -# CONFIG_WORKQUEUE_TRACER is not set -# CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_FTRACE is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y +# CONFIG_PPC_DISABLE_WERROR is not set +CONFIG_PPC_WERROR=y CONFIG_PRINT_STACK_DEPTH=64 # CONFIG_IRQSTACKS is not set # CONFIG_BOOTX_TEXT is not set diff --git a/arch/powerpc/configs/83xx/mpc832x_rdb_defconfig b/arch/powerpc/configs/83xx/mpc832x_rdb_defconfig index 227dbba7679..4f27d454822 100644 --- a/arch/powerpc/configs/83xx/mpc832x_rdb_defconfig +++ b/arch/powerpc/configs/83xx/mpc832x_rdb_defconfig @@ -1,26 +1,28 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.30-rc3 -# Wed May 13 17:22:08 2009 +# Linux kernel version: 2.6.31-rc4 +# Wed Jul 29 23:32:07 2009 # # CONFIG_PPC64 is not set # # Processor support # -CONFIG_6xx=y +CONFIG_PPC_BOOK3S_32=y # CONFIG_PPC_85xx is not set # CONFIG_PPC_8xx is not set # CONFIG_40x is not set # CONFIG_44x is not set # CONFIG_E200 is not set CONFIG_PPC_BOOK3S=y +CONFIG_6xx=y CONFIG_PPC_FPU=y # CONFIG_FSL_EMB_PERFMON is not set # CONFIG_ALTIVEC is not set CONFIG_PPC_STD_MMU=y CONFIG_PPC_STD_MMU_32=y # CONFIG_PPC_MM_SLICES is not set +CONFIG_PPC_HAVE_PMU_SUPPORT=y # CONFIG_SMP is not set CONFIG_PPC32=y CONFIG_WORD_SIZE=32 @@ -31,15 +33,16 @@ CONFIG_GENERIC_TIME=y CONFIG_GENERIC_TIME_VSYSCALL=y CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_GENERIC_HARDIRQS=y +CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set CONFIG_IRQ_PER_CPU=y CONFIG_STACKTRACE_SUPPORT=y CONFIG_HAVE_LATENCYTOP_SUPPORT=y +CONFIG_TRACE_IRQFLAGS_SUPPORT=y CONFIG_LOCKDEP_SUPPORT=y CONFIG_RWSEM_XCHGADD_ALGORITHM=y CONFIG_ARCH_HAS_ILOG2_U32=y CONFIG_GENERIC_HWEIGHT=y -CONFIG_GENERIC_CALIBRATE_DELAY=y CONFIG_GENERIC_FIND_NEXT_BIT=y # CONFIG_ARCH_NO_VIRT_TO_BUS is not set CONFIG_PPC=y @@ -53,12 +56,14 @@ CONFIG_PPC_UDBG_16550=y # CONFIG_GENERIC_TBSYNC is not set CONFIG_AUDIT_ARCH=y CONFIG_GENERIC_BUG=y +CONFIG_DTC=y CONFIG_DEFAULT_UIMAGE=y CONFIG_ARCH_SUSPEND_POSSIBLE=y # CONFIG_PPC_DCR_NATIVE is not set # CONFIG_PPC_DCR_MMIO is not set CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" +CONFIG_CONSTRUCTORS=y # # General setup @@ -107,7 +112,6 @@ CONFIG_ANON_INODES=y CONFIG_EMBEDDED=y CONFIG_SYSCTL_SYSCALL=y # CONFIG_KALLSYMS is not set -# CONFIG_STRIP_ASM_SYMS is not set CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y @@ -120,9 +124,16 @@ CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y CONFIG_AIO=y +CONFIG_HAVE_PERF_COUNTERS=y + +# +# Performance Counters +# +# CONFIG_PERF_COUNTERS is not set CONFIG_VM_EVENT_COUNTERS=y CONFIG_PCI_QUIRKS=y CONFIG_SLUB_DEBUG=y +# CONFIG_STRIP_ASM_SYMS is not set CONFIG_COMPAT_BRK=y # CONFIG_SLAB is not set CONFIG_SLUB=y @@ -135,6 +146,10 @@ CONFIG_HAVE_IOREMAP_PROT=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_ARCH_TRACEHOOK=y + +# +# GCOV-based kernel profiling +# # CONFIG_SLOW_WORK is not set # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y @@ -147,7 +162,7 @@ CONFIG_MODULE_UNLOAD=y # CONFIG_MODVERSIONS is not set # CONFIG_MODULE_SRCVERSION_ALL is not set CONFIG_BLOCK=y -# CONFIG_LBD is not set +CONFIG_LBDAF=y # CONFIG_BLK_DEV_BSG is not set # CONFIG_BLK_DEV_INTEGRITY is not set @@ -189,6 +204,7 @@ CONFIG_MPC832x_RDB=y # CONFIG_MPC837x_RDB is not set # CONFIG_SBC834x is not set # CONFIG_ASP834x is not set +# CONFIG_KMETER1 is not set CONFIG_PPC_MPC832x=y # CONFIG_PPC_86xx is not set # CONFIG_EMBEDDED6xx is not set @@ -235,6 +251,7 @@ CONFIG_BINFMT_ELF=y # CONFIG_BINFMT_MISC is not set CONFIG_MATH_EMULATION=y # CONFIG_IOMMU_HELPER is not set +# CONFIG_SWIOTLB is not set CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y CONFIG_ARCH_HAS_WALK_MEMORY=y CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y @@ -255,9 +272,9 @@ CONFIG_MIGRATION=y CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y -CONFIG_UNEVICTABLE_LRU=y CONFIG_HAVE_MLOCK=y CONFIG_HAVE_MLOCKED_PAGE_BIT=y +CONFIG_DEFAULT_MMAP_MIN_ADDR=4096 CONFIG_PPC_4K_PAGES=y # CONFIG_PPC_16K_PAGES is not set # CONFIG_PPC_64K_PAGES is not set @@ -366,6 +383,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set # CONFIG_PHONET is not set +# CONFIG_IEEE802154 is not set # CONFIG_NET_SCHED is not set # CONFIG_DCB is not set @@ -383,7 +401,11 @@ CONFIG_WIRELESS=y CONFIG_WIRELESS_OLD_REGULATORY=y # CONFIG_WIRELESS_EXT is not set # CONFIG_LIB80211 is not set -# CONFIG_MAC80211 is not set + +# +# CFG80211 needs to be enabled for MAC80211 +# +CONFIG_MAC80211_DEFAULT_PS_VALUE=0 # CONFIG_WIMAX is not set # CONFIG_RFKILL is not set # CONFIG_NET_9P is not set @@ -405,6 +427,7 @@ CONFIG_PREVENT_FIRMWARE_BUILD=y CONFIG_OF_DEVICE=y CONFIG_OF_I2C=y CONFIG_OF_SPI=y +CONFIG_OF_MDIO=y # CONFIG_PARPORT is not set CONFIG_BLK_DEV=y # CONFIG_BLK_DEV_FD is not set @@ -441,7 +464,9 @@ CONFIG_MISC_DEVICES=y # CONFIG_EEPROM_AT24 is not set # CONFIG_EEPROM_AT25 is not set # CONFIG_EEPROM_LEGACY is not set +# CONFIG_EEPROM_MAX6875 is not set # CONFIG_EEPROM_93CX6 is not set +# CONFIG_CB710_CORE is not set CONFIG_HAVE_IDE=y # CONFIG_IDE is not set @@ -464,10 +489,6 @@ CONFIG_BLK_DEV_SD=y # CONFIG_BLK_DEV_SR is not set # CONFIG_CHR_DEV_SG is not set # CONFIG_CHR_DEV_SCH is not set - -# -# Some SCSI devices (e.g. CD jukebox) support multiple LUNs -# # CONFIG_SCSI_MULTI_LUN is not set # CONFIG_SCSI_CONSTANTS is not set # CONFIG_SCSI_LOGGING is not set @@ -485,6 +506,7 @@ CONFIG_SCSI_WAIT_SCAN=m CONFIG_SCSI_LOWLEVEL=y # CONFIG_ISCSI_TCP is not set # CONFIG_SCSI_CXGB3_ISCSI is not set +# CONFIG_SCSI_BNX2_ISCSI is not set # CONFIG_BLK_DEV_3W_XXXX_RAID is not set # CONFIG_SCSI_3W_9XXX is not set # CONFIG_SCSI_ACARD is not set @@ -493,6 +515,7 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_SCSI_AIC7XXX_OLD is not set # CONFIG_SCSI_AIC79XX is not set # CONFIG_SCSI_AIC94XX is not set +# CONFIG_SCSI_MVSAS is not set # CONFIG_SCSI_DPT_I2O is not set # CONFIG_SCSI_ADVANSYS is not set # CONFIG_SCSI_ARCMSR is not set @@ -512,7 +535,6 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_SCSI_IPS is not set # CONFIG_SCSI_INITIO is not set # CONFIG_SCSI_INIA100 is not set -# CONFIG_SCSI_MVSAS is not set # CONFIG_SCSI_STEX is not set # CONFIG_SCSI_SYM53C8XX_2 is not set # CONFIG_SCSI_QLOGIC_1280 is not set @@ -535,14 +557,17 @@ CONFIG_SCSI_LOWLEVEL=y # # -# Enable only one of the two stacks, unless you know what you are doing +# You can enable one or both FireWire driver stacks. +# + +# +# See the help texts for more information. # # CONFIG_FIREWIRE is not set # CONFIG_IEEE1394 is not set # CONFIG_I2O is not set # CONFIG_MACINTOSH_DRIVERS is not set CONFIG_NETDEVICES=y -CONFIG_COMPAT_NET_DEV_OPS=y # CONFIG_DUMMY is not set # CONFIG_BONDING is not set # CONFIG_MACVLAN is not set @@ -590,6 +615,8 @@ CONFIG_MII=y # CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set # CONFIG_NET_PCI is not set # CONFIG_B44 is not set +# CONFIG_KS8842 is not set +# CONFIG_KS8851 is not set # CONFIG_ATL2 is not set CONFIG_NETDEV_1000=y # CONFIG_ACENIC is not set @@ -609,11 +636,13 @@ CONFIG_E1000=y # CONFIG_VIA_VELOCITY is not set # CONFIG_TIGON3 is not set # CONFIG_BNX2 is not set +# CONFIG_CNIC is not set CONFIG_FSL_PQ_MDIO=y # CONFIG_GIANFAR is not set CONFIG_UCC_GETH=y # CONFIG_UGETH_MAGIC_PACKET is not set # CONFIG_UGETH_TX_ON_DEMAND is not set +# CONFIG_MV643XX_ETH is not set # CONFIG_QLA3XXX is not set # CONFIG_ATL1 is not set # CONFIG_ATL1E is not set @@ -804,7 +833,6 @@ CONFIG_I2C_MPC=y # CONFIG_SENSORS_PCF8574 is not set # CONFIG_PCF8575 is not set # CONFIG_SENSORS_PCA9539 is not set -# CONFIG_SENSORS_MAX6875 is not set # CONFIG_SENSORS_TSL2550 is not set # CONFIG_I2C_DEBUG_CORE is not set # CONFIG_I2C_DEBUG_ALGO is not set @@ -817,13 +845,18 @@ CONFIG_SPI_MASTER=y # SPI Master Controller Drivers # CONFIG_SPI_BITBANG=y -CONFIG_SPI_MPC83xx=y +# CONFIG_SPI_MPC8xxx is not set # # SPI Protocol Masters # # CONFIG_SPI_SPIDEV is not set # CONFIG_SPI_TLE62X0 is not set + +# +# PPS support +# +# CONFIG_PPS is not set CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y # CONFIG_GPIOLIB is not set # CONFIG_W1 is not set @@ -881,6 +914,7 @@ CONFIG_HWMON=y # CONFIG_SENSORS_SMSC47B397 is not set # CONFIG_SENSORS_ADS7828 is not set # CONFIG_SENSORS_THMC50 is not set +# CONFIG_SENSORS_TMP401 is not set # CONFIG_SENSORS_VIA686A is not set # CONFIG_SENSORS_VT1211 is not set # CONFIG_SENSORS_VT8231 is not set @@ -935,24 +969,10 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_MFD_WM8400 is not set # CONFIG_MFD_WM8350_I2C is not set # CONFIG_MFD_PCF50633 is not set +# CONFIG_AB3100_CORE is not set +# CONFIG_EZX_PCAP is not set # CONFIG_REGULATOR is not set - -# -# Multimedia devices -# - -# -# Multimedia core support -# -# CONFIG_VIDEO_DEV is not set -# CONFIG_DVB_CORE is not set -# CONFIG_VIDEO_MEDIA is not set - -# -# Multimedia drivers -# -CONFIG_DAB=y -# CONFIG_USB_DABUSB is not set +# CONFIG_MEDIA_SUPPORT is not set # # Graphics support @@ -1014,6 +1034,7 @@ CONFIG_USB_MON=y # USB Host Controller Drivers # # CONFIG_USB_C67X00_HCD is not set +# CONFIG_USB_XHCI_HCD is not set CONFIG_USB_EHCI_HCD=y # CONFIG_USB_EHCI_ROOT_HUB_TT is not set # CONFIG_USB_EHCI_TT_NEWSCHED is not set @@ -1023,9 +1044,9 @@ CONFIG_USB_EHCI_HCD_PPC_OF=y # CONFIG_USB_ISP116X_HCD is not set # CONFIG_USB_ISP1760_HCD is not set CONFIG_USB_OHCI_HCD=y -CONFIG_USB_OHCI_HCD_PPC_OF=y CONFIG_USB_OHCI_HCD_PPC_OF_BE=y # CONFIG_USB_OHCI_HCD_PPC_OF_LE is not set +CONFIG_USB_OHCI_HCD_PPC_OF=y CONFIG_USB_OHCI_HCD_PCI=y CONFIG_USB_OHCI_BIG_ENDIAN_DESC=y CONFIG_USB_OHCI_BIG_ENDIAN_MMIO=y @@ -1127,6 +1148,8 @@ CONFIG_MMC_BLOCK_BOUNCE=y # CONFIG_MMC_WBSD is not set # CONFIG_MMC_TIFM_SD is not set CONFIG_MMC_SPI=y +# CONFIG_MMC_CB710 is not set +# CONFIG_MMC_VIA_SDMMC is not set # CONFIG_MEMSTICK is not set # CONFIG_NEW_LEDS is not set # CONFIG_ACCESSIBILITY is not set @@ -1136,6 +1159,10 @@ CONFIG_MMC_SPI=y # CONFIG_DMADEVICES is not set # CONFIG_AUXDISPLAY is not set # CONFIG_UIO is not set + +# +# TI VLYNQ +# # CONFIG_STAGING is not set # @@ -1155,10 +1182,12 @@ CONFIG_FS_MBCACHE=y # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set -CONFIG_FILE_LOCKING=y # CONFIG_XFS_FS is not set +# CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set # CONFIG_BTRFS_FS is not set +CONFIG_FILE_LOCKING=y +CONFIG_FSNOTIFY=y CONFIG_DNOTIFY=y CONFIG_INOTIFY=y CONFIG_INOTIFY_USER=y @@ -1224,6 +1253,7 @@ CONFIG_NFS_FS=y CONFIG_NFS_V3=y # CONFIG_NFS_V3_ACL is not set CONFIG_NFS_V4=y +# CONFIG_NFS_V4_1 is not set CONFIG_ROOT_NFS=y # CONFIG_NFSD is not set CONFIG_LOCKD=y @@ -1325,6 +1355,7 @@ CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y CONFIG_HAVE_LMB=y CONFIG_NLATTR=y +CONFIG_GENERIC_ATOMIC64=y # # Kernel hacking @@ -1350,22 +1381,11 @@ CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y CONFIG_HAVE_DYNAMIC_FTRACE=y CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y CONFIG_TRACING_SUPPORT=y - -# -# Tracers -# -# CONFIG_FUNCTION_TRACER is not set -# CONFIG_SCHED_TRACER is not set -# CONFIG_CONTEXT_SWITCH_TRACER is not set -# CONFIG_EVENT_TRACER is not set -# CONFIG_BOOT_TRACER is not set -# CONFIG_TRACE_BRANCH_PROFILING is not set -# CONFIG_STACK_TRACER is not set -# CONFIG_KMEMTRACE is not set -# CONFIG_WORKQUEUE_TRACER is not set -# CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_FTRACE is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y +# CONFIG_PPC_DISABLE_WERROR is not set +CONFIG_PPC_WERROR=y CONFIG_PRINT_STACK_DEPTH=64 # CONFIG_IRQSTACKS is not set # CONFIG_BOOTX_TEXT is not set diff --git a/arch/powerpc/configs/83xx/mpc834x_itx_defconfig b/arch/powerpc/configs/83xx/mpc834x_itx_defconfig index 24ee7fcac87..648dac0c9d8 100644 --- a/arch/powerpc/configs/83xx/mpc834x_itx_defconfig +++ b/arch/powerpc/configs/83xx/mpc834x_itx_defconfig @@ -1,26 +1,28 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.30-rc3 -# Wed May 13 17:22:09 2009 +# Linux kernel version: 2.6.31-rc4 +# Wed Jul 29 23:32:07 2009 # # CONFIG_PPC64 is not set # # Processor support # -CONFIG_6xx=y +CONFIG_PPC_BOOK3S_32=y # CONFIG_PPC_85xx is not set # CONFIG_PPC_8xx is not set # CONFIG_40x is not set # CONFIG_44x is not set # CONFIG_E200 is not set CONFIG_PPC_BOOK3S=y +CONFIG_6xx=y CONFIG_PPC_FPU=y # CONFIG_FSL_EMB_PERFMON is not set # CONFIG_ALTIVEC is not set CONFIG_PPC_STD_MMU=y CONFIG_PPC_STD_MMU_32=y # CONFIG_PPC_MM_SLICES is not set +CONFIG_PPC_HAVE_PMU_SUPPORT=y # CONFIG_SMP is not set CONFIG_PPC32=y CONFIG_WORD_SIZE=32 @@ -31,15 +33,16 @@ CONFIG_GENERIC_TIME=y CONFIG_GENERIC_TIME_VSYSCALL=y CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_GENERIC_HARDIRQS=y +CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set CONFIG_IRQ_PER_CPU=y CONFIG_STACKTRACE_SUPPORT=y CONFIG_HAVE_LATENCYTOP_SUPPORT=y +CONFIG_TRACE_IRQFLAGS_SUPPORT=y CONFIG_LOCKDEP_SUPPORT=y CONFIG_RWSEM_XCHGADD_ALGORITHM=y CONFIG_ARCH_HAS_ILOG2_U32=y CONFIG_GENERIC_HWEIGHT=y -CONFIG_GENERIC_CALIBRATE_DELAY=y CONFIG_GENERIC_FIND_NEXT_BIT=y # CONFIG_ARCH_NO_VIRT_TO_BUS is not set CONFIG_PPC=y @@ -53,12 +56,14 @@ CONFIG_PPC_UDBG_16550=y # CONFIG_GENERIC_TBSYNC is not set CONFIG_AUDIT_ARCH=y CONFIG_GENERIC_BUG=y +CONFIG_DTC=y CONFIG_DEFAULT_UIMAGE=y CONFIG_ARCH_SUSPEND_POSSIBLE=y # CONFIG_PPC_DCR_NATIVE is not set # CONFIG_PPC_DCR_MMIO is not set CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" +CONFIG_CONSTRUCTORS=y # # General setup @@ -107,7 +112,6 @@ CONFIG_ANON_INODES=y CONFIG_EMBEDDED=y CONFIG_SYSCTL_SYSCALL=y # CONFIG_KALLSYMS is not set -# CONFIG_STRIP_ASM_SYMS is not set CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y @@ -120,9 +124,16 @@ CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y CONFIG_AIO=y +CONFIG_HAVE_PERF_COUNTERS=y + +# +# Performance Counters +# +# CONFIG_PERF_COUNTERS is not set CONFIG_VM_EVENT_COUNTERS=y CONFIG_PCI_QUIRKS=y CONFIG_SLUB_DEBUG=y +# CONFIG_STRIP_ASM_SYMS is not set CONFIG_COMPAT_BRK=y # CONFIG_SLAB is not set CONFIG_SLUB=y @@ -135,6 +146,10 @@ CONFIG_HAVE_IOREMAP_PROT=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_ARCH_TRACEHOOK=y + +# +# GCOV-based kernel profiling +# # CONFIG_SLOW_WORK is not set # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y @@ -147,7 +162,7 @@ CONFIG_MODULE_UNLOAD=y # CONFIG_MODVERSIONS is not set # CONFIG_MODULE_SRCVERSION_ALL is not set CONFIG_BLOCK=y -# CONFIG_LBD is not set +CONFIG_LBDAF=y # CONFIG_BLK_DEV_BSG is not set # CONFIG_BLK_DEV_INTEGRITY is not set @@ -189,6 +204,7 @@ CONFIG_MPC834x_ITX=y # CONFIG_MPC837x_RDB is not set # CONFIG_SBC834x is not set # CONFIG_ASP834x is not set +# CONFIG_KMETER1 is not set CONFIG_PPC_MPC834x=y # CONFIG_PPC_86xx is not set # CONFIG_EMBEDDED6xx is not set @@ -234,6 +250,7 @@ CONFIG_BINFMT_ELF=y # CONFIG_HAVE_AOUT is not set # CONFIG_BINFMT_MISC is not set # CONFIG_IOMMU_HELPER is not set +# CONFIG_SWIOTLB is not set CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y CONFIG_ARCH_HAS_WALK_MEMORY=y CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y @@ -254,9 +271,9 @@ CONFIG_MIGRATION=y CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y -CONFIG_UNEVICTABLE_LRU=y CONFIG_HAVE_MLOCK=y CONFIG_HAVE_MLOCKED_PAGE_BIT=y +CONFIG_DEFAULT_MMAP_MIN_ADDR=4096 CONFIG_PPC_4K_PAGES=y # CONFIG_PPC_16K_PAGES is not set # CONFIG_PPC_64K_PAGES is not set @@ -365,6 +382,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set # CONFIG_PHONET is not set +# CONFIG_IEEE802154 is not set # CONFIG_NET_SCHED is not set # CONFIG_DCB is not set @@ -382,7 +400,11 @@ CONFIG_WIRELESS=y CONFIG_WIRELESS_OLD_REGULATORY=y # CONFIG_WIRELESS_EXT is not set # CONFIG_LIB80211 is not set -# CONFIG_MAC80211 is not set + +# +# CFG80211 needs to be enabled for MAC80211 +# +CONFIG_MAC80211_DEFAULT_PS_VALUE=0 # CONFIG_WIMAX is not set # CONFIG_RFKILL is not set # CONFIG_NET_9P is not set @@ -487,6 +509,7 @@ CONFIG_MTD_PHYSMAP=y CONFIG_OF_DEVICE=y CONFIG_OF_I2C=y CONFIG_OF_SPI=y +CONFIG_OF_MDIO=y # CONFIG_PARPORT is not set CONFIG_BLK_DEV=y # CONFIG_BLK_DEV_FD is not set @@ -523,7 +546,9 @@ CONFIG_MISC_DEVICES=y # CONFIG_EEPROM_AT24 is not set # CONFIG_EEPROM_AT25 is not set # CONFIG_EEPROM_LEGACY is not set +# CONFIG_EEPROM_MAX6875 is not set # CONFIG_EEPROM_93CX6 is not set +# CONFIG_CB710_CORE is not set CONFIG_HAVE_IDE=y CONFIG_IDE=y @@ -594,10 +619,6 @@ CONFIG_BLK_DEV_SD=y # CONFIG_BLK_DEV_SR is not set CONFIG_CHR_DEV_SG=y # CONFIG_CHR_DEV_SCH is not set - -# -# Some SCSI devices (e.g. CD jukebox) support multiple LUNs -# # CONFIG_SCSI_MULTI_LUN is not set # CONFIG_SCSI_CONSTANTS is not set # CONFIG_SCSI_LOGGING is not set @@ -615,6 +636,7 @@ CONFIG_SCSI_SPI_ATTRS=y CONFIG_SCSI_LOWLEVEL=y # CONFIG_ISCSI_TCP is not set # CONFIG_SCSI_CXGB3_ISCSI is not set +# CONFIG_SCSI_BNX2_ISCSI is not set # CONFIG_BLK_DEV_3W_XXXX_RAID is not set # CONFIG_SCSI_3W_9XXX is not set # CONFIG_SCSI_ACARD is not set @@ -623,6 +645,7 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_SCSI_AIC7XXX_OLD is not set # CONFIG_SCSI_AIC79XX is not set # CONFIG_SCSI_AIC94XX is not set +# CONFIG_SCSI_MVSAS is not set # CONFIG_SCSI_DPT_I2O is not set # CONFIG_SCSI_ADVANSYS is not set # CONFIG_SCSI_ARCMSR is not set @@ -642,7 +665,6 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_SCSI_IPS is not set # CONFIG_SCSI_INITIO is not set # CONFIG_SCSI_INIA100 is not set -# CONFIG_SCSI_MVSAS is not set # CONFIG_SCSI_STEX is not set # CONFIG_SCSI_SYM53C8XX_2 is not set # CONFIG_SCSI_IPR is not set @@ -737,14 +759,17 @@ CONFIG_MD_RAID1=y # # -# Enable only one of the two stacks, unless you know what you are doing +# You can enable one or both FireWire driver stacks. +# + +# +# See the help texts for more information. # # CONFIG_FIREWIRE is not set # CONFIG_IEEE1394 is not set # CONFIG_I2O is not set # CONFIG_MACINTOSH_DRIVERS is not set CONFIG_NETDEVICES=y -CONFIG_COMPAT_NET_DEV_OPS=y # CONFIG_DUMMY is not set # CONFIG_BONDING is not set # CONFIG_MACVLAN is not set @@ -791,8 +816,10 @@ CONFIG_NETDEV_1000=y # CONFIG_VIA_VELOCITY is not set # CONFIG_TIGON3 is not set # CONFIG_BNX2 is not set +# CONFIG_CNIC is not set CONFIG_FSL_PQ_MDIO=y CONFIG_GIANFAR=y +# CONFIG_MV643XX_ETH is not set # CONFIG_QLA3XXX is not set # CONFIG_ATL1 is not set # CONFIG_ATL1E is not set @@ -960,7 +987,6 @@ CONFIG_I2C_MPC=y CONFIG_SENSORS_PCF8574=y # CONFIG_PCF8575 is not set # CONFIG_SENSORS_PCA9539 is not set -# CONFIG_SENSORS_MAX6875 is not set # CONFIG_SENSORS_TSL2550 is not set # CONFIG_I2C_DEBUG_CORE is not set # CONFIG_I2C_DEBUG_ALGO is not set @@ -973,13 +999,18 @@ CONFIG_SPI_MASTER=y # SPI Master Controller Drivers # CONFIG_SPI_BITBANG=y -CONFIG_SPI_MPC83xx=y +# CONFIG_SPI_MPC8xxx is not set # # SPI Protocol Masters # # CONFIG_SPI_SPIDEV is not set # CONFIG_SPI_TLE62X0 is not set + +# +# PPS support +# +# CONFIG_PPS is not set CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y # CONFIG_GPIOLIB is not set # CONFIG_W1 is not set @@ -1026,24 +1057,10 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_MFD_WM8400 is not set # CONFIG_MFD_WM8350_I2C is not set # CONFIG_MFD_PCF50633 is not set +# CONFIG_AB3100_CORE is not set +# CONFIG_EZX_PCAP is not set # CONFIG_REGULATOR is not set - -# -# Multimedia devices -# - -# -# Multimedia core support -# -# CONFIG_VIDEO_DEV is not set -# CONFIG_DVB_CORE is not set -# CONFIG_VIDEO_MEDIA is not set - -# -# Multimedia drivers -# -CONFIG_DAB=y -# CONFIG_USB_DABUSB is not set +# CONFIG_MEDIA_SUPPORT is not set # # Graphics support @@ -1085,6 +1102,7 @@ CONFIG_USB_MON=y # USB Host Controller Drivers # # CONFIG_USB_C67X00_HCD is not set +# CONFIG_USB_XHCI_HCD is not set CONFIG_USB_EHCI_HCD=y CONFIG_USB_EHCI_ROOT_HUB_TT=y # CONFIG_USB_EHCI_TT_NEWSCHED is not set @@ -1208,6 +1226,7 @@ CONFIG_RTC_DRV_DS1307=y # CONFIG_RTC_DRV_S35390A is not set # CONFIG_RTC_DRV_FM3130 is not set # CONFIG_RTC_DRV_RX8581 is not set +# CONFIG_RTC_DRV_RX8025 is not set # # SPI RTC drivers @@ -1242,6 +1261,10 @@ CONFIG_RTC_DRV_DS1307=y # CONFIG_DMADEVICES is not set # CONFIG_AUXDISPLAY is not set # CONFIG_UIO is not set + +# +# TI VLYNQ +# # CONFIG_STAGING is not set # @@ -1261,10 +1284,12 @@ CONFIG_FS_MBCACHE=y # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set -CONFIG_FILE_LOCKING=y # CONFIG_XFS_FS is not set +# CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set # CONFIG_BTRFS_FS is not set +CONFIG_FILE_LOCKING=y +CONFIG_FSNOTIFY=y CONFIG_DNOTIFY=y CONFIG_INOTIFY=y CONFIG_INOTIFY_USER=y @@ -1331,6 +1356,7 @@ CONFIG_NFS_FS=y CONFIG_NFS_V3=y # CONFIG_NFS_V3_ACL is not set CONFIG_NFS_V4=y +# CONFIG_NFS_V4_1 is not set CONFIG_ROOT_NFS=y # CONFIG_NFSD is not set CONFIG_LOCKD=y @@ -1429,6 +1455,7 @@ CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y CONFIG_HAVE_LMB=y CONFIG_NLATTR=y +CONFIG_GENERIC_ATOMIC64=y # # Kernel hacking @@ -1454,22 +1481,11 @@ CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y CONFIG_HAVE_DYNAMIC_FTRACE=y CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y CONFIG_TRACING_SUPPORT=y - -# -# Tracers -# -# CONFIG_FUNCTION_TRACER is not set -# CONFIG_SCHED_TRACER is not set -# CONFIG_CONTEXT_SWITCH_TRACER is not set -# CONFIG_EVENT_TRACER is not set -# CONFIG_BOOT_TRACER is not set -# CONFIG_TRACE_BRANCH_PROFILING is not set -# CONFIG_STACK_TRACER is not set -# CONFIG_KMEMTRACE is not set -# CONFIG_WORKQUEUE_TRACER is not set -# CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_FTRACE is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y +# CONFIG_PPC_DISABLE_WERROR is not set +CONFIG_PPC_WERROR=y CONFIG_PRINT_STACK_DEPTH=64 # CONFIG_IRQSTACKS is not set # CONFIG_BOOTX_TEXT is not set diff --git a/arch/powerpc/configs/83xx/mpc834x_itxgp_defconfig b/arch/powerpc/configs/83xx/mpc834x_itxgp_defconfig index 7f39543205a..bf6deb831dc 100644 --- a/arch/powerpc/configs/83xx/mpc834x_itxgp_defconfig +++ b/arch/powerpc/configs/83xx/mpc834x_itxgp_defconfig @@ -1,26 +1,28 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.30-rc3 -# Wed May 13 17:22:10 2009 +# Linux kernel version: 2.6.31-rc4 +# Wed Jul 29 23:32:08 2009 # # CONFIG_PPC64 is not set # # Processor support # -CONFIG_6xx=y +CONFIG_PPC_BOOK3S_32=y # CONFIG_PPC_85xx is not set # CONFIG_PPC_8xx is not set # CONFIG_40x is not set # CONFIG_44x is not set # CONFIG_E200 is not set CONFIG_PPC_BOOK3S=y +CONFIG_6xx=y CONFIG_PPC_FPU=y # CONFIG_FSL_EMB_PERFMON is not set # CONFIG_ALTIVEC is not set CONFIG_PPC_STD_MMU=y CONFIG_PPC_STD_MMU_32=y # CONFIG_PPC_MM_SLICES is not set +CONFIG_PPC_HAVE_PMU_SUPPORT=y # CONFIG_SMP is not set CONFIG_PPC32=y CONFIG_WORD_SIZE=32 @@ -31,15 +33,16 @@ CONFIG_GENERIC_TIME=y CONFIG_GENERIC_TIME_VSYSCALL=y CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_GENERIC_HARDIRQS=y +CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set CONFIG_IRQ_PER_CPU=y CONFIG_STACKTRACE_SUPPORT=y CONFIG_HAVE_LATENCYTOP_SUPPORT=y +CONFIG_TRACE_IRQFLAGS_SUPPORT=y CONFIG_LOCKDEP_SUPPORT=y CONFIG_RWSEM_XCHGADD_ALGORITHM=y CONFIG_ARCH_HAS_ILOG2_U32=y CONFIG_GENERIC_HWEIGHT=y -CONFIG_GENERIC_CALIBRATE_DELAY=y CONFIG_GENERIC_FIND_NEXT_BIT=y # CONFIG_ARCH_NO_VIRT_TO_BUS is not set CONFIG_PPC=y @@ -53,12 +56,14 @@ CONFIG_PPC_UDBG_16550=y # CONFIG_GENERIC_TBSYNC is not set CONFIG_AUDIT_ARCH=y CONFIG_GENERIC_BUG=y +CONFIG_DTC=y CONFIG_DEFAULT_UIMAGE=y CONFIG_ARCH_SUSPEND_POSSIBLE=y # CONFIG_PPC_DCR_NATIVE is not set # CONFIG_PPC_DCR_MMIO is not set CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" +CONFIG_CONSTRUCTORS=y # # General setup @@ -107,7 +112,6 @@ CONFIG_ANON_INODES=y CONFIG_EMBEDDED=y CONFIG_SYSCTL_SYSCALL=y # CONFIG_KALLSYMS is not set -# CONFIG_STRIP_ASM_SYMS is not set CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y @@ -120,9 +124,16 @@ CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y CONFIG_AIO=y +CONFIG_HAVE_PERF_COUNTERS=y + +# +# Performance Counters +# +# CONFIG_PERF_COUNTERS is not set CONFIG_VM_EVENT_COUNTERS=y CONFIG_PCI_QUIRKS=y CONFIG_SLUB_DEBUG=y +# CONFIG_STRIP_ASM_SYMS is not set CONFIG_COMPAT_BRK=y # CONFIG_SLAB is not set CONFIG_SLUB=y @@ -135,6 +146,10 @@ CONFIG_HAVE_IOREMAP_PROT=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_ARCH_TRACEHOOK=y + +# +# GCOV-based kernel profiling +# # CONFIG_SLOW_WORK is not set # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y @@ -147,7 +162,7 @@ CONFIG_MODULE_UNLOAD=y # CONFIG_MODVERSIONS is not set # CONFIG_MODULE_SRCVERSION_ALL is not set CONFIG_BLOCK=y -# CONFIG_LBD is not set +CONFIG_LBDAF=y # CONFIG_BLK_DEV_BSG is not set # CONFIG_BLK_DEV_INTEGRITY is not set @@ -189,6 +204,7 @@ CONFIG_MPC834x_ITX=y # CONFIG_MPC837x_RDB is not set # CONFIG_SBC834x is not set # CONFIG_ASP834x is not set +# CONFIG_KMETER1 is not set CONFIG_PPC_MPC834x=y # CONFIG_PPC_86xx is not set # CONFIG_EMBEDDED6xx is not set @@ -234,6 +250,7 @@ CONFIG_BINFMT_ELF=y # CONFIG_HAVE_AOUT is not set # CONFIG_BINFMT_MISC is not set # CONFIG_IOMMU_HELPER is not set +# CONFIG_SWIOTLB is not set CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y CONFIG_ARCH_HAS_WALK_MEMORY=y CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y @@ -254,9 +271,9 @@ CONFIG_MIGRATION=y CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y -CONFIG_UNEVICTABLE_LRU=y CONFIG_HAVE_MLOCK=y CONFIG_HAVE_MLOCKED_PAGE_BIT=y +CONFIG_DEFAULT_MMAP_MIN_ADDR=4096 CONFIG_PPC_4K_PAGES=y # CONFIG_PPC_16K_PAGES is not set # CONFIG_PPC_64K_PAGES is not set @@ -365,6 +382,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set # CONFIG_PHONET is not set +# CONFIG_IEEE802154 is not set # CONFIG_NET_SCHED is not set # CONFIG_DCB is not set @@ -382,7 +400,11 @@ CONFIG_WIRELESS=y CONFIG_WIRELESS_OLD_REGULATORY=y # CONFIG_WIRELESS_EXT is not set # CONFIG_LIB80211 is not set -# CONFIG_MAC80211 is not set + +# +# CFG80211 needs to be enabled for MAC80211 +# +CONFIG_MAC80211_DEFAULT_PS_VALUE=0 # CONFIG_WIMAX is not set # CONFIG_RFKILL is not set # CONFIG_NET_9P is not set @@ -487,6 +509,7 @@ CONFIG_MTD_PHYSMAP=y CONFIG_OF_DEVICE=y CONFIG_OF_I2C=y CONFIG_OF_SPI=y +CONFIG_OF_MDIO=y # CONFIG_PARPORT is not set CONFIG_BLK_DEV=y # CONFIG_BLK_DEV_FD is not set @@ -523,7 +546,9 @@ CONFIG_MISC_DEVICES=y # CONFIG_EEPROM_AT24 is not set # CONFIG_EEPROM_AT25 is not set # CONFIG_EEPROM_LEGACY is not set +# CONFIG_EEPROM_MAX6875 is not set # CONFIG_EEPROM_93CX6 is not set +# CONFIG_CB710_CORE is not set CONFIG_HAVE_IDE=y # CONFIG_IDE is not set @@ -546,10 +571,6 @@ CONFIG_BLK_DEV_SD=y # CONFIG_BLK_DEV_SR is not set CONFIG_CHR_DEV_SG=y # CONFIG_CHR_DEV_SCH is not set - -# -# Some SCSI devices (e.g. CD jukebox) support multiple LUNs -# # CONFIG_SCSI_MULTI_LUN is not set # CONFIG_SCSI_CONSTANTS is not set # CONFIG_SCSI_LOGGING is not set @@ -567,6 +588,7 @@ CONFIG_SCSI_SPI_ATTRS=y CONFIG_SCSI_LOWLEVEL=y # CONFIG_ISCSI_TCP is not set # CONFIG_SCSI_CXGB3_ISCSI is not set +# CONFIG_SCSI_BNX2_ISCSI is not set # CONFIG_BLK_DEV_3W_XXXX_RAID is not set # CONFIG_SCSI_3W_9XXX is not set # CONFIG_SCSI_ACARD is not set @@ -575,6 +597,7 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_SCSI_AIC7XXX_OLD is not set # CONFIG_SCSI_AIC79XX is not set # CONFIG_SCSI_AIC94XX is not set +# CONFIG_SCSI_MVSAS is not set # CONFIG_SCSI_DPT_I2O is not set # CONFIG_SCSI_ADVANSYS is not set # CONFIG_SCSI_ARCMSR is not set @@ -594,7 +617,6 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_SCSI_IPS is not set # CONFIG_SCSI_INITIO is not set # CONFIG_SCSI_INIA100 is not set -# CONFIG_SCSI_MVSAS is not set # CONFIG_SCSI_STEX is not set # CONFIG_SCSI_SYM53C8XX_2 is not set # CONFIG_SCSI_QLOGIC_1280 is not set @@ -617,14 +639,17 @@ CONFIG_SCSI_LOWLEVEL=y # # -# Enable only one of the two stacks, unless you know what you are doing +# You can enable one or both FireWire driver stacks. +# + +# +# See the help texts for more information. # # CONFIG_FIREWIRE is not set # CONFIG_IEEE1394 is not set # CONFIG_I2O is not set # CONFIG_MACINTOSH_DRIVERS is not set CONFIG_NETDEVICES=y -CONFIG_COMPAT_NET_DEV_OPS=y # CONFIG_DUMMY is not set # CONFIG_BONDING is not set # CONFIG_MACVLAN is not set @@ -671,8 +696,10 @@ CONFIG_NETDEV_1000=y # CONFIG_VIA_VELOCITY is not set # CONFIG_TIGON3 is not set # CONFIG_BNX2 is not set +# CONFIG_CNIC is not set CONFIG_FSL_PQ_MDIO=y CONFIG_GIANFAR=y +# CONFIG_MV643XX_ETH is not set # CONFIG_QLA3XXX is not set # CONFIG_ATL1 is not set # CONFIG_ATL1E is not set @@ -840,7 +867,6 @@ CONFIG_I2C_MPC=y CONFIG_SENSORS_PCF8574=y # CONFIG_PCF8575 is not set # CONFIG_SENSORS_PCA9539 is not set -# CONFIG_SENSORS_MAX6875 is not set # CONFIG_SENSORS_TSL2550 is not set # CONFIG_I2C_DEBUG_CORE is not set # CONFIG_I2C_DEBUG_ALGO is not set @@ -853,13 +879,18 @@ CONFIG_SPI_MASTER=y # SPI Master Controller Drivers # CONFIG_SPI_BITBANG=y -CONFIG_SPI_MPC83xx=y +# CONFIG_SPI_MPC8xxx is not set # # SPI Protocol Masters # # CONFIG_SPI_SPIDEV is not set # CONFIG_SPI_TLE62X0 is not set + +# +# PPS support +# +# CONFIG_PPS is not set CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y # CONFIG_GPIOLIB is not set # CONFIG_W1 is not set @@ -906,24 +937,10 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_MFD_WM8400 is not set # CONFIG_MFD_WM8350_I2C is not set # CONFIG_MFD_PCF50633 is not set +# CONFIG_AB3100_CORE is not set +# CONFIG_EZX_PCAP is not set # CONFIG_REGULATOR is not set - -# -# Multimedia devices -# - -# -# Multimedia core support -# -# CONFIG_VIDEO_DEV is not set -# CONFIG_DVB_CORE is not set -# CONFIG_VIDEO_MEDIA is not set - -# -# Multimedia drivers -# -CONFIG_DAB=y -# CONFIG_USB_DABUSB is not set +# CONFIG_MEDIA_SUPPORT is not set # # Graphics support @@ -965,6 +982,7 @@ CONFIG_USB_MON=y # USB Host Controller Drivers # # CONFIG_USB_C67X00_HCD is not set +# CONFIG_USB_XHCI_HCD is not set CONFIG_USB_EHCI_HCD=y CONFIG_USB_EHCI_ROOT_HUB_TT=y # CONFIG_USB_EHCI_TT_NEWSCHED is not set @@ -1087,6 +1105,7 @@ CONFIG_RTC_DRV_DS1307=y # CONFIG_RTC_DRV_S35390A is not set # CONFIG_RTC_DRV_FM3130 is not set # CONFIG_RTC_DRV_RX8581 is not set +# CONFIG_RTC_DRV_RX8025 is not set # # SPI RTC drivers @@ -1121,6 +1140,10 @@ CONFIG_RTC_DRV_DS1307=y # CONFIG_DMADEVICES is not set # CONFIG_AUXDISPLAY is not set # CONFIG_UIO is not set + +# +# TI VLYNQ +# # CONFIG_STAGING is not set # @@ -1140,10 +1163,12 @@ CONFIG_FS_MBCACHE=y # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set -CONFIG_FILE_LOCKING=y # CONFIG_XFS_FS is not set +# CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set # CONFIG_BTRFS_FS is not set +CONFIG_FILE_LOCKING=y +CONFIG_FSNOTIFY=y CONFIG_DNOTIFY=y CONFIG_INOTIFY=y CONFIG_INOTIFY_USER=y @@ -1210,6 +1235,7 @@ CONFIG_NFS_FS=y CONFIG_NFS_V3=y # CONFIG_NFS_V3_ACL is not set CONFIG_NFS_V4=y +# CONFIG_NFS_V4_1 is not set CONFIG_ROOT_NFS=y # CONFIG_NFSD is not set CONFIG_LOCKD=y @@ -1308,6 +1334,7 @@ CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y CONFIG_HAVE_LMB=y CONFIG_NLATTR=y +CONFIG_GENERIC_ATOMIC64=y # # Kernel hacking @@ -1333,22 +1360,11 @@ CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y CONFIG_HAVE_DYNAMIC_FTRACE=y CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y CONFIG_TRACING_SUPPORT=y - -# -# Tracers -# -# CONFIG_FUNCTION_TRACER is not set -# CONFIG_SCHED_TRACER is not set -# CONFIG_CONTEXT_SWITCH_TRACER is not set -# CONFIG_EVENT_TRACER is not set -# CONFIG_BOOT_TRACER is not set -# CONFIG_TRACE_BRANCH_PROFILING is not set -# CONFIG_STACK_TRACER is not set -# CONFIG_KMEMTRACE is not set -# CONFIG_WORKQUEUE_TRACER is not set -# CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_FTRACE is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y +# CONFIG_PPC_DISABLE_WERROR is not set +CONFIG_PPC_WERROR=y CONFIG_PRINT_STACK_DEPTH=64 # CONFIG_IRQSTACKS is not set # CONFIG_BOOTX_TEXT is not set diff --git a/arch/powerpc/configs/83xx/mpc834x_mds_defconfig b/arch/powerpc/configs/83xx/mpc834x_mds_defconfig index 1cd1fcac22c..3236c47712c 100644 --- a/arch/powerpc/configs/83xx/mpc834x_mds_defconfig +++ b/arch/powerpc/configs/83xx/mpc834x_mds_defconfig @@ -1,26 +1,28 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.30-rc3 -# Wed May 13 17:22:11 2009 +# Linux kernel version: 2.6.31-rc4 +# Wed Jul 29 23:32:09 2009 # # CONFIG_PPC64 is not set # # Processor support # -CONFIG_6xx=y +CONFIG_PPC_BOOK3S_32=y # CONFIG_PPC_85xx is not set # CONFIG_PPC_8xx is not set # CONFIG_40x is not set # CONFIG_44x is not set # CONFIG_E200 is not set CONFIG_PPC_BOOK3S=y +CONFIG_6xx=y CONFIG_PPC_FPU=y # CONFIG_FSL_EMB_PERFMON is not set # CONFIG_ALTIVEC is not set CONFIG_PPC_STD_MMU=y CONFIG_PPC_STD_MMU_32=y # CONFIG_PPC_MM_SLICES is not set +CONFIG_PPC_HAVE_PMU_SUPPORT=y # CONFIG_SMP is not set CONFIG_PPC32=y CONFIG_WORD_SIZE=32 @@ -31,15 +33,16 @@ CONFIG_GENERIC_TIME=y CONFIG_GENERIC_TIME_VSYSCALL=y CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_GENERIC_HARDIRQS=y +CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set CONFIG_IRQ_PER_CPU=y CONFIG_STACKTRACE_SUPPORT=y CONFIG_HAVE_LATENCYTOP_SUPPORT=y +CONFIG_TRACE_IRQFLAGS_SUPPORT=y CONFIG_LOCKDEP_SUPPORT=y CONFIG_RWSEM_XCHGADD_ALGORITHM=y CONFIG_ARCH_HAS_ILOG2_U32=y CONFIG_GENERIC_HWEIGHT=y -CONFIG_GENERIC_CALIBRATE_DELAY=y CONFIG_GENERIC_FIND_NEXT_BIT=y # CONFIG_ARCH_NO_VIRT_TO_BUS is not set CONFIG_PPC=y @@ -53,12 +56,14 @@ CONFIG_PPC_UDBG_16550=y # CONFIG_GENERIC_TBSYNC is not set CONFIG_AUDIT_ARCH=y CONFIG_GENERIC_BUG=y +CONFIG_DTC=y CONFIG_DEFAULT_UIMAGE=y CONFIG_ARCH_SUSPEND_POSSIBLE=y # CONFIG_PPC_DCR_NATIVE is not set # CONFIG_PPC_DCR_MMIO is not set CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" +CONFIG_CONSTRUCTORS=y # # General setup @@ -107,7 +112,6 @@ CONFIG_ANON_INODES=y CONFIG_EMBEDDED=y CONFIG_SYSCTL_SYSCALL=y # CONFIG_KALLSYMS is not set -# CONFIG_STRIP_ASM_SYMS is not set CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y @@ -120,9 +124,16 @@ CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y CONFIG_AIO=y +CONFIG_HAVE_PERF_COUNTERS=y + +# +# Performance Counters +# +# CONFIG_PERF_COUNTERS is not set CONFIG_VM_EVENT_COUNTERS=y CONFIG_PCI_QUIRKS=y CONFIG_SLUB_DEBUG=y +# CONFIG_STRIP_ASM_SYMS is not set CONFIG_COMPAT_BRK=y # CONFIG_SLAB is not set CONFIG_SLUB=y @@ -135,6 +146,10 @@ CONFIG_HAVE_IOREMAP_PROT=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_ARCH_TRACEHOOK=y + +# +# GCOV-based kernel profiling +# # CONFIG_SLOW_WORK is not set # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y @@ -147,7 +162,7 @@ CONFIG_MODULE_UNLOAD=y # CONFIG_MODVERSIONS is not set # CONFIG_MODULE_SRCVERSION_ALL is not set CONFIG_BLOCK=y -# CONFIG_LBD is not set +CONFIG_LBDAF=y # CONFIG_BLK_DEV_BSG is not set # CONFIG_BLK_DEV_INTEGRITY is not set @@ -189,6 +204,7 @@ CONFIG_MPC834x_MDS=y # CONFIG_MPC837x_RDB is not set # CONFIG_SBC834x is not set # CONFIG_ASP834x is not set +# CONFIG_KMETER1 is not set CONFIG_PPC_MPC834x=y # CONFIG_PPC_86xx is not set # CONFIG_EMBEDDED6xx is not set @@ -234,6 +250,7 @@ CONFIG_BINFMT_ELF=y # CONFIG_HAVE_AOUT is not set # CONFIG_BINFMT_MISC is not set # CONFIG_IOMMU_HELPER is not set +# CONFIG_SWIOTLB is not set CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y CONFIG_ARCH_HAS_WALK_MEMORY=y CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y @@ -254,9 +271,9 @@ CONFIG_MIGRATION=y CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y -CONFIG_UNEVICTABLE_LRU=y CONFIG_HAVE_MLOCK=y CONFIG_HAVE_MLOCKED_PAGE_BIT=y +CONFIG_DEFAULT_MMAP_MIN_ADDR=4096 CONFIG_PPC_4K_PAGES=y # CONFIG_PPC_16K_PAGES is not set # CONFIG_PPC_64K_PAGES is not set @@ -365,6 +382,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set # CONFIG_PHONET is not set +# CONFIG_IEEE802154 is not set # CONFIG_NET_SCHED is not set # CONFIG_DCB is not set @@ -382,7 +400,11 @@ CONFIG_WIRELESS=y CONFIG_WIRELESS_OLD_REGULATORY=y # CONFIG_WIRELESS_EXT is not set # CONFIG_LIB80211 is not set -# CONFIG_MAC80211 is not set + +# +# CFG80211 needs to be enabled for MAC80211 +# +CONFIG_MAC80211_DEFAULT_PS_VALUE=0 # CONFIG_WIMAX is not set # CONFIG_RFKILL is not set # CONFIG_NET_9P is not set @@ -403,6 +425,7 @@ CONFIG_PREVENT_FIRMWARE_BUILD=y # CONFIG_MTD is not set CONFIG_OF_DEVICE=y CONFIG_OF_I2C=y +CONFIG_OF_MDIO=y # CONFIG_PARPORT is not set CONFIG_BLK_DEV=y # CONFIG_BLK_DEV_FD is not set @@ -437,7 +460,9 @@ CONFIG_MISC_DEVICES=y # # CONFIG_EEPROM_AT24 is not set # CONFIG_EEPROM_LEGACY is not set +# CONFIG_EEPROM_MAX6875 is not set # CONFIG_EEPROM_93CX6 is not set +# CONFIG_CB710_CORE is not set CONFIG_HAVE_IDE=y # CONFIG_IDE is not set @@ -457,14 +482,17 @@ CONFIG_HAVE_IDE=y # # -# Enable only one of the two stacks, unless you know what you are doing +# You can enable one or both FireWire driver stacks. +# + +# +# See the help texts for more information. # # CONFIG_FIREWIRE is not set # CONFIG_IEEE1394 is not set # CONFIG_I2O is not set # CONFIG_MACINTOSH_DRIVERS is not set CONFIG_NETDEVICES=y -CONFIG_COMPAT_NET_DEV_OPS=y # CONFIG_DUMMY is not set # CONFIG_BONDING is not set # CONFIG_MACVLAN is not set @@ -527,6 +555,7 @@ CONFIG_E100=y # CONFIG_SMSC9420 is not set # CONFIG_SUNDANCE is not set # CONFIG_TLAN is not set +# CONFIG_KS8842 is not set # CONFIG_VIA_RHINE is not set # CONFIG_SC92031 is not set # CONFIG_ATL2 is not set @@ -548,8 +577,10 @@ CONFIG_NETDEV_1000=y # CONFIG_VIA_VELOCITY is not set # CONFIG_TIGON3 is not set # CONFIG_BNX2 is not set +# CONFIG_CNIC is not set CONFIG_FSL_PQ_MDIO=y CONFIG_GIANFAR=y +# CONFIG_MV643XX_ETH is not set # CONFIG_QLA3XXX is not set # CONFIG_ATL1 is not set # CONFIG_ATL1E is not set @@ -724,13 +755,17 @@ CONFIG_I2C_MPC=y # CONFIG_SENSORS_PCF8574 is not set # CONFIG_PCF8575 is not set # CONFIG_SENSORS_PCA9539 is not set -# CONFIG_SENSORS_MAX6875 is not set # CONFIG_SENSORS_TSL2550 is not set # CONFIG_I2C_DEBUG_CORE is not set # CONFIG_I2C_DEBUG_ALGO is not set # CONFIG_I2C_DEBUG_BUS is not set # CONFIG_I2C_DEBUG_CHIP is not set # CONFIG_SPI is not set + +# +# PPS support +# +# CONFIG_PPS is not set CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y # CONFIG_GPIOLIB is not set # CONFIG_W1 is not set @@ -785,6 +820,7 @@ CONFIG_HWMON=y # CONFIG_SENSORS_SMSC47B397 is not set # CONFIG_SENSORS_ADS7828 is not set # CONFIG_SENSORS_THMC50 is not set +# CONFIG_SENSORS_TMP401 is not set # CONFIG_SENSORS_VIA686A is not set # CONFIG_SENSORS_VT1211 is not set # CONFIG_SENSORS_VT8231 is not set @@ -833,23 +869,9 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_MFD_WM8400 is not set # CONFIG_MFD_WM8350_I2C is not set # CONFIG_MFD_PCF50633 is not set +# CONFIG_AB3100_CORE is not set # CONFIG_REGULATOR is not set - -# -# Multimedia devices -# - -# -# Multimedia core support -# -# CONFIG_VIDEO_DEV is not set -# CONFIG_DVB_CORE is not set -# CONFIG_VIDEO_MEDIA is not set - -# -# Multimedia drivers -# -CONFIG_DAB=y +# CONFIG_MEDIA_SUPPORT is not set # # Graphics support @@ -933,6 +955,7 @@ CONFIG_RTC_DRV_DS1374=y # CONFIG_RTC_DRV_S35390A is not set # CONFIG_RTC_DRV_FM3130 is not set # CONFIG_RTC_DRV_RX8581 is not set +# CONFIG_RTC_DRV_RX8025 is not set # # SPI RTC drivers @@ -960,6 +983,10 @@ CONFIG_RTC_DRV_DS1374=y # CONFIG_DMADEVICES is not set # CONFIG_AUXDISPLAY is not set # CONFIG_UIO is not set + +# +# TI VLYNQ +# # CONFIG_STAGING is not set # @@ -979,10 +1006,12 @@ CONFIG_FS_MBCACHE=y # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set -CONFIG_FILE_LOCKING=y # CONFIG_XFS_FS is not set +# CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set # CONFIG_BTRFS_FS is not set +CONFIG_FILE_LOCKING=y +CONFIG_FSNOTIFY=y CONFIG_DNOTIFY=y CONFIG_INOTIFY=y CONFIG_INOTIFY_USER=y @@ -1045,6 +1074,7 @@ CONFIG_NFS_FS=y CONFIG_NFS_V3=y # CONFIG_NFS_V3_ACL is not set CONFIG_NFS_V4=y +# CONFIG_NFS_V4_1 is not set CONFIG_ROOT_NFS=y # CONFIG_NFSD is not set CONFIG_LOCKD=y @@ -1100,6 +1130,7 @@ CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y CONFIG_HAVE_LMB=y CONFIG_NLATTR=y +CONFIG_GENERIC_ATOMIC64=y # # Kernel hacking @@ -1125,22 +1156,11 @@ CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y CONFIG_HAVE_DYNAMIC_FTRACE=y CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y CONFIG_TRACING_SUPPORT=y - -# -# Tracers -# -# CONFIG_FUNCTION_TRACER is not set -# CONFIG_SCHED_TRACER is not set -# CONFIG_CONTEXT_SWITCH_TRACER is not set -# CONFIG_EVENT_TRACER is not set -# CONFIG_BOOT_TRACER is not set -# CONFIG_TRACE_BRANCH_PROFILING is not set -# CONFIG_STACK_TRACER is not set -# CONFIG_KMEMTRACE is not set -# CONFIG_WORKQUEUE_TRACER is not set -# CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_FTRACE is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y +# CONFIG_PPC_DISABLE_WERROR is not set +CONFIG_PPC_WERROR=y CONFIG_PRINT_STACK_DEPTH=64 # CONFIG_IRQSTACKS is not set # CONFIG_BOOTX_TEXT is not set diff --git a/arch/powerpc/configs/83xx/mpc836x_mds_defconfig b/arch/powerpc/configs/83xx/mpc836x_mds_defconfig index ce5177393a0..8c5299d7481 100644 --- a/arch/powerpc/configs/83xx/mpc836x_mds_defconfig +++ b/arch/powerpc/configs/83xx/mpc836x_mds_defconfig @@ -1,26 +1,28 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.30-rc3 -# Wed May 13 17:22:12 2009 +# Linux kernel version: 2.6.31-rc4 +# Wed Jul 29 23:32:10 2009 # # CONFIG_PPC64 is not set # # Processor support # -CONFIG_6xx=y +CONFIG_PPC_BOOK3S_32=y # CONFIG_PPC_85xx is not set # CONFIG_PPC_8xx is not set # CONFIG_40x is not set # CONFIG_44x is not set # CONFIG_E200 is not set CONFIG_PPC_BOOK3S=y +CONFIG_6xx=y CONFIG_PPC_FPU=y # CONFIG_FSL_EMB_PERFMON is not set # CONFIG_ALTIVEC is not set CONFIG_PPC_STD_MMU=y CONFIG_PPC_STD_MMU_32=y # CONFIG_PPC_MM_SLICES is not set +CONFIG_PPC_HAVE_PMU_SUPPORT=y # CONFIG_SMP is not set CONFIG_PPC32=y CONFIG_WORD_SIZE=32 @@ -31,15 +33,16 @@ CONFIG_GENERIC_TIME=y CONFIG_GENERIC_TIME_VSYSCALL=y CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_GENERIC_HARDIRQS=y +CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set CONFIG_IRQ_PER_CPU=y CONFIG_STACKTRACE_SUPPORT=y CONFIG_HAVE_LATENCYTOP_SUPPORT=y +CONFIG_TRACE_IRQFLAGS_SUPPORT=y CONFIG_LOCKDEP_SUPPORT=y CONFIG_RWSEM_XCHGADD_ALGORITHM=y CONFIG_ARCH_HAS_ILOG2_U32=y CONFIG_GENERIC_HWEIGHT=y -CONFIG_GENERIC_CALIBRATE_DELAY=y CONFIG_GENERIC_FIND_NEXT_BIT=y # CONFIG_ARCH_NO_VIRT_TO_BUS is not set CONFIG_PPC=y @@ -53,12 +56,14 @@ CONFIG_PPC_UDBG_16550=y # CONFIG_GENERIC_TBSYNC is not set CONFIG_AUDIT_ARCH=y CONFIG_GENERIC_BUG=y +CONFIG_DTC=y CONFIG_DEFAULT_UIMAGE=y CONFIG_ARCH_SUSPEND_POSSIBLE=y # CONFIG_PPC_DCR_NATIVE is not set # CONFIG_PPC_DCR_MMIO is not set CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" +CONFIG_CONSTRUCTORS=y # # General setup @@ -107,7 +112,6 @@ CONFIG_ANON_INODES=y CONFIG_EMBEDDED=y CONFIG_SYSCTL_SYSCALL=y # CONFIG_KALLSYMS is not set -# CONFIG_STRIP_ASM_SYMS is not set CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y @@ -120,9 +124,16 @@ CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y CONFIG_AIO=y +CONFIG_HAVE_PERF_COUNTERS=y + +# +# Performance Counters +# +# CONFIG_PERF_COUNTERS is not set CONFIG_VM_EVENT_COUNTERS=y CONFIG_PCI_QUIRKS=y CONFIG_SLUB_DEBUG=y +# CONFIG_STRIP_ASM_SYMS is not set CONFIG_COMPAT_BRK=y # CONFIG_SLAB is not set CONFIG_SLUB=y @@ -135,6 +146,10 @@ CONFIG_HAVE_IOREMAP_PROT=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_ARCH_TRACEHOOK=y + +# +# GCOV-based kernel profiling +# # CONFIG_SLOW_WORK is not set # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y @@ -147,7 +162,7 @@ CONFIG_MODULE_UNLOAD=y # CONFIG_MODVERSIONS is not set # CONFIG_MODULE_SRCVERSION_ALL is not set CONFIG_BLOCK=y -# CONFIG_LBD is not set +CONFIG_LBDAF=y # CONFIG_BLK_DEV_BSG is not set # CONFIG_BLK_DEV_INTEGRITY is not set @@ -189,6 +204,7 @@ CONFIG_MPC836x_MDS=y # CONFIG_MPC837x_RDB is not set # CONFIG_SBC834x is not set # CONFIG_ASP834x is not set +# CONFIG_KMETER1 is not set # CONFIG_PPC_86xx is not set # CONFIG_EMBEDDED6xx is not set # CONFIG_AMIGAONE is not set @@ -233,6 +249,7 @@ CONFIG_BINFMT_ELF=y # CONFIG_HAVE_AOUT is not set # CONFIG_BINFMT_MISC is not set # CONFIG_IOMMU_HELPER is not set +# CONFIG_SWIOTLB is not set CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y CONFIG_ARCH_HAS_WALK_MEMORY=y CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y @@ -253,9 +270,9 @@ CONFIG_MIGRATION=y CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y -CONFIG_UNEVICTABLE_LRU=y CONFIG_HAVE_MLOCK=y CONFIG_HAVE_MLOCKED_PAGE_BIT=y +CONFIG_DEFAULT_MMAP_MIN_ADDR=4096 CONFIG_PPC_4K_PAGES=y # CONFIG_PPC_16K_PAGES is not set # CONFIG_PPC_64K_PAGES is not set @@ -364,6 +381,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set # CONFIG_PHONET is not set +# CONFIG_IEEE802154 is not set # CONFIG_NET_SCHED is not set # CONFIG_DCB is not set @@ -381,7 +399,11 @@ CONFIG_WIRELESS=y CONFIG_WIRELESS_OLD_REGULATORY=y # CONFIG_WIRELESS_EXT is not set # CONFIG_LIB80211 is not set -# CONFIG_MAC80211 is not set + +# +# CFG80211 needs to be enabled for MAC80211 +# +CONFIG_MAC80211_DEFAULT_PS_VALUE=0 # CONFIG_WIMAX is not set # CONFIG_RFKILL is not set # CONFIG_NET_9P is not set @@ -485,6 +507,7 @@ CONFIG_MTD_PHYSMAP_OF=y # CONFIG_MTD_UBI is not set CONFIG_OF_DEVICE=y CONFIG_OF_I2C=y +CONFIG_OF_MDIO=y # CONFIG_PARPORT is not set CONFIG_BLK_DEV=y # CONFIG_BLK_DEV_FD is not set @@ -519,7 +542,9 @@ CONFIG_MISC_DEVICES=y # # CONFIG_EEPROM_AT24 is not set # CONFIG_EEPROM_LEGACY is not set +# CONFIG_EEPROM_MAX6875 is not set # CONFIG_EEPROM_93CX6 is not set +# CONFIG_CB710_CORE is not set CONFIG_HAVE_IDE=y # CONFIG_IDE is not set @@ -542,10 +567,6 @@ CONFIG_SCSI_PROC_FS=y # CONFIG_BLK_DEV_SR is not set # CONFIG_CHR_DEV_SG is not set # CONFIG_CHR_DEV_SCH is not set - -# -# Some SCSI devices (e.g. CD jukebox) support multiple LUNs -# # CONFIG_SCSI_MULTI_LUN is not set # CONFIG_SCSI_CONSTANTS is not set # CONFIG_SCSI_LOGGING is not set @@ -563,6 +584,7 @@ CONFIG_SCSI_WAIT_SCAN=m CONFIG_SCSI_LOWLEVEL=y # CONFIG_ISCSI_TCP is not set # CONFIG_SCSI_CXGB3_ISCSI is not set +# CONFIG_SCSI_BNX2_ISCSI is not set # CONFIG_BLK_DEV_3W_XXXX_RAID is not set # CONFIG_SCSI_3W_9XXX is not set # CONFIG_SCSI_ACARD is not set @@ -571,6 +593,7 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_SCSI_AIC7XXX_OLD is not set # CONFIG_SCSI_AIC79XX is not set # CONFIG_SCSI_AIC94XX is not set +# CONFIG_SCSI_MVSAS is not set # CONFIG_SCSI_DPT_I2O is not set # CONFIG_SCSI_ADVANSYS is not set # CONFIG_SCSI_ARCMSR is not set @@ -590,7 +613,6 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_SCSI_IPS is not set # CONFIG_SCSI_INITIO is not set # CONFIG_SCSI_INIA100 is not set -# CONFIG_SCSI_MVSAS is not set # CONFIG_SCSI_STEX is not set # CONFIG_SCSI_SYM53C8XX_2 is not set # CONFIG_SCSI_QLOGIC_1280 is not set @@ -613,14 +635,17 @@ CONFIG_SCSI_LOWLEVEL=y # # -# Enable only one of the two stacks, unless you know what you are doing +# You can enable one or both FireWire driver stacks. +# + +# +# See the help texts for more information. # # CONFIG_FIREWIRE is not set # CONFIG_IEEE1394 is not set # CONFIG_I2O is not set # CONFIG_MACINTOSH_DRIVERS is not set CONFIG_NETDEVICES=y -CONFIG_COMPAT_NET_DEV_OPS=y # CONFIG_DUMMY is not set # CONFIG_BONDING is not set # CONFIG_MACVLAN is not set @@ -667,6 +692,7 @@ CONFIG_MII=y # CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set # CONFIG_NET_PCI is not set # CONFIG_B44 is not set +# CONFIG_KS8842 is not set # CONFIG_ATL2 is not set CONFIG_NETDEV_1000=y # CONFIG_ACENIC is not set @@ -686,11 +712,13 @@ CONFIG_NETDEV_1000=y # CONFIG_VIA_VELOCITY is not set # CONFIG_TIGON3 is not set # CONFIG_BNX2 is not set +# CONFIG_CNIC is not set CONFIG_FSL_PQ_MDIO=y # CONFIG_GIANFAR is not set CONFIG_UCC_GETH=y # CONFIG_UGETH_MAGIC_PACKET is not set # CONFIG_UGETH_TX_ON_DEMAND is not set +# CONFIG_MV643XX_ETH is not set # CONFIG_QLA3XXX is not set # CONFIG_ATL1 is not set # CONFIG_ATL1E is not set @@ -868,13 +896,17 @@ CONFIG_I2C_MPC=y # CONFIG_SENSORS_PCF8574 is not set # CONFIG_PCF8575 is not set # CONFIG_SENSORS_PCA9539 is not set -# CONFIG_SENSORS_MAX6875 is not set # CONFIG_SENSORS_TSL2550 is not set # CONFIG_I2C_DEBUG_CORE is not set # CONFIG_I2C_DEBUG_ALGO is not set # CONFIG_I2C_DEBUG_BUS is not set # CONFIG_I2C_DEBUG_CHIP is not set # CONFIG_SPI is not set + +# +# PPS support +# +# CONFIG_PPS is not set CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y # CONFIG_GPIOLIB is not set # CONFIG_W1 is not set @@ -929,6 +961,7 @@ CONFIG_HWMON=y # CONFIG_SENSORS_SMSC47B397 is not set # CONFIG_SENSORS_ADS7828 is not set # CONFIG_SENSORS_THMC50 is not set +# CONFIG_SENSORS_TMP401 is not set # CONFIG_SENSORS_VIA686A is not set # CONFIG_SENSORS_VT1211 is not set # CONFIG_SENSORS_VT8231 is not set @@ -977,23 +1010,9 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_MFD_WM8400 is not set # CONFIG_MFD_WM8350_I2C is not set # CONFIG_MFD_PCF50633 is not set +# CONFIG_AB3100_CORE is not set # CONFIG_REGULATOR is not set - -# -# Multimedia devices -# - -# -# Multimedia core support -# -# CONFIG_VIDEO_DEV is not set -# CONFIG_DVB_CORE is not set -# CONFIG_VIDEO_MEDIA is not set - -# -# Multimedia drivers -# -CONFIG_DAB=y +# CONFIG_MEDIA_SUPPORT is not set # # Graphics support @@ -1077,6 +1096,7 @@ CONFIG_RTC_DRV_DS1374=y # CONFIG_RTC_DRV_S35390A is not set # CONFIG_RTC_DRV_FM3130 is not set # CONFIG_RTC_DRV_RX8581 is not set +# CONFIG_RTC_DRV_RX8025 is not set # # SPI RTC drivers @@ -1104,6 +1124,10 @@ CONFIG_RTC_DRV_DS1374=y # CONFIG_DMADEVICES is not set # CONFIG_AUXDISPLAY is not set # CONFIG_UIO is not set + +# +# TI VLYNQ +# # CONFIG_STAGING is not set # @@ -1123,10 +1147,12 @@ CONFIG_FS_MBCACHE=y # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set -CONFIG_FILE_LOCKING=y # CONFIG_XFS_FS is not set +# CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set # CONFIG_BTRFS_FS is not set +CONFIG_FILE_LOCKING=y +CONFIG_FSNOTIFY=y CONFIG_DNOTIFY=y CONFIG_INOTIFY=y CONFIG_INOTIFY_USER=y @@ -1190,6 +1216,7 @@ CONFIG_NFS_FS=y CONFIG_NFS_V3=y # CONFIG_NFS_V3_ACL is not set CONFIG_NFS_V4=y +# CONFIG_NFS_V4_1 is not set CONFIG_ROOT_NFS=y # CONFIG_NFSD is not set CONFIG_LOCKD=y @@ -1247,6 +1274,7 @@ CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y CONFIG_HAVE_LMB=y CONFIG_NLATTR=y +CONFIG_GENERIC_ATOMIC64=y # # Kernel hacking @@ -1272,22 +1300,11 @@ CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y CONFIG_HAVE_DYNAMIC_FTRACE=y CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y CONFIG_TRACING_SUPPORT=y - -# -# Tracers -# -# CONFIG_FUNCTION_TRACER is not set -# CONFIG_SCHED_TRACER is not set -# CONFIG_CONTEXT_SWITCH_TRACER is not set -# CONFIG_EVENT_TRACER is not set -# CONFIG_BOOT_TRACER is not set -# CONFIG_TRACE_BRANCH_PROFILING is not set -# CONFIG_STACK_TRACER is not set -# CONFIG_KMEMTRACE is not set -# CONFIG_WORKQUEUE_TRACER is not set -# CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_FTRACE is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y +# CONFIG_PPC_DISABLE_WERROR is not set +CONFIG_PPC_WERROR=y CONFIG_PRINT_STACK_DEPTH=64 # CONFIG_IRQSTACKS is not set # CONFIG_BOOTX_TEXT is not set diff --git a/arch/powerpc/configs/83xx/mpc836x_rdk_defconfig b/arch/powerpc/configs/83xx/mpc836x_rdk_defconfig index 7f1d1383a24..ff31667a890 100644 --- a/arch/powerpc/configs/83xx/mpc836x_rdk_defconfig +++ b/arch/powerpc/configs/83xx/mpc836x_rdk_defconfig @@ -1,26 +1,28 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.30-rc3 -# Wed May 13 17:22:13 2009 +# Linux kernel version: 2.6.31-rc4 +# Wed Jul 29 23:32:12 2009 # # CONFIG_PPC64 is not set # # Processor support # -CONFIG_6xx=y +CONFIG_PPC_BOOK3S_32=y # CONFIG_PPC_85xx is not set # CONFIG_PPC_8xx is not set # CONFIG_40x is not set # CONFIG_44x is not set # CONFIG_E200 is not set CONFIG_PPC_BOOK3S=y +CONFIG_6xx=y CONFIG_PPC_FPU=y # CONFIG_FSL_EMB_PERFMON is not set # CONFIG_ALTIVEC is not set CONFIG_PPC_STD_MMU=y CONFIG_PPC_STD_MMU_32=y # CONFIG_PPC_MM_SLICES is not set +CONFIG_PPC_HAVE_PMU_SUPPORT=y # CONFIG_SMP is not set CONFIG_PPC32=y CONFIG_WORD_SIZE=32 @@ -31,15 +33,16 @@ CONFIG_GENERIC_TIME=y CONFIG_GENERIC_TIME_VSYSCALL=y CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_GENERIC_HARDIRQS=y +CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set CONFIG_IRQ_PER_CPU=y CONFIG_STACKTRACE_SUPPORT=y CONFIG_HAVE_LATENCYTOP_SUPPORT=y +CONFIG_TRACE_IRQFLAGS_SUPPORT=y CONFIG_LOCKDEP_SUPPORT=y CONFIG_RWSEM_XCHGADD_ALGORITHM=y CONFIG_ARCH_HAS_ILOG2_U32=y CONFIG_GENERIC_HWEIGHT=y -CONFIG_GENERIC_CALIBRATE_DELAY=y CONFIG_GENERIC_FIND_NEXT_BIT=y CONFIG_GENERIC_GPIO=y # CONFIG_ARCH_NO_VIRT_TO_BUS is not set @@ -54,12 +57,14 @@ CONFIG_PPC_UDBG_16550=y # CONFIG_GENERIC_TBSYNC is not set CONFIG_AUDIT_ARCH=y CONFIG_GENERIC_BUG=y +CONFIG_DTC=y CONFIG_DEFAULT_UIMAGE=y CONFIG_ARCH_SUSPEND_POSSIBLE=y # CONFIG_PPC_DCR_NATIVE is not set # CONFIG_PPC_DCR_MMIO is not set CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" +CONFIG_CONSTRUCTORS=y # # General setup @@ -108,7 +113,6 @@ CONFIG_ANON_INODES=y CONFIG_EMBEDDED=y CONFIG_SYSCTL_SYSCALL=y # CONFIG_KALLSYMS is not set -# CONFIG_STRIP_ASM_SYMS is not set CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y @@ -121,9 +125,16 @@ CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y CONFIG_AIO=y +CONFIG_HAVE_PERF_COUNTERS=y + +# +# Performance Counters +# +# CONFIG_PERF_COUNTERS is not set CONFIG_VM_EVENT_COUNTERS=y CONFIG_PCI_QUIRKS=y CONFIG_SLUB_DEBUG=y +# CONFIG_STRIP_ASM_SYMS is not set CONFIG_COMPAT_BRK=y # CONFIG_SLAB is not set CONFIG_SLUB=y @@ -136,6 +147,10 @@ CONFIG_HAVE_IOREMAP_PROT=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_ARCH_TRACEHOOK=y + +# +# GCOV-based kernel profiling +# # CONFIG_SLOW_WORK is not set # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y @@ -148,7 +163,7 @@ CONFIG_MODULE_UNLOAD=y # CONFIG_MODVERSIONS is not set # CONFIG_MODULE_SRCVERSION_ALL is not set CONFIG_BLOCK=y -# CONFIG_LBD is not set +CONFIG_LBDAF=y # CONFIG_BLK_DEV_BSG is not set # CONFIG_BLK_DEV_INTEGRITY is not set @@ -190,6 +205,7 @@ CONFIG_MPC836x_RDK=y # CONFIG_MPC837x_RDB is not set # CONFIG_SBC834x is not set # CONFIG_ASP834x is not set +# CONFIG_KMETER1 is not set # CONFIG_PPC_86xx is not set # CONFIG_EMBEDDED6xx is not set # CONFIG_AMIGAONE is not set @@ -233,6 +249,7 @@ CONFIG_BINFMT_ELF=y # CONFIG_HAVE_AOUT is not set # CONFIG_BINFMT_MISC is not set # CONFIG_IOMMU_HELPER is not set +# CONFIG_SWIOTLB is not set CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y CONFIG_ARCH_HAS_WALK_MEMORY=y CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y @@ -253,9 +270,9 @@ CONFIG_MIGRATION=y CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y -CONFIG_UNEVICTABLE_LRU=y CONFIG_HAVE_MLOCK=y CONFIG_HAVE_MLOCKED_PAGE_BIT=y +CONFIG_DEFAULT_MMAP_MIN_ADDR=4096 CONFIG_PPC_4K_PAGES=y # CONFIG_PPC_16K_PAGES is not set # CONFIG_PPC_64K_PAGES is not set @@ -366,6 +383,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set # CONFIG_PHONET is not set +# CONFIG_IEEE802154 is not set # CONFIG_NET_SCHED is not set # CONFIG_DCB is not set @@ -383,7 +401,11 @@ CONFIG_WIRELESS=y CONFIG_WIRELESS_OLD_REGULATORY=y # CONFIG_WIRELESS_EXT is not set # CONFIG_LIB80211 is not set -# CONFIG_MAC80211 is not set + +# +# CFG80211 needs to be enabled for MAC80211 +# +CONFIG_MAC80211_DEFAULT_PS_VALUE=0 # CONFIG_WIMAX is not set # CONFIG_RFKILL is not set # CONFIG_NET_9P is not set @@ -498,6 +520,7 @@ CONFIG_OF_DEVICE=y CONFIG_OF_GPIO=y CONFIG_OF_I2C=y CONFIG_OF_SPI=y +CONFIG_OF_MDIO=y # CONFIG_PARPORT is not set CONFIG_BLK_DEV=y # CONFIG_BLK_DEV_FD is not set @@ -533,7 +556,9 @@ CONFIG_MISC_DEVICES=y # CONFIG_EEPROM_AT24 is not set # CONFIG_EEPROM_AT25 is not set # CONFIG_EEPROM_LEGACY is not set +# CONFIG_EEPROM_MAX6875 is not set # CONFIG_EEPROM_93CX6 is not set +# CONFIG_CB710_CORE is not set CONFIG_HAVE_IDE=y # CONFIG_IDE is not set @@ -553,14 +578,17 @@ CONFIG_HAVE_IDE=y # # -# Enable only one of the two stacks, unless you know what you are doing +# You can enable one or both FireWire driver stacks. +# + +# +# See the help texts for more information. # # CONFIG_FIREWIRE is not set # CONFIG_IEEE1394 is not set # CONFIG_I2O is not set # CONFIG_MACINTOSH_DRIVERS is not set CONFIG_NETDEVICES=y -CONFIG_COMPAT_NET_DEV_OPS=y # CONFIG_DUMMY is not set # CONFIG_BONDING is not set # CONFIG_MACVLAN is not set @@ -607,11 +635,13 @@ CONFIG_NETDEV_1000=y # CONFIG_VIA_VELOCITY is not set # CONFIG_TIGON3 is not set # CONFIG_BNX2 is not set +# CONFIG_CNIC is not set CONFIG_FSL_PQ_MDIO=y # CONFIG_GIANFAR is not set CONFIG_UCC_GETH=y # CONFIG_UGETH_MAGIC_PACKET is not set # CONFIG_UGETH_TX_ON_DEMAND is not set +# CONFIG_MV643XX_ETH is not set # CONFIG_QLA3XXX is not set # CONFIG_ATL1 is not set # CONFIG_ATL1E is not set @@ -777,7 +807,6 @@ CONFIG_I2C_MPC=y # CONFIG_SENSORS_PCF8574 is not set # CONFIG_PCF8575 is not set # CONFIG_SENSORS_PCA9539 is not set -# CONFIG_SENSORS_MAX6875 is not set # CONFIG_SENSORS_TSL2550 is not set # CONFIG_I2C_DEBUG_CORE is not set # CONFIG_I2C_DEBUG_ALGO is not set @@ -791,13 +820,18 @@ CONFIG_SPI_MASTER=y # CONFIG_SPI_BITBANG=y # CONFIG_SPI_GPIO is not set -CONFIG_SPI_MPC83xx=y +# CONFIG_SPI_MPC8xxx is not set # # SPI Protocol Masters # CONFIG_SPI_SPIDEV=y # CONFIG_SPI_TLE62X0 is not set + +# +# PPS support +# +# CONFIG_PPS is not set CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y CONFIG_ARCH_REQUIRE_GPIOLIB=y CONFIG_GPIOLIB=y @@ -865,23 +899,10 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_MFD_WM8400 is not set # CONFIG_MFD_WM8350_I2C is not set # CONFIG_MFD_PCF50633 is not set +# CONFIG_AB3100_CORE is not set +# CONFIG_EZX_PCAP is not set # CONFIG_REGULATOR is not set - -# -# Multimedia devices -# - -# -# Multimedia core support -# -# CONFIG_VIDEO_DEV is not set -# CONFIG_DVB_CORE is not set -# CONFIG_VIDEO_MEDIA is not set - -# -# Multimedia drivers -# -CONFIG_DAB=y +# CONFIG_MEDIA_SUPPORT is not set # # Graphics support @@ -990,6 +1011,10 @@ CONFIG_HID=y # CONFIG_DMADEVICES is not set # CONFIG_AUXDISPLAY is not set # CONFIG_UIO is not set + +# +# TI VLYNQ +# # CONFIG_STAGING is not set # @@ -1009,10 +1034,12 @@ CONFIG_FS_MBCACHE=y # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set -CONFIG_FILE_LOCKING=y # CONFIG_XFS_FS is not set +# CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set # CONFIG_BTRFS_FS is not set +CONFIG_FILE_LOCKING=y +CONFIG_FSNOTIFY=y CONFIG_DNOTIFY=y CONFIG_INOTIFY=y CONFIG_INOTIFY_USER=y @@ -1086,6 +1113,7 @@ CONFIG_NFS_FS=y CONFIG_NFS_V3=y # CONFIG_NFS_V3_ACL is not set CONFIG_NFS_V4=y +# CONFIG_NFS_V4_1 is not set CONFIG_ROOT_NFS=y # CONFIG_NFSD is not set CONFIG_LOCKD=y @@ -1145,6 +1173,7 @@ CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y CONFIG_HAVE_LMB=y CONFIG_NLATTR=y +CONFIG_GENERIC_ATOMIC64=y # # Kernel hacking @@ -1170,22 +1199,11 @@ CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y CONFIG_HAVE_DYNAMIC_FTRACE=y CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y CONFIG_TRACING_SUPPORT=y - -# -# Tracers -# -# CONFIG_FUNCTION_TRACER is not set -# CONFIG_SCHED_TRACER is not set -# CONFIG_CONTEXT_SWITCH_TRACER is not set -# CONFIG_EVENT_TRACER is not set -# CONFIG_BOOT_TRACER is not set -# CONFIG_TRACE_BRANCH_PROFILING is not set -# CONFIG_STACK_TRACER is not set -# CONFIG_KMEMTRACE is not set -# CONFIG_WORKQUEUE_TRACER is not set -# CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_FTRACE is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y +# CONFIG_PPC_DISABLE_WERROR is not set +CONFIG_PPC_WERROR=y CONFIG_PRINT_STACK_DEPTH=64 # CONFIG_IRQSTACKS is not set # CONFIG_BOOTX_TEXT is not set diff --git a/arch/powerpc/configs/83xx/mpc837x_mds_defconfig b/arch/powerpc/configs/83xx/mpc837x_mds_defconfig index bf636fd560a..e285ec0fe95 100644 --- a/arch/powerpc/configs/83xx/mpc837x_mds_defconfig +++ b/arch/powerpc/configs/83xx/mpc837x_mds_defconfig @@ -1,26 +1,28 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.30-rc3 -# Wed May 13 17:22:12 2009 +# Linux kernel version: 2.6.31-rc4 +# Wed Jul 29 23:32:11 2009 # # CONFIG_PPC64 is not set # # Processor support # -CONFIG_6xx=y +CONFIG_PPC_BOOK3S_32=y # CONFIG_PPC_85xx is not set # CONFIG_PPC_8xx is not set # CONFIG_40x is not set # CONFIG_44x is not set # CONFIG_E200 is not set CONFIG_PPC_BOOK3S=y +CONFIG_6xx=y CONFIG_PPC_FPU=y # CONFIG_FSL_EMB_PERFMON is not set # CONFIG_ALTIVEC is not set CONFIG_PPC_STD_MMU=y CONFIG_PPC_STD_MMU_32=y # CONFIG_PPC_MM_SLICES is not set +CONFIG_PPC_HAVE_PMU_SUPPORT=y # CONFIG_SMP is not set CONFIG_PPC32=y CONFIG_WORD_SIZE=32 @@ -31,15 +33,16 @@ CONFIG_GENERIC_TIME=y CONFIG_GENERIC_TIME_VSYSCALL=y CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_GENERIC_HARDIRQS=y +CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set CONFIG_IRQ_PER_CPU=y CONFIG_STACKTRACE_SUPPORT=y CONFIG_HAVE_LATENCYTOP_SUPPORT=y +CONFIG_TRACE_IRQFLAGS_SUPPORT=y CONFIG_LOCKDEP_SUPPORT=y CONFIG_RWSEM_XCHGADD_ALGORITHM=y CONFIG_ARCH_HAS_ILOG2_U32=y CONFIG_GENERIC_HWEIGHT=y -CONFIG_GENERIC_CALIBRATE_DELAY=y CONFIG_GENERIC_FIND_NEXT_BIT=y # CONFIG_ARCH_NO_VIRT_TO_BUS is not set CONFIG_PPC=y @@ -53,12 +56,14 @@ CONFIG_PPC_UDBG_16550=y # CONFIG_GENERIC_TBSYNC is not set CONFIG_AUDIT_ARCH=y CONFIG_GENERIC_BUG=y +CONFIG_DTC=y CONFIG_DEFAULT_UIMAGE=y CONFIG_ARCH_SUSPEND_POSSIBLE=y # CONFIG_PPC_DCR_NATIVE is not set # CONFIG_PPC_DCR_MMIO is not set CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" +CONFIG_CONSTRUCTORS=y # # General setup @@ -108,7 +113,6 @@ CONFIG_EMBEDDED=y CONFIG_SYSCTL_SYSCALL=y CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_EXTRA_PASS is not set -# CONFIG_STRIP_ASM_SYMS is not set CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y @@ -121,8 +125,15 @@ CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y CONFIG_AIO=y +CONFIG_HAVE_PERF_COUNTERS=y + +# +# Performance Counters +# +# CONFIG_PERF_COUNTERS is not set CONFIG_VM_EVENT_COUNTERS=y CONFIG_PCI_QUIRKS=y +# CONFIG_STRIP_ASM_SYMS is not set CONFIG_COMPAT_BRK=y CONFIG_SLAB=y # CONFIG_SLUB is not set @@ -136,6 +147,10 @@ CONFIG_HAVE_IOREMAP_PROT=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_ARCH_TRACEHOOK=y + +# +# GCOV-based kernel profiling +# # CONFIG_SLOW_WORK is not set # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y @@ -148,7 +163,7 @@ CONFIG_MODULE_UNLOAD=y # CONFIG_MODVERSIONS is not set # CONFIG_MODULE_SRCVERSION_ALL is not set CONFIG_BLOCK=y -# CONFIG_LBD is not set +CONFIG_LBDAF=y # CONFIG_BLK_DEV_BSG is not set # CONFIG_BLK_DEV_INTEGRITY is not set @@ -190,6 +205,7 @@ CONFIG_MPC837x_MDS=y # CONFIG_MPC837x_RDB is not set # CONFIG_SBC834x is not set # CONFIG_ASP834x is not set +# CONFIG_KMETER1 is not set CONFIG_PPC_MPC837x=y # CONFIG_PPC_86xx is not set # CONFIG_EMBEDDED6xx is not set @@ -234,6 +250,7 @@ CONFIG_BINFMT_ELF=y # CONFIG_HAVE_AOUT is not set # CONFIG_BINFMT_MISC is not set # CONFIG_IOMMU_HELPER is not set +# CONFIG_SWIOTLB is not set CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y CONFIG_ARCH_HAS_WALK_MEMORY=y CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y @@ -254,9 +271,9 @@ CONFIG_MIGRATION=y CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y -CONFIG_UNEVICTABLE_LRU=y CONFIG_HAVE_MLOCK=y CONFIG_HAVE_MLOCKED_PAGE_BIT=y +CONFIG_DEFAULT_MMAP_MIN_ADDR=4096 CONFIG_PPC_4K_PAGES=y # CONFIG_PPC_16K_PAGES is not set # CONFIG_PPC_64K_PAGES is not set @@ -365,6 +382,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set # CONFIG_PHONET is not set +# CONFIG_IEEE802154 is not set # CONFIG_NET_SCHED is not set # CONFIG_DCB is not set @@ -382,7 +400,11 @@ CONFIG_WIRELESS=y CONFIG_WIRELESS_OLD_REGULATORY=y # CONFIG_WIRELESS_EXT is not set # CONFIG_LIB80211 is not set -# CONFIG_MAC80211 is not set + +# +# CFG80211 needs to be enabled for MAC80211 +# +CONFIG_MAC80211_DEFAULT_PS_VALUE=0 # CONFIG_WIMAX is not set # CONFIG_RFKILL is not set # CONFIG_NET_9P is not set @@ -403,6 +425,7 @@ CONFIG_PREVENT_FIRMWARE_BUILD=y # CONFIG_MTD is not set CONFIG_OF_DEVICE=y CONFIG_OF_I2C=y +CONFIG_OF_MDIO=y # CONFIG_PARPORT is not set CONFIG_BLK_DEV=y # CONFIG_BLK_DEV_FD is not set @@ -437,7 +460,9 @@ CONFIG_MISC_DEVICES=y # # CONFIG_EEPROM_AT24 is not set # CONFIG_EEPROM_LEGACY is not set +# CONFIG_EEPROM_MAX6875 is not set # CONFIG_EEPROM_93CX6 is not set +# CONFIG_CB710_CORE is not set CONFIG_HAVE_IDE=y # CONFIG_IDE is not set @@ -460,10 +485,6 @@ CONFIG_BLK_DEV_SD=y # CONFIG_BLK_DEV_SR is not set CONFIG_CHR_DEV_SG=y # CONFIG_CHR_DEV_SCH is not set - -# -# Some SCSI devices (e.g. CD jukebox) support multiple LUNs -# # CONFIG_SCSI_MULTI_LUN is not set # CONFIG_SCSI_CONSTANTS is not set # CONFIG_SCSI_LOGGING is not set @@ -481,6 +502,7 @@ CONFIG_SCSI_WAIT_SCAN=m CONFIG_SCSI_LOWLEVEL=y # CONFIG_ISCSI_TCP is not set # CONFIG_SCSI_CXGB3_ISCSI is not set +# CONFIG_SCSI_BNX2_ISCSI is not set # CONFIG_BLK_DEV_3W_XXXX_RAID is not set # CONFIG_SCSI_3W_9XXX is not set # CONFIG_SCSI_ACARD is not set @@ -489,6 +511,7 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_SCSI_AIC7XXX_OLD is not set # CONFIG_SCSI_AIC79XX is not set # CONFIG_SCSI_AIC94XX is not set +# CONFIG_SCSI_MVSAS is not set # CONFIG_SCSI_DPT_I2O is not set # CONFIG_SCSI_ADVANSYS is not set # CONFIG_SCSI_ARCMSR is not set @@ -508,7 +531,6 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_SCSI_IPS is not set # CONFIG_SCSI_INITIO is not set # CONFIG_SCSI_INIA100 is not set -# CONFIG_SCSI_MVSAS is not set # CONFIG_SCSI_STEX is not set # CONFIG_SCSI_SYM53C8XX_2 is not set # CONFIG_SCSI_IPR is not set @@ -592,14 +614,17 @@ CONFIG_ATA_SFF=y # # -# Enable only one of the two stacks, unless you know what you are doing +# You can enable one or both FireWire driver stacks. +# + +# +# See the help texts for more information. # # CONFIG_FIREWIRE is not set # CONFIG_IEEE1394 is not set # CONFIG_I2O is not set # CONFIG_MACINTOSH_DRIVERS is not set CONFIG_NETDEVICES=y -CONFIG_COMPAT_NET_DEV_OPS=y # CONFIG_DUMMY is not set # CONFIG_BONDING is not set # CONFIG_MACVLAN is not set @@ -646,6 +671,7 @@ CONFIG_MII=y # CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set # CONFIG_NET_PCI is not set # CONFIG_B44 is not set +# CONFIG_KS8842 is not set # CONFIG_ATL2 is not set CONFIG_NETDEV_1000=y # CONFIG_ACENIC is not set @@ -665,8 +691,10 @@ CONFIG_NETDEV_1000=y # CONFIG_VIA_VELOCITY is not set # CONFIG_TIGON3 is not set # CONFIG_BNX2 is not set +# CONFIG_CNIC is not set CONFIG_FSL_PQ_MDIO=y CONFIG_GIANFAR=y +# CONFIG_MV643XX_ETH is not set # CONFIG_QLA3XXX is not set # CONFIG_ATL1 is not set # CONFIG_ATL1E is not set @@ -844,13 +872,17 @@ CONFIG_I2C_MPC=y # CONFIG_SENSORS_PCF8574 is not set # CONFIG_PCF8575 is not set # CONFIG_SENSORS_PCA9539 is not set -# CONFIG_SENSORS_MAX6875 is not set # CONFIG_SENSORS_TSL2550 is not set # CONFIG_I2C_DEBUG_CORE is not set # CONFIG_I2C_DEBUG_ALGO is not set # CONFIG_I2C_DEBUG_BUS is not set # CONFIG_I2C_DEBUG_CHIP is not set # CONFIG_SPI is not set + +# +# PPS support +# +# CONFIG_PPS is not set CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y # CONFIG_GPIOLIB is not set # CONFIG_W1 is not set @@ -905,6 +937,7 @@ CONFIG_HWMON=y # CONFIG_SENSORS_SMSC47B397 is not set # CONFIG_SENSORS_ADS7828 is not set # CONFIG_SENSORS_THMC50 is not set +# CONFIG_SENSORS_TMP401 is not set # CONFIG_SENSORS_VIA686A is not set # CONFIG_SENSORS_VT1211 is not set # CONFIG_SENSORS_VT8231 is not set @@ -953,23 +986,9 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_MFD_WM8400 is not set # CONFIG_MFD_WM8350_I2C is not set # CONFIG_MFD_PCF50633 is not set +# CONFIG_AB3100_CORE is not set # CONFIG_REGULATOR is not set - -# -# Multimedia devices -# - -# -# Multimedia core support -# -# CONFIG_VIDEO_DEV is not set -# CONFIG_DVB_CORE is not set -# CONFIG_VIDEO_MEDIA is not set - -# -# Multimedia drivers -# -CONFIG_DAB=y +# CONFIG_MEDIA_SUPPORT is not set # # Graphics support @@ -1026,6 +1045,10 @@ CONFIG_USB_ARCH_HAS_EHCI=y # CONFIG_DMADEVICES is not set # CONFIG_AUXDISPLAY is not set # CONFIG_UIO is not set + +# +# TI VLYNQ +# # CONFIG_STAGING is not set # @@ -1045,10 +1068,12 @@ CONFIG_FS_MBCACHE=y # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set -CONFIG_FILE_LOCKING=y # CONFIG_XFS_FS is not set +# CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set # CONFIG_BTRFS_FS is not set +CONFIG_FILE_LOCKING=y +CONFIG_FSNOTIFY=y CONFIG_DNOTIFY=y CONFIG_INOTIFY=y CONFIG_INOTIFY_USER=y @@ -1111,6 +1136,7 @@ CONFIG_NFS_FS=y CONFIG_NFS_V3=y # CONFIG_NFS_V3_ACL is not set CONFIG_NFS_V4=y +# CONFIG_NFS_V4_1 is not set CONFIG_ROOT_NFS=y # CONFIG_NFSD is not set CONFIG_LOCKD=y @@ -1170,6 +1196,7 @@ CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y CONFIG_HAVE_LMB=y CONFIG_NLATTR=y +CONFIG_GENERIC_ATOMIC64=y # # Kernel hacking @@ -1193,22 +1220,11 @@ CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y CONFIG_HAVE_DYNAMIC_FTRACE=y CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y CONFIG_TRACING_SUPPORT=y - -# -# Tracers -# -# CONFIG_FUNCTION_TRACER is not set -# CONFIG_SCHED_TRACER is not set -# CONFIG_CONTEXT_SWITCH_TRACER is not set -# CONFIG_EVENT_TRACER is not set -# CONFIG_BOOT_TRACER is not set -# CONFIG_TRACE_BRANCH_PROFILING is not set -# CONFIG_STACK_TRACER is not set -# CONFIG_KMEMTRACE is not set -# CONFIG_WORKQUEUE_TRACER is not set -# CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_FTRACE is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y +# CONFIG_PPC_DISABLE_WERROR is not set +CONFIG_PPC_WERROR=y CONFIG_PRINT_STACK_DEPTH=64 # CONFIG_IRQSTACKS is not set # CONFIG_BOOTX_TEXT is not set diff --git a/arch/powerpc/configs/83xx/mpc837x_rdb_defconfig b/arch/powerpc/configs/83xx/mpc837x_rdb_defconfig index fe6454eacbd..1ab3e4cd301 100644 --- a/arch/powerpc/configs/83xx/mpc837x_rdb_defconfig +++ b/arch/powerpc/configs/83xx/mpc837x_rdb_defconfig @@ -1,26 +1,28 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.30-rc3 -# Wed May 13 17:22:14 2009 +# Linux kernel version: 2.6.31-rc4 +# Wed Jul 29 23:32:13 2009 # # CONFIG_PPC64 is not set # # Processor support # -CONFIG_6xx=y +CONFIG_PPC_BOOK3S_32=y # CONFIG_PPC_85xx is not set # CONFIG_PPC_8xx is not set # CONFIG_40x is not set # CONFIG_44x is not set # CONFIG_E200 is not set CONFIG_PPC_BOOK3S=y +CONFIG_6xx=y CONFIG_PPC_FPU=y # CONFIG_FSL_EMB_PERFMON is not set # CONFIG_ALTIVEC is not set CONFIG_PPC_STD_MMU=y CONFIG_PPC_STD_MMU_32=y # CONFIG_PPC_MM_SLICES is not set +CONFIG_PPC_HAVE_PMU_SUPPORT=y # CONFIG_SMP is not set CONFIG_PPC32=y CONFIG_WORD_SIZE=32 @@ -31,15 +33,16 @@ CONFIG_GENERIC_TIME=y CONFIG_GENERIC_TIME_VSYSCALL=y CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_GENERIC_HARDIRQS=y +CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set CONFIG_IRQ_PER_CPU=y CONFIG_STACKTRACE_SUPPORT=y CONFIG_HAVE_LATENCYTOP_SUPPORT=y +CONFIG_TRACE_IRQFLAGS_SUPPORT=y CONFIG_LOCKDEP_SUPPORT=y CONFIG_RWSEM_XCHGADD_ALGORITHM=y CONFIG_ARCH_HAS_ILOG2_U32=y CONFIG_GENERIC_HWEIGHT=y -CONFIG_GENERIC_CALIBRATE_DELAY=y CONFIG_GENERIC_FIND_NEXT_BIT=y # CONFIG_ARCH_NO_VIRT_TO_BUS is not set CONFIG_PPC=y @@ -53,12 +56,14 @@ CONFIG_PPC_UDBG_16550=y # CONFIG_GENERIC_TBSYNC is not set CONFIG_AUDIT_ARCH=y CONFIG_GENERIC_BUG=y +CONFIG_DTC=y CONFIG_DEFAULT_UIMAGE=y CONFIG_ARCH_SUSPEND_POSSIBLE=y # CONFIG_PPC_DCR_NATIVE is not set # CONFIG_PPC_DCR_MMIO is not set CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" +CONFIG_CONSTRUCTORS=y # # General setup @@ -108,7 +113,6 @@ CONFIG_EMBEDDED=y CONFIG_SYSCTL_SYSCALL=y CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_EXTRA_PASS is not set -# CONFIG_STRIP_ASM_SYMS is not set CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y @@ -121,8 +125,15 @@ CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y CONFIG_AIO=y +CONFIG_HAVE_PERF_COUNTERS=y + +# +# Performance Counters +# +# CONFIG_PERF_COUNTERS is not set CONFIG_VM_EVENT_COUNTERS=y CONFIG_PCI_QUIRKS=y +# CONFIG_STRIP_ASM_SYMS is not set CONFIG_COMPAT_BRK=y CONFIG_SLAB=y # CONFIG_SLUB is not set @@ -136,6 +147,10 @@ CONFIG_HAVE_IOREMAP_PROT=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_ARCH_TRACEHOOK=y + +# +# GCOV-based kernel profiling +# # CONFIG_SLOW_WORK is not set # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y @@ -148,7 +163,7 @@ CONFIG_MODULE_UNLOAD=y # CONFIG_MODVERSIONS is not set # CONFIG_MODULE_SRCVERSION_ALL is not set CONFIG_BLOCK=y -# CONFIG_LBD is not set +CONFIG_LBDAF=y # CONFIG_BLK_DEV_BSG is not set # CONFIG_BLK_DEV_INTEGRITY is not set @@ -190,6 +205,7 @@ CONFIG_PPC_83xx=y CONFIG_MPC837x_RDB=y # CONFIG_SBC834x is not set # CONFIG_ASP834x is not set +# CONFIG_KMETER1 is not set CONFIG_PPC_MPC837x=y # CONFIG_PPC_86xx is not set # CONFIG_EMBEDDED6xx is not set @@ -234,6 +250,7 @@ CONFIG_BINFMT_ELF=y # CONFIG_HAVE_AOUT is not set # CONFIG_BINFMT_MISC is not set # CONFIG_IOMMU_HELPER is not set +# CONFIG_SWIOTLB is not set CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y CONFIG_ARCH_HAS_WALK_MEMORY=y CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y @@ -254,9 +271,9 @@ CONFIG_MIGRATION=y CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y -CONFIG_UNEVICTABLE_LRU=y CONFIG_HAVE_MLOCK=y CONFIG_HAVE_MLOCKED_PAGE_BIT=y +CONFIG_DEFAULT_MMAP_MIN_ADDR=4096 CONFIG_PPC_4K_PAGES=y # CONFIG_PPC_16K_PAGES is not set # CONFIG_PPC_64K_PAGES is not set @@ -360,6 +377,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set # CONFIG_PHONET is not set +# CONFIG_IEEE802154 is not set # CONFIG_NET_SCHED is not set # CONFIG_DCB is not set @@ -377,7 +395,11 @@ CONFIG_WIRELESS=y CONFIG_WIRELESS_OLD_REGULATORY=y # CONFIG_WIRELESS_EXT is not set # CONFIG_LIB80211 is not set -# CONFIG_MAC80211 is not set + +# +# CFG80211 needs to be enabled for MAC80211 +# +CONFIG_MAC80211_DEFAULT_PS_VALUE=0 # CONFIG_WIMAX is not set # CONFIG_RFKILL is not set # CONFIG_NET_9P is not set @@ -398,6 +420,7 @@ CONFIG_PREVENT_FIRMWARE_BUILD=y # CONFIG_MTD is not set CONFIG_OF_DEVICE=y CONFIG_OF_I2C=y +CONFIG_OF_MDIO=y # CONFIG_PARPORT is not set CONFIG_BLK_DEV=y # CONFIG_BLK_DEV_FD is not set @@ -433,7 +456,9 @@ CONFIG_MISC_DEVICES=y # # CONFIG_EEPROM_AT24 is not set # CONFIG_EEPROM_LEGACY is not set +# CONFIG_EEPROM_MAX6875 is not set # CONFIG_EEPROM_93CX6 is not set +# CONFIG_CB710_CORE is not set CONFIG_HAVE_IDE=y # CONFIG_IDE is not set @@ -456,10 +481,6 @@ CONFIG_BLK_DEV_SD=y # CONFIG_BLK_DEV_SR is not set CONFIG_CHR_DEV_SG=y # CONFIG_CHR_DEV_SCH is not set - -# -# Some SCSI devices (e.g. CD jukebox) support multiple LUNs -# # CONFIG_SCSI_MULTI_LUN is not set # CONFIG_SCSI_CONSTANTS is not set # CONFIG_SCSI_LOGGING is not set @@ -476,6 +497,7 @@ CONFIG_SCSI_WAIT_SCAN=m # CONFIG_SCSI_SRP_ATTRS is not set CONFIG_SCSI_LOWLEVEL=y # CONFIG_ISCSI_TCP is not set +# CONFIG_SCSI_BNX2_ISCSI is not set # CONFIG_BLK_DEV_3W_XXXX_RAID is not set # CONFIG_SCSI_3W_9XXX is not set # CONFIG_SCSI_ACARD is not set @@ -484,6 +506,7 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_SCSI_AIC7XXX_OLD is not set # CONFIG_SCSI_AIC79XX is not set # CONFIG_SCSI_AIC94XX is not set +# CONFIG_SCSI_MVSAS is not set # CONFIG_SCSI_DPT_I2O is not set # CONFIG_SCSI_ADVANSYS is not set # CONFIG_SCSI_ARCMSR is not set @@ -503,7 +526,6 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_SCSI_IPS is not set # CONFIG_SCSI_INITIO is not set # CONFIG_SCSI_INIA100 is not set -# CONFIG_SCSI_MVSAS is not set # CONFIG_SCSI_STEX is not set # CONFIG_SCSI_SYM53C8XX_2 is not set # CONFIG_SCSI_IPR is not set @@ -598,14 +620,17 @@ CONFIG_MD_RAID6_PQ=y # # -# Enable only one of the two stacks, unless you know what you are doing +# You can enable one or both FireWire driver stacks. +# + +# +# See the help texts for more information. # # CONFIG_FIREWIRE is not set # CONFIG_IEEE1394 is not set # CONFIG_I2O is not set # CONFIG_MACINTOSH_DRIVERS is not set CONFIG_NETDEVICES=y -CONFIG_COMPAT_NET_DEV_OPS=y # CONFIG_DUMMY is not set # CONFIG_BONDING is not set # CONFIG_MACVLAN is not set @@ -652,6 +677,7 @@ CONFIG_MII=y # CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set # CONFIG_NET_PCI is not set # CONFIG_B44 is not set +# CONFIG_KS8842 is not set # CONFIG_ATL2 is not set CONFIG_NETDEV_1000=y # CONFIG_ACENIC is not set @@ -671,8 +697,10 @@ CONFIG_NETDEV_1000=y # CONFIG_VIA_VELOCITY is not set # CONFIG_TIGON3 is not set # CONFIG_BNX2 is not set +# CONFIG_CNIC is not set CONFIG_FSL_PQ_MDIO=y CONFIG_GIANFAR=y +# CONFIG_MV643XX_ETH is not set # CONFIG_QLA3XXX is not set # CONFIG_ATL1 is not set # CONFIG_ATL1E is not set @@ -842,13 +870,17 @@ CONFIG_I2C_MPC=y # CONFIG_SENSORS_PCF8574 is not set # CONFIG_PCF8575 is not set # CONFIG_SENSORS_PCA9539 is not set -# CONFIG_SENSORS_MAX6875 is not set # CONFIG_SENSORS_TSL2550 is not set # CONFIG_I2C_DEBUG_CORE is not set # CONFIG_I2C_DEBUG_ALGO is not set # CONFIG_I2C_DEBUG_BUS is not set # CONFIG_I2C_DEBUG_CHIP is not set # CONFIG_SPI is not set + +# +# PPS support +# +# CONFIG_PPS is not set CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y # CONFIG_GPIOLIB is not set # CONFIG_W1 is not set @@ -903,6 +935,7 @@ CONFIG_HWMON=y # CONFIG_SENSORS_SMSC47B397 is not set # CONFIG_SENSORS_ADS7828 is not set # CONFIG_SENSORS_THMC50 is not set +# CONFIG_SENSORS_TMP401 is not set # CONFIG_SENSORS_VIA686A is not set # CONFIG_SENSORS_VT1211 is not set # CONFIG_SENSORS_VT8231 is not set @@ -956,24 +989,9 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_MFD_WM8400 is not set # CONFIG_MFD_WM8350_I2C is not set # CONFIG_MFD_PCF50633 is not set +# CONFIG_AB3100_CORE is not set # CONFIG_REGULATOR is not set - -# -# Multimedia devices -# - -# -# Multimedia core support -# -# CONFIG_VIDEO_DEV is not set -# CONFIG_DVB_CORE is not set -# CONFIG_VIDEO_MEDIA is not set - -# -# Multimedia drivers -# -CONFIG_DAB=y -# CONFIG_USB_DABUSB is not set +# CONFIG_MEDIA_SUPPORT is not set # # Graphics support @@ -1011,7 +1029,7 @@ CONFIG_HID_BELKIN=y CONFIG_HID_CHERRY=y CONFIG_HID_CHICONY=y CONFIG_HID_CYPRESS=y -# CONFIG_DRAGONRISE_FF is not set +# CONFIG_HID_DRAGONRISE is not set CONFIG_HID_EZKEY=y # CONFIG_HID_KYE is not set CONFIG_HID_GYRATION=y @@ -1028,10 +1046,11 @@ CONFIG_HID_PETALYNX=y CONFIG_HID_SAMSUNG=y CONFIG_HID_SONY=y CONFIG_HID_SUNPLUS=y -# CONFIG_GREENASIA_FF is not set +# CONFIG_HID_GREENASIA is not set +# CONFIG_HID_SMARTJOYPLUS is not set # CONFIG_HID_TOPSEED is not set -CONFIG_THRUSTMASTER_FF=m -CONFIG_ZEROPLUS_FF=m +# CONFIG_HID_THRUSTMASTER is not set +# CONFIG_HID_ZEROPLUS is not set CONFIG_USB_SUPPORT=y CONFIG_USB_ARCH_HAS_HCD=y CONFIG_USB_ARCH_HAS_OHCI=y @@ -1057,6 +1076,7 @@ CONFIG_USB_MON=y # USB Host Controller Drivers # # CONFIG_USB_C67X00_HCD is not set +# CONFIG_USB_XHCI_HCD is not set CONFIG_USB_EHCI_HCD=y CONFIG_USB_EHCI_ROOT_HUB_TT=y # CONFIG_USB_EHCI_TT_NEWSCHED is not set @@ -1141,6 +1161,10 @@ CONFIG_USB_EHCI_HCD_PPC_OF=y # CONFIG_DMADEVICES is not set # CONFIG_AUXDISPLAY is not set # CONFIG_UIO is not set + +# +# TI VLYNQ +# # CONFIG_STAGING is not set # @@ -1160,10 +1184,12 @@ CONFIG_FS_MBCACHE=y # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set -CONFIG_FILE_LOCKING=y # CONFIG_XFS_FS is not set +# CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set # CONFIG_BTRFS_FS is not set +CONFIG_FILE_LOCKING=y +CONFIG_FSNOTIFY=y CONFIG_DNOTIFY=y CONFIG_INOTIFY=y CONFIG_INOTIFY_USER=y @@ -1226,6 +1252,7 @@ CONFIG_NFS_FS=y CONFIG_NFS_V3=y # CONFIG_NFS_V3_ACL is not set CONFIG_NFS_V4=y +# CONFIG_NFS_V4_1 is not set CONFIG_ROOT_NFS=y # CONFIG_NFSD is not set CONFIG_LOCKD=y @@ -1262,7 +1289,46 @@ CONFIG_MSDOS_PARTITION=y # CONFIG_KARMA_PARTITION is not set # CONFIG_EFI_PARTITION is not set # CONFIG_SYSV68_PARTITION is not set -# CONFIG_NLS is not set +CONFIG_NLS=y +CONFIG_NLS_DEFAULT="iso8859-1" +# CONFIG_NLS_CODEPAGE_437 is not set +# CONFIG_NLS_CODEPAGE_737 is not set +# CONFIG_NLS_CODEPAGE_775 is not set +# CONFIG_NLS_CODEPAGE_850 is not set +# CONFIG_NLS_CODEPAGE_852 is not set +# CONFIG_NLS_CODEPAGE_855 is not set +# CONFIG_NLS_CODEPAGE_857 is not set +# CONFIG_NLS_CODEPAGE_860 is not set +# CONFIG_NLS_CODEPAGE_861 is not set +# CONFIG_NLS_CODEPAGE_862 is not set +# CONFIG_NLS_CODEPAGE_863 is not set +# CONFIG_NLS_CODEPAGE_864 is not set +# CONFIG_NLS_CODEPAGE_865 is not set +# CONFIG_NLS_CODEPAGE_866 is not set +# CONFIG_NLS_CODEPAGE_869 is not set +# CONFIG_NLS_CODEPAGE_936 is not set +# CONFIG_NLS_CODEPAGE_950 is not set +# CONFIG_NLS_CODEPAGE_932 is not set +# CONFIG_NLS_CODEPAGE_949 is not set +# CONFIG_NLS_CODEPAGE_874 is not set +# CONFIG_NLS_ISO8859_8 is not set +# CONFIG_NLS_CODEPAGE_1250 is not set +# CONFIG_NLS_CODEPAGE_1251 is not set +# CONFIG_NLS_ASCII is not set +# CONFIG_NLS_ISO8859_1 is not set +# CONFIG_NLS_ISO8859_2 is not set +# CONFIG_NLS_ISO8859_3 is not set +# CONFIG_NLS_ISO8859_4 is not set +# CONFIG_NLS_ISO8859_5 is not set +# CONFIG_NLS_ISO8859_6 is not set +# CONFIG_NLS_ISO8859_7 is not set +# CONFIG_NLS_ISO8859_9 is not set +# CONFIG_NLS_ISO8859_13 is not set +# CONFIG_NLS_ISO8859_14 is not set +# CONFIG_NLS_ISO8859_15 is not set +# CONFIG_NLS_KOI8_R is not set +# CONFIG_NLS_KOI8_U is not set +# CONFIG_NLS_UTF8 is not set # CONFIG_DLM is not set # CONFIG_BINARY_PRINTF is not set @@ -1285,6 +1351,7 @@ CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y CONFIG_HAVE_LMB=y CONFIG_NLATTR=y +CONFIG_GENERIC_ATOMIC64=y # # Kernel hacking @@ -1308,22 +1375,11 @@ CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y CONFIG_HAVE_DYNAMIC_FTRACE=y CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y CONFIG_TRACING_SUPPORT=y - -# -# Tracers -# -# CONFIG_FUNCTION_TRACER is not set -# CONFIG_SCHED_TRACER is not set -# CONFIG_CONTEXT_SWITCH_TRACER is not set -# CONFIG_EVENT_TRACER is not set -# CONFIG_BOOT_TRACER is not set -# CONFIG_TRACE_BRANCH_PROFILING is not set -# CONFIG_STACK_TRACER is not set -# CONFIG_KMEMTRACE is not set -# CONFIG_WORKQUEUE_TRACER is not set -# CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_FTRACE is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y +# CONFIG_PPC_DISABLE_WERROR is not set +CONFIG_PPC_WERROR=y CONFIG_PRINT_STACK_DEPTH=64 # CONFIG_IRQSTACKS is not set # CONFIG_BOOTX_TEXT is not set diff --git a/arch/powerpc/configs/83xx/sbc834x_defconfig b/arch/powerpc/configs/83xx/sbc834x_defconfig index fe08f672cb2..a592b5efdc4 100644 --- a/arch/powerpc/configs/83xx/sbc834x_defconfig +++ b/arch/powerpc/configs/83xx/sbc834x_defconfig @@ -1,26 +1,28 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.30-rc3 -# Wed May 13 17:22:15 2009 +# Linux kernel version: 2.6.31-rc4 +# Wed Jul 29 23:32:13 2009 # # CONFIG_PPC64 is not set # # Processor support # -CONFIG_6xx=y +CONFIG_PPC_BOOK3S_32=y # CONFIG_PPC_85xx is not set # CONFIG_PPC_8xx is not set # CONFIG_40x is not set # CONFIG_44x is not set # CONFIG_E200 is not set CONFIG_PPC_BOOK3S=y +CONFIG_6xx=y CONFIG_PPC_FPU=y # CONFIG_FSL_EMB_PERFMON is not set # CONFIG_ALTIVEC is not set CONFIG_PPC_STD_MMU=y CONFIG_PPC_STD_MMU_32=y # CONFIG_PPC_MM_SLICES is not set +CONFIG_PPC_HAVE_PMU_SUPPORT=y # CONFIG_SMP is not set CONFIG_PPC32=y CONFIG_WORD_SIZE=32 @@ -31,15 +33,16 @@ CONFIG_GENERIC_TIME=y CONFIG_GENERIC_TIME_VSYSCALL=y CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_GENERIC_HARDIRQS=y +CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set CONFIG_IRQ_PER_CPU=y CONFIG_STACKTRACE_SUPPORT=y CONFIG_HAVE_LATENCYTOP_SUPPORT=y +CONFIG_TRACE_IRQFLAGS_SUPPORT=y CONFIG_LOCKDEP_SUPPORT=y CONFIG_RWSEM_XCHGADD_ALGORITHM=y CONFIG_ARCH_HAS_ILOG2_U32=y CONFIG_GENERIC_HWEIGHT=y -CONFIG_GENERIC_CALIBRATE_DELAY=y CONFIG_GENERIC_FIND_NEXT_BIT=y # CONFIG_ARCH_NO_VIRT_TO_BUS is not set CONFIG_PPC=y @@ -53,12 +56,14 @@ CONFIG_PPC_UDBG_16550=y # CONFIG_GENERIC_TBSYNC is not set CONFIG_AUDIT_ARCH=y CONFIG_GENERIC_BUG=y +CONFIG_DTC=y CONFIG_DEFAULT_UIMAGE=y CONFIG_ARCH_SUSPEND_POSSIBLE=y # CONFIG_PPC_DCR_NATIVE is not set # CONFIG_PPC_DCR_MMIO is not set CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" +CONFIG_CONSTRUCTORS=y # # General setup @@ -107,7 +112,6 @@ CONFIG_ANON_INODES=y CONFIG_EMBEDDED=y CONFIG_SYSCTL_SYSCALL=y # CONFIG_KALLSYMS is not set -# CONFIG_STRIP_ASM_SYMS is not set CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y @@ -120,8 +124,15 @@ CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y CONFIG_AIO=y +CONFIG_HAVE_PERF_COUNTERS=y + +# +# Performance Counters +# +# CONFIG_PERF_COUNTERS is not set CONFIG_VM_EVENT_COUNTERS=y CONFIG_PCI_QUIRKS=y +# CONFIG_STRIP_ASM_SYMS is not set CONFIG_COMPAT_BRK=y CONFIG_SLAB=y # CONFIG_SLUB is not set @@ -134,6 +145,10 @@ CONFIG_HAVE_IOREMAP_PROT=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_ARCH_TRACEHOOK=y + +# +# GCOV-based kernel profiling +# # CONFIG_SLOW_WORK is not set # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y @@ -146,7 +161,7 @@ CONFIG_MODULE_UNLOAD=y # CONFIG_MODVERSIONS is not set # CONFIG_MODULE_SRCVERSION_ALL is not set CONFIG_BLOCK=y -# CONFIG_LBD is not set +CONFIG_LBDAF=y # CONFIG_BLK_DEV_BSG is not set # CONFIG_BLK_DEV_INTEGRITY is not set @@ -188,6 +203,7 @@ CONFIG_PPC_83xx=y # CONFIG_MPC837x_RDB is not set CONFIG_SBC834x=y # CONFIG_ASP834x is not set +# CONFIG_KMETER1 is not set CONFIG_PPC_MPC834x=y # CONFIG_PPC_86xx is not set # CONFIG_EMBEDDED6xx is not set @@ -232,6 +248,7 @@ CONFIG_BINFMT_ELF=y # CONFIG_HAVE_AOUT is not set # CONFIG_BINFMT_MISC is not set # CONFIG_IOMMU_HELPER is not set +# CONFIG_SWIOTLB is not set CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y CONFIG_ARCH_HAS_WALK_MEMORY=y CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y @@ -252,9 +269,9 @@ CONFIG_MIGRATION=y CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y -CONFIG_UNEVICTABLE_LRU=y CONFIG_HAVE_MLOCK=y CONFIG_HAVE_MLOCKED_PAGE_BIT=y +CONFIG_DEFAULT_MMAP_MIN_ADDR=4096 CONFIG_PPC_4K_PAGES=y # CONFIG_PPC_16K_PAGES is not set # CONFIG_PPC_64K_PAGES is not set @@ -363,6 +380,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set # CONFIG_PHONET is not set +# CONFIG_IEEE802154 is not set # CONFIG_NET_SCHED is not set # CONFIG_DCB is not set @@ -380,7 +398,11 @@ CONFIG_WIRELESS=y CONFIG_WIRELESS_OLD_REGULATORY=y # CONFIG_WIRELESS_EXT is not set # CONFIG_LIB80211 is not set -# CONFIG_MAC80211 is not set + +# +# CFG80211 needs to be enabled for MAC80211 +# +CONFIG_MAC80211_DEFAULT_PS_VALUE=0 # CONFIG_WIMAX is not set # CONFIG_RFKILL is not set # CONFIG_NET_9P is not set @@ -401,6 +423,7 @@ CONFIG_PREVENT_FIRMWARE_BUILD=y # CONFIG_MTD is not set CONFIG_OF_DEVICE=y CONFIG_OF_I2C=y +CONFIG_OF_MDIO=y # CONFIG_PARPORT is not set CONFIG_BLK_DEV=y # CONFIG_BLK_DEV_FD is not set @@ -435,7 +458,9 @@ CONFIG_MISC_DEVICES=y # # CONFIG_EEPROM_AT24 is not set # CONFIG_EEPROM_LEGACY is not set +# CONFIG_EEPROM_MAX6875 is not set # CONFIG_EEPROM_93CX6 is not set +# CONFIG_CB710_CORE is not set CONFIG_HAVE_IDE=y # CONFIG_IDE is not set @@ -455,14 +480,17 @@ CONFIG_HAVE_IDE=y # # -# Enable only one of the two stacks, unless you know what you are doing +# You can enable one or both FireWire driver stacks. +# + +# +# See the help texts for more information. # # CONFIG_FIREWIRE is not set # CONFIG_IEEE1394 is not set # CONFIG_I2O is not set # CONFIG_MACINTOSH_DRIVERS is not set CONFIG_NETDEVICES=y -CONFIG_COMPAT_NET_DEV_OPS=y # CONFIG_DUMMY is not set # CONFIG_BONDING is not set # CONFIG_MACVLAN is not set @@ -509,6 +537,7 @@ CONFIG_MII=y # CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set # CONFIG_NET_PCI is not set # CONFIG_B44 is not set +# CONFIG_KS8842 is not set # CONFIG_ATL2 is not set CONFIG_NETDEV_1000=y # CONFIG_ACENIC is not set @@ -528,8 +557,10 @@ CONFIG_NETDEV_1000=y # CONFIG_VIA_VELOCITY is not set # CONFIG_TIGON3 is not set # CONFIG_BNX2 is not set +# CONFIG_CNIC is not set CONFIG_FSL_PQ_MDIO=y CONFIG_GIANFAR=y +# CONFIG_MV643XX_ETH is not set # CONFIG_QLA3XXX is not set # CONFIG_ATL1 is not set # CONFIG_ATL1E is not set @@ -688,13 +719,17 @@ CONFIG_I2C_MPC=y # CONFIG_SENSORS_PCF8574 is not set # CONFIG_PCF8575 is not set # CONFIG_SENSORS_PCA9539 is not set -# CONFIG_SENSORS_MAX6875 is not set # CONFIG_SENSORS_TSL2550 is not set # CONFIG_I2C_DEBUG_CORE is not set # CONFIG_I2C_DEBUG_ALGO is not set # CONFIG_I2C_DEBUG_BUS is not set # CONFIG_I2C_DEBUG_CHIP is not set # CONFIG_SPI is not set + +# +# PPS support +# +# CONFIG_PPS is not set CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y # CONFIG_GPIOLIB is not set # CONFIG_W1 is not set @@ -749,6 +784,7 @@ CONFIG_HWMON=y # CONFIG_SENSORS_SMSC47B397 is not set # CONFIG_SENSORS_ADS7828 is not set # CONFIG_SENSORS_THMC50 is not set +# CONFIG_SENSORS_TMP401 is not set # CONFIG_SENSORS_VIA686A is not set # CONFIG_SENSORS_VT1211 is not set # CONFIG_SENSORS_VT8231 is not set @@ -797,23 +833,9 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_MFD_WM8400 is not set # CONFIG_MFD_WM8350_I2C is not set # CONFIG_MFD_PCF50633 is not set +# CONFIG_AB3100_CORE is not set # CONFIG_REGULATOR is not set - -# -# Multimedia devices -# - -# -# Multimedia core support -# -# CONFIG_VIDEO_DEV is not set -# CONFIG_DVB_CORE is not set -# CONFIG_VIDEO_MEDIA is not set - -# -# Multimedia drivers -# -# CONFIG_DAB is not set +# CONFIG_MEDIA_SUPPORT is not set # # Graphics support @@ -851,6 +873,10 @@ CONFIG_HID=y # CONFIG_DMADEVICES is not set # CONFIG_AUXDISPLAY is not set # CONFIG_UIO is not set + +# +# TI VLYNQ +# # CONFIG_STAGING is not set # @@ -862,10 +888,12 @@ CONFIG_HID=y # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set -CONFIG_FILE_LOCKING=y # CONFIG_XFS_FS is not set +# CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set # CONFIG_BTRFS_FS is not set +CONFIG_FILE_LOCKING=y +CONFIG_FSNOTIFY=y CONFIG_DNOTIFY=y CONFIG_INOTIFY=y CONFIG_INOTIFY_USER=y @@ -928,6 +956,7 @@ CONFIG_NFS_FS=y CONFIG_NFS_V3=y # CONFIG_NFS_V3_ACL is not set CONFIG_NFS_V4=y +# CONFIG_NFS_V4_1 is not set CONFIG_ROOT_NFS=y # CONFIG_NFSD is not set CONFIG_LOCKD=y @@ -971,6 +1000,7 @@ CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y CONFIG_HAVE_LMB=y CONFIG_NLATTR=y +CONFIG_GENERIC_ATOMIC64=y # # Kernel hacking @@ -994,22 +1024,11 @@ CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y CONFIG_HAVE_DYNAMIC_FTRACE=y CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y CONFIG_TRACING_SUPPORT=y - -# -# Tracers -# -# CONFIG_FUNCTION_TRACER is not set -# CONFIG_SCHED_TRACER is not set -# CONFIG_CONTEXT_SWITCH_TRACER is not set -# CONFIG_EVENT_TRACER is not set -# CONFIG_BOOT_TRACER is not set -# CONFIG_TRACE_BRANCH_PROFILING is not set -# CONFIG_STACK_TRACER is not set -# CONFIG_KMEMTRACE is not set -# CONFIG_WORKQUEUE_TRACER is not set -# CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_FTRACE is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y +# CONFIG_PPC_DISABLE_WERROR is not set +CONFIG_PPC_WERROR=y CONFIG_PRINT_STACK_DEPTH=64 # CONFIG_IRQSTACKS is not set # CONFIG_BOOTX_TEXT is not set diff --git a/arch/powerpc/configs/85xx/ksi8560_defconfig b/arch/powerpc/configs/85xx/ksi8560_defconfig index 09146ddaa3c..ff04e1028f5 100644 --- a/arch/powerpc/configs/85xx/ksi8560_defconfig +++ b/arch/powerpc/configs/85xx/ksi8560_defconfig @@ -1,14 +1,14 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.30-rc3 -# Wed May 13 17:22:16 2009 +# Linux kernel version: 2.6.31-rc4 +# Wed Jul 29 23:32:14 2009 # # CONFIG_PPC64 is not set # # Processor support # -# CONFIG_6xx is not set +# CONFIG_PPC_BOOK3S_32 is not set CONFIG_PPC_85xx=y # CONFIG_PPC_8xx is not set # CONFIG_40x is not set @@ -34,15 +34,16 @@ CONFIG_GENERIC_TIME=y CONFIG_GENERIC_TIME_VSYSCALL=y CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_GENERIC_HARDIRQS=y +CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set CONFIG_IRQ_PER_CPU=y CONFIG_STACKTRACE_SUPPORT=y CONFIG_HAVE_LATENCYTOP_SUPPORT=y +CONFIG_TRACE_IRQFLAGS_SUPPORT=y CONFIG_LOCKDEP_SUPPORT=y CONFIG_RWSEM_XCHGADD_ALGORITHM=y CONFIG_ARCH_HAS_ILOG2_U32=y CONFIG_GENERIC_HWEIGHT=y -CONFIG_GENERIC_CALIBRATE_DELAY=y CONFIG_GENERIC_FIND_NEXT_BIT=y CONFIG_GENERIC_GPIO=y # CONFIG_ARCH_NO_VIRT_TO_BUS is not set @@ -57,11 +58,13 @@ CONFIG_PPC_UDBG_16550=y # CONFIG_GENERIC_TBSYNC is not set CONFIG_AUDIT_ARCH=y CONFIG_GENERIC_BUG=y +CONFIG_DTC=y CONFIG_DEFAULT_UIMAGE=y # CONFIG_PPC_DCR_NATIVE is not set # CONFIG_PPC_DCR_MMIO is not set CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" +CONFIG_CONSTRUCTORS=y # # General setup @@ -108,7 +111,6 @@ CONFIG_SYSCTL_SYSCALL=y CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_ALL is not set # CONFIG_KALLSYMS_EXTRA_PASS is not set -# CONFIG_STRIP_ASM_SYMS is not set CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y @@ -121,8 +123,15 @@ CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y CONFIG_AIO=y +CONFIG_HAVE_PERF_COUNTERS=y + +# +# Performance Counters +# +# CONFIG_PERF_COUNTERS is not set CONFIG_VM_EVENT_COUNTERS=y CONFIG_SLUB_DEBUG=y +# CONFIG_STRIP_ASM_SYMS is not set CONFIG_COMPAT_BRK=y # CONFIG_SLAB is not set CONFIG_SLUB=y @@ -136,6 +145,11 @@ CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_ARCH_TRACEHOOK=y CONFIG_HAVE_CLK=y + +# +# GCOV-based kernel profiling +# +# CONFIG_GCOV_KERNEL is not set # CONFIG_SLOW_WORK is not set # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y @@ -143,7 +157,7 @@ CONFIG_RT_MUTEXES=y CONFIG_BASE_SMALL=0 # CONFIG_MODULES is not set CONFIG_BLOCK=y -# CONFIG_LBD is not set +CONFIG_LBDAF=y # CONFIG_BLK_DEV_BSG is not set # CONFIG_BLK_DEV_INTEGRITY is not set @@ -176,6 +190,7 @@ CONFIG_MPC85xx=y # CONFIG_MPC85xx_DS is not set # CONFIG_SOCRATES is not set CONFIG_KSI8560=y +# CONFIG_XES_MPC85xx is not set # CONFIG_STX_GP3 is not set # CONFIG_TQM8540 is not set # CONFIG_TQM8541 is not set @@ -224,6 +239,7 @@ CONFIG_BINFMT_ELF=y CONFIG_BINFMT_MISC=y CONFIG_MATH_EMULATION=y # CONFIG_IOMMU_HELPER is not set +# CONFIG_SWIOTLB is not set CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y CONFIG_ARCH_HAS_WALK_MEMORY=y CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y @@ -242,9 +258,9 @@ CONFIG_MIGRATION=y CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y -CONFIG_UNEVICTABLE_LRU=y CONFIG_HAVE_MLOCK=y CONFIG_HAVE_MLOCKED_PAGE_BIT=y +CONFIG_DEFAULT_MMAP_MIN_ADDR=4096 CONFIG_PPC_4K_PAGES=y # CONFIG_PPC_16K_PAGES is not set # CONFIG_PPC_64K_PAGES is not set @@ -346,6 +362,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set # CONFIG_PHONET is not set +# CONFIG_IEEE802154 is not set # CONFIG_NET_SCHED is not set # CONFIG_DCB is not set @@ -363,7 +380,11 @@ CONFIG_WIRELESS=y CONFIG_WIRELESS_OLD_REGULATORY=y # CONFIG_WIRELESS_EXT is not set # CONFIG_LIB80211 is not set -# CONFIG_MAC80211 is not set + +# +# CFG80211 needs to be enabled for MAC80211 +# +CONFIG_MAC80211_DEFAULT_PS_VALUE=0 # CONFIG_WIMAX is not set # CONFIG_RFKILL is not set # CONFIG_NET_9P is not set @@ -466,6 +487,7 @@ CONFIG_MTD_PHYSMAP_OF=y # CONFIG_MTD_UBI is not set CONFIG_OF_DEVICE=y CONFIG_OF_GPIO=y +CONFIG_OF_MDIO=y # CONFIG_PARPORT is not set CONFIG_BLK_DEV=y # CONFIG_BLK_DEV_FD is not set @@ -520,7 +542,6 @@ CONFIG_IDE_PROC_FS=y # CONFIG_MD is not set # CONFIG_MACINTOSH_DRIVERS is not set CONFIG_NETDEVICES=y -CONFIG_COMPAT_NET_DEV_OPS=y # CONFIG_DUMMY is not set # CONFIG_BONDING is not set # CONFIG_MACVLAN is not set @@ -560,6 +581,7 @@ CONFIG_MII=y # CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set # CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set # CONFIG_B44 is not set +# CONFIG_KS8842 is not set CONFIG_FS_ENET=y # CONFIG_FS_ENET_HAS_SCC is not set CONFIG_FS_ENET_HAS_FCC=y @@ -567,6 +589,7 @@ CONFIG_FS_ENET_MDIO_FCC=y CONFIG_NETDEV_1000=y CONFIG_FSL_PQ_MDIO=y CONFIG_GIANFAR=y +# CONFIG_MV643XX_ETH is not set CONFIG_NETDEV_10000=y # @@ -654,6 +677,11 @@ CONFIG_GEN_RTC=y # CONFIG_TCG_TPM is not set # CONFIG_I2C is not set # CONFIG_SPI is not set + +# +# PPS support +# +# CONFIG_PPS is not set CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y CONFIG_ARCH_REQUIRE_GPIOLIB=y CONFIG_GPIOLIB=y @@ -710,22 +738,7 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_HTC_PASIC3 is not set # CONFIG_MFD_TMIO is not set # CONFIG_REGULATOR is not set - -# -# Multimedia devices -# - -# -# Multimedia core support -# -# CONFIG_VIDEO_DEV is not set -# CONFIG_DVB_CORE is not set -# CONFIG_VIDEO_MEDIA is not set - -# -# Multimedia drivers -# -CONFIG_DAB=y +# CONFIG_MEDIA_SUPPORT is not set # # Graphics support @@ -777,6 +790,10 @@ CONFIG_USB_SUPPORT=y # CONFIG_DMADEVICES is not set # CONFIG_AUXDISPLAY is not set # CONFIG_UIO is not set + +# +# TI VLYNQ +# # CONFIG_STAGING is not set # @@ -797,10 +814,12 @@ CONFIG_FS_MBCACHE=y # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set -CONFIG_FILE_LOCKING=y # CONFIG_XFS_FS is not set +# CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set # CONFIG_BTRFS_FS is not set +CONFIG_FILE_LOCKING=y +CONFIG_FSNOTIFY=y CONFIG_DNOTIFY=y CONFIG_INOTIFY=y CONFIG_INOTIFY_USER=y @@ -916,6 +935,7 @@ CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y CONFIG_HAVE_LMB=y CONFIG_NLATTR=y +CONFIG_GENERIC_ATOMIC64=y # # Kernel hacking @@ -946,6 +966,9 @@ CONFIG_SCHED_DEBUG=y # CONFIG_RT_MUTEX_TESTER is not set # CONFIG_DEBUG_SPINLOCK is not set CONFIG_DEBUG_MUTEXES=y +# CONFIG_DEBUG_LOCK_ALLOC is not set +# CONFIG_PROVE_LOCKING is not set +# CONFIG_LOCK_STAT is not set # CONFIG_DEBUG_SPINLOCK_SLEEP is not set # CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set # CONFIG_DEBUG_KOBJECT is not set @@ -958,7 +981,6 @@ CONFIG_DEBUG_MUTEXES=y # CONFIG_DEBUG_LIST is not set # CONFIG_DEBUG_SG is not set # CONFIG_DEBUG_NOTIFIERS is not set -# CONFIG_BOOT_PRINTK_DELAY is not set # CONFIG_RCU_TORTURE_TEST is not set # CONFIG_RCU_CPU_STALL_DETECTOR is not set # CONFIG_BACKTRACE_SELF_TEST is not set @@ -972,16 +994,15 @@ CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y CONFIG_HAVE_DYNAMIC_FTRACE=y CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y CONFIG_TRACING_SUPPORT=y - -# -# Tracers -# +CONFIG_FTRACE=y # CONFIG_FUNCTION_TRACER is not set +# CONFIG_IRQSOFF_TRACER is not set # CONFIG_SCHED_TRACER is not set -# CONFIG_CONTEXT_SWITCH_TRACER is not set -# CONFIG_EVENT_TRACER is not set +# CONFIG_ENABLE_DEFAULT_TRACERS is not set # CONFIG_BOOT_TRACER is not set -# CONFIG_TRACE_BRANCH_PROFILING is not set +CONFIG_BRANCH_PROFILE_NONE=y +# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set +# CONFIG_PROFILE_ALL_BRANCHES is not set # CONFIG_STACK_TRACER is not set # CONFIG_KMEMTRACE is not set # CONFIG_WORKQUEUE_TRACER is not set @@ -990,9 +1011,13 @@ CONFIG_TRACING_SUPPORT=y # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y # CONFIG_KGDB is not set +# CONFIG_KMEMCHECK is not set +# CONFIG_PPC_DISABLE_WERROR is not set +CONFIG_PPC_WERROR=y CONFIG_PRINT_STACK_DEPTH=64 # CONFIG_DEBUG_STACKOVERFLOW is not set # CONFIG_DEBUG_STACK_USAGE is not set +# CONFIG_PPC_EMULATED_STATS is not set # CONFIG_CODE_PATCHING_SELFTEST is not set # CONFIG_FTR_FIXUP_SELFTEST is not set # CONFIG_MSI_BITMAP_SELFTEST is not set diff --git a/arch/powerpc/configs/85xx/mpc8540_ads_defconfig b/arch/powerpc/configs/85xx/mpc8540_ads_defconfig index 7b43be7586b..fb10cc83702 100644 --- a/arch/powerpc/configs/85xx/mpc8540_ads_defconfig +++ b/arch/powerpc/configs/85xx/mpc8540_ads_defconfig @@ -1,14 +1,14 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.30-rc3 -# Wed May 13 17:22:17 2009 +# Linux kernel version: 2.6.31-rc4 +# Wed Jul 29 23:32:15 2009 # # CONFIG_PPC64 is not set # # Processor support # -# CONFIG_6xx is not set +# CONFIG_PPC_BOOK3S_32 is not set CONFIG_PPC_85xx=y # CONFIG_PPC_8xx is not set # CONFIG_40x is not set @@ -34,15 +34,16 @@ CONFIG_GENERIC_TIME=y CONFIG_GENERIC_TIME_VSYSCALL=y CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_GENERIC_HARDIRQS=y +CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set CONFIG_IRQ_PER_CPU=y CONFIG_STACKTRACE_SUPPORT=y CONFIG_HAVE_LATENCYTOP_SUPPORT=y +CONFIG_TRACE_IRQFLAGS_SUPPORT=y CONFIG_LOCKDEP_SUPPORT=y CONFIG_RWSEM_XCHGADD_ALGORITHM=y CONFIG_ARCH_HAS_ILOG2_U32=y CONFIG_GENERIC_HWEIGHT=y -CONFIG_GENERIC_CALIBRATE_DELAY=y CONFIG_GENERIC_FIND_NEXT_BIT=y # CONFIG_ARCH_NO_VIRT_TO_BUS is not set CONFIG_PPC=y @@ -56,11 +57,13 @@ CONFIG_PPC_UDBG_16550=y # CONFIG_GENERIC_TBSYNC is not set CONFIG_AUDIT_ARCH=y CONFIG_GENERIC_BUG=y +CONFIG_DTC=y CONFIG_DEFAULT_UIMAGE=y # CONFIG_PPC_DCR_NATIVE is not set # CONFIG_PPC_DCR_MMIO is not set CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" +CONFIG_CONSTRUCTORS=y # # General setup @@ -111,7 +114,6 @@ CONFIG_SYSCTL_SYSCALL=y CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_ALL is not set # CONFIG_KALLSYMS_EXTRA_PASS is not set -# CONFIG_STRIP_ASM_SYMS is not set CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y @@ -124,8 +126,15 @@ CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y CONFIG_AIO=y +CONFIG_HAVE_PERF_COUNTERS=y + +# +# Performance Counters +# +# CONFIG_PERF_COUNTERS is not set CONFIG_VM_EVENT_COUNTERS=y CONFIG_SLUB_DEBUG=y +# CONFIG_STRIP_ASM_SYMS is not set CONFIG_COMPAT_BRK=y # CONFIG_SLAB is not set CONFIG_SLUB=y @@ -138,6 +147,10 @@ CONFIG_HAVE_IOREMAP_PROT=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_ARCH_TRACEHOOK=y + +# +# GCOV-based kernel profiling +# # CONFIG_SLOW_WORK is not set # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y @@ -145,7 +158,7 @@ CONFIG_RT_MUTEXES=y CONFIG_BASE_SMALL=0 # CONFIG_MODULES is not set CONFIG_BLOCK=y -# CONFIG_LBD is not set +CONFIG_LBDAF=y # CONFIG_BLK_DEV_BSG is not set # CONFIG_BLK_DEV_INTEGRITY is not set @@ -178,6 +191,7 @@ CONFIG_MPC8540_ADS=y # CONFIG_MPC85xx_DS is not set # CONFIG_SOCRATES is not set # CONFIG_KSI8560 is not set +# CONFIG_XES_MPC85xx is not set # CONFIG_STX_GP3 is not set # CONFIG_TQM8540 is not set # CONFIG_TQM8541 is not set @@ -226,6 +240,7 @@ CONFIG_BINFMT_ELF=y CONFIG_BINFMT_MISC=y CONFIG_MATH_EMULATION=y # CONFIG_IOMMU_HELPER is not set +# CONFIG_SWIOTLB is not set CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y CONFIG_ARCH_HAS_WALK_MEMORY=y CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y @@ -244,9 +259,9 @@ CONFIG_MIGRATION=y CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y -CONFIG_UNEVICTABLE_LRU=y CONFIG_HAVE_MLOCK=y CONFIG_HAVE_MLOCKED_PAGE_BIT=y +CONFIG_DEFAULT_MMAP_MIN_ADDR=4096 CONFIG_PPC_4K_PAGES=y # CONFIG_PPC_16K_PAGES is not set # CONFIG_PPC_64K_PAGES is not set @@ -348,6 +363,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set # CONFIG_PHONET is not set +# CONFIG_IEEE802154 is not set # CONFIG_NET_SCHED is not set # CONFIG_DCB is not set @@ -365,7 +381,11 @@ CONFIG_WIRELESS=y CONFIG_WIRELESS_OLD_REGULATORY=y # CONFIG_WIRELESS_EXT is not set # CONFIG_LIB80211 is not set -# CONFIG_MAC80211 is not set + +# +# CFG80211 needs to be enabled for MAC80211 +# +CONFIG_MAC80211_DEFAULT_PS_VALUE=0 # CONFIG_WIMAX is not set # CONFIG_RFKILL is not set # CONFIG_NET_9P is not set @@ -387,6 +407,7 @@ CONFIG_PREVENT_FIRMWARE_BUILD=y # CONFIG_CONNECTOR is not set # CONFIG_MTD is not set CONFIG_OF_DEVICE=y +CONFIG_OF_MDIO=y # CONFIG_PARPORT is not set CONFIG_BLK_DEV=y # CONFIG_BLK_DEV_FD is not set @@ -423,7 +444,6 @@ CONFIG_HAVE_IDE=y # CONFIG_MD is not set # CONFIG_MACINTOSH_DRIVERS is not set CONFIG_NETDEVICES=y -CONFIG_COMPAT_NET_DEV_OPS=y # CONFIG_DUMMY is not set # CONFIG_BONDING is not set # CONFIG_MACVLAN is not set @@ -462,9 +482,11 @@ CONFIG_MII=y # CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set # CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set # CONFIG_B44 is not set +# CONFIG_KS8842 is not set CONFIG_NETDEV_1000=y CONFIG_FSL_PQ_MDIO=y CONFIG_GIANFAR=y +# CONFIG_MV643XX_ETH is not set CONFIG_NETDEV_10000=y # @@ -555,6 +577,11 @@ CONFIG_GEN_RTC=y # CONFIG_TCG_TPM is not set # CONFIG_I2C is not set # CONFIG_SPI is not set + +# +# PPS support +# +# CONFIG_PPS is not set CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y # CONFIG_GPIOLIB is not set # CONFIG_W1 is not set @@ -590,22 +617,7 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_HTC_PASIC3 is not set # CONFIG_MFD_TMIO is not set # CONFIG_REGULATOR is not set - -# -# Multimedia devices -# - -# -# Multimedia core support -# -# CONFIG_VIDEO_DEV is not set -# CONFIG_DVB_CORE is not set -# CONFIG_VIDEO_MEDIA is not set - -# -# Multimedia drivers -# -CONFIG_DAB=y +# CONFIG_MEDIA_SUPPORT is not set # # Graphics support @@ -657,6 +669,10 @@ CONFIG_USB_SUPPORT=y # CONFIG_DMADEVICES is not set # CONFIG_AUXDISPLAY is not set # CONFIG_UIO is not set + +# +# TI VLYNQ +# # CONFIG_STAGING is not set # @@ -676,10 +692,12 @@ CONFIG_FS_MBCACHE=y # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set -CONFIG_FILE_LOCKING=y # CONFIG_XFS_FS is not set +# CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set # CONFIG_BTRFS_FS is not set +CONFIG_FILE_LOCKING=y +CONFIG_FSNOTIFY=y CONFIG_DNOTIFY=y CONFIG_INOTIFY=y CONFIG_INOTIFY_USER=y @@ -794,6 +812,7 @@ CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y CONFIG_HAVE_LMB=y CONFIG_NLATTR=y +CONFIG_GENERIC_ATOMIC64=y # # Kernel hacking @@ -824,6 +843,9 @@ CONFIG_SCHED_DEBUG=y # CONFIG_RT_MUTEX_TESTER is not set # CONFIG_DEBUG_SPINLOCK is not set CONFIG_DEBUG_MUTEXES=y +# CONFIG_DEBUG_LOCK_ALLOC is not set +# CONFIG_PROVE_LOCKING is not set +# CONFIG_LOCK_STAT is not set # CONFIG_DEBUG_SPINLOCK_SLEEP is not set # CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set # CONFIG_DEBUG_KOBJECT is not set @@ -835,7 +857,6 @@ CONFIG_DEBUG_MUTEXES=y # CONFIG_DEBUG_LIST is not set # CONFIG_DEBUG_SG is not set # CONFIG_DEBUG_NOTIFIERS is not set -# CONFIG_BOOT_PRINTK_DELAY is not set # CONFIG_RCU_TORTURE_TEST is not set # CONFIG_RCU_CPU_STALL_DETECTOR is not set # CONFIG_BACKTRACE_SELF_TEST is not set @@ -849,16 +870,15 @@ CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y CONFIG_HAVE_DYNAMIC_FTRACE=y CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y CONFIG_TRACING_SUPPORT=y - -# -# Tracers -# +CONFIG_FTRACE=y # CONFIG_FUNCTION_TRACER is not set +# CONFIG_IRQSOFF_TRACER is not set # CONFIG_SCHED_TRACER is not set -# CONFIG_CONTEXT_SWITCH_TRACER is not set -# CONFIG_EVENT_TRACER is not set +# CONFIG_ENABLE_DEFAULT_TRACERS is not set # CONFIG_BOOT_TRACER is not set -# CONFIG_TRACE_BRANCH_PROFILING is not set +CONFIG_BRANCH_PROFILE_NONE=y +# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set +# CONFIG_PROFILE_ALL_BRANCHES is not set # CONFIG_STACK_TRACER is not set # CONFIG_KMEMTRACE is not set # CONFIG_WORKQUEUE_TRACER is not set @@ -866,6 +886,9 @@ CONFIG_TRACING_SUPPORT=y # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y # CONFIG_KGDB is not set +# CONFIG_KMEMCHECK is not set +# CONFIG_PPC_DISABLE_WERROR is not set +CONFIG_PPC_WERROR=y CONFIG_PRINT_STACK_DEPTH=64 # CONFIG_DEBUG_STACKOVERFLOW is not set # CONFIG_DEBUG_STACK_USAGE is not set diff --git a/arch/powerpc/configs/85xx/mpc8560_ads_defconfig b/arch/powerpc/configs/85xx/mpc8560_ads_defconfig index 62adb71a5d4..5c8ce697882 100644 --- a/arch/powerpc/configs/85xx/mpc8560_ads_defconfig +++ b/arch/powerpc/configs/85xx/mpc8560_ads_defconfig @@ -1,14 +1,14 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.30-rc3 -# Wed May 13 17:22:17 2009 +# Linux kernel version: 2.6.31-rc4 +# Wed Jul 29 23:32:16 2009 # # CONFIG_PPC64 is not set # # Processor support # -# CONFIG_6xx is not set +# CONFIG_PPC_BOOK3S_32 is not set CONFIG_PPC_85xx=y # CONFIG_PPC_8xx is not set # CONFIG_40x is not set @@ -34,15 +34,16 @@ CONFIG_GENERIC_TIME=y CONFIG_GENERIC_TIME_VSYSCALL=y CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_GENERIC_HARDIRQS=y +CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set CONFIG_IRQ_PER_CPU=y CONFIG_STACKTRACE_SUPPORT=y CONFIG_HAVE_LATENCYTOP_SUPPORT=y +CONFIG_TRACE_IRQFLAGS_SUPPORT=y CONFIG_LOCKDEP_SUPPORT=y CONFIG_RWSEM_XCHGADD_ALGORITHM=y CONFIG_ARCH_HAS_ILOG2_U32=y CONFIG_GENERIC_HWEIGHT=y -CONFIG_GENERIC_CALIBRATE_DELAY=y CONFIG_GENERIC_FIND_NEXT_BIT=y CONFIG_GENERIC_GPIO=y # CONFIG_ARCH_NO_VIRT_TO_BUS is not set @@ -57,11 +58,13 @@ CONFIG_PPC_UDBG_16550=y # CONFIG_GENERIC_TBSYNC is not set CONFIG_AUDIT_ARCH=y CONFIG_GENERIC_BUG=y +CONFIG_DTC=y CONFIG_DEFAULT_UIMAGE=y # CONFIG_PPC_DCR_NATIVE is not set # CONFIG_PPC_DCR_MMIO is not set CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" +CONFIG_CONSTRUCTORS=y # # General setup @@ -112,7 +115,6 @@ CONFIG_SYSCTL_SYSCALL=y CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_ALL is not set # CONFIG_KALLSYMS_EXTRA_PASS is not set -# CONFIG_STRIP_ASM_SYMS is not set CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y @@ -125,9 +127,16 @@ CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y CONFIG_AIO=y +CONFIG_HAVE_PERF_COUNTERS=y + +# +# Performance Counters +# +# CONFIG_PERF_COUNTERS is not set CONFIG_VM_EVENT_COUNTERS=y CONFIG_PCI_QUIRKS=y CONFIG_SLUB_DEBUG=y +# CONFIG_STRIP_ASM_SYMS is not set CONFIG_COMPAT_BRK=y # CONFIG_SLAB is not set CONFIG_SLUB=y @@ -141,6 +150,10 @@ CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_ARCH_TRACEHOOK=y CONFIG_HAVE_CLK=y + +# +# GCOV-based kernel profiling +# # CONFIG_SLOW_WORK is not set # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y @@ -148,7 +161,7 @@ CONFIG_RT_MUTEXES=y CONFIG_BASE_SMALL=0 # CONFIG_MODULES is not set CONFIG_BLOCK=y -# CONFIG_LBD is not set +CONFIG_LBDAF=y # CONFIG_BLK_DEV_BSG is not set # CONFIG_BLK_DEV_INTEGRITY is not set @@ -181,6 +194,7 @@ CONFIG_MPC8560_ADS=y # CONFIG_MPC85xx_DS is not set # CONFIG_SOCRATES is not set # CONFIG_KSI8560 is not set +# CONFIG_XES_MPC85xx is not set # CONFIG_STX_GP3 is not set # CONFIG_TQM8540 is not set # CONFIG_TQM8541 is not set @@ -229,6 +243,7 @@ CONFIG_BINFMT_ELF=y CONFIG_BINFMT_MISC=y CONFIG_MATH_EMULATION=y # CONFIG_IOMMU_HELPER is not set +# CONFIG_SWIOTLB is not set CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y CONFIG_ARCH_HAS_WALK_MEMORY=y CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y @@ -247,9 +262,9 @@ CONFIG_MIGRATION=y CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y -CONFIG_UNEVICTABLE_LRU=y CONFIG_HAVE_MLOCK=y CONFIG_HAVE_MLOCKED_PAGE_BIT=y +CONFIG_DEFAULT_MMAP_MIN_ADDR=4096 CONFIG_PPC_4K_PAGES=y # CONFIG_PPC_16K_PAGES is not set # CONFIG_PPC_64K_PAGES is not set @@ -360,6 +375,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set # CONFIG_PHONET is not set +# CONFIG_IEEE802154 is not set # CONFIG_NET_SCHED is not set # CONFIG_DCB is not set @@ -377,7 +393,11 @@ CONFIG_WIRELESS=y CONFIG_WIRELESS_OLD_REGULATORY=y # CONFIG_WIRELESS_EXT is not set # CONFIG_LIB80211 is not set -# CONFIG_MAC80211 is not set + +# +# CFG80211 needs to be enabled for MAC80211 +# +CONFIG_MAC80211_DEFAULT_PS_VALUE=0 # CONFIG_WIMAX is not set # CONFIG_RFKILL is not set # CONFIG_NET_9P is not set @@ -400,6 +420,7 @@ CONFIG_PREVENT_FIRMWARE_BUILD=y # CONFIG_MTD is not set CONFIG_OF_DEVICE=y CONFIG_OF_GPIO=y +CONFIG_OF_MDIO=y # CONFIG_PARPORT is not set CONFIG_BLK_DEV=y # CONFIG_BLK_DEV_FD is not set @@ -431,6 +452,7 @@ CONFIG_MISC_DEVICES=y # EEPROM support # # CONFIG_EEPROM_93CX6 is not set +# CONFIG_CB710_CORE is not set CONFIG_HAVE_IDE=y # CONFIG_IDE is not set @@ -450,14 +472,17 @@ CONFIG_HAVE_IDE=y # # -# Enable only one of the two stacks, unless you know what you are doing +# You can enable one or both FireWire driver stacks. +# + +# +# See the help texts for more information. # # CONFIG_FIREWIRE is not set # CONFIG_IEEE1394 is not set # CONFIG_I2O is not set # CONFIG_MACINTOSH_DRIVERS is not set CONFIG_NETDEVICES=y -CONFIG_COMPAT_NET_DEV_OPS=y # CONFIG_DUMMY is not set # CONFIG_BONDING is not set # CONFIG_MACVLAN is not set @@ -504,6 +529,7 @@ CONFIG_MII=y # CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set # CONFIG_NET_PCI is not set # CONFIG_B44 is not set +# CONFIG_KS8842 is not set # CONFIG_ATL2 is not set CONFIG_FS_ENET=y # CONFIG_FS_ENET_HAS_SCC is not set @@ -527,8 +553,10 @@ CONFIG_E1000=y # CONFIG_VIA_VELOCITY is not set # CONFIG_TIGON3 is not set # CONFIG_BNX2 is not set +# CONFIG_CNIC is not set CONFIG_FSL_PQ_MDIO=y CONFIG_GIANFAR=y +# CONFIG_MV643XX_ETH is not set # CONFIG_QLA3XXX is not set # CONFIG_ATL1 is not set # CONFIG_ATL1E is not set @@ -646,6 +674,11 @@ CONFIG_GEN_RTC=y CONFIG_DEVPORT=y # CONFIG_I2C is not set # CONFIG_SPI is not set + +# +# PPS support +# +# CONFIG_PPS is not set CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y CONFIG_ARCH_REQUIRE_GPIOLIB=y CONFIG_GPIOLIB=y @@ -707,22 +740,7 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_HTC_PASIC3 is not set # CONFIG_MFD_TMIO is not set # CONFIG_REGULATOR is not set - -# -# Multimedia devices -# - -# -# Multimedia core support -# -# CONFIG_VIDEO_DEV is not set -# CONFIG_DVB_CORE is not set -# CONFIG_VIDEO_MEDIA is not set - -# -# Multimedia drivers -# -CONFIG_DAB=y +# CONFIG_MEDIA_SUPPORT is not set # # Graphics support @@ -779,6 +797,10 @@ CONFIG_USB_ARCH_HAS_EHCI=y # CONFIG_DMADEVICES is not set # CONFIG_AUXDISPLAY is not set # CONFIG_UIO is not set + +# +# TI VLYNQ +# # CONFIG_STAGING is not set # @@ -798,10 +820,12 @@ CONFIG_FS_MBCACHE=y # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set -CONFIG_FILE_LOCKING=y # CONFIG_XFS_FS is not set +# CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set # CONFIG_BTRFS_FS is not set +CONFIG_FILE_LOCKING=y +CONFIG_FSNOTIFY=y CONFIG_DNOTIFY=y CONFIG_INOTIFY=y CONFIG_INOTIFY_USER=y @@ -916,6 +940,7 @@ CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y CONFIG_HAVE_LMB=y CONFIG_NLATTR=y +CONFIG_GENERIC_ATOMIC64=y # # Kernel hacking @@ -946,6 +971,9 @@ CONFIG_SCHED_DEBUG=y # CONFIG_RT_MUTEX_TESTER is not set # CONFIG_DEBUG_SPINLOCK is not set CONFIG_DEBUG_MUTEXES=y +# CONFIG_DEBUG_LOCK_ALLOC is not set +# CONFIG_PROVE_LOCKING is not set +# CONFIG_LOCK_STAT is not set # CONFIG_DEBUG_SPINLOCK_SLEEP is not set # CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set # CONFIG_DEBUG_KOBJECT is not set @@ -957,7 +985,6 @@ CONFIG_DEBUG_MUTEXES=y # CONFIG_DEBUG_LIST is not set # CONFIG_DEBUG_SG is not set # CONFIG_DEBUG_NOTIFIERS is not set -# CONFIG_BOOT_PRINTK_DELAY is not set # CONFIG_RCU_TORTURE_TEST is not set # CONFIG_RCU_CPU_STALL_DETECTOR is not set # CONFIG_BACKTRACE_SELF_TEST is not set @@ -971,16 +998,15 @@ CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y CONFIG_HAVE_DYNAMIC_FTRACE=y CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y CONFIG_TRACING_SUPPORT=y - -# -# Tracers -# +CONFIG_FTRACE=y # CONFIG_FUNCTION_TRACER is not set +# CONFIG_IRQSOFF_TRACER is not set # CONFIG_SCHED_TRACER is not set -# CONFIG_CONTEXT_SWITCH_TRACER is not set -# CONFIG_EVENT_TRACER is not set +# CONFIG_ENABLE_DEFAULT_TRACERS is not set # CONFIG_BOOT_TRACER is not set -# CONFIG_TRACE_BRANCH_PROFILING is not set +CONFIG_BRANCH_PROFILE_NONE=y +# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set +# CONFIG_PROFILE_ALL_BRANCHES is not set # CONFIG_STACK_TRACER is not set # CONFIG_KMEMTRACE is not set # CONFIG_WORKQUEUE_TRACER is not set @@ -988,6 +1014,9 @@ CONFIG_TRACING_SUPPORT=y # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y # CONFIG_KGDB is not set +# CONFIG_KMEMCHECK is not set +# CONFIG_PPC_DISABLE_WERROR is not set +CONFIG_PPC_WERROR=y CONFIG_PRINT_STACK_DEPTH=64 # CONFIG_DEBUG_STACKOVERFLOW is not set # CONFIG_DEBUG_STACK_USAGE is not set diff --git a/arch/powerpc/configs/85xx/mpc85xx_cds_defconfig b/arch/powerpc/configs/85xx/mpc85xx_cds_defconfig index 41209e3a654..158e63e8607 100644 --- a/arch/powerpc/configs/85xx/mpc85xx_cds_defconfig +++ b/arch/powerpc/configs/85xx/mpc85xx_cds_defconfig @@ -1,14 +1,14 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.30-rc3 -# Wed May 13 17:22:18 2009 +# Linux kernel version: 2.6.31-rc4 +# Wed Jul 29 23:32:17 2009 # # CONFIG_PPC64 is not set # # Processor support # -# CONFIG_6xx is not set +# CONFIG_PPC_BOOK3S_32 is not set CONFIG_PPC_85xx=y # CONFIG_PPC_8xx is not set # CONFIG_40x is not set @@ -34,15 +34,16 @@ CONFIG_GENERIC_TIME=y CONFIG_GENERIC_TIME_VSYSCALL=y CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_GENERIC_HARDIRQS=y +CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set CONFIG_IRQ_PER_CPU=y CONFIG_STACKTRACE_SUPPORT=y CONFIG_HAVE_LATENCYTOP_SUPPORT=y +CONFIG_TRACE_IRQFLAGS_SUPPORT=y CONFIG_LOCKDEP_SUPPORT=y CONFIG_RWSEM_XCHGADD_ALGORITHM=y CONFIG_ARCH_HAS_ILOG2_U32=y CONFIG_GENERIC_HWEIGHT=y -CONFIG_GENERIC_CALIBRATE_DELAY=y CONFIG_GENERIC_FIND_NEXT_BIT=y # CONFIG_ARCH_NO_VIRT_TO_BUS is not set CONFIG_PPC=y @@ -56,11 +57,13 @@ CONFIG_PPC_UDBG_16550=y # CONFIG_GENERIC_TBSYNC is not set CONFIG_AUDIT_ARCH=y CONFIG_GENERIC_BUG=y +CONFIG_DTC=y CONFIG_DEFAULT_UIMAGE=y # CONFIG_PPC_DCR_NATIVE is not set # CONFIG_PPC_DCR_MMIO is not set CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" +CONFIG_CONSTRUCTORS=y # # General setup @@ -111,7 +114,6 @@ CONFIG_SYSCTL_SYSCALL=y CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_ALL is not set # CONFIG_KALLSYMS_EXTRA_PASS is not set -# CONFIG_STRIP_ASM_SYMS is not set CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y @@ -124,9 +126,16 @@ CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y CONFIG_AIO=y +CONFIG_HAVE_PERF_COUNTERS=y + +# +# Performance Counters +# +# CONFIG_PERF_COUNTERS is not set CONFIG_VM_EVENT_COUNTERS=y CONFIG_PCI_QUIRKS=y CONFIG_SLUB_DEBUG=y +# CONFIG_STRIP_ASM_SYMS is not set CONFIG_COMPAT_BRK=y # CONFIG_SLAB is not set CONFIG_SLUB=y @@ -139,6 +148,10 @@ CONFIG_HAVE_IOREMAP_PROT=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_ARCH_TRACEHOOK=y + +# +# GCOV-based kernel profiling +# # CONFIG_SLOW_WORK is not set # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y @@ -146,7 +159,7 @@ CONFIG_RT_MUTEXES=y CONFIG_BASE_SMALL=0 # CONFIG_MODULES is not set CONFIG_BLOCK=y -# CONFIG_LBD is not set +CONFIG_LBDAF=y # CONFIG_BLK_DEV_BSG is not set # CONFIG_BLK_DEV_INTEGRITY is not set @@ -179,6 +192,7 @@ CONFIG_MPC85xx_CDS=y # CONFIG_MPC85xx_DS is not set # CONFIG_SOCRATES is not set # CONFIG_KSI8560 is not set +# CONFIG_XES_MPC85xx is not set # CONFIG_STX_GP3 is not set # CONFIG_TQM8540 is not set # CONFIG_TQM8541 is not set @@ -227,6 +241,7 @@ CONFIG_BINFMT_ELF=y CONFIG_BINFMT_MISC=y CONFIG_MATH_EMULATION=y # CONFIG_IOMMU_HELPER is not set +# CONFIG_SWIOTLB is not set CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y CONFIG_ARCH_HAS_WALK_MEMORY=y CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y @@ -245,9 +260,9 @@ CONFIG_MIGRATION=y CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y -CONFIG_UNEVICTABLE_LRU=y CONFIG_HAVE_MLOCK=y CONFIG_HAVE_MLOCKED_PAGE_BIT=y +CONFIG_DEFAULT_MMAP_MIN_ADDR=4096 CONFIG_PPC_4K_PAGES=y # CONFIG_PPC_16K_PAGES is not set # CONFIG_PPC_64K_PAGES is not set @@ -358,6 +373,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set # CONFIG_PHONET is not set +# CONFIG_IEEE802154 is not set # CONFIG_NET_SCHED is not set # CONFIG_DCB is not set @@ -375,7 +391,11 @@ CONFIG_WIRELESS=y CONFIG_WIRELESS_OLD_REGULATORY=y # CONFIG_WIRELESS_EXT is not set # CONFIG_LIB80211 is not set -# CONFIG_MAC80211 is not set + +# +# CFG80211 needs to be enabled for MAC80211 +# +CONFIG_MAC80211_DEFAULT_PS_VALUE=0 # CONFIG_WIMAX is not set # CONFIG_RFKILL is not set # CONFIG_NET_9P is not set @@ -397,6 +417,7 @@ CONFIG_PREVENT_FIRMWARE_BUILD=y # CONFIG_CONNECTOR is not set # CONFIG_MTD is not set CONFIG_OF_DEVICE=y +CONFIG_OF_MDIO=y # CONFIG_PARPORT is not set CONFIG_BLK_DEV=y # CONFIG_BLK_DEV_FD is not set @@ -428,6 +449,7 @@ CONFIG_MISC_DEVICES=y # EEPROM support # # CONFIG_EEPROM_93CX6 is not set +# CONFIG_CB710_CORE is not set CONFIG_HAVE_IDE=y CONFIG_IDE=y @@ -502,14 +524,17 @@ CONFIG_BLK_DEV_IDEDMA=y # # -# Enable only one of the two stacks, unless you know what you are doing +# You can enable one or both FireWire driver stacks. +# + +# +# See the help texts for more information. # # CONFIG_FIREWIRE is not set # CONFIG_IEEE1394 is not set # CONFIG_I2O is not set # CONFIG_MACINTOSH_DRIVERS is not set CONFIG_NETDEVICES=y -CONFIG_COMPAT_NET_DEV_OPS=y # CONFIG_DUMMY is not set # CONFIG_BONDING is not set # CONFIG_MACVLAN is not set @@ -556,6 +581,7 @@ CONFIG_MII=y # CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set # CONFIG_NET_PCI is not set # CONFIG_B44 is not set +# CONFIG_KS8842 is not set # CONFIG_ATL2 is not set CONFIG_NETDEV_1000=y # CONFIG_ACENIC is not set @@ -575,8 +601,10 @@ CONFIG_E1000=y # CONFIG_VIA_VELOCITY is not set # CONFIG_TIGON3 is not set # CONFIG_BNX2 is not set +# CONFIG_CNIC is not set CONFIG_FSL_PQ_MDIO=y CONFIG_GIANFAR=y +# CONFIG_MV643XX_ETH is not set # CONFIG_QLA3XXX is not set # CONFIG_ATL1 is not set # CONFIG_ATL1E is not set @@ -698,6 +726,11 @@ CONFIG_GEN_RTC=y CONFIG_DEVPORT=y # CONFIG_I2C is not set # CONFIG_SPI is not set + +# +# PPS support +# +# CONFIG_PPS is not set CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y # CONFIG_GPIOLIB is not set # CONFIG_W1 is not set @@ -737,22 +770,7 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_HTC_PASIC3 is not set # CONFIG_MFD_TMIO is not set # CONFIG_REGULATOR is not set - -# -# Multimedia devices -# - -# -# Multimedia core support -# -# CONFIG_VIDEO_DEV is not set -# CONFIG_DVB_CORE is not set -# CONFIG_VIDEO_MEDIA is not set - -# -# Multimedia drivers -# -CONFIG_DAB=y +# CONFIG_MEDIA_SUPPORT is not set # # Graphics support @@ -809,6 +827,10 @@ CONFIG_USB_ARCH_HAS_EHCI=y # CONFIG_DMADEVICES is not set # CONFIG_AUXDISPLAY is not set # CONFIG_UIO is not set + +# +# TI VLYNQ +# # CONFIG_STAGING is not set # @@ -828,10 +850,12 @@ CONFIG_FS_MBCACHE=y # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set -CONFIG_FILE_LOCKING=y # CONFIG_XFS_FS is not set +# CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set # CONFIG_BTRFS_FS is not set +CONFIG_FILE_LOCKING=y +CONFIG_FSNOTIFY=y CONFIG_DNOTIFY=y CONFIG_INOTIFY=y CONFIG_INOTIFY_USER=y @@ -946,6 +970,7 @@ CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y CONFIG_HAVE_LMB=y CONFIG_NLATTR=y +CONFIG_GENERIC_ATOMIC64=y # # Kernel hacking @@ -976,6 +1001,9 @@ CONFIG_SCHED_DEBUG=y # CONFIG_RT_MUTEX_TESTER is not set # CONFIG_DEBUG_SPINLOCK is not set CONFIG_DEBUG_MUTEXES=y +# CONFIG_DEBUG_LOCK_ALLOC is not set +# CONFIG_PROVE_LOCKING is not set +# CONFIG_LOCK_STAT is not set # CONFIG_DEBUG_SPINLOCK_SLEEP is not set # CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set # CONFIG_DEBUG_KOBJECT is not set @@ -987,7 +1015,6 @@ CONFIG_DEBUG_MUTEXES=y # CONFIG_DEBUG_LIST is not set # CONFIG_DEBUG_SG is not set # CONFIG_DEBUG_NOTIFIERS is not set -# CONFIG_BOOT_PRINTK_DELAY is not set # CONFIG_RCU_TORTURE_TEST is not set # CONFIG_RCU_CPU_STALL_DETECTOR is not set # CONFIG_BACKTRACE_SELF_TEST is not set @@ -1001,16 +1028,15 @@ CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y CONFIG_HAVE_DYNAMIC_FTRACE=y CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y CONFIG_TRACING_SUPPORT=y - -# -# Tracers -# +CONFIG_FTRACE=y # CONFIG_FUNCTION_TRACER is not set +# CONFIG_IRQSOFF_TRACER is not set # CONFIG_SCHED_TRACER is not set -# CONFIG_CONTEXT_SWITCH_TRACER is not set -# CONFIG_EVENT_TRACER is not set +# CONFIG_ENABLE_DEFAULT_TRACERS is not set # CONFIG_BOOT_TRACER is not set -# CONFIG_TRACE_BRANCH_PROFILING is not set +CONFIG_BRANCH_PROFILE_NONE=y +# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set +# CONFIG_PROFILE_ALL_BRANCHES is not set # CONFIG_STACK_TRACER is not set # CONFIG_KMEMTRACE is not set # CONFIG_WORKQUEUE_TRACER is not set @@ -1018,6 +1044,9 @@ CONFIG_TRACING_SUPPORT=y # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y # CONFIG_KGDB is not set +# CONFIG_KMEMCHECK is not set +# CONFIG_PPC_DISABLE_WERROR is not set +CONFIG_PPC_WERROR=y CONFIG_PRINT_STACK_DEPTH=64 # CONFIG_DEBUG_STACKOVERFLOW is not set # CONFIG_DEBUG_STACK_USAGE is not set diff --git a/arch/powerpc/configs/85xx/sbc8548_defconfig b/arch/powerpc/configs/85xx/sbc8548_defconfig index 6c36c9c7abf..2726fca1d69 100644 --- a/arch/powerpc/configs/85xx/sbc8548_defconfig +++ b/arch/powerpc/configs/85xx/sbc8548_defconfig @@ -1,14 +1,14 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.30-rc3 -# Wed May 13 17:22:19 2009 +# Linux kernel version: 2.6.31-rc4 +# Wed Jul 29 23:32:18 2009 # # CONFIG_PPC64 is not set # # Processor support # -# CONFIG_6xx is not set +# CONFIG_PPC_BOOK3S_32 is not set CONFIG_PPC_85xx=y # CONFIG_PPC_8xx is not set # CONFIG_40x is not set @@ -34,15 +34,16 @@ CONFIG_GENERIC_TIME=y CONFIG_GENERIC_TIME_VSYSCALL=y CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_GENERIC_HARDIRQS=y +CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set CONFIG_IRQ_PER_CPU=y CONFIG_STACKTRACE_SUPPORT=y CONFIG_HAVE_LATENCYTOP_SUPPORT=y +CONFIG_TRACE_IRQFLAGS_SUPPORT=y CONFIG_LOCKDEP_SUPPORT=y CONFIG_RWSEM_XCHGADD_ALGORITHM=y CONFIG_ARCH_HAS_ILOG2_U32=y CONFIG_GENERIC_HWEIGHT=y -CONFIG_GENERIC_CALIBRATE_DELAY=y CONFIG_GENERIC_FIND_NEXT_BIT=y # CONFIG_ARCH_NO_VIRT_TO_BUS is not set CONFIG_PPC=y @@ -56,11 +57,13 @@ CONFIG_PPC_UDBG_16550=y # CONFIG_GENERIC_TBSYNC is not set CONFIG_AUDIT_ARCH=y CONFIG_GENERIC_BUG=y +CONFIG_DTC=y CONFIG_DEFAULT_UIMAGE=y # CONFIG_PPC_DCR_NATIVE is not set # CONFIG_PPC_DCR_MMIO is not set CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" +CONFIG_CONSTRUCTORS=y # # General setup @@ -110,7 +113,6 @@ CONFIG_EMBEDDED=y CONFIG_SYSCTL_SYSCALL=y CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_EXTRA_PASS is not set -# CONFIG_STRIP_ASM_SYMS is not set CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y @@ -123,8 +125,15 @@ CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y CONFIG_AIO=y +CONFIG_HAVE_PERF_COUNTERS=y + +# +# Performance Counters +# +# CONFIG_PERF_COUNTERS is not set CONFIG_VM_EVENT_COUNTERS=y CONFIG_PCI_QUIRKS=y +# CONFIG_STRIP_ASM_SYMS is not set CONFIG_COMPAT_BRK=y CONFIG_SLAB=y # CONFIG_SLUB is not set @@ -137,6 +146,10 @@ CONFIG_HAVE_IOREMAP_PROT=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_ARCH_TRACEHOOK=y + +# +# GCOV-based kernel profiling +# # CONFIG_SLOW_WORK is not set # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y @@ -144,7 +157,7 @@ CONFIG_RT_MUTEXES=y CONFIG_BASE_SMALL=0 # CONFIG_MODULES is not set CONFIG_BLOCK=y -# CONFIG_LBD is not set +CONFIG_LBDAF=y # CONFIG_BLK_DEV_BSG is not set # CONFIG_BLK_DEV_INTEGRITY is not set @@ -177,6 +190,7 @@ CONFIG_MPC85xx=y # CONFIG_MPC85xx_DS is not set # CONFIG_SOCRATES is not set # CONFIG_KSI8560 is not set +# CONFIG_XES_MPC85xx is not set # CONFIG_STX_GP3 is not set # CONFIG_TQM8540 is not set # CONFIG_TQM8541 is not set @@ -224,6 +238,7 @@ CONFIG_BINFMT_ELF=y CONFIG_BINFMT_MISC=y CONFIG_MATH_EMULATION=y # CONFIG_IOMMU_HELPER is not set +# CONFIG_SWIOTLB is not set CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y CONFIG_ARCH_HAS_WALK_MEMORY=y CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y @@ -242,9 +257,9 @@ CONFIG_MIGRATION=y CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y -CONFIG_UNEVICTABLE_LRU=y CONFIG_HAVE_MLOCK=y CONFIG_HAVE_MLOCKED_PAGE_BIT=y +CONFIG_DEFAULT_MMAP_MIN_ADDR=4096 CONFIG_PPC_4K_PAGES=y # CONFIG_PPC_16K_PAGES is not set # CONFIG_PPC_64K_PAGES is not set @@ -354,6 +369,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set # CONFIG_PHONET is not set +# CONFIG_IEEE802154 is not set # CONFIG_NET_SCHED is not set # CONFIG_DCB is not set @@ -371,7 +387,11 @@ CONFIG_WIRELESS=y CONFIG_WIRELESS_OLD_REGULATORY=y # CONFIG_WIRELESS_EXT is not set # CONFIG_LIB80211 is not set -# CONFIG_MAC80211 is not set + +# +# CFG80211 needs to be enabled for MAC80211 +# +CONFIG_MAC80211_DEFAULT_PS_VALUE=0 # CONFIG_WIMAX is not set # CONFIG_RFKILL is not set # CONFIG_NET_9P is not set @@ -391,6 +411,7 @@ CONFIG_PREVENT_FIRMWARE_BUILD=y # CONFIG_CONNECTOR is not set # CONFIG_MTD is not set CONFIG_OF_DEVICE=y +CONFIG_OF_MDIO=y # CONFIG_PARPORT is not set CONFIG_BLK_DEV=y # CONFIG_BLK_DEV_FD is not set @@ -422,6 +443,7 @@ CONFIG_MISC_DEVICES=y # EEPROM support # # CONFIG_EEPROM_93CX6 is not set +# CONFIG_CB710_CORE is not set CONFIG_HAVE_IDE=y # CONFIG_IDE is not set @@ -441,14 +463,17 @@ CONFIG_HAVE_IDE=y # # -# Enable only one of the two stacks, unless you know what you are doing +# You can enable one or both FireWire driver stacks. +# + +# +# See the help texts for more information. # # CONFIG_FIREWIRE is not set # CONFIG_IEEE1394 is not set # CONFIG_I2O is not set # CONFIG_MACINTOSH_DRIVERS is not set CONFIG_NETDEVICES=y -CONFIG_COMPAT_NET_DEV_OPS=y # CONFIG_DUMMY is not set # CONFIG_BONDING is not set # CONFIG_MACVLAN is not set @@ -495,6 +520,7 @@ CONFIG_MII=y # CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set # CONFIG_NET_PCI is not set # CONFIG_B44 is not set +# CONFIG_KS8842 is not set # CONFIG_ATL2 is not set CONFIG_NETDEV_1000=y # CONFIG_ACENIC is not set @@ -514,8 +540,10 @@ CONFIG_NETDEV_1000=y # CONFIG_VIA_VELOCITY is not set # CONFIG_TIGON3 is not set # CONFIG_BNX2 is not set +# CONFIG_CNIC is not set CONFIG_FSL_PQ_MDIO=y CONFIG_GIANFAR=y +# CONFIG_MV643XX_ETH is not set # CONFIG_QLA3XXX is not set # CONFIG_ATL1 is not set # CONFIG_ATL1E is not set @@ -637,6 +665,11 @@ CONFIG_GEN_RTC=y CONFIG_DEVPORT=y # CONFIG_I2C is not set # CONFIG_SPI is not set + +# +# PPS support +# +# CONFIG_PPS is not set CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y # CONFIG_GPIOLIB is not set # CONFIG_W1 is not set @@ -676,22 +709,7 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_HTC_PASIC3 is not set # CONFIG_MFD_TMIO is not set # CONFIG_REGULATOR is not set - -# -# Multimedia devices -# - -# -# Multimedia core support -# -# CONFIG_VIDEO_DEV is not set -# CONFIG_DVB_CORE is not set -# CONFIG_VIDEO_MEDIA is not set - -# -# Multimedia drivers -# -CONFIG_DAB=y +# CONFIG_MEDIA_SUPPORT is not set # # Graphics support @@ -721,6 +739,10 @@ CONFIG_VIDEO_OUTPUT_CONTROL=y # CONFIG_DMADEVICES is not set # CONFIG_AUXDISPLAY is not set # CONFIG_UIO is not set + +# +# TI VLYNQ +# # CONFIG_STAGING is not set # @@ -732,10 +754,12 @@ CONFIG_VIDEO_OUTPUT_CONTROL=y # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set -CONFIG_FILE_LOCKING=y # CONFIG_XFS_FS is not set +# CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set # CONFIG_BTRFS_FS is not set +CONFIG_FILE_LOCKING=y +CONFIG_FSNOTIFY=y CONFIG_DNOTIFY=y CONFIG_INOTIFY=y CONFIG_INOTIFY_USER=y @@ -838,6 +862,7 @@ CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y CONFIG_HAVE_LMB=y CONFIG_NLATTR=y +CONFIG_GENERIC_ATOMIC64=y # # Kernel hacking @@ -861,22 +886,11 @@ CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y CONFIG_HAVE_DYNAMIC_FTRACE=y CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y CONFIG_TRACING_SUPPORT=y - -# -# Tracers -# -# CONFIG_FUNCTION_TRACER is not set -# CONFIG_SCHED_TRACER is not set -# CONFIG_CONTEXT_SWITCH_TRACER is not set -# CONFIG_EVENT_TRACER is not set -# CONFIG_BOOT_TRACER is not set -# CONFIG_TRACE_BRANCH_PROFILING is not set -# CONFIG_STACK_TRACER is not set -# CONFIG_KMEMTRACE is not set -# CONFIG_WORKQUEUE_TRACER is not set -# CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_FTRACE is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y +# CONFIG_PPC_DISABLE_WERROR is not set +CONFIG_PPC_WERROR=y CONFIG_PRINT_STACK_DEPTH=64 # CONFIG_IRQSTACKS is not set # CONFIG_PPC_EARLY_DEBUG is not set diff --git a/arch/powerpc/configs/85xx/sbc8560_defconfig b/arch/powerpc/configs/85xx/sbc8560_defconfig index 4aaf1a6bdc7..b0c469823b0 100644 --- a/arch/powerpc/configs/85xx/sbc8560_defconfig +++ b/arch/powerpc/configs/85xx/sbc8560_defconfig @@ -1,14 +1,14 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.30-rc3 -# Wed May 13 17:22:20 2009 +# Linux kernel version: 2.6.31-rc4 +# Wed Jul 29 23:32:19 2009 # # CONFIG_PPC64 is not set # # Processor support # -# CONFIG_6xx is not set +# CONFIG_PPC_BOOK3S_32 is not set CONFIG_PPC_85xx=y # CONFIG_PPC_8xx is not set # CONFIG_40x is not set @@ -34,15 +34,16 @@ CONFIG_GENERIC_TIME=y CONFIG_GENERIC_TIME_VSYSCALL=y CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_GENERIC_HARDIRQS=y +CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set CONFIG_IRQ_PER_CPU=y CONFIG_STACKTRACE_SUPPORT=y CONFIG_HAVE_LATENCYTOP_SUPPORT=y +CONFIG_TRACE_IRQFLAGS_SUPPORT=y CONFIG_LOCKDEP_SUPPORT=y CONFIG_RWSEM_XCHGADD_ALGORITHM=y CONFIG_ARCH_HAS_ILOG2_U32=y CONFIG_GENERIC_HWEIGHT=y -CONFIG_GENERIC_CALIBRATE_DELAY=y CONFIG_GENERIC_FIND_NEXT_BIT=y # CONFIG_ARCH_NO_VIRT_TO_BUS is not set CONFIG_PPC=y @@ -56,11 +57,13 @@ CONFIG_PPC_UDBG_16550=y # CONFIG_GENERIC_TBSYNC is not set CONFIG_AUDIT_ARCH=y CONFIG_GENERIC_BUG=y +CONFIG_DTC=y CONFIG_DEFAULT_UIMAGE=y # CONFIG_PPC_DCR_NATIVE is not set # CONFIG_PPC_DCR_MMIO is not set CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" +CONFIG_CONSTRUCTORS=y # # General setup @@ -111,7 +114,6 @@ CONFIG_SYSCTL_SYSCALL=y CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_ALL is not set # CONFIG_KALLSYMS_EXTRA_PASS is not set -# CONFIG_STRIP_ASM_SYMS is not set CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y @@ -124,7 +126,14 @@ CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y CONFIG_AIO=y +CONFIG_HAVE_PERF_COUNTERS=y + +# +# Performance Counters +# +# CONFIG_PERF_COUNTERS is not set CONFIG_VM_EVENT_COUNTERS=y +# CONFIG_STRIP_ASM_SYMS is not set CONFIG_COMPAT_BRK=y CONFIG_SLAB=y # CONFIG_SLUB is not set @@ -137,6 +146,10 @@ CONFIG_HAVE_IOREMAP_PROT=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_ARCH_TRACEHOOK=y + +# +# GCOV-based kernel profiling +# # CONFIG_SLOW_WORK is not set # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y @@ -144,7 +157,7 @@ CONFIG_RT_MUTEXES=y CONFIG_BASE_SMALL=0 # CONFIG_MODULES is not set CONFIG_BLOCK=y -# CONFIG_LBD is not set +CONFIG_LBDAF=y # CONFIG_BLK_DEV_BSG is not set # CONFIG_BLK_DEV_INTEGRITY is not set @@ -177,6 +190,7 @@ CONFIG_MPC85xx=y # CONFIG_MPC85xx_DS is not set # CONFIG_SOCRATES is not set # CONFIG_KSI8560 is not set +# CONFIG_XES_MPC85xx is not set # CONFIG_STX_GP3 is not set # CONFIG_TQM8540 is not set # CONFIG_TQM8541 is not set @@ -224,6 +238,7 @@ CONFIG_BINFMT_ELF=y CONFIG_BINFMT_MISC=y # CONFIG_MATH_EMULATION is not set # CONFIG_IOMMU_HELPER is not set +# CONFIG_SWIOTLB is not set CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y CONFIG_ARCH_HAS_WALK_MEMORY=y CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y @@ -242,9 +257,9 @@ CONFIG_MIGRATION=y CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y -CONFIG_UNEVICTABLE_LRU=y CONFIG_HAVE_MLOCK=y CONFIG_HAVE_MLOCKED_PAGE_BIT=y +CONFIG_DEFAULT_MMAP_MIN_ADDR=4096 CONFIG_PPC_4K_PAGES=y # CONFIG_PPC_16K_PAGES is not set # CONFIG_PPC_64K_PAGES is not set @@ -346,6 +361,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set # CONFIG_PHONET is not set +# CONFIG_IEEE802154 is not set # CONFIG_NET_SCHED is not set # CONFIG_DCB is not set @@ -363,7 +379,11 @@ CONFIG_WIRELESS=y CONFIG_WIRELESS_OLD_REGULATORY=y # CONFIG_WIRELESS_EXT is not set # CONFIG_LIB80211 is not set -# CONFIG_MAC80211 is not set + +# +# CFG80211 needs to be enabled for MAC80211 +# +CONFIG_MAC80211_DEFAULT_PS_VALUE=0 # CONFIG_WIMAX is not set # CONFIG_RFKILL is not set # CONFIG_NET_9P is not set @@ -385,6 +405,7 @@ CONFIG_PREVENT_FIRMWARE_BUILD=y # CONFIG_CONNECTOR is not set # CONFIG_MTD is not set CONFIG_OF_DEVICE=y +CONFIG_OF_MDIO=y # CONFIG_PARPORT is not set CONFIG_BLK_DEV=y # CONFIG_BLK_DEV_FD is not set @@ -421,7 +442,6 @@ CONFIG_HAVE_IDE=y # CONFIG_MD is not set # CONFIG_MACINTOSH_DRIVERS is not set CONFIG_NETDEVICES=y -CONFIG_COMPAT_NET_DEV_OPS=y # CONFIG_DUMMY is not set # CONFIG_BONDING is not set # CONFIG_MACVLAN is not set @@ -460,9 +480,11 @@ CONFIG_MII=y # CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set # CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set # CONFIG_B44 is not set +# CONFIG_KS8842 is not set CONFIG_NETDEV_1000=y CONFIG_FSL_PQ_MDIO=y CONFIG_GIANFAR=y +# CONFIG_MV643XX_ETH is not set CONFIG_NETDEV_10000=y # @@ -551,6 +573,11 @@ CONFIG_LEGACY_PTY_COUNT=256 # CONFIG_TCG_TPM is not set # CONFIG_I2C is not set # CONFIG_SPI is not set + +# +# PPS support +# +# CONFIG_PPS is not set CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y # CONFIG_GPIOLIB is not set # CONFIG_W1 is not set @@ -586,22 +613,7 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_HTC_PASIC3 is not set # CONFIG_MFD_TMIO is not set # CONFIG_REGULATOR is not set - -# -# Multimedia devices -# - -# -# Multimedia core support -# -# CONFIG_VIDEO_DEV is not set -# CONFIG_DVB_CORE is not set -# CONFIG_VIDEO_MEDIA is not set - -# -# Multimedia drivers -# -CONFIG_DAB=y +# CONFIG_MEDIA_SUPPORT is not set # # Graphics support @@ -690,6 +702,10 @@ CONFIG_RTC_DRV_M48T59=y # CONFIG_DMADEVICES is not set # CONFIG_AUXDISPLAY is not set # CONFIG_UIO is not set + +# +# TI VLYNQ +# # CONFIG_STAGING is not set # @@ -701,10 +717,12 @@ CONFIG_RTC_DRV_M48T59=y # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set -CONFIG_FILE_LOCKING=y # CONFIG_XFS_FS is not set +# CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set # CONFIG_BTRFS_FS is not set +CONFIG_FILE_LOCKING=y +CONFIG_FSNOTIFY=y CONFIG_DNOTIFY=y CONFIG_INOTIFY=y CONFIG_INOTIFY_USER=y @@ -819,6 +837,7 @@ CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y CONFIG_HAVE_LMB=y CONFIG_NLATTR=y +CONFIG_GENERIC_ATOMIC64=y # # Kernel hacking @@ -848,6 +867,9 @@ CONFIG_SCHED_DEBUG=y # CONFIG_RT_MUTEX_TESTER is not set # CONFIG_DEBUG_SPINLOCK is not set CONFIG_DEBUG_MUTEXES=y +# CONFIG_DEBUG_LOCK_ALLOC is not set +# CONFIG_PROVE_LOCKING is not set +# CONFIG_LOCK_STAT is not set # CONFIG_DEBUG_SPINLOCK_SLEEP is not set # CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set # CONFIG_DEBUG_KOBJECT is not set @@ -859,7 +881,6 @@ CONFIG_DEBUG_MUTEXES=y # CONFIG_DEBUG_LIST is not set # CONFIG_DEBUG_SG is not set # CONFIG_DEBUG_NOTIFIERS is not set -# CONFIG_BOOT_PRINTK_DELAY is not set # CONFIG_RCU_TORTURE_TEST is not set # CONFIG_RCU_CPU_STALL_DETECTOR is not set # CONFIG_BACKTRACE_SELF_TEST is not set @@ -873,16 +894,15 @@ CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y CONFIG_HAVE_DYNAMIC_FTRACE=y CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y CONFIG_TRACING_SUPPORT=y - -# -# Tracers -# +CONFIG_FTRACE=y # CONFIG_FUNCTION_TRACER is not set +# CONFIG_IRQSOFF_TRACER is not set # CONFIG_SCHED_TRACER is not set -# CONFIG_CONTEXT_SWITCH_TRACER is not set -# CONFIG_EVENT_TRACER is not set +# CONFIG_ENABLE_DEFAULT_TRACERS is not set # CONFIG_BOOT_TRACER is not set -# CONFIG_TRACE_BRANCH_PROFILING is not set +CONFIG_BRANCH_PROFILE_NONE=y +# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set +# CONFIG_PROFILE_ALL_BRANCHES is not set # CONFIG_STACK_TRACER is not set # CONFIG_KMEMTRACE is not set # CONFIG_WORKQUEUE_TRACER is not set @@ -890,6 +910,9 @@ CONFIG_TRACING_SUPPORT=y # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y # CONFIG_KGDB is not set +# CONFIG_KMEMCHECK is not set +# CONFIG_PPC_DISABLE_WERROR is not set +CONFIG_PPC_WERROR=y CONFIG_PRINT_STACK_DEPTH=64 # CONFIG_DEBUG_STACKOVERFLOW is not set # CONFIG_DEBUG_STACK_USAGE is not set diff --git a/arch/powerpc/configs/85xx/socrates_defconfig b/arch/powerpc/configs/85xx/socrates_defconfig index 79984589db6..04c85dada84 100644 --- a/arch/powerpc/configs/85xx/socrates_defconfig +++ b/arch/powerpc/configs/85xx/socrates_defconfig @@ -1,14 +1,14 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.30-rc3 -# Wed May 13 17:22:21 2009 +# Linux kernel version: 2.6.31-rc4 +# Wed Jul 29 23:32:19 2009 # # CONFIG_PPC64 is not set # # Processor support # -# CONFIG_6xx is not set +# CONFIG_PPC_BOOK3S_32 is not set CONFIG_PPC_85xx=y # CONFIG_PPC_8xx is not set # CONFIG_40x is not set @@ -34,15 +34,16 @@ CONFIG_GENERIC_TIME=y CONFIG_GENERIC_TIME_VSYSCALL=y CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_GENERIC_HARDIRQS=y +CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set CONFIG_IRQ_PER_CPU=y CONFIG_STACKTRACE_SUPPORT=y CONFIG_HAVE_LATENCYTOP_SUPPORT=y +CONFIG_TRACE_IRQFLAGS_SUPPORT=y CONFIG_LOCKDEP_SUPPORT=y CONFIG_RWSEM_XCHGADD_ALGORITHM=y CONFIG_ARCH_HAS_ILOG2_U32=y CONFIG_GENERIC_HWEIGHT=y -CONFIG_GENERIC_CALIBRATE_DELAY=y CONFIG_GENERIC_FIND_NEXT_BIT=y # CONFIG_ARCH_NO_VIRT_TO_BUS is not set CONFIG_PPC=y @@ -56,11 +57,13 @@ CONFIG_PPC_UDBG_16550=y # CONFIG_GENERIC_TBSYNC is not set CONFIG_AUDIT_ARCH=y CONFIG_GENERIC_BUG=y +CONFIG_DTC=y CONFIG_DEFAULT_UIMAGE=y # CONFIG_PPC_DCR_NATIVE is not set # CONFIG_PPC_DCR_MMIO is not set CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" +CONFIG_CONSTRUCTORS=y # # General setup @@ -109,7 +112,6 @@ CONFIG_ANON_INODES=y CONFIG_EMBEDDED=y CONFIG_SYSCTL_SYSCALL=y # CONFIG_KALLSYMS is not set -# CONFIG_STRIP_ASM_SYMS is not set # CONFIG_HOTPLUG is not set CONFIG_PRINTK=y CONFIG_BUG=y @@ -122,9 +124,16 @@ CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y CONFIG_AIO=y +CONFIG_HAVE_PERF_COUNTERS=y + +# +# Performance Counters +# +# CONFIG_PERF_COUNTERS is not set CONFIG_VM_EVENT_COUNTERS=y CONFIG_PCI_QUIRKS=y CONFIG_SLUB_DEBUG=y +# CONFIG_STRIP_ASM_SYMS is not set CONFIG_COMPAT_BRK=y # CONFIG_SLAB is not set CONFIG_SLUB=y @@ -137,6 +146,10 @@ CONFIG_HAVE_IOREMAP_PROT=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_ARCH_TRACEHOOK=y + +# +# GCOV-based kernel profiling +# # CONFIG_SLOW_WORK is not set # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y @@ -149,7 +162,7 @@ CONFIG_MODULE_FORCE_UNLOAD=y # CONFIG_MODVERSIONS is not set # CONFIG_MODULE_SRCVERSION_ALL is not set CONFIG_BLOCK=y -# CONFIG_LBD is not set +CONFIG_LBDAF=y # CONFIG_BLK_DEV_BSG is not set # CONFIG_BLK_DEV_INTEGRITY is not set @@ -182,6 +195,7 @@ CONFIG_MPC85xx=y # CONFIG_MPC85xx_DS is not set CONFIG_SOCRATES=y # CONFIG_KSI8560 is not set +# CONFIG_XES_MPC85xx is not set # CONFIG_STX_GP3 is not set # CONFIG_TQM8540 is not set # CONFIG_TQM8541 is not set @@ -229,6 +243,7 @@ CONFIG_BINFMT_ELF=y # CONFIG_BINFMT_MISC is not set CONFIG_MATH_EMULATION=y # CONFIG_IOMMU_HELPER is not set +# CONFIG_SWIOTLB is not set CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y CONFIG_ARCH_HAS_WALK_MEMORY=y CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y @@ -247,9 +262,9 @@ CONFIG_MIGRATION=y CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y -CONFIG_UNEVICTABLE_LRU=y CONFIG_HAVE_MLOCK=y CONFIG_HAVE_MLOCKED_PAGE_BIT=y +CONFIG_DEFAULT_MMAP_MIN_ADDR=4096 CONFIG_PPC_4K_PAGES=y # CONFIG_PPC_16K_PAGES is not set # CONFIG_PPC_64K_PAGES is not set @@ -357,6 +372,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set # CONFIG_PHONET is not set +# CONFIG_IEEE802154 is not set # CONFIG_NET_SCHED is not set # CONFIG_DCB is not set @@ -373,6 +389,7 @@ CONFIG_CAN_BCM=y # CAN Device Drivers # # CONFIG_CAN_VCAN is not set +# CONFIG_CAN_DEV is not set # CONFIG_CAN_DEBUG_DEVICES is not set # CONFIG_IRDA is not set # CONFIG_BT is not set @@ -382,7 +399,11 @@ CONFIG_WIRELESS=y # CONFIG_WIRELESS_OLD_REGULATORY is not set # CONFIG_WIRELESS_EXT is not set # CONFIG_LIB80211 is not set -# CONFIG_MAC80211 is not set + +# +# CFG80211 needs to be enabled for MAC80211 +# +CONFIG_MAC80211_DEFAULT_PS_VALUE=0 # CONFIG_WIMAX is not set # CONFIG_RFKILL is not set # CONFIG_NET_9P is not set @@ -499,6 +520,7 @@ CONFIG_MTD_NAND_SOCRATES=y CONFIG_OF_DEVICE=y CONFIG_OF_I2C=y CONFIG_OF_SPI=y +CONFIG_OF_MDIO=y # CONFIG_PARPORT is not set CONFIG_BLK_DEV=y # CONFIG_BLK_DEV_FD is not set @@ -535,7 +557,9 @@ CONFIG_MISC_DEVICES=y # CONFIG_EEPROM_AT24 is not set # CONFIG_EEPROM_AT25 is not set # CONFIG_EEPROM_LEGACY is not set +# CONFIG_EEPROM_MAX6875 is not set # CONFIG_EEPROM_93CX6 is not set +# CONFIG_CB710_CORE is not set CONFIG_HAVE_IDE=y # CONFIG_IDE is not set @@ -558,10 +582,6 @@ CONFIG_BLK_DEV_SD=y # CONFIG_BLK_DEV_SR is not set # CONFIG_CHR_DEV_SG is not set # CONFIG_CHR_DEV_SCH is not set - -# -# Some SCSI devices (e.g. CD jukebox) support multiple LUNs -# # CONFIG_SCSI_MULTI_LUN is not set # CONFIG_SCSI_CONSTANTS is not set # CONFIG_SCSI_LOGGING is not set @@ -588,14 +608,17 @@ CONFIG_SCSI_WAIT_SCAN=m # # -# Enable only one of the two stacks, unless you know what you are doing +# You can enable one or both FireWire driver stacks. +# + +# +# See the help texts for more information. # # CONFIG_FIREWIRE is not set # CONFIG_IEEE1394 is not set # CONFIG_I2O is not set # CONFIG_MACINTOSH_DRIVERS is not set CONFIG_NETDEVICES=y -CONFIG_COMPAT_NET_DEV_OPS=y # CONFIG_DUMMY is not set # CONFIG_BONDING is not set # CONFIG_MACVLAN is not set @@ -643,6 +666,8 @@ CONFIG_MII=y # CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set # CONFIG_NET_PCI is not set # CONFIG_B44 is not set +# CONFIG_KS8842 is not set +# CONFIG_KS8851 is not set # CONFIG_ATL2 is not set CONFIG_NETDEV_1000=y # CONFIG_ACENIC is not set @@ -662,8 +687,10 @@ CONFIG_NETDEV_1000=y # CONFIG_VIA_VELOCITY is not set # CONFIG_TIGON3 is not set # CONFIG_BNX2 is not set +# CONFIG_CNIC is not set CONFIG_FSL_PQ_MDIO=y CONFIG_GIANFAR=y +# CONFIG_MV643XX_ETH is not set # CONFIG_QLA3XXX is not set # CONFIG_ATL1 is not set # CONFIG_ATL1E is not set @@ -733,6 +760,7 @@ CONFIG_INPUT_TOUCHSCREEN=y # CONFIG_TOUCHSCREEN_AD7879_I2C is not set # CONFIG_TOUCHSCREEN_AD7879_SPI is not set # CONFIG_TOUCHSCREEN_AD7879 is not set +# CONFIG_TOUCHSCREEN_EETI is not set # CONFIG_TOUCHSCREEN_FUJITSU is not set # CONFIG_TOUCHSCREEN_GUNZE is not set # CONFIG_TOUCHSCREEN_ELO is not set @@ -746,6 +774,7 @@ CONFIG_INPUT_TOUCHSCREEN=y # CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set # CONFIG_TOUCHSCREEN_TOUCHIT213 is not set # CONFIG_TOUCHSCREEN_TSC2007 is not set +# CONFIG_TOUCHSCREEN_W90X900 is not set # CONFIG_INPUT_MISC is not set # @@ -862,7 +891,6 @@ CONFIG_I2C_MPC=y # CONFIG_SENSORS_PCF8574 is not set # CONFIG_PCF8575 is not set # CONFIG_SENSORS_PCA9539 is not set -# CONFIG_SENSORS_MAX6875 is not set # CONFIG_SENSORS_TSL2550 is not set # CONFIG_I2C_DEBUG_CORE is not set # CONFIG_I2C_DEBUG_ALGO is not set @@ -875,12 +903,18 @@ CONFIG_SPI_MASTER=y # SPI Master Controller Drivers # # CONFIG_SPI_BITBANG is not set +# CONFIG_SPI_MPC8xxx is not set # # SPI Protocol Masters # # CONFIG_SPI_SPIDEV is not set # CONFIG_SPI_TLE62X0 is not set + +# +# PPS support +# +# CONFIG_PPS is not set CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y # CONFIG_GPIOLIB is not set # CONFIG_W1 is not set @@ -938,6 +972,7 @@ CONFIG_SENSORS_LM75=y # CONFIG_SENSORS_SMSC47B397 is not set # CONFIG_SENSORS_ADS7828 is not set # CONFIG_SENSORS_THMC50 is not set +# CONFIG_SENSORS_TMP401 is not set # CONFIG_SENSORS_VIA686A is not set # CONFIG_SENSORS_VT1211 is not set # CONFIG_SENSORS_VT8231 is not set @@ -973,24 +1008,10 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_MFD_WM8400 is not set # CONFIG_MFD_WM8350_I2C is not set # CONFIG_MFD_PCF50633 is not set +# CONFIG_AB3100_CORE is not set +# CONFIG_EZX_PCAP is not set # CONFIG_REGULATOR is not set - -# -# Multimedia devices -# - -# -# Multimedia core support -# -# CONFIG_VIDEO_DEV is not set -# CONFIG_DVB_CORE is not set -# CONFIG_VIDEO_MEDIA is not set - -# -# Multimedia drivers -# -CONFIG_DAB=y -# CONFIG_USB_DABUSB is not set +# CONFIG_MEDIA_SUPPORT is not set # # Graphics support @@ -1110,7 +1131,7 @@ CONFIG_USB_HID=y # CONFIG_HID_CHERRY is not set # CONFIG_HID_CHICONY is not set # CONFIG_HID_CYPRESS is not set -# CONFIG_DRAGONRISE_FF is not set +# CONFIG_HID_DRAGONRISE is not set # CONFIG_HID_EZKEY is not set # CONFIG_HID_KYE is not set # CONFIG_HID_GYRATION is not set @@ -1124,10 +1145,11 @@ CONFIG_USB_HID=y # CONFIG_HID_SAMSUNG is not set # CONFIG_HID_SONY is not set # CONFIG_HID_SUNPLUS is not set -# CONFIG_GREENASIA_FF is not set +# CONFIG_HID_GREENASIA is not set +# CONFIG_HID_SMARTJOYPLUS is not set # CONFIG_HID_TOPSEED is not set -# CONFIG_THRUSTMASTER_FF is not set -# CONFIG_ZEROPLUS_FF is not set +# CONFIG_HID_THRUSTMASTER is not set +# CONFIG_HID_ZEROPLUS is not set CONFIG_USB_SUPPORT=y CONFIG_USB_ARCH_HAS_HCD=y CONFIG_USB_ARCH_HAS_OHCI=y @@ -1153,6 +1175,7 @@ CONFIG_USB_MON=y # USB Host Controller Drivers # # CONFIG_USB_C67X00_HCD is not set +# CONFIG_USB_XHCI_HCD is not set CONFIG_USB_EHCI_HCD=y # CONFIG_USB_EHCI_ROOT_HUB_TT is not set # CONFIG_USB_EHCI_TT_NEWSCHED is not set @@ -1162,9 +1185,9 @@ CONFIG_USB_EHCI_HCD_PPC_OF=y # CONFIG_USB_ISP116X_HCD is not set # CONFIG_USB_ISP1760_HCD is not set CONFIG_USB_OHCI_HCD=y -CONFIG_USB_OHCI_HCD_PPC_OF=y CONFIG_USB_OHCI_HCD_PPC_OF_BE=y # CONFIG_USB_OHCI_HCD_PPC_OF_LE is not set +CONFIG_USB_OHCI_HCD_PPC_OF=y CONFIG_USB_OHCI_HCD_PCI=y CONFIG_USB_OHCI_BIG_ENDIAN_DESC=y CONFIG_USB_OHCI_BIG_ENDIAN_MMIO=y @@ -1284,6 +1307,7 @@ CONFIG_RTC_INTF_DEV=y # CONFIG_RTC_DRV_S35390A is not set # CONFIG_RTC_DRV_FM3130 is not set # CONFIG_RTC_DRV_RX8581 is not set +# CONFIG_RTC_DRV_RX8025 is not set # # SPI RTC drivers @@ -1318,6 +1342,10 @@ CONFIG_RTC_INTF_DEV=y # CONFIG_DMADEVICES is not set # CONFIG_AUXDISPLAY is not set # CONFIG_UIO is not set + +# +# TI VLYNQ +# # CONFIG_STAGING is not set # @@ -1337,10 +1365,12 @@ CONFIG_FS_MBCACHE=y # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set -CONFIG_FILE_LOCKING=y # CONFIG_XFS_FS is not set +# CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set # CONFIG_BTRFS_FS is not set +CONFIG_FILE_LOCKING=y +CONFIG_FSNOTIFY=y CONFIG_DNOTIFY=y CONFIG_INOTIFY=y CONFIG_INOTIFY_USER=y @@ -1449,7 +1479,46 @@ CONFIG_MSDOS_PARTITION=y # CONFIG_KARMA_PARTITION is not set # CONFIG_EFI_PARTITION is not set # CONFIG_SYSV68_PARTITION is not set -# CONFIG_NLS is not set +CONFIG_NLS=y +CONFIG_NLS_DEFAULT="iso8859-1" +# CONFIG_NLS_CODEPAGE_437 is not set +# CONFIG_NLS_CODEPAGE_737 is not set +# CONFIG_NLS_CODEPAGE_775 is not set +# CONFIG_NLS_CODEPAGE_850 is not set +# CONFIG_NLS_CODEPAGE_852 is not set +# CONFIG_NLS_CODEPAGE_855 is not set +# CONFIG_NLS_CODEPAGE_857 is not set +# CONFIG_NLS_CODEPAGE_860 is not set +# CONFIG_NLS_CODEPAGE_861 is not set +# CONFIG_NLS_CODEPAGE_862 is not set +# CONFIG_NLS_CODEPAGE_863 is not set +# CONFIG_NLS_CODEPAGE_864 is not set +# CONFIG_NLS_CODEPAGE_865 is not set +# CONFIG_NLS_CODEPAGE_866 is not set +# CONFIG_NLS_CODEPAGE_869 is not set +# CONFIG_NLS_CODEPAGE_936 is not set +# CONFIG_NLS_CODEPAGE_950 is not set +# CONFIG_NLS_CODEPAGE_932 is not set +# CONFIG_NLS_CODEPAGE_949 is not set +# CONFIG_NLS_CODEPAGE_874 is not set +# CONFIG_NLS_ISO8859_8 is not set +# CONFIG_NLS_CODEPAGE_1250 is not set +# CONFIG_NLS_CODEPAGE_1251 is not set +# CONFIG_NLS_ASCII is not set +# CONFIG_NLS_ISO8859_1 is not set +# CONFIG_NLS_ISO8859_2 is not set +# CONFIG_NLS_ISO8859_3 is not set +# CONFIG_NLS_ISO8859_4 is not set +# CONFIG_NLS_ISO8859_5 is not set +# CONFIG_NLS_ISO8859_6 is not set +# CONFIG_NLS_ISO8859_7 is not set +# CONFIG_NLS_ISO8859_9 is not set +# CONFIG_NLS_ISO8859_13 is not set +# CONFIG_NLS_ISO8859_14 is not set +# CONFIG_NLS_ISO8859_15 is not set +# CONFIG_NLS_KOI8_R is not set +# CONFIG_NLS_KOI8_U is not set +# CONFIG_NLS_UTF8 is not set # CONFIG_DLM is not set # CONFIG_BINARY_PRINTF is not set @@ -1473,6 +1542,7 @@ CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y CONFIG_HAVE_LMB=y CONFIG_NLATTR=y +CONFIG_GENERIC_ATOMIC64=y # # Kernel hacking @@ -1498,22 +1568,11 @@ CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y CONFIG_HAVE_DYNAMIC_FTRACE=y CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y CONFIG_TRACING_SUPPORT=y - -# -# Tracers -# -# CONFIG_FUNCTION_TRACER is not set -# CONFIG_SCHED_TRACER is not set -# CONFIG_CONTEXT_SWITCH_TRACER is not set -# CONFIG_EVENT_TRACER is not set -# CONFIG_BOOT_TRACER is not set -# CONFIG_TRACE_BRANCH_PROFILING is not set -# CONFIG_STACK_TRACER is not set -# CONFIG_KMEMTRACE is not set -# CONFIG_WORKQUEUE_TRACER is not set -# CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_FTRACE is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y +# CONFIG_PPC_DISABLE_WERROR is not set +CONFIG_PPC_WERROR=y CONFIG_PRINT_STACK_DEPTH=64 # CONFIG_IRQSTACKS is not set # CONFIG_PPC_EARLY_DEBUG is not set diff --git a/arch/powerpc/configs/85xx/stx_gp3_defconfig b/arch/powerpc/configs/85xx/stx_gp3_defconfig index bd1bfcddbd0..e7e81d6769f 100644 --- a/arch/powerpc/configs/85xx/stx_gp3_defconfig +++ b/arch/powerpc/configs/85xx/stx_gp3_defconfig @@ -1,14 +1,14 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.30-rc3 -# Wed May 13 17:22:22 2009 +# Linux kernel version: 2.6.31-rc4 +# Wed Jul 29 23:32:20 2009 # # CONFIG_PPC64 is not set # # Processor support # -# CONFIG_6xx is not set +# CONFIG_PPC_BOOK3S_32 is not set CONFIG_PPC_85xx=y # CONFIG_PPC_8xx is not set # CONFIG_40x is not set @@ -34,15 +34,16 @@ CONFIG_GENERIC_TIME=y CONFIG_GENERIC_TIME_VSYSCALL=y CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_GENERIC_HARDIRQS=y +CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set CONFIG_IRQ_PER_CPU=y CONFIG_STACKTRACE_SUPPORT=y CONFIG_HAVE_LATENCYTOP_SUPPORT=y +CONFIG_TRACE_IRQFLAGS_SUPPORT=y CONFIG_LOCKDEP_SUPPORT=y CONFIG_RWSEM_XCHGADD_ALGORITHM=y CONFIG_ARCH_HAS_ILOG2_U32=y CONFIG_GENERIC_HWEIGHT=y -CONFIG_GENERIC_CALIBRATE_DELAY=y CONFIG_GENERIC_FIND_NEXT_BIT=y CONFIG_GENERIC_GPIO=y # CONFIG_ARCH_NO_VIRT_TO_BUS is not set @@ -57,11 +58,13 @@ CONFIG_PPC_UDBG_16550=y # CONFIG_GENERIC_TBSYNC is not set CONFIG_AUDIT_ARCH=y CONFIG_GENERIC_BUG=y +CONFIG_DTC=y CONFIG_DEFAULT_UIMAGE=y # CONFIG_PPC_DCR_NATIVE is not set # CONFIG_PPC_DCR_MMIO is not set CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" +CONFIG_CONSTRUCTORS=y # # General setup @@ -112,7 +115,6 @@ CONFIG_SYSCTL_SYSCALL=y CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_ALL is not set # CONFIG_KALLSYMS_EXTRA_PASS is not set -# CONFIG_STRIP_ASM_SYMS is not set CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y @@ -125,9 +127,16 @@ CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y CONFIG_AIO=y +CONFIG_HAVE_PERF_COUNTERS=y + +# +# Performance Counters +# +# CONFIG_PERF_COUNTERS is not set CONFIG_VM_EVENT_COUNTERS=y CONFIG_PCI_QUIRKS=y CONFIG_SLUB_DEBUG=y +# CONFIG_STRIP_ASM_SYMS is not set CONFIG_COMPAT_BRK=y # CONFIG_SLAB is not set CONFIG_SLUB=y @@ -142,6 +151,10 @@ CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_ARCH_TRACEHOOK=y CONFIG_HAVE_CLK=y + +# +# GCOV-based kernel profiling +# # CONFIG_SLOW_WORK is not set # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y @@ -153,7 +166,7 @@ CONFIG_MODULES=y CONFIG_MODVERSIONS=y # CONFIG_MODULE_SRCVERSION_ALL is not set CONFIG_BLOCK=y -# CONFIG_LBD is not set +CONFIG_LBDAF=y # CONFIG_BLK_DEV_BSG is not set # CONFIG_BLK_DEV_INTEGRITY is not set @@ -186,6 +199,7 @@ CONFIG_MPC85xx=y # CONFIG_MPC85xx_DS is not set # CONFIG_SOCRATES is not set # CONFIG_KSI8560 is not set +# CONFIG_XES_MPC85xx is not set CONFIG_STX_GP3=y # CONFIG_TQM8540 is not set # CONFIG_TQM8541 is not set @@ -234,6 +248,7 @@ CONFIG_BINFMT_ELF=y CONFIG_BINFMT_MISC=m CONFIG_MATH_EMULATION=y # CONFIG_IOMMU_HELPER is not set +# CONFIG_SWIOTLB is not set CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y CONFIG_ARCH_HAS_WALK_MEMORY=y CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y @@ -252,9 +267,9 @@ CONFIG_MIGRATION=y CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y -CONFIG_UNEVICTABLE_LRU=y CONFIG_HAVE_MLOCK=y CONFIG_HAVE_MLOCKED_PAGE_BIT=y +CONFIG_DEFAULT_MMAP_MIN_ADDR=4096 CONFIG_PPC_4K_PAGES=y # CONFIG_PPC_16K_PAGES is not set # CONFIG_PPC_64K_PAGES is not set @@ -425,6 +440,7 @@ CONFIG_IP_NF_FILTER=m # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set # CONFIG_PHONET is not set +# CONFIG_IEEE802154 is not set # CONFIG_NET_SCHED is not set # CONFIG_DCB is not set @@ -442,7 +458,11 @@ CONFIG_WIRELESS=y CONFIG_WIRELESS_OLD_REGULATORY=y # CONFIG_WIRELESS_EXT is not set # CONFIG_LIB80211 is not set -# CONFIG_MAC80211 is not set + +# +# CFG80211 needs to be enabled for MAC80211 +# +CONFIG_MAC80211_DEFAULT_PS_VALUE=0 # CONFIG_WIMAX is not set # CONFIG_RFKILL is not set # CONFIG_NET_9P is not set @@ -466,6 +486,7 @@ CONFIG_PREVENT_FIRMWARE_BUILD=y CONFIG_OF_DEVICE=y CONFIG_OF_GPIO=y CONFIG_OF_I2C=m +CONFIG_OF_MDIO=y CONFIG_PARPORT=m CONFIG_PARPORT_PC=m # CONFIG_PARPORT_PC_FIFO is not set @@ -507,7 +528,9 @@ CONFIG_MISC_DEVICES=y # # CONFIG_EEPROM_AT24 is not set # CONFIG_EEPROM_LEGACY is not set +# CONFIG_EEPROM_MAX6875 is not set # CONFIG_EEPROM_93CX6 is not set +# CONFIG_CB710_CORE is not set CONFIG_HAVE_IDE=y CONFIG_IDE=y @@ -581,10 +604,6 @@ CONFIG_BLK_DEV_SR=m # CONFIG_BLK_DEV_SR_VENDOR is not set CONFIG_CHR_DEV_SG=m # CONFIG_CHR_DEV_SCH is not set - -# -# Some SCSI devices (e.g. CD jukebox) support multiple LUNs -# CONFIG_SCSI_MULTI_LUN=y CONFIG_SCSI_CONSTANTS=y # CONFIG_SCSI_LOGGING is not set @@ -602,6 +621,7 @@ CONFIG_SCSI_WAIT_SCAN=m CONFIG_SCSI_LOWLEVEL=y # CONFIG_ISCSI_TCP is not set # CONFIG_SCSI_CXGB3_ISCSI is not set +# CONFIG_SCSI_BNX2_ISCSI is not set # CONFIG_BLK_DEV_3W_XXXX_RAID is not set # CONFIG_SCSI_3W_9XXX is not set # CONFIG_SCSI_ACARD is not set @@ -610,6 +630,7 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_SCSI_AIC7XXX_OLD is not set # CONFIG_SCSI_AIC79XX is not set # CONFIG_SCSI_AIC94XX is not set +# CONFIG_SCSI_MVSAS is not set # CONFIG_SCSI_DPT_I2O is not set # CONFIG_SCSI_ADVANSYS is not set # CONFIG_SCSI_ARCMSR is not set @@ -631,7 +652,6 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_SCSI_INIA100 is not set # CONFIG_SCSI_PPA is not set # CONFIG_SCSI_IMM is not set -# CONFIG_SCSI_MVSAS is not set # CONFIG_SCSI_STEX is not set # CONFIG_SCSI_SYM53C8XX_2 is not set # CONFIG_SCSI_QLOGIC_1280 is not set @@ -654,14 +674,17 @@ CONFIG_SCSI_LOWLEVEL=y # # -# Enable only one of the two stacks, unless you know what you are doing +# You can enable one or both FireWire driver stacks. +# + +# +# See the help texts for more information. # # CONFIG_FIREWIRE is not set # CONFIG_IEEE1394 is not set # CONFIG_I2O is not set # CONFIG_MACINTOSH_DRIVERS is not set CONFIG_NETDEVICES=y -CONFIG_COMPAT_NET_DEV_OPS=y # CONFIG_DUMMY is not set # CONFIG_BONDING is not set # CONFIG_MACVLAN is not set @@ -708,6 +731,7 @@ CONFIG_NET_ETHERNET=y # CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set # CONFIG_NET_PCI is not set # CONFIG_B44 is not set +# CONFIG_KS8842 is not set # CONFIG_NET_POCKET is not set # CONFIG_ATL2 is not set # CONFIG_FS_ENET is not set @@ -729,8 +753,10 @@ CONFIG_NETDEV_1000=y # CONFIG_VIA_VELOCITY is not set # CONFIG_TIGON3 is not set # CONFIG_BNX2 is not set +# CONFIG_CNIC is not set CONFIG_FSL_PQ_MDIO=y CONFIG_GIANFAR=y +# CONFIG_MV643XX_ETH is not set # CONFIG_QLA3XXX is not set # CONFIG_ATL1 is not set # CONFIG_ATL1E is not set @@ -802,12 +828,13 @@ CONFIG_INPUT_EVDEV=m # CONFIG_INPUT_KEYBOARD=y CONFIG_KEYBOARD_ATKBD=y -# CONFIG_KEYBOARD_SUNKBD is not set # CONFIG_KEYBOARD_LKKBD is not set -# CONFIG_KEYBOARD_XTKBD is not set +# CONFIG_KEYBOARD_GPIO is not set +# CONFIG_KEYBOARD_MATRIX is not set # CONFIG_KEYBOARD_NEWTON is not set # CONFIG_KEYBOARD_STOWAWAY is not set -# CONFIG_KEYBOARD_GPIO is not set +# CONFIG_KEYBOARD_SUNKBD is not set +# CONFIG_KEYBOARD_XTKBD is not set CONFIG_INPUT_MOUSE=y CONFIG_MOUSE_PS2=y CONFIG_MOUSE_PS2_ALPS=y @@ -821,6 +848,7 @@ CONFIG_MOUSE_PS2_TRACKPOINT=y # CONFIG_MOUSE_BCM5974 is not set # CONFIG_MOUSE_VSXXXAA is not set # CONFIG_MOUSE_GPIO is not set +# CONFIG_MOUSE_SYNAPTICS_I2C is not set # CONFIG_INPUT_JOYSTICK is not set # CONFIG_INPUT_TABLET is not set # CONFIG_INPUT_TOUCHSCREEN is not set @@ -911,6 +939,7 @@ CONFIG_I2C_ALGOBIT=m # I2C system bus drivers (mostly embedded / system-on-chip) # # CONFIG_I2C_CPM is not set +# CONFIG_I2C_DESIGNWARE is not set # CONFIG_I2C_GPIO is not set # CONFIG_I2C_MPC is not set # CONFIG_I2C_OCORES is not set @@ -941,13 +970,17 @@ CONFIG_I2C_ALGOBIT=m # CONFIG_SENSORS_PCF8574 is not set # CONFIG_PCF8575 is not set # CONFIG_SENSORS_PCA9539 is not set -# CONFIG_SENSORS_MAX6875 is not set # CONFIG_SENSORS_TSL2550 is not set # CONFIG_I2C_DEBUG_CORE is not set # CONFIG_I2C_DEBUG_ALGO is not set # CONFIG_I2C_DEBUG_BUS is not set # CONFIG_I2C_DEBUG_CHIP is not set # CONFIG_SPI is not set + +# +# PPS support +# +# CONFIG_PPS is not set CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y CONFIG_ARCH_REQUIRE_GPIOLIB=y CONFIG_GPIOLIB=y @@ -1027,6 +1060,7 @@ CONFIG_HWMON=y # CONFIG_SENSORS_SMSC47B397 is not set # CONFIG_SENSORS_ADS7828 is not set # CONFIG_SENSORS_THMC50 is not set +# CONFIG_SENSORS_TMP401 is not set # CONFIG_SENSORS_VIA686A is not set # CONFIG_SENSORS_VT1211 is not set # CONFIG_SENSORS_VT8231 is not set @@ -1060,23 +1094,9 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_MFD_WM8400 is not set # CONFIG_MFD_WM8350_I2C is not set # CONFIG_MFD_PCF50633 is not set +# CONFIG_AB3100_CORE is not set # CONFIG_REGULATOR is not set - -# -# Multimedia devices -# - -# -# Multimedia core support -# -# CONFIG_VIDEO_DEV is not set -# CONFIG_DVB_CORE is not set -# CONFIG_VIDEO_MEDIA is not set - -# -# Multimedia drivers -# -CONFIG_DAB=y +# CONFIG_MEDIA_SUPPORT is not set # # Graphics support @@ -1143,6 +1163,10 @@ CONFIG_USB_ARCH_HAS_EHCI=y # CONFIG_DMADEVICES is not set # CONFIG_AUXDISPLAY is not set # CONFIG_UIO is not set + +# +# TI VLYNQ +# # CONFIG_STAGING is not set # @@ -1162,10 +1186,12 @@ CONFIG_FS_MBCACHE=y # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set -CONFIG_FILE_LOCKING=y # CONFIG_XFS_FS is not set +# CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set # CONFIG_BTRFS_FS is not set +CONFIG_FILE_LOCKING=y +CONFIG_FSNOTIFY=y CONFIG_DNOTIFY=y CONFIG_INOTIFY=y CONFIG_INOTIFY_USER=y @@ -1316,6 +1342,7 @@ CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y CONFIG_HAVE_LMB=y CONFIG_NLATTR=y +CONFIG_GENERIC_ATOMIC64=y # # Kernel hacking @@ -1346,6 +1373,9 @@ CONFIG_SCHED_DEBUG=y # CONFIG_RT_MUTEX_TESTER is not set # CONFIG_DEBUG_SPINLOCK is not set # CONFIG_DEBUG_MUTEXES is not set +# CONFIG_DEBUG_LOCK_ALLOC is not set +# CONFIG_PROVE_LOCKING is not set +# CONFIG_LOCK_STAT is not set # CONFIG_DEBUG_SPINLOCK_SLEEP is not set # CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set # CONFIG_DEBUG_KOBJECT is not set @@ -1358,7 +1388,6 @@ CONFIG_SCHED_DEBUG=y # CONFIG_DEBUG_LIST is not set # CONFIG_DEBUG_SG is not set # CONFIG_DEBUG_NOTIFIERS is not set -# CONFIG_BOOT_PRINTK_DELAY is not set # CONFIG_RCU_TORTURE_TEST is not set # CONFIG_RCU_CPU_STALL_DETECTOR is not set # CONFIG_BACKTRACE_SELF_TEST is not set @@ -1372,16 +1401,15 @@ CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y CONFIG_HAVE_DYNAMIC_FTRACE=y CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y CONFIG_TRACING_SUPPORT=y - -# -# Tracers -# +CONFIG_FTRACE=y # CONFIG_FUNCTION_TRACER is not set +# CONFIG_IRQSOFF_TRACER is not set # CONFIG_SCHED_TRACER is not set -# CONFIG_CONTEXT_SWITCH_TRACER is not set -# CONFIG_EVENT_TRACER is not set +# CONFIG_ENABLE_DEFAULT_TRACERS is not set # CONFIG_BOOT_TRACER is not set -# CONFIG_TRACE_BRANCH_PROFILING is not set +CONFIG_BRANCH_PROFILE_NONE=y +# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set +# CONFIG_PROFILE_ALL_BRANCHES is not set # CONFIG_STACK_TRACER is not set # CONFIG_KMEMTRACE is not set # CONFIG_WORKQUEUE_TRACER is not set @@ -1389,6 +1417,9 @@ CONFIG_TRACING_SUPPORT=y # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y # CONFIG_KGDB is not set +# CONFIG_KMEMCHECK is not set +# CONFIG_PPC_DISABLE_WERROR is not set +CONFIG_PPC_WERROR=y CONFIG_PRINT_STACK_DEPTH=64 # CONFIG_DEBUG_STACKOVERFLOW is not set # CONFIG_DEBUG_STACK_USAGE is not set diff --git a/arch/powerpc/configs/85xx/tqm8540_defconfig b/arch/powerpc/configs/85xx/tqm8540_defconfig index 767600145fb..2c407523aad 100644 --- a/arch/powerpc/configs/85xx/tqm8540_defconfig +++ b/arch/powerpc/configs/85xx/tqm8540_defconfig @@ -1,14 +1,14 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.30-rc3 -# Wed May 13 17:22:23 2009 +# Linux kernel version: 2.6.31-rc4 +# Wed Jul 29 23:32:21 2009 # # CONFIG_PPC64 is not set # # Processor support # -# CONFIG_6xx is not set +# CONFIG_PPC_BOOK3S_32 is not set CONFIG_PPC_85xx=y # CONFIG_PPC_8xx is not set # CONFIG_40x is not set @@ -34,15 +34,16 @@ CONFIG_GENERIC_TIME=y CONFIG_GENERIC_TIME_VSYSCALL=y CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_GENERIC_HARDIRQS=y +CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set CONFIG_IRQ_PER_CPU=y CONFIG_STACKTRACE_SUPPORT=y CONFIG_HAVE_LATENCYTOP_SUPPORT=y +CONFIG_TRACE_IRQFLAGS_SUPPORT=y CONFIG_LOCKDEP_SUPPORT=y CONFIG_RWSEM_XCHGADD_ALGORITHM=y CONFIG_ARCH_HAS_ILOG2_U32=y CONFIG_GENERIC_HWEIGHT=y -CONFIG_GENERIC_CALIBRATE_DELAY=y CONFIG_GENERIC_FIND_NEXT_BIT=y # CONFIG_ARCH_NO_VIRT_TO_BUS is not set CONFIG_PPC=y @@ -56,11 +57,13 @@ CONFIG_PPC_UDBG_16550=y # CONFIG_GENERIC_TBSYNC is not set CONFIG_AUDIT_ARCH=y CONFIG_GENERIC_BUG=y +CONFIG_DTC=y CONFIG_DEFAULT_UIMAGE=y # CONFIG_PPC_DCR_NATIVE is not set # CONFIG_PPC_DCR_MMIO is not set CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" +CONFIG_CONSTRUCTORS=y # # General setup @@ -109,7 +112,6 @@ CONFIG_ANON_INODES=y CONFIG_EMBEDDED=y CONFIG_SYSCTL_SYSCALL=y # CONFIG_KALLSYMS is not set -# CONFIG_STRIP_ASM_SYMS is not set # CONFIG_HOTPLUG is not set CONFIG_PRINTK=y CONFIG_BUG=y @@ -122,9 +124,16 @@ CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y CONFIG_AIO=y +CONFIG_HAVE_PERF_COUNTERS=y + +# +# Performance Counters +# +# CONFIG_PERF_COUNTERS is not set CONFIG_VM_EVENT_COUNTERS=y CONFIG_PCI_QUIRKS=y CONFIG_SLUB_DEBUG=y +# CONFIG_STRIP_ASM_SYMS is not set CONFIG_COMPAT_BRK=y # CONFIG_SLAB is not set CONFIG_SLUB=y @@ -137,6 +146,10 @@ CONFIG_HAVE_IOREMAP_PROT=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_ARCH_TRACEHOOK=y + +# +# GCOV-based kernel profiling +# # CONFIG_SLOW_WORK is not set # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y @@ -144,7 +157,7 @@ CONFIG_RT_MUTEXES=y CONFIG_BASE_SMALL=0 # CONFIG_MODULES is not set CONFIG_BLOCK=y -# CONFIG_LBD is not set +CONFIG_LBDAF=y # CONFIG_BLK_DEV_BSG is not set # CONFIG_BLK_DEV_INTEGRITY is not set @@ -177,6 +190,7 @@ CONFIG_MPC85xx=y # CONFIG_MPC85xx_DS is not set # CONFIG_SOCRATES is not set # CONFIG_KSI8560 is not set +# CONFIG_XES_MPC85xx is not set # CONFIG_STX_GP3 is not set CONFIG_TQM8540=y # CONFIG_TQM8541 is not set @@ -225,6 +239,7 @@ CONFIG_BINFMT_ELF=y # CONFIG_BINFMT_MISC is not set CONFIG_MATH_EMULATION=y # CONFIG_IOMMU_HELPER is not set +# CONFIG_SWIOTLB is not set CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y CONFIG_ARCH_HAS_WALK_MEMORY=y CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y @@ -243,9 +258,9 @@ CONFIG_MIGRATION=y CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y -CONFIG_UNEVICTABLE_LRU=y CONFIG_HAVE_MLOCK=y CONFIG_HAVE_MLOCKED_PAGE_BIT=y +CONFIG_DEFAULT_MMAP_MIN_ADDR=4096 CONFIG_PPC_4K_PAGES=y # CONFIG_PPC_16K_PAGES is not set # CONFIG_PPC_64K_PAGES is not set @@ -353,6 +368,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set # CONFIG_PHONET is not set +# CONFIG_IEEE802154 is not set # CONFIG_NET_SCHED is not set # CONFIG_DCB is not set @@ -370,7 +386,11 @@ CONFIG_WIRELESS=y CONFIG_WIRELESS_OLD_REGULATORY=y # CONFIG_WIRELESS_EXT is not set # CONFIG_LIB80211 is not set -# CONFIG_MAC80211 is not set + +# +# CFG80211 needs to be enabled for MAC80211 +# +CONFIG_MAC80211_DEFAULT_PS_VALUE=0 # CONFIG_WIMAX is not set # CONFIG_RFKILL is not set # CONFIG_NET_9P is not set @@ -471,6 +491,7 @@ CONFIG_MTD_CFI_UTIL=y # CONFIG_MTD_UBI is not set CONFIG_OF_DEVICE=y CONFIG_OF_I2C=y +CONFIG_OF_MDIO=y # CONFIG_PARPORT is not set CONFIG_BLK_DEV=y # CONFIG_BLK_DEV_FD is not set @@ -505,7 +526,9 @@ CONFIG_MISC_DEVICES=y # # CONFIG_EEPROM_AT24 is not set # CONFIG_EEPROM_LEGACY is not set +# CONFIG_EEPROM_MAX6875 is not set # CONFIG_EEPROM_93CX6 is not set +# CONFIG_CB710_CORE is not set CONFIG_HAVE_IDE=y CONFIG_IDE=y @@ -580,14 +603,17 @@ CONFIG_BLK_DEV_IDEDMA=y # # -# Enable only one of the two stacks, unless you know what you are doing +# You can enable one or both FireWire driver stacks. +# + +# +# See the help texts for more information. # # CONFIG_FIREWIRE is not set # CONFIG_IEEE1394 is not set # CONFIG_I2O is not set # CONFIG_MACINTOSH_DRIVERS is not set CONFIG_NETDEVICES=y -CONFIG_COMPAT_NET_DEV_OPS=y # CONFIG_DUMMY is not set # CONFIG_BONDING is not set # CONFIG_MACVLAN is not set @@ -650,6 +676,7 @@ CONFIG_E100=y # CONFIG_SMSC9420 is not set # CONFIG_SUNDANCE is not set # CONFIG_TLAN is not set +# CONFIG_KS8842 is not set # CONFIG_VIA_RHINE is not set # CONFIG_SC92031 is not set # CONFIG_ATL2 is not set @@ -671,8 +698,10 @@ CONFIG_NETDEV_1000=y # CONFIG_VIA_VELOCITY is not set # CONFIG_TIGON3 is not set # CONFIG_BNX2 is not set +# CONFIG_CNIC is not set CONFIG_FSL_PQ_MDIO=y CONFIG_GIANFAR=y +# CONFIG_MV643XX_ETH is not set # CONFIG_QLA3XXX is not set # CONFIG_ATL1 is not set # CONFIG_ATL1E is not set @@ -850,13 +879,17 @@ CONFIG_I2C_MPC=y # CONFIG_SENSORS_PCF8574 is not set # CONFIG_PCF8575 is not set # CONFIG_SENSORS_PCA9539 is not set -# CONFIG_SENSORS_MAX6875 is not set # CONFIG_SENSORS_TSL2550 is not set # CONFIG_I2C_DEBUG_CORE is not set # CONFIG_I2C_DEBUG_ALGO is not set # CONFIG_I2C_DEBUG_BUS is not set # CONFIG_I2C_DEBUG_CHIP is not set # CONFIG_SPI is not set + +# +# PPS support +# +# CONFIG_PPS is not set CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y # CONFIG_GPIOLIB is not set # CONFIG_W1 is not set @@ -911,6 +944,7 @@ CONFIG_SENSORS_LM75=y # CONFIG_SENSORS_SMSC47B397 is not set # CONFIG_SENSORS_ADS7828 is not set # CONFIG_SENSORS_THMC50 is not set +# CONFIG_SENSORS_TMP401 is not set # CONFIG_SENSORS_VIA686A is not set # CONFIG_SENSORS_VT1211 is not set # CONFIG_SENSORS_VT8231 is not set @@ -945,23 +979,9 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_MFD_WM8400 is not set # CONFIG_MFD_WM8350_I2C is not set # CONFIG_MFD_PCF50633 is not set +# CONFIG_AB3100_CORE is not set # CONFIG_REGULATOR is not set - -# -# Multimedia devices -# - -# -# Multimedia core support -# -# CONFIG_VIDEO_DEV is not set -# CONFIG_DVB_CORE is not set -# CONFIG_VIDEO_MEDIA is not set - -# -# Multimedia drivers -# -CONFIG_DAB=y +# CONFIG_MEDIA_SUPPORT is not set # # Graphics support @@ -1018,6 +1038,10 @@ CONFIG_USB_ARCH_HAS_EHCI=y # CONFIG_DMADEVICES is not set # CONFIG_AUXDISPLAY is not set # CONFIG_UIO is not set + +# +# TI VLYNQ +# # CONFIG_STAGING is not set # @@ -1037,10 +1061,12 @@ CONFIG_FS_MBCACHE=y # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set -CONFIG_FILE_LOCKING=y # CONFIG_XFS_FS is not set +# CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set # CONFIG_BTRFS_FS is not set +CONFIG_FILE_LOCKING=y +CONFIG_FSNOTIFY=y CONFIG_DNOTIFY=y CONFIG_INOTIFY=y CONFIG_INOTIFY_USER=y @@ -1167,6 +1193,7 @@ CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y CONFIG_HAVE_LMB=y CONFIG_NLATTR=y +CONFIG_GENERIC_ATOMIC64=y # # Kernel hacking @@ -1192,22 +1219,11 @@ CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y CONFIG_HAVE_DYNAMIC_FTRACE=y CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y CONFIG_TRACING_SUPPORT=y - -# -# Tracers -# -# CONFIG_FUNCTION_TRACER is not set -# CONFIG_SCHED_TRACER is not set -# CONFIG_CONTEXT_SWITCH_TRACER is not set -# CONFIG_EVENT_TRACER is not set -# CONFIG_BOOT_TRACER is not set -# CONFIG_TRACE_BRANCH_PROFILING is not set -# CONFIG_STACK_TRACER is not set -# CONFIG_KMEMTRACE is not set -# CONFIG_WORKQUEUE_TRACER is not set -# CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_FTRACE is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y +# CONFIG_PPC_DISABLE_WERROR is not set +CONFIG_PPC_WERROR=y CONFIG_PRINT_STACK_DEPTH=64 # CONFIG_IRQSTACKS is not set # CONFIG_PPC_EARLY_DEBUG is not set diff --git a/arch/powerpc/configs/85xx/tqm8541_defconfig b/arch/powerpc/configs/85xx/tqm8541_defconfig index 52fafc006dd..845731dc51c 100644 --- a/arch/powerpc/configs/85xx/tqm8541_defconfig +++ b/arch/powerpc/configs/85xx/tqm8541_defconfig @@ -1,14 +1,14 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.30-rc3 -# Wed May 13 17:22:23 2009 +# Linux kernel version: 2.6.31-rc4 +# Wed Jul 29 23:32:22 2009 # # CONFIG_PPC64 is not set # # Processor support # -# CONFIG_6xx is not set +# CONFIG_PPC_BOOK3S_32 is not set CONFIG_PPC_85xx=y # CONFIG_PPC_8xx is not set # CONFIG_40x is not set @@ -34,15 +34,16 @@ CONFIG_GENERIC_TIME=y CONFIG_GENERIC_TIME_VSYSCALL=y CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_GENERIC_HARDIRQS=y +CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set CONFIG_IRQ_PER_CPU=y CONFIG_STACKTRACE_SUPPORT=y CONFIG_HAVE_LATENCYTOP_SUPPORT=y +CONFIG_TRACE_IRQFLAGS_SUPPORT=y CONFIG_LOCKDEP_SUPPORT=y CONFIG_RWSEM_XCHGADD_ALGORITHM=y CONFIG_ARCH_HAS_ILOG2_U32=y CONFIG_GENERIC_HWEIGHT=y -CONFIG_GENERIC_CALIBRATE_DELAY=y CONFIG_GENERIC_FIND_NEXT_BIT=y CONFIG_GENERIC_GPIO=y # CONFIG_ARCH_NO_VIRT_TO_BUS is not set @@ -57,11 +58,13 @@ CONFIG_PPC_UDBG_16550=y # CONFIG_GENERIC_TBSYNC is not set CONFIG_AUDIT_ARCH=y CONFIG_GENERIC_BUG=y +CONFIG_DTC=y CONFIG_DEFAULT_UIMAGE=y # CONFIG_PPC_DCR_NATIVE is not set # CONFIG_PPC_DCR_MMIO is not set CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" +CONFIG_CONSTRUCTORS=y # # General setup @@ -110,7 +113,6 @@ CONFIG_ANON_INODES=y CONFIG_EMBEDDED=y CONFIG_SYSCTL_SYSCALL=y # CONFIG_KALLSYMS is not set -# CONFIG_STRIP_ASM_SYMS is not set # CONFIG_HOTPLUG is not set CONFIG_PRINTK=y CONFIG_BUG=y @@ -123,9 +125,16 @@ CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y CONFIG_AIO=y +CONFIG_HAVE_PERF_COUNTERS=y + +# +# Performance Counters +# +# CONFIG_PERF_COUNTERS is not set CONFIG_VM_EVENT_COUNTERS=y CONFIG_PCI_QUIRKS=y CONFIG_SLUB_DEBUG=y +# CONFIG_STRIP_ASM_SYMS is not set CONFIG_COMPAT_BRK=y # CONFIG_SLAB is not set CONFIG_SLUB=y @@ -139,6 +148,10 @@ CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_ARCH_TRACEHOOK=y CONFIG_HAVE_CLK=y + +# +# GCOV-based kernel profiling +# # CONFIG_SLOW_WORK is not set # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y @@ -146,7 +159,7 @@ CONFIG_RT_MUTEXES=y CONFIG_BASE_SMALL=0 # CONFIG_MODULES is not set CONFIG_BLOCK=y -# CONFIG_LBD is not set +CONFIG_LBDAF=y # CONFIG_BLK_DEV_BSG is not set # CONFIG_BLK_DEV_INTEGRITY is not set @@ -179,6 +192,7 @@ CONFIG_MPC85xx=y # CONFIG_MPC85xx_DS is not set # CONFIG_SOCRATES is not set # CONFIG_KSI8560 is not set +# CONFIG_XES_MPC85xx is not set # CONFIG_STX_GP3 is not set # CONFIG_TQM8540 is not set CONFIG_TQM8541=y @@ -228,6 +242,7 @@ CONFIG_BINFMT_ELF=y # CONFIG_BINFMT_MISC is not set CONFIG_MATH_EMULATION=y # CONFIG_IOMMU_HELPER is not set +# CONFIG_SWIOTLB is not set CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y CONFIG_ARCH_HAS_WALK_MEMORY=y CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y @@ -246,9 +261,9 @@ CONFIG_MIGRATION=y CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y -CONFIG_UNEVICTABLE_LRU=y CONFIG_HAVE_MLOCK=y CONFIG_HAVE_MLOCKED_PAGE_BIT=y +CONFIG_DEFAULT_MMAP_MIN_ADDR=4096 CONFIG_PPC_4K_PAGES=y # CONFIG_PPC_16K_PAGES is not set # CONFIG_PPC_64K_PAGES is not set @@ -356,6 +371,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set # CONFIG_PHONET is not set +# CONFIG_IEEE802154 is not set # CONFIG_NET_SCHED is not set # CONFIG_DCB is not set @@ -373,7 +389,11 @@ CONFIG_WIRELESS=y CONFIG_WIRELESS_OLD_REGULATORY=y # CONFIG_WIRELESS_EXT is not set # CONFIG_LIB80211 is not set -# CONFIG_MAC80211 is not set + +# +# CFG80211 needs to be enabled for MAC80211 +# +CONFIG_MAC80211_DEFAULT_PS_VALUE=0 # CONFIG_WIMAX is not set # CONFIG_RFKILL is not set # CONFIG_NET_9P is not set @@ -475,6 +495,7 @@ CONFIG_MTD_CFI_UTIL=y CONFIG_OF_DEVICE=y CONFIG_OF_GPIO=y CONFIG_OF_I2C=y +CONFIG_OF_MDIO=y # CONFIG_PARPORT is not set CONFIG_BLK_DEV=y # CONFIG_BLK_DEV_FD is not set @@ -509,7 +530,9 @@ CONFIG_MISC_DEVICES=y # # CONFIG_EEPROM_AT24 is not set # CONFIG_EEPROM_LEGACY is not set +# CONFIG_EEPROM_MAX6875 is not set # CONFIG_EEPROM_93CX6 is not set +# CONFIG_CB710_CORE is not set CONFIG_HAVE_IDE=y CONFIG_IDE=y @@ -584,14 +607,17 @@ CONFIG_BLK_DEV_IDEDMA=y # # -# Enable only one of the two stacks, unless you know what you are doing +# You can enable one or both FireWire driver stacks. +# + +# +# See the help texts for more information. # # CONFIG_FIREWIRE is not set # CONFIG_IEEE1394 is not set # CONFIG_I2O is not set # CONFIG_MACINTOSH_DRIVERS is not set CONFIG_NETDEVICES=y -CONFIG_COMPAT_NET_DEV_OPS=y # CONFIG_DUMMY is not set # CONFIG_BONDING is not set # CONFIG_MACVLAN is not set @@ -654,6 +680,7 @@ CONFIG_E100=y # CONFIG_SMSC9420 is not set # CONFIG_SUNDANCE is not set # CONFIG_TLAN is not set +# CONFIG_KS8842 is not set # CONFIG_VIA_RHINE is not set # CONFIG_SC92031 is not set # CONFIG_ATL2 is not set @@ -676,8 +703,10 @@ CONFIG_NETDEV_1000=y # CONFIG_VIA_VELOCITY is not set # CONFIG_TIGON3 is not set # CONFIG_BNX2 is not set +# CONFIG_CNIC is not set CONFIG_FSL_PQ_MDIO=y CONFIG_GIANFAR=y +# CONFIG_MV643XX_ETH is not set # CONFIG_QLA3XXX is not set # CONFIG_ATL1 is not set # CONFIG_ATL1E is not set @@ -831,6 +860,7 @@ CONFIG_I2C_HELPER_AUTO=y # I2C system bus drivers (mostly embedded / system-on-chip) # # CONFIG_I2C_CPM is not set +# CONFIG_I2C_DESIGNWARE is not set # CONFIG_I2C_GPIO is not set CONFIG_I2C_MPC=y # CONFIG_I2C_OCORES is not set @@ -859,13 +889,17 @@ CONFIG_I2C_MPC=y # CONFIG_SENSORS_PCF8574 is not set # CONFIG_PCF8575 is not set # CONFIG_SENSORS_PCA9539 is not set -# CONFIG_SENSORS_MAX6875 is not set # CONFIG_SENSORS_TSL2550 is not set # CONFIG_I2C_DEBUG_CORE is not set # CONFIG_I2C_DEBUG_ALGO is not set # CONFIG_I2C_DEBUG_BUS is not set # CONFIG_I2C_DEBUG_CHIP is not set # CONFIG_SPI is not set + +# +# PPS support +# +# CONFIG_PPS is not set CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y CONFIG_ARCH_REQUIRE_GPIOLIB=y CONFIG_GPIOLIB=y @@ -944,6 +978,7 @@ CONFIG_SENSORS_LM75=y # CONFIG_SENSORS_SMSC47B397 is not set # CONFIG_SENSORS_ADS7828 is not set # CONFIG_SENSORS_THMC50 is not set +# CONFIG_SENSORS_TMP401 is not set # CONFIG_SENSORS_VIA686A is not set # CONFIG_SENSORS_VT1211 is not set # CONFIG_SENSORS_VT8231 is not set @@ -979,23 +1014,9 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_MFD_WM8400 is not set # CONFIG_MFD_WM8350_I2C is not set # CONFIG_MFD_PCF50633 is not set +# CONFIG_AB3100_CORE is not set # CONFIG_REGULATOR is not set - -# -# Multimedia devices -# - -# -# Multimedia core support -# -# CONFIG_VIDEO_DEV is not set -# CONFIG_DVB_CORE is not set -# CONFIG_VIDEO_MEDIA is not set - -# -# Multimedia drivers -# -CONFIG_DAB=y +# CONFIG_MEDIA_SUPPORT is not set # # Graphics support @@ -1052,6 +1073,10 @@ CONFIG_USB_ARCH_HAS_EHCI=y # CONFIG_DMADEVICES is not set # CONFIG_AUXDISPLAY is not set # CONFIG_UIO is not set + +# +# TI VLYNQ +# # CONFIG_STAGING is not set # @@ -1071,10 +1096,12 @@ CONFIG_FS_MBCACHE=y # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set -CONFIG_FILE_LOCKING=y # CONFIG_XFS_FS is not set +# CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set # CONFIG_BTRFS_FS is not set +CONFIG_FILE_LOCKING=y +CONFIG_FSNOTIFY=y CONFIG_DNOTIFY=y CONFIG_INOTIFY=y CONFIG_INOTIFY_USER=y @@ -1201,6 +1228,7 @@ CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y CONFIG_HAVE_LMB=y CONFIG_NLATTR=y +CONFIG_GENERIC_ATOMIC64=y # # Kernel hacking @@ -1226,22 +1254,11 @@ CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y CONFIG_HAVE_DYNAMIC_FTRACE=y CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y CONFIG_TRACING_SUPPORT=y - -# -# Tracers -# -# CONFIG_FUNCTION_TRACER is not set -# CONFIG_SCHED_TRACER is not set -# CONFIG_CONTEXT_SWITCH_TRACER is not set -# CONFIG_EVENT_TRACER is not set -# CONFIG_BOOT_TRACER is not set -# CONFIG_TRACE_BRANCH_PROFILING is not set -# CONFIG_STACK_TRACER is not set -# CONFIG_KMEMTRACE is not set -# CONFIG_WORKQUEUE_TRACER is not set -# CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_FTRACE is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y +# CONFIG_PPC_DISABLE_WERROR is not set +CONFIG_PPC_WERROR=y CONFIG_PRINT_STACK_DEPTH=64 # CONFIG_IRQSTACKS is not set # CONFIG_PPC_EARLY_DEBUG is not set diff --git a/arch/powerpc/configs/85xx/tqm8548_defconfig b/arch/powerpc/configs/85xx/tqm8548_defconfig index 8b4faae7a9a..4f228a90527 100644 --- a/arch/powerpc/configs/85xx/tqm8548_defconfig +++ b/arch/powerpc/configs/85xx/tqm8548_defconfig @@ -1,14 +1,14 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.30-rc3 -# Wed May 13 17:22:24 2009 +# Linux kernel version: 2.6.31-rc4 +# Wed Jul 29 23:32:23 2009 # # CONFIG_PPC64 is not set # # Processor support # -# CONFIG_6xx is not set +# CONFIG_PPC_BOOK3S_32 is not set CONFIG_PPC_85xx=y # CONFIG_PPC_8xx is not set # CONFIG_40x is not set @@ -34,15 +34,16 @@ CONFIG_GENERIC_TIME=y CONFIG_GENERIC_TIME_VSYSCALL=y CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_GENERIC_HARDIRQS=y +CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set CONFIG_IRQ_PER_CPU=y CONFIG_STACKTRACE_SUPPORT=y CONFIG_HAVE_LATENCYTOP_SUPPORT=y +CONFIG_TRACE_IRQFLAGS_SUPPORT=y CONFIG_LOCKDEP_SUPPORT=y CONFIG_RWSEM_XCHGADD_ALGORITHM=y CONFIG_ARCH_HAS_ILOG2_U32=y CONFIG_GENERIC_HWEIGHT=y -CONFIG_GENERIC_CALIBRATE_DELAY=y CONFIG_GENERIC_FIND_NEXT_BIT=y # CONFIG_ARCH_NO_VIRT_TO_BUS is not set CONFIG_PPC=y @@ -56,11 +57,13 @@ CONFIG_PPC_UDBG_16550=y # CONFIG_GENERIC_TBSYNC is not set CONFIG_AUDIT_ARCH=y CONFIG_GENERIC_BUG=y +CONFIG_DTC=y CONFIG_DEFAULT_UIMAGE=y # CONFIG_PPC_DCR_NATIVE is not set # CONFIG_PPC_DCR_MMIO is not set CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" +CONFIG_CONSTRUCTORS=y # # General setup @@ -111,7 +114,6 @@ CONFIG_SYSCTL_SYSCALL=y CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_ALL is not set # CONFIG_KALLSYMS_EXTRA_PASS is not set -# CONFIG_STRIP_ASM_SYMS is not set CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y @@ -124,9 +126,16 @@ CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y CONFIG_AIO=y +CONFIG_HAVE_PERF_COUNTERS=y + +# +# Performance Counters +# +# CONFIG_PERF_COUNTERS is not set CONFIG_VM_EVENT_COUNTERS=y CONFIG_PCI_QUIRKS=y CONFIG_SLUB_DEBUG=y +# CONFIG_STRIP_ASM_SYMS is not set CONFIG_COMPAT_BRK=y # CONFIG_SLAB is not set CONFIG_SLUB=y @@ -140,6 +149,10 @@ CONFIG_HAVE_IOREMAP_PROT=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_ARCH_TRACEHOOK=y + +# +# GCOV-based kernel profiling +# # CONFIG_SLOW_WORK is not set # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y @@ -152,7 +165,7 @@ CONFIG_MODULE_UNLOAD=y # CONFIG_MODVERSIONS is not set # CONFIG_MODULE_SRCVERSION_ALL is not set CONFIG_BLOCK=y -# CONFIG_LBD is not set +CONFIG_LBDAF=y # CONFIG_BLK_DEV_BSG is not set # CONFIG_BLK_DEV_INTEGRITY is not set @@ -185,6 +198,7 @@ CONFIG_MPC85xx=y # CONFIG_MPC85xx_DS is not set # CONFIG_SOCRATES is not set # CONFIG_KSI8560 is not set +# CONFIG_XES_MPC85xx is not set # CONFIG_STX_GP3 is not set # CONFIG_TQM8540 is not set # CONFIG_TQM8541 is not set @@ -234,6 +248,7 @@ CONFIG_BINFMT_ELF=y CONFIG_BINFMT_MISC=y CONFIG_MATH_EMULATION=y # CONFIG_IOMMU_HELPER is not set +# CONFIG_SWIOTLB is not set CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y CONFIG_ARCH_HAS_WALK_MEMORY=y CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y @@ -252,9 +267,9 @@ CONFIG_MIGRATION=y CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y -CONFIG_UNEVICTABLE_LRU=y CONFIG_HAVE_MLOCK=y CONFIG_HAVE_MLOCKED_PAGE_BIT=y +CONFIG_DEFAULT_MMAP_MIN_ADDR=4096 CONFIG_PPC_4K_PAGES=y # CONFIG_PPC_16K_PAGES is not set # CONFIG_PPC_64K_PAGES is not set @@ -281,6 +296,8 @@ CONFIG_PCI_DOMAINS=y CONFIG_PCI_SYSCALL=y CONFIG_PCIEPORTBUS=y CONFIG_PCIEAER=y +# CONFIG_PCIE_ECRC is not set +# CONFIG_PCIEAER_INJECT is not set # CONFIG_PCIEASPM is not set CONFIG_ARCH_SUPPORTS_MSI=y # CONFIG_PCI_MSI is not set @@ -368,6 +385,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set # CONFIG_PHONET is not set +# CONFIG_IEEE802154 is not set # CONFIG_NET_SCHED is not set # CONFIG_DCB is not set @@ -497,6 +515,7 @@ CONFIG_MTD_NAND_FSL_UPM=y # CONFIG_MTD_UBI is not set CONFIG_OF_DEVICE=y CONFIG_OF_I2C=y +CONFIG_OF_MDIO=y # CONFIG_PARPORT is not set CONFIG_BLK_DEV=y # CONFIG_BLK_DEV_FD is not set @@ -531,7 +550,9 @@ CONFIG_MISC_DEVICES=y # # CONFIG_EEPROM_AT24 is not set # CONFIG_EEPROM_LEGACY is not set +# CONFIG_EEPROM_MAX6875 is not set # CONFIG_EEPROM_93CX6 is not set +# CONFIG_CB710_CORE is not set CONFIG_HAVE_IDE=y # CONFIG_IDE is not set @@ -551,14 +572,17 @@ CONFIG_HAVE_IDE=y # # -# Enable only one of the two stacks, unless you know what you are doing +# You can enable one or both FireWire driver stacks. +# + +# +# See the help texts for more information. # # CONFIG_FIREWIRE is not set # CONFIG_IEEE1394 is not set # CONFIG_I2O is not set # CONFIG_MACINTOSH_DRIVERS is not set CONFIG_NETDEVICES=y -CONFIG_COMPAT_NET_DEV_OPS=y # CONFIG_DUMMY is not set # CONFIG_BONDING is not set # CONFIG_MACVLAN is not set @@ -605,6 +629,7 @@ CONFIG_MII=y # CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set # CONFIG_NET_PCI is not set # CONFIG_B44 is not set +# CONFIG_KS8842 is not set # CONFIG_ATL2 is not set CONFIG_NETDEV_1000=y # CONFIG_ACENIC is not set @@ -624,8 +649,10 @@ CONFIG_NETDEV_1000=y # CONFIG_VIA_VELOCITY is not set # CONFIG_TIGON3 is not set # CONFIG_BNX2 is not set +# CONFIG_CNIC is not set CONFIG_FSL_PQ_MDIO=y CONFIG_GIANFAR=y +# CONFIG_MV643XX_ETH is not set # CONFIG_QLA3XXX is not set # CONFIG_ATL1 is not set # CONFIG_ATL1E is not set @@ -801,13 +828,17 @@ CONFIG_I2C_MPC=y # CONFIG_SENSORS_PCF8574 is not set # CONFIG_PCF8575 is not set # CONFIG_SENSORS_PCA9539 is not set -# CONFIG_SENSORS_MAX6875 is not set # CONFIG_SENSORS_TSL2550 is not set # CONFIG_I2C_DEBUG_CORE is not set # CONFIG_I2C_DEBUG_ALGO is not set # CONFIG_I2C_DEBUG_BUS is not set # CONFIG_I2C_DEBUG_CHIP is not set # CONFIG_SPI is not set + +# +# PPS support +# +# CONFIG_PPS is not set CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y # CONFIG_GPIOLIB is not set # CONFIG_W1 is not set @@ -862,6 +893,7 @@ CONFIG_SENSORS_LM75=y # CONFIG_SENSORS_SMSC47B397 is not set # CONFIG_SENSORS_ADS7828 is not set # CONFIG_SENSORS_THMC50 is not set +# CONFIG_SENSORS_TMP401 is not set # CONFIG_SENSORS_VIA686A is not set # CONFIG_SENSORS_VT1211 is not set # CONFIG_SENSORS_VT8231 is not set @@ -896,23 +928,9 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_MFD_WM8400 is not set # CONFIG_MFD_WM8350_I2C is not set # CONFIG_MFD_PCF50633 is not set +# CONFIG_AB3100_CORE is not set # CONFIG_REGULATOR is not set - -# -# Multimedia devices -# - -# -# Multimedia core support -# -# CONFIG_VIDEO_DEV is not set -# CONFIG_DVB_CORE is not set -# CONFIG_VIDEO_MEDIA is not set - -# -# Multimedia drivers -# -CONFIG_DAB=y +# CONFIG_MEDIA_SUPPORT is not set # # Graphics support @@ -977,6 +995,7 @@ CONFIG_RTC_DRV_DS1307=y # CONFIG_RTC_DRV_S35390A is not set # CONFIG_RTC_DRV_FM3130 is not set # CONFIG_RTC_DRV_RX8581 is not set +# CONFIG_RTC_DRV_RX8025 is not set # # SPI RTC drivers @@ -1004,6 +1023,10 @@ CONFIG_RTC_DRV_DS1307=y # CONFIG_DMADEVICES is not set # CONFIG_AUXDISPLAY is not set # CONFIG_UIO is not set + +# +# TI VLYNQ +# # CONFIG_STAGING is not set # @@ -1015,10 +1038,12 @@ CONFIG_RTC_DRV_DS1307=y # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set -CONFIG_FILE_LOCKING=y # CONFIG_XFS_FS is not set +# CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set # CONFIG_BTRFS_FS is not set +CONFIG_FILE_LOCKING=y +CONFIG_FSNOTIFY=y CONFIG_DNOTIFY=y CONFIG_INOTIFY=y CONFIG_INOTIFY_USER=y @@ -1145,6 +1170,7 @@ CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y CONFIG_HAVE_LMB=y CONFIG_NLATTR=y +CONFIG_GENERIC_ATOMIC64=y # # Kernel hacking @@ -1175,6 +1201,9 @@ CONFIG_SCHED_DEBUG=y # CONFIG_RT_MUTEX_TESTER is not set # CONFIG_DEBUG_SPINLOCK is not set CONFIG_DEBUG_MUTEXES=y +# CONFIG_DEBUG_LOCK_ALLOC is not set +# CONFIG_PROVE_LOCKING is not set +# CONFIG_LOCK_STAT is not set # CONFIG_DEBUG_SPINLOCK_SLEEP is not set # CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set # CONFIG_DEBUG_KOBJECT is not set @@ -1187,7 +1216,6 @@ CONFIG_DEBUG_MUTEXES=y # CONFIG_DEBUG_LIST is not set # CONFIG_DEBUG_SG is not set # CONFIG_DEBUG_NOTIFIERS is not set -# CONFIG_BOOT_PRINTK_DELAY is not set # CONFIG_RCU_TORTURE_TEST is not set # CONFIG_RCU_CPU_STALL_DETECTOR is not set # CONFIG_BACKTRACE_SELF_TEST is not set @@ -1201,16 +1229,15 @@ CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y CONFIG_HAVE_DYNAMIC_FTRACE=y CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y CONFIG_TRACING_SUPPORT=y - -# -# Tracers -# +CONFIG_FTRACE=y # CONFIG_FUNCTION_TRACER is not set +# CONFIG_IRQSOFF_TRACER is not set # CONFIG_SCHED_TRACER is not set -# CONFIG_CONTEXT_SWITCH_TRACER is not set -# CONFIG_EVENT_TRACER is not set +# CONFIG_ENABLE_DEFAULT_TRACERS is not set # CONFIG_BOOT_TRACER is not set -# CONFIG_TRACE_BRANCH_PROFILING is not set +CONFIG_BRANCH_PROFILE_NONE=y +# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set +# CONFIG_PROFILE_ALL_BRANCHES is not set # CONFIG_STACK_TRACER is not set # CONFIG_KMEMTRACE is not set # CONFIG_WORKQUEUE_TRACER is not set @@ -1218,6 +1245,9 @@ CONFIG_TRACING_SUPPORT=y # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y # CONFIG_KGDB is not set +# CONFIG_KMEMCHECK is not set +# CONFIG_PPC_DISABLE_WERROR is not set +CONFIG_PPC_WERROR=y CONFIG_PRINT_STACK_DEPTH=64 # CONFIG_DEBUG_STACKOVERFLOW is not set # CONFIG_DEBUG_STACK_USAGE is not set diff --git a/arch/powerpc/configs/85xx/tqm8555_defconfig b/arch/powerpc/configs/85xx/tqm8555_defconfig index 170360934ce..9196724bebc 100644 --- a/arch/powerpc/configs/85xx/tqm8555_defconfig +++ b/arch/powerpc/configs/85xx/tqm8555_defconfig @@ -1,14 +1,14 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.30-rc3 -# Wed May 13 17:22:25 2009 +# Linux kernel version: 2.6.31-rc4 +# Wed Jul 29 23:32:24 2009 # # CONFIG_PPC64 is not set # # Processor support # -# CONFIG_6xx is not set +# CONFIG_PPC_BOOK3S_32 is not set CONFIG_PPC_85xx=y # CONFIG_PPC_8xx is not set # CONFIG_40x is not set @@ -34,15 +34,16 @@ CONFIG_GENERIC_TIME=y CONFIG_GENERIC_TIME_VSYSCALL=y CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_GENERIC_HARDIRQS=y +CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set CONFIG_IRQ_PER_CPU=y CONFIG_STACKTRACE_SUPPORT=y CONFIG_HAVE_LATENCYTOP_SUPPORT=y +CONFIG_TRACE_IRQFLAGS_SUPPORT=y CONFIG_LOCKDEP_SUPPORT=y CONFIG_RWSEM_XCHGADD_ALGORITHM=y CONFIG_ARCH_HAS_ILOG2_U32=y CONFIG_GENERIC_HWEIGHT=y -CONFIG_GENERIC_CALIBRATE_DELAY=y CONFIG_GENERIC_FIND_NEXT_BIT=y CONFIG_GENERIC_GPIO=y # CONFIG_ARCH_NO_VIRT_TO_BUS is not set @@ -57,11 +58,13 @@ CONFIG_PPC_UDBG_16550=y # CONFIG_GENERIC_TBSYNC is not set CONFIG_AUDIT_ARCH=y CONFIG_GENERIC_BUG=y +CONFIG_DTC=y CONFIG_DEFAULT_UIMAGE=y # CONFIG_PPC_DCR_NATIVE is not set # CONFIG_PPC_DCR_MMIO is not set CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" +CONFIG_CONSTRUCTORS=y # # General setup @@ -110,7 +113,6 @@ CONFIG_ANON_INODES=y CONFIG_EMBEDDED=y CONFIG_SYSCTL_SYSCALL=y # CONFIG_KALLSYMS is not set -# CONFIG_STRIP_ASM_SYMS is not set # CONFIG_HOTPLUG is not set CONFIG_PRINTK=y CONFIG_BUG=y @@ -123,9 +125,16 @@ CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y CONFIG_AIO=y +CONFIG_HAVE_PERF_COUNTERS=y + +# +# Performance Counters +# +# CONFIG_PERF_COUNTERS is not set CONFIG_VM_EVENT_COUNTERS=y CONFIG_PCI_QUIRKS=y CONFIG_SLUB_DEBUG=y +# CONFIG_STRIP_ASM_SYMS is not set CONFIG_COMPAT_BRK=y # CONFIG_SLAB is not set CONFIG_SLUB=y @@ -139,6 +148,10 @@ CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_ARCH_TRACEHOOK=y CONFIG_HAVE_CLK=y + +# +# GCOV-based kernel profiling +# # CONFIG_SLOW_WORK is not set # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y @@ -146,7 +159,7 @@ CONFIG_RT_MUTEXES=y CONFIG_BASE_SMALL=0 # CONFIG_MODULES is not set CONFIG_BLOCK=y -# CONFIG_LBD is not set +CONFIG_LBDAF=y # CONFIG_BLK_DEV_BSG is not set # CONFIG_BLK_DEV_INTEGRITY is not set @@ -179,6 +192,7 @@ CONFIG_MPC85xx=y # CONFIG_MPC85xx_DS is not set # CONFIG_SOCRATES is not set # CONFIG_KSI8560 is not set +# CONFIG_XES_MPC85xx is not set # CONFIG_STX_GP3 is not set # CONFIG_TQM8540 is not set # CONFIG_TQM8541 is not set @@ -228,6 +242,7 @@ CONFIG_BINFMT_ELF=y # CONFIG_BINFMT_MISC is not set CONFIG_MATH_EMULATION=y # CONFIG_IOMMU_HELPER is not set +# CONFIG_SWIOTLB is not set CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y CONFIG_ARCH_HAS_WALK_MEMORY=y CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y @@ -246,9 +261,9 @@ CONFIG_MIGRATION=y CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y -CONFIG_UNEVICTABLE_LRU=y CONFIG_HAVE_MLOCK=y CONFIG_HAVE_MLOCKED_PAGE_BIT=y +CONFIG_DEFAULT_MMAP_MIN_ADDR=4096 CONFIG_PPC_4K_PAGES=y # CONFIG_PPC_16K_PAGES is not set # CONFIG_PPC_64K_PAGES is not set @@ -356,6 +371,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set # CONFIG_PHONET is not set +# CONFIG_IEEE802154 is not set # CONFIG_NET_SCHED is not set # CONFIG_DCB is not set @@ -373,7 +389,11 @@ CONFIG_WIRELESS=y CONFIG_WIRELESS_OLD_REGULATORY=y # CONFIG_WIRELESS_EXT is not set # CONFIG_LIB80211 is not set -# CONFIG_MAC80211 is not set + +# +# CFG80211 needs to be enabled for MAC80211 +# +CONFIG_MAC80211_DEFAULT_PS_VALUE=0 # CONFIG_WIMAX is not set # CONFIG_RFKILL is not set # CONFIG_NET_9P is not set @@ -475,6 +495,7 @@ CONFIG_MTD_CFI_UTIL=y CONFIG_OF_DEVICE=y CONFIG_OF_GPIO=y CONFIG_OF_I2C=y +CONFIG_OF_MDIO=y # CONFIG_PARPORT is not set CONFIG_BLK_DEV=y # CONFIG_BLK_DEV_FD is not set @@ -509,7 +530,9 @@ CONFIG_MISC_DEVICES=y # # CONFIG_EEPROM_AT24 is not set # CONFIG_EEPROM_LEGACY is not set +# CONFIG_EEPROM_MAX6875 is not set # CONFIG_EEPROM_93CX6 is not set +# CONFIG_CB710_CORE is not set CONFIG_HAVE_IDE=y CONFIG_IDE=y @@ -584,14 +607,17 @@ CONFIG_BLK_DEV_IDEDMA=y # # -# Enable only one of the two stacks, unless you know what you are doing +# You can enable one or both FireWire driver stacks. +# + +# +# See the help texts for more information. # # CONFIG_FIREWIRE is not set # CONFIG_IEEE1394 is not set # CONFIG_I2O is not set # CONFIG_MACINTOSH_DRIVERS is not set CONFIG_NETDEVICES=y -CONFIG_COMPAT_NET_DEV_OPS=y # CONFIG_DUMMY is not set # CONFIG_BONDING is not set # CONFIG_MACVLAN is not set @@ -654,6 +680,7 @@ CONFIG_E100=y # CONFIG_SMSC9420 is not set # CONFIG_SUNDANCE is not set # CONFIG_TLAN is not set +# CONFIG_KS8842 is not set # CONFIG_VIA_RHINE is not set # CONFIG_SC92031 is not set # CONFIG_ATL2 is not set @@ -676,8 +703,10 @@ CONFIG_NETDEV_1000=y # CONFIG_VIA_VELOCITY is not set # CONFIG_TIGON3 is not set # CONFIG_BNX2 is not set +# CONFIG_CNIC is not set CONFIG_FSL_PQ_MDIO=y CONFIG_GIANFAR=y +# CONFIG_MV643XX_ETH is not set # CONFIG_QLA3XXX is not set # CONFIG_ATL1 is not set # CONFIG_ATL1E is not set @@ -831,6 +860,7 @@ CONFIG_I2C_HELPER_AUTO=y # I2C system bus drivers (mostly embedded / system-on-chip) # # CONFIG_I2C_CPM is not set +# CONFIG_I2C_DESIGNWARE is not set # CONFIG_I2C_GPIO is not set CONFIG_I2C_MPC=y # CONFIG_I2C_OCORES is not set @@ -859,13 +889,17 @@ CONFIG_I2C_MPC=y # CONFIG_SENSORS_PCF8574 is not set # CONFIG_PCF8575 is not set # CONFIG_SENSORS_PCA9539 is not set -# CONFIG_SENSORS_MAX6875 is not set # CONFIG_SENSORS_TSL2550 is not set # CONFIG_I2C_DEBUG_CORE is not set # CONFIG_I2C_DEBUG_ALGO is not set # CONFIG_I2C_DEBUG_BUS is not set # CONFIG_I2C_DEBUG_CHIP is not set # CONFIG_SPI is not set + +# +# PPS support +# +# CONFIG_PPS is not set CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y CONFIG_ARCH_REQUIRE_GPIOLIB=y CONFIG_GPIOLIB=y @@ -944,6 +978,7 @@ CONFIG_SENSORS_LM75=y # CONFIG_SENSORS_SMSC47B397 is not set # CONFIG_SENSORS_ADS7828 is not set # CONFIG_SENSORS_THMC50 is not set +# CONFIG_SENSORS_TMP401 is not set # CONFIG_SENSORS_VIA686A is not set # CONFIG_SENSORS_VT1211 is not set # CONFIG_SENSORS_VT8231 is not set @@ -979,23 +1014,9 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_MFD_WM8400 is not set # CONFIG_MFD_WM8350_I2C is not set # CONFIG_MFD_PCF50633 is not set +# CONFIG_AB3100_CORE is not set # CONFIG_REGULATOR is not set - -# -# Multimedia devices -# - -# -# Multimedia core support -# -# CONFIG_VIDEO_DEV is not set -# CONFIG_DVB_CORE is not set -# CONFIG_VIDEO_MEDIA is not set - -# -# Multimedia drivers -# -CONFIG_DAB=y +# CONFIG_MEDIA_SUPPORT is not set # # Graphics support @@ -1052,6 +1073,10 @@ CONFIG_USB_ARCH_HAS_EHCI=y # CONFIG_DMADEVICES is not set # CONFIG_AUXDISPLAY is not set # CONFIG_UIO is not set + +# +# TI VLYNQ +# # CONFIG_STAGING is not set # @@ -1071,10 +1096,12 @@ CONFIG_FS_MBCACHE=y # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set -CONFIG_FILE_LOCKING=y # CONFIG_XFS_FS is not set +# CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set # CONFIG_BTRFS_FS is not set +CONFIG_FILE_LOCKING=y +CONFIG_FSNOTIFY=y CONFIG_DNOTIFY=y CONFIG_INOTIFY=y CONFIG_INOTIFY_USER=y @@ -1201,6 +1228,7 @@ CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y CONFIG_HAVE_LMB=y CONFIG_NLATTR=y +CONFIG_GENERIC_ATOMIC64=y # # Kernel hacking @@ -1226,22 +1254,11 @@ CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y CONFIG_HAVE_DYNAMIC_FTRACE=y CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y CONFIG_TRACING_SUPPORT=y - -# -# Tracers -# -# CONFIG_FUNCTION_TRACER is not set -# CONFIG_SCHED_TRACER is not set -# CONFIG_CONTEXT_SWITCH_TRACER is not set -# CONFIG_EVENT_TRACER is not set -# CONFIG_BOOT_TRACER is not set -# CONFIG_TRACE_BRANCH_PROFILING is not set -# CONFIG_STACK_TRACER is not set -# CONFIG_KMEMTRACE is not set -# CONFIG_WORKQUEUE_TRACER is not set -# CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_FTRACE is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y +# CONFIG_PPC_DISABLE_WERROR is not set +CONFIG_PPC_WERROR=y CONFIG_PRINT_STACK_DEPTH=64 # CONFIG_IRQSTACKS is not set # CONFIG_PPC_EARLY_DEBUG is not set diff --git a/arch/powerpc/configs/85xx/tqm8560_defconfig b/arch/powerpc/configs/85xx/tqm8560_defconfig index f41cc2444d4..2e49a6e9faf 100644 --- a/arch/powerpc/configs/85xx/tqm8560_defconfig +++ b/arch/powerpc/configs/85xx/tqm8560_defconfig @@ -1,14 +1,14 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.30-rc3 -# Wed May 13 17:22:26 2009 +# Linux kernel version: 2.6.31-rc4 +# Wed Jul 29 23:32:25 2009 # # CONFIG_PPC64 is not set # # Processor support # -# CONFIG_6xx is not set +# CONFIG_PPC_BOOK3S_32 is not set CONFIG_PPC_85xx=y # CONFIG_PPC_8xx is not set # CONFIG_40x is not set @@ -34,15 +34,16 @@ CONFIG_GENERIC_TIME=y CONFIG_GENERIC_TIME_VSYSCALL=y CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_GENERIC_HARDIRQS=y +CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set CONFIG_IRQ_PER_CPU=y CONFIG_STACKTRACE_SUPPORT=y CONFIG_HAVE_LATENCYTOP_SUPPORT=y +CONFIG_TRACE_IRQFLAGS_SUPPORT=y CONFIG_LOCKDEP_SUPPORT=y CONFIG_RWSEM_XCHGADD_ALGORITHM=y CONFIG_ARCH_HAS_ILOG2_U32=y CONFIG_GENERIC_HWEIGHT=y -CONFIG_GENERIC_CALIBRATE_DELAY=y CONFIG_GENERIC_FIND_NEXT_BIT=y CONFIG_GENERIC_GPIO=y # CONFIG_ARCH_NO_VIRT_TO_BUS is not set @@ -57,11 +58,13 @@ CONFIG_PPC_UDBG_16550=y # CONFIG_GENERIC_TBSYNC is not set CONFIG_AUDIT_ARCH=y CONFIG_GENERIC_BUG=y +CONFIG_DTC=y CONFIG_DEFAULT_UIMAGE=y # CONFIG_PPC_DCR_NATIVE is not set # CONFIG_PPC_DCR_MMIO is not set CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" +CONFIG_CONSTRUCTORS=y # # General setup @@ -110,7 +113,6 @@ CONFIG_ANON_INODES=y CONFIG_EMBEDDED=y CONFIG_SYSCTL_SYSCALL=y # CONFIG_KALLSYMS is not set -# CONFIG_STRIP_ASM_SYMS is not set # CONFIG_HOTPLUG is not set CONFIG_PRINTK=y CONFIG_BUG=y @@ -123,9 +125,16 @@ CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y CONFIG_AIO=y +CONFIG_HAVE_PERF_COUNTERS=y + +# +# Performance Counters +# +# CONFIG_PERF_COUNTERS is not set CONFIG_VM_EVENT_COUNTERS=y CONFIG_PCI_QUIRKS=y CONFIG_SLUB_DEBUG=y +# CONFIG_STRIP_ASM_SYMS is not set CONFIG_COMPAT_BRK=y # CONFIG_SLAB is not set CONFIG_SLUB=y @@ -139,6 +148,10 @@ CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_ARCH_TRACEHOOK=y CONFIG_HAVE_CLK=y + +# +# GCOV-based kernel profiling +# # CONFIG_SLOW_WORK is not set # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y @@ -146,7 +159,7 @@ CONFIG_RT_MUTEXES=y CONFIG_BASE_SMALL=0 # CONFIG_MODULES is not set CONFIG_BLOCK=y -# CONFIG_LBD is not set +CONFIG_LBDAF=y # CONFIG_BLK_DEV_BSG is not set # CONFIG_BLK_DEV_INTEGRITY is not set @@ -179,6 +192,7 @@ CONFIG_MPC85xx=y # CONFIG_MPC85xx_DS is not set # CONFIG_SOCRATES is not set # CONFIG_KSI8560 is not set +# CONFIG_XES_MPC85xx is not set # CONFIG_STX_GP3 is not set # CONFIG_TQM8540 is not set # CONFIG_TQM8541 is not set @@ -228,6 +242,7 @@ CONFIG_BINFMT_ELF=y # CONFIG_BINFMT_MISC is not set CONFIG_MATH_EMULATION=y # CONFIG_IOMMU_HELPER is not set +# CONFIG_SWIOTLB is not set CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y CONFIG_ARCH_HAS_WALK_MEMORY=y CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y @@ -246,9 +261,9 @@ CONFIG_MIGRATION=y CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y -CONFIG_UNEVICTABLE_LRU=y CONFIG_HAVE_MLOCK=y CONFIG_HAVE_MLOCKED_PAGE_BIT=y +CONFIG_DEFAULT_MMAP_MIN_ADDR=4096 CONFIG_PPC_4K_PAGES=y # CONFIG_PPC_16K_PAGES is not set # CONFIG_PPC_64K_PAGES is not set @@ -356,6 +371,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set # CONFIG_PHONET is not set +# CONFIG_IEEE802154 is not set # CONFIG_NET_SCHED is not set # CONFIG_DCB is not set @@ -373,7 +389,11 @@ CONFIG_WIRELESS=y CONFIG_WIRELESS_OLD_REGULATORY=y # CONFIG_WIRELESS_EXT is not set # CONFIG_LIB80211 is not set -# CONFIG_MAC80211 is not set + +# +# CFG80211 needs to be enabled for MAC80211 +# +CONFIG_MAC80211_DEFAULT_PS_VALUE=0 # CONFIG_WIMAX is not set # CONFIG_RFKILL is not set # CONFIG_NET_9P is not set @@ -475,6 +495,7 @@ CONFIG_MTD_CFI_UTIL=y CONFIG_OF_DEVICE=y CONFIG_OF_GPIO=y CONFIG_OF_I2C=y +CONFIG_OF_MDIO=y # CONFIG_PARPORT is not set CONFIG_BLK_DEV=y # CONFIG_BLK_DEV_FD is not set @@ -509,7 +530,9 @@ CONFIG_MISC_DEVICES=y # # CONFIG_EEPROM_AT24 is not set # CONFIG_EEPROM_LEGACY is not set +# CONFIG_EEPROM_MAX6875 is not set # CONFIG_EEPROM_93CX6 is not set +# CONFIG_CB710_CORE is not set CONFIG_HAVE_IDE=y CONFIG_IDE=y @@ -584,14 +607,17 @@ CONFIG_BLK_DEV_IDEDMA=y # # -# Enable only one of the two stacks, unless you know what you are doing +# You can enable one or both FireWire driver stacks. +# + +# +# See the help texts for more information. # # CONFIG_FIREWIRE is not set # CONFIG_IEEE1394 is not set # CONFIG_I2O is not set # CONFIG_MACINTOSH_DRIVERS is not set CONFIG_NETDEVICES=y -CONFIG_COMPAT_NET_DEV_OPS=y # CONFIG_DUMMY is not set # CONFIG_BONDING is not set # CONFIG_MACVLAN is not set @@ -654,6 +680,7 @@ CONFIG_E100=y # CONFIG_SMSC9420 is not set # CONFIG_SUNDANCE is not set # CONFIG_TLAN is not set +# CONFIG_KS8842 is not set # CONFIG_VIA_RHINE is not set # CONFIG_SC92031 is not set # CONFIG_ATL2 is not set @@ -676,8 +703,10 @@ CONFIG_NETDEV_1000=y # CONFIG_VIA_VELOCITY is not set # CONFIG_TIGON3 is not set # CONFIG_BNX2 is not set +# CONFIG_CNIC is not set CONFIG_FSL_PQ_MDIO=y CONFIG_GIANFAR=y +# CONFIG_MV643XX_ETH is not set # CONFIG_QLA3XXX is not set # CONFIG_ATL1 is not set # CONFIG_ATL1E is not set @@ -831,6 +860,7 @@ CONFIG_I2C_HELPER_AUTO=y # I2C system bus drivers (mostly embedded / system-on-chip) # # CONFIG_I2C_CPM is not set +# CONFIG_I2C_DESIGNWARE is not set # CONFIG_I2C_GPIO is not set CONFIG_I2C_MPC=y # CONFIG_I2C_OCORES is not set @@ -859,13 +889,17 @@ CONFIG_I2C_MPC=y # CONFIG_SENSORS_PCF8574 is not set # CONFIG_PCF8575 is not set # CONFIG_SENSORS_PCA9539 is not set -# CONFIG_SENSORS_MAX6875 is not set # CONFIG_SENSORS_TSL2550 is not set # CONFIG_I2C_DEBUG_CORE is not set # CONFIG_I2C_DEBUG_ALGO is not set # CONFIG_I2C_DEBUG_BUS is not set # CONFIG_I2C_DEBUG_CHIP is not set # CONFIG_SPI is not set + +# +# PPS support +# +# CONFIG_PPS is not set CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y CONFIG_ARCH_REQUIRE_GPIOLIB=y CONFIG_GPIOLIB=y @@ -944,6 +978,7 @@ CONFIG_SENSORS_LM75=y # CONFIG_SENSORS_SMSC47B397 is not set # CONFIG_SENSORS_ADS7828 is not set # CONFIG_SENSORS_THMC50 is not set +# CONFIG_SENSORS_TMP401 is not set # CONFIG_SENSORS_VIA686A is not set # CONFIG_SENSORS_VT1211 is not set # CONFIG_SENSORS_VT8231 is not set @@ -979,23 +1014,9 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_MFD_WM8400 is not set # CONFIG_MFD_WM8350_I2C is not set # CONFIG_MFD_PCF50633 is not set +# CONFIG_AB3100_CORE is not set # CONFIG_REGULATOR is not set - -# -# Multimedia devices -# - -# -# Multimedia core support -# -# CONFIG_VIDEO_DEV is not set -# CONFIG_DVB_CORE is not set -# CONFIG_VIDEO_MEDIA is not set - -# -# Multimedia drivers -# -CONFIG_DAB=y +# CONFIG_MEDIA_SUPPORT is not set # # Graphics support @@ -1052,6 +1073,10 @@ CONFIG_USB_ARCH_HAS_EHCI=y # CONFIG_DMADEVICES is not set # CONFIG_AUXDISPLAY is not set # CONFIG_UIO is not set + +# +# TI VLYNQ +# # CONFIG_STAGING is not set # @@ -1071,10 +1096,12 @@ CONFIG_FS_MBCACHE=y # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set -CONFIG_FILE_LOCKING=y # CONFIG_XFS_FS is not set +# CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set # CONFIG_BTRFS_FS is not set +CONFIG_FILE_LOCKING=y +CONFIG_FSNOTIFY=y CONFIG_DNOTIFY=y CONFIG_INOTIFY=y CONFIG_INOTIFY_USER=y @@ -1201,6 +1228,7 @@ CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y CONFIG_HAVE_LMB=y CONFIG_NLATTR=y +CONFIG_GENERIC_ATOMIC64=y # # Kernel hacking @@ -1226,22 +1254,11 @@ CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y CONFIG_HAVE_DYNAMIC_FTRACE=y CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y CONFIG_TRACING_SUPPORT=y - -# -# Tracers -# -# CONFIG_FUNCTION_TRACER is not set -# CONFIG_SCHED_TRACER is not set -# CONFIG_CONTEXT_SWITCH_TRACER is not set -# CONFIG_EVENT_TRACER is not set -# CONFIG_BOOT_TRACER is not set -# CONFIG_TRACE_BRANCH_PROFILING is not set -# CONFIG_STACK_TRACER is not set -# CONFIG_KMEMTRACE is not set -# CONFIG_WORKQUEUE_TRACER is not set -# CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_FTRACE is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y +# CONFIG_PPC_DISABLE_WERROR is not set +CONFIG_PPC_WERROR=y CONFIG_PRINT_STACK_DEPTH=64 # CONFIG_IRQSTACKS is not set # CONFIG_PPC_EARLY_DEBUG is not set diff --git a/arch/powerpc/configs/85xx/xes_mpc85xx_defconfig b/arch/powerpc/configs/85xx/xes_mpc85xx_defconfig index 2552cbefba6..1025da2bf06 100644 --- a/arch/powerpc/configs/85xx/xes_mpc85xx_defconfig +++ b/arch/powerpc/configs/85xx/xes_mpc85xx_defconfig @@ -1,14 +1,14 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.30-rc6 -# Thu Jun 11 11:25:17 2009 +# Linux kernel version: 2.6.31-rc4 +# Wed Jul 29 23:32:25 2009 # # CONFIG_PPC64 is not set # # Processor support # -# CONFIG_6xx is not set +# CONFIG_PPC_BOOK3S_32 is not set CONFIG_PPC_85xx=y # CONFIG_PPC_8xx is not set # CONFIG_40x is not set @@ -35,15 +35,16 @@ CONFIG_GENERIC_TIME=y CONFIG_GENERIC_TIME_VSYSCALL=y CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_GENERIC_HARDIRQS=y +CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set CONFIG_IRQ_PER_CPU=y CONFIG_STACKTRACE_SUPPORT=y CONFIG_HAVE_LATENCYTOP_SUPPORT=y +CONFIG_TRACE_IRQFLAGS_SUPPORT=y CONFIG_LOCKDEP_SUPPORT=y CONFIG_RWSEM_XCHGADD_ALGORITHM=y CONFIG_ARCH_HAS_ILOG2_U32=y CONFIG_GENERIC_HWEIGHT=y -CONFIG_GENERIC_CALIBRATE_DELAY=y CONFIG_GENERIC_FIND_NEXT_BIT=y CONFIG_GENERIC_GPIO=y # CONFIG_ARCH_NO_VIRT_TO_BUS is not set @@ -64,6 +65,7 @@ CONFIG_DEFAULT_UIMAGE=y # CONFIG_PPC_DCR_MMIO is not set CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" +CONFIG_CONSTRUCTORS=y # # General setup @@ -114,7 +116,6 @@ CONFIG_SYSCTL_SYSCALL=y CONFIG_KALLSYMS=y CONFIG_KALLSYMS_ALL=y CONFIG_KALLSYMS_EXTRA_PASS=y -# CONFIG_STRIP_ASM_SYMS is not set CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y @@ -127,9 +128,16 @@ CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y CONFIG_AIO=y +CONFIG_HAVE_PERF_COUNTERS=y + +# +# Performance Counters +# +# CONFIG_PERF_COUNTERS is not set CONFIG_VM_EVENT_COUNTERS=y CONFIG_PCI_QUIRKS=y CONFIG_SLUB_DEBUG=y +# CONFIG_STRIP_ASM_SYMS is not set CONFIG_COMPAT_BRK=y # CONFIG_SLAB is not set CONFIG_SLUB=y @@ -144,6 +152,10 @@ CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_ARCH_TRACEHOOK=y CONFIG_USE_GENERIC_SMP_HELPERS=y + +# +# GCOV-based kernel profiling +# # CONFIG_SLOW_WORK is not set # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y @@ -157,7 +169,7 @@ CONFIG_MODVERSIONS=y # CONFIG_MODULE_SRCVERSION_ALL is not set CONFIG_STOP_MACHINE=y CONFIG_BLOCK=y -CONFIG_LBD=y +CONFIG_LBDAF=y # CONFIG_BLK_DEV_BSG is not set # CONFIG_BLK_DEV_INTEGRITY is not set @@ -239,6 +251,7 @@ CONFIG_BINFMT_ELF=y # CONFIG_BINFMT_MISC is not set CONFIG_MATH_EMULATION=y # CONFIG_IOMMU_HELPER is not set +# CONFIG_SWIOTLB is not set CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y CONFIG_ARCH_HAS_WALK_MEMORY=y CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y @@ -258,9 +271,9 @@ CONFIG_MIGRATION=y CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y -CONFIG_UNEVICTABLE_LRU=y CONFIG_HAVE_MLOCK=y CONFIG_HAVE_MLOCKED_PAGE_BIT=y +CONFIG_DEFAULT_MMAP_MIN_ADDR=4096 CONFIG_PPC_4K_PAGES=y # CONFIG_PPC_16K_PAGES is not set # CONFIG_PPC_64K_PAGES is not set @@ -287,6 +300,8 @@ CONFIG_PCI_DOMAINS=y CONFIG_PCI_SYSCALL=y CONFIG_PCIEPORTBUS=y CONFIG_PCIEAER=y +# CONFIG_PCIE_ECRC is not set +# CONFIG_PCIEAER_INJECT is not set # CONFIG_PCIEASPM is not set CONFIG_ARCH_SUPPORTS_MSI=y CONFIG_PCI_MSI=y @@ -404,6 +419,7 @@ CONFIG_IPV6_NDISC_NODETYPE=y # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set # CONFIG_PHONET is not set +# CONFIG_IEEE802154 is not set # CONFIG_NET_SCHED is not set # CONFIG_DCB is not set @@ -540,6 +556,7 @@ CONFIG_MTD_NAND_FSL_UPM=y CONFIG_OF_DEVICE=y CONFIG_OF_GPIO=y CONFIG_OF_I2C=y +CONFIG_OF_MDIO=y # CONFIG_PARPORT is not set CONFIG_BLK_DEV=y # CONFIG_BLK_DEV_FD is not set @@ -575,7 +592,9 @@ CONFIG_MISC_DEVICES=y # # CONFIG_EEPROM_AT24 is not set # CONFIG_EEPROM_LEGACY is not set +# CONFIG_EEPROM_MAX6875 is not set # CONFIG_EEPROM_93CX6 is not set +# CONFIG_CB710_CORE is not set CONFIG_HAVE_IDE=y # CONFIG_IDE is not set @@ -599,10 +618,6 @@ CONFIG_BLK_DEV_SR=y # CONFIG_BLK_DEV_SR_VENDOR is not set CONFIG_CHR_DEV_SG=y # CONFIG_CHR_DEV_SCH is not set - -# -# Some SCSI devices (e.g. CD jukebox) support multiple LUNs -# CONFIG_SCSI_MULTI_LUN=y # CONFIG_SCSI_CONSTANTS is not set CONFIG_SCSI_LOGGING=y @@ -619,6 +634,7 @@ CONFIG_SCSI_WAIT_SCAN=m # CONFIG_SCSI_SRP_ATTRS is not set CONFIG_SCSI_LOWLEVEL=y # CONFIG_ISCSI_TCP is not set +# CONFIG_SCSI_BNX2_ISCSI is not set # CONFIG_BLK_DEV_3W_XXXX_RAID is not set # CONFIG_SCSI_3W_9XXX is not set # CONFIG_SCSI_ACARD is not set @@ -627,6 +643,7 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_SCSI_AIC7XXX_OLD is not set # CONFIG_SCSI_AIC79XX is not set # CONFIG_SCSI_AIC94XX is not set +# CONFIG_SCSI_MVSAS is not set # CONFIG_SCSI_DPT_I2O is not set # CONFIG_SCSI_ADVANSYS is not set # CONFIG_SCSI_ARCMSR is not set @@ -646,7 +663,6 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_SCSI_IPS is not set # CONFIG_SCSI_INITIO is not set # CONFIG_SCSI_INIA100 is not set -# CONFIG_SCSI_MVSAS is not set # CONFIG_SCSI_STEX is not set # CONFIG_SCSI_SYM53C8XX_2 is not set # CONFIG_SCSI_IPR is not set @@ -730,14 +746,17 @@ CONFIG_PATA_ALI=y # # -# Enable only one of the two stacks, unless you know what you are doing +# You can enable one or both FireWire driver stacks. +# + +# +# See the help texts for more information. # # CONFIG_FIREWIRE is not set # CONFIG_IEEE1394 is not set # CONFIG_I2O is not set # CONFIG_MACINTOSH_DRIVERS is not set CONFIG_NETDEVICES=y -CONFIG_COMPAT_NET_DEV_OPS=y CONFIG_DUMMY=y # CONFIG_BONDING is not set # CONFIG_MACVLAN is not set @@ -784,6 +803,7 @@ CONFIG_MII=y # CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set # CONFIG_NET_PCI is not set # CONFIG_B44 is not set +# CONFIG_KS8842 is not set # CONFIG_ATL2 is not set CONFIG_NETDEV_1000=y # CONFIG_ACENIC is not set @@ -803,8 +823,10 @@ CONFIG_E1000=y # CONFIG_VIA_VELOCITY is not set # CONFIG_TIGON3 is not set # CONFIG_BNX2 is not set +# CONFIG_CNIC is not set CONFIG_FSL_PQ_MDIO=y CONFIG_GIANFAR=y +# CONFIG_MV643XX_ETH is not set # CONFIG_QLA3XXX is not set # CONFIG_ATL1 is not set # CONFIG_ATL1E is not set @@ -986,13 +1008,17 @@ CONFIG_I2C_MPC=y # CONFIG_DS1682 is not set # CONFIG_SENSORS_PCF8574 is not set # CONFIG_PCF8575 is not set -# CONFIG_SENSORS_MAX6875 is not set # CONFIG_SENSORS_TSL2550 is not set # CONFIG_I2C_DEBUG_CORE is not set # CONFIG_I2C_DEBUG_ALGO is not set # CONFIG_I2C_DEBUG_BUS is not set # CONFIG_I2C_DEBUG_CHIP is not set # CONFIG_SPI is not set + +# +# PPS support +# +# CONFIG_PPS is not set CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y CONFIG_ARCH_REQUIRE_GPIOLIB=y CONFIG_GPIOLIB=y @@ -1072,6 +1098,7 @@ CONFIG_SENSORS_LM90=y # CONFIG_SENSORS_SMSC47B397 is not set # CONFIG_SENSORS_ADS7828 is not set # CONFIG_SENSORS_THMC50 is not set +# CONFIG_SENSORS_TMP401 is not set # CONFIG_SENSORS_VIA686A is not set # CONFIG_SENSORS_VT1211 is not set # CONFIG_SENSORS_VT8231 is not set @@ -1126,23 +1153,9 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_MFD_WM8400 is not set # CONFIG_MFD_WM8350_I2C is not set # CONFIG_MFD_PCF50633 is not set +# CONFIG_AB3100_CORE is not set # CONFIG_REGULATOR is not set - -# -# Multimedia devices -# - -# -# Multimedia core support -# -# CONFIG_VIDEO_DEV is not set -# CONFIG_DVB_CORE is not set -# CONFIG_VIDEO_MEDIA is not set - -# -# Multimedia drivers -# -# CONFIG_DAB is not set +# CONFIG_MEDIA_SUPPORT is not set # # Graphics support @@ -1187,7 +1200,7 @@ CONFIG_USB_HID=y # CONFIG_HID_CHERRY is not set # CONFIG_HID_CHICONY is not set # CONFIG_HID_CYPRESS is not set -# CONFIG_DRAGONRISE_FF is not set +# CONFIG_HID_DRAGONRISE is not set # CONFIG_HID_EZKEY is not set # CONFIG_HID_KYE is not set # CONFIG_HID_GYRATION is not set @@ -1201,10 +1214,11 @@ CONFIG_USB_HID=y # CONFIG_HID_SAMSUNG is not set # CONFIG_HID_SONY is not set # CONFIG_HID_SUNPLUS is not set -# CONFIG_GREENASIA_FF is not set +# CONFIG_HID_GREENASIA is not set +# CONFIG_HID_SMARTJOYPLUS is not set # CONFIG_HID_TOPSEED is not set -# CONFIG_THRUSTMASTER_FF is not set -# CONFIG_ZEROPLUS_FF is not set +# CONFIG_HID_THRUSTMASTER is not set +# CONFIG_HID_ZEROPLUS is not set CONFIG_USB_SUPPORT=y CONFIG_USB_ARCH_HAS_HCD=y CONFIG_USB_ARCH_HAS_OHCI=y @@ -1230,6 +1244,7 @@ CONFIG_USB_MON=y # USB Host Controller Drivers # # CONFIG_USB_C67X00_HCD is not set +# CONFIG_USB_XHCI_HCD is not set # CONFIG_USB_EHCI_HCD is not set # CONFIG_USB_OXU210HP_HCD is not set # CONFIG_USB_ISP116X_HCD is not set @@ -1325,7 +1340,7 @@ CONFIG_LEDS_CLASS=y CONFIG_LEDS_GPIO=y CONFIG_LEDS_GPIO_PLATFORM=y CONFIG_LEDS_GPIO_OF=y -# CONFIG_LEDS_LP5521 is not set +# CONFIG_LEDS_LP3944 is not set CONFIG_LEDS_PCA955X=y # CONFIG_LEDS_BD2802 is not set @@ -1352,8 +1367,6 @@ CONFIG_EDAC=y # CONFIG_EDAC_DEBUG is not set CONFIG_EDAC_MM_EDAC=y CONFIG_EDAC_MPC85XX=y -# CONFIG_EDAC_AMD8131 is not set -# CONFIG_EDAC_AMD8111 is not set CONFIG_RTC_LIB=y CONFIG_RTC_CLASS=y CONFIG_RTC_HCTOSYS=y @@ -1385,6 +1398,7 @@ CONFIG_RTC_DRV_DS1307=y # CONFIG_RTC_DRV_S35390A is not set # CONFIG_RTC_DRV_FM3130 is not set # CONFIG_RTC_DRV_RX8581 is not set +# CONFIG_RTC_DRV_RX8025 is not set # # SPI RTC drivers @@ -1425,6 +1439,10 @@ CONFIG_NET_DMA=y # CONFIG_DMATEST is not set # CONFIG_AUXDISPLAY is not set # CONFIG_UIO is not set + +# +# TI VLYNQ +# # CONFIG_STAGING is not set # @@ -1444,11 +1462,12 @@ CONFIG_FS_MBCACHE=y # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set -CONFIG_FILE_LOCKING=y # CONFIG_XFS_FS is not set # CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set # CONFIG_BTRFS_FS is not set +CONFIG_FILE_LOCKING=y +CONFIG_FSNOTIFY=y CONFIG_DNOTIFY=y CONFIG_INOTIFY=y CONFIG_INOTIFY_USER=y @@ -1629,6 +1648,7 @@ CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y CONFIG_HAVE_LMB=y CONFIG_NLATTR=y +CONFIG_GENERIC_ATOMIC64=y # # Kernel hacking @@ -1659,6 +1679,9 @@ CONFIG_SCHED_DEBUG=y # CONFIG_RT_MUTEX_TESTER is not set # CONFIG_DEBUG_SPINLOCK is not set # CONFIG_DEBUG_MUTEXES is not set +# CONFIG_DEBUG_LOCK_ALLOC is not set +# CONFIG_PROVE_LOCKING is not set +# CONFIG_LOCK_STAT is not set # CONFIG_DEBUG_SPINLOCK_SLEEP is not set # CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set # CONFIG_DEBUG_KOBJECT is not set @@ -1671,7 +1694,6 @@ CONFIG_SCHED_DEBUG=y # CONFIG_DEBUG_LIST is not set # CONFIG_DEBUG_SG is not set # CONFIG_DEBUG_NOTIFIERS is not set -# CONFIG_BOOT_PRINTK_DELAY is not set # CONFIG_RCU_TORTURE_TEST is not set # CONFIG_RCU_CPU_STALL_DETECTOR is not set # CONFIG_BACKTRACE_SELF_TEST is not set @@ -1685,16 +1707,15 @@ CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y CONFIG_HAVE_DYNAMIC_FTRACE=y CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y CONFIG_TRACING_SUPPORT=y - -# -# Tracers -# +CONFIG_FTRACE=y # CONFIG_FUNCTION_TRACER is not set +# CONFIG_IRQSOFF_TRACER is not set # CONFIG_SCHED_TRACER is not set -# CONFIG_CONTEXT_SWITCH_TRACER is not set -# CONFIG_EVENT_TRACER is not set +# CONFIG_ENABLE_DEFAULT_TRACERS is not set # CONFIG_BOOT_TRACER is not set -# CONFIG_TRACE_BRANCH_PROFILING is not set +CONFIG_BRANCH_PROFILE_NONE=y +# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set +# CONFIG_PROFILE_ALL_BRANCHES is not set # CONFIG_STACK_TRACER is not set # CONFIG_KMEMTRACE is not set # CONFIG_WORKQUEUE_TRACER is not set @@ -1702,6 +1723,9 @@ CONFIG_TRACING_SUPPORT=y # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y # CONFIG_KGDB is not set +# CONFIG_KMEMCHECK is not set +# CONFIG_PPC_DISABLE_WERROR is not set +CONFIG_PPC_WERROR=y CONFIG_PRINT_STACK_DEPTH=64 # CONFIG_DEBUG_STACKOVERFLOW is not set # CONFIG_DEBUG_STACK_USAGE is not set diff --git a/arch/powerpc/configs/86xx/gef_ppc9a_defconfig b/arch/powerpc/configs/86xx/gef_ppc9a_defconfig index d8354d993b2..527ad1a5e80 100644 --- a/arch/powerpc/configs/86xx/gef_ppc9a_defconfig +++ b/arch/powerpc/configs/86xx/gef_ppc9a_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.30 -# Thu Jul 2 13:55:24 2009 +# Linux kernel version: 2.6.31-rc4 +# Wed Jul 29 23:32:31 2009 # # CONFIG_PPC64 is not set @@ -39,6 +39,7 @@ CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y CONFIG_IRQ_PER_CPU=y CONFIG_STACKTRACE_SUPPORT=y CONFIG_HAVE_LATENCYTOP_SUPPORT=y +CONFIG_TRACE_IRQFLAGS_SUPPORT=y CONFIG_LOCKDEP_SUPPORT=y CONFIG_RWSEM_XCHGADD_ALGORITHM=y CONFIG_GENERIC_LOCKBREAK=y @@ -1322,6 +1323,8 @@ CONFIG_USB_EHCI_HCD=y # CONFIG_USB_ISP116X_HCD is not set # CONFIG_USB_ISP1760_HCD is not set CONFIG_USB_OHCI_HCD=y +# CONFIG_USB_OHCI_HCD_PPC_OF_BE is not set +# CONFIG_USB_OHCI_HCD_PPC_OF_LE is not set # CONFIG_USB_OHCI_HCD_PPC_OF is not set # CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set # CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set diff --git a/arch/powerpc/configs/86xx/gef_sbc310_defconfig b/arch/powerpc/configs/86xx/gef_sbc310_defconfig index f2362e5bf06..cd338d493be 100644 --- a/arch/powerpc/configs/86xx/gef_sbc310_defconfig +++ b/arch/powerpc/configs/86xx/gef_sbc310_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.30 -# Thu Jul 2 14:10:12 2009 +# Linux kernel version: 2.6.31-rc4 +# Wed Jul 29 23:32:29 2009 # # CONFIG_PPC64 is not set @@ -39,6 +39,7 @@ CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y CONFIG_IRQ_PER_CPU=y CONFIG_STACKTRACE_SUPPORT=y CONFIG_HAVE_LATENCYTOP_SUPPORT=y +CONFIG_TRACE_IRQFLAGS_SUPPORT=y CONFIG_LOCKDEP_SUPPORT=y CONFIG_RWSEM_XCHGADD_ALGORITHM=y CONFIG_GENERIC_LOCKBREAK=y @@ -1267,6 +1268,8 @@ CONFIG_USB_EHCI_HCD=y # CONFIG_USB_ISP116X_HCD is not set # CONFIG_USB_ISP1760_HCD is not set CONFIG_USB_OHCI_HCD=y +# CONFIG_USB_OHCI_HCD_PPC_OF_BE is not set +# CONFIG_USB_OHCI_HCD_PPC_OF_LE is not set # CONFIG_USB_OHCI_HCD_PPC_OF is not set # CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set # CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set diff --git a/arch/powerpc/configs/86xx/gef_sbc610_defconfig b/arch/powerpc/configs/86xx/gef_sbc610_defconfig index c6a7fc82b69..ba47883f4aa 100644 --- a/arch/powerpc/configs/86xx/gef_sbc610_defconfig +++ b/arch/powerpc/configs/86xx/gef_sbc610_defconfig @@ -1,26 +1,28 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.30-rc3 -# Wed May 13 17:22:30 2009 +# Linux kernel version: 2.6.31-rc4 +# Wed Jul 29 23:32:30 2009 # # CONFIG_PPC64 is not set # # Processor support # -CONFIG_6xx=y +CONFIG_PPC_BOOK3S_32=y # CONFIG_PPC_85xx is not set # CONFIG_PPC_8xx is not set # CONFIG_40x is not set # CONFIG_44x is not set # CONFIG_E200 is not set CONFIG_PPC_BOOK3S=y +CONFIG_6xx=y CONFIG_PPC_FPU=y # CONFIG_PHYS_64BIT is not set CONFIG_ALTIVEC=y CONFIG_PPC_STD_MMU=y CONFIG_PPC_STD_MMU_32=y # CONFIG_PPC_MM_SLICES is not set +CONFIG_PPC_HAVE_PMU_SUPPORT=y CONFIG_SMP=y CONFIG_NR_CPUS=2 CONFIG_PPC32=y @@ -32,16 +34,17 @@ CONFIG_GENERIC_TIME=y CONFIG_GENERIC_TIME_VSYSCALL=y CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_GENERIC_HARDIRQS=y +CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set CONFIG_IRQ_PER_CPU=y CONFIG_STACKTRACE_SUPPORT=y CONFIG_HAVE_LATENCYTOP_SUPPORT=y +CONFIG_TRACE_IRQFLAGS_SUPPORT=y CONFIG_LOCKDEP_SUPPORT=y CONFIG_RWSEM_XCHGADD_ALGORITHM=y CONFIG_GENERIC_LOCKBREAK=y CONFIG_ARCH_HAS_ILOG2_U32=y CONFIG_GENERIC_HWEIGHT=y -CONFIG_GENERIC_CALIBRATE_DELAY=y CONFIG_GENERIC_FIND_NEXT_BIT=y CONFIG_GENERIC_GPIO=y # CONFIG_ARCH_NO_VIRT_TO_BUS is not set @@ -56,11 +59,13 @@ CONFIG_PPC_UDBG_16550=y CONFIG_GENERIC_TBSYNC=y CONFIG_AUDIT_ARCH=y CONFIG_GENERIC_BUG=y +CONFIG_DTC=y CONFIG_DEFAULT_UIMAGE=y # CONFIG_PPC_DCR_NATIVE is not set # CONFIG_PPC_DCR_MMIO is not set CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" +CONFIG_CONSTRUCTORS=y # # General setup @@ -114,7 +119,6 @@ CONFIG_SYSCTL_SYSCALL=y CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_ALL is not set # CONFIG_KALLSYMS_EXTRA_PASS is not set -# CONFIG_STRIP_ASM_SYMS is not set CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y @@ -127,8 +131,15 @@ CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y CONFIG_AIO=y +CONFIG_HAVE_PERF_COUNTERS=y + +# +# Performance Counters +# +# CONFIG_PERF_COUNTERS is not set CONFIG_VM_EVENT_COUNTERS=y CONFIG_PCI_QUIRKS=y +# CONFIG_STRIP_ASM_SYMS is not set CONFIG_COMPAT_BRK=y CONFIG_SLAB=y # CONFIG_SLUB is not set @@ -143,6 +154,10 @@ CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_ARCH_TRACEHOOK=y CONFIG_USE_GENERIC_SMP_HELPERS=y + +# +# GCOV-based kernel profiling +# # CONFIG_SLOW_WORK is not set # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y @@ -156,7 +171,7 @@ CONFIG_MODULE_UNLOAD=y # CONFIG_MODULE_SRCVERSION_ALL is not set CONFIG_STOP_MACHINE=y CONFIG_BLOCK=y -# CONFIG_LBD is not set +CONFIG_LBDAF=y # CONFIG_BLK_DEV_BSG is not set # CONFIG_BLK_DEV_INTEGRITY is not set @@ -235,6 +250,7 @@ CONFIG_BINFMT_ELF=y # CONFIG_HAVE_AOUT is not set CONFIG_BINFMT_MISC=m # CONFIG_IOMMU_HELPER is not set +# CONFIG_SWIOTLB is not set CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y CONFIG_ARCH_HAS_WALK_MEMORY=y CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y @@ -256,9 +272,9 @@ CONFIG_MIGRATION=y CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y -CONFIG_UNEVICTABLE_LRU=y CONFIG_HAVE_MLOCK=y CONFIG_HAVE_MLOCKED_PAGE_BIT=y +CONFIG_DEFAULT_MMAP_MIN_ADDR=4096 CONFIG_PPC_4K_PAGES=y # CONFIG_PPC_16K_PAGES is not set # CONFIG_PPC_64K_PAGES is not set @@ -285,6 +301,8 @@ CONFIG_PCI_DOMAINS=y CONFIG_PCI_SYSCALL=y CONFIG_PCIEPORTBUS=y CONFIG_PCIEAER=y +# CONFIG_PCIE_ECRC is not set +# CONFIG_PCIEAER_INJECT is not set # CONFIG_PCIEASPM is not set CONFIG_ARCH_SUPPORTS_MSI=y # CONFIG_PCI_MSI is not set @@ -510,6 +528,7 @@ CONFIG_LLC=m # CONFIG_ECONET is not set CONFIG_WAN_ROUTER=m # CONFIG_PHONET is not set +# CONFIG_IEEE802154 is not set CONFIG_NET_SCHED=y # @@ -566,7 +585,11 @@ CONFIG_WIRELESS=y CONFIG_WIRELESS_OLD_REGULATORY=y # CONFIG_WIRELESS_EXT is not set # CONFIG_LIB80211 is not set -# CONFIG_MAC80211 is not set + +# +# CFG80211 needs to be enabled for MAC80211 +# +CONFIG_MAC80211_DEFAULT_PS_VALUE=0 # CONFIG_WIMAX is not set # CONFIG_RFKILL is not set # CONFIG_NET_9P is not set @@ -678,6 +701,7 @@ CONFIG_MTD_PHYSMAP_OF=y CONFIG_OF_DEVICE=y CONFIG_OF_GPIO=y CONFIG_OF_I2C=y +CONFIG_OF_MDIO=y # CONFIG_PARPORT is not set CONFIG_BLK_DEV=y # CONFIG_BLK_DEV_FD is not set @@ -713,7 +737,9 @@ CONFIG_MISC_DEVICES=y # # CONFIG_EEPROM_AT24 is not set # CONFIG_EEPROM_LEGACY is not set +# CONFIG_EEPROM_MAX6875 is not set # CONFIG_EEPROM_93CX6 is not set +# CONFIG_CB710_CORE is not set CONFIG_HAVE_IDE=y # CONFIG_IDE is not set @@ -737,10 +763,6 @@ CONFIG_BLK_DEV_SR=y # CONFIG_BLK_DEV_SR_VENDOR is not set # CONFIG_CHR_DEV_SG is not set # CONFIG_CHR_DEV_SCH is not set - -# -# Some SCSI devices (e.g. CD jukebox) support multiple LUNs -# # CONFIG_SCSI_MULTI_LUN is not set # CONFIG_SCSI_CONSTANTS is not set # CONFIG_SCSI_LOGGING is not set @@ -757,6 +779,7 @@ CONFIG_SCSI_WAIT_SCAN=m # CONFIG_SCSI_SRP_ATTRS is not set CONFIG_SCSI_LOWLEVEL=y # CONFIG_ISCSI_TCP is not set +# CONFIG_SCSI_BNX2_ISCSI is not set # CONFIG_BLK_DEV_3W_XXXX_RAID is not set # CONFIG_SCSI_3W_9XXX is not set # CONFIG_SCSI_ACARD is not set @@ -765,6 +788,7 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_SCSI_AIC7XXX_OLD is not set # CONFIG_SCSI_AIC79XX is not set # CONFIG_SCSI_AIC94XX is not set +# CONFIG_SCSI_MVSAS is not set # CONFIG_SCSI_DPT_I2O is not set # CONFIG_SCSI_ADVANSYS is not set # CONFIG_SCSI_ARCMSR is not set @@ -784,7 +808,6 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_SCSI_IPS is not set # CONFIG_SCSI_INITIO is not set # CONFIG_SCSI_INIA100 is not set -# CONFIG_SCSI_MVSAS is not set # CONFIG_SCSI_STEX is not set # CONFIG_SCSI_SYM53C8XX_2 is not set # CONFIG_SCSI_IPR is not set @@ -868,14 +891,17 @@ CONFIG_SATA_SIL=y # # -# Enable only one of the two stacks, unless you know what you are doing +# You can enable one or both FireWire driver stacks. +# + +# +# See the help texts for more information. # # CONFIG_FIREWIRE is not set # CONFIG_IEEE1394 is not set # CONFIG_I2O is not set # CONFIG_MACINTOSH_DRIVERS is not set CONFIG_NETDEVICES=y -CONFIG_COMPAT_NET_DEV_OPS=y CONFIG_DUMMY=m CONFIG_BONDING=m # CONFIG_MACVLAN is not set @@ -922,6 +948,7 @@ CONFIG_MII=y # CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set # CONFIG_NET_PCI is not set # CONFIG_B44 is not set +# CONFIG_KS8842 is not set # CONFIG_ATL2 is not set CONFIG_NETDEV_1000=y # CONFIG_ACENIC is not set @@ -941,8 +968,10 @@ CONFIG_NETDEV_1000=y # CONFIG_VIA_VELOCITY is not set # CONFIG_TIGON3 is not set # CONFIG_BNX2 is not set +# CONFIG_CNIC is not set CONFIG_FSL_PQ_MDIO=y CONFIG_GIANFAR=y +# CONFIG_MV643XX_ETH is not set # CONFIG_QLA3XXX is not set # CONFIG_ATL1 is not set # CONFIG_ATL1E is not set @@ -1149,13 +1178,17 @@ CONFIG_DS1682=y # CONFIG_SENSORS_PCF8574 is not set # CONFIG_PCF8575 is not set # CONFIG_SENSORS_PCA9539 is not set -# CONFIG_SENSORS_MAX6875 is not set # CONFIG_SENSORS_TSL2550 is not set # CONFIG_I2C_DEBUG_CORE is not set # CONFIG_I2C_DEBUG_ALGO is not set # CONFIG_I2C_DEBUG_BUS is not set # CONFIG_I2C_DEBUG_CHIP is not set # CONFIG_SPI is not set + +# +# PPS support +# +# CONFIG_PPS is not set CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y CONFIG_ARCH_REQUIRE_GPIOLIB=y CONFIG_GPIOLIB=y @@ -1235,6 +1268,7 @@ CONFIG_SENSORS_LM92=y # CONFIG_SENSORS_SMSC47B397 is not set # CONFIG_SENSORS_ADS7828 is not set # CONFIG_SENSORS_THMC50 is not set +# CONFIG_SENSORS_TMP401 is not set # CONFIG_SENSORS_VIA686A is not set # CONFIG_SENSORS_VT1211 is not set # CONFIG_SENSORS_VT8231 is not set @@ -1290,24 +1324,9 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_MFD_WM8400 is not set # CONFIG_MFD_WM8350_I2C is not set # CONFIG_MFD_PCF50633 is not set +# CONFIG_AB3100_CORE is not set # CONFIG_REGULATOR is not set - -# -# Multimedia devices -# - -# -# Multimedia core support -# -# CONFIG_VIDEO_DEV is not set -# CONFIG_DVB_CORE is not set -# CONFIG_VIDEO_MEDIA is not set - -# -# Multimedia drivers -# -CONFIG_DAB=y -# CONFIG_USB_DABUSB is not set +# CONFIG_MEDIA_SUPPORT is not set # # Graphics support @@ -1352,7 +1371,7 @@ CONFIG_HID_BELKIN=y CONFIG_HID_CHERRY=y CONFIG_HID_CHICONY=y CONFIG_HID_CYPRESS=y -# CONFIG_DRAGONRISE_FF is not set +# CONFIG_HID_DRAGONRISE is not set CONFIG_HID_EZKEY=y # CONFIG_HID_KYE is not set CONFIG_HID_GYRATION=y @@ -1369,10 +1388,11 @@ CONFIG_HID_PETALYNX=y CONFIG_HID_SAMSUNG=y CONFIG_HID_SONY=y CONFIG_HID_SUNPLUS=y -# CONFIG_GREENASIA_FF is not set +# CONFIG_HID_GREENASIA is not set +# CONFIG_HID_SMARTJOYPLUS is not set # CONFIG_HID_TOPSEED is not set -CONFIG_THRUSTMASTER_FF=m -CONFIG_ZEROPLUS_FF=m +# CONFIG_HID_THRUSTMASTER is not set +# CONFIG_HID_ZEROPLUS is not set CONFIG_USB_SUPPORT=y CONFIG_USB_ARCH_HAS_HCD=y CONFIG_USB_ARCH_HAS_OHCI=y @@ -1398,6 +1418,7 @@ CONFIG_USB=y # USB Host Controller Drivers # # CONFIG_USB_C67X00_HCD is not set +# CONFIG_USB_XHCI_HCD is not set CONFIG_USB_EHCI_HCD=y # CONFIG_USB_EHCI_ROOT_HUB_TT is not set # CONFIG_USB_EHCI_TT_NEWSCHED is not set @@ -1407,6 +1428,8 @@ CONFIG_USB_EHCI_HCD=y # CONFIG_USB_ISP116X_HCD is not set # CONFIG_USB_ISP1760_HCD is not set CONFIG_USB_OHCI_HCD=y +# CONFIG_USB_OHCI_HCD_PPC_OF_BE is not set +# CONFIG_USB_OHCI_HCD_PPC_OF_LE is not set # CONFIG_USB_OHCI_HCD_PPC_OF is not set # CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set # CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set @@ -1527,6 +1550,7 @@ CONFIG_RTC_INTF_DEV=y # CONFIG_RTC_DRV_S35390A is not set # CONFIG_RTC_DRV_FM3130 is not set CONFIG_RTC_DRV_RX8581=y +# CONFIG_RTC_DRV_RX8025 is not set # # SPI RTC drivers @@ -1554,6 +1578,10 @@ CONFIG_RTC_DRV_RX8581=y # CONFIG_DMADEVICES is not set # CONFIG_AUXDISPLAY is not set # CONFIG_UIO is not set + +# +# TI VLYNQ +# # CONFIG_STAGING is not set # @@ -1575,10 +1603,12 @@ CONFIG_FS_MBCACHE=y # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set CONFIG_FS_POSIX_ACL=y -CONFIG_FILE_LOCKING=y # CONFIG_XFS_FS is not set +# CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set # CONFIG_BTRFS_FS is not set +CONFIG_FILE_LOCKING=y +CONFIG_FSNOTIFY=y CONFIG_DNOTIFY=y CONFIG_INOTIFY=y CONFIG_INOTIFY_USER=y @@ -1645,6 +1675,7 @@ CONFIG_NFS_FS=y CONFIG_NFS_V3=y # CONFIG_NFS_V3_ACL is not set CONFIG_NFS_V4=y +# CONFIG_NFS_V4_1 is not set CONFIG_ROOT_NFS=y # CONFIG_NFSD is not set CONFIG_LOCKD=y @@ -1734,6 +1765,7 @@ CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y CONFIG_HAVE_LMB=y CONFIG_NLATTR=y +CONFIG_GENERIC_ATOMIC64=y # # Kernel hacking @@ -1759,10 +1791,14 @@ CONFIG_SCHED_DEBUG=y # CONFIG_TIMER_STATS is not set # CONFIG_DEBUG_OBJECTS is not set # CONFIG_DEBUG_SLAB is not set +CONFIG_DEBUG_PREEMPT=y # CONFIG_DEBUG_RT_MUTEXES is not set # CONFIG_RT_MUTEX_TESTER is not set # CONFIG_DEBUG_SPINLOCK is not set # CONFIG_DEBUG_MUTEXES is not set +# CONFIG_DEBUG_LOCK_ALLOC is not set +# CONFIG_PROVE_LOCKING is not set +# CONFIG_LOCK_STAT is not set # CONFIG_DEBUG_SPINLOCK_SLEEP is not set # CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set # CONFIG_DEBUG_KOBJECT is not set @@ -1774,7 +1810,6 @@ CONFIG_DEBUG_INFO=y # CONFIG_DEBUG_LIST is not set # CONFIG_DEBUG_SG is not set # CONFIG_DEBUG_NOTIFIERS is not set -# CONFIG_BOOT_PRINTK_DELAY is not set # CONFIG_RCU_TORTURE_TEST is not set # CONFIG_RCU_CPU_STALL_DETECTOR is not set # CONFIG_BACKTRACE_SELF_TEST is not set @@ -1788,17 +1823,16 @@ CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y CONFIG_HAVE_DYNAMIC_FTRACE=y CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y CONFIG_TRACING_SUPPORT=y - -# -# Tracers -# +CONFIG_FTRACE=y # CONFIG_FUNCTION_TRACER is not set +# CONFIG_IRQSOFF_TRACER is not set # CONFIG_PREEMPT_TRACER is not set # CONFIG_SCHED_TRACER is not set -# CONFIG_CONTEXT_SWITCH_TRACER is not set -# CONFIG_EVENT_TRACER is not set +# CONFIG_ENABLE_DEFAULT_TRACERS is not set # CONFIG_BOOT_TRACER is not set -# CONFIG_TRACE_BRANCH_PROFILING is not set +CONFIG_BRANCH_PROFILE_NONE=y +# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set +# CONFIG_PROFILE_ALL_BRANCHES is not set # CONFIG_STACK_TRACER is not set # CONFIG_KMEMTRACE is not set # CONFIG_WORKQUEUE_TRACER is not set @@ -1806,6 +1840,9 @@ CONFIG_TRACING_SUPPORT=y # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y # CONFIG_KGDB is not set +# CONFIG_KMEMCHECK is not set +# CONFIG_PPC_DISABLE_WERROR is not set +CONFIG_PPC_WERROR=y CONFIG_PRINT_STACK_DEPTH=64 # CONFIG_DEBUG_STACKOVERFLOW is not set # CONFIG_DEBUG_STACK_USAGE is not set @@ -1829,7 +1866,6 @@ CONFIG_SECURITY_NETWORK=y # CONFIG_SECURITY_PATH is not set # CONFIG_SECURITY_FILE_CAPABILITIES is not set # CONFIG_SECURITY_ROOTPLUG is not set -CONFIG_SECURITY_DEFAULT_MMAP_MIN_ADDR=0 # CONFIG_SECURITY_TOMOYO is not set CONFIG_CRYPTO=y diff --git a/arch/powerpc/configs/86xx/mpc8610_hpcd_defconfig b/arch/powerpc/configs/86xx/mpc8610_hpcd_defconfig index cfd2efcc6bc..a61f183f718 100644 --- a/arch/powerpc/configs/86xx/mpc8610_hpcd_defconfig +++ b/arch/powerpc/configs/86xx/mpc8610_hpcd_defconfig @@ -1,26 +1,28 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.30-rc3 -# Wed May 13 17:22:28 2009 +# Linux kernel version: 2.6.31-rc4 +# Wed Jul 29 23:32:27 2009 # # CONFIG_PPC64 is not set # # Processor support # -CONFIG_6xx=y +CONFIG_PPC_BOOK3S_32=y # CONFIG_PPC_85xx is not set # CONFIG_PPC_8xx is not set # CONFIG_40x is not set # CONFIG_44x is not set # CONFIG_E200 is not set CONFIG_PPC_BOOK3S=y +CONFIG_6xx=y CONFIG_PPC_FPU=y # CONFIG_PHYS_64BIT is not set CONFIG_ALTIVEC=y CONFIG_PPC_STD_MMU=y CONFIG_PPC_STD_MMU_32=y # CONFIG_PPC_MM_SLICES is not set +CONFIG_PPC_HAVE_PMU_SUPPORT=y # CONFIG_SMP is not set CONFIG_PPC32=y CONFIG_WORD_SIZE=32 @@ -31,15 +33,16 @@ CONFIG_GENERIC_TIME=y CONFIG_GENERIC_TIME_VSYSCALL=y CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_GENERIC_HARDIRQS=y +CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set CONFIG_IRQ_PER_CPU=y CONFIG_STACKTRACE_SUPPORT=y CONFIG_HAVE_LATENCYTOP_SUPPORT=y +CONFIG_TRACE_IRQFLAGS_SUPPORT=y CONFIG_LOCKDEP_SUPPORT=y CONFIG_RWSEM_XCHGADD_ALGORITHM=y CONFIG_ARCH_HAS_ILOG2_U32=y CONFIG_GENERIC_HWEIGHT=y -CONFIG_GENERIC_CALIBRATE_DELAY=y CONFIG_GENERIC_FIND_NEXT_BIT=y # CONFIG_ARCH_NO_VIRT_TO_BUS is not set CONFIG_PPC=y @@ -53,11 +56,13 @@ CONFIG_PPC_UDBG_16550=y # CONFIG_GENERIC_TBSYNC is not set CONFIG_AUDIT_ARCH=y CONFIG_GENERIC_BUG=y +CONFIG_DTC=y CONFIG_DEFAULT_UIMAGE=y # CONFIG_PPC_DCR_NATIVE is not set # CONFIG_PPC_DCR_MMIO is not set CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" +CONFIG_CONSTRUCTORS=y # # General setup @@ -109,7 +114,6 @@ CONFIG_SYSCTL_SYSCALL=y CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_ALL is not set CONFIG_KALLSYMS_EXTRA_PASS=y -# CONFIG_STRIP_ASM_SYMS is not set CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y @@ -122,9 +126,16 @@ CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y CONFIG_AIO=y +CONFIG_HAVE_PERF_COUNTERS=y + +# +# Performance Counters +# +# CONFIG_PERF_COUNTERS is not set CONFIG_VM_EVENT_COUNTERS=y CONFIG_PCI_QUIRKS=y CONFIG_SLUB_DEBUG=y +# CONFIG_STRIP_ASM_SYMS is not set CONFIG_COMPAT_BRK=y # CONFIG_SLAB is not set CONFIG_SLUB=y @@ -138,6 +149,10 @@ CONFIG_HAVE_IOREMAP_PROT=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_ARCH_TRACEHOOK=y + +# +# GCOV-based kernel profiling +# # CONFIG_SLOW_WORK is not set # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y @@ -150,7 +165,7 @@ CONFIG_MODULE_UNLOAD=y # CONFIG_MODVERSIONS is not set # CONFIG_MODULE_SRCVERSION_ALL is not set CONFIG_BLOCK=y -# CONFIG_LBD is not set +CONFIG_LBDAF=y # CONFIG_BLK_DEV_BSG is not set # CONFIG_BLK_DEV_INTEGRITY is not set @@ -230,6 +245,7 @@ CONFIG_BINFMT_ELF=y # CONFIG_HAVE_AOUT is not set # CONFIG_BINFMT_MISC is not set # CONFIG_IOMMU_HELPER is not set +# CONFIG_SWIOTLB is not set CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y CONFIG_ARCH_HAS_WALK_MEMORY=y CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y @@ -250,9 +266,9 @@ CONFIG_MIGRATION=y CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y -CONFIG_UNEVICTABLE_LRU=y CONFIG_HAVE_MLOCK=y CONFIG_HAVE_MLOCKED_PAGE_BIT=y +CONFIG_DEFAULT_MMAP_MIN_ADDR=4096 CONFIG_PPC_4K_PAGES=y # CONFIG_PPC_16K_PAGES is not set # CONFIG_PPC_64K_PAGES is not set @@ -279,6 +295,8 @@ CONFIG_PCI_DOMAINS=y CONFIG_PCI_SYSCALL=y CONFIG_PCIEPORTBUS=y CONFIG_PCIEAER=y +# CONFIG_PCIE_ECRC is not set +# CONFIG_PCIEAER_INJECT is not set # CONFIG_PCIEASPM is not set CONFIG_ARCH_SUPPORTS_MSI=y # CONFIG_PCI_MSI is not set @@ -381,6 +399,7 @@ CONFIG_IPV6_NDISC_NODETYPE=y # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set # CONFIG_PHONET is not set +# CONFIG_IEEE802154 is not set # CONFIG_NET_SCHED is not set # CONFIG_DCB is not set @@ -398,7 +417,11 @@ CONFIG_WIRELESS=y CONFIG_WIRELESS_OLD_REGULATORY=y # CONFIG_WIRELESS_EXT is not set # CONFIG_LIB80211 is not set -# CONFIG_MAC80211 is not set + +# +# CFG80211 needs to be enabled for MAC80211 +# +CONFIG_MAC80211_DEFAULT_PS_VALUE=0 # CONFIG_WIMAX is not set # CONFIG_RFKILL is not set # CONFIG_NET_9P is not set @@ -549,7 +572,9 @@ CONFIG_MISC_DEVICES=y # # CONFIG_EEPROM_AT24 is not set # CONFIG_EEPROM_LEGACY is not set +# CONFIG_EEPROM_MAX6875 is not set # CONFIG_EEPROM_93CX6 is not set +# CONFIG_CB710_CORE is not set CONFIG_HAVE_IDE=y CONFIG_IDE=y @@ -620,10 +645,6 @@ CONFIG_BLK_DEV_SD=y # CONFIG_BLK_DEV_SR is not set CONFIG_CHR_DEV_SG=y # CONFIG_CHR_DEV_SCH is not set - -# -# Some SCSI devices (e.g. CD jukebox) support multiple LUNs -# # CONFIG_SCSI_MULTI_LUN is not set # CONFIG_SCSI_CONSTANTS is not set # CONFIG_SCSI_LOGGING is not set @@ -640,6 +661,7 @@ CONFIG_SCSI_WAIT_SCAN=m # CONFIG_SCSI_SRP_ATTRS is not set CONFIG_SCSI_LOWLEVEL=y # CONFIG_ISCSI_TCP is not set +# CONFIG_SCSI_BNX2_ISCSI is not set # CONFIG_BLK_DEV_3W_XXXX_RAID is not set # CONFIG_SCSI_3W_9XXX is not set # CONFIG_SCSI_ACARD is not set @@ -648,6 +670,7 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_SCSI_AIC7XXX_OLD is not set # CONFIG_SCSI_AIC79XX is not set # CONFIG_SCSI_AIC94XX is not set +# CONFIG_SCSI_MVSAS is not set # CONFIG_SCSI_DPT_I2O is not set # CONFIG_SCSI_ADVANSYS is not set # CONFIG_SCSI_ARCMSR is not set @@ -667,7 +690,6 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_SCSI_IPS is not set # CONFIG_SCSI_INITIO is not set # CONFIG_SCSI_INIA100 is not set -# CONFIG_SCSI_MVSAS is not set # CONFIG_SCSI_STEX is not set # CONFIG_SCSI_SYM53C8XX_2 is not set # CONFIG_SCSI_IPR is not set @@ -751,14 +773,17 @@ CONFIG_PATA_ALI=y # # -# Enable only one of the two stacks, unless you know what you are doing +# You can enable one or both FireWire driver stacks. +# + +# +# See the help texts for more information. # # CONFIG_FIREWIRE is not set # CONFIG_IEEE1394 is not set # CONFIG_I2O is not set # CONFIG_MACINTOSH_DRIVERS is not set CONFIG_NETDEVICES=y -CONFIG_COMPAT_NET_DEV_OPS=y CONFIG_DUMMY=y # CONFIG_BONDING is not set # CONFIG_MACVLAN is not set @@ -792,6 +817,7 @@ CONFIG_ULI526X=y # CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set # CONFIG_NET_PCI is not set # CONFIG_B44 is not set +# CONFIG_KS8842 is not set # CONFIG_ATL2 is not set # CONFIG_NETDEV_1000 is not set # CONFIG_NETDEV_10000 is not set @@ -959,13 +985,17 @@ CONFIG_I2C_MPC=y # CONFIG_SENSORS_PCF8574 is not set # CONFIG_PCF8575 is not set # CONFIG_SENSORS_PCA9539 is not set -# CONFIG_SENSORS_MAX6875 is not set # CONFIG_SENSORS_TSL2550 is not set # CONFIG_I2C_DEBUG_CORE is not set # CONFIG_I2C_DEBUG_ALGO is not set # CONFIG_I2C_DEBUG_BUS is not set # CONFIG_I2C_DEBUG_CHIP is not set # CONFIG_SPI is not set + +# +# PPS support +# +# CONFIG_PPS is not set CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y # CONFIG_GPIOLIB is not set # CONFIG_W1 is not set @@ -993,23 +1023,9 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_MFD_WM8400 is not set # CONFIG_MFD_WM8350_I2C is not set # CONFIG_MFD_PCF50633 is not set +# CONFIG_AB3100_CORE is not set # CONFIG_REGULATOR is not set - -# -# Multimedia devices -# - -# -# Multimedia core support -# -# CONFIG_VIDEO_DEV is not set -# CONFIG_DVB_CORE is not set -# CONFIG_VIDEO_MEDIA is not set - -# -# Multimedia drivers -# -CONFIG_DAB=y +# CONFIG_MEDIA_SUPPORT is not set # # Graphics support @@ -1106,6 +1122,11 @@ CONFIG_SND_PCM_OSS_PLUGINS=y CONFIG_SND_VERBOSE_PROCFS=y # CONFIG_SND_VERBOSE_PRINTK is not set # CONFIG_SND_DEBUG is not set +# CONFIG_SND_RAWMIDI_SEQ is not set +# CONFIG_SND_OPL3_LIB_SEQ is not set +# CONFIG_SND_OPL4_LIB_SEQ is not set +# CONFIG_SND_SBAWE_SEQ is not set +# CONFIG_SND_EMU10K1_SEQ is not set CONFIG_SND_DRIVERS=y # CONFIG_SND_DUMMY is not set # CONFIG_SND_MTPAV is not set @@ -1130,6 +1151,7 @@ CONFIG_SND_PCI=y # CONFIG_SND_CS4281 is not set # CONFIG_SND_CS46XX is not set # CONFIG_SND_CS5530 is not set +# CONFIG_SND_CTXFI is not set # CONFIG_SND_DARLA20 is not set # CONFIG_SND_GINA20 is not set # CONFIG_SND_LAYLA20 is not set @@ -1160,6 +1182,7 @@ CONFIG_SND_PCI=y # CONFIG_SND_INTEL8X0 is not set # CONFIG_SND_INTEL8X0M is not set # CONFIG_SND_KORG1212 is not set +# CONFIG_SND_LX6464ES is not set # CONFIG_SND_MAESTRO3 is not set # CONFIG_SND_MIXART is not set # CONFIG_SND_NM256 is not set @@ -1251,6 +1274,7 @@ CONFIG_RTC_INTF_DEV=y # CONFIG_RTC_DRV_S35390A is not set # CONFIG_RTC_DRV_FM3130 is not set # CONFIG_RTC_DRV_RX8581 is not set +# CONFIG_RTC_DRV_RX8025 is not set # # SPI RTC drivers @@ -1278,6 +1302,10 @@ CONFIG_RTC_DRV_CMOS=y # CONFIG_DMADEVICES is not set # CONFIG_AUXDISPLAY is not set # CONFIG_UIO is not set + +# +# TI VLYNQ +# # CONFIG_STAGING is not set # @@ -1297,12 +1325,15 @@ CONFIG_FS_MBCACHE=y # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set -CONFIG_FILE_LOCKING=y # CONFIG_XFS_FS is not set +# CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set # CONFIG_BTRFS_FS is not set +CONFIG_FILE_LOCKING=y +CONFIG_FSNOTIFY=y # CONFIG_DNOTIFY is not set # CONFIG_INOTIFY is not set +CONFIG_INOTIFY_USER=y # CONFIG_QUOTA is not set # CONFIG_AUTOFS_FS is not set # CONFIG_AUTOFS4_FS is not set @@ -1464,6 +1495,7 @@ CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y CONFIG_HAVE_LMB=y CONFIG_NLATTR=y +CONFIG_GENERIC_ATOMIC64=y # # Kernel hacking @@ -1494,6 +1526,9 @@ CONFIG_SCHED_DEBUG=y # CONFIG_RT_MUTEX_TESTER is not set # CONFIG_DEBUG_SPINLOCK is not set # CONFIG_DEBUG_MUTEXES is not set +# CONFIG_DEBUG_LOCK_ALLOC is not set +# CONFIG_PROVE_LOCKING is not set +# CONFIG_LOCK_STAT is not set # CONFIG_DEBUG_SPINLOCK_SLEEP is not set # CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set # CONFIG_DEBUG_KOBJECT is not set @@ -1506,7 +1541,6 @@ CONFIG_DEBUG_INFO=y # CONFIG_DEBUG_LIST is not set # CONFIG_DEBUG_SG is not set # CONFIG_DEBUG_NOTIFIERS is not set -# CONFIG_BOOT_PRINTK_DELAY is not set # CONFIG_RCU_TORTURE_TEST is not set # CONFIG_RCU_CPU_STALL_DETECTOR is not set # CONFIG_BACKTRACE_SELF_TEST is not set @@ -1520,16 +1554,15 @@ CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y CONFIG_HAVE_DYNAMIC_FTRACE=y CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y CONFIG_TRACING_SUPPORT=y - -# -# Tracers -# +CONFIG_FTRACE=y # CONFIG_FUNCTION_TRACER is not set +# CONFIG_IRQSOFF_TRACER is not set # CONFIG_SCHED_TRACER is not set -# CONFIG_CONTEXT_SWITCH_TRACER is not set -# CONFIG_EVENT_TRACER is not set +# CONFIG_ENABLE_DEFAULT_TRACERS is not set # CONFIG_BOOT_TRACER is not set -# CONFIG_TRACE_BRANCH_PROFILING is not set +CONFIG_BRANCH_PROFILE_NONE=y +# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set +# CONFIG_PROFILE_ALL_BRANCHES is not set # CONFIG_STACK_TRACER is not set # CONFIG_KMEMTRACE is not set # CONFIG_WORKQUEUE_TRACER is not set @@ -1537,6 +1570,9 @@ CONFIG_TRACING_SUPPORT=y # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y # CONFIG_KGDB is not set +# CONFIG_KMEMCHECK is not set +# CONFIG_PPC_DISABLE_WERROR is not set +CONFIG_PPC_WERROR=y CONFIG_PRINT_STACK_DEPTH=64 # CONFIG_DEBUG_STACKOVERFLOW is not set # CONFIG_DEBUG_STACK_USAGE is not set diff --git a/arch/powerpc/configs/86xx/mpc8641_hpcn_defconfig b/arch/powerpc/configs/86xx/mpc8641_hpcn_defconfig index 0bee3e30394..7016ce73260 100644 --- a/arch/powerpc/configs/86xx/mpc8641_hpcn_defconfig +++ b/arch/powerpc/configs/86xx/mpc8641_hpcn_defconfig @@ -1,26 +1,28 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.30-rc3 -# Wed May 13 17:22:28 2009 +# Linux kernel version: 2.6.31-rc4 +# Wed Jul 29 23:32:28 2009 # # CONFIG_PPC64 is not set # # Processor support # -CONFIG_6xx=y +CONFIG_PPC_BOOK3S_32=y # CONFIG_PPC_85xx is not set # CONFIG_PPC_8xx is not set # CONFIG_40x is not set # CONFIG_44x is not set # CONFIG_E200 is not set CONFIG_PPC_BOOK3S=y +CONFIG_6xx=y CONFIG_PPC_FPU=y # CONFIG_PHYS_64BIT is not set CONFIG_ALTIVEC=y CONFIG_PPC_STD_MMU=y CONFIG_PPC_STD_MMU_32=y # CONFIG_PPC_MM_SLICES is not set +CONFIG_PPC_HAVE_PMU_SUPPORT=y CONFIG_SMP=y CONFIG_NR_CPUS=2 CONFIG_PPC32=y @@ -32,15 +34,16 @@ CONFIG_GENERIC_TIME=y CONFIG_GENERIC_TIME_VSYSCALL=y CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_GENERIC_HARDIRQS=y +CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set CONFIG_IRQ_PER_CPU=y CONFIG_STACKTRACE_SUPPORT=y CONFIG_HAVE_LATENCYTOP_SUPPORT=y +CONFIG_TRACE_IRQFLAGS_SUPPORT=y CONFIG_LOCKDEP_SUPPORT=y CONFIG_RWSEM_XCHGADD_ALGORITHM=y CONFIG_ARCH_HAS_ILOG2_U32=y CONFIG_GENERIC_HWEIGHT=y -CONFIG_GENERIC_CALIBRATE_DELAY=y CONFIG_GENERIC_FIND_NEXT_BIT=y # CONFIG_ARCH_NO_VIRT_TO_BUS is not set CONFIG_PPC=y @@ -54,11 +57,13 @@ CONFIG_PPC_UDBG_16550=y CONFIG_GENERIC_TBSYNC=y CONFIG_AUDIT_ARCH=y CONFIG_GENERIC_BUG=y +CONFIG_DTC=y CONFIG_DEFAULT_UIMAGE=y # CONFIG_PPC_DCR_NATIVE is not set # CONFIG_PPC_DCR_MMIO is not set CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" +CONFIG_CONSTRUCTORS=y # # General setup @@ -113,7 +118,6 @@ CONFIG_SYSCTL_SYSCALL=y CONFIG_KALLSYMS=y CONFIG_KALLSYMS_ALL=y CONFIG_KALLSYMS_EXTRA_PASS=y -# CONFIG_STRIP_ASM_SYMS is not set CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y @@ -126,9 +130,16 @@ CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y CONFIG_AIO=y +CONFIG_HAVE_PERF_COUNTERS=y + +# +# Performance Counters +# +# CONFIG_PERF_COUNTERS is not set CONFIG_VM_EVENT_COUNTERS=y CONFIG_PCI_QUIRKS=y CONFIG_SLUB_DEBUG=y +# CONFIG_STRIP_ASM_SYMS is not set CONFIG_COMPAT_BRK=y # CONFIG_SLAB is not set CONFIG_SLUB=y @@ -143,6 +154,10 @@ CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_ARCH_TRACEHOOK=y CONFIG_USE_GENERIC_SMP_HELPERS=y + +# +# GCOV-based kernel profiling +# # CONFIG_SLOW_WORK is not set # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y @@ -156,7 +171,7 @@ CONFIG_MODVERSIONS=y # CONFIG_MODULE_SRCVERSION_ALL is not set CONFIG_STOP_MACHINE=y CONFIG_BLOCK=y -CONFIG_LBD=y +CONFIG_LBDAF=y # CONFIG_BLK_DEV_BSG is not set # CONFIG_BLK_DEV_INTEGRITY is not set @@ -234,7 +249,9 @@ CONFIG_BINFMT_ELF=y # CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set # CONFIG_HAVE_AOUT is not set CONFIG_BINFMT_MISC=m -# CONFIG_IOMMU_HELPER is not set +CONFIG_IOMMU_HELPER=y +CONFIG_SWIOTLB=y +CONFIG_PPC_NEED_DMA_SYNC_OPS=y CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y CONFIG_ARCH_HAS_WALK_MEMORY=y CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y @@ -256,9 +273,9 @@ CONFIG_MIGRATION=y CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y -CONFIG_UNEVICTABLE_LRU=y CONFIG_HAVE_MLOCK=y CONFIG_HAVE_MLOCKED_PAGE_BIT=y +CONFIG_DEFAULT_MMAP_MIN_ADDR=4096 CONFIG_PPC_4K_PAGES=y # CONFIG_PPC_16K_PAGES is not set # CONFIG_PPC_64K_PAGES is not set @@ -401,6 +418,7 @@ CONFIG_SCTP_HMAC_MD5=y # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set # CONFIG_PHONET is not set +# CONFIG_IEEE802154 is not set # CONFIG_NET_SCHED is not set # CONFIG_DCB is not set @@ -419,7 +437,11 @@ CONFIG_WIRELESS=y CONFIG_WIRELESS_OLD_REGULATORY=y # CONFIG_WIRELESS_EXT is not set # CONFIG_LIB80211 is not set -# CONFIG_MAC80211 is not set + +# +# CFG80211 needs to be enabled for MAC80211 +# +CONFIG_MAC80211_DEFAULT_PS_VALUE=0 # CONFIG_WIMAX is not set # CONFIG_RFKILL is not set # CONFIG_NET_9P is not set @@ -444,6 +466,7 @@ CONFIG_EXTRA_FIRMWARE="" # CONFIG_MTD is not set CONFIG_OF_DEVICE=y CONFIG_OF_I2C=y +CONFIG_OF_MDIO=y # CONFIG_PARPORT is not set CONFIG_BLK_DEV=y # CONFIG_BLK_DEV_FD is not set @@ -479,7 +502,9 @@ CONFIG_MISC_DEVICES=y # # CONFIG_EEPROM_AT24 is not set CONFIG_EEPROM_LEGACY=y +# CONFIG_EEPROM_MAX6875 is not set # CONFIG_EEPROM_93CX6 is not set +# CONFIG_CB710_CORE is not set CONFIG_HAVE_IDE=y # CONFIG_IDE is not set @@ -503,10 +528,6 @@ CONFIG_BLK_DEV_SR=y # CONFIG_BLK_DEV_SR_VENDOR is not set CONFIG_CHR_DEV_SG=y # CONFIG_CHR_DEV_SCH is not set - -# -# Some SCSI devices (e.g. CD jukebox) support multiple LUNs -# CONFIG_SCSI_MULTI_LUN=y # CONFIG_SCSI_CONSTANTS is not set CONFIG_SCSI_LOGGING=y @@ -524,6 +545,7 @@ CONFIG_SCSI_WAIT_SCAN=m CONFIG_SCSI_LOWLEVEL=y # CONFIG_ISCSI_TCP is not set # CONFIG_SCSI_CXGB3_ISCSI is not set +# CONFIG_SCSI_BNX2_ISCSI is not set # CONFIG_BLK_DEV_3W_XXXX_RAID is not set # CONFIG_SCSI_3W_9XXX is not set # CONFIG_SCSI_ACARD is not set @@ -532,6 +554,7 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_SCSI_AIC7XXX_OLD is not set # CONFIG_SCSI_AIC79XX is not set # CONFIG_SCSI_AIC94XX is not set +# CONFIG_SCSI_MVSAS is not set # CONFIG_SCSI_DPT_I2O is not set # CONFIG_SCSI_ADVANSYS is not set # CONFIG_SCSI_ARCMSR is not set @@ -551,7 +574,6 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_SCSI_IPS is not set # CONFIG_SCSI_INITIO is not set # CONFIG_SCSI_INIA100 is not set -# CONFIG_SCSI_MVSAS is not set # CONFIG_SCSI_STEX is not set # CONFIG_SCSI_SYM53C8XX_2 is not set # CONFIG_SCSI_IPR is not set @@ -635,14 +657,17 @@ CONFIG_PATA_ALI=y # # -# Enable only one of the two stacks, unless you know what you are doing +# You can enable one or both FireWire driver stacks. +# + +# +# See the help texts for more information. # # CONFIG_FIREWIRE is not set # CONFIG_IEEE1394 is not set # CONFIG_I2O is not set # CONFIG_MACINTOSH_DRIVERS is not set CONFIG_NETDEVICES=y -CONFIG_COMPAT_NET_DEV_OPS=y CONFIG_DUMMY=y # CONFIG_BONDING is not set # CONFIG_MACVLAN is not set @@ -689,6 +714,7 @@ CONFIG_MII=y # CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set # CONFIG_NET_PCI is not set # CONFIG_B44 is not set +# CONFIG_KS8842 is not set # CONFIG_ATL2 is not set CONFIG_NETDEV_1000=y # CONFIG_ACENIC is not set @@ -708,8 +734,10 @@ CONFIG_NETDEV_1000=y # CONFIG_VIA_VELOCITY is not set # CONFIG_TIGON3 is not set # CONFIG_BNX2 is not set +# CONFIG_CNIC is not set CONFIG_FSL_PQ_MDIO=y CONFIG_GIANFAR=y +# CONFIG_MV643XX_ETH is not set # CONFIG_QLA3XXX is not set # CONFIG_ATL1 is not set # CONFIG_ATL1E is not set @@ -909,13 +937,17 @@ CONFIG_I2C_MPC=y # CONFIG_SENSORS_PCF8574 is not set # CONFIG_PCF8575 is not set # CONFIG_SENSORS_PCA9539 is not set -# CONFIG_SENSORS_MAX6875 is not set # CONFIG_SENSORS_TSL2550 is not set # CONFIG_I2C_DEBUG_CORE is not set # CONFIG_I2C_DEBUG_ALGO is not set # CONFIG_I2C_DEBUG_BUS is not set # CONFIG_I2C_DEBUG_CHIP is not set # CONFIG_SPI is not set + +# +# PPS support +# +# CONFIG_PPS is not set CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y # CONFIG_GPIOLIB is not set # CONFIG_W1 is not set @@ -943,76 +975,9 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_MFD_WM8400 is not set # CONFIG_MFD_WM8350_I2C is not set # CONFIG_MFD_PCF50633 is not set +# CONFIG_AB3100_CORE is not set # CONFIG_REGULATOR is not set - -# -# Multimedia devices -# - -# -# Multimedia core support -# -# CONFIG_VIDEO_DEV is not set -CONFIG_DVB_CORE=m -CONFIG_VIDEO_MEDIA=m - -# -# Multimedia drivers -# -# CONFIG_MEDIA_ATTACH is not set -CONFIG_MEDIA_TUNER=m -# CONFIG_MEDIA_TUNER_CUSTOMISE is not set -CONFIG_MEDIA_TUNER_SIMPLE=m -CONFIG_MEDIA_TUNER_TDA8290=m -CONFIG_MEDIA_TUNER_TDA9887=m -CONFIG_MEDIA_TUNER_TEA5761=m -CONFIG_MEDIA_TUNER_TEA5767=m -CONFIG_MEDIA_TUNER_MT20XX=m -CONFIG_MEDIA_TUNER_XC2028=m -CONFIG_MEDIA_TUNER_XC5000=m -CONFIG_MEDIA_TUNER_MC44S803=m -# CONFIG_DVB_DYNAMIC_MINORS is not set -CONFIG_DVB_CAPTURE_DRIVERS=y - -# -# Supported SAA7146 based PCI Adapters -# -# CONFIG_TTPCI_EEPROM is not set -# CONFIG_DVB_BUDGET_CORE is not set - -# -# Supported USB Adapters -# -# CONFIG_DVB_USB is not set -# CONFIG_DVB_TTUSB_BUDGET is not set -# CONFIG_DVB_TTUSB_DEC is not set -# CONFIG_DVB_SIANO_SMS1XXX is not set - -# -# Supported FlexCopII (B2C2) Adapters -# -# CONFIG_DVB_B2C2_FLEXCOP is not set - -# -# Supported BT878 Adapters -# - -# -# Supported Pluto2 Adapters -# -# CONFIG_DVB_PLUTO2 is not set - -# -# Supported SDMC DM1105 Adapters -# -# CONFIG_DVB_DM1105 is not set - -# -# Supported DVB Frontends -# -# CONFIG_DVB_FE_CUSTOMISE is not set -CONFIG_DAB=y -# CONFIG_USB_DABUSB is not set +# CONFIG_MEDIA_SUPPORT is not set # # Graphics support @@ -1052,6 +1017,11 @@ CONFIG_SND_VERBOSE_PROCFS=y # CONFIG_SND_VERBOSE_PRINTK is not set # CONFIG_SND_DEBUG is not set CONFIG_SND_VMASTER=y +# CONFIG_SND_RAWMIDI_SEQ is not set +# CONFIG_SND_OPL3_LIB_SEQ is not set +# CONFIG_SND_OPL4_LIB_SEQ is not set +# CONFIG_SND_SBAWE_SEQ is not set +# CONFIG_SND_EMU10K1_SEQ is not set CONFIG_SND_AC97_CODEC=y CONFIG_SND_DRIVERS=y # CONFIG_SND_DUMMY is not set @@ -1078,6 +1048,7 @@ CONFIG_SND_PCI=y # CONFIG_SND_CS4281 is not set # CONFIG_SND_CS46XX is not set # CONFIG_SND_CS5530 is not set +# CONFIG_SND_CTXFI is not set # CONFIG_SND_DARLA20 is not set # CONFIG_SND_GINA20 is not set # CONFIG_SND_LAYLA20 is not set @@ -1108,6 +1079,7 @@ CONFIG_SND_PCI=y CONFIG_SND_INTEL8X0=y # CONFIG_SND_INTEL8X0M is not set # CONFIG_SND_KORG1212 is not set +# CONFIG_SND_LX6464ES is not set # CONFIG_SND_MAESTRO3 is not set # CONFIG_SND_MIXART is not set # CONFIG_SND_NM256 is not set @@ -1152,7 +1124,7 @@ CONFIG_HID_BELKIN=y CONFIG_HID_CHERRY=y CONFIG_HID_CHICONY=y CONFIG_HID_CYPRESS=y -# CONFIG_DRAGONRISE_FF is not set +# CONFIG_HID_DRAGONRISE is not set CONFIG_HID_EZKEY=y # CONFIG_HID_KYE is not set CONFIG_HID_GYRATION=y @@ -1169,10 +1141,11 @@ CONFIG_HID_PETALYNX=y CONFIG_HID_SAMSUNG=y CONFIG_HID_SONY=y CONFIG_HID_SUNPLUS=y -# CONFIG_GREENASIA_FF is not set +# CONFIG_HID_GREENASIA is not set +# CONFIG_HID_SMARTJOYPLUS is not set # CONFIG_HID_TOPSEED is not set -CONFIG_THRUSTMASTER_FF=m -CONFIG_ZEROPLUS_FF=m +# CONFIG_HID_THRUSTMASTER is not set +# CONFIG_HID_ZEROPLUS is not set CONFIG_USB_SUPPORT=y CONFIG_USB_ARCH_HAS_HCD=y CONFIG_USB_ARCH_HAS_OHCI=y @@ -1198,6 +1171,7 @@ CONFIG_USB_MON=y # USB Host Controller Drivers # # CONFIG_USB_C67X00_HCD is not set +# CONFIG_USB_XHCI_HCD is not set CONFIG_USB_EHCI_HCD=y # CONFIG_USB_EHCI_ROOT_HUB_TT is not set # CONFIG_USB_EHCI_TT_NEWSCHED is not set @@ -1207,9 +1181,9 @@ CONFIG_USB_EHCI_HCD_PPC_OF=y # CONFIG_USB_ISP116X_HCD is not set # CONFIG_USB_ISP1760_HCD is not set CONFIG_USB_OHCI_HCD=y -CONFIG_USB_OHCI_HCD_PPC_OF=y CONFIG_USB_OHCI_HCD_PPC_OF_BE=y CONFIG_USB_OHCI_HCD_PPC_OF_LE=y +CONFIG_USB_OHCI_HCD_PPC_OF=y CONFIG_USB_OHCI_HCD_PCI=y CONFIG_USB_OHCI_BIG_ENDIAN_DESC=y CONFIG_USB_OHCI_BIG_ENDIAN_MMIO=y @@ -1329,6 +1303,7 @@ CONFIG_RTC_INTF_DEV=y # CONFIG_RTC_DRV_S35390A is not set # CONFIG_RTC_DRV_FM3130 is not set # CONFIG_RTC_DRV_RX8581 is not set +# CONFIG_RTC_DRV_RX8025 is not set # # SPI RTC drivers @@ -1356,6 +1331,10 @@ CONFIG_RTC_DRV_CMOS=y # CONFIG_DMADEVICES is not set # CONFIG_AUXDISPLAY is not set # CONFIG_UIO is not set + +# +# TI VLYNQ +# # CONFIG_STAGING is not set # @@ -1375,11 +1354,12 @@ CONFIG_FS_MBCACHE=y # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set -CONFIG_FILE_LOCKING=y # CONFIG_XFS_FS is not set # CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set # CONFIG_BTRFS_FS is not set +CONFIG_FILE_LOCKING=y +CONFIG_FSNOTIFY=y CONFIG_DNOTIFY=y CONFIG_INOTIFY=y CONFIG_INOTIFY_USER=y @@ -1454,6 +1434,7 @@ CONFIG_NFS_FS=y CONFIG_NFS_V3=y # CONFIG_NFS_V3_ACL is not set CONFIG_NFS_V4=y +# CONFIG_NFS_V4_1 is not set CONFIG_ROOT_NFS=y CONFIG_NFSD=y # CONFIG_NFSD_V3 is not set @@ -1555,6 +1536,7 @@ CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y CONFIG_HAVE_LMB=y CONFIG_NLATTR=y +CONFIG_GENERIC_ATOMIC64=y # # Kernel hacking @@ -1585,6 +1567,9 @@ CONFIG_SCHED_DEBUG=y # CONFIG_RT_MUTEX_TESTER is not set # CONFIG_DEBUG_SPINLOCK is not set # CONFIG_DEBUG_MUTEXES is not set +# CONFIG_DEBUG_LOCK_ALLOC is not set +# CONFIG_PROVE_LOCKING is not set +# CONFIG_LOCK_STAT is not set # CONFIG_DEBUG_SPINLOCK_SLEEP is not set # CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set # CONFIG_DEBUG_KOBJECT is not set @@ -1597,7 +1582,6 @@ CONFIG_DEBUG_INFO=y # CONFIG_DEBUG_LIST is not set # CONFIG_DEBUG_SG is not set # CONFIG_DEBUG_NOTIFIERS is not set -# CONFIG_BOOT_PRINTK_DELAY is not set # CONFIG_RCU_TORTURE_TEST is not set # CONFIG_RCU_CPU_STALL_DETECTOR is not set # CONFIG_BACKTRACE_SELF_TEST is not set @@ -1611,16 +1595,15 @@ CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y CONFIG_HAVE_DYNAMIC_FTRACE=y CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y CONFIG_TRACING_SUPPORT=y - -# -# Tracers -# +CONFIG_FTRACE=y # CONFIG_FUNCTION_TRACER is not set +# CONFIG_IRQSOFF_TRACER is not set # CONFIG_SCHED_TRACER is not set -# CONFIG_CONTEXT_SWITCH_TRACER is not set -# CONFIG_EVENT_TRACER is not set +# CONFIG_ENABLE_DEFAULT_TRACERS is not set # CONFIG_BOOT_TRACER is not set -# CONFIG_TRACE_BRANCH_PROFILING is not set +CONFIG_BRANCH_PROFILE_NONE=y +# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set +# CONFIG_PROFILE_ALL_BRANCHES is not set # CONFIG_STACK_TRACER is not set # CONFIG_KMEMTRACE is not set # CONFIG_WORKQUEUE_TRACER is not set @@ -1628,6 +1611,9 @@ CONFIG_TRACING_SUPPORT=y # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y # CONFIG_KGDB is not set +# CONFIG_KMEMCHECK is not set +# CONFIG_PPC_DISABLE_WERROR is not set +CONFIG_PPC_WERROR=y CONFIG_PRINT_STACK_DEPTH=64 # CONFIG_DEBUG_STACKOVERFLOW is not set # CONFIG_DEBUG_STACK_USAGE is not set diff --git a/arch/powerpc/configs/86xx/sbc8641d_defconfig b/arch/powerpc/configs/86xx/sbc8641d_defconfig index c30a0c71587..f5ca2e0cd40 100644 --- a/arch/powerpc/configs/86xx/sbc8641d_defconfig +++ b/arch/powerpc/configs/86xx/sbc8641d_defconfig @@ -1,26 +1,28 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.30-rc3 -# Wed May 13 17:22:27 2009 +# Linux kernel version: 2.6.31-rc4 +# Wed Jul 29 23:32:26 2009 # # CONFIG_PPC64 is not set # # Processor support # -CONFIG_6xx=y +CONFIG_PPC_BOOK3S_32=y # CONFIG_PPC_85xx is not set # CONFIG_PPC_8xx is not set # CONFIG_40x is not set # CONFIG_44x is not set # CONFIG_E200 is not set CONFIG_PPC_BOOK3S=y +CONFIG_6xx=y CONFIG_PPC_FPU=y # CONFIG_PHYS_64BIT is not set CONFIG_ALTIVEC=y CONFIG_PPC_STD_MMU=y CONFIG_PPC_STD_MMU_32=y # CONFIG_PPC_MM_SLICES is not set +CONFIG_PPC_HAVE_PMU_SUPPORT=y CONFIG_SMP=y CONFIG_NR_CPUS=2 CONFIG_PPC32=y @@ -32,16 +34,17 @@ CONFIG_GENERIC_TIME=y CONFIG_GENERIC_TIME_VSYSCALL=y CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_GENERIC_HARDIRQS=y +CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set CONFIG_IRQ_PER_CPU=y CONFIG_STACKTRACE_SUPPORT=y CONFIG_HAVE_LATENCYTOP_SUPPORT=y +CONFIG_TRACE_IRQFLAGS_SUPPORT=y CONFIG_LOCKDEP_SUPPORT=y CONFIG_RWSEM_XCHGADD_ALGORITHM=y CONFIG_GENERIC_LOCKBREAK=y CONFIG_ARCH_HAS_ILOG2_U32=y CONFIG_GENERIC_HWEIGHT=y -CONFIG_GENERIC_CALIBRATE_DELAY=y CONFIG_GENERIC_FIND_NEXT_BIT=y # CONFIG_ARCH_NO_VIRT_TO_BUS is not set CONFIG_PPC=y @@ -55,11 +58,13 @@ CONFIG_PPC_UDBG_16550=y CONFIG_GENERIC_TBSYNC=y CONFIG_AUDIT_ARCH=y CONFIG_GENERIC_BUG=y +CONFIG_DTC=y CONFIG_DEFAULT_UIMAGE=y # CONFIG_PPC_DCR_NATIVE is not set # CONFIG_PPC_DCR_MMIO is not set CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" +CONFIG_CONSTRUCTORS=y # # General setup @@ -113,7 +118,6 @@ CONFIG_SYSCTL_SYSCALL=y CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_ALL is not set # CONFIG_KALLSYMS_EXTRA_PASS is not set -# CONFIG_STRIP_ASM_SYMS is not set CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y @@ -126,8 +130,15 @@ CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y CONFIG_AIO=y +CONFIG_HAVE_PERF_COUNTERS=y + +# +# Performance Counters +# +# CONFIG_PERF_COUNTERS is not set CONFIG_VM_EVENT_COUNTERS=y CONFIG_PCI_QUIRKS=y +# CONFIG_STRIP_ASM_SYMS is not set CONFIG_COMPAT_BRK=y CONFIG_SLAB=y # CONFIG_SLUB is not set @@ -142,6 +153,11 @@ CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_ARCH_TRACEHOOK=y CONFIG_USE_GENERIC_SMP_HELPERS=y + +# +# GCOV-based kernel profiling +# +# CONFIG_GCOV_KERNEL is not set # CONFIG_SLOW_WORK is not set # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y @@ -155,7 +171,7 @@ CONFIG_MODULE_UNLOAD=y # CONFIG_MODULE_SRCVERSION_ALL is not set CONFIG_STOP_MACHINE=y CONFIG_BLOCK=y -# CONFIG_LBD is not set +CONFIG_LBDAF=y # CONFIG_BLK_DEV_BSG is not set # CONFIG_BLK_DEV_INTEGRITY is not set @@ -234,6 +250,7 @@ CONFIG_BINFMT_ELF=y # CONFIG_HAVE_AOUT is not set CONFIG_BINFMT_MISC=m # CONFIG_IOMMU_HELPER is not set +# CONFIG_SWIOTLB is not set CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y CONFIG_ARCH_HAS_WALK_MEMORY=y CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y @@ -255,9 +272,9 @@ CONFIG_MIGRATION=y CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y -CONFIG_UNEVICTABLE_LRU=y CONFIG_HAVE_MLOCK=y CONFIG_HAVE_MLOCKED_PAGE_BIT=y +CONFIG_DEFAULT_MMAP_MIN_ADDR=4096 CONFIG_PPC_4K_PAGES=y # CONFIG_PPC_16K_PAGES is not set # CONFIG_PPC_64K_PAGES is not set @@ -284,6 +301,8 @@ CONFIG_PCI_DOMAINS=y CONFIG_PCI_SYSCALL=y CONFIG_PCIEPORTBUS=y CONFIG_PCIEAER=y +# CONFIG_PCIE_ECRC is not set +# CONFIG_PCIEAER_INJECT is not set # CONFIG_PCIEASPM is not set CONFIG_ARCH_SUPPORTS_MSI=y # CONFIG_PCI_MSI is not set @@ -508,6 +527,7 @@ CONFIG_LLC=m # CONFIG_ECONET is not set CONFIG_WAN_ROUTER=m # CONFIG_PHONET is not set +# CONFIG_IEEE802154 is not set CONFIG_NET_SCHED=y # @@ -564,7 +584,11 @@ CONFIG_WIRELESS=y CONFIG_WIRELESS_OLD_REGULATORY=y # CONFIG_WIRELESS_EXT is not set # CONFIG_LIB80211 is not set -# CONFIG_MAC80211 is not set + +# +# CFG80211 needs to be enabled for MAC80211 +# +CONFIG_MAC80211_DEFAULT_PS_VALUE=0 # CONFIG_WIMAX is not set # CONFIG_RFKILL is not set # CONFIG_NET_9P is not set @@ -675,6 +699,7 @@ CONFIG_MTD_PHYSMAP_OF=y # CONFIG_MTD_UBI is not set CONFIG_OF_DEVICE=y CONFIG_OF_I2C=y +CONFIG_OF_MDIO=y # CONFIG_PARPORT is not set CONFIG_BLK_DEV=y # CONFIG_BLK_DEV_FD is not set @@ -709,7 +734,9 @@ CONFIG_MISC_DEVICES=y # # CONFIG_EEPROM_AT24 is not set # CONFIG_EEPROM_LEGACY is not set +# CONFIG_EEPROM_MAX6875 is not set # CONFIG_EEPROM_93CX6 is not set +# CONFIG_CB710_CORE is not set CONFIG_HAVE_IDE=y # CONFIG_IDE is not set @@ -736,6 +763,7 @@ CONFIG_BLK_DEV_DM=y CONFIG_DM_CRYPT=y CONFIG_DM_SNAPSHOT=y CONFIG_DM_MIRROR=y +# CONFIG_DM_LOG_USERSPACE is not set CONFIG_DM_ZERO=y # CONFIG_DM_MULTIPATH is not set # CONFIG_DM_DELAY is not set @@ -747,14 +775,17 @@ CONFIG_DM_ZERO=y # # -# Enable only one of the two stacks, unless you know what you are doing +# You can enable one or both FireWire driver stacks. +# + +# +# See the help texts for more information. # # CONFIG_FIREWIRE is not set # CONFIG_IEEE1394 is not set # CONFIG_I2O is not set # CONFIG_MACINTOSH_DRIVERS is not set CONFIG_NETDEVICES=y -CONFIG_COMPAT_NET_DEV_OPS=y CONFIG_DUMMY=m CONFIG_BONDING=m # CONFIG_MACVLAN is not set @@ -801,6 +832,7 @@ CONFIG_MII=y # CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set # CONFIG_NET_PCI is not set # CONFIG_B44 is not set +# CONFIG_KS8842 is not set # CONFIG_ATL2 is not set CONFIG_NETDEV_1000=y # CONFIG_ACENIC is not set @@ -820,8 +852,10 @@ CONFIG_NETDEV_1000=y # CONFIG_VIA_VELOCITY is not set # CONFIG_TIGON3 is not set # CONFIG_BNX2 is not set +# CONFIG_CNIC is not set CONFIG_FSL_PQ_MDIO=y CONFIG_GIANFAR=y +# CONFIG_MV643XX_ETH is not set # CONFIG_QLA3XXX is not set # CONFIG_ATL1 is not set # CONFIG_ATL1E is not set @@ -1018,13 +1052,17 @@ CONFIG_I2C_MPC=y # CONFIG_SENSORS_PCF8574 is not set # CONFIG_PCF8575 is not set # CONFIG_SENSORS_PCA9539 is not set -# CONFIG_SENSORS_MAX6875 is not set # CONFIG_SENSORS_TSL2550 is not set # CONFIG_I2C_DEBUG_CORE is not set # CONFIG_I2C_DEBUG_ALGO is not set # CONFIG_I2C_DEBUG_BUS is not set # CONFIG_I2C_DEBUG_CHIP is not set # CONFIG_SPI is not set + +# +# PPS support +# +# CONFIG_PPS is not set CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y # CONFIG_GPIOLIB is not set # CONFIG_W1 is not set @@ -1079,6 +1117,7 @@ CONFIG_HWMON=y # CONFIG_SENSORS_SMSC47B397 is not set # CONFIG_SENSORS_ADS7828 is not set # CONFIG_SENSORS_THMC50 is not set +# CONFIG_SENSORS_TMP401 is not set # CONFIG_SENSORS_VIA686A is not set # CONFIG_SENSORS_VT1211 is not set # CONFIG_SENSORS_VT8231 is not set @@ -1127,23 +1166,9 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_MFD_WM8400 is not set # CONFIG_MFD_WM8350_I2C is not set # CONFIG_MFD_PCF50633 is not set +# CONFIG_AB3100_CORE is not set # CONFIG_REGULATOR is not set - -# -# Multimedia devices -# - -# -# Multimedia core support -# -# CONFIG_VIDEO_DEV is not set -# CONFIG_DVB_CORE is not set -# CONFIG_VIDEO_MEDIA is not set - -# -# Multimedia drivers -# -CONFIG_DAB=y +# CONFIG_MEDIA_SUPPORT is not set # # Graphics support @@ -1207,6 +1232,10 @@ CONFIG_USB_ARCH_HAS_EHCI=y # CONFIG_DMADEVICES is not set # CONFIG_AUXDISPLAY is not set # CONFIG_UIO is not set + +# +# TI VLYNQ +# # CONFIG_STAGING is not set # @@ -1236,8 +1265,8 @@ CONFIG_REISERFS_FS_POSIX_ACL=y # CONFIG_REISERFS_FS_SECURITY is not set # CONFIG_JFS_FS is not set CONFIG_FS_POSIX_ACL=y -CONFIG_FILE_LOCKING=y # CONFIG_XFS_FS is not set +# CONFIG_GFS2_FS is not set CONFIG_OCFS2_FS=m CONFIG_OCFS2_FS_O2CB=m CONFIG_OCFS2_FS_STATS=y @@ -1245,6 +1274,8 @@ CONFIG_OCFS2_DEBUG_MASKLOG=y # CONFIG_OCFS2_DEBUG_FS is not set # CONFIG_OCFS2_FS_POSIX_ACL is not set # CONFIG_BTRFS_FS is not set +CONFIG_FILE_LOCKING=y +CONFIG_FSNOTIFY=y CONFIG_DNOTIFY=y CONFIG_INOTIFY=y CONFIG_INOTIFY_USER=y @@ -1318,6 +1349,7 @@ CONFIG_NFS_FS=y CONFIG_NFS_V3=y # CONFIG_NFS_V3_ACL is not set CONFIG_NFS_V4=y +# CONFIG_NFS_V4_1 is not set CONFIG_ROOT_NFS=y # CONFIG_NFSD is not set CONFIG_LOCKD=y @@ -1409,6 +1441,7 @@ CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y CONFIG_HAVE_LMB=y CONFIG_NLATTR=y +CONFIG_GENERIC_ATOMIC64=y # # Kernel hacking @@ -1434,10 +1467,14 @@ CONFIG_SCHED_DEBUG=y # CONFIG_TIMER_STATS is not set # CONFIG_DEBUG_OBJECTS is not set # CONFIG_DEBUG_SLAB is not set +CONFIG_DEBUG_PREEMPT=y # CONFIG_DEBUG_RT_MUTEXES is not set # CONFIG_RT_MUTEX_TESTER is not set # CONFIG_DEBUG_SPINLOCK is not set # CONFIG_DEBUG_MUTEXES is not set +# CONFIG_DEBUG_LOCK_ALLOC is not set +# CONFIG_PROVE_LOCKING is not set +# CONFIG_LOCK_STAT is not set # CONFIG_DEBUG_SPINLOCK_SLEEP is not set # CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set # CONFIG_DEBUG_KOBJECT is not set @@ -1449,7 +1486,6 @@ CONFIG_DEBUG_INFO=y # CONFIG_DEBUG_LIST is not set # CONFIG_DEBUG_SG is not set # CONFIG_DEBUG_NOTIFIERS is not set -# CONFIG_BOOT_PRINTK_DELAY is not set # CONFIG_RCU_TORTURE_TEST is not set # CONFIG_RCU_CPU_STALL_DETECTOR is not set # CONFIG_BACKTRACE_SELF_TEST is not set @@ -1463,17 +1499,16 @@ CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y CONFIG_HAVE_DYNAMIC_FTRACE=y CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y CONFIG_TRACING_SUPPORT=y - -# -# Tracers -# +CONFIG_FTRACE=y # CONFIG_FUNCTION_TRACER is not set +# CONFIG_IRQSOFF_TRACER is not set # CONFIG_PREEMPT_TRACER is not set # CONFIG_SCHED_TRACER is not set -# CONFIG_CONTEXT_SWITCH_TRACER is not set -# CONFIG_EVENT_TRACER is not set +# CONFIG_ENABLE_DEFAULT_TRACERS is not set # CONFIG_BOOT_TRACER is not set -# CONFIG_TRACE_BRANCH_PROFILING is not set +CONFIG_BRANCH_PROFILE_NONE=y +# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set +# CONFIG_PROFILE_ALL_BRANCHES is not set # CONFIG_STACK_TRACER is not set # CONFIG_KMEMTRACE is not set # CONFIG_WORKQUEUE_TRACER is not set @@ -1482,9 +1517,13 @@ CONFIG_TRACING_SUPPORT=y # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y # CONFIG_KGDB is not set +# CONFIG_KMEMCHECK is not set +# CONFIG_PPC_DISABLE_WERROR is not set +CONFIG_PPC_WERROR=y CONFIG_PRINT_STACK_DEPTH=64 # CONFIG_DEBUG_STACKOVERFLOW is not set # CONFIG_DEBUG_STACK_USAGE is not set +# CONFIG_PPC_EMULATED_STATS is not set # CONFIG_CODE_PATCHING_SELFTEST is not set # CONFIG_FTR_FIXUP_SELFTEST is not set # CONFIG_MSI_BITMAP_SELFTEST is not set @@ -1505,7 +1544,6 @@ CONFIG_SECURITY_NETWORK=y # CONFIG_SECURITY_NETWORK_XFRM is not set # CONFIG_SECURITY_PATH is not set # CONFIG_SECURITY_FILE_CAPABILITIES is not set -CONFIG_SECURITY_DEFAULT_MMAP_MIN_ADDR=0 # CONFIG_SECURITY_TOMOYO is not set CONFIG_CRYPTO=y diff --git a/arch/powerpc/configs/adder875_defconfig b/arch/powerpc/configs/adder875_defconfig index 74f7f7c6fdc..aece6bb5f73 100644 --- a/arch/powerpc/configs/adder875_defconfig +++ b/arch/powerpc/configs/adder875_defconfig @@ -1,14 +1,14 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.30-rc3 -# Wed May 13 17:21:50 2009 +# Linux kernel version: 2.6.31-rc4 +# Wed Jul 29 23:31:47 2009 # # CONFIG_PPC64 is not set # # Processor support # -# CONFIG_6xx is not set +# CONFIG_PPC_BOOK3S_32 is not set # CONFIG_PPC_85xx is not set CONFIG_PPC_8xx=y # CONFIG_40x is not set @@ -27,15 +27,16 @@ CONFIG_GENERIC_TIME=y CONFIG_GENERIC_TIME_VSYSCALL=y CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_GENERIC_HARDIRQS=y +CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set CONFIG_IRQ_PER_CPU=y CONFIG_STACKTRACE_SUPPORT=y CONFIG_HAVE_LATENCYTOP_SUPPORT=y +CONFIG_TRACE_IRQFLAGS_SUPPORT=y CONFIG_LOCKDEP_SUPPORT=y CONFIG_RWSEM_XCHGADD_ALGORITHM=y CONFIG_ARCH_HAS_ILOG2_U32=y CONFIG_GENERIC_HWEIGHT=y -CONFIG_GENERIC_CALIBRATE_DELAY=y CONFIG_GENERIC_FIND_NEXT_BIT=y # CONFIG_ARCH_NO_VIRT_TO_BUS is not set CONFIG_PPC=y @@ -49,12 +50,14 @@ CONFIG_OF=y # CONFIG_GENERIC_TBSYNC is not set CONFIG_AUDIT_ARCH=y CONFIG_GENERIC_BUG=y +CONFIG_DTC=y # CONFIG_DEFAULT_UIMAGE is not set CONFIG_REDBOOT=y # CONFIG_PPC_DCR_NATIVE is not set # CONFIG_PPC_DCR_MMIO is not set CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" +CONFIG_CONSTRUCTORS=y # # General setup @@ -101,7 +104,6 @@ CONFIG_EMBEDDED=y CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_ALL is not set # CONFIG_KALLSYMS_EXTRA_PASS is not set -# CONFIG_STRIP_ASM_SYMS is not set CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y @@ -114,8 +116,15 @@ CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y CONFIG_AIO=y +CONFIG_HAVE_PERF_COUNTERS=y + +# +# Performance Counters +# +# CONFIG_PERF_COUNTERS is not set # CONFIG_VM_EVENT_COUNTERS is not set CONFIG_SLUB_DEBUG=y +# CONFIG_STRIP_ASM_SYMS is not set CONFIG_COMPAT_BRK=y # CONFIG_SLAB is not set CONFIG_SLUB=y @@ -129,13 +138,18 @@ CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_ARCH_TRACEHOOK=y CONFIG_HAVE_CLK=y + +# +# GCOV-based kernel profiling +# +# CONFIG_GCOV_KERNEL is not set # CONFIG_SLOW_WORK is not set # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y CONFIG_BASE_SMALL=1 # CONFIG_MODULES is not set CONFIG_BLOCK=y -# CONFIG_LBD is not set +CONFIG_LBDAF=y # CONFIG_BLK_DEV_BSG is not set # CONFIG_BLK_DEV_INTEGRITY is not set @@ -220,6 +234,7 @@ CONFIG_BINFMT_ELF=y # CONFIG_MATH_EMULATION is not set # CONFIG_8XX_MINIMAL_FPEMU is not set # CONFIG_IOMMU_HELPER is not set +# CONFIG_SWIOTLB is not set CONFIG_PPC_NEED_DMA_SYNC_OPS=y CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y CONFIG_ARCH_HAS_WALK_MEMORY=y @@ -239,9 +254,9 @@ CONFIG_MIGRATION=y CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y -CONFIG_UNEVICTABLE_LRU=y CONFIG_HAVE_MLOCK=y CONFIG_HAVE_MLOCKED_PAGE_BIT=y +CONFIG_DEFAULT_MMAP_MIN_ADDR=4096 CONFIG_PPC_4K_PAGES=y # CONFIG_PPC_16K_PAGES is not set # CONFIG_PPC_64K_PAGES is not set @@ -280,6 +295,7 @@ CONFIG_PAGE_OFFSET=0xc0000000 CONFIG_KERNEL_START=0xc0000000 CONFIG_PHYSICAL_START=0x00000000 CONFIG_TASK_SIZE=0x80000000 +CONFIG_CONSISTENT_SIZE=0x00200000 CONFIG_NET=y # @@ -336,6 +352,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set # CONFIG_PHONET is not set +# CONFIG_IEEE802154 is not set # CONFIG_NET_SCHED is not set # CONFIG_DCB is not set @@ -353,7 +370,11 @@ CONFIG_WIRELESS=y CONFIG_WIRELESS_OLD_REGULATORY=y # CONFIG_WIRELESS_EXT is not set # CONFIG_LIB80211 is not set -# CONFIG_MAC80211 is not set + +# +# CFG80211 needs to be enabled for MAC80211 +# +CONFIG_MAC80211_DEFAULT_PS_VALUE=0 # CONFIG_WIMAX is not set # CONFIG_RFKILL is not set # CONFIG_NET_9P is not set @@ -452,6 +473,7 @@ CONFIG_MTD_PHYSMAP_OF=y # # CONFIG_MTD_UBI is not set CONFIG_OF_DEVICE=y +CONFIG_OF_MDIO=y # CONFIG_PARPORT is not set # CONFIG_BLK_DEV is not set # CONFIG_MISC_DEVICES is not set @@ -469,7 +491,6 @@ CONFIG_HAVE_IDE=y # CONFIG_MD is not set # CONFIG_MACINTOSH_DRIVERS is not set CONFIG_NETDEVICES=y -CONFIG_COMPAT_NET_DEV_OPS=y # CONFIG_DUMMY is not set # CONFIG_BONDING is not set # CONFIG_MACVLAN is not set @@ -508,6 +529,7 @@ CONFIG_MII=y # CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set # CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set # CONFIG_B44 is not set +# CONFIG_KS8842 is not set CONFIG_FS_ENET=y # CONFIG_FS_ENET_HAS_SCC is not set CONFIG_FS_ENET_HAS_FEC=y @@ -556,11 +578,11 @@ CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 # CONFIG_INPUT_KEYBOARD=y CONFIG_KEYBOARD_ATKBD=y -# CONFIG_KEYBOARD_SUNKBD is not set # CONFIG_KEYBOARD_LKKBD is not set -# CONFIG_KEYBOARD_XTKBD is not set # CONFIG_KEYBOARD_NEWTON is not set # CONFIG_KEYBOARD_STOWAWAY is not set +# CONFIG_KEYBOARD_SUNKBD is not set +# CONFIG_KEYBOARD_XTKBD is not set CONFIG_INPUT_MOUSE=y CONFIG_MOUSE_PS2=y CONFIG_MOUSE_PS2_ALPS=y @@ -622,6 +644,11 @@ CONFIG_GEN_RTC=y # CONFIG_TCG_TPM is not set # CONFIG_I2C is not set # CONFIG_SPI is not set + +# +# PPS support +# +# CONFIG_PPS is not set CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y # CONFIG_GPIOLIB is not set # CONFIG_W1 is not set @@ -644,22 +671,7 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_HTC_PASIC3 is not set # CONFIG_MFD_TMIO is not set # CONFIG_REGULATOR is not set - -# -# Multimedia devices -# - -# -# Multimedia core support -# -# CONFIG_VIDEO_DEV is not set -# CONFIG_DVB_CORE is not set -# CONFIG_VIDEO_MEDIA is not set - -# -# Multimedia drivers -# -CONFIG_DAB=y +# CONFIG_MEDIA_SUPPORT is not set # # Graphics support @@ -685,6 +697,10 @@ CONFIG_VIDEO_OUTPUT_CONTROL=y # CONFIG_DMADEVICES is not set # CONFIG_AUXDISPLAY is not set # CONFIG_UIO is not set + +# +# TI VLYNQ +# # CONFIG_STAGING is not set # @@ -696,12 +712,15 @@ CONFIG_VIDEO_OUTPUT_CONTROL=y # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set -CONFIG_FILE_LOCKING=y # CONFIG_XFS_FS is not set +# CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set # CONFIG_BTRFS_FS is not set +CONFIG_FILE_LOCKING=y +CONFIG_FSNOTIFY=y # CONFIG_DNOTIFY is not set # CONFIG_INOTIFY is not set +CONFIG_INOTIFY_USER=y # CONFIG_QUOTA is not set # CONFIG_AUTOFS_FS is not set # CONFIG_AUTOFS4_FS is not set @@ -818,6 +837,7 @@ CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y CONFIG_HAVE_LMB=y CONFIG_NLATTR=y +CONFIG_GENERIC_ATOMIC64=y # # Kernel hacking @@ -846,6 +866,9 @@ CONFIG_SCHED_DEBUG=y # CONFIG_SLUB_STATS is not set # CONFIG_DEBUG_SPINLOCK is not set # CONFIG_DEBUG_MUTEXES is not set +# CONFIG_DEBUG_LOCK_ALLOC is not set +# CONFIG_PROVE_LOCKING is not set +# CONFIG_LOCK_STAT is not set # CONFIG_DEBUG_SPINLOCK_SLEEP is not set # CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set # CONFIG_DEBUG_KOBJECT is not set @@ -857,7 +880,6 @@ CONFIG_DEBUG_INFO=y # CONFIG_DEBUG_LIST is not set # CONFIG_DEBUG_SG is not set # CONFIG_DEBUG_NOTIFIERS is not set -# CONFIG_BOOT_PRINTK_DELAY is not set # CONFIG_RCU_TORTURE_TEST is not set # CONFIG_RCU_CPU_STALL_DETECTOR is not set # CONFIG_BACKTRACE_SELF_TEST is not set @@ -870,16 +892,15 @@ CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y CONFIG_HAVE_DYNAMIC_FTRACE=y CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y CONFIG_TRACING_SUPPORT=y - -# -# Tracers -# +CONFIG_FTRACE=y # CONFIG_FUNCTION_TRACER is not set +# CONFIG_IRQSOFF_TRACER is not set # CONFIG_SCHED_TRACER is not set -# CONFIG_CONTEXT_SWITCH_TRACER is not set -# CONFIG_EVENT_TRACER is not set +# CONFIG_ENABLE_DEFAULT_TRACERS is not set # CONFIG_BOOT_TRACER is not set -# CONFIG_TRACE_BRANCH_PROFILING is not set +CONFIG_BRANCH_PROFILE_NONE=y +# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set +# CONFIG_PROFILE_ALL_BRANCHES is not set # CONFIG_STACK_TRACER is not set # CONFIG_KMEMTRACE is not set # CONFIG_WORKQUEUE_TRACER is not set @@ -888,9 +909,13 @@ CONFIG_TRACING_SUPPORT=y # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y # CONFIG_KGDB is not set +# CONFIG_KMEMCHECK is not set +# CONFIG_PPC_DISABLE_WERROR is not set +CONFIG_PPC_WERROR=y CONFIG_PRINT_STACK_DEPTH=64 # CONFIG_DEBUG_STACKOVERFLOW is not set # CONFIG_DEBUG_STACK_USAGE is not set +# CONFIG_PPC_EMULATED_STATS is not set # CONFIG_CODE_PATCHING_SELFTEST is not set # CONFIG_FTR_FIXUP_SELFTEST is not set # CONFIG_MSI_BITMAP_SELFTEST is not set diff --git a/arch/powerpc/configs/c2k_defconfig b/arch/powerpc/configs/c2k_defconfig index 9ffa8de9280..8105360d53f 100644 --- a/arch/powerpc/configs/c2k_defconfig +++ b/arch/powerpc/configs/c2k_defconfig @@ -1,25 +1,27 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.30-rc3 -# Wed May 13 17:21:51 2009 +# Linux kernel version: 2.6.31-rc4 +# Wed Jul 29 23:31:48 2009 # # CONFIG_PPC64 is not set # # Processor support # -CONFIG_6xx=y +CONFIG_PPC_BOOK3S_32=y # CONFIG_PPC_85xx is not set # CONFIG_PPC_8xx is not set # CONFIG_40x is not set # CONFIG_44x is not set # CONFIG_E200 is not set CONFIG_PPC_BOOK3S=y +CONFIG_6xx=y CONFIG_PPC_FPU=y # CONFIG_ALTIVEC is not set CONFIG_PPC_STD_MMU=y CONFIG_PPC_STD_MMU_32=y # CONFIG_PPC_MM_SLICES is not set +CONFIG_PPC_HAVE_PMU_SUPPORT=y # CONFIG_SMP is not set CONFIG_NOT_COHERENT_CACHE=y CONFIG_CHECK_CACHE_COHERENCY=y @@ -32,15 +34,16 @@ CONFIG_GENERIC_TIME=y CONFIG_GENERIC_TIME_VSYSCALL=y CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_GENERIC_HARDIRQS=y +CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set CONFIG_IRQ_PER_CPU=y CONFIG_STACKTRACE_SUPPORT=y CONFIG_HAVE_LATENCYTOP_SUPPORT=y +CONFIG_TRACE_IRQFLAGS_SUPPORT=y CONFIG_LOCKDEP_SUPPORT=y CONFIG_RWSEM_XCHGADD_ALGORITHM=y CONFIG_ARCH_HAS_ILOG2_U32=y CONFIG_GENERIC_HWEIGHT=y -CONFIG_GENERIC_CALIBRATE_DELAY=y CONFIG_GENERIC_FIND_NEXT_BIT=y # CONFIG_ARCH_NO_VIRT_TO_BUS is not set CONFIG_PPC=y @@ -54,11 +57,13 @@ CONFIG_OF=y # CONFIG_GENERIC_TBSYNC is not set CONFIG_AUDIT_ARCH=y CONFIG_GENERIC_BUG=y +CONFIG_DTC=y # CONFIG_DEFAULT_UIMAGE is not set # CONFIG_PPC_DCR_NATIVE is not set # CONFIG_PPC_DCR_MMIO is not set CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" +CONFIG_CONSTRUCTORS=y # # General setup @@ -118,7 +123,6 @@ CONFIG_SYSCTL_SYSCALL=y CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_ALL is not set CONFIG_KALLSYMS_EXTRA_PASS=y -# CONFIG_STRIP_ASM_SYMS is not set CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y @@ -131,16 +135,23 @@ CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y CONFIG_AIO=y +CONFIG_HAVE_PERF_COUNTERS=y + +# +# Performance Counters +# +# CONFIG_PERF_COUNTERS is not set CONFIG_VM_EVENT_COUNTERS=y CONFIG_PCI_QUIRKS=y CONFIG_SLUB_DEBUG=y +# CONFIG_STRIP_ASM_SYMS is not set CONFIG_COMPAT_BRK=y # CONFIG_SLAB is not set CONFIG_SLUB=y # CONFIG_SLOB is not set CONFIG_PROFILING=y CONFIG_TRACEPOINTS=y -# CONFIG_MARKERS is not set +CONFIG_MARKERS=y CONFIG_OPROFILE=m CONFIG_HAVE_OPROFILE=y CONFIG_KPROBES=y @@ -150,6 +161,11 @@ CONFIG_HAVE_IOREMAP_PROT=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_ARCH_TRACEHOOK=y + +# +# GCOV-based kernel profiling +# +# CONFIG_GCOV_KERNEL is not set # CONFIG_SLOW_WORK is not set # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y @@ -162,7 +178,7 @@ CONFIG_MODULE_UNLOAD=y CONFIG_MODVERSIONS=y # CONFIG_MODULE_SRCVERSION_ALL is not set CONFIG_BLOCK=y -CONFIG_LBD=y +CONFIG_LBDAF=y # CONFIG_BLK_DEV_BSG is not set # CONFIG_BLK_DEV_INTEGRITY is not set @@ -258,6 +274,7 @@ CONFIG_BINFMT_ELF=y # CONFIG_HAVE_AOUT is not set CONFIG_BINFMT_MISC=y # CONFIG_IOMMU_HELPER is not set +# CONFIG_SWIOTLB is not set CONFIG_PPC_NEED_DMA_SYNC_OPS=y CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y CONFIG_ARCH_HAS_WALK_MEMORY=y @@ -279,9 +296,9 @@ CONFIG_MIGRATION=y CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y -CONFIG_UNEVICTABLE_LRU=y CONFIG_HAVE_MLOCK=y CONFIG_HAVE_MLOCKED_PAGE_BIT=y +CONFIG_DEFAULT_MMAP_MIN_ADDR=4096 CONFIG_PPC_4K_PAGES=y # CONFIG_PPC_16K_PAGES is not set # CONFIG_PPC_64K_PAGES is not set @@ -331,6 +348,7 @@ CONFIG_PAGE_OFFSET=0xc0000000 CONFIG_KERNEL_START=0xc0000000 CONFIG_PHYSICAL_START=0x00000000 CONFIG_TASK_SIZE=0xc0000000 +CONFIG_CONSISTENT_SIZE=0x00200000 CONFIG_NET=y # @@ -583,6 +601,7 @@ CONFIG_LLC=m # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set # CONFIG_PHONET is not set +# CONFIG_IEEE802154 is not set CONFIG_NET_SCHED=y # @@ -663,7 +682,11 @@ CONFIG_WIRELESS_OLD_REGULATORY=y CONFIG_WIRELESS_EXT=y CONFIG_WIRELESS_EXT_SYSFS=y # CONFIG_LIB80211 is not set -# CONFIG_MAC80211 is not set + +# +# CFG80211 needs to be enabled for MAC80211 +# +CONFIG_MAC80211_DEFAULT_PS_VALUE=0 # CONFIG_WIMAX is not set # CONFIG_RFKILL is not set # CONFIG_NET_9P is not set @@ -772,6 +795,7 @@ CONFIG_MTD_PHYSMAP_OF=y # CONFIG_MTD_UBI is not set CONFIG_OF_DEVICE=y CONFIG_OF_I2C=m +CONFIG_OF_MDIO=y # CONFIG_PARPORT is not set CONFIG_BLK_DEV=y # CONFIG_BLK_DEV_FD is not set @@ -816,10 +840,6 @@ CONFIG_BLK_DEV_SR=m CONFIG_BLK_DEV_SR_VENDOR=y CONFIG_CHR_DEV_SG=m # CONFIG_CHR_DEV_SCH is not set - -# -# Some SCSI devices (e.g. CD jukebox) support multiple LUNs -# # CONFIG_SCSI_MULTI_LUN is not set CONFIG_SCSI_CONSTANTS=y CONFIG_SCSI_LOGGING=y @@ -836,6 +856,7 @@ CONFIG_SCSI_ISCSI_ATTRS=m CONFIG_SCSI_SRP_ATTRS=m CONFIG_SCSI_LOWLEVEL=y # CONFIG_ISCSI_TCP is not set +# CONFIG_SCSI_BNX2_ISCSI is not set CONFIG_BLK_DEV_3W_XXXX_RAID=m CONFIG_SCSI_3W_9XXX=m CONFIG_SCSI_ACARD=m @@ -854,6 +875,7 @@ CONFIG_AIC79XX_RESET_DELAY_MS=15000 CONFIG_AIC79XX_DEBUG_MASK=0 # CONFIG_AIC79XX_REG_PRETTY_PRINT is not set # CONFIG_SCSI_AIC94XX is not set +# CONFIG_SCSI_MVSAS is not set # CONFIG_SCSI_DPT_I2O is not set # CONFIG_SCSI_ADVANSYS is not set CONFIG_SCSI_ARCMSR=m @@ -875,7 +897,6 @@ CONFIG_SCSI_GDTH=m CONFIG_SCSI_IPS=m CONFIG_SCSI_INITIO=m # CONFIG_SCSI_INIA100 is not set -# CONFIG_SCSI_MVSAS is not set # CONFIG_SCSI_STEX is not set CONFIG_SCSI_SYM53C8XX_2=m CONFIG_SCSI_SYM53C8XX_DMA_ADDRESSING_MODE=1 @@ -903,14 +924,17 @@ CONFIG_SCSI_LPFC=m # # -# Enable only one of the two stacks, unless you know what you are doing +# You can enable one or both FireWire driver stacks. +# + +# +# See the help texts for more information. # # CONFIG_FIREWIRE is not set # CONFIG_IEEE1394 is not set # CONFIG_I2O is not set # CONFIG_MACINTOSH_DRIVERS is not set CONFIG_NETDEVICES=y -CONFIG_COMPAT_NET_DEV_OPS=y CONFIG_DUMMY=m CONFIG_BONDING=m # CONFIG_MACVLAN is not set @@ -957,6 +981,7 @@ CONFIG_MII=y # CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set # CONFIG_NET_PCI is not set # CONFIG_B44 is not set +# CONFIG_KS8842 is not set # CONFIG_ATL2 is not set CONFIG_NETDEV_1000=y # CONFIG_ACENIC is not set @@ -976,6 +1001,7 @@ CONFIG_NETDEV_1000=y # CONFIG_VIA_VELOCITY is not set # CONFIG_TIGON3 is not set # CONFIG_BNX2 is not set +# CONFIG_CNIC is not set CONFIG_MV643XX_ETH=y # CONFIG_QLA3XXX is not set # CONFIG_ATL1 is not set @@ -1177,13 +1203,17 @@ CONFIG_I2C_MV64XXX=m CONFIG_SENSORS_PCF8574=m # CONFIG_PCF8575 is not set # CONFIG_SENSORS_PCA9539 is not set -# CONFIG_SENSORS_MAX6875 is not set # CONFIG_SENSORS_TSL2550 is not set # CONFIG_I2C_DEBUG_CORE is not set # CONFIG_I2C_DEBUG_ALGO is not set # CONFIG_I2C_DEBUG_BUS is not set # CONFIG_I2C_DEBUG_CHIP is not set # CONFIG_SPI is not set + +# +# PPS support +# +# CONFIG_PPS is not set CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y # CONFIG_GPIOLIB is not set # CONFIG_W1 is not set @@ -1238,6 +1268,7 @@ CONFIG_SENSORS_SMSC47M1=m CONFIG_SENSORS_SMSC47B397=m # CONFIG_SENSORS_ADS7828 is not set # CONFIG_SENSORS_THMC50 is not set +# CONFIG_SENSORS_TMP401 is not set CONFIG_SENSORS_VIA686A=m # CONFIG_SENSORS_VT1211 is not set # CONFIG_SENSORS_VT8231 is not set @@ -1266,7 +1297,6 @@ CONFIG_SOFT_WATCHDOG=m # CONFIG_PCIPCWATCHDOG=m CONFIG_WDTPCI=m -CONFIG_WDT_501_PCI=y # # USB-based Watchdog Cards @@ -1289,23 +1319,9 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_MFD_WM8400 is not set # CONFIG_MFD_WM8350_I2C is not set # CONFIG_MFD_PCF50633 is not set +# CONFIG_AB3100_CORE is not set # CONFIG_REGULATOR is not set - -# -# Multimedia devices -# - -# -# Multimedia core support -# -# CONFIG_VIDEO_DEV is not set -# CONFIG_DVB_CORE is not set -# CONFIG_VIDEO_MEDIA is not set - -# -# Multimedia drivers -# -# CONFIG_DAB is not set +# CONFIG_MEDIA_SUPPORT is not set # # Graphics support @@ -1354,6 +1370,7 @@ CONFIG_USB_MON=m # USB Host Controller Drivers # # CONFIG_USB_C67X00_HCD is not set +# CONFIG_USB_XHCI_HCD is not set CONFIG_USB_EHCI_HCD=m CONFIG_USB_EHCI_ROOT_HUB_TT=y # CONFIG_USB_EHCI_TT_NEWSCHED is not set @@ -1362,9 +1379,9 @@ CONFIG_USB_EHCI_HCD_PPC_OF=y # CONFIG_USB_ISP116X_HCD is not set # CONFIG_USB_ISP1760_HCD is not set CONFIG_USB_OHCI_HCD=m -CONFIG_USB_OHCI_HCD_PPC_OF=y CONFIG_USB_OHCI_HCD_PPC_OF_BE=y # CONFIG_USB_OHCI_HCD_PPC_OF_LE is not set +CONFIG_USB_OHCI_HCD_PPC_OF=y CONFIG_USB_OHCI_HCD_PCI=y CONFIG_USB_OHCI_BIG_ENDIAN_DESC=y CONFIG_USB_OHCI_BIG_ENDIAN_MMIO=y @@ -1545,6 +1562,10 @@ CONFIG_DMADEVICES=y # # CONFIG_AUXDISPLAY is not set # CONFIG_UIO is not set + +# +# TI VLYNQ +# # CONFIG_STAGING is not set # @@ -1563,11 +1584,12 @@ CONFIG_FS_MBCACHE=m # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set CONFIG_FS_POSIX_ACL=y -CONFIG_FILE_LOCKING=y # CONFIG_XFS_FS is not set # CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set # CONFIG_BTRFS_FS is not set +CONFIG_FILE_LOCKING=y +CONFIG_FSNOTIFY=y CONFIG_DNOTIFY=y CONFIG_INOTIFY=y CONFIG_INOTIFY_USER=y @@ -1652,6 +1674,7 @@ CONFIG_NFS_FS=y CONFIG_NFS_V3=y CONFIG_NFS_V3_ACL=y CONFIG_NFS_V4=y +# CONFIG_NFS_V4_1 is not set CONFIG_ROOT_NFS=y # CONFIG_NFSD is not set CONFIG_LOCKD=y @@ -1764,6 +1787,7 @@ CONFIG_HAS_DMA=y CONFIG_CHECK_SIGNATURE=y CONFIG_HAVE_LMB=y CONFIG_NLATTR=y +CONFIG_GENERIC_ATOMIC64=y # # Kernel hacking @@ -1794,6 +1818,9 @@ CONFIG_SCHED_DEBUG=y # CONFIG_RT_MUTEX_TESTER is not set CONFIG_DEBUG_SPINLOCK=y # CONFIG_DEBUG_MUTEXES is not set +# CONFIG_DEBUG_LOCK_ALLOC is not set +# CONFIG_PROVE_LOCKING is not set +# CONFIG_LOCK_STAT is not set CONFIG_DEBUG_SPINLOCK_SLEEP=y # CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set CONFIG_STACKTRACE=y @@ -1807,7 +1834,6 @@ CONFIG_DEBUG_MEMORY_INIT=y # CONFIG_DEBUG_LIST is not set # CONFIG_DEBUG_SG is not set # CONFIG_DEBUG_NOTIFIERS is not set -# CONFIG_BOOT_PRINTK_DELAY is not set # CONFIG_RCU_TORTURE_TEST is not set # CONFIG_RCU_CPU_STALL_DETECTOR is not set # CONFIG_KPROBES_SANITY_TEST is not set @@ -1824,30 +1850,34 @@ CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y CONFIG_HAVE_DYNAMIC_FTRACE=y CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y CONFIG_RING_BUFFER=y +CONFIG_EVENT_TRACING=y +CONFIG_CONTEXT_SWITCH_TRACER=y CONFIG_TRACING=y CONFIG_TRACING_SUPPORT=y - -# -# Tracers -# +CONFIG_FTRACE=y # CONFIG_FUNCTION_TRACER is not set +# CONFIG_IRQSOFF_TRACER is not set # CONFIG_SCHED_TRACER is not set -# CONFIG_CONTEXT_SWITCH_TRACER is not set -# CONFIG_EVENT_TRACER is not set +# CONFIG_ENABLE_DEFAULT_TRACERS is not set # CONFIG_BOOT_TRACER is not set -# CONFIG_TRACE_BRANCH_PROFILING is not set +CONFIG_BRANCH_PROFILE_NONE=y +# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set +# CONFIG_PROFILE_ALL_BRANCHES is not set # CONFIG_STACK_TRACER is not set # CONFIG_KMEMTRACE is not set # CONFIG_WORKQUEUE_TRACER is not set # CONFIG_BLK_DEV_IO_TRACE is not set -# CONFIG_FTRACE_STARTUP_TEST is not set +# CONFIG_RING_BUFFER_BENCHMARK is not set # CONFIG_DYNAMIC_DEBUG is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y # CONFIG_KGDB is not set +# CONFIG_PPC_DISABLE_WERROR is not set +CONFIG_PPC_WERROR=y CONFIG_PRINT_STACK_DEPTH=64 CONFIG_DEBUG_STACKOVERFLOW=y CONFIG_DEBUG_STACK_USAGE=y +# CONFIG_PPC_EMULATED_STATS is not set # CONFIG_CODE_PATCHING_SELFTEST is not set # CONFIG_FTR_FIXUP_SELFTEST is not set # CONFIG_MSI_BITMAP_SELFTEST is not set @@ -1869,7 +1899,6 @@ CONFIG_SECURITY_NETWORK=y # CONFIG_SECURITY_NETWORK_XFRM is not set # CONFIG_SECURITY_PATH is not set # CONFIG_SECURITY_FILE_CAPABILITIES is not set -CONFIG_SECURITY_DEFAULT_MMAP_MIN_ADDR=0 CONFIG_SECURITY_SELINUX=y CONFIG_SECURITY_SELINUX_BOOTPARAM=y CONFIG_SECURITY_SELINUX_BOOTPARAM_VALUE=1 diff --git a/arch/powerpc/configs/ep8248e_defconfig b/arch/powerpc/configs/ep8248e_defconfig index 04915c3a43f..0aa5b43ffeb 100644 --- a/arch/powerpc/configs/ep8248e_defconfig +++ b/arch/powerpc/configs/ep8248e_defconfig @@ -1,25 +1,27 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.30-rc3 -# Wed May 13 17:21:52 2009 +# Linux kernel version: 2.6.31-rc4 +# Wed Jul 29 23:31:49 2009 # # CONFIG_PPC64 is not set # # Processor support # -CONFIG_6xx=y +CONFIG_PPC_BOOK3S_32=y # CONFIG_PPC_85xx is not set # CONFIG_PPC_8xx is not set # CONFIG_40x is not set # CONFIG_44x is not set # CONFIG_E200 is not set CONFIG_PPC_BOOK3S=y +CONFIG_6xx=y CONFIG_PPC_FPU=y # CONFIG_ALTIVEC is not set CONFIG_PPC_STD_MMU=y CONFIG_PPC_STD_MMU_32=y # CONFIG_PPC_MM_SLICES is not set +CONFIG_PPC_HAVE_PMU_SUPPORT=y # CONFIG_SMP is not set CONFIG_PPC32=y CONFIG_WORD_SIZE=32 @@ -30,15 +32,16 @@ CONFIG_GENERIC_TIME=y CONFIG_GENERIC_TIME_VSYSCALL=y CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_GENERIC_HARDIRQS=y +CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set CONFIG_IRQ_PER_CPU=y CONFIG_STACKTRACE_SUPPORT=y CONFIG_HAVE_LATENCYTOP_SUPPORT=y +CONFIG_TRACE_IRQFLAGS_SUPPORT=y CONFIG_LOCKDEP_SUPPORT=y CONFIG_RWSEM_XCHGADD_ALGORITHM=y CONFIG_ARCH_HAS_ILOG2_U32=y CONFIG_GENERIC_HWEIGHT=y -CONFIG_GENERIC_CALIBRATE_DELAY=y CONFIG_GENERIC_FIND_NEXT_BIT=y CONFIG_GENERIC_GPIO=y # CONFIG_ARCH_NO_VIRT_TO_BUS is not set @@ -53,11 +56,13 @@ CONFIG_OF=y # CONFIG_GENERIC_TBSYNC is not set CONFIG_AUDIT_ARCH=y CONFIG_GENERIC_BUG=y +CONFIG_DTC=y # CONFIG_DEFAULT_UIMAGE is not set # CONFIG_PPC_DCR_NATIVE is not set # CONFIG_PPC_DCR_MMIO is not set CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" +CONFIG_CONSTRUCTORS=y # # General setup @@ -99,7 +104,6 @@ CONFIG_SYSCTL_SYSCALL=y CONFIG_KALLSYMS=y CONFIG_KALLSYMS_ALL=y # CONFIG_KALLSYMS_EXTRA_PASS is not set -# CONFIG_STRIP_ASM_SYMS is not set CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y @@ -112,8 +116,15 @@ CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y CONFIG_AIO=y +CONFIG_HAVE_PERF_COUNTERS=y + +# +# Performance Counters +# +# CONFIG_PERF_COUNTERS is not set CONFIG_VM_EVENT_COUNTERS=y CONFIG_PCI_QUIRKS=y +# CONFIG_STRIP_ASM_SYMS is not set CONFIG_COMPAT_BRK=y CONFIG_SLAB=y # CONFIG_SLUB is not set @@ -127,6 +138,10 @@ CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_ARCH_TRACEHOOK=y CONFIG_HAVE_CLK=y + +# +# GCOV-based kernel profiling +# # CONFIG_SLOW_WORK is not set # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y @@ -134,7 +149,7 @@ CONFIG_RT_MUTEXES=y CONFIG_BASE_SMALL=0 # CONFIG_MODULES is not set CONFIG_BLOCK=y -# CONFIG_LBD is not set +CONFIG_LBDAF=y # CONFIG_BLK_DEV_INTEGRITY is not set # @@ -213,6 +228,7 @@ CONFIG_BINFMT_ELF=y # CONFIG_HAVE_AOUT is not set CONFIG_BINFMT_MISC=y # CONFIG_IOMMU_HELPER is not set +# CONFIG_SWIOTLB is not set CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y CONFIG_ARCH_HAS_WALK_MEMORY=y CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y @@ -228,9 +244,9 @@ CONFIG_MIGRATION=y CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y -CONFIG_UNEVICTABLE_LRU=y CONFIG_HAVE_MLOCK=y CONFIG_HAVE_MLOCKED_PAGE_BIT=y +CONFIG_DEFAULT_MMAP_MIN_ADDR=4096 CONFIG_PPC_4K_PAGES=y # CONFIG_PPC_16K_PAGES is not set # CONFIG_PPC_64K_PAGES is not set @@ -300,6 +316,7 @@ CONFIG_IP_PNP_BOOTP=y # CONFIG_NET_IPIP is not set # CONFIG_NET_IPGRE is not set # CONFIG_IP_MROUTE is not set +# CONFIG_ARPD is not set CONFIG_SYN_COOKIES=y # CONFIG_INET_AH is not set # CONFIG_INET_ESP is not set @@ -380,7 +397,11 @@ CONFIG_WIRELESS=y CONFIG_WIRELESS_OLD_REGULATORY=y # CONFIG_WIRELESS_EXT is not set # CONFIG_LIB80211 is not set -# CONFIG_MAC80211 is not set + +# +# CFG80211 needs to be enabled for MAC80211 +# +CONFIG_MAC80211_DEFAULT_PS_VALUE=0 # CONFIG_WIMAX is not set # CONFIG_RFKILL is not set @@ -485,6 +506,7 @@ CONFIG_MTD_PHYSMAP_OF=y # CONFIG_MTD_UBI is not set CONFIG_OF_DEVICE=y CONFIG_OF_GPIO=y +CONFIG_OF_MDIO=y # CONFIG_PARPORT is not set CONFIG_BLK_DEV=y # CONFIG_BLK_DEV_FD is not set @@ -520,13 +542,17 @@ CONFIG_HAVE_IDE=y # # -# A new alternative FireWire stack is available with EXPERIMENTAL=y +# You can enable one or both FireWire driver stacks. # + +# +# See the help texts for more information. +# +# CONFIG_FIREWIRE is not set # CONFIG_IEEE1394 is not set # CONFIG_I2O is not set # CONFIG_MACINTOSH_DRIVERS is not set CONFIG_NETDEVICES=y -CONFIG_COMPAT_NET_DEV_OPS=y # CONFIG_DUMMY is not set # CONFIG_BONDING is not set # CONFIG_EQUALIZER is not set @@ -573,6 +599,7 @@ CONFIG_MII=y # CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set # CONFIG_NET_PCI is not set # CONFIG_B44 is not set +# CONFIG_KS8842 is not set # CONFIG_ATL2 is not set CONFIG_FS_ENET=y # CONFIG_FS_ENET_HAS_SCC is not set @@ -594,8 +621,10 @@ CONFIG_NETDEV_1000=y # CONFIG_VIA_VELOCITY is not set # CONFIG_TIGON3 is not set # CONFIG_BNX2 is not set +# CONFIG_CNIC is not set # CONFIG_FSL_PQ_MDIO is not set # CONFIG_GIANFAR is not set +# CONFIG_MV643XX_ETH is not set # CONFIG_QLA3XXX is not set # CONFIG_ATL1 is not set # CONFIG_JME is not set @@ -685,6 +714,10 @@ CONFIG_HW_RANDOM=y CONFIG_DEVPORT=y # CONFIG_I2C is not set # CONFIG_SPI is not set + +# +# PPS support +# CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y CONFIG_ARCH_REQUIRE_GPIOLIB=y CONFIG_GPIOLIB=y @@ -728,22 +761,7 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_HTC_PASIC3 is not set # CONFIG_MFD_TMIO is not set # CONFIG_REGULATOR is not set - -# -# Multimedia devices -# - -# -# Multimedia core support -# -# CONFIG_VIDEO_DEV is not set -# CONFIG_DVB_CORE is not set -# CONFIG_VIDEO_MEDIA is not set - -# -# Multimedia drivers -# -CONFIG_DAB=y +# CONFIG_MEDIA_SUPPORT is not set # # Graphics support @@ -771,6 +789,10 @@ CONFIG_DAB=y # CONFIG_DMADEVICES is not set # CONFIG_AUXDISPLAY is not set # CONFIG_UIO is not set + +# +# TI VLYNQ +# # CONFIG_STAGING is not set # @@ -787,9 +809,10 @@ CONFIG_JBD=y # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set -CONFIG_FILE_LOCKING=y # CONFIG_XFS_FS is not set # CONFIG_OCFS2_FS is not set +CONFIG_FILE_LOCKING=y +CONFIG_FSNOTIFY=y CONFIG_DNOTIFY=y CONFIG_INOTIFY=y CONFIG_INOTIFY_USER=y @@ -935,6 +958,7 @@ CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y CONFIG_HAVE_LMB=y CONFIG_NLATTR=y +CONFIG_GENERIC_ATOMIC64=y # # Kernel hacking @@ -960,6 +984,9 @@ CONFIG_DEBUG_KERNEL=y # CONFIG_RT_MUTEX_TESTER is not set # CONFIG_DEBUG_SPINLOCK is not set # CONFIG_DEBUG_MUTEXES is not set +# CONFIG_DEBUG_LOCK_ALLOC is not set +# CONFIG_PROVE_LOCKING is not set +# CONFIG_LOCK_STAT is not set # CONFIG_DEBUG_SPINLOCK_SLEEP is not set # CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set # CONFIG_DEBUG_KOBJECT is not set @@ -971,7 +998,6 @@ CONFIG_DEBUG_INFO=y # CONFIG_DEBUG_LIST is not set # CONFIG_DEBUG_SG is not set # CONFIG_DEBUG_NOTIFIERS is not set -# CONFIG_BOOT_PRINTK_DELAY is not set # CONFIG_RCU_TORTURE_TEST is not set # CONFIG_RCU_CPU_STALL_DETECTOR is not set # CONFIG_BACKTRACE_SELF_TEST is not set @@ -985,22 +1011,23 @@ CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y CONFIG_HAVE_DYNAMIC_FTRACE=y CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y CONFIG_TRACING_SUPPORT=y - -# -# Tracers -# +CONFIG_FTRACE=y # CONFIG_FUNCTION_TRACER is not set +# CONFIG_IRQSOFF_TRACER is not set # CONFIG_SCHED_TRACER is not set -# CONFIG_CONTEXT_SWITCH_TRACER is not set -# CONFIG_EVENT_TRACER is not set +# CONFIG_ENABLE_DEFAULT_TRACERS is not set # CONFIG_BOOT_TRACER is not set -# CONFIG_TRACE_BRANCH_PROFILING is not set +CONFIG_BRANCH_PROFILE_NONE=y +# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set +# CONFIG_PROFILE_ALL_BRANCHES is not set # CONFIG_STACK_TRACER is not set # CONFIG_KMEMTRACE is not set # CONFIG_WORKQUEUE_TRACER is not set # CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y +# CONFIG_PPC_DISABLE_WERROR is not set +CONFIG_PPC_WERROR=y CONFIG_PRINT_STACK_DEPTH=64 # CONFIG_DEBUG_STACKOVERFLOW is not set # CONFIG_DEBUG_STACK_USAGE is not set diff --git a/arch/powerpc/configs/ep88xc_defconfig b/arch/powerpc/configs/ep88xc_defconfig index c2a439595f4..2c292e25cc0 100644 --- a/arch/powerpc/configs/ep88xc_defconfig +++ b/arch/powerpc/configs/ep88xc_defconfig @@ -1,14 +1,14 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.30-rc3 -# Wed May 13 17:21:53 2009 +# Linux kernel version: 2.6.31-rc4 +# Wed Jul 29 23:31:49 2009 # # CONFIG_PPC64 is not set # # Processor support # -# CONFIG_6xx is not set +# CONFIG_PPC_BOOK3S_32 is not set # CONFIG_PPC_85xx is not set CONFIG_PPC_8xx=y # CONFIG_40x is not set @@ -27,15 +27,16 @@ CONFIG_GENERIC_TIME=y CONFIG_GENERIC_TIME_VSYSCALL=y CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_GENERIC_HARDIRQS=y +CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set CONFIG_IRQ_PER_CPU=y CONFIG_STACKTRACE_SUPPORT=y CONFIG_HAVE_LATENCYTOP_SUPPORT=y +CONFIG_TRACE_IRQFLAGS_SUPPORT=y CONFIG_LOCKDEP_SUPPORT=y CONFIG_RWSEM_XCHGADD_ALGORITHM=y CONFIG_ARCH_HAS_ILOG2_U32=y CONFIG_GENERIC_HWEIGHT=y -CONFIG_GENERIC_CALIBRATE_DELAY=y CONFIG_GENERIC_FIND_NEXT_BIT=y # CONFIG_ARCH_NO_VIRT_TO_BUS is not set CONFIG_PPC=y @@ -49,11 +50,13 @@ CONFIG_OF=y # CONFIG_GENERIC_TBSYNC is not set CONFIG_AUDIT_ARCH=y CONFIG_GENERIC_BUG=y +CONFIG_DTC=y # CONFIG_DEFAULT_UIMAGE is not set # CONFIG_PPC_DCR_NATIVE is not set # CONFIG_PPC_DCR_MMIO is not set CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" +CONFIG_CONSTRUCTORS=y # # General setup @@ -100,7 +103,6 @@ CONFIG_EMBEDDED=y CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_ALL is not set # CONFIG_KALLSYMS_EXTRA_PASS is not set -# CONFIG_STRIP_ASM_SYMS is not set CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y @@ -113,8 +115,15 @@ CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y CONFIG_AIO=y +CONFIG_HAVE_PERF_COUNTERS=y + +# +# Performance Counters +# +# CONFIG_PERF_COUNTERS is not set # CONFIG_VM_EVENT_COUNTERS is not set CONFIG_SLUB_DEBUG=y +# CONFIG_STRIP_ASM_SYMS is not set CONFIG_COMPAT_BRK=y # CONFIG_SLAB is not set CONFIG_SLUB=y @@ -128,13 +137,17 @@ CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_ARCH_TRACEHOOK=y CONFIG_HAVE_CLK=y + +# +# GCOV-based kernel profiling +# # CONFIG_SLOW_WORK is not set # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y CONFIG_BASE_SMALL=1 # CONFIG_MODULES is not set CONFIG_BLOCK=y -# CONFIG_LBD is not set +CONFIG_LBDAF=y # CONFIG_BLK_DEV_BSG is not set # CONFIG_BLK_DEV_INTEGRITY is not set @@ -220,6 +233,7 @@ CONFIG_BINFMT_ELF=y # CONFIG_MATH_EMULATION is not set CONFIG_8XX_MINIMAL_FPEMU=y # CONFIG_IOMMU_HELPER is not set +# CONFIG_SWIOTLB is not set CONFIG_PPC_NEED_DMA_SYNC_OPS=y CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y CONFIG_ARCH_HAS_WALK_MEMORY=y @@ -239,9 +253,9 @@ CONFIG_MIGRATION=y CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y -CONFIG_UNEVICTABLE_LRU=y CONFIG_HAVE_MLOCK=y CONFIG_HAVE_MLOCKED_PAGE_BIT=y +CONFIG_DEFAULT_MMAP_MIN_ADDR=4096 CONFIG_PPC_4K_PAGES=y # CONFIG_PPC_16K_PAGES is not set # CONFIG_PPC_64K_PAGES is not set @@ -280,6 +294,7 @@ CONFIG_PAGE_OFFSET=0xc0000000 CONFIG_KERNEL_START=0xc0000000 CONFIG_PHYSICAL_START=0x00000000 CONFIG_TASK_SIZE=0x80000000 +CONFIG_CONSISTENT_SIZE=0x00200000 CONFIG_NET=y # @@ -336,6 +351,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set # CONFIG_PHONET is not set +# CONFIG_IEEE802154 is not set # CONFIG_NET_SCHED is not set # CONFIG_DCB is not set @@ -353,7 +369,11 @@ CONFIG_WIRELESS=y CONFIG_WIRELESS_OLD_REGULATORY=y # CONFIG_WIRELESS_EXT is not set # CONFIG_LIB80211 is not set -# CONFIG_MAC80211 is not set + +# +# CFG80211 needs to be enabled for MAC80211 +# +CONFIG_MAC80211_DEFAULT_PS_VALUE=0 # CONFIG_WIMAX is not set # CONFIG_RFKILL is not set # CONFIG_NET_9P is not set @@ -452,6 +472,7 @@ CONFIG_MTD_PHYSMAP_OF=y # # CONFIG_MTD_UBI is not set CONFIG_OF_DEVICE=y +CONFIG_OF_MDIO=y # CONFIG_PARPORT is not set # CONFIG_BLK_DEV is not set # CONFIG_MISC_DEVICES is not set @@ -469,7 +490,6 @@ CONFIG_HAVE_IDE=y # CONFIG_MD is not set # CONFIG_MACINTOSH_DRIVERS is not set CONFIG_NETDEVICES=y -CONFIG_COMPAT_NET_DEV_OPS=y # CONFIG_DUMMY is not set # CONFIG_BONDING is not set # CONFIG_MACVLAN is not set @@ -508,6 +528,7 @@ CONFIG_MII=y # CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set # CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set # CONFIG_B44 is not set +# CONFIG_KS8842 is not set CONFIG_FS_ENET=y # CONFIG_FS_ENET_HAS_SCC is not set CONFIG_FS_ENET_HAS_FEC=y @@ -579,6 +600,11 @@ CONFIG_GEN_RTC=y # CONFIG_TCG_TPM is not set # CONFIG_I2C is not set # CONFIG_SPI is not set + +# +# PPS support +# +# CONFIG_PPS is not set CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y # CONFIG_GPIOLIB is not set # CONFIG_W1 is not set @@ -602,22 +628,7 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_HTC_PASIC3 is not set # CONFIG_MFD_TMIO is not set # CONFIG_REGULATOR is not set - -# -# Multimedia devices -# - -# -# Multimedia core support -# -# CONFIG_VIDEO_DEV is not set -# CONFIG_DVB_CORE is not set -# CONFIG_VIDEO_MEDIA is not set - -# -# Multimedia drivers -# -CONFIG_DAB=y +# CONFIG_MEDIA_SUPPORT is not set # # Graphics support @@ -642,6 +653,10 @@ CONFIG_DAB=y # CONFIG_DMADEVICES is not set # CONFIG_AUXDISPLAY is not set # CONFIG_UIO is not set + +# +# TI VLYNQ +# # CONFIG_STAGING is not set # @@ -653,12 +668,15 @@ CONFIG_DAB=y # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set -CONFIG_FILE_LOCKING=y # CONFIG_XFS_FS is not set +# CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set # CONFIG_BTRFS_FS is not set +CONFIG_FILE_LOCKING=y +CONFIG_FSNOTIFY=y # CONFIG_DNOTIFY is not set # CONFIG_INOTIFY is not set +CONFIG_INOTIFY_USER=y # CONFIG_QUOTA is not set # CONFIG_AUTOFS_FS is not set # CONFIG_AUTOFS4_FS is not set @@ -775,6 +793,7 @@ CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y CONFIG_HAVE_LMB=y CONFIG_NLATTR=y +CONFIG_GENERIC_ATOMIC64=y # # Kernel hacking @@ -803,6 +822,9 @@ CONFIG_SCHED_DEBUG=y # CONFIG_SLUB_STATS is not set # CONFIG_DEBUG_SPINLOCK is not set # CONFIG_DEBUG_MUTEXES is not set +# CONFIG_DEBUG_LOCK_ALLOC is not set +# CONFIG_PROVE_LOCKING is not set +# CONFIG_LOCK_STAT is not set # CONFIG_DEBUG_SPINLOCK_SLEEP is not set # CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set # CONFIG_DEBUG_KOBJECT is not set @@ -814,7 +836,6 @@ CONFIG_DEBUG_INFO=y # CONFIG_DEBUG_LIST is not set # CONFIG_DEBUG_SG is not set # CONFIG_DEBUG_NOTIFIERS is not set -# CONFIG_BOOT_PRINTK_DELAY is not set # CONFIG_RCU_TORTURE_TEST is not set # CONFIG_RCU_CPU_STALL_DETECTOR is not set # CONFIG_BACKTRACE_SELF_TEST is not set @@ -827,16 +848,15 @@ CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y CONFIG_HAVE_DYNAMIC_FTRACE=y CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y CONFIG_TRACING_SUPPORT=y - -# -# Tracers -# +CONFIG_FTRACE=y # CONFIG_FUNCTION_TRACER is not set +# CONFIG_IRQSOFF_TRACER is not set # CONFIG_SCHED_TRACER is not set -# CONFIG_CONTEXT_SWITCH_TRACER is not set -# CONFIG_EVENT_TRACER is not set +# CONFIG_ENABLE_DEFAULT_TRACERS is not set # CONFIG_BOOT_TRACER is not set -# CONFIG_TRACE_BRANCH_PROFILING is not set +CONFIG_BRANCH_PROFILE_NONE=y +# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set +# CONFIG_PROFILE_ALL_BRANCHES is not set # CONFIG_STACK_TRACER is not set # CONFIG_KMEMTRACE is not set # CONFIG_WORKQUEUE_TRACER is not set @@ -844,6 +864,9 @@ CONFIG_TRACING_SUPPORT=y # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y # CONFIG_KGDB is not set +# CONFIG_KMEMCHECK is not set +# CONFIG_PPC_DISABLE_WERROR is not set +CONFIG_PPC_WERROR=y CONFIG_PRINT_STACK_DEPTH=64 # CONFIG_DEBUG_STACKOVERFLOW is not set # CONFIG_DEBUG_STACK_USAGE is not set diff --git a/arch/powerpc/configs/linkstation_defconfig b/arch/powerpc/configs/linkstation_defconfig index a4053ab9e24..45671e7dd2c 100644 --- a/arch/powerpc/configs/linkstation_defconfig +++ b/arch/powerpc/configs/linkstation_defconfig @@ -1,25 +1,27 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.30-rc3 -# Wed May 13 17:21:54 2009 +# Linux kernel version: 2.6.31-rc4 +# Wed Jul 29 23:31:50 2009 # # CONFIG_PPC64 is not set # # Processor support # -CONFIG_6xx=y +CONFIG_PPC_BOOK3S_32=y # CONFIG_PPC_85xx is not set # CONFIG_PPC_8xx is not set # CONFIG_40x is not set # CONFIG_44x is not set # CONFIG_E200 is not set CONFIG_PPC_BOOK3S=y +CONFIG_6xx=y CONFIG_PPC_FPU=y # CONFIG_ALTIVEC is not set CONFIG_PPC_STD_MMU=y CONFIG_PPC_STD_MMU_32=y # CONFIG_PPC_MM_SLICES is not set +CONFIG_PPC_HAVE_PMU_SUPPORT=y # CONFIG_SMP is not set CONFIG_PPC32=y CONFIG_WORD_SIZE=32 @@ -30,15 +32,16 @@ CONFIG_GENERIC_TIME=y CONFIG_GENERIC_TIME_VSYSCALL=y CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_GENERIC_HARDIRQS=y +CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set CONFIG_IRQ_PER_CPU=y CONFIG_STACKTRACE_SUPPORT=y CONFIG_HAVE_LATENCYTOP_SUPPORT=y +CONFIG_TRACE_IRQFLAGS_SUPPORT=y CONFIG_LOCKDEP_SUPPORT=y CONFIG_RWSEM_XCHGADD_ALGORITHM=y CONFIG_ARCH_HAS_ILOG2_U32=y CONFIG_GENERIC_HWEIGHT=y -CONFIG_GENERIC_CALIBRATE_DELAY=y CONFIG_GENERIC_FIND_NEXT_BIT=y # CONFIG_ARCH_NO_VIRT_TO_BUS is not set CONFIG_PPC=y @@ -52,11 +55,13 @@ CONFIG_PPC_UDBG_16550=y # CONFIG_GENERIC_TBSYNC is not set CONFIG_AUDIT_ARCH=y CONFIG_GENERIC_BUG=y +CONFIG_DTC=y CONFIG_DEFAULT_UIMAGE=y # CONFIG_PPC_DCR_NATIVE is not set # CONFIG_PPC_DCR_MMIO is not set CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" +CONFIG_CONSTRUCTORS=y # # General setup @@ -114,7 +119,6 @@ CONFIG_SYSCTL_SYSCALL=y CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_ALL is not set # CONFIG_KALLSYMS_EXTRA_PASS is not set -# CONFIG_STRIP_ASM_SYMS is not set CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y @@ -127,9 +131,16 @@ CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y CONFIG_AIO=y +CONFIG_HAVE_PERF_COUNTERS=y + +# +# Performance Counters +# +# CONFIG_PERF_COUNTERS is not set CONFIG_VM_EVENT_COUNTERS=y CONFIG_PCI_QUIRKS=y CONFIG_SLUB_DEBUG=y +# CONFIG_STRIP_ASM_SYMS is not set # CONFIG_COMPAT_BRK is not set # CONFIG_SLAB is not set CONFIG_SLUB=y @@ -143,6 +154,10 @@ CONFIG_HAVE_IOREMAP_PROT=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_ARCH_TRACEHOOK=y + +# +# GCOV-based kernel profiling +# # CONFIG_SLOW_WORK is not set # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y @@ -155,7 +170,7 @@ CONFIG_MODULE_UNLOAD=y # CONFIG_MODVERSIONS is not set # CONFIG_MODULE_SRCVERSION_ALL is not set CONFIG_BLOCK=y -# CONFIG_LBD is not set +CONFIG_LBDAF=y # CONFIG_BLK_DEV_BSG is not set # CONFIG_BLK_DEV_INTEGRITY is not set @@ -237,6 +252,7 @@ CONFIG_BINFMT_ELF=y # CONFIG_HAVE_AOUT is not set # CONFIG_BINFMT_MISC is not set # CONFIG_IOMMU_HELPER is not set +# CONFIG_SWIOTLB is not set CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y CONFIG_ARCH_HAS_WALK_MEMORY=y CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y @@ -257,9 +273,9 @@ CONFIG_MIGRATION=y CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y -CONFIG_UNEVICTABLE_LRU=y CONFIG_HAVE_MLOCK=y CONFIG_HAVE_MLOCKED_PAGE_BIT=y +CONFIG_DEFAULT_MMAP_MIN_ADDR=4096 CONFIG_PPC_4K_PAGES=y # CONFIG_PPC_16K_PAGES is not set # CONFIG_PPC_64K_PAGES is not set @@ -480,6 +496,7 @@ CONFIG_IP_NF_ARP_MANGLE=m # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set # CONFIG_PHONET is not set +# CONFIG_IEEE802154 is not set # CONFIG_NET_SCHED is not set # CONFIG_DCB is not set @@ -498,7 +515,11 @@ CONFIG_WIRELESS_OLD_REGULATORY=y CONFIG_WIRELESS_EXT=y CONFIG_WIRELESS_EXT_SYSFS=y # CONFIG_LIB80211 is not set -# CONFIG_MAC80211 is not set + +# +# CFG80211 needs to be enabled for MAC80211 +# +CONFIG_MAC80211_DEFAULT_PS_VALUE=0 # CONFIG_WIMAX is not set # CONFIG_RFKILL is not set # CONFIG_NET_9P is not set @@ -647,7 +668,9 @@ CONFIG_MISC_DEVICES=y # # CONFIG_EEPROM_AT24 is not set CONFIG_EEPROM_LEGACY=m +# CONFIG_EEPROM_MAX6875 is not set # CONFIG_EEPROM_93CX6 is not set +# CONFIG_CB710_CORE is not set CONFIG_HAVE_IDE=y # CONFIG_IDE is not set @@ -670,10 +693,6 @@ CONFIG_BLK_DEV_SD=y # CONFIG_BLK_DEV_SR is not set CONFIG_CHR_DEV_SG=y # CONFIG_CHR_DEV_SCH is not set - -# -# Some SCSI devices (e.g. CD jukebox) support multiple LUNs -# CONFIG_SCSI_MULTI_LUN=y # CONFIG_SCSI_CONSTANTS is not set # CONFIG_SCSI_LOGGING is not set @@ -691,6 +710,7 @@ CONFIG_SCSI_WAIT_SCAN=m CONFIG_SCSI_LOWLEVEL=y # CONFIG_ISCSI_TCP is not set # CONFIG_SCSI_CXGB3_ISCSI is not set +# CONFIG_SCSI_BNX2_ISCSI is not set # CONFIG_BLK_DEV_3W_XXXX_RAID is not set # CONFIG_SCSI_3W_9XXX is not set # CONFIG_SCSI_ACARD is not set @@ -699,6 +719,7 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_SCSI_AIC7XXX_OLD is not set # CONFIG_SCSI_AIC79XX is not set # CONFIG_SCSI_AIC94XX is not set +# CONFIG_SCSI_MVSAS is not set # CONFIG_SCSI_DPT_I2O is not set # CONFIG_SCSI_ADVANSYS is not set # CONFIG_SCSI_ARCMSR is not set @@ -718,7 +739,6 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_SCSI_IPS is not set # CONFIG_SCSI_INITIO is not set # CONFIG_SCSI_INIA100 is not set -# CONFIG_SCSI_MVSAS is not set # CONFIG_SCSI_STEX is not set # CONFIG_SCSI_SYM53C8XX_2 is not set # CONFIG_SCSI_IPR is not set @@ -802,14 +822,17 @@ CONFIG_PATA_SIL680=y # # -# Enable only one of the two stacks, unless you know what you are doing +# You can enable one or both FireWire driver stacks. +# + +# +# See the help texts for more information. # # CONFIG_FIREWIRE is not set # CONFIG_IEEE1394 is not set # CONFIG_I2O is not set # CONFIG_MACINTOSH_DRIVERS is not set CONFIG_NETDEVICES=y -CONFIG_COMPAT_NET_DEV_OPS=y # CONFIG_DUMMY is not set # CONFIG_BONDING is not set # CONFIG_MACVLAN is not set @@ -846,6 +869,7 @@ CONFIG_TULIP_MMIO=y # CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set # CONFIG_NET_PCI is not set # CONFIG_B44 is not set +# CONFIG_KS8842 is not set # CONFIG_ATL2 is not set CONFIG_NETDEV_1000=y # CONFIG_ACENIC is not set @@ -865,8 +889,10 @@ CONFIG_R8169=y # CONFIG_VIA_VELOCITY is not set # CONFIG_TIGON3 is not set # CONFIG_BNX2 is not set +# CONFIG_CNIC is not set # CONFIG_FSL_PQ_MDIO is not set # CONFIG_GIANFAR is not set +# CONFIG_MV643XX_ETH is not set # CONFIG_QLA3XXX is not set # CONFIG_ATL1 is not set # CONFIG_ATL1E is not set @@ -1074,13 +1100,17 @@ CONFIG_I2C_MPC=y # CONFIG_SENSORS_PCF8574 is not set # CONFIG_PCF8575 is not set # CONFIG_SENSORS_PCA9539 is not set -# CONFIG_SENSORS_MAX6875 is not set # CONFIG_SENSORS_TSL2550 is not set # CONFIG_I2C_DEBUG_CORE is not set # CONFIG_I2C_DEBUG_ALGO is not set # CONFIG_I2C_DEBUG_BUS is not set # CONFIG_I2C_DEBUG_CHIP is not set # CONFIG_SPI is not set + +# +# PPS support +# +# CONFIG_PPS is not set CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y # CONFIG_GPIOLIB is not set # CONFIG_W1 is not set @@ -1135,6 +1165,7 @@ CONFIG_HWMON=y # CONFIG_SENSORS_SMSC47B397 is not set # CONFIG_SENSORS_ADS7828 is not set # CONFIG_SENSORS_THMC50 is not set +# CONFIG_SENSORS_TMP401 is not set # CONFIG_SENSORS_VIA686A is not set # CONFIG_SENSORS_VT1211 is not set # CONFIG_SENSORS_VT8231 is not set @@ -1169,23 +1200,9 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_MFD_WM8400 is not set # CONFIG_MFD_WM8350_I2C is not set # CONFIG_MFD_PCF50633 is not set +# CONFIG_AB3100_CORE is not set # CONFIG_REGULATOR is not set - -# -# Multimedia devices -# - -# -# Multimedia core support -# -# CONFIG_VIDEO_DEV is not set -# CONFIG_DVB_CORE is not set -# CONFIG_VIDEO_MEDIA is not set - -# -# Multimedia drivers -# -# CONFIG_DAB is not set +# CONFIG_MEDIA_SUPPORT is not set # # Graphics support @@ -1245,6 +1262,7 @@ CONFIG_USB_MON=y # USB Host Controller Drivers # # CONFIG_USB_C67X00_HCD is not set +# CONFIG_USB_XHCI_HCD is not set CONFIG_USB_EHCI_HCD=y # CONFIG_USB_EHCI_ROOT_HUB_TT is not set # CONFIG_USB_EHCI_TT_NEWSCHED is not set @@ -1254,9 +1272,9 @@ CONFIG_USB_EHCI_HCD_PPC_OF=y # CONFIG_USB_ISP116X_HCD is not set # CONFIG_USB_ISP1760_HCD is not set CONFIG_USB_OHCI_HCD=y -CONFIG_USB_OHCI_HCD_PPC_OF=y CONFIG_USB_OHCI_HCD_PPC_OF_BE=y # CONFIG_USB_OHCI_HCD_PPC_OF_LE is not set +CONFIG_USB_OHCI_HCD_PPC_OF=y CONFIG_USB_OHCI_HCD_PCI=y CONFIG_USB_OHCI_BIG_ENDIAN_DESC=y CONFIG_USB_OHCI_BIG_ENDIAN_MMIO=y @@ -1423,6 +1441,7 @@ CONFIG_RTC_DRV_RS5C372=y # CONFIG_RTC_DRV_S35390A is not set # CONFIG_RTC_DRV_FM3130 is not set # CONFIG_RTC_DRV_RX8581 is not set +# CONFIG_RTC_DRV_RX8025 is not set # # SPI RTC drivers @@ -1450,6 +1469,10 @@ CONFIG_RTC_DRV_RS5C372=y # CONFIG_DMADEVICES is not set # CONFIG_AUXDISPLAY is not set # CONFIG_UIO is not set + +# +# TI VLYNQ +# # CONFIG_STAGING is not set # @@ -1469,14 +1492,16 @@ CONFIG_FS_MBCACHE=y # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set CONFIG_FS_POSIX_ACL=y -CONFIG_FILE_LOCKING=y CONFIG_XFS_FS=m # CONFIG_XFS_QUOTA is not set # CONFIG_XFS_POSIX_ACL is not set # CONFIG_XFS_RT is not set # CONFIG_XFS_DEBUG is not set +# CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set # CONFIG_BTRFS_FS is not set +CONFIG_FILE_LOCKING=y +CONFIG_FSNOTIFY=y CONFIG_DNOTIFY=y CONFIG_INOTIFY=y CONFIG_INOTIFY_USER=y @@ -1548,6 +1573,7 @@ CONFIG_NFS_FS=y CONFIG_NFS_V3=y CONFIG_NFS_V3_ACL=y CONFIG_NFS_V4=y +# CONFIG_NFS_V4_1 is not set CONFIG_ROOT_NFS=y CONFIG_NFSD=m CONFIG_NFSD_V3=y @@ -1578,7 +1604,7 @@ CONFIG_CIFS=m # # CONFIG_PARTITION_ADVANCED is not set CONFIG_MSDOS_PARTITION=y -CONFIG_NLS=m +CONFIG_NLS=y CONFIG_NLS_DEFAULT="iso8859-1" CONFIG_NLS_CODEPAGE_437=m # CONFIG_NLS_CODEPAGE_737 is not set @@ -1645,6 +1671,7 @@ CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y CONFIG_HAVE_LMB=y CONFIG_NLATTR=y +CONFIG_GENERIC_ATOMIC64=y # # Kernel hacking @@ -1675,6 +1702,9 @@ CONFIG_SCHED_DEBUG=y # CONFIG_RT_MUTEX_TESTER is not set # CONFIG_DEBUG_SPINLOCK is not set # CONFIG_DEBUG_MUTEXES is not set +# CONFIG_DEBUG_LOCK_ALLOC is not set +# CONFIG_PROVE_LOCKING is not set +# CONFIG_LOCK_STAT is not set # CONFIG_DEBUG_SPINLOCK_SLEEP is not set # CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set # CONFIG_DEBUG_KOBJECT is not set @@ -1686,7 +1716,6 @@ CONFIG_DEBUG_MEMORY_INIT=y # CONFIG_DEBUG_LIST is not set # CONFIG_DEBUG_SG is not set # CONFIG_DEBUG_NOTIFIERS is not set -# CONFIG_BOOT_PRINTK_DELAY is not set # CONFIG_RCU_TORTURE_TEST is not set # CONFIG_RCU_CPU_STALL_DETECTOR is not set # CONFIG_BACKTRACE_SELF_TEST is not set @@ -1700,16 +1729,15 @@ CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y CONFIG_HAVE_DYNAMIC_FTRACE=y CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y CONFIG_TRACING_SUPPORT=y - -# -# Tracers -# +CONFIG_FTRACE=y # CONFIG_FUNCTION_TRACER is not set +# CONFIG_IRQSOFF_TRACER is not set # CONFIG_SCHED_TRACER is not set -# CONFIG_CONTEXT_SWITCH_TRACER is not set -# CONFIG_EVENT_TRACER is not set +# CONFIG_ENABLE_DEFAULT_TRACERS is not set # CONFIG_BOOT_TRACER is not set -# CONFIG_TRACE_BRANCH_PROFILING is not set +CONFIG_BRANCH_PROFILE_NONE=y +# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set +# CONFIG_PROFILE_ALL_BRANCHES is not set # CONFIG_STACK_TRACER is not set # CONFIG_KMEMTRACE is not set # CONFIG_WORKQUEUE_TRACER is not set @@ -1717,6 +1745,8 @@ CONFIG_TRACING_SUPPORT=y # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y # CONFIG_KGDB is not set +# CONFIG_PPC_DISABLE_WERROR is not set +CONFIG_PPC_WERROR=y CONFIG_PRINT_STACK_DEPTH=64 # CONFIG_DEBUG_STACKOVERFLOW is not set # CONFIG_DEBUG_STACK_USAGE is not set diff --git a/arch/powerpc/configs/mgcoge_defconfig b/arch/powerpc/configs/mgcoge_defconfig index 31e1df66515..e9491c1c3f3 100644 --- a/arch/powerpc/configs/mgcoge_defconfig +++ b/arch/powerpc/configs/mgcoge_defconfig @@ -1,25 +1,27 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.30-rc3 -# Wed May 13 17:21:55 2009 +# Linux kernel version: 2.6.31-rc4 +# Wed Jul 29 23:31:51 2009 # # CONFIG_PPC64 is not set # # Processor support # -CONFIG_6xx=y +CONFIG_PPC_BOOK3S_32=y # CONFIG_PPC_85xx is not set # CONFIG_PPC_8xx is not set # CONFIG_40x is not set # CONFIG_44x is not set # CONFIG_E200 is not set CONFIG_PPC_BOOK3S=y +CONFIG_6xx=y CONFIG_PPC_FPU=y # CONFIG_ALTIVEC is not set CONFIG_PPC_STD_MMU=y CONFIG_PPC_STD_MMU_32=y # CONFIG_PPC_MM_SLICES is not set +CONFIG_PPC_HAVE_PMU_SUPPORT=y # CONFIG_SMP is not set CONFIG_PPC32=y CONFIG_WORD_SIZE=32 @@ -30,15 +32,16 @@ CONFIG_GENERIC_TIME=y CONFIG_GENERIC_TIME_VSYSCALL=y CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_GENERIC_HARDIRQS=y +CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set CONFIG_IRQ_PER_CPU=y CONFIG_STACKTRACE_SUPPORT=y CONFIG_HAVE_LATENCYTOP_SUPPORT=y +CONFIG_TRACE_IRQFLAGS_SUPPORT=y CONFIG_LOCKDEP_SUPPORT=y CONFIG_RWSEM_XCHGADD_ALGORITHM=y CONFIG_ARCH_HAS_ILOG2_U32=y CONFIG_GENERIC_HWEIGHT=y -CONFIG_GENERIC_CALIBRATE_DELAY=y CONFIG_GENERIC_FIND_NEXT_BIT=y CONFIG_GENERIC_GPIO=y # CONFIG_ARCH_NO_VIRT_TO_BUS is not set @@ -53,6 +56,7 @@ CONFIG_PPC_UDBG_16550=y # CONFIG_GENERIC_TBSYNC is not set CONFIG_AUDIT_ARCH=y CONFIG_GENERIC_BUG=y +CONFIG_DTC=y # CONFIG_DEFAULT_UIMAGE is not set CONFIG_HIBERNATE_32=y CONFIG_ARCH_HIBERNATION_POSSIBLE=y @@ -60,6 +64,7 @@ CONFIG_ARCH_HIBERNATION_POSSIBLE=y # CONFIG_PPC_DCR_MMIO is not set CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" +CONFIG_CONSTRUCTORS=y # # General setup @@ -105,7 +110,6 @@ CONFIG_SYSCTL_SYSCALL=y CONFIG_KALLSYMS=y CONFIG_KALLSYMS_ALL=y # CONFIG_KALLSYMS_EXTRA_PASS is not set -# CONFIG_STRIP_ASM_SYMS is not set CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y @@ -119,8 +123,15 @@ CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y CONFIG_AIO=y +CONFIG_HAVE_PERF_COUNTERS=y + +# +# Performance Counters +# +# CONFIG_PERF_COUNTERS is not set CONFIG_VM_EVENT_COUNTERS=y CONFIG_PCI_QUIRKS=y +# CONFIG_STRIP_ASM_SYMS is not set CONFIG_COMPAT_BRK=y CONFIG_SLAB=y # CONFIG_SLUB is not set @@ -134,6 +145,11 @@ CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_ARCH_TRACEHOOK=y CONFIG_HAVE_CLK=y + +# +# GCOV-based kernel profiling +# +# CONFIG_GCOV_KERNEL is not set # CONFIG_SLOW_WORK is not set # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y @@ -141,7 +157,7 @@ CONFIG_RT_MUTEXES=y CONFIG_BASE_SMALL=0 # CONFIG_MODULES is not set CONFIG_BLOCK=y -# CONFIG_LBD is not set +CONFIG_LBDAF=y # CONFIG_BLK_DEV_INTEGRITY is not set # @@ -225,6 +241,7 @@ CONFIG_BINFMT_ELF=y # CONFIG_HAVE_AOUT is not set CONFIG_BINFMT_MISC=y # CONFIG_IOMMU_HELPER is not set +# CONFIG_SWIOTLB is not set CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y CONFIG_ARCH_HAS_WALK_MEMORY=y CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y @@ -240,9 +257,9 @@ CONFIG_MIGRATION=y CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y -CONFIG_UNEVICTABLE_LRU=y CONFIG_HAVE_MLOCK=y CONFIG_HAVE_MLOCKED_PAGE_BIT=y +CONFIG_DEFAULT_MMAP_MIN_ADDR=4096 CONFIG_PPC_4K_PAGES=y # CONFIG_PPC_16K_PAGES is not set # CONFIG_PPC_64K_PAGES is not set @@ -313,6 +330,7 @@ CONFIG_IP_PNP_BOOTP=y # CONFIG_NET_IPIP is not set # CONFIG_NET_IPGRE is not set # CONFIG_IP_MROUTE is not set +# CONFIG_ARPD is not set CONFIG_SYN_COOKIES=y # CONFIG_INET_AH is not set # CONFIG_INET_ESP is not set @@ -374,7 +392,11 @@ CONFIG_WIRELESS=y CONFIG_WIRELESS_OLD_REGULATORY=y # CONFIG_WIRELESS_EXT is not set # CONFIG_LIB80211 is not set -# CONFIG_MAC80211 is not set + +# +# CFG80211 needs to be enabled for MAC80211 +# +CONFIG_MAC80211_DEFAULT_PS_VALUE=0 # CONFIG_WIMAX is not set # CONFIG_RFKILL is not set @@ -484,6 +506,7 @@ CONFIG_MTD_PHYSMAP_OF=y # CONFIG_MTD_UBI is not set CONFIG_OF_DEVICE=y CONFIG_OF_GPIO=y +CONFIG_OF_MDIO=y # CONFIG_PARPORT is not set CONFIG_BLK_DEV=y # CONFIG_BLK_DEV_FD is not set @@ -523,13 +546,17 @@ CONFIG_HAVE_IDE=y # # -# A new alternative FireWire stack is available with EXPERIMENTAL=y +# You can enable one or both FireWire driver stacks. # + +# +# See the help texts for more information. +# +# CONFIG_FIREWIRE is not set # CONFIG_IEEE1394 is not set # CONFIG_I2O is not set # CONFIG_MACINTOSH_DRIVERS is not set CONFIG_NETDEVICES=y -CONFIG_COMPAT_NET_DEV_OPS=y # CONFIG_DUMMY is not set # CONFIG_BONDING is not set # CONFIG_EQUALIZER is not set @@ -577,6 +604,7 @@ CONFIG_MII=y # CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set # CONFIG_NET_PCI is not set # CONFIG_B44 is not set +# CONFIG_KS8842 is not set # CONFIG_ATL2 is not set CONFIG_FS_ENET=y CONFIG_FS_ENET_HAS_SCC=y @@ -654,6 +682,10 @@ CONFIG_HW_RANDOM=y CONFIG_DEVPORT=y # CONFIG_I2C is not set # CONFIG_SPI is not set + +# +# PPS support +# CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y CONFIG_ARCH_REQUIRE_GPIOLIB=y CONFIG_GPIOLIB=y @@ -697,22 +729,7 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_HTC_PASIC3 is not set # CONFIG_MFD_TMIO is not set # CONFIG_REGULATOR is not set - -# -# Multimedia devices -# - -# -# Multimedia core support -# -# CONFIG_VIDEO_DEV is not set -# CONFIG_DVB_CORE is not set -# CONFIG_VIDEO_MEDIA is not set - -# -# Multimedia drivers -# -# CONFIG_DAB is not set +# CONFIG_MEDIA_SUPPORT is not set # # Graphics support @@ -740,6 +757,10 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_DMADEVICES is not set # CONFIG_AUXDISPLAY is not set # CONFIG_UIO is not set + +# +# TI VLYNQ +# # CONFIG_STAGING is not set # @@ -757,9 +778,10 @@ CONFIG_JBD=y # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set -CONFIG_FILE_LOCKING=y # CONFIG_XFS_FS is not set # CONFIG_OCFS2_FS is not set +CONFIG_FILE_LOCKING=y +CONFIG_FSNOTIFY=y CONFIG_DNOTIFY=y CONFIG_INOTIFY=y CONFIG_INOTIFY_USER=y @@ -916,6 +938,7 @@ CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y CONFIG_HAVE_LMB=y CONFIG_NLATTR=y +CONFIG_GENERIC_ATOMIC64=y # # Kernel hacking @@ -941,6 +964,9 @@ CONFIG_DEBUG_KERNEL=y # CONFIG_RT_MUTEX_TESTER is not set # CONFIG_DEBUG_SPINLOCK is not set # CONFIG_DEBUG_MUTEXES is not set +# CONFIG_DEBUG_LOCK_ALLOC is not set +# CONFIG_PROVE_LOCKING is not set +# CONFIG_LOCK_STAT is not set # CONFIG_DEBUG_SPINLOCK_SLEEP is not set # CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set # CONFIG_DEBUG_KOBJECT is not set @@ -952,7 +978,6 @@ CONFIG_DEBUG_INFO=y # CONFIG_DEBUG_LIST is not set # CONFIG_DEBUG_SG is not set # CONFIG_DEBUG_NOTIFIERS is not set -# CONFIG_BOOT_PRINTK_DELAY is not set # CONFIG_RCU_TORTURE_TEST is not set # CONFIG_RCU_CPU_STALL_DETECTOR is not set # CONFIG_BACKTRACE_SELF_TEST is not set @@ -966,16 +991,15 @@ CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y CONFIG_HAVE_DYNAMIC_FTRACE=y CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y CONFIG_TRACING_SUPPORT=y - -# -# Tracers -# +CONFIG_FTRACE=y # CONFIG_FUNCTION_TRACER is not set +# CONFIG_IRQSOFF_TRACER is not set # CONFIG_SCHED_TRACER is not set -# CONFIG_CONTEXT_SWITCH_TRACER is not set -# CONFIG_EVENT_TRACER is not set +# CONFIG_ENABLE_DEFAULT_TRACERS is not set # CONFIG_BOOT_TRACER is not set -# CONFIG_TRACE_BRANCH_PROFILING is not set +CONFIG_BRANCH_PROFILE_NONE=y +# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set +# CONFIG_PROFILE_ALL_BRANCHES is not set # CONFIG_STACK_TRACER is not set # CONFIG_KMEMTRACE is not set # CONFIG_WORKQUEUE_TRACER is not set @@ -983,9 +1007,12 @@ CONFIG_TRACING_SUPPORT=y # CONFIG_DYNAMIC_DEBUG is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y +# CONFIG_PPC_DISABLE_WERROR is not set +CONFIG_PPC_WERROR=y CONFIG_PRINT_STACK_DEPTH=64 # CONFIG_DEBUG_STACKOVERFLOW is not set # CONFIG_DEBUG_STACK_USAGE is not set +# CONFIG_PPC_EMULATED_STATS is not set # CONFIG_CODE_PATCHING_SELFTEST is not set # CONFIG_FTR_FIXUP_SELFTEST is not set # CONFIG_MSI_BITMAP_SELFTEST is not set diff --git a/arch/powerpc/configs/mgsuvd_defconfig b/arch/powerpc/configs/mgsuvd_defconfig index 24fa90792c5..1ae85a3b294 100644 --- a/arch/powerpc/configs/mgsuvd_defconfig +++ b/arch/powerpc/configs/mgsuvd_defconfig @@ -1,14 +1,14 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.30-rc3 -# Wed May 13 17:21:55 2009 +# Linux kernel version: 2.6.31-rc4 +# Wed Jul 29 23:31:52 2009 # # CONFIG_PPC64 is not set # # Processor support # -# CONFIG_6xx is not set +# CONFIG_PPC_BOOK3S_32 is not set # CONFIG_PPC_85xx is not set CONFIG_PPC_8xx=y # CONFIG_40x is not set @@ -27,15 +27,16 @@ CONFIG_GENERIC_TIME=y CONFIG_GENERIC_TIME_VSYSCALL=y CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_GENERIC_HARDIRQS=y +CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set CONFIG_IRQ_PER_CPU=y CONFIG_STACKTRACE_SUPPORT=y CONFIG_HAVE_LATENCYTOP_SUPPORT=y +CONFIG_TRACE_IRQFLAGS_SUPPORT=y CONFIG_LOCKDEP_SUPPORT=y CONFIG_RWSEM_XCHGADD_ALGORITHM=y CONFIG_ARCH_HAS_ILOG2_U32=y CONFIG_GENERIC_HWEIGHT=y -CONFIG_GENERIC_CALIBRATE_DELAY=y CONFIG_GENERIC_FIND_NEXT_BIT=y # CONFIG_ARCH_NO_VIRT_TO_BUS is not set CONFIG_PPC=y @@ -48,11 +49,13 @@ CONFIG_OF=y # CONFIG_PPC_UDBG_16550 is not set # CONFIG_GENERIC_TBSYNC is not set CONFIG_AUDIT_ARCH=y +CONFIG_DTC=y # CONFIG_DEFAULT_UIMAGE is not set # CONFIG_PPC_DCR_NATIVE is not set # CONFIG_PPC_DCR_MMIO is not set CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" +CONFIG_CONSTRUCTORS=y # # General setup @@ -102,7 +105,6 @@ CONFIG_EMBEDDED=y # CONFIG_SYSCTL_SYSCALL is not set CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_EXTRA_PASS is not set -# CONFIG_STRIP_ASM_SYMS is not set # CONFIG_HOTPLUG is not set CONFIG_PRINTK=y # CONFIG_BUG is not set @@ -115,7 +117,14 @@ CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y CONFIG_AIO=y +CONFIG_HAVE_PERF_COUNTERS=y + +# +# Performance Counters +# +# CONFIG_PERF_COUNTERS is not set # CONFIG_VM_EVENT_COUNTERS is not set +# CONFIG_STRIP_ASM_SYMS is not set CONFIG_COMPAT_BRK=y CONFIG_SLAB=y # CONFIG_SLUB is not set @@ -129,6 +138,11 @@ CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_ARCH_TRACEHOOK=y CONFIG_HAVE_CLK=y + +# +# GCOV-based kernel profiling +# +# CONFIG_GCOV_KERNEL is not set # CONFIG_SLOW_WORK is not set # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y @@ -136,7 +150,7 @@ CONFIG_RT_MUTEXES=y CONFIG_BASE_SMALL=1 # CONFIG_MODULES is not set CONFIG_BLOCK=y -# CONFIG_LBD is not set +CONFIG_LBDAF=y # CONFIG_BLK_DEV_BSG is not set # CONFIG_BLK_DEV_INTEGRITY is not set @@ -222,6 +236,7 @@ CONFIG_BINFMT_ELF=y # CONFIG_BINFMT_MISC is not set CONFIG_MATH_EMULATION=y # CONFIG_IOMMU_HELPER is not set +# CONFIG_SWIOTLB is not set CONFIG_PPC_NEED_DMA_SYNC_OPS=y CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y CONFIG_ARCH_HAS_WALK_MEMORY=y @@ -241,9 +256,9 @@ CONFIG_MIGRATION=y CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y -CONFIG_UNEVICTABLE_LRU=y CONFIG_HAVE_MLOCK=y CONFIG_HAVE_MLOCKED_PAGE_BIT=y +CONFIG_DEFAULT_MMAP_MIN_ADDR=4096 CONFIG_PPC_4K_PAGES=y # CONFIG_PPC_16K_PAGES is not set # CONFIG_PPC_64K_PAGES is not set @@ -281,6 +296,7 @@ CONFIG_PAGE_OFFSET=0xc0000000 CONFIG_KERNEL_START=0xc0000000 CONFIG_PHYSICAL_START=0x00000000 CONFIG_TASK_SIZE=0x80000000 +CONFIG_CONSISTENT_SIZE=0x00200000 CONFIG_NET=y # @@ -342,6 +358,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set # CONFIG_PHONET is not set +# CONFIG_IEEE802154 is not set # CONFIG_NET_SCHED is not set # CONFIG_DCB is not set @@ -359,7 +376,11 @@ CONFIG_WIRELESS=y CONFIG_WIRELESS_OLD_REGULATORY=y # CONFIG_WIRELESS_EXT is not set # CONFIG_LIB80211 is not set -# CONFIG_MAC80211 is not set + +# +# CFG80211 needs to be enabled for MAC80211 +# +CONFIG_MAC80211_DEFAULT_PS_VALUE=0 # CONFIG_WIMAX is not set # CONFIG_RFKILL is not set # CONFIG_NET_9P is not set @@ -463,6 +484,7 @@ CONFIG_MTD_PHYSMAP_OF=y # # CONFIG_MTD_UBI is not set CONFIG_OF_DEVICE=y +CONFIG_OF_MDIO=y # CONFIG_PARPORT is not set CONFIG_BLK_DEV=y # CONFIG_BLK_DEV_FD is not set @@ -492,7 +514,6 @@ CONFIG_HAVE_IDE=y # CONFIG_MD is not set # CONFIG_MACINTOSH_DRIVERS is not set CONFIG_NETDEVICES=y -CONFIG_COMPAT_NET_DEV_OPS=y # CONFIG_DUMMY is not set # CONFIG_BONDING is not set # CONFIG_MACVLAN is not set @@ -531,6 +552,7 @@ CONFIG_MII=y # CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set # CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set # CONFIG_B44 is not set +# CONFIG_KS8842 is not set CONFIG_FS_ENET=y CONFIG_FS_ENET_HAS_SCC=y # CONFIG_FS_ENET_HAS_FEC is not set @@ -602,6 +624,11 @@ CONFIG_GEN_RTC=y # CONFIG_TCG_TPM is not set # CONFIG_I2C is not set # CONFIG_SPI is not set + +# +# PPS support +# +# CONFIG_PPS is not set CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y # CONFIG_GPIOLIB is not set # CONFIG_W1 is not set @@ -625,22 +652,7 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_HTC_PASIC3 is not set # CONFIG_MFD_TMIO is not set # CONFIG_REGULATOR is not set - -# -# Multimedia devices -# - -# -# Multimedia core support -# -# CONFIG_VIDEO_DEV is not set -# CONFIG_DVB_CORE is not set -# CONFIG_VIDEO_MEDIA is not set - -# -# Multimedia drivers -# -# CONFIG_DAB is not set +# CONFIG_MEDIA_SUPPORT is not set # # Graphics support @@ -665,6 +677,10 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_DMADEVICES is not set # CONFIG_AUXDISPLAY is not set # CONFIG_UIO is not set + +# +# TI VLYNQ +# # CONFIG_STAGING is not set # @@ -687,10 +703,12 @@ CONFIG_FS_MBCACHE=y # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set -CONFIG_FILE_LOCKING=y # CONFIG_XFS_FS is not set +# CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set # CONFIG_BTRFS_FS is not set +CONFIG_FILE_LOCKING=y +CONFIG_FSNOTIFY=y CONFIG_DNOTIFY=y CONFIG_INOTIFY=y CONFIG_INOTIFY_USER=y @@ -823,6 +841,7 @@ CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y CONFIG_HAVE_LMB=y CONFIG_NLATTR=y +CONFIG_GENERIC_ATOMIC64=y # # Kernel hacking @@ -844,24 +863,14 @@ CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y CONFIG_HAVE_DYNAMIC_FTRACE=y CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y CONFIG_TRACING_SUPPORT=y - -# -# Tracers -# -# CONFIG_FUNCTION_TRACER is not set -# CONFIG_SCHED_TRACER is not set -# CONFIG_CONTEXT_SWITCH_TRACER is not set -# CONFIG_EVENT_TRACER is not set -# CONFIG_BOOT_TRACER is not set -# CONFIG_TRACE_BRANCH_PROFILING is not set -# CONFIG_STACK_TRACER is not set -# CONFIG_KMEMTRACE is not set -# CONFIG_WORKQUEUE_TRACER is not set -# CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_FTRACE is not set # CONFIG_DYNAMIC_DEBUG is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y +# CONFIG_PPC_DISABLE_WERROR is not set +CONFIG_PPC_WERROR=y CONFIG_PRINT_STACK_DEPTH=64 +# CONFIG_PPC_EMULATED_STATS is not set # CONFIG_IRQSTACKS is not set # CONFIG_VIRQ_DEBUG is not set # CONFIG_PPC_EARLY_DEBUG is not set diff --git a/arch/powerpc/configs/mpc7448_hpc2_defconfig b/arch/powerpc/configs/mpc7448_hpc2_defconfig index 642ab67c843..f23428c3b34 100644 --- a/arch/powerpc/configs/mpc7448_hpc2_defconfig +++ b/arch/powerpc/configs/mpc7448_hpc2_defconfig @@ -1,25 +1,27 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.30-rc3 -# Wed May 13 17:21:56 2009 +# Linux kernel version: 2.6.31-rc4 +# Wed Jul 29 23:31:53 2009 # # CONFIG_PPC64 is not set # # Processor support # -CONFIG_6xx=y +CONFIG_PPC_BOOK3S_32=y # CONFIG_PPC_85xx is not set # CONFIG_PPC_8xx is not set # CONFIG_40x is not set # CONFIG_44x is not set # CONFIG_E200 is not set CONFIG_PPC_BOOK3S=y +CONFIG_6xx=y CONFIG_PPC_FPU=y CONFIG_ALTIVEC=y CONFIG_PPC_STD_MMU=y CONFIG_PPC_STD_MMU_32=y # CONFIG_PPC_MM_SLICES is not set +CONFIG_PPC_HAVE_PMU_SUPPORT=y # CONFIG_SMP is not set CONFIG_PPC32=y CONFIG_WORD_SIZE=32 @@ -30,15 +32,16 @@ CONFIG_GENERIC_TIME=y CONFIG_GENERIC_TIME_VSYSCALL=y CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_GENERIC_HARDIRQS=y +CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set CONFIG_IRQ_PER_CPU=y CONFIG_STACKTRACE_SUPPORT=y CONFIG_HAVE_LATENCYTOP_SUPPORT=y +CONFIG_TRACE_IRQFLAGS_SUPPORT=y CONFIG_LOCKDEP_SUPPORT=y CONFIG_RWSEM_XCHGADD_ALGORITHM=y CONFIG_ARCH_HAS_ILOG2_U32=y CONFIG_GENERIC_HWEIGHT=y -CONFIG_GENERIC_CALIBRATE_DELAY=y CONFIG_GENERIC_FIND_NEXT_BIT=y # CONFIG_ARCH_NO_VIRT_TO_BUS is not set CONFIG_PPC=y @@ -52,11 +55,13 @@ CONFIG_PPC_UDBG_16550=y # CONFIG_GENERIC_TBSYNC is not set CONFIG_AUDIT_ARCH=y CONFIG_GENERIC_BUG=y +CONFIG_DTC=y CONFIG_DEFAULT_UIMAGE=y # CONFIG_PPC_DCR_NATIVE is not set # CONFIG_PPC_DCR_MMIO is not set CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" +CONFIG_CONSTRUCTORS=y # # General setup @@ -106,7 +111,6 @@ CONFIG_EMBEDDED=y CONFIG_SYSCTL_SYSCALL=y CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_EXTRA_PASS is not set -# CONFIG_STRIP_ASM_SYMS is not set CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y @@ -119,9 +123,16 @@ CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y CONFIG_AIO=y +CONFIG_HAVE_PERF_COUNTERS=y + +# +# Performance Counters +# +# CONFIG_PERF_COUNTERS is not set CONFIG_VM_EVENT_COUNTERS=y CONFIG_PCI_QUIRKS=y CONFIG_SLUB_DEBUG=y +# CONFIG_STRIP_ASM_SYMS is not set CONFIG_COMPAT_BRK=y # CONFIG_SLAB is not set CONFIG_SLUB=y @@ -134,6 +145,10 @@ CONFIG_HAVE_IOREMAP_PROT=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_ARCH_TRACEHOOK=y + +# +# GCOV-based kernel profiling +# # CONFIG_SLOW_WORK is not set # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y @@ -141,7 +156,7 @@ CONFIG_RT_MUTEXES=y CONFIG_BASE_SMALL=0 # CONFIG_MODULES is not set CONFIG_BLOCK=y -CONFIG_LBD=y +CONFIG_LBDAF=y # CONFIG_BLK_DEV_BSG is not set # CONFIG_BLK_DEV_INTEGRITY is not set @@ -220,6 +235,7 @@ CONFIG_BINFMT_ELF=y # CONFIG_HAVE_AOUT is not set CONFIG_BINFMT_MISC=y # CONFIG_IOMMU_HELPER is not set +# CONFIG_SWIOTLB is not set CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y CONFIG_ARCH_HAS_WALK_MEMORY=y CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y @@ -240,9 +256,9 @@ CONFIG_MIGRATION=y CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y -CONFIG_UNEVICTABLE_LRU=y CONFIG_HAVE_MLOCK=y CONFIG_HAVE_MLOCKED_PAGE_BIT=y +CONFIG_DEFAULT_MMAP_MIN_ADDR=4096 CONFIG_PPC_4K_PAGES=y # CONFIG_PPC_16K_PAGES is not set # CONFIG_PPC_64K_PAGES is not set @@ -348,6 +364,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set # CONFIG_PHONET is not set +# CONFIG_IEEE802154 is not set # CONFIG_NET_SCHED is not set # CONFIG_DCB is not set @@ -365,7 +382,11 @@ CONFIG_WIRELESS=y CONFIG_WIRELESS_OLD_REGULATORY=y # CONFIG_WIRELESS_EXT is not set # CONFIG_LIB80211 is not set -# CONFIG_MAC80211 is not set + +# +# CFG80211 needs to be enabled for MAC80211 +# +CONFIG_MAC80211_DEFAULT_PS_VALUE=0 # CONFIG_WIMAX is not set # CONFIG_RFKILL is not set # CONFIG_NET_9P is not set @@ -385,6 +406,7 @@ CONFIG_PREVENT_FIRMWARE_BUILD=y # CONFIG_CONNECTOR is not set # CONFIG_MTD is not set CONFIG_OF_DEVICE=y +CONFIG_OF_MDIO=y # CONFIG_PARPORT is not set CONFIG_BLK_DEV=y # CONFIG_BLK_DEV_FD is not set @@ -416,6 +438,7 @@ CONFIG_MISC_DEVICES=y # EEPROM support # # CONFIG_EEPROM_93CX6 is not set +# CONFIG_CB710_CORE is not set CONFIG_HAVE_IDE=y # CONFIG_IDE is not set @@ -438,10 +461,6 @@ CONFIG_BLK_DEV_SD=y # CONFIG_BLK_DEV_SR is not set # CONFIG_CHR_DEV_SG is not set # CONFIG_CHR_DEV_SCH is not set - -# -# Some SCSI devices (e.g. CD jukebox) support multiple LUNs -# # CONFIG_SCSI_MULTI_LUN is not set # CONFIG_SCSI_CONSTANTS is not set # CONFIG_SCSI_LOGGING is not set @@ -458,6 +477,7 @@ CONFIG_BLK_DEV_SD=y CONFIG_SCSI_LOWLEVEL=y # CONFIG_ISCSI_TCP is not set # CONFIG_SCSI_CXGB3_ISCSI is not set +# CONFIG_SCSI_BNX2_ISCSI is not set # CONFIG_BLK_DEV_3W_XXXX_RAID is not set # CONFIG_SCSI_3W_9XXX is not set # CONFIG_SCSI_ACARD is not set @@ -466,6 +486,7 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_SCSI_AIC7XXX_OLD is not set # CONFIG_SCSI_AIC79XX is not set # CONFIG_SCSI_AIC94XX is not set +# CONFIG_SCSI_MVSAS is not set # CONFIG_SCSI_DPT_I2O is not set # CONFIG_SCSI_ADVANSYS is not set # CONFIG_SCSI_ARCMSR is not set @@ -485,7 +506,6 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_SCSI_IPS is not set # CONFIG_SCSI_INITIO is not set # CONFIG_SCSI_INIA100 is not set -# CONFIG_SCSI_MVSAS is not set # CONFIG_SCSI_STEX is not set # CONFIG_SCSI_SYM53C8XX_2 is not set # CONFIG_SCSI_IPR is not set @@ -568,14 +588,17 @@ CONFIG_SATA_MV=y # # -# Enable only one of the two stacks, unless you know what you are doing +# You can enable one or both FireWire driver stacks. +# + +# +# See the help texts for more information. # # CONFIG_FIREWIRE is not set # CONFIG_IEEE1394 is not set # CONFIG_I2O is not set # CONFIG_MACINTOSH_DRIVERS is not set CONFIG_NETDEVICES=y -CONFIG_COMPAT_NET_DEV_OPS=y # CONFIG_DUMMY is not set # CONFIG_BONDING is not set # CONFIG_MACVLAN is not set @@ -642,6 +665,7 @@ CONFIG_8139TOO=y # CONFIG_SMSC9420 is not set # CONFIG_SUNDANCE is not set # CONFIG_TLAN is not set +# CONFIG_KS8842 is not set # CONFIG_VIA_RHINE is not set # CONFIG_SC92031 is not set # CONFIG_ATL2 is not set @@ -663,7 +687,9 @@ CONFIG_NETDEV_1000=y # CONFIG_VIA_VELOCITY is not set # CONFIG_TIGON3 is not set # CONFIG_BNX2 is not set +# CONFIG_CNIC is not set CONFIG_TSI108_ETH=y +# CONFIG_MV643XX_ETH is not set # CONFIG_QLA3XXX is not set # CONFIG_ATL1 is not set # CONFIG_ATL1E is not set @@ -785,6 +811,11 @@ CONFIG_GEN_RTC=y CONFIG_DEVPORT=y # CONFIG_I2C is not set # CONFIG_SPI is not set + +# +# PPS support +# +# CONFIG_PPS is not set CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y # CONFIG_GPIOLIB is not set # CONFIG_W1 is not set @@ -824,22 +855,7 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_HTC_PASIC3 is not set # CONFIG_MFD_TMIO is not set # CONFIG_REGULATOR is not set - -# -# Multimedia devices -# - -# -# Multimedia core support -# -# CONFIG_VIDEO_DEV is not set -# CONFIG_DVB_CORE is not set -# CONFIG_VIDEO_MEDIA is not set - -# -# Multimedia drivers -# -CONFIG_DAB=y +# CONFIG_MEDIA_SUPPORT is not set # # Graphics support @@ -896,6 +912,10 @@ CONFIG_USB_ARCH_HAS_EHCI=y # CONFIG_DMADEVICES is not set # CONFIG_AUXDISPLAY is not set # CONFIG_UIO is not set + +# +# TI VLYNQ +# # CONFIG_STAGING is not set # @@ -915,11 +935,12 @@ CONFIG_FS_MBCACHE=y # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set -CONFIG_FILE_LOCKING=y # CONFIG_XFS_FS is not set # CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set # CONFIG_BTRFS_FS is not set +CONFIG_FILE_LOCKING=y +CONFIG_FSNOTIFY=y CONFIG_DNOTIFY=y CONFIG_INOTIFY=y CONFIG_INOTIFY_USER=y @@ -1038,6 +1059,7 @@ CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y CONFIG_HAVE_LMB=y CONFIG_NLATTR=y +CONFIG_GENERIC_ATOMIC64=y # # Kernel hacking @@ -1063,22 +1085,11 @@ CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y CONFIG_HAVE_DYNAMIC_FTRACE=y CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y CONFIG_TRACING_SUPPORT=y - -# -# Tracers -# -# CONFIG_FUNCTION_TRACER is not set -# CONFIG_SCHED_TRACER is not set -# CONFIG_CONTEXT_SWITCH_TRACER is not set -# CONFIG_EVENT_TRACER is not set -# CONFIG_BOOT_TRACER is not set -# CONFIG_TRACE_BRANCH_PROFILING is not set -# CONFIG_STACK_TRACER is not set -# CONFIG_KMEMTRACE is not set -# CONFIG_WORKQUEUE_TRACER is not set -# CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_FTRACE is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y +# CONFIG_PPC_DISABLE_WERROR is not set +CONFIG_PPC_WERROR=y CONFIG_PRINT_STACK_DEPTH=64 # CONFIG_IRQSTACKS is not set # CONFIG_BOOTX_TEXT is not set diff --git a/arch/powerpc/configs/mpc8272_ads_defconfig b/arch/powerpc/configs/mpc8272_ads_defconfig index cb966ca2ce8..02716f72db6 100644 --- a/arch/powerpc/configs/mpc8272_ads_defconfig +++ b/arch/powerpc/configs/mpc8272_ads_defconfig @@ -1,25 +1,27 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.30-rc3 -# Wed May 13 17:21:57 2009 +# Linux kernel version: 2.6.31-rc4 +# Wed Jul 29 23:31:54 2009 # # CONFIG_PPC64 is not set # # Processor support # -CONFIG_6xx=y +CONFIG_PPC_BOOK3S_32=y # CONFIG_PPC_85xx is not set # CONFIG_PPC_8xx is not set # CONFIG_40x is not set # CONFIG_44x is not set # CONFIG_E200 is not set CONFIG_PPC_BOOK3S=y +CONFIG_6xx=y CONFIG_PPC_FPU=y # CONFIG_ALTIVEC is not set CONFIG_PPC_STD_MMU=y CONFIG_PPC_STD_MMU_32=y # CONFIG_PPC_MM_SLICES is not set +CONFIG_PPC_HAVE_PMU_SUPPORT=y # CONFIG_SMP is not set CONFIG_PPC32=y CONFIG_WORD_SIZE=32 @@ -30,15 +32,16 @@ CONFIG_GENERIC_TIME=y CONFIG_GENERIC_TIME_VSYSCALL=y CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_GENERIC_HARDIRQS=y +CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set CONFIG_IRQ_PER_CPU=y CONFIG_STACKTRACE_SUPPORT=y CONFIG_HAVE_LATENCYTOP_SUPPORT=y +CONFIG_TRACE_IRQFLAGS_SUPPORT=y CONFIG_LOCKDEP_SUPPORT=y CONFIG_RWSEM_XCHGADD_ALGORITHM=y CONFIG_ARCH_HAS_ILOG2_U32=y CONFIG_GENERIC_HWEIGHT=y -CONFIG_GENERIC_CALIBRATE_DELAY=y CONFIG_GENERIC_FIND_NEXT_BIT=y CONFIG_GENERIC_GPIO=y # CONFIG_ARCH_NO_VIRT_TO_BUS is not set @@ -53,11 +56,13 @@ CONFIG_OF=y # CONFIG_GENERIC_TBSYNC is not set CONFIG_AUDIT_ARCH=y CONFIG_GENERIC_BUG=y +CONFIG_DTC=y CONFIG_DEFAULT_UIMAGE=y # CONFIG_PPC_DCR_NATIVE is not set # CONFIG_PPC_DCR_MMIO is not set CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" +CONFIG_CONSTRUCTORS=y # # General setup @@ -99,7 +104,6 @@ CONFIG_SYSCTL_SYSCALL=y CONFIG_KALLSYMS=y CONFIG_KALLSYMS_ALL=y # CONFIG_KALLSYMS_EXTRA_PASS is not set -# CONFIG_STRIP_ASM_SYMS is not set CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y @@ -112,9 +116,16 @@ CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y CONFIG_AIO=y +CONFIG_HAVE_PERF_COUNTERS=y + +# +# Performance Counters +# +# CONFIG_PERF_COUNTERS is not set CONFIG_VM_EVENT_COUNTERS=y CONFIG_PCI_QUIRKS=y CONFIG_SLUB_DEBUG=y +# CONFIG_STRIP_ASM_SYMS is not set CONFIG_COMPAT_BRK=y # CONFIG_SLAB is not set CONFIG_SLUB=y @@ -128,6 +139,10 @@ CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_ARCH_TRACEHOOK=y CONFIG_HAVE_CLK=y + +# +# GCOV-based kernel profiling +# # CONFIG_SLOW_WORK is not set # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y @@ -135,7 +150,7 @@ CONFIG_RT_MUTEXES=y CONFIG_BASE_SMALL=0 # CONFIG_MODULES is not set CONFIG_BLOCK=y -# CONFIG_LBD is not set +CONFIG_LBDAF=y # CONFIG_BLK_DEV_INTEGRITY is not set # @@ -216,6 +231,7 @@ CONFIG_BINFMT_ELF=y # CONFIG_HAVE_AOUT is not set CONFIG_BINFMT_MISC=y # CONFIG_IOMMU_HELPER is not set +# CONFIG_SWIOTLB is not set CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y CONFIG_ARCH_HAS_WALK_MEMORY=y CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y @@ -231,9 +247,9 @@ CONFIG_MIGRATION=y CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y -CONFIG_UNEVICTABLE_LRU=y CONFIG_HAVE_MLOCK=y CONFIG_HAVE_MLOCKED_PAGE_BIT=y +CONFIG_DEFAULT_MMAP_MIN_ADDR=4096 CONFIG_PPC_4K_PAGES=y # CONFIG_PPC_16K_PAGES is not set # CONFIG_PPC_64K_PAGES is not set @@ -303,6 +319,7 @@ CONFIG_IP_PNP_BOOTP=y # CONFIG_NET_IPIP is not set # CONFIG_NET_IPGRE is not set # CONFIG_IP_MROUTE is not set +# CONFIG_ARPD is not set CONFIG_SYN_COOKIES=y # CONFIG_INET_AH is not set # CONFIG_INET_ESP is not set @@ -383,7 +400,11 @@ CONFIG_WIRELESS=y CONFIG_WIRELESS_OLD_REGULATORY=y # CONFIG_WIRELESS_EXT is not set # CONFIG_LIB80211 is not set -# CONFIG_MAC80211 is not set + +# +# CFG80211 needs to be enabled for MAC80211 +# +CONFIG_MAC80211_DEFAULT_PS_VALUE=0 # CONFIG_WIMAX is not set # CONFIG_RFKILL is not set @@ -489,6 +510,7 @@ CONFIG_MTD_PHYSMAP_OF=y # CONFIG_MTD_UBI is not set CONFIG_OF_DEVICE=y CONFIG_OF_GPIO=y +CONFIG_OF_MDIO=y # CONFIG_PARPORT is not set CONFIG_BLK_DEV=y # CONFIG_BLK_DEV_FD is not set @@ -524,13 +546,17 @@ CONFIG_HAVE_IDE=y # # -# A new alternative FireWire stack is available with EXPERIMENTAL=y +# You can enable one or both FireWire driver stacks. +# + +# +# See the help texts for more information. # +# CONFIG_FIREWIRE is not set # CONFIG_IEEE1394 is not set # CONFIG_I2O is not set # CONFIG_MACINTOSH_DRIVERS is not set CONFIG_NETDEVICES=y -CONFIG_COMPAT_NET_DEV_OPS=y # CONFIG_DUMMY is not set # CONFIG_BONDING is not set # CONFIG_EQUALIZER is not set @@ -577,6 +603,7 @@ CONFIG_MII=y # CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set # CONFIG_NET_PCI is not set # CONFIG_B44 is not set +# CONFIG_KS8842 is not set # CONFIG_ATL2 is not set CONFIG_FS_ENET=y # CONFIG_FS_ENET_HAS_SCC is not set @@ -598,8 +625,10 @@ CONFIG_NETDEV_1000=y # CONFIG_VIA_VELOCITY is not set # CONFIG_TIGON3 is not set # CONFIG_BNX2 is not set +# CONFIG_CNIC is not set # CONFIG_FSL_PQ_MDIO is not set # CONFIG_GIANFAR is not set +# CONFIG_MV643XX_ETH is not set # CONFIG_QLA3XXX is not set # CONFIG_ATL1 is not set # CONFIG_JME is not set @@ -671,12 +700,13 @@ CONFIG_INPUT_EVDEV=y # CONFIG_INPUT_KEYBOARD=y CONFIG_KEYBOARD_ATKBD=y -# CONFIG_KEYBOARD_SUNKBD is not set # CONFIG_KEYBOARD_LKKBD is not set -# CONFIG_KEYBOARD_XTKBD is not set +# CONFIG_KEYBOARD_GPIO is not set +# CONFIG_KEYBOARD_MATRIX is not set # CONFIG_KEYBOARD_NEWTON is not set # CONFIG_KEYBOARD_STOWAWAY is not set -# CONFIG_KEYBOARD_GPIO is not set +# CONFIG_KEYBOARD_SUNKBD is not set +# CONFIG_KEYBOARD_XTKBD is not set CONFIG_INPUT_MOUSE=y CONFIG_MOUSE_PS2=y CONFIG_MOUSE_PS2_ALPS=y @@ -741,6 +771,10 @@ CONFIG_HW_RANDOM=y CONFIG_DEVPORT=y # CONFIG_I2C is not set # CONFIG_SPI is not set + +# +# PPS support +# CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y CONFIG_ARCH_REQUIRE_GPIOLIB=y CONFIG_GPIOLIB=y @@ -784,22 +818,7 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_HTC_PASIC3 is not set # CONFIG_MFD_TMIO is not set # CONFIG_REGULATOR is not set - -# -# Multimedia devices -# - -# -# Multimedia core support -# -# CONFIG_VIDEO_DEV is not set -# CONFIG_DVB_CORE is not set -# CONFIG_VIDEO_MEDIA is not set - -# -# Multimedia drivers -# -CONFIG_DAB=y +# CONFIG_MEDIA_SUPPORT is not set # # Graphics support @@ -828,6 +847,10 @@ CONFIG_DAB=y # CONFIG_DMADEVICES is not set # CONFIG_AUXDISPLAY is not set # CONFIG_UIO is not set + +# +# TI VLYNQ +# # CONFIG_STAGING is not set # @@ -847,9 +870,10 @@ CONFIG_FS_MBCACHE=y # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set CONFIG_FS_POSIX_ACL=y -CONFIG_FILE_LOCKING=y # CONFIG_XFS_FS is not set # CONFIG_OCFS2_FS is not set +CONFIG_FILE_LOCKING=y +CONFIG_FSNOTIFY=y CONFIG_DNOTIFY=y CONFIG_INOTIFY=y CONFIG_INOTIFY_USER=y @@ -998,6 +1022,7 @@ CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y CONFIG_HAVE_LMB=y CONFIG_NLATTR=y +CONFIG_GENERIC_ATOMIC64=y # # Kernel hacking @@ -1028,6 +1053,9 @@ CONFIG_SCHED_DEBUG=y # CONFIG_RT_MUTEX_TESTER is not set # CONFIG_DEBUG_SPINLOCK is not set # CONFIG_DEBUG_MUTEXES is not set +# CONFIG_DEBUG_LOCK_ALLOC is not set +# CONFIG_PROVE_LOCKING is not set +# CONFIG_LOCK_STAT is not set # CONFIG_DEBUG_SPINLOCK_SLEEP is not set # CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set # CONFIG_DEBUG_KOBJECT is not set @@ -1039,7 +1067,6 @@ CONFIG_DEBUG_INFO=y # CONFIG_DEBUG_LIST is not set # CONFIG_DEBUG_SG is not set # CONFIG_DEBUG_NOTIFIERS is not set -# CONFIG_BOOT_PRINTK_DELAY is not set # CONFIG_RCU_TORTURE_TEST is not set # CONFIG_RCU_CPU_STALL_DETECTOR is not set # CONFIG_BACKTRACE_SELF_TEST is not set @@ -1053,22 +1080,23 @@ CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y CONFIG_HAVE_DYNAMIC_FTRACE=y CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y CONFIG_TRACING_SUPPORT=y - -# -# Tracers -# +CONFIG_FTRACE=y # CONFIG_FUNCTION_TRACER is not set +# CONFIG_IRQSOFF_TRACER is not set # CONFIG_SCHED_TRACER is not set -# CONFIG_CONTEXT_SWITCH_TRACER is not set -# CONFIG_EVENT_TRACER is not set +# CONFIG_ENABLE_DEFAULT_TRACERS is not set # CONFIG_BOOT_TRACER is not set -# CONFIG_TRACE_BRANCH_PROFILING is not set +CONFIG_BRANCH_PROFILE_NONE=y +# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set +# CONFIG_PROFILE_ALL_BRANCHES is not set # CONFIG_STACK_TRACER is not set # CONFIG_KMEMTRACE is not set # CONFIG_WORKQUEUE_TRACER is not set # CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y +# CONFIG_PPC_DISABLE_WERROR is not set +CONFIG_PPC_WERROR=y CONFIG_PRINT_STACK_DEPTH=64 # CONFIG_DEBUG_STACKOVERFLOW is not set # CONFIG_DEBUG_STACK_USAGE is not set diff --git a/arch/powerpc/configs/mpc83xx_defconfig b/arch/powerpc/configs/mpc83xx_defconfig index 433c303eb82..4a96cb6925b 100644 --- a/arch/powerpc/configs/mpc83xx_defconfig +++ b/arch/powerpc/configs/mpc83xx_defconfig @@ -1,26 +1,28 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.30-rc3 -# Wed May 13 17:21:58 2009 +# Linux kernel version: 2.6.31-rc4 +# Wed Jul 29 23:31:55 2009 # # CONFIG_PPC64 is not set # # Processor support # -CONFIG_6xx=y +CONFIG_PPC_BOOK3S_32=y # CONFIG_PPC_85xx is not set # CONFIG_PPC_8xx is not set # CONFIG_40x is not set # CONFIG_44x is not set # CONFIG_E200 is not set CONFIG_PPC_BOOK3S=y +CONFIG_6xx=y CONFIG_PPC_FPU=y # CONFIG_FSL_EMB_PERFMON is not set # CONFIG_ALTIVEC is not set CONFIG_PPC_STD_MMU=y CONFIG_PPC_STD_MMU_32=y # CONFIG_PPC_MM_SLICES is not set +CONFIG_PPC_HAVE_PMU_SUPPORT=y # CONFIG_SMP is not set CONFIG_PPC32=y CONFIG_WORD_SIZE=32 @@ -31,15 +33,16 @@ CONFIG_GENERIC_TIME=y CONFIG_GENERIC_TIME_VSYSCALL=y CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_GENERIC_HARDIRQS=y +CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set CONFIG_IRQ_PER_CPU=y CONFIG_STACKTRACE_SUPPORT=y CONFIG_HAVE_LATENCYTOP_SUPPORT=y +CONFIG_TRACE_IRQFLAGS_SUPPORT=y CONFIG_LOCKDEP_SUPPORT=y CONFIG_RWSEM_XCHGADD_ALGORITHM=y CONFIG_ARCH_HAS_ILOG2_U32=y CONFIG_GENERIC_HWEIGHT=y -CONFIG_GENERIC_CALIBRATE_DELAY=y CONFIG_GENERIC_FIND_NEXT_BIT=y CONFIG_GENERIC_GPIO=y # CONFIG_ARCH_NO_VIRT_TO_BUS is not set @@ -54,6 +57,7 @@ CONFIG_PPC_UDBG_16550=y # CONFIG_GENERIC_TBSYNC is not set CONFIG_AUDIT_ARCH=y CONFIG_GENERIC_BUG=y +CONFIG_DTC=y CONFIG_DEFAULT_UIMAGE=y CONFIG_REDBOOT=y CONFIG_ARCH_SUSPEND_POSSIBLE=y @@ -61,6 +65,7 @@ CONFIG_ARCH_SUSPEND_POSSIBLE=y # CONFIG_PPC_DCR_MMIO is not set CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" +CONFIG_CONSTRUCTORS=y # # General setup @@ -110,7 +115,6 @@ CONFIG_EMBEDDED=y CONFIG_SYSCTL_SYSCALL=y CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_EXTRA_PASS is not set -# CONFIG_STRIP_ASM_SYMS is not set CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y @@ -123,8 +127,15 @@ CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y CONFIG_AIO=y +CONFIG_HAVE_PERF_COUNTERS=y + +# +# Performance Counters +# +# CONFIG_PERF_COUNTERS is not set CONFIG_VM_EVENT_COUNTERS=y CONFIG_PCI_QUIRKS=y +# CONFIG_STRIP_ASM_SYMS is not set CONFIG_COMPAT_BRK=y CONFIG_SLAB=y # CONFIG_SLUB is not set @@ -138,6 +149,10 @@ CONFIG_HAVE_IOREMAP_PROT=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_ARCH_TRACEHOOK=y + +# +# GCOV-based kernel profiling +# # CONFIG_SLOW_WORK is not set # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y @@ -150,7 +165,7 @@ CONFIG_MODULE_UNLOAD=y # CONFIG_MODVERSIONS is not set # CONFIG_MODULE_SRCVERSION_ALL is not set CONFIG_BLOCK=y -# CONFIG_LBD is not set +CONFIG_LBDAF=y # CONFIG_BLK_DEV_BSG is not set # CONFIG_BLK_DEV_INTEGRITY is not set @@ -192,6 +207,7 @@ CONFIG_MPC837x_MDS=y CONFIG_MPC837x_RDB=y CONFIG_SBC834x=y CONFIG_ASP834x=y +# CONFIG_KMETER1 is not set CONFIG_PPC_MPC831x=y CONFIG_PPC_MPC832x=y CONFIG_PPC_MPC834x=y @@ -241,6 +257,7 @@ CONFIG_BINFMT_ELF=y # CONFIG_BINFMT_MISC is not set CONFIG_MATH_EMULATION=y # CONFIG_IOMMU_HELPER is not set +# CONFIG_SWIOTLB is not set CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y CONFIG_ARCH_HAS_WALK_MEMORY=y CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y @@ -261,9 +278,9 @@ CONFIG_MIGRATION=y CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y -CONFIG_UNEVICTABLE_LRU=y CONFIG_HAVE_MLOCK=y CONFIG_HAVE_MLOCKED_PAGE_BIT=y +CONFIG_DEFAULT_MMAP_MIN_ADDR=4096 CONFIG_PPC_4K_PAGES=y # CONFIG_PPC_16K_PAGES is not set # CONFIG_PPC_64K_PAGES is not set @@ -374,6 +391,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set # CONFIG_PHONET is not set +# CONFIG_IEEE802154 is not set # CONFIG_NET_SCHED is not set # CONFIG_DCB is not set @@ -391,7 +409,11 @@ CONFIG_WIRELESS=y CONFIG_WIRELESS_OLD_REGULATORY=y # CONFIG_WIRELESS_EXT is not set # CONFIG_LIB80211 is not set -# CONFIG_MAC80211 is not set + +# +# CFG80211 needs to be enabled for MAC80211 +# +CONFIG_MAC80211_DEFAULT_PS_VALUE=0 # CONFIG_WIMAX is not set # CONFIG_RFKILL is not set # CONFIG_NET_9P is not set @@ -507,6 +529,7 @@ CONFIG_MTD_NAND_FSL_ELBC=y CONFIG_OF_DEVICE=y CONFIG_OF_GPIO=y CONFIG_OF_I2C=y +CONFIG_OF_MDIO=y # CONFIG_PARPORT is not set CONFIG_BLK_DEV=y # CONFIG_BLK_DEV_FD is not set @@ -542,7 +565,9 @@ CONFIG_MISC_DEVICES=y # # CONFIG_EEPROM_AT24 is not set # CONFIG_EEPROM_LEGACY is not set +# CONFIG_EEPROM_MAX6875 is not set # CONFIG_EEPROM_93CX6 is not set +# CONFIG_CB710_CORE is not set CONFIG_HAVE_IDE=y # CONFIG_IDE is not set @@ -565,10 +590,6 @@ CONFIG_BLK_DEV_SD=y # CONFIG_BLK_DEV_SR is not set CONFIG_CHR_DEV_SG=y # CONFIG_CHR_DEV_SCH is not set - -# -# Some SCSI devices (e.g. CD jukebox) support multiple LUNs -# # CONFIG_SCSI_MULTI_LUN is not set # CONFIG_SCSI_CONSTANTS is not set # CONFIG_SCSI_LOGGING is not set @@ -586,6 +607,7 @@ CONFIG_SCSI_WAIT_SCAN=m CONFIG_SCSI_LOWLEVEL=y # CONFIG_ISCSI_TCP is not set # CONFIG_SCSI_CXGB3_ISCSI is not set +# CONFIG_SCSI_BNX2_ISCSI is not set # CONFIG_BLK_DEV_3W_XXXX_RAID is not set # CONFIG_SCSI_3W_9XXX is not set # CONFIG_SCSI_ACARD is not set @@ -594,6 +616,7 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_SCSI_AIC7XXX_OLD is not set # CONFIG_SCSI_AIC79XX is not set # CONFIG_SCSI_AIC94XX is not set +# CONFIG_SCSI_MVSAS is not set # CONFIG_SCSI_DPT_I2O is not set # CONFIG_SCSI_ADVANSYS is not set # CONFIG_SCSI_ARCMSR is not set @@ -613,7 +636,6 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_SCSI_IPS is not set # CONFIG_SCSI_INITIO is not set # CONFIG_SCSI_INIA100 is not set -# CONFIG_SCSI_MVSAS is not set # CONFIG_SCSI_STEX is not set # CONFIG_SCSI_SYM53C8XX_2 is not set # CONFIG_SCSI_IPR is not set @@ -697,14 +719,17 @@ CONFIG_ATA_SFF=y # # -# Enable only one of the two stacks, unless you know what you are doing +# You can enable one or both FireWire driver stacks. +# + +# +# See the help texts for more information. # # CONFIG_FIREWIRE is not set # CONFIG_IEEE1394 is not set # CONFIG_I2O is not set # CONFIG_MACINTOSH_DRIVERS is not set CONFIG_NETDEVICES=y -CONFIG_COMPAT_NET_DEV_OPS=y # CONFIG_DUMMY is not set # CONFIG_BONDING is not set # CONFIG_MACVLAN is not set @@ -751,6 +776,7 @@ CONFIG_MII=y # CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set # CONFIG_NET_PCI is not set # CONFIG_B44 is not set +# CONFIG_KS8842 is not set # CONFIG_ATL2 is not set CONFIG_NETDEV_1000=y # CONFIG_ACENIC is not set @@ -770,11 +796,13 @@ CONFIG_NETDEV_1000=y # CONFIG_VIA_VELOCITY is not set # CONFIG_TIGON3 is not set # CONFIG_BNX2 is not set +# CONFIG_CNIC is not set CONFIG_FSL_PQ_MDIO=y CONFIG_GIANFAR=y CONFIG_UCC_GETH=y # CONFIG_UGETH_MAGIC_PACKET is not set # CONFIG_UGETH_TX_ON_DEMAND is not set +# CONFIG_MV643XX_ETH is not set # CONFIG_QLA3XXX is not set # CONFIG_ATL1 is not set # CONFIG_ATL1E is not set @@ -965,13 +993,17 @@ CONFIG_I2C_MPC=y # CONFIG_SENSORS_PCF8574 is not set # CONFIG_PCF8575 is not set # CONFIG_SENSORS_PCA9539 is not set -# CONFIG_SENSORS_MAX6875 is not set # CONFIG_SENSORS_TSL2550 is not set # CONFIG_I2C_DEBUG_CORE is not set # CONFIG_I2C_DEBUG_ALGO is not set # CONFIG_I2C_DEBUG_BUS is not set # CONFIG_I2C_DEBUG_CHIP is not set # CONFIG_SPI is not set + +# +# PPS support +# +# CONFIG_PPS is not set CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y CONFIG_ARCH_REQUIRE_GPIOLIB=y CONFIG_GPIOLIB=y @@ -1050,6 +1082,7 @@ CONFIG_HWMON=y # CONFIG_SENSORS_SMSC47B397 is not set # CONFIG_SENSORS_ADS7828 is not set # CONFIG_SENSORS_THMC50 is not set +# CONFIG_SENSORS_TMP401 is not set # CONFIG_SENSORS_VIA686A is not set # CONFIG_SENSORS_VT1211 is not set # CONFIG_SENSORS_VT8231 is not set @@ -1104,24 +1137,9 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_MFD_WM8400 is not set # CONFIG_MFD_WM8350_I2C is not set # CONFIG_MFD_PCF50633 is not set +# CONFIG_AB3100_CORE is not set # CONFIG_REGULATOR is not set - -# -# Multimedia devices -# - -# -# Multimedia core support -# -# CONFIG_VIDEO_DEV is not set -# CONFIG_DVB_CORE is not set -# CONFIG_VIDEO_MEDIA is not set - -# -# Multimedia drivers -# -CONFIG_DAB=y -# CONFIG_USB_DABUSB is not set +# CONFIG_MEDIA_SUPPORT is not set # # Graphics support @@ -1159,7 +1177,7 @@ CONFIG_HID_BELKIN=y CONFIG_HID_CHERRY=y CONFIG_HID_CHICONY=y CONFIG_HID_CYPRESS=y -# CONFIG_DRAGONRISE_FF is not set +# CONFIG_HID_DRAGONRISE is not set CONFIG_HID_EZKEY=y # CONFIG_HID_KYE is not set CONFIG_HID_GYRATION=y @@ -1176,10 +1194,11 @@ CONFIG_HID_PETALYNX=y CONFIG_HID_SAMSUNG=y CONFIG_HID_SONY=y CONFIG_HID_SUNPLUS=y -# CONFIG_GREENASIA_FF is not set +# CONFIG_HID_GREENASIA is not set +# CONFIG_HID_SMARTJOYPLUS is not set # CONFIG_HID_TOPSEED is not set -CONFIG_THRUSTMASTER_FF=m -CONFIG_ZEROPLUS_FF=m +# CONFIG_HID_THRUSTMASTER is not set +# CONFIG_HID_ZEROPLUS is not set CONFIG_USB_SUPPORT=y CONFIG_USB_ARCH_HAS_HCD=y CONFIG_USB_ARCH_HAS_OHCI=y @@ -1205,6 +1224,7 @@ CONFIG_USB_MON=y # USB Host Controller Drivers # # CONFIG_USB_C67X00_HCD is not set +# CONFIG_USB_XHCI_HCD is not set CONFIG_USB_EHCI_HCD=y CONFIG_USB_EHCI_ROOT_HUB_TT=y # CONFIG_USB_EHCI_TT_NEWSCHED is not set @@ -1291,6 +1311,10 @@ CONFIG_USB_EHCI_HCD_PPC_OF=y # CONFIG_DMADEVICES is not set # CONFIG_AUXDISPLAY is not set # CONFIG_UIO is not set + +# +# TI VLYNQ +# # CONFIG_STAGING is not set # @@ -1310,10 +1334,12 @@ CONFIG_FS_MBCACHE=y # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set -CONFIG_FILE_LOCKING=y # CONFIG_XFS_FS is not set +# CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set # CONFIG_BTRFS_FS is not set +CONFIG_FILE_LOCKING=y +CONFIG_FSNOTIFY=y CONFIG_DNOTIFY=y CONFIG_INOTIFY=y CONFIG_INOTIFY_USER=y @@ -1377,6 +1403,7 @@ CONFIG_NFS_FS=y CONFIG_NFS_V3=y # CONFIG_NFS_V3_ACL is not set CONFIG_NFS_V4=y +# CONFIG_NFS_V4_1 is not set CONFIG_ROOT_NFS=y # CONFIG_NFSD is not set CONFIG_LOCKD=y @@ -1413,7 +1440,46 @@ CONFIG_MSDOS_PARTITION=y # CONFIG_KARMA_PARTITION is not set # CONFIG_EFI_PARTITION is not set # CONFIG_SYSV68_PARTITION is not set -# CONFIG_NLS is not set +CONFIG_NLS=y +CONFIG_NLS_DEFAULT="iso8859-1" +# CONFIG_NLS_CODEPAGE_437 is not set +# CONFIG_NLS_CODEPAGE_737 is not set +# CONFIG_NLS_CODEPAGE_775 is not set +# CONFIG_NLS_CODEPAGE_850 is not set +# CONFIG_NLS_CODEPAGE_852 is not set +# CONFIG_NLS_CODEPAGE_855 is not set +# CONFIG_NLS_CODEPAGE_857 is not set +# CONFIG_NLS_CODEPAGE_860 is not set +# CONFIG_NLS_CODEPAGE_861 is not set +# CONFIG_NLS_CODEPAGE_862 is not set +# CONFIG_NLS_CODEPAGE_863 is not set +# CONFIG_NLS_CODEPAGE_864 is not set +# CONFIG_NLS_CODEPAGE_865 is not set +# CONFIG_NLS_CODEPAGE_866 is not set +# CONFIG_NLS_CODEPAGE_869 is not set +# CONFIG_NLS_CODEPAGE_936 is not set +# CONFIG_NLS_CODEPAGE_950 is not set +# CONFIG_NLS_CODEPAGE_932 is not set +# CONFIG_NLS_CODEPAGE_949 is not set +# CONFIG_NLS_CODEPAGE_874 is not set +# CONFIG_NLS_ISO8859_8 is not set +# CONFIG_NLS_CODEPAGE_1250 is not set +# CONFIG_NLS_CODEPAGE_1251 is not set +# CONFIG_NLS_ASCII is not set +# CONFIG_NLS_ISO8859_1 is not set +# CONFIG_NLS_ISO8859_2 is not set +# CONFIG_NLS_ISO8859_3 is not set +# CONFIG_NLS_ISO8859_4 is not set +# CONFIG_NLS_ISO8859_5 is not set +# CONFIG_NLS_ISO8859_6 is not set +# CONFIG_NLS_ISO8859_7 is not set +# CONFIG_NLS_ISO8859_9 is not set +# CONFIG_NLS_ISO8859_13 is not set +# CONFIG_NLS_ISO8859_14 is not set +# CONFIG_NLS_ISO8859_15 is not set +# CONFIG_NLS_KOI8_R is not set +# CONFIG_NLS_KOI8_U is not set +# CONFIG_NLS_UTF8 is not set # CONFIG_DLM is not set CONFIG_UCC_FAST=y CONFIG_UCC=y @@ -1438,6 +1504,7 @@ CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y CONFIG_HAVE_LMB=y CONFIG_NLATTR=y +CONFIG_GENERIC_ATOMIC64=y # # Kernel hacking @@ -1461,22 +1528,11 @@ CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y CONFIG_HAVE_DYNAMIC_FTRACE=y CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y CONFIG_TRACING_SUPPORT=y - -# -# Tracers -# -# CONFIG_FUNCTION_TRACER is not set -# CONFIG_SCHED_TRACER is not set -# CONFIG_CONTEXT_SWITCH_TRACER is not set -# CONFIG_EVENT_TRACER is not set -# CONFIG_BOOT_TRACER is not set -# CONFIG_TRACE_BRANCH_PROFILING is not set -# CONFIG_STACK_TRACER is not set -# CONFIG_KMEMTRACE is not set -# CONFIG_WORKQUEUE_TRACER is not set -# CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_FTRACE is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y +# CONFIG_PPC_DISABLE_WERROR is not set +CONFIG_PPC_WERROR=y CONFIG_PRINT_STACK_DEPTH=64 # CONFIG_IRQSTACKS is not set # CONFIG_BOOTX_TEXT is not set diff --git a/arch/powerpc/configs/mpc85xx_defconfig b/arch/powerpc/configs/mpc85xx_defconfig index c162724fed4..ada595898af 100644 --- a/arch/powerpc/configs/mpc85xx_defconfig +++ b/arch/powerpc/configs/mpc85xx_defconfig @@ -1,14 +1,14 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.30-rc2 -# Tue Apr 21 15:40:23 2009 +# Linux kernel version: 2.6.31-rc4 +# Wed Jul 29 23:31:55 2009 # # CONFIG_PPC64 is not set # # Processor support # -# CONFIG_6xx is not set +# CONFIG_PPC_BOOK3S_32 is not set CONFIG_PPC_85xx=y # CONFIG_PPC_8xx is not set # CONFIG_40x is not set @@ -34,15 +34,16 @@ CONFIG_GENERIC_TIME=y CONFIG_GENERIC_TIME_VSYSCALL=y CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_GENERIC_HARDIRQS=y +CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set CONFIG_IRQ_PER_CPU=y CONFIG_STACKTRACE_SUPPORT=y CONFIG_HAVE_LATENCYTOP_SUPPORT=y +CONFIG_TRACE_IRQFLAGS_SUPPORT=y CONFIG_LOCKDEP_SUPPORT=y CONFIG_RWSEM_XCHGADD_ALGORITHM=y CONFIG_ARCH_HAS_ILOG2_U32=y CONFIG_GENERIC_HWEIGHT=y -CONFIG_GENERIC_CALIBRATE_DELAY=y CONFIG_GENERIC_FIND_NEXT_BIT=y CONFIG_GENERIC_GPIO=y # CONFIG_ARCH_NO_VIRT_TO_BUS is not set @@ -57,11 +58,13 @@ CONFIG_PPC_UDBG_16550=y # CONFIG_GENERIC_TBSYNC is not set CONFIG_AUDIT_ARCH=y CONFIG_GENERIC_BUG=y +CONFIG_DTC=y CONFIG_DEFAULT_UIMAGE=y # CONFIG_PPC_DCR_NATIVE is not set # CONFIG_PPC_DCR_MMIO is not set CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" +CONFIG_CONSTRUCTORS=y # # General setup @@ -116,7 +119,6 @@ CONFIG_SYSCTL_SYSCALL=y CONFIG_KALLSYMS=y CONFIG_KALLSYMS_ALL=y CONFIG_KALLSYMS_EXTRA_PASS=y -# CONFIG_STRIP_ASM_SYMS is not set CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y @@ -129,9 +131,16 @@ CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y CONFIG_AIO=y +CONFIG_HAVE_PERF_COUNTERS=y + +# +# Performance Counters +# +# CONFIG_PERF_COUNTERS is not set CONFIG_VM_EVENT_COUNTERS=y CONFIG_PCI_QUIRKS=y CONFIG_SLUB_DEBUG=y +# CONFIG_STRIP_ASM_SYMS is not set CONFIG_COMPAT_BRK=y # CONFIG_SLAB is not set CONFIG_SLUB=y @@ -146,6 +155,11 @@ CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_ARCH_TRACEHOOK=y CONFIG_HAVE_CLK=y + +# +# GCOV-based kernel profiling +# +# CONFIG_GCOV_KERNEL is not set # CONFIG_SLOW_WORK is not set # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y @@ -158,7 +172,7 @@ CONFIG_MODULE_FORCE_UNLOAD=y CONFIG_MODVERSIONS=y # CONFIG_MODULE_SRCVERSION_ALL is not set CONFIG_BLOCK=y -CONFIG_LBD=y +CONFIG_LBDAF=y # CONFIG_BLK_DEV_BSG is not set # CONFIG_BLK_DEV_INTEGRITY is not set @@ -191,6 +205,7 @@ CONFIG_MPC8536_DS=y CONFIG_MPC85xx_DS=y CONFIG_SOCRATES=y CONFIG_KSI8560=y +# CONFIG_XES_MPC85xx is not set CONFIG_STX_GP3=y CONFIG_TQM8540=y CONFIG_TQM8541=y @@ -241,7 +256,9 @@ CONFIG_BINFMT_ELF=y # CONFIG_HAVE_AOUT is not set CONFIG_BINFMT_MISC=m CONFIG_MATH_EMULATION=y -# CONFIG_IOMMU_HELPER is not set +CONFIG_IOMMU_HELPER=y +CONFIG_SWIOTLB=y +CONFIG_PPC_NEED_DMA_SYNC_OPS=y CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y CONFIG_ARCH_HAS_WALK_MEMORY=y CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y @@ -260,9 +277,9 @@ CONFIG_MIGRATION=y CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y -CONFIG_UNEVICTABLE_LRU=y CONFIG_HAVE_MLOCK=y CONFIG_HAVE_MLOCKED_PAGE_BIT=y +CONFIG_DEFAULT_MMAP_MIN_ADDR=4096 CONFIG_PPC_4K_PAGES=y # CONFIG_PPC_16K_PAGES is not set # CONFIG_PPC_64K_PAGES is not set @@ -296,7 +313,8 @@ CONFIG_ARCH_SUPPORTS_MSI=y # CONFIG_PCI_IOV is not set # CONFIG_PCCARD is not set # CONFIG_HOTPLUG_PCI is not set -# CONFIG_HAS_RAPIDIO is not set +CONFIG_HAS_RAPIDIO=y +# CONFIG_RAPIDIO is not set # # Advanced setup @@ -406,6 +424,7 @@ CONFIG_SCTP_HMAC_MD5=y # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set # CONFIG_PHONET is not set +# CONFIG_IEEE802154 is not set # CONFIG_NET_SCHED is not set # CONFIG_DCB is not set @@ -424,7 +443,11 @@ CONFIG_WIRELESS=y CONFIG_WIRELESS_OLD_REGULATORY=y # CONFIG_WIRELESS_EXT is not set # CONFIG_LIB80211 is not set -# CONFIG_MAC80211 is not set + +# +# CFG80211 needs to be enabled for MAC80211 +# +CONFIG_MAC80211_DEFAULT_PS_VALUE=0 # CONFIG_WIMAX is not set # CONFIG_RFKILL is not set # CONFIG_NET_9P is not set @@ -450,6 +473,7 @@ CONFIG_EXTRA_FIRMWARE="" CONFIG_OF_DEVICE=y CONFIG_OF_GPIO=y CONFIG_OF_I2C=y +CONFIG_OF_MDIO=y # CONFIG_PARPORT is not set CONFIG_BLK_DEV=y # CONFIG_BLK_DEV_FD is not set @@ -485,7 +509,9 @@ CONFIG_MISC_DEVICES=y # # CONFIG_EEPROM_AT24 is not set CONFIG_EEPROM_LEGACY=y +# CONFIG_EEPROM_MAX6875 is not set # CONFIG_EEPROM_93CX6 is not set +# CONFIG_CB710_CORE is not set CONFIG_HAVE_IDE=y # CONFIG_IDE is not set @@ -509,10 +535,6 @@ CONFIG_BLK_DEV_SR=y # CONFIG_BLK_DEV_SR_VENDOR is not set CONFIG_CHR_DEV_SG=y # CONFIG_CHR_DEV_SCH is not set - -# -# Some SCSI devices (e.g. CD jukebox) support multiple LUNs -# CONFIG_SCSI_MULTI_LUN=y # CONFIG_SCSI_CONSTANTS is not set CONFIG_SCSI_LOGGING=y @@ -530,6 +552,7 @@ CONFIG_SCSI_WAIT_SCAN=m CONFIG_SCSI_LOWLEVEL=y # CONFIG_ISCSI_TCP is not set # CONFIG_SCSI_CXGB3_ISCSI is not set +# CONFIG_SCSI_BNX2_ISCSI is not set # CONFIG_BLK_DEV_3W_XXXX_RAID is not set # CONFIG_SCSI_3W_9XXX is not set # CONFIG_SCSI_ACARD is not set @@ -538,6 +561,7 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_SCSI_AIC7XXX_OLD is not set # CONFIG_SCSI_AIC79XX is not set # CONFIG_SCSI_AIC94XX is not set +# CONFIG_SCSI_MVSAS is not set # CONFIG_SCSI_DPT_I2O is not set # CONFIG_SCSI_ADVANSYS is not set # CONFIG_SCSI_ARCMSR is not set @@ -557,7 +581,6 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_SCSI_IPS is not set # CONFIG_SCSI_INITIO is not set # CONFIG_SCSI_INIA100 is not set -# CONFIG_SCSI_MVSAS is not set # CONFIG_SCSI_STEX is not set # CONFIG_SCSI_SYM53C8XX_2 is not set # CONFIG_SCSI_IPR is not set @@ -641,14 +664,17 @@ CONFIG_PATA_ALI=y # # -# Enable only one of the two stacks, unless you know what you are doing +# You can enable one or both FireWire driver stacks. +# + +# +# See the help texts for more information. # # CONFIG_FIREWIRE is not set # CONFIG_IEEE1394 is not set # CONFIG_I2O is not set # CONFIG_MACINTOSH_DRIVERS is not set CONFIG_NETDEVICES=y -CONFIG_COMPAT_NET_DEV_OPS=y CONFIG_DUMMY=y # CONFIG_BONDING is not set # CONFIG_MACVLAN is not set @@ -695,6 +721,7 @@ CONFIG_MII=y # CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set # CONFIG_NET_PCI is not set # CONFIG_B44 is not set +# CONFIG_KS8842 is not set # CONFIG_ATL2 is not set CONFIG_FS_ENET=y CONFIG_FS_ENET_HAS_SCC=y @@ -718,11 +745,13 @@ CONFIG_NETDEV_1000=y # CONFIG_VIA_VELOCITY is not set # CONFIG_TIGON3 is not set # CONFIG_BNX2 is not set +# CONFIG_CNIC is not set CONFIG_FSL_PQ_MDIO=y CONFIG_GIANFAR=y CONFIG_UCC_GETH=y # CONFIG_UGETH_MAGIC_PACKET is not set # CONFIG_UGETH_TX_ON_DEMAND is not set +# CONFIG_MV643XX_ETH is not set # CONFIG_QLA3XXX is not set # CONFIG_ATL1 is not set # CONFIG_ATL1E is not set @@ -897,6 +926,7 @@ CONFIG_I2C_HELPER_AUTO=y # I2C system bus drivers (mostly embedded / system-on-chip) # CONFIG_I2C_CPM=m +# CONFIG_I2C_DESIGNWARE is not set # CONFIG_I2C_GPIO is not set CONFIG_I2C_MPC=y # CONFIG_I2C_OCORES is not set @@ -927,13 +957,17 @@ CONFIG_I2C_MPC=y # CONFIG_SENSORS_PCF8574 is not set # CONFIG_PCF8575 is not set # CONFIG_SENSORS_PCA9539 is not set -# CONFIG_SENSORS_MAX6875 is not set # CONFIG_SENSORS_TSL2550 is not set # CONFIG_I2C_DEBUG_CORE is not set # CONFIG_I2C_DEBUG_ALGO is not set # CONFIG_I2C_DEBUG_BUS is not set # CONFIG_I2C_DEBUG_CHIP is not set # CONFIG_SPI is not set + +# +# PPS support +# +# CONFIG_PPS is not set CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y CONFIG_ARCH_REQUIRE_GPIOLIB=y CONFIG_GPIOLIB=y @@ -987,76 +1021,9 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_MFD_WM8400 is not set # CONFIG_MFD_WM8350_I2C is not set # CONFIG_MFD_PCF50633 is not set +# CONFIG_AB3100_CORE is not set # CONFIG_REGULATOR is not set - -# -# Multimedia devices -# - -# -# Multimedia core support -# -# CONFIG_VIDEO_DEV is not set -CONFIG_DVB_CORE=m -CONFIG_VIDEO_MEDIA=m - -# -# Multimedia drivers -# -# CONFIG_MEDIA_ATTACH is not set -CONFIG_MEDIA_TUNER=m -# CONFIG_MEDIA_TUNER_CUSTOMISE is not set -CONFIG_MEDIA_TUNER_SIMPLE=m -CONFIG_MEDIA_TUNER_TDA8290=m -CONFIG_MEDIA_TUNER_TDA9887=m -CONFIG_MEDIA_TUNER_TEA5761=m -CONFIG_MEDIA_TUNER_TEA5767=m -CONFIG_MEDIA_TUNER_MT20XX=m -CONFIG_MEDIA_TUNER_XC2028=m -CONFIG_MEDIA_TUNER_XC5000=m -CONFIG_MEDIA_TUNER_MC44S803=m -# CONFIG_DVB_DYNAMIC_MINORS is not set -CONFIG_DVB_CAPTURE_DRIVERS=y - -# -# Supported SAA7146 based PCI Adapters -# -# CONFIG_TTPCI_EEPROM is not set -# CONFIG_DVB_BUDGET_CORE is not set - -# -# Supported USB Adapters -# -# CONFIG_DVB_USB is not set -# CONFIG_DVB_TTUSB_BUDGET is not set -# CONFIG_DVB_TTUSB_DEC is not set -# CONFIG_DVB_SIANO_SMS1XXX is not set - -# -# Supported FlexCopII (B2C2) Adapters -# -# CONFIG_DVB_B2C2_FLEXCOP is not set - -# -# Supported BT878 Adapters -# - -# -# Supported Pluto2 Adapters -# -# CONFIG_DVB_PLUTO2 is not set - -# -# Supported SDMC DM1105 Adapters -# -# CONFIG_DVB_DM1105 is not set - -# -# Supported DVB Frontends -# -# CONFIG_DVB_FE_CUSTOMISE is not set -CONFIG_DAB=y -# CONFIG_USB_DABUSB is not set +# CONFIG_MEDIA_SUPPORT is not set # # Graphics support @@ -1096,6 +1063,11 @@ CONFIG_SND_VERBOSE_PROCFS=y # CONFIG_SND_VERBOSE_PRINTK is not set # CONFIG_SND_DEBUG is not set CONFIG_SND_VMASTER=y +# CONFIG_SND_RAWMIDI_SEQ is not set +# CONFIG_SND_OPL3_LIB_SEQ is not set +# CONFIG_SND_OPL4_LIB_SEQ is not set +# CONFIG_SND_SBAWE_SEQ is not set +# CONFIG_SND_EMU10K1_SEQ is not set CONFIG_SND_AC97_CODEC=y CONFIG_SND_DRIVERS=y # CONFIG_SND_DUMMY is not set @@ -1122,6 +1094,7 @@ CONFIG_SND_PCI=y # CONFIG_SND_CS4281 is not set # CONFIG_SND_CS46XX is not set # CONFIG_SND_CS5530 is not set +# CONFIG_SND_CTXFI is not set # CONFIG_SND_DARLA20 is not set # CONFIG_SND_GINA20 is not set # CONFIG_SND_LAYLA20 is not set @@ -1152,6 +1125,7 @@ CONFIG_SND_PCI=y CONFIG_SND_INTEL8X0=y # CONFIG_SND_INTEL8X0M is not set # CONFIG_SND_KORG1212 is not set +# CONFIG_SND_LX6464ES is not set # CONFIG_SND_MAESTRO3 is not set # CONFIG_SND_MIXART is not set # CONFIG_SND_NM256 is not set @@ -1196,7 +1170,7 @@ CONFIG_HID_BELKIN=y CONFIG_HID_CHERRY=y CONFIG_HID_CHICONY=y CONFIG_HID_CYPRESS=y -# CONFIG_DRAGONRISE_FF is not set +# CONFIG_HID_DRAGONRISE is not set CONFIG_HID_EZKEY=y # CONFIG_HID_KYE is not set CONFIG_HID_GYRATION=y @@ -1213,10 +1187,11 @@ CONFIG_HID_PETALYNX=y CONFIG_HID_SAMSUNG=y CONFIG_HID_SONY=y CONFIG_HID_SUNPLUS=y -# CONFIG_GREENASIA_FF is not set +# CONFIG_HID_GREENASIA is not set +# CONFIG_HID_SMARTJOYPLUS is not set # CONFIG_HID_TOPSEED is not set -CONFIG_THRUSTMASTER_FF=m -CONFIG_ZEROPLUS_FF=m +# CONFIG_HID_THRUSTMASTER is not set +# CONFIG_HID_ZEROPLUS is not set CONFIG_USB_SUPPORT=y CONFIG_USB_ARCH_HAS_HCD=y CONFIG_USB_ARCH_HAS_OHCI=y @@ -1242,6 +1217,7 @@ CONFIG_USB_MON=y # USB Host Controller Drivers # # CONFIG_USB_C67X00_HCD is not set +# CONFIG_USB_XHCI_HCD is not set CONFIG_USB_EHCI_HCD=y CONFIG_USB_EHCI_ROOT_HUB_TT=y # CONFIG_USB_EHCI_TT_NEWSCHED is not set @@ -1251,9 +1227,9 @@ CONFIG_USB_EHCI_HCD_PPC_OF=y # CONFIG_USB_ISP116X_HCD is not set # CONFIG_USB_ISP1760_HCD is not set CONFIG_USB_OHCI_HCD=y -CONFIG_USB_OHCI_HCD_PPC_OF=y CONFIG_USB_OHCI_HCD_PPC_OF_BE=y CONFIG_USB_OHCI_HCD_PPC_OF_LE=y +CONFIG_USB_OHCI_HCD_PPC_OF=y CONFIG_USB_OHCI_HCD_PCI=y CONFIG_USB_OHCI_BIG_ENDIAN_DESC=y CONFIG_USB_OHCI_BIG_ENDIAN_MMIO=y @@ -1352,8 +1328,6 @@ CONFIG_EDAC=y # CONFIG_EDAC_DEBUG is not set CONFIG_EDAC_MM_EDAC=y CONFIG_EDAC_MPC85XX=y -# CONFIG_EDAC_AMD8131 is not set -# CONFIG_EDAC_AMD8111 is not set CONFIG_RTC_LIB=y CONFIG_RTC_CLASS=y CONFIG_RTC_HCTOSYS=y @@ -1385,6 +1359,7 @@ CONFIG_RTC_INTF_DEV=y # CONFIG_RTC_DRV_S35390A is not set # CONFIG_RTC_DRV_FM3130 is not set # CONFIG_RTC_DRV_RX8581 is not set +# CONFIG_RTC_DRV_RX8025 is not set # # SPI RTC drivers @@ -1425,6 +1400,10 @@ CONFIG_DMA_ENGINE=y # CONFIG_DMATEST is not set # CONFIG_AUXDISPLAY is not set # CONFIG_UIO is not set + +# +# TI VLYNQ +# # CONFIG_STAGING is not set # @@ -1445,11 +1424,12 @@ CONFIG_FS_MBCACHE=y # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set -CONFIG_FILE_LOCKING=y # CONFIG_XFS_FS is not set # CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set # CONFIG_BTRFS_FS is not set +CONFIG_FILE_LOCKING=y +CONFIG_FSNOTIFY=y CONFIG_DNOTIFY=y CONFIG_INOTIFY=y CONFIG_INOTIFY_USER=y @@ -1524,6 +1504,7 @@ CONFIG_NFS_FS=y CONFIG_NFS_V3=y # CONFIG_NFS_V3_ACL is not set CONFIG_NFS_V4=y +# CONFIG_NFS_V4_1 is not set CONFIG_ROOT_NFS=y CONFIG_NFSD=y # CONFIG_NFSD_V3 is not set @@ -1628,6 +1609,7 @@ CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y CONFIG_HAVE_LMB=y CONFIG_NLATTR=y +CONFIG_GENERIC_ATOMIC64=y # # Kernel hacking @@ -1658,6 +1640,9 @@ CONFIG_SCHED_DEBUG=y # CONFIG_RT_MUTEX_TESTER is not set # CONFIG_DEBUG_SPINLOCK is not set # CONFIG_DEBUG_MUTEXES is not set +# CONFIG_DEBUG_LOCK_ALLOC is not set +# CONFIG_PROVE_LOCKING is not set +# CONFIG_LOCK_STAT is not set # CONFIG_DEBUG_SPINLOCK_SLEEP is not set # CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set # CONFIG_DEBUG_KOBJECT is not set @@ -1670,7 +1655,6 @@ CONFIG_DEBUG_INFO=y # CONFIG_DEBUG_LIST is not set # CONFIG_DEBUG_SG is not set # CONFIG_DEBUG_NOTIFIERS is not set -# CONFIG_BOOT_PRINTK_DELAY is not set # CONFIG_RCU_TORTURE_TEST is not set # CONFIG_RCU_CPU_STALL_DETECTOR is not set # CONFIG_BACKTRACE_SELF_TEST is not set @@ -1684,16 +1668,15 @@ CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y CONFIG_HAVE_DYNAMIC_FTRACE=y CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y CONFIG_TRACING_SUPPORT=y - -# -# Tracers -# +CONFIG_FTRACE=y # CONFIG_FUNCTION_TRACER is not set +# CONFIG_IRQSOFF_TRACER is not set # CONFIG_SCHED_TRACER is not set -# CONFIG_CONTEXT_SWITCH_TRACER is not set -# CONFIG_EVENT_TRACER is not set +# CONFIG_ENABLE_DEFAULT_TRACERS is not set # CONFIG_BOOT_TRACER is not set -# CONFIG_TRACE_BRANCH_PROFILING is not set +CONFIG_BRANCH_PROFILE_NONE=y +# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set +# CONFIG_PROFILE_ALL_BRANCHES is not set # CONFIG_STACK_TRACER is not set # CONFIG_KMEMTRACE is not set # CONFIG_WORKQUEUE_TRACER is not set @@ -1702,9 +1685,13 @@ CONFIG_TRACING_SUPPORT=y # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y # CONFIG_KGDB is not set +# CONFIG_KMEMCHECK is not set +# CONFIG_PPC_DISABLE_WERROR is not set +CONFIG_PPC_WERROR=y CONFIG_PRINT_STACK_DEPTH=64 # CONFIG_DEBUG_STACKOVERFLOW is not set # CONFIG_DEBUG_STACK_USAGE is not set +# CONFIG_PPC_EMULATED_STATS is not set # CONFIG_CODE_PATCHING_SELFTEST is not set # CONFIG_FTR_FIXUP_SELFTEST is not set # CONFIG_MSI_BITMAP_SELFTEST is not set diff --git a/arch/powerpc/configs/mpc85xx_smp_defconfig b/arch/powerpc/configs/mpc85xx_smp_defconfig index 1aa1c508d60..db082ce5a1c 100644 --- a/arch/powerpc/configs/mpc85xx_smp_defconfig +++ b/arch/powerpc/configs/mpc85xx_smp_defconfig @@ -1,14 +1,14 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.30-rc2 -# Tue Apr 21 15:41:18 2009 +# Linux kernel version: 2.6.31-rc4 +# Wed Jul 29 23:31:56 2009 # # CONFIG_PPC64 is not set # # Processor support # -# CONFIG_6xx is not set +# CONFIG_PPC_BOOK3S_32 is not set CONFIG_PPC_85xx=y # CONFIG_PPC_8xx is not set # CONFIG_40x is not set @@ -35,15 +35,16 @@ CONFIG_GENERIC_TIME=y CONFIG_GENERIC_TIME_VSYSCALL=y CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_GENERIC_HARDIRQS=y +CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set CONFIG_IRQ_PER_CPU=y CONFIG_STACKTRACE_SUPPORT=y CONFIG_HAVE_LATENCYTOP_SUPPORT=y +CONFIG_TRACE_IRQFLAGS_SUPPORT=y CONFIG_LOCKDEP_SUPPORT=y CONFIG_RWSEM_XCHGADD_ALGORITHM=y CONFIG_ARCH_HAS_ILOG2_U32=y CONFIG_GENERIC_HWEIGHT=y -CONFIG_GENERIC_CALIBRATE_DELAY=y CONFIG_GENERIC_FIND_NEXT_BIT=y CONFIG_GENERIC_GPIO=y # CONFIG_ARCH_NO_VIRT_TO_BUS is not set @@ -58,11 +59,13 @@ CONFIG_PPC_UDBG_16550=y CONFIG_GENERIC_TBSYNC=y CONFIG_AUDIT_ARCH=y CONFIG_GENERIC_BUG=y +CONFIG_DTC=y CONFIG_DEFAULT_UIMAGE=y # CONFIG_PPC_DCR_NATIVE is not set # CONFIG_PPC_DCR_MMIO is not set CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" +CONFIG_CONSTRUCTORS=y # # General setup @@ -117,7 +120,6 @@ CONFIG_SYSCTL_SYSCALL=y CONFIG_KALLSYMS=y CONFIG_KALLSYMS_ALL=y CONFIG_KALLSYMS_EXTRA_PASS=y -# CONFIG_STRIP_ASM_SYMS is not set CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y @@ -130,9 +132,16 @@ CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y CONFIG_AIO=y +CONFIG_HAVE_PERF_COUNTERS=y + +# +# Performance Counters +# +# CONFIG_PERF_COUNTERS is not set CONFIG_VM_EVENT_COUNTERS=y CONFIG_PCI_QUIRKS=y CONFIG_SLUB_DEBUG=y +# CONFIG_STRIP_ASM_SYMS is not set CONFIG_COMPAT_BRK=y # CONFIG_SLAB is not set CONFIG_SLUB=y @@ -148,6 +157,11 @@ CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_ARCH_TRACEHOOK=y CONFIG_USE_GENERIC_SMP_HELPERS=y CONFIG_HAVE_CLK=y + +# +# GCOV-based kernel profiling +# +# CONFIG_GCOV_KERNEL is not set # CONFIG_SLOW_WORK is not set # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y @@ -161,7 +175,7 @@ CONFIG_MODVERSIONS=y # CONFIG_MODULE_SRCVERSION_ALL is not set CONFIG_STOP_MACHINE=y CONFIG_BLOCK=y -CONFIG_LBD=y +CONFIG_LBDAF=y # CONFIG_BLK_DEV_BSG is not set # CONFIG_BLK_DEV_INTEGRITY is not set @@ -194,6 +208,7 @@ CONFIG_MPC8536_DS=y CONFIG_MPC85xx_DS=y CONFIG_SOCRATES=y CONFIG_KSI8560=y +# CONFIG_XES_MPC85xx is not set CONFIG_STX_GP3=y CONFIG_TQM8540=y CONFIG_TQM8541=y @@ -244,7 +259,9 @@ CONFIG_BINFMT_ELF=y # CONFIG_HAVE_AOUT is not set CONFIG_BINFMT_MISC=m CONFIG_MATH_EMULATION=y -# CONFIG_IOMMU_HELPER is not set +CONFIG_IOMMU_HELPER=y +CONFIG_SWIOTLB=y +CONFIG_PPC_NEED_DMA_SYNC_OPS=y CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y CONFIG_ARCH_HAS_WALK_MEMORY=y CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y @@ -264,9 +281,9 @@ CONFIG_MIGRATION=y CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y -CONFIG_UNEVICTABLE_LRU=y CONFIG_HAVE_MLOCK=y CONFIG_HAVE_MLOCKED_PAGE_BIT=y +CONFIG_DEFAULT_MMAP_MIN_ADDR=4096 CONFIG_PPC_4K_PAGES=y # CONFIG_PPC_16K_PAGES is not set # CONFIG_PPC_64K_PAGES is not set @@ -300,7 +317,8 @@ CONFIG_ARCH_SUPPORTS_MSI=y # CONFIG_PCI_IOV is not set # CONFIG_PCCARD is not set # CONFIG_HOTPLUG_PCI is not set -# CONFIG_HAS_RAPIDIO is not set +CONFIG_HAS_RAPIDIO=y +# CONFIG_RAPIDIO is not set # # Advanced setup @@ -410,6 +428,7 @@ CONFIG_SCTP_HMAC_MD5=y # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set # CONFIG_PHONET is not set +# CONFIG_IEEE802154 is not set # CONFIG_NET_SCHED is not set # CONFIG_DCB is not set @@ -428,7 +447,11 @@ CONFIG_WIRELESS=y CONFIG_WIRELESS_OLD_REGULATORY=y # CONFIG_WIRELESS_EXT is not set # CONFIG_LIB80211 is not set -# CONFIG_MAC80211 is not set + +# +# CFG80211 needs to be enabled for MAC80211 +# +CONFIG_MAC80211_DEFAULT_PS_VALUE=0 # CONFIG_WIMAX is not set # CONFIG_RFKILL is not set # CONFIG_NET_9P is not set @@ -454,6 +477,7 @@ CONFIG_EXTRA_FIRMWARE="" CONFIG_OF_DEVICE=y CONFIG_OF_GPIO=y CONFIG_OF_I2C=y +CONFIG_OF_MDIO=y # CONFIG_PARPORT is not set CONFIG_BLK_DEV=y # CONFIG_BLK_DEV_FD is not set @@ -489,7 +513,9 @@ CONFIG_MISC_DEVICES=y # # CONFIG_EEPROM_AT24 is not set CONFIG_EEPROM_LEGACY=y +# CONFIG_EEPROM_MAX6875 is not set # CONFIG_EEPROM_93CX6 is not set +# CONFIG_CB710_CORE is not set CONFIG_HAVE_IDE=y # CONFIG_IDE is not set @@ -513,10 +539,6 @@ CONFIG_BLK_DEV_SR=y # CONFIG_BLK_DEV_SR_VENDOR is not set CONFIG_CHR_DEV_SG=y # CONFIG_CHR_DEV_SCH is not set - -# -# Some SCSI devices (e.g. CD jukebox) support multiple LUNs -# CONFIG_SCSI_MULTI_LUN=y # CONFIG_SCSI_CONSTANTS is not set CONFIG_SCSI_LOGGING=y @@ -534,6 +556,7 @@ CONFIG_SCSI_WAIT_SCAN=m CONFIG_SCSI_LOWLEVEL=y # CONFIG_ISCSI_TCP is not set # CONFIG_SCSI_CXGB3_ISCSI is not set +# CONFIG_SCSI_BNX2_ISCSI is not set # CONFIG_BLK_DEV_3W_XXXX_RAID is not set # CONFIG_SCSI_3W_9XXX is not set # CONFIG_SCSI_ACARD is not set @@ -542,6 +565,7 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_SCSI_AIC7XXX_OLD is not set # CONFIG_SCSI_AIC79XX is not set # CONFIG_SCSI_AIC94XX is not set +# CONFIG_SCSI_MVSAS is not set # CONFIG_SCSI_DPT_I2O is not set # CONFIG_SCSI_ADVANSYS is not set # CONFIG_SCSI_ARCMSR is not set @@ -561,7 +585,6 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_SCSI_IPS is not set # CONFIG_SCSI_INITIO is not set # CONFIG_SCSI_INIA100 is not set -# CONFIG_SCSI_MVSAS is not set # CONFIG_SCSI_STEX is not set # CONFIG_SCSI_SYM53C8XX_2 is not set # CONFIG_SCSI_IPR is not set @@ -645,14 +668,17 @@ CONFIG_PATA_ALI=y # # -# Enable only one of the two stacks, unless you know what you are doing +# You can enable one or both FireWire driver stacks. +# + +# +# See the help texts for more information. # # CONFIG_FIREWIRE is not set # CONFIG_IEEE1394 is not set # CONFIG_I2O is not set # CONFIG_MACINTOSH_DRIVERS is not set CONFIG_NETDEVICES=y -CONFIG_COMPAT_NET_DEV_OPS=y CONFIG_DUMMY=y # CONFIG_BONDING is not set # CONFIG_MACVLAN is not set @@ -699,6 +725,7 @@ CONFIG_MII=y # CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set # CONFIG_NET_PCI is not set # CONFIG_B44 is not set +# CONFIG_KS8842 is not set # CONFIG_ATL2 is not set CONFIG_FS_ENET=y CONFIG_FS_ENET_HAS_SCC=y @@ -722,11 +749,13 @@ CONFIG_NETDEV_1000=y # CONFIG_VIA_VELOCITY is not set # CONFIG_TIGON3 is not set # CONFIG_BNX2 is not set +# CONFIG_CNIC is not set CONFIG_FSL_PQ_MDIO=y CONFIG_GIANFAR=y CONFIG_UCC_GETH=y # CONFIG_UGETH_MAGIC_PACKET is not set # CONFIG_UGETH_TX_ON_DEMAND is not set +# CONFIG_MV643XX_ETH is not set # CONFIG_QLA3XXX is not set # CONFIG_ATL1 is not set # CONFIG_ATL1E is not set @@ -901,6 +930,7 @@ CONFIG_I2C_HELPER_AUTO=y # I2C system bus drivers (mostly embedded / system-on-chip) # CONFIG_I2C_CPM=m +# CONFIG_I2C_DESIGNWARE is not set # CONFIG_I2C_GPIO is not set CONFIG_I2C_MPC=y # CONFIG_I2C_OCORES is not set @@ -931,13 +961,17 @@ CONFIG_I2C_MPC=y # CONFIG_SENSORS_PCF8574 is not set # CONFIG_PCF8575 is not set # CONFIG_SENSORS_PCA9539 is not set -# CONFIG_SENSORS_MAX6875 is not set # CONFIG_SENSORS_TSL2550 is not set # CONFIG_I2C_DEBUG_CORE is not set # CONFIG_I2C_DEBUG_ALGO is not set # CONFIG_I2C_DEBUG_BUS is not set # CONFIG_I2C_DEBUG_CHIP is not set # CONFIG_SPI is not set + +# +# PPS support +# +# CONFIG_PPS is not set CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y CONFIG_ARCH_REQUIRE_GPIOLIB=y CONFIG_GPIOLIB=y @@ -991,76 +1025,9 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_MFD_WM8400 is not set # CONFIG_MFD_WM8350_I2C is not set # CONFIG_MFD_PCF50633 is not set +# CONFIG_AB3100_CORE is not set # CONFIG_REGULATOR is not set - -# -# Multimedia devices -# - -# -# Multimedia core support -# -# CONFIG_VIDEO_DEV is not set -CONFIG_DVB_CORE=m -CONFIG_VIDEO_MEDIA=m - -# -# Multimedia drivers -# -# CONFIG_MEDIA_ATTACH is not set -CONFIG_MEDIA_TUNER=m -# CONFIG_MEDIA_TUNER_CUSTOMISE is not set -CONFIG_MEDIA_TUNER_SIMPLE=m -CONFIG_MEDIA_TUNER_TDA8290=m -CONFIG_MEDIA_TUNER_TDA9887=m -CONFIG_MEDIA_TUNER_TEA5761=m -CONFIG_MEDIA_TUNER_TEA5767=m -CONFIG_MEDIA_TUNER_MT20XX=m -CONFIG_MEDIA_TUNER_XC2028=m -CONFIG_MEDIA_TUNER_XC5000=m -CONFIG_MEDIA_TUNER_MC44S803=m -# CONFIG_DVB_DYNAMIC_MINORS is not set -CONFIG_DVB_CAPTURE_DRIVERS=y - -# -# Supported SAA7146 based PCI Adapters -# -# CONFIG_TTPCI_EEPROM is not set -# CONFIG_DVB_BUDGET_CORE is not set - -# -# Supported USB Adapters -# -# CONFIG_DVB_USB is not set -# CONFIG_DVB_TTUSB_BUDGET is not set -# CONFIG_DVB_TTUSB_DEC is not set -# CONFIG_DVB_SIANO_SMS1XXX is not set - -# -# Supported FlexCopII (B2C2) Adapters -# -# CONFIG_DVB_B2C2_FLEXCOP is not set - -# -# Supported BT878 Adapters -# - -# -# Supported Pluto2 Adapters -# -# CONFIG_DVB_PLUTO2 is not set - -# -# Supported SDMC DM1105 Adapters -# -# CONFIG_DVB_DM1105 is not set - -# -# Supported DVB Frontends -# -# CONFIG_DVB_FE_CUSTOMISE is not set -CONFIG_DAB=y -# CONFIG_USB_DABUSB is not set +# CONFIG_MEDIA_SUPPORT is not set # # Graphics support @@ -1100,6 +1067,11 @@ CONFIG_SND_VERBOSE_PROCFS=y # CONFIG_SND_VERBOSE_PRINTK is not set # CONFIG_SND_DEBUG is not set CONFIG_SND_VMASTER=y +# CONFIG_SND_RAWMIDI_SEQ is not set +# CONFIG_SND_OPL3_LIB_SEQ is not set +# CONFIG_SND_OPL4_LIB_SEQ is not set +# CONFIG_SND_SBAWE_SEQ is not set +# CONFIG_SND_EMU10K1_SEQ is not set CONFIG_SND_AC97_CODEC=y CONFIG_SND_DRIVERS=y # CONFIG_SND_DUMMY is not set @@ -1126,6 +1098,7 @@ CONFIG_SND_PCI=y # CONFIG_SND_CS4281 is not set # CONFIG_SND_CS46XX is not set # CONFIG_SND_CS5530 is not set +# CONFIG_SND_CTXFI is not set # CONFIG_SND_DARLA20 is not set # CONFIG_SND_GINA20 is not set # CONFIG_SND_LAYLA20 is not set @@ -1156,6 +1129,7 @@ CONFIG_SND_PCI=y CONFIG_SND_INTEL8X0=y # CONFIG_SND_INTEL8X0M is not set # CONFIG_SND_KORG1212 is not set +# CONFIG_SND_LX6464ES is not set # CONFIG_SND_MAESTRO3 is not set # CONFIG_SND_MIXART is not set # CONFIG_SND_NM256 is not set @@ -1200,7 +1174,7 @@ CONFIG_HID_BELKIN=y CONFIG_HID_CHERRY=y CONFIG_HID_CHICONY=y CONFIG_HID_CYPRESS=y -# CONFIG_DRAGONRISE_FF is not set +# CONFIG_HID_DRAGONRISE is not set CONFIG_HID_EZKEY=y # CONFIG_HID_KYE is not set CONFIG_HID_GYRATION=y @@ -1217,10 +1191,11 @@ CONFIG_HID_PETALYNX=y CONFIG_HID_SAMSUNG=y CONFIG_HID_SONY=y CONFIG_HID_SUNPLUS=y -# CONFIG_GREENASIA_FF is not set +# CONFIG_HID_GREENASIA is not set +# CONFIG_HID_SMARTJOYPLUS is not set # CONFIG_HID_TOPSEED is not set -CONFIG_THRUSTMASTER_FF=m -CONFIG_ZEROPLUS_FF=m +# CONFIG_HID_THRUSTMASTER is not set +# CONFIG_HID_ZEROPLUS is not set CONFIG_USB_SUPPORT=y CONFIG_USB_ARCH_HAS_HCD=y CONFIG_USB_ARCH_HAS_OHCI=y @@ -1246,6 +1221,7 @@ CONFIG_USB_MON=y # USB Host Controller Drivers # # CONFIG_USB_C67X00_HCD is not set +# CONFIG_USB_XHCI_HCD is not set CONFIG_USB_EHCI_HCD=y CONFIG_USB_EHCI_ROOT_HUB_TT=y # CONFIG_USB_EHCI_TT_NEWSCHED is not set @@ -1255,9 +1231,9 @@ CONFIG_USB_EHCI_HCD_PPC_OF=y # CONFIG_USB_ISP116X_HCD is not set # CONFIG_USB_ISP1760_HCD is not set CONFIG_USB_OHCI_HCD=y -CONFIG_USB_OHCI_HCD_PPC_OF=y CONFIG_USB_OHCI_HCD_PPC_OF_BE=y CONFIG_USB_OHCI_HCD_PPC_OF_LE=y +CONFIG_USB_OHCI_HCD_PPC_OF=y CONFIG_USB_OHCI_HCD_PCI=y CONFIG_USB_OHCI_BIG_ENDIAN_DESC=y CONFIG_USB_OHCI_BIG_ENDIAN_MMIO=y @@ -1356,8 +1332,6 @@ CONFIG_EDAC=y # CONFIG_EDAC_DEBUG is not set CONFIG_EDAC_MM_EDAC=y CONFIG_EDAC_MPC85XX=y -# CONFIG_EDAC_AMD8131 is not set -# CONFIG_EDAC_AMD8111 is not set CONFIG_RTC_LIB=y CONFIG_RTC_CLASS=y CONFIG_RTC_HCTOSYS=y @@ -1389,6 +1363,7 @@ CONFIG_RTC_INTF_DEV=y # CONFIG_RTC_DRV_S35390A is not set # CONFIG_RTC_DRV_FM3130 is not set # CONFIG_RTC_DRV_RX8581 is not set +# CONFIG_RTC_DRV_RX8025 is not set # # SPI RTC drivers @@ -1429,6 +1404,10 @@ CONFIG_DMA_ENGINE=y # CONFIG_DMATEST is not set # CONFIG_AUXDISPLAY is not set # CONFIG_UIO is not set + +# +# TI VLYNQ +# # CONFIG_STAGING is not set # @@ -1449,11 +1428,12 @@ CONFIG_FS_MBCACHE=y # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set -CONFIG_FILE_LOCKING=y # CONFIG_XFS_FS is not set # CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set # CONFIG_BTRFS_FS is not set +CONFIG_FILE_LOCKING=y +CONFIG_FSNOTIFY=y CONFIG_DNOTIFY=y CONFIG_INOTIFY=y CONFIG_INOTIFY_USER=y @@ -1528,6 +1508,7 @@ CONFIG_NFS_FS=y CONFIG_NFS_V3=y # CONFIG_NFS_V3_ACL is not set CONFIG_NFS_V4=y +# CONFIG_NFS_V4_1 is not set CONFIG_ROOT_NFS=y CONFIG_NFSD=y # CONFIG_NFSD_V3 is not set @@ -1632,6 +1613,7 @@ CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y CONFIG_HAVE_LMB=y CONFIG_NLATTR=y +CONFIG_GENERIC_ATOMIC64=y # # Kernel hacking @@ -1662,6 +1644,9 @@ CONFIG_SCHED_DEBUG=y # CONFIG_RT_MUTEX_TESTER is not set # CONFIG_DEBUG_SPINLOCK is not set # CONFIG_DEBUG_MUTEXES is not set +# CONFIG_DEBUG_LOCK_ALLOC is not set +# CONFIG_PROVE_LOCKING is not set +# CONFIG_LOCK_STAT is not set # CONFIG_DEBUG_SPINLOCK_SLEEP is not set # CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set # CONFIG_DEBUG_KOBJECT is not set @@ -1674,7 +1659,6 @@ CONFIG_DEBUG_INFO=y # CONFIG_DEBUG_LIST is not set # CONFIG_DEBUG_SG is not set # CONFIG_DEBUG_NOTIFIERS is not set -# CONFIG_BOOT_PRINTK_DELAY is not set # CONFIG_RCU_TORTURE_TEST is not set # CONFIG_RCU_CPU_STALL_DETECTOR is not set # CONFIG_BACKTRACE_SELF_TEST is not set @@ -1688,16 +1672,15 @@ CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y CONFIG_HAVE_DYNAMIC_FTRACE=y CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y CONFIG_TRACING_SUPPORT=y - -# -# Tracers -# +CONFIG_FTRACE=y # CONFIG_FUNCTION_TRACER is not set +# CONFIG_IRQSOFF_TRACER is not set # CONFIG_SCHED_TRACER is not set -# CONFIG_CONTEXT_SWITCH_TRACER is not set -# CONFIG_EVENT_TRACER is not set +# CONFIG_ENABLE_DEFAULT_TRACERS is not set # CONFIG_BOOT_TRACER is not set -# CONFIG_TRACE_BRANCH_PROFILING is not set +CONFIG_BRANCH_PROFILE_NONE=y +# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set +# CONFIG_PROFILE_ALL_BRANCHES is not set # CONFIG_STACK_TRACER is not set # CONFIG_KMEMTRACE is not set # CONFIG_WORKQUEUE_TRACER is not set @@ -1706,9 +1689,13 @@ CONFIG_TRACING_SUPPORT=y # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y # CONFIG_KGDB is not set +# CONFIG_KMEMCHECK is not set +# CONFIG_PPC_DISABLE_WERROR is not set +CONFIG_PPC_WERROR=y CONFIG_PRINT_STACK_DEPTH=64 # CONFIG_DEBUG_STACKOVERFLOW is not set # CONFIG_DEBUG_STACK_USAGE is not set +# CONFIG_PPC_EMULATED_STATS is not set # CONFIG_CODE_PATCHING_SELFTEST is not set # CONFIG_FTR_FIXUP_SELFTEST is not set # CONFIG_MSI_BITMAP_SELFTEST is not set diff --git a/arch/powerpc/configs/mpc866_ads_defconfig b/arch/powerpc/configs/mpc866_ads_defconfig index 3add6f62b21..6809b61ed3d 100644 --- a/arch/powerpc/configs/mpc866_ads_defconfig +++ b/arch/powerpc/configs/mpc866_ads_defconfig @@ -1,14 +1,14 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.30-rc3 -# Wed May 13 17:22:00 2009 +# Linux kernel version: 2.6.31-rc4 +# Wed Jul 29 23:31:57 2009 # # CONFIG_PPC64 is not set # # Processor support # -# CONFIG_6xx is not set +# CONFIG_PPC_BOOK3S_32 is not set # CONFIG_PPC_85xx is not set CONFIG_PPC_8xx=y # CONFIG_40x is not set @@ -27,15 +27,16 @@ CONFIG_GENERIC_TIME=y CONFIG_GENERIC_TIME_VSYSCALL=y CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_GENERIC_HARDIRQS=y +CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set CONFIG_IRQ_PER_CPU=y CONFIG_STACKTRACE_SUPPORT=y CONFIG_HAVE_LATENCYTOP_SUPPORT=y +CONFIG_TRACE_IRQFLAGS_SUPPORT=y CONFIG_LOCKDEP_SUPPORT=y CONFIG_RWSEM_XCHGADD_ALGORITHM=y CONFIG_ARCH_HAS_ILOG2_U32=y CONFIG_GENERIC_HWEIGHT=y -CONFIG_GENERIC_CALIBRATE_DELAY=y CONFIG_GENERIC_FIND_NEXT_BIT=y # CONFIG_ARCH_NO_VIRT_TO_BUS is not set CONFIG_PPC=y @@ -48,11 +49,13 @@ CONFIG_OF=y # CONFIG_PPC_UDBG_16550 is not set # CONFIG_GENERIC_TBSYNC is not set CONFIG_AUDIT_ARCH=y +CONFIG_DTC=y # CONFIG_DEFAULT_UIMAGE is not set # CONFIG_PPC_DCR_NATIVE is not set # CONFIG_PPC_DCR_MMIO is not set CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" +CONFIG_CONSTRUCTORS=y # # General setup @@ -98,7 +101,6 @@ CONFIG_EMBEDDED=y # CONFIG_SYSCTL_SYSCALL is not set CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_EXTRA_PASS is not set -# CONFIG_STRIP_ASM_SYMS is not set # CONFIG_HOTPLUG is not set CONFIG_PRINTK=y # CONFIG_BUG is not set @@ -111,8 +113,15 @@ CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y CONFIG_AIO=y +CONFIG_HAVE_PERF_COUNTERS=y + +# +# Performance Counters +# +# CONFIG_PERF_COUNTERS is not set # CONFIG_VM_EVENT_COUNTERS is not set CONFIG_SLUB_DEBUG=y +# CONFIG_STRIP_ASM_SYMS is not set CONFIG_COMPAT_BRK=y # CONFIG_SLAB is not set CONFIG_SLUB=y @@ -126,6 +135,10 @@ CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_ARCH_TRACEHOOK=y CONFIG_HAVE_CLK=y + +# +# GCOV-based kernel profiling +# # CONFIG_SLOW_WORK is not set # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y @@ -133,7 +146,7 @@ CONFIG_RT_MUTEXES=y CONFIG_BASE_SMALL=1 # CONFIG_MODULES is not set CONFIG_BLOCK=y -# CONFIG_LBD is not set +CONFIG_LBDAF=y # CONFIG_BLK_DEV_BSG is not set # CONFIG_BLK_DEV_INTEGRITY is not set @@ -219,6 +232,7 @@ CONFIG_BINFMT_ELF=y # CONFIG_BINFMT_MISC is not set CONFIG_MATH_EMULATION=y # CONFIG_IOMMU_HELPER is not set +# CONFIG_SWIOTLB is not set CONFIG_PPC_NEED_DMA_SYNC_OPS=y CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y CONFIG_ARCH_HAS_WALK_MEMORY=y @@ -238,9 +252,9 @@ CONFIG_MIGRATION=y CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y -CONFIG_UNEVICTABLE_LRU=y CONFIG_HAVE_MLOCK=y CONFIG_HAVE_MLOCKED_PAGE_BIT=y +CONFIG_DEFAULT_MMAP_MIN_ADDR=4096 CONFIG_PPC_4K_PAGES=y # CONFIG_PPC_16K_PAGES is not set # CONFIG_PPC_64K_PAGES is not set @@ -278,6 +292,7 @@ CONFIG_PAGE_OFFSET=0xc0000000 CONFIG_KERNEL_START=0xc0000000 CONFIG_PHYSICAL_START=0x00000000 CONFIG_TASK_SIZE=0x80000000 +CONFIG_CONSISTENT_SIZE=0x00200000 CONFIG_NET=y # @@ -339,6 +354,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set # CONFIG_PHONET is not set +# CONFIG_IEEE802154 is not set # CONFIG_NET_SCHED is not set # CONFIG_DCB is not set @@ -356,7 +372,11 @@ CONFIG_WIRELESS=y CONFIG_WIRELESS_OLD_REGULATORY=y # CONFIG_WIRELESS_EXT is not set # CONFIG_LIB80211 is not set -# CONFIG_MAC80211 is not set + +# +# CFG80211 needs to be enabled for MAC80211 +# +CONFIG_MAC80211_DEFAULT_PS_VALUE=0 # CONFIG_WIMAX is not set # CONFIG_RFKILL is not set # CONFIG_NET_9P is not set @@ -374,6 +394,7 @@ CONFIG_PREVENT_FIRMWARE_BUILD=y # CONFIG_CONNECTOR is not set # CONFIG_MTD is not set CONFIG_OF_DEVICE=y +CONFIG_OF_MDIO=y # CONFIG_PARPORT is not set CONFIG_BLK_DEV=y # CONFIG_BLK_DEV_FD is not set @@ -407,7 +428,6 @@ CONFIG_HAVE_IDE=y # CONFIG_MD is not set # CONFIG_MACINTOSH_DRIVERS is not set CONFIG_NETDEVICES=y -CONFIG_COMPAT_NET_DEV_OPS=y # CONFIG_DUMMY is not set # CONFIG_BONDING is not set # CONFIG_MACVLAN is not set @@ -446,6 +466,7 @@ CONFIG_MII=y # CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set # CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set # CONFIG_B44 is not set +# CONFIG_KS8842 is not set CONFIG_FS_ENET=y CONFIG_FS_ENET_HAS_SCC=y CONFIG_FS_ENET_HAS_FEC=y @@ -453,6 +474,7 @@ CONFIG_FS_ENET_MDIO_FEC=y CONFIG_NETDEV_1000=y # CONFIG_FSL_PQ_MDIO is not set # CONFIG_GIANFAR is not set +# CONFIG_MV643XX_ETH is not set CONFIG_NETDEV_10000=y # @@ -496,11 +518,11 @@ CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 # CONFIG_INPUT_KEYBOARD=y CONFIG_KEYBOARD_ATKBD=y -# CONFIG_KEYBOARD_SUNKBD is not set # CONFIG_KEYBOARD_LKKBD is not set -# CONFIG_KEYBOARD_XTKBD is not set # CONFIG_KEYBOARD_NEWTON is not set # CONFIG_KEYBOARD_STOWAWAY is not set +# CONFIG_KEYBOARD_SUNKBD is not set +# CONFIG_KEYBOARD_XTKBD is not set CONFIG_INPUT_MOUSE=y CONFIG_MOUSE_PS2=y CONFIG_MOUSE_PS2_ALPS=y @@ -562,6 +584,11 @@ CONFIG_GEN_RTC=y # CONFIG_TCG_TPM is not set # CONFIG_I2C is not set # CONFIG_SPI is not set + +# +# PPS support +# +# CONFIG_PPS is not set CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y # CONFIG_GPIOLIB is not set # CONFIG_W1 is not set @@ -597,22 +624,7 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_HTC_PASIC3 is not set # CONFIG_MFD_TMIO is not set # CONFIG_REGULATOR is not set - -# -# Multimedia devices -# - -# -# Multimedia core support -# -# CONFIG_VIDEO_DEV is not set -# CONFIG_DVB_CORE is not set -# CONFIG_VIDEO_MEDIA is not set - -# -# Multimedia drivers -# -CONFIG_DAB=y +# CONFIG_MEDIA_SUPPORT is not set # # Graphics support @@ -664,6 +676,10 @@ CONFIG_USB_SUPPORT=y # CONFIG_DMADEVICES is not set # CONFIG_AUXDISPLAY is not set # CONFIG_UIO is not set + +# +# TI VLYNQ +# # CONFIG_STAGING is not set # @@ -685,10 +701,12 @@ CONFIG_FS_MBCACHE=y # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set -CONFIG_FILE_LOCKING=y # CONFIG_XFS_FS is not set +# CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set # CONFIG_BTRFS_FS is not set +CONFIG_FILE_LOCKING=y +CONFIG_FSNOTIFY=y CONFIG_DNOTIFY=y CONFIG_INOTIFY=y CONFIG_INOTIFY_USER=y @@ -808,6 +826,7 @@ CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y CONFIG_HAVE_LMB=y CONFIG_NLATTR=y +CONFIG_GENERIC_ATOMIC64=y # # Kernel hacking @@ -831,22 +850,11 @@ CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y CONFIG_HAVE_DYNAMIC_FTRACE=y CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y CONFIG_TRACING_SUPPORT=y - -# -# Tracers -# -# CONFIG_FUNCTION_TRACER is not set -# CONFIG_SCHED_TRACER is not set -# CONFIG_CONTEXT_SWITCH_TRACER is not set -# CONFIG_EVENT_TRACER is not set -# CONFIG_BOOT_TRACER is not set -# CONFIG_TRACE_BRANCH_PROFILING is not set -# CONFIG_STACK_TRACER is not set -# CONFIG_KMEMTRACE is not set -# CONFIG_WORKQUEUE_TRACER is not set -# CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_FTRACE is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y +# CONFIG_PPC_DISABLE_WERROR is not set +CONFIG_PPC_WERROR=y CONFIG_PRINT_STACK_DEPTH=64 # CONFIG_IRQSTACKS is not set # CONFIG_PPC_EARLY_DEBUG is not set diff --git a/arch/powerpc/configs/mpc86xx_defconfig b/arch/powerpc/configs/mpc86xx_defconfig index 5bb1b8eb0b4..0e8684a3138 100644 --- a/arch/powerpc/configs/mpc86xx_defconfig +++ b/arch/powerpc/configs/mpc86xx_defconfig @@ -1,26 +1,28 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.30-rc3 -# Wed May 13 17:22:00 2009 +# Linux kernel version: 2.6.31-rc4 +# Wed Jul 29 23:31:58 2009 # # CONFIG_PPC64 is not set # # Processor support # -CONFIG_6xx=y +CONFIG_PPC_BOOK3S_32=y # CONFIG_PPC_85xx is not set # CONFIG_PPC_8xx is not set # CONFIG_40x is not set # CONFIG_44x is not set # CONFIG_E200 is not set CONFIG_PPC_BOOK3S=y +CONFIG_6xx=y CONFIG_PPC_FPU=y # CONFIG_PHYS_64BIT is not set CONFIG_ALTIVEC=y CONFIG_PPC_STD_MMU=y CONFIG_PPC_STD_MMU_32=y # CONFIG_PPC_MM_SLICES is not set +CONFIG_PPC_HAVE_PMU_SUPPORT=y CONFIG_SMP=y CONFIG_NR_CPUS=2 CONFIG_PPC32=y @@ -32,15 +34,16 @@ CONFIG_GENERIC_TIME=y CONFIG_GENERIC_TIME_VSYSCALL=y CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_GENERIC_HARDIRQS=y +CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set CONFIG_IRQ_PER_CPU=y CONFIG_STACKTRACE_SUPPORT=y CONFIG_HAVE_LATENCYTOP_SUPPORT=y +CONFIG_TRACE_IRQFLAGS_SUPPORT=y CONFIG_LOCKDEP_SUPPORT=y CONFIG_RWSEM_XCHGADD_ALGORITHM=y CONFIG_ARCH_HAS_ILOG2_U32=y CONFIG_GENERIC_HWEIGHT=y -CONFIG_GENERIC_CALIBRATE_DELAY=y CONFIG_GENERIC_FIND_NEXT_BIT=y CONFIG_GENERIC_GPIO=y # CONFIG_ARCH_NO_VIRT_TO_BUS is not set @@ -55,11 +58,13 @@ CONFIG_PPC_UDBG_16550=y CONFIG_GENERIC_TBSYNC=y CONFIG_AUDIT_ARCH=y CONFIG_GENERIC_BUG=y +CONFIG_DTC=y CONFIG_DEFAULT_UIMAGE=y # CONFIG_PPC_DCR_NATIVE is not set # CONFIG_PPC_DCR_MMIO is not set CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" +CONFIG_CONSTRUCTORS=y # # General setup @@ -114,7 +119,6 @@ CONFIG_SYSCTL_SYSCALL=y CONFIG_KALLSYMS=y CONFIG_KALLSYMS_ALL=y CONFIG_KALLSYMS_EXTRA_PASS=y -# CONFIG_STRIP_ASM_SYMS is not set CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y @@ -127,9 +131,16 @@ CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y CONFIG_AIO=y +CONFIG_HAVE_PERF_COUNTERS=y + +# +# Performance Counters +# +# CONFIG_PERF_COUNTERS is not set CONFIG_VM_EVENT_COUNTERS=y CONFIG_PCI_QUIRKS=y CONFIG_SLUB_DEBUG=y +# CONFIG_STRIP_ASM_SYMS is not set CONFIG_COMPAT_BRK=y # CONFIG_SLAB is not set CONFIG_SLUB=y @@ -144,6 +155,10 @@ CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_ARCH_TRACEHOOK=y CONFIG_USE_GENERIC_SMP_HELPERS=y + +# +# GCOV-based kernel profiling +# # CONFIG_SLOW_WORK is not set # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y @@ -157,7 +172,7 @@ CONFIG_MODVERSIONS=y # CONFIG_MODULE_SRCVERSION_ALL is not set CONFIG_STOP_MACHINE=y CONFIG_BLOCK=y -CONFIG_LBD=y +CONFIG_LBDAF=y # CONFIG_BLK_DEV_BSG is not set # CONFIG_BLK_DEV_INTEGRITY is not set @@ -236,7 +251,9 @@ CONFIG_BINFMT_ELF=y # CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set # CONFIG_HAVE_AOUT is not set CONFIG_BINFMT_MISC=m -# CONFIG_IOMMU_HELPER is not set +CONFIG_IOMMU_HELPER=y +CONFIG_SWIOTLB=y +CONFIG_PPC_NEED_DMA_SYNC_OPS=y CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y CONFIG_ARCH_HAS_WALK_MEMORY=y CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y @@ -258,9 +275,9 @@ CONFIG_MIGRATION=y CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y -CONFIG_UNEVICTABLE_LRU=y CONFIG_HAVE_MLOCK=y CONFIG_HAVE_MLOCKED_PAGE_BIT=y +CONFIG_DEFAULT_MMAP_MIN_ADDR=4096 CONFIG_PPC_4K_PAGES=y # CONFIG_PPC_16K_PAGES is not set # CONFIG_PPC_64K_PAGES is not set @@ -403,6 +420,7 @@ CONFIG_SCTP_HMAC_MD5=y # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set # CONFIG_PHONET is not set +# CONFIG_IEEE802154 is not set # CONFIG_NET_SCHED is not set # CONFIG_DCB is not set @@ -421,7 +439,11 @@ CONFIG_WIRELESS=y CONFIG_WIRELESS_OLD_REGULATORY=y # CONFIG_WIRELESS_EXT is not set # CONFIG_LIB80211 is not set -# CONFIG_MAC80211 is not set + +# +# CFG80211 needs to be enabled for MAC80211 +# +CONFIG_MAC80211_DEFAULT_PS_VALUE=0 # CONFIG_WIMAX is not set # CONFIG_RFKILL is not set # CONFIG_NET_9P is not set @@ -447,6 +469,7 @@ CONFIG_EXTRA_FIRMWARE="" CONFIG_OF_DEVICE=y CONFIG_OF_GPIO=y CONFIG_OF_I2C=y +CONFIG_OF_MDIO=y # CONFIG_PARPORT is not set CONFIG_BLK_DEV=y # CONFIG_BLK_DEV_FD is not set @@ -482,7 +505,9 @@ CONFIG_MISC_DEVICES=y # # CONFIG_EEPROM_AT24 is not set CONFIG_EEPROM_LEGACY=y +# CONFIG_EEPROM_MAX6875 is not set # CONFIG_EEPROM_93CX6 is not set +# CONFIG_CB710_CORE is not set CONFIG_HAVE_IDE=y # CONFIG_IDE is not set @@ -506,10 +531,6 @@ CONFIG_BLK_DEV_SR=y # CONFIG_BLK_DEV_SR_VENDOR is not set CONFIG_CHR_DEV_SG=y # CONFIG_CHR_DEV_SCH is not set - -# -# Some SCSI devices (e.g. CD jukebox) support multiple LUNs -# CONFIG_SCSI_MULTI_LUN=y # CONFIG_SCSI_CONSTANTS is not set CONFIG_SCSI_LOGGING=y @@ -527,6 +548,7 @@ CONFIG_SCSI_WAIT_SCAN=m CONFIG_SCSI_LOWLEVEL=y # CONFIG_ISCSI_TCP is not set # CONFIG_SCSI_CXGB3_ISCSI is not set +# CONFIG_SCSI_BNX2_ISCSI is not set # CONFIG_BLK_DEV_3W_XXXX_RAID is not set # CONFIG_SCSI_3W_9XXX is not set # CONFIG_SCSI_ACARD is not set @@ -535,6 +557,7 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_SCSI_AIC7XXX_OLD is not set # CONFIG_SCSI_AIC79XX is not set # CONFIG_SCSI_AIC94XX is not set +# CONFIG_SCSI_MVSAS is not set # CONFIG_SCSI_DPT_I2O is not set # CONFIG_SCSI_ADVANSYS is not set # CONFIG_SCSI_ARCMSR is not set @@ -554,7 +577,6 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_SCSI_IPS is not set # CONFIG_SCSI_INITIO is not set # CONFIG_SCSI_INIA100 is not set -# CONFIG_SCSI_MVSAS is not set # CONFIG_SCSI_STEX is not set # CONFIG_SCSI_SYM53C8XX_2 is not set # CONFIG_SCSI_IPR is not set @@ -638,14 +660,17 @@ CONFIG_PATA_ALI=y # # -# Enable only one of the two stacks, unless you know what you are doing +# You can enable one or both FireWire driver stacks. +# + +# +# See the help texts for more information. # # CONFIG_FIREWIRE is not set # CONFIG_IEEE1394 is not set # CONFIG_I2O is not set # CONFIG_MACINTOSH_DRIVERS is not set CONFIG_NETDEVICES=y -CONFIG_COMPAT_NET_DEV_OPS=y CONFIG_DUMMY=y # CONFIG_BONDING is not set # CONFIG_MACVLAN is not set @@ -692,6 +717,7 @@ CONFIG_MII=y # CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set # CONFIG_NET_PCI is not set # CONFIG_B44 is not set +# CONFIG_KS8842 is not set # CONFIG_ATL2 is not set CONFIG_NETDEV_1000=y # CONFIG_ACENIC is not set @@ -711,8 +737,10 @@ CONFIG_NETDEV_1000=y # CONFIG_VIA_VELOCITY is not set # CONFIG_TIGON3 is not set # CONFIG_BNX2 is not set +# CONFIG_CNIC is not set CONFIG_FSL_PQ_MDIO=y CONFIG_GIANFAR=y +# CONFIG_MV643XX_ETH is not set # CONFIG_QLA3XXX is not set # CONFIG_ATL1 is not set # CONFIG_ATL1E is not set @@ -913,13 +941,17 @@ CONFIG_I2C_MPC=y # CONFIG_SENSORS_PCF8574 is not set # CONFIG_PCF8575 is not set # CONFIG_SENSORS_PCA9539 is not set -# CONFIG_SENSORS_MAX6875 is not set # CONFIG_SENSORS_TSL2550 is not set # CONFIG_I2C_DEBUG_CORE is not set # CONFIG_I2C_DEBUG_ALGO is not set # CONFIG_I2C_DEBUG_BUS is not set # CONFIG_I2C_DEBUG_CHIP is not set # CONFIG_SPI is not set + +# +# PPS support +# +# CONFIG_PPS is not set CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y CONFIG_ARCH_REQUIRE_GPIOLIB=y CONFIG_GPIOLIB=y @@ -973,76 +1005,9 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_MFD_WM8400 is not set # CONFIG_MFD_WM8350_I2C is not set # CONFIG_MFD_PCF50633 is not set +# CONFIG_AB3100_CORE is not set # CONFIG_REGULATOR is not set - -# -# Multimedia devices -# - -# -# Multimedia core support -# -# CONFIG_VIDEO_DEV is not set -CONFIG_DVB_CORE=m -CONFIG_VIDEO_MEDIA=m - -# -# Multimedia drivers -# -# CONFIG_MEDIA_ATTACH is not set -CONFIG_MEDIA_TUNER=m -# CONFIG_MEDIA_TUNER_CUSTOMISE is not set -CONFIG_MEDIA_TUNER_SIMPLE=m -CONFIG_MEDIA_TUNER_TDA8290=m -CONFIG_MEDIA_TUNER_TDA9887=m -CONFIG_MEDIA_TUNER_TEA5761=m -CONFIG_MEDIA_TUNER_TEA5767=m -CONFIG_MEDIA_TUNER_MT20XX=m -CONFIG_MEDIA_TUNER_XC2028=m -CONFIG_MEDIA_TUNER_XC5000=m -CONFIG_MEDIA_TUNER_MC44S803=m -# CONFIG_DVB_DYNAMIC_MINORS is not set -CONFIG_DVB_CAPTURE_DRIVERS=y - -# -# Supported SAA7146 based PCI Adapters -# -# CONFIG_TTPCI_EEPROM is not set -# CONFIG_DVB_BUDGET_CORE is not set - -# -# Supported USB Adapters -# -# CONFIG_DVB_USB is not set -# CONFIG_DVB_TTUSB_BUDGET is not set -# CONFIG_DVB_TTUSB_DEC is not set -# CONFIG_DVB_SIANO_SMS1XXX is not set - -# -# Supported FlexCopII (B2C2) Adapters -# -# CONFIG_DVB_B2C2_FLEXCOP is not set - -# -# Supported BT878 Adapters -# - -# -# Supported Pluto2 Adapters -# -# CONFIG_DVB_PLUTO2 is not set - -# -# Supported SDMC DM1105 Adapters -# -# CONFIG_DVB_DM1105 is not set - -# -# Supported DVB Frontends -# -# CONFIG_DVB_FE_CUSTOMISE is not set -CONFIG_DAB=y -# CONFIG_USB_DABUSB is not set +# CONFIG_MEDIA_SUPPORT is not set # # Graphics support @@ -1082,6 +1047,11 @@ CONFIG_SND_VERBOSE_PROCFS=y # CONFIG_SND_VERBOSE_PRINTK is not set # CONFIG_SND_DEBUG is not set CONFIG_SND_VMASTER=y +# CONFIG_SND_RAWMIDI_SEQ is not set +# CONFIG_SND_OPL3_LIB_SEQ is not set +# CONFIG_SND_OPL4_LIB_SEQ is not set +# CONFIG_SND_SBAWE_SEQ is not set +# CONFIG_SND_EMU10K1_SEQ is not set CONFIG_SND_AC97_CODEC=y CONFIG_SND_DRIVERS=y # CONFIG_SND_DUMMY is not set @@ -1108,6 +1078,7 @@ CONFIG_SND_PCI=y # CONFIG_SND_CS4281 is not set # CONFIG_SND_CS46XX is not set # CONFIG_SND_CS5530 is not set +# CONFIG_SND_CTXFI is not set # CONFIG_SND_DARLA20 is not set # CONFIG_SND_GINA20 is not set # CONFIG_SND_LAYLA20 is not set @@ -1138,6 +1109,7 @@ CONFIG_SND_PCI=y CONFIG_SND_INTEL8X0=y # CONFIG_SND_INTEL8X0M is not set # CONFIG_SND_KORG1212 is not set +# CONFIG_SND_LX6464ES is not set # CONFIG_SND_MAESTRO3 is not set # CONFIG_SND_MIXART is not set # CONFIG_SND_NM256 is not set @@ -1182,7 +1154,7 @@ CONFIG_HID_BELKIN=y CONFIG_HID_CHERRY=y CONFIG_HID_CHICONY=y CONFIG_HID_CYPRESS=y -# CONFIG_DRAGONRISE_FF is not set +# CONFIG_HID_DRAGONRISE is not set CONFIG_HID_EZKEY=y # CONFIG_HID_KYE is not set CONFIG_HID_GYRATION=y @@ -1199,10 +1171,11 @@ CONFIG_HID_PETALYNX=y CONFIG_HID_SAMSUNG=y CONFIG_HID_SONY=y CONFIG_HID_SUNPLUS=y -# CONFIG_GREENASIA_FF is not set +# CONFIG_HID_GREENASIA is not set +# CONFIG_HID_SMARTJOYPLUS is not set # CONFIG_HID_TOPSEED is not set -CONFIG_THRUSTMASTER_FF=m -CONFIG_ZEROPLUS_FF=m +# CONFIG_HID_THRUSTMASTER is not set +# CONFIG_HID_ZEROPLUS is not set CONFIG_USB_SUPPORT=y CONFIG_USB_ARCH_HAS_HCD=y CONFIG_USB_ARCH_HAS_OHCI=y @@ -1228,6 +1201,7 @@ CONFIG_USB_MON=y # USB Host Controller Drivers # # CONFIG_USB_C67X00_HCD is not set +# CONFIG_USB_XHCI_HCD is not set CONFIG_USB_EHCI_HCD=y # CONFIG_USB_EHCI_ROOT_HUB_TT is not set # CONFIG_USB_EHCI_TT_NEWSCHED is not set @@ -1237,9 +1211,9 @@ CONFIG_USB_EHCI_HCD_PPC_OF=y # CONFIG_USB_ISP116X_HCD is not set # CONFIG_USB_ISP1760_HCD is not set CONFIG_USB_OHCI_HCD=y -CONFIG_USB_OHCI_HCD_PPC_OF=y CONFIG_USB_OHCI_HCD_PPC_OF_BE=y CONFIG_USB_OHCI_HCD_PPC_OF_LE=y +CONFIG_USB_OHCI_HCD_PPC_OF=y CONFIG_USB_OHCI_HCD_PCI=y CONFIG_USB_OHCI_BIG_ENDIAN_DESC=y CONFIG_USB_OHCI_BIG_ENDIAN_MMIO=y @@ -1360,6 +1334,7 @@ CONFIG_RTC_INTF_DEV=y # CONFIG_RTC_DRV_S35390A is not set # CONFIG_RTC_DRV_FM3130 is not set # CONFIG_RTC_DRV_RX8581 is not set +# CONFIG_RTC_DRV_RX8025 is not set # # SPI RTC drivers @@ -1387,6 +1362,10 @@ CONFIG_RTC_DRV_CMOS=y # CONFIG_DMADEVICES is not set # CONFIG_AUXDISPLAY is not set # CONFIG_UIO is not set + +# +# TI VLYNQ +# # CONFIG_STAGING is not set # @@ -1406,11 +1385,12 @@ CONFIG_FS_MBCACHE=y # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set -CONFIG_FILE_LOCKING=y # CONFIG_XFS_FS is not set # CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set # CONFIG_BTRFS_FS is not set +CONFIG_FILE_LOCKING=y +CONFIG_FSNOTIFY=y CONFIG_DNOTIFY=y CONFIG_INOTIFY=y CONFIG_INOTIFY_USER=y @@ -1485,6 +1465,7 @@ CONFIG_NFS_FS=y CONFIG_NFS_V3=y # CONFIG_NFS_V3_ACL is not set CONFIG_NFS_V4=y +# CONFIG_NFS_V4_1 is not set CONFIG_ROOT_NFS=y CONFIG_NFSD=y # CONFIG_NFSD_V3 is not set @@ -1586,6 +1567,7 @@ CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y CONFIG_HAVE_LMB=y CONFIG_NLATTR=y +CONFIG_GENERIC_ATOMIC64=y # # Kernel hacking @@ -1616,6 +1598,9 @@ CONFIG_SCHED_DEBUG=y # CONFIG_RT_MUTEX_TESTER is not set # CONFIG_DEBUG_SPINLOCK is not set # CONFIG_DEBUG_MUTEXES is not set +# CONFIG_DEBUG_LOCK_ALLOC is not set +# CONFIG_PROVE_LOCKING is not set +# CONFIG_LOCK_STAT is not set # CONFIG_DEBUG_SPINLOCK_SLEEP is not set # CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set # CONFIG_DEBUG_KOBJECT is not set @@ -1628,7 +1613,6 @@ CONFIG_DEBUG_INFO=y # CONFIG_DEBUG_LIST is not set # CONFIG_DEBUG_SG is not set # CONFIG_DEBUG_NOTIFIERS is not set -# CONFIG_BOOT_PRINTK_DELAY is not set # CONFIG_RCU_TORTURE_TEST is not set # CONFIG_RCU_CPU_STALL_DETECTOR is not set # CONFIG_BACKTRACE_SELF_TEST is not set @@ -1642,16 +1626,15 @@ CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y CONFIG_HAVE_DYNAMIC_FTRACE=y CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y CONFIG_TRACING_SUPPORT=y - -# -# Tracers -# +CONFIG_FTRACE=y # CONFIG_FUNCTION_TRACER is not set +# CONFIG_IRQSOFF_TRACER is not set # CONFIG_SCHED_TRACER is not set -# CONFIG_CONTEXT_SWITCH_TRACER is not set -# CONFIG_EVENT_TRACER is not set +# CONFIG_ENABLE_DEFAULT_TRACERS is not set # CONFIG_BOOT_TRACER is not set -# CONFIG_TRACE_BRANCH_PROFILING is not set +CONFIG_BRANCH_PROFILE_NONE=y +# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set +# CONFIG_PROFILE_ALL_BRANCHES is not set # CONFIG_STACK_TRACER is not set # CONFIG_KMEMTRACE is not set # CONFIG_WORKQUEUE_TRACER is not set @@ -1659,6 +1642,9 @@ CONFIG_TRACING_SUPPORT=y # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y # CONFIG_KGDB is not set +# CONFIG_KMEMCHECK is not set +# CONFIG_PPC_DISABLE_WERROR is not set +CONFIG_PPC_WERROR=y CONFIG_PRINT_STACK_DEPTH=64 # CONFIG_DEBUG_STACKOVERFLOW is not set # CONFIG_DEBUG_STACK_USAGE is not set diff --git a/arch/powerpc/configs/mpc885_ads_defconfig b/arch/powerpc/configs/mpc885_ads_defconfig index 42e64ebc279..dbe8e869a82 100644 --- a/arch/powerpc/configs/mpc885_ads_defconfig +++ b/arch/powerpc/configs/mpc885_ads_defconfig @@ -1,14 +1,14 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.30-rc3 -# Wed May 13 17:22:01 2009 +# Linux kernel version: 2.6.31-rc4 +# Wed Jul 29 23:31:59 2009 # # CONFIG_PPC64 is not set # # Processor support # -# CONFIG_6xx is not set +# CONFIG_PPC_BOOK3S_32 is not set # CONFIG_PPC_85xx is not set CONFIG_PPC_8xx=y # CONFIG_40x is not set @@ -27,15 +27,16 @@ CONFIG_GENERIC_TIME=y CONFIG_GENERIC_TIME_VSYSCALL=y CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_GENERIC_HARDIRQS=y +CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set CONFIG_IRQ_PER_CPU=y CONFIG_STACKTRACE_SUPPORT=y CONFIG_HAVE_LATENCYTOP_SUPPORT=y +CONFIG_TRACE_IRQFLAGS_SUPPORT=y CONFIG_LOCKDEP_SUPPORT=y CONFIG_RWSEM_XCHGADD_ALGORITHM=y CONFIG_ARCH_HAS_ILOG2_U32=y CONFIG_GENERIC_HWEIGHT=y -CONFIG_GENERIC_CALIBRATE_DELAY=y CONFIG_GENERIC_FIND_NEXT_BIT=y # CONFIG_ARCH_NO_VIRT_TO_BUS is not set CONFIG_PPC=y @@ -49,11 +50,13 @@ CONFIG_OF=y # CONFIG_GENERIC_TBSYNC is not set CONFIG_AUDIT_ARCH=y CONFIG_GENERIC_BUG=y +CONFIG_DTC=y # CONFIG_DEFAULT_UIMAGE is not set # CONFIG_PPC_DCR_NATIVE is not set # CONFIG_PPC_DCR_MMIO is not set CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" +CONFIG_CONSTRUCTORS=y # # General setup @@ -100,7 +103,6 @@ CONFIG_EMBEDDED=y CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_ALL is not set # CONFIG_KALLSYMS_EXTRA_PASS is not set -# CONFIG_STRIP_ASM_SYMS is not set CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y @@ -113,8 +115,15 @@ CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y CONFIG_AIO=y +CONFIG_HAVE_PERF_COUNTERS=y + +# +# Performance Counters +# +# CONFIG_PERF_COUNTERS is not set # CONFIG_VM_EVENT_COUNTERS is not set CONFIG_SLUB_DEBUG=y +# CONFIG_STRIP_ASM_SYMS is not set CONFIG_COMPAT_BRK=y # CONFIG_SLAB is not set CONFIG_SLUB=y @@ -128,13 +137,17 @@ CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_ARCH_TRACEHOOK=y CONFIG_HAVE_CLK=y + +# +# GCOV-based kernel profiling +# # CONFIG_SLOW_WORK is not set # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y CONFIG_BASE_SMALL=1 # CONFIG_MODULES is not set CONFIG_BLOCK=y -# CONFIG_LBD is not set +CONFIG_LBDAF=y # CONFIG_BLK_DEV_BSG is not set # CONFIG_BLK_DEV_INTEGRITY is not set @@ -227,6 +240,7 @@ CONFIG_BINFMT_ELF=y # CONFIG_MATH_EMULATION is not set CONFIG_8XX_MINIMAL_FPEMU=y # CONFIG_IOMMU_HELPER is not set +# CONFIG_SWIOTLB is not set CONFIG_PPC_NEED_DMA_SYNC_OPS=y CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y CONFIG_ARCH_HAS_WALK_MEMORY=y @@ -246,9 +260,9 @@ CONFIG_MIGRATION=y CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y -CONFIG_UNEVICTABLE_LRU=y CONFIG_HAVE_MLOCK=y CONFIG_HAVE_MLOCKED_PAGE_BIT=y +CONFIG_DEFAULT_MMAP_MIN_ADDR=4096 CONFIG_PPC_4K_PAGES=y # CONFIG_PPC_16K_PAGES is not set # CONFIG_PPC_64K_PAGES is not set @@ -287,6 +301,7 @@ CONFIG_PAGE_OFFSET=0xc0000000 CONFIG_KERNEL_START=0xc0000000 CONFIG_PHYSICAL_START=0x00000000 CONFIG_TASK_SIZE=0x80000000 +CONFIG_CONSISTENT_SIZE=0x00200000 CONFIG_NET=y # @@ -343,6 +358,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set # CONFIG_PHONET is not set +# CONFIG_IEEE802154 is not set # CONFIG_NET_SCHED is not set # CONFIG_DCB is not set @@ -360,7 +376,11 @@ CONFIG_WIRELESS=y CONFIG_WIRELESS_OLD_REGULATORY=y # CONFIG_WIRELESS_EXT is not set # CONFIG_LIB80211 is not set -# CONFIG_MAC80211 is not set + +# +# CFG80211 needs to be enabled for MAC80211 +# +CONFIG_MAC80211_DEFAULT_PS_VALUE=0 # CONFIG_WIMAX is not set # CONFIG_RFKILL is not set # CONFIG_NET_9P is not set @@ -463,6 +483,7 @@ CONFIG_MTD_PHYSMAP_OF=y # # CONFIG_MTD_UBI is not set CONFIG_OF_DEVICE=y +CONFIG_OF_MDIO=y # CONFIG_PARPORT is not set # CONFIG_BLK_DEV is not set # CONFIG_MISC_DEVICES is not set @@ -480,7 +501,6 @@ CONFIG_HAVE_IDE=y # CONFIG_MD is not set # CONFIG_MACINTOSH_DRIVERS is not set CONFIG_NETDEVICES=y -CONFIG_COMPAT_NET_DEV_OPS=y # CONFIG_DUMMY is not set # CONFIG_BONDING is not set # CONFIG_MACVLAN is not set @@ -519,6 +539,7 @@ CONFIG_MII=y # CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set # CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set # CONFIG_B44 is not set +# CONFIG_KS8842 is not set CONFIG_FS_ENET=y # CONFIG_FS_ENET_HAS_SCC is not set CONFIG_FS_ENET_HAS_FEC=y @@ -590,6 +611,11 @@ CONFIG_GEN_RTC=y # CONFIG_TCG_TPM is not set # CONFIG_I2C is not set # CONFIG_SPI is not set + +# +# PPS support +# +# CONFIG_PPS is not set CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y # CONFIG_GPIOLIB is not set # CONFIG_W1 is not set @@ -613,22 +639,7 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_HTC_PASIC3 is not set # CONFIG_MFD_TMIO is not set # CONFIG_REGULATOR is not set - -# -# Multimedia devices -# - -# -# Multimedia core support -# -# CONFIG_VIDEO_DEV is not set -# CONFIG_DVB_CORE is not set -# CONFIG_VIDEO_MEDIA is not set - -# -# Multimedia drivers -# -CONFIG_DAB=y +# CONFIG_MEDIA_SUPPORT is not set # # Graphics support @@ -653,6 +664,10 @@ CONFIG_DAB=y # CONFIG_DMADEVICES is not set # CONFIG_AUXDISPLAY is not set # CONFIG_UIO is not set + +# +# TI VLYNQ +# # CONFIG_STAGING is not set # @@ -664,12 +679,15 @@ CONFIG_DAB=y # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set -CONFIG_FILE_LOCKING=y # CONFIG_XFS_FS is not set +# CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set # CONFIG_BTRFS_FS is not set +CONFIG_FILE_LOCKING=y +CONFIG_FSNOTIFY=y # CONFIG_DNOTIFY is not set # CONFIG_INOTIFY is not set +CONFIG_INOTIFY_USER=y # CONFIG_QUOTA is not set # CONFIG_AUTOFS_FS is not set # CONFIG_AUTOFS4_FS is not set @@ -786,6 +804,7 @@ CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y CONFIG_HAVE_LMB=y CONFIG_NLATTR=y +CONFIG_GENERIC_ATOMIC64=y # # Kernel hacking @@ -814,6 +833,9 @@ CONFIG_SCHED_DEBUG=y # CONFIG_SLUB_STATS is not set # CONFIG_DEBUG_SPINLOCK is not set # CONFIG_DEBUG_MUTEXES is not set +# CONFIG_DEBUG_LOCK_ALLOC is not set +# CONFIG_PROVE_LOCKING is not set +# CONFIG_LOCK_STAT is not set # CONFIG_DEBUG_SPINLOCK_SLEEP is not set # CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set # CONFIG_DEBUG_KOBJECT is not set @@ -825,7 +847,6 @@ CONFIG_DEBUG_INFO=y # CONFIG_DEBUG_LIST is not set # CONFIG_DEBUG_SG is not set # CONFIG_DEBUG_NOTIFIERS is not set -# CONFIG_BOOT_PRINTK_DELAY is not set # CONFIG_RCU_TORTURE_TEST is not set # CONFIG_RCU_CPU_STALL_DETECTOR is not set # CONFIG_BACKTRACE_SELF_TEST is not set @@ -838,16 +859,15 @@ CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y CONFIG_HAVE_DYNAMIC_FTRACE=y CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y CONFIG_TRACING_SUPPORT=y - -# -# Tracers -# +CONFIG_FTRACE=y # CONFIG_FUNCTION_TRACER is not set +# CONFIG_IRQSOFF_TRACER is not set # CONFIG_SCHED_TRACER is not set -# CONFIG_CONTEXT_SWITCH_TRACER is not set -# CONFIG_EVENT_TRACER is not set +# CONFIG_ENABLE_DEFAULT_TRACERS is not set # CONFIG_BOOT_TRACER is not set -# CONFIG_TRACE_BRANCH_PROFILING is not set +CONFIG_BRANCH_PROFILE_NONE=y +# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set +# CONFIG_PROFILE_ALL_BRANCHES is not set # CONFIG_STACK_TRACER is not set # CONFIG_KMEMTRACE is not set # CONFIG_WORKQUEUE_TRACER is not set @@ -855,6 +875,9 @@ CONFIG_TRACING_SUPPORT=y # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y # CONFIG_KGDB is not set +# CONFIG_KMEMCHECK is not set +# CONFIG_PPC_DISABLE_WERROR is not set +CONFIG_PPC_WERROR=y CONFIG_PRINT_STACK_DEPTH=64 # CONFIG_DEBUG_STACKOVERFLOW is not set # CONFIG_DEBUG_STACK_USAGE is not set diff --git a/arch/powerpc/configs/pq2fads_defconfig b/arch/powerpc/configs/pq2fads_defconfig index 129d80860f2..ff96bb43c32 100644 --- a/arch/powerpc/configs/pq2fads_defconfig +++ b/arch/powerpc/configs/pq2fads_defconfig @@ -1,25 +1,27 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.30-rc3 -# Wed May 13 17:22:02 2009 +# Linux kernel version: 2.6.31-rc4 +# Wed Jul 29 23:32:00 2009 # # CONFIG_PPC64 is not set # # Processor support # -CONFIG_6xx=y +CONFIG_PPC_BOOK3S_32=y # CONFIG_PPC_85xx is not set # CONFIG_PPC_8xx is not set # CONFIG_40x is not set # CONFIG_44x is not set # CONFIG_E200 is not set CONFIG_PPC_BOOK3S=y +CONFIG_6xx=y CONFIG_PPC_FPU=y # CONFIG_ALTIVEC is not set CONFIG_PPC_STD_MMU=y CONFIG_PPC_STD_MMU_32=y # CONFIG_PPC_MM_SLICES is not set +CONFIG_PPC_HAVE_PMU_SUPPORT=y # CONFIG_SMP is not set CONFIG_PPC32=y CONFIG_WORD_SIZE=32 @@ -30,15 +32,16 @@ CONFIG_GENERIC_TIME=y CONFIG_GENERIC_TIME_VSYSCALL=y CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_GENERIC_HARDIRQS=y +CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set CONFIG_IRQ_PER_CPU=y CONFIG_STACKTRACE_SUPPORT=y CONFIG_HAVE_LATENCYTOP_SUPPORT=y +CONFIG_TRACE_IRQFLAGS_SUPPORT=y CONFIG_LOCKDEP_SUPPORT=y CONFIG_RWSEM_XCHGADD_ALGORITHM=y CONFIG_ARCH_HAS_ILOG2_U32=y CONFIG_GENERIC_HWEIGHT=y -CONFIG_GENERIC_CALIBRATE_DELAY=y CONFIG_GENERIC_FIND_NEXT_BIT=y CONFIG_GENERIC_GPIO=y # CONFIG_ARCH_NO_VIRT_TO_BUS is not set @@ -53,11 +56,13 @@ CONFIG_OF=y # CONFIG_GENERIC_TBSYNC is not set CONFIG_AUDIT_ARCH=y CONFIG_GENERIC_BUG=y +CONFIG_DTC=y CONFIG_DEFAULT_UIMAGE=y # CONFIG_PPC_DCR_NATIVE is not set # CONFIG_PPC_DCR_MMIO is not set CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" +CONFIG_CONSTRUCTORS=y # # General setup @@ -103,7 +108,6 @@ CONFIG_SYSCTL_SYSCALL=y CONFIG_KALLSYMS=y CONFIG_KALLSYMS_ALL=y # CONFIG_KALLSYMS_EXTRA_PASS is not set -# CONFIG_STRIP_ASM_SYMS is not set CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y @@ -116,9 +120,16 @@ CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y CONFIG_AIO=y +CONFIG_HAVE_PERF_COUNTERS=y + +# +# Performance Counters +# +# CONFIG_PERF_COUNTERS is not set CONFIG_VM_EVENT_COUNTERS=y CONFIG_PCI_QUIRKS=y CONFIG_SLUB_DEBUG=y +# CONFIG_STRIP_ASM_SYMS is not set CONFIG_COMPAT_BRK=y # CONFIG_SLAB is not set CONFIG_SLUB=y @@ -132,6 +143,10 @@ CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_ARCH_TRACEHOOK=y CONFIG_HAVE_CLK=y + +# +# GCOV-based kernel profiling +# # CONFIG_SLOW_WORK is not set # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y @@ -139,7 +154,7 @@ CONFIG_RT_MUTEXES=y CONFIG_BASE_SMALL=0 # CONFIG_MODULES is not set CONFIG_BLOCK=y -# CONFIG_LBD is not set +CONFIG_LBDAF=y # CONFIG_BLK_DEV_INTEGRITY is not set # @@ -219,6 +234,7 @@ CONFIG_BINFMT_ELF=y # CONFIG_HAVE_AOUT is not set CONFIG_BINFMT_MISC=y # CONFIG_IOMMU_HELPER is not set +# CONFIG_SWIOTLB is not set CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y CONFIG_ARCH_HAS_WALK_MEMORY=y CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y @@ -234,9 +250,9 @@ CONFIG_MIGRATION=y CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y -CONFIG_UNEVICTABLE_LRU=y CONFIG_HAVE_MLOCK=y CONFIG_HAVE_MLOCKED_PAGE_BIT=y +CONFIG_DEFAULT_MMAP_MIN_ADDR=4096 CONFIG_PPC_4K_PAGES=y # CONFIG_PPC_16K_PAGES is not set # CONFIG_PPC_64K_PAGES is not set @@ -307,6 +323,7 @@ CONFIG_IP_PNP_BOOTP=y # CONFIG_NET_IPIP is not set # CONFIG_NET_IPGRE is not set # CONFIG_IP_MROUTE is not set +# CONFIG_ARPD is not set CONFIG_SYN_COOKIES=y # CONFIG_INET_AH is not set # CONFIG_INET_ESP is not set @@ -387,7 +404,11 @@ CONFIG_WIRELESS=y CONFIG_WIRELESS_OLD_REGULATORY=y # CONFIG_WIRELESS_EXT is not set # CONFIG_LIB80211 is not set -# CONFIG_MAC80211 is not set + +# +# CFG80211 needs to be enabled for MAC80211 +# +CONFIG_MAC80211_DEFAULT_PS_VALUE=0 # CONFIG_WIMAX is not set # CONFIG_RFKILL is not set @@ -493,6 +514,7 @@ CONFIG_MTD_PHYSMAP_OF=y # CONFIG_MTD_UBI is not set CONFIG_OF_DEVICE=y CONFIG_OF_GPIO=y +CONFIG_OF_MDIO=y # CONFIG_PARPORT is not set CONFIG_BLK_DEV=y # CONFIG_BLK_DEV_FD is not set @@ -518,6 +540,7 @@ CONFIG_MISC_DEVICES=y # EEPROM support # # CONFIG_EEPROM_93CX6 is not set +# CONFIG_CB710_CORE is not set CONFIG_HAVE_IDE=y CONFIG_IDE=y @@ -583,13 +606,17 @@ CONFIG_IDE_PROC_FS=y # # -# A new alternative FireWire stack is available with EXPERIMENTAL=y +# You can enable one or both FireWire driver stacks. +# + +# +# See the help texts for more information. # +# CONFIG_FIREWIRE is not set # CONFIG_IEEE1394 is not set # CONFIG_I2O is not set # CONFIG_MACINTOSH_DRIVERS is not set CONFIG_NETDEVICES=y -CONFIG_COMPAT_NET_DEV_OPS=y # CONFIG_DUMMY is not set # CONFIG_BONDING is not set # CONFIG_EQUALIZER is not set @@ -636,6 +663,7 @@ CONFIG_MII=y # CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set # CONFIG_NET_PCI is not set # CONFIG_B44 is not set +# CONFIG_KS8842 is not set # CONFIG_ATL2 is not set CONFIG_FS_ENET=y # CONFIG_FS_ENET_HAS_SCC is not set @@ -657,8 +685,10 @@ CONFIG_NETDEV_1000=y # CONFIG_VIA_VELOCITY is not set # CONFIG_TIGON3 is not set # CONFIG_BNX2 is not set +# CONFIG_CNIC is not set # CONFIG_FSL_PQ_MDIO is not set # CONFIG_GIANFAR is not set +# CONFIG_MV643XX_ETH is not set # CONFIG_QLA3XXX is not set # CONFIG_ATL1 is not set # CONFIG_JME is not set @@ -730,12 +760,13 @@ CONFIG_INPUT_EVDEV=y # CONFIG_INPUT_KEYBOARD=y CONFIG_KEYBOARD_ATKBD=y -# CONFIG_KEYBOARD_SUNKBD is not set # CONFIG_KEYBOARD_LKKBD is not set -# CONFIG_KEYBOARD_XTKBD is not set +# CONFIG_KEYBOARD_GPIO is not set +# CONFIG_KEYBOARD_MATRIX is not set # CONFIG_KEYBOARD_NEWTON is not set # CONFIG_KEYBOARD_STOWAWAY is not set -# CONFIG_KEYBOARD_GPIO is not set +# CONFIG_KEYBOARD_SUNKBD is not set +# CONFIG_KEYBOARD_XTKBD is not set CONFIG_INPUT_MOUSE=y CONFIG_MOUSE_PS2=y CONFIG_MOUSE_PS2_ALPS=y @@ -802,6 +833,10 @@ CONFIG_HW_RANDOM=y CONFIG_DEVPORT=y # CONFIG_I2C is not set # CONFIG_SPI is not set + +# +# PPS support +# CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y CONFIG_ARCH_REQUIRE_GPIOLIB=y CONFIG_GPIOLIB=y @@ -845,22 +880,7 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_HTC_PASIC3 is not set # CONFIG_MFD_TMIO is not set # CONFIG_REGULATOR is not set - -# -# Multimedia devices -# - -# -# Multimedia core support -# -# CONFIG_VIDEO_DEV is not set -# CONFIG_DVB_CORE is not set -# CONFIG_VIDEO_MEDIA is not set - -# -# Multimedia drivers -# -CONFIG_DAB=y +# CONFIG_MEDIA_SUPPORT is not set # # Graphics support @@ -903,8 +923,9 @@ CONFIG_USB_GADGET_SELECTED=y # CONFIG_USB_GADGET_OMAP is not set # CONFIG_USB_GADGET_PXA25X is not set # CONFIG_USB_GADGET_PXA27X is not set -# CONFIG_USB_GADGET_S3C2410 is not set +# CONFIG_USB_GADGET_S3C_HSOTG is not set # CONFIG_USB_GADGET_IMX is not set +# CONFIG_USB_GADGET_S3C2410 is not set CONFIG_USB_GADGET_M66592=y CONFIG_USB_M66592=y # CONFIG_USB_GADGET_AMD5536UDC is not set @@ -912,9 +933,11 @@ CONFIG_USB_M66592=y # CONFIG_USB_GADGET_CI13XXX is not set # CONFIG_USB_GADGET_NET2280 is not set # CONFIG_USB_GADGET_GOKU is not set +# CONFIG_USB_GADGET_LANGWELL is not set # CONFIG_USB_GADGET_DUMMY_HCD is not set CONFIG_USB_GADGET_DUALSPEED=y # CONFIG_USB_ZERO is not set +# CONFIG_USB_AUDIO is not set CONFIG_USB_ETH=y CONFIG_USB_ETH_RNDIS=y # CONFIG_USB_GADGETFS is not set @@ -939,6 +962,10 @@ CONFIG_USB_ETH_RNDIS=y # CONFIG_DMADEVICES is not set # CONFIG_AUXDISPLAY is not set # CONFIG_UIO is not set + +# +# TI VLYNQ +# # CONFIG_STAGING is not set # @@ -958,9 +985,10 @@ CONFIG_FS_MBCACHE=y # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set CONFIG_FS_POSIX_ACL=y -CONFIG_FILE_LOCKING=y # CONFIG_XFS_FS is not set # CONFIG_OCFS2_FS is not set +CONFIG_FILE_LOCKING=y +CONFIG_FSNOTIFY=y CONFIG_DNOTIFY=y CONFIG_INOTIFY=y CONFIG_INOTIFY_USER=y @@ -1110,6 +1138,7 @@ CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y CONFIG_HAVE_LMB=y CONFIG_NLATTR=y +CONFIG_GENERIC_ATOMIC64=y # # Kernel hacking @@ -1140,6 +1169,9 @@ CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0 # CONFIG_RT_MUTEX_TESTER is not set # CONFIG_DEBUG_SPINLOCK is not set # CONFIG_DEBUG_MUTEXES is not set +# CONFIG_DEBUG_LOCK_ALLOC is not set +# CONFIG_PROVE_LOCKING is not set +# CONFIG_LOCK_STAT is not set # CONFIG_DEBUG_SPINLOCK_SLEEP is not set # CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set # CONFIG_DEBUG_KOBJECT is not set @@ -1151,7 +1183,6 @@ CONFIG_DEBUG_INFO=y # CONFIG_DEBUG_LIST is not set # CONFIG_DEBUG_SG is not set # CONFIG_DEBUG_NOTIFIERS is not set -# CONFIG_BOOT_PRINTK_DELAY is not set # CONFIG_RCU_TORTURE_TEST is not set # CONFIG_RCU_CPU_STALL_DETECTOR is not set # CONFIG_BACKTRACE_SELF_TEST is not set @@ -1165,22 +1196,23 @@ CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y CONFIG_HAVE_DYNAMIC_FTRACE=y CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y CONFIG_TRACING_SUPPORT=y - -# -# Tracers -# +CONFIG_FTRACE=y # CONFIG_FUNCTION_TRACER is not set +# CONFIG_IRQSOFF_TRACER is not set # CONFIG_SCHED_TRACER is not set -# CONFIG_CONTEXT_SWITCH_TRACER is not set -# CONFIG_EVENT_TRACER is not set +# CONFIG_ENABLE_DEFAULT_TRACERS is not set # CONFIG_BOOT_TRACER is not set -# CONFIG_TRACE_BRANCH_PROFILING is not set +CONFIG_BRANCH_PROFILE_NONE=y +# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set +# CONFIG_PROFILE_ALL_BRANCHES is not set # CONFIG_STACK_TRACER is not set # CONFIG_KMEMTRACE is not set # CONFIG_WORKQUEUE_TRACER is not set # CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y +# CONFIG_PPC_DISABLE_WERROR is not set +CONFIG_PPC_WERROR=y CONFIG_PRINT_STACK_DEPTH=64 # CONFIG_DEBUG_STACKOVERFLOW is not set # CONFIG_DEBUG_STACK_USAGE is not set diff --git a/arch/powerpc/configs/prpmc2800_defconfig b/arch/powerpc/configs/prpmc2800_defconfig index e9f287f313f..1293c465d7f 100644 --- a/arch/powerpc/configs/prpmc2800_defconfig +++ b/arch/powerpc/configs/prpmc2800_defconfig @@ -1,25 +1,27 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.30-rc3 -# Wed May 13 17:22:03 2009 +# Linux kernel version: 2.6.31-rc4 +# Wed Jul 29 23:32:01 2009 # # CONFIG_PPC64 is not set # # Processor support # -CONFIG_6xx=y +CONFIG_PPC_BOOK3S_32=y # CONFIG_PPC_85xx is not set # CONFIG_PPC_8xx is not set # CONFIG_40x is not set # CONFIG_44x is not set # CONFIG_E200 is not set CONFIG_PPC_BOOK3S=y +CONFIG_6xx=y CONFIG_PPC_FPU=y CONFIG_ALTIVEC=y CONFIG_PPC_STD_MMU=y CONFIG_PPC_STD_MMU_32=y # CONFIG_PPC_MM_SLICES is not set +CONFIG_PPC_HAVE_PMU_SUPPORT=y # CONFIG_SMP is not set CONFIG_NOT_COHERENT_CACHE=y CONFIG_CHECK_CACHE_COHERENCY=y @@ -32,15 +34,16 @@ CONFIG_GENERIC_TIME=y CONFIG_GENERIC_TIME_VSYSCALL=y CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_GENERIC_HARDIRQS=y +CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set CONFIG_IRQ_PER_CPU=y CONFIG_STACKTRACE_SUPPORT=y CONFIG_HAVE_LATENCYTOP_SUPPORT=y +CONFIG_TRACE_IRQFLAGS_SUPPORT=y CONFIG_LOCKDEP_SUPPORT=y CONFIG_RWSEM_XCHGADD_ALGORITHM=y CONFIG_ARCH_HAS_ILOG2_U32=y CONFIG_GENERIC_HWEIGHT=y -CONFIG_GENERIC_CALIBRATE_DELAY=y CONFIG_GENERIC_FIND_NEXT_BIT=y # CONFIG_ARCH_NO_VIRT_TO_BUS is not set CONFIG_PPC=y @@ -54,11 +57,13 @@ CONFIG_OF=y # CONFIG_GENERIC_TBSYNC is not set CONFIG_AUDIT_ARCH=y CONFIG_GENERIC_BUG=y +CONFIG_DTC=y # CONFIG_DEFAULT_UIMAGE is not set # CONFIG_PPC_DCR_NATIVE is not set # CONFIG_PPC_DCR_MMIO is not set CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" +CONFIG_CONSTRUCTORS=y # # General setup @@ -114,7 +119,6 @@ CONFIG_ANON_INODES=y CONFIG_SYSCTL_SYSCALL=y CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_EXTRA_PASS is not set -# CONFIG_STRIP_ASM_SYMS is not set CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y @@ -127,9 +131,16 @@ CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y CONFIG_AIO=y +CONFIG_HAVE_PERF_COUNTERS=y + +# +# Performance Counters +# +# CONFIG_PERF_COUNTERS is not set CONFIG_VM_EVENT_COUNTERS=y CONFIG_PCI_QUIRKS=y CONFIG_SLUB_DEBUG=y +# CONFIG_STRIP_ASM_SYMS is not set CONFIG_COMPAT_BRK=y # CONFIG_SLAB is not set CONFIG_SLUB=y @@ -142,6 +153,10 @@ CONFIG_HAVE_IOREMAP_PROT=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_ARCH_TRACEHOOK=y + +# +# GCOV-based kernel profiling +# # CONFIG_SLOW_WORK is not set # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y @@ -149,7 +164,7 @@ CONFIG_RT_MUTEXES=y CONFIG_BASE_SMALL=0 # CONFIG_MODULES is not set CONFIG_BLOCK=y -CONFIG_LBD=y +CONFIG_LBDAF=y # CONFIG_BLK_DEV_BSG is not set # CONFIG_BLK_DEV_INTEGRITY is not set @@ -228,6 +243,7 @@ CONFIG_BINFMT_ELF=y # CONFIG_HAVE_AOUT is not set CONFIG_BINFMT_MISC=y # CONFIG_IOMMU_HELPER is not set +# CONFIG_SWIOTLB is not set CONFIG_PPC_NEED_DMA_SYNC_OPS=y CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y CONFIG_ARCH_HAS_WALK_MEMORY=y @@ -249,9 +265,9 @@ CONFIG_MIGRATION=y CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y -CONFIG_UNEVICTABLE_LRU=y CONFIG_HAVE_MLOCK=y CONFIG_HAVE_MLOCKED_PAGE_BIT=y +CONFIG_DEFAULT_MMAP_MIN_ADDR=4096 CONFIG_PPC_4K_PAGES=y # CONFIG_PPC_16K_PAGES is not set # CONFIG_PPC_64K_PAGES is not set @@ -296,6 +312,7 @@ CONFIG_PAGE_OFFSET=0xc0000000 CONFIG_KERNEL_START=0xc0000000 CONFIG_PHYSICAL_START=0x00000000 CONFIG_TASK_SIZE=0xc0000000 +CONFIG_CONSISTENT_SIZE=0x00200000 CONFIG_NET=y # @@ -357,6 +374,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set # CONFIG_PHONET is not set +# CONFIG_IEEE802154 is not set # CONFIG_NET_SCHED is not set # CONFIG_DCB is not set @@ -374,7 +392,11 @@ CONFIG_WIRELESS=y CONFIG_WIRELESS_OLD_REGULATORY=y # CONFIG_WIRELESS_EXT is not set # CONFIG_LIB80211 is not set -# CONFIG_MAC80211 is not set + +# +# CFG80211 needs to be enabled for MAC80211 +# +CONFIG_MAC80211_DEFAULT_PS_VALUE=0 # CONFIG_WIMAX is not set # CONFIG_RFKILL is not set # CONFIG_NET_9P is not set @@ -479,6 +501,7 @@ CONFIG_MTD_PHYSMAP_OF=y # CONFIG_MTD_UBI is not set CONFIG_OF_DEVICE=y CONFIG_OF_I2C=y +CONFIG_OF_MDIO=y # CONFIG_PARPORT is not set CONFIG_BLK_DEV=y # CONFIG_BLK_DEV_FD is not set @@ -514,7 +537,9 @@ CONFIG_MISC_DEVICES=y # # CONFIG_EEPROM_AT24 is not set # CONFIG_EEPROM_LEGACY is not set +# CONFIG_EEPROM_MAX6875 is not set # CONFIG_EEPROM_93CX6 is not set +# CONFIG_CB710_CORE is not set CONFIG_HAVE_IDE=y CONFIG_IDE=y @@ -591,10 +616,6 @@ CONFIG_BLK_DEV_SD=y # CONFIG_BLK_DEV_SR is not set # CONFIG_CHR_DEV_SG is not set # CONFIG_CHR_DEV_SCH is not set - -# -# Some SCSI devices (e.g. CD jukebox) support multiple LUNs -# # CONFIG_SCSI_MULTI_LUN is not set # CONFIG_SCSI_CONSTANTS is not set # CONFIG_SCSI_LOGGING is not set @@ -611,6 +632,7 @@ CONFIG_BLK_DEV_SD=y CONFIG_SCSI_LOWLEVEL=y # CONFIG_ISCSI_TCP is not set # CONFIG_SCSI_CXGB3_ISCSI is not set +# CONFIG_SCSI_BNX2_ISCSI is not set # CONFIG_BLK_DEV_3W_XXXX_RAID is not set # CONFIG_SCSI_3W_9XXX is not set # CONFIG_SCSI_ACARD is not set @@ -619,6 +641,7 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_SCSI_AIC7XXX_OLD is not set # CONFIG_SCSI_AIC79XX is not set # CONFIG_SCSI_AIC94XX is not set +# CONFIG_SCSI_MVSAS is not set # CONFIG_SCSI_DPT_I2O is not set # CONFIG_SCSI_ADVANSYS is not set # CONFIG_SCSI_ARCMSR is not set @@ -638,7 +661,6 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_SCSI_IPS is not set # CONFIG_SCSI_INITIO is not set # CONFIG_SCSI_INIA100 is not set -# CONFIG_SCSI_MVSAS is not set # CONFIG_SCSI_STEX is not set # CONFIG_SCSI_SYM53C8XX_2 is not set # CONFIG_SCSI_IPR is not set @@ -721,7 +743,11 @@ CONFIG_SATA_MV=y # # -# Enable only one of the two stacks, unless you know what you are doing +# You can enable one or both FireWire driver stacks. +# + +# +# See the help texts for more information. # # CONFIG_FIREWIRE is not set # CONFIG_IEEE1394 is not set @@ -730,7 +756,6 @@ CONFIG_MACINTOSH_DRIVERS=y # CONFIG_MAC_EMUMOUSEBTN is not set # CONFIG_WINDFARM is not set CONFIG_NETDEVICES=y -CONFIG_COMPAT_NET_DEV_OPS=y # CONFIG_DUMMY is not set # CONFIG_BONDING is not set # CONFIG_MACVLAN is not set @@ -797,6 +822,7 @@ CONFIG_8139TOO=y # CONFIG_SMSC9420 is not set # CONFIG_SUNDANCE is not set # CONFIG_TLAN is not set +# CONFIG_KS8842 is not set # CONFIG_VIA_RHINE is not set # CONFIG_SC92031 is not set # CONFIG_ATL2 is not set @@ -818,6 +844,7 @@ CONFIG_E1000=y # CONFIG_VIA_VELOCITY is not set # CONFIG_TIGON3 is not set # CONFIG_BNX2 is not set +# CONFIG_CNIC is not set CONFIG_MV643XX_ETH=y # CONFIG_QLA3XXX is not set # CONFIG_ATL1 is not set @@ -1007,13 +1034,17 @@ CONFIG_I2C_MV64XXX=y # CONFIG_SENSORS_PCF8574 is not set # CONFIG_PCF8575 is not set # CONFIG_SENSORS_PCA9539 is not set -# CONFIG_SENSORS_MAX6875 is not set # CONFIG_SENSORS_TSL2550 is not set # CONFIG_I2C_DEBUG_CORE is not set # CONFIG_I2C_DEBUG_ALGO is not set # CONFIG_I2C_DEBUG_BUS is not set # CONFIG_I2C_DEBUG_CHIP is not set # CONFIG_SPI is not set + +# +# PPS support +# +# CONFIG_PPS is not set CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y # CONFIG_GPIOLIB is not set # CONFIG_W1 is not set @@ -1068,6 +1099,7 @@ CONFIG_HWMON=y # CONFIG_SENSORS_SMSC47B397 is not set # CONFIG_SENSORS_ADS7828 is not set # CONFIG_SENSORS_THMC50 is not set +# CONFIG_SENSORS_TMP401 is not set # CONFIG_SENSORS_VIA686A is not set # CONFIG_SENSORS_VT1211 is not set # CONFIG_SENSORS_VT8231 is not set @@ -1102,23 +1134,9 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_MFD_WM8400 is not set # CONFIG_MFD_WM8350_I2C is not set # CONFIG_MFD_PCF50633 is not set +# CONFIG_AB3100_CORE is not set # CONFIG_REGULATOR is not set - -# -# Multimedia devices -# - -# -# Multimedia core support -# -# CONFIG_VIDEO_DEV is not set -# CONFIG_DVB_CORE is not set -# CONFIG_VIDEO_MEDIA is not set - -# -# Multimedia drivers -# -# CONFIG_DAB is not set +# CONFIG_MEDIA_SUPPORT is not set # # Graphics support @@ -1163,6 +1181,7 @@ CONFIG_HID_BELKIN=y CONFIG_HID_CHERRY=y CONFIG_HID_CHICONY=y CONFIG_HID_CYPRESS=y +CONFIG_HID_DRAGONRISE=y # CONFIG_DRAGONRISE_FF is not set CONFIG_HID_EZKEY=y CONFIG_HID_KYE=y @@ -1180,9 +1199,14 @@ CONFIG_HID_PETALYNX=y CONFIG_HID_SAMSUNG=y CONFIG_HID_SONY=y CONFIG_HID_SUNPLUS=y +CONFIG_HID_GREENASIA=y # CONFIG_GREENASIA_FF is not set +CONFIG_HID_SMARTJOYPLUS=y +# CONFIG_SMARTJOYPLUS_FF is not set CONFIG_HID_TOPSEED=y +CONFIG_HID_THRUSTMASTER=y CONFIG_THRUSTMASTER_FF=y +CONFIG_HID_ZEROPLUS=y CONFIG_ZEROPLUS_FF=y CONFIG_USB_SUPPORT=y CONFIG_USB_ARCH_HAS_HCD=y @@ -1207,6 +1231,7 @@ CONFIG_USB_MON=y # USB Host Controller Drivers # # CONFIG_USB_C67X00_HCD is not set +# CONFIG_USB_XHCI_HCD is not set CONFIG_USB_EHCI_HCD=y # CONFIG_USB_EHCI_ROOT_HUB_TT is not set # CONFIG_USB_EHCI_TT_NEWSCHED is not set @@ -1215,6 +1240,8 @@ CONFIG_USB_EHCI_HCD_PPC_OF=y # CONFIG_USB_ISP116X_HCD is not set # CONFIG_USB_ISP1760_HCD is not set CONFIG_USB_OHCI_HCD=y +# CONFIG_USB_OHCI_HCD_PPC_OF_BE is not set +# CONFIG_USB_OHCI_HCD_PPC_OF_LE is not set # CONFIG_USB_OHCI_HCD_PPC_OF is not set # CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set # CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set @@ -1322,6 +1349,7 @@ CONFIG_RTC_DRV_MAX6900=y # CONFIG_RTC_DRV_S35390A is not set # CONFIG_RTC_DRV_FM3130 is not set # CONFIG_RTC_DRV_RX8581 is not set +# CONFIG_RTC_DRV_RX8025 is not set # # SPI RTC drivers @@ -1349,6 +1377,10 @@ CONFIG_RTC_DRV_MAX6900=y # CONFIG_DMADEVICES is not set # CONFIG_AUXDISPLAY is not set # CONFIG_UIO is not set + +# +# TI VLYNQ +# # CONFIG_STAGING is not set # @@ -1368,11 +1400,12 @@ CONFIG_FS_MBCACHE=y # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set -CONFIG_FILE_LOCKING=y # CONFIG_XFS_FS is not set # CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set # CONFIG_BTRFS_FS is not set +CONFIG_FILE_LOCKING=y +CONFIG_FSNOTIFY=y CONFIG_DNOTIFY=y CONFIG_INOTIFY=y CONFIG_INOTIFY_USER=y @@ -1469,7 +1502,46 @@ CONFIG_MSDOS_PARTITION=y # CONFIG_KARMA_PARTITION is not set # CONFIG_EFI_PARTITION is not set # CONFIG_SYSV68_PARTITION is not set -# CONFIG_NLS is not set +CONFIG_NLS=y +CONFIG_NLS_DEFAULT="iso8859-1" +# CONFIG_NLS_CODEPAGE_437 is not set +# CONFIG_NLS_CODEPAGE_737 is not set +# CONFIG_NLS_CODEPAGE_775 is not set +# CONFIG_NLS_CODEPAGE_850 is not set +# CONFIG_NLS_CODEPAGE_852 is not set +# CONFIG_NLS_CODEPAGE_855 is not set +# CONFIG_NLS_CODEPAGE_857 is not set +# CONFIG_NLS_CODEPAGE_860 is not set +# CONFIG_NLS_CODEPAGE_861 is not set +# CONFIG_NLS_CODEPAGE_862 is not set +# CONFIG_NLS_CODEPAGE_863 is not set +# CONFIG_NLS_CODEPAGE_864 is not set +# CONFIG_NLS_CODEPAGE_865 is not set +# CONFIG_NLS_CODEPAGE_866 is not set +# CONFIG_NLS_CODEPAGE_869 is not set +# CONFIG_NLS_CODEPAGE_936 is not set +# CONFIG_NLS_CODEPAGE_950 is not set +# CONFIG_NLS_CODEPAGE_932 is not set +# CONFIG_NLS_CODEPAGE_949 is not set +# CONFIG_NLS_CODEPAGE_874 is not set +# CONFIG_NLS_ISO8859_8 is not set +# CONFIG_NLS_CODEPAGE_1250 is not set +# CONFIG_NLS_CODEPAGE_1251 is not set +# CONFIG_NLS_ASCII is not set +# CONFIG_NLS_ISO8859_1 is not set +# CONFIG_NLS_ISO8859_2 is not set +# CONFIG_NLS_ISO8859_3 is not set +# CONFIG_NLS_ISO8859_4 is not set +# CONFIG_NLS_ISO8859_5 is not set +# CONFIG_NLS_ISO8859_6 is not set +# CONFIG_NLS_ISO8859_7 is not set +# CONFIG_NLS_ISO8859_9 is not set +# CONFIG_NLS_ISO8859_13 is not set +# CONFIG_NLS_ISO8859_14 is not set +# CONFIG_NLS_ISO8859_15 is not set +# CONFIG_NLS_KOI8_R is not set +# CONFIG_NLS_KOI8_U is not set +# CONFIG_NLS_UTF8 is not set # CONFIG_DLM is not set # CONFIG_BINARY_PRINTF is not set @@ -1494,6 +1566,7 @@ CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y CONFIG_HAVE_LMB=y CONFIG_NLATTR=y +CONFIG_GENERIC_ATOMIC64=y # # Kernel hacking @@ -1519,22 +1592,11 @@ CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y CONFIG_HAVE_DYNAMIC_FTRACE=y CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y CONFIG_TRACING_SUPPORT=y - -# -# Tracers -# -# CONFIG_FUNCTION_TRACER is not set -# CONFIG_SCHED_TRACER is not set -# CONFIG_CONTEXT_SWITCH_TRACER is not set -# CONFIG_EVENT_TRACER is not set -# CONFIG_BOOT_TRACER is not set -# CONFIG_TRACE_BRANCH_PROFILING is not set -# CONFIG_STACK_TRACER is not set -# CONFIG_KMEMTRACE is not set -# CONFIG_WORKQUEUE_TRACER is not set -# CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_FTRACE is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y +# CONFIG_PPC_DISABLE_WERROR is not set +CONFIG_PPC_WERROR=y CONFIG_PRINT_STACK_DEPTH=64 # CONFIG_IRQSTACKS is not set # CONFIG_BOOTX_TEXT is not set diff --git a/arch/powerpc/configs/storcenter_defconfig b/arch/powerpc/configs/storcenter_defconfig index bd4a8d435c5..28384dc0100 100644 --- a/arch/powerpc/configs/storcenter_defconfig +++ b/arch/powerpc/configs/storcenter_defconfig @@ -1,25 +1,27 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.30-rc3 -# Wed May 13 17:22:04 2009 +# Linux kernel version: 2.6.31-rc4 +# Wed Jul 29 23:32:01 2009 # # CONFIG_PPC64 is not set # # Processor support # -CONFIG_6xx=y +CONFIG_PPC_BOOK3S_32=y # CONFIG_PPC_85xx is not set # CONFIG_PPC_8xx is not set # CONFIG_40x is not set # CONFIG_44x is not set # CONFIG_E200 is not set CONFIG_PPC_BOOK3S=y +CONFIG_6xx=y CONFIG_PPC_FPU=y # CONFIG_ALTIVEC is not set CONFIG_PPC_STD_MMU=y CONFIG_PPC_STD_MMU_32=y # CONFIG_PPC_MM_SLICES is not set +CONFIG_PPC_HAVE_PMU_SUPPORT=y # CONFIG_SMP is not set CONFIG_PPC32=y CONFIG_WORD_SIZE=32 @@ -30,15 +32,16 @@ CONFIG_GENERIC_TIME=y CONFIG_GENERIC_TIME_VSYSCALL=y CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_GENERIC_HARDIRQS=y +CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set CONFIG_IRQ_PER_CPU=y CONFIG_STACKTRACE_SUPPORT=y CONFIG_HAVE_LATENCYTOP_SUPPORT=y +CONFIG_TRACE_IRQFLAGS_SUPPORT=y CONFIG_LOCKDEP_SUPPORT=y CONFIG_RWSEM_XCHGADD_ALGORITHM=y CONFIG_ARCH_HAS_ILOG2_U32=y CONFIG_GENERIC_HWEIGHT=y -CONFIG_GENERIC_CALIBRATE_DELAY=y CONFIG_GENERIC_FIND_NEXT_BIT=y # CONFIG_ARCH_NO_VIRT_TO_BUS is not set CONFIG_PPC=y @@ -52,11 +55,13 @@ CONFIG_PPC_UDBG_16550=y # CONFIG_GENERIC_TBSYNC is not set CONFIG_AUDIT_ARCH=y CONFIG_GENERIC_BUG=y +CONFIG_DTC=y # CONFIG_DEFAULT_UIMAGE is not set # CONFIG_PPC_DCR_NATIVE is not set # CONFIG_PPC_DCR_MMIO is not set CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" +CONFIG_CONSTRUCTORS=y # # General setup @@ -101,7 +106,6 @@ CONFIG_ANON_INODES=y CONFIG_EMBEDDED=y CONFIG_SYSCTL_SYSCALL=y # CONFIG_KALLSYMS is not set -# CONFIG_STRIP_ASM_SYMS is not set CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y @@ -114,9 +118,16 @@ CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y CONFIG_AIO=y +CONFIG_HAVE_PERF_COUNTERS=y + +# +# Performance Counters +# +# CONFIG_PERF_COUNTERS is not set CONFIG_VM_EVENT_COUNTERS=y CONFIG_PCI_QUIRKS=y CONFIG_SLUB_DEBUG=y +# CONFIG_STRIP_ASM_SYMS is not set CONFIG_COMPAT_BRK=y # CONFIG_SLAB is not set CONFIG_SLUB=y @@ -129,6 +140,10 @@ CONFIG_HAVE_IOREMAP_PROT=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_ARCH_TRACEHOOK=y + +# +# GCOV-based kernel profiling +# # CONFIG_SLOW_WORK is not set # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y @@ -141,7 +156,7 @@ CONFIG_MODULE_UNLOAD=y # CONFIG_MODVERSIONS is not set # CONFIG_MODULE_SRCVERSION_ALL is not set CONFIG_BLOCK=y -CONFIG_LBD=y +CONFIG_LBDAF=y # CONFIG_BLK_DEV_BSG is not set # CONFIG_BLK_DEV_INTEGRITY is not set @@ -222,6 +237,7 @@ CONFIG_BINFMT_ELF=y # CONFIG_HAVE_AOUT is not set CONFIG_BINFMT_MISC=y # CONFIG_IOMMU_HELPER is not set +# CONFIG_SWIOTLB is not set CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y CONFIG_ARCH_HAS_WALK_MEMORY=y CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y @@ -242,9 +258,9 @@ CONFIG_MIGRATION=y CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y -CONFIG_UNEVICTABLE_LRU=y CONFIG_HAVE_MLOCK=y CONFIG_HAVE_MLOCKED_PAGE_BIT=y +CONFIG_DEFAULT_MMAP_MIN_ADDR=4096 CONFIG_PPC_4K_PAGES=y # CONFIG_PPC_16K_PAGES is not set # CONFIG_PPC_64K_PAGES is not set @@ -347,6 +363,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set # CONFIG_PHONET is not set +# CONFIG_IEEE802154 is not set # CONFIG_NET_SCHED is not set # CONFIG_DCB is not set @@ -364,7 +381,11 @@ CONFIG_WIRELESS=y CONFIG_WIRELESS_OLD_REGULATORY=y # CONFIG_WIRELESS_EXT is not set # CONFIG_LIB80211 is not set -# CONFIG_MAC80211 is not set + +# +# CFG80211 needs to be enabled for MAC80211 +# +CONFIG_MAC80211_DEFAULT_PS_VALUE=0 # CONFIG_WIMAX is not set # CONFIG_RFKILL is not set # CONFIG_NET_9P is not set @@ -501,7 +522,9 @@ CONFIG_MISC_DEVICES=y # # CONFIG_EEPROM_AT24 is not set # CONFIG_EEPROM_LEGACY is not set +# CONFIG_EEPROM_MAX6875 is not set # CONFIG_EEPROM_93CX6 is not set +# CONFIG_CB710_CORE is not set CONFIG_HAVE_IDE=y CONFIG_IDE=y @@ -579,10 +602,6 @@ CONFIG_BLK_DEV_SR=y # CONFIG_BLK_DEV_SR_VENDOR is not set # CONFIG_CHR_DEV_SG is not set # CONFIG_CHR_DEV_SCH is not set - -# -# Some SCSI devices (e.g. CD jukebox) support multiple LUNs -# # CONFIG_SCSI_MULTI_LUN is not set # CONFIG_SCSI_CONSTANTS is not set # CONFIG_SCSI_LOGGING is not set @@ -599,6 +618,7 @@ CONFIG_SCSI_SPI_ATTRS=y # CONFIG_SCSI_SRP_ATTRS is not set CONFIG_SCSI_LOWLEVEL=y # CONFIG_ISCSI_TCP is not set +# CONFIG_SCSI_BNX2_ISCSI is not set # CONFIG_BLK_DEV_3W_XXXX_RAID is not set # CONFIG_SCSI_3W_9XXX is not set # CONFIG_SCSI_ACARD is not set @@ -607,6 +627,7 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_SCSI_AIC7XXX_OLD is not set # CONFIG_SCSI_AIC79XX is not set # CONFIG_SCSI_AIC94XX is not set +# CONFIG_SCSI_MVSAS is not set # CONFIG_SCSI_DPT_I2O is not set # CONFIG_SCSI_ADVANSYS is not set # CONFIG_SCSI_ARCMSR is not set @@ -626,7 +647,6 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_SCSI_IPS is not set # CONFIG_SCSI_INITIO is not set # CONFIG_SCSI_INIA100 is not set -# CONFIG_SCSI_MVSAS is not set # CONFIG_SCSI_STEX is not set # CONFIG_SCSI_SYM53C8XX_2 is not set # CONFIG_SCSI_QLOGIC_1280 is not set @@ -660,14 +680,17 @@ CONFIG_MD_RAID6_PQ=y # # -# Enable only one of the two stacks, unless you know what you are doing +# You can enable one or both FireWire driver stacks. +# + +# +# See the help texts for more information. # # CONFIG_FIREWIRE is not set # CONFIG_IEEE1394 is not set # CONFIG_I2O is not set # CONFIG_MACINTOSH_DRIVERS is not set CONFIG_NETDEVICES=y -CONFIG_COMPAT_NET_DEV_OPS=y CONFIG_DUMMY=m # CONFIG_BONDING is not set # CONFIG_MACVLAN is not set @@ -695,8 +718,10 @@ CONFIG_R8169=y # CONFIG_VIA_VELOCITY is not set # CONFIG_TIGON3 is not set # CONFIG_BNX2 is not set +# CONFIG_CNIC is not set # CONFIG_FSL_PQ_MDIO is not set # CONFIG_GIANFAR is not set +# CONFIG_MV643XX_ETH is not set # CONFIG_QLA3XXX is not set # CONFIG_ATL1 is not set # CONFIG_ATL1E is not set @@ -845,13 +870,17 @@ CONFIG_I2C_MPC=y # CONFIG_SENSORS_PCF8574 is not set # CONFIG_PCF8575 is not set # CONFIG_SENSORS_PCA9539 is not set -# CONFIG_SENSORS_MAX6875 is not set # CONFIG_SENSORS_TSL2550 is not set # CONFIG_I2C_DEBUG_CORE is not set # CONFIG_I2C_DEBUG_ALGO is not set # CONFIG_I2C_DEBUG_BUS is not set # CONFIG_I2C_DEBUG_CHIP is not set # CONFIG_SPI is not set + +# +# PPS support +# +# CONFIG_PPS is not set CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y # CONFIG_GPIOLIB is not set # CONFIG_W1 is not set @@ -879,23 +908,9 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_MFD_WM8400 is not set # CONFIG_MFD_WM8350_I2C is not set # CONFIG_MFD_PCF50633 is not set +# CONFIG_AB3100_CORE is not set # CONFIG_REGULATOR is not set - -# -# Multimedia devices -# - -# -# Multimedia core support -# -# CONFIG_VIDEO_DEV is not set -# CONFIG_DVB_CORE is not set -# CONFIG_VIDEO_MEDIA is not set - -# -# Multimedia drivers -# -# CONFIG_DAB is not set +# CONFIG_MEDIA_SUPPORT is not set # # Graphics support @@ -937,6 +952,7 @@ CONFIG_USB_DEVICE_CLASS=y # USB Host Controller Drivers # # CONFIG_USB_C67X00_HCD is not set +# CONFIG_USB_XHCI_HCD is not set CONFIG_USB_EHCI_HCD=y # CONFIG_USB_EHCI_ROOT_HUB_TT is not set # CONFIG_USB_EHCI_TT_NEWSCHED is not set @@ -946,6 +962,8 @@ CONFIG_USB_EHCI_HCD_PPC_OF=y # CONFIG_USB_ISP116X_HCD is not set # CONFIG_USB_ISP1760_HCD is not set CONFIG_USB_OHCI_HCD=y +# CONFIG_USB_OHCI_HCD_PPC_OF_BE is not set +# CONFIG_USB_OHCI_HCD_PPC_OF_LE is not set # CONFIG_USB_OHCI_HCD_PPC_OF is not set # CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set # CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set @@ -1064,6 +1082,7 @@ CONFIG_RTC_DRV_DS1307=y # CONFIG_RTC_DRV_S35390A is not set # CONFIG_RTC_DRV_FM3130 is not set # CONFIG_RTC_DRV_RX8581 is not set +# CONFIG_RTC_DRV_RX8025 is not set # # SPI RTC drivers @@ -1091,6 +1110,10 @@ CONFIG_RTC_DRV_DS1307=y # CONFIG_DMADEVICES is not set # CONFIG_AUXDISPLAY is not set # CONFIG_UIO is not set + +# +# TI VLYNQ +# # CONFIG_STAGING is not set # @@ -1110,7 +1133,6 @@ CONFIG_FS_MBCACHE=y # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set -CONFIG_FILE_LOCKING=y CONFIG_XFS_FS=m # CONFIG_XFS_QUOTA is not set # CONFIG_XFS_POSIX_ACL is not set @@ -1119,6 +1141,8 @@ CONFIG_XFS_FS=m # CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set # CONFIG_BTRFS_FS is not set +CONFIG_FILE_LOCKING=y +CONFIG_FSNOTIFY=y CONFIG_DNOTIFY=y CONFIG_INOTIFY=y CONFIG_INOTIFY_USER=y @@ -1273,6 +1297,7 @@ CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y CONFIG_HAVE_LMB=y CONFIG_NLATTR=y +CONFIG_GENERIC_ATOMIC64=y # # Kernel hacking @@ -1298,22 +1323,11 @@ CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y CONFIG_HAVE_DYNAMIC_FTRACE=y CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y CONFIG_TRACING_SUPPORT=y - -# -# Tracers -# -# CONFIG_FUNCTION_TRACER is not set -# CONFIG_SCHED_TRACER is not set -# CONFIG_CONTEXT_SWITCH_TRACER is not set -# CONFIG_EVENT_TRACER is not set -# CONFIG_BOOT_TRACER is not set -# CONFIG_TRACE_BRANCH_PROFILING is not set -# CONFIG_STACK_TRACER is not set -# CONFIG_KMEMTRACE is not set -# CONFIG_WORKQUEUE_TRACER is not set -# CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_FTRACE is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y +# CONFIG_PPC_DISABLE_WERROR is not set +CONFIG_PPC_WERROR=y CONFIG_PRINT_STACK_DEPTH=64 # CONFIG_IRQSTACKS is not set # CONFIG_BOOTX_TEXT is not set -- cgit v1.2.3 From f294526279cda8934b0313ebd02184a16ba888c9 Mon Sep 17 00:00:00 2001 From: Dan Carpenter Date: Sun, 19 Jul 2009 14:46:09 +0300 Subject: lguest: dereferencing freed mem in add_eventfd() "new" was freed and then dereferenced. Also the return value wasn't being used so I modified the caller as well. Compile tested only. Found by smatch (http://repo.or.cz/w/smatch.git). regards, dan carpenter Signed-off-by: Dan Carpenter Signed-off-by: Rusty Russell --- drivers/lguest/lguest_user.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) diff --git a/drivers/lguest/lguest_user.c b/drivers/lguest/lguest_user.c index 9f9a2953b38..407722a8e0c 100644 --- a/drivers/lguest/lguest_user.c +++ b/drivers/lguest/lguest_user.c @@ -52,8 +52,9 @@ static int add_eventfd(struct lguest *lg, unsigned long addr, int fd) new->map[new->num].addr = addr; new->map[new->num].event = eventfd_ctx_fdget(fd); if (IS_ERR(new->map[new->num].event)) { + int err = PTR_ERR(new->map[new->num].event); kfree(new); - return PTR_ERR(new->map[new->num].event); + return err; } new->num++; @@ -83,7 +84,7 @@ static int attach_eventfd(struct lguest *lg, const unsigned long __user *input) err = add_eventfd(lg, addr, fd); mutex_unlock(&lguest_lock); - return 0; + return err; } /*L:050 Sending an interrupt is done by writing LHREQ_IRQ and an interrupt -- cgit v1.2.3 From 8ef562d112c82ec539775698f8b63ac5ec1bd766 Mon Sep 17 00:00:00 2001 From: Rusty Russell Date: Thu, 30 Jul 2009 16:03:43 -0600 Subject: lguest: fix descriptor corruption in example launcher 1d589bb16b825b3a7b4edd34d997f1f1f953033d "Add serial number support for virtio_blk, V4a" extended 'struct virtio_blk_config' to 536 bytes. Lguest and S/390 both use an 8 bit value for the feature length, and this change broke them (if the code is naive). Signed-off-by: Rusty Russell Cc: John Cooper Cc: Christian Borntraeger --- Documentation/lguest/lguest.c | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-) diff --git a/Documentation/lguest/lguest.c b/Documentation/lguest/lguest.c index 9ebcd6ef361..45d7d6dcae7 100644 --- a/Documentation/lguest/lguest.c +++ b/Documentation/lguest/lguest.c @@ -1105,6 +1105,9 @@ static void set_config(struct device *dev, unsigned len, const void *conf) /* Copy in the config information, and store the length. */ memcpy(device_config(dev), conf, len); dev->desc->config_len = len; + + /* Size must fit in config_len field (8 bits)! */ + assert(dev->desc->config_len == len); } /* This routine does all the creation and setup of a new device, including @@ -1515,7 +1518,8 @@ static void setup_block_file(const char *filename) add_feature(dev, VIRTIO_BLK_F_SEG_MAX); conf.seg_max = cpu_to_le32(VIRTQUEUE_NUM - 2); - set_config(dev, sizeof(conf), &conf); + /* Don't try to put whole struct: we have 8 bit limit. */ + set_config(dev, offsetof(struct virtio_blk_config, geometry), &conf); verbose("device %u: virtblock %llu sectors\n", ++devices.device_num, le64_to_cpu(conf.capacity)); -- cgit v1.2.3 From ff52c3fc7188855ede75d87b022271f0da309e5b Mon Sep 17 00:00:00 2001 From: "Michael S. Tsirkin" Date: Thu, 23 Jul 2009 14:57:37 +0300 Subject: virtio: fix memory leak on device removal Make vp_free_vectors do the reverse of vq_request_vectors. Signed-off-by: Michael S. Tsirkin Signed-off-by: Rusty Russell --- drivers/virtio/virtio_pci.c | 28 +++++++++++++++------------- 1 file changed, 15 insertions(+), 13 deletions(-) diff --git a/drivers/virtio/virtio_pci.c b/drivers/virtio/virtio_pci.c index bcec78ffc76..ca40517ef9c 100644 --- a/drivers/virtio/virtio_pci.c +++ b/drivers/virtio/virtio_pci.c @@ -258,7 +258,6 @@ static void vp_free_vectors(struct virtio_device *vdev) for (i = 0; i < vp_dev->msix_used_vectors; ++i) free_irq(vp_dev->msix_entries[i].vector, vp_dev); - vp_dev->msix_used_vectors = 0; if (vp_dev->msix_enabled) { /* Disable the vector used for configuration */ @@ -267,9 +266,16 @@ static void vp_free_vectors(struct virtio_device *vdev) /* Flush the write out to device */ ioread16(vp_dev->ioaddr + VIRTIO_MSI_CONFIG_VECTOR); - vp_dev->msix_enabled = 0; pci_disable_msix(vp_dev->pci_dev); + vp_dev->msix_enabled = 0; + vp_dev->msix_vectors = 0; } + + vp_dev->msix_used_vectors = 0; + kfree(vp_dev->msix_names); + vp_dev->msix_names = NULL; + kfree(vp_dev->msix_entries); + vp_dev->msix_entries = NULL; } static int vp_enable_msix(struct pci_dev *dev, struct msix_entry *entries, @@ -297,11 +303,11 @@ static int vp_request_vectors(struct virtio_device *vdev, unsigned max_vqs) vp_dev->msix_entries = kmalloc(nvectors * sizeof *vp_dev->msix_entries, GFP_KERNEL); if (!vp_dev->msix_entries) - goto error_entries; + goto error; vp_dev->msix_names = kmalloc(nvectors * sizeof *vp_dev->msix_names, GFP_KERNEL); if (!vp_dev->msix_names) - goto error_names; + goto error; for (i = 0; i < nvectors; ++i) vp_dev->msix_entries[i].entry = i; @@ -314,7 +320,7 @@ static int vp_request_vectors(struct virtio_device *vdev, unsigned max_vqs) err = request_irq(vp_dev->pci_dev->irq, vp_interrupt, IRQF_SHARED, name, vp_dev); if (err) - goto error_irq; + goto error; vp_dev->intx_enabled = 1; } else { vp_dev->msix_vectors = err; @@ -328,7 +334,7 @@ static int vp_request_vectors(struct virtio_device *vdev, unsigned max_vqs) vp_config_changed, 0, vp_dev->msix_names[v], vp_dev); if (err) - goto error_irq; + goto error; ++vp_dev->msix_used_vectors; iowrite16(v, vp_dev->ioaddr + VIRTIO_MSI_CONFIG_VECTOR); @@ -336,7 +342,7 @@ static int vp_request_vectors(struct virtio_device *vdev, unsigned max_vqs) v = ioread16(vp_dev->ioaddr + VIRTIO_MSI_CONFIG_VECTOR); if (v == VIRTIO_MSI_NO_VECTOR) { err = -EBUSY; - goto error_irq; + goto error; } } @@ -349,16 +355,12 @@ static int vp_request_vectors(struct virtio_device *vdev, unsigned max_vqs) vp_vring_interrupt, 0, vp_dev->msix_names[v], vp_dev); if (err) - goto error_irq; + goto error; ++vp_dev->msix_used_vectors; } return 0; -error_irq: +error: vp_free_vectors(vdev); - kfree(vp_dev->msix_names); -error_names: - kfree(vp_dev->msix_entries); -error_entries: return err; } -- cgit v1.2.3 From f6c82507030d61e15928d5cad946d3eac1c4a384 Mon Sep 17 00:00:00 2001 From: "Michael S. Tsirkin" Date: Sun, 26 Jul 2009 15:48:01 +0300 Subject: virtio: delete vq from list This makes delete vq the reverse of find vq. This is required to make it possible to retry find_vqs after a failure, otherwise the list gets corrupted. Signed-off-by: Michael S. Tsirkin Signed-off-by: Rusty Russell --- drivers/virtio/virtio_pci.c | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-) diff --git a/drivers/virtio/virtio_pci.c b/drivers/virtio/virtio_pci.c index ca40517ef9c..a1cb1a1c652 100644 --- a/drivers/virtio/virtio_pci.c +++ b/drivers/virtio/virtio_pci.c @@ -464,7 +464,11 @@ static void vp_del_vq(struct virtqueue *vq) { struct virtio_pci_device *vp_dev = to_vp_device(vq->vdev); struct virtio_pci_vq_info *info = vq->priv; - unsigned long size; + unsigned long flags, size; + + spin_lock_irqsave(&vp_dev->lock, flags); + list_del(&info->node); + spin_unlock_irqrestore(&vp_dev->lock, flags); iowrite16(info->queue_index, vp_dev->ioaddr + VIRTIO_PCI_QUEUE_SEL); -- cgit v1.2.3 From e969fed542cae08cb11d666efac4f7c5d624d09f Mon Sep 17 00:00:00 2001 From: "Michael S. Tsirkin" Date: Sun, 26 Jul 2009 15:48:08 +0300 Subject: virtio: refactor find_vqs This refactors find_vqs, making it more readable and robust, and fixing two regressions from 2.6.30: - double free_irq causing BUG_ON on device removal - probe failure when vq can't be assigned to msi-x vector (reported on old host kernels) Tested-by: Amit Shah Signed-off-by: Michael S. Tsirkin Signed-off-by: Rusty Russell --- drivers/virtio/virtio_pci.c | 212 +++++++++++++++++++++++++------------------- 1 file changed, 119 insertions(+), 93 deletions(-) diff --git a/drivers/virtio/virtio_pci.c b/drivers/virtio/virtio_pci.c index a1cb1a1c652..248e00ec4dc 100644 --- a/drivers/virtio/virtio_pci.c +++ b/drivers/virtio/virtio_pci.c @@ -52,8 +52,10 @@ struct virtio_pci_device char (*msix_names)[256]; /* Number of available vectors */ unsigned msix_vectors; - /* Vectors allocated */ + /* Vectors allocated, excluding per-vq vectors if any */ unsigned msix_used_vectors; + /* Whether we have vector per vq */ + bool per_vq_vectors; }; /* Constants for MSI-X */ @@ -278,27 +280,24 @@ static void vp_free_vectors(struct virtio_device *vdev) vp_dev->msix_entries = NULL; } -static int vp_enable_msix(struct pci_dev *dev, struct msix_entry *entries, - int *options, int noptions) -{ - int i; - for (i = 0; i < noptions; ++i) - if (!pci_enable_msix(dev, entries, options[i])) - return options[i]; - return -EBUSY; -} - -static int vp_request_vectors(struct virtio_device *vdev, unsigned max_vqs) +static int vp_request_vectors(struct virtio_device *vdev, int nvectors, + bool per_vq_vectors) { struct virtio_pci_device *vp_dev = to_vp_device(vdev); const char *name = dev_name(&vp_dev->vdev.dev); unsigned i, v; int err = -ENOMEM; - /* We want at most one vector per queue and one for config changes. - * Fallback to separate vectors for config and a shared for queues. - * Finally fall back to regular interrupts. */ - int options[] = { max_vqs + 1, 2 }; - int nvectors = max(options[0], options[1]); + + if (!nvectors) { + /* Can't allocate MSI-X vectors, use regular interrupt */ + vp_dev->msix_vectors = 0; + err = request_irq(vp_dev->pci_dev->irq, vp_interrupt, + IRQF_SHARED, name, vp_dev); + if (err) + return err; + vp_dev->intx_enabled = 1; + return 0; + } vp_dev->msix_entries = kmalloc(nvectors * sizeof *vp_dev->msix_entries, GFP_KERNEL); @@ -312,41 +311,34 @@ static int vp_request_vectors(struct virtio_device *vdev, unsigned max_vqs) for (i = 0; i < nvectors; ++i) vp_dev->msix_entries[i].entry = i; - err = vp_enable_msix(vp_dev->pci_dev, vp_dev->msix_entries, - options, ARRAY_SIZE(options)); - if (err < 0) { - /* Can't allocate enough MSI-X vectors, use regular interrupt */ - vp_dev->msix_vectors = 0; - err = request_irq(vp_dev->pci_dev->irq, vp_interrupt, - IRQF_SHARED, name, vp_dev); - if (err) - goto error; - vp_dev->intx_enabled = 1; - } else { - vp_dev->msix_vectors = err; - vp_dev->msix_enabled = 1; - - /* Set the vector used for configuration */ - v = vp_dev->msix_used_vectors; - snprintf(vp_dev->msix_names[v], sizeof *vp_dev->msix_names, - "%s-config", name); - err = request_irq(vp_dev->msix_entries[v].vector, - vp_config_changed, 0, vp_dev->msix_names[v], - vp_dev); - if (err) - goto error; - ++vp_dev->msix_used_vectors; + err = pci_enable_msix(vp_dev->pci_dev, vp_dev->msix_entries, nvectors); + if (err > 0) + err = -ENOSPC; + if (err) + goto error; + vp_dev->msix_vectors = nvectors; + vp_dev->msix_enabled = 1; + + /* Set the vector used for configuration */ + v = vp_dev->msix_used_vectors; + snprintf(vp_dev->msix_names[v], sizeof *vp_dev->msix_names, + "%s-config", name); + err = request_irq(vp_dev->msix_entries[v].vector, + vp_config_changed, 0, vp_dev->msix_names[v], + vp_dev); + if (err) + goto error; + ++vp_dev->msix_used_vectors; - iowrite16(v, vp_dev->ioaddr + VIRTIO_MSI_CONFIG_VECTOR); - /* Verify we had enough resources to assign the vector */ - v = ioread16(vp_dev->ioaddr + VIRTIO_MSI_CONFIG_VECTOR); - if (v == VIRTIO_MSI_NO_VECTOR) { - err = -EBUSY; - goto error; - } + iowrite16(v, vp_dev->ioaddr + VIRTIO_MSI_CONFIG_VECTOR); + /* Verify we had enough resources to assign the vector */ + v = ioread16(vp_dev->ioaddr + VIRTIO_MSI_CONFIG_VECTOR); + if (v == VIRTIO_MSI_NO_VECTOR) { + err = -EBUSY; + goto error; } - if (vp_dev->msix_vectors && vp_dev->msix_vectors != max_vqs + 1) { + if (!per_vq_vectors) { /* Shared vector for all VQs */ v = vp_dev->msix_used_vectors; snprintf(vp_dev->msix_names[v], sizeof *vp_dev->msix_names, @@ -366,13 +358,14 @@ error: static struct virtqueue *vp_find_vq(struct virtio_device *vdev, unsigned index, void (*callback)(struct virtqueue *vq), - const char *name) + const char *name, + u16 vector) { struct virtio_pci_device *vp_dev = to_vp_device(vdev); struct virtio_pci_vq_info *info; struct virtqueue *vq; unsigned long flags, size; - u16 num, vector; + u16 num; int err; /* Select the queue we're interested in */ @@ -391,7 +384,7 @@ static struct virtqueue *vp_find_vq(struct virtio_device *vdev, unsigned index, info->queue_index = index; info->num = num; - info->vector = VIRTIO_MSI_NO_VECTOR; + info->vector = vector; size = PAGE_ALIGN(vring_size(num, VIRTIO_PCI_VRING_ALIGN)); info->queue = alloc_pages_exact(size, GFP_KERNEL|__GFP_ZERO); @@ -415,22 +408,7 @@ static struct virtqueue *vp_find_vq(struct virtio_device *vdev, unsigned index, vq->priv = info; info->vq = vq; - /* allocate per-vq vector if available and necessary */ - if (callback && vp_dev->msix_used_vectors < vp_dev->msix_vectors) { - vector = vp_dev->msix_used_vectors; - snprintf(vp_dev->msix_names[vector], sizeof *vp_dev->msix_names, - "%s-%s", dev_name(&vp_dev->vdev.dev), name); - err = request_irq(vp_dev->msix_entries[vector].vector, - vring_interrupt, 0, - vp_dev->msix_names[vector], vq); - if (err) - goto out_request_irq; - info->vector = vector; - ++vp_dev->msix_used_vectors; - } else - vector = VP_MSIX_VQ_VECTOR; - - if (callback && vp_dev->msix_enabled) { + if (vector != VIRTIO_MSI_NO_VECTOR) { iowrite16(vector, vp_dev->ioaddr + VIRTIO_MSI_QUEUE_VECTOR); vector = ioread16(vp_dev->ioaddr + VIRTIO_MSI_QUEUE_VECTOR); if (vector == VIRTIO_MSI_NO_VECTOR) { @@ -446,11 +424,6 @@ static struct virtqueue *vp_find_vq(struct virtio_device *vdev, unsigned index, return vq; out_assign: - if (info->vector != VIRTIO_MSI_NO_VECTOR) { - free_irq(vp_dev->msix_entries[info->vector].vector, vq); - --vp_dev->msix_used_vectors; - } -out_request_irq: vring_del_virtqueue(vq); out_activate_queue: iowrite32(0, vp_dev->ioaddr + VIRTIO_PCI_QUEUE_PFN); @@ -472,9 +445,6 @@ static void vp_del_vq(struct virtqueue *vq) iowrite16(info->queue_index, vp_dev->ioaddr + VIRTIO_PCI_QUEUE_SEL); - if (info->vector != VIRTIO_MSI_NO_VECTOR) - free_irq(vp_dev->msix_entries[info->vector].vector, vq); - if (vp_dev->msix_enabled) { iowrite16(VIRTIO_MSI_NO_VECTOR, vp_dev->ioaddr + VIRTIO_MSI_QUEUE_VECTOR); @@ -495,36 +465,62 @@ static void vp_del_vq(struct virtqueue *vq) /* the config->del_vqs() implementation */ static void vp_del_vqs(struct virtio_device *vdev) { + struct virtio_pci_device *vp_dev = to_vp_device(vdev); struct virtqueue *vq, *n; + struct virtio_pci_vq_info *info; - list_for_each_entry_safe(vq, n, &vdev->vqs, list) + list_for_each_entry_safe(vq, n, &vdev->vqs, list) { + info = vq->priv; + if (vp_dev->per_vq_vectors) + free_irq(vp_dev->msix_entries[info->vector].vector, vq); vp_del_vq(vq); + } + vp_dev->per_vq_vectors = false; vp_free_vectors(vdev); } -/* the config->find_vqs() implementation */ -static int vp_find_vqs(struct virtio_device *vdev, unsigned nvqs, - struct virtqueue *vqs[], - vq_callback_t *callbacks[], - const char *names[]) +static int vp_try_to_find_vqs(struct virtio_device *vdev, unsigned nvqs, + struct virtqueue *vqs[], + vq_callback_t *callbacks[], + const char *names[], + int nvectors, + bool per_vq_vectors) { - int vectors = 0; - int i, err; - - /* How many vectors would we like? */ - for (i = 0; i < nvqs; ++i) - if (callbacks[i]) - ++vectors; + struct virtio_pci_device *vp_dev = to_vp_device(vdev); + u16 vector; + int i, err, allocated_vectors; - err = vp_request_vectors(vdev, vectors); + err = vp_request_vectors(vdev, nvectors, per_vq_vectors); if (err) goto error_request; + vp_dev->per_vq_vectors = per_vq_vectors; + allocated_vectors = vp_dev->msix_used_vectors; for (i = 0; i < nvqs; ++i) { - vqs[i] = vp_find_vq(vdev, i, callbacks[i], names[i]); - if (IS_ERR(vqs[i])) + if (!callbacks[i] || !vp_dev->msix_enabled) + vector = VIRTIO_MSI_NO_VECTOR; + else if (vp_dev->per_vq_vectors) + vector = allocated_vectors++; + else + vector = VP_MSIX_VQ_VECTOR; + vqs[i] = vp_find_vq(vdev, i, callbacks[i], names[i], vector); + if (IS_ERR(vqs[i])) { + err = PTR_ERR(vqs[i]); goto error_find; + } + /* allocate per-vq irq if available and necessary */ + if (vp_dev->per_vq_vectors && vector != VIRTIO_MSI_NO_VECTOR) { + snprintf(vp_dev->msix_names[vector], sizeof *vp_dev->msix_names, + "%s-%s", dev_name(&vp_dev->vdev.dev), names[i]); + err = request_irq(vp_dev->msix_entries[vector].vector, + vring_interrupt, 0, + vp_dev->msix_names[vector], vqs[i]); + if (err) { + vp_del_vq(vqs[i]); + goto error_find; + } + } } return 0; @@ -532,7 +528,37 @@ error_find: vp_del_vqs(vdev); error_request: - return PTR_ERR(vqs[i]); + return err; +} + +/* the config->find_vqs() implementation */ +static int vp_find_vqs(struct virtio_device *vdev, unsigned nvqs, + struct virtqueue *vqs[], + vq_callback_t *callbacks[], + const char *names[]) +{ + int vectors = 0; + int i, uninitialized_var(err); + + /* How many vectors would we like? */ + for (i = 0; i < nvqs; ++i) + if (callbacks[i]) + ++vectors; + + /* We want at most one vector per queue and one for config changes. */ + err = vp_try_to_find_vqs(vdev, nvqs, vqs, callbacks, names, + vectors + 1, true); + if (!err) + return 0; + /* Fallback to separate vectors for config and a shared for queues. */ + err = vp_try_to_find_vqs(vdev, nvqs, vqs, callbacks, names, + 2, false); + if (!err) + return 0; + /* Finally fall back to regular interrupts. */ + err = vp_try_to_find_vqs(vdev, nvqs, vqs, callbacks, names, + 0, false); + return err; } static struct virtio_config_ops virtio_pci_config_ops = { -- cgit v1.2.3 From 2e04ef76916d1e29a077ea9d0f2003c8fd86724d Mon Sep 17 00:00:00 2001 From: Rusty Russell Date: Thu, 30 Jul 2009 16:03:45 -0600 Subject: lguest: fix comment style I don't really notice it (except to begrudge the extra vertical space), but Ingo does. And he pointed out that one excuse of lguest is as a teaching tool, it should set a good example. Signed-off-by: Rusty Russell Cc: Ingo Molnar --- Documentation/lguest/lguest.c | 540 ++++++++++++++++++++++------------ arch/x86/include/asm/lguest.h | 3 +- arch/x86/include/asm/lguest_hcall.h | 10 +- arch/x86/lguest/boot.c | 428 +++++++++++++++++---------- arch/x86/lguest/i386_head.S | 110 ++++--- drivers/lguest/core.c | 114 ++++--- drivers/lguest/hypercalls.c | 141 ++++++--- drivers/lguest/interrupts_and_traps.c | 288 ++++++++++++------ drivers/lguest/lg.h | 23 +- drivers/lguest/lguest_device.c | 150 ++++++---- drivers/lguest/lguest_user.c | 137 ++++++--- drivers/lguest/page_tables.c | 427 ++++++++++++++++++--------- drivers/lguest/segments.c | 106 ++++--- drivers/lguest/x86/core.c | 372 +++++++++++++++-------- drivers/lguest/x86/switcher_32.S | 18 +- include/linux/lguest.h | 36 ++- include/linux/lguest_launcher.h | 18 +- 17 files changed, 1906 insertions(+), 1015 deletions(-) diff --git a/Documentation/lguest/lguest.c b/Documentation/lguest/lguest.c index 45d7d6dcae7..aa66a52b73e 100644 --- a/Documentation/lguest/lguest.c +++ b/Documentation/lguest/lguest.c @@ -1,7 +1,9 @@ -/*P:100 This is the Launcher code, a simple program which lays out the - * "physical" memory for the new Guest by mapping the kernel image and - * the virtual devices, then opens /dev/lguest to tell the kernel - * about the Guest and control it. :*/ +/*P:100 + * This is the Launcher code, a simple program which lays out the "physical" + * memory for the new Guest by mapping the kernel image and the virtual + * devices, then opens /dev/lguest to tell the kernel about the Guest and + * control it. +:*/ #define _LARGEFILE64_SOURCE #define _GNU_SOURCE #include @@ -46,13 +48,15 @@ #include "linux/virtio_rng.h" #include "linux/virtio_ring.h" #include "asm/bootparam.h" -/*L:110 We can ignore the 39 include files we need for this program, but I do - * want to draw attention to the use of kernel-style types. +/*L:110 + * We can ignore the 39 include files we need for this program, but I do want + * to draw attention to the use of kernel-style types. * * As Linus said, "C is a Spartan language, and so should your naming be." I * like these abbreviations, so we define them here. Note that u64 is always * unsigned long long, which works on all Linux systems: this means that we can - * use %llu in printf for any u64. */ + * use %llu in printf for any u64. + */ typedef unsigned long long u64; typedef uint32_t u32; typedef uint16_t u16; @@ -69,8 +73,10 @@ typedef uint8_t u8; /* This will occupy 3 pages: it must be a power of 2. */ #define VIRTQUEUE_NUM 256 -/*L:120 verbose is both a global flag and a macro. The C preprocessor allows - * this, and although I wouldn't recommend it, it works quite nicely here. */ +/*L:120 + * verbose is both a global flag and a macro. The C preprocessor allows + * this, and although I wouldn't recommend it, it works quite nicely here. + */ static bool verbose; #define verbose(args...) \ do { if (verbose) printf(args); } while(0) @@ -100,8 +106,7 @@ struct device_list /* A single linked list of devices. */ struct device *dev; - /* And a pointer to the last device for easy append and also for - * configuration appending. */ + /* And a pointer to the last device for easy append. */ struct device *lastdev; }; @@ -168,20 +173,24 @@ static char **main_args; /* The original tty settings to restore on exit. */ static struct termios orig_term; -/* We have to be careful with barriers: our devices are all run in separate +/* + * We have to be careful with barriers: our devices are all run in separate * threads and so we need to make sure that changes visible to the Guest happen - * in precise order. */ + * in precise order. + */ #define wmb() __asm__ __volatile__("" : : : "memory") #define mb() __asm__ __volatile__("" : : : "memory") -/* Convert an iovec element to the given type. +/* + * Convert an iovec element to the given type. * * This is a fairly ugly trick: we need to know the size of the type and * alignment requirement to check the pointer is kosher. It's also nice to * have the name of the type in case we report failure. * * Typing those three things all the time is cumbersome and error prone, so we - * have a macro which sets them all up and passes to the real function. */ + * have a macro which sets them all up and passes to the real function. + */ #define convert(iov, type) \ ((type *)_convert((iov), sizeof(type), __alignof__(type), #type)) @@ -198,8 +207,10 @@ static void *_convert(struct iovec *iov, size_t size, size_t align, /* Wrapper for the last available index. Makes it easier to change. */ #define lg_last_avail(vq) ((vq)->last_avail_idx) -/* The virtio configuration space is defined to be little-endian. x86 is - * little-endian too, but it's nice to be explicit so we have these helpers. */ +/* + * The virtio configuration space is defined to be little-endian. x86 is + * little-endian too, but it's nice to be explicit so we have these helpers. + */ #define cpu_to_le16(v16) (v16) #define cpu_to_le32(v32) (v32) #define cpu_to_le64(v64) (v64) @@ -241,11 +252,12 @@ static u8 *get_feature_bits(struct device *dev) + dev->num_vq * sizeof(struct lguest_vqconfig); } -/*L:100 The Launcher code itself takes us out into userspace, that scary place - * where pointers run wild and free! Unfortunately, like most userspace - * programs, it's quite boring (which is why everyone likes to hack on the - * kernel!). Perhaps if you make up an Lguest Drinking Game at this point, it - * will get you through this section. Or, maybe not. +/*L:100 + * The Launcher code itself takes us out into userspace, that scary place where + * pointers run wild and free! Unfortunately, like most userspace programs, + * it's quite boring (which is why everyone likes to hack on the kernel!). + * Perhaps if you make up an Lguest Drinking Game at this point, it will get + * you through this section. Or, maybe not. * * The Launcher sets up a big chunk of memory to be the Guest's "physical" * memory and stores it in "guest_base". In other words, Guest physical == @@ -253,7 +265,8 @@ static u8 *get_feature_bits(struct device *dev) * * This can be tough to get your head around, but usually it just means that we * use these trivial conversion functions when the Guest gives us it's - * "physical" addresses: */ + * "physical" addresses: + */ static void *from_guest_phys(unsigned long addr) { return guest_base + addr; @@ -268,7 +281,8 @@ static unsigned long to_guest_phys(const void *addr) * Loading the Kernel. * * We start with couple of simple helper routines. open_or_die() avoids - * error-checking code cluttering the callers: */ + * error-checking code cluttering the callers: + */ static int open_or_die(const char *name, int flags) { int fd = open(name, flags); @@ -283,8 +297,10 @@ static void *map_zeroed_pages(unsigned int num) int fd = open_or_die("/dev/zero", O_RDONLY); void *addr; - /* We use a private mapping (ie. if we write to the page, it will be - * copied). */ + /* + * We use a private mapping (ie. if we write to the page, it will be + * copied). + */ addr = mmap(NULL, getpagesize() * num, PROT_READ|PROT_WRITE|PROT_EXEC, MAP_PRIVATE, fd, 0); if (addr == MAP_FAILED) @@ -305,20 +321,24 @@ static void *get_pages(unsigned int num) return addr; } -/* This routine is used to load the kernel or initrd. It tries mmap, but if +/* + * This routine is used to load the kernel or initrd. It tries mmap, but if * that fails (Plan 9's kernel file isn't nicely aligned on page boundaries), - * it falls back to reading the memory in. */ + * it falls back to reading the memory in. + */ static void map_at(int fd, void *addr, unsigned long offset, unsigned long len) { ssize_t r; - /* We map writable even though for some segments are marked read-only. + /* + * We map writable even though for some segments are marked read-only. * The kernel really wants to be writable: it patches its own * instructions. * * MAP_PRIVATE means that the page won't be copied until a write is * done to it. This allows us to share untouched memory between - * Guests. */ + * Guests. + */ if (mmap(addr, len, PROT_READ|PROT_WRITE|PROT_EXEC, MAP_FIXED|MAP_PRIVATE, fd, offset) != MAP_FAILED) return; @@ -329,7 +349,8 @@ static void map_at(int fd, void *addr, unsigned long offset, unsigned long len) err(1, "Reading offset %lu len %lu gave %zi", offset, len, r); } -/* This routine takes an open vmlinux image, which is in ELF, and maps it into +/* + * This routine takes an open vmlinux image, which is in ELF, and maps it into * the Guest memory. ELF = Embedded Linking Format, which is the format used * by all modern binaries on Linux including the kernel. * @@ -337,23 +358,28 @@ static void map_at(int fd, void *addr, unsigned long offset, unsigned long len) * address. We use the physical address; the Guest will map itself to the * virtual address. * - * We return the starting address. */ + * We return the starting address. + */ static unsigned long map_elf(int elf_fd, const Elf32_Ehdr *ehdr) { Elf32_Phdr phdr[ehdr->e_phnum]; unsigned int i; - /* Sanity checks on the main ELF header: an x86 executable with a - * reasonable number of correctly-sized program headers. */ + /* + * Sanity checks on the main ELF header: an x86 executable with a + * reasonable number of correctly-sized program headers. + */ if (ehdr->e_type != ET_EXEC || ehdr->e_machine != EM_386 || ehdr->e_phentsize != sizeof(Elf32_Phdr) || ehdr->e_phnum < 1 || ehdr->e_phnum > 65536U/sizeof(Elf32_Phdr)) errx(1, "Malformed elf header"); - /* An ELF executable contains an ELF header and a number of "program" + /* + * An ELF executable contains an ELF header and a number of "program" * headers which indicate which parts ("segments") of the program to - * load where. */ + * load where. + */ /* We read in all the program headers at once: */ if (lseek(elf_fd, ehdr->e_phoff, SEEK_SET) < 0) @@ -361,8 +387,10 @@ static unsigned long map_elf(int elf_fd, const Elf32_Ehdr *ehdr) if (read(elf_fd, phdr, sizeof(phdr)) != sizeof(phdr)) err(1, "Reading program headers"); - /* Try all the headers: there are usually only three. A read-only one, - * a read-write one, and a "note" section which we don't load. */ + /* + * Try all the headers: there are usually only three. A read-only one, + * a read-write one, and a "note" section which we don't load. + */ for (i = 0; i < ehdr->e_phnum; i++) { /* If this isn't a loadable segment, we ignore it */ if (phdr[i].p_type != PT_LOAD) @@ -380,13 +408,15 @@ static unsigned long map_elf(int elf_fd, const Elf32_Ehdr *ehdr) return ehdr->e_entry; } -/*L:150 A bzImage, unlike an ELF file, is not meant to be loaded. You're - * supposed to jump into it and it will unpack itself. We used to have to - * perform some hairy magic because the unpacking code scared me. +/*L:150 + * A bzImage, unlike an ELF file, is not meant to be loaded. You're supposed + * to jump into it and it will unpack itself. We used to have to perform some + * hairy magic because the unpacking code scared me. * * Fortunately, Jeremy Fitzhardinge convinced me it wasn't that hard and wrote * a small patch to jump over the tricky bits in the Guest, so now we just read - * the funky header so we know where in the file to load, and away we go! */ + * the funky header so we know where in the file to load, and away we go! + */ static unsigned long load_bzimage(int fd) { struct boot_params boot; @@ -394,8 +424,10 @@ static unsigned long load_bzimage(int fd) /* Modern bzImages get loaded at 1M. */ void *p = from_guest_phys(0x100000); - /* Go back to the start of the file and read the header. It should be - * a Linux boot header (see Documentation/x86/i386/boot.txt) */ + /* + * Go back to the start of the file and read the header. It should be + * a Linux boot header (see Documentation/x86/i386/boot.txt) + */ lseek(fd, 0, SEEK_SET); read(fd, &boot, sizeof(boot)); @@ -414,9 +446,11 @@ static unsigned long load_bzimage(int fd) return boot.hdr.code32_start; } -/*L:140 Loading the kernel is easy when it's a "vmlinux", but most kernels +/*L:140 + * Loading the kernel is easy when it's a "vmlinux", but most kernels * come wrapped up in the self-decompressing "bzImage" format. With a little - * work, we can load those, too. */ + * work, we can load those, too. + */ static unsigned long load_kernel(int fd) { Elf32_Ehdr hdr; @@ -433,24 +467,28 @@ static unsigned long load_kernel(int fd) return load_bzimage(fd); } -/* This is a trivial little helper to align pages. Andi Kleen hated it because +/* + * This is a trivial little helper to align pages. Andi Kleen hated it because * it calls getpagesize() twice: "it's dumb code." * * Kernel guys get really het up about optimization, even when it's not - * necessary. I leave this code as a reaction against that. */ + * necessary. I leave this code as a reaction against that. + */ static inline unsigned long page_align(unsigned long addr) { /* Add upwards and truncate downwards. */ return ((addr + getpagesize()-1) & ~(getpagesize()-1)); } -/*L:180 An "initial ram disk" is a disk image loaded into memory along with - * the kernel which the kernel can use to boot from without needing any - * drivers. Most distributions now use this as standard: the initrd contains - * the code to load the appropriate driver modules for the current machine. +/*L:180 + * An "initial ram disk" is a disk image loaded into memory along with the + * kernel which the kernel can use to boot from without needing any drivers. + * Most distributions now use this as standard: the initrd contains the code to + * load the appropriate driver modules for the current machine. * * Importantly, James Morris works for RedHat, and Fedora uses initrds for its - * kernels. He sent me this (and tells me when I break it). */ + * kernels. He sent me this (and tells me when I break it). + */ static unsigned long load_initrd(const char *name, unsigned long mem) { int ifd; @@ -462,12 +500,16 @@ static unsigned long load_initrd(const char *name, unsigned long mem) if (fstat(ifd, &st) < 0) err(1, "fstat() on initrd '%s'", name); - /* We map the initrd at the top of memory, but mmap wants it to be - * page-aligned, so we round the size up for that. */ + /* + * We map the initrd at the top of memory, but mmap wants it to be + * page-aligned, so we round the size up for that. + */ len = page_align(st.st_size); map_at(ifd, from_guest_phys(mem - len), 0, st.st_size); - /* Once a file is mapped, you can close the file descriptor. It's a - * little odd, but quite useful. */ + /* + * Once a file is mapped, you can close the file descriptor. It's a + * little odd, but quite useful. + */ close(ifd); verbose("mapped initrd %s size=%lu @ %p\n", name, len, (void*)mem-len); @@ -476,8 +518,10 @@ static unsigned long load_initrd(const char *name, unsigned long mem) } /*:*/ -/* Simple routine to roll all the commandline arguments together with spaces - * between them. */ +/* + * Simple routine to roll all the commandline arguments together with spaces + * between them. + */ static void concat(char *dst, char *args[]) { unsigned int i, len = 0; @@ -494,10 +538,12 @@ static void concat(char *dst, char *args[]) dst[len] = '\0'; } -/*L:185 This is where we actually tell the kernel to initialize the Guest. We +/*L:185 + * This is where we actually tell the kernel to initialize the Guest. We * saw the arguments it expects when we looked at initialize() in lguest_user.c: * the base of Guest "physical" memory, the top physical page to allow and the - * entry point for the Guest. */ + * entry point for the Guest. + */ static void tell_kernel(unsigned long start) { unsigned long args[] = { LHREQ_INITIALIZE, @@ -522,20 +568,26 @@ static void tell_kernel(unsigned long start) static void *_check_pointer(unsigned long addr, unsigned int size, unsigned int line) { - /* We have to separately check addr and addr+size, because size could - * be huge and addr + size might wrap around. */ + /* + * We have to separately check addr and addr+size, because size could + * be huge and addr + size might wrap around. + */ if (addr >= guest_limit || addr + size >= guest_limit) errx(1, "%s:%i: Invalid address %#lx", __FILE__, line, addr); - /* We return a pointer for the caller's convenience, now we know it's - * safe to use. */ + /* + * We return a pointer for the caller's convenience, now we know it's + * safe to use. + */ return from_guest_phys(addr); } /* A macro which transparently hands the line number to the real function. */ #define check_pointer(addr,size) _check_pointer(addr, size, __LINE__) -/* Each buffer in the virtqueues is actually a chain of descriptors. This +/* + * Each buffer in the virtqueues is actually a chain of descriptors. This * function returns the next descriptor in the chain, or vq->vring.num if we're - * at the end. */ + * at the end. + */ static unsigned next_desc(struct vring_desc *desc, unsigned int i, unsigned int max) { @@ -576,12 +628,14 @@ static void trigger_irq(struct virtqueue *vq) err(1, "Triggering irq %i", vq->config.irq); } -/* This looks in the virtqueue and for the first available buffer, and converts +/* + * This looks in the virtqueue and for the first available buffer, and converts * it to an iovec for convenient access. Since descriptors consist of some * number of output then some number of input descriptors, it's actually two * iovecs, but we pack them into one and note how many of each there were. * - * This function returns the descriptor number found. */ + * This function returns the descriptor number found. + */ static unsigned wait_for_vq_desc(struct virtqueue *vq, struct iovec iov[], unsigned int *out_num, unsigned int *in_num) @@ -599,8 +653,10 @@ static unsigned wait_for_vq_desc(struct virtqueue *vq, /* OK, now we need to know about added descriptors. */ vq->vring.used->flags &= ~VRING_USED_F_NO_NOTIFY; - /* They could have slipped one in as we were doing that: make - * sure it's written, then check again. */ + /* + * They could have slipped one in as we were doing that: make + * sure it's written, then check again. + */ mb(); if (last_avail != vq->vring.avail->idx) { vq->vring.used->flags |= VRING_USED_F_NO_NOTIFY; @@ -620,8 +676,10 @@ static unsigned wait_for_vq_desc(struct virtqueue *vq, errx(1, "Guest moved used index from %u to %u", last_avail, vq->vring.avail->idx); - /* Grab the next descriptor number they're advertising, and increment - * the index we've seen. */ + /* + * Grab the next descriptor number they're advertising, and increment + * the index we've seen. + */ head = vq->vring.avail->ring[last_avail % vq->vring.num]; lg_last_avail(vq)++; @@ -636,8 +694,10 @@ static unsigned wait_for_vq_desc(struct virtqueue *vq, desc = vq->vring.desc; i = head; - /* If this is an indirect entry, then this buffer contains a descriptor - * table which we handle as if it's any normal descriptor chain. */ + /* + * If this is an indirect entry, then this buffer contains a descriptor + * table which we handle as if it's any normal descriptor chain. + */ if (desc[i].flags & VRING_DESC_F_INDIRECT) { if (desc[i].len % sizeof(struct vring_desc)) errx(1, "Invalid size for indirect buffer table"); @@ -656,8 +716,10 @@ static unsigned wait_for_vq_desc(struct virtqueue *vq, if (desc[i].flags & VRING_DESC_F_WRITE) (*in_num)++; else { - /* If it's an output descriptor, they're all supposed - * to come before any input descriptors. */ + /* + * If it's an output descriptor, they're all supposed + * to come before any input descriptors. + */ if (*in_num) errx(1, "Descriptor has out after in"); (*out_num)++; @@ -671,14 +733,18 @@ static unsigned wait_for_vq_desc(struct virtqueue *vq, return head; } -/* After we've used one of their buffers, we tell them about it. We'll then - * want to send them an interrupt, using trigger_irq(). */ +/* + * After we've used one of their buffers, we tell them about it. We'll then + * want to send them an interrupt, using trigger_irq(). + */ static void add_used(struct virtqueue *vq, unsigned int head, int len) { struct vring_used_elem *used; - /* The virtqueue contains a ring of used buffers. Get a pointer to the - * next entry in that used ring. */ + /* + * The virtqueue contains a ring of used buffers. Get a pointer to the + * next entry in that used ring. + */ used = &vq->vring.used->ring[vq->vring.used->idx % vq->vring.num]; used->id = head; used->len = len; @@ -698,7 +764,8 @@ static void add_used_and_trigger(struct virtqueue *vq, unsigned head, int len) /* * The Console * - * We associate some data with the console for our exit hack. */ + * We associate some data with the console for our exit hack. + */ struct console_abort { /* How many times have they hit ^C? */ @@ -725,20 +792,24 @@ static void console_input(struct virtqueue *vq) if (len <= 0) { /* Ran out of input? */ warnx("Failed to get console input, ignoring console."); - /* For simplicity, dying threads kill the whole Launcher. So - * just nap here. */ + /* + * For simplicity, dying threads kill the whole Launcher. So + * just nap here. + */ for (;;) pause(); } add_used_and_trigger(vq, head, len); - /* Three ^C within one second? Exit. + /* + * Three ^C within one second? Exit. * * This is such a hack, but works surprisingly well. Each ^C has to * be in a buffer by itself, so they can't be too fast. But we check * that we get three within about a second, so they can't be too - * slow. */ + * slow. + */ if (len != 1 || ((char *)iov[0].iov_base)[0] != 3) { abort->count = 0; return; @@ -809,8 +880,7 @@ static bool will_block(int fd) return select(fd+1, &fdset, NULL, NULL, &zero) != 1; } -/* This is where we handle packets coming in from the tun device to our - * Guest. */ +/* This handles packets coming in from the tun device to our Guest. */ static void net_input(struct virtqueue *vq) { int len; @@ -842,8 +912,10 @@ static int do_thread(void *_vq) return 0; } -/* When a child dies, we kill our entire process group with SIGTERM. This - * also has the side effect that the shell restores the console for us! */ +/* + * When a child dies, we kill our entire process group with SIGTERM. This + * also has the side effect that the shell restores the console for us! + */ static void kill_launcher(int signal) { kill(0, SIGTERM); @@ -880,9 +952,10 @@ static void reset_device(struct device *dev) static void create_thread(struct virtqueue *vq) { - /* Create stack for thread and run it. Since stack grows - * upwards, we point the stack pointer to the end of this - * region. */ + /* + * Create stack for thread and run it. Since the stack grows upwards, + * we point the stack pointer to the end of this region. + */ char *stack = malloc(32768); unsigned long args[] = { LHREQ_EVENTFD, vq->config.pfn*getpagesize(), 0 }; @@ -981,8 +1054,11 @@ static void handle_output(unsigned long addr) } } - /* Early console write is done using notify on a nul-terminated string - * in Guest memory. */ + /* + * Early console write is done using notify on a nul-terminated string + * in Guest memory. It's also great for hacking debugging messages + * into a Guest. + */ if (addr >= guest_limit) errx(1, "Bad NOTIFY %#lx", addr); @@ -998,10 +1074,12 @@ static void handle_output(unsigned long addr) * routines to allocate and manage them. */ -/* The layout of the device page is a "struct lguest_device_desc" followed by a +/* + * The layout of the device page is a "struct lguest_device_desc" followed by a * number of virtqueue descriptors, then two sets of feature bits, then an * array of configuration bytes. This routine returns the configuration - * pointer. */ + * pointer. + */ static u8 *device_config(const struct device *dev) { return (void *)(dev->desc + 1) @@ -1009,9 +1087,11 @@ static u8 *device_config(const struct device *dev) + dev->feature_len * 2; } -/* This routine allocates a new "struct lguest_device_desc" from descriptor +/* + * This routine allocates a new "struct lguest_device_desc" from descriptor * table page just above the Guest's normal memory. It returns a pointer to - * that descriptor. */ + * that descriptor. + */ static struct lguest_device_desc *new_dev_desc(u16 type) { struct lguest_device_desc d = { .type = type }; @@ -1032,8 +1112,10 @@ static struct lguest_device_desc *new_dev_desc(u16 type) return memcpy(p, &d, sizeof(d)); } -/* Each device descriptor is followed by the description of its virtqueues. We - * specify how many descriptors the virtqueue is to have. */ +/* + * Each device descriptor is followed by the description of its virtqueues. We + * specify how many descriptors the virtqueue is to have. + */ static void add_virtqueue(struct device *dev, unsigned int num_descs, void (*service)(struct virtqueue *)) { @@ -1061,10 +1143,12 @@ static void add_virtqueue(struct device *dev, unsigned int num_descs, /* Initialize the vring. */ vring_init(&vq->vring, num_descs, p, LGUEST_VRING_ALIGN); - /* Append virtqueue to this device's descriptor. We use + /* + * Append virtqueue to this device's descriptor. We use * device_config() to get the end of the device's current virtqueues; * we check that we haven't added any config or feature information - * yet, otherwise we'd be overwriting them. */ + * yet, otherwise we'd be overwriting them. + */ assert(dev->desc->config_len == 0 && dev->desc->feature_len == 0); memcpy(device_config(dev), &vq->config, sizeof(vq->config)); dev->num_vq++; @@ -1072,14 +1156,18 @@ static void add_virtqueue(struct device *dev, unsigned int num_descs, verbose("Virtqueue page %#lx\n", to_guest_phys(p)); - /* Add to tail of list, so dev->vq is first vq, dev->vq->next is - * second. */ + /* + * Add to tail of list, so dev->vq is first vq, dev->vq->next is + * second. + */ for (i = &dev->vq; *i; i = &(*i)->next); *i = vq; } -/* The first half of the feature bitmask is for us to advertise features. The - * second half is for the Guest to accept features. */ +/* + * The first half of the feature bitmask is for us to advertise features. The + * second half is for the Guest to accept features. + */ static void add_feature(struct device *dev, unsigned bit) { u8 *features = get_feature_bits(dev); @@ -1093,9 +1181,11 @@ static void add_feature(struct device *dev, unsigned bit) features[bit / CHAR_BIT] |= (1 << (bit % CHAR_BIT)); } -/* This routine sets the configuration fields for an existing device's +/* + * This routine sets the configuration fields for an existing device's * descriptor. It only works for the last device, but that's OK because that's - * how we use it. */ + * how we use it. + */ static void set_config(struct device *dev, unsigned len, const void *conf) { /* Check we haven't overflowed our single page. */ @@ -1110,10 +1200,12 @@ static void set_config(struct device *dev, unsigned len, const void *conf) assert(dev->desc->config_len == len); } -/* This routine does all the creation and setup of a new device, including +/* + * This routine does all the creation and setup of a new device, including * calling new_dev_desc() to allocate the descriptor and device memory. * - * See what I mean about userspace being boring? */ + * See what I mean about userspace being boring? + */ static struct device *new_device(const char *name, u16 type) { struct device *dev = malloc(sizeof(*dev)); @@ -1126,10 +1218,12 @@ static struct device *new_device(const char *name, u16 type) dev->num_vq = 0; dev->running = false; - /* Append to device list. Prepending to a single-linked list is + /* + * Append to device list. Prepending to a single-linked list is * easier, but the user expects the devices to be arranged on the bus * in command-line order. The first network device on the command line - * is eth0, the first block device /dev/vda, etc. */ + * is eth0, the first block device /dev/vda, etc. + */ if (devices.lastdev) devices.lastdev->next = dev; else @@ -1139,8 +1233,10 @@ static struct device *new_device(const char *name, u16 type) return dev; } -/* Our first setup routine is the console. It's a fairly simple device, but - * UNIX tty handling makes it uglier than it could be. */ +/* + * Our first setup routine is the console. It's a fairly simple device, but + * UNIX tty handling makes it uglier than it could be. + */ static void setup_console(void) { struct device *dev; @@ -1148,8 +1244,10 @@ static void setup_console(void) /* If we can save the initial standard input settings... */ if (tcgetattr(STDIN_FILENO, &orig_term) == 0) { struct termios term = orig_term; - /* Then we turn off echo, line buffering and ^C etc. We want a - * raw input stream to the Guest. */ + /* + * Then we turn off echo, line buffering and ^C etc: We want a + * raw input stream to the Guest. + */ term.c_lflag &= ~(ISIG|ICANON|ECHO); tcsetattr(STDIN_FILENO, TCSANOW, &term); } @@ -1160,10 +1258,12 @@ static void setup_console(void) dev->priv = malloc(sizeof(struct console_abort)); ((struct console_abort *)dev->priv)->count = 0; - /* The console needs two virtqueues: the input then the output. When + /* + * The console needs two virtqueues: the input then the output. When * they put something the input queue, we make sure we're listening to * stdin. When they put something in the output queue, we write it to - * stdout. */ + * stdout. + */ add_virtqueue(dev, VIRTQUEUE_NUM, console_input); add_virtqueue(dev, VIRTQUEUE_NUM, console_output); @@ -1171,7 +1271,8 @@ static void setup_console(void) } /*:*/ -/*M:010 Inter-guest networking is an interesting area. Simplest is to have a +/*M:010 + * Inter-guest networking is an interesting area. Simplest is to have a * --sharenet= option which opens or creates a named pipe. This can be * used to send packets to another guest in a 1:1 manner. * @@ -1185,7 +1286,8 @@ static void setup_console(void) * multiple inter-guest channels behind one interface, although it would * require some manner of hotplugging new virtio channels. * - * Finally, we could implement a virtio network switch in the kernel. :*/ + * Finally, we could implement a virtio network switch in the kernel. +:*/ static u32 str2ip(const char *ipaddr) { @@ -1210,11 +1312,13 @@ static void str2mac(const char *macaddr, unsigned char mac[6]) mac[5] = m[5]; } -/* This code is "adapted" from libbridge: it attaches the Host end of the +/* + * This code is "adapted" from libbridge: it attaches the Host end of the * network device to the bridge device specified by the command line. * * This is yet another James Morris contribution (I'm an IP-level guy, so I - * dislike bridging), and I just try not to break it. */ + * dislike bridging), and I just try not to break it. + */ static void add_to_bridge(int fd, const char *if_name, const char *br_name) { int ifidx; @@ -1234,9 +1338,11 @@ static void add_to_bridge(int fd, const char *if_name, const char *br_name) err(1, "can't add %s to bridge %s", if_name, br_name); } -/* This sets up the Host end of the network device with an IP address, brings +/* + * This sets up the Host end of the network device with an IP address, brings * it up so packets will flow, the copies the MAC address into the hwaddr - * pointer. */ + * pointer. + */ static void configure_device(int fd, const char *tapif, u32 ipaddr) { struct ifreq ifr; @@ -1263,10 +1369,12 @@ static int get_tun_device(char tapif[IFNAMSIZ]) /* Start with this zeroed. Messy but sure. */ memset(&ifr, 0, sizeof(ifr)); - /* We open the /dev/net/tun device and tell it we want a tap device. A + /* + * We open the /dev/net/tun device and tell it we want a tap device. A * tap device is like a tun device, only somehow different. To tell * the truth, I completely blundered my way through this code, but it - * works now! */ + * works now! + */ netfd = open_or_die("/dev/net/tun", O_RDWR); ifr.ifr_flags = IFF_TAP | IFF_NO_PI | IFF_VNET_HDR; strcpy(ifr.ifr_name, "tap%d"); @@ -1277,18 +1385,22 @@ static int get_tun_device(char tapif[IFNAMSIZ]) TUN_F_CSUM|TUN_F_TSO4|TUN_F_TSO6|TUN_F_TSO_ECN) != 0) err(1, "Could not set features for tun device"); - /* We don't need checksums calculated for packets coming in this - * device: trust us! */ + /* + * We don't need checksums calculated for packets coming in this + * device: trust us! + */ ioctl(netfd, TUNSETNOCSUM, 1); memcpy(tapif, ifr.ifr_name, IFNAMSIZ); return netfd; } -/*L:195 Our network is a Host<->Guest network. This can either use bridging or +/*L:195 + * Our network is a Host<->Guest network. This can either use bridging or * routing, but the principle is the same: it uses the "tun" device to inject * packets into the Host as if they came in from a normal network card. We - * just shunt packets between the Guest and the tun device. */ + * just shunt packets between the Guest and the tun device. + */ static void setup_tun_net(char *arg) { struct device *dev; @@ -1305,13 +1417,14 @@ static void setup_tun_net(char *arg) dev = new_device("net", VIRTIO_ID_NET); dev->priv = net_info; - /* Network devices need a receive and a send queue, just like - * console. */ + /* Network devices need a recv and a send queue, just like console. */ add_virtqueue(dev, VIRTQUEUE_NUM, net_input); add_virtqueue(dev, VIRTQUEUE_NUM, net_output); - /* We need a socket to perform the magic network ioctls to bring up the - * tap interface, connect to the bridge etc. Any socket will do! */ + /* + * We need a socket to perform the magic network ioctls to bring up the + * tap interface, connect to the bridge etc. Any socket will do! + */ ipfd = socket(PF_INET, SOCK_DGRAM, IPPROTO_IP); if (ipfd < 0) err(1, "opening IP socket"); @@ -1366,7 +1479,8 @@ static void setup_tun_net(char *arg) devices.device_num, tapif, arg); } -/* Our block (disk) device should be really simple: the Guest asks for a block +/* + * Our block (disk) device should be really simple: the Guest asks for a block * number and we read or write that position in the file. Unfortunately, that * was amazingly slow: the Guest waits until the read is finished before * running anything else, even if it could have been doing useful work. @@ -1374,7 +1488,9 @@ static void setup_tun_net(char *arg) * We could use async I/O, except it's reputed to suck so hard that characters * actually go missing from your code when you try to use it. * - * So we farm the I/O out to thread, and communicate with it via a pipe. */ + * So this was one reason why lguest now does all virtqueue servicing in + * separate threads: it's more efficient and more like a real device. + */ /* This hangs off device->priv. */ struct vblk_info @@ -1412,9 +1528,11 @@ static void blk_request(struct virtqueue *vq) /* Get the next request. */ head = wait_for_vq_desc(vq, iov, &out_num, &in_num); - /* Every block request should contain at least one output buffer + /* + * Every block request should contain at least one output buffer * (detailing the location on disk and the type of request) and one - * input buffer (to hold the result). */ + * input buffer (to hold the result). + */ if (out_num == 0 || in_num == 0) errx(1, "Bad virtblk cmd %u out=%u in=%u", head, out_num, in_num); @@ -1423,33 +1541,41 @@ static void blk_request(struct virtqueue *vq) in = convert(&iov[out_num+in_num-1], u8); off = out->sector * 512; - /* The block device implements "barriers", where the Guest indicates + /* + * The block device implements "barriers", where the Guest indicates * that it wants all previous writes to occur before this write. We * don't have a way of asking our kernel to do a barrier, so we just - * synchronize all the data in the file. Pretty poor, no? */ + * synchronize all the data in the file. Pretty poor, no? + */ if (out->type & VIRTIO_BLK_T_BARRIER) fdatasync(vblk->fd); - /* In general the virtio block driver is allowed to try SCSI commands. - * It'd be nice if we supported eject, for example, but we don't. */ + /* + * In general the virtio block driver is allowed to try SCSI commands. + * It'd be nice if we supported eject, for example, but we don't. + */ if (out->type & VIRTIO_BLK_T_SCSI_CMD) { fprintf(stderr, "Scsi commands unsupported\n"); *in = VIRTIO_BLK_S_UNSUPP; wlen = sizeof(*in); } else if (out->type & VIRTIO_BLK_T_OUT) { - /* Write */ - - /* Move to the right location in the block file. This can fail - * if they try to write past end. */ + /* + * Write + * + * Move to the right location in the block file. This can fail + * if they try to write past end. + */ if (lseek64(vblk->fd, off, SEEK_SET) != off) err(1, "Bad seek to sector %llu", out->sector); ret = writev(vblk->fd, iov+1, out_num-1); verbose("WRITE to sector %llu: %i\n", out->sector, ret); - /* Grr... Now we know how long the descriptor they sent was, we + /* + * Grr... Now we know how long the descriptor they sent was, we * make sure they didn't try to write over the end of the block - * file (possibly extending it). */ + * file (possibly extending it). + */ if (ret > 0 && off + ret > vblk->len) { /* Trim it back to the correct length */ ftruncate64(vblk->fd, vblk->len); @@ -1459,10 +1585,12 @@ static void blk_request(struct virtqueue *vq) wlen = sizeof(*in); *in = (ret >= 0 ? VIRTIO_BLK_S_OK : VIRTIO_BLK_S_IOERR); } else { - /* Read */ - - /* Move to the right location in the block file. This can fail - * if they try to read past end. */ + /* + * Read + * + * Move to the right location in the block file. This can fail + * if they try to read past end. + */ if (lseek64(vblk->fd, off, SEEK_SET) != off) err(1, "Bad seek to sector %llu", out->sector); @@ -1477,10 +1605,12 @@ static void blk_request(struct virtqueue *vq) } } - /* OK, so we noted that it was pretty poor to use an fdatasync as a + /* + * OK, so we noted that it was pretty poor to use an fdatasync as a * barrier. But Christoph Hellwig points out that we need a sync * *afterwards* as well: "Barriers specify no reordering to the front - * or the back." And Jens Axboe confirmed it, so here we are: */ + * or the back." And Jens Axboe confirmed it, so here we are: + */ if (out->type & VIRTIO_BLK_T_BARRIER) fdatasync(vblk->fd); @@ -1494,7 +1624,7 @@ static void setup_block_file(const char *filename) struct vblk_info *vblk; struct virtio_blk_config conf; - /* The device responds to return from I/O thread. */ + /* Creat the device. */ dev = new_device("block", VIRTIO_ID_BLOCK); /* The device has one virtqueue, where the Guest places requests. */ @@ -1513,8 +1643,10 @@ static void setup_block_file(const char *filename) /* Tell Guest how many sectors this device has. */ conf.capacity = cpu_to_le64(vblk->len / 512); - /* Tell Guest not to put in too many descriptors at once: two are used - * for the in and out elements. */ + /* + * Tell Guest not to put in too many descriptors at once: two are used + * for the in and out elements. + */ add_feature(dev, VIRTIO_BLK_F_SEG_MAX); conf.seg_max = cpu_to_le32(VIRTQUEUE_NUM - 2); @@ -1525,16 +1657,18 @@ static void setup_block_file(const char *filename) ++devices.device_num, le64_to_cpu(conf.capacity)); } -struct rng_info { - int rfd; -}; - -/* Our random number generator device reads from /dev/random into the Guest's +/*L:211 + * Our random number generator device reads from /dev/random into the Guest's * input buffers. The usual case is that the Guest doesn't want random numbers * and so has no buffers although /dev/random is still readable, whereas * console is the reverse. * - * The same logic applies, however. */ + * The same logic applies, however. + */ +struct rng_info { + int rfd; +}; + static void rng_input(struct virtqueue *vq) { int len; @@ -1547,9 +1681,11 @@ static void rng_input(struct virtqueue *vq) if (out_num) errx(1, "Output buffers in rng?"); - /* This is why we convert to iovecs: the readv() call uses them, and so + /* + * This is why we convert to iovecs: the readv() call uses them, and so * it reads straight into the Guest's buffer. We loop to make sure we - * fill it. */ + * fill it. + */ while (!iov_empty(iov, in_num)) { len = readv(rng_info->rfd, iov, in_num); if (len <= 0) @@ -1562,15 +1698,18 @@ static void rng_input(struct virtqueue *vq) add_used(vq, head, totlen); } -/* And this creates a "hardware" random number device for the Guest. */ +/*L:199 + * This creates a "hardware" random number device for the Guest. + */ static void setup_rng(void) { struct device *dev; struct rng_info *rng_info = malloc(sizeof(*rng_info)); + /* Our device's privat info simply contains the /dev/random fd. */ rng_info->rfd = open_or_die("/dev/random", O_RDONLY); - /* The device responds to return from I/O thread. */ + /* Create the new device. */ dev = new_device("rng", VIRTIO_ID_RNG); dev->priv = rng_info; @@ -1586,8 +1725,10 @@ static void __attribute__((noreturn)) restart_guest(void) { unsigned int i; - /* Since we don't track all open fds, we simply close everything beyond - * stderr. */ + /* + * Since we don't track all open fds, we simply close everything beyond + * stderr. + */ for (i = 3; i < FD_SETSIZE; i++) close(i); @@ -1598,8 +1739,10 @@ static void __attribute__((noreturn)) restart_guest(void) err(1, "Could not exec %s", main_args[0]); } -/*L:220 Finally we reach the core of the Launcher which runs the Guest, serves - * its input and output, and finally, lays it to rest. */ +/*L:220 + * Finally we reach the core of the Launcher which runs the Guest, serves + * its input and output, and finally, lays it to rest. + */ static void __attribute__((noreturn)) run_guest(void) { for (;;) { @@ -1634,7 +1777,7 @@ static void __attribute__((noreturn)) run_guest(void) * * Are you ready? Take a deep breath and join me in the core of the Host, in * "make Host". - :*/ +:*/ static struct option opts[] = { { "verbose", 0, NULL, 'v' }, @@ -1655,8 +1798,7 @@ static void usage(void) /*L:105 The main routine is where the real work begins: */ int main(int argc, char *argv[]) { - /* Memory, top-level pagetable, code startpoint and size of the - * (optional) initrd. */ + /* Memory, code startpoint and size of the (optional) initrd. */ unsigned long mem = 0, start, initrd_size = 0; /* Two temporaries. */ int i, c; @@ -1668,24 +1810,30 @@ int main(int argc, char *argv[]) /* Save the args: we "reboot" by execing ourselves again. */ main_args = argv; - /* First we initialize the device list. We keep a pointer to the last + /* + * First we initialize the device list. We keep a pointer to the last * device, and the next interrupt number to use for devices (1: - * remember that 0 is used by the timer). */ + * remember that 0 is used by the timer). + */ devices.lastdev = NULL; devices.next_irq = 1; cpu_id = 0; - /* We need to know how much memory so we can set up the device + /* + * We need to know how much memory so we can set up the device * descriptor and memory pages for the devices as we parse the command * line. So we quickly look through the arguments to find the amount - * of memory now. */ + * of memory now. + */ for (i = 1; i < argc; i++) { if (argv[i][0] != '-') { mem = atoi(argv[i]) * 1024 * 1024; - /* We start by mapping anonymous pages over all of + /* + * We start by mapping anonymous pages over all of * guest-physical memory range. This fills it with 0, * and ensures that the Guest won't be killed when it - * tries to access it. */ + * tries to access it. + */ guest_base = map_zeroed_pages(mem / getpagesize() + DEVICE_PAGES); guest_limit = mem; @@ -1718,8 +1866,10 @@ int main(int argc, char *argv[]) usage(); } } - /* After the other arguments we expect memory and kernel image name, - * followed by command line arguments for the kernel. */ + /* + * After the other arguments we expect memory and kernel image name, + * followed by command line arguments for the kernel. + */ if (optind + 2 > argc) usage(); @@ -1737,20 +1887,26 @@ int main(int argc, char *argv[]) /* Map the initrd image if requested (at top of physical memory) */ if (initrd_name) { initrd_size = load_initrd(initrd_name, mem); - /* These are the location in the Linux boot header where the - * start and size of the initrd are expected to be found. */ + /* + * These are the location in the Linux boot header where the + * start and size of the initrd are expected to be found. + */ boot->hdr.ramdisk_image = mem - initrd_size; boot->hdr.ramdisk_size = initrd_size; /* The bootloader type 0xFF means "unknown"; that's OK. */ boot->hdr.type_of_loader = 0xFF; } - /* The Linux boot header contains an "E820" memory map: ours is a - * simple, single region. */ + /* + * The Linux boot header contains an "E820" memory map: ours is a + * simple, single region. + */ boot->e820_entries = 1; boot->e820_map[0] = ((struct e820entry) { 0, mem, E820_RAM }); - /* The boot header contains a command line pointer: we put the command - * line after the boot header. */ + /* + * The boot header contains a command line pointer: we put the command + * line after the boot header. + */ boot->hdr.cmd_line_ptr = to_guest_phys(boot + 1); /* We use a simple helper to copy the arguments separated by spaces. */ concat((char *)(boot + 1), argv+optind+2); @@ -1764,8 +1920,10 @@ int main(int argc, char *argv[]) /* Tell the entry path not to try to reload segment registers. */ boot->hdr.loadflags |= KEEP_SEGMENTS; - /* We tell the kernel to initialize the Guest: this returns the open - * /dev/lguest file descriptor. */ + /* + * We tell the kernel to initialize the Guest: this returns the open + * /dev/lguest file descriptor. + */ tell_kernel(start); /* Ensure that we terminate if a child dies. */ diff --git a/arch/x86/include/asm/lguest.h b/arch/x86/include/asm/lguest.h index 313389cd50d..5136dad57cb 100644 --- a/arch/x86/include/asm/lguest.h +++ b/arch/x86/include/asm/lguest.h @@ -17,8 +17,7 @@ /* Pages for switcher itself, then two pages per cpu */ #define TOTAL_SWITCHER_PAGES (SHARED_SWITCHER_PAGES + 2 * nr_cpu_ids) -/* We map at -4M (-2M when PAE is activated) for ease of mapping - * into the guest (one PTE page). */ +/* We map at -4M (-2M for PAE) for ease of mapping (one PTE page). */ #ifdef CONFIG_X86_PAE #define SWITCHER_ADDR 0xFFE00000 #else diff --git a/arch/x86/include/asm/lguest_hcall.h b/arch/x86/include/asm/lguest_hcall.h index 33600a66755..cceb73e12e5 100644 --- a/arch/x86/include/asm/lguest_hcall.h +++ b/arch/x86/include/asm/lguest_hcall.h @@ -30,7 +30,8 @@ #include #include -/*G:030 But first, how does our Guest contact the Host to ask for privileged +/*G:030 + * But first, how does our Guest contact the Host to ask for privileged * operations? There are two ways: the direct way is to make a "hypercall", * to make requests of the Host Itself. * @@ -41,16 +42,15 @@ * * Grossly invalid calls result in Sudden Death at the hands of the vengeful * Host, rather than returning failure. This reflects Winston Churchill's - * definition of a gentleman: "someone who is only rude intentionally". */ -/*:*/ + * definition of a gentleman: "someone who is only rude intentionally". +:*/ /* Can't use our min() macro here: needs to be a constant */ #define LGUEST_IRQS (NR_IRQS < 32 ? NR_IRQS: 32) #define LHCALL_RING_SIZE 64 struct hcall_args { - /* These map directly onto eax, ebx, ecx, edx and esi - * in struct lguest_regs */ + /* These map directly onto eax/ebx/ecx/edx/esi in struct lguest_regs */ unsigned long arg0, arg1, arg2, arg3, arg4; }; diff --git a/arch/x86/lguest/boot.c b/arch/x86/lguest/boot.c index f2bf1f73d46..025c04d18f2 100644 --- a/arch/x86/lguest/boot.c +++ b/arch/x86/lguest/boot.c @@ -22,7 +22,8 @@ * * So how does the kernel know it's a Guest? We'll see that later, but let's * just say that we end up here where we replace the native functions various - * "paravirt" structures with our Guest versions, then boot like normal. :*/ + * "paravirt" structures with our Guest versions, then boot like normal. +:*/ /* * Copyright (C) 2006, Rusty Russell IBM Corporation. @@ -74,7 +75,8 @@ * * The Guest in our tale is a simple creature: identical to the Host but * behaving in simplified but equivalent ways. In particular, the Guest is the - * same kernel as the Host (or at least, built from the same source code). :*/ + * same kernel as the Host (or at least, built from the same source code). +:*/ struct lguest_data lguest_data = { .hcall_status = { [0 ... LHCALL_RING_SIZE-1] = 0xFF }, @@ -85,7 +87,8 @@ struct lguest_data lguest_data = { .syscall_vec = SYSCALL_VECTOR, }; -/*G:037 async_hcall() is pretty simple: I'm quite proud of it really. We have a +/*G:037 + * async_hcall() is pretty simple: I'm quite proud of it really. We have a * ring buffer of stored hypercalls which the Host will run though next time we * do a normal hypercall. Each entry in the ring has 5 slots for the hypercall * arguments, and a "hcall_status" word which is 0 if the call is ready to go, @@ -94,7 +97,8 @@ struct lguest_data lguest_data = { * If we come around to a slot which hasn't been finished, then the table is * full and we just make the hypercall directly. This has the nice side * effect of causing the Host to run all the stored calls in the ring buffer - * which empties it for next time! */ + * which empties it for next time! + */ static void async_hcall(unsigned long call, unsigned long arg1, unsigned long arg2, unsigned long arg3, unsigned long arg4) @@ -103,9 +107,11 @@ static void async_hcall(unsigned long call, unsigned long arg1, static unsigned int next_call; unsigned long flags; - /* Disable interrupts if not already disabled: we don't want an + /* + * Disable interrupts if not already disabled: we don't want an * interrupt handler making a hypercall while we're already doing - * one! */ + * one! + */ local_irq_save(flags); if (lguest_data.hcall_status[next_call] != 0xFF) { /* Table full, so do normal hcall which will flush table. */ @@ -125,8 +131,9 @@ static void async_hcall(unsigned long call, unsigned long arg1, local_irq_restore(flags); } -/*G:035 Notice the lazy_hcall() above, rather than hcall(). This is our first - * real optimization trick! +/*G:035 + * Notice the lazy_hcall() above, rather than hcall(). This is our first real + * optimization trick! * * When lazy_mode is set, it means we're allowed to defer all hypercalls and do * them as a batch when lazy_mode is eventually turned off. Because hypercalls @@ -136,7 +143,8 @@ static void async_hcall(unsigned long call, unsigned long arg1, * lguest_leave_lazy_mode(). * * So, when we're in lazy mode, we call async_hcall() to store the call for - * future processing: */ + * future processing: + */ static void lazy_hcall1(unsigned long call, unsigned long arg1) { @@ -208,9 +216,11 @@ static void lguest_end_context_switch(struct task_struct *next) * check there before it tries to deliver an interrupt. */ -/* save_flags() is expected to return the processor state (ie. "flags"). The +/* + * save_flags() is expected to return the processor state (ie. "flags"). The * flags word contains all kind of stuff, but in practice Linux only cares - * about the interrupt flag. Our "save_flags()" just returns that. */ + * about the interrupt flag. Our "save_flags()" just returns that. + */ static unsigned long save_fl(void) { return lguest_data.irq_enabled; @@ -222,13 +232,15 @@ static void irq_disable(void) lguest_data.irq_enabled = 0; } -/* Let's pause a moment. Remember how I said these are called so often? +/* + * Let's pause a moment. Remember how I said these are called so often? * Jeremy Fitzhardinge optimized them so hard early in 2009 that he had to * break some rules. In particular, these functions are assumed to save their * own registers if they need to: normal C functions assume they can trash the * eax register. To use normal C functions, we use * PV_CALLEE_SAVE_REGS_THUNK(), which pushes %eax onto the stack, calls the - * C function, then restores it. */ + * C function, then restores it. + */ PV_CALLEE_SAVE_REGS_THUNK(save_fl); PV_CALLEE_SAVE_REGS_THUNK(irq_disable); /*:*/ @@ -237,18 +249,20 @@ PV_CALLEE_SAVE_REGS_THUNK(irq_disable); extern void lg_irq_enable(void); extern void lg_restore_fl(unsigned long flags); -/*M:003 Note that we don't check for outstanding interrupts when we re-enable - * them (or when we unmask an interrupt). This seems to work for the moment, - * since interrupts are rare and we'll just get the interrupt on the next timer - * tick, but now we can run with CONFIG_NO_HZ, we should revisit this. One way - * would be to put the "irq_enabled" field in a page by itself, and have the - * Host write-protect it when an interrupt comes in when irqs are disabled. - * There will then be a page fault as soon as interrupts are re-enabled. +/*M:003 + * Note that we don't check for outstanding interrupts when we re-enable them + * (or when we unmask an interrupt). This seems to work for the moment, since + * interrupts are rare and we'll just get the interrupt on the next timer tick, + * but now we can run with CONFIG_NO_HZ, we should revisit this. One way would + * be to put the "irq_enabled" field in a page by itself, and have the Host + * write-protect it when an interrupt comes in when irqs are disabled. There + * will then be a page fault as soon as interrupts are re-enabled. * * A better method is to implement soft interrupt disable generally for x86: * instead of disabling interrupts, we set a flag. If an interrupt does come * in, we then disable them for real. This is uncommon, so we could simply use - * a hypercall for interrupt control and not worry about efficiency. :*/ + * a hypercall for interrupt control and not worry about efficiency. +:*/ /*G:034 * The Interrupt Descriptor Table (IDT). @@ -261,10 +275,12 @@ extern void lg_restore_fl(unsigned long flags); static void lguest_write_idt_entry(gate_desc *dt, int entrynum, const gate_desc *g) { - /* The gate_desc structure is 8 bytes long: we hand it to the Host in + /* + * The gate_desc structure is 8 bytes long: we hand it to the Host in * two 32-bit chunks. The whole 32-bit kernel used to hand descriptors * around like this; typesafety wasn't a big concern in Linux's early - * years. */ + * years. + */ u32 *desc = (u32 *)g; /* Keep the local copy up to date. */ native_write_idt_entry(dt, entrynum, g); @@ -272,9 +288,11 @@ static void lguest_write_idt_entry(gate_desc *dt, kvm_hypercall3(LHCALL_LOAD_IDT_ENTRY, entrynum, desc[0], desc[1]); } -/* Changing to a different IDT is very rare: we keep the IDT up-to-date every +/* + * Changing to a different IDT is very rare: we keep the IDT up-to-date every * time it is written, so we can simply loop through all entries and tell the - * Host about them. */ + * Host about them. + */ static void lguest_load_idt(const struct desc_ptr *desc) { unsigned int i; @@ -305,9 +323,11 @@ static void lguest_load_gdt(const struct desc_ptr *desc) kvm_hypercall3(LHCALL_LOAD_GDT_ENTRY, i, gdt[i].a, gdt[i].b); } -/* For a single GDT entry which changes, we do the lazy thing: alter our GDT, +/* + * For a single GDT entry which changes, we do the lazy thing: alter our GDT, * then tell the Host to reload the entire thing. This operation is so rare - * that this naive implementation is reasonable. */ + * that this naive implementation is reasonable. + */ static void lguest_write_gdt_entry(struct desc_struct *dt, int entrynum, const void *desc, int type) { @@ -317,29 +337,36 @@ static void lguest_write_gdt_entry(struct desc_struct *dt, int entrynum, dt[entrynum].a, dt[entrynum].b); } -/* OK, I lied. There are three "thread local storage" GDT entries which change +/* + * OK, I lied. There are three "thread local storage" GDT entries which change * on every context switch (these three entries are how glibc implements - * __thread variables). So we have a hypercall specifically for this case. */ + * __thread variables). So we have a hypercall specifically for this case. + */ static void lguest_load_tls(struct thread_struct *t, unsigned int cpu) { - /* There's one problem which normal hardware doesn't have: the Host + /* + * There's one problem which normal hardware doesn't have: the Host * can't handle us removing entries we're currently using. So we clear - * the GS register here: if it's needed it'll be reloaded anyway. */ + * the GS register here: if it's needed it'll be reloaded anyway. + */ lazy_load_gs(0); lazy_hcall2(LHCALL_LOAD_TLS, __pa(&t->tls_array), cpu); } -/*G:038 That's enough excitement for now, back to ploughing through each of - * the different pv_ops structures (we're about 1/3 of the way through). +/*G:038 + * That's enough excitement for now, back to ploughing through each of the + * different pv_ops structures (we're about 1/3 of the way through). * * This is the Local Descriptor Table, another weird Intel thingy. Linux only * uses this for some strange applications like Wine. We don't do anything - * here, so they'll get an informative and friendly Segmentation Fault. */ + * here, so they'll get an informative and friendly Segmentation Fault. + */ static void lguest_set_ldt(const void *addr, unsigned entries) { } -/* This loads a GDT entry into the "Task Register": that entry points to a +/* + * This loads a GDT entry into the "Task Register": that entry points to a * structure called the Task State Segment. Some comments scattered though the * kernel code indicate that this used for task switching in ages past, along * with blood sacrifice and astrology. @@ -347,19 +374,21 @@ static void lguest_set_ldt(const void *addr, unsigned entries) * Now there's nothing interesting in here that we don't get told elsewhere. * But the native version uses the "ltr" instruction, which makes the Host * complain to the Guest about a Segmentation Fault and it'll oops. So we - * override the native version with a do-nothing version. */ + * override the native version with a do-nothing version. + */ static void lguest_load_tr_desc(void) { } -/* The "cpuid" instruction is a way of querying both the CPU identity +/* + * The "cpuid" instruction is a way of querying both the CPU identity * (manufacturer, model, etc) and its features. It was introduced before the * Pentium in 1993 and keeps getting extended by both Intel, AMD and others. * As you might imagine, after a decade and a half this treatment, it is now a * giant ball of hair. Its entry in the current Intel manual runs to 28 pages. * * This instruction even it has its own Wikipedia entry. The Wikipedia entry - * has been translated into 4 languages. I am not making this up! + * has been translated into 5 languages. I am not making this up! * * We could get funky here and identify ourselves as "GenuineLguest", but * instead we just use the real "cpuid" instruction. Then I pretty much turned @@ -371,7 +400,8 @@ static void lguest_load_tr_desc(void) * Replacing the cpuid so we can turn features off is great for the kernel, but * anyone (including userspace) can just use the raw "cpuid" instruction and * the Host won't even notice since it isn't privileged. So we try not to get - * too worked up about it. */ + * too worked up about it. + */ static void lguest_cpuid(unsigned int *ax, unsigned int *bx, unsigned int *cx, unsigned int *dx) { @@ -379,43 +409,63 @@ static void lguest_cpuid(unsigned int *ax, unsigned int *bx, native_cpuid(ax, bx, cx, dx); switch (function) { - case 0: /* ID and highest CPUID. Futureproof a little by sticking to - * older ones. */ + /* + * CPUID 0 gives the highest legal CPUID number (and the ID string). + * We futureproof our code a little by sticking to known CPUID values. + */ + case 0: if (*ax > 5) *ax = 5; break; - case 1: /* Basic feature request. */ - /* We only allow kernel to see SSE3, CMPXCHG16B and SSSE3 */ + + /* + * CPUID 1 is a basic feature request. + * + * CX: we only allow kernel to see SSE3, CMPXCHG16B and SSSE3 + * DX: SSE, SSE2, FXSR, MMX, CMOV, CMPXCHG8B, TSC, FPU and PAE. + */ + case 1: *cx &= 0x00002201; - /* SSE, SSE2, FXSR, MMX, CMOV, CMPXCHG8B, TSC, FPU, PAE. */ *dx &= 0x07808151; - /* The Host can do a nice optimization if it knows that the + /* + * The Host can do a nice optimization if it knows that the * kernel mappings (addresses above 0xC0000000 or whatever * PAGE_OFFSET is set to) haven't changed. But Linux calls * flush_tlb_user() for both user and kernel mappings unless - * the Page Global Enable (PGE) feature bit is set. */ + * the Page Global Enable (PGE) feature bit is set. + */ *dx |= 0x00002000; - /* We also lie, and say we're family id 5. 6 or greater + /* + * We also lie, and say we're family id 5. 6 or greater * leads to a rdmsr in early_init_intel which we can't handle. - * Family ID is returned as bits 8-12 in ax. */ + * Family ID is returned as bits 8-12 in ax. + */ *ax &= 0xFFFFF0FF; *ax |= 0x00000500; break; + /* + * 0x80000000 returns the highest Extended Function, so we futureproof + * like we do above by limiting it to known fields. + */ case 0x80000000: - /* Futureproof this a little: if they ask how much extended - * processor information there is, limit it to known fields. */ if (*ax > 0x80000008) *ax = 0x80000008; break; + + /* + * PAE systems can mark pages as non-executable. Linux calls this the + * NX bit. Intel calls it XD (eXecute Disable), AMD EVP (Enhanced + * Virus Protection). We just switch turn if off here, since we don't + * support it. + */ case 0x80000001: - /* Here we should fix nx cap depending on host. */ - /* For this version of PAE, we just clear NX bit. */ *dx &= ~(1 << 20); break; } } -/* Intel has four control registers, imaginatively named cr0, cr2, cr3 and cr4. +/* + * Intel has four control registers, imaginatively named cr0, cr2, cr3 and cr4. * I assume there's a cr1, but it hasn't bothered us yet, so we'll not bother * it. The Host needs to know when the Guest wants to change them, so we have * a whole series of functions like read_cr0() and write_cr0(). @@ -430,7 +480,8 @@ static void lguest_cpuid(unsigned int *ax, unsigned int *bx, * name like "FPUTRAP bit" be a little less cryptic? * * We store cr0 locally because the Host never changes it. The Guest sometimes - * wants to read it and we'd prefer not to bother the Host unnecessarily. */ + * wants to read it and we'd prefer not to bother the Host unnecessarily. + */ static unsigned long current_cr0; static void lguest_write_cr0(unsigned long val) { @@ -443,18 +494,22 @@ static unsigned long lguest_read_cr0(void) return current_cr0; } -/* Intel provided a special instruction to clear the TS bit for people too cool +/* + * Intel provided a special instruction to clear the TS bit for people too cool * to use write_cr0() to do it. This "clts" instruction is faster, because all - * the vowels have been optimized out. */ + * the vowels have been optimized out. + */ static void lguest_clts(void) { lazy_hcall1(LHCALL_TS, 0); current_cr0 &= ~X86_CR0_TS; } -/* cr2 is the virtual address of the last page fault, which the Guest only ever +/* + * cr2 is the virtual address of the last page fault, which the Guest only ever * reads. The Host kindly writes this into our "struct lguest_data", so we - * just read it out of there. */ + * just read it out of there. + */ static unsigned long lguest_read_cr2(void) { return lguest_data.cr2; @@ -463,10 +518,12 @@ static unsigned long lguest_read_cr2(void) /* See lguest_set_pte() below. */ static bool cr3_changed = false; -/* cr3 is the current toplevel pagetable page: the principle is the same as +/* + * cr3 is the current toplevel pagetable page: the principle is the same as * cr0. Keep a local copy, and tell the Host when it changes. The only * difference is that our local copy is in lguest_data because the Host needs - * to set it upon our initial hypercall. */ + * to set it upon our initial hypercall. + */ static void lguest_write_cr3(unsigned long cr3) { lguest_data.pgdir = cr3; @@ -538,10 +595,12 @@ static void lguest_write_cr4(unsigned long val) * the real page tables based on the Guests'. */ -/* The Guest calls this to set a second-level entry (pte), ie. to map a page +/* + * The Guest calls this to set a second-level entry (pte), ie. to map a page * into a process' address space. We set the entry then tell the Host the * toplevel and address this corresponds to. The Guest uses one pagetable per - * process, so we need to tell the Host which one we're changing (mm->pgd). */ + * process, so we need to tell the Host which one we're changing (mm->pgd). + */ static void lguest_pte_update(struct mm_struct *mm, unsigned long addr, pte_t *ptep) { @@ -560,10 +619,13 @@ static void lguest_set_pte_at(struct mm_struct *mm, unsigned long addr, lguest_pte_update(mm, addr, ptep); } -/* The Guest calls lguest_set_pud to set a top-level entry and lguest_set_pmd +/* + * The Guest calls lguest_set_pud to set a top-level entry and lguest_set_pmd * to set a middle-level entry when PAE is activated. + * * Again, we set the entry then tell the Host which page we changed, - * and the index of the entry we changed. */ + * and the index of the entry we changed. + */ #ifdef CONFIG_X86_PAE static void lguest_set_pud(pud_t *pudp, pud_t pudval) { @@ -582,8 +644,7 @@ static void lguest_set_pmd(pmd_t *pmdp, pmd_t pmdval) } #else -/* The Guest calls lguest_set_pmd to set a top-level entry when PAE is not - * activated. */ +/* The Guest calls lguest_set_pmd to set a top-level entry when !PAE. */ static void lguest_set_pmd(pmd_t *pmdp, pmd_t pmdval) { native_set_pmd(pmdp, pmdval); @@ -592,7 +653,8 @@ static void lguest_set_pmd(pmd_t *pmdp, pmd_t pmdval) } #endif -/* There are a couple of legacy places where the kernel sets a PTE, but we +/* + * There are a couple of legacy places where the kernel sets a PTE, but we * don't know the top level any more. This is useless for us, since we don't * know which pagetable is changing or what address, so we just tell the Host * to forget all of them. Fortunately, this is very rare. @@ -600,7 +662,8 @@ static void lguest_set_pmd(pmd_t *pmdp, pmd_t pmdval) * ... except in early boot when the kernel sets up the initial pagetables, * which makes booting astonishingly slow: 1.83 seconds! So we don't even tell * the Host anything changed until we've done the first page table switch, - * which brings boot back to 0.25 seconds. */ + * which brings boot back to 0.25 seconds. + */ static void lguest_set_pte(pte_t *ptep, pte_t pteval) { native_set_pte(ptep, pteval); @@ -628,7 +691,8 @@ void lguest_pmd_clear(pmd_t *pmdp) } #endif -/* Unfortunately for Lguest, the pv_mmu_ops for page tables were based on +/* + * Unfortunately for Lguest, the pv_mmu_ops for page tables were based on * native page table operations. On native hardware you can set a new page * table entry whenever you want, but if you want to remove one you have to do * a TLB flush (a TLB is a little cache of page table entries kept by the CPU). @@ -637,24 +701,29 @@ void lguest_pmd_clear(pmd_t *pmdp) * called when a valid entry is written, not when it's removed (ie. marked not * present). Instead, this is where we come when the Guest wants to remove a * page table entry: we tell the Host to set that entry to 0 (ie. the present - * bit is zero). */ + * bit is zero). + */ static void lguest_flush_tlb_single(unsigned long addr) { /* Simply set it to zero: if it was not, it will fault back in. */ lazy_hcall3(LHCALL_SET_PTE, lguest_data.pgdir, addr, 0); } -/* This is what happens after the Guest has removed a large number of entries. +/* + * This is what happens after the Guest has removed a large number of entries. * This tells the Host that any of the page table entries for userspace might - * have changed, ie. virtual addresses below PAGE_OFFSET. */ + * have changed, ie. virtual addresses below PAGE_OFFSET. + */ static void lguest_flush_tlb_user(void) { lazy_hcall1(LHCALL_FLUSH_TLB, 0); } -/* This is called when the kernel page tables have changed. That's not very +/* + * This is called when the kernel page tables have changed. That's not very * common (unless the Guest is using highmem, which makes the Guest extremely - * slow), so it's worth separating this from the user flushing above. */ + * slow), so it's worth separating this from the user flushing above. + */ static void lguest_flush_tlb_kernel(void) { lazy_hcall1(LHCALL_FLUSH_TLB, 1); @@ -691,23 +760,27 @@ static struct irq_chip lguest_irq_controller = { .unmask = enable_lguest_irq, }; -/* This sets up the Interrupt Descriptor Table (IDT) entry for each hardware +/* + * This sets up the Interrupt Descriptor Table (IDT) entry for each hardware * interrupt (except 128, which is used for system calls), and then tells the * Linux infrastructure that each interrupt is controlled by our level-based - * lguest interrupt controller. */ + * lguest interrupt controller. + */ static void __init lguest_init_IRQ(void) { unsigned int i; for (i = FIRST_EXTERNAL_VECTOR; i < NR_VECTORS; i++) { - /* Some systems map "vectors" to interrupts weirdly. Lguest has - * a straightforward 1 to 1 mapping, so force that here. */ + /* Some systems map "vectors" to interrupts weirdly. Not us! */ __get_cpu_var(vector_irq)[i] = i - FIRST_EXTERNAL_VECTOR; if (i != SYSCALL_VECTOR) set_intr_gate(i, interrupt[i - FIRST_EXTERNAL_VECTOR]); } - /* This call is required to set up for 4k stacks, where we have - * separate stacks for hard and soft interrupts. */ + + /* + * This call is required to set up for 4k stacks, where we have + * separate stacks for hard and soft interrupts. + */ irq_ctx_init(smp_processor_id()); } @@ -729,31 +802,39 @@ static unsigned long lguest_get_wallclock(void) return lguest_data.time.tv_sec; } -/* The TSC is an Intel thing called the Time Stamp Counter. The Host tells us +/* + * The TSC is an Intel thing called the Time Stamp Counter. The Host tells us * what speed it runs at, or 0 if it's unusable as a reliable clock source. * This matches what we want here: if we return 0 from this function, the x86 - * TSC clock will give up and not register itself. */ + * TSC clock will give up and not register itself. + */ static unsigned long lguest_tsc_khz(void) { return lguest_data.tsc_khz; } -/* If we can't use the TSC, the kernel falls back to our lower-priority - * "lguest_clock", where we read the time value given to us by the Host. */ +/* + * If we can't use the TSC, the kernel falls back to our lower-priority + * "lguest_clock", where we read the time value given to us by the Host. + */ static cycle_t lguest_clock_read(struct clocksource *cs) { unsigned long sec, nsec; - /* Since the time is in two parts (seconds and nanoseconds), we risk + /* + * Since the time is in two parts (seconds and nanoseconds), we risk * reading it just as it's changing from 99 & 0.999999999 to 100 and 0, * and getting 99 and 0. As Linux tends to come apart under the stress - * of time travel, we must be careful: */ + * of time travel, we must be careful: + */ do { /* First we read the seconds part. */ sec = lguest_data.time.tv_sec; - /* This read memory barrier tells the compiler and the CPU that + /* + * This read memory barrier tells the compiler and the CPU that * this can't be reordered: we have to complete the above - * before going on. */ + * before going on. + */ rmb(); /* Now we read the nanoseconds part. */ nsec = lguest_data.time.tv_nsec; @@ -777,9 +858,11 @@ static struct clocksource lguest_clock = { .flags = CLOCK_SOURCE_IS_CONTINUOUS, }; -/* We also need a "struct clock_event_device": Linux asks us to set it to go +/* + * We also need a "struct clock_event_device": Linux asks us to set it to go * off some time in the future. Actually, James Morris figured all this out, I - * just applied the patch. */ + * just applied the patch. + */ static int lguest_clockevent_set_next_event(unsigned long delta, struct clock_event_device *evt) { @@ -829,8 +912,10 @@ static struct clock_event_device lguest_clockevent = { .max_delta_ns = LG_CLOCK_MAX_DELTA, }; -/* This is the Guest timer interrupt handler (hardware interrupt 0). We just - * call the clockevent infrastructure and it does whatever needs doing. */ +/* + * This is the Guest timer interrupt handler (hardware interrupt 0). We just + * call the clockevent infrastructure and it does whatever needs doing. + */ static void lguest_time_irq(unsigned int irq, struct irq_desc *desc) { unsigned long flags; @@ -841,10 +926,12 @@ static void lguest_time_irq(unsigned int irq, struct irq_desc *desc) local_irq_restore(flags); } -/* At some point in the boot process, we get asked to set up our timing +/* + * At some point in the boot process, we get asked to set up our timing * infrastructure. The kernel doesn't expect timer interrupts before this, but * we cleverly initialized the "blocked_interrupts" field of "struct - * lguest_data" so that timer interrupts were blocked until now. */ + * lguest_data" so that timer interrupts were blocked until now. + */ static void lguest_time_init(void) { /* Set up the timer interrupt (0) to go to our simple timer routine */ @@ -868,14 +955,16 @@ static void lguest_time_init(void) * to work. They're pretty simple. */ -/* The Guest needs to tell the Host what stack it expects traps to use. For +/* + * The Guest needs to tell the Host what stack it expects traps to use. For * native hardware, this is part of the Task State Segment mentioned above in * lguest_load_tr_desc(), but to help hypervisors there's this special call. * * We tell the Host the segment we want to use (__KERNEL_DS is the kernel data * segment), the privilege level (we're privilege level 1, the Host is 0 and * will not tolerate us trying to use that), the stack pointer, and the number - * of pages in the stack. */ + * of pages in the stack. + */ static void lguest_load_sp0(struct tss_struct *tss, struct thread_struct *thread) { @@ -889,7 +978,8 @@ static void lguest_set_debugreg(int regno, unsigned long value) /* FIXME: Implement */ } -/* There are times when the kernel wants to make sure that no memory writes are +/* + * There are times when the kernel wants to make sure that no memory writes are * caught in the cache (that they've all reached real hardware devices). This * doesn't matter for the Guest which has virtual hardware. * @@ -903,11 +993,13 @@ static void lguest_wbinvd(void) { } -/* If the Guest expects to have an Advanced Programmable Interrupt Controller, +/* + * If the Guest expects to have an Advanced Programmable Interrupt Controller, * we play dumb by ignoring writes and returning 0 for reads. So it's no * longer Programmable nor Controlling anything, and I don't think 8 lines of * code qualifies for Advanced. It will also never interrupt anything. It - * does, however, allow us to get through the Linux boot code. */ + * does, however, allow us to get through the Linux boot code. + */ #ifdef CONFIG_X86_LOCAL_APIC static void lguest_apic_write(u32 reg, u32 v) { @@ -956,11 +1048,13 @@ static void lguest_safe_halt(void) kvm_hypercall0(LHCALL_HALT); } -/* The SHUTDOWN hypercall takes a string to describe what's happening, and +/* + * The SHUTDOWN hypercall takes a string to describe what's happening, and * an argument which says whether this to restart (reboot) the Guest or not. * * Note that the Host always prefers that the Guest speak in physical addresses - * rather than virtual addresses, so we use __pa() here. */ + * rather than virtual addresses, so we use __pa() here. + */ static void lguest_power_off(void) { kvm_hypercall2(LHCALL_SHUTDOWN, __pa("Power down"), @@ -991,8 +1085,10 @@ static __init char *lguest_memory_setup(void) * nice to move it back to lguest_init. Patch welcome... */ atomic_notifier_chain_register(&panic_notifier_list, &paniced); - /* The Linux bootloader header contains an "e820" memory map: the - * Launcher populated the first entry with our memory limit. */ + /* + *The Linux bootloader header contains an "e820" memory map: the + * Launcher populated the first entry with our memory limit. + */ e820_add_region(boot_params.e820_map[0].addr, boot_params.e820_map[0].size, boot_params.e820_map[0].type); @@ -1001,16 +1097,17 @@ static __init char *lguest_memory_setup(void) return "LGUEST"; } -/* We will eventually use the virtio console device to produce console output, +/* + * We will eventually use the virtio console device to produce console output, * but before that is set up we use LHCALL_NOTIFY on normal memory to produce - * console output. */ + * console output. + */ static __init int early_put_chars(u32 vtermno, const char *buf, int count) { char scratch[17]; unsigned int len = count; - /* We use a nul-terminated string, so we have to make a copy. Icky, - * huh? */ + /* We use a nul-terminated string, so we make a copy. Icky, huh? */ if (len > sizeof(scratch) - 1) len = sizeof(scratch) - 1; scratch[len] = '\0'; @@ -1021,8 +1118,10 @@ static __init int early_put_chars(u32 vtermno, const char *buf, int count) return len; } -/* Rebooting also tells the Host we're finished, but the RESTART flag tells the - * Launcher to reboot us. */ +/* + * Rebooting also tells the Host we're finished, but the RESTART flag tells the + * Launcher to reboot us. + */ static void lguest_restart(char *reason) { kvm_hypercall2(LHCALL_SHUTDOWN, __pa(reason), LGUEST_SHUTDOWN_RESTART); @@ -1049,7 +1148,8 @@ static void lguest_restart(char *reason) * fit comfortably. * * First we need assembly templates of each of the patchable Guest operations, - * and these are in i386_head.S. */ + * and these are in i386_head.S. + */ /*G:060 We construct a table from the assembler templates: */ static const struct lguest_insns @@ -1060,9 +1160,11 @@ static const struct lguest_insns [PARAVIRT_PATCH(pv_irq_ops.save_fl)] = { lgstart_pushf, lgend_pushf }, }; -/* Now our patch routine is fairly simple (based on the native one in +/* + * Now our patch routine is fairly simple (based on the native one in * paravirt.c). If we have a replacement, we copy it in and return how much of - * the available space we used. */ + * the available space we used. + */ static unsigned lguest_patch(u8 type, u16 clobber, void *ibuf, unsigned long addr, unsigned len) { @@ -1074,8 +1176,7 @@ static unsigned lguest_patch(u8 type, u16 clobber, void *ibuf, insn_len = lguest_insns[type].end - lguest_insns[type].start; - /* Similarly if we can't fit replacement (shouldn't happen, but let's - * be thorough). */ + /* Similarly if it can't fit (doesn't happen, but let's be thorough). */ if (len < insn_len) return paravirt_patch_default(type, clobber, ibuf, addr, len); @@ -1084,22 +1185,28 @@ static unsigned lguest_patch(u8 type, u16 clobber, void *ibuf, return insn_len; } -/*G:029 Once we get to lguest_init(), we know we're a Guest. The various +/*G:029 + * Once we get to lguest_init(), we know we're a Guest. The various * pv_ops structures in the kernel provide points for (almost) every routine we - * have to override to avoid privileged instructions. */ + * have to override to avoid privileged instructions. + */ __init void lguest_init(void) { - /* We're under lguest, paravirt is enabled, and we're running at - * privilege level 1, not 0 as normal. */ + /* We're under lguest. */ pv_info.name = "lguest"; + /* Paravirt is enabled. */ pv_info.paravirt_enabled = 1; + /* We're running at privilege level 1, not 0 as normal. */ pv_info.kernel_rpl = 1; + /* Everyone except Xen runs with this set. */ pv_info.shared_kernel_pmd = 1; - /* We set up all the lguest overrides for sensitive operations. These - * are detailed with the operations themselves. */ + /* + * We set up all the lguest overrides for sensitive operations. These + * are detailed with the operations themselves. + */ - /* interrupt-related operations */ + /* Interrupt-related operations */ pv_irq_ops.init_IRQ = lguest_init_IRQ; pv_irq_ops.save_fl = PV_CALLEE_SAVE(save_fl); pv_irq_ops.restore_fl = __PV_IS_CALLEE_SAVE(lg_restore_fl); @@ -1107,11 +1214,11 @@ __init void lguest_init(void) pv_irq_ops.irq_enable = __PV_IS_CALLEE_SAVE(lg_irq_enable); pv_irq_ops.safe_halt = lguest_safe_halt; - /* init-time operations */ + /* Setup operations */ pv_init_ops.memory_setup = lguest_memory_setup; pv_init_ops.patch = lguest_patch; - /* Intercepts of various cpu instructions */ + /* Intercepts of various CPU instructions */ pv_cpu_ops.load_gdt = lguest_load_gdt; pv_cpu_ops.cpuid = lguest_cpuid; pv_cpu_ops.load_idt = lguest_load_idt; @@ -1132,7 +1239,7 @@ __init void lguest_init(void) pv_cpu_ops.start_context_switch = paravirt_start_context_switch; pv_cpu_ops.end_context_switch = lguest_end_context_switch; - /* pagetable management */ + /* Pagetable management */ pv_mmu_ops.write_cr3 = lguest_write_cr3; pv_mmu_ops.flush_tlb_user = lguest_flush_tlb_user; pv_mmu_ops.flush_tlb_single = lguest_flush_tlb_single; @@ -1154,54 +1261,71 @@ __init void lguest_init(void) pv_mmu_ops.pte_update_defer = lguest_pte_update; #ifdef CONFIG_X86_LOCAL_APIC - /* apic read/write intercepts */ + /* APIC read/write intercepts */ set_lguest_basic_apic_ops(); #endif - /* time operations */ + /* Time operations */ pv_time_ops.get_wallclock = lguest_get_wallclock; pv_time_ops.time_init = lguest_time_init; pv_time_ops.get_tsc_khz = lguest_tsc_khz; - /* Now is a good time to look at the implementations of these functions - * before returning to the rest of lguest_init(). */ + /* + * Now is a good time to look at the implementations of these functions + * before returning to the rest of lguest_init(). + */ - /*G:070 Now we've seen all the paravirt_ops, we return to + /*G:070 + * Now we've seen all the paravirt_ops, we return to * lguest_init() where the rest of the fairly chaotic boot setup - * occurs. */ + * occurs. + */ - /* The stack protector is a weird thing where gcc places a canary + /* + * The stack protector is a weird thing where gcc places a canary * value on the stack and then checks it on return. This file is * compiled with -fno-stack-protector it, so we got this far without * problems. The value of the canary is kept at offset 20 from the * %gs register, so we need to set that up before calling C functions - * in other files. */ + * in other files. + */ setup_stack_canary_segment(0); - /* We could just call load_stack_canary_segment(), but we might as - * call switch_to_new_gdt() which loads the whole table and sets up - * the per-cpu segment descriptor register %fs as well. */ + + /* + * We could just call load_stack_canary_segment(), but we might as well + * call switch_to_new_gdt() which loads the whole table and sets up the + * per-cpu segment descriptor register %fs as well. + */ switch_to_new_gdt(0); /* As described in head_32.S, we map the first 128M of memory. */ max_pfn_mapped = (128*1024*1024) >> PAGE_SHIFT; - /* The Host<->Guest Switcher lives at the top of our address space, and + /* + * The Host<->Guest Switcher lives at the top of our address space, and * the Host told us how big it is when we made LGUEST_INIT hypercall: - * it put the answer in lguest_data.reserve_mem */ + * it put the answer in lguest_data.reserve_mem + */ reserve_top_address(lguest_data.reserve_mem); - /* If we don't initialize the lock dependency checker now, it crashes - * paravirt_disable_iospace. */ + /* + * If we don't initialize the lock dependency checker now, it crashes + * paravirt_disable_iospace. + */ lockdep_init(); - /* The IDE code spends about 3 seconds probing for disks: if we reserve + /* + * The IDE code spends about 3 seconds probing for disks: if we reserve * all the I/O ports up front it can't get them and so doesn't probe. * Other device drivers are similar (but less severe). This cuts the - * kernel boot time on my machine from 4.1 seconds to 0.45 seconds. */ + * kernel boot time on my machine from 4.1 seconds to 0.45 seconds. + */ paravirt_disable_iospace(); - /* This is messy CPU setup stuff which the native boot code does before - * start_kernel, so we have to do, too: */ + /* + * This is messy CPU setup stuff which the native boot code does before + * start_kernel, so we have to do, too: + */ cpu_detect(&new_cpu_data); /* head.S usually sets up the first capability word, so do it here. */ new_cpu_data.x86_capability[0] = cpuid_edx(1); @@ -1218,22 +1342,28 @@ __init void lguest_init(void) acpi_ht = 0; #endif - /* We set the preferred console to "hvc". This is the "hypervisor + /* + * We set the preferred console to "hvc". This is the "hypervisor * virtual console" driver written by the PowerPC people, which we also - * adapted for lguest's use. */ + * adapted for lguest's use. + */ add_preferred_console("hvc", 0, NULL); /* Register our very early console. */ virtio_cons_early_init(early_put_chars); - /* Last of all, we set the power management poweroff hook to point to + /* + * Last of all, we set the power management poweroff hook to point to * the Guest routine to power off, and the reboot hook to our restart - * routine. */ + * routine. + */ pm_power_off = lguest_power_off; machine_ops.restart = lguest_restart; - /* Now we're set up, call i386_start_kernel() in head32.c and we proceed - * to boot as normal. It never returns. */ + /* + * Now we're set up, call i386_start_kernel() in head32.c and we proceed + * to boot as normal. It never returns. + */ i386_start_kernel(); } /* diff --git a/arch/x86/lguest/i386_head.S b/arch/x86/lguest/i386_head.S index a9c8cfe61cd..db6aa95eb05 100644 --- a/arch/x86/lguest/i386_head.S +++ b/arch/x86/lguest/i386_head.S @@ -5,7 +5,8 @@ #include #include -/*G:020 Our story starts with the kernel booting into startup_32 in +/*G:020 + * Our story starts with the kernel booting into startup_32 in * arch/x86/kernel/head_32.S. It expects a boot header, which is created by * the bootloader (the Launcher in our case). * @@ -21,11 +22,14 @@ * data without remembering to subtract __PAGE_OFFSET! * * The .section line puts this code in .init.text so it will be discarded after - * boot. */ + * boot. + */ .section .init.text, "ax", @progbits ENTRY(lguest_entry) - /* We make the "initialization" hypercall now to tell the Host about - * us, and also find out where it put our page tables. */ + /* + * We make the "initialization" hypercall now to tell the Host about + * us, and also find out where it put our page tables. + */ movl $LHCALL_LGUEST_INIT, %eax movl $lguest_data - __PAGE_OFFSET, %ebx .byte 0x0f,0x01,0xc1 /* KVM_HYPERCALL */ @@ -33,13 +37,14 @@ ENTRY(lguest_entry) /* Set up the initial stack so we can run C code. */ movl $(init_thread_union+THREAD_SIZE),%esp - /* Jumps are relative, and we're running __PAGE_OFFSET too low at the - * moment. */ + /* Jumps are relative: we're running __PAGE_OFFSET too low. */ jmp lguest_init+__PAGE_OFFSET -/*G:055 We create a macro which puts the assembler code between lgstart_ and - * lgend_ markers. These templates are put in the .text section: they can't be - * discarded after boot as we may need to patch modules, too. */ +/*G:055 + * We create a macro which puts the assembler code between lgstart_ and lgend_ + * markers. These templates are put in the .text section: they can't be + * discarded after boot as we may need to patch modules, too. + */ .text #define LGUEST_PATCH(name, insns...) \ lgstart_##name: insns; lgend_##name:; \ @@ -48,58 +53,74 @@ ENTRY(lguest_entry) LGUEST_PATCH(cli, movl $0, lguest_data+LGUEST_DATA_irq_enabled) LGUEST_PATCH(pushf, movl lguest_data+LGUEST_DATA_irq_enabled, %eax) -/*G:033 But using those wrappers is inefficient (we'll see why that doesn't - * matter for save_fl and irq_disable later). If we write our routines - * carefully in assembler, we can avoid clobbering any registers and avoid - * jumping through the wrapper functions. +/*G:033 + * But using those wrappers is inefficient (we'll see why that doesn't matter + * for save_fl and irq_disable later). If we write our routines carefully in + * assembler, we can avoid clobbering any registers and avoid jumping through + * the wrapper functions. * * I skipped over our first piece of assembler, but this one is worth studying - * in a bit more detail so I'll describe in easy stages. First, the routine - * to enable interrupts: */ + * in a bit more detail so I'll describe in easy stages. First, the routine to + * enable interrupts: + */ ENTRY(lg_irq_enable) - /* The reverse of irq_disable, this sets lguest_data.irq_enabled to - * X86_EFLAGS_IF (ie. "Interrupts enabled"). */ + /* + * The reverse of irq_disable, this sets lguest_data.irq_enabled to + * X86_EFLAGS_IF (ie. "Interrupts enabled"). + */ movl $X86_EFLAGS_IF, lguest_data+LGUEST_DATA_irq_enabled - /* But now we need to check if the Host wants to know: there might have + /* + * But now we need to check if the Host wants to know: there might have * been interrupts waiting to be delivered, in which case it will have * set lguest_data.irq_pending to X86_EFLAGS_IF. If it's not zero, we - * jump to send_interrupts, otherwise we're done. */ + * jump to send_interrupts, otherwise we're done. + */ testl $0, lguest_data+LGUEST_DATA_irq_pending jnz send_interrupts - /* One cool thing about x86 is that you can do many things without using + /* + * One cool thing about x86 is that you can do many things without using * a register. In this case, the normal path hasn't needed to save or - * restore any registers at all! */ + * restore any registers at all! + */ ret send_interrupts: - /* OK, now we need a register: eax is used for the hypercall number, + /* + * OK, now we need a register: eax is used for the hypercall number, * which is LHCALL_SEND_INTERRUPTS. * * We used not to bother with this pending detection at all, which was * much simpler. Sooner or later the Host would realize it had to * send us an interrupt. But that turns out to make performance 7 * times worse on a simple tcp benchmark. So now we do this the hard - * way. */ + * way. + */ pushl %eax movl $LHCALL_SEND_INTERRUPTS, %eax - /* This is a vmcall instruction (same thing that KVM uses). Older + /* + * This is a vmcall instruction (same thing that KVM uses). Older * assembler versions might not know the "vmcall" instruction, so we - * create one manually here. */ + * create one manually here. + */ .byte 0x0f,0x01,0xc1 /* KVM_HYPERCALL */ popl %eax ret -/* Finally, the "popf" or "restore flags" routine. The %eax register holds the +/* + * Finally, the "popf" or "restore flags" routine. The %eax register holds the * flags (in practice, either X86_EFLAGS_IF or 0): if it's X86_EFLAGS_IF we're - * enabling interrupts again, if it's 0 we're leaving them off. */ + * enabling interrupts again, if it's 0 we're leaving them off. + */ ENTRY(lg_restore_fl) /* This is just "lguest_data.irq_enabled = flags;" */ movl %eax, lguest_data+LGUEST_DATA_irq_enabled - /* Now, if the %eax value has enabled interrupts and + /* + * Now, if the %eax value has enabled interrupts and * lguest_data.irq_pending is set, we want to tell the Host so it can * deliver any outstanding interrupts. Fortunately, both values will * be X86_EFLAGS_IF (ie. 512) in that case, and the "testl" * instruction will AND them together for us. If both are set, we - * jump to send_interrupts. */ + * jump to send_interrupts. + */ testl lguest_data+LGUEST_DATA_irq_pending, %eax jnz send_interrupts /* Again, the normal path has used no extra registers. Clever, huh? */ @@ -109,22 +130,24 @@ ENTRY(lg_restore_fl) .global lguest_noirq_start .global lguest_noirq_end -/*M:004 When the Host reflects a trap or injects an interrupt into the Guest, - * it sets the eflags interrupt bit on the stack based on - * lguest_data.irq_enabled, so the Guest iret logic does the right thing when - * restoring it. However, when the Host sets the Guest up for direct traps, - * such as system calls, the processor is the one to push eflags onto the - * stack, and the interrupt bit will be 1 (in reality, interrupts are always - * enabled in the Guest). +/*M:004 + * When the Host reflects a trap or injects an interrupt into the Guest, it + * sets the eflags interrupt bit on the stack based on lguest_data.irq_enabled, + * so the Guest iret logic does the right thing when restoring it. However, + * when the Host sets the Guest up for direct traps, such as system calls, the + * processor is the one to push eflags onto the stack, and the interrupt bit + * will be 1 (in reality, interrupts are always enabled in the Guest). * * This turns out to be harmless: the only trap which should happen under Linux * with interrupts disabled is Page Fault (due to our lazy mapping of vmalloc * regions), which has to be reflected through the Host anyway. If another * trap *does* go off when interrupts are disabled, the Guest will panic, and - * we'll never get to this iret! :*/ + * we'll never get to this iret! +:*/ -/*G:045 There is one final paravirt_op that the Guest implements, and glancing - * at it you can see why I left it to last. It's *cool*! It's in *assembler*! +/*G:045 + * There is one final paravirt_op that the Guest implements, and glancing at it + * you can see why I left it to last. It's *cool*! It's in *assembler*! * * The "iret" instruction is used to return from an interrupt or trap. The * stack looks like this: @@ -148,15 +171,18 @@ ENTRY(lg_restore_fl) * return to userspace or wherever. Our solution to this is to surround the * code with lguest_noirq_start: and lguest_noirq_end: labels. We tell the * Host that it is *never* to interrupt us there, even if interrupts seem to be - * enabled. */ + * enabled. + */ ENTRY(lguest_iret) pushl %eax movl 12(%esp), %eax lguest_noirq_start: - /* Note the %ss: segment prefix here. Normal data accesses use the + /* + * Note the %ss: segment prefix here. Normal data accesses use the * "ds" segment, but that will have already been restored for whatever * we're returning to (such as userspace): we can't trust it. The %ss: - * prefix makes sure we use the stack segment, which is still valid. */ + * prefix makes sure we use the stack segment, which is still valid. + */ movl %eax,%ss:lguest_data+LGUEST_DATA_irq_enabled popl %eax iret diff --git a/drivers/lguest/core.c b/drivers/lguest/core.c index a6974e9b8eb..cd058bc903f 100644 --- a/drivers/lguest/core.c +++ b/drivers/lguest/core.c @@ -1,6 +1,8 @@ -/*P:400 This contains run_guest() which actually calls into the Host<->Guest +/*P:400 + * This contains run_guest() which actually calls into the Host<->Guest * Switcher and analyzes the return, such as determining if the Guest wants the - * Host to do something. This file also contains useful helper routines. :*/ + * Host to do something. This file also contains useful helper routines. +:*/ #include #include #include @@ -24,7 +26,8 @@ static struct page **switcher_page; /* This One Big lock protects all inter-guest data structures. */ DEFINE_MUTEX(lguest_lock); -/*H:010 We need to set up the Switcher at a high virtual address. Remember the +/*H:010 + * We need to set up the Switcher at a high virtual address. Remember the * Switcher is a few hundred bytes of assembler code which actually changes the * CPU to run the Guest, and then changes back to the Host when a trap or * interrupt happens. @@ -33,7 +36,8 @@ DEFINE_MUTEX(lguest_lock); * Host since it will be running as the switchover occurs. * * Trying to map memory at a particular address is an unusual thing to do, so - * it's not a simple one-liner. */ + * it's not a simple one-liner. + */ static __init int map_switcher(void) { int i, err; @@ -47,8 +51,10 @@ static __init int map_switcher(void) * easy. */ - /* We allocate an array of struct page pointers. map_vm_area() wants - * this, rather than just an array of pages. */ + /* + * We allocate an array of struct page pointers. map_vm_area() wants + * this, rather than just an array of pages. + */ switcher_page = kmalloc(sizeof(switcher_page[0])*TOTAL_SWITCHER_PAGES, GFP_KERNEL); if (!switcher_page) { @@ -56,8 +62,10 @@ static __init int map_switcher(void) goto out; } - /* Now we actually allocate the pages. The Guest will see these pages, - * so we make sure they're zeroed. */ + /* + * Now we actually allocate the pages. The Guest will see these pages, + * so we make sure they're zeroed. + */ for (i = 0; i < TOTAL_SWITCHER_PAGES; i++) { unsigned long addr = get_zeroed_page(GFP_KERNEL); if (!addr) { @@ -67,19 +75,23 @@ static __init int map_switcher(void) switcher_page[i] = virt_to_page(addr); } - /* First we check that the Switcher won't overlap the fixmap area at + /* + * First we check that the Switcher won't overlap the fixmap area at * the top of memory. It's currently nowhere near, but it could have - * very strange effects if it ever happened. */ + * very strange effects if it ever happened. + */ if (SWITCHER_ADDR + (TOTAL_SWITCHER_PAGES+1)*PAGE_SIZE > FIXADDR_START){ err = -ENOMEM; printk("lguest: mapping switcher would thwack fixmap\n"); goto free_pages; } - /* Now we reserve the "virtual memory area" we want: 0xFFC00000 + /* + * Now we reserve the "virtual memory area" we want: 0xFFC00000 * (SWITCHER_ADDR). We might not get it in theory, but in practice * it's worked so far. The end address needs +1 because __get_vm_area - * allocates an extra guard page, so we need space for that. */ + * allocates an extra guard page, so we need space for that. + */ switcher_vma = __get_vm_area(TOTAL_SWITCHER_PAGES * PAGE_SIZE, VM_ALLOC, SWITCHER_ADDR, SWITCHER_ADDR + (TOTAL_SWITCHER_PAGES+1) * PAGE_SIZE); @@ -89,11 +101,13 @@ static __init int map_switcher(void) goto free_pages; } - /* This code actually sets up the pages we've allocated to appear at + /* + * This code actually sets up the pages we've allocated to appear at * SWITCHER_ADDR. map_vm_area() takes the vma we allocated above, the * kind of pages we're mapping (kernel pages), and a pointer to our * array of struct pages. It increments that pointer, but we don't - * care. */ + * care. + */ pagep = switcher_page; err = map_vm_area(switcher_vma, PAGE_KERNEL_EXEC, &pagep); if (err) { @@ -101,8 +115,10 @@ static __init int map_switcher(void) goto free_vma; } - /* Now the Switcher is mapped at the right address, we can't fail! - * Copy in the compiled-in Switcher code (from _switcher.S). */ + /* + * Now the Switcher is mapped at the right address, we can't fail! + * Copy in the compiled-in Switcher code (from _switcher.S). + */ memcpy(switcher_vma->addr, start_switcher_text, end_switcher_text - start_switcher_text); @@ -124,8 +140,7 @@ out: } /*:*/ -/* Cleaning up the mapping when the module is unloaded is almost... - * too easy. */ +/* Cleaning up the mapping when the module is unloaded is almost... too easy. */ static void unmap_switcher(void) { unsigned int i; @@ -151,16 +166,19 @@ static void unmap_switcher(void) * But we can't trust the Guest: it might be trying to access the Launcher * code. We have to check that the range is below the pfn_limit the Launcher * gave us. We have to make sure that addr + len doesn't give us a false - * positive by overflowing, too. */ + * positive by overflowing, too. + */ bool lguest_address_ok(const struct lguest *lg, unsigned long addr, unsigned long len) { return (addr+len) / PAGE_SIZE < lg->pfn_limit && (addr+len >= addr); } -/* This routine copies memory from the Guest. Here we can see how useful the +/* + * This routine copies memory from the Guest. Here we can see how useful the * kill_lguest() routine we met in the Launcher can be: we return a random - * value (all zeroes) instead of needing to return an error. */ + * value (all zeroes) instead of needing to return an error. + */ void __lgread(struct lg_cpu *cpu, void *b, unsigned long addr, unsigned bytes) { if (!lguest_address_ok(cpu->lg, addr, bytes) @@ -181,9 +199,11 @@ void __lgwrite(struct lg_cpu *cpu, unsigned long addr, const void *b, } /*:*/ -/*H:030 Let's jump straight to the the main loop which runs the Guest. +/*H:030 + * Let's jump straight to the the main loop which runs the Guest. * Remember, this is called by the Launcher reading /dev/lguest, and we keep - * going around and around until something interesting happens. */ + * going around and around until something interesting happens. + */ int run_guest(struct lg_cpu *cpu, unsigned long __user *user) { /* We stop running once the Guest is dead. */ @@ -195,8 +215,10 @@ int run_guest(struct lg_cpu *cpu, unsigned long __user *user) if (cpu->hcall) do_hypercalls(cpu); - /* It's possible the Guest did a NOTIFY hypercall to the - * Launcher, in which case we return from the read() now. */ + /* + * It's possible the Guest did a NOTIFY hypercall to the + * Launcher, in which case we return from the read() now. + */ if (cpu->pending_notify) { if (!send_notify_to_eventfd(cpu)) { if (put_user(cpu->pending_notify, user)) @@ -209,29 +231,39 @@ int run_guest(struct lg_cpu *cpu, unsigned long __user *user) if (signal_pending(current)) return -ERESTARTSYS; - /* Check if there are any interrupts which can be delivered now: + /* + * Check if there are any interrupts which can be delivered now: * if so, this sets up the hander to be executed when we next - * run the Guest. */ + * run the Guest. + */ irq = interrupt_pending(cpu, &more); if (irq < LGUEST_IRQS) try_deliver_interrupt(cpu, irq, more); - /* All long-lived kernel loops need to check with this horrible + /* + * All long-lived kernel loops need to check with this horrible * thing called the freezer. If the Host is trying to suspend, - * it stops us. */ + * it stops us. + */ try_to_freeze(); - /* Just make absolutely sure the Guest is still alive. One of - * those hypercalls could have been fatal, for example. */ + /* + * Just make absolutely sure the Guest is still alive. One of + * those hypercalls could have been fatal, for example. + */ if (cpu->lg->dead) break; - /* If the Guest asked to be stopped, we sleep. The Guest's - * clock timer will wake us. */ + /* + * If the Guest asked to be stopped, we sleep. The Guest's + * clock timer will wake us. + */ if (cpu->halted) { set_current_state(TASK_INTERRUPTIBLE); - /* Just before we sleep, make sure no interrupt snuck in - * which we should be doing. */ + /* + * Just before we sleep, make sure no interrupt snuck in + * which we should be doing. + */ if (interrupt_pending(cpu, &more) < LGUEST_IRQS) set_current_state(TASK_RUNNING); else @@ -239,8 +271,10 @@ int run_guest(struct lg_cpu *cpu, unsigned long __user *user) continue; } - /* OK, now we're ready to jump into the Guest. First we put up - * the "Do Not Disturb" sign: */ + /* + * OK, now we're ready to jump into the Guest. First we put up + * the "Do Not Disturb" sign: + */ local_irq_disable(); /* Actually run the Guest until something happens. */ @@ -327,8 +361,10 @@ static void __exit fini(void) } /*:*/ -/* The Host side of lguest can be a module. This is a nice way for people to - * play with it. */ +/* + * The Host side of lguest can be a module. This is a nice way for people to + * play with it. + */ module_init(init); module_exit(fini); MODULE_LICENSE("GPL"); diff --git a/drivers/lguest/hypercalls.c b/drivers/lguest/hypercalls.c index c29ffa19cb7..787ab4bc09f 100644 --- a/drivers/lguest/hypercalls.c +++ b/drivers/lguest/hypercalls.c @@ -1,8 +1,10 @@ -/*P:500 Just as userspace programs request kernel operations through a system +/*P:500 + * Just as userspace programs request kernel operations through a system * call, the Guest requests Host operations through a "hypercall". You might * notice this nomenclature doesn't really follow any logic, but the name has * been around for long enough that we're stuck with it. As you'd expect, this - * code is basically a one big switch statement. :*/ + * code is basically a one big switch statement. +:*/ /* Copyright (C) 2006 Rusty Russell IBM Corporation @@ -28,30 +30,41 @@ #include #include "lg.h" -/*H:120 This is the core hypercall routine: where the Guest gets what it wants. - * Or gets killed. Or, in the case of LHCALL_SHUTDOWN, both. */ +/*H:120 + * This is the core hypercall routine: where the Guest gets what it wants. + * Or gets killed. Or, in the case of LHCALL_SHUTDOWN, both. + */ static void do_hcall(struct lg_cpu *cpu, struct hcall_args *args) { switch (args->arg0) { case LHCALL_FLUSH_ASYNC: - /* This call does nothing, except by breaking out of the Guest - * it makes us process all the asynchronous hypercalls. */ + /* + * This call does nothing, except by breaking out of the Guest + * it makes us process all the asynchronous hypercalls. + */ break; case LHCALL_SEND_INTERRUPTS: - /* This call does nothing too, but by breaking out of the Guest - * it makes us process any pending interrupts. */ + /* + * This call does nothing too, but by breaking out of the Guest + * it makes us process any pending interrupts. + */ break; case LHCALL_LGUEST_INIT: - /* You can't get here unless you're already initialized. Don't - * do that. */ + /* + * You can't get here unless you're already initialized. Don't + * do that. + */ kill_guest(cpu, "already have lguest_data"); break; case LHCALL_SHUTDOWN: { - /* Shutdown is such a trivial hypercall that we do it in four - * lines right here. */ char msg[128]; - /* If the lgread fails, it will call kill_guest() itself; the - * kill_guest() with the message will be ignored. */ + /* + * Shutdown is such a trivial hypercall that we do it in four + * lines right here. + * + * If the lgread fails, it will call kill_guest() itself; the + * kill_guest() with the message will be ignored. + */ __lgread(cpu, msg, args->arg1, sizeof(msg)); msg[sizeof(msg)-1] = '\0'; kill_guest(cpu, "CRASH: %s", msg); @@ -60,16 +73,17 @@ static void do_hcall(struct lg_cpu *cpu, struct hcall_args *args) break; } case LHCALL_FLUSH_TLB: - /* FLUSH_TLB comes in two flavors, depending on the - * argument: */ + /* FLUSH_TLB comes in two flavors, depending on the argument: */ if (args->arg1) guest_pagetable_clear_all(cpu); else guest_pagetable_flush_user(cpu); break; - /* All these calls simply pass the arguments through to the right - * routines. */ + /* + * All these calls simply pass the arguments through to the right + * routines. + */ case LHCALL_NEW_PGTABLE: guest_new_pagetable(cpu, args->arg1); break; @@ -112,15 +126,16 @@ static void do_hcall(struct lg_cpu *cpu, struct hcall_args *args) kill_guest(cpu, "Bad hypercall %li\n", args->arg0); } } -/*:*/ -/*H:124 Asynchronous hypercalls are easy: we just look in the array in the +/*H:124 + * Asynchronous hypercalls are easy: we just look in the array in the * Guest's "struct lguest_data" to see if any new ones are marked "ready". * * We are careful to do these in order: obviously we respect the order the * Guest put them in the ring, but we also promise the Guest that they will * happen before any normal hypercall (which is why we check this before - * checking for a normal hcall). */ + * checking for a normal hcall). + */ static void do_async_hcalls(struct lg_cpu *cpu) { unsigned int i; @@ -133,22 +148,28 @@ static void do_async_hcalls(struct lg_cpu *cpu) /* We process "struct lguest_data"s hcalls[] ring once. */ for (i = 0; i < ARRAY_SIZE(st); i++) { struct hcall_args args; - /* We remember where we were up to from last time. This makes + /* + * We remember where we were up to from last time. This makes * sure that the hypercalls are done in the order the Guest - * places them in the ring. */ + * places them in the ring. + */ unsigned int n = cpu->next_hcall; /* 0xFF means there's no call here (yet). */ if (st[n] == 0xFF) break; - /* OK, we have hypercall. Increment the "next_hcall" cursor, - * and wrap back to 0 if we reach the end. */ + /* + * OK, we have hypercall. Increment the "next_hcall" cursor, + * and wrap back to 0 if we reach the end. + */ if (++cpu->next_hcall == LHCALL_RING_SIZE) cpu->next_hcall = 0; - /* Copy the hypercall arguments into a local copy of - * the hcall_args struct. */ + /* + * Copy the hypercall arguments into a local copy of the + * hcall_args struct. + */ if (copy_from_user(&args, &cpu->lg->lguest_data->hcalls[n], sizeof(struct hcall_args))) { kill_guest(cpu, "Fetching async hypercalls"); @@ -164,19 +185,25 @@ static void do_async_hcalls(struct lg_cpu *cpu) break; } - /* Stop doing hypercalls if they want to notify the Launcher: - * it needs to service this first. */ + /* + * Stop doing hypercalls if they want to notify the Launcher: + * it needs to service this first. + */ if (cpu->pending_notify) break; } } -/* Last of all, we look at what happens first of all. The very first time the - * Guest makes a hypercall, we end up here to set things up: */ +/* + * Last of all, we look at what happens first of all. The very first time the + * Guest makes a hypercall, we end up here to set things up: + */ static void initialize(struct lg_cpu *cpu) { - /* You can't do anything until you're initialized. The Guest knows the - * rules, so we're unforgiving here. */ + /* + * You can't do anything until you're initialized. The Guest knows the + * rules, so we're unforgiving here. + */ if (cpu->hcall->arg0 != LHCALL_LGUEST_INIT) { kill_guest(cpu, "hypercall %li before INIT", cpu->hcall->arg0); return; @@ -185,32 +212,40 @@ static void initialize(struct lg_cpu *cpu) if (lguest_arch_init_hypercalls(cpu)) kill_guest(cpu, "bad guest page %p", cpu->lg->lguest_data); - /* The Guest tells us where we're not to deliver interrupts by putting - * the range of addresses into "struct lguest_data". */ + /* + * The Guest tells us where we're not to deliver interrupts by putting + * the range of addresses into "struct lguest_data". + */ if (get_user(cpu->lg->noirq_start, &cpu->lg->lguest_data->noirq_start) || get_user(cpu->lg->noirq_end, &cpu->lg->lguest_data->noirq_end)) kill_guest(cpu, "bad guest page %p", cpu->lg->lguest_data); - /* We write the current time into the Guest's data page once so it can - * set its clock. */ + /* + * We write the current time into the Guest's data page once so it can + * set its clock. + */ write_timestamp(cpu); /* page_tables.c will also do some setup. */ page_table_guest_data_init(cpu); - /* This is the one case where the above accesses might have been the + /* + * This is the one case where the above accesses might have been the * first write to a Guest page. This may have caused a copy-on-write * fault, but the old page might be (read-only) in the Guest - * pagetable. */ + * pagetable. + */ guest_pagetable_clear_all(cpu); } /*:*/ -/*M:013 If a Guest reads from a page (so creates a mapping) that it has never +/*M:013 + * If a Guest reads from a page (so creates a mapping) that it has never * written to, and then the Launcher writes to it (ie. the output of a virtual * device), the Guest will still see the old page. In practice, this never * happens: why would the Guest read a page which it has never written to? But - * a similar scenario might one day bite us, so it's worth mentioning. :*/ + * a similar scenario might one day bite us, so it's worth mentioning. +:*/ /*H:100 * Hypercalls @@ -229,17 +264,22 @@ void do_hypercalls(struct lg_cpu *cpu) return; } - /* The Guest has initialized. + /* + * The Guest has initialized. * - * Look in the hypercall ring for the async hypercalls: */ + * Look in the hypercall ring for the async hypercalls: + */ do_async_hcalls(cpu); - /* If we stopped reading the hypercall ring because the Guest did a + /* + * If we stopped reading the hypercall ring because the Guest did a * NOTIFY to the Launcher, we want to return now. Otherwise we do - * the hypercall. */ + * the hypercall. + */ if (!cpu->pending_notify) { do_hcall(cpu, cpu->hcall); - /* Tricky point: we reset the hcall pointer to mark the + /* + * Tricky point: we reset the hcall pointer to mark the * hypercall as "done". We use the hcall pointer rather than * the trap number to indicate a hypercall is pending. * Normally it doesn't matter: the Guest will run again and @@ -248,13 +288,16 @@ void do_hypercalls(struct lg_cpu *cpu) * However, if we are signalled or the Guest sends I/O to the * Launcher, the run_guest() loop will exit without running the * Guest. When it comes back it would try to re-run the - * hypercall. Finding that bug sucked. */ + * hypercall. Finding that bug sucked. + */ cpu->hcall = NULL; } } -/* This routine supplies the Guest with time: it's used for wallclock time at - * initial boot and as a rough time source if the TSC isn't available. */ +/* + * This routine supplies the Guest with time: it's used for wallclock time at + * initial boot and as a rough time source if the TSC isn't available. + */ void write_timestamp(struct lg_cpu *cpu) { struct timespec now; diff --git a/drivers/lguest/interrupts_and_traps.c b/drivers/lguest/interrupts_and_traps.c index 0e9067b0d50..18648180db0 100644 --- a/drivers/lguest/interrupts_and_traps.c +++ b/drivers/lguest/interrupts_and_traps.c @@ -1,4 +1,5 @@ -/*P:800 Interrupts (traps) are complicated enough to earn their own file. +/*P:800 + * Interrupts (traps) are complicated enough to earn their own file. * There are three classes of interrupts: * * 1) Real hardware interrupts which occur while we're running the Guest, @@ -10,7 +11,8 @@ * just like real hardware would deliver them. Traps from the Guest can be set * up to go directly back into the Guest, but sometimes the Host wants to see * them first, so we also have a way of "reflecting" them into the Guest as if - * they had been delivered to it directly. :*/ + * they had been delivered to it directly. +:*/ #include #include #include @@ -26,8 +28,10 @@ static unsigned long idt_address(u32 lo, u32 hi) return (lo & 0x0000FFFF) | (hi & 0xFFFF0000); } -/* The "type" of the interrupt handler is a 4 bit field: we only support a - * couple of types. */ +/* + * The "type" of the interrupt handler is a 4 bit field: we only support a + * couple of types. + */ static int idt_type(u32 lo, u32 hi) { return (hi >> 8) & 0xF; @@ -39,8 +43,10 @@ static bool idt_present(u32 lo, u32 hi) return (hi & 0x8000); } -/* We need a helper to "push" a value onto the Guest's stack, since that's a - * big part of what delivering an interrupt does. */ +/* + * We need a helper to "push" a value onto the Guest's stack, since that's a + * big part of what delivering an interrupt does. + */ static void push_guest_stack(struct lg_cpu *cpu, unsigned long *gstack, u32 val) { /* Stack grows upwards: move stack then write value. */ @@ -48,7 +54,8 @@ static void push_guest_stack(struct lg_cpu *cpu, unsigned long *gstack, u32 val) lgwrite(cpu, *gstack, u32, val); } -/*H:210 The set_guest_interrupt() routine actually delivers the interrupt or +/*H:210 + * The set_guest_interrupt() routine actually delivers the interrupt or * trap. The mechanics of delivering traps and interrupts to the Guest are the * same, except some traps have an "error code" which gets pushed onto the * stack as well: the caller tells us if this is one. @@ -59,7 +66,8 @@ static void push_guest_stack(struct lg_cpu *cpu, unsigned long *gstack, u32 val) * * We set up the stack just like the CPU does for a real interrupt, so it's * identical for the Guest (and the standard "iret" instruction will undo - * it). */ + * it). + */ static void set_guest_interrupt(struct lg_cpu *cpu, u32 lo, u32 hi, bool has_err) { @@ -67,20 +75,26 @@ static void set_guest_interrupt(struct lg_cpu *cpu, u32 lo, u32 hi, u32 eflags, ss, irq_enable; unsigned long virtstack; - /* There are two cases for interrupts: one where the Guest is already + /* + * There are two cases for interrupts: one where the Guest is already * in the kernel, and a more complex one where the Guest is in - * userspace. We check the privilege level to find out. */ + * userspace. We check the privilege level to find out. + */ if ((cpu->regs->ss&0x3) != GUEST_PL) { - /* The Guest told us their kernel stack with the SET_STACK - * hypercall: both the virtual address and the segment */ + /* + * The Guest told us their kernel stack with the SET_STACK + * hypercall: both the virtual address and the segment. + */ virtstack = cpu->esp1; ss = cpu->ss1; origstack = gstack = guest_pa(cpu, virtstack); - /* We push the old stack segment and pointer onto the new + /* + * We push the old stack segment and pointer onto the new * stack: when the Guest does an "iret" back from the interrupt * handler the CPU will notice they're dropping privilege - * levels and expect these here. */ + * levels and expect these here. + */ push_guest_stack(cpu, &gstack, cpu->regs->ss); push_guest_stack(cpu, &gstack, cpu->regs->esp); } else { @@ -91,18 +105,22 @@ static void set_guest_interrupt(struct lg_cpu *cpu, u32 lo, u32 hi, origstack = gstack = guest_pa(cpu, virtstack); } - /* Remember that we never let the Guest actually disable interrupts, so + /* + * Remember that we never let the Guest actually disable interrupts, so * the "Interrupt Flag" bit is always set. We copy that bit from the * Guest's "irq_enabled" field into the eflags word: we saw the Guest - * copy it back in "lguest_iret". */ + * copy it back in "lguest_iret". + */ eflags = cpu->regs->eflags; if (get_user(irq_enable, &cpu->lg->lguest_data->irq_enabled) == 0 && !(irq_enable & X86_EFLAGS_IF)) eflags &= ~X86_EFLAGS_IF; - /* An interrupt is expected to push three things on the stack: the old + /* + * An interrupt is expected to push three things on the stack: the old * "eflags" word, the old code segment, and the old instruction - * pointer. */ + * pointer. + */ push_guest_stack(cpu, &gstack, eflags); push_guest_stack(cpu, &gstack, cpu->regs->cs); push_guest_stack(cpu, &gstack, cpu->regs->eip); @@ -111,15 +129,19 @@ static void set_guest_interrupt(struct lg_cpu *cpu, u32 lo, u32 hi, if (has_err) push_guest_stack(cpu, &gstack, cpu->regs->errcode); - /* Now we've pushed all the old state, we change the stack, the code - * segment and the address to execute. */ + /* + * Now we've pushed all the old state, we change the stack, the code + * segment and the address to execute. + */ cpu->regs->ss = ss; cpu->regs->esp = virtstack + (gstack - origstack); cpu->regs->cs = (__KERNEL_CS|GUEST_PL); cpu->regs->eip = idt_address(lo, hi); - /* There are two kinds of interrupt handlers: 0xE is an "interrupt - * gate" which expects interrupts to be disabled on entry. */ + /* + * There are two kinds of interrupt handlers: 0xE is an "interrupt + * gate" which expects interrupts to be disabled on entry. + */ if (idt_type(lo, hi) == 0xE) if (put_user(0, &cpu->lg->lguest_data->irq_enabled)) kill_guest(cpu, "Disabling interrupts"); @@ -130,7 +152,8 @@ static void set_guest_interrupt(struct lg_cpu *cpu, u32 lo, u32 hi, * * interrupt_pending() returns the first pending interrupt which isn't blocked * by the Guest. It is called before every entry to the Guest, and just before - * we go to sleep when the Guest has halted itself. */ + * we go to sleep when the Guest has halted itself. + */ unsigned int interrupt_pending(struct lg_cpu *cpu, bool *more) { unsigned int irq; @@ -140,8 +163,10 @@ unsigned int interrupt_pending(struct lg_cpu *cpu, bool *more) if (!cpu->lg->lguest_data) return LGUEST_IRQS; - /* Take our "irqs_pending" array and remove any interrupts the Guest - * wants blocked: the result ends up in "blk". */ + /* + * Take our "irqs_pending" array and remove any interrupts the Guest + * wants blocked: the result ends up in "blk". + */ if (copy_from_user(&blk, cpu->lg->lguest_data->blocked_interrupts, sizeof(blk))) return LGUEST_IRQS; @@ -154,16 +179,20 @@ unsigned int interrupt_pending(struct lg_cpu *cpu, bool *more) return irq; } -/* This actually diverts the Guest to running an interrupt handler, once an - * interrupt has been identified by interrupt_pending(). */ +/* + * This actually diverts the Guest to running an interrupt handler, once an + * interrupt has been identified by interrupt_pending(). + */ void try_deliver_interrupt(struct lg_cpu *cpu, unsigned int irq, bool more) { struct desc_struct *idt; BUG_ON(irq >= LGUEST_IRQS); - /* They may be in the middle of an iret, where they asked us never to - * deliver interrupts. */ + /* + * They may be in the middle of an iret, where they asked us never to + * deliver interrupts. + */ if (cpu->regs->eip >= cpu->lg->noirq_start && (cpu->regs->eip < cpu->lg->noirq_end)) return; @@ -187,29 +216,37 @@ void try_deliver_interrupt(struct lg_cpu *cpu, unsigned int irq, bool more) } } - /* Look at the IDT entry the Guest gave us for this interrupt. The + /* + * Look at the IDT entry the Guest gave us for this interrupt. The * first 32 (FIRST_EXTERNAL_VECTOR) entries are for traps, so we skip - * over them. */ + * over them. + */ idt = &cpu->arch.idt[FIRST_EXTERNAL_VECTOR+irq]; /* If they don't have a handler (yet?), we just ignore it */ if (idt_present(idt->a, idt->b)) { /* OK, mark it no longer pending and deliver it. */ clear_bit(irq, cpu->irqs_pending); - /* set_guest_interrupt() takes the interrupt descriptor and a + /* + * set_guest_interrupt() takes the interrupt descriptor and a * flag to say whether this interrupt pushes an error code onto - * the stack as well: virtual interrupts never do. */ + * the stack as well: virtual interrupts never do. + */ set_guest_interrupt(cpu, idt->a, idt->b, false); } - /* Every time we deliver an interrupt, we update the timestamp in the + /* + * Every time we deliver an interrupt, we update the timestamp in the * Guest's lguest_data struct. It would be better for the Guest if we * did this more often, but it can actually be quite slow: doing it * here is a compromise which means at least it gets updated every - * timer interrupt. */ + * timer interrupt. + */ write_timestamp(cpu); - /* If there are no other interrupts we want to deliver, clear - * the pending flag. */ + /* + * If there are no other interrupts we want to deliver, clear + * the pending flag. + */ if (!more) put_user(0, &cpu->lg->lguest_data->irq_pending); } @@ -217,24 +254,29 @@ void try_deliver_interrupt(struct lg_cpu *cpu, unsigned int irq, bool more) /* And this is the routine when we want to set an interrupt for the Guest. */ void set_interrupt(struct lg_cpu *cpu, unsigned int irq) { - /* Next time the Guest runs, the core code will see if it can deliver - * this interrupt. */ + /* + * Next time the Guest runs, the core code will see if it can deliver + * this interrupt. + */ set_bit(irq, cpu->irqs_pending); - /* Make sure it sees it; it might be asleep (eg. halted), or - * running the Guest right now, in which case kick_process() - * will knock it out. */ + /* + * Make sure it sees it; it might be asleep (eg. halted), or running + * the Guest right now, in which case kick_process() will knock it out. + */ if (!wake_up_process(cpu->tsk)) kick_process(cpu->tsk); } /*:*/ -/* Linux uses trap 128 for system calls. Plan9 uses 64, and Ron Minnich sent +/* + * Linux uses trap 128 for system calls. Plan9 uses 64, and Ron Minnich sent * me a patch, so we support that too. It'd be a big step for lguest if half * the Plan 9 user base were to start using it. * * Actually now I think of it, it's possible that Ron *is* half the Plan 9 - * userbase. Oh well. */ + * userbase. Oh well. + */ static bool could_be_syscall(unsigned int num) { /* Normal Linux SYSCALL_VECTOR or reserved vector? */ @@ -274,9 +316,11 @@ void free_interrupts(void) clear_bit(syscall_vector, used_vectors); } -/*H:220 Now we've got the routines to deliver interrupts, delivering traps like +/*H:220 + * Now we've got the routines to deliver interrupts, delivering traps like * page fault is easy. The only trick is that Intel decided that some traps - * should have error codes: */ + * should have error codes: + */ static bool has_err(unsigned int trap) { return (trap == 8 || (trap >= 10 && trap <= 14) || trap == 17); @@ -285,13 +329,17 @@ static bool has_err(unsigned int trap) /* deliver_trap() returns true if it could deliver the trap. */ bool deliver_trap(struct lg_cpu *cpu, unsigned int num) { - /* Trap numbers are always 8 bit, but we set an impossible trap number - * for traps inside the Switcher, so check that here. */ + /* + * Trap numbers are always 8 bit, but we set an impossible trap number + * for traps inside the Switcher, so check that here. + */ if (num >= ARRAY_SIZE(cpu->arch.idt)) return false; - /* Early on the Guest hasn't set the IDT entries (or maybe it put a - * bogus one in): if we fail here, the Guest will be killed. */ + /* + * Early on the Guest hasn't set the IDT entries (or maybe it put a + * bogus one in): if we fail here, the Guest will be killed. + */ if (!idt_present(cpu->arch.idt[num].a, cpu->arch.idt[num].b)) return false; set_guest_interrupt(cpu, cpu->arch.idt[num].a, @@ -299,7 +347,8 @@ bool deliver_trap(struct lg_cpu *cpu, unsigned int num) return true; } -/*H:250 Here's the hard part: returning to the Host every time a trap happens +/*H:250 + * Here's the hard part: returning to the Host every time a trap happens * and then calling deliver_trap() and re-entering the Guest is slow. * Particularly because Guest userspace system calls are traps (usually trap * 128). @@ -311,69 +360,87 @@ bool deliver_trap(struct lg_cpu *cpu, unsigned int num) * the other hypervisors would beat it up at lunchtime. * * This routine indicates if a particular trap number could be delivered - * directly. */ + * directly. + */ static bool direct_trap(unsigned int num) { - /* Hardware interrupts don't go to the Guest at all (except system - * call). */ + /* + * Hardware interrupts don't go to the Guest at all (except system + * call). + */ if (num >= FIRST_EXTERNAL_VECTOR && !could_be_syscall(num)) return false; - /* The Host needs to see page faults (for shadow paging and to save the + /* + * The Host needs to see page faults (for shadow paging and to save the * fault address), general protection faults (in/out emulation) and * device not available (TS handling), invalid opcode fault (kvm hcall), - * and of course, the hypercall trap. */ + * and of course, the hypercall trap. + */ return num != 14 && num != 13 && num != 7 && num != 6 && num != LGUEST_TRAP_ENTRY; } /*:*/ -/*M:005 The Guest has the ability to turn its interrupt gates into trap gates, +/*M:005 + * The Guest has the ability to turn its interrupt gates into trap gates, * if it is careful. The Host will let trap gates can go directly to the * Guest, but the Guest needs the interrupts atomically disabled for an * interrupt gate. It can do this by pointing the trap gate at instructions - * within noirq_start and noirq_end, where it can safely disable interrupts. */ + * within noirq_start and noirq_end, where it can safely disable interrupts. + */ -/*M:006 The Guests do not use the sysenter (fast system call) instruction, +/*M:006 + * The Guests do not use the sysenter (fast system call) instruction, * because it's hardcoded to enter privilege level 0 and so can't go direct. * It's about twice as fast as the older "int 0x80" system call, so it might * still be worthwhile to handle it in the Switcher and lcall down to the * Guest. The sysenter semantics are hairy tho: search for that keyword in - * entry.S :*/ + * entry.S +:*/ -/*H:260 When we make traps go directly into the Guest, we need to make sure +/*H:260 + * When we make traps go directly into the Guest, we need to make sure * the kernel stack is valid (ie. mapped in the page tables). Otherwise, the * CPU trying to deliver the trap will fault while trying to push the interrupt * words on the stack: this is called a double fault, and it forces us to kill * the Guest. * - * Which is deeply unfair, because (literally!) it wasn't the Guests' fault. */ + * Which is deeply unfair, because (literally!) it wasn't the Guests' fault. + */ void pin_stack_pages(struct lg_cpu *cpu) { unsigned int i; - /* Depending on the CONFIG_4KSTACKS option, the Guest can have one or - * two pages of stack space. */ + /* + * Depending on the CONFIG_4KSTACKS option, the Guest can have one or + * two pages of stack space. + */ for (i = 0; i < cpu->lg->stack_pages; i++) - /* The stack grows *upwards*, so the address we're given is the + /* + * The stack grows *upwards*, so the address we're given is the * start of the page after the kernel stack. Subtract one to * get back onto the first stack page, and keep subtracting to - * get to the rest of the stack pages. */ + * get to the rest of the stack pages. + */ pin_page(cpu, cpu->esp1 - 1 - i * PAGE_SIZE); } -/* Direct traps also mean that we need to know whenever the Guest wants to use +/* + * Direct traps also mean that we need to know whenever the Guest wants to use * a different kernel stack, so we can change the IDT entries to use that * stack. The IDT entries expect a virtual address, so unlike most addresses * the Guest gives us, the "esp" (stack pointer) value here is virtual, not * physical. * * In Linux each process has its own kernel stack, so this happens a lot: we - * change stacks on each context switch. */ + * change stacks on each context switch. + */ void guest_set_stack(struct lg_cpu *cpu, u32 seg, u32 esp, unsigned int pages) { - /* You are not allowed have a stack segment with privilege level 0: bad - * Guest! */ + /* + * You're not allowed a stack segment with privilege level 0: bad Guest! + */ if ((seg & 0x3) != GUEST_PL) kill_guest(cpu, "bad stack segment %i", seg); /* We only expect one or two stack pages. */ @@ -387,11 +454,15 @@ void guest_set_stack(struct lg_cpu *cpu, u32 seg, u32 esp, unsigned int pages) pin_stack_pages(cpu); } -/* All this reference to mapping stacks leads us neatly into the other complex - * part of the Host: page table handling. */ +/* + * All this reference to mapping stacks leads us neatly into the other complex + * part of the Host: page table handling. + */ -/*H:235 This is the routine which actually checks the Guest's IDT entry and - * transfers it into the entry in "struct lguest": */ +/*H:235 + * This is the routine which actually checks the Guest's IDT entry and + * transfers it into the entry in "struct lguest": + */ static void set_trap(struct lg_cpu *cpu, struct desc_struct *trap, unsigned int num, u32 lo, u32 hi) { @@ -407,30 +478,38 @@ static void set_trap(struct lg_cpu *cpu, struct desc_struct *trap, if (type != 0xE && type != 0xF) kill_guest(cpu, "bad IDT type %i", type); - /* We only copy the handler address, present bit, privilege level and + /* + * We only copy the handler address, present bit, privilege level and * type. The privilege level controls where the trap can be triggered * manually with an "int" instruction. This is usually GUEST_PL, - * except for system calls which userspace can use. */ + * except for system calls which userspace can use. + */ trap->a = ((__KERNEL_CS|GUEST_PL)<<16) | (lo&0x0000FFFF); trap->b = (hi&0xFFFFEF00); } -/*H:230 While we're here, dealing with delivering traps and interrupts to the +/*H:230 + * While we're here, dealing with delivering traps and interrupts to the * Guest, we might as well complete the picture: how the Guest tells us where * it wants them to go. This would be simple, except making traps fast * requires some tricks. * * We saw the Guest setting Interrupt Descriptor Table (IDT) entries with the - * LHCALL_LOAD_IDT_ENTRY hypercall before: that comes here. */ + * LHCALL_LOAD_IDT_ENTRY hypercall before: that comes here. + */ void load_guest_idt_entry(struct lg_cpu *cpu, unsigned int num, u32 lo, u32 hi) { - /* Guest never handles: NMI, doublefault, spurious interrupt or - * hypercall. We ignore when it tries to set them. */ + /* + * Guest never handles: NMI, doublefault, spurious interrupt or + * hypercall. We ignore when it tries to set them. + */ if (num == 2 || num == 8 || num == 15 || num == LGUEST_TRAP_ENTRY) return; - /* Mark the IDT as changed: next time the Guest runs we'll know we have - * to copy this again. */ + /* + * Mark the IDT as changed: next time the Guest runs we'll know we have + * to copy this again. + */ cpu->changed |= CHANGED_IDT; /* Check that the Guest doesn't try to step outside the bounds. */ @@ -440,9 +519,11 @@ void load_guest_idt_entry(struct lg_cpu *cpu, unsigned int num, u32 lo, u32 hi) set_trap(cpu, &cpu->arch.idt[num], num, lo, hi); } -/* The default entry for each interrupt points into the Switcher routines which +/* + * The default entry for each interrupt points into the Switcher routines which * simply return to the Host. The run_guest() loop will then call - * deliver_trap() to bounce it back into the Guest. */ + * deliver_trap() to bounce it back into the Guest. + */ static void default_idt_entry(struct desc_struct *idt, int trap, const unsigned long handler, @@ -451,13 +532,17 @@ static void default_idt_entry(struct desc_struct *idt, /* A present interrupt gate. */ u32 flags = 0x8e00; - /* Set the privilege level on the entry for the hypercall: this allows - * the Guest to use the "int" instruction to trigger it. */ + /* + * Set the privilege level on the entry for the hypercall: this allows + * the Guest to use the "int" instruction to trigger it. + */ if (trap == LGUEST_TRAP_ENTRY) flags |= (GUEST_PL << 13); else if (base) - /* Copy priv. level from what Guest asked for. This allows - * debug (int 3) traps from Guest userspace, for example. */ + /* + * Copy privilege level from what Guest asked for. This allows + * debug (int 3) traps from Guest userspace, for example. + */ flags |= (base->b & 0x6000); /* Now pack it into the IDT entry in its weird format. */ @@ -475,16 +560,20 @@ void setup_default_idt_entries(struct lguest_ro_state *state, default_idt_entry(&state->guest_idt[i], i, def[i], NULL); } -/*H:240 We don't use the IDT entries in the "struct lguest" directly, instead +/*H:240 + * We don't use the IDT entries in the "struct lguest" directly, instead * we copy them into the IDT which we've set up for Guests on this CPU, just - * before we run the Guest. This routine does that copy. */ + * before we run the Guest. This routine does that copy. + */ void copy_traps(const struct lg_cpu *cpu, struct desc_struct *idt, const unsigned long *def) { unsigned int i; - /* We can simply copy the direct traps, otherwise we use the default - * ones in the Switcher: they will return to the Host. */ + /* + * We can simply copy the direct traps, otherwise we use the default + * ones in the Switcher: they will return to the Host. + */ for (i = 0; i < ARRAY_SIZE(cpu->arch.idt); i++) { const struct desc_struct *gidt = &cpu->arch.idt[i]; @@ -492,14 +581,16 @@ void copy_traps(const struct lg_cpu *cpu, struct desc_struct *idt, if (!direct_trap(i)) continue; - /* Only trap gates (type 15) can go direct to the Guest. + /* + * Only trap gates (type 15) can go direct to the Guest. * Interrupt gates (type 14) disable interrupts as they are * entered, which we never let the Guest do. Not present * entries (type 0x0) also can't go direct, of course. * * If it can't go direct, we still need to copy the priv. level: * they might want to give userspace access to a software - * interrupt. */ + * interrupt. + */ if (idt_type(gidt->a, gidt->b) == 0xF) idt[i] = *gidt; else @@ -518,7 +609,8 @@ void copy_traps(const struct lg_cpu *cpu, struct desc_struct *idt, * the next timer interrupt (in nanoseconds). We use the high-resolution timer * infrastructure to set a callback at that time. * - * 0 means "turn off the clock". */ + * 0 means "turn off the clock". + */ void guest_set_clockevent(struct lg_cpu *cpu, unsigned long delta) { ktime_t expires; @@ -529,9 +621,11 @@ void guest_set_clockevent(struct lg_cpu *cpu, unsigned long delta) return; } - /* We use wallclock time here, so the Guest might not be running for + /* + * We use wallclock time here, so the Guest might not be running for * all the time between now and the timer interrupt it asked for. This - * is almost always the right thing to do. */ + * is almost always the right thing to do. + */ expires = ktime_add_ns(ktime_get_real(), delta); hrtimer_start(&cpu->hrt, expires, HRTIMER_MODE_ABS); } diff --git a/drivers/lguest/lg.h b/drivers/lguest/lg.h index 01c59192379..74c0db691b5 100644 --- a/drivers/lguest/lg.h +++ b/drivers/lguest/lg.h @@ -54,13 +54,13 @@ struct lg_cpu { unsigned long pending_notify; /* pfn from LHCALL_NOTIFY */ - /* At end of a page shared mapped over lguest_pages in guest. */ + /* At end of a page shared mapped over lguest_pages in guest. */ unsigned long regs_page; struct lguest_regs *regs; struct lguest_pages *last_pages; - int cpu_pgd; /* which pgd this cpu is currently using */ + int cpu_pgd; /* Which pgd this cpu is currently using */ /* If a hypercall was asked for, this points to the arguments. */ struct hcall_args *hcall; @@ -96,8 +96,11 @@ struct lguest unsigned int nr_cpus; u32 pfn_limit; - /* This provides the offset to the base of guest-physical - * memory in the Launcher. */ + + /* + * This provides the offset to the base of guest-physical memory in the + * Launcher. + */ void __user *mem_base; unsigned long kernel_address; @@ -122,11 +125,13 @@ bool lguest_address_ok(const struct lguest *lg, void __lgread(struct lg_cpu *, void *, unsigned long, unsigned); void __lgwrite(struct lg_cpu *, unsigned long, const void *, unsigned); -/*H:035 Using memory-copy operations like that is usually inconvient, so we +/*H:035 + * Using memory-copy operations like that is usually inconvient, so we * have the following helper macros which read and write a specific type (often * an unsigned long). * - * This reads into a variable of the given type then returns that. */ + * This reads into a variable of the given type then returns that. + */ #define lgread(cpu, addr, type) \ ({ type _v; __lgread((cpu), &_v, (addr), sizeof(_v)); _v; }) @@ -140,9 +145,11 @@ void __lgwrite(struct lg_cpu *, unsigned long, const void *, unsigned); int run_guest(struct lg_cpu *cpu, unsigned long __user *user); -/* Helper macros to obtain the first 12 or the last 20 bits, this is only the +/* + * Helper macros to obtain the first 12 or the last 20 bits, this is only the * first step in the migration to the kernel types. pte_pfn is already defined - * in the kernel. */ + * in the kernel. + */ #define pgd_flags(x) (pgd_val(x) & ~PAGE_MASK) #define pgd_pfn(x) (pgd_val(x) >> PAGE_SHIFT) #define pmd_flags(x) (pmd_val(x) & ~PAGE_MASK) diff --git a/drivers/lguest/lguest_device.c b/drivers/lguest/lguest_device.c index e082cdac88b..cc000e79c3d 100644 --- a/drivers/lguest/lguest_device.c +++ b/drivers/lguest/lguest_device.c @@ -1,10 +1,12 @@ -/*P:050 Lguest guests use a very simple method to describe devices. It's a +/*P:050 + * Lguest guests use a very simple method to describe devices. It's a * series of device descriptors contained just above the top of normal Guest * memory. * * We use the standard "virtio" device infrastructure, which provides us with a * console, a network and a block driver. Each one expects some configuration - * information and a "virtqueue" or two to send and receive data. :*/ + * information and a "virtqueue" or two to send and receive data. +:*/ #include #include #include @@ -20,8 +22,10 @@ /* The pointer to our (page) of device descriptions. */ static void *lguest_devices; -/* For Guests, device memory can be used as normal memory, so we cast away the - * __iomem to quieten sparse. */ +/* + * For Guests, device memory can be used as normal memory, so we cast away the + * __iomem to quieten sparse. + */ static inline void *lguest_map(unsigned long phys_addr, unsigned long pages) { return (__force void *)ioremap_cache(phys_addr, PAGE_SIZE*pages); @@ -32,8 +36,10 @@ static inline void lguest_unmap(void *addr) iounmap((__force void __iomem *)addr); } -/*D:100 Each lguest device is just a virtio device plus a pointer to its entry - * in the lguest_devices page. */ +/*D:100 + * Each lguest device is just a virtio device plus a pointer to its entry + * in the lguest_devices page. + */ struct lguest_device { struct virtio_device vdev; @@ -41,9 +47,11 @@ struct lguest_device { struct lguest_device_desc *desc; }; -/* Since the virtio infrastructure hands us a pointer to the virtio_device all +/* + * Since the virtio infrastructure hands us a pointer to the virtio_device all * the time, it helps to have a curt macro to get a pointer to the struct - * lguest_device it's enclosed in. */ + * lguest_device it's enclosed in. + */ #define to_lgdev(vd) container_of(vd, struct lguest_device, vdev) /*D:130 @@ -55,7 +63,8 @@ struct lguest_device { * the driver will look at them during setup. * * A convenient routine to return the device's virtqueue config array: - * immediately after the descriptor. */ + * immediately after the descriptor. + */ static struct lguest_vqconfig *lg_vq(const struct lguest_device_desc *desc) { return (void *)(desc + 1); @@ -98,10 +107,12 @@ static u32 lg_get_features(struct virtio_device *vdev) return features; } -/* The virtio core takes the features the Host offers, and copies the - * ones supported by the driver into the vdev->features array. Once - * that's all sorted out, this routine is called so we can tell the - * Host which features we understand and accept. */ +/* + * The virtio core takes the features the Host offers, and copies the ones + * supported by the driver into the vdev->features array. Once that's all + * sorted out, this routine is called so we can tell the Host which features we + * understand and accept. + */ static void lg_finalize_features(struct virtio_device *vdev) { unsigned int i, bits; @@ -112,10 +123,11 @@ static void lg_finalize_features(struct virtio_device *vdev) /* Give virtio_ring a chance to accept features. */ vring_transport_features(vdev); - /* The vdev->feature array is a Linux bitmask: this isn't the - * same as a the simple array of bits used by lguest devices - * for features. So we do this slow, manual conversion which is - * completely general. */ + /* + * The vdev->feature array is a Linux bitmask: this isn't the same as a + * the simple array of bits used by lguest devices for features. So we + * do this slow, manual conversion which is completely general. + */ memset(out_features, 0, desc->feature_len); bits = min_t(unsigned, desc->feature_len, sizeof(vdev->features)) * 8; for (i = 0; i < bits; i++) { @@ -146,15 +158,19 @@ static void lg_set(struct virtio_device *vdev, unsigned int offset, memcpy(lg_config(desc) + offset, buf, len); } -/* The operations to get and set the status word just access the status field - * of the device descriptor. */ +/* + * The operations to get and set the status word just access the status field + * of the device descriptor. + */ static u8 lg_get_status(struct virtio_device *vdev) { return to_lgdev(vdev)->desc->status; } -/* To notify on status updates, we (ab)use the NOTIFY hypercall, with the - * descriptor address of the device. A zero status means "reset". */ +/* + * To notify on status updates, we (ab)use the NOTIFY hypercall, with the + * descriptor address of the device. A zero status means "reset". + */ static void set_status(struct virtio_device *vdev, u8 status) { unsigned long offset = (void *)to_lgdev(vdev)->desc - lguest_devices; @@ -200,13 +216,17 @@ struct lguest_vq_info void *pages; }; -/* When the virtio_ring code wants to prod the Host, it calls us here and we +/* + * When the virtio_ring code wants to prod the Host, it calls us here and we * make a hypercall. We hand the physical address of the virtqueue so the Host - * knows which virtqueue we're talking about. */ + * knows which virtqueue we're talking about. + */ static void lg_notify(struct virtqueue *vq) { - /* We store our virtqueue information in the "priv" pointer of the - * virtqueue structure. */ + /* + * We store our virtqueue information in the "priv" pointer of the + * virtqueue structure. + */ struct lguest_vq_info *lvq = vq->priv; kvm_hypercall1(LHCALL_NOTIFY, lvq->config.pfn << PAGE_SHIFT); @@ -215,7 +235,8 @@ static void lg_notify(struct virtqueue *vq) /* An extern declaration inside a C file is bad form. Don't do it. */ extern void lguest_setup_irq(unsigned int irq); -/* This routine finds the first virtqueue described in the configuration of +/* + * This routine finds the first virtqueue described in the configuration of * this device and sets it up. * * This is kind of an ugly duckling. It'd be nicer to have a standard @@ -225,7 +246,8 @@ extern void lguest_setup_irq(unsigned int irq); * simpler for the Host to simply tell us where the pages are. * * So we provide drivers with a "find the Nth virtqueue and set it up" - * function. */ + * function. + */ static struct virtqueue *lg_find_vq(struct virtio_device *vdev, unsigned index, void (*callback)(struct virtqueue *vq), @@ -244,9 +266,11 @@ static struct virtqueue *lg_find_vq(struct virtio_device *vdev, if (!lvq) return ERR_PTR(-ENOMEM); - /* Make a copy of the "struct lguest_vqconfig" entry, which sits after + /* + * Make a copy of the "struct lguest_vqconfig" entry, which sits after * the descriptor. We need a copy because the config space might not - * be aligned correctly. */ + * be aligned correctly. + */ memcpy(&lvq->config, lg_vq(ldev->desc)+index, sizeof(lvq->config)); printk("Mapping virtqueue %i addr %lx\n", index, @@ -261,8 +285,10 @@ static struct virtqueue *lg_find_vq(struct virtio_device *vdev, goto free_lvq; } - /* OK, tell virtio_ring.c to set up a virtqueue now we know its size - * and we've got a pointer to its pages. */ + /* + * OK, tell virtio_ring.c to set up a virtqueue now we know its size + * and we've got a pointer to its pages. + */ vq = vring_new_virtqueue(lvq->config.num, LGUEST_VRING_ALIGN, vdev, lvq->pages, lg_notify, callback, name); if (!vq) { @@ -273,18 +299,23 @@ static struct virtqueue *lg_find_vq(struct virtio_device *vdev, /* Make sure the interrupt is allocated. */ lguest_setup_irq(lvq->config.irq); - /* Tell the interrupt for this virtqueue to go to the virtio_ring - * interrupt handler. */ - /* FIXME: We used to have a flag for the Host to tell us we could use + /* + * Tell the interrupt for this virtqueue to go to the virtio_ring + * interrupt handler. + * + * FIXME: We used to have a flag for the Host to tell us we could use * the interrupt as a source of randomness: it'd be nice to have that - * back.. */ + * back. + */ err = request_irq(lvq->config.irq, vring_interrupt, IRQF_SHARED, dev_name(&vdev->dev), vq); if (err) goto destroy_vring; - /* Last of all we hook up our 'struct lguest_vq_info" to the - * virtqueue's priv pointer. */ + /* + * Last of all we hook up our 'struct lguest_vq_info" to the + * virtqueue's priv pointer. + */ vq->priv = lvq; return vq; @@ -358,11 +389,14 @@ static struct virtio_config_ops lguest_config_ops = { .del_vqs = lg_del_vqs, }; -/* The root device for the lguest virtio devices. This makes them appear as - * /sys/devices/lguest/0,1,2 not /sys/devices/0,1,2. */ +/* + * The root device for the lguest virtio devices. This makes them appear as + * /sys/devices/lguest/0,1,2 not /sys/devices/0,1,2. + */ static struct device *lguest_root; -/*D:120 This is the core of the lguest bus: actually adding a new device. +/*D:120 + * This is the core of the lguest bus: actually adding a new device. * It's a separate function because it's neater that way, and because an * earlier version of the code supported hotplug and unplug. They were removed * early on because they were never used. @@ -371,14 +405,14 @@ static struct device *lguest_root; * * It's worth reading this carefully: we start with a pointer to the new device * descriptor in the "lguest_devices" page, and the offset into the device - * descriptor page so we can uniquely identify it if things go badly wrong. */ + * descriptor page so we can uniquely identify it if things go badly wrong. + */ static void add_lguest_device(struct lguest_device_desc *d, unsigned int offset) { struct lguest_device *ldev; - /* Start with zeroed memory; Linux's device layer seems to count on - * it. */ + /* Start with zeroed memory; Linux's device layer counts on it. */ ldev = kzalloc(sizeof(*ldev), GFP_KERNEL); if (!ldev) { printk(KERN_EMERG "Cannot allocate lguest dev %u type %u\n", @@ -390,15 +424,19 @@ static void add_lguest_device(struct lguest_device_desc *d, ldev->vdev.dev.parent = lguest_root; /* We have a unique device index thanks to the dev_index counter. */ ldev->vdev.id.device = d->type; - /* We have a simple set of routines for querying the device's - * configuration information and setting its status. */ + /* + * We have a simple set of routines for querying the device's + * configuration information and setting its status. + */ ldev->vdev.config = &lguest_config_ops; /* And we remember the device's descriptor for lguest_config_ops. */ ldev->desc = d; - /* register_virtio_device() sets up the generic fields for the struct + /* + * register_virtio_device() sets up the generic fields for the struct * virtio_device and calls device_register(). This makes the bus - * infrastructure look for a matching driver. */ + * infrastructure look for a matching driver. + */ if (register_virtio_device(&ldev->vdev) != 0) { printk(KERN_ERR "Failed to register lguest dev %u type %u\n", offset, d->type); @@ -406,8 +444,10 @@ static void add_lguest_device(struct lguest_device_desc *d, } } -/*D:110 scan_devices() simply iterates through the device page. The type 0 is - * reserved to mean "end of devices". */ +/*D:110 + * scan_devices() simply iterates through the device page. The type 0 is + * reserved to mean "end of devices". + */ static void scan_devices(void) { unsigned int i; @@ -426,7 +466,8 @@ static void scan_devices(void) } } -/*D:105 Fairly early in boot, lguest_devices_init() is called to set up the +/*D:105 + * Fairly early in boot, lguest_devices_init() is called to set up the * lguest device infrastructure. We check that we are a Guest by checking * pv_info.name: there are other ways of checking, but this seems most * obvious to me. @@ -437,7 +478,8 @@ static void scan_devices(void) * correct sysfs incantation). * * Finally we call scan_devices() which adds all the devices found in the - * lguest_devices page. */ + * lguest_devices page. + */ static int __init lguest_devices_init(void) { if (strcmp(pv_info.name, "lguest") != 0) @@ -456,11 +498,13 @@ static int __init lguest_devices_init(void) /* We do this after core stuff, but before the drivers. */ postcore_initcall(lguest_devices_init); -/*D:150 At this point in the journey we used to now wade through the lguest +/*D:150 + * At this point in the journey we used to now wade through the lguest * devices themselves: net, block and console. Since they're all now virtio * devices rather than lguest-specific, I've decided to ignore them. Mostly, * they're kind of boring. But this does mean you'll never experience the * thrill of reading the forbidden love scene buried deep in the block driver. * * "make Launcher" beckons, where we answer questions like "Where do Guests - * come from?", and "What do you do when someone asks for optimization?". */ + * come from?", and "What do you do when someone asks for optimization?". + */ diff --git a/drivers/lguest/lguest_user.c b/drivers/lguest/lguest_user.c index 407722a8e0c..7e92017103d 100644 --- a/drivers/lguest/lguest_user.c +++ b/drivers/lguest/lguest_user.c @@ -1,8 +1,10 @@ -/*P:200 This contains all the /dev/lguest code, whereby the userspace launcher +/*P:200 + * This contains all the /dev/lguest code, whereby the userspace launcher * controls and communicates with the Guest. For example, the first write will * tell us the Guest's memory layout, pagetable, entry point and kernel address * offset. A read will run the Guest until something happens, such as a signal - * or the Guest doing a NOTIFY out to the Launcher. :*/ + * or the Guest doing a NOTIFY out to the Launcher. +:*/ #include #include #include @@ -37,8 +39,10 @@ static int add_eventfd(struct lguest *lg, unsigned long addr, int fd) if (!addr) return -EINVAL; - /* Replace the old array with the new one, carefully: others can - * be accessing it at the same time */ + /* + * Replace the old array with the new one, carefully: others can + * be accessing it at the same time. + */ new = kmalloc(sizeof(*new) + sizeof(new->map[0]) * (old->num + 1), GFP_KERNEL); if (!new) @@ -61,8 +65,10 @@ static int add_eventfd(struct lguest *lg, unsigned long addr, int fd) /* Now put new one in place. */ rcu_assign_pointer(lg->eventfds, new); - /* We're not in a big hurry. Wait until noone's looking at old - * version, then delete it. */ + /* + * We're not in a big hurry. Wait until noone's looking at old + * version, then delete it. + */ synchronize_rcu(); kfree(old); @@ -87,8 +93,10 @@ static int attach_eventfd(struct lguest *lg, const unsigned long __user *input) return err; } -/*L:050 Sending an interrupt is done by writing LHREQ_IRQ and an interrupt - * number to /dev/lguest. */ +/*L:050 + * Sending an interrupt is done by writing LHREQ_IRQ and an interrupt + * number to /dev/lguest. + */ static int user_send_irq(struct lg_cpu *cpu, const unsigned long __user *input) { unsigned long irq; @@ -102,8 +110,10 @@ static int user_send_irq(struct lg_cpu *cpu, const unsigned long __user *input) return 0; } -/*L:040 Once our Guest is initialized, the Launcher makes it run by reading - * from /dev/lguest. */ +/*L:040 + * Once our Guest is initialized, the Launcher makes it run by reading + * from /dev/lguest. + */ static ssize_t read(struct file *file, char __user *user, size_t size,loff_t*o) { struct lguest *lg = file->private_data; @@ -139,8 +149,10 @@ static ssize_t read(struct file *file, char __user *user, size_t size,loff_t*o) return len; } - /* If we returned from read() last time because the Guest sent I/O, - * clear the flag. */ + /* + * If we returned from read() last time because the Guest sent I/O, + * clear the flag. + */ if (cpu->pending_notify) cpu->pending_notify = 0; @@ -148,8 +160,10 @@ static ssize_t read(struct file *file, char __user *user, size_t size,loff_t*o) return run_guest(cpu, (unsigned long __user *)user); } -/*L:025 This actually initializes a CPU. For the moment, a Guest is only - * uniprocessor, so "id" is always 0. */ +/*L:025 + * This actually initializes a CPU. For the moment, a Guest is only + * uniprocessor, so "id" is always 0. + */ static int lg_cpu_start(struct lg_cpu *cpu, unsigned id, unsigned long start_ip) { /* We have a limited number the number of CPUs in the lguest struct. */ @@ -164,8 +178,10 @@ static int lg_cpu_start(struct lg_cpu *cpu, unsigned id, unsigned long start_ip) /* Each CPU has a timer it can set. */ init_clockdev(cpu); - /* We need a complete page for the Guest registers: they are accessible - * to the Guest and we can only grant it access to whole pages. */ + /* + * We need a complete page for the Guest registers: they are accessible + * to the Guest and we can only grant it access to whole pages. + */ cpu->regs_page = get_zeroed_page(GFP_KERNEL); if (!cpu->regs_page) return -ENOMEM; @@ -173,29 +189,38 @@ static int lg_cpu_start(struct lg_cpu *cpu, unsigned id, unsigned long start_ip) /* We actually put the registers at the bottom of the page. */ cpu->regs = (void *)cpu->regs_page + PAGE_SIZE - sizeof(*cpu->regs); - /* Now we initialize the Guest's registers, handing it the start - * address. */ + /* + * Now we initialize the Guest's registers, handing it the start + * address. + */ lguest_arch_setup_regs(cpu, start_ip); - /* We keep a pointer to the Launcher task (ie. current task) for when - * other Guests want to wake this one (eg. console input). */ + /* + * We keep a pointer to the Launcher task (ie. current task) for when + * other Guests want to wake this one (eg. console input). + */ cpu->tsk = current; - /* We need to keep a pointer to the Launcher's memory map, because if + /* + * We need to keep a pointer to the Launcher's memory map, because if * the Launcher dies we need to clean it up. If we don't keep a - * reference, it is destroyed before close() is called. */ + * reference, it is destroyed before close() is called. + */ cpu->mm = get_task_mm(cpu->tsk); - /* We remember which CPU's pages this Guest used last, for optimization - * when the same Guest runs on the same CPU twice. */ + /* + * We remember which CPU's pages this Guest used last, for optimization + * when the same Guest runs on the same CPU twice. + */ cpu->last_pages = NULL; /* No error == success. */ return 0; } -/*L:020 The initialization write supplies 3 pointer sized (32 or 64 bit) - * values (in addition to the LHREQ_INITIALIZE value). These are: +/*L:020 + * The initialization write supplies 3 pointer sized (32 or 64 bit) values (in + * addition to the LHREQ_INITIALIZE value). These are: * * base: The start of the Guest-physical memory inside the Launcher memory. * @@ -207,14 +232,15 @@ static int lg_cpu_start(struct lg_cpu *cpu, unsigned id, unsigned long start_ip) */ static int initialize(struct file *file, const unsigned long __user *input) { - /* "struct lguest" contains everything we (the Host) know about a - * Guest. */ + /* "struct lguest" contains all we (the Host) know about a Guest. */ struct lguest *lg; int err; unsigned long args[3]; - /* We grab the Big Lguest lock, which protects against multiple - * simultaneous initializations. */ + /* + * We grab the Big Lguest lock, which protects against multiple + * simultaneous initializations. + */ mutex_lock(&lguest_lock); /* You can't initialize twice! Close the device and start again... */ if (file->private_data) { @@ -249,8 +275,10 @@ static int initialize(struct file *file, const unsigned long __user *input) if (err) goto free_eventfds; - /* Initialize the Guest's shadow page tables, using the toplevel - * address the Launcher gave us. This allocates memory, so can fail. */ + /* + * Initialize the Guest's shadow page tables, using the toplevel + * address the Launcher gave us. This allocates memory, so can fail. + */ err = init_guest_pagetable(lg); if (err) goto free_regs; @@ -275,7 +303,8 @@ unlock: return err; } -/*L:010 The first operation the Launcher does must be a write. All writes +/*L:010 + * The first operation the Launcher does must be a write. All writes * start with an unsigned long number: for the first write this must be * LHREQ_INITIALIZE to set up the Guest. After that the Launcher can use * writes of other values to send interrupts. @@ -283,12 +312,15 @@ unlock: * Note that we overload the "offset" in the /dev/lguest file to indicate what * CPU number we're dealing with. Currently this is always 0, since we only * support uniprocessor Guests, but you can see the beginnings of SMP support - * here. */ + * here. + */ static ssize_t write(struct file *file, const char __user *in, size_t size, loff_t *off) { - /* Once the Guest is initialized, we hold the "struct lguest" in the - * file private data. */ + /* + * Once the Guest is initialized, we hold the "struct lguest" in the + * file private data. + */ struct lguest *lg = file->private_data; const unsigned long __user *input = (const unsigned long __user *)in; unsigned long req; @@ -323,13 +355,15 @@ static ssize_t write(struct file *file, const char __user *in, } } -/*L:060 The final piece of interface code is the close() routine. It reverses +/*L:060 + * The final piece of interface code is the close() routine. It reverses * everything done in initialize(). This is usually called because the * Launcher exited. * * Note that the close routine returns 0 or a negative error number: it can't * really fail, but it can whine. I blame Sun for this wart, and K&R C for - * letting them do it. :*/ + * letting them do it. +:*/ static int close(struct inode *inode, struct file *file) { struct lguest *lg = file->private_data; @@ -339,8 +373,10 @@ static int close(struct inode *inode, struct file *file) if (!lg) return 0; - /* We need the big lock, to protect from inter-guest I/O and other - * Launchers initializing guests. */ + /* + * We need the big lock, to protect from inter-guest I/O and other + * Launchers initializing guests. + */ mutex_lock(&lguest_lock); /* Free up the shadow page tables for the Guest. */ @@ -351,8 +387,10 @@ static int close(struct inode *inode, struct file *file) hrtimer_cancel(&lg->cpus[i].hrt); /* We can free up the register page we allocated. */ free_page(lg->cpus[i].regs_page); - /* Now all the memory cleanups are done, it's safe to release - * the Launcher's memory management structure. */ + /* + * Now all the memory cleanups are done, it's safe to release + * the Launcher's memory management structure. + */ mmput(lg->cpus[i].mm); } @@ -361,8 +399,10 @@ static int close(struct inode *inode, struct file *file) eventfd_ctx_put(lg->eventfds->map[i].event); kfree(lg->eventfds); - /* If lg->dead doesn't contain an error code it will be NULL or a - * kmalloc()ed string, either of which is ok to hand to kfree(). */ + /* + * If lg->dead doesn't contain an error code it will be NULL or a + * kmalloc()ed string, either of which is ok to hand to kfree(). + */ if (!IS_ERR(lg->dead)) kfree(lg->dead); /* Free the memory allocated to the lguest_struct */ @@ -386,7 +426,8 @@ static int close(struct inode *inode, struct file *file) * * We begin our understanding with the Host kernel interface which the Launcher * uses: reading and writing a character device called /dev/lguest. All the - * work happens in the read(), write() and close() routines: */ + * work happens in the read(), write() and close() routines: + */ static struct file_operations lguest_fops = { .owner = THIS_MODULE, .release = close, @@ -394,8 +435,10 @@ static struct file_operations lguest_fops = { .read = read, }; -/* This is a textbook example of a "misc" character device. Populate a "struct - * miscdevice" and register it with misc_register(). */ +/* + * This is a textbook example of a "misc" character device. Populate a "struct + * miscdevice" and register it with misc_register(). + */ static struct miscdevice lguest_dev = { .minor = MISC_DYNAMIC_MINOR, .name = "lguest", diff --git a/drivers/lguest/page_tables.c b/drivers/lguest/page_tables.c index a6fe1abda24..3da902e4b4c 100644 --- a/drivers/lguest/page_tables.c +++ b/drivers/lguest/page_tables.c @@ -1,9 +1,11 @@ -/*P:700 The pagetable code, on the other hand, still shows the scars of +/*P:700 + * The pagetable code, on the other hand, still shows the scars of * previous encounters. It's functional, and as neat as it can be in the * circumstances, but be wary, for these things are subtle and break easily. * The Guest provides a virtual to physical mapping, but we can neither trust * it nor use it: we verify and convert it here then point the CPU to the - * converted Guest pages when running the Guest. :*/ + * converted Guest pages when running the Guest. +:*/ /* Copyright (C) Rusty Russell IBM Corporation 2006. * GPL v2 and any later version */ @@ -17,10 +19,12 @@ #include #include "lg.h" -/*M:008 We hold reference to pages, which prevents them from being swapped. +/*M:008 + * We hold reference to pages, which prevents them from being swapped. * It'd be nice to have a callback in the "struct mm_struct" when Linux wants * to swap out. If we had this, and a shrinker callback to trim PTE pages, we - * could probably consider launching Guests as non-root. :*/ + * could probably consider launching Guests as non-root. +:*/ /*H:300 * The Page Table Code @@ -45,16 +49,19 @@ * (v) Flushing (throwing away) page tables, * (vi) Mapping the Switcher when the Guest is about to run, * (vii) Setting up the page tables initially. - :*/ +:*/ - -/* 1024 entries in a page table page maps 1024 pages: 4MB. The Switcher is +/* + * 1024 entries in a page table page maps 1024 pages: 4MB. The Switcher is * conveniently placed at the top 4MB, so it uses a separate, complete PTE - * page. */ + * page. + */ #define SWITCHER_PGD_INDEX (PTRS_PER_PGD - 1) -/* For PAE we need the PMD index as well. We use the last 2MB, so we - * will need the last pmd entry of the last pmd page. */ +/* + * For PAE we need the PMD index as well. We use the last 2MB, so we + * will need the last pmd entry of the last pmd page. + */ #ifdef CONFIG_X86_PAE #define SWITCHER_PMD_INDEX (PTRS_PER_PMD - 1) #define RESERVE_MEM 2U @@ -64,13 +71,16 @@ #define CHECK_GPGD_MASK _PAGE_TABLE #endif -/* We actually need a separate PTE page for each CPU. Remember that after the +/* + * We actually need a separate PTE page for each CPU. Remember that after the * Switcher code itself comes two pages for each CPU, and we don't want this - * CPU's guest to see the pages of any other CPU. */ + * CPU's guest to see the pages of any other CPU. + */ static DEFINE_PER_CPU(pte_t *, switcher_pte_pages); #define switcher_pte_page(cpu) per_cpu(switcher_pte_pages, cpu) -/*H:320 The page table code is curly enough to need helper functions to keep it +/*H:320 + * The page table code is curly enough to need helper functions to keep it * clear and clean. * * There are two functions which return pointers to the shadow (aka "real") @@ -79,7 +89,8 @@ static DEFINE_PER_CPU(pte_t *, switcher_pte_pages); * spgd_addr() takes the virtual address and returns a pointer to the top-level * page directory entry (PGD) for that address. Since we keep track of several * page tables, the "i" argument tells us which one we're interested in (it's - * usually the current one). */ + * usually the current one). + */ static pgd_t *spgd_addr(struct lg_cpu *cpu, u32 i, unsigned long vaddr) { unsigned int index = pgd_index(vaddr); @@ -96,9 +107,11 @@ static pgd_t *spgd_addr(struct lg_cpu *cpu, u32 i, unsigned long vaddr) } #ifdef CONFIG_X86_PAE -/* This routine then takes the PGD entry given above, which contains the +/* + * This routine then takes the PGD entry given above, which contains the * address of the PMD page. It then returns a pointer to the PMD entry for the - * given address. */ + * given address. + */ static pmd_t *spmd_addr(struct lg_cpu *cpu, pgd_t spgd, unsigned long vaddr) { unsigned int index = pmd_index(vaddr); @@ -119,9 +132,11 @@ static pmd_t *spmd_addr(struct lg_cpu *cpu, pgd_t spgd, unsigned long vaddr) } #endif -/* This routine then takes the page directory entry returned above, which +/* + * This routine then takes the page directory entry returned above, which * contains the address of the page table entry (PTE) page. It then returns a - * pointer to the PTE entry for the given address. */ + * pointer to the PTE entry for the given address. + */ static pte_t *spte_addr(struct lg_cpu *cpu, pgd_t spgd, unsigned long vaddr) { #ifdef CONFIG_X86_PAE @@ -139,8 +154,10 @@ static pte_t *spte_addr(struct lg_cpu *cpu, pgd_t spgd, unsigned long vaddr) return &page[pte_index(vaddr)]; } -/* These two functions just like the above two, except they access the Guest - * page tables. Hence they return a Guest address. */ +/* + * These two functions just like the above two, except they access the Guest + * page tables. Hence they return a Guest address. + */ static unsigned long gpgd_addr(struct lg_cpu *cpu, unsigned long vaddr) { unsigned int index = vaddr >> (PGDIR_SHIFT); @@ -175,17 +192,21 @@ static unsigned long gpte_addr(struct lg_cpu *cpu, #endif /*:*/ -/*M:014 get_pfn is slow: we could probably try to grab batches of pages here as - * an optimization (ie. pre-faulting). :*/ +/*M:014 + * get_pfn is slow: we could probably try to grab batches of pages here as + * an optimization (ie. pre-faulting). +:*/ -/*H:350 This routine takes a page number given by the Guest and converts it to +/*H:350 + * This routine takes a page number given by the Guest and converts it to * an actual, physical page number. It can fail for several reasons: the * virtual address might not be mapped by the Launcher, the write flag is set * and the page is read-only, or the write flag was set and the page was * shared so had to be copied, but we ran out of memory. * * This holds a reference to the page, so release_pte() is careful to put that - * back. */ + * back. + */ static unsigned long get_pfn(unsigned long virtpfn, int write) { struct page *page; @@ -198,33 +219,41 @@ static unsigned long get_pfn(unsigned long virtpfn, int write) return -1UL; } -/*H:340 Converting a Guest page table entry to a shadow (ie. real) page table +/*H:340 + * Converting a Guest page table entry to a shadow (ie. real) page table * entry can be a little tricky. The flags are (almost) the same, but the * Guest PTE contains a virtual page number: the CPU needs the real page - * number. */ + * number. + */ static pte_t gpte_to_spte(struct lg_cpu *cpu, pte_t gpte, int write) { unsigned long pfn, base, flags; - /* The Guest sets the global flag, because it thinks that it is using + /* + * The Guest sets the global flag, because it thinks that it is using * PGE. We only told it to use PGE so it would tell us whether it was * flushing a kernel mapping or a userspace mapping. We don't actually - * use the global bit, so throw it away. */ + * use the global bit, so throw it away. + */ flags = (pte_flags(gpte) & ~_PAGE_GLOBAL); /* The Guest's pages are offset inside the Launcher. */ base = (unsigned long)cpu->lg->mem_base / PAGE_SIZE; - /* We need a temporary "unsigned long" variable to hold the answer from + /* + * We need a temporary "unsigned long" variable to hold the answer from * get_pfn(), because it returns 0xFFFFFFFF on failure, which wouldn't * fit in spte.pfn. get_pfn() finds the real physical number of the - * page, given the virtual number. */ + * page, given the virtual number. + */ pfn = get_pfn(base + pte_pfn(gpte), write); if (pfn == -1UL) { kill_guest(cpu, "failed to get page %lu", pte_pfn(gpte)); - /* When we destroy the Guest, we'll go through the shadow page + /* + * When we destroy the Guest, we'll go through the shadow page * tables and release_pte() them. Make sure we don't think - * this one is valid! */ + * this one is valid! + */ flags = 0; } /* Now we assemble our shadow PTE from the page number and flags. */ @@ -234,8 +263,10 @@ static pte_t gpte_to_spte(struct lg_cpu *cpu, pte_t gpte, int write) /*H:460 And to complete the chain, release_pte() looks like this: */ static void release_pte(pte_t pte) { - /* Remember that get_user_pages_fast() took a reference to the page, in - * get_pfn()? We have to put it back now. */ + /* + * Remember that get_user_pages_fast() took a reference to the page, in + * get_pfn()? We have to put it back now. + */ if (pte_flags(pte) & _PAGE_PRESENT) put_page(pte_page(pte)); } @@ -273,7 +304,8 @@ static void check_gpmd(struct lg_cpu *cpu, pmd_t gpmd) * and return to the Guest without it knowing. * * If we fixed up the fault (ie. we mapped the address), this routine returns - * true. Otherwise, it was a real fault and we need to tell the Guest. */ + * true. Otherwise, it was a real fault and we need to tell the Guest. + */ bool demand_page(struct lg_cpu *cpu, unsigned long vaddr, int errcode) { pgd_t gpgd; @@ -298,22 +330,26 @@ bool demand_page(struct lg_cpu *cpu, unsigned long vaddr, int errcode) if (!(pgd_flags(*spgd) & _PAGE_PRESENT)) { /* No shadow entry: allocate a new shadow PTE page. */ unsigned long ptepage = get_zeroed_page(GFP_KERNEL); - /* This is not really the Guest's fault, but killing it is - * simple for this corner case. */ + /* + * This is not really the Guest's fault, but killing it is + * simple for this corner case. + */ if (!ptepage) { kill_guest(cpu, "out of memory allocating pte page"); return false; } /* We check that the Guest pgd is OK. */ check_gpgd(cpu, gpgd); - /* And we copy the flags to the shadow PGD entry. The page - * number in the shadow PGD is the page we just allocated. */ + /* + * And we copy the flags to the shadow PGD entry. The page + * number in the shadow PGD is the page we just allocated. + */ set_pgd(spgd, __pgd(__pa(ptepage) | pgd_flags(gpgd))); } #ifdef CONFIG_X86_PAE gpmd = lgread(cpu, gpmd_addr(gpgd, vaddr), pmd_t); - /* middle level not present? We can't map it in. */ + /* Middle level not present? We can't map it in. */ if (!(pmd_flags(gpmd) & _PAGE_PRESENT)) return false; @@ -324,8 +360,10 @@ bool demand_page(struct lg_cpu *cpu, unsigned long vaddr, int errcode) /* No shadow entry: allocate a new shadow PTE page. */ unsigned long ptepage = get_zeroed_page(GFP_KERNEL); - /* This is not really the Guest's fault, but killing it is - * simple for this corner case. */ + /* + * This is not really the Guest's fault, but killing it is + * simple for this corner case. + */ if (!ptepage) { kill_guest(cpu, "out of memory allocating pte page"); return false; @@ -334,17 +372,23 @@ bool demand_page(struct lg_cpu *cpu, unsigned long vaddr, int errcode) /* We check that the Guest pmd is OK. */ check_gpmd(cpu, gpmd); - /* And we copy the flags to the shadow PMD entry. The page - * number in the shadow PMD is the page we just allocated. */ + /* + * And we copy the flags to the shadow PMD entry. The page + * number in the shadow PMD is the page we just allocated. + */ native_set_pmd(spmd, __pmd(__pa(ptepage) | pmd_flags(gpmd))); } - /* OK, now we look at the lower level in the Guest page table: keep its - * address, because we might update it later. */ + /* + * OK, now we look at the lower level in the Guest page table: keep its + * address, because we might update it later. + */ gpte_ptr = gpte_addr(cpu, gpmd, vaddr); #else - /* OK, now we look at the lower level in the Guest page table: keep its - * address, because we might update it later. */ + /* + * OK, now we look at the lower level in the Guest page table: keep its + * address, because we might update it later. + */ gpte_ptr = gpte_addr(cpu, gpgd, vaddr); #endif gpte = lgread(cpu, gpte_ptr, pte_t); @@ -353,8 +397,10 @@ bool demand_page(struct lg_cpu *cpu, unsigned long vaddr, int errcode) if (!(pte_flags(gpte) & _PAGE_PRESENT)) return false; - /* Check they're not trying to write to a page the Guest wants - * read-only (bit 2 of errcode == write). */ + /* + * Check they're not trying to write to a page the Guest wants + * read-only (bit 2 of errcode == write). + */ if ((errcode & 2) && !(pte_flags(gpte) & _PAGE_RW)) return false; @@ -362,8 +408,10 @@ bool demand_page(struct lg_cpu *cpu, unsigned long vaddr, int errcode) if ((errcode & 4) && !(pte_flags(gpte) & _PAGE_USER)) return false; - /* Check that the Guest PTE flags are OK, and the page number is below - * the pfn_limit (ie. not mapping the Launcher binary). */ + /* + * Check that the Guest PTE flags are OK, and the page number is below + * the pfn_limit (ie. not mapping the Launcher binary). + */ check_gpte(cpu, gpte); /* Add the _PAGE_ACCESSED and (for a write) _PAGE_DIRTY flag */ @@ -373,29 +421,40 @@ bool demand_page(struct lg_cpu *cpu, unsigned long vaddr, int errcode) /* Get the pointer to the shadow PTE entry we're going to set. */ spte = spte_addr(cpu, *spgd, vaddr); - /* If there was a valid shadow PTE entry here before, we release it. - * This can happen with a write to a previously read-only entry. */ + + /* + * If there was a valid shadow PTE entry here before, we release it. + * This can happen with a write to a previously read-only entry. + */ release_pte(*spte); - /* If this is a write, we insist that the Guest page is writable (the - * final arg to gpte_to_spte()). */ + /* + * If this is a write, we insist that the Guest page is writable (the + * final arg to gpte_to_spte()). + */ if (pte_dirty(gpte)) *spte = gpte_to_spte(cpu, gpte, 1); else - /* If this is a read, don't set the "writable" bit in the page + /* + * If this is a read, don't set the "writable" bit in the page * table entry, even if the Guest says it's writable. That way * we will come back here when a write does actually occur, so - * we can update the Guest's _PAGE_DIRTY flag. */ + * we can update the Guest's _PAGE_DIRTY flag. + */ native_set_pte(spte, gpte_to_spte(cpu, pte_wrprotect(gpte), 0)); - /* Finally, we write the Guest PTE entry back: we've set the - * _PAGE_ACCESSED and maybe the _PAGE_DIRTY flags. */ + /* + * Finally, we write the Guest PTE entry back: we've set the + * _PAGE_ACCESSED and maybe the _PAGE_DIRTY flags. + */ lgwrite(cpu, gpte_ptr, pte_t, gpte); - /* The fault is fixed, the page table is populated, the mapping + /* + * The fault is fixed, the page table is populated, the mapping * manipulated, the result returned and the code complete. A small * delay and a trace of alliteration are the only indications the Guest - * has that a page fault occurred at all. */ + * has that a page fault occurred at all. + */ return true; } @@ -408,7 +467,8 @@ bool demand_page(struct lg_cpu *cpu, unsigned long vaddr, int errcode) * mapped, so it's overkill. * * This is a quick version which answers the question: is this virtual address - * mapped by the shadow page tables, and is it writable? */ + * mapped by the shadow page tables, and is it writable? + */ static bool page_writable(struct lg_cpu *cpu, unsigned long vaddr) { pgd_t *spgd; @@ -428,16 +488,20 @@ static bool page_writable(struct lg_cpu *cpu, unsigned long vaddr) return false; #endif - /* Check the flags on the pte entry itself: it must be present and - * writable. */ + /* + * Check the flags on the pte entry itself: it must be present and + * writable. + */ flags = pte_flags(*(spte_addr(cpu, *spgd, vaddr))); return (flags & (_PAGE_PRESENT|_PAGE_RW)) == (_PAGE_PRESENT|_PAGE_RW); } -/* So, when pin_stack_pages() asks us to pin a page, we check if it's already +/* + * So, when pin_stack_pages() asks us to pin a page, we check if it's already * in the page tables, and if not, we call demand_page() with error code 2 - * (meaning "write"). */ + * (meaning "write"). + */ void pin_page(struct lg_cpu *cpu, unsigned long vaddr) { if (!page_writable(cpu, vaddr) && !demand_page(cpu, vaddr, 2)) @@ -485,9 +549,11 @@ static void release_pgd(pgd_t *spgd) /* If the entry's not present, there's nothing to release. */ if (pgd_flags(*spgd) & _PAGE_PRESENT) { unsigned int i; - /* Converting the pfn to find the actual PTE page is easy: turn + /* + * Converting the pfn to find the actual PTE page is easy: turn * the page number into a physical address, then convert to a - * virtual address (easy for kernel pages like this one). */ + * virtual address (easy for kernel pages like this one). + */ pte_t *ptepage = __va(pgd_pfn(*spgd) << PAGE_SHIFT); /* For each entry in the page, we might need to release it. */ for (i = 0; i < PTRS_PER_PTE; i++) @@ -499,9 +565,12 @@ static void release_pgd(pgd_t *spgd) } } #endif -/*H:445 We saw flush_user_mappings() twice: once from the flush_user_mappings() + +/*H:445 + * We saw flush_user_mappings() twice: once from the flush_user_mappings() * hypercall and once in new_pgdir() when we re-used a top-level pgdir page. - * It simply releases every PTE page from 0 up to the Guest's kernel address. */ + * It simply releases every PTE page from 0 up to the Guest's kernel address. + */ static void flush_user_mappings(struct lguest *lg, int idx) { unsigned int i; @@ -510,10 +579,12 @@ static void flush_user_mappings(struct lguest *lg, int idx) release_pgd(lg->pgdirs[idx].pgdir + i); } -/*H:440 (v) Flushing (throwing away) page tables, +/*H:440 + * (v) Flushing (throwing away) page tables, * * The Guest has a hypercall to throw away the page tables: it's used when a - * large number of mappings have been changed. */ + * large number of mappings have been changed. + */ void guest_pagetable_flush_user(struct lg_cpu *cpu) { /* Drop the userspace part of the current page table. */ @@ -551,9 +622,11 @@ unsigned long guest_pa(struct lg_cpu *cpu, unsigned long vaddr) return pte_pfn(gpte) * PAGE_SIZE | (vaddr & ~PAGE_MASK); } -/* We keep several page tables. This is a simple routine to find the page +/* + * We keep several page tables. This is a simple routine to find the page * table (if any) corresponding to this top-level address the Guest has given - * us. */ + * us. + */ static unsigned int find_pgdir(struct lguest *lg, unsigned long pgtable) { unsigned int i; @@ -563,9 +636,11 @@ static unsigned int find_pgdir(struct lguest *lg, unsigned long pgtable) return i; } -/*H:435 And this is us, creating the new page directory. If we really do +/*H:435 + * And this is us, creating the new page directory. If we really do * allocate a new one (and so the kernel parts are not there), we set - * blank_pgdir. */ + * blank_pgdir. + */ static unsigned int new_pgdir(struct lg_cpu *cpu, unsigned long gpgdir, int *blank_pgdir) @@ -575,8 +650,10 @@ static unsigned int new_pgdir(struct lg_cpu *cpu, pmd_t *pmd_table; #endif - /* We pick one entry at random to throw out. Choosing the Least - * Recently Used might be better, but this is easy. */ + /* + * We pick one entry at random to throw out. Choosing the Least + * Recently Used might be better, but this is easy. + */ next = random32() % ARRAY_SIZE(cpu->lg->pgdirs); /* If it's never been allocated at all before, try now. */ if (!cpu->lg->pgdirs[next].pgdir) { @@ -587,8 +664,10 @@ static unsigned int new_pgdir(struct lg_cpu *cpu, next = cpu->cpu_pgd; else { #ifdef CONFIG_X86_PAE - /* In PAE mode, allocate a pmd page and populate the - * last pgd entry. */ + /* + * In PAE mode, allocate a pmd page and populate the + * last pgd entry. + */ pmd_table = (pmd_t *)get_zeroed_page(GFP_KERNEL); if (!pmd_table) { free_page((long)cpu->lg->pgdirs[next].pgdir); @@ -598,8 +677,10 @@ static unsigned int new_pgdir(struct lg_cpu *cpu, set_pgd(cpu->lg->pgdirs[next].pgdir + SWITCHER_PGD_INDEX, __pgd(__pa(pmd_table) | _PAGE_PRESENT)); - /* This is a blank page, so there are no kernel - * mappings: caller must map the stack! */ + /* + * This is a blank page, so there are no kernel + * mappings: caller must map the stack! + */ *blank_pgdir = 1; } #else @@ -615,19 +696,23 @@ static unsigned int new_pgdir(struct lg_cpu *cpu, return next; } -/*H:430 (iv) Switching page tables +/*H:430 + * (iv) Switching page tables * * Now we've seen all the page table setting and manipulation, let's see * what happens when the Guest changes page tables (ie. changes the top-level - * pgdir). This occurs on almost every context switch. */ + * pgdir). This occurs on almost every context switch. + */ void guest_new_pagetable(struct lg_cpu *cpu, unsigned long pgtable) { int newpgdir, repin = 0; /* Look to see if we have this one already. */ newpgdir = find_pgdir(cpu->lg, pgtable); - /* If not, we allocate or mug an existing one: if it's a fresh one, - * repin gets set to 1. */ + /* + * If not, we allocate or mug an existing one: if it's a fresh one, + * repin gets set to 1. + */ if (newpgdir == ARRAY_SIZE(cpu->lg->pgdirs)) newpgdir = new_pgdir(cpu, pgtable, &repin); /* Change the current pgd index to the new one. */ @@ -637,9 +722,11 @@ void guest_new_pagetable(struct lg_cpu *cpu, unsigned long pgtable) pin_stack_pages(cpu); } -/*H:470 Finally, a routine which throws away everything: all PGD entries in all +/*H:470 + * Finally, a routine which throws away everything: all PGD entries in all * the shadow page tables, including the Guest's kernel mappings. This is used - * when we destroy the Guest. */ + * when we destroy the Guest. + */ static void release_all_pagetables(struct lguest *lg) { unsigned int i, j; @@ -656,8 +743,10 @@ static void release_all_pagetables(struct lguest *lg) spgd = lg->pgdirs[i].pgdir + SWITCHER_PGD_INDEX; pmdpage = __va(pgd_pfn(*spgd) << PAGE_SHIFT); - /* And release the pmd entries of that pmd page, - * except for the switcher pmd. */ + /* + * And release the pmd entries of that pmd page, + * except for the switcher pmd. + */ for (k = 0; k < SWITCHER_PMD_INDEX; k++) release_pmd(&pmdpage[k]); #endif @@ -667,10 +756,12 @@ static void release_all_pagetables(struct lguest *lg) } } -/* We also throw away everything when a Guest tells us it's changed a kernel +/* + * We also throw away everything when a Guest tells us it's changed a kernel * mapping. Since kernel mappings are in every page table, it's easiest to * throw them all away. This traps the Guest in amber for a while as - * everything faults back in, but it's rare. */ + * everything faults back in, but it's rare. + */ void guest_pagetable_clear_all(struct lg_cpu *cpu) { release_all_pagetables(cpu->lg); @@ -678,15 +769,19 @@ void guest_pagetable_clear_all(struct lg_cpu *cpu) pin_stack_pages(cpu); } /*:*/ -/*M:009 Since we throw away all mappings when a kernel mapping changes, our + +/*M:009 + * Since we throw away all mappings when a kernel mapping changes, our * performance sucks for guests using highmem. In fact, a guest with * PAGE_OFFSET 0xc0000000 (the default) and more than about 700MB of RAM is * usually slower than a Guest with less memory. * * This, of course, cannot be fixed. It would take some kind of... well, I - * don't know, but the term "puissant code-fu" comes to mind. :*/ + * don't know, but the term "puissant code-fu" comes to mind. +:*/ -/*H:420 This is the routine which actually sets the page table entry for then +/*H:420 + * This is the routine which actually sets the page table entry for then * "idx"'th shadow page table. * * Normally, we can just throw out the old entry and replace it with 0: if they @@ -715,31 +810,36 @@ static void do_set_pte(struct lg_cpu *cpu, int idx, spmd = spmd_addr(cpu, *spgd, vaddr); if (pmd_flags(*spmd) & _PAGE_PRESENT) { #endif - /* Otherwise, we start by releasing - * the existing entry. */ + /* Otherwise, start by releasing the existing entry. */ pte_t *spte = spte_addr(cpu, *spgd, vaddr); release_pte(*spte); - /* If they're setting this entry as dirty or accessed, - * we might as well put that entry they've given us - * in now. This shaves 10% off a - * copy-on-write micro-benchmark. */ + /* + * If they're setting this entry as dirty or accessed, + * we might as well put that entry they've given us in + * now. This shaves 10% off a copy-on-write + * micro-benchmark. + */ if (pte_flags(gpte) & (_PAGE_DIRTY | _PAGE_ACCESSED)) { check_gpte(cpu, gpte); native_set_pte(spte, gpte_to_spte(cpu, gpte, pte_flags(gpte) & _PAGE_DIRTY)); - } else - /* Otherwise kill it and we can demand_page() - * it in later. */ + } else { + /* + * Otherwise kill it and we can demand_page() + * it in later. + */ native_set_pte(spte, __pte(0)); + } #ifdef CONFIG_X86_PAE } #endif } } -/*H:410 Updating a PTE entry is a little trickier. +/*H:410 + * Updating a PTE entry is a little trickier. * * We keep track of several different page tables (the Guest uses one for each * process, so it makes sense to cache at least a few). Each of these have @@ -748,12 +848,15 @@ static void do_set_pte(struct lg_cpu *cpu, int idx, * all the page tables, not just the current one. This is rare. * * The benefit is that when we have to track a new page table, we can keep all - * the kernel mappings. This speeds up context switch immensely. */ + * the kernel mappings. This speeds up context switch immensely. + */ void guest_set_pte(struct lg_cpu *cpu, unsigned long gpgdir, unsigned long vaddr, pte_t gpte) { - /* Kernel mappings must be changed on all top levels. Slow, but doesn't - * happen often. */ + /* + * Kernel mappings must be changed on all top levels. Slow, but doesn't + * happen often. + */ if (vaddr >= cpu->lg->kernel_address) { unsigned int i; for (i = 0; i < ARRAY_SIZE(cpu->lg->pgdirs); i++) @@ -802,12 +905,14 @@ void guest_set_pmd(struct lguest *lg, unsigned long pmdp, u32 idx) } #endif -/* Once we know how much memory we have we can construct simple identity - * (which set virtual == physical) and linear mappings - * which will get the Guest far enough into the boot to create its own. +/* + * Once we know how much memory we have we can construct simple identity (which + * set virtual == physical) and linear mappings which will get the Guest far + * enough into the boot to create its own. * * We lay them out of the way, just below the initrd (which is why we need to - * know its size here). */ + * know its size here). + */ static unsigned long setup_pagetables(struct lguest *lg, unsigned long mem, unsigned long initrd_size) @@ -825,8 +930,10 @@ static unsigned long setup_pagetables(struct lguest *lg, unsigned int phys_linear; #endif - /* We have mapped_pages frames to map, so we need - * linear_pages page tables to map them. */ + /* + * We have mapped_pages frames to map, so we need linear_pages page + * tables to map them. + */ mapped_pages = mem / PAGE_SIZE; linear_pages = (mapped_pages + PTRS_PER_PTE - 1) / PTRS_PER_PTE; @@ -839,8 +946,10 @@ static unsigned long setup_pagetables(struct lguest *lg, #ifdef CONFIG_X86_PAE pmds = (void *)linear - PAGE_SIZE; #endif - /* Linear mapping is easy: put every page's address into the - * mapping in order. */ + /* + * Linear mapping is easy: put every page's address into the + * mapping in order. + */ for (i = 0; i < mapped_pages; i++) { pte_t pte; pte = pfn_pte(i, __pgprot(_PAGE_PRESENT|_PAGE_RW|_PAGE_USER)); @@ -848,8 +957,10 @@ static unsigned long setup_pagetables(struct lguest *lg, return -EFAULT; } - /* The top level points to the linear page table pages above. - * We setup the identity and linear mappings here. */ + /* + * The top level points to the linear page table pages above. + * We setup the identity and linear mappings here. + */ #ifdef CONFIG_X86_PAE for (i = j = 0; i < mapped_pages && j < PTRS_PER_PMD; i += PTRS_PER_PTE, j++) { @@ -880,15 +991,19 @@ static unsigned long setup_pagetables(struct lguest *lg, } #endif - /* We return the top level (guest-physical) address: remember where - * this is. */ + /* + * We return the top level (guest-physical) address: remember where + * this is. + */ return (unsigned long)pgdir - mem_base; } -/*H:500 (vii) Setting up the page tables initially. +/*H:500 + * (vii) Setting up the page tables initially. * * When a Guest is first created, the Launcher tells us where the toplevel of - * its first page table is. We set some things up here: */ + * its first page table is. We set some things up here: + */ int init_guest_pagetable(struct lguest *lg) { u64 mem; @@ -898,14 +1013,18 @@ int init_guest_pagetable(struct lguest *lg) pgd_t *pgd; pmd_t *pmd_table; #endif - /* Get the Guest memory size and the ramdisk size from the boot header - * located at lg->mem_base (Guest address 0). */ + /* + * Get the Guest memory size and the ramdisk size from the boot header + * located at lg->mem_base (Guest address 0). + */ if (copy_from_user(&mem, &boot->e820_map[0].size, sizeof(mem)) || get_user(initrd_size, &boot->hdr.ramdisk_size)) return -EFAULT; - /* We start on the first shadow page table, and give it a blank PGD - * page. */ + /* + * We start on the first shadow page table, and give it a blank PGD + * page. + */ lg->pgdirs[0].gpgdir = setup_pagetables(lg, mem, initrd_size); if (IS_ERR_VALUE(lg->pgdirs[0].gpgdir)) return lg->pgdirs[0].gpgdir; @@ -931,17 +1050,21 @@ void page_table_guest_data_init(struct lg_cpu *cpu) /* We get the kernel address: above this is all kernel memory. */ if (get_user(cpu->lg->kernel_address, &cpu->lg->lguest_data->kernel_address) - /* We tell the Guest that it can't use the top 2 or 4 MB - * of virtual addresses used by the Switcher. */ + /* + * We tell the Guest that it can't use the top 2 or 4 MB + * of virtual addresses used by the Switcher. + */ || put_user(RESERVE_MEM * 1024 * 1024, &cpu->lg->lguest_data->reserve_mem) || put_user(cpu->lg->pgdirs[0].gpgdir, &cpu->lg->lguest_data->pgdir)) kill_guest(cpu, "bad guest page %p", cpu->lg->lguest_data); - /* In flush_user_mappings() we loop from 0 to + /* + * In flush_user_mappings() we loop from 0 to * "pgd_index(lg->kernel_address)". This assumes it won't hit the - * Switcher mappings, so check that now. */ + * Switcher mappings, so check that now. + */ #ifdef CONFIG_X86_PAE if (pgd_index(cpu->lg->kernel_address) == SWITCHER_PGD_INDEX && pmd_index(cpu->lg->kernel_address) == SWITCHER_PMD_INDEX) @@ -964,12 +1087,14 @@ void free_guest_pagetable(struct lguest *lg) free_page((long)lg->pgdirs[i].pgdir); } -/*H:480 (vi) Mapping the Switcher when the Guest is about to run. +/*H:480 + * (vi) Mapping the Switcher when the Guest is about to run. * * The Switcher and the two pages for this CPU need to be visible in the * Guest (and not the pages for other CPUs). We have the appropriate PTE pages * for each CPU already set up, we just need to hook them in now we know which - * Guest is about to run on this CPU. */ + * Guest is about to run on this CPU. + */ void map_switcher_in_guest(struct lg_cpu *cpu, struct lguest_pages *pages) { pte_t *switcher_pte_page = __get_cpu_var(switcher_pte_pages); @@ -990,20 +1115,24 @@ void map_switcher_in_guest(struct lg_cpu *cpu, struct lguest_pages *pages) #else pgd_t switcher_pgd; - /* Make the last PGD entry for this Guest point to the Switcher's PTE - * page for this CPU (with appropriate flags). */ + /* + * Make the last PGD entry for this Guest point to the Switcher's PTE + * page for this CPU (with appropriate flags). + */ switcher_pgd = __pgd(__pa(switcher_pte_page) | __PAGE_KERNEL_EXEC); cpu->lg->pgdirs[cpu->cpu_pgd].pgdir[SWITCHER_PGD_INDEX] = switcher_pgd; #endif - /* We also change the Switcher PTE page. When we're running the Guest, + /* + * We also change the Switcher PTE page. When we're running the Guest, * we want the Guest's "regs" page to appear where the first Switcher * page for this CPU is. This is an optimization: when the Switcher * saves the Guest registers, it saves them into the first page of this * CPU's "struct lguest_pages": if we make sure the Guest's register * page is already mapped there, we don't have to copy them out - * again. */ + * again. + */ pfn = __pa(cpu->regs_page) >> PAGE_SHIFT; native_set_pte(®s_pte, pfn_pte(pfn, PAGE_KERNEL)); native_set_pte(&switcher_pte_page[pte_index((unsigned long)pages)], @@ -1019,10 +1148,12 @@ static void free_switcher_pte_pages(void) free_page((long)switcher_pte_page(i)); } -/*H:520 Setting up the Switcher PTE page for given CPU is fairly easy, given +/*H:520 + * Setting up the Switcher PTE page for given CPU is fairly easy, given * the CPU number and the "struct page"s for the Switcher code itself. * - * Currently the Switcher is less than a page long, so "pages" is always 1. */ + * Currently the Switcher is less than a page long, so "pages" is always 1. + */ static __init void populate_switcher_pte_page(unsigned int cpu, struct page *switcher_page[], unsigned int pages) @@ -1043,13 +1174,16 @@ static __init void populate_switcher_pte_page(unsigned int cpu, native_set_pte(&pte[i], pfn_pte(page_to_pfn(switcher_page[i]), __pgprot(_PAGE_PRESENT|_PAGE_ACCESSED|_PAGE_RW))); - /* The second page contains the "struct lguest_ro_state", and is - * read-only. */ + /* + * The second page contains the "struct lguest_ro_state", and is + * read-only. + */ native_set_pte(&pte[i+1], pfn_pte(page_to_pfn(switcher_page[i+1]), __pgprot(_PAGE_PRESENT|_PAGE_ACCESSED))); } -/* We've made it through the page table code. Perhaps our tired brains are +/* + * We've made it through the page table code. Perhaps our tired brains are * still processing the details, or perhaps we're simply glad it's over. * * If nothing else, note that all this complexity in juggling shadow page tables @@ -1058,10 +1192,13 @@ static __init void populate_switcher_pte_page(unsigned int cpu, * uses exotic direct Guest pagetable manipulation, and why both Intel and AMD * have implemented shadow page table support directly into hardware. * - * There is just one file remaining in the Host. */ + * There is just one file remaining in the Host. + */ -/*H:510 At boot or module load time, init_pagetables() allocates and populates - * the Switcher PTE page for each CPU. */ +/*H:510 + * At boot or module load time, init_pagetables() allocates and populates + * the Switcher PTE page for each CPU. + */ __init int init_pagetables(struct page **switcher_page, unsigned int pages) { unsigned int i; diff --git a/drivers/lguest/segments.c b/drivers/lguest/segments.c index 482ed5a1875..951c57b0a7e 100644 --- a/drivers/lguest/segments.c +++ b/drivers/lguest/segments.c @@ -1,4 +1,5 @@ -/*P:600 The x86 architecture has segments, which involve a table of descriptors +/*P:600 + * The x86 architecture has segments, which involve a table of descriptors * which can be used to do funky things with virtual address interpretation. * We originally used to use segments so the Guest couldn't alter the * Guest<->Host Switcher, and then we had to trim Guest segments, and restore @@ -8,7 +9,8 @@ * * In these modern times, the segment handling code consists of simple sanity * checks, and the worst you'll experience reading this code is butterfly-rash - * from frolicking through its parklike serenity. :*/ + * from frolicking through its parklike serenity. +:*/ #include "lg.h" /*H:600 @@ -41,10 +43,12 @@ * begin. */ -/* There are several entries we don't let the Guest set. The TSS entry is the +/* + * There are several entries we don't let the Guest set. The TSS entry is the * "Task State Segment" which controls all kinds of delicate things. The * LGUEST_CS and LGUEST_DS entries are reserved for the Switcher, and the - * the Guest can't be trusted to deal with double faults. */ + * the Guest can't be trusted to deal with double faults. + */ static bool ignored_gdt(unsigned int num) { return (num == GDT_ENTRY_TSS @@ -53,42 +57,52 @@ static bool ignored_gdt(unsigned int num) || num == GDT_ENTRY_DOUBLEFAULT_TSS); } -/*H:630 Once the Guest gave us new GDT entries, we fix them up a little. We +/*H:630 + * Once the Guest gave us new GDT entries, we fix them up a little. We * don't care if they're invalid: the worst that can happen is a General * Protection Fault in the Switcher when it restores a Guest segment register * which tries to use that entry. Then we kill the Guest for causing such a - * mess: the message will be "unhandled trap 256". */ + * mess: the message will be "unhandled trap 256". + */ static void fixup_gdt_table(struct lg_cpu *cpu, unsigned start, unsigned end) { unsigned int i; for (i = start; i < end; i++) { - /* We never copy these ones to real GDT, so we don't care what - * they say */ + /* + * We never copy these ones to real GDT, so we don't care what + * they say + */ if (ignored_gdt(i)) continue; - /* Segment descriptors contain a privilege level: the Guest is + /* + * Segment descriptors contain a privilege level: the Guest is * sometimes careless and leaves this as 0, even though it's - * running at privilege level 1. If so, we fix it here. */ + * running at privilege level 1. If so, we fix it here. + */ if ((cpu->arch.gdt[i].b & 0x00006000) == 0) cpu->arch.gdt[i].b |= (GUEST_PL << 13); - /* Each descriptor has an "accessed" bit. If we don't set it + /* + * Each descriptor has an "accessed" bit. If we don't set it * now, the CPU will try to set it when the Guest first loads * that entry into a segment register. But the GDT isn't - * writable by the Guest, so bad things can happen. */ + * writable by the Guest, so bad things can happen. + */ cpu->arch.gdt[i].b |= 0x00000100; } } -/*H:610 Like the IDT, we never simply use the GDT the Guest gives us. We keep +/*H:610 + * Like the IDT, we never simply use the GDT the Guest gives us. We keep * a GDT for each CPU, and copy across the Guest's entries each time we want to * run the Guest on that CPU. * * This routine is called at boot or modprobe time for each CPU to set up the * constant GDT entries: the ones which are the same no matter what Guest we're - * running. */ + * running. + */ void setup_default_gdt_entries(struct lguest_ro_state *state) { struct desc_struct *gdt = state->guest_gdt; @@ -98,30 +112,37 @@ void setup_default_gdt_entries(struct lguest_ro_state *state) gdt[GDT_ENTRY_LGUEST_CS] = FULL_EXEC_SEGMENT; gdt[GDT_ENTRY_LGUEST_DS] = FULL_SEGMENT; - /* The TSS segment refers to the TSS entry for this particular CPU. + /* + * The TSS segment refers to the TSS entry for this particular CPU. * Forgive the magic flags: the 0x8900 means the entry is Present, it's * privilege level 0 Available 386 TSS system segment, and the 0x67 - * means Saturn is eclipsed by Mercury in the twelfth house. */ + * means Saturn is eclipsed by Mercury in the twelfth house. + */ gdt[GDT_ENTRY_TSS].a = 0x00000067 | (tss << 16); gdt[GDT_ENTRY_TSS].b = 0x00008900 | (tss & 0xFF000000) | ((tss >> 16) & 0x000000FF); } -/* This routine sets up the initial Guest GDT for booting. All entries start - * as 0 (unusable). */ +/* + * This routine sets up the initial Guest GDT for booting. All entries start + * as 0 (unusable). + */ void setup_guest_gdt(struct lg_cpu *cpu) { - /* Start with full 0-4G segments... */ + /* + * Start with full 0-4G segments...except the Guest is allowed to use + * them, so set the privilege level appropriately in the flags. + */ cpu->arch.gdt[GDT_ENTRY_KERNEL_CS] = FULL_EXEC_SEGMENT; cpu->arch.gdt[GDT_ENTRY_KERNEL_DS] = FULL_SEGMENT; - /* ...except the Guest is allowed to use them, so set the privilege - * level appropriately in the flags. */ cpu->arch.gdt[GDT_ENTRY_KERNEL_CS].b |= (GUEST_PL << 13); cpu->arch.gdt[GDT_ENTRY_KERNEL_DS].b |= (GUEST_PL << 13); } -/*H:650 An optimization of copy_gdt(), for just the three "thead-local storage" - * entries. */ +/*H:650 + * An optimization of copy_gdt(), for just the three "thead-local storage" + * entries. + */ void copy_gdt_tls(const struct lg_cpu *cpu, struct desc_struct *gdt) { unsigned int i; @@ -130,26 +151,34 @@ void copy_gdt_tls(const struct lg_cpu *cpu, struct desc_struct *gdt) gdt[i] = cpu->arch.gdt[i]; } -/*H:640 When the Guest is run on a different CPU, or the GDT entries have - * changed, copy_gdt() is called to copy the Guest's GDT entries across to this - * CPU's GDT. */ +/*H:640 + * When the Guest is run on a different CPU, or the GDT entries have changed, + * copy_gdt() is called to copy the Guest's GDT entries across to this CPU's + * GDT. + */ void copy_gdt(const struct lg_cpu *cpu, struct desc_struct *gdt) { unsigned int i; - /* The default entries from setup_default_gdt_entries() are not - * replaced. See ignored_gdt() above. */ + /* + * The default entries from setup_default_gdt_entries() are not + * replaced. See ignored_gdt() above. + */ for (i = 0; i < GDT_ENTRIES; i++) if (!ignored_gdt(i)) gdt[i] = cpu->arch.gdt[i]; } -/*H:620 This is where the Guest asks us to load a new GDT entry - * (LHCALL_LOAD_GDT_ENTRY). We tweak the entry and copy it in. */ +/*H:620 + * This is where the Guest asks us to load a new GDT entry + * (LHCALL_LOAD_GDT_ENTRY). We tweak the entry and copy it in. + */ void load_guest_gdt_entry(struct lg_cpu *cpu, u32 num, u32 lo, u32 hi) { - /* We assume the Guest has the same number of GDT entries as the - * Host, otherwise we'd have to dynamically allocate the Guest GDT. */ + /* + * We assume the Guest has the same number of GDT entries as the + * Host, otherwise we'd have to dynamically allocate the Guest GDT. + */ if (num >= ARRAY_SIZE(cpu->arch.gdt)) kill_guest(cpu, "too many gdt entries %i", num); @@ -157,15 +186,19 @@ void load_guest_gdt_entry(struct lg_cpu *cpu, u32 num, u32 lo, u32 hi) cpu->arch.gdt[num].a = lo; cpu->arch.gdt[num].b = hi; fixup_gdt_table(cpu, num, num+1); - /* Mark that the GDT changed so the core knows it has to copy it again, - * even if the Guest is run on the same CPU. */ + /* + * Mark that the GDT changed so the core knows it has to copy it again, + * even if the Guest is run on the same CPU. + */ cpu->changed |= CHANGED_GDT; } -/* This is the fast-track version for just changing the three TLS entries. +/* + * This is the fast-track version for just changing the three TLS entries. * Remember that this happens on every context switch, so it's worth * optimizing. But wouldn't it be neater to have a single hypercall to cover - * both cases? */ + * both cases? + */ void guest_load_tls(struct lg_cpu *cpu, unsigned long gtls) { struct desc_struct *tls = &cpu->arch.gdt[GDT_ENTRY_TLS_MIN]; @@ -175,7 +208,6 @@ void guest_load_tls(struct lg_cpu *cpu, unsigned long gtls) /* Note that just the TLS entries have changed. */ cpu->changed |= CHANGED_GDT_TLS; } -/*:*/ /*H:660 * With this, we have finished the Host. diff --git a/drivers/lguest/x86/core.c b/drivers/lguest/x86/core.c index eaf722fe309..96f7d88ec7f 100644 --- a/drivers/lguest/x86/core.c +++ b/drivers/lguest/x86/core.c @@ -17,13 +17,15 @@ * along with this program; if not, write to the Free Software * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. */ -/*P:450 This file contains the x86-specific lguest code. It used to be all +/*P:450 + * This file contains the x86-specific lguest code. It used to be all * mixed in with drivers/lguest/core.c but several foolhardy code slashers * wrestled most of the dependencies out to here in preparation for porting * lguest to other architectures (see what I mean by foolhardy?). * * This also contains a couple of non-obvious setup and teardown pieces which - * were implemented after days of debugging pain. :*/ + * were implemented after days of debugging pain. +:*/ #include #include #include @@ -82,25 +84,33 @@ static DEFINE_PER_CPU(struct lg_cpu *, last_cpu); */ static void copy_in_guest_info(struct lg_cpu *cpu, struct lguest_pages *pages) { - /* Copying all this data can be quite expensive. We usually run the + /* + * Copying all this data can be quite expensive. We usually run the * same Guest we ran last time (and that Guest hasn't run anywhere else * meanwhile). If that's not the case, we pretend everything in the - * Guest has changed. */ + * Guest has changed. + */ if (__get_cpu_var(last_cpu) != cpu || cpu->last_pages != pages) { __get_cpu_var(last_cpu) = cpu; cpu->last_pages = pages; cpu->changed = CHANGED_ALL; } - /* These copies are pretty cheap, so we do them unconditionally: */ - /* Save the current Host top-level page directory. */ + /* + * These copies are pretty cheap, so we do them unconditionally: */ + /* Save the current Host top-level page directory. + */ pages->state.host_cr3 = __pa(current->mm->pgd); - /* Set up the Guest's page tables to see this CPU's pages (and no - * other CPU's pages). */ + /* + * Set up the Guest's page tables to see this CPU's pages (and no + * other CPU's pages). + */ map_switcher_in_guest(cpu, pages); - /* Set up the two "TSS" members which tell the CPU what stack to use + /* + * Set up the two "TSS" members which tell the CPU what stack to use * for traps which do directly into the Guest (ie. traps at privilege - * level 1). */ + * level 1). + */ pages->state.guest_tss.sp1 = cpu->esp1; pages->state.guest_tss.ss1 = cpu->ss1; @@ -125,40 +135,53 @@ static void run_guest_once(struct lg_cpu *cpu, struct lguest_pages *pages) /* This is a dummy value we need for GCC's sake. */ unsigned int clobber; - /* Copy the guest-specific information into this CPU's "struct - * lguest_pages". */ + /* + * Copy the guest-specific information into this CPU's "struct + * lguest_pages". + */ copy_in_guest_info(cpu, pages); - /* Set the trap number to 256 (impossible value). If we fault while + /* + * Set the trap number to 256 (impossible value). If we fault while * switching to the Guest (bad segment registers or bug), this will - * cause us to abort the Guest. */ + * cause us to abort the Guest. + */ cpu->regs->trapnum = 256; - /* Now: we push the "eflags" register on the stack, then do an "lcall". + /* + * Now: we push the "eflags" register on the stack, then do an "lcall". * This is how we change from using the kernel code segment to using * the dedicated lguest code segment, as well as jumping into the * Switcher. * * The lcall also pushes the old code segment (KERNEL_CS) onto the * stack, then the address of this call. This stack layout happens to - * exactly match the stack layout created by an interrupt... */ + * exactly match the stack layout created by an interrupt... + */ asm volatile("pushf; lcall *lguest_entry" - /* This is how we tell GCC that %eax ("a") and %ebx ("b") - * are changed by this routine. The "=" means output. */ + /* + * This is how we tell GCC that %eax ("a") and %ebx ("b") + * are changed by this routine. The "=" means output. + */ : "=a"(clobber), "=b"(clobber) - /* %eax contains the pages pointer. ("0" refers to the + /* + * %eax contains the pages pointer. ("0" refers to the * 0-th argument above, ie "a"). %ebx contains the * physical address of the Guest's top-level page - * directory. */ + * directory. + */ : "0"(pages), "1"(__pa(cpu->lg->pgdirs[cpu->cpu_pgd].pgdir)) - /* We tell gcc that all these registers could change, + /* + * We tell gcc that all these registers could change, * which means we don't have to save and restore them in - * the Switcher. */ + * the Switcher. + */ : "memory", "%edx", "%ecx", "%edi", "%esi"); } /*:*/ -/*M:002 There are hooks in the scheduler which we can register to tell when we +/*M:002 + * There are hooks in the scheduler which we can register to tell when we * get kicked off the CPU (preempt_notifier_register()). This would allow us * to lazily disable SYSENTER which would regain some performance, and should * also simplify copy_in_guest_info(). Note that we'd still need to restore @@ -166,56 +189,72 @@ static void run_guest_once(struct lg_cpu *cpu, struct lguest_pages *pages) * * We could also try using this hooks for PGE, but that might be too expensive. * - * The hooks were designed for KVM, but we can also put them to good use. :*/ + * The hooks were designed for KVM, but we can also put them to good use. +:*/ -/*H:040 This is the i386-specific code to setup and run the Guest. Interrupts - * are disabled: we own the CPU. */ +/*H:040 + * This is the i386-specific code to setup and run the Guest. Interrupts + * are disabled: we own the CPU. + */ void lguest_arch_run_guest(struct lg_cpu *cpu) { - /* Remember the awfully-named TS bit? If the Guest has asked to set it + /* + * Remember the awfully-named TS bit? If the Guest has asked to set it * we set it now, so we can trap and pass that trap to the Guest if it - * uses the FPU. */ + * uses the FPU. + */ if (cpu->ts) unlazy_fpu(current); - /* SYSENTER is an optimized way of doing system calls. We can't allow + /* + * SYSENTER is an optimized way of doing system calls. We can't allow * it because it always jumps to privilege level 0. A normal Guest * won't try it because we don't advertise it in CPUID, but a malicious * Guest (or malicious Guest userspace program) could, so we tell the - * CPU to disable it before running the Guest. */ + * CPU to disable it before running the Guest. + */ if (boot_cpu_has(X86_FEATURE_SEP)) wrmsr(MSR_IA32_SYSENTER_CS, 0, 0); - /* Now we actually run the Guest. It will return when something + /* + * Now we actually run the Guest. It will return when something * interesting happens, and we can examine its registers to see what it - * was doing. */ + * was doing. + */ run_guest_once(cpu, lguest_pages(raw_smp_processor_id())); - /* Note that the "regs" structure contains two extra entries which are + /* + * Note that the "regs" structure contains two extra entries which are * not really registers: a trap number which says what interrupt or * trap made the switcher code come back, and an error code which some - * traps set. */ + * traps set. + */ /* Restore SYSENTER if it's supposed to be on. */ if (boot_cpu_has(X86_FEATURE_SEP)) wrmsr(MSR_IA32_SYSENTER_CS, __KERNEL_CS, 0); - /* If the Guest page faulted, then the cr2 register will tell us the + /* + * If the Guest page faulted, then the cr2 register will tell us the * bad virtual address. We have to grab this now, because once we * re-enable interrupts an interrupt could fault and thus overwrite - * cr2, or we could even move off to a different CPU. */ + * cr2, or we could even move off to a different CPU. + */ if (cpu->regs->trapnum == 14) cpu->arch.last_pagefault = read_cr2(); - /* Similarly, if we took a trap because the Guest used the FPU, + /* + * Similarly, if we took a trap because the Guest used the FPU, * we have to restore the FPU it expects to see. * math_state_restore() may sleep and we may even move off to * a different CPU. So all the critical stuff should be done - * before this. */ + * before this. + */ else if (cpu->regs->trapnum == 7) math_state_restore(); } -/*H:130 Now we've examined the hypercall code; our Guest can make requests. +/*H:130 + * Now we've examined the hypercall code; our Guest can make requests. * Our Guest is usually so well behaved; it never tries to do things it isn't * allowed to, and uses hypercalls instead. Unfortunately, Linux's paravirtual * infrastructure isn't quite complete, because it doesn't contain replacements @@ -225,26 +264,33 @@ void lguest_arch_run_guest(struct lg_cpu *cpu) * * When the Guest uses one of these instructions, we get a trap (General * Protection Fault) and come here. We see if it's one of those troublesome - * instructions and skip over it. We return true if we did. */ + * instructions and skip over it. We return true if we did. + */ static int emulate_insn(struct lg_cpu *cpu) { u8 insn; unsigned int insnlen = 0, in = 0, shift = 0; - /* The eip contains the *virtual* address of the Guest's instruction: - * guest_pa just subtracts the Guest's page_offset. */ + /* + * The eip contains the *virtual* address of the Guest's instruction: + * guest_pa just subtracts the Guest's page_offset. + */ unsigned long physaddr = guest_pa(cpu, cpu->regs->eip); - /* This must be the Guest kernel trying to do something, not userspace! + /* + * This must be the Guest kernel trying to do something, not userspace! * The bottom two bits of the CS segment register are the privilege - * level. */ + * level. + */ if ((cpu->regs->cs & 3) != GUEST_PL) return 0; /* Decoding x86 instructions is icky. */ insn = lgread(cpu, physaddr, u8); - /* 0x66 is an "operand prefix". It means it's using the upper 16 bits - of the eax register. */ + /* + * 0x66 is an "operand prefix". It means it's using the upper 16 bits + * of the eax register. + */ if (insn == 0x66) { shift = 16; /* The instruction is 1 byte so far, read the next byte. */ @@ -252,8 +298,10 @@ static int emulate_insn(struct lg_cpu *cpu) insn = lgread(cpu, physaddr + insnlen, u8); } - /* We can ignore the lower bit for the moment and decode the 4 opcodes - * we need to emulate. */ + /* + * We can ignore the lower bit for the moment and decode the 4 opcodes + * we need to emulate. + */ switch (insn & 0xFE) { case 0xE4: /* in ,%al */ insnlen += 2; @@ -274,9 +322,11 @@ static int emulate_insn(struct lg_cpu *cpu) return 0; } - /* If it was an "IN" instruction, they expect the result to be read + /* + * If it was an "IN" instruction, they expect the result to be read * into %eax, so we change %eax. We always return all-ones, which - * traditionally means "there's nothing there". */ + * traditionally means "there's nothing there". + */ if (in) { /* Lower bit tells is whether it's a 16 or 32 bit access */ if (insn & 0x1) @@ -290,7 +340,8 @@ static int emulate_insn(struct lg_cpu *cpu) return 1; } -/* Our hypercalls mechanism used to be based on direct software interrupts. +/* + * Our hypercalls mechanism used to be based on direct software interrupts. * After Anthony's "Refactor hypercall infrastructure" kvm patch, we decided to * change over to using kvm hypercalls. * @@ -318,16 +369,20 @@ static int emulate_insn(struct lg_cpu *cpu) */ static void rewrite_hypercall(struct lg_cpu *cpu) { - /* This are the opcodes we use to patch the Guest. The opcode for "int + /* + * This are the opcodes we use to patch the Guest. The opcode for "int * $0x1f" is "0xcd 0x1f" but vmcall instruction is 3 bytes long, so we - * complete the sequence with a NOP (0x90). */ + * complete the sequence with a NOP (0x90). + */ u8 insn[3] = {0xcd, 0x1f, 0x90}; __lgwrite(cpu, guest_pa(cpu, cpu->regs->eip), insn, sizeof(insn)); - /* The above write might have caused a copy of that page to be made + /* + * The above write might have caused a copy of that page to be made * (if it was read-only). We need to make sure the Guest has * up-to-date pagetables. As this doesn't happen often, we can just - * drop them all. */ + * drop them all. + */ guest_pagetable_clear_all(cpu); } @@ -335,9 +390,11 @@ static bool is_hypercall(struct lg_cpu *cpu) { u8 insn[3]; - /* This must be the Guest kernel trying to do something. + /* + * This must be the Guest kernel trying to do something. * The bottom two bits of the CS segment register are the privilege - * level. */ + * level. + */ if ((cpu->regs->cs & 3) != GUEST_PL) return false; @@ -351,86 +408,105 @@ void lguest_arch_handle_trap(struct lg_cpu *cpu) { switch (cpu->regs->trapnum) { case 13: /* We've intercepted a General Protection Fault. */ - /* Check if this was one of those annoying IN or OUT + /* + * Check if this was one of those annoying IN or OUT * instructions which we need to emulate. If so, we just go - * back into the Guest after we've done it. */ + * back into the Guest after we've done it. + */ if (cpu->regs->errcode == 0) { if (emulate_insn(cpu)) return; } - /* If KVM is active, the vmcall instruction triggers a - * General Protection Fault. Normally it triggers an - * invalid opcode fault (6): */ + /* + * If KVM is active, the vmcall instruction triggers a General + * Protection Fault. Normally it triggers an invalid opcode + * fault (6): + */ case 6: - /* We need to check if ring == GUEST_PL and - * faulting instruction == vmcall. */ + /* + * We need to check if ring == GUEST_PL and faulting + * instruction == vmcall. + */ if (is_hypercall(cpu)) { rewrite_hypercall(cpu); return; } break; case 14: /* We've intercepted a Page Fault. */ - /* The Guest accessed a virtual address that wasn't mapped. + /* + * The Guest accessed a virtual address that wasn't mapped. * This happens a lot: we don't actually set up most of the page * tables for the Guest at all when we start: as it runs it asks * for more and more, and we set them up as required. In this * case, we don't even tell the Guest that the fault happened. * * The errcode tells whether this was a read or a write, and - * whether kernel or userspace code. */ + * whether kernel or userspace code. + */ if (demand_page(cpu, cpu->arch.last_pagefault, cpu->regs->errcode)) return; - /* OK, it's really not there (or not OK): the Guest needs to + /* + * OK, it's really not there (or not OK): the Guest needs to * know. We write out the cr2 value so it knows where the * fault occurred. * * Note that if the Guest were really messed up, this could * happen before it's done the LHCALL_LGUEST_INIT hypercall, so - * lg->lguest_data could be NULL */ + * lg->lguest_data could be NULL + */ if (cpu->lg->lguest_data && put_user(cpu->arch.last_pagefault, &cpu->lg->lguest_data->cr2)) kill_guest(cpu, "Writing cr2"); break; case 7: /* We've intercepted a Device Not Available fault. */ - /* If the Guest doesn't want to know, we already restored the - * Floating Point Unit, so we just continue without telling - * it. */ + /* + * If the Guest doesn't want to know, we already restored the + * Floating Point Unit, so we just continue without telling it. + */ if (!cpu->ts) return; break; case 32 ... 255: - /* These values mean a real interrupt occurred, in which case + /* + * These values mean a real interrupt occurred, in which case * the Host handler has already been run. We just do a * friendly check if another process should now be run, then - * return to run the Guest again */ + * return to run the Guest again + */ cond_resched(); return; case LGUEST_TRAP_ENTRY: - /* Our 'struct hcall_args' maps directly over our regs: we set - * up the pointer now to indicate a hypercall is pending. */ + /* + * Our 'struct hcall_args' maps directly over our regs: we set + * up the pointer now to indicate a hypercall is pending. + */ cpu->hcall = (struct hcall_args *)cpu->regs; return; } /* We didn't handle the trap, so it needs to go to the Guest. */ if (!deliver_trap(cpu, cpu->regs->trapnum)) - /* If the Guest doesn't have a handler (either it hasn't + /* + * If the Guest doesn't have a handler (either it hasn't * registered any yet, or it's one of the faults we don't let - * it handle), it dies with this cryptic error message. */ + * it handle), it dies with this cryptic error message. + */ kill_guest(cpu, "unhandled trap %li at %#lx (%#lx)", cpu->regs->trapnum, cpu->regs->eip, cpu->regs->trapnum == 14 ? cpu->arch.last_pagefault : cpu->regs->errcode); } -/* Now we can look at each of the routines this calls, in increasing order of +/* + * Now we can look at each of the routines this calls, in increasing order of * complexity: do_hypercalls(), emulate_insn(), maybe_do_interrupt(), * deliver_trap() and demand_page(). After all those, we'll be ready to * examine the Switcher, and our philosophical understanding of the Host/Guest - * duality will be complete. :*/ + * duality will be complete. +:*/ static void adjust_pge(void *on) { if (on) @@ -439,13 +515,16 @@ static void adjust_pge(void *on) write_cr4(read_cr4() & ~X86_CR4_PGE); } -/*H:020 Now the Switcher is mapped and every thing else is ready, we need to do - * some more i386-specific initialization. */ +/*H:020 + * Now the Switcher is mapped and every thing else is ready, we need to do + * some more i386-specific initialization. + */ void __init lguest_arch_host_init(void) { int i; - /* Most of the i386/switcher.S doesn't care that it's been moved; on + /* + * Most of the i386/switcher.S doesn't care that it's been moved; on * Intel, jumps are relative, and it doesn't access any references to * external code or data. * @@ -453,7 +532,8 @@ void __init lguest_arch_host_init(void) * addresses are placed in a table (default_idt_entries), so we need to * update the table with the new addresses. switcher_offset() is a * convenience function which returns the distance between the - * compiled-in switcher code and the high-mapped copy we just made. */ + * compiled-in switcher code and the high-mapped copy we just made. + */ for (i = 0; i < IDT_ENTRIES; i++) default_idt_entries[i] += switcher_offset(); @@ -468,63 +548,81 @@ void __init lguest_arch_host_init(void) for_each_possible_cpu(i) { /* lguest_pages() returns this CPU's two pages. */ struct lguest_pages *pages = lguest_pages(i); - /* This is a convenience pointer to make the code fit one - * statement to a line. */ + /* This is a convenience pointer to make the code neater. */ struct lguest_ro_state *state = &pages->state; - /* The Global Descriptor Table: the Host has a different one + /* + * The Global Descriptor Table: the Host has a different one * for each CPU. We keep a descriptor for the GDT which says * where it is and how big it is (the size is actually the last - * byte, not the size, hence the "-1"). */ + * byte, not the size, hence the "-1"). + */ state->host_gdt_desc.size = GDT_SIZE-1; state->host_gdt_desc.address = (long)get_cpu_gdt_table(i); - /* All CPUs on the Host use the same Interrupt Descriptor + /* + * All CPUs on the Host use the same Interrupt Descriptor * Table, so we just use store_idt(), which gets this CPU's IDT - * descriptor. */ + * descriptor. + */ store_idt(&state->host_idt_desc); - /* The descriptors for the Guest's GDT and IDT can be filled + /* + * The descriptors for the Guest's GDT and IDT can be filled * out now, too. We copy the GDT & IDT into ->guest_gdt and - * ->guest_idt before actually running the Guest. */ + * ->guest_idt before actually running the Guest. + */ state->guest_idt_desc.size = sizeof(state->guest_idt)-1; state->guest_idt_desc.address = (long)&state->guest_idt; state->guest_gdt_desc.size = sizeof(state->guest_gdt)-1; state->guest_gdt_desc.address = (long)&state->guest_gdt; - /* We know where we want the stack to be when the Guest enters + /* + * We know where we want the stack to be when the Guest enters * the Switcher: in pages->regs. The stack grows upwards, so - * we start it at the end of that structure. */ + * we start it at the end of that structure. + */ state->guest_tss.sp0 = (long)(&pages->regs + 1); - /* And this is the GDT entry to use for the stack: we keep a - * couple of special LGUEST entries. */ + /* + * And this is the GDT entry to use for the stack: we keep a + * couple of special LGUEST entries. + */ state->guest_tss.ss0 = LGUEST_DS; - /* x86 can have a finegrained bitmap which indicates what I/O + /* + * x86 can have a finegrained bitmap which indicates what I/O * ports the process can use. We set it to the end of our - * structure, meaning "none". */ + * structure, meaning "none". + */ state->guest_tss.io_bitmap_base = sizeof(state->guest_tss); - /* Some GDT entries are the same across all Guests, so we can - * set them up now. */ + /* + * Some GDT entries are the same across all Guests, so we can + * set them up now. + */ setup_default_gdt_entries(state); /* Most IDT entries are the same for all Guests, too.*/ setup_default_idt_entries(state, default_idt_entries); - /* The Host needs to be able to use the LGUEST segments on this - * CPU, too, so put them in the Host GDT. */ + /* + * The Host needs to be able to use the LGUEST segments on this + * CPU, too, so put them in the Host GDT. + */ get_cpu_gdt_table(i)[GDT_ENTRY_LGUEST_CS] = FULL_EXEC_SEGMENT; get_cpu_gdt_table(i)[GDT_ENTRY_LGUEST_DS] = FULL_SEGMENT; } - /* In the Switcher, we want the %cs segment register to use the + /* + * In the Switcher, we want the %cs segment register to use the * LGUEST_CS GDT entry: we've put that in the Host and Guest GDTs, so * it will be undisturbed when we switch. To change %cs and jump we - * need this structure to feed to Intel's "lcall" instruction. */ + * need this structure to feed to Intel's "lcall" instruction. + */ lguest_entry.offset = (long)switch_to_guest + switcher_offset(); lguest_entry.segment = LGUEST_CS; - /* Finally, we need to turn off "Page Global Enable". PGE is an + /* + * Finally, we need to turn off "Page Global Enable". PGE is an * optimization where page table entries are specially marked to show * they never change. The Host kernel marks all the kernel pages this * way because it's always present, even when userspace is running. @@ -534,16 +632,21 @@ void __init lguest_arch_host_init(void) * you'll get really weird bugs that you'll chase for two days. * * I used to turn PGE off every time we switched to the Guest and back - * on when we return, but that slowed the Switcher down noticibly. */ + * on when we return, but that slowed the Switcher down noticibly. + */ - /* We don't need the complexity of CPUs coming and going while we're - * doing this. */ + /* + * We don't need the complexity of CPUs coming and going while we're + * doing this. + */ get_online_cpus(); if (cpu_has_pge) { /* We have a broader idea of "global". */ /* Remember that this was originally set (for cleanup). */ cpu_had_pge = 1; - /* adjust_pge is a helper function which sets or unsets the PGE - * bit on its CPU, depending on the argument (0 == unset). */ + /* + * adjust_pge is a helper function which sets or unsets the PGE + * bit on its CPU, depending on the argument (0 == unset). + */ on_each_cpu(adjust_pge, (void *)0, 1); /* Turn off the feature in the global feature set. */ clear_cpu_cap(&boot_cpu_data, X86_FEATURE_PGE); @@ -590,26 +693,32 @@ int lguest_arch_init_hypercalls(struct lg_cpu *cpu) { u32 tsc_speed; - /* The pointer to the Guest's "struct lguest_data" is the only argument. - * We check that address now. */ + /* + * The pointer to the Guest's "struct lguest_data" is the only argument. + * We check that address now. + */ if (!lguest_address_ok(cpu->lg, cpu->hcall->arg1, sizeof(*cpu->lg->lguest_data))) return -EFAULT; - /* Having checked it, we simply set lg->lguest_data to point straight + /* + * Having checked it, we simply set lg->lguest_data to point straight * into the Launcher's memory at the right place and then use * copy_to_user/from_user from now on, instead of lgread/write. I put * this in to show that I'm not immune to writing stupid - * optimizations. */ + * optimizations. + */ cpu->lg->lguest_data = cpu->lg->mem_base + cpu->hcall->arg1; - /* We insist that the Time Stamp Counter exist and doesn't change with + /* + * We insist that the Time Stamp Counter exist and doesn't change with * cpu frequency. Some devious chip manufacturers decided that TSC * changes could be handled in software. I decided that time going * backwards might be good for benchmarks, but it's bad for users. * * We also insist that the TSC be stable: the kernel detects unreliable - * TSCs for its own purposes, and we use that here. */ + * TSCs for its own purposes, and we use that here. + */ if (boot_cpu_has(X86_FEATURE_CONSTANT_TSC) && !check_tsc_unstable()) tsc_speed = tsc_khz; else @@ -625,38 +734,47 @@ int lguest_arch_init_hypercalls(struct lg_cpu *cpu) } /*:*/ -/*L:030 lguest_arch_setup_regs() +/*L:030 + * lguest_arch_setup_regs() * * Most of the Guest's registers are left alone: we used get_zeroed_page() to - * allocate the structure, so they will be 0. */ + * allocate the structure, so they will be 0. + */ void lguest_arch_setup_regs(struct lg_cpu *cpu, unsigned long start) { struct lguest_regs *regs = cpu->regs; - /* There are four "segment" registers which the Guest needs to boot: + /* + * There are four "segment" registers which the Guest needs to boot: * The "code segment" register (cs) refers to the kernel code segment * __KERNEL_CS, and the "data", "extra" and "stack" segment registers * refer to the kernel data segment __KERNEL_DS. * * The privilege level is packed into the lower bits. The Guest runs - * at privilege level 1 (GUEST_PL).*/ + * at privilege level 1 (GUEST_PL). + */ regs->ds = regs->es = regs->ss = __KERNEL_DS|GUEST_PL; regs->cs = __KERNEL_CS|GUEST_PL; - /* The "eflags" register contains miscellaneous flags. Bit 1 (0x002) + /* + * The "eflags" register contains miscellaneous flags. Bit 1 (0x002) * is supposed to always be "1". Bit 9 (0x200) controls whether * interrupts are enabled. We always leave interrupts enabled while - * running the Guest. */ + * running the Guest. + */ regs->eflags = X86_EFLAGS_IF | 0x2; - /* The "Extended Instruction Pointer" register says where the Guest is - * running. */ + /* + * The "Extended Instruction Pointer" register says where the Guest is + * running. + */ regs->eip = start; - /* %esi points to our boot information, at physical address 0, so don't - * touch it. */ + /* + * %esi points to our boot information, at physical address 0, so don't + * touch it. + */ - /* There are a couple of GDT entries the Guest expects when first - * booting. */ + /* There are a couple of GDT entries the Guest expects at boot. */ setup_guest_gdt(cpu); } diff --git a/drivers/lguest/x86/switcher_32.S b/drivers/lguest/x86/switcher_32.S index 3fc15318a80..6dec0979383 100644 --- a/drivers/lguest/x86/switcher_32.S +++ b/drivers/lguest/x86/switcher_32.S @@ -1,12 +1,15 @@ -/*P:900 This is the Switcher: code which sits at 0xFFC00000 astride both the +/*P:900 + * This is the Switcher: code which sits at 0xFFC00000 astride both the * Host and Guest to do the low-level Guest<->Host switch. It is as simple as * it can be made, but it's naturally very specific to x86. * * You have now completed Preparation. If this has whet your appetite; if you * are feeling invigorated and refreshed then the next, more challenging stage - * can be found in "make Guest". :*/ + * can be found in "make Guest". + :*/ -/*M:012 Lguest is meant to be simple: my rule of thumb is that 1% more LOC must +/*M:012 + * Lguest is meant to be simple: my rule of thumb is that 1% more LOC must * gain at least 1% more performance. Since neither LOC nor performance can be * measured beforehand, it generally means implementing a feature then deciding * if it's worth it. And once it's implemented, who can say no? @@ -31,11 +34,14 @@ * Host (which is actually really easy). * * Two questions remain. Would the performance gain outweigh the complexity? - * And who would write the verse documenting it? :*/ + * And who would write the verse documenting it? +:*/ -/*M:011 Lguest64 handles NMI. This gave me NMI envy (until I looked at their +/*M:011 + * Lguest64 handles NMI. This gave me NMI envy (until I looked at their * code). It's worth doing though, since it would let us use oprofile in the - * Host when a Guest is running. :*/ + * Host when a Guest is running. +:*/ /*S:100 * Welcome to the Switcher itself! diff --git a/include/linux/lguest.h b/include/linux/lguest.h index dbf2479e808..0a3a11afd64 100644 --- a/include/linux/lguest.h +++ b/include/linux/lguest.h @@ -1,5 +1,7 @@ -/* Things the lguest guest needs to know. Note: like all lguest interfaces, - * this is subject to wild and random change between versions. */ +/* + * Things the lguest guest needs to know. Note: like all lguest interfaces, + * this is subject to wild and random change between versions. + */ #ifndef _LINUX_LGUEST_H #define _LINUX_LGUEST_H @@ -11,32 +13,42 @@ #define LG_CLOCK_MIN_DELTA 100UL #define LG_CLOCK_MAX_DELTA ULONG_MAX -/*G:031 The second method of communicating with the Host is to via "struct +/*G:031 + * The second method of communicating with the Host is to via "struct * lguest_data". Once the Guest's initialization hypercall tells the Host where - * this is, the Guest and Host both publish information in it. :*/ + * this is, the Guest and Host both publish information in it. +:*/ struct lguest_data { - /* 512 == enabled (same as eflags in normal hardware). The Guest - * changes interrupts so often that a hypercall is too slow. */ + /* + * 512 == enabled (same as eflags in normal hardware). The Guest + * changes interrupts so often that a hypercall is too slow. + */ unsigned int irq_enabled; /* Fine-grained interrupt disabling by the Guest */ DECLARE_BITMAP(blocked_interrupts, LGUEST_IRQS); - /* The Host writes the virtual address of the last page fault here, + /* + * The Host writes the virtual address of the last page fault here, * which saves the Guest a hypercall. CR2 is the native register where - * this address would normally be found. */ + * this address would normally be found. + */ unsigned long cr2; /* Wallclock time set by the Host. */ struct timespec time; - /* Interrupt pending set by the Host. The Guest should do a hypercall - * if it re-enables interrupts and sees this set (to X86_EFLAGS_IF). */ + /* + * Interrupt pending set by the Host. The Guest should do a hypercall + * if it re-enables interrupts and sees this set (to X86_EFLAGS_IF). + */ int irq_pending; - /* Async hypercall ring. Instead of directly making hypercalls, we can + /* + * Async hypercall ring. Instead of directly making hypercalls, we can * place them in here for processing the next time the Host wants. - * This batching can be quite efficient. */ + * This batching can be quite efficient. + */ /* 0xFF == done (set by Host), 0 == pending (set by Guest). */ u8 hcall_status[LHCALL_RING_SIZE]; diff --git a/include/linux/lguest_launcher.h b/include/linux/lguest_launcher.h index bfefbdf7498..495203ff221 100644 --- a/include/linux/lguest_launcher.h +++ b/include/linux/lguest_launcher.h @@ -29,8 +29,10 @@ struct lguest_device_desc { __u8 type; /* The number of virtqueues (first in config array) */ __u8 num_vq; - /* The number of bytes of feature bits. Multiply by 2: one for host - * features and one for Guest acknowledgements. */ + /* + * The number of bytes of feature bits. Multiply by 2: one for host + * features and one for Guest acknowledgements. + */ __u8 feature_len; /* The number of bytes of the config array after virtqueues. */ __u8 config_len; @@ -39,8 +41,10 @@ struct lguest_device_desc { __u8 config[0]; }; -/*D:135 This is how we expect the device configuration field for a virtqueue - * to be laid out in config space. */ +/*D:135 + * This is how we expect the device configuration field for a virtqueue + * to be laid out in config space. + */ struct lguest_vqconfig { /* The number of entries in the virtio_ring */ __u16 num; @@ -61,7 +65,9 @@ enum lguest_req LHREQ_EVENTFD, /* + address, fd. */ }; -/* The alignment to use between consumer and producer parts of vring. - * x86 pagesize for historical reasons. */ +/* + * The alignment to use between consumer and producer parts of vring. + * x86 pagesize for historical reasons. + */ #define LGUEST_VRING_ALIGN 4096 #endif /* _LINUX_LGUEST_LAUNCHER */ -- cgit v1.2.3 From a91d74a3c4de8115295ee87350c13a329164aaaf Mon Sep 17 00:00:00 2001 From: Rusty Russell Date: Thu, 30 Jul 2009 16:03:45 -0600 Subject: lguest: update commentry Every so often, after code shuffles, I need to go through and unbitrot the Lguest Journey (see drivers/lguest/README). Since we now use RCU in a simple form in one place I took the opportunity to expand that explanation. Signed-off-by: Rusty Russell Cc: Ingo Molnar Cc: Paul McKenney --- Documentation/lguest/lguest.c | 184 +++++++++++++++++++++++++++--------- arch/x86/include/asm/lguest_hcall.h | 8 +- arch/x86/lguest/boot.c | 99 ++++++++++++++----- arch/x86/lguest/i386_head.S | 2 + drivers/lguest/core.c | 7 +- drivers/lguest/hypercalls.c | 6 +- drivers/lguest/lguest_device.c | 11 ++- drivers/lguest/lguest_user.c | 100 ++++++++++++++++++-- drivers/lguest/page_tables.c | 84 ++++++++++++---- drivers/lguest/x86/core.c | 2 +- drivers/lguest/x86/switcher_32.S | 6 +- 11 files changed, 398 insertions(+), 111 deletions(-) diff --git a/Documentation/lguest/lguest.c b/Documentation/lguest/lguest.c index aa66a52b73e..45163651b51 100644 --- a/Documentation/lguest/lguest.c +++ b/Documentation/lguest/lguest.c @@ -49,7 +49,7 @@ #include "linux/virtio_ring.h" #include "asm/bootparam.h" /*L:110 - * We can ignore the 39 include files we need for this program, but I do want + * We can ignore the 42 include files we need for this program, but I do want * to draw attention to the use of kernel-style types. * * As Linus said, "C is a Spartan language, and so should your naming be." I @@ -305,6 +305,11 @@ static void *map_zeroed_pages(unsigned int num) PROT_READ|PROT_WRITE|PROT_EXEC, MAP_PRIVATE, fd, 0); if (addr == MAP_FAILED) err(1, "Mmaping %u pages of /dev/zero", num); + + /* + * One neat mmap feature is that you can close the fd, and it + * stays mapped. + */ close(fd); return addr; @@ -557,7 +562,7 @@ static void tell_kernel(unsigned long start) } /*:*/ -/* +/*L:200 * Device Handling. * * When the Guest gives us a buffer, it sends an array of addresses and sizes. @@ -608,7 +613,10 @@ static unsigned next_desc(struct vring_desc *desc, return next; } -/* This actually sends the interrupt for this virtqueue */ +/* + * This actually sends the interrupt for this virtqueue, if we've used a + * buffer. + */ static void trigger_irq(struct virtqueue *vq) { unsigned long buf[] = { LHREQ_IRQ, vq->config.irq }; @@ -629,12 +637,12 @@ static void trigger_irq(struct virtqueue *vq) } /* - * This looks in the virtqueue and for the first available buffer, and converts + * This looks in the virtqueue for the first available buffer, and converts * it to an iovec for convenient access. Since descriptors consist of some * number of output then some number of input descriptors, it's actually two * iovecs, but we pack them into one and note how many of each there were. * - * This function returns the descriptor number found. + * This function waits if necessary, and returns the descriptor number found. */ static unsigned wait_for_vq_desc(struct virtqueue *vq, struct iovec iov[], @@ -644,10 +652,14 @@ static unsigned wait_for_vq_desc(struct virtqueue *vq, struct vring_desc *desc; u16 last_avail = lg_last_avail(vq); + /* There's nothing available? */ while (last_avail == vq->vring.avail->idx) { u64 event; - /* OK, tell Guest about progress up to now. */ + /* + * Since we're about to sleep, now is a good time to tell the + * Guest about what we've used up to now. + */ trigger_irq(vq); /* OK, now we need to know about added descriptors. */ @@ -734,8 +746,9 @@ static unsigned wait_for_vq_desc(struct virtqueue *vq, } /* - * After we've used one of their buffers, we tell them about it. We'll then - * want to send them an interrupt, using trigger_irq(). + * After we've used one of their buffers, we tell the Guest about it. Sometime + * later we'll want to send them an interrupt using trigger_irq(); note that + * wait_for_vq_desc() does that for us if it has to wait. */ static void add_used(struct virtqueue *vq, unsigned int head, int len) { @@ -782,12 +795,12 @@ static void console_input(struct virtqueue *vq) struct console_abort *abort = vq->dev->priv; struct iovec iov[vq->vring.num]; - /* Make sure there's a descriptor waiting. */ + /* Make sure there's a descriptor available. */ head = wait_for_vq_desc(vq, iov, &out_num, &in_num); if (out_num) errx(1, "Output buffers in console in queue?"); - /* Read it in. */ + /* Read into it. This is where we usually wait. */ len = readv(STDIN_FILENO, iov, in_num); if (len <= 0) { /* Ran out of input? */ @@ -800,6 +813,7 @@ static void console_input(struct virtqueue *vq) pause(); } + /* Tell the Guest we used a buffer. */ add_used_and_trigger(vq, head, len); /* @@ -834,15 +848,23 @@ static void console_output(struct virtqueue *vq) unsigned int head, out, in; struct iovec iov[vq->vring.num]; + /* We usually wait in here, for the Guest to give us something. */ head = wait_for_vq_desc(vq, iov, &out, &in); if (in) errx(1, "Input buffers in console output queue?"); + + /* writev can return a partial write, so we loop here. */ while (!iov_empty(iov, out)) { int len = writev(STDOUT_FILENO, iov, out); if (len <= 0) err(1, "Write to stdout gave %i", len); iov_consume(iov, out, len); } + + /* + * We're finished with that buffer: if we're going to sleep, + * wait_for_vq_desc() will prod the Guest with an interrupt. + */ add_used(vq, head, 0); } @@ -862,15 +884,30 @@ static void net_output(struct virtqueue *vq) unsigned int head, out, in; struct iovec iov[vq->vring.num]; + /* We usually wait in here for the Guest to give us a packet. */ head = wait_for_vq_desc(vq, iov, &out, &in); if (in) errx(1, "Input buffers in net output queue?"); + /* + * Send the whole thing through to /dev/net/tun. It expects the exact + * same format: what a coincidence! + */ if (writev(net_info->tunfd, iov, out) < 0) errx(1, "Write to tun failed?"); + + /* + * Done with that one; wait_for_vq_desc() will send the interrupt if + * all packets are processed. + */ add_used(vq, head, 0); } -/* Will reading from this file descriptor block? */ +/* + * Handling network input is a bit trickier, because I've tried to optimize it. + * + * First we have a helper routine which tells is if from this file descriptor + * (ie. the /dev/net/tun device) will block: + */ static bool will_block(int fd) { fd_set fdset; @@ -880,7 +917,11 @@ static bool will_block(int fd) return select(fd+1, &fdset, NULL, NULL, &zero) != 1; } -/* This handles packets coming in from the tun device to our Guest. */ +/* + * This handles packets coming in from the tun device to our Guest. Like all + * service routines, it gets called again as soon as it returns, so you don't + * see a while(1) loop here. + */ static void net_input(struct virtqueue *vq) { int len; @@ -888,21 +929,38 @@ static void net_input(struct virtqueue *vq) struct iovec iov[vq->vring.num]; struct net_info *net_info = vq->dev->priv; + /* + * Get a descriptor to write an incoming packet into. This will also + * send an interrupt if they're out of descriptors. + */ head = wait_for_vq_desc(vq, iov, &out, &in); if (out) errx(1, "Output buffers in net input queue?"); - /* Deliver interrupt now, since we're about to sleep. */ + /* + * If it looks like we'll block reading from the tun device, send them + * an interrupt. + */ if (vq->pending_used && will_block(net_info->tunfd)) trigger_irq(vq); + /* + * Read in the packet. This is where we normally wait (when there's no + * incoming network traffic). + */ len = readv(net_info->tunfd, iov, in); if (len <= 0) err(1, "Failed to read from tun."); + + /* + * Mark that packet buffer as used, but don't interrupt here. We want + * to wait until we've done as much work as we can. + */ add_used(vq, head, len); } +/*:*/ -/* This is the helper to create threads. */ +/* This is the helper to create threads: run the service routine in a loop. */ static int do_thread(void *_vq) { struct virtqueue *vq = _vq; @@ -950,11 +1008,14 @@ static void reset_device(struct device *dev) signal(SIGCHLD, (void *)kill_launcher); } +/*L:216 + * This actually creates the thread which services the virtqueue for a device. + */ static void create_thread(struct virtqueue *vq) { /* - * Create stack for thread and run it. Since the stack grows upwards, - * we point the stack pointer to the end of this region. + * Create stack for thread. Since the stack grows upwards, we point + * the stack pointer to the end of this region. */ char *stack = malloc(32768); unsigned long args[] = { LHREQ_EVENTFD, @@ -966,17 +1027,22 @@ static void create_thread(struct virtqueue *vq) err(1, "Creating eventfd"); args[2] = vq->eventfd; - /* Attach an eventfd to this virtqueue: it will go off - * when the Guest does an LHCALL_NOTIFY for this vq. */ + /* + * Attach an eventfd to this virtqueue: it will go off when the Guest + * does an LHCALL_NOTIFY for this vq. + */ if (write(lguest_fd, &args, sizeof(args)) != 0) err(1, "Attaching eventfd"); - /* CLONE_VM: because it has to access the Guest memory, and - * SIGCHLD so we get a signal if it dies. */ + /* + * CLONE_VM: because it has to access the Guest memory, and SIGCHLD so + * we get a signal if it dies. + */ vq->thread = clone(do_thread, stack + 32768, CLONE_VM | SIGCHLD, vq); if (vq->thread == (pid_t)-1) err(1, "Creating clone"); - /* We close our local copy, now the child has it. */ + + /* We close our local copy now the child has it. */ close(vq->eventfd); } @@ -1028,7 +1094,10 @@ static void update_device_status(struct device *dev) } } -/* This is the generic routine we call when the Guest uses LHCALL_NOTIFY. */ +/*L:215 + * This is the generic routine we call when the Guest uses LHCALL_NOTIFY. In + * particular, it's used to notify us of device status changes during boot. + */ static void handle_output(unsigned long addr) { struct device *i; @@ -1037,18 +1106,32 @@ static void handle_output(unsigned long addr) for (i = devices.dev; i; i = i->next) { struct virtqueue *vq; - /* Notifications to device descriptors update device status. */ + /* + * Notifications to device descriptors mean they updated the + * device status. + */ if (from_guest_phys(addr) == i->desc) { update_device_status(i); return; } - /* Devices *can* be used before status is set to DRIVER_OK. */ + /* + * Devices *can* be used before status is set to DRIVER_OK. + * The original plan was that they would never do this: they + * would always finish setting up their status bits before + * actually touching the virtqueues. In practice, we allowed + * them to, and they do (eg. the disk probes for partition + * tables as part of initialization). + * + * If we see this, we start the device: once it's running, we + * expect the device to catch all the notifications. + */ for (vq = i->vq; vq; vq = vq->next) { if (addr != vq->config.pfn*getpagesize()) continue; if (i->running) errx(1, "Notification on running %s", i->name); + /* This just calls create_thread() for each virtqueue */ start_device(i); return; } @@ -1132,6 +1215,11 @@ static void add_virtqueue(struct device *dev, unsigned int num_descs, vq->next = NULL; vq->last_avail_idx = 0; vq->dev = dev; + + /* + * This is the routine the service thread will run, and its Process ID + * once it's running. + */ vq->service = service; vq->thread = (pid_t)-1; @@ -1202,7 +1290,8 @@ static void set_config(struct device *dev, unsigned len, const void *conf) /* * This routine does all the creation and setup of a new device, including - * calling new_dev_desc() to allocate the descriptor and device memory. + * calling new_dev_desc() to allocate the descriptor and device memory. We + * don't actually start the service threads until later. * * See what I mean about userspace being boring? */ @@ -1478,19 +1567,7 @@ static void setup_tun_net(char *arg) verbose("device %u: tun %s: %s\n", devices.device_num, tapif, arg); } - -/* - * Our block (disk) device should be really simple: the Guest asks for a block - * number and we read or write that position in the file. Unfortunately, that - * was amazingly slow: the Guest waits until the read is finished before - * running anything else, even if it could have been doing useful work. - * - * We could use async I/O, except it's reputed to suck so hard that characters - * actually go missing from your code when you try to use it. - * - * So this was one reason why lguest now does all virtqueue servicing in - * separate threads: it's more efficient and more like a real device. - */ +/*:*/ /* This hangs off device->priv. */ struct vblk_info @@ -1512,8 +1589,16 @@ struct vblk_info /*L:210 * The Disk * - * Remember that the block device is handled by a separate I/O thread. We head - * straight into the core of that thread here: + * The disk only has one virtqueue, so it only has one thread. It is really + * simple: the Guest asks for a block number and we read or write that position + * in the file. + * + * Before we serviced each virtqueue in a separate thread, that was unacceptably + * slow: the Guest waits until the read is finished before running anything + * else, even if it could have been doing useful work. + * + * We could have used async I/O, except it's reputed to suck so hard that + * characters actually go missing from your code when you try to use it. */ static void blk_request(struct virtqueue *vq) { @@ -1525,7 +1610,10 @@ static void blk_request(struct virtqueue *vq) struct iovec iov[vq->vring.num]; off64_t off; - /* Get the next request. */ + /* + * Get the next request, where we normally wait. It triggers the + * interrupt to acknowledge previously serviced requests (if any). + */ head = wait_for_vq_desc(vq, iov, &out_num, &in_num); /* @@ -1539,6 +1627,10 @@ static void blk_request(struct virtqueue *vq) out = convert(&iov[0], struct virtio_blk_outhdr); in = convert(&iov[out_num+in_num-1], u8); + /* + * For historical reasons, block operations are expressed in 512 byte + * "sectors". + */ off = out->sector * 512; /* @@ -1614,6 +1706,7 @@ static void blk_request(struct virtqueue *vq) if (out->type & VIRTIO_BLK_T_BARRIER) fdatasync(vblk->fd); + /* Finished that request. */ add_used(vq, head, wlen); } @@ -1682,9 +1775,8 @@ static void rng_input(struct virtqueue *vq) errx(1, "Output buffers in rng?"); /* - * This is why we convert to iovecs: the readv() call uses them, and so - * it reads straight into the Guest's buffer. We loop to make sure we - * fill it. + * Just like the console write, we loop to cover the whole iovec. + * In this case, short reads actually happen quite a bit. */ while (!iov_empty(iov, in_num)) { len = readv(rng_info->rfd, iov, in_num); @@ -1818,7 +1910,9 @@ int main(int argc, char *argv[]) devices.lastdev = NULL; devices.next_irq = 1; + /* We're CPU 0. In fact, that's the only CPU possible right now. */ cpu_id = 0; + /* * We need to know how much memory so we can set up the device * descriptor and memory pages for the devices as we parse the command @@ -1926,7 +2020,7 @@ int main(int argc, char *argv[]) */ tell_kernel(start); - /* Ensure that we terminate if a child dies. */ + /* Ensure that we terminate if a device-servicing child dies. */ signal(SIGCHLD, kill_launcher); /* If we exit via err(), this kills all the threads, restores tty. */ diff --git a/arch/x86/include/asm/lguest_hcall.h b/arch/x86/include/asm/lguest_hcall.h index cceb73e12e5..ba0eed8aa1a 100644 --- a/arch/x86/include/asm/lguest_hcall.h +++ b/arch/x86/include/asm/lguest_hcall.h @@ -35,10 +35,10 @@ * operations? There are two ways: the direct way is to make a "hypercall", * to make requests of the Host Itself. * - * We use the KVM hypercall mechanism. Seventeen hypercalls are - * available: the hypercall number is put in the %eax register, and the - * arguments (when required) are placed in %ebx, %ecx, %edx and %esi. - * If a return value makes sense, it's returned in %eax. + * We use the KVM hypercall mechanism, though completely different hypercall + * numbers. Seventeen hypercalls are available: the hypercall number is put in + * the %eax register, and the arguments (when required) are placed in %ebx, + * %ecx, %edx and %esi. If a return value makes sense, it's returned in %eax. * * Grossly invalid calls result in Sudden Death at the hands of the vengeful * Host, rather than returning failure. This reflects Winston Churchill's diff --git a/arch/x86/lguest/boot.c b/arch/x86/lguest/boot.c index 025c04d18f2..d677fa9ca65 100644 --- a/arch/x86/lguest/boot.c +++ b/arch/x86/lguest/boot.c @@ -154,6 +154,7 @@ static void lazy_hcall1(unsigned long call, async_hcall(call, arg1, 0, 0, 0); } +/* You can imagine what lazy_hcall2, 3 and 4 look like. :*/ static void lazy_hcall2(unsigned long call, unsigned long arg1, unsigned long arg2) @@ -189,8 +190,10 @@ static void lazy_hcall4(unsigned long call, } #endif -/* When lazy mode is turned off reset the per-cpu lazy mode variable and then - * issue the do-nothing hypercall to flush any stored calls. */ +/*G:036 + * When lazy mode is turned off reset the per-cpu lazy mode variable and then + * issue the do-nothing hypercall to flush any stored calls. +:*/ static void lguest_leave_lazy_mmu_mode(void) { kvm_hypercall0(LHCALL_FLUSH_ASYNC); @@ -250,13 +253,11 @@ extern void lg_irq_enable(void); extern void lg_restore_fl(unsigned long flags); /*M:003 - * Note that we don't check for outstanding interrupts when we re-enable them - * (or when we unmask an interrupt). This seems to work for the moment, since - * interrupts are rare and we'll just get the interrupt on the next timer tick, - * but now we can run with CONFIG_NO_HZ, we should revisit this. One way would - * be to put the "irq_enabled" field in a page by itself, and have the Host - * write-protect it when an interrupt comes in when irqs are disabled. There - * will then be a page fault as soon as interrupts are re-enabled. + * We could be more efficient in our checking of outstanding interrupts, rather + * than using a branch. One way would be to put the "irq_enabled" field in a + * page by itself, and have the Host write-protect it when an interrupt comes + * in when irqs are disabled. There will then be a page fault as soon as + * interrupts are re-enabled. * * A better method is to implement soft interrupt disable generally for x86: * instead of disabling interrupts, we set a flag. If an interrupt does come @@ -568,7 +569,7 @@ static void lguest_write_cr4(unsigned long val) * cr3 ---> +---------+ * | --------->+---------+ * | | | PADDR1 | - * Top-level | | PADDR2 | + * Mid-level | | PADDR2 | * (PMD) page | | | * | | Lower-level | * | | (PTE) page | @@ -588,23 +589,62 @@ static void lguest_write_cr4(unsigned long val) * Index into top Index into second Offset within page * page directory page pagetable page * - * The kernel spends a lot of time changing both the top-level page directory - * and lower-level pagetable pages. The Guest doesn't know physical addresses, - * so while it maintains these page tables exactly like normal, it also needs - * to keep the Host informed whenever it makes a change: the Host will create - * the real page tables based on the Guests'. + * Now, unfortunately, this isn't the whole story: Intel added Physical Address + * Extension (PAE) to allow 32 bit systems to use 64GB of memory (ie. 36 bits). + * These are held in 64-bit page table entries, so we can now only fit 512 + * entries in a page, and the neat three-level tree breaks down. + * + * The result is a four level page table: + * + * cr3 --> [ 4 Upper ] + * [ Level ] + * [ Entries ] + * [(PUD Page)]---> +---------+ + * | --------->+---------+ + * | | | PADDR1 | + * Mid-level | | PADDR2 | + * (PMD) page | | | + * | | Lower-level | + * | | (PTE) page | + * | | | | + * .... .... + * + * + * And the virtual address is decoded as: + * + * 1 1 0 0 0 0 0 0 0 0 0 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 + * |<-2->|<--- 9 bits ---->|<---- 9 bits --->|<------ 12 bits ------>| + * Index into Index into mid Index into lower Offset within page + * top entries directory page pagetable page + * + * It's too hard to switch between these two formats at runtime, so Linux only + * supports one or the other depending on whether CONFIG_X86_PAE is set. Many + * distributions turn it on, and not just for people with silly amounts of + * memory: the larger PTE entries allow room for the NX bit, which lets the + * kernel disable execution of pages and increase security. + * + * This was a problem for lguest, which couldn't run on these distributions; + * then Matias Zabaljauregui figured it all out and implemented it, and only a + * handful of puppies were crushed in the process! + * + * Back to our point: the kernel spends a lot of time changing both the + * top-level page directory and lower-level pagetable pages. The Guest doesn't + * know physical addresses, so while it maintains these page tables exactly + * like normal, it also needs to keep the Host informed whenever it makes a + * change: the Host will create the real page tables based on the Guests'. */ /* - * The Guest calls this to set a second-level entry (pte), ie. to map a page - * into a process' address space. We set the entry then tell the Host the - * toplevel and address this corresponds to. The Guest uses one pagetable per - * process, so we need to tell the Host which one we're changing (mm->pgd). + * The Guest calls this after it has set a second-level entry (pte), ie. to map + * a page into a process' address space. Wetell the Host the toplevel and + * address this corresponds to. The Guest uses one pagetable per process, so + * we need to tell the Host which one we're changing (mm->pgd). */ static void lguest_pte_update(struct mm_struct *mm, unsigned long addr, pte_t *ptep) { #ifdef CONFIG_X86_PAE + /* PAE needs to hand a 64 bit page table entry, so it uses two args. */ lazy_hcall4(LHCALL_SET_PTE, __pa(mm->pgd), addr, ptep->pte_low, ptep->pte_high); #else @@ -612,6 +652,7 @@ static void lguest_pte_update(struct mm_struct *mm, unsigned long addr, #endif } +/* This is the "set and update" combo-meal-deal version. */ static void lguest_set_pte_at(struct mm_struct *mm, unsigned long addr, pte_t *ptep, pte_t pteval) { @@ -672,6 +713,11 @@ static void lguest_set_pte(pte_t *ptep, pte_t pteval) } #ifdef CONFIG_X86_PAE +/* + * With 64-bit PTE values, we need to be careful setting them: if we set 32 + * bits at a time, the hardware could see a weird half-set entry. These + * versions ensure we update all 64 bits at once. + */ static void lguest_set_pte_atomic(pte_t *ptep, pte_t pte) { native_set_pte_atomic(ptep, pte); @@ -679,13 +725,14 @@ static void lguest_set_pte_atomic(pte_t *ptep, pte_t pte) lazy_hcall1(LHCALL_FLUSH_TLB, 1); } -void lguest_pte_clear(struct mm_struct *mm, unsigned long addr, pte_t *ptep) +static void lguest_pte_clear(struct mm_struct *mm, unsigned long addr, + pte_t *ptep) { native_pte_clear(mm, addr, ptep); lguest_pte_update(mm, addr, ptep); } -void lguest_pmd_clear(pmd_t *pmdp) +static void lguest_pmd_clear(pmd_t *pmdp) { lguest_set_pmd(pmdp, __pmd(0)); } @@ -784,6 +831,14 @@ static void __init lguest_init_IRQ(void) irq_ctx_init(smp_processor_id()); } +/* + * With CONFIG_SPARSE_IRQ, interrupt descriptors are allocated as-needed, so + * rather than set them in lguest_init_IRQ we are called here every time an + * lguest device needs an interrupt. + * + * FIXME: irq_to_desc_alloc_node() can fail due to lack of memory, we should + * pass that up! + */ void lguest_setup_irq(unsigned int irq) { irq_to_desc_alloc_node(irq, 0); @@ -1298,7 +1353,7 @@ __init void lguest_init(void) */ switch_to_new_gdt(0); - /* As described in head_32.S, we map the first 128M of memory. */ + /* We actually boot with all memory mapped, but let's say 128MB. */ max_pfn_mapped = (128*1024*1024) >> PAGE_SHIFT; /* diff --git a/arch/x86/lguest/i386_head.S b/arch/x86/lguest/i386_head.S index db6aa95eb05..27eac0faee4 100644 --- a/arch/x86/lguest/i386_head.S +++ b/arch/x86/lguest/i386_head.S @@ -102,6 +102,7 @@ send_interrupts: * create one manually here. */ .byte 0x0f,0x01,0xc1 /* KVM_HYPERCALL */ + /* Put eax back the way we found it. */ popl %eax ret @@ -125,6 +126,7 @@ ENTRY(lg_restore_fl) jnz send_interrupts /* Again, the normal path has used no extra registers. Clever, huh? */ ret +/*:*/ /* These demark the EIP range where host should never deliver interrupts. */ .global lguest_noirq_start diff --git a/drivers/lguest/core.c b/drivers/lguest/core.c index cd058bc903f..1e2cb846b3c 100644 --- a/drivers/lguest/core.c +++ b/drivers/lguest/core.c @@ -217,10 +217,15 @@ int run_guest(struct lg_cpu *cpu, unsigned long __user *user) /* * It's possible the Guest did a NOTIFY hypercall to the - * Launcher, in which case we return from the read() now. + * Launcher. */ if (cpu->pending_notify) { + /* + * Does it just needs to write to a registered + * eventfd (ie. the appropriate virtqueue thread)? + */ if (!send_notify_to_eventfd(cpu)) { + /* OK, we tell the main Laucher. */ if (put_user(cpu->pending_notify, user)) return -EFAULT; return sizeof(cpu->pending_notify); diff --git a/drivers/lguest/hypercalls.c b/drivers/lguest/hypercalls.c index 787ab4bc09f..83511eb0923 100644 --- a/drivers/lguest/hypercalls.c +++ b/drivers/lguest/hypercalls.c @@ -59,7 +59,7 @@ static void do_hcall(struct lg_cpu *cpu, struct hcall_args *args) case LHCALL_SHUTDOWN: { char msg[128]; /* - * Shutdown is such a trivial hypercall that we do it in four + * Shutdown is such a trivial hypercall that we do it in five * lines right here. * * If the lgread fails, it will call kill_guest() itself; the @@ -245,6 +245,10 @@ static void initialize(struct lg_cpu *cpu) * device), the Guest will still see the old page. In practice, this never * happens: why would the Guest read a page which it has never written to? But * a similar scenario might one day bite us, so it's worth mentioning. + * + * Note that if we used a shared anonymous mapping in the Launcher instead of + * mapping /dev/zero private, we wouldn't worry about cop-on-write. And we + * need that to switch the Launcher to processes (away from threads) anyway. :*/ /*H:100 diff --git a/drivers/lguest/lguest_device.c b/drivers/lguest/lguest_device.c index cc000e79c3d..1401c1ace1e 100644 --- a/drivers/lguest/lguest_device.c +++ b/drivers/lguest/lguest_device.c @@ -236,7 +236,7 @@ static void lg_notify(struct virtqueue *vq) extern void lguest_setup_irq(unsigned int irq); /* - * This routine finds the first virtqueue described in the configuration of + * This routine finds the Nth virtqueue described in the configuration of * this device and sets it up. * * This is kind of an ugly duckling. It'd be nicer to have a standard @@ -244,9 +244,6 @@ extern void lguest_setup_irq(unsigned int irq); * everyone wants to do it differently. The KVM coders want the Guest to * allocate its own pages and tell the Host where they are, but for lguest it's * simpler for the Host to simply tell us where the pages are. - * - * So we provide drivers with a "find the Nth virtqueue and set it up" - * function. */ static struct virtqueue *lg_find_vq(struct virtio_device *vdev, unsigned index, @@ -422,7 +419,11 @@ static void add_lguest_device(struct lguest_device_desc *d, /* This devices' parent is the lguest/ dir. */ ldev->vdev.dev.parent = lguest_root; - /* We have a unique device index thanks to the dev_index counter. */ + /* + * The device type comes straight from the descriptor. There's also a + * device vendor field in the virtio_device struct, which we leave as + * 0. + */ ldev->vdev.id.device = d->type; /* * We have a simple set of routines for querying the device's diff --git a/drivers/lguest/lguest_user.c b/drivers/lguest/lguest_user.c index 7e92017103d..b4d3f7ca554 100644 --- a/drivers/lguest/lguest_user.c +++ b/drivers/lguest/lguest_user.c @@ -1,9 +1,8 @@ -/*P:200 - * This contains all the /dev/lguest code, whereby the userspace launcher +/*P:200 This contains all the /dev/lguest code, whereby the userspace launcher * controls and communicates with the Guest. For example, the first write will - * tell us the Guest's memory layout, pagetable, entry point and kernel address - * offset. A read will run the Guest until something happens, such as a signal - * or the Guest doing a NOTIFY out to the Launcher. + * tell us the Guest's memory layout and entry point. A read will run the + * Guest until something happens, such as a signal or the Guest doing a NOTIFY + * out to the Launcher. :*/ #include #include @@ -13,14 +12,41 @@ #include #include "lg.h" +/*L:056 + * Before we move on, let's jump ahead and look at what the kernel does when + * it needs to look up the eventfds. That will complete our picture of how we + * use RCU. + * + * The notification value is in cpu->pending_notify: we return true if it went + * to an eventfd. + */ bool send_notify_to_eventfd(struct lg_cpu *cpu) { unsigned int i; struct lg_eventfd_map *map; - /* lg->eventfds is RCU-protected */ + /* + * This "rcu_read_lock()" helps track when someone is still looking at + * the (RCU-using) eventfds array. It's not actually a lock at all; + * indeed it's a noop in many configurations. (You didn't expect me to + * explain all the RCU secrets here, did you?) + */ rcu_read_lock(); + /* + * rcu_dereference is the counter-side of rcu_assign_pointer(); it + * makes sure we don't access the memory pointed to by + * cpu->lg->eventfds before cpu->lg->eventfds is set. Sounds crazy, + * but Alpha allows this! Paul McKenney points out that a really + * aggressive compiler could have the same effect: + * http://lists.ozlabs.org/pipermail/lguest/2009-July/001560.html + * + * So play safe, use rcu_dereference to get the rcu-protected pointer: + */ map = rcu_dereference(cpu->lg->eventfds); + /* + * Simple array search: even if they add an eventfd while we do this, + * we'll continue to use the old array and just won't see the new one. + */ for (i = 0; i < map->num; i++) { if (map->map[i].addr == cpu->pending_notify) { eventfd_signal(map->map[i].event, 1); @@ -28,14 +54,43 @@ bool send_notify_to_eventfd(struct lg_cpu *cpu) break; } } + /* We're done with the rcu-protected variable cpu->lg->eventfds. */ rcu_read_unlock(); + + /* If we cleared the notification, it's because we found a match. */ return cpu->pending_notify == 0; } +/*L:055 + * One of the more tricksy tricks in the Linux Kernel is a technique called + * Read Copy Update. Since one point of lguest is to teach lguest journeyers + * about kernel coding, I use it here. (In case you're curious, other purposes + * include learning about virtualization and instilling a deep appreciation for + * simplicity and puppies). + * + * We keep a simple array which maps LHCALL_NOTIFY values to eventfds, but we + * add new eventfds without ever blocking readers from accessing the array. + * The current Launcher only does this during boot, so that never happens. But + * Read Copy Update is cool, and adding a lock risks damaging even more puppies + * than this code does. + * + * We allocate a brand new one-larger array, copy the old one and add our new + * element. Then we make the lg eventfd pointer point to the new array. + * That's the easy part: now we need to free the old one, but we need to make + * sure no slow CPU somewhere is still looking at it. That's what + * synchronize_rcu does for us: waits until every CPU has indicated that it has + * moved on to know it's no longer using the old one. + * + * If that's unclear, see http://en.wikipedia.org/wiki/Read-copy-update. + */ static int add_eventfd(struct lguest *lg, unsigned long addr, int fd) { struct lg_eventfd_map *new, *old = lg->eventfds; + /* + * We don't allow notifications on value 0 anyway (pending_notify of + * 0 means "nothing pending"). + */ if (!addr) return -EINVAL; @@ -62,12 +117,20 @@ static int add_eventfd(struct lguest *lg, unsigned long addr, int fd) } new->num++; - /* Now put new one in place. */ + /* + * Now put new one in place: rcu_assign_pointer() is a fancy way of + * doing "lg->eventfds = new", but it uses memory barriers to make + * absolutely sure that the contents of "new" written above is nailed + * down before we actually do the assignment. + * + * We have to think about these kinds of things when we're operating on + * live data without locks. + */ rcu_assign_pointer(lg->eventfds, new); /* * We're not in a big hurry. Wait until noone's looking at old - * version, then delete it. + * version, then free it. */ synchronize_rcu(); kfree(old); @@ -75,6 +138,14 @@ static int add_eventfd(struct lguest *lg, unsigned long addr, int fd) return 0; } +/*L:052 + * Receiving notifications from the Guest is usually done by attaching a + * particular LHCALL_NOTIFY value to an event filedescriptor. The eventfd will + * become readable when the Guest does an LHCALL_NOTIFY with that value. + * + * This is really convenient for processing each virtqueue in a separate + * thread. + */ static int attach_eventfd(struct lguest *lg, const unsigned long __user *input) { unsigned long addr, fd; @@ -86,6 +157,11 @@ static int attach_eventfd(struct lguest *lg, const unsigned long __user *input) if (get_user(fd, input) != 0) return -EFAULT; + /* + * Just make sure two callers don't add eventfds at once. We really + * only need to lock against callers adding to the same Guest, so using + * the Big Lguest Lock is overkill. But this is setup, not a fast path. + */ mutex_lock(&lguest_lock); err = add_eventfd(lg, addr, fd); mutex_unlock(&lguest_lock); @@ -106,6 +182,10 @@ static int user_send_irq(struct lg_cpu *cpu, const unsigned long __user *input) if (irq >= LGUEST_IRQS) return -EINVAL; + /* + * Next time the Guest runs, the core code will see if it can deliver + * this interrupt. + */ set_interrupt(cpu, irq); return 0; } @@ -307,10 +387,10 @@ unlock: * The first operation the Launcher does must be a write. All writes * start with an unsigned long number: for the first write this must be * LHREQ_INITIALIZE to set up the Guest. After that the Launcher can use - * writes of other values to send interrupts. + * writes of other values to send interrupts or set up receipt of notifications. * * Note that we overload the "offset" in the /dev/lguest file to indicate what - * CPU number we're dealing with. Currently this is always 0, since we only + * CPU number we're dealing with. Currently this is always 0 since we only * support uniprocessor Guests, but you can see the beginnings of SMP support * here. */ diff --git a/drivers/lguest/page_tables.c b/drivers/lguest/page_tables.c index 3da902e4b4c..a8d0aee3bc0 100644 --- a/drivers/lguest/page_tables.c +++ b/drivers/lguest/page_tables.c @@ -29,10 +29,10 @@ /*H:300 * The Page Table Code * - * We use two-level page tables for the Guest. If you're not entirely - * comfortable with virtual addresses, physical addresses and page tables then - * I recommend you review arch/x86/lguest/boot.c's "Page Table Handling" (with - * diagrams!). + * We use two-level page tables for the Guest, or three-level with PAE. If + * you're not entirely comfortable with virtual addresses, physical addresses + * and page tables then I recommend you review arch/x86/lguest/boot.c's "Page + * Table Handling" (with diagrams!). * * The Guest keeps page tables, but we maintain the actual ones here: these are * called "shadow" page tables. Which is a very Guest-centric name: these are @@ -52,9 +52,8 @@ :*/ /* - * 1024 entries in a page table page maps 1024 pages: 4MB. The Switcher is - * conveniently placed at the top 4MB, so it uses a separate, complete PTE - * page. + * The Switcher uses the complete top PTE page. That's 1024 PTE entries (4MB) + * or 512 PTE entries with PAE (2MB). */ #define SWITCHER_PGD_INDEX (PTRS_PER_PGD - 1) @@ -81,7 +80,8 @@ static DEFINE_PER_CPU(pte_t *, switcher_pte_pages); /*H:320 * The page table code is curly enough to need helper functions to keep it - * clear and clean. + * clear and clean. The kernel itself provides many of them; one advantage + * of insisting that the Guest and Host use the same CONFIG_PAE setting. * * There are two functions which return pointers to the shadow (aka "real") * page tables. @@ -155,7 +155,7 @@ static pte_t *spte_addr(struct lg_cpu *cpu, pgd_t spgd, unsigned long vaddr) } /* - * These two functions just like the above two, except they access the Guest + * These functions are just like the above two, except they access the Guest * page tables. Hence they return a Guest address. */ static unsigned long gpgd_addr(struct lg_cpu *cpu, unsigned long vaddr) @@ -165,6 +165,7 @@ static unsigned long gpgd_addr(struct lg_cpu *cpu, unsigned long vaddr) } #ifdef CONFIG_X86_PAE +/* Follow the PGD to the PMD. */ static unsigned long gpmd_addr(pgd_t gpgd, unsigned long vaddr) { unsigned long gpage = pgd_pfn(gpgd) << PAGE_SHIFT; @@ -172,6 +173,7 @@ static unsigned long gpmd_addr(pgd_t gpgd, unsigned long vaddr) return gpage + pmd_index(vaddr) * sizeof(pmd_t); } +/* Follow the PMD to the PTE. */ static unsigned long gpte_addr(struct lg_cpu *cpu, pmd_t gpmd, unsigned long vaddr) { @@ -181,6 +183,7 @@ static unsigned long gpte_addr(struct lg_cpu *cpu, return gpage + pte_index(vaddr) * sizeof(pte_t); } #else +/* Follow the PGD to the PTE (no mid-level for !PAE). */ static unsigned long gpte_addr(struct lg_cpu *cpu, pgd_t gpgd, unsigned long vaddr) { @@ -314,6 +317,7 @@ bool demand_page(struct lg_cpu *cpu, unsigned long vaddr, int errcode) pte_t gpte; pte_t *spte; + /* Mid level for PAE. */ #ifdef CONFIG_X86_PAE pmd_t *spmd; pmd_t gpmd; @@ -391,6 +395,8 @@ bool demand_page(struct lg_cpu *cpu, unsigned long vaddr, int errcode) */ gpte_ptr = gpte_addr(cpu, gpgd, vaddr); #endif + + /* Read the actual PTE value. */ gpte = lgread(cpu, gpte_ptr, pte_t); /* If this page isn't in the Guest page tables, we can't page it in. */ @@ -507,6 +513,7 @@ void pin_page(struct lg_cpu *cpu, unsigned long vaddr) if (!page_writable(cpu, vaddr) && !demand_page(cpu, vaddr, 2)) kill_guest(cpu, "bad stack page %#lx", vaddr); } +/*:*/ #ifdef CONFIG_X86_PAE static void release_pmd(pmd_t *spmd) @@ -543,7 +550,11 @@ static void release_pgd(pgd_t *spgd) } #else /* !CONFIG_X86_PAE */ -/*H:450 If we chase down the release_pgd() code, it looks like this: */ +/*H:450 + * If we chase down the release_pgd() code, the non-PAE version looks like + * this. The PAE version is almost identical, but instead of calling + * release_pte it calls release_pmd(), which looks much like this. + */ static void release_pgd(pgd_t *spgd) { /* If the entry's not present, there's nothing to release. */ @@ -898,17 +909,21 @@ void guest_set_pgd(struct lguest *lg, unsigned long gpgdir, u32 idx) /* ... throw it away. */ release_pgd(lg->pgdirs[pgdir].pgdir + idx); } + #ifdef CONFIG_X86_PAE +/* For setting a mid-level, we just throw everything away. It's easy. */ void guest_set_pmd(struct lguest *lg, unsigned long pmdp, u32 idx) { guest_pagetable_clear_all(&lg->cpus[0]); } #endif -/* - * Once we know how much memory we have we can construct simple identity (which +/*H:505 + * To get through boot, we construct simple identity page mappings (which * set virtual == physical) and linear mappings which will get the Guest far - * enough into the boot to create its own. + * enough into the boot to create its own. The linear mapping means we + * simplify the Guest boot, but it makes assumptions about their PAGE_OFFSET, + * as you'll see. * * We lay them out of the way, just below the initrd (which is why we need to * know its size here). @@ -944,6 +959,10 @@ static unsigned long setup_pagetables(struct lguest *lg, linear = (void *)pgdir - linear_pages * PAGE_SIZE; #ifdef CONFIG_X86_PAE + /* + * And the single mid page goes below that. We only use one, but + * that's enough to map 1G, which definitely gets us through boot. + */ pmds = (void *)linear - PAGE_SIZE; #endif /* @@ -957,13 +976,14 @@ static unsigned long setup_pagetables(struct lguest *lg, return -EFAULT; } +#ifdef CONFIG_X86_PAE /* - * The top level points to the linear page table pages above. - * We setup the identity and linear mappings here. + * Make the Guest PMD entries point to the corresponding place in the + * linear mapping (up to one page worth of PMD). */ -#ifdef CONFIG_X86_PAE for (i = j = 0; i < mapped_pages && j < PTRS_PER_PMD; i += PTRS_PER_PTE, j++) { + /* FIXME: native_set_pmd is overkill here. */ native_set_pmd(&pmd, __pmd(((unsigned long)(linear + i) - mem_base) | _PAGE_PRESENT | _PAGE_RW | _PAGE_USER)); @@ -971,18 +991,36 @@ static unsigned long setup_pagetables(struct lguest *lg, return -EFAULT; } + /* One PGD entry, pointing to that PMD page. */ set_pgd(&pgd, __pgd(((u32)pmds - mem_base) | _PAGE_PRESENT)); + /* Copy it in as the first PGD entry (ie. addresses 0-1G). */ if (copy_to_user(&pgdir[0], &pgd, sizeof(pgd)) != 0) return -EFAULT; + /* + * And the third PGD entry (ie. addresses 3G-4G). + * + * FIXME: This assumes that PAGE_OFFSET for the Guest is 0xC0000000. + */ if (copy_to_user(&pgdir[3], &pgd, sizeof(pgd)) != 0) return -EFAULT; #else + /* + * The top level points to the linear page table pages above. + * We setup the identity and linear mappings here. + */ phys_linear = (unsigned long)linear - mem_base; for (i = 0; i < mapped_pages; i += PTRS_PER_PTE) { pgd_t pgd; + /* + * Create a PGD entry which points to the right part of the + * linear PTE pages. + */ pgd = __pgd((phys_linear + i * sizeof(pte_t)) | (_PAGE_PRESENT | _PAGE_RW | _PAGE_USER)); + /* + * Copy it into the PGD page at 0 and PAGE_OFFSET. + */ if (copy_to_user(&pgdir[i / PTRS_PER_PTE], &pgd, sizeof(pgd)) || copy_to_user(&pgdir[pgd_index(PAGE_OFFSET) + i / PTRS_PER_PTE], @@ -992,8 +1030,8 @@ static unsigned long setup_pagetables(struct lguest *lg, #endif /* - * We return the top level (guest-physical) address: remember where - * this is. + * We return the top level (guest-physical) address: we remember where + * this is to write it into lguest_data when the Guest initializes. */ return (unsigned long)pgdir - mem_base; } @@ -1031,7 +1069,9 @@ int init_guest_pagetable(struct lguest *lg) lg->pgdirs[0].pgdir = (pgd_t *)get_zeroed_page(GFP_KERNEL); if (!lg->pgdirs[0].pgdir) return -ENOMEM; + #ifdef CONFIG_X86_PAE + /* For PAE, we also create the initial mid-level. */ pgd = lg->pgdirs[0].pgdir; pmd_table = (pmd_t *) get_zeroed_page(GFP_KERNEL); if (!pmd_table) @@ -1040,11 +1080,13 @@ int init_guest_pagetable(struct lguest *lg) set_pgd(pgd + SWITCHER_PGD_INDEX, __pgd(__pa(pmd_table) | _PAGE_PRESENT)); #endif + + /* This is the current page table. */ lg->cpus[0].cpu_pgd = 0; return 0; } -/* When the Guest calls LHCALL_LGUEST_INIT we do more setup. */ +/*H:508 When the Guest calls LHCALL_LGUEST_INIT we do more setup. */ void page_table_guest_data_init(struct lg_cpu *cpu) { /* We get the kernel address: above this is all kernel memory. */ @@ -1105,12 +1147,16 @@ void map_switcher_in_guest(struct lg_cpu *cpu, struct lguest_pages *pages) pmd_t switcher_pmd; pmd_t *pmd_table; + /* FIXME: native_set_pmd is overkill here. */ native_set_pmd(&switcher_pmd, pfn_pmd(__pa(switcher_pte_page) >> PAGE_SHIFT, PAGE_KERNEL_EXEC)); + /* Figure out where the pmd page is, by reading the PGD, and converting + * it to a virtual address. */ pmd_table = __va(pgd_pfn(cpu->lg-> pgdirs[cpu->cpu_pgd].pgdir[SWITCHER_PGD_INDEX]) << PAGE_SHIFT); + /* Now write it into the shadow page table. */ native_set_pmd(&pmd_table[SWITCHER_PMD_INDEX], switcher_pmd); #else pgd_t switcher_pgd; diff --git a/drivers/lguest/x86/core.c b/drivers/lguest/x86/core.c index 96f7d88ec7f..6ae388849a3 100644 --- a/drivers/lguest/x86/core.c +++ b/drivers/lguest/x86/core.c @@ -187,7 +187,7 @@ static void run_guest_once(struct lg_cpu *cpu, struct lguest_pages *pages) * also simplify copy_in_guest_info(). Note that we'd still need to restore * things when we exit to Launcher userspace, but that's fairly easy. * - * We could also try using this hooks for PGE, but that might be too expensive. + * We could also try using these hooks for PGE, but that might be too expensive. * * The hooks were designed for KVM, but we can also put them to good use. :*/ diff --git a/drivers/lguest/x86/switcher_32.S b/drivers/lguest/x86/switcher_32.S index 6dec0979383..40634b0db9f 100644 --- a/drivers/lguest/x86/switcher_32.S +++ b/drivers/lguest/x86/switcher_32.S @@ -1,7 +1,7 @@ /*P:900 - * This is the Switcher: code which sits at 0xFFC00000 astride both the - * Host and Guest to do the low-level Guest<->Host switch. It is as simple as - * it can be made, but it's naturally very specific to x86. + * This is the Switcher: code which sits at 0xFFC00000 (or 0xFFE00000) astride + * both the Host and Guest to do the low-level Guest<->Host switch. It is as + * simple as it can be made, but it's naturally very specific to x86. * * You have now completed Preparation. If this has whet your appetite; if you * are feeling invigorated and refreshed then the next, more challenging stage -- cgit v1.2.3 From 1842f23c05b6a866be831aa60bc8a8731c58ddd0 Mon Sep 17 00:00:00 2001 From: Rusty Russell Date: Thu, 30 Jul 2009 16:03:46 -0600 Subject: lguest and virtio: cleanup struct definitions to Linux style. I've been doing this for years, and akpm picked me up on it about 12 months ago. lguest partly serves as example code, so let's do it Right. Also, remove two unused fields in struct vblk_info in the example launcher. Signed-off-by: Rusty Russell Cc: Ingo Molnar --- Documentation/lguest/lguest.c | 21 +++++---------------- drivers/lguest/lg.h | 9 +++------ drivers/lguest/lguest_device.c | 3 +-- include/linux/lguest.h | 3 +-- include/linux/virtio_blk.h | 6 ++---- include/linux/virtio_config.h | 3 +-- include/linux/virtio_net.h | 6 ++---- include/linux/virtio_ring.h | 12 ++++-------- 8 files changed, 19 insertions(+), 44 deletions(-) diff --git a/Documentation/lguest/lguest.c b/Documentation/lguest/lguest.c index 45163651b51..950cde6d6e5 100644 --- a/Documentation/lguest/lguest.c +++ b/Documentation/lguest/lguest.c @@ -93,8 +93,7 @@ static int lguest_fd; static unsigned int __thread cpu_id; /* This is our list of devices. */ -struct device_list -{ +struct device_list { /* Counter to assign interrupt numbers. */ unsigned int next_irq; @@ -114,8 +113,7 @@ struct device_list static struct device_list devices; /* The device structure describes a single device. */ -struct device -{ +struct device { /* The linked-list pointer. */ struct device *next; @@ -140,8 +138,7 @@ struct device }; /* The virtqueue structure describes a queue attached to a device. */ -struct virtqueue -{ +struct virtqueue { struct virtqueue *next; /* Which device owns me. */ @@ -779,8 +776,7 @@ static void add_used_and_trigger(struct virtqueue *vq, unsigned head, int len) * * We associate some data with the console for our exit hack. */ -struct console_abort -{ +struct console_abort { /* How many times have they hit ^C? */ int count; /* When did they start? */ @@ -1570,20 +1566,13 @@ static void setup_tun_net(char *arg) /*:*/ /* This hangs off device->priv. */ -struct vblk_info -{ +struct vblk_info { /* The size of the file. */ off64_t len; /* The file descriptor for the file. */ int fd; - /* IO thread listens on this file descriptor [0]. */ - int workpipe[2]; - - /* IO thread writes to this file descriptor to mark it done, then - * Launcher triggers interrupt to Guest. */ - int done_fd; }; /*L:210 diff --git a/drivers/lguest/lg.h b/drivers/lguest/lg.h index 74c0db691b5..bc28745d05a 100644 --- a/drivers/lguest/lg.h +++ b/drivers/lguest/lg.h @@ -16,15 +16,13 @@ void free_pagetables(void); int init_pagetables(struct page **switcher_page, unsigned int pages); -struct pgdir -{ +struct pgdir { unsigned long gpgdir; pgd_t *pgdir; }; /* We have two pages shared with guests, per cpu. */ -struct lguest_pages -{ +struct lguest_pages { /* This is the stack page mapped rw in guest */ char spare[PAGE_SIZE - sizeof(struct lguest_regs)]; struct lguest_regs regs; @@ -89,8 +87,7 @@ struct lg_eventfd_map { }; /* The private info the thread maintains about the guest. */ -struct lguest -{ +struct lguest { struct lguest_data __user *lguest_data; struct lg_cpu cpus[NR_CPUS]; unsigned int nr_cpus; diff --git a/drivers/lguest/lguest_device.c b/drivers/lguest/lguest_device.c index 1401c1ace1e..b6200bc39b5 100644 --- a/drivers/lguest/lguest_device.c +++ b/drivers/lguest/lguest_device.c @@ -207,8 +207,7 @@ static void lg_reset(struct virtio_device *vdev) */ /*D:140 This is the information we remember about each virtqueue. */ -struct lguest_vq_info -{ +struct lguest_vq_info { /* A copy of the information contained in the device config. */ struct lguest_vqconfig config; diff --git a/include/linux/lguest.h b/include/linux/lguest.h index 0a3a11afd64..2fb1dcbcb5a 100644 --- a/include/linux/lguest.h +++ b/include/linux/lguest.h @@ -18,8 +18,7 @@ * lguest_data". Once the Guest's initialization hypercall tells the Host where * this is, the Guest and Host both publish information in it. :*/ -struct lguest_data -{ +struct lguest_data { /* * 512 == enabled (same as eflags in normal hardware). The Guest * changes interrupts so often that a hypercall is too slow. diff --git a/include/linux/virtio_blk.h b/include/linux/virtio_blk.h index be7d255fc7c..8dab9f2b883 100644 --- a/include/linux/virtio_blk.h +++ b/include/linux/virtio_blk.h @@ -20,8 +20,7 @@ #define VIRTIO_BLK_ID_BYTES (sizeof(__u16[256])) /* IDENTIFY DATA */ -struct virtio_blk_config -{ +struct virtio_blk_config { /* The capacity (in 512-byte sectors). */ __u64 capacity; /* The maximum segment size (if VIRTIO_BLK_F_SIZE_MAX) */ @@ -50,8 +49,7 @@ struct virtio_blk_config #define VIRTIO_BLK_T_BARRIER 0x80000000 /* This is the first element of the read scatter-gather list. */ -struct virtio_blk_outhdr -{ +struct virtio_blk_outhdr { /* VIRTIO_BLK_T* */ __u32 type; /* io priority. */ diff --git a/include/linux/virtio_config.h b/include/linux/virtio_config.h index 99f514575f6..e547e3c8ee9 100644 --- a/include/linux/virtio_config.h +++ b/include/linux/virtio_config.h @@ -79,8 +79,7 @@ * the dev->feature bits if it wants. */ typedef void vq_callback_t(struct virtqueue *); -struct virtio_config_ops -{ +struct virtio_config_ops { void (*get)(struct virtio_device *vdev, unsigned offset, void *buf, unsigned len); void (*set)(struct virtio_device *vdev, unsigned offset, diff --git a/include/linux/virtio_net.h b/include/linux/virtio_net.h index 9c543d6ac53..d8dd539c9f4 100644 --- a/include/linux/virtio_net.h +++ b/include/linux/virtio_net.h @@ -31,8 +31,7 @@ #define VIRTIO_NET_S_LINK_UP 1 /* Link is up */ -struct virtio_net_config -{ +struct virtio_net_config { /* The config defining mac address (if VIRTIO_NET_F_MAC) */ __u8 mac[6]; /* See VIRTIO_NET_F_STATUS and VIRTIO_NET_S_* above */ @@ -41,8 +40,7 @@ struct virtio_net_config /* This is the first element of the scatter-gather list. If you don't * specify GSO or CSUM features, you can simply ignore the header. */ -struct virtio_net_hdr -{ +struct virtio_net_hdr { #define VIRTIO_NET_HDR_F_NEEDS_CSUM 1 // Use csum_start, csum_offset __u8 flags; #define VIRTIO_NET_HDR_GSO_NONE 0 // Not a GSO frame diff --git a/include/linux/virtio_ring.h b/include/linux/virtio_ring.h index 693e0ec5afa..e4d144b132b 100644 --- a/include/linux/virtio_ring.h +++ b/include/linux/virtio_ring.h @@ -30,8 +30,7 @@ #define VIRTIO_RING_F_INDIRECT_DESC 28 /* Virtio ring descriptors: 16 bytes. These can chain together via "next". */ -struct vring_desc -{ +struct vring_desc { /* Address (guest-physical). */ __u64 addr; /* Length. */ @@ -42,24 +41,21 @@ struct vring_desc __u16 next; }; -struct vring_avail -{ +struct vring_avail { __u16 flags; __u16 idx; __u16 ring[]; }; /* u32 is used here for ids for padding reasons. */ -struct vring_used_elem -{ +struct vring_used_elem { /* Index of start of used descriptor chain. */ __u32 id; /* Total length of the descriptor chain which was used (written to) */ __u32 len; }; -struct vring_used -{ +struct vring_used { __u16 flags; __u16 idx; struct vring_used_elem ring[]; -- cgit v1.2.3 From 2163b1e616c41c286f5ab79912671cd4bf52057c Mon Sep 17 00:00:00 2001 From: Steven Whitehouse Date: Thu, 25 Jun 2009 16:30:26 +0100 Subject: GFS2: Shrink the shrinker This patch removes some of the special cases that the shrinker was trying to deal with. As a result we leave fewer items on the list and none at all which cannot be demoted. This makes the list scanning more efficient and solves some issues seen with large numbers of inodes. Signed-off-by: Steven Whitehouse --- fs/gfs2/glock.c | 23 +++++------------------ 1 file changed, 5 insertions(+), 18 deletions(-) diff --git a/fs/gfs2/glock.c b/fs/gfs2/glock.c index 297421c0427..fdb796c4f94 100644 --- a/fs/gfs2/glock.c +++ b/fs/gfs2/glock.c @@ -1300,7 +1300,6 @@ static int gfs2_shrink_glock_memory(int nr, gfp_t gfp_mask) struct gfs2_glock *gl; int may_demote; int nr_skipped = 0; - int got_ref = 0; LIST_HEAD(skipped); if (nr == 0) @@ -1318,7 +1317,6 @@ static int gfs2_shrink_glock_memory(int nr, gfp_t gfp_mask) /* Test for being demotable */ if (!test_and_set_bit(GLF_LOCK, &gl->gl_flags)) { gfs2_glock_hold(gl); - got_ref = 1; spin_unlock(&lru_lock); spin_lock(&gl->gl_spin); may_demote = demote_ok(gl); @@ -1327,25 +1325,14 @@ static int gfs2_shrink_glock_memory(int nr, gfp_t gfp_mask) if (may_demote) { handle_callback(gl, LM_ST_UNLOCKED, 0); nr--; - if (queue_delayed_work(glock_workqueue, &gl->gl_work, 0) == 0) - gfs2_glock_put(gl); - got_ref = 0; } + if (queue_delayed_work(glock_workqueue, &gl->gl_work, 0) == 0) + gfs2_glock_put(gl); spin_lock(&lru_lock); - if (may_demote) - continue; - } - if (list_empty(&gl->gl_lru) && - (atomic_read(&gl->gl_ref) <= (2 + got_ref))) { - nr_skipped++; - list_add(&gl->gl_lru, &skipped); - } - if (got_ref) { - spin_unlock(&lru_lock); - gfs2_glock_put(gl); - spin_lock(&lru_lock); - got_ref = 0; + continue; } + nr_skipped++; + list_add(&gl->gl_lru, &skipped); } list_splice(&skipped, &lru_list); atomic_add(nr_skipped, &lru_count); -- cgit v1.2.3 From 1946f70ab5e4eb8b54a8eaaedba2293a3750ab7e Mon Sep 17 00:00:00 2001 From: Benjamin Marzinski Date: Thu, 25 Jun 2009 15:09:51 -0500 Subject: GFS2: keep statfs info in sync on grows GFS2 wasn't syncing its statfs info on grows. This causes a problem when you grow the filesystem on multiple nodes. GFS2 would calculate the new space based on the resource groups (which are always current), and then assume that the filesystem had grown the from the existing statfs size. If you grew the filesystem on two different nodes in a short time, the second node wouldn't see the statfs size change from the first node, and would assume that it was grown by a larger amount than it was. When all these changes were synced out, the total fileystem size would be incorrect (the first grow would be counted twice). This patch syncs makes GFS2 read in the statfs changes from disk before a grow, and write them out after the grow, while the master statfs inode is locked. Signed-off-by: Benjamin Marzinski Signed-off-by: Steven Whitehouse --- fs/gfs2/aops.c | 39 +++++++++++++++++++++++++++++++++++++++ fs/gfs2/super.c | 39 +++++++++++++++++++++++++-------------- fs/gfs2/super.h | 4 ++++ 3 files changed, 68 insertions(+), 14 deletions(-) diff --git a/fs/gfs2/aops.c b/fs/gfs2/aops.c index 03ebb439ace..7ebae9a4ecc 100644 --- a/fs/gfs2/aops.c +++ b/fs/gfs2/aops.c @@ -624,6 +624,7 @@ static int gfs2_write_begin(struct file *file, struct address_space *mapping, { struct gfs2_inode *ip = GFS2_I(mapping->host); struct gfs2_sbd *sdp = GFS2_SB(mapping->host); + struct gfs2_inode *m_ip = GFS2_I(sdp->sd_statfs_inode); unsigned int data_blocks = 0, ind_blocks = 0, rblocks; int alloc_required; int error = 0; @@ -637,6 +638,14 @@ static int gfs2_write_begin(struct file *file, struct address_space *mapping, error = gfs2_glock_nq(&ip->i_gh); if (unlikely(error)) goto out_uninit; + if (&ip->i_inode == sdp->sd_rindex) { + error = gfs2_glock_nq_init(m_ip->i_gl, LM_ST_EXCLUSIVE, + GL_NOCACHE, &m_ip->i_gh); + if (unlikely(error)) { + gfs2_glock_dq(&ip->i_gh); + goto out_uninit; + } + } error = gfs2_write_alloc_required(ip, pos, len, &alloc_required); if (error) @@ -667,6 +676,8 @@ static int gfs2_write_begin(struct file *file, struct address_space *mapping, rblocks += data_blocks ? data_blocks : 1; if (ind_blocks || data_blocks) rblocks += RES_STATFS + RES_QUOTA; + if (&ip->i_inode == sdp->sd_rindex) + rblocks += 2 * RES_STATFS; error = gfs2_trans_begin(sdp, rblocks, PAGE_CACHE_SIZE/sdp->sd_sb.sb_bsize); @@ -712,6 +723,10 @@ out_alloc_put: gfs2_alloc_put(ip); } out_unlock: + if (&ip->i_inode == sdp->sd_rindex) { + gfs2_glock_dq(&m_ip->i_gh); + gfs2_holder_uninit(&m_ip->i_gh); + } gfs2_glock_dq(&ip->i_gh); out_uninit: gfs2_holder_uninit(&ip->i_gh); @@ -725,14 +740,21 @@ out_uninit: static void adjust_fs_space(struct inode *inode) { struct gfs2_sbd *sdp = inode->i_sb->s_fs_info; + struct gfs2_inode *m_ip = GFS2_I(sdp->sd_statfs_inode); + struct gfs2_inode *l_ip = GFS2_I(sdp->sd_sc_inode); struct gfs2_statfs_change_host *m_sc = &sdp->sd_statfs_master; struct gfs2_statfs_change_host *l_sc = &sdp->sd_statfs_local; + struct buffer_head *m_bh, *l_bh; u64 fs_total, new_free; /* Total up the file system space, according to the latest rindex. */ fs_total = gfs2_ri_total(sdp); + if (gfs2_meta_inode_buffer(m_ip, &m_bh) != 0) + return; spin_lock(&sdp->sd_statfs_spin); + gfs2_statfs_change_in(m_sc, m_bh->b_data + + sizeof(struct gfs2_dinode)); if (fs_total > (m_sc->sc_total + l_sc->sc_total)) new_free = fs_total - (m_sc->sc_total + l_sc->sc_total); else @@ -741,6 +763,13 @@ static void adjust_fs_space(struct inode *inode) fs_warn(sdp, "File system extended by %llu blocks.\n", (unsigned long long)new_free); gfs2_statfs_change(sdp, new_free, new_free, 0); + + if (gfs2_meta_inode_buffer(l_ip, &l_bh) != 0) + goto out; + update_statfs(sdp, m_bh, l_bh); + brelse(l_bh); +out: + brelse(m_bh); } /** @@ -763,6 +792,7 @@ static int gfs2_stuffed_write_end(struct inode *inode, struct buffer_head *dibh, { struct gfs2_inode *ip = GFS2_I(inode); struct gfs2_sbd *sdp = GFS2_SB(inode); + struct gfs2_inode *m_ip = GFS2_I(sdp->sd_statfs_inode); u64 to = pos + copied; void *kaddr; unsigned char *buf = dibh->b_data + sizeof(struct gfs2_dinode); @@ -794,6 +824,10 @@ static int gfs2_stuffed_write_end(struct inode *inode, struct buffer_head *dibh, brelse(dibh); gfs2_trans_end(sdp); + if (inode == sdp->sd_rindex) { + gfs2_glock_dq(&m_ip->i_gh); + gfs2_holder_uninit(&m_ip->i_gh); + } gfs2_glock_dq(&ip->i_gh); gfs2_holder_uninit(&ip->i_gh); return copied; @@ -823,6 +857,7 @@ static int gfs2_write_end(struct file *file, struct address_space *mapping, struct inode *inode = page->mapping->host; struct gfs2_inode *ip = GFS2_I(inode); struct gfs2_sbd *sdp = GFS2_SB(inode); + struct gfs2_inode *m_ip = GFS2_I(sdp->sd_statfs_inode); struct buffer_head *dibh; struct gfs2_alloc *al = ip->i_alloc; unsigned int from = pos & (PAGE_CACHE_SIZE - 1); @@ -865,6 +900,10 @@ failed: gfs2_quota_unlock(ip); gfs2_alloc_put(ip); } + if (inode == sdp->sd_rindex) { + gfs2_glock_dq(&m_ip->i_gh); + gfs2_holder_uninit(&m_ip->i_gh); + } gfs2_glock_dq(&ip->i_gh); gfs2_holder_uninit(&ip->i_gh); return ret; diff --git a/fs/gfs2/super.c b/fs/gfs2/super.c index 0a680133647..552e321cee5 100644 --- a/fs/gfs2/super.c +++ b/fs/gfs2/super.c @@ -353,7 +353,7 @@ fail: return error; } -static void gfs2_statfs_change_in(struct gfs2_statfs_change_host *sc, const void *buf) +void gfs2_statfs_change_in(struct gfs2_statfs_change_host *sc, const void *buf) { const struct gfs2_statfs_change *str = buf; @@ -441,6 +441,29 @@ void gfs2_statfs_change(struct gfs2_sbd *sdp, s64 total, s64 free, brelse(l_bh); } +void update_statfs(struct gfs2_sbd *sdp, struct buffer_head *m_bh, + struct buffer_head *l_bh) +{ + struct gfs2_inode *m_ip = GFS2_I(sdp->sd_statfs_inode); + struct gfs2_inode *l_ip = GFS2_I(sdp->sd_sc_inode); + struct gfs2_statfs_change_host *m_sc = &sdp->sd_statfs_master; + struct gfs2_statfs_change_host *l_sc = &sdp->sd_statfs_local; + + gfs2_trans_add_bh(l_ip->i_gl, l_bh, 1); + + spin_lock(&sdp->sd_statfs_spin); + m_sc->sc_total += l_sc->sc_total; + m_sc->sc_free += l_sc->sc_free; + m_sc->sc_dinodes += l_sc->sc_dinodes; + memset(l_sc, 0, sizeof(struct gfs2_statfs_change)); + memset(l_bh->b_data + sizeof(struct gfs2_dinode), + 0, sizeof(struct gfs2_statfs_change)); + spin_unlock(&sdp->sd_statfs_spin); + + gfs2_trans_add_bh(m_ip->i_gl, m_bh, 1); + gfs2_statfs_change_out(m_sc, m_bh->b_data + sizeof(struct gfs2_dinode)); +} + int gfs2_statfs_sync(struct gfs2_sbd *sdp) { struct gfs2_inode *m_ip = GFS2_I(sdp->sd_statfs_inode); @@ -477,19 +500,7 @@ int gfs2_statfs_sync(struct gfs2_sbd *sdp) if (error) goto out_bh2; - gfs2_trans_add_bh(l_ip->i_gl, l_bh, 1); - - spin_lock(&sdp->sd_statfs_spin); - m_sc->sc_total += l_sc->sc_total; - m_sc->sc_free += l_sc->sc_free; - m_sc->sc_dinodes += l_sc->sc_dinodes; - memset(l_sc, 0, sizeof(struct gfs2_statfs_change)); - memset(l_bh->b_data + sizeof(struct gfs2_dinode), - 0, sizeof(struct gfs2_statfs_change)); - spin_unlock(&sdp->sd_statfs_spin); - - gfs2_trans_add_bh(m_ip->i_gl, m_bh, 1); - gfs2_statfs_change_out(m_sc, m_bh->b_data + sizeof(struct gfs2_dinode)); + update_statfs(sdp, m_bh, l_bh); gfs2_trans_end(sdp); diff --git a/fs/gfs2/super.h b/fs/gfs2/super.h index b56413e3e40..22e0417ed99 100644 --- a/fs/gfs2/super.h +++ b/fs/gfs2/super.h @@ -40,6 +40,10 @@ extern int gfs2_make_fs_rw(struct gfs2_sbd *sdp); extern int gfs2_statfs_init(struct gfs2_sbd *sdp); extern void gfs2_statfs_change(struct gfs2_sbd *sdp, s64 total, s64 free, s64 dinodes); +extern void gfs2_statfs_change_in(struct gfs2_statfs_change_host *sc, + const void *buf); +extern void update_statfs(struct gfs2_sbd *sdp, struct buffer_head *m_bh, + struct buffer_head *l_bh); extern int gfs2_statfs_sync(struct gfs2_sbd *sdp); extern int gfs2_freeze_fs(struct gfs2_sbd *sdp); -- cgit v1.2.3 From a51b56fff3f04fc5aa66b21a2a6d693ee9862d66 Mon Sep 17 00:00:00 2001 From: Benjamin Marzinski Date: Tue, 30 Jun 2009 13:51:11 -0500 Subject: GFS2: Fix panic in glock memory shrinker It is possible for gfs2_shrink_glock_memory() to check a glock for demotion that's in the process of being freed by gfs2_glock_put(). In this case, gfs2_shrink_glock_memory() will acquire a new reference to this glock, and then try to free the glock itself when it drops the refernce. To solve this, gfs2_shrink_glock_memory() just needs to check if the glock is in the process of being freed, and if so skip it without ever unlocking the lru_lock. Signed-off-by: Benjamin Marzinski Acked-by: Bob Peterson Signed-off-by: Steven Whitehouse --- fs/gfs2/glock.c | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/fs/gfs2/glock.c b/fs/gfs2/glock.c index fdb796c4f94..827136ee794 100644 --- a/fs/gfs2/glock.c +++ b/fs/gfs2/glock.c @@ -1314,6 +1314,10 @@ static int gfs2_shrink_glock_memory(int nr, gfp_t gfp_mask) list_del_init(&gl->gl_lru); atomic_dec(&lru_count); + /* Check if glock is about to be freed */ + if (atomic_read(&gl->gl_ref) == 0) + continue; + /* Test for being demotable */ if (!test_and_set_bit(GLF_LOCK, &gl->gl_flags)) { gfs2_glock_hold(gl); -- cgit v1.2.3 From 1e19a19584b332eb92a573b66b7342fb97e67507 Mon Sep 17 00:00:00 2001 From: Steven Whitehouse Date: Fri, 10 Jul 2009 21:13:38 +0100 Subject: GFS2: Don't try and dealloc own inode When searching for unlinked, but still allocated inodes during block allocation, avoid the block relating to the inode that is doing the allocation. This fixes a hang caused when an unlinked, but still open, inode tries to allocate some more blocks and lands up finding itself during the search for deallocatable inodes. Signed-off-by: Steven Whitehouse --- fs/gfs2/rgrp.c | 9 ++++++--- 1 file changed, 6 insertions(+), 3 deletions(-) diff --git a/fs/gfs2/rgrp.c b/fs/gfs2/rgrp.c index daa4ae341a2..5e5074176da 100644 --- a/fs/gfs2/rgrp.c +++ b/fs/gfs2/rgrp.c @@ -961,7 +961,8 @@ static int try_rgrp_fit(struct gfs2_rgrpd *rgd, struct gfs2_alloc *al) * Returns: The inode, if one has been found */ -static struct inode *try_rgrp_unlink(struct gfs2_rgrpd *rgd, u64 *last_unlinked) +static struct inode *try_rgrp_unlink(struct gfs2_rgrpd *rgd, u64 *last_unlinked, + u64 skip) { struct inode *inode; u32 goal = 0, block; @@ -985,6 +986,8 @@ static struct inode *try_rgrp_unlink(struct gfs2_rgrpd *rgd, u64 *last_unlinked) goal++; if (*last_unlinked != NO_BLOCK && no_addr <= *last_unlinked) continue; + if (no_addr == skip) + continue; *last_unlinked = no_addr; inode = gfs2_inode_lookup(rgd->rd_sbd->sd_vfs, DT_UNKNOWN, no_addr, -1, 1); @@ -1104,7 +1107,7 @@ static struct inode *get_local_rgrp(struct gfs2_inode *ip, u64 *last_unlinked) if (try_rgrp_fit(rgd, al)) goto out; if (rgd->rd_flags & GFS2_RDF_CHECK) - inode = try_rgrp_unlink(rgd, last_unlinked); + inode = try_rgrp_unlink(rgd, last_unlinked, ip->i_no_addr); if (!rg_locked) gfs2_glock_dq_uninit(&al->al_rgd_gh); if (inode) @@ -1138,7 +1141,7 @@ static struct inode *get_local_rgrp(struct gfs2_inode *ip, u64 *last_unlinked) if (try_rgrp_fit(rgd, al)) goto out; if (rgd->rd_flags & GFS2_RDF_CHECK) - inode = try_rgrp_unlink(rgd, last_unlinked); + inode = try_rgrp_unlink(rgd, last_unlinked, ip->i_no_addr); if (!rg_locked) gfs2_glock_dq_uninit(&al->al_rgd_gh); if (inode) -- cgit v1.2.3 From 8ff22a6f9bdaac87c0eeb1d56c736181f11b4221 Mon Sep 17 00:00:00 2001 From: Benjamin Marzinski Date: Fri, 10 Jul 2009 18:04:24 -0500 Subject: GFS2: Don't put unlikely reclaim candidates on the reclaim list. GFS2 was placing far too many glocks on the reclaim list that were not good candidates for freeing up from cache. These locks would sit there and repeatedly get scanned to see if they could be reclaimed, wasting a lot of time when there was memory pressure. This fix does more checks on the locks to see if they are actually likely to be removable from cache. Signed-off-by: Benjamin Marzinski Signed-off-by: Steven Whitehouse --- fs/gfs2/glock.c | 72 ++++++++++++++++++++++++++++++++++++--------------------- 1 file changed, 46 insertions(+), 26 deletions(-) diff --git a/fs/gfs2/glock.c b/fs/gfs2/glock.c index 827136ee794..f041a89e1ab 100644 --- a/fs/gfs2/glock.c +++ b/fs/gfs2/glock.c @@ -173,6 +173,26 @@ static void gfs2_glock_hold(struct gfs2_glock *gl) atomic_inc(&gl->gl_ref); } +/** + * demote_ok - Check to see if it's ok to unlock a glock + * @gl: the glock + * + * Returns: 1 if it's ok + */ + +static int demote_ok(const struct gfs2_glock *gl) +{ + const struct gfs2_glock_operations *glops = gl->gl_ops; + + if (gl->gl_state == LM_ST_UNLOCKED) + return 0; + if (!list_empty(&gl->gl_holders)) + return 0; + if (glops->go_demote_ok) + return glops->go_demote_ok(gl); + return 1; +} + /** * gfs2_glock_schedule_for_reclaim - Add a glock to the reclaim list * @gl: the glock @@ -181,14 +201,34 @@ static void gfs2_glock_hold(struct gfs2_glock *gl) static void gfs2_glock_schedule_for_reclaim(struct gfs2_glock *gl) { + int may_reclaim; + may_reclaim = (demote_ok(gl) && + (atomic_read(&gl->gl_ref) == 1 || + (gl->gl_name.ln_type == LM_TYPE_INODE && + atomic_read(&gl->gl_ref) <= 2))); spin_lock(&lru_lock); - if (list_empty(&gl->gl_lru) && gl->gl_state != LM_ST_UNLOCKED) { + if (list_empty(&gl->gl_lru) && may_reclaim) { list_add_tail(&gl->gl_lru, &lru_list); atomic_inc(&lru_count); } spin_unlock(&lru_lock); } +/** + * gfs2_glock_put_nolock() - Decrement reference count on glock + * @gl: The glock to put + * + * This function should only be used if the caller has its own reference + * to the glock, in addition to the one it is dropping. + */ + +static void gfs2_glock_put_nolock(struct gfs2_glock *gl) +{ + if (atomic_dec_and_test(&gl->gl_ref)) + GLOCK_BUG_ON(gl, 1); + gfs2_glock_schedule_for_reclaim(gl); +} + /** * gfs2_glock_put() - Decrement reference count on glock * @gl: The glock to put @@ -214,9 +254,9 @@ int gfs2_glock_put(struct gfs2_glock *gl) rv = 1; goto out; } - /* 1 for being hashed, 1 for having state != LM_ST_UNLOCKED */ - if (atomic_read(&gl->gl_ref) == 2) - gfs2_glock_schedule_for_reclaim(gl); + spin_lock(&gl->gl_spin); + gfs2_glock_schedule_for_reclaim(gl); + spin_unlock(&gl->gl_spin); write_unlock(gl_lock_addr(gl->gl_hash)); out: return rv; @@ -398,7 +438,7 @@ static void state_change(struct gfs2_glock *gl, unsigned int new_state) if (held2) gfs2_glock_hold(gl); else - gfs2_glock_put(gl); + gfs2_glock_put_nolock(gl); } gl->gl_state = new_state; @@ -633,7 +673,7 @@ out: out_sched: gfs2_glock_hold(gl); if (queue_delayed_work(glock_workqueue, &gl->gl_work, 0) == 0) - gfs2_glock_put(gl); + gfs2_glock_put_nolock(gl); out_unlock: clear_bit(GLF_LOCK, &gl->gl_flags); goto out; @@ -1274,26 +1314,6 @@ void gfs2_glock_complete(struct gfs2_glock *gl, int ret) gfs2_glock_put(gl); } -/** - * demote_ok - Check to see if it's ok to unlock a glock - * @gl: the glock - * - * Returns: 1 if it's ok - */ - -static int demote_ok(const struct gfs2_glock *gl) -{ - const struct gfs2_glock_operations *glops = gl->gl_ops; - - if (gl->gl_state == LM_ST_UNLOCKED) - return 0; - if (!list_empty(&gl->gl_holders)) - return 0; - if (glops->go_demote_ok) - return glops->go_demote_ok(gl); - return 1; -} - static int gfs2_shrink_glock_memory(int nr, gfp_t gfp_mask) { -- cgit v1.2.3 From 6b94617024bd6810cde1d0d491202c30d5a38d91 Mon Sep 17 00:00:00 2001 From: Benjamin Marzinski Date: Fri, 10 Jul 2009 18:13:26 -0500 Subject: GFS2: Fix incorrent statfs consistency check Since both linked and unlinked inodes are counted by rgd->rd_dinodes, It makes no sense to count them with the used data blocks (first check that I changed), it makes sense to count them with the linked inodes (second check), and it makes no sense to care if there are more unlinked inodes than linked ones. This fixes these errors. Signed-off-by: Benjamin Marzinski Signed-off-by: Steven Whitehouse --- fs/gfs2/rgrp.c | 14 +++----------- 1 file changed, 3 insertions(+), 11 deletions(-) diff --git a/fs/gfs2/rgrp.c b/fs/gfs2/rgrp.c index 5e5074176da..fba795798d3 100644 --- a/fs/gfs2/rgrp.c +++ b/fs/gfs2/rgrp.c @@ -285,27 +285,19 @@ void gfs2_rgrp_verify(struct gfs2_rgrpd *rgd) } tmp = rgd->rd_data - rgd->rd_free - rgd->rd_dinodes; - if (count[1] + count[2] != tmp) { + if (count[1] != tmp) { if (gfs2_consist_rgrpd(rgd)) fs_err(sdp, "used data mismatch: %u != %u\n", count[1], tmp); return; } - if (count[3] != rgd->rd_dinodes) { + if (count[2] + count[3] != rgd->rd_dinodes) { if (gfs2_consist_rgrpd(rgd)) fs_err(sdp, "used metadata mismatch: %u != %u\n", - count[3], rgd->rd_dinodes); + count[2] + count[3], rgd->rd_dinodes); return; } - - if (count[2] > count[3]) { - if (gfs2_consist_rgrpd(rgd)) - fs_err(sdp, "unlinked inodes > inodes: %u\n", - count[2]); - return; - } - } static inline int rgrp_contains_block(struct gfs2_rgrpd *rgd, u64 block) -- cgit v1.2.3 From b94a170e96dc416828af9d350ae2e34b70ae7347 Mon Sep 17 00:00:00 2001 From: Benjamin Marzinski Date: Thu, 23 Jul 2009 18:52:34 -0500 Subject: GFS2: remove dcache entries for remote deleted inodes When a file is deleted from a gfs2 filesystem on one node, a dcache entry for it may still exist on other nodes in the cluster. If this happens, gfs2 will be unable to free this file on disk. Because of this, it's possible to have a gfs2 filesystem with no files on it and no free space. With this patch, when a node receives a callback notifying it that the file is being deleted on another node, it schedules a new workqueue thread to remove the file's dcache entry. Signed-off-by: Benjamin Marzinski Signed-off-by: Steven Whitehouse --- fs/gfs2/glock.c | 43 ++++++++++++++++++++++++++++++++++++++----- fs/gfs2/glock.h | 3 +++ fs/gfs2/glops.c | 21 +++++++++++++++++++++ fs/gfs2/incore.h | 2 ++ fs/gfs2/super.c | 1 + 5 files changed, 65 insertions(+), 5 deletions(-) diff --git a/fs/gfs2/glock.c b/fs/gfs2/glock.c index f041a89e1ab..8b674b1f3a5 100644 --- a/fs/gfs2/glock.c +++ b/fs/gfs2/glock.c @@ -63,6 +63,7 @@ static void do_xmote(struct gfs2_glock *gl, struct gfs2_holder *gh, unsigned int static DECLARE_RWSEM(gfs2_umount_flush_sem); static struct dentry *gfs2_root; static struct workqueue_struct *glock_workqueue; +struct workqueue_struct *gfs2_delete_workqueue; static LIST_HEAD(lru_list); static atomic_t lru_count = ATOMIC_INIT(0); static DEFINE_SPINLOCK(lru_lock); @@ -167,7 +168,7 @@ static void glock_free(struct gfs2_glock *gl) * */ -static void gfs2_glock_hold(struct gfs2_glock *gl) +void gfs2_glock_hold(struct gfs2_glock *gl) { GLOCK_BUG_ON(gl, atomic_read(&gl->gl_ref) == 0); atomic_inc(&gl->gl_ref); @@ -222,7 +223,7 @@ static void gfs2_glock_schedule_for_reclaim(struct gfs2_glock *gl) * to the glock, in addition to the one it is dropping. */ -static void gfs2_glock_put_nolock(struct gfs2_glock *gl) +void gfs2_glock_put_nolock(struct gfs2_glock *gl) { if (atomic_dec_and_test(&gl->gl_ref)) GLOCK_BUG_ON(gl, 1); @@ -679,6 +680,29 @@ out_unlock: goto out; } +static void delete_work_func(struct work_struct *work) +{ + struct gfs2_glock *gl = container_of(work, struct gfs2_glock, gl_delete); + struct gfs2_sbd *sdp = gl->gl_sbd; + struct gfs2_inode *ip = NULL; + struct inode *inode; + u64 no_addr = 0; + + spin_lock(&gl->gl_spin); + ip = (struct gfs2_inode *)gl->gl_object; + if (ip) + no_addr = ip->i_no_addr; + spin_unlock(&gl->gl_spin); + if (ip) { + inode = gfs2_ilookup(sdp->sd_vfs, no_addr); + if (inode) { + d_prune_aliases(inode); + iput(inode); + } + } + gfs2_glock_put(gl); +} + static void glock_work_func(struct work_struct *work) { unsigned long delay = 0; @@ -757,6 +781,7 @@ int gfs2_glock_get(struct gfs2_sbd *sdp, u64 number, gl->gl_sbd = sdp; gl->gl_aspace = NULL; INIT_DELAYED_WORK(&gl->gl_work, glock_work_func); + INIT_WORK(&gl->gl_delete, delete_work_func); /* If this glock protects actual on-disk data or metadata blocks, create a VFS inode to manage the pages/buffers holding them. */ @@ -898,6 +923,8 @@ static void handle_callback(struct gfs2_glock *gl, unsigned int state, gl->gl_demote_state != state) { gl->gl_demote_state = LM_ST_UNLOCKED; } + if (gl->gl_ops->go_callback) + gl->gl_ops->go_callback(gl); trace_gfs2_demote_rq(gl); } @@ -1344,14 +1371,14 @@ static int gfs2_shrink_glock_memory(int nr, gfp_t gfp_mask) spin_unlock(&lru_lock); spin_lock(&gl->gl_spin); may_demote = demote_ok(gl); - spin_unlock(&gl->gl_spin); - clear_bit(GLF_LOCK, &gl->gl_flags); if (may_demote) { handle_callback(gl, LM_ST_UNLOCKED, 0); nr--; } if (queue_delayed_work(glock_workqueue, &gl->gl_work, 0) == 0) - gfs2_glock_put(gl); + gfs2_glock_put_nolock(gl); + spin_unlock(&gl->gl_spin); + clear_bit(GLF_LOCK, &gl->gl_flags); spin_lock(&lru_lock); continue; } @@ -1738,6 +1765,11 @@ int __init gfs2_glock_init(void) glock_workqueue = create_workqueue("glock_workqueue"); if (IS_ERR(glock_workqueue)) return PTR_ERR(glock_workqueue); + gfs2_delete_workqueue = create_workqueue("delete_workqueue"); + if (IS_ERR(gfs2_delete_workqueue)) { + destroy_workqueue(glock_workqueue); + return PTR_ERR(gfs2_delete_workqueue); + } register_shrinker(&glock_shrinker); @@ -1748,6 +1780,7 @@ void gfs2_glock_exit(void) { unregister_shrinker(&glock_shrinker); destroy_workqueue(glock_workqueue); + destroy_workqueue(gfs2_delete_workqueue); } static int gfs2_glock_iter_next(struct gfs2_glock_iter *gi) diff --git a/fs/gfs2/glock.h b/fs/gfs2/glock.h index a602a28f6f0..c609894ec0d 100644 --- a/fs/gfs2/glock.h +++ b/fs/gfs2/glock.h @@ -143,6 +143,7 @@ struct lm_lockops { #define GLR_TRYFAILED 13 +extern struct workqueue_struct *gfs2_delete_workqueue; static inline struct gfs2_holder *gfs2_glock_is_locked_by_me(struct gfs2_glock *gl) { struct gfs2_holder *gh; @@ -191,6 +192,8 @@ static inline int gfs2_glock_is_blocking(struct gfs2_glock *gl) int gfs2_glock_get(struct gfs2_sbd *sdp, u64 number, const struct gfs2_glock_operations *glops, int create, struct gfs2_glock **glp); +void gfs2_glock_hold(struct gfs2_glock *gl); +void gfs2_glock_put_nolock(struct gfs2_glock *gl); int gfs2_glock_put(struct gfs2_glock *gl); void gfs2_holder_init(struct gfs2_glock *gl, unsigned int state, unsigned flags, struct gfs2_holder *gh); diff --git a/fs/gfs2/glops.c b/fs/gfs2/glops.c index d5e4ab155ca..6985eef06c3 100644 --- a/fs/gfs2/glops.c +++ b/fs/gfs2/glops.c @@ -323,6 +323,7 @@ static void trans_go_sync(struct gfs2_glock *gl) if (gl->gl_state != LM_ST_UNLOCKED && test_bit(SDF_JOURNAL_LIVE, &sdp->sd_flags)) { + flush_workqueue(gfs2_delete_workqueue); gfs2_meta_syncfs(sdp); gfs2_log_shutdown(sdp); } @@ -372,6 +373,25 @@ static int trans_go_demote_ok(const struct gfs2_glock *gl) return 0; } +/** + * iopen_go_callback - schedule the dcache entry for the inode to be deleted + * @gl: the glock + * + * gl_spin lock is held while calling this + */ +static void iopen_go_callback(struct gfs2_glock *gl) +{ + struct gfs2_inode *ip = (struct gfs2_inode *)gl->gl_object; + + if (gl->gl_demote_state == LM_ST_UNLOCKED && + gl->gl_state == LM_ST_SHARED && + ip && test_bit(GIF_USER, &ip->i_flags)) { + gfs2_glock_hold(gl); + if (queue_work(gfs2_delete_workqueue, &gl->gl_delete) == 0) + gfs2_glock_put_nolock(gl); + } +} + const struct gfs2_glock_operations gfs2_meta_glops = { .go_type = LM_TYPE_META, }; @@ -406,6 +426,7 @@ const struct gfs2_glock_operations gfs2_trans_glops = { const struct gfs2_glock_operations gfs2_iopen_glops = { .go_type = LM_TYPE_IOPEN, + .go_callback = iopen_go_callback, }; const struct gfs2_glock_operations gfs2_flock_glops = { diff --git a/fs/gfs2/incore.h b/fs/gfs2/incore.h index 225347fbff3..61801ada36f 100644 --- a/fs/gfs2/incore.h +++ b/fs/gfs2/incore.h @@ -159,6 +159,7 @@ struct gfs2_glock_operations { int (*go_lock) (struct gfs2_holder *gh); void (*go_unlock) (struct gfs2_holder *gh); int (*go_dump)(struct seq_file *seq, const struct gfs2_glock *gl); + void (*go_callback) (struct gfs2_glock *gl); const int go_type; const unsigned long go_min_hold_time; }; @@ -228,6 +229,7 @@ struct gfs2_glock { struct list_head gl_ail_list; atomic_t gl_ail_count; struct delayed_work gl_work; + struct work_struct gl_delete; }; #define GFS2_MIN_LVB_SIZE 32 /* Min size of LVB that gfs2 supports */ diff --git a/fs/gfs2/super.c b/fs/gfs2/super.c index 552e321cee5..f522bb01797 100644 --- a/fs/gfs2/super.c +++ b/fs/gfs2/super.c @@ -691,6 +691,7 @@ static int gfs2_make_fs_ro(struct gfs2_sbd *sdp) struct gfs2_holder t_gh; int error; + flush_workqueue(gfs2_delete_workqueue); gfs2_quota_sync(sdp); gfs2_statfs_sync(sdp); -- cgit v1.2.3 From 276e680d192a67d222fcea51af37b056feffb665 Mon Sep 17 00:00:00 2001 From: Yan Zheng Date: Thu, 30 Jul 2009 09:40:40 -0400 Subject: Btrfs: preserve commit_root for async caching The async block group caching code uses the commit_root pointer to get a stable version of the extent allocation tree for scanning. This copy of the tree root isn't going to change and it significantly reduces the complexity of the scanning code. During a commit, we have a loop where we update the extent allocation tree root. We need to loop because updating the root pointer in the tree of tree roots may allocate blocks which may change the extent allocation tree. Right now the commit_root pointer is changed inside this loop. It is more correct to change the commit_root pointer only after all the looping is done. Signed-off-by: Yan Zheng Signed-off-by: Chris Mason --- fs/btrfs/ctree.h | 4 +--- fs/btrfs/disk-io.c | 2 +- fs/btrfs/extent-tree.c | 6 +++--- fs/btrfs/transaction.c | 12 +++++++++--- 4 files changed, 14 insertions(+), 10 deletions(-) diff --git a/fs/btrfs/ctree.h b/fs/btrfs/ctree.h index 17ad92c29cf..38eeb6c49c8 100644 --- a/fs/btrfs/ctree.h +++ b/fs/btrfs/ctree.h @@ -827,6 +827,7 @@ struct btrfs_fs_info { struct mutex drop_mutex; struct mutex volume_mutex; struct mutex tree_reloc_mutex; + struct rw_semaphore extent_commit_sem; /* * this protects the ordered operations list only while we are @@ -961,9 +962,6 @@ struct btrfs_root { /* the node lock is held while changing the node pointer */ spinlock_t node_lock; - /* taken when updating the commit root */ - struct rw_semaphore commit_root_sem; - struct extent_buffer *commit_root; struct btrfs_root *log_root; struct btrfs_root *reloc_root; diff --git a/fs/btrfs/disk-io.c b/fs/btrfs/disk-io.c index 3a9b8875988..3cf4cfa575c 100644 --- a/fs/btrfs/disk-io.c +++ b/fs/btrfs/disk-io.c @@ -907,7 +907,6 @@ static int __setup_root(u32 nodesize, u32 leafsize, u32 sectorsize, spin_lock_init(&root->inode_lock); mutex_init(&root->objectid_mutex); mutex_init(&root->log_mutex); - init_rwsem(&root->commit_root_sem); init_waitqueue_head(&root->log_writer_wait); init_waitqueue_head(&root->log_commit_wait[0]); init_waitqueue_head(&root->log_commit_wait[1]); @@ -1624,6 +1623,7 @@ struct btrfs_root *open_ctree(struct super_block *sb, mutex_init(&fs_info->cleaner_mutex); mutex_init(&fs_info->volume_mutex); mutex_init(&fs_info->tree_reloc_mutex); + init_rwsem(&fs_info->extent_commit_sem); btrfs_init_free_cluster(&fs_info->meta_alloc_cluster); btrfs_init_free_cluster(&fs_info->data_alloc_cluster); diff --git a/fs/btrfs/extent-tree.c b/fs/btrfs/extent-tree.c index fadf69a2764..2fe21fa7491 100644 --- a/fs/btrfs/extent-tree.c +++ b/fs/btrfs/extent-tree.c @@ -267,7 +267,7 @@ static int caching_kthread(void *data) last = max_t(u64, block_group->key.objectid, BTRFS_SUPER_INFO_OFFSET); again: /* need to make sure the commit_root doesn't disappear */ - down_read(&fs_info->extent_root->commit_root_sem); + down_read(&fs_info->extent_commit_sem); /* * We don't want to deadlock with somebody trying to allocate a new @@ -304,7 +304,7 @@ again: if (need_resched()) { btrfs_release_path(fs_info->extent_root, path); - up_read(&fs_info->extent_root->commit_root_sem); + up_read(&fs_info->extent_commit_sem); cond_resched(); goto again; } @@ -345,7 +345,7 @@ next: err: btrfs_free_path(path); - up_read(&fs_info->extent_root->commit_root_sem); + up_read(&fs_info->extent_commit_sem); atomic_dec(&block_group->space_info->caching_threads); wake_up(&block_group->caching_q); diff --git a/fs/btrfs/transaction.c b/fs/btrfs/transaction.c index e51d2bc532f..de48e4ec808 100644 --- a/fs/btrfs/transaction.c +++ b/fs/btrfs/transaction.c @@ -42,10 +42,8 @@ static noinline void put_transaction(struct btrfs_transaction *transaction) static noinline void switch_commit_root(struct btrfs_root *root) { - down_write(&root->commit_root_sem); free_extent_buffer(root->commit_root); root->commit_root = btrfs_root_node(root); - up_write(&root->commit_root_sem); } /* @@ -466,7 +464,10 @@ static int update_cowonly_root(struct btrfs_trans_handle *trans, ret = btrfs_write_dirty_block_groups(trans, root); BUG_ON(ret); } - switch_commit_root(root); + + if (root != root->fs_info->extent_root) + switch_commit_root(root); + return 0; } @@ -499,6 +500,11 @@ static noinline int commit_cowonly_roots(struct btrfs_trans_handle *trans, update_cowonly_root(trans, root); } + + down_write(&fs_info->extent_commit_sem); + switch_commit_root(fs_info->extent_root); + up_write(&fs_info->extent_commit_sem); + return 0; } -- cgit v1.2.3 From f36f3042eae238bdaefe7c79310afe573bfc3622 Mon Sep 17 00:00:00 2001 From: Chris Mason Date: Thu, 30 Jul 2009 10:04:48 -0400 Subject: Btrfs: be more polite in the async caching threads The semaphore used by the async caching threads can prevent a transaction commit, which can make the FS appear to stall. This releases the semaphore more often when a transaction commit is in progress. Signed-off-by: Chris Mason --- fs/btrfs/extent-tree.c | 5 +++-- fs/btrfs/transaction.c | 10 ++++++++++ fs/btrfs/transaction.h | 1 + 3 files changed, 14 insertions(+), 2 deletions(-) diff --git a/fs/btrfs/extent-tree.c b/fs/btrfs/extent-tree.c index 2fe21fa7491..dc84daee6bc 100644 --- a/fs/btrfs/extent-tree.c +++ b/fs/btrfs/extent-tree.c @@ -302,10 +302,11 @@ again: else if (ret) break; - if (need_resched()) { + if (need_resched() || + btrfs_transaction_in_commit(fs_info)) { btrfs_release_path(fs_info->extent_root, path); up_read(&fs_info->extent_commit_sem); - cond_resched(); + schedule_timeout(1); goto again; } diff --git a/fs/btrfs/transaction.c b/fs/btrfs/transaction.c index de48e4ec808..cdbb5022da5 100644 --- a/fs/btrfs/transaction.c +++ b/fs/btrfs/transaction.c @@ -857,6 +857,16 @@ static void update_super_roots(struct btrfs_root *root) super->root_level = root_item->level; } +int btrfs_transaction_in_commit(struct btrfs_fs_info *info) +{ + int ret = 0; + spin_lock(&info->new_trans_lock); + if (info->running_transaction) + ret = info->running_transaction->in_commit; + spin_unlock(&info->new_trans_lock); + return ret; +} + int btrfs_commit_transaction(struct btrfs_trans_handle *trans, struct btrfs_root *root) { diff --git a/fs/btrfs/transaction.h b/fs/btrfs/transaction.h index 961c3ee5a2e..663c6740491 100644 --- a/fs/btrfs/transaction.h +++ b/fs/btrfs/transaction.h @@ -107,4 +107,5 @@ int btrfs_record_root_in_trans(struct btrfs_trans_handle *trans, struct btrfs_root *root); int btrfs_write_and_wait_marked_extents(struct btrfs_root *root, struct extent_io_tree *dirty_pages); +int btrfs_transaction_in_commit(struct btrfs_fs_info *info); #endif -- cgit v1.2.3 From 4bf17af0dbfe4cf20cb750e22e8e926273e7a7a4 Mon Sep 17 00:00:00 2001 From: Jan Kara Date: Tue, 14 Jul 2009 19:30:23 +0200 Subject: udf: Fix loading of VAT inode when drive wrongly reports number of recorded blocks VAT inode is located in the last block recorded block of the medium. When the drive errorneously reports number of recorded blocks, we failed to load the VAT inode and thus mount the medium. This patch makes kernel try to read VAT inode from the last block of the device if it is different from the last recorded block. Signed-off-by: Jan Kara --- fs/udf/super.c | 12 ++++++++++++ 1 file changed, 12 insertions(+) diff --git a/fs/udf/super.c b/fs/udf/super.c index 6832135159b..9d1b8c2e6c4 100644 --- a/fs/udf/super.c +++ b/fs/udf/super.c @@ -1087,11 +1087,23 @@ static int udf_load_vat(struct super_block *sb, int p_index, int type1_index) struct udf_inode_info *vati; uint32_t pos; struct virtualAllocationTable20 *vat20; + sector_t blocks = sb->s_bdev->bd_inode->i_size >> sb->s_blocksize_bits; /* VAT file entry is in the last recorded block */ ino.partitionReferenceNum = type1_index; ino.logicalBlockNum = sbi->s_last_block - map->s_partition_root; sbi->s_vat_inode = udf_iget(sb, &ino); + if (!sbi->s_vat_inode && + sbi->s_last_block != blocks - 1) { + printk(KERN_NOTICE "UDF-fs: Failed to read VAT inode from the" + " last recorded block (%lu), retrying with the last " + "block of the device (%lu).\n", + (unsigned long)sbi->s_last_block, + (unsigned long)blocks - 1); + ino.partitionReferenceNum = type1_index; + ino.logicalBlockNum = blocks - 1 - map->s_partition_root; + sbi->s_vat_inode = udf_iget(sb, &ino); + } if (!sbi->s_vat_inode) return 1; -- cgit v1.2.3 From dee865656f2d8b866f8ac22c60d6363b914e9f12 Mon Sep 17 00:00:00 2001 From: Jan Kara Date: Wed, 22 Jul 2009 18:12:17 +0200 Subject: quota: Silence lockdep on quota_on Commit d01730d74d2b0155da50d44555001706294014f7 didn't completely fix the problem since we still take dqio_mutex and i_mutex in the wrong order. Move taking of i_mutex further down (luckily it's needed only for updating inode flags) below where dqio_mutex is taken. Tested-by: Valdis Kletnieks Signed-off-by: Jan Kara --- fs/quota/dquot.c | 7 ++++--- 1 file changed, 4 insertions(+), 3 deletions(-) diff --git a/fs/quota/dquot.c b/fs/quota/dquot.c index 70f36c043d6..38f7bd559f3 100644 --- a/fs/quota/dquot.c +++ b/fs/quota/dquot.c @@ -2043,7 +2043,6 @@ static int vfs_load_quota_inode(struct inode *inode, int type, int format_id, invalidate_bdev(sb->s_bdev); } mutex_lock(&dqopt->dqonoff_mutex); - mutex_lock_nested(&inode->i_mutex, I_MUTEX_QUOTA); if (sb_has_quota_loaded(sb, type)) { error = -EBUSY; goto out_lock; @@ -2054,9 +2053,11 @@ static int vfs_load_quota_inode(struct inode *inode, int type, int format_id, * possible) Also nobody should write to the file - we use * special IO operations which ignore the immutable bit. */ down_write(&dqopt->dqptr_sem); + mutex_lock_nested(&inode->i_mutex, I_MUTEX_QUOTA); oldflags = inode->i_flags & (S_NOATIME | S_IMMUTABLE | S_NOQUOTA); inode->i_flags |= S_NOQUOTA | S_NOATIME | S_IMMUTABLE; + mutex_unlock(&inode->i_mutex); up_write(&dqopt->dqptr_sem); sb->dq_op->drop(inode); } @@ -2080,7 +2081,6 @@ static int vfs_load_quota_inode(struct inode *inode, int type, int format_id, goto out_file_init; } mutex_unlock(&dqopt->dqio_mutex); - mutex_unlock(&inode->i_mutex); spin_lock(&dq_state_lock); dqopt->flags |= dquot_state_flag(flags, type); spin_unlock(&dq_state_lock); @@ -2096,13 +2096,14 @@ out_file_init: out_lock: if (oldflags != -1) { down_write(&dqopt->dqptr_sem); + mutex_lock_nested(&inode->i_mutex, I_MUTEX_QUOTA); /* Set the flags back (in the case of accidental quotaon() * on a wrong file we don't want to mess up the flags) */ inode->i_flags &= ~(S_NOATIME | S_NOQUOTA | S_IMMUTABLE); inode->i_flags |= oldflags; + mutex_unlock(&inode->i_mutex); up_write(&dqopt->dqptr_sem); } - mutex_unlock(&inode->i_mutex); mutex_unlock(&dqopt->dqonoff_mutex); out_fmt: put_quota_format(fmt); -- cgit v1.2.3 From b0e66522f4d86713b0450255210e26c4f11ee86b Mon Sep 17 00:00:00 2001 From: Ben Dooks Date: Thu, 30 Jul 2009 23:23:20 +0100 Subject: ARM: S3C24XX: Add BWSCON per-bank information. Add definitions and an accessor macro to deal with reading bus information from S3C2410_BWSCON for any given numbered bank. Signed-off-by: Ben Dooks Signed-off-by: Ben Dooks --- arch/arm/mach-s3c2410/include/mach/regs-mem.h | 10 ++++++++++ 1 file changed, 10 insertions(+) diff --git a/arch/arm/mach-s3c2410/include/mach/regs-mem.h b/arch/arm/mach-s3c2410/include/mach/regs-mem.h index 57759804e2f..7f7c5294796 100644 --- a/arch/arm/mach-s3c2410/include/mach/regs-mem.h +++ b/arch/arm/mach-s3c2410/include/mach/regs-mem.h @@ -73,6 +73,16 @@ #define S3C2410_BWSCON_WS7 (1<<30) #define S3C2410_BWSCON_ST7 (1<<31) +/* accesor functions for getting BANK(n) configuration. (n != 0) */ + +#define S3C2410_BWSCON_GET(_bwscon, _bank) (((_bwscon) >> ((_bank) * 4)) & 0xf) + +#define S3C2410_BWSCON_DW8 (0) +#define S3C2410_BWSCON_DW16 (1) +#define S3C2410_BWSCON_DW32 (2) +#define S3C2410_BWSCON_WS (1 << 2) +#define S3C2410_BWSCON_ST (1 << 3) + /* memory set (rom, ram) */ #define S3C2410_BANKCON0 S3C2410_MEMREG(0x0004) #define S3C2410_BANKCON1 S3C2410_MEMREG(0x0008) -- cgit v1.2.3 From 2e4ea6e8209e0c1d93c69c34c32002337b3f747e Mon Sep 17 00:00:00 2001 From: Ben Dooks Date: Thu, 30 Jul 2009 23:23:21 +0100 Subject: ARM: S3C24XX: CPUFREQ: Add core support. Add the core of the support for enabling the CPUFreq driver on all S3C24XX based systems. Signed-off-by: Ben Dooks Signed-off-by: Ben Dooks --- arch/arm/plat-s3c24xx/Makefile | 2 + arch/arm/plat-s3c24xx/cpu-freq.c | 704 +++++++++++++++++++++ arch/arm/plat-s3c24xx/include/plat/cpu-freq-core.h | 183 ++++++ 3 files changed, 889 insertions(+) create mode 100644 arch/arm/plat-s3c24xx/cpu-freq.c create mode 100644 arch/arm/plat-s3c24xx/include/plat/cpu-freq-core.h diff --git a/arch/arm/plat-s3c24xx/Makefile b/arch/arm/plat-s3c24xx/Makefile index 579a165c282..1f6add552bd 100644 --- a/arch/arm/plat-s3c24xx/Makefile +++ b/arch/arm/plat-s3c24xx/Makefile @@ -20,6 +20,8 @@ obj-y += gpiolib.o obj-y += clock.o obj-$(CONFIG_S3C24XX_DCLK) += clock-dclk.o +obj-$(CONFIG_CPU_FREQ_S3C24XX) += cpu-freq.o + # Architecture dependant builds obj-$(CONFIG_CPU_S3C244X) += s3c244x.o diff --git a/arch/arm/plat-s3c24xx/cpu-freq.c b/arch/arm/plat-s3c24xx/cpu-freq.c new file mode 100644 index 00000000000..40ff7e2569d --- /dev/null +++ b/arch/arm/plat-s3c24xx/cpu-freq.c @@ -0,0 +1,704 @@ +/* linux/arch/arm/plat-s3c24xx/cpu-freq.c + * + * Copyright (c) 2006,2007,2008 Simtec Electronics + * http://armlinux.simtec.co.uk/ + * Ben Dooks + * + * S3C24XX CPU Frequency scaling + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include + +#include +#include +#include + +#include + +/* note, cpufreq support deals in kHz, no Hz */ + +static struct cpufreq_driver s3c24xx_driver; +static struct s3c_cpufreq_config cpu_cur; +static struct s3c_iotimings s3c24xx_iotiming; +static struct cpufreq_frequency_table *pll_reg; +static unsigned int last_target = ~0; +static unsigned int ftab_size; +static struct cpufreq_frequency_table *ftab; + +static struct clk *_clk_mpll; +static struct clk *_clk_xtal; +static struct clk *clk_fclk; +static struct clk *clk_hclk; +static struct clk *clk_pclk; +static struct clk *clk_arm; + +static void s3c_cpufreq_getcur(struct s3c_cpufreq_config *cfg) +{ + unsigned long fclk, pclk, hclk, armclk; + + cfg->freq.fclk = fclk = clk_get_rate(clk_fclk); + cfg->freq.hclk = hclk = clk_get_rate(clk_hclk); + cfg->freq.pclk = pclk = clk_get_rate(clk_pclk); + cfg->freq.armclk = armclk = clk_get_rate(clk_arm); + + cfg->pll.index = __raw_readl(S3C2410_MPLLCON); + cfg->pll.frequency = fclk; + + cfg->freq.hclk_tns = 1000000000 / (cfg->freq.hclk / 10); + + cfg->divs.h_divisor = fclk / hclk; + cfg->divs.p_divisor = fclk / pclk; +} + +static inline void s3c_cpufreq_calc(struct s3c_cpufreq_config *cfg) +{ + unsigned long pll = cfg->pll.frequency; + + cfg->freq.fclk = pll; + cfg->freq.hclk = pll / cfg->divs.h_divisor; + cfg->freq.pclk = pll / cfg->divs.p_divisor; + + /* convert hclk into 10ths of nanoseconds for io calcs */ + cfg->freq.hclk_tns = 1000000000 / (cfg->freq.hclk / 10); +} + +static inline int closer(unsigned int target, unsigned int n, unsigned int c) +{ + int diff_cur = abs(target - c); + int diff_new = abs(target - n); + + return (diff_new < diff_cur); +} + +static void s3c_cpufreq_show(const char *pfx, + struct s3c_cpufreq_config *cfg) +{ + s3c_freq_dbg("%s: Fvco=%u, F=%lu, A=%lu, H=%lu (%u), P=%lu (%u)\n", + pfx, cfg->pll.frequency, cfg->freq.fclk, cfg->freq.armclk, + cfg->freq.hclk, cfg->divs.h_divisor, + cfg->freq.pclk, cfg->divs.p_divisor); +} + +/* functions to wrapper the driver info calls to do the cpu specific work */ + +static void s3c_cpufreq_setio(struct s3c_cpufreq_config *cfg) +{ + if (cfg->info->set_iotiming) + (cfg->info->set_iotiming)(cfg, &s3c24xx_iotiming); +} + +static int s3c_cpufreq_calcio(struct s3c_cpufreq_config *cfg) +{ + if (cfg->info->calc_iotiming) + return (cfg->info->calc_iotiming)(cfg, &s3c24xx_iotiming); + + return 0; +} + +static void s3c_cpufreq_setrefresh(struct s3c_cpufreq_config *cfg) +{ + (cfg->info->set_refresh)(cfg); +} + +static void s3c_cpufreq_setdivs(struct s3c_cpufreq_config *cfg) +{ + (cfg->info->set_divs)(cfg); +} + +static int s3c_cpufreq_calcdivs(struct s3c_cpufreq_config *cfg) +{ + return (cfg->info->calc_divs)(cfg); +} + +static void s3c_cpufreq_setfvco(struct s3c_cpufreq_config *cfg) +{ + (cfg->info->set_fvco)(cfg); +} + +static inline void s3c_cpufreq_resume_clocks(void) +{ + cpu_cur.info->resume_clocks(); +} + +static inline void s3c_cpufreq_updateclk(struct clk *clk, + unsigned int freq) +{ + clk_set_rate(clk, freq); +} + +static int s3c_cpufreq_settarget(struct cpufreq_policy *policy, + unsigned int target_freq, + struct cpufreq_frequency_table *pll) +{ + struct s3c_cpufreq_freqs freqs; + struct s3c_cpufreq_config cpu_new; + unsigned long flags; + + cpu_new = cpu_cur; /* copy new from current */ + + s3c_cpufreq_show("cur", &cpu_cur); + + /* TODO - check for DMA currently outstanding */ + + cpu_new.pll = pll ? *pll : cpu_cur.pll; + + if (pll) + freqs.pll_changing = 1; + + /* update our frequencies */ + + cpu_new.freq.armclk = target_freq; + cpu_new.freq.fclk = cpu_new.pll.frequency; + + if (s3c_cpufreq_calcdivs(&cpu_new) < 0) { + printk(KERN_ERR "no divisors for %d\n", target_freq); + goto err_notpossible; + } + + s3c_freq_dbg("%s: got divs\n", __func__); + + s3c_cpufreq_calc(&cpu_new); + + s3c_freq_dbg("%s: calculated frequencies for new\n", __func__); + + if (cpu_new.freq.hclk != cpu_cur.freq.hclk) { + if (s3c_cpufreq_calcio(&cpu_new) < 0) { + printk(KERN_ERR "%s: no IO timings\n", __func__); + goto err_notpossible; + } + } + + s3c_cpufreq_show("new", &cpu_new); + + /* setup our cpufreq parameters */ + + freqs.old = cpu_cur.freq; + freqs.new = cpu_new.freq; + + freqs.freqs.cpu = 0; + freqs.freqs.old = cpu_cur.freq.armclk / 1000; + freqs.freqs.new = cpu_new.freq.armclk / 1000; + + /* update f/h/p clock settings before we issue the change + * notification, so that drivers do not need to do anything + * special if they want to recalculate on CPUFREQ_PRECHANGE. */ + + s3c_cpufreq_updateclk(_clk_mpll, cpu_new.pll.frequency); + s3c_cpufreq_updateclk(clk_fclk, cpu_new.freq.fclk); + s3c_cpufreq_updateclk(clk_hclk, cpu_new.freq.hclk); + s3c_cpufreq_updateclk(clk_pclk, cpu_new.freq.pclk); + + /* start the frequency change */ + + if (policy) + cpufreq_notify_transition(&freqs.freqs, CPUFREQ_PRECHANGE); + + /* If hclk is staying the same, then we do not need to + * re-write the IO or the refresh timings whilst we are changing + * speed. */ + + local_irq_save(flags); + + /* is our memory clock slowing down? */ + if (cpu_new.freq.hclk < cpu_cur.freq.hclk) { + s3c_cpufreq_setrefresh(&cpu_new); + s3c_cpufreq_setio(&cpu_new); + } + + if (cpu_new.freq.fclk == cpu_cur.freq.fclk) { + /* not changing PLL, just set the divisors */ + + s3c_cpufreq_setdivs(&cpu_new); + } else { + if (cpu_new.freq.fclk < cpu_cur.freq.fclk) { + /* slow the cpu down, then set divisors */ + + s3c_cpufreq_setfvco(&cpu_new); + s3c_cpufreq_setdivs(&cpu_new); + } else { + /* set the divisors, then speed up */ + + s3c_cpufreq_setdivs(&cpu_new); + s3c_cpufreq_setfvco(&cpu_new); + } + } + + /* did our memory clock speed up */ + if (cpu_new.freq.hclk > cpu_cur.freq.hclk) { + s3c_cpufreq_setrefresh(&cpu_new); + s3c_cpufreq_setio(&cpu_new); + } + + /* update our current settings */ + cpu_cur = cpu_new; + + local_irq_restore(flags); + + /* notify everyone we've done this */ + if (policy) + cpufreq_notify_transition(&freqs.freqs, CPUFREQ_POSTCHANGE); + + s3c_freq_dbg("%s: finished\n", __func__); + return 0; + + err_notpossible: + printk(KERN_ERR "no compatible settings for %d\n", target_freq); + return -EINVAL; +} + +/* s3c_cpufreq_target + * + * called by the cpufreq core to adjust the frequency that the CPU + * is currently running at. + */ + +static int s3c_cpufreq_target(struct cpufreq_policy *policy, + unsigned int target_freq, + unsigned int relation) +{ + struct cpufreq_frequency_table *pll; + unsigned int index; + + /* avoid repeated calls which cause a needless amout of duplicated + * logging output (and CPU time as the calculation process is + * done) */ + if (target_freq == last_target) + return 0; + + last_target = target_freq; + + s3c_freq_dbg("%s: policy %p, target %u, relation %u\n", + __func__, policy, target_freq, relation); + + if (ftab) { + if (cpufreq_frequency_table_target(policy, ftab, + target_freq, relation, + &index)) { + s3c_freq_dbg("%s: table failed\n", __func__); + return -EINVAL; + } + + s3c_freq_dbg("%s: adjust %d to entry %d (%u)\n", __func__, + target_freq, index, ftab[index].frequency); + target_freq = ftab[index].frequency; + } + + target_freq *= 1000; /* convert target to Hz */ + + /* find the settings for our new frequency */ + + if (!pll_reg || cpu_cur.lock_pll) { + /* either we've not got any PLL values, or we've locked + * to the current one. */ + pll = NULL; + } else { + struct cpufreq_policy tmp_policy; + int ret; + + /* we keep the cpu pll table in Hz, to ensure we get an + * accurate value for the PLL output. */ + + tmp_policy.min = policy->min * 1000; + tmp_policy.max = policy->max * 1000; + tmp_policy.cpu = policy->cpu; + + /* cpufreq_frequency_table_target uses a pointer to 'index' + * which is the number of the table entry, not the value of + * the table entry's index field. */ + + ret = cpufreq_frequency_table_target(&tmp_policy, pll_reg, + target_freq, relation, + &index); + + if (ret < 0) { + printk(KERN_ERR "%s: no PLL available\n", __func__); + goto err_notpossible; + } + + pll = pll_reg + index; + + s3c_freq_dbg("%s: target %u => %u\n", + __func__, target_freq, pll->frequency); + + target_freq = pll->frequency; + } + + return s3c_cpufreq_settarget(policy, target_freq, pll); + + err_notpossible: + printk(KERN_ERR "no compatible settings for %d\n", target_freq); + return -EINVAL; +} + +static unsigned int s3c_cpufreq_get(unsigned int cpu) +{ + return clk_get_rate(clk_arm) / 1000; +} + +struct clk *s3c_cpufreq_clk_get(struct device *dev, const char *name) +{ + struct clk *clk; + + clk = clk_get(dev, name); + if (IS_ERR(clk)) + printk(KERN_ERR "cpufreq: failed to get clock '%s'\n", name); + + return clk; +} + +static int s3c_cpufreq_init(struct cpufreq_policy *policy) +{ + printk(KERN_INFO "%s: initialising policy %p\n", __func__, policy); + + if (policy->cpu != 0) + return -EINVAL; + + policy->cur = s3c_cpufreq_get(0); + policy->min = policy->cpuinfo.min_freq = 0; + policy->max = policy->cpuinfo.max_freq = cpu_cur.info->max.fclk / 1000; + policy->governor = CPUFREQ_DEFAULT_GOVERNOR; + + /* feed the latency information from the cpu driver */ + policy->cpuinfo.transition_latency = cpu_cur.info->latency; + + if (ftab) + cpufreq_frequency_table_cpuinfo(policy, ftab); + + return 0; +} + +static __init int s3c_cpufreq_initclks(void) +{ + _clk_mpll = s3c_cpufreq_clk_get(NULL, "mpll"); + _clk_xtal = s3c_cpufreq_clk_get(NULL, "xtal"); + clk_fclk = s3c_cpufreq_clk_get(NULL, "fclk"); + clk_hclk = s3c_cpufreq_clk_get(NULL, "hclk"); + clk_pclk = s3c_cpufreq_clk_get(NULL, "pclk"); + clk_arm = s3c_cpufreq_clk_get(NULL, "armclk"); + + if (IS_ERR(clk_fclk) || IS_ERR(clk_hclk) || IS_ERR(clk_pclk) || + IS_ERR(_clk_mpll) || IS_ERR(clk_arm) || IS_ERR(_clk_xtal)) { + printk(KERN_ERR "%s: could not get clock(s)\n", __func__); + return -ENOENT; + } + + printk(KERN_INFO "%s: clocks f=%lu,h=%lu,p=%lu,a=%lu\n", __func__, + clk_get_rate(clk_fclk) / 1000, + clk_get_rate(clk_hclk) / 1000, + clk_get_rate(clk_pclk) / 1000, + clk_get_rate(clk_arm) / 1000); + + return 0; +} + +static int s3c_cpufreq_verify(struct cpufreq_policy *policy) +{ + if (policy->cpu != 0) + return -EINVAL; + + return 0; +} + +#ifdef CONFIG_PM +static struct cpufreq_frequency_table suspend_pll; +static unsigned int suspend_freq; + +static int s3c_cpufreq_suspend(struct cpufreq_policy *policy, pm_message_t pmsg) +{ + suspend_pll.frequency = clk_get_rate(_clk_mpll); + suspend_pll.index = __raw_readl(S3C2410_MPLLCON); + suspend_freq = s3c_cpufreq_get(0) * 1000; + + return 0; +} + +static int s3c_cpufreq_resume(struct cpufreq_policy *policy) +{ + int ret; + + s3c_freq_dbg("%s: resuming with policy %p\n", __func__, policy); + + last_target = ~0; /* invalidate last_target setting */ + + /* first, find out what speed we resumed at. */ + s3c_cpufreq_resume_clocks(); + + /* whilst we will be called later on, we try and re-set the + * cpu frequencies as soon as possible so that we do not end + * up resuming devices and then immediatley having to re-set + * a number of settings once these devices have restarted. + * + * as a note, it is expected devices are not used until they + * have been un-suspended and at that time they should have + * used the updated clock settings. + */ + + ret = s3c_cpufreq_settarget(NULL, suspend_freq, &suspend_pll); + if (ret) { + printk(KERN_ERR "%s: failed to reset pll/freq\n", __func__); + return ret; + } + + return 0; +} +#else +#define s3c_cpufreq_resume NULL +#define s3c_cpufreq_suspend NULL +#endif + +static struct cpufreq_driver s3c24xx_driver = { + .flags = CPUFREQ_STICKY, + .verify = s3c_cpufreq_verify, + .target = s3c_cpufreq_target, + .get = s3c_cpufreq_get, + .init = s3c_cpufreq_init, + .suspend = s3c_cpufreq_suspend, + .resume = s3c_cpufreq_resume, + .name = "s3c24xx", +}; + + +int __init s3c_cpufreq_register(struct s3c_cpufreq_info *info) +{ + if (!info || !info->name) { + printk(KERN_ERR "%s: failed to pass valid information\n", + __func__); + return -EINVAL; + } + + printk(KERN_INFO "S3C24XX CPU Frequency driver, %s cpu support\n", + info->name); + + /* check our driver info has valid data */ + + BUG_ON(info->set_refresh == NULL); + BUG_ON(info->set_divs == NULL); + BUG_ON(info->calc_divs == NULL); + + /* info->set_fvco is optional, depending on whether there + * is a need to set the clock code. */ + + cpu_cur.info = info; + + /* Note, driver registering should probably update locktime */ + + return 0; +} + +int __init s3c_cpufreq_setboard(struct s3c_cpufreq_board *board) +{ + struct s3c_cpufreq_board *ours; + + if (!board) { + printk(KERN_INFO "%s: no board data\n", __func__); + return -EINVAL; + } + + /* Copy the board information so that each board can make this + * initdata. */ + + ours = kzalloc(sizeof(struct s3c_cpufreq_board), GFP_KERNEL); + if (ours == NULL) { + printk(KERN_ERR "%s: no memory\n", __func__); + return -ENOMEM; + } + + *ours = *board; + cpu_cur.board = ours; + + return 0; +} + +int __init s3c_cpufreq_auto_io(void) +{ + int ret; + + if (!cpu_cur.info->get_iotiming) { + printk(KERN_ERR "%s: get_iotiming undefined\n", __func__); + return -ENOENT; + } + + printk(KERN_INFO "%s: working out IO settings\n", __func__); + + ret = (cpu_cur.info->get_iotiming)(&cpu_cur, &s3c24xx_iotiming); + if (ret) + printk(KERN_ERR "%s: failed to get timings\n", __func__); + + return ret; +} + +/* if one or is zero, then return the other, otherwise return the min */ +#define do_min(_a, _b) ((_a) == 0 ? (_b) : (_b) == 0 ? (_a) : min(_a, _b)) + +/** + * s3c_cpufreq_freq_min - find the minimum settings for the given freq. + * @dst: The destination structure + * @a: One argument. + * @b: The other argument. + * + * Create a minimum of each frequency entry in the 'struct s3c_freq', + * unless the entry is zero when it is ignored and the non-zero argument + * used. + */ +static void s3c_cpufreq_freq_min(struct s3c_freq *dst, + struct s3c_freq *a, struct s3c_freq *b) +{ + dst->fclk = do_min(a->fclk, b->fclk); + dst->hclk = do_min(a->hclk, b->hclk); + dst->pclk = do_min(a->pclk, b->pclk); + dst->armclk = do_min(a->armclk, b->armclk); +} + +static inline u32 calc_locktime(u32 freq, u32 time_us) +{ + u32 result; + + result = freq * time_us; + result = DIV_ROUND_UP(result, 1000 * 1000); + + return result; +} + +static void s3c_cpufreq_update_loctkime(void) +{ + unsigned int bits = cpu_cur.info->locktime_bits; + u32 rate = (u32)clk_get_rate(_clk_xtal); + u32 val; + + if (bits == 0) { + WARN_ON(1); + return; + } + + val = calc_locktime(rate, cpu_cur.info->locktime_u) << bits; + val |= calc_locktime(rate, cpu_cur.info->locktime_m); + + printk(KERN_INFO "%s: new locktime is 0x%08x\n", __func__, val); + __raw_writel(val, S3C2410_LOCKTIME); +} + +static int s3c_cpufreq_build_freq(void) +{ + int size, ret; + + if (!cpu_cur.info->calc_freqtable) + return -EINVAL; + + kfree(ftab); + ftab = NULL; + + size = cpu_cur.info->calc_freqtable(&cpu_cur, NULL, 0); + size++; + + ftab = kmalloc(sizeof(struct cpufreq_frequency_table) * size, GFP_KERNEL); + if (!ftab) { + printk(KERN_ERR "%s: no memory for tables\n", __func__); + return -ENOMEM; + } + + ftab_size = size; + + ret = cpu_cur.info->calc_freqtable(&cpu_cur, ftab, size); + s3c_cpufreq_addfreq(ftab, ret, size, CPUFREQ_TABLE_END); + + return 0; +} + +static int __init s3c_cpufreq_initcall(void) +{ + int ret = 0; + + if (cpu_cur.info && cpu_cur.board) { + ret = s3c_cpufreq_initclks(); + if (ret) + goto out; + + /* get current settings */ + s3c_cpufreq_getcur(&cpu_cur); + s3c_cpufreq_show("cur", &cpu_cur); + + if (cpu_cur.board->auto_io) { + ret = s3c_cpufreq_auto_io(); + if (ret) { + printk(KERN_ERR "%s: failed to get io timing\n", + __func__); + goto out; + } + } + + if (cpu_cur.board->need_io && !cpu_cur.info->set_iotiming) { + printk(KERN_ERR "%s: no IO support registered\n", + __func__); + ret = -EINVAL; + goto out; + } + + if (!cpu_cur.info->need_pll) + cpu_cur.lock_pll = 1; + + s3c_cpufreq_update_loctkime(); + + s3c_cpufreq_freq_min(&cpu_cur.max, &cpu_cur.board->max, + &cpu_cur.info->max); + + if (cpu_cur.info->calc_freqtable) + s3c_cpufreq_build_freq(); + + ret = cpufreq_register_driver(&s3c24xx_driver); + } + + out: + return ret; +} + +late_initcall(s3c_cpufreq_initcall); + +/** + * s3c_plltab_register - register CPU PLL table. + * @plls: The list of PLL entries. + * @plls_no: The size of the PLL entries @plls. + * + * Register the given set of PLLs with the system. + */ +int __init s3c_plltab_register(struct cpufreq_frequency_table *plls, + unsigned int plls_no) +{ + struct cpufreq_frequency_table *vals; + unsigned int size; + + size = sizeof(struct cpufreq_frequency_table) * (plls_no + 1); + + vals = kmalloc(size, GFP_KERNEL); + if (vals) { + memcpy(vals, plls, size); + pll_reg = vals; + + /* write a terminating entry, we don't store it in the + * table that is stored in the kernel */ + vals += plls_no; + vals->frequency = CPUFREQ_TABLE_END; + + printk(KERN_INFO "cpufreq: %d PLL entries\n", plls_no); + } else + printk(KERN_ERR "cpufreq: no memory for PLL tables\n"); + + return vals ? 0 : -ENOMEM; +} diff --git a/arch/arm/plat-s3c24xx/include/plat/cpu-freq-core.h b/arch/arm/plat-s3c24xx/include/plat/cpu-freq-core.h new file mode 100644 index 00000000000..e078821b360 --- /dev/null +++ b/arch/arm/plat-s3c24xx/include/plat/cpu-freq-core.h @@ -0,0 +1,183 @@ +/* arch/arm/plat-s3c/include/plat/cpu-freq.h + * + * Copyright (c) 2006,2007,2009 Simtec Electronics + * http://armlinux.simtec.co.uk/ + * Ben Dooks + * + * S3C CPU frequency scaling support - core support + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#include + +#define MAX_BANKS (8) +#define S3C2412_MAX_IO (8) + +/** + * struct s3c2410_iobank_timing - IO bank timings for S3C2410 style timings + * @bankcon: The cached version of settings in this structure. + * @tacp: + * @tacs: Time from address valid to nCS asserted. + * @tcos: Time from nCS asserted to nOE or nWE asserted. + * @tacc: Time that nOE or nWE is asserted. + * @tcoh: Time nCS is held after nOE or nWE are released. + * @tcah: Time address is held for after + * @nwait_en: Whether nWAIT is enabled for this bank. + * + * This structure represents the IO timings for a S3C2410 style IO bank + * used by the CPU frequency support if it needs to change the settings + * of the IO. + */ +struct s3c2410_iobank_timing { + unsigned long bankcon; + unsigned int tacp; + unsigned int tacs; + unsigned int tcos; + unsigned int tacc; + unsigned int tcoh; /* nCS hold afrer nOE/nWE */ + unsigned int tcah; /* Address hold after nCS */ + unsigned char nwait_en; /* nWait enabled for bank. */ +}; + +union s3c_iobank { + struct s3c2410_iobank_timing *io_2410; +}; + +/** + * struct s3c_iotimings - Chip IO timings holder + * @bank: The timings for each IO bank. + */ +struct s3c_iotimings { + union s3c_iobank bank[MAX_BANKS]; +}; + +/** + * struct s3c_plltab - PLL table information. + * @vals: List of PLL values. + * @size: Size of the PLL table @vals. + */ +struct s3c_plltab { + struct s3c_pllval *vals; + int size; +}; + +/** + * struct s3c_cpufreq_info - Information for the CPU frequency driver. + * @name: The name of this implementation. + * @max: The maximum frequencies for the system. + * @latency: Transition latency to give to cpufreq. + * @locktime_m: The lock-time in uS for the MPLL. + * @locktime_u: The lock-time in uS for the UPLL. + * @locttime_bits: The number of bits each LOCKTIME field. + * @need_pll: Set if this driver needs to change the PLL values to acheive + * any frequency changes. This is really only need by devices like the + * S3C2410 where there is no or limited divider between the PLL and the + * ARMCLK. + * @resume_clocks: Update the clocks on resume. + * @get_iotiming: Get the current IO timing data, mainly for use at start. + * @set_iotiming: Update the IO timings from the cached copies calculated + * from the @calc_iotiming entry when changing the frequency. + * @calc_iotiming: Calculate and update the cached copies of the IO timings + * from the newly calculated frequencies. + * @calc_freqtable: Calculate (fill in) the given frequency table from the + * current frequency configuration. If the table passed in is NULL, + * then the return is the number of elements to be filled for allocation + * of the table. + * @set_refresh: Set the memory refresh configuration. + * @set_fvco: Set the PLL frequencies. + * @set_divs: Update the clock divisors. + * @calc_divs: Calculate the clock divisors. + */ +struct s3c_cpufreq_info { + const char *name; + struct s3c_freq max; + + unsigned int latency; + + unsigned int locktime_m; + unsigned int locktime_u; + unsigned char locktime_bits; + + unsigned int need_pll:1; + + /* driver routines */ + + void (*resume_clocks)(void); + + int (*get_iotiming)(struct s3c_cpufreq_config *cfg, + struct s3c_iotimings *timings); + + void (*set_iotiming)(struct s3c_cpufreq_config *cfg, + struct s3c_iotimings *timings); + + int (*calc_iotiming)(struct s3c_cpufreq_config *cfg, + struct s3c_iotimings *timings); + + int (*calc_freqtable)(struct s3c_cpufreq_config *cfg, + struct cpufreq_frequency_table *t, + size_t table_size); + + void (*set_refresh)(struct s3c_cpufreq_config *cfg); + void (*set_fvco)(struct s3c_cpufreq_config *cfg); + void (*set_divs)(struct s3c_cpufreq_config *cfg); + int (*calc_divs)(struct s3c_cpufreq_config *cfg); +}; + +extern int s3c_cpufreq_register(struct s3c_cpufreq_info *info); + +extern int s3c_plltab_register(struct cpufreq_frequency_table *plls, unsigned int plls_no); + +/* Useful utility functions. */ + +extern struct clk *s3c_cpufreq_clk_get(struct device *, const char *); + +/* S3C2410 and compatible exported functions */ + +extern void s3c2410_cpufreq_setrefresh(struct s3c_cpufreq_config *cfg); + +extern int s3c2410_iotiming_calc(struct s3c_cpufreq_config *cfg, + struct s3c_iotimings *iot); + +extern int s3c2410_iotiming_get(struct s3c_cpufreq_config *cfg, + struct s3c_iotimings *timings); + +extern void s3c2410_iotiming_set(struct s3c_cpufreq_config *cfg, + struct s3c_iotimings *iot); + +extern void s3c2410_set_fvco(struct s3c_cpufreq_config *cfg); + +#ifdef CONFIG_CPU_FREQ_S3C24XX_DEBUG +#define s3c_freq_dbg(x...) printk(KERN_INFO x) +#else +#define s3c_freq_dbg(x...) do { if (0) printk(x); } while (0) +#endif /* CONFIG_CPU_FREQ_S3C24XX_DEBUG */ + +#ifdef CONFIG_CPU_FREQ_S3C24XX_IODEBUG +#define s3c_freq_iodbg(x...) printk(KERN_INFO x) +#else +#define s3c_freq_iodbg(x...) do { if (0) printk(x); } while (0) +#endif /* CONFIG_CPU_FREQ_S3C24XX_IODEBUG */ + +static inline int s3c_cpufreq_addfreq(struct cpufreq_frequency_table *table, + int index, size_t table_size, + unsigned int freq) +{ + if (index < 0) + return index; + + if (table) { + if (index >= table_size) + return -ENOMEM; + + s3c_freq_dbg("%s: { %d = %u kHz }\n", + __func__, index, freq); + + table[index].index = index; + table[index].frequency = freq; + } + + return index + 1; +} -- cgit v1.2.3 From ea5fe9aedf512d20b75b7dcfd54ab99ae5c0934b Mon Sep 17 00:00:00 2001 From: Ben Dooks Date: Thu, 30 Jul 2009 23:23:22 +0100 Subject: ARM: S3C: CPUFREQ: Documentation for cpufreq header Update arch/arm/plat-s3c/include/plat/cpu-freq.h to include kerneldoc style documentation. Signed-off-by: Ben Dooks Signed-off-by: Ben Dooks --- arch/arm/plat-s3c/include/plat/cpu-freq.h | 91 +++++++++++++++++++++++++++---- 1 file changed, 81 insertions(+), 10 deletions(-) diff --git a/arch/arm/plat-s3c/include/plat/cpu-freq.h b/arch/arm/plat-s3c/include/plat/cpu-freq.h index c86a13307e9..0ba7670fd07 100644 --- a/arch/arm/plat-s3c/include/plat/cpu-freq.h +++ b/arch/arm/plat-s3c/include/plat/cpu-freq.h @@ -17,6 +17,21 @@ struct s3c_cpufreq_info; struct s3c_cpufreq_board; struct s3c_iotimings; +/** + * struct s3c_freq - frequency information (mainly for core drivers) + * @fclk: The FCLK frequency in Hz. + * @armclk: The ARMCLK frequency in Hz. + * @hclk_tns: HCLK cycle time in 10ths of nano-seconds. + * @hclk: The HCLK frequency in Hz. + * @pclk: The PCLK frequency in Hz. + * + * This contains the frequency information about the current configuration + * mainly for the core drivers to ensure we do not end up passing about + * a large number of parameters. + * + * The @hclk_tns field is a useful cache for the parts of the drivers that + * need to calculate IO timings and suchlike. + */ struct s3c_freq { unsigned long fclk; unsigned long armclk; @@ -25,33 +40,75 @@ struct s3c_freq { unsigned long pclk; }; -/* wrapper 'struct cpufreq_freqs' so that any drivers receiving the +/** + * struct s3c_cpufreq_freqs - s3c cpufreq notification information. + * @freqs: The cpufreq setting information. + * @old: The old clock settings. + * @new: The new clock settings. + * @pll_changing: Set if the PLL is changing. + * + * Wrapper 'struct cpufreq_freqs' so that any drivers receiving the * notification can use this information that is not provided by just * having the core frequency alone. + * + * The pll_changing flag is used to indicate if the PLL itself is + * being set during this change. This is important as the clocks + * will temporarily be set to the XTAL clock during this time, so + * drivers may want to close down their output during this time. + * + * Note, this is not being used by any current drivers and therefore + * may be removed in the future. */ - struct s3c_cpufreq_freqs { struct cpufreq_freqs freqs; struct s3c_freq old; struct s3c_freq new; + + unsigned int pll_changing:1; }; #define to_s3c_cpufreq(_cf) container_of(_cf, struct s3c_cpufreq_freqs, freqs) +/** + * struct s3c_clkdivs - clock divisor information + * @p_divisor: Divisor from FCLK to PCLK. + * @h_divisor: Divisor from FCLK to HCLK. + * @arm_divisor: Divisor from FCLK to ARMCLK (not all CPUs). + * @dvs: Non-zero if using DVS mode for ARMCLK. + * + * Divisor settings for the core clocks. + */ struct s3c_clkdivs { - int p_divisor; /* fclk / pclk */ - int h_divisor; /* fclk / hclk */ - int arm_divisor; /* not all cpus have this. */ - unsigned char dvs; /* using dvs mode to arm. */ + int p_divisor; + int h_divisor; + int arm_divisor; + unsigned char dvs; }; #define PLLVAL(_m, _p, _s) (((_m) << 12) | ((_p) << 4) | (_s)) +/** + * struct s3c_pllval - PLL value entry. + * @freq: The frequency for this entry in Hz. + * @pll_reg: The PLL register setting for this PLL value. + */ struct s3c_pllval { unsigned long freq; unsigned long pll_reg; }; +/** + * struct s3c_cpufreq_config - current cpu frequency configuration + * @freq: The current settings for the core clocks. + * @pll: The PLL table entry for the current PLL settings. + * @divs: The divisor settings for the core clocks. + * @info: The current core driver information. + * @board: The information for the board we are running on. + * + * This is for the core drivers that need to know information about + * the current settings and values. It should not be needed by any + * device drivers. +*/ struct s3c_cpufreq_config { struct s3c_freq freq; struct s3c_pllval pll; @@ -60,13 +117,27 @@ struct s3c_cpufreq_config { struct s3c_cpufreq_board *board; }; -/* s3c_cpufreq_board +/** + * struct s3c_cpufreq_board - per-board cpu frequency informatin + * @refresh: The SDRAM refresh period in nanoseconds. + * @auto_io: Set if the IO timing settings should be generated from the + * initialisation time hardware registers. + * @need_io: Set if the board has external IO on any of the chipselect + * lines that will require the hardware timing registers to be + * updated on a clock change. + * @max: The maxium frequency limits for the system. Any field that + * is left at zero will use the CPU's settings. + * + * This contains the board specific settings that affect how the CPU + * drivers chose settings. These include the memory refresh and IO + * timing information. * - * per-board configuraton information, such as memory refresh and - * how to initialise IO timings. + * Registration depends on the driver being used, the ARMCLK only + * implementation does not currently need this but the older style + * driver requires this to be available. */ struct s3c_cpufreq_board { - unsigned int refresh; /* refresh period in ns */ + unsigned int refresh; unsigned int auto_io:1; /* automatically init io timings. */ unsigned int need_io:1; /* set if needs io timing support. */ -- cgit v1.2.3 From d6fc87d3f7d236892e4d0003a07cd2b5171e5e27 Mon Sep 17 00:00:00 2001 From: Ben Dooks Date: Thu, 30 Jul 2009 23:23:23 +0100 Subject: ARM: S3C: CPUFREQ: Move struct s3c_cpufreq_config to cpu-freq-core.h Move the structure s3c_cpufreq_config from cpu-freq.h to the less advertised cpu-freq-core.h as it is not needed by anything outside the core drivers. Signed-off-by: Ben Dooks Signed-off-by: Ben Dooks --- arch/arm/plat-s3c/include/plat/cpu-freq.h | 20 ----------------- arch/arm/plat-s3c24xx/include/plat/cpu-freq-core.h | 25 ++++++++++++++++++++++ 2 files changed, 25 insertions(+), 20 deletions(-) diff --git a/arch/arm/plat-s3c/include/plat/cpu-freq.h b/arch/arm/plat-s3c/include/plat/cpu-freq.h index 0ba7670fd07..7b982b7f28c 100644 --- a/arch/arm/plat-s3c/include/plat/cpu-freq.h +++ b/arch/arm/plat-s3c/include/plat/cpu-freq.h @@ -97,26 +97,6 @@ struct s3c_pllval { unsigned long pll_reg; }; -/** - * struct s3c_cpufreq_config - current cpu frequency configuration - * @freq: The current settings for the core clocks. - * @pll: The PLL table entry for the current PLL settings. - * @divs: The divisor settings for the core clocks. - * @info: The current core driver information. - * @board: The information for the board we are running on. - * - * This is for the core drivers that need to know information about - * the current settings and values. It should not be needed by any - * device drivers. -*/ -struct s3c_cpufreq_config { - struct s3c_freq freq; - struct s3c_pllval pll; - struct s3c_clkdivs divs; - struct s3c_cpufreq_info *info; /* for core, not drivers */ - struct s3c_cpufreq_board *board; -}; - /** * struct s3c_cpufreq_board - per-board cpu frequency informatin * @refresh: The SDRAM refresh period in nanoseconds. diff --git a/arch/arm/plat-s3c24xx/include/plat/cpu-freq-core.h b/arch/arm/plat-s3c24xx/include/plat/cpu-freq-core.h index e078821b360..7938fb0bc38 100644 --- a/arch/arm/plat-s3c24xx/include/plat/cpu-freq-core.h +++ b/arch/arm/plat-s3c24xx/include/plat/cpu-freq-core.h @@ -64,6 +64,31 @@ struct s3c_plltab { int size; }; +/** + * struct s3c_cpufreq_config - current cpu frequency configuration + * @freq: The current settings for the core clocks. + * @max: Maxium settings, derived from core, board and user settings. + * @pll: The PLL table entry for the current PLL settings. + * @divs: The divisor settings for the core clocks. + * @info: The current core driver information. + * @board: The information for the board we are running on. + * @lock_pll: Set if the PLL settings cannot be changed. + * + * This is for the core drivers that need to know information about + * the current settings and values. It should not be needed by any + * device drivers. +*/ +struct s3c_cpufreq_config { + struct s3c_freq freq; + struct s3c_freq max; + struct cpufreq_frequency_table pll; + struct s3c_clkdivs divs; + struct s3c_cpufreq_info *info; /* for core, not drivers */ + struct s3c_cpufreq_board *board; + + unsigned int lock_pll:1; +}; + /** * struct s3c_cpufreq_info - Information for the CPU frequency driver. * @name: The name of this implementation. -- cgit v1.2.3 From 89c52ed4687faca6bf0eabf6d46eaee4a14376b3 Mon Sep 17 00:00:00 2001 From: Ben Dooks Date: Thu, 30 Jul 2009 23:23:24 +0100 Subject: ARM: Add ARCH_HAS_CPUFREQ for presence of CPUFREQ driver Add ARCH_HAS_CPUFREQ so that each machine config can select it if they have CPUFREQ driver support. This means that the CPUFREQ specific area does not need the if statement updating each time a new machine is added. Signed-off-by: Ben Dooks Signed-off-by: Ben Dooks --- arch/arm/Kconfig | 14 +++++++++++++- 1 file changed, 13 insertions(+), 1 deletion(-) diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index aef63c8e3d2..7dbaabd8df3 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -126,6 +126,13 @@ config ARCH_HAS_ILOG2_U32 config ARCH_HAS_ILOG2_U64 bool +config ARCH_HAS_CPUFREQ + bool + help + Internal node to signify that the ARCH has CPUFREQ support + and that the relevant menu configurations are displayed for + it. + config GENERIC_HWEIGHT bool default y @@ -203,6 +210,7 @@ config ARCH_AAEC2000 config ARCH_INTEGRATOR bool "ARM Ltd. Integrator family" select ARM_AMBA + select ARCH_HAS_CPUFREQ select HAVE_CLK select COMMON_CLKDEV select ICST525 @@ -509,6 +517,7 @@ config ARCH_PXA bool "PXA2xx/PXA3xx-based" depends on MMU select ARCH_MTD_XIP + select ARCH_HAS_CPUFREQ select GENERIC_GPIO select HAVE_CLK select COMMON_CLKDEV @@ -551,6 +560,7 @@ config ARCH_SA1100 select ISA select ARCH_SPARSEMEM_ENABLE select ARCH_MTD_XIP + select ARCH_HAS_CPUFREQ select GENERIC_GPIO select GENERIC_TIME select GENERIC_CLOCKEVENTS @@ -573,6 +583,7 @@ config ARCH_S3C64XX bool "Samsung S3C64XX" select GENERIC_GPIO select HAVE_CLK + select ARCH_HAS_CPUFREQ help Samsung S3C64XX series based systems @@ -632,6 +643,7 @@ config ARCH_OMAP select GENERIC_GPIO select HAVE_CLK select ARCH_REQUIRE_GPIOLIB + select ARCH_HAS_CPUFREQ select GENERIC_TIME select GENERIC_CLOCKEVENTS help @@ -1241,7 +1253,7 @@ endmenu menu "CPU Power Management" -if (ARCH_SA1100 || ARCH_INTEGRATOR || ARCH_OMAP || ARCH_PXA || ARCH_S3C64XX) +if ARCH_HAS_CPUFREQ source "drivers/cpufreq/Kconfig" -- cgit v1.2.3 From 9d56c02a5a171e1fdb87f3b718b418cb0522d2b1 Mon Sep 17 00:00:00 2001 From: Ben Dooks Date: Thu, 30 Jul 2009 23:23:25 +0100 Subject: ARM: Add S3C24XX to CPUFreq KConfig Add the S3C24XX to the main ARM CPUFreq Kconfig support list. Signed-off-by: Ben Dooks Signed-off-by: Ben Dooks --- arch/arm/Kconfig | 41 +++++++++++++++++++++++++++++++++++++++++ 1 file changed, 41 insertions(+) diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index 7dbaabd8df3..c7a83efef0b 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -573,6 +573,7 @@ config ARCH_SA1100 config ARCH_S3C2410 bool "Samsung S3C2410, S3C2412, S3C2413, S3C2440, S3C2442, S3C2443" select GENERIC_GPIO + select ARCH_HAS_CPUFREQ select HAVE_CLK help Samsung S3C2410X CPU based systems, such as the Simtec Electronics @@ -1288,6 +1289,46 @@ config CPU_FREQ_S3C64XX bool "CPUfreq support for Samsung S3C64XX CPUs" depends on CPU_FREQ && CPU_S3C6410 +config CPU_FREQ_S3C + bool + help + Internal configuration node for common cpufreq on Samsung SoC + +config CPU_FREQ_S3C24XX + bool "CPUfreq driver for Samsung S3C24XX series CPUs" + depends on ARCH_S3C2410 && CPU_FREQ && EXPERIMENTAL + select CPU_FREQ_S3C + help + This enables the CPUfreq driver for the Samsung S3C24XX family + of CPUs. + + For details, take a look at . + + If in doubt, say N. + +config CPU_FREQ_S3C24XX_PLL + bool "Support CPUfreq changing of PLL frequency" + depends on CPU_FREQ_S3C24XX && EXPERIMENTAL + help + Compile in support for changing the PLL frequency from the + S3C24XX series CPUfreq driver. The PLL takes time to settle + after a frequency change, so by default it is not enabled. + + This also means that the PLL tables for the selected CPU(s) will + be built which may increase the size of the kernel image. + +config CPU_FREQ_S3C24XX_DEBUG + bool "Debug CPUfreq Samsung driver core" + depends on CPU_FREQ_S3C24XX + help + Enable s3c_freq_dbg for the Samsung S3C CPUfreq core + +config CPU_FREQ_S3C24XX_IODEBUG + bool "Debug CPUfreq Samsung driver IO timing" + depends on CPU_FREQ_S3C24XX + help + Enable s3c_freq_iodbg for the Samsung S3C CPUfreq core + endif source "drivers/cpuidle/Kconfig" -- cgit v1.2.3 From 831a6fcb9393960b35173fa2e0f835b710152fff Mon Sep 17 00:00:00 2001 From: Ben Dooks Date: Thu, 30 Jul 2009 23:23:26 +0100 Subject: ARM: S3C2410: CPUFREQ: Add io-timing support. Add io-timing support for frequency scaling on the S3C2410 SoC. Signed-off-by: Ben Dooks Signed-off-by: Ben Dooks --- arch/arm/plat-s3c24xx/Kconfig | 9 + arch/arm/plat-s3c24xx/Makefile | 1 + arch/arm/plat-s3c24xx/s3c2410-iotiming.c | 432 +++++++++++++++++++++++++++++++ 3 files changed, 442 insertions(+) create mode 100644 arch/arm/plat-s3c24xx/s3c2410-iotiming.c diff --git a/arch/arm/plat-s3c24xx/Kconfig b/arch/arm/plat-s3c24xx/Kconfig index 5b0bc914f58..d82d30c2f05 100644 --- a/arch/arm/plat-s3c24xx/Kconfig +++ b/arch/arm/plat-s3c24xx/Kconfig @@ -107,6 +107,15 @@ config S3C24XX_SPI_BUS1_GPG5_GPG6_GPG7 # common code for s3c24xx based machines, such as the SMDKs. +# cpu frequency items common between s3c2410 and s3c2440/s3c2442 + +config S3C2410_IOTIMING + bool + depends on CPU_FREQ_S3C24XX + help + Internal node to select io timing code that is common to the s3c2410 + and s3c2440/s3c2442 cpu frequency support. + config MACH_SMDK bool help diff --git a/arch/arm/plat-s3c24xx/Makefile b/arch/arm/plat-s3c24xx/Makefile index 1f6add552bd..6f9afd13ab4 100644 --- a/arch/arm/plat-s3c24xx/Makefile +++ b/arch/arm/plat-s3c24xx/Makefile @@ -35,6 +35,7 @@ obj-$(CONFIG_S3C24XX_PWM) += pwm.o obj-$(CONFIG_S3C2410_CLOCK) += s3c2410-clock.o obj-$(CONFIG_S3C2410_DMA) += dma.o obj-$(CONFIG_S3C24XX_ADC) += adc.o +obj-$(CONFIG_S3C2410_IOTIMING) += s3c2410-iotiming.o # device specific setup and/or initialisation obj-$(CONFIG_ARCH_S3C2410) += setup-i2c.o diff --git a/arch/arm/plat-s3c24xx/s3c2410-iotiming.c b/arch/arm/plat-s3c24xx/s3c2410-iotiming.c new file mode 100644 index 00000000000..26fe2129cf2 --- /dev/null +++ b/arch/arm/plat-s3c24xx/s3c2410-iotiming.c @@ -0,0 +1,432 @@ +/* linux/arch/arm/plat-s3c24xx/s3c2410-iotiming.c + * + * Copyright (c) 2006,2008,2009 Simtec Electronics + * http://armlinux.simtec.co.uk/ + * Ben Dooks + * + * S3C24XX CPU Frequency scaling - IO timing for S3C2410/S3C2440/S3C2442 + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#include +#include +#include +#include +#include + +#include +#include +#include + +#include + +#define print_ns(x) ((x) / 10), ((x) % 10) + +/** + * s3c2410_print_timing - print bank timing data for debug purposes + * @pfx: The prefix to put on the output + * @timings: The timing inforamtion to print. +*/ +static void s3c2410_print_timing(const char *pfx, + struct s3c_iotimings *timings) +{ + struct s3c2410_iobank_timing *bt; + int bank; + + for (bank = 0; bank < MAX_BANKS; bank++) { + bt = timings->bank[bank].io_2410; + if (!bt) + continue; + + printk(KERN_DEBUG "%s %d: Tacs=%d.%d, Tcos=%d.%d, Tacc=%d.%d, " + "Tcoh=%d.%d, Tcah=%d.%d\n", pfx, bank, + print_ns(bt->tacs), + print_ns(bt->tcos), + print_ns(bt->tacc), + print_ns(bt->tcoh), + print_ns(bt->tcah)); + } +} + +/** + * bank_reg - convert bank number to pointer to the control register. + * @bank: The IO bank number. + */ +static inline void __iomem *bank_reg(unsigned int bank) +{ + return S3C2410_BANKCON0 + (bank << 2); +} + +/** + * bank_is_io - test whether bank is used for IO + * @bankcon: The bank control register. + * + * This is a simplistic test to see if any BANKCON[x] is not an IO + * bank. It currently does not take into account whether BWSCON has + * an illegal width-setting in it, or if the pin connected to nCS[x] + * is actually being handled as a chip-select. + */ +static inline int bank_is_io(unsigned long bankcon) +{ + return !(bankcon & S3C2410_BANKCON_SDRAM); +} + +/** + * to_div - convert cycle time to divisor + * @cyc: The cycle time, in 10ths of nanoseconds. + * @hclk_tns: The cycle time for HCLK, in 10ths of nanoseconds. + * + * Convert the given cycle time into the divisor to use to obtain it from + * HCLK. +*/ +static inline unsigned int to_div(unsigned int cyc, unsigned int hclk_tns) +{ + if (cyc == 0) + return 0; + + return DIV_ROUND_UP(cyc, hclk_tns); +} + +/** + * calc_0124 - calculate divisor control for divisors that do /0, /1. /2 and /4 + * @cyc: The cycle time, in 10ths of nanoseconds. + * @hclk_tns: The cycle time for HCLK, in 10ths of nanoseconds. + * @v: Pointer to register to alter. + * @shift: The shift to get to the control bits. + * + * Calculate the divisor, and turn it into the correct control bits to + * set in the result, @v. + */ +static unsigned int calc_0124(unsigned int cyc, unsigned long hclk_tns, + unsigned long *v, int shift) +{ + unsigned int div = to_div(cyc, hclk_tns); + unsigned long val; + + s3c_freq_iodbg("%s: cyc=%d, hclk=%lu, shift=%d => div %d\n", + __func__, cyc, hclk_tns, shift, div); + + switch (div) { + case 0: + val = 0; + break; + case 1: + val = 1; + break; + case 2: + val = 2; + break; + case 3: + case 4: + val = 3; + break; + default: + return -1; + } + + *v |= val << shift; + return 0; +} + +int calc_tacp(unsigned int cyc, unsigned long hclk, unsigned long *v) +{ + /* Currently no support for Tacp calculations. */ + return 0; +} + +/** + * calc_tacc - calculate divisor control for tacc. + * @cyc: The cycle time, in 10ths of nanoseconds. + * @nwait_en: IS nWAIT enabled for this bank. + * @hclk_tns: The cycle time for HCLK, in 10ths of nanoseconds. + * @v: Pointer to register to alter. + * + * Calculate the divisor control for tACC, taking into account whether + * the bank has nWAIT enabled. The result is used to modify the value + * pointed to by @v. +*/ +static int calc_tacc(unsigned int cyc, int nwait_en, + unsigned long hclk_tns, unsigned long *v) +{ + unsigned int div = to_div(cyc, hclk_tns); + unsigned long val; + + s3c_freq_iodbg("%s: cyc=%u, nwait=%d, hclk=%lu => div=%u\n", + __func__, cyc, nwait_en, hclk_tns, div); + + /* if nWait enabled on an bank, Tacc must be at-least 4 cycles. */ + if (nwait_en && div < 4) + div = 4; + + switch (div) { + case 0: + val = 0; + break; + + case 1: + case 2: + case 3: + case 4: + val = div - 1; + break; + + case 5: + case 6: + val = 4; + break; + + case 7: + case 8: + val = 5; + break; + + case 9: + case 10: + val = 6; + break; + + case 11: + case 12: + case 13: + case 14: + val = 7; + break; + + default: + return -1; + } + + *v |= val << 8; + return 0; +} + +/** + * s3c2410_calc_bank - calculate bank timing infromation + * @cfg: The configuration we need to calculate for. + * @bt: The bank timing information. + * + * Given the cycle timine for a bank @bt, calculate the new BANKCON + * setting for the @cfg timing. This updates the timing information + * ready for the cpu frequency change. + */ +static int s3c2410_calc_bank(struct s3c_cpufreq_config *cfg, + struct s3c2410_iobank_timing *bt) +{ + unsigned long hclk = cfg->freq.hclk_tns; + unsigned long res; + int ret; + + res = bt->bankcon; + res &= (S3C2410_BANKCON_SDRAM | S3C2410_BANKCON_PMC16); + + /* tacp: 2,3,4,5 */ + /* tcah: 0,1,2,4 */ + /* tcoh: 0,1,2,4 */ + /* tacc: 1,2,3,4,6,7,10,14 (>4 for nwait) */ + /* tcos: 0,1,2,4 */ + /* tacs: 0,1,2,4 */ + + ret = calc_0124(bt->tacs, hclk, &res, S3C2410_BANKCON_Tacs_SHIFT); + ret |= calc_0124(bt->tcos, hclk, &res, S3C2410_BANKCON_Tcos_SHIFT); + ret |= calc_0124(bt->tcah, hclk, &res, S3C2410_BANKCON_Tcah_SHIFT); + ret |= calc_0124(bt->tcoh, hclk, &res, S3C2410_BANKCON_Tcoh_SHIFT); + + if (ret) + return -EINVAL; + + ret |= calc_tacp(bt->tacp, hclk, &res); + ret |= calc_tacc(bt->tacc, bt->nwait_en, hclk, &res); + + if (ret) + return -EINVAL; + + bt->bankcon = res; + return 0; +} + +static unsigned int tacc_tab[] = { + [0] = 1, + [1] = 2, + [2] = 3, + [3] = 4, + [4] = 6, + [5] = 9, + [6] = 10, + [7] = 14, +}; + +/** + * get_tacc - turn tACC value into cycle time + * @hclk_tns: The cycle time for HCLK, in 10ths of nanoseconds. + * @val: The bank timing register value, shifed down. + */ +static unsigned int get_tacc(unsigned long hclk_tns, + unsigned long val) +{ + val &= 7; + return hclk_tns * tacc_tab[val]; +} + +/** + * get_0124 - turn 0/1/2/4 divider into cycle time + * @hclk_tns: The cycle time for HCLK, in 10ths of nanoseconds. + * @val: The bank timing register value, shifed down. + */ +static unsigned int get_0124(unsigned long hclk_tns, + unsigned long val) +{ + val &= 3; + return hclk_tns * ((val == 3) ? 4 : val); +} + +/** + * s3c2410_iotiming_getbank - turn BANKCON into cycle time information + * @cfg: The frequency configuration + * @bt: The bank timing to fill in (uses cached BANKCON) + * + * Given the BANKCON setting in @bt and the current frequency settings + * in @cfg, update the cycle timing information. + */ +void s3c2410_iotiming_getbank(struct s3c_cpufreq_config *cfg, + struct s3c2410_iobank_timing *bt) +{ + unsigned long bankcon = bt->bankcon; + unsigned long hclk = cfg->freq.hclk_tns; + + bt->tcah = get_0124(hclk, bankcon >> S3C2410_BANKCON_Tcah_SHIFT); + bt->tcoh = get_0124(hclk, bankcon >> S3C2410_BANKCON_Tcoh_SHIFT); + bt->tcos = get_0124(hclk, bankcon >> S3C2410_BANKCON_Tcos_SHIFT); + bt->tacs = get_0124(hclk, bankcon >> S3C2410_BANKCON_Tacs_SHIFT); + bt->tacc = get_tacc(hclk, bankcon >> S3C2410_BANKCON_Tacc_SHIFT); +} + +/** + * s3c2410_iotiming_calc - Calculate bank timing for frequency change. + * @cfg: The frequency configuration + * @iot: The IO timing information to fill out. + * + * Calculate the new values for the banks in @iot based on the new + * frequency information in @cfg. This is then used by s3c2410_iotiming_set() + * to update the timing when necessary. + */ +int s3c2410_iotiming_calc(struct s3c_cpufreq_config *cfg, + struct s3c_iotimings *iot) +{ + struct s3c2410_iobank_timing *bt; + unsigned long bankcon; + int bank; + int ret; + + for (bank = 0; bank < MAX_BANKS; bank++) { + bankcon = __raw_readl(bank_reg(bank)); + bt = iot->bank[bank].io_2410; + + if (!bt) + continue; + + bt->bankcon = bankcon; + + ret = s3c2410_calc_bank(cfg, bt); + if (ret) { + printk(KERN_ERR "%s: cannot calculate bank %d io\n", + __func__, bank); + goto err; + } + + s3c_freq_iodbg("%s: bank %d: con=%08lx\n", + __func__, bank, bt->bankcon); + } + + return 0; + err: + return ret; +} + +/** + * s3c2410_iotiming_set - set the IO timings from the given setup. + * @cfg: The frequency configuration + * @iot: The IO timing information to use. + * + * Set all the currently used IO bank timing information generated + * by s3c2410_iotiming_calc() once the core has validated that all + * the new values are within permitted bounds. + */ +void s3c2410_iotiming_set(struct s3c_cpufreq_config *cfg, + struct s3c_iotimings *iot) +{ + struct s3c2410_iobank_timing *bt; + int bank; + + /* set the io timings from the specifier */ + + for (bank = 0; bank < MAX_BANKS; bank++) { + bt = iot->bank[bank].io_2410; + if (!bt) + continue; + + __raw_writel(bt->bankcon, bank_reg(bank)); + } +} + +/** + * s3c2410_iotiming_get - Get the timing information from current registers. + * @cfg: The frequency configuration + * @timings: The IO timing information to fill out. + * + * Calculate the @timings timing information from the current frequency + * information in @cfg, and the new frequency configur + * through all the IO banks, reading the state and then updating @iot + * as necessary. + * + * This is used at the moment on initialisation to get the current + * configuration so that boards do not have to carry their own setup + * if the timings are correct on initialisation. + */ + +int s3c2410_iotiming_get(struct s3c_cpufreq_config *cfg, + struct s3c_iotimings *timings) +{ + struct s3c2410_iobank_timing *bt; + unsigned long bankcon; + unsigned long bwscon; + int bank; + + bwscon = __raw_readl(S3C2410_BWSCON); + + /* look through all banks to see what is currently set. */ + + for (bank = 0; bank < MAX_BANKS; bank++) { + bankcon = __raw_readl(bank_reg(bank)); + + if (!bank_is_io(bankcon)) + continue; + + s3c_freq_iodbg("%s: bank %d: con %08lx\n", + __func__, bank, bankcon); + + bt = kzalloc(sizeof(struct s3c2410_iobank_timing), GFP_KERNEL); + if (!bt) { + printk(KERN_ERR "%s: no memory for bank\n", __func__); + return -ENOMEM; + } + + /* find out in nWait is enabled for bank. */ + + if (bank != 0) { + unsigned long tmp = S3C2410_BWSCON_GET(bwscon, bank); + if (tmp & S3C2410_BWSCON_WS) + bt->nwait_en = 1; + } + + timings->bank[bank].io_2410 = bt; + bt->bankcon = bankcon; + + s3c2410_iotiming_getbank(cfg, bt); + } + + s3c2410_print_timing("get", timings); + return 0; +} -- cgit v1.2.3 From a24c091db988551e2c350cfde9eb80ab6e791ffb Mon Sep 17 00:00:00 2001 From: Ben Dooks Date: Thu, 30 Jul 2009 23:23:27 +0100 Subject: ARM: S3C2410: CPUFREQ: Add core support. Add core support for frequency scaling on the S3C2410 SoC. Signed-off-by: Ben Dooks Signed-off-by: Ben Dooks --- arch/arm/mach-s3c2410/Kconfig | 11 ++ arch/arm/mach-s3c2410/Makefile | 1 + arch/arm/mach-s3c2410/cpu-freq.c | 157 ++++++++++++++++++++++++++ arch/arm/plat-s3c24xx/Kconfig | 7 ++ arch/arm/plat-s3c24xx/Makefile | 1 + arch/arm/plat-s3c24xx/s3c2410-cpufreq-utils.c | 64 +++++++++++ 6 files changed, 241 insertions(+) create mode 100644 arch/arm/mach-s3c2410/cpu-freq.c create mode 100644 arch/arm/plat-s3c24xx/s3c2410-cpufreq-utils.c diff --git a/arch/arm/mach-s3c2410/Kconfig b/arch/arm/mach-s3c2410/Kconfig index 41bb65d5b91..a7f70e18ccb 100644 --- a/arch/arm/mach-s3c2410/Kconfig +++ b/arch/arm/mach-s3c2410/Kconfig @@ -12,6 +12,7 @@ config CPU_S3C2410 select S3C2410_GPIO select CPU_LLSERIAL_S3C2410 select S3C2410_PM if PM + select S3C2410_CPUFREQ if CPU_FREQ_S3C24XX help Support for S3C2410 and S3C2410A family from the S3C24XX line of Samsung Mobile CPUs. @@ -45,6 +46,15 @@ config MACH_BAST_IDE Internal node for machines with an BAST style IDE interface +# cpu frequency scaling support + +config S3C2410_CPUFREQ + bool + depends on CPU_FREQ_S3C24XX && CPU_S3C2410 + select S3C2410_CPUFREQ_UTILS + help + CPU Frequency scaling support for S3C2410 + menu "S3C2410 Machines" config ARCH_SMDK2410 @@ -79,6 +89,7 @@ config MACH_N30 config ARCH_BAST bool "Simtec Electronics BAST (EB2410ITX)" select CPU_S3C2410 + select S3C2410_IOTIMING if S3C2410_CPUFREQ select PM_SIMTEC if PM select SIMTEC_NOR select MACH_BAST_IDE diff --git a/arch/arm/mach-s3c2410/Makefile b/arch/arm/mach-s3c2410/Makefile index fca02f82711..cc25eb0eb2c 100644 --- a/arch/arm/mach-s3c2410/Makefile +++ b/arch/arm/mach-s3c2410/Makefile @@ -15,6 +15,7 @@ obj-$(CONFIG_CPU_S3C2410_DMA) += dma.o obj-$(CONFIG_CPU_S3C2410_DMA) += dma.o obj-$(CONFIG_S3C2410_PM) += pm.o sleep.o obj-$(CONFIG_S3C2410_GPIO) += gpio.o +obj-$(CONFIG_S3C2410_CPUFREQ) += cpu-freq.o # Machine support diff --git a/arch/arm/mach-s3c2410/cpu-freq.c b/arch/arm/mach-s3c2410/cpu-freq.c new file mode 100644 index 00000000000..f2cbdbab0df --- /dev/null +++ b/arch/arm/mach-s3c2410/cpu-freq.c @@ -0,0 +1,157 @@ +/* linux/arch/arm/mach-s3c2410/cpu-freq.c + * + * Copyright (c) 2006,2008 Simtec Electronics + * http://armlinux.simtec.co.uk/ + * Ben Dooks + * + * S3C2410 CPU Frequency scaling + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include + +#include + +#include +#include +#include + +/* Note, 2410A has an extra mode for 1:4:4 ratio, bit 2 of CLKDIV */ + +static void s3c2410_cpufreq_setdivs(struct s3c_cpufreq_config *cfg) +{ + u32 clkdiv = 0; + + if (cfg->divs.h_divisor == 2) + clkdiv |= S3C2410_CLKDIVN_HDIVN; + + if (cfg->divs.p_divisor != cfg->divs.h_divisor) + clkdiv |= S3C2410_CLKDIVN_PDIVN; + + __raw_writel(clkdiv, S3C2410_CLKDIVN); +} + +static int s3c2410_cpufreq_calcdivs(struct s3c_cpufreq_config *cfg) +{ + unsigned long hclk, fclk, pclk; + unsigned int hdiv, pdiv; + unsigned long hclk_max; + + fclk = cfg->freq.fclk; + hclk_max = cfg->max.hclk; + + cfg->freq.armclk = fclk; + + s3c_freq_dbg("%s: fclk is %lu, max hclk %lu\n", + __func__, fclk, hclk_max); + + hdiv = (fclk > cfg->max.hclk) ? 2 : 1; + hclk = fclk / hdiv; + + if (hclk > cfg->max.hclk) { + s3c_freq_dbg("%s: hclk too big\n", __func__); + return -EINVAL; + } + + pdiv = (hclk > cfg->max.pclk) ? 2 : 1; + pclk = hclk / pdiv; + + if (pclk > cfg->max.pclk) { + s3c_freq_dbg("%s: pclk too big\n", __func__); + return -EINVAL; + } + + pdiv *= hdiv; + + /* record the result */ + cfg->divs.p_divisor = pdiv; + cfg->divs.h_divisor = hdiv; + + return 0 ; +} + +static struct s3c_cpufreq_info s3c2410_cpufreq_info = { + .max = { + .fclk = 200000000, + .hclk = 100000000, + .pclk = 50000000, + }, + + /* transition latency is about 5ms worst-case, so + * set 10ms to be sure */ + .latency = 10000000, + + .locktime_m = 150, + .locktime_u = 150, + .locktime_bits = 12, + + .need_pll = 1, + + .name = "s3c2410", + .calc_iotiming = s3c2410_iotiming_calc, + .set_iotiming = s3c2410_iotiming_set, + .get_iotiming = s3c2410_iotiming_get, + .resume_clocks = s3c2410_setup_clocks, + + .set_fvco = s3c2410_set_fvco, + .set_refresh = s3c2410_cpufreq_setrefresh, + .set_divs = s3c2410_cpufreq_setdivs, + .calc_divs = s3c2410_cpufreq_calcdivs, +}; + +static int s3c2410_cpufreq_add(struct sys_device *sysdev) +{ + return s3c_cpufreq_register(&s3c2410_cpufreq_info); +} + +static struct sysdev_driver s3c2410_cpufreq_driver = { + .add = s3c2410_cpufreq_add, +}; + +static int __init s3c2410_cpufreq_init(void) +{ + return sysdev_driver_register(&s3c2410_sysclass, + &s3c2410_cpufreq_driver); +} + +arch_initcall(s3c2410_cpufreq_init); + +static int s3c2410a_cpufreq_add(struct sys_device *sysdev) +{ + /* alter the maximum freq settings for S3C2410A. If a board knows + * it only has a maximum of 200, then it should register its own + * limits. */ + + s3c2410_cpufreq_info.max.fclk = 266000000; + s3c2410_cpufreq_info.max.hclk = 133000000; + s3c2410_cpufreq_info.max.pclk = 66500000; + s3c2410_cpufreq_info.name = "s3c2410a"; + + return s3c2410_cpufreq_add(sysdev); +} + +static struct sysdev_driver s3c2410a_cpufreq_driver = { + .add = s3c2410a_cpufreq_add, +}; + +static int __init s3c2410a_cpufreq_init(void) +{ + return sysdev_driver_register(&s3c2410a_sysclass, + &s3c2410a_cpufreq_driver); +} + +arch_initcall(s3c2410a_cpufreq_init); diff --git a/arch/arm/plat-s3c24xx/Kconfig b/arch/arm/plat-s3c24xx/Kconfig index d82d30c2f05..a547c79ed6c 100644 --- a/arch/arm/plat-s3c24xx/Kconfig +++ b/arch/arm/plat-s3c24xx/Kconfig @@ -116,6 +116,13 @@ config S3C2410_IOTIMING Internal node to select io timing code that is common to the s3c2410 and s3c2440/s3c2442 cpu frequency support. +config S3C2410_CPUFREQ_UTILS + bool + depends on CPU_FREQ_S3C24XX + help + Internal node to select timing code that is common to the s3c2410 + and s3c2440/s3c244 cpu frequency support. + config MACH_SMDK bool help diff --git a/arch/arm/plat-s3c24xx/Makefile b/arch/arm/plat-s3c24xx/Makefile index 6f9afd13ab4..b28fe9cb0e5 100644 --- a/arch/arm/plat-s3c24xx/Makefile +++ b/arch/arm/plat-s3c24xx/Makefile @@ -36,6 +36,7 @@ obj-$(CONFIG_S3C2410_CLOCK) += s3c2410-clock.o obj-$(CONFIG_S3C2410_DMA) += dma.o obj-$(CONFIG_S3C24XX_ADC) += adc.o obj-$(CONFIG_S3C2410_IOTIMING) += s3c2410-iotiming.o +obj-$(CONFIG_S3C2410_CPUFREQ_UTILS) += s3c2410-cpufreq-utils.o # device specific setup and/or initialisation obj-$(CONFIG_ARCH_S3C2410) += setup-i2c.o diff --git a/arch/arm/plat-s3c24xx/s3c2410-cpufreq-utils.c b/arch/arm/plat-s3c24xx/s3c2410-cpufreq-utils.c new file mode 100644 index 00000000000..43ea80190d8 --- /dev/null +++ b/arch/arm/plat-s3c24xx/s3c2410-cpufreq-utils.c @@ -0,0 +1,64 @@ +/* linux/arch/arm/plat-s3c24xx/s3c2410-cpufreq-utils.c + * + * Copyright (c) 2009 Simtec Electronics + * http://armlinux.simtec.co.uk/ + * Ben Dooks + * + * S3C24XX CPU Frequency scaling - utils for S3C2410/S3C2440/S3C2442 + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#include +#include +#include +#include + +#include +#include +#include + +#include + +/** + * s3c2410_cpufreq_setrefresh - set SDRAM refresh value + * @cfg: The frequency configuration + * + * Set the SDRAM refresh value appropriately for the configured + * frequency. + */ +void s3c2410_cpufreq_setrefresh(struct s3c_cpufreq_config *cfg) +{ + struct s3c_cpufreq_board *board = cfg->board; + unsigned long refresh; + unsigned long refval; + + /* Reduce both the refresh time (in ns) and the frequency (in MHz) + * down to ensure that we do not overflow 32 bit numbers. + * + * This should work for HCLK up to 133MHz and refresh period up + * to 30usec. + */ + + refresh = (cfg->freq.hclk / 100) * (board->refresh / 10); + refresh = DIV_ROUND_UP(refresh, (1000 * 1000)); /* apply scale */ + refresh = (1 << 11) + 1 - refresh; + + s3c_freq_dbg("%s: refresh value %lu\n", __func__, refresh); + + refval = __raw_readl(S3C2410_REFRESH); + refval &= ~((1 << 12) - 1); + refval |= refresh; + __raw_writel(refval, S3C2410_REFRESH); +} + +/** + * s3c2410_set_fvco - set the PLL value + * @cfg: The frequency configuration + */ +void s3c2410_set_fvco(struct s3c_cpufreq_config *cfg) +{ + __raw_writel(cfg->pll.index, S3C2410_MPLLCON); +} -- cgit v1.2.3 From 438a09e1eb01c3f0d4cddde97ed9caae652f910b Mon Sep 17 00:00:00 2001 From: Ben Dooks Date: Thu, 30 Jul 2009 23:23:28 +0100 Subject: ARM: S3C2410: CPUFREQ: Add PLL table Add PLL table for the S3C2410 SoC. Signed-off-by: Ben Dooks Signed-off-by: Ben Dooks --- arch/arm/mach-s3c2410/Kconfig | 7 ++++ arch/arm/mach-s3c2410/Makefile | 1 + arch/arm/mach-s3c2410/pll.c | 95 ++++++++++++++++++++++++++++++++++++++++++ 3 files changed, 103 insertions(+) create mode 100644 arch/arm/mach-s3c2410/pll.c diff --git a/arch/arm/mach-s3c2410/Kconfig b/arch/arm/mach-s3c2410/Kconfig index a7f70e18ccb..d8c023d4df3 100644 --- a/arch/arm/mach-s3c2410/Kconfig +++ b/arch/arm/mach-s3c2410/Kconfig @@ -55,6 +55,13 @@ config S3C2410_CPUFREQ help CPU Frequency scaling support for S3C2410 +config S3C2410_PLLTABLE + bool + depends on S3C2410_CPUFREQ && CPU_FREQ_S3C24XX_PLL + default y + help + Select the PLL table for the S3C2410 + menu "S3C2410 Machines" config ARCH_SMDK2410 diff --git a/arch/arm/mach-s3c2410/Makefile b/arch/arm/mach-s3c2410/Makefile index cc25eb0eb2c..2ab5ba4b266 100644 --- a/arch/arm/mach-s3c2410/Makefile +++ b/arch/arm/mach-s3c2410/Makefile @@ -16,6 +16,7 @@ obj-$(CONFIG_CPU_S3C2410_DMA) += dma.o obj-$(CONFIG_S3C2410_PM) += pm.o sleep.o obj-$(CONFIG_S3C2410_GPIO) += gpio.o obj-$(CONFIG_S3C2410_CPUFREQ) += cpu-freq.o +obj-$(CONFIG_S3C2410_PLLTABLE) += pll.o # Machine support diff --git a/arch/arm/mach-s3c2410/pll.c b/arch/arm/mach-s3c2410/pll.c new file mode 100644 index 00000000000..f178c2fd9d8 --- /dev/null +++ b/arch/arm/mach-s3c2410/pll.c @@ -0,0 +1,95 @@ +/* arch/arm/mach-s3c2410/pll.c + * + * Copyright (c) 2006,2007 Simtec Electronics + * http://armlinux.simtec.co.uk/ + * Ben Dooks + * Vincent Sanders + * + * S3C2410 CPU PLL tables + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA +*/ + +#include +#include +#include +#include +#include +#include +#include + +#include +#include + +static struct cpufreq_frequency_table pll_vals_12MHz[] = { + { .frequency = 34000000, .index = PLLVAL(82, 2, 3), }, + { .frequency = 45000000, .index = PLLVAL(82, 1, 3), }, + { .frequency = 51000000, .index = PLLVAL(161, 3, 3), }, + { .frequency = 48000000, .index = PLLVAL(120, 2, 3), }, + { .frequency = 56000000, .index = PLLVAL(142, 2, 3), }, + { .frequency = 68000000, .index = PLLVAL(82, 2, 2), }, + { .frequency = 79000000, .index = PLLVAL(71, 1, 2), }, + { .frequency = 85000000, .index = PLLVAL(105, 2, 2), }, + { .frequency = 90000000, .index = PLLVAL(112, 2, 2), }, + { .frequency = 101000000, .index = PLLVAL(127, 2, 2), }, + { .frequency = 113000000, .index = PLLVAL(105, 1, 2), }, + { .frequency = 118000000, .index = PLLVAL(150, 2, 2), }, + { .frequency = 124000000, .index = PLLVAL(116, 1, 2), }, + { .frequency = 135000000, .index = PLLVAL(82, 2, 1), }, + { .frequency = 147000000, .index = PLLVAL(90, 2, 1), }, + { .frequency = 152000000, .index = PLLVAL(68, 1, 1), }, + { .frequency = 158000000, .index = PLLVAL(71, 1, 1), }, + { .frequency = 170000000, .index = PLLVAL(77, 1, 1), }, + { .frequency = 180000000, .index = PLLVAL(82, 1, 1), }, + { .frequency = 186000000, .index = PLLVAL(85, 1, 1), }, + { .frequency = 192000000, .index = PLLVAL(88, 1, 1), }, + { .frequency = 203000000, .index = PLLVAL(161, 3, 1), }, + + /* 2410A extras */ + + { .frequency = 210000000, .index = PLLVAL(132, 2, 1), }, + { .frequency = 226000000, .index = PLLVAL(105, 1, 1), }, + { .frequency = 266000000, .index = PLLVAL(125, 1, 1), }, + { .frequency = 268000000, .index = PLLVAL(126, 1, 1), }, + { .frequency = 270000000, .index = PLLVAL(127, 1, 1), }, +}; + +static int s3c2410_plls_add(struct sys_device *dev) +{ + return s3c_plltab_register(pll_vals_12MHz, ARRAY_SIZE(pll_vals_12MHz)); +} + +static struct sysdev_driver s3c2410_plls_drv = { + .add = s3c2410_plls_add, +}; + +static int __init s3c2410_pll_init(void) +{ + return sysdev_driver_register(&s3c2410_sysclass, &s3c2410_plls_drv); + +} + +arch_initcall(s3c2410_pll_init); + +static struct sysdev_driver s3c2410a_plls_drv = { + .add = s3c2410_plls_add, +}; + +static int __init s3c2410a_pll_init(void) +{ + return sysdev_driver_register(&s3c2410a_sysclass, &s3c2410a_plls_drv); +} + +arch_initcall(s3c2410a_pll_init); -- cgit v1.2.3 From 342e20f10294aca4097ae2a056c72a202221a75f Mon Sep 17 00:00:00 2001 From: Ben Dooks Date: Thu, 30 Jul 2009 23:23:29 +0100 Subject: ARM: S3C2440: CPUFREQ: Add core support. Add core support for frequency scaling on the S3C2440 SoC. Signed-off-by: Ben Dooks Signed-off-by: Ben Dooks --- arch/arm/plat-s3c24xx/Kconfig | 8 + arch/arm/plat-s3c24xx/Makefile | 1 + arch/arm/plat-s3c24xx/s3c2440-cpufreq.c | 309 ++++++++++++++++++++++++++++++++ 3 files changed, 318 insertions(+) create mode 100644 arch/arm/plat-s3c24xx/s3c2440-cpufreq.c diff --git a/arch/arm/plat-s3c24xx/Kconfig b/arch/arm/plat-s3c24xx/Kconfig index a547c79ed6c..feb9db8886b 100644 --- a/arch/arm/plat-s3c24xx/Kconfig +++ b/arch/arm/plat-s3c24xx/Kconfig @@ -34,6 +34,14 @@ config CPU_S3C244X help Support for S3C2440 and S3C2442 Samsung Mobile CPU based systems. +config S3C2440_CPUFREQ + bool "S3C2440/S3C2442 CPU Frequency scaling support" + depends on CPU_FREQ_S3C24XX && (CPU_S3C2440 || CPU_S3C2442) + select S3C2410_CPUFREQ_UTILS + default y + help + CPU Frequency scaling support for S3C2440 and S3C2442 SoC CPUs. + config S3C24XX_PWM bool "PWM device support" select HAVE_PWM diff --git a/arch/arm/plat-s3c24xx/Makefile b/arch/arm/plat-s3c24xx/Makefile index b28fe9cb0e5..b73f2e17b16 100644 --- a/arch/arm/plat-s3c24xx/Makefile +++ b/arch/arm/plat-s3c24xx/Makefile @@ -27,6 +27,7 @@ obj-$(CONFIG_CPU_FREQ_S3C24XX) += cpu-freq.o obj-$(CONFIG_CPU_S3C244X) += s3c244x.o obj-$(CONFIG_CPU_S3C244X) += s3c244x-irq.o obj-$(CONFIG_CPU_S3C244X) += s3c244x-clock.o +obj-$(CONFIG_S3C2440_CPUFREQ) += s3c2440-cpufreq.o obj-$(CONFIG_PM_SIMTEC) += pm-simtec.o obj-$(CONFIG_PM) += pm.o obj-$(CONFIG_PM) += irq-pm.o diff --git a/arch/arm/plat-s3c24xx/s3c2440-cpufreq.c b/arch/arm/plat-s3c24xx/s3c2440-cpufreq.c new file mode 100644 index 00000000000..c177a20319e --- /dev/null +++ b/arch/arm/plat-s3c24xx/s3c2440-cpufreq.c @@ -0,0 +1,309 @@ +/* linux/arch/arm/plat-s3c24xx/s3c2440-cpufreq.c + * + * Copyright (c) 2006,2008,2009 Simtec Electronics + * http://armlinux.simtec.co.uk/ + * Ben Dooks + * Vincent Sanders + * + * S3C2440/S3C2442 CPU Frequency scaling + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include + +#include +#include + +#include + +#include +#include +#include + +static struct clk *xtal; +static struct clk *fclk; +static struct clk *hclk; +static struct clk *armclk; + +/* HDIV: 1, 2, 3, 4, 6, 8 */ + +static inline int within_khz(unsigned long a, unsigned long b) +{ + long diff = a - b; + + return (diff >= -1000 && diff <= 1000); +} + +/** + * s3c2440_cpufreq_calcdivs - calculate divider settings + * @cfg: The cpu frequency settings. + * + * Calcualte the divider values for the given frequency settings + * specified in @cfg. The values are stored in @cfg for later use + * by the relevant set routine if the request settings can be reached. + */ +int s3c2440_cpufreq_calcdivs(struct s3c_cpufreq_config *cfg) +{ + unsigned int hdiv, pdiv; + unsigned long hclk, fclk, armclk; + unsigned long hclk_max; + + fclk = cfg->freq.fclk; + armclk = cfg->freq.armclk; + hclk_max = cfg->max.hclk; + + s3c_freq_dbg("%s: fclk is %lu, armclk %lu, max hclk %lu\n", + __func__, fclk, armclk, hclk_max); + + if (armclk > fclk) { + printk(KERN_WARNING "%s: armclk > fclk\n", __func__); + armclk = fclk; + } + + /* if we are in DVS, we need HCLK to be <= ARMCLK */ + if (armclk < fclk && armclk < hclk_max) + hclk_max = armclk; + + for (hdiv = 1; hdiv < 9; hdiv++) { + if (hdiv == 5 || hdiv == 7) + hdiv++; + + hclk = (fclk / hdiv); + if (hclk <= hclk_max || within_khz(hclk, hclk_max)) + break; + } + + s3c_freq_dbg("%s: hclk %lu, div %d\n", __func__, hclk, hdiv); + + if (hdiv > 8) + goto invalid; + + pdiv = (hclk > cfg->max.pclk) ? 2 : 1; + + if ((hclk / pdiv) > cfg->max.pclk) + pdiv++; + + s3c_freq_dbg("%s: pdiv %d\n", __func__, pdiv); + + if (pdiv > 2) + goto invalid; + + pdiv *= hdiv; + + /* calculate a valid armclk */ + + if (armclk < hclk) + armclk = hclk; + + /* if we're running armclk lower than fclk, this really means + * that the system should go into dvs mode, which means that + * armclk is connected to hclk. */ + if (armclk < fclk) { + cfg->divs.dvs = 1; + armclk = hclk; + } else + cfg->divs.dvs = 0; + + cfg->freq.armclk = armclk; + + /* store the result, and then return */ + + cfg->divs.h_divisor = hdiv; + cfg->divs.p_divisor = pdiv; + + return 0; + + invalid: + return -EINVAL; +} + +#define CAMDIVN_HCLK_HALF (S3C2440_CAMDIVN_HCLK3_HALF | \ + S3C2440_CAMDIVN_HCLK4_HALF) + +/** + * s3c2440_cpufreq_setdivs - set the cpu frequency divider settings + * @cfg: The cpu frequency settings. + * + * Set the divisors from the settings in @cfg, which where generated + * during the calculation phase by s3c2440_cpufreq_calcdivs(). + */ +static void s3c2440_cpufreq_setdivs(struct s3c_cpufreq_config *cfg) +{ + unsigned long clkdiv, camdiv; + + s3c_freq_dbg("%s: divsiors: h=%d, p=%d\n", __func__, + cfg->divs.h_divisor, cfg->divs.p_divisor); + + clkdiv = __raw_readl(S3C2410_CLKDIVN); + camdiv = __raw_readl(S3C2440_CAMDIVN); + + clkdiv &= ~(S3C2440_CLKDIVN_HDIVN_MASK | S3C2440_CLKDIVN_PDIVN); + camdiv &= ~CAMDIVN_HCLK_HALF; + + switch (cfg->divs.h_divisor) { + case 1: + clkdiv |= S3C2440_CLKDIVN_HDIVN_1; + break; + + case 2: + clkdiv |= S3C2440_CLKDIVN_HDIVN_2; + break; + + case 6: + camdiv |= S3C2440_CAMDIVN_HCLK3_HALF; + case 3: + clkdiv |= S3C2440_CLKDIVN_HDIVN_3_6; + break; + + case 8: + camdiv |= S3C2440_CAMDIVN_HCLK4_HALF; + case 4: + clkdiv |= S3C2440_CLKDIVN_HDIVN_4_8; + break; + + default: + BUG(); /* we don't expect to get here. */ + } + + if (cfg->divs.p_divisor != cfg->divs.h_divisor) + clkdiv |= S3C2440_CLKDIVN_PDIVN; + + /* todo - set pclk. */ + + /* Write the divisors first with hclk intentionally halved so that + * when we write clkdiv we will under-frequency instead of over. We + * then make a short delay and remove the hclk halving if necessary. + */ + + __raw_writel(camdiv | CAMDIVN_HCLK_HALF, S3C2440_CAMDIVN); + __raw_writel(clkdiv, S3C2410_CLKDIVN); + + ndelay(20); + __raw_writel(camdiv, S3C2440_CAMDIVN); + + clk_set_parent(armclk, cfg->divs.dvs ? hclk : fclk); +} + +static int run_freq_for(unsigned long max_hclk, unsigned long fclk, + int *divs, + struct cpufreq_frequency_table *table, + size_t table_size) +{ + unsigned long freq; + int index = 0; + int div; + + for (div = *divs; div > 0; div = *divs++) { + freq = fclk / div; + + if (freq > max_hclk && div != 1) + continue; + + freq /= 1000; /* table is in kHz */ + index = s3c_cpufreq_addfreq(table, index, table_size, freq); + if (index < 0) + break; + } + + return index; +} + +static int hclk_divs[] = { 1, 2, 3, 4, 6, 8, -1 }; + +static int s3c2440_cpufreq_calctable(struct s3c_cpufreq_config *cfg, + struct cpufreq_frequency_table *table, + size_t table_size) +{ + int ret; + + WARN_ON(cfg->info == NULL); + WARN_ON(cfg->board == NULL); + + ret = run_freq_for(cfg->info->max.hclk, + cfg->info->max.fclk, + hclk_divs, + table, table_size); + + s3c_freq_dbg("%s: returning %d\n", __func__, ret); + + return ret; +} + +struct s3c_cpufreq_info s3c2440_cpufreq_info = { + .max = { + .fclk = 400000000, + .hclk = 133333333, + .pclk = 66666666, + }, + + .locktime_m = 300, + .locktime_u = 300, + .locktime_bits = 16, + + .name = "s3c244x", + .calc_iotiming = s3c2410_iotiming_calc, + .set_iotiming = s3c2410_iotiming_set, + .get_iotiming = s3c2410_iotiming_get, + .set_fvco = s3c2410_set_fvco, + + .set_refresh = s3c2410_cpufreq_setrefresh, + .set_divs = s3c2440_cpufreq_setdivs, + .calc_divs = s3c2440_cpufreq_calcdivs, + .calc_freqtable = s3c2440_cpufreq_calctable, + + .resume_clocks = s3c244x_setup_clocks, +}; + +static int s3c2440_cpufreq_add(struct sys_device *sysdev) +{ + xtal = s3c_cpufreq_clk_get(NULL, "xtal"); + hclk = s3c_cpufreq_clk_get(NULL, "hclk"); + fclk = s3c_cpufreq_clk_get(NULL, "fclk"); + armclk = s3c_cpufreq_clk_get(NULL, "armclk"); + + if (IS_ERR(xtal) || IS_ERR(hclk) || IS_ERR(fclk) || IS_ERR(armclk)) { + printk(KERN_ERR "%s: failed to get clocks\n", __func__); + return -ENOENT; + } + + return s3c_cpufreq_register(&s3c2440_cpufreq_info); +} + +static struct sysdev_driver s3c2440_cpufreq_driver = { + .add = s3c2440_cpufreq_add, +}; + +static int s3c2440_cpufreq_init(void) +{ + return sysdev_driver_register(&s3c2440_sysclass, + &s3c2440_cpufreq_driver); +} + +/* arch_initcall adds the clocks we need, so use subsys_initcall. */ +subsys_initcall(s3c2440_cpufreq_init); + +static struct sysdev_driver s3c2442_cpufreq_driver = { + .add = s3c2440_cpufreq_add, +}; + +static int s3c2442_cpufreq_init(void) +{ + return sysdev_driver_register(&s3c2442_sysclass, + &s3c2442_cpufreq_driver); +} + +subsys_initcall(s3c2442_cpufreq_init); -- cgit v1.2.3 From 78278d6a9673b487d8229dd430cacdf9964c0d3f Mon Sep 17 00:00:00 2001 From: Ben Dooks Date: Thu, 30 Jul 2009 23:23:30 +0100 Subject: ARM: S3C2440: CPUFREQ: Add PLL tables Add PLL tables for the S3C2440. Signed-off-by: Ben Dooks Signed-off-by: Ben Dooks --- arch/arm/plat-s3c24xx/Kconfig | 14 +++ arch/arm/plat-s3c24xx/Makefile | 3 + arch/arm/plat-s3c24xx/s3c2440-pll-12000000.c | 97 ++++++++++++++++++++ arch/arm/plat-s3c24xx/s3c2440-pll-16934400.c | 127 +++++++++++++++++++++++++++ 4 files changed, 241 insertions(+) create mode 100644 arch/arm/plat-s3c24xx/s3c2440-pll-12000000.c create mode 100644 arch/arm/plat-s3c24xx/s3c2440-pll-16934400.c diff --git a/arch/arm/plat-s3c24xx/Kconfig b/arch/arm/plat-s3c24xx/Kconfig index feb9db8886b..9c449c048c7 100644 --- a/arch/arm/plat-s3c24xx/Kconfig +++ b/arch/arm/plat-s3c24xx/Kconfig @@ -42,6 +42,20 @@ config S3C2440_CPUFREQ help CPU Frequency scaling support for S3C2440 and S3C2442 SoC CPUs. +config S3C2440_PLL_12000000 + bool + depends on S3C2440_CPUFREQ + default y if CPU_FREQ_S3C24XX_PLL + help + PLL tables for S3C2440 or S3C2442 CPUs with 12MHz crystals. + +config S3C2440_PLL_16934400 + bool + depends on S3C2440_CPUFREQ + default y if CPU_FREQ_S3C24XX_PLL + help + PLL tables for S3C2440 or S3C2442 CPUs with 16.934MHz crystals. + config S3C24XX_PWM bool "PWM device support" select HAVE_PWM diff --git a/arch/arm/plat-s3c24xx/Makefile b/arch/arm/plat-s3c24xx/Makefile index b73f2e17b16..c60317b3491 100644 --- a/arch/arm/plat-s3c24xx/Makefile +++ b/arch/arm/plat-s3c24xx/Makefile @@ -28,6 +28,9 @@ obj-$(CONFIG_CPU_S3C244X) += s3c244x.o obj-$(CONFIG_CPU_S3C244X) += s3c244x-irq.o obj-$(CONFIG_CPU_S3C244X) += s3c244x-clock.o obj-$(CONFIG_S3C2440_CPUFREQ) += s3c2440-cpufreq.o +obj-$(CONFIG_S3C2440_PLL_12000000) += s3c2440-pll-12000000.o +obj-$(CONFIG_S3C2440_PLL_16934400) += s3c2440-pll-16934400.o + obj-$(CONFIG_PM_SIMTEC) += pm-simtec.o obj-$(CONFIG_PM) += pm.o obj-$(CONFIG_PM) += irq-pm.o diff --git a/arch/arm/plat-s3c24xx/s3c2440-pll-12000000.c b/arch/arm/plat-s3c24xx/s3c2440-pll-12000000.c new file mode 100644 index 00000000000..ff9443b233a --- /dev/null +++ b/arch/arm/plat-s3c24xx/s3c2440-pll-12000000.c @@ -0,0 +1,97 @@ +/* arch/arm/plat-s3c24xx/s3c2440-pll-12000000.c + * + * Copyright (c) 2006,2007 Simtec Electronics + * http://armlinux.simtec.co.uk/ + * Ben Dooks + * Vincent Sanders + * + * S3C2440/S3C2442 CPU PLL tables (12MHz Crystal) + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#include +#include +#include +#include +#include + +#include +#include + +static struct cpufreq_frequency_table s3c2440_plls_12[] __initdata = { + { .frequency = 75000000, .index = PLLVAL(0x75, 3, 3), }, /* FVco 600.000000 */ + { .frequency = 80000000, .index = PLLVAL(0x98, 4, 3), }, /* FVco 640.000000 */ + { .frequency = 90000000, .index = PLLVAL(0x70, 2, 3), }, /* FVco 720.000000 */ + { .frequency = 100000000, .index = PLLVAL(0x5c, 1, 3), }, /* FVco 800.000000 */ + { .frequency = 110000000, .index = PLLVAL(0x66, 1, 3), }, /* FVco 880.000000 */ + { .frequency = 120000000, .index = PLLVAL(0x70, 1, 3), }, /* FVco 960.000000 */ + { .frequency = 150000000, .index = PLLVAL(0x75, 3, 2), }, /* FVco 600.000000 */ + { .frequency = 160000000, .index = PLLVAL(0x98, 4, 2), }, /* FVco 640.000000 */ + { .frequency = 170000000, .index = PLLVAL(0x4d, 1, 2), }, /* FVco 680.000000 */ + { .frequency = 180000000, .index = PLLVAL(0x70, 2, 2), }, /* FVco 720.000000 */ + { .frequency = 190000000, .index = PLLVAL(0x57, 1, 2), }, /* FVco 760.000000 */ + { .frequency = 200000000, .index = PLLVAL(0x5c, 1, 2), }, /* FVco 800.000000 */ + { .frequency = 210000000, .index = PLLVAL(0x84, 2, 2), }, /* FVco 840.000000 */ + { .frequency = 220000000, .index = PLLVAL(0x66, 1, 2), }, /* FVco 880.000000 */ + { .frequency = 230000000, .index = PLLVAL(0x6b, 1, 2), }, /* FVco 920.000000 */ + { .frequency = 240000000, .index = PLLVAL(0x70, 1, 2), }, /* FVco 960.000000 */ + { .frequency = 300000000, .index = PLLVAL(0x75, 3, 1), }, /* FVco 600.000000 */ + { .frequency = 310000000, .index = PLLVAL(0x93, 4, 1), }, /* FVco 620.000000 */ + { .frequency = 320000000, .index = PLLVAL(0x98, 4, 1), }, /* FVco 640.000000 */ + { .frequency = 330000000, .index = PLLVAL(0x66, 2, 1), }, /* FVco 660.000000 */ + { .frequency = 340000000, .index = PLLVAL(0x4d, 1, 1), }, /* FVco 680.000000 */ + { .frequency = 350000000, .index = PLLVAL(0xa7, 4, 1), }, /* FVco 700.000000 */ + { .frequency = 360000000, .index = PLLVAL(0x70, 2, 1), }, /* FVco 720.000000 */ + { .frequency = 370000000, .index = PLLVAL(0xb1, 4, 1), }, /* FVco 740.000000 */ + { .frequency = 380000000, .index = PLLVAL(0x57, 1, 1), }, /* FVco 760.000000 */ + { .frequency = 390000000, .index = PLLVAL(0x7a, 2, 1), }, /* FVco 780.000000 */ + { .frequency = 400000000, .index = PLLVAL(0x5c, 1, 1), }, /* FVco 800.000000 */ +}; + +static int s3c2440_plls12_add(struct sys_device *dev) +{ + struct clk *xtal_clk; + unsigned long xtal; + + xtal_clk = clk_get(NULL, "xtal"); + if (IS_ERR(xtal_clk)) + return PTR_ERR(xtal_clk); + + xtal = clk_get_rate(xtal_clk); + clk_put(xtal_clk); + + if (xtal == 12000000) { + printk(KERN_INFO "Using PLL table for 12MHz crystal\n"); + return s3c_plltab_register(s3c2440_plls_12, + ARRAY_SIZE(s3c2440_plls_12)); + } + + return 0; +} + +static struct sysdev_driver s3c2440_plls12_drv = { + .add = s3c2440_plls12_add, +}; + +static int __init s3c2440_pll_12mhz(void) +{ + return sysdev_driver_register(&s3c2440_sysclass, &s3c2440_plls12_drv); + +} + +arch_initcall(s3c2440_pll_12mhz); + +static struct sysdev_driver s3c2442_plls12_drv = { + .add = s3c2440_plls12_add, +}; + +static int __init s3c2442_pll_12mhz(void) +{ + return sysdev_driver_register(&s3c2442_sysclass, &s3c2442_plls12_drv); + +} + +arch_initcall(s3c2442_pll_12mhz); diff --git a/arch/arm/plat-s3c24xx/s3c2440-pll-16934400.c b/arch/arm/plat-s3c24xx/s3c2440-pll-16934400.c new file mode 100644 index 00000000000..7679af13a94 --- /dev/null +++ b/arch/arm/plat-s3c24xx/s3c2440-pll-16934400.c @@ -0,0 +1,127 @@ +/* arch/arm/plat-s3c24xx/s3c2440-pll-16934400.c + * + * Copyright (c) 2006-2008 Simtec Electronics + * http://armlinux.simtec.co.uk/ + * Ben Dooks + * Vincent Sanders + * + * S3C2440/S3C2442 CPU PLL tables (16.93444MHz Crystal) + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#include +#include +#include +#include +#include + +#include +#include + +static struct cpufreq_frequency_table s3c2440_plls_169344[] __initdata = { + { .frequency = 78019200, .index = PLLVAL(121, 5, 3), }, /* FVco 624.153600 */ + { .frequency = 84067200, .index = PLLVAL(131, 5, 3), }, /* FVco 672.537600 */ + { .frequency = 90115200, .index = PLLVAL(141, 5, 3), }, /* FVco 720.921600 */ + { .frequency = 96163200, .index = PLLVAL(151, 5, 3), }, /* FVco 769.305600 */ + { .frequency = 102135600, .index = PLLVAL(185, 6, 3), }, /* FVco 817.084800 */ + { .frequency = 108259200, .index = PLLVAL(171, 5, 3), }, /* FVco 866.073600 */ + { .frequency = 114307200, .index = PLLVAL(127, 3, 3), }, /* FVco 914.457600 */ + { .frequency = 120234240, .index = PLLVAL(134, 3, 3), }, /* FVco 961.873920 */ + { .frequency = 126161280, .index = PLLVAL(141, 3, 3), }, /* FVco 1009.290240 */ + { .frequency = 132088320, .index = PLLVAL(148, 3, 3), }, /* FVco 1056.706560 */ + { .frequency = 138015360, .index = PLLVAL(155, 3, 3), }, /* FVco 1104.122880 */ + { .frequency = 144789120, .index = PLLVAL(163, 3, 3), }, /* FVco 1158.312960 */ + { .frequency = 150100363, .index = PLLVAL(187, 9, 2), }, /* FVco 600.401454 */ + { .frequency = 156038400, .index = PLLVAL(121, 5, 2), }, /* FVco 624.153600 */ + { .frequency = 162086400, .index = PLLVAL(126, 5, 2), }, /* FVco 648.345600 */ + { .frequency = 168134400, .index = PLLVAL(131, 5, 2), }, /* FVco 672.537600 */ + { .frequency = 174048000, .index = PLLVAL(177, 7, 2), }, /* FVco 696.192000 */ + { .frequency = 180230400, .index = PLLVAL(141, 5, 2), }, /* FVco 720.921600 */ + { .frequency = 186278400, .index = PLLVAL(124, 4, 2), }, /* FVco 745.113600 */ + { .frequency = 192326400, .index = PLLVAL(151, 5, 2), }, /* FVco 769.305600 */ + { .frequency = 198132480, .index = PLLVAL(109, 3, 2), }, /* FVco 792.529920 */ + { .frequency = 204271200, .index = PLLVAL(185, 6, 2), }, /* FVco 817.084800 */ + { .frequency = 210268800, .index = PLLVAL(141, 4, 2), }, /* FVco 841.075200 */ + { .frequency = 216518400, .index = PLLVAL(171, 5, 2), }, /* FVco 866.073600 */ + { .frequency = 222264000, .index = PLLVAL(97, 2, 2), }, /* FVco 889.056000 */ + { .frequency = 228614400, .index = PLLVAL(127, 3, 2), }, /* FVco 914.457600 */ + { .frequency = 234259200, .index = PLLVAL(158, 4, 2), }, /* FVco 937.036800 */ + { .frequency = 240468480, .index = PLLVAL(134, 3, 2), }, /* FVco 961.873920 */ + { .frequency = 246960000, .index = PLLVAL(167, 4, 2), }, /* FVco 987.840000 */ + { .frequency = 252322560, .index = PLLVAL(141, 3, 2), }, /* FVco 1009.290240 */ + { .frequency = 258249600, .index = PLLVAL(114, 2, 2), }, /* FVco 1032.998400 */ + { .frequency = 264176640, .index = PLLVAL(148, 3, 2), }, /* FVco 1056.706560 */ + { .frequency = 270950400, .index = PLLVAL(120, 2, 2), }, /* FVco 1083.801600 */ + { .frequency = 276030720, .index = PLLVAL(155, 3, 2), }, /* FVco 1104.122880 */ + { .frequency = 282240000, .index = PLLVAL(92, 1, 2), }, /* FVco 1128.960000 */ + { .frequency = 289578240, .index = PLLVAL(163, 3, 2), }, /* FVco 1158.312960 */ + { .frequency = 294235200, .index = PLLVAL(131, 2, 2), }, /* FVco 1176.940800 */ + { .frequency = 300200727, .index = PLLVAL(187, 9, 1), }, /* FVco 600.401454 */ + { .frequency = 306358690, .index = PLLVAL(191, 9, 1), }, /* FVco 612.717380 */ + { .frequency = 312076800, .index = PLLVAL(121, 5, 1), }, /* FVco 624.153600 */ + { .frequency = 318366720, .index = PLLVAL(86, 3, 1), }, /* FVco 636.733440 */ + { .frequency = 324172800, .index = PLLVAL(126, 5, 1), }, /* FVco 648.345600 */ + { .frequency = 330220800, .index = PLLVAL(109, 4, 1), }, /* FVco 660.441600 */ + { .frequency = 336268800, .index = PLLVAL(131, 5, 1), }, /* FVco 672.537600 */ + { .frequency = 342074880, .index = PLLVAL(93, 3, 1), }, /* FVco 684.149760 */ + { .frequency = 348096000, .index = PLLVAL(177, 7, 1), }, /* FVco 696.192000 */ + { .frequency = 355622400, .index = PLLVAL(118, 4, 1), }, /* FVco 711.244800 */ + { .frequency = 360460800, .index = PLLVAL(141, 5, 1), }, /* FVco 720.921600 */ + { .frequency = 366206400, .index = PLLVAL(165, 6, 1), }, /* FVco 732.412800 */ + { .frequency = 372556800, .index = PLLVAL(124, 4, 1), }, /* FVco 745.113600 */ + { .frequency = 378201600, .index = PLLVAL(126, 4, 1), }, /* FVco 756.403200 */ + { .frequency = 384652800, .index = PLLVAL(151, 5, 1), }, /* FVco 769.305600 */ + { .frequency = 391608000, .index = PLLVAL(177, 6, 1), }, /* FVco 783.216000 */ + { .frequency = 396264960, .index = PLLVAL(109, 3, 1), }, /* FVco 792.529920 */ + { .frequency = 402192000, .index = PLLVAL(87, 2, 1), }, /* FVco 804.384000 */ +}; + +static int s3c2440_plls169344_add(struct sys_device *dev) +{ + struct clk *xtal_clk; + unsigned long xtal; + + xtal_clk = clk_get(NULL, "xtal"); + if (IS_ERR(xtal_clk)) + return PTR_ERR(xtal_clk); + + xtal = clk_get_rate(xtal_clk); + clk_put(xtal_clk); + + if (xtal == 169344000) { + printk(KERN_INFO "Using PLL table for 16.9344MHz crystal\n"); + return s3c_plltab_register(s3c2440_plls_169344, + ARRAY_SIZE(s3c2440_plls_169344)); + } + + return 0; +} + +static struct sysdev_driver s3c2440_plls169344_drv = { + .add = s3c2440_plls169344_add, +}; + +static int __init s3c2440_pll_16934400(void) +{ + return sysdev_driver_register(&s3c2440_sysclass, + &s3c2440_plls169344_drv); + +} + +arch_initcall(s3c2440_pll_16934400); + +static struct sysdev_driver s3c2442_plls169344_drv = { + .add = s3c2440_plls169344_add, +}; + +static int __init s3c2442_pll_16934400(void) +{ + return sysdev_driver_register(&s3c2442_sysclass, + &s3c2442_plls169344_drv); + +} + +arch_initcall(s3c2442_pll_16934400); -- cgit v1.2.3 From 0345b51c6a4bfaf6c066b8055d02116432b6a0c9 Mon Sep 17 00:00:00 2001 From: Ben Dooks Date: Thu, 30 Jul 2009 23:23:31 +0100 Subject: ARM: S3C2440: CPUFREQ: Add crystal frequency Kconfig entries. Add entries to select the crystal to select for each different supported board. This information is then available for anything else requiring this, such as the CPUFreq PLL tables. Signed-off-by: Ben Dooks Signed-off-by: Ben Dooks --- arch/arm/mach-s3c2440/Kconfig | 6 ++++++ arch/arm/plat-s3c24xx/Kconfig | 16 ++++++++++++++-- 2 files changed, 20 insertions(+), 2 deletions(-) diff --git a/arch/arm/mach-s3c2440/Kconfig b/arch/arm/mach-s3c2440/Kconfig index 8cfeaec3730..3cb12e39e0a 100644 --- a/arch/arm/mach-s3c2440/Kconfig +++ b/arch/arm/mach-s3c2440/Kconfig @@ -33,6 +33,7 @@ config MACH_ANUBIS select PM_SIMTEC if PM select HAVE_PATA_PLATFORM select S3C24XX_GPIO_EXTRA64 + select S3C2440_XTAL_12000000 select S3C_DEV_USB_HOST help Say Y here if you are using the Simtec Electronics ANUBIS @@ -44,6 +45,7 @@ config MACH_OSIRIS select S3C24XX_DCLK select PM_SIMTEC if PM select S3C24XX_GPIO_EXTRA128 + select S3C2440_XTAL_12000000 select S3C_DEV_USB_HOST help Say Y here if you are using the Simtec IM2440D20 module, also @@ -52,6 +54,7 @@ config MACH_OSIRIS config MACH_RX3715 bool "HP iPAQ rx3715" select CPU_S3C2440 + select S3C2440_XTAL_16934400 select PM_H1940 if PM help Say Y here if you are using the HP iPAQ rx3715. @@ -59,6 +62,7 @@ config MACH_RX3715 config ARCH_S3C2440 bool "SMDK2440" select CPU_S3C2440 + select S3C2440_XTAL_16934400 select MACH_SMDK select S3C_DEV_USB_HOST help @@ -67,6 +71,7 @@ config ARCH_S3C2440 config MACH_NEXCODER_2440 bool "NexVision NEXCODER 2440 Light Board" select CPU_S3C2440 + select S3C2440_XTAL_12000000 select S3C_DEV_USB_HOST help Say Y here if you are using the Nex Vision NEXCODER 2440 Light Board @@ -75,6 +80,7 @@ config SMDK2440_CPU2440 bool "SMDK2440 with S3C2440 CPU module" depends on ARCH_S3C2440 default y if ARCH_S3C2440 + select S3C2440_XTAL_16934400 select CPU_S3C2440 config MACH_AT2440EVB diff --git a/arch/arm/plat-s3c24xx/Kconfig b/arch/arm/plat-s3c24xx/Kconfig index 9c449c048c7..ec9921b6848 100644 --- a/arch/arm/plat-s3c24xx/Kconfig +++ b/arch/arm/plat-s3c24xx/Kconfig @@ -42,16 +42,28 @@ config S3C2440_CPUFREQ help CPU Frequency scaling support for S3C2440 and S3C2442 SoC CPUs. +config S3C2440_XTAL_12000000 + bool + help + Indicate that the build needs to support 12MHz system + crystal. + +config S3C2440_XTAL_16934400 + bool + help + Indicate that the build needs to support 16.9344MHz system + crystal. + config S3C2440_PLL_12000000 bool - depends on S3C2440_CPUFREQ + depends on S3C2440_CPUFREQ && S3C2440_XTAL_12000000 default y if CPU_FREQ_S3C24XX_PLL help PLL tables for S3C2440 or S3C2442 CPUs with 12MHz crystals. config S3C2440_PLL_16934400 bool - depends on S3C2440_CPUFREQ + depends on S3C2440_CPUFREQ && S3C2440_XTAL_16934400 default y if CPU_FREQ_S3C24XX_PLL help PLL tables for S3C2440 or S3C2442 CPUs with 16.934MHz crystals. -- cgit v1.2.3 From baf6b281cfa7259ab2d1148b879850f699520bc6 Mon Sep 17 00:00:00 2001 From: Ben Dooks Date: Thu, 30 Jul 2009 23:23:32 +0100 Subject: ARM: OSIRIS: CPUFREQ: Add CPU frequency scaling support Add CPU frequency scalling support to the Simtec Osiris. Signed-off-by: Ben Dooks Signed-off-by: Ben Dooks --- arch/arm/mach-s3c2440/Kconfig | 1 + arch/arm/mach-s3c2440/mach-osiris.c | 9 +++++++++ 2 files changed, 10 insertions(+) diff --git a/arch/arm/mach-s3c2440/Kconfig b/arch/arm/mach-s3c2440/Kconfig index 3cb12e39e0a..8ae1b288f7f 100644 --- a/arch/arm/mach-s3c2440/Kconfig +++ b/arch/arm/mach-s3c2440/Kconfig @@ -46,6 +46,7 @@ config MACH_OSIRIS select PM_SIMTEC if PM select S3C24XX_GPIO_EXTRA128 select S3C2440_XTAL_12000000 + select S3C2410_IOTIMING if S3C2440_CPUFREQ select S3C_DEV_USB_HOST help Say Y here if you are using the Simtec IM2440D20 module, also diff --git a/arch/arm/mach-s3c2440/mach-osiris.c b/arch/arm/mach-s3c2440/mach-osiris.c index cba064b49a6..2105a41281a 100644 --- a/arch/arm/mach-s3c2440/mach-osiris.c +++ b/arch/arm/mach-s3c2440/mach-osiris.c @@ -34,6 +34,7 @@ #include #include +#include #include #include #include @@ -351,6 +352,12 @@ static struct clk *osiris_clocks[] __initdata = { &s3c24xx_uclk, }; +static struct s3c_cpufreq_board __initdata osiris_cpufreq = { + .refresh = 7800, /* refresh period is 7.8usec */ + .auto_io = 1, + .need_io = 1, +}; + static void __init osiris_map_io(void) { unsigned long flags; @@ -402,6 +409,8 @@ static void __init osiris_init(void) s3c_i2c0_set_platdata(NULL); + s3c_cpufreq_setboard(&osiris_cpufreq); + i2c_register_board_info(0, osiris_i2c_devs, ARRAY_SIZE(osiris_i2c_devs)); -- cgit v1.2.3 From 22d4239973bbd3738b3cfe6048c55f885f3f6256 Mon Sep 17 00:00:00 2001 From: Ben Dooks Date: Thu, 30 Jul 2009 23:23:33 +0100 Subject: ARM: S3C2412: CPUFREQ: Add core support. Add core support for frequency scaling on the S3C2412 SoC. Signed-off-by: Ben Dooks Signed-off-by: Ben Dooks --- arch/arm/mach-s3c2412/Kconfig | 6 + arch/arm/mach-s3c2412/Makefile | 1 + arch/arm/mach-s3c2412/cpu-freq.c | 251 +++++++++++++++++++++++++++++++++++++++ 3 files changed, 258 insertions(+) create mode 100644 arch/arm/mach-s3c2412/cpu-freq.c diff --git a/arch/arm/mach-s3c2412/Kconfig b/arch/arm/mach-s3c2412/Kconfig index 63586ffd0ae..79e18340e07 100644 --- a/arch/arm/mach-s3c2412/Kconfig +++ b/arch/arm/mach-s3c2412/Kconfig @@ -32,6 +32,12 @@ config S3C2412_PM help Internal config node to apply S3C2412 power management +config S3C2412_CPUFREQ + bool + depends on CPU_FREQ_S3C24XX && CPU_S3C2412 + default y + help + CPU Frequency scaling support for S3C2412 and S3C2413 SoC CPUs. menu "S3C2412 Machines" diff --git a/arch/arm/mach-s3c2412/Makefile b/arch/arm/mach-s3c2412/Makefile index 20918d5dc6a..530ec46cbae 100644 --- a/arch/arm/mach-s3c2412/Makefile +++ b/arch/arm/mach-s3c2412/Makefile @@ -15,6 +15,7 @@ obj-$(CONFIG_CPU_S3C2412) += clock.o obj-$(CONFIG_CPU_S3C2412) += gpio.o obj-$(CONFIG_S3C2412_DMA) += dma.o obj-$(CONFIG_S3C2412_PM) += pm.o sleep.o +obj-$(CONFIG_S3C2412_CPUFREQ) += cpu-freq.o # Machine support diff --git a/arch/arm/mach-s3c2412/cpu-freq.c b/arch/arm/mach-s3c2412/cpu-freq.c new file mode 100644 index 00000000000..80b20c33447 --- /dev/null +++ b/arch/arm/mach-s3c2412/cpu-freq.c @@ -0,0 +1,251 @@ +/* linux/arch/arm/mach-s3c2412/cpu-freq.c + * + * Copyright 2008 Simtec Electronics + * http://armlinux.simtec.co.uk/ + * Ben Dooks + * + * S3C2412 CPU Frequency scalling + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include + +#include +#include + +#include +#include +#include + +/* our clock resources. */ +static struct clk *xtal; +static struct clk *fclk; +static struct clk *hclk; +static struct clk *armclk; + +/* HDIV: 1, 2, 3, 4, 6, 8 */ + +static int s3c2412_cpufreq_calcdivs(struct s3c_cpufreq_config *cfg) +{ + unsigned int hdiv, pdiv, armdiv, dvs; + unsigned long hclk, fclk, armclk, armdiv_clk; + unsigned long hclk_max; + + fclk = cfg->freq.fclk; + armclk = cfg->freq.armclk; + hclk_max = cfg->max.hclk; + + /* We can't run hclk above armclk as at the best we have to + * have armclk and hclk in dvs mode. */ + + if (hclk_max > armclk) + hclk_max = armclk; + + s3c_freq_dbg("%s: fclk=%lu, armclk=%lu, hclk_max=%lu\n", + __func__, fclk, armclk, hclk_max); + s3c_freq_dbg("%s: want f=%lu, arm=%lu, h=%lu, p=%lu\n", + __func__, cfg->freq.fclk, cfg->freq.armclk, + cfg->freq.hclk, cfg->freq.pclk); + + armdiv = fclk / armclk; + + if (armdiv < 1) + armdiv = 1; + if (armdiv > 2) + armdiv = 2; + + cfg->divs.arm_divisor = armdiv; + armdiv_clk = fclk / armdiv; + + hdiv = armdiv_clk / hclk_max; + if (hdiv < 1) + hdiv = 1; + + cfg->freq.hclk = hclk = armdiv_clk / hdiv; + + /* set dvs depending on whether we reached armclk or not. */ + cfg->divs.dvs = dvs = armclk < armdiv_clk; + + /* update the actual armclk we achieved. */ + cfg->freq.armclk = dvs ? hclk : armdiv_clk; + + s3c_freq_dbg("%s: armclk %lu, hclk %lu, armdiv %d, hdiv %d, dvs %d\n", + __func__, armclk, hclk, armdiv, hdiv, cfg->divs.dvs); + + if (hdiv > 4) + goto invalid; + + pdiv = (hclk > cfg->max.pclk) ? 2 : 1; + + if ((hclk / pdiv) > cfg->max.pclk) + pdiv++; + + cfg->freq.pclk = hclk / pdiv; + + s3c_freq_dbg("%s: pdiv %d\n", __func__, pdiv); + + if (pdiv > 2) + goto invalid; + + pdiv *= hdiv; + + /* store the result, and then return */ + + cfg->divs.h_divisor = hdiv * armdiv; + cfg->divs.p_divisor = pdiv * armdiv; + + return 0; + + invalid: + return -EINVAL; +} + +static void s3c2412_cpufreq_setdivs(struct s3c_cpufreq_config *cfg) +{ + unsigned long clkdiv; + unsigned long olddiv; + + olddiv = clkdiv = __raw_readl(S3C2410_CLKDIVN); + + /* clear off current clock info */ + + clkdiv &= ~S3C2412_CLKDIVN_ARMDIVN; + clkdiv &= ~S3C2412_CLKDIVN_HDIVN_MASK; + clkdiv &= ~S3C2412_CLKDIVN_PDIVN; + + if (cfg->divs.arm_divisor == 2) + clkdiv |= S3C2412_CLKDIVN_ARMDIVN; + + clkdiv |= ((cfg->divs.h_divisor / cfg->divs.arm_divisor) - 1); + + if (cfg->divs.p_divisor != cfg->divs.h_divisor) + clkdiv |= S3C2412_CLKDIVN_PDIVN; + + s3c_freq_dbg("%s: div %08lx => %08lx\n", __func__, olddiv, clkdiv); + __raw_writel(clkdiv, S3C2410_CLKDIVN); + + clk_set_parent(armclk, cfg->divs.dvs ? hclk : fclk); +} + +static void s3c2412_cpufreq_setrefresh(struct s3c_cpufreq_config *cfg) +{ + struct s3c_cpufreq_board *board = cfg->board; + unsigned long refresh; + + s3c_freq_dbg("%s: refresh %u ns, hclk %lu\n", __func__, + board->refresh, cfg->freq.hclk); + + /* Reduce both the refresh time (in ns) and the frequency (in MHz) + * by 10 each to ensure that we do not overflow 32 bit numbers. This + * should work for HCLK up to 133MHz and refresh period up to 30usec. + */ + + refresh = (board->refresh / 10); + refresh *= (cfg->freq.hclk / 100); + refresh /= (1 * 1000 * 1000); /* 10^6 */ + + s3c_freq_dbg("%s: setting refresh 0x%08lx\n", __func__, refresh); + __raw_writel(refresh, S3C2412_REFRESH); +} + +/* set the default cpu frequency information, based on an 200MHz part + * as we have no other way of detecting the speed rating in software. + */ + +static struct s3c_cpufreq_info s3c2412_cpufreq_info = { + .max = { + .fclk = 200000000, + .hclk = 100000000, + .pclk = 50000000, + }, + + .latency = 5000000, /* 5ms */ + + .locktime_m = 150, + .locktime_u = 150, + .locktime_bits = 16, + + .name = "s3c2412", + .set_refresh = s3c2412_cpufreq_setrefresh, + .set_divs = s3c2412_cpufreq_setdivs, + .calc_divs = s3c2412_cpufreq_calcdivs, + + .resume_clocks = s3c2412_setup_clocks, +}; + +static int s3c2412_cpufreq_add(struct sys_device *sysdev) +{ + unsigned long fclk_rate; + + hclk = clk_get(NULL, "hclk"); + if (IS_ERR(hclk)) { + printk(KERN_ERR "%s: cannot find hclk clock\n", __func__); + return -ENOENT; + } + + fclk = clk_get(NULL, "fclk"); + if (IS_ERR(fclk)) { + printk(KERN_ERR "%s: cannot find fclk clock\n", __func__); + goto err_fclk; + } + + fclk_rate = clk_get_rate(fclk); + if (fclk_rate > 200000000) { + printk(KERN_INFO + "%s: fclk %ld MHz, assuming 266MHz capable part\n", + __func__, fclk_rate / 1000000); + s3c2412_cpufreq_info.max.fclk = 266000000; + s3c2412_cpufreq_info.max.hclk = 133000000; + s3c2412_cpufreq_info.max.pclk = 66000000; + } + + armclk = clk_get(NULL, "armclk"); + if (IS_ERR(armclk)) { + printk(KERN_ERR "%s: cannot find arm clock\n", __func__); + goto err_armclk; + } + + xtal = clk_get(NULL, "xtal"); + if (IS_ERR(xtal)) { + printk(KERN_ERR "%s: cannot find xtal clock\n", __func__); + goto err_xtal; + } + + return s3c_cpufreq_register(&s3c2412_cpufreq_info); + +err_xtal: + clk_put(armclk); +err_armclk: + clk_put(fclk); +err_fclk: + clk_put(hclk); + + return -ENOENT; +} + +static struct sysdev_driver s3c2412_cpufreq_driver = { + .add = s3c2412_cpufreq_add, +}; + +static int s3c2412_cpufreq_init(void) +{ + return sysdev_driver_register(&s3c2412_sysclass, + &s3c2412_cpufreq_driver); +} + +arch_initcall(s3c2412_cpufreq_init); -- cgit v1.2.3 From 78ddb2785980fc01b129c3547463266cae9c6ca9 Mon Sep 17 00:00:00 2001 From: Ben Dooks Date: Thu, 30 Jul 2009 23:23:34 +0100 Subject: ARM: PL093: Header file for PL093 SSMC PrimeCell Header to define the standard registers for an PL093 SSMC memory controller. Signed-off-by: Ben Dooks Signed-off-by: Ben Dooks --- include/linux/amba/pl093.h | 80 ++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 80 insertions(+) create mode 100644 include/linux/amba/pl093.h diff --git a/include/linux/amba/pl093.h b/include/linux/amba/pl093.h new file mode 100644 index 00000000000..2983e3671ad --- /dev/null +++ b/include/linux/amba/pl093.h @@ -0,0 +1,80 @@ +/* linux/amba/pl093.h + * + * Copyright (c) 2008 Simtec Electronics + * http://armlinux.simtec.co.uk/ + * Ben Dooks + * + * AMBA PL093 SSMC (synchronous static memory controller) + * See DDI0236.pdf (r0p4) for more details + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#define SMB_BANK(x) ((x) * 0x20) /* each bank control set is 0x20 apart */ + +/* Offsets for SMBxxxxRy registers */ + +#define SMBIDCYR (0x00) +#define SMBWSTRDR (0x04) +#define SMBWSTWRR (0x08) +#define SMBWSTOENR (0x0C) +#define SMBWSTWENR (0x10) +#define SMBCR (0x14) +#define SMBSR (0x18) +#define SMBWSTBRDR (0x1C) + +/* Masks for SMB registers */ +#define IDCY_MASK (0xf) +#define WSTRD_MASK (0xf) +#define WSTWR_MASK (0xf) +#define WSTOEN_MASK (0xf) +#define WSTWEN_MASK (0xf) + +/* Notes from datasheet: + * WSTOEN <= WSTRD + * WSTWEN <= WSTWR + * + * WSTOEN is not used with nWAIT + */ + +/* SMBCR bit definitions */ +#define SMBCR_BIWRITEEN (1 << 21) +#define SMBCR_ADDRVALIDWRITEEN (1 << 20) +#define SMBCR_SYNCWRITE (1 << 17) +#define SMBCR_BMWRITE (1 << 16) +#define SMBCR_WRAPREAD (1 << 14) +#define SMBCR_BIREADEN (1 << 13) +#define SMBCR_ADDRVALIDREADEN (1 << 12) +#define SMBCR_SYNCREAD (1 << 9) +#define SMBCR_BMREAD (1 << 8) +#define SMBCR_SMBLSPOL (1 << 6) +#define SMBCR_WP (1 << 3) +#define SMBCR_WAITEN (1 << 2) +#define SMBCR_WAITPOL (1 << 1) +#define SMBCR_RBLE (1 << 0) + +#define SMBCR_BURSTLENWRITE_MASK (3 << 18) +#define SMBCR_BURSTLENWRITE_4 (0 << 18) +#define SMBCR_BURSTLENWRITE_8 (1 << 18) +#define SMBCR_BURSTLENWRITE_RESERVED (2 << 18) +#define SMBCR_BURSTLENWRITE_CONTINUOUS (3 << 18) + +#define SMBCR_BURSTLENREAD_MASK (3 << 10) +#define SMBCR_BURSTLENREAD_4 (0 << 10) +#define SMBCR_BURSTLENREAD_8 (1 << 10) +#define SMBCR_BURSTLENREAD_16 (2 << 10) +#define SMBCR_BURSTLENREAD_CONTINUOUS (3 << 10) + +#define SMBCR_MW_MASK (3 << 4) +#define SMBCR_MW_8BIT (0 << 4) +#define SMBCR_MW_16BIT (1 << 4) +#define SMBCR_MW_M32BIT (2 << 4) + +/* SSMC status registers */ +#define SSMCCSR (0x200) +#define SSMCCR (0x204) +#define SSMCITCR (0x208) +#define SSMCITIP (0x20C) +#define SSMCITIOP (0x210) -- cgit v1.2.3 From e13cf03eaae3792442c401860910d40f33c89a33 Mon Sep 17 00:00:00 2001 From: Ben Dooks Date: Thu, 30 Jul 2009 23:23:35 +0100 Subject: ARM: S3C: Update CPU register mapping practices. Currently map-base.h defines the main virtual address mappings made for all the support S3C SoC series, but does not then define any base for per-cpu mappings to be made from. Add S3C_ADDR_CPU() macro to define an virtual address as an offset from the last of the core mappings. Signed-off-by: Ben Dooks Signed-off-by: Ben Dooks --- arch/arm/mach-s3c6400/include/mach/map.h | 4 ++-- arch/arm/plat-s3c/include/plat/map-base.h | 8 +++++++- 2 files changed, 9 insertions(+), 3 deletions(-) diff --git a/arch/arm/mach-s3c6400/include/mach/map.h b/arch/arm/mach-s3c6400/include/mach/map.h index 5057d9948d3..e02e6c38a39 100644 --- a/arch/arm/mach-s3c6400/include/mach/map.h +++ b/arch/arm/mach-s3c6400/include/mach/map.h @@ -49,7 +49,7 @@ #define S3C64XX_PA_IIC1 (0x7F00F000) #define S3C64XX_PA_GPIO (0x7F008000) -#define S3C64XX_VA_GPIO S3C_ADDR(0x00500000) +#define S3C64XX_VA_GPIO S3C_ADDR_CPU(0x00000000) #define S3C64XX_SZ_GPIO SZ_4K #define S3C64XX_PA_SDRAM (0x50000000) @@ -57,7 +57,7 @@ #define S3C64XX_PA_VIC1 (0x71300000) #define S3C64XX_PA_MODEM (0x74108000) -#define S3C64XX_VA_MODEM S3C_ADDR(0x00600000) +#define S3C64XX_VA_MODEM S3C_ADDR_CPU(0x00100000) #define S3C64XX_PA_USBHOST (0x74300000) diff --git a/arch/arm/plat-s3c/include/plat/map-base.h b/arch/arm/plat-s3c/include/plat/map-base.h index b84289d32a5..250be311c85 100644 --- a/arch/arm/plat-s3c/include/plat/map-base.h +++ b/arch/arm/plat-s3c/include/plat/map-base.h @@ -32,9 +32,15 @@ #define S3C_VA_IRQ S3C_ADDR(0x00000000) /* irq controller(s) */ #define S3C_VA_SYS S3C_ADDR(0x00100000) /* system control */ -#define S3C_VA_MEM S3C_ADDR(0x00200000) /* system control */ +#define S3C_VA_MEM S3C_ADDR(0x00200000) /* memory control */ #define S3C_VA_TIMER S3C_ADDR(0x00300000) /* timer block */ #define S3C_VA_WATCHDOG S3C_ADDR(0x00400000) /* watchdog */ #define S3C_VA_UART S3C_ADDR(0x01000000) /* UART */ +/* This is used for the CPU specific mappings that may be needed, so that + * they do not need to directly used S3C_ADDR() and thus make it easier to + * modify the space for mapping. + */ +#define S3C_ADDR_CPU(x) S3C_ADDR(0x00500000 + (x)) + #endif /* __ASM_PLAT_MAP_H */ -- cgit v1.2.3 From 25400036867fa7a135fca17810555400d176acaa Mon Sep 17 00:00:00 2001 From: Ben Dooks Date: Thu, 30 Jul 2009 23:23:36 +0100 Subject: ARM: S3C2412: Update memory register mapping and definitions Update the mapping of the memory controler registers and add the missing definitions of the register block for the SSMC. The register contents definitions can be found in the pl093 header. Signed-off-by: Ben Dooks Signed-off-by: Ben Dooks --- arch/arm/mach-s3c2410/include/mach/map.h | 7 +++++++ .../mach-s3c2410/include/mach/regs-s3c2412-mem.h | 23 ++++++++++++++++++++-- arch/arm/mach-s3c2412/s3c2412.c | 12 +++++++++++ 3 files changed, 40 insertions(+), 2 deletions(-) diff --git a/arch/arm/mach-s3c2410/include/mach/map.h b/arch/arm/mach-s3c2410/include/mach/map.h index e99b212cb1c..11cce097550 100644 --- a/arch/arm/mach-s3c2410/include/mach/map.h +++ b/arch/arm/mach-s3c2410/include/mach/map.h @@ -67,6 +67,13 @@ #define S3C2443_PA_HSMMC (0x4A800000) #define S3C2443_SZ_HSMMC (256) +/* S3C2412 memory and IO controls */ +#define S3C2412_PA_SSMC (0x4F000000) +#define S3C2412_VA_SSMC S3C_ADDR_CPU(0x00000000) + +#define S3C2412_PA_EBI (0x48800000) +#define S3C2412_VA_EBI S3C_ADDR_CPU(0x00010000) + /* physical addresses of all the chip-select areas */ #define S3C2410_CS0 (0x00000000) diff --git a/arch/arm/mach-s3c2410/include/mach/regs-s3c2412-mem.h b/arch/arm/mach-s3c2410/include/mach/regs-s3c2412-mem.h index a4bf2712317..fb635251509 100644 --- a/arch/arm/mach-s3c2410/include/mach/regs-s3c2412-mem.h +++ b/arch/arm/mach-s3c2410/include/mach/regs-s3c2412-mem.h @@ -14,9 +14,11 @@ #ifndef __ASM_ARM_REGS_S3C2412_MEM #define __ASM_ARM_REGS_S3C2412_MEM -#ifndef S3C2412_MEMREG #define S3C2412_MEMREG(x) (S3C24XX_VA_MEMCTRL + (x)) -#endif +#define S3C2412_EBIREG(x) (S3C2412_VA_EBI + (x)) + +#define S3C2412_SSMCREG(x) (S3C2412_VA_SSMC + (x)) +#define S3C2412_SSMC(x, o) (S3C2412_SSMCREG((x * 0x20) + (o))) #define S3C2412_BANKCFG S3C2412_MEMREG(0x00) #define S3C2412_BANKCON1 S3C2412_MEMREG(0x04) @@ -26,4 +28,21 @@ #define S3C2412_REFRESH S3C2412_MEMREG(0x10) #define S3C2412_TIMEOUT S3C2412_MEMREG(0x14) +/* EBI control registers */ + +#define S3C2412_EBI_PR S3C2412_EBIREG(0x00) +#define S3C2412_EBI_BANKCFG S3C2412_EBIREG(0x04) + +/* SSMC control registers */ + +#define S3C2412_SSMC_BANK(x) S3C2412_SSMC(x, 0x00) +#define S3C2412_SMIDCYR(x) S3C2412_SSMC(x, 0x00) +#define S3C2412_SMBWSTRD(x) S3C2412_SSMC(x, 0x04) +#define S3C2412_SMBWSTWRR(x) S3C2412_SSMC(x, 0x08) +#define S3C2412_SMBWSTOENR(x) S3C2412_SSMC(x, 0x0C) +#define S3C2412_SMBWSTWENR(x) S3C2412_SSMC(x, 0x10) +#define S3C2412_SMBCR(x) S3C2412_SSMC(x, 0x14) +#define S3C2412_SMBSR(x) S3C2412_SSMC(x, 0x18) +#define S3C2412_SMBWSTBRDR(x) S3C2412_SSMC(x, 0x1C) + #endif /* __ASM_ARM_REGS_S3C2412_MEM */ diff --git a/arch/arm/mach-s3c2412/s3c2412.c b/arch/arm/mach-s3c2412/s3c2412.c index 5b5aba69ec3..bef39f77729 100644 --- a/arch/arm/mach-s3c2412/s3c2412.c +++ b/arch/arm/mach-s3c2412/s3c2412.c @@ -69,6 +69,18 @@ static struct map_desc s3c2412_iodesc[] __initdata = { IODESC_ENT(CLKPWR), IODESC_ENT(TIMER), IODESC_ENT(WATCHDOG), + { + .virtual = (unsigned long)S3C2412_VA_SSMC, + .pfn = __phys_to_pfn(S3C2412_PA_SSMC), + .length = SZ_1M, + .type = MT_DEVICE, + }, + { + .virtual = (unsigned long)S3C2412_VA_EBI, + .pfn = __phys_to_pfn(S3C2412_PA_EBI), + .length = SZ_1M, + .type = MT_DEVICE, + }, }; /* uart registration process */ -- cgit v1.2.3 From 140780ab5a2bc04ccff77337c3a27f3b44182a91 Mon Sep 17 00:00:00 2001 From: Ben Dooks Date: Thu, 30 Jul 2009 23:23:37 +0100 Subject: ARM: S3C24XX: CPUFREQ: S3C2412/S3C2443 IO timing support Add IO bank timing support for S3C2412/S3C2443. Signed-off-by: Ben Dooks Signed-off-by: Ben Dooks --- arch/arm/mach-s3c2412/Kconfig | 3 + arch/arm/mach-s3c2412/cpu-freq.c | 4 + arch/arm/plat-s3c24xx/Kconfig | 9 + arch/arm/plat-s3c24xx/Makefile | 1 + arch/arm/plat-s3c24xx/include/plat/cpu-freq-core.h | 52 +++- arch/arm/plat-s3c24xx/s3c2412-iotiming.c | 261 +++++++++++++++++++++ 6 files changed, 329 insertions(+), 1 deletion(-) create mode 100644 arch/arm/plat-s3c24xx/s3c2412-iotiming.c diff --git a/arch/arm/mach-s3c2412/Kconfig b/arch/arm/mach-s3c2412/Kconfig index 79e18340e07..35c1bde89cf 100644 --- a/arch/arm/mach-s3c2412/Kconfig +++ b/arch/arm/mach-s3c2412/Kconfig @@ -32,9 +32,12 @@ config S3C2412_PM help Internal config node to apply S3C2412 power management +# Note, the S3C2412 IOtiming support is in plat-s3c24xx + config S3C2412_CPUFREQ bool depends on CPU_FREQ_S3C24XX && CPU_S3C2412 + select S3C2412_IOTIMING default y help CPU Frequency scaling support for S3C2412 and S3C2413 SoC CPUs. diff --git a/arch/arm/mach-s3c2412/cpu-freq.c b/arch/arm/mach-s3c2412/cpu-freq.c index 80b20c33447..21a66178d9b 100644 --- a/arch/arm/mach-s3c2412/cpu-freq.c +++ b/arch/arm/mach-s3c2412/cpu-freq.c @@ -185,6 +185,10 @@ static struct s3c_cpufreq_info s3c2412_cpufreq_info = { .set_divs = s3c2412_cpufreq_setdivs, .calc_divs = s3c2412_cpufreq_calcdivs, + .calc_iotiming = s3c2412_iotiming_calc, + .set_iotiming = s3c2412_iotiming_set, + .get_iotiming = s3c2412_iotiming_get, + .resume_clocks = s3c2412_setup_clocks, }; diff --git a/arch/arm/plat-s3c24xx/Kconfig b/arch/arm/plat-s3c24xx/Kconfig index ec9921b6848..f0b9c73fe00 100644 --- a/arch/arm/plat-s3c24xx/Kconfig +++ b/arch/arm/plat-s3c24xx/Kconfig @@ -157,6 +157,15 @@ config S3C2410_CPUFREQ_UTILS Internal node to select timing code that is common to the s3c2410 and s3c2440/s3c244 cpu frequency support. +# cpu frequency support common to s3c2412, s3c2413 and s3c2442 + +config S3C2412_IOTIMING + bool + depends on CPU_FREQ_S3C24XX && (CPU_S3C2412 || CPU_S3C2443) + help + Intel node to select io timing code that is common to the s3c2412 + and the s3c2443. + config MACH_SMDK bool help diff --git a/arch/arm/plat-s3c24xx/Makefile b/arch/arm/plat-s3c24xx/Makefile index c60317b3491..8759c070fd9 100644 --- a/arch/arm/plat-s3c24xx/Makefile +++ b/arch/arm/plat-s3c24xx/Makefile @@ -40,6 +40,7 @@ obj-$(CONFIG_S3C2410_CLOCK) += s3c2410-clock.o obj-$(CONFIG_S3C2410_DMA) += dma.o obj-$(CONFIG_S3C24XX_ADC) += adc.o obj-$(CONFIG_S3C2410_IOTIMING) += s3c2410-iotiming.o +obj-$(CONFIG_S3C2412_IOTIMING) += s3c2412-iotiming.o obj-$(CONFIG_S3C2410_CPUFREQ_UTILS) += s3c2410-cpufreq-utils.o # device specific setup and/or initialisation diff --git a/arch/arm/plat-s3c24xx/include/plat/cpu-freq-core.h b/arch/arm/plat-s3c24xx/include/plat/cpu-freq-core.h index 7938fb0bc38..f02b3c06c1e 100644 --- a/arch/arm/plat-s3c24xx/include/plat/cpu-freq-core.h +++ b/arch/arm/plat-s3c24xx/include/plat/cpu-freq-core.h @@ -42,8 +42,44 @@ struct s3c2410_iobank_timing { unsigned char nwait_en; /* nWait enabled for bank. */ }; +/** + * struct s3c2412_iobank_timing - io timings for PL092 (S3C2412) style IO + * @idcy: The idle cycle time between transactions. + * @wstrd: nCS release to end of read cycle. + * @wstwr: nCS release to end of write cycle. + * @wstoen: nCS assertion to nOE assertion time. + * @wstwen: nCS assertion to nWE assertion time. + * @wstbrd: Burst ready delay. + * @smbidcyr: Register cache for smbidcyr value. + * @smbwstrd: Register cache for smbwstrd value. + * @smbwstwr: Register cache for smbwstwr value. + * @smbwstoen: Register cache for smbwstoen value. + * @smbwstwen: Register cache for smbwstwen value. + * @smbwstbrd: Register cache for smbwstbrd value. + * + * Timing information for a IO bank on an S3C2412 or similar system which + * uses a PL093 block. + */ +struct s3c2412_iobank_timing { + unsigned int idcy; + unsigned int wstrd; + unsigned int wstwr; + unsigned int wstoen; + unsigned int wstwen; + unsigned int wstbrd; + + /* register cache */ + unsigned char smbidcyr; + unsigned char smbwstrd; + unsigned char smbwstwr; + unsigned char smbwstoen; + unsigned char smbwstwen; + unsigned char smbwstbrd; +}; + union s3c_iobank { - struct s3c2410_iobank_timing *io_2410; + struct s3c2410_iobank_timing *io_2410; + struct s3c2412_iobank_timing *io_2412; }; /** @@ -174,6 +210,20 @@ extern void s3c2410_iotiming_set(struct s3c_cpufreq_config *cfg, extern void s3c2410_set_fvco(struct s3c_cpufreq_config *cfg); +/* S3C2412 compatible routines */ + +extern int s3c2412_iotiming_get(struct s3c_cpufreq_config *cfg, + struct s3c_iotimings *timings); + +extern int s3c2412_iotiming_get(struct s3c_cpufreq_config *cfg, + struct s3c_iotimings *timings); + +extern int s3c2412_iotiming_calc(struct s3c_cpufreq_config *cfg, + struct s3c_iotimings *iot); + +extern void s3c2412_iotiming_set(struct s3c_cpufreq_config *cfg, + struct s3c_iotimings *iot); + #ifdef CONFIG_CPU_FREQ_S3C24XX_DEBUG #define s3c_freq_dbg(x...) printk(KERN_INFO x) #else diff --git a/arch/arm/plat-s3c24xx/s3c2412-iotiming.c b/arch/arm/plat-s3c24xx/s3c2412-iotiming.c new file mode 100644 index 00000000000..a3648cba0eb --- /dev/null +++ b/arch/arm/plat-s3c24xx/s3c2412-iotiming.c @@ -0,0 +1,261 @@ +/* linux/arch/arm/plat-s3c24xx/s3c2412-iotiming.c + * + * Copyright (c) 2006,2008 Simtec Electronics + * http://armlinux.simtec.co.uk/ + * Ben Dooks + * + * S3C2412/S3C2443 (PL093 based) IO timing support + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include + +#include +#include + +#include + +#include +#include +#include + +#define print_ns(x) ((x) / 10), ((x) % 10) + +/** + * s3c2412_print_timing - print timing infromation via printk. + * @pfx: The prefix to print each line with. + * @iot: The IO timing information + */ +static void s3c2412_print_timing(const char *pfx, struct s3c_iotimings *iot) +{ + struct s3c2412_iobank_timing *bt; + unsigned int bank; + + for (bank = 0; bank < MAX_BANKS; bank++) { + bt = iot->bank[bank].io_2412; + if (!bt) + continue; + + printk(KERN_DEBUG "%s: %d: idcy=%d.%d wstrd=%d.%d wstwr=%d,%d" + "wstoen=%d.%d wstwen=%d.%d wstbrd=%d.%d\n", pfx, bank, + print_ns(bt->idcy), + print_ns(bt->wstrd), + print_ns(bt->wstwr), + print_ns(bt->wstoen), + print_ns(bt->wstwen), + print_ns(bt->wstbrd)); + } +} + +/** + * to_div - turn a cycle length into a divisor setting. + * @cyc_tns: The cycle time in 10ths of nanoseconds. + * @clk_tns: The clock period in 10ths of nanoseconds. + */ +static inline unsigned int to_div(unsigned int cyc_tns, unsigned int clk_tns) +{ + return cyc_tns ? DIV_ROUND_UP(cyc_tns, clk_tns) : 0; +} + +/** + * calc_timing - calculate timing divisor value and check in range. + * @hwtm: The hardware timing in 10ths of nanoseconds. + * @clk_tns: The clock period in 10ths of nanoseconds. + * @err: Pointer to err variable to update in event of failure. + */ +static unsigned int calc_timing(unsigned int hwtm, unsigned int clk_tns, + unsigned int *err) +{ + unsigned int ret = to_div(hwtm, clk_tns); + + if (ret > 0xf) + *err = -EINVAL; + + return ret; +} + +/** + * s3c2412_calc_bank - calculate the bank divisor settings. + * @cfg: The current frequency configuration. + * @bt: The bank timing. + */ +static int s3c2412_calc_bank(struct s3c_cpufreq_config *cfg, + struct s3c2412_iobank_timing *bt) +{ + unsigned int hclk = cfg->freq.hclk_tns; + int err = 0; + + bt->smbidcyr = calc_timing(bt->idcy, hclk, &err); + bt->smbwstrd = calc_timing(bt->wstrd, hclk, &err); + bt->smbwstwr = calc_timing(bt->wstwr, hclk, &err); + bt->smbwstoen = calc_timing(bt->wstoen, hclk, &err); + bt->smbwstwen = calc_timing(bt->wstwen, hclk, &err); + bt->smbwstbrd = calc_timing(bt->wstbrd, hclk, &err); + + return err; +} + +/** + * s3c2412_iotiming_calc - calculate all the bank divisor settings. + * @cfg: The current frequency configuration. + * @iot: The bank timing information. + * + * Calculate the timing information for all the banks that are + * configured as IO, using s3c2412_calc_bank(). + */ +int s3c2412_iotiming_calc(struct s3c_cpufreq_config *cfg, + struct s3c_iotimings *iot) +{ + struct s3c2412_iobank_timing *bt; + int bank; + int ret; + + for (bank = 0; bank < MAX_BANKS; bank++) { + bt = iot->bank[bank].io_2412; + if (!bt) + continue; + + ret = s3c2412_calc_bank(cfg, bt); + if (ret) { + printk(KERN_ERR "%s: cannot calculate bank %d io\n", + __func__, bank); + goto err; + } + } + + return 0; + err: + return ret; +} + +/** + * s3c2412_iotiming_set - set the timing information + * @cfg: The current frequency configuration. + * @iot: The bank timing information. + * + * Set the IO bank information from the details calculated earlier from + * calling s3c2412_iotiming_calc(). + */ +void s3c2412_iotiming_set(struct s3c_cpufreq_config *cfg, + struct s3c_iotimings *iot) +{ + struct s3c2412_iobank_timing *bt; + void __iomem *regs; + int bank; + + /* set the io timings from the specifier */ + + for (bank = 0; bank < MAX_BANKS; bank++) { + bt = iot->bank[bank].io_2412; + if (!bt) + continue; + + regs = S3C2412_SSMC_BANK(bank); + + __raw_writel(bt->smbidcyr, regs + SMBIDCYR); + __raw_writel(bt->smbwstrd, regs + SMBWSTRDR); + __raw_writel(bt->smbwstwr, regs + SMBWSTWRR); + __raw_writel(bt->smbwstoen, regs + SMBWSTOENR); + __raw_writel(bt->smbwstwen, regs + SMBWSTWENR); + __raw_writel(bt->smbwstbrd, regs + SMBWSTBRDR); + } +} + +static inline unsigned int s3c2412_decode_timing(unsigned int clock, u32 reg) +{ + return (reg & 0xf) * clock; +} + +static void s3c2412_iotiming_getbank(struct s3c_cpufreq_config *cfg, + struct s3c2412_iobank_timing *bt, + unsigned int bank) +{ + unsigned long clk = cfg->freq.hclk_tns; /* ssmc clock??? */ + void __iomem *regs = S3C2412_SSMC_BANK(bank); + + bt->idcy = s3c2412_decode_timing(clk, __raw_readl(regs + SMBIDCYR)); + bt->wstrd = s3c2412_decode_timing(clk, __raw_readl(regs + SMBWSTRDR)); + bt->wstoen = s3c2412_decode_timing(clk, __raw_readl(regs + SMBWSTOENR)); + bt->wstwen = s3c2412_decode_timing(clk, __raw_readl(regs + SMBWSTWENR)); + bt->wstbrd = s3c2412_decode_timing(clk, __raw_readl(regs + SMBWSTBRDR)); +} + +/** + * bank_is_io - return true if bank is (possibly) IO. + * @bank: The bank number. + * @bankcfg: The value of S3C2412_EBI_BANKCFG. + */ +static inline bool bank_is_io(unsigned int bank, u32 bankcfg) +{ + if (bank < 2) + return true; + + return !(bankcfg & (1 << bank)); +} + +int s3c2412_iotiming_get(struct s3c_cpufreq_config *cfg, + struct s3c_iotimings *timings) +{ + struct s3c2412_iobank_timing *bt; + u32 bankcfg = __raw_readl(S3C2412_EBI_BANKCFG); + unsigned int bank; + + /* look through all banks to see what is currently set. */ + + for (bank = 0; bank < MAX_BANKS; bank++) { + if (!bank_is_io(bank, bankcfg)) + continue; + + bt = kzalloc(sizeof(struct s3c2412_iobank_timing), GFP_KERNEL); + if (!bt) { + printk(KERN_ERR "%s: no memory for bank\n", __func__); + return -ENOMEM; + } + + timings->bank[bank].io_2412 = bt; + s3c2412_iotiming_getbank(cfg, bt, bank); + } + + s3c2412_print_timing("get", timings); + return 0; +} + +/* this is in here as it is so small, it doesn't currently warrant a file + * to itself. We expect that any s3c24xx needing this is going to also + * need the iotiming support. + */ +void s3c2412_cpufreq_setrefresh(struct s3c_cpufreq_config *cfg) +{ + struct s3c_cpufreq_board *board = cfg->board; + u32 refresh; + + WARN_ON(board == NULL); + + /* Reduce both the refresh time (in ns) and the frequency (in MHz) + * down to ensure that we do not overflow 32 bit numbers. + * + * This should work for HCLK up to 133MHz and refresh period up + * to 30usec. + */ + + refresh = (cfg->freq.hclk / 100) * (board->refresh / 10); + refresh = DIV_ROUND_UP(refresh, (1000 * 1000)); /* apply scale */ + refresh &= ((1 << 16) - 1); + + s3c_freq_dbg("%s: refresh value %u\n", __func__, (unsigned int)refresh); + + __raw_writel(refresh, S3C2412_REFRESH); +} -- cgit v1.2.3 From f0176794b6abc2e5239c07a58cf11b6f43d0f185 Mon Sep 17 00:00:00 2001 From: Ben Dooks Date: Thu, 30 Jul 2009 23:23:38 +0100 Subject: ARM: S3C2410: Add S3C2410A sysdev. Add a sysdev S3C2410A sysdev to allow the differentiation of the S3C2410A from the S3C2410. This is needed for the CPUFREQ code to enable the extra features and update cpu specific information. Signed-off-by: Ben Dooks Signed-off-by: Ben Dooks --- arch/arm/mach-s3c2410/dma.c | 11 +++++++++++ arch/arm/mach-s3c2410/irq.c | 15 ++++++++++++++- arch/arm/mach-s3c2410/pm.c | 12 ++++++++++++ arch/arm/mach-s3c2410/s3c2410.c | 20 ++++++++++++++++++++ arch/arm/plat-s3c/include/plat/cpu.h | 1 + arch/arm/plat-s3c24xx/cpu.c | 2 +- arch/arm/plat-s3c24xx/include/plat/s3c2410.h | 1 + 7 files changed, 60 insertions(+), 2 deletions(-) diff --git a/arch/arm/mach-s3c2410/dma.c b/arch/arm/mach-s3c2410/dma.c index dbf96e60d99..63b753f56c6 100644 --- a/arch/arm/mach-s3c2410/dma.c +++ b/arch/arm/mach-s3c2410/dma.c @@ -164,6 +164,17 @@ static int __init s3c2410_dma_drvinit(void) } arch_initcall(s3c2410_dma_drvinit); + +static struct sysdev_driver s3c2410a_dma_driver = { + .add = s3c2410_dma_add, +}; + +static int __init s3c2410a_dma_drvinit(void) +{ + return sysdev_driver_register(&s3c2410a_sysclass, &s3c2410a_dma_driver); +} + +arch_initcall(s3c2410a_dma_drvinit); #endif #if defined(CONFIG_CPU_S3C2442) diff --git a/arch/arm/mach-s3c2410/irq.c b/arch/arm/mach-s3c2410/irq.c index 92150399563..5e2f3533205 100644 --- a/arch/arm/mach-s3c2410/irq.c +++ b/arch/arm/mach-s3c2410/irq.c @@ -39,9 +39,22 @@ static struct sysdev_driver s3c2410_irq_driver = { .resume = s3c24xx_irq_resume, }; -static int s3c2410_irq_init(void) +static int __init s3c2410_irq_init(void) { return sysdev_driver_register(&s3c2410_sysclass, &s3c2410_irq_driver); } arch_initcall(s3c2410_irq_init); + +static struct sysdev_driver s3c2410a_irq_driver = { + .add = s3c2410_irq_add, + .suspend = s3c24xx_irq_suspend, + .resume = s3c24xx_irq_resume, +}; + +static int __init s3c2410a_irq_init(void) +{ + return sysdev_driver_register(&s3c2410a_sysclass, &s3c2410a_irq_driver); +} + +arch_initcall(s3c2410a_irq_init); diff --git a/arch/arm/mach-s3c2410/pm.c b/arch/arm/mach-s3c2410/pm.c index 143e08a599d..966119c8efe 100644 --- a/arch/arm/mach-s3c2410/pm.c +++ b/arch/arm/mach-s3c2410/pm.c @@ -119,6 +119,18 @@ static int __init s3c2410_pm_drvinit(void) } arch_initcall(s3c2410_pm_drvinit); + +static struct sysdev_driver s3c2410a_pm_driver = { + .add = s3c2410_pm_add, + .resume = s3c2410_pm_resume, +}; + +static int __init s3c2410a_pm_drvinit(void) +{ + return sysdev_driver_register(&s3c2410a_sysclass, &s3c2410a_pm_driver); +} + +arch_initcall(s3c2410a_pm_drvinit); #endif #if defined(CONFIG_CPU_S3C2440) diff --git a/arch/arm/mach-s3c2410/s3c2410.c b/arch/arm/mach-s3c2410/s3c2410.c index feb141b1f91..e5724a22c35 100644 --- a/arch/arm/mach-s3c2410/s3c2410.c +++ b/arch/arm/mach-s3c2410/s3c2410.c @@ -116,6 +116,13 @@ struct sysdev_class s3c2410_sysclass = { .name = "s3c2410-core", }; +/* Note, we would have liked to name this s3c2410-core, but we cannot + * register two sysdev_class with the same name. + */ +struct sysdev_class s3c2410a_sysclass = { + .name = "s3c2410a-core", +}; + static struct sys_device s3c2410_sysdev = { .cls = &s3c2410_sysclass, }; @@ -133,9 +140,22 @@ static int __init s3c2410_core_init(void) core_initcall(s3c2410_core_init); +static int __init s3c2410a_core_init(void) +{ + return sysdev_class_register(&s3c2410a_sysclass); +} + +core_initcall(s3c2410a_core_init); + int __init s3c2410_init(void) { printk("S3C2410: Initialising architecture\n"); return sysdev_register(&s3c2410_sysdev); } + +int __init s3c2410a_init(void) +{ + s3c2410_sysdev.cls = &s3c2410a_sysclass; + return s3c2410_init(); +} diff --git a/arch/arm/plat-s3c/include/plat/cpu.h b/arch/arm/plat-s3c/include/plat/cpu.h index be541cbba07..fbc3d498e02 100644 --- a/arch/arm/plat-s3c/include/plat/cpu.h +++ b/arch/arm/plat-s3c/include/plat/cpu.h @@ -65,6 +65,7 @@ extern struct sys_timer s3c24xx_timer; /* system device classes */ extern struct sysdev_class s3c2410_sysclass; +extern struct sysdev_class s3c2410a_sysclass; extern struct sysdev_class s3c2412_sysclass; extern struct sysdev_class s3c2440_sysclass; extern struct sysdev_class s3c2442_sysclass; diff --git a/arch/arm/plat-s3c24xx/cpu.c b/arch/arm/plat-s3c24xx/cpu.c index 1932b7e0da1..5447e60f393 100644 --- a/arch/arm/plat-s3c24xx/cpu.c +++ b/arch/arm/plat-s3c24xx/cpu.c @@ -81,7 +81,7 @@ static struct cpu_table cpu_ids[] __initdata = { .map_io = s3c2410_map_io, .init_clocks = s3c2410_init_clocks, .init_uarts = s3c2410_init_uarts, - .init = s3c2410_init, + .init = s3c2410a_init, .name = name_s3c2410a }, { diff --git a/arch/arm/plat-s3c24xx/include/plat/s3c2410.h b/arch/arm/plat-s3c24xx/include/plat/s3c2410.h index a9ac9e29759..b6deeef8f66 100644 --- a/arch/arm/plat-s3c24xx/include/plat/s3c2410.h +++ b/arch/arm/plat-s3c24xx/include/plat/s3c2410.h @@ -14,6 +14,7 @@ #ifdef CONFIG_CPU_S3C2410 extern int s3c2410_init(void); +extern int s3c2410a_init(void); extern void s3c2410_map_io(void); -- cgit v1.2.3 From ca0b4901d8faaf98cf254e25cd2784bcb21e46d5 Mon Sep 17 00:00:00 2001 From: Ben Dooks Date: Thu, 30 Jul 2009 23:23:39 +0100 Subject: ARM: BAST: CPUFREQ: Add board support Add board support for CPUFREQ with the Simtec BAST board registering the necessary information with the core. Signed-off-by: Ben Dooks Signed-off-by: Ben Dooks --- arch/arm/mach-s3c2410/mach-bast.c | 9 +++++++++ 1 file changed, 9 insertions(+) diff --git a/arch/arm/mach-s3c2410/mach-bast.c b/arch/arm/mach-s3c2410/mach-bast.c index ce3baba2cd7..d8a26ea92f2 100644 --- a/arch/arm/mach-s3c2410/mach-bast.c +++ b/arch/arm/mach-s3c2410/mach-bast.c @@ -59,6 +59,7 @@ #include #include #include +#include #include "usb-simtec.h" #include "nor-simtec.h" @@ -570,6 +571,12 @@ static struct clk *bast_clocks[] __initdata = { &s3c24xx_uclk, }; +static struct s3c_cpufreq_board __initdata bast_cpufreq = { + .refresh = 7800, /* 7.8usec */ + .auto_io = 1, + .need_io = 1, +}; + static void __init bast_map_io(void) { /* initialise the clocks */ @@ -608,6 +615,8 @@ static void __init bast_init(void) usb_simtec_init(); nor_simtec_init(); + + s3c_cpufreq_setboard(&bast_cpufreq); } MACHINE_START(BAST, "Simtec-BAST") -- cgit v1.2.3 From ad78759529be38d6aa062233b980095cf74aa7f0 Mon Sep 17 00:00:00 2001 From: Ben Dooks Date: Thu, 30 Jul 2009 23:23:40 +0100 Subject: ARM: S3C2410: Add armclk for cpufreq support Add armclk for use with the cpufreq support and anything else that may want it. This clock is just a direct descendant of fclk. Signed-off-by: Ben Dooks Signed-off-by: Ben Dooks --- arch/arm/mach-s3c2410/s3c2410.c | 9 +++++++++ 1 file changed, 9 insertions(+) diff --git a/arch/arm/mach-s3c2410/s3c2410.c b/arch/arm/mach-s3c2410/s3c2410.c index e5724a22c35..91ba42f688a 100644 --- a/arch/arm/mach-s3c2410/s3c2410.c +++ b/arch/arm/mach-s3c2410/s3c2410.c @@ -105,11 +105,20 @@ void __init_or_cpufreq s3c2410_setup_clocks(void) s3c24xx_setup_clocks(fclk, hclk, pclk); } +/* fake ARMCLK for use with cpufreq, etc. */ + +static struct clk s3c2410_armclk = { + .name = "armclk", + .parent = &clk_f, + .id = -1, +}; + void __init s3c2410_init_clocks(int xtal) { s3c24xx_register_baseclocks(xtal); s3c2410_setup_clocks(); s3c2410_baseclk_add(); + s3c24xx_register_clock(&s3c2410_armclk); } struct sysdev_class s3c2410_sysclass = { -- cgit v1.2.3 From dfff4e95d749c414af3f7350835139103408a50d Mon Sep 17 00:00:00 2001 From: Ben Dooks Date: Thu, 30 Jul 2009 23:23:41 +0100 Subject: ARM: S3C: CPUFREQ: Add documentation for system Add documentation for the S3C24XX style CPUFREQ driver. Signed-off-by: Ben Dooks Signed-off-by: Ben Dooks --- Documentation/arm/Samsung-S3C24XX/CPUfreq.txt | 75 +++++++++++++++++++++++++++ 1 file changed, 75 insertions(+) create mode 100644 Documentation/arm/Samsung-S3C24XX/CPUfreq.txt diff --git a/Documentation/arm/Samsung-S3C24XX/CPUfreq.txt b/Documentation/arm/Samsung-S3C24XX/CPUfreq.txt new file mode 100644 index 00000000000..76b3a11e90b --- /dev/null +++ b/Documentation/arm/Samsung-S3C24XX/CPUfreq.txt @@ -0,0 +1,75 @@ + S3C24XX CPUfreq support + ======================= + +Introduction +------------ + + The S3C24XX series support a number of power saving systems, such as + the ability to change the core, memory and peripheral operating + frequencies. The core control is exported via the CPUFreq driver + which has a number of different manual or automatic controls over the + rate the core is running at. + + There are two forms of the driver depending on the specific CPU and + how the clocks are arranged. The first implementation used as single + PLL to feed the ARM, memory and peripherals via a series of dividers + and muxes and this is the implementation that is documented here. A + newer version where there is a seperate PLL and clock divider for the + ARM core is available as a seperate driver. + + +Layout +------ + + The code core manages the CPU specific drivers, any data that they + need to register and the interface to the generic drivers/cpufreq + system. Each CPU registers a driver to control the PLL, clock dividers + and anything else associated with it. Any board that wants to use this + framework needs to supply at least basic details of what is required. + + The core registers with drivers/cpufreq at init time if all the data + necessary has been supplied. + + +CPU support +----------- + + The support for each CPU depends on the facilities provided by the + SoC and the driver as each device has different PLL and clock chains + associated with it. + + +Slow Mode +--------- + + The SLOW mode where the PLL is turned off altogether and the + system is fed by the external crystal input is currently not + supported. + + +sysfs +----- + + The core code exports extra information via sysfs in the directory + devices/system/cpu/cpu0/arch-freq. + + +Board Support +------------- + + Each board that wants to use the cpufreq code must register some basic + information with the core driver to provide information about what the + board requires and any restrictions being placed on it. + + The board needs to supply information about whether it needs the IO bank + timings changing, any maximum frequency limits and information about the + SDRAM refresh rate. + + + + +Document Author +--------------- + +Ben Dooks, Copyright 2009 Simtec Electronics +Licensed under GPLv2 -- cgit v1.2.3 From e6d197a6954c8a9ff85727c31ca61fc1da78628a Mon Sep 17 00:00:00 2001 From: Ben Dooks Date: Thu, 30 Jul 2009 23:23:42 +0100 Subject: ARM: S3C: CPUFREQ: Add debugfs support for cpufreq Add debugfs support for the cpufreq driver to allow information about the system state to be exported to the user. Signed-off-by: Ben Dooks Signed-off-by: Ben Dooks --- arch/arm/Kconfig | 6 + arch/arm/mach-s3c2410/cpu-freq.c | 2 + arch/arm/mach-s3c2412/cpu-freq.c | 2 + arch/arm/plat-s3c24xx/Makefile | 1 + arch/arm/plat-s3c24xx/cpu-freq-debugfs.c | 199 +++++++++++++++++++++ arch/arm/plat-s3c24xx/cpu-freq.c | 12 ++ arch/arm/plat-s3c24xx/include/plat/cpu-freq-core.h | 24 +++ arch/arm/plat-s3c24xx/s3c2410-iotiming.c | 45 +++++ arch/arm/plat-s3c24xx/s3c2412-iotiming.c | 24 +++ arch/arm/plat-s3c24xx/s3c2440-cpufreq.c | 2 + 10 files changed, 317 insertions(+) create mode 100644 arch/arm/plat-s3c24xx/cpu-freq-debugfs.c diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index c7a83efef0b..f07a4ba281b 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -1329,6 +1329,12 @@ config CPU_FREQ_S3C24XX_IODEBUG help Enable s3c_freq_iodbg for the Samsung S3C CPUfreq core +config CPU_FREQ_S3C24XX_DEBUGFS + bool "Export debugfs for CPUFreq" + depends on CPU_FREQ_S3C24XX && DEBUG_FS + help + Export status information via debugfs. + endif source "drivers/cpuidle/Kconfig" diff --git a/arch/arm/mach-s3c2410/cpu-freq.c b/arch/arm/mach-s3c2410/cpu-freq.c index f2cbdbab0df..9d1186877d0 100644 --- a/arch/arm/mach-s3c2410/cpu-freq.c +++ b/arch/arm/mach-s3c2410/cpu-freq.c @@ -111,6 +111,8 @@ static struct s3c_cpufreq_info s3c2410_cpufreq_info = { .set_refresh = s3c2410_cpufreq_setrefresh, .set_divs = s3c2410_cpufreq_setdivs, .calc_divs = s3c2410_cpufreq_calcdivs, + + .debug_io_show = s3c_cpufreq_debugfs_call(s3c2410_iotiming_debugfs), }; static int s3c2410_cpufreq_add(struct sys_device *sysdev) diff --git a/arch/arm/mach-s3c2412/cpu-freq.c b/arch/arm/mach-s3c2412/cpu-freq.c index 21a66178d9b..eb3ea172133 100644 --- a/arch/arm/mach-s3c2412/cpu-freq.c +++ b/arch/arm/mach-s3c2412/cpu-freq.c @@ -190,6 +190,8 @@ static struct s3c_cpufreq_info s3c2412_cpufreq_info = { .get_iotiming = s3c2412_iotiming_get, .resume_clocks = s3c2412_setup_clocks, + + .debug_io_show = s3c_cpufreq_debugfs_call(s3c2412_iotiming_debugfs), }; static int s3c2412_cpufreq_add(struct sys_device *sysdev) diff --git a/arch/arm/plat-s3c24xx/Makefile b/arch/arm/plat-s3c24xx/Makefile index 8759c070fd9..f3493751580 100644 --- a/arch/arm/plat-s3c24xx/Makefile +++ b/arch/arm/plat-s3c24xx/Makefile @@ -21,6 +21,7 @@ obj-y += clock.o obj-$(CONFIG_S3C24XX_DCLK) += clock-dclk.o obj-$(CONFIG_CPU_FREQ_S3C24XX) += cpu-freq.o +obj-$(CONFIG_CPU_FREQ_S3C24XX_DEBUGFS) += cpu-freq-debugfs.o # Architecture dependant builds diff --git a/arch/arm/plat-s3c24xx/cpu-freq-debugfs.c b/arch/arm/plat-s3c24xx/cpu-freq-debugfs.c new file mode 100644 index 00000000000..a9276667c2f --- /dev/null +++ b/arch/arm/plat-s3c24xx/cpu-freq-debugfs.c @@ -0,0 +1,199 @@ +/* linux/arch/arm/plat-s3c24xx/cpu-freq-debugfs.c + * + * Copyright (c) 2009 Simtec Electronics + * http://armlinux.simtec.co.uk/ + * Ben Dooks + * + * S3C24XX CPU Frequency scaling - debugfs status support + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#include +#include +#include +#include +#include +#include +#include +#include + +#include + +static struct dentry *dbgfs_root; +static struct dentry *dbgfs_file_io; +static struct dentry *dbgfs_file_info; +static struct dentry *dbgfs_file_board; + +#define print_ns(x) ((x) / 10), ((x) % 10) + +static void show_max(struct seq_file *seq, struct s3c_freq *f) +{ + seq_printf(seq, "MAX: F=%lu, H=%lu, P=%lu, A=%lu\n", + f->fclk, f->hclk, f->pclk, f->armclk); +} + +static int board_show(struct seq_file *seq, void *p) +{ + struct s3c_cpufreq_config *cfg; + struct s3c_cpufreq_board *brd; + + cfg = s3c_cpufreq_getconfig(); + if (!cfg) { + seq_printf(seq, "no configuration registered\n"); + return 0; + } + + brd = cfg->board; + if (!brd) { + seq_printf(seq, "no board definition set?\n"); + return 0; + } + + seq_printf(seq, "SDRAM refresh %u ns\n", brd->refresh); + seq_printf(seq, "auto_io=%u\n", brd->auto_io); + seq_printf(seq, "need_io=%u\n", brd->need_io); + + show_max(seq, &brd->max); + + + return 0; +} + +static int fops_board_open(struct inode *inode, struct file *file) +{ + return single_open(file, board_show, NULL); +} + +static const struct file_operations fops_board = { + .open = fops_board_open, + .read = seq_read, + .llseek = seq_lseek, + .release = single_release, + .owner = THIS_MODULE, +}; + +static int info_show(struct seq_file *seq, void *p) +{ + struct s3c_cpufreq_config *cfg; + + cfg = s3c_cpufreq_getconfig(); + if (!cfg) { + seq_printf(seq, "no configuration registered\n"); + return 0; + } + + seq_printf(seq, " FCLK %ld Hz\n", cfg->freq.fclk); + seq_printf(seq, " HCLK %ld Hz (%lu.%lu ns)\n", + cfg->freq.hclk, print_ns(cfg->freq.hclk_tns)); + seq_printf(seq, " PCLK %ld Hz\n", cfg->freq.hclk); + seq_printf(seq, "ARMCLK %ld Hz\n", cfg->freq.armclk); + seq_printf(seq, "\n"); + + show_max(seq, &cfg->max); + + seq_printf(seq, "Divisors: P=%d, H=%d, A=%d, dvs=%s\n", + cfg->divs.h_divisor, cfg->divs.p_divisor, + cfg->divs.arm_divisor, cfg->divs.dvs ? "on" : "off"); + seq_printf(seq, "\n"); + + seq_printf(seq, "lock_pll=%u\n", cfg->lock_pll); + + return 0; +} + +static int fops_info_open(struct inode *inode, struct file *file) +{ + return single_open(file, info_show, NULL); +} + +static const struct file_operations fops_info = { + .open = fops_info_open, + .read = seq_read, + .llseek = seq_lseek, + .release = single_release, + .owner = THIS_MODULE, +}; + +static int io_show(struct seq_file *seq, void *p) +{ + void (*show_bank)(struct seq_file *, struct s3c_cpufreq_config *, union s3c_iobank *); + struct s3c_cpufreq_config *cfg; + struct s3c_iotimings *iot; + union s3c_iobank *iob; + int bank; + + cfg = s3c_cpufreq_getconfig(); + if (!cfg) { + seq_printf(seq, "no configuration registered\n"); + return 0; + } + + show_bank = cfg->info->debug_io_show; + if (!show_bank) { + seq_printf(seq, "no code to show bank timing\n"); + return 0; + } + + iot = s3c_cpufreq_getiotimings(); + if (!iot) { + seq_printf(seq, "no io timings registered\n"); + return 0; + } + + seq_printf(seq, "hclk period is %lu.%lu ns\n", print_ns(cfg->freq.hclk_tns)); + + for (bank = 0; bank < MAX_BANKS; bank++) { + iob = &iot->bank[bank]; + + seq_printf(seq, "bank %d: ", bank); + + if (!iob->io_2410) { + seq_printf(seq, "nothing set\n"); + continue; + } + + show_bank(seq, cfg, iob); + } + + return 0; +} + +static int fops_io_open(struct inode *inode, struct file *file) +{ + return single_open(file, io_show, NULL); +} + +static const struct file_operations fops_io = { + .open = fops_io_open, + .read = seq_read, + .llseek = seq_lseek, + .release = single_release, + .owner = THIS_MODULE, +}; + + +static int __init s3c_freq_debugfs_init(void) +{ + dbgfs_root = debugfs_create_dir("s3c-cpufreq", NULL); + if (IS_ERR(dbgfs_root)) { + printk(KERN_ERR "%s: error creating debugfs root\n", __func__); + return PTR_ERR(dbgfs_root); + } + + dbgfs_file_io = debugfs_create_file("io-timing", S_IRUGO, dbgfs_root, + NULL, &fops_io); + + dbgfs_file_info = debugfs_create_file("info", S_IRUGO, dbgfs_root, + NULL, &fops_info); + + dbgfs_file_board = debugfs_create_file("board", S_IRUGO, dbgfs_root, + NULL, &fops_board); + + return 0; +} + +late_initcall(s3c_freq_debugfs_init); + diff --git a/arch/arm/plat-s3c24xx/cpu-freq.c b/arch/arm/plat-s3c24xx/cpu-freq.c index 40ff7e2569d..4f1b789a117 100644 --- a/arch/arm/plat-s3c24xx/cpu-freq.c +++ b/arch/arm/plat-s3c24xx/cpu-freq.c @@ -50,6 +50,18 @@ static struct clk *clk_hclk; static struct clk *clk_pclk; static struct clk *clk_arm; +#ifdef CONFIG_CPU_FREQ_S3C24XX_DEBUGFS +struct s3c_cpufreq_config *s3c_cpufreq_getconfig(void) +{ + return &cpu_cur; +} + +struct s3c_iotimings *s3c_cpufreq_getiotimings(void) +{ + return &s3c24xx_iotiming; +} +#endif /* CONFIG_CPU_FREQ_S3C24XX_DEBUGFS */ + static void s3c_cpufreq_getcur(struct s3c_cpufreq_config *cfg) { unsigned long fclk, pclk, hclk, armclk; diff --git a/arch/arm/plat-s3c24xx/include/plat/cpu-freq-core.h b/arch/arm/plat-s3c24xx/include/plat/cpu-freq-core.h index f02b3c06c1e..efeb025affc 100644 --- a/arch/arm/plat-s3c24xx/include/plat/cpu-freq-core.h +++ b/arch/arm/plat-s3c24xx/include/plat/cpu-freq-core.h @@ -13,6 +13,8 @@ #include +struct seq_file; + #define MAX_BANKS (8) #define S3C2412_MAX_IO (8) @@ -181,6 +183,10 @@ struct s3c_cpufreq_info { struct cpufreq_frequency_table *t, size_t table_size); + void (*debug_io_show)(struct seq_file *seq, + struct s3c_cpufreq_config *cfg, + union s3c_iobank *iob); + void (*set_refresh)(struct s3c_cpufreq_config *cfg); void (*set_fvco)(struct s3c_cpufreq_config *cfg); void (*set_divs)(struct s3c_cpufreq_config *cfg); @@ -191,6 +197,24 @@ extern int s3c_cpufreq_register(struct s3c_cpufreq_info *info); extern int s3c_plltab_register(struct cpufreq_frequency_table *plls, unsigned int plls_no); +/* exports and utilities for debugfs */ +extern struct s3c_cpufreq_config *s3c_cpufreq_getconfig(void); +extern struct s3c_iotimings *s3c_cpufreq_getiotimings(void); + +extern void s3c2410_iotiming_debugfs(struct seq_file *seq, + struct s3c_cpufreq_config *cfg, + union s3c_iobank *iob); + +extern void s3c2412_iotiming_debugfs(struct seq_file *seq, + struct s3c_cpufreq_config *cfg, + union s3c_iobank *iob); + +#ifdef CONFIG_CPU_FREQ_S3C24XX_DEBUGFS +#define s3c_cpufreq_debugfs_call(x) x +#else +#define s3c_cpufreq_debugfs_call(x) NULL +#endif + /* Useful utility functions. */ extern struct clk *s3c_cpufreq_clk_get(struct device *, const char *); diff --git a/arch/arm/plat-s3c24xx/s3c2410-iotiming.c b/arch/arm/plat-s3c24xx/s3c2410-iotiming.c index 26fe2129cf2..d0a3a145cd4 100644 --- a/arch/arm/plat-s3c24xx/s3c2410-iotiming.c +++ b/arch/arm/plat-s3c24xx/s3c2410-iotiming.c @@ -15,6 +15,7 @@ #include #include #include +#include #include #include @@ -303,6 +304,50 @@ void s3c2410_iotiming_getbank(struct s3c_cpufreq_config *cfg, bt->tacc = get_tacc(hclk, bankcon >> S3C2410_BANKCON_Tacc_SHIFT); } +/** + * s3c2410_iotiming_debugfs - debugfs show io bank timing information + * @seq: The seq_file to write output to using seq_printf(). + * @cfg: The current configuration. + * @iob: The IO bank information to decode. + */ +void s3c2410_iotiming_debugfs(struct seq_file *seq, + struct s3c_cpufreq_config *cfg, + union s3c_iobank *iob) +{ + struct s3c2410_iobank_timing *bt = iob->io_2410; + unsigned long bankcon = bt->bankcon; + unsigned long hclk = cfg->freq.hclk_tns; + unsigned int tacs; + unsigned int tcos; + unsigned int tacc; + unsigned int tcoh; + unsigned int tcah; + + seq_printf(seq, "BANKCON=0x%08lx\n", bankcon); + + tcah = get_0124(hclk, bankcon >> S3C2410_BANKCON_Tcah_SHIFT); + tcoh = get_0124(hclk, bankcon >> S3C2410_BANKCON_Tcoh_SHIFT); + tcos = get_0124(hclk, bankcon >> S3C2410_BANKCON_Tcos_SHIFT); + tacs = get_0124(hclk, bankcon >> S3C2410_BANKCON_Tacs_SHIFT); + tacc = get_tacc(hclk, bankcon >> S3C2410_BANKCON_Tacc_SHIFT); + + seq_printf(seq, + "\tRead: Tacs=%d.%d, Tcos=%d.%d, Tacc=%d.%d, Tcoh=%d.%d, Tcah=%d.%d\n", + print_ns(bt->tacs), + print_ns(bt->tcos), + print_ns(bt->tacc), + print_ns(bt->tcoh), + print_ns(bt->tcah)); + + seq_printf(seq, + "\t Set: Tacs=%d.%d, Tcos=%d.%d, Tacc=%d.%d, Tcoh=%d.%d, Tcah=%d.%d\n", + print_ns(tacs), + print_ns(tcos), + print_ns(tacc), + print_ns(tcoh), + print_ns(tcah)); +} + /** * s3c2410_iotiming_calc - Calculate bank timing for frequency change. * @cfg: The frequency configuration diff --git a/arch/arm/plat-s3c24xx/s3c2412-iotiming.c b/arch/arm/plat-s3c24xx/s3c2412-iotiming.c index a3648cba0eb..fd45e47facb 100644 --- a/arch/arm/plat-s3c24xx/s3c2412-iotiming.c +++ b/arch/arm/plat-s3c24xx/s3c2412-iotiming.c @@ -16,6 +16,7 @@ #include #include #include +#include #include #include #include @@ -108,6 +109,29 @@ static int s3c2412_calc_bank(struct s3c_cpufreq_config *cfg, return err; } +/** + * s3c2412_iotiming_debugfs - debugfs show io bank timing information + * @seq: The seq_file to write output to using seq_printf(). + * @cfg: The current configuration. + * @iob: The IO bank information to decode. +*/ +void s3c2412_iotiming_debugfs(struct seq_file *seq, + struct s3c_cpufreq_config *cfg, + union s3c_iobank *iob) +{ + struct s3c2412_iobank_timing *bt = iob->io_2412; + + seq_printf(seq, + "\tRead: idcy=%d.%d wstrd=%d.%d wstwr=%d,%d" + "wstoen=%d.%d wstwen=%d.%d wstbrd=%d.%d\n", + print_ns(bt->idcy), + print_ns(bt->wstrd), + print_ns(bt->wstwr), + print_ns(bt->wstoen), + print_ns(bt->wstwen), + print_ns(bt->wstbrd)); +} + /** * s3c2412_iotiming_calc - calculate all the bank divisor settings. * @cfg: The current frequency configuration. diff --git a/arch/arm/plat-s3c24xx/s3c2440-cpufreq.c b/arch/arm/plat-s3c24xx/s3c2440-cpufreq.c index c177a20319e..ae2e6c604f2 100644 --- a/arch/arm/plat-s3c24xx/s3c2440-cpufreq.c +++ b/arch/arm/plat-s3c24xx/s3c2440-cpufreq.c @@ -266,6 +266,8 @@ struct s3c_cpufreq_info s3c2440_cpufreq_info = { .calc_freqtable = s3c2440_cpufreq_calctable, .resume_clocks = s3c244x_setup_clocks, + + .debug_io_show = s3c_cpufreq_debugfs_call(s3c2410_iotiming_debugfs), }; static int s3c2440_cpufreq_add(struct sys_device *sysdev) -- cgit v1.2.3 From 2896bda4824c1e4d34852e355916e34671e38a11 Mon Sep 17 00:00:00 2001 From: Peter Korsgaard Date: Wed, 1 Jul 2009 17:47:09 +0200 Subject: ARM: S3C6410: airgoo hmt board support Add support for the Airgoo HMT (home media terminal) device. The HMT is a tablet device with a s3c6410, a 7" LCD and a number of peripheral connections. For more details of the hardware specs, see: http://article.gmane.org/gmane.linux.debian.devel.embedded/4307 Signed-off-by: Peter Korsgaard [ben-linux@fluff.org: subject rewrite] Signed-off-by: Ben Dooks --- arch/arm/mach-s3c6410/Kconfig | 10 ++ arch/arm/mach-s3c6410/Makefile | 3 +- arch/arm/mach-s3c6410/mach-hmt.c | 276 +++++++++++++++++++++++++++++++++++++++ 3 files changed, 287 insertions(+), 2 deletions(-) create mode 100644 arch/arm/mach-s3c6410/mach-hmt.c diff --git a/arch/arm/mach-s3c6410/Kconfig b/arch/arm/mach-s3c6410/Kconfig index e63aac7f4e5..f9d0f09f976 100644 --- a/arch/arm/mach-s3c6410/Kconfig +++ b/arch/arm/mach-s3c6410/Kconfig @@ -97,3 +97,13 @@ config MACH_NCP select S3C64XX_SETUP_I2C1 help Machine support for the Samsung NCP + +config MACH_HMT + bool "Airgoo HMT" + select CPU_S3C6410 + select S3C_DEV_FB + select S3C_DEV_USB_HOST + select S3C64XX_SETUP_FB_24BPP + select HAVE_PWM + help + Machine support for the Airgoo HMT diff --git a/arch/arm/mach-s3c6410/Makefile b/arch/arm/mach-s3c6410/Makefile index 6f9deac8861..3e48c3dbf97 100644 --- a/arch/arm/mach-s3c6410/Makefile +++ b/arch/arm/mach-s3c6410/Makefile @@ -23,5 +23,4 @@ obj-$(CONFIG_S3C6410_SETUP_SDHCI) += setup-sdhci.o obj-$(CONFIG_MACH_ANW6410) += mach-anw6410.o obj-$(CONFIG_MACH_SMDK6410) += mach-smdk6410.o obj-$(CONFIG_MACH_NCP) += mach-ncp.o - - +obj-$(CONFIG_MACH_HMT) += mach-hmt.o diff --git a/arch/arm/mach-s3c6410/mach-hmt.c b/arch/arm/mach-s3c6410/mach-hmt.c new file mode 100644 index 00000000000..c5741056193 --- /dev/null +++ b/arch/arm/mach-s3c6410/mach-hmt.c @@ -0,0 +1,276 @@ +/* mach-hmt.c - Platform code for Airgoo HMT + * + * Copyright 2009 Peter Korsgaard + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * +*/ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include + +#include +#include +#include + +#include +#include + +#include +#include +#include +#include + +#include +#include +#include +#include + +#define UCON S3C2410_UCON_DEFAULT +#define ULCON (S3C2410_LCON_CS8 | S3C2410_LCON_PNONE) +#define UFCON (S3C2410_UFCON_RXTRIG8 | S3C2410_UFCON_FIFOMODE) + +static struct s3c2410_uartcfg hmt_uartcfgs[] __initdata = { + [0] = { + .hwport = 0, + .flags = 0, + .ucon = UCON, + .ulcon = ULCON, + .ufcon = UFCON, + }, + [1] = { + .hwport = 1, + .flags = 0, + .ucon = UCON, + .ulcon = ULCON, + .ufcon = UFCON, + }, + [2] = { + .hwport = 2, + .flags = 0, + .ucon = UCON, + .ulcon = ULCON, + .ufcon = UFCON, + }, +}; + +static int hmt_bl_init(struct device *dev) +{ + int ret; + + ret = gpio_request(S3C64XX_GPB(4), "lcd backlight enable"); + if (!ret) + ret = gpio_direction_output(S3C64XX_GPB(4), 0); + + return ret; +} + +static int hmt_bl_notify(int brightness) +{ + /* + * translate from CIELUV/CIELAB L*->brightness, E.G. from + * perceived luminance to light output. Assumes range 0..25600 + */ + if (brightness < 0x800) { + /* Y = Yn * L / 903.3 */ + brightness = (100*256 * brightness + 231245/2) / 231245; + } else { + /* Y = Yn * ((L + 16) / 116 )^3 */ + int t = (brightness*4 + 16*1024 + 58)/116; + brightness = 25 * ((t * t * t + 0x100000/2) / 0x100000); + } + + gpio_set_value(S3C64XX_GPB(4), brightness); + + return brightness; +} + +static void hmt_bl_exit(struct device *dev) +{ + gpio_free(S3C64XX_GPB(4)); +} + +static struct platform_pwm_backlight_data hmt_backlight_data = { + .pwm_id = 1, + .max_brightness = 100 * 256, + .dft_brightness = 40 * 256, + .pwm_period_ns = 1000000000 / (100 * 256 * 20), + .init = hmt_bl_init, + .notify = hmt_bl_notify, + .exit = hmt_bl_exit, + +}; + +static struct platform_device hmt_backlight_device = { + .name = "pwm-backlight", + .dev = { + .parent = &s3c_device_timer[1].dev, + .platform_data = &hmt_backlight_data, + }, +}; + +static struct s3c_fb_pd_win hmt_fb_win0 = { + .win_mode = { + .pixclock = 41094, + .left_margin = 8, + .right_margin = 13, + .upper_margin = 7, + .lower_margin = 5, + .hsync_len = 3, + .vsync_len = 1, + .xres = 800, + .yres = 480, + }, + .max_bpp = 32, + .default_bpp = 16, +}; + +/* 405566 clocks per frame => 60Hz refresh requires 24333960Hz clock */ +static struct s3c_fb_platdata hmt_lcd_pdata __initdata = { + .setup_gpio = s3c64xx_fb_gpio_setup_24bpp, + .win[0] = &hmt_fb_win0, + .vidcon0 = VIDCON0_VIDOUT_RGB | VIDCON0_PNRMODE_RGB, + .vidcon1 = VIDCON1_INV_HSYNC | VIDCON1_INV_VSYNC, +}; + +static struct mtd_partition hmt_nand_part[] = { + [0] = { + .name = "uboot", + .size = SZ_512K, + .offset = 0, + }, + [1] = { + .name = "uboot-env1", + .size = SZ_256K, + .offset = SZ_512K, + }, + [2] = { + .name = "uboot-env2", + .size = SZ_256K, + .offset = SZ_512K + SZ_256K, + }, + [3] = { + .name = "kernel", + .size = SZ_2M, + .offset = SZ_1M, + }, + [4] = { + .name = "rootfs", + .size = MTDPART_SIZ_FULL, + .offset = SZ_1M + SZ_2M, + }, +}; + +static struct s3c2410_nand_set hmt_nand_sets[] = { + [0] = { + .name = "nand", + .nr_chips = 1, + .nr_partitions = ARRAY_SIZE(hmt_nand_part), + .partitions = hmt_nand_part, + }, +}; + +static struct s3c2410_platform_nand hmt_nand_info = { + .tacls = 25, + .twrph0 = 55, + .twrph1 = 40, + .nr_sets = ARRAY_SIZE(hmt_nand_sets), + .sets = hmt_nand_sets, +}; + +static struct gpio_led hmt_leds[] = { + { /* left function keys */ + .name = "left:blue", + .gpio = S3C64XX_GPO(12), + .default_trigger = "default-on", + }, + { /* right function keys - red */ + .name = "right:red", + .gpio = S3C64XX_GPO(13), + }, + { /* right function keys - green */ + .name = "right:green", + .gpio = S3C64XX_GPO(14), + }, + { /* right function keys - blue */ + .name = "right:blue", + .gpio = S3C64XX_GPO(15), + .default_trigger = "default-on", + }, +}; + +static struct gpio_led_platform_data hmt_led_data = { + .num_leds = ARRAY_SIZE(hmt_leds), + .leds = hmt_leds, +}; + +static struct platform_device hmt_leds_device = { + .name = "leds-gpio", + .id = -1, + .dev.platform_data = &hmt_led_data, +}; + +static struct map_desc hmt_iodesc[] = {}; + +static struct platform_device *hmt_devices[] __initdata = { + &s3c_device_i2c0, + &s3c_device_nand, + &s3c_device_fb, + &s3c_device_usb, + &s3c_device_timer[1], + &hmt_backlight_device, + &hmt_leds_device, +}; + +static void __init hmt_map_io(void) +{ + s3c64xx_init_io(hmt_iodesc, ARRAY_SIZE(hmt_iodesc)); + s3c24xx_init_clocks(12000000); + s3c24xx_init_uarts(hmt_uartcfgs, ARRAY_SIZE(hmt_uartcfgs)); +} + +static void __init hmt_machine_init(void) +{ + s3c_i2c0_set_platdata(NULL); + s3c_fb_set_platdata(&hmt_lcd_pdata); + s3c_device_nand.dev.platform_data = &hmt_nand_info; + + gpio_request(S3C64XX_GPC(7), "usb power"); + gpio_direction_output(S3C64XX_GPC(7), 0); + gpio_request(S3C64XX_GPM(0), "usb power"); + gpio_direction_output(S3C64XX_GPM(0), 1); + gpio_request(S3C64XX_GPK(7), "usb power"); + gpio_direction_output(S3C64XX_GPK(7), 1); + gpio_request(S3C64XX_GPF(13), "usb power"); + gpio_direction_output(S3C64XX_GPF(13), 1); + + platform_add_devices(hmt_devices, ARRAY_SIZE(hmt_devices)); +} + +MACHINE_START(HMT, "Airgoo-HMT") + /* Maintainer: Peter Korsgaard */ + .phys_io = S3C_PA_UART & 0xfff00000, + .io_pg_offst = (((u32)S3C_VA_UART) >> 18) & 0xfffc, + .boot_params = S3C64XX_PA_SDRAM + 0x100, + .init_irq = s3c6410_init_irq, + .map_io = hmt_map_io, + .init_machine = hmt_machine_init, + .timer = &s3c24xx_timer, +MACHINE_END -- cgit v1.2.3 From 14077ea63b5aea1db0142c1085d24aa0d11b9d36 Mon Sep 17 00:00:00 2001 From: Peter Korsgaard Date: Wed, 1 Jul 2009 17:47:06 +0200 Subject: ARM: S3C: move s3c_device_nand from plat-s3c24xx to plat-s3c Move the s3c_device_nand platform device from plat-s3c24xx to plat-s3c, now that the nand driver also support the s3c64xx devices. Signed-off-by: Peter Korsgaard Signed-off-by: Ben Dooks --- arch/arm/mach-s3c2410/include/mach/map.h | 1 + arch/arm/mach-s3c24a0/include/mach/map.h | 1 + arch/arm/mach-s3c6400/include/mach/map.h | 2 ++ arch/arm/mach-s3c6400/s3c6400.c | 2 ++ arch/arm/mach-s3c6410/cpu.c | 2 ++ arch/arm/plat-s3c/Makefile | 1 + arch/arm/plat-s3c/dev-nand.c | 30 ++++++++++++++++++++++++++++++ arch/arm/plat-s3c24xx/devs.c | 19 ------------------- 8 files changed, 39 insertions(+), 19 deletions(-) create mode 100644 arch/arm/plat-s3c/dev-nand.c diff --git a/arch/arm/mach-s3c2410/include/mach/map.h b/arch/arm/mach-s3c2410/include/mach/map.h index e99b212cb1c..e9821850065 100644 --- a/arch/arm/mach-s3c2410/include/mach/map.h +++ b/arch/arm/mach-s3c2410/include/mach/map.h @@ -103,5 +103,6 @@ #define S3C_PA_UART S3C24XX_PA_UART #define S3C_PA_USBHOST S3C2410_PA_USBHOST #define S3C_PA_HSMMC0 S3C2443_PA_HSMMC +#define S3C_PA_NAND S3C24XX_PA_NAND #endif /* __ASM_ARCH_MAP_H */ diff --git a/arch/arm/mach-s3c24a0/include/mach/map.h b/arch/arm/mach-s3c24a0/include/mach/map.h index a01132717e3..79e4d93ea2b 100644 --- a/arch/arm/mach-s3c24a0/include/mach/map.h +++ b/arch/arm/mach-s3c24a0/include/mach/map.h @@ -81,5 +81,6 @@ #define S3C_PA_UART S3C24A0_PA_UART #define S3C_PA_IIC S3C24A0_PA_IIC +#define S3C_PA_NAND S3C24XX_PA_NAND #endif /* __ASM_ARCH_24A0_MAP_H */ diff --git a/arch/arm/mach-s3c6400/include/mach/map.h b/arch/arm/mach-s3c6400/include/mach/map.h index 5057d9948d3..fba241a7198 100644 --- a/arch/arm/mach-s3c6400/include/mach/map.h +++ b/arch/arm/mach-s3c6400/include/mach/map.h @@ -38,6 +38,7 @@ #define S3C_VA_UART2 S3C_VA_UARTx(2) #define S3C_VA_UART3 S3C_VA_UARTx(3) +#define S3C64XX_PA_NAND (0x70200000) #define S3C64XX_PA_FB (0x77100000) #define S3C64XX_PA_USB_HSOTG (0x7C000000) #define S3C64XX_PA_WATCHDOG (0x7E004000) @@ -72,6 +73,7 @@ #define S3C_PA_HSMMC2 S3C64XX_PA_HSMMC2 #define S3C_PA_IIC S3C64XX_PA_IIC0 #define S3C_PA_IIC1 S3C64XX_PA_IIC1 +#define S3C_PA_NAND S3C64XX_PA_NAND #define S3C_PA_FB S3C64XX_PA_FB #define S3C_PA_USBHOST S3C64XX_PA_USBHOST #define S3C_PA_USB_HSOTG S3C64XX_PA_USB_HSOTG diff --git a/arch/arm/mach-s3c6400/s3c6400.c b/arch/arm/mach-s3c6400/s3c6400.c index 1ece887d90b..b42bdd0f213 100644 --- a/arch/arm/mach-s3c6400/s3c6400.c +++ b/arch/arm/mach-s3c6400/s3c6400.c @@ -48,6 +48,8 @@ void __init s3c6400_map_io(void) /* the i2c devices are directly compatible with s3c2440 */ s3c_i2c0_setname("s3c2440-i2c"); + + s3c_device_nand.name = "s3c6400-nand"; } void __init s3c6400_init_clocks(int xtal) diff --git a/arch/arm/mach-s3c6410/cpu.c b/arch/arm/mach-s3c6410/cpu.c index ade904de889..9b67c663d9d 100644 --- a/arch/arm/mach-s3c6410/cpu.c +++ b/arch/arm/mach-s3c6410/cpu.c @@ -62,6 +62,8 @@ void __init s3c6410_map_io(void) /* the i2c devices are directly compatible with s3c2440 */ s3c_i2c0_setname("s3c2440-i2c"); s3c_i2c1_setname("s3c2440-i2c"); + + s3c_device_nand.name = "s3c6400-nand"; } void __init s3c6410_init_clocks(int xtal) diff --git a/arch/arm/plat-s3c/Makefile b/arch/arm/plat-s3c/Makefile index 0761766b183..d0b4a0fda5c 100644 --- a/arch/arm/plat-s3c/Makefile +++ b/arch/arm/plat-s3c/Makefile @@ -38,3 +38,4 @@ obj-$(CONFIG_SND_S3C64XX_SOC_I2S) += dev-audio.o obj-$(CONFIG_S3C_DEV_FB) += dev-fb.o obj-$(CONFIG_S3C_DEV_USB_HOST) += dev-usb.o obj-$(CONFIG_S3C_DEV_USB_HSOTG) += dev-usb-hsotg.o +obj-y += dev-nand.o diff --git a/arch/arm/plat-s3c/dev-nand.c b/arch/arm/plat-s3c/dev-nand.c new file mode 100644 index 00000000000..4e532373243 --- /dev/null +++ b/arch/arm/plat-s3c/dev-nand.c @@ -0,0 +1,30 @@ +/* + * S3C series device definition for nand device + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#include +#include + +#include +#include + +static struct resource s3c_nand_resource[] = { + [0] = { + .start = S3C_PA_NAND, + .end = S3C_PA_NAND + SZ_1M, + .flags = IORESOURCE_MEM, + } +}; + +struct platform_device s3c_device_nand = { + .name = "s3c2410-nand", + .id = -1, + .num_resources = ARRAY_SIZE(s3c_nand_resource), + .resource = s3c_nand_resource, +}; + +EXPORT_SYMBOL(s3c_device_nand); diff --git a/arch/arm/plat-s3c24xx/devs.c b/arch/arm/plat-s3c24xx/devs.c index 4eb378c89a3..20c114d6f61 100644 --- a/arch/arm/plat-s3c24xx/devs.c +++ b/arch/arm/plat-s3c24xx/devs.c @@ -180,25 +180,6 @@ void __init s3c24xx_fb_set_platdata(struct s3c2410fb_mach_info *pd) } } -/* NAND Controller */ - -static struct resource s3c_nand_resource[] = { - [0] = { - .start = S3C24XX_PA_NAND, - .end = S3C24XX_PA_NAND + S3C24XX_SZ_NAND - 1, - .flags = IORESOURCE_MEM, - } -}; - -struct platform_device s3c_device_nand = { - .name = "s3c2410-nand", - .id = -1, - .num_resources = ARRAY_SIZE(s3c_nand_resource), - .resource = s3c_nand_resource, -}; - -EXPORT_SYMBOL(s3c_device_nand); - /* USB Device (Gadget)*/ static struct resource s3c_usbgadget_resource[] = { -- cgit v1.2.3 From b5ead1cda64336b589eb4353e00f69c818fb6603 Mon Sep 17 00:00:00 2001 From: Peter Korsgaard Date: Wed, 1 Jul 2009 17:47:07 +0200 Subject: ARM: S3C: move timer/pwm handling from plat-s3c24xx to plat-s3c The s3c64xx devices use the same hardware core as s3c24xx, so move the timer/pwm handling to plat-s3c so it can be used by both. Signed-off-by: Peter Korsgaard Signed-off-by: Ben Dooks --- arch/arm/plat-s3c/Makefile | 4 + arch/arm/plat-s3c/pwm.c | 406 +++++++++++++++++++++++++++++++++++++++++ arch/arm/plat-s3c24xx/Makefile | 1 - arch/arm/plat-s3c24xx/pwm.c | 405 ---------------------------------------- 4 files changed, 410 insertions(+), 406 deletions(-) create mode 100644 arch/arm/plat-s3c/pwm.c delete mode 100644 arch/arm/plat-s3c24xx/pwm.c diff --git a/arch/arm/plat-s3c/Makefile b/arch/arm/plat-s3c/Makefile index d0b4a0fda5c..3e27720ae35 100644 --- a/arch/arm/plat-s3c/Makefile +++ b/arch/arm/plat-s3c/Makefile @@ -28,6 +28,10 @@ obj-$(CONFIG_PM) += pm.o obj-$(CONFIG_PM) += pm-gpio.o obj-$(CONFIG_S3C2410_PM_CHECK) += pm-check.o +# PWM support + +obj-$(CONFIG_HAVE_PWM) += pwm.o + # devices obj-$(CONFIG_S3C_DEV_HSMMC) += dev-hsmmc.o diff --git a/arch/arm/plat-s3c/pwm.c b/arch/arm/plat-s3c/pwm.c new file mode 100644 index 00000000000..f3d37ac5595 --- /dev/null +++ b/arch/arm/plat-s3c/pwm.c @@ -0,0 +1,406 @@ +/* arch/arm/plat-s3c/pwm.c + * + * Copyright (c) 2007 Ben Dooks + * Copyright (c) 2008 Simtec Electronics + * Ben Dooks , + * + * S3C series PWM device core + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License. +*/ + +#include +#include +#include +#include +#include +#include +#include + +#include +#include + +#include +#include + +struct pwm_device { + struct list_head list; + struct platform_device *pdev; + + struct clk *clk_div; + struct clk *clk; + const char *label; + + unsigned int period_ns; + unsigned int duty_ns; + + unsigned char tcon_base; + unsigned char running; + unsigned char use_count; + unsigned char pwm_id; +}; + +#define pwm_dbg(_pwm, msg...) dev_dbg(&(_pwm)->pdev->dev, msg) + +static struct clk *clk_scaler[2]; + +/* Standard setup for a timer block. */ + +#define TIMER_RESOURCE_SIZE (1) + +#define TIMER_RESOURCE(_tmr, _irq) \ + (struct resource [TIMER_RESOURCE_SIZE]) { \ + [0] = { \ + .start = _irq, \ + .end = _irq, \ + .flags = IORESOURCE_IRQ \ + } \ + } + +#define DEFINE_S3C_TIMER(_tmr_no, _irq) \ + .name = "s3c24xx-pwm", \ + .id = _tmr_no, \ + .num_resources = TIMER_RESOURCE_SIZE, \ + .resource = TIMER_RESOURCE(_tmr_no, _irq), \ + +/* since we already have an static mapping for the timer, we do not + * bother setting any IO resource for the base. + */ + +struct platform_device s3c_device_timer[] = { + [0] = { DEFINE_S3C_TIMER(0, IRQ_TIMER0) }, + [1] = { DEFINE_S3C_TIMER(1, IRQ_TIMER1) }, + [2] = { DEFINE_S3C_TIMER(2, IRQ_TIMER2) }, + [3] = { DEFINE_S3C_TIMER(3, IRQ_TIMER3) }, + [4] = { DEFINE_S3C_TIMER(4, IRQ_TIMER4) }, +}; + +static inline int pwm_is_tdiv(struct pwm_device *pwm) +{ + return clk_get_parent(pwm->clk) == pwm->clk_div; +} + +static DEFINE_MUTEX(pwm_lock); +static LIST_HEAD(pwm_list); + +struct pwm_device *pwm_request(int pwm_id, const char *label) +{ + struct pwm_device *pwm; + int found = 0; + + mutex_lock(&pwm_lock); + + list_for_each_entry(pwm, &pwm_list, list) { + if (pwm->pwm_id == pwm_id) { + found = 1; + break; + } + } + + if (found) { + if (pwm->use_count == 0) { + pwm->use_count = 1; + pwm->label = label; + } else + pwm = ERR_PTR(-EBUSY); + } else + pwm = ERR_PTR(-ENOENT); + + mutex_unlock(&pwm_lock); + return pwm; +} + +EXPORT_SYMBOL(pwm_request); + + +void pwm_free(struct pwm_device *pwm) +{ + mutex_lock(&pwm_lock); + + if (pwm->use_count) { + pwm->use_count--; + pwm->label = NULL; + } else + printk(KERN_ERR "PWM%d device already freed\n", pwm->pwm_id); + + mutex_unlock(&pwm_lock); +} + +EXPORT_SYMBOL(pwm_free); + +#define pwm_tcon_start(pwm) (1 << (pwm->tcon_base + 0)) +#define pwm_tcon_invert(pwm) (1 << (pwm->tcon_base + 2)) +#define pwm_tcon_autoreload(pwm) (1 << (pwm->tcon_base + 3)) +#define pwm_tcon_manulupdate(pwm) (1 << (pwm->tcon_base + 1)) + +int pwm_enable(struct pwm_device *pwm) +{ + unsigned long flags; + unsigned long tcon; + + local_irq_save(flags); + + tcon = __raw_readl(S3C2410_TCON); + tcon |= pwm_tcon_start(pwm); + __raw_writel(tcon, S3C2410_TCON); + + local_irq_restore(flags); + + pwm->running = 1; + return 0; +} + +EXPORT_SYMBOL(pwm_enable); + +void pwm_disable(struct pwm_device *pwm) +{ + unsigned long flags; + unsigned long tcon; + + local_irq_save(flags); + + tcon = __raw_readl(S3C2410_TCON); + tcon &= ~pwm_tcon_start(pwm); + __raw_writel(tcon, S3C2410_TCON); + + local_irq_restore(flags); + + pwm->running = 0; +} + +EXPORT_SYMBOL(pwm_disable); + +static unsigned long pwm_calc_tin(struct pwm_device *pwm, unsigned long freq) +{ + unsigned long tin_parent_rate; + unsigned int div; + + tin_parent_rate = clk_get_rate(clk_get_parent(pwm->clk_div)); + pwm_dbg(pwm, "tin parent at %lu\n", tin_parent_rate); + + for (div = 2; div <= 16; div *= 2) { + if ((tin_parent_rate / (div << 16)) < freq) + return tin_parent_rate / div; + } + + return tin_parent_rate / 16; +} + +#define NS_IN_HZ (1000000000UL) + +int pwm_config(struct pwm_device *pwm, int duty_ns, int period_ns) +{ + unsigned long tin_rate; + unsigned long tin_ns; + unsigned long period; + unsigned long flags; + unsigned long tcon; + unsigned long tcnt; + long tcmp; + + /* We currently avoid using 64bit arithmetic by using the + * fact that anything faster than 1Hz is easily representable + * by 32bits. */ + + if (period_ns > NS_IN_HZ || duty_ns > NS_IN_HZ) + return -ERANGE; + + if (duty_ns > period_ns) + return -EINVAL; + + if (period_ns == pwm->period_ns && + duty_ns == pwm->duty_ns) + return 0; + + /* The TCMP and TCNT can be read without a lock, they're not + * shared between the timers. */ + + tcmp = __raw_readl(S3C2410_TCMPB(pwm->pwm_id)); + tcnt = __raw_readl(S3C2410_TCNTB(pwm->pwm_id)); + + period = NS_IN_HZ / period_ns; + + pwm_dbg(pwm, "duty_ns=%d, period_ns=%d (%lu)\n", + duty_ns, period_ns, period); + + /* Check to see if we are changing the clock rate of the PWM */ + + if (pwm->period_ns != period_ns) { + if (pwm_is_tdiv(pwm)) { + tin_rate = pwm_calc_tin(pwm, period); + clk_set_rate(pwm->clk_div, tin_rate); + } else + tin_rate = clk_get_rate(pwm->clk); + + pwm->period_ns = period_ns; + + pwm_dbg(pwm, "tin_rate=%lu\n", tin_rate); + + tin_ns = NS_IN_HZ / tin_rate; + tcnt = period_ns / tin_ns; + } else + tin_ns = NS_IN_HZ / clk_get_rate(pwm->clk); + + /* Note, counters count down */ + + tcmp = duty_ns / tin_ns; + tcmp = tcnt - tcmp; + + pwm_dbg(pwm, "tin_ns=%lu, tcmp=%ld/%lu\n", tin_ns, tcmp, tcnt); + + if (tcmp < 0) + tcmp = 0; + + /* Update the PWM register block. */ + + local_irq_save(flags); + + __raw_writel(tcmp, S3C2410_TCMPB(pwm->pwm_id)); + __raw_writel(tcnt, S3C2410_TCNTB(pwm->pwm_id)); + + tcon = __raw_readl(S3C2410_TCON); + tcon |= pwm_tcon_manulupdate(pwm); + tcon |= pwm_tcon_autoreload(pwm); + __raw_writel(tcon, S3C2410_TCON); + + tcon &= ~pwm_tcon_manulupdate(pwm); + __raw_writel(tcon, S3C2410_TCON); + + local_irq_restore(flags); + + return 0; +} + +EXPORT_SYMBOL(pwm_config); + +static int pwm_register(struct pwm_device *pwm) +{ + pwm->duty_ns = -1; + pwm->period_ns = -1; + + mutex_lock(&pwm_lock); + list_add_tail(&pwm->list, &pwm_list); + mutex_unlock(&pwm_lock); + + return 0; +} + +static int s3c_pwm_probe(struct platform_device *pdev) +{ + struct device *dev = &pdev->dev; + struct pwm_device *pwm; + unsigned long flags; + unsigned long tcon; + unsigned int id = pdev->id; + int ret; + + if (id == 4) { + dev_err(dev, "TIMER4 is currently not supported\n"); + return -ENXIO; + } + + pwm = kzalloc(sizeof(struct pwm_device), GFP_KERNEL); + if (pwm == NULL) { + dev_err(dev, "failed to allocate pwm_device\n"); + return -ENOMEM; + } + + pwm->pdev = pdev; + pwm->pwm_id = id; + + /* calculate base of control bits in TCON */ + pwm->tcon_base = id == 0 ? 0 : (id * 4) + 4; + + pwm->clk = clk_get(dev, "pwm-tin"); + if (IS_ERR(pwm->clk)) { + dev_err(dev, "failed to get pwm tin clk\n"); + ret = PTR_ERR(pwm->clk); + goto err_alloc; + } + + pwm->clk_div = clk_get(dev, "pwm-tdiv"); + if (IS_ERR(pwm->clk_div)) { + dev_err(dev, "failed to get pwm tdiv clk\n"); + ret = PTR_ERR(pwm->clk_div); + goto err_clk_tin; + } + + local_irq_save(flags); + + tcon = __raw_readl(S3C2410_TCON); + tcon |= pwm_tcon_invert(pwm); + __raw_writel(tcon, S3C2410_TCON); + + local_irq_restore(flags); + + + ret = pwm_register(pwm); + if (ret) { + dev_err(dev, "failed to register pwm\n"); + goto err_clk_tdiv; + } + + pwm_dbg(pwm, "config bits %02x\n", + (__raw_readl(S3C2410_TCON) >> pwm->tcon_base) & 0x0f); + + dev_info(dev, "tin at %lu, tdiv at %lu, tin=%sclk, base %d\n", + clk_get_rate(pwm->clk), + clk_get_rate(pwm->clk_div), + pwm_is_tdiv(pwm) ? "div" : "ext", pwm->tcon_base); + + platform_set_drvdata(pdev, pwm); + return 0; + + err_clk_tdiv: + clk_put(pwm->clk_div); + + err_clk_tin: + clk_put(pwm->clk); + + err_alloc: + kfree(pwm); + return ret; +} + +static int s3c_pwm_remove(struct platform_device *pdev) +{ + struct pwm_device *pwm = platform_get_drvdata(pdev); + + clk_put(pwm->clk_div); + clk_put(pwm->clk); + kfree(pwm); + + return 0; +} + +static struct platform_driver s3c_pwm_driver = { + .driver = { + .name = "s3c24xx-pwm", + .owner = THIS_MODULE, + }, + .probe = s3c_pwm_probe, + .remove = __devexit_p(s3c_pwm_remove), +}; + +static int __init pwm_init(void) +{ + int ret; + + clk_scaler[0] = clk_get(NULL, "pwm-scaler0"); + clk_scaler[1] = clk_get(NULL, "pwm-scaler1"); + + if (IS_ERR(clk_scaler[0]) || IS_ERR(clk_scaler[1])) { + printk(KERN_ERR "%s: failed to get scaler clocks\n", __func__); + return -EINVAL; + } + + ret = platform_driver_register(&s3c_pwm_driver); + if (ret) + printk(KERN_ERR "%s: failed to add pwm driver\n", __func__); + + return ret; +} + +arch_initcall(pwm_init); diff --git a/arch/arm/plat-s3c24xx/Makefile b/arch/arm/plat-s3c24xx/Makefile index 579a165c282..0807831c992 100644 --- a/arch/arm/plat-s3c24xx/Makefile +++ b/arch/arm/plat-s3c24xx/Makefile @@ -29,7 +29,6 @@ obj-$(CONFIG_PM_SIMTEC) += pm-simtec.o obj-$(CONFIG_PM) += pm.o obj-$(CONFIG_PM) += irq-pm.o obj-$(CONFIG_PM) += sleep.o -obj-$(CONFIG_S3C24XX_PWM) += pwm.o obj-$(CONFIG_S3C2410_CLOCK) += s3c2410-clock.o obj-$(CONFIG_S3C2410_DMA) += dma.o obj-$(CONFIG_S3C24XX_ADC) += adc.o diff --git a/arch/arm/plat-s3c24xx/pwm.c b/arch/arm/plat-s3c24xx/pwm.c deleted file mode 100644 index 0120b760315..00000000000 --- a/arch/arm/plat-s3c24xx/pwm.c +++ /dev/null @@ -1,405 +0,0 @@ -/* arch/arm/plat-s3c24xx/pwm.c - * - * Copyright (c) 2007 Ben Dooks - * Copyright (c) 2008 Simtec Electronics - * Ben Dooks , - * - * S3C24XX PWM device core - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License. -*/ - -#include -#include -#include -#include -#include -#include -#include - -#include - -#include -#include - -struct pwm_device { - struct list_head list; - struct platform_device *pdev; - - struct clk *clk_div; - struct clk *clk; - const char *label; - - unsigned int period_ns; - unsigned int duty_ns; - - unsigned char tcon_base; - unsigned char running; - unsigned char use_count; - unsigned char pwm_id; -}; - -#define pwm_dbg(_pwm, msg...) dev_dbg(&(_pwm)->pdev->dev, msg) - -static struct clk *clk_scaler[2]; - -/* Standard setup for a timer block. */ - -#define TIMER_RESOURCE_SIZE (1) - -#define TIMER_RESOURCE(_tmr, _irq) \ - (struct resource [TIMER_RESOURCE_SIZE]) { \ - [0] = { \ - .start = _irq, \ - .end = _irq, \ - .flags = IORESOURCE_IRQ \ - } \ - } - -#define DEFINE_S3C_TIMER(_tmr_no, _irq) \ - .name = "s3c24xx-pwm", \ - .id = _tmr_no, \ - .num_resources = TIMER_RESOURCE_SIZE, \ - .resource = TIMER_RESOURCE(_tmr_no, _irq), \ - -/* since we already have an static mapping for the timer, we do not - * bother setting any IO resource for the base. - */ - -struct platform_device s3c_device_timer[] = { - [0] = { DEFINE_S3C_TIMER(0, IRQ_TIMER0) }, - [1] = { DEFINE_S3C_TIMER(1, IRQ_TIMER1) }, - [2] = { DEFINE_S3C_TIMER(2, IRQ_TIMER2) }, - [3] = { DEFINE_S3C_TIMER(3, IRQ_TIMER3) }, - [4] = { DEFINE_S3C_TIMER(4, IRQ_TIMER4) }, -}; - -static inline int pwm_is_tdiv(struct pwm_device *pwm) -{ - return clk_get_parent(pwm->clk) == pwm->clk_div; -} - -static DEFINE_MUTEX(pwm_lock); -static LIST_HEAD(pwm_list); - -struct pwm_device *pwm_request(int pwm_id, const char *label) -{ - struct pwm_device *pwm; - int found = 0; - - mutex_lock(&pwm_lock); - - list_for_each_entry(pwm, &pwm_list, list) { - if (pwm->pwm_id == pwm_id) { - found = 1; - break; - } - } - - if (found) { - if (pwm->use_count == 0) { - pwm->use_count = 1; - pwm->label = label; - } else - pwm = ERR_PTR(-EBUSY); - } else - pwm = ERR_PTR(-ENOENT); - - mutex_unlock(&pwm_lock); - return pwm; -} - -EXPORT_SYMBOL(pwm_request); - - -void pwm_free(struct pwm_device *pwm) -{ - mutex_lock(&pwm_lock); - - if (pwm->use_count) { - pwm->use_count--; - pwm->label = NULL; - } else - printk(KERN_ERR "PWM%d device already freed\n", pwm->pwm_id); - - mutex_unlock(&pwm_lock); -} - -EXPORT_SYMBOL(pwm_free); - -#define pwm_tcon_start(pwm) (1 << (pwm->tcon_base + 0)) -#define pwm_tcon_invert(pwm) (1 << (pwm->tcon_base + 2)) -#define pwm_tcon_autoreload(pwm) (1 << (pwm->tcon_base + 3)) -#define pwm_tcon_manulupdate(pwm) (1 << (pwm->tcon_base + 1)) - -int pwm_enable(struct pwm_device *pwm) -{ - unsigned long flags; - unsigned long tcon; - - local_irq_save(flags); - - tcon = __raw_readl(S3C2410_TCON); - tcon |= pwm_tcon_start(pwm); - __raw_writel(tcon, S3C2410_TCON); - - local_irq_restore(flags); - - pwm->running = 1; - return 0; -} - -EXPORT_SYMBOL(pwm_enable); - -void pwm_disable(struct pwm_device *pwm) -{ - unsigned long flags; - unsigned long tcon; - - local_irq_save(flags); - - tcon = __raw_readl(S3C2410_TCON); - tcon &= ~pwm_tcon_start(pwm); - __raw_writel(tcon, S3C2410_TCON); - - local_irq_restore(flags); - - pwm->running = 0; -} - -EXPORT_SYMBOL(pwm_disable); - -static unsigned long pwm_calc_tin(struct pwm_device *pwm, unsigned long freq) -{ - unsigned long tin_parent_rate; - unsigned int div; - - tin_parent_rate = clk_get_rate(clk_get_parent(pwm->clk_div)); - pwm_dbg(pwm, "tin parent at %lu\n", tin_parent_rate); - - for (div = 2; div <= 16; div *= 2) { - if ((tin_parent_rate / (div << 16)) < freq) - return tin_parent_rate / div; - } - - return tin_parent_rate / 16; -} - -#define NS_IN_HZ (1000000000UL) - -int pwm_config(struct pwm_device *pwm, int duty_ns, int period_ns) -{ - unsigned long tin_rate; - unsigned long tin_ns; - unsigned long period; - unsigned long flags; - unsigned long tcon; - unsigned long tcnt; - long tcmp; - - /* We currently avoid using 64bit arithmetic by using the - * fact that anything faster than 1Hz is easily representable - * by 32bits. */ - - if (period_ns > NS_IN_HZ || duty_ns > NS_IN_HZ) - return -ERANGE; - - if (duty_ns > period_ns) - return -EINVAL; - - if (period_ns == pwm->period_ns && - duty_ns == pwm->duty_ns) - return 0; - - /* The TCMP and TCNT can be read without a lock, they're not - * shared between the timers. */ - - tcmp = __raw_readl(S3C2410_TCMPB(pwm->pwm_id)); - tcnt = __raw_readl(S3C2410_TCNTB(pwm->pwm_id)); - - period = NS_IN_HZ / period_ns; - - pwm_dbg(pwm, "duty_ns=%d, period_ns=%d (%lu)\n", - duty_ns, period_ns, period); - - /* Check to see if we are changing the clock rate of the PWM */ - - if (pwm->period_ns != period_ns) { - if (pwm_is_tdiv(pwm)) { - tin_rate = pwm_calc_tin(pwm, period); - clk_set_rate(pwm->clk_div, tin_rate); - } else - tin_rate = clk_get_rate(pwm->clk); - - pwm->period_ns = period_ns; - - pwm_dbg(pwm, "tin_rate=%lu\n", tin_rate); - - tin_ns = NS_IN_HZ / tin_rate; - tcnt = period_ns / tin_ns; - } else - tin_ns = NS_IN_HZ / clk_get_rate(pwm->clk); - - /* Note, counters count down */ - - tcmp = duty_ns / tin_ns; - tcmp = tcnt - tcmp; - - pwm_dbg(pwm, "tin_ns=%lu, tcmp=%ld/%lu\n", tin_ns, tcmp, tcnt); - - if (tcmp < 0) - tcmp = 0; - - /* Update the PWM register block. */ - - local_irq_save(flags); - - __raw_writel(tcmp, S3C2410_TCMPB(pwm->pwm_id)); - __raw_writel(tcnt, S3C2410_TCNTB(pwm->pwm_id)); - - tcon = __raw_readl(S3C2410_TCON); - tcon |= pwm_tcon_manulupdate(pwm); - tcon |= pwm_tcon_autoreload(pwm); - __raw_writel(tcon, S3C2410_TCON); - - tcon &= ~pwm_tcon_manulupdate(pwm); - __raw_writel(tcon, S3C2410_TCON); - - local_irq_restore(flags); - - return 0; -} - -EXPORT_SYMBOL(pwm_config); - -static int pwm_register(struct pwm_device *pwm) -{ - pwm->duty_ns = -1; - pwm->period_ns = -1; - - mutex_lock(&pwm_lock); - list_add_tail(&pwm->list, &pwm_list); - mutex_unlock(&pwm_lock); - - return 0; -} - -static int s3c_pwm_probe(struct platform_device *pdev) -{ - struct device *dev = &pdev->dev; - struct pwm_device *pwm; - unsigned long flags; - unsigned long tcon; - unsigned int id = pdev->id; - int ret; - - if (id == 4) { - dev_err(dev, "TIMER4 is currently not supported\n"); - return -ENXIO; - } - - pwm = kzalloc(sizeof(struct pwm_device), GFP_KERNEL); - if (pwm == NULL) { - dev_err(dev, "failed to allocate pwm_device\n"); - return -ENOMEM; - } - - pwm->pdev = pdev; - pwm->pwm_id = id; - - /* calculate base of control bits in TCON */ - pwm->tcon_base = id == 0 ? 0 : (id * 4) + 4; - - pwm->clk = clk_get(dev, "pwm-tin"); - if (IS_ERR(pwm->clk)) { - dev_err(dev, "failed to get pwm tin clk\n"); - ret = PTR_ERR(pwm->clk); - goto err_alloc; - } - - pwm->clk_div = clk_get(dev, "pwm-tdiv"); - if (IS_ERR(pwm->clk_div)) { - dev_err(dev, "failed to get pwm tdiv clk\n"); - ret = PTR_ERR(pwm->clk_div); - goto err_clk_tin; - } - - local_irq_save(flags); - - tcon = __raw_readl(S3C2410_TCON); - tcon |= pwm_tcon_invert(pwm); - __raw_writel(tcon, S3C2410_TCON); - - local_irq_restore(flags); - - - ret = pwm_register(pwm); - if (ret) { - dev_err(dev, "failed to register pwm\n"); - goto err_clk_tdiv; - } - - pwm_dbg(pwm, "config bits %02x\n", - (__raw_readl(S3C2410_TCON) >> pwm->tcon_base) & 0x0f); - - dev_info(dev, "tin at %lu, tdiv at %lu, tin=%sclk, base %d\n", - clk_get_rate(pwm->clk), - clk_get_rate(pwm->clk_div), - pwm_is_tdiv(pwm) ? "div" : "ext", pwm->tcon_base); - - platform_set_drvdata(pdev, pwm); - return 0; - - err_clk_tdiv: - clk_put(pwm->clk_div); - - err_clk_tin: - clk_put(pwm->clk); - - err_alloc: - kfree(pwm); - return ret; -} - -static int s3c_pwm_remove(struct platform_device *pdev) -{ - struct pwm_device *pwm = platform_get_drvdata(pdev); - - clk_put(pwm->clk_div); - clk_put(pwm->clk); - kfree(pwm); - - return 0; -} - -static struct platform_driver s3c_pwm_driver = { - .driver = { - .name = "s3c24xx-pwm", - .owner = THIS_MODULE, - }, - .probe = s3c_pwm_probe, - .remove = __devexit_p(s3c_pwm_remove), -}; - -static int __init pwm_init(void) -{ - int ret; - - clk_scaler[0] = clk_get(NULL, "pwm-scaler0"); - clk_scaler[1] = clk_get(NULL, "pwm-scaler1"); - - if (IS_ERR(clk_scaler[0]) || IS_ERR(clk_scaler[1])) { - printk(KERN_ERR "%s: failed to get scaler clocks\n", __func__); - return -EINVAL; - } - - ret = platform_driver_register(&s3c_pwm_driver); - if (ret) - printk(KERN_ERR "%s: failed to add pwm driver\n", __func__); - - return ret; -} - -arch_initcall(pwm_init); -- cgit v1.2.3 From 90a09c9cf78344d18e2438c3b87363b949629fa3 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Thu, 30 Jul 2009 16:40:37 -0700 Subject: Alan doesn't want to maintain tty code any more Not that anybody can blame him. It's a morass. But hey, it's way better than it _used_ to be, though, so thanks for all the fish. Signed-off-by: Linus Torvalds --- MAINTAINERS | 7 ++----- 1 file changed, 2 insertions(+), 5 deletions(-) diff --git a/MAINTAINERS b/MAINTAINERS index 66a3865da88..79471ba4981 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -155,10 +155,9 @@ S: Maintained F: drivers/net/r8169.c 8250/16?50 (AND CLONE UARTS) SERIAL DRIVER -M: Alan Cox L: linux-serial@vger.kernel.org W: http://serial.sourceforge.net -S: Odd Fixes +S: Orphan F: drivers/serial/8250* F: include/linux/serial_8250.h @@ -4997,9 +4996,7 @@ T: git git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial.git S: Maintained TTY LAYER -M: Alan Cox -S: Maintained -T: stgit http://zeniv.linux.org.uk/~alan/ttydev/ +S: Orphan F: drivers/char/tty_* F: drivers/serial/serial_core.c F: include/linux/serial_core.h -- cgit v1.2.3 From ec30c5f3a18722f8fcf8c83146a10b03ac4d9ff1 Mon Sep 17 00:00:00 2001 From: Masami Hiramatsu Date: Tue, 28 Jul 2009 19:47:23 -0400 Subject: kprobes: Use kernel_text_address() for checking probe address Use kernel_text_address() for checking probe address instead of __kernel_text_address(), because __kernel_text_address() returns true for init functions even after relaseing those functions. That will hit a BUG() in text_poke(). Signed-off-by: Masami Hiramatsu Cc: Ananth N Mavinakayanahalli Cc: Jim Keniston Signed-off-by: Linus Torvalds --- kernel/kprobes.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/kernel/kprobes.c b/kernel/kprobes.c index 16b5739c516..0540948e29a 100644 --- a/kernel/kprobes.c +++ b/kernel/kprobes.c @@ -694,7 +694,7 @@ int __kprobes register_kprobe(struct kprobe *p) p->addr = addr; preempt_disable(); - if (!__kernel_text_address((unsigned long) p->addr) || + if (!kernel_text_address((unsigned long) p->addr) || in_kprobes_functions((unsigned long) p->addr)) { preempt_enable(); return -EINVAL; -- cgit v1.2.3 From 97db39a1f6f69e906e98118392400de5217aa33a Mon Sep 17 00:00:00 2001 From: Eric Sandeen Date: Sun, 26 Jul 2009 21:52:01 -0500 Subject: xfs: reduce bmv_count in xfs_vn_fiemap commit 6321e3ed2acf3ee9643cdd403e1c88605d7944ba caused the full bmv_count's worth of getbmapx structures to get allocated; telling it to do MAXEXTNUM was a bit insane, resulting in ENOMEM every time. Chop it down to something reasonable, the number of slots in the caller's input buffer. If this is too large the caller may get ENOMEM but the reason should not be a mystery, and they can try again with something smaller. We add 1 to the value because in the normal getbmap world, bmv_count includes the header and xfs_getbmap does: nex = bmv->bmv_count - 1; if (nex <= 0) return XFS_ERROR(EINVAL); Signed-off-by: Eric Sandeen Reviewed-by: Olaf Weber Reviewed-by: Christoph Hellwig Signed-off-by: Felix Blyakher --- fs/xfs/linux-2.6/xfs_iops.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/fs/xfs/linux-2.6/xfs_iops.c b/fs/xfs/linux-2.6/xfs_iops.c index 58973bb4603..8070b34cc28 100644 --- a/fs/xfs/linux-2.6/xfs_iops.c +++ b/fs/xfs/linux-2.6/xfs_iops.c @@ -680,8 +680,8 @@ xfs_vn_fiemap( else bm.bmv_length = BTOBB(length); - /* our formatter will tell xfs_getbmap when to stop. */ - bm.bmv_count = MAXEXTNUM; + /* We add one because in getbmap world count includes the header */ + bm.bmv_count = fieinfo->fi_extents_max + 1; bm.bmv_iflags = BMV_IF_PREALLOC; if (fieinfo->fi_flags & FIEMAP_FLAG_XATTR) bm.bmv_iflags |= BMV_IF_ATTRFORK; -- cgit v1.2.3 From c8a4051c3731b6db224482218cfd535ab9393ff8 Mon Sep 17 00:00:00 2001 From: Eric Sandeen Date: Fri, 31 Jul 2009 00:02:17 -0500 Subject: xfs: bump up nr_to_write in xfs_vm_writepage VM calculation for nr_to_write seems off. Bump it way up, this gets simple streaming writes zippy again. To be reviewed again after Jens' writeback changes. Signed-off-by: Christoph Hellwig Signed-off-by: Eric Sandeen Cc: Chris Mason Reviewed-by: Felix Blyakher Signed-off-by: Felix Blyakher --- fs/xfs/linux-2.6/xfs_aops.c | 8 ++++++++ 1 file changed, 8 insertions(+) diff --git a/fs/xfs/linux-2.6/xfs_aops.c b/fs/xfs/linux-2.6/xfs_aops.c index 7ec89fc05b2..aecf2519db7 100644 --- a/fs/xfs/linux-2.6/xfs_aops.c +++ b/fs/xfs/linux-2.6/xfs_aops.c @@ -1268,6 +1268,14 @@ xfs_vm_writepage( if (!page_has_buffers(page)) create_empty_buffers(page, 1 << inode->i_blkbits, 0); + + /* + * VM calculation for nr_to_write seems off. Bump it way + * up, this gets simple streaming writes zippy again. + * To be reviewed again after Jens' writeback changes. + */ + wbc->nr_to_write *= 4; + /* * Convert delayed allocate, unwritten or unmapped space * to real space and flush out to disk. -- cgit v1.2.3 From cbb4f2646d77b536ed2b1500ef6641083228ed8f Mon Sep 17 00:00:00 2001 From: Li Zefan Date: Fri, 31 Jul 2009 08:55:48 +0200 Subject: io context: fix ref counting Commit d9c7d394a8ebacb60097b192939ae9f15235225e ("block: prevent possible io_context->refcount overflow") mistakenly changed atomic_inc(&ioc->nr_tasks) to atomic_long_inc(&ioc->refcount). Signed-off-by: Li Zefan Acked-by: Nikanth Karthikesan Signed-off-by: Jens Axboe --- include/linux/iocontext.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/include/linux/iocontext.h b/include/linux/iocontext.h index dd05434fa45..4da4a75c3f1 100644 --- a/include/linux/iocontext.h +++ b/include/linux/iocontext.h @@ -92,7 +92,7 @@ static inline struct io_context *ioc_task_link(struct io_context *ioc) * a race). */ if (ioc && atomic_long_inc_not_zero(&ioc->refcount)) { - atomic_long_inc(&ioc->refcount); + atomic_inc(&ioc->nr_tasks); return ioc; } -- cgit v1.2.3 From aa563af763373a7e67a7b8fdb427d2a2fcbeab3b Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Fri, 31 Jul 2009 10:05:11 +0200 Subject: ALSA: hda - Increase PCM stream name buf in patch_realtek.c The name buf with size 16 is too short for some codec names, e.g. truncated like "ALC861-VD Analo". Now the size is doubled. Signed-off-by: Takashi Iwai --- sound/pci/hda/patch_realtek.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c index 8c8b273116f..b95df5d5dcc 100644 --- a/sound/pci/hda/patch_realtek.c +++ b/sound/pci/hda/patch_realtek.c @@ -275,13 +275,13 @@ struct alc_spec { */ unsigned int num_init_verbs; - char stream_name_analog[16]; /* analog PCM stream */ + char stream_name_analog[32]; /* analog PCM stream */ struct hda_pcm_stream *stream_analog_playback; struct hda_pcm_stream *stream_analog_capture; struct hda_pcm_stream *stream_analog_alt_playback; struct hda_pcm_stream *stream_analog_alt_capture; - char stream_name_digital[16]; /* digital PCM stream */ + char stream_name_digital[32]; /* digital PCM stream */ struct hda_pcm_stream *stream_digital_playback; struct hda_pcm_stream *stream_digital_capture; -- cgit v1.2.3 From f065fabc864f4c98857bf67caa2365e9f8545751 Mon Sep 17 00:00:00 2001 From: Julia Lawall Date: Fri, 31 Jul 2009 08:32:03 +0200 Subject: ALSA: sound/aoa: Add kmalloc NULL tests Check that the result of kzalloc is not NULL before a dereference. The semantic match that finds this problem is as follows: (http://www.emn.fr/x-info/coccinelle/) // @@ expression *x; identifier f; constant char *C; @@ x = \(kmalloc\|kcalloc\|kzalloc\)(...); ... when != x == NULL when != x != NULL when != (x || ...) ( kfree(x) | f(...,C,...,x,...) | *f(...,x,...) | *x->f ) // Signed-off-by: Julia Lawall Signed-off-by: Takashi Iwai --- sound/aoa/core/gpio-pmf.c | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/sound/aoa/core/gpio-pmf.c b/sound/aoa/core/gpio-pmf.c index 5ca2220eac7..1dd0c28d1fb 100644 --- a/sound/aoa/core/gpio-pmf.c +++ b/sound/aoa/core/gpio-pmf.c @@ -182,6 +182,10 @@ static int pmf_set_notify(struct gpio_runtime *rt, if (!old && notify) { irq_client = kzalloc(sizeof(struct pmf_irq_client), GFP_KERNEL); + if (!irq_client) { + err = -ENOMEM; + goto out_unlock; + } irq_client->data = notif; irq_client->handler = pmf_handle_notify_irq; irq_client->owner = THIS_MODULE; -- cgit v1.2.3 From 6de7e356faf54aa75de5b624bbce28a5b776dfa8 Mon Sep 17 00:00:00 2001 From: Sebastian Andrzej Siewior Date: Thu, 18 Jun 2009 10:19:12 +0200 Subject: lib/scatterlist: add a flags to signalize mapping direction sg_miter_start() is currently unaware of the direction of the copy process (to or from the scatter list). It is important to know the direction because the page has to be flushed in case the data written is seen on a different mapping in user land on cache incoherent architectures. Signed-off-by: Sebastian Andrzej Siewior Acked-by: FUJITA Tomonori Acked-by: Tejun Heo Signed-off-by: Pierre Ossman --- include/linux/scatterlist.h | 2 ++ lib/scatterlist.c | 16 ++++++++++++---- 2 files changed, 14 insertions(+), 4 deletions(-) diff --git a/include/linux/scatterlist.h b/include/linux/scatterlist.h index e5996984ddd..9aaf5bfdad1 100644 --- a/include/linux/scatterlist.h +++ b/include/linux/scatterlist.h @@ -242,6 +242,8 @@ size_t sg_copy_to_buffer(struct scatterlist *sgl, unsigned int nents, */ #define SG_MITER_ATOMIC (1 << 0) /* use kmap_atomic */ +#define SG_MITER_TO_SG (1 << 1) /* flush back to phys on unmap */ +#define SG_MITER_FROM_SG (1 << 2) /* nop */ struct sg_mapping_iter { /* the following three fields can be accessed directly */ diff --git a/lib/scatterlist.c b/lib/scatterlist.c index a295e404e90..0d475d8167b 100644 --- a/lib/scatterlist.c +++ b/lib/scatterlist.c @@ -314,6 +314,7 @@ void sg_miter_start(struct sg_mapping_iter *miter, struct scatterlist *sgl, miter->__sg = sgl; miter->__nents = nents; miter->__offset = 0; + WARN_ON(!(flags & (SG_MITER_TO_SG | SG_MITER_FROM_SG))); miter->__flags = flags; } EXPORT_SYMBOL(sg_miter_start); @@ -394,6 +395,9 @@ void sg_miter_stop(struct sg_mapping_iter *miter) if (miter->addr) { miter->__offset += miter->consumed; + if (miter->__flags & SG_MITER_TO_SG) + flush_kernel_dcache_page(miter->page); + if (miter->__flags & SG_MITER_ATOMIC) { WARN_ON(!irqs_disabled()); kunmap_atomic(miter->addr, KM_BIO_SRC_IRQ); @@ -426,8 +430,14 @@ static size_t sg_copy_buffer(struct scatterlist *sgl, unsigned int nents, unsigned int offset = 0; struct sg_mapping_iter miter; unsigned long flags; + unsigned int sg_flags = SG_MITER_ATOMIC; + + if (to_buffer) + sg_flags |= SG_MITER_FROM_SG; + else + sg_flags |= SG_MITER_TO_SG; - sg_miter_start(&miter, sgl, nents, SG_MITER_ATOMIC); + sg_miter_start(&miter, sgl, nents, sg_flags); local_irq_save(flags); @@ -438,10 +448,8 @@ static size_t sg_copy_buffer(struct scatterlist *sgl, unsigned int nents, if (to_buffer) memcpy(buf + offset, miter.addr, len); - else { + else memcpy(miter.addr, buf + offset, len); - flush_kernel_dcache_page(miter.page); - } offset += len; } -- cgit v1.2.3 From da60a91d012bcb10bc5bcd86d585c4281742832c Mon Sep 17 00:00:00 2001 From: Sebastian Andrzej Siewior Date: Thu, 18 Jun 2009 09:33:32 +0200 Subject: sdhci: use SG_MITER_TO_SG/SG_MITER_FROM_SG so the page will be flushed on unmap on ARCH which need it. Signed-off-by: Sebastian Andrzej Siewior Signed-off-by: Pierre Ossman --- drivers/mmc/host/sdhci.c | 10 ++++++++-- 1 file changed, 8 insertions(+), 2 deletions(-) diff --git a/drivers/mmc/host/sdhci.c b/drivers/mmc/host/sdhci.c index 62041c7e924..fc96f8cb9c0 100644 --- a/drivers/mmc/host/sdhci.c +++ b/drivers/mmc/host/sdhci.c @@ -773,8 +773,14 @@ static void sdhci_prepare_data(struct sdhci_host *host, struct mmc_data *data) } if (!(host->flags & SDHCI_REQ_USE_DMA)) { - sg_miter_start(&host->sg_miter, - data->sg, data->sg_len, SG_MITER_ATOMIC); + int flags; + + flags = SG_MITER_ATOMIC; + if (host->data->flags & MMC_DATA_READ) + flags |= SG_MITER_TO_SG; + else + flags |= SG_MITER_FROM_SG; + sg_miter_start(&host->sg_miter, data->sg, data->sg_len, flags); host->blocks = data->blocks; } -- cgit v1.2.3 From 4b2a108cd0d34880fe9d932258ca5b2ccebcd05e Mon Sep 17 00:00:00 2001 From: Sebastian Andrzej Siewior Date: Mon, 22 Jun 2009 09:18:05 +0200 Subject: cb710: use SG_MITER_TO_SG/SG_MITER_FROM_SG MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit the code allready uses flush_kernel_dcache_page(). This patch updates the driver to the recent sg API changes which require that either SG_MITER_TO_SG or SG_MITER_FROM_SG is set. SG_MITER_TO_SG calls flush_kernel_dcache_page() in sg_mitter_stop() Signed-off-by: Sebastian Andrzej Siewior Acked-by: Michał Mirosław Signed-off-by: Pierre Ossman --- drivers/misc/cb710/sgbuf2.c | 4 ---- drivers/mmc/host/cb710-mmc.c | 6 +++--- include/linux/cb710.h | 29 +++-------------------------- 3 files changed, 6 insertions(+), 33 deletions(-) diff --git a/drivers/misc/cb710/sgbuf2.c b/drivers/misc/cb710/sgbuf2.c index d38a7acdb6e..d019746551f 100644 --- a/drivers/misc/cb710/sgbuf2.c +++ b/drivers/misc/cb710/sgbuf2.c @@ -114,7 +114,6 @@ static void sg_dwiter_write_slow(struct sg_mapping_iter *miter, uint32_t data) if (!left) return; addr += len; - flush_kernel_dcache_page(miter->page); } while (sg_dwiter_next(miter)); } @@ -142,9 +141,6 @@ void cb710_sg_dwiter_write_next_block(struct sg_mapping_iter *miter, uint32_t da return; } else sg_dwiter_write_slow(miter, data); - - if (miter->length == miter->consumed) - flush_kernel_dcache_page(miter->page); } EXPORT_SYMBOL_GPL(cb710_sg_dwiter_write_next_block); diff --git a/drivers/mmc/host/cb710-mmc.c b/drivers/mmc/host/cb710-mmc.c index 11efefb1af5..4e72964a7b4 100644 --- a/drivers/mmc/host/cb710-mmc.c +++ b/drivers/mmc/host/cb710-mmc.c @@ -278,7 +278,7 @@ static int cb710_mmc_receive(struct cb710_slot *slot, struct mmc_data *data) if (unlikely(data->blksz & 15 && (data->blocks != 1 || data->blksz != 8))) return -EINVAL; - sg_miter_start(&miter, data->sg, data->sg_len, 0); + sg_miter_start(&miter, data->sg, data->sg_len, SG_MITER_TO_SG); cb710_modify_port_8(slot, CB710_MMC_CONFIG2_PORT, 15, CB710_MMC_C2_READ_PIO_SIZE_MASK); @@ -307,7 +307,7 @@ static int cb710_mmc_receive(struct cb710_slot *slot, struct mmc_data *data) goto out; } out: - cb710_sg_miter_stop_writing(&miter); + sg_miter_stop(&miter); return err; } @@ -322,7 +322,7 @@ static int cb710_mmc_send(struct cb710_slot *slot, struct mmc_data *data) if (unlikely(data->blocks > 1 && data->blksz & 15)) return -EINVAL; - sg_miter_start(&miter, data->sg, data->sg_len, 0); + sg_miter_start(&miter, data->sg, data->sg_len, SG_MITER_FROM_SG); cb710_modify_port_8(slot, CB710_MMC_CONFIG2_PORT, 0, CB710_MMC_C2_READ_PIO_SIZE_MASK); diff --git a/include/linux/cb710.h b/include/linux/cb710.h index 63bc9a4d292..8cc10411bab 100644 --- a/include/linux/cb710.h +++ b/include/linux/cb710.h @@ -140,29 +140,6 @@ void cb710_dump_regs(struct cb710_chip *chip, unsigned dump); #include #include -/** - * cb710_sg_miter_stop_writing - stop mapping iteration after writing - * @miter: sg mapping iter to be stopped - * - * Description: - * Stops mapping iterator @miter. @miter should have been started - * started using sg_miter_start(). A stopped iteration can be - * resumed by calling sg_miter_next() on it. This is useful when - * resources (kmap) need to be released during iteration. - * - * This is a convenience wrapper that will be optimized out for arches - * that don't need flush_kernel_dcache_page(). - * - * Context: - * IRQ disabled if the SG_MITER_ATOMIC is set. Don't care otherwise. - */ -static inline void cb710_sg_miter_stop_writing(struct sg_mapping_iter *miter) -{ - if (miter->page) - flush_kernel_dcache_page(miter->page); - sg_miter_stop(miter); -} - /* * 32-bit PIO mapping sg iterator * @@ -171,12 +148,12 @@ static inline void cb710_sg_miter_stop_writing(struct sg_mapping_iter *miter) * without DMA support). * * Best-case reading (transfer from device): - * sg_miter_start(); + * sg_miter_start(, SG_MITER_TO_SG); * cb710_sg_dwiter_write_from_io(); - * cb710_sg_miter_stop_writing(); + * sg_miter_stop(); * * Best-case writing (transfer to device): - * sg_miter_start(); + * sg_miter_start(, SG_MITER_FROM_SG); * cb710_sg_dwiter_read_to_io(); * sg_miter_stop(); */ -- cgit v1.2.3 From a9239d750d9991f2feee78fc5669a4613abc1adb Mon Sep 17 00:00:00 2001 From: Joe Perches Date: Sun, 28 Jun 2009 09:26:31 -0700 Subject: imxmmc: Remove unnecessary semicolons Signed-off-by: Joe Perches Acked-by: Pavel Pisa Signed-off-by: Pierre Ossman --- drivers/mmc/host/imxmmc.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/mmc/host/imxmmc.c b/drivers/mmc/host/imxmmc.c index e0be21a4a69..bf98d7cc928 100644 --- a/drivers/mmc/host/imxmmc.c +++ b/drivers/mmc/host/imxmmc.c @@ -652,7 +652,7 @@ static irqreturn_t imxmci_irq(int irq, void *devid) set_bit(IMXMCI_PEND_STARTED_b, &host->pending_events); tasklet_schedule(&host->tasklet); - return IRQ_RETVAL(handled);; + return IRQ_RETVAL(handled); } static void imxmci_tasklet_fnc(unsigned long data) -- cgit v1.2.3 From 3822a0e38c329a598cb6f5baa16be7504e0db8d9 Mon Sep 17 00:00:00 2001 From: Pierre Ossman Date: Fri, 31 Jul 2009 12:27:28 +0200 Subject: mmc: orphan subsystem I do not have the time to take care of this, so remove myself as maintainer. Signed-off-by: Pierre Ossman --- MAINTAINERS | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) diff --git a/MAINTAINERS b/MAINTAINERS index 79471ba4981..d6befb2c470 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -3420,8 +3420,7 @@ S: Supported F: drivers/mfd/ MULTIMEDIA CARD (MMC), SECURE DIGITAL (SD) AND SDIO SUBSYSTEM -M: Pierre Ossman -S: Maintained +S: Orphan F: drivers/mmc/ F: include/linux/mmc/ -- cgit v1.2.3 From c7121843685de2bf7f3afd3ae1d6a146010bf1fc Mon Sep 17 00:00:00 2001 From: Magnus Damm Date: Tue, 28 Jul 2009 14:09:55 -0700 Subject: clocksource: Save mult_orig in clocksource_disable() To fix the common case where ->enable() does not set up mult, make sure mult_orig is saved in mult on disable. Also add comments to explain why we do this. Signed-off-by: Magnus Damm Cc: johnstul@us.ibm.com Cc: lethal@linux-sh.org Cc: akpm@linux-foundation.org LKML-Reference: <20090618152432.10136.9932.sendpatchset@rx1.opensource.se> Signed-off-by: Thomas Gleixner --- include/linux/clocksource.h | 14 +++++++++++++- 1 file changed, 13 insertions(+), 1 deletion(-) diff --git a/include/linux/clocksource.h b/include/linux/clocksource.h index c56457c8334..1219be4fb42 100644 --- a/include/linux/clocksource.h +++ b/include/linux/clocksource.h @@ -293,7 +293,12 @@ static inline int clocksource_enable(struct clocksource *cs) if (cs->enable) ret = cs->enable(cs); - /* save mult_orig on enable */ + /* + * The frequency may have changed while the clocksource + * was disabled. If so the code in ->enable() must update + * the mult value to reflect the new frequency. Make sure + * mult_orig follows this change. + */ cs->mult_orig = cs->mult; return ret; @@ -309,6 +314,13 @@ static inline int clocksource_enable(struct clocksource *cs) */ static inline void clocksource_disable(struct clocksource *cs) { + /* + * Save mult_orig in mult so clocksource_enable() can + * restore the value regardless if ->enable() updates + * the value of mult or not. + */ + cs->mult = cs->mult_orig; + if (cs->disable) cs->disable(cs); } -- cgit v1.2.3 From ed680c4ad478d0fee9740f7d029087f181346564 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Fri, 31 Jul 2009 17:40:45 -0700 Subject: Linux 2.6.31-rc5 --- Makefile | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/Makefile b/Makefile index 063d738405e..0d46615bffe 100644 --- a/Makefile +++ b/Makefile @@ -1,7 +1,7 @@ VERSION = 2 PATCHLEVEL = 6 SUBLEVEL = 31 -EXTRAVERSION = -rc4 +EXTRAVERSION = -rc5 NAME = Man-Eating Seals of Antiquity # *DOCUMENTATION* -- cgit v1.2.3 From 7cc515f74d2871daff106a17714bfd16bcb045ca Mon Sep 17 00:00:00 2001 From: Kevin Hilman Date: Wed, 10 Jun 2009 09:02:25 -0700 Subject: OMAP2/3: PM: make PM __init calls static Signed-off-by: Kevin Hilman --- arch/arm/mach-omap2/pm.h | 3 --- arch/arm/mach-omap2/pm24xx.c | 2 +- arch/arm/mach-omap2/pm34xx.c | 2 +- 3 files changed, 2 insertions(+), 5 deletions(-) diff --git a/arch/arm/mach-omap2/pm.h b/arch/arm/mach-omap2/pm.h index f7b3baf7667..21201cd4117 100644 --- a/arch/arm/mach-omap2/pm.h +++ b/arch/arm/mach-omap2/pm.h @@ -11,9 +11,6 @@ #ifndef __ARCH_ARM_MACH_OMAP2_PM_H #define __ARCH_ARM_MACH_OMAP2_PM_H -extern int omap2_pm_init(void); -extern int omap3_pm_init(void); - #ifdef CONFIG_PM_DEBUG extern void omap2_pm_dump(int mode, int resume, unsigned int us); extern int omap2_pm_debug; diff --git a/arch/arm/mach-omap2/pm24xx.c b/arch/arm/mach-omap2/pm24xx.c index db1025562fb..528dbdc26e2 100644 --- a/arch/arm/mach-omap2/pm24xx.c +++ b/arch/arm/mach-omap2/pm24xx.c @@ -470,7 +470,7 @@ static void __init prcm_setup_regs(void) WKUP_MOD, PM_WKEN); } -int __init omap2_pm_init(void) +static int __init omap2_pm_init(void) { u32 l; diff --git a/arch/arm/mach-omap2/pm34xx.c b/arch/arm/mach-omap2/pm34xx.c index 841d4c5ed8b..765cdc0cd7a 100644 --- a/arch/arm/mach-omap2/pm34xx.c +++ b/arch/arm/mach-omap2/pm34xx.c @@ -652,7 +652,7 @@ static int __init clkdms_setup(struct clockdomain *clkdm) return 0; } -int __init omap3_pm_init(void) +static int __init omap3_pm_init(void) { struct power_state *pwrst, *tmp; int ret; -- cgit v1.2.3 From 364dd47466ff7a7749bf037df4bf3b7aedbfe6f4 Mon Sep 17 00:00:00 2001 From: Kevin Hilman Date: Tue, 9 Jun 2009 11:45:30 -0700 Subject: OMAP3: PM: CM_REGADDR macros using wrong name Signed-off-by: Kevin Hilman --- arch/arm/mach-omap2/cm.h | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/arch/arm/mach-omap2/cm.h b/arch/arm/mach-omap2/cm.h index 1d3c93bf86d..f3c91a1ca39 100644 --- a/arch/arm/mach-omap2/cm.h +++ b/arch/arm/mach-omap2/cm.h @@ -29,9 +29,9 @@ * These registers appear once per CM module. */ -#define OMAP3430_CM_REVISION OMAP_CM_REGADDR(OCP_MOD, 0x0000) -#define OMAP3430_CM_SYSCONFIG OMAP_CM_REGADDR(OCP_MOD, 0x0010) -#define OMAP3430_CM_POLCTRL OMAP_CM_REGADDR(OCP_MOD, 0x009c) +#define OMAP3430_CM_REVISION OMAP34XX_CM_REGADDR(OCP_MOD, 0x0000) +#define OMAP3430_CM_SYSCONFIG OMAP34XX_CM_REGADDR(OCP_MOD, 0x0010) +#define OMAP3430_CM_POLCTRL OMAP34XX_CM_REGADDR(OCP_MOD, 0x009c) #define OMAP3_CM_CLKOUT_CTRL_OFFSET 0x0070 #define OMAP3430_CM_CLKOUT_CTRL OMAP_CM_REGADDR(OMAP3430_CCR_MOD, 0x0070) -- cgit v1.2.3 From 3a6667acf916b3e32be4682196882fc2ed0ec23e Mon Sep 17 00:00:00 2001 From: Kevin Hilman Date: Mon, 27 Apr 2009 07:50:23 -0700 Subject: OMAP3: PM: Ensure PRCM interrupts are cleared at boot Any pending PRCM interrupts can prevent retention. Ensure they are cleared during boot. Signed-off-by: Kevin Hilman --- arch/arm/mach-omap2/pm34xx.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/arch/arm/mach-omap2/pm34xx.c b/arch/arm/mach-omap2/pm34xx.c index 765cdc0cd7a..cc83dfc39a8 100644 --- a/arch/arm/mach-omap2/pm34xx.c +++ b/arch/arm/mach-omap2/pm34xx.c @@ -613,6 +613,9 @@ static void __init prcm_setup_regs(void) /* Clear any pending PRCM interrupts */ prm_write_mod_reg(0, OCP_MOD, OMAP3_PRM_IRQSTATUS_MPU_OFFSET); + /* Clear any pending PRCM interrupts */ + prm_write_mod_reg(0, OCP_MOD, OMAP3_PRM_IRQSTATUS_MPU_OFFSET); + omap3_iva_idle(); omap3_d2d_idle(); } -- cgit v1.2.3 From 3a07ae30a0bfa93ff2b242acf670c6d8e2de35de Mon Sep 17 00:00:00 2001 From: Kevin Hilman Date: Mon, 27 Apr 2009 16:14:54 -0700 Subject: OMAP3: PM: Clear pending PRCM reset flags on init Any pending reset flags can prevent retention. Ensure they are all cleared during boot. Signed-off-by: Kevin Hilman --- arch/arm/mach-omap2/pm34xx.c | 9 +++++++++ 1 file changed, 9 insertions(+) diff --git a/arch/arm/mach-omap2/pm34xx.c b/arch/arm/mach-omap2/pm34xx.c index cc83dfc39a8..1422e931f57 100644 --- a/arch/arm/mach-omap2/pm34xx.c +++ b/arch/arm/mach-omap2/pm34xx.c @@ -613,6 +613,15 @@ static void __init prcm_setup_regs(void) /* Clear any pending PRCM interrupts */ prm_write_mod_reg(0, OCP_MOD, OMAP3_PRM_IRQSTATUS_MPU_OFFSET); + /* Clear any pending 'reset' flags */ + prm_write_mod_reg(0xffffffff, MPU_MOD, RM_RSTST); + prm_write_mod_reg(0xffffffff, CORE_MOD, RM_RSTST); + prm_write_mod_reg(0xffffffff, OMAP3430_PER_MOD, RM_RSTST); + prm_write_mod_reg(0xffffffff, OMAP3430_EMU_MOD, RM_RSTST); + prm_write_mod_reg(0xffffffff, OMAP3430_NEON_MOD, RM_RSTST); + prm_write_mod_reg(0xffffffff, OMAP3430_DSS_MOD, RM_RSTST); + prm_write_mod_reg(0xffffffff, OMAP3430ES2_USBHOST_MOD, RM_RSTST); + /* Clear any pending PRCM interrupts */ prm_write_mod_reg(0, OCP_MOD, OMAP3_PRM_IRQSTATUS_MPU_OFFSET); -- cgit v1.2.3 From 040fed059c34da5115790609f1a038fc9aec88d1 Mon Sep 17 00:00:00 2001 From: Kevin Hilman Date: Tue, 5 May 2009 16:34:25 -0700 Subject: OMAP3: PM: prevent module wakeups from waking IVA2 By default, prevent functional wakeups from inside a module from waking up the IVA2. Let DSP Bridge code handle this when loaded. Signed-off-by: Kevin Hilman --- arch/arm/mach-omap2/pm34xx.c | 6 ++++++ 1 file changed, 6 insertions(+) diff --git a/arch/arm/mach-omap2/pm34xx.c b/arch/arm/mach-omap2/pm34xx.c index 1422e931f57..c813a081c3c 100644 --- a/arch/arm/mach-omap2/pm34xx.c +++ b/arch/arm/mach-omap2/pm34xx.c @@ -613,6 +613,12 @@ static void __init prcm_setup_regs(void) /* Clear any pending PRCM interrupts */ prm_write_mod_reg(0, OCP_MOD, OMAP3_PRM_IRQSTATUS_MPU_OFFSET); + /* Don't attach IVA interrupts */ + prm_write_mod_reg(0, WKUP_MOD, OMAP3430_PM_IVAGRPSEL); + prm_write_mod_reg(0, CORE_MOD, OMAP3430_PM_IVAGRPSEL1); + prm_write_mod_reg(0, CORE_MOD, OMAP3430ES2_PM_IVAGRPSEL3); + prm_write_mod_reg(0, OMAP3430_PER_MOD, OMAP3430_PM_IVAGRPSEL); + /* Clear any pending 'reset' flags */ prm_write_mod_reg(0xffffffff, MPU_MOD, RM_RSTST); prm_write_mod_reg(0xffffffff, CORE_MOD, RM_RSTST); -- cgit v1.2.3 From 10f90ed2d727c0f344d910c02c9726d0481d9b00 Mon Sep 17 00:00:00 2001 From: Kevin Hilman Date: Wed, 24 Jun 2009 11:39:18 -0700 Subject: OMAP3: PM: Do not build suspend code if SUSPEND is not enabled Signed-off-by: Jouni Hogander Signed-off-by: Kevin Hilman --- arch/arm/mach-omap2/pm34xx.c | 6 ++++++ 1 file changed, 6 insertions(+) diff --git a/arch/arm/mach-omap2/pm34xx.c b/arch/arm/mach-omap2/pm34xx.c index c813a081c3c..528f725722a 100644 --- a/arch/arm/mach-omap2/pm34xx.c +++ b/arch/arm/mach-omap2/pm34xx.c @@ -39,7 +39,9 @@ struct power_state { struct powerdomain *pwrdm; u32 next_state; +#ifdef CONFIG_SUSPEND u32 saved_state; +#endif struct list_head node; }; @@ -293,6 +295,7 @@ out: local_irq_enable(); } +#ifdef CONFIG_SUSPEND static int omap3_pm_prepare(void) { disable_hlt(); @@ -366,6 +369,7 @@ static struct platform_suspend_ops omap_pm_ops = { .finish = omap3_pm_finish, .valid = suspend_valid_only_mem, }; +#endif /* CONFIG_SUSPEND */ /** @@ -710,7 +714,9 @@ static int __init omap3_pm_init(void) _omap_sram_idle = omap_sram_push(omap34xx_cpu_suspend, omap34xx_cpu_suspend_sz); +#ifdef CONFIG_SUSPEND suspend_set_ops(&omap_pm_ops); +#endif /* CONFIG_SUSPEND */ pm_idle = omap3_pm_idle; -- cgit v1.2.3 From 4789998a30d845d94a7595076d1392ffd5a9d39e Mon Sep 17 00:00:00 2001 From: Kevin Hilman Date: Wed, 24 Jun 2009 10:32:03 -0700 Subject: OMAP4: UART: cleanup special case IRQ handling Streamline the OMAP4 special IRQ assignments by putting inside normal init loop instead of having a separate loop. Signed-off-by: Kevin Hilman --- arch/arm/mach-omap2/serial.c | 7 +++---- 1 file changed, 3 insertions(+), 4 deletions(-) diff --git a/arch/arm/mach-omap2/serial.c b/arch/arm/mach-omap2/serial.c index b094c15bfe4..c82ec95cd79 100644 --- a/arch/arm/mach-omap2/serial.c +++ b/arch/arm/mach-omap2/serial.c @@ -496,10 +496,6 @@ void __init omap_serial_init(void) if (info == NULL) return; - if (cpu_is_omap44xx()) { - for (i = 0; i < OMAP_MAX_NR_PORTS; i++) - serial_platform_data[i].irq += 32; - } for (i = 0; i < OMAP_MAX_NR_PORTS; i++) { struct plat_serial8250_port *p = serial_platform_data + i; @@ -533,6 +529,9 @@ void __init omap_serial_init(void) uart->p = p; list_add(&uart->node, &uart_list); + if (cpu_is_omap44xx()) + p->irq += 32; + omap_uart_enable_clocks(uart); omap_uart_reset(uart); omap_uart_idle_init(uart); -- cgit v1.2.3 From 2466211e5debd205fc550d871fe0ab9b9a6d02ed Mon Sep 17 00:00:00 2001 From: Tero Kristo Date: Thu, 5 Mar 2009 16:32:23 +0200 Subject: OMAP3: Fixed crash bug with serial + suspend It was possible for an unhandled interrupt to occur if there was incoming serial traffic during wakeup from suspend. This was caused by the code in arch-arm/mach-omap2/serial.c keeping interrupt enabled all the time, but not acking its interrupts. Applies on top of PM branch. Use the PM begin/end hooks to ensure that the "serial idle" interrupts are disabled during the suspend path. Also, since begin/end hooks are now used, use the suspend_state that is passed in the begin hook instead of the enter hook as per the platform_suspend_ops docs. Signed-off-by: Tero Kristo Signed-off-by: Kevin Hilman --- arch/arm/mach-omap2/pm34xx.c | 23 +++++++++++++++++++++-- arch/arm/mach-omap2/serial.c | 14 ++++++++++++++ arch/arm/plat-omap/include/mach/serial.h | 1 + 3 files changed, 36 insertions(+), 2 deletions(-) diff --git a/arch/arm/mach-omap2/pm34xx.c b/arch/arm/mach-omap2/pm34xx.c index 528f725722a..b07efb26de1 100644 --- a/arch/arm/mach-omap2/pm34xx.c +++ b/arch/arm/mach-omap2/pm34xx.c @@ -296,6 +296,8 @@ out: } #ifdef CONFIG_SUSPEND +static suspend_state_t suspend_state; + static int omap3_pm_prepare(void) { disable_hlt(); @@ -342,11 +344,11 @@ restore: return ret; } -static int omap3_pm_enter(suspend_state_t state) +static int omap3_pm_enter(suspend_state_t unused) { int ret = 0; - switch (state) { + switch (suspend_state) { case PM_SUSPEND_STANDBY: case PM_SUSPEND_MEM: ret = omap3_pm_suspend(); @@ -363,7 +365,24 @@ static void omap3_pm_finish(void) enable_hlt(); } +/* Hooks to enable / disable UART interrupts during suspend */ +static int omap3_pm_begin(suspend_state_t state) +{ + suspend_state = state; + omap_uart_enable_irqs(0); + return 0; +} + +static void omap3_pm_end(void) +{ + suspend_state = PM_SUSPEND_ON; + omap_uart_enable_irqs(1); + return; +} + static struct platform_suspend_ops omap_pm_ops = { + .begin = omap3_pm_begin, + .end = omap3_pm_end, .prepare = omap3_pm_prepare, .enter = omap3_pm_enter, .finish = omap3_pm_finish, diff --git a/arch/arm/mach-omap2/serial.c b/arch/arm/mach-omap2/serial.c index c82ec95cd79..5352d05b42d 100644 --- a/arch/arm/mach-omap2/serial.c +++ b/arch/arm/mach-omap2/serial.c @@ -435,6 +435,20 @@ static void omap_uart_idle_init(struct omap_uart_state *uart) WARN_ON(ret); } +void omap_uart_enable_irqs(int enable) +{ + int ret; + struct omap_uart_state *uart; + + list_for_each_entry(uart, &uart_list, node) { + if (enable) + ret = request_irq(uart->p->irq, omap_uart_interrupt, + IRQF_SHARED, "serial idle", (void *)uart); + else + free_irq(uart->p->irq, (void *)uart); + } +} + static ssize_t sleep_timeout_show(struct kobject *kobj, struct kobj_attribute *attr, char *buf) diff --git a/arch/arm/plat-omap/include/mach/serial.h b/arch/arm/plat-omap/include/mach/serial.h index 13abd02d152..def0529c75e 100644 --- a/arch/arm/plat-omap/include/mach/serial.h +++ b/arch/arm/plat-omap/include/mach/serial.h @@ -59,6 +59,7 @@ extern void omap_uart_check_wakeup(void); extern void omap_uart_prepare_suspend(void); extern void omap_uart_prepare_idle(int num); extern void omap_uart_resume_idle(int num); +extern void omap_uart_enable_irqs(int enable); #endif #endif -- cgit v1.2.3 From fd455ea899b5a14a8cdd276e15f3b47696526f92 Mon Sep 17 00:00:00 2001 From: Kevin Hilman Date: Mon, 27 Apr 2009 12:27:36 -0700 Subject: OMAP2/3/4: UART: Allow per-UART disabling wakeup for serial ports This patch causes the OMAP uarts to honor the sysfs power/wakeup file for IOPAD wakeups. Before the OMAP was always woken up from off mode on a rs232 signal change. This patch also creates a different platform device for each serial port so that the wakeup properties can be control per port. By default, IOPAD wakeups are enabled for each UART. To disable, # echo disabled > /sys/devices/platform/serial8250.0/power/wakeup Where serial8250.0 can be replaced by .1, or .2 to control the other ports. Original idea and original patch from Russ Dill Cc: Russ Dill Signed-off-by: Kevin Hilman --- arch/arm/mach-omap2/serial.c | 174 ++++++++++++++++++++++++++++--------------- 1 file changed, 116 insertions(+), 58 deletions(-) diff --git a/arch/arm/mach-omap2/serial.c b/arch/arm/mach-omap2/serial.c index 5352d05b42d..6f35a7e4893 100644 --- a/arch/arm/mach-omap2/serial.c +++ b/arch/arm/mach-omap2/serial.c @@ -54,6 +54,7 @@ struct omap_uart_state { struct plat_serial8250_port *p; struct list_head node; + struct platform_device pdev; #if defined(CONFIG_ARCH_OMAP3) && defined(CONFIG_PM) int context_valid; @@ -68,10 +69,9 @@ struct omap_uart_state { #endif }; -static struct omap_uart_state omap_uart[OMAP_MAX_NR_PORTS]; static LIST_HEAD(uart_list); -static struct plat_serial8250_port serial_platform_data[] = { +static struct plat_serial8250_port serial_platform_data0[] = { { .membase = IO_ADDRESS(OMAP_UART1_BASE), .mapbase = OMAP_UART1_BASE, @@ -81,6 +81,12 @@ static struct plat_serial8250_port serial_platform_data[] = { .regshift = 2, .uartclk = OMAP24XX_BASE_BAUD * 16, }, { + .flags = 0 + } +}; + +static struct plat_serial8250_port serial_platform_data1[] = { + { .membase = IO_ADDRESS(OMAP_UART2_BASE), .mapbase = OMAP_UART2_BASE, .irq = 73, @@ -89,6 +95,12 @@ static struct plat_serial8250_port serial_platform_data[] = { .regshift = 2, .uartclk = OMAP24XX_BASE_BAUD * 16, }, { + .flags = 0 + } +}; + +static struct plat_serial8250_port serial_platform_data2[] = { + { .membase = IO_ADDRESS(OMAP_UART3_BASE), .mapbase = OMAP_UART3_BASE, .irq = 74, @@ -217,6 +229,40 @@ static inline void omap_uart_disable_clocks(struct omap_uart_state *uart) clk_disable(uart->fck); } +static void omap_uart_enable_wakeup(struct omap_uart_state *uart) +{ + /* Set wake-enable bit */ + if (uart->wk_en && uart->wk_mask) { + u32 v = __raw_readl(uart->wk_en); + v |= uart->wk_mask; + __raw_writel(v, uart->wk_en); + } + + /* Ensure IOPAD wake-enables are set */ + if (cpu_is_omap34xx() && uart->padconf) { + u16 v = omap_ctrl_readw(uart->padconf); + v |= OMAP3_PADCONF_WAKEUPENABLE0; + omap_ctrl_writew(v, uart->padconf); + } +} + +static void omap_uart_disable_wakeup(struct omap_uart_state *uart) +{ + /* Clear wake-enable bit */ + if (uart->wk_en && uart->wk_mask) { + u32 v = __raw_readl(uart->wk_en); + v &= ~uart->wk_mask; + __raw_writel(v, uart->wk_en); + } + + /* Ensure IOPAD wake-enables are cleared */ + if (cpu_is_omap34xx() && uart->padconf) { + u16 v = omap_ctrl_readw(uart->padconf); + v &= ~OMAP3_PADCONF_WAKEUPENABLE0; + omap_ctrl_writew(v, uart->padconf); + } +} + static void omap_uart_smart_idle_enable(struct omap_uart_state *uart, int enable) { @@ -246,6 +292,11 @@ static void omap_uart_block_sleep(struct omap_uart_state *uart) static void omap_uart_allow_sleep(struct omap_uart_state *uart) { + if (device_may_wakeup(&uart->pdev.dev)) + omap_uart_enable_wakeup(uart); + else + omap_uart_disable_wakeup(uart); + if (!uart->clocked) return; @@ -292,7 +343,6 @@ void omap_uart_resume_idle(int num) /* Check for normal UART wakeup */ if (__raw_readl(uart->wk_st) & uart->wk_mask) omap_uart_block_sleep(uart); - return; } } @@ -346,16 +396,13 @@ static irqreturn_t omap_uart_interrupt(int irq, void *dev_id) return IRQ_NONE; } -static u32 sleep_timeout = DEFAULT_TIMEOUT; - static void omap_uart_idle_init(struct omap_uart_state *uart) { - u32 v; struct plat_serial8250_port *p = uart->p; int ret; uart->can_sleep = 0; - uart->timeout = sleep_timeout; + uart->timeout = DEFAULT_TIMEOUT; setup_timer(&uart->timer, omap_uart_idle_timer, (unsigned long) uart); mod_timer(&uart->timer, jiffies + uart->timeout); @@ -413,22 +460,6 @@ static void omap_uart_idle_init(struct omap_uart_state *uart) uart->padconf = 0; } - /* Set wake-enable bit */ - if (uart->wk_en && uart->wk_mask) { - v = __raw_readl(uart->wk_en); - v |= uart->wk_mask; - __raw_writel(v, uart->wk_en); - } - - /* Ensure IOPAD wake-enables are set */ - if (cpu_is_omap34xx() && uart->padconf) { - u16 v; - - v = omap_ctrl_readw(uart->padconf); - v |= OMAP3_PADCONF_WAKEUPENABLE0; - omap_ctrl_writew(v, uart->padconf); - } - p->flags |= UPF_SHARE_IRQ; ret = request_irq(p->irq, omap_uart_interrupt, IRQF_SHARED, "serial idle", (void *)uart); @@ -449,54 +480,81 @@ void omap_uart_enable_irqs(int enable) } } -static ssize_t sleep_timeout_show(struct kobject *kobj, - struct kobj_attribute *attr, +static ssize_t sleep_timeout_show(struct device *dev, + struct device_attribute *attr, char *buf) { - return sprintf(buf, "%u\n", sleep_timeout / HZ); + struct platform_device *pdev = container_of(dev, + struct platform_device, dev); + struct omap_uart_state *uart = container_of(pdev, + struct omap_uart_state, pdev); + + return sprintf(buf, "%u\n", uart->timeout / HZ); } -static ssize_t sleep_timeout_store(struct kobject *kobj, - struct kobj_attribute *attr, +static ssize_t sleep_timeout_store(struct device *dev, + struct device_attribute *attr, const char *buf, size_t n) { - struct omap_uart_state *uart; + struct platform_device *pdev = container_of(dev, + struct platform_device, dev); + struct omap_uart_state *uart = container_of(pdev, + struct omap_uart_state, pdev); unsigned int value; if (sscanf(buf, "%u", &value) != 1) { printk(KERN_ERR "sleep_timeout_store: Invalid value\n"); return -EINVAL; } - sleep_timeout = value * HZ; - list_for_each_entry(uart, &uart_list, node) { - uart->timeout = sleep_timeout; - if (uart->timeout) - mod_timer(&uart->timer, jiffies + uart->timeout); - else - /* A zero value means disable timeout feature */ - omap_uart_block_sleep(uart); - } + + uart->timeout = value * HZ; + if (uart->timeout) + mod_timer(&uart->timer, jiffies + uart->timeout); + else + /* A zero value means disable timeout feature */ + omap_uart_block_sleep(uart); + return n; } -static struct kobj_attribute sleep_timeout_attr = - __ATTR(sleep_timeout, 0644, sleep_timeout_show, sleep_timeout_store); - +DEVICE_ATTR(sleep_timeout, 0644, sleep_timeout_show, sleep_timeout_store); +#define DEV_CREATE_FILE(dev, attr) WARN_ON(device_create_file(dev, attr)) #else static inline void omap_uart_idle_init(struct omap_uart_state *uart) {} +#define DEV_CREATE_FILE(dev, attr) #endif /* CONFIG_PM */ -static struct platform_device serial_device = { - .name = "serial8250", - .id = PLAT8250_DEV_PLATFORM, - .dev = { - .platform_data = serial_platform_data, +static struct omap_uart_state omap_uart[OMAP_MAX_NR_PORTS] = { + { + .pdev = { + .name = "serial8250", + .id = PLAT8250_DEV_PLATFORM, + .dev = { + .platform_data = serial_platform_data0, + }, + }, + }, { + .pdev = { + .name = "serial8250", + .id = PLAT8250_DEV_PLATFORM1, + .dev = { + .platform_data = serial_platform_data1, + }, + }, + }, { + .pdev = { + .name = "serial8250", + .id = PLAT8250_DEV_PLATFORM2, + .dev = { + .platform_data = serial_platform_data2, + }, + }, }, }; void __init omap_serial_init(void) { - int i, err; + int i; const struct omap_uart_config *info; char name[16]; @@ -512,8 +570,10 @@ void __init omap_serial_init(void) return; for (i = 0; i < OMAP_MAX_NR_PORTS; i++) { - struct plat_serial8250_port *p = serial_platform_data + i; struct omap_uart_state *uart = &omap_uart[i]; + struct platform_device *pdev = &uart->pdev; + struct device *dev = &pdev->dev; + struct plat_serial8250_port *p = dev->platform_data; if (!(info->enabled_uarts & (1 << i))) { p->membase = NULL; @@ -549,15 +609,13 @@ void __init omap_serial_init(void) omap_uart_enable_clocks(uart); omap_uart_reset(uart); omap_uart_idle_init(uart); - } - - err = platform_device_register(&serial_device); - -#ifdef CONFIG_PM - if (!err) - err = sysfs_create_file(&serial_device.dev.kobj, - &sleep_timeout_attr.attr); -#endif + if (WARN_ON(platform_device_register(pdev))) + continue; + if ((cpu_is_omap34xx() && uart->padconf) || + (uart->wk_en && uart->wk_mask)) { + device_init_wakeup(dev, true); + DEV_CREATE_FILE(dev, &dev_attr_sleep_timeout); + } + } } - -- cgit v1.2.3 From bcf396c48012a5e4c7ab77be5c40df10d6bdb8ad Mon Sep 17 00:00:00 2001 From: Kevin Hilman Date: Tue, 30 Jun 2009 21:02:45 -0700 Subject: OMAP2/3/4: UART: allow in-order port traversal Use list_add_tail() when adding discovered UART ports. This is so traversal using list_for_each_entry() will traverse the list in the order they were found. Signed-off-by: Kevin Hilman --- arch/arm/mach-omap2/serial.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm/mach-omap2/serial.c b/arch/arm/mach-omap2/serial.c index 6f35a7e4893..a7421a50410 100644 --- a/arch/arm/mach-omap2/serial.c +++ b/arch/arm/mach-omap2/serial.c @@ -601,7 +601,7 @@ void __init omap_serial_init(void) uart->num = i; p->private_data = uart; uart->p = p; - list_add(&uart->node, &uart_list); + list_add_tail(&uart->node, &uart_list); if (cpu_is_omap44xx()) p->irq += 32; -- cgit v1.2.3 From 60c45ae1107c4ec47d2c84e5984ea59d02b2863d Mon Sep 17 00:00:00 2001 From: Eero Nurkkala Date: Tue, 23 Jun 2009 12:53:29 +0300 Subject: OMAP: PM: CPUfreq: obey min/max settings of policy Use the min/max settings from CPUfreq policy rather than processor defined min/max settings. Without this patch, it's possible to scale frequency outside the current policy range. Signed-off-by: Eero Nurkkala Signed-off-by: Kevin Hilman --- arch/arm/plat-omap/cpu-omap.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/arch/arm/plat-omap/cpu-omap.c b/arch/arm/plat-omap/cpu-omap.c index 843e8af6406..1868c0d8f9b 100644 --- a/arch/arm/plat-omap/cpu-omap.c +++ b/arch/arm/plat-omap/cpu-omap.c @@ -78,10 +78,10 @@ static int omap_target(struct cpufreq_policy *policy, /* Ensure desired rate is within allowed range. Some govenors * (ondemand) will just pass target_freq=0 to get the minimum. */ - if (target_freq < policy->cpuinfo.min_freq) - target_freq = policy->cpuinfo.min_freq; - if (target_freq > policy->cpuinfo.max_freq) - target_freq = policy->cpuinfo.max_freq; + if (target_freq < policy->min) + target_freq = policy->min; + if (target_freq > policy->max) + target_freq = policy->max; freqs.old = omap_getspeed(0); freqs.new = clk_round_rate(mpu_clk, target_freq * 1000) / 1000; -- cgit v1.2.3 From 6c5f80393b107b0c9e2a54b03b65d1880e706655 Mon Sep 17 00:00:00 2001 From: Jouni Hogander Date: Wed, 29 Oct 2008 12:06:04 +0200 Subject: OMAP3: PM: Fix wrong sequence in suspend. Powerdomain previous state is checked after restoring new states in suspend. This patch fixes this problem. Signed-off-by: Jouni Hogander Signed-off-by: Kevin Hilman --- arch/arm/mach-omap2/pm34xx.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm/mach-omap2/pm34xx.c b/arch/arm/mach-omap2/pm34xx.c index b07efb26de1..488d595d8e4 100644 --- a/arch/arm/mach-omap2/pm34xx.c +++ b/arch/arm/mach-omap2/pm34xx.c @@ -326,7 +326,6 @@ static int omap3_pm_suspend(void) restore: /* Restore next_pwrsts */ list_for_each_entry(pwrst, &pwrst_list, node) { - set_pwrdm_state(pwrst->pwrdm, pwrst->saved_state); state = pwrdm_read_prev_pwrst(pwrst->pwrdm); if (state > pwrst->next_state) { printk(KERN_INFO "Powerdomain (%s) didn't enter " @@ -334,6 +333,7 @@ restore: pwrst->pwrdm->name, pwrst->next_state); ret = -1; } + set_pwrdm_state(pwrst->pwrdm, pwrst->saved_state); } if (ret) printk(KERN_ERR "Could not enter target state in pm_suspend\n"); -- cgit v1.2.3 From 55b6019ae29456e0f1e4087546bf4221c48622a0 Mon Sep 17 00:00:00 2001 From: Kevin Hilman Date: Thu, 4 Jun 2009 15:57:10 -0700 Subject: OMAP: GPIO: clear/restore level/edge detect settings on mask/unmask If IRQ triggering is enabled, it can trigger a pending interrupt even for masked interrupts. Any pending GPIO interrupts can prevent the powerdomain from hitting retention. Problem found, reported and additional review and testing by Chunquiu Wang. Tested-by: Chunquiu Wang Signed-off-by: Kevin Hilman --- arch/arm/plat-omap/gpio.c | 6 ++++++ 1 file changed, 6 insertions(+) diff --git a/arch/arm/plat-omap/gpio.c b/arch/arm/plat-omap/gpio.c index 26b387c1242..77bad14633e 100644 --- a/arch/arm/plat-omap/gpio.c +++ b/arch/arm/plat-omap/gpio.c @@ -1189,6 +1189,7 @@ static void gpio_mask_irq(unsigned int irq) struct gpio_bank *bank = get_irq_chip_data(irq); _set_gpio_irqenable(bank, gpio, 0); + _set_gpio_triggering(bank, get_gpio_index(gpio), IRQ_TYPE_NONE); } static void gpio_unmask_irq(unsigned int irq) @@ -1196,6 +1197,11 @@ static void gpio_unmask_irq(unsigned int irq) unsigned int gpio = irq - IH_GPIO_BASE; struct gpio_bank *bank = get_irq_chip_data(irq); unsigned int irq_mask = 1 << get_gpio_index(gpio); + struct irq_desc *desc = irq_to_desc(irq); + u32 trigger = desc->status & IRQ_TYPE_SENSE_MASK; + + if (trigger) + _set_gpio_triggering(bank, get_gpio_index(gpio), trigger); /* For level-triggered GPIOs, the clearing must be done after * the HW source is cleared, thus after the handler has run */ -- cgit v1.2.3 From 6fd210a9cc398ecbff7bcdbe220651b73b654f56 Mon Sep 17 00:00:00 2001 From: Kevin Hilman Date: Mon, 20 Jul 2009 09:09:23 -0700 Subject: OMAP3: Overo: add missing pen-down GPIO definition Signed-off-by: Kevin Hilman --- arch/arm/mach-omap2/board-overo.c | 1 + 1 file changed, 1 insertion(+) diff --git a/arch/arm/mach-omap2/board-overo.c b/arch/arm/mach-omap2/board-overo.c index dff5528fbfb..e26af837510 100644 --- a/arch/arm/mach-omap2/board-overo.c +++ b/arch/arm/mach-omap2/board-overo.c @@ -51,6 +51,7 @@ #define OVERO_GPIO_BT_XGATE 15 #define OVERO_GPIO_W2W_NRESET 16 +#define OVERO_GPIO_PENDOWN 114 #define OVERO_GPIO_BT_NRESET 164 #define OVERO_GPIO_USBH_CPEN 168 #define OVERO_GPIO_USBH_NRESET 183 -- cgit v1.2.3 From 8db5d1a64d36d0750b88c6c13feeaf0e00be2eb4 Mon Sep 17 00:00:00 2001 From: Sascha Hauer Date: Mon, 25 May 2009 12:21:38 +0200 Subject: MXC: pass base/irq to mxc_timer_init Signed-off-by: Sascha Hauer --- arch/arm/mach-mx1/clock.c | 2 +- arch/arm/mach-mx2/clock_imx21.c | 2 +- arch/arm/mach-mx2/clock_imx27.c | 2 +- arch/arm/mach-mx3/clock-imx35.c | 2 +- arch/arm/mach-mx3/clock.c | 3 ++- arch/arm/plat-mxc/include/mach/common.h | 2 +- arch/arm/plat-mxc/time.c | 21 ++------------------- 7 files changed, 9 insertions(+), 25 deletions(-) diff --git a/arch/arm/mach-mx1/clock.c b/arch/arm/mach-mx1/clock.c index 0d0f306851d..7b739dd8700 100644 --- a/arch/arm/mach-mx1/clock.c +++ b/arch/arm/mach-mx1/clock.c @@ -626,7 +626,7 @@ int __init mx1_clocks_init(unsigned long fref) clk_enable(&hclk); clk_enable(&fclk); - mxc_timer_init(&gpt_clk); + mxc_timer_init(&gpt_clk, IO_ADDRESS(TIM1_BASE_ADDR), TIM1_INT); return 0; } diff --git a/arch/arm/mach-mx2/clock_imx21.c b/arch/arm/mach-mx2/clock_imx21.c index 0850fb88ec1..eede79855f4 100644 --- a/arch/arm/mach-mx2/clock_imx21.c +++ b/arch/arm/mach-mx2/clock_imx21.c @@ -1004,6 +1004,6 @@ int __init mx21_clocks_init(unsigned long lref, unsigned long href) clk_enable(&uart_clk[0]); #endif - mxc_timer_init(&gpt_clk[0]); + mxc_timer_init(&gpt_clk[0], IO_ADDRESS(GPT1_BASE_ADDR), MXC_INT_GPT1); return 0; } diff --git a/arch/arm/mach-mx2/clock_imx27.c b/arch/arm/mach-mx2/clock_imx27.c index 2c971442f3f..a0c577f80d4 100644 --- a/arch/arm/mach-mx2/clock_imx27.c +++ b/arch/arm/mach-mx2/clock_imx27.c @@ -748,7 +748,7 @@ int __init mx27_clocks_init(unsigned long fref) clk_enable(&uart1_clk); #endif - mxc_timer_init(&gpt1_clk); + mxc_timer_init(&gpt1_clk, IO_ADDRESS(GPT1_BASE_ADDR), MXC_INT_GPT1); return 0; } diff --git a/arch/arm/mach-mx3/clock-imx35.c b/arch/arm/mach-mx3/clock-imx35.c index 577ee83d1f6..4cf1849f552 100644 --- a/arch/arm/mach-mx3/clock-imx35.c +++ b/arch/arm/mach-mx3/clock-imx35.c @@ -456,7 +456,7 @@ int __init mx35_clocks_init() __raw_writel((3 << 26) | ll, CCM_BASE + CCM_CGR2); __raw_writel(0, CCM_BASE + CCM_CGR3); - mxc_timer_init(&gpt_clk); + mxc_timer_init(&ipg_clk, IO_ADDRESS(GPT1_BASE_ADDR), MXC_INT_GPT); return 0; } diff --git a/arch/arm/mach-mx3/clock.c b/arch/arm/mach-mx3/clock.c index 8b14239724c..25b6f55bfb0 100644 --- a/arch/arm/mach-mx3/clock.c +++ b/arch/arm/mach-mx3/clock.c @@ -29,6 +29,7 @@ #include #include +#include #include #include "crm_regs.h" @@ -609,7 +610,7 @@ int __init mx31_clocks_init(unsigned long fref) __raw_writel(reg, MXC_CCM_PMCR1); } - mxc_timer_init(&ipg_clk); + mxc_timer_init(&ipg_clk, IO_ADDRESS(GPT1_BASE_ADDR), MXC_INT_GPT); return 0; } diff --git a/arch/arm/plat-mxc/include/mach/common.h b/arch/arm/plat-mxc/include/mach/common.h index 02c3cd004db..1c48aefe4b6 100644 --- a/arch/arm/plat-mxc/include/mach/common.h +++ b/arch/arm/plat-mxc/include/mach/common.h @@ -20,7 +20,7 @@ extern void mx27_map_io(void); extern void mx31_map_io(void); extern void mx35_map_io(void); extern void mxc_init_irq(void); -extern void mxc_timer_init(struct clk *timer_clk); +extern void mxc_timer_init(struct clk *timer_clk, void __iomem *, int); extern int mx1_clocks_init(unsigned long fref); extern int mx21_clocks_init(unsigned long lref, unsigned long fref); extern int mx27_clocks_init(unsigned long fref); diff --git a/arch/arm/plat-mxc/time.c b/arch/arm/plat-mxc/time.c index 88fb3a57e02..7e71bb6270e 100644 --- a/arch/arm/plat-mxc/time.c +++ b/arch/arm/plat-mxc/time.c @@ -281,30 +281,13 @@ static int __init mxc_clockevent_init(struct clk *timer_clk) return 0; } -void __init mxc_timer_init(struct clk *timer_clk) +void __init mxc_timer_init(struct clk *timer_clk, void __iomem *base, int irq) { uint32_t tctl_val; - int irq; clk_enable(timer_clk); - if (cpu_is_mx1()) { -#ifdef CONFIG_ARCH_MX1 - timer_base = IO_ADDRESS(TIM1_BASE_ADDR); - irq = TIM1_INT; -#endif - } else if (cpu_is_mx2()) { -#ifdef CONFIG_ARCH_MX2 - timer_base = IO_ADDRESS(GPT1_BASE_ADDR); - irq = MXC_INT_GPT1; -#endif - } else if (cpu_is_mx3()) { -#ifdef CONFIG_ARCH_MX3 - timer_base = IO_ADDRESS(GPT1_BASE_ADDR); - irq = MXC_INT_GPT; -#endif - } else - BUG(); + timer_base = base; /* * Initialise to a known state (all timers off, and timing reset) -- cgit v1.2.3 From be124c94279edf4306798100f120c386947d8724 Mon Sep 17 00:00:00 2001 From: Sascha Hauer Date: Thu, 4 Jun 2009 12:19:02 +0200 Subject: system.c: runtime base address Signed-off-by: Sascha Hauer --- arch/arm/mach-mx1/generic.c | 1 + arch/arm/mach-mx2/generic.c | 2 ++ arch/arm/mach-mx3/mm.c | 2 ++ arch/arm/plat-mxc/include/mach/common.h | 1 + arch/arm/plat-mxc/system.c | 22 +++++++++++++--------- 5 files changed, 19 insertions(+), 9 deletions(-) diff --git a/arch/arm/mach-mx1/generic.c b/arch/arm/mach-mx1/generic.c index 7622c9b38c9..bbb6c7b8766 100644 --- a/arch/arm/mach-mx1/generic.c +++ b/arch/arm/mach-mx1/generic.c @@ -41,6 +41,7 @@ static struct map_desc imx_io_desc[] __initdata = { void __init mx1_map_io(void) { mxc_set_cpu_type(MXC_CPU_MX1); + mxc_arch_reset_init(IO_ADDRESS(WDT_BASE_ADDR)); iotable_init(imx_io_desc, ARRAY_SIZE(imx_io_desc)); } diff --git a/arch/arm/mach-mx2/generic.c b/arch/arm/mach-mx2/generic.c index 169372f69d8..bdc5a6e67be 100644 --- a/arch/arm/mach-mx2/generic.c +++ b/arch/arm/mach-mx2/generic.c @@ -72,6 +72,7 @@ static struct map_desc mxc_io_desc[] __initdata = { void __init mx21_map_io(void) { mxc_set_cpu_type(MXC_CPU_MX21); + mxc_arch_reset_init(IO_ADDRESS(WDOG_BASE_ADDR)); iotable_init(mxc_io_desc, ARRAY_SIZE(mxc_io_desc)); } @@ -79,6 +80,7 @@ void __init mx21_map_io(void) void __init mx27_map_io(void) { mxc_set_cpu_type(MXC_CPU_MX27); + mxc_arch_reset_init(IO_ADDRESS(WDOG_BASE_ADDR)); iotable_init(mxc_io_desc, ARRAY_SIZE(mxc_io_desc)); } diff --git a/arch/arm/mach-mx3/mm.c b/arch/arm/mach-mx3/mm.c index 1f5fdd456cb..f0d5ae533b4 100644 --- a/arch/arm/mach-mx3/mm.c +++ b/arch/arm/mach-mx3/mm.c @@ -75,6 +75,7 @@ static struct map_desc mxc_io_desc[] __initdata = { void __init mx31_map_io(void) { mxc_set_cpu_type(MXC_CPU_MX31); + mxc_arch_reset_init(IO_ADDRESS(WDOG_BASE_ADDR)); iotable_init(mxc_io_desc, ARRAY_SIZE(mxc_io_desc)); } @@ -82,6 +83,7 @@ void __init mx31_map_io(void) void __init mx35_map_io(void) { mxc_set_cpu_type(MXC_CPU_MX35); + mxc_arch_reset_init(IO_ADDRESS(WDOG_BASE_ADDR)); iotable_init(mxc_io_desc, ARRAY_SIZE(mxc_io_desc)); } diff --git a/arch/arm/plat-mxc/include/mach/common.h b/arch/arm/plat-mxc/include/mach/common.h index 1c48aefe4b6..1dc31d6dd43 100644 --- a/arch/arm/plat-mxc/include/mach/common.h +++ b/arch/arm/plat-mxc/include/mach/common.h @@ -29,5 +29,6 @@ extern int mx35_clocks_init(void); extern int mxc_register_gpios(void); extern int mxc_register_device(struct platform_device *pdev, void *data); extern void mxc_set_cpu_type(unsigned int type); +extern void mxc_arch_reset_init(void __iomem *); #endif diff --git a/arch/arm/plat-mxc/system.c b/arch/arm/plat-mxc/system.c index 79c37577c91..15e30532f4a 100644 --- a/arch/arm/plat-mxc/system.c +++ b/arch/arm/plat-mxc/system.c @@ -30,29 +30,28 @@ #include #include -#ifdef CONFIG_ARCH_MX1 -#define WDOG_WCR_REG IO_ADDRESS(WDT_BASE_ADDR) -#define WDOG_WCR_ENABLE (1 << 0) -#else -#define WDOG_WCR_REG IO_ADDRESS(WDOG_BASE_ADDR) -#define WDOG_WCR_ENABLE (1 << 2) -#endif +static void __iomem *wdog_base; /* * Reset the system. It is called by machine_restart(). */ void arch_reset(char mode, const char *cmd) { - if (!cpu_is_mx1()) { + unsigned int wcr_enable; + + if (cpu_is_mx1()) { + wcr_enable = (1 << 0); + } else { struct clk *clk; clk = clk_get_sys("imx-wdt.0", NULL); if (!IS_ERR(clk)) clk_enable(clk); + wcr_enable = (1 << 2); } /* Assert SRS signal */ - __raw_writew(WDOG_WCR_ENABLE, WDOG_WCR_REG); + __raw_writew(wcr_enable, wdog_base); /* wait for reset to assert... */ mdelay(500); @@ -65,3 +64,8 @@ void arch_reset(char mode, const char *cmd) /* we'll take a jump through zero as a poor second */ cpu_reset(0); } + +void mxc_arch_reset_init(void __iomem *base) +{ + wdog_base = base; +} -- cgit v1.2.3 From abae61305684fffb0f1d779a1a678855ec5e8cfc Mon Sep 17 00:00:00 2001 From: Sascha Hauer Date: Mon, 25 May 2009 17:22:18 +0200 Subject: mxc: remove ARCH_NR_GPIOS Use the default value of 256 which is enough for all i.MX SoCs. Signed-off-by: Sascha Hauer --- arch/arm/plat-mxc/include/mach/mx27.h | 3 --- arch/arm/plat-mxc/include/mach/mx3x.h | 3 --- 2 files changed, 6 deletions(-) diff --git a/arch/arm/plat-mxc/include/mach/mx27.h b/arch/arm/plat-mxc/include/mach/mx27.h index 6e93f2c0b7b..063ac352465 100644 --- a/arch/arm/plat-mxc/include/mach/mx27.h +++ b/arch/arm/plat-mxc/include/mach/mx27.h @@ -120,7 +120,4 @@ extern int mx27_revision(void); /* Mandatory defines used globally */ -/* this CPU supports up to 192 GPIOs (don't forget the baseboard!) */ -#define ARCH_NR_GPIOS (192 + 16) - #endif /* __ASM_ARCH_MXC_MX27_H__ */ diff --git a/arch/arm/plat-mxc/include/mach/mx3x.h b/arch/arm/plat-mxc/include/mach/mx3x.h index b559a4bb576..44ca1b700f0 100644 --- a/arch/arm/plat-mxc/include/mach/mx3x.h +++ b/arch/arm/plat-mxc/include/mach/mx3x.h @@ -279,9 +279,6 @@ /* Mandatory defines used globally */ -/* this CPU supports up to 96 GPIOs */ -#define ARCH_NR_GPIOS 96 - #if !defined(__ASSEMBLY__) && !defined(__MXC_BOOT_UNCOMPRESS) extern unsigned int system_rev; -- cgit v1.2.3 From d30c74a02f7652e784c32a10736a3c88db98820c Mon Sep 17 00:00:00 2001 From: Sascha Hauer Date: Thu, 4 Jun 2009 13:29:57 +0200 Subject: MXC uncompress macros: determine uart base by machine type Signed-off-by: Sascha Hauer --- arch/arm/plat-mxc/include/mach/uncompress.h | 60 ++++++++++++++++++++--------- 1 file changed, 42 insertions(+), 18 deletions(-) diff --git a/arch/arm/plat-mxc/include/mach/uncompress.h b/arch/arm/plat-mxc/include/mach/uncompress.h index de6fe036598..98c8a60214d 100644 --- a/arch/arm/plat-mxc/include/mach/uncompress.h +++ b/arch/arm/plat-mxc/include/mach/uncompress.h @@ -26,8 +26,11 @@ #define __MXC_BOOT_UNCOMPRESS #include +#include -#define UART(x) (*(volatile unsigned long *)(serial_port + (x))) +static unsigned long uart_base; + +#define UART(x) (*(volatile unsigned long *)(uart_base + (x))) #define USR2 0x98 #define USR2_TXFE (1<<14) @@ -46,19 +49,10 @@ static void putc(int ch) { - static unsigned long serial_port = 0; - - if (unlikely(serial_port == 0)) { - do { - serial_port = UART1_BASE_ADDR; - if (UART(UCR1) & UCR1_UARTEN) - break; - serial_port = UART2_BASE_ADDR; - if (UART(UCR1) & UCR1_UARTEN) - break; - return; - } while (0); - } + if (!uart_base) + return; + if (!(UART(UCR1) & UCR1_UARTEN)) + return; while (!(UART(USR2) & USR2_TXFE)) barrier(); @@ -68,11 +62,41 @@ static void putc(int ch) #define flush() do { } while (0) -/* - * nothing to do - */ -#define arch_decomp_setup() +#define MX1_UART1_BASE_ADDR 0x00206000 +#define MX2X_UART1_BASE_ADDR 0x1000a000 +#define MX3X_UART1_BASE_ADDR 0x43F90000 + +static __inline__ void __arch_decomp_setup(unsigned long arch_id) +{ + switch (arch_id) { + case MACH_TYPE_MX1ADS: + case MACH_TYPE_SCB9328: + uart_base = MX1_UART1_BASE_ADDR; + break; + case MACH_TYPE_IMX27LITE: + case MACH_TYPE_MX27_3DS: + case MACH_TYPE_MX27ADS: + case MACH_TYPE_PCM038: + case MACH_TYPE_MX21ADS: + uart_base = MX2X_UART1_BASE_ADDR; + break; + case MACH_TYPE_MX31LITE: + case MACH_TYPE_ARMADILLO5X0: + case MACH_TYPE_MX31MOBOARD: + case MACH_TYPE_QONG: + case MACH_TYPE_MX31_3DS: + case MACH_TYPE_PCM037: + case MACH_TYPE_MX31ADS: + case MACH_TYPE_MX35_3DS: + case MACH_TYPE_PCM043: + uart_base = MX3X_UART1_BASE_ADDR; + break; + default: + break; + } +} +#define arch_decomp_setup() __arch_decomp_setup(arch_id) #define arch_decomp_wdog() #endif /* __ASM_ARCH_MXC_UNCOMPRESS_H__ */ -- cgit v1.2.3 From ccc1a6f8eebf0eb8a5bee16293d1dc9b5eab1be3 Mon Sep 17 00:00:00 2001 From: Sascha Hauer Date: Thu, 4 Jun 2009 13:45:37 +0200 Subject: MXC: remove board specific setup of MXC_LL_UART_[PV]ADDR Signed-off-by: Sascha Hauer --- .../arm/plat-mxc/include/mach/board-armadillo5x0.h | 7 --- arch/arm/plat-mxc/include/mach/board-mx21ads.h | 6 --- arch/arm/plat-mxc/include/mach/board-mx27ads.h | 6 --- arch/arm/plat-mxc/include/mach/board-mx27lite.h | 5 -- arch/arm/plat-mxc/include/mach/board-mx27pdk.h | 5 -- arch/arm/plat-mxc/include/mach/board-mx31ads.h | 5 -- arch/arm/plat-mxc/include/mach/board-mx31lilly.h | 5 -- arch/arm/plat-mxc/include/mach/board-mx31lite.h | 3 -- arch/arm/plat-mxc/include/mach/board-mx31moboard.h | 5 -- arch/arm/plat-mxc/include/mach/board-mx31pdk.h | 5 -- arch/arm/plat-mxc/include/mach/board-mx35pdk.h | 5 -- arch/arm/plat-mxc/include/mach/board-pcm037.h | 5 -- arch/arm/plat-mxc/include/mach/board-pcm038.h | 5 -- arch/arm/plat-mxc/include/mach/board-pcm043.h | 5 -- arch/arm/plat-mxc/include/mach/board-qong.h | 5 -- arch/arm/plat-mxc/include/mach/debug-macro.S | 59 ++++++++-------------- arch/arm/plat-mxc/include/mach/mx1.h | 4 -- 17 files changed, 21 insertions(+), 119 deletions(-) diff --git a/arch/arm/plat-mxc/include/mach/board-armadillo5x0.h b/arch/arm/plat-mxc/include/mach/board-armadillo5x0.h index 8769e910e55..0376c133c9f 100644 --- a/arch/arm/plat-mxc/include/mach/board-armadillo5x0.h +++ b/arch/arm/plat-mxc/include/mach/board-armadillo5x0.h @@ -12,11 +12,4 @@ #ifndef __ASM_ARCH_MXC_BOARD_ARMADILLO5X0_H__ #define __ASM_ARCH_MXC_BOARD_ARMADILLO5X0_H__ -#include - -/* mandatory for CONFIG_DEBUG_LL */ - -#define MXC_LL_UART_PADDR UART1_BASE_ADDR -#define MXC_LL_UART_VADDR AIPS1_IO_ADDRESS(UART1_BASE_ADDR) - #endif diff --git a/arch/arm/plat-mxc/include/mach/board-mx21ads.h b/arch/arm/plat-mxc/include/mach/board-mx21ads.h index 06701df74c4..0cf4fa29510 100644 --- a/arch/arm/plat-mxc/include/mach/board-mx21ads.h +++ b/arch/arm/plat-mxc/include/mach/board-mx21ads.h @@ -14,12 +14,6 @@ #ifndef __ASM_ARCH_MXC_BOARD_MX21ADS_H__ #define __ASM_ARCH_MXC_BOARD_MX21ADS_H__ -/* - * MXC UART EVB board level configurations - */ -#define MXC_LL_UART_PADDR UART1_BASE_ADDR -#define MXC_LL_UART_VADDR AIPI_IO_ADDRESS(UART1_BASE_ADDR) - /* * Memory-mapped I/O on MX21ADS base board */ diff --git a/arch/arm/plat-mxc/include/mach/board-mx27ads.h b/arch/arm/plat-mxc/include/mach/board-mx27ads.h index d42f4e6116f..7776d230327 100644 --- a/arch/arm/plat-mxc/include/mach/board-mx27ads.h +++ b/arch/arm/plat-mxc/include/mach/board-mx27ads.h @@ -25,12 +25,6 @@ #define MXC_MAX_BOARD_INTS (MXC_MAX_EXP_IO_LINES + \ MXC_MAX_VIRTUAL_INTS) -/* - * MXC UART EVB board level configurations - */ -#define MXC_LL_UART_PADDR UART1_BASE_ADDR -#define MXC_LL_UART_VADDR AIPI_IO_ADDRESS(UART1_BASE_ADDR) - /* * @name Memory Size parameters */ diff --git a/arch/arm/plat-mxc/include/mach/board-mx27lite.h b/arch/arm/plat-mxc/include/mach/board-mx27lite.h index a870f8ea244..ea87551d273 100644 --- a/arch/arm/plat-mxc/include/mach/board-mx27lite.h +++ b/arch/arm/plat-mxc/include/mach/board-mx27lite.h @@ -11,9 +11,4 @@ #ifndef __ASM_ARCH_MXC_BOARD_MX27LITE_H__ #define __ASM_ARCH_MXC_BOARD_MX27LITE_H__ -/* mandatory for CONFIG_DEBUG_LL */ - -#define MXC_LL_UART_PADDR UART1_BASE_ADDR -#define MXC_LL_UART_VADDR AIPS1_IO_ADDRESS(UART1_BASE_ADDR) - #endif /* __ASM_ARCH_MXC_BOARD_MX27LITE_H__ */ diff --git a/arch/arm/plat-mxc/include/mach/board-mx27pdk.h b/arch/arm/plat-mxc/include/mach/board-mx27pdk.h index 552b55d714d..fec1bcfa916 100644 --- a/arch/arm/plat-mxc/include/mach/board-mx27pdk.h +++ b/arch/arm/plat-mxc/include/mach/board-mx27pdk.h @@ -11,9 +11,4 @@ #ifndef __ASM_ARCH_MXC_BOARD_MX27PDK_H__ #define __ASM_ARCH_MXC_BOARD_MX27PDK_H__ -/* mandatory for CONFIG_DEBUG_LL */ - -#define MXC_LL_UART_PADDR UART1_BASE_ADDR -#define MXC_LL_UART_VADDR AIPS1_IO_ADDRESS(UART1_BASE_ADDR) - #endif /* __ASM_ARCH_MXC_BOARD_MX27PDK_H__ */ diff --git a/arch/arm/plat-mxc/include/mach/board-mx31ads.h b/arch/arm/plat-mxc/include/mach/board-mx31ads.h index 06e6895f7f6..2cbfa35e82f 100644 --- a/arch/arm/plat-mxc/include/mach/board-mx31ads.h +++ b/arch/arm/plat-mxc/include/mach/board-mx31ads.h @@ -114,9 +114,4 @@ #define MXC_MAX_EXP_IO_LINES 16 -/* mandatory for CONFIG_DEBUG_LL */ - -#define MXC_LL_UART_PADDR UART1_BASE_ADDR -#define MXC_LL_UART_VADDR AIPS1_IO_ADDRESS(UART1_BASE_ADDR) - #endif /* __ASM_ARCH_MXC_BOARD_MX31ADS_H__ */ diff --git a/arch/arm/plat-mxc/include/mach/board-mx31lilly.h b/arch/arm/plat-mxc/include/mach/board-mx31lilly.h index 78cf31e22e4..eb5a5024622 100644 --- a/arch/arm/plat-mxc/include/mach/board-mx31lilly.h +++ b/arch/arm/plat-mxc/include/mach/board-mx31lilly.h @@ -22,11 +22,6 @@ #ifndef __ASM_ARCH_MXC_BOARD_MX31LILLY_H__ #define __ASM_ARCH_MXC_BOARD_MX31LILLY_H__ -/* mandatory for CONFIG_LL_DEBUG */ - -#define MXC_LL_UART_PADDR UART1_BASE_ADDR -#define MXC_LL_UART_VADDR (AIPI_BASE_ADDR_VIRT + 0x0A000) - #ifndef __ASSEMBLY__ enum mx31lilly_boards { diff --git a/arch/arm/plat-mxc/include/mach/board-mx31lite.h b/arch/arm/plat-mxc/include/mach/board-mx31lite.h index 52fbdf2d6f2..8e64325d690 100644 --- a/arch/arm/plat-mxc/include/mach/board-mx31lite.h +++ b/arch/arm/plat-mxc/include/mach/board-mx31lite.h @@ -11,8 +11,5 @@ #ifndef __ASM_ARCH_MXC_BOARD_MX31LITE_H__ #define __ASM_ARCH_MXC_BOARD_MX31LITE_H__ -#define MXC_LL_UART_PADDR UART1_BASE_ADDR -#define MXC_LL_UART_VADDR AIPS1_IO_ADDRESS(UART1_BASE_ADDR) - #endif /* __ASM_ARCH_MXC_BOARD_MX31LITE_H__ */ diff --git a/arch/arm/plat-mxc/include/mach/board-mx31moboard.h b/arch/arm/plat-mxc/include/mach/board-mx31moboard.h index 303fd2434a2..d5be6b5a6ac 100644 --- a/arch/arm/plat-mxc/include/mach/board-mx31moboard.h +++ b/arch/arm/plat-mxc/include/mach/board-mx31moboard.h @@ -19,11 +19,6 @@ #ifndef __ASM_ARCH_MXC_BOARD_MX31MOBOARD_H__ #define __ASM_ARCH_MXC_BOARD_MX31MOBOARD_H__ -/* mandatory for CONFIG_DEBUG_LL */ - -#define MXC_LL_UART_PADDR UART1_BASE_ADDR -#define MXC_LL_UART_VADDR (AIPI_BASE_ADDR_VIRT + 0x0A000) - #ifndef __ASSEMBLY__ enum mx31moboard_boards { diff --git a/arch/arm/plat-mxc/include/mach/board-mx31pdk.h b/arch/arm/plat-mxc/include/mach/board-mx31pdk.h index 519bab3eb28..2bbd6ed17f5 100644 --- a/arch/arm/plat-mxc/include/mach/board-mx31pdk.h +++ b/arch/arm/plat-mxc/include/mach/board-mx31pdk.h @@ -11,11 +11,6 @@ #ifndef __ASM_ARCH_MXC_BOARD_MX31PDK_H__ #define __ASM_ARCH_MXC_BOARD_MX31PDK_H__ -/* mandatory for CONFIG_DEBUG_LL */ - -#define MXC_LL_UART_PADDR UART1_BASE_ADDR -#define MXC_LL_UART_VADDR AIPS1_IO_ADDRESS(UART1_BASE_ADDR) - /* Definitions for components on the Debug board */ /* Base address of CPLD controller on the Debug board */ diff --git a/arch/arm/plat-mxc/include/mach/board-mx35pdk.h b/arch/arm/plat-mxc/include/mach/board-mx35pdk.h index 1111037d6d9..383f1c04df0 100644 --- a/arch/arm/plat-mxc/include/mach/board-mx35pdk.h +++ b/arch/arm/plat-mxc/include/mach/board-mx35pdk.h @@ -19,9 +19,4 @@ #ifndef __ASM_ARCH_MXC_BOARD_MX35PDK_H__ #define __ASM_ARCH_MXC_BOARD_MX35PDK_H__ -/* mandatory for CONFIG_DEBUG_LL */ - -#define MXC_LL_UART_PADDR UART1_BASE_ADDR -#define MXC_LL_UART_VADDR AIPS1_IO_ADDRESS(UART1_BASE_ADDR) - #endif /* __ASM_ARCH_MXC_BOARD_MX35PDK_H__ */ diff --git a/arch/arm/plat-mxc/include/mach/board-pcm037.h b/arch/arm/plat-mxc/include/mach/board-pcm037.h index f0a1fa1938a..13411709b13 100644 --- a/arch/arm/plat-mxc/include/mach/board-pcm037.h +++ b/arch/arm/plat-mxc/include/mach/board-pcm037.h @@ -19,9 +19,4 @@ #ifndef __ASM_ARCH_MXC_BOARD_PCM037_H__ #define __ASM_ARCH_MXC_BOARD_PCM037_H__ -/* mandatory for CONFIG_DEBUG_LL */ - -#define MXC_LL_UART_PADDR UART1_BASE_ADDR -#define MXC_LL_UART_VADDR AIPS1_IO_ADDRESS(UART1_BASE_ADDR) - #endif /* __ASM_ARCH_MXC_BOARD_PCM037_H__ */ diff --git a/arch/arm/plat-mxc/include/mach/board-pcm038.h b/arch/arm/plat-mxc/include/mach/board-pcm038.h index 4fcd7499e09..410f9786ed2 100644 --- a/arch/arm/plat-mxc/include/mach/board-pcm038.h +++ b/arch/arm/plat-mxc/include/mach/board-pcm038.h @@ -19,11 +19,6 @@ #ifndef __ASM_ARCH_MXC_BOARD_PCM038_H__ #define __ASM_ARCH_MXC_BOARD_PCM038_H__ -/* mandatory for CONFIG_DEBUG_LL */ - -#define MXC_LL_UART_PADDR UART1_BASE_ADDR -#define MXC_LL_UART_VADDR (AIPI_BASE_ADDR_VIRT + 0x0A000) - #ifndef __ASSEMBLY__ /* * This CPU module needs a baseboard to work. After basic initializing diff --git a/arch/arm/plat-mxc/include/mach/board-pcm043.h b/arch/arm/plat-mxc/include/mach/board-pcm043.h index 15fbdf16abc..1ac4e1682e5 100644 --- a/arch/arm/plat-mxc/include/mach/board-pcm043.h +++ b/arch/arm/plat-mxc/include/mach/board-pcm043.h @@ -19,9 +19,4 @@ #ifndef __ASM_ARCH_MXC_BOARD_PCM043_H__ #define __ASM_ARCH_MXC_BOARD_PCM043_H__ -/* mandatory for CONFIG_LL_DEBUG */ - -#define MXC_LL_UART_PADDR UART1_BASE_ADDR -#define MXC_LL_UART_VADDR AIPS1_IO_ADDRESS(UART1_BASE_ADDR) - #endif /* __ASM_ARCH_MXC_BOARD_PCM043_H__ */ diff --git a/arch/arm/plat-mxc/include/mach/board-qong.h b/arch/arm/plat-mxc/include/mach/board-qong.h index 04033ec637d..6d88c7af4b2 100644 --- a/arch/arm/plat-mxc/include/mach/board-qong.h +++ b/arch/arm/plat-mxc/include/mach/board-qong.h @@ -11,11 +11,6 @@ #ifndef __ASM_ARCH_MXC_BOARD_QONG_H__ #define __ASM_ARCH_MXC_BOARD_QONG_H__ -/* mandatory for CONFIG_DEBUG_LL */ - -#define MXC_LL_UART_PADDR UART1_BASE_ADDR -#define MXC_LL_UART_VADDR AIPS1_IO_ADDRESS(UART1_BASE_ADDR) - /* NOR FLASH */ #define QONG_NOR_SIZE (128*1024*1024) diff --git a/arch/arm/plat-mxc/include/mach/debug-macro.S b/arch/arm/plat-mxc/include/mach/debug-macro.S index bbc5f6753cf..4f85acd74af 100644 --- a/arch/arm/plat-mxc/include/mach/debug-macro.S +++ b/arch/arm/plat-mxc/include/mach/debug-macro.S @@ -11,52 +11,35 @@ * */ -#include - -#ifdef CONFIG_MACH_MX31ADS -#include -#endif -#ifdef CONFIG_MACH_PCM037 -#include -#endif -#ifdef CONFIG_MACH_MX31LITE -#include -#endif -#ifdef CONFIG_MACH_MX27ADS -#include -#endif -#ifdef CONFIG_MACH_MX21ADS -#include -#endif -#ifdef CONFIG_MACH_PCM038 -#include +#ifdef CONFIG_ARCH_MX1 +#include +#define UART_PADDR UART1_BASE_ADDR +#define UART_VADDR IO_ADDRESS(UART1_BASE_ADDR) #endif -#ifdef CONFIG_MACH_MX31_3DS -#include -#endif -#ifdef CONFIG_MACH_QONG -#include -#endif -#ifdef CONFIG_MACH_PCM043 -#include -#endif -#ifdef CONFIG_MACH_MX27_3DS -#include + +#ifdef CONFIG_ARCH_MX2 +#ifdef UART_PADDR +#error "CONFIG_DEBUG_LL is incompatible with multiple archs" #endif -#ifdef CONFIG_MACH_ARMADILLO5X0 -#include +#include +#define UART_PADDR UART1_BASE_ADDR +#define UART_VADDR AIPI_IO_ADDRESS(UART1_BASE_ADDR) #endif -#ifdef CONFIG_MACH_MX35_3DS -#include + +#ifdef CONFIG_ARCH_MX3 +#ifdef UART_PADDR +#error "CONFIG_DEBUG_LL is incompatible with multiple archs" #endif -#ifdef CONFIG_MACH_MX27LITE -#include +#include +#define UART_PADDR UART1_BASE_ADDR +#define UART_VADDR AIPS1_IO_ADDRESS(UART1_BASE_ADDR) #endif + .macro addruart,rx mrc p15, 0, \rx, c1, c0 tst \rx, #1 @ MMU enabled? - ldreq \rx, =MXC_LL_UART_PADDR @ physical - ldrne \rx, =MXC_LL_UART_VADDR @ virtual + ldreq \rx, =UART_PADDR @ physical + ldrne \rx, =UART_VADDR @ virtual .endm .macro senduart,rd,rx diff --git a/arch/arm/plat-mxc/include/mach/mx1.h b/arch/arm/plat-mxc/include/mach/mx1.h index 1000bf330bc..786836965cf 100644 --- a/arch/arm/plat-mxc/include/mach/mx1.h +++ b/arch/arm/plat-mxc/include/mach/mx1.h @@ -179,8 +179,4 @@ #define DMA_REQ_UART1_T 30 #define DMA_REQ_UART1_R 31 -/* mandatory for CONFIG_DEBUG_LL */ -#define MXC_LL_UART_PADDR UART1_BASE_ADDR -#define MXC_LL_UART_VADDR IO_ADDRESS(UART1_BASE_ADDR) - #endif /* __ASM_ARCH_MXC_MX1_H__ */ -- cgit v1.2.3 From 37d6fb629eb272a91a3c43033f495a66da2392b5 Mon Sep 17 00:00:00 2001 From: Sascha Hauer Date: Wed, 27 May 2009 18:23:48 +0200 Subject: i.MX serial: do not use #ifdef CONFIG_ARCH_* Signed-off-by: Sascha Hauer --- drivers/serial/imx.c | 65 ++++++++++++++++++---------------------------------- 1 file changed, 22 insertions(+), 43 deletions(-) diff --git a/drivers/serial/imx.c b/drivers/serial/imx.c index 5d7b58f1fe4..7485afd0df4 100644 --- a/drivers/serial/imx.c +++ b/drivers/serial/imx.c @@ -67,21 +67,8 @@ #define UBIR 0xa4 /* BRM Incremental Register */ #define UBMR 0xa8 /* BRM Modulator Register */ #define UBRC 0xac /* Baud Rate Count Register */ -#if defined CONFIG_ARCH_MX3 || defined CONFIG_ARCH_MX2 -#define ONEMS 0xb0 /* One Millisecond register */ -#define UTS 0xb4 /* UART Test Register */ -#endif -#ifdef CONFIG_ARCH_MX1 -#define BIPR1 0xb0 /* Incremental Preset Register 1 */ -#define BIPR2 0xb4 /* Incremental Preset Register 2 */ -#define BIPR3 0xb8 /* Incremental Preset Register 3 */ -#define BIPR4 0xbc /* Incremental Preset Register 4 */ -#define BMPR1 0xc0 /* BRM Modulator Register 1 */ -#define BMPR2 0xc4 /* BRM Modulator Register 2 */ -#define BMPR3 0xc8 /* BRM Modulator Register 3 */ -#define BMPR4 0xcc /* BRM Modulator Register 4 */ -#define UTS 0xd0 /* UART Test Register */ -#endif +#define MX2_ONEMS 0xb0 /* One Millisecond register */ +#define UTS (cpu_is_mx1() ? 0xd0 : 0xb4) /* UART Test Register */ /* UART Control Register Bit Fields.*/ #define URXD_CHARRDY (1<<15) @@ -101,12 +88,7 @@ #define UCR1_RTSDEN (1<<5) /* RTS delta interrupt enable */ #define UCR1_SNDBRK (1<<4) /* Send break */ #define UCR1_TDMAEN (1<<3) /* Transmitter ready DMA enable */ -#ifdef CONFIG_ARCH_MX1 -#define UCR1_UARTCLKEN (1<<2) /* UART clock enabled */ -#endif -#if defined CONFIG_ARCH_MX3 || defined CONFIG_ARCH_MX2 -#define UCR1_UARTCLKEN (0) /* not present on mx2/mx3 */ -#endif +#define MX1_UCR1_UARTCLKEN (1<<2) /* UART clock enabled, mx1 only */ #define UCR1_DOZE (1<<1) /* Doze */ #define UCR1_UARTEN (1<<0) /* UART enabled */ #define UCR2_ESCI (1<<15) /* Escape seq interrupt enable */ @@ -132,13 +114,9 @@ #define UCR3_RXDSEN (1<<6) /* Receive status interrupt enable */ #define UCR3_AIRINTEN (1<<5) /* Async IR wake interrupt enable */ #define UCR3_AWAKEN (1<<4) /* Async wake interrupt enable */ -#ifdef CONFIG_ARCH_MX1 -#define UCR3_REF25 (1<<3) /* Ref freq 25 MHz, only on mx1 */ -#define UCR3_REF30 (1<<2) /* Ref Freq 30 MHz, only on mx1 */ -#endif -#if defined CONFIG_ARCH_MX2 || defined CONFIG_ARCH_MX3 -#define UCR3_RXDMUXSEL (1<<2) /* RXD Muxed Input Select, on mx2/mx3 */ -#endif +#define MX1_UCR3_REF25 (1<<3) /* Ref freq 25 MHz, only on mx1 */ +#define MX1_UCR3_REF30 (1<<2) /* Ref Freq 30 MHz, only on mx1 */ +#define MX2_UCR3_RXDMUXSEL (1<<2) /* RXD Muxed Input Select, on mx2/mx3 */ #define UCR3_INVT (1<<1) /* Inverted Infrared transmission */ #define UCR3_BPEN (1<<0) /* Preset registers enable */ #define UCR4_CTSTL_32 (32<<10) /* CTS trigger level (32 chars) */ @@ -186,12 +164,10 @@ #define UTS_SOFTRST (1<<0) /* Software reset */ /* We've been assigned a range on the "Low-density serial ports" major */ -#ifdef CONFIG_ARCH_MXC #define SERIAL_IMX_MAJOR 207 #define MINOR_START 16 #define DEV_NAME "ttymxc" #define MAX_INTERNAL_IRQ MXC_INTERNAL_IRQS -#endif /* * This determines how often we check the modem status signals @@ -706,11 +682,11 @@ static int imx_startup(struct uart_port *port) } } -#if defined CONFIG_ARCH_MX2 || defined CONFIG_ARCH_MX3 - temp = readl(sport->port.membase + UCR3); - temp |= UCR3_RXDMUXSEL; - writel(temp, sport->port.membase + UCR3); -#endif + if (!cpu_is_mx1()) { + temp = readl(sport->port.membase + UCR3); + temp |= MX2_UCR3_RXDMUXSEL; + writel(temp, sport->port.membase + UCR3); + } if (USE_IRDA(sport)) { temp = readl(sport->port.membase + UCR4); @@ -942,9 +918,9 @@ imx_set_termios(struct uart_port *port, struct ktermios *termios, writel(num, sport->port.membase + UBIR); writel(denom, sport->port.membase + UBMR); -#ifdef ONEMS - writel(sport->port.uartclk / div / 1000, sport->port.membase + ONEMS); -#endif + if (!cpu_is_mx1()) + writel(sport->port.uartclk / div / 1000, + sport->port.membase + MX2_ONEMS); writel(old_ucr1, sport->port.membase + UCR1); @@ -1074,17 +1050,20 @@ static void imx_console_write(struct console *co, const char *s, unsigned int count) { struct imx_port *sport = imx_ports[co->index]; - unsigned int old_ucr1, old_ucr2; + unsigned int old_ucr1, old_ucr2, ucr1; /* * First, save UCR1/2 and then disable interrupts */ - old_ucr1 = readl(sport->port.membase + UCR1); + ucr1 = old_ucr1 = readl(sport->port.membase + UCR1); old_ucr2 = readl(sport->port.membase + UCR2); - writel((old_ucr1 | UCR1_UARTCLKEN | UCR1_UARTEN) & - ~(UCR1_TXMPTYEN | UCR1_RRDYEN | UCR1_RTSDEN), - sport->port.membase + UCR1); + if (cpu_is_mx1()) + ucr1 |= MX1_UCR1_UARTCLKEN; + ucr1 |= UCR1_UARTEN; + ucr1 &= ~(UCR1_TXMPTYEN | UCR1_RRDYEN | UCR1_RTSDEN); + + writel(ucr1, sport->port.membase + UCR1); writel(old_ucr2 | UCR2_TXEN, sport->port.membase + UCR2); -- cgit v1.2.3 From 12308dfe3776ff5741fc675f2a352165e1628098 Mon Sep 17 00:00:00 2001 From: Sascha Hauer Date: Wed, 27 May 2009 18:33:58 +0200 Subject: mxc: remove do not include directly Everyone should be free to include the files he actually needs. Signed-off-by: Sascha Hauer --- arch/arm/plat-mxc/include/mach/mx1.h | 4 ---- arch/arm/plat-mxc/include/mach/mx21.h | 5 ----- arch/arm/plat-mxc/include/mach/mx27.h | 4 ---- arch/arm/plat-mxc/include/mach/mx2x.h | 4 ---- arch/arm/plat-mxc/include/mach/mx3x.h | 4 ---- 5 files changed, 21 deletions(-) diff --git a/arch/arm/plat-mxc/include/mach/mx1.h b/arch/arm/plat-mxc/include/mach/mx1.h index 786836965cf..ee60d64728c 100644 --- a/arch/arm/plat-mxc/include/mach/mx1.h +++ b/arch/arm/plat-mxc/include/mach/mx1.h @@ -12,10 +12,6 @@ #ifndef __ASM_ARCH_MXC_MX1_H__ #define __ASM_ARCH_MXC_MX1_H__ -#ifndef __ASM_ARCH_MXC_HARDWARE_H__ -#error "Do not include directly." -#endif - #include /* diff --git a/arch/arm/plat-mxc/include/mach/mx21.h b/arch/arm/plat-mxc/include/mach/mx21.h index 8b070a041a9..21112c695ec 100644 --- a/arch/arm/plat-mxc/include/mach/mx21.h +++ b/arch/arm/plat-mxc/include/mach/mx21.h @@ -25,11 +25,6 @@ #ifndef __ASM_ARCH_MXC_MX21_H__ #define __ASM_ARCH_MXC_MX21_H__ -#ifndef __ASM_ARCH_MXC_HARDWARE_H__ -#error "Do not include directly." -#endif - - /* Memory regions and CS */ #define SDRAM_BASE_ADDR 0xC0000000 #define CSD1_BASE_ADDR 0xC4000000 diff --git a/arch/arm/plat-mxc/include/mach/mx27.h b/arch/arm/plat-mxc/include/mach/mx27.h index 063ac352465..dc3ad9aa952 100644 --- a/arch/arm/plat-mxc/include/mach/mx27.h +++ b/arch/arm/plat-mxc/include/mach/mx27.h @@ -24,10 +24,6 @@ #ifndef __ASM_ARCH_MXC_MX27_H__ #define __ASM_ARCH_MXC_MX27_H__ -#ifndef __ASM_ARCH_MXC_HARDWARE_H__ -#error "Do not include directly." -#endif - /* IRAM */ #define IRAM_BASE_ADDR 0xFFFF4C00 /* internal ram */ diff --git a/arch/arm/plat-mxc/include/mach/mx2x.h b/arch/arm/plat-mxc/include/mach/mx2x.h index fc40d3ab8c5..5982ae5a00d 100644 --- a/arch/arm/plat-mxc/include/mach/mx2x.h +++ b/arch/arm/plat-mxc/include/mach/mx2x.h @@ -23,10 +23,6 @@ #ifndef __ASM_ARCH_MXC_MX2x_H__ #define __ASM_ARCH_MXC_MX2x_H__ -#ifndef __ASM_ARCH_MXC_HARDWARE_H__ -#error "Do not include directly." -#endif - /* The following addresses are common between i.MX21 and i.MX27 */ /* Register offests */ diff --git a/arch/arm/plat-mxc/include/mach/mx3x.h b/arch/arm/plat-mxc/include/mach/mx3x.h index 44ca1b700f0..16f68e8f4cf 100644 --- a/arch/arm/plat-mxc/include/mach/mx3x.h +++ b/arch/arm/plat-mxc/include/mach/mx3x.h @@ -11,10 +11,6 @@ #ifndef __ASM_ARCH_MXC_MX31_H__ #define __ASM_ARCH_MXC_MX31_H__ -#ifndef __ASM_ARCH_MXC_HARDWARE_H__ -#error "Do not include directly." -#endif - /* * MX31 memory map: * -- cgit v1.2.3 From c5aa0ad0c557c63dcaf8c8d75a3dd4c5e90724b3 Mon Sep 17 00:00:00 2001 From: Sascha Hauer Date: Mon, 25 May 2009 17:36:19 +0200 Subject: mxc: turn to soc specific init_irq functions Signed-off-by: Sascha Hauer --- arch/arm/mach-mx1/generic.c | 6 ++++++ arch/arm/mach-mx1/mx1ads.c | 4 ++-- arch/arm/mach-mx1/scb9328.c | 2 +- arch/arm/mach-mx2/generic.c | 10 ++++++++++ arch/arm/mach-mx2/mx21ads.c | 2 +- arch/arm/mach-mx2/mx27ads.c | 2 +- arch/arm/mach-mx2/mx27lite.c | 2 +- arch/arm/mach-mx2/mx27pdk.c | 2 +- arch/arm/mach-mx2/pcm038.c | 2 +- arch/arm/mach-mx3/armadillo5x0.c | 2 +- arch/arm/mach-mx3/mm.c | 10 ++++++++++ arch/arm/mach-mx3/mx31ads.c | 2 +- arch/arm/mach-mx3/mx31lilly.c | 2 +- arch/arm/mach-mx3/mx31lite.c | 2 +- arch/arm/mach-mx3/mx31moboard.c | 3 ++- arch/arm/mach-mx3/mx31pdk.c | 2 +- arch/arm/mach-mx3/mx35pdk.c | 2 +- arch/arm/mach-mx3/pcm037.c | 2 +- arch/arm/mach-mx3/pcm043.c | 2 +- arch/arm/mach-mx3/qong.c | 2 +- arch/arm/plat-mxc/include/mach/common.h | 7 ++++++- arch/arm/plat-mxc/irq.c | 4 ++-- 22 files changed, 53 insertions(+), 21 deletions(-) diff --git a/arch/arm/mach-mx1/generic.c b/arch/arm/mach-mx1/generic.c index bbb6c7b8766..7f9fc1034c0 100644 --- a/arch/arm/mach-mx1/generic.c +++ b/arch/arm/mach-mx1/generic.c @@ -45,3 +45,9 @@ void __init mx1_map_io(void) iotable_init(imx_io_desc, ARRAY_SIZE(imx_io_desc)); } + +void __init mx1_init_irq(void) +{ + mxc_init_irq(IO_ADDRESS(AVIC_BASE_ADDR)); +} + diff --git a/arch/arm/mach-mx1/mx1ads.c b/arch/arm/mach-mx1/mx1ads.c index e5b0c0a83c3..6af064d19b0 100644 --- a/arch/arm/mach-mx1/mx1ads.c +++ b/arch/arm/mach-mx1/mx1ads.c @@ -151,7 +151,7 @@ MACHINE_START(MX1ADS, "Freescale MX1ADS") .io_pg_offst = (IMX_IO_BASE >> 18) & 0xfffc, .boot_params = PHYS_OFFSET + 0x100, .map_io = mx1_map_io, - .init_irq = mxc_init_irq, + .init_irq = mx1_init_irq, .timer = &mx1ads_timer, .init_machine = mx1ads_init, MACHINE_END @@ -161,7 +161,7 @@ MACHINE_START(MXLADS, "Freescale MXLADS") .io_pg_offst = (IMX_IO_BASE >> 18) & 0xfffc, .boot_params = PHYS_OFFSET + 0x100, .map_io = mx1_map_io, - .init_irq = mxc_init_irq, + .init_irq = mx1_init_irq, .timer = &mx1ads_timer, .init_machine = mx1ads_init, MACHINE_END diff --git a/arch/arm/mach-mx1/scb9328.c b/arch/arm/mach-mx1/scb9328.c index 20e0b5bcdff..125d495e9c7 100644 --- a/arch/arm/mach-mx1/scb9328.c +++ b/arch/arm/mach-mx1/scb9328.c @@ -154,7 +154,7 @@ MACHINE_START(SCB9328, "Synertronixx scb9328") .io_pg_offst = ((0xe0200000) >> 18) & 0xfffc, .boot_params = 0x08000100, .map_io = mx1_map_io, - .init_irq = mxc_init_irq, + .init_irq = mx1_init_irq, .timer = &scb9328_timer, .init_machine = scb9328_init, MACHINE_END diff --git a/arch/arm/mach-mx2/generic.c b/arch/arm/mach-mx2/generic.c index bdc5a6e67be..ae8f759134d 100644 --- a/arch/arm/mach-mx2/generic.c +++ b/arch/arm/mach-mx2/generic.c @@ -85,3 +85,13 @@ void __init mx27_map_io(void) iotable_init(mxc_io_desc, ARRAY_SIZE(mxc_io_desc)); } +void __init mx27_init_irq(void) +{ + mxc_init_irq(IO_ADDRESS(AVIC_BASE_ADDR)); +} + +void __init mx21_init_irq(void) +{ + mx27_init_irq(); +} + diff --git a/arch/arm/mach-mx2/mx21ads.c b/arch/arm/mach-mx2/mx21ads.c index a5ee461cb40..a525783ceea 100644 --- a/arch/arm/mach-mx2/mx21ads.c +++ b/arch/arm/mach-mx2/mx21ads.c @@ -280,7 +280,7 @@ MACHINE_START(MX21ADS, "Freescale i.MX21ADS") .io_pg_offst = ((AIPI_BASE_ADDR_VIRT) >> 18) & 0xfffc, .boot_params = PHYS_OFFSET + 0x100, .map_io = mx21ads_map_io, - .init_irq = mxc_init_irq, + .init_irq = mx21_init_irq, .init_machine = mx21ads_board_init, .timer = &mx21ads_timer, MACHINE_END diff --git a/arch/arm/mach-mx2/mx27ads.c b/arch/arm/mach-mx2/mx27ads.c index 02daddac699..a9f69eb58b7 100644 --- a/arch/arm/mach-mx2/mx27ads.c +++ b/arch/arm/mach-mx2/mx27ads.c @@ -330,7 +330,7 @@ MACHINE_START(MX27ADS, "Freescale i.MX27ADS") .io_pg_offst = ((AIPI_BASE_ADDR_VIRT) >> 18) & 0xfffc, .boot_params = PHYS_OFFSET + 0x100, .map_io = mx27ads_map_io, - .init_irq = mxc_init_irq, + .init_irq = mx27_init_irq, .init_machine = mx27ads_board_init, .timer = &mx27ads_timer, MACHINE_END diff --git a/arch/arm/mach-mx2/mx27lite.c b/arch/arm/mach-mx2/mx27lite.c index 3ae11cb8c04..82ea227ea0c 100644 --- a/arch/arm/mach-mx2/mx27lite.c +++ b/arch/arm/mach-mx2/mx27lite.c @@ -89,7 +89,7 @@ MACHINE_START(IMX27LITE, "LogicPD i.MX27LITE") .io_pg_offst = ((AIPI_BASE_ADDR_VIRT) >> 18) & 0xfffc, .boot_params = PHYS_OFFSET + 0x100, .map_io = mx27_map_io, - .init_irq = mxc_init_irq, + .init_irq = mx27_init_irq, .init_machine = mx27lite_init, .timer = &mx27lite_timer, MACHINE_END diff --git a/arch/arm/mach-mx2/mx27pdk.c b/arch/arm/mach-mx2/mx27pdk.c index 1d9238c7a6c..6761d1b79e4 100644 --- a/arch/arm/mach-mx2/mx27pdk.c +++ b/arch/arm/mach-mx2/mx27pdk.c @@ -89,7 +89,7 @@ MACHINE_START(MX27_3DS, "Freescale MX27PDK") .io_pg_offst = ((AIPI_BASE_ADDR_VIRT) >> 18) & 0xfffc, .boot_params = PHYS_OFFSET + 0x100, .map_io = mx27_map_io, - .init_irq = mxc_init_irq, + .init_irq = mx27_init_irq, .init_machine = mx27pdk_init, .timer = &mx27pdk_timer, MACHINE_END diff --git a/arch/arm/mach-mx2/pcm038.c b/arch/arm/mach-mx2/pcm038.c index a4628d00434..638d078304c 100644 --- a/arch/arm/mach-mx2/pcm038.c +++ b/arch/arm/mach-mx2/pcm038.c @@ -241,7 +241,7 @@ MACHINE_START(PCM038, "phyCORE-i.MX27") .io_pg_offst = ((AIPI_BASE_ADDR_VIRT) >> 18) & 0xfffc, .boot_params = PHYS_OFFSET + 0x100, .map_io = mx27_map_io, - .init_irq = mxc_init_irq, + .init_irq = mx27_init_irq, .init_machine = pcm038_init, .timer = &pcm038_timer, MACHINE_END diff --git a/arch/arm/mach-mx3/armadillo5x0.c b/arch/arm/mach-mx3/armadillo5x0.c index ee331fd6b1b..776c0ee1b3c 100644 --- a/arch/arm/mach-mx3/armadillo5x0.c +++ b/arch/arm/mach-mx3/armadillo5x0.c @@ -352,7 +352,7 @@ MACHINE_START(ARMADILLO5X0, "Armadillo-500") .io_pg_offst = ((AIPS1_BASE_ADDR_VIRT) >> 18) & 0xfffc, .boot_params = PHYS_OFFSET + 0x00000100, .map_io = mx31_map_io, - .init_irq = mxc_init_irq, + .init_irq = mx31_init_irq, .timer = &armadillo5x0_timer, .init_machine = armadillo5x0_init, MACHINE_END diff --git a/arch/arm/mach-mx3/mm.c b/arch/arm/mach-mx3/mm.c index f0d5ae533b4..c327172159c 100644 --- a/arch/arm/mach-mx3/mm.c +++ b/arch/arm/mach-mx3/mm.c @@ -88,6 +88,16 @@ void __init mx35_map_io(void) iotable_init(mxc_io_desc, ARRAY_SIZE(mxc_io_desc)); } +void __init mx31_init_irq(void) +{ + mxc_init_irq(IO_ADDRESS(AVIC_BASE_ADDR)); +} + +void __init mx35_init_irq(void) +{ + mx31_init_irq(); +} + #ifdef CONFIG_CACHE_L2X0 static int mxc_init_l2x0(void) { diff --git a/arch/arm/mach-mx3/mx31ads.c b/arch/arm/mach-mx3/mx31ads.c index 30e2767a78a..0497c152be1 100644 --- a/arch/arm/mach-mx3/mx31ads.c +++ b/arch/arm/mach-mx3/mx31ads.c @@ -517,7 +517,7 @@ static void __init mx31ads_map_io(void) static void __init mx31ads_init_irq(void) { - mxc_init_irq(); + mx31_init_irq(); mx31ads_init_expio(); } diff --git a/arch/arm/mach-mx3/mx31lilly.c b/arch/arm/mach-mx3/mx31lilly.c index 6ab2f163cb9..423025150f6 100644 --- a/arch/arm/mach-mx3/mx31lilly.c +++ b/arch/arm/mach-mx3/mx31lilly.c @@ -148,7 +148,7 @@ MACHINE_START(LILLY1131, "INCO startec LILLY-1131") .io_pg_offst = ((AIPS1_BASE_ADDR_VIRT) >> 18) & 0xfffc, .boot_params = PHYS_OFFSET + 0x100, .map_io = mx31_map_io, - .init_irq = mxc_init_irq, + .init_irq = mx31_init_irq, .init_machine = mx31lilly_board_init, .timer = &mx31lilly_timer, MACHINE_END diff --git a/arch/arm/mach-mx3/mx31lite.c b/arch/arm/mach-mx3/mx31lite.c index 86fe70fa3e1..b1c0afc40cf 100644 --- a/arch/arm/mach-mx3/mx31lite.c +++ b/arch/arm/mach-mx3/mx31lite.c @@ -162,7 +162,7 @@ MACHINE_START(MX31LITE, "LogicPD MX31 LITEKIT") .io_pg_offst = ((AIPS1_BASE_ADDR_VIRT) >> 18) & 0xfffc, .boot_params = PHYS_OFFSET + 0x100, .map_io = mx31lite_map_io, - .init_irq = mxc_init_irq, + .init_irq = mx31_init_irq, .init_machine = mxc_board_init, .timer = &mx31lite_timer, MACHINE_END diff --git a/arch/arm/mach-mx3/mx31moboard.c b/arch/arm/mach-mx3/mx31moboard.c index a17f2e41160..b86b8a757c9 100644 --- a/arch/arm/mach-mx3/mx31moboard.c +++ b/arch/arm/mach-mx3/mx31moboard.c @@ -36,6 +36,7 @@ #include #include #include +#include #include "devices.h" @@ -197,7 +198,7 @@ MACHINE_START(MX31MOBOARD, "EPFL Mobots mx31moboard") .io_pg_offst = ((AIPS1_BASE_ADDR_VIRT) >> 18) & 0xfffc, .boot_params = PHYS_OFFSET + 0x100, .map_io = mx31_map_io, - .init_irq = mxc_init_irq, + .init_irq = mx31_init_irq, .init_machine = mxc_board_init, .timer = &mx31moboard_timer, MACHINE_END diff --git a/arch/arm/mach-mx3/mx31pdk.c b/arch/arm/mach-mx3/mx31pdk.c index c19838d2e36..0f7a2f06bc2 100644 --- a/arch/arm/mach-mx3/mx31pdk.c +++ b/arch/arm/mach-mx3/mx31pdk.c @@ -265,7 +265,7 @@ MACHINE_START(MX31_3DS, "Freescale MX31PDK (3DS)") .io_pg_offst = ((AIPS1_BASE_ADDR_VIRT) >> 18) & 0xfffc, .boot_params = PHYS_OFFSET + 0x100, .map_io = mx31pdk_map_io, - .init_irq = mxc_init_irq, + .init_irq = mx31_init_irq, .init_machine = mxc_board_init, .timer = &mx31pdk_timer, MACHINE_END diff --git a/arch/arm/mach-mx3/mx35pdk.c b/arch/arm/mach-mx3/mx35pdk.c index 6d15374414b..6ff186e46ce 100644 --- a/arch/arm/mach-mx3/mx35pdk.c +++ b/arch/arm/mach-mx3/mx35pdk.c @@ -98,7 +98,7 @@ MACHINE_START(MX35_3DS, "Freescale MX35PDK") .io_pg_offst = ((AIPS1_BASE_ADDR_VIRT) >> 18) & 0xfffc, .boot_params = PHYS_OFFSET + 0x100, .map_io = mx35_map_io, - .init_irq = mxc_init_irq, + .init_irq = mx35_init_irq, .init_machine = mxc_board_init, .timer = &mx35pdk_timer, MACHINE_END diff --git a/arch/arm/mach-mx3/pcm037.c b/arch/arm/mach-mx3/pcm037.c index 840cfda341d..d8472206de9 100644 --- a/arch/arm/mach-mx3/pcm037.c +++ b/arch/arm/mach-mx3/pcm037.c @@ -592,7 +592,7 @@ MACHINE_START(PCM037, "Phytec Phycore pcm037") .io_pg_offst = ((AIPS1_BASE_ADDR_VIRT) >> 18) & 0xfffc, .boot_params = PHYS_OFFSET + 0x100, .map_io = mx31_map_io, - .init_irq = mxc_init_irq, + .init_irq = mx31_init_irq, .init_machine = mxc_board_init, .timer = &pcm037_timer, MACHINE_END diff --git a/arch/arm/mach-mx3/pcm043.c b/arch/arm/mach-mx3/pcm043.c index 8d27c324abf..7c7d3cc07b8 100644 --- a/arch/arm/mach-mx3/pcm043.c +++ b/arch/arm/mach-mx3/pcm043.c @@ -245,7 +245,7 @@ MACHINE_START(PCM043, "Phytec Phycore pcm043") .io_pg_offst = ((AIPS1_BASE_ADDR_VIRT) >> 18) & 0xfffc, .boot_params = PHYS_OFFSET + 0x100, .map_io = mx35_map_io, - .init_irq = mxc_init_irq, + .init_irq = mx35_init_irq, .init_machine = mxc_board_init, .timer = &pcm043_timer, MACHINE_END diff --git a/arch/arm/mach-mx3/qong.c b/arch/arm/mach-mx3/qong.c index 82b31c4ab11..0bca4d914ab 100644 --- a/arch/arm/mach-mx3/qong.c +++ b/arch/arm/mach-mx3/qong.c @@ -280,7 +280,7 @@ MACHINE_START(QONG, "Dave/DENX QongEVB-LITE") .io_pg_offst = ((AIPS1_BASE_ADDR_VIRT) >> 18) & 0xfffc, .boot_params = PHYS_OFFSET + 0x100, .map_io = mx31_map_io, - .init_irq = mxc_init_irq, + .init_irq = mx31_init_irq, .init_machine = mxc_board_init, .timer = &qong_timer, MACHINE_END diff --git a/arch/arm/plat-mxc/include/mach/common.h b/arch/arm/plat-mxc/include/mach/common.h index 1dc31d6dd43..cd8f215c1ad 100644 --- a/arch/arm/plat-mxc/include/mach/common.h +++ b/arch/arm/plat-mxc/include/mach/common.h @@ -19,7 +19,12 @@ extern void mx21_map_io(void); extern void mx27_map_io(void); extern void mx31_map_io(void); extern void mx35_map_io(void); -extern void mxc_init_irq(void); +extern void mxc_init_irq(void __iomem *); +extern void mx1_init_irq(void); +extern void mx21_init_irq(void); +extern void mx27_init_irq(void); +extern void mx31_init_irq(void); +extern void mx35_init_irq(void); extern void mxc_timer_init(struct clk *timer_clk, void __iomem *, int); extern int mx1_clocks_init(unsigned long fref); extern int mx21_clocks_init(unsigned long lref, unsigned long fref); diff --git a/arch/arm/plat-mxc/irq.c b/arch/arm/plat-mxc/irq.c index 8aee76304f8..618a8b24ed1 100644 --- a/arch/arm/plat-mxc/irq.c +++ b/arch/arm/plat-mxc/irq.c @@ -113,11 +113,11 @@ static struct irq_chip mxc_avic_chip = { * interrupts. It registers the interrupt enable and disable functions * to the kernel for each interrupt source. */ -void __init mxc_init_irq(void) +void __init mxc_init_irq(void __iomem *irqbase) { int i; - avic_base = IO_ADDRESS(AVIC_BASE_ADDR); + avic_base = irqbase; /* put the AVIC into the reset value with * all interrupts disabled -- cgit v1.2.3 From 997d74b18ae1d0d8f4c4469a5d1ce8d73ca8402c Mon Sep 17 00:00:00 2001 From: Sascha Hauer Date: Thu, 4 Jun 2009 10:32:08 +0200 Subject: MXC iomux-v3: Fix defines for PAD_CTL registers The old defines leaked in from an old version of the patch. Change the defines to match the register layout of the iomuxer. Signed-off-by: Sascha Hauer --- arch/arm/plat-mxc/include/mach/iomux-v3.h | 30 +++++++++++++----------------- 1 file changed, 13 insertions(+), 17 deletions(-) diff --git a/arch/arm/plat-mxc/include/mach/iomux-v3.h b/arch/arm/plat-mxc/include/mach/iomux-v3.h index 7cd84547658..cd06df9370c 100644 --- a/arch/arm/plat-mxc/include/mach/iomux-v3.h +++ b/arch/arm/plat-mxc/include/mach/iomux-v3.h @@ -68,28 +68,24 @@ struct pad_desc { /* * Use to set PAD control */ -#define PAD_CTL_DRIVE_VOLTAGE_3_3_V 0 -#define PAD_CTL_DRIVE_VOLTAGE_1_8_V 1 -#define PAD_CTL_NO_HYSTERESIS 0 -#define PAD_CTL_HYSTERESIS 1 +#define PAD_CTL_DVS (1 << 13) +#define PAD_CTL_HYS (1 << 8) -#define PAD_CTL_PULL_DISABLED 0x0 -#define PAD_CTL_PULL_KEEPER 0xa -#define PAD_CTL_PULL_DOWN_100K 0xc -#define PAD_CTL_PULL_UP_47K 0xd -#define PAD_CTL_PULL_UP_100K 0xe -#define PAD_CTL_PULL_UP_22K 0xf +#define PAD_CTL_PKE (1 << 7) +#define PAD_CTL_PUE (1 << 6) +#define PAD_CTL_PUS_100K_DOWN (0 << 4) +#define PAD_CTL_PUS_47K_UP (1 << 4) +#define PAD_CTL_PUS_100K_UP (2 << 4) +#define PAD_CTL_PUS_22K_UP (3 << 4) -#define PAD_CTL_OUTPUT_CMOS 0 -#define PAD_CTL_OUTPUT_OPEN_DRAIN 1 +#define PAD_CTL_ODE (1 << 3) -#define PAD_CTL_DRIVE_STRENGTH_NORM 0 -#define PAD_CTL_DRIVE_STRENGTH_HIGH 1 -#define PAD_CTL_DRIVE_STRENGTH_MAX 2 +#define PAD_CTL_DSE_STANDARD (0 << 1) +#define PAD_CTL_DSE_HIGH (1 << 1) +#define PAD_CTL_DSE_MAX (2 << 1) -#define PAD_CTL_SLEW_RATE_SLOW 0 -#define PAD_CTL_SLEW_RATE_FAST 1 +#define PAD_CTL_SRE_FAST (1 << 0) /* * setups a single pad: -- cgit v1.2.3 From aa68c02777702f05ea5f075e3001288c30ffcb1c Mon Sep 17 00:00:00 2001 From: Sascha Hauer Date: Tue, 23 Jun 2009 11:52:26 +0200 Subject: mx2: remove mxc_irda platform device Irda support is handled by the normal ims serial driver, so we do not need this device. Signed-off-by: Sascha Hauer --- arch/arm/mach-mx2/devices.c | 24 ------------------------ arch/arm/mach-mx2/devices.h | 1 - 2 files changed, 25 deletions(-) diff --git a/arch/arm/mach-mx2/devices.c b/arch/arm/mach-mx2/devices.c index a0f1b367432..e6f0f4f1558 100644 --- a/arch/arm/mach-mx2/devices.c +++ b/arch/arm/mach-mx2/devices.c @@ -39,30 +39,6 @@ #include "devices.h" -/* - * Resource definition for the MXC IrDA - */ -static struct resource mxc_irda_resources[] = { - [0] = { - .start = UART3_BASE_ADDR, - .end = UART3_BASE_ADDR + SZ_4K - 1, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = MXC_INT_UART3, - .end = MXC_INT_UART3, - .flags = IORESOURCE_IRQ, - }, -}; - -/* Platform Data for MXC IrDA */ -struct platform_device mxc_irda_device = { - .name = "mxc_irda", - .id = 0, - .num_resources = ARRAY_SIZE(mxc_irda_resources), - .resource = mxc_irda_resources, -}; - /* * General Purpose Timer * - i.MX1: 2 timer (slighly different register handling) diff --git a/arch/arm/mach-mx2/devices.h b/arch/arm/mach-mx2/devices.h index 049005bb6aa..c79ba7fed1b 100644 --- a/arch/arm/mach-mx2/devices.h +++ b/arch/arm/mach-mx2/devices.h @@ -4,7 +4,6 @@ extern struct platform_device mxc_gpt3; extern struct platform_device mxc_gpt4; extern struct platform_device mxc_gpt5; extern struct platform_device mxc_wdt; -extern struct platform_device mxc_irda_device; extern struct platform_device mxc_uart_device0; extern struct platform_device mxc_uart_device1; extern struct platform_device mxc_uart_device2; -- cgit v1.2.3 From bf50bcc242db7f8d2fb6bc099c1693149d9fb5d5 Mon Sep 17 00:00:00 2001 From: Sascha Hauer Date: Tue, 23 Jun 2009 12:04:36 +0200 Subject: mx2: Codingstyle: Let the compiler count arrays Signed-off-by: Sascha Hauer --- arch/arm/mach-mx2/devices.c | 165 ++++++++++++++++++++------------------------ 1 file changed, 73 insertions(+), 92 deletions(-) diff --git a/arch/arm/mach-mx2/devices.c b/arch/arm/mach-mx2/devices.c index e6f0f4f1558..cbf42467466 100644 --- a/arch/arm/mach-mx2/devices.c +++ b/arch/arm/mach-mx2/devices.c @@ -41,20 +41,18 @@ /* * General Purpose Timer - * - i.MX1: 2 timer (slighly different register handling) - * - i.MX21: 3 timer - * - i.MX27: 6 timer + * - i.MX21: 3 timers + * - i.MX27: 6 timers */ /* We use gpt0 as system timer, so do not add a device for this one */ static struct resource timer1_resources[] = { - [0] = { + { .start = GPT2_BASE_ADDR, .end = GPT2_BASE_ADDR + 0x17, - .flags = IORESOURCE_MEM - }, - [1] = { + .flags = IORESOURCE_MEM, + }, { .start = MXC_INT_GPT2, .end = MXC_INT_GPT2, .flags = IORESOURCE_IRQ, @@ -65,16 +63,15 @@ struct platform_device mxc_gpt1 = { .name = "imx_gpt", .id = 1, .num_resources = ARRAY_SIZE(timer1_resources), - .resource = timer1_resources + .resource = timer1_resources, }; static struct resource timer2_resources[] = { - [0] = { + { .start = GPT3_BASE_ADDR, .end = GPT3_BASE_ADDR + 0x17, - .flags = IORESOURCE_MEM - }, - [1] = { + .flags = IORESOURCE_MEM, + }, { .start = MXC_INT_GPT3, .end = MXC_INT_GPT3, .flags = IORESOURCE_IRQ, @@ -85,17 +82,16 @@ struct platform_device mxc_gpt2 = { .name = "imx_gpt", .id = 2, .num_resources = ARRAY_SIZE(timer2_resources), - .resource = timer2_resources + .resource = timer2_resources, }; #ifdef CONFIG_MACH_MX27 static struct resource timer3_resources[] = { - [0] = { + { .start = GPT4_BASE_ADDR, .end = GPT4_BASE_ADDR + 0x17, - .flags = IORESOURCE_MEM - }, - [1] = { + .flags = IORESOURCE_MEM, + }, { .start = MXC_INT_GPT4, .end = MXC_INT_GPT4, .flags = IORESOURCE_IRQ, @@ -106,16 +102,15 @@ struct platform_device mxc_gpt3 = { .name = "imx_gpt", .id = 3, .num_resources = ARRAY_SIZE(timer3_resources), - .resource = timer3_resources + .resource = timer3_resources, }; static struct resource timer4_resources[] = { - [0] = { + { .start = GPT5_BASE_ADDR, .end = GPT5_BASE_ADDR + 0x17, - .flags = IORESOURCE_MEM - }, - [1] = { + .flags = IORESOURCE_MEM, + }, { .start = MXC_INT_GPT5, .end = MXC_INT_GPT5, .flags = IORESOURCE_IRQ, @@ -126,16 +121,15 @@ struct platform_device mxc_gpt4 = { .name = "imx_gpt", .id = 4, .num_resources = ARRAY_SIZE(timer4_resources), - .resource = timer4_resources + .resource = timer4_resources, }; static struct resource timer5_resources[] = { - [0] = { + { .start = GPT6_BASE_ADDR, .end = GPT6_BASE_ADDR + 0x17, - .flags = IORESOURCE_MEM - }, - [1] = { + .flags = IORESOURCE_MEM, + }, { .start = MXC_INT_GPT6, .end = MXC_INT_GPT6, .flags = IORESOURCE_IRQ, @@ -146,7 +140,7 @@ struct platform_device mxc_gpt5 = { .name = "imx_gpt", .id = 5, .num_resources = ARRAY_SIZE(timer5_resources), - .resource = timer5_resources + .resource = timer5_resources, }; #endif @@ -190,11 +184,11 @@ static struct resource mxc_nand_resources[] = { { .start = NFC_BASE_ADDR, .end = NFC_BASE_ADDR + 0xfff, - .flags = IORESOURCE_MEM + .flags = IORESOURCE_MEM, }, { .start = MXC_INT_NANDFC, .end = MXC_INT_NANDFC, - .flags = IORESOURCE_IRQ + .flags = IORESOURCE_IRQ, }, }; @@ -216,8 +210,7 @@ static struct resource mxc_fb[] = { .start = LCDC_BASE_ADDR, .end = LCDC_BASE_ADDR + 0xFFF, .flags = IORESOURCE_MEM, - }, - { + }, { .start = MXC_INT_LCDC, .end = MXC_INT_LCDC, .flags = IORESOURCE_IRQ, @@ -240,11 +233,11 @@ static struct resource mxc_fec_resources[] = { { .start = FEC_BASE_ADDR, .end = FEC_BASE_ADDR + 0xfff, - .flags = IORESOURCE_MEM + .flags = IORESOURCE_MEM, }, { .start = MXC_INT_FEC, .end = MXC_INT_FEC, - .flags = IORESOURCE_IRQ + .flags = IORESOURCE_IRQ, }, }; @@ -257,15 +250,14 @@ struct platform_device mxc_fec_device = { #endif static struct resource mxc_i2c_1_resources[] = { - [0] = { + { .start = I2C_BASE_ADDR, .end = I2C_BASE_ADDR + 0x0fff, - .flags = IORESOURCE_MEM - }, - [1] = { + .flags = IORESOURCE_MEM, + }, { .start = MXC_INT_I2C, .end = MXC_INT_I2C, - .flags = IORESOURCE_IRQ + .flags = IORESOURCE_IRQ, } }; @@ -273,20 +265,19 @@ struct platform_device mxc_i2c_device0 = { .name = "imx-i2c", .id = 0, .num_resources = ARRAY_SIZE(mxc_i2c_1_resources), - .resource = mxc_i2c_1_resources + .resource = mxc_i2c_1_resources, }; #ifdef CONFIG_MACH_MX27 static struct resource mxc_i2c_2_resources[] = { - [0] = { + { .start = I2C2_BASE_ADDR, .end = I2C2_BASE_ADDR + 0x0fff, - .flags = IORESOURCE_MEM - }, - [1] = { + .flags = IORESOURCE_MEM, + }, { .start = MXC_INT_I2C2, .end = MXC_INT_I2C2, - .flags = IORESOURCE_IRQ + .flags = IORESOURCE_IRQ, } }; @@ -294,17 +285,16 @@ struct platform_device mxc_i2c_device1 = { .name = "imx-i2c", .id = 1, .num_resources = ARRAY_SIZE(mxc_i2c_2_resources), - .resource = mxc_i2c_2_resources + .resource = mxc_i2c_2_resources, }; #endif static struct resource mxc_pwm_resources[] = { - [0] = { + { .start = PWM_BASE_ADDR, .end = PWM_BASE_ADDR + 0x0fff, - .flags = IORESOURCE_MEM - }, - [1] = { + .flags = IORESOURCE_MEM, + }, { .start = MXC_INT_PWM, .end = MXC_INT_PWM, .flags = IORESOURCE_IRQ, @@ -315,28 +305,26 @@ struct platform_device mxc_pwm_device = { .name = "mxc_pwm", .id = 0, .num_resources = ARRAY_SIZE(mxc_pwm_resources), - .resource = mxc_pwm_resources + .resource = mxc_pwm_resources, }; /* * Resource definition for the MXC SDHC */ static struct resource mxc_sdhc1_resources[] = { - [0] = { - .start = SDHC1_BASE_ADDR, - .end = SDHC1_BASE_ADDR + SZ_4K - 1, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = MXC_INT_SDHC1, - .end = MXC_INT_SDHC1, - .flags = IORESOURCE_IRQ, - }, - [2] = { - .start = DMA_REQ_SDHC1, - .end = DMA_REQ_SDHC1, - .flags = IORESOURCE_DMA - }, + { + .start = SDHC1_BASE_ADDR, + .end = SDHC1_BASE_ADDR + SZ_4K - 1, + .flags = IORESOURCE_MEM, + }, { + .start = MXC_INT_SDHC1, + .end = MXC_INT_SDHC1, + .flags = IORESOURCE_IRQ, + }, { + .start = DMA_REQ_SDHC1, + .end = DMA_REQ_SDHC1, + .flags = IORESOURCE_DMA, + }, }; static u64 mxc_sdhc1_dmamask = 0xffffffffUL; @@ -353,21 +341,19 @@ struct platform_device mxc_sdhc_device0 = { }; static struct resource mxc_sdhc2_resources[] = { - [0] = { - .start = SDHC2_BASE_ADDR, - .end = SDHC2_BASE_ADDR + SZ_4K - 1, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = MXC_INT_SDHC2, - .end = MXC_INT_SDHC2, - .flags = IORESOURCE_IRQ, - }, - [2] = { - .start = DMA_REQ_SDHC2, - .end = DMA_REQ_SDHC2, - .flags = IORESOURCE_DMA - }, + { + .start = SDHC2_BASE_ADDR, + .end = SDHC2_BASE_ADDR + SZ_4K - 1, + .flags = IORESOURCE_MEM, + }, { + .start = MXC_INT_SDHC2, + .end = MXC_INT_SDHC2, + .flags = IORESOURCE_IRQ, + }, { + .start = DMA_REQ_SDHC2, + .end = DMA_REQ_SDHC2, + .flags = IORESOURCE_DMA, + }, }; static u64 mxc_sdhc2_dmamask = 0xffffffffUL; @@ -385,33 +371,28 @@ struct platform_device mxc_sdhc_device1 = { /* GPIO port description */ static struct mxc_gpio_port imx_gpio_ports[] = { - [0] = { + { .chip.label = "gpio-0", .irq = MXC_INT_GPIO, .base = IO_ADDRESS(GPIO_BASE_ADDR), .virtual_irq_start = MXC_GPIO_IRQ_START, - }, - [1] = { + }, { .chip.label = "gpio-1", .base = IO_ADDRESS(GPIO_BASE_ADDR + 0x100), .virtual_irq_start = MXC_GPIO_IRQ_START + 32, - }, - [2] = { + }, { .chip.label = "gpio-2", .base = IO_ADDRESS(GPIO_BASE_ADDR + 0x200), .virtual_irq_start = MXC_GPIO_IRQ_START + 64, - }, - [3] = { + }, { .chip.label = "gpio-3", .base = IO_ADDRESS(GPIO_BASE_ADDR + 0x300), .virtual_irq_start = MXC_GPIO_IRQ_START + 96, - }, - [4] = { + }, { .chip.label = "gpio-4", .base = IO_ADDRESS(GPIO_BASE_ADDR + 0x400), .virtual_irq_start = MXC_GPIO_IRQ_START + 128, - }, - [5] = { + }, { .chip.label = "gpio-5", .base = IO_ADDRESS(GPIO_BASE_ADDR + 0x500), .virtual_irq_start = MXC_GPIO_IRQ_START + 160, -- cgit v1.2.3 From 3f4f54b4f0052e9838f6bb98535746464d0c01c3 Mon Sep 17 00:00:00 2001 From: Sascha Hauer Date: Tue, 23 Jun 2009 12:12:00 +0200 Subject: mx3: Codingstyle: Let the compiler count arrays Signed-off-by: Sascha Hauer --- arch/arm/mach-mx3/devices.c | 25 ++++++++++--------------- arch/arm/mach-mx3/mx31lite.c | 5 ++--- arch/arm/mach-mx3/pcm037.c | 5 ++--- arch/arm/mach-mx3/qong.c | 5 ++--- 4 files changed, 16 insertions(+), 24 deletions(-) diff --git a/arch/arm/mach-mx3/devices.c b/arch/arm/mach-mx3/devices.c index 9e87e08fb12..7a5c2ef52a4 100644 --- a/arch/arm/mach-mx3/devices.c +++ b/arch/arm/mach-mx3/devices.c @@ -129,19 +129,17 @@ struct platform_device mxc_uart_device4 = { /* GPIO port description */ static struct mxc_gpio_port imx_gpio_ports[] = { - [0] = { + { .chip.label = "gpio-0", .base = IO_ADDRESS(GPIO1_BASE_ADDR), .irq = MXC_INT_GPIO1, .virtual_irq_start = MXC_GPIO_IRQ_START, - }, - [1] = { + }, { .chip.label = "gpio-1", .base = IO_ADDRESS(GPIO2_BASE_ADDR), .irq = MXC_INT_GPIO2, .virtual_irq_start = MXC_GPIO_IRQ_START + 32, - }, - [2] = { + }, { .chip.label = "gpio-2", .base = IO_ADDRESS(GPIO3_BASE_ADDR), .irq = MXC_INT_GPIO3, @@ -173,11 +171,11 @@ static struct resource mxc_nand_resources[] = { { .start = 0, /* runtime dependent */ .end = 0, - .flags = IORESOURCE_MEM + .flags = IORESOURCE_MEM, }, { .start = MXC_INT_NANDFC, .end = MXC_INT_NANDFC, - .flags = IORESOURCE_IRQ + .flags = IORESOURCE_IRQ, }, }; @@ -193,8 +191,7 @@ static struct resource mxc_i2c0_resources[] = { .start = I2C_BASE_ADDR, .end = I2C_BASE_ADDR + SZ_4K - 1, .flags = IORESOURCE_MEM, - }, - { + }, { .start = MXC_INT_I2C, .end = MXC_INT_I2C, .flags = IORESOURCE_IRQ, @@ -213,8 +210,7 @@ static struct resource mxc_i2c1_resources[] = { .start = I2C2_BASE_ADDR, .end = I2C2_BASE_ADDR + SZ_4K - 1, .flags = IORESOURCE_MEM, - }, - { + }, { .start = MXC_INT_I2C2, .end = MXC_INT_I2C2, .flags = IORESOURCE_IRQ, @@ -233,8 +229,7 @@ static struct resource mxc_i2c2_resources[] = { .start = I2C3_BASE_ADDR, .end = I2C3_BASE_ADDR + SZ_4K - 1, .flags = IORESOURCE_MEM, - }, - { + }, { .start = MXC_INT_I2C3, .end = MXC_INT_I2C3, .flags = IORESOURCE_IRQ, @@ -400,11 +395,11 @@ static struct resource mxc_fec_resources[] = { { .start = MXC_FEC_BASE_ADDR, .end = MXC_FEC_BASE_ADDR + 0xfff, - .flags = IORESOURCE_MEM + .flags = IORESOURCE_MEM, }, { .start = MXC_INT_FEC, .end = MXC_INT_FEC, - .flags = IORESOURCE_IRQ + .flags = IORESOURCE_IRQ, }, }; diff --git a/arch/arm/mach-mx3/mx31lite.c b/arch/arm/mach-mx3/mx31lite.c index b1c0afc40cf..a8d57decdfd 100644 --- a/arch/arm/mach-mx3/mx31lite.c +++ b/arch/arm/mach-mx3/mx31lite.c @@ -71,12 +71,11 @@ static struct smsc911x_platform_config smsc911x_config = { }; static struct resource smsc911x_resources[] = { - [0] = { + { .start = CS4_BASE_ADDR, .end = CS4_BASE_ADDR + 0x100, .flags = IORESOURCE_MEM, - }, - [1] = { + }, { .start = IOMUX_TO_IRQ(MX31_PIN_SFS6), .end = IOMUX_TO_IRQ(MX31_PIN_SFS6), .flags = IORESOURCE_IRQ, diff --git a/arch/arm/mach-mx3/pcm037.c b/arch/arm/mach-mx3/pcm037.c index d8472206de9..c755c06b75d 100644 --- a/arch/arm/mach-mx3/pcm037.c +++ b/arch/arm/mach-mx3/pcm037.c @@ -244,12 +244,11 @@ static struct imxuart_platform_data uart_pdata = { }; static struct resource smsc911x_resources[] = { - [0] = { + { .start = CS1_BASE_ADDR + 0x300, .end = CS1_BASE_ADDR + 0x300 + SZ_64K - 1, .flags = IORESOURCE_MEM, - }, - [1] = { + }, { .start = IOMUX_TO_IRQ(MX31_PIN_GPIO3_1), .end = IOMUX_TO_IRQ(MX31_PIN_GPIO3_1), .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_LOWLEVEL, diff --git a/arch/arm/mach-mx3/qong.c b/arch/arm/mach-mx3/qong.c index 0bca4d914ab..044511f1b9a 100644 --- a/arch/arm/mach-mx3/qong.c +++ b/arch/arm/mach-mx3/qong.c @@ -81,13 +81,12 @@ static inline void mxc_init_imx_uart(void) } static struct resource dnet_resources[] = { - [0] = { + { .name = "dnet-memory", .start = QONG_DNET_BASEADDR, .end = QONG_DNET_BASEADDR + QONG_DNET_SIZE - 1, .flags = IORESOURCE_MEM, - }, - [1] = { + }, { .start = QONG_FPGA_IRQ, .end = QONG_FPGA_IRQ, .flags = IORESOURCE_IRQ, -- cgit v1.2.3 From 9b0e6db0da1ea433f38b8d952108746f3fc67304 Mon Sep 17 00:00:00 2001 From: Sascha Hauer Date: Tue, 23 Jun 2009 12:14:39 +0200 Subject: mx1: Codingstyle: Let the compiler count arrays Signed-off-by: Sascha Hauer --- arch/arm/mach-mx1/devices.c | 87 +++++++++++++++++---------------------------- arch/arm/mach-mx1/scb9328.c | 14 ++++---- 2 files changed, 39 insertions(+), 62 deletions(-) diff --git a/arch/arm/mach-mx1/devices.c b/arch/arm/mach-mx1/devices.c index 76d1ffb4807..b6be29d1cb0 100644 --- a/arch/arm/mach-mx1/devices.c +++ b/arch/arm/mach-mx1/devices.c @@ -29,12 +29,11 @@ #include "devices.h" static struct resource imx_csi_resources[] = { - [0] = { + { .start = 0x00224000, .end = 0x00224010, .flags = IORESOURCE_MEM, - }, - [1] = { + }, { .start = CSI_INT, .end = CSI_INT, .flags = IORESOURCE_IRQ, @@ -55,12 +54,11 @@ struct platform_device imx_csi_device = { }; static struct resource imx_i2c_resources[] = { - [0] = { + { .start = 0x00217000, .end = 0x00217010, .flags = IORESOURCE_MEM, - }, - [1] = { + }, { .start = I2C_INT, .end = I2C_INT, .flags = IORESOURCE_IRQ, @@ -75,22 +73,19 @@ struct platform_device imx_i2c_device = { }; static struct resource imx_uart1_resources[] = { - [0] = { + { .start = UART1_BASE_ADDR, .end = UART1_BASE_ADDR + 0xD0, .flags = IORESOURCE_MEM, - }, - [1] = { + }, { .start = UART1_MINT_RX, .end = UART1_MINT_RX, .flags = IORESOURCE_IRQ, - }, - [2] = { + }, { .start = UART1_MINT_TX, .end = UART1_MINT_TX, .flags = IORESOURCE_IRQ, - }, - [3] = { + }, { .start = UART1_MINT_RTS, .end = UART1_MINT_RTS, .flags = IORESOURCE_IRQ, @@ -105,22 +100,19 @@ struct platform_device imx_uart1_device = { }; static struct resource imx_uart2_resources[] = { - [0] = { + { .start = UART2_BASE_ADDR, .end = UART2_BASE_ADDR + 0xD0, .flags = IORESOURCE_MEM, - }, - [1] = { + }, { .start = UART2_MINT_RX, .end = UART2_MINT_RX, .flags = IORESOURCE_IRQ, - }, - [2] = { + }, { .start = UART2_MINT_TX, .end = UART2_MINT_TX, .flags = IORESOURCE_IRQ, - }, - [3] = { + }, { .start = UART2_MINT_RTS, .end = UART2_MINT_RTS, .flags = IORESOURCE_IRQ, @@ -135,17 +127,15 @@ struct platform_device imx_uart2_device = { }; static struct resource imx_rtc_resources[] = { - [0] = { + { .start = 0x00204000, .end = 0x00204024, .flags = IORESOURCE_MEM, - }, - [1] = { + }, { .start = RTC_INT, .end = RTC_INT, .flags = IORESOURCE_IRQ, - }, - [2] = { + }, { .start = RTC_SAMINT, .end = RTC_SAMINT, .flags = IORESOURCE_IRQ, @@ -160,12 +150,11 @@ struct platform_device imx_rtc_device = { }; static struct resource imx_wdt_resources[] = { - [0] = { + { .start = 0x00201000, .end = 0x00201008, .flags = IORESOURCE_MEM, - }, - [1] = { + }, { .start = WDT_INT, .end = WDT_INT, .flags = IORESOURCE_IRQ, @@ -180,42 +169,35 @@ struct platform_device imx_wdt_device = { }; static struct resource imx_usb_resources[] = { - [0] = { + { .start = 0x00212000, .end = 0x00212148, .flags = IORESOURCE_MEM, - }, - [1] = { + }, { .start = USBD_INT0, .end = USBD_INT0, .flags = IORESOURCE_IRQ, - }, - [2] = { + }, { .start = USBD_INT1, .end = USBD_INT1, .flags = IORESOURCE_IRQ, - }, - [3] = { + }, { .start = USBD_INT2, .end = USBD_INT2, .flags = IORESOURCE_IRQ, - }, - [4] = { + }, { .start = USBD_INT3, .end = USBD_INT3, .flags = IORESOURCE_IRQ, - }, - [5] = { + }, { .start = USBD_INT4, .end = USBD_INT4, .flags = IORESOURCE_IRQ, - }, - [6] = { + }, { .start = USBD_INT5, .end = USBD_INT5, .flags = IORESOURCE_IRQ, - }, - [7] = { + }, { .start = USBD_INT6, .end = USBD_INT6, .flags = IORESOURCE_IRQ, @@ -231,29 +213,26 @@ struct platform_device imx_usb_device = { /* GPIO port description */ static struct mxc_gpio_port imx_gpio_ports[] = { - [0] = { + { .chip.label = "gpio-0", .base = (void __iomem *)IO_ADDRESS(GPIO_BASE_ADDR), .irq = GPIO_INT_PORTA, - .virtual_irq_start = MXC_GPIO_IRQ_START - }, - [1] = { + .virtual_irq_start = MXC_GPIO_IRQ_START, + }, { .chip.label = "gpio-1", .base = (void __iomem *)IO_ADDRESS(GPIO_BASE_ADDR + 0x100), .irq = GPIO_INT_PORTB, - .virtual_irq_start = MXC_GPIO_IRQ_START + 32 - }, - [2] = { + .virtual_irq_start = MXC_GPIO_IRQ_START + 32, + }, { .chip.label = "gpio-2", .base = (void __iomem *)IO_ADDRESS(GPIO_BASE_ADDR + 0x200), .irq = GPIO_INT_PORTC, - .virtual_irq_start = MXC_GPIO_IRQ_START + 64 - }, - [3] = { + .virtual_irq_start = MXC_GPIO_IRQ_START + 64, + }, { .chip.label = "gpio-3", .base = (void __iomem *)IO_ADDRESS(GPIO_BASE_ADDR + 0x300), .irq = GPIO_INT_PORTD, - .virtual_irq_start = MXC_GPIO_IRQ_START + 96 + .virtual_irq_start = MXC_GPIO_IRQ_START + 96, } }; diff --git a/arch/arm/mach-mx1/scb9328.c b/arch/arm/mach-mx1/scb9328.c index 125d495e9c7..325d98df605 100644 --- a/arch/arm/mach-mx1/scb9328.c +++ b/arch/arm/mach-mx1/scb9328.c @@ -68,22 +68,20 @@ static struct dm9000_plat_data dm9000_platdata = { * to gain access to address latch registers and the data path. */ static struct resource dm9000x_resources[] = { - [0] = { + { .name = "address area", .start = IMX_CS5_PHYS, .end = IMX_CS5_PHYS + 1, - .flags = IORESOURCE_MEM /* address access */ - }, - [1] = { + .flags = IORESOURCE_MEM, /* address access */ + }, { .name = "data area", .start = IMX_CS5_PHYS + 4, .end = IMX_CS5_PHYS + 5, - .flags = IORESOURCE_MEM /* data access */ - }, - [2] = { + .flags = IORESOURCE_MEM, /* data access */ + }, { .start = IRQ_GPIOC(3), .end = IRQ_GPIOC(3), - .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_LOWLEVEL + .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_LOWLEVEL, }, }; -- cgit v1.2.3 From f497d0153a6b53b4cfd004de5f10b14bf630d852 Mon Sep 17 00:00:00 2001 From: Sascha Hauer Date: Wed, 18 Mar 2009 11:29:31 +0100 Subject: imxfb: calculate bpix value from bits_per_pixel Signed-off-by: Sascha Hauer --- arch/arm/plat-mxc/include/mach/imxfb.h | 3 ++- drivers/video/imxfb.c | 19 ++++++++++++++++++- 2 files changed, 20 insertions(+), 2 deletions(-) diff --git a/arch/arm/plat-mxc/include/mach/imxfb.h b/arch/arm/plat-mxc/include/mach/imxfb.h index 9f0101157ec..66259f6158e 100644 --- a/arch/arm/plat-mxc/include/mach/imxfb.h +++ b/arch/arm/plat-mxc/include/mach/imxfb.h @@ -13,7 +13,8 @@ #define PCR_BPIX_4 (2 << 25) #define PCR_BPIX_8 (3 << 25) #define PCR_BPIX_12 (4 << 25) -#define PCR_BPIX_16 (4 << 25) +#define PCR_BPIX_16 (5 << 25) +#define PCR_BPIX_18 (6 << 25) #define PCR_PIXPOL (1 << 24) #define PCR_FLMPOL (1 << 23) #define PCR_LPPOL (1 << 22) diff --git a/drivers/video/imxfb.c b/drivers/video/imxfb.c index 15a0ee6d8e2..a8c41cb60ff 100644 --- a/drivers/video/imxfb.c +++ b/drivers/video/imxfb.c @@ -33,6 +33,7 @@ #include #include +#include /* * Complain if VAR is out of range. @@ -530,8 +531,24 @@ static int imxfb_activate_var(struct fb_var_screeninfo *var, struct fb_info *inf lcd_clk / pcr); } + switch (var->bits_per_pixel) { + case 32: + pcr |= PCR_BPIX_18; + break; + case 16: + default: + if (cpu_is_mx1()) + pcr |= PCR_BPIX_12; + else + pcr |= PCR_BPIX_16; + break; + case 8: + pcr |= PCR_BPIX_8; + break; + } + /* add sync polarities */ - pcr |= fbi->pcr & ~0x3F; + pcr |= fbi->pcr & ~(0x3f | (7 << 25)); writel(pcr, fbi->regs + LCDC_PCR); writel(fbi->pwmr, fbi->regs + LCDC_PWMR); -- cgit v1.2.3 From d6b515028863a912d051d371b6d71e09f2a9ff19 Mon Sep 17 00:00:00 2001 From: Sascha Hauer Date: Mon, 29 Jun 2009 11:41:09 +0200 Subject: imxfb: use resource_size() macro This fixes an off-by-one error. Also, use dev_err instead of printk in probe() function. Signed-off-by: Sascha Hauer --- drivers/video/imxfb.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/drivers/video/imxfb.c b/drivers/video/imxfb.c index a8c41cb60ff..330857a8b31 100644 --- a/drivers/video/imxfb.c +++ b/drivers/video/imxfb.c @@ -661,7 +661,7 @@ static int __init imxfb_probe(struct platform_device *pdev) struct resource *res; int ret; - printk("i.MX Framebuffer driver\n"); + dev_info(&pdev->dev, "i.MX Framebuffer driver\n"); res = platform_get_resource(pdev, IORESOURCE_MEM, 0); if (!res) @@ -701,7 +701,7 @@ static int __init imxfb_probe(struct platform_device *pdev) fbi->regs = ioremap(res->start, resource_size(res)); if (fbi->regs == NULL) { - printk(KERN_ERR"Cannot map frame buffer registers\n"); + dev_err(&pdev->dev, "Cannot map frame buffer registers\n"); goto failed_ioremap; } @@ -771,7 +771,7 @@ failed_map: failed_getclock: iounmap(fbi->regs); failed_ioremap: - release_mem_region(res->start, res->end - res->start); + release_mem_region(res->start, resource_size(res)); failed_req: kfree(info->pseudo_palette); failed_init: @@ -802,7 +802,7 @@ static int __devexit imxfb_remove(struct platform_device *pdev) framebuffer_release(info); iounmap(fbi->regs); - release_mem_region(res->start, res->end - res->start + 1); + release_mem_region(res->start, resource_size(res)); clk_disable(fbi->clk); clk_put(fbi->clk); -- cgit v1.2.3 From 343684ffb793a3c371579b7bbc16724713ee5ac7 Mon Sep 17 00:00:00 2001 From: Sascha Hauer Date: Thu, 19 Mar 2009 08:25:41 +0100 Subject: imxfb: Add support for multiple displays Signed-off-by: Sascha Hauer --- arch/arm/mach-mx2/mx27ads.c | 36 ++++--- arch/arm/mach-mx2/pcm970-baseboard.c | 83 +++++++++----- arch/arm/plat-mxc/include/mach/imxfb.h | 26 ++--- drivers/video/imxfb.c | 191 +++++++++++++++++++++------------ 4 files changed, 208 insertions(+), 128 deletions(-) diff --git a/arch/arm/mach-mx2/mx27ads.c b/arch/arm/mach-mx2/mx27ads.c index a9f69eb58b7..83e412b713e 100644 --- a/arch/arm/mach-mx2/mx27ads.c +++ b/arch/arm/mach-mx2/mx27ads.c @@ -183,20 +183,29 @@ void lcd_power(int on) __raw_writew(PBC_BCTRL1_LCDON, PBC_BCTRL1_CLEAR_REG); } -static struct imx_fb_platform_data mx27ads_fb_data = { - .pixclock = 188679, - .xres = 240, - .yres = 320, - - .bpp = 16, - .hsync_len = 1, - .left_margin = 9, - .right_margin = 16, +static struct imx_fb_videomode mx27ads_modes[] = { + { + .mode = { + .name = "Sharp-LQ035Q7", + .refresh = 60, + .xres = 240, + .yres = 320, + .pixclock = 188679, /* in ps (5.3MHz) */ + .hsync_len = 1, + .left_margin = 9, + .right_margin = 16, + .vsync_len = 1, + .upper_margin = 7, + .lower_margin = 9, + }, + .bpp = 16, + .pcr = 0xFB008BC0, + }, +}; - .vsync_len = 1, - .upper_margin = 7, - .lower_margin = 9, - .fixed_screen_cpu = 0, +static struct imx_fb_platform_data mx27ads_fb_data = { + .mode = mx27ads_modes, + .num_modes = ARRAY_SIZE(mx27ads_modes), /* * - HSYNC active high @@ -207,7 +216,6 @@ static struct imx_fb_platform_data mx27ads_fb_data = { * - data enable low active * - enable sharp mode */ - .pcr = 0xFB008BC0, .pwmr = 0x00A903FF, .lscr1 = 0x00120300, .dmacr = 0x00020010, diff --git a/arch/arm/mach-mx2/pcm970-baseboard.c b/arch/arm/mach-mx2/pcm970-baseboard.c index 6a3acaf57dd..8e2bc94f1a0 100644 --- a/arch/arm/mach-mx2/pcm970-baseboard.c +++ b/arch/arm/mach-mx2/pcm970-baseboard.c @@ -125,35 +125,64 @@ static struct imxmmc_platform_data sdhc_pdata = { .exit = pcm970_sdhc2_exit, }; -/* - * Connected is a portrait Sharp-QVGA display - * of type: LQ035Q7DH06 - */ -static struct imx_fb_platform_data pcm038_fb_data = { - .pixclock = 188679, /* in ps (5.3MHz) */ - .xres = 240, - .yres = 320, - - .bpp = 16, - .hsync_len = 7, - .left_margin = 5, - .right_margin = 16, +static struct imx_fb_videomode pcm970_modes[] = { + { + .mode = { + .name = "Sharp-LQ035Q7", + .refresh = 60, + .xres = 240, + .yres = 320, + .pixclock = 188679, /* in ps (5.3MHz) */ + .hsync_len = 7, + .left_margin = 5, + .right_margin = 16, + .vsync_len = 1, + .upper_margin = 7, + .lower_margin = 9, + }, + /* + * - HSYNC active high + * - VSYNC active high + * - clk notenabled while idle + * - clock not inverted + * - data not inverted + * - data enable low active + * - enable sharp mode + */ + .pcr = 0xF00080C0, + .bpp = 16, + }, { + .mode = { + .name = "TX090", + .refresh = 60, + .xres = 240, + .yres = 320, + .pixclock = 38255, + .left_margin = 144, + .right_margin = 0, + .upper_margin = 7, + .lower_margin = 40, + .hsync_len = 96, + .vsync_len = 1, + }, + /* + * - HSYNC active low (1 << 22) + * - VSYNC active low (1 << 23) + * - clk notenabled while idle + * - clock not inverted + * - data not inverted + * - data enable low active + * - enable sharp mode + */ + .pcr = 0xF0008080 | (1<<22) | (1<<23) | (1<<19), + .bpp = 32, + }, +}; - .vsync_len = 1, - .upper_margin = 7, - .lower_margin = 9, - .fixed_screen_cpu = 0, +static struct imx_fb_platform_data pcm038_fb_data = { + .mode = pcm970_modes, + .num_modes = ARRAY_SIZE(pcm970_modes), - /* - * - HSYNC active high - * - VSYNC active high - * - clk notenabled while idle - * - clock not inverted - * - data not inverted - * - data enable low active - * - enable sharp mode - */ - .pcr = 0xFA0080C0, .pwmr = 0x00A903FF, .lscr1 = 0x00120300, .dmacr = 0x00020010, diff --git a/arch/arm/plat-mxc/include/mach/imxfb.h b/arch/arm/plat-mxc/include/mach/imxfb.h index 66259f6158e..5263506b7dd 100644 --- a/arch/arm/plat-mxc/include/mach/imxfb.h +++ b/arch/arm/plat-mxc/include/mach/imxfb.h @@ -2,6 +2,8 @@ * This structure describes the machine which we are running on. */ +#include + #define PCR_TFT (1 << 31) #define PCR_COLOR (1 << 30) #define PCR_PBSIZ_1 (0 << 28) @@ -47,29 +49,21 @@ #define DMACR_HM(x) (((x) & 0xf) << 16) #define DMACR_TM(x) ((x) & 0xf) -struct imx_fb_platform_data { - u_long pixclock; - - u_short xres; - u_short yres; - - u_int nonstd; - u_char bpp; - u_char hsync_len; - u_char left_margin; - u_char right_margin; +struct imx_fb_videomode { + struct fb_videomode mode; + u32 pcr; + unsigned char bpp; +}; - u_char vsync_len; - u_char upper_margin; - u_char lower_margin; - u_char sync; +struct imx_fb_platform_data { + struct imx_fb_videomode *mode; + int num_modes; u_int cmap_greyscale:1, cmap_inverse:1, cmap_static:1, unused:29; - u_int pcr; u_int pwmr; u_int lscr1; u_int dmacr; diff --git a/drivers/video/imxfb.c b/drivers/video/imxfb.c index 330857a8b31..30ae3022f63 100644 --- a/drivers/video/imxfb.c +++ b/drivers/video/imxfb.c @@ -130,6 +130,10 @@ #define LCDISR_EOF (1<<1) #define LCDISR_BOF (1<<0) +/* Used fb-mode. Can be set on kernel command line, therefore file-static. */ +static const char *fb_mode; + + /* * These are the bitfields for each * display depth that we support. @@ -146,10 +150,6 @@ struct imxfb_info { void __iomem *regs; struct clk *clk; - u_int max_bpp; - u_int max_xres; - u_int max_yres; - /* * These are the addresses we mapped * the framebuffer memory region to. @@ -173,6 +173,9 @@ struct imxfb_info { cmap_static:1, unused:30; + struct imx_fb_videomode *mode; + int num_modes; + void (*lcd_power)(int); void (*backlight_power)(int); }; @@ -299,6 +302,18 @@ static int imxfb_setcolreg(u_int regno, u_int red, u_int green, u_int blue, return ret; } +static const struct imx_fb_videomode *imxfb_find_mode(struct imxfb_info *fbi) +{ + struct imx_fb_videomode *m; + int i; + + for (i = 0, m = &fbi->mode[0]; i < fbi->num_modes; i++, m++) { + if (!strcmp(m->mode.name, fb_mode)) + return m; + } + return NULL; +} + /* * imxfb_check_var(): * Round up in the following order: bits_per_pixel, xres, @@ -309,35 +324,81 @@ static int imxfb_check_var(struct fb_var_screeninfo *var, struct fb_info *info) { struct imxfb_info *fbi = info->par; struct imxfb_rgb *rgb; + const struct imx_fb_videomode *imxfb_mode; + unsigned long lcd_clk; + unsigned long long tmp; + u32 pcr = 0; if (var->xres < MIN_XRES) var->xres = MIN_XRES; if (var->yres < MIN_YRES) var->yres = MIN_YRES; - if (var->xres > fbi->max_xres) - var->xres = fbi->max_xres; - if (var->yres > fbi->max_yres) - var->yres = fbi->max_yres; - var->xres_virtual = max(var->xres_virtual, var->xres); - var->yres_virtual = max(var->yres_virtual, var->yres); + + imxfb_mode = imxfb_find_mode(fbi); + if (!imxfb_mode) + return -EINVAL; + + var->xres = imxfb_mode->mode.xres; + var->yres = imxfb_mode->mode.yres; + var->bits_per_pixel = imxfb_mode->bpp; + var->pixclock = imxfb_mode->mode.pixclock; + var->hsync_len = imxfb_mode->mode.hsync_len; + var->left_margin = imxfb_mode->mode.left_margin; + var->right_margin = imxfb_mode->mode.right_margin; + var->vsync_len = imxfb_mode->mode.vsync_len; + var->upper_margin = imxfb_mode->mode.upper_margin; + var->lower_margin = imxfb_mode->mode.lower_margin; + var->sync = imxfb_mode->mode.sync; + var->xres_virtual = max(var->xres_virtual, var->xres); + var->yres_virtual = max(var->yres_virtual, var->yres); pr_debug("var->bits_per_pixel=%d\n", var->bits_per_pixel); + + lcd_clk = clk_get_rate(fbi->clk); + + tmp = var->pixclock * (unsigned long long)lcd_clk; + + do_div(tmp, 1000000); + + if (do_div(tmp, 1000000) > 500000) + tmp++; + + pcr = (unsigned int)tmp; + + if (--pcr > 0x3F) { + pcr = 0x3F; + printk(KERN_WARNING "Must limit pixel clock to %luHz\n", + lcd_clk / pcr); + } + switch (var->bits_per_pixel) { case 32: + pcr |= PCR_BPIX_18; rgb = &def_rgb_18; break; case 16: default: - if (fbi->pcr & PCR_TFT) + if (cpu_is_mx1()) + pcr |= PCR_BPIX_12; + else + pcr |= PCR_BPIX_16; + + if (imxfb_mode->pcr & PCR_TFT) rgb = &def_rgb_16_tft; else rgb = &def_rgb_16_stn; break; case 8: + pcr |= PCR_BPIX_8; rgb = &def_rgb_8; break; } + /* add sync polarities */ + pcr |= imxfb_mode->pcr & ~(0x3f | (7 << 25)); + + fbi->pcr = pcr; + /* * Copy the RGB parameters for this display * from the machine specific parameters. @@ -394,10 +455,6 @@ static void imxfb_enable_controller(struct imxfb_info *fbi) writel(fbi->screen_dma, fbi->regs + LCDC_SSA); - /* physical screen start address */ - writel(VPW_VPW(fbi->max_xres * fbi->max_bpp / 8 / 4), - fbi->regs + LCDC_VPW); - /* panning offset 0 (0 pixel offset) */ writel(0x00000000, fbi->regs + LCDC_POS); @@ -469,8 +526,6 @@ static struct fb_ops imxfb_ops = { static int imxfb_activate_var(struct fb_var_screeninfo *var, struct fb_info *info) { struct imxfb_info *fbi = info->par; - unsigned int pcr, lcd_clk; - unsigned long long tmp; pr_debug("var: xres=%d hslen=%d lm=%d rm=%d\n", var->xres, var->hsync_len, @@ -506,6 +561,10 @@ static int imxfb_activate_var(struct fb_var_screeninfo *var, struct fb_info *inf info->fix.id, var->lower_margin); #endif + /* physical screen start address */ + writel(VPW_VPW(var->xres * var->bits_per_pixel / 8 / 4), + fbi->regs + LCDC_VPW); + writel(HCR_H_WIDTH(var->hsync_len - 1) | HCR_H_WAIT_1(var->right_margin - 1) | HCR_H_WAIT_2(var->left_margin - 3), @@ -519,38 +578,7 @@ static int imxfb_activate_var(struct fb_var_screeninfo *var, struct fb_info *inf writel(SIZE_XMAX(var->xres) | SIZE_YMAX(var->yres), fbi->regs + LCDC_SIZE); - lcd_clk = clk_get_rate(fbi->clk); - tmp = var->pixclock * (unsigned long long)lcd_clk; - do_div(tmp, 1000000); - if (do_div(tmp, 1000000) > 500000) - tmp++; - pcr = (unsigned int)tmp; - if (--pcr > 0x3F) { - pcr = 0x3F; - printk(KERN_WARNING "Must limit pixel clock to %uHz\n", - lcd_clk / pcr); - } - - switch (var->bits_per_pixel) { - case 32: - pcr |= PCR_BPIX_18; - break; - case 16: - default: - if (cpu_is_mx1()) - pcr |= PCR_BPIX_12; - else - pcr |= PCR_BPIX_16; - break; - case 8: - pcr |= PCR_BPIX_8; - break; - } - - /* add sync polarities */ - pcr |= fbi->pcr & ~(0x3f | (7 << 25)); - - writel(pcr, fbi->regs + LCDC_PCR); + writel(fbi->pcr, fbi->regs + LCDC_PCR); writel(fbi->pwmr, fbi->regs + LCDC_PWMR); writel(fbi->lscr1, fbi->regs + LCDC_LSCR1); writel(fbi->dmacr, fbi->regs + LCDC_DMACR); @@ -592,6 +620,8 @@ static int __init imxfb_init_fbinfo(struct platform_device *pdev) struct imx_fb_platform_data *pdata = pdev->dev.platform_data; struct fb_info *info = dev_get_drvdata(&pdev->dev); struct imxfb_info *fbi = info->par; + struct imx_fb_videomode *m; + int i; pr_debug("%s\n",__func__); @@ -620,35 +650,18 @@ static int __init imxfb_init_fbinfo(struct platform_device *pdev) info->fbops = &imxfb_ops; info->flags = FBINFO_FLAG_DEFAULT | FBINFO_READS_FAST; - - fbi->max_xres = pdata->xres; - info->var.xres = pdata->xres; - info->var.xres_virtual = pdata->xres; - fbi->max_yres = pdata->yres; - info->var.yres = pdata->yres; - info->var.yres_virtual = pdata->yres; - fbi->max_bpp = pdata->bpp; - info->var.bits_per_pixel = pdata->bpp; - info->var.nonstd = pdata->nonstd; - info->var.pixclock = pdata->pixclock; - info->var.hsync_len = pdata->hsync_len; - info->var.left_margin = pdata->left_margin; - info->var.right_margin = pdata->right_margin; - info->var.vsync_len = pdata->vsync_len; - info->var.upper_margin = pdata->upper_margin; - info->var.lower_margin = pdata->lower_margin; - info->var.sync = pdata->sync; info->var.grayscale = pdata->cmap_greyscale; fbi->cmap_inverse = pdata->cmap_inverse; fbi->cmap_static = pdata->cmap_static; - fbi->pcr = pdata->pcr; fbi->lscr1 = pdata->lscr1; fbi->dmacr = pdata->dmacr; fbi->pwmr = pdata->pwmr; fbi->lcd_power = pdata->lcd_power; fbi->backlight_power = pdata->backlight_power; - info->fix.smem_len = fbi->max_xres * fbi->max_yres * - fbi->max_bpp / 8; + + for (i = 0, m = &pdata->mode[0]; i < pdata->num_modes; i++, m++) + info->fix.smem_len = max_t(size_t, info->fix.smem_len, + m->mode.xres * m->mode.yres * m->bpp / 8); return 0; } @@ -659,7 +672,7 @@ static int __init imxfb_probe(struct platform_device *pdev) struct fb_info *info; struct imx_fb_platform_data *pdata; struct resource *res; - int ret; + int ret, i; dev_info(&pdev->dev, "i.MX Framebuffer driver\n"); @@ -679,6 +692,9 @@ static int __init imxfb_probe(struct platform_device *pdev) fbi = info->par; + if (!fb_mode) + fb_mode = pdata->mode[0].mode.name; + platform_set_drvdata(pdev, info); ret = imxfb_init_fbinfo(pdev); @@ -736,6 +752,13 @@ static int __init imxfb_probe(struct platform_device *pdev) goto failed_platform_init; } + fbi->mode = pdata->mode; + fbi->num_modes = pdata->num_modes; + + INIT_LIST_HEAD(&info->modelist); + for (i = 0; i < pdata->num_modes; i++) + fb_add_videomode(&pdata->mode[i].mode, &info->modelist); + /* * This makes sure that our colour bitfield * descriptors are correctly initialised. @@ -828,8 +851,34 @@ static struct platform_driver imxfb_driver = { }, }; +static int imxfb_setup(void) +{ +#ifndef MODULE + char *opt, *options = NULL; + + if (fb_get_options("imxfb", &options)) + return -ENODEV; + + if (!options || !*options) + return 0; + + while ((opt = strsep(&options, ",")) != NULL) { + if (!*opt) + continue; + else + fb_mode = opt; + } +#endif + return 0; +} + int __init imxfb_init(void) { + int ret = imxfb_setup(); + + if (ret < 0) + return ret; + return platform_driver_probe(&imxfb_driver, imxfb_probe); } -- cgit v1.2.3 From 91bf9a2566a6f507f45ad2fb59802e528f5a9c3f Mon Sep 17 00:00:00 2001 From: Sascha Hauer Date: Tue, 23 Jun 2009 13:21:28 +0200 Subject: pcm037: Add support for SJA1000 on baseboard Signed-off-by: Sascha Hauer --- arch/arm/mach-mx3/pcm037.c | 30 ++++++++++++++++++++++++++++++ 1 file changed, 30 insertions(+) diff --git a/arch/arm/mach-mx3/pcm037.c b/arch/arm/mach-mx3/pcm037.c index c755c06b75d..1b9140e2303 100644 --- a/arch/arm/mach-mx3/pcm037.c +++ b/arch/arm/mach-mx3/pcm037.c @@ -32,6 +32,7 @@ #include #include #include +#include #include @@ -514,6 +515,33 @@ static struct mx3fb_platform_data mx3fb_pdata = { .num_modes = ARRAY_SIZE(fb_modedb), }; +static struct resource pcm970_sja1000_resources[] = { + { + .start = CS5_BASE_ADDR, + .end = CS5_BASE_ADDR + 0x100 - 1, + .flags = IORESOURCE_MEM, + }, { + .start = IOMUX_TO_IRQ(IOMUX_PIN(48, 105)), + .end = IOMUX_TO_IRQ(IOMUX_PIN(48, 105)), + .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_LOWEDGE, + }, +}; + +struct sja1000_platform_data pcm970_sja1000_platform_data = { + .clock = 16000000 / 2, + .ocr = 0x40 | 0x18, + .cdr = 0x40, +}; + +static struct platform_device pcm970_sja1000 = { + .name = "sja1000_platform", + .dev = { + .platform_data = &pcm970_sja1000_platform_data, + }, + .resource = pcm970_sja1000_resources, + .num_resources = ARRAY_SIZE(pcm970_sja1000_resources), +}; + /* * Board specific initialization. */ @@ -574,6 +602,8 @@ static void __init mxc_board_init(void) if (!pcm037_camera_alloc_dma(4 * 1024 * 1024)) mxc_register_device(&mx3_camera, &camera_pdata); + + platform_device_register(&pcm970_sja1000); } static void __init pcm037_timer_init(void) -- cgit v1.2.3 From 61b032ef263c17bb733cfb3f87a811be52adbe22 Mon Sep 17 00:00:00 2001 From: Sascha Hauer Date: Tue, 23 Jun 2009 13:21:42 +0200 Subject: pcm038: Add support for SJA1000 on baseboard Signed-off-by: Sascha Hauer --- arch/arm/mach-mx2/pcm970-baseboard.c | 29 +++++++++++++++++++++++++++++ 1 file changed, 29 insertions(+) diff --git a/arch/arm/mach-mx2/pcm970-baseboard.c b/arch/arm/mach-mx2/pcm970-baseboard.c index 8e2bc94f1a0..c261f59b0b4 100644 --- a/arch/arm/mach-mx2/pcm970-baseboard.c +++ b/arch/arm/mach-mx2/pcm970-baseboard.c @@ -19,6 +19,7 @@ #include #include #include +#include #include @@ -188,6 +189,33 @@ static struct imx_fb_platform_data pcm038_fb_data = { .dmacr = 0x00020010, }; +static struct resource pcm970_sja1000_resources[] = { + { + .start = CS4_BASE_ADDR, + .end = CS4_BASE_ADDR + 0x100 - 1, + .flags = IORESOURCE_MEM, + }, { + .start = IRQ_GPIOE(19), + .end = IRQ_GPIOE(19), + .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_LOWEDGE, + }, +}; + +struct sja1000_platform_data pcm970_sja1000_platform_data = { + .clock = 16000000 / 2, + .ocr = 0x40 | 0x18, + .cdr = 0x40, +}; + +static struct platform_device pcm970_sja1000 = { + .name = "sja1000_platform", + .dev = { + .platform_data = &pcm970_sja1000_platform_data, + }, + .resource = pcm970_sja1000_resources, + .num_resources = ARRAY_SIZE(pcm970_sja1000_resources), +}; + /* * system init for baseboard usage. Will be called by pcm038 init. * @@ -201,4 +229,5 @@ void __init pcm970_baseboard_init(void) mxc_register_device(&mxc_fb_device, &pcm038_fb_data); mxc_register_device(&mxc_sdhc_device1, &sdhc_pdata); + platform_device_register(&pcm970_sja1000); } -- cgit v1.2.3 From 8afaada2dc9247ffcd2982be824cd290ace18f55 Mon Sep 17 00:00:00 2001 From: Sascha Hauer Date: Mon, 15 Jun 2009 12:36:25 +0200 Subject: mxc gpio: CONFIG_ARCH_* -> cpu_is_*() Signed-off-by: Sascha Hauer --- arch/arm/plat-mxc/gpio.c | 25 +++++++++++-------------- 1 file changed, 11 insertions(+), 14 deletions(-) diff --git a/arch/arm/plat-mxc/gpio.c b/arch/arm/plat-mxc/gpio.c index 7506d963be4..b7071572035 100644 --- a/arch/arm/plat-mxc/gpio.c +++ b/arch/arm/plat-mxc/gpio.c @@ -162,7 +162,6 @@ static void mxc_gpio_irq_handler(struct mxc_gpio_port *port, u32 irq_stat) } } -#if defined(CONFIG_ARCH_MX3) || defined(CONFIG_ARCH_MX1) /* MX1 and MX3 has one interrupt *per* gpio port */ static void mx3_gpio_irq_handler(u32 irq, struct irq_desc *desc) { @@ -174,9 +173,7 @@ static void mx3_gpio_irq_handler(u32 irq, struct irq_desc *desc) mxc_gpio_irq_handler(port, irq_stat); } -#endif -#ifdef CONFIG_ARCH_MX2 /* MX2 has one interrupt *for all* gpio ports */ static void mx2_gpio_irq_handler(u32 irq, struct irq_desc *desc) { @@ -195,7 +192,6 @@ static void mx2_gpio_irq_handler(u32 irq, struct irq_desc *desc) mxc_gpio_irq_handler(&port[i], irq_stat); } } -#endif static struct irq_chip gpio_irq_chip = { .ack = gpio_ack_irq, @@ -284,17 +280,18 @@ int __init mxc_gpio_init(struct mxc_gpio_port *port, int cnt) /* its a serious configuration bug when it fails */ BUG_ON( gpiochip_add(&port[i].chip) < 0 ); -#if defined(CONFIG_ARCH_MX3) || defined(CONFIG_ARCH_MX1) - /* setup one handler for each entry */ - set_irq_chained_handler(port[i].irq, mx3_gpio_irq_handler); - set_irq_data(port[i].irq, &port[i]); -#endif + if (cpu_is_mx1() || cpu_is_mx3()) { + /* setup one handler for each entry */ + set_irq_chained_handler(port[i].irq, mx3_gpio_irq_handler); + set_irq_data(port[i].irq, &port[i]); + } + } + + if (cpu_is_mx2()) { + /* setup one handler for all GPIO interrupts */ + set_irq_chained_handler(port[0].irq, mx2_gpio_irq_handler); + set_irq_data(port[0].irq, port); } -#ifdef CONFIG_ARCH_MX2 - /* setup one handler for all GPIO interrupts */ - set_irq_chained_handler(port[0].irq, mx2_gpio_irq_handler); - set_irq_data(port[0].irq, port); -#endif return 0; } -- cgit v1.2.3 From 494f22dddc6308b9c35984118ff4cb1681ad8e48 Mon Sep 17 00:00:00 2001 From: Sascha Hauer Date: Wed, 27 May 2009 18:26:51 +0200 Subject: MXC gpio interrupt support: move register definitions to .c file Signed-off-by: Sascha Hauer --- arch/arm/plat-mxc/gpio.c | 17 +++++++++++++++++ arch/arm/plat-mxc/include/mach/mx1.h | 14 -------------- arch/arm/plat-mxc/include/mach/mx2x.h | 14 -------------- arch/arm/plat-mxc/include/mach/mx3x.h | 14 -------------- 4 files changed, 17 insertions(+), 42 deletions(-) diff --git a/arch/arm/plat-mxc/gpio.c b/arch/arm/plat-mxc/gpio.c index b7071572035..f0315edb3eb 100644 --- a/arch/arm/plat-mxc/gpio.c +++ b/arch/arm/plat-mxc/gpio.c @@ -29,6 +29,23 @@ static struct mxc_gpio_port *mxc_gpio_ports; static int gpio_table_size; +#define cpu_is_mx1_mx2() (cpu_is_mx1() || cpu_is_mx2()) + +#define GPIO_DR (cpu_is_mx1_mx2() ? 0x1c : 0x00) +#define GPIO_GDIR (cpu_is_mx1_mx2() ? 0x00 : 0x04) +#define GPIO_PSR (cpu_is_mx1_mx2() ? 0x24 : 0x08) +#define GPIO_ICR1 (cpu_is_mx1_mx2() ? 0x28 : 0x0C) +#define GPIO_ICR2 (cpu_is_mx1_mx2() ? 0x2C : 0x10) +#define GPIO_IMR (cpu_is_mx1_mx2() ? 0x30 : 0x14) +#define GPIO_ISR (cpu_is_mx1_mx2() ? 0x34 : 0x18) +#define GPIO_ISR (cpu_is_mx1_mx2() ? 0x34 : 0x18) + +#define GPIO_INT_LOW_LEV (cpu_is_mx1_mx2() ? 0x3 : 0x0) +#define GPIO_INT_HIGH_LEV (cpu_is_mx1_mx2() ? 0x2 : 0x1) +#define GPIO_INT_RISE_EDGE (cpu_is_mx1_mx2() ? 0x0 : 0x2) +#define GPIO_INT_FALL_EDGE (cpu_is_mx1_mx2() ? 0x1 : 0x3) +#define GPIO_INT_NONE 0x4 + /* Note: This driver assumes 32 GPIOs are handled in one register */ static void _clear_gpio_irqstatus(struct mxc_gpio_port *port, u32 index) diff --git a/arch/arm/plat-mxc/include/mach/mx1.h b/arch/arm/plat-mxc/include/mach/mx1.h index ee60d64728c..1b2890a5c45 100644 --- a/arch/arm/plat-mxc/include/mach/mx1.h +++ b/arch/arm/plat-mxc/include/mach/mx1.h @@ -134,20 +134,6 @@ #define GPIO_INT_PORTD 62 #define WDT_INT 63 -/* gpio and gpio based interrupt handling */ -#define GPIO_DR 0x1C -#define GPIO_GDIR 0x00 -#define GPIO_PSR 0x24 -#define GPIO_ICR1 0x28 -#define GPIO_ICR2 0x2C -#define GPIO_IMR 0x30 -#define GPIO_ISR 0x34 -#define GPIO_INT_LOW_LEV 0x3 -#define GPIO_INT_HIGH_LEV 0x2 -#define GPIO_INT_RISE_EDGE 0x0 -#define GPIO_INT_FALL_EDGE 0x1 -#define GPIO_INT_NONE 0x4 - /* DMA */ #define DMA_REQ_UART3_T 2 #define DMA_REQ_UART3_R 3 diff --git a/arch/arm/plat-mxc/include/mach/mx2x.h b/arch/arm/plat-mxc/include/mach/mx2x.h index 5982ae5a00d..db5d921e0fe 100644 --- a/arch/arm/plat-mxc/include/mach/mx2x.h +++ b/arch/arm/plat-mxc/include/mach/mx2x.h @@ -150,20 +150,6 @@ #define MXC_INT_GPIO 8 #define MXC_INT_CSPI3 6 -/* gpio and gpio based interrupt handling */ -#define GPIO_DR 0x1C -#define GPIO_GDIR 0x00 -#define GPIO_PSR 0x24 -#define GPIO_ICR1 0x28 -#define GPIO_ICR2 0x2C -#define GPIO_IMR 0x30 -#define GPIO_ISR 0x34 -#define GPIO_INT_LOW_LEV 0x3 -#define GPIO_INT_HIGH_LEV 0x2 -#define GPIO_INT_RISE_EDGE 0x0 -#define GPIO_INT_FALL_EDGE 0x1 -#define GPIO_INT_NONE 0x4 - /* fixed DMA request numbers */ #define DMA_REQ_CSI_RX 31 #define DMA_REQ_CSI_STAT 30 diff --git a/arch/arm/plat-mxc/include/mach/mx3x.h b/arch/arm/plat-mxc/include/mach/mx3x.h index 16f68e8f4cf..009f4440276 100644 --- a/arch/arm/plat-mxc/include/mach/mx3x.h +++ b/arch/arm/plat-mxc/include/mach/mx3x.h @@ -259,20 +259,6 @@ #define SYSTEM_REV_MIN CHIP_REV_1_0 #define SYSTEM_REV_NUM 3 -/* gpio and gpio based interrupt handling */ -#define GPIO_DR 0x00 -#define GPIO_GDIR 0x04 -#define GPIO_PSR 0x08 -#define GPIO_ICR1 0x0C -#define GPIO_ICR2 0x10 -#define GPIO_IMR 0x14 -#define GPIO_ISR 0x18 -#define GPIO_INT_LOW_LEV 0x0 -#define GPIO_INT_HIGH_LEV 0x1 -#define GPIO_INT_RISE_EDGE 0x2 -#define GPIO_INT_FALL_EDGE 0x3 -#define GPIO_INT_NONE 0x4 - /* Mandatory defines used globally */ #if !defined(__ASSEMBLY__) && !defined(__MXC_BOOT_UNCOMPRESS) -- cgit v1.2.3 From 5ef881bbecc72862fa379cb286a50f2781db4cec Mon Sep 17 00:00:00 2001 From: Sascha Hauer Date: Fri, 19 Jun 2009 11:35:08 +0200 Subject: MXC: pwm driver fixes - fix off-by-one error in divider calculation - disable pwm in pwm_disable Signed-off-by: Sascha Hauer --- arch/arm/plat-mxc/pwm.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/arch/arm/plat-mxc/pwm.c b/arch/arm/plat-mxc/pwm.c index ae34198a79d..42dd17b89ff 100644 --- a/arch/arm/plat-mxc/pwm.c +++ b/arch/arm/plat-mxc/pwm.c @@ -72,7 +72,7 @@ int pwm_config(struct pwm_device *pwm, int duty_ns, int period_ns) writel(duty_cycles, pwm->mmio_base + MX3_PWMSAR); writel(period_cycles, pwm->mmio_base + MX3_PWMPR); - writel(MX3_PWMCR_PRESCALER(prescale - 1) | + writel(MX3_PWMCR_PRESCALER(prescale) | MX3_PWMCR_CLKSRC_IPG_HIGH | MX3_PWMCR_EN, pwm->mmio_base + MX3_PWMCR); } else if (cpu_is_mx1() || cpu_is_mx21()) { @@ -118,6 +118,8 @@ EXPORT_SYMBOL(pwm_enable); void pwm_disable(struct pwm_device *pwm) { + writel(0, pwm->mmio_base + MX3_PWMCR); + if (pwm->clk_enabled) { clk_disable(pwm->clk); pwm->clk_enabled = 0; -- cgit v1.2.3 From 6d73665f052a8dadf6f33dfd2546e15199ad7c5f Mon Sep 17 00:00:00 2001 From: Sascha Hauer Date: Wed, 3 Jun 2009 11:22:32 +0200 Subject: MXC PLL decoding: calculate mfn value with less magic Also, use cpu_is_* macros rather than CONFIG_ARCH_* Signed-off-by: Sascha Hauer --- arch/arm/plat-mxc/clock.c | 16 +++++++++------- 1 file changed, 9 insertions(+), 7 deletions(-) diff --git a/arch/arm/plat-mxc/clock.c b/arch/arm/plat-mxc/clock.c index 92e13566cd4..f653213b741 100644 --- a/arch/arm/plat-mxc/clock.c +++ b/arch/arm/plat-mxc/clock.c @@ -39,6 +39,7 @@ #include #include +#include static LIST_HEAD(clocks); static DEFINE_MUTEX(clocks_mutex); @@ -363,12 +364,11 @@ unsigned long mxc_decode_pll(unsigned int reg_val, u32 freq) mfn_abs = mfn; -#if !defined CONFIG_ARCH_MX1 && !defined CONFIG_ARCH_MX21 - if (mfn >= 0x200) { - mfn |= 0xFFFFFE00; - mfn_abs = -mfn; - } -#endif + /* On all i.MXs except i.MX1 and i.MX21 mfn is a 10bit + * 2's complements number + */ + if (!cpu_is_mx1() && !cpu_is_mx21() && mfn >= 0x200) + mfn_abs = 0x400 - mfn; freq *= 2; freq /= pd + 1; @@ -376,8 +376,10 @@ unsigned long mxc_decode_pll(unsigned int reg_val, u32 freq) ll = (unsigned long long)freq * mfn_abs; do_div(ll, mfd + 1); - if (mfn < 0) + + if (!cpu_is_mx1() && !cpu_is_mx21() && mfn >= 0x200) ll = -ll; + ll = (freq * mfi) + ll; return ll; -- cgit v1.2.3 From 7dae1134cd4117c1a579f8ae58ce13c1c1ff7164 Mon Sep 17 00:00:00 2001 From: Sascha Hauer Date: Sat, 7 Feb 2009 13:34:01 +0100 Subject: [ARM] MXC: Switch MX1 to clkdev support Signed-off-by: Sascha Hauer --- arch/arm/mach-mx1/clock.c | 84 ++++++++++++++++------------------------------- arch/arm/plat-mxc/Kconfig | 1 + 2 files changed, 29 insertions(+), 56 deletions(-) diff --git a/arch/arm/mach-mx1/clock.c b/arch/arm/mach-mx1/clock.c index 7b739dd8700..d1b588519ad 100644 --- a/arch/arm/mach-mx1/clock.c +++ b/arch/arm/mach-mx1/clock.c @@ -18,11 +18,14 @@ #include #include +#include #include #include #include #include +#include + #include #include #include @@ -94,7 +97,6 @@ static unsigned long clk16m_get_rate(struct clk *clk) } static struct clk clk16m = { - .name = "CLK16M", .get_rate = clk16m_get_rate, .enable = _clk_enable, .enable_reg = CCM_CSCR, @@ -111,7 +113,6 @@ static unsigned long clk32_get_rate(struct clk *clk) } static struct clk clk32 = { - .name = "CLK32", .get_rate = clk32_get_rate, }; @@ -121,7 +122,6 @@ static unsigned long clk32_premult_get_rate(struct clk *clk) } static struct clk clk32_premult = { - .name = "CLK32_premultiplier", .parent = &clk32, .get_rate = clk32_premult_get_rate, }; @@ -156,7 +156,6 @@ static int prem_clk_set_parent(struct clk *clk, struct clk *parent) } static struct clk prem_clk = { - .name = "prem_clk", .set_parent = prem_clk_set_parent, }; @@ -167,7 +166,6 @@ static unsigned long system_clk_get_rate(struct clk *clk) } static struct clk system_clk = { - .name = "system_clk", .parent = &prem_clk, .get_rate = system_clk_get_rate, }; @@ -179,7 +177,6 @@ static unsigned long mcu_clk_get_rate(struct clk *clk) } static struct clk mcu_clk = { - .name = "mcu_clk", .parent = &clk32_premult, .get_rate = mcu_clk_get_rate, }; @@ -195,7 +192,6 @@ static unsigned long fclk_get_rate(struct clk *clk) } static struct clk fclk = { - .name = "fclk", .parent = &mcu_clk, .get_rate = fclk_get_rate, }; @@ -238,7 +234,6 @@ static int hclk_set_rate(struct clk *clk, unsigned long rate) } static struct clk hclk = { - .name = "hclk", .parent = &system_clk, .get_rate = hclk_get_rate, .round_rate = hclk_round_rate, @@ -280,7 +275,6 @@ static int clk48m_set_rate(struct clk *clk, unsigned long rate) } static struct clk clk48m = { - .name = "CLK48M", .parent = &system_clk, .get_rate = clk48m_get_rate, .round_rate = clk48m_round_rate, @@ -400,21 +394,18 @@ static int perclk3_set_rate(struct clk *clk, unsigned long rate) static struct clk perclk[] = { { - .name = "perclk", .id = 0, .parent = &system_clk, .get_rate = perclk1_get_rate, .round_rate = perclk1_round_rate, .set_rate = perclk1_set_rate, }, { - .name = "perclk", .id = 1, .parent = &system_clk, .get_rate = perclk2_get_rate, .round_rate = perclk2_round_rate, .set_rate = perclk2_set_rate, }, { - .name = "perclk", .id = 2, .parent = &system_clk, .get_rate = perclk3_get_rate, @@ -457,12 +448,10 @@ static int clko_set_parent(struct clk *clk, struct clk *parent) } static struct clk clko_clk = { - .name = "clko_clk", .set_parent = clko_set_parent, }; static struct clk dma_clk = { - .name = "dma", .parent = &hclk, .round_rate = _clk_parent_round_rate, .set_rate = _clk_parent_set_rate, @@ -473,7 +462,6 @@ static struct clk dma_clk = { }; static struct clk csi_clk = { - .name = "csi_clk", .parent = &hclk, .round_rate = _clk_parent_round_rate, .set_rate = _clk_parent_set_rate, @@ -484,7 +472,6 @@ static struct clk csi_clk = { }; static struct clk mma_clk = { - .name = "mma_clk", .parent = &hclk, .round_rate = _clk_parent_round_rate, .set_rate = _clk_parent_set_rate, @@ -495,7 +482,6 @@ static struct clk mma_clk = { }; static struct clk usbd_clk = { - .name = "usbd_clk", .parent = &clk48m, .round_rate = _clk_parent_round_rate, .set_rate = _clk_parent_set_rate, @@ -506,99 +492,85 @@ static struct clk usbd_clk = { }; static struct clk gpt_clk = { - .name = "gpt_clk", .parent = &perclk[0], .round_rate = _clk_parent_round_rate, .set_rate = _clk_parent_set_rate, }; static struct clk uart_clk = { - .name = "uart", .parent = &perclk[0], .round_rate = _clk_parent_round_rate, .set_rate = _clk_parent_set_rate, }; static struct clk i2c_clk = { - .name = "i2c_clk", .parent = &hclk, .round_rate = _clk_parent_round_rate, .set_rate = _clk_parent_set_rate, }; static struct clk spi_clk = { - .name = "spi_clk", .parent = &perclk[1], .round_rate = _clk_parent_round_rate, .set_rate = _clk_parent_set_rate, }; static struct clk sdhc_clk = { - .name = "sdhc_clk", .parent = &perclk[1], .round_rate = _clk_parent_round_rate, .set_rate = _clk_parent_set_rate, }; static struct clk lcdc_clk = { - .name = "lcdc_clk", .parent = &perclk[1], .round_rate = _clk_parent_round_rate, .set_rate = _clk_parent_set_rate, }; static struct clk mshc_clk = { - .name = "mshc_clk", .parent = &hclk, .round_rate = _clk_parent_round_rate, .set_rate = _clk_parent_set_rate, }; static struct clk ssi_clk = { - .name = "ssi_clk", .parent = &perclk[2], .round_rate = _clk_parent_round_rate, .set_rate = _clk_parent_set_rate, }; static struct clk rtc_clk = { - .name = "rtc_clk", .parent = &clk32, }; -static struct clk *mxc_clks[] = { - &clk16m, - &clk32, - &clk32_premult, - &prem_clk, - &system_clk, - &mcu_clk, - &fclk, - &hclk, - &clk48m, - &perclk[0], - &perclk[1], - &perclk[2], - &clko_clk, - &dma_clk, - &csi_clk, - &mma_clk, - &usbd_clk, - &gpt_clk, - &uart_clk, - &i2c_clk, - &spi_clk, - &sdhc_clk, - &lcdc_clk, - &mshc_clk, - &ssi_clk, - &rtc_clk, +#define _REGISTER_CLOCK(d, n, c) \ + { \ + .dev_id = d, \ + .con_id = n, \ + .clk = &c, \ + }, +static struct clk_lookup lookups[] __initdata = { + _REGISTER_CLOCK(NULL, "dma", dma_clk) + _REGISTER_CLOCK("mx1-camera.0", NULL, csi_clk) + _REGISTER_CLOCK(NULL, "mma", mma_clk) + _REGISTER_CLOCK("imx_udc.0", NULL, usbd_clk) + _REGISTER_CLOCK(NULL, "gpt", gpt_clk) + _REGISTER_CLOCK("imx-uart.0", NULL, uart_clk) + _REGISTER_CLOCK("imx-uart.1", NULL, uart_clk) + _REGISTER_CLOCK("imx-uart.2", NULL, uart_clk) + _REGISTER_CLOCK("imx-i2c.0", NULL, i2c_clk) + _REGISTER_CLOCK("spi_imx.0", NULL, spi_clk) + _REGISTER_CLOCK("imx-mmc.0", NULL, sdhc_clk) + _REGISTER_CLOCK("imx-fb.0", NULL, lcdc_clk) + _REGISTER_CLOCK(NULL, "mshc", mshc_clk) + _REGISTER_CLOCK(NULL, "ssi", ssi_clk) + _REGISTER_CLOCK("mxc_rtc.0", NULL, rtc_clk) }; int __init mx1_clocks_init(unsigned long fref) { - struct clk **clkp; unsigned int reg; + int i; /* disable clocks we are able to */ __raw_writel(0, SCM_GCCR); @@ -620,8 +592,8 @@ int __init mx1_clocks_init(unsigned long fref) reg = (reg & CCM_CSCR_CLKO_MASK) >> CCM_CSCR_CLKO_OFFSET; clko_clk.parent = (struct clk *)clko_clocks[reg]; - for (clkp = mxc_clks; clkp < mxc_clks + ARRAY_SIZE(mxc_clks); clkp++) - clk_register(*clkp); + for (i = 0; i < ARRAY_SIZE(lookups); i++) + clkdev_add(&lookups[i]); clk_enable(&hclk); clk_enable(&fclk); diff --git a/arch/arm/plat-mxc/Kconfig b/arch/arm/plat-mxc/Kconfig index 8986b741223..0617c19f85c 100644 --- a/arch/arm/plat-mxc/Kconfig +++ b/arch/arm/plat-mxc/Kconfig @@ -9,6 +9,7 @@ choice config ARCH_MX1 bool "MX1-based" select CPU_ARM920T + select COMMON_CLKDEV help This enables support for systems based on the Freescale i.MX1 family -- cgit v1.2.3 From 5e63ff9a973a19b78bb0eef22df8946b36e09f0f Mon Sep 17 00:00:00 2001 From: Sascha Hauer Date: Sat, 7 Feb 2009 13:37:29 +0100 Subject: [ARM] MXC: remove the now unused #ifndef CONFIG_COMMON_CLKDEV Signed-off-by: Sascha Hauer --- arch/arm/plat-mxc/clock.c | 154 ---------------------------------------------- 1 file changed, 154 deletions(-) diff --git a/arch/arm/plat-mxc/clock.c b/arch/arm/plat-mxc/clock.c index f653213b741..9e8fbd57495 100644 --- a/arch/arm/plat-mxc/clock.c +++ b/arch/arm/plat-mxc/clock.c @@ -48,76 +48,6 @@ static DEFINE_MUTEX(clocks_mutex); * Standard clock functions defined in include/linux/clk.h *-------------------------------------------------------------------------*/ -/* - * All the code inside #ifndef CONFIG_COMMON_CLKDEV can be removed once all - * MXC architectures have switched to using clkdev. - */ -#ifndef CONFIG_COMMON_CLKDEV -/* - * Retrieve a clock by name. - * - * Note that we first try to use device id on the bus - * and clock name. If this fails, we try to use ".". If this fails, - * we try to use clock name only. - * The reference count to the clock's module owner ref count is incremented. - */ -struct clk *clk_get(struct device *dev, const char *id) -{ - struct clk *p, *clk = ERR_PTR(-ENOENT); - int idno; - const char *str; - - if (id == NULL) - return clk; - - if (dev == NULL || dev->bus != &platform_bus_type) - idno = -1; - else - idno = to_platform_device(dev)->id; - - mutex_lock(&clocks_mutex); - - list_for_each_entry(p, &clocks, node) { - if (p->id == idno && - strcmp(id, p->name) == 0 && try_module_get(p->owner)) { - clk = p; - goto found; - } - } - - str = strrchr(id, '.'); - if (str) { - int cnt = str - id; - str++; - idno = simple_strtol(str, NULL, 10); - list_for_each_entry(p, &clocks, node) { - if (p->id == idno && - strlen(p->name) == cnt && - strncmp(id, p->name, cnt) == 0 && - try_module_get(p->owner)) { - clk = p; - goto found; - } - } - } - - list_for_each_entry(p, &clocks, node) { - if (strcmp(id, p->name) == 0 && try_module_get(p->owner)) { - clk = p; - goto found; - } - } - - printk(KERN_WARNING "clk: Unable to get requested clock: %s\n", id); - -found: - mutex_unlock(&clocks_mutex); - - return clk; -} -EXPORT_SYMBOL(clk_get); -#endif - static void __clk_disable(struct clk *clk) { if (clk == NULL || IS_ERR(clk)) @@ -194,16 +124,6 @@ unsigned long clk_get_rate(struct clk *clk) } EXPORT_SYMBOL(clk_get_rate); -#ifndef CONFIG_COMMON_CLKDEV -/* Decrement the clock's module reference count */ -void clk_put(struct clk *clk) -{ - if (clk && !IS_ERR(clk)) - module_put(clk->owner); -} -EXPORT_SYMBOL(clk_put); -#endif - /* Round the requested clock rate to the nearest supported * rate that is less than or equal to the requested rate. * This is dependent on the clock's current parent. @@ -266,80 +186,6 @@ struct clk *clk_get_parent(struct clk *clk) } EXPORT_SYMBOL(clk_get_parent); -#ifndef CONFIG_COMMON_CLKDEV -/* - * Add a new clock to the clock tree. - */ -int clk_register(struct clk *clk) -{ - if (clk == NULL || IS_ERR(clk)) - return -EINVAL; - - mutex_lock(&clocks_mutex); - list_add(&clk->node, &clocks); - mutex_unlock(&clocks_mutex); - - return 0; -} -EXPORT_SYMBOL(clk_register); - -/* Remove a clock from the clock tree */ -void clk_unregister(struct clk *clk) -{ - if (clk == NULL || IS_ERR(clk)) - return; - - mutex_lock(&clocks_mutex); - list_del(&clk->node); - mutex_unlock(&clocks_mutex); -} -EXPORT_SYMBOL(clk_unregister); - -#ifdef CONFIG_PROC_FS -static int mxc_clock_read_proc(char *page, char **start, off_t off, - int count, int *eof, void *data) -{ - struct clk *clkp; - char *p = page; - int len; - - list_for_each_entry(clkp, &clocks, node) { - p += sprintf(p, "%s-%d:\t\t%lu, %d", clkp->name, clkp->id, - clk_get_rate(clkp), clkp->usecount); - if (clkp->parent) - p += sprintf(p, ", %s-%d\n", clkp->parent->name, - clkp->parent->id); - else - p += sprintf(p, "\n"); - } - - len = (p - page) - off; - if (len < 0) - len = 0; - - *eof = (len <= count) ? 1 : 0; - *start = page + off; - - return len; -} - -static int __init mxc_setup_proc_entry(void) -{ - struct proc_dir_entry *res; - - res = create_proc_read_entry("cpu/clocks", 0, NULL, - mxc_clock_read_proc, NULL); - if (!res) { - printk(KERN_ERR "Failed to create proc/cpu/clocks\n"); - return -ENOMEM; - } - return 0; -} - -late_initcall(mxc_setup_proc_entry); -#endif /* CONFIG_PROC_FS */ -#endif - /* * Get the resulting clock rate from a PLL register value and the input * frequency. PLLs with this register layout can at least be found on -- cgit v1.2.3 From c13a482c43a148c2b8060b405fc39a4b214d56d2 Mon Sep 17 00:00:00 2001 From: Daniel Mack Date: Thu, 25 Jun 2009 14:11:50 +0200 Subject: MX3: Add USB platform devices and resources Signed-off-by: Sascha Hauer Signed-off-by: Daniel Mack Signed-off-by: Sascha Hauer --- arch/arm/mach-mx3/devices.c | 65 +++++++++++++++++++++++++++++++++++++++++++++ arch/arm/mach-mx3/devices.h | 3 +++ 2 files changed, 68 insertions(+) diff --git a/arch/arm/mach-mx3/devices.c b/arch/arm/mach-mx3/devices.c index 7a5c2ef52a4..4e728a29196 100644 --- a/arch/arm/mach-mx3/devices.c +++ b/arch/arm/mach-mx3/devices.c @@ -390,6 +390,71 @@ struct platform_device mxc_otg_udc_device = { .num_resources = ARRAY_SIZE(otg_resources), }; +/* OTG host */ +struct platform_device mxc_otg_host = { + .name = "mxc-ehci", + .id = 0, + .dev = { + .coherent_dma_mask = 0xffffffff, + .dma_mask = &otg_dmamask, + }, + .resource = otg_resources, + .num_resources = ARRAY_SIZE(otg_resources), +}; + +/* USB host 1 */ + +static u64 usbh1_dmamask = ~(u32)0; + +static struct resource mxc_usbh1_resources[] = { + { + .start = OTG_BASE_ADDR + 0x200, + .end = OTG_BASE_ADDR + 0x3ff, + .flags = IORESOURCE_MEM, + }, { + .start = MXC_INT_USB1, + .end = MXC_INT_USB1, + .flags = IORESOURCE_IRQ, + }, +}; + +struct platform_device mxc_usbh1 = { + .name = "mxc-ehci", + .id = 1, + .dev = { + .coherent_dma_mask = 0xffffffff, + .dma_mask = &usbh1_dmamask, + }, + .resource = mxc_usbh1_resources, + .num_resources = ARRAY_SIZE(mxc_usbh1_resources), +}; + +/* USB host 2 */ +static u64 usbh2_dmamask = ~(u32)0; + +static struct resource mxc_usbh2_resources[] = { + { + .start = OTG_BASE_ADDR + 0x400, + .end = OTG_BASE_ADDR + 0x5ff, + .flags = IORESOURCE_MEM, + }, { + .start = MXC_INT_USB2, + .end = MXC_INT_USB2, + .flags = IORESOURCE_IRQ, + }, +}; + +struct platform_device mxc_usbh2 = { + .name = "mxc-ehci", + .id = 2, + .dev = { + .coherent_dma_mask = 0xffffffff, + .dma_mask = &usbh2_dmamask, + }, + .resource = mxc_usbh2_resources, + .num_resources = ARRAY_SIZE(mxc_usbh2_resources), +}; + #ifdef CONFIG_ARCH_MX35 static struct resource mxc_fec_resources[] = { { diff --git a/arch/arm/mach-mx3/devices.h b/arch/arm/mach-mx3/devices.h index ffd494ddd4a..81614319755 100644 --- a/arch/arm/mach-mx3/devices.h +++ b/arch/arm/mach-mx3/devices.h @@ -16,5 +16,8 @@ extern struct platform_device mxc_fec_device; extern struct platform_device mxcsdhc_device0; extern struct platform_device mxcsdhc_device1; extern struct platform_device mxc_otg_udc_device; +extern struct platform_device mxc_otg_host; +extern struct platform_device mxc_usbh1; +extern struct platform_device mxc_usbh2; extern struct platform_device mxc_rnga_device; -- cgit v1.2.3 From 6558f985a1ff7ab2b413f49ee8766c919495e0ac Mon Sep 17 00:00:00 2001 From: Sascha Hauer Date: Thu, 25 Jun 2009 14:11:51 +0200 Subject: ehci mxc: Fix clocks Signed-off-by: Sascha Hauer --- arch/arm/mach-mx3/clock.c | 6 ++++++ 1 file changed, 6 insertions(+) diff --git a/arch/arm/mach-mx3/clock.c b/arch/arm/mach-mx3/clock.c index 25b6f55bfb0..2b29491c22b 100644 --- a/arch/arm/mach-mx3/clock.c +++ b/arch/arm/mach-mx3/clock.c @@ -532,6 +532,12 @@ static struct clk_lookup lookups[] = { _REGISTER_CLOCK("ipu-core", NULL, ipu_clk) _REGISTER_CLOCK("mx3_sdc_fb", NULL, ipu_clk) _REGISTER_CLOCK(NULL, "kpp", kpp_clk) + _REGISTER_CLOCK("mxc-ehci.0", "usb", usb_clk1) + _REGISTER_CLOCK("mxc-ehci.0", "usb_ahb", usb_clk2) + _REGISTER_CLOCK("mxc-ehci.1", "usb", usb_clk1) + _REGISTER_CLOCK("mxc-ehci.1", "usb_ahb", usb_clk2) + _REGISTER_CLOCK("mxc-ehci.2", "usb", usb_clk1) + _REGISTER_CLOCK("mxc-ehci.2", "usb_ahb", usb_clk2) _REGISTER_CLOCK("fsl-usb2-udc", "usb", usb_clk1) _REGISTER_CLOCK("fsl-usb2-udc", "usb_ahb", usb_clk2) _REGISTER_CLOCK("mx3-camera.0", NULL, csi_clk) -- cgit v1.2.3 From 88e29a8d21fb9687ad6972a44571b295acaf0d74 Mon Sep 17 00:00:00 2001 From: Daniel Mack Date: Thu, 25 Jun 2009 14:11:52 +0200 Subject: MX3: add additional USB pins to iomux Signed-off-by: Daniel Mack Signed-off-by: Sascha Hauer --- arch/arm/plat-mxc/include/mach/iomux-mx3.h | 13 +++++++++++++ 1 file changed, 13 insertions(+) diff --git a/arch/arm/plat-mxc/include/mach/iomux-mx3.h b/arch/arm/plat-mxc/include/mach/iomux-mx3.h index 2eb182f7387..a3b206ce78b 100644 --- a/arch/arm/plat-mxc/include/mach/iomux-mx3.h +++ b/arch/arm/plat-mxc/include/mach/iomux-mx3.h @@ -635,6 +635,19 @@ enum iomux_pins { #define MX31_PIN_USBOTG_DIR__USBOTG_DIR IOMUX_MODE(MX31_PIN_USBOTG_DIR, IOMUX_CONFIG_FUNC) #define MX31_PIN_USBOTG_NXT__USBOTG_NXT IOMUX_MODE(MX31_PIN_USBOTG_NXT, IOMUX_CONFIG_FUNC) #define MX31_PIN_USBOTG_STP__USBOTG_STP IOMUX_MODE(MX31_PIN_USBOTG_STP, IOMUX_CONFIG_FUNC) +#define MX31_PIN_CSPI1_MOSI__USBH1_RXDM IOMUX_MODE(MX31_PIN_CSPI1_MOSI, IOMUX_CONFIG_ALT1) +#define MX31_PIN_CSPI1_MISO__USBH1_RXDP IOMUX_MODE(MX31_PIN_CSPI1_MISO, IOMUX_CONFIG_ALT1) +#define MX31_PIN_CSPI1_SS0__USBH1_TXDM IOMUX_MODE(MX31_PIN_CSPI1_SS0, IOMUX_CONFIG_ALT1) +#define MX31_PIN_CSPI1_SS1__USBH1_TXDP IOMUX_MODE(MX31_PIN_CSPI1_SS1, IOMUX_CONFIG_ALT1) +#define MX31_PIN_CSPI1_SS2__USBH1_RCV IOMUX_MODE(MX31_PIN_CSPI1_SS2, IOMUX_CONFIG_ALT1) +#define MX31_PIN_CSPI1_SCLK__USBH1_OEB IOMUX_MODE(MX31_PIN_CSPI1_SCLK, IOMUX_CONFIG_ALT1) +#define MX31_PIN_CSPI1_SPI_RDY__USBH1_FS IOMUX_MODE(MX31_PIN_CSPI1_SPI_RDY, IOMUX_CONFIG_ALT1) +#define MX31_PIN_USBH2_DATA0__USBH2_DATA0 IOMUX_MODE(MX31_PIN_USBH2_DATA0, IOMUX_CONFIG_FUNC) +#define MX31_PIN_USBH2_DATA1__USBH2_DATA1 IOMUX_MODE(MX31_PIN_USBH2_DATA1, IOMUX_CONFIG_FUNC) +#define MX31_PIN_USBH2_CLK__USBH2_CLK IOMUX_MODE(MX31_PIN_USBH2_CLK, IOMUX_CONFIG_FUNC) +#define MX31_PIN_USBH2_DIR__USBH2_DIR IOMUX_MODE(MX31_PIN_USBH2_DIR, IOMUX_CONFIG_FUNC) +#define MX31_PIN_USBH2_NXT__USBH2_NXT IOMUX_MODE(MX31_PIN_USBH2_NXT, IOMUX_CONFIG_FUNC) +#define MX31_PIN_USBH2_STP__USBH2_STP IOMUX_MODE(MX31_PIN_USBH2_STP, IOMUX_CONFIG_FUNC) #define MX31_PIN_USB_OC__GPIO1_30 IOMUX_MODE(MX31_PIN_USB_OC, IOMUX_CONFIG_GPIO) #define MX31_PIN_I2C_DAT__I2C1_SDA IOMUX_MODE(MX31_PIN_I2C_DAT, IOMUX_CONFIG_FUNC) #define MX31_PIN_I2C_CLK__I2C1_SCL IOMUX_MODE(MX31_PIN_I2C_CLK, IOMUX_CONFIG_FUNC) -- cgit v1.2.3 From 627fb3b9d260cb413d0ea2d179e319a20e2bd82b Mon Sep 17 00:00:00 2001 From: javier Martin Date: Wed, 15 Jul 2009 15:26:21 +0200 Subject: MX27: Add USB platform devices and resources This adds clocks and resources for usb in i.mx27 SoC. Signed-off-by: Javier Martin Signed-off-by: Sascha Hauer --- arch/arm/mach-mx2/clock_imx27.c | 9 +++- arch/arm/mach-mx2/devices.c | 92 +++++++++++++++++++++++++++++++++++++++++ arch/arm/mach-mx2/devices.h | 4 ++ 3 files changed, 104 insertions(+), 1 deletion(-) diff --git a/arch/arm/mach-mx2/clock_imx27.c b/arch/arm/mach-mx2/clock_imx27.c index a0c577f80d4..4089951acb4 100644 --- a/arch/arm/mach-mx2/clock_imx27.c +++ b/arch/arm/mach-mx2/clock_imx27.c @@ -643,7 +643,14 @@ static struct clk_lookup lookups[] = { _REGISTER_CLOCK(NULL, "cspi3", cspi3_clk) _REGISTER_CLOCK("imx-fb.0", NULL, lcdc_clk) _REGISTER_CLOCK(NULL, "csi", csi_clk) - _REGISTER_CLOCK(NULL, "usb", usb_clk) + _REGISTER_CLOCK("fsl-usb2-udc", "usb", usb_clk) + _REGISTER_CLOCK("fsl-usb2-udc", "usb_ahb", usb_clk1) + _REGISTER_CLOCK("mxc-ehci.0", "usb", usb_clk) + _REGISTER_CLOCK("mxc-ehci.0", "usb_ahb", usb_clk1) + _REGISTER_CLOCK("mxc-ehci.1", "usb", usb_clk) + _REGISTER_CLOCK("mxc-ehci.1", "usb_ahb", usb_clk1) + _REGISTER_CLOCK("mxc-ehci.2", "usb", usb_clk) + _REGISTER_CLOCK("mxc-ehci.2", "usb_ahb", usb_clk1) _REGISTER_CLOCK(NULL, "ssi1", ssi1_clk) _REGISTER_CLOCK(NULL, "ssi2", ssi2_clk) _REGISTER_CLOCK("mxc_nand.0", NULL, nfc_clk) diff --git a/arch/arm/mach-mx2/devices.c b/arch/arm/mach-mx2/devices.c index cbf42467466..4ecf0977beb 100644 --- a/arch/arm/mach-mx2/devices.c +++ b/arch/arm/mach-mx2/devices.c @@ -369,6 +369,98 @@ struct platform_device mxc_sdhc_device1 = { .resource = mxc_sdhc2_resources, }; +static struct resource otg_resources[] = { + { + .start = OTG_BASE_ADDR, + .end = OTG_BASE_ADDR + 0x1ff, + .flags = IORESOURCE_MEM, + }, { + .start = MXC_INT_USB3, + .end = MXC_INT_USB3, + .flags = IORESOURCE_IRQ, + }, +}; + +static u64 otg_dmamask = 0xffffffffUL; + +/* OTG gadget device */ +struct platform_device mxc_otg_udc_device = { + .name = "fsl-usb2-udc", + .id = -1, + .dev = { + .dma_mask = &otg_dmamask, + .coherent_dma_mask = 0xffffffffUL, + }, + .resource = otg_resources, + .num_resources = ARRAY_SIZE(otg_resources), +}; + +/* OTG host */ +struct platform_device mxc_otg_host = { + .name = "mxc-ehci", + .id = 0, + .dev = { + .coherent_dma_mask = 0xffffffff, + .dma_mask = &otg_dmamask, + }, + .resource = otg_resources, + .num_resources = ARRAY_SIZE(otg_resources), +}; + +/* USB host 1 */ + +static u64 usbh1_dmamask = 0xffffffffUL; + +static struct resource mxc_usbh1_resources[] = { + { + .start = OTG_BASE_ADDR + 0x200, + .end = OTG_BASE_ADDR + 0x3ff, + .flags = IORESOURCE_MEM, + }, { + .start = MXC_INT_USB1, + .end = MXC_INT_USB1, + .flags = IORESOURCE_IRQ, + }, +}; + +struct platform_device mxc_usbh1 = { + .name = "mxc-ehci", + .id = 1, + .dev = { + .coherent_dma_mask = 0xffffffff, + .dma_mask = &usbh1_dmamask, + }, + .resource = mxc_usbh1_resources, + .num_resources = ARRAY_SIZE(mxc_usbh1_resources), +}; + +/* USB host 2 */ +static u64 usbh2_dmamask = 0xffffffffUL; + +static struct resource mxc_usbh2_resources[] = { + { + .start = OTG_BASE_ADDR + 0x400, + .end = OTG_BASE_ADDR + 0x5ff, + .flags = IORESOURCE_MEM, + }, { + .start = MXC_INT_USB2, + .end = MXC_INT_USB2, + .flags = IORESOURCE_IRQ, + }, +}; + +struct platform_device mxc_usbh2 = { + .name = "mxc-ehci", + .id = 2, + .dev = { + .coherent_dma_mask = 0xffffffff, + .dma_mask = &usbh2_dmamask, + }, + .resource = mxc_usbh2_resources, + .num_resources = ARRAY_SIZE(mxc_usbh2_resources), +}; + + /* GPIO port description */ static struct mxc_gpio_port imx_gpio_ports[] = { { diff --git a/arch/arm/mach-mx2/devices.h b/arch/arm/mach-mx2/devices.h index c79ba7fed1b..6e91b4e3509 100644 --- a/arch/arm/mach-mx2/devices.h +++ b/arch/arm/mach-mx2/devices.h @@ -19,3 +19,7 @@ extern struct platform_device mxc_i2c_device0; extern struct platform_device mxc_i2c_device1; extern struct platform_device mxc_sdhc_device0; extern struct platform_device mxc_sdhc_device1; +extern struct platform_device mxc_otg_udc_device; +extern struct platform_device mxc_otg_host; +extern struct platform_device mxc_usbh1; +extern struct platform_device mxc_usbh2; -- cgit v1.2.3 From af5b1df7136570dae9ac4c1cd193053c61b0ed8f Mon Sep 17 00:00:00 2001 From: Eric Benard Date: Thu, 16 Jul 2009 16:26:33 +0200 Subject: Add support for Eukrea's CPUIMX27 CPUIMX27 is built around Freescale's i.MX27 and has up to 64MB of NOR Flash, up to 512MB of NAND Flash and up to 256MB of mDDR, it includes an ethernet PHY in MII mode, an I2C RTC and a ST16554 QuadUART on nCS3. Signed-off-by: Eric Benard Signed-off-by: Sascha Hauer --- arch/arm/mach-mx2/Kconfig | 14 ++ arch/arm/mach-mx2/Makefile | 2 +- arch/arm/mach-mx2/eukrea_cpuimx27.c | 235 +++++++++++++++++++++ .../plat-mxc/include/mach/board-eukrea_cpuimx27.h | 25 +++ 4 files changed, 275 insertions(+), 1 deletion(-) create mode 100644 arch/arm/mach-mx2/eukrea_cpuimx27.c create mode 100644 arch/arm/plat-mxc/include/mach/board-eukrea_cpuimx27.h diff --git a/arch/arm/mach-mx2/Kconfig b/arch/arm/mach-mx2/Kconfig index c77da586b71..2c2be3953d8 100644 --- a/arch/arm/mach-mx2/Kconfig +++ b/arch/arm/mach-mx2/Kconfig @@ -53,6 +53,20 @@ config MACH_PCM970_BASEBOARD endchoice +config MACH_EUKREA_CPUIMX27 + bool "Eukrea CPUIMX27 module" + depends on MACH_MX27 + help + Include support for Eukrea CPUIMX27 platform. This includes + specific configurations for the module and its peripherals. + +config MACH_EUKREA_CPUIMX27_USESDHC2 + bool "CPUIMX27 integrates SDHC2 module" + depends on MACH_EUKREA_CPUIMX27 + help + This adds support for the internal SDHC2 used on CPUIMX27 used + for wifi or eMMC. + config MACH_MX27_3DS bool "MX27PDK platform" depends on MACH_MX27 diff --git a/arch/arm/mach-mx2/Makefile b/arch/arm/mach-mx2/Makefile index b9b1cca4e9b..e12490f670d 100644 --- a/arch/arm/mach-mx2/Makefile +++ b/arch/arm/mach-mx2/Makefile @@ -17,4 +17,4 @@ obj-$(CONFIG_MACH_PCM038) += pcm038.o obj-$(CONFIG_MACH_PCM970_BASEBOARD) += pcm970-baseboard.o obj-$(CONFIG_MACH_MX27_3DS) += mx27pdk.o obj-$(CONFIG_MACH_MX27LITE) += mx27lite.o - +obj-$(CONFIG_MACH_EUKREA_CPUIMX27) += eukrea_cpuimx27.o diff --git a/arch/arm/mach-mx2/eukrea_cpuimx27.c b/arch/arm/mach-mx2/eukrea_cpuimx27.c new file mode 100644 index 00000000000..a2c4181892c --- /dev/null +++ b/arch/arm/mach-mx2/eukrea_cpuimx27.c @@ -0,0 +1,235 @@ +/* + * Copyright (C) 2009 Eric Benard - eric@eukrea.com + * + * Based on pcm038.c which is : + * Copyright 2007 Robert Schwebel , Pengutronix + * Copyright (C) 2008 Juergen Beisert (kernel@pengutronix.de) + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version 2 + * of the License, or (at your option) any later version. + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, + * MA 02110-1301, USA. + */ + +#include +#include +#include +#include +#include +#include + +#include +#include +#include +#include + +#include +#include +#include +#include +#include +#include +#include + +#include "devices.h" + +static int eukrea_cpuimx27_pins[] = { + /* UART1 */ + PE12_PF_UART1_TXD, + PE13_PF_UART1_RXD, + PE14_PF_UART1_CTS, + PE15_PF_UART1_RTS, + /* UART4 */ + PB26_AF_UART4_RTS, + PB28_AF_UART4_TXD, + PB29_AF_UART4_CTS, + PB31_AF_UART4_RXD, + /* FEC */ + PD0_AIN_FEC_TXD0, + PD1_AIN_FEC_TXD1, + PD2_AIN_FEC_TXD2, + PD3_AIN_FEC_TXD3, + PD4_AOUT_FEC_RX_ER, + PD5_AOUT_FEC_RXD1, + PD6_AOUT_FEC_RXD2, + PD7_AOUT_FEC_RXD3, + PD8_AF_FEC_MDIO, + PD9_AIN_FEC_MDC, + PD10_AOUT_FEC_CRS, + PD11_AOUT_FEC_TX_CLK, + PD12_AOUT_FEC_RXD0, + PD13_AOUT_FEC_RX_DV, + PD14_AOUT_FEC_RX_CLK, + PD15_AOUT_FEC_COL, + PD16_AIN_FEC_TX_ER, + PF23_AIN_FEC_TX_EN, + /* I2C1 */ + PD17_PF_I2C_DATA, + PD18_PF_I2C_CLK, + /* SDHC2 */ + PB4_PF_SD2_D0, + PB5_PF_SD2_D1, + PB6_PF_SD2_D2, + PB7_PF_SD2_D3, + PB8_PF_SD2_CMD, + PB9_PF_SD2_CLK, +#if defined(CONFIG_SERIAL_8250) || defined(CONFIG_SERIAL_8250_MODULE) + /* Quad UART's IRQ */ + GPIO_PORTD | 22 | GPIO_GPIO | GPIO_IN, + GPIO_PORTD | 23 | GPIO_GPIO | GPIO_IN, + GPIO_PORTD | 27 | GPIO_GPIO | GPIO_IN, + GPIO_PORTD | 30 | GPIO_GPIO | GPIO_IN, +#endif +}; + +static struct physmap_flash_data eukrea_cpuimx27_flash_data = { + .width = 2, +}; + +static struct resource eukrea_cpuimx27_flash_resource = { + .start = 0xc0000000, + .end = 0xc3ffffff, + .flags = IORESOURCE_MEM, +}; + +static struct platform_device eukrea_cpuimx27_nor_mtd_device = { + .name = "physmap-flash", + .id = 0, + .dev = { + .platform_data = &eukrea_cpuimx27_flash_data, + }, + .num_resources = 1, + .resource = &eukrea_cpuimx27_flash_resource, +}; + +static struct imxuart_platform_data uart_pdata[] = { + { + .flags = IMXUART_HAVE_RTSCTS, + }, { + .flags = IMXUART_HAVE_RTSCTS, + }, +}; + +static struct mxc_nand_platform_data eukrea_cpuimx27_nand_board_info = { + .width = 1, + .hw_ecc = 1, +}; + +static struct platform_device *platform_devices[] __initdata = { + &eukrea_cpuimx27_nor_mtd_device, + &mxc_fec_device, +}; + +static struct imxi2c_platform_data eukrea_cpuimx27_i2c_1_data = { + .bitrate = 100000, +}; + +static struct i2c_board_info eukrea_cpuimx27_i2c_devices[] = { + { + I2C_BOARD_INFO("rtc-pcf8563", 0x51), + .type = "pcf8563" + }, +}; + +#if defined(CONFIG_SERIAL_8250) || defined(CONFIG_SERIAL_8250_MODULE) +static struct plat_serial8250_port serial_platform_data[] = { + { + .mapbase = (unsigned long)(CS3_BASE_ADDR + 0x200000), + .irq = IRQ_GPIOB(23), + .uartclk = 14745600, + .regshift = 1, + .iotype = UPIO_MEM, + .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST | UPF_IOREMAP, + }, { + .mapbase = (unsigned long)(CS3_BASE_ADDR + 0x400000), + .irq = IRQ_GPIOB(22), + .uartclk = 14745600, + .regshift = 1, + .iotype = UPIO_MEM, + .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST | UPF_IOREMAP, + }, { + .mapbase = (unsigned long)(CS3_BASE_ADDR + 0x800000), + .irq = IRQ_GPIOB(27), + .uartclk = 14745600, + .regshift = 1, + .iotype = UPIO_MEM, + .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST | UPF_IOREMAP, + }, { + .mapbase = (unsigned long)(CS3_BASE_ADDR + 0x1000000), + .irq = IRQ_GPIOB(30), + .uartclk = 14745600, + .regshift = 1, + .iotype = UPIO_MEM, + .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST | UPF_IOREMAP, + }, { + } +}; + +static struct platform_device serial_device = { + .name = "serial8250", + .id = 0, + .dev = { + .platform_data = serial_platform_data, + }, +}; +#endif + +static void __init eukrea_cpuimx27_init(void) +{ + mxc_gpio_setup_multiple_pins(eukrea_cpuimx27_pins, + ARRAY_SIZE(eukrea_cpuimx27_pins), "CPUIMX27"); + + mxc_register_device(&mxc_uart_device0, &uart_pdata[0]); + + mxc_register_device(&mxc_nand_device, &eukrea_cpuimx27_nand_board_info); + + i2c_register_board_info(0, eukrea_cpuimx27_i2c_devices, + ARRAY_SIZE(eukrea_cpuimx27_i2c_devices)); + + mxc_register_device(&mxc_i2c_device0, &eukrea_cpuimx27_i2c_1_data); + + platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices)); + +#if defined(CONFIG_MACH_EUKREA_CPUIMX27_USESDHC2) + /* SDHC2 can be used for Wifi */ + mxc_register_device(&mxc_sdhc_device1, NULL); + /* in which case UART4 is also used for Bluetooth */ + mxc_register_device(&mxc_uart_device3, &uart_pdata[1]); +#endif + +#if defined(CONFIG_SERIAL_8250) || defined(CONFIG_SERIAL_8250_MODULE) + platform_device_register(&serial_device); +#endif + +#ifdef CONFIG_MACH_EUKREA_MBIMX27_BASEBOARD + eukrea_mbimx27_baseboard_init(); +#endif +} + +static void __init eukrea_cpuimx27_timer_init(void) +{ + mx27_clocks_init(26000000); +} + +static struct sys_timer eukrea_cpuimx27_timer = { + .init = eukrea_cpuimx27_timer_init, +}; + +MACHINE_START(CPUIMX27, "EUKREA CPUIMX27") + .phys_io = AIPI_BASE_ADDR, + .io_pg_offst = ((AIPI_BASE_ADDR_VIRT) >> 18) & 0xfffc, + .boot_params = PHYS_OFFSET + 0x100, + .map_io = mx27_map_io, + .init_irq = mx27_init_irq, + .init_machine = eukrea_cpuimx27_init, + .timer = &eukrea_cpuimx27_timer, +MACHINE_END diff --git a/arch/arm/plat-mxc/include/mach/board-eukrea_cpuimx27.h b/arch/arm/plat-mxc/include/mach/board-eukrea_cpuimx27.h new file mode 100644 index 00000000000..91bcce65469 --- /dev/null +++ b/arch/arm/plat-mxc/include/mach/board-eukrea_cpuimx27.h @@ -0,0 +1,25 @@ +/* + * Copyright (C) 2009 Eric Benard - eric@eukrea.com + * + * Based on board-pcm038.h which is : + * Copyright (C) 2008 Juergen Beisert (kernel@pengutronix.de) + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version 2 + * of the License, or (at your option) any later version. + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, + * MA 02110-1301, USA. + */ + +#ifndef __ASM_ARCH_MXC_BOARD_EUKREA_CPUIMX27_H__ +#define __ASM_ARCH_MXC_BOARD_EUKREA_CPUIMX27_H__ + +#endif /* __ASM_ARCH_MXC_BOARD_EUKREA_CPUIMX27_H__ */ -- cgit v1.2.3 From a961bf380b93741c2191f8efc8f5f1c65224b216 Mon Sep 17 00:00:00 2001 From: Eric Benard Date: Thu, 16 Jul 2009 16:26:34 +0200 Subject: Add support for Eukrea's MBIMX27 MBIMX27 is the evaluation board for CPUIMX27 and integrates : a QVGA TFT, a SPI touchscreen controler, a SDCard connector wired to SDHC1. Signed-off-by: Eric Benard Signed-off-by: Sascha Hauer --- arch/arm/mach-mx2/Kconfig | 14 ++ arch/arm/mach-mx2/Makefile | 1 + arch/arm/mach-mx2/eukrea_mbimx27-baseboard.c | 249 +++++++++++++++++++++ .../plat-mxc/include/mach/board-eukrea_cpuimx27.h | 15 ++ 4 files changed, 279 insertions(+) create mode 100644 arch/arm/mach-mx2/eukrea_mbimx27-baseboard.c diff --git a/arch/arm/mach-mx2/Kconfig b/arch/arm/mach-mx2/Kconfig index 2c2be3953d8..0c28a37bc14 100644 --- a/arch/arm/mach-mx2/Kconfig +++ b/arch/arm/mach-mx2/Kconfig @@ -67,6 +67,20 @@ config MACH_EUKREA_CPUIMX27_USESDHC2 This adds support for the internal SDHC2 used on CPUIMX27 used for wifi or eMMC. +choice + prompt "Baseboard" + depends on MACH_EUKREA_CPUIMX27 + default MACH_EUKREA_MBIMX27_BASEBOARD + +config MACH_EUKREA_MBIMX27_BASEBOARD + prompt "Eukrea MBIMX27 development board" + bool + help + This adds board specific devices that can be found on Eukrea's + MBIMX27 evaluation board. + +endchoice + config MACH_MX27_3DS bool "MX27PDK platform" depends on MACH_MX27 diff --git a/arch/arm/mach-mx2/Makefile b/arch/arm/mach-mx2/Makefile index e12490f670d..8b6846c4226 100644 --- a/arch/arm/mach-mx2/Makefile +++ b/arch/arm/mach-mx2/Makefile @@ -18,3 +18,4 @@ obj-$(CONFIG_MACH_PCM970_BASEBOARD) += pcm970-baseboard.o obj-$(CONFIG_MACH_MX27_3DS) += mx27pdk.o obj-$(CONFIG_MACH_MX27LITE) += mx27lite.o obj-$(CONFIG_MACH_EUKREA_CPUIMX27) += eukrea_cpuimx27.o +obj-$(CONFIG_MACH_EUKREA_MBIMX27_BASEBOARD) += eukrea_mbimx27-baseboard.o diff --git a/arch/arm/mach-mx2/eukrea_mbimx27-baseboard.c b/arch/arm/mach-mx2/eukrea_mbimx27-baseboard.c new file mode 100644 index 00000000000..7382b6d27ee --- /dev/null +++ b/arch/arm/mach-mx2/eukrea_mbimx27-baseboard.c @@ -0,0 +1,249 @@ +/* + * Copyright (C) 2009 Eric Benard - eric@eukrea.com + * + * Based on pcm970-baseboard.c which is : + * Copyright (C) 2008 Juergen Beisert (kernel@pengutronix.de) + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version 2 + * of the License, or (at your option) any later version. + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, + * MA 02110-1301, USA. + */ + +#include +#include +#include +#include +#include + +#include + +#include +#include +#include +#include +#include +#include + +#include "devices.h" + +static int eukrea_mbimx27_pins[] = { + /* UART2 */ + PE3_PF_UART2_CTS, + PE4_PF_UART2_RTS, + PE6_PF_UART2_TXD, + PE7_PF_UART2_RXD, + /* UART3 */ + PE8_PF_UART3_TXD, + PE9_PF_UART3_RXD, + PE10_PF_UART3_CTS, + PE11_PF_UART3_RTS, + /* UART4 */ + PB26_AF_UART4_RTS, + PB28_AF_UART4_TXD, + PB29_AF_UART4_CTS, + PB31_AF_UART4_RXD, + /* SDHC1*/ + PE18_PF_SD1_D0, + PE19_PF_SD1_D1, + PE20_PF_SD1_D2, + PE21_PF_SD1_D3, + PE22_PF_SD1_CMD, + PE23_PF_SD1_CLK, + /* display */ + PA5_PF_LSCLK, + PA6_PF_LD0, + PA7_PF_LD1, + PA8_PF_LD2, + PA9_PF_LD3, + PA10_PF_LD4, + PA11_PF_LD5, + PA12_PF_LD6, + PA13_PF_LD7, + PA14_PF_LD8, + PA15_PF_LD9, + PA16_PF_LD10, + PA17_PF_LD11, + PA18_PF_LD12, + PA19_PF_LD13, + PA20_PF_LD14, + PA21_PF_LD15, + PA22_PF_LD16, + PA23_PF_LD17, + PA28_PF_HSYNC, + PA29_PF_VSYNC, + PA30_PF_CONTRAST, + PA31_PF_OE_ACD, + /* SPI1 */ + PD28_PF_CSPI1_SS0, + PD29_PF_CSPI1_SCLK, + PD30_PF_CSPI1_MISO, + PD31_PF_CSPI1_MOSI, +}; + +static struct gpio_led gpio_leds[] = { + { + .name = "led1", + .default_trigger = "heartbeat", + .active_low = 1, + .gpio = GPIO_PORTF | 16, + }, + { + .name = "led2", + .default_trigger = "none", + .active_low = 1, + .gpio = GPIO_PORTF | 19, + }, + { + .name = "backlight", + .default_trigger = "backlight", + .active_low = 0, + .gpio = GPIO_PORTE | 5, + }, +}; + +static struct gpio_led_platform_data gpio_led_info = { + .leds = gpio_leds, + .num_leds = ARRAY_SIZE(gpio_leds), +}; + +static struct platform_device leds_gpio = { + .name = "leds-gpio", + .id = -1, + .dev = { + .platform_data = &gpio_led_info, + }, +}; + +static struct imx_fb_videomode eukrea_mbimx27_modes[] = { + { + .mode = { + .name = "CMO-QGVA", + .refresh = 60, + .xres = 320, + .yres = 240, + .pixclock = 156000, + .hsync_len = 30, + .left_margin = 38, + .right_margin = 20, + .vsync_len = 3, + .upper_margin = 15, + .lower_margin = 4, + }, + .pcr = 0xFAD08B80, + .bpp = 16, + }, +}; + +static struct imx_fb_platform_data eukrea_mbimx27_fb_data = { + .mode = eukrea_mbimx27_modes, + .num_modes = ARRAY_SIZE(eukrea_mbimx27_modes), + + .pwmr = 0x00A903FF, + .lscr1 = 0x00120300, + .dmacr = 0x00040060, +}; + +static struct imxuart_platform_data uart_pdata[] = { + { + .flags = IMXUART_HAVE_RTSCTS, + }, + { + .flags = IMXUART_HAVE_RTSCTS, + }, +}; + +#if defined(CONFIG_TOUCHSCREEN_ADS7846) + || defined(CONFIG_TOUCHSCREEN_ADS7846_MODULE) + +#define ADS7846_PENDOWN (GPIO_PORTD | 25) + +static void ads7846_dev_init(void) +{ + if (gpio_request(ADS7846_PENDOWN, "ADS7846 pendown") < 0) { + printk(KERN_ERR "can't get ads746 pen down GPIO\n"); + return; + } + + gpio_direction_input(ADS7846_PENDOWN); +} + +static int ads7846_get_pendown_state(void) +{ + return !gpio_get_value(ADS7846_PENDOWN); +} + +static struct ads7846_platform_data ads7846_config __initdata = { + .get_pendown_state = ads7846_get_pendown_state, + .keep_vref_on = 1, +}; + +static struct spi_board_info eukrea_mbimx27_spi_board_info[] __initdata = { + [0] = { + .modalias = "ads7846", + .bus_num = 0, + .chip_select = 0, + .max_speed_hz = 1500000, + .irq = IRQ_GPIOD(25), + .platform_data = &ads7846_config, + .mode = SPI_MODE_2, + }, +}; + +static int eukrea_mbimx27_spi_cs[] = {GPIO_PORTD | 28}; + +static struct spi_imx_master eukrea_mbimx27_spi_0_data = { + .chipselect = eukrea_mbimx27_spi_cs, + .num_chipselect = ARRAY_SIZE(eukrea_mbimx27_spi_cs), +}; +#endif + +static struct platform_device *platform_devices[] __initdata = { + &leds_gpio, +}; + +/* + * system init for baseboard usage. Will be called by cpuimx27 init. + * + * Add platform devices present on this baseboard and init + * them from CPU side as far as required to use them later on + */ +void __init eukrea_mbimx27_baseboard_init(void) +{ + mxc_gpio_setup_multiple_pins(eukrea_mbimx27_pins, + ARRAY_SIZE(eukrea_mbimx27_pins), "MBIMX27"); + + mxc_register_device(&mxc_uart_device1, &uart_pdata[0]); + mxc_register_device(&mxc_uart_device2, &uart_pdata[1]); + + mxc_register_device(&mxc_fb_device, &eukrea_mbimx27_fb_data); + mxc_register_device(&mxc_sdhc_device0, NULL); + +#if defined(CONFIG_TOUCHSCREEN_ADS7846) + || defined(CONFIG_TOUCHSCREEN_ADS7846_MODULE) + /* SPI and ADS7846 Touchscreen controler init */ + mxc_gpio_mode(GPIO_PORTD | 28 | GPIO_GPIO | GPIO_OUT); + mxc_gpio_mode(GPIO_PORTD | 25 | GPIO_GPIO | GPIO_IN); + mxc_register_device(&mxc_spi_device0, &eukrea_mbimx27_spi_0_data); + spi_register_board_info(eukrea_mbimx27_spi_board_info, + ARRAY_SIZE(eukrea_mbimx27_spi_board_info)); + ads7846_dev_init(); +#endif + + /* Leds configuration */ + mxc_gpio_mode(GPIO_PORTF | 16 | GPIO_GPIO | GPIO_OUT); + mxc_gpio_mode(GPIO_PORTF | 19 | GPIO_GPIO | GPIO_OUT); + /* Backlight */ + mxc_gpio_mode(GPIO_PORTE | 5 | GPIO_GPIO | GPIO_OUT); + + platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices)); +} diff --git a/arch/arm/plat-mxc/include/mach/board-eukrea_cpuimx27.h b/arch/arm/plat-mxc/include/mach/board-eukrea_cpuimx27.h index 91bcce65469..a1fd5830af4 100644 --- a/arch/arm/plat-mxc/include/mach/board-eukrea_cpuimx27.h +++ b/arch/arm/plat-mxc/include/mach/board-eukrea_cpuimx27.h @@ -22,4 +22,19 @@ #ifndef __ASM_ARCH_MXC_BOARD_EUKREA_CPUIMX27_H__ #define __ASM_ARCH_MXC_BOARD_EUKREA_CPUIMX27_H__ +#ifndef __ASSEMBLY__ +/* + * This CPU module needs a baseboard to work. After basic initializing + * its own devices, it calls baseboard's init function. + * TODO: Add your own baseboard init function and call it from + * inside eukrea_cpuimx27_init(). + * + * This example here is for the development board. Refer + * eukrea_mbimx27-baseboard.c + */ + +extern void eukrea_mbimx27_baseboard_init(void); + +#endif + #endif /* __ASM_ARCH_MXC_BOARD_EUKREA_CPUIMX27_H__ */ -- cgit v1.2.3 From 8f2208601f81b505710b0d13dbd80b687ccbca60 Mon Sep 17 00:00:00 2001 From: Simon Guinot Date: Mon, 22 Jun 2009 21:45:01 +0200 Subject: [ARM] orion5x: Add LaCie NAS d2Network support This patch add support for the d2 Network and the Big Disk Network LaCie boards. Signed-off-by: Simon Guinot Acked-by: Christopher Moore Signed-off-by: Nicolas Pitre --- arch/arm/mach-orion5x/Kconfig | 14 ++ arch/arm/mach-orion5x/Makefile | 2 + arch/arm/mach-orion5x/d2net-setup.c | 365 ++++++++++++++++++++++++++++++++++++ 3 files changed, 381 insertions(+) create mode 100644 arch/arm/mach-orion5x/d2net-setup.c diff --git a/arch/arm/mach-orion5x/Kconfig b/arch/arm/mach-orion5x/Kconfig index 2c7035d8dcb..5062b05b76b 100644 --- a/arch/arm/mach-orion5x/Kconfig +++ b/arch/arm/mach-orion5x/Kconfig @@ -89,6 +89,20 @@ config MACH_EDMINI_V2 Say 'Y' here if you want your kernel to support the LaCie Ethernet Disk mini V2. +config MACH_D2NET + bool "LaCie d2 Network" + select I2C_BOARDINFO + help + Say 'Y' here if you want your kernel to support the + LaCie d2 Network NAS. + +config MACH_BIGDISK + bool "LaCie Big Disk Network" + select I2C_BOARDINFO + help + Say 'Y' here if you want your kernel to support the + LaCie Big Disk Network NAS. + config MACH_MSS2 bool "Maxtor Shared Storage II" help diff --git a/arch/arm/mach-orion5x/Makefile b/arch/arm/mach-orion5x/Makefile index edc38e2c856..1db8a3a2708 100644 --- a/arch/arm/mach-orion5x/Makefile +++ b/arch/arm/mach-orion5x/Makefile @@ -12,6 +12,8 @@ obj-$(CONFIG_MACH_WRT350N_V2) += wrt350n-v2-setup.o obj-$(CONFIG_MACH_TS78XX) += ts78xx-setup.o obj-$(CONFIG_MACH_MV2120) += mv2120-setup.o obj-$(CONFIG_MACH_EDMINI_V2) += edmini_v2-setup.o +obj-$(CONFIG_MACH_D2NET) += d2net-setup.o +obj-$(CONFIG_MACH_BIGDISK) += d2net-setup.o obj-$(CONFIG_MACH_MSS2) += mss2-setup.o obj-$(CONFIG_MACH_WNR854T) += wnr854t-setup.o obj-$(CONFIG_MACH_RD88F5181L_GE) += rd88f5181l-ge-setup.o diff --git a/arch/arm/mach-orion5x/d2net-setup.c b/arch/arm/mach-orion5x/d2net-setup.c new file mode 100644 index 00000000000..9d4bf763f25 --- /dev/null +++ b/arch/arm/mach-orion5x/d2net-setup.c @@ -0,0 +1,365 @@ +/* + * arch/arm/mach-orion5x/d2net-setup.c + * + * LaCie d2Network and Big Disk Network NAS setup + * + * Copyright (C) 2009 Simon Guinot + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include "common.h" +#include "mpp.h" + +/***************************************************************************** + * LaCie d2 Network Info + ****************************************************************************/ + +/* + * 512KB NOR flash Device bus boot chip select + */ + +#define D2NET_NOR_BOOT_BASE 0xfff80000 +#define D2NET_NOR_BOOT_SIZE SZ_512K + +/***************************************************************************** + * 512KB NOR Flash on Boot Device + ****************************************************************************/ + +/* + * TODO: Check write support on flash MX29LV400CBTC-70G + */ + +static struct mtd_partition d2net_partitions[] = { + { + .name = "Full512kb", + .size = MTDPART_SIZ_FULL, + .offset = 0, + .mask_flags = MTD_WRITEABLE, + }, +}; + +static struct physmap_flash_data d2net_nor_flash_data = { + .width = 1, + .parts = d2net_partitions, + .nr_parts = ARRAY_SIZE(d2net_partitions), +}; + +static struct resource d2net_nor_flash_resource = { + .flags = IORESOURCE_MEM, + .start = D2NET_NOR_BOOT_BASE, + .end = D2NET_NOR_BOOT_BASE + + D2NET_NOR_BOOT_SIZE - 1, +}; + +static struct platform_device d2net_nor_flash = { + .name = "physmap-flash", + .id = 0, + .dev = { + .platform_data = &d2net_nor_flash_data, + }, + .num_resources = 1, + .resource = &d2net_nor_flash_resource, +}; + +/***************************************************************************** + * Ethernet + ****************************************************************************/ + +static struct mv643xx_eth_platform_data d2net_eth_data = { + .phy_addr = MV643XX_ETH_PHY_ADDR(8), +}; + +/***************************************************************************** + * I2C devices + ****************************************************************************/ + +/* + * i2c addr | chip | description + * 0x32 | Ricoh 5C372b | RTC + * 0x3e | GMT G762 | PWM fan controller + * 0x50 | HT24LC08 | eeprom (1kB) + * + * TODO: Add G762 support to the g760a driver. + */ +static struct i2c_board_info __initdata d2net_i2c_devices[] = { + { + I2C_BOARD_INFO("rs5c372b", 0x32), + }, { + I2C_BOARD_INFO("24c08", 0x50), + }, +}; + +/***************************************************************************** + * SATA + ****************************************************************************/ + +static struct mv_sata_platform_data d2net_sata_data = { + .n_ports = 2, +}; + +#define D2NET_GPIO_SATA0_POWER 3 +#define D2NET_GPIO_SATA1_POWER 12 + +static void __init d2net_sata_power_init(void) +{ + int err; + + err = gpio_request(D2NET_GPIO_SATA0_POWER, "SATA0 power"); + if (err == 0) { + err = gpio_direction_output(D2NET_GPIO_SATA0_POWER, 1); + if (err) + gpio_free(D2NET_GPIO_SATA0_POWER); + } + if (err) + pr_err("d2net: failed to configure SATA0 power GPIO\n"); + + err = gpio_request(D2NET_GPIO_SATA1_POWER, "SATA1 power"); + if (err == 0) { + err = gpio_direction_output(D2NET_GPIO_SATA1_POWER, 1); + if (err) + gpio_free(D2NET_GPIO_SATA1_POWER); + } + if (err) + pr_err("d2net: failed to configure SATA1 power GPIO\n"); +} + +/***************************************************************************** + * GPIO LED's + ****************************************************************************/ + +/* + * The blue front LED is wired to the CPLD and can blink in relation with the + * SATA activity. This feature is disabled to make this LED compatible with + * the leds-gpio driver: MPP14 and MPP15 are configured to act like output + * GPIO's and have to stay in an active state. This is needed to set the blue + * LED in a "fix on" state regardless of the SATA activity. + * + * The following array detail the different LED registers and the combination + * of their possible values: + * + * led_off | blink_ctrl | SATA active | LED state + * | | | + * 1 | x | x | off + * 0 | 0 | 0 | off + * 0 | 1 | 0 | blink (rate 300ms) + * 0 | x | 1 | on + * + * Notes: The blue and the red front LED's can't be on at the same time. + * Red LED have priority. + */ + +#define D2NET_GPIO_RED_LED 6 +#define D2NET_GPIO_BLUE_LED_BLINK_CTRL 16 +#define D2NET_GPIO_BLUE_LED_OFF 23 +#define D2NET_GPIO_SATA0_ACT 14 +#define D2NET_GPIO_SATA1_ACT 15 + +static struct gpio_led d2net_leds[] = { + { + .name = "d2net:blue:power", + .gpio = D2NET_GPIO_BLUE_LED_OFF, + .active_low = 1, + }, + { + .name = "d2net:red:fail", + .gpio = D2NET_GPIO_RED_LED, + }, +}; + +static struct gpio_led_platform_data d2net_led_data = { + .num_leds = ARRAY_SIZE(d2net_leds), + .leds = d2net_leds, +}; + +static struct platform_device d2net_gpio_leds = { + .name = "leds-gpio", + .id = -1, + .dev = { + .platform_data = &d2net_led_data, + }, +}; + +static void __init d2net_gpio_leds_init(void) +{ + /* Configure GPIO over MPP max number. */ + orion_gpio_set_valid(D2NET_GPIO_BLUE_LED_OFF, 1); + + if (gpio_request(D2NET_GPIO_SATA0_ACT, "LED SATA0 activity") != 0) + return; + if (gpio_direction_output(D2NET_GPIO_SATA0_ACT, 1) != 0) + goto err_free_1; + if (gpio_request(D2NET_GPIO_SATA1_ACT, "LED SATA1 activity") != 0) + goto err_free_1; + if (gpio_direction_output(D2NET_GPIO_SATA1_ACT, 1) != 0) + goto err_free_2; + platform_device_register(&d2net_gpio_leds); + return; + +err_free_2: + gpio_free(D2NET_GPIO_SATA1_ACT); +err_free_1: + gpio_free(D2NET_GPIO_SATA0_ACT); + return; +} + +/**************************************************************************** + * GPIO keys + ****************************************************************************/ + +#define D2NET_GPIO_PUSH_BUTTON 18 +#define D2NET_GPIO_POWER_SWITCH_ON 8 +#define D2NET_GPIO_POWER_SWITCH_OFF 9 + +#define D2NET_SWITCH_POWER_ON 0x1 +#define D2NET_SWITCH_POWER_OFF 0x2 + +static struct gpio_keys_button d2net_buttons[] = { + { + .type = EV_SW, + .code = D2NET_SWITCH_POWER_OFF, + .gpio = D2NET_GPIO_POWER_SWITCH_OFF, + .desc = "Power rocker switch (auto|off)", + .active_low = 0, + }, + { + .type = EV_SW, + .code = D2NET_SWITCH_POWER_ON, + .gpio = D2NET_GPIO_POWER_SWITCH_ON, + .desc = "Power rocker switch (on|auto)", + .active_low = 0, + }, + { + .type = EV_KEY, + .code = KEY_POWER, + .gpio = D2NET_GPIO_PUSH_BUTTON, + .desc = "Front Push Button", + .active_low = 0, + }, +}; + +static struct gpio_keys_platform_data d2net_button_data = { + .buttons = d2net_buttons, + .nbuttons = ARRAY_SIZE(d2net_buttons), +}; + +static struct platform_device d2net_gpio_buttons = { + .name = "gpio-keys", + .id = -1, + .dev = { + .platform_data = &d2net_button_data, + }, +}; + +/***************************************************************************** + * General Setup + ****************************************************************************/ + +static struct orion5x_mpp_mode d2net_mpp_modes[] __initdata = { + { 0, MPP_GPIO }, /* Board ID (bit 0) */ + { 1, MPP_GPIO }, /* Board ID (bit 1) */ + { 2, MPP_GPIO }, /* Board ID (bit 2) */ + { 3, MPP_GPIO }, /* SATA 0 power */ + { 4, MPP_UNUSED }, + { 5, MPP_GPIO }, /* Fan fail detection */ + { 6, MPP_GPIO }, /* Red front LED */ + { 7, MPP_UNUSED }, + { 8, MPP_GPIO }, /* Rear power switch (on|auto) */ + { 9, MPP_GPIO }, /* Rear power switch (auto|off) */ + { 10, MPP_UNUSED }, + { 11, MPP_UNUSED }, + { 12, MPP_GPIO }, /* SATA 1 power */ + { 13, MPP_UNUSED }, + { 14, MPP_GPIO }, /* SATA 0 active */ + { 15, MPP_GPIO }, /* SATA 1 active */ + { 16, MPP_GPIO }, /* Blue front LED blink control */ + { 17, MPP_UNUSED }, + { 18, MPP_GPIO }, /* Front button (0 = Released, 1 = Pushed ) */ + { 19, MPP_UNUSED }, + { -1 } + /* 22: USB port 1 fuse (0 = Fail, 1 = Ok) */ + /* 23: Blue front LED off */ + /* 24: Inhibit board power off (0 = Disabled, 1 = Enabled) */ +}; + +static void __init d2net_init(void) +{ + /* + * Setup basic Orion functions. Need to be called early. + */ + orion5x_init(); + + orion5x_mpp_conf(d2net_mpp_modes); + + /* + * Configure peripherals. + */ + orion5x_ehci0_init(); + orion5x_eth_init(&d2net_eth_data); + orion5x_i2c_init(); + orion5x_uart0_init(); + + d2net_sata_power_init(); + orion5x_sata_init(&d2net_sata_data); + + orion5x_setup_dev_boot_win(D2NET_NOR_BOOT_BASE, + D2NET_NOR_BOOT_SIZE); + platform_device_register(&d2net_nor_flash); + + platform_device_register(&d2net_gpio_buttons); + + d2net_gpio_leds_init(); + + pr_notice("d2net: Flash write are not yet supported.\n"); + + i2c_register_board_info(0, d2net_i2c_devices, + ARRAY_SIZE(d2net_i2c_devices)); +} + +/* Warning: LaCie use a wrong mach-type (0x20e=526) in their bootloader. */ + +#ifdef CONFIG_MACH_D2NET +MACHINE_START(D2NET, "LaCie d2 Network") + .phys_io = ORION5X_REGS_PHYS_BASE, + .io_pg_offst = ((ORION5X_REGS_VIRT_BASE) >> 18) & 0xFFFC, + .boot_params = 0x00000100, + .init_machine = d2net_init, + .map_io = orion5x_map_io, + .init_irq = orion5x_init_irq, + .timer = &orion5x_timer, + .fixup = tag_fixup_mem32, +MACHINE_END +#endif + +#ifdef CONFIG_MACH_BIGDISK +MACHINE_START(BIGDISK, "LaCie Big Disk Network") + .phys_io = ORION5X_REGS_PHYS_BASE, + .io_pg_offst = ((ORION5X_REGS_VIRT_BASE) >> 18) & 0xFFFC, + .boot_params = 0x00000100, + .init_machine = d2net_init, + .map_io = orion5x_map_io, + .init_irq = orion5x_init_irq, + .timer = &orion5x_timer, + .fixup = tag_fixup_mem32, +MACHINE_END +#endif + -- cgit v1.2.3 From aec1bad326a99a8b0860fa9d518985ee388c9391 Mon Sep 17 00:00:00 2001 From: Siddarth Gore Date: Tue, 9 Jun 2009 14:41:02 +0530 Subject: [ARM] Kirkwood: Add support for 6281-A1 Signed-off-by: Siddarth Gore Signed-off-by: Nicolas Pitre --- arch/arm/mach-kirkwood/common.c | 5 ++++- arch/arm/mach-kirkwood/include/mach/kirkwood.h | 1 + 2 files changed, 5 insertions(+), 1 deletion(-) diff --git a/arch/arm/mach-kirkwood/common.c b/arch/arm/mach-kirkwood/common.c index 0f691983801..0acb61f3c10 100644 --- a/arch/arm/mach-kirkwood/common.c +++ b/arch/arm/mach-kirkwood/common.c @@ -838,7 +838,8 @@ int __init kirkwood_find_tclk(void) u32 dev, rev; kirkwood_pcie_id(&dev, &rev); - if (dev == MV88F6281_DEV_ID && rev == MV88F6281_REV_A0) + if (dev == MV88F6281_DEV_ID && (rev == MV88F6281_REV_A0 || + rev == MV88F6281_REV_A1)) return 200000000; return 166666667; @@ -872,6 +873,8 @@ static char * __init kirkwood_id(void) return "MV88F6281-Z0"; else if (rev == MV88F6281_REV_A0) return "MV88F6281-A0"; + else if (rev == MV88F6281_REV_A1) + return "MV88F6281-A1"; else return "MV88F6281-Rev-Unsupported"; } else if (dev == MV88F6192_DEV_ID) { diff --git a/arch/arm/mach-kirkwood/include/mach/kirkwood.h b/arch/arm/mach-kirkwood/include/mach/kirkwood.h index 07af858814a..54c132731d2 100644 --- a/arch/arm/mach-kirkwood/include/mach/kirkwood.h +++ b/arch/arm/mach-kirkwood/include/mach/kirkwood.h @@ -101,6 +101,7 @@ #define MV88F6281_DEV_ID 0x6281 #define MV88F6281_REV_Z0 0 #define MV88F6281_REV_A0 2 +#define MV88F6281_REV_A1 3 #define MV88F6192_DEV_ID 0x6192 #define MV88F6192_REV_Z0 0 -- cgit v1.2.3 From 7153c360ebe5bcfb1e6b7980b90584c75c8c8e4d Mon Sep 17 00:00:00 2001 From: Lennert Buytenhek Date: Mon, 3 Aug 2009 16:25:12 +0200 Subject: =?UTF-8?q?=C2=B6ARM]=20Orion5x:=20fix=20cpu=20window=20mapping=20?= =?UTF-8?q?for=2088f6183?= MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit On the 88f6183, orion5x's setup_cpu_win() fails to ever program any mbus bridge remap registers, which causes transactions for PCI/PCIe IO/MEM space to get sent to random mbus targets. Adding a check for the 6183 in orion5x_cpu_win_can_remap() is necessary and sufficient to make PCIe wlan cards work on the 6183 reference design. Signed-off-by: Lennert Buytenhek Signed-off-by: Nicolas Pitre --- arch/arm/mach-orion5x/addr-map.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/arch/arm/mach-orion5x/addr-map.c b/arch/arm/mach-orion5x/addr-map.c index d78731edebb..1a5d6a0e260 100644 --- a/arch/arm/mach-orion5x/addr-map.c +++ b/arch/arm/mach-orion5x/addr-map.c @@ -84,7 +84,8 @@ static int __init orion5x_cpu_win_can_remap(int win) orion5x_pcie_id(&dev, &rev); if ((dev == MV88F5281_DEV_ID && win < 4) || (dev == MV88F5182_DEV_ID && win < 2) - || (dev == MV88F5181_DEV_ID && win < 2)) + || (dev == MV88F5181_DEV_ID && win < 2) + || (dev == MV88F6183_DEV_ID && win < 4)) return 1; return 0; -- cgit v1.2.3 From 7eeae54c68e91c46ec170e764d1cceac81f35969 Mon Sep 17 00:00:00 2001 From: Dhaval Vasa Date: Mon, 10 Aug 2009 17:37:34 +0530 Subject: [ARM] Kirkwood: Marvell OpenRD-Base board support reference: http://open-rd.org http://code.google.com/p/openrd This patch is tested for: 1. Boot from DRAM/NAND flash 2. NAND read/write/erase 3. GbE0 4. USB read/write FIXME: 1. SD/UART1 selection 2. MPP configuration (currently, default) 3. PEX Signed-off-by: Dhaval Vasa Signed-off-by: Nicolas Pitre --- arch/arm/mach-kirkwood/Kconfig | 6 +++ arch/arm/mach-kirkwood/Makefile | 1 + arch/arm/mach-kirkwood/openrd_base-setup.c | 78 ++++++++++++++++++++++++++++++ 3 files changed, 85 insertions(+) create mode 100644 arch/arm/mach-kirkwood/openrd_base-setup.c diff --git a/arch/arm/mach-kirkwood/Kconfig b/arch/arm/mach-kirkwood/Kconfig index 25100f7acf4..0aca451b216 100644 --- a/arch/arm/mach-kirkwood/Kconfig +++ b/arch/arm/mach-kirkwood/Kconfig @@ -38,6 +38,12 @@ config MACH_TS219 Say 'Y' here if you want your kernel to support the QNAP TS-119 and TS-219 Turbo NAS devices. +config MACH_OPENRD_BASE + bool "Marvell OpenRD Base Board" + help + Say 'Y' here if you want your kernel to support the + Marvell OpenRD Base Board. + endmenu endif diff --git a/arch/arm/mach-kirkwood/Makefile b/arch/arm/mach-kirkwood/Makefile index 9dd680e964d..80ab0ec90ee 100644 --- a/arch/arm/mach-kirkwood/Makefile +++ b/arch/arm/mach-kirkwood/Makefile @@ -6,5 +6,6 @@ obj-$(CONFIG_MACH_RD88F6281) += rd88f6281-setup.o obj-$(CONFIG_MACH_MV88F6281GTW_GE) += mv88f6281gtw_ge-setup.o obj-$(CONFIG_MACH_SHEEVAPLUG) += sheevaplug-setup.o obj-$(CONFIG_MACH_TS219) += ts219-setup.o +obj-$(CONFIG_MACH_OPENRD_BASE) += openrd_base-setup.o obj-$(CONFIG_CPU_IDLE) += cpuidle.o diff --git a/arch/arm/mach-kirkwood/openrd_base-setup.c b/arch/arm/mach-kirkwood/openrd_base-setup.c new file mode 100644 index 00000000000..3144bb87578 --- /dev/null +++ b/arch/arm/mach-kirkwood/openrd_base-setup.c @@ -0,0 +1,78 @@ +/* + * arch/arm/mach-kirkwood/openrd_base-setup.c + * + * Marvell OpenRD Base Board Setup + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include "common.h" +#include "mpp.h" + +static struct mtd_partition openrd_base_nand_parts[] = { + { + .name = "u-boot", + .offset = 0, + .size = SZ_1M + }, { + .name = "uImage", + .offset = MTDPART_OFS_NXTBLK, + .size = SZ_4M + }, { + .name = "root", + .offset = MTDPART_OFS_NXTBLK, + .size = MTDPART_SIZ_FULL + }, +}; + +static struct mv643xx_eth_platform_data openrd_base_ge00_data = { + .phy_addr = MV643XX_ETH_PHY_ADDR(8), +}; + +static struct mvsdio_platform_data openrd_base_mvsdio_data = { + .gpio_card_detect = 29, /* MPP29 used as SD card detect */ +}; + +static unsigned int openrd_base_mpp_config[] __initdata = { + MPP29_GPIO, + 0 +}; + +static void __init openrd_base_init(void) +{ + /* + * Basic setup. Needs to be called early. + */ + kirkwood_init(); + kirkwood_mpp_conf(openrd_base_mpp_config); + + kirkwood_uart0_init(); + kirkwood_nand_init(ARRAY_AND_SIZE(openrd_base_nand_parts), 25); + + kirkwood_ehci_init(); + + kirkwood_ge00_init(&openrd_base_ge00_data); + kirkwood_sdio_init(&openrd_base_mvsdio_data); +} + +MACHINE_START(OPENRD_BASE, "Marvell OpenRD Base Board") + /* Maintainer: Dhaval Vasa */ + .phys_io = KIRKWOOD_REGS_PHYS_BASE, + .io_pg_offst = ((KIRKWOOD_REGS_VIRT_BASE) >> 18) & 0xfffc, + .boot_params = 0x00000100, + .init_machine = openrd_base_init, + .map_io = kirkwood_map_io, + .init_irq = kirkwood_init_irq, + .timer = &kirkwood_timer, +MACHINE_END -- cgit v1.2.3 From decf77079511fc5ef832ead074bb45e4e0b099c0 Mon Sep 17 00:00:00 2001 From: Ron Lee Date: Mon, 10 Aug 2009 18:23:48 +0530 Subject: [ARM] Kirkwood: Initialise SATA for OpenRD-Base Signed-off-by: Ron Lee Signed-off-by: Dhaval Vasa Signed-off-by: Nicolas Pitre --- arch/arm/mach-kirkwood/openrd_base-setup.c | 6 ++++++ 1 file changed, 6 insertions(+) diff --git a/arch/arm/mach-kirkwood/openrd_base-setup.c b/arch/arm/mach-kirkwood/openrd_base-setup.c index 3144bb87578..947dfb8cd5b 100644 --- a/arch/arm/mach-kirkwood/openrd_base-setup.c +++ b/arch/arm/mach-kirkwood/openrd_base-setup.c @@ -12,6 +12,7 @@ #include #include #include +#include #include #include #include @@ -40,6 +41,10 @@ static struct mv643xx_eth_platform_data openrd_base_ge00_data = { .phy_addr = MV643XX_ETH_PHY_ADDR(8), }; +static struct mv_sata_platform_data openrd_base_sata_data = { + .n_ports = 2, +}; + static struct mvsdio_platform_data openrd_base_mvsdio_data = { .gpio_card_detect = 29, /* MPP29 used as SD card detect */ }; @@ -63,6 +68,7 @@ static void __init openrd_base_init(void) kirkwood_ehci_init(); kirkwood_ge00_init(&openrd_base_ge00_data); + kirkwood_sata_init(&openrd_base_sata_data); kirkwood_sdio_init(&openrd_base_mvsdio_data); } -- cgit v1.2.3 From 54a246ff21b543bf3d8d5d064708dc7782403e32 Mon Sep 17 00:00:00 2001 From: Nicolas Pitre Date: Tue, 11 Aug 2009 23:28:51 -0400 Subject: [ARM] add MAINTAINERS entry for Orion/Kirkwood/etc. Signed-off-by: Nicolas Pitre --- MAINTAINERS | 12 ++++++++++++ 1 file changed, 12 insertions(+) diff --git a/MAINTAINERS b/MAINTAINERS index d6befb2c470..33d0ec494e3 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -685,6 +685,18 @@ ARM/MAGICIAN MACHINE SUPPORT M: Philipp Zabel S: Maintained +ARM/Marvell Loki/Kirkwood/MV78xx0/Orion SOC support +M: Lennert Buytenhek +M: Nicolas Pitre +L: linux-arm-kernel@lists.arm.linux.org.uk (subscribers-only) +T: git git://git.marvell.com/orion +S: Maintained +F: arch/arm/mach-loki/ +F: arch/arm/mach-kirkwood/ +F: arch/arm/mach-mv78xx0/ +F: arch/arm/mach-orion5x/ +F: arch/arm/plat-orion/ + ARM/MIOA701 MACHINE SUPPORT M: Robert Jarzmik L: linux-arm-kernel@lists.arm.linux.org.uk (subscribers-only) -- cgit v1.2.3 From b88fb83b138d4a377abea9461b2d58b9bf8ad9fe Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Uwe=20Kleine-K=C3=B6nig?= Date: Thu, 13 Aug 2009 20:38:16 +0200 Subject: netx: Use get_irqnr_preamble to initialize base register MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit This patch optimizes the irq handling a bit. Now the base register is only computed once per irq exception instead of at least twice. Moreover the mov+add sequence is simplified to an ldr (which might save some cycles depending on memory timing). Signed-off-by: Uwe Kleine-König --- arch/arm/mach-netx/include/mach/entry-macro.S | 4 +--- 1 file changed, 1 insertion(+), 3 deletions(-) diff --git a/arch/arm/mach-netx/include/mach/entry-macro.S b/arch/arm/mach-netx/include/mach/entry-macro.S index a1952a0feda..844f1f9acbd 100644 --- a/arch/arm/mach-netx/include/mach/entry-macro.S +++ b/arch/arm/mach-netx/include/mach/entry-macro.S @@ -24,15 +24,13 @@ .endm .macro get_irqnr_preamble, base, tmp + ldr \base, =io_p2v(0x001ff000) .endm .macro arch_ret_to_user, tmp1, tmp2 .endm .macro get_irqnr_and_base, irqnr, irqstat, base, tmp - mov \base, #io_p2v(0x00100000) - add \base, \base, #0x000ff000 - ldr \irqstat, [\base, #0] clz \irqnr, \irqstat rsb \irqnr, \irqnr, #31 -- cgit v1.2.3 From 181f817eaaca4c1f8a9c265d339d2b96de8b245d Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Uwe=20Kleine-K=C3=B6nig?= Date: Thu, 13 Aug 2009 20:38:16 +0200 Subject: [ARM] support tracing when using newer compilers MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Since gcc 4.4 the name and calling convention for function profiling on ARM changed. With this patch both types are supported. See http://sourceware.org/ml/libc-ports/2008-04/msg00009.html for some details. Lightly-Tested-by: Anand Gadiyar Tested-by: Kevin Hilman Signed-off-by: Uwe Kleine-König --- arch/arm/include/asm/ftrace.h | 1 + arch/arm/kernel/armksyms.c | 1 + arch/arm/kernel/entry-common.S | 19 +++++++++++++++++++ 3 files changed, 21 insertions(+) diff --git a/arch/arm/include/asm/ftrace.h b/arch/arm/include/asm/ftrace.h index 39c8bc1a006..0d4c478e01b 100644 --- a/arch/arm/include/asm/ftrace.h +++ b/arch/arm/include/asm/ftrace.h @@ -7,6 +7,7 @@ #ifndef __ASSEMBLY__ extern void mcount(void); +extern void __gnu_mcount_nc(void); #endif #endif diff --git a/arch/arm/kernel/armksyms.c b/arch/arm/kernel/armksyms.c index 531e1860e54..0e627705f74 100644 --- a/arch/arm/kernel/armksyms.c +++ b/arch/arm/kernel/armksyms.c @@ -186,4 +186,5 @@ EXPORT_SYMBOL(_find_next_bit_be); #ifdef CONFIG_FUNCTION_TRACER EXPORT_SYMBOL(mcount); +EXPORT_SYMBOL(__gnu_mcount_nc); #endif diff --git a/arch/arm/kernel/entry-common.S b/arch/arm/kernel/entry-common.S index 366e5097a41..99208728d48 100644 --- a/arch/arm/kernel/entry-common.S +++ b/arch/arm/kernel/entry-common.S @@ -132,6 +132,25 @@ ftrace_call: #else +ENTRY(__gnu_mcount_nc) + stmdb sp!, {r0-r3, lr} + ldr r0, =ftrace_trace_function + ldr r2, [r0] + adr r0, ftrace_stub + cmp r0, r2 + bne gnu_trace + ldmia sp!, {r0-r3, ip, lr} + bx ip + +gnu_trace: + ldr r1, [sp, #20] @ lr of instrumented routine + mov r0, lr + sub r0, r0, #MCOUNT_INSN_SIZE + mov lr, pc + mov pc, r2 + ldmia sp!, {r0-r3, ip, lr} + bx ip + ENTRY(mcount) stmdb sp!, {r0-r3, lr} ldr r0, =ftrace_trace_function -- cgit v1.2.3 From 0d928b0b616d1c5c5fe76019a87cba171ca91633 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Uwe=20Kleine-K=C3=B6nig?= Date: Thu, 13 Aug 2009 20:38:17 +0200 Subject: Complete irq tracing support for ARM MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Before this patch enabling and disabling irqs in assembler code and by the hardware wasn't tracked completly. I had to transpose two instructions in arch/arm/lib/bitops.h because restore_irqs doesn't preserve the flags with CONFIG_TRACE_IRQFLAGS=y Signed-off-by: Uwe Kleine-König Cc: Russell King Cc: Peter Zijlstra Cc: Ingo Molnar Signed-off-by: Uwe Kleine-König --- arch/arm/include/asm/assembler.h | 49 ++++++++++++++++++++++++++++++++++++---- arch/arm/kernel/entry-armv.S | 10 ++++---- arch/arm/lib/bitops.h | 2 +- 3 files changed, 49 insertions(+), 12 deletions(-) diff --git a/arch/arm/include/asm/assembler.h b/arch/arm/include/asm/assembler.h index 15f8a092b70..44912cd5da1 100644 --- a/arch/arm/include/asm/assembler.h +++ b/arch/arm/include/asm/assembler.h @@ -74,23 +74,56 @@ * Enable and disable interrupts */ #if __LINUX_ARM_ARCH__ >= 6 - .macro disable_irq + .macro disable_irq_notrace cpsid i .endm - .macro enable_irq + .macro enable_irq_notrace cpsie i .endm #else - .macro disable_irq + .macro disable_irq_notrace msr cpsr_c, #PSR_I_BIT | SVC_MODE .endm - .macro enable_irq + .macro enable_irq_notrace msr cpsr_c, #SVC_MODE .endm #endif + .macro asm_trace_hardirqs_off +#if defined(CONFIG_TRACE_IRQFLAGS) + stmdb sp!, {r0-r3, ip, lr} + bl trace_hardirqs_off + ldmia sp!, {r0-r3, ip, lr} +#endif + .endm + + .macro asm_trace_hardirqs_on_cond, cond +#if defined(CONFIG_TRACE_IRQFLAGS) + /* + * actually the registers should be pushed and pop'd conditionally, but + * after bl the flags are certainly clobbered + */ + stmdb sp!, {r0-r3, ip, lr} + bl\cond trace_hardirqs_on + ldmia sp!, {r0-r3, ip, lr} +#endif + .endm + + .macro asm_trace_hardirqs_on + asm_trace_hardirqs_on_cond al + .endm + + .macro disable_irq + disable_irq_notrace + asm_trace_hardirqs_off + .endm + + .macro enable_irq + asm_trace_hardirqs_on + enable_irq_notrace + .endm /* * Save the current IRQ state and disable IRQs. Note that this macro * assumes FIQs are enabled, and that the processor is in SVC mode. @@ -104,10 +137,16 @@ * Restore interrupt state previously stored in a register. We don't * guarantee that this will preserve the flags. */ - .macro restore_irqs, oldcpsr + .macro restore_irqs_notrace, oldcpsr msr cpsr_c, \oldcpsr .endm + .macro restore_irqs, oldcpsr + tst \oldcpsr, #PSR_I_BIT + asm_trace_hardirqs_on_cond eq + restore_irqs_notrace \oldcpsr + .endm + #define USER(x...) \ 9999: x; \ .section __ex_table,"a"; \ diff --git a/arch/arm/kernel/entry-armv.S b/arch/arm/kernel/entry-armv.S index fc8af43c500..792abd0dfae 100644 --- a/arch/arm/kernel/entry-armv.S +++ b/arch/arm/kernel/entry-armv.S @@ -151,6 +151,8 @@ ENDPROC(__und_invalid) @ r4 - orig_r0 (see pt_regs definition in ptrace.h) @ stmia r5, {r0 - r4} + + asm_trace_hardirqs_off .endm .align 5 @@ -206,9 +208,6 @@ ENDPROC(__dabt_svc) __irq_svc: svc_entry -#ifdef CONFIG_TRACE_IRQFLAGS - bl trace_hardirqs_off -#endif #ifdef CONFIG_PREEMPT get_thread_info tsk ldr r8, [tsk, #TI_PREEMPT] @ get preempt count @@ -383,6 +382,8 @@ ENDPROC(__pabt_svc) @ Clear FP to mark the first stack frame @ zero_fp + + asm_trace_hardirqs_off .endm .macro kuser_cmpxchg_check @@ -437,9 +438,6 @@ __irq_usr: usr_entry kuser_cmpxchg_check -#ifdef CONFIG_TRACE_IRQFLAGS - bl trace_hardirqs_off -#endif get_thread_info tsk #ifdef CONFIG_PREEMPT ldr r8, [tsk, #TI_PREEMPT] @ get preempt count diff --git a/arch/arm/lib/bitops.h b/arch/arm/lib/bitops.h index c7f2627385e..d42252918bf 100644 --- a/arch/arm/lib/bitops.h +++ b/arch/arm/lib/bitops.h @@ -60,8 +60,8 @@ tst r2, r0, lsl r3 \instr r2, r2, r0, lsl r3 \store r2, [r1] - restore_irqs ip moveq r0, #0 + restore_irqs ip mov pc, lr .endm #endif -- cgit v1.2.3 From d45a398fca6b03f16d01c9253c3a8c96d804f532 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Uwe=20Kleine-K=C3=B6nig?= Date: Thu, 13 Aug 2009 20:38:17 +0200 Subject: Use kernel/Kconfig.preempt for ARM MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit before this patch ARM had it's own definition of CONFIG_PREEMPT. Instead of that use the general definition provided in kernel/Kconfig.preempt. This patch changes the available options in *config. Namely PREEMPT isn't a stand alone bool anymore, but part of a 'choice' the following Kconfig symbols are added: PREEMPT_NONE PREEMPT_VOLUNTARY Selecting PREEMPT_NONE now produces exactly the code as not selecting PREEMPT before (apart from a comment in /sys/kernel/debug/tracing/(per_cpu/cpuX/)?trace). The only difference PREEMPT_VOLUNTARY does is that might_resched might reschedule. Both should't introduce regressions. Signed-off-by: Uwe Kleine-König Cc: Russell King --- arch/arm/Kconfig | 13 +------------ 1 file changed, 1 insertion(+), 12 deletions(-) diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index aef63c8e3d2..eac1a927ca6 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -962,18 +962,7 @@ config LOCAL_TIMERS accounting to be spread across the timer interval, preventing a "thundering herd" at every timer tick. -config PREEMPT - bool "Preemptible Kernel (EXPERIMENTAL)" - depends on EXPERIMENTAL - help - This option reduces the latency of the kernel when reacting to - real-time or interactive events by allowing a low priority process to - be preempted even if it is in kernel mode executing a system call. - This allows applications to run more reliably even when the system is - under load. - - Say Y here if you are building a kernel for a desktop, embedded - or real-time system. Say N if you are unsure. +source kernel/Kconfig.preempt config HZ int -- cgit v1.2.3 From ac25150f2c55ea26447af0fa1d4e2bb07f97384d Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Uwe=20Kleine-K=C3=B6nig?= Date: Thu, 13 Aug 2009 21:09:21 +0200 Subject: [ARM] let arch/arm/Kconfig source drivers/Kconfig MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit The changes introduced by this change are: - drivers/mtd/Kconfig doesn't depend on ALIGNMENT_TRAP || !CPU_CP15_MMU any more - the following files are sourced additionally: + drivers/macintosh/Kconfig completely depends on PPC || MAC || X86 + drivers/telephony/Kconfig new + drivers/pps/Kconfig new + drivers/infiniband/Kconfig new + drivers/edac/Kconfig depends on X86 || PPC + drivers/vlynq/Kconfig depends on AR7 && EXPERIMENTAL (that is ARCH_MIPS) + drivers/xen/Kconfig everything depends on XEN + drivers/platform/Kconfig depends on X86 - drivers/regulator/Kconfig is sourced later as is drivers/accessibility/Kconfig Signed-off-by: Uwe Kleine-König --- arch/arm/Kconfig | 102 +------------------------------------------------------ 1 file changed, 1 insertion(+), 101 deletions(-) diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index eac1a927ca6..a7eb44a1955 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -1366,107 +1366,7 @@ endmenu source "net/Kconfig" -menu "Device Drivers" - -source "drivers/base/Kconfig" - -source "drivers/connector/Kconfig" - -if ALIGNMENT_TRAP || !CPU_CP15_MMU -source "drivers/mtd/Kconfig" -endif - -source "drivers/parport/Kconfig" - -source "drivers/pnp/Kconfig" - -source "drivers/block/Kconfig" - -# misc before ide - BLK_DEV_SGIIOC4 depends on SGI_IOC4 - -source "drivers/misc/Kconfig" - -source "drivers/ide/Kconfig" - -source "drivers/scsi/Kconfig" - -source "drivers/ata/Kconfig" - -source "drivers/md/Kconfig" - -source "drivers/message/fusion/Kconfig" - -source "drivers/ieee1394/Kconfig" - -source "drivers/message/i2o/Kconfig" - -source "drivers/net/Kconfig" - -source "drivers/isdn/Kconfig" - -# input before char - char/joystick depends on it. As does USB. - -source "drivers/input/Kconfig" - -source "drivers/char/Kconfig" - -source "drivers/i2c/Kconfig" - -source "drivers/spi/Kconfig" - -source "drivers/gpio/Kconfig" - -source "drivers/w1/Kconfig" - -source "drivers/power/Kconfig" - -source "drivers/hwmon/Kconfig" - -source "drivers/thermal/Kconfig" - -source "drivers/watchdog/Kconfig" - -source "drivers/ssb/Kconfig" - -#source "drivers/l3/Kconfig" - -source "drivers/mfd/Kconfig" - -source "drivers/media/Kconfig" - -source "drivers/video/Kconfig" - -source "sound/Kconfig" - -source "drivers/hid/Kconfig" - -source "drivers/usb/Kconfig" - -source "drivers/uwb/Kconfig" - -source "drivers/mmc/Kconfig" - -source "drivers/memstick/Kconfig" - -source "drivers/accessibility/Kconfig" - -source "drivers/leds/Kconfig" - -source "drivers/rtc/Kconfig" - -source "drivers/dma/Kconfig" - -source "drivers/dca/Kconfig" - -source "drivers/auxdisplay/Kconfig" - -source "drivers/regulator/Kconfig" - -source "drivers/uio/Kconfig" - -source "drivers/staging/Kconfig" - -endmenu +source "drivers/Kconfig" source "fs/Kconfig" -- cgit v1.2.3 From 4d4e2bc268e188a8793ce96af20576374098c17b Mon Sep 17 00:00:00 2001 From: Marek Szyprowski Date: Wed, 24 Jun 2009 08:05:43 +0200 Subject: ARM: NCP: make ncp_iodesc static and move it to initdata section Make ncp_iodesc struct static to clean a public namespace a bit and move it to __initdata section to save memory a bit. Reviewed-by: Kyungmin Park Signed-off-by: Marek Szyprowski Signed-off-by: Ben Dooks --- arch/arm/mach-s3c6410/mach-ncp.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm/mach-s3c6410/mach-ncp.c b/arch/arm/mach-s3c6410/mach-ncp.c index 6030636f854..55e9bbfaf68 100644 --- a/arch/arm/mach-s3c6410/mach-ncp.c +++ b/arch/arm/mach-s3c6410/mach-ncp.c @@ -79,7 +79,7 @@ static struct platform_device *ncp_devices[] __initdata = { &s3c_device_i2c0, }; -struct map_desc ncp_iodesc[] = {}; +static struct map_desc ncp_iodesc[] __initdata = {}; static void __init ncp_map_io(void) { -- cgit v1.2.3 From bd258e525a40efc2c3798b76a725cd3d5c4e3d93 Mon Sep 17 00:00:00 2001 From: Matt Hsu Date: Mon, 29 Jun 2009 19:03:41 +0800 Subject: ARM: S3C64XX: Add UART2,UART3 support for SMDK6410 (resend) Add proper uartcfg for UART port 2,3 and tidy it up on SMDK6410. Signed-off-by: Matt Hsu Signed-off-by: Ben Dooks --- arch/arm/mach-s3c6410/mach-smdk6410.c | 26 ++++++++++++++++++++------ 1 file changed, 20 insertions(+), 6 deletions(-) diff --git a/arch/arm/mach-s3c6410/mach-smdk6410.c b/arch/arm/mach-s3c6410/mach-smdk6410.c index bc9a7dea567..ea51dbe76e3 100644 --- a/arch/arm/mach-s3c6410/mach-smdk6410.c +++ b/arch/arm/mach-s3c6410/mach-smdk6410.c @@ -65,16 +65,30 @@ static struct s3c2410_uartcfg smdk6410_uartcfgs[] __initdata = { [0] = { .hwport = 0, .flags = 0, - .ucon = 0x3c5, - .ulcon = 0x03, - .ufcon = 0x51, + .ucon = UCON, + .ulcon = ULCON, + .ufcon = UFCON, }, [1] = { .hwport = 1, .flags = 0, - .ucon = 0x3c5, - .ulcon = 0x03, - .ufcon = 0x51, + .ucon = UCON, + .ulcon = ULCON, + .ufcon = UFCON, + }, + [2] = { + .hwport = 2, + .flags = 0, + .ucon = UCON, + .ulcon = ULCON, + .ufcon = UFCON, + }, + [3] = { + .hwport = 3, + .flags = 0, + .ucon = UCON, + .ulcon = ULCON, + .ufcon = UFCON, }, }; -- cgit v1.2.3 From 25b15da14a789846672e73d19862b5fe5ad14346 Mon Sep 17 00:00:00 2001 From: Mark Brown Date: Tue, 4 Aug 2009 16:25:12 +0100 Subject: ARM: S3C64XX: Add mapping for IISv4 port Signed-off-by: Mark Brown Signed-off-by: Ben Dooks --- arch/arm/mach-s3c6400/include/mach/map.h | 1 + 1 file changed, 1 insertion(+) diff --git a/arch/arm/mach-s3c6400/include/mach/map.h b/arch/arm/mach-s3c6400/include/mach/map.h index 5057d9948d3..41d01a91a5a 100644 --- a/arch/arm/mach-s3c6400/include/mach/map.h +++ b/arch/arm/mach-s3c6400/include/mach/map.h @@ -46,6 +46,7 @@ #define S3C64XX_PA_IIS1 (0x7F003000) #define S3C64XX_PA_TIMER (0x7F006000) #define S3C64XX_PA_IIC0 (0x7F004000) +#define S3C64XX_PA_IISV4 (0x7F00D000) #define S3C64XX_PA_IIC1 (0x7F00F000) #define S3C64XX_PA_GPIO (0x7F008000) -- cgit v1.2.3 From c7c8f615c8d1b49225ed86406603e7ac24d2a6d9 Mon Sep 17 00:00:00 2001 From: Mark Brown Date: Wed, 5 Aug 2009 18:21:59 +0100 Subject: ARM: S3C64XX: Add address mapping for AC97 controller Signed-off-by: Mark Brown Signed-off-by: Ben Dooks --- arch/arm/mach-s3c6400/include/mach/map.h | 1 + 1 file changed, 1 insertion(+) diff --git a/arch/arm/mach-s3c6400/include/mach/map.h b/arch/arm/mach-s3c6400/include/mach/map.h index 41d01a91a5a..9fdf87ae47c 100644 --- a/arch/arm/mach-s3c6400/include/mach/map.h +++ b/arch/arm/mach-s3c6400/include/mach/map.h @@ -42,6 +42,7 @@ #define S3C64XX_PA_USB_HSOTG (0x7C000000) #define S3C64XX_PA_WATCHDOG (0x7E004000) #define S3C64XX_PA_SYSCON (0x7E00F000) +#define S3C64XX_PA_AC97 (0x7F001000) #define S3C64XX_PA_IIS0 (0x7F002000) #define S3C64XX_PA_IIS1 (0x7F003000) #define S3C64XX_PA_TIMER (0x7F006000) -- cgit v1.2.3 From c233d94931cebc8ec805fb98856f34ad16d49e4f Mon Sep 17 00:00:00 2001 From: Mark Brown Date: Wed, 5 Aug 2009 18:21:57 +0100 Subject: ARM: S3C: Move S3C64xx audio devices into S3C64xx directory Allowing us to make the Kconfig a little bit saner. Signed-off-by: Mark Brown Signed-off-by: Ben Dooks --- arch/arm/plat-s3c/Makefile | 1 - arch/arm/plat-s3c/dev-audio.c | 68 --------------------------------------- arch/arm/plat-s3c64xx/Makefile | 3 +- arch/arm/plat-s3c64xx/dev-audio.c | 68 +++++++++++++++++++++++++++++++++++++++ 4 files changed, 70 insertions(+), 70 deletions(-) delete mode 100644 arch/arm/plat-s3c/dev-audio.c create mode 100644 arch/arm/plat-s3c64xx/dev-audio.c diff --git a/arch/arm/plat-s3c/Makefile b/arch/arm/plat-s3c/Makefile index 3e27720ae35..f32d045e7e3 100644 --- a/arch/arm/plat-s3c/Makefile +++ b/arch/arm/plat-s3c/Makefile @@ -38,7 +38,6 @@ obj-$(CONFIG_S3C_DEV_HSMMC) += dev-hsmmc.o obj-$(CONFIG_S3C_DEV_HSMMC1) += dev-hsmmc1.o obj-y += dev-i2c0.o obj-$(CONFIG_S3C_DEV_I2C1) += dev-i2c1.o -obj-$(CONFIG_SND_S3C64XX_SOC_I2S) += dev-audio.o obj-$(CONFIG_S3C_DEV_FB) += dev-fb.o obj-$(CONFIG_S3C_DEV_USB_HOST) += dev-usb.o obj-$(CONFIG_S3C_DEV_USB_HSOTG) += dev-usb-hsotg.o diff --git a/arch/arm/plat-s3c/dev-audio.c b/arch/arm/plat-s3c/dev-audio.c deleted file mode 100644 index 1322beb40dd..00000000000 --- a/arch/arm/plat-s3c/dev-audio.c +++ /dev/null @@ -1,68 +0,0 @@ -/* linux/arch/arm/plat-s3c/dev-audio.c - * - * Copyright 2009 Wolfson Microelectronics - * Mark Brown - * - - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#include -#include -#include - -#include -#include - -#include - - -static struct resource s3c64xx_iis0_resource[] = { - [0] = { - .start = S3C64XX_PA_IIS0, - .end = S3C64XX_PA_IIS0 + 0x100 - 1, - .flags = IORESOURCE_MEM, - }, -}; - -struct platform_device s3c64xx_device_iis0 = { - .name = "s3c64xx-iis", - .id = 0, - .num_resources = ARRAY_SIZE(s3c64xx_iis0_resource), - .resource = s3c64xx_iis0_resource, -}; -EXPORT_SYMBOL(s3c64xx_device_iis0); - -static struct resource s3c64xx_iis1_resource[] = { - [0] = { - .start = S3C64XX_PA_IIS1, - .end = S3C64XX_PA_IIS1 + 0x100 - 1, - .flags = IORESOURCE_MEM, - }, -}; - -struct platform_device s3c64xx_device_iis1 = { - .name = "s3c64xx-iis", - .id = 1, - .num_resources = ARRAY_SIZE(s3c64xx_iis1_resource), - .resource = s3c64xx_iis1_resource, -}; -EXPORT_SYMBOL(s3c64xx_device_iis1); - -static struct resource s3c64xx_iisv4_resource[] = { - [0] = { - .start = S3C64XX_PA_IISV4, - .end = S3C64XX_PA_IISV4 + 0x100 - 1, - .flags = IORESOURCE_MEM, - }, -}; - -struct platform_device s3c64xx_device_iisv4 = { - .name = "s3c64xx-iis-v4", - .id = -1, - .num_resources = ARRAY_SIZE(s3c64xx_iisv4_resource), - .resource = s3c64xx_iisv4_resource, -}; -EXPORT_SYMBOL(s3c64xx_device_iisv4); diff --git a/arch/arm/plat-s3c64xx/Makefile b/arch/arm/plat-s3c64xx/Makefile index 3c8882cd626..b85b4359e93 100644 --- a/arch/arm/plat-s3c64xx/Makefile +++ b/arch/arm/plat-s3c64xx/Makefile @@ -40,4 +40,5 @@ obj-$(CONFIG_S3C64XX_DMA) += dma.o obj-$(CONFIG_S3C64XX_SETUP_I2C0) += setup-i2c0.o obj-$(CONFIG_S3C64XX_SETUP_I2C1) += setup-i2c1.o obj-$(CONFIG_S3C64XX_SETUP_FB_24BPP) += setup-fb-24bpp.o -obj-$(CONFIG_S3C64XX_SETUP_SDHCI_GPIO) += setup-sdhci-gpio.o \ No newline at end of file +obj-$(CONFIG_S3C64XX_SETUP_SDHCI_GPIO) += setup-sdhci-gpio.o +obj-$(CONFIG_SND_S3C24XX_SOC) += dev-audio.o diff --git a/arch/arm/plat-s3c64xx/dev-audio.c b/arch/arm/plat-s3c64xx/dev-audio.c new file mode 100644 index 00000000000..1322beb40dd --- /dev/null +++ b/arch/arm/plat-s3c64xx/dev-audio.c @@ -0,0 +1,68 @@ +/* linux/arch/arm/plat-s3c/dev-audio.c + * + * Copyright 2009 Wolfson Microelectronics + * Mark Brown + * + + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include +#include +#include + +#include +#include + +#include + + +static struct resource s3c64xx_iis0_resource[] = { + [0] = { + .start = S3C64XX_PA_IIS0, + .end = S3C64XX_PA_IIS0 + 0x100 - 1, + .flags = IORESOURCE_MEM, + }, +}; + +struct platform_device s3c64xx_device_iis0 = { + .name = "s3c64xx-iis", + .id = 0, + .num_resources = ARRAY_SIZE(s3c64xx_iis0_resource), + .resource = s3c64xx_iis0_resource, +}; +EXPORT_SYMBOL(s3c64xx_device_iis0); + +static struct resource s3c64xx_iis1_resource[] = { + [0] = { + .start = S3C64XX_PA_IIS1, + .end = S3C64XX_PA_IIS1 + 0x100 - 1, + .flags = IORESOURCE_MEM, + }, +}; + +struct platform_device s3c64xx_device_iis1 = { + .name = "s3c64xx-iis", + .id = 1, + .num_resources = ARRAY_SIZE(s3c64xx_iis1_resource), + .resource = s3c64xx_iis1_resource, +}; +EXPORT_SYMBOL(s3c64xx_device_iis1); + +static struct resource s3c64xx_iisv4_resource[] = { + [0] = { + .start = S3C64XX_PA_IISV4, + .end = S3C64XX_PA_IISV4 + 0x100 - 1, + .flags = IORESOURCE_MEM, + }, +}; + +struct platform_device s3c64xx_device_iisv4 = { + .name = "s3c64xx-iis-v4", + .id = -1, + .num_resources = ARRAY_SIZE(s3c64xx_iisv4_resource), + .resource = s3c64xx_iisv4_resource, +}; +EXPORT_SYMBOL(s3c64xx_device_iisv4); -- cgit v1.2.3 From 229fd8ffba57dfaea59078b9144371369ffdb0a3 Mon Sep 17 00:00:00 2001 From: Ben Dooks Date: Mon, 3 Aug 2009 17:26:57 +0100 Subject: ARM: S3C24XX: Add FIQ IRQ routing support Add support for routing an IRQ from the normal ARM IRQ mechanism to the FIQ input of the processor. Note, also fix a bug where the init_FIQ() function has not been called when CONFIG_FIQ is enabled. Signed-off-by; Ben Dooks Signed-off-by: Ben Dooks --- arch/arm/plat-s3c24xx/include/plat/fiq.h | 13 ++++++++++++ arch/arm/plat-s3c24xx/irq.c | 36 ++++++++++++++++++++++++++++++++ 2 files changed, 49 insertions(+) create mode 100644 arch/arm/plat-s3c24xx/include/plat/fiq.h diff --git a/arch/arm/plat-s3c24xx/include/plat/fiq.h b/arch/arm/plat-s3c24xx/include/plat/fiq.h new file mode 100644 index 00000000000..8521b8372c5 --- /dev/null +++ b/arch/arm/plat-s3c24xx/include/plat/fiq.h @@ -0,0 +1,13 @@ +/* linux/include/asm-arm/plat-s3c24xx/fiq.h + * + * Copyright (c) 2009 Simtec Electronics + * Ben Dooks + * + * Header file for S3C24XX CPU FIQ support + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +extern int s3c24xx_set_fiq(unsigned int irq, bool on); diff --git a/arch/arm/plat-s3c24xx/irq.c b/arch/arm/plat-s3c24xx/irq.c index 958737775ad..d02f5f02045 100644 --- a/arch/arm/plat-s3c24xx/irq.c +++ b/arch/arm/plat-s3c24xx/irq.c @@ -493,6 +493,38 @@ s3c_irq_demux_extint4t7(unsigned int irq, } } +#ifdef CONFIG_FIQ +/** + * s3c24xx_set_fiq - set the FIQ routing + * @irq: IRQ number to route to FIQ on processor. + * @on: Whether to route @irq to the FIQ, or to remove the FIQ routing. + * + * Change the state of the IRQ to FIQ routing depending on @irq and @on. If + * @on is true, the @irq is checked to see if it can be routed and the + * interrupt controller updated to route the IRQ. If @on is false, the FIQ + * routing is cleared, regardless of which @irq is specified. + */ +int s3c24xx_set_fiq(unsigned int irq, bool on) +{ + u32 intmod; + unsigned offs; + + if (on) { + offs = irq - FIQ_START; + if (offs > 31) + return -EINVAL; + + intmod = 1 << offs; + } else { + intmod = 0; + } + + __raw_writel(intmod, S3C2410_INTMOD); + return 0; +} +#endif + + /* s3c24xx_init_irq * * Initialise S3C2410 IRQ system @@ -505,6 +537,10 @@ void __init s3c24xx_init_irq(void) int irqno; int i; +#ifdef CONFIG_FIQ + init_FIQ(); +#endif + irqdbf("s3c2410_init_irq: clearing interrupt status flags\n"); /* first, clear all interrupts pending... */ -- cgit v1.2.3 From d91e9a7ab93e09e5a0fbed73f3a6a330f14620a4 Mon Sep 17 00:00:00 2001 From: Mark Brown Date: Wed, 5 Aug 2009 18:29:57 +0100 Subject: ARM: S3C24XX: Add platform device for AC97 controller Move the definition of the "generic" IRQ in the process. Signed-off-by: Mark Brown Signed-off-by: Ben Dooks --- arch/arm/mach-s3c2410/include/mach/irqs.h | 6 ++++ arch/arm/plat-s3c/include/plat/devs.h | 1 + arch/arm/plat-s3c24xx/devs.c | 50 +++++++++++++++++++++++++++++++ sound/soc/s3c24xx/s3c24xx-ac97.h | 6 ---- 4 files changed, 57 insertions(+), 6 deletions(-) diff --git a/arch/arm/mach-s3c2410/include/mach/irqs.h b/arch/arm/mach-s3c2410/include/mach/irqs.h index 2a2384ffa7b..6c12c6312ad 100644 --- a/arch/arm/mach-s3c2410/include/mach/irqs.h +++ b/arch/arm/mach-s3c2410/include/mach/irqs.h @@ -164,6 +164,12 @@ #define IRQ_S3CUART_TX3 IRQ_S3C2443_TX3 #define IRQ_S3CUART_ERR3 IRQ_S3C2443_ERR3 +#ifdef CONFIG_CPU_S3C2440 +#define IRQ_S3C244x_AC97 IRQ_S3C2440_AC97 +#else +#define IRQ_S3C244x_AC97 IRQ_S3C2443_AC97 +#endif + /* Our FIQs are routable from IRQ_EINT0 to IRQ_ADCPARENT */ #define FIQ_START IRQ_EINT0 diff --git a/arch/arm/plat-s3c/include/plat/devs.h b/arch/arm/plat-s3c/include/plat/devs.h index 2e170827e0b..2e6599411c2 100644 --- a/arch/arm/plat-s3c/include/plat/devs.h +++ b/arch/arm/plat-s3c/include/plat/devs.h @@ -56,5 +56,6 @@ extern struct platform_device s3c_device_usb_hsotg; #ifdef CONFIG_CPU_S3C2440 extern struct platform_device s3c_device_camif; +extern struct platform_device s3c_device_ac97; #endif diff --git a/arch/arm/plat-s3c24xx/devs.c b/arch/arm/plat-s3c24xx/devs.c index 4eb378c89a3..4553ad6c7ad 100644 --- a/arch/arm/plat-s3c24xx/devs.c +++ b/arch/arm/plat-s3c24xx/devs.c @@ -26,6 +26,8 @@ #include #include #include +#include +#include #include #include @@ -473,4 +475,52 @@ struct platform_device s3c_device_camif = { EXPORT_SYMBOL(s3c_device_camif); +/* AC97 */ + +static struct resource s3c_ac97_resource[] = { + [0] = { + .start = S3C2440_PA_AC97, + .end = S3C2440_PA_AC97 + S3C2440_SZ_AC97 -1, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = IRQ_S3C244x_AC97, + .end = IRQ_S3C244x_AC97, + .flags = IORESOURCE_IRQ, + }, + [2] = { + .name = "PCM out", + .start = DMACH_PCM_OUT, + .end = DMACH_PCM_OUT, + .flags = IORESOURCE_DMA, + }, + [3] = { + .name = "PCM in", + .start = DMACH_PCM_IN, + .end = DMACH_PCM_IN, + .flags = IORESOURCE_DMA, + }, + [4] = { + .name = "Mic in", + .start = DMACH_MIC_IN, + .end = DMACH_MIC_IN, + .flags = IORESOURCE_DMA, + }, +}; + +static u64 s3c_device_ac97_dmamask = 0xffffffffUL; + +struct platform_device s3c_device_ac97 = { + .name = "s3c-ac97", + .id = -1, + .num_resources = ARRAY_SIZE(s3c_ac97_resource), + .resource = s3c_ac97_resource, + .dev = { + .dma_mask = &s3c_device_ac97_dmamask, + .coherent_dma_mask = 0xffffffffUL + } +}; + +EXPORT_SYMBOL(s3c_device_ac97); + #endif // CONFIG_CPU_S32440 diff --git a/sound/soc/s3c24xx/s3c24xx-ac97.h b/sound/soc/s3c24xx/s3c24xx-ac97.h index a96dcadf28b..e96f941a810 100644 --- a/sound/soc/s3c24xx/s3c24xx-ac97.h +++ b/sound/soc/s3c24xx/s3c24xx-ac97.h @@ -20,12 +20,6 @@ #define AC_CMD_ADDR(x) (x << 16) #define AC_CMD_DATA(x) (x & 0xffff) -#ifdef CONFIG_CPU_S3C2440 -#define IRQ_S3C244x_AC97 IRQ_S3C2440_AC97 -#else -#define IRQ_S3C244x_AC97 IRQ_S3C2443_AC97 -#endif - extern struct snd_soc_dai s3c2443_ac97_dai[]; #endif /*S3C24XXAC97_H_*/ -- cgit v1.2.3 From a2c195fdde20772a90ee98ce3523dcfbda49eee6 Mon Sep 17 00:00:00 2001 From: Ben Dooks Date: Mon, 3 Aug 2009 17:26:50 +0100 Subject: ARM: S3C24XX: Add SPI bus 1 on GPD8 through GPD10 Add configuration callback for SPI bus 1 on GPD[8..10] and ensure the correct GPIO configuration register definitions in regs-gpio.h Signed-off-by: Ben Dooks Signed-off-by: Ben Dooks --- arch/arm/mach-s3c2410/include/mach/regs-gpio.h | 4 ++- arch/arm/mach-s3c2410/include/mach/spi.h | 3 ++ arch/arm/plat-s3c24xx/Kconfig | 6 ++++ arch/arm/plat-s3c24xx/Makefile | 1 + arch/arm/plat-s3c24xx/spi-bus1-gpd8_9_10.c | 38 ++++++++++++++++++++++++++ 5 files changed, 51 insertions(+), 1 deletion(-) create mode 100644 arch/arm/plat-s3c24xx/spi-bus1-gpd8_9_10.c diff --git a/arch/arm/mach-s3c2410/include/mach/regs-gpio.h b/arch/arm/mach-s3c2410/include/mach/regs-gpio.h index b278d0c45cc..f6e8eec879c 100644 --- a/arch/arm/mach-s3c2410/include/mach/regs-gpio.h +++ b/arch/arm/mach-s3c2410/include/mach/regs-gpio.h @@ -328,13 +328,15 @@ #define S3C2410_GPD8_VD16 (0x02 << 16) #define S3C2400_GPD8_TOUT3 (0x02 << 16) +#define S3C2440_GPD8_SPIMISO1 (0x03 << 16) #define S3C2410_GPD9_VD17 (0x02 << 18) #define S3C2400_GPD9_TCLK0 (0x02 << 18) -#define S3C2410_GPD9_MASK (0x03 << 18) +#define S3C2440_GPD9_SPIMOSI1 (0x03 << 18) #define S3C2410_GPD10_VD18 (0x02 << 20) #define S3C2400_GPD10_nWAIT (0x02 << 20) +#define S3C2440_GPD10_SPICLK1 (0x03 << 20) #define S3C2410_GPD11_VD19 (0x02 << 22) diff --git a/arch/arm/mach-s3c2410/include/mach/spi.h b/arch/arm/mach-s3c2410/include/mach/spi.h index 1d300fb112b..193b39d654e 100644 --- a/arch/arm/mach-s3c2410/include/mach/spi.h +++ b/arch/arm/mach-s3c2410/include/mach/spi.h @@ -30,4 +30,7 @@ extern void s3c24xx_spi_gpiocfg_bus0_gpe11_12_13(struct s3c2410_spi_info *spi, extern void s3c24xx_spi_gpiocfg_bus1_gpg5_6_7(struct s3c2410_spi_info *spi, int enable); +extern void s3c24xx_spi_gpiocfg_bus1_gpd8_9_10(struct s3c2410_spi_info *spi, + int enable); + #endif /* __ASM_ARCH_SPI_H */ diff --git a/arch/arm/plat-s3c24xx/Kconfig b/arch/arm/plat-s3c24xx/Kconfig index 5b0bc914f58..aaae456018b 100644 --- a/arch/arm/plat-s3c24xx/Kconfig +++ b/arch/arm/plat-s3c24xx/Kconfig @@ -105,6 +105,12 @@ config S3C24XX_SPI_BUS1_GPG5_GPG6_GPG7 SPI GPIO configuration code for BUS 1 when connected to GPG5, GPG6 and GPG7. +config S3C24XX_SPI_BUS1_GPD8_GPD9_GPD10 + bool + help + SPI GPIO configuration code for BUS 1 when connected to + GPD8, GPD9 and GPD10. + # common code for s3c24xx based machines, such as the SMDKs. config MACH_SMDK diff --git a/arch/arm/plat-s3c24xx/Makefile b/arch/arm/plat-s3c24xx/Makefile index 579a165c282..59416796fb1 100644 --- a/arch/arm/plat-s3c24xx/Makefile +++ b/arch/arm/plat-s3c24xx/Makefile @@ -41,6 +41,7 @@ obj-$(CONFIG_ARCH_S3C2410) += setup-i2c.o obj-$(CONFIG_S3C24XX_SPI_BUS0_GPE11_GPE12_GPE13) += spi-bus0-gpe11_12_13.o obj-$(CONFIG_S3C24XX_SPI_BUS1_GPG5_GPG6_GPG7) += spi-bus1-gpg5_6_7.o +obj-$(CONFIG_S3C24XX_SPI_BUS1_GPD8_GPD9_GPD10) += spi-bus1-gpd8_9_10.o # machine common support diff --git a/arch/arm/plat-s3c24xx/spi-bus1-gpd8_9_10.c b/arch/arm/plat-s3c24xx/spi-bus1-gpd8_9_10.c new file mode 100644 index 00000000000..89fcf5308cf --- /dev/null +++ b/arch/arm/plat-s3c24xx/spi-bus1-gpd8_9_10.c @@ -0,0 +1,38 @@ +/* linux/arch/arm/plat-s3c24xx/spi-bus0-gpd8_9_10.c + * + * Copyright (c) 2008 Simtec Electronics + * http://armlinux.simtec.co.uk/ + * Ben Dooks + * + * S3C24XX SPI - gpio configuration for bus 1 on gpd8,9,10 + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License. +*/ + +#include +#include + +#include +#include + +void s3c24xx_spi_gpiocfg_bus1_gpd8_9_10(struct s3c2410_spi_info *spi, + int enable) +{ + + printk(KERN_INFO "%s(%d)\n", __func__, enable); + if (enable) { + s3c2410_gpio_cfgpin(S3C2410_GPD(10), S3C2440_GPD10_SPICLK1); + s3c2410_gpio_cfgpin(S3C2410_GPD(9), S3C2440_GPD9_SPIMOSI1); + s3c2410_gpio_cfgpin(S3C2410_GPD(8), S3C2440_GPD8_SPIMISO1); + s3c2410_gpio_pullup(S3C2410_GPD(10), 0); + s3c2410_gpio_pullup(S3C2410_GPD(9), 0); + } else { + s3c2410_gpio_cfgpin(S3C2410_GPD(8), S3C2410_GPIO_INPUT); + s3c2410_gpio_cfgpin(S3C2410_GPD(9), S3C2410_GPIO_INPUT); + s3c2410_gpio_pullup(S3C2410_GPD(10), 1); + s3c2410_gpio_pullup(S3C2410_GPD(9), 1); + s3c2410_gpio_pullup(S3C2410_GPD(8), 1); + } +} -- cgit v1.2.3 From cf87a6e2fe95891575c45ba1a0ecb8cf53c09732 Mon Sep 17 00:00:00 2001 From: Sascha Hauer Date: Mon, 20 Jul 2009 08:18:47 +0200 Subject: ARM: mxc: Fix i2c_board_info definitions Fix i2c_board_info definitions - we were defining the 'type' field of these structures twice since the first argument of I2C_BOARD_INFO sets this field. Move the second definition into I2C_BOARD_INFO(). Signed-off-by: Sascha Hauer Acked-by: Jean Delvare --- arch/arm/mach-mx1/mx1ads.c | 6 ++---- arch/arm/mach-mx2/eukrea_cpuimx27.c | 3 +-- arch/arm/mach-mx2/pcm038.c | 12 ++++-------- arch/arm/mach-mx3/pcm037.c | 3 +-- arch/arm/mach-mx3/pcm043.c | 3 +-- 5 files changed, 9 insertions(+), 18 deletions(-) diff --git a/arch/arm/mach-mx1/mx1ads.c b/arch/arm/mach-mx1/mx1ads.c index 6af064d19b0..30f04e56faf 100644 --- a/arch/arm/mach-mx1/mx1ads.c +++ b/arch/arm/mach-mx1/mx1ads.c @@ -104,12 +104,10 @@ static struct imxi2c_platform_data mx1ads_i2c_data = { static struct i2c_board_info mx1ads_i2c_devices[] = { { - I2C_BOARD_INFO("pcf857x", 0x22), - .type = "pcf8575", + I2C_BOARD_INFO("pcf8575", 0x22), .platform_data = &pcf857x_data[0], }, { - I2C_BOARD_INFO("pcf857x", 0x24), - .type = "pcf8575", + I2C_BOARD_INFO("pcf8575", 0x24), .platform_data = &pcf857x_data[1], }, }; diff --git a/arch/arm/mach-mx2/eukrea_cpuimx27.c b/arch/arm/mach-mx2/eukrea_cpuimx27.c index a2c4181892c..7b187606682 100644 --- a/arch/arm/mach-mx2/eukrea_cpuimx27.c +++ b/arch/arm/mach-mx2/eukrea_cpuimx27.c @@ -135,8 +135,7 @@ static struct imxi2c_platform_data eukrea_cpuimx27_i2c_1_data = { static struct i2c_board_info eukrea_cpuimx27_i2c_devices[] = { { - I2C_BOARD_INFO("rtc-pcf8563", 0x51), - .type = "pcf8563" + I2C_BOARD_INFO("pcf8563", 0x51), }, }; diff --git a/arch/arm/mach-mx2/pcm038.c b/arch/arm/mach-mx2/pcm038.c index 638d078304c..9a3483c8f58 100644 --- a/arch/arm/mach-mx2/pcm038.c +++ b/arch/arm/mach-mx2/pcm038.c @@ -186,17 +186,13 @@ static struct at24_platform_data board_eeprom = { }; static struct i2c_board_info pcm038_i2c_devices[] = { - [0] = { + { I2C_BOARD_INFO("at24", 0x52), /* E0=0, E1=1, E2=0 */ .platform_data = &board_eeprom, - }, - [1] = { - I2C_BOARD_INFO("rtc-pcf8563", 0x51), - .type = "pcf8563" - }, - [2] = { + }, { + I2C_BOARD_INFO("pcf8563", 0x51), + }, { I2C_BOARD_INFO("lm75", 0x4a), - .type = "lm75" } }; diff --git a/arch/arm/mach-mx3/pcm037.c b/arch/arm/mach-mx3/pcm037.c index 1b9140e2303..b1b3282d15d 100644 --- a/arch/arm/mach-mx3/pcm037.c +++ b/arch/arm/mach-mx3/pcm037.c @@ -339,8 +339,7 @@ static struct i2c_board_info pcm037_i2c_devices[] = { I2C_BOARD_INFO("at24", 0x52), /* E0=0, E1=1, E2=0 */ .platform_data = &board_eeprom, }, { - I2C_BOARD_INFO("rtc-pcf8563", 0x51), - .type = "pcf8563", + I2C_BOARD_INFO("pcf8563", 0x51), } }; diff --git a/arch/arm/mach-mx3/pcm043.c b/arch/arm/mach-mx3/pcm043.c index 7c7d3cc07b8..e43276ea3b7 100644 --- a/arch/arm/mach-mx3/pcm043.c +++ b/arch/arm/mach-mx3/pcm043.c @@ -133,8 +133,7 @@ static struct i2c_board_info pcm043_i2c_devices[] = { I2C_BOARD_INFO("at24", 0x52), /* E0=0, E1=1, E2=0 */ .platform_data = &board_eeprom, }, { - I2C_BOARD_INFO("rtc-pcf8563", 0x51), - .type = "pcf8563", + I2C_BOARD_INFO("pcf8563", 0x51), } }; #endif -- cgit v1.2.3 From c372a5cf4cde161c7f59bbe7a9ebcfce9cb2c2f8 Mon Sep 17 00:00:00 2001 From: Daniel Mack Date: Thu, 25 Jun 2009 12:37:16 +0200 Subject: ARM: MX3: add ckil clock The CKIL clock source is used by the upcoming RTC driver, so we need to export it. Signed-off-by: Daniel Mack Signed-off-by: Sascha Hauer --- arch/arm/mach-mx3/clock.c | 7 +++++++ 1 file changed, 7 insertions(+) diff --git a/arch/arm/mach-mx3/clock.c b/arch/arm/mach-mx3/clock.c index 2b29491c22b..4742554e996 100644 --- a/arch/arm/mach-mx3/clock.c +++ b/arch/arm/mach-mx3/clock.c @@ -403,6 +403,11 @@ static unsigned long clk_ckih_get_rate(struct clk *clk) return ckih_rate; } +static unsigned long clk_ckil_get_rate(struct clk *clk) +{ + return CKIL_CLK_FREQ; +} + static struct clk ckih_clk = { .get_rate = clk_ckih_get_rate, }; @@ -509,6 +514,7 @@ DEFINE_CLOCK(usb_clk1, 0, NULL, 0, usb_get_rate, NULL, &usb_pll_clk) DEFINE_CLOCK(nfc_clk, 0, NULL, 0, nfc_get_rate, NULL, &ahb_clk); DEFINE_CLOCK(scc_clk, 0, NULL, 0, NULL, NULL, &ipg_clk); DEFINE_CLOCK(ipg_clk, 0, NULL, 0, ipg_get_rate, NULL, &ahb_clk); +DEFINE_CLOCK(ckil_clk, 0, NULL, 0, clk_ckil_get_rate, NULL, NULL); #define _REGISTER_CLOCK(d, n, c) \ { \ @@ -566,6 +572,7 @@ static struct clk_lookup lookups[] = { _REGISTER_CLOCK(NULL, "iim", iim_clk) _REGISTER_CLOCK(NULL, "mpeg4", mpeg4_clk) _REGISTER_CLOCK(NULL, "mbx", mbx_clk) + _REGISTER_CLOCK("mxc_rtc", NULL, ckil_clk) }; int __init mx31_clocks_init(unsigned long fref) -- cgit v1.2.3 From 12b8eb865285c95d6e2c02555f066e3f949e090d Mon Sep 17 00:00:00 2001 From: Sascha Hauer Date: Mon, 25 May 2009 10:50:52 +0200 Subject: MXC: use variable for irq controller base in entry-macro.S This allows us to determine the irq controller base address on runtime. Signed-off-by: Sascha Hauer --- arch/arm/plat-mxc/include/mach/entry-macro.S | 3 ++- arch/arm/plat-mxc/irq.c | 2 +- 2 files changed, 3 insertions(+), 2 deletions(-) diff --git a/arch/arm/plat-mxc/include/mach/entry-macro.S b/arch/arm/plat-mxc/include/mach/entry-macro.S index 5f01d60da84..7cf290efe76 100644 --- a/arch/arm/plat-mxc/include/mach/entry-macro.S +++ b/arch/arm/plat-mxc/include/mach/entry-macro.S @@ -18,7 +18,8 @@ .endm .macro get_irqnr_preamble, base, tmp - ldr \base, =AVIC_IO_ADDRESS(AVIC_BASE_ADDR) + ldr \base, =avic_base + ldr \base, [\base] #ifdef CONFIG_MXC_IRQ_PRIOR ldr r4, [\base, #AVIC_NIMASK] #endif diff --git a/arch/arm/plat-mxc/irq.c b/arch/arm/plat-mxc/irq.c index 618a8b24ed1..778ddfe57d8 100644 --- a/arch/arm/plat-mxc/irq.c +++ b/arch/arm/plat-mxc/irq.c @@ -44,7 +44,7 @@ #define AVIC_FIPNDH 0x60 /* fast int pending high */ #define AVIC_FIPNDL 0x64 /* fast int pending low */ -static void __iomem *avic_base; +void __iomem *avic_base; int imx_irq_set_priority(unsigned char irq, unsigned char prio) { -- cgit v1.2.3 From fc2a9f0bc7f6dd4966dc57fb98b8697c83b6d035 Mon Sep 17 00:00:00 2001 From: Sascha Hauer Date: Wed, 27 May 2009 18:09:54 +0200 Subject: MXC: i.MX25 timer support Signed-off-by: Sascha Hauer --- arch/arm/plat-mxc/time.c | 18 +++++++++--------- 1 file changed, 9 insertions(+), 9 deletions(-) diff --git a/arch/arm/plat-mxc/time.c b/arch/arm/plat-mxc/time.c index 7e71bb6270e..59e33a3bf7f 100644 --- a/arch/arm/plat-mxc/time.c +++ b/arch/arm/plat-mxc/time.c @@ -47,7 +47,7 @@ #define MX2_TSTAT_CAPT (1 << 1) #define MX2_TSTAT_COMP (1 << 0) -/* MX31, MX35 */ +/* MX31, MX35, MX25 */ #define MX3_TCTL_WAITEN (1 << 3) #define MX3_TCTL_CLK_IPG (1 << 6) #define MX3_TCTL_FRR (1 << 9) @@ -66,7 +66,7 @@ static inline void gpt_irq_disable(void) { unsigned int tmp; - if (cpu_is_mx3()) + if (cpu_is_mx3() || cpu_is_mx25()) __raw_writel(0, timer_base + MX3_IR); else { tmp = __raw_readl(timer_base + MXC_TCTL); @@ -76,7 +76,7 @@ static inline void gpt_irq_disable(void) static inline void gpt_irq_enable(void) { - if (cpu_is_mx3()) + if (cpu_is_mx3() || cpu_is_mx25()) __raw_writel(1<<0, timer_base + MX3_IR); else { __raw_writel(__raw_readl(timer_base + MXC_TCTL) | MX1_2_TCTL_IRQEN, @@ -90,7 +90,7 @@ static void gpt_irq_acknowledge(void) __raw_writel(0, timer_base + MX1_2_TSTAT); if (cpu_is_mx2()) __raw_writel(MX2_TSTAT_CAPT | MX2_TSTAT_COMP, timer_base + MX1_2_TSTAT); - if (cpu_is_mx3()) + if (cpu_is_mx3() || cpu_is_mx25()) __raw_writel(MX3_TSTAT_OF1, timer_base + MX3_TSTAT); } @@ -117,7 +117,7 @@ static int __init mxc_clocksource_init(struct clk *timer_clk) { unsigned int c = clk_get_rate(timer_clk); - if (cpu_is_mx3()) + if (cpu_is_mx3() || cpu_is_mx25()) clocksource_mxc.read = mx3_get_cycles; clocksource_mxc.mult = clocksource_hz2mult(c, @@ -180,7 +180,7 @@ static void mxc_set_mode(enum clock_event_mode mode, if (mode != clockevent_mode) { /* Set event time into far-far future */ - if (cpu_is_mx3()) + if (cpu_is_mx3() || cpu_is_mx25()) __raw_writel(__raw_readl(timer_base + MX3_TCN) - 3, timer_base + MX3_TCMP); else @@ -233,7 +233,7 @@ static irqreturn_t mxc_timer_interrupt(int irq, void *dev_id) struct clock_event_device *evt = &clockevent_mxc; uint32_t tstat; - if (cpu_is_mx3()) + if (cpu_is_mx3() || cpu_is_mx25()) tstat = __raw_readl(timer_base + MX3_TSTAT); else tstat = __raw_readl(timer_base + MX1_2_TSTAT); @@ -264,7 +264,7 @@ static int __init mxc_clockevent_init(struct clk *timer_clk) { unsigned int c = clk_get_rate(timer_clk); - if (cpu_is_mx3()) + if (cpu_is_mx3() || cpu_is_mx25()) clockevent_mxc.set_next_event = mx3_set_next_event; clockevent_mxc.mult = div_sc(c, NSEC_PER_SEC, @@ -296,7 +296,7 @@ void __init mxc_timer_init(struct clk *timer_clk, void __iomem *base, int irq) __raw_writel(0, timer_base + MXC_TCTL); __raw_writel(0, timer_base + MXC_TPRER); /* see datasheet note */ - if (cpu_is_mx3()) + if (cpu_is_mx3() || cpu_is_mx25()) tctl_val = MX3_TCTL_CLK_IPG | MX3_TCTL_FRR | MX3_TCTL_WAITEN | MXC_TCTL_TEN; else tctl_val = MX1_2_TCTL_FRR | MX1_2_TCTL_CLK_PCLK1 | MXC_TCTL_TEN; -- cgit v1.2.3 From 6134b2cbb0e24f897fd1063745638397809fca29 Mon Sep 17 00:00:00 2001 From: Sascha Hauer Date: Thu, 4 Jun 2009 11:16:22 +0200 Subject: iomux-v3: Allow for a runtime base address also, check for a valid pad_ctrl_ofs before changing the pad control register. Signed-off-by: Sascha Hauer --- arch/arm/mach-mx3/mm.c | 2 ++ arch/arm/plat-mxc/include/mach/iomux-v3.h | 5 +++++ arch/arm/plat-mxc/iomux-v3.c | 15 ++++++++++----- 3 files changed, 17 insertions(+), 5 deletions(-) diff --git a/arch/arm/mach-mx3/mm.c b/arch/arm/mach-mx3/mm.c index c327172159c..ad5a1122d76 100644 --- a/arch/arm/mach-mx3/mm.c +++ b/arch/arm/mach-mx3/mm.c @@ -30,6 +30,7 @@ #include #include +#include /*! * @file mm.c @@ -83,6 +84,7 @@ void __init mx31_map_io(void) void __init mx35_map_io(void) { mxc_set_cpu_type(MXC_CPU_MX35); + mxc_iomux_v3_init(IO_ADDRESS(IOMUXC_BASE_ADDR)); mxc_arch_reset_init(IO_ADDRESS(WDOG_BASE_ADDR)); iotable_init(mxc_io_desc, ARRAY_SIZE(mxc_io_desc)); diff --git a/arch/arm/plat-mxc/include/mach/iomux-v3.h b/arch/arm/plat-mxc/include/mach/iomux-v3.h index cd06df9370c..a0fa4026546 100644 --- a/arch/arm/plat-mxc/include/mach/iomux-v3.h +++ b/arch/arm/plat-mxc/include/mach/iomux-v3.h @@ -113,5 +113,10 @@ void mxc_iomux_v3_release_pad(struct pad_desc *pad); */ void mxc_iomux_v3_release_multiple_pads(struct pad_desc *pad_list, int count); +/* + * Initialise the iomux controller + */ +void mxc_iomux_v3_init(void __iomem *iomux_v3_base); + #endif /* __MACH_IOMUX_V3_H__*/ diff --git a/arch/arm/plat-mxc/iomux-v3.c b/arch/arm/plat-mxc/iomux-v3.c index 77a078f9513..851ca99bf1b 100644 --- a/arch/arm/plat-mxc/iomux-v3.c +++ b/arch/arm/plat-mxc/iomux-v3.c @@ -29,7 +29,7 @@ #include #include -#define IOMUX_BASE IO_ADDRESS(IOMUXC_BASE_ADDR) +static void __iomem *base; static unsigned long iomux_v3_pad_alloc_map[0x200 / BITS_PER_LONG]; @@ -45,14 +45,14 @@ int mxc_iomux_v3_setup_pad(struct pad_desc *pad) if (test_and_set_bit(pad_ofs >> 2, iomux_v3_pad_alloc_map)) return -EBUSY; if (pad->mux_ctrl_ofs) - __raw_writel(pad->mux_mode, IOMUX_BASE + pad->mux_ctrl_ofs); + __raw_writel(pad->mux_mode, base + pad->mux_ctrl_ofs); if (pad->select_input_ofs) __raw_writel(pad->select_input, - IOMUX_BASE + pad->select_input_ofs); + base + pad->select_input_ofs); - if (!(pad->pad_ctrl & NO_PAD_CTRL)) - __raw_writel(pad->pad_ctrl, IOMUX_BASE + pad->pad_ctrl_ofs); + if (!(pad->pad_ctrl & NO_PAD_CTRL) && pad->pad_ctrl_ofs) + __raw_writel(pad->pad_ctrl, base + pad->pad_ctrl_ofs); return 0; } EXPORT_SYMBOL(mxc_iomux_v3_setup_pad); @@ -96,3 +96,8 @@ void mxc_iomux_v3_release_multiple_pads(struct pad_desc *pad_list, int count) } } EXPORT_SYMBOL(mxc_iomux_v3_release_multiple_pads); + +void mxc_iomux_v3_init(void __iomem *iomux_v3_base) +{ + base = iomux_v3_base; +} -- cgit v1.2.3 From a058cbc17901108de9179dccdb29dff0e00c79fe Mon Sep 17 00:00:00 2001 From: Sascha Hauer Date: Fri, 19 Jun 2009 11:08:07 +0200 Subject: mxc pwm: add mx25 support Signed-off-by: Sascha Hauer --- arch/arm/plat-mxc/pwm.c | 17 +++++++++++++---- 1 file changed, 13 insertions(+), 4 deletions(-) diff --git a/arch/arm/plat-mxc/pwm.c b/arch/arm/plat-mxc/pwm.c index 42dd17b89ff..5cdbd605ac0 100644 --- a/arch/arm/plat-mxc/pwm.c +++ b/arch/arm/plat-mxc/pwm.c @@ -32,6 +32,7 @@ #define MX3_PWMPR 0x10 /* PWM Period Register */ #define MX3_PWMCR_PRESCALER(x) (((x - 1) & 0xFFF) << 4) #define MX3_PWMCR_CLKSRC_IPG_HIGH (2 << 16) +#define MX3_PWMCR_CLKSRC_IPG (1 << 16) #define MX3_PWMCR_EN (1 << 0) @@ -55,9 +56,11 @@ int pwm_config(struct pwm_device *pwm, int duty_ns, int period_ns) if (pwm == NULL || period_ns == 0 || duty_ns > period_ns) return -EINVAL; - if (cpu_is_mx27() || cpu_is_mx3()) { + if (cpu_is_mx27() || cpu_is_mx3() || cpu_is_mx25()) { unsigned long long c; unsigned long period_cycles, duty_cycles, prescale; + u32 cr; + c = clk_get_rate(pwm->clk); c = c * period_ns; do_div(c, 1000000000); @@ -72,9 +75,15 @@ int pwm_config(struct pwm_device *pwm, int duty_ns, int period_ns) writel(duty_cycles, pwm->mmio_base + MX3_PWMSAR); writel(period_cycles, pwm->mmio_base + MX3_PWMPR); - writel(MX3_PWMCR_PRESCALER(prescale) | - MX3_PWMCR_CLKSRC_IPG_HIGH | MX3_PWMCR_EN, - pwm->mmio_base + MX3_PWMCR); + + cr = MX3_PWMCR_PRESCALER(prescale) | MX3_PWMCR_EN; + + if (cpu_is_mx25()) + cr |= MX3_PWMCR_CLKSRC_IPG; + else + cr |= MX3_PWMCR_CLKSRC_IPG_HIGH; + + writel(cr, pwm->mmio_base + MX3_PWMCR); } else if (cpu_is_mx1() || cpu_is_mx21()) { /* The PWM subsystem allows for exact frequencies. However, * I cannot connect a scope on my device to the PWM line and -- cgit v1.2.3 From 8c25c36f33157a2e2a1fcd60b6dc00feace80631 Mon Sep 17 00:00:00 2001 From: Sascha Hauer Date: Thu, 4 Jun 2009 11:32:12 +0200 Subject: Add i.MX25 support Signed-off-by: Sascha Hauer --- arch/arm/Makefile | 1 + arch/arm/mach-mx25/Kconfig | 5 + arch/arm/mach-mx25/Makefile | 2 + arch/arm/mach-mx25/Makefile.boot | 3 + arch/arm/mach-mx25/clock.c | 219 +++++++++++++++ arch/arm/mach-mx25/devices.c | 402 +++++++++++++++++++++++++++ arch/arm/mach-mx25/devices.h | 19 ++ arch/arm/mach-mx25/mm.c | 76 +++++ arch/arm/plat-mxc/Kconfig | 8 + arch/arm/plat-mxc/gpio.c | 2 +- arch/arm/plat-mxc/include/mach/common.h | 3 + arch/arm/plat-mxc/include/mach/debug-macro.S | 9 + arch/arm/plat-mxc/include/mach/hardware.h | 4 + arch/arm/plat-mxc/include/mach/irqs.h | 2 + arch/arm/plat-mxc/include/mach/memory.h | 2 + arch/arm/plat-mxc/include/mach/mx25.h | 44 +++ arch/arm/plat-mxc/include/mach/mxc.h | 13 + arch/arm/plat-mxc/include/mach/timex.h | 2 + arch/arm/plat-mxc/include/mach/uncompress.h | 1 + 19 files changed, 816 insertions(+), 1 deletion(-) create mode 100644 arch/arm/mach-mx25/Kconfig create mode 100644 arch/arm/mach-mx25/Makefile create mode 100644 arch/arm/mach-mx25/Makefile.boot create mode 100644 arch/arm/mach-mx25/clock.c create mode 100644 arch/arm/mach-mx25/devices.c create mode 100644 arch/arm/mach-mx25/devices.h create mode 100644 arch/arm/mach-mx25/mm.c create mode 100644 arch/arm/plat-mxc/include/mach/mx25.h diff --git a/arch/arm/Makefile b/arch/arm/Makefile index c877d6df23d..95ba3c5ca14 100644 --- a/arch/arm/Makefile +++ b/arch/arm/Makefile @@ -135,6 +135,7 @@ machine-$(CONFIG_ARCH_MSM) := msm machine-$(CONFIG_ARCH_MV78XX0) := mv78xx0 machine-$(CONFIG_ARCH_MX1) := mx1 machine-$(CONFIG_ARCH_MX2) := mx2 +machine-$(CONFIG_ARCH_MX25) := mx25 machine-$(CONFIG_ARCH_MX3) := mx3 machine-$(CONFIG_ARCH_NETX) := netx machine-$(CONFIG_ARCH_NS9XXX) := ns9xxx diff --git a/arch/arm/mach-mx25/Kconfig b/arch/arm/mach-mx25/Kconfig new file mode 100644 index 00000000000..14c918bad52 --- /dev/null +++ b/arch/arm/mach-mx25/Kconfig @@ -0,0 +1,5 @@ +if ARCH_MX25 + +comment "MX25 platforms:" + +endif diff --git a/arch/arm/mach-mx25/Makefile b/arch/arm/mach-mx25/Makefile new file mode 100644 index 00000000000..5471086d5e1 --- /dev/null +++ b/arch/arm/mach-mx25/Makefile @@ -0,0 +1,2 @@ +obj-y := mm.o devices.o +obj-$(CONFIG_ARCH_MX25) += clock.o diff --git a/arch/arm/mach-mx25/Makefile.boot b/arch/arm/mach-mx25/Makefile.boot new file mode 100644 index 00000000000..e1dd366f836 --- /dev/null +++ b/arch/arm/mach-mx25/Makefile.boot @@ -0,0 +1,3 @@ + zreladdr-y := 0x80008000 +params_phys-y := 0x80000100 +initrd_phys-y := 0x80800000 diff --git a/arch/arm/mach-mx25/clock.c b/arch/arm/mach-mx25/clock.c new file mode 100644 index 00000000000..ef26951a527 --- /dev/null +++ b/arch/arm/mach-mx25/clock.c @@ -0,0 +1,219 @@ +/* + * Copyright (C) 2009 by Sascha Hauer, Pengutronix + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version 2 + * of the License, or (at your option) any later version. + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, + * MA 02110-1301, USA. + */ + +#include +#include +#include +#include +#include + +#include + +#include +#include +#include +#include + +#define CRM_BASE MX25_IO_ADDRESS(MX25_CRM_BASE_ADDR) + +#define CCM_MPCTL 0x00 +#define CCM_UPCTL 0x04 +#define CCM_CCTL 0x08 +#define CCM_CGCR0 0x0C +#define CCM_CGCR1 0x10 +#define CCM_CGCR2 0x14 +#define CCM_PCDR0 0x18 +#define CCM_PCDR1 0x1C +#define CCM_PCDR2 0x20 +#define CCM_PCDR3 0x24 +#define CCM_RCSR 0x28 +#define CCM_CRDR 0x2C +#define CCM_DCVR0 0x30 +#define CCM_DCVR1 0x34 +#define CCM_DCVR2 0x38 +#define CCM_DCVR3 0x3c +#define CCM_LTR0 0x40 +#define CCM_LTR1 0x44 +#define CCM_LTR2 0x48 +#define CCM_LTR3 0x4c + +static unsigned long get_rate_mpll(void) +{ + ulong mpctl = __raw_readl(CRM_BASE + CCM_MPCTL); + + return mxc_decode_pll(mpctl, 24000000); +} + +static unsigned long get_rate_upll(void) +{ + ulong mpctl = __raw_readl(CRM_BASE + CCM_UPCTL); + + return mxc_decode_pll(mpctl, 24000000); +} + +unsigned long get_rate_arm(struct clk *clk) +{ + unsigned long cctl = readl(CRM_BASE + CCM_CCTL); + unsigned long rate = get_rate_mpll(); + + if (cctl & (1 << 14)) + rate = (rate * 3) >> 1; + + return rate / ((cctl >> 30) + 1); +} + +static unsigned long get_rate_ahb(struct clk *clk) +{ + unsigned long cctl = readl(CRM_BASE + CCM_CCTL); + + return get_rate_arm(NULL) / (((cctl >> 28) & 0x3) + 1); +} + +static unsigned long get_rate_ipg(struct clk *clk) +{ + return get_rate_ahb(NULL) >> 1; +} + +static unsigned long get_rate_per(int per) +{ + unsigned long ofs = (per & 0x3) * 8; + unsigned long reg = per & ~0x3; + unsigned long val = (readl(CRM_BASE + CCM_PCDR0 + reg) >> ofs) & 0x3f; + unsigned long fref; + + if (readl(CRM_BASE + 0x64) & (1 << per)) + fref = get_rate_upll(); + else + fref = get_rate_ipg(NULL); + + return fref / (val + 1); +} + +static unsigned long get_rate_uart(struct clk *clk) +{ + return get_rate_per(15); +} + +static unsigned long get_rate_i2c(struct clk *clk) +{ + return get_rate_per(6); +} + +static unsigned long get_rate_nfc(struct clk *clk) +{ + return get_rate_per(8); +} + +static unsigned long get_rate_otg(struct clk *clk) +{ + return 48000000; /* FIXME */ +} + +static int clk_cgcr_enable(struct clk *clk) +{ + u32 reg; + + reg = __raw_readl(clk->enable_reg); + reg |= 1 << clk->enable_shift; + __raw_writel(reg, clk->enable_reg); + + return 0; +} + +static void clk_cgcr_disable(struct clk *clk) +{ + u32 reg; + + reg = __raw_readl(clk->enable_reg); + reg &= ~(1 << clk->enable_shift); + __raw_writel(reg, clk->enable_reg); +} + +#define DEFINE_CLOCK(name, i, er, es, gr, sr) \ + static struct clk name = { \ + .id = i, \ + .enable_reg = CRM_BASE + er, \ + .enable_shift = es, \ + .get_rate = gr, \ + .set_rate = sr, \ + .enable = clk_cgcr_enable, \ + .disable = clk_cgcr_disable, \ + } + +DEFINE_CLOCK(gpt_clk, 0, CCM_CGCR0, 5, get_rate_ipg, NULL); +DEFINE_CLOCK(cspi1_clk, 0, CCM_CGCR1, 5, get_rate_ipg, NULL); +DEFINE_CLOCK(cspi2_clk, 0, CCM_CGCR1, 6, get_rate_ipg, NULL); +DEFINE_CLOCK(cspi3_clk, 0, CCM_CGCR1, 7, get_rate_ipg, NULL); +DEFINE_CLOCK(uart1_clk, 0, CCM_CGCR2, 14, get_rate_uart, NULL); +DEFINE_CLOCK(uart2_clk, 0, CCM_CGCR2, 15, get_rate_uart, NULL); +DEFINE_CLOCK(uart3_clk, 0, CCM_CGCR2, 16, get_rate_uart, NULL); +DEFINE_CLOCK(uart4_clk, 0, CCM_CGCR2, 17, get_rate_uart, NULL); +DEFINE_CLOCK(uart5_clk, 0, CCM_CGCR2, 18, get_rate_uart, NULL); +DEFINE_CLOCK(nfc_clk, 0, CCM_CGCR0, 8, get_rate_nfc, NULL); +DEFINE_CLOCK(usbotg_clk, 0, CCM_CGCR0, 28, get_rate_otg, NULL); +DEFINE_CLOCK(pwm1_clk, 0, CCM_CGCR1, 31, get_rate_ipg, NULL); +DEFINE_CLOCK(pwm2_clk, 0, CCM_CGCR2, 0, get_rate_ipg, NULL); +DEFINE_CLOCK(pwm3_clk, 0, CCM_CGCR2, 1, get_rate_ipg, NULL); +DEFINE_CLOCK(pwm4_clk, 0, CCM_CGCR2, 2, get_rate_ipg, NULL); +DEFINE_CLOCK(kpp_clk, 0, CCM_CGCR1, 28, get_rate_ipg, NULL); +DEFINE_CLOCK(tsc_clk, 0, CCM_CGCR2, 13, get_rate_ipg, NULL); +DEFINE_CLOCK(i2c_clk, 0, CCM_CGCR0, 6, get_rate_i2c, NULL); + +#define _REGISTER_CLOCK(d, n, c) \ + { \ + .dev_id = d, \ + .con_id = n, \ + .clk = &c, \ + }, + +static struct clk_lookup lookups[] = { + _REGISTER_CLOCK("imx-uart.0", NULL, uart1_clk) + _REGISTER_CLOCK("imx-uart.1", NULL, uart2_clk) + _REGISTER_CLOCK("imx-uart.2", NULL, uart3_clk) + _REGISTER_CLOCK("imx-uart.3", NULL, uart4_clk) + _REGISTER_CLOCK("imx-uart.4", NULL, uart5_clk) + _REGISTER_CLOCK("mxc-ehci.0", "usb", usbotg_clk) + _REGISTER_CLOCK("mxc-ehci.1", "usb", usbotg_clk) + _REGISTER_CLOCK("mxc-ehci.2", "usb", usbotg_clk) + _REGISTER_CLOCK("fsl-usb2-udc", "usb", usbotg_clk) + _REGISTER_CLOCK("mxc_nand.0", NULL, nfc_clk) + _REGISTER_CLOCK("spi_imx.0", NULL, cspi1_clk) + _REGISTER_CLOCK("spi_imx.1", NULL, cspi2_clk) + _REGISTER_CLOCK("spi_imx.2", NULL, cspi3_clk) + _REGISTER_CLOCK("mxc_pwm.0", NULL, pwm1_clk) + _REGISTER_CLOCK("mxc_pwm.1", NULL, pwm2_clk) + _REGISTER_CLOCK("mxc_pwm.2", NULL, pwm3_clk) + _REGISTER_CLOCK("mxc_pwm.3", NULL, pwm4_clk) + _REGISTER_CLOCK("mxc-keypad", NULL, kpp_clk) + _REGISTER_CLOCK("mx25-adc", NULL, tsc_clk) + _REGISTER_CLOCK("imx-i2c.0", NULL, i2c_clk) + _REGISTER_CLOCK("imx-i2c.1", NULL, i2c_clk) + _REGISTER_CLOCK("imx-i2c.2", NULL, i2c_clk) +}; + +int __init mx25_clocks_init(unsigned long fref) +{ + int i; + + for (i = 0; i < ARRAY_SIZE(lookups); i++) + clkdev_add(&lookups[i]); + + mxc_timer_init(&gpt_clk, MX25_IO_ADDRESS(MX25_GPT1_BASE_ADDR), 54); + + return 0; +} diff --git a/arch/arm/mach-mx25/devices.c b/arch/arm/mach-mx25/devices.c new file mode 100644 index 00000000000..eb12de1da42 --- /dev/null +++ b/arch/arm/mach-mx25/devices.c @@ -0,0 +1,402 @@ +#include +#include +#include +#include + +static struct resource uart0[] = { + { + .start = 0x43f90000, + .end = 0x43f93fff, + .flags = IORESOURCE_MEM, + }, { + .start = 45, + .end = 45, + .flags = IORESOURCE_IRQ, + }, +}; + +struct platform_device mxc_uart_device0 = { + .name = "imx-uart", + .id = 0, + .resource = uart0, + .num_resources = ARRAY_SIZE(uart0), +}; + +static struct resource uart1[] = { + { + .start = 0x43f94000, + .end = 0x43f97fff, + .flags = IORESOURCE_MEM, + }, { + .start = 32, + .end = 32, + .flags = IORESOURCE_IRQ, + }, +}; + +struct platform_device mxc_uart_device1 = { + .name = "imx-uart", + .id = 1, + .resource = uart1, + .num_resources = ARRAY_SIZE(uart1), +}; + +static struct resource uart2[] = { + { + .start = 0x5000c000, + .end = 0x5000ffff, + .flags = IORESOURCE_MEM, + }, { + .start = 18, + .end = 18, + .flags = IORESOURCE_IRQ, + }, +}; + +struct platform_device mxc_uart_device2 = { + .name = "imx-uart", + .id = 2, + .resource = uart2, + .num_resources = ARRAY_SIZE(uart2), +}; + +static struct resource uart3[] = { + { + .start = 0x50008000, + .end = 0x5000bfff, + .flags = IORESOURCE_MEM, + }, { + .start = 5, + .end = 5, + .flags = IORESOURCE_IRQ, + }, +}; + +struct platform_device mxc_uart_device3 = { + .name = "imx-uart", + .id = 3, + .resource = uart3, + .num_resources = ARRAY_SIZE(uart3), +}; + +static struct resource uart4[] = { + { + .start = 0x5002c000, + .end = 0x5002ffff, + .flags = IORESOURCE_MEM, + }, { + .start = 40, + .end = 40, + .flags = IORESOURCE_IRQ, + }, +}; + +struct platform_device mxc_uart_device4 = { + .name = "imx-uart", + .id = 4, + .resource = uart4, + .num_resources = ARRAY_SIZE(uart4), +}; + +#define MX25_OTG_BASE_ADDR 0x53FF4000 + +static u64 otg_dmamask = DMA_BIT_MASK(32); + +static struct resource mxc_otg_resources[] = { + { + .start = MX25_OTG_BASE_ADDR, + .end = MX25_OTG_BASE_ADDR + 0x1ff, + .flags = IORESOURCE_MEM, + }, { + .start = 37, + .end = 37, + .flags = IORESOURCE_IRQ, + }, +}; + +struct platform_device mxc_otg = { + .name = "mxc-ehci", + .id = 0, + .dev = { + .coherent_dma_mask = 0xffffffff, + .dma_mask = &otg_dmamask, + }, + .resource = mxc_otg_resources, + .num_resources = ARRAY_SIZE(mxc_otg_resources), +}; + +/* OTG gadget device */ +struct platform_device otg_udc_device = { + .name = "fsl-usb2-udc", + .id = -1, + .dev = { + .dma_mask = &otg_dmamask, + .coherent_dma_mask = 0xffffffff, + }, + .resource = mxc_otg_resources, + .num_resources = ARRAY_SIZE(mxc_otg_resources), +}; + +static u64 usbh2_dmamask = DMA_BIT_MASK(32); + +static struct resource mxc_usbh2_resources[] = { + { + .start = MX25_OTG_BASE_ADDR + 0x400, + .end = MX25_OTG_BASE_ADDR + 0x5ff, + .flags = IORESOURCE_MEM, + }, { + .start = 35, + .end = 35, + .flags = IORESOURCE_IRQ, + }, +}; + +struct platform_device mxc_usbh2 = { + .name = "mxc-ehci", + .id = 1, + .dev = { + .coherent_dma_mask = 0xffffffff, + .dma_mask = &usbh2_dmamask, + }, + .resource = mxc_usbh2_resources, + .num_resources = ARRAY_SIZE(mxc_usbh2_resources), +}; + +static struct resource mxc_spi_resources0[] = { + { + .start = 0x43fa4000, + .end = 0x43fa7fff, + .flags = IORESOURCE_MEM, + }, { + .start = 14, + .end = 14, + .flags = IORESOURCE_IRQ, + }, +}; + +struct platform_device mxc_spi_device0 = { + .name = "spi_imx", + .id = 0, + .num_resources = ARRAY_SIZE(mxc_spi_resources0), + .resource = mxc_spi_resources0, +}; + +static struct resource mxc_spi_resources1[] = { + { + .start = 0x50010000, + .end = 0x50013fff, + .flags = IORESOURCE_MEM, + }, { + .start = 13, + .end = 13, + .flags = IORESOURCE_IRQ, + }, +}; + +struct platform_device mxc_spi_device1 = { + .name = "spi_imx", + .id = 1, + .num_resources = ARRAY_SIZE(mxc_spi_resources1), + .resource = mxc_spi_resources1, +}; + +static struct resource mxc_spi_resources2[] = { + { + .start = 0x50004000, + .end = 0x50007fff, + .flags = IORESOURCE_MEM, + }, { + .start = 0, + .end = 0, + .flags = IORESOURCE_IRQ, + }, +}; + +struct platform_device mxc_spi_device2 = { + .name = "spi_imx", + .id = 2, + .num_resources = ARRAY_SIZE(mxc_spi_resources2), + .resource = mxc_spi_resources2, +}; + +static struct resource mxc_pwm_resources0[] = { + { + .start = 0x53fe0000, + .end = 0x53fe3fff, + .flags = IORESOURCE_MEM, + }, { + .start = 26, + .end = 26, + .flags = IORESOURCE_IRQ, + } +}; + +struct platform_device mxc_pwm_device0 = { + .name = "mxc_pwm", + .id = 0, + .num_resources = ARRAY_SIZE(mxc_pwm_resources0), + .resource = mxc_pwm_resources0, +}; + +static struct resource mxc_pwm_resources1[] = { + { + .start = 0x53fa0000, + .end = 0x53fa3fff, + .flags = IORESOURCE_MEM, + }, { + .start = 36, + .end = 36, + .flags = IORESOURCE_IRQ, + } +}; + +struct platform_device mxc_pwm_device1 = { + .name = "mxc_pwm", + .id = 1, + .num_resources = ARRAY_SIZE(mxc_pwm_resources1), + .resource = mxc_pwm_resources1, +}; + +static struct resource mxc_pwm_resources2[] = { + { + .start = 0x53fa8000, + .end = 0x53fabfff, + .flags = IORESOURCE_MEM, + }, { + .start = 41, + .end = 41, + .flags = IORESOURCE_IRQ, + } +}; + +struct platform_device mxc_pwm_device2 = { + .name = "mxc_pwm", + .id = 2, + .num_resources = ARRAY_SIZE(mxc_pwm_resources2), + .resource = mxc_pwm_resources2, +}; + +static struct resource mxc_keypad_resources[] = { + { + .start = 0x43fa8000, + .end = 0x43fabfff, + .flags = IORESOURCE_MEM, + }, { + .start = 24, + .end = 24, + .flags = IORESOURCE_IRQ, + } +}; + +struct platform_device mxc_keypad_device = { + .name = "mxc-keypad", + .id = -1, + .num_resources = ARRAY_SIZE(mxc_keypad_resources), + .resource = mxc_keypad_resources, +}; + +static struct resource mxc_pwm_resources3[] = { + { + .start = 0x53fc8000, + .end = 0x53fcbfff, + .flags = IORESOURCE_MEM, + }, { + .start = 42, + .end = 42, + .flags = IORESOURCE_IRQ, + } +}; + +struct platform_device mxc_pwm_device3 = { + .name = "mxc_pwm", + .id = 3, + .num_resources = ARRAY_SIZE(mxc_pwm_resources3), + .resource = mxc_pwm_resources3, +}; + +static struct resource mxc_i2c_1_resources[] = { + { + .start = 0x43f80000, + .end = 0x43f83fff, + .flags = IORESOURCE_MEM, + }, { + .start = 3, + .end = 3, + .flags = IORESOURCE_IRQ, + } +}; + +struct platform_device mxc_i2c_device0 = { + .name = "imx-i2c", + .id = 0, + .num_resources = ARRAY_SIZE(mxc_i2c_1_resources), + .resource = mxc_i2c_1_resources, +}; + +static struct resource mxc_i2c_2_resources[] = { + { + .start = 0x43f98000, + .end = 0x43f9bfff, + .flags = IORESOURCE_MEM, + }, { + .start = 4, + .end = 4, + .flags = IORESOURCE_IRQ, + } +}; + +struct platform_device mxc_i2c_device1 = { + .name = "imx-i2c", + .id = 1, + .num_resources = ARRAY_SIZE(mxc_i2c_2_resources), + .resource = mxc_i2c_2_resources, +}; + +static struct resource mxc_i2c_3_resources[] = { + { + .start = 0x43f84000, + .end = 0x43f87fff, + .flags = IORESOURCE_MEM, + }, { + .start = 10, + .end = 10, + .flags = IORESOURCE_IRQ, + } +}; + +struct platform_device mxc_i2c_device2 = { + .name = "imx-i2c", + .id = 2, + .num_resources = ARRAY_SIZE(mxc_i2c_3_resources), + .resource = mxc_i2c_3_resources, +}; + +static struct mxc_gpio_port imx_gpio_ports[] = { + { + .chip.label = "gpio-0", + .base = (void __iomem *)MX25_GPIO1_BASE_ADDR_VIRT, + .irq = 52, + .virtual_irq_start = MXC_GPIO_IRQ_START, + }, { + .chip.label = "gpio-1", + .base = (void __iomem *)MX25_GPIO2_BASE_ADDR_VIRT, + .irq = 51, + .virtual_irq_start = MXC_GPIO_IRQ_START + 32, + }, { + .chip.label = "gpio-2", + .base = (void __iomem *)MX25_GPIO3_BASE_ADDR_VIRT, + .irq = 16, + .virtual_irq_start = MXC_GPIO_IRQ_START + 64, + }, { + .chip.label = "gpio-3", + .base = (void __iomem *)MX25_GPIO4_BASE_ADDR_VIRT, + .irq = 23, + .virtual_irq_start = MXC_GPIO_IRQ_START + 96, + } +}; + +int __init mxc_register_gpios(void) +{ + return mxc_gpio_init(imx_gpio_ports, ARRAY_SIZE(imx_gpio_ports)); +} + diff --git a/arch/arm/mach-mx25/devices.h b/arch/arm/mach-mx25/devices.h new file mode 100644 index 00000000000..fe6bf88ad1d --- /dev/null +++ b/arch/arm/mach-mx25/devices.h @@ -0,0 +1,19 @@ +extern struct platform_device mxc_uart_device0; +extern struct platform_device mxc_uart_device1; +extern struct platform_device mxc_uart_device2; +extern struct platform_device mxc_uart_device3; +extern struct platform_device mxc_uart_device4; +extern struct platform_device mxc_otg; +extern struct platform_device otg_udc_device; +extern struct platform_device mxc_usbh2; +extern struct platform_device mxc_spi_device0; +extern struct platform_device mxc_spi_device1; +extern struct platform_device mxc_spi_device2; +extern struct platform_device mxc_pwm_device0; +extern struct platform_device mxc_pwm_device1; +extern struct platform_device mxc_pwm_device2; +extern struct platform_device mxc_pwm_device3; +extern struct platform_device mxc_keypad_device; +extern struct platform_device mxc_i2c_device0; +extern struct platform_device mxc_i2c_device1; +extern struct platform_device mxc_i2c_device2; diff --git a/arch/arm/mach-mx25/mm.c b/arch/arm/mach-mx25/mm.c new file mode 100644 index 00000000000..a7e587ff3e9 --- /dev/null +++ b/arch/arm/mach-mx25/mm.c @@ -0,0 +1,76 @@ +/* + * Copyright (C) 1999,2000 Arm Limited + * Copyright (C) 2000 Deep Blue Solutions Ltd + * Copyright (C) 2002 Shane Nay (shane@minirl.com) + * Copyright 2005-2007 Freescale Semiconductor, Inc. All Rights Reserved. + * - add MX31 specific definitions + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#include +#include +#include + +#include +#include + +#include +#include +#include +#include + +/* + * This table defines static virtual address mappings for I/O regions. + * These are the mappings common across all MX3 boards. + */ +static struct map_desc mxc_io_desc[] __initdata = { + { + .virtual = MX25_AVIC_BASE_ADDR_VIRT, + .pfn = __phys_to_pfn(MX25_AVIC_BASE_ADDR), + .length = MX25_AVIC_SIZE, + .type = MT_DEVICE_NONSHARED + }, { + .virtual = MX25_AIPS1_BASE_ADDR_VIRT, + .pfn = __phys_to_pfn(MX25_AIPS1_BASE_ADDR), + .length = MX25_AIPS1_SIZE, + .type = MT_DEVICE_NONSHARED + }, { + .virtual = MX25_AIPS2_BASE_ADDR_VIRT, + .pfn = __phys_to_pfn(MX25_AIPS2_BASE_ADDR), + .length = MX25_AIPS2_SIZE, + .type = MT_DEVICE_NONSHARED + }, +}; + +/* + * This function initializes the memory map. It is called during the + * system startup to create static physical to virtual memory mappings + * for the IO modules. + */ +void __init mx25_map_io(void) +{ + mxc_set_cpu_type(MXC_CPU_MX25); + mxc_iomux_v3_init(MX25_IO_ADDRESS(MX25_IOMUXC_BASE_ADDR)); + mxc_arch_reset_init(MX25_IO_ADDRESS(MX25_WDOG_BASE_ADDR)); + + iotable_init(mxc_io_desc, ARRAY_SIZE(mxc_io_desc)); +} + +void __init mx25_init_irq(void) +{ + mxc_init_irq((void __iomem *)MX25_AVIC_BASE_ADDR_VIRT); +} + diff --git a/arch/arm/plat-mxc/Kconfig b/arch/arm/plat-mxc/Kconfig index 0617c19f85c..e342a2e6160 100644 --- a/arch/arm/plat-mxc/Kconfig +++ b/arch/arm/plat-mxc/Kconfig @@ -20,6 +20,13 @@ config ARCH_MX2 help This enables support for systems based on the Freescale i.MX2 family +config ARCH_MX25 + bool "MX25-based" + select CPU_ARM926T + select COMMON_CLKDEV + help + This enables support for systems based on the Freescale i.MX25 family + config ARCH_MX3 bool "MX3-based" select CPU_V6 @@ -32,6 +39,7 @@ endchoice source "arch/arm/mach-mx1/Kconfig" source "arch/arm/mach-mx2/Kconfig" source "arch/arm/mach-mx3/Kconfig" +source "arch/arm/mach-mx25/Kconfig" endmenu diff --git a/arch/arm/plat-mxc/gpio.c b/arch/arm/plat-mxc/gpio.c index f0315edb3eb..cfc4a8b43e6 100644 --- a/arch/arm/plat-mxc/gpio.c +++ b/arch/arm/plat-mxc/gpio.c @@ -297,7 +297,7 @@ int __init mxc_gpio_init(struct mxc_gpio_port *port, int cnt) /* its a serious configuration bug when it fails */ BUG_ON( gpiochip_add(&port[i].chip) < 0 ); - if (cpu_is_mx1() || cpu_is_mx3()) { + if (cpu_is_mx1() || cpu_is_mx3() || cpu_is_mx25()) { /* setup one handler for each entry */ set_irq_chained_handler(port[i].irq, mx3_gpio_irq_handler); set_irq_data(port[i].irq, &port[i]); diff --git a/arch/arm/plat-mxc/include/mach/common.h b/arch/arm/plat-mxc/include/mach/common.h index cd8f215c1ad..4e7af741239 100644 --- a/arch/arm/plat-mxc/include/mach/common.h +++ b/arch/arm/plat-mxc/include/mach/common.h @@ -16,18 +16,21 @@ struct clk; extern void mx1_map_io(void); extern void mx21_map_io(void); +extern void mx25_map_io(void); extern void mx27_map_io(void); extern void mx31_map_io(void); extern void mx35_map_io(void); extern void mxc_init_irq(void __iomem *); extern void mx1_init_irq(void); extern void mx21_init_irq(void); +extern void mx25_init_irq(void); extern void mx27_init_irq(void); extern void mx31_init_irq(void); extern void mx35_init_irq(void); extern void mxc_timer_init(struct clk *timer_clk, void __iomem *, int); extern int mx1_clocks_init(unsigned long fref); extern int mx21_clocks_init(unsigned long lref, unsigned long fref); +extern int mx25_clocks_init(unsigned long fref); extern int mx27_clocks_init(unsigned long fref); extern int mx31_clocks_init(unsigned long fref); extern int mx35_clocks_init(void); diff --git a/arch/arm/plat-mxc/include/mach/debug-macro.S b/arch/arm/plat-mxc/include/mach/debug-macro.S index 4f85acd74af..bf683de56b7 100644 --- a/arch/arm/plat-mxc/include/mach/debug-macro.S +++ b/arch/arm/plat-mxc/include/mach/debug-macro.S @@ -17,6 +17,15 @@ #define UART_VADDR IO_ADDRESS(UART1_BASE_ADDR) #endif +#ifdef CONFIG_ARCH_MX25 +#ifdef UART_PADDR +#error "CONFIG_DEBUG_LL is incompatible with multiple archs" +#endif +#include +#define UART_PADDR UART1_BASE_ADDR +#define UART_VADDR MX25_AIPS1_IO_ADDRESS(UART1_BASE_ADDR) +#endif + #ifdef CONFIG_ARCH_MX2 #ifdef UART_PADDR #error "CONFIG_DEBUG_LL is incompatible with multiple archs" diff --git a/arch/arm/plat-mxc/include/mach/hardware.h b/arch/arm/plat-mxc/include/mach/hardware.h index 42e4ee37ca1..569af3239c3 100644 --- a/arch/arm/plat-mxc/include/mach/hardware.h +++ b/arch/arm/plat-mxc/include/mach/hardware.h @@ -42,6 +42,10 @@ # include #endif +#ifdef CONFIG_ARCH_MX25 +# include +#endif + #include #endif /* __ASM_ARCH_MXC_HARDWARE_H__ */ diff --git a/arch/arm/plat-mxc/include/mach/irqs.h b/arch/arm/plat-mxc/include/mach/irqs.h index 518a36504b8..f39e016c1cc 100644 --- a/arch/arm/plat-mxc/include/mach/irqs.h +++ b/arch/arm/plat-mxc/include/mach/irqs.h @@ -24,6 +24,8 @@ #define MXC_GPIO_IRQS (32 * 6) #elif defined CONFIG_ARCH_MX3 #define MXC_GPIO_IRQS (32 * 3) +#elif defined CONFIG_ARCH_MX25 +#define MXC_GPIO_IRQS (32 * 4) #endif /* diff --git a/arch/arm/plat-mxc/include/mach/memory.h b/arch/arm/plat-mxc/include/mach/memory.h index 6065e00176e..42db7394111 100644 --- a/arch/arm/plat-mxc/include/mach/memory.h +++ b/arch/arm/plat-mxc/include/mach/memory.h @@ -22,6 +22,8 @@ #endif #elif defined CONFIG_ARCH_MX3 #define PHYS_OFFSET UL(0x80000000) +#elif defined CONFIG_ARCH_MX25 +#define PHYS_OFFSET UL(0x80000000) #endif #if defined(CONFIG_MX1_VIDEO) diff --git a/arch/arm/plat-mxc/include/mach/mx25.h b/arch/arm/plat-mxc/include/mach/mx25.h new file mode 100644 index 00000000000..ec64bd9a8ab --- /dev/null +++ b/arch/arm/plat-mxc/include/mach/mx25.h @@ -0,0 +1,44 @@ +#ifndef __MACH_MX25_H__ +#define __MACH_MX25_H__ + +#define MX25_AIPS1_BASE_ADDR 0x43F00000 +#define MX25_AIPS1_BASE_ADDR_VIRT 0xFC000000 +#define MX25_AIPS1_SIZE SZ_1M +#define MX25_AIPS2_BASE_ADDR 0x53F00000 +#define MX25_AIPS2_BASE_ADDR_VIRT 0xFC200000 +#define MX25_AIPS2_SIZE SZ_1M +#define MX25_AVIC_BASE_ADDR 0x68000000 +#define MX25_AVIC_BASE_ADDR_VIRT 0xFC400000 +#define MX25_AVIC_SIZE SZ_1M + +#define MX25_IOMUXC_BASE_ADDR (MX25_AIPS1_BASE_ADDR + 0xac000) + +#define MX25_CRM_BASE_ADDR (MX25_AIPS2_BASE_ADDR + 0x80000) +#define MX25_GPT1_BASE_ADDR (MX25_AIPS2_BASE_ADDR + 0x90000) +#define MX25_WDOG_BASE_ADDR (MX25_AIPS2_BASE_ADDR + 0xdc000) + +#define MX25_GPIO1_BASE_ADDR_VIRT (MX25_AIPS2_BASE_ADDR_VIRT + 0xcc000) +#define MX25_GPIO2_BASE_ADDR_VIRT (MX25_AIPS2_BASE_ADDR_VIRT + 0xd0000) +#define MX25_GPIO3_BASE_ADDR_VIRT (MX25_AIPS2_BASE_ADDR_VIRT + 0xa4000) +#define MX25_GPIO4_BASE_ADDR_VIRT (MX25_AIPS2_BASE_ADDR_VIRT + 0x9c000) + +#define MX25_AIPS1_IO_ADDRESS(x) \ + (((x) - MX25_AIPS1_BASE_ADDR) + MX25_AIPS1_BASE_ADDR_VIRT) +#define MX25_AIPS2_IO_ADDRESS(x) \ + (((x) - MX25_AIPS2_BASE_ADDR) + MX25_AIPS2_BASE_ADDR_VIRT) +#define MX25_AVIC_IO_ADDRESS(x) \ + (((x) - MX25_AVIC_BASE_ADDR) + MX25_AVIC_BASE_ADDR_VIRT) + +#define __in_range(addr, name) ((addr) >= name##_BASE_ADDR && (addr) < name##_BASE_ADDR + name##_SIZE) + +#define MX25_IO_ADDRESS(x) \ + (void __force __iomem *) \ + (__in_range(x, MX25_AIPS1) ? MX25_AIPS1_IO_ADDRESS(x) : \ + __in_range(x, MX25_AIPS2) ? MX25_AIPS2_IO_ADDRESS(x) : \ + __in_range(x, MX25_AVIC) ? MX25_AVIC_IO_ADDRESS(x) : \ + 0xDEADBEEF) + +#define UART1_BASE_ADDR 0x43f90000 +#define UART2_BASE_ADDR 0x43f94000 + +#endif /* __MACH_MX25_H__ */ diff --git a/arch/arm/plat-mxc/include/mach/mxc.h b/arch/arm/plat-mxc/include/mach/mxc.h index 5fa2a07f4ea..882b816729b 100644 --- a/arch/arm/plat-mxc/include/mach/mxc.h +++ b/arch/arm/plat-mxc/include/mach/mxc.h @@ -26,6 +26,7 @@ #define MXC_CPU_MX1 1 #define MXC_CPU_MX21 21 +#define MXC_CPU_MX25 25 #define MXC_CPU_MX27 27 #define MXC_CPU_MX31 31 #define MXC_CPU_MX35 35 @@ -58,6 +59,18 @@ extern unsigned int __mxc_cpu_type; # define cpu_is_mx21() (0) #endif +#ifdef CONFIG_ARCH_MX25 +# ifdef mxc_cpu_type +# undef mxc_cpu_type +# define mxc_cpu_type __mxc_cpu_type +# else +# define mxc_cpu_type MXC_CPU_MX25 +# endif +# define cpu_is_mx25() (mxc_cpu_type == MXC_CPU_MX25) +#else +# define cpu_is_mx25() (0) +#endif + #ifdef CONFIG_MACH_MX27 # ifdef mxc_cpu_type # undef mxc_cpu_type diff --git a/arch/arm/plat-mxc/include/mach/timex.h b/arch/arm/plat-mxc/include/mach/timex.h index 07b4a73c9d2..0707b7d5b5c 100644 --- a/arch/arm/plat-mxc/include/mach/timex.h +++ b/arch/arm/plat-mxc/include/mach/timex.h @@ -26,6 +26,8 @@ #define CLOCK_TICK_RATE 13300000 #elif defined CONFIG_ARCH_MX3 #define CLOCK_TICK_RATE 16625000 +#elif defined CONFIG_ARCH_MX25 +#define CLOCK_TICK_RATE 16000000 #endif #endif /* __ASM_ARCH_MXC_TIMEX_H__ */ diff --git a/arch/arm/plat-mxc/include/mach/uncompress.h b/arch/arm/plat-mxc/include/mach/uncompress.h index 98c8a60214d..b6650e705e3 100644 --- a/arch/arm/plat-mxc/include/mach/uncompress.h +++ b/arch/arm/plat-mxc/include/mach/uncompress.h @@ -63,6 +63,7 @@ static void putc(int ch) #define flush() do { } while (0) #define MX1_UART1_BASE_ADDR 0x00206000 +#define MX25_UART1_BASE_ADDR 0x43f90000 #define MX2X_UART1_BASE_ADDR 0x1000a000 #define MX3X_UART1_BASE_ADDR 0x43F90000 -- cgit v1.2.3 From 635baf6b40ebaef683abf87d677467cba71a0d50 Mon Sep 17 00:00:00 2001 From: Sascha Hauer Date: Thu, 4 Jun 2009 11:32:46 +0200 Subject: Freescale i.MX25 PDK (3ds) board support Signed-off-by: Sascha Hauer --- arch/arm/mach-mx25/Kconfig | 4 ++ arch/arm/mach-mx25/Makefile | 1 + arch/arm/mach-mx25/mx25pdk.c | 58 +++++++++++++++++++++++++++++ arch/arm/plat-mxc/include/mach/uncompress.h | 3 ++ 4 files changed, 66 insertions(+) create mode 100644 arch/arm/mach-mx25/mx25pdk.c diff --git a/arch/arm/mach-mx25/Kconfig b/arch/arm/mach-mx25/Kconfig index 14c918bad52..cc28f56eae8 100644 --- a/arch/arm/mach-mx25/Kconfig +++ b/arch/arm/mach-mx25/Kconfig @@ -2,4 +2,8 @@ if ARCH_MX25 comment "MX25 platforms:" +config MACH_MX25_3DS + select ARCH_MXC_IOMUX_V3 + bool "Support MX25PDK (3DS) Platform" + endif diff --git a/arch/arm/mach-mx25/Makefile b/arch/arm/mach-mx25/Makefile index 5471086d5e1..fe23836a9f3 100644 --- a/arch/arm/mach-mx25/Makefile +++ b/arch/arm/mach-mx25/Makefile @@ -1,2 +1,3 @@ obj-y := mm.o devices.o obj-$(CONFIG_ARCH_MX25) += clock.o +obj-$(CONFIG_MACH_MX25_3DS) += mx25pdk.o diff --git a/arch/arm/mach-mx25/mx25pdk.c b/arch/arm/mach-mx25/mx25pdk.c new file mode 100644 index 00000000000..92aa4fd19d9 --- /dev/null +++ b/arch/arm/mach-mx25/mx25pdk.c @@ -0,0 +1,58 @@ +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include "devices.h" +#include + +static struct imxuart_platform_data uart_pdata = { + .flags = IMXUART_HAVE_RTSCTS, +}; + +static struct mxc_nand_platform_data nand_board_info = { + .width = 1, + .hw_ecc = 1, +}; + +static void __init mx25pdk_init(void) +{ + mxc_register_device(&mxc_uart_device0, &uart_pdata); + mxc_register_device(&mxc_usbh2, NULL); + mxc_register_device(&mxc_nand_device, &nand_board_info); +} + + +static void __init mx25pdk_timer_init(void) +{ + mx25_clocks_init(26000000); +} + +static struct sys_timer mx25pdk_timer = { + .init = mx25pdk_timer_init, +}; + +MACHINE_START(MX25_3DS, "Freescale MX25PDK (3DS)") + /* Maintainer: Freescale Semiconductor, Inc. */ + .phys_io = MX25_AIPS1_BASE_ADDR, + .io_pg_offst = ((MX25_AIPS1_BASE_ADDR_VIRT) >> 18) & 0xfffc, + .boot_params = PHYS_OFFSET + 0x100, + .map_io = mx25_map_io, + .init_irq = mx25_init_irq, + .init_machine = mx25pdk_init, + .timer = &mx25pdk_timer, +MACHINE_END + diff --git a/arch/arm/plat-mxc/include/mach/uncompress.h b/arch/arm/plat-mxc/include/mach/uncompress.h index b6650e705e3..1e24499f20b 100644 --- a/arch/arm/plat-mxc/include/mach/uncompress.h +++ b/arch/arm/plat-mxc/include/mach/uncompress.h @@ -74,6 +74,9 @@ static __inline__ void __arch_decomp_setup(unsigned long arch_id) case MACH_TYPE_SCB9328: uart_base = MX1_UART1_BASE_ADDR; break; + case MACH_TYPE_MX25_3DS: + uart_base = MX25_UART1_BASE_ADDR; + break; case MACH_TYPE_IMX27LITE: case MACH_TYPE_MX27_3DS: case MACH_TYPE_MX27ADS: -- cgit v1.2.3 From cf983c93aea2a6cd6de5b405b7506af7732f91d0 Mon Sep 17 00:00:00 2001 From: Sascha Hauer Date: Wed, 15 Jul 2009 09:31:15 +0200 Subject: fix mx35 wrong clock Signed-off-by: Sascha Hauer --- arch/arm/mach-mx3/clock-imx35.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm/mach-mx3/clock-imx35.c b/arch/arm/mach-mx3/clock-imx35.c index 4cf1849f552..1dbcdc07257 100644 --- a/arch/arm/mach-mx3/clock-imx35.c +++ b/arch/arm/mach-mx3/clock-imx35.c @@ -456,7 +456,7 @@ int __init mx35_clocks_init() __raw_writel((3 << 26) | ll, CCM_BASE + CCM_CGR2); __raw_writel(0, CCM_BASE + CCM_CGR3); - mxc_timer_init(&ipg_clk, IO_ADDRESS(GPT1_BASE_ADDR), MXC_INT_GPT); + mxc_timer_init(&gpt_clk, IO_ADDRESS(GPT1_BASE_ADDR), MXC_INT_GPT); return 0; } -- cgit v1.2.3 From 8e5be212cba6675dc363a224ce4a98bb07039b4b Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Lothar=20Wa=C3=9Fmann?= Date: Wed, 15 Jul 2009 15:19:34 +0200 Subject: i.MX25 iomux definitions (corrected version) Signed-off-by: Lothar Wassmann Signed-off-by: Sascha Hauer --- arch/arm/plat-mxc/include/mach/iomux-mx25.h | 517 ++++++++++++++++++++++++++++ arch/arm/plat-mxc/include/mach/iomux.h | 6 + 2 files changed, 523 insertions(+) create mode 100644 arch/arm/plat-mxc/include/mach/iomux-mx25.h diff --git a/arch/arm/plat-mxc/include/mach/iomux-mx25.h b/arch/arm/plat-mxc/include/mach/iomux-mx25.h new file mode 100644 index 00000000000..810c47f56e7 --- /dev/null +++ b/arch/arm/plat-mxc/include/mach/iomux-mx25.h @@ -0,0 +1,517 @@ +/* + * arch/arm/plat-mxc/include/mach/iomux-mx25.h + * + * Copyright (C) 2009 by Lothar Wassmann + * + * based on arch/arm/mach-mx25/mx25_pins.h + * Copyright 2008 Freescale Semiconductor, Inc. All Rights Reserved. + * and + * arch/arm/plat-mxc/include/mach/iomux-mx35.h + * Copyright (C, NO_PAD_CTRL) 2009 by Jan Weitzel Phytec Messtechnik GmbH + * + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 or later at the following locations: + * + * http://www.opensource.org/licenses/gpl-license.html + * http://www.gnu.org/copyleft/gpl.html + */ +#ifndef __IOMUX_MX25_H__ +#define __IOMUX_MX25_H__ + +#include + +#ifndef GPIO_PORTA +#error Please include mach/iomux.h +#endif + +/* + * + * @brief MX25 I/O Pin List + * + * @ingroup GPIO_MX25 + */ + +#ifndef __ASSEMBLY__ + +/* + * IOMUX/PAD Bit field definitions + */ + +#define MX25_PAD_A10__A10 IOMUX_PAD(0x000, 0x008, 0x00, 0, 0, NO_PAD_CTRL) +#define MX25_PAD_A10__GPIO_4_0 IOMUX_PAD(0x000, 0x008, 0x05, 0, 0, NO_PAD_CTRL) + +#define MX25_PAD_A13__A13 IOMUX_PAD(0x22C, 0x00c, 0x00, 0, 0, NO_PAD_CTRL) +#define MX25_PAD_A13__GPIO_4_1 IOMUX_PAD(0x22C, 0x00c, 0x05, 0, 0, NO_PAD_CTRL) + +#define MX25_PAD_A14__A14 IOMUX_PAD(0x230, 0x010, 0x10, 0, 0, NO_PAD_CTRL) +#define MX25_PAD_A14__GPIO_2_0 IOMUX_PAD(0x230, 0x010, 0x15, 0, 0, NO_PAD_CTRL) + +#define MX25_PAD_A15__A15 IOMUX_PAD(0x234, 0x014, 0x10, 0, 0, NO_PAD_CTRL) +#define MX25_PAD_A15__GPIO_2_1 IOMUX_PAD(0x234, 0x014, 0x15, 0, 0, NO_PAD_CTRL) + +#define MX25_PAD_A16__A16 IOMUX_PAD(0x000, 0x018, 0x10, 0, 0, NO_PAD_CTRL) +#define MX25_PAD_A16__GPIO_2_2 IOMUX_PAD(0x000, 0x018, 0x15, 0, 0, NO_PAD_CTRL) + +#define MX25_PAD_A17__A17 IOMUX_PAD(0x238, 0x01c, 0x10, 0, 0, NO_PAD_CTRL) +#define MX25_PAD_A17__GPIO_2_3 IOMUX_PAD(0x238, 0x01c, 0x15, 0, 0, NO_PAD_CTRL) + +#define MX25_PAD_A18__A18 IOMUX_PAD(0x23c, 0x020, 0x10, 0, 0, NO_PAD_CTRL) +#define MX25_PAD_A18__GPIO_2_4 IOMUX_PAD(0x23c, 0x020, 0x15, 0, 0, NO_PAD_CTRL) +#define MX25_PAD_A18__FEC_COL IOMUX_PAD(0x23c, 0x020, 0x17, 0x504, 0, NO_PAD_CTL) + +#define MX25_PAD_A19__A19 IOMUX_PAD(0x240, 0x024, 0x10, 0, 0, NO_PAD_CTRL) +#define MX25_PAD_A19__FEC_RX_ER IOMUX_PAD(0x240, 0x024, 0x17, 0x518, 0, NO_PAD_CTL) +#define MX25_PAD_A19__GPIO_2_5 IOMUX_PAD(0x240, 0x024, 0x15, 0, 0, NO_PAD_CTRL) + +#define MX25_PAD_A20__A20 IOMUX_PAD(0x244, 0x028, 0x10, 0, 0, NO_PAD_CTRL) +#define MX25_PAD_A20__GPIO_2_6 IOMUX_PAD(0x244, 0x028, 0x15, 0, 0, NO_PAD_CTRL) +#define MX25_PAD_A20__FEC_RDATA2 IOMUX_PAD(0x244, 0x028, 0x17, 0x50c, 0, NO_PAD_CTL) + +#define MX25_PAD_A21__A21 IOMUX_PAD(0x248, 0x02c, 0x10, 0, 0, NO_PAD_CTRL) +#define MX25_PAD_A21__GPIO_2_7 IOMUX_PAD(0x248, 0x02c, 0x15, 0, 0, NO_PAD_CTRL) +#define MX25_PAD_A21__FEC_RDATA3 IOMUX_PAD(0x248, 0x02c, 0x17, 0x510, 0, NO_PAD_CTL) + +#define MX25_PAD_A22__A22 IOMUX_PAD(0x000, 0x030, 0x10, 0, 0, NO_PAD_CTRL) +#define MX25_PAD_A22__GPIO_2_8 IOMUX_PAD(0x000, 0x030, 0x15, 0, 0, NO_PAD_CTRL) + +#define MX25_PAD_A23__A23 IOMUX_PAD(0x24c, 0x034, 0x10, 0, 0, NO_PAD_CTRL) +#define MX25_PAD_A23__GPIO_2_9 IOMUX_PAD(0x24c, 0x034, 0x15, 0, 0, NO_PAD_CTRL) + +#define MX25_PAD_A24__A24 IOMUX_PAD(0x250, 0x038, 0x10, 0, 0, NO_PAD_CTRL) +#define MX25_PAD_A24__GPIO_2_10 IOMUX_PAD(0x250, 0x038, 0x15, 0, 0, NO_PAD_CTRL) +#define MX25_PAD_A24__FEC_RX_CLK IOMUX_PAD(0x250, 0x038, 0x17, 0x514, 0, NO_PAD_CTL) + +#define MX25_PAD_A25__A25 IOMUX_PAD(0x254, 0x03c, 0x10, 0, 0, NO_PAD_CTRL) +#define MX25_PAD_A25__GPIO_2_11 IOMUX_PAD(0x254, 0x03c, 0x15, 0, 0, NO_PAD_CTRL) +#define MX25_PAD_A25__FEC_CRS IOMUX_PAD(0x254, 0x03c, 0x17, 0x508, 0, NO_PAD_CTL) + +#define MX25_PAD_EB0__EB0 IOMUX_PAD(0x258, 0x040, 0x10, 0, 0, NO_PAD_CTRL) +#define MX25_PAD_EB0__AUD4_TXD IOMUX_PAD(0x258, 0x040, 0x14, 0x464, 0, NO_PAD_CTRL) +#define MX25_PAD_EB0__GPIO_2_12 IOMUX_PAD(0x258, 0x040, 0x15, 0, 0, NO_PAD_CTRL) + +#define MX25_PAD_EB1__EB1 IOMUX_PAD(0x25c, 0x044, 0x10, 0, 0, NO_PAD_CTRL) +#define MX25_PAD_EB1__AUD4_RXD IOMUX_PAD(0x25c, 0x044, 0x14, 0x460, 0, NO_PAD_CTRL) +#define MX25_PAD_EB1__GPIO_2_13 IOMUX_PAD(0x25c, 0x044, 0x15, 0, 0, NO_PAD_CTRL) + +#define MX25_PAD_OE__OE IOMUX_PAD(0x260, 0x048, 0x10, 0, 0, NO_PAD_CTRL) +#define MX25_PAD_OE__AUD4_TXC IOMUX_PAD(0x260, 0x048, 0x14, 0, 0, NO_PAD_CTRL) +#define MX25_PAD_OE__GPIO_2_14 IOMUX_PAD(0x260, 0x048, 0x15, 0, 0, NO_PAD_CTRL) + +#define MX25_PAD_CS0__CS0 IOMUX_PAD(0x000, 0x04c, 0x00, 0, 0, NO_PAD_CTRL) +#define MX25_PAD_CS0__GPIO_4_2 IOMUX_PAD(0x000, 0x04c, 0x05, 0, 0, NO_PAD_CTRL) + +#define MX25_PAD_CS1__CS1 IOMUX_PAD(0x000, 0x050, 0x00, 0, 0, NO_PAD_CTRL) +#define MX25_PAD_CS1__GPIO_4_3 IOMUX_PAD(0x000, 0x050, 0x05, 0, 0, NO_PAD_CTRL) + +#define MX25_PAD_CS4__CS4 IOMUX_PAD(0x264, 0x054, 0x10, 0, 0, NO_PAD_CTRL) +#define MX25_PAD_CS4__UART5_CTS IOMUX_PAD(0x264, 0x054, 0x13, 0, 0, NO_PAD_CTRL) +#define MX25_PAD_CS4__GPIO_3_20 IOMUX_PAD(0x264, 0x054, 0x15, 0, 0, NO_PAD_CTRL) + +#define MX25_PAD_CS5__CS5 IOMUX_PAD(0x268, 0x058, 0x10, 0, 0, NO_PAD_CTRL) +#define MX25_PAD_CS5__UART5_RTS IOMUX_PAD(0x268, 0x058, 0x13, 0x574, 0, NO_PAD_CTRL) +#define MX25_PAD_CS5__GPIO_3_21 IOMUX_PAD(0x268, 0x058, 0x15, 0, 0, NO_PAD_CTRL) + +#define MX25_PAD_NF_CE0__NF_CE0 IOMUX_PAD(0x26c, 0x05c, 0x10, 0, 0, NO_PAD_CTL) +#define MX25_PAD_NF_CE0__GPIO_3_22 IOMUX_PAD(0x26c, 0x05c, 0x15, 0, 0, NO_PAD_CTRL) + +#define MX25_PAD_ECB__ECB IOMUX_PAD(0x270, 0x060, 0x10, 0, 0, NO_PAD_CTRL) +#define MX25_PAD_ECB__UART5_TXD_MUX IOMUX_PAD(0x270, 0x060, 0x13, 0, 0, NO_PAD_CTRL) +#define MX25_PAD_ECB__GPIO_3_23 IOMUX_PAD(0x270, 0x060, 0x15, 0, 0, NO_PAD_CTRL) + +#define MX25_PAD_LBA__LBA IOMUX_PAD(0x274, 0x064, 0x10, 0, 0, NO_PAD_CTRL) +#define MX25_PAD_LBA__UART5_RXD_MUX IOMUX_PAD(0x274, 0x064, 0x13, 0x578, 0, NO_PAD_CTRL) +#define MX25_PAD_LBA__GPIO_3_24 IOMUX_PAD(0x274, 0x064, 0x15, 0, 0, NO_PAD_CTRL) + +#define MX25_PAD_BCLK__BCLK IOMUX_PAD(0x000, 0x068, 0x00, 0, 0, NO_PAD_CTRL) +#define MX25_PAD_BCLK__GPIO_4_4 IOMUX_PAD(0x000, 0x068, 0x05, 0, 0, NO_PAD_CTRL) + +#define MX25_PAD_RW__RW IOMUX_PAD(0x278, 0x06c, 0x10, 0, 0, NO_PAD_CTRL) +#define MX25_PAD_RW__AUD4_TXFS IOMUX_PAD(0x278, 0x06c, 0x14, 0x474, 0, NO_PAD_CTRL) +#define MX25_PAD_RW__GPIO_3_25 IOMUX_PAD(0x278, 0x06c, 0x15, 0, 0, NO_PAD_CTRL) + +#define MX25_PAD_NFWE_B__NFWE_B IOMUX_PAD(0x000, 0x070, 0x10, 0, 0, NO_PAD_CTRL) +#define MX25_PAD_NFWE_B__GPIO_3_26 IOMUX_PAD(0x000, 0x070, 0x15, 0, 0, NO_PAD_CTRL) + +#define MX25_PAD_NFRE_B__NFRE_B IOMUX_PAD(0x000, 0x074, 0x10, 0, 0, NO_PAD_CTRL) +#define MX25_PAD_NFRE_B__GPIO_3_27 IOMUX_PAD(0x000, 0x074, 0x15, 0, 0, NO_PAD_CTRL) + +#define MX25_PAD_NFALE__NFALE IOMUX_PAD(0x000, 0x078, 0x10, 0, 0, NO_PAD_CTRL) +#define MX25_PAD_NFALE__GPIO_3_28 IOMUX_PAD(0x000, 0x078, 0x15, 0, 0, NO_PAD_CTRL) + +#define MX25_PAD_NFCLE__NFCLE IOMUX_PAD(0x000, 0x07c, 0x10, 0, 0, NO_PAD_CTRL) +#define MX25_PAD_NFCLE__GPIO_3_29 IOMUX_PAD(0x000, 0x07c, 0x15, 0, 0, NO_PAD_CTRL) + +#define MX25_PAD_NFWP_B__NFWP_B IOMUX_PAD(0x000, 0x080, 0x10, 0, 0, NO_PAD_CTRL) +#define MX25_PAD_NFWP_B__GPIO_3_30 IOMUX_PAD(0x000, 0x080, 0x15, 0, 0, NO_PAD_CTRL) + +#define MX25_PAD_NFRB__NFRB IOMUX_PAD(0x27c, 0x084, 0x10, 0, 0, PAD_CTL_PKE) +#define MX25_PAD_NFRB__GPIO_3_31 IOMUX_PAD(0x27c, 0x084, 0x15, 0, 0, NO_PAD_CTRL) + +#define MX25_PAD_D15__D15 IOMUX_PAD(0x280, 0x088, 0x00, 0, 0, NO_PAD_CTRL) +#define MX25_PAD_D15__LD16 IOMUX_PAD(0x280, 0x088, 0x01, 0, 0, NO_PAD_CTRL) +#define MX25_PAD_D15__GPIO_4_5 IOMUX_PAD(0x280, 0x088, 0x05, 0, 0, NO_PAD_CTRL) + +#define MX25_PAD_D14__D14 IOMUX_PAD(0x284, 0x08c, 0x00, 0, 0, NO_PAD_CTRL) +#define MX25_PAD_D14__LD17 IOMUX_PAD(0x284, 0x08c, 0x01, 0, 0, NO_PAD_CTRL) +#define MX25_PAD_D14__GPIO_4_6 IOMUX_PAD(0x284, 0x08c, 0x05, 0, 0, NO_PAD_CTRL) + +#define MX25_PAD_D13__D13 IOMUX_PAD(0x288, 0x090, 0x00, 0, 0, NO_PAD_CTRL) +#define MX25_PAD_D13__LD18 IOMUX_PAD(0x288, 0x090, 0x01, 0, 0, NO_PAD_CTRL) +#define MX25_PAD_D13__GPIO_4_7 IOMUX_PAD(0x288, 0x090, 0x05, 0, 0, NO_PAD_CTRL) + +#define MX25_PAD_D12__D12 IOMUX_PAD(0x28c, 0x094, 0x00, 0, 0, NO_PAD_CTRL) +#define MX25_PAD_D12__GPIO_4_8 IOMUX_PAD(0x28c, 0x094, 0x05, 0, 0, NO_PAD_CTRL) + +#define MX25_PAD_D11__D11 IOMUX_PAD(0x290, 0x098, 0x00, 0, 0, NO_PAD_CTRL) +#define MX25_PAD_D11__GPIO_4_9 IOMUX_PAD(0x290, 0x098, 0x05, 0, 0, NO_PAD_CTRL) + +#define MX25_PAD_D10__D10 IOMUX_PAD(0x294, 0x09c, 0x00, 0, 0, NO_PAD_CTRL) +#define MX25_PAD_D10__GPIO_4_10 IOMUX_PAD(0x294, 0x09c, 0x05, 0, 0, NO_PAD_CTRL) +#define MX25_PAD_D10__USBOTG_OC IOMUX_PAD(0x294, 0x09c, 0x06, 0x57c, 0, PAD_CTL_PUS_100K_UP) + +#define MX25_PAD_D9__D9 IOMUX_PAD(0x298, 0x0a0, 0x00, 0, 0, NO_PAD_CTRL) +#define MX25_PAD_D9__GPIO_4_11 IOMUX_PAD(0x298, 0x0a0, 0x05, 0, 0, NO_PAD_CTRL) +#define MX25_PAD_D9__USBH2_PWR IOMUX_PAD(0x298, 0x0a0, 0x06, 0, 0, PAD_CTL_PKE) + +#define MX25_PAD_D8__D8 IOMUX_PAD(0x29c, 0x0a4, 0x00, 0, 0, NO_PAD_CTRL) +#define MX25_PAD_D8__GPIO_4_12 IOMUX_PAD(0x29c, 0x0a4, 0x05, 0, 0, NO_PAD_CTRL) +#define MX25_PAD_D8__USBH2_OC IOMUX_PAD(0x29c, 0x0a4, 0x06, 0x580, 0, PAD_CTL_PUS_100K_UP) + +#define MX25_PAD_D7__D7 IOMUX_PAD(0x2a0, 0x0a8, 0x00, 0, 0, NO_PAD_CTRL) +#define MX25_PAD_D7__GPIO_4_13 IOMUX_PAD(0x2a0, 0x0a8, 0x05, 0, 0, NO_PAD_CTRL) + +#define MX25_PAD_D6__D6 IOMUX_PAD(0x2a4, 0x0ac, 0x00, 0, 0, NO_PAD_CTRL) +#define MX25_PAD_D6__GPIO_4_14 IOMUX_PAD(0x2a4, 0x0ac, 0x05, 0, 0, NO_PAD_CTRL) + +#define MX25_PAD_D5__D5 IOMUX_PAD(0x2a8, 0x0b0, 0x00, 0, 0, NO_PAD_CTRL) +#define MX25_PAD_D5__GPIO_4_15 IOMUX_PAD(0x2a8, 0x0b0, 0x05, 0, 0, NO_PAD_CTRL) + +#define MX25_PAD_D4__D4 IOMUX_PAD(0x2ac, 0x0b4, 0x00, 0, 0, NO_PAD_CTRL) +#define MX25_PAD_D4__GPIO_4_16 IOMUX_PAD(0x2ac, 0x0b4, 0x05, 0, 0, NO_PAD_CTRL) + +#define MX25_PAD_D3__D3 IOMUX_PAD(0x2b0, 0x0b8, 0x00, 0, 0, NO_PAD_CTRL) +#define MX25_PAD_D3__GPIO_4_17 IOMUX_PAD(0x2b0, 0x0b8, 0x05, 0, 0, NO_PAD_CTRL) + +#define MX25_PAD_D2__D2 IOMUX_PAD(0x2b4, 0x0bc, 0x00, 0, 0, NO_PAD_CTRL) +#define MX25_PAD_D2__GPIO_4_18 IOMUX_PAD(0x2b4, 0x0bc, 0x05, 0, 0, NO_PAD_CTRL) + +#define MX25_PAD_D1__D1 IOMUX_PAD(0x2b8, 0x0c0, 0x00, 0, 0, NO_PAD_CTRL) +#define MX25_PAD_D1__GPIO_4_19 IOMUX_PAD(0x2b8, 0x0c0, 0x05, 0, 0, NO_PAD_CTRL) + +#define MX25_PAD_D0__D0 IOMUX_PAD(0x2bc, 0x0c4, 0x00, 0, 0, NO_PAD_CTRL) +#define MX25_PAD_D0__GPIO_4_20 IOMUX_PAD(0x2bc, 0x0c4, 0x05, 0, 0, NO_PAD_CTRL) + +#define MX25_PAD_LD0__LD0 IOMUX_PAD(0x2c0, 0x0c8, 0x10, 0, 0, NO_PAD_CTRL) +#define MX25_PAD_LD0__CSI_D0 IOMUX_PAD(0x2c0, 0x0c8, 0x12, 0x488, 0, NO_PAD_CTRL) +#define MX25_PAD_LD0__GPIO_2_15 IOMUX_PAD(0x2c0, 0x0c8, 0x15, 0, 0, NO_PAD_CTRL) + +#define MX25_PAD_LD1__LD1 IOMUX_PAD(0x2c4, 0x0cc, 0x10, 0, 0, NO_PAD_CTRL) +#define MX25_PAD_LD1__CSI_D1 IOMUX_PAD(0x2c4, 0x0cc, 0x12, 0x48c, 0, NO_PAD_CTRL) +#define MX25_PAD_LD1__GPIO_2_16 IOMUX_PAD(0x2c4, 0x0cc, 0x15, 0, 0, NO_PAD_CTRL) + +#define MX25_PAD_LD2__LD2 IOMUX_PAD(0x2c8, 0x0d0, 0x10, 0, 0, NO_PAD_CTRL) +#define MX25_PAD_LD2__GPIO_2_17 IOMUX_PAD(0x2c8, 0x0d0, 0x15, 0, 0, NO_PAD_CTRL) + +#define MX25_PAD_LD3__LD3 IOMUX_PAD(0x2cc, 0x0d4, 0x10, 0, 0, NO_PAD_CTRL) +#define MX25_PAD_LD3__GPIO_2_18 IOMUX_PAD(0x2cc, 0x0d4, 0x15, 0, 0, NO_PAD_CTRL) + +#define MX25_PAD_LD4__LD4 IOMUX_PAD(0x2d0, 0x0d8, 0x10, 0, 0, NO_PAD_CTRL) +#define MX25_PAD_LD4__GPIO_2_19 IOMUX_PAD(0x2d0, 0x0d8, 0x15, 0, 0, NO_PAD_CTRL) + +#define MX25_PAD_LD5__LD5 IOMUX_PAD(0x2d4, 0x0dc, 0x10, 0, 0, NO_PAD_CTRL) +#define MX25_PAD_LD5__GPIO_1_19 IOMUX_PAD(0x2d4, 0x0dc, 0x15, 0, 0, NO_PAD_CTRL) + +#define MX25_PAD_LD6__LD6 IOMUX_PAD(0x2d8, 0x0e0, 0x10, 0, 0, NO_PAD_CTRL) +#define MX25_PAD_LD6__GPIO_1_20 IOMUX_PAD(0x2d8, 0x0e0, 0x15, 0, 0, NO_PAD_CTRL) + +#define MX25_PAD_LD7__LD7 IOMUX_PAD(0x2dc, 0x0e4, 0x10, 0, 0, NO_PAD_CTRL) +#define MX25_PAD_LD7__GPIO_1_21 IOMUX_PAD(0x2dc, 0x0e4, 0x15, 0, 0, NO_PAD_CTRL) + +#define MX25_PAD_LD8__LD8 IOMUX_PAD(0x2e0, 0x0e8, 0x10, 0, 0, NO_PAD_CTRL) +#define MX25_PAD_LD8__FEC_TX_ERR IOMUX_PAD(0x2e0, 0x0e8, 0x15, 0, 0, NO_PAD_CTL) + +#define MX25_PAD_LD9__LD9 IOMUX_PAD(0x2e4, 0x0ec, 0x10, 0, 0, NO_PAD_CTRL) +#define MX25_PAD_LD9__FEC_COL IOMUX_PAD(0x2e4, 0x0ec, 0x15, 0x504, 1, NO_PAD_CTL) + +#define MX25_PAD_LD10__LD10 IOMUX_PAD(0x2e8, 0x0f0, 0x10, 0, 0, NO_PAD_CTRL) +#define MX25_PAD_LD10__FEC_RX_ER IOMUX_PAD(0x2e8, 0x0f0, 0x15, 0x518, 1, NO_PAD_CTL) + +#define MX25_PAD_LD11__LD11 IOMUX_PAD(0x2ec, 0x0f4, 0x10, 0, 0, NO_PAD_CTRL) +#define MX25_PAD_LD11__FEC_RDATA2 IOMUX_PAD(0x2ec, 0x0f4, 0x15, 0x50c, 1, NO_PAD_CTL) + +#define MX25_PAD_LD12__LD12 IOMUX_PAD(0x2f0, 0x0f8, 0x10, 0, 0, NO_PAD_CTRL) +#define MX25_PAD_LD12__FEC_RDATA3 IOMUX_PAD(0x2f0, 0x0f8, 0x15, 0x510, 1, NO_PAD_CTL) + +#define MX25_PAD_LD13__LD13 IOMUX_PAD(0x2f4, 0x0fc, 0x10, 0, 0, NO_PAD_CTRL) +#define MX25_PAD_LD13__FEC_TDATA2 IOMUX_PAD(0x2f4, 0x0fc, 0x15, 0, 0, NO_PAD_CTL) + +#define MX25_PAD_LD14__LD14 IOMUX_PAD(0x2f8, 0x100, 0x10, 0, 0, NO_PAD_CTRL) +#define MX25_PAD_LD14__FEC_TDATA3 IOMUX_PAD(0x2f8, 0x100, 0x15, 0, 0, NO_PAD_CTL) + +#define MX25_PAD_LD15__LD15 IOMUX_PAD(0x2fc, 0x104, 0x10, 0, 0, NO_PAD_CTRL) +#define MX25_PAD_LD15__FEC_RX_CLK IOMUX_PAD(0x2fc, 0x104, 0x15, 0x514, 1, NO_PAD_CTL) + +#define MX25_PAD_HSYNC__HSYNC IOMUX_PAD(0x300, 0x108, 0x10, 0, 0, NO_PAD_CTRL) +#define MX25_PAD_HSYNC__GPIO_1_22 IOMUX_PAD(0x300, 0x108, 0x15, 0, 0, NO_PAD_CTRL) + +#define MX25_PAD_VSYNC__VSYNC IOMUX_PAD(0x304, 0x10c, 0x10, 0, 0, NO_PAD_CTRL) +#define MX25_PAD_VSYNC__GPIO_1_23 IOMUX_PAD(0x304, 0x10c, 0x15, 0, 0, NO_PAD_CTRL) + +#define MX25_PAD_LSCLK__LSCLK IOMUX_PAD(0x308, 0x110, 0x10, 0, 0, NO_PAD_CTRL) +#define MX25_PAD_LSCLK__GPIO_1_24 IOMUX_PAD(0x308, 0x110, 0x15, 0, 0, NO_PAD_CTRL) + +#define MX25_PAD_OE_ACD__OE_ACD IOMUX_PAD(0x30c, 0x114, 0x10, 0, 0, NO_PAD_CTRL) +#define MX25_PAD_OE_ACD__GPIO_1_25 IOMUX_PAD(0x30c, 0x114, 0x15, 0, 0, NO_PAD_CTRL) + +#define MX25_PAD_CONTRAST__CONTRAST IOMUX_PAD(0x310, 0x118, 0x10, 0, 0, NO_PAD_CTRL) +#define MX25_PAD_CONTRAST__FEC_CRS IOMUX_PAD(0x310, 0x118, 0x15, 0x508, 1, NO_PAD_CTL) + +#define MX25_PAD_PWM__PWM IOMUX_PAD(0x314, 0x11c, 0x10, 0, 0, NO_PAD_CTRL) +#define MX25_PAD_PWM__GPIO_1_26 IOMUX_PAD(0x314, 0x11c, 0x15, 0, 0, NO_PAD_CTRL) +#define MX25_PAD_PWM__USBH2_OC IOMUX_PAD(0x314, 0x11c, 0x16, 0x580, 1, PAD_CTL_PUS_100K_UP) + +#define MX25_PAD_CSI_D2__CSI_D2 IOMUX_PAD(0x318, 0x120, 0x10, 0, 0, NO_PAD_CTRL) +#define MX25_PAD_CSI_D2__UART5_RXD_MUX IOMUX_PAD(0x318, 0x120, 0x11, 0x578, 1, NO_PAD_CTRL) +#define MX25_PAD_CSI_D2__GPIO_1_27 IOMUX_PAD(0x318, 0x120, 0x15, 0, 0, NO_PAD_CTRL) + +#define MX25_PAD_CSI_D3__CSI_D3 IOMUX_PAD(0x31c, 0x124, 0x10, 0, 0, NO_PAD_CTRL) +#define MX25_PAD_CSI_D3__GPIO_1_28 IOMUX_PAD(0x31c, 0x124, 0x15, 0, 0, NO_PAD_CTRL) + +#define MX25_PAD_CSI_D4__CSI_D4 IOMUX_PAD(0x320, 0x128, 0x10, 0, 0, NO_PAD_CTRL) +#define MX25_PAD_CSI_D4__UART5_RTS IOMUX_PAD(0x320, 0x128, 0x11, 0x574, 1, NO_PAD_CTRL) +#define MX25_PAD_CSI_D4__GPIO_1_29 IOMUX_PAD(0x320, 0x128, 0x15, 0, 0, NO_PAD_CTRL) + +#define MX25_PAD_CSI_D5__CSI_D5 IOMUX_PAD(0x324, 0x12c, 0x10, 0, 0, NO_PAD_CTRL) +#define MX25_PAD_CSI_D5__GPIO_1_30 IOMUX_PAD(0x324, 0x12c, 0x15, 0, 0, NO_PAD_CTRL) + +#define MX25_PAD_CSI_D6__CSI_D6 IOMUX_PAD(0x328, 0x130, 0x10, 0, 0, NO_PAD_CTRL) +#define MX25_PAD_CSI_D6__GPIO_1_31 IOMUX_PAD(0x328, 0x130, 0x15, 0, 0, NO_PAD_CTRL) + +#define MX25_PAD_CSI_D7__CSI_D7 IOMUX_PAD(0x32c, 0x134, 0x10, 0, 0, NO_PAD_CTRL) +#define MX25_PAD_CSI_D7__GPIO_1_6 IOMUX_PAD(0x32c, 0x134, 0x15, 0, 0, NO_PAD_CTRL) + +#define MX25_PAD_CSI_D8__CSI_D8 IOMUX_PAD(0x330, 0x138, 0x10, 0, 0, NO_PAD_CTRL) +#define MX25_PAD_CSI_D8__GPIO_1_7 IOMUX_PAD(0x330, 0x138, 0x15, 0, 0, NO_PAD_CTRL) + +#define MX25_PAD_CSI_D9__CSI_D9 IOMUX_PAD(0x334, 0x13c, 0x10, 0, 0, NO_PAD_CTRL) +#define MX25_PAD_CSI_D9__GPIO_4_21 IOMUX_PAD(0x334, 0x13c, 0x15, 0, 0, NO_PAD_CTRL) + +#define MX25_PAD_CSI_MCLK__CSI_MCLK IOMUX_PAD(0x338, 0x140, 0x10, 0, 0, NO_PAD_CTRL) +#define MX25_PAD_CSI_MCLK__GPIO_1_8 IOMUX_PAD(0x338, 0x140, 0x15, 0, 0, NO_PAD_CTRL) + +#define MX25_PAD_CSI_VSYNC__CSI_VSYNC IOMUX_PAD(0x33c, 0x144, 0x10, 0, 0, NO_PAD_CTRL) +#define MX25_PAD_CSI_VSYNC__GPIO_1_9 IOMUX_PAD(0x33c, 0x144, 0x15, 0, 0, NO_PAD_CTRL) + +#define MX25_PAD_CSI_HSYNC__CSI_HSYNC IOMUX_PAD(0x340, 0x148, 0x10, 0, 0, NO_PAD_CTRL) +#define MX25_PAD_CSI_HSYNC__GPIO_1_10 IOMUX_PAD(0x340, 0x148, 0x15, 0, 0, NO_PAD_CTRL) + +#define MX25_PAD_CSI_PIXCLK__CSI_PIXCLK IOMUX_PAD(0x344, 0x14c, 0x10, 0, 0, NO_PAD_CTRL) +#define MX25_PAD_CSI_PIXCLK__GPIO_1_11 IOMUX_PAD(0x344, 0x14c, 0x15, 0, 0, NO_PAD_CTRL) + +#define MX25_PAD_I2C1_CLK__I2C1_CLK IOMUX_PAD(0x348, 0x150, 0x10, 0, 0, NO_PAD_CTRL) +#define MX25_PAD_I2C1_CLK__GPIO_1_12 IOMUX_PAD(0x348, 0x150, 0x15, 0, 0, NO_PAD_CTRL) + +#define MX25_PAD_I2C1_DAT__I2C1_DAT IOMUX_PAD(0x34c, 0x154, 0x10, 0, 0, NO_PAD_CTRL) +#define MX25_PAD_I2C1_DAT__GPIO_1_13 IOMUX_PAD(0x34c, 0x154, 0x15, 0, 0, NO_PAD_CTRL) + +#define MX25_PAD_CSPI1_MOSI__CSPI1_MOSI IOMUX_PAD(0x350, 0x158, 0x10, 0, 0, NO_PAD_CTRL) +#define MX25_PAD_CSPI1_MOSI__GPIO_1_14 IOMUX_PAD(0x350, 0x158, 0x15, 0, 0, NO_PAD_CTRL) + +#define MX25_PAD_CSPI1_MISO__CSPI1_MISO IOMUX_PAD(0x354, 0x15c, 0x10, 0, 0, NO_PAD_CTRL) +#define MX25_PAD_CSPI1_MISO__GPIO_1_15 IOMUX_PAD(0x354, 0x15c, 0x15, 0, 0, NO_PAD_CTRL) + +#define MX25_PAD_CSPI1_SS0__CSPI1_SS0 IOMUX_PAD(0x358, 0x160, 0x10, 0, 0, NO_PAD_CTRL) +#define MX25_PAD_CSPI1_SS0__GPIO_1_16 IOMUX_PAD(0x358, 0x160, 0x15, 0, 0, NO_PAD_CTRL) + +#define MX25_PAD_CSPI1_SS1__CSPI1_SS1 IOMUX_PAD(0x35c, 0x164, 0x10, 0, 0, NO_PAD_CTRL) +#define MX25_PAD_CSPI1_SS1__GPIO_1_17 IOMUX_PAD(0x35c, 0x164, 0x15, 0, 0, NO_PAD_CTRL) + +#define MX25_PAD_CSPI1_SCLK__CSPI1_SCLK IOMUX_PAD(0x360, 0x168, 0x10, 0, 0, NO_PAD_CTRL) +#define MX25_PAD_CSPI1_SCLK__GPIO_1_18 IOMUX_PAD(0x360, 0x168, 0x15, 0, 0, NO_PAD_CTRL) + +#define MX25_PAD_CSPI1_RDY__CSPI1_RDY IOMUX_PAD(0x364, 0x16c, 0x10, 0, 0, PAD_CTL_PKE) +#define MX25_PAD_CSPI1_RDY__GPIO_2_22 IOMUX_PAD(0x364, 0x16c, 0x15, 0, 0, NO_PAD_CTRL) + +#define MX25_PAD_UART1_RXD__UART1_RXD IOMUX_PAD(0x368, 0x170, 0x10, 0, 0, PAD_CTL_PUS_100K_DOWN) +#define MX25_PAD_UART1_RXD__GPIO_4_22 IOMUX_PAD(0x368, 0x170, 0x15, 0, 0, NO_PAD_CTRL) + +#define MX25_PAD_UART1_TXD__UART1_TXD IOMUX_PAD(0x36c, 0x174, 0x10, 0, 0, NO_PAD_CTRL) +#define MX25_PAD_UART1_TXD__GPIO_4_23 IOMUX_PAD(0x36c, 0x174, 0x15, 0, 0, NO_PAD_CTRL) + +#define MX25_PAD_UART1_RTS__UART1_RTS IOMUX_PAD(0x370, 0x178, 0x10, 0, 0, PAD_CTL_PUS_100K_UP) +#define MX25_PAD_UART1_RTS__CSI_D0 IOMUX_PAD(0x370, 0x178, 0x11, 0x488, 1, NO_PAD_CTRL) +#define MX25_PAD_UART1_RTS__GPIO_4_24 IOMUX_PAD(0x370, 0x178, 0x15, 0, 0, NO_PAD_CTRL) + +#define MX25_PAD_UART1_CTS__UART1_CTS IOMUX_PAD(0x374, 0x17c, 0x10, 0, 0, PAD_CTL_PUS_100K_UP) +#define MX25_PAD_UART1_CTS__CSI_D1 IOMUX_PAD(0x374, 0x17c, 0x11, 0x48c, 1, NO_PAD_CTRL) +#define MX25_PAD_UART1_CTS__GPIO_4_25 IOMUX_PAD(0x374, 0x17c, 0x15, 0, 0, NO_PAD_CTRL) + +#define MX25_PAD_UART2_RXD__UART2_RXD IOMUX_PAD(0x378, 0x180, 0x10, 0, 0, NO_PAD_CTRL) +#define MX25_PAD_UART2_RXD__GPIO_4_26 IOMUX_PAD(0x378, 0x180, 0x15, 0, 0, NO_PAD_CTRL) + +#define MX25_PAD_UART2_TXD__UART2_TXD IOMUX_PAD(0x37c, 0x184, 0x10, 0, 0, NO_PAD_CTRL) +#define MX25_PAD_UART2_TXD__GPIO_4_27 IOMUX_PAD(0x37c, 0x184, 0x15, 0, 0, NO_PAD_CTRL) + +#define MX25_PAD_UART2_RTS__UART2_RTS IOMUX_PAD(0x380, 0x188, 0x10, 0, 0, NO_PAD_CTRL) +#define MX25_PAD_UART2_RTS__FEC_COL IOMUX_PAD(0x380, 0x188, 0x12, 0x504, 2, NO_PAD_CTL) +#define MX25_PAD_UART2_RTS__GPIO_4_28 IOMUX_PAD(0x380, 0x188, 0x15, 0, 0, NO_PAD_CTRL) + +#define MX25_PAD_UART2_CTS__FEC_RX_ER IOMUX_PAD(0x384, 0x18c, 0x12, 0x518, 2, NO_PAD_CTL) +#define MX25_PAD_UART2_CTS__UART2_CTS IOMUX_PAD(0x384, 0x18c, 0x10, 0, 0, NO_PAD_CTRL) +#define MX25_PAD_UART2_CTS__GPIO_4_29 IOMUX_PAD(0x384, 0x18c, 0x15, 0, 0, NO_PAD_CTRL) + +#define MX25_PAD_SD1_CMD__SD1_CMD IOMUX_PAD(0x388, 0x190, 0x10, 0, 0, PAD_CTL_PUS_47K_UP) +#define MX25_PAD_SD1_CMD__FEC_RDATA2 IOMUX_PAD(0x388, 0x190, 0x12, 0x50c, 2, NO_PAD_CTL) +#define MX25_PAD_SD1_CMD__GPIO_2_23 IOMUX_PAD(0x388, 0x190, 0x15, 0, 0, NO_PAD_CTRL) + +#define MX25_PAD_SD1_CLK__SD1_CLK IOMUX_PAD(0x38c, 0x194, 0x10, 0, 0, PAD_CTL_PUS_47K_UP) +#define MX25_PAD_SD1_CLK__FEC_RDATA3 IOMUX_PAD(0x38c, 0x194, 0x12, 0x510, 2, NO_PAD_CTL) +#define MX25_PAD_SD1_CLK__GPIO_2_24 IOMUX_PAD(0x38c, 0x194, 0x15, 0, 0, NO_PAD_CTRL) + +#define MX25_PAD_SD1_DATA0__SD1_DATA0 IOMUX_PAD(0x390, 0x198, 0x10, 0, 0, PAD_CTL_PUS_47K_UP) +#define MX25_PAD_SD1_DATA0__GPIO_2_25 IOMUX_PAD(0x390, 0x198, 0x15, 0, 0, NO_PAD_CTRL) + +#define MX25_PAD_SD1_DATA1__SD1_DATA1 IOMUX_PAD(0x394, 0x19c, 0x10, 0, 0, PAD_CTL_PUS_47K_UP) +#define MX25_PAD_SD1_DATA1__AUD7_RXD IOMUX_PAD(0x394, 0x19c, 0x13, 0x478, 0, NO_PAD_CTRL) +#define MX25_PAD_SD1_DATA1__GPIO_2_26 IOMUX_PAD(0x394, 0x19c, 0x15, 0, 0, NO_PAD_CTRL) + +#define MX25_PAD_SD1_DATA2__SD1_DATA2 IOMUX_PAD(0x398, 0x1a0, 0x10, 0, 0, PAD_CTL_PUS_47K_UP) +#define MX25_PAD_SD1_DATA2__FEC_RX_CLK IOMUX_PAD(0x398, 0x1a0, 0x15, 0x514, 2, NO_PAD_CTL) +#define MX25_PAD_SD1_DATA2__GPIO_2_27 IOMUX_PAD(0x398, 0x1a0, 0x15, 0, 0, NO_PAD_CTRL) + +#define MX25_PAD_SD1_DATA3__SD1_DATA3 IOMUX_PAD(0x39c, 0x1a4, 0x10, 0, 0, PAD_CTL_PUS_47K_UP) +#define MX25_PAD_SD1_DATA3__FEC_CRS IOMUX_PAD(0x39c, 0x1a4, 0x10, 0x508, 2, NO_PAD_CTL) +#define MX25_PAD_SD1_DATA3__GPIO_2_28 IOMUX_PAD(0x39c, 0x1a4, 0x15, 0, 0, NO_PAD_CTRL) + +#define MX25_PAD_KPP_ROW0__KPP_ROW0 IOMUX_PAD(0x3a0, 0x1a8, 0x10, 0, 0, PAD_CTL_PKE) +#define MX25_PAD_KPP_ROW0__GPIO_2_29 IOMUX_PAD(0x3a0, 0x1a8, 0x15, 0, 0, NO_PAD_CTRL) + +#define MX25_PAD_KPP_ROW1__KPP_ROW1 IOMUX_PAD(0x3a4, 0x1ac, 0x10, 0, 0, PAD_CTL_PKE) +#define MX25_PAD_KPP_ROW1__GPIO_2_30 IOMUX_PAD(0x3a4, 0x1ac, 0x15, 0, 0, NO_PAD_CTRL) + +#define MX25_PAD_KPP_ROW2__KPP_ROW2 IOMUX_PAD(0x3a8, 0x1b0, 0x10, 0, 0, PAD_CTL_PKE) +#define MX25_PAD_KPP_ROW2__CSI_D0 IOMUX_PAD(0x3a8, 0x1b0, 0x13, 0x488, 2, NO_PAD_CTRL) +#define MX25_PAD_KPP_ROW2__GPIO_2_31 IOMUX_PAD(0x3a8, 0x1b0, 0x15, 0, 0, NO_PAD_CTRL) + +#define MX25_PAD_KPP_ROW3__KPP_ROW3 IOMUX_PAD(0x3ac, 0x1b4, 0x10, 0, 0, PAD_CTL_PKE) +#define MX25_PAD_KPP_ROW3__CSI_LD1 IOMUX_PAD(0x3ac, 0x1b4, 0x13, 0x48c, 2, NO_PAD_CTRL) +#define MX25_PAD_KPP_ROW3__GPIO_3_0 IOMUX_PAD(0x3ac, 0x1b4, 0x15, 0, 0, NO_PAD_CTRL) + +#define MX25_PAD_KPP_COL0__KPP_COL0 IOMUX_PAD(0x3b0, 0x1b8, 0x10, 0, 0, PAD_CTL_PKE | PAD_CTL_ODE) +#define MX25_PAD_KPP_COL0__GPIO_3_1 IOMUX_PAD(0x3b0, 0x1b8, 0x15, 0, 0, NO_PAD_CTRL) + +#define MX25_PAD_KPP_COL1__KPP_COL1 IOMUX_PAD(0x3b4, 0x1bc, 0x10, 0, 0, PAD_CTL_PKE | PAD_CTL_ODE) +#define MX25_PAD_KPP_COL1__GPIO_3_2 IOMUX_PAD(0x3b4, 0x1bc, 0x15, 0, 0, NO_PAD_CTRL) + +#define MX25_PAD_KPP_COL2__KPP_COL2 IOMUX_PAD(0x3b8, 0x1c0, 0x10, 0, 0, PAD_CTL_PKE | PAD_CTL_ODE) +#define MX25_PAD_KPP_COL2__GPIO_3_3 IOMUX_PAD(0x3b8, 0x1c0, 0x15, 0, 0, NO_PAD_CTRL) + +#define MX25_PAD_KPP_COL3__KPP_COL3 IOMUX_PAD(0x3bc, 0x1c4, 0x10, 0, 0, PAD_CTL_PKE | PAD_CTL_ODE) +#define MX25_PAD_KPP_COL3__GPIO_3_4 IOMUX_PAD(0x3bc, 0x1c4, 0x15, 0, 0, NO_PAD_CTRL) + +#define MX25_PAD_FEC_MDC__FEC_MDC IOMUX_PAD(0x3c0, 0x1c8, 0x10, 0, 0, NO_PAD_CTL) +#define MX25_PAD_FEC_MDC__AUD4_TXD IOMUX_PAD(0x3c0, 0x1c8, 0x12, 0x464, 1, NO_PAD_CTRL) +#define MX25_PAD_FEC_MDC__GPIO_3_5 IOMUX_PAD(0x3c0, 0x1c8, 0x15, 0, 0, NO_PAD_CTRL) + +#define MX25_PAD_FEC_MDIO__FEC_MDIO IOMUX_PAD(0x3c4, 0x1cc, 0x10, 0, 0, PAD_CTL_HYS | PAD_CTL_PUS_22K_UP) +#define MX25_PAD_FEC_MDIO__AUD4_RXD IOMUX_PAD(0x3c4, 0x1cc, 0x12, 0x460, 1, NO_PAD_CTRL) +#define MX25_PAD_FEC_MDIO__GPIO_3_6 IOMUX_PAD(0x3c4, 0x1cc, 0x15, 0, 0, NO_PAD_CTRL) + +#define MX25_PAD_FEC_TDATA0__FEC_TDATA0 IOMUX_PAD(0x3c8, 0x1d0, 0x10, 0, 0, NO_PAD_CTL) +#define MX25_PAD_FEC_TDATA0__GPIO_3_7 IOMUX_PAD(0x3c8, 0x1d0, 0x15, 0, 0, NO_PAD_CTRL) + +#define MX25_PAD_FEC_TDATA1__FEC_TDATA1 IOMUX_PAD(0x3cc, 0x1d4, 0x10, 0, 0, NO_PAD_CTL) +#define MX25_PAD_FEC_TDATA1__AUD4_TXFS IOMUX_PAD(0x3cc, 0x1d4, 0x12, 0x474, 1, NO_PAD_CTRL) +#define MX25_PAD_FEC_TDATA1__GPIO_3_8 IOMUX_PAD(0x3cc, 0x1d4, 0x15, 0, 0, NO_PAD_CTRL) + +#define MX25_PAD_FEC_TX_EN__FEC_TX_EN IOMUX_PAD(0x3d0, 0x1d8, 0x10, 0, 0, NO_PAD_CTL) +#define MX25_PAD_FEC_TX_EN__GPIO_3_9 IOMUX_PAD(0x3d0, 0x1d8, 0x15, 0, 0, NO_PAD_CTRL) + +#define MX25_PAD_FEC_RDATA0__FEC_RDATA0 IOMUX_PAD(0x3d4, 0x1dc, 0x10, 0, 0, PAD_CTL_PUS_100K_DOWN | NO_PAD_CTL) +#define MX25_PAD_FEC_RDATA0__GPIO_3_10 IOMUX_PAD(0x3d4, 0x1dc, 0x15, 0, 0, NO_PAD_CTRL) + +#define MX25_PAD_FEC_RDATA1__FEC_RDATA1 IOMUX_PAD(0x3d8, 0x1e0, 0x10, 0, 0, PAD_CTL_PUS_100K_DOWN | NO_PAD_CTL) +#define MX25_PAD_FEC_RDATA1__GPIO_3_11 IOMUX_PAD(0x3d8, 0x1e0, 0x15, 0, 0, NO_PAD_CTRL) + +#define MX25_PAD_FEC_RX_DV__FEC_RX_DV IOMUX_PAD(0x3dc, 0x1e4, 0x10, 0, 0, PAD_CTL_PUS_100K_DOWN | NO_PAD_CTL) +#define MX25_PAD_FEC_RX_DV__CAN2_RX IOMUX_PAD(0x3dc, 0x1e4, 0x14, 0x484, 0, PAD_CTL_PUS_22K_UP) +#define MX25_PAD_FEC_RX_DV__GPIO_3_12 IOMUX_PAD(0x3dc, 0x1e4, 0x15, 0, 0, NO_PAD_CTRL) + +#define MX25_PAD_FEC_TX_CLK__FEC_TX_CLK IOMUX_PAD(0x3e0, 0x1e8, 0x10, 0, 0, PAD_CTL_HYS | PAD_CTL_PUS_100K_DOWN) +#define MX25_PAD_FEC_TX_CLK__GPIO_3_13 IOMUX_PAD(0x3e0, 0x1e8, 0x15, 0, 0, NO_PAD_CTRL) + +#define MX25_PAD_RTCK__RTCK IOMUX_PAD(0x3e4, 0x1ec, 0x10, 0, 0, NO_PAD_CTRL) +#define MX25_PAD_RTCK__OWIRE IOMUX_PAD(0x3e4, 0x1ec, 0x11, 0, 0, NO_PAD_CTRL) +#define MX25_PAD_RTCK__GPIO_3_14 IOMUX_PAD(0x3e4, 0x1ec, 0x15, 0, 0, NO_PAD_CTRL) + +#define MX25_PAD_DE_B__DE_B IOMUX_PAD(0x3ec, 0x1f0, 0x10, 0, 0, NO_PAD_CTRL) +#define MX25_PAD_DE_B__GPIO_2_20 IOMUX_PAD(0x3ec, 0x1f0, 0x15, 0, 0, NO_PAD_CTRL) + +#define MX25_PAD_TDO__TDO IOMUX_PAD(0x3e8, 0x000, 0x00, 0, 0, NO_PAD_CTRL) + +#define MX25_PAD_GPIO_A__GPIO_A IOMUX_PAD(0x3f0, 0x1f4, 0x10, 0, 0, NO_PAD_CTRL) +#define MX25_PAD_GPIO_A__CAN1_TX IOMUX_PAD(0x3f0, 0x1f4, 0x16, 0, 0, PAD_CTL_PUS_22K_UP) +#define MX25_PAD_GPIO_A__USBOTG_PWR IOMUX_PAD(0x3f0, 0x1f4, 0x12, 0, 0, PAD_CTL_PKE) + +#define MX25_PAD_GPIO_B__GPIO_B IOMUX_PAD(0x3f4, 0x1f8, 0x10, 0, 0, NO_PAD_CTRL) +#define MX25_PAD_GPIO_B__CAN1_RX IOMUX_PAD(0x3f4, 0x1f8, 0x16, 0x480, 1, PAD_CTL_PUS_22K) +#define MX25_PAD_GPIO_B__USBOTG_OC IOMUX_PAD(0x3f4, 0x1f8, 0x12, 0x57c, 1, PAD_CTL_PUS_100K_UP) + +#define MX25_PAD_GPIO_C__GPIO_C IOMUX_PAD(0x3f8, 0x1fc, 0x10, 0, 0, NO_PAD_CTRL) +#define MX25_PAD_GPIO_C__CAN2_TX IOMUX_PAD(0x3f8, 0x1fc, 0x16, 0, 0, PAD_CTL_PUS_22K_UP) + +#define MX25_PAD_GPIO_D__GPIO_D IOMUX_PAD(0x3fc, 0x200, 0x10, 0, 0, NO_PAD_CTRL) +#define MX25_PAD_GPIO_D__CAN2_RX IOMUX_PAD(0x3fc, 0x200, 0x16, 0x484, 1, PAD_CTL_PUS_22K_UP) + +#define MX25_PAD_GPIO_E__GPIO_E IOMUX_PAD(0x400, 0x204, 0x10, 0, 0, NO_PAD_CTRL) +#define MX25_PAD_GPIO_E__AUD7_TXD IOMUX_PAD(0x400, 0x204, 0x14, 0, 0, NO_PAD_CTRL) + +#define MX25_PAD_GPIO_F__GPIO_F IOMUX_PAD(0x404, 0x208, 0x10, 0, 0, NO_PAD_CTRL) +#define MX25_PAD_GPIO_F__AUD7_TXC IOMUX_PAD(0x404, 0x208, 0x14, 0, 0, NO_PAD_CTRL) + +#define MX25_PAD_EXT_ARMCLK__EXT_ARMCLK IOMUX_PAD(0x000, 0x20c, 0x10, 0, 0, NO_PAD_CTRL) +#define MX25_PAD_EXT_ARMCLK__GPIO_3_15 IOMUX_PAD(0x000, 0x20c, 0x15, 0, 0, NO_PAD_CTRL) + +#define MX25_PAD_UPLL_BYPCLK__UPLL_BYPCLK IOMUX_PAD(0x000, 0x210, 0x10, 0, 0, NO_PAD_CTRL) +#define MX25_PAD_UPLL_BYPCLK__GPIO_3_16 IOMUX_PAD(0x000, 0x210, 0x15, 0, 0, NO_PAD_CTRL) + +#define MX25_PAD_VSTBY_REQ__VSTBY_REQ IOMUX_PAD(0x408, 0x214, 0x10, 0, 0, NO_PAD_CTRL) +#define MX25_PAD_VSTBY_REQ__AUD7_TXFS IOMUX_PAD(0x408, 0x214, 0x14, 0, 0, NO_PAD_CTRL) +#define MX25_PAD_VSTBY_REQ__GPIO_3_17 IOMUX_PAD(0x408, 0x214, 0x15, 0, 0, NO_PAD_CTRL) +#define MX25_PAD_VSTBY_ACK__VSTBY_ACK IOMUX_PAD(0x40c, 0x218, 0x10, 0, 0, NO_PAD_CTRL) +#define MX25_PAD_VSTBY_ACK__GPIO_3_18 IOMUX_PAD(0x40c, 0x218, 0x15, 0, 0, NO_PAD_CTRL) + +#define MX25_PAD_POWER_FAIL__POWER_FAIL IOMUX_PAD(0x410, 0x21c, 0x10, 0, 0, NO_PAD_CTRL) +#define MX25_PAD_POWER_FAIL__AUD7_RXD IOMUX_PAD(0x410, 0x21c, 0x14, 0x478, 1, NO_PAD_CTRL) +#define MX25_PAD_POWER_FAIL__GPIO_3_19 IOMUX_PAD(0x410, 0x21c, 0x15, 0, 0, NO_PAD_CTRL) + +#define MX25_PAD_CLKO__CLKO IOMUX_PAD(0x414, 0x220, 0x10, 0, 0, NO_PAD_CTRL) +#define MX25_PAD_CLKO__GPIO_2_21 IOMUX_PAD(0x414, 0x220, 0x15, 0, 0, NO_PAD_CTRL) + +#define MX25_PAD_BOOT_MODE0__BOOT_MODE0 IOMUX_PAD(0x000, 0x224, 0x00, 0, 0, NO_PAD_CTRL) +#define MX25_PAD_BOOT_MODE0__GPIO_4_30 IOMUX_PAD(0x000, 0x224, 0x05, 0, 0, NO_PAD_CTRL) +#define MX25_PAD_BOOT_MODE1__BOOT_MODE1 IOMUX_PAD(0x000, 0x228, 0x00, 0, 0, NO_PAD_CTRL) +#define MX25_PAD_BOOT_MODE1__GPIO_4_31 IOMUX_PAD(0x000, 0x228, 0x05, 0, 0, NO_PAD_CTRL) + +#define MX25_PAD_CTL_GRP_DVS_MISC IOMUX_PAD(0x418, 0x000, 0, 0, 0, NO_PAD_CTRL) +#define MX25_PAD_CTL_GRP_DSE_FEC IOMUX_PAD(0x41c, 0x000, 0, 0, 0, NO_PAD_CTRL) +#define MX25_PAD_CTL_GRP_DVS_JTAG IOMUX_PAD(0x420, 0x000, 0, 0, 0, NO_PAD_CTRL) +#define MX25_PAD_CTL_GRP_DSE_NFC IOMUX_PAD(0x424, 0x000, 0, 0, 0, NO_PAD_CTRL) +#define MX25_PAD_CTL_GRP_DSE_CSI IOMUX_PAD(0x428, 0x000, 0, 0, 0, NO_PAD_CTRL) +#define MX25_PAD_CTL_GRP_DSE_WEIM IOMUX_PAD(0x42c, 0x000, 0, 0, 0, NO_PAD_CTRL) +#define MX25_PAD_CTL_GRP_DSE_DDR IOMUX_PAD(0x430, 0x000, 0, 0, 0, NO_PAD_CTRL) +#define MX25_PAD_CTL_GRP_DVS_CRM IOMUX_PAD(0x434, 0x000, 0, 0, 0, NO_PAD_CTRL) +#define MX25_PAD_CTL_GRP_DSE_KPP IOMUX_PAD(0x438, 0x000, 0, 0, 0, NO_PAD_CTRL) +#define MX25_PAD_CTL_GRP_DSE_SDHC1 IOMUX_PAD(0x43c, 0x000, 0, 0, 0, NO_PAD_CTRL) +#define MX25_PAD_CTL_GRP_DSE_LCD IOMUX_PAD(0x440, 0x000, 0, 0, 0, NO_PAD_CTRL) +#define MX25_PAD_CTL_GRP_DSE_UART IOMUX_PAD(0x444, 0x000, 0, 0, 0, NO_PAD_CTRL) +#define MX25_PAD_CTL_GRP_DVS_NFC IOMUX_PAD(0x448, 0x000, 0, 0, 0, NO_PAD_CTRL) +#define MX25_PAD_CTL_GRP_DVS_CSI IOMUX_PAD(0x44c, 0x000, 0, 0, 0, NO_PAD_CTRL) +#define MX25_PAD_CTL_GRP_DSE_CSPI1 IOMUX_PAD(0x450, 0x000, 0, 0, 0, NO_PAD_CTRL) +#define MX25_PAD_CTL_GRP_DDRTYPE IOMUX_PAD(0x454, 0x000, 0, 0, 0, NO_PAD_CTRL) +#define MX25_PAD_CTL_GRP_DVS_SDHC1 IOMUX_PAD(0x458, 0x000, 0, 0, 0, NO_PAD_CTRL) +#define MX25_PAD_CTL_GRP_DVS_LCD IOMUX_PAD(0x45c, 0x000, 0, 0, 0, NO_PAD_CTRL) + +#endif // __ASSEMBLY__ +#endif // __IOMUX_MX25_H__ diff --git a/arch/arm/plat-mxc/include/mach/iomux.h b/arch/arm/plat-mxc/include/mach/iomux.h index 171f8adc110..6d49f8ae325 100644 --- a/arch/arm/plat-mxc/include/mach/iomux.h +++ b/arch/arm/plat-mxc/include/mach/iomux.h @@ -49,6 +49,9 @@ #ifdef CONFIG_ARCH_MX2 # define GPIO_PORT_MAX 5 #endif +#ifdef CONFIG_ARCH_MX25 +# define GPIO_PORT_MAX 3 +#endif #ifndef GPIO_PORT_MAX # error "GPIO config port count unknown!" @@ -107,6 +110,9 @@ #include #endif #endif +#ifdef CONFIG_ARCH_MX25 +#include +#endif /* decode irq number to use with IMR(x), ISR(x) and friends */ -- cgit v1.2.3 From fd6ac7bb9d671d36fd7536c68fde977d197756ab Mon Sep 17 00:00:00 2001 From: Dmitriy Taychenachev Date: Fri, 31 Jul 2009 20:29:22 +0900 Subject: MXC: add basic MXC91231 support Signed-off-by: Dmitriy Taychenachev Signed-off-by: Sascha Hauer --- arch/arm/Makefile | 1 + arch/arm/mach-mxc91231/Kconfig | 11 + arch/arm/mach-mxc91231/Makefile | 2 + arch/arm/mach-mxc91231/Makefile.boot | 3 + arch/arm/mach-mxc91231/clock.c | 642 +++++++++++++++++++++++++++ arch/arm/mach-mxc91231/crm_regs.h | 399 +++++++++++++++++ arch/arm/mach-mxc91231/devices.c | 251 +++++++++++ arch/arm/mach-mxc91231/devices.h | 13 + arch/arm/mach-mxc91231/magx-zn5.c | 59 +++ arch/arm/mach-mxc91231/mm.c | 94 ++++ arch/arm/mach-mxc91231/system.c | 51 +++ arch/arm/plat-mxc/Kconfig | 8 + arch/arm/plat-mxc/include/mach/common.h | 6 + arch/arm/plat-mxc/include/mach/debug-macro.S | 8 + arch/arm/plat-mxc/include/mach/hardware.h | 4 + arch/arm/plat-mxc/include/mach/irqs.h | 2 + arch/arm/plat-mxc/include/mach/memory.h | 2 + arch/arm/plat-mxc/include/mach/mxc.h | 15 +- arch/arm/plat-mxc/include/mach/mxc91231.h | 315 +++++++++++++ arch/arm/plat-mxc/include/mach/system.h | 10 + arch/arm/plat-mxc/include/mach/timex.h | 2 + arch/arm/plat-mxc/include/mach/uncompress.h | 4 + arch/arm/plat-mxc/system.c | 7 + arch/arm/plat-mxc/time.c | 2 +- 24 files changed, 1909 insertions(+), 2 deletions(-) create mode 100644 arch/arm/mach-mxc91231/Kconfig create mode 100644 arch/arm/mach-mxc91231/Makefile create mode 100644 arch/arm/mach-mxc91231/Makefile.boot create mode 100644 arch/arm/mach-mxc91231/clock.c create mode 100644 arch/arm/mach-mxc91231/crm_regs.h create mode 100644 arch/arm/mach-mxc91231/devices.c create mode 100644 arch/arm/mach-mxc91231/devices.h create mode 100644 arch/arm/mach-mxc91231/magx-zn5.c create mode 100644 arch/arm/mach-mxc91231/mm.c create mode 100644 arch/arm/mach-mxc91231/system.c create mode 100644 arch/arm/plat-mxc/include/mach/mxc91231.h diff --git a/arch/arm/Makefile b/arch/arm/Makefile index 95ba3c5ca14..c1d60038328 100644 --- a/arch/arm/Makefile +++ b/arch/arm/Makefile @@ -159,6 +159,7 @@ machine-$(CONFIG_ARCH_U300) := u300 machine-$(CONFIG_ARCH_VERSATILE) := versatile machine-$(CONFIG_ARCH_W90X900) := w90x900 machine-$(CONFIG_FOOTBRIDGE) := footbridge +machine-$(CONFIG_ARCH_MXC91231) := mxc91231 # Platform directory name. This list is sorted alphanumerically # by CONFIG_* macro name. diff --git a/arch/arm/mach-mxc91231/Kconfig b/arch/arm/mach-mxc91231/Kconfig new file mode 100644 index 00000000000..8e5fa38ebb6 --- /dev/null +++ b/arch/arm/mach-mxc91231/Kconfig @@ -0,0 +1,11 @@ +if ARCH_MXC91231 + +comment "MXC91231 platforms:" + +config MACH_MAGX_ZN5 + bool "Support Motorola Zn5 GSM phone" + default n + help + Include support for Motorola Zn5 GSM phone. + +endif diff --git a/arch/arm/mach-mxc91231/Makefile b/arch/arm/mach-mxc91231/Makefile new file mode 100644 index 00000000000..eb70b669c55 --- /dev/null +++ b/arch/arm/mach-mxc91231/Makefile @@ -0,0 +1,2 @@ +obj-y := mm.o clock.o devices.o system.o +obj-$(CONFIG_MACH_MAGX_ZN5) += magx-zn5.o diff --git a/arch/arm/mach-mxc91231/Makefile.boot b/arch/arm/mach-mxc91231/Makefile.boot new file mode 100644 index 00000000000..9939a19d99a --- /dev/null +++ b/arch/arm/mach-mxc91231/Makefile.boot @@ -0,0 +1,3 @@ + zreladdr-y := 0x90008000 +params_phys-y := 0x90000100 +initrd_phys-y := 0x90800000 diff --git a/arch/arm/mach-mxc91231/clock.c b/arch/arm/mach-mxc91231/clock.c new file mode 100644 index 00000000000..ecfa37fef8a --- /dev/null +++ b/arch/arm/mach-mxc91231/clock.c @@ -0,0 +1,642 @@ +#include +#include +#include +#include + +#include +#include +#include + +#include +#include +#include + +#include "crm_regs.h" + +#define CRM_SMALL_DIVIDER(base, name) \ + crm_small_divider(base, \ + base ## _ ## name ## _OFFSET, \ + base ## _ ## name ## _MASK) +#define CRM_1DIVIDER(base, name) \ + crm_divider(base, \ + base ## _ ## name ## _OFFSET, \ + base ## _ ## name ## _MASK, 1) +#define CRM_16DIVIDER(base, name) \ + crm_divider(base, \ + base ## _ ## name ## _OFFSET, \ + base ## _ ## name ## _MASK, 16) + +static u32 crm_small_divider(void __iomem *reg, u8 offset, u32 mask) +{ + static const u32 crm_small_dividers[] = { + 2, 3, 4, 5, 6, 8, 10, 12 + }; + u8 idx; + + idx = (__raw_readl(reg) & mask) >> offset; + if (idx > 7) + return 1; + + return crm_small_dividers[idx]; +} + +static u32 crm_divider(void __iomem *reg, u8 offset, u32 mask, u32 z) +{ + u32 div; + div = (__raw_readl(reg) & mask) >> offset; + return div ? div : z; +} + +static int _clk_1bit_enable(struct clk *clk) +{ + u32 reg; + + reg = __raw_readl(clk->enable_reg); + reg |= 1 << clk->enable_shift; + __raw_writel(reg, clk->enable_reg); + + return 0; +} + +static void _clk_1bit_disable(struct clk *clk) +{ + u32 reg; + + reg = __raw_readl(clk->enable_reg); + reg &= ~(1 << clk->enable_shift); + __raw_writel(reg, clk->enable_reg); +} + +static int _clk_3bit_enable(struct clk *clk) +{ + u32 reg; + + reg = __raw_readl(clk->enable_reg); + reg |= 0x7 << clk->enable_shift; + __raw_writel(reg, clk->enable_reg); + + return 0; +} + +static void _clk_3bit_disable(struct clk *clk) +{ + u32 reg; + + reg = __raw_readl(clk->enable_reg); + reg &= ~(0x7 << clk->enable_shift); + __raw_writel(reg, clk->enable_reg); +} + +static unsigned long ckih_rate; + +static unsigned long clk_ckih_get_rate(struct clk *clk) +{ + return ckih_rate; +} + +static struct clk ckih_clk = { + .get_rate = clk_ckih_get_rate, +}; + +static unsigned long clk_ckih_x2_get_rate(struct clk *clk) +{ + return 2 * clk_get_rate(clk->parent); +} + +static struct clk ckih_x2_clk = { + .parent = &ckih_clk, + .get_rate = clk_ckih_x2_get_rate, +}; + +static unsigned long clk_ckil_get_rate(struct clk *clk) +{ + return CKIL_CLK_FREQ; +} + +static struct clk ckil_clk = { + .get_rate = clk_ckil_get_rate, +}; + +/* plls stuff */ +static struct clk mcu_pll_clk; +static struct clk dsp_pll_clk; +static struct clk usb_pll_clk; + +static struct clk *pll_clk(u8 sel) +{ + switch (sel) { + case 0: + return &mcu_pll_clk; + case 1: + return &dsp_pll_clk; + case 2: + return &usb_pll_clk; + } + BUG(); +} + +static void __iomem *pll_base(struct clk *clk) +{ + if (clk == &mcu_pll_clk) + return MXC_PLL0_BASE; + else if (clk == &dsp_pll_clk) + return MXC_PLL1_BASE; + else if (clk == &usb_pll_clk) + return MXC_PLL2_BASE; + BUG(); +} + +static unsigned long clk_pll_get_rate(struct clk *clk) +{ + const void __iomem *pllbase; + unsigned long dp_op, dp_mfd, dp_mfn, pll_hfsm, ref_clk, mfi; + long mfn, mfn_abs, mfd, pdf; + s64 temp; + pllbase = pll_base(clk); + + pll_hfsm = __raw_readl(pllbase + MXC_PLL_DP_CTL) & MXC_PLL_DP_CTL_HFSM; + if (pll_hfsm == 0) { + dp_op = __raw_readl(pllbase + MXC_PLL_DP_OP); + dp_mfd = __raw_readl(pllbase + MXC_PLL_DP_MFD); + dp_mfn = __raw_readl(pllbase + MXC_PLL_DP_MFN); + } else { + dp_op = __raw_readl(pllbase + MXC_PLL_DP_HFS_OP); + dp_mfd = __raw_readl(pllbase + MXC_PLL_DP_HFS_MFD); + dp_mfn = __raw_readl(pllbase + MXC_PLL_DP_HFS_MFN); + } + + pdf = dp_op & MXC_PLL_DP_OP_PDF_MASK; + mfi = (dp_op >> MXC_PLL_DP_OP_MFI_OFFSET) & MXC_PLL_DP_OP_PDF_MASK; + mfi = (mfi <= 5) ? 5 : mfi; + mfd = dp_mfd & MXC_PLL_DP_MFD_MASK; + mfn = dp_mfn & MXC_PLL_DP_MFN_MASK; + mfn = (mfn <= 0x4000000) ? mfn : (mfn - 0x10000000); + + if (mfn < 0) + mfn_abs = -mfn; + else + mfn_abs = mfn; + +/* XXX: actually this asumes that ckih is fed to pll, but spec says + * that ckih_x2 is also possible. need to check this out. + */ + ref_clk = clk_get_rate(&ckih_clk); + + ref_clk *= 2; + ref_clk /= pdf + 1; + + temp = (u64) ref_clk * mfn_abs; + do_div(temp, mfd); + if (mfn < 0) + temp = -temp; + temp += ref_clk * mfi; + + return temp; +} + +static int clk_pll_enable(struct clk *clk) +{ + void __iomem *ctl; + u32 reg; + + ctl = pll_base(clk); + reg = __raw_readl(ctl); + reg |= (MXC_PLL_DP_CTL_RST | MXC_PLL_DP_CTL_UPEN); + __raw_writel(reg, ctl); + do { + reg = __raw_readl(ctl); + } while ((reg & MXC_PLL_DP_CTL_LRF) != MXC_PLL_DP_CTL_LRF); + return 0; +} + +static void clk_pll_disable(struct clk *clk) +{ + void __iomem *ctl; + u32 reg; + + ctl = pll_base(clk); + reg = __raw_readl(ctl); + reg &= ~(MXC_PLL_DP_CTL_RST | MXC_PLL_DP_CTL_UPEN); + __raw_writel(reg, ctl); +} + +static struct clk mcu_pll_clk = { + .parent = &ckih_clk, + .get_rate = clk_pll_get_rate, + .enable = clk_pll_enable, + .disable = clk_pll_disable, +}; + +static struct clk dsp_pll_clk = { + .parent = &ckih_clk, + .get_rate = clk_pll_get_rate, + .enable = clk_pll_enable, + .disable = clk_pll_disable, +}; + +static struct clk usb_pll_clk = { + .parent = &ckih_clk, + .get_rate = clk_pll_get_rate, + .enable = clk_pll_enable, + .disable = clk_pll_disable, +}; +/* plls stuff end */ + +/* ap_ref_clk stuff */ +static struct clk ap_ref_clk; + +static unsigned long clk_ap_ref_get_rate(struct clk *clk) +{ + u32 ascsr, acsr; + u8 ap_pat_ref_div_2, ap_isel, acs, ads; + + ascsr = __raw_readl(MXC_CRMAP_ASCSR); + acsr = __raw_readl(MXC_CRMAP_ACSR); + + /* 0 for ckih, 1 for ckih*2 */ + ap_isel = ascsr & MXC_CRMAP_ASCSR_APISEL; + /* reg divider */ + ap_pat_ref_div_2 = (ascsr >> MXC_CRMAP_ASCSR_AP_PATDIV2_OFFSET) & 0x1; + /* undocumented, 1 for disabling divider */ + ads = (acsr >> MXC_CRMAP_ACSR_ADS_OFFSET) & 0x1; + /* 0 for pat_ref, 1 for divider out */ + acs = acsr & MXC_CRMAP_ACSR_ACS; + + if (acs & !ads) + /* use divided clock */ + return clk_get_rate(clk->parent) / (ap_pat_ref_div_2 ? 2 : 1); + + return clk_get_rate(clk->parent) * (ap_isel ? 2 : 1); +} + +static struct clk ap_ref_clk = { + .parent = &ckih_clk, + .get_rate = clk_ap_ref_get_rate, +}; +/* ap_ref_clk stuff end */ + +/* ap_pre_dfs_clk stuff */ +static struct clk ap_pre_dfs_clk; + +static unsigned long clk_ap_pre_dfs_get_rate(struct clk *clk) +{ + u32 acsr, ascsr; + + acsr = __raw_readl(MXC_CRMAP_ACSR); + ascsr = __raw_readl(MXC_CRMAP_ASCSR); + + if (acsr & MXC_CRMAP_ACSR_ACS) { + u8 sel; + sel = (ascsr & MXC_CRMAP_ASCSR_APSEL_MASK) >> + MXC_CRMAP_ASCSR_APSEL_OFFSET; + return clk_get_rate(pll_clk(sel)) / + CRM_SMALL_DIVIDER(MXC_CRMAP_ACDR, ARMDIV); + } + return clk_get_rate(&ap_ref_clk); +} + +static struct clk ap_pre_dfs_clk = { + .get_rate = clk_ap_pre_dfs_get_rate, +}; +/* ap_pre_dfs_clk stuff end */ + +/* usb_clk stuff */ +static struct clk usb_clk; + +static struct clk *clk_usb_parent(struct clk *clk) +{ + u32 acsr, ascsr; + + acsr = __raw_readl(MXC_CRMAP_ACSR); + ascsr = __raw_readl(MXC_CRMAP_ASCSR); + + if (acsr & MXC_CRMAP_ACSR_ACS) { + u8 sel; + sel = (ascsr & MXC_CRMAP_ASCSR_USBSEL_MASK) >> + MXC_CRMAP_ASCSR_USBSEL_OFFSET; + return pll_clk(sel); + } + return &ap_ref_clk; +} + +static unsigned long clk_usb_get_rate(struct clk *clk) +{ + return clk_get_rate(clk->parent) / + CRM_SMALL_DIVIDER(MXC_CRMAP_ACDER2, USBDIV); +} + +static struct clk usb_clk = { + .enable_reg = MXC_CRMAP_ACDER2, + .enable_shift = MXC_CRMAP_ACDER2_USBEN_OFFSET, + .get_rate = clk_usb_get_rate, + .enable = _clk_1bit_enable, + .disable = _clk_1bit_disable, +}; +/* usb_clk stuff end */ + +static unsigned long clk_ipg_get_rate(struct clk *clk) +{ + return clk_get_rate(clk->parent) / CRM_16DIVIDER(MXC_CRMAP_ACDR, IPDIV); +} + +static unsigned long clk_ahb_get_rate(struct clk *clk) +{ + return clk_get_rate(clk->parent) / + CRM_16DIVIDER(MXC_CRMAP_ACDR, AHBDIV); +} + +static struct clk ipg_clk = { + .parent = &ap_pre_dfs_clk, + .get_rate = clk_ipg_get_rate, +}; + +static struct clk ahb_clk = { + .parent = &ap_pre_dfs_clk, + .get_rate = clk_ahb_get_rate, +}; + +/* perclk_clk stuff */ +static struct clk perclk_clk; + +static unsigned long clk_perclk_get_rate(struct clk *clk) +{ + u32 acder2; + + acder2 = __raw_readl(MXC_CRMAP_ACDER2); + if (acder2 & MXC_CRMAP_ACDER2_BAUD_ISEL_MASK) + return 2 * clk_get_rate(clk->parent); + + return clk_get_rate(clk->parent); +} + +static struct clk perclk_clk = { + .parent = &ckih_clk, + .get_rate = clk_perclk_get_rate, +}; +/* perclk_clk stuff end */ + +/* uart_clk stuff */ +static struct clk uart_clk[]; + +static unsigned long clk_uart_get_rate(struct clk *clk) +{ + u32 div; + + switch (clk->id) { + case 0: + case 1: + div = CRM_SMALL_DIVIDER(MXC_CRMAP_ACDER2, BAUDDIV); + break; + case 2: + div = CRM_SMALL_DIVIDER(MXC_CRMAP_APRA, UART3DIV); + break; + default: + BUG(); + } + return clk_get_rate(clk->parent) / div; +} + +static struct clk uart_clk[] = { + { + .id = 0, + .parent = &perclk_clk, + .enable_reg = MXC_CRMAP_APRA, + .enable_shift = MXC_CRMAP_APRA_UART1EN_OFFSET, + .get_rate = clk_uart_get_rate, + .enable = _clk_1bit_enable, + .disable = _clk_1bit_disable, + }, { + .id = 1, + .parent = &perclk_clk, + .enable_reg = MXC_CRMAP_APRA, + .enable_shift = MXC_CRMAP_APRA_UART2EN_OFFSET, + .get_rate = clk_uart_get_rate, + .enable = _clk_1bit_enable, + .disable = _clk_1bit_disable, + }, { + .id = 2, + .parent = &perclk_clk, + .enable_reg = MXC_CRMAP_APRA, + .enable_shift = MXC_CRMAP_APRA_UART3EN_OFFSET, + .get_rate = clk_uart_get_rate, + .enable = _clk_1bit_enable, + .disable = _clk_1bit_disable, + }, +}; +/* uart_clk stuff end */ + +/* sdhc_clk stuff */ +static struct clk nfc_clk; + +static unsigned long clk_nfc_get_rate(struct clk *clk) +{ + return clk_get_rate(clk->parent) / + CRM_1DIVIDER(MXC_CRMAP_ACDER2, NFCDIV); +} + +static struct clk nfc_clk = { + .parent = &ahb_clk, + .enable_reg = MXC_CRMAP_ACDER2, + .enable_shift = MXC_CRMAP_ACDER2_NFCEN_OFFSET, + .get_rate = clk_nfc_get_rate, + .enable = _clk_1bit_enable, + .disable = _clk_1bit_disable, +}; +/* sdhc_clk stuff end */ + +/* sdhc_clk stuff */ +static struct clk sdhc_clk[]; + +static struct clk *clk_sdhc_parent(struct clk *clk) +{ + u32 aprb; + u8 sel; + u32 mask; + int offset; + + aprb = __raw_readl(MXC_CRMAP_APRB); + + switch (clk->id) { + case 0: + mask = MXC_CRMAP_APRB_SDHC1_ISEL_MASK; + offset = MXC_CRMAP_APRB_SDHC1_ISEL_OFFSET; + break; + case 1: + mask = MXC_CRMAP_APRB_SDHC2_ISEL_MASK; + offset = MXC_CRMAP_APRB_SDHC2_ISEL_OFFSET; + break; + default: + BUG(); + } + sel = (aprb & mask) >> offset; + + switch (sel) { + case 0: + return &ckih_clk; + case 1: + return &ckih_x2_clk; + } + return &usb_clk; +} + +static unsigned long clk_sdhc_get_rate(struct clk *clk) +{ + u32 div; + + switch (clk->id) { + case 0: + div = CRM_SMALL_DIVIDER(MXC_CRMAP_APRB, SDHC1_DIV); + break; + case 1: + div = CRM_SMALL_DIVIDER(MXC_CRMAP_APRB, SDHC2_DIV); + break; + default: + BUG(); + } + + return clk_get_rate(clk->parent) / div; +} + +static int clk_sdhc_enable(struct clk *clk) +{ + u32 amlpmre1, aprb; + + amlpmre1 = __raw_readl(MXC_CRMAP_AMLPMRE1); + aprb = __raw_readl(MXC_CRMAP_APRB); + switch (clk->id) { + case 0: + amlpmre1 |= (0x7 << MXC_CRMAP_AMLPMRE1_MLPME4_OFFSET); + aprb |= (0x1 << MXC_CRMAP_APRB_SDHC1EN_OFFSET); + break; + case 1: + amlpmre1 |= (0x7 << MXC_CRMAP_AMLPMRE1_MLPME5_OFFSET); + aprb |= (0x1 << MXC_CRMAP_APRB_SDHC2EN_OFFSET); + break; + } + __raw_writel(amlpmre1, MXC_CRMAP_AMLPMRE1); + __raw_writel(aprb, MXC_CRMAP_APRB); + return 0; +} + +static void clk_sdhc_disable(struct clk *clk) +{ + u32 amlpmre1, aprb; + + amlpmre1 = __raw_readl(MXC_CRMAP_AMLPMRE1); + aprb = __raw_readl(MXC_CRMAP_APRB); + switch (clk->id) { + case 0: + amlpmre1 &= ~(0x7 << MXC_CRMAP_AMLPMRE1_MLPME4_OFFSET); + aprb &= ~(0x1 << MXC_CRMAP_APRB_SDHC1EN_OFFSET); + break; + case 1: + amlpmre1 &= ~(0x7 << MXC_CRMAP_AMLPMRE1_MLPME5_OFFSET); + aprb &= ~(0x1 << MXC_CRMAP_APRB_SDHC2EN_OFFSET); + break; + } + __raw_writel(amlpmre1, MXC_CRMAP_AMLPMRE1); + __raw_writel(aprb, MXC_CRMAP_APRB); +} + +static struct clk sdhc_clk[] = { + { + .id = 0, + .get_rate = clk_sdhc_get_rate, + .enable = clk_sdhc_enable, + .disable = clk_sdhc_disable, + }, { + .id = 1, + .get_rate = clk_sdhc_get_rate, + .enable = clk_sdhc_enable, + .disable = clk_sdhc_disable, + }, +}; +/* sdhc_clk stuff end */ + +/* wdog_clk stuff */ +static struct clk wdog_clk[] = { + { + .id = 0, + .parent = &ipg_clk, + .enable_reg = MXC_CRMAP_AMLPMRD, + .enable_shift = MXC_CRMAP_AMLPMRD_MLPMD7_OFFSET, + .enable = _clk_3bit_enable, + .disable = _clk_3bit_disable, + }, { + .id = 1, + .parent = &ipg_clk, + .enable_reg = MXC_CRMAP_AMLPMRD, + .enable_shift = MXC_CRMAP_AMLPMRD_MLPMD3_OFFSET, + .enable = _clk_3bit_enable, + .disable = _clk_3bit_disable, + }, +}; +/* wdog_clk stuff end */ + +/* gpt_clk stuff */ +static struct clk gpt_clk = { + .parent = &ipg_clk, + .enable_reg = MXC_CRMAP_AMLPMRC, + .enable_shift = MXC_CRMAP_AMLPMRC_MLPMC4_OFFSET, + .enable = _clk_3bit_enable, + .disable = _clk_3bit_disable, +}; +/* gpt_clk stuff end */ + +/* cspi_clk stuff */ +static struct clk cspi_clk[] = { + { + .id = 0, + .parent = &ipg_clk, + .enable_reg = MXC_CRMAP_AMLPMRE2, + .enable_shift = MXC_CRMAP_AMLPMRE2_MLPME0_OFFSET, + .enable = _clk_3bit_enable, + .disable = _clk_3bit_disable, + }, { + .id = 1, + .parent = &ipg_clk, + .enable_reg = MXC_CRMAP_AMLPMRE1, + .enable_shift = MXC_CRMAP_AMLPMRE1_MLPME6_OFFSET, + .enable = _clk_3bit_enable, + .disable = _clk_3bit_disable, + }, +}; +/* cspi_clk stuff end */ + +#define _REGISTER_CLOCK(d, n, c) \ + { \ + .dev_id = d, \ + .con_id = n, \ + .clk = &c, \ + }, + +static struct clk_lookup lookups[] = { + _REGISTER_CLOCK("imx-uart.0", NULL, uart_clk[0]) + _REGISTER_CLOCK("imx-uart.1", NULL, uart_clk[1]) + _REGISTER_CLOCK("imx-uart.2", NULL, uart_clk[2]) + _REGISTER_CLOCK("mxc-mmc.0", NULL, sdhc_clk[0]) + _REGISTER_CLOCK("mxc-mmc.1", NULL, sdhc_clk[1]) + _REGISTER_CLOCK("mxc-wdt.0", NULL, wdog_clk[0]) + _REGISTER_CLOCK("spi_imx.0", NULL, cspi_clk[0]) + _REGISTER_CLOCK("spi_imx.1", NULL, cspi_clk[1]) +}; + +int __init mxc91231_clocks_init(unsigned long fref) +{ + void __iomem *gpt_base; + int i; + + ckih_rate = fref; + + usb_clk.parent = clk_usb_parent(&usb_clk); + sdhc_clk[0].parent = clk_sdhc_parent(&sdhc_clk[0]); + sdhc_clk[1].parent = clk_sdhc_parent(&sdhc_clk[1]); + + for (i = 0; i < ARRAY_SIZE(lookups); i++) + clkdev_add(&lookups[i]); + + gpt_base = MXC91231_IO_ADDRESS(MXC91231_GPT1_BASE_ADDR); + mxc_timer_init(&gpt_clk, gpt_base, MXC91231_INT_GPT); + + return 0; +} diff --git a/arch/arm/mach-mxc91231/crm_regs.h b/arch/arm/mach-mxc91231/crm_regs.h new file mode 100644 index 00000000000..ce4f5905818 --- /dev/null +++ b/arch/arm/mach-mxc91231/crm_regs.h @@ -0,0 +1,399 @@ +/* + * Copyright 2006 Freescale Semiconductor, Inc. + * Copyright 2006-2007 Motorola, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + * + */ + +#ifndef _ARCH_ARM_MACH_MXC91231_CRM_REGS_H_ +#define _ARCH_ARM_MACH_MXC91231_CRM_REGS_H_ + +#define CKIL_CLK_FREQ 32768 + +#define MXC_CRM_AP_BASE MXC91231_IO_ADDRESS(MXC91231_CRM_AP_BASE_ADDR) +#define MXC_CRM_COM_BASE MXC91231_IO_ADDRESS(MXC91231_CRM_COM_BASE_ADDR) +#define MXC_DSM_BASE MXC91231_IO_ADDRESS(MXC91231_DSM_BASE_ADDR) +#define MXC_PLL0_BASE MXC91231_IO_ADDRESS(MXC91231_PLL0_BASE_ADDR) +#define MXC_PLL1_BASE MXC91231_IO_ADDRESS(MXC91231_PLL1_BASE_ADDR) +#define MXC_PLL2_BASE MXC91231_IO_ADDRESS(MXC91231_PLL2_BASE_ADDR) +#define MXC_CLKCTL_BASE MXC91231_IO_ADDRESS(MXC91231_CLKCTL_BASE_ADDR) + +/* PLL Register Offsets */ +#define MXC_PLL_DP_CTL 0x00 +#define MXC_PLL_DP_CONFIG 0x04 +#define MXC_PLL_DP_OP 0x08 +#define MXC_PLL_DP_MFD 0x0C +#define MXC_PLL_DP_MFN 0x10 +#define MXC_PLL_DP_HFS_OP 0x1C +#define MXC_PLL_DP_HFS_MFD 0x20 +#define MXC_PLL_DP_HFS_MFN 0x24 + +/* PLL Register Bit definitions */ +#define MXC_PLL_DP_CTL_DPDCK0_2_EN 0x1000 +#define MXC_PLL_DP_CTL_ADE 0x800 +#define MXC_PLL_DP_CTL_REF_CLK_DIV 0x400 +#define MXC_PLL_DP_CTL_HFSM 0x80 +#define MXC_PLL_DP_CTL_PRE 0x40 +#define MXC_PLL_DP_CTL_UPEN 0x20 +#define MXC_PLL_DP_CTL_RST 0x10 +#define MXC_PLL_DP_CTL_RCP 0x8 +#define MXC_PLL_DP_CTL_PLM 0x4 +#define MXC_PLL_DP_CTL_BRM0 0x2 +#define MXC_PLL_DP_CTL_LRF 0x1 + +#define MXC_PLL_DP_OP_MFI_OFFSET 4 +#define MXC_PLL_DP_OP_MFI_MASK 0xF +#define MXC_PLL_DP_OP_PDF_OFFSET 0 +#define MXC_PLL_DP_OP_PDF_MASK 0xF + +#define MXC_PLL_DP_MFD_OFFSET 0 +#define MXC_PLL_DP_MFD_MASK 0x7FFFFFF + +#define MXC_PLL_DP_MFN_OFFSET 0 +#define MXC_PLL_DP_MFN_MASK 0x7FFFFFF + +/* CRM AP Register Offsets */ +#define MXC_CRMAP_ASCSR (MXC_CRM_AP_BASE + 0x00) +#define MXC_CRMAP_ACDR (MXC_CRM_AP_BASE + 0x04) +#define MXC_CRMAP_ACDER1 (MXC_CRM_AP_BASE + 0x08) +#define MXC_CRMAP_ACDER2 (MXC_CRM_AP_BASE + 0x0C) +#define MXC_CRMAP_ACGCR (MXC_CRM_AP_BASE + 0x10) +#define MXC_CRMAP_ACCGCR (MXC_CRM_AP_BASE + 0x14) +#define MXC_CRMAP_AMLPMRA (MXC_CRM_AP_BASE + 0x18) +#define MXC_CRMAP_AMLPMRB (MXC_CRM_AP_BASE + 0x1C) +#define MXC_CRMAP_AMLPMRC (MXC_CRM_AP_BASE + 0x20) +#define MXC_CRMAP_AMLPMRD (MXC_CRM_AP_BASE + 0x24) +#define MXC_CRMAP_AMLPMRE1 (MXC_CRM_AP_BASE + 0x28) +#define MXC_CRMAP_AMLPMRE2 (MXC_CRM_AP_BASE + 0x2C) +#define MXC_CRMAP_AMLPMRF (MXC_CRM_AP_BASE + 0x30) +#define MXC_CRMAP_AMLPMRG (MXC_CRM_AP_BASE + 0x34) +#define MXC_CRMAP_APGCR (MXC_CRM_AP_BASE + 0x38) +#define MXC_CRMAP_ACSR (MXC_CRM_AP_BASE + 0x3C) +#define MXC_CRMAP_ADCR (MXC_CRM_AP_BASE + 0x40) +#define MXC_CRMAP_ACR (MXC_CRM_AP_BASE + 0x44) +#define MXC_CRMAP_AMCR (MXC_CRM_AP_BASE + 0x48) +#define MXC_CRMAP_APCR (MXC_CRM_AP_BASE + 0x4C) +#define MXC_CRMAP_AMORA (MXC_CRM_AP_BASE + 0x50) +#define MXC_CRMAP_AMORB (MXC_CRM_AP_BASE + 0x54) +#define MXC_CRMAP_AGPR (MXC_CRM_AP_BASE + 0x58) +#define MXC_CRMAP_APRA (MXC_CRM_AP_BASE + 0x5C) +#define MXC_CRMAP_APRB (MXC_CRM_AP_BASE + 0x60) +#define MXC_CRMAP_APOR (MXC_CRM_AP_BASE + 0x64) +#define MXC_CRMAP_ADFMR (MXC_CRM_AP_BASE + 0x68) + +/* CRM AP Register Bit definitions */ +#define MXC_CRMAP_ASCSR_CRS 0x10000 +#define MXC_CRMAP_ASCSR_AP_PATDIV2_OFFSET 15 +#define MXC_CRMAP_ASCSR_AP_PATREF_DIV2 0x8000 +#define MXC_CRMAP_ASCSR_USBSEL_OFFSET 13 +#define MXC_CRMAP_ASCSR_USBSEL_MASK (0x3 << 13) +#define MXC_CRMAP_ASCSR_CSISEL_OFFSET 11 +#define MXC_CRMAP_ASCSR_CSISEL_MASK (0x3 << 11) +#define MXC_CRMAP_ASCSR_SSI2SEL_OFFSET 7 +#define MXC_CRMAP_ASCSR_SSI2SEL_MASK (0x3 << 7) +#define MXC_CRMAP_ASCSR_SSI1SEL_OFFSET 5 +#define MXC_CRMAP_ASCSR_SSI1SEL_MASK (0x3 << 5) +#define MXC_CRMAP_ASCSR_APSEL_OFFSET 3 +#define MXC_CRMAP_ASCSR_APSEL_MASK (0x3 << 3) +#define MXC_CRMAP_ASCSR_AP_PATDIV1_OFFSET 2 +#define MXC_CRMAP_ASCSR_AP_PATREF_DIV1 0x4 +#define MXC_CRMAP_ASCSR_APISEL 0x1 + +#define MXC_CRMAP_ACDR_ARMDIV_OFFSET 8 +#define MXC_CRMAP_ACDR_ARMDIV_MASK (0xF << 8) +#define MXC_CRMAP_ACDR_AHBDIV_OFFSET 4 +#define MXC_CRMAP_ACDR_AHBDIV_MASK (0xF << 4) +#define MXC_CRMAP_ACDR_IPDIV_OFFSET 0 +#define MXC_CRMAP_ACDR_IPDIV_MASK 0xF + +#define MXC_CRMAP_ACDER1_CSIEN_OFFSET 30 +#define MXC_CRMAP_ACDER1_CSIDIV_OFFSET 24 +#define MXC_CRMAP_ACDER1_CSIDIV_MASK (0x3F << 24) +#define MXC_CRMAP_ACDER1_SSI2EN_OFFSET 14 +#define MXC_CRMAP_ACDER1_SSI2DIV_OFFSET 8 +#define MXC_CRMAP_ACDER1_SSI2DIV_MASK (0x3F << 8) +#define MXC_CRMAP_ACDER1_SSI1EN_OFFSET 6 +#define MXC_CRMAP_ACDER1_SSI1DIV_OFFSET 0 +#define MXC_CRMAP_ACDER1_SSI1DIV_MASK 0x3F + +#define MXC_CRMAP_ACDER2_CRCT_CLK_DIV_OFFSET 24 +#define MXC_CRMAP_ACDER2_CRCT_CLK_DIV_MASK (0x7 << 24) +#define MXC_CRMAP_ACDER2_NFCEN_OFFSET 20 +#define MXC_CRMAP_ACDER2_NFCDIV_OFFSET 16 +#define MXC_CRMAP_ACDER2_NFCDIV_MASK (0xF << 16) +#define MXC_CRMAP_ACDER2_USBEN_OFFSET 12 +#define MXC_CRMAP_ACDER2_USBDIV_OFFSET 8 +#define MXC_CRMAP_ACDER2_USBDIV_MASK (0xF << 8) +#define MXC_CRMAP_ACDER2_BAUD_ISEL_OFFSET 5 +#define MXC_CRMAP_ACDER2_BAUD_ISEL_MASK (0x3 << 5) +#define MXC_CRMAP_ACDER2_BAUDDIV_OFFSET 0 +#define MXC_CRMAP_ACDER2_BAUDDIV_MASK 0xF + +#define MXC_CRMAP_AMLPMRA_MLPMA7_OFFSET 22 +#define MXC_CRMAP_AMLPMRA_MLPMA7_MASK (0x7 << 22) +#define MXC_CRMAP_AMLPMRA_MLPMA6_OFFSET 19 +#define MXC_CRMAP_AMLPMRA_MLPMA6_MASK (0x7 << 19) +#define MXC_CRMAP_AMLPMRA_MLPMA4_OFFSET 12 +#define MXC_CRMAP_AMLPMRA_MLPMA4_MASK (0x7 << 12) +#define MXC_CRMAP_AMLPMRA_MLPMA3_OFFSET 9 +#define MXC_CRMAP_AMLPMRA_MLPMA3_MASK (0x7 << 9) +#define MXC_CRMAP_AMLPMRA_MLPMA2_OFFSET 6 +#define MXC_CRMAP_AMLPMRA_MLPMA2_MASK (0x7 << 6) +#define MXC_CRMAP_AMLPMRA_MLPMA1_OFFSET 3 +#define MXC_CRMAP_AMLPMRA_MLPMA1_MASK (0x7 << 3) + +#define MXC_CRMAP_AMLPMRB_MLPMB0_OFFSET 0 +#define MXC_CRMAP_AMLPMRB_MLPMB0_MASK 0x7 + +#define MXC_CRMAP_AMLPMRC_MLPMC9_OFFSET 28 +#define MXC_CRMAP_AMLPMRC_MLPMC9_MASK (0x7 << 28) +#define MXC_CRMAP_AMLPMRC_MLPMC7_OFFSET 22 +#define MXC_CRMAP_AMLPMRC_MLPMC7_MASK (0x7 << 22) +#define MXC_CRMAP_AMLPMRC_MLPMC5_OFFSET 16 +#define MXC_CRMAP_AMLPMRC_MLPMC5_MASK (0x7 << 16) +#define MXC_CRMAP_AMLPMRC_MLPMC4_OFFSET 12 +#define MXC_CRMAP_AMLPMRC_MLPMC4_MASK (0x7 << 12) +#define MXC_CRMAP_AMLPMRC_MLPMC3_OFFSET 9 +#define MXC_CRMAP_AMLPMRC_MLPMC3_MASK (0x7 << 9) +#define MXC_CRMAP_AMLPMRC_MLPMC2_OFFSET 6 +#define MXC_CRMAP_AMLPMRC_MLPMC2_MASK (0x7 << 6) +#define MXC_CRMAP_AMLPMRC_MLPMC1_OFFSET 3 +#define MXC_CRMAP_AMLPMRC_MLPMC1_MASK (0x7 << 3) +#define MXC_CRMAP_AMLPMRC_MLPMC0_OFFSET 0 +#define MXC_CRMAP_AMLPMRC_MLPMC0_MASK 0x7 + +#define MXC_CRMAP_AMLPMRD_MLPMD7_OFFSET 22 +#define MXC_CRMAP_AMLPMRD_MLPMD7_MASK (0x7 << 22) +#define MXC_CRMAP_AMLPMRD_MLPMD4_OFFSET 12 +#define MXC_CRMAP_AMLPMRD_MLPMD4_MASK (0x7 << 12) +#define MXC_CRMAP_AMLPMRD_MLPMD3_OFFSET 9 +#define MXC_CRMAP_AMLPMRD_MLPMD3_MASK (0x7 << 9) +#define MXC_CRMAP_AMLPMRD_MLPMD2_OFFSET 6 +#define MXC_CRMAP_AMLPMRD_MLPMD2_MASK (0x7 << 6) +#define MXC_CRMAP_AMLPMRD_MLPMD0_OFFSET 0 +#define MXC_CRMAP_AMLPMRD_MLPMD0_MASK 0x7 + +#define MXC_CRMAP_AMLPMRE1_MLPME9_OFFSET 28 +#define MXC_CRMAP_AMLPMRE1_MLPME9_MASK (0x7 << 28) +#define MXC_CRMAP_AMLPMRE1_MLPME8_OFFSET 25 +#define MXC_CRMAP_AMLPMRE1_MLPME8_MASK (0x7 << 25) +#define MXC_CRMAP_AMLPMRE1_MLPME7_OFFSET 22 +#define MXC_CRMAP_AMLPMRE1_MLPME7_MASK (0x7 << 22) +#define MXC_CRMAP_AMLPMRE1_MLPME6_OFFSET 19 +#define MXC_CRMAP_AMLPMRE1_MLPME6_MASK (0x7 << 19) +#define MXC_CRMAP_AMLPMRE1_MLPME5_OFFSET 16 +#define MXC_CRMAP_AMLPMRE1_MLPME5_MASK (0x7 << 16) +#define MXC_CRMAP_AMLPMRE1_MLPME4_OFFSET 12 +#define MXC_CRMAP_AMLPMRE1_MLPME4_MASK (0x7 << 12) +#define MXC_CRMAP_AMLPMRE1_MLPME3_OFFSET 9 +#define MXC_CRMAP_AMLPMRE1_MLPME3_MASK (0x7 << 9) +#define MXC_CRMAP_AMLPMRE1_MLPME2_OFFSET 6 +#define MXC_CRMAP_AMLPMRE1_MLPME2_MASK (0x7 << 6) +#define MXC_CRMAP_AMLPMRE1_MLPME1_OFFSET 3 +#define MXC_CRMAP_AMLPMRE1_MLPME1_MASK (0x7 << 3) +#define MXC_CRMAP_AMLPMRE1_MLPME0_OFFSET 0 +#define MXC_CRMAP_AMLPMRE1_MLPME0_MASK 0x7 + +#define MXC_CRMAP_AMLPMRE2_MLPME0_OFFSET 0 +#define MXC_CRMAP_AMLPMRE2_MLPME0_MASK 0x7 + +#define MXC_CRMAP_AMLPMRF_MLPMF6_OFFSET 19 +#define MXC_CRMAP_AMLPMRF_MLPMF6_MASK (0x7 << 19) +#define MXC_CRMAP_AMLPMRF_MLPMF5_OFFSET 16 +#define MXC_CRMAP_AMLPMRF_MLPMF5_MASK (0x7 << 16) +#define MXC_CRMAP_AMLPMRF_MLPMF3_OFFSET 9 +#define MXC_CRMAP_AMLPMRF_MLPMF3_MASK (0x7 << 9) +#define MXC_CRMAP_AMLPMRF_MLPMF2_OFFSET 6 +#define MXC_CRMAP_AMLPMRF_MLPMF2_MASK (0x7 << 6) +#define MXC_CRMAP_AMLPMRF_MLPMF1_OFFSET 3 +#define MXC_CRMAP_AMLPMRF_MLPMF1_MASK (0x7 << 3) +#define MXC_CRMAP_AMLPMRF_MLPMF0_OFFSET 0 +#define MXC_CRMAP_AMLPMRF_MLPMF0_MASK (0x7 << 0) + +#define MXC_CRMAP_AMLPMRG_MLPMG9_OFFSET 28 +#define MXC_CRMAP_AMLPMRG_MLPMG9_MASK (0x7 << 28) +#define MXC_CRMAP_AMLPMRG_MLPMG7_OFFSET 22 +#define MXC_CRMAP_AMLPMRG_MLPMG7_MASK (0x7 << 22) +#define MXC_CRMAP_AMLPMRG_MLPMG6_OFFSET 19 +#define MXC_CRMAP_AMLPMRG_MLPMG6_MASK (0x7 << 19) +#define MXC_CRMAP_AMLPMRG_MLPMG5_OFFSET 16 +#define MXC_CRMAP_AMLPMRG_MLPMG5_MASK (0x7 << 16) +#define MXC_CRMAP_AMLPMRG_MLPMG4_OFFSET 12 +#define MXC_CRMAP_AMLPMRG_MLPMG4_MASK (0x7 << 12) +#define MXC_CRMAP_AMLPMRG_MLPMG3_OFFSET 9 +#define MXC_CRMAP_AMLPMRG_MLPMG3_MASK (0x7 << 9) +#define MXC_CRMAP_AMLPMRG_MLPMG2_OFFSET 6 +#define MXC_CRMAP_AMLPMRG_MLPMG2_MASK (0x7 << 6) +#define MXC_CRMAP_AMLPMRG_MLPMG1_OFFSET 3 +#define MXC_CRMAP_AMLPMRG_MLPMG1_MASK (0x7 << 3) +#define MXC_CRMAP_AMLPMRG_MLPMG0_OFFSET 0 +#define MXC_CRMAP_AMLPMRG_MLPMG0_MASK 0x7 + +#define MXC_CRMAP_AGPR_IPUPAD_OFFSET 20 +#define MXC_CRMAP_AGPR_IPUPAD_MASK (0x7 << 20) + +#define MXC_CRMAP_APRA_EL1TEN_OFFSET 29 +#define MXC_CRMAP_APRA_SIMEN_OFFSET 24 +#define MXC_CRMAP_APRA_UART3DIV_OFFSET 17 +#define MXC_CRMAP_APRA_UART3DIV_MASK (0xF << 17) +#define MXC_CRMAP_APRA_UART3EN_OFFSET 16 +#define MXC_CRMAP_APRA_SAHARA_DIV2_CLKEN_OFFSET 14 +#define MXC_CRMAP_APRA_MQSPIEN_OFFSET 13 +#define MXC_CRMAP_APRA_UART2EN_OFFSET 8 +#define MXC_CRMAP_APRA_UART1EN_OFFSET 0 + +#define MXC_CRMAP_APRB_SDHC2_ISEL_OFFSET 13 +#define MXC_CRMAP_APRB_SDHC2_ISEL_MASK (0x7 << 13) +#define MXC_CRMAP_APRB_SDHC2_DIV_OFFSET 9 +#define MXC_CRMAP_APRB_SDHC2_DIV_MASK (0xF << 9) +#define MXC_CRMAP_APRB_SDHC2EN_OFFSET 8 +#define MXC_CRMAP_APRB_SDHC1_ISEL_OFFSET 5 +#define MXC_CRMAP_APRB_SDHC1_ISEL_MASK (0x7 << 5) +#define MXC_CRMAP_APRB_SDHC1_DIV_OFFSET 1 +#define MXC_CRMAP_APRB_SDHC1_DIV_MASK (0xF << 1) +#define MXC_CRMAP_APRB_SDHC1EN_OFFSET 0 + +#define MXC_CRMAP_ACSR_ADS_OFFSET 8 +#define MXC_CRMAP_ACSR_ADS (0x1 << 8) +#define MXC_CRMAP_ACSR_ACS 0x1 + +#define MXC_CRMAP_ADCR_LFDF_0 (0x0 << 8) +#define MXC_CRMAP_ADCR_LFDF_2 (0x1 << 8) +#define MXC_CRMAP_ADCR_LFDF_4 (0x2 << 8) +#define MXC_CRMAP_ADCR_LFDF_8 (0x3 << 8) +#define MXC_CRMAP_ADCR_LFDF_OFFSET 8 +#define MXC_CRMAP_ADCR_LFDF_MASK (0x3 << 8) +#define MXC_CRMAP_ADCR_ALT_PLL 0x80 +#define MXC_CRMAP_ADCR_DFS_DIVEN 0x20 +#define MXC_CRMAP_ADCR_DIV_BYP 0x2 +#define MXC_CRMAP_ADCR_VSTAT 0x8 +#define MXC_CRMAP_ADCR_TSTAT 0x10 +#define MXC_CRMAP_ADCR_DVFS_VCTRL 0x10 +#define MXC_CRMAP_ADCR_CLK_ON 0x40 + +#define MXC_CRMAP_ADFMR_FC_OFFSET 16 +#define MXC_CRMAP_ADFMR_FC_MASK (0x1F << 16) +#define MXC_CRMAP_ADFMR_MF_OFFSET 1 +#define MXC_CRMAP_ADFMR_MF_MASK (0x3FF << 1) +#define MXC_CRMAP_ADFMR_DFM_CLK_READY 0x1 +#define MXC_CRMAP_ADFMR_DFM_PWR_DOWN 0x8000 + +#define MXC_CRMAP_ACR_CKOHS_HIGH (1 << 18) +#define MXC_CRMAP_ACR_CKOS_HIGH (1 << 16) +#define MXC_CRMAP_ACR_CKOHS_MASK (0x7 << 12) +#define MXC_CRMAP_ACR_CKOHD (1 << 11) +#define MXC_CRMAP_ACR_CKOHDIV_MASK (0xF << 8) +#define MXC_CRMAP_ACR_CKOHDIV_OFFSET 8 +#define MXC_CRMAP_ACR_CKOD (1 << 7) +#define MXC_CRMAP_ACR_CKOS_MASK (0x7 << 4) + +/* AP Warm reset */ +#define MXC_CRMAP_AMCR_SW_AP (1 << 14) + +/* Bit definitions of ACGCR in CRM_AP for tree level clock gating */ +#define MXC_CRMAP_ACGCR_ACG0_STOP_WAIT 0x00000001 +#define MXC_CRMAP_ACGCR_ACG0_STOP 0x00000003 +#define MXC_CRMAP_ACGCR_ACG0_RUN 0x00000007 +#define MXC_CRMAP_ACGCR_ACG0_DISABLED 0x00000000 + +#define MXC_CRMAP_ACGCR_ACG1_STOP_WAIT 0x00000008 +#define MXC_CRMAP_ACGCR_ACG1_STOP 0x00000018 +#define MXC_CRMAP_ACGCR_ACG1_RUN 0x00000038 +#define MXC_CRMAP_ACGCR_ACG1_DISABLED 0x00000000 + +#define MXC_CRMAP_ACGCR_ACG2_STOP_WAIT 0x00000040 +#define MXC_CRMAP_ACGCR_ACG2_STOP 0x000000C0 +#define MXC_CRMAP_ACGCR_ACG2_RUN 0x000001C0 +#define MXC_CRMAP_ACGCR_ACG2_DISABLED 0x00000000 + +#define MXC_CRMAP_ACGCR_ACG3_STOP_WAIT 0x00000200 +#define MXC_CRMAP_ACGCR_ACG3_STOP 0x00000600 +#define MXC_CRMAP_ACGCR_ACG3_RUN 0x00000E00 +#define MXC_CRMAP_ACGCR_ACG3_DISABLED 0x00000000 + +#define MXC_CRMAP_ACGCR_ACG4_STOP_WAIT 0x00001000 +#define MXC_CRMAP_ACGCR_ACG4_STOP 0x00003000 +#define MXC_CRMAP_ACGCR_ACG4_RUN 0x00007000 +#define MXC_CRMAP_ACGCR_ACG4_DISABLED 0x00000000 + +#define MXC_CRMAP_ACGCR_ACG5_STOP_WAIT 0x00010000 +#define MXC_CRMAP_ACGCR_ACG5_STOP 0x00030000 +#define MXC_CRMAP_ACGCR_ACG5_RUN 0x00070000 +#define MXC_CRMAP_ACGCR_ACG5_DISABLED 0x00000000 + +#define MXC_CRMAP_ACGCR_ACG6_STOP_WAIT 0x00080000 +#define MXC_CRMAP_ACGCR_ACG6_STOP 0x00180000 +#define MXC_CRMAP_ACGCR_ACG6_RUN 0x00380000 +#define MXC_CRMAP_ACGCR_ACG6_DISABLED 0x00000000 + +#define NUM_GATE_CTRL 6 + +/* CRM COM Register Offsets */ +#define MXC_CRMCOM_CSCR (MXC_CRM_COM_BASE + 0x0C) +#define MXC_CRMCOM_CCCR (MXC_CRM_COM_BASE + 0x10) + +/* CRM COM Bit Definitions */ +#define MXC_CRMCOM_CSCR_PPD1 0x08000000 +#define MXC_CRMCOM_CSCR_CKOHSEL (1 << 18) +#define MXC_CRMCOM_CSCR_CKOSEL (1 << 17) +#define MXC_CRMCOM_CCCR_CC_DIV_OFFSET 8 +#define MXC_CRMCOM_CCCR_CC_DIV_MASK (0x1F << 8) +#define MXC_CRMCOM_CCCR_CC_SEL_OFFSET 0 +#define MXC_CRMCOM_CCCR_CC_SEL_MASK 0x3 + +/* DSM Register Offsets */ +#define MXC_DSM_SLEEP_TIME (MXC_DSM_BASE + 0x0c) +#define MXC_DSM_CONTROL0 (MXC_DSM_BASE + 0x20) +#define MXC_DSM_CONTROL1 (MXC_DSM_BASE + 0x24) +#define MXC_DSM_CTREN (MXC_DSM_BASE + 0x28) +#define MXC_DSM_WARM_PER (MXC_DSM_BASE + 0x40) +#define MXC_DSM_LOCK_PER (MXC_DSM_BASE + 0x44) +#define MXC_DSM_MGPER (MXC_DSM_BASE + 0x4c) +#define MXC_DSM_CRM_CONTROL (MXC_DSM_BASE + 0x50) + +/* Bit definitions of various registers in DSM */ +#define MXC_DSM_CRM_CTRL_DVFS_BYP 0x00000008 +#define MXC_DSM_CRM_CTRL_DVFS_VCTRL 0x00000004 +#define MXC_DSM_CRM_CTRL_LPMD1 0x00000002 +#define MXC_DSM_CRM_CTRL_LPMD0 0x00000001 +#define MXC_DSM_CRM_CTRL_LPMD_STOP_MODE 0x00000000 +#define MXC_DSM_CRM_CTRL_LPMD_WAIT_MODE 0x00000001 +#define MXC_DSM_CRM_CTRL_LPMD_RUN_MODE 0x00000003 +#define MXC_DSM_CONTROL0_STBY_COMMIT_EN 0x00000200 +#define MXC_DSM_CONTROL0_MSTR_EN 0x00000001 +#define MXC_DSM_CONTROL0_RESTART 0x00000010 +/* Counter Block reset */ +#define MXC_DSM_CONTROL1_CB_RST 0x00000002 +/* State Machine reset */ +#define MXC_DSM_CONTROL1_SM_RST 0x00000004 +/* Bit needed to reset counter block */ +#define MXC_CONTROL1_RST_CNT32 0x00000008 +#define MXC_DSM_CONTROL1_RST_CNT32_EN 0x00000800 +#define MXC_DSM_CONTROL1_SLEEP 0x00000100 +#define MXC_DSM_CONTROL1_WAKEUP_DISABLE 0x00004000 +#define MXC_DSM_CTREN_CNT32 0x00000001 + +/* Magic Fix enable bit */ +#define MXC_DSM_MGPER_EN_MGFX 0x80000000 +#define MXC_DSM_MGPER_PER_MASK 0x000003FF +#define MXC_DSM_MGPER_PER(n) (MXC_DSM_MGPER_PER_MASK & n) + +/* Address offsets of the CLKCTL registers */ +#define MXC_CLKCTL_GP_CTRL (MXC_CLKCTL_BASE + 0x00) +#define MXC_CLKCTL_GP_SER (MXC_CLKCTL_BASE + 0x04) +#define MXC_CLKCTL_GP_CER (MXC_CLKCTL_BASE + 0x08) + +#endif /* _ARCH_ARM_MACH_MXC91231_CRM_REGS_H_ */ diff --git a/arch/arm/mach-mxc91231/devices.c b/arch/arm/mach-mxc91231/devices.c new file mode 100644 index 00000000000..353bd977b39 --- /dev/null +++ b/arch/arm/mach-mxc91231/devices.c @@ -0,0 +1,251 @@ +/* + * Copyright 2006-2007 Freescale Semiconductor, Inc. All Rights Reserved. + * Copyright 2008 Sascha Hauer, kernel@pengutronix.de + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version 2 + * of the License, or (at your option) any later version. + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, + * Boston, MA 02110-1301, USA. + */ + +#include +#include +#include +#include +#include +#include +#include + +static struct resource uart0[] = { + { + .start = MXC91231_UART1_BASE_ADDR, + .end = MXC91231_UART1_BASE_ADDR + 0x0B5, + .flags = IORESOURCE_MEM, + }, { + .start = MXC91231_INT_UART1_RX, + .end = MXC91231_INT_UART1_RX, + .flags = IORESOURCE_IRQ, + }, { + .start = MXC91231_INT_UART1_TX, + .end = MXC91231_INT_UART1_TX, + .flags = IORESOURCE_IRQ, + }, { + .start = MXC91231_INT_UART1_MINT, + .end = MXC91231_INT_UART1_MINT, + .flags = IORESOURCE_IRQ, + }, +}; + +struct platform_device mxc_uart_device0 = { + .name = "imx-uart", + .id = 0, + .resource = uart0, + .num_resources = ARRAY_SIZE(uart0), +}; + +static struct resource uart1[] = { + { + .start = MXC91231_UART2_BASE_ADDR, + .end = MXC91231_UART2_BASE_ADDR + 0x0B5, + .flags = IORESOURCE_MEM, + }, { + .start = MXC91231_INT_UART2_RX, + .end = MXC91231_INT_UART2_RX, + .flags = IORESOURCE_IRQ, + }, { + .start = MXC91231_INT_UART2_TX, + .end = MXC91231_INT_UART2_TX, + .flags = IORESOURCE_IRQ, + }, { + .start = MXC91231_INT_UART2_MINT, + .end = MXC91231_INT_UART2_MINT, + .flags = IORESOURCE_IRQ, + }, +}; + +struct platform_device mxc_uart_device1 = { + .name = "imx-uart", + .id = 1, + .resource = uart1, + .num_resources = ARRAY_SIZE(uart1), +}; + +static struct resource uart2[] = { + { + .start = MXC91231_UART3_BASE_ADDR, + .end = MXC91231_UART3_BASE_ADDR + 0x0B5, + .flags = IORESOURCE_MEM, + }, { + .start = MXC91231_INT_UART3_RX, + .end = MXC91231_INT_UART3_RX, + .flags = IORESOURCE_IRQ, + }, { + .start = MXC91231_INT_UART3_TX, + .end = MXC91231_INT_UART3_TX, + .flags = IORESOURCE_IRQ, + }, { + .start = MXC91231_INT_UART3_MINT, + .end = MXC91231_INT_UART3_MINT, + .flags = IORESOURCE_IRQ, + + }, +}; + +struct platform_device mxc_uart_device2 = { + .name = "imx-uart", + .id = 2, + .resource = uart2, + .num_resources = ARRAY_SIZE(uart2), +}; + +/* GPIO port description */ +static struct mxc_gpio_port mxc_gpio_ports[] = { + [0] = { + .chip.label = "gpio-0", + .base = MXC91231_IO_ADDRESS(MXC91231_GPIO1_AP_BASE_ADDR), + .irq = MXC91231_INT_GPIO1, + .virtual_irq_start = MXC_GPIO_IRQ_START, + }, + [1] = { + .chip.label = "gpio-1", + .base = MXC91231_IO_ADDRESS(MXC91231_GPIO2_AP_BASE_ADDR), + .irq = MXC91231_INT_GPIO2, + .virtual_irq_start = MXC_GPIO_IRQ_START + 32, + }, + [2] = { + .chip.label = "gpio-2", + .base = MXC91231_IO_ADDRESS(MXC91231_GPIO3_AP_BASE_ADDR), + .irq = MXC91231_INT_GPIO3, + .virtual_irq_start = MXC_GPIO_IRQ_START + 64, + }, + [3] = { + .chip.label = "gpio-3", + .base = MXC91231_IO_ADDRESS(MXC91231_GPIO4_SH_BASE_ADDR), + .irq = MXC91231_INT_GPIO4, + .virtual_irq_start = MXC_GPIO_IRQ_START + 96, + }, +}; + +int __init mxc_register_gpios(void) +{ + return mxc_gpio_init(mxc_gpio_ports, ARRAY_SIZE(mxc_gpio_ports)); +} + +static struct resource mxc_nand_resources[] = { + { + .start = MXC91231_NFC_BASE_ADDR, + .end = MXC91231_NFC_BASE_ADDR + 0xfff, + .flags = IORESOURCE_MEM + }, { + .start = MXC91231_INT_NANDFC, + .end = MXC91231_INT_NANDFC, + .flags = IORESOURCE_IRQ + }, +}; + +struct platform_device mxc_nand_device = { + .name = "mxc_nand", + .id = 0, + .num_resources = ARRAY_SIZE(mxc_nand_resources), + .resource = mxc_nand_resources, +}; + +static struct resource mxc_sdhc0_resources[] = { + { + .start = MXC91231_MMC_SDHC1_BASE_ADDR, + .end = MXC91231_MMC_SDHC1_BASE_ADDR + SZ_16K - 1, + .flags = IORESOURCE_MEM, + }, { + .start = MXC91231_INT_MMC_SDHC1, + .end = MXC91231_INT_MMC_SDHC1, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct resource mxc_sdhc1_resources[] = { + { + .start = MXC91231_MMC_SDHC2_BASE_ADDR, + .end = MXC91231_MMC_SDHC2_BASE_ADDR + SZ_16K - 1, + .flags = IORESOURCE_MEM, + }, { + .start = MXC91231_INT_MMC_SDHC2, + .end = MXC91231_INT_MMC_SDHC2, + .flags = IORESOURCE_IRQ, + }, +}; + +struct platform_device mxc_sdhc_device0 = { + .name = "mxc-mmc", + .id = 0, + .num_resources = ARRAY_SIZE(mxc_sdhc0_resources), + .resource = mxc_sdhc0_resources, +}; + +struct platform_device mxc_sdhc_device1 = { + .name = "mxc-mmc", + .id = 1, + .num_resources = ARRAY_SIZE(mxc_sdhc1_resources), + .resource = mxc_sdhc1_resources, +}; + +static struct resource mxc_cspi0_resources[] = { + { + .start = MXC91231_CSPI1_BASE_ADDR, + .end = MXC91231_CSPI1_BASE_ADDR + 0x20, + .flags = IORESOURCE_MEM, + }, { + .start = MXC91231_INT_CSPI1, + .end = MXC91231_INT_CSPI1, + .flags = IORESOURCE_IRQ, + }, +}; + +struct platform_device mxc_cspi_device0 = { + .name = "spi_imx", + .id = 0, + .num_resources = ARRAY_SIZE(mxc_cspi0_resources), + .resource = mxc_cspi0_resources, +}; + +static struct resource mxc_cspi1_resources[] = { + { + .start = MXC91231_CSPI2_BASE_ADDR, + .end = MXC91231_CSPI2_BASE_ADDR + 0x20, + .flags = IORESOURCE_MEM, + }, { + .start = MXC91231_INT_CSPI2, + .end = MXC91231_INT_CSPI2, + .flags = IORESOURCE_IRQ, + }, +}; + +struct platform_device mxc_cspi_device1 = { + .name = "spi_imx", + .id = 1, + .num_resources = ARRAY_SIZE(mxc_cspi1_resources), + .resource = mxc_cspi1_resources, +}; + +static struct resource mxc_wdog0_resources[] = { + { + .start = MXC91231_WDOG1_BASE_ADDR, + .end = MXC91231_WDOG1_BASE_ADDR + 0x10, + .flags = IORESOURCE_MEM, + }, +}; + +struct platform_device mxc_wdog_device0 = { + .name = "mxc-wdt", + .id = 0, + .num_resources = ARRAY_SIZE(mxc_wdog0_resources), + .resource = mxc_wdog0_resources, +}; diff --git a/arch/arm/mach-mxc91231/devices.h b/arch/arm/mach-mxc91231/devices.h new file mode 100644 index 00000000000..72a2136ce27 --- /dev/null +++ b/arch/arm/mach-mxc91231/devices.h @@ -0,0 +1,13 @@ +extern struct platform_device mxc_uart_device0; +extern struct platform_device mxc_uart_device1; +extern struct platform_device mxc_uart_device2; + +extern struct platform_device mxc_nand_device; + +extern struct platform_device mxc_sdhc_device0; +extern struct platform_device mxc_sdhc_device1; + +extern struct platform_device mxc_cspi_device0; +extern struct platform_device mxc_cspi_device1; + +extern struct platform_device mxc_wdog_device0; diff --git a/arch/arm/mach-mxc91231/magx-zn5.c b/arch/arm/mach-mxc91231/magx-zn5.c new file mode 100644 index 00000000000..8757573b0a8 --- /dev/null +++ b/arch/arm/mach-mxc91231/magx-zn5.c @@ -0,0 +1,59 @@ +/* + * Copyright 2009 Dmitriy Taychenachev + * + * This file is released under the GPLv2 or later. + */ + +#include +#include +#include + +#include +#include +#include + +#include +#include +#include +#include + +#include "devices.h" + +static struct imxuart_platform_data uart_pdata = { +}; + +static struct imxmmc_platform_data sdhc_pdata = { +}; + +static void __init zn5_init(void) +{ + pm_power_off = mxc91231_power_off; + + mxc_register_device(&mxc_uart_device1, &uart_pdata); + mxc_register_device(&mxc_uart_device0, &uart_pdata); + + mxc_register_device(&mxc_sdhc_device0, &sdhc_pdata); + + mxc_register_device(&mxc_wdog_device0, NULL); + + return; +} + +static void __init zn5_timer_init(void) +{ + mxc91231_clocks_init(26000000); /* 26mhz ckih */ +} + +struct sys_timer zn5_timer = { + .init = zn5_timer_init, +}; + +MACHINE_START(MAGX_ZN5, "Motorola Zn5") + .phys_io = MXC91231_AIPS1_BASE_ADDR, + .io_pg_offst = ((MXC91231_AIPS1_BASE_ADDR_VIRT) >> 18) & 0xfffc, + .boot_params = PHYS_OFFSET + 0x100, + .map_io = mxc91231_map_io, + .init_irq = mxc91231_init_irq, + .timer = &zn5_timer, + .init_machine = zn5_init, +MACHINE_END diff --git a/arch/arm/mach-mxc91231/mm.c b/arch/arm/mach-mxc91231/mm.c new file mode 100644 index 00000000000..6becda3ff33 --- /dev/null +++ b/arch/arm/mach-mxc91231/mm.c @@ -0,0 +1,94 @@ +/* + * Copyright (C) 1999,2000 Arm Limited + * Copyright (C) 2000 Deep Blue Solutions Ltd + * Copyright (C) 2002 Shane Nay (shane@minirl.com) + * Copyright 2004-2005 Freescale Semiconductor, Inc. All Rights Reserved. + * - add MXC specific definitions + * Copyright 2006 Motorola, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + * + */ + +#include +#include +#include +#include +#include +#include + +/* + * This structure defines the MXC memory map. + */ +static struct map_desc mxc_io_desc[] __initdata = { + { + .virtual = MXC91231_L2CC_BASE_ADDR_VIRT, + .pfn = __phys_to_pfn(MXC91231_L2CC_BASE_ADDR), + .length = MXC91231_L2CC_SIZE, + .type = MT_DEVICE, + }, { + .virtual = MXC91231_X_MEMC_BASE_ADDR_VIRT, + .pfn = __phys_to_pfn(MXC91231_X_MEMC_BASE_ADDR), + .length = MXC91231_X_MEMC_SIZE, + .type = MT_DEVICE, + }, { + .virtual = MXC91231_ROMP_BASE_ADDR_VIRT, + .pfn = __phys_to_pfn(MXC91231_ROMP_BASE_ADDR), + .length = MXC91231_ROMP_SIZE, + .type = MT_DEVICE, + }, { + .virtual = MXC91231_AVIC_BASE_ADDR_VIRT, + .pfn = __phys_to_pfn(MXC91231_AVIC_BASE_ADDR), + .length = MXC91231_AVIC_SIZE, + .type = MT_DEVICE, + }, { + .virtual = MXC91231_AIPS1_BASE_ADDR_VIRT, + .pfn = __phys_to_pfn(MXC91231_AIPS1_BASE_ADDR), + .length = MXC91231_AIPS1_SIZE, + .type = MT_DEVICE, + }, { + .virtual = MXC91231_SPBA0_BASE_ADDR_VIRT, + .pfn = __phys_to_pfn(MXC91231_SPBA0_BASE_ADDR), + .length = MXC91231_SPBA0_SIZE, + .type = MT_DEVICE, + }, { + .virtual = MXC91231_SPBA1_BASE_ADDR_VIRT, + .pfn = __phys_to_pfn(MXC91231_SPBA1_BASE_ADDR), + .length = MXC91231_SPBA1_SIZE, + .type = MT_DEVICE, + }, { + .virtual = MXC91231_AIPS2_BASE_ADDR_VIRT, + .pfn = __phys_to_pfn(MXC91231_AIPS2_BASE_ADDR), + .length = MXC91231_AIPS2_SIZE, + .type = MT_DEVICE, + }, +}; + +/* + * This function initializes the memory map. It is called during the + * system startup to create static physical to virtual memory map for + * the IO modules. + */ +void __init mxc91231_map_io(void) +{ + mxc_set_cpu_type(MXC_CPU_MXC91231); + + iotable_init(mxc_io_desc, ARRAY_SIZE(mxc_io_desc)); +} + +void __init mxc91231_init_irq(void) +{ + mxc_init_irq(MXC91231_IO_ADDRESS(MXC91231_AVIC_BASE_ADDR)); +} diff --git a/arch/arm/mach-mxc91231/system.c b/arch/arm/mach-mxc91231/system.c new file mode 100644 index 00000000000..736f7efd874 --- /dev/null +++ b/arch/arm/mach-mxc91231/system.c @@ -0,0 +1,51 @@ +/* + * Copyright 2009 Dmitriy Taychenachev + * + * This file is released under the GPLv2 or later. + */ + +#include +#include + +#include +#include + +#include "crm_regs.h" + +#define WDOG_WCR MXC91231_IO_ADDRESS(MXC91231_WDOG1_BASE_ADDR) +#define WDOG_WCR_OUT_ENABLE (1 << 6) +#define WDOG_WCR_ASSERT (1 << 5) + +void mxc91231_power_off(void) +{ + u16 wcr; + + wcr = __raw_readw(WDOG_WCR); + wcr |= WDOG_WCR_OUT_ENABLE; + wcr &= ~WDOG_WCR_ASSERT; + __raw_writew(wcr, WDOG_WCR); +} + +void mxc91231_arch_reset(char mode, const char *cmd) +{ + u32 amcr; + + /* Reset the AP using CRM */ + amcr = __raw_readl(MXC_CRMAP_AMCR); + amcr &= ~MXC_CRMAP_AMCR_SW_AP; + __raw_writel(amcr, MXC_CRMAP_AMCR); + + mdelay(10); + cpu_reset(0); +} + +void mxc91231_prepare_idle(void) +{ + u32 crm_ctl; + + /* Go to WAIT mode after WFI */ + crm_ctl = __raw_readl(MXC_DSM_CRM_CONTROL); + crm_ctl &= ~(MXC_DSM_CRM_CTRL_LPMD0 | MXC_DSM_CRM_CTRL_LPMD1); + crm_ctl |= MXC_DSM_CRM_CTRL_LPMD_WAIT_MODE; + __raw_writel(crm_ctl, MXC_DSM_CRM_CONTROL); +} diff --git a/arch/arm/plat-mxc/Kconfig b/arch/arm/plat-mxc/Kconfig index e342a2e6160..ca5c7c22634 100644 --- a/arch/arm/plat-mxc/Kconfig +++ b/arch/arm/plat-mxc/Kconfig @@ -34,12 +34,20 @@ config ARCH_MX3 help This enables support for systems based on the Freescale i.MX3 family +config ARCH_MXC91231 + bool "MXC91231-based" + select CPU_V6 + select COMMON_CLKDEV + help + This enables support for systems based on the Freescale MXC91231 family + endchoice source "arch/arm/mach-mx1/Kconfig" source "arch/arm/mach-mx2/Kconfig" source "arch/arm/mach-mx3/Kconfig" source "arch/arm/mach-mx25/Kconfig" +source "arch/arm/mach-mxc91231/Kconfig" endmenu diff --git a/arch/arm/plat-mxc/include/mach/common.h b/arch/arm/plat-mxc/include/mach/common.h index 4e7af741239..286cb9b0a25 100644 --- a/arch/arm/plat-mxc/include/mach/common.h +++ b/arch/arm/plat-mxc/include/mach/common.h @@ -20,6 +20,7 @@ extern void mx25_map_io(void); extern void mx27_map_io(void); extern void mx31_map_io(void); extern void mx35_map_io(void); +extern void mxc91231_map_io(void); extern void mxc_init_irq(void __iomem *); extern void mx1_init_irq(void); extern void mx21_init_irq(void); @@ -27,6 +28,7 @@ extern void mx25_init_irq(void); extern void mx27_init_irq(void); extern void mx31_init_irq(void); extern void mx35_init_irq(void); +extern void mxc91231_init_irq(void); extern void mxc_timer_init(struct clk *timer_clk, void __iomem *, int); extern int mx1_clocks_init(unsigned long fref); extern int mx21_clocks_init(unsigned long lref, unsigned long fref); @@ -34,9 +36,13 @@ extern int mx25_clocks_init(unsigned long fref); extern int mx27_clocks_init(unsigned long fref); extern int mx31_clocks_init(unsigned long fref); extern int mx35_clocks_init(void); +extern int mxc91231_clocks_init(unsigned long fref); extern int mxc_register_gpios(void); extern int mxc_register_device(struct platform_device *pdev, void *data); extern void mxc_set_cpu_type(unsigned int type); extern void mxc_arch_reset_init(void __iomem *); +extern void mxc91231_power_off(void); +extern void mxc91231_arch_reset(int, const char *); +extern void mxc91231_prepare_idle(void); #endif diff --git a/arch/arm/plat-mxc/include/mach/debug-macro.S b/arch/arm/plat-mxc/include/mach/debug-macro.S index bf683de56b7..15b2b148a10 100644 --- a/arch/arm/plat-mxc/include/mach/debug-macro.S +++ b/arch/arm/plat-mxc/include/mach/debug-macro.S @@ -44,6 +44,14 @@ #define UART_VADDR AIPS1_IO_ADDRESS(UART1_BASE_ADDR) #endif +#ifdef CONFIG_ARCH_MXC91231 +#ifdef UART_PADDR +#error "CONFIG_DEBUG_LL is incompatible with multiple archs" +#endif +#include +#define UART_PADDR MXC91231_UART2_BASE_ADDR +#define UART_VADDR MXC91231_AIPS1_IO_ADDRESS(MXC91231_UART2_BASE_ADDR) +#endif .macro addruart,rx mrc p15, 0, \rx, c1, c0 tst \rx, #1 @ MMU enabled? diff --git a/arch/arm/plat-mxc/include/mach/hardware.h b/arch/arm/plat-mxc/include/mach/hardware.h index 569af3239c3..78db75475f6 100644 --- a/arch/arm/plat-mxc/include/mach/hardware.h +++ b/arch/arm/plat-mxc/include/mach/hardware.h @@ -46,6 +46,10 @@ # include #endif +#ifdef CONFIG_ARCH_MXC91231 +# include +#endif + #include #endif /* __ASM_ARCH_MXC_HARDWARE_H__ */ diff --git a/arch/arm/plat-mxc/include/mach/irqs.h b/arch/arm/plat-mxc/include/mach/irqs.h index f39e016c1cc..ead9d592168 100644 --- a/arch/arm/plat-mxc/include/mach/irqs.h +++ b/arch/arm/plat-mxc/include/mach/irqs.h @@ -26,6 +26,8 @@ #define MXC_GPIO_IRQS (32 * 3) #elif defined CONFIG_ARCH_MX25 #define MXC_GPIO_IRQS (32 * 4) +#elif defined CONFIG_ARCH_MXC91231 +#define MXC_GPIO_IRQS (32 * 4) #endif /* diff --git a/arch/arm/plat-mxc/include/mach/memory.h b/arch/arm/plat-mxc/include/mach/memory.h index 42db7394111..d3afafdcc0e 100644 --- a/arch/arm/plat-mxc/include/mach/memory.h +++ b/arch/arm/plat-mxc/include/mach/memory.h @@ -24,6 +24,8 @@ #define PHYS_OFFSET UL(0x80000000) #elif defined CONFIG_ARCH_MX25 #define PHYS_OFFSET UL(0x80000000) +#elif defined CONFIG_ARCH_MXC91231 +#define PHYS_OFFSET UL(0x90000000) #endif #if defined(CONFIG_MX1_VIDEO) diff --git a/arch/arm/plat-mxc/include/mach/mxc.h b/arch/arm/plat-mxc/include/mach/mxc.h index 882b816729b..51990536b84 100644 --- a/arch/arm/plat-mxc/include/mach/mxc.h +++ b/arch/arm/plat-mxc/include/mach/mxc.h @@ -30,6 +30,7 @@ #define MXC_CPU_MX27 27 #define MXC_CPU_MX31 31 #define MXC_CPU_MX35 35 +#define MXC_CPU_MXC91231 91231 #ifndef __ASSEMBLY__ extern unsigned int __mxc_cpu_type; @@ -107,13 +108,25 @@ extern unsigned int __mxc_cpu_type; # define cpu_is_mx35() (0) #endif +#ifdef CONFIG_ARCH_MXC91231 +# ifdef mxc_cpu_type +# undef mxc_cpu_type +# define mxc_cpu_type __mxc_cpu_type +# else +# define mxc_cpu_type MXC_CPU_MXC91231 +# endif +# define cpu_is_mxc91231() (mxc_cpu_type == MXC_CPU_MXC91231) +#else +# define cpu_is_mxc91231() (0) +#endif + #if defined(CONFIG_ARCH_MX3) || defined(CONFIG_ARCH_MX2) #define CSCR_U(n) (IO_ADDRESS(WEIM_BASE_ADDR) + n * 0x10) #define CSCR_L(n) (IO_ADDRESS(WEIM_BASE_ADDR) + n * 0x10 + 0x4) #define CSCR_A(n) (IO_ADDRESS(WEIM_BASE_ADDR) + n * 0x10 + 0x8) #endif -#define cpu_is_mx3() (cpu_is_mx31() || cpu_is_mx35()) +#define cpu_is_mx3() (cpu_is_mx31() || cpu_is_mx35() || cpu_is_mxc91231()) #define cpu_is_mx2() (cpu_is_mx21() || cpu_is_mx27()) #endif /* __ASM_ARCH_MXC_H__ */ diff --git a/arch/arm/plat-mxc/include/mach/mxc91231.h b/arch/arm/plat-mxc/include/mach/mxc91231.h new file mode 100644 index 00000000000..81484d1ef23 --- /dev/null +++ b/arch/arm/plat-mxc/include/mach/mxc91231.h @@ -0,0 +1,315 @@ +/* + * Copyright 2004-2006 Freescale Semiconductor, Inc. All Rights Reserved. + * - Platform specific register memory map + * + * Copyright 2005-2007 Motorola, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ +#ifndef __MACH_MXC91231_H__ +#define __MACH_MXC91231_H__ + +/* + * L2CC + */ +#define MXC91231_L2CC_BASE_ADDR 0x30000000 +#define MXC91231_L2CC_BASE_ADDR_VIRT 0xF9000000 +#define MXC91231_L2CC_SIZE SZ_64K + +/* + * AIPS 1 + */ +#define MXC91231_AIPS1_BASE_ADDR 0x43F00000 +#define MXC91231_AIPS1_BASE_ADDR_VIRT 0xFC000000 +#define MXC91231_AIPS1_SIZE SZ_1M + +#define MXC91231_AIPS1_CTRL_BASE_ADDR MXC91231_AIPS1_BASE_ADDR +#define MXC91231_MAX_BASE_ADDR (MXC91231_AIPS1_BASE_ADDR + 0x04000) +#define MXC91231_EVTMON_BASE_ADDR (MXC91231_AIPS1_BASE_ADDR + 0x08000) +#define MXC91231_CLKCTL_BASE_ADDR (MXC91231_AIPS1_BASE_ADDR + 0x0C000) +#define MXC91231_ETB_SLOT4_BASE_ADDR (MXC91231_AIPS1_BASE_ADDR + 0x10000) +#define MXC91231_ETB_SLOT5_BASE_ADDR (MXC91231_AIPS1_BASE_ADDR + 0x14000) +#define MXC91231_ECT_CTIO_BASE_ADDR (MXC91231_AIPS1_BASE_ADDR + 0x18000) +#define MXC91231_I2C_BASE_ADDR (MXC91231_AIPS1_BASE_ADDR + 0x80000) +#define MXC91231_MU_BASE_ADDR (MXC91231_AIPS1_BASE_ADDR + 0x88000) +#define MXC91231_UART1_BASE_ADDR (MXC91231_AIPS1_BASE_ADDR + 0x90000) +#define MXC91231_UART2_BASE_ADDR (MXC91231_AIPS1_BASE_ADDR + 0x94000) +#define MXC91231_DSM_BASE_ADDR (MXC91231_AIPS1_BASE_ADDR + 0x98000) +#define MXC91231_OWIRE_BASE_ADDR (MXC91231_AIPS1_BASE_ADDR + 0x9C000) +#define MXC91231_SSI1_BASE_ADDR (MXC91231_AIPS1_BASE_ADDR + 0xA0000) +#define MXC91231_KPP_BASE_ADDR (MXC91231_AIPS1_BASE_ADDR + 0xA8000) +#define MXC91231_IOMUX_AP_BASE_ADDR (MXC91231_AIPS1_BASE_ADDR + 0xAC000) +#define MXC91231_CTI_AP_BASE_ADDR (MXC91231_AIPS1_BASE_ADDR + 0xB8000) + +/* + * AIPS 2 + */ +#define MXC91231_AIPS2_BASE_ADDR 0x53F00000 +#define MXC91231_AIPS2_BASE_ADDR_VIRT 0xFC100000 +#define MXC91231_AIPS2_SIZE SZ_1M + +#define MXC91231_GEMK_BASE_ADDR (MXC91231_AIPS2_BASE_ADDR + 0x8C000) +#define MXC91231_GPT1_BASE_ADDR (MXC91231_AIPS2_BASE_ADDR + 0x90000) +#define MXC91231_EPIT1_AP_BASE_ADDR (MXC91231_AIPS2_BASE_ADDR + 0x94000) +#define MXC91231_SCC_BASE_ADDR (MXC91231_AIPS2_BASE_ADDR + 0xAC000) +#define MXC91231_RNGA_BASE_ADDR (MXC91231_AIPS2_BASE_ADDR + 0xB0000) +#define MXC91231_IPU_CTRL_BASE_ADDR (MXC91231_AIPS2_BASE_ADDR + 0xC0000) +#define MXC91231_AUDMUX_BASE_ADDR (MXC91231_AIPS2_BASE_ADDR + 0xC4000) +#define MXC91231_EDIO_BASE_ADDR (MXC91231_AIPS2_BASE_ADDR + 0xC8000) +#define MXC91231_GPIO1_AP_BASE_ADDR (MXC91231_AIPS2_BASE_ADDR + 0xCC000) +#define MXC91231_GPIO2_AP_BASE_ADDR (MXC91231_AIPS2_BASE_ADDR + 0xD0000) +#define MXC91231_SDMA_BASE_ADDR (MXC91231_AIPS2_BASE_ADDR + 0xD4000) +#define MXC91231_RTC_BASE_ADDR (MXC91231_AIPS2_BASE_ADDR + 0xD8000) +#define MXC91231_WDOG1_BASE_ADDR (MXC91231_AIPS2_BASE_ADDR + 0xDC000) +#define MXC91231_PWM_BASE_ADDR (MXC91231_AIPS2_BASE_ADDR + 0xE0000) +#define MXC91231_GPIO3_AP_BASE_ADDR (MXC91231_AIPS2_BASE_ADDR + 0xE4000) +#define MXC91231_WDOG2_BASE_ADDR (MXC91231_AIPS2_BASE_ADDR + 0xE8000) +#define MXC91231_RTIC_BASE_ADDR (MXC91231_AIPS2_BASE_ADDR + 0xEC000) +#define MXC91231_LPMC_BASE_ADDR (MXC91231_AIPS2_BASE_ADDR + 0xF0000) + +/* + * SPBA global module 0 + */ +#define MXC91231_SPBA0_BASE_ADDR 0x50000000 +#define MXC91231_SPBA0_BASE_ADDR_VIRT 0xFC200000 +#define MXC91231_SPBA0_SIZE SZ_1M + +#define MXC91231_MMC_SDHC1_BASE_ADDR (MXC91231_SPBA0_BASE_ADDR + 0x04000) +#define MXC91231_MMC_SDHC2_BASE_ADDR (MXC91231_SPBA0_BASE_ADDR + 0x08000) +#define MXC91231_UART3_BASE_ADDR (MXC91231_SPBA0_BASE_ADDR + 0x0C000) +#define MXC91231_CSPI2_BASE_ADDR (MXC91231_SPBA0_BASE_ADDR + 0x10000) +#define MXC91231_SSI2_BASE_ADDR (MXC91231_SPBA0_BASE_ADDR + 0x14000) +#define MXC91231_SIM_BASE_ADDR (MXC91231_SPBA0_BASE_ADDR + 0x18000) +#define MXC91231_IIM_BASE_ADDR (MXC91231_SPBA0_BASE_ADDR + 0x1C000) +#define MXC91231_CTI_SDMA_BASE_ADDR (MXC91231_SPBA0_BASE_ADDR + 0x20000) +#define MXC91231_USBOTG_CTRL_BASE_ADDR (MXC91231_SPBA0_BASE_ADDR + 0x24000) +#define MXC91231_USBOTG_DATA_BASE_ADDR (MXC91231_SPBA0_BASE_ADDR + 0x28000) +#define MXC91231_CSPI1_BASE_ADDR (MXC91231_SPBA0_BASE_ADDR + 0x30000) +#define MXC91231_SPBA_CTRL_BASE_ADDR (MXC91231_SPBA0_BASE_ADDR + 0x3C000) +#define MXC91231_IOMUX_COM_BASE_ADDR (MXC91231_SPBA0_BASE_ADDR + 0x40000) +#define MXC91231_CRM_COM_BASE_ADDR (MXC91231_SPBA0_BASE_ADDR + 0x44000) +#define MXC91231_CRM_AP_BASE_ADDR (MXC91231_SPBA0_BASE_ADDR + 0x48000) +#define MXC91231_PLL0_BASE_ADDR (MXC91231_SPBA0_BASE_ADDR + 0x4C000) +#define MXC91231_PLL1_BASE_ADDR (MXC91231_SPBA0_BASE_ADDR + 0x50000) +#define MXC91231_PLL2_BASE_ADDR (MXC91231_SPBA0_BASE_ADDR + 0x54000) +#define MXC91231_GPIO4_SH_BASE_ADDR (MXC91231_SPBA0_BASE_ADDR + 0x58000) +#define MXC91231_HAC_BASE_ADDR (MXC91231_SPBA0_BASE_ADDR + 0x5C000) +#define MXC91231_SAHARA_BASE_ADDR (MXC91231_SPBA0_BASE_ADDR + 0x5C000) +#define MXC91231_PLL3_BASE_ADDR (MXC91231_SPBA0_BASE_ADDR + 0x60000) + +/* + * SPBA global module 1 + */ +#define MXC91231_SPBA1_BASE_ADDR 0x52000000 +#define MXC91231_SPBA1_BASE_ADDR_VIRT 0xFC300000 +#define MXC91231_SPBA1_SIZE SZ_1M + +#define MXC91231_MQSPI_BASE_ADDR (MXC91231_SPBA1_BASE_ADDR + 0x34000) +#define MXC91231_EL1T_BASE_ADDR (MXC91231_SPBA1_BASE_ADDR + 0x38000) + +/*! + * Defines for SPBA modules + */ +#define MXC91231_SPBA_SDHC1 0x04 +#define MXC91231_SPBA_SDHC2 0x08 +#define MXC91231_SPBA_UART3 0x0C +#define MXC91231_SPBA_CSPI2 0x10 +#define MXC91231_SPBA_SSI2 0x14 +#define MXC91231_SPBA_SIM 0x18 +#define MXC91231_SPBA_IIM 0x1C +#define MXC91231_SPBA_CTI_SDMA 0x20 +#define MXC91231_SPBA_USBOTG_CTRL_REGS 0x24 +#define MXC91231_SPBA_USBOTG_DATA_REGS 0x28 +#define MXC91231_SPBA_CSPI1 0x30 +#define MXC91231_SPBA_MQSPI 0x34 +#define MXC91231_SPBA_EL1T 0x38 +#define MXC91231_SPBA_IOMUX 0x40 +#define MXC91231_SPBA_CRM_COM 0x44 +#define MXC91231_SPBA_CRM_AP 0x48 +#define MXC91231_SPBA_PLL0 0x4C +#define MXC91231_SPBA_PLL1 0x50 +#define MXC91231_SPBA_PLL2 0x54 +#define MXC91231_SPBA_GPIO4 0x58 +#define MXC91231_SPBA_SAHARA 0x5C + +/* + * ROMP and AVIC + */ +#define MXC91231_ROMP_BASE_ADDR 0x60000000 +#define MXC91231_ROMP_BASE_ADDR_VIRT 0xFC400000 +#define MXC91231_ROMP_SIZE SZ_64K + +#define MXC91231_AVIC_BASE_ADDR 0x68000000 +#define MXC91231_AVIC_BASE_ADDR_VIRT 0xFC410000 +#define MXC91231_AVIC_SIZE SZ_64K + +/* + * NAND, SDRAM, WEIM, M3IF, EMI controllers + */ +#define MXC91231_X_MEMC_BASE_ADDR 0xB8000000 +#define MXC91231_X_MEMC_BASE_ADDR_VIRT 0xFC420000 +#define MXC91231_X_MEMC_SIZE SZ_64K + +#define MXC91231_NFC_BASE_ADDR (MXC91231_X_MEMC_BASE_ADDR + 0x0000) +#define MXC91231_ESDCTL_BASE_ADDR (MXC91231_X_MEMC_BASE_ADDR + 0x1000) +#define MXC91231_WEIM_BASE_ADDR (MXC91231_X_MEMC_BASE_ADDR + 0x2000) +#define MXC91231_M3IF_BASE_ADDR (MXC91231_X_MEMC_BASE_ADDR + 0x3000) +#define MXC91231_EMI_CTL_BASE_ADDR (MXC91231_X_MEMC_BASE_ADDR + 0x4000) + +/* + * Memory regions and CS + * CPLD is connected on CS4 + * CS5 is TP1021 or it is not connected + * */ +#define MXC91231_FB_RAM_BASE_ADDR 0x78000000 +#define MXC91231_FB_RAM_SIZE SZ_256K +#define MXC91231_CSD0_BASE_ADDR 0x80000000 +#define MXC91231_CSD1_BASE_ADDR 0x90000000 +#define MXC91231_CS0_BASE_ADDR 0xA0000000 +#define MXC91231_CS1_BASE_ADDR 0xA8000000 +#define MXC91231_CS2_BASE_ADDR 0xB0000000 +#define MXC91231_CS3_BASE_ADDR 0xB2000000 +#define MXC91231_CS4_BASE_ADDR 0xB4000000 +#define MXC91231_CS5_BASE_ADDR 0xB6000000 + +/* Is given address belongs to the specified memory region? */ +#define ADDRESS_IN_REGION(addr, start, size) \ + (((addr) >= (start)) && ((addr) < (start)+(size))) + +/* Is given address belongs to the specified named `module'? */ +#define MXC91231_IS_MODULE(addr, module) \ + ADDRESS_IN_REGION(addr, MXC91231_ ## module ## _BASE_ADDR, \ + MXC91231_ ## module ## _SIZE) +/* + * This macro defines the physical to virtual address mapping for all the + * peripheral modules. It is used by passing in the physical address as x + * and returning the virtual address. If the physical address is not mapped, + * it returns 0xDEADBEEF + */ + +#define MXC91231_IO_ADDRESS(x) \ + (void __iomem *) \ + (MXC91231_IS_MODULE(x, L2CC) ? MXC91231_L2CC_IO_ADDRESS(x) : \ + MXC91231_IS_MODULE(x, AIPS1) ? MXC91231_AIPS1_IO_ADDRESS(x) : \ + MXC91231_IS_MODULE(x, AIPS2) ? MXC91231_AIPS2_IO_ADDRESS(x) : \ + MXC91231_IS_MODULE(x, SPBA0) ? MXC91231_SPBA0_IO_ADDRESS(x) : \ + MXC91231_IS_MODULE(x, SPBA1) ? MXC91231_SPBA1_IO_ADDRESS(x) : \ + MXC91231_IS_MODULE(x, ROMP) ? MXC91231_ROMP_IO_ADDRESS(x) : \ + MXC91231_IS_MODULE(x, AVIC) ? MXC91231_AVIC_IO_ADDRESS(x) : \ + MXC91231_IS_MODULE(x, X_MEMC) ? MXC91231_X_MEMC_IO_ADDRESS(x) : \ + 0xDEADBEEF) + + +/* + * define the address mapping macros: in physical address order + */ +#define MXC91231_L2CC_IO_ADDRESS(x) \ + (((x) - MXC91231_L2CC_BASE_ADDR) + MXC91231_L2CC_BASE_ADDR_VIRT) + +#define MXC91231_AIPS1_IO_ADDRESS(x) \ + (((x) - MXC91231_AIPS1_BASE_ADDR) + MXC91231_AIPS1_BASE_ADDR_VIRT) + +#define MXC91231_SPBA0_IO_ADDRESS(x) \ + (((x) - MXC91231_SPBA0_BASE_ADDR) + MXC91231_SPBA0_BASE_ADDR_VIRT) + +#define MXC91231_SPBA1_IO_ADDRESS(x) \ + (((x) - MXC91231_SPBA1_BASE_ADDR) + MXC91231_SPBA1_BASE_ADDR_VIRT) + +#define MXC91231_AIPS2_IO_ADDRESS(x) \ + (((x) - MXC91231_AIPS2_BASE_ADDR) + MXC91231_AIPS2_BASE_ADDR_VIRT) + +#define MXC91231_ROMP_IO_ADDRESS(x) \ + (((x) - MXC91231_ROMP_BASE_ADDR) + MXC91231_ROMP_BASE_ADDR_VIRT) + +#define MXC91231_AVIC_IO_ADDRESS(x) \ + (((x) - MXC91231_AVIC_BASE_ADDR) + MXC91231_AVIC_BASE_ADDR_VIRT) + +#define MXC91231_X_MEMC_IO_ADDRESS(x) \ + (((x) - MXC91231_X_MEMC_BASE_ADDR) + MXC91231_X_MEMC_BASE_ADDR_VIRT) + +/* + * Interrupt numbers + */ +#define MXC91231_INT_GPIO3 0 +#define MXC91231_INT_EL1T_CI 1 +#define MXC91231_INT_EL1T_RFCI 2 +#define MXC91231_INT_EL1T_RFI 3 +#define MXC91231_INT_EL1T_MCU 4 +#define MXC91231_INT_EL1T_IPI 5 +#define MXC91231_INT_MU_GEN 6 +#define MXC91231_INT_GPIO4 7 +#define MXC91231_INT_MMC_SDHC2 8 +#define MXC91231_INT_MMC_SDHC1 9 +#define MXC91231_INT_I2C 10 +#define MXC91231_INT_SSI2 11 +#define MXC91231_INT_SSI1 12 +#define MXC91231_INT_CSPI2 13 +#define MXC91231_INT_CSPI1 14 +#define MXC91231_INT_RTIC 15 +#define MXC91231_INT_SAHARA 15 +#define MXC91231_INT_HAC 15 +#define MXC91231_INT_UART3_RX 16 +#define MXC91231_INT_UART3_TX 17 +#define MXC91231_INT_UART3_MINT 18 +#define MXC91231_INT_ECT 19 +#define MXC91231_INT_SIM_IPB 20 +#define MXC91231_INT_SIM_DATA 21 +#define MXC91231_INT_RNGA 22 +#define MXC91231_INT_DSM_AP 23 +#define MXC91231_INT_KPP 24 +#define MXC91231_INT_RTC 25 +#define MXC91231_INT_PWM 26 +#define MXC91231_INT_GEMK_AP 27 +#define MXC91231_INT_EPIT 28 +#define MXC91231_INT_GPT 29 +#define MXC91231_INT_UART2_RX 30 +#define MXC91231_INT_UART2_TX 31 +#define MXC91231_INT_UART2_MINT 32 +#define MXC91231_INT_NANDFC 33 +#define MXC91231_INT_SDMA 34 +#define MXC91231_INT_USB_WAKEUP 35 +#define MXC91231_INT_USB_SOF 36 +#define MXC91231_INT_PMU_EVTMON 37 +#define MXC91231_INT_USB_FUNC 38 +#define MXC91231_INT_USB_DMA 39 +#define MXC91231_INT_USB_CTRL 40 +#define MXC91231_INT_IPU_ERR 41 +#define MXC91231_INT_IPU_SYN 42 +#define MXC91231_INT_UART1_RX 43 +#define MXC91231_INT_UART1_TX 44 +#define MXC91231_INT_UART1_MINT 45 +#define MXC91231_INT_IIM 46 +#define MXC91231_INT_MU_RX_OR 47 +#define MXC91231_INT_MU_TX_OR 48 +#define MXC91231_INT_SCC_SCM 49 +#define MXC91231_INT_SCC_SMN 50 +#define MXC91231_INT_GPIO2 51 +#define MXC91231_INT_GPIO1 52 +#define MXC91231_INT_MQSPI1 53 +#define MXC91231_INT_MQSPI2 54 +#define MXC91231_INT_WDOG2 55 +#define MXC91231_INT_EXT_INT7 56 +#define MXC91231_INT_EXT_INT6 57 +#define MXC91231_INT_EXT_INT5 58 +#define MXC91231_INT_EXT_INT4 59 +#define MXC91231_INT_EXT_INT3 60 +#define MXC91231_INT_EXT_INT2 61 +#define MXC91231_INT_EXT_INT1 62 +#define MXC91231_INT_EXT_INT0 63 + +#define MXC91231_MAX_INT_LINES 63 +#define MXC91231_MAX_EXT_LINES 8 + +#endif /* __MACH_MXC91231_H__ */ diff --git a/arch/arm/plat-mxc/include/mach/system.h b/arch/arm/plat-mxc/include/mach/system.h index e56241af870..ef00199568d 100644 --- a/arch/arm/plat-mxc/include/mach/system.h +++ b/arch/arm/plat-mxc/include/mach/system.h @@ -21,8 +21,18 @@ #ifndef __ASM_ARCH_MXC_SYSTEM_H__ #define __ASM_ARCH_MXC_SYSTEM_H__ +#include +#include + static inline void arch_idle(void) { +#ifdef CONFIG_ARCH_MXC91231 + if (cpu_is_mxc91231()) { + /* Need this to set DSM low-power mode */ + mxc91231_prepare_idle(); + } +#endif + cpu_do_idle(); } diff --git a/arch/arm/plat-mxc/include/mach/timex.h b/arch/arm/plat-mxc/include/mach/timex.h index 0707b7d5b5c..527a6c24788 100644 --- a/arch/arm/plat-mxc/include/mach/timex.h +++ b/arch/arm/plat-mxc/include/mach/timex.h @@ -28,6 +28,8 @@ #define CLOCK_TICK_RATE 16625000 #elif defined CONFIG_ARCH_MX25 #define CLOCK_TICK_RATE 16000000 +#elif defined CONFIG_ARCH_MXC91231 +#define CLOCK_TICK_RATE 13000000 #endif #endif /* __ASM_ARCH_MXC_TIMEX_H__ */ diff --git a/arch/arm/plat-mxc/include/mach/uncompress.h b/arch/arm/plat-mxc/include/mach/uncompress.h index 1e24499f20b..082a3908256 100644 --- a/arch/arm/plat-mxc/include/mach/uncompress.h +++ b/arch/arm/plat-mxc/include/mach/uncompress.h @@ -66,6 +66,7 @@ static void putc(int ch) #define MX25_UART1_BASE_ADDR 0x43f90000 #define MX2X_UART1_BASE_ADDR 0x1000a000 #define MX3X_UART1_BASE_ADDR 0x43F90000 +#define MX3X_UART2_BASE_ADDR 0x43F94000 static __inline__ void __arch_decomp_setup(unsigned long arch_id) { @@ -95,6 +96,9 @@ static __inline__ void __arch_decomp_setup(unsigned long arch_id) case MACH_TYPE_PCM043: uart_base = MX3X_UART1_BASE_ADDR; break; + case MACH_TYPE_MAGX_ZN5: + uart_base = MX3X_UART2_BASE_ADDR; + break; default: break; } diff --git a/arch/arm/plat-mxc/system.c b/arch/arm/plat-mxc/system.c index 15e30532f4a..97f42799fa5 100644 --- a/arch/arm/plat-mxc/system.c +++ b/arch/arm/plat-mxc/system.c @@ -27,6 +27,7 @@ #include #include +#include #include #include @@ -39,6 +40,12 @@ void arch_reset(char mode, const char *cmd) { unsigned int wcr_enable; +#ifdef CONFIG_ARCH_MXC91231 + if (cpu_is_mxc91231()) { + mxc91231_arch_reset(mode, cmd); + return; + } +#endif if (cpu_is_mx1()) { wcr_enable = (1 << 0); } else { diff --git a/arch/arm/plat-mxc/time.c b/arch/arm/plat-mxc/time.c index 59e33a3bf7f..844567ee35f 100644 --- a/arch/arm/plat-mxc/time.c +++ b/arch/arm/plat-mxc/time.c @@ -47,7 +47,7 @@ #define MX2_TSTAT_CAPT (1 << 1) #define MX2_TSTAT_COMP (1 << 0) -/* MX31, MX35, MX25 */ +/* MX31, MX35, MX25, MXC91231 */ #define MX3_TCTL_WAITEN (1 << 3) #define MX3_TCTL_CLK_IPG (1 << 6) #define MX3_TCTL_FRR (1 << 9) -- cgit v1.2.3 From 94da274b4982f5b36b55bde0c76d3ef8233bceda Mon Sep 17 00:00:00 2001 From: Dmitriy Taychenachev Date: Fri, 31 Jul 2009 20:29:23 +0900 Subject: MXC: add iomux pins configuration support for MXC91231 Signed-off-by: Dmitriy Taychenachev Signed-off-by: Sascha Hauer --- arch/arm/mach-mxc91231/Makefile | 2 +- arch/arm/mach-mxc91231/iomux.c | 177 +++++++++++++++ arch/arm/mach-mxc91231/magx-zn5.c | 4 + arch/arm/plat-mxc/include/mach/iomux-mxc91231.h | 287 ++++++++++++++++++++++++ 4 files changed, 469 insertions(+), 1 deletion(-) create mode 100644 arch/arm/mach-mxc91231/iomux.c create mode 100644 arch/arm/plat-mxc/include/mach/iomux-mxc91231.h diff --git a/arch/arm/mach-mxc91231/Makefile b/arch/arm/mach-mxc91231/Makefile index eb70b669c55..011d5e19712 100644 --- a/arch/arm/mach-mxc91231/Makefile +++ b/arch/arm/mach-mxc91231/Makefile @@ -1,2 +1,2 @@ -obj-y := mm.o clock.o devices.o system.o +obj-y := mm.o clock.o devices.o system.o iomux.o obj-$(CONFIG_MACH_MAGX_ZN5) += magx-zn5.o diff --git a/arch/arm/mach-mxc91231/iomux.c b/arch/arm/mach-mxc91231/iomux.c new file mode 100644 index 00000000000..405d9b19d89 --- /dev/null +++ b/arch/arm/mach-mxc91231/iomux.c @@ -0,0 +1,177 @@ +/* + * Copyright 2004-2006 Freescale Semiconductor, Inc. All Rights Reserved. + * Copyright (C) 2008 by Sascha Hauer + * Copyright (C) 2009 by Valentin Longchamp + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version 2 + * of the License, or (at your option) any later version. + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, + * MA 02110-1301, USA. + */ + +#include +#include +#include +#include +#include +#include +#include + +/* + * IOMUX register (base) addresses + */ +#define IOMUX_AP_BASE MXC91231_IO_ADDRESS(MXC91231_IOMUX_AP_BASE_ADDR) +#define IOMUX_COM_BASE MXC91231_IO_ADDRESS(MXC91231_IOMUX_COM_BASE_ADDR) +#define IOMUXSW_AP_MUX_CTL (IOMUX_AP_BASE + 0x000) +#define IOMUXSW_SP_MUX_CTL (IOMUX_COM_BASE + 0x000) +#define IOMUXSW_PAD_CTL (IOMUX_COM_BASE + 0x200) + +#define IOMUXINT_OBS1 (IOMUX_AP_BASE + 0x600) +#define IOMUXINT_OBS2 (IOMUX_AP_BASE + 0x004) + +static DEFINE_SPINLOCK(gpio_mux_lock); + +#define NB_PORTS ((PIN_MAX + 32) / 32) +#define PIN_GLOBAL_NUM(pin) \ + (((pin & MUX_SIDE_MASK) >> MUX_SIDE_SHIFT)*PIN_AP_MAX + \ + ((pin & MUX_REG_MASK) >> MUX_REG_SHIFT)*4 + \ + ((pin & MUX_FIELD_MASK) >> MUX_FIELD_SHIFT)) + +unsigned long mxc_pin_alloc_map[NB_PORTS * 32 / BITS_PER_LONG]; +/* + * set the mode for a IOMUX pin. + */ +int mxc_iomux_mode(const unsigned int pin_mode) +{ + u32 side, field, l, mode, ret = 0; + void __iomem *reg; + + side = (pin_mode & MUX_SIDE_MASK) >> MUX_SIDE_SHIFT; + switch (side) { + case MUX_SIDE_AP: + reg = IOMUXSW_AP_MUX_CTL; + break; + case MUX_SIDE_SP: + reg = IOMUXSW_SP_MUX_CTL; + break; + default: + return -EINVAL; + } + reg += ((pin_mode & MUX_REG_MASK) >> MUX_REG_SHIFT) * 4; + field = (pin_mode & MUX_FIELD_MASK) >> MUX_FIELD_SHIFT; + mode = (pin_mode & MUX_MODE_MASK) >> MUX_MODE_SHIFT; + + spin_lock(&gpio_mux_lock); + + l = __raw_readl(reg); + l &= ~(0xff << (field * 8)); + l |= mode << (field * 8); + __raw_writel(l, reg); + + spin_unlock(&gpio_mux_lock); + + return ret; +} +EXPORT_SYMBOL(mxc_iomux_mode); + +/* + * This function configures the pad value for a IOMUX pin. + */ +void mxc_iomux_set_pad(enum iomux_pins pin, u32 config) +{ + u32 padgrp, field, l; + void __iomem *reg; + + padgrp = (pin & MUX_PADGRP_MASK) >> MUX_PADGRP_SHIFT; + reg = IOMUXSW_PAD_CTL + (pin + 2) / 3 * 4; + field = (pin + 2) % 3; + + pr_debug("%s: reg offset = 0x%x, field = %d\n", + __func__, (pin + 2) / 3, field); + + spin_lock(&gpio_mux_lock); + + l = __raw_readl(reg); + l &= ~(0x1ff << (field * 10)); + l |= config << (field * 10); + __raw_writel(l, reg); + + spin_unlock(&gpio_mux_lock); +} +EXPORT_SYMBOL(mxc_iomux_set_pad); + +/* + * allocs a single pin: + * - reserves the pin so that it is not claimed by another driver + * - setups the iomux according to the configuration + */ +int mxc_iomux_alloc_pin(const unsigned int pin_mode, const char *label) +{ + unsigned pad = PIN_GLOBAL_NUM(pin_mode); + if (pad >= (PIN_MAX + 1)) { + printk(KERN_ERR "mxc_iomux: Attempt to request nonexistant pin %u for \"%s\"\n", + pad, label ? label : "?"); + return -EINVAL; + } + + if (test_and_set_bit(pad, mxc_pin_alloc_map)) { + printk(KERN_ERR "mxc_iomux: pin %u already used. Allocation for \"%s\" failed\n", + pad, label ? label : "?"); + return -EBUSY; + } + mxc_iomux_mode(pin_mode); + + return 0; +} +EXPORT_SYMBOL(mxc_iomux_alloc_pin); + +int mxc_iomux_setup_multiple_pins(unsigned int *pin_list, unsigned count, + const char *label) +{ + unsigned int *p = pin_list; + int i; + int ret = -EINVAL; + + for (i = 0; i < count; i++) { + ret = mxc_iomux_alloc_pin(*p, label); + if (ret) + goto setup_error; + p++; + } + return 0; + +setup_error: + mxc_iomux_release_multiple_pins(pin_list, i); + return ret; +} +EXPORT_SYMBOL(mxc_iomux_setup_multiple_pins); + +void mxc_iomux_release_pin(const unsigned int pin_mode) +{ + unsigned pad = PIN_GLOBAL_NUM(pin_mode); + + if (pad < (PIN_MAX + 1)) + clear_bit(pad, mxc_pin_alloc_map); +} +EXPORT_SYMBOL(mxc_iomux_release_pin); + +void mxc_iomux_release_multiple_pins(unsigned int *pin_list, int count) +{ + unsigned int *p = pin_list; + int i; + + for (i = 0; i < count; i++) { + mxc_iomux_release_pin(*p); + p++; + } +} +EXPORT_SYMBOL(mxc_iomux_release_multiple_pins); diff --git a/arch/arm/mach-mxc91231/magx-zn5.c b/arch/arm/mach-mxc91231/magx-zn5.c index 8757573b0a8..7dbe4ca12ef 100644 --- a/arch/arm/mach-mxc91231/magx-zn5.c +++ b/arch/arm/mach-mxc91231/magx-zn5.c @@ -14,6 +14,7 @@ #include #include +#include #include #include @@ -29,6 +30,9 @@ static void __init zn5_init(void) { pm_power_off = mxc91231_power_off; + mxc_iomux_alloc_pin(MXC91231_PIN_SP_USB_DAT_VP__RXD2, "uart2-rx"); + mxc_iomux_alloc_pin(MXC91231_PIN_SP_USB_SE0_VM__TXD2, "uart2-tx"); + mxc_register_device(&mxc_uart_device1, &uart_pdata); mxc_register_device(&mxc_uart_device0, &uart_pdata); diff --git a/arch/arm/plat-mxc/include/mach/iomux-mxc91231.h b/arch/arm/plat-mxc/include/mach/iomux-mxc91231.h new file mode 100644 index 00000000000..9f13061192c --- /dev/null +++ b/arch/arm/plat-mxc/include/mach/iomux-mxc91231.h @@ -0,0 +1,287 @@ +/* + * Copyright 2004-2006 Freescale Semiconductor, Inc. All Rights Reserved. + * Copyright (C) 2008 by Sascha Hauer + * Copyright (C) 2009 by Dmitriy Taychenachev + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#ifndef __MACH_IOMUX_MXC91231_H__ +#define __MACH_IOMUX_MXC91231_H__ + +/* + * various IOMUX output functions + */ + +#define IOMUX_OCONFIG_GPIO (0 << 4) /* used as GPIO */ +#define IOMUX_OCONFIG_FUNC (1 << 4) /* used as function */ +#define IOMUX_OCONFIG_ALT1 (2 << 4) /* used as alternate function 1 */ +#define IOMUX_OCONFIG_ALT2 (3 << 4) /* used as alternate function 2 */ +#define IOMUX_OCONFIG_ALT3 (4 << 4) /* used as alternate function 3 */ +#define IOMUX_OCONFIG_ALT4 (5 << 4) /* used as alternate function 4 */ +#define IOMUX_OCONFIG_ALT5 (6 << 4) /* used as alternate function 5 */ +#define IOMUX_OCONFIG_ALT6 (7 << 4) /* used as alternate function 6 */ +#define IOMUX_ICONFIG_NONE 0 /* not configured for input */ +#define IOMUX_ICONFIG_GPIO 1 /* used as GPIO */ +#define IOMUX_ICONFIG_FUNC 2 /* used as function */ +#define IOMUX_ICONFIG_ALT1 4 /* used as alternate function 1 */ +#define IOMUX_ICONFIG_ALT2 8 /* used as alternate function 2 */ + +#define IOMUX_CONFIG_GPIO (IOMUX_OCONFIG_GPIO | IOMUX_ICONFIG_GPIO) +#define IOMUX_CONFIG_FUNC (IOMUX_OCONFIG_FUNC | IOMUX_ICONFIG_FUNC) +#define IOMUX_CONFIG_ALT1 (IOMUX_OCONFIG_ALT1 | IOMUX_ICONFIG_ALT1) +#define IOMUX_CONFIG_ALT2 (IOMUX_OCONFIG_ALT2 | IOMUX_ICONFIG_ALT2) + +/* + * setups a single pin: + * - reserves the pin so that it is not claimed by another driver + * - setups the iomux according to the configuration + * - if the pin is configured as a GPIO, we claim it throug kernel gpiolib + */ +int mxc_iomux_alloc_pin(const unsigned int pin_mode, const char *label); +/* + * setups mutliple pins + * convenient way to call the above function with tables + */ +int mxc_iomux_setup_multiple_pins(unsigned int *pin_list, unsigned count, + const char *label); + +/* + * releases a single pin: + * - make it available for a future use by another driver + * - frees the GPIO if the pin was configured as GPIO + * - DOES NOT reconfigure the IOMUX in its reset state + */ +void mxc_iomux_release_pin(const unsigned int pin_mode); +/* + * releases multiple pins + * convenvient way to call the above function with tables + */ +void mxc_iomux_release_multiple_pins(unsigned int *pin_list, int count); + +#define MUX_SIDE_AP (0) +#define MUX_SIDE_SP (1) + +#define MUX_SIDE_SHIFT (26) +#define MUX_SIDE_MASK (0x1 << MUX_SIDE_SHIFT) + +#define MUX_GPIO_PORT_SHIFT (23) +#define MUX_GPIO_PORT_MASK (0x7 << MUX_GPIO_PORT_SHIFT) + +#define MUX_GPIO_PIN_SHIFT (20) +#define MUX_GPIO_PIN_MASK (0x1f << MUX_GPIO_PIN_SHIFT) + +#define MUX_REG_SHIFT (15) +#define MUX_REG_MASK (0x1f << MUX_REG_SHIFT) + +#define MUX_FIELD_SHIFT (13) +#define MUX_FIELD_MASK (0x3 << MUX_FIELD_SHIFT) + +#define MUX_PADGRP_SHIFT (8) +#define MUX_PADGRP_MASK (0x1f << MUX_PADGRP_SHIFT) + +#define MUX_PIN_MASK (0xffffff << 8) + +#define GPIO_PORT_MAX (3) + +#define IOMUX_PIN(side, gport, gpin, ctlreg, ctlfield, padgrp) \ + (((side) << MUX_SIDE_SHIFT) | \ + (gport << MUX_GPIO_PORT_SHIFT) | \ + ((gpin) << MUX_GPIO_PIN_SHIFT) | \ + ((ctlreg) << MUX_REG_SHIFT) | \ + ((ctlfield) << MUX_FIELD_SHIFT) | \ + ((padgrp) << MUX_PADGRP_SHIFT)) + +#define MUX_MODE_OUT_SHIFT (4) +#define MUX_MODE_IN_SHIFT (0) +#define MUX_MODE_SHIFT (0) +#define MUX_MODE_MASK (0xff << MUX_MODE_SHIFT) + +#define IOMUX_MODE(pin, mode) \ + (pin | (mode << MUX_MODE_SHIFT)) + +enum iomux_pins { + /* AP Side pins */ + MXC91231_PIN_AP_CLE = IOMUX_PIN(0, 0, 0, 0, 0, 24), + MXC91231_PIN_AP_ALE = IOMUX_PIN(0, 0, 1, 0, 1, 24), + MXC91231_PIN_AP_CE_B = IOMUX_PIN(0, 0, 2, 0, 2, 24), + MXC91231_PIN_AP_RE_B = IOMUX_PIN(0, 0, 3, 0, 3, 24), + MXC91231_PIN_AP_WE_B = IOMUX_PIN(0, 0, 4, 1, 0, 24), + MXC91231_PIN_AP_WP_B = IOMUX_PIN(0, 0, 5, 1, 1, 24), + MXC91231_PIN_AP_BSY_B = IOMUX_PIN(0, 0, 6, 1, 2, 24), + MXC91231_PIN_AP_U1_TXD = IOMUX_PIN(0, 0, 7, 1, 3, 28), + MXC91231_PIN_AP_U1_RXD = IOMUX_PIN(0, 0, 8, 2, 0, 28), + MXC91231_PIN_AP_U1_RTS_B = IOMUX_PIN(0, 0, 9, 2, 1, 28), + MXC91231_PIN_AP_U1_CTS_B = IOMUX_PIN(0, 0, 10, 2, 2, 28), + MXC91231_PIN_AP_AD1_TXD = IOMUX_PIN(0, 0, 11, 2, 3, 9), + MXC91231_PIN_AP_AD1_RXD = IOMUX_PIN(0, 0, 12, 3, 0, 9), + MXC91231_PIN_AP_AD1_TXC = IOMUX_PIN(0, 0, 13, 3, 1, 9), + MXC91231_PIN_AP_AD1_TXFS = IOMUX_PIN(0, 0, 14, 3, 2, 9), + MXC91231_PIN_AP_AD2_TXD = IOMUX_PIN(0, 0, 15, 3, 3, 9), + MXC91231_PIN_AP_AD2_RXD = IOMUX_PIN(0, 0, 16, 4, 0, 9), + MXC91231_PIN_AP_AD2_TXC = IOMUX_PIN(0, 0, 17, 4, 1, 9), + MXC91231_PIN_AP_AD2_TXFS = IOMUX_PIN(0, 0, 18, 4, 2, 9), + MXC91231_PIN_AP_OWDAT = IOMUX_PIN(0, 0, 19, 4, 3, 28), + MXC91231_PIN_AP_IPU_LD17 = IOMUX_PIN(0, 0, 20, 5, 0, 28), + MXC91231_PIN_AP_IPU_D3_VSYNC = IOMUX_PIN(0, 0, 21, 5, 1, 28), + MXC91231_PIN_AP_IPU_D3_HSYNC = IOMUX_PIN(0, 0, 22, 5, 2, 28), + MXC91231_PIN_AP_IPU_D3_CLK = IOMUX_PIN(0, 0, 23, 5, 3, 28), + MXC91231_PIN_AP_IPU_D3_DRDY = IOMUX_PIN(0, 0, 24, 6, 0, 28), + MXC91231_PIN_AP_IPU_D3_CONTR = IOMUX_PIN(0, 0, 25, 6, 1, 28), + MXC91231_PIN_AP_IPU_D0_CS = IOMUX_PIN(0, 0, 26, 6, 2, 28), + MXC91231_PIN_AP_IPU_LD16 = IOMUX_PIN(0, 0, 27, 6, 3, 28), + MXC91231_PIN_AP_IPU_D2_CS = IOMUX_PIN(0, 0, 28, 7, 0, 28), + MXC91231_PIN_AP_IPU_PAR_RS = IOMUX_PIN(0, 0, 29, 7, 1, 28), + MXC91231_PIN_AP_IPU_D3_PS = IOMUX_PIN(0, 0, 30, 7, 2, 28), + MXC91231_PIN_AP_IPU_D3_CLS = IOMUX_PIN(0, 0, 31, 7, 3, 28), + MXC91231_PIN_AP_IPU_RD = IOMUX_PIN(0, 1, 0, 8, 0, 28), + MXC91231_PIN_AP_IPU_WR = IOMUX_PIN(0, 1, 1, 8, 1, 28), + MXC91231_PIN_AP_IPU_LD0 = IOMUX_PIN(0, 7, 0, 8, 2, 28), + MXC91231_PIN_AP_IPU_LD1 = IOMUX_PIN(0, 7, 0, 8, 3, 28), + MXC91231_PIN_AP_IPU_LD2 = IOMUX_PIN(0, 7, 0, 9, 0, 28), + MXC91231_PIN_AP_IPU_LD3 = IOMUX_PIN(0, 1, 2, 9, 1, 28), + MXC91231_PIN_AP_IPU_LD4 = IOMUX_PIN(0, 1, 3, 9, 2, 28), + MXC91231_PIN_AP_IPU_LD5 = IOMUX_PIN(0, 1, 4, 9, 3, 28), + MXC91231_PIN_AP_IPU_LD6 = IOMUX_PIN(0, 1, 5, 10, 0, 28), + MXC91231_PIN_AP_IPU_LD7 = IOMUX_PIN(0, 1, 6, 10, 1, 28), + MXC91231_PIN_AP_IPU_LD8 = IOMUX_PIN(0, 1, 7, 10, 2, 28), + MXC91231_PIN_AP_IPU_LD9 = IOMUX_PIN(0, 1, 8, 10, 3, 28), + MXC91231_PIN_AP_IPU_LD10 = IOMUX_PIN(0, 1, 9, 11, 0, 28), + MXC91231_PIN_AP_IPU_LD11 = IOMUX_PIN(0, 1, 10, 11, 1, 28), + MXC91231_PIN_AP_IPU_LD12 = IOMUX_PIN(0, 1, 11, 11, 2, 28), + MXC91231_PIN_AP_IPU_LD13 = IOMUX_PIN(0, 1, 12, 11, 3, 28), + MXC91231_PIN_AP_IPU_LD14 = IOMUX_PIN(0, 1, 13, 12, 0, 28), + MXC91231_PIN_AP_IPU_LD15 = IOMUX_PIN(0, 1, 14, 12, 1, 28), + MXC91231_PIN_AP_KPROW4 = IOMUX_PIN(0, 7, 0, 12, 2, 10), + MXC91231_PIN_AP_KPROW5 = IOMUX_PIN(0, 1, 16, 12, 3, 10), + MXC91231_PIN_AP_GPIO_AP_B17 = IOMUX_PIN(0, 1, 17, 13, 0, 10), + MXC91231_PIN_AP_GPIO_AP_B18 = IOMUX_PIN(0, 1, 18, 13, 1, 10), + MXC91231_PIN_AP_KPCOL3 = IOMUX_PIN(0, 1, 19, 13, 2, 11), + MXC91231_PIN_AP_KPCOL4 = IOMUX_PIN(0, 1, 20, 13, 3, 11), + MXC91231_PIN_AP_KPCOL5 = IOMUX_PIN(0, 1, 21, 14, 0, 11), + MXC91231_PIN_AP_GPIO_AP_B22 = IOMUX_PIN(0, 1, 22, 14, 1, 11), + MXC91231_PIN_AP_GPIO_AP_B23 = IOMUX_PIN(0, 1, 23, 14, 2, 11), + MXC91231_PIN_AP_CSI_D0 = IOMUX_PIN(0, 1, 24, 14, 3, 21), + MXC91231_PIN_AP_CSI_D1 = IOMUX_PIN(0, 1, 25, 15, 0, 21), + MXC91231_PIN_AP_CSI_D2 = IOMUX_PIN(0, 1, 26, 15, 1, 21), + MXC91231_PIN_AP_CSI_D3 = IOMUX_PIN(0, 1, 27, 15, 2, 21), + MXC91231_PIN_AP_CSI_D4 = IOMUX_PIN(0, 1, 28, 15, 3, 21), + MXC91231_PIN_AP_CSI_D5 = IOMUX_PIN(0, 1, 29, 16, 0, 21), + MXC91231_PIN_AP_CSI_D6 = IOMUX_PIN(0, 1, 30, 16, 1, 21), + MXC91231_PIN_AP_CSI_D7 = IOMUX_PIN(0, 1, 31, 16, 2, 21), + MXC91231_PIN_AP_CSI_D8 = IOMUX_PIN(0, 2, 0, 16, 3, 21), + MXC91231_PIN_AP_CSI_D9 = IOMUX_PIN(0, 2, 1, 17, 0, 21), + MXC91231_PIN_AP_CSI_MCLK = IOMUX_PIN(0, 2, 2, 17, 1, 21), + MXC91231_PIN_AP_CSI_VSYNC = IOMUX_PIN(0, 2, 3, 17, 2, 21), + MXC91231_PIN_AP_CSI_HSYNC = IOMUX_PIN(0, 2, 4, 17, 3, 21), + MXC91231_PIN_AP_CSI_PIXCLK = IOMUX_PIN(0, 2, 5, 18, 0, 21), + MXC91231_PIN_AP_I2CLK = IOMUX_PIN(0, 2, 6, 18, 1, 12), + MXC91231_PIN_AP_I2DAT = IOMUX_PIN(0, 2, 7, 18, 2, 12), + MXC91231_PIN_AP_GPIO_AP_C8 = IOMUX_PIN(0, 2, 8, 18, 3, 9), + MXC91231_PIN_AP_GPIO_AP_C9 = IOMUX_PIN(0, 2, 9, 19, 0, 9), + MXC91231_PIN_AP_GPIO_AP_C10 = IOMUX_PIN(0, 2, 10, 19, 1, 9), + MXC91231_PIN_AP_GPIO_AP_C11 = IOMUX_PIN(0, 2, 11, 19, 2, 9), + MXC91231_PIN_AP_GPIO_AP_C12 = IOMUX_PIN(0, 2, 12, 19, 3, 9), + MXC91231_PIN_AP_GPIO_AP_C13 = IOMUX_PIN(0, 2, 13, 20, 0, 28), + MXC91231_PIN_AP_GPIO_AP_C14 = IOMUX_PIN(0, 2, 14, 20, 1, 28), + MXC91231_PIN_AP_GPIO_AP_C15 = IOMUX_PIN(0, 2, 15, 20, 2, 9), + MXC91231_PIN_AP_GPIO_AP_C16 = IOMUX_PIN(0, 2, 16, 20, 3, 9), + MXC91231_PIN_AP_GPIO_AP_C17 = IOMUX_PIN(0, 2, 17, 21, 0, 9), + MXC91231_PIN_AP_ED_INT0 = IOMUX_PIN(0, 2, 18, 21, 1, 22), + MXC91231_PIN_AP_ED_INT1 = IOMUX_PIN(0, 2, 19, 21, 2, 22), + MXC91231_PIN_AP_ED_INT2 = IOMUX_PIN(0, 2, 20, 21, 3, 22), + MXC91231_PIN_AP_ED_INT3 = IOMUX_PIN(0, 2, 21, 22, 0, 22), + MXC91231_PIN_AP_ED_INT4 = IOMUX_PIN(0, 2, 22, 22, 1, 23), + MXC91231_PIN_AP_ED_INT5 = IOMUX_PIN(0, 2, 23, 22, 2, 23), + MXC91231_PIN_AP_ED_INT6 = IOMUX_PIN(0, 2, 24, 22, 3, 23), + MXC91231_PIN_AP_ED_INT7 = IOMUX_PIN(0, 2, 25, 23, 0, 23), + MXC91231_PIN_AP_U2_DSR_B = IOMUX_PIN(0, 2, 26, 23, 1, 28), + MXC91231_PIN_AP_U2_RI_B = IOMUX_PIN(0, 2, 27, 23, 2, 28), + MXC91231_PIN_AP_U2_CTS_B = IOMUX_PIN(0, 2, 28, 23, 3, 28), + MXC91231_PIN_AP_U2_DTR_B = IOMUX_PIN(0, 2, 29, 24, 0, 28), + MXC91231_PIN_AP_KPROW0 = IOMUX_PIN(0, 7, 0, 24, 1, 10), + MXC91231_PIN_AP_KPROW1 = IOMUX_PIN(0, 1, 15, 24, 2, 10), + MXC91231_PIN_AP_KPROW2 = IOMUX_PIN(0, 7, 0, 24, 3, 10), + MXC91231_PIN_AP_KPROW3 = IOMUX_PIN(0, 7, 0, 25, 0, 10), + MXC91231_PIN_AP_KPCOL0 = IOMUX_PIN(0, 7, 0, 25, 1, 11), + MXC91231_PIN_AP_KPCOL1 = IOMUX_PIN(0, 7, 0, 25, 2, 11), + MXC91231_PIN_AP_KPCOL2 = IOMUX_PIN(0, 7, 0, 25, 3, 11), + + /* Shared pins */ + MXC91231_PIN_SP_U3_TXD = IOMUX_PIN(1, 3, 0, 0, 0, 28), + MXC91231_PIN_SP_U3_RXD = IOMUX_PIN(1, 3, 1, 0, 1, 28), + MXC91231_PIN_SP_U3_RTS_B = IOMUX_PIN(1, 3, 2, 0, 2, 28), + MXC91231_PIN_SP_U3_CTS_B = IOMUX_PIN(1, 3, 3, 0, 3, 28), + MXC91231_PIN_SP_USB_TXOE_B = IOMUX_PIN(1, 3, 4, 1, 0, 28), + MXC91231_PIN_SP_USB_DAT_VP = IOMUX_PIN(1, 3, 5, 1, 1, 28), + MXC91231_PIN_SP_USB_SE0_VM = IOMUX_PIN(1, 3, 6, 1, 2, 28), + MXC91231_PIN_SP_USB_RXD = IOMUX_PIN(1, 3, 7, 1, 3, 28), + MXC91231_PIN_SP_UH2_TXOE_B = IOMUX_PIN(1, 3, 8, 2, 0, 28), + MXC91231_PIN_SP_UH2_SPEED = IOMUX_PIN(1, 3, 9, 2, 1, 28), + MXC91231_PIN_SP_UH2_SUSPEN = IOMUX_PIN(1, 3, 10, 2, 2, 28), + MXC91231_PIN_SP_UH2_TXDP = IOMUX_PIN(1, 3, 11, 2, 3, 28), + MXC91231_PIN_SP_UH2_RXDP = IOMUX_PIN(1, 3, 12, 3, 0, 28), + MXC91231_PIN_SP_UH2_RXDM = IOMUX_PIN(1, 3, 13, 3, 1, 28), + MXC91231_PIN_SP_UH2_OVR = IOMUX_PIN(1, 3, 14, 3, 2, 28), + MXC91231_PIN_SP_UH2_PWR = IOMUX_PIN(1, 3, 15, 3, 3, 28), + MXC91231_PIN_SP_SD1_DAT0 = IOMUX_PIN(1, 3, 16, 4, 0, 25), + MXC91231_PIN_SP_SD1_DAT1 = IOMUX_PIN(1, 3, 17, 4, 1, 25), + MXC91231_PIN_SP_SD1_DAT2 = IOMUX_PIN(1, 3, 18, 4, 2, 25), + MXC91231_PIN_SP_SD1_DAT3 = IOMUX_PIN(1, 3, 19, 4, 3, 25), + MXC91231_PIN_SP_SD1_CMD = IOMUX_PIN(1, 3, 20, 5, 0, 25), + MXC91231_PIN_SP_SD1_CLK = IOMUX_PIN(1, 3, 21, 5, 1, 25), + MXC91231_PIN_SP_SD2_DAT0 = IOMUX_PIN(1, 3, 22, 5, 2, 26), + MXC91231_PIN_SP_SD2_DAT1 = IOMUX_PIN(1, 3, 23, 5, 3, 26), + MXC91231_PIN_SP_SD2_DAT2 = IOMUX_PIN(1, 3, 24, 6, 0, 26), + MXC91231_PIN_SP_SD2_DAT3 = IOMUX_PIN(1, 3, 25, 6, 1, 26), + MXC91231_PIN_SP_GPIO_SP_A26 = IOMUX_PIN(1, 3, 26, 6, 2, 28), + MXC91231_PIN_SP_SPI1_CLK = IOMUX_PIN(1, 3, 27, 6, 3, 13), + MXC91231_PIN_SP_SPI1_MOSI = IOMUX_PIN(1, 3, 28, 7, 0, 13), + MXC91231_PIN_SP_SPI1_MISO = IOMUX_PIN(1, 3, 29, 7, 1, 13), + MXC91231_PIN_SP_SPI1_SS0 = IOMUX_PIN(1, 3, 30, 7, 2, 13), + MXC91231_PIN_SP_SPI1_SS1 = IOMUX_PIN(1, 3, 31, 7, 3, 13), + MXC91231_PIN_SP_SD2_CMD = IOMUX_PIN(1, 7, 0, 8, 0, 26), + MXC91231_PIN_SP_SD2_CLK = IOMUX_PIN(1, 7, 0, 8, 1, 26), + MXC91231_PIN_SP_SIM1_RST_B = IOMUX_PIN(1, 2, 30, 8, 2, 28), + MXC91231_PIN_SP_SIM1_SVEN = IOMUX_PIN(1, 7, 0, 8, 3, 28), + MXC91231_PIN_SP_SIM1_CLK = IOMUX_PIN(1, 7, 0, 9, 0, 28), + MXC91231_PIN_SP_SIM1_TRXD = IOMUX_PIN(1, 7, 0, 9, 1, 28), + MXC91231_PIN_SP_SIM1_PD = IOMUX_PIN(1, 2, 31, 9, 2, 28), + MXC91231_PIN_SP_UH2_TXDM = IOMUX_PIN(1, 7, 0, 9, 3, 28), + MXC91231_PIN_SP_UH2_RXD = IOMUX_PIN(1, 7, 0, 10, 0, 28), +}; + +#define PIN_AP_MAX (104) +#define PIN_SP_MAX (41) + +#define PIN_MAX (PIN_AP_MAX + PIN_SP_MAX) + +/* + * Convenience values for use with mxc_iomux_mode() + * + * Format here is MXC91231_PIN_(pin name)__(function) + */ + +#define MXC91231_PIN_SP_USB_DAT_VP__USB_DAT_VP \ + IOMUX_MODE(MXC91231_PIN_SP_USB_DAT_VP, IOMUX_CONFIG_FUNC) +#define MXC91231_PIN_SP_USB_SE0_VM__USB_SE0_VM \ + IOMUX_MODE(MXC91231_PIN_SP_USB_SE0_VM, IOMUX_CONFIG_FUNC) +#define MXC91231_PIN_SP_USB_DAT_VP__RXD2 \ + IOMUX_MODE(MXC91231_PIN_SP_USB_DAT_VP, IOMUX_CONFIG_ALT1) +#define MXC91231_PIN_SP_USB_SE0_VM__TXD2 \ + IOMUX_MODE(MXC91231_PIN_SP_USB_SE0_VM, IOMUX_CONFIG_ALT1) + + +#endif /* __MACH_IOMUX_MXC91231_H__ */ -- cgit v1.2.3 From 89829d5fe31dc42825f2560c3c2c641709ed594e Mon Sep 17 00:00:00 2001 From: Valentin Longchamp Date: Mon, 10 Aug 2009 18:33:10 +0200 Subject: mx31: added one more pin definition Signed-off-by: Valentin Longchamp Signed-off-by: Sascha Hauer --- arch/arm/plat-mxc/include/mach/iomux-mx3.h | 1 + 1 file changed, 1 insertion(+) diff --git a/arch/arm/plat-mxc/include/mach/iomux-mx3.h b/arch/arm/plat-mxc/include/mach/iomux-mx3.h index a3b206ce78b..67452732794 100644 --- a/arch/arm/plat-mxc/include/mach/iomux-mx3.h +++ b/arch/arm/plat-mxc/include/mach/iomux-mx3.h @@ -682,6 +682,7 @@ enum iomux_pins { #define MX31_PIN_GPIO3_0__GPIO3_0 IOMUX_MODE(MX31_PIN_GPIO3_0, IOMUX_CONFIG_GPIO) #define MX31_PIN_GPIO3_1__GPIO3_1 IOMUX_MODE(MX31_PIN_GPIO3_1, IOMUX_CONFIG_GPIO) #define MX31_PIN_TXD2__GPIO1_28 IOMUX_MODE(MX31_PIN_TXD2, IOMUX_CONFIG_GPIO) +#define MX31_PIN_GPIO1_0__GPIO1_0 IOMUX_MODE(MX31_PIN_GPIO1_0, IOMUX_CONFIG_GPIO) /*XXX: The SS0, SS1, SS2, SS3 lines of spi3 are multiplexed by cspi2_ss0, cspi2_ss1, cspi1_ss0 * cspi1_ss1*/ -- cgit v1.2.3 From b23f1534bb0e0dc97e46fc52bf9bde0c2226763c Mon Sep 17 00:00:00 2001 From: Valentin Longchamp Date: Mon, 10 Aug 2009 18:33:11 +0200 Subject: mx31moboard: added usb xcvr reset for mx31moboard Signed-off-by: Valentin Longchamp Signed-off-by: Sascha Hauer --- arch/arm/mach-mx3/mx31moboard-devboard.c | 30 ++++++++++++++++-------------- arch/arm/mach-mx3/mx31moboard-marxbot.c | 28 +++++++++++++++------------- arch/arm/mach-mx3/mx31moboard.c | 18 ++++++++++++++++++ 3 files changed, 49 insertions(+), 27 deletions(-) diff --git a/arch/arm/mach-mx3/mx31moboard-devboard.c b/arch/arm/mach-mx3/mx31moboard-devboard.c index 4704405165a..2f2f142f075 100644 --- a/arch/arm/mach-mx3/mx31moboard-devboard.c +++ b/arch/arm/mach-mx3/mx31moboard-devboard.c @@ -116,23 +116,25 @@ static struct fsl_usb2_platform_data usb_pdata = { .phy_mode = FSL_USB2_PHY_ULPI, }; -#define OTG_PAD_CFG (PAD_CTL_DRV_MAX | PAD_CTL_SRE_FAST) -#define OTG_EN_B IOMUX_TO_GPIO(MX31_PIN_USB_OC) +#define USB_PAD_CFG (PAD_CTL_DRV_MAX | PAD_CTL_SRE_FAST | PAD_CTL_HYS_CMOS | \ + PAD_CTL_ODE_CMOS | PAD_CTL_100K_PU) + +#define OTG_EN_B IOMUX_TO_GPIO(MX31_PIN_USB_OC) static void devboard_usbotg_init(void) { - mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA0, OTG_PAD_CFG); - mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA1, OTG_PAD_CFG); - mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA2, OTG_PAD_CFG); - mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA3, OTG_PAD_CFG); - mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA4, OTG_PAD_CFG); - mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA5, OTG_PAD_CFG); - mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA6, OTG_PAD_CFG); - mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA7, OTG_PAD_CFG); - mxc_iomux_set_pad(MX31_PIN_USBOTG_CLK, OTG_PAD_CFG); - mxc_iomux_set_pad(MX31_PIN_USBOTG_DIR, OTG_PAD_CFG); - mxc_iomux_set_pad(MX31_PIN_USBOTG_NXT, OTG_PAD_CFG); - mxc_iomux_set_pad(MX31_PIN_USBOTG_STP, OTG_PAD_CFG); + mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA0, USB_PAD_CFG); + mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA1, USB_PAD_CFG); + mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA2, USB_PAD_CFG); + mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA3, USB_PAD_CFG); + mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA4, USB_PAD_CFG); + mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA5, USB_PAD_CFG); + mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA6, USB_PAD_CFG); + mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA7, USB_PAD_CFG); + mxc_iomux_set_pad(MX31_PIN_USBOTG_CLK, USB_PAD_CFG); + mxc_iomux_set_pad(MX31_PIN_USBOTG_DIR, USB_PAD_CFG); + mxc_iomux_set_pad(MX31_PIN_USBOTG_NXT, USB_PAD_CFG); + mxc_iomux_set_pad(MX31_PIN_USBOTG_STP, USB_PAD_CFG); gpio_request(OTG_EN_B, "usb-udc-en"); gpio_direction_output(OTG_EN_B, 0); diff --git a/arch/arm/mach-mx3/mx31moboard-marxbot.c b/arch/arm/mach-mx3/mx31moboard-marxbot.c index 641c3d6153a..b817a4a5bcb 100644 --- a/arch/arm/mach-mx3/mx31moboard-marxbot.c +++ b/arch/arm/mach-mx3/mx31moboard-marxbot.c @@ -120,23 +120,25 @@ static struct fsl_usb2_platform_data usb_pdata = { .phy_mode = FSL_USB2_PHY_ULPI, }; -#define OTG_PAD_CFG (PAD_CTL_DRV_MAX | PAD_CTL_SRE_FAST) +#define USB_PAD_CFG (PAD_CTL_DRV_MAX | PAD_CTL_SRE_FAST | PAD_CTL_HYS_CMOS | \ + PAD_CTL_ODE_CMOS | PAD_CTL_100K_PU) + #define OTG_EN_B IOMUX_TO_GPIO(MX31_PIN_USB_OC) static void marxbot_usbotg_init(void) { - mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA0, OTG_PAD_CFG); - mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA1, OTG_PAD_CFG); - mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA2, OTG_PAD_CFG); - mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA3, OTG_PAD_CFG); - mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA4, OTG_PAD_CFG); - mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA5, OTG_PAD_CFG); - mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA6, OTG_PAD_CFG); - mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA7, OTG_PAD_CFG); - mxc_iomux_set_pad(MX31_PIN_USBOTG_CLK, OTG_PAD_CFG); - mxc_iomux_set_pad(MX31_PIN_USBOTG_DIR, OTG_PAD_CFG); - mxc_iomux_set_pad(MX31_PIN_USBOTG_NXT, OTG_PAD_CFG); - mxc_iomux_set_pad(MX31_PIN_USBOTG_STP, OTG_PAD_CFG); + mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA0, USB_PAD_CFG); + mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA1, USB_PAD_CFG); + mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA2, USB_PAD_CFG); + mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA3, USB_PAD_CFG); + mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA4, USB_PAD_CFG); + mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA5, USB_PAD_CFG); + mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA6, USB_PAD_CFG); + mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA7, USB_PAD_CFG); + mxc_iomux_set_pad(MX31_PIN_USBOTG_CLK, USB_PAD_CFG); + mxc_iomux_set_pad(MX31_PIN_USBOTG_DIR, USB_PAD_CFG); + mxc_iomux_set_pad(MX31_PIN_USBOTG_NXT, USB_PAD_CFG); + mxc_iomux_set_pad(MX31_PIN_USBOTG_STP, USB_PAD_CFG); gpio_request(OTG_EN_B, "usb-udc-en"); gpio_direction_output(OTG_EN_B, 0); diff --git a/arch/arm/mach-mx3/mx31moboard.c b/arch/arm/mach-mx3/mx31moboard.c index b86b8a757c9..53ce60bdc82 100644 --- a/arch/arm/mach-mx3/mx31moboard.c +++ b/arch/arm/mach-mx3/mx31moboard.c @@ -16,6 +16,7 @@ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA */ +#include #include #include #include @@ -56,6 +57,8 @@ static unsigned int moboard_pins[] = { MX31_PIN_SD1_DATA1__SD1_DATA1, MX31_PIN_SD1_DATA0__SD1_DATA0, MX31_PIN_SD1_CLK__SD1_CLK, MX31_PIN_SD1_CMD__SD1_CMD, MX31_PIN_ATA_CS0__GPIO3_26, MX31_PIN_ATA_CS1__GPIO3_27, + /* USB reset */ + MX31_PIN_GPIO1_0__GPIO1_0, }; static struct physmap_flash_data mx31moboard_flash_data = { @@ -143,6 +146,19 @@ static struct imxmmc_platform_data sdhc1_pdata = { .exit = moboard_sdhc1_exit, }; +/* + * this pin is dedicated for all mx31moboard systems, so we do it here + */ +#define USB_RESET_B IOMUX_TO_GPIO(MX31_PIN_GPIO1_0) + +static void usb_xcvr_reset(void) +{ + gpio_request(USB_RESET_B, "usb-reset"); + gpio_direction_output(USB_RESET_B, 0); + mdelay(1); + gpio_set_value(USB_RESET_B, 1); +} + static struct platform_device *devices[] __initdata = { &mx31moboard_flash, }; @@ -168,6 +184,8 @@ static void __init mxc_board_init(void) mxc_register_device(&mxcsdhc_device0, &sdhc1_pdata); + usb_xcvr_reset(); + switch (mx31moboard_baseboard) { case MX31NOBOARD: break; -- cgit v1.2.3 From 88b05647171460b1d479371690876f8ac5957d42 Mon Sep 17 00:00:00 2001 From: Valentin Longchamp Date: Mon, 10 Aug 2009 18:33:12 +0200 Subject: mx31moboard: move usb otg support back to moboard common file since all boards finally have this device Signed-off-by: Valentin Longchamp Signed-off-by: Sascha Hauer --- arch/arm/mach-mx3/mx31moboard-devboard.c | 45 -------------------------------- arch/arm/mach-mx3/mx31moboard-marxbot.c | 45 -------------------------------- arch/arm/mach-mx3/mx31moboard.c | 45 ++++++++++++++++++++++++++++++++ 3 files changed, 45 insertions(+), 90 deletions(-) diff --git a/arch/arm/mach-mx3/mx31moboard-devboard.c b/arch/arm/mach-mx3/mx31moboard-devboard.c index 2f2f142f075..b3e8f251ac7 100644 --- a/arch/arm/mach-mx3/mx31moboard-devboard.c +++ b/arch/arm/mach-mx3/mx31moboard-devboard.c @@ -16,7 +16,6 @@ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA */ -#include #include #include #include @@ -40,18 +39,6 @@ static unsigned int devboard_pins[] = { MX31_PIN_PC_READY__SD2_DATA1, MX31_PIN_PC_WAIT_B__SD2_DATA0, MX31_PIN_PC_CD2_B__SD2_CLK, MX31_PIN_PC_CD1_B__SD2_CMD, MX31_PIN_ATA_DIOR__GPIO3_28, MX31_PIN_ATA_DIOW__GPIO3_29, - /* USB OTG */ - MX31_PIN_USBOTG_DATA0__USBOTG_DATA0, - MX31_PIN_USBOTG_DATA1__USBOTG_DATA1, - MX31_PIN_USBOTG_DATA2__USBOTG_DATA2, - MX31_PIN_USBOTG_DATA3__USBOTG_DATA3, - MX31_PIN_USBOTG_DATA4__USBOTG_DATA4, - MX31_PIN_USBOTG_DATA5__USBOTG_DATA5, - MX31_PIN_USBOTG_DATA6__USBOTG_DATA6, - MX31_PIN_USBOTG_DATA7__USBOTG_DATA7, - MX31_PIN_USBOTG_CLK__USBOTG_CLK, MX31_PIN_USBOTG_DIR__USBOTG_DIR, - MX31_PIN_USBOTG_NXT__USBOTG_NXT, MX31_PIN_USBOTG_STP__USBOTG_STP, - MX31_PIN_USB_OC__GPIO1_30, }; static struct imxuart_platform_data uart_pdata = { @@ -111,35 +98,6 @@ static struct imxmmc_platform_data sdhc2_pdata = { .exit = devboard_sdhc2_exit, }; -static struct fsl_usb2_platform_data usb_pdata = { - .operating_mode = FSL_USB2_DR_DEVICE, - .phy_mode = FSL_USB2_PHY_ULPI, -}; - -#define USB_PAD_CFG (PAD_CTL_DRV_MAX | PAD_CTL_SRE_FAST | PAD_CTL_HYS_CMOS | \ - PAD_CTL_ODE_CMOS | PAD_CTL_100K_PU) - -#define OTG_EN_B IOMUX_TO_GPIO(MX31_PIN_USB_OC) - -static void devboard_usbotg_init(void) -{ - mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA0, USB_PAD_CFG); - mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA1, USB_PAD_CFG); - mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA2, USB_PAD_CFG); - mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA3, USB_PAD_CFG); - mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA4, USB_PAD_CFG); - mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA5, USB_PAD_CFG); - mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA6, USB_PAD_CFG); - mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA7, USB_PAD_CFG); - mxc_iomux_set_pad(MX31_PIN_USBOTG_CLK, USB_PAD_CFG); - mxc_iomux_set_pad(MX31_PIN_USBOTG_DIR, USB_PAD_CFG); - mxc_iomux_set_pad(MX31_PIN_USBOTG_NXT, USB_PAD_CFG); - mxc_iomux_set_pad(MX31_PIN_USBOTG_STP, USB_PAD_CFG); - - gpio_request(OTG_EN_B, "usb-udc-en"); - gpio_direction_output(OTG_EN_B, 0); -} - /* * system init for baseboard usage. Will be called by mx31moboard init. */ @@ -153,7 +111,4 @@ void __init mx31moboard_devboard_init(void) mxc_register_device(&mxc_uart_device1, &uart_pdata); mxc_register_device(&mxcsdhc_device1, &sdhc2_pdata); - - devboard_usbotg_init(); - mxc_register_device(&mxc_otg_udc_device, &usb_pdata); } diff --git a/arch/arm/mach-mx3/mx31moboard-marxbot.c b/arch/arm/mach-mx3/mx31moboard-marxbot.c index b817a4a5bcb..53ce7ff0637 100644 --- a/arch/arm/mach-mx3/mx31moboard-marxbot.c +++ b/arch/arm/mach-mx3/mx31moboard-marxbot.c @@ -16,7 +16,6 @@ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA */ -#include #include #include #include @@ -48,18 +47,6 @@ static unsigned int marxbot_pins[] = { MX31_PIN_CSI_PIXCLK__CSI_PIXCLK, MX31_PIN_CSI_VSYNC__CSI_VSYNC, MX31_PIN_GPIO3_0__GPIO3_0, MX31_PIN_GPIO3_1__GPIO3_1, MX31_PIN_TXD2__GPIO1_28, - /* USB OTG */ - MX31_PIN_USBOTG_DATA0__USBOTG_DATA0, - MX31_PIN_USBOTG_DATA1__USBOTG_DATA1, - MX31_PIN_USBOTG_DATA2__USBOTG_DATA2, - MX31_PIN_USBOTG_DATA3__USBOTG_DATA3, - MX31_PIN_USBOTG_DATA4__USBOTG_DATA4, - MX31_PIN_USBOTG_DATA5__USBOTG_DATA5, - MX31_PIN_USBOTG_DATA6__USBOTG_DATA6, - MX31_PIN_USBOTG_DATA7__USBOTG_DATA7, - MX31_PIN_USBOTG_CLK__USBOTG_CLK, MX31_PIN_USBOTG_DIR__USBOTG_DIR, - MX31_PIN_USBOTG_NXT__USBOTG_NXT, MX31_PIN_USBOTG_STP__USBOTG_STP, - MX31_PIN_USB_OC__GPIO1_30, }; #define SDHC2_CD IOMUX_TO_GPIO(MX31_PIN_ATA_DIOR) @@ -115,35 +102,6 @@ static struct imxmmc_platform_data sdhc2_pdata = { .exit = marxbot_sdhc2_exit, }; -static struct fsl_usb2_platform_data usb_pdata = { - .operating_mode = FSL_USB2_DR_DEVICE, - .phy_mode = FSL_USB2_PHY_ULPI, -}; - -#define USB_PAD_CFG (PAD_CTL_DRV_MAX | PAD_CTL_SRE_FAST | PAD_CTL_HYS_CMOS | \ - PAD_CTL_ODE_CMOS | PAD_CTL_100K_PU) - -#define OTG_EN_B IOMUX_TO_GPIO(MX31_PIN_USB_OC) - -static void marxbot_usbotg_init(void) -{ - mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA0, USB_PAD_CFG); - mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA1, USB_PAD_CFG); - mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA2, USB_PAD_CFG); - mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA3, USB_PAD_CFG); - mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA4, USB_PAD_CFG); - mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA5, USB_PAD_CFG); - mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA6, USB_PAD_CFG); - mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA7, USB_PAD_CFG); - mxc_iomux_set_pad(MX31_PIN_USBOTG_CLK, USB_PAD_CFG); - mxc_iomux_set_pad(MX31_PIN_USBOTG_DIR, USB_PAD_CFG); - mxc_iomux_set_pad(MX31_PIN_USBOTG_NXT, USB_PAD_CFG); - mxc_iomux_set_pad(MX31_PIN_USBOTG_STP, USB_PAD_CFG); - - gpio_request(OTG_EN_B, "usb-udc-en"); - gpio_direction_output(OTG_EN_B, 0); -} - /* * system init for baseboard usage. Will be called by mx31moboard init. */ @@ -155,7 +113,4 @@ void __init mx31moboard_marxbot_init(void) "marxbot"); mxc_register_device(&mxcsdhc_device1, &sdhc2_pdata); - - marxbot_usbotg_init(); - mxc_register_device(&mxc_otg_udc_device, &usb_pdata); } diff --git a/arch/arm/mach-mx3/mx31moboard.c b/arch/arm/mach-mx3/mx31moboard.c index 53ce60bdc82..2852bd58eda 100644 --- a/arch/arm/mach-mx3/mx31moboard.c +++ b/arch/arm/mach-mx3/mx31moboard.c @@ -17,6 +17,7 @@ */ #include +#include #include #include #include @@ -59,6 +60,18 @@ static unsigned int moboard_pins[] = { MX31_PIN_ATA_CS0__GPIO3_26, MX31_PIN_ATA_CS1__GPIO3_27, /* USB reset */ MX31_PIN_GPIO1_0__GPIO1_0, + /* USB OTG */ + MX31_PIN_USBOTG_DATA0__USBOTG_DATA0, + MX31_PIN_USBOTG_DATA1__USBOTG_DATA1, + MX31_PIN_USBOTG_DATA2__USBOTG_DATA2, + MX31_PIN_USBOTG_DATA3__USBOTG_DATA3, + MX31_PIN_USBOTG_DATA4__USBOTG_DATA4, + MX31_PIN_USBOTG_DATA5__USBOTG_DATA5, + MX31_PIN_USBOTG_DATA6__USBOTG_DATA6, + MX31_PIN_USBOTG_DATA7__USBOTG_DATA7, + MX31_PIN_USBOTG_CLK__USBOTG_CLK, MX31_PIN_USBOTG_DIR__USBOTG_DIR, + MX31_PIN_USBOTG_NXT__USBOTG_NXT, MX31_PIN_USBOTG_STP__USBOTG_STP, + MX31_PIN_USB_OC__GPIO1_30, }; static struct physmap_flash_data mx31moboard_flash_data = { @@ -159,6 +172,35 @@ static void usb_xcvr_reset(void) gpio_set_value(USB_RESET_B, 1); } +#define USB_PAD_CFG (PAD_CTL_DRV_MAX | PAD_CTL_SRE_FAST | PAD_CTL_HYS_CMOS | \ + PAD_CTL_ODE_CMOS | PAD_CTL_100K_PU) + +#define OTG_EN_B IOMUX_TO_GPIO(MX31_PIN_USB_OC) + +static void moboard_usbotg_init(void) +{ + mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA0, USB_PAD_CFG); + mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA1, USB_PAD_CFG); + mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA2, USB_PAD_CFG); + mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA3, USB_PAD_CFG); + mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA4, USB_PAD_CFG); + mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA5, USB_PAD_CFG); + mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA6, USB_PAD_CFG); + mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA7, USB_PAD_CFG); + mxc_iomux_set_pad(MX31_PIN_USBOTG_CLK, USB_PAD_CFG); + mxc_iomux_set_pad(MX31_PIN_USBOTG_DIR, USB_PAD_CFG); + mxc_iomux_set_pad(MX31_PIN_USBOTG_NXT, USB_PAD_CFG); + mxc_iomux_set_pad(MX31_PIN_USBOTG_STP, USB_PAD_CFG); + + gpio_request(OTG_EN_B, "usb-udc-en"); + gpio_direction_output(OTG_EN_B, 0); +} + +static struct fsl_usb2_platform_data usb_pdata = { + .operating_mode = FSL_USB2_DR_DEVICE, + .phy_mode = FSL_USB2_PHY_ULPI, +}; + static struct platform_device *devices[] __initdata = { &mx31moboard_flash, }; @@ -186,6 +228,9 @@ static void __init mxc_board_init(void) usb_xcvr_reset(); + moboard_usbotg_init(); + mxc_register_device(&mxc_otg_udc_device, &usb_pdata); + switch (mx31moboard_baseboard) { case MX31NOBOARD: break; -- cgit v1.2.3 From f420db843b7756e5d0d052b00472c94154f50c93 Mon Sep 17 00:00:00 2001 From: Sascha Hauer Date: Fri, 19 Dec 2008 14:32:14 +0100 Subject: MX2: Add SPI devices/resources Signed-off-by: Sascha Hauer --- arch/arm/mach-mx2/devices.c | 68 +++++++++++++++++++++++++++++++++++++++++++++ arch/arm/mach-mx2/devices.h | 4 +++ 2 files changed, 72 insertions(+) diff --git a/arch/arm/mach-mx2/devices.c b/arch/arm/mach-mx2/devices.c index 4ecf0977beb..62810cbe4e3 100644 --- a/arch/arm/mach-mx2/devices.c +++ b/arch/arm/mach-mx2/devices.c @@ -39,6 +39,74 @@ #include "devices.h" +/* + * SPI master controller + * + * - i.MX1: 2 channel (slighly different register setting) + * - i.MX21: 2 channel + * - i.MX27: 3 channel + */ +static struct resource mxc_spi_resources0[] = { + { + .start = CSPI1_BASE_ADDR, + .end = CSPI1_BASE_ADDR + SZ_4K - 1, + .flags = IORESOURCE_MEM, + }, { + .start = MXC_INT_CSPI1, + .end = MXC_INT_CSPI1, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct resource mxc_spi_resources1[] = { + { + .start = CSPI2_BASE_ADDR, + .end = CSPI2_BASE_ADDR + SZ_4K - 1, + .flags = IORESOURCE_MEM, + }, { + .start = MXC_INT_CSPI2, + .end = MXC_INT_CSPI2, + .flags = IORESOURCE_IRQ, + }, +}; + +#ifdef CONFIG_MACH_MX27 +static struct resource mxc_spi_resources2[] = { + { + .start = CSPI3_BASE_ADDR, + .end = CSPI3_BASE_ADDR + SZ_4K - 1, + .flags = IORESOURCE_MEM, + }, { + .start = MXC_INT_CSPI3, + .end = MXC_INT_CSPI3, + .flags = IORESOURCE_IRQ, + }, +}; +#endif + +struct platform_device mxc_spi_device0 = { + .name = "spi_imx", + .id = 0, + .num_resources = ARRAY_SIZE(mxc_spi_resources0), + .resource = mxc_spi_resources0, +}; + +struct platform_device mxc_spi_device1 = { + .name = "spi_imx", + .id = 1, + .num_resources = ARRAY_SIZE(mxc_spi_resources1), + .resource = mxc_spi_resources1, +}; + +#ifdef CONFIG_MACH_MX27 +struct platform_device mxc_spi_device2 = { + .name = "spi_imx", + .id = 2, + .num_resources = ARRAY_SIZE(mxc_spi_resources2), + .resource = mxc_spi_resources2, +}; +#endif + /* * General Purpose Timer * - i.MX21: 3 timers diff --git a/arch/arm/mach-mx2/devices.h b/arch/arm/mach-mx2/devices.h index 6e91b4e3509..d315406d672 100644 --- a/arch/arm/mach-mx2/devices.h +++ b/arch/arm/mach-mx2/devices.h @@ -23,3 +23,7 @@ extern struct platform_device mxc_otg_udc_device; extern struct platform_device mxc_otg_host; extern struct platform_device mxc_usbh1; extern struct platform_device mxc_usbh2; +extern struct platform_device mxc_spi_device0; +extern struct platform_device mxc_spi_device1; +extern struct platform_device mxc_spi_device2; + -- cgit v1.2.3 From d37ba97d49703be4e71f786cffcee4dfe73fa93c Mon Sep 17 00:00:00 2001 From: Sascha Hauer Date: Fri, 19 Dec 2008 14:32:15 +0100 Subject: MX31: add spi controller devices/resources Signed-off-by: Sascha Hauer --- arch/arm/mach-mx3/devices.c | 61 +++++++++++++++++++++++++++++++++++++++++++++ arch/arm/mach-mx3/devices.h | 3 +++ 2 files changed, 64 insertions(+) diff --git a/arch/arm/mach-mx3/devices.c b/arch/arm/mach-mx3/devices.c index 4e728a29196..cde1b079242 100644 --- a/arch/arm/mach-mx3/devices.c +++ b/arch/arm/mach-mx3/devices.c @@ -455,6 +455,67 @@ struct platform_device mxc_usbh2 = { .num_resources = ARRAY_SIZE(mxc_usbh2_resources), }; +/* + * SPI master controller + * 3 channels + */ +static struct resource imx_spi_0_resources[] = { + { + .start = CSPI1_BASE_ADDR, + .end = CSPI1_BASE_ADDR + SZ_4K - 1, + .flags = IORESOURCE_MEM, + }, { + .start = MXC_INT_CSPI1, + .end = MXC_INT_CSPI1, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct resource imx_spi_1_resources[] = { + { + .start = CSPI2_BASE_ADDR, + .end = CSPI2_BASE_ADDR + SZ_4K - 1, + .flags = IORESOURCE_MEM, + }, { + .start = MXC_INT_CSPI2, + .end = MXC_INT_CSPI2, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct resource imx_spi_2_resources[] = { + { + .start = CSPI3_BASE_ADDR, + .end = CSPI3_BASE_ADDR + SZ_4K - 1, + .flags = IORESOURCE_MEM, + }, { + .start = MXC_INT_CSPI3, + .end = MXC_INT_CSPI3, + .flags = IORESOURCE_IRQ, + }, +}; + +struct platform_device imx_spi_device0 = { + .name = "spi_imx", + .id = 0, + .num_resources = ARRAY_SIZE(imx_spi_0_resources), + .resource = imx_spi_0_resources, +}; + +struct platform_device imx_spi_device1 = { + .name = "spi_imx", + .id = 1, + .num_resources = ARRAY_SIZE(imx_spi_1_resources), + .resource = imx_spi_1_resources, +}; + +struct platform_device imx_spi_device2 = { + .name = "spi_imx", + .id = 2, + .num_resources = ARRAY_SIZE(imx_spi_2_resources), + .resource = imx_spi_2_resources, +}; + #ifdef CONFIG_ARCH_MX35 static struct resource mxc_fec_resources[] = { { diff --git a/arch/arm/mach-mx3/devices.h b/arch/arm/mach-mx3/devices.h index 81614319755..79f2be45d13 100644 --- a/arch/arm/mach-mx3/devices.h +++ b/arch/arm/mach-mx3/devices.h @@ -20,4 +20,7 @@ extern struct platform_device mxc_otg_host; extern struct platform_device mxc_usbh1; extern struct platform_device mxc_usbh2; extern struct platform_device mxc_rnga_device; +extern struct platform_device imx_spi_device0; +extern struct platform_device imx_spi_device1; +extern struct platform_device imx_spi_device2; -- cgit v1.2.3 From 547270a3b9f2deb9590b65e8fc351e5399ddf15d Mon Sep 17 00:00:00 2001 From: Sascha Hauer Date: Tue, 17 Mar 2009 15:43:54 +0100 Subject: i.MX35 clock support: Add USB clocks Signed-off-by: Sascha Hauer --- arch/arm/mach-mx3/clock-imx35.c | 20 ++++++++++++++++++-- 1 file changed, 18 insertions(+), 2 deletions(-) diff --git a/arch/arm/mach-mx3/clock-imx35.c b/arch/arm/mach-mx3/clock-imx35.c index 1dbcdc07257..fe5c4217322 100644 --- a/arch/arm/mach-mx3/clock-imx35.c +++ b/arch/arm/mach-mx3/clock-imx35.c @@ -273,6 +273,19 @@ static unsigned long get_rate_csi(struct clk *clk) return rate / get_3_3_div((pdr2 >> 16) & 0x3f); } +static unsigned long get_rate_otg(struct clk *clk) +{ + unsigned long pdr4 = __raw_readl(CCM_BASE + CCM_PDR4); + unsigned long rate; + + if (pdr4 & (1 << 9)) + rate = get_rate_arm(); + else + rate = get_rate_ppll(); + + return rate / get_3_3_div((pdr4 >> 22) & 0x3f); +} + static unsigned long get_rate_ipg_per(struct clk *clk) { unsigned long pdr0 = __raw_readl(CCM_BASE + CCM_PDR0); @@ -365,7 +378,7 @@ DEFINE_CLOCK(ssi2_clk, 1, CCM_CGR2, 14, get_rate_ssi, NULL); DEFINE_CLOCK(uart1_clk, 0, CCM_CGR2, 16, get_rate_uart, NULL); DEFINE_CLOCK(uart2_clk, 1, CCM_CGR2, 18, get_rate_uart, NULL); DEFINE_CLOCK(uart3_clk, 2, CCM_CGR2, 20, get_rate_uart, NULL); -DEFINE_CLOCK(usbotg_clk, 0, CCM_CGR2, 22, NULL, NULL); +DEFINE_CLOCK(usbotg_clk, 0, CCM_CGR2, 22, get_rate_otg, NULL); DEFINE_CLOCK(wdog_clk, 0, CCM_CGR2, 24, NULL, NULL); DEFINE_CLOCK(max_clk, 0, CCM_CGR2, 26, NULL, NULL); DEFINE_CLOCK(admux_clk, 0, CCM_CGR2, 30, NULL, NULL); @@ -426,7 +439,10 @@ static struct clk_lookup lookups[] = { _REGISTER_CLOCK("imx-uart.0", NULL, uart1_clk) _REGISTER_CLOCK("imx-uart.1", NULL, uart2_clk) _REGISTER_CLOCK("imx-uart.2", NULL, uart3_clk) - _REGISTER_CLOCK(NULL, "usbotg", usbotg_clk) + _REGISTER_CLOCK("mxc-ehci.0", "usb", usbotg_clk) + _REGISTER_CLOCK("mxc-ehci.1", "usb", usbotg_clk) + _REGISTER_CLOCK("mxc-ehci.2", "usb", usbotg_clk) + _REGISTER_CLOCK("fsl-usb2-udc", "usb", usbotg_clk) _REGISTER_CLOCK("mxc_wdt.0", NULL, wdog_clk) _REGISTER_CLOCK(NULL, "max", max_clk) _REGISTER_CLOCK(NULL, "admux", admux_clk) -- cgit v1.2.3 From 337316986f0531e1681c409de9b73af0bc6dc7bb Mon Sep 17 00:00:00 2001 From: Luotao Fu Date: Thu, 6 Aug 2009 11:19:39 +0200 Subject: mx27: add support for phytec pca100 (phyCARD-s) board Signed-off-by: Luotao Fu Signed-off-by: Sascha Hauer --- arch/arm/mach-mx2/Kconfig | 7 ++ arch/arm/mach-mx2/Makefile | 2 + arch/arm/mach-mx2/pca100.c | 244 +++++++++++++++++++++++++++++++++++++++++++++ 3 files changed, 253 insertions(+) create mode 100644 arch/arm/mach-mx2/pca100.c diff --git a/arch/arm/mach-mx2/Kconfig b/arch/arm/mach-mx2/Kconfig index 0c28a37bc14..c8a2eac4d13 100644 --- a/arch/arm/mach-mx2/Kconfig +++ b/arch/arm/mach-mx2/Kconfig @@ -95,4 +95,11 @@ config MACH_MX27LITE Include support for MX27 LITEKIT platform. This includes specific configurations for the board and its peripherals. +config MACH_PCA100 + bool "Phytec phyCARD-s (pca100)" + depends on MACH_MX27 + help + Include support for phyCARD-s (aka pca100) platform. This + includes specific configurations for the module and its peripherals. + endif diff --git a/arch/arm/mach-mx2/Makefile b/arch/arm/mach-mx2/Makefile index 8b6846c4226..19560f04563 100644 --- a/arch/arm/mach-mx2/Makefile +++ b/arch/arm/mach-mx2/Makefile @@ -19,3 +19,5 @@ obj-$(CONFIG_MACH_MX27_3DS) += mx27pdk.o obj-$(CONFIG_MACH_MX27LITE) += mx27lite.o obj-$(CONFIG_MACH_EUKREA_CPUIMX27) += eukrea_cpuimx27.o obj-$(CONFIG_MACH_EUKREA_MBIMX27_BASEBOARD) += eukrea_mbimx27-baseboard.o +obj-$(CONFIG_MACH_PCA100) += pca100.o + diff --git a/arch/arm/mach-mx2/pca100.c b/arch/arm/mach-mx2/pca100.c new file mode 100644 index 00000000000..fe5b165b88c --- /dev/null +++ b/arch/arm/mach-mx2/pca100.c @@ -0,0 +1,244 @@ +/* + * Copyright 2007 Robert Schwebel , Pengutronix + * Copyright (C) 2009 Sascha Hauer (kernel@pengutronix.de) + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version 2 + * of the License, or (at your option) any later version. + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, + * MA 02110-1301, USA. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include +#include +#include +#include +#include +#if defined(CONFIG_SPI_IMX) || defined(CONFIG_SPI_IMX_MODULE) +#include +#endif +#include +#include +#include +#include + +#include "devices.h" + +static int pca100_pins[] = { + /* UART1 */ + PE12_PF_UART1_TXD, + PE13_PF_UART1_RXD, + PE14_PF_UART1_CTS, + PE15_PF_UART1_RTS, + /* SDHC */ + PB4_PF_SD2_D0, + PB5_PF_SD2_D1, + PB6_PF_SD2_D2, + PB7_PF_SD2_D3, + PB8_PF_SD2_CMD, + PB9_PF_SD2_CLK, + /* FEC */ + PD0_AIN_FEC_TXD0, + PD1_AIN_FEC_TXD1, + PD2_AIN_FEC_TXD2, + PD3_AIN_FEC_TXD3, + PD4_AOUT_FEC_RX_ER, + PD5_AOUT_FEC_RXD1, + PD6_AOUT_FEC_RXD2, + PD7_AOUT_FEC_RXD3, + PD8_AF_FEC_MDIO, + PD9_AIN_FEC_MDC, + PD10_AOUT_FEC_CRS, + PD11_AOUT_FEC_TX_CLK, + PD12_AOUT_FEC_RXD0, + PD13_AOUT_FEC_RX_DV, + PD14_AOUT_FEC_RX_CLK, + PD15_AOUT_FEC_COL, + PD16_AIN_FEC_TX_ER, + PF23_AIN_FEC_TX_EN, + /* SSI1 */ + PC20_PF_SSI1_FS, + PC21_PF_SSI1_RXD, + PC22_PF_SSI1_TXD, + PC23_PF_SSI1_CLK, + /* onboard I2C */ + PC5_PF_I2C2_SDA, + PC6_PF_I2C2_SCL, + /* external I2C */ + PD17_PF_I2C_DATA, + PD18_PF_I2C_CLK, + /* SPI1 */ + PD25_PF_CSPI1_RDY, + PD29_PF_CSPI1_SCLK, + PD30_PF_CSPI1_MISO, + PD31_PF_CSPI1_MOSI, +}; + +static struct imxuart_platform_data uart_pdata = { + .flags = IMXUART_HAVE_RTSCTS, +}; + +static struct mxc_nand_platform_data pca100_nand_board_info = { + .width = 1, + .hw_ecc = 1, +}; + +static struct platform_device *platform_devices[] __initdata = { + &mxc_w1_master_device, + &mxc_fec_device, +}; + +static struct imxi2c_platform_data pca100_i2c_1_data = { + .bitrate = 100000, +}; + +static struct at24_platform_data board_eeprom = { + .byte_len = 4096, + .page_size = 32, + .flags = AT24_FLAG_ADDR16, +}; + +static struct i2c_board_info pca100_i2c_devices[] = { + { + I2C_BOARD_INFO("at24", 0x52), /* E0=0, E1=1, E2=0 */ + .platform_data = &board_eeprom, + }, { + I2C_BOARD_INFO("rtc-pcf8563", 0x51), + .type = "pcf8563" + }, { + I2C_BOARD_INFO("lm75", 0x4a), + .type = "lm75" + } +}; + +#if defined(CONFIG_SPI_IMX) || defined(CONFIG_SPI_IMX_MODULE) +static struct spi_eeprom at25320 = { + .name = "at25320an", + .byte_len = 4096, + .page_size = 32, + .flags = EE_ADDR2, +}; + +static struct spi_board_info pca100_spi_board_info[] __initdata = { + { + .modalias = "at25", + .max_speed_hz = 30000, + .bus_num = 0, + .chip_select = 1, + .platform_data = &at25320, + }, +}; + +static int pca100_spi_cs[] = {GPIO_PORTD + 28, GPIO_PORTD + 27}; + +static struct spi_imx_master pca100_spi_0_data = { + .chipselect = pca100_spi_cs, + .num_chipselect = ARRAY_SIZE(pca100_spi_cs), +}; +#endif + +static int pca100_sdhc2_init(struct device *dev, irq_handler_t detect_irq, + void *data) +{ + int ret; + + ret = request_irq(IRQ_GPIOC(29), detect_irq, + IRQF_DISABLED | IRQF_TRIGGER_FALLING, + "imx-mmc-detect", data); + if (ret) + printk(KERN_ERR + "pca100: Failed to reuest irq for sd/mmc detection\n"); + + return ret; +} + +static void pca100_sdhc2_exit(struct device *dev, void *data) +{ + free_irq(IRQ_GPIOC(29), data); +} + +static struct imxmmc_platform_data sdhc_pdata = { + .init = pca100_sdhc2_init, + .exit = pca100_sdhc2_exit, +}; + +static void __init pca100_init(void) +{ + int ret; + + ret = mxc_gpio_setup_multiple_pins(pca100_pins, + ARRAY_SIZE(pca100_pins), "PCA100"); + if (ret) + printk(KERN_ERR "pca100: Failed to setup pins (%d)\n", ret); + + mxc_register_device(&mxc_uart_device0, &uart_pdata); + + mxc_gpio_mode(GPIO_PORTC | 29 | GPIO_GPIO | GPIO_IN); + mxc_register_device(&mxc_sdhc_device1, &sdhc_pdata); + + mxc_register_device(&mxc_nand_device, &pca100_nand_board_info); + + /* only the i2c master 1 is used on this CPU card */ + i2c_register_board_info(1, pca100_i2c_devices, + ARRAY_SIZE(pca100_i2c_devices)); + + mxc_register_device(&mxc_i2c_device1, &pca100_i2c_1_data); + + mxc_gpio_mode(GPIO_PORTD | 28 | GPIO_GPIO | GPIO_OUT); + mxc_gpio_mode(GPIO_PORTD | 27 | GPIO_GPIO | GPIO_OUT); + + /* GPIO0_IRQ */ + mxc_gpio_mode(GPIO_PORTC | 31 | GPIO_GPIO | GPIO_IN); + /* GPIO1_IRQ */ + mxc_gpio_mode(GPIO_PORTC | 25 | GPIO_GPIO | GPIO_IN); + /* GPIO2_IRQ */ + mxc_gpio_mode(GPIO_PORTE | 5 | GPIO_GPIO | GPIO_IN); + +#if defined(CONFIG_SPI_IMX) || defined(CONFIG_SPI_IMX_MODULE) + spi_register_board_info(pca100_spi_board_info, + ARRAY_SIZE(pca100_spi_board_info)); + mxc_register_device(&mxc_spi_device0, &pca100_spi_0_data); +#endif + + platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices)); +} + +static void __init pca100_timer_init(void) +{ + mx27_clocks_init(26000000); +} + +static struct sys_timer pca100_timer = { + .init = pca100_timer_init, +}; + +MACHINE_START(PCA100, "phyCARD-i.MX27") + .phys_io = AIPI_BASE_ADDR, + .io_pg_offst = ((AIPI_BASE_ADDR_VIRT) >> 18) & 0xfffc, + .boot_params = PHYS_OFFSET + 0x100, + .map_io = mx27_map_io, + .init_irq = mxc_init_irq, + .init_machine = pca100_init, + .timer = &pca100_timer, +MACHINE_END + -- cgit v1.2.3 From 7bc07ebc7d2e9ad57baf205840ce31e9243ed5e8 Mon Sep 17 00:00:00 2001 From: Sascha Hauer Date: Fri, 17 Apr 2009 16:52:25 +0200 Subject: mx3x: Fixup USB base addresses The i.MX31 and the i.MX35 have different USB base addresses. Adjust the resources accordingly. Signed-off-by: Sascha Hauer --- arch/arm/mach-mx3/devices.c | 20 ++++++++++++++------ arch/arm/plat-mxc/include/mach/mx31.h | 2 +- arch/arm/plat-mxc/include/mach/mx35.h | 1 + 3 files changed, 16 insertions(+), 7 deletions(-) diff --git a/arch/arm/mach-mx3/devices.c b/arch/arm/mach-mx3/devices.c index cde1b079242..8a577f36725 100644 --- a/arch/arm/mach-mx3/devices.c +++ b/arch/arm/mach-mx3/devices.c @@ -366,8 +366,8 @@ struct platform_device mx3_camera = { static struct resource otg_resources[] = { { - .start = OTG_BASE_ADDR, - .end = OTG_BASE_ADDR + 0x1ff, + .start = MX31_OTG_BASE_ADDR, + .end = MX31_OTG_BASE_ADDR + 0x1ff, .flags = IORESOURCE_MEM, }, { .start = MXC_INT_USB3, @@ -408,8 +408,8 @@ static u64 usbh1_dmamask = ~(u32)0; static struct resource mxc_usbh1_resources[] = { { - .start = OTG_BASE_ADDR + 0x200, - .end = OTG_BASE_ADDR + 0x3ff, + .start = MX31_OTG_BASE_ADDR + 0x200, + .end = MX31_OTG_BASE_ADDR + 0x3ff, .flags = IORESOURCE_MEM, }, { .start = MXC_INT_USB1, @@ -434,8 +434,8 @@ static u64 usbh2_dmamask = ~(u32)0; static struct resource mxc_usbh2_resources[] = { { - .start = OTG_BASE_ADDR + 0x400, - .end = OTG_BASE_ADDR + 0x5ff, + .start = MX31_OTG_BASE_ADDR + 0x400, + .end = MX31_OTG_BASE_ADDR + 0x5ff, .flags = IORESOURCE_MEM, }, { .start = MXC_INT_USB2, @@ -547,6 +547,14 @@ static int mx3_devices_init(void) if (cpu_is_mx35()) { mxc_nand_resources[0].start = MX35_NFC_BASE_ADDR; mxc_nand_resources[0].end = MX35_NFC_BASE_ADDR + 0xfff; + otg_resources[0].start = MX35_OTG_BASE_ADDR; + otg_resources[0].end = MX35_OTG_BASE_ADDR + 0x1ff; + otg_resources[1].start = MXC_INT_USBOTG; + otg_resources[1].end = MXC_INT_USBOTG; + mxc_usbh1_resources[0].start = MX35_OTG_BASE_ADDR + 0x400; + mxc_usbh1_resources[0].end = MX35_OTG_BASE_ADDR + 0x5ff; + mxc_usbh1_resources[1].start = MXC_INT_USBHS; + mxc_usbh1_resources[1].end = MXC_INT_USBHS; } return 0; diff --git a/arch/arm/plat-mxc/include/mach/mx31.h b/arch/arm/plat-mxc/include/mach/mx31.h index 0b06941b613..14ac0dcc82f 100644 --- a/arch/arm/plat-mxc/include/mach/mx31.h +++ b/arch/arm/plat-mxc/include/mach/mx31.h @@ -4,7 +4,7 @@ #define MX31_IRAM_BASE_ADDR 0x1FFC0000 /* internal ram */ #define MX31_IRAM_SIZE SZ_16K -#define OTG_BASE_ADDR (AIPS1_BASE_ADDR + 0x00088000) +#define MX31_OTG_BASE_ADDR (AIPS1_BASE_ADDR + 0x00088000) #define ATA_BASE_ADDR (AIPS1_BASE_ADDR + 0x0008C000) #define UART4_BASE_ADDR (AIPS1_BASE_ADDR + 0x000B0000) #define UART5_BASE_ADDR (AIPS1_BASE_ADDR + 0x000B4000) diff --git a/arch/arm/plat-mxc/include/mach/mx35.h b/arch/arm/plat-mxc/include/mach/mx35.h index 6465fefb42e..ab4cfec6c8a 100644 --- a/arch/arm/plat-mxc/include/mach/mx35.h +++ b/arch/arm/plat-mxc/include/mach/mx35.h @@ -5,6 +5,7 @@ #define MX35_IRAM_SIZE SZ_128K #define MXC_FEC_BASE_ADDR 0x50038000 +#define MX35_OTG_BASE_ADDR 0x53ff4000 #define MX35_NFC_BASE_ADDR 0xBB000000 /* -- cgit v1.2.3 From 3fd2691a1dc80e42e6524bcbc228b1d35424d013 Mon Sep 17 00:00:00 2001 From: Sascha Hauer Date: Fri, 20 Mar 2009 19:25:01 +0100 Subject: MX31 Fix spi clock names Fix the SPI clock names to match the device names. Signed-off-by: Sascha Hauer --- arch/arm/mach-mx3/clock.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/arch/arm/mach-mx3/clock.c b/arch/arm/mach-mx3/clock.c index 4742554e996..06bd6180bfc 100644 --- a/arch/arm/mach-mx3/clock.c +++ b/arch/arm/mach-mx3/clock.c @@ -525,9 +525,9 @@ DEFINE_CLOCK(ckil_clk, 0, NULL, 0, clk_ckil_get_rate, NULL, NULL); static struct clk_lookup lookups[] = { _REGISTER_CLOCK(NULL, "emi", emi_clk) - _REGISTER_CLOCK(NULL, "cspi", cspi1_clk) - _REGISTER_CLOCK(NULL, "cspi", cspi2_clk) - _REGISTER_CLOCK(NULL, "cspi", cspi3_clk) + _REGISTER_CLOCK("spi_imx.0", NULL, cspi1_clk) + _REGISTER_CLOCK("spi_imx.1", NULL, cspi2_clk) + _REGISTER_CLOCK("spi_imx.2", NULL, cspi3_clk) _REGISTER_CLOCK(NULL, "gpt", gpt_clk) _REGISTER_CLOCK(NULL, "pwm", pwm_clk) _REGISTER_CLOCK(NULL, "wdog", wdog_clk) -- cgit v1.2.3 From 0160651a65d091f9fb3b7955347e04c1125765f8 Mon Sep 17 00:00:00 2001 From: Luotao Fu Date: Thu, 18 Jun 2009 12:21:51 +0200 Subject: pcm038: mux configuration for predefined gpio line Signed-off-by: Luotao Fu --- arch/arm/mach-mx2/pcm038.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/arch/arm/mach-mx2/pcm038.c b/arch/arm/mach-mx2/pcm038.c index 9a3483c8f58..ee65dda584c 100644 --- a/arch/arm/mach-mx2/pcm038.c +++ b/arch/arm/mach-mx2/pcm038.c @@ -216,6 +216,9 @@ static void __init pcm038_init(void) mxc_register_device(&mxc_i2c_device1, &pcm038_i2c_1_data); + /* PE18 for user-LED D40 */ + mxc_gpio_mode(GPIO_PORTE | 18 | GPIO_GPIO | GPIO_OUT); + platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices)); #ifdef CONFIG_MACH_PCM970_BASEBOARD -- cgit v1.2.3 From 8d5c1ed3f639f6ae012332d8ccdff429f3f11823 Mon Sep 17 00:00:00 2001 From: Luotao Fu Date: Thu, 18 Jun 2009 14:15:22 +0200 Subject: pcm043: mux configuration for predefined gpio line Signed-off-by: Luotao Fu --- arch/arm/mach-mx3/pcm043.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/arch/arm/mach-mx3/pcm043.c b/arch/arm/mach-mx3/pcm043.c index e43276ea3b7..e18a224671f 100644 --- a/arch/arm/mach-mx3/pcm043.c +++ b/arch/arm/mach-mx3/pcm043.c @@ -202,7 +202,8 @@ static struct pad_desc pcm043_pads[] = { MX35_PAD_D3_VSYNC__IPU_DISPB_D3_VSYNC, MX35_PAD_D3_REV__IPU_DISPB_D3_REV, MX35_PAD_D3_CLS__IPU_DISPB_D3_CLS, - MX35_PAD_D3_SPL__IPU_DISPB_D3_SPL + /* gpio */ + MX35_PAD_ATA_CS0__GPIO2_6, }; /* -- cgit v1.2.3 From e0fd4db372896d74e63097ee6463f97736440529 Mon Sep 17 00:00:00 2001 From: Luotao Fu Date: Thu, 18 Jun 2009 16:44:18 +0200 Subject: pcm037: mux configuration for predefined gpio line Signed-off-by: Luotao Fu --- arch/arm/mach-mx3/pcm037.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/arch/arm/mach-mx3/pcm037.c b/arch/arm/mach-mx3/pcm037.c index b1b3282d15d..6cbaabedf38 100644 --- a/arch/arm/mach-mx3/pcm037.c +++ b/arch/arm/mach-mx3/pcm037.c @@ -170,6 +170,8 @@ static unsigned int pcm037_pins[] = { MX31_PIN_CSI_MCLK__CSI_MCLK, MX31_PIN_CSI_PIXCLK__CSI_PIXCLK, MX31_PIN_CSI_VSYNC__CSI_VSYNC, + /* GPIO */ + IOMUX_MODE(MX31_PIN_ATA_DMACK, IOMUX_CONFIG_GPIO), }; static struct physmap_flash_data pcm037_flash_data = { -- cgit v1.2.3 From 4bd1527a64f847a8aaec4f6055d9498db2646626 Mon Sep 17 00:00:00 2001 From: Valentin Longchamp Date: Wed, 12 Aug 2009 11:29:18 +0200 Subject: mx31: define various GPIOs used on mx31moboard Signed-off-by: Valentin Longchamp Signed-off-by: Sascha Hauer --- arch/arm/plat-mxc/include/mach/iomux-mx3.h | 11 +++++++++++ 1 file changed, 11 insertions(+) diff --git a/arch/arm/plat-mxc/include/mach/iomux-mx3.h b/arch/arm/plat-mxc/include/mach/iomux-mx3.h index 67452732794..446f8676381 100644 --- a/arch/arm/plat-mxc/include/mach/iomux-mx3.h +++ b/arch/arm/plat-mxc/include/mach/iomux-mx3.h @@ -683,6 +683,17 @@ enum iomux_pins { #define MX31_PIN_GPIO3_1__GPIO3_1 IOMUX_MODE(MX31_PIN_GPIO3_1, IOMUX_CONFIG_GPIO) #define MX31_PIN_TXD2__GPIO1_28 IOMUX_MODE(MX31_PIN_TXD2, IOMUX_CONFIG_GPIO) #define MX31_PIN_GPIO1_0__GPIO1_0 IOMUX_MODE(MX31_PIN_GPIO1_0, IOMUX_CONFIG_GPIO) +#define MX31_PIN_SVEN0__GPIO2_0 IOMUX_MODE(MX31_PIN_SVEN0, IOMUX_CONFIG_GPIO) +#define MX31_PIN_STX0__GPIO2_1 IOMUX_MODE(MX31_PIN_STX0, IOMUX_CONFIG_GPIO) +#define MX31_PIN_SRX0__GPIO2_2 IOMUX_MODE(MX31_PIN_SRX0, IOMUX_CONFIG_GPIO) +#define MX31_PIN_SIMPD0__GPIO2_3 IOMUX_MODE(MX31_PIN_SIMPD0, IOMUX_CONFIG_GPIO) +#define MX31_PIN_DTR_DCE1__GPIO2_8 IOMUX_MODE(MX31_PIN_DTR_DCE1, IOMUX_CONFIG_GPIO) +#define MX31_PIN_DSR_DCE1__GPIO2_9 IOMUX_MODE(MX31_PIN_DSR_DCE1, IOMUX_CONFIG_GPIO) +#define MX31_PIN_RI_DCE1__GPIO2_10 IOMUX_MODE(MX31_PIN_RI_DCE1, IOMUX_CONFIG_GPIO) +#define MX31_PIN_DCD_DCE1__GPIO2_11 IOMUX_MODE(MX31_PIN_DCD_DCE1, IOMUX_CONFIG_GPIO) +#define MX31_PIN_STXD5__GPIO1_21 IOMUX_MODE(MX31_PIN_STXD5, IOMUX_CONFIG_GPIO) +#define MX31_PIN_SRXD5__GPIO1_22 IOMUX_MODE(MX31_PIN_SRXD5, IOMUX_CONFIG_GPIO) + /*XXX: The SS0, SS1, SS2, SS3 lines of spi3 are multiplexed by cspi2_ss0, cspi2_ss1, cspi1_ss0 * cspi1_ss1*/ -- cgit v1.2.3 From 77aa561db19229a36859018277f41be88684b487 Mon Sep 17 00:00:00 2001 From: Valentin Longchamp Date: Wed, 12 Aug 2009 11:29:19 +0200 Subject: mx31moboard: support for the 4 leds used on mx31moboard Signed-off-by: Valentin Longchamp Signed-off-by: Sascha Hauer --- arch/arm/mach-mx3/mx31moboard.c | 35 +++++++++++++++++++++++++++++++++++ 1 file changed, 35 insertions(+) diff --git a/arch/arm/mach-mx3/mx31moboard.c b/arch/arm/mach-mx3/mx31moboard.c index 2852bd58eda..ac337d26409 100644 --- a/arch/arm/mach-mx3/mx31moboard.c +++ b/arch/arm/mach-mx3/mx31moboard.c @@ -21,6 +21,7 @@ #include #include #include +#include #include #include #include @@ -72,6 +73,9 @@ static unsigned int moboard_pins[] = { MX31_PIN_USBOTG_CLK__USBOTG_CLK, MX31_PIN_USBOTG_DIR__USBOTG_DIR, MX31_PIN_USBOTG_NXT__USBOTG_NXT, MX31_PIN_USBOTG_STP__USBOTG_STP, MX31_PIN_USB_OC__GPIO1_30, + /* LEDs */ + MX31_PIN_SVEN0__GPIO2_0, MX31_PIN_STX0__GPIO2_1, + MX31_PIN_SRX0__GPIO2_2, MX31_PIN_SIMPD0__GPIO2_3, }; static struct physmap_flash_data mx31moboard_flash_data = { @@ -201,8 +205,39 @@ static struct fsl_usb2_platform_data usb_pdata = { .phy_mode = FSL_USB2_PHY_ULPI, }; +static struct gpio_led mx31moboard_leds[] = { + { + .name = "coreboard-led-0:red:running", + .default_trigger = "heartbeat", + .gpio = IOMUX_TO_GPIO(MX31_PIN_SVEN0), + }, { + .name = "coreboard-led-1:red", + .gpio = IOMUX_TO_GPIO(MX31_PIN_STX0), + }, { + .name = "coreboard-led-2:red", + .gpio = IOMUX_TO_GPIO(MX31_PIN_SRX0), + }, { + .name = "coreboard-led-3:red", + .gpio = IOMUX_TO_GPIO(MX31_PIN_SIMPD0), + }, +}; + +static struct gpio_led_platform_data mx31moboard_led_pdata = { + .num_leds = ARRAY_SIZE(mx31moboard_leds), + .leds = mx31moboard_leds, +}; + +static struct platform_device mx31moboard_leds_device = { + .name = "leds-gpio", + .id = -1, + .dev = { + .platform_data = &mx31moboard_led_pdata, + }, +}; + static struct platform_device *devices[] __initdata = { &mx31moboard_flash, + &mx31moboard_leds_device, }; static int mx31moboard_baseboard; -- cgit v1.2.3 From 8b1a540c245d68a77dbd909359cfc709b6a3a1bf Mon Sep 17 00:00:00 2001 From: Valentin Longchamp Date: Wed, 12 Aug 2009 11:29:20 +0200 Subject: mx31moboard: initialize 4 input gpios for mx31moboard These gpios are exported to userspace and are here to be used as a selector Signed-off-by: Valentin Longchamp Signed-off-by: Sascha Hauer --- arch/arm/mach-mx3/mx31moboard.c | 33 +++++++++++++++++++++++++++++++++ 1 file changed, 33 insertions(+) diff --git a/arch/arm/mach-mx3/mx31moboard.c b/arch/arm/mach-mx3/mx31moboard.c index ac337d26409..d3c6bb26271 100644 --- a/arch/arm/mach-mx3/mx31moboard.c +++ b/arch/arm/mach-mx3/mx31moboard.c @@ -76,6 +76,9 @@ static unsigned int moboard_pins[] = { /* LEDs */ MX31_PIN_SVEN0__GPIO2_0, MX31_PIN_STX0__GPIO2_1, MX31_PIN_SRX0__GPIO2_2, MX31_PIN_SIMPD0__GPIO2_3, + /* SEL */ + MX31_PIN_DTR_DCE1__GPIO2_8, MX31_PIN_DSR_DCE1__GPIO2_9, + MX31_PIN_RI_DCE1__GPIO2_10, MX31_PIN_DCD_DCE1__GPIO2_11, }; static struct physmap_flash_data mx31moboard_flash_data = { @@ -235,6 +238,34 @@ static struct platform_device mx31moboard_leds_device = { }, }; +#define SEL0 IOMUX_TO_GPIO(MX31_PIN_DTR_DCE1) +#define SEL1 IOMUX_TO_GPIO(MX31_PIN_DSR_DCE1) +#define SEL2 IOMUX_TO_GPIO(MX31_PIN_RI_DCE1) +#define SEL3 IOMUX_TO_GPIO(MX31_PIN_DCD_DCE1) + +static void mx31moboard_init_sel_gpios(void) +{ + if (!gpio_request(SEL0, "sel0")) { + gpio_direction_input(SEL0); + gpio_export(SEL0, true); + } + + if (!gpio_request(SEL1, "sel1")) { + gpio_direction_input(SEL1); + gpio_export(SEL1, true); + } + + if (!gpio_request(SEL2, "sel2")) { + gpio_direction_input(SEL2); + gpio_export(SEL2, true); + } + + if (!gpio_request(SEL3, "sel3")) { + gpio_direction_input(SEL3); + gpio_export(SEL3, true); + } +} + static struct platform_device *devices[] __initdata = { &mx31moboard_flash, &mx31moboard_leds_device, @@ -256,6 +287,8 @@ static void __init mxc_board_init(void) mxc_register_device(&mxc_uart_device0, &uart_pdata); mxc_register_device(&mxc_uart_device4, &uart_pdata); + mx31moboard_init_sel_gpios(); + mxc_register_device(&mxc_i2c_device0, &moboard_i2c0_pdata); mxc_register_device(&mxc_i2c_device1, &moboard_i2c1_pdata); -- cgit v1.2.3 From 2718c15c5fffa9d05e5076451ab4fc81caac313f Mon Sep 17 00:00:00 2001 From: Valentin Longchamp Date: Wed, 12 Aug 2009 11:29:21 +0200 Subject: mx31moboard: two GPIOS are used to reset other microcontrolers on the robot Signed-off-by: Valentin Longchamp Signed-off-by: Sascha Hauer --- arch/arm/mach-mx3/mx31moboard-marxbot.c | 20 ++++++++++++++++++++ 1 file changed, 20 insertions(+) diff --git a/arch/arm/mach-mx3/mx31moboard-marxbot.c b/arch/arm/mach-mx3/mx31moboard-marxbot.c index 53ce7ff0637..3e2b73051b9 100644 --- a/arch/arm/mach-mx3/mx31moboard-marxbot.c +++ b/arch/arm/mach-mx3/mx31moboard-marxbot.c @@ -47,6 +47,8 @@ static unsigned int marxbot_pins[] = { MX31_PIN_CSI_PIXCLK__CSI_PIXCLK, MX31_PIN_CSI_VSYNC__CSI_VSYNC, MX31_PIN_GPIO3_0__GPIO3_0, MX31_PIN_GPIO3_1__GPIO3_1, MX31_PIN_TXD2__GPIO1_28, + /* dsPIC resets */ + MX31_PIN_STXD5__GPIO1_21, MX31_PIN_SRXD5__GPIO1_22, }; #define SDHC2_CD IOMUX_TO_GPIO(MX31_PIN_ATA_DIOR) @@ -102,6 +104,22 @@ static struct imxmmc_platform_data sdhc2_pdata = { .exit = marxbot_sdhc2_exit, }; +#define TRSLAT_RST_B IOMUX_TO_GPIO(MX31_PIN_STXD5) +#define DSPICS_RST_B IOMUX_TO_GPIO(MX31_PIN_SRXD5) + +static void dspics_resets_init(void) +{ + if (!gpio_request(TRSLAT_RST_B, "translator-rst")) { + gpio_direction_output(TRSLAT_RST_B, 1); + gpio_export(TRSLAT_RST_B, false); + } + + if (!gpio_request(DSPICS_RST_B, "dspics-rst")) { + gpio_direction_output(DSPICS_RST_B, 1); + gpio_export(DSPICS_RST_B, false); + } +} + /* * system init for baseboard usage. Will be called by mx31moboard init. */ @@ -112,5 +130,7 @@ void __init mx31moboard_marxbot_init(void) mxc_iomux_setup_multiple_pins(marxbot_pins, ARRAY_SIZE(marxbot_pins), "marxbot"); + dspics_resets_init(); + mxc_register_device(&mxcsdhc_device1, &sdhc2_pdata); } -- cgit v1.2.3 From f6d2fa7dcbd438da4d150f695ebd219419a325ce Mon Sep 17 00:00:00 2001 From: Sascha Hauer Date: Thu, 13 Aug 2009 10:02:30 +0200 Subject: MX21: Compilation fix for devices.c The OTG devices are only available on i.MX27, so ifdef them out for i.MX21. Signed-off-by: Sascha Hauer --- arch/arm/mach-mx2/devices.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/arch/arm/mach-mx2/devices.c b/arch/arm/mach-mx2/devices.c index 62810cbe4e3..50199aff014 100644 --- a/arch/arm/mach-mx2/devices.c +++ b/arch/arm/mach-mx2/devices.c @@ -437,6 +437,7 @@ struct platform_device mxc_sdhc_device1 = { .resource = mxc_sdhc2_resources, }; +#ifdef CONFIG_MACH_MX27 static struct resource otg_resources[] = { { .start = OTG_BASE_ADDR, @@ -527,7 +528,7 @@ struct platform_device mxc_usbh2 = { .resource = mxc_usbh2_resources, .num_resources = ARRAY_SIZE(mxc_usbh2_resources), }; - +#endif /* GPIO port description */ static struct mxc_gpio_port imx_gpio_ports[] = { -- cgit v1.2.3 From c35d3a418149f145ff0d90833db3e298e88de1ad Mon Sep 17 00:00:00 2001 From: Sascha Hauer Date: Thu, 13 Aug 2009 10:04:44 +0200 Subject: mx21ads: Fix framebuffer platform data struct imx_fb_platform_data has changed and the mx21ads was forgotten to change. Fix it. Signed-off-by: Sascha Hauer --- arch/arm/mach-mx2/mx21ads.c | 44 ++++++++++++++++++++++++++------------------ 1 file changed, 26 insertions(+), 18 deletions(-) diff --git a/arch/arm/mach-mx2/mx21ads.c b/arch/arm/mach-mx2/mx21ads.c index a525783ceea..cf5f77cbc2f 100644 --- a/arch/arm/mach-mx2/mx21ads.c +++ b/arch/arm/mach-mx2/mx21ads.c @@ -164,25 +164,33 @@ static void mx21ads_fb_exit(struct platform_device *pdev) * Connected is a portrait Sharp-QVGA display * of type: LQ035Q7DB02 */ +static struct imx_fb_videomode mx21ads_modes[] = { + { + .mode = { + .name = "Sharp-LQ035Q7", + .refresh = 60, + .xres = 240, + .yres = 320, + .pixclock = 188679, /* in ps (5.3MHz) */ + .hsync_len = 2, + .left_margin = 6, + .right_margin = 16, + .vsync_len = 1, + .upper_margin = 8, + .lower_margin = 10, + }, + .pcr = 0xfb108bc7, + .bpp = 16, + }, +}; + static struct imx_fb_platform_data mx21ads_fb_data = { - .pixclock = 188679, /* in ps */ - .xres = 240, - .yres = 320, - - .bpp = 16, - .hsync_len = 2, - .left_margin = 6, - .right_margin = 16, - - .vsync_len = 1, - .upper_margin = 8, - .lower_margin = 10, - .fixed_screen_cpu = 0, - - .pcr = 0xFB108BC7, - .pwmr = 0x00A901ff, - .lscr1 = 0x00120300, - .dmacr = 0x00020008, + .mode = mx21ads_modes, + .num_modes = ARRAY_SIZE(mx21ads_modes), + + .pwmr = 0x00a903ff, + .lscr1 = 0x00120300, + .dmacr = 0x00020008, .init = mx21ads_fb_init, .exit = mx21ads_fb_exit, -- cgit v1.2.3 From ff54b4578448d616eb177e216acd599ecf5ee5b1 Mon Sep 17 00:00:00 2001 From: Byungho Min Date: Tue, 23 Jun 2009 21:39:49 +0900 Subject: ARM: S5PC100: Memory map S5PC100's the physical IO space starts at 0xe000"0000. To maximize space for vmalloc, the virtual IO space starts at 0xf400"0000 as same as other samsung CPUs(s3c24xx and s3c64xx) do. Signed-off-by: Byungho Min [ben-linux@fluff.org: subject and description fixup] Signed-off-by: Ben Dooks --- arch/arm/mach-s5pc100/include/mach/map.h | 75 +++++++++++++++++++++++++++++ arch/arm/mach-s5pc100/include/mach/memory.h | 18 +++++++ 2 files changed, 93 insertions(+) create mode 100644 arch/arm/mach-s5pc100/include/mach/map.h create mode 100644 arch/arm/mach-s5pc100/include/mach/memory.h diff --git a/arch/arm/mach-s5pc100/include/mach/map.h b/arch/arm/mach-s5pc100/include/mach/map.h new file mode 100644 index 00000000000..9e9f39130b2 --- /dev/null +++ b/arch/arm/mach-s5pc100/include/mach/map.h @@ -0,0 +1,75 @@ +/* linux/arch/arm/mach-s5pc100/include/mach/map.h + * + * Copyright 2009 Samsung Electronics Co. + * Byungho Min + * + * Based on mach-s3c6400/include/mach/map.h + * + * S5PC1XX - Memory map definitions + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#ifndef __ASM_ARCH_MAP_H +#define __ASM_ARCH_MAP_H __FILE__ + +#include + + +/* Chip ID */ +#define S5PC100_PA_CHIPID (0xE0000000) +#define S5PC1XX_PA_CHIPID S5PC100_PA_CHIPID +#define S5PC1XX_VA_CHIPID S3C_VA_SYS + +/* System */ +#define S5PC100_PA_SYS (0xE0100000) +#define S5PC100_PA_CLK (S5PC100_PA_SYS + 0x0) +#define S5PC100_PA_PWR (S5PC100_PA_SYS + 0x8000) +#define S5PC1XX_PA_CLK S5PC100_PA_CLK +#define S5PC1XX_PA_PWR S5PC100_PA_PWR +#define S5PC1XX_VA_CLK (S3C_VA_SYS + 0x10000) +#define S5PC1XX_VA_PWR (S3C_VA_SYS + 0x20000) + +/* Interrupt */ +#define S5PC100_PA_VIC (0xE4000000) +#define S5PC100_VA_VIC S3C_VA_IRQ +#define S5PC100_PA_VIC_OFFSET 0x100000 +#define S5PC100_VA_VIC_OFFSET 0x10000 +#define S5PC1XX_PA_VIC(x) (S5PC100_PA_VIC + ((x) * S5PC100_PA_VIC_OFFSET)) +#define S5PC1XX_VA_VIC(x) (S5PC100_VA_VIC + ((x) * S5PC100_VA_VIC_OFFSET)) + +/* Timer */ +#define S5PC100_PA_TIMER (0xEA000000) +#define S5PC1XX_PA_TIMER S5PC100_PA_TIMER +#define S5PC1XX_VA_TIMER S3C_VA_TIMER + +/* UART */ +#define S5PC100_PA_UART (0xEC000000) +#define S5PC1XX_PA_UART S5PC100_PA_UART +#define S5PC1XX_VA_UART S3C_VA_UART + +/* IIC */ +#define S5PC100_PA_IIC (0xEC100000) + +/* ETC */ +#define S5PC100_PA_SDRAM (0x20000000) + +/* compatibility defines. */ +#define S3C_PA_UART S5PC100_PA_UART +#define S3C_PA_UART0 (S5PC100_PA_UART + 0x0) +#define S3C_PA_UART1 (S5PC100_PA_UART + 0x400) +#define S3C_PA_UART2 (S5PC100_PA_UART + 0x800) +#define S3C_PA_UART3 (S5PC100_PA_UART + 0xC00) +#define S3C_VA_UART0 (S3C_VA_UART + 0x0) +#define S3C_VA_UART1 (S3C_VA_UART + 0x400) +#define S3C_VA_UART2 (S3C_VA_UART + 0x800) +#define S3C_VA_UART3 (S3C_VA_UART + 0xC00) +#define S3C_UART_OFFSET 0x400 +#define S3C_VA_VIC0 (S3C_VA_IRQ + 0x0) +#define S3C_VA_VIC1 (S3C_VA_IRQ + 0x10000) +#define S3C_VA_VIC2 (S3C_VA_IRQ + 0x20000) +#define S3C_PA_IIC S5PC100_PA_IIC + +#endif /* __ASM_ARCH_C100_MAP_H */ diff --git a/arch/arm/mach-s5pc100/include/mach/memory.h b/arch/arm/mach-s5pc100/include/mach/memory.h new file mode 100644 index 00000000000..4b60d18179f --- /dev/null +++ b/arch/arm/mach-s5pc100/include/mach/memory.h @@ -0,0 +1,18 @@ +/* arch/arm/mach-s5pc100/include/mach/memory.h + * + * Copyright 2008 Samsung Electronics Co. + * Byungho Min + * + * Based on mach-s3c6400/include/mach/memory.h + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#ifndef __ASM_ARCH_MEMORY_H +#define __ASM_ARCH_MEMORY_H + +#define PHYS_OFFSET UL(0x20000000) + +#endif -- cgit v1.2.3 From 433a915fc6456ee3a4b740fe4d92caa78164fdce Mon Sep 17 00:00:00 2001 From: Byungho Min Date: Tue, 23 Jun 2009 21:40:09 +0900 Subject: ARM: S5PC100: UART and Serial Serial driver of S5PC100 is the same as S3C6400, so S5PC100 shares the serial driver with S3C6400. Uart driver is copied from plat-s3c64xx to plat-s5pc1xx, as I do not use plat-s3c64xx directory. Signed-off-by: Byungho Min [ben-linux@fluff.org: title fixup] Signed-off-by: Ben Dooks --- arch/arm/plat-s5pc1xx/dev-uart.c | 174 +++++++++++++++++++++++++++++++++++++++ drivers/serial/Kconfig | 9 +- drivers/serial/Makefile | 1 + 3 files changed, 183 insertions(+), 1 deletion(-) create mode 100644 arch/arm/plat-s5pc1xx/dev-uart.c diff --git a/arch/arm/plat-s5pc1xx/dev-uart.c b/arch/arm/plat-s5pc1xx/dev-uart.c new file mode 100644 index 00000000000..f749bc5407b --- /dev/null +++ b/arch/arm/plat-s5pc1xx/dev-uart.c @@ -0,0 +1,174 @@ +/* linux/arch/arm/plat-s5pc1xx/dev-uart.c + * + * Copyright 2009 Samsung Electronics Co. + * Byungho Min + * + * Based on plat-s3c64xx/dev-uart.c + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * +*/ + +#include +#include +#include +#include +#include + +#include +#include +#include +#include + +#include + +/* Serial port registrations */ + +/* 64xx uarts are closer together */ + +static struct resource s5pc1xx_uart0_resource[] = { + [0] = { + .start = S3C_PA_UART0, + .end = S3C_PA_UART0 + 0x100, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = IRQ_S3CUART_RX0, + .end = IRQ_S3CUART_RX0, + .flags = IORESOURCE_IRQ, + }, + [2] = { + .start = IRQ_S3CUART_TX0, + .end = IRQ_S3CUART_TX0, + .flags = IORESOURCE_IRQ, + + }, + [3] = { + .start = IRQ_S3CUART_ERR0, + .end = IRQ_S3CUART_ERR0, + .flags = IORESOURCE_IRQ, + } +}; + +static struct resource s5pc1xx_uart1_resource[] = { + [0] = { + .start = S3C_PA_UART1, + .end = S3C_PA_UART1 + 0x100, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = IRQ_S3CUART_RX1, + .end = IRQ_S3CUART_RX1, + .flags = IORESOURCE_IRQ, + }, + [2] = { + .start = IRQ_S3CUART_TX1, + .end = IRQ_S3CUART_TX1, + .flags = IORESOURCE_IRQ, + + }, + [3] = { + .start = IRQ_S3CUART_ERR1, + .end = IRQ_S3CUART_ERR1, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct resource s5pc1xx_uart2_resource[] = { + [0] = { + .start = S3C_PA_UART2, + .end = S3C_PA_UART2 + 0x100, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = IRQ_S3CUART_RX2, + .end = IRQ_S3CUART_RX2, + .flags = IORESOURCE_IRQ, + }, + [2] = { + .start = IRQ_S3CUART_TX2, + .end = IRQ_S3CUART_TX2, + .flags = IORESOURCE_IRQ, + + }, + [3] = { + .start = IRQ_S3CUART_ERR2, + .end = IRQ_S3CUART_ERR2, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct resource s5pc1xx_uart3_resource[] = { + [0] = { + .start = S3C_PA_UART3, + .end = S3C_PA_UART3 + 0x100, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = IRQ_S3CUART_RX3, + .end = IRQ_S3CUART_RX3, + .flags = IORESOURCE_IRQ, + }, + [2] = { + .start = IRQ_S3CUART_TX3, + .end = IRQ_S3CUART_TX3, + .flags = IORESOURCE_IRQ, + + }, + [3] = { + .start = IRQ_S3CUART_ERR3, + .end = IRQ_S3CUART_ERR3, + .flags = IORESOURCE_IRQ, + }, +}; + + +struct s3c24xx_uart_resources s5pc1xx_uart_resources[] __initdata = { + [0] = { + .resources = s5pc1xx_uart0_resource, + .nr_resources = ARRAY_SIZE(s5pc1xx_uart0_resource), + }, + [1] = { + .resources = s5pc1xx_uart1_resource, + .nr_resources = ARRAY_SIZE(s5pc1xx_uart1_resource), + }, + [2] = { + .resources = s5pc1xx_uart2_resource, + .nr_resources = ARRAY_SIZE(s5pc1xx_uart2_resource), + }, + [3] = { + .resources = s5pc1xx_uart3_resource, + .nr_resources = ARRAY_SIZE(s5pc1xx_uart3_resource), + }, +}; + +/* uart devices */ + +static struct platform_device s3c24xx_uart_device0 = { + .id = 0, +}; + +static struct platform_device s3c24xx_uart_device1 = { + .id = 1, +}; + +static struct platform_device s3c24xx_uart_device2 = { + .id = 2, +}; + +static struct platform_device s3c24xx_uart_device3 = { + .id = 3, +}; + +struct platform_device *s3c24xx_uart_src[4] = { + &s3c24xx_uart_device0, + &s3c24xx_uart_device1, + &s3c24xx_uart_device2, + &s3c24xx_uart_device3, +}; + +struct platform_device *s3c24xx_uart_devs[4] = { +}; + diff --git a/drivers/serial/Kconfig b/drivers/serial/Kconfig index 037c1e0b7c4..cdd552d33a7 100644 --- a/drivers/serial/Kconfig +++ b/drivers/serial/Kconfig @@ -459,7 +459,7 @@ config SERIAL_SAMSUNG_UARTS int depends on ARM && PLAT_S3C default 2 if ARCH_S3C2400 - default 4 if ARCH_S3C64XX || CPU_S3C2443 + default 4 if ARCH_S5PC1XX || ARCH_S3C64XX || CPU_S3C2443 default 3 help Select the number of available UART ports for the Samsung S3C @@ -533,6 +533,13 @@ config SERIAL_S3C6400 Serial port support for the Samsung S3C6400 and S3C6410 SoCs +config SERIAL_S5PC100 + tristate "Samsung S5PC100 Serial port support" + depends on SERIAL_SAMSUNG && CPU_S5PC100 + default y + help + Serial port support for the Samsung S5PC100 SoCs + config SERIAL_MAX3100 tristate "MAX3100 support" depends on SPI diff --git a/drivers/serial/Makefile b/drivers/serial/Makefile index d5a29981c6c..97f6fcc8b43 100644 --- a/drivers/serial/Makefile +++ b/drivers/serial/Makefile @@ -43,6 +43,7 @@ obj-$(CONFIG_SERIAL_S3C2412) += s3c2412.o obj-$(CONFIG_SERIAL_S3C2440) += s3c2440.o obj-$(CONFIG_SERIAL_S3C24A0) += s3c24a0.o obj-$(CONFIG_SERIAL_S3C6400) += s3c6400.o +obj-$(CONFIG_SERIAL_S5PC100) += s3c6400.o obj-$(CONFIG_SERIAL_MAX3100) += max3100.o obj-$(CONFIG_SERIAL_IP22_ZILOG) += ip22zilog.o obj-$(CONFIG_SERIAL_MUX) += mux.o -- cgit v1.2.3 From 8acd1ade2ede18408303c968e1449220c427a182 Mon Sep 17 00:00:00 2001 From: Byungho Min Date: Tue, 23 Jun 2009 21:40:15 +0900 Subject: ARM: S5PC100: CPU initialization Signed-off-by: Byungho Min [ben-linux@fluff.org: subject fixup] Signed-off-by: Ben Dooks --- arch/arm/mach-s5pc100/cpu.c | 97 ++++++++++++++++++++ arch/arm/mach-s5pc100/include/mach/debug-macro.S | 38 ++++++++ arch/arm/mach-s5pc100/include/mach/entry-macro.S | 50 ++++++++++ arch/arm/mach-s5pc100/include/mach/hardware.h | 14 +++ arch/arm/mach-s5pc100/include/mach/system.h | 24 +++++ arch/arm/mach-s5pc100/include/mach/uncompress.h | 28 ++++++ arch/arm/plat-s5pc1xx/cpu.c | 112 +++++++++++++++++++++++ arch/arm/plat-s5pc1xx/include/plat/s5pc100.h | 65 +++++++++++++ arch/arm/plat-s5pc1xx/s5pc100-init.c | 27 ++++++ 9 files changed, 455 insertions(+) create mode 100644 arch/arm/mach-s5pc100/cpu.c create mode 100644 arch/arm/mach-s5pc100/include/mach/debug-macro.S create mode 100644 arch/arm/mach-s5pc100/include/mach/entry-macro.S create mode 100644 arch/arm/mach-s5pc100/include/mach/hardware.h create mode 100644 arch/arm/mach-s5pc100/include/mach/system.h create mode 100644 arch/arm/mach-s5pc100/include/mach/uncompress.h create mode 100644 arch/arm/plat-s5pc1xx/cpu.c create mode 100644 arch/arm/plat-s5pc1xx/include/plat/s5pc100.h create mode 100644 arch/arm/plat-s5pc1xx/s5pc100-init.c diff --git a/arch/arm/mach-s5pc100/cpu.c b/arch/arm/mach-s5pc100/cpu.c new file mode 100644 index 00000000000..0e718890da3 --- /dev/null +++ b/arch/arm/mach-s5pc100/cpu.c @@ -0,0 +1,97 @@ +/* linux/arch/arm/mach-s5pc100/cpu.c + * + * Copyright 2009 Samsung Electronics Co. + * Byungho Min + * + * Based on mach-s3c6410/cpu.c + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include + +#include +#include +#include + +#include +#include + +#include +#include +#include +#include +#include +#include + +/* Initial IO mappings */ + +static struct map_desc s5pc100_iodesc[] __initdata = { +}; + +/* s5pc100_map_io + * + * register the standard cpu IO areas +*/ + +void __init s5pc100_map_io(void) +{ + iotable_init(s5pc100_iodesc, ARRAY_SIZE(s5pc100_iodesc)); + + /* initialise device information early */ +} + +void __init s5pc100_init_clocks(int xtal) +{ + printk(KERN_DEBUG "%s: initialising clocks\n", __func__); + s3c24xx_register_baseclocks(xtal); + s5pc1xx_register_clocks(); + s5pc100_register_clocks(); + s5pc100_setup_clocks(); +} + +void __init s5pc100_init_irq(void) +{ + u32 vic_valid[] = {~0, ~0, ~0}; + + /* VIC0, VIC1, and VIC2 are fully populated. */ + s5pc1xx_init_irq(vic_valid, ARRAY_SIZE(vic_valid)); +} + +struct sysdev_class s5pc100_sysclass = { + .name = "s5pc100-core", +}; + +static struct sys_device s5pc100_sysdev = { + .cls = &s5pc100_sysclass, +}; + +static int __init s5pc100_core_init(void) +{ + return sysdev_class_register(&s5pc100_sysclass); +} + +core_initcall(s5pc100_core_init); + +int __init s5pc100_init(void) +{ + printk(KERN_DEBUG "S5PC100: Initialising architecture\n"); + + return sysdev_register(&s5pc100_sysdev); +} diff --git a/arch/arm/mach-s5pc100/include/mach/debug-macro.S b/arch/arm/mach-s5pc100/include/mach/debug-macro.S new file mode 100644 index 00000000000..9d142ccf654 --- /dev/null +++ b/arch/arm/mach-s5pc100/include/mach/debug-macro.S @@ -0,0 +1,38 @@ +/* arch/arm/mach-s5pc100/include/mach/debug-macro.S + * + * Copyright 2009 Samsung Electronics Co. + * Byungho Min + * + * + * Based on mach-s3c6400/include/mach/debug-macro.S + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +/* pull in the relevant register and map files. */ + +#include +#include + + /* note, for the boot process to work we have to keep the UART + * virtual address aligned to an 1MiB boundary for the L1 + * mapping the head code makes. We keep the UART virtual address + * aligned and add in the offset when we load the value here. + */ + + .macro addruart, rx + mrc p15, 0, \rx, c1, c0 + tst \rx, #1 + ldreq \rx, = S3C_PA_UART + ldrne \rx, = (S3C_VA_UART + S3C_PA_UART & 0xfffff) + add \rx, \rx, #(0x400 * CONFIG_DEBUG_S3C_UART) + .endm + +/* include the reset of the code which will do the work, we're only + * compiling for a single cpu processor type so the default of s3c2440 + * will be fine with us. + */ + +#include diff --git a/arch/arm/mach-s5pc100/include/mach/entry-macro.S b/arch/arm/mach-s5pc100/include/mach/entry-macro.S new file mode 100644 index 00000000000..67131939e62 --- /dev/null +++ b/arch/arm/mach-s5pc100/include/mach/entry-macro.S @@ -0,0 +1,50 @@ +/* arch/arm/mach-s5pc100/include/mach/entry-macro.S + * + * Copyright 2009 Samsung Electronics Co. + * Byungho Min + * + * Based on mach-s3c6400/include/mach/entry-macro.S + * + * Low-level IRQ helper macros for the Samsung S5PC1XX series + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. +*/ + +#include +#include +#include + + .macro disable_fiq + .endm + + .macro get_irqnr_preamble, base, tmp + ldr \base, =S3C_VA_VIC0 + .endm + + .macro arch_ret_to_user, tmp1, tmp2 + .endm + + .macro get_irqnr_and_base, irqnr, irqstat, base, tmp + + @ check the vic0 + mov \irqnr, # S3C_IRQ_OFFSET + 31 + ldr \irqstat, [ \base, # VIC_IRQ_STATUS ] + teq \irqstat, #0 + + @ otherwise try vic1 + addeq \tmp, \base, #(S3C_VA_VIC1 - S3C_VA_VIC0) + addeq \irqnr, \irqnr, #32 + ldreq \irqstat, [ \tmp, # VIC_IRQ_STATUS ] + teqeq \irqstat, #0 + + @ otherwise try vic2 + addeq \tmp, \base, #(S3C_VA_VIC2 - S3C_VA_VIC0) + addeq \irqnr, \irqnr, #32 + ldreq \irqstat, [ \tmp, # VIC_IRQ_STATUS ] + teqeq \irqstat, #0 + + clzne \irqstat, \irqstat + subne \irqnr, \irqnr, \irqstat + .endm diff --git a/arch/arm/mach-s5pc100/include/mach/hardware.h b/arch/arm/mach-s5pc100/include/mach/hardware.h new file mode 100644 index 00000000000..38ce8206a1a --- /dev/null +++ b/arch/arm/mach-s5pc100/include/mach/hardware.h @@ -0,0 +1,14 @@ +/* linux/arch/arm/mach-s5pc100/include/mach/hardware.h + * + * Copyright 2009 Samsung Electronics Co. + * Byungho Min + * + * S3C6400 - Hardware support + */ + +#ifndef __ASM_ARCH_HARDWARE_H +#define __ASM_ARCH_HARDWARE_H __FILE__ + +/* currently nothing here, placeholder */ + +#endif /* __ASM_ARCH_HARDWARE_H */ diff --git a/arch/arm/mach-s5pc100/include/mach/system.h b/arch/arm/mach-s5pc100/include/mach/system.h new file mode 100644 index 00000000000..e3901437547 --- /dev/null +++ b/arch/arm/mach-s5pc100/include/mach/system.h @@ -0,0 +1,24 @@ +/* linux/arch/arm/mach-s5pc100/include/mach/system.h + * + * Copyright 2009 Samsung Electronics Co. + * Byungho Min + * + * S5PC1XX - system implementation + * + * Based on mach-s3c6400/include/mach/system.h + */ + +#ifndef __ASM_ARCH_SYSTEM_H +#define __ASM_ARCH_SYSTEM_H __FILE__ + +static void arch_idle(void) +{ + /* nothing here yet */ +} + +static void arch_reset(char mode, const char *cmd) +{ + /* nothing here yet */ +} + +#endif /* __ASM_ARCH_IRQ_H */ diff --git a/arch/arm/mach-s5pc100/include/mach/uncompress.h b/arch/arm/mach-s5pc100/include/mach/uncompress.h new file mode 100644 index 00000000000..01ccf535e76 --- /dev/null +++ b/arch/arm/mach-s5pc100/include/mach/uncompress.h @@ -0,0 +1,28 @@ +/* arch/arm/mach-s5pc100/include/mach/uncompress.h + * + * Copyright 2009 Samsung Electronics Co. + * Byungho Min + * + * S5PC100 - uncompress code + * + * Based on mach-s3c6400/include/mach/uncompress.h + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#ifndef __ASM_ARCH_UNCOMPRESS_H +#define __ASM_ARCH_UNCOMPRESS_H + +#include +#include + +static void arch_detect_cpu(void) +{ + /* we do not need to do any cpu detection here at the moment. */ + fifo_mask = S3C2440_UFSTAT_TXMASK; + fifo_max = 63 << S3C2440_UFSTAT_TXSHIFT; +} + +#endif /* __ASM_ARCH_UNCOMPRESS_H */ diff --git a/arch/arm/plat-s5pc1xx/cpu.c b/arch/arm/plat-s5pc1xx/cpu.c new file mode 100644 index 00000000000..715a7330794 --- /dev/null +++ b/arch/arm/plat-s5pc1xx/cpu.c @@ -0,0 +1,112 @@ +/* linux/arch/arm/plat-s5pc1xx/cpu.c + * + * Copyright 2009 Samsung Electronics Co. + * Byungho Min + * + * S5PC1XX CPU Support + * + * Based on plat-s3c64xx/cpu.c + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#include +#include +#include +#include +#include +#include +#include + +#include +#include + +#include + +#include + +#include +#include +#include + +#include + +/* table of supported CPUs */ + +static const char name_s5pc100[] = "S5PC100"; + +static struct cpu_table cpu_ids[] __initdata = { + { + .idcode = 0x43100000, + .idmask = 0xfffff000, + .map_io = s5pc100_map_io, + .init_clocks = s5pc100_init_clocks, + .init_uarts = s5pc100_init_uarts, + .init = s5pc100_init, + .name = name_s5pc100, + }, +}; +/* minimal IO mapping */ + +/* see notes on uart map in arch/arm/mach-s5pc100/include/mach/debug-macro.S */ +#define UART_OFFS (S3C_PA_UART & 0xffff) + +static struct map_desc s5pc1xx_iodesc[] __initdata = { + { + .virtual = (unsigned long)S5PC1XX_VA_CHIPID, + .pfn = __phys_to_pfn(S5PC1XX_PA_CHIPID), + .length = SZ_16, + .type = MT_DEVICE, + }, { + .virtual = (unsigned long)S5PC1XX_VA_CLK, + .pfn = __phys_to_pfn(S5PC1XX_PA_CLK), + .length = SZ_4K, + .type = MT_DEVICE, + }, { + .virtual = (unsigned long)S5PC1XX_VA_PWR, + .pfn = __phys_to_pfn(S5PC1XX_PA_PWR), + .length = SZ_4K, + .type = MT_DEVICE, + }, { + .virtual = (unsigned long)(S5PC1XX_VA_UART), + .pfn = __phys_to_pfn(S5PC1XX_PA_UART), + .length = SZ_4K, + .type = MT_DEVICE, + }, { + .virtual = (unsigned long)S5PC1XX_VA_VIC(0), + .pfn = __phys_to_pfn(S5PC1XX_PA_VIC(0)), + .length = SZ_4K, + .type = MT_DEVICE, + }, { + .virtual = (unsigned long)S5PC1XX_VA_VIC(1), + .pfn = __phys_to_pfn(S5PC1XX_PA_VIC(1)), + .length = SZ_4K, + .type = MT_DEVICE, + }, { + .virtual = (unsigned long)S5PC1XX_VA_VIC(2), + .pfn = __phys_to_pfn(S5PC1XX_PA_VIC(2)), + .length = SZ_4K, + .type = MT_DEVICE, + }, { + .virtual = (unsigned long)S5PC1XX_VA_TIMER, + .pfn = __phys_to_pfn(S5PC1XX_PA_TIMER), + .length = SZ_256, + .type = MT_DEVICE, + }, +}; + +/* read cpu identification code */ + +void __init s5pc1xx_init_io(struct map_desc *mach_desc, int size) +{ + unsigned long idcode; + + /* initialise the io descriptors we need for initialisation */ + iotable_init(s5pc1xx_iodesc, ARRAY_SIZE(s5pc1xx_iodesc)); + iotable_init(mach_desc, size); + + idcode = __raw_readl(S5PC1XX_VA_CHIPID); + s3c_init_cpu(idcode, cpu_ids, ARRAY_SIZE(cpu_ids)); +} diff --git a/arch/arm/plat-s5pc1xx/include/plat/s5pc100.h b/arch/arm/plat-s5pc1xx/include/plat/s5pc100.h new file mode 100644 index 00000000000..45e27513166 --- /dev/null +++ b/arch/arm/plat-s5pc1xx/include/plat/s5pc100.h @@ -0,0 +1,65 @@ +/* arch/arm/plat-s5pc1xx/include/plat/s5pc100.h + * + * Copyright 2009 Samsung Electronics Co. + * Byungho Min + * + * Header file for s5pc100 cpu support + * + * Based on plat-s3c64xx/include/plat/s3c6400.h + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +/* Common init code for S5PC100 related SoCs */ +extern int s5pc100_init(void); +extern void s5pc100_map_io(void); +extern void s5pc100_init_clocks(int xtal); +extern int s5pc100_register_baseclocks(unsigned long xtal); +extern void s5pc100_init_irq(void); +extern void s5pc100_init_io(struct map_desc *mach_desc, int size); +extern void s5pc100_common_init_uarts(struct s3c2410_uartcfg *cfg, int no); +extern void s5pc100_register_clocks(void); +extern void s5pc100_setup_clocks(void); +extern struct sysdev_class s5pc100_sysclass; + +#define s5pc100_init_uarts s5pc100_common_init_uarts + +/* Some day, belows will be moved to plat-s5pc/include/plat/cpu.h */ +extern void s5pc1xx_init_irq(u32 *vic_valid, int num); +extern void s5pc1xx_init_io(struct map_desc *mach_desc, int size); + +/* Some day, belows will be moved to plat-s5pc/include/plat/clock.h */ +extern struct clk clk_hpll; +extern struct clk clk_hd0; +extern struct clk clk_pd0; +extern struct clk clk_54m; +extern struct clk clk_dout_mpll2; +extern void s5pc1xx_register_clocks(void); +extern int s5pc1xx_sclk0_ctrl(struct clk *clk, int enable); +extern int s5pc1xx_sclk1_ctrl(struct clk *clk, int enable); + +/* Some day, belows will be moved to plat-s5pc/include/plat/devs.h */ +extern struct s3c24xx_uart_resources s5pc1xx_uart_resources[]; +extern struct platform_device s3c_device_g2d; +extern struct platform_device s3c_device_g3d; +extern struct platform_device s3c_device_vpp; +extern struct platform_device s3c_device_tvenc; +extern struct platform_device s3c_device_tvscaler; +extern struct platform_device s3c_device_rotator; +extern struct platform_device s3c_device_jpeg; +extern struct platform_device s3c_device_onenand; +extern struct platform_device s3c_device_usb_otghcd; +extern struct platform_device s3c_device_keypad; +extern struct platform_device s3c_device_ts; +extern struct platform_device s3c_device_g3d; +extern struct platform_device s3c_device_smc911x; +extern struct platform_device s3c_device_fimc0; +extern struct platform_device s3c_device_fimc1; +extern struct platform_device s3c_device_mfc; +extern struct platform_device s3c_device_ac97; +extern struct platform_device s3c_device_fimc0; +extern struct platform_device s3c_device_fimc1; +extern struct platform_device s3c_device_fimc2; + diff --git a/arch/arm/plat-s5pc1xx/s5pc100-init.c b/arch/arm/plat-s5pc1xx/s5pc100-init.c new file mode 100644 index 00000000000..c58710884ce --- /dev/null +++ b/arch/arm/plat-s5pc1xx/s5pc100-init.c @@ -0,0 +1,27 @@ +/* linux/arch/arm/plat-s5pc1xx/s5pc100-init.c + * + * Copyright 2009 Samsung Electronics Co. + * Byungho Min + * + * S5PC100 - CPU initialisation (common with other S5PC1XX chips) + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include +#include +#include + +#include +#include +#include + +/* uart registration process */ + +void __init s5pc100_common_init_uarts(struct s3c2410_uartcfg *cfg, int no) +{ + /* The driver name is s3c6400-uart to reuse s3c6400_serial_drv */ + s3c24xx_init_uartdevs("s3c6400-uart", s5pc1xx_uart_resources, cfg, no); +} -- cgit v1.2.3 From 0164cbf4390fbcd7125fc8d476a451a3efa14c5d Mon Sep 17 00:00:00 2001 From: Byungho Min Date: Tue, 23 Jun 2009 21:40:22 +0900 Subject: ARM: S5PC100: GPIO and I2C S5PC100 has more GPIO group then previous one. It has 34 groups of GPIO, while S3C6410 has 17 groups. For now, only header files are written. Signed-off-by: Byungho Min [ben-linux@fluff.org: subject fixup] Signed-off-by: Ben Dooks --- arch/arm/mach-s5pc100/include/mach/gpio-core.h | 21 ++++ arch/arm/mach-s5pc100/include/mach/gpio.h | 146 +++++++++++++++++++++++++ arch/arm/plat-s5pc1xx/setup-i2c0.c | 25 +++++ arch/arm/plat-s5pc1xx/setup-i2c1.c | 25 +++++ 4 files changed, 217 insertions(+) create mode 100644 arch/arm/mach-s5pc100/include/mach/gpio-core.h create mode 100644 arch/arm/mach-s5pc100/include/mach/gpio.h create mode 100644 arch/arm/plat-s5pc1xx/setup-i2c0.c create mode 100644 arch/arm/plat-s5pc1xx/setup-i2c1.c diff --git a/arch/arm/mach-s5pc100/include/mach/gpio-core.h b/arch/arm/mach-s5pc100/include/mach/gpio-core.h new file mode 100644 index 00000000000..ad28d8ec8a7 --- /dev/null +++ b/arch/arm/mach-s5pc100/include/mach/gpio-core.h @@ -0,0 +1,21 @@ +/* arch/arm/mach-s5pc100/include/mach/gpio-core.h + * + * Copyright 2009 Samsung Electronics Co. + * Byungho Min + * + * S5PC100 - GPIO core support + * + * Based on mach-s3c6400/include/mach/gpio-core.h + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#ifndef __ASM_ARCH_GPIO_CORE_H +#define __ASM_ARCH_GPIO_CORE_H __FILE__ + +/* currently we just include the platform support */ +#include + +#endif /* __ASM_ARCH_GPIO_CORE_H */ diff --git a/arch/arm/mach-s5pc100/include/mach/gpio.h b/arch/arm/mach-s5pc100/include/mach/gpio.h new file mode 100644 index 00000000000..c74fc93d7d1 --- /dev/null +++ b/arch/arm/mach-s5pc100/include/mach/gpio.h @@ -0,0 +1,146 @@ +/* arch/arm/mach-s5pc100/include/mach/gpio.h + * + * Copyright 2009 Samsung Electronics Co. + * Byungho Min + * + * S5PC100 - GPIO lib support + * + * Base on mach-s3c6400/include/mach/gpio.h + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#define gpio_get_value __gpio_get_value +#define gpio_set_value __gpio_set_value +#define gpio_cansleep __gpio_cansleep +#define gpio_to_irq __gpio_to_irq + +/* GPIO bank sizes */ +#define S5PC1XX_GPIO_A0_NR (8) +#define S5PC1XX_GPIO_A1_NR (5) +#define S5PC1XX_GPIO_B_NR (8) +#define S5PC1XX_GPIO_C_NR (5) +#define S5PC1XX_GPIO_D_NR (7) +#define S5PC1XX_GPIO_E0_NR (8) +#define S5PC1XX_GPIO_E1_NR (6) +#define S5PC1XX_GPIO_F0_NR (8) +#define S5PC1XX_GPIO_F1_NR (8) +#define S5PC1XX_GPIO_F2_NR (8) +#define S5PC1XX_GPIO_F3_NR (4) +#define S5PC1XX_GPIO_G0_NR (8) +#define S5PC1XX_GPIO_G1_NR (3) +#define S5PC1XX_GPIO_G2_NR (7) +#define S5PC1XX_GPIO_G3_NR (7) +#define S5PC1XX_GPIO_H0_NR (8) +#define S5PC1XX_GPIO_H1_NR (8) +#define S5PC1XX_GPIO_H2_NR (8) +#define S5PC1XX_GPIO_H3_NR (8) +#define S5PC1XX_GPIO_I_NR (8) +#define S5PC1XX_GPIO_J0_NR (8) +#define S5PC1XX_GPIO_J1_NR (5) +#define S5PC1XX_GPIO_J2_NR (8) +#define S5PC1XX_GPIO_J3_NR (8) +#define S5PC1XX_GPIO_J4_NR (4) +#define S5PC1XX_GPIO_K0_NR (8) +#define S5PC1XX_GPIO_K1_NR (6) +#define S5PC1XX_GPIO_K2_NR (8) +#define S5PC1XX_GPIO_K3_NR (8) +#define S5PC1XX_GPIO_MP00_NR (8) +#define S5PC1XX_GPIO_MP01_NR (8) +#define S5PC1XX_GPIO_MP02_NR (8) +#define S5PC1XX_GPIO_MP03_NR (8) +#define S5PC1XX_GPIO_MP04_NR (5) + +/* GPIO bank numbes */ + +/* CONFIG_S3C_GPIO_SPACE allows the user to select extra + * space for debugging purposes so that any accidental + * change from one gpio bank to another can be caught. +*/ + +#define S5PC1XX_GPIO_NEXT(__gpio) \ + ((__gpio##_START) + (__gpio##_NR) + CONFIG_S3C_GPIO_SPACE + 1) + +enum s3c_gpio_number { + S5PC1XX_GPIO_A0_START = 0, + S5PC1XX_GPIO_A1_START = S5PC1XX_GPIO_NEXT(S5PC1XX_GPIO_A0), + S5PC1XX_GPIO_B_START = S5PC1XX_GPIO_NEXT(S5PC1XX_GPIO_A1), + S5PC1XX_GPIO_C_START = S5PC1XX_GPIO_NEXT(S5PC1XX_GPIO_B), + S5PC1XX_GPIO_D_START = S5PC1XX_GPIO_NEXT(S5PC1XX_GPIO_C), + S5PC1XX_GPIO_E0_START = S5PC1XX_GPIO_NEXT(S5PC1XX_GPIO_D), + S5PC1XX_GPIO_E1_START = S5PC1XX_GPIO_NEXT(S5PC1XX_GPIO_E0), + S5PC1XX_GPIO_F0_START = S5PC1XX_GPIO_NEXT(S5PC1XX_GPIO_E1), + S5PC1XX_GPIO_F1_START = S5PC1XX_GPIO_NEXT(S5PC1XX_GPIO_F0), + S5PC1XX_GPIO_F2_START = S5PC1XX_GPIO_NEXT(S5PC1XX_GPIO_F1), + S5PC1XX_GPIO_F3_START = S5PC1XX_GPIO_NEXT(S5PC1XX_GPIO_F2), + S5PC1XX_GPIO_G0_START = S5PC1XX_GPIO_NEXT(S5PC1XX_GPIO_F3), + S5PC1XX_GPIO_G1_START = S5PC1XX_GPIO_NEXT(S5PC1XX_GPIO_G0), + S5PC1XX_GPIO_G2_START = S5PC1XX_GPIO_NEXT(S5PC1XX_GPIO_G1), + S5PC1XX_GPIO_G3_START = S5PC1XX_GPIO_NEXT(S5PC1XX_GPIO_G2), + S5PC1XX_GPIO_H0_START = S5PC1XX_GPIO_NEXT(S5PC1XX_GPIO_G3), + S5PC1XX_GPIO_H1_START = S5PC1XX_GPIO_NEXT(S5PC1XX_GPIO_H0), + S5PC1XX_GPIO_H2_START = S5PC1XX_GPIO_NEXT(S5PC1XX_GPIO_H1), + S5PC1XX_GPIO_H3_START = S5PC1XX_GPIO_NEXT(S5PC1XX_GPIO_H2), + S5PC1XX_GPIO_I_START = S5PC1XX_GPIO_NEXT(S5PC1XX_GPIO_H3), + S5PC1XX_GPIO_J0_START = S5PC1XX_GPIO_NEXT(S5PC1XX_GPIO_I), + S5PC1XX_GPIO_J1_START = S5PC1XX_GPIO_NEXT(S5PC1XX_GPIO_J0), + S5PC1XX_GPIO_J2_START = S5PC1XX_GPIO_NEXT(S5PC1XX_GPIO_J1), + S5PC1XX_GPIO_J3_START = S5PC1XX_GPIO_NEXT(S5PC1XX_GPIO_J2), + S5PC1XX_GPIO_J4_START = S5PC1XX_GPIO_NEXT(S5PC1XX_GPIO_J3), + S5PC1XX_GPIO_K0_START = S5PC1XX_GPIO_NEXT(S5PC1XX_GPIO_J4), + S5PC1XX_GPIO_K1_START = S5PC1XX_GPIO_NEXT(S5PC1XX_GPIO_K0), + S5PC1XX_GPIO_K2_START = S5PC1XX_GPIO_NEXT(S5PC1XX_GPIO_K1), + S5PC1XX_GPIO_K3_START = S5PC1XX_GPIO_NEXT(S5PC1XX_GPIO_K2), + S5PC1XX_GPIO_MP00_START = S5PC1XX_GPIO_NEXT(S5PC1XX_GPIO_K3), + S5PC1XX_GPIO_MP01_START = S5PC1XX_GPIO_NEXT(S5PC1XX_GPIO_MP00), + S5PC1XX_GPIO_MP02_START = S5PC1XX_GPIO_NEXT(S5PC1XX_GPIO_MP01), + S5PC1XX_GPIO_MP03_START = S5PC1XX_GPIO_NEXT(S5PC1XX_GPIO_MP02), + S5PC1XX_GPIO_MP04_START = S5PC1XX_GPIO_NEXT(S5PC1XX_GPIO_MP03), +}; + +/* S5PC1XX GPIO number definitions. */ +#define S5PC1XX_GPA0(_nr) (S5PC1XX_GPIO_A0_START + (_nr)) +#define S5PC1XX_GPA1(_nr) (S5PC1XX_GPIO_A1_START + (_nr)) +#define S5PC1XX_GPB(_nr) (S5PC1XX_GPIO_B_START + (_nr)) +#define S5PC1XX_GPC(_nr) (S5PC1XX_GPIO_C_START + (_nr)) +#define S5PC1XX_GPD(_nr) (S5PC1XX_GPIO_D_START + (_nr)) +#define S5PC1XX_GPE0(_nr) (S5PC1XX_GPIO_E0_START + (_nr)) +#define S5PC1XX_GPE1(_nr) (S5PC1XX_GPIO_E1_START + (_nr)) +#define S5PC1XX_GPF0(_nr) (S5PC1XX_GPIO_F0_START + (_nr)) +#define S5PC1XX_GPF1(_nr) (S5PC1XX_GPIO_F1_START + (_nr)) +#define S5PC1XX_GPF2(_nr) (S5PC1XX_GPIO_F2_START + (_nr)) +#define S5PC1XX_GPF3(_nr) (S5PC1XX_GPIO_F3_START + (_nr)) +#define S5PC1XX_GPG0(_nr) (S5PC1XX_GPIO_G0_START + (_nr)) +#define S5PC1XX_GPG1(_nr) (S5PC1XX_GPIO_G1_START + (_nr)) +#define S5PC1XX_GPG2(_nr) (S5PC1XX_GPIO_G2_START + (_nr)) +#define S5PC1XX_GPG3(_nr) (S5PC1XX_GPIO_G3_START + (_nr)) +#define S5PC1XX_GPH0(_nr) (S5PC1XX_GPIO_H0_START + (_nr)) +#define S5PC1XX_GPH1(_nr) (S5PC1XX_GPIO_H1_START + (_nr)) +#define S5PC1XX_GPH2(_nr) (S5PC1XX_GPIO_H2_START + (_nr)) +#define S5PC1XX_GPH3(_nr) (S5PC1XX_GPIO_H3_START + (_nr)) +#define S5PC1XX_GPI(_nr) (S5PC1XX_GPIO_I_START + (_nr)) +#define S5PC1XX_GPJ0(_nr) (S5PC1XX_GPIO_J0_START + (_nr)) +#define S5PC1XX_GPJ1(_nr) (S5PC1XX_GPIO_J1_START + (_nr)) +#define S5PC1XX_GPJ2(_nr) (S5PC1XX_GPIO_J2_START + (_nr)) +#define S5PC1XX_GPJ3(_nr) (S5PC1XX_GPIO_J3_START + (_nr)) +#define S5PC1XX_GPJ4(_nr) (S5PC1XX_GPIO_J4_START + (_nr)) +#define S5PC1XX_GPK0(_nr) (S5PC1XX_GPIO_K0_START + (_nr)) +#define S5PC1XX_GPK1(_nr) (S5PC1XX_GPIO_K1_START + (_nr)) +#define S5PC1XX_GPK2(_nr) (S5PC1XX_GPIO_K2_START + (_nr)) +#define S5PC1XX_GPK3(_nr) (S5PC1XX_GPIO_K3_START + (_nr)) +#define S5PC1XX_MP00(_nr) (S5PC1XX_GPIO_MP00_START + (_nr)) +#define S5PC1XX_MP01(_nr) (S5PC1XX_GPIO_MP01_START + (_nr)) +#define S5PC1XX_MP02(_nr) (S5PC1XX_GPIO_MP02_START + (_nr)) +#define S5PC1XX_MP03(_nr) (S5PC1XX_GPIO_MP03_START + (_nr)) +#define S5PC1XX_MP04(_nr) (S5PC1XX_GPIO_MP04_START + (_nr)) + +/* the end of the S5PC1XX specific gpios */ +#define S5PC1XX_GPIO_END (S5PC1XX_MP04(S5PC1XX_GPIO_MP04_NR) + 1) +#define S3C_GPIO_END S5PC1XX_GPIO_END + +/* define the number of gpios we need to the one after the MP04() range */ +#define ARCH_NR_GPIOS (S5PC1XX_MP04(S5PC1XX_GPIO_MP04_NR) + 1) + +#include diff --git a/arch/arm/plat-s5pc1xx/setup-i2c0.c b/arch/arm/plat-s5pc1xx/setup-i2c0.c new file mode 100644 index 00000000000..3d00c025fff --- /dev/null +++ b/arch/arm/plat-s5pc1xx/setup-i2c0.c @@ -0,0 +1,25 @@ +/* linux/arch/arm/plat-s5pc1xx/setup-i2c0.c + * + * Copyright 2009 Samsung Electronics Co. + * Byungho Min + * + * Base S5PC1XX I2C bus 0 gpio configuration + * + * Based on plat-s3c64xx/setup-i2c0.c + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#include +#include + +struct platform_device; /* don't need the contents */ + +#include + +void s3c_i2c0_cfg_gpio(struct platform_device *dev) +{ + /* Pin configuration would be needed */ +} diff --git a/arch/arm/plat-s5pc1xx/setup-i2c1.c b/arch/arm/plat-s5pc1xx/setup-i2c1.c new file mode 100644 index 00000000000..c8f3ca42f51 --- /dev/null +++ b/arch/arm/plat-s5pc1xx/setup-i2c1.c @@ -0,0 +1,25 @@ +/* linux/arch/arm/plat-s3c64xx/setup-i2c1.c + * + * Copyright 2009 Samsung Electronics Co. + * Byungho Min + * + * Base S5PC1XX I2C bus 1 gpio configuration + * + * Based on plat-s3c64xx/setup-i2c1.c + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#include +#include + +struct platform_device; /* don't need the contents */ + +#include + +void s3c_i2c1_cfg_gpio(struct platform_device *dev) +{ + /* Pin configuration would be needed */ +} -- cgit v1.2.3 From c9b870e7e796eea515a261a314917317ebb1cb4a Mon Sep 17 00:00:00 2001 From: Byungho Min Date: Tue, 23 Jun 2009 21:40:03 +0900 Subject: ARM: S5PC100: IRQ and timer S5PC100 has 3 VICs(Vectored Interrupt Controller). The VICs come from S3C64xx series, so the driver source code can be shared with S3C families. The S5PC100 has 3 VICs while S3C64xx has only 2. Signed-off-by: Byungho Min [ben-linux@fluff.org: subject fixup] Signed-off-by: Ben Dooks --- arch/arm/mach-s5pc100/include/mach/irqs.h | 14 ++ arch/arm/mach-s5pc100/include/mach/pwm-clock.h | 56 ++++++ arch/arm/mach-s5pc100/include/mach/regs-irq.h | 24 +++ arch/arm/mach-s5pc100/include/mach/tick.h | 29 +++ arch/arm/plat-s5pc1xx/include/plat/irqs.h | 182 +++++++++++++++++ arch/arm/plat-s5pc1xx/irq.c | 259 +++++++++++++++++++++++++ 6 files changed, 564 insertions(+) create mode 100644 arch/arm/mach-s5pc100/include/mach/irqs.h create mode 100644 arch/arm/mach-s5pc100/include/mach/pwm-clock.h create mode 100644 arch/arm/mach-s5pc100/include/mach/regs-irq.h create mode 100644 arch/arm/mach-s5pc100/include/mach/tick.h create mode 100644 arch/arm/plat-s5pc1xx/include/plat/irqs.h create mode 100644 arch/arm/plat-s5pc1xx/irq.c diff --git a/arch/arm/mach-s5pc100/include/mach/irqs.h b/arch/arm/mach-s5pc100/include/mach/irqs.h new file mode 100644 index 00000000000..622720dba28 --- /dev/null +++ b/arch/arm/mach-s5pc100/include/mach/irqs.h @@ -0,0 +1,14 @@ +/* linux/arch/arm/mach-s5pc100/include/mach/irqs.h + * + * Copyright 2009 Samsung Electronics Co. + * Byungho Min + * + * S5PC100 - IRQ definitions + */ + +#ifndef __ASM_ARCH_IRQS_H +#define __ASM_ARCH_IRQS_H __FILE__ + +#include + +#endif /* __ASM_ARCH_IRQ_H */ diff --git a/arch/arm/mach-s5pc100/include/mach/pwm-clock.h b/arch/arm/mach-s5pc100/include/mach/pwm-clock.h new file mode 100644 index 00000000000..b34d2f7aae5 --- /dev/null +++ b/arch/arm/mach-s5pc100/include/mach/pwm-clock.h @@ -0,0 +1,56 @@ +/* linux/arch/arm/mach-s5pc100/include/mach/pwm-clock.h + * + * Copyright 2009 Samsung Electronics Co. + * Byungho Min + * + * S5PC100 - pwm clock and timer support + * + * Based on mach-s3c6400/include/mach/pwm-clock.h + */ + +/** + * pwm_cfg_src_is_tclk() - return whether the given mux config is a tclk + * @tcfg: The timer TCFG1 register bits shifted down to 0. + * + * Return true if the given configuration from TCFG1 is a TCLK instead + * any of the TDIV clocks. + */ +static inline int pwm_cfg_src_is_tclk(unsigned long tcfg) +{ + return tcfg >= S3C64XX_TCFG1_MUX_TCLK; +} + +/** + * tcfg_to_divisor() - convert tcfg1 setting to a divisor + * @tcfg1: The tcfg1 setting, shifted down. + * + * Get the divisor value for the given tcfg1 setting. We assume the + * caller has already checked to see if this is not a TCLK source. + */ +static inline unsigned long tcfg_to_divisor(unsigned long tcfg1) +{ + return 1 << tcfg1; +} + +/** + * pwm_tdiv_has_div1() - does the tdiv setting have a /1 + * + * Return true if we have a /1 in the tdiv setting. + */ +static inline unsigned int pwm_tdiv_has_div1(void) +{ + return 1; +} + +/** + * pwm_tdiv_div_bits() - calculate TCFG1 divisor value. + * @div: The divisor to calculate the bit information for. + * + * Turn a divisor into the necessary bit field for TCFG1. + */ +static inline unsigned long pwm_tdiv_div_bits(unsigned int div) +{ + return ilog2(div); +} + +#define S3C_TCFG1_MUX_TCLK S3C64XX_TCFG1_MUX_TCLK diff --git a/arch/arm/mach-s5pc100/include/mach/regs-irq.h b/arch/arm/mach-s5pc100/include/mach/regs-irq.h new file mode 100644 index 00000000000..751ac15438c --- /dev/null +++ b/arch/arm/mach-s5pc100/include/mach/regs-irq.h @@ -0,0 +1,24 @@ +/* linux/arch/arm/mach-s5pc100/include/mach/regs-irq.h + * + * Copyright 2009 Samsung Electronics Co. + * Byungho Min + * + * S5PC1XX - IRQ register definitions + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#ifndef __ASM_ARCH_REGS_IRQ_H +#define __ASM_ARCH_REGS_IRQ_H __FILE__ + +#include +#include + +/* interrupt controller */ +#define S5PC1XX_VIC0REG(x) ((x) + S5PC1XX_VA_VIC(0)) +#define S5PC1XX_VIC1REG(x) ((x) + S5PC1XX_VA_VIC(1)) +#define S5PC1XX_VIC2REG(x) ((x) + S5PC1XX_VA_VIC(2)) + +#endif /* __ASM_ARCH_REGS_IRQ_H */ diff --git a/arch/arm/mach-s5pc100/include/mach/tick.h b/arch/arm/mach-s5pc100/include/mach/tick.h new file mode 100644 index 00000000000..d3de0f3591a --- /dev/null +++ b/arch/arm/mach-s5pc100/include/mach/tick.h @@ -0,0 +1,29 @@ +/* linux/arch/arm/mach-s5pc100/include/mach/tick.h + * + * Copyright 2009 Samsung Electronics Co. + * Byungho Min + * + * S3C64XX - Timer tick support definitions + * + * Based on mach-s3c6400/include/mach/tick.h + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#ifndef __ASM_ARCH_TICK_H +#define __ASM_ARCH_TICK_H __FILE__ + +/* note, the timer interrutps turn up in 2 places, the vic and then + * the timer block. We take the VIC as the base at the moment. + */ +static inline u32 s3c24xx_ostimer_pending(void) +{ + u32 pend = __raw_readl(S3C_VA_VIC0 + VIC_RAW_STATUS); + return pend & 1 << (IRQ_TIMER4 - S5PC1XX_IRQ_VIC0(0)); +} + +#define TICK_MAX (0xffffffff) + +#endif /* __ASM_ARCH_TICK_H */ diff --git a/arch/arm/plat-s5pc1xx/include/plat/irqs.h b/arch/arm/plat-s5pc1xx/include/plat/irqs.h new file mode 100644 index 00000000000..f07d8c3b25d --- /dev/null +++ b/arch/arm/plat-s5pc1xx/include/plat/irqs.h @@ -0,0 +1,182 @@ +/* linux/arch/arm/plat-s5pc1xx/include/plat/irqs.h + * + * Copyright 2009 Samsung Electronics Co. + * Byungho Min + * + * S5PC1XX - Common IRQ support + * + * Based on plat-s3c64xx/include/plat/irqs.h + */ + +#ifndef __ASM_PLAT_S5PC1XX_IRQS_H +#define __ASM_PLAT_S5PC1XX_IRQS_H __FILE__ + +/* we keep the first set of CPU IRQs out of the range of + * the ISA space, so that the PC104 has them to itself + * and we don't end up having to do horrible things to the + * standard ISA drivers.... + * + * note, since we're using the VICs, our start must be a + * mulitple of 32 to allow the common code to work + */ + +#define S3C_IRQ_OFFSET (32) + +#define S3C_IRQ(x) ((x) + S3C_IRQ_OFFSET) + +#define S3C_VIC0_BASE S3C_IRQ(0) +#define S3C_VIC1_BASE S3C_IRQ(32) +#define S3C_VIC2_BASE S3C_IRQ(64) + +/* UART interrupts, each UART has 4 intterupts per channel so + * use the space between the ISA and S3C main interrupts. Note, these + * are not in the same order as the S3C24XX series! */ + +#define IRQ_S3CUART_BASE0 (16) +#define IRQ_S3CUART_BASE1 (20) +#define IRQ_S3CUART_BASE2 (24) +#define IRQ_S3CUART_BASE3 (28) + +#define UART_IRQ_RXD (0) +#define UART_IRQ_ERR (1) +#define UART_IRQ_TXD (2) +#define UART_IRQ_MODEM (3) + +#define IRQ_S3CUART_RX0 (IRQ_S3CUART_BASE0 + UART_IRQ_RXD) +#define IRQ_S3CUART_TX0 (IRQ_S3CUART_BASE0 + UART_IRQ_TXD) +#define IRQ_S3CUART_ERR0 (IRQ_S3CUART_BASE0 + UART_IRQ_ERR) + +#define IRQ_S3CUART_RX1 (IRQ_S3CUART_BASE1 + UART_IRQ_RXD) +#define IRQ_S3CUART_TX1 (IRQ_S3CUART_BASE1 + UART_IRQ_TXD) +#define IRQ_S3CUART_ERR1 (IRQ_S3CUART_BASE1 + UART_IRQ_ERR) + +#define IRQ_S3CUART_RX2 (IRQ_S3CUART_BASE2 + UART_IRQ_RXD) +#define IRQ_S3CUART_TX2 (IRQ_S3CUART_BASE2 + UART_IRQ_TXD) +#define IRQ_S3CUART_ERR2 (IRQ_S3CUART_BASE2 + UART_IRQ_ERR) + +#define IRQ_S3CUART_RX3 (IRQ_S3CUART_BASE3 + UART_IRQ_RXD) +#define IRQ_S3CUART_TX3 (IRQ_S3CUART_BASE3 + UART_IRQ_TXD) +#define IRQ_S3CUART_ERR3 (IRQ_S3CUART_BASE3 + UART_IRQ_ERR) + +/* VIC based IRQs */ + +#define S5PC1XX_IRQ_VIC0(x) (S3C_VIC0_BASE + (x)) +#define S5PC1XX_IRQ_VIC1(x) (S3C_VIC1_BASE + (x)) +#define S5PC1XX_IRQ_VIC2(x) (S3C_VIC2_BASE + (x)) + +/* + * VIC0: system, DMA, timer + */ +#define IRQ_EINT0 S5PC1XX_IRQ_VIC0(0) +#define IRQ_EINT1 S5PC1XX_IRQ_VIC0(1) +#define IRQ_EINT2 S5PC1XX_IRQ_VIC0(2) +#define IRQ_EINT3 S5PC1XX_IRQ_VIC0(3) +#define IRQ_EINT4 S5PC1XX_IRQ_VIC0(4) +#define IRQ_EINT5 S5PC1XX_IRQ_VIC0(5) +#define IRQ_EINT6 S5PC1XX_IRQ_VIC0(6) +#define IRQ_EINT7 S5PC1XX_IRQ_VIC0(7) +#define IRQ_EINT8 S5PC1XX_IRQ_VIC0(8) +#define IRQ_EINT9 S5PC1XX_IRQ_VIC0(9) +#define IRQ_EINT10 S5PC1XX_IRQ_VIC0(10) +#define IRQ_EINT11 S5PC1XX_IRQ_VIC0(11) +#define IRQ_EINT12 S5PC1XX_IRQ_VIC0(12) +#define IRQ_EINT13 S5PC1XX_IRQ_VIC0(13) +#define IRQ_EINT14 S5PC1XX_IRQ_VIC0(14) +#define IRQ_EINT15 S5PC1XX_IRQ_VIC0(15) +#define IRQ_EINT16_31 S5PC1XX_IRQ_VIC0(16) +#define IRQ_BATF S5PC1XX_IRQ_VIC0(17) +#define IRQ_MDMA S5PC1XX_IRQ_VIC0(18) +#define IRQ_PDMA0 S5PC1XX_IRQ_VIC0(19) +#define IRQ_PDMA1 S5PC1XX_IRQ_VIC0(20) +#define IRQ_TIMER0 S5PC1XX_IRQ_VIC0(21) +#define IRQ_TIMER1 S5PC1XX_IRQ_VIC0(22) +#define IRQ_TIMER2 S5PC1XX_IRQ_VIC0(23) +#define IRQ_TIMER3 S5PC1XX_IRQ_VIC0(24) +#define IRQ_TIMER4 S5PC1XX_IRQ_VIC0(25) +#define IRQ_SYSTIMER S5PC1XX_IRQ_VIC0(26) +#define IRQ_WDT S5PC1XX_IRQ_VIC0(27) +#define IRQ_RTC_ALARM S5PC1XX_IRQ_VIC0(28) +#define IRQ_RTC_TIC S5PC1XX_IRQ_VIC0(29) +#define IRQ_GPIOINT S5PC1XX_IRQ_VIC0(30) + +/* + * VIC1: ARM, power, memory, connectivity + */ +#define IRQ_CORTEX0 S5PC1XX_IRQ_VIC1(0) +#define IRQ_CORTEX1 S5PC1XX_IRQ_VIC1(1) +#define IRQ_CORTEX2 S5PC1XX_IRQ_VIC1(2) +#define IRQ_CORTEX3 S5PC1XX_IRQ_VIC1(3) +#define IRQ_CORTEX4 S5PC1XX_IRQ_VIC1(4) +#define IRQ_IEMAPC S5PC1XX_IRQ_VIC1(5) +#define IRQ_IEMIEC S5PC1XX_IRQ_VIC1(6) +#define IRQ_ONENAND S5PC1XX_IRQ_VIC1(7) +#define IRQ_NFC S5PC1XX_IRQ_VIC1(8) +#define IRQ_CFC S5PC1XX_IRQ_VIC1(9) +#define IRQ_UART0 S5PC1XX_IRQ_VIC1(10) +#define IRQ_UART1 S5PC1XX_IRQ_VIC1(11) +#define IRQ_UART2 S5PC1XX_IRQ_VIC1(12) +#define IRQ_UART3 S5PC1XX_IRQ_VIC1(13) +#define IRQ_IIC S5PC1XX_IRQ_VIC1(14) +#define IRQ_SPI0 S5PC1XX_IRQ_VIC1(15) +#define IRQ_SPI1 S5PC1XX_IRQ_VIC1(16) +#define IRQ_SPI2 S5PC1XX_IRQ_VIC1(17) +#define IRQ_IRDA S5PC1XX_IRQ_VIC1(18) +#define IRQ_CAN0 S5PC1XX_IRQ_VIC1(19) +#define IRQ_CAN1 S5PC1XX_IRQ_VIC1(20) +#define IRQ_HSIRX S5PC1XX_IRQ_VIC1(21) +#define IRQ_HSITX S5PC1XX_IRQ_VIC1(22) +#define IRQ_UHOST S5PC1XX_IRQ_VIC1(23) +#define IRQ_OTG S5PC1XX_IRQ_VIC1(24) +#define IRQ_MSM S5PC1XX_IRQ_VIC1(25) +#define IRQ_HSMMC0 S5PC1XX_IRQ_VIC1(26) +#define IRQ_HSMMC1 S5PC1XX_IRQ_VIC1(27) +#define IRQ_HSMMC2 S5PC1XX_IRQ_VIC1(28) +#define IRQ_MIPICSI S5PC1XX_IRQ_VIC1(29) +#define IRQ_MIPIDSI S5PC1XX_IRQ_VIC1(30) + +/* + * VIC2: multimedia, audio, security + */ +#define IRQ_LCD0 S5PC1XX_IRQ_VIC2(0) +#define IRQ_LCD1 S5PC1XX_IRQ_VIC2(1) +#define IRQ_LCD2 S5PC1XX_IRQ_VIC2(2) +#define IRQ_LCD3 S5PC1XX_IRQ_VIC2(3) +#define IRQ_ROTATOR S5PC1XX_IRQ_VIC2(4) +#define IRQ_FIMC0 S5PC1XX_IRQ_VIC2(5) +#define IRQ_FIMC1 S5PC1XX_IRQ_VIC2(6) +#define IRQ_FIMC2 S5PC1XX_IRQ_VIC2(7) +#define IRQ_JPEG S5PC1XX_IRQ_VIC2(8) +#define IRQ_2D S5PC1XX_IRQ_VIC2(9) +#define IRQ_3D S5PC1XX_IRQ_VIC2(10) +#define IRQ_MIXER S5PC1XX_IRQ_VIC2(11) +#define IRQ_HDMI S5PC1XX_IRQ_VIC2(12) +#define IRQ_IIC1 S5PC1XX_IRQ_VIC2(13) +#define IRQ_MFC S5PC1XX_IRQ_VIC2(14) +#define IRQ_TVENC S5PC1XX_IRQ_VIC2(15) +#define IRQ_I2S0 S5PC1XX_IRQ_VIC2(16) +#define IRQ_I2S1 S5PC1XX_IRQ_VIC2(17) +#define IRQ_I2S2 S5PC1XX_IRQ_VIC2(18) +#define IRQ_AC97 S5PC1XX_IRQ_VIC2(19) +#define IRQ_PCM0 S5PC1XX_IRQ_VIC2(20) +#define IRQ_PCM1 S5PC1XX_IRQ_VIC2(21) +#define IRQ_SPDIF S5PC1XX_IRQ_VIC2(22) +#define IRQ_ADC S5PC1XX_IRQ_VIC2(23) +#define IRQ_PENDN S5PC1XX_IRQ_VIC2(24) +#define IRQ_TC IRQ_PENDN +#define IRQ_KEYPAD S5PC1XX_IRQ_VIC2(25) +#define IRQ_CG S5PC1XX_IRQ_VIC2(26) +#define IRQ_SEC S5PC1XX_IRQ_VIC2(27) +#define IRQ_SECRX S5PC1XX_IRQ_VIC2(28) +#define IRQ_SECTX S5PC1XX_IRQ_VIC2(29) +#define IRQ_SDMIRQ S5PC1XX_IRQ_VIC2(30) +#define IRQ_SDMFIQ S5PC1XX_IRQ_VIC2(31) + +#define S3C_IRQ_EINT_BASE (IRQ_SDMFIQ + 1) + +#define S3C_EINT(x) ((x) + S3C_IRQ_EINT_BASE) +#define IRQ_EINT(x) S3C_EINT(x) + +#define NR_IRQS (IRQ_EINT(31)+1) + +#endif /* __ASM_PLAT_S5PC1XX_IRQS_H */ + diff --git a/arch/arm/plat-s5pc1xx/irq.c b/arch/arm/plat-s5pc1xx/irq.c new file mode 100644 index 00000000000..80d6dd942cb --- /dev/null +++ b/arch/arm/plat-s5pc1xx/irq.c @@ -0,0 +1,259 @@ +/* arch/arm/plat-s5pc1xx/irq.c + * + * Copyright 2009 Samsung Electronics Co. + * Byungho Min + * + * S5PC1XX - Interrupt handling + * + * Based on plat-s3c64xx/irq.c + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include +#include +#include +#include + +#include + +#include +#include +#include + +/* Timer interrupt handling */ + +static void s3c_irq_demux_timer(unsigned int base_irq, unsigned int sub_irq) +{ + generic_handle_irq(sub_irq); +} + +static void s3c_irq_demux_timer0(unsigned int irq, struct irq_desc *desc) +{ + s3c_irq_demux_timer(irq, IRQ_TIMER0); +} + +static void s3c_irq_demux_timer1(unsigned int irq, struct irq_desc *desc) +{ + s3c_irq_demux_timer(irq, IRQ_TIMER1); +} + +static void s3c_irq_demux_timer2(unsigned int irq, struct irq_desc *desc) +{ + s3c_irq_demux_timer(irq, IRQ_TIMER2); +} + +static void s3c_irq_demux_timer3(unsigned int irq, struct irq_desc *desc) +{ + s3c_irq_demux_timer(irq, IRQ_TIMER3); +} + +static void s3c_irq_demux_timer4(unsigned int irq, struct irq_desc *desc) +{ + s3c_irq_demux_timer(irq, IRQ_TIMER4); +} + +/* We assume the IRQ_TIMER0..IRQ_TIMER4 range is continuous. */ + +static void s3c_irq_timer_mask(unsigned int irq) +{ + u32 reg = __raw_readl(S3C64XX_TINT_CSTAT); + + reg &= 0x1f; /* mask out pending interrupts */ + reg &= ~(1 << (irq - IRQ_TIMER0)); + __raw_writel(reg, S3C64XX_TINT_CSTAT); +} + +static void s3c_irq_timer_unmask(unsigned int irq) +{ + u32 reg = __raw_readl(S3C64XX_TINT_CSTAT); + + reg &= 0x1f; /* mask out pending interrupts */ + reg |= 1 << (irq - IRQ_TIMER0); + __raw_writel(reg, S3C64XX_TINT_CSTAT); +} + +static void s3c_irq_timer_ack(unsigned int irq) +{ + u32 reg = __raw_readl(S3C64XX_TINT_CSTAT); + + reg &= 0x1f; + reg |= (1 << 5) << (irq - IRQ_TIMER0); + __raw_writel(reg, S3C64XX_TINT_CSTAT); +} + +static struct irq_chip s3c_irq_timer = { + .name = "s3c-timer", + .mask = s3c_irq_timer_mask, + .unmask = s3c_irq_timer_unmask, + .ack = s3c_irq_timer_ack, +}; + +struct uart_irq { + void __iomem *regs; + unsigned int base_irq; + unsigned int parent_irq; +}; + +/* Note, we make use of the fact that the parent IRQs, IRQ_UART[0..3] + * are consecutive when looking up the interrupt in the demux routines. + */ +static struct uart_irq uart_irqs[] = { + [0] = { + .regs = (void *)S3C_VA_UART0, + .base_irq = IRQ_S3CUART_BASE0, + .parent_irq = IRQ_UART0, + }, + [1] = { + .regs = (void *)S3C_VA_UART1, + .base_irq = IRQ_S3CUART_BASE1, + .parent_irq = IRQ_UART1, + }, + [2] = { + .regs = (void *)S3C_VA_UART2, + .base_irq = IRQ_S3CUART_BASE2, + .parent_irq = IRQ_UART2, + }, + [3] = { + .regs = (void *)S3C_VA_UART3, + .base_irq = IRQ_S3CUART_BASE3, + .parent_irq = IRQ_UART3, + }, +}; + +static inline void __iomem *s3c_irq_uart_base(unsigned int irq) +{ + struct uart_irq *uirq = get_irq_chip_data(irq); + return uirq->regs; +} + +static inline unsigned int s3c_irq_uart_bit(unsigned int irq) +{ + return irq & 3; +} + +/* UART interrupt registers, not worth adding to seperate include header */ +#define S3C64XX_UINTP 0x30 +#define S3C64XX_UINTSP 0x34 +#define S3C64XX_UINTM 0x38 + +static void s3c_irq_uart_mask(unsigned int irq) +{ + void __iomem *regs = s3c_irq_uart_base(irq); + unsigned int bit = s3c_irq_uart_bit(irq); + u32 reg; + + reg = __raw_readl(regs + S3C64XX_UINTM); + reg |= (1 << bit); + __raw_writel(reg, regs + S3C64XX_UINTM); +} + +static void s3c_irq_uart_maskack(unsigned int irq) +{ + void __iomem *regs = s3c_irq_uart_base(irq); + unsigned int bit = s3c_irq_uart_bit(irq); + u32 reg; + + reg = __raw_readl(regs + S3C64XX_UINTM); + reg |= (1 << bit); + __raw_writel(reg, regs + S3C64XX_UINTM); + __raw_writel(1 << bit, regs + S3C64XX_UINTP); +} + +static void s3c_irq_uart_unmask(unsigned int irq) +{ + void __iomem *regs = s3c_irq_uart_base(irq); + unsigned int bit = s3c_irq_uart_bit(irq); + u32 reg; + + reg = __raw_readl(regs + S3C64XX_UINTM); + reg &= ~(1 << bit); + __raw_writel(reg, regs + S3C64XX_UINTM); +} + +static void s3c_irq_uart_ack(unsigned int irq) +{ + void __iomem *regs = s3c_irq_uart_base(irq); + unsigned int bit = s3c_irq_uart_bit(irq); + + __raw_writel(1 << bit, regs + S3C64XX_UINTP); +} + +static void s3c_irq_demux_uart(unsigned int irq, struct irq_desc *desc) +{ + struct uart_irq *uirq = &uart_irqs[irq - IRQ_UART0]; + u32 pend = __raw_readl(uirq->regs + S3C64XX_UINTP); + int base = uirq->base_irq; + + if (pend & (1 << 0)) + generic_handle_irq(base); + if (pend & (1 << 1)) + generic_handle_irq(base + 1); + if (pend & (1 << 2)) + generic_handle_irq(base + 2); + if (pend & (1 << 3)) + generic_handle_irq(base + 3); +} + +static struct irq_chip s3c_irq_uart = { + .name = "s3c-uart", + .mask = s3c_irq_uart_mask, + .unmask = s3c_irq_uart_unmask, + .mask_ack = s3c_irq_uart_maskack, + .ack = s3c_irq_uart_ack, +}; + +static void __init s5pc1xx_uart_irq(struct uart_irq *uirq) +{ + void __iomem *reg_base = uirq->regs; + unsigned int irq; + int offs; + + /* mask all interrupts at the start. */ + __raw_writel(0xf, reg_base + S3C64XX_UINTM); + + for (offs = 0; offs < 3; offs++) { + irq = uirq->base_irq + offs; + + set_irq_chip(irq, &s3c_irq_uart); + set_irq_chip_data(irq, uirq); + set_irq_handler(irq, handle_level_irq); + set_irq_flags(irq, IRQF_VALID); + } + + set_irq_chained_handler(uirq->parent_irq, s3c_irq_demux_uart); +} + +void __init s5pc1xx_init_irq(u32 *vic_valid, int num) +{ + int i; + int uart, irq; + + printk(KERN_DEBUG "%s: initialising interrupts\n", __func__); + + /* initialise the pair of VICs */ + for (i = 0; i < num; i++) + vic_init((void *)S5PC1XX_VA_VIC(i), S3C_IRQ(i * S3C_IRQ_OFFSET), + vic_valid[i], 0); + + /* add the timer sub-irqs */ + + set_irq_chained_handler(IRQ_TIMER0, s3c_irq_demux_timer0); + set_irq_chained_handler(IRQ_TIMER1, s3c_irq_demux_timer1); + set_irq_chained_handler(IRQ_TIMER2, s3c_irq_demux_timer2); + set_irq_chained_handler(IRQ_TIMER3, s3c_irq_demux_timer3); + set_irq_chained_handler(IRQ_TIMER4, s3c_irq_demux_timer4); + + for (irq = IRQ_TIMER0; irq <= IRQ_TIMER4; irq++) { + set_irq_chip(irq, &s3c_irq_timer); + set_irq_handler(irq, handle_level_irq); + set_irq_flags(irq, IRQF_VALID); + } + + for (uart = 0; uart < ARRAY_SIZE(uart_irqs); uart++) + s5pc1xx_uart_irq(&uart_irqs[uart]); +} + + -- cgit v1.2.3 From c1cc3db8e9fcf1c9d2db3f34552c73996d3d8a13 Mon Sep 17 00:00:00 2001 From: Byungho Min Date: Tue, 23 Jun 2009 21:39:56 +0900 Subject: ARM: S5PC100: Clock and PLL support S5PC100 has 4 PLLs (APLL,MPLL,EPLL,HPLL) and 3 clock domains. Clock scheme is implemented here. Signed-off-by: Byungho Min [ben-linux@fluff.org: edited title] Signed-off-by: Ben Dooks --- arch/arm/plat-s5pc1xx/include/plat/pll.h | 38 + arch/arm/plat-s5pc1xx/include/plat/regs-clock.h | 421 +++++++++ arch/arm/plat-s5pc1xx/s5pc100-clock.c | 1139 +++++++++++++++++++++++ 3 files changed, 1598 insertions(+) create mode 100644 arch/arm/plat-s5pc1xx/include/plat/pll.h create mode 100644 arch/arm/plat-s5pc1xx/include/plat/regs-clock.h create mode 100644 arch/arm/plat-s5pc1xx/s5pc100-clock.c diff --git a/arch/arm/plat-s5pc1xx/include/plat/pll.h b/arch/arm/plat-s5pc1xx/include/plat/pll.h new file mode 100644 index 00000000000..21afef1573e --- /dev/null +++ b/arch/arm/plat-s5pc1xx/include/plat/pll.h @@ -0,0 +1,38 @@ +/* arch/arm/plat-s5pc1xx/include/plat/pll.h + * + * Copyright 2009 Samsung Electronics Co. + * Byungho Min + * + * S5PC1XX PLL code + * + * Based on plat-s3c64xx/include/plat/pll.h + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#define S5P_PLL_MDIV_MASK ((1 << (25-16+1)) - 1) +#define S5P_PLL_PDIV_MASK ((1 << (13-8+1)) - 1) +#define S5P_PLL_SDIV_MASK ((1 << (2-0+1)) - 1) +#define S5P_PLL_MDIV_SHIFT (16) +#define S5P_PLL_PDIV_SHIFT (8) +#define S5P_PLL_SDIV_SHIFT (0) + +#include + +static inline unsigned long s5pc1xx_get_pll(unsigned long baseclk, + u32 pllcon) +{ + u32 mdiv, pdiv, sdiv; + u64 fvco = baseclk; + + mdiv = (pllcon >> S5P_PLL_MDIV_SHIFT) & S5P_PLL_MDIV_MASK; + pdiv = (pllcon >> S5P_PLL_PDIV_SHIFT) & S5P_PLL_PDIV_MASK; + sdiv = (pllcon >> S5P_PLL_SDIV_SHIFT) & S5P_PLL_SDIV_MASK; + + fvco *= mdiv; + do_div(fvco, (pdiv << sdiv)); + + return (unsigned long)fvco; +} diff --git a/arch/arm/plat-s5pc1xx/include/plat/regs-clock.h b/arch/arm/plat-s5pc1xx/include/plat/regs-clock.h new file mode 100644 index 00000000000..75c8390cb82 --- /dev/null +++ b/arch/arm/plat-s5pc1xx/include/plat/regs-clock.h @@ -0,0 +1,421 @@ +/* arch/arm/plat-s5pc1xx/include/plat/regs-clock.h + * + * Copyright 2009 Samsung Electronics Co. + * Byungho Min + * + * S5PC1XX clock register definitions + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#ifndef __PLAT_REGS_CLOCK_H +#define __PLAT_REGS_CLOCK_H __FILE__ + +#define S5PC1XX_CLKREG(x) (S5PC1XX_VA_CLK + (x)) + +#define S5PC1XX_APLL_LOCK S5PC1XX_CLKREG(0x00) +#define S5PC1XX_MPLL_LOCK S5PC1XX_CLKREG(0x04) +#define S5PC1XX_EPLL_LOCK S5PC1XX_CLKREG(0x08) +#define S5PC100_HPLL_LOCK S5PC1XX_CLKREG(0x0C) + +#define S5PC1XX_APLL_CON S5PC1XX_CLKREG(0x100) +#define S5PC1XX_MPLL_CON S5PC1XX_CLKREG(0x104) +#define S5PC1XX_EPLL_CON S5PC1XX_CLKREG(0x108) +#define S5PC100_HPLL_CON S5PC1XX_CLKREG(0x10C) + +#define S5PC1XX_CLK_SRC0 S5PC1XX_CLKREG(0x200) +#define S5PC1XX_CLK_SRC1 S5PC1XX_CLKREG(0x204) +#define S5PC1XX_CLK_SRC2 S5PC1XX_CLKREG(0x208) +#define S5PC1XX_CLK_SRC3 S5PC1XX_CLKREG(0x20C) + +#define S5PC1XX_CLK_DIV0 S5PC1XX_CLKREG(0x300) +#define S5PC1XX_CLK_DIV1 S5PC1XX_CLKREG(0x304) +#define S5PC1XX_CLK_DIV2 S5PC1XX_CLKREG(0x308) +#define S5PC1XX_CLK_DIV3 S5PC1XX_CLKREG(0x30C) +#define S5PC1XX_CLK_DIV4 S5PC1XX_CLKREG(0x310) + +#define S5PC100_CLK_OUT S5PC1XX_CLKREG(0x400) + +#define S5PC100_CLKGATE_D00 S5PC1XX_CLKREG(0x500) +#define S5PC100_CLKGATE_D01 S5PC1XX_CLKREG(0x504) +#define S5PC100_CLKGATE_D02 S5PC1XX_CLKREG(0x508) + +#define S5PC100_CLKGATE_D10 S5PC1XX_CLKREG(0x520) +#define S5PC100_CLKGATE_D11 S5PC1XX_CLKREG(0x524) +#define S5PC100_CLKGATE_D12 S5PC1XX_CLKREG(0x528) +#define S5PC100_CLKGATE_D13 S5PC1XX_CLKREG(0x52C) +#define S5PC100_CLKGATE_D14 S5PC1XX_CLKREG(0x530) +#define S5PC100_CLKGATE_D15 S5PC1XX_CLKREG(0x534) + +#define S5PC100_CLKGATE_D20 S5PC1XX_CLKREG(0x540) + +#define S5PC100_SCLKGATE0 S5PC1XX_CLKREG(0x560) +#define S5PC100_SCLKGATE1 S5PC1XX_CLKREG(0x564) + +#define S5PC100_OTHERS S5PC1XX_CLKREG(0x8200) + +#define S5PC1XX_EPLL_EN (1<<31) +#define S5PC1XX_EPLL_MASK 0xffffffff +#define S5PC1XX_EPLLVAL(_m, _p, _s) ((_m) << 16 | ((_p) << 8) | ((_s))) + +/* CLKSRC0 */ +#define S5PC1XX_CLKSRC0_APLL_MASK (0x1<<0) +#define S5PC1XX_CLKSRC0_APLL_SHIFT (0) +#define S5PC1XX_CLKSRC0_MPLL_MASK (0x1<<4) +#define S5PC1XX_CLKSRC0_MPLL_SHIFT (4) +#define S5PC1XX_CLKSRC0_EPLL_MASK (0x1<<8) +#define S5PC1XX_CLKSRC0_EPLL_SHIFT (8) +#define S5PC100_CLKSRC0_HPLL_MASK (0x1<<12) +#define S5PC100_CLKSRC0_HPLL_SHIFT (12) +#define S5PC100_CLKSRC0_AMMUX_MASK (0x1<<16) +#define S5PC100_CLKSRC0_AMMUX_SHIFT (16) +#define S5PC100_CLKSRC0_HREF_MASK (0x1<<20) +#define S5PC100_CLKSRC0_HREF_SHIFT (20) +#define S5PC1XX_CLKSRC0_ONENAND_MASK (0x1<<24) +#define S5PC1XX_CLKSRC0_ONENAND_SHIFT (24) + + +/* CLKSRC1 */ +#define S5PC100_CLKSRC1_UART_MASK (0x1<<0) +#define S5PC100_CLKSRC1_UART_SHIFT (0) +#define S5PC100_CLKSRC1_SPI0_MASK (0x3<<4) +#define S5PC100_CLKSRC1_SPI0_SHIFT (4) +#define S5PC100_CLKSRC1_SPI1_MASK (0x3<<8) +#define S5PC100_CLKSRC1_SPI1_SHIFT (8) +#define S5PC100_CLKSRC1_SPI2_MASK (0x3<<12) +#define S5PC100_CLKSRC1_SPI2_SHIFT (12) +#define S5PC100_CLKSRC1_IRDA_MASK (0x3<<16) +#define S5PC100_CLKSRC1_IRDA_SHIFT (16) +#define S5PC100_CLKSRC1_UHOST_MASK (0x3<<20) +#define S5PC100_CLKSRC1_UHOST_SHIFT (20) +#define S5PC100_CLKSRC1_CLK48M_MASK (0x1<<24) +#define S5PC100_CLKSRC1_CLK48M_SHIFT (24) + +/* CLKSRC2 */ +#define S5PC100_CLKSRC2_MMC0_MASK (0x3<<0) +#define S5PC100_CLKSRC2_MMC0_SHIFT (0) +#define S5PC100_CLKSRC2_MMC1_MASK (0x3<<4) +#define S5PC100_CLKSRC2_MMC1_SHIFT (4) +#define S5PC100_CLKSRC2_MMC2_MASK (0x3<<8) +#define S5PC100_CLKSRC2_MMC2_SHIFT (8) +#define S5PC100_CLKSRC2_LCD_MASK (0x3<<12) +#define S5PC100_CLKSRC2_LCD_SHIFT (12) +#define S5PC100_CLKSRC2_FIMC0_MASK (0x3<<16) +#define S5PC100_CLKSRC2_FIMC0_SHIFT (16) +#define S5PC100_CLKSRC2_FIMC1_MASK (0x3<<20) +#define S5PC100_CLKSRC2_FIMC1_SHIFT (20) +#define S5PC100_CLKSRC2_FIMC2_MASK (0x3<<24) +#define S5PC100_CLKSRC2_FIMC2_SHIFT (24) +#define S5PC100_CLKSRC2_MIXER_MASK (0x3<<28) +#define S5PC100_CLKSRC2_MIXER_SHIFT (28) + +/* CLKSRC3 */ +#define S5PC100_CLKSRC3_PWI_MASK (0x3<<0) +#define S5PC100_CLKSRC3_PWI_SHIFT (0) +#define S5PC100_CLKSRC3_HCLKD2_MASK (0x1<<4) +#define S5PC100_CLKSRC3_HCLKD2_SHIFT (4) +#define S5PC100_CLKSRC3_I2SD2_MASK (0x3<<8) +#define S5PC100_CLKSRC3_I2SD2_SHIFT (8) +#define S5PC100_CLKSRC3_AUDIO0_MASK (0x7<<12) +#define S5PC100_CLKSRC3_AUDIO0_SHIFT (12) +#define S5PC100_CLKSRC3_AUDIO1_MASK (0x7<<16) +#define S5PC100_CLKSRC3_AUDIO1_SHIFT (16) +#define S5PC100_CLKSRC3_AUDIO2_MASK (0x7<<20) +#define S5PC100_CLKSRC3_AUDIO2_SHIFT (20) +#define S5PC100_CLKSRC3_SPDIF_MASK (0x3<<24) +#define S5PC100_CLKSRC3_SPDIF_SHIFT (24) + + +/* CLKDIV0 */ +#define S5PC1XX_CLKDIV0_APLL_MASK (0x1<<0) +#define S5PC1XX_CLKDIV0_APLL_SHIFT (0) +#define S5PC100_CLKDIV0_ARM_MASK (0x7<<4) +#define S5PC100_CLKDIV0_ARM_SHIFT (4) +#define S5PC100_CLKDIV0_D0_MASK (0x7<<8) +#define S5PC100_CLKDIV0_D0_SHIFT (8) +#define S5PC100_CLKDIV0_PCLKD0_MASK (0x7<<12) +#define S5PC100_CLKDIV0_PCLKD0_SHIFT (12) +#define S5PC100_CLKDIV0_SECSS_MASK (0x7<<16) +#define S5PC100_CLKDIV0_SECSS_SHIFT (16) + +/* CLKDIV1 */ +#define S5PC100_CLKDIV1_AM_MASK (0x7<<0) +#define S5PC100_CLKDIV1_AM_SHIFT (0) +#define S5PC100_CLKDIV1_MPLL_MASK (0x3<<4) +#define S5PC100_CLKDIV1_MPLL_SHIFT (4) +#define S5PC100_CLKDIV1_MPLL2_MASK (0x1<<8) +#define S5PC100_CLKDIV1_MPLL2_SHIFT (8) +#define S5PC100_CLKDIV1_D1_MASK (0x7<<12) +#define S5PC100_CLKDIV1_D1_SHIFT (12) +#define S5PC100_CLKDIV1_PCLKD1_MASK (0x7<<16) +#define S5PC100_CLKDIV1_PCLKD1_SHIFT (16) +#define S5PC100_CLKDIV1_ONENAND_MASK (0x3<<20) +#define S5PC100_CLKDIV1_ONENAND_SHIFT (20) +#define S5PC100_CLKDIV1_CAM_MASK (0x1F<<24) +#define S5PC100_CLKDIV1_CAM_SHIFT (24) + +/* CLKDIV2 */ +#define S5PC100_CLKDIV2_UART_MASK (0x7<<0) +#define S5PC100_CLKDIV2_UART_SHIFT (0) +#define S5PC100_CLKDIV2_SPI0_MASK (0xf<<4) +#define S5PC100_CLKDIV2_SPI0_SHIFT (4) +#define S5PC100_CLKDIV2_SPI1_MASK (0xf<<8) +#define S5PC100_CLKDIV2_SPI1_SHIFT (8) +#define S5PC100_CLKDIV2_SPI2_MASK (0xf<<12) +#define S5PC100_CLKDIV2_SPI2_SHIFT (12) +#define S5PC100_CLKDIV2_IRDA_MASK (0xf<<16) +#define S5PC100_CLKDIV2_IRDA_SHIFT (16) +#define S5PC100_CLKDIV2_UHOST_MASK (0xf<<20) +#define S5PC100_CLKDIV2_UHOST_SHIFT (20) + +/* CLKDIV3 */ +#define S5PC100_CLKDIV3_MMC0_MASK (0xf<<0) +#define S5PC100_CLKDIV3_MMC0_SHIFT (0) +#define S5PC100_CLKDIV3_MMC1_MASK (0xf<<4) +#define S5PC100_CLKDIV3_MMC1_SHIFT (4) +#define S5PC100_CLKDIV3_MMC2_MASK (0xf<<8) +#define S5PC100_CLKDIV3_MMC2_SHIFT (8) +#define S5PC100_CLKDIV3_LCD_MASK (0xf<<12) +#define S5PC100_CLKDIV3_LCD_SHIFT (12) +#define S5PC100_CLKDIV3_FIMC0_MASK (0xf<<16) +#define S5PC100_CLKDIV3_FIMC0_SHIFT (16) +#define S5PC100_CLKDIV3_FIMC1_MASK (0xf<<20) +#define S5PC100_CLKDIV3_FIMC1_SHIFT (20) +#define S5PC100_CLKDIV3_FIMC2_MASK (0xf<<24) +#define S5PC100_CLKDIV3_FIMC2_SHIFT (24) +#define S5PC100_CLKDIV3_HDMI_MASK (0xf<<28) +#define S5PC100_CLKDIV3_HDMI_SHIFT (28) + +/* CLKDIV4 */ +#define S5PC100_CLKDIV4_PWI_MASK (0x7<<0) +#define S5PC100_CLKDIV4_PWI_SHIFT (0) +#define S5PC100_CLKDIV4_HCLKD2_MASK (0x7<<4) +#define S5PC100_CLKDIV4_HCLKD2_SHIFT (4) +#define S5PC100_CLKDIV4_I2SD2_MASK (0xf<<8) +#define S5PC100_CLKDIV4_I2SD2_SHIFT (8) +#define S5PC100_CLKDIV4_AUDIO0_MASK (0xf<<12) +#define S5PC100_CLKDIV4_AUDIO0_SHIFT (12) +#define S5PC100_CLKDIV4_AUDIO1_MASK (0xf<<16) +#define S5PC100_CLKDIV4_AUDIO1_SHIFT (16) +#define S5PC100_CLKDIV4_AUDIO2_MASK (0xf<<20) +#define S5PC100_CLKDIV4_AUDIO2_SHIFT (20) + + +/* HCLKD0/PCLKD0 Clock Gate 0 Registers */ +#define S5PC100_CLKGATE_D00_INTC (1<<0) +#define S5PC100_CLKGATE_D00_TZIC (1<<1) +#define S5PC100_CLKGATE_D00_CFCON (1<<2) +#define S5PC100_CLKGATE_D00_MDMA (1<<3) +#define S5PC100_CLKGATE_D00_G2D (1<<4) +#define S5PC100_CLKGATE_D00_SECSS (1<<5) +#define S5PC100_CLKGATE_D00_CSSYS (1<<6) + +/* HCLKD0/PCLKD0 Clock Gate 1 Registers */ +#define S5PC100_CLKGATE_D01_DMC (1<<0) +#define S5PC100_CLKGATE_D01_SROMC (1<<1) +#define S5PC100_CLKGATE_D01_ONENAND (1<<2) +#define S5PC100_CLKGATE_D01_NFCON (1<<3) +#define S5PC100_CLKGATE_D01_INTMEM (1<<4) +#define S5PC100_CLKGATE_D01_EBI (1<<5) + +/* PCLKD0 Clock Gate 2 Registers */ +#define S5PC100_CLKGATE_D02_SECKEY (1<<1) +#define S5PC100_CLKGATE_D02_SDM (1<<2) + +/* HCLKD1/PCLKD1 Clock Gate 0 Registers */ +#define S5PC100_CLKGATE_D10_PDMA0 (1<<0) +#define S5PC100_CLKGATE_D10_PDMA1 (1<<1) +#define S5PC100_CLKGATE_D10_USBHOST (1<<2) +#define S5PC100_CLKGATE_D10_USBOTG (1<<3) +#define S5PC100_CLKGATE_D10_MODEMIF (1<<4) +#define S5PC100_CLKGATE_D10_HSMMC0 (1<<5) +#define S5PC100_CLKGATE_D10_HSMMC1 (1<<6) +#define S5PC100_CLKGATE_D10_HSMMC2 (1<<7) + +/* HCLKD1/PCLKD1 Clock Gate 1 Registers */ +#define S5PC100_CLKGATE_D11_LCD (1<<0) +#define S5PC100_CLKGATE_D11_ROTATOR (1<<1) +#define S5PC100_CLKGATE_D11_FIMC0 (1<<2) +#define S5PC100_CLKGATE_D11_FIMC1 (1<<3) +#define S5PC100_CLKGATE_D11_FIMC2 (1<<4) +#define S5PC100_CLKGATE_D11_JPEG (1<<5) +#define S5PC100_CLKGATE_D11_DSI (1<<6) +#define S5PC100_CLKGATE_D11_CSI (1<<7) +#define S5PC100_CLKGATE_D11_G3D (1<<8) + +/* HCLKD1/PCLKD1 Clock Gate 2 Registers */ +#define S5PC100_CLKGATE_D12_TV (1<<0) +#define S5PC100_CLKGATE_D12_VP (1<<1) +#define S5PC100_CLKGATE_D12_MIXER (1<<2) +#define S5PC100_CLKGATE_D12_HDMI (1<<3) +#define S5PC100_CLKGATE_D12_MFC (1<<4) + +/* HCLKD1/PCLKD1 Clock Gate 3 Registers */ +#define S5PC100_CLKGATE_D13_CHIPID (1<<0) +#define S5PC100_CLKGATE_D13_GPIO (1<<1) +#define S5PC100_CLKGATE_D13_APC (1<<2) +#define S5PC100_CLKGATE_D13_IEC (1<<3) +#define S5PC100_CLKGATE_D13_PWM (1<<6) +#define S5PC100_CLKGATE_D13_SYSTIMER (1<<7) +#define S5PC100_CLKGATE_D13_WDT (1<<8) +#define S5PC100_CLKGATE_D13_RTC (1<<9) + +/* HCLKD1/PCLKD1 Clock Gate 4 Registers */ +#define S5PC100_CLKGATE_D14_UART0 (1<<0) +#define S5PC100_CLKGATE_D14_UART1 (1<<1) +#define S5PC100_CLKGATE_D14_UART2 (1<<2) +#define S5PC100_CLKGATE_D14_UART3 (1<<3) +#define S5PC100_CLKGATE_D14_IIC (1<<4) +#define S5PC100_CLKGATE_D14_HDMI_IIC (1<<5) +#define S5PC100_CLKGATE_D14_SPI0 (1<<6) +#define S5PC100_CLKGATE_D14_SPI1 (1<<7) +#define S5PC100_CLKGATE_D14_SPI2 (1<<8) +#define S5PC100_CLKGATE_D14_IRDA (1<<9) +#define S5PC100_CLKGATE_D14_CCAN0 (1<<10) +#define S5PC100_CLKGATE_D14_CCAN1 (1<<11) +#define S5PC100_CLKGATE_D14_HSITX (1<<12) +#define S5PC100_CLKGATE_D14_HSIRX (1<<13) + +/* HCLKD1/PCLKD1 Clock Gate 5 Registers */ +#define S5PC100_CLKGATE_D15_IIS0 (1<<0) +#define S5PC100_CLKGATE_D15_IIS1 (1<<1) +#define S5PC100_CLKGATE_D15_IIS2 (1<<2) +#define S5PC100_CLKGATE_D15_AC97 (1<<3) +#define S5PC100_CLKGATE_D15_PCM0 (1<<4) +#define S5PC100_CLKGATE_D15_PCM1 (1<<5) +#define S5PC100_CLKGATE_D15_SPDIF (1<<6) +#define S5PC100_CLKGATE_D15_TSADC (1<<7) +#define S5PC100_CLKGATE_D15_KEYIF (1<<8) +#define S5PC100_CLKGATE_D15_CG (1<<9) + +/* HCLKD2 Clock Gate 0 Registers */ +#define S5PC100_CLKGATE_D20_HCLKD2 (1<<0) +#define S5PC100_CLKGATE_D20_I2SD2 (1<<1) + +/* Special Clock Gate 0 Registers */ +#define S5PC1XX_CLKGATE_SCLK0_HPM (1<<0) +#define S5PC1XX_CLKGATE_SCLK0_PWI (1<<1) +#define S5PC100_CLKGATE_SCLK0_ONENAND (1<<2) +#define S5PC100_CLKGATE_SCLK0_UART (1<<3) +#define S5PC100_CLKGATE_SCLK0_SPI0 (1<<4) +#define S5PC100_CLKGATE_SCLK0_SPI1 (1<<5) +#define S5PC100_CLKGATE_SCLK0_SPI2 (1<<6) +#define S5PC100_CLKGATE_SCLK0_SPI0_48 (1<<7) +#define S5PC100_CLKGATE_SCLK0_SPI1_48 (1<<8) +#define S5PC100_CLKGATE_SCLK0_SPI2_48 (1<<9) +#define S5PC100_CLKGATE_SCLK0_IRDA (1<<10) +#define S5PC100_CLKGATE_SCLK0_USBHOST (1<<11) +#define S5PC100_CLKGATE_SCLK0_MMC0 (1<<12) +#define S5PC100_CLKGATE_SCLK0_MMC1 (1<<13) +#define S5PC100_CLKGATE_SCLK0_MMC2 (1<<14) +#define S5PC100_CLKGATE_SCLK0_MMC0_48 (1<<15) +#define S5PC100_CLKGATE_SCLK0_MMC1_48 (1<<16) +#define S5PC100_CLKGATE_SCLK0_MMC2_48 (1<<17) + +/* Special Clock Gate 1 Registers */ +#define S5PC100_CLKGATE_SCLK1_LCD (1<<0) +#define S5PC100_CLKGATE_SCLK1_FIMC0 (1<<1) +#define S5PC100_CLKGATE_SCLK1_FIMC1 (1<<2) +#define S5PC100_CLKGATE_SCLK1_FIMC2 (1<<3) +#define S5PC100_CLKGATE_SCLK1_TV54 (1<<4) +#define S5PC100_CLKGATE_SCLK1_VDAC54 (1<<5) +#define S5PC100_CLKGATE_SCLK1_MIXER (1<<6) +#define S5PC100_CLKGATE_SCLK1_HDMI (1<<7) +#define S5PC100_CLKGATE_SCLK1_AUDIO0 (1<<8) +#define S5PC100_CLKGATE_SCLK1_AUDIO1 (1<<9) +#define S5PC100_CLKGATE_SCLK1_AUDIO2 (1<<10) +#define S5PC100_CLKGATE_SCLK1_SPDIF (1<<11) +#define S5PC100_CLKGATE_SCLK1_CAM (1<<12) + +/* register for power management */ +#define S5PC100_PWR_CFG S5PC1XX_CLKREG(0x8000) +#define S5PC100_EINT_WAKEUP_MASK S5PC1XX_CLKREG(0x8004) +#define S5PC100_NORMAL_CFG S5PC1XX_CLKREG(0x8010) +#define S5PC100_STOP_CFG S5PC1XX_CLKREG(0x8014) +#define S5PC100_SLEEP_CFG S5PC1XX_CLKREG(0x8018) +#define S5PC100_STOP_MEM_CFG S5PC1XX_CLKREG(0x801C) +#define S5PC100_OSC_FREQ S5PC1XX_CLKREG(0x8100) +#define S5PC100_OSC_STABLE S5PC1XX_CLKREG(0x8104) +#define S5PC100_PWR_STABLE S5PC1XX_CLKREG(0x8108) +#define S5PC100_MTC_STABLE S5PC1XX_CLKREG(0x8110) +#define S5PC100_CLAMP_STABLE S5PC1XX_CLKREG(0x8114) +#define S5PC100_OTHERS S5PC1XX_CLKREG(0x8200) +#define S5PC100_RST_STAT S5PC1XX_CLKREG(0x8300) +#define S5PC100_WAKEUP_STAT S5PC1XX_CLKREG(0x8304) +#define S5PC100_BLK_PWR_STAT S5PC1XX_CLKREG(0x8308) +#define S5PC100_INFORM0 S5PC1XX_CLKREG(0x8400) +#define S5PC100_INFORM1 S5PC1XX_CLKREG(0x8404) +#define S5PC100_INFORM2 S5PC1XX_CLKREG(0x8408) +#define S5PC100_INFORM3 S5PC1XX_CLKREG(0x840C) +#define S5PC100_INFORM4 S5PC1XX_CLKREG(0x8410) +#define S5PC100_INFORM5 S5PC1XX_CLKREG(0x8414) +#define S5PC100_INFORM6 S5PC1XX_CLKREG(0x8418) +#define S5PC100_INFORM7 S5PC1XX_CLKREG(0x841C) +#define S5PC100_DCGIDX_MAP0 S5PC1XX_CLKREG(0x8500) +#define S5PC100_DCGIDX_MAP1 S5PC1XX_CLKREG(0x8504) +#define S5PC100_DCGIDX_MAP2 S5PC1XX_CLKREG(0x8508) +#define S5PC100_DCGPERF_MAP0 S5PC1XX_CLKREG(0x850C) +#define S5PC100_DCGPERF_MAP1 S5PC1XX_CLKREG(0x8510) +#define S5PC100_DVCIDX_MAP S5PC1XX_CLKREG(0x8514) +#define S5PC100_FREQ_CPU S5PC1XX_CLKREG(0x8518) +#define S5PC100_FREQ_DPM S5PC1XX_CLKREG(0x851C) +#define S5PC100_DVSEMCLK_EN S5PC1XX_CLKREG(0x8520) +#define S5PC100_APLL_CON_L8 S5PC1XX_CLKREG(0x8600) +#define S5PC100_APLL_CON_L7 S5PC1XX_CLKREG(0x8604) +#define S5PC100_APLL_CON_L6 S5PC1XX_CLKREG(0x8608) +#define S5PC100_APLL_CON_L5 S5PC1XX_CLKREG(0x860C) +#define S5PC100_APLL_CON_L4 S5PC1XX_CLKREG(0x8610) +#define S5PC100_APLL_CON_L3 S5PC1XX_CLKREG(0x8614) +#define S5PC100_APLL_CON_L2 S5PC1XX_CLKREG(0x8618) +#define S5PC100_APLL_CON_L1 S5PC1XX_CLKREG(0x861C) +#define S5PC100_IEM_CONTROL S5PC1XX_CLKREG(0x8620) +#define S5PC100_CLKDIV_IEM_L8 S5PC1XX_CLKREG(0x8700) +#define S5PC100_CLKDIV_IEM_L7 S5PC1XX_CLKREG(0x8704) +#define S5PC100_CLKDIV_IEM_L6 S5PC1XX_CLKREG(0x8708) +#define S5PC100_CLKDIV_IEM_L5 S5PC1XX_CLKREG(0x870C) +#define S5PC100_CLKDIV_IEM_L4 S5PC1XX_CLKREG(0x8710) +#define S5PC100_CLKDIV_IEM_L3 S5PC1XX_CLKREG(0x8714) +#define S5PC100_CLKDIV_IEM_L2 S5PC1XX_CLKREG(0x8718) +#define S5PC100_CLKDIV_IEM_L1 S5PC1XX_CLKREG(0x871C) +#define S5PC100_IEM_HPMCLK_DIV S5PC1XX_CLKREG(0x8724) + +#define S5PC100_SWRESET S5PC1XX_CLKREG(0x100000) +#define S5PC100_OND_SWRESET S5PC1XX_CLKREG(0x100008) +#define S5PC100_GEN_CTRL S5PC1XX_CLKREG(0x100100) +#define S5PC100_GEN_STATUS S5PC1XX_CLKREG(0x100104) +#define S5PC100_MEM_SYS_CFG S5PC1XX_CLKREG(0x100200) +#define S5PC100_CAM_MUX_SEL S5PC1XX_CLKREG(0x100300) +#define S5PC100_MIXER_OUT_SEL S5PC1XX_CLKREG(0x100304) +#define S5PC100_LPMP_MODE_SEL S5PC1XX_CLKREG(0x100308) +#define S5PC100_MIPI_PHY_CON0 S5PC1XX_CLKREG(0x100400) +#define S5PC100_MIPI_PHY_CON1 S5PC1XX_CLKREG(0x100414) +#define S5PC100_HDMI_PHY_CON0 S5PC1XX_CLKREG(0x100420) + +#define S5PC100_CFG_WFI_CLEAN (~(3<<5)) +#define S5PC100_CFG_WFI_IDLE (1<<5) +#define S5PC100_CFG_WFI_STOP (2<<5) +#define S5PC100_CFG_WFI_SLEEP (3<<5) + +#define S5PC100_OTHER_SYS_INT 24 +#define S5PC100_OTHER_STA_TYPE 23 +#define STA_TYPE_EXPON 0 +#define STA_TYPE_SFR 1 + +#define S5PC100_PWR_STA_EXP_SCALE 0 +#define S5PC100_PWR_STA_CNT 4 + +#define S5PC100_PWR_STABLE_COUNT 85500 + +#define S5PC100_SLEEP_CFG_OSC_EN 0 + +/* OTHERS Resgister */ +#define S5PC100_OTHERS_USB_SIG_MASK (1 << 16) +#define S5PC100_OTHERS_MIPI_DPHY_EN (1 << 28) + +/* MIPI D-PHY Control Register 0 */ +#define S5PC100_MIPI_PHY_CON0_M_RESETN (1 << 1) +#define S5PC100_MIPI_PHY_CON0_S_RESETN (1 << 0) + +#endif /* _PLAT_REGS_CLOCK_H */ diff --git a/arch/arm/plat-s5pc1xx/s5pc100-clock.c b/arch/arm/plat-s5pc1xx/s5pc100-clock.c new file mode 100644 index 00000000000..6b24035172f --- /dev/null +++ b/arch/arm/plat-s5pc1xx/s5pc100-clock.c @@ -0,0 +1,1139 @@ +/* linux/arch/arm/plat-s5pc1xx/s5pc100-clock.c + * + * Copyright 2009 Samsung Electronics, Co. + * Byungho Min + * + * S5PC100 based common clock support + * + * Based on plat-s3c64xx/s3c6400-clock.c + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include + +#include + +#include +#include +#include +#include +#include +#include + +/* fin_apll, fin_mpll and fin_epll are all the same clock, which we call + * ext_xtal_mux for want of an actual name from the manual. +*/ + +static struct clk clk_ext_xtal_mux = { + .name = "ext_xtal", + .id = -1, +}; + +#define clk_fin_apll clk_ext_xtal_mux +#define clk_fin_mpll clk_ext_xtal_mux +#define clk_fin_epll clk_ext_xtal_mux +#define clk_fin_hpll clk_ext_xtal_mux + +#define clk_fout_mpll clk_mpll + +struct clk_sources { + unsigned int nr_sources; + struct clk **sources; +}; + +struct clksrc_clk { + struct clk clk; + unsigned int mask; + unsigned int shift; + + struct clk_sources *sources; + + unsigned int divider_shift; + void __iomem *reg_divider; + void __iomem *reg_source; +}; + +static int clk_default_setrate(struct clk *clk, unsigned long rate) +{ + clk->rate = rate; + return 1; +} + +struct clk clk_27m = { + .name = "clk_27m", + .id = -1, + .rate = 27000000, +}; + +static int clk_48m_ctrl(struct clk *clk, int enable) +{ + unsigned long flags; + u32 val; + + /* can't rely on clock lock, this register has other usages */ + local_irq_save(flags); + + val = __raw_readl(S5PC1XX_CLK_SRC1); + if (enable) + val |= S5PC100_CLKSRC1_CLK48M_MASK; + else + val &= ~S5PC100_CLKSRC1_CLK48M_MASK; + + __raw_writel(val, S5PC1XX_CLK_SRC1); + local_irq_restore(flags); + + return 0; +} + +struct clk clk_48m = { + .name = "clk_48m", + .id = -1, + .rate = 48000000, + .enable = clk_48m_ctrl, +}; + +struct clk clk_54m = { + .name = "clk_54m", + .id = -1, + .rate = 54000000, +}; + +struct clk clk_hpll = { + .name = "hpll", + .id = -1, +}; + +struct clk clk_hd0 = { + .name = "hclkd0", + .id = -1, + .rate = 0, + .parent = NULL, + .ctrlbit = 0, + .set_rate = clk_default_setrate, +}; + +struct clk clk_pd0 = { + .name = "pclkd0", + .id = -1, + .rate = 0, + .parent = NULL, + .ctrlbit = 0, + .set_rate = clk_default_setrate, +}; + +static int s5pc1xx_clk_gate(void __iomem *reg, + struct clk *clk, + int enable) +{ + unsigned int ctrlbit = clk->ctrlbit; + u32 con; + + con = __raw_readl(reg); + + if (enable) + con |= ctrlbit; + else + con &= ~ctrlbit; + + __raw_writel(con, reg); + return 0; +} + +static int s5pc1xx_clk_d00_ctrl(struct clk *clk, int enable) +{ + return s5pc1xx_clk_gate(S5PC100_CLKGATE_D00, clk, enable); +} + +static int s5pc1xx_clk_d01_ctrl(struct clk *clk, int enable) +{ + return s5pc1xx_clk_gate(S5PC100_CLKGATE_D01, clk, enable); +} + +static int s5pc1xx_clk_d02_ctrl(struct clk *clk, int enable) +{ + return s5pc1xx_clk_gate(S5PC100_CLKGATE_D02, clk, enable); +} + +static int s5pc1xx_clk_d10_ctrl(struct clk *clk, int enable) +{ + return s5pc1xx_clk_gate(S5PC100_CLKGATE_D10, clk, enable); +} + +static int s5pc1xx_clk_d11_ctrl(struct clk *clk, int enable) +{ + return s5pc1xx_clk_gate(S5PC100_CLKGATE_D11, clk, enable); +} + +static int s5pc1xx_clk_d12_ctrl(struct clk *clk, int enable) +{ + return s5pc1xx_clk_gate(S5PC100_CLKGATE_D12, clk, enable); +} + +static int s5pc1xx_clk_d13_ctrl(struct clk *clk, int enable) +{ + return s5pc1xx_clk_gate(S5PC100_CLKGATE_D13, clk, enable); +} + +static int s5pc1xx_clk_d14_ctrl(struct clk *clk, int enable) +{ + return s5pc1xx_clk_gate(S5PC100_CLKGATE_D14, clk, enable); +} + +static int s5pc1xx_clk_d15_ctrl(struct clk *clk, int enable) +{ + return s5pc1xx_clk_gate(S5PC100_CLKGATE_D15, clk, enable); +} + +static int s5pc1xx_clk_d20_ctrl(struct clk *clk, int enable) +{ + return s5pc1xx_clk_gate(S5PC100_CLKGATE_D20, clk, enable); +} + +int s5pc1xx_sclk0_ctrl(struct clk *clk, int enable) +{ + return s5pc1xx_clk_gate(S5PC100_SCLKGATE0, clk, enable); +} + +int s5pc1xx_sclk1_ctrl(struct clk *clk, int enable) +{ + return s5pc1xx_clk_gate(S5PC100_SCLKGATE1, clk, enable); +} + +static struct clk init_clocks_disable[] = { + { + .name = "dsi", + .id = -1, + .parent = &clk_p, + .enable = s5pc1xx_clk_d11_ctrl, + .ctrlbit = S5PC100_CLKGATE_D11_DSI, + }, { + .name = "csi", + .id = -1, + .parent = &clk_h, + .enable = s5pc1xx_clk_d11_ctrl, + .ctrlbit = S5PC100_CLKGATE_D11_CSI, + }, { + .name = "ccan0", + .id = 0, + .parent = &clk_p, + .enable = s5pc1xx_clk_d14_ctrl, + .ctrlbit = S5PC100_CLKGATE_D14_CCAN0, + }, { + .name = "ccan1", + .id = 1, + .parent = &clk_p, + .enable = s5pc1xx_clk_d14_ctrl, + .ctrlbit = S5PC100_CLKGATE_D14_CCAN1, + }, { + .name = "keypad", + .id = -1, + .parent = &clk_p, + .enable = s5pc1xx_clk_d15_ctrl, + .ctrlbit = S5PC100_CLKGATE_D15_KEYIF, + }, { + .name = "hclkd2", + .id = -1, + .parent = NULL, + .enable = s5pc1xx_clk_d20_ctrl, + .ctrlbit = S5PC100_CLKGATE_D20_HCLKD2, + }, { + .name = "iis-d2", + .id = -1, + .parent = NULL, + .enable = s5pc1xx_clk_d20_ctrl, + .ctrlbit = S5PC100_CLKGATE_D20_I2SD2, + }, { + .name = "otg", + .id = -1, + .parent = &clk_h, + .enable = s5pc1xx_clk_d10_ctrl, + .ctrlbit = S5PC100_CLKGATE_D10_USBOTG, + }, +}; + +static struct clk init_clocks[] = { + /* System1 (D0_0) devices */ + { + .name = "intc", + .id = -1, + .parent = &clk_hd0, + .enable = s5pc1xx_clk_d00_ctrl, + .ctrlbit = S5PC100_CLKGATE_D00_INTC, + }, { + .name = "tzic", + .id = -1, + .parent = &clk_hd0, + .enable = s5pc1xx_clk_d00_ctrl, + .ctrlbit = S5PC100_CLKGATE_D00_TZIC, + }, { + .name = "cf-ata", + .id = -1, + .parent = &clk_hd0, + .enable = s5pc1xx_clk_d00_ctrl, + .ctrlbit = S5PC100_CLKGATE_D00_CFCON, + }, { + .name = "mdma", + .id = -1, + .parent = &clk_hd0, + .enable = s5pc1xx_clk_d00_ctrl, + .ctrlbit = S5PC100_CLKGATE_D00_MDMA, + }, { + .name = "g2d", + .id = -1, + .parent = &clk_hd0, + .enable = s5pc1xx_clk_d00_ctrl, + .ctrlbit = S5PC100_CLKGATE_D00_G2D, + }, { + .name = "secss", + .id = -1, + .parent = &clk_hd0, + .enable = s5pc1xx_clk_d00_ctrl, + .ctrlbit = S5PC100_CLKGATE_D00_SECSS, + }, { + .name = "cssys", + .id = -1, + .parent = &clk_hd0, + .enable = s5pc1xx_clk_d00_ctrl, + .ctrlbit = S5PC100_CLKGATE_D00_CSSYS, + }, + + /* Memory (D0_1) devices */ + { + .name = "dmc", + .id = -1, + .parent = &clk_hd0, + .enable = s5pc1xx_clk_d01_ctrl, + .ctrlbit = S5PC100_CLKGATE_D01_DMC, + }, { + .name = "sromc", + .id = -1, + .parent = &clk_hd0, + .enable = s5pc1xx_clk_d01_ctrl, + .ctrlbit = S5PC100_CLKGATE_D01_SROMC, + }, { + .name = "onenand", + .id = -1, + .parent = &clk_hd0, + .enable = s5pc1xx_clk_d01_ctrl, + .ctrlbit = S5PC100_CLKGATE_D01_ONENAND, + }, { + .name = "nand", + .id = -1, + .parent = &clk_hd0, + .enable = s5pc1xx_clk_d01_ctrl, + .ctrlbit = S5PC100_CLKGATE_D01_NFCON, + }, { + .name = "intmem", + .id = -1, + .parent = &clk_hd0, + .enable = s5pc1xx_clk_d01_ctrl, + .ctrlbit = S5PC100_CLKGATE_D01_INTMEM, + }, { + .name = "ebi", + .id = -1, + .parent = &clk_hd0, + .enable = s5pc1xx_clk_d01_ctrl, + .ctrlbit = S5PC100_CLKGATE_D01_EBI, + }, + + /* System2 (D0_2) devices */ + { + .name = "seckey", + .id = -1, + .parent = &clk_pd0, + .enable = s5pc1xx_clk_d02_ctrl, + .ctrlbit = S5PC100_CLKGATE_D02_SECKEY, + }, { + .name = "sdm", + .id = -1, + .parent = &clk_hd0, + .enable = s5pc1xx_clk_d02_ctrl, + .ctrlbit = S5PC100_CLKGATE_D02_SDM, + }, + + /* File (D1_0) devices */ + { + .name = "pdma0", + .id = -1, + .parent = &clk_h, + .enable = s5pc1xx_clk_d10_ctrl, + .ctrlbit = S5PC100_CLKGATE_D10_PDMA0, + }, { + .name = "pdma1", + .id = -1, + .parent = &clk_h, + .enable = s5pc1xx_clk_d10_ctrl, + .ctrlbit = S5PC100_CLKGATE_D10_PDMA1, + }, { + .name = "usb-host", + .id = -1, + .parent = &clk_h, + .enable = s5pc1xx_clk_d10_ctrl, + .ctrlbit = S5PC100_CLKGATE_D10_USBHOST, + }, { + .name = "modem", + .id = -1, + .parent = &clk_h, + .enable = s5pc1xx_clk_d10_ctrl, + .ctrlbit = S5PC100_CLKGATE_D10_MODEMIF, + }, { + .name = "hsmmc", + .id = 0, + .parent = &clk_h, + .enable = s5pc1xx_clk_d10_ctrl, + .ctrlbit = S5PC100_CLKGATE_D10_HSMMC0, + }, { + .name = "hsmmc", + .id = 1, + .parent = &clk_h, + .enable = s5pc1xx_clk_d10_ctrl, + .ctrlbit = S5PC100_CLKGATE_D10_HSMMC1, + }, { + .name = "hsmmc", + .id = 2, + .parent = &clk_h, + .enable = s5pc1xx_clk_d10_ctrl, + .ctrlbit = S5PC100_CLKGATE_D10_HSMMC2, + }, + + /* Multimedia1 (D1_1) devices */ + { + .name = "lcd", + .id = -1, + .parent = &clk_h, + .enable = s5pc1xx_clk_d11_ctrl, + .ctrlbit = S5PC100_CLKGATE_D11_LCD, + }, { + .name = "rotator", + .id = -1, + .parent = &clk_h, + .enable = s5pc1xx_clk_d11_ctrl, + .ctrlbit = S5PC100_CLKGATE_D11_ROTATOR, + }, { + .name = "fimc", + .id = 0, + .parent = &clk_h, + .enable = s5pc1xx_clk_d11_ctrl, + .ctrlbit = S5PC100_CLKGATE_D11_FIMC0, + }, { + .name = "fimc", + .id = 1, + .parent = &clk_h, + .enable = s5pc1xx_clk_d11_ctrl, + .ctrlbit = S5PC100_CLKGATE_D11_FIMC1, + }, { + .name = "fimc", + .id = 2, + .parent = &clk_h, + .enable = s5pc1xx_clk_d11_ctrl, + .ctrlbit = S5PC100_CLKGATE_D11_FIMC2, + }, { + .name = "jpeg", + .id = -1, + .parent = &clk_h, + .enable = s5pc1xx_clk_d11_ctrl, + .ctrlbit = S5PC100_CLKGATE_D11_JPEG, + }, { + .name = "g3d", + .id = -1, + .parent = &clk_h, + .enable = s5pc1xx_clk_d11_ctrl, + .ctrlbit = S5PC100_CLKGATE_D11_G3D, + }, + + /* Multimedia2 (D1_2) devices */ + { + .name = "tv", + .id = -1, + .parent = &clk_h, + .enable = s5pc1xx_clk_d12_ctrl, + .ctrlbit = S5PC100_CLKGATE_D12_TV, + }, { + .name = "vp", + .id = -1, + .parent = &clk_h, + .enable = s5pc1xx_clk_d12_ctrl, + .ctrlbit = S5PC100_CLKGATE_D12_VP, + }, { + .name = "mixer", + .id = -1, + .parent = &clk_h, + .enable = s5pc1xx_clk_d12_ctrl, + .ctrlbit = S5PC100_CLKGATE_D12_MIXER, + }, { + .name = "hdmi", + .id = -1, + .parent = &clk_h, + .enable = s5pc1xx_clk_d12_ctrl, + .ctrlbit = S5PC100_CLKGATE_D12_HDMI, + }, { + .name = "mfc", + .id = -1, + .parent = &clk_h, + .enable = s5pc1xx_clk_d12_ctrl, + .ctrlbit = S5PC100_CLKGATE_D12_MFC, + }, + + /* System (D1_3) devices */ + { + .name = "chipid", + .id = -1, + .parent = &clk_p, + .enable = s5pc1xx_clk_d13_ctrl, + .ctrlbit = S5PC100_CLKGATE_D13_CHIPID, + }, { + .name = "gpio", + .id = -1, + .parent = &clk_p, + .enable = s5pc1xx_clk_d13_ctrl, + .ctrlbit = S5PC100_CLKGATE_D13_GPIO, + }, { + .name = "apc", + .id = -1, + .parent = &clk_p, + .enable = s5pc1xx_clk_d13_ctrl, + .ctrlbit = S5PC100_CLKGATE_D13_APC, + }, { + .name = "iec", + .id = -1, + .parent = &clk_p, + .enable = s5pc1xx_clk_d13_ctrl, + .ctrlbit = S5PC100_CLKGATE_D13_IEC, + }, { + .name = "timers", + .id = -1, + .parent = &clk_p, + .enable = s5pc1xx_clk_d13_ctrl, + .ctrlbit = S5PC100_CLKGATE_D13_PWM, + }, { + .name = "systimer", + .id = -1, + .parent = &clk_p, + .enable = s5pc1xx_clk_d13_ctrl, + .ctrlbit = S5PC100_CLKGATE_D13_SYSTIMER, + }, { + .name = "watchdog", + .id = -1, + .parent = &clk_p, + .enable = s5pc1xx_clk_d13_ctrl, + .ctrlbit = S5PC100_CLKGATE_D13_WDT, + }, { + .name = "rtc", + .id = -1, + .parent = &clk_p, + .enable = s5pc1xx_clk_d13_ctrl, + .ctrlbit = S5PC100_CLKGATE_D13_RTC, + }, + + /* Connectivity (D1_4) devices */ + { + .name = "uart", + .id = 0, + .parent = &clk_p, + .enable = s5pc1xx_clk_d14_ctrl, + .ctrlbit = S5PC100_CLKGATE_D14_UART0, + }, { + .name = "uart", + .id = 1, + .parent = &clk_p, + .enable = s5pc1xx_clk_d14_ctrl, + .ctrlbit = S5PC100_CLKGATE_D14_UART1, + }, { + .name = "uart", + .id = 2, + .parent = &clk_p, + .enable = s5pc1xx_clk_d14_ctrl, + .ctrlbit = S5PC100_CLKGATE_D14_UART2, + }, { + .name = "uart", + .id = 3, + .parent = &clk_p, + .enable = s5pc1xx_clk_d14_ctrl, + .ctrlbit = S5PC100_CLKGATE_D14_UART3, + }, { + .name = "i2c", + .id = -1, + .parent = &clk_p, + .enable = s5pc1xx_clk_d14_ctrl, + .ctrlbit = S5PC100_CLKGATE_D14_IIC, + }, { + .name = "hdmi-i2c", + .id = -1, + .parent = &clk_p, + .enable = s5pc1xx_clk_d14_ctrl, + .ctrlbit = S5PC100_CLKGATE_D14_HDMI_IIC, + }, { + .name = "spi", + .id = 0, + .parent = &clk_p, + .enable = s5pc1xx_clk_d14_ctrl, + .ctrlbit = S5PC100_CLKGATE_D14_SPI0, + }, { + .name = "spi", + .id = 1, + .parent = &clk_p, + .enable = s5pc1xx_clk_d14_ctrl, + .ctrlbit = S5PC100_CLKGATE_D14_SPI1, + }, { + .name = "spi", + .id = 2, + .parent = &clk_p, + .enable = s5pc1xx_clk_d14_ctrl, + .ctrlbit = S5PC100_CLKGATE_D14_SPI2, + }, { + .name = "irda", + .id = -1, + .parent = &clk_p, + .enable = s5pc1xx_clk_d14_ctrl, + .ctrlbit = S5PC100_CLKGATE_D14_IRDA, + }, { + .name = "hsitx", + .id = -1, + .parent = &clk_p, + .enable = s5pc1xx_clk_d14_ctrl, + .ctrlbit = S5PC100_CLKGATE_D14_HSITX, + }, { + .name = "hsirx", + .id = -1, + .parent = &clk_p, + .enable = s5pc1xx_clk_d14_ctrl, + .ctrlbit = S5PC100_CLKGATE_D14_HSIRX, + }, + + /* Audio (D1_5) devices */ + { + .name = "iis", + .id = 0, + .parent = &clk_p, + .enable = s5pc1xx_clk_d15_ctrl, + .ctrlbit = S5PC100_CLKGATE_D15_IIS0, + }, { + .name = "iis", + .id = 1, + .parent = &clk_p, + .enable = s5pc1xx_clk_d15_ctrl, + .ctrlbit = S5PC100_CLKGATE_D15_IIS1, + }, { + .name = "iis", + .id = 2, + .parent = &clk_p, + .enable = s5pc1xx_clk_d15_ctrl, + .ctrlbit = S5PC100_CLKGATE_D15_IIS2, + }, { + .name = "ac97", + .id = -1, + .parent = &clk_p, + .enable = s5pc1xx_clk_d15_ctrl, + .ctrlbit = S5PC100_CLKGATE_D15_AC97, + }, { + .name = "pcm", + .id = 0, + .parent = &clk_p, + .enable = s5pc1xx_clk_d15_ctrl, + .ctrlbit = S5PC100_CLKGATE_D15_PCM0, + }, { + .name = "pcm", + .id = 1, + .parent = &clk_p, + .enable = s5pc1xx_clk_d15_ctrl, + .ctrlbit = S5PC100_CLKGATE_D15_PCM1, + }, { + .name = "spdif", + .id = -1, + .parent = &clk_p, + .enable = s5pc1xx_clk_d15_ctrl, + .ctrlbit = S5PC100_CLKGATE_D15_SPDIF, + }, { + .name = "adc", + .id = -1, + .parent = &clk_p, + .enable = s5pc1xx_clk_d15_ctrl, + .ctrlbit = S5PC100_CLKGATE_D15_TSADC, + }, { + .name = "keyif", + .id = -1, + .parent = &clk_p, + .enable = s5pc1xx_clk_d15_ctrl, + .ctrlbit = S5PC100_CLKGATE_D15_KEYIF, + }, { + .name = "cg", + .id = -1, + .parent = &clk_p, + .enable = s5pc1xx_clk_d15_ctrl, + .ctrlbit = S5PC100_CLKGATE_D15_CG, + }, + + /* Audio (D2_0) devices: all disabled */ + + /* Special Clocks 1 */ + { + .name = "sclk_hpm", + .id = -1, + .parent = NULL, + .enable = s5pc1xx_sclk0_ctrl, + .ctrlbit = S5PC1XX_CLKGATE_SCLK0_HPM, + }, { + .name = "sclk_onenand", + .id = -1, + .parent = NULL, + .enable = s5pc1xx_sclk0_ctrl, + .ctrlbit = S5PC100_CLKGATE_SCLK0_ONENAND, + }, { + .name = "sclk_spi_48", + .id = 0, + .parent = &clk_48m, + .enable = s5pc1xx_sclk0_ctrl, + .ctrlbit = S5PC100_CLKGATE_SCLK0_SPI0_48, + }, { + .name = "sclk_spi_48", + .id = 1, + .parent = &clk_48m, + .enable = s5pc1xx_sclk0_ctrl, + .ctrlbit = S5PC100_CLKGATE_SCLK0_SPI1_48, + }, { + .name = "sclk_spi_48", + .id = 2, + .parent = &clk_48m, + .enable = s5pc1xx_sclk0_ctrl, + .ctrlbit = S5PC100_CLKGATE_SCLK0_SPI2_48, + }, { + .name = "sclk_mmc_48", + .id = 0, + .parent = &clk_48m, + .enable = s5pc1xx_sclk0_ctrl, + .ctrlbit = S5PC100_CLKGATE_SCLK0_MMC0_48, + }, { + .name = "sclk_mmc_48", + .id = 1, + .parent = &clk_48m, + .enable = s5pc1xx_sclk0_ctrl, + .ctrlbit = S5PC100_CLKGATE_SCLK0_MMC1_48, + }, { + .name = "sclk_mmc_48", + .id = 2, + .parent = &clk_48m, + .enable = s5pc1xx_sclk0_ctrl, + .ctrlbit = S5PC100_CLKGATE_SCLK0_MMC2_48, + }, + + /* Special Clocks 2 */ + { + .name = "sclk_tv_54", + .id = -1, + .parent = &clk_54m, + .enable = s5pc1xx_sclk1_ctrl, + .ctrlbit = S5PC100_CLKGATE_SCLK1_TV54, + }, { + .name = "sclk_vdac_54", + .id = -1, + .parent = &clk_54m, + .enable = s5pc1xx_sclk1_ctrl, + .ctrlbit = S5PC100_CLKGATE_SCLK1_VDAC54, + }, { + .name = "sclk_spdif", + .id = -1, + .parent = NULL, + .enable = s5pc1xx_sclk1_ctrl, + .ctrlbit = S5PC100_CLKGATE_SCLK1_SPDIF, + }, +}; + +void __init s5pc1xx_register_clocks(void) +{ + struct clk *clkp; + int ret; + int ptr; + + clkp = init_clocks; + for (ptr = 0; ptr < ARRAY_SIZE(init_clocks); ptr++, clkp++) { + ret = s3c24xx_register_clock(clkp); + if (ret < 0) { + printk(KERN_ERR "Failed to register clock %s (%d)\n", + clkp->name, ret); + } + } + + clkp = init_clocks_disable; + for (ptr = 0; ptr < ARRAY_SIZE(init_clocks_disable); ptr++, clkp++) { + + ret = s3c24xx_register_clock(clkp); + if (ret < 0) { + printk(KERN_ERR "Failed to register clock %s (%d)\n", + clkp->name, ret); + } + + (clkp->enable)(clkp, 0); + } + + s3c_pwmclk_init(); +} +static struct clk clk_fout_apll = { + .name = "fout_apll", + .id = -1, +}; + +static struct clk *clk_src_apll_list[] = { + [0] = &clk_fin_apll, + [1] = &clk_fout_apll, +}; + +static struct clk_sources clk_src_apll = { + .sources = clk_src_apll_list, + .nr_sources = ARRAY_SIZE(clk_src_apll_list), +}; + +static struct clksrc_clk clk_mout_apll = { + .clk = { + .name = "mout_apll", + .id = -1, + }, + .shift = S5PC1XX_CLKSRC0_APLL_SHIFT, + .mask = S5PC1XX_CLKSRC0_APLL_MASK, + .sources = &clk_src_apll, + .reg_source = S5PC1XX_CLK_SRC0, +}; + +static struct clk clk_fout_epll = { + .name = "fout_epll", + .id = -1, +}; + +static struct clk *clk_src_epll_list[] = { + [0] = &clk_fin_epll, + [1] = &clk_fout_epll, +}; + +static struct clk_sources clk_src_epll = { + .sources = clk_src_epll_list, + .nr_sources = ARRAY_SIZE(clk_src_epll_list), +}; + +static struct clksrc_clk clk_mout_epll = { + .clk = { + .name = "mout_epll", + .id = -1, + }, + .shift = S5PC1XX_CLKSRC0_EPLL_SHIFT, + .mask = S5PC1XX_CLKSRC0_EPLL_MASK, + .sources = &clk_src_epll, + .reg_source = S5PC1XX_CLK_SRC0, +}; + +static struct clk *clk_src_mpll_list[] = { + [0] = &clk_fin_mpll, + [1] = &clk_fout_mpll, +}; + +static struct clk_sources clk_src_mpll = { + .sources = clk_src_mpll_list, + .nr_sources = ARRAY_SIZE(clk_src_mpll_list), +}; + +static struct clksrc_clk clk_mout_mpll = { + .clk = { + .name = "mout_mpll", + .id = -1, + }, + .shift = S5PC1XX_CLKSRC0_MPLL_SHIFT, + .mask = S5PC1XX_CLKSRC0_MPLL_MASK, + .sources = &clk_src_mpll, + .reg_source = S5PC1XX_CLK_SRC0, +}; + +static unsigned long s5pc1xx_clk_doutmpll_get_rate(struct clk *clk) +{ + unsigned long rate = clk_get_rate(clk->parent); + unsigned long clkdiv; + + printk(KERN_DEBUG "%s: parent is %ld\n", __func__, rate); + + clkdiv = __raw_readl(S5PC1XX_CLK_DIV1) & S5PC100_CLKDIV1_MPLL_MASK; + rate /= (clkdiv >> S5PC100_CLKDIV1_MPLL_SHIFT) + 1; + + return rate; +} + +static struct clk clk_dout_mpll = { + .name = "dout_mpll", + .id = -1, + .parent = &clk_mout_mpll.clk, + .get_rate = s5pc1xx_clk_doutmpll_get_rate, +}; + +static unsigned long s5pc1xx_clk_doutmpll2_get_rate(struct clk *clk) +{ + unsigned long rate = clk_get_rate(clk->parent); + unsigned long clkdiv; + + printk(KERN_DEBUG "%s: parent is %ld\n", __func__, rate); + + clkdiv = __raw_readl(S5PC1XX_CLK_DIV1) & S5PC100_CLKDIV1_MPLL2_MASK; + rate /= (clkdiv >> S5PC100_CLKDIV1_MPLL2_SHIFT) + 1; + + return rate; +} + +struct clk clk_dout_mpll2 = { + .name = "dout_mpll2", + .id = -1, + .parent = &clk_mout_mpll.clk, + .get_rate = s5pc1xx_clk_doutmpll2_get_rate, +}; + +static struct clk *clkset_uart_list[] = { + &clk_mout_epll.clk, + &clk_dout_mpll, + NULL, + NULL +}; + +static struct clk_sources clkset_uart = { + .sources = clkset_uart_list, + .nr_sources = ARRAY_SIZE(clkset_uart_list), +}; + +static inline struct clksrc_clk *to_clksrc(struct clk *clk) +{ + return container_of(clk, struct clksrc_clk, clk); +} + +static unsigned long s5pc1xx_getrate_clksrc(struct clk *clk) +{ + struct clksrc_clk *sclk = to_clksrc(clk); + unsigned long rate = clk_get_rate(clk->parent); + u32 clkdiv = __raw_readl(sclk->reg_divider); + + clkdiv >>= sclk->divider_shift; + clkdiv &= 0xf; + clkdiv++; + + rate /= clkdiv; + return rate; +} + +static int s5pc1xx_setrate_clksrc(struct clk *clk, unsigned long rate) +{ + struct clksrc_clk *sclk = to_clksrc(clk); + void __iomem *reg = sclk->reg_divider; + unsigned int div; + u32 val; + + rate = clk_round_rate(clk, rate); + div = clk_get_rate(clk->parent) / rate; + if (div > 16) + return -EINVAL; + + val = __raw_readl(reg); + val &= ~(0xf << sclk->shift); + val |= (div - 1) << sclk->shift; + __raw_writel(val, reg); + + return 0; +} + +static int s5pc1xx_setparent_clksrc(struct clk *clk, struct clk *parent) +{ + struct clksrc_clk *sclk = to_clksrc(clk); + struct clk_sources *srcs = sclk->sources; + u32 clksrc = __raw_readl(sclk->reg_source); + int src_nr = -1; + int ptr; + + for (ptr = 0; ptr < srcs->nr_sources; ptr++) + if (srcs->sources[ptr] == parent) { + src_nr = ptr; + break; + } + + if (src_nr >= 0) { + clksrc &= ~sclk->mask; + clksrc |= src_nr << sclk->shift; + + __raw_writel(clksrc, sclk->reg_source); + return 0; + } + + return -EINVAL; +} + +static unsigned long s5pc1xx_roundrate_clksrc(struct clk *clk, + unsigned long rate) +{ + unsigned long parent_rate = clk_get_rate(clk->parent); + int div; + + if (rate > parent_rate) + rate = parent_rate; + else { + div = rate / parent_rate; + + if (div == 0) + div = 1; + if (div > 16) + div = 16; + + rate = parent_rate / div; + } + + return rate; +} + +static struct clksrc_clk clk_uart_uclk1 = { + .clk = { + .name = "uclk1", + .id = -1, + .ctrlbit = S5PC100_CLKGATE_SCLK0_UART, + .enable = s5pc1xx_sclk0_ctrl, + .set_parent = s5pc1xx_setparent_clksrc, + .get_rate = s5pc1xx_getrate_clksrc, + .set_rate = s5pc1xx_setrate_clksrc, + .round_rate = s5pc1xx_roundrate_clksrc, + }, + .shift = S5PC100_CLKSRC1_UART_SHIFT, + .mask = S5PC100_CLKSRC1_UART_MASK, + .sources = &clkset_uart, + .divider_shift = S5PC100_CLKDIV2_UART_SHIFT, + .reg_divider = S5PC1XX_CLK_DIV2, + .reg_source = S5PC1XX_CLK_SRC1, +}; + +/* Clock initialisation code */ + +static struct clksrc_clk *init_parents[] = { + &clk_mout_apll, + &clk_mout_epll, + &clk_mout_mpll, + &clk_uart_uclk1, +}; + +static void __init_or_cpufreq s5pc1xx_set_clksrc(struct clksrc_clk *clk) +{ + struct clk_sources *srcs = clk->sources; + u32 clksrc = __raw_readl(clk->reg_source); + + clksrc &= clk->mask; + clksrc >>= clk->shift; + + if (clksrc > srcs->nr_sources || !srcs->sources[clksrc]) { + printk(KERN_ERR "%s: bad source %d\n", + clk->clk.name, clksrc); + return; + } + + clk->clk.parent = srcs->sources[clksrc]; + + printk(KERN_INFO "%s: source is %s (%d), rate is %ld\n", + clk->clk.name, clk->clk.parent->name, clksrc, + clk_get_rate(&clk->clk)); +} + +#define GET_DIV(clk, field) ((((clk) & field##_MASK) >> field##_SHIFT) + 1) + +void __init_or_cpufreq s5pc100_setup_clocks(void) +{ + struct clk *xtal_clk; + unsigned long xtal; + unsigned long armclk; + unsigned long hclkd0; + unsigned long hclk; + unsigned long pclkd0; + unsigned long pclk; + unsigned long apll; + unsigned long mpll; + unsigned long hpll; + unsigned long epll; + unsigned int ptr; + u32 clkdiv0, clkdiv1; + + printk(KERN_DEBUG "%s: registering clocks\n", __func__); + + clkdiv0 = __raw_readl(S5PC1XX_CLK_DIV0); + clkdiv1 = __raw_readl(S5PC1XX_CLK_DIV1); + + printk(KERN_DEBUG "%s: clkdiv0 = %08x, clkdiv1 = %08x\n", + __func__, clkdiv0, clkdiv1); + + xtal_clk = clk_get(NULL, "xtal"); + BUG_ON(IS_ERR(xtal_clk)); + + xtal = clk_get_rate(xtal_clk); + clk_put(xtal_clk); + + printk(KERN_DEBUG "%s: xtal is %ld\n", __func__, xtal); + + apll = s5pc1xx_get_pll(xtal, __raw_readl(S5PC1XX_APLL_CON)); + mpll = s5pc1xx_get_pll(xtal, __raw_readl(S5PC1XX_MPLL_CON)); + epll = s5pc1xx_get_pll(xtal, __raw_readl(S5PC1XX_EPLL_CON)); + hpll = s5pc1xx_get_pll(xtal, __raw_readl(S5PC100_HPLL_CON)); + + printk(KERN_INFO "S5PC100: PLL settings, A=%ld, M=%ld, E=%ld, H=%ld\n", + apll, mpll, epll, hpll); + + armclk = apll / GET_DIV(clkdiv0, S5PC1XX_CLKDIV0_APLL); + armclk = armclk / GET_DIV(clkdiv0, S5PC100_CLKDIV0_ARM); + hclkd0 = armclk / GET_DIV(clkdiv0, S5PC100_CLKDIV0_D0); + pclkd0 = hclkd0 / GET_DIV(clkdiv0, S5PC100_CLKDIV0_PCLKD0); + hclk = mpll / GET_DIV(clkdiv1, S5PC100_CLKDIV1_D1); + pclk = hclk / GET_DIV(clkdiv1, S5PC100_CLKDIV1_PCLKD1); + + printk(KERN_INFO "S5PC100: ARMCLK=%ld, HCLKD0=%ld, PCLKD0=%ld, HCLK=%ld, PCLK=%ld\n", + armclk, hclkd0, pclkd0, hclk, pclk); + + clk_fout_apll.rate = apll; + clk_fout_mpll.rate = mpll; + clk_fout_epll.rate = epll; + clk_fout_apll.rate = apll; + + clk_h.rate = hclk; + clk_p.rate = pclk; + + for (ptr = 0; ptr < ARRAY_SIZE(init_parents); ptr++) + s5pc1xx_set_clksrc(init_parents[ptr]); +} + +static struct clk *clks[] __initdata = { + &clk_ext_xtal_mux, + &clk_mout_epll.clk, + &clk_fout_epll, + &clk_mout_mpll.clk, + &clk_dout_mpll, + &clk_uart_uclk1.clk, + &clk_ext, + &clk_epll, + &clk_27m, + &clk_48m, + &clk_54m, +}; + +void __init s5pc100_register_clocks(void) +{ + struct clk *clkp; + int ret; + int ptr; + + for (ptr = 0; ptr < ARRAY_SIZE(clks); ptr++) { + clkp = clks[ptr]; + ret = s3c24xx_register_clock(clkp); + if (ret < 0) { + printk(KERN_ERR "Failed to register clock %s (%d)\n", + clkp->name, ret); + } + } + + clk_mpll.parent = &clk_mout_mpll.clk; + clk_epll.parent = &clk_mout_epll.clk; +} -- cgit v1.2.3 From 5a7652f2032b88106c9ba41edf0fb795397008bd Mon Sep 17 00:00:00 2001 From: Byungho Min Date: Tue, 23 Jun 2009 21:39:42 +0900 Subject: ARM: S5PC100: Kconfigs and Makefiles S5PC100 is a new SoC with ARM coretex-A8 and numerous peripherals. This SoC is successor of S3C64XX. S5PC100 has peripherals which are still similar to S3C families so some drivers in "arch/arm/plat-s3c" can be shared. S5PC100 specific drivers will be added in "arch/arm/plat-s5pcxx" or "arch/arm/mach-s5pc100" Signed-off-by: Byungho Min [ben-linux@fluff.org: tidy and edit description] Signed-off-by: Ben Dooks --- arch/arm/Kconfig | 13 +++++++ arch/arm/Makefile | 2 ++ arch/arm/mach-s5pc100/Kconfig | 22 ++++++++++++ arch/arm/mach-s5pc100/Makefile | 17 +++++++++ arch/arm/mach-s5pc100/Makefile.boot | 2 ++ arch/arm/mach-s5pc100/include/mach/hardware.h | 2 +- arch/arm/plat-s5pc1xx/Kconfig | 50 +++++++++++++++++++++++++++ arch/arm/plat-s5pc1xx/Makefile | 26 ++++++++++++++ 8 files changed, 133 insertions(+), 1 deletion(-) create mode 100644 arch/arm/mach-s5pc100/Kconfig create mode 100644 arch/arm/mach-s5pc100/Makefile create mode 100644 arch/arm/mach-s5pc100/Makefile.boot create mode 100644 arch/arm/plat-s5pc1xx/Kconfig create mode 100644 arch/arm/plat-s5pc1xx/Makefile diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index f07a4ba281b..be89ab3aacf 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -588,6 +588,14 @@ config ARCH_S3C64XX help Samsung S3C64XX series based systems +config ARCH_S5PC1XX + bool "Samsung S5PC1XX" + select GENERIC_GPIO + select HAVE_CLK + select CPU_V7 + help + Samsung S5PC1XX series based systems + config ARCH_SHARK bool "Shark" select CPU_SA110 @@ -698,6 +706,7 @@ source "arch/arm/mach-kirkwood/Kconfig" source "arch/arm/plat-s3c24xx/Kconfig" source "arch/arm/plat-s3c64xx/Kconfig" source "arch/arm/plat-s3c/Kconfig" +source "arch/arm/plat-s5pc1xx/Kconfig" if ARCH_S3C2410 source "arch/arm/mach-s3c2400/Kconfig" @@ -715,6 +724,10 @@ endif source "arch/arm/plat-stmp3xxx/Kconfig" +if ARCH_S5PC1XX +source "arch/arm/mach-s5pc100/Kconfig" +endif + source "arch/arm/mach-lh7a40x/Kconfig" source "arch/arm/mach-h720x/Kconfig" diff --git a/arch/arm/Makefile b/arch/arm/Makefile index c877d6df23d..96659415953 100644 --- a/arch/arm/Makefile +++ b/arch/arm/Makefile @@ -150,6 +150,7 @@ machine-$(CONFIG_ARCH_RPC) := rpc machine-$(CONFIG_ARCH_S3C2410) := s3c2410 s3c2400 s3c2412 s3c2440 s3c2442 s3c2443 machine-$(CONFIG_ARCH_S3C24A0) := s3c24a0 machine-$(CONFIG_ARCH_S3C64XX) := s3c6400 s3c6410 +machine-$(CONFIG_ARCH_S5PC1XX) := s5pc100 machine-$(CONFIG_ARCH_SA1100) := sa1100 machine-$(CONFIG_ARCH_SHARK) := shark machine-$(CONFIG_ARCH_STMP378X) := stmp378x @@ -168,6 +169,7 @@ plat-$(CONFIG_PLAT_ORION) := orion plat-$(CONFIG_PLAT_PXA) := pxa plat-$(CONFIG_PLAT_S3C24XX) := s3c24xx s3c plat-$(CONFIG_PLAT_S3C64XX) := s3c64xx s3c +plat-$(CONFIG_PLAT_S5PC1XX) := s5pc1xx s3c plat-$(CONFIG_ARCH_STMP3XXX) := stmp3xxx ifeq ($(CONFIG_ARCH_EBSA110),y) diff --git a/arch/arm/mach-s5pc100/Kconfig b/arch/arm/mach-s5pc100/Kconfig new file mode 100644 index 00000000000..b1a4ba50441 --- /dev/null +++ b/arch/arm/mach-s5pc100/Kconfig @@ -0,0 +1,22 @@ +# arch/arm/mach-s5pc100/Kconfig +# +# Copyright 2009 Samsung Electronics Co. +# Byungho Min +# +# Licensed under GPLv2 + +# Configuration options for the S5PC100 CPU + +config CPU_S5PC100 + bool + select CPU_S5PC100_INIT + select CPU_S5PC100_CLOCK + help + Enable S5PC100 CPU support + +config MACH_SMDKC100 + bool "SMDKC100" + select CPU_S5PC100 + select S5PC1XX_SETUP_I2C1 + help + Machine support for the Samsung SMDKC100 diff --git a/arch/arm/mach-s5pc100/Makefile b/arch/arm/mach-s5pc100/Makefile new file mode 100644 index 00000000000..afc89b381d7 --- /dev/null +++ b/arch/arm/mach-s5pc100/Makefile @@ -0,0 +1,17 @@ +# arch/arm/mach-s5pc100/Makefile +# +# Copyright 2009 Samsung Electronics Co. +# +# Licensed under GPLv2 + +obj-y := +obj-m := +obj-n := +obj- := + +# Core support for S5PC100 system + +obj-$(CONFIG_CPU_S5PC100) += cpu.o + +# machine support +obj-$(CONFIG_MACH_SMDKC100) += mach-smdkc100.o diff --git a/arch/arm/mach-s5pc100/Makefile.boot b/arch/arm/mach-s5pc100/Makefile.boot new file mode 100644 index 00000000000..ff90aa13bd6 --- /dev/null +++ b/arch/arm/mach-s5pc100/Makefile.boot @@ -0,0 +1,2 @@ + zreladdr-y := 0x20008000 +params_phys-y := 0x20000100 diff --git a/arch/arm/mach-s5pc100/include/mach/hardware.h b/arch/arm/mach-s5pc100/include/mach/hardware.h index 38ce8206a1a..6b38618c2fd 100644 --- a/arch/arm/mach-s5pc100/include/mach/hardware.h +++ b/arch/arm/mach-s5pc100/include/mach/hardware.h @@ -3,7 +3,7 @@ * Copyright 2009 Samsung Electronics Co. * Byungho Min * - * S3C6400 - Hardware support + * S5PC100 - Hardware support */ #ifndef __ASM_ARCH_HARDWARE_H diff --git a/arch/arm/plat-s5pc1xx/Kconfig b/arch/arm/plat-s5pc1xx/Kconfig new file mode 100644 index 00000000000..a8a711c3c06 --- /dev/null +++ b/arch/arm/plat-s5pc1xx/Kconfig @@ -0,0 +1,50 @@ +# arch/arm/plat-s5pc1xx/Kconfig +# +# Copyright 2009 Samsung Electronics Co. +# Byungho Min +# +# Licensed under GPLv2 + +config PLAT_S5PC1XX + bool + depends on ARCH_S5PC1XX + default y + select PLAT_S3C + select ARM_VIC + select NO_IOPORT + select ARCH_REQUIRE_GPIOLIB + select S3C_GPIO_TRACK + select S3C_GPIO_PULL_UPDOWN + help + Base platform code for any Samsung S5PC1XX device + +if PLAT_S5PC1XX + +# Configuration options shared by all S3C64XX implementations + +config CPU_S5PC100_INIT + bool + help + Common initialisation code for the S5PC1XX + +config CPU_S5PC100_CLOCK + bool + help + Common clock support code for the S5PC1XX + +# platform specific device setup + +config S5PC100_SETUP_I2C0 + bool + default y + help + Common setup code for i2c bus 0. + + Note, currently since i2c0 is always compiled, this setup helper + is always compiled with it. + +config S5PC100_SETUP_I2C1 + bool + help + Common setup code for i2c bus 1. +endif diff --git a/arch/arm/plat-s5pc1xx/Makefile b/arch/arm/plat-s5pc1xx/Makefile new file mode 100644 index 00000000000..f1ecb2c37ee --- /dev/null +++ b/arch/arm/plat-s5pc1xx/Makefile @@ -0,0 +1,26 @@ +# arch/arm/plat-s5pc1xx/Makefile +# +# Copyright 2009 Samsung Electronics Co. +# +# Licensed under GPLv2 + +obj-y := +obj-m := +obj-n := dummy.o +obj- := + +# Core files + +obj-y += dev-uart.o +obj-y += cpu.o +obj-y += irq.o + +# CPU support + +obj-$(CONFIG_CPU_S5PC100_INIT) += s5pc100-init.o +obj-$(CONFIG_CPU_S5PC100_CLOCK) += s5pc100-clock.o + +# Device setup + +obj-$(CONFIG_S5PC100_SETUP_I2C0) += setup-i2c0.o +obj-$(CONFIG_S5PC100_SETUP_I2C1) += setup-i2c1.o -- cgit v1.2.3 From e119766f4e15274e2cd9bb5f25119c8b008d920b Mon Sep 17 00:00:00 2001 From: Byungho Min Date: Tue, 23 Jun 2009 21:40:28 +0900 Subject: ARM: S5PC100: Board and configuration file SMDKC100 board support. The board can be obtained from meritech (http://www.meritech.co.kr) Signed-off-by: Byungho Min [ben-linux@fluff.org: fixup subject and description] Signed-off-by: Ben Dooks --- arch/arm/configs/s5pc100_defconfig | 892 ++++++++++++++++++++++++++++++++++ arch/arm/mach-s5pc100/mach-smdkc100.c | 103 ++++ 2 files changed, 995 insertions(+) create mode 100644 arch/arm/configs/s5pc100_defconfig create mode 100644 arch/arm/mach-s5pc100/mach-smdkc100.c diff --git a/arch/arm/configs/s5pc100_defconfig b/arch/arm/configs/s5pc100_defconfig new file mode 100644 index 00000000000..b0d7d3d3a5e --- /dev/null +++ b/arch/arm/configs/s5pc100_defconfig @@ -0,0 +1,892 @@ +# +# Automatically generated make config: don't edit +# Linux kernel version: 2.6.30 +# Wed Jul 1 15:53:07 2009 +# +CONFIG_ARM=y +CONFIG_SYS_SUPPORTS_APM_EMULATION=y +CONFIG_GENERIC_GPIO=y +CONFIG_MMU=y +CONFIG_NO_IOPORT=y +CONFIG_GENERIC_HARDIRQS=y +CONFIG_STACKTRACE_SUPPORT=y +CONFIG_HAVE_LATENCYTOP_SUPPORT=y +CONFIG_LOCKDEP_SUPPORT=y +CONFIG_TRACE_IRQFLAGS_SUPPORT=y +CONFIG_HARDIRQS_SW_RESEND=y +CONFIG_GENERIC_IRQ_PROBE=y +CONFIG_RWSEM_GENERIC_SPINLOCK=y +CONFIG_GENERIC_HWEIGHT=y +CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y +CONFIG_VECTORS_BASE=0xffff0000 +CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" +CONFIG_CONSTRUCTORS=y + +# +# General setup +# +CONFIG_EXPERIMENTAL=y +CONFIG_BROKEN_ON_SMP=y +CONFIG_INIT_ENV_ARG_LIMIT=32 +CONFIG_LOCALVERSION="" +CONFIG_LOCALVERSION_AUTO=y +CONFIG_SWAP=y +# CONFIG_SYSVIPC is not set +# CONFIG_BSD_PROCESS_ACCT is not set + +# +# RCU Subsystem +# +CONFIG_CLASSIC_RCU=y +# CONFIG_TREE_RCU is not set +# CONFIG_PREEMPT_RCU is not set +# CONFIG_TREE_RCU_TRACE is not set +# CONFIG_PREEMPT_RCU_TRACE is not set +# CONFIG_IKCONFIG is not set +CONFIG_LOG_BUF_SHIFT=17 +# CONFIG_GROUP_SCHED is not set +# CONFIG_CGROUPS is not set +CONFIG_SYSFS_DEPRECATED=y +CONFIG_SYSFS_DEPRECATED_V2=y +# CONFIG_RELAY is not set +CONFIG_NAMESPACES=y +# CONFIG_UTS_NS is not set +# CONFIG_USER_NS is not set +# CONFIG_PID_NS is not set +CONFIG_BLK_DEV_INITRD=y +CONFIG_INITRAMFS_SOURCE="" +CONFIG_RD_GZIP=y +CONFIG_RD_BZIP2=y +CONFIG_RD_LZMA=y +CONFIG_CC_OPTIMIZE_FOR_SIZE=y +CONFIG_SYSCTL=y +CONFIG_ANON_INODES=y +# CONFIG_EMBEDDED is not set +CONFIG_UID16=y +CONFIG_SYSCTL_SYSCALL=y +CONFIG_KALLSYMS=y +CONFIG_KALLSYMS_ALL=y +# CONFIG_KALLSYMS_EXTRA_PASS is not set +CONFIG_HOTPLUG=y +CONFIG_PRINTK=y +CONFIG_BUG=y +CONFIG_ELF_CORE=y +CONFIG_BASE_FULL=y +CONFIG_FUTEX=y +CONFIG_EPOLL=y +CONFIG_SIGNALFD=y +CONFIG_TIMERFD=y +CONFIG_EVENTFD=y +CONFIG_SHMEM=y +CONFIG_AIO=y + +# +# Performance Counters +# +CONFIG_VM_EVENT_COUNTERS=y +CONFIG_SLUB_DEBUG=y +# CONFIG_STRIP_ASM_SYMS is not set +CONFIG_COMPAT_BRK=y +# CONFIG_SLAB is not set +CONFIG_SLUB=y +# CONFIG_SLOB is not set +# CONFIG_PROFILING is not set +# CONFIG_MARKERS is not set +CONFIG_HAVE_OPROFILE=y +# CONFIG_KPROBES is not set +CONFIG_HAVE_KPROBES=y +CONFIG_HAVE_KRETPROBES=y +CONFIG_HAVE_CLK=y + +# +# GCOV-based kernel profiling +# +# CONFIG_SLOW_WORK is not set +CONFIG_HAVE_GENERIC_DMA_COHERENT=y +CONFIG_SLABINFO=y +CONFIG_RT_MUTEXES=y +CONFIG_BASE_SMALL=0 +CONFIG_MODULES=y +# CONFIG_MODULE_FORCE_LOAD is not set +CONFIG_MODULE_UNLOAD=y +# CONFIG_MODULE_FORCE_UNLOAD is not set +# CONFIG_MODVERSIONS is not set +# CONFIG_MODULE_SRCVERSION_ALL is not set +CONFIG_BLOCK=y +CONFIG_LBDAF=y +# CONFIG_BLK_DEV_BSG is not set +# CONFIG_BLK_DEV_INTEGRITY is not set + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +CONFIG_IOSCHED_AS=y +CONFIG_IOSCHED_DEADLINE=y +CONFIG_IOSCHED_CFQ=y +# CONFIG_DEFAULT_AS is not set +# CONFIG_DEFAULT_DEADLINE is not set +CONFIG_DEFAULT_CFQ=y +# CONFIG_DEFAULT_NOOP is not set +CONFIG_DEFAULT_IOSCHED="cfq" +# CONFIG_FREEZER is not set + +# +# System Type +# +# CONFIG_ARCH_AAEC2000 is not set +# CONFIG_ARCH_INTEGRATOR is not set +# CONFIG_ARCH_REALVIEW is not set +# CONFIG_ARCH_VERSATILE is not set +# CONFIG_ARCH_AT91 is not set +# CONFIG_ARCH_CLPS711X is not set +# CONFIG_ARCH_GEMINI is not set +# CONFIG_ARCH_EBSA110 is not set +# CONFIG_ARCH_EP93XX is not set +# CONFIG_ARCH_FOOTBRIDGE is not set +# CONFIG_ARCH_MXC is not set +# CONFIG_ARCH_STMP3XXX is not set +# CONFIG_ARCH_NETX is not set +# CONFIG_ARCH_H720X is not set +# CONFIG_ARCH_IOP13XX is not set +# CONFIG_ARCH_IOP32X is not set +# CONFIG_ARCH_IOP33X is not set +# CONFIG_ARCH_IXP23XX is not set +# CONFIG_ARCH_IXP2000 is not set +# CONFIG_ARCH_IXP4XX is not set +# CONFIG_ARCH_L7200 is not set +# CONFIG_ARCH_KIRKWOOD is not set +# CONFIG_ARCH_LOKI is not set +# CONFIG_ARCH_MV78XX0 is not set +# CONFIG_ARCH_ORION5X is not set +# CONFIG_ARCH_MMP is not set +# CONFIG_ARCH_KS8695 is not set +# CONFIG_ARCH_NS9XXX is not set +# CONFIG_ARCH_W90X900 is not set +# CONFIG_ARCH_PNX4008 is not set +# CONFIG_ARCH_PXA is not set +# CONFIG_ARCH_MSM is not set +# CONFIG_ARCH_RPC is not set +# CONFIG_ARCH_SA1100 is not set +# CONFIG_ARCH_S3C2410 is not set +# CONFIG_ARCH_S3C64XX is not set +CONFIG_ARCH_S5PC1XX=y +# CONFIG_ARCH_SHARK is not set +# CONFIG_ARCH_LH7A40X is not set +# CONFIG_ARCH_U300 is not set +# CONFIG_ARCH_DAVINCI is not set +# CONFIG_ARCH_OMAP is not set +CONFIG_PLAT_S3C=y + +# +# Boot options +# +# CONFIG_S3C_BOOT_ERROR_RESET is not set +CONFIG_S3C_BOOT_UART_FORCE_FIFO=y + +# +# Power management +# +CONFIG_S3C_LOWLEVEL_UART_PORT=0 +CONFIG_S3C_GPIO_SPACE=0 +CONFIG_S3C_GPIO_TRACK=y +CONFIG_S3C_GPIO_PULL_UPDOWN=y +CONFIG_PLAT_S5PC1XX=y +CONFIG_CPU_S5PC100_INIT=y +CONFIG_CPU_S5PC100_CLOCK=y +CONFIG_S5PC100_SETUP_I2C0=y +CONFIG_CPU_S5PC100=y +CONFIG_MACH_SMDKC100=y + +# +# Processor Type +# +CONFIG_CPU_32=y +CONFIG_CPU_32v6K=y +CONFIG_CPU_V7=y +CONFIG_CPU_32v7=y +CONFIG_CPU_ABRT_EV7=y +CONFIG_CPU_PABRT_IFAR=y +CONFIG_CPU_CACHE_V7=y +CONFIG_CPU_CACHE_VIPT=y +CONFIG_CPU_COPY_V6=y +CONFIG_CPU_TLB_V7=y +CONFIG_CPU_HAS_ASID=y +CONFIG_CPU_CP15=y +CONFIG_CPU_CP15_MMU=y + +# +# Processor Features +# +CONFIG_ARM_THUMB=y +# CONFIG_ARM_THUMBEE is not set +# CONFIG_CPU_ICACHE_DISABLE is not set +# CONFIG_CPU_DCACHE_DISABLE is not set +# CONFIG_CPU_BPREDICT_DISABLE is not set +CONFIG_HAS_TLS_REG=y +# CONFIG_ARM_ERRATA_430973 is not set +# CONFIG_ARM_ERRATA_458693 is not set +# CONFIG_ARM_ERRATA_460075 is not set +CONFIG_ARM_VIC=y +CONFIG_ARM_VIC_NR=2 + +# +# Bus support +# +# CONFIG_PCI_SYSCALL is not set +# CONFIG_ARCH_SUPPORTS_MSI is not set +# CONFIG_PCCARD is not set + +# +# Kernel Features +# +CONFIG_VMSPLIT_3G=y +# CONFIG_VMSPLIT_2G is not set +# CONFIG_VMSPLIT_1G is not set +CONFIG_PAGE_OFFSET=0xC0000000 +# CONFIG_PREEMPT is not set +CONFIG_HZ=100 +CONFIG_AEABI=y +CONFIG_OABI_COMPAT=y +# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set +# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set +# CONFIG_HIGHMEM is not set +CONFIG_SELECT_MEMORY_MODEL=y +CONFIG_FLATMEM_MANUAL=y +# CONFIG_DISCONTIGMEM_MANUAL is not set +# CONFIG_SPARSEMEM_MANUAL is not set +CONFIG_FLATMEM=y +CONFIG_FLAT_NODE_MEM_MAP=y +CONFIG_PAGEFLAGS_EXTENDED=y +CONFIG_SPLIT_PTLOCK_CPUS=4 +# CONFIG_PHYS_ADDR_T_64BIT is not set +CONFIG_ZONE_DMA_FLAG=0 +CONFIG_VIRT_TO_BUS=y +CONFIG_HAVE_MLOCK=y +CONFIG_HAVE_MLOCKED_PAGE_BIT=y +CONFIG_DEFAULT_MMAP_MIN_ADDR=4096 +CONFIG_ALIGNMENT_TRAP=y +# CONFIG_UACCESS_WITH_MEMCPY is not set + +# +# Boot options +# +CONFIG_ZBOOT_ROM_TEXT=0 +CONFIG_ZBOOT_ROM_BSS=0 +CONFIG_CMDLINE="root=/dev/mtdblock2 rootfstype=cramfs init=/linuxrc console=ttySAC2,115200 mem=128M" +# CONFIG_XIP_KERNEL is not set +# CONFIG_KEXEC is not set + +# +# CPU Power Management +# +# CONFIG_CPU_IDLE is not set + +# +# Floating point emulation +# + +# +# At least one emulation must be selected +# +# CONFIG_FPE_NWFPE is not set +# CONFIG_FPE_FASTFPE is not set +# CONFIG_VFP is not set + +# +# Userspace binary formats +# +CONFIG_BINFMT_ELF=y +# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set +CONFIG_HAVE_AOUT=y +# CONFIG_BINFMT_AOUT is not set +# CONFIG_BINFMT_MISC is not set + +# +# Power management options +# +# CONFIG_PM is not set +CONFIG_ARCH_SUSPEND_POSSIBLE=y +# CONFIG_NET is not set + +# +# Device Drivers +# + +# +# Generic Driver Options +# +CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +CONFIG_STANDALONE=y +CONFIG_PREVENT_FIRMWARE_BUILD=y +CONFIG_FW_LOADER=y +CONFIG_FIRMWARE_IN_KERNEL=y +CONFIG_EXTRA_FIRMWARE="" +# CONFIG_DEBUG_DRIVER is not set +# CONFIG_DEBUG_DEVRES is not set +# CONFIG_SYS_HYPERVISOR is not set +# CONFIG_MTD is not set +# CONFIG_PARPORT is not set +CONFIG_BLK_DEV=y +# CONFIG_BLK_DEV_COW_COMMON is not set +CONFIG_BLK_DEV_LOOP=y +# CONFIG_BLK_DEV_CRYPTOLOOP is not set +CONFIG_BLK_DEV_RAM=y +CONFIG_BLK_DEV_RAM_COUNT=16 +CONFIG_BLK_DEV_RAM_SIZE=8192 +# CONFIG_BLK_DEV_XIP is not set +# CONFIG_CDROM_PKTCDVD is not set +# CONFIG_MG_DISK is not set +CONFIG_MISC_DEVICES=y +# CONFIG_ICS932S401 is not set +# CONFIG_ENCLOSURE_SERVICES is not set +# CONFIG_ISL29003 is not set +# CONFIG_C2PORT is not set + +# +# EEPROM support +# +CONFIG_EEPROM_AT24=y +# CONFIG_EEPROM_LEGACY is not set +# CONFIG_EEPROM_MAX6875 is not set +# CONFIG_EEPROM_93CX6 is not set +CONFIG_HAVE_IDE=y +# CONFIG_IDE is not set + +# +# SCSI device support +# +# CONFIG_RAID_ATTRS is not set +# CONFIG_SCSI is not set +# CONFIG_SCSI_DMA is not set +# CONFIG_SCSI_NETLINK is not set +# CONFIG_ATA is not set +# CONFIG_MD is not set + +# +# Input device support +# +CONFIG_INPUT=y +# CONFIG_INPUT_FF_MEMLESS is not set +# CONFIG_INPUT_POLLDEV is not set + +# +# Userland interfaces +# +CONFIG_INPUT_MOUSEDEV=y +CONFIG_INPUT_MOUSEDEV_PSAUX=y +CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 +CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 +# CONFIG_INPUT_JOYDEV is not set +# CONFIG_INPUT_EVDEV is not set +# CONFIG_INPUT_EVBUG is not set + +# +# Input Device Drivers +# +CONFIG_INPUT_KEYBOARD=y +CONFIG_KEYBOARD_ATKBD=y +# CONFIG_KEYBOARD_SUNKBD is not set +# CONFIG_KEYBOARD_LKKBD is not set +# CONFIG_KEYBOARD_XTKBD is not set +# CONFIG_KEYBOARD_NEWTON is not set +# CONFIG_KEYBOARD_STOWAWAY is not set +# CONFIG_KEYBOARD_GPIO is not set +CONFIG_INPUT_MOUSE=y +CONFIG_MOUSE_PS2=y +CONFIG_MOUSE_PS2_ALPS=y +CONFIG_MOUSE_PS2_LOGIPS2PP=y +CONFIG_MOUSE_PS2_SYNAPTICS=y +CONFIG_MOUSE_PS2_TRACKPOINT=y +# CONFIG_MOUSE_PS2_ELANTECH is not set +# CONFIG_MOUSE_PS2_TOUCHKIT is not set +# CONFIG_MOUSE_SERIAL is not set +# CONFIG_MOUSE_APPLETOUCH is not set +# CONFIG_MOUSE_BCM5974 is not set +# CONFIG_MOUSE_VSXXXAA is not set +# CONFIG_MOUSE_GPIO is not set +# CONFIG_MOUSE_SYNAPTICS_I2C is not set +# CONFIG_INPUT_JOYSTICK is not set +# CONFIG_INPUT_TABLET is not set +# CONFIG_INPUT_TOUCHSCREEN is not set +# CONFIG_INPUT_MISC is not set + +# +# Hardware I/O ports +# +CONFIG_SERIO=y +CONFIG_SERIO_SERPORT=y +CONFIG_SERIO_LIBPS2=y +# CONFIG_SERIO_RAW is not set +# CONFIG_GAMEPORT is not set + +# +# Character devices +# +CONFIG_VT=y +CONFIG_CONSOLE_TRANSLATIONS=y +CONFIG_VT_CONSOLE=y +CONFIG_HW_CONSOLE=y +# CONFIG_VT_HW_CONSOLE_BINDING is not set +CONFIG_DEVKMEM=y +# CONFIG_SERIAL_NONSTANDARD is not set + +# +# Serial drivers +# +CONFIG_SERIAL_8250=y +# CONFIG_SERIAL_8250_CONSOLE is not set +CONFIG_SERIAL_8250_NR_UARTS=4 +CONFIG_SERIAL_8250_RUNTIME_UARTS=4 +# CONFIG_SERIAL_8250_EXTENDED is not set + +# +# Non-8250 serial port support +# +CONFIG_SERIAL_SAMSUNG=y +CONFIG_SERIAL_SAMSUNG_UARTS=3 +# CONFIG_SERIAL_SAMSUNG_DEBUG is not set +CONFIG_SERIAL_SAMSUNG_CONSOLE=y +CONFIG_SERIAL_CORE=y +CONFIG_SERIAL_CORE_CONSOLE=y +CONFIG_UNIX98_PTYS=y +# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set +CONFIG_LEGACY_PTYS=y +CONFIG_LEGACY_PTY_COUNT=256 +# CONFIG_IPMI_HANDLER is not set +CONFIG_HW_RANDOM=y +# CONFIG_HW_RANDOM_TIMERIOMEM is not set +# CONFIG_R3964 is not set +# CONFIG_RAW_DRIVER is not set +# CONFIG_TCG_TPM is not set +CONFIG_I2C=y +CONFIG_I2C_BOARDINFO=y +CONFIG_I2C_CHARDEV=y +CONFIG_I2C_HELPER_AUTO=y + +# +# I2C Hardware Bus support +# + +# +# I2C system bus drivers (mostly embedded / system-on-chip) +# +# CONFIG_I2C_GPIO is not set +# CONFIG_I2C_OCORES is not set +# CONFIG_I2C_SIMTEC is not set + +# +# External I2C/SMBus adapter drivers +# +# CONFIG_I2C_PARPORT_LIGHT is not set +# CONFIG_I2C_TAOS_EVM is not set + +# +# Other I2C/SMBus bus drivers +# +# CONFIG_I2C_PCA_PLATFORM is not set +# CONFIG_I2C_STUB is not set + +# +# Miscellaneous I2C Chip support +# +# CONFIG_DS1682 is not set +# CONFIG_SENSORS_PCF8574 is not set +# CONFIG_PCF8575 is not set +# CONFIG_SENSORS_PCA9539 is not set +# CONFIG_SENSORS_TSL2550 is not set +# CONFIG_I2C_DEBUG_CORE is not set +# CONFIG_I2C_DEBUG_ALGO is not set +# CONFIG_I2C_DEBUG_BUS is not set +# CONFIG_I2C_DEBUG_CHIP is not set +# CONFIG_SPI is not set +CONFIG_ARCH_REQUIRE_GPIOLIB=y +CONFIG_GPIOLIB=y +# CONFIG_DEBUG_GPIO is not set +# CONFIG_GPIO_SYSFS is not set + +# +# Memory mapped GPIO expanders: +# + +# +# I2C GPIO expanders: +# +# CONFIG_GPIO_MAX732X is not set +# CONFIG_GPIO_PCA953X is not set +# CONFIG_GPIO_PCF857X is not set + +# +# PCI GPIO expanders: +# + +# +# SPI GPIO expanders: +# +# CONFIG_W1 is not set +# CONFIG_POWER_SUPPLY is not set +CONFIG_HWMON=y +# CONFIG_HWMON_VID is not set +# CONFIG_SENSORS_AD7414 is not set +# CONFIG_SENSORS_AD7418 is not set +# CONFIG_SENSORS_ADM1021 is not set +# CONFIG_SENSORS_ADM1025 is not set +# CONFIG_SENSORS_ADM1026 is not set +# CONFIG_SENSORS_ADM1029 is not set +# CONFIG_SENSORS_ADM1031 is not set +# CONFIG_SENSORS_ADM9240 is not set +# CONFIG_SENSORS_ADT7462 is not set +# CONFIG_SENSORS_ADT7470 is not set +# CONFIG_SENSORS_ADT7473 is not set +# CONFIG_SENSORS_ADT7475 is not set +# CONFIG_SENSORS_ATXP1 is not set +# CONFIG_SENSORS_DS1621 is not set +# CONFIG_SENSORS_F71805F is not set +# CONFIG_SENSORS_F71882FG is not set +# CONFIG_SENSORS_F75375S is not set +# CONFIG_SENSORS_G760A is not set +# CONFIG_SENSORS_GL518SM is not set +# CONFIG_SENSORS_GL520SM is not set +# CONFIG_SENSORS_IT87 is not set +# CONFIG_SENSORS_LM63 is not set +# CONFIG_SENSORS_LM75 is not set +# CONFIG_SENSORS_LM77 is not set +# CONFIG_SENSORS_LM78 is not set +# CONFIG_SENSORS_LM80 is not set +# CONFIG_SENSORS_LM83 is not set +# CONFIG_SENSORS_LM85 is not set +# CONFIG_SENSORS_LM87 is not set +# CONFIG_SENSORS_LM90 is not set +# CONFIG_SENSORS_LM92 is not set +# CONFIG_SENSORS_LM93 is not set +# CONFIG_SENSORS_LTC4215 is not set +# CONFIG_SENSORS_LTC4245 is not set +# CONFIG_SENSORS_LM95241 is not set +# CONFIG_SENSORS_MAX1619 is not set +# CONFIG_SENSORS_MAX6650 is not set +# CONFIG_SENSORS_PC87360 is not set +# CONFIG_SENSORS_PC87427 is not set +# CONFIG_SENSORS_PCF8591 is not set +# CONFIG_SENSORS_SHT15 is not set +# CONFIG_SENSORS_DME1737 is not set +# CONFIG_SENSORS_SMSC47M1 is not set +# CONFIG_SENSORS_SMSC47M192 is not set +# CONFIG_SENSORS_SMSC47B397 is not set +# CONFIG_SENSORS_ADS7828 is not set +# CONFIG_SENSORS_THMC50 is not set +# CONFIG_SENSORS_TMP401 is not set +# CONFIG_SENSORS_VT1211 is not set +# CONFIG_SENSORS_W83781D is not set +# CONFIG_SENSORS_W83791D is not set +# CONFIG_SENSORS_W83792D is not set +# CONFIG_SENSORS_W83793 is not set +# CONFIG_SENSORS_W83L785TS is not set +# CONFIG_SENSORS_W83L786NG is not set +# CONFIG_SENSORS_W83627HF is not set +# CONFIG_SENSORS_W83627EHF is not set +# CONFIG_HWMON_DEBUG_CHIP is not set +# CONFIG_THERMAL is not set +# CONFIG_THERMAL_HWMON is not set +# CONFIG_WATCHDOG is not set +CONFIG_SSB_POSSIBLE=y + +# +# Sonics Silicon Backplane +# +# CONFIG_SSB is not set + +# +# Multifunction device drivers +# +# CONFIG_MFD_CORE is not set +# CONFIG_MFD_SM501 is not set +# CONFIG_MFD_ASIC3 is not set +# CONFIG_HTC_EGPIO is not set +# CONFIG_HTC_PASIC3 is not set +# CONFIG_TPS65010 is not set +# CONFIG_TWL4030_CORE is not set +# CONFIG_MFD_TMIO is not set +# CONFIG_MFD_T7L66XB is not set +# CONFIG_MFD_TC6387XB is not set +# CONFIG_MFD_TC6393XB is not set +# CONFIG_PMIC_DA903X is not set +# CONFIG_MFD_WM8400 is not set +# CONFIG_MFD_WM8350_I2C is not set +# CONFIG_MFD_PCF50633 is not set +# CONFIG_AB3100_CORE is not set +# CONFIG_MEDIA_SUPPORT is not set + +# +# Graphics support +# +# CONFIG_VGASTATE is not set +# CONFIG_VIDEO_OUTPUT_CONTROL is not set +# CONFIG_FB is not set +# CONFIG_BACKLIGHT_LCD_SUPPORT is not set + +# +# Display device support +# +# CONFIG_DISPLAY_SUPPORT is not set + +# +# Console display driver support +# +# CONFIG_VGA_CONSOLE is not set +CONFIG_DUMMY_CONSOLE=y +# CONFIG_SOUND is not set +CONFIG_HID_SUPPORT=y +CONFIG_HID=y +CONFIG_HID_DEBUG=y +# CONFIG_HIDRAW is not set +# CONFIG_HID_PID is not set + +# +# Special HID drivers +# +CONFIG_USB_SUPPORT=y +CONFIG_USB_ARCH_HAS_HCD=y +# CONFIG_USB_ARCH_HAS_OHCI is not set +# CONFIG_USB_ARCH_HAS_EHCI is not set +# CONFIG_USB is not set + +# +# Enable Host or Gadget support to see Inventra options +# + +# +# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may +# +# CONFIG_USB_GADGET is not set + +# +# OTG and related infrastructure +# +CONFIG_MMC=y +CONFIG_MMC_DEBUG=y +CONFIG_MMC_UNSAFE_RESUME=y + +# +# MMC/SD/SDIO Card Drivers +# +CONFIG_MMC_BLOCK=y +CONFIG_MMC_BLOCK_BOUNCE=y +CONFIG_SDIO_UART=y +# CONFIG_MMC_TEST is not set + +# +# MMC/SD/SDIO Host Controller Drivers +# +CONFIG_MMC_SDHCI=y +# CONFIG_MMC_SDHCI_PLTFM is not set +# CONFIG_MEMSTICK is not set +# CONFIG_ACCESSIBILITY is not set +# CONFIG_NEW_LEDS is not set +CONFIG_RTC_LIB=y +# CONFIG_RTC_CLASS is not set +# CONFIG_DMADEVICES is not set +# CONFIG_AUXDISPLAY is not set +# CONFIG_REGULATOR is not set +# CONFIG_UIO is not set +# CONFIG_STAGING is not set + +# +# File systems +# +CONFIG_EXT2_FS=y +# CONFIG_EXT2_FS_XATTR is not set +# CONFIG_EXT2_FS_XIP is not set +CONFIG_EXT3_FS=y +# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set +CONFIG_EXT3_FS_XATTR=y +CONFIG_EXT3_FS_POSIX_ACL=y +CONFIG_EXT3_FS_SECURITY=y +# CONFIG_EXT4_FS is not set +CONFIG_JBD=y +CONFIG_FS_MBCACHE=y +# CONFIG_REISERFS_FS is not set +# CONFIG_JFS_FS is not set +CONFIG_FS_POSIX_ACL=y +# CONFIG_XFS_FS is not set +# CONFIG_GFS2_FS is not set +# CONFIG_BTRFS_FS is not set +CONFIG_FILE_LOCKING=y +CONFIG_FSNOTIFY=y +CONFIG_DNOTIFY=y +CONFIG_INOTIFY=y +CONFIG_INOTIFY_USER=y +# CONFIG_QUOTA is not set +# CONFIG_AUTOFS_FS is not set +# CONFIG_AUTOFS4_FS is not set +# CONFIG_FUSE_FS is not set +CONFIG_GENERIC_ACL=y + +# +# Caches +# +# CONFIG_FSCACHE is not set + +# +# CD-ROM/DVD Filesystems +# +# CONFIG_ISO9660_FS is not set +# CONFIG_UDF_FS is not set + +# +# DOS/FAT/NT Filesystems +# +# CONFIG_MSDOS_FS is not set +# CONFIG_VFAT_FS is not set +# CONFIG_NTFS_FS is not set + +# +# Pseudo filesystems +# +CONFIG_PROC_FS=y +CONFIG_PROC_SYSCTL=y +CONFIG_PROC_PAGE_MONITOR=y +CONFIG_SYSFS=y +CONFIG_TMPFS=y +CONFIG_TMPFS_POSIX_ACL=y +# CONFIG_HUGETLB_PAGE is not set +# CONFIG_CONFIGFS_FS is not set +CONFIG_MISC_FILESYSTEMS=y +# CONFIG_ADFS_FS is not set +# CONFIG_AFFS_FS is not set +# CONFIG_HFS_FS is not set +# CONFIG_HFSPLUS_FS is not set +# CONFIG_BEFS_FS is not set +# CONFIG_BFS_FS is not set +# CONFIG_EFS_FS is not set +CONFIG_CRAMFS=y +# CONFIG_SQUASHFS is not set +# CONFIG_VXFS_FS is not set +# CONFIG_MINIX_FS is not set +# CONFIG_OMFS_FS is not set +# CONFIG_HPFS_FS is not set +# CONFIG_QNX4FS_FS is not set +CONFIG_ROMFS_FS=y +CONFIG_ROMFS_BACKED_BY_BLOCK=y +# CONFIG_ROMFS_BACKED_BY_MTD is not set +# CONFIG_ROMFS_BACKED_BY_BOTH is not set +CONFIG_ROMFS_ON_BLOCK=y +# CONFIG_SYSV_FS is not set +# CONFIG_UFS_FS is not set +# CONFIG_NILFS2_FS is not set + +# +# Partition Types +# +# CONFIG_PARTITION_ADVANCED is not set +CONFIG_MSDOS_PARTITION=y +# CONFIG_NLS is not set + +# +# Kernel hacking +# +# CONFIG_PRINTK_TIME is not set +CONFIG_ENABLE_WARN_DEPRECATED=y +CONFIG_ENABLE_MUST_CHECK=y +CONFIG_FRAME_WARN=1024 +CONFIG_MAGIC_SYSRQ=y +# CONFIG_UNUSED_SYMBOLS is not set +# CONFIG_DEBUG_FS is not set +# CONFIG_HEADERS_CHECK is not set +CONFIG_DEBUG_KERNEL=y +# CONFIG_DEBUG_SHIRQ is not set +CONFIG_DETECT_SOFTLOCKUP=y +# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set +CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0 +CONFIG_DETECT_HUNG_TASK=y +# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set +CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0 +CONFIG_SCHED_DEBUG=y +# CONFIG_SCHEDSTATS is not set +# CONFIG_TIMER_STATS is not set +# CONFIG_DEBUG_OBJECTS is not set +# CONFIG_SLUB_DEBUG_ON is not set +# CONFIG_SLUB_STATS is not set +# CONFIG_DEBUG_KMEMLEAK is not set +CONFIG_DEBUG_RT_MUTEXES=y +CONFIG_DEBUG_PI_LIST=y +# CONFIG_RT_MUTEX_TESTER is not set +CONFIG_DEBUG_SPINLOCK=y +CONFIG_DEBUG_MUTEXES=y +# CONFIG_DEBUG_LOCK_ALLOC is not set +# CONFIG_PROVE_LOCKING is not set +# CONFIG_LOCK_STAT is not set +CONFIG_DEBUG_SPINLOCK_SLEEP=y +# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set +# CONFIG_DEBUG_KOBJECT is not set +CONFIG_DEBUG_BUGVERBOSE=y +CONFIG_DEBUG_INFO=y +# CONFIG_DEBUG_VM is not set +# CONFIG_DEBUG_WRITECOUNT is not set +CONFIG_DEBUG_MEMORY_INIT=y +# CONFIG_DEBUG_LIST is not set +# CONFIG_DEBUG_SG is not set +# CONFIG_DEBUG_NOTIFIERS is not set +# CONFIG_BOOT_PRINTK_DELAY is not set +# CONFIG_RCU_TORTURE_TEST is not set +# CONFIG_RCU_CPU_STALL_DETECTOR is not set +# CONFIG_BACKTRACE_SELF_TEST is not set +# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set +# CONFIG_FAULT_INJECTION is not set +# CONFIG_LATENCYTOP is not set +CONFIG_SYSCTL_SYSCALL_CHECK=y +# CONFIG_PAGE_POISONING is not set +CONFIG_HAVE_FUNCTION_TRACER=y +CONFIG_TRACING_SUPPORT=y +CONFIG_FTRACE=y +# CONFIG_FUNCTION_TRACER is not set +# CONFIG_SCHED_TRACER is not set +# CONFIG_ENABLE_DEFAULT_TRACERS is not set +# CONFIG_BOOT_TRACER is not set +CONFIG_BRANCH_PROFILE_NONE=y +# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set +# CONFIG_PROFILE_ALL_BRANCHES is not set +# CONFIG_STACK_TRACER is not set +# CONFIG_KMEMTRACE is not set +# CONFIG_WORKQUEUE_TRACER is not set +# CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_SAMPLES is not set +CONFIG_HAVE_ARCH_KGDB=y +# CONFIG_KGDB is not set +CONFIG_ARM_UNWIND=y +CONFIG_DEBUG_USER=y +CONFIG_DEBUG_ERRORS=y +# CONFIG_DEBUG_STACK_USAGE is not set +CONFIG_DEBUG_LL=y +# CONFIG_DEBUG_ICEDCC is not set +CONFIG_DEBUG_S3C_PORT=y +CONFIG_DEBUG_S3C_UART=0 + +# +# Security options +# +# CONFIG_KEYS is not set +# CONFIG_SECURITY is not set +# CONFIG_SECURITYFS is not set +# CONFIG_SECURITY_FILE_CAPABILITIES is not set +# CONFIG_CRYPTO is not set +# CONFIG_BINARY_PRINTF is not set + +# +# Library routines +# +CONFIG_BITREVERSE=y +CONFIG_GENERIC_FIND_LAST_BIT=y +# CONFIG_CRC_CCITT is not set +# CONFIG_CRC16 is not set +# CONFIG_CRC_T10DIF is not set +# CONFIG_CRC_ITU_T is not set +CONFIG_CRC32=y +# CONFIG_CRC7 is not set +# CONFIG_LIBCRC32C is not set +CONFIG_ZLIB_INFLATE=y +CONFIG_DECOMPRESS_GZIP=y +CONFIG_DECOMPRESS_BZIP2=y +CONFIG_DECOMPRESS_LZMA=y +CONFIG_HAS_IOMEM=y +CONFIG_HAS_DMA=y diff --git a/arch/arm/mach-s5pc100/mach-smdkc100.c b/arch/arm/mach-s5pc100/mach-smdkc100.c new file mode 100644 index 00000000000..214093cd763 --- /dev/null +++ b/arch/arm/mach-s5pc100/mach-smdkc100.c @@ -0,0 +1,103 @@ +/* linux/arch/arm/mach-s5pc100/mach-smdkc100.c + * + * Copyright 2009 Samsung Electronics Co. + * Author: Byungho Min + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * +*/ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include + +#include + +#include +#include + +#include + +#include +#include +#include +#include + +#define UCON (S3C2410_UCON_DEFAULT | S3C2410_UCON_UCLK) +#define ULCON (S3C2410_LCON_CS8 | S3C2410_LCON_PNONE | S3C2410_LCON_STOPB) +#define UFCON (S3C2410_UFCON_RXTRIG8 | S3C2410_UFCON_FIFOMODE) + +static struct s3c2410_uartcfg smdkc100_uartcfgs[] __initdata = { + [0] = { + .hwport = 0, + .flags = 0, + .ucon = 0x3c5, + .ulcon = 0x03, + .ufcon = 0x51, + }, + [1] = { + .hwport = 1, + .flags = 0, + .ucon = 0x3c5, + .ulcon = 0x03, + .ufcon = 0x51, + }, + [2] = { + .hwport = 2, + .flags = 0, + .ucon = 0x3c5, + .ulcon = 0x03, + .ufcon = 0x51, + }, + [3] = { + .hwport = 3, + .flags = 0, + .ucon = 0x3c5, + .ulcon = 0x03, + .ufcon = 0x51, + }, +}; + +static struct map_desc smdkc100_iodesc[] = {}; + +static struct platform_device *smdkc100_devices[] __initdata = { +}; + +static void __init smdkc100_map_io(void) +{ + s5pc1xx_init_io(smdkc100_iodesc, ARRAY_SIZE(smdkc100_iodesc)); + s3c24xx_init_clocks(12000000); + s3c24xx_init_uarts(smdkc100_uartcfgs, ARRAY_SIZE(smdkc100_uartcfgs)); +} + +static void __init smdkc100_machine_init(void) +{ + platform_add_devices(smdkc100_devices, ARRAY_SIZE(smdkc100_devices)); +} + +MACHINE_START(SMDKC100, "SMDKC100") + /* Maintainer: Byungho Min */ + .phys_io = S5PC1XX_PA_UART & 0xfff00000, + .io_pg_offst = (((u32)S5PC1XX_VA_UART) >> 18) & 0xfffc, + .boot_params = S5PC100_PA_SDRAM + 0x100, + + .init_irq = s5pc100_init_irq, + .map_io = smdkc100_map_io, + .init_machine = smdkc100_machine_init, + .timer = &s3c24xx_timer, +MACHINE_END -- cgit v1.2.3 From db616eb67604242c11bfbb331bb143bfe4a2e386 Mon Sep 17 00:00:00 2001 From: Ben Dooks Date: Sun, 16 Aug 2009 23:54:58 +0100 Subject: ARM: S3C: Add S3C_DEV_NAND Kconfig entry Currently the S5PC100 does not define S3C_PA_NAND, leaving the NAND device definitions in arch/arm/plat-s3c/dev-nand.c unbuildable. Add a KConfig entry to select whether this is built. As backwards compatibility, both the S3C24XX and S3C64XX define the new configuration in their main Kconfig files until better support for basing this selection on a per-machine basis can be sorted out. Signed-off-by: Ben Dooks --- arch/arm/plat-s3c/Kconfig | 5 +++++ arch/arm/plat-s3c/Makefile | 2 +- arch/arm/plat-s3c24xx/Kconfig | 1 + arch/arm/plat-s3c64xx/Kconfig | 1 + 4 files changed, 8 insertions(+), 1 deletion(-) diff --git a/arch/arm/plat-s3c/Kconfig b/arch/arm/plat-s3c/Kconfig index 935c7558469..8931c5f0e46 100644 --- a/arch/arm/plat-s3c/Kconfig +++ b/arch/arm/plat-s3c/Kconfig @@ -198,4 +198,9 @@ config S3C_DEV_USB_HSOTG help Compile in platform device definition for USB high-speed OtG +config S3C_DEV_NAND + bool + help + Compile in platform device definition for NAND controller + endif diff --git a/arch/arm/plat-s3c/Makefile b/arch/arm/plat-s3c/Makefile index f32d045e7e3..3c09109e9e8 100644 --- a/arch/arm/plat-s3c/Makefile +++ b/arch/arm/plat-s3c/Makefile @@ -41,4 +41,4 @@ obj-$(CONFIG_S3C_DEV_I2C1) += dev-i2c1.o obj-$(CONFIG_S3C_DEV_FB) += dev-fb.o obj-$(CONFIG_S3C_DEV_USB_HOST) += dev-usb.o obj-$(CONFIG_S3C_DEV_USB_HSOTG) += dev-usb-hsotg.o -obj-y += dev-nand.o +obj-$(CONFIG_S3C_DEV_NAND) += dev-nand.o diff --git a/arch/arm/plat-s3c24xx/Kconfig b/arch/arm/plat-s3c24xx/Kconfig index 2f914568359..9c7aca48964 100644 --- a/arch/arm/plat-s3c24xx/Kconfig +++ b/arch/arm/plat-s3c24xx/Kconfig @@ -10,6 +10,7 @@ config PLAT_S3C24XX default y select NO_IOPORT select ARCH_REQUIRE_GPIOLIB + select S3C_DEVICE_NAND help Base platform code for any Samsung S3C24XX device diff --git a/arch/arm/plat-s3c64xx/Kconfig b/arch/arm/plat-s3c64xx/Kconfig index 5ebd8b425a5..bcfa778614d 100644 --- a/arch/arm/plat-s3c64xx/Kconfig +++ b/arch/arm/plat-s3c64xx/Kconfig @@ -19,6 +19,7 @@ config PLAT_S3C64XX select S3C_GPIO_PULL_UPDOWN select S3C_GPIO_CFG_S3C24XX select S3C_GPIO_CFG_S3C64XX + select S3C_DEV_NAND select USB_ARCH_HAS_OHCI help Base platform code for any Samsung S3C64XX device -- cgit v1.2.3 From baa28e3530375e0bef2c53243634a1c78f5c02f3 Mon Sep 17 00:00:00 2001 From: Ben Dooks Date: Mon, 3 Aug 2009 15:11:29 +0100 Subject: ARM: Show FIQ in /proc/interrupts on CONFIG_FIQ The show_fiq_list() call in arch/arm/kernel/irq.c currently depends on CONFIG_ARCH_ACORN, but this is not the only architecture that supports the usage of FIQ. Change to calling this if CONFIG_FIQ is set (which is what arch/arm/kernel/fiq.c is built by). Signed-off-by: Ben Dooks Signed-off-by: Ben Dooks --- arch/arm/kernel/irq.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm/kernel/irq.c b/arch/arm/kernel/irq.c index b7c3490eaa2..c9a8619f385 100644 --- a/arch/arm/kernel/irq.c +++ b/arch/arm/kernel/irq.c @@ -86,7 +86,7 @@ int show_interrupts(struct seq_file *p, void *v) unlock: spin_unlock_irqrestore(&irq_desc[i].lock, flags); } else if (i == NR_IRQS) { -#ifdef CONFIG_ARCH_ACORN +#ifdef CONFIG_FIQ show_fiq_list(p, v); #endif #ifdef CONFIG_SMP -- cgit v1.2.3 From 54782674084ed9dc829050a8c18298db6847679d Mon Sep 17 00:00:00 2001 From: Simon Guinot Date: Tue, 23 Jun 2009 13:54:35 +0200 Subject: [ARM] orion5x: Add LaCie NAS 2Big Network support This patch add support for the 2Big Network LaCie boards. Signed-off-by: Simon Guinot Signed-off-by: Nicolas Pitre --- arch/arm/mach-orion5x/Kconfig | 7 + arch/arm/mach-orion5x/Makefile | 1 + arch/arm/mach-orion5x/net2big-setup.c | 431 ++++++++++++++++++++++++++++++++++ 3 files changed, 439 insertions(+) create mode 100644 arch/arm/mach-orion5x/net2big-setup.c diff --git a/arch/arm/mach-orion5x/Kconfig b/arch/arm/mach-orion5x/Kconfig index 5062b05b76b..c3d513cad5a 100644 --- a/arch/arm/mach-orion5x/Kconfig +++ b/arch/arm/mach-orion5x/Kconfig @@ -103,6 +103,13 @@ config MACH_BIGDISK Say 'Y' here if you want your kernel to support the LaCie Big Disk Network NAS. +config MACH_NET2BIG + bool "LaCie 2Big Network" + select I2C_BOARDINFO + help + Say 'Y' here if you want your kernel to support the + LaCie 2Big Network NAS. + config MACH_MSS2 bool "Maxtor Shared Storage II" help diff --git a/arch/arm/mach-orion5x/Makefile b/arch/arm/mach-orion5x/Makefile index 1db8a3a2708..89772fcd65c 100644 --- a/arch/arm/mach-orion5x/Makefile +++ b/arch/arm/mach-orion5x/Makefile @@ -14,6 +14,7 @@ obj-$(CONFIG_MACH_MV2120) += mv2120-setup.o obj-$(CONFIG_MACH_EDMINI_V2) += edmini_v2-setup.o obj-$(CONFIG_MACH_D2NET) += d2net-setup.o obj-$(CONFIG_MACH_BIGDISK) += d2net-setup.o +obj-$(CONFIG_MACH_NET2BIG) += net2big-setup.o obj-$(CONFIG_MACH_MSS2) += mss2-setup.o obj-$(CONFIG_MACH_WNR854T) += wnr854t-setup.o obj-$(CONFIG_MACH_RD88F5181L_GE) += rd88f5181l-ge-setup.o diff --git a/arch/arm/mach-orion5x/net2big-setup.c b/arch/arm/mach-orion5x/net2big-setup.c new file mode 100644 index 00000000000..7bd6283476f --- /dev/null +++ b/arch/arm/mach-orion5x/net2big-setup.c @@ -0,0 +1,431 @@ +/* + * arch/arm/mach-orion5x/net2big-setup.c + * + * LaCie 2Big Network NAS setup + * + * Copyright (C) 2009 Simon Guinot + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include "common.h" +#include "mpp.h" + +/***************************************************************************** + * LaCie 2Big Network Info + ****************************************************************************/ + +/* + * 512KB NOR flash Device bus boot chip select + */ + +#define NET2BIG_NOR_BOOT_BASE 0xfff80000 +#define NET2BIG_NOR_BOOT_SIZE SZ_512K + +/***************************************************************************** + * 512KB NOR Flash on Boot Device + ****************************************************************************/ + +/* + * TODO: Check write support on flash MX29LV400CBTC-70G + */ + +static struct mtd_partition net2big_partitions[] = { + { + .name = "Full512kb", + .size = MTDPART_SIZ_FULL, + .offset = 0x00000000, + .mask_flags = MTD_WRITEABLE, + }, +}; + +static struct physmap_flash_data net2big_nor_flash_data = { + .width = 1, + .parts = net2big_partitions, + .nr_parts = ARRAY_SIZE(net2big_partitions), +}; + +static struct resource net2big_nor_flash_resource = { + .flags = IORESOURCE_MEM, + .start = NET2BIG_NOR_BOOT_BASE, + .end = NET2BIG_NOR_BOOT_BASE + + NET2BIG_NOR_BOOT_SIZE - 1, +}; + +static struct platform_device net2big_nor_flash = { + .name = "physmap-flash", + .id = 0, + .dev = { + .platform_data = &net2big_nor_flash_data, + }, + .num_resources = 1, + .resource = &net2big_nor_flash_resource, +}; + +/***************************************************************************** + * Ethernet + ****************************************************************************/ + +static struct mv643xx_eth_platform_data net2big_eth_data = { + .phy_addr = MV643XX_ETH_PHY_ADDR(8), +}; + +/***************************************************************************** + * I2C devices + ****************************************************************************/ + +/* + * i2c addr | chip | description + * 0x32 | Ricoh 5C372b | RTC + * 0x50 | HT24LC08 | eeprom (1kB) + */ +static struct i2c_board_info __initdata net2big_i2c_devices[] = { + { + I2C_BOARD_INFO("rs5c372b", 0x32), + }, { + I2C_BOARD_INFO("24c08", 0x50), + }, +}; + +/***************************************************************************** + * SATA + ****************************************************************************/ + +static struct mv_sata_platform_data net2big_sata_data = { + .n_ports = 2, +}; + +#define NET2BIG_GPIO_SATA_POWER_REQ 19 +#define NET2BIG_GPIO_SATA0_POWER 23 +#define NET2BIG_GPIO_SATA1_POWER 25 + +static void __init net2big_sata_power_init(void) +{ + int err; + + /* Configure GPIOs over MPP max number. */ + orion_gpio_set_valid(NET2BIG_GPIO_SATA0_POWER, 1); + orion_gpio_set_valid(NET2BIG_GPIO_SATA1_POWER, 1); + + err = gpio_request(NET2BIG_GPIO_SATA0_POWER, "SATA0 power status"); + if (err == 0) { + err = gpio_direction_input(NET2BIG_GPIO_SATA0_POWER); + if (err) + gpio_free(NET2BIG_GPIO_SATA0_POWER); + } + if (err) { + pr_err("net2big: failed to setup SATA0 power GPIO\n"); + return; + } + + err = gpio_request(NET2BIG_GPIO_SATA1_POWER, "SATA1 power status"); + if (err == 0) { + err = gpio_direction_input(NET2BIG_GPIO_SATA1_POWER); + if (err) + gpio_free(NET2BIG_GPIO_SATA1_POWER); + } + if (err) { + pr_err("net2big: failed to setup SATA1 power GPIO\n"); + goto err_free_1; + } + + err = gpio_request(NET2BIG_GPIO_SATA_POWER_REQ, "SATA power request"); + if (err == 0) { + err = gpio_direction_output(NET2BIG_GPIO_SATA_POWER_REQ, 0); + if (err) + gpio_free(NET2BIG_GPIO_SATA_POWER_REQ); + } + if (err) { + pr_err("net2big: failed to setup SATA power request GPIO\n"); + goto err_free_2; + } + + if (gpio_get_value(NET2BIG_GPIO_SATA0_POWER) && + gpio_get_value(NET2BIG_GPIO_SATA1_POWER)) { + return; + } + + /* + * SATA power up on both disk is done by pulling high the CPLD power + * request line. The 300ms delay is related to the CPLD clock and is + * needed to be sure that the CPLD has take into account the low line + * status. + */ + msleep(300); + gpio_set_value(NET2BIG_GPIO_SATA_POWER_REQ, 1); + pr_info("net2big: power up SATA hard disks\n"); + + return; + +err_free_2: + gpio_free(NET2BIG_GPIO_SATA1_POWER); +err_free_1: + gpio_free(NET2BIG_GPIO_SATA0_POWER); + + return; +} + +/***************************************************************************** + * GPIO LEDs + ****************************************************************************/ + +/* + * The power front LEDs (blue and red) and SATA red LEDs are controlled via a + * single GPIO line and are compatible with the leds-gpio driver. + * + * The SATA blue LEDs have some hardware blink capabilities which are detailled + * in the following array: + * + * SATAx blue LED | SATAx activity | LED state + * | | + * 0 | 0 | blink (rate 300ms) + * 1 | 0 | off + * ? | 1 | on + * + * Notes: The blue and the red front LED's can't be on at the same time. + * Blue LED have priority. + */ + +#define NET2BIG_GPIO_PWR_RED_LED 6 +#define NET2BIG_GPIO_PWR_BLUE_LED 16 +#define NET2BIG_GPIO_PWR_LED_BLINK_STOP 7 + +#define NET2BIG_GPIO_SATA0_RED_LED 11 +#define NET2BIG_GPIO_SATA1_RED_LED 10 + +#define NET2BIG_GPIO_SATA0_BLUE_LED 17 +#define NET2BIG_GPIO_SATA1_BLUE_LED 13 + +static struct gpio_led net2big_leds[] = { + { + .name = "net2big:red:power", + .gpio = NET2BIG_GPIO_PWR_RED_LED, + }, + { + .name = "net2big:blue:power", + .gpio = NET2BIG_GPIO_PWR_BLUE_LED, + }, + { + .name = "net2big:red:sata0", + .gpio = NET2BIG_GPIO_SATA0_RED_LED, + }, + { + .name = "net2big:red:sata1", + .gpio = NET2BIG_GPIO_SATA1_RED_LED, + }, +}; + +static struct gpio_led_platform_data net2big_led_data = { + .num_leds = ARRAY_SIZE(net2big_leds), + .leds = net2big_leds, +}; + +static struct platform_device net2big_gpio_leds = { + .name = "leds-gpio", + .id = -1, + .dev = { + .platform_data = &net2big_led_data, + }, +}; + +static void __init net2big_gpio_leds_init(void) +{ + int err; + + /* Stop initial CPLD slow red/blue blinking on power LED. */ + err = gpio_request(NET2BIG_GPIO_PWR_LED_BLINK_STOP, + "Power LED blink stop"); + if (err == 0) { + err = gpio_direction_output(NET2BIG_GPIO_PWR_LED_BLINK_STOP, 1); + if (err) + gpio_free(NET2BIG_GPIO_PWR_LED_BLINK_STOP); + } + if (err) + pr_err("net2big: failed to setup power LED blink GPIO\n"); + + /* + * Configure SATA0 and SATA1 blue LEDs to blink in relation with the + * hard disk activity. + */ + err = gpio_request(NET2BIG_GPIO_SATA0_BLUE_LED, + "SATA0 blue LED control"); + if (err == 0) { + err = gpio_direction_output(NET2BIG_GPIO_SATA0_BLUE_LED, 1); + if (err) + gpio_free(NET2BIG_GPIO_SATA0_BLUE_LED); + } + if (err) + pr_err("net2big: failed to setup SATA0 blue LED GPIO\n"); + + err = gpio_request(NET2BIG_GPIO_SATA1_BLUE_LED, + "SATA1 blue LED control"); + if (err == 0) { + err = gpio_direction_output(NET2BIG_GPIO_SATA1_BLUE_LED, 1); + if (err) + gpio_free(NET2BIG_GPIO_SATA1_BLUE_LED); + } + if (err) + pr_err("net2big: failed to setup SATA1 blue LED GPIO\n"); + + platform_device_register(&net2big_gpio_leds); +} + +/**************************************************************************** + * GPIO keys + ****************************************************************************/ + +#define NET2BIG_GPIO_PUSH_BUTTON 18 +#define NET2BIG_GPIO_POWER_SWITCH_ON 8 +#define NET2BIG_GPIO_POWER_SWITCH_OFF 9 + +#define NET2BIG_SWITCH_POWER_ON 0x1 +#define NET2BIG_SWITCH_POWER_OFF 0x2 + +static struct gpio_keys_button net2big_buttons[] = { + { + .type = EV_SW, + .code = NET2BIG_SWITCH_POWER_OFF, + .gpio = NET2BIG_GPIO_POWER_SWITCH_OFF, + .desc = "Power rocker switch (auto|off)", + .active_low = 0, + }, + { + .type = EV_SW, + .code = NET2BIG_SWITCH_POWER_ON, + .gpio = NET2BIG_GPIO_POWER_SWITCH_ON, + .desc = "Power rocker switch (on|auto)", + .active_low = 0, + }, + { + .type = EV_KEY, + .code = KEY_POWER, + .gpio = NET2BIG_GPIO_PUSH_BUTTON, + .desc = "Front Push Button", + .active_low = 0, + }, +}; + +static struct gpio_keys_platform_data net2big_button_data = { + .buttons = net2big_buttons, + .nbuttons = ARRAY_SIZE(net2big_buttons), +}; + +static struct platform_device net2big_gpio_buttons = { + .name = "gpio-keys", + .id = -1, + .dev = { + .platform_data = &net2big_button_data, + }, +}; + +/***************************************************************************** + * General Setup + ****************************************************************************/ + +static struct orion5x_mpp_mode net2big_mpp_modes[] __initdata = { + { 0, MPP_GPIO }, /* Raid mode (bit 0) */ + { 1, MPP_GPIO }, /* USB port 2 fuse (0 = Fail, 1 = Ok) */ + { 2, MPP_GPIO }, /* Raid mode (bit 1) */ + { 3, MPP_GPIO }, /* Board ID (bit 0) */ + { 4, MPP_GPIO }, /* Fan activity (0 = Off, 1 = On) */ + { 5, MPP_GPIO }, /* Fan fail detection */ + { 6, MPP_GPIO }, /* Red front LED (0 = Off, 1 = On) */ + { 7, MPP_GPIO }, /* Disable initial blinking on front LED */ + { 8, MPP_GPIO }, /* Rear power switch (on|auto) */ + { 9, MPP_GPIO }, /* Rear power switch (auto|off) */ + { 10, MPP_GPIO }, /* SATA 1 red LED (0 = Off, 1 = On) */ + { 11, MPP_GPIO }, /* SATA 0 red LED (0 = Off, 1 = On) */ + { 12, MPP_GPIO }, /* Board ID (bit 1) */ + { 13, MPP_GPIO }, /* SATA 1 blue LED blink control */ + { 14, MPP_SATA_LED }, + { 15, MPP_SATA_LED }, + { 16, MPP_GPIO }, /* Blue front LED control */ + { 17, MPP_GPIO }, /* SATA 0 blue LED blink control */ + { 18, MPP_GPIO }, /* Front button (0 = Released, 1 = Pushed ) */ + { 19, MPP_GPIO }, /* SATA{0,1} power On/Off request */ + { -1 } + /* 22: USB port 1 fuse (0 = Fail, 1 = Ok) */ + /* 23: SATA 0 power status */ + /* 24: Board power off */ + /* 25: SATA 1 power status */ +}; + +#define NET2BIG_GPIO_POWER_OFF 24 + +static void net2big_power_off(void) +{ + gpio_set_value(NET2BIG_GPIO_POWER_OFF, 1); +} + +static void __init net2big_init(void) +{ + /* + * Setup basic Orion functions. Need to be called early. + */ + orion5x_init(); + + orion5x_mpp_conf(net2big_mpp_modes); + + /* + * Configure peripherals. + */ + orion5x_ehci0_init(); + orion5x_ehci1_init(); + orion5x_eth_init(&net2big_eth_data); + orion5x_i2c_init(); + orion5x_uart0_init(); + orion5x_xor_init(); + + net2big_sata_power_init(); + orion5x_sata_init(&net2big_sata_data); + + orion5x_setup_dev_boot_win(NET2BIG_NOR_BOOT_BASE, + NET2BIG_NOR_BOOT_SIZE); + platform_device_register(&net2big_nor_flash); + + platform_device_register(&net2big_gpio_buttons); + net2big_gpio_leds_init(); + + i2c_register_board_info(0, net2big_i2c_devices, + ARRAY_SIZE(net2big_i2c_devices)); + + orion_gpio_set_valid(NET2BIG_GPIO_POWER_OFF, 1); + + if (gpio_request(NET2BIG_GPIO_POWER_OFF, "power-off") == 0 && + gpio_direction_output(NET2BIG_GPIO_POWER_OFF, 0) == 0) + pm_power_off = net2big_power_off; + else + pr_err("net2big: failed to configure power-off GPIO\n"); + + pr_notice("net2big: Flash writing is not yet supported.\n"); +} + +/* Warning: LaCie use a wrong mach-type (0x20e=526) in their bootloader. */ +MACHINE_START(NET2BIG, "LaCie 2Big Network") + .phys_io = ORION5X_REGS_PHYS_BASE, + .io_pg_offst = ((ORION5X_REGS_VIRT_BASE) >> 18) & 0xFFFC, + .boot_params = 0x00000100, + .init_machine = net2big_init, + .map_io = orion5x_map_io, + .init_irq = orion5x_init_irq, + .timer = &orion5x_timer, + .fixup = tag_fixup_mem32, +MACHINE_END + -- cgit v1.2.3 From f17a1f06d2fa93f4825be572622eb02c4894db4e Mon Sep 17 00:00:00 2001 From: Linus Walleij Date: Tue, 4 Aug 2009 01:01:02 +0100 Subject: ARM: 5636/1: Move vendor enum to AMBA include This moves the primecell vendor enum definition inside vic.c out to linux/amba/bus.h where it belongs and replace any occurances of specific vendor ID:s with the respective enums instead. Signed-off-by: Linus Walleij Signed-off-by: Russell King --- arch/arm/common/vic.c | 12 ++++-------- drivers/mmc/host/mmci.c | 6 +++--- include/linux/amba/bus.h | 5 +++++ 3 files changed, 12 insertions(+), 11 deletions(-) diff --git a/arch/arm/common/vic.c b/arch/arm/common/vic.c index bc1f9ad61ff..920ced0b73c 100644 --- a/arch/arm/common/vic.c +++ b/arch/arm/common/vic.c @@ -22,6 +22,7 @@ #include #include #include +#include #include #include @@ -272,11 +273,6 @@ static struct irq_chip vic_chip = { static void vik_init_st(void __iomem *base, unsigned int irq_start, u32 vic_sources); -enum vic_vendor { - VENDOR_ARM = 0x41, - VENDOR_ST = 0x80, -}; - /** * vic_init - initialise a vectored interrupt controller * @base: iomem base address @@ -289,7 +285,7 @@ void __init vic_init(void __iomem *base, unsigned int irq_start, { unsigned int i; u32 cellid = 0; - enum vic_vendor vendor; + enum amba_vendor vendor; /* Identify which VIC cell this one is, by reading the ID */ for (i = 0; i < 4; i++) { @@ -301,13 +297,13 @@ void __init vic_init(void __iomem *base, unsigned int irq_start, base, cellid, vendor); switch(vendor) { - case VENDOR_ST: + case AMBA_VENDOR_ST: vik_init_st(base, irq_start, vic_sources); return; default: printk(KERN_WARNING "VIC: unknown vendor, continuing anyways\n"); /* fall through */ - case VENDOR_ARM: + case AMBA_VENDOR_ARM: break; } diff --git a/drivers/mmc/host/mmci.c b/drivers/mmc/host/mmci.c index e1aa8471ab1..d78b1e460d7 100644 --- a/drivers/mmc/host/mmci.c +++ b/drivers/mmc/host/mmci.c @@ -430,7 +430,7 @@ static void mmci_set_ios(struct mmc_host *mmc, struct mmc_ios *ios) clk = 255; host->cclk = host->mclk / (2 * (clk + 1)); } - if (host->hw_designer == 0x80) + if (host->hw_designer == AMBA_VENDOR_ST) clk |= MCI_FCEN; /* Bug fix in ST IP block */ clk |= MCI_CLK_ENABLE; } @@ -443,7 +443,7 @@ static void mmci_set_ios(struct mmc_host *mmc, struct mmc_ios *ios) break; case MMC_POWER_UP: /* The ST version does not have this, fall through to POWER_ON */ - if (host->hw_designer != 0x80) { + if (host->hw_designer != AMBA_VENDOR_ST) { pwr |= MCI_PWR_UP; break; } @@ -453,7 +453,7 @@ static void mmci_set_ios(struct mmc_host *mmc, struct mmc_ios *ios) } if (ios->bus_mode == MMC_BUSMODE_OPENDRAIN) { - if (host->hw_designer != 0x80) + if (host->hw_designer != AMBA_VENDOR_ST) pwr |= MCI_ROD; else { /* diff --git a/include/linux/amba/bus.h b/include/linux/amba/bus.h index 9b93cafa82a..ab94335b4bb 100644 --- a/include/linux/amba/bus.h +++ b/include/linux/amba/bus.h @@ -36,6 +36,11 @@ struct amba_driver { struct amba_id *id_table; }; +enum amba_vendor { + AMBA_VENDOR_ARM = 0x41, + AMBA_VENDOR_ST = 0x80, +}; + #define amba_get_drvdata(d) dev_get_drvdata(&d->dev) #define amba_set_drvdata(d,p) dev_set_drvdata(&d->dev, p) -- cgit v1.2.3