From 3ae5eaec1d2d9c0cf53745352e7d4b152810ba24 Mon Sep 17 00:00:00 2001 From: Russell King Date: Wed, 9 Nov 2005 22:32:44 +0000 Subject: [DRIVER MODEL] Convert platform drivers to use struct platform_driver This allows us to eliminate the casts in the drivers, and eventually remove the use of the device_driver function pointer methods for platform device drivers. Signed-off-by: Russell King Acked-by: Greg Kroah-Hartman --- arch/arm/mach-pxa/corgi_ssp.c | 17 +++++++++-------- 1 file changed, 9 insertions(+), 8 deletions(-) (limited to 'arch/arm/mach-pxa') diff --git a/arch/arm/mach-pxa/corgi_ssp.c b/arch/arm/mach-pxa/corgi_ssp.c index 591e5f32dbe..9f835f32b93 100644 --- a/arch/arm/mach-pxa/corgi_ssp.c +++ b/arch/arm/mach-pxa/corgi_ssp.c @@ -191,7 +191,7 @@ void __init corgi_ssp_set_machinfo(struct corgissp_machinfo *machinfo) ssp_machinfo = machinfo; } -static int __init corgi_ssp_probe(struct device *dev) +static int __init corgi_ssp_probe(struct platform_device *dev) { int ret; @@ -216,13 +216,13 @@ static int __init corgi_ssp_probe(struct device *dev) return ret; } -static int corgi_ssp_remove(struct device *dev) +static int corgi_ssp_remove(struct platform_device *dev) { ssp_exit(&corgi_ssp_dev); return 0; } -static int corgi_ssp_suspend(struct device *dev, pm_message_t state) +static int corgi_ssp_suspend(struct platform_device *dev, pm_message_t state) { ssp_flush(&corgi_ssp_dev); ssp_save_state(&corgi_ssp_dev,&corgi_ssp_state); @@ -230,7 +230,7 @@ static int corgi_ssp_suspend(struct device *dev, pm_message_t state) return 0; } -static int corgi_ssp_resume(struct device *dev) +static int corgi_ssp_resume(struct platform_device *dev) { GPSR(ssp_machinfo->cs_lcdcon) = GPIO_bit(ssp_machinfo->cs_lcdcon); /* High - Disable LCD Control/Timing Gen */ GPSR(ssp_machinfo->cs_max1111) = GPIO_bit(ssp_machinfo->cs_max1111); /* High - Disable MAX1111*/ @@ -241,18 +241,19 @@ static int corgi_ssp_resume(struct device *dev) return 0; } -static struct device_driver corgissp_driver = { - .name = "corgi-ssp", - .bus = &platform_bus_type, +static struct platform_driver corgissp_driver = { .probe = corgi_ssp_probe, .remove = corgi_ssp_remove, .suspend = corgi_ssp_suspend, .resume = corgi_ssp_resume, + .driver = { + .name = "corgi-ssp", + }, }; int __init corgi_ssp_init(void) { - return driver_register(&corgissp_driver); + return platform_driver_register(&corgissp_driver); } arch_initcall(corgi_ssp_init); -- cgit v1.2.3 From 078abcf95cdb95c78d786dbc61ae3c22ee70fb61 Mon Sep 17 00:00:00 2001 From: Richard Purdie Date: Thu, 10 Nov 2005 17:42:29 +0000 Subject: [ARM] 3096/1: Add SharpSL Zaurus power and battery management core driver Patch from Richard Purdie This patch adds a power and battery management core driver which with the addition of the right device files, supports the c7x0 and cxx00 series of Sharp Zaurus handhelds. The driver is complex for several reasons. Battery charging is manually monitored and controlled. When suspended, the device needs to periodically partially resume, check the charging status and then re-suspend. It does without bothering the higher linux layers as a full resume and re-suspend is unnecessary. The code is carefully written to avoid interrupts or calling code outside the module under these circumstances. It also vets the various wake up sources and monitors the device's power situation. Hooks to limit the backlight intensity and to notify the battery monitoring code of backlight events are connected/added as the backlight is one of the biggest users of power on the device. Signed-off-by: Richard Purdie Signed-off-by: Russell King --- arch/arm/mach-pxa/sharpsl.h | 87 ++++ arch/arm/mach-pxa/sharpsl_pm.c | 992 +++++++++++++++++++++++++++++++++++++++++ 2 files changed, 1079 insertions(+) create mode 100644 arch/arm/mach-pxa/sharpsl_pm.c (limited to 'arch/arm/mach-pxa') diff --git a/arch/arm/mach-pxa/sharpsl.h b/arch/arm/mach-pxa/sharpsl.h index 3977a77aacd..4879c0f7da7 100644 --- a/arch/arm/mach-pxa/sharpsl.h +++ b/arch/arm/mach-pxa/sharpsl.h @@ -32,3 +32,90 @@ void corgi_put_hsync(void); void spitz_put_hsync(void); void corgi_wait_hsync(void); void spitz_wait_hsync(void); + +/* + * SharpSL Battery/PM Driver + */ + +struct sharpsl_charger_machinfo { + void (*init)(void); + int gpio_acin; + int gpio_batfull; + int gpio_batlock; + int gpio_fatal; + int (*status_acin)(void); + void (*discharge)(int); + void (*discharge1)(int); + void (*charge)(int); + void (*chargeled)(int); + void (*measure_temp)(int); + void (*presuspend)(void); + void (*postsuspend)(void); + unsigned long (*charger_wakeup)(void); + int (*should_wakeup)(unsigned int resume_on_alarm); + int bat_levels; + struct battery_thresh *bat_levels_noac; + struct battery_thresh *bat_levels_acin; + int status_high_acin; + int status_low_acin; + int status_high_noac; + int status_low_noac; +}; + +struct battery_thresh { + int voltage; + int percentage; +}; + +struct battery_stat { + int ac_status; /* APM AC Present/Not Present */ + int mainbat_status; /* APM Main Battery Status */ + int mainbat_percent; /* Main Battery Percentage Charge */ + int mainbat_voltage; /* Main Battery Voltage */ +}; + +struct sharpsl_pm_status { + struct device *dev; + struct timer_list ac_timer; + struct timer_list chrg_full_timer; + + int charge_mode; +#define CHRG_ERROR (-1) +#define CHRG_OFF (0) +#define CHRG_ON (1) +#define CHRG_DONE (2) + + unsigned int flags; +#define SHARPSL_SUSPENDED (1 << 0) /* Device is Suspended */ +#define SHARPSL_ALARM_ACTIVE (1 << 1) /* Alarm is for charging event (not user) */ +#define SHARPSL_BL_LIMIT (1 << 2) /* Backlight Intensity Limited */ +#define SHARPSL_APM_QUEUED (1 << 3) /* APM Event Queued */ +#define SHARPSL_DO_OFFLINE_CHRG (1 << 4) /* Trigger the offline charger */ + + int full_count; + unsigned long charge_start_time; + struct sharpsl_charger_machinfo *machinfo; + struct battery_stat battstat; +}; + +extern struct sharpsl_pm_status sharpsl_pm; +extern struct battery_thresh spitz_battery_levels_acin[]; +extern struct battery_thresh spitz_battery_levels_noac[]; + +#define READ_GPIO_BIT(x) (GPLR(x) & GPIO_bit(x)) + +#define SHARPSL_LED_ERROR 2 +#define SHARPSL_LED_ON 1 +#define SHARPSL_LED_OFF 0 + +#define CHARGE_ON() sharpsl_pm.machinfo->charge(1) +#define CHARGE_OFF() sharpsl_pm.machinfo->charge(0) +#define CHARGE_LED_ON() sharpsl_pm.machinfo->chargeled(SHARPSL_LED_ON) +#define CHARGE_LED_OFF() sharpsl_pm.machinfo->chargeled(SHARPSL_LED_OFF) +#define CHARGE_LED_ERR() sharpsl_pm.machinfo->chargeled(SHARPSL_LED_ERROR) +#define DISCHARGE_ON() sharpsl_pm.machinfo->discharge(1) +#define DISCHARGE_OFF() sharpsl_pm.machinfo->discharge(0) +#define STATUS_AC_IN sharpsl_pm.machinfo->status_acin() +#define STATUS_BATT_LOCKED READ_GPIO_BIT(sharpsl_pm.machinfo->gpio_batlock) +#define STATUS_CHRG_FULL READ_GPIO_BIT(sharpsl_pm.machinfo->gpio_batfull) +#define STATUS_FATAL READ_GPIO_BIT(sharpsl_pm.machinfo->gpio_fatal) diff --git a/arch/arm/mach-pxa/sharpsl_pm.c b/arch/arm/mach-pxa/sharpsl_pm.c new file mode 100644 index 00000000000..6c9e871c53d --- /dev/null +++ b/arch/arm/mach-pxa/sharpsl_pm.c @@ -0,0 +1,992 @@ +/* + * Battery and Power Management code for the Sharp SL-C7xx and SL-Cxx00 + * series of PDAs + * + * Copyright (c) 2004-2005 Richard Purdie + * + * Based on code written by Sharp for 2.4 kernels + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + */ + +#undef DEBUG + +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include +#include +#include + +#include +#include +#include +#include "sharpsl.h" + +/* + * Constants + */ +#define SHARPSL_CHARGE_ON_TIME_INTERVAL (msecs_to_jiffies(1*60*1000)) /* 1 min */ +#define SHARPSL_CHARGE_FINISH_TIME (msecs_to_jiffies(10*60*1000)) /* 10 min */ +#define SHARPSL_BATCHK_TIME (msecs_to_jiffies(15*1000)) /* 15 sec */ +#define SHARPSL_BATCHK_TIME_SUSPEND (60*10) /* 10 min */ +#define SHARPSL_WAIT_CO_TIME 15 /* 15 sec */ +#define SHARPSL_WAIT_DISCHARGE_ON 100 /* 100 msec */ +#define SHARPSL_CHECK_BATTERY_WAIT_TIME_TEMP 10 /* 10 msec */ +#define SHARPSL_CHECK_BATTERY_WAIT_TIME_VOLT 10 /* 10 msec */ +#define SHARPSL_CHECK_BATTERY_WAIT_TIME_JKVAD 10 /* 10 msec */ +#define SHARPSL_CHARGE_WAIT_TIME 15 /* 15 msec */ +#define SHARPSL_CHARGE_CO_CHECK_TIME 5 /* 5 msec */ +#define SHARPSL_CHARGE_RETRY_CNT 1 /* eqv. 10 min */ + +#define SHARPSL_CHARGE_ON_VOLT 0x99 /* 2.9V */ +#define SHARPSL_CHARGE_ON_TEMP 0xe0 /* 2.9V */ +#define SHARPSL_CHARGE_ON_JKVAD_HIGH 0x9b /* 6V */ +#define SHARPSL_CHARGE_ON_JKVAD_LOW 0x34 /* 2V */ +#define SHARPSL_FATAL_ACIN_VOLT 182 /* 3.45V */ +#define SHARPSL_FATAL_NOACIN_VOLT 170 /* 3.40V */ + +struct battery_thresh spitz_battery_levels_acin[] = { + { 213, 100}, + { 212, 98}, + { 211, 95}, + { 210, 93}, + { 209, 90}, + { 208, 88}, + { 207, 85}, + { 206, 83}, + { 205, 80}, + { 204, 78}, + { 203, 75}, + { 202, 73}, + { 201, 70}, + { 200, 68}, + { 199, 65}, + { 198, 63}, + { 197, 60}, + { 196, 58}, + { 195, 55}, + { 194, 53}, + { 193, 50}, + { 192, 48}, + { 192, 45}, + { 191, 43}, + { 191, 40}, + { 190, 38}, + { 190, 35}, + { 189, 33}, + { 188, 30}, + { 187, 28}, + { 186, 25}, + { 185, 23}, + { 184, 20}, + { 183, 18}, + { 182, 15}, + { 181, 13}, + { 180, 10}, + { 179, 8}, + { 178, 5}, + { 0, 0}, +}; + +struct battery_thresh spitz_battery_levels_noac[] = { + { 213, 100}, + { 212, 98}, + { 211, 95}, + { 210, 93}, + { 209, 90}, + { 208, 88}, + { 207, 85}, + { 206, 83}, + { 205, 80}, + { 204, 78}, + { 203, 75}, + { 202, 73}, + { 201, 70}, + { 200, 68}, + { 199, 65}, + { 198, 63}, + { 197, 60}, + { 196, 58}, + { 195, 55}, + { 194, 53}, + { 193, 50}, + { 192, 48}, + { 191, 45}, + { 190, 43}, + { 189, 40}, + { 188, 38}, + { 187, 35}, + { 186, 33}, + { 185, 30}, + { 184, 28}, + { 183, 25}, + { 182, 23}, + { 181, 20}, + { 180, 18}, + { 179, 15}, + { 178, 13}, + { 177, 10}, + { 176, 8}, + { 175, 5}, + { 0, 0}, +}; + +/* MAX1111 Commands */ +#define MAXCTRL_PD0 1u << 0 +#define MAXCTRL_PD1 1u << 1 +#define MAXCTRL_SGL 1u << 2 +#define MAXCTRL_UNI 1u << 3 +#define MAXCTRL_SEL_SH 4 +#define MAXCTRL_STR 1u << 7 + +/* MAX1111 Channel Definitions */ +#define BATT_AD 4u +#define BATT_THM 2u +#define JK_VAD 6u + + +/* + * Prototypes + */ +static int sharpsl_read_MainBattery(void); +static int sharpsl_off_charge_battery(void); +static int sharpsl_check_battery(int mode); +static int sharpsl_ac_check(void); +static int sharpsl_fatal_check(void); +static int sharpsl_average_value(int ad); +static void sharpsl_average_clear(void); +static void sharpsl_charge_toggle(void *private_); +static void sharpsl_battery_thread(void *private_); + + +/* + * Variables + */ +struct sharpsl_pm_status sharpsl_pm; +DECLARE_WORK(toggle_charger, sharpsl_charge_toggle, NULL); +DECLARE_WORK(sharpsl_bat, sharpsl_battery_thread, NULL); + + +static int get_percentage(int voltage) +{ + int i = sharpsl_pm.machinfo->bat_levels - 1; + struct battery_thresh *thresh; + + if (sharpsl_pm.charge_mode == CHRG_ON) + thresh=sharpsl_pm.machinfo->bat_levels_acin; + else + thresh=sharpsl_pm.machinfo->bat_levels_noac; + + while (i > 0 && (voltage > thresh[i].voltage)) + i--; + + return thresh[i].percentage; +} + +static int get_apm_status(int voltage) +{ + int low_thresh, high_thresh; + + if (sharpsl_pm.charge_mode == CHRG_ON) { + high_thresh = sharpsl_pm.machinfo->status_high_acin; + low_thresh = sharpsl_pm.machinfo->status_low_acin; + } else { + high_thresh = sharpsl_pm.machinfo->status_high_noac; + low_thresh = sharpsl_pm.machinfo->status_low_noac; + } + + if (voltage >= high_thresh) + return APM_BATTERY_STATUS_HIGH; + if (voltage >= low_thresh) + return APM_BATTERY_STATUS_LOW; + return APM_BATTERY_STATUS_CRITICAL; +} + +void sharpsl_battery_kick(void) +{ + schedule_delayed_work(&sharpsl_bat, msecs_to_jiffies(125)); +} +EXPORT_SYMBOL(sharpsl_battery_kick); + + +static void sharpsl_battery_thread(void *private_) +{ + int voltage, percent, apm_status, i = 0; + + if (!sharpsl_pm.machinfo) + return; + + sharpsl_pm.battstat.ac_status = (!(STATUS_AC_IN) ? APM_AC_OFFLINE : APM_AC_ONLINE); + + /* Corgi cannot confirm when battery fully charged so periodically kick! */ + if (machine_is_corgi() && (sharpsl_pm.charge_mode == CHRG_ON) + && time_after(jiffies, sharpsl_pm.charge_start_time + SHARPSL_CHARGE_ON_TIME_INTERVAL)) + schedule_work(&toggle_charger); + + while(1) { + voltage = sharpsl_read_MainBattery(); + if (voltage > 0) break; + if (i++ > 5) { + voltage = sharpsl_pm.machinfo->bat_levels_noac[0].voltage; + dev_warn(sharpsl_pm.dev, "Warning: Cannot read main battery!\n"); + break; + } + } + + voltage = sharpsl_average_value(voltage); + apm_status = get_apm_status(voltage); + percent = get_percentage(voltage); + + /* At low battery voltages, the voltage has a tendency to start + creeping back up so we try to avoid this here */ + if ((sharpsl_pm.battstat.ac_status == APM_AC_ONLINE) || (apm_status == APM_BATTERY_STATUS_HIGH) || percent <= sharpsl_pm.battstat.mainbat_percent) { + sharpsl_pm.battstat.mainbat_voltage = voltage; + sharpsl_pm.battstat.mainbat_status = apm_status; + sharpsl_pm.battstat.mainbat_percent = percent; + } + + dev_dbg(sharpsl_pm.dev, "Battery: voltage: %d, status: %d, percentage: %d, time: %d\n", voltage, + sharpsl_pm.battstat.mainbat_status, sharpsl_pm.battstat.mainbat_percent, jiffies); + + /* If battery is low. limit backlight intensity to save power. */ + if ((sharpsl_pm.battstat.ac_status != APM_AC_ONLINE) + && ((sharpsl_pm.battstat.mainbat_status == APM_BATTERY_STATUS_LOW) || + (sharpsl_pm.battstat.mainbat_status == APM_BATTERY_STATUS_CRITICAL))) { + if (!(sharpsl_pm.flags & SHARPSL_BL_LIMIT)) { + corgibl_limit_intensity(1); + sharpsl_pm.flags |= SHARPSL_BL_LIMIT; + } + } else if (sharpsl_pm.flags & SHARPSL_BL_LIMIT) { + corgibl_limit_intensity(0); + sharpsl_pm.flags &= ~SHARPSL_BL_LIMIT; + } + + /* Suspend if critical battery level */ + if ((sharpsl_pm.battstat.ac_status != APM_AC_ONLINE) + && (sharpsl_pm.battstat.mainbat_status == APM_BATTERY_STATUS_CRITICAL) + && !(sharpsl_pm.flags & SHARPSL_APM_QUEUED)) { + sharpsl_pm.flags |= SHARPSL_APM_QUEUED; + dev_err(sharpsl_pm.dev, "Fatal Off\n"); + apm_queue_event(APM_CRITICAL_SUSPEND); + } + + schedule_delayed_work(&sharpsl_bat, SHARPSL_BATCHK_TIME); +} + +static void sharpsl_charge_on(void) +{ + dev_dbg(sharpsl_pm.dev, "Turning Charger On\n"); + + sharpsl_pm.full_count = 0; + sharpsl_pm.charge_mode = CHRG_ON; + schedule_delayed_work(&toggle_charger, msecs_to_jiffies(250)); + schedule_delayed_work(&sharpsl_bat, msecs_to_jiffies(500)); +} + +static void sharpsl_charge_off(void) +{ + dev_dbg(sharpsl_pm.dev, "Turning Charger Off\n"); + + CHARGE_OFF(); + CHARGE_LED_OFF(); + sharpsl_pm.charge_mode = CHRG_OFF; + + schedule_work(&sharpsl_bat); +} + +static void sharpsl_charge_error(void) +{ + CHARGE_LED_ERR(); + CHARGE_OFF(); + sharpsl_pm.charge_mode = CHRG_ERROR; +} + +static void sharpsl_charge_toggle(void *private_) +{ + dev_dbg(sharpsl_pm.dev, "Toogling Charger at time: %lx\n", jiffies); + + if (STATUS_AC_IN == 0) { + sharpsl_charge_off(); + return; + } else if ((sharpsl_check_battery(1) < 0) || (sharpsl_ac_check() < 0)) { + sharpsl_charge_error(); + return; + } + + CHARGE_LED_ON(); + CHARGE_OFF(); + mdelay(SHARPSL_CHARGE_WAIT_TIME); + CHARGE_ON(); + + sharpsl_pm.charge_start_time = jiffies; +} + +static void sharpsl_ac_timer(unsigned long data) +{ + int acin = STATUS_AC_IN; + + dev_dbg(sharpsl_pm.dev, "AC Status: %d\n",acin); + + sharpsl_average_clear(); + if (acin && (sharpsl_pm.charge_mode != CHRG_ON)) + sharpsl_charge_on(); + else if (sharpsl_pm.charge_mode == CHRG_ON) + sharpsl_charge_off(); + + schedule_work(&sharpsl_bat); +} + + +static irqreturn_t sharpsl_ac_isr(int irq, void *dev_id, struct pt_regs *fp) +{ + /* Delay the event slightly to debounce */ + /* Must be a smaller delay than the chrg_full_isr below */ + mod_timer(&sharpsl_pm.ac_timer, jiffies + msecs_to_jiffies(250)); + + return IRQ_HANDLED; +} + +static void sharpsl_chrg_full_timer(unsigned long data) +{ + dev_dbg(sharpsl_pm.dev, "Charge Full at time: %lx\n", jiffies); + + sharpsl_pm.full_count++; + + if (STATUS_AC_IN == 0) { + dev_dbg(sharpsl_pm.dev, "Charge Full: AC removed - stop charging!\n"); + if (sharpsl_pm.charge_mode == CHRG_ON) + sharpsl_charge_off(); + } else if (sharpsl_pm.full_count < 2) { + dev_dbg(sharpsl_pm.dev, "Charge Full: Count too low\n"); + schedule_work(&toggle_charger); + } else if (time_after(jiffies, sharpsl_pm.charge_start_time + SHARPSL_CHARGE_FINISH_TIME)) { + dev_dbg(sharpsl_pm.dev, "Charge Full: Interrupt generated too slowly - retry.\n"); + schedule_work(&toggle_charger); + } else { + sharpsl_charge_off(); + sharpsl_pm.charge_mode = CHRG_DONE; + dev_dbg(sharpsl_pm.dev, "Charge Full: Charging Finished\n"); + } +} + +/* Charging Finished Interrupt (Not present on Corgi) */ +/* Can trigger at the same time as an AC staus change so + delay until after that has been processed */ +static irqreturn_t sharpsl_chrg_full_isr(int irq, void *dev_id, struct pt_regs *fp) +{ + if (sharpsl_pm.flags & SHARPSL_SUSPENDED) + return IRQ_HANDLED; + + /* delay until after any ac interrupt */ + mod_timer(&sharpsl_pm.chrg_full_timer, jiffies + msecs_to_jiffies(500)); + + return IRQ_HANDLED; +} + +static irqreturn_t sharpsl_fatal_isr(int irq, void *dev_id, struct pt_regs *fp) +{ + int is_fatal = 0; + + if (STATUS_BATT_LOCKED == 0) { + dev_err(sharpsl_pm.dev, "Battery now Unlocked! Suspending.\n"); + is_fatal = 1; + } + + if (sharpsl_pm.machinfo->gpio_fatal && (STATUS_FATAL == 0)) { + dev_err(sharpsl_pm.dev, "Fatal Batt Error! Suspending.\n"); + is_fatal = 1; + } + + if (!(sharpsl_pm.flags & SHARPSL_APM_QUEUED) && is_fatal) { + sharpsl_pm.flags |= SHARPSL_APM_QUEUED; + apm_queue_event(APM_CRITICAL_SUSPEND); + } + + return IRQ_HANDLED; +} + +/* + * Maintain an average of the last 10 readings + */ +#define SHARPSL_CNV_VALUE_NUM 10 +static int sharpsl_ad_index; + +static void sharpsl_average_clear(void) +{ + sharpsl_ad_index = 0; +} + +static int sharpsl_average_value(int ad) +{ + int i, ad_val = 0; + static int sharpsl_ad[SHARPSL_CNV_VALUE_NUM+1]; + + if (sharpsl_pm.battstat.mainbat_status != APM_BATTERY_STATUS_HIGH) { + sharpsl_ad_index = 0; + return ad; + } + + sharpsl_ad[sharpsl_ad_index] = ad; + sharpsl_ad_index++; + if (sharpsl_ad_index >= SHARPSL_CNV_VALUE_NUM) { + for (i=0; i < (SHARPSL_CNV_VALUE_NUM-1); i++) + sharpsl_ad[i] = sharpsl_ad[i+1]; + sharpsl_ad_index = SHARPSL_CNV_VALUE_NUM - 1; + } + for (i=0; i < sharpsl_ad_index; i++) + ad_val += sharpsl_ad[i]; + + return (ad_val / sharpsl_ad_index); +} + + +/* + * Read MAX1111 ADC + */ +static int read_max1111(int channel) +{ + return corgi_ssp_max1111_get((channel << MAXCTRL_SEL_SH) | MAXCTRL_PD0 | MAXCTRL_PD1 + | MAXCTRL_SGL | MAXCTRL_UNI | MAXCTRL_STR); +} + +static int sharpsl_read_MainBattery(void) +{ + return read_max1111(BATT_AD); +} + +static int sharpsl_read_Temp(void) +{ + int temp; + + sharpsl_pm.machinfo->measure_temp(1); + + mdelay(SHARPSL_CHECK_BATTERY_WAIT_TIME_TEMP); + temp = read_max1111(BATT_THM); + + sharpsl_pm.machinfo->measure_temp(0); + + return temp; +} + +static int sharpsl_read_jkvad(void) +{ + return read_max1111(JK_VAD); +} + +/* + * Take an array of 5 integers, remove the maximum and minimum values + * and return the average. + */ +static int get_select_val(int *val) +{ + int i, j, k, temp, sum = 0; + + /* Find MAX val */ + temp = val[0]; + j=0; + for (i=1; i<5; i++) { + if (temp < val[i]) { + temp = val[i]; + j = i; + } + } + + /* Find MIN val */ + temp = val[4]; + k=4; + for (i=3; i>=0; i--) { + if (temp > val[i]) { + temp = val[i]; + k = i; + } + } + + for (i=0; i<5; i++) + if (i != j && i != k ) + sum += val[i]; + + dev_dbg(sharpsl_pm.dev, "Average: %d from values: %d, %d, %d, %d, %d\n", sum/3, val[0], val[1], val[2], val[3], val[4]); + + return (sum/3); +} + +/* mode 0 - Check temperature and voltage + * 1 - Check temperature only */ +static int sharpsl_check_battery(int mode) +{ + int val, i, buff[5]; + + /* Check battery temperature */ + for (i=0; i<5; i++) { + mdelay(SHARPSL_CHECK_BATTERY_WAIT_TIME_TEMP); + buff[i] = sharpsl_read_Temp(); + } + + val = get_select_val(buff); + + dev_dbg(sharpsl_pm.dev, "Temperature: %d\n", val); + if (val > SHARPSL_CHARGE_ON_TEMP) + return -1; + if (mode == 1) + return 0; + + /* disable charge, enable discharge */ + CHARGE_OFF(); + DISCHARGE_ON(); + mdelay(SHARPSL_WAIT_DISCHARGE_ON); + + if (sharpsl_pm.machinfo->discharge1) + sharpsl_pm.machinfo->discharge1(1); + + /* Check battery voltage */ + for (i=0; i<5; i++) { + buff[i] = sharpsl_read_MainBattery(); + mdelay(SHARPSL_CHECK_BATTERY_WAIT_TIME_VOLT); + } + + if (sharpsl_pm.machinfo->discharge1) + sharpsl_pm.machinfo->discharge1(0); + + DISCHARGE_OFF(); + + val = get_select_val(buff); + dev_dbg(sharpsl_pm.dev, "Battery Voltage: %d\n", val); + + if (val < SHARPSL_CHARGE_ON_VOLT) + return -1; + + return 0; +} + +static int sharpsl_ac_check(void) +{ + int temp, i, buff[5]; + + for (i=0; i<5; i++) { + buff[i] = sharpsl_read_jkvad(); + mdelay(SHARPSL_CHECK_BATTERY_WAIT_TIME_JKVAD); + } + + temp = get_select_val(buff); + dev_dbg(sharpsl_pm.dev, "AC Voltage: %d\n",temp); + + if ((temp > SHARPSL_CHARGE_ON_JKVAD_HIGH) || (temp < SHARPSL_CHARGE_ON_JKVAD_LOW)) { + dev_err(sharpsl_pm.dev, "Error: AC check failed.\n"); + return -1; + } + + return 0; +} + +#ifdef CONFIG_PM +static int sharpsl_pm_suspend(struct device *dev, pm_message_t state) +{ + sharpsl_pm.flags |= SHARPSL_SUSPENDED; + flush_scheduled_work(); + + if (sharpsl_pm.charge_mode == CHRG_ON) + sharpsl_pm.flags |= SHARPSL_DO_OFFLINE_CHRG; + else + sharpsl_pm.flags &= ~SHARPSL_DO_OFFLINE_CHRG; + + return 0; +} + +static int sharpsl_pm_resume(struct device *dev) +{ + /* Clear the reset source indicators as they break the bootloader upon reboot */ + RCSR = 0x0f; + sharpsl_average_clear(); + sharpsl_pm.flags &= ~SHARPSL_APM_QUEUED; + sharpsl_pm.flags &= ~SHARPSL_SUSPENDED; + + return 0; +} + +static void corgi_goto_sleep(unsigned long alarm_time, unsigned int alarm_enable, suspend_state_t state) +{ + dev_dbg(sharpsl_pm.dev, "Time is: %08x\n",RCNR); + + dev_dbg(sharpsl_pm.dev, "Offline Charge Activate = %d\n",sharpsl_pm.flags & SHARPSL_DO_OFFLINE_CHRG); + /* not charging and AC-IN! */ + + if ((sharpsl_pm.flags & SHARPSL_DO_OFFLINE_CHRG) && (STATUS_AC_IN != 0)) { + dev_dbg(sharpsl_pm.dev, "Activating Offline Charger...\n"); + sharpsl_pm.charge_mode = CHRG_OFF; + sharpsl_pm.flags &= ~SHARPSL_DO_OFFLINE_CHRG; + sharpsl_off_charge_battery(); + } + + sharpsl_pm.machinfo->presuspend(); + + PEDR = 0xffffffff; /* clear it */ + + sharpsl_pm.flags &= ~SHARPSL_ALARM_ACTIVE; + if ((sharpsl_pm.charge_mode == CHRG_ON) && ((alarm_enable && ((alarm_time - RCNR) > (SHARPSL_BATCHK_TIME_SUSPEND + 30))) || !alarm_enable)) { + RTSR &= RTSR_ALE; + RTAR = RCNR + SHARPSL_BATCHK_TIME_SUSPEND; + dev_dbg(sharpsl_pm.dev, "Charging alarm at: %08x\n",RTAR); + sharpsl_pm.flags |= SHARPSL_ALARM_ACTIVE; + } else if (alarm_enable) { + RTSR &= RTSR_ALE; + RTAR = alarm_time; + dev_dbg(sharpsl_pm.dev, "User alarm at: %08x\n",RTAR); + } else { + dev_dbg(sharpsl_pm.dev, "No alarms set.\n"); + } + + pxa_pm_enter(state); + + sharpsl_pm.machinfo->postsuspend(); + + dev_dbg(sharpsl_pm.dev, "Corgi woken up from suspend: %08x\n",PEDR); +} + +static int corgi_enter_suspend(unsigned long alarm_time, unsigned int alarm_enable, suspend_state_t state) +{ + if (!sharpsl_pm.machinfo->should_wakeup(!(sharpsl_pm.flags & SHARPSL_ALARM_ACTIVE) && alarm_enable) ) + { + if (!(sharpsl_pm.flags & SHARPSL_ALARM_ACTIVE)) { + dev_dbg(sharpsl_pm.dev, "No user triggered wakeup events and not charging. Strange. Suspend.\n"); + corgi_goto_sleep(alarm_time, alarm_enable, state); + return 1; + } + if(sharpsl_off_charge_battery()) { + dev_dbg(sharpsl_pm.dev, "Charging. Suspend...\n"); + corgi_goto_sleep(alarm_time, alarm_enable, state); + return 1; + } + dev_dbg(sharpsl_pm.dev, "User triggered wakeup in offline charger.\n"); + } + + if ((STATUS_BATT_LOCKED == 0) || (sharpsl_fatal_check() < 0) ) + { + dev_err(sharpsl_pm.dev, "Fatal condition. Suspend.\n"); + corgi_goto_sleep(alarm_time, alarm_enable, state); + return 1; + } + + return 0; +} + +static int corgi_pxa_pm_enter(suspend_state_t state) +{ + unsigned long alarm_time = RTAR; + unsigned int alarm_status = ((RTSR & RTSR_ALE) != 0); + + dev_dbg(sharpsl_pm.dev, "SharpSL suspending for first time.\n"); + + corgi_goto_sleep(alarm_time, alarm_status, state); + + while (corgi_enter_suspend(alarm_time,alarm_status,state)) + {} + + dev_dbg(sharpsl_pm.dev, "SharpSL resuming...\n"); + + return 0; +} +#endif + + +/* + * Check for fatal battery errors + * Fatal returns -1 + */ +static int sharpsl_fatal_check(void) +{ + int buff[5], temp, i, acin; + + dev_dbg(sharpsl_pm.dev, "sharpsl_fatal_check entered\n"); + + /* Check AC-Adapter */ + acin = STATUS_AC_IN; + + if (acin && (sharpsl_pm.charge_mode == CHRG_ON)) { + CHARGE_OFF(); + udelay(100); + DISCHARGE_ON(); /* enable discharge */ + mdelay(SHARPSL_WAIT_DISCHARGE_ON); + } + + if (sharpsl_pm.machinfo->discharge1) + sharpsl_pm.machinfo->discharge1(1); + + /* Check battery : check inserting battery ? */ + for (i=0; i<5; i++) { + buff[i] = sharpsl_read_MainBattery(); + mdelay(SHARPSL_CHECK_BATTERY_WAIT_TIME_VOLT); + } + + if (sharpsl_pm.machinfo->discharge1) + sharpsl_pm.machinfo->discharge1(0); + + if (acin && (sharpsl_pm.charge_mode == CHRG_ON)) { + udelay(100); + CHARGE_ON(); + DISCHARGE_OFF(); + } + + temp = get_select_val(buff); + dev_dbg(sharpsl_pm.dev, "sharpsl_fatal_check: acin: %d, discharge voltage: %d, no discharge: %d\n", acin, temp, sharpsl_read_MainBattery()); + + if ((acin && (temp < SHARPSL_FATAL_ACIN_VOLT)) || + (!acin && (temp < SHARPSL_FATAL_NOACIN_VOLT))) + return -1; + return 0; +} + +static int sharpsl_off_charge_error(void) +{ + dev_err(sharpsl_pm.dev, "Offline Charger: Error occured.\n"); + CHARGE_OFF(); + CHARGE_LED_ERR(); + sharpsl_pm.charge_mode = CHRG_ERROR; + return 1; +} + +/* + * Charging Control while suspended + * Return 1 - go straight to sleep + * Return 0 - sleep or wakeup depending on other factors + */ +static int sharpsl_off_charge_battery(void) +{ + int time; + + dev_dbg(sharpsl_pm.dev, "Charge Mode: %d\n", sharpsl_pm.charge_mode); + + if (sharpsl_pm.charge_mode == CHRG_OFF) { + dev_dbg(sharpsl_pm.dev, "Offline Charger: Step 1\n"); + + /* AC Check */ + if ((sharpsl_ac_check() < 0) || (sharpsl_check_battery(1) < 0)) + return sharpsl_off_charge_error(); + + /* Start Charging */ + CHARGE_LED_ON(); + CHARGE_OFF(); + mdelay(SHARPSL_CHARGE_WAIT_TIME); + CHARGE_ON(); + + sharpsl_pm.charge_mode = CHRG_ON; + sharpsl_pm.full_count = 0; + + return 1; + } else if (sharpsl_pm.charge_mode != CHRG_ON) { + return 1; + } + + if (sharpsl_pm.full_count == 0) { + int time; + + dev_dbg(sharpsl_pm.dev, "Offline Charger: Step 2\n"); + + if (sharpsl_check_battery(0) < 0) + return sharpsl_off_charge_error(); + + CHARGE_OFF(); + mdelay(SHARPSL_CHARGE_WAIT_TIME); + CHARGE_ON(); + sharpsl_pm.charge_mode = CHRG_ON; + + mdelay(SHARPSL_CHARGE_CO_CHECK_TIME); + + time = RCNR; + while(1) { + /* Check if any wakeup event had occured */ + if (sharpsl_pm.machinfo->charger_wakeup() != 0) + return 0; + /* Check for timeout */ + if ((RCNR - time) > SHARPSL_WAIT_CO_TIME) + return 1; + if (STATUS_CHRG_FULL) { + dev_dbg(sharpsl_pm.dev, "Offline Charger: Charge full occured. Retrying to check\n"); + sharpsl_pm.full_count++; + CHARGE_OFF(); + mdelay(SHARPSL_CHARGE_WAIT_TIME); + CHARGE_ON(); + return 1; + } + } + } + + dev_dbg(sharpsl_pm.dev, "Offline Charger: Step 3\n"); + + mdelay(SHARPSL_CHARGE_CO_CHECK_TIME); + + time = RCNR; + while(1) { + /* Check if any wakeup event had occured */ + if (sharpsl_pm.machinfo->charger_wakeup() != 0) + return 0; + /* Check for timeout */ + if ((RCNR-time) > SHARPSL_WAIT_CO_TIME) { + if (sharpsl_pm.full_count > SHARPSL_CHARGE_RETRY_CNT) { + dev_dbg(sharpsl_pm.dev, "Offline Charger: Not charged sufficiently. Retrying.\n"); + sharpsl_pm.full_count = 0; + } + sharpsl_pm.full_count++; + return 1; + } + if (STATUS_CHRG_FULL) { + dev_dbg(sharpsl_pm.dev, "Offline Charger: Charging complete.\n"); + CHARGE_LED_OFF(); + CHARGE_OFF(); + sharpsl_pm.charge_mode = CHRG_DONE; + return 1; + } + } +} + + +static ssize_t battery_percentage_show(struct device *dev, struct device_attribute *attr, char *buf) +{ + return sprintf(buf, "%d\n",sharpsl_pm.battstat.mainbat_percent); +} + +static ssize_t battery_voltage_show(struct device *dev, struct device_attribute *attr, char *buf) +{ + return sprintf(buf, "%d\n",sharpsl_pm.battstat.mainbat_voltage); +} + +static DEVICE_ATTR(battery_percentage, 0444, battery_percentage_show, NULL); +static DEVICE_ATTR(battery_voltage, 0444, battery_voltage_show, NULL); + +extern void (*apm_get_power_status)(struct apm_power_info *); + +static void sharpsl_apm_get_power_status(struct apm_power_info *info) +{ + info->ac_line_status = sharpsl_pm.battstat.ac_status; + + if (sharpsl_pm.charge_mode == CHRG_ON) + info->battery_status = APM_BATTERY_STATUS_CHARGING; + else + info->battery_status = sharpsl_pm.battstat.mainbat_status; + + info->battery_flag = (1 << info->battery_status); + info->battery_life = sharpsl_pm.battstat.mainbat_percent; +} + +static struct pm_ops sharpsl_pm_ops = { + .pm_disk_mode = PM_DISK_FIRMWARE, + .prepare = pxa_pm_prepare, + .enter = corgi_pxa_pm_enter, + .finish = pxa_pm_finish, +}; + +static int __init sharpsl_pm_probe(struct device *dev) +{ + if (!dev->platform_data) + return -EINVAL; + + sharpsl_pm.dev = dev; + sharpsl_pm.machinfo = dev->platform_data; + sharpsl_pm.charge_mode = CHRG_OFF; + sharpsl_pm.flags = 0; + + sharpsl_pm.machinfo->init(); + + init_timer(&sharpsl_pm.ac_timer); + sharpsl_pm.ac_timer.function = sharpsl_ac_timer; + + init_timer(&sharpsl_pm.chrg_full_timer); + sharpsl_pm.chrg_full_timer.function = sharpsl_chrg_full_timer; + + pxa_gpio_mode(sharpsl_pm.machinfo->gpio_acin | GPIO_IN); + pxa_gpio_mode(sharpsl_pm.machinfo->gpio_batfull | GPIO_IN); + pxa_gpio_mode(sharpsl_pm.machinfo->gpio_batlock | GPIO_IN); + + /* Register interrupt handlers */ + if (request_irq(IRQ_GPIO(sharpsl_pm.machinfo->gpio_acin), sharpsl_ac_isr, SA_INTERRUPT, "AC Input Detect", sharpsl_ac_isr)) { + dev_err(sharpsl_pm.dev, "Could not get irq %d.\n", IRQ_GPIO(sharpsl_pm.machinfo->gpio_acin)); + } + else set_irq_type(IRQ_GPIO(sharpsl_pm.machinfo->gpio_acin),IRQT_BOTHEDGE); + + if (request_irq(IRQ_GPIO(sharpsl_pm.machinfo->gpio_batlock), sharpsl_fatal_isr, SA_INTERRUPT, "Battery Cover", sharpsl_fatal_isr)) { + dev_err(sharpsl_pm.dev, "Could not get irq %d.\n", IRQ_GPIO(sharpsl_pm.machinfo->gpio_batlock)); + } + else set_irq_type(IRQ_GPIO(sharpsl_pm.machinfo->gpio_batlock),IRQT_FALLING); + + if (sharpsl_pm.machinfo->gpio_fatal) { + if (request_irq(IRQ_GPIO(sharpsl_pm.machinfo->gpio_fatal), sharpsl_fatal_isr, SA_INTERRUPT, "Fatal Battery", sharpsl_fatal_isr)) { + dev_err(sharpsl_pm.dev, "Could not get irq %d.\n", IRQ_GPIO(sharpsl_pm.machinfo->gpio_fatal)); + } + else set_irq_type(IRQ_GPIO(sharpsl_pm.machinfo->gpio_fatal),IRQT_FALLING); + } + + if (!machine_is_corgi()) + { + /* Register interrupt handler. */ + if (request_irq(IRQ_GPIO(sharpsl_pm.machinfo->gpio_batfull), sharpsl_chrg_full_isr, SA_INTERRUPT, "CO", sharpsl_chrg_full_isr)) { + dev_err(sharpsl_pm.dev, "Could not get irq %d.\n", IRQ_GPIO(sharpsl_pm.machinfo->gpio_batfull)); + } + else set_irq_type(IRQ_GPIO(sharpsl_pm.machinfo->gpio_batfull),IRQT_RISING); + } + + device_create_file(dev, &dev_attr_battery_percentage); + device_create_file(dev, &dev_attr_battery_voltage); + + apm_get_power_status = sharpsl_apm_get_power_status; + + pm_set_ops(&sharpsl_pm_ops); + + mod_timer(&sharpsl_pm.ac_timer, jiffies + msecs_to_jiffies(250)); + + return 0; +} + +static int sharpsl_pm_remove(struct device *dev) +{ + pm_set_ops(NULL); + + device_remove_file(dev, &dev_attr_battery_percentage); + device_remove_file(dev, &dev_attr_battery_voltage); + + free_irq(IRQ_GPIO(sharpsl_pm.machinfo->gpio_acin), sharpsl_ac_isr); + free_irq(IRQ_GPIO(sharpsl_pm.machinfo->gpio_batlock), sharpsl_fatal_isr); + + if (sharpsl_pm.machinfo->gpio_fatal) + free_irq(IRQ_GPIO(sharpsl_pm.machinfo->gpio_fatal), sharpsl_fatal_isr); + + if (!machine_is_corgi()) + free_irq(IRQ_GPIO(sharpsl_pm.machinfo->gpio_batfull), sharpsl_chrg_full_isr); + + del_timer_sync(&sharpsl_pm.chrg_full_timer); + del_timer_sync(&sharpsl_pm.ac_timer); + + return 0; +} + +static struct device_driver sharpsl_pm_driver = { + .name = "sharpsl-pm", + .bus = &platform_bus_type, + .probe = sharpsl_pm_probe, + .remove = sharpsl_pm_remove, + .suspend = sharpsl_pm_suspend, + .resume = sharpsl_pm_resume, +}; + +static int __devinit sharpsl_pm_init(void) +{ + return driver_register(&sharpsl_pm_driver); +} + +static void sharpsl_pm_exit(void) +{ + driver_unregister(&sharpsl_pm_driver); +} + +late_initcall(sharpsl_pm_init); +module_exit(sharpsl_pm_exit); -- cgit v1.2.3 From b216c01829d0b73a468204e2e763c0a818b77a46 Mon Sep 17 00:00:00 2001 From: Liam Girdwood Date: Thu, 10 Nov 2005 17:45:39 +0000 Subject: [ARM] 3098/1: pxa2xx disable ssp irq Patch from Liam Girdwood This patch allows users of the pxa SSP driver to register their own irq handlers instead of using the default SSP handler. It also cleans up the CKEN clock and irq detection as the values are now stored in a table. This patch replaces 2845/1 Changes:- o Added flags parameter to ssp_init() o Added SSP_NO_IRQ flag to disable registering of ssp irq handler (for drivers that want to register their own handler) o Cleaned up clock and irq detection, values are now stored in table. o Added build changes to allow other drivers (e.g audio) to select the ssp driver. o corgi_ssp.c changed to use new interface. Signed-off-by: Liam Girdwood Signed-off-by: Richard Purdie Signed-off-by: Russell King --- arch/arm/mach-pxa/Kconfig | 7 +++ arch/arm/mach-pxa/Makefile | 5 +- arch/arm/mach-pxa/corgi_ssp.c | 2 +- arch/arm/mach-pxa/ssp.c | 128 +++++++++++++----------------------------- 4 files changed, 51 insertions(+), 91 deletions(-) (limited to 'arch/arm/mach-pxa') diff --git a/arch/arm/mach-pxa/Kconfig b/arch/arm/mach-pxa/Kconfig index b380a438e68..e201aa9765b 100644 --- a/arch/arm/mach-pxa/Kconfig +++ b/arch/arm/mach-pxa/Kconfig @@ -60,6 +60,7 @@ config MACH_CORGI bool "Enable Sharp SL-C700 (Corgi) Support" depends PXA_SHARPSL_25x select PXA_SHARP_C7xx + select PXA_SSP config MACH_SHEPHERD bool "Enable Sharp SL-C750 (Shepherd) Support" @@ -102,12 +103,18 @@ config IWMMXT config PXA_SHARP_C7xx bool + select PXA_SSP help Enable support for all Sharp C7xx models config PXA_SHARP_Cxx00 bool + select PXA_SSP help Enable common support for Sharp Cxx00 models +config PXA_SSP + tristate + help + Enable support for PXA2xx SSP ports endif diff --git a/arch/arm/mach-pxa/Makefile b/arch/arm/mach-pxa/Makefile index 8bc72d07cea..d210bd5032c 100644 --- a/arch/arm/mach-pxa/Makefile +++ b/arch/arm/mach-pxa/Makefile @@ -11,8 +11,8 @@ obj-$(CONFIG_PXA27x) += pxa27x.o obj-$(CONFIG_ARCH_LUBBOCK) += lubbock.o obj-$(CONFIG_MACH_MAINSTONE) += mainstone.o obj-$(CONFIG_ARCH_PXA_IDP) += idp.o -obj-$(CONFIG_PXA_SHARP_C7xx) += corgi.o corgi_ssp.o corgi_lcd.o ssp.o -obj-$(CONFIG_PXA_SHARP_Cxx00) += spitz.o corgi_ssp.o corgi_lcd.o ssp.o +obj-$(CONFIG_PXA_SHARP_C7xx) += corgi.o corgi_ssp.o corgi_lcd.o +obj-$(CONFIG_PXA_SHARP_Cxx00) += spitz.o corgi_ssp.o corgi_lcd.o obj-$(CONFIG_MACH_POODLE) += poodle.o obj-$(CONFIG_MACH_TOSA) += tosa.o @@ -26,6 +26,7 @@ obj-$(CONFIG_LEDS) += $(led-y) # Misc features obj-$(CONFIG_PM) += pm.o sleep.o +obj-$(CONFIG_PXA_SSP) += ssp.o ifeq ($(CONFIG_PXA27x),y) obj-$(CONFIG_PM) += standby.o diff --git a/arch/arm/mach-pxa/corgi_ssp.c b/arch/arm/mach-pxa/corgi_ssp.c index 591e5f32dbe..bdf10cfa944 100644 --- a/arch/arm/mach-pxa/corgi_ssp.c +++ b/arch/arm/mach-pxa/corgi_ssp.c @@ -203,7 +203,7 @@ static int __init corgi_ssp_probe(struct device *dev) GPDR(ssp_machinfo->cs_ads7846) |= GPIO_bit(ssp_machinfo->cs_ads7846); /* output */ GPSR(ssp_machinfo->cs_ads7846) = GPIO_bit(ssp_machinfo->cs_ads7846); /* High - Disable ADS7846*/ - ret = ssp_init(&corgi_ssp_dev,ssp_machinfo->port); + ret = ssp_init(&corgi_ssp_dev, ssp_machinfo->port, 0); if (ret) printk(KERN_ERR "Unable to register SSP handler!\n"); diff --git a/arch/arm/mach-pxa/ssp.c b/arch/arm/mach-pxa/ssp.c index 4d826c02131..a68b30eff4d 100644 --- a/arch/arm/mach-pxa/ssp.c +++ b/arch/arm/mach-pxa/ssp.c @@ -19,6 +19,8 @@ * 22nd Aug 2003 Initial version. * 20th Dec 2004 Added ssp_config for changing port config without * closing the port. + * 4th Aug 2005 Added option to disable irq handler registration and + * cleaned up irq and clock detection. */ #include @@ -37,6 +39,26 @@ #define PXA_SSP_PORTS 3 +struct ssp_info_ { + int irq; + u32 clock; +}; + +/* + * SSP port clock and IRQ settings + */ +static const struct ssp_info_ ssp_info[PXA_SSP_PORTS] = { +#if defined (CONFIG_PXA27x) + {IRQ_SSP, CKEN23_SSP1}, + {IRQ_SSP2, CKEN3_SSP2}, + {IRQ_SSP3, CKEN4_SSP3}, +#else + {IRQ_SSP, CKEN3_SSP}, + {IRQ_NSSP, CKEN9_NSSP}, + {IRQ_ASSP, CKEN10_ASSP}, +#endif +}; + static DECLARE_MUTEX(sem); static int use_count[PXA_SSP_PORTS] = {0, 0, 0}; @@ -210,9 +232,9 @@ int ssp_config(struct ssp_dev *dev, u32 mode, u32 flags, u32 psp_flags, u32 spee * %-EBUSY if the resources are already in use * %0 on success */ -int ssp_init(struct ssp_dev *dev, u32 port) +int ssp_init(struct ssp_dev *dev, u32 port, u32 init_flags) { - int ret, irq; + int ret; if (port > PXA_SSP_PORTS || port == 0) return -ENODEV; @@ -229,61 +251,20 @@ int ssp_init(struct ssp_dev *dev, u32 port) up(&sem); return -EBUSY; } - - switch (port) { - case 1: - irq = IRQ_SSP; - break; -#if defined (CONFIG_PXA27x) - case 2: - irq = IRQ_SSP2; - break; - case 3: - irq = IRQ_SSP3; - break; -#else - case 2: - irq = IRQ_NSSP; - break; - case 3: - irq = IRQ_ASSP; - break; -#endif - default: - return -ENODEV; - } - dev->port = port; - ret = request_irq(irq, ssp_interrupt, 0, "SSP", dev); - if (ret) - goto out_region; + /* do we need to get irq */ + if (!(init_flags & SSP_NO_IRQ)) { + ret = request_irq(ssp_info[port-1].irq, ssp_interrupt, + 0, "SSP", dev); + if (ret) + goto out_region; + dev->irq = ssp_info[port-1].irq; + } else + dev->irq = 0; /* turn on SSP port clock */ - switch (dev->port) { -#if defined (CONFIG_PXA27x) - case 1: - pxa_set_cken(CKEN23_SSP1, 1); - break; - case 2: - pxa_set_cken(CKEN3_SSP2, 1); - break; - case 3: - pxa_set_cken(CKEN4_SSP3, 1); - break; -#else - case 1: - pxa_set_cken(CKEN3_SSP, 1); - break; - case 2: - pxa_set_cken(CKEN9_NSSP, 1); - break; - case 3: - pxa_set_cken(CKEN10_ASSP, 1); - break; -#endif - } - + pxa_set_cken(ssp_info[port-1].clock, 1); up(&sem); return 0; @@ -301,46 +282,17 @@ out_region: */ void ssp_exit(struct ssp_dev *dev) { - int irq; - down(&sem); SSCR0_P(dev->port) &= ~SSCR0_SSE; - /* find irq, save power and turn off SSP port clock */ - switch (dev->port) { -#if defined (CONFIG_PXA27x) - case 1: - irq = IRQ_SSP; - pxa_set_cken(CKEN23_SSP1, 0); - break; - case 2: - irq = IRQ_SSP2; - pxa_set_cken(CKEN3_SSP2, 0); - break; - case 3: - irq = IRQ_SSP3; - pxa_set_cken(CKEN4_SSP3, 0); - break; -#else - case 1: - irq = IRQ_SSP; - pxa_set_cken(CKEN3_SSP, 0); - break; - case 2: - irq = IRQ_NSSP; - pxa_set_cken(CKEN9_NSSP, 0); - break; - case 3: - irq = IRQ_ASSP; - pxa_set_cken(CKEN10_ASSP, 0); - break; -#endif - default: - printk(KERN_WARNING "SSP: tried to close invalid port\n"); - return; + if (dev->port > PXA_SSP_PORTS || dev->port == 0) { + printk(KERN_WARNING "SSP: tried to close invalid port\n"); + return; } - free_irq(irq, dev); + pxa_set_cken(ssp_info[dev->port-1].clock, 0); + if (dev->irq) + free_irq(dev->irq, dev); release_mem_region(__PREG(SSCR0_P(dev->port)), 0x2c); use_count[dev->port - 1]--; up(&sem); -- cgit v1.2.3 From 94cabd003e989556d8bf84027d96284dc2d99c76 Mon Sep 17 00:00:00 2001 From: Richard Purdie Date: Sat, 12 Nov 2005 18:53:48 +0000 Subject: [ARM] 3149/1: SharpSL: Add Akita (SL-C1000) machine support Patch from Richard Purdie Add the core machine support for the Sharp SL-C1000 (Akita) and enable the Kconfig selection for it. Signed-off-by: Richard Purdie Signed-off-by: Russell King --- arch/arm/mach-pxa/Kconfig | 6 ++++++ arch/arm/mach-pxa/spitz.c | 49 +++++++++++++++++++++++++++++++++++++++++++++++ 2 files changed, 55 insertions(+) (limited to 'arch/arm/mach-pxa') diff --git a/arch/arm/mach-pxa/Kconfig b/arch/arm/mach-pxa/Kconfig index e201aa9765b..cd506646801 100644 --- a/arch/arm/mach-pxa/Kconfig +++ b/arch/arm/mach-pxa/Kconfig @@ -72,6 +72,12 @@ config MACH_HUSKY depends PXA_SHARPSL_25x select PXA_SHARP_C7xx +config MACH_AKITA + bool "Enable Sharp SL-1000 (Akita) Support" + depends PXA_SHARPSL_27x + select PXA_SHARP_Cxx00 + select MACH_SPITZ + config MACH_SPITZ bool "Enable Sharp Zaurus SL-3000 (Spitz) Support" depends PXA_SHARPSL_27x diff --git a/arch/arm/mach-pxa/spitz.c b/arch/arm/mach-pxa/spitz.c index 4e9a699ee42..2df1b56615b 100644 --- a/arch/arm/mach-pxa/spitz.c +++ b/arch/arm/mach-pxa/spitz.c @@ -345,6 +345,16 @@ static void spitz_irda_transceiver_mode(struct device *dev, int mode) reset_scoop_gpio(&spitzscoop2_device.dev, SPITZ_SCP2_IR_ON); } +#ifdef CONFIG_MACH_AKITA +static void akita_irda_transceiver_mode(struct device *dev, int mode) +{ + if (mode & IR_OFF) + akita_set_ioexp(&akitaioexp_device.dev, AKITA_IOEXP_IR_ON); + else + akita_reset_ioexp(&akitaioexp_device.dev, AKITA_IOEXP_IR_ON); +} +#endif + static struct pxaficp_platform_data spitz_ficp_platform_data = { .transceiver_cap = IR_SIRMODE | IR_OFF, .transceiver_mode = spitz_irda_transceiver_mode, @@ -417,6 +427,32 @@ static void __init spitz_init(void) platform_device_register(&spitzscoop2_device); } +#ifdef CONFIG_MACH_AKITA +/* + * Akita IO Expander + */ +struct platform_device akitaioexp_device = { + .name = "akita-ioexp", + .id = -1, +}; + +static void __init akita_init(void) +{ + spitz_ficp_platform_data.transceiver_mode = akita_irda_transceiver_mode; + + /* We just pretend the second element of the array doesn't exist */ + spitz_pcmcia_config.num_devs = 1; + platform_scoop_config = &spitz_pcmcia_config; + spitz_bl_machinfo.set_bl_intensity = akita_bl_set_intensity; + + platform_device_register(&akitaioexp_device); + + spitzscoop_device.dev.parent = &akitaioexp_device.dev; + common_init(); +} +#endif + + static void __init fixup_spitz(struct machine_desc *desc, struct tag *tags, char **cmdline, struct meminfo *mi) { @@ -452,3 +488,16 @@ MACHINE_START(BORZOI, "SHARP Borzoi") .timer = &pxa_timer, MACHINE_END #endif + +#ifdef CONFIG_MACH_AKITA +MACHINE_START(AKITA, "SHARP Akita") + .phys_ram = 0xa0000000, + .phys_io = 0x40000000, + .io_pg_offst = (io_p2v(0x40000000) >> 18) & 0xfffc, + .fixup = fixup_spitz, + .map_io = pxa_map_io, + .init_irq = pxa_init_irq, + .init_machine = akita_init, + .timer = &pxa_timer, +MACHINE_END +#endif -- cgit v1.2.3 From c5e1ae9729d97d3c543cc70d7865df1e724da0d0 Mon Sep 17 00:00:00 2001 From: Richard Purdie Date: Sat, 12 Nov 2005 18:53:48 +0000 Subject: [ARM] 3154/1: SharpSL PM Driver updates Patch from Richard Purdie Updates to the SharpSL PM driver including cleanups from both Pavel Machek and myself and updates after the platform device changes to make it compile again. Signed-off-by: Richard Purdie Signed-off-by: Russell King --- arch/arm/mach-pxa/sharpsl.h | 8 +-- arch/arm/mach-pxa/sharpsl_pm.c | 109 +++++++++++++++++++++-------------------- 2 files changed, 61 insertions(+), 56 deletions(-) (limited to 'arch/arm/mach-pxa') diff --git a/arch/arm/mach-pxa/sharpsl.h b/arch/arm/mach-pxa/sharpsl.h index 4879c0f7da7..b0c40a1d667 100644 --- a/arch/arm/mach-pxa/sharpsl.h +++ b/arch/arm/mach-pxa/sharpsl.h @@ -115,7 +115,7 @@ extern struct battery_thresh spitz_battery_levels_noac[]; #define CHARGE_LED_ERR() sharpsl_pm.machinfo->chargeled(SHARPSL_LED_ERROR) #define DISCHARGE_ON() sharpsl_pm.machinfo->discharge(1) #define DISCHARGE_OFF() sharpsl_pm.machinfo->discharge(0) -#define STATUS_AC_IN sharpsl_pm.machinfo->status_acin() -#define STATUS_BATT_LOCKED READ_GPIO_BIT(sharpsl_pm.machinfo->gpio_batlock) -#define STATUS_CHRG_FULL READ_GPIO_BIT(sharpsl_pm.machinfo->gpio_batfull) -#define STATUS_FATAL READ_GPIO_BIT(sharpsl_pm.machinfo->gpio_fatal) +#define STATUS_AC_IN() sharpsl_pm.machinfo->status_acin() +#define STATUS_BATT_LOCKED() READ_GPIO_BIT(sharpsl_pm.machinfo->gpio_batlock) +#define STATUS_CHRG_FULL() READ_GPIO_BIT(sharpsl_pm.machinfo->gpio_batfull) +#define STATUS_FATAL() READ_GPIO_BIT(sharpsl_pm.machinfo->gpio_fatal) diff --git a/arch/arm/mach-pxa/sharpsl_pm.c b/arch/arm/mach-pxa/sharpsl_pm.c index 6c9e871c53d..c10be00fb52 100644 --- a/arch/arm/mach-pxa/sharpsl_pm.c +++ b/arch/arm/mach-pxa/sharpsl_pm.c @@ -21,7 +21,7 @@ #include #include #include -#include +#include #include #include @@ -45,15 +45,15 @@ #define SHARPSL_WAIT_DISCHARGE_ON 100 /* 100 msec */ #define SHARPSL_CHECK_BATTERY_WAIT_TIME_TEMP 10 /* 10 msec */ #define SHARPSL_CHECK_BATTERY_WAIT_TIME_VOLT 10 /* 10 msec */ -#define SHARPSL_CHECK_BATTERY_WAIT_TIME_JKVAD 10 /* 10 msec */ +#define SHARPSL_CHECK_BATTERY_WAIT_TIME_ACIN 10 /* 10 msec */ #define SHARPSL_CHARGE_WAIT_TIME 15 /* 15 msec */ #define SHARPSL_CHARGE_CO_CHECK_TIME 5 /* 5 msec */ #define SHARPSL_CHARGE_RETRY_CNT 1 /* eqv. 10 min */ #define SHARPSL_CHARGE_ON_VOLT 0x99 /* 2.9V */ #define SHARPSL_CHARGE_ON_TEMP 0xe0 /* 2.9V */ -#define SHARPSL_CHARGE_ON_JKVAD_HIGH 0x9b /* 6V */ -#define SHARPSL_CHARGE_ON_JKVAD_LOW 0x34 /* 2V */ +#define SHARPSL_CHARGE_ON_ACIN_HIGH 0x9b /* 6V */ +#define SHARPSL_CHARGE_ON_ACIN_LOW 0x34 /* 2V */ #define SHARPSL_FATAL_ACIN_VOLT 182 /* 3.45V */ #define SHARPSL_FATAL_NOACIN_VOLT 170 /* 3.40V */ @@ -160,9 +160,10 @@ struct battery_thresh spitz_battery_levels_noac[] = { /* * Prototypes */ -static int sharpsl_read_MainBattery(void); +static int sharpsl_read_main_battery(void); static int sharpsl_off_charge_battery(void); -static int sharpsl_check_battery(int mode); +static int sharpsl_check_battery_temp(void); +static int sharpsl_check_battery_voltage(void); static int sharpsl_ac_check(void); static int sharpsl_fatal_check(void); static int sharpsl_average_value(int ad); @@ -228,7 +229,7 @@ static void sharpsl_battery_thread(void *private_) if (!sharpsl_pm.machinfo) return; - sharpsl_pm.battstat.ac_status = (!(STATUS_AC_IN) ? APM_AC_OFFLINE : APM_AC_ONLINE); + sharpsl_pm.battstat.ac_status = (STATUS_AC_IN() ? APM_AC_ONLINE : APM_AC_OFFLINE); /* Corgi cannot confirm when battery fully charged so periodically kick! */ if (machine_is_corgi() && (sharpsl_pm.charge_mode == CHRG_ON) @@ -236,7 +237,7 @@ static void sharpsl_battery_thread(void *private_) schedule_work(&toggle_charger); while(1) { - voltage = sharpsl_read_MainBattery(); + voltage = sharpsl_read_main_battery(); if (voltage > 0) break; if (i++ > 5) { voltage = sharpsl_pm.machinfo->bat_levels_noac[0].voltage; @@ -317,10 +318,10 @@ static void sharpsl_charge_toggle(void *private_) { dev_dbg(sharpsl_pm.dev, "Toogling Charger at time: %lx\n", jiffies); - if (STATUS_AC_IN == 0) { + if (STATUS_AC_IN() == 0) { sharpsl_charge_off(); return; - } else if ((sharpsl_check_battery(1) < 0) || (sharpsl_ac_check() < 0)) { + } else if ((sharpsl_check_battery_temp() < 0) || (sharpsl_ac_check() < 0)) { sharpsl_charge_error(); return; } @@ -335,7 +336,7 @@ static void sharpsl_charge_toggle(void *private_) static void sharpsl_ac_timer(unsigned long data) { - int acin = STATUS_AC_IN; + int acin = STATUS_AC_IN(); dev_dbg(sharpsl_pm.dev, "AC Status: %d\n",acin); @@ -364,7 +365,7 @@ static void sharpsl_chrg_full_timer(unsigned long data) sharpsl_pm.full_count++; - if (STATUS_AC_IN == 0) { + if (STATUS_AC_IN() == 0) { dev_dbg(sharpsl_pm.dev, "Charge Full: AC removed - stop charging!\n"); if (sharpsl_pm.charge_mode == CHRG_ON) sharpsl_charge_off(); @@ -399,12 +400,12 @@ static irqreturn_t sharpsl_fatal_isr(int irq, void *dev_id, struct pt_regs *fp) { int is_fatal = 0; - if (STATUS_BATT_LOCKED == 0) { + if (STATUS_BATT_LOCKED() == 0) { dev_err(sharpsl_pm.dev, "Battery now Unlocked! Suspending.\n"); is_fatal = 1; } - if (sharpsl_pm.machinfo->gpio_fatal && (STATUS_FATAL == 0)) { + if (sharpsl_pm.machinfo->gpio_fatal && (STATUS_FATAL() == 0)) { dev_err(sharpsl_pm.dev, "Fatal Batt Error! Suspending.\n"); is_fatal = 1; } @@ -461,12 +462,12 @@ static int read_max1111(int channel) | MAXCTRL_SGL | MAXCTRL_UNI | MAXCTRL_STR); } -static int sharpsl_read_MainBattery(void) +static int sharpsl_read_main_battery(void) { return read_max1111(BATT_AD); } -static int sharpsl_read_Temp(void) +static int sharpsl_read_temp(void) { int temp; @@ -480,7 +481,7 @@ static int sharpsl_read_Temp(void) return temp; } -static int sharpsl_read_jkvad(void) +static int sharpsl_read_acin(void) { return read_max1111(JK_VAD); } @@ -522,16 +523,14 @@ static int get_select_val(int *val) return (sum/3); } -/* mode 0 - Check temperature and voltage - * 1 - Check temperature only */ -static int sharpsl_check_battery(int mode) +static int sharpsl_check_battery_temp(void) { int val, i, buff[5]; /* Check battery temperature */ for (i=0; i<5; i++) { mdelay(SHARPSL_CHECK_BATTERY_WAIT_TIME_TEMP); - buff[i] = sharpsl_read_Temp(); + buff[i] = sharpsl_read_temp(); } val = get_select_val(buff); @@ -539,8 +538,13 @@ static int sharpsl_check_battery(int mode) dev_dbg(sharpsl_pm.dev, "Temperature: %d\n", val); if (val > SHARPSL_CHARGE_ON_TEMP) return -1; - if (mode == 1) - return 0; + + return 0; +} + +static int sharpsl_check_battery_voltage(void) +{ + int val, i, buff[5]; /* disable charge, enable discharge */ CHARGE_OFF(); @@ -552,7 +556,7 @@ static int sharpsl_check_battery(int mode) /* Check battery voltage */ for (i=0; i<5; i++) { - buff[i] = sharpsl_read_MainBattery(); + buff[i] = sharpsl_read_main_battery(); mdelay(SHARPSL_CHECK_BATTERY_WAIT_TIME_VOLT); } @@ -575,14 +579,14 @@ static int sharpsl_ac_check(void) int temp, i, buff[5]; for (i=0; i<5; i++) { - buff[i] = sharpsl_read_jkvad(); - mdelay(SHARPSL_CHECK_BATTERY_WAIT_TIME_JKVAD); + buff[i] = sharpsl_read_acin(); + mdelay(SHARPSL_CHECK_BATTERY_WAIT_TIME_ACIN); } temp = get_select_val(buff); dev_dbg(sharpsl_pm.dev, "AC Voltage: %d\n",temp); - if ((temp > SHARPSL_CHARGE_ON_JKVAD_HIGH) || (temp < SHARPSL_CHARGE_ON_JKVAD_LOW)) { + if ((temp > SHARPSL_CHARGE_ON_ACIN_HIGH) || (temp < SHARPSL_CHARGE_ON_ACIN_LOW)) { dev_err(sharpsl_pm.dev, "Error: AC check failed.\n"); return -1; } @@ -591,7 +595,7 @@ static int sharpsl_ac_check(void) } #ifdef CONFIG_PM -static int sharpsl_pm_suspend(struct device *dev, pm_message_t state) +static int sharpsl_pm_suspend(struct platform_device *pdev, pm_message_t state) { sharpsl_pm.flags |= SHARPSL_SUSPENDED; flush_scheduled_work(); @@ -604,7 +608,7 @@ static int sharpsl_pm_suspend(struct device *dev, pm_message_t state) return 0; } -static int sharpsl_pm_resume(struct device *dev) +static int sharpsl_pm_resume(struct platform_device *pdev) { /* Clear the reset source indicators as they break the bootloader upon reboot */ RCSR = 0x0f; @@ -622,7 +626,7 @@ static void corgi_goto_sleep(unsigned long alarm_time, unsigned int alarm_enable dev_dbg(sharpsl_pm.dev, "Offline Charge Activate = %d\n",sharpsl_pm.flags & SHARPSL_DO_OFFLINE_CHRG); /* not charging and AC-IN! */ - if ((sharpsl_pm.flags & SHARPSL_DO_OFFLINE_CHRG) && (STATUS_AC_IN != 0)) { + if ((sharpsl_pm.flags & SHARPSL_DO_OFFLINE_CHRG) && (STATUS_AC_IN() != 0)) { dev_dbg(sharpsl_pm.dev, "Activating Offline Charger...\n"); sharpsl_pm.charge_mode = CHRG_OFF; sharpsl_pm.flags &= ~SHARPSL_DO_OFFLINE_CHRG; @@ -671,7 +675,7 @@ static int corgi_enter_suspend(unsigned long alarm_time, unsigned int alarm_enab dev_dbg(sharpsl_pm.dev, "User triggered wakeup in offline charger.\n"); } - if ((STATUS_BATT_LOCKED == 0) || (sharpsl_fatal_check() < 0) ) + if ((STATUS_BATT_LOCKED() == 0) || (sharpsl_fatal_check() < 0) ) { dev_err(sharpsl_pm.dev, "Fatal condition. Suspend.\n"); corgi_goto_sleep(alarm_time, alarm_enable, state); @@ -711,7 +715,7 @@ static int sharpsl_fatal_check(void) dev_dbg(sharpsl_pm.dev, "sharpsl_fatal_check entered\n"); /* Check AC-Adapter */ - acin = STATUS_AC_IN; + acin = STATUS_AC_IN(); if (acin && (sharpsl_pm.charge_mode == CHRG_ON)) { CHARGE_OFF(); @@ -725,7 +729,7 @@ static int sharpsl_fatal_check(void) /* Check battery : check inserting battery ? */ for (i=0; i<5; i++) { - buff[i] = sharpsl_read_MainBattery(); + buff[i] = sharpsl_read_main_battery(); mdelay(SHARPSL_CHECK_BATTERY_WAIT_TIME_VOLT); } @@ -739,7 +743,7 @@ static int sharpsl_fatal_check(void) } temp = get_select_val(buff); - dev_dbg(sharpsl_pm.dev, "sharpsl_fatal_check: acin: %d, discharge voltage: %d, no discharge: %d\n", acin, temp, sharpsl_read_MainBattery()); + dev_dbg(sharpsl_pm.dev, "sharpsl_fatal_check: acin: %d, discharge voltage: %d, no discharge: %d\n", acin, temp, sharpsl_read_main_battery()); if ((acin && (temp < SHARPSL_FATAL_ACIN_VOLT)) || (!acin && (temp < SHARPSL_FATAL_NOACIN_VOLT))) @@ -771,7 +775,7 @@ static int sharpsl_off_charge_battery(void) dev_dbg(sharpsl_pm.dev, "Offline Charger: Step 1\n"); /* AC Check */ - if ((sharpsl_ac_check() < 0) || (sharpsl_check_battery(1) < 0)) + if ((sharpsl_ac_check() < 0) || (sharpsl_check_battery_temp() < 0)) return sharpsl_off_charge_error(); /* Start Charging */ @@ -793,7 +797,7 @@ static int sharpsl_off_charge_battery(void) dev_dbg(sharpsl_pm.dev, "Offline Charger: Step 2\n"); - if (sharpsl_check_battery(0) < 0) + if ((sharpsl_check_battery_temp() < 0) || (sharpsl_check_battery_voltage() < 0)) return sharpsl_off_charge_error(); CHARGE_OFF(); @@ -811,7 +815,7 @@ static int sharpsl_off_charge_battery(void) /* Check for timeout */ if ((RCNR - time) > SHARPSL_WAIT_CO_TIME) return 1; - if (STATUS_CHRG_FULL) { + if (STATUS_CHRG_FULL()) { dev_dbg(sharpsl_pm.dev, "Offline Charger: Charge full occured. Retrying to check\n"); sharpsl_pm.full_count++; CHARGE_OFF(); @@ -840,7 +844,7 @@ static int sharpsl_off_charge_battery(void) sharpsl_pm.full_count++; return 1; } - if (STATUS_CHRG_FULL) { + if (STATUS_CHRG_FULL()) { dev_dbg(sharpsl_pm.dev, "Offline Charger: Charging complete.\n"); CHARGE_LED_OFF(); CHARGE_OFF(); @@ -886,13 +890,13 @@ static struct pm_ops sharpsl_pm_ops = { .finish = pxa_pm_finish, }; -static int __init sharpsl_pm_probe(struct device *dev) +static int __init sharpsl_pm_probe(struct platform_device *pdev) { - if (!dev->platform_data) + if (!pdev->dev.platform_data) return -EINVAL; - sharpsl_pm.dev = dev; - sharpsl_pm.machinfo = dev->platform_data; + sharpsl_pm.dev = &pdev->dev; + sharpsl_pm.machinfo = pdev->dev.platform_data; sharpsl_pm.charge_mode = CHRG_OFF; sharpsl_pm.flags = 0; @@ -935,8 +939,8 @@ static int __init sharpsl_pm_probe(struct device *dev) else set_irq_type(IRQ_GPIO(sharpsl_pm.machinfo->gpio_batfull),IRQT_RISING); } - device_create_file(dev, &dev_attr_battery_percentage); - device_create_file(dev, &dev_attr_battery_voltage); + device_create_file(&pdev->dev, &dev_attr_battery_percentage); + device_create_file(&pdev->dev, &dev_attr_battery_voltage); apm_get_power_status = sharpsl_apm_get_power_status; @@ -947,12 +951,12 @@ static int __init sharpsl_pm_probe(struct device *dev) return 0; } -static int sharpsl_pm_remove(struct device *dev) +static int sharpsl_pm_remove(struct platform_device *pdev) { pm_set_ops(NULL); - device_remove_file(dev, &dev_attr_battery_percentage); - device_remove_file(dev, &dev_attr_battery_voltage); + device_remove_file(&pdev->dev, &dev_attr_battery_percentage); + device_remove_file(&pdev->dev, &dev_attr_battery_voltage); free_irq(IRQ_GPIO(sharpsl_pm.machinfo->gpio_acin), sharpsl_ac_isr); free_irq(IRQ_GPIO(sharpsl_pm.machinfo->gpio_batlock), sharpsl_fatal_isr); @@ -969,23 +973,24 @@ static int sharpsl_pm_remove(struct device *dev) return 0; } -static struct device_driver sharpsl_pm_driver = { - .name = "sharpsl-pm", - .bus = &platform_bus_type, +static struct platform_driver sharpsl_pm_driver = { .probe = sharpsl_pm_probe, .remove = sharpsl_pm_remove, .suspend = sharpsl_pm_suspend, .resume = sharpsl_pm_resume, + .driver = { + .name = "sharpsl-pm", + }, }; static int __devinit sharpsl_pm_init(void) { - return driver_register(&sharpsl_pm_driver); + return platform_driver_register(&sharpsl_pm_driver); } static void sharpsl_pm_exit(void) { - driver_unregister(&sharpsl_pm_driver); + platform_driver_unregister(&sharpsl_pm_driver); } late_initcall(sharpsl_pm_init); -- cgit v1.2.3 From d72f25b0dfb0807bd758da56a7ed88c0eb6e70d8 Mon Sep 17 00:00:00 2001 From: Richard Purdie Date: Sun, 13 Nov 2005 10:07:46 +0000 Subject: [ARM] 3158/1: SharpSL: Add PM device driver for the SL-C7x0 machines. Patch from Richard Purdie Add a SharpSL PM device driver for the SL-C7x0 machines. Signed-off-by: Richard Purdie Signed-off-by: Russell King --- arch/arm/mach-pxa/Makefile | 2 +- arch/arm/mach-pxa/corgi_pm.c | 228 +++++++++++++++++++++++++++++++++++++++++++ 2 files changed, 229 insertions(+), 1 deletion(-) create mode 100644 arch/arm/mach-pxa/corgi_pm.c (limited to 'arch/arm/mach-pxa') diff --git a/arch/arm/mach-pxa/Makefile b/arch/arm/mach-pxa/Makefile index d210bd5032c..eecc5c19967 100644 --- a/arch/arm/mach-pxa/Makefile +++ b/arch/arm/mach-pxa/Makefile @@ -11,7 +11,7 @@ obj-$(CONFIG_PXA27x) += pxa27x.o obj-$(CONFIG_ARCH_LUBBOCK) += lubbock.o obj-$(CONFIG_MACH_MAINSTONE) += mainstone.o obj-$(CONFIG_ARCH_PXA_IDP) += idp.o -obj-$(CONFIG_PXA_SHARP_C7xx) += corgi.o corgi_ssp.o corgi_lcd.o +obj-$(CONFIG_PXA_SHARP_C7xx) += corgi.o corgi_ssp.o corgi_lcd.o sharpsl_pm.o corgi_pm.o obj-$(CONFIG_PXA_SHARP_Cxx00) += spitz.o corgi_ssp.o corgi_lcd.o obj-$(CONFIG_MACH_POODLE) += poodle.o obj-$(CONFIG_MACH_TOSA) += tosa.o diff --git a/arch/arm/mach-pxa/corgi_pm.c b/arch/arm/mach-pxa/corgi_pm.c new file mode 100644 index 00000000000..599be14754f --- /dev/null +++ b/arch/arm/mach-pxa/corgi_pm.c @@ -0,0 +1,228 @@ +/* + * Battery and Power Management code for the Sharp SL-C7xx + * + * Copyright (c) 2005 Richard Purdie + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include +#include "sharpsl.h" + +static void corgi_charger_init(void) +{ + pxa_gpio_mode(CORGI_GPIO_ADC_TEMP_ON | GPIO_OUT); + pxa_gpio_mode(CORGI_GPIO_CHRG_ON | GPIO_OUT); + pxa_gpio_mode(CORGI_GPIO_CHRG_UKN | GPIO_OUT); + pxa_gpio_mode(CORGI_GPIO_KEY_INT | GPIO_IN); +} + +static void corgi_charge_led(int val) +{ + if (val == SHARPSL_LED_ERROR) { + dev_dbg(sharpsl_pm.dev, "Charge LED Error\n"); + } else if (val == SHARPSL_LED_ON) { + dev_dbg(sharpsl_pm.dev, "Charge LED On\n"); + GPSR0 = GPIO_bit(CORGI_GPIO_LED_ORANGE); + } else { + dev_dbg(sharpsl_pm.dev, "Charge LED Off\n"); + GPCR0 = GPIO_bit(CORGI_GPIO_LED_ORANGE); + } +} + +static void corgi_measure_temp(int on) +{ + if (on) + GPSR(CORGI_GPIO_ADC_TEMP_ON) = GPIO_bit(CORGI_GPIO_ADC_TEMP_ON); + else + GPCR(CORGI_GPIO_ADC_TEMP_ON) = GPIO_bit(CORGI_GPIO_ADC_TEMP_ON); +} + +static void corgi_charge(int on) +{ + if (on) { + if (machine_is_corgi() && (sharpsl_pm.flags & SHARPSL_SUSPENDED)) { + GPCR(CORGI_GPIO_CHRG_ON) = GPIO_bit(CORGI_GPIO_CHRG_ON); + GPSR(CORGI_GPIO_CHRG_UKN) = GPIO_bit(CORGI_GPIO_CHRG_UKN); + } else { + GPSR(CORGI_GPIO_CHRG_ON) = GPIO_bit(CORGI_GPIO_CHRG_ON); + GPCR(CORGI_GPIO_CHRG_UKN) = GPIO_bit(CORGI_GPIO_CHRG_UKN); + } + } else { + GPCR(CORGI_GPIO_CHRG_ON) = GPIO_bit(CORGI_GPIO_CHRG_ON); + GPCR(CORGI_GPIO_CHRG_UKN) = GPIO_bit(CORGI_GPIO_CHRG_UKN); + } +} + +static void corgi_discharge(int on) +{ + if (on) + GPSR(CORGI_GPIO_DISCHARGE_ON) = GPIO_bit(CORGI_GPIO_DISCHARGE_ON); + else + GPCR(CORGI_GPIO_DISCHARGE_ON) = GPIO_bit(CORGI_GPIO_DISCHARGE_ON); +} + +static void corgi_presuspend(void) +{ + int i; + unsigned long wakeup_mask; + + /* charging , so CHARGE_ON bit is HIGH during OFF. */ + if (READ_GPIO_BIT(CORGI_GPIO_CHRG_ON)) + PGSR1 |= GPIO_bit(CORGI_GPIO_CHRG_ON); + else + PGSR1 &= ~GPIO_bit(CORGI_GPIO_CHRG_ON); + + if (READ_GPIO_BIT(CORGI_GPIO_LED_ORANGE)) + PGSR0 |= GPIO_bit(CORGI_GPIO_LED_ORANGE); + else + PGSR0 &= ~GPIO_bit(CORGI_GPIO_LED_ORANGE); + + if (READ_GPIO_BIT(CORGI_GPIO_CHRG_UKN)) + PGSR1 |= GPIO_bit(CORGI_GPIO_CHRG_UKN); + else + PGSR1 &= ~GPIO_bit(CORGI_GPIO_CHRG_UKN); + + /* Resume on keyboard power key */ + PGSR2 = (PGSR2 & ~CORGI_GPIO_ALL_STROBE_BIT) | CORGI_GPIO_STROBE_BIT(0); + + wakeup_mask = GPIO_bit(CORGI_GPIO_KEY_INT) | GPIO_bit(CORGI_GPIO_WAKEUP) | GPIO_bit(CORGI_GPIO_AC_IN) | GPIO_bit(CORGI_GPIO_CHRG_FULL); + + if (!machine_is_corgi()) + wakeup_mask |= GPIO_bit(CORGI_GPIO_MAIN_BAT_LOW); + + PWER = wakeup_mask | PWER_RTC; + PRER = wakeup_mask; + PFER = wakeup_mask; + + for (i = 0; i <=15; i++) { + if (PRER & PFER & GPIO_bit(i)) { + if (GPLR0 & GPIO_bit(i) ) + PRER &= ~GPIO_bit(i); + else + PFER &= ~GPIO_bit(i); + } + } +} + +static void corgi_postsuspend(void) +{ +} + +/* + * Check what brought us out of the suspend. + * Return: 0 to sleep, otherwise wake + */ +static int corgi_should_wakeup(unsigned int resume_on_alarm) +{ + int is_resume = 0; + + dev_dbg(sharpsl_pm.dev, "GPLR0 = %x,%x\n", GPLR0, PEDR); + + if ((PEDR & GPIO_bit(CORGI_GPIO_AC_IN))) { + if (STATUS_AC_IN()) { + /* charge on */ + dev_dbg(sharpsl_pm.dev, "ac insert\n"); + sharpsl_pm.flags |= SHARPSL_DO_OFFLINE_CHRG; + } else { + /* charge off */ + dev_dbg(sharpsl_pm.dev, "ac remove\n"); + CHARGE_LED_OFF(); + CHARGE_OFF(); + sharpsl_pm.charge_mode = CHRG_OFF; + } + } + + if ((PEDR & GPIO_bit(CORGI_GPIO_CHRG_FULL))) + dev_dbg(sharpsl_pm.dev, "Charge full interrupt\n"); + + if (PEDR & GPIO_bit(CORGI_GPIO_KEY_INT)) + is_resume |= GPIO_bit(CORGI_GPIO_KEY_INT); + + if (PEDR & GPIO_bit(CORGI_GPIO_WAKEUP)) + is_resume |= GPIO_bit(CORGI_GPIO_WAKEUP); + + if (resume_on_alarm && (PEDR & PWER_RTC)) + is_resume |= PWER_RTC; + + dev_dbg(sharpsl_pm.dev, "is_resume: %x\n",is_resume); + return is_resume; +} + +static unsigned long corgi_charger_wakeup(void) +{ + return ~GPLR0 & ( GPIO_bit(CORGI_GPIO_AC_IN) | GPIO_bit(CORGI_GPIO_KEY_INT) | GPIO_bit(CORGI_GPIO_WAKEUP) ); +} + +static int corgi_acin_status(void) +{ + return ((GPLR(CORGI_GPIO_AC_IN) & GPIO_bit(CORGI_GPIO_AC_IN)) != 0); +} + +static struct sharpsl_charger_machinfo corgi_pm_machinfo = { + .init = corgi_charger_init, + .gpio_batlock = CORGI_GPIO_BAT_COVER, + .gpio_acin = CORGI_GPIO_AC_IN, + .gpio_batfull = CORGI_GPIO_CHRG_FULL, + .status_acin = corgi_acin_status, + .discharge = corgi_discharge, + .charge = corgi_charge, + .chargeled = corgi_charge_led, + .measure_temp = corgi_measure_temp, + .presuspend = corgi_presuspend, + .postsuspend = corgi_postsuspend, + .charger_wakeup = corgi_charger_wakeup, + .should_wakeup = corgi_should_wakeup, + .bat_levels = 40, + .bat_levels_noac = spitz_battery_levels_noac, + .bat_levels_acin = spitz_battery_levels_acin, + .status_high_acin = 188, + .status_low_acin = 178, + .status_high_noac = 185, + .status_low_noac = 175, +}; + +static struct platform_device *corgipm_device; + +static int __devinit corgipm_init(void) +{ + int ret; + + corgipm_device = platform_device_alloc("sharpsl-pm", -1); + if (!corgipm_device) + return -ENOMEM; + + corgipm_device->dev.platform_data = &corgi_pm_machinfo; + ret = platform_device_add(corgipm_device); + + if (ret) + platform_device_put(corgipm_device); + + return ret; +} + +static void corgipm_exit(void) +{ + platform_device_unregister(corgipm_device); +} + +module_init(corgipm_init); +module_exit(corgipm_exit); -- cgit v1.2.3 From e8b6f7f437a624fc2e2a2ec92fbeffdcf6f0e11e Mon Sep 17 00:00:00 2001 From: Richard Purdie Date: Sun, 13 Nov 2005 10:07:47 +0000 Subject: [ARM] 3159/1: SharpSL: Add PM device driver for the SL-Cx00 machines. Patch from Richard Purdie Add a SharpSL PM device driver for the SL-Cxx00 machines. Signed-off-by: Richard Purdie Signed-off-by: Russell King --- arch/arm/mach-pxa/Makefile | 2 +- arch/arm/mach-pxa/spitz_pm.c | 233 +++++++++++++++++++++++++++++++++++++++++++ 2 files changed, 234 insertions(+), 1 deletion(-) create mode 100644 arch/arm/mach-pxa/spitz_pm.c (limited to 'arch/arm/mach-pxa') diff --git a/arch/arm/mach-pxa/Makefile b/arch/arm/mach-pxa/Makefile index eecc5c19967..c83092e298a 100644 --- a/arch/arm/mach-pxa/Makefile +++ b/arch/arm/mach-pxa/Makefile @@ -12,7 +12,7 @@ obj-$(CONFIG_ARCH_LUBBOCK) += lubbock.o obj-$(CONFIG_MACH_MAINSTONE) += mainstone.o obj-$(CONFIG_ARCH_PXA_IDP) += idp.o obj-$(CONFIG_PXA_SHARP_C7xx) += corgi.o corgi_ssp.o corgi_lcd.o sharpsl_pm.o corgi_pm.o -obj-$(CONFIG_PXA_SHARP_Cxx00) += spitz.o corgi_ssp.o corgi_lcd.o +obj-$(CONFIG_PXA_SHARP_Cxx00) += spitz.o corgi_ssp.o corgi_lcd.o sharpsl_pm.o spitz_pm.o obj-$(CONFIG_MACH_POODLE) += poodle.o obj-$(CONFIG_MACH_TOSA) += tosa.o diff --git a/arch/arm/mach-pxa/spitz_pm.c b/arch/arm/mach-pxa/spitz_pm.c new file mode 100644 index 00000000000..3ce7486daa5 --- /dev/null +++ b/arch/arm/mach-pxa/spitz_pm.c @@ -0,0 +1,233 @@ +/* + * Battery and Power Management code for the Sharp SL-Cxx00 + * + * Copyright (c) 2005 Richard Purdie + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include +#include "sharpsl.h" + +static int spitz_last_ac_status; + +static void spitz_charger_init(void) +{ + pxa_gpio_mode(SPITZ_GPIO_KEY_INT | GPIO_IN); + pxa_gpio_mode(SPITZ_GPIO_SYNC | GPIO_IN); +} + +static void spitz_charge_led(int val) +{ + if (val == SHARPSL_LED_ERROR) { + dev_dbg(sharpsl_pm.dev, "Charge LED Error\n"); + } else if (val == SHARPSL_LED_ON) { + dev_dbg(sharpsl_pm.dev, "Charge LED On\n"); + set_scoop_gpio(&spitzscoop_device.dev, SPITZ_SCP_LED_ORANGE); + } else { + dev_dbg(sharpsl_pm.dev, "Charge LED Off\n"); + reset_scoop_gpio(&spitzscoop_device.dev, SPITZ_SCP_LED_ORANGE); + } +} + +static void spitz_measure_temp(int on) +{ + if (on) + set_scoop_gpio(&spitzscoop_device.dev, SPITZ_SCP_ADC_TEMP_ON); + else + reset_scoop_gpio(&spitzscoop_device.dev, SPITZ_SCP_ADC_TEMP_ON); +} + +static void spitz_charge(int on) +{ + if (on) { + if (sharpsl_pm.flags & SHARPSL_SUSPENDED) { + set_scoop_gpio(&spitzscoop_device.dev, SPITZ_SCP_JK_B); + reset_scoop_gpio(&spitzscoop_device.dev, SPITZ_SCP_CHRG_ON); + } else { + reset_scoop_gpio(&spitzscoop_device.dev, SPITZ_SCP_JK_B); + reset_scoop_gpio(&spitzscoop_device.dev, SPITZ_SCP_CHRG_ON); + } + } else { + reset_scoop_gpio(&spitzscoop_device.dev, SPITZ_SCP_JK_B); + set_scoop_gpio(&spitzscoop_device.dev, SPITZ_SCP_CHRG_ON); + } +} + +static void spitz_discharge(int on) +{ + if (on) + set_scoop_gpio(&spitzscoop_device.dev, SPITZ_SCP_JK_A); + else + reset_scoop_gpio(&spitzscoop_device.dev, SPITZ_SCP_JK_A); +} + +/* HACK - For unknown reasons, accurate voltage readings are only made with a load + on the power bus which the green led on spitz provides */ +static void spitz_discharge1(int on) +{ + if (on) + set_scoop_gpio(&spitzscoop_device.dev, SPITZ_SCP_LED_GREEN); + else + reset_scoop_gpio(&spitzscoop_device.dev, SPITZ_SCP_LED_GREEN); +} + +static void spitz_presuspend(void) +{ + spitz_last_ac_status = STATUS_AC_IN(); + + /* GPIO Sleep Register */ + PGSR0 = 0x00144018; + PGSR1 = 0x00EF0000; + if (machine_is_akita()) { + PGSR2 = 0x2121C000; + PGSR3 = 0x00600400; + } else { + PGSR2 = 0x0121C000; + PGSR3 = 0x00600000; + } + + PGSR0 &= ~SPITZ_GPIO_G0_STROBE_BIT; + PGSR1 &= ~SPITZ_GPIO_G1_STROBE_BIT; + PGSR2 &= ~SPITZ_GPIO_G2_STROBE_BIT; + PGSR3 &= ~SPITZ_GPIO_G3_STROBE_BIT; + PGSR2 |= GPIO_bit(SPITZ_GPIO_KEY_STROBE0); + + pxa_gpio_mode(GPIO18_RDY|GPIO_OUT | GPIO_DFLT_HIGH); + + PRER = GPIO_bit(SPITZ_GPIO_KEY_INT); + PFER = GPIO_bit(SPITZ_GPIO_KEY_INT) | GPIO_bit(SPITZ_GPIO_RESET); + PWER = GPIO_bit(SPITZ_GPIO_KEY_INT) | GPIO_bit(SPITZ_GPIO_RESET) | PWER_RTC; + PKWR = GPIO_bit(SPITZ_GPIO_SYNC) | GPIO_bit(SPITZ_GPIO_KEY_INT) | GPIO_bit(SPITZ_GPIO_RESET); + PKSR = 0xffffffff; // clear + + /* nRESET_OUT Disable */ + PSLR |= PSLR_SL_ROD; + + /* Clear reset status */ + RCSR = RCSR_HWR | RCSR_WDR | RCSR_SMR | RCSR_GPR; + + /* Stop 3.6MHz and drive HIGH to PCMCIA and CS */ + PCFR = PCFR_GPR_EN | PCFR_OPDE; +} + +static void spitz_postsuspend(void) +{ + pxa_gpio_mode(GPIO18_RDY_MD); + pxa_gpio_mode(10 | GPIO_IN); +} + +static int spitz_should_wakeup(unsigned int resume_on_alarm) +{ + int is_resume = 0; + int acin = STATUS_AC_IN(); + + if (spitz_last_ac_status != acin) { + if (acin) { + /* charge on */ + sharpsl_pm.flags |= SHARPSL_DO_OFFLINE_CHRG; + dev_dbg(sharpsl_pm.dev, "AC Inserted\n"); + } else { + /* charge off */ + dev_dbg(sharpsl_pm.dev, "AC Removed\n"); + CHARGE_LED_OFF(); + CHARGE_OFF(); + sharpsl_pm.charge_mode = CHRG_OFF; + } + spitz_last_ac_status = acin; + /* Return to suspend as this must be what we were woken for */ + return 0; + } + + if (PEDR & GPIO_bit(SPITZ_GPIO_KEY_INT)) + is_resume |= GPIO_bit(SPITZ_GPIO_KEY_INT); + + if (PKSR & GPIO_bit(SPITZ_GPIO_SYNC)) + is_resume |= GPIO_bit(SPITZ_GPIO_SYNC); + + if (resume_on_alarm && (PEDR & PWER_RTC)) + is_resume |= PWER_RTC; + + dev_dbg(sharpsl_pm.dev, "is_resume: %x\n",is_resume); + return is_resume; +} + +static unsigned long spitz_charger_wakeup(void) +{ + return (~GPLR0 & GPIO_bit(SPITZ_GPIO_KEY_INT)) | (GPLR0 & GPIO_bit(SPITZ_GPIO_SYNC)); +} + +static int spitz_acin_status(void) +{ + return (((~GPLR(SPITZ_GPIO_AC_IN)) & GPIO_bit(SPITZ_GPIO_AC_IN)) != 0); +} + +struct sharpsl_charger_machinfo spitz_pm_machinfo = { + .init = spitz_charger_init, + .gpio_batlock = SPITZ_GPIO_BAT_COVER, + .gpio_acin = SPITZ_GPIO_AC_IN, + .gpio_batfull = SPITZ_GPIO_CHRG_FULL, + .gpio_fatal = SPITZ_GPIO_FATAL_BAT, + .status_acin = spitz_acin_status, + .discharge = spitz_discharge, + .discharge1 = spitz_discharge1, + .charge = spitz_charge, + .chargeled = spitz_charge_led, + .measure_temp = spitz_measure_temp, + .presuspend = spitz_presuspend, + .postsuspend = spitz_postsuspend, + .charger_wakeup = spitz_charger_wakeup, + .should_wakeup = spitz_should_wakeup, + .bat_levels = 40, + .bat_levels_noac = spitz_battery_levels_noac, + .bat_levels_acin = spitz_battery_levels_acin, + .status_high_acin = 188, + .status_low_acin = 178, + .status_high_noac = 185, + .status_low_noac = 175, +}; + +static struct platform_device *spitzpm_device; + +static int __devinit spitzpm_init(void) +{ + int ret; + + spitzpm_device = platform_device_alloc("sharpsl-pm", -1); + if (!spitzpm_device) + return -ENOMEM; + + spitzpm_device->dev.platform_data = &spitz_pm_machinfo; + ret = platform_device_add(spitzpm_device); + + if (ret) + platform_device_put(spitzpm_device); + + return ret; +} + +static void spitzpm_exit(void) +{ + platform_device_unregister(spitzpm_device); +} + +module_init(spitzpm_init); +module_exit(spitzpm_exit); -- cgit v1.2.3 From bd5d080ab99642e3245ef7cfa54490384c01d878 Mon Sep 17 00:00:00 2001 From: Richard Purdie Date: Sun, 13 Nov 2005 10:07:48 +0000 Subject: [ARM] 3160/1: SharpSL: Add driver for Akita specific GPIOs Patch from Richard Purdie Add a driver for the extra GPIOs found on the Sharp SL-C1000 (Akita). These GPIOs are found on a Maxim MAX7310 I2C i/o expander chip. A generic GPIO driver for the MAX7310 was attempted but this mini driver is a much simpler and much more effective solution avoiding several issues and complexity the generic driver had (as discussed on LKML). The platform device is required so the device parent can be set correctly which ensures the device is one of the last to suspend and first to resume. Whilst the i2c suspend/resume calls can be influenced, nothing guarantees this is easlier/later than the subsystems the gpios are used on which are all independent of i2c (sound, irda, video/backlight etc.). Signed-off-by: Richard Purdie Signed-off-by: Russell King --- arch/arm/mach-pxa/Makefile | 1 + arch/arm/mach-pxa/akita-ioexp.c | 223 ++++++++++++++++++++++++++++++++++++++++ 2 files changed, 224 insertions(+) create mode 100644 arch/arm/mach-pxa/akita-ioexp.c (limited to 'arch/arm/mach-pxa') diff --git a/arch/arm/mach-pxa/Makefile b/arch/arm/mach-pxa/Makefile index c83092e298a..32526a0a6f8 100644 --- a/arch/arm/mach-pxa/Makefile +++ b/arch/arm/mach-pxa/Makefile @@ -13,6 +13,7 @@ obj-$(CONFIG_MACH_MAINSTONE) += mainstone.o obj-$(CONFIG_ARCH_PXA_IDP) += idp.o obj-$(CONFIG_PXA_SHARP_C7xx) += corgi.o corgi_ssp.o corgi_lcd.o sharpsl_pm.o corgi_pm.o obj-$(CONFIG_PXA_SHARP_Cxx00) += spitz.o corgi_ssp.o corgi_lcd.o sharpsl_pm.o spitz_pm.o +obj-$(CONFIG_MACH_AKITA) += akita-ioexp.o obj-$(CONFIG_MACH_POODLE) += poodle.o obj-$(CONFIG_MACH_TOSA) += tosa.o diff --git a/arch/arm/mach-pxa/akita-ioexp.c b/arch/arm/mach-pxa/akita-ioexp.c new file mode 100644 index 00000000000..f6d73cc01f7 --- /dev/null +++ b/arch/arm/mach-pxa/akita-ioexp.c @@ -0,0 +1,223 @@ +/* + * Support for the Extra GPIOs on the Sharp SL-C1000 (Akita) + * (uses a Maxim MAX7310 8 Port IO Expander) + * + * Copyright 2005 Openedhand Ltd. + * + * Author: Richard Purdie + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + */ + +#include +#include +#include +#include +#include +#include +#include +#include + +/* MAX7310 Regiser Map */ +#define MAX7310_INPUT 0x00 +#define MAX7310_OUTPUT 0x01 +#define MAX7310_POLINV 0x02 +#define MAX7310_IODIR 0x03 /* 1 = Input, 0 = Output */ +#define MAX7310_TIMEOUT 0x04 + +/* Addresses to scan */ +static unsigned short normal_i2c[] = { 0x18, I2C_CLIENT_END }; + +/* I2C Magic */ +I2C_CLIENT_INSMOD; + +static int max7310_write(struct i2c_client *client, int address, int data); +static struct i2c_client max7310_template; +static void akita_ioexp_work(void *private_); + +static struct device *akita_ioexp_device; +static unsigned char ioexp_output_value = AKITA_IOEXP_IO_OUT; +DECLARE_WORK(akita_ioexp, akita_ioexp_work, NULL); + + +/* + * MAX7310 Access + */ +static int max7310_config(struct device *dev, int iomode, int polarity) +{ + int ret; + struct i2c_client *client = to_i2c_client(dev); + + ret = max7310_write(client, MAX7310_POLINV, polarity); + if (ret < 0) + return ret; + ret = max7310_write(client, MAX7310_IODIR, iomode); + return ret; +} + +static int max7310_set_ouputs(struct device *dev, int outputs) +{ + struct i2c_client *client = to_i2c_client(dev); + + return max7310_write(client, MAX7310_OUTPUT, outputs); +} + +/* + * I2C Functions + */ +static int max7310_write(struct i2c_client *client, int address, int value) +{ + u8 data[2]; + + data[0] = address & 0xff; + data[1] = value & 0xff; + + if (i2c_master_send(client, data, 2) == 2) + return 0; + return -1; +} + +static int max7310_detect(struct i2c_adapter *adapter, int address, int kind) +{ + struct i2c_client *new_client; + int err; + + if (!(new_client = kmalloc(sizeof(struct i2c_client), GFP_KERNEL))) + return -ENOMEM; + + max7310_template.adapter = adapter; + max7310_template.addr = address; + + memcpy(new_client, &max7310_template, sizeof(struct i2c_client)); + + if ((err = i2c_attach_client(new_client))) { + kfree(new_client); + return err; + } + + max7310_config(&new_client->dev, AKITA_IOEXP_IO_DIR, 0); + akita_ioexp_device = &new_client->dev; + schedule_work(&akita_ioexp); + + return 0; +} + +static int max7310_attach_adapter(struct i2c_adapter *adapter) +{ + return i2c_probe(adapter, &addr_data, max7310_detect); +} + +static int max7310_detach_client(struct i2c_client *client) +{ + int err; + + akita_ioexp_device = NULL; + + if ((err = i2c_detach_client(client))) + return err; + + kfree(client); + return 0; +} + +static struct i2c_driver max7310_i2c_driver = { + .owner = THIS_MODULE, + .name = "akita-max7310", + .id = I2C_DRIVERID_AKITAIOEXP, + .flags = I2C_DF_NOTIFY, + .attach_adapter = max7310_attach_adapter, + .detach_client = max7310_detach_client, +}; + +static struct i2c_client max7310_template = { + name: "akita-max7310", + flags: I2C_CLIENT_ALLOW_USE, + driver: &max7310_i2c_driver, +}; + +void akita_set_ioexp(struct device *dev, unsigned char bit) +{ + ioexp_output_value |= bit; + + if (akita_ioexp_device) + schedule_work(&akita_ioexp); + return; +} + +void akita_reset_ioexp(struct device *dev, unsigned char bit) +{ + ioexp_output_value &= ~bit; + + if (akita_ioexp_device) + schedule_work(&akita_ioexp); + return; +} + +EXPORT_SYMBOL(akita_set_ioexp); +EXPORT_SYMBOL(akita_reset_ioexp); + +static void akita_ioexp_work(void *private_) +{ + if (akita_ioexp_device) + max7310_set_ouputs(akita_ioexp_device, ioexp_output_value); +} + + +#ifdef CONFIG_PM +static int akita_ioexp_suspend(struct platform_device *pdev, pm_message_t state) +{ + flush_scheduled_work(); + return 0; +} + +static int akita_ioexp_resume(struct platform_device *pdev) +{ + schedule_work(&akita_ioexp); + return 0; +} +#else +#define akita_ioexp_suspend NULL +#define akita_ioexp_resume NULL +#endif + +static int __init akita_ioexp_probe(struct platform_device *pdev) +{ + return i2c_add_driver(&max7310_i2c_driver); +} + +static int akita_ioexp_remove(struct platform_device *pdev) +{ + i2c_del_driver(&max7310_i2c_driver); + return 0; +} + +static struct platform_driver akita_ioexp_driver = { + .probe = akita_ioexp_probe, + .remove = akita_ioexp_remove, + .suspend = akita_ioexp_suspend, + .resume = akita_ioexp_resume, + .driver = { + .name = "akita-ioexp", + }, +}; + +static int __init akita_ioexp_init(void) +{ + return platform_driver_register(&akita_ioexp_driver); +} + +static void __exit akita_ioexp_exit(void) +{ + platform_driver_unregister(&akita_ioexp_driver); +} + +MODULE_AUTHOR("Richard Purdie "); +MODULE_DESCRIPTION("Akita IO-Expander driver"); +MODULE_LICENSE("GPL"); + +fs_initcall(akita_ioexp_init); +module_exit(akita_ioexp_exit); + -- cgit v1.2.3 From 0a5709b2dc84140082ea235130a05c05d51f94a2 Mon Sep 17 00:00:00 2001 From: Russell King Date: Wed, 16 Nov 2005 14:51:20 +0000 Subject: [ARM] Include asm/hardware.h instead of asm/arch/hardware.h Rationalise hardware.h include. Signed-off-by: Russell King --- arch/arm/mach-pxa/corgi_lcd.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch/arm/mach-pxa') diff --git a/arch/arm/mach-pxa/corgi_lcd.c b/arch/arm/mach-pxa/corgi_lcd.c index 698eb06545c..6dbcaf114ad 100644 --- a/arch/arm/mach-pxa/corgi_lcd.c +++ b/arch/arm/mach-pxa/corgi_lcd.c @@ -22,7 +22,7 @@ #include #include #include -#include +#include #include #include #include -- cgit v1.2.3 From 067c90481aad752dca9a4685091c0163dec7dfe0 Mon Sep 17 00:00:00 2001 From: Dirk Opfer Date: Mon, 21 Nov 2005 15:17:06 +0000 Subject: [ARM] 3170/1: Sharp SL-6000x: platform device conversion fixup Patch from Dirk Opfer Fix an error in tosa.c after the platform device conversion. Signed-off-by: Dirk Opfer Signed-off-by: Russell King --- arch/arm/mach-pxa/tosa.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch/arm/mach-pxa') diff --git a/arch/arm/mach-pxa/tosa.c b/arch/arm/mach-pxa/tosa.c index c312054dfb8..e4f92efc616 100644 --- a/arch/arm/mach-pxa/tosa.c +++ b/arch/arm/mach-pxa/tosa.c @@ -14,7 +14,7 @@ #include #include -#include +#include #include #include #include -- cgit v1.2.3 From 243077f58f2ae2540e35d8ea01a15f13586d9e9e Mon Sep 17 00:00:00 2001 From: Richard Purdie Date: Mon, 28 Nov 2005 18:08:44 +0000 Subject: [ARM] 3179/1: Update/correct Zaurus Kconfig entries Patch from Richard Purdie Add iWMMX Extentions for the pxa27x based Zaurus models and fix a couple of minor mistakes in the PXA Kconfig file. Signed-off-by: Richard Purdie Signed-off-by: Russell King --- arch/arm/mach-pxa/Kconfig | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'arch/arm/mach-pxa') diff --git a/arch/arm/mach-pxa/Kconfig b/arch/arm/mach-pxa/Kconfig index cd506646801..526acbc3206 100644 --- a/arch/arm/mach-pxa/Kconfig +++ b/arch/arm/mach-pxa/Kconfig @@ -44,6 +44,7 @@ config PXA_SHARPSL_25x config PXA_SHARPSL_27x bool "Sharp PXA270 models (SL-Cxx00)" select PXA27x + select IWMMXT endchoice @@ -60,7 +61,6 @@ config MACH_CORGI bool "Enable Sharp SL-C700 (Corgi) Support" depends PXA_SHARPSL_25x select PXA_SHARP_C7xx - select PXA_SSP config MACH_SHEPHERD bool "Enable Sharp SL-C750 (Shepherd) Support" @@ -90,7 +90,7 @@ config MACH_BORZOI config MACH_TOSA bool "Enable Sharp SL-6000x (Tosa) Support" - depends PXA_SHARPSL + depends PXA_SHARPSL_25x config PXA25x bool -- cgit v1.2.3 From 08af295ba491123d067400228d887ca574aceecd Mon Sep 17 00:00:00 2001 From: Richard Purdie Date: Thu, 1 Dec 2005 15:52:47 +0000 Subject: [ARM] 3188/1: Add missing i2c dependency for Akita Patch from Richard Purdie Akita requires inbuilt kernel i2c support for its GPIOs. Add this requirement to Kconfig and update the defconfig to match. Signed-off-by: Richard Purdie Signed-off-by: Russell King --- arch/arm/mach-pxa/Kconfig | 2 ++ 1 file changed, 2 insertions(+) (limited to 'arch/arm/mach-pxa') diff --git a/arch/arm/mach-pxa/Kconfig b/arch/arm/mach-pxa/Kconfig index 526acbc3206..2a58499c096 100644 --- a/arch/arm/mach-pxa/Kconfig +++ b/arch/arm/mach-pxa/Kconfig @@ -77,6 +77,8 @@ config MACH_AKITA depends PXA_SHARPSL_27x select PXA_SHARP_Cxx00 select MACH_SPITZ + select I2C + select I2C_PXA config MACH_SPITZ bool "Enable Sharp Zaurus SL-3000 (Spitz) Support" -- cgit v1.2.3 From 1ee9530a71686436dbeb5f31dd5b925c39cf71d7 Mon Sep 17 00:00:00 2001 From: Lothar Wassmann Date: Mon, 12 Dec 2005 16:44:05 +0000 Subject: [ARM] 3201/1: PXA27x: Prevent hangup during resume due to inadvertedly enabling MBREQ (replaces: 3198/1) Patch from Lothar Wassmann The patch makes sure, that the ouptut functions of pins are restored before restoring the Alternat Function settings, preventing pins from being intermediately configured for undefined or unwanted alternate functions. Here is the original comment: I've got a PXA270 system that uses GPIO80 as nCS4. This system did hang on resume. Digging into the problem I found that the processor stalled immediately when restoring the GAFR2_U register which restored the alternate function for GPIO80. Since the GPDR registers were restored after the GAFR registers, the offending GPIO was configured as input at this point. Thus the alternate function that was in effect after restoring the GAFR was in fact the input function "MBREQ" instead of the output function "nCS4". The "PXA27x Processor Family Developer's Manual" (Footnote in Table 6-1 on page 6-3) states that: "The MBREQ alternate function must not be enabled until the PSSR[RDH] bit field is cleared. For more details, see Table 3-15, "PSSR Bit Definitions" on page 3-71." There is another note in the Developer's Manual (chapter 24.4.2 "GPIO operation as Alternate Function" on page 24-4) stating that: "Configuring a GPIO for an alternate function that is not defined for it causes unpredictable results." Since some GPIOs have no input function defined, and to prevent inadvertedly programming the MBREQ function on some pin, the GAFR registers should be restored after the GPDR registers have been restored. Additional provisions have to be made when the MBREQ function is actually required. The corresponding GAFR bits should not be restored with the regular GAFR restore, but must be set only after the PSSR bits have been cleared. Signed-off-by: Lothar Wassmann Signed-off-by: Russell King --- arch/arm/mach-pxa/pm.c | 9 +++++---- 1 file changed, 5 insertions(+), 4 deletions(-) (limited to 'arch/arm/mach-pxa') diff --git a/arch/arm/mach-pxa/pm.c b/arch/arm/mach-pxa/pm.c index f74b9af112d..852ea72d8c8 100644 --- a/arch/arm/mach-pxa/pm.c +++ b/arch/arm/mach-pxa/pm.c @@ -155,19 +155,20 @@ int pxa_pm_enter(suspend_state_t state) PSPR = 0; /* restore registers */ + RESTORE_GPLEVEL(0); RESTORE_GPLEVEL(1); RESTORE_GPLEVEL(2); + RESTORE(GPDR0); RESTORE(GPDR1); RESTORE(GPDR2); RESTORE(GAFR0_L); RESTORE(GAFR0_U); RESTORE(GAFR1_L); RESTORE(GAFR1_U); RESTORE(GAFR2_L); RESTORE(GAFR2_U); - RESTORE_GPLEVEL(0); RESTORE_GPLEVEL(1); RESTORE_GPLEVEL(2); - RESTORE(GPDR0); RESTORE(GPDR1); RESTORE(GPDR2); RESTORE(GRER0); RESTORE(GRER1); RESTORE(GRER2); RESTORE(GFER0); RESTORE(GFER1); RESTORE(GFER2); RESTORE(PGSR0); RESTORE(PGSR1); RESTORE(PGSR2); #ifdef CONFIG_PXA27x RESTORE(MDREFR); - RESTORE(GAFR3_L); RESTORE(GAFR3_U); RESTORE_GPLEVEL(3); - RESTORE(GPDR3); RESTORE(GRER3); RESTORE(GFER3); RESTORE(PGSR3); + RESTORE_GPLEVEL(3); RESTORE(GPDR3); + RESTORE(GAFR3_L); RESTORE(GAFR3_U); + RESTORE(GRER3); RESTORE(GFER3); RESTORE(PGSR3); RESTORE(PWER); RESTORE(PCFR); RESTORE(PRER); RESTORE(PFER); RESTORE(PKWR); #endif -- cgit v1.2.3