From 1da177e4c3f41524e886b7f1b8a0c1fc7321cac2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Sat, 16 Apr 2005 15:20:36 -0700 Subject: Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip! --- Documentation/arm/SA1100/CERF | 29 +++++++++++++++++++++++++++++ 1 file changed, 29 insertions(+) create mode 100644 Documentation/arm/SA1100/CERF (limited to 'Documentation/arm/SA1100/CERF') diff --git a/Documentation/arm/SA1100/CERF b/Documentation/arm/SA1100/CERF new file mode 100644 index 00000000000..b3d845301ef --- /dev/null +++ b/Documentation/arm/SA1100/CERF @@ -0,0 +1,29 @@ +*** The StrongARM version of the CerfBoard/Cube has been discontinued *** + +The Intrinsyc CerfBoard is a StrongARM 1110-based computer on a board +that measures approximately 2" square. It includes an Ethernet +controller, an RS232-compatible serial port, a USB function port, and +one CompactFlash+ slot on the back. Pictures can be found at the +Intrinsyc website, http://www.intrinsyc.com. + +This document describes the support in the Linux kernel for the +Intrinsyc CerfBoard. + +Supported in this version: + - CompactFlash+ slot (select PCMCIA in General Setup and any options + that may be required) + - Onboard Crystal CS8900 Ethernet controller (Cerf CS8900A support in + Network Devices) + - Serial ports with a serial console (hardcoded to 38400 8N1) + +In order to get this kernel onto your Cerf, you need a server that runs +both BOOTP and TFTP. Detailed instructions should have come with your +evaluation kit on how to use the bootloader. This series of commands +will suffice: + + make ARCH=arm CROSS_COMPILE=arm-linux- cerfcube_defconfig + make ARCH=arm CROSS_COMPILE=arm-linux- zImage + make ARCH=arm CROSS_COMPILE=arm-linux- modules + cp arch/arm/boot/zImage + +support@intrinsyc.com -- cgit v1.2.3