From 6fae35f9cea92793a98b2d9ab21235e5ae035581 Mon Sep 17 00:00:00 2001 From: David Vrabel Date: Mon, 17 Nov 2008 15:53:42 +0000 Subject: uwb: add basic radio manager The UWB radio manager coordinates the use of the radio between the PALs that may be using it. PALs request use of the radio with uwb_radio_start() and the radio manager will start beaconing if its not already doing so. When the last PAL has called uwb_radio_stop() beaconing will be stopped. In the future, the radio manager will have a more sophisticated channel selection algorithm, probably following the Channel Selection Policy from the WiMedia Alliance when it is finalized. For now, channel 9 (BG1, TFC1) is selected. The user may override the channel selected by the radio manager and may force the radio to stop beaconing. The WUSB Host Controller PAL makes use of this and there are two new debug PAL commands that can be used for testing. Signed-off-by: David Vrabel --- Documentation/ABI/testing/sysfs-class-uwb_rc | 14 ++++++++------ 1 file changed, 8 insertions(+), 6 deletions(-) (limited to 'Documentation/ABI') diff --git a/Documentation/ABI/testing/sysfs-class-uwb_rc b/Documentation/ABI/testing/sysfs-class-uwb_rc index a0d18dbeb7a..6a5fd072849 100644 --- a/Documentation/ABI/testing/sysfs-class-uwb_rc +++ b/Documentation/ABI/testing/sysfs-class-uwb_rc @@ -32,14 +32,16 @@ Contact: linux-usb@vger.kernel.org Description: Write: - [] + - to start beaconing on a specific channel, or stop - beaconing if is -1. Valid channels depends - on the radio controller's supported band groups. + to force a specific channel to be used when beaconing, + or, if is -1, to prohibit beaconing. If + is 0, then the default channel selection + algorithm will be used. Valid channels depends on the + radio controller's supported band groups. - may be used to try and join a specific - beacon group if more than one was found during a scan. + Reading returns the currently active channel, or -1 if + the radio controller is not beaconing. What: /sys/class/uwb_rc/uwbN/scan Date: July 2008 -- cgit v1.2.3 From c04fc586c1a480ba198f03ae7b6cbd7b57380b91 Mon Sep 17 00:00:00 2001 From: Gary Hade Date: Tue, 6 Jan 2009 14:39:14 -0800 Subject: mm: show node to memory section relationship with symlinks in sysfs Show node to memory section relationship with symlinks in sysfs Add /sys/devices/system/node/nodeX/memoryY symlinks for all the memory sections located on nodeX. For example: /sys/devices/system/node/node1/memory135 -> ../../memory/memory135 indicates that memory section 135 resides on node1. Also revises documentation to cover this change as well as updating Documentation/ABI/testing/sysfs-devices-memory to include descriptions of memory hotremove files 'phys_device', 'phys_index', and 'state' that were previously not described there. In addition to it always being a good policy to provide users with the maximum possible amount of physical location information for resources that can be hot-added and/or hot-removed, the following are some (but likely not all) of the user benefits provided by this change. Immediate: - Provides information needed to determine the specific node on which a defective DIMM is located. This will reduce system downtime when the node or defective DIMM is swapped out. - Prevents unintended onlining of a memory section that was previously offlined due to a defective DIMM. This could happen during node hot-add when the user or node hot-add assist script onlines _all_ offlined sections due to user or script inability to identify the specific memory sections located on the hot-added node. The consequences of reintroducing the defective memory could be ugly. - Provides information needed to vary the amount and distribution of memory on specific nodes for testing or debugging purposes. Future: - Will provide information needed to identify the memory sections that need to be offlined prior to physical removal of a specific node. Symlink creation during boot was tested on 2-node x86_64, 2-node ppc64, and 2-node ia64 systems. Symlink creation during physical memory hot-add tested on a 2-node x86_64 system. Signed-off-by: Gary Hade Signed-off-by: Badari Pulavarty Acked-by: Ingo Molnar Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- Documentation/ABI/testing/sysfs-devices-memory | 51 +++++++++++++++++++++++++- 1 file changed, 50 insertions(+), 1 deletion(-) (limited to 'Documentation/ABI') diff --git a/Documentation/ABI/testing/sysfs-devices-memory b/Documentation/ABI/testing/sysfs-devices-memory index 7a16fe1e227..9fe91c02ee4 100644 --- a/Documentation/ABI/testing/sysfs-devices-memory +++ b/Documentation/ABI/testing/sysfs-devices-memory @@ -6,7 +6,6 @@ Description: internal state of the kernel memory blocks. Files could be added or removed dynamically to represent hot-add/remove operations. - Users: hotplug memory add/remove tools https://w3.opensource.ibm.com/projects/powerpc-utils/ @@ -19,6 +18,56 @@ Description: This is useful for a user-level agent to determine identify removable sections of the memory before attempting potentially expensive hot-remove memory operation +Users: hotplug memory remove tools + https://w3.opensource.ibm.com/projects/powerpc-utils/ + +What: /sys/devices/system/memory/memoryX/phys_device +Date: September 2008 +Contact: Badari Pulavarty +Description: + The file /sys/devices/system/memory/memoryX/phys_device + is read-only and is designed to show the name of physical + memory device. Implementation is currently incomplete. +What: /sys/devices/system/memory/memoryX/phys_index +Date: September 2008 +Contact: Badari Pulavarty +Description: + The file /sys/devices/system/memory/memoryX/phys_index + is read-only and contains the section ID in hexadecimal + which is equivalent to decimal X contained in the + memory section directory name. + +What: /sys/devices/system/memory/memoryX/state +Date: September 2008 +Contact: Badari Pulavarty +Description: + The file /sys/devices/system/memory/memoryX/state + is read-write. When read, it's contents show the + online/offline state of the memory section. When written, + root can toggle the the online/offline state of a removable + memory section (see removable file description above) + using the following commands. + # echo online > /sys/devices/system/memory/memoryX/state + # echo offline > /sys/devices/system/memory/memoryX/state + + For example, if /sys/devices/system/memory/memory22/removable + contains a value of 1 and + /sys/devices/system/memory/memory22/state contains the + string "online" the following command can be executed by + by root to offline that section. + # echo offline > /sys/devices/system/memory/memory22/state Users: hotplug memory remove tools https://w3.opensource.ibm.com/projects/powerpc-utils/ + +What: /sys/devices/system/node/nodeX/memoryY +Date: September 2008 +Contact: Gary Hade +Description: + When CONFIG_NUMA is enabled + /sys/devices/system/node/nodeX/memoryY is a symbolic link that + points to the corresponding /sys/devices/system/memory/memoryY + memory section directory. For example, the following symbolic + link is created for memory section 9 on node0. + /sys/devices/system/node/node0/memory9 -> ../../memory/memory9 + -- cgit v1.2.3 From 7ad68e2f970fd84d15ad67ce3216aed05f944a9c Mon Sep 17 00:00:00 2001 From: David Brownell Date: Tue, 11 Nov 2008 17:39:02 -0800 Subject: regulator: sysfs attribute reduction (v2) Clean up the sysfs interface to regulators by only exposing the attributes that can be properly displayed. For example: when a particular regulator method is needed to display the value, only create that attribute when that method exists. This cleaned-up interface is much more comprehensible. Most regulators only support a subset of the possible methods, so often more than half the attributes would be meaningless. Many "not defined" values are no longer necessary. (But handling of out-of-range values still looks a bit iffy.) Documentation is updated to reflect that few of the attributes are *always* present, and to briefly explain why a regulator may not have a given attribute. This adds object code, about a dozen bytes more than was removed by the preceding patch, but saves a bunch of per-regulator data associated with the now-removed attributes. So there's a net reduction in memory footprint. Signed-off-by: David Brownell Signed-off-by: Liam Girdwood --- Documentation/ABI/testing/sysfs-class-regulator | 136 +++++++++++------------- 1 file changed, 60 insertions(+), 76 deletions(-) (limited to 'Documentation/ABI') diff --git a/Documentation/ABI/testing/sysfs-class-regulator b/Documentation/ABI/testing/sysfs-class-regulator index 3731f6f29bc..873ef1fc156 100644 --- a/Documentation/ABI/testing/sysfs-class-regulator +++ b/Documentation/ABI/testing/sysfs-class-regulator @@ -3,8 +3,9 @@ Date: April 2008 KernelVersion: 2.6.26 Contact: Liam Girdwood Description: - Each regulator directory will contain a field called - state. This holds the regulator output state. + Some regulator directories will contain a field called + state. This reports the regulator enable status, for + regulators which can report that value. This will be one of the following strings: @@ -18,7 +19,8 @@ Description: 'disabled' means the regulator output is OFF and is not supplying power to the system.. - 'unknown' means software cannot determine the state. + 'unknown' means software cannot determine the state, or + the reported state is invalid. NOTE: this field can be used in conjunction with microvolts and microamps to determine regulator output levels. @@ -53,9 +55,10 @@ Date: April 2008 KernelVersion: 2.6.26 Contact: Liam Girdwood Description: - Each regulator directory will contain a field called + Some regulator directories will contain a field called microvolts. This holds the regulator output voltage setting - measured in microvolts (i.e. E-6 Volts). + measured in microvolts (i.e. E-6 Volts), for regulators + which can report that voltage. NOTE: This value should not be used to determine the regulator output voltage level as this value is the same regardless of @@ -67,9 +70,10 @@ Date: April 2008 KernelVersion: 2.6.26 Contact: Liam Girdwood Description: - Each regulator directory will contain a field called + Some regulator directories will contain a field called microamps. This holds the regulator output current limit - setting measured in microamps (i.e. E-6 Amps). + setting measured in microamps (i.e. E-6 Amps), for regulators + which can report that current. NOTE: This value should not be used to determine the regulator output current level as this value is the same regardless of @@ -81,8 +85,9 @@ Date: April 2008 KernelVersion: 2.6.26 Contact: Liam Girdwood Description: - Each regulator directory will contain a field called - opmode. This holds the regulator operating mode setting. + Some regulator directories will contain a field called + opmode. This holds the current regulator operating mode, + for regulators which can report it. The opmode value can be one of the following strings: @@ -92,7 +97,7 @@ Description: 'standby' 'unknown' - The modes are described in include/linux/regulator/regulator.h + The modes are described in include/linux/regulator/consumer.h NOTE: This value should not be used to determine the regulator output operating mode as this value is the same regardless of @@ -104,9 +109,10 @@ Date: April 2008 KernelVersion: 2.6.26 Contact: Liam Girdwood Description: - Each regulator directory will contain a field called + Some regulator directories will contain a field called min_microvolts. This holds the minimum safe working regulator - output voltage setting for this domain measured in microvolts. + output voltage setting for this domain measured in microvolts, + for regulators which support voltage constraints. NOTE: this will return the string 'constraint not defined' if the power domain has no min microvolts constraint defined by @@ -118,9 +124,10 @@ Date: April 2008 KernelVersion: 2.6.26 Contact: Liam Girdwood Description: - Each regulator directory will contain a field called + Some regulator directories will contain a field called max_microvolts. This holds the maximum safe working regulator - output voltage setting for this domain measured in microvolts. + output voltage setting for this domain measured in microvolts, + for regulators which support voltage constraints. NOTE: this will return the string 'constraint not defined' if the power domain has no max microvolts constraint defined by @@ -132,10 +139,10 @@ Date: April 2008 KernelVersion: 2.6.26 Contact: Liam Girdwood Description: - Each regulator directory will contain a field called + Some regulator directories will contain a field called min_microamps. This holds the minimum safe working regulator output current limit setting for this domain measured in - microamps. + microamps, for regulators which support current constraints. NOTE: this will return the string 'constraint not defined' if the power domain has no min microamps constraint defined by @@ -147,10 +154,10 @@ Date: April 2008 KernelVersion: 2.6.26 Contact: Liam Girdwood Description: - Each regulator directory will contain a field called + Some regulator directories will contain a field called max_microamps. This holds the maximum safe working regulator output current limit setting for this domain measured in - microamps. + microamps, for regulators which support current constraints. NOTE: this will return the string 'constraint not defined' if the power domain has no max microamps constraint defined by @@ -185,7 +192,7 @@ Date: April 2008 KernelVersion: 2.6.26 Contact: Liam Girdwood Description: - Each regulator directory will contain a field called + Some regulator directories will contain a field called requested_microamps. This holds the total requested load current in microamps for this regulator from all its consumer devices. @@ -204,125 +211,102 @@ Date: May 2008 KernelVersion: 2.6.26 Contact: Liam Girdwood Description: - Each regulator directory will contain a field called + Some regulator directories will contain a field called suspend_mem_microvolts. This holds the regulator output voltage setting for this domain measured in microvolts when - the system is suspended to memory. - - NOTE: this will return the string 'not defined' if - the power domain has no suspend to memory voltage defined by - platform code. + the system is suspended to memory, for voltage regulators + implementing suspend voltage configuration constraints. What: /sys/class/regulator/.../suspend_disk_microvolts Date: May 2008 KernelVersion: 2.6.26 Contact: Liam Girdwood Description: - Each regulator directory will contain a field called + Some regulator directories will contain a field called suspend_disk_microvolts. This holds the regulator output voltage setting for this domain measured in microvolts when - the system is suspended to disk. - - NOTE: this will return the string 'not defined' if - the power domain has no suspend to disk voltage defined by - platform code. + the system is suspended to disk, for voltage regulators + implementing suspend voltage configuration constraints. What: /sys/class/regulator/.../suspend_standby_microvolts Date: May 2008 KernelVersion: 2.6.26 Contact: Liam Girdwood Description: - Each regulator directory will contain a field called + Some regulator directories will contain a field called suspend_standby_microvolts. This holds the regulator output voltage setting for this domain measured in microvolts when - the system is suspended to standby. - - NOTE: this will return the string 'not defined' if - the power domain has no suspend to standby voltage defined by - platform code. + the system is suspended to standby, for voltage regulators + implementing suspend voltage configuration constraints. What: /sys/class/regulator/.../suspend_mem_mode Date: May 2008 KernelVersion: 2.6.26 Contact: Liam Girdwood Description: - Each regulator directory will contain a field called + Some regulator directories will contain a field called suspend_mem_mode. This holds the regulator operating mode setting for this domain when the system is suspended to - memory. - - NOTE: this will return the string 'not defined' if - the power domain has no suspend to memory mode defined by - platform code. + memory, for regulators implementing suspend mode + configuration constraints. What: /sys/class/regulator/.../suspend_disk_mode Date: May 2008 KernelVersion: 2.6.26 Contact: Liam Girdwood Description: - Each regulator directory will contain a field called + Some regulator directories will contain a field called suspend_disk_mode. This holds the regulator operating mode - setting for this domain when the system is suspended to disk. - - NOTE: this will return the string 'not defined' if - the power domain has no suspend to disk mode defined by - platform code. + setting for this domain when the system is suspended to disk, + for regulators implementing suspend mode configuration + constraints. What: /sys/class/regulator/.../suspend_standby_mode Date: May 2008 KernelVersion: 2.6.26 Contact: Liam Girdwood Description: - Each regulator directory will contain a field called + Some regulator directories will contain a field called suspend_standby_mode. This holds the regulator operating mode setting for this domain when the system is suspended to - standby. - - NOTE: this will return the string 'not defined' if - the power domain has no suspend to standby mode defined by - platform code. + standby, for regulators implementing suspend mode + configuration constraints. What: /sys/class/regulator/.../suspend_mem_state Date: May 2008 KernelVersion: 2.6.26 Contact: Liam Girdwood Description: - Each regulator directory will contain a field called + Some regulator directories will contain a field called suspend_mem_state. This holds the regulator operating state - when suspended to memory. - - This will be one of the following strings: + when suspended to memory, for regulators implementing suspend + configuration constraints. - 'enabled' - 'disabled' - 'not defined' + This will be one of the same strings reported by + the "state" attribute. What: /sys/class/regulator/.../suspend_disk_state Date: May 2008 KernelVersion: 2.6.26 Contact: Liam Girdwood Description: - Each regulator directory will contain a field called + Some regulator directories will contain a field called suspend_disk_state. This holds the regulator operating state - when suspended to disk. - - This will be one of the following strings: + when suspended to disk, for regulators implementing + suspend configuration constraints. - 'enabled' - 'disabled' - 'not defined' + This will be one of the same strings reported by + the "state" attribute. What: /sys/class/regulator/.../suspend_standby_state Date: May 2008 KernelVersion: 2.6.26 Contact: Liam Girdwood Description: - Each regulator directory will contain a field called + Some regulator directories will contain a field called suspend_standby_state. This holds the regulator operating - state when suspended to standby. - - This will be one of the following strings: + state when suspended to standby, for regulators implementing + suspend configuration constraints. - 'enabled' - 'disabled' - 'not defined' + This will be one of the same strings reported by + the "state" attribute. -- cgit v1.2.3