From 1da177e4c3f41524e886b7f1b8a0c1fc7321cac2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Sat, 16 Apr 2005 15:20:36 -0700 Subject: Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip! --- Documentation/isdn/README.hfc-pci | 41 +++++++++++++++++++++++++++++++++++++++ 1 file changed, 41 insertions(+) create mode 100644 Documentation/isdn/README.hfc-pci (limited to 'Documentation/isdn/README.hfc-pci') diff --git a/Documentation/isdn/README.hfc-pci b/Documentation/isdn/README.hfc-pci new file mode 100644 index 00000000000..e8a4ef0226e --- /dev/null +++ b/Documentation/isdn/README.hfc-pci @@ -0,0 +1,41 @@ +The driver for the HFC-PCI and HFC-PCI-A chips from CCD may be used +for many OEM cards using this chips. +Additionally the driver has a special feature which makes it possible +to read the echo-channel of the isdn bus. So all frames in both directions +may be logged. +When the echo logging feature is used the number of available B-channels +for a HFC-PCI card is reduced to 1. Of course this is only relevant to +the card, not to the isdn line. +To activate the echo mode the following ioctls must be entered: + +hisaxctrl 10 1 + +This reduces the available channels to 1. There must not be open connections +through this card when entering the command. +And then: + +hisaxctrl 12 1 + +This enables the echo mode. If Hex logging is activated the isdnctrlx +devices show a output with a line beginning of HEX: for the providers +exchange and ECHO: for isdn devices sending to the provider. + +If more than one HFC-PCI cards are installed, a specific card may be selected +at the hisax module load command line. Supply the load command with the desired +IO-address of the desired card. +Example: +There tree cards installed in your machine at IO-base addresses 0xd000, 0xd400 +and 0xdc00 +If you want to use the card at 0xd400 standalone you should supply the insmod +or depmod with type=35 io=0xd400. +If you want to use all three cards, but the order needs to be at 0xdc00,0xd400, +0xd000 you may give the parameters type=35,35,35 io=0xdc00,0xd400,0xd00 +Then the desired card will be the initialised in the desired order. +If the io parameter is used the io addresses of all used cards should be +supplied else the parameter is assumed 0 and a auto search for a free card is +invoked which may not give the wanted result. + +Comments and reports to werner@isdn4linux.de or werner@isdn-development.de + + + -- cgit v1.2.3