From 25acf553aeed86f93f2cf39227b59fc6eb3e8c78 Mon Sep 17 00:00:00 2001 From: Chaithrika U S Date: Fri, 5 Jun 2009 06:28:08 -0400 Subject: davinci: ASoC: Add the platform devices for ASP 1) Registers the platform devices for ASP on dm355, dm644x and dm646x so that the machine driver can probe to get ASP related platform data. 2) Move towards definition of the asp clocks using physical name(for dm355 and dm644x) 3) Add platform data to board specific files. Signed-off-by: Naresh Medisetty Signed-off-by: Chaithrika U S Signed-off-by: Kevin Hilman --- arch/arm/mach-davinci/board-dm646x-evm.c | 33 ++++++++++++++++++++++++++++++++ 1 file changed, 33 insertions(+) (limited to 'arch/arm/mach-davinci/board-dm646x-evm.c') diff --git a/arch/arm/mach-davinci/board-dm646x-evm.c b/arch/arm/mach-davinci/board-dm646x-evm.c index 8657e72debc..0aa18df4110 100644 --- a/arch/arm/mach-davinci/board-dm646x-evm.c +++ b/arch/arm/mach-davinci/board-dm646x-evm.c @@ -206,6 +206,37 @@ static struct at24_platform_data eeprom_info = { .context = (void *)0x7f00, }; +static u8 dm646x_iis_serializer_direction[] = { + TX_MODE, RX_MODE, INACTIVE_MODE, INACTIVE_MODE, +}; + +static u8 dm646x_dit_serializer_direction[] = { + TX_MODE, +}; + +static struct snd_platform_data dm646x_evm_snd_data[] = { + { + .clk_name = "mcasp0", + .tx_dma_offset = 0x400, + .rx_dma_offset = 0x400, + .op_mode = DAVINCI_MCASP_IIS_MODE, + .num_serializer = ARRAY_SIZE(dm646x_iis_serializer_direction), + .tdm_slots = 2, + .serial_dir = dm646x_iis_serializer_direction, + .eventq_no = EVENTQ_0, + }, + { + .clk_name = "mcasp1", + .tx_dma_offset = 0x400, + .rx_dma_offset = 0, + .op_mode = DAVINCI_MCASP_DIT_MODE, + .num_serializer = ARRAY_SIZE(dm646x_dit_serializer_direction), + .tdm_slots = 32, + .serial_dir = dm646x_dit_serializer_direction, + .eventq_no = EVENTQ_0, + }, +}; + static struct i2c_board_info __initdata i2c_info[] = { { I2C_BOARD_INFO("24c256", 0x50), @@ -239,6 +270,8 @@ static __init void evm_init(void) evm_init_i2c(); davinci_serial_init(&uart_config); + dm646x_init_mcasp0(&dm646x_evm_snd_data[0]); + dm646x_init_mcasp1(&dm646x_evm_snd_data[1]); soc_info->emac_pdata->phy_mask = DM646X_EVM_PHY_MASK; soc_info->emac_pdata->mdio_max_freq = DM646X_EVM_MDIO_FREQUENCY; -- cgit v1.2.3 From 548197bdf02882db39b7563d26975e7549e6af03 Mon Sep 17 00:00:00 2001 From: Hemant Pedanekar Date: Fri, 17 Jul 2009 23:30:36 +0530 Subject: davinci: dm646x-evm: Add support for IDE Controls ATA_RSTn and ATA_PWD through CPLD register 0 to enable ATA. An I2C driver is added for the same. Calls ide init if enabled in configuration. Signed-off-by: Hemant Pedanekar Signed-off-by: Kevin Hilman --- arch/arm/mach-davinci/board-dm646x-evm.c | 59 ++++++++++++++++++++++++++++++++ 1 file changed, 59 insertions(+) (limited to 'arch/arm/mach-davinci/board-dm646x-evm.c') diff --git a/arch/arm/mach-davinci/board-dm646x-evm.c b/arch/arm/mach-davinci/board-dm646x-evm.c index 0aa18df4110..fa91520532a 100644 --- a/arch/arm/mach-davinci/board-dm646x-evm.c +++ b/arch/arm/mach-davinci/board-dm646x-evm.c @@ -48,6 +48,17 @@ #include #include +#if defined(CONFIG_BLK_DEV_PALMCHIP_BK3710) || \ + defined(CONFIG_BLK_DEV_PALMCHIP_BK3710_MODULE) +#define HAS_ATA 1 +#else +#define HAS_ATA 0 +#endif + +/* CPLD Register 0 bits to control ATA */ +#define DM646X_EVM_ATA_RST BIT(0) +#define DM646X_EVM_ATA_PWD BIT(1) + #define DM646X_EVM_PHY_MASK (0x2) #define DM646X_EVM_MDIO_FREQUENCY (2200000) /* PHY bus frequency */ @@ -55,6 +66,47 @@ static struct davinci_uart_config uart_config __initdata = { .enabled_uarts = (1 << 0), }; +/* CPLD Register 0 Client: used for I/O Control */ +static int cpld_reg0_probe(struct i2c_client *client, + const struct i2c_device_id *id) +{ + if (HAS_ATA) { + u8 data; + struct i2c_msg msg[2] = { + { + .addr = client->addr, + .flags = I2C_M_RD, + .len = 1, + .buf = &data, + }, + { + .addr = client->addr, + .flags = 0, + .len = 1, + .buf = &data, + }, + }; + + /* Clear ATA_RSTn and ATA_PWD bits to enable ATA operation. */ + i2c_transfer(client->adapter, msg, 1); + data &= ~(DM646X_EVM_ATA_RST | DM646X_EVM_ATA_PWD); + i2c_transfer(client->adapter, msg + 1, 1); + } + + return 0; +} + +static const struct i2c_device_id cpld_reg_ids[] = { + { "cpld_reg0", 0, }, + { }, +}; + +static struct i2c_driver dm6467evm_cpld_driver = { + .driver.name = "cpld_reg0", + .id_table = cpld_reg_ids, + .probe = cpld_reg0_probe, +}; + /* LEDS */ static struct gpio_led evm_leds[] = { @@ -246,6 +298,9 @@ static struct i2c_board_info __initdata i2c_info[] = { I2C_BOARD_INFO("pcf8574a", 0x38), .platform_data = &pcf_data, }, + { + I2C_BOARD_INFO("cpld_reg0", 0x3a), + }, }; static struct davinci_i2c_platform_data i2c_pdata = { @@ -256,6 +311,7 @@ static struct davinci_i2c_platform_data i2c_pdata = { static void __init evm_init_i2c(void) { davinci_init_i2c(&i2c_pdata); + i2c_add_driver(&dm6467evm_cpld_driver); i2c_register_board_info(1, i2c_info, ARRAY_SIZE(i2c_info)); } @@ -273,6 +329,9 @@ static __init void evm_init(void) dm646x_init_mcasp0(&dm646x_evm_snd_data[0]); dm646x_init_mcasp1(&dm646x_evm_snd_data[1]); + if (HAS_ATA) + dm646x_init_ide(); + soc_info->emac_pdata->phy_mask = DM646X_EVM_PHY_MASK; soc_info->emac_pdata->mdio_max_freq = DM646X_EVM_MDIO_FREQUENCY; } -- cgit v1.2.3 From 61aa07328d8e70d95a1e2325288df52a1e92a694 Mon Sep 17 00:00:00 2001 From: Kevin Hilman Date: Wed, 15 Jul 2009 08:47:48 -0700 Subject: davinci: audio clocks: use struct device instead of clock names There is no need to pass clock name strings in platform_data. Instead, setup clkdev nodes to have correct ASoC device names. Signed-off-by: Kevin Hilman --- arch/arm/mach-davinci/board-dm646x-evm.c | 2 -- 1 file changed, 2 deletions(-) (limited to 'arch/arm/mach-davinci/board-dm646x-evm.c') diff --git a/arch/arm/mach-davinci/board-dm646x-evm.c b/arch/arm/mach-davinci/board-dm646x-evm.c index fa91520532a..cb30afe2205 100644 --- a/arch/arm/mach-davinci/board-dm646x-evm.c +++ b/arch/arm/mach-davinci/board-dm646x-evm.c @@ -268,7 +268,6 @@ static u8 dm646x_dit_serializer_direction[] = { static struct snd_platform_data dm646x_evm_snd_data[] = { { - .clk_name = "mcasp0", .tx_dma_offset = 0x400, .rx_dma_offset = 0x400, .op_mode = DAVINCI_MCASP_IIS_MODE, @@ -278,7 +277,6 @@ static struct snd_platform_data dm646x_evm_snd_data[] = { .eventq_no = EVENTQ_0, }, { - .clk_name = "mcasp1", .tx_dma_offset = 0x400, .rx_dma_offset = 0, .op_mode = DAVINCI_MCASP_DIT_MODE, -- cgit v1.2.3 From 1a7ff8ff6eebfa732ca2abe00a0878136bfb2d01 Mon Sep 17 00:00:00 2001 From: Chaithrika U S Date: Tue, 25 Aug 2009 15:20:05 +0300 Subject: davinci: audio: move tlv320aic33 i2c setup into board files Tested on DM6446, DM355, DM6447, DA850 EVMs. Signed-off-by: Chaithrika U S Signed-off-by: Kevin Hilman --- arch/arm/mach-davinci/board-dm646x-evm.c | 3 +++ 1 file changed, 3 insertions(+) (limited to 'arch/arm/mach-davinci/board-dm646x-evm.c') diff --git a/arch/arm/mach-davinci/board-dm646x-evm.c b/arch/arm/mach-davinci/board-dm646x-evm.c index cb30afe2205..20547049b48 100644 --- a/arch/arm/mach-davinci/board-dm646x-evm.c +++ b/arch/arm/mach-davinci/board-dm646x-evm.c @@ -299,6 +299,9 @@ static struct i2c_board_info __initdata i2c_info[] = { { I2C_BOARD_INFO("cpld_reg0", 0x3a), }, + { + I2C_BOARD_INFO("tlv320aic33", 0x18), + } }; static struct davinci_i2c_platform_data i2c_pdata = { -- cgit v1.2.3 From 85609c1ccda64af7d7c277469183f20e4f3b69c3 Mon Sep 17 00:00:00 2001 From: Muralidharan Karicheri Date: Wed, 16 Sep 2009 13:15:30 -0400 Subject: DaVinci: DM646x - platform changes for vpif capture and display drivers VPIF display changes (Chaithrika) Add platform device and resource structures. Also define a platform specific clock setup function that can be accessed by the driver to configure the clock and CPLD. VPIF caputure changes (Murali) 1) Modify vpif_subdev_info to add board_info, routing information and vpif interface configuration. Remove addr since it is part of board_info 2) Add code to setup channel mode and input decoder path for vpif capture driver Also incorporated comments against version v0 of the patch series and added a spinlock to protect writes to common registers Tested on DM6467 on channel 0 using TVP514x. Following bootargs used for drivers: vpif_capture.ch0_bufsize=829440 vpif_display.ch2_bufsize=829440 Signed-off-by: Manjunath Hadli Signed-off-by: Brijesh Jadav Signed-off-by: Chaithrika U S Reviewed-by: Hans Verkuil Signed-off-by: Muralidharan Karicheri Signed-off-by: Kevin Hilman --- arch/arm/mach-davinci/board-dm646x-evm.c | 319 ++++++++++++++++++++++++++++++- 1 file changed, 318 insertions(+), 1 deletion(-) (limited to 'arch/arm/mach-davinci/board-dm646x-evm.c') diff --git a/arch/arm/mach-davinci/board-dm646x-evm.c b/arch/arm/mach-davinci/board-dm646x-evm.c index 20547049b48..24e0e13b149 100644 --- a/arch/arm/mach-davinci/board-dm646x-evm.c +++ b/arch/arm/mach-davinci/board-dm646x-evm.c @@ -34,6 +34,8 @@ #include #include +#include + #include #include #include @@ -62,6 +64,30 @@ #define DM646X_EVM_PHY_MASK (0x2) #define DM646X_EVM_MDIO_FREQUENCY (2200000) /* PHY bus frequency */ +#define VIDCLKCTL_OFFSET (DAVINCI_SYSTEM_MODULE_BASE + 0x38) +#define VSCLKDIS_OFFSET (DAVINCI_SYSTEM_MODULE_BASE + 0x6c) +#define VCH2CLK_MASK (BIT_MASK(10) | BIT_MASK(9) | BIT_MASK(8)) +#define VCH2CLK_SYSCLK8 (BIT(9)) +#define VCH2CLK_AUXCLK (BIT(9) | BIT(8)) +#define VCH3CLK_MASK (BIT_MASK(14) | BIT_MASK(13) | BIT_MASK(12)) +#define VCH3CLK_SYSCLK8 (BIT(13)) +#define VCH3CLK_AUXCLK (BIT(14) | BIT(13)) + +#define VIDCH2CLK (BIT(10)) +#define VIDCH3CLK (BIT(11)) +#define VIDCH1CLK (BIT(4)) +#define TVP7002_INPUT (BIT(4)) +#define TVP5147_INPUT (~BIT(4)) +#define VPIF_INPUT_ONE_CHANNEL (BIT(5)) +#define VPIF_INPUT_TWO_CHANNEL (~BIT(5)) +#define TVP5147_CH0 "tvp514x-0" +#define TVP5147_CH1 "tvp514x-1" + +static void __iomem *vpif_vidclkctl_reg; +static void __iomem *vpif_vsclkdis_reg; +/* spin lock for updating above registers */ +static spinlock_t vpif_reg_lock; + static struct davinci_uart_config uart_config __initdata = { .enabled_uarts = (1 << 0), }; @@ -287,6 +313,40 @@ static struct snd_platform_data dm646x_evm_snd_data[] = { }, }; +static struct i2c_client *cpld_client; + +static int cpld_video_probe(struct i2c_client *client, + const struct i2c_device_id *id) +{ + cpld_client = client; + return 0; +} + +static int __devexit cpld_video_remove(struct i2c_client *client) +{ + cpld_client = NULL; + return 0; +} + +static const struct i2c_device_id cpld_video_id[] = { + { "cpld_video", 0 }, + { } +}; + +static struct i2c_driver cpld_video_driver = { + .driver = { + .name = "cpld_video", + }, + .probe = cpld_video_probe, + .remove = cpld_video_remove, + .id_table = cpld_video_id, +}; + +static void evm_init_cpld(void) +{ + i2c_add_driver(&cpld_video_driver); +} + static struct i2c_board_info __initdata i2c_info[] = { { I2C_BOARD_INFO("24c256", 0x50), @@ -301,7 +361,10 @@ static struct i2c_board_info __initdata i2c_info[] = { }, { I2C_BOARD_INFO("tlv320aic33", 0x18), - } + }, + { + I2C_BOARD_INFO("cpld_video", 0x3b), + }, }; static struct davinci_i2c_platform_data i2c_pdata = { @@ -309,11 +372,265 @@ static struct davinci_i2c_platform_data i2c_pdata = { .bus_delay = 0 /* usec */, }; +static int set_vpif_clock(int mux_mode, int hd) +{ + unsigned long flags; + unsigned int value; + int val = 0; + int err = 0; + + if (!vpif_vidclkctl_reg || !vpif_vsclkdis_reg || !cpld_client) + return -ENXIO; + + /* disable the clock */ + spin_lock_irqsave(&vpif_reg_lock, flags); + value = __raw_readl(vpif_vsclkdis_reg); + value |= (VIDCH3CLK | VIDCH2CLK); + __raw_writel(value, vpif_vsclkdis_reg); + spin_unlock_irqrestore(&vpif_reg_lock, flags); + + val = i2c_smbus_read_byte(cpld_client); + if (val < 0) + return val; + + if (mux_mode == 1) + val &= ~0x40; + else + val |= 0x40; + + err = i2c_smbus_write_byte(cpld_client, val); + if (err) + return err; + + value = __raw_readl(vpif_vidclkctl_reg); + value &= ~(VCH2CLK_MASK); + value &= ~(VCH3CLK_MASK); + + if (hd >= 1) + value |= (VCH2CLK_SYSCLK8 | VCH3CLK_SYSCLK8); + else + value |= (VCH2CLK_AUXCLK | VCH3CLK_AUXCLK); + + __raw_writel(value, vpif_vidclkctl_reg); + + spin_lock_irqsave(&vpif_reg_lock, flags); + value = __raw_readl(vpif_vsclkdis_reg); + /* enable the clock */ + value &= ~(VIDCH3CLK | VIDCH2CLK); + __raw_writel(value, vpif_vsclkdis_reg); + spin_unlock_irqrestore(&vpif_reg_lock, flags); + + return 0; +} + +static struct vpif_subdev_info dm646x_vpif_subdev[] = { + { + .name = "adv7343", + .board_info = { + I2C_BOARD_INFO("adv7343", 0x2a), + }, + }, + { + .name = "ths7303", + .board_info = { + I2C_BOARD_INFO("ths7303", 0x2c), + }, + }, +}; + +static const char *output[] = { + "Composite", + "Component", + "S-Video", +}; + +static struct vpif_display_config dm646x_vpif_display_config = { + .set_clock = set_vpif_clock, + .subdevinfo = dm646x_vpif_subdev, + .subdev_count = ARRAY_SIZE(dm646x_vpif_subdev), + .output = output, + .output_count = ARRAY_SIZE(output), + .card_name = "DM646x EVM", +}; + +/** + * setup_vpif_input_path() + * @channel: channel id (0 - CH0, 1 - CH1) + * @sub_dev_name: ptr sub device name + * + * This will set vpif input to capture data from tvp514x or + * tvp7002. + */ +static int setup_vpif_input_path(int channel, const char *sub_dev_name) +{ + int err = 0; + int val; + + /* for channel 1, we don't do anything */ + if (channel != 0) + return 0; + + if (!cpld_client) + return -ENXIO; + + val = i2c_smbus_read_byte(cpld_client); + if (val < 0) + return val; + + if (!strcmp(sub_dev_name, TVP5147_CH0) || + !strcmp(sub_dev_name, TVP5147_CH1)) + val &= TVP5147_INPUT; + else + val |= TVP7002_INPUT; + + err = i2c_smbus_write_byte(cpld_client, val); + if (err) + return err; + return 0; +} + +/** + * setup_vpif_input_channel_mode() + * @mux_mode: mux mode. 0 - 1 channel or (1) - 2 channel + * + * This will setup input mode to one channel (TVP7002) or 2 channel (TVP5147) + */ +static int setup_vpif_input_channel_mode(int mux_mode) +{ + unsigned long flags; + int err = 0; + int val; + u32 value; + + if (!vpif_vsclkdis_reg || !cpld_client) + return -ENXIO; + + val = i2c_smbus_read_byte(cpld_client); + if (val < 0) + return val; + + spin_lock_irqsave(&vpif_reg_lock, flags); + value = __raw_readl(vpif_vsclkdis_reg); + if (mux_mode) { + val &= VPIF_INPUT_TWO_CHANNEL; + value |= VIDCH1CLK; + } else { + val |= VPIF_INPUT_ONE_CHANNEL; + value &= ~VIDCH1CLK; + } + __raw_writel(value, vpif_vsclkdis_reg); + spin_unlock_irqrestore(&vpif_reg_lock, flags); + + err = i2c_smbus_write_byte(cpld_client, val); + if (err) + return err; + + return 0; +} + +static struct tvp514x_platform_data tvp5146_pdata = { + .clk_polarity = 0, + .hs_polarity = 1, + .vs_polarity = 1 +}; + +#define TVP514X_STD_ALL (V4L2_STD_NTSC | V4L2_STD_PAL) + +static struct vpif_subdev_info vpif_capture_sdev_info[] = { + { + .name = TVP5147_CH0, + .board_info = { + I2C_BOARD_INFO("tvp5146", 0x5d), + .platform_data = &tvp5146_pdata, + }, + .input = INPUT_CVBS_VI2B, + .output = OUTPUT_10BIT_422_EMBEDDED_SYNC, + .can_route = 1, + .vpif_if = { + .if_type = VPIF_IF_BT656, + .hd_pol = 1, + .vd_pol = 1, + .fid_pol = 0, + }, + }, + { + .name = TVP5147_CH1, + .board_info = { + I2C_BOARD_INFO("tvp5146", 0x5c), + .platform_data = &tvp5146_pdata, + }, + .input = INPUT_SVIDEO_VI2C_VI1C, + .output = OUTPUT_10BIT_422_EMBEDDED_SYNC, + .can_route = 1, + .vpif_if = { + .if_type = VPIF_IF_BT656, + .hd_pol = 1, + .vd_pol = 1, + .fid_pol = 0, + }, + }, +}; + +static const struct vpif_input dm6467_ch0_inputs[] = { + { + .input = { + .index = 0, + .name = "Composite", + .type = V4L2_INPUT_TYPE_CAMERA, + .std = TVP514X_STD_ALL, + }, + .subdev_name = TVP5147_CH0, + }, +}; + +static const struct vpif_input dm6467_ch1_inputs[] = { + { + .input = { + .index = 0, + .name = "S-Video", + .type = V4L2_INPUT_TYPE_CAMERA, + .std = TVP514X_STD_ALL, + }, + .subdev_name = TVP5147_CH1, + }, +}; + +static struct vpif_capture_config dm646x_vpif_capture_cfg = { + .setup_input_path = setup_vpif_input_path, + .setup_input_channel_mode = setup_vpif_input_channel_mode, + .subdev_info = vpif_capture_sdev_info, + .subdev_count = ARRAY_SIZE(vpif_capture_sdev_info), + .chan_config[0] = { + .inputs = dm6467_ch0_inputs, + .input_count = ARRAY_SIZE(dm6467_ch0_inputs), + }, + .chan_config[1] = { + .inputs = dm6467_ch1_inputs, + .input_count = ARRAY_SIZE(dm6467_ch1_inputs), + }, +}; + +static void __init evm_init_video(void) +{ + vpif_vidclkctl_reg = ioremap(VIDCLKCTL_OFFSET, 4); + vpif_vsclkdis_reg = ioremap(VSCLKDIS_OFFSET, 4); + if (!vpif_vidclkctl_reg || !vpif_vsclkdis_reg) { + pr_err("Can't map VPIF VIDCLKCTL or VSCLKDIS registers\n"); + return; + } + spin_lock_init(&vpif_reg_lock); + + dm646x_setup_vpif(&dm646x_vpif_display_config, + &dm646x_vpif_capture_cfg); +} + static void __init evm_init_i2c(void) { davinci_init_i2c(&i2c_pdata); i2c_add_driver(&dm6467evm_cpld_driver); i2c_register_board_info(1, i2c_info, ARRAY_SIZE(i2c_info)); + evm_init_cpld(); + evm_init_video(); } static void __init davinci_map_io(void) -- cgit v1.2.3