From e7d163f7666560c90b163907b9d96ec6207e0f6f Mon Sep 17 00:00:00 2001 From: Chris Zankel Date: Thu, 30 Jun 2005 02:58:59 -0700 Subject: [PATCH] xtensa: Removed local copy of zlib and fixed O= support Removed an unnecessary local copy of zlib (sorry for the add'l traffic). Fixed 'O=' support (thanks to Jan Dittmer for pointing it out). Some minor clean-ups in the make files. Signed-off-by: Chris Zankel Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- arch/xtensa/Makefile | 48 +- arch/xtensa/boot/Makefile | 10 +- arch/xtensa/boot/boot-elf/Makefile | 4 +- arch/xtensa/boot/boot-redboot/Makefile | 10 +- arch/xtensa/boot/include/zlib.h | 433 ------- arch/xtensa/boot/lib/Makefile | 13 +- arch/xtensa/boot/lib/memcpy.S | 36 - arch/xtensa/boot/lib/zlib.c | 2150 -------------------------------- arch/xtensa/boot/lib/zmem.c | 20 +- 9 files changed, 53 insertions(+), 2671 deletions(-) delete mode 100644 arch/xtensa/boot/include/zlib.h delete mode 100644 arch/xtensa/boot/lib/memcpy.S delete mode 100644 arch/xtensa/boot/lib/zlib.c diff --git a/arch/xtensa/Makefile b/arch/xtensa/Makefile index 4fa27453b1f..27847e4ffcb 100644 --- a/arch/xtensa/Makefile +++ b/arch/xtensa/Makefile @@ -21,23 +21,17 @@ export CPU # Platform configuration -platform-y := common platform-$(CONFIG_XTENSA_PLATFORM_XT2000) := xt2000 platform-$(CONFIG_XTENSA_PLATFORM_ISS) := iss PLATFORM = $(platform-y) export PLATFORM -#LDFLAGS_vmlinux := -T$(word 1,$(LINKSCRIPT)) -AFLAGS_vmlinux.lds.o := -Uxtensa -CPPFLAGS += -Iarch/xtensa -Iinclude/asm -mlongcalls -g -AFLAGS += -Iarch/xtensa -Iinclude/asm -CPP = $(CC) -E $(CFLAGS) +CPPFLAGS += $(if $(KBUILD_SRC),-I$(srctree)/include/asm-xtensa/) +CPPFLAGS += -Iinclude/asm +CFLAGS += -pipe -mlongcalls -cflags-y += -Iarch/xtensa -pipe -mlongcalls - - -KBUILD_DEFCONFIG := common_defconfig +KBUILD_DEFCONFIG := iss_defconfig # ramdisk/initrd support # You need a compressed ramdisk image, named ramdisk.gz in @@ -62,30 +56,36 @@ endif LIBGCC := $(shell $(CC) $(CFLAGS) -print-libgcc-file-name) head-y := arch/xtensa/kernel/head.o -core-y += arch/xtensa/kernel/ \ - arch/xtensa/mm/ arch/xtensa/platform-$(PLATFORM)/ +core-y += arch/xtensa/kernel/ arch/xtensa/mm/ +ifneq ($(PLATFORM),) +core-y += arch/xtensa/platform-$(PLATFORM)/ +endif libs-y += arch/xtensa/lib/ $(LIBGCC) -boot := arch/xtensa/boot +boot := arch/xtensa/boot + +archinc := include/asm-xtensa arch/xtensa/kernel/asm-offsets.s: \ - arch/xtensa/kernel/asm-offsets.c \ - include/asm-xtensa/.platform + arch/xtensa/kernel/asm-offsets.c $(archinc)/.platform include/asm-xtensa/offsets.h: arch/xtensa/kernel/asm-offsets.s $(call filechk,gen-asm-offsets) -prepare: include/asm-xtensa/.platform include/asm-xtensa/offsets.h +prepare: $(archinc)/.platform $(archinc)/offsets.h # Update machine cpu and platform symlinks if something which affects # them changed. -include/asm-xtensa/.platform: $(wildcard include/config/arch/*.h) - @echo ' Setting up cpu ($(CPU)) and platform ($(PLATFORM)) symlinks' - $(Q)rm -f include/asm-xtensa/platform - $(Q)rm -f include/asm-xtensa/xtensa/config - $(Q)(cd include/asm-xtensa/; ln -sf platform-$(PLATFORM) platform) - $(Q)(cd include/asm-xtensa/xtensa; ln -sf config-$(CPU) config) +$(archinc)/.platform: $(wildcard include/config/arch/*.h) include/config/MARKER + @echo ' SYMLINK $(archinc)/xtensa/config -> $(archinc)/xtensa/config-$(CPU)' + $(Q)mkdir -p $(archinc) + $(Q)mkdir -p $(archinc)/xtensa + $(Q)ln -fsn $(srctree)/$(archinc)/xtensa/config-$(CPU) $(archinc)/xtensa/config + @echo ' SYMLINK $(archinc)/platform -> $(archinc)/platform-$(PLATFORM)' + $(Q)ln -fsn $(srctree)/$(archinc)/platform-$(PLATFORM) $(archinc)/platform + @touch $@ + all: zImage @@ -94,7 +94,9 @@ bzImage : zImage zImage zImage.initrd: vmlinux $(Q)$(MAKE) $(build)=$(boot) $@ -CLEAN_FILES += arch/xtensa/vmlinux.lds include/asm-xtensa/offset.h +CLEAN_FILES += arch/xtensa/vmlinux.lds $(archinc)/offset.h \ + $(archinc)/platform $(archinc)/xtensa/config \ + $(archinc)/.platform define archhelp @echo '* zImage - Compressed kernel image (arch/xtensa/boot/images/zImage.*)' diff --git a/arch/xtensa/boot/Makefile b/arch/xtensa/boot/Makefile index 260f456ccf0..820b31d10ae 100644 --- a/arch/xtensa/boot/Makefile +++ b/arch/xtensa/boot/Makefile @@ -11,21 +11,19 @@ CFLAGS += -fno-builtin -Iarch/$(ARCH)/boot/include HOSTFLAGS += -Iarch/$(ARCH)/boot/include -BIG_ENDIAN := $(shell echo -e "\#ifdef __XTENSA_EL__\nint little;\n\#else\nint big;\n\#endif" | $(CC) -E -|grep -c big) - +BIG_ENDIAN := $(shell echo -e __XTENSA_EB__ | $(CC) -E - | grep -v "\#") export CFLAGS export AFLAGS export BIG_ENDIAN +subdir-y := lib + # Subdirs for the boot loader(s) bootdir-$(CONFIG_XTENSA_PLATFORM_ISS) += boot-elf bootdir-$(CONFIG_XTENSA_PLATFORM_XT2000) += boot-redboot boot-elf -subdir-y := lib/ - -subdir-y += boot-elf/ boot-redboot/ zImage zImage.initrd Image Image.initrd: $(bootdir-y) @@ -33,5 +31,3 @@ $(bootdir-y): $(addprefix $(obj)/,$(subdir-y)) \ $(addprefix $(obj)/,$(host-progs)) $(Q)$(MAKE) $(build)=$(obj)/$@ $(MAKECMDGOALS) - - diff --git a/arch/xtensa/boot/boot-elf/Makefile b/arch/xtensa/boot/boot-elf/Makefile index f6ef6a36966..734db7f7658 100644 --- a/arch/xtensa/boot/boot-elf/Makefile +++ b/arch/xtensa/boot/boot-elf/Makefile @@ -27,7 +27,7 @@ Image: vmlinux $(OBJS) --set-section-flags image=contents,alloc,load,load,data \ $(OBJS) $@.tmp $(LD) $(LDFLAGS) $(LDFLAGS_vmlinux) \ - -T arch/$(ARCH)/boot/boot-elf/boot.ld \ + -T $(srctree)/arch/$(ARCH)/boot/boot-elf/boot.ld \ -o arch/$(ARCH)/boot/$@.elf $@.tmp rm -f $@.tmp vmlinux.tmp @@ -41,7 +41,7 @@ Image.initrd: vmlinux $(OBJS) --set-section-flags image=contents,alloc,load,load,data \ $(OBJS) $@.tmp $(LD) $(LDFLAGS) $(LDFLAGS_vmlinux) \ - -T arch/$(ARCH)/boot/boot-elf/boot.ld \ + -T $(srctree)/arch/$(ARCH)/boot/boot-elf/boot.ld \ -o arch/$(ARCH)/boot/$@.elf $@.tmp rm -f $@.tmp vmlinux.tmp diff --git a/arch/xtensa/boot/boot-redboot/Makefile b/arch/xtensa/boot/boot-redboot/Makefile index ca8a68bc847..f53262c2e1f 100644 --- a/arch/xtensa/boot/boot-redboot/Makefile +++ b/arch/xtensa/boot/boot-redboot/Makefile @@ -12,24 +12,24 @@ else OBJCOPY_ARGS := -O elf32-xtensa-le endif -LD_ARGS = -T $(obj)/boot.ld +LD_ARGS = -T $(srctree)/$(obj)/boot.ld boot-y := bootstrap.o OBJS := $(addprefix $(obj)/,$(boot-y)) -LIBS := arch/$(ARCH)/boot/lib/lib.a arch/$(ARCH)/lib/lib.a +LIBS := arch/xtensa/boot/lib/lib.a arch/xtensa/lib/lib.a LIBGCC := $(shell $(CC) $(CFLAGS) -print-libgcc-file-name) zImage: vmlinux $(OBJS) $(LIBS) $(OBJCOPY) --strip-all -R .comment -R .xt.insn -O binary \ - $(TOPDIR)/vmlinux vmlinux.tmp + vmlinux vmlinux.tmp gzip -vf9 vmlinux.tmp $(OBJCOPY) $(OBJCOPY_ARGS) -R .comment \ --add-section image=vmlinux.tmp.gz \ --set-section-flags image=contents,alloc,load,load,data \ $(OBJS) $@.tmp $(LD) $(LD_ARGS) -o $@.elf $@.tmp $(LIBS) -L/xtensa-elf/lib $(LIBGCC) - $(OBJCOPY) -S -O binary $@.elf arch/$(ARCH)/boot/images/$@.redboot -# rm -f $@.tmp $@.elf vmlinux.tmp.gz + $(OBJCOPY) -S -O binary $@.elf arch/$(ARCH)/boot/$@.redboot + rm -f $@.tmp $@.elf vmlinux.tmp.gz diff --git a/arch/xtensa/boot/include/zlib.h b/arch/xtensa/boot/include/zlib.h deleted file mode 100644 index ea29b623785..00000000000 --- a/arch/xtensa/boot/include/zlib.h +++ /dev/null @@ -1,433 +0,0 @@ -/* - * BK Id: SCCS/s.zlib.h 1.8 05/18/01 15:17:23 cort - */ -/* - * This file is derived from zlib.h and zconf.h from the zlib-0.95 - * distribution by Jean-loup Gailly and Mark Adler, with some additions - * by Paul Mackerras to aid in implementing Deflate compression and - * decompression for PPP packets. - */ - -/* - * ==FILEVERSION 960122== - * - * This marker is used by the Linux installation script to determine - * whether an up-to-date version of this file is already installed. - */ - -/* zlib.h -- interface of the 'zlib' general purpose compression library - version 0.95, Aug 16th, 1995. - - Copyright (C) 1995 Jean-loup Gailly and Mark Adler - - This software is provided 'as-is', without any express or implied - warranty. In no event will the authors be held liable for any damages - arising from the use of this software. - - Permission is granted to anyone to use this software for any purpose, - including commercial applications, and to alter it and redistribute it - freely, subject to the following restrictions: - - 1. The origin of this software must not be misrepresented; you must not - claim that you wrote the original software. If you use this software - in a product, an acknowledgment in the product documentation would be - appreciated but is not required. - 2. Altered source versions must be plainly marked as such, and must not be - misrepresented as being the original software. - 3. This notice may not be removed or altered from any source distribution. - - Jean-loup Gailly Mark Adler - gzip@prep.ai.mit.edu madler@alumni.caltech.edu - */ - -#ifndef _ZLIB_H -#define _ZLIB_H - -/* #include "zconf.h" */ /* included directly here */ - -/* zconf.h -- configuration of the zlib compression library - * Copyright (C) 1995 Jean-loup Gailly. - * For conditions of distribution and use, see copyright notice in zlib.h - */ - -/* From: zconf.h,v 1.12 1995/05/03 17:27:12 jloup Exp */ - -/* - The library does not install any signal handler. It is recommended to - add at least a handler for SIGSEGV when decompressing; the library checks - the consistency of the input data whenever possible but may go nuts - for some forms of corrupted input. - */ - -/* - * Compile with -DMAXSEG_64K if the alloc function cannot allocate more - * than 64k bytes at a time (needed on systems with 16-bit int). - * Compile with -DUNALIGNED_OK if it is OK to access shorts or ints - * at addresses which are not a multiple of their size. - * Under DOS, -DFAR=far or -DFAR=__far may be needed. - */ - -#ifndef STDC -# if defined(MSDOS) || defined(__STDC__) || defined(__cplusplus) -# define STDC -# endif -#endif - -#ifdef __MWERKS__ /* Metrowerks CodeWarrior declares fileno() in unix.h */ -# include -#endif - -/* Maximum value for memLevel in deflateInit2 */ -#ifndef MAX_MEM_LEVEL -# ifdef MAXSEG_64K -# define MAX_MEM_LEVEL 8 -# else -# define MAX_MEM_LEVEL 9 -# endif -#endif - -#ifndef FAR -# define FAR -#endif - -/* Maximum value for windowBits in deflateInit2 and inflateInit2 */ -#ifndef MAX_WBITS -# define MAX_WBITS 15 /* 32K LZ77 window */ -#endif - -/* The memory requirements for deflate are (in bytes): - 1 << (windowBits+2) + 1 << (memLevel+9) - that is: 128K for windowBits=15 + 128K for memLevel = 8 (default values) - plus a few kilobytes for small objects. For example, if you want to reduce - the default memory requirements from 256K to 128K, compile with - make CFLAGS="-O -DMAX_WBITS=14 -DMAX_MEM_LEVEL=7" - Of course this will generally degrade compression (there's no free lunch). - - The memory requirements for inflate are (in bytes) 1 << windowBits - that is, 32K for windowBits=15 (default value) plus a few kilobytes - for small objects. -*/ - - /* Type declarations */ - -#ifndef OF /* function prototypes */ -# ifdef STDC -# define OF(args) args -# else -# define OF(args) () -# endif -#endif - -typedef unsigned char Byte; /* 8 bits */ -typedef unsigned int uInt; /* 16 bits or more */ -typedef unsigned long uLong; /* 32 bits or more */ - -typedef Byte FAR Bytef; -typedef char FAR charf; -typedef int FAR intf; -typedef uInt FAR uIntf; -typedef uLong FAR uLongf; - -#ifdef STDC - typedef void FAR *voidpf; - typedef void *voidp; -#else - typedef Byte FAR *voidpf; - typedef Byte *voidp; -#endif - -/* end of original zconf.h */ - -#define ZLIB_VERSION "0.95P" - -/* - The 'zlib' compression library provides in-memory compression and - decompression functions, including integrity checks of the uncompressed - data. This version of the library supports only one compression method - (deflation) but other algorithms may be added later and will have the same - stream interface. - - For compression the application must provide the output buffer and - may optionally provide the input buffer for optimization. For decompression, - the application must provide the input buffer and may optionally provide - the output buffer for optimization. - - Compression can be done in a single step if the buffers are large - enough (for example if an input file is mmap'ed), or can be done by - repeated calls of the compression function. In the latter case, the - application must provide more input and/or consume the output - (providing more output space) before each call. -*/ - -typedef voidpf (*alloc_func) OF((voidpf opaque, uInt items, uInt size)); -typedef void (*free_func) OF((voidpf opaque, voidpf address, uInt nbytes)); - -struct internal_state; - -typedef struct z_stream_s { - Bytef *next_in; /* next input byte */ - uInt avail_in; /* number of bytes available at next_in */ - uLong total_in; /* total nb of input bytes read so far */ - - Bytef *next_out; /* next output byte should be put there */ - uInt avail_out; /* remaining free space at next_out */ - uLong total_out; /* total nb of bytes output so far */ - - char *msg; /* last error message, NULL if no error */ - struct internal_state FAR *state; /* not visible by applications */ - - alloc_func zalloc; /* used to allocate the internal state */ - free_func zfree; /* used to free the internal state */ - voidp opaque; /* private data object passed to zalloc and zfree */ - - Byte data_type; /* best guess about the data type: ascii or binary */ - -} z_stream; - -/* - The application must update next_in and avail_in when avail_in has - dropped to zero. It must update next_out and avail_out when avail_out - has dropped to zero. The application must initialize zalloc, zfree and - opaque before calling the init function. All other fields are set by the - compression library and must not be updated by the application. - - The opaque value provided by the application will be passed as the first - parameter for calls of zalloc and zfree. This can be useful for custom - memory management. The compression library attaches no meaning to the - opaque value. - - zalloc must return Z_NULL if there is not enough memory for the object. - On 16-bit systems, the functions zalloc and zfree must be able to allocate - exactly 65536 bytes, but will not be required to allocate more than this - if the symbol MAXSEG_64K is defined (see zconf.h). WARNING: On MSDOS, - pointers returned by zalloc for objects of exactly 65536 bytes *must* - have their offset normalized to zero. The default allocation function - provided by this library ensures this (see zutil.c). To reduce memory - requirements and avoid any allocation of 64K objects, at the expense of - compression ratio, compile the library with -DMAX_WBITS=14 (see zconf.h). - - The fields total_in and total_out can be used for statistics or - progress reports. After compression, total_in holds the total size of - the uncompressed data and may be saved for use in the decompressor - (particularly if the decompressor wants to decompress everything in - a single step). -*/ - - /* constants */ - -#define Z_NO_FLUSH 0 -#define Z_PARTIAL_FLUSH 1 -#define Z_FULL_FLUSH 2 -#define Z_SYNC_FLUSH 3 /* experimental: partial_flush + byte align */ -#define Z_FINISH 4 -#define Z_PACKET_FLUSH 5 -/* See deflate() below for the usage of these constants */ - -#define Z_OK 0 -#define Z_STREAM_END 1 -#define Z_ERRNO (-1) -#define Z_STREAM_ERROR (-2) -#define Z_DATA_ERROR (-3) -#define Z_MEM_ERROR (-4) -#define Z_BUF_ERROR (-5) -/* error codes for the compression/decompression functions */ - -#define Z_BEST_SPEED 1 -#define Z_BEST_COMPRESSION 9 -#define Z_DEFAULT_COMPRESSION (-1) -/* compression levels */ - -#define Z_FILTERED 1 -#define Z_HUFFMAN_ONLY 2 -#define Z_DEFAULT_STRATEGY 0 - -#define Z_BINARY 0 -#define Z_ASCII 1 -#define Z_UNKNOWN 2 -/* Used to set the data_type field */ - -#define Z_NULL 0 /* for initializing zalloc, zfree, opaque */ - -extern char *zlib_version; -/* The application can compare zlib_version and ZLIB_VERSION for consistency. - If the first character differs, the library code actually used is - not compatible with the zlib.h header file used by the application. - */ - - /* basic functions */ - -extern int inflateInit OF((z_stream *strm)); -/* - Initializes the internal stream state for decompression. The fields - zalloc and zfree must be initialized before by the caller. If zalloc and - zfree are set to Z_NULL, inflateInit updates them to use default allocation - functions. - - inflateInit returns Z_OK if success, Z_MEM_ERROR if there was not - enough memory. msg is set to null if there is no error message. - inflateInit does not perform any decompression: this will be done by - inflate(). -*/ - - -extern int inflate OF((z_stream *strm, int flush)); -/* - Performs one or both of the following actions: - - - Decompress more input starting at next_in and update next_in and avail_in - accordingly. If not all input can be processed (because there is not - enough room in the output buffer), next_in is updated and processing - will resume at this point for the next call of inflate(). - - - Provide more output starting at next_out and update next_out and avail_out - accordingly. inflate() always provides as much output as possible - (until there is no more input data or no more space in the output buffer). - - Before the call of inflate(), the application should ensure that at least - one of the actions is possible, by providing more input and/or consuming - more output, and updating the next_* and avail_* values accordingly. - The application can consume the uncompressed output when it wants, for - example when the output buffer is full (avail_out == 0), or after each - call of inflate(). - - If the parameter flush is set to Z_PARTIAL_FLUSH or Z_PACKET_FLUSH, - inflate flushes as much output as possible to the output buffer. The - flushing behavior of inflate is not specified for values of the flush - parameter other than Z_PARTIAL_FLUSH, Z_PACKET_FLUSH or Z_FINISH, but the - current implementation actually flushes as much output as possible - anyway. For Z_PACKET_FLUSH, inflate checks that once all the input data - has been consumed, it is expecting to see the length field of a stored - block; if not, it returns Z_DATA_ERROR. - - inflate() should normally be called until it returns Z_STREAM_END or an - error. However if all decompression is to be performed in a single step - (a single call of inflate), the parameter flush should be set to - Z_FINISH. In this case all pending input is processed and all pending - output is flushed; avail_out must be large enough to hold all the - uncompressed data. (The size of the uncompressed data may have been saved - by the compressor for this purpose.) The next operation on this stream must - be inflateEnd to deallocate the decompression state. The use of Z_FINISH - is never required, but can be used to inform inflate that a faster routine - may be used for the single inflate() call. - - inflate() returns Z_OK if some progress has been made (more input - processed or more output produced), Z_STREAM_END if the end of the - compressed data has been reached and all uncompressed output has been - produced, Z_DATA_ERROR if the input data was corrupted, Z_STREAM_ERROR if - the stream structure was inconsistent (for example if next_in or next_out - was NULL), Z_MEM_ERROR if there was not enough memory, Z_BUF_ERROR if no - progress is possible or if there was not enough room in the output buffer - when Z_FINISH is used. In the Z_DATA_ERROR case, the application may then - call inflateSync to look for a good compression block. */ - - -extern int inflateEnd OF((z_stream *strm)); -/* - All dynamically allocated data structures for this stream are freed. - This function discards any unprocessed input and does not flush any - pending output. - - inflateEnd returns Z_OK if success, Z_STREAM_ERROR if the stream state - was inconsistent. In the error case, msg may be set but then points to a - static string (which must not be deallocated). -*/ - - /* advanced functions */ - -extern int inflateInit2 OF((z_stream *strm, - int windowBits)); -/* - This is another version of inflateInit with more compression options. The - fields next_out, zalloc and zfree must be initialized before by the caller. - - The windowBits parameter is the base two logarithm of the maximum window - size (the size of the history buffer). It should be in the range 8..15 for - this version of the library (the value 16 will be allowed soon). The - default value is 15 if inflateInit is used instead. If a compressed stream - with a larger window size is given as input, inflate() will return with - the error code Z_DATA_ERROR instead of trying to allocate a larger window. - - If next_out is not null, the library will use this buffer for the history - buffer; the buffer must either be large enough to hold the entire output - data, or have at least 1< $@ + +$(addprefix $(obj)/,$(zlib)): $(obj)/%: $(srctree)/lib/zlib_inflate/% + $(call cmd,copy_zlib) + +clean-files := $(zlib) diff --git a/arch/xtensa/boot/lib/memcpy.S b/arch/xtensa/boot/lib/memcpy.S deleted file mode 100644 index a029f5df2d5..00000000000 --- a/arch/xtensa/boot/lib/memcpy.S +++ /dev/null @@ -1,36 +0,0 @@ -/* - * arch/xtensa/lib/memcpy.S - * - * ANSI C standard library function memcpy - * - * This file is subject to the terms and conditions of the GNU General - * Public License. See the file "COPYING" in the main directory of - * this archive for more details. - * - * Copyright (C) 2002 Tensilica Inc. - */ - -#define _ASMLANGUAGE -#include - -.text -.align 4 -.global bcopy -.type bcopy,@function -bcopy: - movi a14, xthal_bcopy // a14 safe to use regardless of whether caller - // used call4 or call8 (can't have used call12) - jx a14 // let the Core HAL do the work - -.text -.align 4 -.global memcpy -.type memcpy,@function -memcpy: -.global memmove -.type memmove,@function -memmove: - movi a14, xthal_memcpy // a14 safe to use regardless of whether caller - // used call4 or call8 (can't have used call12) - jx a14 // let the Core HAL do the work - diff --git a/arch/xtensa/boot/lib/zlib.c b/arch/xtensa/boot/lib/zlib.c deleted file mode 100644 index e3859f63107..00000000000 --- a/arch/xtensa/boot/lib/zlib.c +++ /dev/null @@ -1,2150 +0,0 @@ -/* - * BK Id: SCCS/s.zlib.c 1.8 05/18/01 15:17:24 cort - */ -/* - * This file is derived from various .h and .c files from the zlib-0.95 - * distribution by Jean-loup Gailly and Mark Adler, with some additions - * by Paul Mackerras to aid in implementing Deflate compression and - * decompression for PPP packets. See zlib.h for conditions of - * distribution and use. - * - * Changes that have been made include: - * - changed functions not used outside this file to "local" - * - added minCompression parameter to deflateInit2 - * - added Z_PACKET_FLUSH (see zlib.h for details) - * - added inflateIncomp - * - */ - -/*+++++*/ -/* zutil.h -- internal interface and configuration of the compression library - * Copyright (C) 1995 Jean-loup Gailly. - * For conditions of distribution and use, see copyright notice in zlib.h - */ - -/* WARNING: this file should *not* be used by applications. It is - part of the implementation of the compression library and is - subject to change. Applications should only use zlib.h. - */ - -/* From: zutil.h,v 1.9 1995/05/03 17:27:12 jloup Exp */ - -#define _Z_UTIL_H - -#include "zlib.h" - -#ifndef local -# define local static -#endif -/* compile with -Dlocal if your debugger can't find static symbols */ - -#define FAR - -typedef unsigned char uch; -typedef uch FAR uchf; -typedef unsigned short ush; -typedef ush FAR ushf; -typedef unsigned long ulg; - -extern char *z_errmsg[]; /* indexed by 1-zlib_error */ - -#define ERR_RETURN(strm,err) return (strm->msg=z_errmsg[1-err], err) -/* To be used only when the state is known to be valid */ - -#ifndef NULL -#define NULL ((void *) 0) -#endif - - /* common constants */ - -#define DEFLATED 8 - -#ifndef DEF_WBITS -# define DEF_WBITS MAX_WBITS -#endif -/* default windowBits for decompression. MAX_WBITS is for compression only */ - -#if MAX_MEM_LEVEL >= 8 -# define DEF_MEM_LEVEL 8 -#else -# define DEF_MEM_LEVEL MAX_MEM_LEVEL -#endif -/* default memLevel */ - -#define STORED_BLOCK 0 -#define STATIC_TREES 1 -#define DYN_TREES 2 -/* The three kinds of block type */ - -#define MIN_MATCH 3 -#define MAX_MATCH 258 -/* The minimum and maximum match lengths */ - - /* functions */ - -#include -#define zmemcpy memcpy -#define zmemzero(dest, len) memset(dest, 0, len) - -/* Diagnostic functions */ -#ifdef DEBUG_ZLIB -# include -# ifndef verbose -# define verbose 0 -# endif -# define Assert(cond,msg) {if(!(cond)) z_error(msg);} -# define Trace(x) fprintf x -# define Tracev(x) {if (verbose) fprintf x ;} -# define Tracevv(x) {if (verbose>1) fprintf x ;} -# define Tracec(c,x) {if (verbose && (c)) fprintf x ;} -# define Tracecv(c,x) {if (verbose>1 && (c)) fprintf x ;} -#else -# define Assert(cond,msg) -# define Trace(x) -# define Tracev(x) -# define Tracevv(x) -# define Tracec(c,x) -# define Tracecv(c,x) -#endif - - -typedef uLong (*check_func) OF((uLong check, Bytef *buf, uInt len)); - -/* voidpf zcalloc OF((voidpf opaque, unsigned items, unsigned size)); */ -/* void zcfree OF((voidpf opaque, voidpf ptr)); */ - -#define ZALLOC(strm, items, size) \ - (*((strm)->zalloc))((strm)->opaque, (items), (size)) -#define ZFREE(strm, addr, size) \ - (*((strm)->zfree))((strm)->opaque, (voidpf)(addr), (size)) -#define TRY_FREE(s, p, n) {if (p) ZFREE(s, p, n);} - -/* deflate.h -- internal compression state - * Copyright (C) 1995 Jean-loup Gailly - * For conditions of distribution and use, see copyright notice in zlib.h - */ - -/* WARNING: this file should *not* be used by applications. It is - part of the implementation of the compression library and is - subject to change. Applications should only use zlib.h. - */ - -/*+++++*/ -/* infblock.h -- header to use infblock.c - * Copyright (C) 1995 Mark Adler - * For conditions of distribution and use, see copyright notice in zlib.h - */ - -/* WARNING: this file should *not* be used by applications. It is - part of the implementation of the compression library and is - subject to change. Applications should only use zlib.h. - */ - -struct inflate_blocks_state; -typedef struct inflate_blocks_state FAR inflate_blocks_statef; - -local inflate_blocks_statef * inflate_blocks_new OF(( - z_stream *z, - check_func c, /* check function */ - uInt w)); /* window size */ - -local int inflate_blocks OF(( - inflate_blocks_statef *, - z_stream *, - int)); /* initial return code */ - -local void inflate_blocks_reset OF(( - inflate_blocks_statef *, - z_stream *, - uLongf *)); /* check value on output */ - -local int inflate_blocks_free OF(( - inflate_blocks_statef *, - z_stream *, - uLongf *)); /* check value on output */ - -local int inflate_addhistory OF(( - inflate_blocks_statef *, - z_stream *)); - -local int inflate_packet_flush OF(( - inflate_blocks_statef *)); - -/*+++++*/ -/* inftrees.h -- header to use inftrees.c - * Copyright (C) 1995 Mark Adler - * For conditions of distribution and use, see copyright notice in zlib.h - */ - -/* WARNING: this file should *not* be used by applications. It is - part of the implementation of the compression library and is - subject to change. Applications should only use zlib.h. - */ - -/* Huffman code lookup table entry--this entry is four bytes for machines - that have 16-bit pointers (e.g. PC's in the small or medium model). */ - -typedef struct inflate_huft_s FAR inflate_huft; - -struct inflate_huft_s { - union { - struct { - Byte Exop; /* number of extra bits or operation */ - Byte Bits; /* number of bits in this code or subcode */ - } what; - uInt Nalloc; /* number of these allocated here */ - Bytef *pad; /* pad structure to a power of 2 (4 bytes for */ - } word; /* 16-bit, 8 bytes for 32-bit machines) */ - union { - uInt Base; /* literal, length base, or distance base */ - inflate_huft *Next; /* pointer to next level of table */ - } more; -}; - -#ifdef DEBUG_ZLIB - local uInt inflate_hufts; -#endif - -local int inflate_trees_bits OF(( - uIntf *, /* 19 code lengths */ - uIntf *, /* bits tree desired/actual depth */ - inflate_huft * FAR *, /* bits tree result */ - z_stream *)); /* for zalloc, zfree functions */ - -local int inflate_trees_dynamic OF(( - uInt, /* number of literal/length codes */ - uInt, /* number of distance codes */ - uIntf *, /* that many (total) code lengths */ - uIntf *, /* literal desired/actual bit depth */ - uIntf *, /* distance desired/actual bit depth */ - inflate_huft * FAR *, /* literal/length tree result */ - inflate_huft * FAR *, /* distance tree result */ - z_stream *)); /* for zalloc, zfree functions */ - -local int inflate_trees_fixed OF(( - uIntf *, /* literal desired/actual bit depth */ - uIntf *, /* distance desired/actual bit depth */ - inflate_huft * FAR *, /* literal/length tree result */ - inflate_huft * FAR *)); /* distance tree result */ - -local int inflate_trees_free OF(( - inflate_huft *, /* tables to free */ - z_stream *)); /* for zfree function */ - - -/*+++++*/ -/* infcodes.h -- header to use infcodes.c - * Copyright (C) 1995 Mark Adler - * For conditions of distribution and use, see copyright notice in zlib.h - */ - -/* WARNING: this file should *not* be used by applications. It is - part of the implementation of the compression library and is - subject to change. Applications should only use zlib.h. - */ - -struct inflate_codes_state; -typedef struct inflate_codes_state FAR inflate_codes_statef; - -local inflate_codes_statef *inflate_codes_new OF(( - uInt, uInt, - inflate_huft *, inflate_huft *, - z_stream *)); - -local int inflate_codes OF(( - inflate_blocks_statef *, - z_stream *, - int)); - -local void inflate_codes_free OF(( - inflate_codes_statef *, - z_stream *)); - - -/*+++++*/ -/* inflate.c -- zlib interface to inflate modules - * Copyright (C) 1995 Mark Adler - * For conditions of distribution and use, see copyright notice in zlib.h - */ - -/* inflate private state */ -struct internal_state { - - /* mode */ - enum { - METHOD, /* waiting for method byte */ - FLAG, /* waiting for flag byte */ - BLOCKS, /* decompressing blocks */ - CHECK4, /* four check bytes to go */ - CHECK3, /* three check bytes to go */ - CHECK2, /* two check bytes to go */ - CHECK1, /* one check byte to go */ - DONE, /* finished check, done */ - BAD} /* got an error--stay here */ - mode; /* current inflate mode */ - - /* mode dependent information */ - union { - uInt method; /* if FLAGS, method byte */ - struct { - uLong was; /* computed check value */ - uLong need; /* stream check value */ - } check; /* if CHECK, check values to compare */ - uInt marker; /* if BAD, inflateSync's marker bytes count */ - } sub; /* submode */ - - /* mode independent information */ - int nowrap; /* flag for no wrapper */ - uInt wbits; /* log2(window size) (8..15, defaults to 15) */ - inflate_blocks_statef - *blocks; /* current inflate_blocks state */ - -}; - - -int inflateReset(z) -z_stream *z; -{ - uLong c; - - if (z == Z_NULL || z->state == Z_NULL) - return Z_STREAM_ERROR; - z->total_in = z->total_out = 0; - z->msg = Z_NULL; - z->state->mode = z->state->nowrap ? BLOCKS : METHOD; - inflate_blocks_reset(z->state->blocks, z, &c); - Trace((stderr, "inflate: reset\n")); - return Z_OK; -} - - -int inflateEnd(z) -z_stream *z; -{ - uLong c; - - if (z == Z_NULL || z->state == Z_NULL || z->zfree == Z_NULL) - return Z_STREAM_ERROR; - if (z->state->blocks != Z_NULL) - inflate_blocks_free(z->state->blocks, z, &c); - ZFREE(z, z->state, sizeof(struct internal_state)); - z->state = Z_NULL; - Trace((stderr, "inflate: end\n")); - return Z_OK; -} - - -int inflateInit2(z, w) -z_stream *z; -int w; -{ - /* initialize state */ - if (z == Z_NULL) - return Z_STREAM_ERROR; -/* if (z->zalloc == Z_NULL) z->zalloc = zcalloc; */ -/* if (z->zfree == Z_NULL) z->zfree = zcfree; */ - if ((z->state = (struct internal_state FAR *) - ZALLOC(z,1,sizeof(struct internal_state))) == Z_NULL) - return Z_MEM_ERROR; - z->state->blocks = Z_NULL; - - /* handle undocumented nowrap option (no zlib header or check) */ - z->state->nowrap = 0; - if (w < 0) - { - w = - w; - z->state->nowrap = 1; - } - - /* set window size */ - if (w < 8 || w > 15) - { - inflateEnd(z); - return Z_STREAM_ERROR; - } - z->state->wbits = (uInt)w; - - /* create inflate_blocks state */ - if ((z->state->blocks = - inflate_blocks_new(z, z->state->nowrap ? Z_NULL : adler32, 1 << w)) - == Z_NULL) - { - inflateEnd(z); - return Z_MEM_ERROR; - } - Trace((stderr, "inflate: allocated\n")); - - /* reset state */ - inflateReset(z); - return Z_OK; -} - - -int inflateInit(z) -z_stream *z; -{ - return inflateInit2(z, DEF_WBITS); -} - - -#define NEEDBYTE {if(z->avail_in==0)goto empty;r=Z_OK;} -#define NEXTBYTE (z->avail_in--,z->total_in++,*z->next_in++) - -int inflate(z, f) -z_stream *z; -int f; -{ - int r; - uInt b; - - if (z == Z_NULL || z->next_in == Z_NULL) - return Z_STREAM_ERROR; - r = Z_BUF_ERROR; - while (1) switch (z->state->mode) - { - case METHOD: - NEEDBYTE - if (((z->state->sub.method = NEXTBYTE) & 0xf) != DEFLATED) - { - z->state->mode = BAD; - z->msg = "unknown compression method"; - z->state->sub.marker = 5; /* can't try inflateSync */ - break; - } - if ((z->state->sub.method >> 4) + 8 > z->state->wbits) - { - z->state->mode = BAD; - z->msg = "invalid window size"; - z->state->sub.marker = 5; /* can't try inflateSync */ - break; - } - z->state->mode = FLAG; - case FLAG: - NEEDBYTE - if ((b = NEXTBYTE) & 0x20) - { - z->state->mode = BAD; - z->msg = "invalid reserved bit"; - z->state->sub.marker = 5; /* can't try inflateSync */ - break; - } - if (((z->state->sub.method << 8) + b) % 31) - { - z->state->mode = BAD; - z->msg = "incorrect header check"; - z->state->sub.marker = 5; /* can't try inflateSync */ - break; - } - Trace((stderr, "inflate: zlib header ok\n")); - z->state->mode = BLOCKS; - case BLOCKS: - r = inflate_blocks(z->state->blocks, z, r); - if (f == Z_PACKET_FLUSH && z->avail_in == 0 && z->avail_out != 0) - r = inflate_packet_flush(z->state->blocks); - if (r == Z_DATA_ERROR) - { - z->state->mode = BAD; - z->state->sub.marker = 0; /* can try inflateSync */ - break; - } - if (r != Z_STREAM_END) - return r; - r = Z_OK; - inflate_blocks_reset(z->state->blocks, z, &z->state->sub.check.was); - if (z->state->nowrap) - { - z->state->mode = DONE; - break; - } - z->state->mode = CHECK4; - case CHECK4: - NEEDBYTE - z->state->sub.check.need = (uLong)NEXTBYTE << 24; - z->state->mode = CHECK3; - case CHECK3: - NEEDBYTE - z->state->sub.check.need += (uLong)NEXTBYTE << 16; - z->state->mode = CHECK2; - case CHECK2: - NEEDBYTE - z->state->sub.check.need += (uLong)NEXTBYTE << 8; - z->state->mode = CHECK1; - case CHECK1: - NEEDBYTE - z->state->sub.check.need += (uLong)NEXTBYTE; - - if (z->state->sub.check.was != z->state->sub.check.need) - { - z->state->mode = BAD; - z->msg = "incorrect data check"; - z->state->sub.marker = 5; /* can't try inflateSync */ - break; - } - Trace((stderr, "inflate: zlib check ok\n")); - z->state->mode = DONE; - case DONE: - return Z_STREAM_END; - case BAD: - return Z_DATA_ERROR; - default: - return Z_STREAM_ERROR; - } - - empty: - if (f != Z_PACKET_FLUSH) - return r; - z->state->mode = BAD; - z->state->sub.marker = 0; /* can try inflateSync */ - return Z_DATA_ERROR; -} - -/* - * This subroutine adds the data at next_in/avail_in to the output history - * without performing any output. The output buffer must be "caught up"; - * i.e. no pending output (hence s->read equals s->write), and the state must - * be BLOCKS (i.e. we should be willing to see the start of a series of - * BLOCKS). On exit, the output will also be caught up, and the checksum - * will have been updated if need be. - */ - -int inflateIncomp(z) -z_stream *z; -{ - if (z->state->mode != BLOCKS) - return Z_DATA_ERROR; - return inflate_addhistory(z->state->blocks, z); -} - - -int inflateSync(z) -z_stream *z; -{ - uInt n; /* number of bytes to look at */ - Bytef *p; /* pointer to bytes */ - uInt m; /* number of marker bytes found in a row */ - uLong r, w; /* temporaries to save total_in and total_out */ - - /* set up */ - if (z == Z_NULL || z->state == Z_NULL) - return Z_STREAM_ERROR; - if (z->state->mode != BAD) - { - z->state->mode = BAD; - z->state->sub.marker = 0; - } - if ((n = z->avail_in) == 0) - return Z_BUF_ERROR; - p = z->next_in; - m = z->state->sub.marker; - - /* search */ - while (n && m < 4) - { - if (*p == (Byte)(m < 2 ? 0 : 0xff)) - m++; - else if (*p) - m = 0; - else - m = 4 - m; - p++, n--; - } - - /* restore */ - z->total_in += p - z->next_in; - z->next_in = p; - z->avail_in = n; - z->state->sub.marker = m; - - /* return no joy or set up to restart on a new block */ - if (m != 4) - return Z_DATA_ERROR; - r = z->total_in; w = z->total_out; - inflateReset(z); - z->total_in = r; z->total_out = w; - z->state->mode = BLOCKS; - return Z_OK; -} - -#undef NEEDBYTE -#undef NEXTBYTE - -/*+++++*/ -/* infutil.h -- types and macros common to blocks and codes - * Copyright (C) 1995 Mark Adler - * For conditions of distribution and use, see copyright notice in zlib.h - */ - -/* WARNING: this file should *not* be used by applications. It is - part of the implementation of the compression library and is - subject to change. Applications should only use zlib.h. - */ - -/* inflate blocks semi-private state */ -struct inflate_blocks_state { - - /* mode */ - enum { - TYPE, /* get type bits (3, including end bit) */ - LENS, /* get lengths for stored */ - STORED, /* processing stored block */ - TABLE, /* get table lengths */ - BTREE, /* get bit lengths tree for a dynamic block */ - DTREE, /* get length, distance trees for a dynamic block */ - CODES, /* processing fixed or dynamic block */ - DRY, /* output remaining window bytes */ - DONEB, /* finished last block, done */ - BADB} /* got a data error--stuck here */ - mode; /* current inflate_block mode */ - - /* mode dependent information */ - union { - uInt left; /* if STORED, bytes left to copy */ - struct { - uInt table; /* table lengths (14 bits) */ - uInt index; /* index into blens (or border) */ - uIntf *blens; /* bit lengths of codes */ - uInt bb; /* bit length tree depth */ - inflate_huft *tb; /* bit length decoding tree */ - int nblens; /* # elements allocated at blens */ - } trees; /* if DTREE, decoding info for trees */ - struct { - inflate_huft *tl, *td; /* trees to free */ - inflate_codes_statef - *codes; - } decode; /* if CODES, current state */ - } sub; /* submode */ - uInt last; /* true if this block is the last block */ - - /* mode independent information */ - uInt bitk; /* bits in bit buffer */ - uLong bitb; /* bit buffer */ - Bytef *window; /* sliding window */ - Bytef *end; /* one byte after sliding window */ - Bytef *read; /* window read pointer */ - Bytef *write; /* window write pointer */ - check_func checkfn; /* check function */ - uLong check; /* check on output */ - -}; - - -/* defines for inflate input/output */ -/* update pointers and return */ -#define UPDBITS {s->bitb=b;s->bitk=k;} -#define UPDIN {z->avail_in=n;z->total_in+=p-z->next_in;z->next_in=p;} -#define UPDOUT {s->write=q;} -#define UPDATE {UPDBITS UPDIN UPDOUT} -#define LEAVE {UPDATE return inflate_flush(s,z,r);} -/* get bytes and bits */ -#define LOADIN {p=z->next_in;n=z->avail_in;b=s->bitb;k=s->bitk;} -#define NEEDBYTE {if(n)r=Z_OK;else LEAVE} -#define NEXTBYTE (n--,*p++) -#define NEEDBITS(j) {while(k<(j)){NEEDBYTE;b|=((uLong)NEXTBYTE)<>=(j);k-=(j);} -/* output bytes */ -#define WAVAIL (qread?s->read-q-1:s->end-q) -#define LOADOUT {q=s->write;m=WAVAIL;} -#define WRAP {if(q==s->end&&s->read!=s->window){q=s->window;m=WAVAIL;}} -#define FLUSH {UPDOUT r=inflate_flush(s,z,r); LOADOUT} -#define NEEDOUT {if(m==0){WRAP if(m==0){FLUSH WRAP if(m==0) LEAVE}}r=Z_OK;} -#define OUTBYTE(a) {*q++=(Byte)(a);m--;} -/* load local pointers */ -#define LOAD {LOADIN LOADOUT} - -/* - * The IBM 150 firmware munges the data right after _etext[]. This - * protects it. -- Cort - */ -local uInt protect_mask[] = {0, 0, 0, 0, 0, 0, 0, 0, 0 ,0 ,0 ,0}; -/* And'ing with mask[n] masks the lower n bits */ -local uInt inflate_mask[] = { - 0x0000, - 0x0001, 0x0003, 0x0007, 0x000f, 0x001f, 0x003f, 0x007f, 0x00ff, - 0x01ff, 0x03ff, 0x07ff, 0x0fff, 0x1fff, 0x3fff, 0x7fff, 0xffff -}; - -/* copy as much as possible from the sliding window to the output area */ -local int inflate_flush OF(( - inflate_blocks_statef *, - z_stream *, - int)); - -/*+++++*/ -/* inffast.h -- header to use inffast.c - * Copyright (C) 1995 Mark Adler - * For conditions of distribution and use, see copyright notice in zlib.h - */ - -/* WARNING: this file should *not* be used by applications. It is - part of the implementation of the compression library and is - subject to change. Applications should only use zlib.h. - */ - -local int inflate_fast OF(( - uInt, - uInt, - inflate_huft *, - inflate_huft *, - inflate_blocks_statef *, - z_stream *)); - - -/*+++++*/ -/* infblock.c -- interpret and process block types to last block - * Copyright (C) 1995 Mark Adler - * For conditions of distribution and use, see copyright notice in zlib.h - */ - -/* Table for deflate from PKZIP's appnote.txt. */ -local uInt border[] = { /* Order of the bit length code lengths */ - 16, 17, 18, 0, 8, 7, 9, 6, 10, 5, 11, 4, 12, 3, 13, 2, 14, 1, 15}; - -/* - Notes beyond the 1.93a appnote.txt: - - 1. Distance pointers never point before the beginning of the output - stream. - 2. Distance pointers can point back across blocks, up to 32k away. - 3. There is an implied maximum of 7 bits for the bit length table and - 15 bits for the actual data. - 4. If only one code exists, then it is encoded using one bit. (Zero - would be more efficient, but perhaps a little confusing.) If two - codes exist, they are coded using one bit each (0 and 1). - 5. There is no way of sending zero distance codes--a dummy must be - sent if there are none. (History: a pre 2.0 version of PKZIP would - store blocks with no distance codes, but this was discovered to be - too harsh a criterion.) Valid only for 1.93a. 2.04c does allow - zero distance codes, which is sent as one code of zero bits in - length. - 6. There are up to 286 literal/length codes. Code 256 represents the - end-of-block. Note however that the static length tree defines - 288 codes just to fill out the Huffman codes. Codes 286 and 287 - cannot be used though, since there is no length base or extra bits - defined for them. Similarily, there are up to 30 distance codes. - However, static trees define 32 codes (all 5 bits) to fill out the - Huffman codes, but the last two had better not show up in the data. - 7. Unzip can check dynamic Huffman blocks for complete code sets. - The exception is that a single code would not be complete (see #4). - 8. The five bits following the block type is really the number of - literal codes sent minus 257. - 9. Length codes 8,16,16 are interpreted as 13 length codes of 8 bits - (1+6+6). Therefore, to output three times the length, you output - three codes (1+1+1), whereas to output four times the same length, - you only need two codes (1+3). Hmm. - 10. In the tree reconstruction algorithm, Code = Code + Increment - only if BitLength(i) is not zero. (Pretty obvious.) - 11. Correction: 4 Bits: # of Bit Length codes - 4 (4 - 19) - 12. Note: length code 284 can represent 227-258, but length code 285 - really is 258. The last length deserves its own, short code - since it gets used a lot in very redundant files. The length - 258 is special since 258 - 3 (the min match length) is 255. - 13. The literal/length and distance code bit lengths are read as a - single stream of lengths. It is possible (and advantageous) for - a repeat code (16, 17, or 18) to go across the boundary between - the two sets of lengths. - */ - - -local void inflate_blocks_reset(s, z, c) -inflate_blocks_statef *s; -z_stream *z; -uLongf *c; -{ - if (s->checkfn != Z_NULL) - *c = s->check; - if (s->mode == BTREE || s->mode == DTREE) - ZFREE(z, s->sub.trees.blens, s->sub.trees.nblens * sizeof(uInt)); - if (s->mode == CODES) - { - inflate_codes_free(s->sub.decode.codes, z); - inflate_trees_free(s->sub.decode.td, z); - inflate_trees_free(s->sub.decode.tl, z); - } - s->mode = TYPE; - s->bitk = 0; - s->bitb = 0; - s->read = s->write = s->window; - if (s->checkfn != Z_NULL) - s->check = (*s->checkfn)(0L, Z_NULL, 0); - Trace((stderr, "inflate: blocks reset\n")); -} - - -local inflate_blocks_statef *inflate_blocks_new(z, c, w) -z_stream *z; -check_func c; -uInt w; -{ - inflate_blocks_statef *s; - - if ((s = (inflate_blocks_statef *)ZALLOC - (z,1,sizeof(struct inflate_blocks_state))) == Z_NULL) - return s; - if ((s->window = (Bytef *)ZALLOC(z, 1, w)) == Z_NULL) - { - ZFREE(z, s, sizeof(struct inflate_blocks_state)); - return Z_NULL; - } - s->end = s->window + w; - s->checkfn = c; - s->mode = TYPE; - Trace((stderr, "inflate: blocks allocated\n")); - inflate_blocks_reset(s, z, &s->check); - return s; -} - - -local int inflate_blocks(s, z, r) -inflate_blocks_statef *s; -z_stream *z; -int r; -{ - uInt t; /* temporary storage */ - uLong b; /* bit buffer */ - uInt k; /* bits in bit buffer */ - Bytef *p; /* input data pointer */ - uInt n; /* bytes available there */ - Bytef *q; /* output window write pointer */ - uInt m; /* bytes to end of window or read pointer */ - - /* copy input/output information to locals (UPDATE macro restores) */ - LOAD - - /* process input based on current state */ - while (1) switch (s->mode) - { - case TYPE: - NEEDBITS(3) - t = (uInt)b & 7; - s->last = t & 1; - switch (t >> 1) - { - case 0: /* stored */ - Trace((stderr, "inflate: stored block%s\n", - s->last ? " (last)" : "")); - DUMPBITS(3) - t = k & 7; /* go to byte boundary */ - DUMPBITS(t) - s->mode = LENS; /* get length of stored block */ - break; - case 1: /* fixed */ - Trace((stderr, "inflate: fixed codes block%s\n", - s->last ? " (last)" : "")); - { - uInt bl, bd; - inflate_huft *tl, *td; - - inflate_trees_fixed(&bl, &bd, &tl, &td); - s->sub.decode.codes = inflate_codes_new(bl, bd, tl, td, z); - if (s->sub.decode.codes == Z_NULL) - { - r = Z_MEM_ERROR; - LEAVE - } - s->sub.decode.tl = Z_NULL; /* don't try to free these */ - s->sub.decode.td = Z_NULL; - } - DUMPBITS(3) - s->mode = CODES; - break; - case 2: /* dynamic */ - Trace((stderr, "inflate: dynamic codes block%s\n", - s->last ? " (last)" : "")); - DUMPBITS(3) - s->mode = TABLE; - break; - case 3: /* illegal */ - DUMPBITS(3) - s->mode = BADB; - z->msg = "invalid block type"; - r = Z_DATA_ERROR; - LEAVE - } - break; - case LENS: - NEEDBITS(32) - if (((~b) >> 16) != (b & 0xffff)) - { - s->mode = BADB; - z->msg = "invalid stored block lengths"; - r = Z_DATA_ERROR; - LEAVE - } - s->sub.left = (uInt)b & 0xffff; - b = k = 0; /* dump bits */ - Tracev((stderr, "inflate: stored length %u\n", s->sub.left)); - s->mode = s->sub.left ? STORED : TYPE; - break; - case STORED: - if (n == 0) - LEAVE - NEEDOUT - t = s->sub.left; - if (t > n) t = n; - if (t > m) t = m; - zmemcpy(q, p, t); - p += t; n -= t; - q += t; m -= t; - if ((s->sub.left -= t) != 0) - break; - Tracev((stderr, "inflate: stored end, %lu total out\n", - z->total_out + (q >= s->read ? q - s->read : - (s->end - s->read) + (q - s->window)))); - s->mode = s->last ? DRY : TYPE; - break; - case TABLE: - NEEDBITS(14) - s->sub.trees.table = t = (uInt)b & 0x3fff; -#ifndef PKZIP_BUG_WORKAROUND - if ((t & 0x1f) > 29 || ((t >> 5) & 0x1f) > 29) - { - s->mode = BADB; - z->msg = "too many length or distance symbols"; - r = Z_DATA_ERROR; - LEAVE - } -#endif - t = 258 + (t & 0x1f) + ((t >> 5) & 0x1f); - if (t < 19) - t = 19; - if ((s->sub.trees.blens = (uIntf*)ZALLOC(z, t, sizeof(uInt))) == Z_NULL) - { - r = Z_MEM_ERROR; - LEAVE - } - s->sub.trees.nblens = t; - DUMPBITS(14) - s->sub.trees.index = 0; - Tracev((stderr, "inflate: table sizes ok\n")); - s->mode = BTREE; - case BTREE: - while (s->sub.trees.index < 4 + (s->sub.trees.table >> 10)) - { - NEEDBITS(3) - s->sub.trees.blens[border[s->sub.trees.index++]] = (uInt)b & 7; - DUMPBITS(3) - } - while (s->sub.trees.index < 19) - s->sub.trees.blens[border[s->sub.trees.index++]] = 0; - s->sub.trees.bb = 7; - t = inflate_trees_bits(s->sub.trees.blens, &s->sub.trees.bb, - &s->sub.trees.tb, z); - if (t != Z_OK) - { - r = t; - if (r == Z_DATA_ERROR) - s->mode = BADB; - LEAVE - } - s->sub.trees.index = 0; - Tracev((stderr, "inflate: bits tree ok\n")); - s->mode = DTREE; - case DTREE: - while (t = s->sub.trees.table, - s->sub.trees.index < 258 + (t & 0x1f) + ((t >> 5) & 0x1f)) - { - inflate_huft *h; - uInt i, j, c; - - t = s->sub.trees.bb; - NEEDBITS(t) - h = s->sub.trees.tb + ((uInt)b & inflate_mask[t]); - t = h->word.what.Bits; - c = h->more.Base; - if (c < 16) - { - DUMPBITS(t) - s->sub.trees.blens[s->sub.trees.index++] = c; - } - else /* c == 16..18 */ - { - i = c == 18 ? 7 : c - 14; - j = c == 18 ? 11 : 3; - NEEDBITS(t + i) - DUMPBITS(t) - j += (uInt)b & inflate_mask[i]; - DUMPBITS(i) - i = s->sub.trees.index; - t = s->sub.trees.table; - if (i + j > 258 + (t & 0x1f) + ((t >> 5) & 0x1f) || - (c == 16 && i < 1)) - { - s->mode = BADB; - z->msg = "invalid bit length repeat"; - r = Z_DATA_ERROR; - LEAVE - } - c = c == 16 ? s->sub.trees.blens[i - 1] : 0; - do { - s->sub.trees.blens[i++] = c; - } while (--j); - s->sub.trees.index = i; - } - } - inflate_trees_free(s->sub.trees.tb, z); - s->sub.trees.tb = Z_NULL; - { - uInt bl, bd; - inflate_huft *tl, *td; - inflate_codes_statef *c; - - bl = 9; /* must be <= 9 for lookahead assumptions */ - bd = 6; /* must be <= 9 for lookahead assumptions */ - t = s->sub.trees.table; - t = inflate_trees_dynamic(257 + (t & 0x1f), 1 + ((t >> 5) & 0x1f), - s->sub.trees.blens, &bl, &bd, &tl, &td, z); - if (t != Z_OK) - { - if (t == (uInt)Z_DATA_ERROR) - s->mode = BADB; - r = t; - LEAVE - } - Tracev((stderr, "inflate: trees ok\n")); - if ((c = inflate_codes_new(bl, bd, tl, td, z)) == Z_NULL) - { - inflate_trees_free(td, z); - inflate_trees_free(tl, z); - r = Z_MEM_ERROR; - LEAVE - } - ZFREE(z, s->sub.trees.blens, s->sub.trees.nblens * sizeof(uInt)); - s->sub.decode.codes = c; - s->sub.decode.tl = tl; - s->sub.decode.td = td; - } - s->mode = CODES; - case CODES: - UPDATE - if ((r = inflate_codes(s, z, r)) != Z_STREAM_END) - return inflate_flush(s, z, r); - r = Z_OK; - inflate_codes_free(s->sub.decode.codes, z); - inflate_trees_free(s->sub.decode.td, z); - inflate_trees_free(s->sub.decode.tl, z); - LOAD - Tracev((stderr, "inflate: codes end, %lu total out\n", - z->total_out + (q >= s->read ? q - s->read : - (s->end - s->read) + (q - s->window)))); - if (!s->last) - { - s->mode = TYPE; - break; - } - if (k > 7) /* return unused byte, if any */ - { - Assert(k < 16, "inflate_codes grabbed too many bytes") - k -= 8; - n++; - p--; /* can always return one */ - } - s->mode = DRY; - case DRY: - FLUSH - if (s->read != s->write) - LEAVE - s->mode = DONEB; - case DONEB: - r = Z_STREAM_END; - LEAVE - case BADB: - r = Z_DATA_ERROR; - LEAVE - default: - r = Z_STREAM_ERROR; - LEAVE - } -} - - -local int inflate_blocks_free(s, z, c) -inflate_blocks_statef *s; -z_stream *z; -uLongf *c; -{ - inflate_blocks_reset(s, z, c); - ZFREE(z, s->window, s->end - s->window); - ZFREE(z, s, sizeof(struct inflate_blocks_state)); - Trace((stderr, "inflate: blocks freed\n")); - return Z_OK; -} - -/* - * This subroutine adds the data at next_in/avail_in to the output history - * without performing any output. The output buffer must be "caught up"; - * i.e. no pending output (hence s->read equals s->write), and the state must - * be BLOCKS (i.e. we should be willing to see the start of a series of - * BLOCKS). On exit, the output will also be caught up, and the checksum - * will have been updated if need be. - */ -local int inflate_addhistory(s, z) -inflate_blocks_statef *s; -z_stream *z; -{ - uLong b; /* bit buffer */ /* NOT USED HERE */ - uInt k; /* bits in bit buffer */ /* NOT USED HERE */ - uInt t; /* temporary storage */ - Bytef *p; /* input data pointer */ - uInt n; /* bytes available there */ - Bytef *q; /* output window write pointer */ - uInt m; /* bytes to end of window or read pointer */ - - if (s->read != s->write) - return Z_STREAM_ERROR; - if (s->mode != TYPE) - return Z_DATA_ERROR; - - /* we're ready to rock */ - LOAD - /* while there is input ready, copy to output buffer, moving - * pointers as needed. - */ - while (n) { - t = n; /* how many to do */ - /* is there room until end of buffer? */ - if (t > m) t = m; - /* update check information */ - if (s->checkfn != Z_NULL) - s->check = (*s->checkfn)(s->check, q, t); - zmemcpy(q, p, t); - q += t; - p += t; - n -= t; - z->total_out += t; - s->read = q; /* drag read pointer forward */ -/* WRAP */ /* expand WRAP macro by hand to handle s->read */ - if (q == s->end) { - s->read = q = s->window; - m = WAVAIL; - } - } - UPDATE - return Z_OK; -} - - -/* - * At the end of a Deflate-compressed PPP packet, we expect to have seen - * a `stored' block type value but not the (zero) length bytes. - */ -local int inflate_packet_flush(s) - inflate_blocks_statef *s; -{ - if (s->mode != LENS) - return Z_DATA_ERROR; - s->mode = TYPE; - return Z_OK; -} - - -/*+++++*/ -/* inftrees.c -- generate Huffman trees for efficient decoding - * Copyright (C) 1995 Mark Adler - * For conditions of distribution and use, see copyright notice in zlib.h - */ - -/* simplify the use of the inflate_huft type with some defines */ -#define base more.Base -#define next more.Next -#define exop word.what.Exop -#define bits word.what.Bits - - -local int huft_build OF(( - uIntf *, /* code lengths in bits */ - uInt, /* number of codes */ - uInt, /* number of "simple" codes */ - uIntf *, /* list of base values for non-simple codes */ - uIntf *, /* list of extra bits for non-simple codes */ - inflate_huft * FAR*,/* result: starting table */ - uIntf *, /* maximum lookup bits (returns actual) */ - z_stream *)); /* for zalloc function */ - -local voidpf falloc OF(( - voidpf, /* opaque pointer (not used) */ - uInt, /* number of items */ - uInt)); /* size of item */ - -local void ffree OF(( - voidpf q, /* opaque pointer (not used) */ - voidpf p, /* what to free (not used) */ - uInt n)); /* number of bytes (not used) */ - -/* Tables for deflate from PKZIP's appnote.txt. */ -local uInt cplens[] = { /* Copy lengths for literal codes 257..285 */ - 3, 4, 5, 6, 7, 8, 9, 10, 11, 13, 15, 17, 19, 23, 27, 31, - 35, 43, 51, 59, 67, 83, 99, 115, 131, 163, 195, 227, 258, 0, 0}; - /* actually lengths - 2; also see note #13 above about 258 */ -local uInt cplext[] = { /* Extra bits for literal codes 257..285 */ - 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 1, 2, 2, 2, 2, - 3, 3, 3, 3, 4, 4, 4, 4, 5, 5, 5, 5, 0, 192, 192}; /* 192==invalid */ -local uInt cpdist[] = { /* Copy offsets for distance codes 0..29 */ - 1, 2, 3, 4, 5, 7, 9, 13, 17, 25, 33, 49, 65, 97, 129, 193, - 257, 385, 513, 769, 1025, 1537, 2049, 3073, 4097, 6145, - 8193, 12289, 16385, 24577}; -local uInt cpdext[] = { /* Extra bits for distance codes */ - 0, 0, 0, 0, 1, 1, 2, 2, 3, 3, 4, 4, 5, 5, 6, 6, - 7, 7, 8, 8, 9, 9, 10, 10, 11, 11, - 12, 12, 13, 13}; - -/* - Huffman code decoding is performed using a multi-level table lookup. - The fastest way to decode is to simply build a lookup table whose - size is determined by the longest code. However, the time it takes - to build this table can also be a factor if the data being decoded - is not very long. The most common codes are necessarily the - shortest codes, so those codes dominate the decoding time, and hence - the speed. The idea is you can have a shorter table that decodes the - shorter, more probable codes, and then point to subsidiary tables for - the longer codes. The time it costs to decode the longer codes is - then traded against the time it takes to make longer tables. - - This results of this trade are in the variables lbits and dbits - below. lbits is the number of bits the first level table for literal/ - length codes can decode in one step, and dbits is the same thing for - the distance codes. Subsequent tables are also less than or equal to - those sizes. These values may be adjusted either when all of the - codes are shorter than that, in which case the longest code length in - bits is used, or when the shortest code is *longer* than the requested - table size, in which case the length of the shortest code in bits is - used. - - There are two different values for the two tables, since they code a - different number of possibilities each. The literal/length table - codes 286 possible values, or in a flat code, a little over eight - bits. The distance table codes 30 possible values, or a little less - than five bits, flat. The optimum values for speed end up being - about one bit more than those, so lbits is 8+1 and dbits is 5+1. - The optimum values may differ though from machine to machine, and - possibly even between compilers. Your mileage may vary. - */ - - -/* If BMAX needs to be larger than 16, then h and x[] should be uLong. */ -#define BMAX 15 /* maximum bit length of any code */ -#define N_MAX 288 /* maximum number of codes in any set */ - -#ifdef DEBUG_ZLIB - uInt inflate_hufts; -#endif - -local int huft_build(b, n, s, d, e, t, m, zs) -uIntf *b; /* code lengths in bits (all assumed <= BMAX) */ -uInt n; /* number of codes (assumed <= N_MAX) */ -uInt s; /* number of simple-valued codes (0..s-1) */ -uIntf *d; /* list of base values for non-simple codes */ -uIntf *e; /* list of extra bits for non-simple codes */ -inflate_huft * FAR *t; /* result: starting table */ -uIntf *m; /* maximum lookup bits, returns actual */ -z_stream *zs; /* for zalloc function */ -/* Given a list of code lengths and a maximum table size, make a set of - tables to decode that set of codes. Return Z_OK on success, Z_BUF_ERROR - if the given code set is incomplete (the tables are still built in this - case), Z_DATA_ERROR if the input is invalid (all zero length codes or an - over-subscribed set of lengths), or Z_MEM_ERROR if not enough memory. */ -{ - - uInt a; /* counter for codes of length k */ - uInt c[BMAX+1]; /* bit length count table */ - uInt f; /* i repeats in table every f entries */ - int g; /* maximum code length */ - int h; /* table level */ - register uInt i; /* counter, current code */ - register uInt j; /* counter */ - register int k; /* number of bits in current code */ - int l; /* bits per table (returned in m) */ - register uIntf *p; /* pointer into c[], b[], or v[] */ - inflate_huft *q; /* points to current table */ - struct inflate_huft_s r; /* table entry for structure assignment */ - inflate_huft *u[BMAX]; /* table stack */ - uInt v[N_MAX]; /* values in order of bit length */ - register int w; /* bits before this table == (l * h) */ - uInt x[BMAX+1]; /* bit offsets, then code stack */ - uIntf *xp; /* pointer into x */ - int y; /* number of dummy codes added */ - uInt z; /* number of entries in current table */ - - - /* Generate counts for each bit length */ - p = c; -#define C0 *p++ = 0; -#define C2 C0 C0 C0 C0 -#define C4 C2 C2 C2 C2 - C4 /* clear c[]--assume BMAX+1 is 16 */ - p = b; i = n; - do { - c[*p++]++; /* assume all entries <= BMAX */ - } while (--i); - if (c[0] == n) /* null input--all zero length codes */ - { - *t = (inflate_huft *)Z_NULL; - *m = 0; - return Z_OK; - } - - - /* Find minimum and maximum length, bound *m by those */ - l = *m; - for (j = 1; j <= BMAX; j++) - if (c[j]) - break; - k = j; /* minimum code length */ - if ((uInt)l < j) - l = j; - for (i = BMAX; i; i--) - if (c[i]) - break; - g = i; /* maximum code length */ - if ((uInt)l > i) - l = i; - *m = l; - - - /* Adjust last length count to fill out codes, if needed */ - for (y = 1 << j; j < i; j++, y <<= 1) - if ((y -= c[j]) < 0) - return Z_DATA_ERROR; - if ((y -= c[i]) < 0) - return Z_DATA_ERROR; - c[i] += y; - - - /* Generate starting offsets into the value table for each length */ - x[1] = j = 0; - p = c + 1; xp = x + 2; - while (--i) { /* note that i == g from above */ - *xp++ = (j += *p++); - } - - - /* Make a table of values in order of bit lengths */ - p = b; i = 0; - do { - if ((j = *p++) != 0) - v[x[j]++] = i; - } while (++i < n); - - - /* Generate the Huffman codes and for each, make the table entries */ - x[0] = i = 0; /* first Huffman code is zero */ - p = v; /* grab values in bit order */ - h = -1; /* no tables yet--level -1 */ - w = -l; /* bits decoded == (l * h) */ - u[0] = (inflate_huft *)Z_NULL; /* just to keep compilers happy */ - q = (inflate_huft *)Z_NULL; /* ditto */ - z = 0; /* ditto */ - - /* go through the bit lengths (k already is bits in shortest code) */ - for (; k <= g; k++) - { - a = c[k]; - while (a--) - { - /* here i is the Huffman code of length k bits for value *p */ - /* make tables up to required level */ - while (k > w + l) - { - h++; - w += l; /* previous table always l bits */ - - /* compute minimum size table less than or equal to l bits */ - z = (z = g - w) > (uInt)l ? l : z; /* table size upper limit */ - if ((f = 1 << (j = k - w)) > a + 1) /* try a k-w bit table */ - { /* too few codes for k-w bit table */ - f -= a + 1; /* deduct codes from patterns left */ - xp = c + k; - if (j < z) - while (++j < z) /* try smaller tables up to z bits */ - { - if ((f <<= 1) <= *++xp) - break; /* enough codes to use up j bits */ - f -= *xp; /* else deduct codes from patterns */ - } - } - z = 1 << j; /* table entries for j-bit table */ - - /* allocate and link in new table */ - if ((q = (inflate_huft *)ZALLOC - (zs,z + 1,sizeof(inflate_huft))) == Z_NULL) - { - if (h) - inflate_trees_free(u[0], zs); - return Z_MEM_ERROR; /* not enough memory */ - } - q->word.Nalloc = z + 1; -#ifdef DEBUG_ZLIB - inflate_hufts += z + 1; -#endif - *t = q + 1; /* link to list for huft_free() */ - *(t = &(q->next)) = Z_NULL; - u[h] = ++q; /* table starts after link */ - - /* connect to last table, if there is one */ - if (h) - { - x[h] = i; /* save pattern for backing up */ - r.bits = (Byte)l; /* bits to dump before this table */ - r.exop = (Byte)j; /* bits in this table */ - r.next = q; /* pointer to this table */ - j = i >> (w - l); /* (get around Turbo C bug) */ - u[h-1][j] = r; /* connect to last table */ - } - } - - /* set up table entry in r */ - r.bits = (Byte)(k - w); - if (p >= v + n) - r.exop = 128 + 64; /* out of values--invalid code */ - else if (*p < s) - { - r.exop = (Byte)(*p < 256 ? 0 : 32 + 64); /* 256 is end-of-block */ - r.base = *p++; /* simple code is just the value */ - } - else - { - r.exop = (Byte)e[*p - s] + 16 + 64; /* non-simple--look up in lists */ - r.base = d[*p++ - s]; - } - - /* fill code-like entries with r */ - f = 1 << (k - w); - for (j = i >> w; j < z; j += f) - q[j] = r; - - /* backwards increment the k-bit code i */ - for (j = 1 << (k - 1); i & j; j >>= 1) - i ^= j; - i ^= j; - - /* backup over finished tables */ - while ((i & ((1 << w) - 1)) != x[h]) - { - h--; /* don't need to update q */ - w -= l; - } - } - } - - - /* Return Z_BUF_ERROR if we were given an incomplete table */ - return y != 0 && g != 1 ? Z_BUF_ERROR : Z_OK; -} - - -local int inflate_trees_bits(c, bb, tb, z) -uIntf *c; /* 19 code lengths */ -uIntf *bb; /* bits tree desired/actual depth */ -inflate_huft * FAR *tb; /* bits tree result */ -z_stream *z; /* for zfree function */ -{ - int r; - - r = huft_build(c, 19, 19, (uIntf*)Z_NULL, (uIntf*)Z_NULL, tb, bb, z); - if (r == Z_DATA_ERROR) - z->msg = "oversubscribed dynamic bit lengths tree"; - else if (r == Z_BUF_ERROR) - { - inflate_trees_free(*tb, z); - z->msg = "incomplete dynamic bit lengths tree"; - r = Z_DATA_ERROR; - } - return r; -} - - -local int inflate_trees_dynamic(nl, nd, c, bl, bd, tl, td, z) -uInt nl; /* number of literal/length codes */ -uInt nd; /* number of distance codes */ -uIntf *c; /* that many (total) code lengths */ -uIntf *bl; /* literal desired/actual bit depth */ -uIntf *bd; /* distance desired/actual bit depth */ -inflate_huft * FAR *tl; /* literal/length tree result */ -inflate_huft * FAR *td; /* distance tree result */ -z_stream *z; /* for zfree function */ -{ - int r; - - /* build literal/length tree */ - if ((r = huft_build(c, nl, 257, cplens, cplext, tl, bl, z)) != Z_OK) - { - if (r == Z_DATA_ERROR) - z->msg = "oversubscribed literal/length tree"; - else if (r == Z_BUF_ERROR) - { - inflate_trees_free(*tl, z); - z->msg = "incomplete literal/length tree"; - r = Z_DATA_ERROR; - } - return r; - } - - /* build distance tree */ - if ((r = huft_build(c + nl, nd, 0, cpdist, cpdext, td, bd, z)) != Z_OK) - { - if (r == Z_DATA_ERROR) - z->msg = "oversubscribed literal/length tree"; - else if (r == Z_BUF_ERROR) { -#ifdef PKZIP_BUG_WORKAROUND - r = Z_OK; - } -#else - inflate_trees_free(*td, z); - z->msg = "incomplete literal/length tree"; - r = Z_DATA_ERROR; - } - inflate_trees_free(*tl, z); - return r; -#endif - } - - /* done */ - return Z_OK; -} - - -/* build fixed tables only once--keep them here */ -local int fixed_lock = 0; -local int fixed_built = 0; -#define FIXEDH 530 /* number of hufts used by fixed tables */ -local uInt fixed_left = FIXEDH; -local inflate_huft fixed_mem[FIXEDH]; -local uInt fixed_bl; -local uInt fixed_bd; -local inflate_huft *fixed_tl; -local inflate_huft *fixed_td; - - -local voidpf falloc(q, n, s) -voidpf q; /* opaque pointer (not used) */ -uInt n; /* number of items */ -uInt s; /* size of item */ -{ - Assert(s == sizeof(inflate_huft) && n <= fixed_left, - "inflate_trees falloc overflow"); - if (q) s++; /* to make some compilers happy */ - fixed_left -= n; - return (voidpf)(fixed_mem + fixed_left); -} - - -local void ffree(q, p, n) -voidpf q; -voidpf p; -uInt n; -{ - Assert(0, "inflate_trees ffree called!"); - if (q) q = p; /* to make some compilers happy */ -} - - -local int inflate_trees_fixed(bl, bd, tl, td) -uIntf *bl; /* literal desired/actual bit depth */ -uIntf *bd; /* distance desired/actual bit depth */ -inflate_huft * FAR *tl; /* literal/length tree result */ -inflate_huft * FAR *td; /* distance tree result */ -{ - /* build fixed tables if not built already--lock out other instances */ - while (++fixed_lock > 1) - fixed_lock--; - if (!fixed_built) - { - int k; /* temporary variable */ - unsigned c[288]; /* length list for huft_build */ - z_stream z; /* for falloc function */ - - /* set up fake z_stream for memory routines */ - z.zalloc = falloc; - z.zfree = ffree; - z.opaque = Z_NULL; - - /* literal table */ - for (k = 0; k < 144; k++) - c[k] = 8; - for (; k < 256; k++) - c[k] = 9; - for (; k < 280; k++) - c[k] = 7; - for (; k < 288; k++) - c[k] = 8; - fixed_bl = 7; - huft_build(c, 288, 257, cplens, cplext, &fixed_tl, &fixed_bl, &z); - - /* distance table */ - for (k = 0; k < 30; k++) - c[k] = 5; - fixed_bd = 5; - huft_build(c, 30, 0, cpdist, cpdext, &fixed_td, &fixed_bd, &z); - - /* done */ - fixed_built = 1; - } - fixed_lock--; - *bl = fixed_bl; - *bd = fixed_bd; - *tl = fixed_tl; - *td = fixed_td; - return Z_OK; -} - - -local int inflate_trees_free(t, z) -inflate_huft *t; /* table to free */ -z_stream *z; /* for zfree function */ -/* Free the malloc'ed tables built by huft_build(), which makes a linked - list of the tables it made, with the links in a dummy first entry of - each table. */ -{ - register inflate_huft *p, *q; - - /* Go through linked list, freeing from the malloced (t[-1]) address. */ - p = t; - while (p != Z_NULL) - { - q = (--p)->next; - ZFREE(z, p, p->word.Nalloc * sizeof(inflate_huft)); - p = q; - } - return Z_OK; -} - -/*+++++*/ -/* infcodes.c -- process literals and length/distance pairs - * Copyright (C) 1995 Mark Adler - * For conditions of distribution and use, see copyright notice in zlib.h - */ - -/* simplify the use of the inflate_huft type with some defines */ -#define base more.Base -#define next more.Next -#define exop word.what.Exop -#define bits word.what.Bits - -/* inflate codes private state */ -struct inflate_codes_state { - - /* mode */ - enum { /* waiting for "i:"=input, "o:"=output, "x:"=nothing */ - START, /* x: set up for LEN */ - LEN, /* i: get length/literal/eob next */ - LENEXT, /* i: getting length extra (have base) */ - DIST, /* i: get distance next */ - DISTEXT, /* i: getting distance extra */ - COPY, /* o: copying bytes in window, waiting for space */ - LIT, /* o: got literal, waiting for output space */ - WASH, /* o: got eob, possibly still output waiting */ - END, /* x: got eob and all data flushed */ - BADCODE} /* x: got error */ - mode; /* current inflate_codes mode */ - - /* mode dependent information */ - uInt len; - union { - struct { - inflate_huft *tree; /* pointer into tree */ - uInt need; /* bits needed */ - } code; /* if LEN or DIST, where in tree */ - uInt lit; /* if LIT, literal */ - struct { - uInt get; /* bits to get for extra */ - uInt dist; /* distance back to copy from */ - } copy; /* if EXT or COPY, where and how much */ - } sub; /* submode */ - - /* mode independent information */ - Byte lbits; /* ltree bits decoded per branch */ - Byte dbits; /* dtree bits decoder per branch */ - inflate_huft *ltree; /* literal/length/eob tree */ - inflate_huft *dtree; /* distance tree */ - -}; - - -local inflate_codes_statef *inflate_codes_new(bl, bd, tl, td, z) -uInt bl, bd; -inflate_huft *tl, *td; -z_stream *z; -{ - inflate_codes_statef *c; - - if ((c = (inflate_codes_statef *) - ZALLOC(z,1,sizeof(struct inflate_codes_state))) != Z_NULL) - { - c->mode = START; - c->lbits = (Byte)bl; - c->dbits = (Byte)bd; - c->ltree = tl; - c->dtree = td; - Tracev((stderr, "inflate: codes new\n")); - } - return c; -} - - -local int inflate_codes(s, z, r) -inflate_blocks_statef *s; -z_stream *z; -int r; -{ - uInt j; /* temporary storage */ - inflate_huft *t; /* temporary pointer */ - uInt e; /* extra bits or operation */ - uLong b; /* bit buffer */ - uInt k; /* bits in bit buffer */ - Bytef *p; /* input data pointer */ - uInt n; /* bytes available there */ - Bytef *q; /* output window write pointer */ - uInt m; /* bytes to end of window or read pointer */ - Bytef *f; /* pointer to copy strings from */ - inflate_codes_statef *c = s->sub.decode.codes; /* codes state */ - - /* copy input/output information to locals (UPDATE macro restores) */ - LOAD - - /* process input and output based on current state */ - while (1) switch (c->mode) - { /* waiting for "i:"=input, "o:"=output, "x:"=nothing */ - case START: /* x: set up for LEN */ -#ifndef SLOW - if (m >= 258 && n >= 10) - { - UPDATE - r = inflate_fast(c->lbits, c->dbits, c->ltree, c->dtree, s, z); - LOAD - if (r != Z_OK) - { - c->mode = r == Z_STREAM_END ? WASH : BADCODE; - break; - } - } -#endif /* !SLOW */ - c->sub.code.need = c->lbits; - c->sub.code.tree = c->ltree; - c->mode = LEN; - case LEN: /* i: get length/literal/eob next */ - j = c->sub.code.need; - NEEDBITS(j) - t = c->sub.code.tree + ((uInt)b & inflate_mask[j]); - DUMPBITS(t->bits) - e = (uInt)(t->exop); - if (e == 0) /* literal */ - { - c->sub.lit = t->base; - Tracevv((stderr, t->base >= 0x20 && t->base < 0x7f ? - "inflate: literal '%c'\n" : - "inflate: literal 0x%02x\n", t->base)); - c->mode = LIT; - break; - } - if (e & 16) /* length */ - { - c->sub.copy.get = e & 15; - c->len = t->base; - c->mode = LENEXT; - break; - } - if ((e & 64) == 0) /* next table */ - { - c->sub.code.need = e; - c->sub.code.tree = t->next; - break; - } - if (e & 32) /* end of block */ - { - Tracevv((stderr, "inflate: end of block\n")); - c->mode = WASH; - break; - } - c->mode = BADCODE; /* invalid code */ - z->msg = "invalid literal/length code"; - r = Z_DATA_ERROR; - LEAVE - case LENEXT: /* i: getting length extra (have base) */ - j = c->sub.copy.get; - NEEDBITS(j) - c->len += (uInt)b & inflate_mask[j]; - DUMPBITS(j) - c->sub.code.need = c->dbits; - c->sub.code.tree = c->dtree; - Tracevv((stderr, "inflate: length %u\n", c->len)); - c->mode = DIST; - case DIST: /* i: get distance next */ - j = c->sub.code.need; - NEEDBITS(j) - t = c->sub.code.tree + ((uInt)b & inflate_mask[j]); - DUMPBITS(t->bits) - e = (uInt)(t->exop); - if (e & 16) /* distance */ - { - c->sub.copy.get = e & 15; - c->sub.copy.dist = t->base; - c->mode = DISTEXT; - break; - } - if ((e & 64) == 0) /* next table */ - { - c->sub.code.need = e; - c->sub.code.tree = t->next; - break; - } - c->mode = BADCODE; /* invalid code */ - z->msg = "invalid distance code"; - r = Z_DATA_ERROR; - LEAVE - case DISTEXT: /* i: getting distance extra */ - j = c->sub.copy.get; - NEEDBITS(j) - c->sub.copy.dist += (uInt)b & inflate_mask[j]; - DUMPBITS(j) - Tracevv((stderr, "inflate: distance %u\n", c->sub.copy.dist)); - c->mode = COPY; - case COPY: /* o: copying bytes in window, waiting for space */ -#ifndef __TURBOC__ /* Turbo C bug for following expression */ - f = (uInt)(q - s->window) < c->sub.copy.dist ? - s->end - (c->sub.copy.dist - (q - s->window)) : - q - c->sub.copy.dist; -#else - f = q - c->sub.copy.dist; - if ((uInt)(q - s->window) < c->sub.copy.dist) - f = s->end - (c->sub.copy.dist - (q - s->window)); -#endif - while (c->len) - { - NEEDOUT - OUTBYTE(*f++) - if (f == s->end) - f = s->window; - c->len--; - } - c->mode = START; - break; - case LIT: /* o: got literal, waiting for output space */ - NEEDOUT - OUTBYTE(c->sub.lit) - c->mode = START; - break; - case WASH: /* o: got eob, possibly more output */ - FLUSH - if (s->read != s->write) - LEAVE - c->mode = END; - case END: - r = Z_STREAM_END; - LEAVE - case BADCODE: /* x: got error */ - r = Z_DATA_ERROR; - LEAVE - default: - r = Z_STREAM_ERROR; - LEAVE - } -} - - -local void inflate_codes_free(c, z) -inflate_codes_statef *c; -z_stream *z; -{ - ZFREE(z, c, sizeof(struct inflate_codes_state)); - Tracev((stderr, "inflate: codes free\n")); -} - -/*+++++*/ -/* inflate_util.c -- data and routines common to blocks and codes - * Copyright (C) 1995 Mark Adler - * For conditions of distribution and use, see copyright notice in zlib.h - */ - -/* copy as much as possible from the sliding window to the output area */ -local int inflate_flush(s, z, r) -inflate_blocks_statef *s; -z_stream *z; -int r; -{ - uInt n; - Bytef *p, *q; - - /* local copies of source and destination pointers */ - p = z->next_out; - q = s->read; - - /* compute number of bytes to copy as far as end of window */ - n = (uInt)((q <= s->write ? s->write : s->end) - q); - if (n > z->avail_out) n = z->avail_out; - if (n && r == Z_BUF_ERROR) r = Z_OK; - - /* update counters */ - z->avail_out -= n; - z->total_out += n; - - /* update check information */ - if (s->checkfn != Z_NULL) - s->check = (*s->checkfn)(s->check, q, n); - - /* copy as far as end of window */ - zmemcpy(p, q, n); - p += n; - q += n; - - /* see if more to copy at beginning of window */ - if (q == s->end) - { - /* wrap pointers */ - q = s->window; - if (s->write == s->end) - s->write = s->window; - - /* compute bytes to copy */ - n = (uInt)(s->write - q); - if (n > z->avail_out) n = z->avail_out; - if (n && r == Z_BUF_ERROR) r = Z_OK; - - /* update counters */ - z->avail_out -= n; - z->total_out += n; - - /* update check information */ - if (s->checkfn != Z_NULL) - s->check = (*s->checkfn)(s->check, q, n); - - /* copy */ - zmemcpy(p, q, n); - p += n; - q += n; - } - - /* update pointers */ - z->next_out = p; - s->read = q; - - /* done */ - return r; -} - - -/*+++++*/ -/* inffast.c -- process literals and length/distance pairs fast - * Copyright (C) 1995 Mark Adler - * For conditions of distribution and use, see copyright notice in zlib.h - */ - -/* simplify the use of the inflate_huft type with some defines */ -#define base more.Base -#define next more.Next -#define exop word.what.Exop -#define bits word.what.Bits - -/* macros for bit input with no checking and for returning unused bytes */ -#define GRABBITS(j) {while(k<(j)){b|=((uLong)NEXTBYTE)<>3);p-=c;k&=7;} - -/* Called with number of bytes left to write in window at least 258 - (the maximum string length) and number of input bytes available - at least ten. The ten bytes are six bytes for the longest length/ - distance pair plus four bytes for overloading the bit buffer. */ - -local int inflate_fast(bl, bd, tl, td, s, z) -uInt bl, bd; -inflate_huft *tl, *td; -inflate_blocks_statef *s; -z_stream *z; -{ - inflate_huft *t; /* temporary pointer */ - uInt e; /* extra bits or operation */ - uLong b; /* bit buffer */ - uInt k; /* bits in bit buffer */ - Bytef *p; /* input data pointer */ - uInt n; /* bytes available there */ - Bytef *q; /* output window write pointer */ - uInt m; /* bytes to end of window or read pointer */ - uInt ml; /* mask for literal/length tree */ - uInt md; /* mask for distance tree */ - uInt c; /* bytes to copy */ - uInt d; /* distance back to copy from */ - Bytef *r; /* copy source pointer */ - - /* load input, output, bit values */ - LOAD - - /* initialize masks */ - ml = inflate_mask[bl]; - md = inflate_mask[bd]; - - /* do until not enough input or output space for fast loop */ - do { /* assume called with m >= 258 && n >= 10 */ - /* get literal/length code */ - GRABBITS(20) /* max bits for literal/length code */ - if ((e = (t = tl + ((uInt)b & ml))->exop) == 0) - { - DUMPBITS(t->bits) - Tracevv((stderr, t->base >= 0x20 && t->base < 0x7f ? - "inflate: * literal '%c'\n" : - "inflate: * literal 0x%02x\n", t->base)); - *q++ = (Byte)t->base; - m--; - continue; - } - do { - DUMPBITS(t->bits) - if (e & 16) - { - /* get extra bits for length */ - e &= 15; - c = t->base + ((uInt)b & inflate_mask[e]); - DUMPBITS(e) - Tracevv((stderr, "inflate: * length %u\n", c)); - - /* decode distance base of block to copy */ - GRABBITS(15); /* max bits for distance code */ - e = (t = td + ((uInt)b & md))->exop; - do { - DUMPBITS(t->bits) - if (e & 16) - { - /* get extra bits to add to distance base */ - e &= 15; - GRABBITS(e) /* get extra bits (up to 13) */ - d = t->base + ((uInt)b & inflate_mask[e]); - DUMPBITS(e) - Tracevv((stderr, "inflate: * distance %u\n", d)); - - /* do the copy */ - m -= c; - if ((uInt)(q - s->window) >= d) /* offset before dest */ - { /* just copy */ - r = q - d; - *q++ = *r++; c--; /* minimum count is three, */ - *q++ = *r++; c--; /* so unroll loop a little */ - } - else /* else offset after destination */ - { - e = d - (q - s->window); /* bytes from offset to end */ - r = s->end - e; /* pointer to offset */ - if (c > e) /* if source crosses, */ - { - c -= e; /* copy to end of window */ - do { - *q++ = *r++; - } while (--e); - r = s->window; /* copy rest from start of window */ - } - } - do { /* copy all or what's left */ - *q++ = *r++; - } while (--c); - break; - } - else if ((e & 64) == 0) - e = (t = t->next + ((uInt)b & inflate_mask[e]))->exop; - else - { - z->msg = "invalid distance code"; - UNGRAB - UPDATE - return Z_DATA_ERROR; - } - } while (1); - break; - } - if ((e & 64) == 0) - { - if ((e = (t = t->next + ((uInt)b & inflate_mask[e]))->exop) == 0) - { - DUMPBITS(t->bits) - Tracevv((stderr, t->base >= 0x20 && t->base < 0x7f ? - "inflate: * literal '%c'\n" : - "inflate: * literal 0x%02x\n", t->base)); - *q++ = (Byte)t->base; - m--; - break; - } - } - else if (e & 32) - { - Tracevv((stderr, "inflate: * end of block\n")); - UNGRAB - UPDATE - return Z_STREAM_END; - } - else - { - z->msg = "invalid literal/length code"; - UNGRAB - UPDATE - return Z_DATA_ERROR; - } - } while (1); - } while (m >= 258 && n >= 10); - - /* not enough input or output--restore pointers and return */ - UNGRAB - UPDATE - return Z_OK; -} - - -/*+++++*/ -/* zutil.c -- target dependent utility functions for the compression library - * Copyright (C) 1995 Jean-loup Gailly. - * For conditions of distribution and use, see copyright notice in zlib.h - */ - -/* From: zutil.c,v 1.8 1995/05/03 17:27:12 jloup Exp */ - -char *zlib_version = ZLIB_VERSION; - -char *z_errmsg[] = { -"stream end", /* Z_STREAM_END 1 */ -"", /* Z_OK 0 */ -"file error", /* Z_ERRNO (-1) */ -"stream error", /* Z_STREAM_ERROR (-2) */ -"data error", /* Z_DATA_ERROR (-3) */ -"insufficient memory", /* Z_MEM_ERROR (-4) */ -"buffer error", /* Z_BUF_ERROR (-5) */ -""}; - - -/*+++++*/ -/* adler32.c -- compute the Adler-32 checksum of a data stream - * Copyright (C) 1995 Mark Adler - * For conditions of distribution and use, see copyright notice in zlib.h - */ - -/* From: adler32.c,v 1.6 1995/05/03 17:27:08 jloup Exp */ - -#define BASE 65521L /* largest prime smaller than 65536 */ -#define NMAX 5552 -/* NMAX is the largest n such that 255n(n+1)/2 + (n+1)(BASE-1) <= 2^32-1 */ - -#define DO1(buf) {s1 += *buf++; s2 += s1;} -#define DO2(buf) DO1(buf); DO1(buf); -#define DO4(buf) DO2(buf); DO2(buf); -#define DO8(buf) DO4(buf); DO4(buf); -#define DO16(buf) DO8(buf); DO8(buf); - -/* ========================================================================= */ -uLong adler32(adler, buf, len) - uLong adler; - Bytef *buf; - uInt len; -{ - unsigned long s1 = adler & 0xffff; - unsigned long s2 = (adler >> 16) & 0xffff; - int k; - - if (buf == Z_NULL) return 1L; - - while (len > 0) { - k = len < NMAX ? len : NMAX; - len -= k; - while (k >= 16) { - DO16(buf); - k -= 16; - } - if (k != 0) do { - DO1(buf); - } while (--k); - s1 %= BASE; - s2 %= BASE; - } - return (s2 << 16) | s1; -} diff --git a/arch/xtensa/boot/lib/zmem.c b/arch/xtensa/boot/lib/zmem.c index 7848f126d67..d9862aa8ca2 100644 --- a/arch/xtensa/boot/lib/zmem.c +++ b/arch/xtensa/boot/lib/zmem.c @@ -1,4 +1,4 @@ -#include "zlib.h" +#include /* bits taken from ppc */ @@ -9,11 +9,10 @@ void exit (void) for (;;); } -void *zalloc(void *x, unsigned items, unsigned size) +void *zalloc(unsigned size) { void *p = avail_ram; - size *= items; size = (size + 7) & -8; avail_ram += size; if (avail_ram > end_avail) { @@ -24,11 +23,6 @@ void *zalloc(void *x, unsigned items, unsigned size) return p; } -void zfree(void *x, void *addr, unsigned nb) -{ -} - - #define HEAD_CRC 2 #define EXTRA_FIELD 4 #define ORIG_NAME 8 @@ -43,7 +37,6 @@ void gunzip (void *dst, int dstlen, unsigned char *src, int *lenp) int r, i, flags; /* skip header */ - i = 10; flags = src[3]; if (src[2] != DEFLATED || (flags & RESERVED) != 0) { @@ -65,9 +58,8 @@ void gunzip (void *dst, int dstlen, unsigned char *src, int *lenp) exit(); } - s.zalloc = zalloc; - s.zfree = zfree; - r = inflateInit2(&s, -MAX_WBITS); + s.workspace = zalloc(zlib_inflate_workspacesize()); + r = zlib_inflateInit2(&s, -MAX_WBITS); if (r != Z_OK) { //puts("inflateInit2 returned "); puthex(r); puts("\n"); exit(); @@ -76,12 +68,12 @@ void gunzip (void *dst, int dstlen, unsigned char *src, int *lenp) s.avail_in = *lenp - i; s.next_out = dst; s.avail_out = dstlen; - r = inflate(&s, Z_FINISH); + r = zlib_inflate(&s, Z_FINISH); if (r != Z_OK && r != Z_STREAM_END) { //puts("inflate returned "); puthex(r); puts("\n"); exit(); } *lenp = s.next_out - (unsigned char *) dst; - inflateEnd(&s); + zlib_inflateEnd(&s); } -- cgit v1.2.3