From 9963d1aad40946b1b6d34f9bee8d8a1b9032ae22 Mon Sep 17 00:00:00 2001 From: Rusty Russell Date: Fri, 21 Nov 2008 21:07:16 +1030 Subject: [CPUFREQ] clean up speedstep-centrino and reduce cpumask_t usage Impact: cleanup 1) The #ifdef CONFIG_HOTPLUG_CPU seems unnecessary these days. 2) The loop can simply skip over offline cpus, rather than creating a tmp mask. 3) set_mask is set to either a single cpu or all online cpus in a policy. Since it's just used for set_cpus_allowed(), any offline cpus in a policy don't matter, so we can just use cpumask_of_cpu() or the policy->cpus. Signed-off-by: Rusty Russell Signed-off-by: Mike Travis Signed-off-by: Dave Jones --- arch/x86/kernel/cpu/cpufreq/speedstep-centrino.c | 51 +++++++++++------------- 1 file changed, 24 insertions(+), 27 deletions(-) diff --git a/arch/x86/kernel/cpu/cpufreq/speedstep-centrino.c b/arch/x86/kernel/cpu/cpufreq/speedstep-centrino.c index 3b5f06423e7..f0ea6fa2f53 100644 --- a/arch/x86/kernel/cpu/cpufreq/speedstep-centrino.c +++ b/arch/x86/kernel/cpu/cpufreq/speedstep-centrino.c @@ -459,9 +459,7 @@ static int centrino_verify (struct cpufreq_policy *policy) * Sets a new CPUFreq policy. */ struct allmasks { - cpumask_t online_policy_cpus; cpumask_t saved_mask; - cpumask_t set_mask; cpumask_t covered_cpus; }; @@ -475,9 +473,7 @@ static int centrino_target (struct cpufreq_policy *policy, int retval = 0; unsigned int j, k, first_cpu, tmp; CPUMASK_ALLOC(allmasks); - CPUMASK_PTR(online_policy_cpus, allmasks); CPUMASK_PTR(saved_mask, allmasks); - CPUMASK_PTR(set_mask, allmasks); CPUMASK_PTR(covered_cpus, allmasks); if (unlikely(allmasks == NULL)) @@ -497,30 +493,28 @@ static int centrino_target (struct cpufreq_policy *policy, goto out; } -#ifdef CONFIG_HOTPLUG_CPU - /* cpufreq holds the hotplug lock, so we are safe from here on */ - cpus_and(*online_policy_cpus, cpu_online_map, policy->cpus); -#else - *online_policy_cpus = policy->cpus; -#endif - *saved_mask = current->cpus_allowed; first_cpu = 1; cpus_clear(*covered_cpus); - for_each_cpu_mask_nr(j, *online_policy_cpus) { + for_each_cpu_mask_nr(j, policy->cpus) { + const cpumask_t *mask; + + /* cpufreq holds the hotplug lock, so we are safe here */ + if (!cpu_online(j)) + continue; + /* * Support for SMP systems. * Make sure we are running on CPU that wants to change freq */ - cpus_clear(*set_mask); if (policy->shared_type == CPUFREQ_SHARED_TYPE_ANY) - cpus_or(*set_mask, *set_mask, *online_policy_cpus); + mask = &policy->cpus; else - cpu_set(j, *set_mask); + mask = &cpumask_of_cpu(j); - set_cpus_allowed_ptr(current, set_mask); + set_cpus_allowed_ptr(current, mask); preempt_disable(); - if (unlikely(!cpu_isset(smp_processor_id(), *set_mask))) { + if (unlikely(!cpu_isset(smp_processor_id(), *mask))) { dprintk("couldn't limit to CPUs in this domain\n"); retval = -EAGAIN; if (first_cpu) { @@ -548,7 +542,9 @@ static int centrino_target (struct cpufreq_policy *policy, dprintk("target=%dkHz old=%d new=%d msr=%04x\n", target_freq, freqs.old, freqs.new, msr); - for_each_cpu_mask_nr(k, *online_policy_cpus) { + for_each_cpu_mask_nr(k, policy->cpus) { + if (!cpu_online(k)) + continue; freqs.cpu = k; cpufreq_notify_transition(&freqs, CPUFREQ_PRECHANGE); @@ -571,7 +567,9 @@ static int centrino_target (struct cpufreq_policy *policy, preempt_enable(); } - for_each_cpu_mask_nr(k, *online_policy_cpus) { + for_each_cpu_mask_nr(k, policy->cpus) { + if (!cpu_online(k)) + continue; freqs.cpu = k; cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE); } @@ -584,18 +582,17 @@ static int centrino_target (struct cpufreq_policy *policy, * Best effort undo.. */ - if (!cpus_empty(*covered_cpus)) - for_each_cpu_mask_nr(j, *covered_cpus) { - set_cpus_allowed_ptr(current, - &cpumask_of_cpu(j)); - wrmsr(MSR_IA32_PERF_CTL, oldmsr, h); - } + for_each_cpu_mask_nr(j, *covered_cpus) { + set_cpus_allowed_ptr(current, &cpumask_of_cpu(j)); + wrmsr(MSR_IA32_PERF_CTL, oldmsr, h); + } tmp = freqs.new; freqs.new = freqs.old; freqs.old = tmp; - for_each_cpu_mask_nr(j, *online_policy_cpus) { - freqs.cpu = j; + for_each_cpu_mask_nr(j, policy->cpus) { + if (!cpu_online(j)) + continue; cpufreq_notify_transition(&freqs, CPUFREQ_PRECHANGE); cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE); } -- cgit v1.2.3 From 10db2e5cbda5b4e13d2e2f134b963bee2e129999 Mon Sep 17 00:00:00 2001 From: Dominik Brodowski Date: Fri, 17 Oct 2008 22:52:04 +0200 Subject: [CPUFREQ] p4-clockmod: reduce noise On those CPUs which are SpeedStep (EST) capable, we do not care at all if p4-clockmod does not work, since a technically superior CPU frequency management technology is to be used. Signed-off-by: Dominik Brodowski Signed-off-by: Dave Jones --- arch/x86/kernel/cpu/cpufreq/p4-clockmod.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/arch/x86/kernel/cpu/cpufreq/p4-clockmod.c b/arch/x86/kernel/cpu/cpufreq/p4-clockmod.c index b8e05ee4f73..ba3a94a997c 100644 --- a/arch/x86/kernel/cpu/cpufreq/p4-clockmod.c +++ b/arch/x86/kernel/cpu/cpufreq/p4-clockmod.c @@ -171,7 +171,9 @@ static unsigned int cpufreq_p4_get_frequency(struct cpuinfo_x86 *c) } if (c->x86 != 0xF) { - printk(KERN_WARNING PFX "Unknown p4-clockmod-capable CPU. Please send an e-mail to \n"); + if (!cpu_has(c, X86_FEATURE_EST)) + printk(KERN_WARNING PFX "Unknown p4-clockmod-capable CPU. " + "Please send an e-mail to \n"); return 0; } -- cgit v1.2.3 From e088e4c9cdb618675874becb91b2fd581ee707e6 Mon Sep 17 00:00:00 2001 From: Matthew Garrett Date: Tue, 25 Nov 2008 13:29:47 -0500 Subject: [CPUFREQ] Disable sysfs ui for p4-clockmod. p4-clockmod has a long history of abuse. It pretends to be a CPU frequency scaling driver, even though it doesn't actually change the CPU frequency, but instead just modulates the frequency with wait-states. The biggest misconception is that when running at the lower 'frequency' p4-clockmod is saving power. This isn't the case, as workloads running slower take longer to complete, preventing the CPU from entering deep C states. However p4-clockmod does have a purpose. It can prevent overheating. Having it hooked up to the cpufreq interfaces is the wrong way to achieve cooling however. It should instead be hooked up to ACPI. This diff introduces a means for a cpufreq driver to register with the cpufreq core, but not present a sysfs interface. Signed-off-by: Matthew Garrett Signed-off-by: Dave Jones --- arch/x86/kernel/cpu/cpufreq/p4-clockmod.c | 1 + drivers/cpufreq/cpufreq.c | 51 ++++++++++++++++++++----------- include/linux/cpufreq.h | 1 + 3 files changed, 35 insertions(+), 18 deletions(-) diff --git a/arch/x86/kernel/cpu/cpufreq/p4-clockmod.c b/arch/x86/kernel/cpu/cpufreq/p4-clockmod.c index ba3a94a997c..0c43b224051 100644 --- a/arch/x86/kernel/cpu/cpufreq/p4-clockmod.c +++ b/arch/x86/kernel/cpu/cpufreq/p4-clockmod.c @@ -276,6 +276,7 @@ static struct cpufreq_driver p4clockmod_driver = { .name = "p4-clockmod", .owner = THIS_MODULE, .attr = p4clockmod_attr, + .hide_interface = 1, }; diff --git a/drivers/cpufreq/cpufreq.c b/drivers/cpufreq/cpufreq.c index 31d6f535a79..9044b911d8a 100644 --- a/drivers/cpufreq/cpufreq.c +++ b/drivers/cpufreq/cpufreq.c @@ -754,6 +754,11 @@ static struct kobj_type ktype_cpufreq = { .release = cpufreq_sysfs_release, }; +static struct kobj_type ktype_empty_cpufreq = { + .sysfs_ops = &sysfs_ops, + .release = cpufreq_sysfs_release, +}; + /** * cpufreq_add_dev - add a CPU device @@ -876,26 +881,36 @@ static int cpufreq_add_dev(struct sys_device *sys_dev) memcpy(&new_policy, policy, sizeof(struct cpufreq_policy)); /* prepare interface data */ - ret = kobject_init_and_add(&policy->kobj, &ktype_cpufreq, &sys_dev->kobj, - "cpufreq"); - if (ret) - goto err_out_driver_exit; - - /* set up files for this cpu device */ - drv_attr = cpufreq_driver->attr; - while ((drv_attr) && (*drv_attr)) { - ret = sysfs_create_file(&policy->kobj, &((*drv_attr)->attr)); + if (!cpufreq_driver->hide_interface) { + ret = kobject_init_and_add(&policy->kobj, &ktype_cpufreq, + &sys_dev->kobj, "cpufreq"); if (ret) goto err_out_driver_exit; - drv_attr++; - } - if (cpufreq_driver->get) { - ret = sysfs_create_file(&policy->kobj, &cpuinfo_cur_freq.attr); - if (ret) - goto err_out_driver_exit; - } - if (cpufreq_driver->target) { - ret = sysfs_create_file(&policy->kobj, &scaling_cur_freq.attr); + + /* set up files for this cpu device */ + drv_attr = cpufreq_driver->attr; + while ((drv_attr) && (*drv_attr)) { + ret = sysfs_create_file(&policy->kobj, + &((*drv_attr)->attr)); + if (ret) + goto err_out_driver_exit; + drv_attr++; + } + if (cpufreq_driver->get) { + ret = sysfs_create_file(&policy->kobj, + &cpuinfo_cur_freq.attr); + if (ret) + goto err_out_driver_exit; + } + if (cpufreq_driver->target) { + ret = sysfs_create_file(&policy->kobj, + &scaling_cur_freq.attr); + if (ret) + goto err_out_driver_exit; + } + } else { + ret = kobject_init_and_add(&policy->kobj, &ktype_empty_cpufreq, + &sys_dev->kobj, "cpufreq"); if (ret) goto err_out_driver_exit; } diff --git a/include/linux/cpufreq.h b/include/linux/cpufreq.h index 1ee608fd7b7..484b3abf61b 100644 --- a/include/linux/cpufreq.h +++ b/include/linux/cpufreq.h @@ -234,6 +234,7 @@ struct cpufreq_driver { int (*suspend) (struct cpufreq_policy *policy, pm_message_t pmsg); int (*resume) (struct cpufreq_policy *policy); struct freq_attr **attr; + bool hide_interface; }; /* flags */ -- cgit v1.2.3 From c60e19eb21d9a0fb0d78969884f32d88354abca9 Mon Sep 17 00:00:00 2001 From: Herton Ronaldo Krzesinski Date: Sat, 15 Nov 2008 17:02:46 -0200 Subject: [CPUFREQ] add to speedstep-lib additional fsb values for core processors Add additional fsb values to pentium_core_get_frequency, from latest edition (September 2008) of Intel 64 and IA-32 Architectures Software Develper's Manual, Volume 3B: System Programming Guide, Part 2. Values added are to detect 800, 1067 and 1333 FSB types. Signed-off-by: Herton Ronaldo Krzesinski Signed-off-by: Dave Jones --- arch/x86/kernel/cpu/cpufreq/speedstep-lib.c | 9 +++++++++ 1 file changed, 9 insertions(+) diff --git a/arch/x86/kernel/cpu/cpufreq/speedstep-lib.c b/arch/x86/kernel/cpu/cpufreq/speedstep-lib.c index 98d4fdb7dc0..cdac7d62369 100644 --- a/arch/x86/kernel/cpu/cpufreq/speedstep-lib.c +++ b/arch/x86/kernel/cpu/cpufreq/speedstep-lib.c @@ -139,6 +139,15 @@ static unsigned int pentium_core_get_frequency(void) case 3: fsb = 166667; break; + case 2: + fsb = 200000; + break; + case 0: + fsb = 266667; + break; + case 4: + fsb = 333333; + break; default: printk(KERN_ERR "PCORE - MSR_FSB_FREQ undefined value"); } -- cgit v1.2.3 From 8529154ec3f3ac20344c65b7a040c604c7af7651 Mon Sep 17 00:00:00 2001 From: Herton Ronaldo Krzesinski Date: Sat, 15 Nov 2008 17:02:46 -0200 Subject: [CPUFREQ] Add Celeron Core support to p4-clockmod. Add Celeron Core support to p4-clockmod. Signed-off-by: Herton Ronaldo Krzesinski Signed-off-by: Dave Jones --- arch/x86/kernel/cpu/cpufreq/p4-clockmod.c | 1 + 1 file changed, 1 insertion(+) diff --git a/arch/x86/kernel/cpu/cpufreq/p4-clockmod.c b/arch/x86/kernel/cpu/cpufreq/p4-clockmod.c index 0c43b224051..beea4466b06 100644 --- a/arch/x86/kernel/cpu/cpufreq/p4-clockmod.c +++ b/arch/x86/kernel/cpu/cpufreq/p4-clockmod.c @@ -160,6 +160,7 @@ static unsigned int cpufreq_p4_get_frequency(struct cpuinfo_x86 *c) switch (c->x86_model) { case 0x0E: /* Core */ case 0x0F: /* Core Duo */ + case 0x16: /* Celeron Core */ p4clockmod_driver.flags |= CPUFREQ_CONST_LOOPS; return speedstep_get_processor_frequency(SPEEDSTEP_PROCESSOR_PCORE); case 0x0D: /* Pentium M (Dothan) */ -- cgit v1.2.3 From 187d9f4ed4fc089f1f25a875fb485e27626972f9 Mon Sep 17 00:00:00 2001 From: Mike Chan Date: Thu, 4 Dec 2008 12:19:17 -0800 Subject: [CPUFREQ] Fix on resume, now preserves user policy min/max. Previously driver resume would always set the current policy min/max with the cpuinfo min/max, defined by user_policy.min/max. Resulting in a reset of policy settings when policy.min/max != cpuinfo.min/max when coming out of suspend. Now user_policy is saved as the policy instead of cpuinfo to preserve what the user actually set. Signed-off-by: Mike Chan Signed-off-by: Dave Jones --- drivers/cpufreq/cpufreq.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/cpufreq/cpufreq.c b/drivers/cpufreq/cpufreq.c index 9044b911d8a..01dde80597f 100644 --- a/drivers/cpufreq/cpufreq.c +++ b/drivers/cpufreq/cpufreq.c @@ -827,8 +827,8 @@ static int cpufreq_add_dev(struct sys_device *sys_dev) dprintk("initialization failed\n"); goto err_out; } - policy->user_policy.min = policy->cpuinfo.min_freq; - policy->user_policy.max = policy->cpuinfo.max_freq; + policy->user_policy.min = policy->min; + policy->user_policy.max = policy->max; blocking_notifier_call_chain(&cpufreq_policy_notifier_list, CPUFREQ_START, policy); -- cgit v1.2.3