From 02cdad3f932d533e5cbde1b15092418ce7af1a70 Mon Sep 17 00:00:00 2001 From: Dimitry Andric Date: Tue, 26 Jul 2005 19:20:25 +0100 Subject: [PATCH] ARM: 2819/1: Fix several S3C24x0 IIS defines Patch from Dimitry Andric - Change S3C2440_IISCON_MPLL to S3C2440_IISMOD_MPLL: The S3C2440 IISCON register doesn\'t control the master clock selection, this is done with the IISMOD register. - Correct S3C2410_IISMOD_256FS and S3C2410_IISMOD_384FS: This is set via bit 2 of IISMOD, not bit 1. - Add S3C2410_IISCON_PSCEN (prescaler enable), for completeness\' sake. Signed-off-by: Dimitry Andric Signed-off-by: Ben Dooks Signed-off-by: Russell King --- include/asm-arm/arch-s3c2410/regs-iis.h | 10 +++++++--- 1 file changed, 7 insertions(+), 3 deletions(-) diff --git a/include/asm-arm/arch-s3c2410/regs-iis.h b/include/asm-arm/arch-s3c2410/regs-iis.h index 385b07d510d..fdd62e8cd6c 100644 --- a/include/asm-arm/arch-s3c2410/regs-iis.h +++ b/include/asm-arm/arch-s3c2410/regs-iis.h @@ -15,6 +15,9 @@ * 12-03-2004 BJD Updated include protection * 07-03-2005 BJD Added FIFO size flags and S3C2440 MPLL * 05-04-2005 LCVR Added IISFCON definitions for the S3C2400 + * 18-07-2005 DA Change IISCON_MPLL to IISMOD_MPLL + * Correct IISMOD_256FS and IISMOD_384FS + * Add IISCON_PSCEN */ #ifndef __ASM_ARCH_REGS_IIS_H @@ -22,7 +25,6 @@ #define S3C2410_IISCON (0x00) -#define S3C2440_IISCON_MPLL (1<<9) #define S3C2410_IISCON_LRINDEX (1<<8) #define S3C2410_IISCON_TXFIFORDY (1<<7) #define S3C2410_IISCON_RXFIFORDY (1<<6) @@ -30,10 +32,12 @@ #define S3C2410_IISCON_RXDMAEN (1<<4) #define S3C2410_IISCON_TXIDLE (1<<3) #define S3C2410_IISCON_RXIDLE (1<<2) +#define S3C2410_IISCON_PSCEN (1<<1) #define S3C2410_IISCON_IISEN (1<<0) #define S3C2410_IISMOD (0x04) +#define S3C2440_IISMOD_MPLL (1<<9) #define S3C2410_IISMOD_SLAVE (1<<8) #define S3C2410_IISMOD_NOXFER (0<<6) #define S3C2410_IISMOD_RXMODE (1<<6) @@ -46,8 +50,8 @@ #define S3C2410_IISMOD_8BIT (0<<3) #define S3C2410_IISMOD_16BIT (1<<3) #define S3C2410_IISMOD_BITMASK (1<<3) -#define S3C2410_IISMOD_256FS (0<<1) -#define S3C2410_IISMOD_384FS (1<<1) +#define S3C2410_IISMOD_256FS (0<<2) +#define S3C2410_IISMOD_384FS (1<<2) #define S3C2410_IISMOD_16FS (0<<0) #define S3C2410_IISMOD_32FS (1<<0) #define S3C2410_IISMOD_48FS (2<<0) -- cgit v1.2.3 From 5730b7d6529e6e894ee3c2e1c68125c0532ad394 Mon Sep 17 00:00:00 2001 From: Ben Dooks Date: Tue, 26 Jul 2005 19:20:26 +0100 Subject: [PATCH] ARM: 2828/1: BAST - remove static map of ASIX area Patch from Ben Dooks There is no point in mapping this staticaly, the driver is going to ioremap() the area as it sees fit. Also correct the dates on the changelog comments Signed-off-by: Ben Dooks Signed-off-by: Russell King --- arch/arm/mach-s3c2410/mach-bast.c | 13 +++++-------- 1 file changed, 5 insertions(+), 8 deletions(-) diff --git a/arch/arm/mach-s3c2410/mach-bast.c b/arch/arm/mach-s3c2410/mach-bast.c index 206778ebfce..1e7f343822d 100644 --- a/arch/arm/mach-s3c2410/mach-bast.c +++ b/arch/arm/mach-s3c2410/mach-bast.c @@ -25,10 +25,11 @@ * 14-Jan-2005 BJD Add support for muitlple NAND devices * 03-Mar-2005 BJD Ensured that bast-cpld.h is included * 10-Mar-2005 LCVR Changed S3C2410_VA to S3C24XX_VA - * 14-Mar-2006 BJD Updated for __iomem changes - * 22-Jun-2006 BJD Added DM9000 platform information - * 28-Jun-2006 BJD Moved pm functionality out to common code - * 17-Jul-2006 BJD Changed to platform device for SuperIO 16550s + * 14-Mar-2005 BJD Updated for __iomem changes + * 22-Jun-2005 BJD Added DM9000 platform information + * 28-Jun-2005 BJD Moved pm functionality out to common code + * 17-Jul-2005 BJD Changed to platform device for SuperIO 16550s + * 25-Jul-2005 BJD Removed ASIX static mappings */ #include @@ -116,7 +117,6 @@ static struct map_desc bast_iodesc[] __initdata = { /* slow, byte */ { VA_C2(BAST_VA_ISAIO), PA_CS2(BAST_PA_ISAIO), SZ_16M, MT_DEVICE }, { VA_C2(BAST_VA_ISAMEM), PA_CS2(BAST_PA_ISAMEM), SZ_16M, MT_DEVICE }, - { VA_C2(BAST_VA_ASIXNET), PA_CS3(BAST_PA_ASIXNET), SZ_1M, MT_DEVICE }, { VA_C2(BAST_VA_SUPERIO), PA_CS2(BAST_PA_SUPERIO), SZ_1M, MT_DEVICE }, { VA_C2(BAST_VA_IDEPRI), PA_CS3(BAST_PA_IDEPRI), SZ_1M, MT_DEVICE }, { VA_C2(BAST_VA_IDESEC), PA_CS3(BAST_PA_IDESEC), SZ_1M, MT_DEVICE }, @@ -126,7 +126,6 @@ static struct map_desc bast_iodesc[] __initdata = { /* slow, word */ { VA_C3(BAST_VA_ISAIO), PA_CS3(BAST_PA_ISAIO), SZ_16M, MT_DEVICE }, { VA_C3(BAST_VA_ISAMEM), PA_CS3(BAST_PA_ISAMEM), SZ_16M, MT_DEVICE }, - { VA_C3(BAST_VA_ASIXNET), PA_CS3(BAST_PA_ASIXNET), SZ_1M, MT_DEVICE }, { VA_C3(BAST_VA_SUPERIO), PA_CS3(BAST_PA_SUPERIO), SZ_1M, MT_DEVICE }, { VA_C3(BAST_VA_IDEPRI), PA_CS3(BAST_PA_IDEPRI), SZ_1M, MT_DEVICE }, { VA_C3(BAST_VA_IDESEC), PA_CS3(BAST_PA_IDESEC), SZ_1M, MT_DEVICE }, @@ -136,7 +135,6 @@ static struct map_desc bast_iodesc[] __initdata = { /* fast, byte */ { VA_C4(BAST_VA_ISAIO), PA_CS4(BAST_PA_ISAIO), SZ_16M, MT_DEVICE }, { VA_C4(BAST_VA_ISAMEM), PA_CS4(BAST_PA_ISAMEM), SZ_16M, MT_DEVICE }, - { VA_C4(BAST_VA_ASIXNET), PA_CS5(BAST_PA_ASIXNET), SZ_1M, MT_DEVICE }, { VA_C4(BAST_VA_SUPERIO), PA_CS4(BAST_PA_SUPERIO), SZ_1M, MT_DEVICE }, { VA_C4(BAST_VA_IDEPRI), PA_CS5(BAST_PA_IDEPRI), SZ_1M, MT_DEVICE }, { VA_C4(BAST_VA_IDESEC), PA_CS5(BAST_PA_IDESEC), SZ_1M, MT_DEVICE }, @@ -146,7 +144,6 @@ static struct map_desc bast_iodesc[] __initdata = { /* fast, word */ { VA_C5(BAST_VA_ISAIO), PA_CS5(BAST_PA_ISAIO), SZ_16M, MT_DEVICE }, { VA_C5(BAST_VA_ISAMEM), PA_CS5(BAST_PA_ISAMEM), SZ_16M, MT_DEVICE }, - { VA_C5(BAST_VA_ASIXNET), PA_CS5(BAST_PA_ASIXNET), SZ_1M, MT_DEVICE }, { VA_C5(BAST_VA_SUPERIO), PA_CS5(BAST_PA_SUPERIO), SZ_1M, MT_DEVICE }, { VA_C5(BAST_VA_IDEPRI), PA_CS5(BAST_PA_IDEPRI), SZ_1M, MT_DEVICE }, { VA_C5(BAST_VA_IDESEC), PA_CS5(BAST_PA_IDESEC), SZ_1M, MT_DEVICE }, -- cgit v1.2.3 From 7fcc113c3021a42db90e1ad27a7bec267b6e13e3 Mon Sep 17 00:00:00 2001 From: Ben Dooks Date: Tue, 26 Jul 2005 19:20:27 +0100 Subject: [PATCH] ARM: 2829/1: S3C2410 - split s3c2440 irq specifics from core irq.c Patch from Ben Dooks Remove the need for the #ifdefs and place the IRQ handling code for the s3c2440 into a new file, which is only compiled when the s3c2440 cpu support is enabled. Signed-off-by: Ben Dooks Signed-off-by: Russell King --- arch/arm/mach-s3c2410/Makefile | 1 + arch/arm/mach-s3c2410/irq.c | 260 +----------------------------------- arch/arm/mach-s3c2410/irq.h | 99 ++++++++++++++ arch/arm/mach-s3c2410/s3c2440-irq.c | 207 ++++++++++++++++++++++++++++ 4 files changed, 312 insertions(+), 255 deletions(-) create mode 100644 arch/arm/mach-s3c2410/irq.h create mode 100644 arch/arm/mach-s3c2410/s3c2440-irq.c diff --git a/arch/arm/mach-s3c2410/Makefile b/arch/arm/mach-s3c2410/Makefile index f99b689e439..dabb605c1d7 100644 --- a/arch/arm/mach-s3c2410/Makefile +++ b/arch/arm/mach-s3c2410/Makefile @@ -23,6 +23,7 @@ obj-$(CONFIG_PM_SIMTEC) += pm-simtec.o # S3C2440 support obj-$(CONFIG_CPU_S3C2440) += s3c2440.o s3c2440-dsc.o +obj-$(CONFIG_CPU_S3C2440) += s3c2440-irq.o # machine specific support diff --git a/arch/arm/mach-s3c2410/irq.c b/arch/arm/mach-s3c2410/irq.c index cf9f46d8806..973a5fe6769 100644 --- a/arch/arm/mach-s3c2410/irq.c +++ b/arch/arm/mach-s3c2410/irq.c @@ -45,6 +45,9 @@ * * 28-Jun-2005 Ben Dooks * Mark IRQ_LCD valid + * + * 25-Jul-2005 Ben Dooks + * Split the S3C2440 IRQ code to seperate file */ #include @@ -65,11 +68,7 @@ #include "cpu.h" #include "pm.h" - -#define irqdbf(x...) -#define irqdbf2(x...) - -#define EXTINT_OFF (IRQ_EINT4 - 4) +#include "irq.h" /* wakeup irq control */ @@ -181,7 +180,7 @@ s3c_irq_unmask(unsigned int irqno) __raw_writel(mask, S3C2410_INTMSK); } -static struct irqchip s3c_irq_level_chip = { +struct irqchip s3c_irq_level_chip = { .ack = s3c_irq_maskack, .mask = s3c_irq_mask, .unmask = s3c_irq_unmask, @@ -370,84 +369,6 @@ static struct irqchip s3c_irq_eint0t4 = { #define INTMSK_UART2 (1UL << (IRQ_UART2 - IRQ_EINT0)) #define INTMSK_ADCPARENT (1UL << (IRQ_ADCPARENT - IRQ_EINT0)) -static inline void -s3c_irqsub_mask(unsigned int irqno, unsigned int parentbit, - int subcheck) -{ - unsigned long mask; - unsigned long submask; - - submask = __raw_readl(S3C2410_INTSUBMSK); - mask = __raw_readl(S3C2410_INTMSK); - - submask |= (1UL << (irqno - IRQ_S3CUART_RX0)); - - /* check to see if we need to mask the parent IRQ */ - - if ((submask & subcheck) == subcheck) { - __raw_writel(mask | parentbit, S3C2410_INTMSK); - } - - /* write back masks */ - __raw_writel(submask, S3C2410_INTSUBMSK); - -} - -static inline void -s3c_irqsub_unmask(unsigned int irqno, unsigned int parentbit) -{ - unsigned long mask; - unsigned long submask; - - submask = __raw_readl(S3C2410_INTSUBMSK); - mask = __raw_readl(S3C2410_INTMSK); - - submask &= ~(1UL << (irqno - IRQ_S3CUART_RX0)); - mask &= ~parentbit; - - /* write back masks */ - __raw_writel(submask, S3C2410_INTSUBMSK); - __raw_writel(mask, S3C2410_INTMSK); -} - - -static inline void -s3c_irqsub_maskack(unsigned int irqno, unsigned int parentmask, unsigned int group) -{ - unsigned int bit = 1UL << (irqno - IRQ_S3CUART_RX0); - - s3c_irqsub_mask(irqno, parentmask, group); - - __raw_writel(bit, S3C2410_SUBSRCPND); - - /* only ack parent if we've got all the irqs (seems we must - * ack, all and hope that the irq system retriggers ok when - * the interrupt goes off again) - */ - - if (1) { - __raw_writel(parentmask, S3C2410_SRCPND); - __raw_writel(parentmask, S3C2410_INTPND); - } -} - -static inline void -s3c_irqsub_ack(unsigned int irqno, unsigned int parentmask, unsigned int group) -{ - unsigned int bit = 1UL << (irqno - IRQ_S3CUART_RX0); - - __raw_writel(bit, S3C2410_SUBSRCPND); - - /* only ack parent if we've got all the irqs (seems we must - * ack, all and hope that the irq system retriggers ok when - * the interrupt goes off again) - */ - - if (1) { - __raw_writel(parentmask, S3C2410_SRCPND); - __raw_writel(parentmask, S3C2410_INTPND); - } -} /* UART0 */ @@ -794,174 +715,3 @@ void __init s3c24xx_init_irq(void) irqdbf("s3c2410: registered interrupt handlers\n"); } - -/* s3c2440 irq code -*/ - -#ifdef CONFIG_CPU_S3C2440 - -/* WDT/AC97 */ - -static void s3c_irq_demux_wdtac97(unsigned int irq, - struct irqdesc *desc, - struct pt_regs *regs) -{ - unsigned int subsrc, submsk; - struct irqdesc *mydesc; - - /* read the current pending interrupts, and the mask - * for what it is available */ - - subsrc = __raw_readl(S3C2410_SUBSRCPND); - submsk = __raw_readl(S3C2410_INTSUBMSK); - - subsrc &= ~submsk; - subsrc >>= 13; - subsrc &= 3; - - if (subsrc != 0) { - if (subsrc & 1) { - mydesc = irq_desc + IRQ_S3C2440_WDT; - mydesc->handle( IRQ_S3C2440_WDT, mydesc, regs); - } - if (subsrc & 2) { - mydesc = irq_desc + IRQ_S3C2440_AC97; - mydesc->handle(IRQ_S3C2440_AC97, mydesc, regs); - } - } -} - - -#define INTMSK_WDT (1UL << (IRQ_WDT - IRQ_EINT0)) - -static void -s3c_irq_wdtac97_mask(unsigned int irqno) -{ - s3c_irqsub_mask(irqno, INTMSK_WDT, 3<<13); -} - -static void -s3c_irq_wdtac97_unmask(unsigned int irqno) -{ - s3c_irqsub_unmask(irqno, INTMSK_WDT); -} - -static void -s3c_irq_wdtac97_ack(unsigned int irqno) -{ - s3c_irqsub_maskack(irqno, INTMSK_WDT, 3<<13); -} - -static struct irqchip s3c_irq_wdtac97 = { - .mask = s3c_irq_wdtac97_mask, - .unmask = s3c_irq_wdtac97_unmask, - .ack = s3c_irq_wdtac97_ack, -}; - -/* camera irq */ - -static void s3c_irq_demux_cam(unsigned int irq, - struct irqdesc *desc, - struct pt_regs *regs) -{ - unsigned int subsrc, submsk; - struct irqdesc *mydesc; - - /* read the current pending interrupts, and the mask - * for what it is available */ - - subsrc = __raw_readl(S3C2410_SUBSRCPND); - submsk = __raw_readl(S3C2410_INTSUBMSK); - - subsrc &= ~submsk; - subsrc >>= 11; - subsrc &= 3; - - if (subsrc != 0) { - if (subsrc & 1) { - mydesc = irq_desc + IRQ_S3C2440_CAM_C; - mydesc->handle( IRQ_S3C2440_WDT, mydesc, regs); - } - if (subsrc & 2) { - mydesc = irq_desc + IRQ_S3C2440_CAM_P; - mydesc->handle(IRQ_S3C2440_AC97, mydesc, regs); - } - } -} - -#define INTMSK_CAM (1UL << (IRQ_CAM - IRQ_EINT0)) - -static void -s3c_irq_cam_mask(unsigned int irqno) -{ - s3c_irqsub_mask(irqno, INTMSK_CAM, 3<<11); -} - -static void -s3c_irq_cam_unmask(unsigned int irqno) -{ - s3c_irqsub_unmask(irqno, INTMSK_CAM); -} - -static void -s3c_irq_cam_ack(unsigned int irqno) -{ - s3c_irqsub_maskack(irqno, INTMSK_CAM, 3<<11); -} - -static struct irqchip s3c_irq_cam = { - .mask = s3c_irq_cam_mask, - .unmask = s3c_irq_cam_unmask, - .ack = s3c_irq_cam_ack, -}; - -static int s3c2440_irq_add(struct sys_device *sysdev) -{ - unsigned int irqno; - - printk("S3C2440: IRQ Support\n"); - - set_irq_chip(IRQ_NFCON, &s3c_irq_level_chip); - set_irq_handler(IRQ_NFCON, do_level_IRQ); - set_irq_flags(IRQ_NFCON, IRQF_VALID); - - /* add new chained handler for wdt, ac7 */ - - set_irq_chip(IRQ_WDT, &s3c_irq_level_chip); - set_irq_handler(IRQ_WDT, do_level_IRQ); - set_irq_chained_handler(IRQ_WDT, s3c_irq_demux_wdtac97); - - for (irqno = IRQ_S3C2440_WDT; irqno <= IRQ_S3C2440_AC97; irqno++) { - set_irq_chip(irqno, &s3c_irq_wdtac97); - set_irq_handler(irqno, do_level_IRQ); - set_irq_flags(irqno, IRQF_VALID); - } - - /* add chained handler for camera */ - - set_irq_chip(IRQ_CAM, &s3c_irq_level_chip); - set_irq_handler(IRQ_CAM, do_level_IRQ); - set_irq_chained_handler(IRQ_CAM, s3c_irq_demux_cam); - - for (irqno = IRQ_S3C2440_CAM_C; irqno <= IRQ_S3C2440_CAM_P; irqno++) { - set_irq_chip(irqno, &s3c_irq_cam); - set_irq_handler(irqno, do_level_IRQ); - set_irq_flags(irqno, IRQF_VALID); - } - - return 0; -} - -static struct sysdev_driver s3c2440_irq_driver = { - .add = s3c2440_irq_add, -}; - -static int s3c24xx_irq_driver(void) -{ - return sysdev_driver_register(&s3c2440_sysclass, &s3c2440_irq_driver); -} - -arch_initcall(s3c24xx_irq_driver); - -#endif /* CONFIG_CPU_S3C2440 */ - diff --git a/arch/arm/mach-s3c2410/irq.h b/arch/arm/mach-s3c2410/irq.h new file mode 100644 index 00000000000..4abf0ca14e0 --- /dev/null +++ b/arch/arm/mach-s3c2410/irq.h @@ -0,0 +1,99 @@ +/* arch/arm/mach-s3c2410/irq.h + * + * Copyright (c) 2004-2005 Simtec Electronics + * Ben Dooks + * + * Header file for S3C24XX CPU IRQ support + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * Modifications: +*/ + +#define irqdbf(x...) +#define irqdbf2(x...) + +#define EXTINT_OFF (IRQ_EINT4 - 4) + +extern struct irqchip s3c_irq_level_chip; + +static inline void +s3c_irqsub_mask(unsigned int irqno, unsigned int parentbit, + int subcheck) +{ + unsigned long mask; + unsigned long submask; + + submask = __raw_readl(S3C2410_INTSUBMSK); + mask = __raw_readl(S3C2410_INTMSK); + + submask |= (1UL << (irqno - IRQ_S3CUART_RX0)); + + /* check to see if we need to mask the parent IRQ */ + + if ((submask & subcheck) == subcheck) { + __raw_writel(mask | parentbit, S3C2410_INTMSK); + } + + /* write back masks */ + __raw_writel(submask, S3C2410_INTSUBMSK); + +} + +static inline void +s3c_irqsub_unmask(unsigned int irqno, unsigned int parentbit) +{ + unsigned long mask; + unsigned long submask; + + submask = __raw_readl(S3C2410_INTSUBMSK); + mask = __raw_readl(S3C2410_INTMSK); + + submask &= ~(1UL << (irqno - IRQ_S3CUART_RX0)); + mask &= ~parentbit; + + /* write back masks */ + __raw_writel(submask, S3C2410_INTSUBMSK); + __raw_writel(mask, S3C2410_INTMSK); +} + + +static inline void +s3c_irqsub_maskack(unsigned int irqno, unsigned int parentmask, unsigned int group) +{ + unsigned int bit = 1UL << (irqno - IRQ_S3CUART_RX0); + + s3c_irqsub_mask(irqno, parentmask, group); + + __raw_writel(bit, S3C2410_SUBSRCPND); + + /* only ack parent if we've got all the irqs (seems we must + * ack, all and hope that the irq system retriggers ok when + * the interrupt goes off again) + */ + + if (1) { + __raw_writel(parentmask, S3C2410_SRCPND); + __raw_writel(parentmask, S3C2410_INTPND); + } +} + +static inline void +s3c_irqsub_ack(unsigned int irqno, unsigned int parentmask, unsigned int group) +{ + unsigned int bit = 1UL << (irqno - IRQ_S3CUART_RX0); + + __raw_writel(bit, S3C2410_SUBSRCPND); + + /* only ack parent if we've got all the irqs (seems we must + * ack, all and hope that the irq system retriggers ok when + * the interrupt goes off again) + */ + + if (1) { + __raw_writel(parentmask, S3C2410_SRCPND); + __raw_writel(parentmask, S3C2410_INTPND); + } +} diff --git a/arch/arm/mach-s3c2410/s3c2440-irq.c b/arch/arm/mach-s3c2410/s3c2440-irq.c new file mode 100644 index 00000000000..7cb9912242a --- /dev/null +++ b/arch/arm/mach-s3c2410/s3c2440-irq.c @@ -0,0 +1,207 @@ +/* linux/arch/arm/mach-s3c2410/s3c2440-irq.c + * + * Copyright (c) 2003,2004 Simtec Electronics + * Ben Dooks + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + * + * Changelog: + * 25-Jul-2005 BJD Split from irq.c + * +*/ + +#include +#include +#include +#include +#include +#include + +#include +#include +#include + +#include + +#include +#include + +#include "cpu.h" +#include "pm.h" +#include "irq.h" + +/* WDT/AC97 */ + +static void s3c_irq_demux_wdtac97(unsigned int irq, + struct irqdesc *desc, + struct pt_regs *regs) +{ + unsigned int subsrc, submsk; + struct irqdesc *mydesc; + + /* read the current pending interrupts, and the mask + * for what it is available */ + + subsrc = __raw_readl(S3C2410_SUBSRCPND); + submsk = __raw_readl(S3C2410_INTSUBMSK); + + subsrc &= ~submsk; + subsrc >>= 13; + subsrc &= 3; + + if (subsrc != 0) { + if (subsrc & 1) { + mydesc = irq_desc + IRQ_S3C2440_WDT; + mydesc->handle( IRQ_S3C2440_WDT, mydesc, regs); + } + if (subsrc & 2) { + mydesc = irq_desc + IRQ_S3C2440_AC97; + mydesc->handle(IRQ_S3C2440_AC97, mydesc, regs); + } + } +} + + +#define INTMSK_WDT (1UL << (IRQ_WDT - IRQ_EINT0)) + +static void +s3c_irq_wdtac97_mask(unsigned int irqno) +{ + s3c_irqsub_mask(irqno, INTMSK_WDT, 3<<13); +} + +static void +s3c_irq_wdtac97_unmask(unsigned int irqno) +{ + s3c_irqsub_unmask(irqno, INTMSK_WDT); +} + +static void +s3c_irq_wdtac97_ack(unsigned int irqno) +{ + s3c_irqsub_maskack(irqno, INTMSK_WDT, 3<<13); +} + +static struct irqchip s3c_irq_wdtac97 = { + .mask = s3c_irq_wdtac97_mask, + .unmask = s3c_irq_wdtac97_unmask, + .ack = s3c_irq_wdtac97_ack, +}; + +/* camera irq */ + +static void s3c_irq_demux_cam(unsigned int irq, + struct irqdesc *desc, + struct pt_regs *regs) +{ + unsigned int subsrc, submsk; + struct irqdesc *mydesc; + + /* read the current pending interrupts, and the mask + * for what it is available */ + + subsrc = __raw_readl(S3C2410_SUBSRCPND); + submsk = __raw_readl(S3C2410_INTSUBMSK); + + subsrc &= ~submsk; + subsrc >>= 11; + subsrc &= 3; + + if (subsrc != 0) { + if (subsrc & 1) { + mydesc = irq_desc + IRQ_S3C2440_CAM_C; + mydesc->handle( IRQ_S3C2440_WDT, mydesc, regs); + } + if (subsrc & 2) { + mydesc = irq_desc + IRQ_S3C2440_CAM_P; + mydesc->handle(IRQ_S3C2440_AC97, mydesc, regs); + } + } +} + +#define INTMSK_CAM (1UL << (IRQ_CAM - IRQ_EINT0)) + +static void +s3c_irq_cam_mask(unsigned int irqno) +{ + s3c_irqsub_mask(irqno, INTMSK_CAM, 3<<11); +} + +static void +s3c_irq_cam_unmask(unsigned int irqno) +{ + s3c_irqsub_unmask(irqno, INTMSK_CAM); +} + +static void +s3c_irq_cam_ack(unsigned int irqno) +{ + s3c_irqsub_maskack(irqno, INTMSK_CAM, 3<<11); +} + +static struct irqchip s3c_irq_cam = { + .mask = s3c_irq_cam_mask, + .unmask = s3c_irq_cam_unmask, + .ack = s3c_irq_cam_ack, +}; + +static int s3c2440_irq_add(struct sys_device *sysdev) +{ + unsigned int irqno; + + printk("S3C2440: IRQ Support\n"); + + set_irq_chip(IRQ_NFCON, &s3c_irq_level_chip); + set_irq_handler(IRQ_NFCON, do_level_IRQ); + set_irq_flags(IRQ_NFCON, IRQF_VALID); + + /* add new chained handler for wdt, ac7 */ + + set_irq_chip(IRQ_WDT, &s3c_irq_level_chip); + set_irq_handler(IRQ_WDT, do_level_IRQ); + set_irq_chained_handler(IRQ_WDT, s3c_irq_demux_wdtac97); + + for (irqno = IRQ_S3C2440_WDT; irqno <= IRQ_S3C2440_AC97; irqno++) { + set_irq_chip(irqno, &s3c_irq_wdtac97); + set_irq_handler(irqno, do_level_IRQ); + set_irq_flags(irqno, IRQF_VALID); + } + + /* add chained handler for camera */ + + set_irq_chip(IRQ_CAM, &s3c_irq_level_chip); + set_irq_handler(IRQ_CAM, do_level_IRQ); + set_irq_chained_handler(IRQ_CAM, s3c_irq_demux_cam); + + for (irqno = IRQ_S3C2440_CAM_C; irqno <= IRQ_S3C2440_CAM_P; irqno++) { + set_irq_chip(irqno, &s3c_irq_cam); + set_irq_handler(irqno, do_level_IRQ); + set_irq_flags(irqno, IRQF_VALID); + } + + return 0; +} + +static struct sysdev_driver s3c2440_irq_driver = { + .add = s3c2440_irq_add, +}; + +static int s3c24xx_irq_driver(void) +{ + return sysdev_driver_register(&s3c2440_sysclass, &s3c2440_irq_driver); +} + +arch_initcall(s3c24xx_irq_driver); + -- cgit v1.2.3 From 821ca478867433502fc614b4be83e0362cd7e67e Mon Sep 17 00:00:00 2001 From: Michael Gernoth Date: Tue, 26 Jul 2005 19:21:47 +0100 Subject: [PATCH] ARM: 2830/1: Fix Jornada 720 PCMCIA-support Patch from Michael Gernoth This patch lets the Jornada 720 PCMCIA-driver compile again. The resulting driver has been tested on a Jornada with a CF-card, which was mounted and accessed successfully. Signed-off-by: Michael Gernoth Signed-off-by: Russell King --- drivers/pcmcia/sa1100_jornada720.c | 19 ++++--------------- 1 file changed, 4 insertions(+), 15 deletions(-) diff --git a/drivers/pcmcia/sa1100_jornada720.c b/drivers/pcmcia/sa1100_jornada720.c index 0a387106acb..7a87298bae9 100644 --- a/drivers/pcmcia/sa1100_jornada720.c +++ b/drivers/pcmcia/sa1100_jornada720.c @@ -30,20 +30,9 @@ static int jornada720_pcmcia_hw_init(struct soc_pcmcia_socket *skt) */ GRER |= 0x00000002; /* Set GPIO_A<3:1> to be outputs for PCMCIA/CF power controller: */ - PA_DDR = 0; - PA_DWR = 0; - PA_SDR = 0; - PA_SSR = 0; - - PB_DDR = 0; - PB_DWR = 0x01; - PB_SDR = 0; - PB_SSR = 0; - - PC_DDR = 0x88; - PC_DWR = 0x20; - PC_SDR = 0; - PC_SSR = 0; + sa1111_set_io_dir(SA1111_DEV(skt->dev), GPIO_A0|GPIO_A1|GPIO_A2|GPIO_A3, 0, 0); + sa1111_set_io(SA1111_DEV(skt->dev), GPIO_A0|GPIO_A1|GPIO_A2|GPIO_A3, 0); + sa1111_set_sleep_io(SA1111_DEV(skt->dev), GPIO_A0|GPIO_A1|GPIO_A2|GPIO_A3, 0); return sa1111_pcmcia_hw_init(skt); } @@ -95,7 +84,7 @@ printk("%s(): config socket %d vcc %d vpp %d\n", __FUNCTION__, unsigned long flags; local_irq_save(flags); - PA_DWR = (PA_DWR & ~pa_dwr_mask) | pa_dwr_set; + sa1111_set_io(SA1111_DEV(skt->dev), pa_dwr_mask, pa_dwr_set); local_irq_restore(flags); } -- cgit v1.2.3 From a8d11e3d0282e9607f65c73383c4030fd8f0e972 Mon Sep 17 00:00:00 2001 From: Ben Dooks Date: Tue, 26 Jul 2005 22:39:14 +0100 Subject: [PATCH] ARM: 2831/1: S3C2440 - split s3c2440 clocks from central clock code Patch from Ben Dooks Split the s3c2440 specific clocks from the arch clock support, to make the code clearer. Signed-off-by: Ben Dooks Signed-off-by: Russell King --- arch/arm/mach-s3c2410/Makefile | 1 + arch/arm/mach-s3c2410/clock.c | 57 ----------------- arch/arm/mach-s3c2410/s3c2440-clock.c | 116 ++++++++++++++++++++++++++++++++++ 3 files changed, 117 insertions(+), 57 deletions(-) create mode 100644 arch/arm/mach-s3c2410/s3c2440-clock.c diff --git a/arch/arm/mach-s3c2410/Makefile b/arch/arm/mach-s3c2410/Makefile index dabb605c1d7..55ed7c7e57d 100644 --- a/arch/arm/mach-s3c2410/Makefile +++ b/arch/arm/mach-s3c2410/Makefile @@ -24,6 +24,7 @@ obj-$(CONFIG_PM_SIMTEC) += pm-simtec.o obj-$(CONFIG_CPU_S3C2440) += s3c2440.o s3c2440-dsc.o obj-$(CONFIG_CPU_S3C2440) += s3c2440-irq.o +obj-$(CONFIG_CPU_S3C2440) += s3c2440-clock.o # machine specific support diff --git a/arch/arm/mach-s3c2410/clock.c b/arch/arm/mach-s3c2410/clock.c index 8d986b8401c..9a66050e887 100644 --- a/arch/arm/mach-s3c2410/clock.c +++ b/arch/arm/mach-s3c2410/clock.c @@ -448,60 +448,3 @@ int __init s3c24xx_setup_clocks(unsigned long xtal, return 0; } - -/* S3C2440 extended clock support */ - -#ifdef CONFIG_CPU_S3C2440 - -static struct clk s3c2440_clk_upll = { - .name = "upll", - .id = -1, -}; - -static struct clk s3c2440_clk_cam = { - .name = "camif", - .parent = &clk_h, - .id = -1, - .enable = s3c24xx_clkcon_enable, - .ctrlbit = S3C2440_CLKCON_CAMERA, -}; - -static struct clk s3c2440_clk_ac97 = { - .name = "ac97", - .parent = &clk_p, - .id = -1, - .enable = s3c24xx_clkcon_enable, - .ctrlbit = S3C2440_CLKCON_CAMERA, -}; - -static int s3c2440_clk_add(struct sys_device *sysdev) -{ - unsigned long upllcon = __raw_readl(S3C2410_UPLLCON); - - s3c2440_clk_upll.rate = s3c2410_get_pll(upllcon, clk_xtal.rate); - - printk("S3C2440: Clock Support, UPLL %ld.%03ld MHz\n", - print_mhz(s3c2440_clk_upll.rate)); - - s3c24xx_register_clock(&s3c2440_clk_ac97); - s3c24xx_register_clock(&s3c2440_clk_cam); - s3c24xx_register_clock(&s3c2440_clk_upll); - - clk_disable(&s3c2440_clk_ac97); - clk_disable(&s3c2440_clk_cam); - - return 0; -} - -static struct sysdev_driver s3c2440_clk_driver = { - .add = s3c2440_clk_add, -}; - -static int s3c24xx_clk_driver(void) -{ - return sysdev_driver_register(&s3c2440_sysclass, &s3c2440_clk_driver); -} - -arch_initcall(s3c24xx_clk_driver); - -#endif /* CONFIG_CPU_S3C2440 */ diff --git a/arch/arm/mach-s3c2410/s3c2440-clock.c b/arch/arm/mach-s3c2410/s3c2440-clock.c new file mode 100644 index 00000000000..b018a1f680c --- /dev/null +++ b/arch/arm/mach-s3c2410/s3c2440-clock.c @@ -0,0 +1,116 @@ +/* linux/arch/arm/mach-s3c2410/s3c2440-clock.c + * + * Copyright (c) 2004-2005 Simtec Electronics + * http://armlinux.simtec.co.uk/ + * Ben Dooks + * + * S3C2440 Clock support + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA +*/ + +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include + +#include +#include +#include +#include + +#include +#include + +#include "clock.h" +#include "cpu.h" + +/* S3C2440 extended clock support */ + +static struct clk s3c2440_clk_upll = { + .name = "upll", + .id = -1, +}; + +static struct clk s3c2440_clk_cam = { + .name = "camif", + .id = -1, + .enable = s3c24xx_clkcon_enable, + .ctrlbit = S3C2440_CLKCON_CAMERA, +}; + +static struct clk s3c2440_clk_ac97 = { + .name = "ac97", + .id = -1, + .enable = s3c24xx_clkcon_enable, + .ctrlbit = S3C2440_CLKCON_CAMERA, +}; + +static int s3c2440_clk_add(struct sys_device *sysdev) +{ + unsigned long upllcon = __raw_readl(S3C2410_UPLLCON); + struct clk *clk_h; + struct clk *clk_p; + struct clk *clk_xtal; + + clk_xtal = clk_get(NULL, "xtal"); + if (IS_ERR(clk_xtal)) { + printk(KERN_ERR "S3C2440: Failed to get clk_xtal\n"); + return -EINVAL; + } + + s3c2440_clk_upll.rate = s3c2410_get_pll(upllcon, clk_xtal->rate); + + printk("S3C2440: Clock Support, UPLL %ld.%03ld MHz\n", + print_mhz(s3c2440_clk_upll.rate)); + + clk_p = clk_get(NULL, "pclk"); + clk_h = clk_get(NULL, "hclk"); + + if (IS_ERR(clk_p) || IS_ERR(clk_h)) { + printk(KERN_ERR "S3C2440: Failed to get parent clocks\n"); + return -EINVAL; + } + + s3c2440_clk_cam.parent = clk_h; + s3c2440_clk_ac97.parent = clk_p; + + s3c24xx_register_clock(&s3c2440_clk_ac97); + s3c24xx_register_clock(&s3c2440_clk_cam); + s3c24xx_register_clock(&s3c2440_clk_upll); + + clk_disable(&s3c2440_clk_ac97); + clk_disable(&s3c2440_clk_cam); + + return 0; +} + +static struct sysdev_driver s3c2440_clk_driver = { + .add = s3c2440_clk_add, +}; + +static __init int s3c24xx_clk_driver(void) +{ + return sysdev_driver_register(&s3c2440_sysclass, &s3c2440_clk_driver); +} + +arch_initcall(s3c24xx_clk_driver); -- cgit v1.2.3