From 1da177e4c3f41524e886b7f1b8a0c1fc7321cac2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Sat, 16 Apr 2005 15:20:36 -0700 Subject: Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip! --- arch/arm/boot/compressed/head-sharpsl.S | 92 +++++++++++++++++++++++++++++++++ 1 file changed, 92 insertions(+) create mode 100644 arch/arm/boot/compressed/head-sharpsl.S (limited to 'arch/arm/boot/compressed/head-sharpsl.S') diff --git a/arch/arm/boot/compressed/head-sharpsl.S b/arch/arm/boot/compressed/head-sharpsl.S new file mode 100644 index 00000000000..d6bf8a2b090 --- /dev/null +++ b/arch/arm/boot/compressed/head-sharpsl.S @@ -0,0 +1,92 @@ +/* + * linux/arch/arm/boot/compressed/head-sharpsl.S + * + * Copyright (C) 2004-2005 Richard Purdie + * + * Sharp's bootloader doesn't pass any kind of machine ID + * so we have to figure out the machine for ourselves... + * + * Support for Poodle, Corgi (SL-C700), Shepherd (SL-C750) + * and Husky (SL-C760). + * + */ + +#include +#include +#include + +#ifndef CONFIG_PXA_SHARPSL +#error What am I doing here... +#endif + + .section ".start", "ax" + +__SharpSL_start: + + ldr r1, .W100ADDR @ Base address of w100 chip + regs offset + + mov r6, #0x31 @ Load Magic Init value + str r6, [r1, #0x280] @ to SCRATCH_UMSK + mov r5, #0x3000 +.W100LOOP: + subs r5, r5, #1 + bne .W100LOOP + mov r6, #0x30 @ Load 2nd Magic Init value + str r6, [r1, #0x280] @ to SCRATCH_UMSK + + ldr r6, [r1, #0] @ Load Chip ID + ldr r3, .W100ID + ldr r7, .POODLEID + cmp r6, r3 + bne .SHARPEND @ We have no w100 - Poodle + + mrc p15, 0, r6, c0, c0 @ Get Processor ID + and r6, r6, #0xffffff00 + ldr r7, .CORGIID + ldr r3, .PXA255ID + cmp r6, r3 + blo .SHARPEND @ We have a PXA250 - Corgi + + mov r1, #0x0c000000 @ Base address of NAND chip + ldrb r3, [r1, #24] @ Load FLASHCTL + bic r3, r3, #0x11 @ SET NCE + orr r3, r3, #0x0a @ SET CLR + FLWP + strb r3, [r1, #24] @ Save to FLASHCTL + mov r2, #0x90 @ Command "readid" + strb r2, [r1, #20] @ Save to FLASHIO + bic r3, r3, #2 @ CLR CLE + orr r3, r3, #4 @ SET ALE + strb r3, [r1, #24] @ Save to FLASHCTL + mov r2, #0 @ Address 0x00 + strb r2, [r1, #20] @ Save to FLASHIO + bic r3, r3, #4 @ CLR ALE + strb r3, [r1, #24] @ Save to FLASHCTL +.SHARP1: + ldrb r3, [r1, #24] @ Load FLASHCTL + tst r3, #32 @ Is chip ready? + beq .SHARP1 + ldrb r2, [r1, #20] @ NAND Manufacturer ID + ldrb r3, [r1, #20] @ NAND Chip ID + ldr r7, .SHEPHERDID + cmp r3, #0x76 @ 64MiB flash + beq .SHARPEND @ We have Shepherd + ldr r7, .HUSKYID @ Must be Husky + b .SHARPEND + +.PXA255ID: + .word 0x69052d00 @ PXA255 Processor ID +.W100ID: + .word 0x57411002 @ w100 Chip ID +.W100ADDR: + .word 0x08010000 @ w100 Chip ID Reg Address +.POODLEID: + .word MACH_TYPE_POODLE +.CORGIID: + .word MACH_TYPE_CORGI +.SHEPHERDID: + .word MACH_TYPE_SHEPHERD +.HUSKYID: + .word MACH_TYPE_HUSKY +.SHARPEND: + + -- cgit v1.2.3