From 172ef275444efa12d834fb9d1b1acdac92db47f7 Mon Sep 17 00:00:00 2001 From: Steve Sakoman Date: Mon, 2 Feb 2009 06:27:49 +0000 Subject: ARM: Add SMSC911X support to Overo platform (V2) Gumstix will soon be shipping a variant of their Summit board that includes an SMSC LAN9221 ethernet interface. This patch provides support via the smsc911x driver when enabled in kernel config. The Overo defconfig is not updated since the LAN9221 is an option not present on all systems. Signed-off-by: Steve Sakoman Signed-off-by: Tony Lindgren Acked-by: Steve Glendinning --- arch/arm/mach-omap2/board-overo.c | 65 +++++++++++++++++++++++++++++++++++++++ 1 file changed, 65 insertions(+) (limited to 'arch/arm/mach-omap2') diff --git a/arch/arm/mach-omap2/board-overo.c b/arch/arm/mach-omap2/board-overo.c index b3f6e9d8180..b1f23bea863 100644 --- a/arch/arm/mach-omap2/board-overo.c +++ b/arch/arm/mach-omap2/board-overo.c @@ -57,6 +57,9 @@ #define GPMC_CS0_BASE 0x60 #define GPMC_CS_SIZE 0x30 +#define OVERO_SMSC911X_CS 5 +#define OVERO_SMSC911X_GPIO 176 + #if defined(CONFIG_TOUCHSCREEN_ADS7846) || \ defined(CONFIG_TOUCHSCREEN_ADS7846_MODULE) @@ -116,6 +119,67 @@ static void __init overo_ads7846_init(void) static inline void __init overo_ads7846_init(void) { return; } #endif +#if defined(CONFIG_SMSC911X) || defined(CONFIG_SMSC911X_MODULE) + +#include + +static struct resource overo_smsc911x_resources[] = { + { + .name = "smsc911x-memory", + .flags = IORESOURCE_MEM, + }, + { + .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_LOWLEVEL, + }, +}; + +static struct smsc911x_platform_config overo_smsc911x_config = { + .irq_polarity = SMSC911X_IRQ_POLARITY_ACTIVE_LOW, + .irq_type = SMSC911X_IRQ_TYPE_OPEN_DRAIN, + .flags = SMSC911X_USE_32BIT , + .phy_interface = PHY_INTERFACE_MODE_MII, +}; + +static struct platform_device overo_smsc911x_device = { + .name = "smsc911x", + .id = -1, + .num_resources = ARRAY_SIZE(overo_smsc911x_resources), + .resource = &overo_smsc911x_resources, + .dev = { + .platform_data = &overo_smsc911x_config, + }, +}; + +static inline void __init overo_init_smsc911x(void) +{ + unsigned long cs_mem_base; + + if (gpmc_cs_request(OVERO_SMSC911X_CS, SZ_16M, &cs_mem_base) < 0) { + printk(KERN_ERR "Failed request for GPMC mem for smsc911x\n"); + return; + } + + overo_smsc911x_resources[0].start = cs_mem_base + 0x0; + overo_smsc911x_resources[0].end = cs_mem_base + 0xff; + + if ((gpio_request(OVERO_SMSC911X_GPIO, "SMSC911X IRQ") == 0) && + (gpio_direction_input(OVERO_SMSC911X_GPIO) == 0)) { + gpio_export(OVERO_SMSC911X_GPIO, 0); + } else { + printk(KERN_ERR "could not obtain gpio for SMSC911X IRQ\n"); + return; + } + + overo_smsc911x_resources[1].start = OMAP_GPIO_IRQ(OVERO_SMSC911X_GPIO); + overo_smsc911x_resources[1].end = 0; + + platform_device_register(&overo_smsc911x_device); +} + +#else +static inline void __init overo_init_smsc911x(void) { return; } +#endif + static struct mtd_partition overo_nand_partitions[] = { { .name = "xloader", @@ -290,6 +354,7 @@ static void __init overo_init(void) overo_flash_init(); usb_musb_init(); overo_ads7846_init(); + overo_init_smsc911x(); if ((gpio_request(OVERO_GPIO_W2W_NRESET, "OVERO_GPIO_W2W_NRESET") == 0) && -- cgit v1.2.3