From f4b50261207c987913f076d867c2e154d71fd012 Mon Sep 17 00:00:00 2001 From: Jean Delvare Date: Sun, 31 Jul 2005 21:49:03 +0200 Subject: [PATCH] hwmon: hwmon vs i2c, second round (06/11) The only thing left in i2c-sensor.h are module parameter definition macros. It's only an extension of what i2c.h offers, and this extension is not sensors-specific. As a matter of fact, a few non-sensors drivers use them. So we better merge them in i2c.h, and get rid of i2c-sensor.h altogether. Signed-off-by: Jean Delvare Signed-off-by: Greg Kroah-Hartman --- Documentation/i2c/porting-clients | 8 ++--- Documentation/i2c/writing-clients | 68 +++++++++------------------------------ 2 files changed, 19 insertions(+), 57 deletions(-) (limited to 'Documentation/i2c') diff --git a/Documentation/i2c/porting-clients b/Documentation/i2c/porting-clients index f9099211bd0..8b819379adc 100644 --- a/Documentation/i2c/porting-clients +++ b/Documentation/i2c/porting-clients @@ -1,4 +1,4 @@ -Revision 4, 2004-03-30 +Revision 5, 2005-07-29 Jean Delvare Greg KH @@ -17,13 +17,12 @@ yours for best results. Technical changes: -* [Includes] Get rid of "version.h". Replace with - . Includes typically look like that: +* [Includes] Get rid of "version.h" and . + Includes typically look like that: #include #include #include #include - #include #include /* if you need VRM support */ #include /* if you have I/O operations */ Please respect this inclusion order. Some extra headers may be @@ -31,6 +30,7 @@ Technical changes: * [Addresses] SENSORS_I2C_END becomes I2C_CLIENT_END, ISA addresses are no more handled by the i2c core. + SENSORS_INSMOD_ becomes I2C_CLIENT_INSMOD_. * [Client data] Get rid of sysctl_id. Try using standard names for register values (for example, temp_os becomes temp_max). You're diff --git a/Documentation/i2c/writing-clients b/Documentation/i2c/writing-clients index 43d7928056a..97e138cbb2a 100644 --- a/Documentation/i2c/writing-clients +++ b/Documentation/i2c/writing-clients @@ -155,8 +155,8 @@ NOTE: If you want to write a `sensors' driver, the interface is slightly -Probing classes (i2c) ---------------------- +Probing classes +--------------- All parameters are given as lists of unsigned 16-bit integers. Lists are terminated by I2C_CLIENT_END. @@ -171,12 +171,18 @@ The following lists are used internally: ignore: insmod parameter. A list of pairs. The first value is a bus number (-1 for any I2C bus), the second is the I2C address. These addresses are never probed. - This parameter overrules 'normal' and 'probe', but not the 'force' lists. + This parameter overrules the 'normal_i2c' list only. force: insmod parameter. A list of pairs. The first value is a bus number (-1 for any I2C bus), the second is the I2C address. A device is blindly assumed to be on the given address, no probing is done. +Additionally, kind-specific force lists may optionally be defined if +the driver supports several chip kinds. They are grouped in a +NULL-terminated list of pointers named forces, those first element if the +generic force list mentioned above. Each additional list correspond to an +insmod parameter of the form force_. + Fortunately, as a module writer, you just have to define the `normal_i2c' parameter. The complete declaration could look like this: @@ -186,61 +192,17 @@ parameter. The complete declaration could look like this: /* Magic definition of all other variables and things */ I2C_CLIENT_INSMOD; + /* Or, if your driver supports, say, 2 kind of devices: */ + I2C_CLIENT_INSMOD_2(foo, bar); + +If you use the multi-kind form, an enum will be defined for you: + enum chips { any_chip, foo, bar, ... } +You can then (and certainly should) use it in the driver code. Note that you *have* to call the defined variable `normal_i2c', without any prefix! -Probing classes (sensors) -------------------------- - -If you write a `sensors' driver, you use a slightly different interface. -Also, we use a enum of chip types. Don't forget to include `sensors.h'. - -The following lists are used internally. They are all lists of integers. - - normal_i2c: filled in by the module writer. Terminated by I2C_CLIENT_END. - A list of I2C addresses which should normally be examined. - probe: insmod parameter. Initialize this list with I2C_CLIENT_END values. - A list of pairs. The first value is a bus number (ANY_I2C_BUS for any - I2C bus), the second is the address. These addresses are also probed, - as if they were in the 'normal' list. - ignore: insmod parameter. Initialize this list with I2C_CLIENT_END values. - A list of pairs. The first value is a bus number (ANY_I2C_BUS for any - I2C bus), the second is the I2C address. These addresses are never - probed. This parameter overrules 'normal' and 'probe', but not the - 'force' lists. - -Also used is a list of pointers to sensors_force_data structures: - force_data: insmod parameters. A list, ending with an element of which - the force field is NULL. - Each element contains the type of chip and a list of pairs. - The first value is a bus number (ANY_I2C_BUS for any I2C bus), the - second is the address. - These are automatically translated to insmod variables of the form - force_foo. - -So we have a generic insmod variabled `force', and chip-specific variables -`force_CHIPNAME'. - -Fortunately, as a module writer, you just have to define the `normal_i2c' -parameter, and define what chip names are used. The complete declaration -could look like this: - /* Scan i2c addresses 0x37, and 0x48 to 0x4f */ - static unsigned short normal_i2c[] = { 0x37, 0x48, 0x49, 0x4a, 0x4b, 0x4c, - 0x4d, 0x4e, 0x4f, I2C_CLIENT_END }; - - /* Define chips foo and bar, as well as all module parameters and things */ - SENSORS_INSMOD_2(foo,bar); - -If you have one chip, you use macro SENSORS_INSMOD_1(chip), if you have 2 -you use macro SENSORS_INSMOD_2(chip1,chip2), etc. If you do not want to -bother with chip types, you can use SENSORS_INSMOD_0. - -A enum is automatically defined as follows: - enum chips { any_chip, chip1, chip2, ... } - - Attaching to an adapter ----------------------- -- cgit v1.2.3